large target/linux cleanup

SVN-Revision: 2877

9 files changed, 53968 insertions, 0 deletions

diff --git a/openwrt/target/linux/ar7-2.4/Makefile b/openwrt/target/linux/ar7-2.4/Makefile
new file mode 100644
index 0000000..daa7341
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/Makefile
@@ -0,0 +1,66 @@
+include $(TOPDIR)/rules.mk
+
+LINUX_VERSION:=2.4.32
+LINUX_RELEASE:=1
+LINUX_KERNEL_MD5SUM:=38f4d0830e95a20f4bfed17622d5557c
+
+include ../rules.mk
+include ./config
+
+ATM_FIRMWARE_VERSION:=0.4
+ATM_FIRMWARE_DIR=sangam-atm-firmware-$(ATM_FIRMWARE_VERSION)
+
+$(eval $(call KMOD_template,SANGAM_ATM_A,sangam-atm-annex-a,\
+	$(MODULES_DIR)/kernel/drivers/atm/tiatm.o \
+,CONFIG_MIPS_SANGAM_ATM,kmod-atm,60,tiatm, \
+	cp $(BUILD_DIR)/$(ATM_FIRMWARE_DIR)/ar0700xx_a.bin $$(I_SANGAM_ATM_A)/lib/modules/ar0700xx.bin \
+))
+
+$(eval $(call KMOD_template,SANGAM_ATM_B,sangam-atm-annex-b,\
+	$(MODULES_DIR)/kernel/drivers/atm/tiatm.o \
+,CONFIG_MIPS_SANGAM_ATM,kmod-atm,60,tiatm, \
+	cp $(BUILD_DIR)/$(ATM_FIRMWARE_DIR)/ar0700xx_b.bin $$(I_SANGAM_ATM_B)/lib/modules/ar0700xx.bin \
+))
+
+$(eval $(call KMOD_template,CPMAC,cpmac,\
+	$(MODULES_DIR)/kernel/drivers/net/avalanche_cpmac/avalanche_cpmac.o \
+,CONFIG_MIPS_AVALANCHE_CPMAC,,10,avalanche_cpmac))
+
+include ../generic-$(KERNEL)/modules.mk
+include ../kernel.mk
+
+
+$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
+	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
+	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
+	@cp config $(LINUX_DIR)/.config
+	touch $@
+
+
+###############################################
+# ATM firmware for the DSL modem
+###############################################
+
+DOWNLOAD_SITE=http://openwrt.org/downloads/sources
+# extracted from netgear DG834B V1.0.5 GPL release
+ATM_FIRMWARE_FILE=$(ATM_FIRMWARE_DIR).tar.gz
+ATM_FIRMWARE_MD5SUM=8bfcb31109796502d66b11baaeb2fba6
+
+$(DL_DIR)/$(ATM_FIRMWARE_FILE):
+	$(SCRIPT_DIR)/download.pl $(DL_DIR) $(ATM_FIRMWARE_FILE) $(ATM_FIRMWARE_MD5SUM) $(DOWNLOAD_SITE) $(MAKE_TRACE)
+
+$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(ATM_FIRMWARE_FILE)
+$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.drivers-unpacked
+$(LINUX_DIR)/.modules_done: $(LINUX_DIR)/.drivers-unpacked
+
+$(LINUX_DIR)/.drivers-unpacked: $(LINUX_DIR)/.unpacked
+	-mkdir -p $(BUILD_DIR)
+	zcat $(DL_DIR)/$(ATM_FIRMWARE_FILE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+	touch $@
+
+linux-dirclean: drivers-clean
+
+drivers-clean:
+	rm -rf $(BUILD_DIR)/$(ATM_FIRMWARE_DIR)
+
+
diff --git a/openwrt/target/linux/ar7-2.4/config b/openwrt/target/linux/ar7-2.4/config
new file mode 100644
index 0000000..fb4ede0
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/config
@@ -0,0 +1,1082 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_MIPS=y
+CONFIG_MIPS32=y
+# CONFIG_MIPS64 is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_KMOD is not set
+
+#
+# Machine selection
+#
+# CONFIG_ACER_PICA_61 is not set
+CONFIG_AR7=y
+# CONFIG_AR7DB is not set
+# CONFIG_AR7RD is not set
+CONFIG_AR7WRD=y
+CONFIG_AR7_CPU=150
+CONFIG_AR7_SYS=125
+CONFIG_AR7_MEMORY=0x14000000
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_FICMMP is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_COGENT_CSB250 is not set
+# CONFIG_BAGET_MIPS is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_HP_LASERJET is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MAGNUM_4000 is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_PMC_BIG_SUR is not set
+# CONFIG_PMC_STRETCH is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_NEC_OSPREY is not set
+# CONFIG_NEC_EAGLE is not set
+# CONFIG_OLIVETTI_M700 is not set
+# CONFIG_NINO is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_TANBAC_TB0229 is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_IRQ_CPU=y
+CONFIG_NONCOHERENT_IO=y
+CONFIG_SWAP_IO_SPACE=y
+# CONFIG_MIPS_AU1000 is not set
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_VTAG_ICACHE is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+
+#
+# General setup
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_NET=y
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+# CONFIG_TC is not set
+# CONFIG_MCA is not set
+# CONFIG_SBUS is not set
+CONFIG_HOTPLUG=y
+
+#
+# PCMCIA/CardBus support
+#
+# CONFIG_PCMCIA is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_ELF_AOUT is not set
+# CONFIG_MIPS32_COMPAT is not set
+# CONFIG_MIPS32_O32 is not set
+# CONFIG_MIPS32_N32 is not set
+# CONFIG_BINFMT_ELF32 is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_OOM_KILLER is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd"
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_B1 is not set
+CONFIG_MTD_CFI_B2=y
+# CONFIG_MTD_CFI_B4 is not set
+# CONFIG_MTD_CFI_B8 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_CFI_SSTSTD is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_AMDSTD is not set
+# CONFIG_MTD_SHARP is not set
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_AR7=y
+CONFIG_MTD_AR7_DEFAULTS=y
+CONFIG_MTD_AR7_START=0x10000000
+CONFIG_MTD_AR7_LEN=0x400000
+CONFIG_MTD_AR7_BUSWIDTH=2
+# CONFIG_MTD_PB1000 is not set
+# CONFIG_MTD_PB1500 is not set
+# CONFIG_MTD_PB1100 is not set
+# CONFIG_MTD_BOSPORUS is not set
+# CONFIG_MTD_XXS1500 is not set
+# CONFIG_MTD_MTX1 is not set
+# CONFIG_MTD_DB1X00 is not set
+# CONFIG_MTD_PB1550 is not set
+# CONFIG_MTD_HYDROGEN3 is not set
+# CONFIG_MTD_MIRAGE is not set
+# CONFIG_MTD_CSTM_MIPS_IXX is not set
+# CONFIG_MTD_OCELOT is not set
+# CONFIG_MTD_LASAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PCMCIA is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOCPROBE is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_CISS_MONITOR_THREAD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_STATS is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_NETLINK_DEV=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_FILTER is not set
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_NAT=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_TOS=y
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+
+#
+#   IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_FTP=y
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_IRC=y
+CONFIG_IP_NF_CT_ACCT=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_CT_PROTO_GRE=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_SIP=m
+CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_MMS=m
+CONFIG_IP_NF_RTSP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_QUOTA=m
+CONFIG_IP_NF_SET=m
+CONFIG_IP_NF_SET_MAX=256
+CONFIG_IP_NF_SET_HASHSIZE=1024
+CONFIG_IP_NF_MATCH_SET=m
+CONFIG_IP_NF_TARGET_SET=m
+CONFIG_IP_NF_SET_IPMAP=m
+CONFIG_IP_NF_SET_PORTMAP=m
+CONFIG_IP_NF_SET_MACIPMAP=m
+CONFIG_IP_NF_SET_IPHASH=m
+CONFIG_IP_NF_SET_NETHASH=m
+CONFIG_IP_NF_SET_IPTREE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=y
+CONFIG_IP_NF_MATCH_MULTIPORT=y
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_TIME=m
+CONFIG_IP_NF_MATCH_CONDITION=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=y
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_UNCLEAN=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_LAYER7=m
+# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
+CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_MIRROR=m
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_PROTO_GRE=m
+CONFIG_IP_NF_NAT_SIP=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_MMS=m
+CONFIG_IP_NF_NAT_RTSP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=y
+CONFIG_IP_NF_NAT_FTP=y
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=y
+CONFIG_IP_NF_TARGET_IMQ=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=y
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+#   IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+
+#
+#   IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_CONDITION=m
+CONFIG_IP6_NF_MATCH_MAC=m
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_IMQ=m
+# CONFIG_KHTTPD is not set
+
+#
+#    SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+CONFIG_ATM=m
+# CONFIG_ATM_CLIP is not set
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_VLAN_8021Q=y
+
+#
+#  
+#
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+CONFIG_BRIDGE=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_CSZ=m
+CONFIG_NET_SCH_HFSC=m
+# CONFIG_NET_SCH_ATM is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+# CONFIG_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI support
+#
+CONFIG_SCSI=m
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_SD_EXTRA_DEVS=5
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_DEBUG_QUEUES is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AHA1740 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_MEGARAID2 is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_DMA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NCR53C7xx is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PCI2000 is not set
+# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SIM710 is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_IMQ=m
+CONFIG_TUN=m
+CONFIG_NET_RANDOM=y
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MIPS_AVALANCHE_CPMAC=m
+CONFIG_MIPS_CPMAC_INIT_BUF_MALLOC=y
+CONFIG_MIPS_CPMAC_PORTS=1
+CONFIG_AVALANCHE_CPMAC_AUTO=y
+# CONFIG_AVALANCHE_LOW_CPMAC is not set
+# CONFIG_AVALANCHE_HIGH_CPMAC is not set
+# CONFIG_SUNLANCE is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE_MPPC=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
+# CONFIG_ARLAN is not set
+# CONFIG_AIRONET4500 is not set
+# CONFIG_AIRONET4500_NONCS is not set
+# CONFIG_AIRONET4500_PROC is not set
+# CONFIG_HERMES is not set
+
+#
+# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_NET_WIRELESS is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+CONFIG_SHAPER=m
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# ATM drivers
+#
+# CONFIG_ATM_TCP is not set
+CONFIG_MIPS_SANGAM_ATM=m
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input core support
+#
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+# CONFIG_SERIAL_EXTENDED is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_AR7_LED=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=128
+CONFIG_AR7_VLYNQ=y
+CONFIG_VLYNQ_CLK_LOCAL=y
+CONFIG_AR7_VLYNQ_PORTS=2
+CONFIG_AR7_ADAM2=y
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+
+#
+# Input core support is needed for gameports
+#
+
+#
+# Input core support is needed for joysticks
+#
+# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AR7_WDT=y
+CONFIG_SOFT_WATCHDOG=m 
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_GPIO is not set
+# CONFIG_AMD_PM768 is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+
+#
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V2 is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BEFS_DEBUG is not set
+# CONFIG_BFS_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+# CONFIG_UMSDOS_FS is not set
+CONFIG_VFAT_FS=m
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_BBC_ARMLIB is not set
+# CONFIG_JFFS2_BBC_LZO is not set
+CONFIG_JFFS2_BBC_LZARI=y
+# CONFIG_JFFS2_BBC_LZHD is not set
+# CONFIG_JFFS2_BBC_LZSS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_TMPFS=y
+CONFIG_RAMFS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_TRACE is not set
+# CONFIG_XFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_SUNRPC=m
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SMB_NLS is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# Support for USB gadgets
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Bluetooth support
+#
+CONFIG_BLUEZ=m
+CONFIG_BLUEZ_L2CAP=m
+CONFIG_BLUEZ_SCO=m
+CONFIG_BLUEZ_RFCOMM=m
+CONFIG_BLUEZ_RFCOMM_TTY=y
+CONFIG_BLUEZ_BNEP=m
+CONFIG_BLUEZ_BNEP_MC_FILTER=y
+CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BLUEZ_HCIUSB is not set
+CONFIG_BLUEZ_HCIUART=m
+CONFIG_BLUEZ_HCIUART_H4=y
+CONFIG_BLUEZ_HCIUART_BCSP=y
+CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
+# CONFIG_BLUEZ_HCIBFUSB is not set
+# CONFIG_BLUEZ_HCIDTL1 is not set
+# CONFIG_BLUEZ_HCIBT3C is not set
+# CONFIG_BLUEZ_HCIBLUECARD is not set
+# CONFIG_BLUEZ_HCIBTUART is not set
+# CONFIG_BLUEZ_HCIVHCI is not set
+
+#
+# Kernel hacking
+#
+CONFIG_CROSSCOMPILE=y
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_KGDB is not set
+# CONFIG_GDB_CONSOLE is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MIPS_UNCACHED is not set
+CONFIG_LOG_BUF_SHIFT=0
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_FW_LOADER is not set
diff --git a/openwrt/target/linux/ar7-2.4/patches/000-ar7_support.patch b/openwrt/target/linux/ar7-2.4/patches/000-ar7_support.patch
new file mode 100644
index 0000000..0c9c0d3
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/patches/000-ar7_support.patch
@@ -0,0 +1,9549 @@
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile	2005-10-21 16:43:16.316951500 +0200
++++ linux.dev/arch/mips/Makefile	2005-11-10 01:10:45.775570250 +0100
+@@ -369,6 +369,16 @@
+ endif
+ 
+ #
++# Texas Instruments AR7
++#
++
++ifdef CONFIG_AR7
++LIBS		+= arch/mips/ar7/ar7.o
++SUBDIRS		+= arch/mips/ar7
++LOADADDR	+= 0x94020000
++endif
++
++#
+ # DECstation family
+ #
+ ifdef CONFIG_DECSTATION
+diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile
+--- linux.old/arch/mips/ar7/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/Makefile	2005-11-10 01:13:51.443173750 +0100
+@@ -0,0 +1,14 @@
++.S.s:
++	$(CPP) $(AFLAGS) $< -o $*.s
++
++.S.o:
++	$(CC) $(AFLAGS) -c $< -o $*.o
++
++EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_
++O_TARGET := ar7.o
++
++obj-y := tnetd73xx_misc.o misc.o
++export-objs := misc.o irq.o init.o
++obj-y += setup.o irq.o int-handler.o reset.o init.o psp_env.o memory.o promlib.o cmdline.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c
+--- linux.old/arch/mips/ar7/cmdline.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/cmdline.c	2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,88 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
++ */
++#include <linux/init.h>
++#include <linux/string.h>
++
++#include <asm/bootinfo.h>
++
++extern int prom_argc;
++extern int *_prom_argv;
++
++/*
++ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
++ * This macro take care of sign extension.
++ */
++#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
++
++char arcs_cmdline[CL_SIZE];
++#ifdef CONFIG_CMDLINE_BOOL
++char __initdata cfg_cmdline[] = CONFIG_CMDLINE;
++#endif
++
++char * __init prom_getcmdline(void)
++{
++	return &(arcs_cmdline[0]);
++}
++
++
++void  __init prom_init_cmdline(void)
++{
++	char *cp, *end;
++	int actr;
++	char *env_cmdline = prom_getenv("kernel_args");
++	size_t len;
++
++	actr = 1; /* Always ignore argv[0] */
++
++	cp = end = &(arcs_cmdline[0]);
++	end += sizeof(arcs_cmdline);
++
++	if (env_cmdline) {
++		len = strlen(env_cmdline);
++		if (len > end - cp - 1)
++			len = end - cp - 1;
++		strncpy(cp, env_cmdline, len);
++		cp += len;
++		*cp++ = ' ';
++	}
++#ifdef CONFIG_CMDLINE_BOOL
++	else {
++		len = strlen(cfg_cmdline);
++		if (len > end - cp - 1)
++			len = end - cp - 1;
++		strncpy(cp, cfg_cmdline, len);
++		cp += len;
++		*cp++ = ' ';
++	}
++#endif
++
++	while(actr < prom_argc) {
++		len = strlen(prom_argv(actr));
++		if (len > end - cp - 1)
++			break;
++		strncpy(cp, prom_argv(actr), len);
++		cp += len;
++		*cp++ = ' ';
++		actr++;
++	}
++	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
++		--cp;
++	*cp = '\0';
++}
+diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c
+--- linux.old/arch/mips/ar7/init.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/init.c	2005-11-10 01:10:45.795571500 +0100
+@@ -0,0 +1,199 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * PROM library initialisation code.
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++
++#include <asm/io.h>
++#include <asm/mips-boards/prom.h>
++#include <asm/mips-boards/generic.h>
++
++#include <asm/ar7/adam2_env.h>
++
++int prom_argc;
++int *_prom_argv, *_prom_envp;
++
++/* max # of Adam2 environment variables */
++#define MAX_ENV_ENTRY 80
++
++static t_env_var local_envp[MAX_ENV_ENTRY];
++static int env_type = 0;
++int init_debug = 0;
++
++unsigned int max_env_entry;
++
++extern char *prom_psp_getenv(char *envname);
++
++static inline char *prom_adam2_getenv(char *envname)
++{
++	/*
++	 * Return a pointer to the given environment variable.
++	 * In 64-bit mode: we're using 64-bit pointers, but all pointers
++	 * in the PROM structures are only 32-bit, so we need some
++	 * workarounds, if we are running in 64-bit mode.
++	 */
++	int i;
++	t_env_var *env = (t_env_var *) local_envp;
++
++	if (strcmp("bootloader", envname) == 0)
++		return "Adam2";
++
++	i = strlen(envname);
++	while (env->name) {
++		if(strncmp(envname, env->name, i) == 0) {
++			return(env->val);
++		}
++		env++;
++	}
++
++	return NULL;
++}
++
++/* XXX "bootloader" won't be returned.
++ * Better make it an element of local_envp */
++static inline t_env_var *
++prom_adam2_iterenv(t_env_var *env) {
++	if (!env)
++	  env = local_envp;
++	else
++	  env++;
++	if (env - local_envp > MAX_ENV_ENTRY || !env->name)
++	  return 0;
++	return env;
++}
++
++char *prom_getenv(char *envname)
++{
++	if (env_type == 1)
++		return prom_psp_getenv(envname);
++	else
++		return prom_adam2_getenv(envname);
++}
++
++t_env_var *
++prom_iterenv(t_env_var *last)
++{
++	if (env_type == 1)
++	  return 0; /* not yet implemented */
++	return prom_adam2_iterenv(last);
++}
++
++static inline unsigned char str2hexnum(unsigned char c)
++{
++	if (c >= '0' && c <= '9')
++		return c - '0';
++	if (c >= 'a' && c <= 'f')
++		return c - 'a' + 10;
++	return 0; /* foo */
++}
++
++static inline void str2eaddr(unsigned char *ea, unsigned char *str)
++{
++	int i;
++
++	for (i = 0; i < 6; i++) {
++		unsigned char num;
++
++		if((*str == '.') || (*str == ':'))
++			str++;
++		num = str2hexnum(*str++) << 4;
++		num |= (str2hexnum(*str++));
++		ea[i] = num;
++	}
++}
++
++int get_ethernet_addr(char *ethernet_addr)
++{
++	char *ethaddr_str;
++
++	ethaddr_str = prom_getenv("ethaddr");
++	if (!ethaddr_str) {
++		printk("ethaddr not set in boot prom\n");
++		return -1;
++	}
++	str2eaddr(ethernet_addr, ethaddr_str);
++
++	if (init_debug > 1) {
++		int i;
++		printk("get_ethernet_addr: ");
++		for (i=0; i<5; i++)
++			printk("%02x:", (unsigned char)*(ethernet_addr+i));
++		printk("%02x\n", *(ethernet_addr+i));
++	}
++
++	return 0;
++}
++
++struct psbl_rec {
++    unsigned int psbl_size;
++    unsigned int env_base;
++    unsigned int env_size;
++    unsigned int ffs_base;
++    unsigned int ffs_size;
++};
++
++static const char psp_env_version[] = "TIENV0.8";
++
++int __init prom_init(int argc, char **argv, char **envp)
++{
++	int i;
++
++	t_env_var *env = (t_env_var *) envp;
++	struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x94000300));
++	void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
++
++	prom_argc = argc;
++	_prom_argv = (int *)argv;
++	_prom_envp = (int *)envp;
++
++	if(strcmp(psp_env, psp_env_version) == 0) {
++ 		/* PSPBOOT */
++
++		env_type = 1;
++		_prom_envp = psp_env;
++		max_env_entry = (psbl->env_size / 16) - 1;
++	} else {
++		/* Copy what we need locally so we are not dependent on
++		 * bootloader RAM.  In Adam2, the environment parameters
++		 * are in flash but the table that references them is in
++		 * RAM
++		 */
++
++		for(i=0; i < MAX_ENV_ENTRY; i++, env++) {
++			if (env->name) {
++				local_envp[i].name = env->name;
++				local_envp[i].val = env->val;
++			} else {
++				local_envp[i].name = NULL;
++				local_envp[i].val = NULL;
++			}
++		}
++	}
++
++	set_io_port_base(0);
++
++	prom_printf("\nLINUX started...\n");
++	prom_init_cmdline();
++	prom_meminit();
++
++	return 0;
++}
+diff -urN linux.old/arch/mips/ar7/int-handler.S linux.dev/arch/mips/ar7/int-handler.S
+--- linux.old/arch/mips/ar7/int-handler.S	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/int-handler.S	2005-11-10 01:12:43.938955000 +0100
+@@ -0,0 +1,63 @@
++/*
++ * Copyright 2004 PMC-Sierra Inc.
++ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
++ * Adaption for AR7: Enrik Berkhan <enrik@akk.org>
++ *
++ * First-level interrupt dispatcher for the TI AR7
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++#define __ASSEMBLY__
++#include <linux/config.h>
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/*
++ * First level interrupt dispatcher for TI AR7 based boards
++ */
++
++		.align	5
++		NESTED(ar7IRQ, PT_SIZE, sp)
++		SAVE_ALL
++		CLI
++		.set	at
++
++		mfc0	t0, CP0_CAUSE
++		mfc0	t2, CP0_STATUS
++
++		and	t0, t2
++
++		andi	t1, t0, STATUSF_IP2	/* hw0 hardware interrupt */
++		bnez	t1, ll_hw0_irq
++
++		andi	t1, t0, STATUSF_IP7	/* R4k CPU timer */
++		bnez	t1, ll_timer_irq
++
++		.set	reorder
++
++		/* wrong alarm or masked ... */
++		j	spurious_interrupt
++		nop
++		END(ar7IRQ)
++
++		.align	5
++
++ll_hw0_irq:
++		li	a0, 2
++		move	a1, sp
++		jal	do_IRQ
++		j	ret_from_irq
++
++ll_timer_irq:
++		li	a0, 7
++		move	a1, sp
++		jal	do_IRQ
++		j	ret_from_irq
++
++			
+diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c
+--- linux.old/arch/mips/ar7/irq.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/irq.c	2005-11-10 01:12:43.938955000 +0100
+@@ -0,0 +1,427 @@
++/*
++ * Nitin Dhingra, iamnd@ti.com
++ * Copyright (C) 2002 Texas Instruments, Inc.  All rights reserved.
++ *
++ * ########################################################################
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Routines for generic manipulation of the interrupts found on the Texas
++ * Instruments avalanche board
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/interrupt.h>
++
++#include <asm/irq.h>
++#include <asm/mipsregs.h>
++#include <asm/ar7/ar7.h>
++#include <asm/ar7/avalanche_intc.h>
++
++#define shutdown_avalanche_irq	disable_avalanche_irq
++#define mask_and_ack_avalanche_irq   disable_avalanche_irq
++
++static unsigned int startup_avalanche_irq(unsigned int irq);
++static void end_avalanche_irq(unsigned int irq);
++void enable_avalanche_irq(unsigned int irq_nr);
++void disable_avalanche_irq(unsigned int irq_nr);
++void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs);
++
++static struct hw_interrupt_type avalanche_irq_type = {
++	"AR7",
++	startup_avalanche_irq,
++	shutdown_avalanche_irq,
++	enable_avalanche_irq,
++	disable_avalanche_irq,
++	mask_and_ack_avalanche_irq,
++	end_avalanche_irq,
++	NULL
++};
++
++static int ar7_irq_base;
++
++static struct irqaction ar7_hw0_action = {
++    ar7_hw0_interrupt, 0, 0, "AR7 on hw0", NULL, NULL
++};
++
++struct avalanche_ictrl_regs         *avalanche_hw0_icregs;  /* Interrupt control regs (primary)   */
++struct avalanche_exctrl_regs        *avalanche_hw0_ecregs;  /* Exception control regs (secondary) */
++struct avalanche_ipace_regs         *avalanche_hw0_ipaceregs;
++struct avalanche_channel_int_number *avalanche_hw0_chregs;  /* Channel control registers          */
++
++/*
++   This remaps interrupts to exist on other channels than the default
++   channels.  essentially we can use the line # as the index for this
++   array
++ */
++
++static unsigned long line_to_channel[AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
++unsigned long uni_secondary_interrupt = 0;
++
++static void end_avalanche_irq(unsigned int irq)
++{
++	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++		enable_avalanche_irq(irq);
++}
++
++void disable_avalanche_irq(unsigned int irq_nr)
++{
++	unsigned long flags;
++	unsigned long chan_nr=0;
++
++	save_and_cli(flags);
++
++	/* irq_nr represents the line number for the interrupt.  We must
++	 *  disable the channel number associated with that line number.
++	 */
++
++	if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
++		chan_nr = AVINTNUM(irq_nr);                 /*CHECK THIS ALSO*/
++	else
++		chan_nr = line_to_channel[AVINTNUM(irq_nr)];/* WE NEED A LINE TO CHANNEL MAPPING FUNCTION HERE*/
++
++	/* disable the interrupt channel bit */
++
++	/* primary interrupt #'s 0-31 */
++
++	if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
++		avalanche_hw0_icregs->intecr1 = (1 << chan_nr);
++
++	/* primary interrupt #'s 32-39 */
++
++	else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
++			(chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
++		avalanche_hw0_icregs->intecr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++
++	else  /* secondary interrupt #'s 0-31 */
++		avalanche_hw0_ecregs->exiecr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
++
++	restore_flags(flags);
++}
++
++void enable_avalanche_irq(unsigned int irq_nr)
++{
++	unsigned long flags;
++	unsigned long chan_nr=0;
++
++	save_and_cli(flags);
++
++	/* irq_nr represents the line number for the interrupt.  We must
++	 *  disable the channel number associated with that line number.
++	 */
++
++	if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
++		chan_nr = AVINTNUM(irq_nr);
++	else
++		chan_nr = line_to_channel[AVINTNUM(irq_nr)];
++
++	/* enable the interrupt channel  bit */
++
++	/* primary interrupt #'s 0-31 */
++	if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
++		avalanche_hw0_icregs->intesr1 = (1 << chan_nr);
++
++	/* primary interrupt #'s 32 throuth 39 */
++	else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
++			(chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
++		avalanche_hw0_icregs->intesr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++
++	else    /* secondary interrupt #'s 0-31 */
++		avalanche_hw0_ecregs->exiesr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
++
++	restore_flags(flags);
++}
++
++static unsigned int startup_avalanche_irq(unsigned int irq)
++{
++	enable_avalanche_irq(irq);
++	return 0; /* never anything pending */
++}
++
++void __init ar7_irq_init(int base)
++{
++	int i;
++
++	avalanche_hw0_icregs = (struct avalanche_ictrl_regs *)AVALANCHE_ICTRL_REGS_BASE;
++	avalanche_hw0_ecregs = (struct avalanche_exctrl_regs *)AVALANCHE_ECTRL_REGS_BASE;
++	avalanche_hw0_ipaceregs = (struct avalanche_ipace_regs *)AVALANCHE_IPACE_REGS_BASE;
++	avalanche_hw0_chregs = (struct avalanche_channel_int_number *)AVALANCHE_CHCTRL_REGS_BASE;
++
++	/*  Disable interrupts and clear pending
++	 */
++
++	avalanche_hw0_icregs->intecr1 = 0xffffffff;    /* disable interrupts 0:31  */
++	avalanche_hw0_icregs->intcr1 = 0xffffffff;     /* clear interrupts 0:31    */
++	avalanche_hw0_icregs->intecr2 = 0xff;          /* disable interrupts 32:39 */
++	avalanche_hw0_icregs->intcr2 = 0xff;           /* clear interrupts 32:39   */
++	avalanche_hw0_ecregs->exiecr = 0xffffffff;     /* disable secondary interrupts 0:31 */
++	avalanche_hw0_ecregs->excr = 0xffffffff;       /* clear secondary interrupts 0:31 */
++
++
++	// avalanche_hw0_ipaceregs->ipacep = (2*get_avalanche_vbus_freq()/1000000)*4;
++	/* hack for speeding up the pacing. */
++	printk("the pacing pre-scalar has been set as 600.\n");
++	avalanche_hw0_ipaceregs->ipacep = 600;
++	/* Channel to line mapping, Line to Channel mapping */
++
++	for(i = 0; i < 40; i++)
++		avalanche_int_set(i,i);
++
++	ar7_irq_base = base;
++	for (i = base; i <= base+40; i++)
++	{
++		irq_desc[i].status	= IRQ_DISABLED;
++		irq_desc[i].action	= 0;
++		irq_desc[i].depth	= 1;
++		irq_desc[i].handler	= &avalanche_irq_type;
++	}
++
++	setup_irq(2, &ar7_hw0_action);
++	set_c0_status(IE_IRQ0);
++
++	return;
++}
++
++void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs)
++{
++	int irq;
++	unsigned long int_line_number, status;
++	int i, chan_nr = 0;
++
++	int_line_number = ((avalanche_hw0_icregs->pintir >> 16) & 0x3F);
++	chan_nr = ((avalanche_hw0_icregs->pintir) & 0x3F);
++
++	if(chan_nr < 32) /* primary 0-31 */
++	{
++		if( chan_nr != uni_secondary_interrupt)
++			avalanche_hw0_icregs->intcr1 = (1<<chan_nr);
++
++	}
++
++	if((chan_nr < 40) && (chan_nr > 31)) /* primary 32-39 */
++	{
++		avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-32));
++	}
++
++
++	/* If the Priority Interrupt Index Register returns 40  then no
++	 * interrupts are pending
++	 */
++
++	if(chan_nr == 40)
++		return;
++
++	if(chan_nr == uni_secondary_interrupt) /* secondary 0-31 */
++	{
++		status = avalanche_hw0_ecregs->exsr;
++		for(i=0; i < 32; i++)
++		{
++			if (status & 1<<i)
++			{
++				/* clear secondary interrupt */
++				avalanche_hw0_ecregs->excr = 1 << i;
++				break;
++			}
++		}
++		irq = i+40;
++
++		/* clear the universal secondary interrupt */
++		avalanche_hw0_icregs->intcr1 = 1 << uni_secondary_interrupt;
++
++	}
++	else
++		irq = chan_nr;
++
++	do_IRQ(irq + ar7_irq_base, regs);
++	return;
++}
++
++void avalanche_int_set(int channel, int line)
++{
++	switch(channel)
++	{
++		case(0):
++			avalanche_hw0_chregs->cintnr0 =  line;
++			break;
++		case(1):
++			avalanche_hw0_chregs->cintnr1 =  line;
++			break;
++		case(2):
++			avalanche_hw0_chregs->cintnr2 =  line;
++			break;
++		case(3):
++			avalanche_hw0_chregs->cintnr3 =  line;
++			break;
++		case(4):
++			avalanche_hw0_chregs->cintnr4 =  line;
++			break;
++		case(5):
++			avalanche_hw0_chregs->cintnr5 =  line;
++			break;
++		case(6):
++			avalanche_hw0_chregs->cintnr6 =  line;
++			break;
++		case(7):
++			avalanche_hw0_chregs->cintnr7 =  line;
++			break;
++		case(8):
++			avalanche_hw0_chregs->cintnr8 =  line;
++			break;
++		case(9):
++			avalanche_hw0_chregs->cintnr9 =  line;
++			break;
++		case(10):
++			avalanche_hw0_chregs->cintnr10 = line;
++			break;
++		case(11):
++			avalanche_hw0_chregs->cintnr11 = line;
++			break;
++		case(12):
++			avalanche_hw0_chregs->cintnr12 = line;
++			break;
++		case(13):
++			avalanche_hw0_chregs->cintnr13 = line;
++			break;
++		case(14):
++			avalanche_hw0_chregs->cintnr14 = line;
++			break;
++		case(15):
++			avalanche_hw0_chregs->cintnr15 = line;
++			break;
++		case(16):
++			avalanche_hw0_chregs->cintnr16 = line;
++			break;
++		case(17):
++			avalanche_hw0_chregs->cintnr17 = line;
++			break;
++		case(18):
++			avalanche_hw0_chregs->cintnr18 = line;
++			break;
++		case(19):
++			avalanche_hw0_chregs->cintnr19 = line;
++			break;
++		case(20):
++			avalanche_hw0_chregs->cintnr20 = line;
++			break;
++		case(21):
++			avalanche_hw0_chregs->cintnr21 = line;
++			break;
++		case(22):
++			avalanche_hw0_chregs->cintnr22 = line;
++			break;
++		case(23):
++			avalanche_hw0_chregs->cintnr23 = line;
++			break;
++		case(24):
++			avalanche_hw0_chregs->cintnr24 = line;
++			break;
++		case(25):
++			avalanche_hw0_chregs->cintnr25 = line;
++			break;
++		case(26):
++			avalanche_hw0_chregs->cintnr26 = line;
++			break;
++		case(27):
++			avalanche_hw0_chregs->cintnr27 = line;
++			break;
++		case(28):
++			avalanche_hw0_chregs->cintnr28 = line;
++			break;
++		case(29):
++			avalanche_hw0_chregs->cintnr29 = line;
++			break;
++		case(30):
++			avalanche_hw0_chregs->cintnr30 = line;
++			break;
++		case(31):
++			avalanche_hw0_chregs->cintnr31 = line;
++			break;
++		case(32):
++			avalanche_hw0_chregs->cintnr32 = line;
++			break;
++		case(33):
++			avalanche_hw0_chregs->cintnr33 = line;
++			break;
++		case(34):
++			avalanche_hw0_chregs->cintnr34 = line;
++			break;
++		case(35):
++			avalanche_hw0_chregs->cintnr35 = line;
++			break;
++		case(36):
++			avalanche_hw0_chregs->cintnr36 = line;
++			break;
++		case(37):
++			avalanche_hw0_chregs->cintnr37 = line;
++			break;
++		case(38):
++			avalanche_hw0_chregs->cintnr38 = line;
++			break;
++		case(39):
++			avalanche_hw0_chregs->cintnr39 = line;
++			break;
++		default:
++			printk("Error: Unknown Avalanche interrupt channel\n");
++	}
++
++	line_to_channel[line] = channel; /* Suraj check */
++
++	if (channel == UNIFIED_SECONDARY_INTERRUPT)
++		uni_secondary_interrupt = line;
++
++}
++
++
++#define AVALANCHE_MAX_PACING_BLK   3
++#define AVALANCHE_PACING_LOW_VAL   2
++#define AVALANCHE_PACING_HIGH_VAL 63
++
++int avalanche_request_pacing(int irq_nr, unsigned int blk_num,
++                            unsigned int pace_value)
++{
++    unsigned int  blk_offset;
++    unsigned long flags;
++
++    if(irq_nr < MIPS_EXCEPTION_OFFSET &&
++       irq_nr >= AVALANCHE_INT_END_PRIMARY)
++        return (0);
++
++    if(blk_num > AVALANCHE_MAX_PACING_BLK)
++        return(-1);
++
++    if(pace_value > AVALANCHE_PACING_HIGH_VAL &&
++       pace_value < AVALANCHE_PACING_LOW_VAL)
++       return(-1);
++
++    blk_offset = blk_num*8;
++
++    save_and_cli(flags);
++
++    /* disable the interrupt pacing, if enabled previously */
++    avalanche_hw0_ipaceregs->ipacemax &= ~(0xff << blk_offset);
++
++    /* clear the pacing map */
++    avalanche_hw0_ipaceregs->ipacemap &= ~(0xff << blk_offset);
++
++    /* setup the new values */
++    avalanche_hw0_ipaceregs->ipacemap |= ((AVINTNUM(irq_nr))   << blk_offset);
++    avalanche_hw0_ipaceregs->ipacemax |= ((0x80 | pace_value)  << blk_offset);
++
++    restore_flags(flags);
++
++    return(0);
++}
+diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c
+--- linux.old/arch/mips/ar7/memory.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/memory.c	2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,103 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
++ *
++ * ########################################################################
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++
++#include <asm/bootinfo.h>
++#include <asm/page.h>
++#include <asm/mips-boards/prom.h>
++
++extern char _ftext;
++extern int preserve_adam2;
++
++void __init prom_meminit(void)
++{
++	char *memsize_str;
++	unsigned long memsize, adam2size;
++
++	/* assume block before kernel is used by bootloader */
++	adam2size = __pa(&_ftext) - PHYS_OFFSET;
++
++	memsize_str = prom_getenv("memsize");
++	if (!memsize_str) {
++		memsize = 0x02000000;
++	} else {
++		memsize = simple_strtol(memsize_str, NULL, 0);
++	}
++
++#if 0
++	add_memory_region(0x00000000, PHYS_OFFSET, BOOT_MEM_RESERVED);
++#endif
++	add_memory_region(PHYS_OFFSET, adam2size, BOOT_MEM_ROM_DATA);
++	add_memory_region(PHYS_OFFSET+adam2size, memsize-adam2size,
++			  BOOT_MEM_RAM);
++}
++
++unsigned long __init prom_free_prom_memory (void)
++{
++	int i;
++	unsigned long freed = 0;
++	unsigned long addr;
++
++	if (preserve_adam2) {
++		char *firstfree_str = prom_getenv("firstfreeaddress");
++		unsigned long firstfree = 0;
++
++		if (firstfree_str)
++			firstfree = simple_strtol(firstfree_str, NULL, 0);
++
++		if (firstfree && firstfree < (unsigned long)&_ftext) {
++			printk("Preserving ADAM2 memory.\n");
++		} else if (firstfree) {
++			printk("Can't preserve ADAM2 memory, "
++			       "firstfreeaddress = %08lx.\n", firstfree);
++			preserve_adam2 = 0;
++		} else {
++			printk("Can't preserve ADAM2 memory, "
++			       "firstfreeaddress unknown!\n");
++			preserve_adam2 = 0;
++		}
++	}
++
++	if (!preserve_adam2) {
++		for (i = 0; i < boot_mem_map.nr_map; i++) {
++			if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
++				continue;
++
++			addr = boot_mem_map.map[i].addr;
++			while (addr < boot_mem_map.map[i].addr
++				+ boot_mem_map.map[i].size) {
++				ClearPageReserved(virt_to_page(__va(addr)));
++				set_page_count(virt_to_page(__va(addr)), 1);
++				free_page((unsigned long)__va(addr));
++				addr += PAGE_SIZE;
++				freed += PAGE_SIZE;
++			}
++		}
++		printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
++	}
++	return freed >> PAGE_SHIFT;
++}
+diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c
+--- linux.old/arch/mips/ar7/misc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/misc.c	2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,322 @@
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/avalanche_misc.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++
++#define TRUE 1
++
++static unsigned int avalanche_vbus_freq;
++
++REMOTE_VLYNQ_DEV_RESET_CTRL_FN p_remote_vlynq_dev_reset_ctrl = NULL;
++
++/*****************************************************************************
++ * Reset Control Module.
++ *****************************************************************************/
++void avalanche_reset_ctrl(unsigned int module_reset_bit, 
++                          AVALANCHE_RESET_CTRL_T reset_ctrl)
++{
++    volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++   
++    if(module_reset_bit >= 32 && module_reset_bit < 64)
++        return;
++
++    if(module_reset_bit >= 64)
++    {
++        if(p_remote_vlynq_dev_reset_ctrl) {
++            p_remote_vlynq_dev_reset_ctrl(module_reset_bit - 64, reset_ctrl);
++	    return;
++	}
++        else
++            return;
++    }
++    
++    if(reset_ctrl == OUT_OF_RESET)
++        *reset_reg |= 1 << module_reset_bit;
++    else
++        *reset_reg &= ~(1 << module_reset_bit);
++    return;
++}
++
++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(unsigned int module_reset_bit)
++{
++    volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++
++    return (((*reset_reg) & (1 << module_reset_bit)) ? OUT_OF_RESET : IN_RESET );
++}
++
++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode)
++{
++    volatile unsigned int *sw_reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_SWRCR;
++    *sw_reset_reg =  mode;
++}
++
++#define AVALANCHE_RST_CTRL_RSR_MASK 0x3
++
++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status()
++{
++    volatile unsigned int *sys_reset_status = (unsigned int*) AVALANCHE_RST_CTRL_RSR;
++
++    return ( (AVALANCHE_SYS_RESET_STATUS_T) (*sys_reset_status & AVALANCHE_RST_CTRL_RSR_MASK) );
++}
++
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++#define AVALANCHE_GLOBAL_POWER_DOWN_MASK    0x3FFFFFFF      /* bit 31, 30 masked */
++#define AVALANCHE_GLOBAL_POWER_DOWN_BIT     30              /* shift to bit 30, 31 */
++
++
++void avalanche_power_ctrl(unsigned int module_power_bit, AVALANCHE_POWER_CTRL_T power_ctrl)
++{
++    volatile unsigned int *power_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++    if (power_ctrl == POWER_CTRL_POWER_DOWN)
++        /* power down the module */
++        *power_reg |= (1 << module_power_bit);
++    else
++        /* power on the module */
++        *power_reg &= (~(1 << module_power_bit));
++}
++
++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int module_power_bit)
++{
++    volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++    return (((*power_status_reg) & (1 << module_power_bit)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP);
++}
++
++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode)
++{
++    volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++    *power_status_reg &= AVALANCHE_GLOBAL_POWER_DOWN_MASK;
++    *power_status_reg |= ( power_mode << AVALANCHE_GLOBAL_POWER_DOWN_BIT);
++}
++
++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void)
++{
++    volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++    return((AVALANCHE_SYS_POWER_MODE_T) (((*power_status_reg) & (~AVALANCHE_GLOBAL_POWER_DOWN_MASK)) 
++                                           >> AVALANCHE_GLOBAL_POWER_DOWN_BIT));
++}
++
++/*****************************************************************************
++ * GPIO  Control
++ *****************************************************************************/
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_init
++ ***************************************************************************/
++void avalanche_gpio_init(void)
++{
++    spinlock_t closeLock;
++    unsigned int closeFlag;
++    volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++    spin_lock_irqsave(&closeLock, closeFlag);
++    *reset_reg |= (1 << AVALANCHE_GPIO_RESET_BIT);
++    spin_unlock_irqrestore(&closeLock, closeFlag);  
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_ctrl
++ ***************************************************************************/
++int avalanche_gpio_ctrl(unsigned int gpio_pin,
++                        AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++                        AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction)
++{
++    spinlock_t closeLock;
++    unsigned int closeFlag;
++    volatile unsigned int *gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_ENBL;
++
++    if(gpio_pin >= 32)
++        return(-1);
++
++    spin_lock_irqsave(&closeLock, closeFlag);
++
++    if(pin_mode == GPIO_PIN)
++    {
++        *gpio_ctrl |= (1 << gpio_pin);
++
++	gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_DIR;
++        
++        if(pin_direction == GPIO_INPUT_PIN)
++            *gpio_ctrl |=  (1 << gpio_pin);
++        else
++            *gpio_ctrl &= ~(1 << gpio_pin);
++    }
++    else /* FUNCTIONAL PIN */
++    {
++        *gpio_ctrl &= ~(1 << gpio_pin);
++    }
++  
++    spin_unlock_irqrestore(&closeLock, closeFlag);  
++
++    return (0);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_out
++ ***************************************************************************/
++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value)
++{
++    spinlock_t closeLock;
++    unsigned int closeFlag;
++    volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
++ 
++    if(gpio_pin >= 32)
++        return(-1);
++    
++    spin_lock_irqsave(&closeLock, closeFlag);
++    if(value == TRUE)
++        *gpio_out |= 1 << gpio_pin;
++    else
++	*gpio_out &= ~(1 << gpio_pin);
++    spin_unlock_irqrestore(&closeLock, closeFlag);
++
++    return(0);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_in
++ ***************************************************************************/
++int avalanche_gpio_in_bit(unsigned int gpio_pin)
++{
++    spinlock_t closeLock;
++    unsigned int closeFlag;
++    volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
++    int ret_val = 0;
++    
++    if(gpio_pin >= 32)
++        return(-1);
++
++    spin_lock_irqsave(&closeLock, closeFlag); 
++    ret_val = ((*gpio_in) & (1 << gpio_pin));
++    spin_unlock_irqrestore(&closeLock, closeFlag);
++ 
++    return (ret_val);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_out_val
++ ***************************************************************************/
++int avalanche_gpio_out_value(unsigned int out_val, unsigned int out_mask, 
++                           unsigned int reg_index)
++{
++    spinlock_t closeLock;
++    unsigned int closeFlag;
++    volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
++
++    if(reg_index > 0)
++        return(-1);
++
++    spin_lock_irqsave(&closeLock, closeFlag);
++    *gpio_out &= ~out_mask;
++    *gpio_out |= out_val;
++    spin_unlock_irqrestore(&closeLock, closeFlag);
++
++    return(0);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_in_value
++ ***************************************************************************/
++int avalanche_gpio_in_value(unsigned int* in_val, unsigned int reg_index)
++{
++    spinlock_t closeLock;
++    unsigned int closeFlag;
++    volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
++ 
++    if(reg_index > 0)
++        return(-1);
++
++    spin_lock_irqsave(&closeLock, closeFlag);
++    *in_val = *gpio_in;
++    spin_unlock_irqrestore(&closeLock, closeFlag);
++
++    return (0);
++}
++
++/***********************************************************************
++ *
++ *    Wakeup Control Module for TNETV1050 Communication Processor
++ *
++ ***********************************************************************/
++
++#define AVALANCHE_WAKEUP_POLARITY_BIT   16
++
++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
++                           AVALANCHE_WAKEUP_CTRL_T      wakeup_ctrl,
++                           AVALANCHE_WAKEUP_POLARITY_T  wakeup_polarity)
++{
++    volatile unsigned int *wakeup_status_reg = (unsigned int*) AVALANCHE_WAKEUP_CTRL_WKCR;
++
++    /* enable/disable */
++    if (wakeup_ctrl == WAKEUP_ENABLED)
++        /* enable wakeup */
++        *wakeup_status_reg |= wakeup_int;
++    else
++        /* disable wakeup */
++        *wakeup_status_reg &= (~wakeup_int);
++
++    /* set polarity */
++    if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
++        *wakeup_status_reg |=  (wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
++    else
++        *wakeup_status_reg &= ~(wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
++}
++
++void avalanche_set_vbus_freq(unsigned int new_vbus_freq)
++{
++    avalanche_vbus_freq = new_vbus_freq;
++}
++
++unsigned int avalanche_get_vbus_freq()
++{
++    return(avalanche_vbus_freq);
++}
++
++unsigned int avalanche_get_chip_version_info()
++{
++    return(*(volatile unsigned int*)AVALANCHE_CVR);
++}
++
++SET_MDIX_ON_CHIP_FN_T p_set_mdix_on_chip_fn = NULL;
++
++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation)
++{
++    if(p_set_mdix_on_chip_fn)
++        return (p_set_mdix_on_chip_fn(base_addr, operation));
++    else
++        return(-1);
++}
++
++unsigned int avalanche_is_mdix_on_chip(void)
++{
++    return(p_set_mdix_on_chip_fn ? 1:0);
++}
++
++EXPORT_SYMBOL(avalanche_reset_ctrl);
++EXPORT_SYMBOL(avalanche_get_reset_status);
++EXPORT_SYMBOL(avalanche_sys_reset);
++EXPORT_SYMBOL(avalanche_get_sys_last_reset_status);
++EXPORT_SYMBOL(avalanche_power_ctrl);
++EXPORT_SYMBOL(avalanche_get_power_status);
++EXPORT_SYMBOL(avalanche_set_global_power_mode);
++EXPORT_SYMBOL(avalanche_get_global_power_mode);
++EXPORT_SYMBOL(avalanche_set_mdix_on_chip);
++EXPORT_SYMBOL(avalanche_is_mdix_on_chip);
++
++EXPORT_SYMBOL(avalanche_gpio_init);
++EXPORT_SYMBOL(avalanche_gpio_ctrl);
++EXPORT_SYMBOL(avalanche_gpio_out_bit);
++EXPORT_SYMBOL(avalanche_gpio_in_bit);
++EXPORT_SYMBOL(avalanche_gpio_out_value);
++EXPORT_SYMBOL(avalanche_gpio_in_value);
++
++EXPORT_SYMBOL(avalanche_set_vbus_freq);
++EXPORT_SYMBOL(avalanche_get_vbus_freq);
++
++EXPORT_SYMBOL(avalanche_get_chip_version_info);
++
+diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h
+--- linux.old/arch/mips/ar7/platform.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/platform.h	2005-11-10 01:10:45.799571750 +0100
+@@ -0,0 +1,65 @@
++#ifndef _PLATFORM_H_
++#define _PLATFORM_H_
++
++#include <linux/config.h>
++
++
++/* Important: The definition of ENV_SPACE_SIZE should match with that in
++ * PSPBoot. (/psp_boot/inc/psbl/env.h)
++ */
++#ifdef CONFIG_MIPS_AVALANCHE_TICFG
++#define ENV_SPACE_SIZE      (10 * 1024)
++#endif
++
++#ifdef CONFIG_MIPS_TNETV1050SDB
++#define TNETV1050SDB
++#define DUAL_FLASH
++#endif
++
++#ifdef CONFIG_MIPS_AR7DB
++#define TNETD73XX_BOARD
++#define AR7DB
++#endif
++
++#ifdef CONFIG_MIPS_AR7RD
++#define TNETD73XX_BOARD
++#define AR7RD
++#endif
++
++#ifdef CONFIG_AR7WRD
++#define TNETD73XX_BOARD
++#define AR7WRD
++#endif
++
++#ifdef CONFIG_MIPS_AR7VWI
++#define TNETD73XX_BOARD
++#define AR7VWi
++#endif
++
++/* Merging from the DEV_DSL-PSPL4.3.2.7_Patch release. */
++#ifdef CONFIG_MIPS_AR7VW
++#define TNETD73XX_BOARD
++#define AR7WRD
++#endif
++
++#ifdef CONFIG_MIPS_AR7WI
++#define TNETD73XX_BOARD
++#define AR7Wi
++#endif
++
++#ifdef CONFIG_MIPS_AR7V
++#define TNETD73XX_BOARD
++#define AR7V
++#endif
++
++#ifdef CONFIG_MIPS_AR7V
++#define TNETD73XX_BOARD
++#define AR7V
++#endif
++
++#ifdef CONFIG_MIPS_WA1130
++#define AVALANCHE
++#define WLAN
++#endif
++
++#endif
+diff -urN linux.old/arch/mips/ar7/promlib.c linux.dev/arch/mips/ar7/promlib.c
+--- linux.old/arch/mips/ar7/promlib.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/promlib.c	2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,48 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Putting things on the screen/serial line using Adam2 facilities.
++ */
++
++#include <linux/types.h>
++#include <asm/addrspace.h>
++
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR \
++          (AVALANCHE_YAMON_FUNCTION_BASE + 1 * 0x4)
++#define AVALANCHE_YAMON_PROM_EXIT \
++          (AVALANCHE_YAMON_FUNCTION_BASE + 8 * 0x4)
++
++void prom_putchar(char c)
++{
++ 	static char buf[1];
++	void (*prom_print_str)(unsigned int dummy, char *s, int len) =
++	  (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR);
++
++	buf[0] = c;
++	prom_print_str(1, buf, 1);
++	return;
++}
++
++void adam2_exit(int retval)
++{
++	void (*yamon_exit)(int retval) =
++	  (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_EXIT);
++
++	yamon_exit(retval);
++	return;
++}
+diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c
+--- linux.old/arch/mips/ar7/psp_env.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/psp_env.c	2005-11-10 01:10:45.799571750 +0100
+@@ -0,0 +1,350 @@
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <asm/io.h>
++
++#include "platform.h"
++
++#define ENV_CELL_SIZE           16
++
++/* control field decode */
++#define ENV_GARBAGE_BIT                 0x01    /* Env is garbage if this bit is off */
++#define ENV_DYNAMIC_BIT                 0x02    /* Env is dynamic if this bit is off */
++
++#define ENV_CTRL_MASK                   0x03
++#define ENV_PREFINED                    (ENV_GARBAGE_BIT | ENV_DYNAMIC_BIT)
++#define ENV_DYNAMIC                     (ENV_GARBAGE_BIT)
++
++struct env_variable {
++    unsigned char   varNum;
++    unsigned char   ctrl;
++    unsigned short  chksum;
++    unsigned char   numCells;
++    unsigned char   data[ENV_CELL_SIZE - 5];    /* The data section starts
++                                                 * here, continues for
++                                                 * numCells.
++                                                 */
++};
++
++extern unsigned int max_env_entry;
++
++/* Internal macros */
++#define get_next_block(var)    ((struct env_variable *)( (char*)(var) + (var)->numCells * ENV_CELL_SIZE))
++
++typedef enum ENV_VARS {
++        env_vars_start = 0,
++        CPUFREQ,
++        MEMSZ,
++        FLASHSZ,
++        MODETTY0,
++        MODETTY1,
++        PROMPT,
++        BOOTCFG,
++        HWA_0,
++#if !defined (AVALANCHE) || defined(TNETC401B)
++        HWA_1,
++#endif
++#if !defined(TNETV1020_BOARD)
++        HWA_RNDIS,
++#endif
++#if defined (TNETD73XX_BOARD)
++        HWA_3,
++#endif
++        IPA,
++        IPA_SVR,
++        BLINE_MAC0,
++#if !defined (AVALANCHE) || defined(TNETC401B)
++        BLINE_MAC1,
++#endif
++#if !defined(TNETV1020_BOARD)
++        BLINE_RNDIS,
++#endif
++#if defined (TNETD73XX_BOARD)
++        BLINE_ATM,
++#endif
++#if !defined(TNETV1020_BOARD)
++        USB_PID,
++        USB_VID,
++        USB_EPPOLLI,
++#endif
++        IPA_GATEWAY,
++        SUBNET_MASK,
++#if defined (TNETV1050_BOARD)
++	BLINE_ESWITCH,
++#endif
++#if !defined(TNETV1020_BOARD)
++	USB_SERIAL,
++	HWA_HRNDIS,      /* Host (PC) side RNDIS address */
++#endif
++	REMOTE_USER,
++	REMOTE_PASS,
++	REMOTE_DIR,
++	SYSFREQ,
++	LINK_TIMEOUT,
++#ifndef AVALANCHE     /* Avalanche boards use only one mac port */
++	MAC_PORT,
++#endif
++	PATH,
++	HOSTNAME,
++#ifdef WLAN
++	HW_REV_MAJOR,
++	HW_REV_MINOR,
++	HW_PATCH,
++	SW_PATCH,
++	SERIAL_NUMBER,
++#endif
++	TFTPCFG,
++#if defined (TNETV1050_BOARD)
++	HWA_ESWITCH,
++#endif
++        /*
++         * Add new env variables here.
++         * NOTE: New environment variables should always be placed at the end, ie
++         *       just before env_vars_end.
++         */
++
++        env_vars_end
++} ENV_VARS;
++
++
++struct env_description {
++        ENV_VARS   idx;
++        char      *nm;
++	char      *alias;
++};
++
++#define ENVSTR(x)         #x
++#define _ENV_ENTRY(x)     {.idx = x, .nm = ENVSTR(x), .alias = NULL}
++
++struct env_description env_ns[] = {
++        _ENV_ENTRY(env_vars_start), /* start. */
++        _ENV_ENTRY(CPUFREQ),
++        _ENV_ENTRY(MEMSZ),
++        _ENV_ENTRY(FLASHSZ),
++        _ENV_ENTRY(MODETTY0),
++        _ENV_ENTRY(MODETTY1),
++        _ENV_ENTRY(PROMPT),
++        _ENV_ENTRY(BOOTCFG),
++        _ENV_ENTRY(HWA_0),
++#if !defined (AVALANCHE) || defined(TNETC401B)
++        _ENV_ENTRY(HWA_1),
++#endif
++#if !defined(TNETV1020_BOARD)
++        _ENV_ENTRY(HWA_RNDIS),
++#endif
++#if defined (TNETD73XX_BOARD)
++        _ENV_ENTRY(HWA_3),
++#endif
++        _ENV_ENTRY(IPA),
++        _ENV_ENTRY(IPA_SVR),
++        _ENV_ENTRY(IPA_GATEWAY),
++        _ENV_ENTRY(SUBNET_MASK),
++        _ENV_ENTRY(BLINE_MAC0),
++#if !defined (AVALANCHE) || defined(TNETC401B)
++        _ENV_ENTRY(BLINE_MAC1),
++#endif
++#if !defined(TNETV1020_BOARD)
++        _ENV_ENTRY(BLINE_RNDIS),
++#endif
++#if defined (TNETD73XX_BOARD)
++        _ENV_ENTRY(BLINE_ATM),
++#endif
++#if !defined(TNETV1020_BOARD)
++        _ENV_ENTRY(USB_PID),
++        _ENV_ENTRY(USB_VID),
++        _ENV_ENTRY(USB_EPPOLLI),
++#endif
++#if defined (TNETV1050_BOARD)
++        _ENV_ENTRY(BLINE_ESWITCH),
++#endif
++#if !defined(TNETV1020_BOARD)
++        _ENV_ENTRY(USB_SERIAL),
++        _ENV_ENTRY(HWA_HRNDIS),
++#endif
++	_ENV_ENTRY(REMOTE_USER),
++	_ENV_ENTRY(REMOTE_PASS),
++	_ENV_ENTRY(REMOTE_DIR),
++	_ENV_ENTRY(SYSFREQ),
++	_ENV_ENTRY(LINK_TIMEOUT),
++#ifndef AVALANCHE       /* Avalanche boards use only one mac port */
++	_ENV_ENTRY(MAC_PORT),
++#endif
++	_ENV_ENTRY(PATH),
++	_ENV_ENTRY(HOSTNAME),
++#ifdef WLAN
++	_ENV_ENTRY(HW_REV_MAJOR),
++	_ENV_ENTRY(HW_REV_MINOR),
++	_ENV_ENTRY(HW_PATCH),
++	_ENV_ENTRY(SW_PATCH),
++	_ENV_ENTRY(SERIAL_NUMBER),
++#endif
++	_ENV_ENTRY(TFTPCFG),
++#if defined (TNETV1050_BOARD)
++	_ENV_ENTRY(HWA_ESWITCH),
++#endif
++        /*
++         * Add new entries below this.
++         */
++	/* Adam2 environment name alias. */
++	{ .idx = IPA,      .nm = "my_ipaddress" },
++	{ .idx = CPUFREQ,  .nm = "cpufrequency" },
++	{ .idx = SYSFREQ,  .nm = "sysfrequency" },
++	{ .idx = HWA_0,    .nm = "maca" },
++#ifndef AVALANCHE
++	{ .idx = HWA_1,    .nm = "macb" },
++#endif
++        { .idx = MODETTY0, .nm = "modetty0" },
++        { .idx = MODETTY1, .nm = "modetty1" },
++	{ .idx = MEMSZ,    .nm = "memsize" },
++
++        _ENV_ENTRY(env_vars_end) /* delimiter. */
++};
++
++static inline int var_to_idx(const char* var)
++{
++	int ii;
++
++	/* go over the list of pre-defined environment variables */
++        for (ii = env_vars_start; env_ns[ii].idx != env_vars_end; ii++){
++		/* check if the env variable is listed */
++                if (strcmp(env_ns[ii].nm, var) == 0) {
++				return env_ns[ii].idx;
++		}
++
++		/* if an alias is present, check if the alias matches
++		 * the description
++		 */
++		if (env_ns[ii].alias != NULL) {
++			if (strcmp(env_ns[ii].alias, var) == 0)	{
++				return env_ns[ii].idx;
++			}
++		}
++	}
++	return 0;
++}
++
++extern int *_prom_envp;
++
++/* FIXME: reading from the flash is extremly unstable. Sometime a read returns garbage,
++ *        the next read some seconds later is ok. It looks like something is hidding or
++ *        overlay the flash address at 0xb0000000. Is this possible?
++ *
++ *        The readb() and while() usage below is a attempt of a workarround - with limited success.
++ */
++
++static inline struct env_variable* get_var_by_number(int index)
++{
++	struct env_variable *env_var = (struct env_variable *)_prom_envp;
++	volatile unsigned char nr;
++	int i;
++
++	env_var++;              /* skip signature */
++
++	i = 0;
++	nr = readb(&(env_var->varNum));
++
++	while (i < max_env_entry && nr != 0xFF) {
++		if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_PREFINED) {
++			if (nr == index) {
++				return env_var;
++			}
++		}
++		i++;
++		env_var = get_next_block(env_var);
++		nr = readb(&(env_var->varNum));
++        }
++
++	return NULL;
++}
++
++static inline struct env_variable* get_var_by_name(char *var)
++{
++	struct env_variable *env_var = (struct env_variable *)_prom_envp;
++	volatile unsigned char nr;
++	int i;
++
++	env_var++;              /* skip signature */
++
++	nr = readb(&(env_var->varNum));
++	i = 0;
++
++	while (i < max_env_entry && nr != 0xFF) {
++		if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
++			if (strcmp(var, env_var->data) == 0)
++				return env_var;
++		}
++		i++;
++		env_var = get_next_block(env_var);
++		nr = readb(&(env_var->varNum));
++        }
++	return NULL;
++}
++
++static inline struct env_variable* get_var(char *var)
++{
++	int index = var_to_idx(var);
++
++	if (index)
++		return get_var_by_number(index);
++	else
++		return get_var_by_name(var);
++
++	return NULL;
++}
++
++static inline char *get_value(struct env_variable* env_var)
++{
++	unsigned char *name;
++	unsigned char *value;
++	unsigned short chksum;
++	int i;
++
++	chksum = env_var->varNum + env_var->ctrl + env_var->numCells;
++
++	if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
++		name  = env_var->data;
++		value = env_var->data + strlen(name) + 1;
++
++		for(i = 0; i < strlen(name); i++)
++			chksum += name[i];
++	} else
++		value = env_var->data;
++
++	for (i = 0; i < strlen(value); i++)
++		chksum += value[i];
++
++	chksum += env_var->chksum;
++	chksum = ~(chksum);
++
++	if(chksum != 0) {
++		return NULL;
++	}
++
++	return value;
++}
++
++struct psbl_rec {
++    unsigned int psbl_size;
++    unsigned int env_base;
++    unsigned int env_size;
++    unsigned int ffs_base;
++    unsigned int ffs_size;
++};
++
++char *prom_psp_getenv(char *envname)
++{
++    struct env_variable* env_var;
++    char *value;
++
++    if (strcmp("bootloader", envname) == 0)
++	    return "PSPBoot";
++
++    if (!(env_var = get_var(envname)))
++	    return NULL;
++
++    value = get_value(env_var);
++
++    return value;
++}
+diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c
+--- linux.old/arch/mips/ar7/reset.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/reset.c	2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,98 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
++ *
++ * ########################################################################
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Reset the AR7 boards.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <asm/mipsregs.h>
++#include <asm/reboot.h>
++#include <asm/addrspace.h>
++
++int preserve_adam2 = 1;
++
++extern void adam2_exit(int retval);
++
++static void ar7_machine_restart(char *command);
++static void ar7_machine_halt(void);
++static void ar7_machine_power_off(void);
++
++static void ar7_machine_restart(char *command)
++{
++	volatile uint32_t *softres_reg = (void *)(KSEG1ADDR(0x08611600 + 0x4));
++
++	*softres_reg = 1;
++}
++
++static void ar7_machine_halt(void)
++{
++
++	if (preserve_adam2) {
++		set_c0_status(ST0_BEV);
++		adam2_exit(0);
++	} else {
++		/* I'd like to have Alt-SysRq-b work in this state.
++		 * What's missing here? The timer interrupt is still running.
++		 * Why doesn't the UART work anymore? */
++		while(1) {
++		  __asm__(".set\tmips3\n\t"
++			  "wait\n\t"
++			  ".set\tmips0");
++		}
++	}
++}
++
++static void ar7_machine_power_off(void)
++{
++	volatile uint32_t *power_reg = (void *)(KSEG1ADDR(0x08610A00));
++	uint32_t power_state = *power_reg;
++
++	/* add something to turn LEDs off? */
++
++	power_state &= ~(3 << 30);
++	power_state |=  (3 << 30); /* power down */
++	*power_reg = power_state;
++
++	printk("after power down?\n");
++}
++
++void ar7_reboot_setup(void)
++{
++	_machine_restart = ar7_machine_restart;
++	_machine_halt = ar7_machine_halt;
++	_machine_power_off = ar7_machine_power_off;
++}
++
++static int __init ar7_do_preserve_adam2(char *s)
++{
++	if (!strcmp(s, "no") || !strcmp(s, "0"))
++		preserve_adam2 = 0;
++	else
++	  	preserve_adam2 = 1;
++        return 1;
++}
++
++__setup("adam2=", ar7_do_preserve_adam2);
+diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c
+--- linux.old/arch/mips/ar7/setup.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/setup.c	2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,143 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/irq.h>
++
++#include <asm/processor.h>
++#include <asm/irq.h>
++#include <asm/irq_cpu.h>
++#include <asm/time.h>
++#include <asm/mipsregs.h>
++#include <asm/mips-boards/prom.h>
++
++#ifdef CONFIG_KGDB
++extern void rs_kgdb_hook(int);
++extern void breakpoint(void);
++int remote_debug = 0;
++#endif
++
++extern void ar7_reboot_setup(void);
++extern void ar7_irq_init(int);
++extern asmlinkage void ar7IRQ(void);
++
++void ar7_time_init(void)
++{
++  /* XXX runtime */
++  mips_hpt_frequency = CONFIG_AR7_CPU * 500000;
++}
++
++void ar7_timer_setup(struct irqaction *irq)
++{
++  setup_irq(7, irq);
++  set_c0_status(IE_IRQ5);
++}
++
++void __init init_IRQ(void)
++{
++  init_generic_irq();
++  mips_cpu_irq_init(0);
++  ar7_irq_init(8);
++
++  /* Now safe to set the exception vector. */
++  set_except_vector(0, ar7IRQ);
++
++#ifdef CONFIG_KGDB
++  if (remote_debug)
++  {
++    set_debug_traps();
++    breakpoint();
++  }
++#endif
++}
++
++const char *get_system_type(void)
++{
++	return "Texas Instruments AR7";
++}
++
++void __init ar7_setup(void)
++{
++#ifdef CONFIG_KGDB
++	int rs_putDebugChar(char);
++	char rs_getDebugChar(void);
++	extern int (*generic_putDebugChar)(char);
++	extern char (*generic_getDebugChar)(void);
++#endif
++	char *argptr;
++#ifdef CONFIG_SERIAL_CONSOLE
++	argptr = prom_getcmdline();
++	if ((argptr = strstr(argptr, "console=")) == NULL) {
++		char console[20];
++		char *s;
++		int i = 0;
++		
++		s = prom_getenv("modetty0");
++		strcpy(console, "38400");
++		
++		if (s != NULL) {
++			while (s[i] >= '0' && s[i] <= '9')
++				i++;
++		
++			if (i > 0) {
++				strncpy(console, s, i);
++				console[i] = 0;
++			}
++		}
++		
++		argptr = prom_getcmdline();
++		strcat(argptr, " console=ttyS0,");
++		strcat(argptr, console);
++	}
++#endif
++
++#ifdef CONFIG_KGDB
++	argptr = prom_getcmdline();
++	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
++		int line;
++		argptr += strlen("kgdb=ttyS");
++		if (*argptr != '0' && *argptr != '1')
++			printk("KGDB: Uknown serial line /dev/ttyS%c, "
++					"falling back to /dev/ttyS1\n", *argptr);
++		line = *argptr == '0' ? 0 : 1;
++		printk("KGDB: Using serial line /dev/ttyS%d for session\n",
++				line ? 1 : 0);
++
++		rs_kgdb_hook(line);
++		generic_putDebugChar = rs_putDebugChar;
++		generic_getDebugChar = rs_getDebugChar;
++
++		prom_printf("KGDB: Using serial line /dev/ttyS%d for session, "
++				"please connect your debugger\n", line ? 1 : 0);
++
++		remote_debug = 1;
++		/* Breakpoints are in init_IRQ() */
++	}
++#endif
++
++	argptr = prom_getcmdline();
++	if ((argptr = strstr(argptr, "nofpu")) != NULL)
++		cpu_data[0].options &= ~MIPS_CPU_FPU;
++
++	ar7_reboot_setup();
++
++	board_time_init = ar7_time_init;
++	board_timer_setup = ar7_timer_setup;
++}
+diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c
+--- linux.old/arch/mips/ar7/tnetd73xx_misc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c	2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,921 @@
++/******************************************************************************
++ * FILE PURPOSE:    TNETD73xx Misc modules API Source
++ ******************************************************************************
++ * FILE NAME:       tnetd73xx_misc.c
++ *
++ * DESCRIPTION:     Clock Control, Reset Control, Power Management, GPIO
++ *                  FSER Modules API
++ *                  As per TNETD73xx specifications
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - Sharath Kumar     PSP TII  
++ * 14 Feb 03 - Anant Gole        PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#include <linux/types.h>
++#include <asm/ar7/tnetd73xx.h>
++#include <asm/ar7/tnetd73xx_misc.h>
++
++/* TNETD73XX Revision */
++u32 tnetd73xx_get_revision(void)
++{
++	/* Read Chip revision register - This register is from GPIO module */
++	return ( (u32) REG32_DATA(TNETD73XX_CVR));
++}
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++
++void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, TNETD73XX_RESET_CTRL_T reset_ctrl)
++{
++	u32 reset_status;
++
++	/* read current reset register */
++	REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status);
++
++	if (reset_ctrl == OUT_OF_RESET)
++	{
++		/* bring module out of reset */
++		reset_status |= (1 << reset_module);
++	}
++	else
++	{
++		/* put module in reset */
++		reset_status &= (~(1 << reset_module));
++	}
++
++	/* write to the reset register */
++	REG32_WRITE(TNETD73XX_RST_CTRL_PRCR, reset_status);
++}
++
++
++TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status (TNETD73XX_RESET_MODULE_T reset_module)
++{
++	u32 reset_status;
++
++	REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status);
++	return ( (reset_status & (1 << reset_module)) ? OUT_OF_RESET : IN_RESET );
++}
++
++void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode)
++{
++	REG32_WRITE(TNETD73XX_RST_CTRL_SWRCR, mode);
++}
++
++#define TNETD73XX_RST_CTRL_RSR_MASK 0x3
++
++TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status()
++{
++	u32 sys_reset_status;
++
++	REG32_READ(TNETD73XX_RST_CTRL_RSR, sys_reset_status);
++
++	return ( (TNETD73XX_SYS_RESET_STATUS_T) (sys_reset_status & TNETD73XX_RST_CTRL_RSR_MASK) );
++}
++
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++#define TNETD73XX_GLOBAL_POWER_DOWN_MASK    0x3FFFFFFF      /* bit 31, 30 masked */
++#define TNETD73XX_GLOBAL_POWER_DOWN_BIT     30              /* shift to bit 30, 31 */
++
++
++void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl)
++{
++	u32 power_status;
++
++	/* read current power down control register */
++	REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++	if (power_ctrl == POWER_CTRL_POWER_DOWN)
++	{
++		/* power down the module */
++		power_status |= (1 << power_module);
++	}
++	else
++	{
++		/* power on the module */
++		power_status &= (~(1 << power_module));
++	}
++
++	/* write to the reset register */
++	REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status);
++}
++
++TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module)
++{
++	u32 power_status;
++
++	/* read current power down control register */
++	REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++	return ( (power_status & (1 << power_module)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP );
++}
++
++void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode)
++{
++	u32 power_status;
++
++	/* read current power down control register */
++	REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++	power_status &= TNETD73XX_GLOBAL_POWER_DOWN_MASK;
++	power_status |= ( power_mode << TNETD73XX_GLOBAL_POWER_DOWN_BIT);
++
++	/* write to power down control register */
++	REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status);
++}
++
++TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode()
++{
++	u32 power_status;
++
++	/* read current power down control register */
++	REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++	power_status &= (~TNETD73XX_GLOBAL_POWER_DOWN_MASK);
++	power_status = ( power_status >> TNETD73XX_GLOBAL_POWER_DOWN_BIT);
++
++	return ( (TNETD73XX_SYS_POWER_MODE_T) power_status );
++}
++
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++#define TNETD73XX_WAKEUP_POLARITY_BIT   16
++
++void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int,
++		TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl,
++		TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity)
++{
++	u32 wakeup_status;
++
++	/* read the wakeup control register */
++	REG32_READ(TNETD73XX_POWER_CTRL_WKCR, wakeup_status);
++
++	/* enable/disable */
++	if (wakeup_ctrl == WAKEUP_ENABLED)
++	{
++		/* enable wakeup */
++		wakeup_status |= wakeup_int;
++	}
++	else
++	{
++		/* disable wakeup */
++		wakeup_status &= (~wakeup_int);
++	}
++
++	/* set polarity */
++	if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
++	{
++		wakeup_status |= (wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT);
++	}
++	else
++	{
++		wakeup_status &= ~(wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT);
++	}
++
++	/* write  the wakeup control register */
++	REG32_WRITE(TNETD73XX_POWER_CTRL_WKCR, wakeup_status);
++}
++
++
++/*****************************************************************************
++ * FSER  Control
++ *****************************************************************************/
++
++void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode)
++{
++	REG32_WRITE(TNETD73XX_FSER_BASE, fser_mode);
++}
++
++/*****************************************************************************
++ * Clock Control
++ *****************************************************************************/
++
++#define MIN(x,y)               ( ((x) <  (y)) ? (x) : (y) )
++#define MAX(x,y)               ( ((x) >  (y)) ? (x) : (y) )
++#define ABS(x)                 ( ((signed)(x) > 0) ? (x) : (-(x)) )
++#define CEIL(x,y)              ( ((x) + (y) / 2) / (y) )
++
++#define CLKC_CLKCR(x)          (TNETD73XX_CLOCK_CTRL_BASE + 0x20 + (0x20 * (x)))
++#define CLKC_CLKPLLCR(x)       (TNETD73XX_CLOCK_CTRL_BASE + 0x30 + (0x20 * (x)))
++
++#define CLKC_PRE_DIVIDER        0x0000001F
++#define CLKC_POST_DIVIDER       0x001F0000
++
++#define CLKC_PLL_STATUS         0x1
++#define CLKC_PLL_FACTOR         0x0000F000
++
++#define BOOTCR_PLL_BYPASS       (1 << 5)
++#define BOOTCR_MIPS_ASYNC_MODE  (1 << 25)
++
++#define MIPS_PLL_SELECT         0x00030000
++#define SYSTEM_PLL_SELECT       0x0000C000
++#define USB_PLL_SELECT          0x000C0000
++#define ADSLSS_PLL_SELECT       0x00C00000
++
++#define MIPS_AFECLKI_SELECT     0x00000000
++#define MIPS_REFCLKI_SELECT     0x00010000
++#define MIPS_XTAL3IN_SELECT     0x00020000
++
++#define SYSTEM_AFECLKI_SELECT   0x00000000
++#define SYSTEM_REFCLKI_SELECT   0x00004000
++#define SYSTEM_XTAL3IN_SELECT   0x00008000
++#define SYSTEM_MIPSPLL_SELECT   0x0000C000
++
++#define USB_SYSPLL_SELECT       0x00000000
++#define USB_REFCLKI_SELECT      0x00040000
++#define USB_XTAL3IN_SELECT      0x00080000
++#define USB_MIPSPLL_SELECT      0x000C0000
++
++#define ADSLSS_AFECLKI_SELECT   0x00000000
++#define ADSLSS_REFCLKI_SELECT   0x00400000
++#define ADSLSS_XTAL3IN_SELECT   0x00800000
++#define ADSLSS_MIPSPLL_SELECT   0x00C00000
++
++#define  SYS_MAX                CLK_MHZ(150)
++#define  SYS_MIN                CLK_MHZ(1)
++
++#define  MIPS_SYNC_MAX          SYS_MAX
++#define  MIPS_ASYNC_MAX         CLK_MHZ(160)
++#define  MIPS_MIN               CLK_MHZ(1)
++
++#define  USB_MAX                CLK_MHZ(100)
++#define  USB_MIN                CLK_MHZ(1)
++
++#define  ADSL_MAX               CLK_MHZ(180)
++#define  ADSL_MIN               CLK_MHZ(1)
++
++#define  PLL_MUL_MAXFACTOR      15
++#define  MAX_DIV_VALUE          32
++#define  MIN_DIV_VALUE          1
++
++#define  MIN_PLL_INP_FREQ       CLK_MHZ(8)
++#define  MAX_PLL_INP_FREQ       CLK_MHZ(100)
++
++#define  DIVIDER_LOCK_TIME      10100
++#define  PLL_LOCK_TIME          10100 * 75
++
++
++
++							      /****************************************************************************
++							       * DATA PURPOSE:    PRIVATE Variables
++							       **************************************************************************/
++							      static u32 *clk_src[4];
++							      static u32 mips_pll_out;
++							      static u32 sys_pll_out;
++							      static u32 afeclk_inp;
++							      static u32 refclk_inp;
++							      static u32 xtal_inp;
++							      static u32 present_min;
++							      static u32 present_max;
++
++							      /* Forward References */
++							      static u32 find_gcd(u32 min, u32 max);
++							      static u32 compute_prediv( u32 divider, u32 min, u32 max);
++							      static void get_val(u32 base_freq, u32 output_freq,u32 *multiplier, u32 *divider);
++							      static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id);
++							      static void find_approx(u32 *,u32 *,u32);
++
++							      /****************************************************************************
++							       * FUNCTION: tnetd73xx_clkc_init
++							       ****************************************************************************
++							       * Description: The routine initializes the internal variables depending on
++							       *              on the sources selected for different clocks.
++							       ***************************************************************************/
++void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in)
++{
++
++	u32 choice;
++
++	afeclk_inp = afeclk;
++	refclk_inp = refclk;
++	xtal_inp = xtal3in;
++
++	choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & MIPS_PLL_SELECT;
++	switch(choice)
++	{
++		case MIPS_AFECLKI_SELECT:
++			clk_src[CLKC_MIPS] = &afeclk_inp;
++			break;
++
++		case MIPS_REFCLKI_SELECT:
++			clk_src[CLKC_MIPS] = &refclk_inp;
++			break;
++
++		case MIPS_XTAL3IN_SELECT:
++			clk_src[CLKC_MIPS] = &xtal_inp;
++			break;
++
++		default :
++			clk_src[CLKC_MIPS] = 0;
++
++	}
++
++	choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & SYSTEM_PLL_SELECT;
++	switch(choice)
++	{
++		case SYSTEM_AFECLKI_SELECT:
++			clk_src[CLKC_SYS] = &afeclk_inp;
++			break;
++
++		case SYSTEM_REFCLKI_SELECT:
++			clk_src[CLKC_SYS] = &refclk_inp;
++			break;
++
++		case SYSTEM_XTAL3IN_SELECT:
++			clk_src[CLKC_SYS] = &xtal_inp;
++			break;
++
++		case SYSTEM_MIPSPLL_SELECT:
++			clk_src[CLKC_SYS] = &mips_pll_out;
++			break;
++
++		default :
++			clk_src[CLKC_SYS] = 0;
++
++	}
++
++
++	choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & ADSLSS_PLL_SELECT;
++	switch(choice)
++	{
++		case ADSLSS_AFECLKI_SELECT:
++			clk_src[CLKC_ADSLSS] = &afeclk_inp;
++			break;
++
++		case ADSLSS_REFCLKI_SELECT:
++			clk_src[CLKC_ADSLSS] = &refclk_inp;
++			break;
++
++		case ADSLSS_XTAL3IN_SELECT:
++			clk_src[CLKC_ADSLSS] = &xtal_inp;
++			break;
++
++		case ADSLSS_MIPSPLL_SELECT:
++			clk_src[CLKC_ADSLSS] = &mips_pll_out;
++			break;
++
++		default :
++			clk_src[CLKC_ADSLSS] = 0;
++
++	}
++
++
++	choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & USB_PLL_SELECT;
++	switch(choice)
++	{
++		case USB_SYSPLL_SELECT:
++			clk_src[CLKC_USB] = &sys_pll_out ;
++			break;
++
++		case USB_REFCLKI_SELECT:
++			clk_src[CLKC_USB] = &refclk_inp;
++			break;
++
++		case USB_XTAL3IN_SELECT:
++			clk_src[CLKC_USB] = &xtal_inp;
++			break;
++
++		case USB_MIPSPLL_SELECT:
++			clk_src[CLKC_USB] = &mips_pll_out;
++			break;
++
++		default :
++			clk_src[CLKC_USB] = 0;
++
++	}
++}
++
++
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_clkc_set_freq
++ ****************************************************************************
++ * Description: The above routine is called to set the output_frequency of the
++ *              selected clock(using clk_id) to the  required value given
++ *              by the variable output_freq.
++ ***************************************************************************/
++TNETD73XX_ERR tnetd73xx_clkc_set_freq
++(
++ TNETD73XX_CLKC_ID_T clk_id,
++ u32              output_freq
++ )
++{
++	u32 base_freq;
++	u32 multiplier;
++	u32 divider;
++	u32 min_prediv;
++	u32 max_prediv;
++	u32 prediv;
++	u32 postdiv;
++	u32 temp;
++
++	/* check if PLLs are bypassed*/
++	if(REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS)
++	{
++		return TNETD73XX_ERR_ERROR;
++	}
++
++	/*check if the requested output_frequency is in valid range*/
++	switch( clk_id )
++	{
++		case CLKC_SYS:
++			if( output_freq < SYS_MIN || output_freq > SYS_MAX)
++			{
++				return TNETD73XX_ERR_ERROR;
++			}
++			present_min = SYS_MIN;
++			present_max = SYS_MAX;
++			break;
++
++		case CLKC_MIPS:
++			if((output_freq < MIPS_MIN) ||
++					(output_freq > ((REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX)))
++			{
++				return TNETD73XX_ERR_ERROR;
++			}
++			present_min = MIPS_MIN;
++			present_max = (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX;
++			break;
++
++		case CLKC_USB:
++			if( output_freq < USB_MIN || output_freq > USB_MAX)
++			{
++				return TNETD73XX_ERR_ERROR;
++			}
++			present_min = USB_MIN;
++			present_max = USB_MAX;
++			break;
++
++		case CLKC_ADSLSS:
++			if( output_freq < ADSL_MIN || output_freq > ADSL_MAX)
++			{
++				return TNETD73XX_ERR_ERROR;
++			}
++			present_min = ADSL_MIN;
++			present_max = ADSL_MAX;
++			break;
++	}
++
++
++	base_freq = get_base_frequency(clk_id);
++
++
++	/* check for minimum base frequency value */
++	if( base_freq < MIN_PLL_INP_FREQ)
++	{
++		return TNETD73XX_ERR_ERROR;
++	}
++
++	get_val(output_freq, base_freq, &multiplier, &divider);
++
++	/* check multiplier range  */
++	if( (multiplier  > PLL_MUL_MAXFACTOR) || (multiplier <= 0) )
++	{
++		return TNETD73XX_ERR_ERROR;
++	}
++
++	/* check divider value */
++	if( divider == 0 )
++	{
++		return TNETD73XX_ERR_ERROR;
++	}
++
++	/*compute minimum and maximum predivider values */
++	min_prediv = MAX(base_freq / MAX_PLL_INP_FREQ + 1, divider / MAX_DIV_VALUE + 1);
++	max_prediv = MIN(base_freq / MIN_PLL_INP_FREQ, MAX_DIV_VALUE);
++
++	/*adjust  the value of divider so that it not less than minimum predivider value*/
++	if (divider < min_prediv)
++	{
++		temp = CEIL(min_prediv, divider);
++		if ((temp * multiplier) > PLL_MUL_MAXFACTOR)
++		{
++			return TNETD73XX_ERR_ERROR  ;
++		}
++		else
++		{
++			multiplier = temp * multiplier;
++			divider = min_prediv;
++		}
++
++	}
++
++	/* compute predivider  and postdivider values */
++	prediv = compute_prediv (divider, min_prediv, max_prediv);
++	postdiv = CEIL(divider,prediv);
++
++	/*return fail if postdivider value falls out of range */
++	if(postdiv > MAX_DIV_VALUE)
++	{
++		return TNETD73XX_ERR_ERROR;
++	}
++
++
++	/*write predivider and postdivider values*/
++	/* pre-Divider and post-divider are 5 bit N+1 dividers */
++	REG32_WRITE(CLKC_CLKCR(clk_id), ((postdiv -1) & 0x1F) << 16 | ((prediv -1) & 0x1F) );
++
++	/*wait for divider output to stabilise*/
++	for(temp =0; temp < DIVIDER_LOCK_TIME; temp++);
++
++	/*write to PLL clock register*/
++
++	if(clk_id == CLKC_SYS)
++	{
++		/* but before writing put DRAM to hold mode */
++		REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) |= 0x80000000;
++	}
++	/*Bring PLL into div mode */
++	REG32_WRITE(CLKC_CLKPLLCR(clk_id), 0x4);
++
++	/*compute the word to be written to PLLCR
++	 *corresponding to multiplier value
++	 */
++	multiplier = (((multiplier - 1) & 0xf) << 12)| ((255 <<3) | 0x0e);
++
++	/* wait till PLL enters div mode */
++	while(REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS)
++		/*nothing*/;
++
++	REG32_WRITE(CLKC_CLKPLLCR(clk_id), multiplier);
++
++	while(!REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS)
++		/*nothing*/;
++
++
++	/*wait for External pll to lock*/
++	for(temp =0; temp < PLL_LOCK_TIME; temp++);
++
++	if(clk_id == CLKC_SYS)
++	{
++		/* Bring DRAM out of hold */
++		REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) &= ~0x80000000;
++	}
++
++	return TNETD73XX_ERR_OK ;
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_clkc_get_freq
++ ****************************************************************************
++ * Description: The above routine is called to get the output_frequency of the
++ *              selected clock( clk_id)
++ ***************************************************************************/
++u32 tnetd73xx_clkc_get_freq
++(
++ TNETD73XX_CLKC_ID_T clk_id
++ )
++{
++
++	u32  clk_ctrl_register;
++	u32  clk_pll_setting;
++	u32  clk_predivider;
++	u32  clk_postdivider;
++	u16  pll_factor;
++	u32  base_freq;
++	u32  divider;
++
++	base_freq = get_base_frequency(clk_id);
++
++	clk_ctrl_register = REG32_DATA(CLKC_CLKCR(clk_id));
++
++	/* pre-Divider and post-divider are 5 bit N+1 dividers */
++	clk_predivider = (CLKC_PRE_DIVIDER & clk_ctrl_register) + 1;
++	clk_postdivider = ((CLKC_POST_DIVIDER & clk_ctrl_register) >> 16) + 1;
++
++	divider =  clk_predivider * clk_postdivider;
++
++
++	if( (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS))
++	{
++		return (CEIL(base_freq, divider));  /* PLLs bypassed.*/
++	}
++
++
++	else
++	{
++		/*  return the current clock speed based upon the PLL setting */
++		clk_pll_setting = REG32_DATA(CLKC_CLKPLLCR(clk_id));
++
++		/* Get the PLL multiplication factor */
++		pll_factor = ((clk_pll_setting & CLKC_PLL_FACTOR) >> 12) + 1;
++
++		/* Check if we're in divide mode or multiply mode */
++		if((clk_pll_setting & 0x1)   == 0)
++		{
++			/* We're in divide mode */
++			if(pll_factor <  0x10)
++				return (CEIL(base_freq >> 1, divider));
++			else
++				return (CEIL(base_freq >> 2, divider));
++		}
++
++		else     /* We're in PLL mode */
++		{
++			/* See if PLLNDIV & PLLDIV are set */
++			if((clk_pll_setting & 0x0800) && (clk_pll_setting & 0x2))
++			{
++				if(clk_pll_setting & 0x1000)
++				{
++					/* clk = base_freq * k/2  */
++					return(CEIL((base_freq * pll_factor) >> 1, divider));
++				}
++				else
++				{
++					/* clk = base_freq * (k-1) / 4)*/
++					return(CEIL((base_freq * (pll_factor - 1)) >>2, divider));
++				}
++			}
++			else
++			{
++				if(pll_factor < 0x10)
++				{
++					/* clk = base_freq * k */
++					return(CEIL(base_freq * pll_factor, divider));
++				}
++
++				else
++				{
++					/* clk = base_freq  */
++					return(CEIL(base_freq, divider));
++				}
++			}
++		}
++		return(0); /* Should never reach here */
++
++	}
++
++}
++
++
++/* local helper functions */
++
++/****************************************************************************
++ * FUNCTION: get_base_frequency
++ ****************************************************************************
++ * Description: The above routine is called to get base frequency of the clocks.
