ramips: cleanup dts files of mt7621 based boards

Fix a typo in mt7621.dtsi compatible string. Disable spi, sdhci and pci
in mt7621.dtsi and enable the nodes in the indiviual board dts files.
The nodes require further device specific configuration anyway.

Remove the m25p80@0 spi child node from mt7621.dtsi and add the
chunked-io parameter to the individual board dts files. Fix the spi
flash compatible string for the WNDR3700V5.

Drop the mt7621-eval-board compatible string for all boards which are
not the eval board.

Drop the linux,modalias parameter from spi flash node.

Remove the xhci node from board files, it is already enabled in dtsi.
Disable xhci for boards not having usb ports populated.

Signed-off-by: Mathias Kresin <dev@kresin.me>

20 files changed, 130 insertions, 184 deletions

diff --git a/target/linux/ramips/dts/DIR-860L-B1.dts b/target/linux/ramips/dts/DIR-860L-B1.dts
index 5154a4d..98c9d8a 100644
--- a/target/linux/ramips/dts/DIR-860L-B1.dts
+++ b/target/linux/ramips/dts/DIR-860L-B1.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
 	model = "D-Link DIR-860L B1";
 
 	memory@0 {
@@ -69,8 +68,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/FIREWRT.dts b/target/linux/ramips/dts/FIREWRT.dts
index b318e68..1871de9 100644
--- a/target/linux/ramips/dts/FIREWRT.dts
+++ b/target/linux/ramips/dts/FIREWRT.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "Firefly FireWRT";
 
 	memory@0 {
@@ -58,8 +57,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/MT7621.dts b/target/linux/ramips/dts/MT7621.dts
index 4013f3c..83d0c86 100644
--- a/target/linux/ramips/dts/MT7621.dts
+++ b/target/linux/ramips/dts/MT7621.dts
@@ -14,35 +14,33 @@
 	chosen {
 		bootargs = "console=ttyS0,57600";
 	};
+};
 
-	nand@1e003000 {
-		partition@0 {
-			label = "uboot";
-			reg = <0x00000 0x80000>; /* 64 KB */
-		};
+&nand {
+	status = "okay";
 
-		partition@80000 {
-			label = "uboot_env";
-			reg = <0x80000 0x80000>; /* 64 KB */
-		};
+	partition@0 {
+		label = "uboot";
+		reg = <0x00000 0x80000>; /* 64 KB */
+	};
 
-		partition@100000 {
-			label = "factory";
-			reg = <0x100000 0x40000>;
-		};
+	partition@80000 {
+		label = "uboot_env";
+		reg = <0x80000 0x80000>; /* 64 KB */
+	};
 
-		partition@140000 {
-			label = "rootfs";
-			reg = <0x140000 0xec0000>;
-		};
+	partition@100000 {
+		label = "factory";
+		reg = <0x100000 0x40000>;
 	};
-};
 
-&sdhci {
-	status = "okay";
+	partition@140000 {
+		label = "rootfs";
+		reg = <0x140000 0xec0000>;
+	};
 };
 
-&xhci {
+&sdhci {
 	status = "okay";
 };
 
diff --git a/target/linux/ramips/dts/Newifi-D1.dts b/target/linux/ramips/dts/Newifi-D1.dts
index 07950ba..2d128ac 100644
--- a/target/linux/ramips/dts/Newifi-D1.dts
+++ b/target/linux/ramips/dts/Newifi-D1.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "Newifi-D1";
 
 	memory@0 {
@@ -69,14 +68,11 @@
 
 &sdhci {
 	status = "okay";
+
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhci_pins>;
 };
 
-&xhci {
-	status = "okay";
-};
-
 &spi0 {
 	status = "okay";
 
@@ -85,8 +81,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
@@ -139,8 +135,6 @@
 	mtd-mac-address = <&factory 0xe000>;
 };
 
