packages: uboot-sunxi: update Lamobo R1 patch

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47516

1 files changed, 185 insertions, 177 deletions

diff --git a/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff b/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff
index 5dd816c..0f7196f 100644
--- a/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff
+++ b/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff
@@ -1,18 +1,22 @@
-diff -ruN old/arch/arm/dts/Makefile new/arch/arm/dts/Makefile
---- old/arch/arm/dts/Makefile	2015-07-14 19:32:21.000000000 +0200
-+++ new/arch/arm/dts/Makefile	2015-07-31 23:23:33.518767858 +0200
-@@ -107,6 +107,7 @@
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 9c735c6..a32d772 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -103,6 +103,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
+ 	sun7i-a20-ainol-aw1.dtb \
+ 	sun7i-a20-bananapi.dtb \
+ 	sun7i-a20-bananapro.dtb \
++	sun7i-a20-lamobo-r1.dtb \
+ 	sun7i-a20-cubieboard2.dtb \
  	sun7i-a20-cubietruck.dtb \
  	sun7i-a20-hummingbird.dtb \
- 	sun7i-a20-i12-tvbox.dtb \
-+	sun7i-a20-lamobo-r1.dtb \
- 	sun7i-a20-m3.dtb \
- 	sun7i-a20-m5.dtb \
- 	sun7i-a20-mk808c.dtb \
-diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-lamobo-r1.dts
---- old/arch/arm/dts/sun7i-a20-lamobo-r1.dts	1970-01-01 01:00:00.000000000 +0100
-+++ new/arch/arm/dts/sun7i-a20-lamobo-r1.dts	2015-07-31 23:19:30.811206714 +0200
-@@ -0,0 +1,239 @@
+diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+new file mode 100644
+index 0000000..a77fb5c
+--- /dev/null
++++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+@@ -0,0 +1,231 @@
 +/*
 + * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
 + *
@@ -33,11 +37,6 @@ diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-la
 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + *     GNU General Public License for more details.
 + *
-+ *     You should have received a copy of the GNU General Public
-+ *     License along with this file; if not, write to the Free
-+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-+ *     MA 02110-1301 USA
-+ *
 + * Or, alternatively,
 + *
 + *  b) Permission is hereby granted, free of charge, to any person
@@ -71,8 +70,8 @@ diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-la
 +#include <dt-bindings/pinctrl/sun4i-a10.h>
 +
 +/ {
-+	model = "Lamobo R1";
-+	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
++	model = "Lamobo Banana Pi R1";
++	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
 +
 +	aliases {
 +		serial0 = &uart0;
@@ -80,198 +79,207 @@ diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-la
 +		serial2 = &uart7;
 +	};
 +
-+	soc@01c00000 {
-+		spi0: spi@01c05000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&spi0_pins_a>;
-+			status = "okay";
-+		};
++	chosen {
++		stdout-path = "serial0:115200n8";
++	};
 +
-+		mmc0: mmc@01c0f000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
-+			vmmc-supply = <&reg_vcc3v3>;
-+			bus-width = <4>;
-+			cd-gpios = <&pio 7 10 0>; /* PH10 */
-+			cd-inverted;
-+			status = "okay";
-+		};
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&led_pins_bananapi>;
 +
-+		usbphy: phy@01c13400 {
-+			usb1_vbus-supply = <&reg_usb1_vbus>;
-+			usb2_vbus-supply = <&reg_usb2_vbus>;
-+			status = "okay";
++		green {
++			label = "bananapi:green:usr";
++			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 +		};
++	};
 +
-+		ehci0: usb@01c14000 {
-+			status = "okay";
-+		};
++	reg_gmac_3v3: gmac-3v3 {