++ ***************************************************************************/
++
++static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id)
++{
++	/* update the current MIPs PLL output value, if the required
++	 * source is MIPS PLL
++	 */
++	if ( clk_src[clk_id] == &mips_pll_out)
++	{
++		*clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_MIPS);
++	}
++
++
++	/* update the current System PLL output value, if the required
++	 * source is system PLL
++	 */
++	if ( clk_src[clk_id] == &sys_pll_out)
++	{
++		*clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_SYS);
++	}
++
++	return (*clk_src[clk_id]);
++
++}
++
++
++
++/****************************************************************************
++ * FUNCTION: find_gcd
++ ****************************************************************************
++ * Description: The above routine is called to find gcd of 2 numbers.
++ ***************************************************************************/
++static u32 find_gcd
++(
++ u32 min,
++ u32 max
++ )
++{
++	if (max % min == 0)
++	{
++		return min;
++	}
++	else
++	{
++		return find_gcd(max % min, min);
++	}
++}
++
++/****************************************************************************
++ * FUNCTION: compute_prediv
++ ****************************************************************************
++ * Description: The above routine is called to compute predivider value
++ ***************************************************************************/
++static u32 compute_prediv(u32 divider, u32 min, u32 max)
++{
++	u16 prediv;
++
++	/* return the divider itself it it falls within the range of predivider*/
++	if (min <= divider && divider <= max)
++	{
++		return divider;
++	}
++
++	/* find a value for prediv such that it is a factor of divider */
++	for (prediv = max; prediv >= min ; prediv--)
++	{
++		if ( (divider % prediv) == 0 )
++		{
++			return prediv;
++		}
++	}
++
++	/* No such factor exists,  return min as prediv */
++	return min;
++}
++
++/****************************************************************************
++ * FUNCTION: get_val
++ ****************************************************************************
++ * Description: This routine is called to get values of divider and multiplier.
++ ***************************************************************************/
++
++static void get_val(u32 output_freq, u32 base_freq,u32 *multiplier, u32 *divider)
++{
++	u32 temp_mul;
++	u32 temp_div;
++	u32 gcd;
++	u32 min_freq;
++	u32 max_freq;
++
++	/* find gcd of base_freq, output_freq */
++	min_freq = (base_freq < output_freq) ? base_freq : output_freq;
++	max_freq = (base_freq > output_freq) ? base_freq : output_freq;
++	gcd = find_gcd(min_freq , max_freq);
++
++	if(gcd == 0)
++		return;  /* ERROR */
++
++	/* compute values of multiplier and divider */
++	temp_mul = output_freq / gcd;
++	temp_div = base_freq / gcd;
++
++
++	/* set multiplier such that 1 <= multiplier <= PLL_MUL_MAXFACTOR */
++	if( temp_mul > PLL_MUL_MAXFACTOR )
++	{
++		if((temp_mul / temp_div) > PLL_MUL_MAXFACTOR)
++			return;
++
++		find_approx(&temp_mul,&temp_div,base_freq);
++	}
++
++	*multiplier = temp_mul;
++	*divider    = temp_div;
++}
++
++/****************************************************************************
++ * FUNCTION: find_approx
++ ****************************************************************************
++ * Description: This function gets the approx value of num/denom.
++ ***************************************************************************/
++
++static void find_approx(u32 *num,u32 *denom,u32 base_freq)
++{
++	u32 num1;
++	u32 denom1;
++	u32 num2;
++	u32 denom2;
++	int32_t closest;
++	int32_t prev_closest;
++	u32 temp_num;
++	u32 temp_denom;
++	u32 normalize;
++	u32 gcd;
++	u32 output_freq;
++
++	num1 = *num;
++	denom1 = *denom;
++
++	prev_closest = 0x7fffffff; /* maximum possible value */
++	num2 = num1;
++	denom2 = denom1;
++
++	/* start with  max */
++	for(temp_num = 15; temp_num >=1; temp_num--)
++	{
++
++		temp_denom = CEIL(temp_num * denom1, num1);
++		output_freq = (temp_num * base_freq) / temp_denom;
++
++		if(temp_denom < 1)
++		{
++			break;
++		}
++		else
++		{
++			normalize = CEIL(num1,temp_num);
++			closest = (ABS((num1 * (temp_denom) ) - (temp_num * denom1)))  * normalize;
++			if(closest < prev_closest && output_freq > present_min && output_freq <present_max)
++			{
++				prev_closest = closest;
++				num2 = temp_num;
++				denom2 = temp_denom;
++			}
++
++		}
++
++	}
++
++	gcd = find_gcd(num2,denom2);
++	num2 = num2 / gcd;
++	denom2 = denom2 /gcd;
++
++	*num      = num2;
++	*denom    = denom2;
++}
++
++
++/*****************************************************************************
++ * GPIO  Control
++ *****************************************************************************/
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_init
++ ***************************************************************************/
++void tnetd73xx_gpio_init()
++{
++	/* Bring module out of reset */
++	tnetd73xx_reset_ctrl(RESET_MODULE_GPIO, OUT_OF_RESET);
++	REG32_WRITE(TNETD73XX_GPIOENR, 0xFFFFFFFF);    
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_ctrl
++ ***************************************************************************/
++void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin, 
++		TNETD73XX_GPIO_PIN_MODE_T pin_mode,
++		TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction)
++{
++	u32 pin_status;
++	REG32_READ(TNETD73XX_GPIOENR, pin_status);
++	if (pin_mode == GPIO_PIN)
++	{
++		pin_status |= (1 << gpio_pin);
++		REG32_WRITE(TNETD73XX_GPIOENR, pin_status);
++
++		/* Set pin direction */
++		REG32_READ(TNETD73XX_GPIOPDIRR, pin_status);
++		if (pin_direction == GPIO_INPUT_PIN)
++		{
++			pin_status |= (1 << gpio_pin);
++		}
++		else /* GPIO_OUTPUT_PIN */
++		{
++			pin_status &= (~(1 << gpio_pin));
++		}
++		REG32_WRITE(TNETD73XX_GPIOPDIRR, pin_status);
++	}
++	else /* FUNCTIONAL PIN */
++	{
++		pin_status &= (~(1 << gpio_pin));
++		REG32_WRITE(TNETD73XX_GPIOENR, pin_status);
++	}
++
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_out
++ ***************************************************************************/
++void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value)
++{
++	u32 pin_value;
++
++	REG32_READ(TNETD73XX_GPIODOUTR, pin_value);
++	if (value == 1)
++	{
++		pin_value |= (1 << gpio_pin);
++	}
++	else
++	{
++		pin_value &= (~(1 << gpio_pin));
++	}
++	REG32_WRITE(TNETD73XX_GPIODOUTR, pin_value);
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_in
++ ***************************************************************************/
++int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin)
++{
++	u32 pin_value;
++	REG32_READ(TNETD73XX_GPIODINR, pin_value);
++	return ( (pin_value & (1 << gpio_pin)) ? 1 : 0 );
++}
++
+diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
+--- linux.old/arch/mips/config-shared.in	2005-10-21 16:43:18.917114000 +0200
++++ linux.dev/arch/mips/config-shared.in	2005-11-10 01:12:43.950955750 +0100
+@@ -20,6 +20,16 @@
+ mainmenu_option next_comment
+ comment 'Machine selection'
+ dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
++dep_bool 'Support for Texas Instruments AR7 (EXPERIMENTAL)' CONFIG_AR7 $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
++if [ "$CONFIG_AR7" = "y" ]; then
++   choice 'Texas Instruments Reference Platform' \
++      "AR7DB CONFIG_AR7DB \
++      AR7RD CONFIG_AR7RD \
++      AR7WRD CONFIG_AR7WRD" AR7DB
++   int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_CPU 150
++   int 'Texas Instruments AR7 System Frequency' CONFIG_AR7_SYS 125
++   hex 'Texas Instruments AR7 SDRAM Start' CONFIG_AR7_MEMORY 0x14000000
++fi
+ dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32
+ dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32
+@@ -239,6 +249,11 @@
+    define_bool CONFIG_NONCOHERENT_IO y
+    define_bool CONFIG_PC_KEYB y
+ fi
++if [ "$CONFIG_AR7" = "y" ]; then
++   define_bool CONFIG_IRQ_CPU y
++   define_bool CONFIG_NONCOHERENT_IO y
++   define_bool CONFIG_SWAP_IO_SPACE y
++fi
+ if [ "$CONFIG_CASIO_E55" = "y" ]; then
+    define_bool CONFIG_IRQ_CPU y
+    define_bool CONFIG_NONCOHERENT_IO y
+@@ -736,6 +751,7 @@
+ mainmenu_option next_comment
+ comment 'General setup'
+ if [ "$CONFIG_ACER_PICA_61" = "y" -o \
++     "$CONFIG_AR7" = "y" -o \
+      "$CONFIG_CASIO_E55" = "y" -o \
+      "$CONFIG_DDB5074" = "y" -o \
+      "$CONFIG_DDB5476" = "y" -o \
+@@ -797,6 +813,7 @@
+ bool 'Networking support' CONFIG_NET
+ 
+ if [ "$CONFIG_ACER_PICA_61" = "y" -o \
++     "$CONFIG_AR7" = "y" -o \
+      "$CONFIG_CASIO_E55" = "y" -o \
+      "$CONFIG_DECSTATION" = "y" -o \
+      "$CONFIG_IBM_WORKPAD" = "y" -o \
+diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
+--- linux.old/arch/mips/kernel/head.S	2005-10-21 16:43:16.396956500 +0200
++++ linux.dev/arch/mips/kernel/head.S	2005-11-10 01:10:45.807572250 +0100
+@@ -75,11 +75,11 @@
+ 		 * size!
+ 		 */
+ 		NESTED(except_vec4, 0, sp)
+-		.set	push
+-		.set	noreorder
+-1:		j	1b			/* Dummy, will be replaced */
+-		 nop
+-		.set	pop
++		.set	mips2
++		lui     k0, 0x9400
++		ori     k0, 0x200
++		jr      k0
++		nop
+ 		END(except_vec4)
+ 
+ 		/*
+diff -urN linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mips_ksyms.c
+--- linux.old/arch/mips/kernel/mips_ksyms.c	2004-02-18 14:36:30.000000000 +0100
++++ linux.dev/arch/mips/kernel/mips_ksyms.c	2005-11-10 01:10:45.811572500 +0100
+@@ -40,6 +40,12 @@
+ extern long __strnlen_user_nocheck_asm(const char *s);
+ extern long __strnlen_user_asm(const char *s);
+ 
++#ifdef CONFIG_AR7
++#include <asm/ar7/adam2_env.h>
++int avalanche_request_pacing(int irq_nr, unsigned int blk_num, unsigned int pace_value);
++#endif
++
++
+ EXPORT_SYMBOL(mips_machtype);
+ #ifdef CONFIG_EISA
+ EXPORT_SYMBOL(EISA_bus);
+@@ -103,3 +109,10 @@
+ #endif
+ 
+ EXPORT_SYMBOL(get_wchan);
++
++#ifdef CONFIG_AR7
++EXPORT_SYMBOL_NOVERS(avalanche_request_pacing);
++EXPORT_SYMBOL_NOVERS(prom_getenv);
++EXPORT_SYMBOL_NOVERS(prom_iterenv);
++#endif
++
+diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
+--- linux.old/arch/mips/kernel/setup.c	2005-10-21 16:43:16.396956500 +0200
++++ linux.dev/arch/mips/kernel/setup.c	2005-11-10 01:14:16.376732000 +0100
+@@ -38,6 +38,7 @@
+ #include <asm/io.h>
+ #include <asm/ptrace.h>
+ #include <asm/system.h>
++#include <asm/addrspace.h>
+ 
+ struct cpuinfo_mips cpu_data[NR_CPUS];
+ EXPORT_SYMBOL(cpu_data);
+@@ -88,7 +89,7 @@
+ struct boot_mem_map boot_mem_map;
+ 
+ unsigned char aux_device_present;
+-extern char _ftext, _etext, _fdata, _edata, _end;
++extern char _ftext, _etext, _fdata, _edata, _fbss, _end;
+ 
+ static char command_line[CL_SIZE];
+        char saved_command_line[CL_SIZE];
+@@ -116,6 +117,7 @@
+ 
+ static struct resource code_resource = { "Kernel code" };
+ static struct resource data_resource = { "Kernel data" };
++static struct resource  bss_resource = { "Kernel bss" };
+ 
+ asmlinkage void __init
+ init_arch(int argc, char **argv, char **envp, int *prom_vec)
+@@ -272,7 +274,7 @@
+ 	for (i = 0; i < boot_mem_map.nr_map; i++) {
+ 		unsigned long start, end;
+ 
+-		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
++		if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
+ 			continue;
+ 
+ 		start = PFN_UP(boot_mem_map.map[i].addr);
+@@ -320,7 +322,8 @@
+ #endif
+ 
+ 	/* Initialize the boot-time allocator with low memory only.  */
+-	bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
++	bootmap_size = init_bootmem_node(NODE_DATA(0), first_usable_pfn,
++					 PFN_UP(PHYS_OFFSET), max_low_pfn);
+ 
+ 	/*
+ 	 * Register fully available low RAM pages with the bootmem allocator.
+@@ -371,11 +374,12 @@
+ 			continue;
+ 
+ 		/* Register lowmem ranges */
+-		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
++		free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
++				  size<<PAGE_SHIFT);
+ 	}
+ 
+ 	/* Reserve the bootmap memory.  */
+-	reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
++	reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_usable_pfn), bootmap_size);
+ 
+ #ifdef CONFIG_BLK_DEV_INITRD
+ 	/* Board specific code should have set up initrd_start and initrd_end */
+@@ -409,6 +413,8 @@
+ 	code_resource.end = virt_to_bus(&_etext) - 1;
+ 	data_resource.start = virt_to_bus(&_fdata);
+ 	data_resource.end = virt_to_bus(&_edata) - 1;
++	bss_resource.start = virt_to_bus(&_fbss);
++	bss_resource.end = virt_to_bus(&_end) - 1;
+ 
+ 	/*
+ 	 * Request address space for all standard RAM.
+@@ -448,6 +454,7 @@
+ 		 */
+ 		request_resource(res, &code_resource);
+ 		request_resource(res, &data_resource);
++		request_resource(res, &bss_resource);
+ 	}
+ }
+ 
+@@ -494,6 +501,7 @@
+ 	void hp_setup(void);
+ 	void au1x00_setup(void);
+ 	void frame_info_init(void);
++ 	void ar7_setup(void);
+ 
+ 	frame_info_init();
+ #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
+@@ -691,6 +699,11 @@
+                 pmc_yosemite_setup();
+                 break;
+ #endif
++#ifdef CONFIG_AR7
++	case MACH_GROUP_UNKNOWN:
++		ar7_setup();
++		break;
++#endif
+ 	default:
+ 		panic("Unsupported architecture");
+ 	}
+diff -urN linux.old/arch/mips/kernel/time.c linux.dev/arch/mips/kernel/time.c
+--- linux.old/arch/mips/kernel/time.c	2005-01-19 15:09:29.000000000 +0100
++++ linux.dev/arch/mips/kernel/time.c	2005-11-10 01:12:43.950955750 +0100
+@@ -143,7 +143,6 @@
+ 	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
+ 	write_c0_count(expirelo - cycles_per_jiffy);
+ 	write_c0_compare(expirelo);
+-	write_c0_count(count);
+ }
+ 
+ int (*mips_timer_state)(void);
+diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
+--- linux.old/arch/mips/kernel/traps.c	2005-10-21 16:43:16.400956750 +0200
++++ linux.dev/arch/mips/kernel/traps.c	2005-11-10 01:13:28.301727500 +0100
+@@ -869,9 +869,24 @@
+ 
+ 	exception_handlers[n] = handler;
+ 	if (n == 0 && cpu_has_divec) {
++	  printk(KERN_DEBUG "%s: using long jump via k0 to reach %08x\n",
++		 __FUNCTION__, handler);
++	  /* where does the 8 byte limit mentioned in head.S come from??? */
++	  if (handler > 0x0fffffff) { /* maximum for single J instruction */
++	    /* lui k0, 0x0000 */
++	    *(volatile u32 *)(KSEG0+0x200) = 0x3c1a0000 | (handler >> 16);
++	    /* ori k0, 0x0000 */
++	    *(volatile u32 *)(KSEG0+0x204) = 0x375a0000 | (handler & 0xffff);
++	    /* jr k0 */
++	    *(volatile u32 *)(KSEG0+0x208) = 0x03400008;
++	    /* nop */
++	    *(volatile u32 *)(KSEG0+0x20C) = 0x00000000;
++    	    flush_icache_range(KSEG0+0x200, KSEG0+0x210);
++	  } else {
+ 		*(volatile u32 *)(KSEG0+0x200) = 0x08000000 |
+ 		                                 (0x03ffffff & (handler >> 2));
+-		flush_icache_range(KSEG0+0x200, KSEG0 + 0x204);
++		flush_icache_range(KSEG0+0x200, KSEG0+0x204);
++	  }
+ 	}
+ 	return (void *)old_handler;
+ }
+diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c
+--- linux.old/arch/mips/mm/init.c	2004-02-18 14:36:30.000000000 +0100
++++ linux.dev/arch/mips/mm/init.c	2005-11-10 01:14:16.376732000 +0100
+@@ -235,10 +235,13 @@
+ #endif
+ }
+ 
++#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
++#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
++
+ void __init paging_init(void)
+ {
+ 	unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+-	unsigned long max_dma, high, low;
++	unsigned long max_dma, high, low, start;
+ 
+ 	pagetable_init();
+ 
+@@ -247,7 +250,8 @@
+ #endif
+ 
+ 	max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+-	low = max_low_pfn;
++	start = START_PFN;
++	low = MAX_LOW_PFN - start;
+ 	high = highend_pfn;
+ 
+ #ifdef CONFIG_ISA
+@@ -270,7 +274,8 @@
+ 		zones_size[ZONE_HIGHMEM] = high - low;
+ #endif
+ 
+-	free_area_init(zones_size);
++	free_area_init_node(0, NODE_DATA(0), 0, zones_size,
++			    start << PAGE_SHIFT, 0);
+ }
+ 
+ #define PFN_UP(x)	(((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
+@@ -283,7 +288,7 @@
+ 	for (i = 0; i < boot_mem_map.nr_map; i++) {
+ 		unsigned long addr, end;
+ 
+-		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
++		if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
+ 			/* not usable memory */
+ 			continue;
+ 
+@@ -313,16 +318,17 @@
+ 	max_mapnr = num_physpages = highend_pfn;
+ 	num_mappedpages = max_low_pfn;
+ #else
+-	max_mapnr = num_mappedpages = num_physpages = max_low_pfn;
++	max_mapnr = num_mappedpages = num_physpages = MAX_LOW_PFN - START_PFN;
+ #endif
+-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
+-
+-	totalram_pages += free_all_bootmem();
++	
++	high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
++	
++	totalram_pages += free_all_bootmem_node(NODE_DATA(0));
+ 	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages.  */
+ 
+ 	reservedpages = ram = 0;
+-	for (tmp = 0; tmp < max_low_pfn; tmp++)
+-		if (page_is_ram(tmp)) {
++	for (tmp = 0; tmp < max_mapnr; tmp++)
++		if (page_is_ram(START_PFN + tmp)) {
+ 			ram++;
+ 			if (PageReserved(mem_map+tmp))
+ 				reservedpages++;
+@@ -377,13 +383,13 @@
+ #endif
+ 
+ extern char __init_begin, __init_end;
+-extern void prom_free_prom_memory(void) __init;
++extern unsigned long prom_free_prom_memory(void) __init;
+ 
+ void free_initmem(void)
+ {
+ 	unsigned long addr;
+ 
+-	prom_free_prom_memory ();
++	totalram_pages += prom_free_prom_memory ();
+ 
+ 	addr = (unsigned long) &__init_begin;
+ 	while (addr < (unsigned long) &__init_end) {
+diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in
+--- linux.old/drivers/char/Config.in	2005-10-21 16:43:16.440959250 +0200
++++ linux.dev/drivers/char/Config.in	2005-11-10 01:10:45.843574500 +0100
+@@ -188,6 +188,14 @@
+    tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
+ fi
+ 
++if [ "$CONFIG_AR7" = "y" ]; then  
++   bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
++   dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
++                   
++   define_int CONFIG_AR7_VLYNQ_PORTS 2 
++   tristate 'ADAM2 environment support (read-only)' CONFIG_AR7_ADAM2
++fi                                                                                             
++
+ source drivers/i2c/Config.in
+ 
+ mainmenu_option next_comment
+diff -urN linux.old/drivers/char/Config.in.orig linux.dev/drivers/char/Config.in.orig
+--- linux.old/drivers/char/Config.in.orig	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/Config.in.orig	2005-11-10 01:10:45.863575750 +0100
+@@ -0,0 +1,414 @@
++#
++# Character device configuration
++#
++mainmenu_option next_comment
++comment 'Character devices'
++
++bool 'Virtual terminal' CONFIG_VT
++if [ "$CONFIG_VT" = "y" ]; then
++   bool '  Support for console on virtual terminal' CONFIG_VT_CONSOLE
++   if [ "$CONFIG_GSC_LASI" = "y" ]; then
++      bool '    Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2
++   fi
++fi
++tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL
++if [ "$CONFIG_SERIAL" = "y" ]; then
++   bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE
++   if [ "$CONFIG_GSC_LASI" = "y" ]; then
++      bool '   serial port on GSC support' CONFIG_SERIAL_GSC
++   fi
++   if [ "$CONFIG_IA64" = "y" ]; then
++      bool '  Support for serial port described by EFI HCDP table' CONFIG_SERIAL_HCDP
++   fi
++   if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
++      tristate '   Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL
++      tristate '   Dual serial port support' CONFIG_DUALSP_SERIAL
++   fi
++fi
++dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL
++if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
++   bool '  Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
++   bool '  Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
++   bool '  Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ
++   bool '  Support special multiport boards' CONFIG_SERIAL_MULTIPORT
++   bool '  Support the Bell Technologies HUB6 card' CONFIG_HUB6
++fi
++bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
++if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
++   tristate '  Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
++   tristate '  Comtrol Rocketport support' CONFIG_ROCKETPORT
++   tristate '  Cyclades async mux support' CONFIG_CYCLADES
++   if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
++      bool '    Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
++   fi
++   if [ "$CONFIG_X86_64" != "y" ]; then
++      tristate '  Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
++      if [ "$CONFIG_DIGIEPCA" = "n" ]; then
++         tristate '  Digiboard PC/Xx Support' CONFIG_DIGI
++      fi
++   fi
++   dep_tristate '  Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA
++   tristate '  Moxa Intellio support' CONFIG_MOXA_INTELLIO
++   tristate '  Moxa SmartIO support' CONFIG_MOXA_SMARTIO
++   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
++      dep_tristate '  Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
++   fi
++   tristate '  Microgate SyncLink card support' CONFIG_SYNCLINK
++   tristate '  SyncLink Multiport support' CONFIG_SYNCLINKMP
++   tristate '  HDLC line discipline support' CONFIG_N_HDLC
++   tristate '  SDL RISCom/8 card support' CONFIG_RISCOM8
++   if [ "$CONFIG_X86_64" != "y" ]; then
++      tristate '  Specialix IO8+ card support' CONFIG_SPECIALIX
++      if [ "$CONFIG_SPECIALIX" != "n" ]; then
++         bool '  Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
++      fi 
++      tristate '  Specialix SX (and SI) card support' CONFIG_SX
++      tristate '  Specialix RIO system support' CONFIG_RIO
++      if [ "$CONFIG_RIO" != "n" ]; then
++        bool '    Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI
++      fi
++   fi
++   bool '  Stallion multiport serial support' CONFIG_STALDRV
++   if [ "$CONFIG_STALDRV" = "y" ]; then
++     tristate '    Stallion EasyIO or EC8/32 support' CONFIG_STALLION
++     tristate '    Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
++   fi
++   if [ "$CONFIG_PARISC" = "y" ]; then
++     if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then
++       bool '  Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD
++     fi
++     if [ "$CONFIG_SERIAL_MUX" != "y" ]; then
++       bool '  PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD
++     fi
++   fi
++   if [ "$CONFIG_MIPS" = "y" ]; then
++      bool '  TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
++      dep_bool '     Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
++      bool '  TMPTX39XX/49XX serial port support' CONFIG_SERIAL_TXX9
++      dep_bool '     Console on TMPTX39XX/49XX serial port' CONFIG_SERIAL_TXX9_CONSOLE $CONFIG_SERIAL_TXX9
++      if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
++	 bool '  Enable Au1x00 UART Support' CONFIG_AU1X00_UART
++	 if [ "$CONFIG_AU1X00_UART" = "y" ]; then
++	    bool '        Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE
++         fi
++         dep_tristate '  Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_SOC_AU1X00
++	    if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then
++	       dep_tristate '  Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_SOC_AU1X00
++	    fi
++	    if [ "$CONFIG_AU1X00_USB_TTY" != "n" -o \
++	         "$CONFIG_AU1X00_USB_RAW" != "n" ]; then
++		 define_bool CONFIG_AU1X00_USB_DEVICE y
++	    fi
++      fi
++      bool '  TXx927 SIO support' CONFIG_TXX927_SERIAL 
++      if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then
++         bool '    TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE  
++      fi                             
++      if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
++         bool '  Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART
++         if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then
++            bool '    Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE
++            if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then
++               define_bool CONFIG_SERIAL_CONSOLE y
++            fi
++         fi
++      fi
++   fi
++   if [ "$CONFIG_DECSTATION" = "y" ]; then
++      bool '  DECstation serial support' CONFIG_SERIAL_DEC
++      dep_bool '    Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC
++      dep_bool '    DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32
++      dep_bool '    Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC
++   fi
++   if [ "$CONFIG_SGI_IP22" = "y" ]; then
++      bool '  SGI Zilog85C30 serial support' CONFIG_IP22_SERIAL
++   fi
++   if [ "$CONFIG_IA64" = "y" ]; then
++      bool '  SGI SN2 l1 serial port support' CONFIG_SGI_L1_SERIAL
++      if [ "$CONFIG_SGI_L1_SERIAL" = "y" ]; then
++	 bool '    SGI SN2 l1 Console support' CONFIG_SGI_L1_SERIAL_CONSOLE
++      fi
++      if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then
++	 bool '  SGI SN2 IOC4 serial port support' CONFIG_SGI_IOC4_SERIAL
++      fi
++   fi
++fi
++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then
++   tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
++fi
++if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
++   bool 'DC21285 serial port support' CONFIG_SERIAL_21285
++   if [ "$CONFIG_SERIAL_21285" = "y" ]; then
++      if [ "$CONFIG_OBSOLETE" = "y" ]; then
++         bool '  Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD
++      fi
++      bool '  Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE
++   fi
++   if [ "$CONFIG_PARISC" = "y" ]; then
++     bool '  PDC software console support' CONFIG_PDC_CONSOLE
++   fi
++fi
++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
++   bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
++   if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
++     define_bool CONFIG_IT8172_CIR y
++   else
++     bool '    Enable PS2 Keyboard Support' CONFIG_PC_KEYB
++   fi
++   bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
++   bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1
++fi
++if [ "$CONFIG_MIPS_IVR" = "y" ]; then
++   bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
++   if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
++     define_bool CONFIG_IT8172_CIR y
++   fi
++   bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
++fi
++if [ "$CONFIG_CPU_VR41XX" = "y" ]; then
++   bool 'NEC VR4100 series Keyboard Interface Unit Support ' CONFIG_VR41XX_KIU
++fi
++bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
++if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
++   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
++fi
++if [ "$CONFIG_PARPORT" != "n" ]; then
++   dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
++   if [ "$CONFIG_PRINTER" != "n" ]; then
++      bool '  Support for console on line printer' CONFIG_LP_CONSOLE
++   fi
++   dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
++   dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT
++fi
++
++if [ "$CONFIG_PPC64" = "y" ] ; then 
++   bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE
++fi
++if [ "$CONFIG_ALL_PPC" = "y" ]; then
++   tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
++fi
++
++if [ "$CONFIG_AR7" = "y" ]; then  
++   bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
++   dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
++                   
++   define_int CONFIG_AR7_VLYNQ_PORTS 2 
++fi                                                                                             
++
++source drivers/i2c/Config.in
++
++mainmenu_option next_comment
++comment 'Mice'
++tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
++if [ "$CONFIG_BUSMOUSE" != "n" ]; then
++   dep_tristate '  ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
++   dep_tristate '  Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
++   dep_tristate '  Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
++   if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then
++      dep_tristate '  Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
++   fi
++#   if [ "$CONFIG_DECSTATION" = "y" ]; then
++#      dep_bool '  MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS
++#   fi
++fi
++
++tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
++if [ "$CONFIG_MOUSE" != "n" ]; then
++   bool '  PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
++   tristate '  C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
++   tristate '  PC110 digitizer pad support' CONFIG_PC110_PAD
++   tristate '  MK712 touch screen support' CONFIG_MK712_MOUSE
++fi
++endmenu
++
++source drivers/char/joystick/Config.in
++
++tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
++if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
++   bool '  Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
++   if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
++      comment '  Edit configuration parameters in ./include/linux/tpqic02.h!'
++   else
++      comment '  Setting runtime QIC-02 configuration is done with qic02conf'
++      comment '  from the tpqic02-support package.  It is available at'
++      comment '  metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
++   fi
++fi
++
++tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER
++dep_mbool '  Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER
++dep_tristate '  Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER
++dep_tristate '  IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER
++dep_tristate '  IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER
++
++mainmenu_option next_comment
++comment 'Watchdog Cards'
++bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
++if [ "$CONFIG_WATCHDOG" != "n" ]; then
++   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
++   tristate '  Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
++   tristate '  Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
++   tristate '  ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
++   tristate '  ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT
++   tristate '  AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT
++   tristate '  Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
++   if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
++      tristate '  DC21285 watchdog' CONFIG_21285_WATCHDOG
++      if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
++         tristate '  NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG
++      fi
++   fi
++   tristate '  Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
++   tristate '  IB700 SBC Watchdog Timer' CONFIG_IB700_WDT
++   tristate '  ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT
++   tristate '  Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO
++   tristate '  Mixcom Watchdog' CONFIG_MIXCOMWD 
++   tristate '  SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
++   dep_tristate '  SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
++   tristate '  NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
++   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
++   tristate '  W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
++   tristate '  WDT Watchdog timer' CONFIG_WDT
++   tristate '  WDT PCI Watchdog timer' CONFIG_WDTPCI
++   if [ "$CONFIG_WDT" != "n" ]; then
++      bool '    WDT501 features' CONFIG_WDT_501
++      if [ "$CONFIG_WDT_501" = "y" ]; then
++         bool '      Fan Tachometer' CONFIG_WDT_501_FAN
++      fi
++   fi
++   tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
++   if [ "$CONFIG_SGI_IP22" = "y" ]; then
++      dep_tristate '  Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
++   fi
++   if [ "$CONFIG_8xx" = "y" ]; then
++      tristate '  MPC8xx Watchdog Timer' CONFIG_8xx_WDT
++   fi
++fi
++endmenu
++
++if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
++   tristate 'NetWinder thermometer support' CONFIG_DS1620
++   tristate 'NetWinder Button' CONFIG_NWBUTTON
++   if [ "$CONFIG_NWBUTTON" != "n" ]; then
++      bool '  Reboot Using Button' CONFIG_NWBUTTON_REBOOT
++   fi
++   tristate 'NetWinder flash support' CONFIG_NWFLASH
++fi
++tristate 'NatSemi SCx200 Support' CONFIG_SCx200
++dep_tristate '  NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200
++
++if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then
++   bool 'SGI SN2 fetchop support' CONFIG_FETCHOP
++fi
++
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then
++   dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI
++fi
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
++   dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI
++fi
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \
++     "$CONFIG_X86_64" = "y" ]; then
++   dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI
++fi
++dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI
++tristate '/dev/nvram support' CONFIG_NVRAM
++tristate 'Enhanced Real Time Clock Support' CONFIG_RTC
++if [ "$CONFIG_IA64" = "y" ]; then
++   bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC
++fi
++if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
++   bool 'Tadpole ANA H8 Support (OBSOLETE)'  CONFIG_H8
++fi
++if [ "$CONFIG_SGI_IP22" = "y" ]; then
++   tristate 'Dallas DS1286 RTC support' CONFIG_DS1286
++fi
++if [ "$CONFIG_SGI_IP27" = "y" ]; then
++   tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
++fi
++if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
++   tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
++fi
++
++tristate 'Double Talk PC internal speech card support' CONFIG_DTLK
++tristate 'Siemens R3964 line discipline' CONFIG_R3964
++tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM
++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then
++   dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI
++fi
++
++mainmenu_option next_comment
++comment 'Ftape, the floppy tape device driver'
++tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
++if [ "$CONFIG_FTAPE" != "n" ]; then
++   source drivers/char/ftape/Config.in
++fi
++
++endmenu
++
++if [ "$CONFIG_GART_IOMMU" = "y" ]; then
++	bool '/dev/agpgart (AGP Support)' CONFIG_AGP
++	define_bool CONFIG_AGP_AMD_K8 y
++else
++	tristate '/dev/agpgart (AGP Support)' CONFIG_AGP
++fi      
++if [ "$CONFIG_AGP" != "n" ]; then
++   bool '  Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL
++   bool '  Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810
++   bool '  VIA chipset support' CONFIG_AGP_VIA
++   bool '  AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD
++   if [ "$CONFIG_GART_IOMMU" != "y" ]; then
++      bool '  AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8
++   fi   
++   bool '  Generic SiS support' CONFIG_AGP_SIS
++   bool '  ALI chipset support' CONFIG_AGP_ALI
++   bool '  Serverworks LE/HE support' CONFIG_AGP_SWORKS
++   if [ "$CONFIG_X86" = "y" ]; then
++      bool '  NVIDIA chipset support' CONFIG_AGP_NVIDIA
++   fi
++   if [ "$CONFIG_IA64" = "y" ]; then
++      bool '  Intel 460GX support' CONFIG_AGP_I460
++      bool '  HP ZX1 AGP support' CONFIG_AGP_HP_ZX1
++   fi
++   bool '  ATI IGP chipset support' CONFIG_AGP_ATI
++fi
++
++mainmenu_option next_comment
++comment 'Direct Rendering Manager (XFree86 DRI support)'
++bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM
++if [ "$CONFIG_DRM" = "y" ]; then
++   bool '  Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD
++   if [ "$CONFIG_DRM_OLD" = "y" ]; then
++      comment 'DRM 4.0 drivers'
++      source drivers/char/drm-4.0/Config.in
++   else
++      comment 'DRM 4.1 drivers'
++      define_bool CONFIG_DRM_NEW y
++      source drivers/char/drm/Config.in
++   fi
++fi
++
++if [ "$CONFIG_X86" = "y" ]; then
++   tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
++fi
++
++endmenu
++
++if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
++   source drivers/char/pcmcia/Config.in
++fi
++if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
++   tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
++   tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
++   #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI
++fi
++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
++  tristate ' ITE GPIO' CONFIG_ITE_GPIO
++fi
++
++if [ "$CONFIG_X86" = "y" ]; then
++   tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
++   dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV
++fi
++
++endmenu
+diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile
+--- linux.old/drivers/char/Makefile	2005-10-21 16:43:16.460960500 +0200
++++ linux.dev/drivers/char/Makefile	2005-11-10 01:10:45.871576250 +0100
+@@ -240,6 +240,13 @@
+ obj-y += joystick/js.o
+ endif
+ 
++#
++# Texas Intruments VLYNQ driver
++# 
++
++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o                                                        
++
+ obj-$(CONFIG_FETCHOP) += fetchop.o
+ obj-$(CONFIG_BUSMOUSE) += busmouse.o
+ obj-$(CONFIG_DTLK) += dtlk.o
+@@ -340,6 +347,11 @@
+   obj-y += ipmi/ipmi.o
+ endif
+ 
++subdir-$(CONFIG_AR7_ADAM2) += ticfg
++ifeq ($(CONFIG_AR7_ADAM2),y)
++  obj-y += ticfg/ticfg.o
++endif
++
+ include $(TOPDIR)/Rules.make
+ 
+ fastdep:
+diff -urN linux.old/drivers/char/Makefile.orig linux.dev/drivers/char/Makefile.orig
+--- linux.old/drivers/char/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/Makefile.orig	2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,374 @@
++#
++# Makefile for the kernel character device drivers.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++# Note 2! The CFLAGS definitions are now inherited from the
++# parent makes..
++#
++
++#
++# This file contains the font map for the default (hardware) font
++#
++FONTMAPFILE = cp437.uni
++
++O_TARGET := char.o
++
++obj-y	 += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
++
++# All of the (potential) objects that export symbols.
++# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
++
++export-objs     :=	busmouse.o console.o keyboard.o sysrq.o \
++			misc.o pty.o random.o selection.o serial.o \
++			sonypi.o tty_io.o tty_ioctl.o generic_serial.o \
++			au1000_gpio.o vac-serial.o hp_psaux.o nvram.o \
++			scx200.o fetchop.o
++
++mod-subdirs	:=	joystick ftape drm drm-4.0 pcmcia
++
++list-multi	:=	
++
++KEYMAP   =defkeymap.o
++KEYBD    =pc_keyb.o
++CONSOLE  =console.o
++SERIAL   =serial.o
++
++ifeq ($(ARCH),s390)
++  KEYMAP   =
++  KEYBD    =
++  CONSOLE  =
++  SERIAL   =
++endif
++
++ifeq ($(ARCH),mips)
++  ifneq ($(CONFIG_PC_KEYB),y)
++    KEYBD    =
++  endif
++  ifeq ($(CONFIG_VR41XX_KIU),y)
++    ifeq ($(CONFIG_IBM_WORKPAD),y)
++      KEYMAP = ibm_workpad_keymap.o
++    endif
++    ifeq ($(CONFIG_VICTOR_MPC30X),y)
++      KEYMAP = victor_mpc30x_keymap.o
++    endif
++    KEYBD    = vr41xx_keyb.o
++  endif
++endif
++
++ifeq ($(ARCH),s390x)
++  KEYMAP   =
++  KEYBD    =
++  CONSOLE  =
++  SERIAL   =
++endif
++
++ifeq ($(ARCH),m68k)
++   ifdef CONFIG_AMIGA
++      KEYBD = amikeyb.o
++   else
++      ifndef CONFIG_MAC
++	 KEYBD =
++      endif
++   endif
++   SERIAL   =
++endif
++
++ifeq ($(ARCH),parisc)
++   ifdef CONFIG_GSC_PS2
++      KEYBD   = hp_psaux.o hp_keyb.o
++   else
++      KEYBD   =
++   endif
++   ifdef CONFIG_SERIAL_MUX
++      CONSOLE += mux.o
++   endif
++   ifdef CONFIG_PDC_CONSOLE
++      CONSOLE += pdc_console.o
++   endif
++endif
++
++ifdef CONFIG_Q40
++  KEYBD += q40_keyb.o
++  SERIAL = serial.o
++endif
++
++ifdef CONFIG_APOLLO
++  KEYBD += dn_keyb.o
++endif
++
++ifeq ($(ARCH),parisc)
++   ifdef CONFIG_GSC_PS2
++      KEYBD   = hp_psaux.o hp_keyb.o
++   else
++      KEYBD   =
++   endif
++   ifdef CONFIG_PDC_CONSOLE
++      CONSOLE += pdc_console.o
++   endif
++endif
++
++ifeq ($(ARCH),arm)
++  ifneq ($(CONFIG_PC_KEYMAP),y)
++    KEYMAP   =
++  endif
++  ifneq ($(CONFIG_PC_KEYB),y)
++    KEYBD    =
++  endif
++endif
++
++ifeq ($(ARCH),sh)
++  KEYMAP   =
++  KEYBD    =
++  CONSOLE  =
++  ifeq ($(CONFIG_SH_HP600),y)
++  KEYMAP   = defkeymap.o
++  KEYBD    = scan_keyb.o hp600_keyb.o
++  CONSOLE  = console.o
++  endif
++  ifeq ($(CONFIG_SH_DMIDA),y)
++  # DMIDA does not connect the HD64465 PS/2 keyboard port
++  # but we allow for USB keyboards to be plugged in.
++  KEYMAP   = defkeymap.o
++  KEYBD    = # hd64465_keyb.o pc_keyb.o
++  CONSOLE  = console.o
++  endif
++  ifeq ($(CONFIG_SH_EC3104),y)
++  KEYMAP   = defkeymap.o
++  KEYBD    = ec3104_keyb.o
++  CONSOLE  = console.o
++  endif
++  ifeq ($(CONFIG_SH_DREAMCAST),y)
++  KEYMAP   = defkeymap.o
++  KEYBD    =
++  CONSOLE  = console.o
++  endif
++endif
++
++ifeq ($(CONFIG_DECSTATION),y)
++  KEYMAP   =
++  KEYBD    =
++endif
++
++ifeq ($(CONFIG_BAGET_MIPS),y)
++  KEYBD    =
++  SERIAL   = vac-serial.o
++endif
++
++ifeq ($(CONFIG_NINO),y)
++  SERIAL   =
++endif
++
++ifneq ($(CONFIG_SUN_SERIAL),)
++  SERIAL   =
++endif
++
++ifeq ($(CONFIG_QTRONIX_KEYBOARD),y)
++  KEYBD    = qtronix.o
++  KEYMAP   = qtronixmap.o
++endif
++
++ifeq ($(CONFIG_DUMMY_KEYB),y)
++  KEYBD = dummy_keyb.o
++endif
++
++obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o
++obj-$(CONFIG_SERIAL) += $(SERIAL)
++obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o
++obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o
++obj-$(CONFIG_SERIAL_21285) += serial_21285.o
++obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o
++obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o
++obj-$(CONFIG_TS_AU1X00_ADS7846) += au1000_ts.o
++obj-$(CONFIG_SERIAL_DEC) += decserial.o
++
++ifndef CONFIG_SUN_KEYBOARD
++  obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD)
++else
++  obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP)
++endif
++
++obj-$(CONFIG_HIL) += hp_keyb.o
++obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
++obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
++obj-$(CONFIG_ROCKETPORT) += rocket.o
++obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
++obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
++obj-$(CONFIG_DIGI) += pcxx.o
++obj-$(CONFIG_DIGIEPCA) += epca.o
++obj-$(CONFIG_CYCLADES) += cyclades.o
++obj-$(CONFIG_STALLION) += stallion.o
++obj-$(CONFIG_ISTALLION) += istallion.o
++obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
++obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
++obj-$(CONFIG_RISCOM8) += riscom8.o
++obj-$(CONFIG_ISI) += isicom.o
++obj-$(CONFIG_ESPSERIAL) += esp.o
++obj-$(CONFIG_SYNCLINK) += synclink.o
++obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
++obj-$(CONFIG_N_HDLC) += n_hdlc.o
++obj-$(CONFIG_SPECIALIX) += specialix.o
++obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
++obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
++obj-$(CONFIG_SX) += sx.o generic_serial.o
++obj-$(CONFIG_RIO) += rio/rio.o generic_serial.o
++obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o
++obj-$(CONFIG_SERIAL167) += serial167.o
++obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o
++obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
++obj-$(CONFIG_TXX927_SERIAL) += serial_txx927.o
++obj-$(CONFIG_SERIAL_TXX9) += generic_serial.o serial_txx9.o
++obj-$(CONFIG_IP22_SERIAL) += sgiserial.o
++obj-$(CONFIG_AU1X00_UART) += au1x00-serial.o
++obj-$(CONFIG_SGI_L1_SERIAL) += sn_serial.o
++
++subdir-$(CONFIG_RIO) += rio
++subdir-$(CONFIG_INPUT) += joystick
++
++obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o
++obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o
++obj-$(CONFIG_PRINTER) += lp.o
++obj-$(CONFIG_TIPAR) += tipar.o
++obj-$(CONFIG_OBMOUSE) += obmouse.o
++
++ifeq ($(CONFIG_INPUT),y)
++obj-y += joystick/js.o
++endif
++
++#
++# Texas Intruments VLYNQ driver
++# 
++
++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o                                                        
++
++obj-$(CONFIG_FETCHOP) += fetchop.o
++obj-$(CONFIG_BUSMOUSE) += busmouse.o
++obj-$(CONFIG_DTLK) += dtlk.o
++obj-$(CONFIG_R3964) += n_r3964.o
++obj-$(CONFIG_APPLICOM) += applicom.o
++obj-$(CONFIG_SONYPI) += sonypi.o
++obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
++obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
++obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
++obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
++obj-$(CONFIG_ADBMOUSE) += adbmouse.o
++obj-$(CONFIG_PC110_PAD) += pc110pad.o
++obj-$(CONFIG_MK712_MOUSE) += mk712.o
++obj-$(CONFIG_RTC) += rtc.o
++obj-$(CONFIG_GEN_RTC) += genrtc.o
++obj-$(CONFIG_EFI_RTC) += efirtc.o
++obj-$(CONFIG_MIPS_RTC) += mips_rtc.o
++obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
++ifeq ($(CONFIG_PPC),)
++  obj-$(CONFIG_NVRAM) += nvram.o
++endif
++obj-$(CONFIG_TOSHIBA) += toshiba.o
++obj-$(CONFIG_I8K) += i8k.o
++obj-$(CONFIG_DS1286) += ds1286.o
++obj-$(CONFIG_DS1620) += ds1620.o
++obj-$(CONFIG_DS1742) += ds1742.o
++obj-$(CONFIG_INTEL_RNG) += i810_rng.o
++obj-$(CONFIG_AMD_RNG) += amd768_rng.o
++obj-$(CONFIG_HW_RANDOM) += hw_random.o
++obj-$(CONFIG_AMD_PM768) += amd76x_pm.o
++obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
++
++obj-$(CONFIG_ITE_GPIO) += ite_gpio.o
++obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o
++obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o
++obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o
++obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o
++obj-$(CONFIG_COBALT_LCD) += lcd.o
++
++obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
++
++subdir-$(CONFIG_FTAPE) += ftape
++subdir-$(CONFIG_DRM_OLD) += drm-4.0
++subdir-$(CONFIG_DRM_NEW) += drm
++subdir-$(CONFIG_PCMCIA) += pcmcia
++subdir-$(CONFIG_AGP) += agp
++
++ifeq ($(CONFIG_FTAPE),y)
++obj-y       += ftape/ftape.o
++endif
++
++obj-$(CONFIG_H8) += h8.o
++obj-$(CONFIG_PPDEV) += ppdev.o
++obj-$(CONFIG_DZ) += dz.o
++obj-$(CONFIG_NWBUTTON) += nwbutton.o
++obj-$(CONFIG_NWFLASH) += nwflash.o
++obj-$(CONFIG_SCx200) += scx200.o
++obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
++
++# Only one watchdog can succeed. We probe the hardware watchdog
++# drivers first, then the softdog driver.  This means if your hardware
++# watchdog dies or is 'borrowed' for some reason the software watchdog
++# still gives you some cover.
++
++obj-$(CONFIG_PCWATCHDOG) += pcwd.o
++obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
++obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
++obj-$(CONFIG_IB700_WDT) += ib700wdt.o
++obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
++obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
++obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
++obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
++obj-$(CONFIG_WDT) += wdt.o
++obj-$(CONFIG_WDTPCI) += wdt_pci.o
++obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
++obj-$(CONFIG_977_WATCHDOG) += wdt977.o
++obj-$(CONFIG_I810_TCO) += i810-tco.o
++obj-$(CONFIG_MACHZ_WDT) += machzwd.o
++obj-$(CONFIG_SH_WDT) += shwdt.o
++obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
++obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
++obj-$(CONFIG_ALIM1535_WDT) += alim1535d_wdt.o
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
++obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
++obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
++obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
++
++subdir-$(CONFIG_MWAVE) += mwave
++ifeq ($(CONFIG_MWAVE),y)
++  obj-y += mwave/mwave.o
++endif
++
++subdir-$(CONFIG_IPMI_HANDLER) += ipmi
++ifeq ($(CONFIG_IPMI_HANDLER),y)
++  obj-y += ipmi/ipmi.o
++endif
++
++include $(TOPDIR)/Rules.make
++
++fastdep:
++
++conmakehash: conmakehash.c
++	$(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c
++
++consolemap_deftbl.c: $(FONTMAPFILE) conmakehash
++	./conmakehash $(FONTMAPFILE) > consolemap_deftbl.c
++
++consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h
++
++.DELETE_ON_ERROR:
++
++defkeymap.c: defkeymap.map
++	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++qtronixmap.c: qtronixmap.map
++	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++ibm_workpad_keymap.c: ibm_workpad_keymap.map
++	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++victor_mpc30x_keymap.c: victor_mpc30x_keymap.map
++	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+diff -urN linux.old/drivers/char/avalanche_vlynq/Makefile linux.dev/drivers/char/avalanche_vlynq/Makefile
+--- linux.old/drivers/char/avalanche_vlynq/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/Makefile	2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,16 @@
++#
++# Makefile for the linux kernel.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++# Note 2! The CFLAGS definitions are now in the main makefile...
++
++O_TARGET := avalanche_vlynq.o
++
++export-objs := vlynq_board.o
++
++obj-y    +=  vlynq_drv.o  vlynq_hal.o  vlynq_board.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_board.c linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_board.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c	2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,184 @@
++/*
++ * Jeff Harrell, jharrell@ti.com
++ * Copyright (C) 2001 Texas Instruments, Inc.  All rights reserved.
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Texas Instruments Sangam specific setup.
++ */
++#include <linux/config.h>
++#include <linux/module.h>
++#include <asm/ar7/sangam.h>  
++#include <asm/ar7/avalanche_misc.h>  
++#include <asm/ar7/vlynq.h>  
++   
++#define SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR	30 	/* MSB - 1 bit */
++#define SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR	31 	/* MSB bit */
++#define SYS_VLYNQ_OPTIONS 		        0x7F; 	/* all options*/
++
++/* These defines are board specific */
++
++
++#define VLYNQ0_REMOTE_WINDOW1_OFFSET           (0x0C000000)
++#define VLYNQ0_REMOTE_WINDOW1_SIZE             (0x500)
++
++
++#define VLYNQ1_REMOTE_WINDOW1_OFFSET           (0x0C000000)
++#define VLYNQ1_REMOTE_WINDOW1_SIZE             (0x500)
++
++
++extern VLYNQ_DEV vlynqDevice0, vlynqDevice1;
++int    vlynq_init_status[2] = {0, 0};
++EXPORT_SYMBOL(vlynq_init_status);
++static int reset_hack = 1;
++
++void vlynq_ar7wrd_dev_init()
++{
++    *(unsigned long*) AVALANCHE_GPIO_ENBL    |= (1<<18);
++    vlynq_delay(20000);
++    *(unsigned long*) AVALANCHE_GPIO_DIR     &= ~(1<<18);
++    vlynq_delay(20000);
++    *(unsigned long*) AVALANCHE_GPIO_DATA_OUT&= ~(1<<18);
++    vlynq_delay(50000);
++    *(unsigned long*) AVALANCHE_GPIO_DATA_OUT|=  (1<<18);
++    vlynq_delay(50000);
++
++    /* Initialize the MIPS host vlynq driver for a given vlynq interface */
++    vlynqDevice0.dev_idx = 0;			/* first vlynq module - this parameter is for reference only */
++    vlynqDevice0.module_base = AVALANCHE_LOW_VLYNQ_CONTROL_BASE; 	/*  vlynq0 module base address */
++
++#if defined(CONFIG_VLYNQ_CLK_LOCAL)
++    vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_LOCAL;   
++#else
++    vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_REMOTE;   
++#endif
++    vlynqDevice0.clk_div = 0x01; 			/* board/hardware specific */
++    vlynqDevice0.state =  VLYNQ_DRV_STATE_UNINIT; 	/* uninitialized module */
++
++    /* Populate vlynqDevice0.local_mem & Vlynq0.remote_mem based on system configuration */ 
++    /*Local memory configuration */
++
++                /* Demiurg : not good !*/
++#if 0
++    vlynqDevice0.local_mem.Txmap= AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE & ~(0xc0000000) ; /* physical address */
++    vlynqDevice0.remote_mem.RxOffset[0]= VLYNQ0_REMOTE_WINDOW1_OFFSET; /* This is specific to the board on the other end */
++    vlynqDevice0.remote_mem.RxSize[0]=VLYNQ0_REMOTE_WINDOW1_SIZE;
++#endif
++
++                /* Demiurg : This is how it should be ! */
++                vlynqDevice0.local_mem.Txmap = PHYSADDR(AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE);
++#define VLYNQ_ACX111_MEM_OFFSET     0xC0000000  /* Physical address of ACX111 memory */
++#define VLYNQ_ACX111_MEM_SIZE       0x00040000  /* Total size of the ACX111 memory   */
++#define VLYNQ_ACX111_REG_OFFSET     0xF0000000  /* PHYS_ADDR of ACX111 control registers   */
++#define VLYNQ_ACX111_REG_SIZE       0x00022000  /* Size of ACX111 registers area, MAC+PHY  */
++#define ACX111_VL1_REMOTE_SIZE 0x1000000
++                vlynqDevice0.remote_mem.RxOffset[0]  =  VLYNQ_ACX111_MEM_OFFSET;
++                vlynqDevice0.remote_mem.RxSize[0]    =  VLYNQ_ACX111_MEM_SIZE  ;
++                vlynqDevice0.remote_mem.RxOffset[1]  =  VLYNQ_ACX111_REG_OFFSET;
++                vlynqDevice0.remote_mem.RxSize[1]    =  VLYNQ_ACX111_REG_SIZE  ;
++                vlynqDevice0.remote_mem.Txmap        =  0;
++                vlynqDevice0.local_mem.RxOffset[0]   =  AVALANCHE_SDRAM_BASE;
++                vlynqDevice0.local_mem.RxSize[0]     =  ACX111_VL1_REMOTE_SIZE;
++
++
++    /* Local interrupt configuration */
++    vlynqDevice0.local_irq.intLocal = VLYNQ_INT_LOCAL; 	/* Host handles vlynq interrupts*/
++    vlynqDevice0.local_irq.intRemote = VLYNQ_INT_ROOT_ISR;  	/* vlynq root isr used */
++    vlynqDevice0.local_irq.map_vector = SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR;
++    vlynqDevice0.local_irq.intr_ptr = 0; /* Since remote interrupts part of vlynq root isr this is unused */
++
++    /* Remote interrupt configuration */
++    vlynqDevice0.remote_irq.intLocal = VLYNQ_INT_REMOTE; 	/* MIPS handles interrupts */
++    vlynqDevice0.remote_irq.intRemote = VLYNQ_INT_ROOT_ISR;  	/* Not significant since MIPS handles interrupts */
++    vlynqDevice0.remote_irq.map_vector = SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR;
++    vlynqDevice0. remote_irq.intr_ptr = AVALANCHE_INTC_BASE; /* Not significant since MIPS handles interrupts */
++
++     if(reset_hack != 1)
++       printk("About to re-init the VLYNQ.\n");
++
++    if(vlynq_init(&vlynqDevice0,VLYNQ_INIT_PERFORM_ALL)== 0)
++    {
++        /* Suraj added the following to keep the 1130 going. */
++        vlynq_interrupt_vector_set(&vlynqDevice0, 0 /* intr vector line running into 1130 vlynq */,
++                                   0 /* intr mapped onto the interrupt register on remote vlynq and this vlynq */,
++                                   VLYNQ_REMOTE_DVC, 0 /* polarity active high */, 0 /* interrupt Level triggered */);
++
++        /* System wide interrupt is 80 for 1130, please note. */
++        vlynq_init_status[0] = 1;
++        reset_hack = 2;
++    }
++    else
++    {
++        if(reset_hack == 1)
++            printk("VLYNQ INIT FAILED: Please try cold reboot. \n");
++        else
++            printk("Failed to initialize the VLYNQ interface at insmod.\n");
++
++    }
++}
++
++void  vlynq_dev_init(void)
++{
++    volatile unsigned int *reset_base = (unsigned int *) AVALANCHE_RESET_CONTROL_BASE;
++
++    *reset_base &= ~((1 << AVALANCHE_LOW_VLYNQ_RESET_BIT)); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT)); */
++
++    vlynq_delay(20000);
++
++    /* Bring vlynq out of reset if not already done */
++    *reset_base |= (1 << AVALANCHE_LOW_VLYNQ_RESET_BIT); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT); */
++    vlynq_delay(20000); /* Allowing sufficient time to VLYNQ to settle down.*/
++
++    vlynq_ar7wrd_dev_init( );
++
++}
++
++/* This function is board specific and should be ported for each board. */
++void remote_vlynq_dev_reset_ctrl(unsigned int module_reset_bit,
++                                 AVALANCHE_RESET_CTRL_T reset_ctrl)
++{
++    if(module_reset_bit >= 32)
++        return;
++
++    switch(module_reset_bit)
++    {
++        case 0:
++            if(OUT_OF_RESET == reset_ctrl)
++            {
++                if(reset_hack) return;
++
++                vlynq_delay(20000);
++                printk("Un-resetting the remote device.\n");
++                vlynq_dev_init();
++                printk("Re-initialized the VLYNQ.\n");
++                reset_hack = 2;
++            }
++            else if(IN_RESET == reset_ctrl)
++            {
++                *(unsigned long*) AVALANCHE_GPIO_DATA_OUT &= ~(1<<18);
++
++                vlynq_delay(20000);
++                printk("Resetting the remote device.\n");
++                reset_hack = 0;
++            }
++            else
++                ;
++        break;
++
++        default:
++        break;
++
++    }
++}
++
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c	2005-11-10 01:10:45.891577500 +0100
+@@ -0,0 +1,243 @@
++/******************************************************************************
++ * FILE PURPOSE:    Vlynq Linux Device Driver Source
++ ******************************************************************************
++ * FILE NAME:       vlynq_drv.c
++ *
++ * DESCRIPTION:     Vlynq Linux Device Driver Source
++ *
++ * REVISION HISTORY:
++ *
++ * Date           Description                       Author
++ *-----------------------------------------------------------------------------
++ * 17 July 2003   Initial Creation                  Anant Gole
++ * 17 Dec  2003   Updates                           Sharath Kumar
++ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ *******************************************************************************/
++ 
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/miscdevice.h>
++#include <linux/smp_lock.h>
++#include <linux/delay.h>
++#include <linux/proc_fs.h>
++#include <linux/capability.h>
++#include <asm/ar7/avalanche_intc.h>
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/vlynq.h>
++
++
++#define    TI_VLYNQ_VERSION                 "0.2"
++
++/* debug on ? */
++#define VLYNQ_DEBUG 
++
++/* Macro for debug and error printf's */
++#ifdef VLYNQ_DEBUG
++#define DBGPRINT  printk
++#else
++#define DBGPRINT(x)  
++#endif
++
++#define ERRPRINT  printk
++
++/* Define the max vlynq ports this driver will support. 
++   Device name strings are statically added here */
++#define MAX_VLYNQ_PORTS 2
++
++
++/* Type define for VLYNQ private structure */
++typedef struct vlynqPriv{
++    int irq;
++    VLYNQ_DEV *vlynqDevice;
++}VLYNQ_PRIV;
++
++extern int vlynq_init_status[2];
++
++/* Extern Global variable for vlynq devices used in initialization of the vlynq device
++ * These variables need to be populated/initialized by the system as part of initialization
++ * process. The vlynq enumerator can run at initialization and populate these globals
++ */
++
++VLYNQ_DEV vlynqDevice0;
++VLYNQ_DEV vlynqDevice1;
++
++/* Defining dummy macro AVALANCHE_HIGH_VLYNQ_INT to take
++ * care of compilation in case of single vlynq device 
++ */
++
++#ifndef AVALANCHE_HIGH_VLYNQ_INT
++#define  AVALANCHE_HIGH_VLYNQ_INT 0
++#endif
++
++
++
++/* vlynq private object */
++VLYNQ_PRIV vlynq_priv[CONFIG_AR7_VLYNQ_PORTS] = {
++    { LNXINTNUM(AVALANCHE_LOW_VLYNQ_INT),&vlynqDevice0},
++    { LNXINTNUM(AVALANCHE_HIGH_VLYNQ_INT),&vlynqDevice1},
++};
++
++extern void vlynq_dev_init(void);
++
++
++/* =================================== all the operations */
++
++static int
++vlynq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++    return 0;
++}
++
++static struct file_operations vlynq_fops = {
++    owner:      THIS_MODULE,
++    ioctl:      vlynq_ioctl,
++};
++
++/* Vlynq device object */
++static struct miscdevice vlynq_dev [MAX_VLYNQ_PORTS] = {
++    { MISC_DYNAMIC_MINOR , "vlynq0", &vlynq_fops },
++    { MISC_DYNAMIC_MINOR , "vlynq1", &vlynq_fops },
++};
++
++
++/* Proc read function */
++static int
++vlynq_read_link_proc(char *buf, char **start, off_t offset, int count, int *eof, void *unused)
++{
++    int instance;
++    int len = 0;
++ 
++    len += sprintf(buf +len,"VLYNQ Devices : %d\n",CONFIG_AR7_VLYNQ_PORTS);
++
++    for(instance =0;instance < CONFIG_AR7_VLYNQ_PORTS;instance++)
++    {
++        int link_state;
++        char *link_msg[] = {" DOWN "," UP "};
++       
++        if(vlynq_init_status[instance] == 0)
++            link_state = 0; 
++
++        else if (vlynq_link_check(vlynq_priv[instance].vlynqDevice))
++            link_state = 1;
++
++        else
++            link_state = 0;    
++
++        len += sprintf(buf + len, "VLYNQ %d: Link state: %s\n",instance,link_msg[link_state]);
++
++    }
++    /* Print info about vlynq device 1 */
++   
++    return len;
++}
++
++
++/* Proc function to display driver version */                                                                       
++static int                                                                                     
++vlynq_read_ver_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)        
++{                                                                                              
++	int instance;                                                                              
++	int len=0;                                                                                 
++                                                                                               
++	len += sprintf(buf +len,"\nTI Linux VLYNQ Driver Version %s\n",TI_VLYNQ_VERSION);         
++	return len;                                                                                
++}                                                                                              
++
++
++
++
++/* Wrapper for vlynq ISR */
++static void lnx_vlynq_root_isr(int irq, void * arg, struct pt_regs *regs)
++{
++   vlynq_root_isr(arg);
++}
++
++/* =================================== init and cleanup */
++
++int vlynq_init_module(void)
++{
++    int ret;
++    int unit = 0;
++    int instance_count = CONFIG_AR7_VLYNQ_PORTS;
++    volatile int *ptr;
++
++    vlynq_dev_init();
++
++    DBGPRINT("Vlynq CONFIG_AR7_VLYNQ_PORTS=%d\n", CONFIG_AR7_VLYNQ_PORTS);
++    /* If num of configured vlynq ports > supported by driver return error */
++    if (instance_count > MAX_VLYNQ_PORTS)
++    {
++        ERRPRINT("ERROR: vlynq_init_module(): Max %d supported\n", MAX_VLYNQ_PORTS);
++        return (-1);
++    }
++
++    /* register the misc device */
++    for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
++    {
++        ret = misc_register(&vlynq_dev[unit]);
++
++        if(ret < 0)
++        {
++            ERRPRINT("ERROR:Could not register vlynq device:%d\n",unit);
++            continue;
++        }
++        else 
++            DBGPRINT("Vlynq Device %s registered with minor no %d as misc device. Result=%d\n", 
++                vlynq_dev[unit].name, vlynq_dev[unit].minor, ret);
++#if 0
++            
++        DBGPRINT("Calling vlynq init\n");
++
++        /* Read the global variable for VLYNQ device structure and initialize vlynq driver */
++        ret = vlynq_init(vlynq_priv[unit].vlynqDevice,VLYNQ_INIT_PERFORM_ALL );
++#endif
++
++        if(vlynq_init_status[unit] == 0)
++        {
++            printk("VLYNQ %d : init failed\n",unit); 
++            continue;
++        }
++         
++        /* Check link before proceeding */
++        if (!vlynq_link_check(vlynq_priv[unit].vlynqDevice))
++        {
++ 	    DBGPRINT("\nError: Vlynq link not available.trying once before  Exiting");
++        }
++        else
++        {
++            DBGPRINT("Vlynq instance:%d Link UP\n",unit);
++        
++            /* Install the vlynq local root ISR */
++           request_irq(vlynq_priv[unit].irq,lnx_vlynq_root_isr,0,vlynq_dev[unit].name,vlynq_priv[unit].vlynqDevice);
++        } 
++    }
++
++    proc_mkdir("avalanche", NULL);
++    /* Creating proc entry for the devices */
++    create_proc_read_entry("avalanche/vlynq_link", 0, NULL, vlynq_read_link_proc, NULL);
++    create_proc_read_entry("avalanche/vlynq_ver", 0, NULL, vlynq_read_ver_proc, NULL);
++  
++    return 0;
++}
++
++void vlynq_cleanup_module(void)
++{
++    int unit = 0;
++    
++    for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
++    {
++        DBGPRINT("vlynq_cleanup_module(): Unregistring misc device %s\n",vlynq_dev[unit].name);
++        misc_deregister(&vlynq_dev[unit]);
++    }
++
++    remove_proc_entry("avalanche/vlynq_link", NULL);
++    remove_proc_entry("avalanche/vlynq_ver", NULL);
++}
++
++
++module_init(vlynq_init_module);
++module_exit(vlynq_cleanup_module);
++
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c	2005-11-10 01:10:45.975582750 +0100
+@@ -0,0 +1,1214 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**|                                ****                                  |**
++**|                                ****                                  |**
++**|                                ******o***                            |**
++**|                          ********_///_****                           |**
++**|                           ***** /_//_/ ****                          |**
++**|                            ** ** (__/ ****                           |**
++**|                                *********                             |**
++**|                                 ****                                 |**
++**|                                  ***                                 |**
++**|                                                                      |**
++**|     Copyright (c) 2003 Texas Instruments Incorporated                |**
++**|                        ALL RIGHTS RESERVED                           |**
++**|                                                                      |**
++**| Permission is hereby granted to licensees of Texas Instruments       |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products.     |**
++**| No other rights to reproduce, use, or disseminate this computer      |**
++**| program, whether in part or in whole, are granted.                   |**
++**|                                                                      |**
++**| TI makes no representation or warranties with respect to the         |**
++**| performance of this computer program, and specifically disclaims     |**
++**| any responsibility for any damages, special or consequential,        |**
++**| connected with the use of this program.                              |**
++**|                                                                      |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/***************************************************************************
++ *  ------------------------------------------------------------------------------
++ *   Module      : vlynq_hal.c
++ *   Description : This file implements VLYNQ HAL API.
++ *  ------------------------------------------------------------------------------
++ ***************************************************************************/
++
++#include <linux/stddef.h>
++#include <linux/types.h>
++#include <asm/ar7/vlynq.h>
++
++/**** Local Function prototypes *******/
++static int vlynqInterruptInit(VLYNQ_DEV *pdev);
++static void  vlynq_configClock(VLYNQ_DEV  *pdev);
++
++/*** Second argument must be explicitly type casted to 
++ * (VLYNQ_DEV*) inside the following functions */
++static void vlynq_local_module_isr(void *arg1, void *arg2, void *arg3);
++static void vlynq_remote_module_isr(void *arg1, void *arg2, void *arg3);
++
++
++volatile int vlynq_delay_value = 0;
++
++/* Code adopted from original vlynq driver */
++void vlynq_delay(unsigned int clktime)
++{
++    int i = 0;
++    volatile int    *ptr = &vlynq_delay_value;
++    *ptr = 0;
++
++    /* We are assuming that the each cycle takes about 
++     * 23 assembly instructions. */
++    for(i = 0; i < (clktime + 23)/23; i++)
++    {
++        *ptr = *ptr + 1;
++    }
++}
++
++
++/* ----------------------------------------------------------------------------
++ *  Function : vlynq_configClock()
++ *  Description: Configures clock settings based on input parameters
++ *  Adapted from original vlyna driver from Cable
++ */
++static void vlynq_configClock(VLYNQ_DEV * pdev)
++{
++    unsigned int tmp;
++
++    switch( pdev->clk_source)
++    {
++        case VLYNQ_CLK_SOURCE_LOCAL:  /* we output the clock, clk_div in range [1..8]. */
++            tmp = ((pdev->clk_div - 1) << 16) |  VLYNQ_CTL_CLKDIR_MASK ;
++            VLYNQ_CTRL_REG = tmp;
++            VLYNQ_R_CTRL_REG = 0ul;
++            break;
++        case VLYNQ_CLK_SOURCE_REMOTE: /* we need to set the clock pin as input */
++            VLYNQ_CTRL_REG = 0ul;
++            tmp = ((pdev->clk_div - 1) << 16) |  VLYNQ_CTL_CLKDIR_MASK ;
++            VLYNQ_R_CTRL_REG = tmp;
++            break;
++        default:   /* do nothing about the clock, but clear other bits. */
++            tmp = ~(VLYNQ_CTL_CLKDIR_MASK | VLYNQ_CTL_CLKDIV_MASK);
++            VLYNQ_CTRL_REG &= tmp;
++            break;
++   }
++}
++
++ /* ----------------------------------------------------------------------------
++ *  Function : vlynq_link_check()
++ *  Description: This function checks the current VLYNQ for a link.
++ *  An arbitrary amount of time is allowed for the link to come up .
++ *  Returns 0 for "no link / failure " and 1 for "link available".
++ * -----------------------------------------------------------------------------
++ */
++unsigned int vlynq_link_check( VLYNQ_DEV * pdev)
++{
++    /*sleep for 64 cycles, allow link to come up*/
++    vlynq_delay(64);  
++      
++    /* check status register return OK if link is found. */
++    if (VLYNQ_STATUS_REG & VLYNQ_STS_LINK_MASK) 
++    {
++        return 1;   /* Link Available */
++    }
++    else
++    {
++        return 0;   /* Link Failure */
++    }
++}
++
++/* ----------------------------------------------------------------------------
++ *  Function : vlynq_init()
++ *  Description: Initialization function accepting paramaters for VLYNQ module
++ *  initialization. The Options bitmap decides what operations are performed
++ *  as a part of initialization. The Input parameters  are obtained through the
++ *  sub fields of VLYNQ_DEV structure.
++ */
++
++int vlynq_init(VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options)
++{
++    unsigned int map;
++    unsigned int val=0,cnt,tmp;
++    unsigned int counter=0;
++    VLYNQ_INTERRUPT_CNTRL *intSetting=NULL;
++
++    /* validate arguments */
++    if( VLYNQ_OUTRANGE(pdev->clk_source, VLYNQ_CLK_SOURCE_REMOTE, VLYNQ_CLK_SOURCE_NONE) || 
++        VLYNQ_OUTRANGE(pdev->clk_div, 8, 1) )
++    {
++      return VLYNQ_INVALID_ARG;
++    }
++   
++    /** perform all sanity checks first **/
++    if(pdev->state != VLYNQ_DRV_STATE_UNINIT)
++        return VLYNQ_INVALID_DRV_STATE;
++
++    /** Initialize local and remote register set addresses- additional
++     * provision to access the registers directly if need be */
++    pdev->local = (VLYNQ_REG_SET*)pdev->module_base;
++    pdev->remote = (VLYNQ_REG_SET*) (pdev->module_base + VLYNQ_REMOTE_REGS_OFFSET);
++
++    /* Detect faulty int configuration that might induce int pkt looping */
++    if ( (options  & VLYNQ_INIT_LOCAL_INTERRUPTS) && (options & VLYNQ_INIT_REMOTE_INTERRUPTS) )
++    {
++        /* case when both local and remote are configured */
++        if((pdev->local_irq.intLocal== VLYNQ_INT_REMOTE )  /* interrupts transfered to remote from local */
++        && (pdev->remote_irq.intLocal== VLYNQ_INT_REMOTE)  /* interrupts transfered from remote to local */
++        && ((pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) || (pdev->remote_irq.intRemote == VLYNQ_INT_ROOT_ISR)) )
++        {
++            return (VLYNQ_INT_CONFIG_ERR); 
++        }
++    }
++
++    pdev->state = VLYNQ_DRV_STATE_ININIT;
++    pdev->intCount = 0;
++    pdev->isrCount = 0;
++
++    /*** Its assumed that the vlynq module  has been brought out of reset
++     * before invocation of vlynq_init. Since, this operation is board specific
++     * it must be handled outside this generic driver */
++   
++    /* Assert reset the remote device, call reset_cb,
++     * reset CB holds Reset according to the device needs. */
++    VLYNQ_RESETCB(VLYNQ_RESET_ASSERT);
++
++    /* Handle VLYNQ clock, HW default (Sense On Reset) is
++     * usually input for all the devices. */        
++    if (options & VLYNQ_INIT_CONFIG_CLOCK)
++    {
++        vlynq_configClock(pdev);
++    }
++ 
++    /* Call reset_cb again. It will release the remote device 
++     * from reset, and wait for a while. */
++    VLYNQ_RESETCB(VLYNQ_RESET_DEASSERT);
++
++    if(options & VLYNQ_INIT_CHECK_LINK )
++    {
++        /* Check for link up during initialization*/
++	while( counter < 25 )
++	{
++	/* loop around giving a chance for link status to settle down */
++	counter++;
++        if(vlynq_link_check(pdev))
++        {
++           /* Link is up exit loop*/
++	   break;
++        }
++
++	vlynq_delay(4000);
++	}/*end of while counter loop */
++
++        if(!vlynq_link_check(pdev))
++        {
++            /* Handle this case as abort */
++            pdev->state = VLYNQ_DRV_STATE_ERROR;
++            VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
++            return VLYNQ_LINK_DOWN;
++        }/* end of if not vlynq_link_check conditional block */
++      
++    }/*end of if options & VLYNQ_INIT_CHECK_LINK conditional block */
++
++
++    if (options & VLYNQ_INIT_LOCAL_MEM_REGIONS)
++    {
++        /* Initialise local memory regions . This initialization lets
++         * the local host access remote device memory regions*/   
++        int i; 
++
++        /* configure the VLYNQ portal window to a PHYSICAL
++         * address of the local CPU */
++        VLYNQ_ALIGN4(pdev->local_mem.Txmap);
++        VLYNQ_TXMAP_REG = (pdev->local_mem.Txmap); 
++        
++        /*This code assumes input parameter is itself a physical address */
++        for(i=0; i < VLYNQ_MAX_MEMORY_REGIONS ; i++)
++        {
++            /* Physical address on the remote */
++            map = i+1;
++            VLYNQ_R_RXMAP_SIZE_REG(map) =  0;
++            if( pdev->remote_mem.RxSize[i])
++            {
++                VLYNQ_ALIGN4(pdev->remote_mem.RxOffset[i]);            
++                VLYNQ_ALIGN4(pdev->remote_mem.RxSize[i]);
++                VLYNQ_R_RXMAP_OFFSET_REG(map) = pdev->remote_mem.RxOffset[i];
++                VLYNQ_R_RXMAP_SIZE_REG(map) = pdev->remote_mem.RxSize[i];
++            }
++        }
++    }
++
++    if(options & VLYNQ_INIT_REMOTE_MEM_REGIONS )
++    {
++        int i;
++
++        /* Initialise remote memory regions. This initialization lets remote
++         * device access local host memory regions. It configures the VLYNQ portal
++         * window to a PHYSICAL address of the remote */
++        VLYNQ_ALIGN4(pdev->remote_mem.Txmap);            
++        VLYNQ_R_TXMAP_REG = pdev->remote_mem.Txmap;
++       
++        for( i=0; i<VLYNQ_MAX_MEMORY_REGIONS; i++)
++        {
++            /* Physical address on the local */
++            map = i+1;
++            VLYNQ_RXMAP_SIZE_REG(map) =  0;
++            if( pdev->local_mem.RxSize[i])
++            {
++                VLYNQ_ALIGN4(pdev->local_mem.RxOffset[i]);            
++                VLYNQ_ALIGN4(pdev->local_mem.RxSize[i]);
++                VLYNQ_RXMAP_OFFSET_REG(map) =  (pdev->local_mem.RxOffset[i]);
++                VLYNQ_RXMAP_SIZE_REG(map) =  (pdev->local_mem.RxSize[i]);
++            }
++        }
++    }
++
++    /* Adapted from original vlynq driver from cable - Calculate VLYNQ bus width */
++    pdev->width = 3 +  VLYNQ_STATUS_FLD_WIDTH(VLYNQ_STATUS_REG) 
++                  + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_R_STATUS_REG);
++   
++    /* chance to initialize the device, e.g. to boost VLYNQ 
++     * clock by modifying pdev->clk_div or and verify the width. */
++    VLYNQ_RESETCB(VLYNQ_RESET_LINKESTABLISH);
++
++    /* Handle VLYNQ clock, HW default (Sense On Reset) is
++     * usually input for all the devices. */
++    if(options & VLYNQ_INIT_CONFIG_CLOCK )
++    {
++        vlynq_configClock(pdev);
++    }
++
++    /* last check for link*/
++    if(options & VLYNQ_INIT_CHECK_LINK )
++    {
++     /* Final Check for link during initialization*/
++	while( counter < 25 )
++	{
++	/* loop around giving a chance for link status to settle down */
++	counter++;
++        if(vlynq_link_check(pdev))
++        {
++           /* Link is up exit loop*/
++	   break;
++        }
++
++	vlynq_delay(4000);
++	}/*end of while counter loop */
++
++        if(!vlynq_link_check(pdev))
++        {
++            /* Handle this case as abort */
++            pdev->state = VLYNQ_DRV_STATE_ERROR;
++            VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
++            return VLYNQ_LINK_DOWN;
++        }/* end of if not vlynq_link_check conditional block */
++        
++    } /* end of if options & VLYNQ_INIT_CHECK_LINK */
++
++    if(options & VLYNQ_INIT_LOCAL_INTERRUPTS )
++    {
++        /* Configure local interrupt settings */
++        intSetting = &(pdev->local_irq);
++
++        /* Map local module status interrupts to interrupt vector*/
++        val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
++      
++        /* enable local module status interrupts */
++        val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
++      
++        if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
++        {
++            /*set the intLocal bit*/
++            val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
++        }
++      
++        /* Irrespective of whether interrupts are handled locally, program
++         * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
++         * i.e remote packets are set intPending register->which will result in 
++         * same packet being sent out) has been done already
++         */
++      
++        if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) 
++        {
++            /* Set the int2Cfg register, so that remote interrupt
++             * packets are written to intPending register */
++            val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
++    
++            /* Set intPtr register to point to intPending register */
++            VLYNQ_INT_PTR_REG = VLYNQ_INT_PENDING_REG_PTR ;
++        }
++        else
++        {
++            /*set the interrupt pointer register*/
++            VLYNQ_INT_PTR_REG = intSetting->intr_ptr;
++            /* Dont bother to modify int2Cfg as it would be zero */
++        }
++
++        /** Clear bits related to INT settings in control register **/
++        VLYNQ_CTRL_REG = VLYNQ_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
++      
++        /** Or the bits to be set with Control register **/
++        VLYNQ_CTRL_REG = VLYNQ_CTRL_REG | val;
++
++        /* initialise local ICB */          
++        if(vlynqInterruptInit(pdev)==VLYNQ_MEMALLOC_FAIL)
++            return VLYNQ_MEMALLOC_FAIL;   
++
++        /* Install handler for local module status interrupts. By default when 
++         * local interrupt setting is initialised, the local module status are 
++         * enabled and handler hooked up */
++        if(vlynq_install_isr(pdev, intSetting->map_vector, vlynq_local_module_isr, 
++                             pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
++            return VLYNQ_INVALID_ARG;
++    } /* end of init local interrupts */
++
++    if(options & VLYNQ_INIT_REMOTE_INTERRUPTS )
++    {
++        /* Configure remote interrupt settings from configuration */          
++        intSetting = &(pdev->remote_irq);
++
++        /* Map remote module status interrupts to remote interrupt vector*/
++        val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
++        /* enable remote module status interrupts */
++        val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
++      
++        if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
++        {
++            /*set the intLocal bit*/
++            val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
++        }
++
++        /* Irrespective of whether interrupts are handled locally, program
++         * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
++         * i.e remote packets are set intPending register->which will result in 
++         * same packet being sent out) has been done already
++        */ 
++
++        if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) 
++        {
++            /* Set the int2Cfg register, so that remote interrupt
++             * packets are written to intPending register */
++            val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
++            /* Set intPtr register to point to intPending register */
++            VLYNQ_R_INT_PTR_REG = VLYNQ_R_INT_PENDING_REG_PTR ;
++        }
++        else
++        {
++            /*set the interrupt pointer register*/
++            VLYNQ_R_INT_PTR_REG = intSetting->intr_ptr;
++            /* Dont bother to modify int2Cfg as it would be zero */
++        }
++    
++        if( (intSetting->intLocal == VLYNQ_INT_REMOTE) && 
++            (options & VLYNQ_INIT_LOCAL_INTERRUPTS) &&
++            (pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) )
++        {
++            /* Install handler for remote module status interrupts. By default when 
++             * remote interrupts are forwarded to local root_isr then remote_module_isr is
++             * enabled and handler hooked up */
++            if(vlynq_install_isr(pdev,intSetting->map_vector,vlynq_remote_module_isr,
++                                 pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
++                return VLYNQ_INVALID_ARG;
++        }
++
++         
++        /** Clear bits related to INT settings in control register **/
++        VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
++      
++        /** Or the bits to be set with the remote Control register **/
++        VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG | val;
++         
++    } /* init remote interrupt settings*/
++
++    if(options & VLYNQ_INIT_CLEAR_ERRORS )
++    {
++        /* Clear errors during initialization */
++        tmp = VLYNQ_STATUS_REG  & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
++        VLYNQ_STATUS_REG = tmp;
++        tmp = VLYNQ_R_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
++        VLYNQ_R_STATUS_REG = tmp;
++    } 
++
++    /* clear int status */
++    val = VLYNQ_INT_STAT_REG;
++    VLYNQ_INT_STAT_REG = val;
++    
++    /* finish initialization */
++    pdev->state = VLYNQ_DRV_STATE_RUN;
++    VLYNQ_RESETCB( VLYNQ_RESET_INITOK);
++    return VLYNQ_SUCCESS;
++
++}
++
++
++/* ----------------------------------------------------------------------------
++ *  Function : vlynqInterruptInit()
++ *  Description: This local function is used to set up the ICB table for the 
++ *  VLYNQ_STATUS_REG vlynq module. The input parameter "pdev" points the vlynq
++ *  device instance whose ICB is allocated.
++ *  Return : returns VLYNQ_SUCCESS or vlynq error for failure
++ * -----------------------------------------------------------------------------
++ */
++static int vlynqInterruptInit(VLYNQ_DEV *pdev)
++{
++    int i, numslots;
++
++    /* Memory allocated statically.
++     * Initialise ICB,free list.Indicate primary slot empty.
++     * Intialise intVector <==> map_vector translation table*/
++    for(i=0; i < VLYNQ_NUM_INT_BITS; i++)
++    {
++        pdev->pIntrCB[i].isr = NULL;  
++        pdev->pIntrCB[i].next = NULL; /*nothing chained */
++        pdev->vector_map[i] = -1;   /* indicates unmapped  */
++    }
++
++    /* In the ICB slots, [VLYNQ_NUM_INT_BITS i.e 32 to ICB array size) are expansion slots
++     * required only when interrupt chaining/sharing is supported. In case
++     * of chained interrupts the list starts from primary slot and the
++     * additional slots are obtained from the common free area */
++
++    /* Initialise freelist */
++
++    numslots = VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS;
++    
++    if (numslots > VLYNQ_NUM_INT_BITS)
++    {
++        pdev->freelist = &(pdev->pIntrCB[VLYNQ_NUM_INT_BITS]);
++        
++        for(i = VLYNQ_NUM_INT_BITS; i < (numslots-1) ; i++)
++        {
++            pdev->pIntrCB[i].next = &(pdev->pIntrCB[i+1]);
++            pdev->pIntrCB[i].isr = NULL;
++        }
++        pdev->pIntrCB[i].next=NULL; /* Indicate end of freelist*/
++        pdev->pIntrCB[i].isr=NULL;
++    }  
++    else
++    {   
++        pdev->freelist = NULL;
++    }
++
++    /** Reset mapping for IV 0-7 **/
++    VLYNQ_IVR_03TO00_REG = 0;
++    VLYNQ_IVR_07TO04_REG = 0;
++
++    return VLYNQ_SUCCESS;
++}
++
++/** remember that hooking up of root ISR handler with the interrupt controller 
++ *  is not done as a part of this driver. Typically, it must be done after
++ *  invoking vlynq_init*/
++
++
++ /* ----------------------------------------------------------------------------
++ *  ISR with the SOC interrupt controller. This ISR typically scans
++ *  the Int PENDING/SET register in the VLYNQ module and calls the
++ *  appropriate ISR associated with the correponding vector number.
++ * -----------------------------------------------------------------------------
++ */
++void vlynq_root_isr(void *arg)
++{
++    int    source;  /* Bit position of pending interrupt, start from 0 */
++    unsigned int interrupts, clrInterrupts;
++    VLYNQ_DEV * pdev;
++    VLYNQ_INTR_CNTRL_ICB *entry;
++
++    pdev=(VLYNQ_DEV*)(arg);          /*obtain the vlynq device pointer*/
++ 
++    interrupts =  VLYNQ_INT_STAT_REG; /* Get the list of pending interrupts */
++    VLYNQ_INT_STAT_REG = interrupts; /* clear the int CR register */
++    clrInterrupts = interrupts;      /* save them for further analysis */
++
++    debugPrint("vlynq_root_isr: dev %u. INTCR = 0x%08lx\n", pdev->dev_idx, clrInterrupts,0,0,0,0);
++
++    /* Scan interrupt bits */
++    source =0;
++    while( clrInterrupts != 0)
++    {
++        /* test if bit is set? */
++        if( 0x1ul & clrInterrupts)
++        {   
++            entry = &(pdev->pIntrCB[source]);   /* Get the ISR entry */
++            pdev->intCount++;                   /* update interrupt count */    
++            if(entry->isr != NULL)
++            {
++                do 
++                {
++                    pdev->isrCount++;   /* update isr invocation count */    
++                    /* Call the user ISR and update the count for ISR */
++		    entry->isrCount++;   
++                    entry->isr(entry->arg1, entry->arg2, entry->arg3);
++                    if (entry->next == NULL) break;
++                    entry = entry->next;
++
++                } while (entry->isr != NULL);
++            }
++            else
++            {   
++                debugPrint(" ISR not installed for vlynq vector:%d\n",source,0,0,0,0,0);
++            }
++        }
++        clrInterrupts >>= 1;    /* Next source bit */
++        ++source;
++    } /* endWhile clrInterrupts != 0 */
++}
++
++
++ /* ----------------------------------------------------------------------------
++ *  Function : vlynq_local__module_isr()
++ *  Description: This ISR is attached to the local VLYNQ interrupt vector
++ *  by the Vlynq Driver when local interrupts are being handled. i.e.