-
-
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
diff --git a/target/linux/ramips/dts/PBR-M1.dts b/target/linux/ramips/dts/PBR-M1.dts
index e278fc5..9a0c713 100644
--- a/target/linux/ramips/dts/PBR-M1.dts
+++ b/target/linux/ramips/dts/PBR-M1.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "PBR-M1";
 
 	memory@0 {
@@ -106,10 +105,6 @@
 	pinctrl-0 = <&sdhci_pins>;
 };
 
-&xhci {
-	status = "okay";
-};
-
 &spi0 {
 	status = "okay";
 
@@ -118,8 +113,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
@@ -172,8 +167,6 @@
 	mtd-mac-address = <&factory 0xe000>;
 };
 
-
-
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
diff --git a/target/linux/ramips/dts/RB750Gr3.dts b/target/linux/ramips/dts/RB750Gr3.dts
index d39a2d1..bf1c2ba 100644
--- a/target/linux/ramips/dts/RB750Gr3.dts
+++ b/target/linux/ramips/dts/RB750Gr3.dts
@@ -1,11 +1,11 @@
 /dts-v1/;
 
 #include "mt7621.dtsi"
+
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "MikroTik RB750Gr3";
 
 	memory@0 {
@@ -65,8 +65,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
@@ -111,11 +111,3 @@
 &sdhci {
 	status = "okay";
 };
-
-&xhci {
-	status = "okay";
-};
-
-&pcie {
-	status = "disabled";
-};
diff --git a/target/linux/ramips/dts/RE6500.dts b/target/linux/ramips/dts/RE6500.dts
index d34e857..3fe875d 100644
--- a/target/linux/ramips/dts/RE6500.dts
+++ b/target/linux/ramips/dts/RE6500.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "Linksys RE6500";
 
 	memory@0 {
@@ -59,8 +58,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80", "en25q64";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
@@ -121,3 +120,7 @@
 &ethernet {
 	mtd-mac-address = <&factory 0x2e>;
 };
+
+&xhci {
+	status = "disabled";
+};
diff --git a/target/linux/ramips/dts/SAP-G3200U3.dts b/target/linux/ramips/dts/SAP-G3200U3.dts
index 9069f7c..7be6e03 100644
--- a/target/linux/ramips/dts/SAP-G3200U3.dts
+++ b/target/linux/ramips/dts/SAP-G3200U3.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "STORYLiNK SAP-G3200U3";
 
 	memory@0 {
@@ -54,8 +53,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80", "en25q64";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/SK-WB8.dts b/target/linux/ramips/dts/SK-WB8.dts
index b50de55..171e837 100644
--- a/target/linux/ramips/dts/SK-WB8.dts
+++ b/target/linux/ramips/dts/SK-WB8.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "SamKnows Whitebox 8";
 
 	memory@0 {
@@ -57,8 +56,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/Timecloud.dts b/target/linux/ramips/dts/Timecloud.dts
index 2d60324..535469a 100644
--- a/target/linux/ramips/dts/Timecloud.dts
+++ b/target/linux/ramips/dts/Timecloud.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "Thunder Timecloud";
 
 	memory@0 {
@@ -54,14 +53,11 @@
 
 &sdhci {
 	status = "okay";
+
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhci_pins>;
 };
 
-&xhci {
-	status = "okay";
-};
-
 &spi0 {
 	status = "okay";
 
@@ -70,8 +66,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/UBNT-ERX.dts b/target/linux/ramips/dts/UBNT-ERX.dts
index 713519d..0b2da95 100644
--- a/target/linux/ramips/dts/UBNT-ERX.dts
+++ b/target/linux/ramips/dts/UBNT-ERX.dts
@@ -5,7 +5,6 @@
 #include "mt7621.dtsi"
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "UBNT-ERX";
 