++		compatible = "regulator-fixed";
++		pinctrl-names = "default";
++		pinctrl-0 = <&gmac_power_pin_bananapi>;
++		regulator-name = "gmac-3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <100000>;
++		enable-active-high;
++		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
++	};
++};
 +
-+		ohci0: usb@01c14400 {
-+			status = "okay";
-+		};
++&ahci {
++	status = "okay";
++};
 +
-+		ahci: sata@01c18000 {
-+			status = "okay";
-+		};
++&ehci0 {
++	status = "okay";
++};
 +
-+		ehci1: usb@01c1c000 {
-+			status = "okay";
-+		};
++&ehci1 {
++	status = "okay";
++};
 +
-+		ohci1: usb@01c1c400 {
-+			status = "okay";
-+		};
++&gmac {
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac_pins_rgmii_a>;
++	phy = <&phy1>;
++	phy-mode = "rgmii";
++	phy-supply = <&reg_gmac_3v3>;
++	status = "okay";
 +
-+		pinctrl@01c20800 {
-+			mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-+				allwinner,pins = "PH10";
-+				allwinner,function = "gpio_in";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <1>;
-+			};
-+
-+			gmac_power_pin_bananapi: gmac_power_pin@0 {
-+				allwinner,pins = "PH23";
-+				allwinner,function = "gpio_out";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
-+
-+			led_pins_bananapi: led_pins@0 {
-+				allwinner,pins = "PH24";
-+				allwinner,function = "gpio_out";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
-+			
-+			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-+				allwinner,pins = "PB3";
-+				allwinner,function = "gpio_out";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
-+			
-+		};
++	phy1: ethernet-phy@1 {
++		reg = <1>;
++	};
++};
 +
++&i2c0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c0_pins_a>;
++	status = "okay";
 +
-+		uart0: serial@01c28000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&uart0_pins_a>;
-+			status = "okay";
-+		};
++	axp209: pmic@34 {
++		compatible = "x-powers,axp209";
++		reg = <0x34>;
++		interrupt-parent = <&nmi_intc>;
++		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 +
-+		uart3: serial@01c28c00 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&uart3_pins_b>;
-+			status = "okay";
-+		};
++		interrupt-controller;
++		#interrupt-cells = <1>;
++	};
++};
 +
-+		uart7: serial@01c29c00 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&uart7_pins_a>;
-+			status = "okay";
-+		};
++&i2c2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c2_pins_a>;
++	status = "okay";
++};
 +
-+		i2c0: i2c@01c2ac00 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&i2c0_pins_a>;
-+			status = "okay";
++&ir0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&ir0_rx_pins_a>;
++	status = "okay";
++};
 +
-+			axp209: pmic@34 {
-+				compatible = "x-powers,axp209";
-+				reg = <0x34>;
-+				interrupt-parent = <&nmi_intc>;
-+				interrupts = <0 8>;
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
++	vmmc-supply = <&reg_vcc3v3>;
++	bus-width = <4>;
++	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
++	cd-inverted;
++	status = "okay";
++};
 +
-+				interrupt-controller;
-+				#interrupt-cells = <1>;
-+			};
-+		};
++&ohci0 {
++	status = "okay";
++};
 +
-+		i2c2: i2c@01c2b400 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&i2c2_pins_a>;
-+			status = "okay";
-+		};
++&ohci1 {
++	status = "okay";
++};
 +
-+		gmac: ethernet@01c50000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&gmac_pins_rgmii_a>;
-+			phy = <&phy1>;
-+			phy-mode = "rgmii";
-+			phy-supply = <&reg_gmac_3v3>;
-+			status = "okay";
-+
-+			phy1: ethernet-phy@1 {
-+				reg = <1>;
-+			};