++ *  intLocal=1. This ISR handles local Vlynq module status interrupts only
++ *  AS a part of this ISR, user callback in VLYNQ_DEV structure
++ *  is invoked.
++ *  VLYNQ_DEV is passed as arg1. arg2 and arg3 are unused.
++ * -----------------------------------------------------------------------------
++ */
++static void vlynq_local_module_isr(void *arg1,void *arg2, void *arg3)
++{
++    VLYNQ_REPORT_CB func;
++    unsigned int dwStatRegVal;
++    VLYNQ_DEV * pdev;
++
++    pdev = (VLYNQ_DEV*) arg1;
++    /* Callback function is read from the device pointer that is passed as an argument */
++    func = pdev->report_cb;
++
++    /* read local status register */
++    dwStatRegVal = VLYNQ_STATUS_REG;
++
++    /* clear pending events */
++    VLYNQ_STATUS_REG = dwStatRegVal;
++   
++    /* invoke user callback */
++    if( func != NULL)
++        func( pdev, VLYNQ_LOCAL_DVC, dwStatRegVal);
++
++}
++
++ /* ----------------------------------------------------------------------------
++ *  Function : vlynq_remote_module_isr()
++ *  Description: This ISR is attached to the remote VLYNQ interrupt vector
++ *  by the Vlynq Driver when remote interrupts are being handled locally. i.e.
++ *  intLocal=1. This ISR handles local Vlynq module status interrupts only
++ *  AS a part of this ISR, user callback in VLYNQ_DEV structure
++ *  is invoked.
++ *  The parameters  irq,regs ar unused.
++ * -----------------------------------------------------------------------------
++ */
++static void vlynq_remote_module_isr(void *arg1,void *arg2, void *arg3)
++{
++    VLYNQ_REPORT_CB func;
++    unsigned int dwStatRegVal;
++    VLYNQ_DEV * pdev;
++
++   
++    pdev = (VLYNQ_DEV*) arg1;
++   
++    /* Callback function is read from the device pointer that is passed as an argument */
++   func = pdev->report_cb;
++
++    /* read local status register */
++    dwStatRegVal = VLYNQ_R_STATUS_REG;
++
++    /* clear pending events */
++    VLYNQ_R_STATUS_REG = dwStatRegVal;
++
++    /* invoke user callback */
++    if( func != NULL)
++        func( pdev, VLYNQ_REMOTE_DVC, dwStatRegVal);
++
++}
++
++/* ----------------------------------------------------------------------------
++ *  Function : vlynq_interrupt_get_count()
++ *  Description: This function returns the number of times a particular intr
++ *  has been invoked. 
++ *
++ *  It returns 0, if erroneous map_vector is specified or if the corres isr 
++ *  has not been registered with VLYNQ.
++ */
++unsigned int vlynq_interrupt_get_count(VLYNQ_DEV *pdev,
++					unsigned int map_vector)
++{
++    VLYNQ_INTR_CNTRL_ICB *entry;
++    unsigned int count = 0;
++
++    if (map_vector > (VLYNQ_NUM_INT_BITS-1)) 
++        return count;
++   
++    entry = &(pdev->pIntrCB[map_vector]);
++
++    if (entry)
++        count = entry->isrCount;
++
++    return (count);
++}
++
++
++/* ----------------------------------------------------------------------------
++ *  Function : vlynq_install_isr()
++ *  Description: This function installs ISR for Vlynq interrupt vector
++ *  bits(in IntPending register). This function should be used only when 
++ *  Vlynq interrupts are being handled locally(remote may be programmed to send
++ *  interrupt packets).Also, the int2cfg should be 1 and the least significant
++ *  8 bits of the Interrupt Pointer Register must point to Interrupt 
++ *  Pending/Set Register).
++ *  If host int2cfg=0 and the Interrupt Pointer register contains 
++ *  the address of the interrupt set register in the interrupt controller 
++ *  module of the local device , then the ISR for the remote interrupt must be 
++ *  directly registered with the Interrupt controller and must not use this API
++ *  Note: this function simply installs the ISR in ICB It doesnt modify
++ *  any register settings
++ */
++int 
++vlynq_install_isr(VLYNQ_DEV *pdev,
++                  unsigned int map_vector,
++                  VLYNQ_INTR_CNTRL_ISR isr,
++                  void *arg1, void *arg2, void *arg3)
++{
++    VLYNQ_INTR_CNTRL_ICB *entry;
++
++    if ( (map_vector > (VLYNQ_NUM_INT_BITS-1)) || (isr == NULL) ) 
++        return VLYNQ_INVALID_ARG;
++   
++    entry = &(pdev->pIntrCB[map_vector]);
++
++    if(entry->isr == NULL)
++    {
++        entry->isr = isr;
++        entry->arg1 = arg1;
++        entry->arg2 = arg2;
++        entry->arg3 = arg3;
++        entry->next = NULL;
++    }
++    else
++    {
++        /** No more empty slots,return error */
++        if(pdev->freelist == NULL)
++            return VLYNQ_MEMALLOC_FAIL;
++        
++        while(entry->next != NULL)
++        {
++            entry = entry->next;
++        }
++
++        /* Append new node to the chain */
++        entry->next = pdev->freelist;   
++        /* Remove the appended node from freelist */
++        pdev->freelist = pdev->freelist->next;  
++        entry= entry->next;
++         
++        /*** Set the ICB fields ***/
++        entry->isr = isr;
++        entry->arg1 = arg1;
++        entry->arg2 = arg2;
++        entry->arg3 = arg3;
++        entry->next = NULL;
++    }
++   
++    return VLYNQ_SUCCESS;
++}
++
++
++
++/* ----------------------------------------------------------------------------
++ *  Function : vlynq_uninstall_isr
++ *  Description: This function is used to uninstall a previously
++ *  registered ISR. In case of shared/chained interrupts, the 
++ *  void * arg parameter must uniquely identify the ISR to be
++ *  uninstalled.
++ *  Note: this function simply uninstalls the ISR in ICB
++ *  It doesnt modify any register settings
++ */
++int 
++vlynq_uninstall_isr(VLYNQ_DEV *pdev,
++                    unsigned int map_vector,
++                    void *arg1, void *arg2, void *arg3) 
++{
++    VLYNQ_INTR_CNTRL_ICB *entry,*temp;
++
++    if (map_vector > (VLYNQ_NUM_INT_BITS-1)) 
++        return VLYNQ_INVALID_ARG;
++   
++    entry = &(pdev->pIntrCB[map_vector]);
++
++    if(entry->isr == NULL ) 
++        return VLYNQ_ISR_NON_EXISTENT;
++
++    if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
++    {
++        if(entry->next == NULL)
++        {
++            entry->isr=NULL;
++            return VLYNQ_SUCCESS;
++        }
++        else
++        {
++            temp =  entry->next;
++            /* Copy next node in the chain to prim.slot */
++            entry->isr = temp->isr;
++            entry->arg1 = temp->arg1;
++            entry->arg2 = temp->arg2;
++            entry->arg3 = temp->arg3;
++            entry->next = temp->next;
++            /* Free the just copied node */
++            temp->isr = NULL;
++            temp->arg1 = NULL;
++            temp->arg2 = NULL;
++            temp->arg3 = NULL;
++            temp->next = pdev->freelist;
++            pdev->freelist = temp;
++            return VLYNQ_SUCCESS;
++        }
++    }
++    else
++    {
++        temp = entry;
++        while ( (entry = temp->next) != NULL)
++        {
++            if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
++            {
++                /* remove node from chain */
++                temp->next = entry->next; 
++                /* Add the removed node to freelist */
++                entry->isr = NULL;
++                entry->arg1 = NULL;
++                entry->arg2 = NULL;
++                entry->arg3 = NULL;
++                entry->next = pdev->freelist;
++                entry->isrCount = 0;
++                pdev->freelist  = entry;
++                return VLYNQ_SUCCESS;
++            }
++            temp = entry;
++        }
++    
++        return VLYNQ_ISR_NON_EXISTENT;
++    }
++}
++
++
++
++
++/* ----------------------------------------------------------------------------
++ *  function : vlynq_interrupt_vector_set()
++ *  description:configures interrupt vector mapping,interrupt type
++ *  polarity -all in one go.
++ */
++int 
++vlynq_interrupt_vector_set(VLYNQ_DEV *pdev,                 /* vlynq device */
++                           unsigned int int_vector,               /* int vector on vlynq device */
++                           unsigned int map_vector,               /* bit for this interrupt */
++                           VLYNQ_DEV_TYPE dev_type,         /* local or remote device */
++                           VLYNQ_INTR_POLARITY pol,         /* polarity of interrupt */
++                           VLYNQ_INTR_TYPE type)            /* pulsed/level interrupt */
++{
++    volatile unsigned int * vecreg;
++    unsigned int val=0;
++    unsigned int bytemask=0XFF;
++
++    /* use the lower 8 bits of val to set the value , shift it to 
++     * appropriate byte position in the ivr and write it to the 
++     * corresponding register */
++
++    /* validate the number of interrupts supported */
++    if (int_vector >= VLYNQ_IVR_MAXIVR) 
++        return VLYNQ_INVALID_ARG;
++        
++    if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) 
++        return VLYNQ_INVALID_ARG;
++
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /* Update the intVector<==> bit position translation table */
++    pdev->vector_map[map_vector] = int_vector;
++
++    /* val has been initialised to zero. we only have to turn on appropriate bits*/
++    if(type == VLYNQ_INTR_PULSED)
++        val |= VLYNQ_IVR_INTTYPE_MASK;
++        
++    if(pol == VLYNQ_INTR_ACTIVE_LOW)
++        val |= VLYNQ_IVR_INTPOL_MASK;
++
++    val |= map_vector;
++
++    /** clear the correct byte position and then or val **/
++    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++    /** write to correct byte position in vecreg*/
++    *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++    /* Setting a interrupt vector, leaves the interrupt disabled 
++     * which  must be enabled subsequently */
++
++    return VLYNQ_SUCCESS;
++}
++
++
++/* ----------------------------------------------------------------------------
++ *  Function : vlynq_interrupt_vector_cntl()
++ *  Description:enables/disable interrupt
++ */
++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++                                          unsigned int int_vector,
++                                          VLYNQ_DEV_TYPE dev_type,
++                                          unsigned int enable)
++{
++    volatile unsigned int *vecReg;
++    unsigned int val=0;
++    unsigned int intenMask=0x80;
++
++    /* validate the number of interrupts supported */
++    if (int_vector >= VLYNQ_IVR_MAXIVR) 
++        return VLYNQ_INVALID_ARG;
++
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecReg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecReg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /** Clear the correct byte position and then or val **/
++    *vecReg = (*vecReg) & ( ~(intenMask << ( (int_vector %4)*8) ) );
++
++    if(enable)
++    {
++        val |= VLYNQ_IVR_INTEN_MASK; 
++        /** Write to correct byte position in vecReg*/
++        *vecReg = (*vecReg) | (val << ( (int_vector % 4)*8) ) ;
++    }
++
++    return VLYNQ_SUCCESS;
++
++}/* end of function vlynq_interrupt_vector_cntl */
++
++
++
++/* ----------------------------------------------------------------------------
++ *  Function : vlynq_interrupt_vector_map()
++ *  Description:Configures interrupt vector mapping alone
++ */
++int 
++vlynq_interrupt_vector_map( VLYNQ_DEV *pdev,
++                            VLYNQ_DEV_TYPE dev_type,
++                            unsigned int int_vector,
++                            unsigned int map_vector)
++{
++    volatile unsigned int * vecreg;
++    unsigned int val=0;
++    unsigned int bytemask=0x1f;   /* mask to turn off bits corresponding to int vector */ 
++
++    /* use the lower 8 bits of val to set the value , shift it to 
++     * appropriate byte position in the ivr and write it to the 
++     * corresponding register */
++
++    /* validate the number of interrupts supported */
++    if (int_vector >= VLYNQ_IVR_MAXIVR) 
++        return VLYNQ_INVALID_ARG;
++        
++    if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) 
++        return VLYNQ_INVALID_ARG;
++
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /* Update the intVector<==> bit position translation table */
++    pdev->vector_map[map_vector] = int_vector;
++
++    /** val has been initialised to zero. we only have to turn on
++     * appropriate bits*/
++    val |= map_vector;
++
++    /** clear the correct byte position and then or val **/
++    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++    /** write to correct byte position in vecreg*/
++    *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++    return VLYNQ_SUCCESS;
++}
++
++
++/* ----------------------------------------------------------------------------
++ *  function : vlynq_interrupt_set_polarity()
++ *  description:configures interrupt polarity .
++ */
++int 
++vlynq_interrupt_set_polarity( VLYNQ_DEV *pdev ,
++                              VLYNQ_DEV_TYPE dev_type,
++                              unsigned int map_vector,
++                              VLYNQ_INTR_POLARITY pol)
++{
++    volatile unsigned int * vecreg;
++    int int_vector;
++    unsigned int val=0;
++    unsigned int bytemask=0x20; /** mask to turn off bits corresponding to int polarity */
++
++    /* get the int_vector from map_vector */
++    int_vector = pdev->vector_map[map_vector];
++
++    if(int_vector == -1) 
++        return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++    /* use the lower 8 bits of val to set the value , shift it to 
++     * appropriate byte position in the ivr and write it to the 
++     * corresponding register */
++
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /* val has been initialised to zero. we only have to turn on
++     * appropriate bits, if need be*/
++
++    /** clear the correct byte position and then or val **/
++    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++    if( pol == VLYNQ_INTR_ACTIVE_LOW)
++    {
++        val |= VLYNQ_IVR_INTPOL_MASK;
++        /** write to correct byte position in vecreg*/
++        *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++    }
++
++    return VLYNQ_SUCCESS;
++}
++
++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++                                           VLYNQ_DEV_TYPE dev_type,
++                                           unsigned int map_vector)
++{
++    volatile unsigned int * vecreg;
++    int int_vector;
++    unsigned int val=0;
++
++    /* get the int_vector from map_vector */
++    int_vector = pdev->vector_map[map_vector];
++
++    if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++        return(-1);
++
++    if(int_vector == -1) 
++        return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++    /* use the lower 8 bits of val to set the value , shift it to 
++     * appropriate byte position in the ivr and write it to the 
++     * corresponding register */
++
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /** read the information into val **/
++    val = (*vecreg) & ((VLYNQ_IVR_INTPOL_MASK << ( (int_vector %4)*8) ) );
++    
++    return (val ? (VLYNQ_INTR_ACTIVE_LOW) : (VLYNQ_INTR_ACTIVE_HIGH));
++}
++
++
++/* ----------------------------------------------------------------------------
++ *  function : vlynq_interrupt_set_type()
++ *  description:configures interrupt type .
++ */
++int vlynq_interrupt_set_type( VLYNQ_DEV *pdev,
++                                       VLYNQ_DEV_TYPE dev_type,
++                                       unsigned int map_vector,
++                                       VLYNQ_INTR_TYPE type)
++{
++    volatile unsigned int * vecreg;
++    unsigned int val=0;
++    int int_vector;
++
++    /** mask to turn off bits corresponding to interrupt type */
++    unsigned int bytemask=0x40;
++
++    /* get the int_vector from map_vector */
++    int_vector = pdev->vector_map[map_vector];
++    if(int_vector == -1) 
++        return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++    /* use the lower 8 bits of val to set the value , shift it to 
++     * appropriate byte position in the ivr and write it to the 
++     * corresponding register */
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /** val has been initialised to zero. we only have to turn on
++     * appropriate bits if need be*/
++
++     /** clear the correct byte position and then or val **/
++    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++    if( type == VLYNQ_INTR_PULSED)
++    {
++        val |= VLYNQ_IVR_INTTYPE_MASK;
++        /** write to correct byte position in vecreg*/
++        *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++    }
++
++    return VLYNQ_SUCCESS;
++}
++
++/* ----------------------------------------------------------------------------
++ *  function : vlynq_interrupt_get_type()
++ *  description:returns interrupt type .
++ */
++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, VLYNQ_DEV_TYPE dev_type,
++                                       unsigned int map_vector)
++{
++    volatile unsigned int * vecreg;
++    unsigned int val=0;
++    int int_vector;
++
++    if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++        return(-1);
++
++    /* get the int_vector from map_vector */
++    int_vector = pdev->vector_map[map_vector];
++    if(int_vector == -1) 
++        return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++    /* use the lower 8 bits of val to set the value , shift it to 
++     * appropriate byte position in the ivr and write it to the 
++     * corresponding register */
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /** Read the correct bit position into val **/
++    val = (*vecreg) & ((VLYNQ_IVR_INTTYPE_MASK << ( (int_vector %4)*8) ) );
++
++    return (val ? (VLYNQ_INTR_PULSED) : (VLYNQ_INTR_LEVEL));
++}
++
++/* ----------------------------------------------------------------------------
++ *  function : vlynq_interrupt_enable()
++ *  description:Enable interrupt by writing to IVR register.
++ */
++int vlynq_interrupt_enable( VLYNQ_DEV *pdev,
++                                     VLYNQ_DEV_TYPE dev_type,
++                                     unsigned int map_vector)
++{
++    volatile unsigned int * vecreg;
++    unsigned int val=0;
++    int int_vector;
++
++    /** mask to turn off bits corresponding to interrupt enable */
++    unsigned int bytemask=0x80;
++
++    /* get the int_vector from map_vector */
++    int_vector = pdev->vector_map[map_vector];
++    if(int_vector == -1) 
++        return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++    /* use the lower 8 bits of val to set the value , shift it to 
++     * appropriate byte position in the ivr and write it to the 
++     * corresponding register */
++
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /** val has been initialised to zero. we only have to turn on
++    *  bit corresponding to interrupt enable*/
++    val |= VLYNQ_IVR_INTEN_MASK;
++
++    /** clear the correct byte position and then or val **/
++    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++    /** write to correct byte position in vecreg*/
++    *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++    return VLYNQ_SUCCESS;
++}
++
++
++/* ----------------------------------------------------------------------------
++ *  function : vlynq_interrupt_disable()
++ *  description:Disable interrupt by writing to IVR register.
++ */
++int 
++vlynq_interrupt_disable( VLYNQ_DEV *pdev,
++                         VLYNQ_DEV_TYPE dev_type,
++                         unsigned int map_vector)
++{
++    volatile unsigned int * vecreg;
++    int int_vector;
++
++    /** mask to turn off bits corresponding to interrupt enable */
++    unsigned int bytemask=0x80;
++
++    /* get the int_vector from map_vector */
++    int_vector = pdev->vector_map[map_vector];
++    if(int_vector == -1) 
++        return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++    /* use the lower 8 bits of val to set the value , shift it to 
++     * appropriate byte position in the ivr and write it to the 
++     * corresponding register */
++    if (dev_type == VLYNQ_LOCAL_DVC)
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++    }
++    else
++    {
++        vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));  
++    }
++
++    /* We disable the interrupt by simply turning off the bit
++     * corresponding to Interrupt enable. 
++     * Clear the interrupt enable bit in the correct byte position **/
++    *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++    /* Dont have to set any bit positions */
++
++    return VLYNQ_SUCCESS;
++
++}
++
++
++
++
+diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
+--- linux.old/drivers/char/serial.c	2005-10-21 16:43:20.709226000 +0200
++++ linux.dev/drivers/char/serial.c	2005-11-10 01:10:46.015585250 +0100
+@@ -419,7 +419,40 @@
+ 	return 0;
+ }
+ 
+-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
++#if defined(CONFIG_AR7)
++
++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
++{
++	return (inb(info->port + (offset * 4)) & 0xff);  
++}
++
++
++static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++	return (inb(info->port + (offset * 4)) & 0xff);
++#else
++	return (inb_p(info->port + (offset * 4)) & 0xff);
++#endif
++}
++
++static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
++{
++	outb(value, info->port + (offset * 4));      
++}
++
++
++static _INLINE_ void serial_outp(struct async_struct *info, int offset,
++		int value)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++	outb(value, info->port + (offset * 4));
++#else
++	outb_p(value, info->port + (offset * 4));
++#endif
++}
++
++#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
+ 
+ #include <asm/mips-boards/atlas.h>
+ 
+@@ -478,8 +511,10 @@
+  * needed for certain old 386 machines, I've left these #define's
+  * in....
+  */
++#ifndef CONFIG_AR7
+ #define serial_inp(info, offset)		serial_in(info, offset)
+ #define serial_outp(info, offset, value)	serial_out(info, offset, value)
++#endif
+ 
+ 
+ /*
+@@ -1728,7 +1763,15 @@
+ 			/* Special case since 134 is really 134.5 */
+ 			quot = (2*baud_base / 269);
+ 		else if (baud)
++#ifdef CONFIG_AR7
++			quot = (CONFIG_AR7_SYS*500000) / baud;
++
++		if ((quot%16)>7)
++			quot += 8;
++		quot /=16;
++#else
+ 			quot = baud_base / baud;
++#endif
+ 	}
+ 	/* If the quotient is zero refuse the change */
+ 	if (!quot && old_termios) {
+@@ -5540,8 +5583,10 @@
+ 		state->irq = irq_cannonicalize(state->irq);
+ 		if (state->hub6)
+ 			state->io_type = SERIAL_IO_HUB6;
++#ifndef CONFIG_AR7
+ 		if (state->port && check_region(state->port,8))
+ 			continue;
++#endif
+ #ifdef CONFIG_MCA			
+ 		if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
+ 			continue;
+@@ -5997,7 +6042,15 @@
+ 	info->io_type = state->io_type;
+ 	info->iomem_base = state->iomem_base;
+ 	info->iomem_reg_shift = state->iomem_reg_shift;
++#ifdef CONFIG_AR7
++	quot = (CONFIG_AR7_SYS*500000) / baud;
++
++	if ((quot%16)>7)
++		quot += 8;
++	quot /=16;
++#else
+ 	quot = state->baud_base / baud;
++#endif
+ 	cval = cflag & (CSIZE | CSTOPB);
+ #if defined(__powerpc__) || defined(__alpha__)
+ 	cval >>= 8;
+diff -urN linux.old/drivers/char/ticfg/Makefile linux.dev/drivers/char/ticfg/Makefile
+--- linux.old/drivers/char/ticfg/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/ticfg/Makefile	2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,6 @@
++
++O_TARGET := ticfg.o
++
++obj-$(CONFIG_AR7_ADAM2) := adam2_env.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/ticfg/adam2_env.c linux.dev/drivers/char/ticfg/adam2_env.c
+--- linux.old/drivers/char/ticfg/adam2_env.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/ticfg/adam2_env.c	2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,85 @@
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++#include <linux/fcntl.h>
++#include <linux/init.h>
++
++#include <asm/ar7/adam2_env.h>
++
++#undef ADAM2_ENV_DEBUG
++
++#ifdef ADAM2_ENV_DEBUG
++#define DPRINTK(args...) do { printk(args); } while(0);
++#else
++#define DPRINTK(args...) do { } while(0);
++#endif
++
++#define ADAM2_ENV_DIR	"ticfg"
++#define ADAM2_ENV_NAME	"env"
++
++static struct proc_dir_entry *adam2_env_proc_dir;
++static struct proc_dir_entry *adam2_env_proc_ent;
++
++static int
++adam2_proc_read_env(char *page, char **start, off_t pos, int count,
++		    int *eof, void *data)
++{
++	int len;
++	t_env_var *env;
++
++	if (pos > 0)
++		return 0;
++
++	len=0;
++	for (env = prom_iterenv(0); env; env = prom_iterenv(env)) {
++		if (env->val) {
++			/* XXX check for page len */
++			len += sprintf(page + len, "%s\t%s\n",
++				       env->name, env->val);
++		}
++	}
++
++	*eof=1;
++	return len;
++}
++
++static int __init
++adam2_env_init(void)
++{
++
++	DPRINTK("%s\n", __FUNCTION__);
++
++	adam2_env_proc_dir = proc_mkdir(ADAM2_ENV_DIR, NULL);
++	if (!adam2_env_proc_dir) {
++		printk(KERN_ERR "%s: Unable to create /proc/%s entry\n",
++		       __FUNCTION__, ADAM2_ENV_DIR);
++		return -ENOMEM;
++	}
++	
++	adam2_env_proc_ent =
++		create_proc_entry(ADAM2_ENV_NAME, 0444, adam2_env_proc_dir);
++	if (!adam2_env_proc_ent) {
++		printk(KERN_ERR "%s: Unable to create /proc/%s/%s entry\n",
++		       __FUNCTION__, ADAM2_ENV_DIR, ADAM2_ENV_NAME);
++		remove_proc_entry(ADAM2_ENV_DIR, NULL);
++		return -ENOMEM;
++	}
++	adam2_env_proc_ent->read_proc = adam2_proc_read_env;
++
++	return 0;
++}
++
++static
++void __exit
++adam2_env_cleanup(void)
++{
++	remove_proc_entry(ADAM2_ENV_NAME, adam2_env_proc_dir);
++	remove_proc_entry(ADAM2_ENV_DIR, NULL);
++}
++
++module_init(adam2_env_init);
++module_exit(adam2_env_cleanup);
++
++MODULE_LICENSE("GPL");
+diff -urN linux.old/include/asm-mips/addrspace.h linux.dev/include/asm-mips/addrspace.h
+--- linux.old/include/asm-mips/addrspace.h	2002-11-29 00:53:15.000000000 +0100
++++ linux.dev/include/asm-mips/addrspace.h	2005-11-10 01:14:16.400733500 +0100
+@@ -11,6 +11,8 @@
+ #ifndef __ASM_MIPS_ADDRSPACE_H
+ #define __ASM_MIPS_ADDRSPACE_H
+ 
++#include <linux/config.h>
++
+ /*
+  *  Configure language
+  */
+@@ -102,4 +104,11 @@
+ #define XKPHYS_TO_PHYS(p)		((p) & TO_PHYS_MASK)
+ #define PHYS_TO_XKPHYS(cm,a)		(0x8000000000000000 | ((cm)<<59) | (a))
+ 
++#ifdef CONFIG_AR7_MEMORY
++#define PHYS_OFFSET	((unsigned long)(CONFIG_AR7_MEMORY))
++#else
++#define PHYS_OFFSET	(0)
++#endif
++#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
++
+ #endif /* __ASM_MIPS_ADDRSPACE_H */
+diff -urN linux.old/include/asm-mips/ar7/adam2_env.h linux.dev/include/asm-mips/ar7/adam2_env.h
+--- linux.old/include/asm-mips/ar7/adam2_env.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/adam2_env.h	2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,13 @@
++#ifndef _INCLUDE_ASM_AR7_ADAM2_ENV_H_
++#define	_INCLUDE_ASM_AR7_ADAM2_ENV_H_
++
++/* Environment variable */
++typedef struct {
++	char *name;
++	char *val;
++} t_env_var;
++
++char *prom_getenv(char *);
++t_env_var *prom_iterenv(t_env_var *);
++
++#endif /* _INCLUDE_ASM_AR7_ADAM2_ENV_H_ */
+diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h
+--- linux.old/include/asm-mips/ar7/ar7.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/ar7.h	2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,33 @@
++/*
++ * $Id$
++ * Copyright (C) $Date$  $Author$
++ * 
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ * 
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ * 
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
++ *
++ */
++
++#ifndef _AR7_H
++#define _AR7_H
++
++#include <asm/addrspace.h>
++#include <linux/config.h>
++
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(CONFIG_AR7_MEMORY))
++
++#define AR7_UART0_REGS_BASE (KSEG1ADDR(0x08610E00))
++#define AR7_UART1_REGS_BASE (KSEG1ADDR(0x08610F00))
++#define AR7_BASE_BAUD ( 3686400 / 16 )
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h
+--- linux.old/include/asm-mips/ar7/avalanche_intc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_intc.h	2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,292 @@
++ /*
++ * Nitin Dhingra, iamnd@ti.com
++ * Copyright (C) 2000 Texas Instruments Inc.
++ *
++ *
++ * ########################################################################
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Defines of the Sead board specific address-MAP, registers, etc.
++ *
++ */
++#ifndef _AVALANCHE_INTC_H
++#define _AVALANCHE_INTC_H
++
++#include <linux/config.h>
++
++/* ----- */
++
++#define KSEG1_BASE                  0xA0000000
++#define KSEG_INV_MASK               0x1FFFFFFF /* Inverted mask for kseg address */
++#define PHYS_ADDR(addr)             ((addr) & KSEG_INV_MASK)
++#define PHYS_TO_K1(addr)            (PHYS_ADDR(addr)|KSEG1_BASE)
++#define AVALANCHE_INTC_BASE PHYS_TO_K1(0x08612400)
++
++/* ----- */
++
++#define MIPS_EXCEPTION_OFFSET 8
++
++/******************************************************************************
++ Avalanche Interrupt number
++******************************************************************************/
++#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET)
++
++/*******************************************************************************
++*Linux Interrupt number
++*******************************************************************************/
++#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
++
++
++
++#define AVALANCHE_INT_END_PRIMARY      (40 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_SECONDARY    (32 + MIPS_EXCEPTION_OFFSET)
++
++#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
++
++#define AVALANCHE_INTC_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \
++			    AVINTNUM(AVALANCHE_INT_END_SECONDARY) + \
++			    MIPS_EXCEPTION_OFFSET)
++
++#if defined(CONFIG_AR7_VLYNQ)
++#define AVALANCHE_INT_END_LOW_VLYNQ  (AVALANCHE_INTC_END + 32)
++#define AVALANCHE_INT_END_VLYNQ      (AVALANCHE_INTC_END + 32 * CONFIG_AR7_VLYNQ_PORTS)
++#define AVALANCHE_INT_END             AVALANCHE_INT_END_VLYNQ
++#else
++#define AVALANCHE_INT_END             AVALANCHE_INTC_END
++#endif
++
++
++/*
++ * Avalanche interrupt controller register base (primary)
++ */
++#define AVALANCHE_ICTRL_REGS_BASE  AVALANCHE_INTC_BASE
++
++/******************************************************************************
++ * Avalanche exception controller register base (secondary)
++ ******************************************************************************/
++#define AVALANCHE_ECTRL_REGS_BASE  (AVALANCHE_ICTRL_REGS_BASE + 0x80)
++
++
++/******************************************************************************
++ *  Avalanche Interrupt pacing register base (secondary)
++ ******************************************************************************/
++#define AVALANCHE_IPACE_REGS_BASE  (AVALANCHE_ICTRL_REGS_BASE + 0xA0)
++
++
++
++/******************************************************************************
++ * Avalanche Interrupt Channel Control register base
++ *****************************************************************************/
++#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
++
++
++struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */
++{
++  volatile unsigned long intsr1;    /* Interrupt Status/Set Register 1   0x00 */
++  volatile unsigned long intsr2;    /* Interrupt Status/Set Register 2   0x04 */
++  volatile unsigned long unused1;                                      /*0x08 */
++  volatile unsigned long unused2;                                      /*0x0C */
++  volatile unsigned long intcr1;    /* Interrupt Clear Register 1        0x10 */
++  volatile unsigned long intcr2;    /* Interrupt Clear Register 2        0x14 */
++  volatile unsigned long unused3;                                      /*0x18 */
++  volatile unsigned long unused4;                                      /*0x1C */
++  volatile unsigned long intesr1;   /* Interrupt Enable (Set) Register 1 0x20 */
++  volatile unsigned long intesr2;   /* Interrupt Enable (Set) Register 2 0x24 */
++  volatile unsigned long unused5;                                      /*0x28 */
++  volatile unsigned long unused6;                                      /*0x2C */
++  volatile unsigned long intecr1;   /* Interrupt Enable Clear Register 1 0x30 */
++  volatile unsigned long intecr2;   /* Interrupt Enable Clear Register 2 0x34 */
++  volatile unsigned long unused7;                                     /* 0x38 */
++  volatile unsigned long unused8;                                     /* 0x3c */
++  volatile unsigned long pintir;    /* Priority Interrupt Index Register 0x40 */
++  volatile unsigned long intmsr;    /* Priority Interrupt Mask Index Reg 0x44 */
++  volatile unsigned long unused9;                                     /* 0x48 */
++  volatile unsigned long unused10;                                    /* 0x4C */
++  volatile unsigned long intpolr1;  /* Interrupt Polarity Mask register 10x50 */
++  volatile unsigned long intpolr2;  /* Interrupt Polarity Mask register 20x54 */
++  volatile unsigned long unused11;                                    /* 0x58 */
++  volatile unsigned long unused12;                                   /*0x5C */
++  volatile unsigned long inttypr1;  /* Interrupt Type     Mask register 10x60 */
++  volatile unsigned long inttypr2;  /* Interrupt Type     Mask register 20x64 */
++};
++
++struct avalanche_exctrl_regs   /* Avalanche Exception control registers */
++{
++  volatile unsigned long exsr;      /* Exceptions Status/Set register    0x80 */
++  volatile unsigned long reserved;                                     /*0x84 */
++  volatile unsigned long excr;      /* Exceptions Clear Register         0x88 */
++  volatile unsigned long reserved1;                                    /*0x8c */
++  volatile unsigned long exiesr;    /* Exceptions Interrupt Enable (set) 0x90 */
++  volatile unsigned long reserved2;                                    /*0x94 */
++  volatile unsigned long exiecr;    /* Exceptions Interrupt Enable(clear)0x98 */
++};
++struct avalanche_ipace_regs
++{
++
++  volatile unsigned long ipacep;    /* Interrupt pacing register         0xa0 */
++  volatile unsigned long ipacemap;  /*Interrupt Pacing Map Register      0xa4 */
++  volatile unsigned long ipacemax;  /*Interrupt Pacing Max Register      0xa8 */
++};
++struct avalanche_channel_int_number
++{
++  volatile unsigned long cintnr0;   /* Channel Interrupt Number Register0x200 */
++  volatile unsigned long cintnr1;   /* Channel Interrupt Number Register0x204 */
++  volatile unsigned long cintnr2;   /* Channel Interrupt Number Register0x208 */
++  volatile unsigned long cintnr3;   /* Channel Interrupt Number Register0x20C */
++  volatile unsigned long cintnr4;   /* Channel Interrupt Number Register0x210 */
++  volatile unsigned long cintnr5;   /* Channel Interrupt Number Register0x214 */
++  volatile unsigned long cintnr6;   /* Channel Interrupt Number Register0x218 */
++  volatile unsigned long cintnr7;   /* Channel Interrupt Number Register0x21C */
++  volatile unsigned long cintnr8;   /* Channel Interrupt Number Register0x220 */
++  volatile unsigned long cintnr9;   /* Channel Interrupt Number Register0x224 */
++  volatile unsigned long cintnr10;  /* Channel Interrupt Number Register0x228 */
++  volatile unsigned long cintnr11;  /* Channel Interrupt Number Register0x22C */
++  volatile unsigned long cintnr12;  /* Channel Interrupt Number Register0x230 */
++  volatile unsigned long cintnr13;  /* Channel Interrupt Number Register0x234 */
++  volatile unsigned long cintnr14;  /* Channel Interrupt Number Register0x238 */
++  volatile unsigned long cintnr15;  /* Channel Interrupt Number Register0x23C */
++  volatile unsigned long cintnr16;  /* Channel Interrupt Number Register0x240 */
++  volatile unsigned long cintnr17;  /* Channel Interrupt Number Register0x244 */
++  volatile unsigned long cintnr18;  /* Channel Interrupt Number Register0x248 */
++  volatile unsigned long cintnr19;  /* Channel Interrupt Number Register0x24C */
++  volatile unsigned long cintnr20;  /* Channel Interrupt Number Register0x250 */
++  volatile unsigned long cintnr21;  /* Channel Interrupt Number Register0x254 */
++  volatile unsigned long cintnr22;  /* Channel Interrupt Number Register0x358 */
++  volatile unsigned long cintnr23;  /* Channel Interrupt Number Register0x35C */
++  volatile unsigned long cintnr24;  /* Channel Interrupt Number Register0x260 */
++  volatile unsigned long cintnr25;  /* Channel Interrupt Number Register0x264 */
++  volatile unsigned long cintnr26;  /* Channel Interrupt Number Register0x268 */
++  volatile unsigned long cintnr27;  /* Channel Interrupt Number Register0x26C */
++  volatile unsigned long cintnr28;  /* Channel Interrupt Number Register0x270 */
++  volatile unsigned long cintnr29;  /* Channel Interrupt Number Register0x274 */
++  volatile unsigned long cintnr30;  /* Channel Interrupt Number Register0x278 */
++  volatile unsigned long cintnr31;  /* Channel Interrupt Number Register0x27C */
++  volatile unsigned long cintnr32;  /* Channel Interrupt Number Register0x280 */
++  volatile unsigned long cintnr33;  /* Channel Interrupt Number Register0x284 */
++  volatile unsigned long cintnr34;  /* Channel Interrupt Number Register0x288 */
++  volatile unsigned long cintnr35;  /* Channel Interrupt Number Register0x28C */
++  volatile unsigned long cintnr36;  /* Channel Interrupt Number Register0x290 */
++  volatile unsigned long cintnr37;  /* Channel Interrupt Number Register0x294 */
++  volatile unsigned long cintnr38;  /* Channel Interrupt Number Register0x298 */
++  volatile unsigned long cintnr39;  /* Channel Interrupt Number Register0x29C */
++};
++
++struct avalanche_interrupt_line_to_channel
++{
++  unsigned long int_line0;    /* Start of primary interrupts */
++  unsigned long int_line1;
++  unsigned long int_line2;
++  unsigned long int_line3;
++  unsigned long int_line4;
++  unsigned long int_line5;
++  unsigned long int_line6;
++  unsigned long int_line7;
++  unsigned long int_line8;
++  unsigned long int_line9;
++  unsigned long int_line10;
++  unsigned long int_line11;
++  unsigned long int_line12;
++  unsigned long int_line13;
++  unsigned long int_line14;
++  unsigned long int_line15;
++  unsigned long int_line16;
++  unsigned long int_line17;
++  unsigned long int_line18;
++  unsigned long int_line19;
++  unsigned long int_line20;
++  unsigned long int_line21;
++  unsigned long int_line22;
++  unsigned long int_line23;
++  unsigned long int_line24;
++  unsigned long int_line25;
++  unsigned long int_line26;
++  unsigned long int_line27;
++  unsigned long int_line28;
++  unsigned long int_line29;
++  unsigned long int_line30;
++  unsigned long int_line31;
++  unsigned long int_line32;
++  unsigned long int_line33;
++  unsigned long int_line34;
++  unsigned long int_line35;
++  unsigned long int_line36;
++  unsigned long int_line37;
++  unsigned long int_line38;
++  unsigned long int_line39;
++};
++
++
++/* Interrupt Line #'s  (Sangam peripherals) */
++
++/*------------------------------*/
++/* Sangam primary interrupts */
++/*------------------------------*/
++
++#define UNIFIED_SECONDARY_INTERRUPT  0
++#define AVALANCHE_EXT_INT_0          1
++#define AVALANCHE_EXT_INT_1          2
++/*  Line #3  Reserved               */
++/*  Line #4  Reserved               */
++#define AVALANCHE_TIMER_0_INT        5
++#define AVALANCHE_TIMER_1_INT        6
++#define AVALANCHE_UART0_INT          7
++#define AVALANCHE_UART1_INT          8
++#define AVALANCHE_PDMA_INT0          9
++#define AVALANCHE_PDMA_INT1          10
++/*  Line #11  Reserved               */
++/*  Line #12  Reserved               */
++/*  Line #13  Reserved               */
++/*  Line #14  Reserved               */
++#define AVALANCHE_ATM_SAR_INT        15
++/*  Line #16  Reserved               */
++/*  Line #17  Reserved               */
++/*  Line #18  Reserved               */
++#define AVALANCHE_MAC0_INT           19
++/*  Line #20  Reserved               */
++#define AVALANCHE_VLYNQ0_INT         21
++#define AVALANCHE_CODEC_WAKE_INT     22
++/*  Line #23  Reserved               */
++#define AVALANCHE_USB_INT            24
++#define AVALANCHE_VLYNQ1_INT         25
++/*  Line #26  Reserved               */
++/*  Line #27  Reserved               */
++#define AVALANCHE_MAC1_INT           28
++#define AVALANCHE_I2CM_INT           29
++#define AVALANCHE_PDMA_INT2          30
++#define AVALANCHE_PDMA_INT3          31
++/*  Line #32  Reserved               */
++/*  Line #33  Reserved               */
++/*  Line #34  Reserved               */
++/*  Line #35  Reserved               */
++/*  Line #36  Reserved               */
++#define AVALANCHE_VDMA_VT_RX_INT     37
++#define AVALANCHE_VDMA_VT_TX_INT     38
++#define AVALANCHE_ADSLSS_INT         39
++
++/*-----------------------------------*/
++/* Sangam Secondary Interrupts    */
++/*-----------------------------------*/
++#define PRIMARY_INTS                 40
++
++#define EMIF_INT                    (7 + PRIMARY_INTS)
++
++
++extern void avalanche_int_set(int channel, int line);
++
++
++#endif /* _AVALANCHE_INTC_H */
+diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h
+--- linux.old/include/asm-mips/ar7/avalanche_misc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_misc.h	2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,174 @@
++#ifndef _AVALANCHE_MISC_H_
++#define _AVALANCHE_MISC_H_
++
++typedef enum AVALANCHE_ERR_t
++{
++    AVALANCHE_ERR_OK        = 0,    /* OK or SUCCESS */
++    AVALANCHE_ERR_ERROR     = -1,   /* Unspecified/Generic ERROR */
++
++    /* Pointers and args */
++    AVALANCHE_ERR_INVARG        = -2,   /* Invaild argument to the call */
++    AVALANCHE_ERR_NULLPTR       = -3,   /* NULL pointer */
++    AVALANCHE_ERR_BADPTR        = -4,   /* Bad (out of mem) pointer */
++
++    /* Memory issues */
++    AVALANCHE_ERR_ALLOC_FAIL    = -10,  /* allocation failed */
++    AVALANCHE_ERR_FREE_FAIL     = -11,  /* free failed */
++    AVALANCHE_ERR_MEM_CORRUPT   = -12,  /* corrupted memory */
++    AVALANCHE_ERR_BUF_LINK      = -13,  /* buffer linking failed */
++
++    /* Device issues */
++    AVALANCHE_ERR_DEVICE_TIMEOUT    = -20,  /* device timeout on read/write */
++    AVALANCHE_ERR_DEVICE_MALFUNC    = -21,  /* device malfunction */
++
++    AVALANCHE_ERR_INVID     = -30   /* Invalid ID */
++
++} AVALANCHE_ERR;
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++typedef enum AVALANCHE_RESET_MODULE_tag
++{
++    RESET_MODULE_UART0      = 0,
++    RESET_MODULE_UART1      = 1,
++    RESET_MODULE_I2C        = 2,
++    RESET_MODULE_TIMER0     = 3,
++    RESET_MODULE_TIMER1     = 4,
++    RESET_MODULE_GPIO       = 6,
++    RESET_MODULE_ADSLSS     = 7,
++    RESET_MODULE_USBS       = 8,
++    RESET_MODULE_SAR        = 9,
++    RESET_MODULE_VDMA_VT    = 11,
++    RESET_MODULE_FSER       = 12,
++    RESET_MODULE_VLYNQ1     = 16,
++    RESET_MODULE_EMAC0      = 17,
++    RESET_MODULE_DMA        = 18,
++    RESET_MODULE_BIST       = 19,
++    RESET_MODULE_VLYNQ0     = 20,
++    RESET_MODULE_EMAC1      = 21,
++    RESET_MODULE_MDIO       = 22,
++    RESET_MODULE_ADSLSS_DSP = 23,
++    RESET_MODULE_EPHY       = 26
++} AVALANCHE_RESET_MODULE_T;
++
++typedef enum AVALANCHE_RESET_CTRL_tag
++{
++    IN_RESET        = 0,
++    OUT_OF_RESET
++} AVALANCHE_RESET_CTRL_T;
++
++typedef enum AVALANCHE_SYS_RST_MODE_tag
++{
++    RESET_SOC_WITH_MEMCTRL      = 1,    /* SW0 bit in SWRCR register */
++    RESET_SOC_WITHOUT_MEMCTRL   = 2     /* SW1 bit in SWRCR register */
++} AVALANCHE_SYS_RST_MODE_T;
++
++typedef enum AVALANCHE_SYS_RESET_STATUS_tag
++{
++    HARDWARE_RESET = 0,
++    SOFTWARE_RESET0,            /* Caused by writing 1 to SW0 bit in SWRCR register */
++    WATCHDOG_RESET,
++    SOFTWARE_RESET1             /* Caused by writing 1 to SW1 bit in SWRCR register */
++} AVALANCHE_SYS_RESET_STATUS_T;
++
++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(AVALANCHE_RESET_MODULE_T reset_module);
++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode);
++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status(void);
++
++typedef int (*REMOTE_VLYNQ_DEV_RESET_CTRL_FN)(unsigned int reset_module, AVALANCHE_RESET_CTRL_T reset_ctrl);
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++
++typedef enum AVALANCHE_POWER_CTRL_tag
++{
++    POWER_CTRL_POWER_UP = 0,
++    POWER_CTRL_POWER_DOWN
++} AVALANCHE_POWER_CTRL_T;
++
++typedef enum AVALANCHE_SYS_POWER_MODE_tag
++{
++    GLOBAL_POWER_MODE_RUN       = 0,    /* All system is up */
++    GLOBAL_POWER_MODE_IDLE,             /* MIPS is power down, all peripherals working */
++    GLOBAL_POWER_MODE_STANDBY,          /* Chip in power down, but clock to ADSKL subsystem is running */
++    GLOBAL_POWER_MODE_POWER_DOWN        /* Total chip is powered down */
++} AVALANCHE_SYS_POWER_MODE_T;
++
++void avalanche_power_ctrl(unsigned int power_module,  AVALANCHE_POWER_CTRL_T power_ctrl);
++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int power_module);
++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode);
++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void);
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++typedef enum AVALANCHE_WAKEUP_INTERRUPT_tag
++{
++    WAKEUP_INT0 = 1,
++    WAKEUP_INT1 = 2,
++    WAKEUP_INT2 = 4,
++    WAKEUP_INT3 = 8
++} AVALANCHE_WAKEUP_INTERRUPT_T;
++
++typedef enum TNETV1050_WAKEUP_CTRL_tag
++{
++    WAKEUP_DISABLED = 0,
++    WAKEUP_ENABLED
++} AVALANCHE_WAKEUP_CTRL_T;
++
++typedef enum TNETV1050_WAKEUP_POLARITY_tag
++{
++    WAKEUP_ACTIVE_HIGH = 0,
++    WAKEUP_ACTIVE_LOW
++} AVALANCHE_WAKEUP_POLARITY_T;
++
++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
++                           AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
++                           AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity);
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++typedef enum AVALANCHE_GPIO_PIN_MODE_tag
++{
++    FUNCTIONAL_PIN = 0,
++    GPIO_PIN = 1
++} AVALANCHE_GPIO_PIN_MODE_T;
++
++typedef enum AVALANCHE_GPIO_PIN_DIRECTION_tag
++{
++    GPIO_OUTPUT_PIN = 0,
++    GPIO_INPUT_PIN = 1
++} AVALANCHE_GPIO_PIN_DIRECTION_T;
++
++typedef enum { GPIO_FALSE, GPIO_TRUE } AVALANCHE_GPIO_BOOL_T;
++
++void avalanche_gpio_init(void);
++int avalanche_gpio_ctrl(unsigned int gpio_pin,
++                         AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++                         AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
++int avalanche_gpio_ctrl_with_link_count(unsigned int gpio_pin,
++                         AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++                         AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value);
++int avalanche_gpio_in_bit(unsigned int gpio_pin);
++int avalanche_gpio_out_value(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
++int avalanche_gpio_out_value_with_link_count(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
++int avalanche_gpio_in_value(unsigned int *in_val, unsigned int reg_index);
++
++unsigned int avalanche_get_chip_version_info(void);
++
++unsigned int avalanche_get_vbus_freq(void);
++void         avalanche_set_vbus_freq(unsigned int);
++
++
++typedef int (*SET_MDIX_ON_CHIP_FN_T)(unsigned int base_addr, unsigned int operation);
++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation);
++unsigned int avalanche_is_mdix_on_chip(void);
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h
+--- linux.old/include/asm-mips/ar7/avalanche_regs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_regs.h	2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,567 @@
++/* 
++ *  $Id$
++ *  Avalanche Register Descriptions
++ *
++ *  Jeff Harrell, jharrell@ti.com
++ *  2000 (c) Texas Instruments Inc.
++ */
++
++#ifndef __AVALANCHE_REGS_H
++#define __AVALANCHE_REGS_H
++
++#include <asm/addrspace.h>
++#include <linux/config.h>
++
++/*----------------------------------------*/
++/* Base offsets within the Avalanche ASIC */
++/*----------------------------------------*/
++
++#define BBIF_SPACE0     (KSEG1ADDR(0x01000000))
++#define BBIF_SPACE1     (KSEG1ADDR(0x01800000))
++#define BBIF_CONTROL    (KSEG1ADDR(0x02000000))
++#define ATM_SAR_BASE    (KSEG1ADDR(0x03000000))
++#define USB_MCU_BASE    (KSEG1ADDR(0x03400000))
++#define DES_BASE        (KSEG1ADDR(0x08600000))
++#define ETH_MACA_BASE   (KSEG1ADDR(0x08610000))
++#define ETH_MACB_BASE   (KSEG1ADDR(0x08612800))
++#define MEM_CTRLR_BASE  (KSEG1ADDR(0x08610800))
++#define GPIO_BASE       (KSEG1ADDR(0x08610900))
++#define CLK_CTRL_BASE   (KSEG1ADDR(0x08610A00))
++#define WATCH_DOG_BASE  (KSEG1ADDR(0x08610B00))
++#define TMR1_BASE       (KSEG1ADDR(0x08610C00))
++#define TRM2_BASE       (KSEG1ADDR(0x08610D00))
++#define UARTA_BASE      (KSEG1ADDR(0x08610E00))
++#define UARTB_BASE      (KSEG1ADDR(0x08610F00))
++#define I2C_BASE        (KSEG1ADDR(0x08611000))
++#define DEV_ID_BASE     (KSEG1ADDR(0x08611100))
++#define USB_BASE        (KSEG1ADDR(0x08611200))
++#define PCI_CONFIG_BASE (KSEG1ADDR(0x08611300))
++#define DMA_BASE        (KSEG1ADDR(0x08611400))
++#define RESET_CTRL_BASE (KSEG1ADDR(0x08611600))
++#define DSL_IF_BASE     (KSEG1ADDR(0x08611B00))
++#define INT_CTL_BASE    (KSEG1ADDR(0x08612400)) 
++#define PHY_BASE        (KSEG1ADDR(0x1E000000))
++
++/*---------------------------------*/
++/* Device ID, chip version number  */
++/*---------------------------------*/
++
++#define AVALANCHE_CHVN  (*(volatile unsigned int *)(DEV_ID_BASE+0x14))
++#define AVALANCHE_DEVID1 (*(volatile unsigned int *)(DEV_ID_BASE+0x18))
++#define AVALANCHE_DEVID2 (*(volatile unsigned int *)(DEV_ID_BASE+0x1C))
++
++/*----------------------------------*/
++/* Reset Control VW changed to ptrs */
++/*----------------------------------*/
++
++#define AVALANCHE_PRCR  (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x0))  /* Peripheral reset control */
++#define AVALANCHE_SWRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x4))  /* Software reset control   */
++#define AVALANCHE_RSR   (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x8))  /* Reset status register    */
++
++/* reset control bits */
++
++#define AV_RST_UART0    (1<<0)    /* Brings UART0 out of reset              */
++#define AV_RST_UART1    (1<<1)    /* Brings UART1 out of reset              */
++#define AV_RST_IICM     (1<<2)    /* Brings the I2CM out of reset           */
++#define AV_RST_TIMER0   (1<<3)    /* Brings Timer 0 out of reset            */
++#define AV_RST_TIMER1   (1<<4)    /* Brings Timer 1 out of reset            */
++#define AV_RST_DES      (1<<5)    /* Brings the DES module out of reset     */
++#define AV_RST_GPIO     (1<<6)    /* Brings the GPIO module out of reset (see note below) */
++/*
++  JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++       If you reset the GPIO interface all of the directions (i/o) of the UART B
++       interface pins are inputs and must be reconfigured so as not to lose the 
++       serial console interface
++  JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++*/
++#define AV_RST_BBIF     (1<<7)    /* Brings the Broadband interface out of reset */
++#define AV_RST_USB      (1<<8)    /* Brings the USB module out of reset     */
++#define AV_RST_SAR      (1<<9)    /* Brings the SAR out of reset            */
++#define AV_RST_HDLC     (1<<10)   /* Brings the HDLC module out of reset    */
++#define AV_RST_PCI      (1<<16)   /* Brings the PCI module out of reset     */
++#define AV_RST_ETH_MAC0 (1<<17)   /* Brings the Ethernet MAC0 out of reset  */
++#define AV_RST_PICO_DMA (1<<18)   /* Brings the PICO DMA module out of reset */
++#define AV_RST_BIST     (1<<19)   /* Brings the BIST module out of reset    */
++#define AV_RST_DSP      (1<<20)   /* Brings the DSP sub system out of reset */
++#define AV_RST_ETH_MAC1 (1<<21)   /* Brings the Ethernet MAC1 out of reset  */
++
++/*----------------------*/
++/* Physical interfaces  */
++/*----------------------*/
++
++/* Phy loopback */
++#define PHY_LOOPBACK    1
++
++
++/* Phy 0 */
++#define PHY0BASE        (PHY_BASE)
++#define PHY0RST         (*(volatile unsigned char *) (PHY0BASE))      /* reset   */
++#define PHY0CTRL        (*(volatile unsigned char *) (PHY0BASE+0x5))  /* control */
++#define PHY0RACPCTRL    (*(volatile unsigned char *) (PHY0BASE+0x50)) /* RACP control/status */ 
++#define PHY0TACPCTRL    (*(volatile unsigned char *) (PHY0BASE+0x60)) /* TACP idle/unassigned cell hdr */
++#define PHY0RACPINT     (*(volatile unsigned char *) (PHY0BASE+0x51)) /* RACP interrupt enable/Status */
++
++
++/* Phy 1 */
++
++#define PHY1BASE        (PHY_BASE + 0x100000)
++#define PHY1RST         (*(volatile unsigned char *) (PHY1BASE))      /* reset   */
++#define PHY1CTRL        (*(volatile unsigned char *) (PHY1BASE+0x5))  /* control */
++#define PHY1RACPCTRL    (*(volatile unsigned char *) (PHY1BASE+0x50)) 
++#define PHY1TACPCTRL    (*(volatile unsigned char *) (PHY1BASE+0x60)) 
++#define PHY1RACPINT     (*(volatile unsigned char *) (PHY1BASE+0x51)) 
++
++/* Phy 2 */
++
++#define PHY2BASE        (PHY_BASE + 0x200000)
++#define PHY2RST         (*(volatile unsigned char *) (PHY2BASE))      /* reset   */
++#define PHY2CTRL        (*(volatile unsigned char *) (PHY2BASE+0x5))  /* control */
++#define PHY2RACPCTRL    (*(volatile unsigned char *) (PHY2BASE+0x50)) 
++#define PHY2TACPCTRL    (*(volatile unsigned char *) (PHY2BASE+0x60)) 
++#define PHY2RACPINT     (*(volatile unsigned char *) (PHY2BASE+0x51)) 
++
++/*-------------------*/
++/* Avalanche ATM SAR */
++/*-------------------*/
++
++#define AVSAR_SYSCONFIG    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000000)) /* SAR system config register    */
++#define AVSAR_SYSSTATUS    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000004)) /* SAR system status register    */
++#define AVSAR_INT_ENABLE   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000008)) /* SAR interrupt enable register */
++#define AVSAR_CONN_VPI_VCI (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000000c)) /* VPI/VCI connection config     */
++#define AVSAR_CONN_CONFIG  (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000010)) /* Connection config register    */
++#define AVSAR_OAM_CONFIG   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018)) /* OAM configuration register    */
++
++/* Transmit completion ring registers */
++
++#define AVSAR_TCRAPTR       (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000100))
++#define AVSAR_TCRASIZE      (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000104))
++#define AVSAR_TCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000108))
++#define AVSAR_TCRATOTENT    (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000010c))
++#define AVSAR_TCRAFREEENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000110))
++#define AVSAR_TCRAPENDENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000114))
++#define AVSAR_TCRAENTINC    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000118))
++#define AVSAR_TCRBPTR       (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000011c))
++#define AVSAR_TCRBSIZE      (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000120))
++#define AVSAR_TCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000124))
++#define AVSAR_TCRBTOTENT    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000128))
++#define AVSAR_TCRBFREEENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000012c))
++#define AVSAR_TCRBPENDENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000130))
++#define AVSAR_TCRBENTINC    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000134))
++
++/* Transmit Queue Packet registers */
++#define AVSAR_TXQUEUE_PKT0  (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000140))
++#define AVSAR_TXQUEUE_PKT1  (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000144))
++#define AVSAR_TXQUEUE_PKT2  (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000148))
++#define AVSAR_TX_FLUSH      (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000014C))
++/* Receive completion ring registers */
++
++#define AVSAR_RCRAPTR       (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000200))
++#define AVSAR_RCRASIZE      (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000204))
++#define AVSAR_RCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000208))
++#define AVSAR_RCRATOTENT    (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000020c))
++#define AVSAR_RCRAFREEENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000210))
++#define AVSAR_RCRAPENDENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000214))
++#define AVSAR_RCRAENTINC    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000218))
++#define AVSAR_RCRBPTR       (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000021c))
++#define AVSAR_RCRBSIZE      (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000220))
++#define AVSAR_RCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000224))
++#define AVSAR_RCRBTOTENT    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000228))
++#define AVSAR_RCRBFREEENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000022c))
++#define AVSAR_RCRBPENDENT   (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000230))
++#define AVSAR_RCRBENTINC    (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000234))
++
++#define AVSAR_RXFBL_ADD0    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000240)) /* Rx Free buffer list add 0  */
++#define AVSAR_RXFBL_ADD1    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000244)) /* Rx Free buffer list add 1  */
++#define AVSAR_RXFBL_ADD2    (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000248)) /* Rx Free buffer list add 2  */
++#define AVSAR_RXFBLSIZE_0   (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000028c)) /* Rx Free buffer list size 0 */
++#define AVSAR_RXFBLSIZE_1   (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000029c)) /* Rx Free buffer list size 1 */
++#define AVSAR_RXFBLSIZE_2   (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002ac)) /* Rx Free buffer list size 2 */
++#define AVSAR_RXFBLSIZE_3   (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002bc)) /* Rx Free buffer list size 3 */
++
++
++#if defined(CONFIG_MIPS_EVM3D) || defined(CONFIG_MIPS_AR5D01) || defined(CONFIG_MIPS_AR5W01)
++
++#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010480))
++#define AVSAR_OAM_CC_SINK   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010484))
++#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010488))
++#define AVSAR_OAM_CPID0      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E0))
++#define AVSAR_OAM_LLID0      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F0))
++#define AVSAR_OAM_CPID1      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E4))
++#define AVSAR_OAM_LLID1      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F4))
++#define AVSAR_OAM_CPID2      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E8))
++#define AVSAR_OAM_LLID2      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F8))
++#define AVSAR_OAM_CPID3      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104EC))
++#define AVSAR_OAM_LLID3      (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104FC))
++#define AVSAR_OAM_CORR_TAG      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010500))
++#define AVSAR_OAM_FAR_COUNT      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010520))
++#define AVSAR_OAM_NEAR_COUNT      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010540))
++#define AVSAR_OAM_CONFIG_REG      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018))
++#define AVSAR_FAIRNESS_REG   (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104B8))
++#define AVSAR_UBR_PCR_REG   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010490))
++
++
++/*
++
++#define OAM_CPID_ADD  0xa30104e0
++
++#define OAM_LLID_ADD  0xa30104f0
++
++#define OAM_LLID_VAL  0xffffffff
++
++#define OAM_CORR_TAG  0xa3010500
++
++#define OAM_FAR_COUNT_ADD 0xa3010520
++
++#define OAM_NEAR_COUNT_ADD 0xa3010540
++
++#define OAM_CONFIG_REG_ADD 0xa3000018
++*/
++
++
++#else /* CONFIG_MIPS_EVM3 || CONFIG_MIPS_ACPEP */
++
++#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012000))
++#define AVSAR_OAM_CC_SINK   (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012004))
++#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012008))
++#define AVSAR_OAM_CPID      (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012300))
++
++#endif /* CONFIG_MIPS_EVM3D || CONFIG_MIPS_AR5D01 || CONFIG_MIPS_AR5W01 */
++
++
++#define AVSAR_STATE_RAM     (ATM_SAR_BASE + 0x010000) /* SAR state RAM */
++#define AVSAR_PDSP_BASE     (ATM_SAR_BASE + 0x020000) /* SAR PDSP base address   */
++#define AVSAR_TXDMA_BASE    (ATM_SAR_BASE + 0x030000) /* Transmit DMA state base */ 
++#define AVSAR_TDMASTATE6    0x18                      /* Transmit DMA state word 6 */
++#define AVSAR_RXDMA_BASE    (ATM_SAR_BASE + 0x040000) /* Receive  DMA state base */
++#define AVSAR_RDMASTATE0    0x0                       /* Receive  DMA state word 0 */
++
++/*------------------------------------------*/
++/* DSL Interface                            */
++/*------------------------------------------*/
++
++#define AVDSL_TX_EN          (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000000))
++#define AVDSL_RX_EN          (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000004))
++#define AVDSL_POLL           (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000008))
++
++/* Fast */
++
++#define AVDSL_TX_FIFO_ADDR0  (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000000C))
++#define AVDSL_TX_FIFO_BASE0  (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000010))
++#define AVDSL_TX_FIFO_LEN0   (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000014))
++#define AVDSL_TX_FIFO_PR0    (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000018))
++#define AVDSL_RX_FIFO_ADDR0  (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000001C))
++#define AVDSL_RX_FIFO_BASE0  (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000020))
++#define AVDSL_RX_FIFO_LEN0   (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000024))
++#define AVDSL_RX_FIFO_PR0    (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000028))
++
++/* Interleaved */
++
++#define AVDSL_TX_FIFO_ADDR1  (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000002C))
++#define AVDSL_TX_FIFO_BASE1  (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000030))
++#define AVDSL_TX_FIFO_LEN1   (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000034))
++#define AVDSL_TX_FIFO_PR1    (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000038))
++#define AVDSL_RX_FIFO_ADDR1  (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000003C))
++#define AVDSL_RX_FIFO_BASE1  (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000040))
++#define AVDSL_RX_FIFO_LEN1   (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000044))
++#define AVDSL_RX_FIFO_PR1    (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000048))
++
++/*------------------------------------------*/
++/* Broadband I/F                            */
++/*------------------------------------------*/
++
++#define AVBBIF_BBIF_CNTRL    (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000000))
++#define AVBBIF_ADDR_TRANS_0  (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000004))
++#define AVBBIF_ADDR_TRANS_1  (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000008))
++#define AVBBIF_ADDR_XB_MX_BL (*(volatile unsigned int *)(BBIF_CONTROL + 0x0000000C))
++#define AVBBIF_INFIFO_LVL    (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000010))
++#define AVBBIF_OUTFIFO_LVL   (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000014))
++
++#define AVBBIF_DISABLED    0x0
++#define AVBBIF_LBT4040_INT 0x1
++#define AVBBIF_XBUS        0x2
++#define AVBBIF_LBT4040_EXT 0x4
++
++#define AVBBIF_ADDR_MASK0   0xff000000 /* handles upper bits of BBIF 0 address */
++#define AVBBIF_ADDR_MASK1   0xff800000 /* handles upper bits of BBIF 1 address */
++#define AVBBIF_TRANS_MASK   0xff000000
++/*------------------------------------------*/
++/* GPIO I/F                                 */
++/*------------------------------------------*/
++
++#define GPIO_DATA_INPUT      (*(volatile unsigned int *)(GPIO_BASE + 0x00000000))
++#define GPIO_DATA_OUTPUT     (*(volatile unsigned int *)(GPIO_BASE + 0x00000004))
++#define GPIO_DATA_DIR        (*(volatile unsigned int *)(GPIO_BASE + 0x00000008)) /* 0=output 1=input  */
++#define GPIO_DATA_ENABLE     (*(volatile unsigned int *)(GPIO_BASE + 0x0000000C)) /* 0=GPIO Mux 1=GPIO */
++
++#define GPIO_0 (1<<21)
++#define GPIO_1 (1<<22)
++#define GPIO_2 (1<<23)
++#define GPIO_3 (1<<24)
++#define EINT_1 (1<<18)
++
++/*
++  JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++       If you reset the GPIO interface all of the directions (i/o) of the UART B
++       interface pins are inputs and must be reconfigured so as not to lose the 
++       serial console interface
++  JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++*/
++
++/*------------------------------------------*/
++/* CLK_CTRL                                 */
++/*------------------------------------------*/
++#define PERIPH_CLK_CTL       (*(volatile unsigned int *)(CLK_CTRL_BASE + 0x00000004))
++
++#define PCLK_0_HALF_VBUS     (0<<16)
++#define PCLK_EQ_INPUT        (1<<16)
++#define BBIF_CLK_HALF_VBUS   (0<<17)
++#define BBIF_CLK_EQ_VBUS     (1<<17)
++#define BBIF_CLK_EQ_BBCLK    (3<<17)
++#define DSP_MODCLK_DSPCLKI   (0<<20)
++#define DSP_MODCLK_REFCLKI   (1<<20)
++#define USB_CLK_EQ_USBCLKI   (0<<21)
++#define USB_CLK_EQ_REFCLKI   (1<<21)
++
++/*------------------------------------------*/
++/* PCI Control Registers                    */
++/*------------------------------------------*/
++#define	PCIC_CONTROL		(*(volatile unsigned int *)(PCI_CONFIG_BASE))
++#define		PCIC_CONTROL_CFG_DONE				(1<<0)
++#define		PCIC_CONTROL_DIS_SLAVE_TO			(1<<1)
++#define		PCIC_CONTROL_FORCE_DELAY_READ		(1<<2)
++#define		PCIC_CONTROL_FORCE_DELAY_READ_LINE	(1<<3)
++#define		PCIC_CONTROL_FORCE_DELAY_READ_MULT	(1<<4)
++#define		PCIC_CONTROL_MEM_SPACE_EN			(1<<5)
++#define		PCIC_CONTROL_MEM_MASK				(1<<6)
++#define		PCIC_CONTROL_IO_SPACE_EN			(1<<7)
++#define		PCIC_CONTROL_IO_MASK				(1<<8)
++/*			PCIC_CONTROL_RESERVED				(1<<9)	*/
++#define		PCIC_CONTROL_BASE0_EN				(1<<10)
++#define		PCIC_CONTROL_BASE1_EN				(1<<11)
++#define		PCIC_CONTROL_BASE2_EN				(1<<12)
++#define		PCIC_CONTROL_HOLD_MASTER_WRITE		(1<<13)
++#define		PCIC_CONTROL_ARBITER_EN				(1<<14)
++#define	PCIC_INT_SOURCE		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000004))
++#define		PCIC_INT_SOURCE_PWR_MGMT			(1<<0)
++#define		PCIC_INT_SOURCE_PCI_TARGET			(1<<1)
++#define		PCIC_INT_SOURCE_PCI_MASTER			(1<<2)
++#define		PCIC_INT_SOURCE_POWER_WAKEUP		(1<<3)
++#define		PCIC_INT_SOURCE_PMEIN				(1<<4)
++/*			PCIC_INT_SOURCE_RESERVED			(1<<5) */
++/*			PCIC_INT_SOURCE_RESERVED			(1<<6) */
++#define		PCIC_INT_SOURCE_PIC_INTA			(1<<7)
++#define		PCIC_INT_SOURCE_PIC_INTB			(1<<8)
++#define		PCIC_INT_SOURCE_PIC_INTC			(1<<9)
++#define		PCIC_INT_SOURCE_PIC_INTD			(1<<10)
++#define		PCIC_INT_SOURCE_SOFT_INT0			(1<<11)
++#define		PCIC_INT_SOURCE_SOFT_INT1			(1<<12)
++#define		PCIC_INT_SOURCE_SOFT_INT2			(1<<13)
++#define		PCIC_INT_SOURCE_SOFT_INT3			(1<<14)
++#define	PCIC_INT_CLEAR		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000008))
++#define		PCIC_INT_CLEAR_PM					(1<<0)
++#define		PCIC_INT_CLEAR_PCI_TARGET			(1<<1)
++#define		PCIC_INT_CLEAR_PCI_MASTER			(1<<2)
++/*			PCIC_INT_CLEAR_RESERVED				(1<<3)	*/
++#define		PCIC_INT_CLEAR_PMEIN				(1<<4)
++/*			PCIC_INT_CLEAR_RESERVED				(1<<5)	*/
++/*			PCIC_INT_CLEAR_RESERVED				(1<<6)	*/
++#define		PCIC_INT_CLEAR_PCI_INTA				(1<<7)
++#define		PCIC_INT_CLEAR_PCI_INTB				(1<<8)
++#define		PCIC_INT_CLEAR_PCI_INTC				(1<<9)
++#define		PCIC_INT_CLEAR_PCI_INTD				(1<<10)
++#define		PCIC_INT_CLEAR_SOFT_INT0			(1<<11)
++#define		PCIC_INT_CLEAR_SOFT_INT1			(1<<12)
++#define		PCIC_INT_CLEAR_SOFT_INT2			(1<<13)
++#define		PCIC_INT_CLEAR_SOFT_INT3			(1<<14)
++#define	PCIC_INT_EN_AVAL	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000000c))
++#define		PCIC_INT_EN_AVAL_PM					(1<<0)
++#define		PCIC_INT_EN_AVAL_PCI_TARGET			(1<<1)
++#define		PCIC_INT_EN_AVAL_PCI_MASTER			(1<<2)
++/*			PCIC_INT_EN_AVAL_RESERVED			(1<<3)	*/
++#define		PCIC_INT_EN_AVAL_PMEIN				(1<<4)
++/*			PCIC_INT_EN_AVAL_RESERVED			(1<<5)	*/
++/*			PCIC_INT_EN_AVAL_RESERVED			(1<<6)	*/
++#define		PCIC_INT_EN_AVAL_PCI_INTA			(1<<7)
++#define		PCIC_INT_EN_AVAL_PCI_INTB			(1<<8)
++#define		PCIC_INT_EN_AVAL_PCI_INTC			(1<<9)
++#define		PCIC_INT_EN_AVAL_PCI_INTD			(1<<10)
++#define		PCIC_INT_EN_AVAL_SOFT_INT0			(1<<11)
++#define		PCIC_INT_EN_AVAL_SOFT_INT1			(1<<12)
++#define		PCIC_INT_EN_AVAL_SOFT_INT2			(1<<13)
++#define		PCIC_INT_EN_AVAL_SOFT_INT3			(1<<14)
++#define	PCIC_INT_EN_PCI			(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000010))
++#define		PCIC_INT_EN_PCI_PM					(1<<0)
++#define		PCIC_INT_EN_PCI_PCI_TARGET			(1<<1)
++#define		PCIC_INT_EN_PCI_PCI_MASTER			(1<<2)
++/*			PCIC_INT_EN_PCI_RESERVED			(1<<3)	*/
++#define		PCIC_INT_EN_PCI_PMEIN				(1<<4)
++/*			PCIC_INT_EN_PCI_RESERVED			(1<<5)	*/
++/*			PCIC_INT_EN_PCI_RESERVED			(1<<6)	*/
++#define		PCIC_INT_EN_PCI_PCI_INTA			(1<<7)
++#define		PCIC_INT_EN_PCI_PCI_INTB			(1<<8)
++#define		PCIC_INT_EN_PCI_PCI_INTC			(1<<9)
++#define		PCIC_INT_EN_PCI_PCI_INTD			(1<<10)
++#define		PCIC_INT_EN_PCI_SOFT_INT0			(1<<11)
++#define		PCIC_INT_EN_PCI_SOFT_INT1			(1<<12)
++#define		PCIC_INT_EN_PCI_SOFT_INT2			(1<<13)
++#define		PCIC_INT_EN_PCI_SOFT_INT3			(1<<14)
++#define	PCIC_INT_SWSET		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000014))
++#define		PCIC_INT_SWSET_SOFT_INT0			(1<<0)
++#define		PCIC_INT_SWSET_SOFT_INT1			(1<<1)
++#define		PCIC_INT_SWSET_SOFT_INT2			(1<<2)
++#define		PCIC_INT_SWSET_SOFT_INT3			(1<<3)
++#define	PCIC_PM_CTL			(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000018))
++#define		PCIC_PM_CTL_PWR_STATE_MASK			(0x02)
++/*			PCIC_PM_CTL_RESERVED				(1<<2) */
++/*			PCIC_PM_CTL_RESERVED				(1<<3) */
++/*			PCIC_PM_CTL_RESERVED				(1<<4) */
++/*			PCIC_PM_CTL_RESERVED				(1<<5) */
++/*			PCIC_PM_CTL_RESERVED				(1<<6) */
++/*			PCIC_PM_CTL_RESERVED				(1<<7) */
++/*			PCIC_PM_CTL_RESERVED				(1<<8) */
++/*			PCIC_PM_CTL_RESERVED				(1<<9) */
++#define		PCIC_PM_CTL_PWR_SUPPORT				(1<<10)
++#define		PCIC_PM_CTL_PMEIN					(1<<11)
++#define		PCIC_PM_CTL_CAP_MASK	(*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x0000001a))
++#define	PCIC_PM_CONSUME		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000001c))
++#define		PCIC_PM_CONSUME_D0		(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001c))
++#define		PCIC_PM_CONSUME_D1		(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001d))
++#define		PCIC_PM_CONSUME_D2		(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001e))
++#define		PCIC_PM_CONSUME_D3		(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001f))
++#define	PCIC_PM_DISSAPATED	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000020))
++#define		PCIC_PM_DISSAPATED_D0	(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000020))
++#define		PCIC_PM_DISSAPATED_D1	(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000021))
++#define		PCIC_PM_DISSAPATED_D2	(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000022))
++#define		PCIC_PM_DISSAPATED_D3	(*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000023))
++#define	PCIC_PM_DATA_SCALE	(*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x00000024))
++#define	PCIC_VEND_DEV_ID	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000028))
++#define	PCIC_SUB_VEND_DEV_ID	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000002c))
++#define	PCIC_CLASS_REV_ID	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000030))
++#define	PCIC_MAX_MIN		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000034))
++#define	PCIC_MAST_MEM_AT0	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000003c))
++#define	PCIC_MAST_MEM_AT1	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000040))
++#define	PCIC_MAST_MEM_AT2	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000044))
++#define	PCIC_SLAVE_MASK0	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000004c))
++#define	PCIC_SLAVE_MASK1	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000050))
++#define	PCIC_SLAVE_MASK2	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000054))
++#define	PCIC_SLAVE_BASE_AT0	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000058))
++#define	PCIC_SLAVE_BASE_AT1	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000005c))
++#define	PCIC_SLAVE_BASE_AT2	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000060))
++#define	PCIC_CONF_COMMAND	(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000090))
++#define	PCIC_CONF_ADDR		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000094))
++#define	PCIC_CONF_DATA		(*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000098))
++
++/*------------------------------------------*/
++/* IIC_INTERFACE                            */
++/*------------------------------------------*/
++#define I2C_DATA_HI          (*(volatile unsigned int *)(I2C_BASE + 0x0))
++#define I2C_DATA_LOW         (*(volatile unsigned int *)(I2C_BASE + 0x4))
++#define I2C_CONFIG           (*(volatile unsigned int *)(I2C_BASE + 0x8))
++#define I2C_DATA_READ        (*(volatile unsigned int *)(I2C_BASE + 0xC))
++#define I2C_CLOCK_DIV        (*(volatile unsigned int *)(I2C_BASE + 0x10))
++
++#define I2CWRITE      0x200
++#define I2CREAD       0x300
++#define I2C_END_BURST 0x400
++
++/* read bits */
++#define I2C_READ_ERROR    0x8000
++#define I2C_READ_COMPLETE 0x4000
++#define I2C_READ_BUSY     0x2000
++
++/* device types */
++#define I2C_IO_EXPANDER      0x2
++#define I2C_RTC              0xd
++
++/* device Addresses on I2C bus (EVM3) */
++#define SEVEN_SEGMENT_DISP    0x23   /* Device type = 0x2, Addr = 3 */
++#define EVM3_RTC              0xd0   /* Device type = 0xd, Addr = 0 */
++#define EVM3_RTC_I2C_ADDR      0x0
++
++/*------------------------------------------*/
++/* Ethernet MAC register offset definitions */
++/*------------------------------------------*/
++#define VMAC_DMACONFIG(X)      (*(volatile unsigned int *)(X + 0x00000000))
++#define VMAC_INTSTS(X)         (*(volatile unsigned int *)(X + 0x00000004))
++#define VMAC_INTMASK(X)        (*(volatile unsigned int *)(X + 0x00000008))
++
++#define VMAC_WRAPCLK(X)        (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_STATSBASE(X)      (*(volatile unsigned int *)(X + 0x00000400))
++ 
++#define VMAC_TCRPTR(X)         (*(volatile unsigned int *)(X + 0x00000100))
++#define VMAC_TCRSIZE(X)        (*(volatile unsigned int *)(X + 0x00000104))
++#define VMAC_TCRINTTHRESH(X)   (*(volatile unsigned int *)(X + 0x00000108))
++#define VMAC_TCRTOTENT(X)      (*(volatile unsigned int *)(X + 0x0000010C))
++#define VMAC_TCRFREEENT(X)     (*(volatile unsigned int *)(X + 0x00000110))
++#define VMAC_TCRPENDENT(X)     (*(volatile unsigned int *)(X + 0x00000114))
++#define VMAC_TCRENTINC(X)      (*(volatile unsigned int *)(X + 0x00000118))
++#define VMAC_TXISRPACE(X)      (*(volatile unsigned int *)(X + 0x0000011c))
++
++
++#define VMAC_TDMASTATE0(X)     (*(volatile unsigned int *)(X + 0x00000120))
++#define VMAC_TDMASTATE1(X)     (*(volatile unsigned int *)(X + 0x00000124))
++#define VMAC_TDMASTATE2(X)     (*(volatile unsigned int *)(X + 0x00000128))
++#define VMAC_TDMASTATE3(X)     (*(volatile unsigned int *)(X + 0x0000012C))
++#define VMAC_TDMASTATE4(X)     (*(volatile unsigned int *)(X + 0x00000130))
++#define VMAC_TDMASTATE5(X)     (*(volatile unsigned int *)(X + 0x00000134))
++#define VMAC_TDMASTATE6(X)     (*(volatile unsigned int *)(X + 0x00000138))
++#define VMAC_TDMASTATE7(X)     (*(volatile unsigned int *)(X + 0x0000013C))
++#define VMAC_TXPADDCNT(X)      (*(volatile unsigned int *)(X + 0x00000140))
++#define VMAC_TXPADDSTART(X)    (*(volatile unsigned int *)(X + 0x00000144))
++#define VMAC_TXPADDEND(X)      (*(volatile unsigned int *)(X + 0x00000148))
++#define VMAC_TXQFLUSH(X)       (*(volatile unsigned int *)(X + 0x0000014C))
++ 
++#define VMAC_RCRPTR(X)         (*(volatile unsigned int *)(X + 0x00000200))
++#define VMAC_RCRSIZE(X)        (*(volatile unsigned int *)(X + 0x00000204))
++#define VMAC_RCRINTTHRESH(X)   (*(volatile unsigned int *)(X + 0x00000208))
++#define VMAC_RCRTOTENT(X)      (*(volatile unsigned int *)(X + 0x0000020C))
++#define VMAC_RCRFREEENT(X)     (*(volatile unsigned int *)(X + 0x00000210))
++#define VMAC_RCRPENDENT(X)     (*(volatile unsigned int *)(X + 0x00000214))
++#define VMAC_RCRENTINC(X)      (*(volatile unsigned int *)(X + 0x00000218))
++#define VMAC_RXISRPACE(X)      (*(volatile unsigned int *)(X + 0x0000021c))
++
++#define VMAC_RDMASTATE0(X)     (*(volatile unsigned int *)(X + 0x00000220))
++#define VMAC_RDMASTATE1(X)     (*(volatile unsigned int *)(X + 0x00000224))
++#define VMAC_RDMASTATE2(X)     (*(volatile unsigned int *)(X + 0x00000228))
++#define VMAC_RDMASTATE3(X)     (*(volatile unsigned int *)(X + 0x0000022C))
++#define VMAC_RDMASTATE4(X)     (*(volatile unsigned int *)(X + 0x00000230))
++#define VMAC_RDMASTATE5(X)     (*(volatile unsigned int *)(X + 0x00000234))
++#define VMAC_RDMASTATE6(X)     (*(volatile unsigned int *)(X + 0x00000238))
++#define VMAC_RDMASTATE7(X)     (*(volatile unsigned int *)(X + 0x0000023C))
++#define VMAC_FBLADDCNT(X)      (*(volatile unsigned int *)(X + 0x00000240))
++#define VMAC_FBLADDSTART(X)    (*(volatile unsigned int *)(X + 0x00000244))
++#define VMAC_FBLADDEND(X)      (*(volatile unsigned int *)(X + 0x00000248))
++#define VMAC_RXONOFF(X)        (*(volatile unsigned int *)(X + 0x0000024C))
++ 
++#define VMAC_FBL0NEXTD(X)      (*(volatile unsigned int *)(X + 0x00000280))
++#define VMAC_FBL0LASTD(X)      (*(volatile unsigned int *)(X + 0x00000284))
++#define VMAC_FBL0COUNTD(X)     (*(volatile unsigned int *)(X + 0x00000288))
++#define VMAC_FBL0BUFSIZE(X)    (*(volatile unsigned int *)(X + 0x0000028C))
++ 
++#define VMAC_MACCONTROL(X)     (*(volatile unsigned int *)(X + 0x00000300))
++#define VMAC_MACSTATUS(X)      (*(volatile unsigned int *)(X + 0x00000304))
++#define VMAC_MACADDRHI(X)      (*(volatile unsigned int *)(X + 0x00000308))
++#define VMAC_MACADDRLO(X)      (*(volatile unsigned int *)(X + 0x0000030C))
++#define VMAC_MACHASH1(X)       (*(volatile unsigned int *)(X + 0x00000310))
++#define VMAC_MACHASH2(X)       (*(volatile unsigned int *)(X + 0x00000314))
++ 
++#define VMAC_WRAPCLK(X)        (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_BOFTEST(X)        (*(volatile unsigned int *)(X + 0x00000344))
++#define VMAC_PACTEST(X)        (*(volatile unsigned int *)(X + 0x00000348))
++#define VMAC_PAUSEOP(X)        (*(volatile unsigned int *)(X + 0x0000034C))
++ 
++#define VMAC_MDIOCONTROL(X)    (*(volatile unsigned int *)(X + 0x00000380))
++#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384))
++#define VMAC_MDIOACK(X)        (*(volatile unsigned int *)(X + 0x00000388))
++#define VMAC_MDIOLINK(X)       (*(volatile unsigned int *)(X + 0x0000038C))
++#define VMAC_MDIOMACPHY(X)     (*(volatile unsigned int *)(X + 0x00000390))
++
++#define VMAC_STATS_BASE(X)     (X + 0x00000400)
++
++#endif __AVALANCHE_REGS_H
++
++
++
++
++
++
+diff -urN linux.old/include/asm-mips/ar7/avalanche_types.h linux.dev/include/asm-mips/ar7/avalanche_types.h
+--- linux.old/include/asm-mips/ar7/avalanche_types.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_types.h	2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,126 @@
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++#ifndef _avalanche_types_h_
++#define _avalanche_types_h_
++
++/*--- #include <asm/avalanche/generic/hal_modules/haltypes.h> ---*/
++#ifndef TRUE
++#define TRUE 1
++#endif
++#ifndef FALSE
++#define FALSE 0
++#endif
++#ifndef NULL
++#define NULL (void *)0
++#endif
++
++/*------------------------------------------------------------------------------------------*\
++ * Typen für Texas GPL Module
++\*------------------------------------------------------------------------------------------*/
++#ifndef __UINT8_T__
++typedef unsigned char   UINT8;
++#define __UINT8_T__
++#endif
++
++#ifndef __UCHAR_T__
++typedef unsigned char   UCHAR;
++#define __UCHAR_T__
++#endif
++
++#ifndef __INT8_T__
++typedef signed char     INT8;
++#define __INT8_T__
++#endif
++
++#ifndef __UINT16_T__
++typedef unsigned short  UINT16;
++#define __UINT16_T__
++#endif
++
++#ifndef __USHORT_T__
++typedef unsigned short  USHORT;
++#define __USHORT_T__
++#endif
++
++#ifndef __INT16_T__
++typedef signed short    INT16;
++#define __INT16_T__
++#endif
++
++#ifndef __UINT32_T__
++typedef unsigned int    UINT32;
++#define __UINT32_T__
++#endif
++
++#ifndef __UINT_T__
++typedef unsigned int    UINT;
++#define __UINT_T__
++#endif
++
++#ifndef __INT32_T__
++typedef signed int      INT32;
++#define __INT32_T__
++#endif
++
++#ifndef __ULONG_T__
++typedef unsigned long   ULONG;
++#define __ULONG_T__
++#endif
++
++#ifndef __BOOL_T__
++typedef int             BOOL;
++#define __BOOL_T__
++#endif
++
++#ifndef __STATUS_T__
++typedef int             STATUS;
++#define __STATUS_T__
++#endif
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++typedef void (*p_vlynq_intr_cntrl_isr_t)(void *,void *,void *);
++typedef INT32 (*p_vlynq_interrupt_vector_set_t)(void *, UINT32, UINT32, INT32, INT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_vector_cntl_t)(void *, UINT32, INT32, UINT32);
++typedef UINT32 (*p_vlynq_interrupt_get_count_t)(void *, UINT32);
++typedef INT32 (*p_vlynq_install_isr_t)(void *, UINT32, p_vlynq_intr_cntrl_isr_t, void *, void *, void *);
++typedef INT32 (*p_vlynq_uninstall_isr_t)(void *, UINT32, void *, void *, void *);
++typedef void (*p_vlynq_root_isr_t)(void *);
++typedef void (*p_vlynq_delay_t)(UINT32);
++typedef INT32 (*p_vlynq_interrupt_vector_map_t)(void *, INT32, UINT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_set_polarity_t)(void *, INT32, UINT32, INT32); 
++typedef INT32 (*p_vlynq_interrupt_get_polarity_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_set_type_t)(void *, INT32, UINT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_get_type_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_enable_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_disable_t)(void *, INT32, UINT32);
++                 
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++extern p_vlynq_interrupt_vector_set_t p_vlynq_interrupt_vector_set;
++extern p_vlynq_interrupt_vector_cntl_t p_vlynq_interrupt_vector_cntl;
++extern p_vlynq_interrupt_get_count_t p_vlynq_interrupt_get_count;
++extern p_vlynq_install_isr_t p_vlynq_install_isr;
++extern p_vlynq_uninstall_isr_t p_vlynq_uninstall_isr;
++extern p_vlynq_root_isr_t p_vlynq_root_isr;
++extern p_vlynq_delay_t p_vlynq_delay;
++extern p_vlynq_interrupt_vector_map_t p_vlynq_interrupt_vector_map;
++extern p_vlynq_interrupt_set_polarity_t p_vlynq_interrupt_set_polarity;
++extern p_vlynq_interrupt_get_polarity_t p_vlynq_interrupt_get_polarity;
++extern p_vlynq_interrupt_set_type_t p_vlynq_interrupt_set_type;
++extern p_vlynq_interrupt_get_type_t p_vlynq_interrupt_get_type;
++extern p_vlynq_interrupt_enable_t p_vlynq_interrupt_enable;
++extern p_vlynq_interrupt_disable_t p_vlynq_interrupt_disable;
++extern void *p_vlynqDevice0;
++extern void *p_vlynqDevice1;
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++enum _avalanche_need_ {
++    avalanche_need_vlynq,
++    avalanche_need_auto_mdix
++};
++
++int avalanche_need(enum _avalanche_need_);
++
++#endif /*--- #ifndef _avalanche_types_h_ ---*/
+diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h
+--- linux.old/include/asm-mips/ar7/if_port.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/if_port.h	2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,26 @@
++/*******************************************************************************   
++ * FILE PURPOSE:    Interface port id Header file                                      
++ *******************************************************************************   
++ * FILE NAME:       if_port.h                                                   
++ *                                                                                 
++ * DESCRIPTION:     Header file carrying information about port ids of interfaces                             
++ *                                                                                 
++ *                                                                                 
++ * (C) Copyright 2003, Texas Instruments, Inc                                      
++ ******************************************************************************/   
++#ifndef _IF_PORT_H_
++#define _IF_PORT_H_
++
++#define AVALANCHE_CPMAC_LOW_PORT_ID         0
++#define AVALANCHE_CPMAC_HIGH_PORT_ID        1    
++#define AVALANCHE_USB_PORT_ID               2
++#define AVALANCHE_WLAN_PORT_ID              3
++
++
++#define AVALANCHE_MARVELL_BASE_PORT_ID      4
++
++/* The marvell ports occupy port ids from  4 to 8 */
++/* so the next port id number should start at 9   */
++
++
++#endif /* _IF_PORT_H_ */
+diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h
+--- linux.old/include/asm-mips/ar7/sangam.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/sangam.h	2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,180 @@
++#ifndef _SANGAM_H_
++#define _SANGAM_H_
++
++#include <linux/config.h>
++#include <asm/addrspace.h>
++
++/*----------------------------------------------------
++ * Sangam's Module Base Addresses
++ *--------------------------------------------------*/
++#define AVALANCHE_ADSL_SUB_SYS_MEM_BASE       (KSEG1ADDR(0x01000000)) /* AVALANCHE ADSL Mem Base */
++#define AVALANCHE_BROADBAND_INTERFACE__BASE   (KSEG1ADDR(0x02000000)) /* AVALANCHE BBIF */        
++#define AVALANCHE_ATM_SAR_BASE                (KSEG1ADDR(0x03000000)) /* AVALANCHE ATM SAR */
++#define AVALANCHE_USB_SLAVE_BASE              (KSEG1ADDR(0x03400000)) /* AVALANCHE USB SLAVE */
++#define AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE      (KSEG1ADDR(0x04000000)) /* AVALANCHE VLYNQ 0 Mem map */
++#define AVALANCHE_LOW_CPMAC_BASE              (KSEG1ADDR(0x08610000)) /* AVALANCHE CPMAC 0 */
++#define AVALANCHE_EMIF_CONTROL_BASE           (KSEG1ADDR(0x08610800)) /* AVALANCHE EMIF */
++#define AVALANCHE_GPIO_BASE                   (KSEG1ADDR(0x08610900)) /* AVALANCHE GPIO */
++#define AVALANCHE_CLOCK_CONTROL_BASE          (KSEG1ADDR(0x08610A00)) /* AVALANCHE Clock Control */
++#define AVALANCHE_WATCHDOG_TIMER_BASE         (KSEG1ADDR(0x08610B00)) /* AVALANCHE Watch Dog Timer */  
++#define AVALANCHE_TIMER0_BASE                 (KSEG1ADDR(0x08610C00)) /* AVALANCHE Timer 1 */  
++#define AVALANCHE_TIMER1_BASE                 (KSEG1ADDR(0x08610D00)) /* AVALANCHE Timer 2 */  
++#define AVALANCHE_UART0_REGS_BASE             (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_UART1_REGS_BASE             (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_I2C_BASE                    (KSEG1ADDR(0x08611000)) /* AVALANCHE I2C */
++#define AVALANCHE_USB_SLAVE_CONTROL_BASE      (KSEG1ADDR(0x08611200)) /* AVALANCHE USB DMA */
++#define AVALANCHE_MCDMA0_CTRL_BASE            (KSEG1ADDR(0x08611400)) /* AVALANCHE MC DMA 0 (channels 0-3) */
++#define AVALANCHE_RESET_CONTROL_BASE          (KSEG1ADDR(0x08611600)) /* AVALANCHE Reset Control */
++#define AVALANCHE_BIST_CONTROL_BASE           (KSEG1ADDR(0x08611700)) /* AVALANCHE BIST Control */
++#define AVALANCHE_LOW_VLYNQ_CONTROL_BASE      (KSEG1ADDR(0x08611800)) /* AVALANCHE VLYNQ0 Control */
++#define AVALANCHE_DEVICE_CONFIG_LATCH_BASE    (KSEG1ADDR(0x08611A00)) /* AVALANCHE Device Config Latch */
++#define AVALANCHE_HIGH_VLYNQ_CONTROL_BASE     (KSEG1ADDR(0x08611C00)) /* AVALANCHE VLYNQ1 Control */
++#define AVALANCHE_MDIO_BASE                   (KSEG1ADDR(0x08611E00)) /* AVALANCHE MDIO    */
++#define AVALANCHE_FSER_BASE                   (KSEG1ADDR(0x08612000)) /* AVALANCHE FSER base */
++#define AVALANCHE_INTC_BASE                   (KSEG1ADDR(0x08612400)) /* AVALANCHE INTC  */
++#define AVALANCHE_HIGH_CPMAC_BASE             (KSEG1ADDR(0x08612800)) /* AVALANCHE CPMAC 1 */
++#define AVALANCHE_HIGH_VLYNQ_MEM_MAP_BASE     (KSEG1ADDR(0x0C000000)) /* AVALANCHE VLYNQ 1 Mem map */
++
++#define AVALANCHE_SDRAM_BASE                  0x14000000UL
++
++
++/*----------------------------------------------------
++ * Sangam Interrupt Map (Primary Interrupts)
++ *--------------------------------------------------*/
++
++#define AVALANCHE_UNIFIED_SECONDARY_INT            0
++#define AVALANCHE_EXT_INT_0                        1
++#define AVALANCHE_EXT_INT_1                        2
++/* Line#  3 to 4 are reserved                            */
++#define AVALANCHE_TIMER_0_INT                      5
++#define AVALANCHE_TIMER_1_INT                      6
++#define AVALANCHE_UART0_INT                        7
++#define AVALANCHE_UART1_INT                        8
++#define AVALANCHE_DMA_INT0                         9
++#define AVALANCHE_DMA_INT1                        10
++/* Line# 11 to 14 are reserved                    */
++#define AVALANCHE_ATM_SAR_INT                     15
++/* Line# 16 to 18 are reserved                    */
++#define AVALANCHE_LOW_CPMAC_INT                   19
++/* Line# 20 is reserved                           */
++#define AVALANCHE_LOW_VLYNQ_INT                   21
++#define AVALANCHE_CODEC_WAKEUP_INT                22
++/* Line# 23 is reserved                           */
++#define AVALANCHE_USB_SLAVE_INT                   24
++#define AVALANCHE_HIGH_VLYNQ_INT                  25
++/* Line# 26 to 27 are reserved                    */
++#define AVALANCHE_UNIFIED_PHY_INT                 28
++#define AVALANCHE_I2C_INT                         29
++#define AVALANCHE_DMA_INT2                        30
++#define AVALANCHE_DMA_INT3                        31
++/* Line# 32 is reserved                           */
++#define AVALANCHE_HIGH_CPMAC_INT                  33
++/* Line# 34 to 36 is reserved                     */
++#define AVALANCHE_VDMA_VT_RX_INT                  37
++#define AVALANCHE_VDMA_VT_TX_INT                  38
++#define AVALANCHE_ADSL_SUB_SYSTEM_INT             39
++
++
++#define AVALANCHE_EMIF_INT                        47
++
++
++
++/*-----------------------------------------------------------
++ * Sangam's Reset Bits
++ *---------------------------------------------------------*/
++
++#define AVALANCHE_UART0_RESET_BIT                  0
++#define AVALANCHE_UART1_RESET_BIT                  1
++#define AVALANCHE_I2C_RESET_BIT                    2
++#define AVALANCHE_TIMER0_RESET_BIT                 3
++#define AVALANCHE_TIMER1_RESET_BIT                 4
++/* Reset bit  5 is reserved.                       */
++#define AVALANCHE_GPIO_RESET_BIT                   6
++#define AVALANCHE_ADSL_SUB_SYS_RESET_BIT           7
++#define AVALANCHE_USB_SLAVE_RESET_BIT              8
++#define AVALANCHE_ATM_SAR_RESET_BIT                9
++/* Reset bit 10 is reserved.                      */
++#define AVALANCHE_VDMA_VT_RESET_BIT               11
++#define AVALANCHE_FSER_RESET_BIT                  12
++/* Reset bit 13 to 15 are reserved                */
++#define AVALANCHE_HIGH_VLYNQ_RESET_BIT            16
++#define AVALANCHE_LOW_CPMAC_RESET_BIT             17
++#define AVALANCHE_MCDMA_RESET_BIT                 18
++#define AVALANCHE_BIST_RESET_BIT                  19
++#define AVALANCHE_LOW_VLYNQ_RESET_BIT             20
++#define AVALANCHE_HIGH_CPMAC_RESET_BIT            21
++#define AVALANCHE_MDIO_RESET_BIT                  22
++#define AVALANCHE_ADSL_SUB_SYS_DSP_RESET_BIT      23
++/* Reset bit 24 to 25 are reserved                */
++#define AVALANCHE_LOW_EPHY_RESET_BIT              26
++/* Reset bit 27 to 31 are reserved                */
++
++
++#define AVALANCHE_POWER_MODULE_USBSP               0
++#define AVALANCHE_POWER_MODULE_WDTP                1
++#define AVALANCHE_POWER_MODULE_UT0P                2
++#define AVALANCHE_POWER_MODULE_UT1P                3
++#define AVALANCHE_POWER_MODULE_IICP                4
++#define AVALANCHE_POWER_MODULE_VDMAP               5
++#define AVALANCHE_POWER_MODULE_GPIOP               6
++#define AVALANCHE_POWER_MODULE_VLYNQ1P             7
++#define AVALANCHE_POWER_MODULE_SARP                8
++#define AVALANCHE_POWER_MODULE_ADSLP               9
++#define AVALANCHE_POWER_MODULE_EMIFP              10
++#define AVALANCHE_POWER_MODULE_ADSPP              12
++#define AVALANCHE_POWER_MODULE_RAMP               13
++#define AVALANCHE_POWER_MODULE_ROMP               14
++#define AVALANCHE_POWER_MODULE_DMAP               15
++#define AVALANCHE_POWER_MODULE_BISTP              16
++#define AVALANCHE_POWER_MODULE_TIMER0P            18
++#define AVALANCHE_POWER_MODULE_TIMER1P            19
++#define AVALANCHE_POWER_MODULE_EMAC0P             20
++#define AVALANCHE_POWER_MODULE_EMAC1P             22
++#define AVALANCHE_POWER_MODULE_EPHYP              24
++#define AVALANCHE_POWER_MODULE_VLYNQ0P            27
++
++
++
++
++
++/*
++ * Sangam board vectors
++ */
++
++#define AVALANCHE_VECS       (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
++
++/*-----------------------------------------------------------------------------
++ * Sangam's system register.