 	memory@0 {
@@ -17,43 +16,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	nand@1e003000 {
-		status = "okay";
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "u-boot-env";
-			reg = <0x80000 0x60000>;
-			read-only;
-		};
-
-		factory: partition@e0000 {
-			label = "factory";
-			reg = <0xe0000 0x60000>;
-		};
-
-		partition@140000 {
-			label = "kernel1";
-			reg = <0x140000 0x300000>;
-		};
-
-		partition@440000 {
-			label = "kernel2";
-			reg = <0x440000 0x300000>;
-		};
-
-		partition@740000 {
-			label = "ubi";
-			reg = <0x740000 0xf7c0000>;
-		};
-
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -72,6 +34,42 @@
 	mtd-mac-address = <&factory 0x22>;
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x80000>;
+		read-only;
+	};
+
+	partition@80000 {
+		label = "u-boot-env";
+		reg = <0x80000 0x60000>;
+		read-only;
+	};
+
+	factory: partition@e0000 {
+		label = "factory";
+		reg = <0xe0000 0x60000>;
+	};
+
+	partition@140000 {
+		label = "kernel1";
+		reg = <0x140000 0x300000>;
+	};
+
+	partition@440000 {
+		label = "kernel2";
+		reg = <0x440000 0x300000>;
+	};
+
+	partition@740000 {
+		label = "ubi";
+		reg = <0x740000 0xf7c0000>;
+	};
+};
+
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
@@ -81,27 +79,20 @@
 	};
 };
 
-&sdhci {
-	status = "disabled";
-};
-
-&pcie {
-	status = "disabled";
-};
-
 &spi0 {
 	/* This board has 2Mb spi flash soldered in and visible
 	   from manufacturer's firmware.
 	   But this SoC shares spi and nand pins,
 	   and current driver does't handle this sharing well */
 	status = "disabled";
+
 	m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <1>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "spi";
@@ -110,3 +101,7 @@
 		};
 	};
 };
+
+&xhci {
+	status = "disabled";
+};
diff --git a/target/linux/ramips/dts/VR500.dts b/target/linux/ramips/dts/VR500.dts
index 8b5d98f..24bb188 100644
--- a/target/linux/ramips/dts/VR500.dts
+++ b/target/linux/ramips/dts/VR500.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
 	model = "Planex VR500";
 
 	memory@0 {
@@ -40,10 +39,6 @@
 	};
 };
 
-&xhci {
-	status = "okay";
-};
-
 &spi0 {
 	status = "okay";
 
@@ -52,8 +47,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
@@ -88,7 +83,3 @@
 		};
 	};
 };
-
-&pcie {
-	status = "disabled";
-};
diff --git a/target/linux/ramips/dts/WF-2881.dts b/target/linux/ramips/dts/WF-2881.dts
index 2cad0ec..84a14e4 100644
--- a/target/linux/ramips/dts/WF-2881.dts
+++ b/target/linux/ramips/dts/WF-2881.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "NETIS WF-2881";
 
 	memory@0 {
@@ -17,39 +16,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	nand@1e003000 {
-		status = "okay";
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x1000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "config";
-			reg = <0x80000 0x80000>;
-			read-only;
-		};
-
-		factory: partition@100000 {
-			label = "factory";
-			reg = <0x100000 0x40000>;
-			read-only;
-		};
-
-		partition@140000 {
-			label = "firmware";
-			reg = <0x140000 0x7E40000>;
-		};
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -78,8 +44,37 @@
 	};
 };
 
-&spi0 {
-	status="disabled";
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x30000>;
+		read-only;
+	};
+
+	partition@30000 {
+		label = "u-boot-env";
+		reg = <0x30000 0x1000>;
+		read-only;
+	};
+
+	partition@80000 {
+		label = "config";
+		reg = <0x80000 0x80000>;
+		read-only;
+	};
+
+	factory: partition@100000 {
+		label = "factory";
+		reg = <0x100000 0x40000>;
+		read-only;
+	};
+
+	partition@140000 {
+		label = "firmware";
+		reg = <0x140000 0x7E40000>;
+	};
 };
 
 &pcie {
diff --git a/target/linux/ramips/dts/WITI.dts b/target/linux/ramips/dts/WITI.dts
index a82a495..de0c517 100644
--- a/target/linux/ramips/dts/WITI.dts
+++ b/target/linux/ramips/dts/WITI.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "MQmaker WiTi";
 
 	memory@0 {
@@ -43,15 +42,10 @@
 	};
 };
 
