diff options
| author | Mathias Kresin <dev@kresin.me> | 2016-05-20 23:45:59 +0200 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2016-11-29 21:40:16 +0100 |
| commit | 36148d923b72688f825f3c2c540942c91039f7d2 (patch) | |
| tree | 0944a1b31e78afb1ef61c1fec94bbdb0071442fc /Makefile | |
| parent | 0e34459e6b4d7b3753b27cf97f304f86e80155ca (diff) | |
| download | mtk-20170518-36148d923b72688f825f3c2c540942c91039f7d2.zip mtk-20170518-36148d923b72688f825f3c2c540942c91039f7d2.tar.gz mtk-20170518-36148d923b72688f825f3c2c540942c91039f7d2.tar.bz2 | |
uboot-lantiq: Add BT Home Hub 5A support
Based on the submission to the uboot-lantiq repo by Martin Blumenstingl.
Use the ddr_settings.h from the GPL tarball. The NAND boot optimized
one (with memory tuning enabled) doesn't work for the UART boot image.
Use the same mtd layout as the stock u-boot. Add add UBI support.
Use the leds to indicate boot status like it is done with the stock
u-boot. Switch on the red power led if kernel image can't be loaded.
Otherwise switch the green led on.
Make only the ramboot u-boot available. Only this image is required for
the first installation of LEDE.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'Makefile')
0 files changed, 0 insertions, 0 deletions