++ * 
++ *---------------------------------------------------------------------------*/
++#define AVALANCHE_DCL_BOOTCR          (KSEG1ADDR(0x08611A00))
++#define AVALANCHE_EMIF_SDRAM_CFG      (AVALANCHE_EMIF_CONTROL_BASE + 0x8)
++#define AVALANCHE_RST_CTRL_PRCR       (KSEG1ADDR(0x08611600))
++#define AVALANCHE_RST_CTRL_SWRCR      (KSEG1ADDR(0x08611604))
++#define AVALANCHE_RST_CTRL_RSR        (KSEG1ADDR(0x08611600))
++
++#define AVALANCHE_POWER_CTRL_PDCR     (KSEG1ADDR(0x08610A00))
++#define AVALANCHE_WAKEUP_CTRL_WKCR    (KSEG1ADDR(0x08610A0C))
++
++#define AVALANCHE_GPIO_DATA_IN        (AVALANCHE_GPIO_BASE +  0x0)
++#define AVALANCHE_GPIO_DATA_OUT       (AVALANCHE_GPIO_BASE +  0x4)
++#define AVALANCHE_GPIO_DIR            (AVALANCHE_GPIO_BASE +  0x8)    
++#define AVALANCHE_GPIO_ENBL           (AVALANCHE_GPIO_BASE +  0xC)
++#define AVALANCHE_CVR                 (AVALANCHE_GPIO_BASE +  0x14)
++
++/*
++ * Yamon Prom print address.
++ */
++#define AVALANCHE_YAMON_FUNCTION_BASE             (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR     (AVALANCHE_YAMON_FUNCTION_BASE + 0x4)  /* print_count function */
++#define AVALANCHE_YAMON_PROM_PRINT_ADDR           (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++
++#define AVALANCHE_BASE_BAUD       ( 3686400 / 16 )
++
++#define  AVALANCHE_GPIO_PIN_COUNT         32             
++#define  AVALANCHE_GPIO_OFF_MAP           {0xF34FFFC0} 
++
++#include "sangam_boards.h"
++
++#endif /*_SANGAM_H_ */
+diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h
+--- linux.old/include/asm-mips/ar7/sangam_boards.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/sangam_boards.h	2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,77 @@
++#ifndef _SANGAM_BOARDS_H
++#define _SANGAM_BOARDS_H
++
++// Let us define board specific information here. 
++
++
++#if defined(CONFIG_AR7DB)
++
++#define AFECLK_FREQ                                 35328000
++#define REFCLK_FREQ                                 25000000
++#define OSC3_FREQ                                   24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x55555555  
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
++
++#endif
++
++
++#if defined(CONFIG_AR7RD)
++#define AFECLK_FREQ                                 35328000
++#define REFCLK_FREQ                                 25000000
++#define OSC3_FREQ                                   24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7WI)
++#define AFECLK_FREQ                                 35328000
++#define REFCLK_FREQ                                 25000000
++#define OSC3_FREQ                                   24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7V)
++#define AFECLK_FREQ                                 35328000
++#define REFCLK_FREQ                                 25000000
++#define OSC3_FREQ                                   24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7WRD) 
++#define AFECLK_FREQ                                 35328000
++#define REFCLK_FREQ                                 25000000
++#define OSC3_FREQ                                   24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x00010000
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7VWI) 
++#define AFECLK_FREQ                                 35328000
++#define REFCLK_FREQ                                 25000000
++#define OSC3_FREQ                                   24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK                0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x00010000
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0x80000000
++#endif
++
++
++#if defined CONFIG_SEAD2
++#define AVALANCHE_LOW_CPMAC_PHY_MASK                0xAAAAAAAA
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK               0x55555555
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK               0
++#include <asm/mips-boards/sead.h>
++#endif
++
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx.h	2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,338 @@
++/******************************************************************************
++ * FILE PURPOSE:    TNETD73xx Common Header File
++ ******************************************************************************
++ * FILE NAME:       tnetd73xx.h
++ *
++ * DESCRIPTION:     shared typedef's, constants and API for TNETD73xx
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++/*
++ *
++ *
++ *   These are const, typedef, and api definitions for tnetd73xx.
++ *
++ *   NOTES:
++ *   1. This file may be included into both C and Assembly files.
++ *       - for .s files, please do #define _ASMLANGUAGE in your ASM file to
++ *           avoid C data types (typedefs) below;
++ *       - for .c files, you don't have to do anything special.
++ *
++ *   2. This file has a number of sections for each SOC subsystem. When adding
++ *       a new constant, find the subsystem you are working on and follow the
++ *       name pattern. If you are adding another typedef for your interface, please,
++ *       place it with other typedefs and function prototypes.
++ *
++ *   3. Please, DO NOT add any macros or types that are local to a subsystem to avoid
++ *       cluttering. Include such items directly into the module's .c file or have a
++ *       local .h file to pass data between smaller modules. This file defines only
++ *       shared items.
++ */
++
++#ifndef __TNETD73XX_H__
++#define __TNETD73XX_H__
++
++#ifndef _ASMLANGUAGE        /* This part not for assembly language */
++
++extern unsigned int tnetd73xx_mips_freq;
++extern unsigned int tnetd73xx_vbus_freq;
++
++#include "tnetd73xx_err.h"
++
++#endif /* _ASMLANGUAGE */
++
++
++/*******************************************************************************************
++*   Emerald core specific
++******************************************************************************************** */
++
++#ifdef  BIG_ENDIAN
++#elif defined(LITTLE_ENDIAN)
++#else
++#error Need to define endianism
++#endif
++
++#ifndef KSEG_MSK
++#define KSEG_MSK                    0xE0000000 /* Most significant 3 bits denote kseg choice */
++#endif
++
++#ifndef KSEG_INV_MASK
++#define KSEG_INV_MASK               0x1FFFFFFF /* Inverted mask for kseg address */
++#endif
++
++#ifndef KSEG0_BASE
++#define KSEG0_BASE                  0x80000000
++#endif
++
++#ifndef KSEG1_BASE
++#define KSEG1_BASE                  0xA0000000
++#endif
++
++#ifndef KSEG0
++#define KSEG0(addr)                 (((__u32)(addr) & ~KSEG_MSK) | KSEG0_BASE)
++#endif
++
++#ifndef KSEG1
++#define KSEG1(addr)                 (((__u32)(addr) & ~KSEG_MSK) | KSEG1_BASE)
++#endif
++
++#ifndef KUSEG
++#define KUSEG(addr)                 ((__u32)(addr) & ~KSEG_MSK)
++#endif
++
++#ifndef PHYS_ADDR
++#define PHYS_ADDR(addr)             ((addr) & KSEG_INV_MASK)
++#endif
++
++#ifndef PHYS_TO_K0
++#define PHYS_TO_K0(addr)            (PHYS_ADDR(addr)|KSEG0_BASE)
++#endif
++
++#ifndef PHYS_TO_K1
++#define PHYS_TO_K1(addr)            (PHYS_ADDR(addr)|KSEG1_BASE)
++#endif
++
++#ifndef REG8_ADDR
++#define REG8_ADDR(addr)             (volatile __u8 *)(PHYS_TO_K1(addr))
++#define REG8_DATA(addr)             (*(volatile __u8 *)(PHYS_TO_K1(addr)))
++#define REG8_WRITE(addr, data)      REG8_DATA(addr) = data;
++#define REG8_READ(addr, data)       data = (__u8) REG8_DATA(addr);
++#endif
++
++#ifndef REG16_ADDR
++#define REG16_ADDR(addr)            (volatile __u16 *)(PHYS_TO_K1(addr))
++#define REG16_DATA(addr)            (*(volatile __u16 *)(PHYS_TO_K1(addr)))
++#define REG16_WRITE(addr, data)     REG16_DATA(addr) = data;
++#define REG16_READ(addr, data)      data = (__u16) REG16_DATA(addr);
++#endif
++
++#ifndef REG32_ADDR
++#define REG32_ADDR(addr)            (volatile __u32 *)(PHYS_TO_K1(addr))
++#define REG32_DATA(addr)            (*(volatile __u32 *)(PHYS_TO_K1(addr)))
++#define REG32_WRITE(addr, data)     REG32_DATA(addr) = data;
++#define REG32_READ(addr, data)      data = (__u32) REG32_DATA(addr);
++#endif
++
++#ifdef  _LINK_KSEG0_                /* Application is linked into KSEG0 space */
++#define VIRT_ADDR(addr)             PHYS_TO_K0(PHYS_ADDR(addr))
++#endif
++
++#ifdef  _LINK_KSEG1_                /* Application is linked into KSEG1 space */
++#define VIRT_ADDR(addr)             PHYS_TO_K1(PHYS_ADDR(addr))
++#endif
++
++#if !defined(_LINK_KSEG0_) && !defined(_LINK_KSEG1_)
++#error  You must define _LINK_KSEG0_ or _LINK_KSEG1_ to compile the code.
++#endif
++
++/* TNETD73XX chip definations */
++
++#define FREQ_1MHZ                       1000000
++#define TNETD73XX_MIPS_FREQ             tnetd73xx_mips_freq /* CPU clock frequency */
++#define TNETD73XX_VBUS_FREQ             tnetd73xx_vbus_freq /* originally (TNETD73XX_MIPS_FREQ/2) */
++
++#ifdef AR7SEAD2
++#define TNETD73XX_MIPS_FREQ_DEFAULT     25000000       /* 25 Mhz for sead2 board crystal */
++#else
++#define TNETD73XX_MIPS_FREQ_DEFAULT     125000000      /* 125 Mhz */
++#endif
++#define TNETD73XX_VBUS_FREQ_DEFAULT     (TNETD73XX_MIPS_FREQ_DEFAULT / 2) /* Sync mode */
++
++
++
++/* Module base addresses */
++#define TNETD73XX_ADSLSS_BASE               PHYS_TO_K1(0x01000000)      /* ADSLSS Module */
++#define TNETD73XX_BBIF_CTRL_BASE            PHYS_TO_K1(0x02000000)      /* BBIF Control */
++#define TNETD73XX_ATMSAR_BASE               PHYS_TO_K1(0x03000000)      /* ATM SAR */
++#define TNETD73XX_USB_BASE                  PHYS_TO_K1(0x03400000)      /* USB Module */
++#define TNETD73XX_VLYNQ0_BASE               PHYS_TO_K1(0x04000000)      /* VLYNQ0 Module */
++#define TNETD73xx_EMAC0_BASE                PHYS_TO_K1(0x08610000)      /* EMAC0 Module*/
++#define TNETD73XX_EMIF_BASE                 PHYS_TO_K1(0x08610800)      /* EMIF Module */
++#define TNETD73XX_GPIO_BASE                 PHYS_TO_K1(0x08610900)      /* GPIO control */
++#define TNETD73XX_CLOCK_CTRL_BASE           PHYS_TO_K1(0x08610A00)      /* Clock Control */
++#define TNETD73XX_WDTIMER_BASE              PHYS_TO_K1(0x08610B00)      /* WDTIMER Module */
++#define TNETD73XX_TIMER0_BASE               PHYS_TO_K1(0x08610C00)      /* TIMER0 Module */
++#define TNETD73XX_TIMER1_BASE               PHYS_TO_K1(0x08610D00)      /* TIMER1 Module */
++#define TNETD73XX_UARTA_BASE                PHYS_TO_K1(0x08610E00)      /* UART A */
++#define TNETD73XX_UARTB_BASE                PHYS_TO_K1(0x08610F00)      /* UART B */
++#define TNETD73XX_I2C_BASE                  PHYS_TO_K1(0x08611000)      /* I2C Module */
++#define TNETD73XX_USB_DMA_BASE              PHYS_TO_K1(0x08611200)      /* USB Module */
++#define TNETD73XX_MCDMA_BASE                PHYS_TO_K1(0x08611400)      /* MC-DMA */
++#define TNETD73xx_VDMAVT_BASE               PHYS_TO_K1(0x08611500)      /* VDMAVT Control */
++#define TNETD73XX_RST_CTRL_BASE             PHYS_TO_K1(0x08611600)      /* Reset Control */
++#define TNETD73xx_BIST_CTRL_BASE            PHYS_TO_K1(0x08611700)      /* BIST Control */
++#define TNETD73xx_VLYNQ0_CTRL_BASE          PHYS_TO_K1(0x08611800)      /* VLYNQ0 Control */
++#define TNETD73XX_DCL_BASE                  PHYS_TO_K1(0x08611A00)      /* Device Configuration Latch */
++#define TNETD73xx_VLYNQ1_CTRL_BASE          PHYS_TO_K1(0x08611C00)      /* VLYNQ1 Control */
++#define TNETD73xx_MDIO_BASE                 PHYS_TO_K1(0x08611E00)      /* MDIO Control */
++#define TNETD73XX_FSER_BASE                 PHYS_TO_K1(0x08612000)      /* FSER Control */
++#define TNETD73XX_INTC_BASE                 PHYS_TO_K1(0x08612400)      /* Interrupt Controller */
++#define TNETD73xx_EMAC1_BASE                PHYS_TO_K1(0x08612800)      /* EMAC1 Module*/
++#define TNETD73XX_VLYNQ1_BASE               PHYS_TO_K1(0x0C000000)      /* VLYNQ1 Module */
++
++/* BBIF Registers */
++#define TNETD73XX_BBIF_ADSLADR              (TNETD73XX_BBIF_CTRL_BASE + 0x0)
++
++/* Device Configuration Latch Registers */
++#define TNETD73XX_DCL_BOOTCR                (TNETD73XX_DCL_BASE + 0x0)
++#define TNETD73XX_DCL_DPLLSELR              (TNETD73XX_DCL_BASE + 0x10)
++#define TNETD73XX_DCL_SPEEDCTLR             (TNETD73XX_DCL_BASE + 0x14)
++#define TNETD73XX_DCL_SPEEDPWDR             (TNETD73XX_DCL_BASE + 0x18)
++#define TNETD73XX_DCL_SPEEDCAPR             (TNETD73XX_DCL_BASE + 0x1C)
++
++/* GPIO Control */
++#define TNETD73XX_GPIODINR                  (TNETD73XX_GPIO_BASE + 0x0)
++#define TNETD73XX_GPIODOUTR                 (TNETD73XX_GPIO_BASE + 0x4)
++#define TNETD73XX_GPIOPDIRR                 (TNETD73XX_GPIO_BASE + 0x8)
++#define TNETD73XX_GPIOENR                   (TNETD73XX_GPIO_BASE + 0xC)
++#define TNETD73XX_CVR                       (TNETD73XX_GPIO_BASE + 0x14)
++#define TNETD73XX_DIDR1                     (TNETD73XX_GPIO_BASE + 0x18)
++#define TNETD73XX_DIDR2                     (TNETD73XX_GPIO_BASE + 0x1C)
++
++/* Reset Control  */
++#define TNETD73XX_RST_CTRL_PRCR             (TNETD73XX_RST_CTRL_BASE + 0x0)
++#define TNETD73XX_RST_CTRL_SWRCR            (TNETD73XX_RST_CTRL_BASE + 0x4)
++#define TNETD73XX_RST_CTRL_RSR              (TNETD73XX_RST_CTRL_BASE + 0x8)
++
++/* Power Control  */
++#define TNETD73XX_POWER_CTRL_PDCR           (TNETD73XX_CLOCK_CTRL_BASE + 0x0)
++#define TNETD73XX_POWER_CTRL_PCLKCR         (TNETD73XX_CLOCK_CTRL_BASE + 0x4)
++#define TNETD73XX_POWER_CTRL_PDUCR          (TNETD73XX_CLOCK_CTRL_BASE + 0x8)
++#define TNETD73XX_POWER_CTRL_WKCR           (TNETD73XX_CLOCK_CTRL_BASE + 0xC)
++
++/* Clock Control */
++#define TNETD73XX_CLK_CTRL_SCLKCR           (TNETD73XX_CLOCK_CTRL_BASE + 0x20)
++#define TNETD73XX_CLK_CTRL_SCLKPLLCR        (TNETD73XX_CLOCK_CTRL_BASE + 0x30)
++#define TNETD73XX_CLK_CTRL_MCLKCR           (TNETD73XX_CLOCK_CTRL_BASE + 0x40)
++#define TNETD73XX_CLK_CTRL_MCLKPLLCR        (TNETD73XX_CLOCK_CTRL_BASE + 0x50)
++#define TNETD73XX_CLK_CTRL_UCLKCR           (TNETD73XX_CLOCK_CTRL_BASE + 0x60)
++#define TNETD73XX_CLK_CTRL_UCLKPLLCR        (TNETD73XX_CLOCK_CTRL_BASE + 0x70)
++#define TNETD73XX_CLK_CTRL_ACLKCR0          (TNETD73XX_CLOCK_CTRL_BASE + 0x80)
++#define TNETD73XX_CLK_CTRL_ACLKPLLCR0       (TNETD73XX_CLOCK_CTRL_BASE + 0x90)
++#define TNETD73XX_CLK_CTRL_ACLKCR1          (TNETD73XX_CLOCK_CTRL_BASE + 0xA0)
++#define TNETD73XX_CLK_CTRL_ACLKPLLCR1       (TNETD73XX_CLOCK_CTRL_BASE + 0xB0)
++
++/* EMIF control */
++#define TNETD73XX_EMIF_SDRAM_CFG              ( TNETD73XX_EMIF_BASE + 0x08 )                
++
++/* UART */
++#ifdef AR7SEAD2
++#define TNETD73XX_UART_FREQ                 3686400
++#else
++#define TNETD73XX_UART_FREQ                 TNETD73XX_VBUS_FREQ
++#endif
++
++/* Interrupt Controller */
++
++/* Primary interrupts */
++#define TNETD73XX_INTC_UNIFIED_SECONDARY    0   /* Unified secondary interrupt */
++#define TNETD73XX_INTC_EXTERNAL0            1   /* External Interrupt Line 0 */
++#define TNETD73XX_INTC_EXTERNAL1            2   /* External Interrupt Line 1 */
++#define TNETD73XX_INTC_RESERVED3            3   /* Reserved */
++#define TNETD73XX_INTC_RESERVED4            4   /* Reserved */
++#define TNETD73XX_INTC_TIMER0               5   /* TIMER 0 int */
++#define TNETD73XX_INTC_TIMER1               6   /* TIMER 1 int */
++#define TNETD73XX_INTC_UART0                7   /* UART 0 int */
++#define TNETD73XX_INTC_UART1                8   /* UART 1 int */
++#define TNETD73XX_INTC_MCDMA0               9   /* MCDMA 0 int */
++#define TNETD73XX_INTC_MCDMA1               10  /* MCDMA 1 int */
++#define TNETD73XX_INTC_RESERVED11           11  /* Reserved */
++#define TNETD73XX_INTC_RESERVED12           12  /* Reserved */
++#define TNETD73XX_INTC_RESERVED13           13  /* Reserved */
++#define TNETD73XX_INTC_RESERVED14           14  /* Reserved */
++#define TNETD73XX_INTC_ATMSAR               15  /* ATM SAR int */
++#define TNETD73XX_INTC_RESERVED16           16  /* Reserved */
++#define TNETD73XX_INTC_RESERVED17           17  /* Reserved */
++#define TNETD73XX_INTC_RESERVED18           18  /* Reserved */
++#define TNETD73XX_INTC_EMAC0                19  /* EMAC 0 int */
++#define TNETD73XX_INTC_RESERVED20           20  /* Reserved */
++#define TNETD73XX_INTC_VLYNQ0               21  /* VLYNQ 0 int */
++#define TNETD73XX_INTC_CODEC                22  /* CODEC int */
++#define TNETD73XX_INTC_RESERVED23           23  /* Reserved */
++#define TNETD73XX_INTC_USBSLAVE             24  /* USB Slave int */
++#define TNETD73XX_INTC_VLYNQ1               25  /* VLYNQ 1 int */
++#define TNETD73XX_INTC_RESERVED26           26  /* Reserved */
++#define TNETD73XX_INTC_RESERVED27           27  /* Reserved */
++#define TNETD73XX_INTC_ETH_PHY              28  /* Ethernet PHY   */
++#define TNETD73XX_INTC_I2C                  29  /* I2C int */
++#define TNETD73XX_INTC_MCDMA2               30  /* MCDMA 2 int */
++#define TNETD73XX_INTC_MCDMA3               31  /* MCDMA 3 int */
++#define TNETD73XX_INTC_RESERVED32           32  /* Reserved */
++#define TNETD73XX_INTC_EMAC1                33  /* EMAC 1 int */
++#define TNETD73XX_INTC_RESERVED34           34  /* Reserved */
++#define TNETD73XX_INTC_RESERVED35           35  /* Reserved */
++#define TNETD73XX_INTC_RESERVED36           36  /* Reserved */
++#define TNETD73XX_INTC_VDMAVTRX             37  /* VDMAVTRX */
++#define TNETD73XX_INTC_VDMAVTTX             38  /* VDMAVTTX */
++#define TNETD73XX_INTC_ADSLSS               39  /* ADSLSS */
++
++/* Secondary interrupts */
++#define TNETD73XX_INTC_SEC0                 40  /* Secondary */
++#define TNETD73XX_INTC_SEC1                 41  /* Secondary */
++#define TNETD73XX_INTC_SEC2                 42  /* Secondary */
++#define TNETD73XX_INTC_SEC3                 43  /* Secondary */
++#define TNETD73XX_INTC_SEC4                 44  /* Secondary */
++#define TNETD73XX_INTC_SEC5                 45  /* Secondary */
++#define TNETD73XX_INTC_SEC6                 46  /* Secondary */
++#define TNETD73XX_INTC_EMIF                 47  /* EMIF */
++#define TNETD73XX_INTC_SEC8                 48  /* Secondary */
++#define TNETD73XX_INTC_SEC9                 49  /* Secondary */
++#define TNETD73XX_INTC_SEC10                50  /* Secondary */
++#define TNETD73XX_INTC_SEC11                51  /* Secondary */
++#define TNETD73XX_INTC_SEC12                52  /* Secondary */
++#define TNETD73XX_INTC_SEC13                53  /* Secondary */
++#define TNETD73XX_INTC_SEC14                54  /* Secondary */
++#define TNETD73XX_INTC_SEC15                55  /* Secondary */
++#define TNETD73XX_INTC_SEC16                56  /* Secondary */
++#define TNETD73XX_INTC_SEC17                57  /* Secondary */
++#define TNETD73XX_INTC_SEC18                58  /* Secondary */
++#define TNETD73XX_INTC_SEC19                59  /* Secondary */
++#define TNETD73XX_INTC_SEC20                60  /* Secondary */
++#define TNETD73XX_INTC_SEC21                61  /* Secondary */
++#define TNETD73XX_INTC_SEC22                62  /* Secondary */
++#define TNETD73XX_INTC_SEC23                63  /* Secondary */
++#define TNETD73XX_INTC_SEC24                64  /* Secondary */
++#define TNETD73XX_INTC_SEC25                65  /* Secondary */
++#define TNETD73XX_INTC_SEC26                66  /* Secondary */
++#define TNETD73XX_INTC_SEC27                67  /* Secondary */
++#define TNETD73XX_INTC_SEC28                68  /* Secondary */
++#define TNETD73XX_INTC_SEC29                69  /* Secondary */
++#define TNETD73XX_INTC_SEC30                70  /* Secondary */
++#define TNETD73XX_INTC_SEC31                71  /* Secondary */
++
++/* These ugly macros are to access the -1 registers, like config1 */
++#define MFC0_SEL1_OPCODE(dst, src)\
++        .word (0x40000000 | ((dst)<<16) | ((src)<<11) | 1);\
++        nop; \
++        nop; \
++        nop
++
++#define MTC0_SEL1_OPCODE(dst, src)\
++        .word (0x40800000 | ((dst)<<16) | ((src)<<11) | 1);\
++        nop; \
++        nop; \
++        nop
++
++
++/* Below are Jade core specific */
++#define CFG0_4K_IL_MASK         0x00380000
++#define CFG0_4K_IL_SHIFT        19
++#define CFG0_4K_IA_MASK         0x00070000
++#define CFG0_4K_IA_SHIFT        16
++#define CFG0_4K_IS_MASK         0x01c00000
++#define CFG0_4K_IS_SHIFT        22
++
++#define CFG0_4K_DL_MASK         0x00001c00
++#define CFG0_4K_DL_SHIFT        10
++#define CFG0_4K_DA_MASK         0x00000380
++#define CFG0_4K_DA_SHIFT        7
++#define CFG0_4K_DS_MASK         0x0000E000
++#define CFG0_4K_DS_SHIFT        13
++
++
++
++#endif /* __TNETD73XX_H_ */
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx_err.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h	2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,42 @@
++/******************************************************************************
++ * FILE PURPOSE:    TNETD73xx Error Definations Header File
++ ******************************************************************************
++ * FILE NAME:       tnetd73xx_err.h
++ *
++ * DESCRIPTION:     Error definations for TNETD73XX
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++ 
++#ifndef __TNETD73XX_ERR_H__
++#define __TNETD73XX_ERR_H__
++
++typedef enum TNETD73XX_ERR_t
++{
++    TNETD73XX_ERR_OK        = 0,    /* OK or SUCCESS */
++    TNETD73XX_ERR_ERROR     = -1,   /* Unspecified/Generic ERROR */
++
++    /* Pointers and args */
++    TNETD73XX_ERR_INVARG        = -2,   /* Invaild argument to the call */
++    TNETD73XX_ERR_NULLPTR       = -3,   /* NULL pointer */
++    TNETD73XX_ERR_BADPTR        = -4,   /* Bad (out of mem) pointer */
++
++    /* Memory issues */
++    TNETD73XX_ERR_ALLOC_FAIL    = -10,  /* allocation failed */
++    TNETD73XX_ERR_FREE_FAIL     = -11,  /* free failed */
++    TNETD73XX_ERR_MEM_CORRUPT   = -12,  /* corrupted memory */
++    TNETD73XX_ERR_BUF_LINK      = -13,  /* buffer linking failed */
++
++    /* Device issues */
++    TNETD73XX_ERR_DEVICE_TIMEOUT    = -20,  /* device timeout on read/write */
++    TNETD73XX_ERR_DEVICE_MALFUNC    = -21,  /* device malfunction */
++
++    TNETD73XX_ERR_INVID     = -30   /* Invalid ID */
++
++} TNETD73XX_ERR;
++
++#endif /* __TNETD73XX_ERR_H__ */
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h	2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,239 @@
++/******************************************************************************
++ * FILE PURPOSE:    TNETD73xx Misc modules API Header
++ ******************************************************************************
++ * FILE NAME:       tnetd73xx_misc.h
++ *
++ * DESCRIPTION:     Clock Control, Reset Control, Power Management, GPIO
++ *                  FSER Modules API 
++ *                  As per TNETD73xx specifications
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - Sharath Kumar     PSP TII  
++ * 14 Feb 03 - Anant Gole        PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifndef __TNETD73XX_MISC_H__
++#define __TNETD73XX_MISC_H__
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++ 
++typedef enum TNETD73XX_RESET_MODULE_tag
++{
++    RESET_MODULE_UART0      = 0,
++    RESET_MODULE_UART1      = 1,
++    RESET_MODULE_I2C        = 2,
++    RESET_MODULE_TIMER0     = 3,
++    RESET_MODULE_TIMER1     = 4,
++    RESET_MODULE_GPIO       = 6,
++    RESET_MODULE_ADSLSS     = 7,
++    RESET_MODULE_USBS       = 8,
++    RESET_MODULE_SAR        = 9,
++    RESET_MODULE_VDMA_VT    = 11,
++    RESET_MODULE_FSER       = 12,
++    RESET_MODULE_VLYNQ1     = 16,
++    RESET_MODULE_EMAC0      = 17,
++    RESET_MODULE_DMA        = 18,
++    RESET_MODULE_BIST       = 19,
++    RESET_MODULE_VLYNQ0     = 20,
++    RESET_MODULE_EMAC1      = 21,
++    RESET_MODULE_MDIO       = 22,
++    RESET_MODULE_ADSLSS_DSP = 23,
++    RESET_MODULE_EPHY       = 26
++} TNETD73XX_RESET_MODULE_T;
++
++typedef enum TNETD73XX_RESET_CTRL_tag
++{
++    IN_RESET        = 0,
++    OUT_OF_RESET
++} TNETD73XX_RESET_CTRL_T;
++
++typedef enum TNETD73XX_SYS_RST_MODE_tag
++{
++    RESET_SOC_WITH_MEMCTRL      = 1,    /* SW0 bit in SWRCR register */
++    RESET_SOC_WITHOUT_MEMCTRL   = 2     /* SW1 bit in SWRCR register */
++} TNETD73XX_SYS_RST_MODE_T;
++
++typedef enum TNETD73XX_SYS_RESET_STATUS_tag
++{
++    HARDWARE_RESET = 0,
++    SOFTWARE_RESET0,            /* Caused by writing 1 to SW0 bit in SWRCR register */
++    WATCHDOG_RESET,
++    SOFTWARE_RESET1             /* Caused by writing 1 to SW1 bit in SWRCR register */
++} TNETD73XX_SYS_RESET_STATUS_T;
++
++void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, 
++                                TNETD73XX_RESET_CTRL_T reset_ctrl);
++TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status(TNETD73XX_RESET_MODULE_T reset_module);
++void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode);
++TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status(void);
++                    
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++
++typedef enum TNETD73XX_POWER_MODULE_tag
++{
++    POWER_MODULE_USBSP      = 0,
++    POWER_MODULE_WDTP       = 1,
++    POWER_MODULE_UT0P       = 2,
++    POWER_MODULE_UT1P       = 3,
++    POWER_MODULE_IICP       = 4,
++    POWER_MODULE_VDMAP      = 5,
++    POWER_MODULE_GPIOP      = 6,
++    POWER_MODULE_VLYNQ1P    = 7,
++    POWER_MODULE_SARP       = 8,
++    POWER_MODULE_ADSLP      = 9,
++    POWER_MODULE_EMIFP      = 10,
++    POWER_MODULE_ADSPP      = 12,
++    POWER_MODULE_RAMP       = 13,
++    POWER_MODULE_ROMP       = 14,
++    POWER_MODULE_DMAP       = 15,
++    POWER_MODULE_BISTP      = 16,
++    POWER_MODULE_TIMER0P    = 18,
++    POWER_MODULE_TIMER1P    = 19,
++    POWER_MODULE_EMAC0P     = 20,
++    POWER_MODULE_EMAC1P     = 22,
++    POWER_MODULE_EPHYP      = 24,
++    POWER_MODULE_VLYNQ0P    = 27,
++} TNETD73XX_POWER_MODULE_T;
++
++typedef enum TNETD73XX_POWER_CTRL_tag
++{
++    POWER_CTRL_POWER_UP = 0,
++    POWER_CTRL_POWER_DOWN
++} TNETD73XX_POWER_CTRL_T;
++
++typedef enum TNETD73XX_SYS_POWER_MODE_tag
++{
++    GLOBAL_POWER_MODE_RUN       = 0,    /* All system is up */
++    GLOBAL_POWER_MODE_IDLE,             /* MIPS is power down, all peripherals working */
++    GLOBAL_POWER_MODE_STANDBY,          /* Chip in power down, but clock to ADSKL subsystem is running */
++    GLOBAL_POWER_MODE_POWER_DOWN        /* Total chip is powered down */
++} TNETD73XX_SYS_POWER_MODE_T;
++
++void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module,  TNETD73XX_POWER_CTRL_T power_ctrl);
++TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module);
++void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode);
++TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode(void);
++
++/*****************************************************************************
++ * Wakeup Control 
++ *****************************************************************************/
++
++typedef enum TNETD73XX_WAKEUP_INTERRUPT_tag
++{
++    WAKEUP_INT0 = 1,
++    WAKEUP_INT1 = 2,
++    WAKEUP_INT2 = 4,
++    WAKEUP_INT3 = 8
++} TNETD73XX_WAKEUP_INTERRUPT_T;
++
++typedef enum TNETD73XX_WAKEUP_CTRL_tag
++{
++    WAKEUP_DISABLED = 0,
++    WAKEUP_ENABLED
++} TNETD73XX_WAKEUP_CTRL_T;
++
++typedef enum TNETD73XX_WAKEUP_POLARITY_tag
++{
++    WAKEUP_ACTIVE_HIGH = 0,
++    WAKEUP_ACTIVE_LOW
++} TNETD73XX_WAKEUP_POLARITY_T;
++
++void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int, 
++                           TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl, 
++                           TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity);
++
++/*****************************************************************************
++ * FSER  Control 
++ *****************************************************************************/
++ 
++typedef enum TNETD73XX_FSER_MODE_tag
++{
++    FSER_I2C    = 0,
++    FSER_UART   = 1
++} TNETD73XX_FSER_MODE_T;
++
++void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode);
++
++/*****************************************************************************
++ * Clock Control 
++ *****************************************************************************/
++
++#define CLK_MHZ(x)    ( (x) * 1000000 )
++
++typedef enum TNETD73XX_CLKC_ID_tag
++{
++    CLKC_SYS = 0,
++    CLKC_MIPS,
++    CLKC_USB,
++    CLKC_ADSLSS
++} TNETD73XX_CLKC_ID_T;
++
++void tnetd73xx_clkc_init(__u32 afeclk, __u32 refclk, __u32 xtal3in);
++TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, __u32 output_freq);
++__u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id);
++
++/*****************************************************************************
++ * GPIO Control 
++ *****************************************************************************/
++
++typedef enum TNETD73XX_GPIO_PIN_tag
++{
++    GPIO_UART0_RD           = 0,
++    GPIO_UART0_TD           = 1,
++    GPIO_UART0_RTS          = 2,
++    GPIO_UART0_CTS          = 3,
++    GPIO_FSER_CLK           = 4,
++    GPIO_FSER_D             = 5,
++    GPIO_EXT_AFE_SCLK       = 6,
++    GPIO_EXT_AFE_TX_FS      = 7,
++    GPIO_EXT_AFE_TXD        = 8,
++    GPIO_EXT_AFE_RS_FS      = 9,
++    GPIO_EXT_AFE_RXD1       = 10,
++    GPIO_EXT_AFE_RXD0       = 11,
++    GPIO_EXT_AFE_CDIN       = 12,
++    GPIO_EXT_AFE_CDOUT      = 13,
++    GPIO_EPHY_SPEED100      = 14,
++    GPIO_EPHY_LINKON        = 15,
++    GPIO_EPHY_ACTIVITY      = 16,
++    GPIO_EPHY_FDUPLEX       = 17,
++    GPIO_EINT0              = 18,
++    GPIO_EINT1              = 19,
++    GPIO_MBSP0_TCLK         = 20,
++    GPIO_MBSP0_RCLK         = 21,
++    GPIO_MBSP0_RD           = 22,
++    GPIO_MBSP0_TD           = 23,
++    GPIO_MBSP0_RFS          = 24,
++    GPIO_MBSP0_TFS          = 25,
++    GPIO_MII_DIO            = 26,
++    GPIO_MII_DCLK           = 27,
++} TNETD73XX_GPIO_PIN_T;
++
++typedef enum TNETD73XX_GPIO_PIN_MODE_tag
++{
++    FUNCTIONAL_PIN = 0,
++    GPIO_PIN = 1
++} TNETD73XX_GPIO_PIN_MODE_T;
++
++typedef enum TNETD73XX_GPIO_PIN_DIRECTION_tag
++{
++    GPIO_OUTPUT_PIN = 0,
++    GPIO_INPUT_PIN = 1
++} TNETD73XX_GPIO_PIN_DIRECTION_T;
++ 
++void tnetd73xx_gpio_init(void);
++void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin, 
++                         TNETD73XX_GPIO_PIN_MODE_T pin_mode,
++                         TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction);
++void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value);
++int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin);
++
++/* TNETD73XX Revision */
++__u32 tnetd73xx_get_revision(void);
++
++#endif /* __TNETD73XX_MISC_H__ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq.h linux.dev/include/asm-mips/ar7/vlynq.h
+--- linux.old/include/asm-mips/ar7/vlynq.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq.h	2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,610 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**|                                ****                                  |**
++**|                                ****                                  |**
++**|                                ******o***                            |**
++**|                          ********_///_****                           |**
++**|                           ***** /_//_/ ****                          |**
++**|                            ** ** (__/ ****                           |**
++**|                                *********                             |**
++**|                                 ****                                 |**
++**|                                  ***                                 |**
++**|                                                                      |**
++**|     Copyright (c) 2003 Texas Instruments Incorporated                |**
++**|                        ALL RIGHTS RESERVED                           |**
++**|                                                                      |**
++**| Permission is hereby granted to licensees of Texas Instruments       |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products.     |**
++**| No other rights to reproduce, use, or disseminate this computer      |**
++**| program, whether in part or in whole, are granted.                   |**
++**|                                                                      |**
++**| TI makes no representation or warranties with respect to the         |**
++**| performance of this computer program, and specifically disclaims     |**
++**| any responsibility for any damages, special or consequential,        |**
++**| connected with the use of this program.                              |**
++**|                                                                      |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/*********************************************************************************
++ *  ------------------------------------------------------------------------------
++ *   Module      : vlynq_hal.h
++ *   Description :
++ *   This header file provides the set of functions exported by the 
++ *   VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
++ *  ------------------------------------------------------------------------------
++ *********************************************************************************/
++
++#ifndef _VLYNQ_HAL_H_
++#define _VLYNQ_HAL_H_
++
++/* Enable/Disable debug feature */
++#undef VLYNQ_DEBUG 
++
++#ifdef VLYNQ_DEBUG  /* This needs to be OS abstracted - for testing use vxworks/linux calls */
++#define debugPrint(format,args...)    
++#else 
++#define debugPrint(format,args...)  
++#endif
++
++ /* number of VLYNQ memory regions supported */
++#define VLYNQ_MAX_MEMORY_REGIONS 0x04
++  
++ /* Max.number of external interrupt inputs supported by VLYNQ module */
++#define VLYNQ_IVR_MAXIVR         0x08
++
++#define VLYNQ_CLK_DIV_MAX  0x08
++#define VLYNQ_CLK_DIV_MIN  0x01
++
++
++/*** the total number of entries allocated for ICB would be
++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
++#define VLYNQ_IVR_CHAIN_SLOTS 10
++
++
++/* Error defines */
++#define VLYNQ_SUCCESS               0
++
++#define VLYNQ_ERRCODE_BASE          0 /* Chosen by system */
++#define VLYNQ_INVALID_ARG          -(VLYNQ_ERRCODE_BASE+1)
++#define VLYNQ_INVALID_DRV_STATE    -(VLYNQ_ERRCODE_BASE+2)
++#define VLYNQ_INT_CONFIG_ERR       -(VLYNQ_ERRCODE_BASE+3)
++#define VLYNQ_LINK_DOWN            -(VLYNQ_ERRCODE_BASE+4)
++#define VLYNQ_MEMALLOC_FAIL        -(VLYNQ_ERRCODE_BASE+5)
++#define VLYNQ_ISR_NON_EXISTENT     -(VLYNQ_ERRCODE_BASE+6)
++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
++
++/* Vlynq Defines and Macros */
++
++#define VLYNQ_NUM_INT_BITS              32 /* 32 bit interrupt staus register */
++
++/* Base address of module */
++#define VLYNQ_BASE                      (pdev->module_base)
++
++#define VLYNQ_REMOTE_REGS_OFFSET        0x0080
++
++#define VLYNQ_REV_OFFSET                0x0000
++#define VLYNQ_CTRL_OFFSET               0x0004
++#define VLYNQ_STATUS_OFFSET             0x0008
++#define VLYNQ_INT_STAT_OFFSET           0x0010
++#define VLYNQ_INT_PEND_OFFSET           0x0014
++#define VLYNQ_INT_PTR_OFFSET            0x0018
++#define VLYNQ_TXMAP_OFFSET              0x001c
++
++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET    0x0020
++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET  0x0024
++
++#define VLYNQ_CHIP_VER_OFFSET           0x0040
++#define VLYNQ_IVR_REGS_OFFSET           0x0060
++
++#define VLYNQ_INT_PENDING_REG_PTR       0x14
++#define VLYNQ_R_INT_PENDING_REG_PTR     VLYNQ_REMOTE_REGS_OFFSET + 0x14
++
++#define VLYNQ_REV_REG       *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
++#define VLYNQ_CTRL_REG      *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
++#define VLYNQ_STATUS_REG    *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
++#define VLYNQ_INT_STAT_REG  *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
++#define VLYNQ_INT_PEND_REG  *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
++#define VLYNQ_INT_PTR_REG   *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
++#define VLYNQ_TXMAP_REG     *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_SIZE_REG(map) \
++    *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
++    
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_OFFSET_REG(map) \
++    *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
++
++#define VLYNQ_CHIP_VER_REG  *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
++
++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
++#define VLYNQ_IVR_OFFSET(ivr)  \
++    (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
++
++#define VLYNQ_IVR_03TO00_REG  *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(0)) )
++#define VLYNQ_IVR_07TO04_REG  *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(4)) )
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++
++#define VLYNQ_IVR_INTEN(ivr)    (((unsigned int)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTTYPE(ivr)  (((unsigned int)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTPOL(ivr)   (((unsigned int)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTVEC(ivr)   (((unsigned int)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTALL(ivr)   (((unsigned int)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
++
++
++
++/*********************************
++ * Remote VLYNQ register set     *
++ *********************************/
++
++#define VLYNQ_R_REV_OFFSET              0x0080
++#define VLYNQ_R_CTRL_OFFSET             0x0084
++#define VLYNQ_R_STATUS_OFFSET           0x0088
++#define VLYNQ_R_INT_STAT_OFFSET         0x0090
++#define VLYNQ_R_INT_PEND_OFFSET         0x0094
++#define VLYNQ_R_INT_PTR_OFFSET          0x0098
++#define VLYNQ_R_TXMAP_OFFSET            0x009c
++
++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET  0x00A0
++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
++
++#define VLYNQ_R_CHIP_VER_OFFSET         0x00C0
++#define VLYNQ_R_IVR_REGS_OFFSET         0x00E0
++
++#define VLYNQ_R_REV_REG       *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) 
++#define VLYNQ_R_CTRL_REG      *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
++#define VLYNQ_R_STATUS_REG    *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
++#define VLYNQ_R_INT_STAT_REG  *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
++#define VLYNQ_R_INT_PEND_REG  *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
++#define VLYNQ_R_INT_PTR_REG   *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
++#define VLYNQ_R_TXMAP_REG     *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_SIZE_REG(map) \
++    *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
++    
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
++    *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
++
++#define VLYNQ_R_CHIP_VER_REG  *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
++
++#define VLYNQ_R_IVR_OFFSET(ivr)  \
++    (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
++ 
++
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++#define VLYNQ_R_IVR_03TO00_REG  *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(0)) )
++#define VLYNQ_R_IVR_07TO04_REG  *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(4)) )
++
++
++/****End of remote register set definition******/
++
++
++/*** Masks for individual register fields ***/
++
++#define VLYNQ_MODULE_ID_MASK        0xffff0000
++#define VLYNQ_MAJOR_REV_MASK        0x0000ff00
++#define VLYNQ_MINOR_REV_MASK        0x000000ff
++
++    
++#define VLYNQ_CTL_ILOOP_MASK        0x00000002
++#define VLYNQ_CTL_INT2CFG_MASK      0x00000080
++#define VLYNQ_CTL_INTVEC_MASK       0x00001f00
++#define VLYNQ_CTL_INTEN_MASK        0x00002000
++#define VLYNQ_CTL_INTLOCAL_MASK     0x00004000
++#define VLYNQ_CTL_CLKDIR_MASK       0x00008000
++#define VLYNQ_CTL_CLKDIV_MASK       0x00070000
++#define VLYNQ_CTL_MODE_MASK         0x00e00000
++
++
++#define VLYNQ_STS_LINK_MASK         0x00000001  /* Link is active */
++#define VLYNQ_STS_MPEND_MASK        0x00000002  /* Pending master requests */
++#define VLYNQ_STS_SPEND_MASK        0x00000004  /* Pending slave requests */
++#define VLYNQ_STS_NFEMPTY0_MASK     0x00000008  /* Master data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY1_MASK     0x00000010  /* Master command FIFO not empty */
++#define VLYNQ_STS_NFEMPTY2_MASK     0x00000020  /* Slave data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY3_MASK     0x00000040  /* Slave command FIFO not empty */
++#define VLYNQ_STS_LERROR_MASK       0x00000080  /* Local error, w/c */
++#define VLYNQ_STS_RERROR_MASK       0x00000100  /* remote error w/c */
++#define VLYNQ_STS_OFLOW_MASK        0x00000200
++#define VLYNQ_STS_IFLOW_MASK        0x00000400
++#define VLYNQ_STS_MODESUP_MASK      0x00E00000  /* Highest mode supported */
++#define VLYNQ_STS_SWIDTH_MASK       0x07000000  /* Used for reading the width of VLYNQ bus */
++#define VLYNQ_STS_DEBUG_MASK        0xE0000000 
++
++#define VLYNQ_CTL_INTVEC_SHIFT      0x08
++#define VLYNQ_CTL_INTEN_SHIFT       0x0D
++#define VLYNQ_CTL_INT2CFG_SHIFT     0x07
++#define VLYNQ_CTL_INTLOCAL_SHIFT    0x0E
++
++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK  0x7F80
++
++#define VLYNQ_CHIPVER_DEVREV_MASK   0xffff0000
++#define VLYNQ_CHIPVER_DEVID_MASK    0x0000ffff
++
++#define VLYNQ_IVR_INTEN_MASK        0x80
++#define VLYNQ_IVR_INTTYPE_MASK      0x40
++#define VLYNQ_IVR_INTPOL_MASK       0x20
++
++
++/**** Helper macros ****/
++
++#define VLYNQ_RESETCB(arg) \
++   if( pdev->reset_cb != NULL)   \
++   {                             \
++      (pdev->reset_cb)(pdev, (arg));  \
++   }
++    
++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
++#define VLYNQ_CTL_INTVEC(x)         (((x) & 31) << 8 )
++
++#define VLYNQ_INRANGE(x,hi,lo)      (((x) <= (hi)) && ((x) >= (lo)))
++#define VLYNQ_OUTRANGE(x,hi,lo)     (((x) > (hi)) || ((x) < (lo)))
++
++#define VLYNQ_ALIGN4(x)             (x)=(x)&(~3)   
++
++
++/*************************************
++ *             Enums                 *
++ *************************************/
++
++/* Initialization options define what operations are
++ * undertaken during vlynq module initialization */
++typedef enum
++{
++    /* Init host local memory regions.This allows
++     * local host access remote memory regions */
++    VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
++    /* Init host remote memory regions.This allows
++     * remote device access local memory regions */
++    VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
++    /* Init local interrupt config*/
++    VLYNQ_INIT_LOCAL_INTERRUPTS   =0x04,
++    /* Init remote interrupt config*/
++    VLYNQ_INIT_REMOTE_INTERRUPTS  =0x08,
++    /* Check link during initialization*/
++    VLYNQ_INIT_CHECK_LINK         =0x10,
++    /* configure clock during init */
++    VLYNQ_INIT_CONFIG_CLOCK       =0x20,
++    /* Clear errors during init */    
++    VLYNQ_INIT_CLEAR_ERRORS       =0x40,
++    /* All options */
++    VLYNQ_INIT_PERFORM_ALL        =0x7F
++}VLYNQ_INIT_OPTIONS;
++
++
++/* VLYNQ_DEV_TYPE identifies local or remote device */
++typedef enum
++{
++    VLYNQ_LOCAL_DVC  = 0,           /* vlynq local device (SOC's vlynq module) */
++    VLYNQ_REMOTE_DVC = 1            /* vlynq remote device (remote vlynq module) */
++}VLYNQ_DEV_TYPE;
++
++
++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
++typedef enum
++{
++    VLYNQ_CLK_SOURCE_NONE   = 0,    /* do not initialize clock generator*/
++    VLYNQ_CLK_SOURCE_LOCAL  = 1,    /* clock is generated by local machine  */
++    VLYNQ_CLK_SOURCE_REMOTE = 2     /* clock is generated by remote machine */
++}VLYNQ_CLK_SOURCE;
++
++
++/* VLYNQ_DRV_STATE indicates the current driver state */
++typedef enum
++{
++    VLYNQ_DRV_STATE_UNINIT = 0,     /* driver is uninitialized  */
++    VLYNQ_DRV_STATE_ININIT = 1,     /* VLYNQ is being initialized */
++    VLYNQ_DRV_STATE_RUN    = 2,     /* VLYNQ is running properly  */
++    VLYNQ_DRV_STATE_HOLD   = 3,     /* driver stopped temporarily */
++    VLYNQ_DRV_STATE_ERROR  = 4      /* driver stopped on unrecoverable error */
++}VLYNQ_DRV_STATE;
++
++
++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
++typedef enum
++{
++   VLYNQ_BUS_WIDTH_3 =  3,
++   VLYNQ_BUS_WIDTH_5 =  5,
++   VLYNQ_BUS_WIDTH_7 =  7,
++   VLYNQ_BUS_WIDTH_9 =  9
++}VLYNQ_BUS_WIDTH;
++
++
++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq 
++ * interrupts are processed by the host or passed on to the 
++ * remote device.
++ */
++typedef enum
++{
++    VLYNQ_INT_REMOTE = 0,   /* Interrupt packets sent to remote, intlocal=0 */
++    VLYNQ_INT_LOCAL  = 1    /* Interrupts are handled locally, intlocal=1 */
++}VLYNQ_LOCAL_INT_CONFIG;        
++
++
++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote 
++ * interrupts are to be handled by the SOC system ISR 
++ * or via the vlynq root ISR
++ */
++typedef enum 
++{
++    VLYNQ_INT_ROOT_ISR   = 0,   /* remote ints handled via vlynq root ISR */
++    VLYNQ_INT_SYSTEM_ISR = 1    /* remote ints handled via system ISR */
++}VLYNQ_REMOTE_INT_CONFIG;
++
++
++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
++typedef enum
++{
++    VLYNQ_INTR_ACTIVE_HIGH = 0,
++    VLYNQ_INTR_ACTIVE_LOW  = 1
++}VLYNQ_INTR_POLARITY;
++
++
++/* VLYNQ_INTR_TYPE  - vlynq interrupt type */
++typedef enum
++{
++    VLYNQ_INTR_LEVEL  = 0,
++    VLYNQ_INTR_PULSED = 1
++}VLYNQ_INTR_TYPE;
++
++
++/* VLYNQ_RESET_MODE - vlynq reset mode */
++typedef enum
++{
++   VLYNQ_RESET_ASSERT,      /* hold device in reset state */
++   VLYNQ_RESET_DEASSERT,    /* release device from reset state */
++   VLYNQ_RESET_INITFAIL,    /* handle the device in case driver initialization fails */
++   VLYNQ_RESET_LINKESTABLISH,  /* handle the device in case driver established link */
++   VLYNQ_RESET_INITFAIL2,   /* Driver initialization failed but VLYNQ link exist. */
++   VLYNQ_RESET_INITOK       /* Driver initialization finished OK. */
++}VLYNQ_RESET_MODE;
++ 
++
++
++/*************************************
++ *             Typedefs              *
++ *************************************/
++
++struct VLYNQ_DEV_t; /*forward declaration*/
++
++/*--------Function Pointers defintions -----------*/
++
++/* prototype for interrupt handler definition */
++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
++
++typedef void 
++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
++
++typedef void 
++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev,   /* This VLYNQ */
++                    VLYNQ_DEV_TYPE  aSrcDvc,    /* Event Cause -local/remote? */
++                    unsigned int  dwStatRegVal);      /* Value of the relevant status register */
++
++
++/*-------Structure Definitions------------*/
++
++typedef struct VLYNQ_MEMORY_MAP_t
++{
++    unsigned int Txmap;
++    unsigned int RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
++    unsigned int RxSize[VLYNQ_MAX_MEMORY_REGIONS];
++}VLYNQ_MEMORY_MAP;
++
++
++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
++ * settings in vlynq Control register  */ 
++typedef struct VLYNQ_INTERRUPT_CNTRL_t
++{
++    /* vlynq interrupts handled by host or remote - maps to 
++     * intLocal bit in vlynq control register */
++    VLYNQ_LOCAL_INT_CONFIG intLocal;
++
++    /* remote interrupts handled by vlynq isr or host system
++     * interrupt controller - maps to the int2Cfg in vlynq 
++     * control register */
++    VLYNQ_REMOTE_INT_CONFIG intRemote;
++    
++    /* bit in pending/set register used for module interrupts*/
++    unsigned int map_vector;
++    
++    /* used only if remote interrupts are to be handled by system ISR*/    
++    unsigned int intr_ptr;
++
++}VLYNQ_INTERRUPT_CNTRL;
++
++
++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this 
++ * table to identify the ISR to be invoked
++ */
++typedef struct VLYNQ_INTR_CNTRL_ICB_t
++{
++    VLYNQ_INTR_CNTRL_ISR            isr;    /* Clear errors during initialization */
++    void                            *arg1 ; /* Arg 1 for the ISR */
++    void                            *arg2 ; /* Arg 2 for the ISR */
++    void                            *arg3 ; /* Arg 3 for the ISR */
++    unsigned int  isrCount; /* number of ISR invocations so far */
++    struct VLYNQ_INTR_CNTRL_ICB_t   *next;
++}VLYNQ_INTR_CNTRL_ICB;
++
++/* overlay of vlynq register set */
++typedef struct VLYNQ_REG_SET_t
++{
++    unsigned int revision; /*offset : 0x00 */
++    unsigned int control;  /* 0x04*/
++    unsigned int status;   /* 0x08*/
++    unsigned int pad1;     /* 0x0c*/
++    unsigned int intStatus;   /*0x10*/
++    unsigned int intPending;  /*0x14*/
++    unsigned int intPtr;      /*0x18*/
++    unsigned int txMap;       /*0x1C*/ 
++    unsigned int rxSize1;     /*0x20*/
++    unsigned int rxOffset1;   /*0x24*/
++    unsigned int rxSize2;     /*0x28*/
++    unsigned int rxOffset2;   /*0x2C*/
++    unsigned int rxSize3;     /*0x30*/
++    unsigned int rxOffset3;   /*0x34*/
++    unsigned int rxSize4;     /*0x38*/
++    unsigned int rxOffset4;   /*0x3C*/
++    unsigned int chipVersion; /*0x40*/
++    unsigned int pad2[8];
++    unsigned int ivr30;       /*0x60*/
++    unsigned int ivr74;       /*0x64*/
++    unsigned int pad3[7];
++}VLYNQ_REG_SET;
++    
++
++typedef struct VLYNQ_DEV_t
++{
++    /** module index:1,2,3... used for debugging purposes */
++    unsigned int dev_idx; 
++    
++    /*VLYNQ module base address */
++    unsigned int module_base;
++   
++    /* clock source selection */
++    VLYNQ_CLK_SOURCE clk_source;
++   
++    /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
++    unsigned int  clk_div;
++   
++    /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
++    VLYNQ_DRV_STATE state;
++   
++    /* Valid VLYNQ bus width, filled by driver  */
++    VLYNQ_BUS_WIDTH width;
++   
++    /* local memory mapping   */
++    VLYNQ_MEMORY_MAP local_mem;
++   
++    /* remote memory mapping   */
++    VLYNQ_MEMORY_MAP remote_mem;
++   
++    /* Local module interrupt params */
++    VLYNQ_INTERRUPT_CNTRL  local_irq;
++   
++    /* remote module interrupt params */
++    VLYNQ_INTERRUPT_CNTRL  remote_irq;
++
++    /*** ICB related fields **/
++   
++    /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + 
++     * expansion slots for shared interrupts*/
++    VLYNQ_INTR_CNTRL_ICB  pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
++    VLYNQ_INTR_CNTRL_ICB  *freelist;
++   
++   /* table holding mapping between intVector and the bit position the interrupt
++    * is mapped to(mapVector)*/
++    char vector_map[32];
++   
++    /* user callback for vlynq events, NULL if unused */
++    VLYNQ_REPORT_CB        report_cb;    
++    
++   /* user callback for resetting/realeasing remote device */
++    VLYNQ_RESET_REMOTE     reset_cb;
++
++    /*** Handles provided for direct access to register set if need be
++     * Must be intialized to point to appropriate address during 
++     * vlynq_init */
++    volatile VLYNQ_REG_SET * local;
++    volatile VLYNQ_REG_SET * remote;
++
++    unsigned int  intCount; /* number of interrupts generated so far */
++    unsigned int  isrCount; /* number of ISR invocations so far */
++}VLYNQ_DEV;
++
++
++typedef struct VLYNQ_ISR_ARGS_t
++{
++    int irq;
++    void * arg;
++    void * regset;
++}VLYNQ_ISR_ARGS;
++
++
++/****************************************
++ *        Function Prototypes           *
++ * API exported by generic vlynq driver *
++ ****************************************/
++/* Initialization function */ 
++int vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
++
++/* Check vlynq link */
++unsigned int vlynq_link_check( VLYNQ_DEV * pdev);
++
++/* Set interrupt vector in local or remote device */
++int vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, 
++                                         unsigned int int_vector,
++                                         unsigned int map_vector, 
++                                         VLYNQ_DEV_TYPE dev,
++                                         VLYNQ_INTR_POLARITY pol,
++                                         VLYNQ_INTR_TYPE type);
++
++
++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++                                          unsigned int int_vector,
++                                          VLYNQ_DEV_TYPE dev,
++                                          unsigned int enable);
++
++unsigned int vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
++                                         unsigned int map_vector);
++
++int vlynq_install_isr( VLYNQ_DEV *pdev,
++                                unsigned int map_vector,
++                                VLYNQ_INTR_CNTRL_ISR isr,
++                                void *arg1, void *arg2, void *arg3);
++
++int vlynq_uninstall_isr( VLYNQ_DEV *pdev,
++                                  unsigned int map_vector,
++                                  void *arg1, void *arg2, void *arg3);
++
++
++void vlynq_root_isr(void *arg);
++
++void vlynq_delay(unsigned int clktime);
++
++/* The following functions, provide better granularity in setting
++ * interrupt parameters. (for better support of linux INT Controller)
++ * Note: The interrupt source is identified by "map_vector"- the bit 
++ * position in interrupt status register*/
++
++int vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
++                                        VLYNQ_DEV_TYPE dev,
++                                        unsigned int int_vector,
++                                        unsigned int map_vector);
++
++int vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
++                                          VLYNQ_DEV_TYPE dev,
++                                          unsigned int map_vector,
++                                          VLYNQ_INTR_POLARITY pol);
++
++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++                                           VLYNQ_DEV_TYPE dev_type,
++                                           unsigned int map_vector);
++
++int vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
++                                      VLYNQ_DEV_TYPE dev,
++                                      unsigned int map_vector,
++                                      VLYNQ_INTR_TYPE type);
++
++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, 
++                                       VLYNQ_DEV_TYPE dev_type,
++                                       unsigned int map_vector);
++
++int vlynq_interrupt_enable(VLYNQ_DEV* pdev,
++                                    VLYNQ_DEV_TYPE dev,
++                                    unsigned int map_vector);
++
++int vlynq_interrupt_disable(VLYNQ_DEV * pdev,
++                                     VLYNQ_DEV_TYPE dev,
++                                     unsigned int map_vector);
++                 
++
++              
++        
++
++#endif /* _VLYNQ_HAL_H_ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq_hal.h linux.dev/include/asm-mips/ar7/vlynq_hal.h
+--- linux.old/include/asm-mips/ar7/vlynq_hal.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq_hal.h	2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,606 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**|                                ****                                  |**
++**|                                ****                                  |**
++**|                                ******o***                            |**
++**|                          ********_///_****                           |**
++**|                           ***** /_//_/ ****                          |**
++**|                            ** ** (__/ ****                           |**
++**|                                *********                             |**
++**|                                 ****                                 |**
++**|                                  ***                                 |**
++**|                                                                      |**
++**|     Copyright (c) 2003 Texas Instruments Incorporated                |**
++**|                        ALL RIGHTS RESERVED                           |**
++**|                                                                      |**
++**| Permission is hereby granted to licensees of Texas Instruments       |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products.     |**
++**| No other rights to reproduce, use, or disseminate this computer      |**
++**| program, whether in part or in whole, are granted.                   |**
++**|                                                                      |**
++**| TI makes no representation or warranties with respect to the         |**
++**| performance of this computer program, and specifically disclaims     |**
++**| any responsibility for any damages, special or consequential,        |**
++**| connected with the use of this program.                              |**
++**|                                                                      |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/*********************************************************************************
++ *  ------------------------------------------------------------------------------
++ *   Module      : vlynq_hal.h
++ *   Description :
++ *   This header file provides the set of functions exported by the 
++ *   VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
++ *  ------------------------------------------------------------------------------
++ *********************************************************************************/
++
++#ifndef _VLYNQ_HAL_H_
++#define _VLYNQ_HAL_H_
++
++#include <asm/ar7/avalanche_types.h>
++#include <asm/ar7/vlynq_hal_params.h>
++
++#ifndef PRIVATE 
++#define PRIVATE static
++#endif
++
++#ifndef GLOBAL
++#define GLOBAL
++#endif
++
++/* Enable/Disable debug feature */
++#undef VLYNQ_DEBUG 
++
++#ifdef VLYNQ_DEBUG  /* This needs to be OS abstracted - for testing use vxworks/linux calls */
++#define debugPrint(format,args...)    
++#else 
++#define debugPrint(format,args...)  
++#endif
++
++/* Error defines */
++#define VLYNQ_SUCCESS               0
++
++#define VLYNQ_ERRCODE_BASE          0 /* Chosen by system */
++#define VLYNQ_INVALID_ARG          -(VLYNQ_ERRCODE_BASE+1)
++#define VLYNQ_INVALID_DRV_STATE    -(VLYNQ_ERRCODE_BASE+2)
++#define VLYNQ_INT_CONFIG_ERR       -(VLYNQ_ERRCODE_BASE+3)
++#define VLYNQ_LINK_DOWN            -(VLYNQ_ERRCODE_BASE+4)
++#define VLYNQ_MEMALLOC_FAIL        -(VLYNQ_ERRCODE_BASE+5)
++#define VLYNQ_ISR_NON_EXISTENT     -(VLYNQ_ERRCODE_BASE+6)
++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
++
++/* Vlynq Defines and Macros */
++
++#define VLYNQ_NUM_INT_BITS              32 /* 32 bit interrupt staus register */
++
++/* Base address of module */
++#define VLYNQ_BASE                      (pdev->module_base)
++
++#define VLYNQ_REMOTE_REGS_OFFSET        0x0080
++
++#define VLYNQ_REV_OFFSET                0x0000
++#define VLYNQ_CTRL_OFFSET               0x0004
++#define VLYNQ_STATUS_OFFSET             0x0008
++#define VLYNQ_INT_STAT_OFFSET           0x0010
++#define VLYNQ_INT_PEND_OFFSET           0x0014
++#define VLYNQ_INT_PTR_OFFSET            0x0018
++#define VLYNQ_TXMAP_OFFSET              0x001c
++
++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET    0x0020
++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET  0x0024
++
++#define VLYNQ_CHIP_VER_OFFSET           0x0040
++#define VLYNQ_IVR_REGS_OFFSET           0x0060
++
++#define VLYNQ_INT_PENDING_REG_PTR       0x14
++#define VLYNQ_R_INT_PENDING_REG_PTR     VLYNQ_REMOTE_REGS_OFFSET + 0x14
++
++#define VLYNQ_REV_REG       *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
++#define VLYNQ_CTRL_REG      *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
++#define VLYNQ_STATUS_REG    *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
++#define VLYNQ_INT_STAT_REG  *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
++#define VLYNQ_INT_PEND_REG  *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
++#define VLYNQ_INT_PTR_REG   *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
++#define VLYNQ_TXMAP_REG     *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_SIZE_REG(map) \
++    *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
++    
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_OFFSET_REG(map) \
++    *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
++
++#define VLYNQ_CHIP_VER_REG  *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
++
++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
++#define VLYNQ_IVR_OFFSET(ivr)  \
++    (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
++
++#define VLYNQ_IVR_03TO00_REG  *((volatile UINT32*) (VLYNQ_IVR_OFFSET(0)) )
++#define VLYNQ_IVR_07TO04_REG  *((volatile UINT32*) (VLYNQ_IVR_OFFSET(4)) )
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++
++#define VLYNQ_IVR_INTEN(ivr)    (((UINT32)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTTYPE(ivr)  (((UINT32)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTPOL(ivr)   (((UINT32)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTVEC(ivr)   (((UINT32)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTALL(ivr)   (((UINT32)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
++
++
++
++/*********************************
++ * Remote VLYNQ register set     *
++ *********************************/
++
++#define VLYNQ_R_REV_OFFSET              0x0080
++#define VLYNQ_R_CTRL_OFFSET             0x0084
++#define VLYNQ_R_STATUS_OFFSET           0x0088
++#define VLYNQ_R_INT_STAT_OFFSET         0x0090
++#define VLYNQ_R_INT_PEND_OFFSET         0x0094
++#define VLYNQ_R_INT_PTR_OFFSET          0x0098
++#define VLYNQ_R_TXMAP_OFFSET            0x009c
++
++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET  0x00A0
++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
++
++#define VLYNQ_R_CHIP_VER_OFFSET         0x00C0
++#define VLYNQ_R_IVR_REGS_OFFSET         0x00E0
++
++#define VLYNQ_R_REV_REG       *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) 
++#define VLYNQ_R_CTRL_REG      *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
++#define VLYNQ_R_STATUS_REG    *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
++#define VLYNQ_R_INT_STAT_REG  *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
++#define VLYNQ_R_INT_PEND_REG  *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
++#define VLYNQ_R_INT_PTR_REG   *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
++#define VLYNQ_R_TXMAP_REG     *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_SIZE_REG(map) \
++    *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
++    
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
++    *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
++
++#define VLYNQ_R_CHIP_VER_REG  *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
++
++#define VLYNQ_R_IVR_OFFSET(ivr)  \
++    (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
++ 
++
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++#define VLYNQ_R_IVR_03TO00_REG  *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(0)) )
++#define VLYNQ_R_IVR_07TO04_REG  *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(4)) )
++
++
++/****End of remote register set definition******/
++
++
++/*** Masks for individual register fields ***/
++
++#define VLYNQ_MODULE_ID_MASK        0xffff0000
++#define VLYNQ_MAJOR_REV_MASK        0x0000ff00
++#define VLYNQ_MINOR_REV_MASK        0x000000ff
++
++    
++#define VLYNQ_CTL_ILOOP_MASK        0x00000002
++#define VLYNQ_CTL_INT2CFG_MASK      0x00000080
++#define VLYNQ_CTL_INTVEC_MASK       0x00001f00
++#define VLYNQ_CTL_INTEN_MASK        0x00002000
++#define VLYNQ_CTL_INTLOCAL_MASK     0x00004000
++#define VLYNQ_CTL_CLKDIR_MASK       0x00008000
++#define VLYNQ_CTL_CLKDIV_MASK       0x00070000
++#define VLYNQ_CTL_MODE_MASK         0x00e00000
++
++
++#define VLYNQ_STS_LINK_MASK         0x00000001  /* Link is active */
++#define VLYNQ_STS_MPEND_MASK        0x00000002  /* Pending master requests */
++#define VLYNQ_STS_SPEND_MASK        0x00000004  /* Pending slave requests */
++#define VLYNQ_STS_NFEMPTY0_MASK     0x00000008  /* Master data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY1_MASK     0x00000010  /* Master command FIFO not empty */
++#define VLYNQ_STS_NFEMPTY2_MASK     0x00000020  /* Slave data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY3_MASK     0x00000040  /* Slave command FIFO not empty */
++#define VLYNQ_STS_LERROR_MASK       0x00000080  /* Local error, w/c */
++#define VLYNQ_STS_RERROR_MASK       0x00000100  /* remote error w/c */
++#define VLYNQ_STS_OFLOW_MASK        0x00000200
++#define VLYNQ_STS_IFLOW_MASK        0x00000400
++#define VLYNQ_STS_MODESUP_MASK      0x00E00000  /* Highest mode supported */
++#define VLYNQ_STS_SWIDTH_MASK       0x07000000  /* Used for reading the width of VLYNQ bus */
++#define VLYNQ_STS_DEBUG_MASK        0xE0000000 
++
++#define VLYNQ_CTL_INTVEC_SHIFT      0x08
++#define VLYNQ_CTL_INTEN_SHIFT       0x0D
++#define VLYNQ_CTL_INT2CFG_SHIFT     0x07
++#define VLYNQ_CTL_INTLOCAL_SHIFT    0x0E
++
++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK  0x7F80
++
++#define VLYNQ_CHIPVER_DEVREV_MASK   0xffff0000
++#define VLYNQ_CHIPVER_DEVID_MASK    0x0000ffff
++
++#define VLYNQ_IVR_INTEN_MASK        0x80
++#define VLYNQ_IVR_INTTYPE_MASK      0x40
++#define VLYNQ_IVR_INTPOL_MASK       0x20
++
++
++/**** Helper macros ****/
++
++#define VLYNQ_RESETCB(arg) \
++   if( pdev->reset_cb != NULL)   \
++   {                             \
++      (pdev->reset_cb)(pdev, (arg));  \
++   }
++    
++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
++#define VLYNQ_CTL_INTVEC(x)         (((x) & 31) << 8 )
++
++#define VLYNQ_INRANGE(x,hi,lo)      (((x) <= (hi)) && ((x) >= (lo)))
++#define VLYNQ_OUTRANGE(x,hi,lo)     (((x) > (hi)) || ((x) < (lo)))
++
++#define VLYNQ_ALIGN4(x)             (x)=(x)&(~3)   
++
++
++/*************************************
++ *             Enums                 *
++ *************************************/
++
++/* Initialization options define what operations are
++ * undertaken during vlynq module initialization */
++typedef enum
++{
++    /* Init host local memory regions.This allows
++     * local host access remote memory regions */
++    VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
++    /* Init host remote memory regions.This allows
++     * remote device access local memory regions */
++    VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
++    /* Init local interrupt config*/
++    VLYNQ_INIT_LOCAL_INTERRUPTS   =0x04,
++    /* Init remote interrupt config*/
++    VLYNQ_INIT_REMOTE_INTERRUPTS  =0x08,
++    /* Check link during initialization*/
++    VLYNQ_INIT_CHECK_LINK         =0x10,
++    /* configure clock during init */
++    VLYNQ_INIT_CONFIG_CLOCK       =0x20,
++    /* Clear errors during init */    
++    VLYNQ_INIT_CLEAR_ERRORS       =0x40,
++    /* All options */
++    VLYNQ_INIT_PERFORM_ALL        =0x7F
++}VLYNQ_INIT_OPTIONS;
++
++
++/* VLYNQ_DEV_TYPE identifies local or remote device */
++typedef enum
++{
++    VLYNQ_LOCAL_DVC  = 0,           /* vlynq local device (SOC's vlynq module) */
++    VLYNQ_REMOTE_DVC = 1            /* vlynq remote device (remote vlynq module) */
++}VLYNQ_DEV_TYPE;
++
++
++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
++typedef enum
++{
++    VLYNQ_CLK_SOURCE_NONE   = 0,    /* do not initialize clock generator*/
++    VLYNQ_CLK_SOURCE_LOCAL  = 1,    /* clock is generated by local machine  */
++    VLYNQ_CLK_SOURCE_REMOTE = 2     /* clock is generated by remote machine */
++}VLYNQ_CLK_SOURCE;
++
++
++/* VLYNQ_DRV_STATE indicates the current driver state */
++typedef enum
++{
++    VLYNQ_DRV_STATE_UNINIT = 0,     /* driver is uninitialized  */
++    VLYNQ_DRV_STATE_ININIT = 1,     /* VLYNQ is being initialized */
++    VLYNQ_DRV_STATE_RUN    = 2,     /* VLYNQ is running properly  */
++    VLYNQ_DRV_STATE_HOLD   = 3,     /* driver stopped temporarily */
++    VLYNQ_DRV_STATE_ERROR  = 4      /* driver stopped on unrecoverable error */
++}VLYNQ_DRV_STATE;
++
++
++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
++typedef enum
++{
++   VLYNQ_BUS_WIDTH_3 =  3,
++   VLYNQ_BUS_WIDTH_5 =  5,
++   VLYNQ_BUS_WIDTH_7 =  7,
++   VLYNQ_BUS_WIDTH_9 =  9
++}VLYNQ_BUS_WIDTH;
++
++
++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq 
++ * interrupts are processed by the host or passed on to the 
++ * remote device.