-
 &sdhci {
 	status = "okay";
 };
 
-&xhci {
-	status = "okay";
-};
-
 &spi0 {
 	status = "okay";
 
@@ -60,8 +54,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/WNDR3700V5.dts b/target/linux/ramips/dts/WNDR3700V5.dts
index f67c320..b9ca613 100644
--- a/target/linux/ramips/dts/WNDR3700V5.dts
+++ b/target/linux/ramips/dts/WNDR3700V5.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
 	model = "Netgear WNDR3700v5";
 
 	memory@0 {
@@ -71,13 +70,13 @@
 &spi0 {
 	status = "okay";
 
-	m25p80@0 {
+	mx25l12805d@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mx25l12805d";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80", "w25q128";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/WSR-1166.dts b/target/linux/ramips/dts/WSR-1166.dts
index 97a4304..ab6a9a4 100644
--- a/target/linux/ramips/dts/WSR-1166.dts
+++ b/target/linux/ramips/dts/WSR-1166.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
 	model = "Buffalo WSR-1166DHP";
 
 	memory@0 {
@@ -121,8 +120,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
@@ -184,3 +183,7 @@
 		};
 	};
 };
+
+&xhci {
+	status = "disabled";
+};
diff --git a/target/linux/ramips/dts/WSR-600.dts b/target/linux/ramips/dts/WSR-600.dts
index 43f63f6..d5439fa 100644
--- a/target/linux/ramips/dts/WSR-600.dts
+++ b/target/linux/ramips/dts/WSR-600.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
 	model = "Buffalo WSR-600DHP";
 
 	memory@0 {
@@ -121,8 +120,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
@@ -157,3 +156,7 @@
 		};
 	};
 };
+
+&xhci {
+	status = "disabled";
+};
diff --git a/target/linux/ramips/dts/ZBT-WG2626.dts b/target/linux/ramips/dts/ZBT-WG2626.dts
index e926514..a75ca89 100644
--- a/target/linux/ramips/dts/ZBT-WG2626.dts
+++ b/target/linux/ramips/dts/ZBT-WG2626.dts
@@ -5,7 +5,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
 	model = "ZBT-WG2626";
 
 	memory@0 {
@@ -58,8 +57,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/ZBT-WG3526.dtsi b/target/linux/ramips/dts/ZBT-WG3526.dtsi
index 1a4b9d6..e48ef3a 100644
--- a/target/linux/ramips/dts/ZBT-WG3526.dtsi
+++ b/target/linux/ramips/dts/ZBT-WG3526.dtsi
@@ -54,6 +54,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
 
 		partition@0 {
 			label = "u-boot";
diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi
index a8b98ed..6b95c54 100644
--- a/target/linux/ramips/dts/mt7621.dtsi
+++ b/target/linux/ramips/dts/mt7621.dtsi
@@ -3,7 +3,7 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "mediatek,mtk7621-soc";
+	compatible = "mediatek,mt7621-soc";
 
 	cpus {
 		cpu@0 {
@@ -160,7 +160,7 @@
 		};
 
 		spi0: spi@b00 {
-			status = "okay";
+			status = "disabled";
 
 			compatible = "ralink,mt7621-spi";
 			reg = <0xb00 0x100>;
@@ -175,14 +175,6 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi_pins>;
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				spi-max-frequency = <10000000>;
-				m25p,chunked-io = <32>;
-			};
 		};
 
 		gdma: gdma@2800 {
@@ -322,6 +314,8 @@
 	};
 
 	sdhci: sdhci@1E130000 {
+		status = "disabled";
+
 		compatible = "ralink,mt7620-sdhci";
 		reg = <0x1E130000 0x4000>;
 
@@ -427,7 +421,7 @@
 				GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
 				GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
 
-		status = "okay";
+		status = "disabled";
 
 		resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
 		reset-names = "pcie0", "pcie1", "pcie2";