-+		};
++&pio {
++	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
++		allwinner,pins = "PH10";
++		allwinner,function = "gpio_in";
++		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 +	};
 +
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&led_pins_bananapi>;
-+
-+		green {
-+			label = "bananapi:green:usr";
-+			gpios = <&pio 7 24 0>;
-+		};
++	gmac_power_pin_bananapi: gmac_power_pin@0 {
++		allwinner,pins = "PH23";
++		allwinner,function = "gpio_out";
++		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 +	};
 +
-+	reg_usb1_vbus: usb1-vbus {
-+		status = "okay";
++	led_pins_bananapi: led_pins@0 {
++		allwinner,pins = "PH24";
++		allwinner,function = "gpio_out";
++		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 +	};
 +
-+	reg_usb2_vbus: usb2-vbus {
-+		status = "okay";
-+	};
++	ir0_tx_pins_a: ir0@1 {
++		allwinner,pins = "PB3";
++		allwinner,function = "ir0";
++		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++		};
 +
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gmac_power_pin_bananapi>;
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 7 23 0>;
-+	};
++};
 +
-+	reg_ahci_5v: ahci-5v {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&ahci_pwr_pin_a>;
-+		regulator-name = "ahci-5v";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		enable-active-high;
-+		gpio = <&pio 1 3 0>;
-+		status = "okay";
-+	};
++&reg_usb1_vbus {
++	status = "okay";
 +};
-diff -ruN old/configs/Lamobo_R1_defconfig new/configs/Lamobo_R1_defconfig
---- old/configs/Lamobo_R1_defconfig	1970-01-01 01:00:00.000000000 +0100
-+++ new/configs/Lamobo_R1_defconfig	2015-07-31 23:02:06.000000000 +0200
-@@ -0,0 +1,19 @@
-+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI,SATAPWR=SUNXI_GPB(3)"
-+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
-+CONFIG_GMAC_TX_DELAY=4
++
++&reg_usb2_vbus {
++	status = "okay";
++};
++
++&spi0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi0_pins_a>,
++		    <&spi0_cs0_pins_a>,
++		    <&spi0_cs1_pins_a>;
++	status = "okay";
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_pins_a>;
++	status = "okay";
++};
++
++&uart3 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart3_pins_b>;
++	status = "okay";
++};
++
++&uart7 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart7_pins_a>;
++	status = "okay";
++};
++
++&usbphy {
++	usb1_vbus-supply = <&reg_usb1_vbus>;
++	usb2_vbus-supply = <&reg_usb2_vbus>;
++	status = "okay";
++};
+diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
+index 7a42055..abf2c1c 100644
+--- a/board/sunxi/MAINTAINERS
++++ b/board/sunxi/MAINTAINERS
+@@ -30,6 +30,7 @@ F:	include/configs/sun7i.h
+ F:	configs/A20-OLinuXino_MICRO_defconfig
+ F:	configs/Bananapi_defconfig
+ F:	configs/Bananapro_defconfig
++F:	configs/Lamobo_R1_defconfig
+ F:	configs/i12-tvbox_defconfig
+ F:	configs/Linksprite_pcDuino3_defconfig
+ F:	configs/Linksprite_pcDuino3_fdt_defconfig
+diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
+new file mode 100644
+index 0000000..bf665e7
+--- /dev/null
++++ b/configs/Lamobo_R1_defconfig
+@@ -0,0 +1,17 @@
 +CONFIG_ARM=y
 +CONFIG_ARCH_SUNXI=y
 +CONFIG_MACH_SUN7I=y
 +CONFIG_DRAM_CLK=432
-+CONFIG_DRAM_ZQ=127
-+CONFIG_DRAM_EMR1=4
++CONFIG_GMAC_TX_DELAY=4
++CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
 +CONFIG_ETH_DESIGNWARE=y
-+CONFIG_NETDEVICES=y
-+CONFIG_NET=y
 +# CONFIG_CMD_IMLS is not set
 +# CONFIG_CMD_FLASH is not set
 +# CONFIG_CMD_FPGA is not set
 +CONFIG_DM_SERIAL=y
 +CONFIG_USB=y
 +CONFIG_DM_USB=y
++CONFIG_NETDEVICES=y
++CONFIG_NET=y