++ */
++typedef enum
++{
++    VLYNQ_INT_REMOTE = 0,   /* Interrupt packets sent to remote, intlocal=0 */
++    VLYNQ_INT_LOCAL  = 1    /* Interrupts are handled locally, intlocal=1 */
++}VLYNQ_LOCAL_INT_CONFIG;        
++
++
++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote 
++ * interrupts are to be handled by the SOC system ISR 
++ * or via the vlynq root ISR
++ */
++typedef enum 
++{
++    VLYNQ_INT_ROOT_ISR   = 0,   /* remote ints handled via vlynq root ISR */
++    VLYNQ_INT_SYSTEM_ISR = 1    /* remote ints handled via system ISR */
++}VLYNQ_REMOTE_INT_CONFIG;
++
++
++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
++typedef enum
++{
++    VLYNQ_INTR_ACTIVE_HIGH = 0,
++    VLYNQ_INTR_ACTIVE_LOW  = 1
++}VLYNQ_INTR_POLARITY;
++
++
++/* VLYNQ_INTR_TYPE  - vlynq interrupt type */
++typedef enum
++{
++    VLYNQ_INTR_LEVEL  = 0,
++    VLYNQ_INTR_PULSED = 1
++}VLYNQ_INTR_TYPE;
++
++
++/* VLYNQ_RESET_MODE - vlynq reset mode */
++typedef enum
++{
++   VLYNQ_RESET_ASSERT,      /* hold device in reset state */
++   VLYNQ_RESET_DEASSERT,    /* release device from reset state */
++   VLYNQ_RESET_INITFAIL,    /* handle the device in case driver initialization fails */
++   VLYNQ_RESET_LINKESTABLISH,  /* handle the device in case driver established link */
++   VLYNQ_RESET_INITFAIL2,   /* Driver initialization failed but VLYNQ link exist. */
++   VLYNQ_RESET_INITOK       /* Driver initialization finished OK. */
++}VLYNQ_RESET_MODE;
++ 
++
++
++/*************************************
++ *             Typedefs              *
++ *************************************/
++
++struct VLYNQ_DEV_t; /*forward declaration*/
++
++/*--------Function Pointers defintions -----------*/
++
++/* prototype for interrupt handler definition */
++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
++
++typedef void 
++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
++
++typedef void 
++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev,   /* This VLYNQ */
++                    VLYNQ_DEV_TYPE  aSrcDvc,    /* Event Cause -local/remote? */
++                    UINT32  dwStatRegVal);      /* Value of the relevant status register */
++
++
++/*-------Structure Definitions------------*/
++
++typedef struct VLYNQ_MEMORY_MAP_t
++{
++    UINT32 Txmap;
++    UINT32 RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
++    UINT32 RxSize[VLYNQ_MAX_MEMORY_REGIONS];
++}VLYNQ_MEMORY_MAP;
++
++
++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
++ * settings in vlynq Control register  */ 
++typedef struct VLYNQ_INTERRUPT_CNTRL_t
++{
++    /* vlynq interrupts handled by host or remote - maps to 
++     * intLocal bit in vlynq control register */
++    VLYNQ_LOCAL_INT_CONFIG intLocal;
++
++    /* remote interrupts handled by vlynq isr or host system
++     * interrupt controller - maps to the int2Cfg in vlynq 
++     * control register */
++    VLYNQ_REMOTE_INT_CONFIG intRemote;
++    
++    /* bit in pending/set register used for module interrupts*/
++    UINT32 map_vector;
++    
++    /* used only if remote interrupts are to be handled by system ISR*/    
++    UINT32 intr_ptr;
++
++}VLYNQ_INTERRUPT_CNTRL;
++
++
++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this 
++ * table to identify the ISR to be invoked
++ */
++typedef struct VLYNQ_INTR_CNTRL_ICB_t
++{
++    VLYNQ_INTR_CNTRL_ISR            isr;    /* Clear errors during initialization */
++    void                            *arg1 ; /* Arg 1 for the ISR */
++    void                            *arg2 ; /* Arg 2 for the ISR */
++    void                            *arg3 ; /* Arg 3 for the ISR */
++    UINT32  isrCount; /* number of ISR invocations so far */
++    struct VLYNQ_INTR_CNTRL_ICB_t   *next;
++}VLYNQ_INTR_CNTRL_ICB;
++
++/* overlay of vlynq register set */
++typedef struct VLYNQ_REG_SET_t
++{
++    UINT32 revision; /*offset : 0x00 */
++    UINT32 control;  /* 0x04*/
++    UINT32 status;   /* 0x08*/
++    UINT32 pad1;     /* 0x0c*/
++    UINT32 intStatus;   /*0x10*/
++    UINT32 intPending;  /*0x14*/
++    UINT32 intPtr;      /*0x18*/
++    UINT32 txMap;       /*0x1C*/ 
++    UINT32 rxSize1;     /*0x20*/
++    UINT32 rxOffset1;   /*0x24*/
++    UINT32 rxSize2;     /*0x28*/
++    UINT32 rxOffset2;   /*0x2C*/
++    UINT32 rxSize3;     /*0x30*/
++    UINT32 rxOffset3;   /*0x34*/
++    UINT32 rxSize4;     /*0x38*/
++    UINT32 rxOffset4;   /*0x3C*/
++    UINT32 chipVersion; /*0x40*/
++    UINT32 pad2[8];
++    UINT32 ivr30;       /*0x60*/
++    UINT32 ivr74;       /*0x64*/
++    UINT32 pad3[7];
++}VLYNQ_REG_SET;
++    
++
++typedef struct VLYNQ_DEV_t
++{
++    /** module index:1,2,3... used for debugging purposes */
++    UINT32 dev_idx; 
++    
++    /*VLYNQ module base address */
++    UINT32 module_base;
++   
++    /* clock source selection */
++    VLYNQ_CLK_SOURCE clk_source;
++   
++    /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
++    UINT32  clk_div;
++   
++    /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
++    VLYNQ_DRV_STATE state;
++   
++    /* Valid VLYNQ bus width, filled by driver  */
++    VLYNQ_BUS_WIDTH width;
++   
++    /* local memory mapping   */
++    VLYNQ_MEMORY_MAP local_mem;
++   
++    /* remote memory mapping   */
++    VLYNQ_MEMORY_MAP remote_mem;
++   
++    /* Local module interrupt params */
++    VLYNQ_INTERRUPT_CNTRL  local_irq;
++   
++    /* remote module interrupt params */
++    VLYNQ_INTERRUPT_CNTRL  remote_irq;
++
++    /*** ICB related fields **/
++   
++    /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + 
++     * expansion slots for shared interrupts*/
++    VLYNQ_INTR_CNTRL_ICB  pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
++    VLYNQ_INTR_CNTRL_ICB  *freelist;
++   
++   /* table holding mapping between intVector and the bit position the interrupt
++    * is mapped to(mapVector)*/
++    INT8 vector_map[32];
++   
++    /* user callback for vlynq events, NULL if unused */
++    VLYNQ_REPORT_CB        report_cb;    
++    
++   /* user callback for resetting/realeasing remote device */
++    VLYNQ_RESET_REMOTE     reset_cb;
++
++    /*** Handles provided for direct access to register set if need be
++     * Must be intialized to point to appropriate address during 
++     * vlynq_init */
++    volatile VLYNQ_REG_SET * local;
++    volatile VLYNQ_REG_SET * remote;
++
++    UINT32  intCount; /* number of interrupts generated so far */
++    UINT32  isrCount; /* number of ISR invocations so far */
++}VLYNQ_DEV;
++
++
++typedef struct VLYNQ_ISR_ARGS_t
++{
++    int irq;
++    void * arg;
++    void * regset;
++}VLYNQ_ISR_ARGS;
++
++
++/****************************************
++ *        Function Prototypes           *
++ * API exported by generic vlynq driver *
++ ****************************************/
++/* Initialization function */ 
++GLOBAL INT32 vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
++
++/* Check vlynq link */
++GLOBAL UINT32 vlynq_link_check( VLYNQ_DEV * pdev);
++
++/* Set interrupt vector in local or remote device */
++GLOBAL INT32 vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, 
++                                         UINT32 int_vector,
++                                         UINT32 map_vector, 
++                                         VLYNQ_DEV_TYPE dev,
++                                         VLYNQ_INTR_POLARITY pol,
++                                         VLYNQ_INTR_TYPE type);
++
++
++GLOBAL INT32 vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++                                          UINT32 int_vector,
++                                          VLYNQ_DEV_TYPE dev,
++                                          UINT32 enable);
++
++GLOBAL UINT32 vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
++                                         UINT32 map_vector);
++
++GLOBAL INT32 vlynq_install_isr( VLYNQ_DEV *pdev,
++                                UINT32 map_vector,
++                                VLYNQ_INTR_CNTRL_ISR isr,
++                                void *arg1, void *arg2, void *arg3);
++
++GLOBAL INT32 vlynq_uninstall_isr( VLYNQ_DEV *pdev,
++                                  UINT32 map_vector,
++                                  void *arg1, void *arg2, void *arg3);
++
++
++GLOBAL void vlynq_root_isr(void *arg);
++
++GLOBAL void vlynq_delay(UINT32 clktime);
++
++/* The following functions, provide better granularity in setting
++ * interrupt parameters. (for better support of linux INT Controller)
++ * Note: The interrupt source is identified by "map_vector"- the bit 
++ * position in interrupt status register*/
++
++GLOBAL INT32 vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
++                                        VLYNQ_DEV_TYPE dev,
++                                        UINT32 int_vector,
++                                        UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
++                                          VLYNQ_DEV_TYPE dev,
++                                          UINT32 map_vector,
++                                          VLYNQ_INTR_POLARITY pol);
++
++GLOBAL INT32 vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++                                           VLYNQ_DEV_TYPE dev_type,
++                                           UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
++                                      VLYNQ_DEV_TYPE dev,
++                                      UINT32 map_vector,
++                                      VLYNQ_INTR_TYPE type);
++
++GLOBAL INT32 vlynq_interrupt_get_type( VLYNQ_DEV *pdev, 
++                                       VLYNQ_DEV_TYPE dev_type,
++                                       UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_enable(VLYNQ_DEV* pdev,
++                                    VLYNQ_DEV_TYPE dev,
++                                    UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_disable(VLYNQ_DEV * pdev,
++                                     VLYNQ_DEV_TYPE dev,
++                                     UINT32 map_vector);
++                 
++
++              
++        
++
++#endif /* _VLYNQ_HAL_H_ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq_hal_params.h linux.dev/include/asm-mips/ar7/vlynq_hal_params.h
+--- linux.old/include/asm-mips/ar7/vlynq_hal_params.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq_hal_params.h	2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,50 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**|                                ****                                  |**
++**|                                ****                                  |**
++**|                                ******o***                            |**
++**|                          ********_///_****                           |**
++**|                           ***** /_//_/ ****                          |**
++**|                            ** ** (__/ ****                           |**
++**|                                *********                             |**
++**|                                 ****                                 |**
++**|                                  ***                                 |**
++**|                                                                      |**
++**|     Copyright (c) 2003 Texas Instruments Incorporated                |**
++**|                        ALL RIGHTS RESERVED                           |**
++**|                                                                      |**
++**| Permission is hereby granted to licensees of Texas Instruments       |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products.     |**
++**| No other rights to reproduce, use, or disseminate this computer      |**
++**| program, whether in part or in whole, are granted.                   |**
++**|                                                                      |**
++**| TI makes no representation or warranties with respect to the         |**
++**| performance of this computer program, and specifically disclaims     |**
++**| any responsibility for any damages, special or consequential,        |**
++**| connected with the use of this program.                              |**
++**|                                                                      |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/* This file defines Vlynq module parameters*/
++
++#ifndef _VLYNQ_HAL_PARAMS_H
++#define _VLYNQ_HAL_PARAMS_H
++
++ /* number of VLYNQ memory regions supported */
++#define VLYNQ_MAX_MEMORY_REGIONS 0x04
++  
++ /* Max.number of external interrupt inputs supported by VLYNQ module */
++#define VLYNQ_IVR_MAXIVR         0x08
++
++#define VLYNQ_CLK_DIV_MAX  0x08
++#define VLYNQ_CLK_DIV_MIN  0x01
++
++
++/*** the total number of entries allocated for ICB would be
++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
++#define VLYNQ_IVR_CHAIN_SLOTS 10
++
++
++#endif /* _VLYNQ_HAL_PARAMS_H */
+diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h
+--- linux.old/include/asm-mips/io.h	2003-08-25 13:44:43.000000000 +0200
++++ linux.dev/include/asm-mips/io.h	2005-11-10 01:14:16.400733500 +0100
+@@ -61,9 +61,9 @@
+  * Change "struct page" to physical address.
+  */
+ #ifdef CONFIG_64BIT_PHYS_ADDR
+-#define page_to_phys(page)	((u64)(page - mem_map) << PAGE_SHIFT)
++#define page_to_phys(page)	(((u64)(page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
+ #else
+-#define page_to_phys(page)	((page - mem_map) << PAGE_SHIFT)
++#define page_to_phys(page)	(((page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
+ #endif
+ 
+ #define IO_SPACE_LIMIT 0xffff
+diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h
+--- linux.old/include/asm-mips/irq.h	2003-08-25 13:44:43.000000000 +0200
++++ linux.dev/include/asm-mips/irq.h	2005-11-10 01:12:43.950955750 +0100
+@@ -14,7 +14,20 @@
+ #include <linux/config.h>
+ #include <linux/linkage.h>
+ 
++#ifdef CONFIG_AR7
++/* MIPS   has 8 irqs
++ * AR7    has 40 primary and 32 secondary irqs
++ * vlynq0 has 32 irqs
++ * vlynq1 has 32 irqs
++ */
++#ifdef CONFIG_AR7_VLYNQ
++#define NR_IRQS (80 + 32 * CONFIG_AR7_VLYNQ_PORTS)
++#else
++#define NR_IRQS 80
++#endif
++#else
+ #define NR_IRQS 128		/* Largest number of ints of all machines.  */
++#endif
+ 
+ #ifdef CONFIG_I8259
+ static inline int irq_cannonicalize(int irq)
+diff -urN linux.old/include/asm-mips/mips-boards/prom.h linux.dev/include/asm-mips/mips-boards/prom.h
+--- linux.old/include/asm-mips/mips-boards/prom.h	2001-09-09 19:43:02.000000000 +0200
++++ linux.dev/include/asm-mips/mips-boards/prom.h	2005-11-10 01:14:16.436735750 +0100
+@@ -33,7 +33,7 @@
+ extern void prom_init_cmdline(void);
+ extern void prom_meminit(void);
+ extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+-extern void prom_free_prom_memory (void);
++extern unsigned long prom_free_prom_memory (void);
+ extern void mips_display_message(const char *str);
+ extern void mips_display_word(unsigned int num);
+ extern int get_ethernet_addr(char *ethernet_addr);
+diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h
+--- linux.old/include/asm-mips/page.h	2004-02-18 14:36:32.000000000 +0100
++++ linux.dev/include/asm-mips/page.h	2005-11-10 01:14:16.436735750 +0100
+@@ -12,6 +12,7 @@
+ 
+ #include <linux/config.h>
+ #include <asm/break.h>
++#include <asm/addrspace.h>
+ 
+ #ifdef __KERNEL__
+ 
+@@ -129,7 +130,7 @@
+ 
+ #define __pa(x)		((unsigned long) (x) - PAGE_OFFSET)
+ #define __va(x)		((void *)((unsigned long) (x) + PAGE_OFFSET))
+-#define virt_to_page(kaddr)	(mem_map + (__pa(kaddr) >> PAGE_SHIFT))
++#define virt_to_page(kaddr)	(mem_map + ((__pa(kaddr)-PHYS_OFFSET) >> PAGE_SHIFT))
+ #define VALID_PAGE(page)	((page - mem_map) < max_mapnr)
+ 
+ #define VM_DATA_DEFAULT_FLAGS  (VM_READ | VM_WRITE | VM_EXEC | \
+diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgtable-32.h
+--- linux.old/include/asm-mips/pgtable-32.h	2004-02-18 14:36:32.000000000 +0100
++++ linux.dev/include/asm-mips/pgtable-32.h	2005-11-10 01:14:16.436735750 +0100
+@@ -108,7 +108,7 @@
+  * and a page entry and page directory to the page they refer to.
+  */
+ 
+-#ifdef CONFIG_CPU_VR41XX
++#if defined(CONFIG_CPU_VR41XX)
+ #define mk_pte(page, pgprot)                                            \
+ ({                                                                      \
+         pte_t   __pte;                                                  \
+@@ -123,13 +123,14 @@
+ ({									\
+ 	pte_t   __pte;							\
+ 									\
+-	pte_val(__pte) = ((phys_t)(page - mem_map) << PAGE_SHIFT) | \
+-	                 pgprot_val(pgprot);				\
++	pte_val(__pte) = (((phys_t)(page - mem_map) << PAGE_SHIFT) +    \
++			  PHYS_OFFSET) | pgprot_val(pgprot);            \
+ 									\
+ 	__pte;								\
+ })
+ #endif
+ 
++
+ static inline pte_t mk_pte_phys(phys_t physpage, pgprot_t pgprot)
+ {
+ #ifdef CONFIG_CPU_VR41XX
+@@ -175,12 +176,12 @@
+ 		set_pte(ptep, __pte(0));
+ }
+ 
+-#ifdef CONFIG_CPU_VR41XX
++#if defined(CONFIG_CPU_VR41XX)
+ #define pte_page(x)  (mem_map+((unsigned long)(((x).pte_low >> (PAGE_SHIFT+2)))))
+ #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot))
+ #else
+-#define pte_page(x)  (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT))))
+-#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot))
++#define pte_page(x)  (mem_map+((unsigned long)((((x).pte_low-PHYS_OFFSET) >> PAGE_SHIFT))))
++#define __mk_pte(page_nr,pgprot) __pte((((page_nr) << PAGE_SHIFT)+PHYS_OFFSET)|pgprot_val(pgprot))
+ #endif
+ 
+ #endif
+diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
+--- linux.old/include/asm-mips/serial.h	2005-01-19 15:10:12.000000000 +0100
++++ linux.dev/include/asm-mips/serial.h	2005-11-10 01:14:16.436735750 +0100
+@@ -65,6 +65,16 @@
+ 
+ #define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+ 
++#ifdef CONFIG_AR7
++#include <asm/ar7/ar7.h>
++#include <asm/ar7/avalanche_intc.h>
++#define AR7_SERIAL_PORT_DEFNS  \
++	{ 0, AR7_BASE_BAUD, AR7_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \
++	{ 0, AR7_BASE_BAUD, AR7_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS }, 
++#else 
++#define AR7_SERIAL_PORT_DEFNS
++#endif
++
+ #ifdef CONFIG_MIPS_JAZZ
+ #define _JAZZ_SERIAL_INIT(int, base)					\
+ 	{ .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,	\
+@@ -468,6 +478,7 @@
+ #endif
+ 
+ #define SERIAL_PORT_DFNS			\
++	AR7_SERIAL_PORT_DEFNS			\
+ 	ATLAS_SERIAL_PORT_DEFNS			\
+ 	AU1000_SERIAL_PORT_DEFNS		\
+ 	COBALT_SERIAL_PORT_DEFNS		\
diff --git a/openwrt/target/linux/ar7-2.4/patches/001-flash_map.patch b/openwrt/target/linux/ar7-2.4/patches/001-flash_map.patch
new file mode 100644
index 0000000..83bc103
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/patches/001-flash_map.patch
@@ -0,0 +1,307 @@
+diff -urN linux.old/drivers/mtd/maps/ar7-flash.c linux.dev/drivers/mtd/maps/ar7-flash.c
+--- linux.old/drivers/mtd/maps/ar7-flash.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/mtd/maps/ar7-flash.c	2005-07-22 04:35:26.624453992 +0200
+@@ -0,0 +1,267 @@
++/*
++ * $Id$
++ *
++ * Normal mappings of chips in physical memory
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/io.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/config.h>
++#include <linux/mtd/partitions.h>
++#include <linux/squashfs_fs.h>
++
++#define WINDOW_ADDR CONFIG_MTD_AR7_START
++#define WINDOW_SIZE CONFIG_MTD_AR7_LEN
++#define BUSWIDTH CONFIG_MTD_AR7_BUSWIDTH
++
++#include <asm/mips-boards/prom.h>
++extern char *prom_getenv(char *name);
++
++static int create_mtd_partitions(void);
++static void __exit ar7_mtd_cleanup(void);
++	
++#define MAX_NUM_PARTITIONS 5
++static struct mtd_partition ar7_partinfo[MAX_NUM_PARTITIONS];
++
++static struct mtd_info *ar7_mtd_info;
++
++__u8 ar7_read8(struct map_info *map, unsigned long ofs)
++{
++	return __raw_readb(map->map_priv_1 + ofs);
++}
++
++__u16 ar7_read16(struct map_info *map, unsigned long ofs)
++{
++	return __raw_readw(map->map_priv_1 + ofs);
++}
++
++__u32 ar7_read32(struct map_info *map, unsigned long ofs)
++{
++	return __raw_readl(map->map_priv_1 + ofs);
++}
++
++void ar7_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
++{
++	memcpy_fromio(to, map->map_priv_1 + from, len);
++}
++
++void ar7_write8(struct map_info *map, __u8 d, unsigned long adr)
++{
++	__raw_writeb(d, map->map_priv_1 + adr);
++	mb();
++}
++
++void ar7_write16(struct map_info *map, __u16 d, unsigned long adr)
++{
++	__raw_writew(d, map->map_priv_1 + adr);
++	mb();
++}
++
++void ar7_write32(struct map_info *map, __u32 d, unsigned long adr)
++{
++	__raw_writel(d, map->map_priv_1 + adr);
++	mb();
++}
++
++void ar7_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
++{
++	memcpy_toio(map->map_priv_1 + to, from, len);
++}
++
++struct map_info ar7_map = {
++	name: "Physically mapped flash",
++	size: WINDOW_SIZE,
++	buswidth: BUSWIDTH,
++	read8: ar7_read8,
++	read16: ar7_read16,
++	read32: ar7_read32,
++	copy_from: ar7_copy_from,
++	write8: ar7_write8,
++	write16: ar7_write16,
++	write32: ar7_write32,
++	copy_to: ar7_copy_to
++};
++
++int __init ar7_mtd_init(void)
++{
++	int partitions;
++	
++       	printk(KERN_NOTICE "ar7 flash device: 0x%lx at 0x%lx.\n", (unsigned long)WINDOW_SIZE, (unsigned long)WINDOW_ADDR);
++	ar7_map.map_priv_1 = (unsigned long)ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
++
++	if (!ar7_map.map_priv_1) {
++		printk("Failed to ioremap\n");
++		return -EIO;
++	}
++	
++	ar7_mtd_info = do_map_probe("cfi_probe", &ar7_map);
++	if (!ar7_mtd_info)
++	{
++		ar7_mtd_cleanup();
++		return -ENXIO;
++	}
++	
++	ar7_mtd_info->module = THIS_MODULE;
++
++	if (!(partitions = create_mtd_partitions()))
++		add_mtd_device(ar7_mtd_info);
++	else		
++		add_mtd_partitions(ar7_mtd_info, ar7_partinfo, partitions);
++
++	return 0;
++}
++
++static char *strdup(char *str)
++{
++	int n = strlen(str)+1;
++	char *s = kmalloc(n, GFP_KERNEL);
++	if (!s) return NULL;
++	return strcpy(s, str);
++}
++
++
++static int create_mtd_partitions(void)
++{
++	unsigned int offset;
++	unsigned int size;
++	unsigned int found = 0;
++	unsigned int p = 0;
++	unsigned char *flash_base;
++	unsigned char *flash_end;
++	char *env_ptr;
++	char *base_ptr;
++	char *end_ptr;
++	unsigned int adam2_size = 0x20000;
++	unsigned int config_offset = WINDOW_SIZE;
++	unsigned int rootfs_start = 0xe0000;
++
++	printk("Parsing ADAM2 partition map...\n");
++	
++	do {
++		char	env_name[20];
++
++		/* get base and end addresses of flash file system from environment */
++		sprintf(env_name, "mtd%1u", p);
++		printk("Looking for mtd device :%s:\n", env_name);
++
++		env_ptr = prom_getenv(env_name);
++		if(env_ptr == NULL) {
++			/* No more partitions to find */
++			break;
++		}
++
++		/* Extract the start and stop addresses of the partition */
++		base_ptr = strtok(env_ptr, ",");
++		end_ptr = strtok(NULL, ",");
++		if ((base_ptr == NULL) || (end_ptr == NULL)) {	
++			printk("ADAM2 partition error: Invalid %s start,end.\n", env_name);
++			break;
++		}
++
++		flash_base = (unsigned char*) simple_strtol(base_ptr, NULL, 0);
++		flash_end = (unsigned char*) simple_strtol(end_ptr, NULL, 0);
++		if((!flash_base) || (!flash_end)) {
++			printk("ADAM2 partition error: Invalid %s start,end.\n", env_name);
++			break;
++		}
++
++		offset = virt_to_bus(flash_base) - WINDOW_ADDR;
++		size = flash_end - flash_base;
++		printk("Found a %s image (0x%x), with size (0x%x).\n",env_name, offset, size);
++
++		
++		if (offset == 0) {
++			printk("Assuming adam2 size of 0x%x\n", size);
++			adam2_size = size; 			// boot loader
++		} else if (offset > 0x120000) {
++			if (config_offset > offset)
++				config_offset = offset;		// reserved at the end of the flash chip
++		} else if (offset > 0x30000) {
++			printk("Assuming default rootfs offset of 0x%x\n", offset);
++			rootfs_start = offset;			// probably root fs
++		}
++		
++		p++;
++	} while (p < MAX_NUM_PARTITIONS);
++	
++	p = 0;
++	
++	ar7_partinfo[p].name = strdup("adam2");
++	ar7_partinfo[p].offset = 0;
++	ar7_partinfo[p].size = adam2_size;
++	ar7_partinfo[p++].mask_flags = 0;
++
++	ar7_partinfo[p].name = strdup("linux");
++	ar7_partinfo[p].offset = adam2_size;
++	ar7_partinfo[p].size = config_offset - adam2_size;
++	ar7_partinfo[p++].mask_flags = 0;
++
++	if (ar7_read32(&ar7_map, adam2_size) == 0xfeedfa42) {
++		rootfs_start = ar7_read32(&ar7_map, adam2_size + 4) + adam2_size + 28;
++		printk("Setting new rootfs offset to %08x\n", rootfs_start);
++	}
++	
++	ar7_partinfo[p].name = strdup("rootfs");
++	ar7_partinfo[p].offset = rootfs_start;
++	ar7_partinfo[p].size = config_offset - rootfs_start;
++	
++	ar7_partinfo[p++].mask_flags = 0;
++
++	ar7_partinfo[p].name = strdup("config");
++	ar7_partinfo[p].offset = config_offset;
++	ar7_partinfo[p].size = WINDOW_SIZE - config_offset;
++	ar7_partinfo[p++].mask_flags = 0;
++
++	if (ar7_read32(&ar7_map, rootfs_start) == SQUASHFS_MAGIC) {
++		int newsize, newoffset;
++		squashfs_super_block sb;
++
++		ar7_copy_from(&ar7_map, &sb, rootfs_start, sizeof(sb));
++		printk("Squashfs detected (size = 0x%08x)\n", sb.bytes_used);
++		
++		newoffset = rootfs_start + sb.bytes_used;
++
++		if ((newoffset % ar7_mtd_info->erasesize) > 0)
++			newoffset += ar7_mtd_info->erasesize - (newoffset % ar7_mtd_info->erasesize);
++		
++		ar7_partinfo[p - 2].size = newoffset - rootfs_start;
++		
++		ar7_partinfo[p].name = strdup("OpenWrt");
++		ar7_partinfo[p].offset = newoffset;
++		ar7_partinfo[p].size = config_offset - newoffset;
++		ar7_partinfo[p++].mask_flags = 0;
++	} else {
++		printk("Unknown filesystem. Moving rootfs partition to next erase block");
++		if ((rootfs_start % ar7_mtd_info->erasesize) > 0) {
++			ar7_partinfo[p - 2].offset += ar7_mtd_info->erasesize - (rootfs_start % ar7_mtd_info->erasesize);
++			ar7_partinfo[p - 2].size -= ar7_mtd_info->erasesize - (rootfs_start % ar7_mtd_info->erasesize);
++		}
++	}
++
++	return p;
++}
++
++static void __exit ar7_mtd_cleanup(void)
++{
++	if (ar7_mtd_info) {
++		del_mtd_partitions(ar7_mtd_info);
++		del_mtd_device(ar7_mtd_info);
++		map_destroy(ar7_mtd_info);
++	}
++
++	if (ar7_map.map_priv_1) {
++		iounmap((void *)ar7_map.map_priv_1);
++		ar7_map.map_priv_1 = 0;
++	}
++}
++
++module_init(ar7_mtd_init);
++module_exit(ar7_mtd_cleanup);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Felix Fietkau");
++MODULE_DESCRIPTION("AR7 CFI map driver");
+diff -urN linux.old/drivers/mtd/maps/Config.in linux.dev/drivers/mtd/maps/Config.in
+--- linux.old/drivers/mtd/maps/Config.in	2005-07-21 05:36:32.414242296 +0200
++++ linux.dev/drivers/mtd/maps/Config.in	2005-07-21 06:29:04.067118232 +0200
+@@ -48,6 +48,21 @@
+ fi
+ 
+ if [ "$CONFIG_MIPS" = "y" ]; then
++    if [ "$CONFIG_AR7" = "y" ]; then
++      dep_tristate '  Flash chip mapping on Texas Instruments AR7' CONFIG_MTD_AR7 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS
++      dep_bool     '    Use defaults for Texas Instruments AR7' CONFIG_MTD_AR7_DEFAULTS $CONFIG_MTD_AR7
++      if [ "$CONFIG_MTD_AR7" = "y" -o "$CONFIG_MTD_AR7" = "m" ]; then
++         if [ "$CONFIG_MTD_AR7_DEFAULTS" = "y" ]; then
++            define_hex CONFIG_MTD_AR7_START 0x10000000
++            define_hex CONFIG_MTD_AR7_LEN 0x400000
++            define_int CONFIG_MTD_AR7_BUSWIDTH 2
++         else
++            hex '      Physical start address of flash mapping' CONFIG_MTD_AR7_START 0x10000000
++            hex '      Physical length of flash mapping' CONFIG_MTD_AR7_LEN 0x400000
++            int '      Bus width in octets' CONFIG_MTD_AR7_BUSWIDTH 2
++         fi
++      fi
++   fi
+    dep_tristate '  Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
+    dep_tristate '  Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
+    dep_tristate '  Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
+diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile
+--- linux.old/drivers/mtd/maps/Makefile	2005-07-21 05:36:32.414242296 +0200
++++ linux.dev/drivers/mtd/maps/Makefile	2005-07-21 06:56:33.265401984 +0200
+@@ -10,6 +10,7 @@
+ endif
+ 
+ # Chip mappings
++obj-$(CONFIG_MTD_AR7)		+= ar7-flash.o
+ obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
+ obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
+ obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
diff --git a/openwrt/target/linux/ar7-2.4/patches/002-led_driver.patch b/openwrt/target/linux/ar7-2.4/patches/002-led_driver.patch
new file mode 100644
index 0000000..81fe153
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/patches/002-led_driver.patch
@@ -0,0 +1,1915 @@
+diff -urN linux.dev/drivers/char/Config.in linux.dev2/drivers/char/Config.in
+--- linux.dev/drivers/char/Config.in	2005-10-21 17:02:20.199991500 +0200
++++ linux.dev2/drivers/char/Config.in	2005-10-21 18:03:44.541778750 +0200
+@@ -133,6 +133,10 @@
+       fi
+    fi
+ fi
++if [ "$CONFIG_AR7" = "y" ]; then
++   bool  'Enable LED support' CONFIG_AR7_LED
++fi
++
+ if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then
+    tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
+ fi
+diff -urN linux.dev/drivers/char/Makefile linux.dev2/drivers/char/Makefile
+--- linux.dev/drivers/char/Makefile	2005-10-21 17:02:20.199991500 +0200
++++ linux.dev2/drivers/char/Makefile	2005-10-21 18:03:44.541778750 +0200
+@@ -190,6 +190,12 @@
+   obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP)
+ endif
+ 
++#
++# Texas Intruments LED driver
++# 
++obj-$(CONFIG_AR7_LED) += avalanche_led/avalanche_led.o
++subdir-$(CONFIG_AR7_LED) += avalanche_led
++
+ obj-$(CONFIG_HIL) += hp_keyb.o
+ obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
+ obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
+diff -urN linux.dev/drivers/char/avalanche_led/Makefile linux.dev2/drivers/char/avalanche_led/Makefile
+--- linux.dev/drivers/char/avalanche_led/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev2/drivers/char/avalanche_led/Makefile	2005-10-21 18:03:44.513777000 +0200
+@@ -0,0 +1,23 @@
++# File: drivers/char/avalanche_led/Makefile
++#
++# Makefile for the Linux LED device driver.
++#
++
++
++O_TARGET := avalanche_led.o
++obj-m := avalanche_led.o
++list-multi      := avalanche_led.o
++
++EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7
++
++export-objs := ledmod.o leds.o
++
++avalanche_led-objs := ledmod.o gpio.o uartled.o leds.o
++
++include $(TOPDIR)/Rules.make
++
++avalanche_led.o:      $(avalanche_led-objs)
++	$(LD) -r -o $@ $(avalanche_led-objs)
++
++clean:
++	rm -f core *.o *.a *.s
+diff -urN linux.dev/drivers/char/avalanche_led/gpio.c linux.dev2/drivers/char/avalanche_led/gpio.c
+--- linux.dev/drivers/char/avalanche_led/gpio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev2/drivers/char/avalanche_led/gpio.c	2005-10-21 18:03:44.513777000 +0200
+@@ -0,0 +1,382 @@
++#include <linux/kernel.h>
++#include <asm/uaccess.h>
++#include <linux/spinlock.h>
++#include <linux/proc_fs.h>
++#include <linux/fs.h>
++#include <linux/timer.h>
++#include <linux/module.h>
++
++#include <asm/ar7/tnetd73xx_err.h>
++#include <asm/ar7/tnetd73xx_misc.h>
++#include <asm/ar7/ledapp.h>
++
++#define TRUE 1
++#define FALSE 0
++
++#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD
++
++#define AR7_RESET_FILE "led_mod/ar7reset"
++#define AR7_VERSION_FILE "led_mod/hardware_version"
++#define AR7_RESET_GPIO 11
++#define RESET_POLL_TIME 1
++#define RESET_HOLD_TIME 4
++#define NO_OF_LEDS	
++
++static struct proc_dir_entry *reset_file;
++static int res_state = 0;
++static int count;
++static struct timer_list *pTimer = NULL;
++static ssize_t proc_read_reset_fops(struct file *filp,
++                                    char *buf,size_t count , loff_t *offp);
++
++static ssize_t proc_read_hwversion_fops(struct file *filp,
++                                    char *buf,size_t count , loff_t *offp);
++
++struct file_operations reset_fops = {
++                                     read: proc_read_reset_fops
++                                   };
++struct file_operations hardware_version_fops = {
++                                     read: proc_read_hwversion_fops
++                                   };
++#endif
++
++static spinlock_t	device_lock;
++led_reg_t temp[15];
++
++static void gpio_led_on( unsigned long param )
++{
++	unsigned int flags;
++
++	spin_lock_irqsave(&device_lock, flags);
++
++	tnetd73xx_gpio_out(param,FALSE);
++	spin_unlock_irqrestore(&device_lock, flags);
++}
++
++static void gpio_led_off ( unsigned long param )
++{
++	unsigned int flags = 0x00;
++
++ 	spin_lock_irqsave(&device_lock, flags);
++
++	tnetd73xx_gpio_out(param,TRUE);
++	spin_unlock_irqrestore(&device_lock, flags);
++}
++
++static void gpio_led_init( unsigned long param)
++{
++	tnetd73xx_gpio_ctrl(param,GPIO_PIN,GPIO_OUTPUT_PIN);
++}
++
++static void board_gpio_reset(void)
++{
++	/* Initialize the link mask */
++	device_lock = SPIN_LOCK_UNLOCKED;
++	return;
++}
++
++#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD
++
++static ssize_t proc_read_hwversion_fops(struct file *filp, char *buf, 
++					size_t count, loff_t *offp)
++{
++	char line[8];
++  	int len = 0;
++  	if( *offp != 0 )
++  		return 0;
++
++	len = sprintf(line,  "%d%d.%d%d%d%d\n", tnetd73xx_gpio_in(20),
++			tnetd73xx_gpio_in(21), tnetd73xx_gpio_in(22),
++			tnetd73xx_gpio_in(23), tnetd73xx_gpio_in(24),
++		        tnetd73xx_gpio_in(25));
++  	
++	copy_to_user(buf, line, len);
++	*offp = len;
++	return len;
++}	
++
++static ssize_t proc_read_reset_fops(struct file *filp,
++                                 char *buf,size_t count , loff_t *offp)
++{
++  char * pdata = NULL;
++  char line[3];
++  int len = 0;
++  if( *offp != 0 )
++  	return 0;
++
++  pdata = buf;
++	len = sprintf(line,"%d\n", res_state );
++//wwzh
++//  res_state = 0;
++  copy_to_user(buf,line,len );
++	*offp = len;
++	return len;
++}
++
++static void reset_timer_func(unsigned long data)
++{
++//wwzh
++#if 0
++  	count = (tnetd73xx_gpio_in(AR7_RESET_GPIO) == 0) ? count + 1: 0;
++        if( count >= RESET_HOLD_TIME/RESET_POLL_TIME )
++#endif
++	if (tnetd73xx_gpio_in(AR7_RESET_GPIO) == 0)
++    		res_state = 1;
++	else
++		res_state = 0;
++	pTimer->expires = jiffies + HZ*RESET_POLL_TIME;
++	add_timer (pTimer);
++  return;
++}
++
++static void hardware_version_init(void)
++{
++   	static struct proc_dir_entry *hardware_version_file;
++  	hardware_version_file = create_proc_entry(AR7_VERSION_FILE, 0777, NULL);
++  	if(hardware_version_file == NULL)
++   		 return;
++  	
++	hardware_version_file->owner = THIS_MODULE;
++  	hardware_version_file->proc_fops = &hardware_version_fops;
++
++  	tnetd73xx_gpio_ctrl(20,GPIO_PIN,GPIO_INPUT_PIN);
++  	tnetd73xx_gpio_ctrl(21,GPIO_PIN,GPIO_INPUT_PIN);
++  	tnetd73xx_gpio_ctrl(22,GPIO_PIN,GPIO_INPUT_PIN);
++  	tnetd73xx_gpio_ctrl(23,GPIO_PIN,GPIO_INPUT_PIN);
++  	tnetd73xx_gpio_ctrl(24,GPIO_PIN,GPIO_INPUT_PIN);
++  	tnetd73xx_gpio_ctrl(25,GPIO_PIN,GPIO_INPUT_PIN);
++	
++	return;
++}
++
++static void reset_init(void)
++{
++  /* Create board reset proc file */
++  reset_file = create_proc_entry( AR7_RESET_FILE, 0777, NULL);
++  if( reset_file == NULL)
++    goto reset_file;
++  reset_file->owner = THIS_MODULE;
++  reset_file->proc_fops = &reset_fops;
++
++  /* Initialise GPIO 11 for input */
++  tnetd73xx_gpio_ctrl(AR7_RESET_GPIO,GPIO_PIN,GPIO_INPUT_PIN);
++
++  /* Create a timer which fires every seconds */
++  pTimer = kmalloc(sizeof(struct timer_list),GFP_KERNEL);
++	init_timer( pTimer );
++	pTimer->function = reset_timer_func;
++	pTimer->data = 0;
++  /* Start the timer */
++  reset_timer_func(0);
++  return ;
++
++  reset_file:
++    remove_proc_entry("AR7_RESET_FILE",NULL);
++	return;
++}
++#endif
++/*************wwzh****************/
++#if 1
++extern unsigned int sys_mod_state;
++extern unsigned int  wan_mod_state;
++extern unsigned int wlan_mod_state;
++void sys_led_init(void)
++{
++	tnetd73xx_gpio_ctrl(4, GPIO_PIN, GPIO_OUTPUT_PIN);
++	tnetd73xx_gpio_ctrl(5, GPIO_PIN, GPIO_OUTPUT_PIN);
++	tnetd73xx_gpio_ctrl(8, GPIO_PIN, GPIO_OUTPUT_PIN);
++
++	tnetd73xx_gpio_out(4, FALSE);
++	tnetd73xx_gpio_out(5, TRUE);
++	tnetd73xx_gpio_out(8, TRUE);
++	
++
++	sys_mod_state = 2;
++
++}
++void wan_led_init(void)
++{
++	
++	tnetd73xx_gpio_ctrl(2, GPIO_PIN, GPIO_OUTPUT_PIN);
++	tnetd73xx_gpio_ctrl(3, GPIO_PIN, GPIO_OUTPUT_PIN);
++	
++	tnetd73xx_gpio_out(2, FALSE);
++	tnetd73xx_gpio_out(3, FALSE);
++
++	wan_mod_state = 1;
++}
++//wwzh wireless
++#if 0
++void wlan_led_init(void)
++{
++	//unsigned long i = 0;	
++	tnetd73xx_gpio_ctrl(12, GPIO_PIN, GPIO_OUTPUT_PIN);
++	tnetd73xx_gpio_ctrl(13, GPIO_PIN, GPIO_OUTPUT_PIN);
++	
++	tnetd73xx_gpio_out(12, FALSE);
++	tnetd73xx_gpio_out(13, TRUE);
++	//for (i = 0; i < 0x20000000; i++);
++	wlan_mod_state = 1;
++}
++#endif
++
++#endif
++/*************end ****************/
++
++void board_gpio_init(void)
++{
++
++	board_gpio_reset();
++/**************wwzh*************/
++	sys_led_init();
++	wan_led_init();
++
++	//junzhao 2004.3.15
++	hardware_version_init();
++	
++	//wlan_led_init();
++
++  	/* Register Device MAX_LED_ID + 1 for reset to factory default */
++	 temp[0].param = 0;
++ 	 temp[0].init = reset_init;
++  	 temp[0].onfunc = 0;
++ 	 temp[0].offfunc = 0;
++	 register_led_drv( MAX_LED_ID + 1 , &temp[0]);
++//wwzh for wireless led  
++#if 1
++  /* Register led 12 WiFi 6 */
++  temp[1].param = 6;
++  temp[1].init = gpio_led_init;
++  temp[1].onfunc = gpio_led_on;
++  temp[1].offfunc = gpio_led_off;
++  register_led_drv( 12 , &temp[1]);
++
++#endif
++
++#if 0
++/**************end ************/
++#if defined(CONFIG_AR5D01)
++  /* Register led 1 GPIO0 */
++  temp[0].param = GPIO_0;
++  temp[0].init = gpio_led_init;
++  temp[0].onfunc = gpio_led_on;
++  temp[0].offfunc = gpio_led_off;
++	register_led_drv( 1 , &temp[0]);
++
++  /* Register led 2 EINT1 */
++  temp[1].param = EINT_1;
++  temp[1].init = gpio_led_init;
++  temp[1].onfunc = gpio_led_on;
++  temp[1].offfunc = gpio_led_off;
++	register_led_drv( 2 , &temp[1]);
++
++  /* Register led 5 EINT1 */
++  temp[2].param = GPIO_1;
++  temp[2].init = gpio_led_init;
++  temp[2].onfunc = gpio_led_on;
++  temp[2].offfunc = gpio_led_off;
++	register_led_drv( 5 , &temp[2]);
++#endif
++
++#if defined(CONFIG_AR5W01)
++  /* Register led 5 GPIO_1 */
++  temp[0].param = GPIO_1;
++  temp[0].init = gpio_led_init;
++  temp[0].onfunc = gpio_led_on;
++  temp[0].offfunc = gpio_led_off;
++	register_led_drv( 5 , &temp[0]);
++
++  /* Register led 7 GPIO_0 */
++  temp[1].param = GPIO_0;
++  temp[1].init = gpio_led_init;
++  temp[1].onfunc = gpio_led_on;
++  temp[1].offfunc = gpio_led_off;
++	register_led_drv( 7 , &temp[1]);
++#endif
++
++//wwzh #if defined(CONFIG_AR7RD)
++#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD
++  /* Register led 5 Green PPPOE GPIO 13 */
++  temp[0].param = 13;
++  temp[0].init = gpio_led_init;
++  temp[0].onfunc = gpio_led_on;
++  temp[0].offfunc = gpio_led_off;
++	register_led_drv( 5 , &temp[0]);
++
++  /* Register led 7 Green USB GPIO 12 */
++  temp[1].param = 12;
++  temp[1].init = gpio_led_init;
++  temp[1].onfunc = gpio_led_on;
++  temp[1].offfunc = gpio_led_off;
++	register_led_drv( 7 , &temp[1]);
++
++  /* Register Device MAX_LED_ID + 1 for reset to factory default */
++  temp[2].param = 0;
++  temp[2].init = reset_init;
++  temp[2].onfunc = 0;
++  temp[2].offfunc = 0;
++	register_led_drv( MAX_LED_ID + 1 , &temp[2]);
++
++  /* Register led 8 RED DSL GPIO 10 */
++  temp[3].param = 10;
++  temp[3].init = gpio_led_init;
++  temp[3].onfunc = gpio_led_on;
++  temp[3].offfunc = gpio_led_off;
++	register_led_drv( 8 , &temp[3]);
++
++  /* Register led 9 RED PPPoE down GPIO 9 */
++  temp[4].param = 9;
++  temp[4].init = gpio_led_init;
++  temp[4].onfunc = gpio_led_on;
++  temp[4].offfunc = gpio_led_off;
++	register_led_drv( 9 , &temp[4]);
++
++  /* Register led 10 DSL down GPIO 8 */
++  temp[5].param = 8;
++  temp[5].init = gpio_led_init;
++  temp[5].onfunc = gpio_led_on;
++  temp[5].offfunc = gpio_led_off;
++	register_led_drv( 10 , &temp[5]);
++
++  /* Register led 11 Power GPIO 7 */
++  temp[6].param = 7;
++  temp[6].init = gpio_led_init;
++  temp[6].onfunc = gpio_led_on;
++  temp[6].offfunc = gpio_led_off;
++	register_led_drv( 11 , &temp[6]);
++
++  /* Register led 12 WiFi 6 */
++  temp[7].param = 6;
++  temp[7].init = gpio_led_init;
++  temp[7].onfunc = gpio_led_on;
++  temp[7].offfunc = gpio_led_off;
++	register_led_drv( 12 , &temp[7]);
++
++  /* Register led 13 ELINK(AA1313) GPIO 15 */
++  temp[8].param = 15;
++  temp[8].init = gpio_led_init;
++  temp[8].onfunc = gpio_led_on;
++  temp[8].offfunc = gpio_led_off;
++	register_led_drv( 13 , &temp[8]);
++
++  /* Register led 14 EACT(Y13) GPIO 16 */
++  temp[9].param = 16;
++  temp[9].init = gpio_led_init;
++  temp[9].onfunc = gpio_led_on;
++  temp[9].offfunc = gpio_led_off;
++	register_led_drv( 14 , &temp[9]);
++
++#endif
++/**************wwzh**************/
++#endif
++/**************end **************/
++  return;
++}
++
++
++
++
++
++
++
++
+diff -urN linux.dev/drivers/char/avalanche_led/ledmod.c linux.dev2/drivers/char/avalanche_led/ledmod.c
+--- linux.dev/drivers/char/avalanche_led/ledmod.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev2/drivers/char/avalanche_led/ledmod.c	2005-10-21 18:03:44.513777000 +0200
+@@ -0,0 +1,1116 @@
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++#include <asm/uaccess.h>
++#include <linux/fs.h>
++#include <linux/timer.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <asm/ar7/avalanche_regs.h>
++#include <asm/ar7/ledapp.h>
++#include <linux/module.h>
++
++#define LED_ON  		1
++#define LED_OFF 		2
++#define LED_BLINK   3
++#define LED_FLASH		4
++
++#define LED_BLINK_UP   		5
++#define LED_BLINK_DOWN   	6
++
++extern void avalanche_leds_init(void);
++
++/***********wwzh**************/
++unsigned int sys_mod_state;
++unsigned int wan_mod_state;
++unsigned int wlan_mod_state;
++
++struct timer_list *pWanTimer = NULL;
++struct timer_list *pWlanTimer = NULL;
++/***********end **************/
++
++typedef struct state_entry{
++  unsigned char mode;
++  unsigned char led;
++	void (*handler)(struct state_entry *pState);
++  unsigned long param;
++}state_entry_t;
++
++typedef struct mod_entry{
++  state_entry_t *states[MAX_STATE_ID];
++}mod_entry_t;
++
++static mod_entry_t *modArr[MAX_MOD_ID];
++static struct proc_dir_entry *led_proc_dir,*led_file;
++
++/* index of the array is the led number HARDWARE SPECIFIC*/
++typedef struct led_data{
++	led_reg_t *led;
++  int				state;
++	struct timer_list *pTimer;
++	unsigned char timer_running;
++  unsigned long param;
++}led_data_t;
++
++led_data_t led_arr[MAX_LED_ID + 1];
++/*!!! The last device is actually being used for ar7 reset to factory default */
++
++
++static spinlock_t	config_lock;
++
++static void board_led_link_up( state_entry_t *pState );
++static void board_led_link_down( state_entry_t *pState );
++static void board_led_activity_on( state_entry_t *pState );
++static void board_led_activity_off( state_entry_t *pState );
++static void led_timer_func(unsigned long data);
++
++extern void board_gpio_init(void);
++extern void uart_led_init(void);
++
++static ssize_t proc_read_led_fops(struct file *filp,
++                                 char *buf,size_t count , loff_t *offp);
++static ssize_t proc_write_led_fops(struct file *filp,const char *buffer,
++                                                      size_t count , loff_t *offp);
++static int config_led( unsigned long y);
++
++struct file_operations led_fops = {
++                                     read: proc_read_led_fops,
++                                     write: proc_write_led_fops,
++                                   };
++
++static int led_atoi( char *name)
++{
++	int val = 0;
++  for(;;name++)
++	{
++		switch(*name)
++		{
++			case '0'...'9':
++				val = val*10+(*name - '0');
++				break;
++			default:
++				return val;
++		}
++	}
++}
++
++static int free_memory(void)
++{
++  int i, j;
++
++  for( i = 0; i < MAX_MOD_ID ; i++)
++	{
++		if( modArr[i] != NULL )
++		{
++			for( j = 0; j < MAX_STATE_ID ; j++ )
++			{
++				if( modArr[i]->states[j] != NULL )
++					kfree( modArr[i]->states[j]);
++			}
++			kfree(modArr[i]);
++      modArr[i] = NULL;
++		}
++	}
++  return 0;
++}
++
++static int led_on( state_entry_t *pState )
++{
++	if( led_arr[pState->led].led == NULL)
++		return -1;
++  led_arr[pState->led].led->onfunc( led_arr[pState->led].led->param);
++  return 0;
++}
++
++static int led_off( state_entry_t *pState )
++{
++	if( led_arr[pState->led].led == NULL)
++		return -1;
++  led_arr[pState->led].led->offfunc( led_arr[pState->led].led->param);
++  return 0;
++}
++
++static void board_led_link_up( state_entry_t *pState )
++{
++  led_arr[pState->led].state = LED_ON;
++  if( led_arr[pState->led].timer_running == 0 )
++  	led_on(pState);
++  return;
++}
++
++static void board_led_link_down( state_entry_t *pState )
++{
++	led_arr[pState->led].state = LED_OFF;
++  if( led_arr[pState->led].timer_running == 0 )
++  	led_off(pState);
++  return;
++}
++
++static void add_led_timer(state_entry_t *pState)
++{
++	led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000;
++  led_arr[pState->led].param = pState->param;
++  led_arr[pState->led].pTimer->data = pState;
++	add_timer (led_arr[pState->led].pTimer);
++}
++
++static void board_led_activity_on(state_entry_t *pState)
++{
++  if(led_arr[pState->led].timer_running == 0)
++	{
++		led_on(pState);
++		add_led_timer(pState);
++	  led_arr[pState->led].timer_running = 1;
++	  led_arr[pState->led].state = LED_BLINK_UP;
++	}
++	else if( led_arr[pState->led].timer_running > 0xF0)
++	{
++	  led_arr[pState->led].state = LED_BLINK_UP;
++		led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000;
++  	led_arr[pState->led].param = pState->param;
++  	led_arr[pState->led].pTimer->data = pState;
++	}
++	return;
++}
++
++static void board_led_activity_off(state_entry_t *pState)
++{
++  if(led_arr[pState->led].timer_running == 0)
++	{
++		led_off(pState);
++		add_led_timer(pState);
++	  led_arr[pState->led].timer_running = 1;
++	  led_arr[pState->led].state = LED_BLINK_UP;
++	}
++	else if( led_arr[pState->led].timer_running > 0xF0)
++	{
++	  led_arr[pState->led].state = LED_BLINK_UP;
++		led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000;
++  	led_arr[pState->led].param = pState->param;
++  	led_arr[pState->led].pTimer->data = pState;
++	}
++	return;
++}
++
++static void board_led_link_flash(state_entry_t *pState)
++{
++  if(led_on(pState))
++		return;
++  if(led_arr[pState->led].timer_running == 0)
++		add_led_timer(pState);
++	else
++    led_arr[pState->led].param = pState->param;
++  led_arr[pState->led].timer_running = 0xFF;
++	led_arr[pState->led].state = LED_FLASH;
++	return;
++}
++
++static void led_timer_func(unsigned long data)
++{
++	state_entry_t *pState = NULL;
++  mod_entry_t *pMod = NULL;
++	unsigned int flags;
++
++	spin_lock_irqsave(&config_lock, flags);
++
++  pState = (state_entry_t *)data;
++
++  if( led_arr[pState->led].state == LED_BLINK_DOWN )
++	{
++		led_arr[pState->led].timer_running = 0;
++		if( pState->mode == 2 )
++			led_arr[pState->led].state = LED_OFF;
++		else
++			led_arr[pState->led].state = LED_ON;
++	}
++  else if( led_arr[pState->led].state == LED_BLINK_UP )
++	{
++    led_arr[pState->led].pTimer->expires = jiffies + HZ*(led_arr[pState->led].param)/1000;
++  	led_arr[pState->led].pTimer->data = pState;
++		add_timer (led_arr[pState->led].pTimer);
++		if( pState->mode == 2 )
++		{
++  		led_off(pState);
++			led_arr[pState->led].state = LED_BLINK_DOWN;
++		}
++		else
++		{
++  		led_on(pState);
++			led_arr[pState->led].state = LED_BLINK_DOWN;
++		}
++		led_arr[pState->led].timer_running = 1;
++	}
++  else if( led_arr[pState->led].state == LED_FLASH )
++	{
++    led_arr[pState->led].pTimer->expires = jiffies + HZ*(led_arr[pState->led].param)/1000;
++  	led_arr[pState->led].pTimer->data = pState;
++		add_timer (led_arr[pState->led].pTimer);
++
++		if( led_arr[pState->led].timer_running == 0xFF )
++		{
++  		led_off(pState);
++			led_arr[pState->led].timer_running--;
++		}
++		else
++		{
++  		led_on(pState);
++			led_arr[pState->led].timer_running++;
++		}
++		spin_unlock_irqrestore(&config_lock, flags);
++    return;
++	}
++  else if(led_arr[pState->led].state == LED_OFF)
++	{
++  	led_off(pState);
++    led_arr[pState->led].timer_running = 0;
++	}
++	else if( led_arr[pState->led].state == LED_ON )
++	{
++  	led_on(pState);
++    led_arr[pState->led].timer_running = 0;
++	}
++	spin_unlock_irqrestore(&config_lock, flags);
++  return;
++}
++/************wwzh*****************/
++#if 0
++/************end *****************/
++static ssize_t proc_read_led_fops(struct file *filp,
++                                 char *buf,size_t count , loff_t *offp)
++{
++  char * pdata = NULL;
++  int i = 0, j = 0, len = 0, totallen = 0;
++  char line[255];
++
++  if( *offp != 0 )
++  	return 0;
++
++  pdata = buf;
++  len += sprintf(line,"LEDS Registered for use are:");
++  for( i = 0; i< MAX_LED_ID; i++)
++		if( led_arr[i].led != NULL )
++			len += sprintf(&line[len]," %d ", i );
++  line[len++] = '\n';
++
++  copy_to_user(pdata, line,len );
++  pdata += len;
++  totallen += len;
++  len = 0;
++  len = sprintf(line,"USER MODULE INFORMATION:\n");
++  copy_to_user(pdata, line,len );
++  pdata += len;
++  totallen += len;
++  len = 0;
++  for( i = 0; i< MAX_MOD_ID; i++)
++	{
++		if( modArr[i] != NULL )
++		{
++			len = sprintf(line,"  Module ID = %d \n" , i);
++  		copy_to_user(pdata, line,len );
++      pdata += len;
++  		totallen += len;
++  		len = 0;
++ 			for( j = 0; j < MAX_STATE_ID; j++)
++			{
++				if( modArr[i]->states[j] != NULL)
++				{
++					len = sprintf(line ,
++                		"    State = %d , Led = %d," , j , modArr[i]->states[j]->led);
++  				copy_to_user(pdata, line,len );
++          pdata += len;
++  				totallen += len;
++
++  				len = 0;
++          switch( modArr[i]->states[j]->mode )
++					{
++						case 1:
++									len = sprintf(line ," Mode = OFF\n");
++									break;
++						case 2:
++									len = sprintf(line ," Mode = BLINK_ON , On Time(ms) = %d\n" ,
++                                       (unsigned int)modArr[i]->states[j]->param);
++									break;
++						case 3:
++									len = sprintf(line ," Mode = BLINK_OFF , Off Time(ms) = %d\n" ,
++                                       (unsigned int)modArr[i]->states[j]->param);
++									break;
++						case 4:
++									len = sprintf(line ," Mode = ON \n");
++									break;
++						case 5:
++									len = sprintf(line ," Mode = FLASH , Time Period(ms) = %d\n" ,
++                                       (unsigned int)modArr[i]->states[j]->param);
++									break;
++						default:
++							break;
++
++					}
++  				copy_to_user(pdata, line,len );
++          pdata += len;
++  				totallen += len;
++
++  				len = 0;
++				}
++			}
++		}
++	}
++  /* Return with configuration information for LEDs */
++	*offp = totallen;
++	return totallen;
++}
++static ssize_t proc_write_led_fops(struct file *filp,const char *buffer,
++                                                      size_t count , loff_t *offp)
++{
++  char *pdata = NULL, *ptemp = NULL;
++  char line[10],temp[10];
++  int i = 0;
++  int mod = 0xFFFF , state = 0xFFFF;
++  int flag = 0;
++
++  /* Check if this write is for configuring stuff */
++  if( *(int *)(buffer) == 0xFFEEDDCC )
++	{
++    printk("<1>proc write:Calling Configuration\n");
++		config_led((unsigned long)(buffer + sizeof(int)) );
++		return count;
++	}
++
++  if( count >= 10)
++	{
++    printk("<1>proc write:Input too long,max length = %d\n",10);
++    return count;
++	}
++  memset( temp, 0x00 , 10);
++  memset( line, 0x00 , 10);
++  copy_from_user(line,buffer,count);
++  line[count] = 0x00;
++  pdata = line;
++  ptemp = temp;
++  while( flag == 0)
++  {
++		if( i > 10 )
++			break;
++		if( ((*pdata) >= '0' ) && ((*pdata) <= '9') )
++		{	
++			*ptemp = *pdata ;
++			ptemp++;
++		}	
++		else if( (*pdata) == ',' )
++		{
++      *ptemp = 0x00;
++			flag = 1;
++		}	
++		pdata++;
++		i++;
++  };
++	if( flag == 1)
++  	mod = led_atoi( temp);
++	else
++		return count;
++		
++  ptemp = temp;
++  *ptemp = 0x00;
++  flag = 0;
++  while( flag == 0)
++  {
++		if( i > 10 )
++			break;
++		if( ((*pdata) >= '0' ) && ((*pdata) <= '9') )
++		{	
++			*ptemp = *pdata ;
++			ptemp++;
++		}	
++		else if( (*pdata) == 0x00 )
++		{
++      *ptemp = 0x00;
++			flag = 1;
++		}	
++		pdata++;
++    i++;
++  };
++	if( flag == 1)
++  	state = led_atoi( temp);
++	else
++		return count;
++  if( (mod == 0xFFFF) || (state == 0xFFFF))
++		return count;
++  else
++    led_operation( mod , state );
++  return count;
++}
++
++/************wwzh*******************/
++#else
++
++#define TRUE 1
++#define FALSE 0
++#define FLICK_TIME (HZ*100/1000)
++static unsigned int wan_txrx_state = 0;
++static unsigned int wlan_txrx_state = 0;
++
++void led_operation( int mod , int state)
++{
++
++	unsigned int flags;
++
++	spin_lock_irqsave(&config_lock, flags);
++
++	if( (mod >= MAX_MOD_ID) || ( state >= MAX_STATE_ID) )
++	{
++	  spin_unlock_irqrestore(&config_lock, flags);
++		return;
++	}
++ 	if ( modArr[mod] == NULL )
++	{
++	  spin_unlock_irqrestore(&config_lock, flags);
++		return;
++	}
++	if( modArr[mod]->states[state] == NULL )
++	{
++	  spin_unlock_irqrestore(&config_lock, flags);
++		return;
++	}
++  /* Call the function handler  */
++  modArr[mod]->states[state]->handler(modArr[mod]->states[state]);
++
++	spin_unlock_irqrestore(&config_lock, flags);
++}
++
++static void wan_led_func(unsigned long data)
++{
++	if (wan_txrx_state == 0)
++	{
++		tnetd73xx_gpio_out(2, TRUE);
++		tnetd73xx_gpio_out(3, FALSE);
++		wan_txrx_state = 1;
++	}
++	else
++	{
++		tnetd73xx_gpio_out(2, FALSE);
++		tnetd73xx_gpio_out(3, FALSE);
++		wan_txrx_state = 0;
++	}
++	pWanTimer->expires = jiffies + FLICK_TIME;
++	add_timer(pWanTimer);
++}
++//wwzh for wireless
++#if 0
++static void wlan_led_func(unsigned long data)
++{
++	if (wlan_txrx_state == 0)
++	{
++		tnetd73xx_gpio_out(12, TRUE);
++		tnetd73xx_gpio_out(13, FALSE);
++		wlan_txrx_state = 1;
++	}
++	else
++	{
++		tnetd73xx_gpio_out(12, FALSE);
++		tnetd73xx_gpio_out(13, FALSE);
++		wlan_txrx_state = 0;
++		
++	}
++	pWlanTimer->expires = jiffies + FLICK_TIME;
++	add_timer(pWlanTimer);
++}
++#endif
++
++void led_active(int mod, int state)
++{
++	unsigned int flags = 0;
++
++//printk("mod = %d state = %d\n", mod, state);
++	spin_lock_irqsave(&config_lock, flags);
++	if ((mod >= 5) || (state >= 5))
++	{
++		spin_unlock_irqrestore(&config_lock, flags);
++		return;
++	}
++	
++	switch (mod)
++	{
++		case 2: /*system led */
++			sys_mod_state = state;
++			switch (state)
++			{
++				case 1:	
++					break;
++				case 2:  /*sys led flashing green */
++					tnetd73xx_gpio_out(4, FALSE);
++					tnetd73xx_gpio_out(5, TRUE);
++					tnetd73xx_gpio_out(8, TRUE);
++					break;
++				case 3: /*sys led solid green */
++					tnetd73xx_gpio_out(4, TRUE);
++					tnetd73xx_gpio_out(5, TRUE);
++					tnetd73xx_gpio_out(8, TRUE);
++					
++					break;
++				case 4: /*sys fail red */
++					tnetd73xx_gpio_out(4, TRUE);
++					tnetd73xx_gpio_out(5, FALSE);
++					tnetd73xx_gpio_out(8, FALSE);
++					break;
++				default:
++					break;
++			}
++			break;
++		case 3: /*wan led */
++			wan_mod_state = state;
++			switch (state)
++			{
++				case 1: /*no wan interface*/
++					if (pWanTimer)
++					{
++						del_timer(pWanTimer);
++						kfree(pWanTimer);
++						pWanTimer = NULL;
++					}
++					tnetd73xx_gpio_out(2, FALSE);
++					tnetd73xx_gpio_out(3, FALSE);
++					break;
++				case 2: /*wan connected */
++					if (pWanTimer)
++					{
++						del_timer(pWanTimer);
++						kfree(pWanTimer);
++						pWanTimer = NULL;
++					}
++					tnetd73xx_gpio_out(2, TRUE);
++					tnetd73xx_gpio_out(3, FALSE);
++					break;
++				case 3: /*rx/tx activity */
++					if (pWanTimer != NULL)
++						break;	
++				
++					pWanTimer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
++					init_timer(pWanTimer);
++					
++					pWanTimer->function = wan_led_func;
++					pWanTimer->data = 0;
++					pWanTimer->expires = jiffies + FLICK_TIME;
++					tnetd73xx_gpio_out(2, FALSE);
++					tnetd73xx_gpio_out(3, FALSE);
++					wan_txrx_state = 0;
++					add_timer(pWanTimer);
++
++					break;
++				case 4: /*no ipaddress */
++					if (pWanTimer)
++					{
++						del_timer(pWanTimer);
++						kfree(pWanTimer);
++						pWanTimer = NULL;
++					}
++					tnetd73xx_gpio_out(2, FALSE);
++					tnetd73xx_gpio_out(3, TRUE);
++					break;
++				default:
++					if (pWanTimer)
++					{	
++						del_timer(pWanTimer);
++						kfree(pWanTimer);
++						pWanTimer = NULL;
++					}
++					break;
++			}
++			break;
++	//wwzh for wireless 
++	#if 0
++		case 4: /*wlan led */
++			wlan_mod_state = state;
++			switch (state)
++			{
++				case 1: /* wlan off */
++					if (pWlanTimer)
++					{
++						del_timer(pWlanTimer);
++						kfree(pWlanTimer);
++						pWlanTimer = NULL;
++					}
++					tnetd73xx_gpio_out(12, FALSE);
++					tnetd73xx_gpio_out(13, FALSE);
++					break;
++				case 2: /* wlan ready */
++					if (pWlanTimer)
++					{
++						del_timer(pWlanTimer);
++						kfree(pWlanTimer);
++						pWlanTimer = NULL;
++					}
++					tnetd73xx_gpio_out(12, TRUE);
++					tnetd73xx_gpio_out(13, FALSE);
++					break;
++				case 3: /* wlan rx/tx activity */
++					if (pWlanTimer != NULL)
++						break;
++					
++					pWlanTimer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
++					init_timer(pWlanTimer);
++					
++					pWlanTimer->function = wlan_led_func;
++					pWlanTimer->data = 0;
++					pWlanTimer->expires = jiffies + FLICK_TIME;
++					tnetd73xx_gpio_out(12, FALSE);
++					tnetd73xx_gpio_out(13, FALSE);
++					wlan_txrx_state = 0;
++					add_timer(pWlanTimer);
++					
++					break;
++				default:
++					if (pWlanTimer)
++					{
++						del_timer(pWlanTimer);
++						kfree(pWlanTimer);
++						pWlanTimer = NULL;
++					}
++					
++					break;
++			}
++			break;
++	#endif //for wireless
++		default:
++			break;
++	}
++	spin_unlock_irqrestore(&config_lock, flags);
++}
++static ssize_t proc_read_led_fops(struct file *filp,
++                                 char *buf,size_t count , loff_t *offp)
++{
++	char *pdata = NULL;
++	int i = 0, j = 0, len = 0, totallen = 0;
++	char line[255];
++	
++	if (*offp != 0)
++		return 0;
++	pdata = buf;
++	len = sprintf(line, "USER MODULE INFORMATION:\n");
++	copy_to_user(pdata, line, len);
++	pdata += len;
++	totallen += len;
++	len = 0;
++	
++	//*******add Module 1 , this Module is ADSL ********/
++	for (i = 0; i < MAX_MOD_ID; i++)
++	{
++		if (modArr[i] != NULL)
++		{
++			len = sprintf(line, " Module ID = %d\n", i);
++			copy_to_user(pdata, line, len);
++			pdata += len;
++			totallen += len;
++			len = 0;
++			for(j = 0; j < MAX_STATE_ID; j++)
++			{
++				if (modArr[i]->states[j] != NULL)
++				{
++					len = sprintf(line, "State =%d, Led = %d,", j, modArr[i]->states[j]->led);
++					copy_to_user(pdata, line, len);
++					pdata += len;
++					totallen += len;
++					len = 0;
++					switch(modArr[i]->states[j]->mode)
++					{
++					  case 1:
++				            len = sprintf(line, "Mode = OFF\n");
++					    break;
++					  case 2:
++					    len = sprintf(line, "Mode = BLINK_ON, On Time(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param);	
++					    break;
++					  case 3:
++					    len = sprintf(line, "Mode = BLINK_OFF, Off Time(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param);
++					    break;
++					  case 4:
++					    len = sprintf(line, "Mode = On\n");
++					    break;
++					  case 5:
++					    len = sprintf(line, "Mode = FLASH, Time Period(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param);
++					    break;
++					  default:
++					    break;		
++					}
++					copy_to_user(pdata, line, len);
++					pdata += len;
++					totallen += len;
++					len = 0;
++				}
++			} 
++		}
++
++	}
++
++	len = sprintf(line, "Module ID = 2(system led)\n");
++	copy_to_user(pdata, line, len);
++	pdata += len;
++	totallen += len;
++	len = 0;
++	switch(sys_mod_state)
++	{
++		case 1:
++			len = sprintf(line, "State = OFF\n");
++			break;
++		case 2:	
++			len = sprintf(line, "State = Booting\n");
++			break;
++		case 3:
++			len = sprintf(line, "State = System Ready\n");
++			break;
++		case 4:
++			len = sprintf(line, "State = System Failure\n");
++			break;
++		default:
++			break;
++	}
++	copy_to_user(pdata, line, len);
++	pdata += len;
++	totallen += len;
++	len = 0;
++	
++	len = sprintf(line, "Module ID = 3(WAN led)\n");
++	copy_to_user(pdata, line, len);
++	pdata += len;
++	totallen += len;
++	len = 0;
++	switch(wan_mod_state)
++	{
++		case 1:
++			len = sprintf(line, "State = OFF\n");
++			break;
++		case 2:
++			len = sprintf(line, "State = Wan Connected\n");
++			break;
++		case 3:
++			len = sprintf(line, "State = Wan Tx/Rx Activity\n");
++			break;
++		case 4:
++			len = sprintf(line, "State = Wan Connect Failure\n");
++			break;
++		default:
++			break;
++	}
++	copy_to_user(pdata, line, len);
++	pdata += len;
++	totallen += len;
++	len = 0;
++
++//wwzh for wireless
++#if 0
++	len = sprintf(line, "Module ID = 4(WLAN led)\n");
++	copy_to_user(pdata, line, len);
++	pdata += len;
++	totallen += len;
++	len = 0;
++	switch(wlan_mod_state)
++	{
++		case 1:
++			len = sprintf(line, "State = OFF\n");
++			break;
++		case 2:
++			len = sprintf(line, "State = wlan Ready\n");
++			break;
++		case 3:
++			len = sprintf(line, "State = wlan rx/tx activity\n");
++			break;
++		default:
++			break; 
++	}
++	copy_to_user(pdata, line, len);
++	pdata += len;
++	totallen += len;
++	len = 0;
++#endif //for wireless
++	
++	*offp = totallen;
++	return totallen;
++}
++static ssize_t proc_write_led_fops(struct file *filp,const char *buffer,
++                                               size_t count , loff_t *offp)
++{
++	char *pdata = NULL, *ptemp = NULL;
++	char line[10], temp[10];
++	int i = 0;
++	int mod = 0xffff, state = 0xffff;
++	int flag = 0;
++
++ 	 /* Check if this write is for configuring ADSL */
++  	if( *(int *)(buffer) == 0xFFEEDDCC )
++	{
++   		 printk("<1>proc write:Calling Configuration\n");
++		 config_led((unsigned long)(buffer + sizeof(int)) );
++		 return count;
++	}
++
++	if (count > 10)
++	{
++		printk("<1> proc write: Input too long, max length = 10\n");
++		return count;
++	}
++	memset(temp, 0x00, 10);
++	memset(line, 0x00, 10);
++	copy_from_user(line, buffer, count);
++	line[count] = 0x00;
++	pdata = line;
++	ptemp = temp;	
++	
++	while (flag == 0)
++	{
++		if (i > 10)
++			break;
++		if (((*pdata) >= '0') && ((*pdata) <= '9'))
++		{
++			*ptemp = *pdata;
++			ptemp++;
++		}
++		else if ((*pdata) == ',')
++		{
++			*ptemp = 0x00;
++			flag = 1;
++		}
++		pdata++;
++		i++;
++	}
++	if (flag == 1)
++		mod = led_atoi(temp);
++	else
++		return count;
++	
++	ptemp = temp;
++	*ptemp = 0x00;
++	flag = 0;
++	
++	while(flag == 0)
++	{
++		if (i > 10)
++			break;
++		if (((*pdata) >= '0') && ((*pdata) <= '9'))
++		{
++			*ptemp = *pdata;
++			ptemp++;
++		}
++		else if ((*pdata) == 0x00)
++		{
++			*ptemp = 0x00;
++			flag = 1;
++		}
++		pdata++;
++		i++;
++	}
++	if (flag == 1)
++		state = led_atoi(temp);
++	else
++		return count;
++	if ((mod == 0xFFFF) || (state == 0xFFFF))
++		return count;
++	else
++	{
++		if (mod != 4)
++			led_active(mod, state);	
++		else 
++			led_operation(mod, state);
++	} 
++	return 1;
++}
++#endif
++/************end *******************/
++static int config_led(unsigned long y)
++{
++  config_elem_t *pcfg = NULL;
++  char *pdata = NULL;
++  int i;
++  int length = 0 , number = 0;
++	unsigned int flags;
++
++	spin_lock_irqsave(&config_lock, flags);
++
++    /* ioctl to configure */
++    length =  *((int*)y);
++    pdata = (char *)y + sizeof(int);
++    number =  (length - sizeof(int))/sizeof(config_elem_t);
++    pcfg = (config_elem_t *)(pdata);
++
++    /* Check if an earlier configuration exists IF yes free it up */
++    free_memory();
++
++    for ( i = 0 ; i < number ; i++ )
++    {
++			/* If no structure has been allocated for the module do so */
++      if ( modArr[pcfg->name] == NULL )
++			{
++					printk("<1>module =  %d\n",pcfg->name);
++        if( pcfg->name >= MAX_MOD_ID)
++				{
++					printk("<1>Exiting Configuration: Module ID too large %d\n",pcfg->name);
++					free_memory();
++					spin_unlock_irqrestore(&config_lock, flags);
++					return -1;
++				}
++        modArr[pcfg->name] = kmalloc(sizeof(mod_entry_t),GFP_KERNEL);
++        if(modArr[pcfg->name] == NULL)
++				{
++					printk("<1>Exiting Configuration: Error in allocating memory\n");
++					free_memory();
++					spin_unlock_irqrestore(&config_lock, flags);
++					return -1;
++				}
++				memset( modArr[pcfg->name], 0x00, sizeof(mod_entry_t));
++			}
++
++      /* if no structure is allocated previously for this state
++         allocate a structure, if it's already there fill it up */
++			if( modArr[pcfg->name]->states[pcfg->state] == NULL)
++			{
++					printk("<1>STATE =  %d\n",pcfg->state);
++				if( pcfg->state >= MAX_STATE_ID)
++				{
++					printk("<1>Exiting Configuration: State ID too large\n");
++					free_memory();
++					spin_unlock_irqrestore(&config_lock, flags);
++					return -1;
++				}
++				modArr[pcfg->name]->states[pcfg->state] =
++                        kmalloc(sizeof(state_entry_t),GFP_KERNEL);
++				if( modArr[pcfg->name]->states[pcfg->state] == NULL)
++				{
++					free_memory();
++					spin_unlock_irqrestore(&config_lock, flags);
++					return -1;
++				}
++				memset( modArr[pcfg->name]->states[pcfg->state], 0x00, sizeof(state_entry_t));
++			}
++			/* Fill up the fields of the state */
++      if( pcfg->led >= MAX_LED_ID)
++			{
++				printk("<1>led =  %d\n",pcfg->led);
++				free_memory();
++				spin_unlock_irqrestore(&config_lock, flags);
++				return -1;
++			}
++      modArr[pcfg->name]->states[pcfg->state]->led = pcfg->led;
++      modArr[pcfg->name]->states[pcfg->state]->mode = pcfg->mode;
++      modArr[pcfg->name]->states[pcfg->state]->param = pcfg->param;
++			switch(pcfg->mode)
++			{
++				case 1:
++      		modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_down;
++					break;
++				case 2:
++				case 3:
++				case 5:
++					if( pcfg->mode == 2 )
++						modArr[pcfg->name]->states[pcfg->state]->handler = board_led_activity_on;
++					else if( pcfg->mode == 3)
++      			modArr[pcfg->name]->states[pcfg->state]->handler = board_led_activity_off;
++					else
++		        modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_flash;
++					break;
++				case 4:
++      		modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_up;
++					break;
++				default:
++				  printk("<1>Exiting Configuration: Unknown LED Mode\n");
++					free_memory();
++					spin_unlock_irqrestore(&config_lock, flags);
++					return -1;
++			}
++			pcfg++;			
++    }
++	spin_unlock_irqrestore(&config_lock, flags);
++  return 0;
++}
++
++
++int __init led_init(void)
++{
++
++  /* Clear our memory */
++  memset(modArr,0x00,sizeof(mod_entry_t *)*MAX_MOD_ID);
++  memset(led_arr,0x00,sizeof(led_data_t *)*MAX_LED_ID);
++
++	/* Create spin lock for config data structure */
++	config_lock=SPIN_LOCK_UNLOCKED;
++
++  /* Create directory */
++  led_proc_dir = proc_mkdir("led", NULL);
++  if( led_proc_dir == NULL )
++    goto out;
++
++  /* Create adsl file */
++  led_file = create_proc_entry("led", 0777, led_proc_dir);
++  if( led_file == NULL)
++    goto led_file;
++  led_file->owner = THIS_MODULE;
++  led_file->proc_fops = &led_fops;
++
++  memset( modArr , 0x00 , sizeof(mod_entry_t *) * MAX_MOD_ID);
++	/* Reset the GPIO pins  */
++  board_gpio_init();
++
++	/* Register the UART controlled LEDS  */
++  uart_led_init();
++  /* Create the usb proc file */
++	avalanche_leds_init();
++  return 0;
++
++  led_file:
++    remove_proc_entry("led",led_proc_dir);
++  out:
++    return 0;
++
++}
++
++void led_exit()
++{
++	remove_proc_entry("led", led_proc_dir);
++}
++
++module_init(led_init);
++module_exit(led_exit);
++
++void register_led_drv( int device , led_reg_t *pInfo)
++{
++	unsigned int flags;
++	struct timer_list *pTimer = NULL;
++
++	spin_lock_irqsave(&config_lock, flags);
++
++	led_arr[device].led = pInfo;
++	if( led_arr[device].led->init != 0x00)
++      led_arr[device].led->init(led_arr[device].led->param);
++	if( led_arr[device].led->offfunc != 0x00)
++      led_arr[device].led->offfunc(led_arr[device].led->param);
++
++	/* Create a timer for blinking   */
++  pTimer = kmalloc(sizeof(struct timer_list),GFP_KERNEL);
++	init_timer( pTimer );
++	pTimer->function = led_timer_func;
++	pTimer->data = 0;
++  led_arr[device].pTimer = pTimer;
++  led_arr[device].timer_running = 0;
++
++	spin_unlock_irqrestore(&config_lock, flags);
++
++  return;
++}
++
++void deregister_led_drv( int device)
++{
++	unsigned int flags;
++
++	spin_lock_irqsave(&config_lock, flags);
++	led_arr[device].led = NULL;
++
++	if( led_arr[device].pTimer != NULL)
++	{
++		del_timer(led_arr[device].pTimer);
++		kfree(led_arr[device].pTimer);
++	}
++	spin_unlock_irqrestore(&config_lock, flags);
++
++  return;
++}
++
++EXPORT_SYMBOL_NOVERS(led_operation);
++EXPORT_SYMBOL_NOVERS(register_led_drv);
++EXPORT_SYMBOL_NOVERS(deregister_led_drv);
++
+diff -urN linux.dev/drivers/char/avalanche_led/leds.c linux.dev2/drivers/char/avalanche_led/leds.c
+--- linux.dev/drivers/char/avalanche_led/leds.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev2/drivers/char/avalanche_led/leds.c	2005-10-21 18:03:44.513777000 +0200
+@@ -0,0 +1,133 @@
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <asm/ar7/avalanche_regs.h>
++#include <linux/spinlock.h>
++#include <linux/timer.h>
++#include <linux/sched.h>
++#include <linux/module.h>
++#include <linux/proc_fs.h>
++#include <asm/uaccess.h>
++#include <linux/fs.h>
++
++#include <asm/ar7/ledapp.h>
++
++#if defined(CONFIG_AR5D01) || defined(CONFIG_AR5W01) || defined(CONFIG_AR7)
++
++#define ETH_MASK 0x01
++#define USB_MASK 0x02
++
++static struct proc_dir_entry *usb_file;
++static ssize_t proc_read_usb_fops(struct file *filp,
++                                 char *buf,size_t count , loff_t *offp);
++struct file_operations usb_fops = {read: proc_read_usb_fops};
++
++typedef struct mod_states{
++  int module;
++  int activity;
++  int linkup;
++  int idle;
++}mod_states_t;
++
++mod_states_t state_arr[] = {
++                          	{ MOD_ETH,DEF_ETH_ACTIVITY,DEF_ETH_LINK_UP,DEF_ETH_IDLE },
++                          	{ MOD_USB,DEF_USB_ACTIVITY,DEF_USB_LINK_UP,DEF_USB_IDLE },
++                          	{ MOD_LAN,DEF_LAN_ACTIVITY,DEF_LAN_LINK_UP,DEF_LAN_IDLE }
++                        	};
++
++unsigned char	device_links = 0;	/* Bitmask with the devices that are up */
++
++
++void avalanche_led_activity_pulse(unsigned long device)
++{
++	/* If device link is not up return */
++  if( !(device_links & (unsigned char)(1 << device)))
++		return;
++#ifdef MULTIPLEX_LED
++	led_operation( state_arr[2].module, state_arr[2].activity);
++#else
++	led_operation( state_arr[device].module, state_arr[device].activity);
++#endif
++}
++
++void avalanche_led_link_up( unsigned long device )
++{
++	
++  /* If already UP ignore */
++  if( device_links & (unsigned char)(1 << device))
++		return;
++  /* Turn on the bit for the device */
++	device_links |= (unsigned char)(1 << device);
++#ifdef MULTIPLEX_LED
++	led_operation( state_arr[2].module, state_arr[2].linkup);
++#else
++	led_operation( state_arr[device].module, state_arr[device].linkup);
++#endif
++}
++
++void avalanche_led_link_down ( unsigned long device )
++{
++
++  /* If already DOWN ignore */
++  if( !(device_links & (unsigned char)(1 << device)))
++		return;
++
++	/* Turn off the bit for the device */
++	device_links &= ~(unsigned char)(1 << device);
++#ifdef MULTIPLEX_LED
++	/* If no links, then shut the LED off  */
++	if(!device_links)
++		led_operation( state_arr[2].module, state_arr[2].idle);
++#else
++	led_operation( state_arr[device].module, state_arr[device].idle);
++#endif
++}
++
++static ssize_t proc_read_usb_fops(struct file *filp,
++                                 char *buf,size_t count , loff_t *offp)
++{
++  char * pdata = NULL;
++  char line[3];
++  if( *offp != 0 )
++  	return 0;
++  pdata = buf;
++  if( device_links & USB_MASK)
++  	sprintf(line,"%s\n","1");
++  else
++  	sprintf(line,"%s\n","0");
++  copy_to_user(pdata,line,2);
++	*offp = 2;
++	return 2;
++}
++
++
++void avalanche_leds_init(void)
++{
++  /* Create usb link proc file */
++  usb_file = create_proc_entry("avalanche/usb_link", 0444, NULL);
++  if( usb_file == NULL)
++    return;
++  usb_file->owner = THIS_MODULE;
++  usb_file->proc_fops = &usb_fops;
++	return;
++}
++
++EXPORT_SYMBOL(avalanche_led_activity_pulse);
++EXPORT_SYMBOL(avalanche_led_link_up);
++EXPORT_SYMBOL(avalanche_led_link_down);
++
++#else
++/* We make a dummy init routine for the platforms that do not support this led
++   API
++*/
++
++void avalanche_leds_init(void)
++{
++}
++
++#endif
++
++
++
++
++
+diff -urN linux.dev/drivers/char/avalanche_led/uartled.c linux.dev2/drivers/char/avalanche_led/uartled.c
+--- linux.dev/drivers/char/avalanche_led/uartled.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev2/drivers/char/avalanche_led/uartled.c	2005-10-21 18:03:44.529778000 +0200
+@@ -0,0 +1,55 @@
++#include <linux/kernel.h>
++#include <asm/uaccess.h>
++#include <linux/spinlock.h>
++#include <asm/ar7/avalanche_regs.h>
++#include <asm/ar7/ledapp.h>
++
++#define UART_LED_REG  (*(volatile unsigned int *)(UARTA_BASE + 0x10))
++
++static spinlock_t	device_lock;
++led_reg_t temp1[2];
++
++static void uart_led_on(unsigned long param)
++{
++  unsigned long flags;
++
++  spin_lock_irqsave(&device_lock,flags);
++  UART_LED_REG &= 0xFFFD;
++  spin_unlock_irqrestore(&device_lock, flags);
++}
++
++static void uart_led_off ( unsigned long param )
++{
++   unsigned int flags = 0x00;
++   spin_lock_irqsave(&device_lock, flags);
++   UART_LED_REG |= 0x02;
++	spin_unlock_irqrestore(&device_lock, flags);
++}
++
++void uart_led_init(void)
++{
++
++#if defined(CONFIG_AR5D01)
++  /* Register led 6 UART Pin 1 */
++  temp1[0].param = 0;
++  temp1[0].init = NULL;
++  temp1[0].onfunc = uart_led_on;
++  temp1[0].offfunc = uart_led_off;
++	register_led_drv( 6 , &temp1[0]);
++#endif
++
++#if defined(CONFIG_AR5W01)
++  /* Register led 8 UART Pin 1 */
++  temp1[0].param = 0;
++  temp1[0].init = NULL;
++  temp1[0].onfunc = uart_led_on;
++  temp1[0].offfunc = uart_led_off;
++	register_led_drv( 8 , &temp1[0]);
++#endif
++
++	/* Initialize the link mask */
++	device_lock = SPIN_LOCK_UNLOCKED;
++
++  return;
++}
++
+diff -urN linux.dev/include/asm-mips/ar7/led_config.h linux.dev2/include/asm-mips/ar7/led_config.h
+--- linux.dev/include/asm-mips/ar7/led_config.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev2/include/asm-mips/ar7/led_config.h	2005-10-21 17:02:25.568327000 +0200
+@@ -0,0 +1,55 @@
++/******************************************************************************    
++ * FILE PURPOSE:     - LED config Header                                       
++ ******************************************************************************    
++ * FILE NAME:     led_config.h                                                        
++ *                                                                                 
++ * DESCRIPTION:  Header file for LED configuration parameters
++ *               and data structures                                                 
++ *                                                                                 
++ * REVISION HISTORY:                                                               
++ * 11 Oct 03 - PSP TII                                                             
++ *                                                                                 
++ * (C) Copyright 2002, Texas Instruments, Inc                                      
++ *******************************************************************************/  
++                                                                                   
++
++#ifndef __LED_CONFIG__
++#define __LED_CONFIG__
++
++/* LED config parameters */
++#define  MAX_GPIO_PIN_NUM           64
++#define  MAX_GPIOS_PER_STATE         5
++#define  MAX_MODULE_ENTRIES         25
++#define  MAX_MODULE_INSTANCES        4
++#define  MAX_STATE_ENTRIES          25
++#define  MAX_LED_ENTRIES            25
++
++
++/* LED modes */
++#define LED_OFF                    0
++#define LED_ON                     1
++#define LED_ONESHOT_OFF            2
++#define LED_ONESHOT_ON             3
++#define LED_FLASH                  4
++#define LED_BLINK_CODE0            5    /*--- param1: on time, param2: blink nr , (param2 > 100 blink off) ---*/
++#define LED_BLINK_CODE1            6 
++#define LED_BLINK_CODE2            7 
++
++#define NUM_LED_MODES              8
++
++
++
++/* Data structure for LED configuration */
++typedef struct led_config{
++    unsigned char name[80];
++    unsigned int instance;
++    unsigned int state;
++    unsigned int gpio[MAX_GPIOS_PER_STATE];
++    unsigned int mode[MAX_GPIOS_PER_STATE];
++    unsigned int gpio_num;
++    unsigned int param1;
++    unsigned int param2;
++}LED_CONFIG_T;
++
++
++#endif /* __LED_CONFIG__ */
+diff -urN linux.dev/include/asm-mips/ar7/led_hal.h linux.dev2/include/asm-mips/ar7/led_hal.h
+--- linux.dev/include/asm-mips/ar7/led_hal.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev2/include/asm-mips/ar7/led_hal.h	2005-10-21 17:02:25.568327000 +0200
+@@ -0,0 +1,30 @@
++/******************************************************************************
++ * FILE PURPOSE:     - LED HAL module Header
++ ******************************************************************************
++ * FILE NAME:     led_hal.h
++ *
++ * DESCRIPTION:    LED HAL API's.
++ *
++ * REVISION HISTORY:
++ * 11 Oct 03 - PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifndef __LED_HAL__
++#define __LED_HAL__
++
++/* Interface prototypes */
++#include "led_config.h"
++
++int avalanche_led_hal_init (int *gpio_off_value, int num_gpio_pins);
++int avalanche_led_config_set (LED_CONFIG_T * led_cfg);
++int avalanche_led_config_get (LED_CONFIG_T *led_cfg,int module_id,int instance, int state);
++void *avalanche_led_register (const char *module_name, int instance_num);
++void  avalanche_led_action (void *handle, int state_id);
++void avalanche_led_late_actions(void);
++int avalanche_led_unregister (void *handle);
++void avalanche_led_free_all(void);
++void avalanche_led_hal_exit (void);
++
++#endif /*__LED_HAL__ */
+diff -urN linux.dev/include/asm-mips/ar7/ledapp.h linux.dev2/include/asm-mips/ar7/ledapp.h
+--- linux.dev/include/asm-mips/ar7/ledapp.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev2/include/asm-mips/ar7/ledapp.h	2005-10-21 18:03:44.573780750 +0200
+@@ -0,0 +1,59 @@
++#ifndef __LED_APP__
++#define __LED_APP__
++
++#define CONF_FILE		"/etc/led.conf"
++#define LED_PROC_FILE		"/proc/led_mod/led"
++
++#define CONFIG_LED_MODULE
++
++#define MAX_MOD_ID        25
++#define MAX_STATE_ID   	  25
++#define MAX_LED_ID 	  25
++
++#define MOD_ADSL 1
++#define DEF_ADSL_IDLE     1
++#define DEF_ADSL_TRAINING 2
++#define DEF_ADSL_SYNC     3
++#define DEF_ADSL_ACTIVITY 4
++
++#define MOD_WAN  2
++#define DEF_WAN_IDLE      1
++#define DEF_WAN_NEGOTIATE 2
++#define DEF_WAN_SESSION   3
++
++#define MOD_LAN  3
++#define DEF_LAN_IDLE		  1
++#define DEF_LAN_LINK_UP   2
++#define DEF_LAN_ACTIVITY  3
++
++#define MOD_WLAN 4
++#define DEF_WLAN_IDLE     1
++#define DEF_WLAN_LINK_UP  2
++#define DEF_WLAN_ACTIVITY 3
++
++#define MOD_USB  5
++#define DEF_USB_IDLE		  1
++#define DEF_USB_LINK_UP   2
++#define DEF_USB_ACTIVITY  3
++
++#define MOD_ETH  6
++#define DEF_ETH_IDLE		  1
++#define DEF_ETH_LINK_UP   2
++#define DEF_ETH_ACTIVITY  3
++
++typedef struct config_elem{
++  unsigned char name;
++  unsigned char state;
++  unsigned char mode;
++  unsigned char led;
++            int param;
++}config_elem_t;
++
++typedef struct led_reg{
++	unsigned int param;
++  void (*init)(unsigned long param);
++  void (*onfunc)(unsigned long param);
++  void (*offfunc)(unsigned long param);
++}led_reg_t;
++
++#endif
diff --git a/openwrt/target/linux/ar7-2.4/patches/003-net_driver_cpmac.patch b/openwrt/target/linux/ar7-2.4/patches/003-net_driver_cpmac.patch
new file mode 100644
index 0000000..42b6458
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/patches/003-net_driver_cpmac.patch
@@ -0,0 +1,13341 @@
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.c
+--- linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.c	2005-07-12 02:48:41.996601000 +0200
+@@ -0,0 +1,728 @@
++#ifndef _INC_CPCOMMON_C
++#define _INC_CPCOMMON_C
++
++#ifdef _CPHAL_CPMAC
++#include "cpremap_cpmac.c"
++#endif
++
++#ifdef _CPHAL_AAL5
++#include "cpremap_cpaal5.c"
++#endif
++
++#ifdef _CPHAL_CPSAR
++#include "cpremap_cpsar.c"
++#endif
++
++#ifdef _CPHAL_AAL2
++#include "cpremap_cpaal2.c"
++#endif
++
++/**
++@defgroup Common_Config_Params Common Configuration Parameters
++
++This section documents the configuration parameters that are valid across
++all CPHAL devices.
++@{
++*/
++/** This is the debug level.  The field is bit defined, such that the user
++should set to 1 all the bits corresponding to desired debug outputs.  The following 
++are the meanings for each debug bit:
++- bit0 (LSB): CPHAL Function Trace
++- b1 : OS Function call trace
++- b2 : Critical section entry/exit
++- b3 : Memory allocation/destruction
++- b4 : Detailed information in Rx path
++- b5 : Detailed information in Tx path
++- b6 : Extended error information
++- b7 : General info
++*/
++static const char pszDebug[]        = "debug";
++/** CPU Frequency. */
++/*static const char pszCpuFreq[]      = "CpuFreq";*/               /*MJH-030403*/
++/** Base address for the module. */
++static const char pszBase[]         = "base";
++/** Reset bit for the module. */
++static const char pszResetBit[]     = "reset_bit";
++/** Reset base address for the module. */
++static const char pszResetBase[]    = "ResetBase";
++/** Interrupt line for the module. */
++static const char pszIntLine[]      = "int_line";
++/** VLYNQ offset for the module.  Disregard if not using VLYNQ. */
++static const char pszOffset[]       = "offset";
++/** The OS may "Get" this parameter, which is a pointer
++    to a character string that indicates the version of CPHAL. */
++static const char pszVer[]          = "Version";
++/*@}*/
++
++/**
++@defgroup Common_Control_Params Common Keys for [os]Control()
++
++This section documents the keys used with the OS @c Control() interface that
++are required by CPHAL devices.
++
++@{
++*/
++/** Used to wait for an integer number of clock ticks, given as an integer
++    pointer in the @p Value parameter.  No actions are defined. */
++static const char pszSleep[]             = "Sleep";
++/** Requests the OS to flush it's IO buffers.  No actions are defined. */
++static const char pszSioFlush[]          = "SioFlush";
++/*@}*/
++
++static const char pszStateChange[]       = "StateChange";
++static const char pszStatus[]            = "Status";
++
++static const char pszGET[]               = "Get";
++static const char pszSET[]               = "Set";
++static const char pszCLEAR[]             = "Clear";
++static const char pszNULL[]              = "";
++static const char pszLocator[]           = "Locator";
++static const char pszOff[]               = "Off";
++static const char pszOn[]                = "On";
++static const char hcMaxFrags[]           = "MaxFrags";
++
++#ifdef _CPHAL_CPMAC
++
++/*  New method for string constants */
++const char hcClear[]  = "Clear";
++const char hcGet[]    = "Get";
++const char hcSet[]    = "Set";
++
++const char hcTick[]   = "Tick";
++
++static const CONTROL_KEY KeyCommon[] =
++   {
++     {""                   , enCommonStart},
++     {pszStatus            , enStatus},
++     {pszOff               , enOff},
++     {pszOn                , enOn},
++     {pszDebug             , enDebug},
++     {hcCpuFrequency       , enCpuFreq},                           /*MJH~030403*/
++     {""                   , enCommonEnd}
++   };
++#endif
++
++/**
++@defgroup Common_Statistics Statistics
++
++A broad array of module statistics is available.  Statistics values are accessed
++through the @c Control() interface of the CPHAL.  There are 5 different levels
++of statistics, each of which correspond to a unique set of data.  Furthermore,
++certain statistics data is indexed by using a channel number and Tx queue number.
++The following is a brief description of each statistics level, along with the
++indexes used for the level:
++
++- Level 0:  Hardware Statistics (index with channel)
++- Level 1:  CPHAL Software Statistics (channel, queue)
++- Level 2:  CPHAL Flags (channel, queue)
++- Level 3:  CPHAL Channel Configuration (channel)
++- Level 4:  CPHAL General Configuration (no index)
++
++The caller requests statistics information by providing a Key string to the
++@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
++The only valid Action parameter for statistics usage is "Get".
++
++Code Examples:
++@code
++unsigned int *StatsData;
++
++# Get Level 0 stats for Channel 1
++HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
++
++# Get Level 2 stats for Channel 0, Queue 0
++HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
++
++# Get Level 4 stats
++HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
++@endcode
++
++The information returned in the Value parameter of @c Control() is an
++array of pointers to strings.  The pointers are arranged in pairs.
++The first pointer is a pointer to a name string for a particular statistic.
++The next pointer is a pointer to a string containing the representation of
++the integer statistic value corresponding to the first pointer.  This is followed
++by another pair of pointers, and so on, until a NULL pointer is encountered.  The
++following is example code for processing the statistics data.  Note that the OS
++is responsible for freeing the memory passed back through the Value parameter of
++@c Control().
++
++@code
++unsigned int *StatsData;
++
++# Get Level 0 stats for Channel 1
++HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
++
++# output Statistics data
++PrintStats(StatsData);
++
++# the upper layer is responsible for freeing stats info
++free(&StatsPtr);
++
++...
++
++void PrintStats(unsigned int *StatsPtr)
++  {
++   while(*StatsPtr)
++     {
++      printf("%20s:",  (char *)*StatsPtr);
++      StatsPtr++;
++      printf("%11s\n", (char *)*StatsPtr);
++      StatsPtr++;
++     }
++   MySioFlush();
++  }
++@endcode
++
++Within each statistics level, there are several statistics defined.  The statistics that
++are common to every CPPI module are listed below.  In addition, each module may define
++extra statistics in each level, which will be documented within the module-specific
++documentation appendices.
++
++- Level 0 Statistics
++  - All level 0 statistics are module-specific.
++- Level 1 Statistics (CPHAL Software Statistics)
++  - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
++  - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
++transmitting the previous last packet in the queue (per channel and queue).
++  - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
++reception of the previous last packet in the queue (per channel).
++  - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
++  - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
++  - RxPacketsServiced: Number of received packets (per channel).
++  - TxPacketsServiced: Number of transmitted packets (per channel and queue).
++  - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
++  - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
++  - RxTotal: Total number of received packets, all channels.
++  - TxTotal: Total number of transmitted packets, all channels and queues.
++- Level 2 Statistics (CPHAL Flags)
++  - RcbPool: Pointer to receive descriptor pool (per channel).
++  - RxActQueueCount: Number of buffers currently available for receive (per channel).
++  - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
++  - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
++  - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
++  - RcbStart: Pointer to block of receive descriptors.
++  - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
++  - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
++  - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
++  - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
++  - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
++  - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
++  - TcbStart: Pointer to block of transmit descriptors.
++  - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
++- Level 3 Statistics (CPHAL Channel Configuration)
++  - RxBufSize: Rx buffer size.
++  - RxBufferOffset: Rx buffer offset.
++  - RxNumBuffers: Number of Rx buffers.
++  - RxServiceMax: Maximum number of receive packets to service at a time.
++  - TxNumBuffers: Number of Tx buffer descriptors.
++  - TxNumQueues: Number of Tx queues to use.
++  - TxServiceMax: Maximum number of transmit packets to service at a time.
++- Level 4 Statistics (CPHAL General Configuration)
++  - Base Address: Base address of the module.
++  - Offset (VLYNQ): VLYNQ relative module offset.
++  - Interrupt Line: Interrupt number.
++  - Debug: Debug flag, 1 to enable debug.
++  - Inst: Instance number.
++*/
++
++/* 
++   Data Type 0 = int display
++   Data Type 1 = hex display
++   Data Type 2 = channel structure, int display
++   Data Type 3 = queue index and int display
++   Data Type 4 = queue index and hex display
++*/
++#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
++static STATS_TABLE StatsTable0[] =
++  {
++#ifdef _CPHAL_AAL5
++   /* Name ,        Data Ptr,   Data Type */
++   {"Crc Errors",          0,          0},
++   {"Len Errors",          0,          0},
++   {"Abort Errors",        0,          0},
++   {"Starv Errors",        0,          0}
++#endif
++#ifdef _CPHAL_CPMAC
++   {"Rx Good Frames",      0,          0}
++#endif
++  };
++
++static STATS_TABLE StatsTable1[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"DmaLenErrors",        0,          0},
++   {"TxMisQCnt",           0,          3},
++   {"RxMisQCnt",           0,          0},
++   {"TxEOQCnt",            0,          3},
++   {"RxEOQCnt",            0,          0},
++   {"RxPacketsServiced",   0,          0},
++   {"TxPacketsServiced",   0,          3},
++   {"RxMaxServiced",       0,          0},
++   {"TxMaxServiced",       0,          3},
++   {"RxTotal",             0,          0},
++   {"TxTotal",             0,          0},
++  };
++
++static STATS_TABLE StatsTable2[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"RcbPool",             0,          1},
++   {"RxActQueueCount",     0,          0},
++   {"RxActQueueHead",      0,          1},
++   {"RxActQueueTail",      0,          1},
++   {"RxActive",            0,          0},
++   {"RcbStart",            0,          1},
++   {"RxTeardownPending",   0,          0},
++   {"TcbPool",             0,          4},
++   {"TxActQueueCount",     0,          3},
++   {"TxActQueueHead",      0,          4},
++   {"TxActQueueTail",      0,          4},
++   {"TxActive",            0,          3},
++   {"TcbStart",            0,          4},
++   {"TxTeardownPending",   0,          0}
++  };
++
++static STATS_TABLE StatsTable3[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"RxBufSize",           0,          2},
++   {"RxBufferOffset",      0,          2},
++   {"RxNumBuffers",        0,          2},
++   {"RxServiceMax",        0,          2},
++   {"TxNumBuffers",        0,          2},
++   {"TxNumQueues",         0,          2},
++   {"TxServiceMax",        0,          2},
++#ifdef _CPHAL_AAL5
++   {"CpcsUU",              0,          2},
++   {"Gfc",                 0,          2},
++   {"Clp",                 0,          2},
++   {"Pti",                 0,          2},
++   {"DaMask",              0,          2},
++   {"Priority",            0,          2},
++   {"PktType",             0,          2},
++   {"Vci",                 0,          2},
++   {"Vpi",                 0,          2},
++   {"CellRate",            0,          2},
++   {"QosType",             0,          2},
++   {"Mbs",                 0,          2},
++   {"Pcr",                 0,          2}
++#endif
++  };
++
++static STATS_TABLE StatsTable4[] =
++  {
++   {"Base Address",        0,          1},
++   {"Offset (VLYNQ)",      0,          0},
++   {"Interrupt Line",      0,          0},
++   {"Debug",               0,          0},
++   {"Instance",            0,          0},
++#ifdef _CPHAL_AAL5
++   {"UniNni",              0,          0}
++#endif
++  };
++
++static STATS_DB StatsDb[] =
++  {
++    {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
++    {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
++    {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
++    {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
++    {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
++  };
++#endif /* +GSG 030307 */
++
++#ifdef _CPHAL_CPMAC /* +RC 3.02 */
++static void resetWait(HAL_DEVICE *HalDev)
++  {                                                                  /*+RC3.02*/
++  const int TickReset=64;
++  osfuncSleep((int*)&TickReset);
++  }                                                                  /*+RC3.02*/
++#endif /* +RC 3.02 */
++
++/* I only define the reset base function for the modules
++   that can perform a reset.  The AAL5 and AAL2 modules
++   do not perform a reset, that is done by the shared module
++   CPSAR */
++#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
++/*
++ *  Determines the reset register address to be used for a particular device.
++ *  It will search the current device entry for Locator information.  If the
++ *  device is a root device, there will be no Locator information, and the
++ *  function will find and return the root reset register.  If a Locator value
++ *  is found, the function will search each VLYNQ device entry in the system
++ *  looking for a matching Locator.  Once it finds a VLYNQ device entry with
++ *  a matching Locator, it will extract the "ResetBase" parameter from that
++ *  VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
++ *  @param  ResetBase Pointer to integer address of reset register.
++ *
++ *  @return 0 OK, Non-zero not OK
++ */
++static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
++  {
++   char *DeviceInfo = HalDev->DeviceInfo;
++   char *MyLocator, *NextLocator;
++   int Inst=1;
++   bit32u error_code;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
++      osfuncSioFlush();
++     }
++#endif
++
++   error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
++   if (error_code)
++     {
++      /* if no Locator value, device is on the root, so get the "reset" device */
++      error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
++      if  (error_code)
++        {
++         return(EC_VAL_DEVICE_NOT_FOUND);
++        }
++
++      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
++      if (error_code)
++        {
++         return(EC_VAL_BASE_ADDR_NOT_FOUND);
++        }
++
++      *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
++
++      /* found base address for root device, so we're done */
++      return (EC_NO_ERRORS);
++     }
++    else
++     {
++      /* we have a Locator value, so the device is remote */
++
++      /* Find a vlynq device with a matching locator value */
++      while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
++        {
++         error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
++         if (error_code)
++           {
++            /* no Locator value for this VLYNQ, so move on */
++            continue;
++           }
++         if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
++           {
++            /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
++            error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
++            if (error_code)
++              {
++               return(EC_VAL_BASE_ADDR_NOT_FOUND);
++              }
++            *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
++
++            /* found base address for root device, so we're done */
++            return (EC_NO_ERRORS);
++           }
++         Inst++;
++        } /* while */
++     } /* else */
++
++   return (EC_NO_ERRORS);
++  }
++#endif
++
++#ifndef _CPHAL_AAL2 /* + RC 3.02 */
++static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
++  {
++   bit32u ParmValue;
++   bit32 error_code;
++   char *DeviceInfo = HalDev->DeviceInfo;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
++   if (error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
++     }
++   HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
++
++#ifndef _CPHAL_AAL5
++#ifndef _CPHAL_AAL2
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
++   if(error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
++     }
++   HalDev->ResetBit = ParmValue;
++
++   /* Get reset base address */
++   error_code = ResetBaseGet(HalDev, &ParmValue);
++   if (error_code)
++     return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
++   HalDev->ResetBase = ParmValue;
++#endif
++#endif
++
++#ifndef _CPHAL_CPSAR
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
++   if (error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
++     }
++   HalDev->interrupt = ParmValue;
++#endif
++
++   /* only look for the offset if there is a Locator field, which indicates that
++      the module is a VLYNQ module */
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
++   if (!error_code)
++     {
++      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
++      if (error_code)
++        {
++         return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
++        }
++      HalDev->offset = ParmValue;
++     }
++    else
++      HalDev->offset = 0;
++
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
++   if (!error_code) HalDev->debug = ParmValue;
++
++   return (EC_NO_ERRORS);
++  }
++#endif /* +RC 3.02 */
++
++#ifdef _CPHAL_CPMAC /* +RC 3.02 */
++static void StatsInit(HAL_DEVICE *HalDev)                             /* +() RC3.02 */
++  {
++   /* even though these statistics may be for multiple channels and
++      queues, i need only configure the pointer to the beginning
++      of the array, and I can index from there if necessary */
++
++#ifdef _CPHAL_AAL5
++   StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
++   StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
++   StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
++   StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
++
++   StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
++   StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
++   StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
++   StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
++   StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
++   StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
++   StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
++   StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
++   StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
++   StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
++   StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
++#endif
++
++#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
++   StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
++   StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
++   StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
++   StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
++   StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
++   StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
++   StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
++   StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
++   StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
++   StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
++   StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
++   StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
++   StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
++   StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
++
++   StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
++   StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
++   StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
++   StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
++   StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
++   StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
++   StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
++#ifdef _CPHAL_AAL5
++   StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
++   StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
++   StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
++   StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
++   StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
++   StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
++   StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
++   StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
++   StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
++   StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
++   StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
++   StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
++   StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
++#endif
++#endif
++
++   StatsTable4[0].StatPtr  = &HalDev->dev_base;
++   StatsTable4[1].StatPtr  = &HalDev->offset;
++   StatsTable4[2].StatPtr  = &HalDev->interrupt;
++   StatsTable4[3].StatPtr  = &HalDev->debug;
++   StatsTable4[4].StatPtr  = &HalDev->Inst;
++  }
++#endif /* +RC 3.02 */
++
++#ifndef _CPHAL_CPSAR /* +RC 3.02 */
++#ifndef _CPHAL_AAL2 /* +RC 3.02 */
++/*
++ *  Returns statistics information.
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return 0
++ */
++static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
++  {
++   int Size;
++   bit32u *AddrPtr;
++   char *DataPtr;
++   STATS_TABLE *StatsTable;
++   int i, NumberOfStats;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
++                (bit32u)HalDev, (bit32u)StatPtr);
++      osfuncSioFlush();
++     }
++#endif
++
++   StatsTable = StatsDb[Index].StatTable;
++   NumberOfStats = StatsDb[Index].NumberOfStats;
++
++   Size = sizeof(bit32u)*((NumberOfStats*2)+1);
++   Size += (NumberOfStats*11);
++   *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
++
++   AddrPtr = (bit32u *) *StatPtr;
++   DataPtr = (char *)AddrPtr;
++   DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
++
++   for (i=0; i<NumberOfStats; i++)
++     {
++      *AddrPtr++ = (bit32u)StatsTable[i].StatName;
++      *AddrPtr++ = (bit32u)DataPtr;
++      if (&StatsTable[i].StatPtr[Ch] != 0)
++        {
++         switch(StatsTable[i].DataType)
++           {
++            case 0:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
++              break;
++            case 1:
++              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
++              break;
++            case 2:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
++              break;
++            case 3:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
++              break;
++            case 4:
++              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
++              break;
++            default:
++              /* invalid data type, due to CPHAL programming error */
++              break;
++           }
++        }
++       else
++        {
++         /* invalid statistics pointer, probably was not initialized */
++        }
++      DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
++     }
++
++   *AddrPtr = (bit32u) 0;
++
++   return (EC_NO_ERRORS);
++  }
++#endif /* +RC 3.02 */
++#endif /* +RC 3.02 */
++
++#ifdef _CPHAL_CPMAC
++static void gpioFunctional(int base, int bit)
++  {                                                                  /*+RC3.02*/
++  bit32u GpioEnr = base + 0xC;
++  /*  To make functional, set to zero  */
++  *(volatile bit32u *)(GpioEnr) &= ~(1 << bit);                      /*+RC3.02*/
++  }                                                                  /*+RC3.02*/
++
++
++/*+RC3.02*/
++/* Common function, Checks to see if GPIO should be in functional mode */
++static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
++  {                                                                  /*+RC3.02*/
++  int rc;
++  void *DeviceInfo;
++  char *pszMuxBits;
++  char pszMuxBit[20];
++  char *pszTmp;
++  char szMuxBit[20];
++  char *ptr;
++  int base;
++  int reset_bit;
++  int bit;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++
++  rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
++  if(rc) return;
++  /*  gpio entry found, get GPIO register info and make functional  */
++
++  /* temp copy until FinParmValue fixed */
++  ptr = &szMuxBit[0];
++  while ((*ptr++ = *pszTmp++));
++
++  pszMuxBits = &szMuxBit[0];
++
++  rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
++  if(rc) return;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
++  if(rc) return;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
++  if(rc) return;
++
++  /* If GPIO still in reset, then exit  */
++  if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
++    return;
++  /*  format for gpio_mux is  gpio_mux = <int>;<int>;<int>...*/
++  while (*pszMuxBits)
++    {
++    pszTmp = &pszMuxBit[0];
++    if(*pszMuxBits == ';') pszMuxBits++;
++    while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
++      {
++      osfuncSioFlush();
++      /*If value not a number, skip */
++      if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
++        pszMuxBits++;
++      else
++        *pszTmp++ = *pszMuxBits++;
++      }
++    *pszTmp = '\0';
++    bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
++    gpioFunctional(base, bit);
++    resetWait(HalDev);  /* not sure if this is needed */
++    }
++  }                                                                  /*+RC3.02*/
++#endif  /* CPMAC  */
++
++#ifdef _CPHAL_AAL5
++const char hcSarFrequency[] = "SarFreq";
++#endif
++
++#endif  /* _INC  */
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.h
+--- linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.h	2005-07-12 02:48:41.996601000 +0200
+@@ -0,0 +1,79 @@
++#ifndef _INC_CPCOMMON_H
++#define _INC_CPCOMMON_H
++
++#define VOLATILE32(addr)  (*(volatile bit32u *)(addr))
++#ifndef dbgPrintf
++#define dbgPrintf HalDev->OsFunc->Printf
++#endif
++
++#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
++
++#define DBG(level)  (HalDev->debug & (1<<(level)))
++/*
++#define DBG0()      DBG(0)
++#define DBG1()      DBG(1)
++#define DBG2()      DBG(2)
++#define DBG3()      DBG(3)
++#define DBG4()      DBG(4)
++#define DBG5()      DBG(5)
++#define DBG6()      DBG(6)
++#define DBG7()      DBG(7)
++*/
++
++/*
++ *  List of defined actions for use with Control().
++ */
++typedef enum 
++  {
++   enGET=0,     /**< Get the value associated with a key */
++   enSET,       /**< Set the value associates with a key */
++   enCLEAR,     /**<Clear the value */ 
++   enNULL       /**< No data action, used to initiate a service or send a message */
++  }ACTION;
++
++/*
++ *  Enumerated hardware states.
++ */
++typedef enum
++  {
++   enConnected=1, enDevFound, enInitialized, enOpened
++  }DEVICE_STATE;
++
++typedef enum 
++  {
++   enCommonStart=0,
++   /* General  */
++   enOff, enOn, enDebug, 
++   /* Module General */
++   enCpuFreq, 
++   enStatus,
++   enCommonEnd
++   }COMMON_KEY;
++
++typedef struct
++  {
++   const char  *strKey;
++   int  enKey;
++  }CONTROL_KEY;
++
++typedef struct
++  {
++   char *StatName;
++   unsigned int *StatPtr;
++   int DataType; /* 0: int, 1: hex int, 2:channel data */
++  }STATS_TABLE;
++
++typedef struct
++  {
++   int NumberOfStats;
++   STATS_TABLE *StatTable;
++  }STATS_DB;
++
++#define osfuncSioFlush()    HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
++#define osfuncSleep(Ticks)  HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
++#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
++
++#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
++
++#endif
++
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpmac.c
+--- linux.old/drivers/net/avalanche_cpmac/cpmac.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c	2005-07-22 01:03:12.609318544 +0200
+@@ -0,0 +1,2504 @@
++/******************************************************************************
++ * FILE PURPOSE:    CPMAC Linux Network Device Driver Source
++ ******************************************************************************
++ * FILE NAME:       cpmac.c
++ *
++ * DESCRIPTION:     CPMAC Network Device Driver Source
++ *
++ * REVISION HISTORY:
++ *
++ * Date           Description                               Author
++ *-----------------------------------------------------------------------------
++ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
++ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
++ * 30 Sep 2003    Updates for LED, Reset stats              Suraj S Iyer
++ * 
++ * (C) Copyright 2003, Texas Instruments, Inc
++ *******************************************************************************/
++#include <linux/kernel.h> 
++#include <linux/module.h> 
++#include <linux/init.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/delay.h>     
++#include <linux/spinlock.h>
++#include <linux/proc_fs.h>
++#include <linux/ioport.h>
++#include <asm/io.h>
++
++#include <linux/skbuff.h>
++
++#include <asm/mips-boards/prom.h>
++#include <linux/string.h>
++#include <asm/uaccess.h>
++#include <linux/config.h>
++#include <asm/ar7/if_port.h>
++
++extern void build_psp_config(void);
++extern void psp_config_cleanup(void);
++
++#include "cpmacHalLx.h"
++#include "cpmac.h"
++
++static struct net_device *last_cpmac_device = NULL;
++static int    cpmac_devices_installed = 0;
++
++void xdump( u_char*  cp, int  length, char*  prefix );
++
++unsigned int  cpmac_cpu_freq = 0;
++
++char cpmac_version[] = "1.5";
++
++char l3_align_array[]            = {0x02, 0x01, 0x00, 0x03};
++#define L3_ALIGN(i)                l3_align_array[i]
++
++char add_for_4byte_align[]       = {0x04, 0x03, 0x02, 0x05};
++#define ADD_FOR_4BYTE_ALIGN(i)     add_for_4byte_align[i]
++
++
++#define TPID                       0x8100
++#define IS_802_1Q_FRAME(byte_ptr)  (*(unsigned short*)byte_ptr == TPID)
++#define TPID_START_OFFSET          12
++#define TCI_START_OFFSET           14
++#define TCI_LENGTH                 2
++#define TPID_LENGTH                2
++#define TPID_END_OFFSET            (TPID_START_OFFSET + TPID_LENGTH)
++#define TCI_END_OFFSET             (TCI_START_OFFSET  + TCI_LENGTH)
++#define IS_VALID_VLAN_ID(byte_ptr) ((*(unsigned short*)byte_ptr) && 0xfff != 0)
++#define MAX_CLASSES                8
++#define MAX_USER_PRIORITY          8
++#define CONTROL_802_1Q_SIZE        (TCI_LENGTH + TPID_LENGTH)
++
++unsigned char user_priority_to_traffic_class_map[MAX_CLASSES][MAX_USER_PRIORITY] = 
++{ 
++  {0, 0, 0, 1, 1, 1, 1, 2}, 
++  {0, 0, 0, 0, 0, 0, 0, 0}, 
++  {0, 0, 0, 0, 0, 0, 0, 1}, 
++  {0, 0, 0, 1, 1, 2, 2, 3}, 
++  {0, 1, 1, 2, 2, 3, 3, 4}, 
++  {0, 1, 1, 2, 3, 4, 4, 5}, 
++  {0, 1, 2, 3, 4, 5, 5, 6}, 
++  {0, 1, 2, 3, 4, 5, 6, 7}
++};
++
++#define GET_802_1P_CHAN(x,y) user_priority_to_traffic_class_map[x][(y & 0xe0)]
++
++#if defined(CONFIG_MIPS_SEAD2)
++unsigned long temp_base_address[2] = {0xa8610000, 0xa8612800};
++unsigned long temp_reset_value[2] = { 1<< 17,1<<21};
++#define RESET_REG_PRCR   (*(volatile unsigned int *)((0xa8611600 + 0x0)))
++#define VERSION(base)   (*(volatile unsigned int *)(((base)|0xa0000000) + 0x0))
++#endif
++
++MODULE_AUTHOR("Maintainer: Suraj S Iyer <ssiyer@ti.com>");
++MODULE_DESCRIPTION("Driver for TI CPMAC");
++
++static int cfg_link_speed = 0;
++MODULE_PARM(cfg_link_speed, "i");
++MODULE_PARM_DESC(cfg_link_speed, "Fixed speed of the Link: <100/10>");
++
++static char *cfg_link_mode = NULL;
++MODULE_PARM(cfg_link_mode, "1-3s");
++MODULE_PARM_DESC(cfg_link_mode, "Fixed mode of the Link: <fd/hd>");
++
++int cpmac_debug_mode = 0;
++MODULE_PARM(debug_mode, "i");
++MODULE_PARM_DESC(debug_mode, "Turn on the debug info: <0/1>. Default is 0 (off)");
++
++#define dbgPrint if (cpmac_debug_mode) printk
++#define errPrint printk
++
++static int g_cfg_start_link_params = CFG_START_LINK_SPEED;
++static int g_init_enable_flag      = 0;
++static int cfg_start_link_speed;
++static int cpmac_max_frame_size;
++
++static struct net_device *g_dev_array[2];
++static struct proc_dir_entry *gp_stats_file = NULL;
++
++//-----------------------------------------------------------------------------
++// Statistics related private functions.
++//----------------------------------------------------------------------------- 
++static int  cpmac_p_update_statistics(struct net_device *p_dev, char *buf, int limit, int *len);
++static int  cpmac_p_read_rfc2665_stats(char *buf, char **start, off_t offset, int count, int *eof, void *data);
++static int  cpmac_p_read_link(char *buf, char **start, off_t offset, int count, int *eof, void *data);
++static int  cpmac_p_read_stats(char* buf, char **start, off_t offset, int count, int *eof, void *data);
++static int  cpmac_p_write_stats (struct file *fp, const char * buf, unsigned long count, void * data);
++static int  cpmac_p_reset_statistics (struct net_device *p_dev);
++static int  cpmac_p_get_version(char *buf, char **start, off_t offset, int count, int *eof, void *data);
++
++static int  cpmac_p_detect_manual_cfg(int, char*, int);
++static int  cpmac_p_process_status_ind(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
++
++//-----------------------------------------------------------------------------
++// Timer related private functions.
++//-----------------------------------------------------------------------------
++static int  cpmac_p_timer_init(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
++// static int  cpmac_timer_cleanup(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
++static void cpmac_p_tick_timer_expiry(unsigned long p_cb_param);
++inline static int cpmac_p_start_timer(struct timer_list *p_timer, unsigned int delay_ticks);
++static int  cpmac_p_stop_timer(struct timer_list *p_timer);
++
++//------------------------------------------------------------------------------
++// Device configuration and setup related private functions.
++//------------------------------------------------------------------------------
++static int cpmac_p_probe_and_setup_device(CPMAC_PRIVATE_INFO_T *p_cpmac_priv, unsigned long *p_dev_flags);
++static int cpmac_p_setup_driver_params(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
++inline static int cpmac_p_rx_buf_setup(CPMAC_RX_CHAN_INFO_T *p_rx_chan);
++
++//-----------------------------------------------------------------------------
++// Net device related private functions.
++//-----------------------------------------------------------------------------
++static int  cpmac_dev_init(struct net_device *p_dev);
++static int  cpmac_dev_open( struct net_device *dev );
++static int  cpmac_dev_close(struct net_device *p_dev);
++static void cpmac_dev_mcast_set(struct net_device *p_dev);
++static int cpmac_dev_set_mac_addr(struct net_device *p_dev,void * addr);
++static int  cpmac_dev_tx( struct sk_buff *skb, struct net_device *p_dev);
++static struct net_device_stats *cpmac_dev_get_net_stats (struct net_device *dev);
++
++static int cpmac_p_dev_enable( struct net_device *p_dev);
++
++
++
++/* Max. Reserved headroom in front of each packet so that the headers can be added to
++ * a packet. Worst case scenario would be PPPoE + 2684 LLC Encapsulation + Ethernet
++ * header. */
++#define MAX_RESERVED_HEADROOM       20
++
++/* This is the MAX size of the static buffer for pure data. */
++#define MAX_SIZE_STATIC_BUFFER      1600
++
++typedef struct DRIVER_BUFFER
++{
++	/* Pointer to the allocated data buffer. This is the static data buffer 
++     * allocated for the TI-Cache. 60 bytes out of the below buffer are required
++     * by the SKB shared info. We always reserve at least MAX_RESERVED_HEADROOM bytes 
++     * so that the packets always have sufficient headroom. */
++	char					ptr_buffer[MAX_SIZE_STATIC_BUFFER + MAX_RESERVED_HEADROOM + 60];
++
++	/* List of the driver buffers. */
++	struct DRIVER_BUFFER*	ptr_next;
++}DRIVER_BUFFER;
++
++typedef struct DRIVER_BUFFER_MCB
++{
++	/* List of the driver buffers. */
++	DRIVER_BUFFER*	ptr_available_driver_buffers;
++
++    /* The number of available buffers. */
++    int                     num_available_buffers;
++}DRIVER_BUFFER_MCB;
++
++DRIVER_BUFFER_MCB	driver_mcb;
++int                 hybrid_mode = 0;
++
++static union {
++	struct sk_buff_head	list;
++	char			pad[SMP_CACHE_BYTES];
++} skb_head_pool[NR_CPUS];
++
++/**************************************************************************
++ * FUNCTION NAME : ti_release_skb
++ **************************************************************************
++ * DESCRIPTION   :
++ *  This function is called from the ti_alloc_skb when there were no more
++ *  data buffers available. The allocated SKB had to released back to the 
++ *  data pool. The reason why this function was moved from the fast path 
++ *  below was because '__skb_queue_head' is an inline function which adds
++ *  a large code chunk on the fast path.
++ *
++ * NOTES         :
++ *  This function is called with interrupts disabled. 
++ **************************************************************************/
++static void ti_release_skb (struct sk_buff_head* list, struct sk_buff* skb)
++{
++    __skb_queue_head(list, skb);
++    return;
++}
++
++/**************************************************************************
++ * FUNCTION NAME : ti_alloc_skb
++ **************************************************************************
++ * DESCRIPTION   :
++ *  The function is called to allocate memory from the static allocated 
++ *  TI-Cached memory pool.
++ *
++ * RETURNS       :
++ *      Allocated static memory buffer - Success
++ *      NULL                           - Error.
++ **************************************************************************/
++struct sk_buff *ti_alloc_skb(unsigned int size,int gfp_mask)
++{
++    register struct sk_buff*    skb;
++    unsigned long               flags;
++	struct sk_buff_head*        list;
++	DRIVER_BUFFER*	            ptr_node = NULL;
++
++    /* Critical Section Begin: Lock out interrupts. */
++    local_irq_save(flags);
++
++    /* Get the SKB Pool list associated with the processor and dequeue the head. */
++    list = &skb_head_pool[smp_processor_id()].list;
++    skb = __skb_dequeue(list);
++
++    /* Align the data size. */
++    size = SKB_DATA_ALIGN(size);
++
++    /* Did we get one. */
++    if (skb != NULL)
++    {
++        /* YES. Now get a data block from the head of statically allocated block. */
++        ptr_node = driver_mcb.ptr_available_driver_buffers;
++	    if (ptr_node != NULL)
++        {
++            /* YES. Got a data block. Advance the free list pointer to the next available buffer. */
++	        driver_mcb.ptr_available_driver_buffers = ptr_node->ptr_next;
++            ptr_node->ptr_next = NULL;
++
++            /* Decrement the number of available data buffers. */
++            driver_mcb.num_available_buffers = driver_mcb.num_available_buffers - 1;
++        }
++        else
++        {
++          /* NO. Was unable to get a data block. So put the SKB back on the free list. 
++           * This is slow path. */
++#ifdef DEBUG_SKB 
++           printk ("DEBUG: No Buffer memory available: Number of free buffer:%d.\n",
++                   driver_mcb.num_available_buffers);
++#endif
++           ti_release_skb (list, skb);
++        }
++    }
++
++    /* Critical Section End: Unlock interrupts. */
++    local_irq_restore(flags);
++
++    /* Did we get an SKB and data buffer. Proceed only if we were succesful in getting both else drop */
++    if (skb != NULL && ptr_node != NULL)
++    {
++       	/* XXX: does not include slab overhead */ 
++        skb->truesize = size + sizeof(struct sk_buff);
++ 
++        /* Load the data pointers. */
++     	skb->head = ptr_node->ptr_buffer;
++        skb->data = ptr_node->ptr_buffer + MAX_RESERVED_HEADROOM;
++	    skb->tail = ptr_node->ptr_buffer + MAX_RESERVED_HEADROOM;
++        skb->end  = ptr_node->ptr_buffer + size + MAX_RESERVED_HEADROOM;
++
++	    /* Set up other state */
++    	skb->len    = 0;
++    	skb->cloned = 0;
++        skb->data_len = 0;
++    
++        /* Mark the SKB indicating that the SKB is from the TI cache. */
++        skb->cb[45] = 1;
++
++    	atomic_set(&skb->users, 1); 
++    	atomic_set(&(skb_shinfo(skb)->dataref), 1);
++        skb_shinfo(skb)->nr_frags = 0;
++	    skb_shinfo(skb)->frag_list = NULL;
++        return skb;
++    }
++    else
++    {
++        /* Control comes here only when there is no statically allocated data buffers
++         * available. This case is handled using the mode selected
++         *
++         * 1. Hybrid Mode.
++         *  In that case lets jump to the old allocation code. This way we
++         *  can allocate a small number of data buffers upfront and the rest will hit
++         *  this portion of the code, which is slow path. Note the number of hits here
++         *  should be kept as low as possible to satisfy performance requirements. 
++         *
++         * 2. Pure Static Mode.
++         *  Return NULL the user should have tuned the number of static buffers for
++         *  worst case scenario. So return NULL and let the drivers handle the error. */
++        if (hybrid_mode == 1)
++        {
++            /* Hybrid Mode: Old allocation. */
++            return dev_alloc_skb(size);
++        }
++        else
++        {
++            /* Pure Static Mode: No buffers available. */
++            return NULL;
++        }
++    }
++}
++
++/**************************************************************************
++ * FUNCTION NAME : ti_skb_release_fragment
++ **************************************************************************
++ * DESCRIPTION   :
++ *  This function is called to release fragmented packets. This is NOT in 
++ *  the fast path and this function requires some work. 
++ **************************************************************************/
++static void ti_skb_release_fragment(struct sk_buff *skb)
++{
++    if (skb_shinfo(skb)->nr_frags)
++    {
++        /* PANKAJ TODO: This portion has not been tested. */
++	    int i;
++#ifdef DEBUG_SKB 
++        printk ("DEBUG: Releasing fragments in TI-Cached code.\n");
++#endif
++		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
++		    printk ("DEBUG: Fragmented Page = 0x%p.\n", skb_shinfo(skb)->frags[i].page);
++    }
++
++    /* Check if there were any fragments present and if so clean all the SKB's. 
++     * This is required to recursivly clean the SKB's. */
++	if (skb_shinfo(skb)->frag_list)
++	    skb_drop_fraglist(skb);
++
++    return;
++}
++
++/**************************************************************************
++ * FUNCTION NAME : ti_skb_release_data
++ **************************************************************************
++ * DESCRIPTION   :
++ *  The function is called to release the SKB back into the TI-Cached static
++ *  memory pool. 
++ **************************************************************************/
++static void ti_skb_release_data(struct sk_buff *skb)
++{
++    DRIVER_BUFFER*	ptr_node;
++    unsigned long   flags;
++
++    /* The SKB data can be cleaned only if the packet has not been cloned and we
++     * are the only one holding a reference to the data. */
++	if (!skb->cloned || atomic_dec_and_test(&(skb_shinfo(skb)->dataref)))
++    {
++        /* Are there any fragments associated with the SKB ?*/
++		if ((skb_shinfo(skb)->nr_frags != 0) || (skb_shinfo(skb)->frag_list != NULL))
++        {
++            /* Slow Path: Try and clean up the fragments. */
++            ti_skb_release_fragment (skb);
++        }
++
++        /* Cleanup the SKB data memory. This is fast path. */
++        ptr_node = (DRIVER_BUFFER *)skb->head;
++
++        /* Critical Section: Lock out interrupts. */
++        local_irq_save(flags);
++
++        /* Add the data buffer to the list of available buffers. */
++        ptr_node->ptr_next = driver_mcb.ptr_available_driver_buffers;
++	    driver_mcb.ptr_available_driver_buffers = ptr_node;
++
++        /* Increment the number of available data buffers. */
++        driver_mcb.num_available_buffers = driver_mcb.num_available_buffers + 1;
++
++        /* Criticial Section: Unlock interrupts. */
++        local_irq_restore(flags);
++	}
++    return;
++}
++
++
++
++
++static unsigned char str2hexnum(unsigned char c)
++{
++        if(c >= '0' && c <= '9')
++                return c - '0';
++        if(c >= 'a' && c <= 'f')
++                return c - 'a' + 10;
++        if(c >= 'A' && c <= 'F')
++                return c - 'A' + 10;
++        return 0; 
++}
++
++static void str2eaddr(unsigned char *ea, unsigned char *str)
++{
++    int i;
++    unsigned char num;
++    for(i = 0; i < 6; i++) {
++        if((*str == '.') || (*str == ':'))
++            str++;
++        num = str2hexnum(*str++) << 4;
++        num |= (str2hexnum(*str++));
++        ea[i] = num;
++    }
++}
++
++//-----------------------------------------------------------------------------
++// Statistics related private functions.
++//-----------------------------------------------------------------------------
++static int cpmac_p_update_statistics(struct net_device *p_dev, char *buf, int limit, int *p_len)
++{
++    int                 ret_val   = -1;
++    unsigned long rx_hal_errors   = 0;
++    unsigned long rx_hal_discards = 0;
++    unsigned long tx_hal_errors   = 0;
++    unsigned long ifOutDiscards   = 0;
++    unsigned long ifInDiscards    = 0;
++    unsigned long ifOutErrors     = 0;
++    unsigned long ifInErrors      = 0;
++
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
++    CPMAC_DEVICE_MIB_T   *p_device_mib = p_cpmac_priv->device_mib;
++    CPMAC_DRV_STATS_T    *p_stats      = p_cpmac_priv->stats;
++    CPMAC_DEVICE_MIB_T   local_mib;
++    CPMAC_DEVICE_MIB_T   *p_local_mib  = &local_mib;
++
++    struct net_device_stats *p_net_dev_stats = &p_cpmac_priv->net_dev_stats;
++
++    int                 len      = 0;
++    int  dev_mib_elem_count      = 0;
++
++    /* do not access the hardware if it is in the reset state. */
++    if(!test_bit(0, &p_cpmac_priv->set_to_close))
++    {
++        if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsDump", "Get",
++ 			                 p_local_mib) != 0)
++        {
++            errPrint("The stats dump for %s is failing.\n", p_dev->name);
++            return(ret_val);
++        }
++
++        p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsClear", "Set", NULL);
++
++        dev_mib_elem_count = sizeof(CPMAC_DEVICE_MIB_T)/sizeof(unsigned long);
++
++        /* Update the history of the stats. This takes care of any reset of the 
++         * device and stats that might have taken place during the life time of 
++         * the driver. 
++         */
++        while(dev_mib_elem_count--)
++        {
++            *((unsigned long*) p_device_mib + dev_mib_elem_count) += 
++            *((unsigned long*) p_local_mib  + dev_mib_elem_count); 
++        }
++    }
++
++    /* RFC2665, section 3.2.7, page 9 */
++    rx_hal_errors          = p_device_mib->ifInFragments       +
++	                     p_device_mib->ifInCRCErrors       +
++	                     p_device_mib->ifInAlignCodeErrors +
++	                     p_device_mib->ifInJabberFrames;
++
++    /* RFC2233 */
++    rx_hal_discards        = p_device_mib->ifRxDMAOverruns;
++
++    /* RFC2665, section 3.2.7, page 9 */
++    tx_hal_errors          = p_device_mib->ifExcessiveCollisionFrames +
++                             p_device_mib->ifLateCollisions           +
++                             p_device_mib->ifCarrierSenseErrors       +
++                             p_device_mib->ifOutUnderrun;
++
++    /* if not set, the short frames (< 64 bytes) are considered as errors */
++    if(!p_cpmac_priv->flags & IFF_PRIV_SHORT_FRAMES)
++        rx_hal_errors += p_device_mib->ifInUndersizedFrames;
++
++    /* if not set, the long frames ( > 1518) are considered as errors 
++     * RFC2665, section 3.2.7, page 9. */
++    if(!p_cpmac_priv->flags & IFF_PRIV_JUMBO_FRAMES)
++        rx_hal_errors += p_device_mib->ifInOversizedFrames;
++
++    /* if not in promiscous, then non addr matching frames are discarded */
++    /* CPMAC 2.0 Manual Section 2.8.1.14 */
++    if(!p_dev->flags & IFF_PROMISC)
++    {
++        ifInDiscards  +=  p_device_mib->ifInFilteredFrames;
++    }
++
++     /* total rx discards = hal discards + driver discards. */
++    ifInDiscards  = rx_hal_discards + p_net_dev_stats->rx_dropped;
++    ifInErrors    = rx_hal_errors;
++
++    ifOutErrors   = tx_hal_errors;
++    ifOutDiscards = p_net_dev_stats->tx_dropped;
++
++    /* Let us update the net device stats struct. To be updated in the later releases.*/
++    p_cpmac_priv->net_dev_stats.rx_errors  = ifInErrors;
++    p_cpmac_priv->net_dev_stats.collisions = p_device_mib->ifCollisionFrames;
++
++    if(buf == NULL || limit == 0)
++    {
++        return(0);
++    }
++
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %ld\n", "ifSpeed",                                 (long)p_cpmac_priv->link_speed);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "dot3StatsDuplexStatus",                   (long)p_cpmac_priv->link_mode);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifAdminStatus",                           (long)(p_dev->flags & IFF_UP ? 1:2));
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOperStatus",                            (long)(((p_dev->flags & IFF_UP) && netif_carrier_ok(p_dev)) ? 1:2));
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifLastChange",                            p_stats->start_tick);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInDiscards",                            ifInDiscards);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInErrors",                              ifInErrors);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutDiscards",                           ifOutDiscards);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutErrors",                             ifOutErrors);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInGoodFrames",                          p_device_mib->ifInGoodFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInBroadcasts",                          p_device_mib->ifInBroadcasts);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInMulticasts",                          p_device_mib->ifInMulticasts);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInPauseFrames",                         p_device_mib->ifInPauseFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInCRCErrors",                           p_device_mib->ifInCRCErrors);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInAlignCodeErrors",                     p_device_mib->ifInAlignCodeErrors);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInOversizedFrames",                     p_device_mib->ifInOversizedFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInJabberFrames",                        p_device_mib->ifInJabberFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInUndersizedFrames",                    p_device_mib->ifInUndersizedFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInFragments",                           p_device_mib->ifInFragments);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInFilteredFrames",                      p_device_mib->ifInFilteredFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInQosFilteredFrames",                   p_device_mib->ifInQosFilteredFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInOctets",                              p_device_mib->ifInOctets);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutGoodFrames",                         p_device_mib->ifOutGoodFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutBroadcasts",                         p_device_mib->ifOutBroadcasts);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutMulticasts",                         p_device_mib->ifOutMulticasts);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutPauseFrames",                        p_device_mib->ifOutPauseFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifDeferredTransmissions",                 p_device_mib->ifDeferredTransmissions);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifCollisionFrames",                       p_device_mib->ifCollisionFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifSingleCollisionFrames",                 p_device_mib->ifSingleCollisionFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifMultipleCollisionFrames",               p_device_mib->ifMultipleCollisionFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifExcessiveCollisionFrames",              p_device_mib->ifExcessiveCollisionFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifLateCollisions",                        p_device_mib->ifLateCollisions);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutUnderrun",                           p_device_mib->ifOutUnderrun);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifCarrierSenseErrors",                    p_device_mib->ifCarrierSenseErrors);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutOctets",                             p_device_mib->ifOutOctets);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "if64OctetFrames",                         p_device_mib->if64OctetFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "if65To127POctetFrames",                   p_device_mib->if65To127OctetFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "if128To255OctetFrames",                   p_device_mib->if128To255OctetFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "if256To511OctetFrames",                   p_device_mib->if256To511OctetFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "if512To1023OctetFrames",                  p_device_mib->if512To1023OctetFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "if1024ToUpOctetFrames",                   p_device_mib->if1024ToUPOctetFrames);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifNetOctets",                             p_device_mib->ifNetOctets);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxSofOverruns",                         p_device_mib->ifRxSofOverruns);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxMofOverruns",                         p_device_mib->ifRxMofOverruns);
++    if(len <= limit)
++        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxDMAOverruns",                         p_device_mib->ifRxDMAOverruns);
++
++    *p_len = len;
++
++    return(0);
++}
++
++
++static int cpmac_p_read_rfc2665_stats(char* buf, char **start, off_t offset, 
++		               int count, int *eof, void *data)
++{
++    int limit = count - 80;
++    int len   = 0;
++    struct net_device *p_dev = (struct net_device*)data;
++
++    cpmac_p_update_statistics(p_dev, buf, limit, &len);
++
++    *eof = 1;
++
++    return len;
++}
++
++static int cpmac_p_read_link(char *buf, char **start, off_t offset, int count, 
++                             int *eof, void *data)
++{
++    int len = 0;
++
++    struct net_device    *p_dev;
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv;
++    struct net_device    *cpmac_dev_list[cpmac_devices_installed];
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal;
++
++    int                  i;
++    int                  phy;            /* what phy are we using? */
++
++    len += sprintf(buf+len, "CPMAC devices = %d\n",cpmac_devices_installed);
++
++    p_dev        = last_cpmac_device;
++
++    /* Reverse the the device link list to list eth0,eth1...in correct order */
++    for(i=0; i< cpmac_devices_installed; i++)
++    {
++        cpmac_dev_list[cpmac_devices_installed -(i+1)] = p_dev;
++        p_cpmac_priv = p_dev->priv;
++        p_dev = p_cpmac_priv->next_device;
++    }
++
++    for(i=0; i< cpmac_devices_installed; i++)
++    {
++        p_dev        = cpmac_dev_list[i];
++        p_cpmac_priv = p_dev->priv;
++        p_drv_hal    = p_cpmac_priv->drv_hal;
++
++        /*  This prints them out from high to low because of how the devices are linked */
++        if(netif_carrier_ok(p_dev))
++        {
++            p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "PhyNum", "Get", &phy);
++
++
++            len += sprintf(buf+len,"eth%d: Link State: %s    Phy:0x%x, Speed = %s, Duplex = %s\n",
++                           p_cpmac_priv->instance_num, "UP", phy, 
++                           (p_cpmac_priv->link_speed == 100000000) ? "100":"10",
++                           (p_cpmac_priv->link_mode  == 2) ? "Half":"Full");
++
++        }
++        else
++            len += sprintf(buf+len,"eth%d: Link State: DOWN\n",p_cpmac_priv->instance_num);
++
++        p_dev = p_cpmac_priv->next_device;
++    }
++
++    return len;
++
++}
++
++static int cpmac_p_read_stats(char* buf, char **start, off_t offset, int count,
++                              int *eof, void *data)
++{
++    struct net_device *p_dev = last_cpmac_device;
++    int                len   = 0;
++    int                limit = count - 80;
++    int i;
++    struct net_device     *cpmac_dev_list[cpmac_devices_installed];
++    CPMAC_PRIVATE_INFO_T  *p_cpmac_priv;
++    CPMAC_DEVICE_MIB_T    *p_device_mib;
++
++    /* Reverse the the device link list to list eth0,eth1...in correct order */
++    for(i=0; i< cpmac_devices_installed; i++)
++    {
++        cpmac_dev_list[cpmac_devices_installed - (i+1)] = p_dev;
++        p_cpmac_priv = p_dev->priv;
++        p_dev = p_cpmac_priv->next_device;
++    }
++
++    for(i=0; i< cpmac_devices_installed; i++)
++    {
++        p_dev = cpmac_dev_list[i];
++
++        if(!p_dev)
++          goto proc_error;
++
++        /* Get Stats */
++        cpmac_p_update_statistics(p_dev, NULL, 0, NULL);
++
++        p_cpmac_priv = p_dev->priv;
++        p_device_mib = p_cpmac_priv->device_mib;
++
++        /* Transmit stats */
++        if(len<=limit)
++          len+= sprintf(buf+len, "\nCpmac %d, Address %lx\n",i+1, p_dev->base_addr);
++        if(len<=limit)
++          len+= sprintf(buf+len, " Transmit Stats\n");
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Tx Valid Bytes Sent        :%lu\n",p_device_mib->ifOutOctets);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Good Tx Frames (Hardware)  :%lu\n",p_device_mib->ifOutGoodFrames);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Good Tx Frames (Software)  :%lu\n",p_cpmac_priv->net_dev_stats.tx_packets);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Good Tx Broadcast Frames   :%lu\n",p_device_mib->ifOutBroadcasts);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Good Tx Multicast Frames   :%lu\n",p_device_mib->ifOutMulticasts);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Pause Frames Sent          :%lu\n",p_device_mib->ifOutPauseFrames);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Collisions                 :%lu\n",p_device_mib->ifCollisionFrames);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Tx Error Frames            :%lu\n",p_cpmac_priv->net_dev_stats.tx_errors);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Carrier Sense Errors       :%lu\n",p_device_mib->ifCarrierSenseErrors);
++        if(len<=limit)
++          len+= sprintf(buf+len, "\n");
++
++
++        /* Receive Stats */
++        if(len<=limit)
++          len+= sprintf(buf+len, "\nCpmac %d, Address %lx\n",i+1,p_dev->base_addr);
++        if(len<=limit)
++          len+= sprintf(buf+len, " Receive Stats\n");
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Rx Valid Bytes Received    :%lu\n",p_device_mib->ifInOctets);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Good Rx Frames (Hardware)  :%lu\n",p_device_mib->ifInGoodFrames);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Good Rx Frames (Software)  :%lu\n",p_cpmac_priv->net_dev_stats.rx_packets);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Good Rx Broadcast Frames   :%lu\n",p_device_mib->ifInBroadcasts);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Good Rx Multicast Frames   :%lu\n",p_device_mib->ifInMulticasts);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Pause Frames Received      :%lu\n",p_device_mib->ifInPauseFrames);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Rx CRC Errors              :%lu\n",p_device_mib->ifInCRCErrors);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Rx Align/Code Errors       :%lu\n",p_device_mib->ifInAlignCodeErrors);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Rx Jabbers                 :%lu\n",p_device_mib->ifInOversizedFrames);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Rx Filtered Frames         :%lu\n",p_device_mib->ifInFilteredFrames);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Rx Fragments               :%lu\n",p_device_mib->ifInFragments);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Rx Undersized Frames       :%lu\n",p_device_mib->ifInUndersizedFrames);
++        if(len<=limit)
++          len+= sprintf(buf+len, "   Rx Overruns                :%lu\n",p_device_mib->ifRxDMAOverruns);
++    }
++
++
++    return len;
++
++ proc_error:
++    *eof=1;
++    return len;
++}
++
++static int cpmac_p_write_stats (struct file *fp, const char * buf, unsigned long count, void * data)
++{
++	char local_buf[31];
++        int  ret_val = 0;
++
++	if(count > 30)
++	{
++		printk("Error : Buffer Overflow\n");
++		printk("Use \"echo 0 > cpmac_stat\" to reset the statistics\n");
++		return -EFAULT;
++	}
++
++	copy_from_user(local_buf,buf,count);
++	local_buf[count-1]='\0'; /* Ignoring last \n char */
++        ret_val = count;
++	
++	if(strcmp("0",local_buf)==0)
++	{
++            struct net_device *p_dev = last_cpmac_device;
++            int i;
++            struct net_device     *cpmac_dev_list[cpmac_devices_installed];
++            CPMAC_PRIVATE_INFO_T  *p_cpmac_priv;
++
++            /* Valid command */
++	    printk("Resetting statistics for CPMAC interface.\n");
++
++            /* Reverse the the device link list to list eth0,eth1...in correct order */
++            for(i=0; i< cpmac_devices_installed; i++)
++            {
++                cpmac_dev_list[cpmac_devices_installed - (i+1)] = p_dev;
++                p_cpmac_priv = p_dev->priv;
++                p_dev = p_cpmac_priv->next_device;
++            }
++
++            for(i=0; i< cpmac_devices_installed; i++)
++             {
++                p_dev = cpmac_dev_list[i];
++                if(!p_dev)
++                {
++                    ret_val = -EFAULT;
++                    break;
++                }
++
++                cpmac_p_reset_statistics(p_dev);
++            }
++	}
++	else
++	{
++		printk("Error: Unknown operation on cpmac statistics\n");
++		printk("Use \"echo 0 > cpmac_stats\" to reset the statistics\n");
++		return -EFAULT;
++	}
++	
++	return ret_val;
++}
++
++static int cpmac_p_reset_statistics(struct net_device *p_dev)
++{
++    int                       ret_val  = 0;
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
++
++    memset(p_cpmac_priv->device_mib, 0, sizeof(CPMAC_DEVICE_MIB_T));
++    memset(p_cpmac_priv->stats, 0, sizeof(CPMAC_DRV_STATS_T));
++    memset(&p_cpmac_priv->net_dev_stats, 0, sizeof(struct net_device_stats));
++
++    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsClear", "Set", NULL);
++
++    return(ret_val);
++}
++
++static int cpmac_p_get_version(char* buf, char **start, off_t offset, int count,int *eof, void *data)
++{
++    int  len                           = 0;
++    int  limit                         = count - 80;
++    char *hal_version                  = NULL;
++    struct net_device *p_dev           = last_cpmac_device;
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
++
++    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "Version", "Get", &hal_version);
++
++    len += sprintf(buf+len, "Texas Instruments CPMAC driver version: %s\n", cpmac_version);
++
++    if(len <= limit && hal_version)
++        len += sprintf(buf+len, "Texas Instruments CPMAC HAL version: %s\n", hal_version);
++
++    return len;
++}
++
++static struct net_device_stats *cpmac_dev_get_net_stats (struct net_device *p_dev)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = (CPMAC_PRIVATE_INFO_T *) p_dev->priv;
++
++    cpmac_p_update_statistics(p_dev, NULL, 0, NULL);
++
++    return &p_cpmac_priv->net_dev_stats;
++}
++
++static int cpmac_p_detect_manual_cfg(int link_speed, char* link_mode, int debug)
++{
++    char *pSpeed = NULL;
++
++    if(debug == 1)
++    {
++        cpmac_debug_mode = 1;
++        dbgPrint("Enabled the debug print.\n");
++    }
++
++    if(!link_speed && !link_mode)
++    {
++        dbgPrint("No manual link params, defaulting to auto negotiation.\n");
++        return (0);
++    }
++
++    if(!link_speed || (link_speed != 10 && link_speed != 100))
++    {
++        dbgPrint("Invalid or No value of link speed specified, defaulting to auto speed.\n");
++        pSpeed = "auto";
++    }
++    else if(link_speed == 10)
++    {
++        g_cfg_start_link_params &= ~(_CPMDIO_100);
++        pSpeed = "10 Mbps";
++    }
++    else
++    {
++	g_cfg_start_link_params &= ~(_CPMDIO_10);
++        pSpeed = "100 Mbps";
++    }
++
++    if(!link_mode || (!strcmp(link_mode, "fd") && !strcmp(link_mode, "hd")))
++    {
++        dbgPrint("Invalid or No value of link mode specified, defaulting to auto mode.\n");
++    }
++    else if(!strcmp(link_mode, "hd"))
++    {
++        g_cfg_start_link_params &= ~(_CPMDIO_FD);
++    }
++    else
++    {
++        g_cfg_start_link_params &= ~(_CPMDIO_HD);
++    }
++
++    dbgPrint("Link is manually set to the speed of %s speed and %s mode.\n", 
++              pSpeed, link_mode ? link_mode : "auto");
++
++    return(0);
++}
++
++//------------------------------------------------------------------------------
++// Call back from the HAL.
++//------------------------------------------------------------------------------
++static int cpmac_p_process_status_ind(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
++{
++    struct net_device    *p_dev        = p_cpmac_priv->owner;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
++    int status;
++
++    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "Status", "Get", &status);
++
++    /* We do not reflect the real link status if in loopback.
++     * After all, we want the packets to reach the hardware so
++     * that Send() should work. */
++    if(p_dev->flags & IFF_LOOPBACK)
++    {
++        dbgPrint("Maintaining the link up loopback for %s.\n", p_dev->name);
++	netif_carrier_on(p_dev);
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//        avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
++//#endif
++
++        return(0);
++    }
++
++    if(status & CPMAC_STATUS_ADAPTER_CHECK) /* ???? */
++    {
++        ; /* what to do ? */
++    }    
++    else if(status)
++    {
++        if(!netif_carrier_ok(p_dev))
++	{
++            netif_carrier_on(p_cpmac_priv->owner);
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//            avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
++//#endif
++	    dbgPrint("Found the Link for the CPMAC instance %s.\n", p_dev->name);
++        }
++
++        if(netif_running(p_dev) & netif_queue_stopped(p_dev))
++        {
++            netif_wake_queue(p_dev);
++        }
++
++	p_cpmac_priv->link_speed = status & CPMAC_STATUS_LINK_SPEED ? 100000000:10000000;
++	p_cpmac_priv->link_mode  = status & CPMAC_STATUS_LINK_DUPLEX? 3:2;
++
++    }
++    else
++    {
++        if(netif_carrier_ok(p_dev))
++	{
++	    /* do we need to register synchronization issues with stats here. */
++	    p_cpmac_priv->link_speed        = 100000000;
++	    p_cpmac_priv->link_mode         = 1;
++
++	    netif_carrier_off(p_dev);
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//            avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
++//#endif
++
++	    dbgPrint("Lost the Link for the CPMAC for %s.\n", p_dev->name);
++	}
++
++        if(!netif_queue_stopped(p_dev))
++        {
++            netif_stop_queue(p_dev);     /* So that kernel does not keep on xmiting pkts. */
++        }
++    }
++
++    return(0);
++}
++
++//-----------------------------------------------------------------------------
++// Timer related private functions.
++//-----------------------------------------------------------------------------
++static int cpmac_p_timer_init(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
++{
++    struct timer_list *p_timer = p_cpmac_priv->timer;
++
++    init_timer(p_timer);
++    
++    p_timer                    = p_cpmac_priv->timer + TICK_TIMER;
++    p_timer->expires           = 0;
++    p_timer->data              = (unsigned long)p_cpmac_priv;
++    p_timer->function          = cpmac_p_tick_timer_expiry;
++
++    return(0);
++}
++
++#if 0
++static int cpmac_timer_cleanup(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
++{
++    struct timer_list *p_timer;
++
++    p_timer = p_cpmac_priv->timer + TICK_TIMER;
++   
++    /* use spin lock to establish synchronization with the dispatch */
++    if(p_timer->function) del_timer_sync(p_timer);
++    p_timer->function = NULL;
++
++    return (0);
++}
++#endif
++
++static int cpmac_p_start_timer(struct timer_list *p_timer, unsigned int delay_ticks)
++{
++    p_timer->expires        = jiffies + delay_ticks;
++
++    if(p_timer->function)
++    {
++        add_timer(p_timer);
++    }
++
++    return(0);
++} 
++
++static void cpmac_p_tick_timer_expiry(unsigned long p_cb_param)
++{
++    CPMAC_PRIVATE_INFO_T   *p_cpmac_priv = (CPMAC_PRIVATE_INFO_T*) p_cb_param;
++    CPMAC_DRV_HAL_INFO_T   *p_drv_hal    = p_cpmac_priv->drv_hal; 
++    struct timer_list       *p_timer     = p_cpmac_priv->timer + TICK_TIMER;
++
++    if(test_bit(0, &p_cpmac_priv->set_to_close))
++    {
++        return;
++    }
++
++    p_drv_hal->hal_funcs->Tick(p_drv_hal->hal_dev);
++  
++    cpmac_p_start_timer(p_timer, p_cpmac_priv->delay_ticks);
++}
++
++static int cpmac_p_stop_timer(struct timer_list *p_timer)
++{
++    /* Ideally we need to a set flag indicating not to start the timer again
++       before del_timer_sync() is called up. But here we assume that the 
++       caller has set the p_cpmac_priv->set_to_close (ok for now). */
++    del_timer_sync(p_timer);
++    
++    return(0);
++}
++
++//------------------------------------------------------------------------------
++// Device configuration and setup related private functions.
++//------------------------------------------------------------------------------
++static int cpmac_p_probe_and_setup_device(CPMAC_PRIVATE_INFO_T *p_cpmac_priv, 
++		                          unsigned long *p_dev_flags)
++{
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal   = p_cpmac_priv->drv_hal;
++    HAL_FUNCTIONS        *p_hal_funcs = p_drv_hal->hal_funcs;
++    HAL_DEVICE           *p_hal_dev   = p_drv_hal->hal_dev;
++    CPMAC_ABILITY_INFO_T *p_capability= p_cpmac_priv->ability_info;
++    unsigned int         val          = 0;
++    int                  channel      = 0;
++
++    p_cpmac_priv->flags                  = 0;
++
++    p_capability->promiscous             = CFG_PROMISCOUS;
++    p_capability->broadcast              = CFG_BROADCAST;
++    p_capability->multicast              = CFG_MULTICAST;
++    p_capability->all_multi              = CFG_ALL_MULTI;
++    p_capability->jumbo_frames           = CFG_JUMBO_FRAMES;
++    p_capability->short_frames           = CFG_SHORT_FRAMES;
++    p_capability->auto_negotiation       = CFG_AUTO_NEGOTIATION;
++    p_capability->link_speed             = cfg_start_link_speed;
++    p_capability->loop_back              = CFG_LOOP_BACK;
++    p_capability->tx_flow_control        = CFG_TX_FLOW_CNTL;
++    p_capability->rx_flow_control        = CFG_RX_FLOW_CNTL;
++    p_capability->tx_pacing              = CFG_TX_PACING;
++    p_capability->rx_pass_crc            = CFG_RX_PASS_CRC;
++    p_capability->qos_802_1q             = CFG_QOS_802_1Q;
++    p_capability->tx_num_chan            = CFG_TX_NUM_CHAN;
++
++    /* Lets probe the device for the configured capabilities (netdev specific).*/ 
++
++    /* Following are set in the set_multi_list, when indicated by the kernel 
++     * Promiscous and all multi.
++     */
++
++    if(p_capability->broadcast)
++    {
++        channel = 0;
++	val     = 1;
++        if((p_hal_funcs->Control(p_hal_dev, pszRX_BROAD_EN, pszSet, &val) == 0) && 
++           (p_hal_funcs->Control(p_hal_dev, pszRX_BROAD_CH, pszSet, &channel) == 0))
++	    *p_dev_flags |= IFF_BROADCAST;
++	else
++	    p_capability->broadcast = 0; /* no broadcast capabilities */
++    }
++
++    if(p_capability->multicast)
++    {
++        val     = 1;
++	channel = 0;
++	if((p_hal_funcs->Control(p_hal_dev, pszRX_MULT_EN, pszSet, &val) == 0) &&
++	   (p_hal_funcs->Control(p_hal_dev, pszRX_MULT_CH, pszSet, &channel) == 0))
++	    *p_dev_flags |= IFF_MULTICAST;
++	else
++	{
++	    p_capability->multicast = 0; 
++	    p_capability->all_multi = 0; /* no multicast, no all-multi. */
++	}
++    }
++
++    if(p_capability->loop_back)
++    {
++        ;  /* We do not put the device in loopback, if required use ioctl */
++    }
++    
++    /* Lets probe the device for the configured capabilities (Non net device specific).*/
++
++    if(p_capability->jumbo_frames)
++    {
++	val = 0;
++        if(p_hal_funcs->Control(p_hal_dev, pszRX_NO_CHAIN, pszSet, &val) == 0)
++            p_cpmac_priv->flags |= IFF_PRIV_JUMBO_FRAMES;
++	else
++	    p_capability->jumbo_frames = 0;
++    }
++
++    if(p_capability->short_frames)
++    {
++	val = 1;
++        if(p_hal_funcs->Control(p_hal_dev, pszRX_CSF_EN, pszSet, &val) == 0)
++            p_cpmac_priv->flags |= IFF_PRIV_SHORT_FRAMES;
++	else
++	    p_capability->short_frames = 0;
++    }            
++
++    val = g_cfg_start_link_params;
++
++#ifdef CONFIG_AR7_MDIX
++    if( avalanche_is_mdix_on_chip() )
++    {
++        val |= _CPMDIO_AUTOMDIX;
++    }
++#endif 
++
++    if(p_hal_funcs->Control(p_hal_dev,pszMdioConnect,pszSet, &val) !=0)
++    {
++        p_capability->link_speed = 0;
++    }
++    else
++    {
++	if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_HD | _CPMDIO_FD | _CPMDIO_10))
++            p_cpmac_priv->flags |= IFF_PRIV_AUTOSPEED;
++	else if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_HD))
++	    p_cpmac_priv->flags |= IFF_PRIV_LINK100_HD;
++	else if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_FD))
++	    p_cpmac_priv->flags |= IFF_PRIV_LINK100_FD;
++	else if(g_cfg_start_link_params & (_CPMDIO_10 | _CPMDIO_HD))
++	    p_cpmac_priv->flags |= IFF_PRIV_LINK10_HD;
++	else if(g_cfg_start_link_params & (_CPMDIO_10 | _CPMDIO_FD))
++	    p_cpmac_priv->flags |= IFF_PRIV_LINK10_FD;
++	else
++	    ;
++    }
++
++    if(p_capability->tx_flow_control)
++    {
++	val = 1;
++        if(p_hal_funcs->Control(p_hal_dev,pszTX_FLOW_EN, pszSet, &val) ==0)
++            p_cpmac_priv->flags |= IFF_PRIV_TX_FLOW_CNTL;
++	else
++            p_capability->tx_flow_control = 0;
++    }
++
++    if(p_capability->rx_flow_control)
++    {
++	val = 1;
++        if(p_hal_funcs->Control(p_hal_dev, pszRX_FLOW_EN, pszSet, &val) ==0)
++	    p_cpmac_priv->flags |= IFF_PRIV_RX_FLOW_CNTL;
++	else
++            p_capability->rx_flow_control = 0;
++    }
++
++    if(p_capability->tx_pacing)
++    {
++	val = 1;
++        if(p_hal_funcs->Control(p_hal_dev, pszTX_PACE, pszSet, &val) ==0)
++            p_cpmac_priv->flags |= IFF_PRIV_TX_PACING;
++	else
++	    p_capability->tx_pacing = 0;
++    }
++
++    if(p_capability->rx_pass_crc)
++    {
++	val = 1;
++	if(p_hal_funcs->Control(p_hal_dev, pszRX_PASS_CRC, pszSet, &val) == 0)
++	    p_cpmac_priv->flags |= IFF_PRIV_RX_PASS_CRC;
++	else                                  
++            p_capability->rx_pass_crc = 0;
++    }
++
++    if(p_capability->qos_802_1q)
++    {
++	val  = 1;
++        if(p_hal_funcs->Control(p_hal_dev, pszRX_QOS_EN, pszSet, &val) == 0)
++            p_cpmac_priv->flags |= IFF_PRIV_8021Q_EN;
++	else
++	{
++	    p_capability->qos_802_1q = 0;
++	    p_capability->tx_num_chan= 1;
++        }
++    }
++
++    if(p_capability->tx_num_chan > 1)
++    {
++	int cfg_tx_num_chan = p_capability->tx_num_chan;
++        val = 0;
++#ifdef TEST
++	if(p_hal_funcs->Control(p_hal_dev, pszTX_NUM_CH, pszGet, &val) == 0)
++	    cfg_tx_num_chan = cfg_tx_num_chan > val ? val : cfg_tx_num_chan;
++	else 
++	    cfg_tx_num_chan = 1;
++#endif
++	p_capability->tx_num_chan = cfg_tx_num_chan;
++    }
++
++    return(0);
++}
++
++static int cpmac_p_setup_driver_params(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
++{
++   int i=0;
++   int threshold = CFG_TX_NUM_BUF_SERVICE;
++
++   char *tx_threshold_ptr = prom_getenv("threshold");
++   
++    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info = p_cpmac_priv->tx_chan_info;
++    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
++    CPMAC_ABILITY_INFO_T *p_capability   = p_cpmac_priv->ability_info;
++
++    /* Timer stuff */
++    p_cpmac_priv->timer_count      = 1; /* should be < or = the MAX TIMER */
++    p_cpmac_priv->timer_created    = 0;
++    p_cpmac_priv->timer_access_hal = 1;
++
++    for(i=0; i < MAX_TIMER; i++)
++        p_cpmac_priv->timer[i].function = NULL;
++
++    p_cpmac_priv->enable_802_1q  = p_capability->qos_802_1q;  
++
++    /* Tx channel related.*/
++    p_tx_chan_info->cfg_chan     = p_capability->tx_num_chan;
++    p_tx_chan_info->opened_chan  = 0;
++    
++    if(tx_threshold_ptr)
++       threshold = simple_strtol(tx_threshold_ptr, (char **)NULL, 10);
++    
++    if((threshold <= 0) && tx_threshold_ptr) /* If threshold set to 0 then Enable the TX interrupt */
++    {
++       threshold  = CFG_TX_NUM_BUF_SERVICE;
++       p_tx_chan_info->tx_int_disable = 0;
++       
++    }
++    else
++    {
++       p_tx_chan_info->tx_int_disable = CFG_TX_INT_DISABLE;
++    }
++
++    for(i=0; i < MAX_TX_CHAN; i++)
++    {
++       
++
++
++       p_tx_chan_info->chan[i].state         = CHAN_CLOSE; 
++       p_tx_chan_info->chan[i].num_BD        = CFG_TX_NUM_BUF_DESC;  
++       p_tx_chan_info->chan[i].buffer_size   = cpmac_max_frame_size;
++       p_tx_chan_info->chan[i].buffer_offset = CFG_TX_BUF_OFFSET;
++
++
++
++       p_tx_chan_info->chan[i].service_max   = threshold;
++    }
++    
++    if (p_tx_chan_info->tx_int_disable)
++       printk("Cpmac driver Disable TX complete interrupt setting threshold to %d.\n",threshold);
++    else
++       printk("Cpmac driver Enable TX complete interrupt\n");
++
++    
++    /* Assuming just one rx channel for now */
++    p_rx_chan_info->cfg_chan            = 1;
++    p_rx_chan_info->opened_chan         = 0;
++    p_rx_chan_info->chan->state         = CHAN_CLOSE;
++    p_rx_chan_info->chan->num_BD        = CFG_RX_NUM_BUF_DESC;
++    p_rx_chan_info->chan->buffer_size   = cpmac_max_frame_size;
++    p_rx_chan_info->chan->buffer_offset = CFG_RX_BUF_OFFSET;
++    p_rx_chan_info->chan->service_max   = CFG_RX_NUM_BUF_SERVICE;
++
++    /* Set as per RFC 2665 */
++    p_cpmac_priv->link_speed     = 100000000; 
++    p_cpmac_priv->link_mode      = 1;
++
++    p_cpmac_priv->loop_back      = 0;
++
++    return(0);
++}
++
++inline static int cpmac_p_rx_buf_setup(CPMAC_RX_CHAN_INFO_T *p_rx_chan)
++{
++    /* Number of ethernet packets & max pkt length */
++    p_rx_chan->chan->tot_buf_size  = p_rx_chan->chan->buffer_size   + 
++                                     2*(CONTROL_802_1Q_SIZE)        +
++	                             p_rx_chan->chan->buffer_offset +
++                                     ADD_FOR_4BYTE_ALIGN(p_rx_chan->chan->buffer_offset & 0x3);
++
++    p_rx_chan->chan->tot_reserve_bytes = CONTROL_802_1Q_SIZE + 
++                                         p_rx_chan->chan->buffer_offset +
++	                                 L3_ALIGN(p_rx_chan->chan->buffer_offset & 0x3);
++
++    return(0);
++}
++
++//-----------------------------------------------------------------------------
++// Net device related private functions.
++//-----------------------------------------------------------------------------
++
++/***************************************************************
++ *	cpmac_dev_init
++ *
++ *	Returns:
++ *		0 on success, error code otherwise.
++ *	Parms:
++ *		dev	The structure of the device to be
++ *			init'ed.
++ *
++ *	This function completes the initialization of the
++ *	device structure and driver.  It reserves the IO
++ *	addresses and assignes the device's methods.
++ *
++ *	
++ **************************************************************/
++
++static int cpmac_dev_init(struct net_device *p_dev)
++{
++    int retVal = -1;
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
++    int instance_num                   = p_cpmac_priv->instance_num;
++    unsigned long net_flags = 0;
++    char *mac_name          = NULL;
++    char *mac_string        = NULL;
++
++    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info;
++    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal;
++    int i;
++
++    int mem_size =    sizeof(CPMAC_DRV_HAL_INFO_T)
++		    + sizeof(CPMAC_TX_CHAN_INFO_T)
++		    + sizeof(CPMAC_RX_CHAN_INFO_T)
++		    + sizeof(CPMAC_ABILITY_INFO_T)
++                    + sizeof(CPMAC_DEVICE_MIB_T)
++                    + sizeof(CPMAC_DRV_STATS_T);
++
++
++#if defined(CONFIG_MIPS_SEAD2)
++    int prev_reset_val = RESET_REG_PRCR;
++    /* Bring the module out of reset */
++    RESET_REG_PRCR |= temp_reset_value[p_cpmac_priv->instance_num];     
++
++    /* Read the version id of the device to check if the device really exists */
++    if( VERSION(temp_base_address[p_cpmac_priv->instance_num]) == 0)
++    {
++        printk(" CPMAC:Device not found\n");
++	RESET_REG_PRCR = prev_reset_val;
++        return -ENODEV;
++    }
++
++    RESET_REG_PRCR = prev_reset_val;
++#endif
++
++
++    if((p_drv_hal = kmalloc(mem_size,  GFP_KERNEL)) == NULL)
++    {
++        errPrint("Failed to allocate memory; rewinding.\n");
++        return(-1);
++    }
++
++    memset(p_drv_hal, 0, mem_size);
++
++    /* build the cpmac private object */
++    p_cpmac_priv->drv_hal       = p_drv_hal;
++    p_cpmac_priv->tx_chan_info  = p_tx_chan_info
++                                = (CPMAC_TX_CHAN_INFO_T*)((char*)p_drv_hal 
++				  + sizeof(CPMAC_DRV_HAL_INFO_T));
++    p_cpmac_priv->rx_chan_info  = p_rx_chan_info 
++                                = (CPMAC_RX_CHAN_INFO_T*)((char *)p_tx_chan_info 
++				  + sizeof(CPMAC_TX_CHAN_INFO_T));
++    p_cpmac_priv->ability_info  = (CPMAC_ABILITY_INFO_T *)((char *)p_rx_chan_info 
++		                  + sizeof(CPMAC_RX_CHAN_INFO_T));
++    p_cpmac_priv->device_mib    = (CPMAC_DEVICE_MIB_T *)((char *)p_cpmac_priv->ability_info 
++	                          + sizeof(CPMAC_ABILITY_INFO_T));
++    p_cpmac_priv->stats         = (CPMAC_DRV_STATS_T *)((char *)p_cpmac_priv->device_mib   
++		                  + sizeof(CPMAC_DEVICE_MIB_T));
++
++    p_drv_hal->owner            = p_cpmac_priv;
++
++
++    switch(instance_num)
++    {
++
++        case 0:
++            mac_name="maca";
++
++            /* Also setting port information */
++            p_dev->if_port =  AVALANCHE_CPMAC_LOW_PORT_ID;            
++
++            break;
++
++        case 1:
++            mac_name="macb";
++
++            /* Also setting port information */
++            p_dev->if_port =  AVALANCHE_CPMAC_HIGH_PORT_ID;            
++
++            break;
++    }
++
++    if(mac_name)
++        mac_string=prom_getenv(mac_name);
++
++    if(!mac_string)
++    {
++        mac_string="08.00.28.32.06.02";
++        printk("Error getting mac from Boot enviroment for %s\n",p_dev->name);
++        printk("Using default mac address: %s\n",mac_string);
++        if(mac_name)
++        {
++            printk("Use Bootloader command:\n");
++            printk("    setenv %s xx.xx.xx.xx.xx.xx\n","<env_name>");
++            printk("to set mac address\n");
++        }
++    }
++
++    str2eaddr(p_cpmac_priv->mac_addr,mac_string);
++
++    for (i=0; i <= ETH_ALEN; i++)
++    {
++        /* This sets the hardware address */
++	p_dev->dev_addr[i] = p_cpmac_priv->mac_addr[i]; 
++    }
++
++    p_cpmac_priv->set_to_close          = 1;
++    p_cpmac_priv->non_data_irq_expected = 0;
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//    if((p_cpmac_priv->led_handle = avalanche_led_register("cpmac", instance_num)) == NULL)
++//   {
++//        errPrint("Could not allocate handle for CPMAC[%d] LED.\n", instance_num);
++//       goto cpmac_init_mod_error;
++//    }
++//#endif
++
++    if(cpmac_drv_init_module(p_drv_hal, p_dev, instance_num) != 0)
++    {
++        errPrint("Could not initialize the HAL for %s.\n", p_dev->name);
++        goto cpmac_init_mod_error;
++    } 
++
++    /* initialize the CPMAC device */
++    if (cpmac_drv_init(p_drv_hal) == -1)
++    {
++	errPrint("HAL init failed for %s.\n", p_dev->name);
++	goto cpmac_init_device_error;
++    }
++
++    if(cpmac_p_probe_and_setup_device(p_cpmac_priv, &net_flags) == -1)
++    {
++        errPrint("Failed to configure up %s.\n", p_dev->name);
++        goto cpmac_init_device_error;
++    }
++
++    if(cpmac_p_setup_driver_params(p_cpmac_priv) == -1)
++    {
++        errPrint("Failed to set driver parameters for %s.\n", p_dev->name);
++        goto cpmac_init_device_error;
++    }
++
++    cpmac_p_rx_buf_setup(p_rx_chan_info);
++
++    /* initialize the timers for the net device */
++    if(cpmac_p_timer_init(p_cpmac_priv) == -1)
++    {
++        errPrint("Failed to set timer(s) for %s.\n", p_dev->name);
++        goto cpmac_timer_init_error;
++    }
++
++    p_dev->addr_len           = 6;
++
++    p_dev->open               = &cpmac_dev_open;    /*  i.e. Start Device  */
++    p_dev->hard_start_xmit    = &cpmac_dev_tx;
++    p_dev->stop               = &cpmac_dev_close;
++    p_dev->get_stats          = &cpmac_dev_get_net_stats;
++
++    p_dev->set_multicast_list = &cpmac_dev_mcast_set;
++    p_dev->set_mac_address    = cpmac_dev_set_mac_addr;
++    /* Knocking off the default broadcast and multicast flags. Allowing the 
++       device configuration to control the flags. */
++    p_dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
++    p_dev->flags |= net_flags;
++
++    netif_carrier_off(p_dev);
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
++//#endif
++
++    /* Tasklet is initialized at the isr registeration time. */
++    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "CpmacBase", "Get", &p_dev->base_addr);
++    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "CpmacSize", "Get", &p_cpmac_priv->dev_size);
++
++    request_mem_region(p_dev->base_addr, p_cpmac_priv->dev_size, p_dev->name);
++
++    retVal = 0;
++
++    if(g_init_enable_flag)
++        cpmac_p_dev_enable(p_dev);
++
++    return(retVal);
++
++cpmac_timer_init_error:
++cpmac_init_device_error  :
++    cpmac_drv_cleanup(p_drv_hal);
++
++cpmac_init_mod_error:
++    kfree(p_drv_hal);
++
++    return (retVal);
++
++} /* cpmac_dev_init */
++
++
++/***************************************************************
++ *	cpmac_p_dev_enable
++ *
++ *	Returns:
++ *		0 on success, error code otherwise.
++ *	Parms:
++ *		dev	Structure of device to be opened.
++ *
++ *	This routine puts the driver and CPMAC adapter in a
++ *	state where it is ready to send and receive packets.
++ *	
++ *
++ **************************************************************/
++int cpmac_p_dev_enable( struct net_device *p_dev)
++{
++    int ret_val = 0;
++    int channel = 0;
++ 
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal      = p_cpmac_priv->drv_hal;
++    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
++    int max_length                       = p_rx_chan_info->chan->tot_buf_size;
++
++    p_cpmac_priv->set_to_close = 0;
++
++    if((ret_val = cpmac_drv_start(p_drv_hal, p_cpmac_priv->tx_chan_info, 
++				  p_cpmac_priv->rx_chan_info, CHAN_SETUP))==-1)
++    {
++        errPrint("%s error: failed to start the device.\n", p_dev->name);
++        ret_val = -1;
++    }
++    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev,"RX_UNICAST_SET",  
++					  "Set", &channel)!=0)
++    {
++        errPrint("%s error: device chan 0 could not be enabled.\n", p_dev->name);	
++	ret_val = -1;
++    }
++    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, pszRX_MAXLEN, pszSet, &max_length) != 0)
++    {
++        errPrint(" CPMAC registers can't be written \n");
++        ret_val = -1;
++    }
++    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "TxIntDisable", "Set", 
++            &p_cpmac_priv->tx_chan_info->tx_int_disable) != 0)
++    {    
++        errPrint(" CPMAC registers can't be written \n");
++        ret_val = -1;
++    }
++    else
++    {
++        ; // Every thing went OK. 
++    }
++    
++    return(ret_val);
++} /* cpmac_dev_enable */
++
++
++static int cpmac_dev_open(struct net_device *p_dev)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
++    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
++
++    if(!g_init_enable_flag)
++        cpmac_p_dev_enable(p_dev);
++   
++    if(request_irq(p_isr_cb_param->intr, cpmac_hal_isr, SA_INTERRUPT, 
++                   "Cpmac Driver", p_isr_cb_param))
++    {
++        errPrint("Failed to register the irq %d for Cpmac %s.\n",
++                  p_isr_cb_param->intr, p_dev->name); 
++        return (-1);          
++    }
++    
++    netif_start_queue(p_dev);
++
++    MOD_INC_USE_COUNT;
++    p_cpmac_priv->stats->start_tick = jiffies;
++    dbgPrint("Started the network queue for %s.\n", p_dev->name);    
++    return(0);
++}
++
++/***************************************************************
++ *	cpmac_p_dev_disable
++ *  
++ * 	Returns:
++ *		An error code.
++ *	Parms:
++ *		dev	The device structure of the device to
++ *			close.
++ *
++ *	This function shuts down the adapter.  
++ *
++ **************************************************************/
++int cpmac_p_dev_disable(struct net_device *p_dev)
++{
++    int ret_val = 0;
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
++
++    set_bit(0, &p_cpmac_priv->set_to_close);
++    set_bit(0, &p_cpmac_priv->non_data_irq_expected);
++   
++    /* The driver does not re-schedule the tasklet after kill is called. So, this 
++       should take care of the bug in the kernel. */
++    tasklet_kill(&p_cpmac_priv->cpmac_isr.tasklet);
++ 
++    if(cpmac_drv_stop(p_drv_hal, p_cpmac_priv->tx_chan_info,
++		      p_cpmac_priv->rx_chan_info, 
++		      CHAN_TEARDOWN | FREE_BUFFER | BLOCKING | COMPLETE) == -1)
++    {
++        ret_val = -1;
++    }
++    else
++    {
++        /* hope that the HAL closes down the tick timer.*/
++
++        dbgPrint("Device %s Closed.\n", p_dev->name);
++        p_cpmac_priv->stats->start_tick = jiffies;
++
++        p_cpmac_priv->link_speed        = 100000000;
++        p_cpmac_priv->link_mode         = 1;
++        netif_carrier_off(p_dev);
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//        avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
++//#endif
++
++        clear_bit(0, &p_cpmac_priv->non_data_irq_expected);
++
++    }
++    
++    return (ret_val);
++
++} /* cpmac_dev_close */
++
++
++/***************************************************************
++ *	cpmac_dev_close
++ *  
++ * 	Returns:
++ *		An error code.
++ *	Parms:
++ *		dev	The device structure of the device to
++ *			close.
++ *
++ *	This function shuts down the adapter.  
++ *
++ **************************************************************/
++static int cpmac_dev_close(struct net_device *p_dev)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
++    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
++
++    /* inform the upper layers. */
++    netif_stop_queue(p_dev);
++
++    if(!g_init_enable_flag)
++        cpmac_p_dev_disable(p_dev);
++    else
++        free_irq(p_isr_cb_param->intr, p_isr_cb_param);
++
++    MOD_DEC_USE_COUNT;
++
++    return(0);
++}
++
++static void cpmac_dev_mcast_set(struct net_device *p_dev)
++{
++    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T    *p_drv_hal    = p_cpmac_priv->drv_hal;
++    CPMAC_ABILITY_INFO_T    *p_capability = p_cpmac_priv->ability_info;
++    HAL_FUNCTIONS           *p_hal_funcs  = p_drv_hal->hal_funcs;
++    HAL_DEVICE              *p_hal_dev    = p_drv_hal->hal_dev;
++    int                     val           = 1;
++    int                     channel       = 0;
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)    
++//    if(netif_carrier_ok(p_dev))
++//      avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
++//#endif
++
++    if(p_dev->flags & IFF_PROMISC)
++    {
++        if(p_capability->promiscous)
++        {       
++            /* multi mode in the HAL, check this */
++	    val = 0;
++	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
++
++	    val = 1;
++            /* set the promiscous mode in the HAL */
++            p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
++            p_hal_funcs->Control(p_hal_dev, pszRX_PROM_CH, pszSet, &channel);
++
++       	    dbgPrint("%s set in the Promisc mode.\n", p_dev->name);	
++	}
++        else
++        {
++	    errPrint("%s not configured for Promisc mode.\n", p_dev->name);
++        }
++    }
++    else if(p_dev->flags & IFF_ALLMULTI)
++    {
++        if(p_capability->all_multi)
++        {	
++	    val = 0;
++	    /* disable the promiscous mode in the HAL */
++	    p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, "Clear", &val);
++
++	    val = 1;
++            /* set the all multi mode in the HAL */
++	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, pszSet, &val);
++	    p_hal_funcs->Control(p_hal_dev, pszRX_MULT_CH, pszSet, &channel);
++
++            dbgPrint("%s has been set to the ALL_MULTI mode.\n", p_dev->name);
++        }
++        else
++        {
++	    errPrint("%s not configured for ALL MULTI mode.\n", p_dev->name);
++        }
++    }
++    else if(p_dev->mc_count)
++    {
++        if(p_capability->multicast)
++        {
++	    struct dev_mc_list *p_dmi = p_dev->mc_list;
++            int    count;
++
++            val = 0;
++            /* clear all the previous data, we are going to populate new ones.*/
++	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
++	    /* disable the promiscous mode in the HAL */
++	    p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
++
++	    for(count = 0; count < p_dev->mc_count; count++, p_dmi = p_dmi->next)
++	    {
++               p_hal_funcs->Control(p_hal_dev, "RX_MULTI_SINGLE", "Set", p_dmi->dmi_addr); 
++	    }
++
++            dbgPrint("%s configured for %d multicast addresses.\n", p_dev->name, p_dev->mc_count);
++        }
++        else
++        {
++	    errPrint("%s has not been configuted for multicast handling.\n", p_dev->name);
++        }
++    }
++    else
++    {
++       val = 0;
++       /* clear all the previous data, we are going to populate new ones.*/
++       p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
++       /* disable the promiscous mode in the HAL */
++       p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
++       dbgPrint("Dev set to  Unicast mode.\n");
++    }
++}
++
++static int cpmac_dev_set_mac_addr(struct net_device *p_dev,void * addr)
++{
++    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T    *p_drv_hal    = p_cpmac_priv->drv_hal;
++    HAL_FUNCTIONS           *p_hal_funcs  = p_drv_hal->hal_funcs;
++    HAL_DEVICE              *p_hal_dev    = p_drv_hal->hal_dev;
++    struct sockaddr *sa = addr;
++
++   memcpy(p_cpmac_priv->mac_addr,sa->sa_data,p_dev->addr_len);
++   memcpy(p_dev->dev_addr,sa->sa_data,p_dev->addr_len);
++   p_hal_funcs->Control(p_hal_dev, pszMacAddr, pszSet, p_cpmac_priv->mac_addr);   
++
++	return 0;
++
++}
++
++/* VLAN is handled by vlan/vconfig support. Here, we just check for the 
++ * 802.1q configuration of the device and en-queue the packet accordingly.
++ * We do not do any 802.1q processing here.
++ */
++static int cpmac_dev_tx( struct sk_buff *skb, struct net_device *p_dev)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
++    int channel                         = 0;
++    int ret_val                         = 0;
++    FRAGLIST             send_frag_list[1];
++
++#ifdef CPMAC_8021Q_SUPPORT
++    if(skb->len < TCI_END_OFFSET)
++    {
++        /* Whee, frame shorter than 14 bytes !! We need to copy 
++	 * fragments to understand the frame. Too much work. 
++	 * Hmm, dump it. */
++
++        /* Free the buffer */
++	goto cpmac_dev_tx_drop_pkt;
++    }
++
++    /* 802.1p/q stuff */
++    if(IS_802_1Q_FRAME(skb->data + TPID_START_OFFSET)) 
++    {
++        /* IEEE 802.1q, section 8.8 and section 8.11.9 */
++        if(!p_cpmac_priv->enable_802_1q) 
++        {
++           /* free the buffer */
++           goto cpmac_dev_tx_drop_pkt;
++        }		
++
++        channel = GET_802_1P_CHAN(p_cpmac_priv->tx_chan_info->opened_chan,
++              		          skb->data[TCI_START_OFFSET]);
++
++    }
++    /* sending a non 802.1q frame, when configured for 802.1q: dump it.*/
++    else if(p_cpmac_priv->enable_802_1q)
++    {
++         /* free the buffer */
++	 goto cpmac_dev_tx_drop_pkt;
++    }
++    else
++    {
++        ;/* it is the good old non 802.1q */
++    }
++#endif
++
++    send_frag_list->len  = skb->len;
++    send_frag_list->data = skb->data;
++
++#ifdef CPMAC_TEST
++    xdump(skb->data, skb->len, "send");
++#endif
++
++    dma_cache_wback_inv((unsigned long)skb->data, skb->len);    
++
++    if(p_drv_hal->hal_funcs->Send(p_drv_hal->hal_dev, send_frag_list, 1, 
++			          skb->len, skb, channel) != 0)
++    {
++	/* code here to stop the queue, when allowing tx timeout, perhaps next release.*/
++        p_cpmac_priv->net_dev_stats.tx_errors++;  
++#ifndef TI_SLOW_PATH
++       /* Free the skb in case of Send return error */
++        dev_kfree_skb_any(skb);
++        p_cpmac_priv->net_dev_stats.tx_dropped++;
++        return 0;
++#endif
++        goto cpmac_dev_tx_drop_pkt; 
++    }
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_TX_ACTIVITY);
++//#endif
++
++    return(ret_val);
++
++cpmac_dev_tx_drop_pkt:
++
++    p_cpmac_priv->net_dev_stats.tx_dropped++;
++    ret_val = -1;
++    return (ret_val);
++
++} /*cpmac_dev_tx */
++
++
++//------------------------------------------------------------------------------
++// Public functions : Called by outsiders to this file.
++//------------------------------------------------------------------------------
++
++
++void *cpmac_hal_malloc_buffer(unsigned int size, void* mem_base, unsigned int mem_range,
++	                      OS_SETUP *p_os_setup, HAL_RECEIVEINFO *HalReceiveInfo, 
++ 	                      OS_RECEIVEINFO **osReceiveInfo, OS_DEVICE *p_dev)
++{
++    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = (CPMAC_RX_CHAN_INFO_T *)p_os_setup;
++    int                  tot_buf_size    = p_rx_chan_info->chan->tot_buf_size;
++    int             tot_reserve_bytes    = p_rx_chan_info->chan->tot_reserve_bytes;
++    struct sk_buff  *p_skb;
++    void             *ret_ptr;
++
++    /* use TI SKB private pool */
++    p_skb = dev_alloc_skb(tot_buf_size);
++
++    if(p_skb == NULL)
++    {
++        errPrint("Failed to allocate skb for %s.\n", ((struct net_device*)p_dev)->name);
++        return (NULL);
++    }
++
++    p_skb->dev = p_dev;
++    skb_reserve(p_skb, tot_reserve_bytes);
++
++    *osReceiveInfo = p_skb;
++
++    ret_ptr = skb_put(p_skb, p_rx_chan_info->chan->buffer_size);
++
++    return(ret_ptr);
++}
++
++void cpmac_hal_isr(int irq, void *p_param, struct pt_regs *regs)
++{
++    CPMAC_ISR_INFO_T      *p_cb_param    = (CPMAC_ISR_INFO_T*) p_param;
++    CPMAC_DRV_HAL_INFO_T  *p_drv_hal     = p_cb_param->owner;
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_drv_hal->owner;
++    int                   pkts_to_handle = 0;
++
++    if(p_cpmac_priv->non_data_irq_expected)
++    {
++        p_cb_param->hal_isr(p_drv_hal->hal_dev, &pkts_to_handle);
++        p_drv_hal->hal_funcs->PacketProcessEnd(p_drv_hal->hal_dev);
++    }
++    else if(!p_cpmac_priv->set_to_close)
++        tasklet_schedule(&((CPMAC_ISR_INFO_T*) p_param)->tasklet);
++    else
++        ; // back off from doing anything more. We are closing down.
++}
++
++void cpmac_handle_tasklet(unsigned long data)
++{
++    CPMAC_ISR_INFO_T     *p_cb_param   = (CPMAC_ISR_INFO_T*) data;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cb_param->owner;
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_drv_hal->owner;
++    int                  pkts_to_handle;
++
++    p_cb_param->hal_isr(p_drv_hal->hal_dev, &pkts_to_handle);
++
++    if(test_bit(0, &p_cpmac_priv->non_data_irq_expected) || !pkts_to_handle)
++        p_drv_hal->hal_funcs->PacketProcessEnd(p_drv_hal->hal_dev);
++    else if(!test_bit(0, &p_cpmac_priv->set_to_close))
++        tasklet_schedule(&p_cb_param->tasklet);
++    else
++        ; // Back off from processing packets we are closing down.
++}
++
++int cpmac_hal_control(OS_DEVICE *p_dev, const char *key, 
++	              const char *action, void *value)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
++    int ret_val = -1;
++
++    if(key == NULL)
++    {
++        dbgPrint("Encountered NULL key.\n");
++	return (-1);
++    }
++
++    if(cpmac_ci_strcmp(key, "Sleep") == 0 && value != NULL)
++    {
++        unsigned int clocks_per_tick  = cpmac_cpu_freq/HZ;
++	unsigned int requested_clocks = *(unsigned int*)value;
++	unsigned int requested_ticks  = (requested_clocks + clocks_per_tick - 1)/clocks_per_tick;
++        mdelay(requested_ticks); 
++	ret_val = 0;
++    }
++    else if(cpmac_ci_strcmp(key, "StateChange") == 0)
++    {
++        ret_val = cpmac_p_process_status_ind(p_cpmac_priv);
++    }
++    else if(cpmac_ci_strcmp(key, "Tick") == 0 && action != NULL)
++    {
++	if(cpmac_ci_strcmp(action, "Set") == 0 && value != NULL)
++	{
++            if(*(unsigned int*)value == 0)
++            {
++                cpmac_p_stop_timer(p_cpmac_priv->timer + TICK_TIMER);
++                ret_val = 0;
++            }
++            else
++            {
++                unsigned int clocks_per_tick  = cpmac_cpu_freq/HZ;
++	        unsigned int requested_clocks = *(unsigned int*)value;
++	        unsigned int requested_ticks  = (requested_clocks + clocks_per_tick - 1)/clocks_per_tick;
++
++                p_cpmac_priv->delay_ticks =  requested_ticks; /* save it for re-triggering */
++	        ret_val = cpmac_p_start_timer(p_cpmac_priv->timer + TICK_TIMER, 
++		  	                      p_cpmac_priv->delay_ticks);
++            }
++	}
++        else if(cpmac_ci_strcmp(action, "Clear") == 0)
++        {
++            ret_val = cpmac_p_stop_timer(p_cpmac_priv->timer + TICK_TIMER);
++        }
++        else
++            ;
++    }
++    else if(cpmac_ci_strcmp(key, "MacAddr") == 0 && action != NULL)
++    {
++        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
++	{
++            *(char **)value = p_cpmac_priv->mac_addr; 
++	    ret_val = 0;
++	}
++    }
++    else if(cpmac_ci_strcmp(key, "CpuFreq") == 0)
++    {
++       if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
++       {
++           *(unsigned int *)value = cpmac_cpu_freq;
++           dbgPrint("Cpu frequency for cpmacs is %u\n",cpmac_cpu_freq);
++           ret_val = 0;
++       }
++    }
++    else if(cpmac_ci_strcmp(key, "SioFlush") == 0)
++    {
++       ret_val = 0;
++       dbgPrint("\n"); 
++    }
++    else if(cpmac_ci_strcmp(key, "CpmacFrequency") == 0)
++    {
++        /* For Sangam cpmac clock is off the PBUS */
++        /* OS Needs to supply CORRECT frequency */
++        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
++        {
++            *(unsigned int *)value = CONFIG_AR7_SYS * 1000 * 1000;
++            ret_val = 0;
++        }
++    }
++    /* For now, providing back the default values. */
++    else if(cpmac_ci_strcmp(key, "MdioClockFrequency") == 0)
++    {
++        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
++        {
++            *(unsigned int *)value = 2200000;  /*DEFAULT */
++            ret_val = 0;
++        }
++    }
++    /* For now, providing back the default values. */
++    else if(cpmac_ci_strcmp(key, "MdioBusFrequency") == 0)
++    {
++        /* For Sangam MdioBusFreq is off the PBUS */
++        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
++        {
++            *(unsigned int *)value = CONFIG_AR7_SYS * 1000 * 1000;
++            ret_val = 0;
++        }
++    }
++  
++#if 0 
++#if defined(CONFIG_AVALANCHE_AUTO_MDIX) 
++    /* supporting Mdio Mdix switching */
++    else if(cpmac_ci_strcmp(key, hcMdioMdixSwitch) == 0)
++    {
++        /* For Sangam Mdio-switching  action should be always "set"*/
++        if(cpmac_ci_strcmp(action, hcSet) == 0 && value != NULL )
++        {
++           unsigned  int mdix =  *((unsigned int *) value) ;
++
++           if(mdix)
++              avalanche_set_phy_into_mdix_mode();
++
++           else
++              avalanche_set_phy_into_mdi_mode();  
++  
++           ret_val = 0;
++        } 
++
++    }
++#endif
++#endif
++    else if(cpmac_ci_strcmp(key, hcMdioMdixSwitch) == 0)
++    {
++        /* For Sangam Mdio-switching  action should be always "set"*/
++        if(cpmac_ci_strcmp(action, hcSet) == 0 && value != NULL )
++        {
++           unsigned  int mdix =  *((unsigned int *) value) ;
++
++#ifdef CONFIG_AR7_MDIX
++	   avalanche_set_mdix_on_chip(0xa8610000 , mdix ? 1: 0);
++#endif
++  
++           ret_val = 0;
++        } 
++
++    }
++
++    return(ret_val);
++}
++
++
++int cpmac_hal_receive(OS_DEVICE *p_dev, FRAGLIST *fragList, 
++                             unsigned int fragCount,
++                             unsigned int packet_size, 
++                             HAL_RECEIVEINFO *hal_receive_info,
++                             unsigned int mode)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
++    struct sk_buff       *p_skb         = fragList[0].OsInfo;
++    p_skb->len                          = fragList[0].len;    
++
++    /* invalidate the cache. */
++    dma_cache_inv((unsigned long)p_skb->data, fragList[0].len);    
++#ifdef CPMAC_TEST
++    xdump(p_skb->data, p_skb->len, "recv");
++#endif
++#ifdef CPMAC_8021Q_SUPPORT
++    /* 802.1q stuff, just does the basic checking here. */
++    if(!p_cpmac_priv->enable_802_1q      &&
++       p_skb->len > TCI_END_OFFSET       &&
++       IS_802_1Q_FRAME(p_skb->data + TPID_START_OFFSET))
++    {
++         goto cpmac_hal_recv_frame_mismatch;
++    }
++#endif
++    if(fragCount > 1) 	    
++    {	    
++       int     len;
++       struct sk_buff *p_temp_skb;
++       CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
++       int     count;
++       
++       dbgPrint("Recv: It is multifragment for %s.\n", p_dev->name);
++       
++       p_skb = dev_alloc_skb(packet_size + 
++          p_rx_chan_info->chan->tot_reserve_bytes); 
++       if(p_skb == NULL) 
++       {
++          p_cpmac_priv->net_dev_stats.rx_errors++;
++          goto cpmac_hal_recv_alloc_failed;
++       }
++       
++       p_skb->dev = p_dev;
++       skb_reserve(p_skb, p_rx_chan_info->chan->tot_reserve_bytes);
++       
++       for(count = 0; count < fragCount; count++)
++       {
++          p_temp_skb = fragList[count].OsInfo;
++          len        = fragList[count].len;
++          
++          dma_cache_inv((unsigned long)p_temp_skb->data, len);
++          
++          memcpy(skb_put(p_skb, len), p_temp_skb->data, len);
++          dev_kfree_skb_any(p_temp_skb);
++       }
++    }
++    
++
++#if defined(CONFIG_MIPS_AVALANCHE_MARVELL)                                                                                                   
++ /* Fetch the receiving port information from EGRESS TRAILOR Bytes*/         
++     p_dev->if_port = (unsigned char)p_skb->data[packet_size -(EGRESS_TRAILOR_LEN-1)] + AVALANCHE_MARVELL_BASE_PORT_ID;
++    skb_trim(p_skb, packet_size - EGRESS_TRAILOR_LEN);                                                                       
++#else                                                                                                                        
++    /* set length & tail */                                                                                                  
++    skb_trim(p_skb, packet_size);                                                                                            
++#endif 
++ 
++    p_skb->protocol = eth_type_trans(p_skb, p_dev);
++
++    netif_rx(p_skb);
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_RX_ACTIVITY);	
++//#endif
++
++    p_cpmac_priv->net_dev_stats.rx_packets++;
++    p_cpmac_priv->net_dev_stats.rx_bytes += packet_size;
++
++    p_drv_hal->hal_funcs->RxReturn(hal_receive_info,1);
++
++    return(0);
++
++cpmac_hal_recv_alloc_failed:
++
++#ifdef CPMAC_8021Q_SUPPORT
++cpmac_hal_recv_frame_mismatch:
++#endif
++ 
++    fragCount--;
++
++    do
++    {
++        dev_kfree_skb_any(fragList[fragCount].OsInfo);
++    }
++    while(fragCount--);
++
++    p_cpmac_priv->net_dev_stats.rx_dropped++;
++
++    return(-1);
++} /*cpmac_receive*/
++
++
++void cpmac_hal_tear_down_complete(OS_DEVICE*a, int b, int ch)
++{
++    dbgPrint("what to do with this.\n");
++}
++
++
++int  cpmac_hal_send_complete(OS_SENDINFO *p_skb)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_skb->dev->priv;
++
++    p_cpmac_priv->net_dev_stats.tx_packets++;
++    p_cpmac_priv->net_dev_stats.tx_bytes += p_skb->len;
++    
++    dev_kfree_skb_any(p_skb);
++
++    return(0);
++}
++
++
++int cpmac_reset(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
++{
++    // code here to reset the device/hal. Not now.
++
++   netif_wake_queue(p_cpmac_priv->owner);
++   return(0);
++}
++
++#ifdef CPMAC_TEST
++
++#define isprint(a) ((a >=' ')&&(a<= '~'))
++void xdump( u_char*  cp, int  length, char*  prefix )
++{
++    int col, count;
++    u_char prntBuf[120];
++    u_char*  pBuf = prntBuf;
++    count = 0;
++    while(count < length){
++        pBuf += sprintf( pBuf, "%s", prefix );
++        for(col = 0;count + col < length && col < 16; col++){
++            if (col != 0 && (col % 4) == 0)
++                pBuf += sprintf( pBuf, " " );
++            pBuf += sprintf( pBuf, "%02X ", cp[count + col] );
++        }
++        while(col++ < 16){      /* pad end of buffer with blanks */
++            if ((col % 4) == 0)
++                sprintf( pBuf, " " );
++            pBuf += sprintf( pBuf, "   " );
++        }
++        pBuf += sprintf( pBuf, "  " );
++        for(col = 0;count + col < length && col < 16; col++){
++            if (isprint((int)cp[count + col]))
++                pBuf += sprintf( pBuf, "%c", cp[count + col] );
++            else
++                pBuf += sprintf( pBuf, "." );
++                }
++        sprintf( pBuf, "\n" );
++        // SPrint(prntBuf);
++        printk(prntBuf);
++        count += col;
++        pBuf = prntBuf;
++    }
++
++}  /* close xdump(... */
++#endif
++
++
++static int __init cpmac_dev_probe(void)
++{
++    int     retVal         = 0;
++    int     unit;
++    int     instance_count = CONFIG_MIPS_CPMAC_PORTS;
++
++    //cpmac_cpu_freq = avalanche_clkc_get_freq(CLKC_MIPS);
++    cpmac_cpu_freq = CONFIG_AR7_CPU * 1000 * 1000;
++
++    build_psp_config();                       
++
++    for(unit = 0; unit < instance_count; unit++)
++    {
++        struct net_device	        *p_dev;
++        CPMAC_PRIVATE_INFO_T            *p_cpmac_priv;
++        size_t		                dev_size;
++	int                             failed;
++
++        dev_size =    sizeof(struct net_device) 
++	            + sizeof(CPMAC_PRIVATE_INFO_T);
++
++
++        if((p_dev = (struct net_device *) kmalloc(dev_size, GFP_KERNEL)) == NULL)
++        {
++            dbgPrint( "Could not allocate memory for device.\n" );
++            retVal = -ENOMEM;
++            break;
++        }            
++               
++        memset(p_dev, 0, dev_size );
++
++        p_dev->priv                 = p_cpmac_priv
++                                    = (CPMAC_PRIVATE_INFO_T*)(((char *) p_dev) + sizeof(struct net_device));
++        p_cpmac_priv->owner         = p_dev;
++	
++        ether_setup(p_dev); 
++
++	p_cpmac_priv->instance_num  = unit;
++        p_dev->init                 = cpmac_dev_init;
++
++        g_dev_array[p_cpmac_priv->instance_num] = p_dev;
++        
++#if defined CONFIG_MIPS_CPMAC_INIT_BUF_MALLOC
++        g_init_enable_flag = 1;
++        printk("Cpmac driver is allocating buffer memory at init time.\n");
++#endif
++
++	/* This section gives a default value by the number of PHY in order to
++	 * replace the default MACRO. */
++	{
++	    char *mac_port = prom_getenv("MAC_PORT"); /* Internal: 0, External: 1 */
++	    if(!mac_port || (0 != strcmp(mac_port, "0"))) {
++		printk("Using the MAC with external PHY\n");
++		cfg_start_link_speed = _CPMDIO_NOPHY;
++		cpmac_max_frame_size = CPMAC_MAX_FRAME_SIZE + 4;
++	    }
++	    else {
++		printk("Using the MAC with internal PHY\n");
++		cfg_start_link_speed = CFG_START_LINK_SPEED;
++		cpmac_max_frame_size = CPMAC_MAX_FRAME_SIZE;
++	    }
++	    g_cfg_start_link_params = cfg_start_link_speed;
++	}
++
++        cpmac_p_detect_manual_cfg(cfg_link_speed, cfg_link_mode, cpmac_debug_mode);
++
++    	failed = register_netdev(p_dev);
++        if (failed)
++        {
++            dbgPrint("Could not register device for inst %d because of reason \
++                      code %d.\n", unit, failed);
++            retVal = -1;
++            kfree(p_dev);
++            break;
++        }           
++        else
++        {
++
++            char proc_name[100];
++            int  proc_category_name_len = 0;
++
++	    p_cpmac_priv->next_device = last_cpmac_device;
++            last_cpmac_device         = p_dev;
++
++    	    dbgPrint(" %s irq=%2d io=%04x\n",p_dev->name, (int) p_dev->irq,
++    	    	       (int) p_dev->base_addr);
++
++	    strcpy(proc_name, "avalanche/");
++            strcat(proc_name, p_dev->name);
++            proc_category_name_len = strlen(proc_name);
++
++            strcpy(proc_name + proc_category_name_len, "_rfc2665_stats");
++            create_proc_read_entry(proc_name,0,NULL,cpmac_p_read_rfc2665_stats, p_dev);
++
++    	}
++    }
++
++    if(retVal == 0)
++    {
++	/* To maintain backward compatibility with NSP. */
++        gp_stats_file = create_proc_entry("avalanche/cpmac_stats", 0644, NULL);
++        if(gp_stats_file)
++        {
++            gp_stats_file->read_proc  = cpmac_p_read_stats;
++            gp_stats_file->write_proc = cpmac_p_write_stats;
++        }
++	create_proc_read_entry("avalanche/cpmac_link", 0, NULL, cpmac_p_read_link, NULL);
++	create_proc_read_entry("avalanche/cpmac_ver", 0, NULL, cpmac_p_get_version, NULL);
++
++    }
++   
++    cpmac_devices_installed  = unit;
++    dbgPrint("Installed %d cpmac instances.\n", unit);
++    return ( (unit >= 0 ) ? 0 : -ENODEV );
++
++} /* init_module */
++
++
++/***************************************************************
++ *	cleanup_module
++ *
++ *	Returns:
++ *		Nothing
++ *	Parms:
++ *		None
++ *
++ *	Goes through the CpmacDevices list and frees the device
++ *	structs and memory associated with each device (lists
++ *	and buffers).  It also ureserves the IO port regions
++ *	associated with this device.
++ *
++ **************************************************************/
++
++void cpmac_exit(void)
++{
++    struct net_device       *p_dev;
++    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv;
++
++    while (cpmac_devices_installed) 
++    {
++        char proc_name[100];
++        int  proc_category_name_len = 0;
++
++        p_dev = last_cpmac_device;
++        p_cpmac_priv = (CPMAC_PRIVATE_INFO_T *) p_dev->priv;
++
++    	dbgPrint("Unloading %s irq=%2d io=%04x\n",p_dev->name, (int) p_dev->irq, (int) p_dev->base_addr);
++
++        if(g_init_enable_flag)
++            cpmac_p_dev_disable(p_dev);
++      
++        cpmac_drv_cleanup(p_cpmac_priv->drv_hal);
++
++//#if defined (CONFIG_MIPS_AVALANCHE_LED)
++//        avalanche_led_unregister(p_cpmac_priv->led_handle);
++//#endif
++	strcpy(proc_name, "avalanche/");
++        strcat(proc_name, p_dev->name);
++        proc_category_name_len = strlen(proc_name);
++
++        strcpy(proc_name + proc_category_name_len, "_rfc2665_stats");
++        remove_proc_entry(proc_name, NULL);
++        
++        release_mem_region(p_dev->base_addr, p_cpmac_priv->dev_size);
++        unregister_netdev(p_dev);
++	last_cpmac_device = p_cpmac_priv->next_device;
++
++        kfree(p_cpmac_priv->drv_hal);
++        kfree(p_dev);
++     
++	cpmac_devices_installed--;
++    }
++
++    if(gp_stats_file)
++        remove_proc_entry("avalanche/cpmac_stats", NULL);
++
++    remove_proc_entry("avalanche/cpmac_link",  NULL);
++    remove_proc_entry("avalanche/cpmac_ver",   NULL);
++
++    psp_config_cleanup();
++}
++
++     
++module_init(cpmac_dev_probe);
++module_exit(cpmac_exit);
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpmac.h
+--- linux.old/drivers/net/avalanche_cpmac/cpmac.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpmac.h	2005-07-12 02:48:42.043594000 +0200
+@@ -0,0 +1,379 @@
++/******************************************************************************
++ * FILE PURPOSE:    CPMAC Linux Network Device Driver Header
++ ******************************************************************************
++ * FILE NAME:       cpmac.h
++ *
++ * DESCRIPTION:     CPMAC Network Device Driver Header
++ *
++ * REVISION HISTORY:
++ * Date            Name                   Details
++ *----------------------------------------------------------------------------- 
++ * 27 Nov 2002     Suraj S Iyer           Initial Create.
++ * 09 Jun 2003     Suraj S Iyer           Preparing for GA.
++ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifndef CPMAC_H
++#define CPMAC_H
++
++#include <linux/timer.h>
++#include <linux/netdevice.h>
++#include <asm/semaphore.h>
++#include <linux/ctype.h>
++#include <linux/interrupt.h>
++
++#include "cpmacHalLx.h"
++/*-----------------------------------------------------------------------------
++ * Config macros. Use these to config the driver.
++ *---------------------------------------------------------------------------*/
++#define CPMAC_MAX_FRAME_SIZE         1518
++
++#if defined(CONFIG_AR7WRD) || defined(CONFIG_AR7WI) || defined(CONFIG_AR7VWI)|| defined(CONFIG_AR7VW) 
++#define CFG_RX_NUM_BUF_DESC            64 
++#define CFG_RX_NUM_BUF_SERVICE         32 
++#else                                     
++#define CFG_RX_NUM_BUF_DESC            16 
++#define CFG_RX_NUM_BUF_SERVICE         8  
++#endif                                    
++
++#define CFG_RX_BUF_OFFSET              0
++
++#define CFG_TX_NUM_BUF_DESC            128
++#define CFG_TX_NUM_BUF_SERVICE         20 
++#define CFG_TX_BUF_OFFSET              0  /* Lets not change this. */
++#define CFG_TX_TIMEOUT                 2000 /* ticks*/
++#define CFG_TX_INT_DISABLE             1  /* Disable the Tx Complete interrupt */
++
++#define CFG_JUMBO_FRAMES               1
++#define CFG_SHORT_FRAMES               1
++#define CFG_PROMISCOUS                 1
++#define CFG_BROADCAST                  1
++#define CFG_MULTICAST                  1
++#define CFG_ALL_MULTI                  (1*(CFG_MULTICAST))
++#define CFG_AUTO_NEGOTIATION           1
++
++#if defined (CONFIG_MIPS_AVALANCHE_MARVELL)
++#define EGRESS_TRAILOR_LEN             4 
++#define CFG_START_LINK_SPEED           (_CPMDIO_NOPHY)
++#undef  CPMAC_MAX_FRAME_SIZE
++#define CPMAC_MAX_FRAME_SIZE          (1518 + EGRESS_TRAILOR_LEN)
++#else
++#define CFG_START_LINK_SPEED          (_CPMDIO_10 | _CPMDIO_100 | _CPMDIO_HD | _CPMDIO_FD) /* auto nego */
++#endif
++
++#define CFG_LOOP_BACK                  1
++#define CFG_TX_FLOW_CNTL               0
++#define CFG_RX_FLOW_CNTL               0
++#define CFG_TX_PACING                  0
++#define CFG_RX_PASS_CRC                0
++#define CFG_QOS_802_1Q                 0
++#define CFG_TX_NUM_CHAN                1
++
++
++/*-----------------------------------------------------------------------------
++ * Private macros.
++ *---------------------------------------------------------------------------*/
++#define MAX_TIMER               2
++#define TX_TIMER                0
++#define TICK_TIMER              0
++#define MAX_TX_CHAN             8
++
++#define CPMAC_LINK_OFF          0
++#define CPMAC_LINK_ON           1
++/*#define CPMAC_SPEED_100         2
++#define CPMAC_SPEED_10          3
++#define CPMAC_FULL_DPLX         4
++#define CPMAC_HALF_DPLX         5*/
++#define CPMAC_RX_ACTIVITY       2
++#define CPMAC_TX_ACTIVITY       3
++
++struct cpmac_timer_info;
++
++typedef int  (*CPMAC_HAL_ISR_FUNC_T)(HAL_DEVICE*, int*);
++typedef int  (*CPMAC_TIMEOUT_CB_T)(struct cpmac_timer_info*);
++
++typedef struct cpmac_ability_info
++{
++    int promiscous;
++    int broadcast;
++    int multicast;
++    int all_multi;
++    int loop_back;
++    int jumbo_frames;
++    int short_frames;
++    int auto_negotiation;
++    int tx_flow_control;
++    int rx_flow_control;
++    int tx_pacing;
++    int link_speed;
++    int rx_pass_crc;
++    int qos_802_1q;
++    int tx_num_chan;
++}
++CPMAC_ABILITY_INFO_T;
++
++#ifdef DEBUG
++typedef struct cpmac_timer_info
++{
++    void               *owner;
++    UINT32             delay_ticks;
++    WDOG_ID            timer_id;
++    UINT32             is_running;
++    UINT32             timer_set_at;
++    CPMAC_TIMEOUT_CB_T timeout_CB;
++} CPMAC_TIMER_INFO_T;
++
++typedef struct
++{
++    void               *owner;
++    unsigned int       num_cl_desc;
++    CL_DESC            *cl_desc_tbl;
++    M_CL_CONFIG        *m_cl_blk_config;
++    NET_POOL           *net_pool;
++    CL_POOL_ID         clPoolId;
++
++} CPMAC_NET_MEM_INFO_T;
++
++#endif
++
++typedef struct
++{
++    void                  *owner;
++    CPMAC_HAL_ISR_FUNC_T  hal_isr;
++    struct tasklet_struct tasklet;
++    int                   intr;
++
++} CPMAC_ISR_INFO_T;
++
++typedef struct cpmac_chan
++{
++   int num_BD;
++   int buffer_size;
++   int buffer_offset;
++   int service_max;
++   int state;
++   int tot_buf_size;
++   int tot_reserve_bytes;
++
++} CPMAC_CHAN_T;
++
++#define CHAN_CLOSE  0
++#define CHAN_OPENED 1
++
++typedef struct 
++{
++    int          cfg_chan;
++    int          dev_chan;
++    int          opened_chan;
++    CPMAC_CHAN_T chan[1];
++    int          enable_802_1q;
++
++} CPMAC_RX_CHAN_INFO_T;
++
++typedef struct
++{
++    int          cfg_chan;
++    int          dev_chan;
++    int          opened_chan;
++    int          tx_int_disable;
++    CPMAC_CHAN_T chan[MAX_TX_CHAN];
++   
++} CPMAC_TX_CHAN_INFO_T;
++
++
++
++typedef struct
++{
++   void                        *owner;
++   HAL_FUNCTIONS               *hal_funcs;
++   HAL_DEVICE                  *hal_dev;
++   OS_FUNCTIONS                *os_funcs; 
++//   SEM_ID                      chan_teardown_sem;
++   int                         non_data_irq_expected;
++} CPMAC_DRV_HAL_INFO_T;
++
++
++typedef struct
++{
++    unsigned long tx_discards;
++    unsigned long rx_discards;
++    unsigned long start_tick;
++
++} CPMAC_DRV_STATS_T;
++
++typedef struct 
++{
++    unsigned long   ifInGoodFrames;
++    unsigned long   ifInBroadcasts;
++    unsigned long   ifInMulticasts;
++    unsigned long   ifInPauseFrames;
++    unsigned long   ifInCRCErrors;
++    unsigned long   ifInAlignCodeErrors;
++    unsigned long   ifInOversizedFrames;
++    unsigned long   ifInJabberFrames;
++    unsigned long   ifInUndersizedFrames;
++    unsigned long   ifInFragments;
++    unsigned long   ifInFilteredFrames;
++    unsigned long   ifInQosFilteredFrames;
++    unsigned long   ifInOctets;
++    unsigned long   ifOutGoodFrames;
++    unsigned long   ifOutBroadcasts;
++    unsigned long   ifOutMulticasts;
++    unsigned long   ifOutPauseFrames;
++    unsigned long   ifDeferredTransmissions;
++    unsigned long   ifCollisionFrames;
++    unsigned long   ifSingleCollisionFrames;
++    unsigned long   ifMultipleCollisionFrames;
++    unsigned long   ifExcessiveCollisionFrames;
++    unsigned long   ifLateCollisions;
++    unsigned long   ifOutUnderrun;
++    unsigned long   ifCarrierSenseErrors;
++    unsigned long   ifOutOctets;
++    unsigned long   if64OctetFrames;
++    unsigned long   if65To127OctetFrames;
++    unsigned long   if128To255OctetFrames;
++    unsigned long   if256To511OctetFrames;
++    unsigned long   if512To1023OctetFrames;
++    unsigned long   if1024ToUPOctetFrames;
++    unsigned long   ifNetOctets;
++    unsigned long   ifRxSofOverruns;
++    unsigned long   ifRxMofOverruns;
++    unsigned long   ifRxDMAOverruns;
++
++} CPMAC_DEVICE_MIB_T;
++
++
++typedef struct
++{
++    void                         *owner;
++    int                          timer_count;
++    int                          timer_created;
++    struct timer_list            timer[1];
++    CPMAC_DRV_HAL_INFO_T         *drv_hal;
++    unsigned int                 num_of_intr;
++    CPMAC_ISR_INFO_T             cpmac_isr;
++    unsigned int                 link_speed;
++    unsigned int                 link_mode;
++    unsigned int                 enable_802_1q;
++    unsigned int                 timer_access_hal;
++    unsigned int                 loop_back;
++    CPMAC_RX_CHAN_INFO_T         *rx_chan_info;
++    CPMAC_TX_CHAN_INFO_T         *tx_chan_info;
++    CPMAC_ABILITY_INFO_T         *ability_info;
++    CPMAC_DEVICE_MIB_T           *device_mib;
++    CPMAC_DRV_STATS_T            *stats;
++    unsigned int                 flags;
++    unsigned int                 delay_ticks;
++    char                         mac_addr[6];
++    struct net_device_stats      net_dev_stats; 
++//    rwlock_t                     rw_lock;
++    int                          set_to_close;
++    struct net_device            *next_device;
++    unsigned int                 instance_num;
++    unsigned int                 non_data_irq_expected;
++    unsigned long                dev_size;
++    void*                        led_handle;
++} CPMAC_PRIVATE_INFO_T;
++
++
++/* Private flags */
++
++/* bit 0 to 31, bit 32 is used to indicate set or reset */
++
++#define IFF_PRIV_SHORT_FRAMES   0x00010000
++#define IFF_PRIV_JUMBO_FRAMES   0x00020000
++#define IFF_PRIV_AUTOSPEED      0x00080000
++#define IFF_PRIV_LINK10_HD      0x00100000
++#define IFF_PRIV_LINK10_FD      0x00200000
++#define IFF_PRIV_LINK100_HD     0x00400000
++#define IFF_PRIV_LINK100_FD     0x00800000
++#define IFF_PRIV_8021Q_EN       0x01000000
++#define IFF_PRIV_NUM_TX_CHAN    0x02000000
++#define IFF_PRIV_TX_FLOW_CNTL   0x04000000
++#define IFF_PRIV_RX_FLOW_CNTL   0x08000000
++#define IFF_PRIV_TX_PACING      0x10000000
++#define IFF_PRIV_RX_PASS_CRC    0x20000000
++
++#define PRIVCSFLAGS             0x200
++#define PRIVCGFLAGS             0x201
++
++
++#define BLOCKING      1
++#define CHAN_TEARDOWN 2
++#define CHAN_SETUP    4
++#define COMPLETE      8
++#define FREE_BUFFER   16
++
++
++static const char pszStats0[]            = "Stats0";
++static const char pszStats1[]            = "Stats1";
++static const char pszStats2[]            = "Stats2";
++static const char pszStats3[]            = "Stats3";
++static const char pszStats4[]            = "Stats4";
++static const char pszStatsDump[]         = "StatsDump";
++static const char pszStatsClear[]        = "StatsClear";
++static const char pszRX_PASS_CRC[]       = "RX_PASS_CRC";
++static const char pszRX_QOS_EN[]         = "RX_QOS_EN";
++static const char pszRX_NO_CHAIN[]       = "RX_NO_CHAIN";
++static const char pszRX_CMF_EN[]         = "RX_CMF_EN";
++static const char pszRX_CSF_EN[]         = "RX_CSF_EN";
++static const char pszRX_CEF_EN[]         = "RX_CEF_EN";
++static const char pszRX_CAF_EN[]         = "RX_CAF_EN";
++static const char pszRX_PROM_CH[]        = "RX_PROM_CH";
++static const char pszRX_BROAD_EN[]       = "RX_BROAD_EN";
++static const char pszRX_BROAD_CH[]       = "RX_BROAD_CH";
++static const char pszRX_MULT_EN[]        = "RX_MULT_EN";
++static const char pszRX_MULT_CH[]        = "RX_MULT_CH";
++static const char pszTX_PTYPE[]          = "TX_PTYPE";
++static const char pszTX_PACE[]           = "TX_PACE";
++static const char pszMII_EN[]            = "MII_EN";
++static const char pszTX_FLOW_EN[]        = "TX_FLOW_EN";
++static const char pszRX_FLOW_EN[]        = "RX_FLOW_EN";
++static const char pszRX_MAXLEN[]         = "RX_MAXLEN";
++static const char pszRX_FILTERLOWTHRESH[]   = "RX_FILTERLOWTHRESH";
++static const char pszRX0_FLOWTHRESH[]   = "RX0_FLOWTHRESH";
++static const char pszRX_UNICAST_SET[]    = "RX_UNICAST_SET";
++static const char pszRX_UNICAST_CLEAR[]  = "RX_UNICAST_CLEAR";
++static const char pszMdioConnect[]       = "MdioConnect";
++static const char pszMacAddr[]           = "MacAddr";
++static const char pszTick[]              = "Tick";
++static const char pszRX_MULTICAST[]      = "RX_MULTICAST";
++static const char pszRX_MULTI_ALL[]      = "RX_MULTI_ALL";
++static const char pszRX_MULTI_SINGLE[]   = "RX_MULTI_SINGLE";
++
++static const char pszSet[]               = "Set";
++static const char pszGet[]               = "Get";
++static const char pszClear[]             = "Clear";
++
++
++void *cpmac_hal_malloc_buffer(unsigned int size, void *MemBase, unsigned int MemRange,
++                              HAL_DEVICE *HalDev, HAL_RECEIVEINFO *HalReceiveInfo, 
++                              OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
++
++void cpmac_hal_tear_down_complete(OS_DEVICE*, int, int);
++int  cpmac_hal_control(OS_DEVICE *p_END_obj, const char *key, 
++                   const char *action, void *value);
++int  cpmac_hal_receive(OS_DEVICE *p_END_obj, FRAGLIST *fragList, 
++               unsigned int FragCount, unsigned int pkt_len, 
++               HAL_RECEIVEINFO *halReceiveInfo, 
++               unsigned int mode);
++int  cpmac_hal_send_complete(OS_SENDINFO*);
++
++void  cpmac_hal_isr(int irq, void *p_param, struct pt_regs *p_cb_param);
++void  cpmac_handle_tasklet(unsigned long data);
++
++inline static int cpmac_ci_strcmp(const char *s1, const char *s2)
++{
++    while(*s1 && *s2)
++    {
++        if(tolower(*s1) != tolower(*s2))
++            break;
++        s1++;
++        s2++;
++    }
++
++    return(tolower(*s1) - tolower(*s2));
++}
++
++#endif
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.c linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.c
+--- linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.c	2005-07-12 02:48:42.044593000 +0200
+@@ -0,0 +1,492 @@
++/******************************************************************************
++ * FILE PURPOSE:    CPMAC Net Driver HAL support Source
++ ******************************************************************************
++ * FILE NAME:       cpmacHalLx.c
++ *
++ * DESCRIPTION:     CPMAC Network Device Driver Source
++ *
++ * REVISION HISTORY:
++ *
++ * Date           Description                               Author
++ *-----------------------------------------------------------------------------
++ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
++ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
++ * 18 Dec 2003    Updated for 5.7                           Suraj S Iyer
++ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ *******************************************************************************/
++#include <linux/kernel.h> 
++#include <linux/module.h> 
++#include <linux/init.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/delay.h>     
++#include <linux/spinlock.h>
++#include <linux/proc_fs.h>
++#include <asm/io.h>
++#include <linux/string.h>
++
++#include <asm/ar7/avalanche_intc.h>
++
++#include "cpmacHalLx.h"
++#include "cpmac.h"
++
++/* PSP config headers */
++#include "psp_config_parse.h"
++#include "psp_config_mgr.h"
++
++/* debug */                                 
++extern int cpmac_debug_mode;
++#define dbgPrint if (cpmac_debug_mode) printk
++#define errPrint printk
++
++char CpmacSignature[] = "Cpmac driver";
++static unsigned long irq_flags = 0;
++OS_SETUP *p_os_setup = NULL;
++
++extern int avalanche_request_intr_pacing(int, unsigned int, unsigned int);
++extern int avalanche_free_intr_pacing(unsigned int blk_num);
++
++/*----------------------------------------------------------------------------
++ * Parameter extracting functionalities.
++ *--------------------------------------------------------------------------*/
++static int os_find_parm_u_int(void *info_ptr, const char *param, unsigned int *val)
++{
++    int ret_val = 0;
++
++    if((ret_val = psp_config_get_param_uint(info_ptr, param, val)) == -1)
++    {
++        dbgPrint("Error: could not locate the requested \"%s\" param.\n",param);
++        ret_val = -1;
++    }
++
++    return(ret_val);
++}
++
++static int os_find_parm_val(void *info_ptr, const char *param, void *val)
++{
++    int ret_val = 0;
++
++    if(psp_config_get_param_string(info_ptr, param, val) == -1)
++    {
++        dbgPrint("Error: could not locate the requested \"%s\" param.\n",param);
++        ret_val = -1;
++    }
++
++    return(ret_val);
++}
++
++static int os_find_device(int unit, const char *find_name, void *device_info)
++{
++    int ret_val = 0;
++
++    if(psp_config_get((char *)find_name, unit, device_info) == -1)
++    {
++        dbgPrint("Error: could not locate the requested \"%s\" param.\n", find_name);
++        ret_val = -1;
++    }
++
++    return(ret_val);
++}
++
++/*---------------------------------------------------------------------------
++ * Memory related OS abstraction.
++ *--------------------------------------------------------------------------*/
++void os_free(void *mem_ptr)
++{
++    kfree(mem_ptr);
++}
++
++void  os_free_buffer(OS_RECEIVEINFO *osReceiveInfo, void *mem_ptr)
++{
++    dev_kfree_skb_any(osReceiveInfo);
++}
++
++void  os_free_dev(void *mem_ptr)
++{
++    kfree(mem_ptr);
++}
++
++void os_free_dma_xfer(void *mem_ptr)
++{
++    kfree(mem_ptr);
++}
++
++static void *os_malloc(unsigned int size)
++{
++    return(kmalloc(size, GFP_KERNEL));
++}
++
++static void *os_malloc_dma_xfer(unsigned int size, 
++                                void         *mem_base, 
++                                unsigned int mem_range)
++{
++    return(kmalloc(size, GFP_KERNEL));
++}
++
++static void *os_malloc_dev(unsigned int size)
++{
++    return(kmalloc(size, GFP_KERNEL));
++}
++
++
++/*----------------------------------------------------------------------------
++ * CRITICAL SECTION ENABLING/DISABLING.
++ *--------------------------------------------------------------------------*/
++static void os_critical_on(void)
++{
++    save_and_cli(irq_flags);
++}
++
++static void os_critical_off(void)
++{
++    restore_flags(irq_flags);
++}
++
++/*----------------------------------------------------------------------------
++ * Cache related abstraction
++ *--------------------------------------------------------------------------*/
++static void os_cache_invalidate(void *mem_ptr, int size)
++{
++    dma_cache_inv((unsigned long)mem_ptr, size);
++}
++
++static void os_cache_writeback(void *mem_ptr, int size)
++{
++    dma_cache_wback_inv((unsigned long)mem_ptr, size);
++}
++
++/*-----------------------------------------------------------------------------
++ * Support functions.
++ *---------------------------------------------------------------------------*/
++
++static void  hal_drv_unregister_isr(OS_DEVICE *p_dev, int intr)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
++    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
++    intr                                 = LNXINTNUM(intr);
++
++    free_irq(p_isr_cb_param->intr, p_isr_cb_param);
++
++    dbgPrint("cpmac_hal_unregister called for the intr %d for unit %x and isr_cb_param %x.\n", 
++             intr, p_cpmac_priv->instance_num, (unsigned int )&p_cpmac_priv->cpmac_isr);
++}
++
++
++static void hal_drv_register_isr(OS_DEVICE *p_dev, 
++                                 CPMAC_HAL_ISR_FUNC_T hal_isr, int intr)
++{
++    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
++    CPMAC_DRV_HAL_INFO_T *p_drv_hal      = p_cpmac_priv->drv_hal;
++    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
++    intr                                 = LNXINTNUM(intr);
++       
++    dbgPrint("osRegister called for the intr %d for device %x and p_isr_cb_param %x.\n", 
++             intr, (bit32u)p_dev, (bit32u)p_isr_cb_param);
++
++    p_isr_cb_param->owner       = p_drv_hal;
++    p_isr_cb_param->hal_isr     = hal_isr;
++    p_isr_cb_param->intr        = intr;
++
++    tasklet_init(&p_isr_cb_param->tasklet, cpmac_handle_tasklet, (unsigned long)p_isr_cb_param);
++    dbgPrint("Success in registering irq %d for Cpmac unit# %d.\n", intr, p_cpmac_priv->instance_num); 
++}
++
++/*---------------------------------------------------------------------------
++ * FUNCTIONS called by the CPMAC Net Device.
++ *-------------------------------------------------------------------------*/
++static int load_os_funcs(OS_FUNCTIONS *os_func)
++{
++    dbgPrint("os_init_module: Start\n"); 
++    if( os_func == 0 )
++    {
++        return(sizeof(OS_FUNCTIONS));   
++    }
++
++    os_func->Control                    = cpmac_hal_control;
++    os_func->CriticalOn                 = os_critical_on;
++    os_func->CriticalOff                = os_critical_off;
++    os_func->DataCacheHitInvalidate     = os_cache_invalidate;
++    os_func->DataCacheHitWriteback      = os_cache_writeback;       
++    os_func->DeviceFindInfo     = os_find_device;
++    os_func->DeviceFindParmUint = os_find_parm_u_int;
++    os_func->DeviceFindParmValue= os_find_parm_val;
++    os_func->Free               = os_free;
++    os_func->FreeRxBuffer       = os_free_buffer;
++    os_func->FreeDev            = os_free_dev;
++    os_func->FreeDmaXfer        = os_free_dma_xfer;
++    os_func->IsrRegister        = hal_drv_register_isr;
++    os_func->IsrUnRegister      = hal_drv_unregister_isr;
++    os_func->Malloc             = os_malloc;
++    os_func->MallocDev          = os_malloc_dev;
++    os_func->MallocDmaXfer      = os_malloc_dma_xfer;
++    os_func->MallocRxBuffer     = cpmac_hal_malloc_buffer;
++    os_func->Memset             = memset;
++    os_func->Printf             = printk;
++    os_func->Receive            = cpmac_hal_receive;
++    os_func->SendComplete       = cpmac_hal_send_complete;
++    os_func->Strcmpi            = cpmac_ci_strcmp;
++    os_func->TeardownComplete   = cpmac_hal_tear_down_complete;
++    os_func->Strstr             = strstr;
++    os_func->Strtoul            = simple_strtol;
++    os_func->Sprintf            = sprintf;
++    os_func->Strlen             = strlen;
++
++    dbgPrint("os_init_module: Leave\n");             
++  
++    return(0);
++}
++
++
++int cpmac_drv_init(CPMAC_DRV_HAL_INFO_T *p_drv_hal)
++{
++    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
++    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
++
++    return(p_hal_funcs->Init(p_hal_dev));
++}
++
++int cpmac_drv_cleanup(CPMAC_DRV_HAL_INFO_T *p_drv_hal)
++{
++    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
++    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
++
++    int              ret_val       = p_hal_funcs->Shutdown(p_hal_dev);
++
++#if 0
++    if(ret_val == 0)
++        kfree(p_hal_funcs);
++    else
++        ret_val = -1;
++#endif
++
++    kfree(p_drv_hal->os_funcs); 
++    
++    return (ret_val); 
++}
++
++int cpmac_drv_tx_setup(HAL_FUNCTIONS        *p_hal_funcs,
++                       HAL_DEVICE           *p_hal_dev,
++                       CPMAC_TX_CHAN_INFO_T *p_tx_chan_info)
++{
++    int ret_val = 0;
++    int count   = 0;
++    CHANNEL_INFO chan_info;
++
++    /* Let's setup the TX Channels. */
++    for(count=0; count < p_tx_chan_info->cfg_chan; count++)
++    {
++        chan_info.Channel        = count;
++        chan_info.Direction      = DIRECTION_TX;       
++        chan_info.TxNumBuffers   = p_tx_chan_info->chan[count].num_BD;
++        chan_info.TxServiceMax   = p_tx_chan_info->chan[count].service_max;
++        chan_info.TxNumQueues    = 0;
++        
++        if((ret_val = p_hal_funcs->ChannelSetup(p_hal_dev, &chan_info,
++                                                NULL)) != 0)
++        {
++            errPrint("Error in opening channel %d for TX.\n", count);
++            ret_val = -1;
++            break;
++        }
++
++        p_tx_chan_info->opened_chan++;
++    }
++
++    return(ret_val);
++}
++
++int cpmac_drv_rx_setup(HAL_FUNCTIONS         *p_hal_funcs,
++                       HAL_DEVICE            *p_hal_dev,
++                       CPMAC_RX_CHAN_INFO_T  *p_rx_chan_info)
++{
++    int ret_val = 0;
++    CHANNEL_INFO chan_info;
++
++    chan_info.Channel       = 0;
++    chan_info.Direction     = DIRECTION_RX;
++    chan_info.RxBufSize     = p_rx_chan_info->chan[0].buffer_size;
++    chan_info.RxBufferOffset= p_rx_chan_info->chan[0].buffer_offset;
++    chan_info.RxNumBuffers  = p_rx_chan_info->chan[0].num_BD;
++    chan_info.RxServiceMax  = p_rx_chan_info->chan[0].service_max;
++
++    if(p_hal_funcs->ChannelSetup(p_hal_dev, &chan_info, p_rx_chan_info) != 0) 
++    {
++        errPrint("Error in opening channel %d for RX.\n", 0);
++        ret_val = -1;
++    }
++
++    return(ret_val);
++}
++
++int cpmac_drv_start(CPMAC_DRV_HAL_INFO_T *p_drv_hal,
++                    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
++                    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info,
++                    unsigned int         flags)
++{
++    int ret_val = 0;
++    HAL_FUNCTIONS *p_hal_funcs = p_drv_hal->hal_funcs;
++    HAL_DEVICE    *p_hal_dev   = p_drv_hal->hal_dev;
++
++    dbgPrint("It is in cpmac_drv_start for %x.\n", (unsigned int)p_drv_hal);
++
++    if(flags & CHAN_SETUP)
++    {
++        if(cpmac_drv_tx_setup(p_hal_funcs, p_hal_dev, 
++                  p_tx_chan_info)!=0)
++        {
++            errPrint("Failed to set up tx channel(s).\n");
++            ret_val = -1;
++        }
++        else if(cpmac_drv_rx_setup(p_hal_funcs, p_hal_dev,
++                                   p_rx_chan_info)!=0)
++        {
++            errPrint("Failed to set up rx channel.\n");
++            ret_val = -1;
++        }
++        else
++        {
++            ret_val = 0;
++        }
++    }
++
++    /* Error in setting up the Channels, quit. */
++    if((ret_val == 0) && (ret_val = p_hal_funcs->Open(p_hal_dev)) != 0)
++    {
++        errPrint("failed to open the HAL!!!.\n");
++        ret_val = -1;
++    }
++
++    return (ret_val);
++} /* cpmac_drv_start */
++
++
++
++int cpmac_drv_tx_teardown(HAL_FUNCTIONS        *p_hal_funcs,
++                          HAL_DEVICE           *p_hal_dev,
++                          CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
++                          unsigned int         flags)
++{
++    int ret_val = 0;
++    int count   = 0;
++
++    /* Let's setup the TX Channels. */
++    for(;  p_tx_chan_info->opened_chan > 0; 
++        p_tx_chan_info->opened_chan--, count++)
++    {
++        if(p_hal_funcs->ChannelTeardown(p_hal_dev, count, flags) != 0)
++        {
++            errPrint("Error in tearing down channel %d for TX.\n", count);
++            ret_val = -1;
++            break;
++        }
++    }
++
++    return(ret_val);
++}
++
++
++int cpmac_drv_rx_teardown(HAL_FUNCTIONS *p_hal_funcs,
++                  HAL_DEVICE    *p_hal_dev,
++              unsigned int  flags)
++{
++    int ret_val = 0;
++
++    if(p_hal_funcs->ChannelTeardown(p_hal_dev, 0, flags) != 0) 
++    {
++        errPrint("Error in tearing down channel %d for RX.\n", 0);
++        ret_val = -1;
++    }
++
++    return(ret_val);
++}
++
++int cpmac_drv_stop(CPMAC_DRV_HAL_INFO_T    *p_drv_hal,
++                   CPMAC_TX_CHAN_INFO_T    *p_tx_chan_info,
++                   CPMAC_RX_CHAN_INFO_T    *p_rx_chan_info,
++                   unsigned int flags)
++{
++    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
++    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
++    int ret_val                    = 0;
++
++    if(flags & CHAN_TEARDOWN)
++    {
++        unsigned int chan_flags = 0;
++
++        if(flags & FREE_BUFFER) chan_flags |= 0x4; /* full tear down */
++        if(flags & BLOCKING)    chan_flags |= 0x8; /* blocking call  */
++
++        dbgPrint("The teardown flags are %d.\n", flags);
++        dbgPrint("The teardown chan flags are %d.\n", chan_flags);
++
++        if(cpmac_drv_tx_teardown(p_hal_funcs, p_hal_dev, 
++                                 p_tx_chan_info, chan_flags | 0x1) != 0)
++        {
++            ret_val = -1;
++            errPrint("The tx channel teardown failed.\n");
++        }
++        else if(cpmac_drv_rx_teardown(p_hal_funcs, p_hal_dev, chan_flags | 0x2) != 0)
++        {
++            ret_val = -1;
++            errPrint("The rx channel teardown failed.\n");
++        }
++        else
++        {
++            ;
++        }
++    }
++
++    if(ret_val == 0)
++    {
++        int close_flags = 1;
++
++        if(flags & FREE_BUFFER)  close_flags = 2;
++//        if(flags & COMPLETE)     close_flags = 3;
++
++        if(p_hal_funcs->Close(p_hal_dev, close_flags) != 0)
++        {
++            ret_val = -1;
++        }
++    }
++        
++    return(ret_val);
++}
++
++int cpmac_drv_init_module(CPMAC_DRV_HAL_INFO_T *p_drv_hal, OS_DEVICE *p_os_dev, int inst)
++{
++    int ret_val = -1;
++    int hal_func_size;
++
++    dbgPrint("Entering the CpmacInitModule for the inst %d \n", inst);
++
++    if((p_drv_hal->os_funcs = kmalloc(sizeof(OS_FUNCTIONS), GFP_KERNEL)) == NULL)
++    {
++        errPrint("Failed to allocate memory for OS_FUNCTIONS.\n");
++    }
++    else if(load_os_funcs(p_drv_hal->os_funcs) != 0)
++    {
++        errPrint("Failed to load OS funcs.\n");
++        os_free(p_drv_hal->os_funcs);
++    }
++    else if(halCpmacInitModule(&p_drv_hal->hal_dev, p_os_dev,
++                               &p_drv_hal->hal_funcs, p_drv_hal->os_funcs, 
++                               sizeof(*p_drv_hal->os_funcs),
++                               &hal_func_size, inst) != 0)
++    {
++        errPrint("halCpmacInitModule failed for inst %d \n", inst);
++        os_free(p_drv_hal->os_funcs);
++    }
++    else if(p_drv_hal->hal_funcs->Probe(p_drv_hal->hal_dev) != 0)
++    {
++        errPrint("halCpmacProbe failed for inst %d \n", inst);       
++        os_free(p_drv_hal->os_funcs);
++    }
++    else
++    {
++        /* every thing went well. */
++        ret_val = 0;
++    }  
++
++    return (ret_val);  
++}
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.h linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.h
+--- linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.h	2005-07-12 02:48:42.044593000 +0200
+@@ -0,0 +1,51 @@
++/******************************************************************************
++ * FILE PURPOSE:    CPMAC Linux Device Driver HAL support Header
++ ******************************************************************************
++ * FILE NAME:       cpmacHalVx.h
++ *
++ * DESCRIPTION:     CPMAC Linux Device Driver Header
++ *
++ * REVISION HISTORY:
++ *
++ * Date           Description                               Author
++ *-----------------------------------------------------------------------------
++ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
++ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
++ * 
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifndef __CPMAC_HAL_LX_H
++#define __CPMAC_HAL_LX_H
++
++
++typedef struct net_device         OS_DEVICE;
++typedef struct sk_buff            OS_RECEIVEINFO;
++typedef struct sk_buff            OS_SENDINFO;
++
++#ifdef DEBUG
++typedef void                      HAL_RECEIVEINFO;
++typedef void                      HAL_DEVICE;
++typedef void                      OS_SETUP;
++#endif
++
++#define OS_SETUP   void
++#define HAL_DEVICE void
++#define HAL_RECEIVEINFO void
++
++#define _CPHAL_CPMAC
++ 
++#include "cpswhal_cpmac.h"
++#include "cpmac.h"
++
++int cpmac_drv_start(CPMAC_DRV_HAL_INFO_T *, CPMAC_TX_CHAN_INFO_T*,
++                    CPMAC_RX_CHAN_INFO_T *, unsigned int);
++int cpmac_drv_cleanup(CPMAC_DRV_HAL_INFO_T *);
++int cpmac_drv_init(CPMAC_DRV_HAL_INFO_T*);
++int cpmac_drv_close(CPMAC_DRV_HAL_INFO_T*);
++int cpmac_drv_open(CPMAC_DRV_HAL_INFO_T*);
++int cpmac_drv_init_module(CPMAC_DRV_HAL_INFO_T*, OS_DEVICE*, int);
++int cpmac_drv_stop(CPMAC_DRV_HAL_INFO_T *p_drv_hal,CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
++                   CPMAC_RX_CHAN_INFO_T *p_rx_chan_info,unsigned int flags);
++
++#endif
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac_reg.h linux.dev/drivers/net/avalanche_cpmac/cpmac_reg.h
+--- linux.old/drivers/net/avalanche_cpmac/cpmac_reg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpmac_reg.h	2005-07-12 02:48:42.045593000 +0200
+@@ -0,0 +1,406 @@
++/****************************************************************************
++        TNETD73xx Software Support
++        Copyright(c) 2000, Texas Instruments Incorporated. All Rights Reserved.
++
++        FILE: cpmac_reg.h   Register definitions for the CPMAC module
++
++         DESCRIPTION:
++                This include file contains register definitions for the
++                CPMAC module.
++
++         HISTORY:
++              15Nov00 BEGR Original version written
++              30May02 MICK Added bits for Int Vector
++              19Sep02 MICK Added INT_ACK per Channel
++              08Nov02 GDUN Updated to use base
++              12Nov02 MICK Incorporated into CPHAL 
++*****************************************************************************/
++#ifndef _INC_CPMAC_REG
++#define _INC_CPMAC_REG
++
++#ifndef MEM_PTR
++#define MEM_PTR volatile bit32u *
++#endif
++
++/***************************************************************************
++ *                                                                         
++ *         C P M A C  M E M O R Y  M A P 
++ *                                                                         
++ **************************************************************************/
++
++#define pCPMAC_TX_IDVER(base)                 ((MEM_PTR)(base+0x000))
++#define  CPMAC_TX_IDVER(base)                 (*pCPMAC_TX_IDVER(base))
++#define pCPMAC_TX_CONTROL(base)               ((MEM_PTR)(base+0x004))
++#define  CPMAC_TX_CONTROL(base)               (*pCPMAC_TX_CONTROL(base))
++#define pCPMAC_TX_TEARDOWN(base)              ((MEM_PTR)(base+0x008))
++#define  CPMAC_TX_TEARDOWN(base)              (*pCPMAC_TX_TEARDOWN(base))
++#define pCPMAC_RX_IDVER(base)                 ((MEM_PTR)(base+0x010))
++#define  CPMAC_RX_IDVER(base)                 (*pCPMAC_RX_IDVER(base))
++#define pCPMAC_RX_CONTROL(base)               ((MEM_PTR)(base+0x014))
++#define  CPMAC_RX_CONTROL(base)               (*pCPMAC_RX_CONTROL(base))
++#define pCPMAC_RX_TEARDOWN(base)              ((MEM_PTR)(base+0x018))
++#define  CPMAC_RX_TEARDOWN(base)              (*pCPMAC_RX_TEARDOWN(base))
++#define pCPMAC_RX_MBP_ENABLE(base)            ((MEM_PTR)(base+0x100))
++#define  CPMAC_RX_MBP_ENABLE(base)            (*pCPMAC_RX_MBP_ENABLE(base))
++#define pCPMAC_RX_UNICAST_SET(base)           ((MEM_PTR)(base+0x104))
++#define  CPMAC_RX_UNICAST_SET(base)           (*pCPMAC_RX_UNICAST_SET(base))
++#define pCPMAC_RX_UNICAST_CLEAR(base)         ((MEM_PTR)(base+0x108))
++#define  CPMAC_RX_UNICAST_CLEAR(base)         (*pCPMAC_RX_UNICAST_CLEAR(base))
++#define pCPMAC_RX_MAXLEN(base)                ((MEM_PTR)(base+0x10C))
++#define  CPMAC_RX_MAXLEN(base)                (*pCPMAC_RX_MAXLEN(base))
++#define pCPMAC_RX_BUFFER_OFFSET(base)         ((MEM_PTR)(base+0x110))
++#define  CPMAC_RX_BUFFER_OFFSET(base)         (*pCPMAC_RX_BUFFER_OFFSET(base))
++#define pCPMAC_RX_FILTERLOWTHRESH(base)       ((MEM_PTR)(base+0x114))
++#define  CPMAC_RX_FILTERLOWTHRESH(base)       (*pCPMAC_RX_FILTERLOWTHRESH(base))
++#define pCPMAC_RX0_FLOWTHRESH(base)           ((MEM_PTR)(base+0x120))
++#define  CPMAC_RX0_FLOWTHRESH(base)           (*pCPMAC_RX0_FLOWTHRESH(base))
++#define pCPMAC_RX1_FLOWTHRESH(base)           ((MEM_PTR)(base+0x124))
++#define  CPMAC_RX1_FLOWTHRESH(base)           (*pCPMAC_RX1_FLOWTHRESH(base))
++#define pCPMAC_RX2_FLOWTHRESH(base)           ((MEM_PTR)(base+0x128))
++#define  CPMAC_RX2_FLOWTHRESH(base)           (*pCPMAC_RX2_FLOWTHRESH(base))
++#define pCPMAC_RX3_FLOWTHRESH(base)           ((MEM_PTR)(base+0x12C))
++#define  CPMAC_RX3_FLOWTHRESH(base)           (*pCPMAC_RX3_FLOWTHRESH(base))
++#define pCPMAC_RX4_FLOWTHRESH(base)           ((MEM_PTR)(base+0x130))
++#define  CPMAC_RX4_FLOWTHRESH(base)           (*pCPMAC_RX4_FLOWTHRESH(base))
++#define pCPMAC_RX5_FLOWTHRESH(base)           ((MEM_PTR)(base+0x134))
++#define  CPMAC_RX5_FLOWTHRESH(base)           (*pCPMAC_RX5_FLOWTHRESH(base))
++#define pCPMAC_RX6_FLOWTHRESH(base)           ((MEM_PTR)(base+0x138))
++#define  CPMAC_RX6_FLOWTHRESH(base)           (*pCPMAC_RX6_FLOWTHRESH(base))
++#define pCPMAC_RX7_FLOWTHRESH(base)           ((MEM_PTR)(base+0x13C))
++#define  CPMAC_RX7_FLOWTHRESH(base)           (*pCPMAC_RX7_FLOWTHRESH(base))
++#define pCPMAC_RX0_FREEBUFFER(base)           ((MEM_PTR)(base+0x140))
++#define  CPMAC_RX0_FREEBUFFER(base)           (*pCPMAC_RX0_FREEBUFFER(base))
++#define pCPMAC_RX1_FREEBUFFER(base)           ((MEM_PTR)(base+0x144))
++#define  CPMAC_RX1_FREEBUFFER(base)           (*pCPMAC_RX1_FREEBUFFER(base))
++#define pCPMAC_RX2_FREEBUFFER(base)           ((MEM_PTR)(base+0x148))
++#define  CPMAC_RX2_FREEBUFFER(base)           (*pCPMAC_RX2_FREEBUFFER(base))
++#define pCPMAC_RX3_FREEBUFFER(base)           ((MEM_PTR)(base+0x14C))
++#define  CPMAC_RX3_FREEBUFFER(base)           (*pCPMAC_RX3_FREEBUFFER(base))
++#define pCPMAC_RX4_FREEBUFFER(base)           ((MEM_PTR)(base+0x150))
++#define  CPMAC_RX4_FREEBUFFER(base)           (*pCPMAC_RX4_FREEBUFFER(base))
++#define pCPMAC_RX5_FREEBUFFER(base)           ((MEM_PTR)(base+0x154))
++#define  CPMAC_RX5_FREEBUFFER(base)           (*pCPMAC_RX5_FREEBUFFER(base))
++#define pCPMAC_RX6_FREEBUFFER(base)           ((MEM_PTR)(base+0x158))
++#define  CPMAC_RX6_FREEBUFFER(base)           (*pCPMAC_RX6_FREEBUFFER(base))
++#define pCPMAC_RX7_FREEBUFFER(base)           ((MEM_PTR)(base+0x15C))
++#define  CPMAC_RX7_FREEBUFFER(base)           (*pCPMAC_RX7_FREEBUFFER(base))
++#define pCPMAC_MACCONTROL(base)               ((MEM_PTR)(base+0x160))
++#define  CPMAC_MACCONTROL(base)               (*pCPMAC_MACCONTROL(base))
++#define pCPMAC_MACSTATUS(base)                ((MEM_PTR)(base+0x164))
++#define  CPMAC_MACSTATUS(base)                (*pCPMAC_MACSTATUS(base))
++#define pCPMAC_EMCONTROL(base)                ((MEM_PTR)(base+0x168))
++#define  CPMAC_EMCONTROL(base)                (*pCPMAC_EMCONTROL(base))
++#define pCPMAC_TX_INTSTAT_RAW(base)           ((MEM_PTR)(base+0x170))
++#define  CPMAC_TX_INTSTAT_RAW(base)           (*pCPMAC_TX_INTSTAT_RAW(base))
++#define pCPMAC_TX_INTSTAT_MASKED(base)        ((MEM_PTR)(base+0x174))
++#define  CPMAC_TX_INTSTAT_MASKED(base)        (*pCPMAC_TX_INTSTAT_MASKED(base))
++#define pCPMAC_TX_INTMASK_SET(base)           ((MEM_PTR)(base+0x178))
++#define  CPMAC_TX_INTMASK_SET(base)           (*pCPMAC_TX_INTMASK_SET(base))
++#define pCPMAC_TX_INTMASK_CLEAR(base)         ((MEM_PTR)(base+0x17C))
++#define  CPMAC_TX_INTMASK_CLEAR(base)         (*pCPMAC_TX_INTMASK_CLEAR(base))
++#define pCPMAC_MAC_IN_VECTOR(base)            ((MEM_PTR)(base+0x180))
++#define  CPMAC_MAC_IN_VECTOR(base)            (*pCPMAC_MAC_IN_VECTOR(base))
++#define pCPMAC_MAC_EOI_VECTOR(base)           ((MEM_PTR)(base+0x184))
++#define  CPMAC_MAC_EOI_VECTOR(base)           (*pCPMAC_MAC_EOI_VECTOR(base))
++#define pCPMAC_RX_INTSTAT_RAW(base)           ((MEM_PTR)(base+0x190))
++#define  CPMAC_RX_INTSTAT_RAW(base)           (*pCPMAC_RX_INTSTAT_RAW(base))
++#define pCPMAC_RX_INTSTAT_MASKED(base)        ((MEM_PTR)(base+0x194))
++#define  CPMAC_RX_INTSTAT_MASKED(base)        (*pCPMAC_RX_INTSTAT_MASKED(base))
++#define pCPMAC_RX_INTMASK_SET(base)           ((MEM_PTR)(base+0x198))
++#define  CPMAC_RX_INTMASK_SET(base)           (*pCPMAC_RX_INTMASK_SET(base))
++#define pCPMAC_RX_INTMASK_CLEAR(base)         ((MEM_PTR)(base+0x19C))
++#define  CPMAC_RX_INTMASK_CLEAR(base)         (*pCPMAC_RX_INTMASK_CLEAR(base))
++#define pCPMAC_MAC_INTSTAT_RAW(base)          ((MEM_PTR)(base+0x1A0))
++#define  CPMAC_MAC_INTSTAT_RAW(base)          (*pCPMAC_MAC_INTSTAT_RAW(base))
++#define pCPMAC_MAC_INTSTAT_MASKED(base)       ((MEM_PTR)(base+0x1A4))
++#define  CPMAC_MAC_INTSTAT_MASKED(base)       (*pCPMAC_MAC_INTSTAT_MASKED(base))
++#define pCPMAC_MAC_INTMASK_SET(base)          ((MEM_PTR)(base+0x1A8))
++#define  CPMAC_MAC_INTMASK_SET(base)          (*pCPMAC_MAC_INTMASK_SET(base))
++#define pCPMAC_MAC_INTMASK_CLEAR(base)        ((MEM_PTR)(base+0x1AC))
++#define  CPMAC_MAC_INTMASK_CLEAR(base)        (*pCPMAC_MAC_INTMASK_CLEAR(base))
++#define pCPMAC_MACADDRLO_0(base)              ((MEM_PTR)(base+0x1B0))
++#define  CPMAC_MACADDRLO_0(base)              (*pCPMAC_MACADDRLO_0(base))
++#define pCPMAC_MACADDRLO_1(base)              ((MEM_PTR)(base+0x1B4))
++#define  CPMAC_MACADDRLO_1(base)              (*pCPMAC_MACADDRLO_1(base))
++#define pCPMAC_MACADDRLO_2(base)              ((MEM_PTR)(base+0x1B8))
++#define  CPMAC_MACADDRLO_2(base)              (*pCPMAC_MACADDRLO_2(base))
++#define pCPMAC_MACADDRLO_3(base)              ((MEM_PTR)(base+0x1BC))
++#define  CPMAC_MACADDRLO_3(base)              (*pCPMAC_MACADDRLO_3(base))
++#define pCPMAC_MACADDRLO_4(base)              ((MEM_PTR)(base+0x1C0))
++#define  CPMAC_MACADDRLO_4(base)              (*pCPMAC_MACADDRLO_4(base))
++#define pCPMAC_MACADDRLO_5(base)              ((MEM_PTR)(base+0x1C4))
++#define  CPMAC_MACADDRLO_5(base)              (*pCPMAC_MACADDRLO_5(base))
++#define pCPMAC_MACADDRLO_6(base)              ((MEM_PTR)(base+0x1C8))
++#define  CPMAC_MACADDRLO_6(base)              (*pCPMAC_MACADDRLO_6(base))
++#define pCPMAC_MACADDRLO_7(base)              ((MEM_PTR)(base+0x1CC))
++#define  CPMAC_MACADDRLO_7(base)              (*pCPMAC_MACADDRLO_7(base))
++#define pCPMAC_MACADDRMID(base)               ((MEM_PTR)(base+0x1D0))
++#define  CPMAC_MACADDRMID(base)               (*pCPMAC_MACADDRMID(base))
++#define pCPMAC_MACADDRHI(base)                ((MEM_PTR)(base+0x1D4))
++#define  CPMAC_MACADDRHI(base)                (*pCPMAC_MACADDRHI(base))
++#define pCPMAC_MACHASH1(base)                 ((MEM_PTR)(base+0x1D8))
++#define  CPMAC_MACHASH1(base)                 (*pCPMAC_MACHASH1(base))
++#define pCPMAC_MACHASH2(base)                 ((MEM_PTR)(base+0x1DC))
++#define  CPMAC_MACHASH2(base)                 (*pCPMAC_MACHASH2(base))
++#define pCPMAC_BOFFTEST(base)                 ((MEM_PTR)(base+0x1E0))
++#define  CPMAC_BOFFTEST(base)                 (*pCPMAC_BOFFTEST(base))
++#define pCPMAC_PACTEST(base)                  ((MEM_PTR)(base+0x1E4))
++#define  CPMAC_PACTEST(base)                  (*pCPMAC_PACTEST(base))
++#define pCPMAC_RXPAUSE(base)                  ((MEM_PTR)(base+0x1E8))
++#define  CPMAC_RXPAUSE(base)                  (*pCPMAC_RXPAUSE(base))
++#define pCPMAC_TXPAUSE(base)                  ((MEM_PTR)(base+0x1EC))
++#define  CPMAC_TXPAUSE(base)                  (*pCPMAC_TXPAUSE(base))
++/* STATISTICS */
++#define pCPMAC_RXGOODFRAMES(base)             ((MEM_PTR)(base+0x200))
++#define  CPMAC_RXGOODFRAMES(base)             (*pCPMAC_RXGOODFRAMES(base))
++#define pCPMAC_RXBROADCASTFRAMES(base)        ((MEM_PTR)(base+0x204))
++#define  CPMAC_RXBROADCASTFRAMES(base)        (*pCPMAC_RXBROADCASTFRAMES(base))
++#define pCPMAC_RXMULTICASTFRAMES(base)        ((MEM_PTR)(base+0x208))
++#define  CPMAC_RXMULTICASTFRAMES(base)        (*pCPMAC_RXMULTICASTFRAMES(base))
++#define pCPMAC_RXPAUSEFRAMES(base)            ((MEM_PTR)(base+0x20C))
++#define   CPMAC_RXPAUSEFRAMES(base)           (*pCPMAC_RXPAUSEFRAMES(base))
++#define pCPMAC_RXCRCERRORS(base)              ((MEM_PTR)(base+0x210))
++#define   CPMAC_RXCRCERRORS(base)             (*pCPMAC_RXCRCERRORS(base))
++#define pCPMAC_RXALIGNCODEERRORS(base)        ((MEM_PTR)(base+0x214))
++#define   CPMAC_RXALIGNCODEERRORS(base)       (*pCPMAC_RXALIGNCODEERRORS(base))
++#define pCPMAC_RXOVERSIZEDFRAMES(base)        ((MEM_PTR)(base+0x218))
++#define   CPMAC_RXOVERSIZEDFRAMES(base)       (*pCPMAC_RXOVERSIZEDFRAMES(base))
++#define pCPMAC_RXJABBERFRAMES(base)           ((MEM_PTR)(base+0x21C))
++#define  CPMAC_RXJABBERFRAMES(base)           (*pCPMAC_RXJABBERFRAMES(base))
++#define pCPMAC_RXUNDERSIZEDFRAMES(base)       ((MEM_PTR)(base+0x220))
++#define  CPMAC_RXUNDERSIZEDFRAMES(base)       (*pCPMAC_RXUNDERSIZEDFRAMES(base))
++#define pCPMAC_RXFRAGMENTS(base)              ((MEM_PTR)(base+0x224))
++#define  CPMAC_RXFRAGMENTS(base)              (*pCPMAC_RXFRAGMENTS(base))
++#define pCPMAC_RXFILTEREDFRAMES(base)         ((MEM_PTR)(base+0x228))
++#define  CPMAC_RXFILTEREDFRAMES(base)         (*pCPMAC_RXFILTEREDFRAMES(base))
++#define pCPMAC_RXQOSFILTEREDFRAMES(base)      ((MEM_PTR)(base+0x22C))
++#define  CPMAC_RXQOSFILTEREDFRAMES(base)      (*pCPMAC_RXQOSFILTEREDFRAMES(base))
++#define pCPMAC_RXOCTETS(base)                 ((MEM_PTR)(base+0x230))
++#define  CPMAC_RXOCTETS(base)                 (*pCPMAC_RXOCTETS(base))
++#define pCPMAC_TXGOODFRAMES(base)             ((MEM_PTR)(base+0x234))
++#define  CPMAC_TXGOODFRAMES(base)             (*pCPMAC_TXGOODFRAMES(base))
++#define pCPMAC_TXBROADCASTFRAMES(base)        ((MEM_PTR)(base+0x238))
++#define  CPMAC_TXBROADCASTFRAMES(base)        (*pCPMAC_TXBROADCASTFRAMES(base))
++#define pCPMAC_TXMULTICASTFRAMES(base)        ((MEM_PTR)(base+0x23C))
++#define  CPMAC_TXMULTICASTFRAMES(base)        (*pCPMAC_TXMULTICASTFRAMES(base))
++#define pCPMAC_TXPAUSEFRAMES(base)            ((MEM_PTR)(base+0x240))
++#define  CPMAC_TXPAUSEFRAMES(base)            (*pCPMAC_TXPAUSEFRAMES(base))
++#define pCPMAC_TXDEFERREDFRAMES(base)         ((MEM_PTR)(base+0x244))
++#define  CPMAC_TXDEFERREDFRAMES(base)         (*pCPMAC_TXDEFERREDFRAMES(base))
++#define pCPMAC_TXCOLLISIONFRAMES(base)        ((MEM_PTR)(base+0x248))
++#define  CPMAC_TXCOLLISIONFRAMES(base)        (*pCPMAC_TXCOLLISIONFRAMES(base))
++#define pCPMAC_TXSINGLECOLLFRAMES(base)       ((MEM_PTR)(base+0x24C))
++#define  CPMAC_TXSINGLECOLLFRAMES(base)       (*pCPMAC_TXSINGLECOLLFRAMES(base))
++#define pCPMAC_TXMULTCOLLFRAMES(base)         ((MEM_PTR)(base+0x250))
++#define  CPMAC_TXMULTCOLLFRAMES(base)         (*pCPMAC_TXMULTCOLLFRAMES(base))
++#define pCPMAC_TXEXCESSIVECOLLISIONS(base)    ((MEM_PTR)(base+0x254))
++#define  CPMAC_TXEXCESSIVECOLLISIONS(base)    (*pCPMAC_TXEXCESSIVECOLLISIONS(base))
++#define pCPMAC_TXLATECOLLISIONS(base)         ((MEM_PTR)(base+0x258))
++#define  CPMAC_TXLATECOLLISIONS(base)         (*pCPMAC_TXLATECOLLISIONS(base))
++#define pCPMAC_TXUNDERRUN(base)               ((MEM_PTR)(base+0x25C))
++#define  CPMAC_TXUNDERRUN(base)               (*pCPMAC_TXUNDERRUN(base))
++#define pCPMAC_TXCARRIERSENSEERRORS(base)     ((MEM_PTR)(base+0x260))
++#define  CPMAC_TXCARRIERSENSEERRORS(base)     (*pCPMAC_TXCARRIERSENSEERRORS(base))
++#define pCPMAC_TXOCTETS(base)                 ((MEM_PTR)(base+0x264))
++#define  CPMAC_TXOCTETS(base)                 (*pCPMAC_TXOCTETS(base))
++#define pCPMAC_64OCTETFRAMES(base)            ((MEM_PTR)(base+0x268))
++#define  CPMAC_64OCTETFRAMES(base)            (*pCPMAC_64OCTETFRAMES(base))
++#define pCPMAC_65T127OCTETFRAMES(base)        ((MEM_PTR)(base+0x26C))
++#define  CPMAC_65T127OCTETFRAMES(base)        (*pCPMAC_65T127OCTETFRAMES(base))
++#define pCPMAC_128T255OCTETFRAMES(base)       ((MEM_PTR)(base+0x270))
++#define  CPMAC_128T255OCTETFRAMES(base)       (*pCPMAC_128T255OCTETFRAMES(base))
++#define pCPMAC_256T511OCTETFRAMES(base)       ((MEM_PTR)(base+0x274))
++#define  CPMAC_256T511OCTETFRAMES(base)       (*pCPMAC_256T511OCTETFRAMES(base))
++#define pCPMAC_512T1023OCTETFRAMES(base)      ((MEM_PTR)(base+0x278))
++#define  CPMAC_512T1023OCTETFRAMES(base)      (*pCPMAC_512T1023OCTETFRAMES(base))
++#define pCPMAC_1024TUPOCTETFRAMES(base)       ((MEM_PTR)(base+0x27C))
++#define  CPMAC_1024TUPOCTETFRAMES(base)       (*pCPMAC_1024TUPOCTETFRAMES(base))
++#define pCPMAC_NETOCTETS(base)                ((MEM_PTR)(base+0x280))
++#define  CPMAC_NETOCTETS(base)                (*pCPMAC_NETOCTETS(base))
++#define pCPMAC_RXSOFOVERRUNS(base)            ((MEM_PTR)(base+0x284))
++#define  CPMAC_RXSOFOVERRUNS(base)            (*pCPMAC_RXSOFOVERRUNS(base))
++#define pCPMAC_RXMOFOVERRUNS(base)            ((MEM_PTR)(base+0x288))
++#define  CPMAC_RXMOFOVERRUNS(base)            (*pCPMAC_RXMOFOVERRUNS(base))
++#define pCPMAC_RXDMAOVERRUNS(base)            ((MEM_PTR)(base+0x28C))
++#define  CPMAC_RXDMAOVERRUNS(base)            (*pCPMAC_RXDMAOVERRUNS(base))
++
++#define  CPMAC_TX_HDP(base,ch)                (*(MEM_PTR)(base+0x600+(4*ch)))
++#define pCPMAC_TX0_HDP(base)                  ((MEM_PTR)(base+0x600))
++#define  CPMAC_TX0_HDP(base)                  (*pCPMAC_TX0_HDP(base))
++#define pCPMAC_TX1_HDP(base)                  ((MEM_PTR)(base+0x604))
++#define  CPMAC_TX1_HDP(base)                  (*pCPMAC_TX1_HDP(base))
++#define pCPMAC_TX2_HDP(base)                  ((MEM_PTR)(base+0x608))
++#define  CPMAC_TX2_HDP(base)                  (*pCPMAC_TX2_HDP(base))
++#define pCPMAC_TX3_HDP(base)                  ((MEM_PTR)(base+0x60C))
++#define  CPMAC_TX3_HDP(base)                  (*pCPMAC_TX3_HDP(base))
++#define pCPMAC_TX4_HDP(base)                  ((MEM_PTR)(base+0x610))
++#define  CPMAC_TX4_HDP(base)                  (*pCPMAC_TX4_HDP(base))
++#define pCPMAC_TX5_HDP(base)                  ((MEM_PTR)(base+0x614))
++#define  CPMAC_TX5_HDP(base)                  (*pCPMAC_TX5_HDP(base))
++#define pCPMAC_TX6_HDP(base)                  ((MEM_PTR)(base+0x618))
++#define  CPMAC_TX6_HDP(base)                  (*pCPMAC_TX6_HDP(base))
++#define pCPMAC_TX7_HDP(base)                  ((MEM_PTR)(base+0x61C))
++#define  CPMAC_TX7_HDP(base)                  (*pCPMAC_TX7_HDP(base))
++#define  CPMAC_RX_HDP(base,ch)                (*(MEM_PTR)(base+0x620+(4*ch)))
++#define pCPMAC_RX0_HDP(base)                  ((MEM_PTR)(base+0x620))
++#define  CPMAC_RX0_HDP(base)                  (*pCPMAC_RX0_HDP(base))
++#define pCPMAC_RX1_HDP(base)                  ((MEM_PTR)(base+0x624))
++#define  CPMAC_RX1_HDP(base)                  (*pCPMAC_RX1_HDP(base))
++#define pCPMAC_RX2_HDP(base)                  ((MEM_PTR)(base+0x628))
++#define  CPMAC_RX2_HDP(base)                  (*pCPMAC_RX2_HDP(base))
++#define pCPMAC_RX3_HDP(base)                  ((MEM_PTR)(base+0x62C))
++#define  CPMAC_RX3_HDP(base)                  (*pCPMAC_RX3_HDP(base))
++#define pCPMAC_RX4_HDP(base)                  ((MEM_PTR)(base+0x630))
++#define  CPMAC_RX4_HDP(base)                  (*pCPMAC_RX4_HDP(base))
++#define pCPMAC_RX5_HDP(base)                  ((MEM_PTR)(base+0x634))
++#define  CPMAC_RX5_HDP(base)                  (*pCPMAC_RX5_HDP(base))
++#define pCPMAC_RX6_HDP(base)                  ((MEM_PTR)(base+0x638))
++#define  CPMAC_RX6_HDP(base)                  (*pCPMAC_RX6_HDP(base))
++#define pCPMAC_RX7_HDP(base)                  ((MEM_PTR)(base+0x63C))
++#define  CPMAC_RX7_HDP(base)                  (*pCPMAC_RX7_HDP(base))
++
++
++#define CPMAC_TX_INT_ACK(base,ch)             (*(MEM_PTR)(base+0x640+(4*ch)))
++
++#define pCPMAC_TX0_INT_ACK(base)              ((MEM_PTR)(base+0x640))
++#define  CPMAC_TX0_INT_ACK(base)              (*pCPMAC_TX0_INT_ACK(base))
++#define pCPMAC_TX1_INT_ACK(base)              ((MEM_PTR)(base+0x644))
++#define  CPMAC_TX1_INT_ACK(base)              (*pCPMAC_TX1_INT_ACK(base))
++#define pCPMAC_TX2_INT_ACK(base)              ((MEM_PTR)(base+0x648))
++#define  CPMAC_TX2_INT_ACK(base)              (*pCPMAC_TX2_INT_ACK(base))
++#define pCPMAC_TX3_INT_ACK(base)              ((MEM_PTR)(base+0x64C))
++#define  CPMAC_TX3_INT_ACK(base)              (*pCPMAC_TX3_INT_ACK(base))
++#define pCPMAC_TX4_INT_ACK(base)              ((MEM_PTR)(base+0x650))
++#define  CPMAC_TX4_INT_ACK(base)              (*pCPMAC_TX4_INT_ACK(base))
++#define pCPMAC_TX5_INT_ACK(base)              ((MEM_PTR)(base+0x654))
++#define  CPMAC_TX5_INT_ACK(base)              (*pCPMAC_TX5_INT_ACK(base))
++#define pCPMAC_TX6_INT_ACK(base)              ((MEM_PTR)(base+0x658))
++#define  CPMAC_TX6_INT_ACK(base)              (*pCPMAC_TX6_INT_ACK(base))
++#define pCPMAC_TX7_INT_ACK(base)              ((MEM_PTR)(base+0x65C))
++#define  CPMAC_TX7_INT_ACK(base)              (*pCPMAC_TX7_INT_ACK(base))
++#define CPMAC_RX_INT_ACK(base,ch)             (*(MEM_PTR)(base+0x660+(4*ch)))
++         
++#define pCPMAC_RX0_INT_ACK(base)              ((MEM_PTR)(base+0x660))
++#define  CPMAC_RX0_INT_ACK(base)              (*pCPMAC_RX0_INT_ACK(base))
++#define pCPMAC_RX1_INT_ACK(base)              ((MEM_PTR)(base+0x664))
++#define  CPMAC_RX1_INT_ACK(base)              (*pCPMAC_RX1_INT_ACK(base))
++#define pCPMAC_RX2_INT_ACK(base)              ((MEM_PTR)(base+0x668))
++#define  CPMAC_RX2_INT_ACK(base)              (*pCPMAC_RX2_INT_ACK(base))
++#define pCPMAC_RX3_INT_ACK(base)              ((MEM_PTR)(base+0x66C))
++#define  CPMAC_RX3_INT_ACK(base)              (*pCPMAC_RX3_INT_ACK(base))
++#define pCPMAC_RX4_INT_ACK(base)              ((MEM_PTR)(base+0x670))
++#define  CPMAC_RX4_INT_ACK(base)              (*pCPMAC_RX4_INT_ACK(base))
++#define pCPMAC_RX5_INT_ACK(base)              ((MEM_PTR)(base+0x674))
++#define  CPMAC_RX5_INT_ACK(base)              (*pCPMAC_RX5_INT_ACK(base))
++#define pCPMAC_RX6_INT_ACK(base)              ((MEM_PTR)(base+0x678))
++#define  CPMAC_RX6_INT_ACK(base)              (*pCPMAC_RX6_INT_ACK(base))
++#define pCPMAC_RX7_INT_ACK(base)              ((MEM_PTR)(base+0x67C))
++#define  CPMAC_RX7_INT_ACK(base)              (*pCPMAC_RX7_INT_ACK(base))
++
++/****************************************************************************/
++/*                                                                          */
++/*         R E G I S T E R  B I T  D E F I N I T I O N S                    */
++/*                                                                          */
++/****************************************************************************/
++
++/* TX_CONTROL */
++
++#define TX_EN               (1 << 0)
++
++/* RX_CONTROL */
++
++#define RX_EN               (1 << 0)
++
++/* RX_MBP_ENABLE */
++
++#define RX_PASS_CRC         (1 << 30)
++#define RX_QOS_EN           (1 << 29)
++#define RX_NO_CHAIN         (1 << 28)
++
++#define RX_CMF_EN           (1 << 24)
++#define RX_CSF_EN           (1 << 23)
++#define RX_CEF_EN           (1 << 22)
++#define RX_CAF_EN           (1 << 21)
++
++#define RX_PROM_CH(n)       (n << 16)
++#define RX_PROM_CH_MASK     RX_PROM_CH(7)
++#define RX_PROM_CH_7        RX_PROM_CH(7)
++#define RX_PROM_CH_6        RX_PROM_CH(6)
++#define RX_PROM_CH_5        RX_PROM_CH(5)
++#define RX_PROM_CH_4        RX_PROM_CH(4)
++#define RX_PROM_CH_3        RX_PROM_CH(3)
++#define RX_PROM_CH_2        RX_PROM_CH(2)
++#define RX_PROM_CH_1        RX_PROM_CH(1)
++#define RX_PROM_CH_0        RX_PROM_CH(0)
++
++#define RX_BROAD_EN         (1 << 13)
++
++#define RX_BROAD_CH(n)       (n <<  8)
++#define RX_BROAD_CH_MASK     RX_BROAD_CH(7)
++#define RX_BROAD_CH_7        RX_BROAD_CH(7)
++#define RX_BROAD_CH_6        RX_BROAD_CH(6)
++#define RX_BROAD_CH_5        RX_BROAD_CH(5)
++#define RX_BROAD_CH_4        RX_BROAD_CH(4)
++#define RX_BROAD_CH_3        RX_BROAD_CH(3)
++#define RX_BROAD_CH_2        RX_BROAD_CH(2)
++#define RX_BROAD_CH_1        RX_BROAD_CH(1)
++#define RX_BROAD_CH_0        RX_BROAD_CH(0)
++
++#define RX_MULT_EN          (1 <<  5)
++
++#define RX_MULT_CH(n)       (n << 0)
++#define RX_MULT_CH_MASK     RX_MULT_CH(7)
++#define RX_MULT_CH_7        RX_MULT_CH(7)
++#define RX_MULT_CH_6        RX_MULT_CH(6)
++#define RX_MULT_CH_5        RX_MULT_CH(5)
++#define RX_MULT_CH_4        RX_MULT_CH(4)
++#define RX_MULT_CH_3        RX_MULT_CH(3)
++#define RX_MULT_CH_2        RX_MULT_CH(2)
++#define RX_MULT_CH_1        RX_MULT_CH(1)
++#define RX_MULT_CH_0        RX_MULT_CH(0)
++
++
++
++/* RX_UNICAST_SET */
++
++#define RX_CH7_EN        (1 <<  7)
++#define RX_CH6_EN        (1 <<  6)
++#define RX_CH5_EN        (1 <<  5)
++#define RX_CH4_EN        (1 <<  4)
++#define RX_CH3_EN        (1 <<  3)
++#define RX_CH2_EN        (1 <<  2)
++#define RX_CH1_EN        (1 <<  1)
++#define RX_CH0_EN        (1 <<  0)
++
++
++
++/*  MAC control */
++#define TX_PTYPE         (1 << 9)
++#define TX_PACE          (1 << 6)
++#define MII_EN           (1 << 5)
++#define TX_FLOW_EN       (1 << 4)
++#define RX_FLOW_EN       (1 << 3)
++#define MTEST            (1 << 2)
++#define CTRL_LOOPBACK    (1 << 1)
++#define FULLDUPLEX       (1 << 0)
++
++
++/* IntVec definitions  */
++#define MAC_IN_VECTOR_STATUS_INT   (1 << 19)
++#define MAC_IN_VECTOR_HOST_INT     (1 << 18)
++#define MAC_IN_VECTOR_RX_INT_OR    (1 << 17)
++#define MAC_IN_VECTOR_TX_INT_OR    (1 << 16)
++#define MAC_IN_VECTOR_RX_INT_VEC   (7 << 8)
++#define MAC_IN_VECTOR_TX_INT_VEC   (7)  
++
++
++/*  MacStatus */
++
++#define TX_HOST_ERR_CODE         (0xF << 20)
++#define TX_ERR_CH                (0x7 << 16)
++#define RX_HOST_ERR_CODE         (0xF << 12)
++#define RX_ERR_CH                (0x7 <<  8)
++#define RX_QOS_ACT               (1 << 2)
++#define RX_FLOW_ACT              (1 << 1)
++#define TX_FLOW_ACT              (1 << 0)
++#endif _INC_CPMAC_REG
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpmdio.c linux.dev/drivers/net/avalanche_cpmac/cpmdio.c
+--- linux.old/drivers/net/avalanche_cpmac/cpmdio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpmdio.c	2005-07-12 02:48:42.046593000 +0200
+@@ -0,0 +1,960 @@
++/***************************************************************************
++**  TNETD53xx Software Support
++**  Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
++**
++**  FILE: cpmdio.c
++**
++**  DESCRIPTION:
++**   MDIO Polling State Machine API. Functions will enable mii-Phy
++**   negotiation.
++**
++**  HISTORY:
++**    01Jan01 Denis, Bill      Original
++**      27Mar02 Michael Hanrahan (modified from emacmdio.c)
++**      07May02 Michael Hanrahan replaced clockwait for code delay
++**      10Jul02 Michael Hanrahan more debug, if fallback link is selected
++*****************************************************************************/
++#define __CPHAL_CPMDIO
++
++#include "mdio_reg.h"
++
++#ifdef _CPHAL_CPMAC
++#define mdioPrintf PhyDev->HalDev->OsFunc->Printf
++#else
++#define mdioPrintf printf
++#endif
++
++typedef struct _phy_device
++{
++   bit32u miibase;
++   bit32u inst;
++   bit32u PhyState;
++   bit32u MdixMask;
++   bit32u PhyMask;
++   bit32u MLinkMask;
++   bit32u PhyMode;
++#ifdef _CPHAL_CPMAC
++   HAL_DEVICE *HalDev;
++#endif
++} _PHY_DEVICE;
++
++static void   _mdioDelayEmulate(PHY_DEVICE *PhyDev, int ClockWait);
++static void   _mdioWaitForAccessComplete(PHY_DEVICE *PhyDev);
++static void   _mdioUserAccess(PHY_DEVICE *PhyDev, bit32u method, bit32u regadr, bit32u phyadr, bit32u data);
++static bit32u _mdioUserAccessRead(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr);
++static void   _mdioUserAccessWrite(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr, bit32u data);
++
++static void _mdioDisablePhy(PHY_DEVICE *PhyDev,bit32u PhyNum);
++static void _mdioPhyTimeOut(PHY_DEVICE *PhyDev);
++static void _mdioResetPhy(PHY_DEVICE *PhyDev,bit32u PhyNum);
++
++static void _mdioDumpPhy(PHY_DEVICE *PhyDev, bit32u p);
++static void _mdioDumpState(PHY_DEVICE *PhyDev);
++
++/* Auto Mdix */
++static void _mdioMdixDelay(PHY_DEVICE *PhyDev);
++static int  _mdioMdixSupported(PHY_DEVICE *PhyDev);
++
++static void _MdioDefaultState  (PHY_DEVICE *PhyDev);
++static void _MdioFindingState  (PHY_DEVICE *PhyDev);
++static void _MdioFoundState    (PHY_DEVICE *PhyDev);
++static void _MdioInitState     (PHY_DEVICE *PhyDev);
++static void _MdioLinkedState   (PHY_DEVICE *PhyDev);
++static void _MdioLinkWaitState (PHY_DEVICE *PhyDev);
++static void _MdioLoopbackState (PHY_DEVICE *PhyDev);
++static void _MdioNwayStartState(PHY_DEVICE *PhyDev);
++static void _MdioNwayWaitState (PHY_DEVICE *PhyDev);
++
++
++
++#ifndef TRUE
++#define TRUE (1==1)
++#endif
++
++#ifndef FALSE
++#define FALSE (1==2)
++#endif
++
++#define PHY_NOT_FOUND  0xFFFF    /*  Used in Phy Detection */
++
++/*PhyState breakout                                                          */
++
++#define PHY_DEV_OFFSET      (0)
++#define PHY_DEV_SIZE        (5)        /*  5 Bits used */
++#define PHY_DEV_MASK        (0x1f<<PHY_DEV_OFFSET)
++
++#define PHY_STATE_OFFSET    (PHY_DEV_SIZE+PHY_DEV_OFFSET)
++#define PHY_STATE_SIZE      (5)        /* 10 Bits used */
++#define PHY_STATE_MASK      (0x1f<<PHY_STATE_OFFSET)
++  #define INIT       (1<<PHY_STATE_OFFSET)
++  #define FINDING    (2<<PHY_STATE_OFFSET)
++  #define FOUND      (3<<PHY_STATE_OFFSET)
++  #define NWAY_START (4<<PHY_STATE_OFFSET)
++  #define NWAY_WAIT  (5<<PHY_STATE_OFFSET)
++  #define LINK_WAIT  (6<<PHY_STATE_OFFSET)
++  #define LINKED     (7<<PHY_STATE_OFFSET)
++  #define LOOPBACK   (8<<PHY_STATE_OFFSET)
++
++#define PHY_SPEED_OFFSET    (PHY_STATE_OFFSET+PHY_STATE_SIZE)
++#define PHY_SPEED_SIZE      (1)     /* 11 Bits used */
++#define PHY_SPEED_MASK      (1<<PHY_SPEED_OFFSET)
++
++#define PHY_DUPLEX_OFFSET   (PHY_SPEED_OFFSET+PHY_SPEED_SIZE)
++#define PHY_DUPLEX_SIZE     (1)     /* 12 Bits used */
++#define PHY_DUPLEX_MASK     (1<<PHY_DUPLEX_OFFSET)
++
++#define PHY_TIM_OFFSET      (PHY_DUPLEX_OFFSET+PHY_DUPLEX_SIZE)
++#define PHY_TIM_SIZE        (10)    /* 22 Bits used */
++#define PHY_TIM_MASK        (0x3ff<<PHY_TIM_OFFSET)
++  #define PHY_FIND_TO (  2<<PHY_TIM_OFFSET)
++  #define PHY_RECK_TO (200<<PHY_TIM_OFFSET)
++  #define PHY_LINK_TO (500<<PHY_TIM_OFFSET)
++  #define PHY_NWST_TO (500<<PHY_TIM_OFFSET)
++  #define PHY_NWDN_TO (800<<PHY_TIM_OFFSET)
++  #define PHY_MDIX_TO (274<<PHY_TIM_OFFSET) /* 2.74 Seconds <--Spec and empirical */
++
++#define PHY_SMODE_OFFSET    (PHY_TIM_OFFSET+PHY_TIM_SIZE)
++#define PHY_SMODE_SIZE      (5)     /* 27 Bits used */
++#define PHY_SMODE_MASK      (0x1f<<PHY_SMODE_OFFSET)
++  #define SMODE_AUTO   (0x10<<PHY_SMODE_OFFSET)
++  #define SMODE_FD100  (0x08<<PHY_SMODE_OFFSET)
++  #define SMODE_HD100  (0x04<<PHY_SMODE_OFFSET)
++  #define SMODE_FD10   (0x02<<PHY_SMODE_OFFSET)
++  #define SMODE_HD10   (0x01<<PHY_SMODE_OFFSET)
++  #define SMODE_ALL    (0x1f<<PHY_SMODE_OFFSET)
++
++#define PHY_CHNG_OFFSET    (PHY_SMODE_OFFSET+PHY_SMODE_SIZE)
++#define PHY_CHNG_SIZE      (1)     /* 28 Bits used */
++#define PHY_CHNG_MASK      (1<<PHY_CHNG_OFFSET)
++  #define PHY_CHANGE (1<<PHY_CHNG_OFFSET)
++
++#define PHY_TIMEDOUT_OFFSET    (PHY_CHNG_OFFSET+PHY_CHNG_SIZE)
++#define PHY_TIMEDOUT_SIZE      (1)     /*  29 Bits used */
++#define PHY_TIMEDOUT_MASK      (1<<PHY_TIMEDOUT_OFFSET)
++  #define PHY_MDIX_SWITCH  (1<<PHY_TIMEDOUT_OFFSET)
++
++#define PHY_MDIX_OFFSET    (PHY_TIMEDOUT_OFFSET+PHY_TIMEDOUT_SIZE)
++#define PHY_MDIX_SIZE      (1)     /*  30 Bits used */
++#define PHY_MDIX_MASK      (1<<PHY_MDIX_OFFSET)
++  #define PHY_MDIX     (1<<PHY_MDIX_OFFSET)
++
++static char *lstate[]={"NULL","INIT","FINDING","FOUND","NWAY_START","NWAY_WAIT","LINK_WAIT","LINKED", "LOOPBACK"};
++static int cpMacDebug;
++
++/*  Local MDIO Register Macros    */
++
++#define myMDIO_ALIVE           MDIO_ALIVE     (PhyDev->miibase)
++#define myMDIO_CONTROL         MDIO_CONTROL   (PhyDev->miibase)
++#define myMDIO_LINK            MDIO_LINK      (PhyDev->miibase)
++#define myMDIO_LINKINT         MDIO_LINKINT   (PhyDev->miibase)
++#define myMDIO_USERACCESS      MDIO_USERACCESS(PhyDev->miibase, PhyDev->inst)
++#define myMDIO_USERPHYSEL      MDIO_USERPHYSEL(PhyDev->miibase, PhyDev->inst)
++#define myMDIO_VER             MDIO_VER       (PhyDev->miibase)
++
++#ifndef VOLATILE32
++#define VOLATILE32(addr) (*((volatile bit32u *)(addr)))
++#endif
++
++/************************************
++***
++*** Delays at least ClockWait cylces
++*** before returning
++***
++**************************************/
++void _mdioDelayEmulate(PHY_DEVICE *PhyDev, int ClockWait)
++  {
++#ifdef _CPHAL_CPMAC                                                  /*+RC3.02*/
++  HAL_DEVICE *HalDev = PhyDev->HalDev;                               /*+RC3.02*/
++  osfuncSleep((int*)&ClockWait);                                     /*+RC3.02*/
++#else                                                                /*+RC3.02*/
++  volatile bit32u i=0;
++  while(ClockWait--)
++    {
++    i |= myMDIO_LINK; /*  MDIO register access to burn cycles */
++    }
++#endif
++  }
++
++void _mdioWaitForAccessComplete(PHY_DEVICE *PhyDev)
++  {
++  while((myMDIO_USERACCESS & MDIO_USERACCESS_GO)!=0)
++    {
++    }
++  }
++
++void _mdioUserAccess(PHY_DEVICE *PhyDev, bit32u method, bit32u regadr, bit32u phyadr, bit32u data)
++  {
++  bit32u  control;
++
++  control =  MDIO_USERACCESS_GO |
++             (method) |
++             (((regadr) << 21) & MDIO_USERACCESS_REGADR) |
++             (((phyadr) << 16) & MDIO_USERACCESS_PHYADR) |
++             ((data) & MDIO_USERACCESS_DATA);
++
++  myMDIO_USERACCESS = control;
++  }
++
++
++
++/************************************
++***
++*** Waits for MDIO_USERACCESS to be ready and reads data
++*** If 'WaitForData' set, waits for read to complete and returns Data,
++*** otherwise returns 0
++*** Note: 'data' is 16 bits but we use 32 bits
++***        to be consistent with rest of the code.
++***
++**************************************/
++bit32u _mdioUserAccessRead(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr)
++  {
++
++  _mdioWaitForAccessComplete(PhyDev);  /* Wait until UserAccess ready */
++  _mdioUserAccess(PhyDev, MDIO_USERACCESS_READ, regadr, phyadr, 0);
++  _mdioWaitForAccessComplete(PhyDev);  /* Wait for Read to complete */
++
++  return(myMDIO_USERACCESS & MDIO_USERACCESS_DATA);
++  }
++
++
++/************************************
++***
++*** Waits for MDIO_USERACCESS to be ready and writes data
++***
++**************************************/
++void _mdioUserAccessWrite(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr, bit32u data)
++  {
++  _mdioWaitForAccessComplete(PhyDev);  /* Wait until UserAccess ready */
++  _mdioUserAccess(PhyDev, MDIO_USERACCESS_WRITE, regadr, phyadr, data);
++  }
++
++void _mdioDumpPhyDetailed(PHY_DEVICE *PhyDev)
++{
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u  PhyNum;
++  int     RegData;
++
++  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
++
++  RegData = _mdioUserAccessRead(PhyDev, 0, PhyNum);
++  mdioPrintf("PhyControl: %04X, Lookback=%s, Speed=%s, Duplex=%s\n",
++    RegData,
++    RegData&PHY_LOOP?"On":"Off",
++    RegData&PHY_100?"100":"10",
++    RegData&PHY_FD?"Full":"Half");
++  RegData = _mdioUserAccessRead(PhyDev, 1, PhyNum);
++  mdioPrintf("PhyStatus: %04X, AutoNeg=%s, Link=%s\n",
++    RegData,
++    RegData&NWAY_COMPLETE?"Complete":"NotComplete",
++    RegData&PHY_LINKED?"Up":"Down");
++  RegData = _mdioUserAccessRead(PhyDev, 4, PhyNum);
++  mdioPrintf("PhyMyCapability: %04X, 100FD=%s, 100HD=%s, 10FD=%s, 10HD=%s\n",
++    RegData,
++    RegData&NWAY_FD100?"Yes":"No",
++    RegData&NWAY_HD100?"Yes":"No",
++    RegData&NWAY_FD10?"Yes":"No",
++    RegData&NWAY_HD10?"Yes":"No");
++
++  RegData = _mdioUserAccessRead(PhyDev, 5, PhyNum);
++  mdioPrintf("PhyPartnerCapability: %04X, 100FD=%s, 100HD=%s, 10FD=%s, 10HD=%s\n",
++    RegData,
++    RegData&NWAY_FD100?"Yes":"No",
++    RegData&NWAY_HD100?"Yes":"No",
++    RegData&NWAY_FD10?"Yes":"No",
++    RegData&NWAY_HD10?"Yes":"No");
++}
++void _mdioDumpPhy(PHY_DEVICE *PhyDev, bit32u p)
++  {
++  bit32u j,n,PhyAcks;
++  bit32u PhyRegAddr;
++  bit32u phy_num;
++  bit32u PhyMask  = PhyDev->PhyMask;
++
++  PhyAcks=myMDIO_ALIVE;
++  PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
++
++  for(phy_num=0,j=1;phy_num<32;phy_num++,j<<=1)
++    {
++    if (PhyAcks&j)
++      {
++      mdioPrintf("%2d%s:",phy_num,(phy_num==p)?">":" ");
++      for(PhyRegAddr=0;PhyRegAddr<6;PhyRegAddr++)
++        {
++        n = _mdioUserAccessRead(PhyDev, PhyRegAddr, phy_num);
++        mdioPrintf(" %04x",n&0x0ffff);
++        }
++      mdioPrintf("\n");
++      }
++    }
++  _mdioDumpPhyDetailed(PhyDev);
++  }
++
++void _mdioDumpState(PHY_DEVICE *PhyDev)
++  {
++  bit32u state    = PhyDev->PhyState;
++
++  if (!cpMacDebug) return;
++
++  mdioPrintf("Phy: %d, ",(state&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
++  mdioPrintf("State: %d/%s, ",(state&PHY_STATE_MASK)>>PHY_STATE_OFFSET,lstate[(state&PHY_STATE_MASK)>>PHY_STATE_OFFSET]);
++  mdioPrintf("Speed: %d, ",(state&PHY_SPEED_MASK)>>PHY_SPEED_OFFSET);
++  mdioPrintf("Dup: %d, ",(state&PHY_DUPLEX_MASK)>>PHY_DUPLEX_OFFSET);
++  mdioPrintf("Tim: %d, ",(state&PHY_TIM_MASK)>>PHY_TIM_OFFSET);
++  mdioPrintf("SMode: %d, ",(state&PHY_SMODE_MASK)>>PHY_SMODE_OFFSET);
++  mdioPrintf("Chng: %d",(state&PHY_CHNG_MASK)>>PHY_CHNG_OFFSET);
++  mdioPrintf("\n");
++
++  if (((state&PHY_STATE_MASK)!=FINDING)&&((state&PHY_STATE_MASK)!=INIT))
++    _mdioDumpPhy(PhyDev, (state&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
++  }
++
++
++void _mdioResetPhy(PHY_DEVICE *PhyDev,bit32u PhyNum)
++  {
++  bit16u PhyControlReg;
++
++  _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_RESET);
++  if (cpMacDebug)
++    mdioPrintf("cpMacMdioPhYReset(%d)\n",PhyNum);
++
++  /* Read control register until Phy Reset is complete */
++  do
++   {
++    PhyControlReg = _mdioUserAccessRead(PhyDev, PHY_CONTROL_REG, PhyNum);
++   }
++   while (PhyControlReg & PHY_RESET); /* Wait for Reset to clear */
++  }
++
++void _mdioDisablePhy(PHY_DEVICE *PhyDev,bit32u PhyNum)
++  {
++  _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_ISOLATE|PHY_PDOWN);
++
++  if (cpMacDebug)
++    mdioPrintf("cpMacMdioDisablePhy(%d)\n",PhyNum);
++
++  }
++
++void _MdioInitState(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u CurrentState;
++
++  CurrentState=*PhyState;
++  CurrentState=(CurrentState&~PHY_TIM_MASK)|(PHY_FIND_TO);
++  CurrentState=(CurrentState&~PHY_STATE_MASK)|(FINDING);
++  CurrentState=(CurrentState&~PHY_SPEED_MASK);
++  CurrentState=(CurrentState&~PHY_DUPLEX_MASK);
++  CurrentState|=PHY_CHANGE;
++
++  *PhyState=CurrentState;
++
++  }
++
++void _MdioFindingState(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u  PhyMask  = PhyDev->PhyMask;
++  bit32u  PhyNum,i,j,PhyAcks;
++
++
++  PhyNum=PHY_NOT_FOUND;
++
++  if (*PhyState&PHY_TIM_MASK)
++    {
++    *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
++    }
++   else
++    {
++    PhyAcks=myMDIO_ALIVE;
++    PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
++
++    for(i=0,j=1;(i<32)&&((j&PhyAcks)==0);i++,j<<=1);
++
++    if ((PhyAcks)&&(i<32)) PhyNum=i;
++    if (PhyNum!=PHY_NOT_FOUND)
++      {
++      /*  Phy Found! */
++      *PhyState=(*PhyState&~PHY_DEV_MASK)|((PhyNum&PHY_DEV_MASK)<<PHY_DEV_OFFSET);
++      *PhyState=(*PhyState&~PHY_STATE_MASK)|(FOUND);
++      *PhyState|=PHY_CHANGE;
++      if (cpMacDebug)
++        mdioPrintf("cpMacMdioFindingState: PhyNum: %d\n",PhyNum);
++      }
++     else
++      {
++      if (cpMacDebug)
++        mdioPrintf("cpMacMdioFindingState: Timed Out looking for a Phy!\n");
++      *PhyState|=PHY_RECK_TO;  /* This state currently has no support?*/
++      }
++    }
++  }
++
++void _MdioFoundState(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState  = &PhyDev->PhyState;
++  bit32u  PhyMask   = PhyDev->PhyMask;
++  bit32u  MLinkMask = PhyDev->MLinkMask;
++  bit32u  PhyNum,PhyStatus,NWAYadvertise,m,phynum,i,j,PhyAcks;
++  bit32u  PhySel;
++
++  if ((*PhyState&PHY_SMODE_MASK)==0) return;
++
++  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
++
++  PhyAcks=myMDIO_ALIVE;
++  PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
++
++  /* Will now isolate all our Phys, except the one we have decided to use */
++  for(phynum=0,j=1;phynum<32;phynum++,j<<=1)
++    {
++    if (PhyAcks&j)
++      {
++        if (phynum!=PhyNum)  /* Do not disabled Found Phy */
++          _mdioDisablePhy(PhyDev,phynum);
++      }
++    }
++
++  /*  Reset the Phy and proceed with auto-negotiation */
++  _mdioResetPhy(PhyDev,PhyNum);
++
++  /* Now setup the MDIOUserPhySel register */
++
++  PhySel=PhyNum;  /* Set the phy address */
++
++  /*  Set the way Link will be Monitored */
++  /* Check the Link Selection Method */
++  if ((1 << PhyNum) & MLinkMask)
++    PhySel |= MDIO_USERPHYSEL_LINKSEL;
++
++  myMDIO_USERPHYSEL = PhySel;  /* update PHYSEL */
++
++  /* Get the Phy Status */
++  PhyStatus = _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
++
++
++#ifdef _CPHAL_CPMAC
++  /*  For Phy Internal loopback test, need to wait until Phy
++      found, then set Loopback */
++  if (PhyDev->HalDev->MdioConnect & _CPMDIO_LOOPBK)
++    {
++    /* Set Phy in Loopback */
++    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_LOOP|PHY_FD);
++    /* Do a read to ensure PHY_LOOP has completed */
++    _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
++    *PhyState=(*PhyState&~PHY_STATE_MASK)|(LOOPBACK);
++    *PhyState|=PHY_CHANGE;
++    return;
++    }
++#endif
++
++
++  if (cpMacDebug)
++    mdioPrintf("Enable Phy to negotiate external connection\n");
++
++  NWAYadvertise=NWAY_SEL;
++  if (*PhyState&SMODE_FD100) NWAYadvertise|=NWAY_FD100;
++  if (*PhyState&SMODE_HD100) NWAYadvertise|=NWAY_HD100;
++  if (*PhyState&SMODE_FD10)  NWAYadvertise|=NWAY_FD10;
++  if (*PhyState&SMODE_HD10)  NWAYadvertise|=NWAY_HD10;
++
++  *PhyState&=~(PHY_TIM_MASK|PHY_STATE_MASK);
++  if ((PhyStatus&NWAY_CAPABLE)&&(*PhyState&SMODE_AUTO))   /*NWAY Phy Detected*/
++    {
++    /*For NWAY compliant Phys                                                */
++
++    _mdioUserAccessWrite(PhyDev, NWAY_ADVERTIZE_REG, PhyNum, NWAYadvertise);
++
++    if (cpMacDebug)
++      {
++      mdioPrintf("NWAY Advertising: ");
++      if (NWAYadvertise&NWAY_FD100) mdioPrintf("FullDuplex-100 ");
++      if (NWAYadvertise&NWAY_HD100) mdioPrintf("HalfDuplex-100 ");
++      if (NWAYadvertise&NWAY_FD10)  mdioPrintf("FullDuplex-10 ");
++      if (NWAYadvertise&NWAY_HD10)  mdioPrintf("HalfDuplex-10 ");
++      mdioPrintf("\n");
++      }
++
++    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN);
++
++    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN|RENEGOTIATE);
++
++    *PhyState|=PHY_CHANGE|PHY_NWST_TO|NWAY_START;
++    }
++   else
++    {
++    *PhyState&=~SMODE_AUTO;   /*The Phy is not capable of auto negotiation!  */
++    m=NWAYadvertise;
++    for(j=0x8000,i=0;(i<16)&&((j&m)==0);i++,j>>=1);
++    m=j;
++    j=0;
++    if (m&(NWAY_FD100|NWAY_HD100))
++      {
++      j=PHY_100;
++      m&=(NWAY_FD100|NWAY_HD100);
++      }
++    if (m&(NWAY_FD100|NWAY_FD10))
++      j |= PHY_FD;
++    if (cpMacDebug)
++      mdioPrintf("Requested PHY mode %s Duplex %s Mbps\n",(j&PHY_FD)?"Full":"Half",(j&PHY_100)?"100":"10");
++    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, j);
++    *PhyState&=~PHY_SPEED_MASK;
++    if (j&PHY_100)
++      *PhyState|=(1<<PHY_SPEED_OFFSET);
++    *PhyState&=~PHY_DUPLEX_MASK;
++    if (j&PHY_FD)
++      *PhyState|=(1<<PHY_DUPLEX_OFFSET);
++    *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
++    }
++     _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
++  }
++
++void _MdioNwayStartState(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u PhyNum,PhyMode;
++
++  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
++
++  /*Wait for Negotiation to start                                            */
++
++  PhyMode=_mdioUserAccessRead(PhyDev, PHY_CONTROL_REG, PhyNum);
++
++  if((PhyMode&RENEGOTIATE)==0)
++    {
++    _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum); /*Flush pending latch bits*/
++    *PhyState&=~(PHY_STATE_MASK|PHY_TIM_MASK);
++    *PhyState|=PHY_CHANGE|NWAY_WAIT|PHY_NWDN_TO;
++    _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
++    }
++   else
++    {
++    if (*PhyState&PHY_TIM_MASK)
++      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
++     else
++      _mdioPhyTimeOut(PhyDev);
++    }
++  }
++
++void _MdioNwayWaitState(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u  PhyNum,PhyStatus,NWAYadvertise,NWAYREadvertise,NegMode,i,j;
++
++  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
++
++  PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
++
++  if (PhyStatus&NWAY_COMPLETE)
++    {
++    *PhyState|=PHY_CHANGE;
++    *PhyState&=~PHY_SPEED_MASK;
++    *PhyState&=~PHY_DUPLEX_MASK;
++
++    NWAYadvertise   =_mdioUserAccessRead(PhyDev, NWAY_ADVERTIZE_REG, PhyNum);
++    NWAYREadvertise =_mdioUserAccessRead(PhyDev, NWAY_REMADVERTISE_REG, PhyNum);
++
++    /* Negotiated mode is we and the remote have in common */
++    NegMode = NWAYadvertise & NWAYREadvertise;
++
++    if (cpMacDebug)
++      {
++       mdioPrintf("Phy: %d, ",(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
++       mdioPrintf("NegMode %04X, NWAYadvertise %04X, NWAYREadvertise %04X\n",
++         NegMode,  NWAYadvertise, NWAYREadvertise);
++      }
++
++    /* Limit negotiation to fields below */
++    NegMode &= (NWAY_FD100|NWAY_HD100|NWAY_FD10|NWAY_HD10);
++
++    if (NegMode==0)
++      {
++      NegMode=(NWAY_HD100|NWAY_HD10)&NWAYadvertise; /*or 10 ?? who knows, Phy is not MII compliant*/
++      if(cpMacDebug)
++        {
++         mdioPrintf("Mdio:WARNING: Negotiation complete but NO agreement, default is HD\n");
++         _mdioDumpPhyDetailed(PhyDev);
++        } 
++      }
++    for(j=0x8000,i=0;(i<16)&&((j&NegMode)==0);i++,j>>=1);
++
++
++    NegMode=j;
++    if (cpMacDebug)
++      {
++      mdioPrintf("Negotiated connection: ");
++      if (NegMode&NWAY_FD100) mdioPrintf("FullDuplex 100 Mbs\n");
++      if (NegMode&NWAY_HD100) mdioPrintf("HalfDuplex 100 Mbs\n");
++      if (NegMode&NWAY_FD10) mdioPrintf("FullDuplex 10 Mbs\n");
++      if (NegMode&NWAY_HD10) mdioPrintf("HalfDuplex 10 Mbs\n");
++      }
++    if (NegMode!=0)
++      {
++      if (PhyStatus&PHY_LINKED)
++        *PhyState=(*PhyState&~PHY_STATE_MASK)|LINKED;
++       else
++        *PhyState=(*PhyState&~PHY_STATE_MASK)|LINK_WAIT;
++      if (NegMode&(NWAY_FD100|NWAY_HD100))
++        *PhyState=(*PhyState&~PHY_SPEED_MASK)|(1<<PHY_SPEED_OFFSET);
++      if (NegMode&(NWAY_FD100|NWAY_FD10))
++        *PhyState=(*PhyState&~PHY_DUPLEX_MASK)|(1<<PHY_DUPLEX_OFFSET);
++      }
++    }
++   else
++    {
++    if (*PhyState&PHY_TIM_MASK)
++      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
++     else
++      _mdioPhyTimeOut(PhyDev);
++    }
++  }
++
++void _MdioLinkWaitState(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u  PhyStatus;
++  bit32u  PhyNum;
++
++  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
++
++  PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
++
++  if (PhyStatus&PHY_LINKED)
++    {
++    *PhyState=(*PhyState&~PHY_STATE_MASK)|LINKED;
++    *PhyState|=PHY_CHANGE;
++    }
++   else
++    {
++    if (*PhyState&PHY_TIM_MASK)
++      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
++     else
++      _mdioPhyTimeOut(PhyDev);
++    }
++  }
++
++void _mdioPhyTimeOut(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState;
++
++  if(_mdioMdixSupported(PhyDev) == 0)
++    return;  /* AutoMdix not supported */
++
++  PhyState = &PhyDev->PhyState;
++
++  /*  Indicate MDI/MDIX mode switch is needed */
++  *PhyState|=PHY_MDIX_SWITCH;
++
++  /* Toggle the MDIX mode indicatir */
++  if(*PhyState & PHY_MDIX)
++    *PhyState &= ~PHY_MDIX_MASK;       /* Current State is MDIX, set to MDI */
++  else
++    *PhyState |=  PHY_MDIX_MASK;      /* Current State is MDI, set to MDIX */
++
++  /* Reset state machine to FOUND */
++  *PhyState=(*PhyState&~PHY_STATE_MASK)|(FOUND);
++  }
++
++void _MdioLoopbackState(PHY_DEVICE *PhyDev)
++  {
++  return;
++  }
++
++void _MdioLinkedState(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u  PhyNum   = (*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
++
++  if (myMDIO_LINK&(1<<PhyNum)) return;  /* if still Linked, exit*/
++
++  /* Not Linked */
++  *PhyState&=~(PHY_STATE_MASK|PHY_TIM_MASK);
++  if (*PhyState&SMODE_AUTO)
++    *PhyState|=PHY_CHANGE|NWAY_WAIT|PHY_NWDN_TO;
++   else
++    *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
++    
++  _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
++  }
++
++void _MdioDefaultState(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  /*Awaiting a cpMacMdioInit call                                             */
++  *PhyState|=PHY_CHANGE;
++  }
++
++
++/*User Calls*********************************************************       */
++
++void cpMacMdioClose(PHY_DEVICE *PhyDev, int Full)
++  {
++  }
++
++
++int cpMacMdioInit(PHY_DEVICE *PhyDev, bit32u miibase, bit32u inst, bit32u PhyMask, bit32u MLinkMask, bit32u MdixMask, bit32u ResetReg, bit32u ResetBit, bit32u MdioBusFreq, bit32u MdioClockFreq, int verbose, void *Info)
++  {
++  bit32u HighestChannel;
++  bit32u ControlState;
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u clkdiv;                                                  /*MJH+030328*/
++
++  cpMacDebug=verbose;  
++ 
++  PhyDev->miibase   = miibase;
++  PhyDev->inst      = inst;
++  PhyDev->PhyMask   = PhyMask;
++  PhyDev->MLinkMask = MLinkMask;
++  PhyDev->MdixMask  = MdixMask;
++#ifdef _CPHAL_CPMAC
++  PhyDev->HalDev    = (HAL_DEVICE*) Info;
++#endif
++
++  *PhyState &= ~PHY_MDIX_MASK;   /* Set initial State to MDI */
++   
++  /* Check that the channel supplied is within range */
++  HighestChannel = (myMDIO_CONTROL & MDIO_CONTROL_HIGHEST_USER_CHANNEL) > 8;
++  if(inst > HighestChannel)
++    return(HighestChannel);
++
++  /*Setup MII MDIO access regs                                              */
++
++  /* Calculate the correct value for the mclkdiv */
++  /* See PITS #14 */
++  if (MdioClockFreq)                                              /*MJH+030402*/
++     clkdiv = (MdioBusFreq / MdioClockFreq) - 1;                  /*MJH+030402*/
++  else                                                            /*MJH+030402*/
++     clkdiv = 0xFF;                                               /*MJH+030402*/
++
++  ControlState  = MDIO_CONTROL_ENABLE;
++  ControlState |= (clkdiv & MDIO_CONTROL_CLKDIV);                 /*MJH+030328*/
++
++  /*
++      If mii is not out of reset or if the Control Register is not set correctly
++      then initalize
++  */
++  if( !(VOLATILE32(ResetReg) & (1 << ResetBit)) ||
++     ((myMDIO_CONTROL & (MDIO_CONTROL_CLKDIV | MDIO_CONTROL_ENABLE)) != ControlState) )/*GSG~030404*/
++    {
++    /*  MII not setup, Setup initial condition  */
++    VOLATILE32(ResetReg) &= ~(1 << ResetBit);
++    _mdioDelayEmulate(PhyDev, 64);
++    VOLATILE32(ResetReg) |= (1 << ResetBit);  /* take mii out of reset  */
++    _mdioDelayEmulate(PhyDev, 64);
++    myMDIO_CONTROL = ControlState;  /* Enable MDIO   */
++    }
++
++  *PhyState=INIT;
++
++  if (cpMacDebug)
++    mdioPrintf("cpMacMdioInit\n");
++  _mdioDumpState(PhyDev);
++  return(0);
++  }
++
++void cpMacMdioSetPhyMode(PHY_DEVICE *PhyDev,bit32u PhyMode)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u CurrentState;
++
++  PhyDev->PhyMode = PhyMode;   /* used for AUTOMIDX, planned to replace PhyState fields */
++
++  *PhyState&=~PHY_SMODE_MASK;
++
++  if (PhyMode&NWAY_AUTO)  *PhyState|=SMODE_AUTO;
++  if (PhyMode&NWAY_FD100) *PhyState|=SMODE_FD100;
++  if (PhyMode&NWAY_HD100) *PhyState|=SMODE_HD100;
++  if (PhyMode&NWAY_FD10)  *PhyState|=SMODE_FD10;
++  if (PhyMode&NWAY_HD10)  *PhyState|=SMODE_HD10;
++
++  CurrentState=*PhyState&PHY_STATE_MASK;
++  if ((CurrentState==NWAY_START)||
++      (CurrentState==NWAY_WAIT) ||
++      (CurrentState==LINK_WAIT) ||
++      (CurrentState==LINKED)      )
++    *PhyState=(*PhyState&~PHY_STATE_MASK)|FOUND|PHY_CHANGE;
++  if (cpMacDebug)
++    mdioPrintf("cpMacMdioSetPhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
++     PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
++     PhyMode&NWAY_HD100);
++  _mdioDumpState(PhyDev);
++  }
++
++/* cpMacMdioTic is called every 10 mili seconds to process Phy states         */
++
++int cpMacMdioTic(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u  CurrentState;
++
++  /*Act on current state of the Phy                                          */
++
++  CurrentState=*PhyState;
++  switch(CurrentState&PHY_STATE_MASK)
++    {
++    case INIT:       _MdioInitState(PhyDev);      break;
++    case FINDING:    _MdioFindingState(PhyDev);   break;
++    case FOUND:      _MdioFoundState(PhyDev);     break;
++    case NWAY_START: _MdioNwayStartState(PhyDev); break;
++    case NWAY_WAIT:  _MdioNwayWaitState(PhyDev);  break;
++    case LINK_WAIT:  _MdioLinkWaitState(PhyDev);  break;
++    case LINKED:     _MdioLinkedState(PhyDev);    break;
++    case LOOPBACK:   _MdioLoopbackState(PhyDev);  break;
++    default:         _MdioDefaultState(PhyDev);   break;
++    }
++
++  /*Dump state info if a change has been detected                            */
++
++  if ((CurrentState&~PHY_TIM_MASK)!=(*PhyState&~PHY_TIM_MASK))
++    _mdioDumpState(PhyDev);
++
++  /*  Check is MDI/MDIX mode switch is needed */
++  if(*PhyState & PHY_MDIX_SWITCH)
++    {
++    bit32u Mdix;
++
++    *PhyState &= ~PHY_MDIX_SWITCH;  /* Clear Mdix Flip indicator */
++
++    if(*PhyState & PHY_MDIX)
++      Mdix = 1;
++    else
++      Mdix = 0;
++    return(_MIIMDIO_MDIXFLIP|Mdix);
++    }
++
++  /*Return state change to user                                              */
++
++  if (*PhyState&PHY_CHNG_MASK)
++    {
++    *PhyState&=~PHY_CHNG_MASK;
++    return(1);
++    }
++   else
++    return(0);
++  }
++
++/* cpMacMdioGetDuplex is called to retrieve the Duplex info                   */
++
++int cpMacMdioGetDuplex(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  return((*PhyState&PHY_DUPLEX_MASK)?1:0);  /* return 0 or a 1  */
++  }
++
++/* cpMacMdioGetSpeed is called to retreive the Speed info                     */
++
++int cpMacMdioGetSpeed(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  return(*PhyState&PHY_SPEED_MASK);
++  }
++
++/* cpMacMdioGetPhyNum is called to retreive the Phy Device Adr info           */
++
++int cpMacMdioGetPhyNum(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  return((*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
++  }
++
++/* cpMacMdioGetLoopback is called to Determine if the LOOPBACK state has been reached*/
++
++int cpMacMdioGetLoopback(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  return((*PhyState&PHY_STATE_MASK)==LOOPBACK);
++  }
++/* cpMacMdioGetLinked is called to Determine if the LINKED state has been reached*/
++
++int cpMacMdioGetLinked(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  return((*PhyState&PHY_STATE_MASK)==LINKED);
++  }
++
++void cpMacMdioLinkChange(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u  PhyNum,PhyStatus;
++
++  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
++
++  if (cpMacMdioGetLinked(PhyDev))
++    {
++    PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
++
++    if ((PhyStatus&PHY_LINKED)==0)
++      {
++      *PhyState&=~(PHY_TIM_MASK|PHY_STATE_MASK);
++      if (*PhyState&SMODE_AUTO)
++        {
++        _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN|RENEGOTIATE);
++        *PhyState|=PHY_CHANGE|PHY_NWST_TO|NWAY_START;
++        }
++       else
++        {
++        *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
++        }
++      }
++    }
++  }
++
++void cpMacMdioGetVer(bit32u miibase, bit32u *ModID,  bit32u *RevMaj,  bit32u *RevMin)
++  {
++  bit32u  Ver;
++
++  Ver = MDIO_VER(miibase);
++
++  *ModID  = (Ver & MDIO_VER_MODID) >> 16;
++  *RevMaj = (Ver & MDIO_VER_REVMAJ) >> 8;
++  *RevMin = (Ver & MDIO_VER_REVMIN);
++  }
++
++int cpMacMdioGetPhyDevSize(void)
++  {
++  return(sizeof(PHY_DEVICE));
++  }
++
++  /* returns 0 if current Phy has AutoMdix support, otherwise 0 */
++int _mdioMdixSupported(PHY_DEVICE *PhyDev)
++  {
++  bit32u *PhyState = &PhyDev->PhyState;
++  bit32u PhyNum;
++
++  if((PhyDev->PhyMode & NWAY_AUTOMDIX) == 0)
++    return(0);  /* AutoMdix not turned on */
++
++  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
++  if( ((1<<PhyNum) & PhyDev->MdixMask) == 0)
++    return(0);  /*  Phy does not support AutoMdix*/
++
++  return(1);
++  }
++
++/* If current Phy has AutoMdix support add Mdix Delay to the Timer State Value */
++void _mdioMdixDelay(PHY_DEVICE *PhyDev)
++  {
++  int Delay;
++  bit32u *PhyState = &PhyDev->PhyState;  
++#ifdef _CPHAL_CPMAC
++  HAL_DEVICE *HalDev = PhyDev->HalDev;
++#endif
++
++  if(_mdioMdixSupported(PhyDev) == 0)
++    return;  /* AutoMdix not supported */
++/* Currently only supported when used with the CPMAC */
++#ifdef _CPHAL_CPMAC
++  /* Get the Delay value in milli-seconds and convert to ten-milli second value */
++  Delay = cpmacRandomRange(HalDev, _AUTOMDIX_DELAY_MIN, _AUTOMDIX_DELAY_MAX);
++  Delay /= 10;
++
++  /*  Add AutoMidx Random Switch Delay to AutoMdix Link Delay */
++
++  Delay += (PHY_MDIX_TO>>PHY_TIM_OFFSET);
++
++  /* Change Timeout value to AutoMdix standard */
++  *PhyState &= ~(PHY_TIM_MASK);  /* Clear current Time out value */
++  *PhyState |=  (Delay<<PHY_TIM_OFFSET);     /* Set new value */
++#endif
++  }
++
++
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpmdio.h linux.dev/drivers/net/avalanche_cpmac/cpmdio.h
+--- linux.old/drivers/net/avalanche_cpmac/cpmdio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpmdio.h	2005-07-12 02:48:42.047593000 +0200
+@@ -0,0 +1,73 @@
++/*****************************************************************************
++**      TNETD53xx Software Support
++**      Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
++**
++**      FILE: cpmdio.h   User Include for MDIO API Access
++**
++**      DESCRIPTION:
++**              This include file contains definitions for the the MDIO API
++**
++**      HISTORY:
++**              27Mar02 Michael Hanrahan Original (modified from emacmdio.h)
++**              04Apr02 Michael Hanrahan Added Interrupt Support
++*****************************************************************************/
++#ifndef _INC_CPMDIO
++#define _INC_CPMDIO
++
++
++#ifndef __CPHAL_CPMDIO
++typedef void PHY_DEVICE;
++#endif
++
++
++/*Version Information */
++
++void cpMacMdioGetVer(bit32u miiBase, bit32u *ModID,  bit32u *RevMaj,  bit32u *RevMin);
++
++/*Called once at the begining of time                                        */
++
++int  cpMacMdioInit(PHY_DEVICE *PhyDev, bit32u miibase, bit32u inst, bit32u PhyMask, bit32u MLinkMask, bit32u MdixMask, bit32u ResetBase, bit32u ResetBit, bit32u MdioBusFreq, bit32u MdioClockFreq, int verbose, void *Info);
++int  cpMacMdioGetPhyDevSize(void);
++
++
++/*Called every 10 mili Seconds, returns TRUE if there has been a mode change */
++
++int cpMacMdioTic(PHY_DEVICE *PhyDev);
++
++/*Called to set Phy mode                                                     */
++
++void cpMacMdioSetPhyMode(PHY_DEVICE *PhyDev,bit32u PhyMode);
++
++/*Calls to retreive info after a mode change!                                */
++
++int  cpMacMdioGetDuplex(PHY_DEVICE *PhyDev);
++int  cpMacMdioGetSpeed(PHY_DEVICE *PhyDev);
++int  cpMacMdioGetPhyNum(PHY_DEVICE *PhyDev);
++int  cpMacMdioGetLinked(PHY_DEVICE *PhyDev);
++void cpMacMdioLinkChange(PHY_DEVICE *PhyDev);
++
++/*  Shot Down  */
++
++void cpMacMdioClose(PHY_DEVICE *PhyDev, int Full);
++
++
++/* Phy Mode Values  */
++#define NWAY_AUTOMDIX       (1<<16)
++#define NWAY_FD100          (1<<8)
++#define NWAY_HD100          (1<<7)
++#define NWAY_FD10           (1<<6)
++#define NWAY_HD10           (1<<5)
++#define NWAY_AUTO           (1<<0)
++
++/*
++ *
++ *    Tic() return values
++ *
++ */
++
++#define _MIIMDIO_MDIXFLIP (1<<28)
++
++#define _AUTOMDIX_DELAY_MIN  80  /* milli-seconds*/
++#define _AUTOMDIX_DELAY_MAX 200  /* milli-seconds*/
++
++#endif  /*  _INC_CPMDIO */
+diff -urN linux.old/drivers/net/avalanche_cpmac/cppi_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cppi_cpmac.c
+--- linux.old/drivers/net/avalanche_cpmac/cppi_cpmac.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cppi_cpmac.c	2005-07-12 02:48:42.048593000 +0200
+@@ -0,0 +1,1345 @@
++/*************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE: cppi.c
++ *
++ *  DESCRIPTION:
++ *      This file contains shared code for all CPPI modules.
++ *
++ *  HISTORY:
++ *   7Aug02 Greg RC1.00  Original Version created.
++ *  27Sep02 Mick RC1.01  Merged for use by CPMAC/CPSAR
++ *  16Oct02 Mick RC1.02  Performance Tweaks (see cppihist.txt)
++ *  12Nov02 Mick RC1.02  Updated to use cpmac_reg.h
++ *  09Jan03 Mick RC3.01  Removed modification to RxBuffer ptr
++ *  28Mar03 Mick 1.03    RxReturn now returns error if Malloc Fails
++ *  10Apr03 Mick 1.03.02 Added Needs Buffer Support
++ *  11Jun03 Mick 1.06.02 halSend() errors corrected
++ *  23Aug04 Mick 1.07.08 cpmac only - Send: bypass threshold check if TxInts re-enabled
++ *
++ *  @author  Greg Guyotte
++ *  @version 1.00
++ *  @date    7-Aug-2002
++ *****************************************************************************/
++/* each CPPI module must modify this file, the rest of the
++                     code in cppi.c should be totally shared *//* Each CPPI module MUST properly define all constants shown below */
++
++/* CPPI registers */
++
++/* the following defines are not CPPI specific */
++
++static int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork);                     
++
++static void FreeRx(HAL_DEVICE *HalDev, int Ch)
++  {
++   HAL_RCB *rcb_ptr;                                                /*+GSG 030303*/
++   int rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;                        /*+GSG 030303*/
++   int Num = HalDev->ChData[Ch].RxNumBuffers, i;                    /*+GSG 030303*/
++
++   /* Free Rx data buffers attached to descriptors, if necessary */
++   if (HalDev->RcbStart[Ch] != 0)                                   /*+GSG 030303*/
++     {                                                              /*+GSG 030303*/
++      for(i=0;i<Num;i++)                                            /*+GSG 030303*/
++        {                                                           /*+GSG 030303*/
++         rcb_ptr = (HAL_RCB *)(HalDev->RcbStart[Ch] + (i*rcbSize)); /*+GSG 030303*/
++
++         /* free the data buffer */
++         if (rcb_ptr->DatPtr != 0)
++       {
++
++        HalDev->OsFunc->FreeRxBuffer((void *)rcb_ptr->OsInfo, (void *)rcb_ptr->DatPtr);
++        rcb_ptr->OsInfo=0;                                        /*MJH+030522*/
++        rcb_ptr->DatPtr=0;                                        /*MJH+030522*/
++       }
++    }                                                           /*+GSG 030303*/
++     }                                                              /*+GSG 030303*/
++
++   /* free up all desciptors at once */
++   HalDev->OsFunc->FreeDmaXfer(HalDev->RcbStart[Ch]);
++
++   /* mark buffers as freed */
++   HalDev->RcbStart[Ch] = 0;
++  }
++
++static void FreeTx(HAL_DEVICE *HalDev, int Ch, int Queue)
++  {
++
++/*+GSG 030303*/
++
++   /* free all descriptors at once */
++   HalDev->OsFunc->FreeDmaXfer(HalDev->TcbStart[Ch][Queue]);
++
++   HalDev->TcbStart[Ch][Queue] = 0;
++  }
++
++/* return of 0 means that this code executed, -1 means the interrupt was not
++   a teardown interrupt */
++static int RxTeardownInt(HAL_DEVICE *HalDev, int Ch)
++  {
++   bit32u base = HalDev->dev_base;
++
++   /* check to see if the interrupt is a teardown interrupt */
++   if (((CPMAC_RX_INT_ACK( base , Ch ))  & TEARDOWN_VAL) == TEARDOWN_VAL)
++     {
++      /* finish channel teardown */
++
++      /* Free channel resources on a FULL teardown */
++      if (HalDev->RxTeardownPending[Ch] & FULL_TEARDOWN)
++        {
++         FreeRx(HalDev, Ch);
++        }
++
++      /* bug fix - clear Rx channel pointers on teardown */
++      HalDev->RcbPool[Ch] = 0;
++      HalDev->RxActQueueHead[Ch]  = 0;
++      HalDev->RxActQueueCount[Ch] = 0;
++      HalDev->RxActive[Ch] = FALSE;
++
++      /* write completion pointer */
++      (CPMAC_RX_INT_ACK( base , Ch ))  = TEARDOWN_VAL;
++
++      /* use direction bit as a teardown pending bit! May be able to
++         use only one teardown pending integer in HalDev */
++
++      HalDev->RxTeardownPending[Ch] &= ~RX_TEARDOWN;
++
++      HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
++
++      HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
++      CPMAC_RX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Ch);
++      if ((HalDev->RxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
++    {
++
++     HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_RX);
++    }
++      HalDev->RxTeardownPending[Ch] = 0;
++
++      return (EC_NO_ERRORS);
++     }
++   return (-1);
++  }
++
++/* return of 0 means that this code executed, -1 means the interrupt was not
++   a teardown interrupt.  Note: this code is always called with Queue == 0 (hi priority). */
++static int TxTeardownInt(HAL_DEVICE *HalDev, int Ch, int Queue)
++  {
++   bit32u base = HalDev->dev_base;
++   HAL_TCB *Last, *Curr, *First;                                    /*+GSG 030303*/
++   int i;
++
++   if (((CPMAC_TX_INT_ACK( base , Ch ))  & TEARDOWN_VAL) == TEARDOWN_VAL)
++     {
++      /* perform all actions for both queues (+GSG 040212) */
++      for (i=0; i<HalDev->ChData[Ch].TxNumQueues; i++)
++        {
++         /* return outstanding buffers to OS                             +RC3.02*/
++         Curr = HalDev->TxActQueueHead[Ch][i];                     /*+GSG 030303*/
++         First = Curr;                                                 /*+GSG 030303*/
++         while (Curr)                                                  /*+GSG 030303*/
++           {                                                           /*+GSG 030303*/
++            /* Pop TCB(s) for packet from the stack */                 /*+GSG 030303*/
++            Last = Curr->Eop;                                          /*+GSG 030303*/
++            HalDev->TxActQueueHead[Ch][i] = Last->Next;            /*+GSG 030303*/
++                                                                    /*+GSG 030303*/
++            /* return to OS */                                         /*+GSG 030303*/
++            HalDev->OsFunc->SendComplete(Curr->OsInfo);                /*+GSG 030303*/
++                                                                    /*+GSG 030303*/
++            /* Push Tcb(s) back onto the stack */                      /*+GSG 030303*/
++            Curr = Last->Next;                                         /*+GSG 030303*/
++            Last->Next = HalDev->TcbPool[Ch][i];                   /*+GSG 030303*/
++            HalDev->TcbPool[Ch][i] = First;                        /*+GSG 030303*/
++                                                                    /*+GSG 030303*/
++            /* set the first(SOP) pointer for the next packet */       /*+GSG 030303*/
++            First = Curr;                                              /*+GSG 030303*/
++           }                                                           /*+GSG 030303*/
++        }
++
++      /* finish channel teardown */
++
++      if (HalDev->TxTeardownPending[Ch] & FULL_TEARDOWN)
++        {
++         FreeTx(HalDev, Ch, 0);
++
++         if (HalDev->ChData[Ch].TxNumQueues == 2)
++           FreeTx(HalDev, Ch, 1);
++        } /* if FULL teardown */
++
++      /* perform all actions for both queues (+GSG 040212) */
++      for (i=0; i<HalDev->ChData[Ch].TxNumQueues; i++)
++        {
++         /* bug fix - clear Tx channel pointers on teardown */
++         HalDev->TcbPool[Ch][i] = 0;
++         HalDev->TxActQueueHead[Ch][i]  = 0;
++         HalDev->TxActQueueCount[Ch][i] = 0;
++         HalDev->TxActive[Ch][i]        = FALSE;
++        }
++
++      /* write completion pointer, only needed for the high priority queue */
++      (CPMAC_TX_INT_ACK( base , Ch ))  = TEARDOWN_VAL;
++
++      /* no longer pending teardown */
++      HalDev->TxTeardownPending[Ch] &= ~TX_TEARDOWN;
++
++      HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
++
++      HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
++      CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Ch);
++      if ((HalDev->TxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
++        {
++
++         HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX);
++        }
++      HalDev->TxTeardownPending[Ch] = 0;
++
++      return (EC_NO_ERRORS);
++     }
++   return (-1);
++  }
++
++/* +GSG 030421 */
++static void AddToRxQueue(HAL_DEVICE *HalDev, HAL_RCB *FirstRcb, HAL_RCB *LastRcb, int FragCount, int Ch)
++  {
++   if (HalDev->RxActQueueHead[Ch]==0)
++     {
++
++      HalDev->RxActQueueHead[Ch]=FirstRcb;
++      HalDev->RxActQueueTail[Ch]=LastRcb;
++      if (!HalDev->RxActive[Ch])
++        {
++         /* write Rx Queue Head Descriptor Pointer */
++         ((CPMAC_RX_HDP(  HalDev->dev_base  ,  Ch  )) )  = VirtToPhys(FirstRcb) - HalDev->offset;
++         HalDev->RxActive[Ch]=TRUE;
++        }
++     }
++    else
++     {
++      register HAL_RCB *OldTailRcb;
++      register bit32u rmode;
++      
++      HalDev->OsFunc->CriticalOn();
++      OldTailRcb=HalDev->RxActQueueTail[Ch];
++      OldTailRcb->Next=(void *)FirstRcb;
++      OldTailRcb=VirtToVirtNoCache(OldTailRcb);
++      OldTailRcb->HNext=VirtToPhys(FirstRcb) - HalDev->offset;
++      HalDev->RxActQueueTail[Ch]=LastRcb;
++      rmode=OldTailRcb->mode;
++      if (rmode&CB_EOQ_BIT)
++        {
++        rmode&=~CB_EOQ_BIT;
++        ((CPMAC_RX_HDP(  HalDev->dev_base  ,  Ch  )) )  = VirtToPhys(FirstRcb) - HalDev->offset;
++        OldTailRcb->mode=rmode;
++        }   
++      HalDev->OsFunc->CriticalOff();
++     }
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function is called to indicate to the CPHAL that the upper layer
++ *  software has finished processing the receive data (given to it by
++ *  osReceive()).  The CPHAL will then return the appropriate receive buffers
++ *  and buffer descriptors to the available pool.
++ *
++ *  @param   HalReceiveInfo   Start of receive buffer descriptor chain returned to
++ *                      CPHAL.
++ *  @param   StripFlag  Flag indicating whether the upper layer software has
++ *                      retained ownership of the receive data buffers.
++ *<BR>
++ * 'FALSE' means  that the CPHAL can reuse the receive data buffers.
++ *<BR>
++ * 'TRUE' : indicates the data buffers were retained by the OS
++ *<BR>
++ * NOTE:  If StripFlag is TRUE, it is the responsibility of the upper layer software to free the buffers when they are no longer needed.
++ *
++ *  @return EC_NO_ERRORS (ok). <BR>
++ *          Possible Error Codes:<BR>
++ *          @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *          @ref EC_VAL_RCB_NEEDS_BUFFER "EC_VAL_RCB_NEEDS_BUFFER"<BR>
++ *          @ref EC_VAL_RCB_DROPPED "EC_VAL_RCB_DROPPED"<BR>
++ */
++static int halRxReturn(HAL_RECEIVEINFO *HalReceiveInfo,
++            int StripFlag)
++  {
++   int Ch, i;
++   HAL_RCB *LastRcb;
++   HAL_DEVICE *HalDev;
++   int RcbSize;
++   int FragCount;
++
++   Ch = HalReceiveInfo->mode&0x0ff;
++   HalDev = (HAL_DEVICE *)HalReceiveInfo->Off_BLen;
++   FragCount = HalReceiveInfo->mode>>8;
++      
++   if (HalDev->State != enOpened)
++     return(EC_CPMAC |EC_FUNC_RXRETURN|EC_VAL_INVALID_STATE);
++
++   LastRcb=(HAL_RCB *)HalReceiveInfo->Eop;
++   LastRcb->HNext=0;
++   LastRcb->Next=0;
++   RcbSize = HalDev->ChData[Ch].RxBufSize;
++
++   if (FragCount>1)
++     {
++      LastRcb->Off_BLen=RcbSize;
++      LastRcb->mode=CB_OWNERSHIP_BIT;
++     }
++
++   HalReceiveInfo->Off_BLen=RcbSize;
++   HalReceiveInfo->mode=CB_OWNERSHIP_BIT;
++
++   /* If OS has kept the buffers for this packet, attempt to alloc new buffers */
++   if (StripFlag)
++     {
++      int rc=0;                                                      /*MJH+030417*/
++      int GoodCount=0;                                               /*GSG+030421*/       
++      HAL_RCB *TempRcb;
++      char *pBuf;
++      HAL_RCB *CurrHeadRcb = HalReceiveInfo, *LastGoodRcb=0;         /* +GSG 030421 */
++
++      TempRcb = HalReceiveInfo;
++      for (i=0; i<FragCount; i++)
++        {
++         if (TempRcb == 0)
++           {
++            dbgPrintf("Rx Return error while allocating new buffers\n");
++            dbgPrintf("Rcb = %08x, Rcb->Eop = %08x, FragCount = %d:%d\n",
++              (bit32u)HalReceiveInfo, (bit32u)HalReceiveInfo->Eop, FragCount,i);
++            osfuncSioFlush();
++
++            return(EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_CORRUPT_RCB_CHAIN);
++           }
++
++         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(RcbSize,0,
++                             0xF,HalDev->ChData[Ch].OsSetup,
++                             (void *)TempRcb,
++                             (void *)&TempRcb->OsInfo,
++                             (void *) HalDev->OsDev);
++         if (!pBuf)
++           {
++            /* malloc failed, add this RCB to Needs Buffer List */
++            (HAL_RCB *)TempRcb->Eop = TempRcb;                                  /* GSG +030430 */
++            TempRcb->mode=1<<8|Ch;
++            TempRcb->Off_BLen=(bit32u)HalDev;
++            
++            if(HalDev->NeedsCount < MAX_NEEDS)                                  /* +MJH 030410 */
++              {                                                                 /* +MJH 030410 */
++               HalDev->Needs[HalDev->NeedsCount] = (HAL_RECEIVEINFO *) TempRcb; /* +MJH 030410 */
++               HalDev->NeedsCount++;                                            /* +MJH 030410 */
++               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_NEEDS_BUFFER);         /* ~MJH 030417 */
++              }                                                                 /* +MJH 030410 */
++             else                                                               /* +MJH 030410 */
++               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_DROPPED);              /* ~MJH 030417 */
++
++            /* requeue any previous RCB's that were ready to go before this one */
++            if (GoodCount > 0)                                                  /* +GSG 030421 */
++              {                                                                 /* +GSG 030421 */
++               LastGoodRcb->HNext=0;                                            /* +GSG 030430 */
++               LastGoodRcb->Next=0;                                             /* +GSG 030430 */
++               osfuncDataCacheHitWritebackAndInvalidate((void *)LastGoodRcb, 16);            /* +GSG 030430 */
++
++               AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);   /* +GSG 030421 */
++               GoodCount = 0;                                                   /* +GSG 030421 */
++              }                                                                 /* +GSG 030421 */
++
++            CurrHeadRcb = TempRcb->Next;                                        /* +GSG 030421 */
++           }
++          else                                                                  /* +GSG 030421 */
++           {                                                                    /* +GSG 030421 */
++            /* malloc succeeded, requeue the RCB to the hardware */
++            TempRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
++            TempRcb->DatPtr=pBuf;
++            /* Emerald fix 10/29 */
++            osfuncDataCacheHitWritebackAndInvalidate((void *)TempRcb, 16);
++
++            /* i store the last good RCB in case the malloc fails for the
++               next fragment.  This ensures that I can go ahead and return
++               a partial chain of RCB's to the hardware */
++            LastGoodRcb = TempRcb;                                              /* +GSG 030421 */
++            GoodCount++;                                                        /* +GSG 030421 */
++           }                                                                    /* +GSG 030421 */
++         TempRcb = TempRcb->Next;
++        } /*  end of Frag loop */
++      /* if there any good RCB's to requeue, do so here */
++      if (GoodCount > 0)                                                        /* +GSG 030421 */
++        {
++         AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);          /* +GSG 030421 */
++        }
++      return(rc);                                                               /* ~GSG 030421 */
++     }
++   else
++     {
++      /*  Not Stripping */
++      /* Emerald */
++      /* Write Back SOP and last RCB */
++      osfuncDataCacheHitWritebackAndInvalidate((void *)HalReceiveInfo, 16);
++
++      if (FragCount > 1)
++        {
++         osfuncDataCacheHitWritebackAndInvalidate((void *)LastRcb, 16);
++        }
++      /* if not stripping buffers, always add to queue */
++      AddToRxQueue(HalDev, HalReceiveInfo, LastRcb, FragCount, Ch); /*MJH~030520*/
++     }
++
++   return(EC_NO_ERRORS);
++  }
++
++/* +MJH 030410
++   Trys to liberate an RCB until liberation fails.
++   Note: If liberation fails then RxReturn will re-add the RCB to the
++         Needs list.
++*/
++static void NeedsCheck(HAL_DEVICE *HalDev)
++{
++    HAL_RECEIVEINFO* HalRcb;
++    int rc;
++    HalDev->OsFunc->CriticalOn();
++    while(HalDev->NeedsCount)
++      {
++      HalDev->NeedsCount--;
++      HalRcb = HalDev->Needs[HalDev->NeedsCount];
++      rc =  halRxReturn(HalRcb, 1);
++      /* short circuit if RxReturn starts to fail */
++      if (rc != 0)
++        break;
++      }
++    HalDev->OsFunc->CriticalOff();
++}
++
++/*
++ *  This function allocates transmit buffer descriptors (internal CPHAL function).
++ *  It creates a high priority transmit queue by default for a single Tx
++ *  channel.  If QoS is enabled for the given CPHAL device, this function
++ *  will also allocate a low priority transmit queue.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
++ *  @param   Ch       Channel number.
++ *
++ *  @return  0 OK, Non-Zero Not OK
++ */
++static int InitTcb(HAL_DEVICE *HalDev, int Ch)
++  {
++   int i, Num = HalDev->ChData[Ch].TxNumBuffers;
++   HAL_TCB *pTcb=0;
++   char *AllTcb;
++   int  tcbSize, Queue;
++   int SizeMalloc;
++
++   tcbSize = (sizeof(HAL_TCB)+0xf)&~0xf;
++   SizeMalloc = (tcbSize*Num)+0xf;
++
++   for (Queue=0; Queue < HalDev->ChData[Ch].TxNumQueues; Queue++)
++     {
++      if (HalDev->TcbStart[Ch][Queue] == 0)
++        {
++
++         /* malloc all TCBs at once */
++         AllTcb = (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
++         if (!AllTcb)
++           {
++            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_TCB_MALLOC_FAILED);
++           }
++
++         HalDev->OsFunc->Memset(AllTcb, 0, SizeMalloc);
++
++         /* keep this address for freeing later */
++         HalDev->TcbStart[Ch][Queue] = AllTcb;
++        }
++       else
++        {
++         /* if the memory has already been allocated, simply reuse it! */
++         AllTcb = HalDev->TcbStart[Ch][Queue];
++        }
++
++      /* align to cache line */
++      AllTcb = (char *)(((bit32u)AllTcb + 0xf) &~ 0xf); /*PITS #143  MJH~030522*/
++
++      /* default High priority transmit queue */
++      HalDev->TcbPool[Ch][Queue]=0;
++      for(i=0;i<Num;i++)
++        {
++         /*pTcb=(HAL_TCB *) OsFunc->MallocDmaXfer(sizeof(HAL_TCB),0,0xffffffff); */
++         pTcb= (HAL_TCB *)(AllTcb + (i*tcbSize));
++         pTcb->mode=0;
++         pTcb->BufPtr=0;
++         pTcb->Next=HalDev->TcbPool[Ch][Queue];
++         pTcb->Off_BLen=0;
++         HalDev->TcbPool[Ch][Queue]=pTcb;
++        }
++      /*HalDev->TcbEnd = pTcb;*/
++     }
++
++   return(EC_NO_ERRORS);
++  }
++
++/*
++ *  This function allocates receive buffer descriptors (internal CPHAL function).
++ *  After allocation, the function 'queues' (gives to the hardware) the newly
++ *  created receive buffers to enable packet reception.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
++ *  @param   Ch    Channel number.
++ *
++ *  @return  0 OK, Non-Zero Not OK
++ */
++static int InitRcb(HAL_DEVICE *HalDev, int Ch)
++  {
++   int i, Num = HalDev->ChData[Ch].RxNumBuffers;
++   int Size = HalDev->ChData[Ch].RxBufSize;
++   HAL_RCB *pRcb;
++   char *pBuf;
++   char *AllRcb;
++   int  rcbSize;
++   int  DoMalloc = 0;
++   int SizeMalloc;
++   int MallocSize;
++
++   rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;
++   SizeMalloc = (rcbSize*Num)+0xf;
++
++   if (HalDev->RcbStart[Ch] == 0)
++     {
++      DoMalloc = 1;
++
++      /* malloc all RCBs at once */
++      AllRcb= (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
++      if (!AllRcb)
++        {
++         return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RCB_MALLOC_FAILED);
++        }
++
++      HalDev->OsFunc->Memset(AllRcb, 0, SizeMalloc);
++
++      /* keep this address for freeing later */
++      HalDev->RcbStart[Ch] = AllRcb;
++     }
++    else
++     {
++      /* if the memory has already been allocated, simply reuse it! */
++      AllRcb = HalDev->RcbStart[Ch];
++     }
++
++   /* align to cache line */
++   AllRcb = (char *)(((bit32u)AllRcb + 0xf)&~0xf);  /*PITS #143  MJH~030522*/
++
++   HalDev->RcbPool[Ch]=0;
++   for(i=0;i<Num;i++)
++     {
++      pRcb = (HAL_RCB *)(AllRcb + (i*rcbSize));
++
++      if (DoMalloc == 1)
++        {
++
++         MallocSize = Size;                                       /*~3.01 */
++         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(MallocSize,0,0xF,HalDev->ChData[Ch].OsSetup, (void *)pRcb, (void *)&pRcb->OsInfo, (void *) HalDev->OsDev);
++         if(!pBuf)
++             {
++            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RX_BUFFER_MALLOC_FAILED);
++             }
++           /* -RC3.01 pBuf = (char *)(((bit32u)pBuf+0xF) & ~0xF); */
++         pRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
++         pRcb->DatPtr=pBuf;
++        }
++      pRcb->mode=(1<<8)|Ch; /* One Frag for Ch */
++      pRcb->Next=(void *)HalDev->RcbPool[Ch];
++      pRcb->Off_BLen=(bit32u)HalDev;
++      HalDev->RcbPool[Ch]=pRcb;
++     }
++
++   /* Give all of the Rx buffers to hardware */
++
++   while(HalDev->RcbPool[Ch])
++     {
++      pRcb=HalDev->RcbPool[Ch];
++      HalDev->RcbPool[Ch]=pRcb->Next;
++      pRcb->Eop=(void*)pRcb;
++      pRcb->mode=(1<<8)|Ch;
++      halRxReturn((HAL_RECEIVEINFO *)pRcb, 0);
++     }
++
++   return(EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function transmits the data in FragList using available transmit
++ *  buffer descriptors.  More information on the use of the Mode parameter
++ *  is available in the module-specific appendices.  Note:  The OS should
++ *  not call Send() for a channel that has been requested to be torndown.
++ *
++ *  @param   HalDev      CPHAL module instance. (set by cphalInitModule())
++ *  @param   FragList    Fragment List structure.
++ *  @param   FragCount   Number of fragments in FragList.
++ *  @param   PacketSize  Number of bytes to transmit.
++ *  @param   OsSendInfo  OS Send Information structure. <BR>
++ *  @param   Mode        32-bit value with the following bit fields: <BR>
++ *                       31-16: Mode  (used for module specific data). <BR>
++ *                       15-08: Queue (transmit queue to send on). <BR>
++ *                       07-00: Channel (channel number to send on).
++ *
++ *  @return  EC_NO_ERRORS (ok). <BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           @ref EC_VAL_NOT_LINKED "EC_VAL_NOT_LINKED"<BR>
++ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
++ *           @ref EC_VAL_OUT_OF_TCBS "EC_VAL_OUT_OF_TCBS"<BR>
++ *           @ref EC_VAL_NO_TCBS "EC_VAL_NO_TCBS"<BR>
++ */
++static int halSend(HAL_DEVICE *HalDev,FRAGLIST *FragList,
++                      int FragCount,int PacketSize, OS_SENDINFO *OsSendInfo,
++                      bit32u Mode)
++  {
++  HAL_TCB *tcb_ptr, *head;
++  int i;
++  int rc = EC_NO_ERRORS;
++  int Ch = Mode & 0xFF;
++  int Queue = (Mode>>8)&0xFF;
++  /*int DoThresholdCheck=1;  */ /* Used when TxIntDisable is set and TxInts are re-enabled */
++  
++  if (HalDev->State != enOpened)
++     return(EC_CPPI|EC_FUNC_SEND|EC_VAL_INVALID_STATE);
++
++  if (!HalDev->Linked)
++    {
++     rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NOT_LINKED;
++     return(rc);
++    }
++
++  if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)                    /*MJH~030611*/ /*PITS 148*/
++    return(EC_CPMAC |EC_FUNC_SEND|EC_VAL_INVALID_CH);              /*+GSG 030303*/
++
++  HalDev->OsFunc->CriticalOn();
++
++  /* Setup Tx mode and size */
++  if (PacketSize<60)
++    {
++     FragList[FragCount-1].len += (60 - PacketSize);              /*MJH~030506*//*PITS 132*/
++     PacketSize = 60;                                             /*MJH~030506*/
++    }
++  Mode &= CB_PASSCRC_BIT;
++
++  tcb_ptr = head = HalDev->TcbPool[Ch][Queue];
++
++  if (tcb_ptr)
++    {
++
++     Mode|=PacketSize|CB_SOF_BIT|CB_OWNERSHIP_BIT;
++
++     for (i=0; i<FragCount; i++)
++
++       {
++        /* Setup Tx mode and size */
++        tcb_ptr->Off_BLen = FragList[i].len;
++        
++        tcb_ptr->mode     = Mode;
++        tcb_ptr->BufPtr   = VirtToPhys((bit32 *)FragList[i].data) - HalDev->offset;
++        tcb_ptr->OsInfo = OsSendInfo;
++
++        if (i == (FragCount - 1))
++          {
++           /* last fragment */
++           tcb_ptr->mode |= CB_EOF_BIT;
++
++           /* since this is the last fragment, set the TcbPool pointer before
++              nulling out the Next pointers */
++
++           HalDev->TcbPool[Ch][Queue] = tcb_ptr->Next;
++
++           tcb_ptr->Next = 0;
++           tcb_ptr->HNext = 0;
++
++           /* In the Tx Interrupt handler, we will need to know which TCB is EOP,
++              so we can save that information in the SOP */
++           head->Eop = tcb_ptr;
++
++           /* Emerald fix 10/29 */
++       osfuncDataCacheHitWritebackAndInvalidate((void *)tcb_ptr, 16);
++
++          }
++         else
++          {
++           Mode=CB_OWNERSHIP_BIT;
++           tcb_ptr->HNext    = VirtToPhys((bit32 *)tcb_ptr->Next) - HalDev->offset;
++        
++           /* Emerald fix 10/29 */
++           osfuncDataCacheHitWritebackAndInvalidate((void *)tcb_ptr, 16);
++
++           tcb_ptr = tcb_ptr->Next;  /* what about the end of TCB list?? */
++
++           if (tcb_ptr == 0)
++             {
++              rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_OUT_OF_TCBS;
++              goto ExitSend;
++             }
++          }
++       } /* for */
++
++     /* put it on the high priority queue */
++     if (HalDev->TxActQueueHead[Ch][Queue] == 0)
++       {
++        HalDev->TxActQueueHead[Ch][Queue]=head;
++        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
++/*+GSG 030303*//*+GSG 030303*/
++        if (!HalDev->TxActive[Ch][Queue])
++          {
++
++              bit32u base = HalDev->dev_base;
++              
++              /* write CPPI TX HDP */
++              (CPMAC_TX_HDP( base , Ch ))  = VirtToPhys(head)  - HalDev->offset;
++              HalDev->TxActive[Ch][Queue]=TRUE;
++
++          }
++       }
++      else
++       {
++	    register volatile HAL_TCB *pTailTcb;   
++        register bit32u tmode;
++        register bit32u pCurrentTcb;
++        
++        HalDev->TxActQueueTail[Ch][Queue]->Next=head;
++        /* Emerald fix 10/29 */
++        
++        pTailTcb=(HAL_TCB *)VirtToVirtNoCache(&HalDev->TxActQueueTail[Ch][Queue]->HNext);
++        pCurrentTcb=VirtToPhys(head)  - HalDev->offset;
++        pTailTcb->HNext=pCurrentTcb;
++        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
++/*+GSG 030303*/
++        tmode=pTailTcb->mode;  
++        if (tmode&CB_EOQ_BIT)
++          {
++           bit32u base = HalDev->dev_base;
++
++           tmode&=~CB_EOQ_BIT;
++           pTailTcb->mode=tmode;
++           ((CPMAC_TX_HDP( base , Ch )) )  = pCurrentTcb;
++          }
++
++        else
++          {
++           if(HalDev->TxIntDisable)
++             {
++              /*  Enable Interrupts, to ensure packet goes out on wire */
++              CPMAC_TX_INTMASK_SET(HalDev->dev_base) = (1<<Ch); 
++              halPacketProcessEnd(HalDev); /* Allow Interrupt to be seen at the OS */
++              /*DoThresholdCheck = 0; */       /* Disable Threshold Check */
++
++             }       
++          }
++
++       }
++     rc = EC_NO_ERRORS;
++     goto ExitSend;
++    } /* if (tcb_ptr) */
++   else
++    {
++     rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NO_TCBS;
++     goto ExitSend;
++    }
++ExitSend:
++
++/* 15 June 2004 - NSP Performance Update : If Tx Ints are disabled then process them here */
++/* 29 June 2004 - NSP Performance Update : Moved to end at request of BCIL */
++/* 23 Aug  2004 - NSP Performance Update : If Tx Ints are re-enabled do not do Threshold check */
++
++   if(HalDev->TxIntDisable /*&& DoThresholdCheck*/)
++   {
++      if(--HalDev->TxIntThreshold[Ch] <= 0)
++      {
++          int MoreWork;
++          TxInt(HalDev, Ch, 0, &MoreWork);
++          HalDev->TxIntThreshold[Ch] = HalDev->TxIntThresholdMaster[Ch];
++      }
++   }
++    HalDev->OsFunc->CriticalOff();
++
++   return(rc);
++  }
++
++/*
++ *  This function processes receive interrupts.  It traverses the receive
++ *  buffer queue, extracting the data and passing it to the upper layer software via
++ *  osReceive().  It handles all error conditions and fragments without valid data by
++ *  immediately returning the RCB's to the RCB pool.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
++ *  @param   Ch       Channel Number.
++ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
++ *
++ *  @return  0 if OK, non-zero otherwise.
++ */
++static int RxInt(HAL_DEVICE *HalDev, int Ch, int *MoreWork)
++  {
++  HAL_RCB *CurrentRcb, *SopRcb, *EofRcb, *EopRcb;
++  bit32u RxBufStatus,PacketsServiced, RxPktLen = 0, RxSopStatus,
++    FrmFrags, TotalFrags, FrmLen;
++  int base = HalDev->dev_base, Ret;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++  int RxServiceMax = HalDev->ChData[Ch].RxServiceMax;
++  int FragIndex; /* +GSG 030508 */
++  
++  if(HalDev->NeedsCount) /* +MJH 030410 */
++    NeedsCheck(HalDev);  /* +MJH 030410 */
++
++  /* Handle case of teardown interrupt */
++  if (HalDev->RxTeardownPending[Ch] != 0)
++    {
++     Ret = RxTeardownInt(HalDev, Ch);
++     if (Ret == 0)
++       {                                                              /*+GSG 030303*/
++        *MoreWork = 0;
++        return (EC_NO_ERRORS);
++       }                                                              /*+GSG 030303*/
++    }
++
++  /* Examine first RCB on the software active queue */
++  CurrentRcb=HalDev->RxActQueueHead[Ch];
++  osfuncDataCacheHitInvalidate((void*)CurrentRcb, 16);
++  RxBufStatus=CurrentRcb->mode;
++  PacketsServiced=0;
++  
++  /* Process received packets until we find hardware owned descriptors
++     or until we hit RxServiceMax */
++  while((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)&&
++    (PacketsServiced<RxServiceMax)) /* ~GSG 030307 */
++    {
++
++     PacketsServiced++; /* ~GSG 030307 */
++     SopRcb=CurrentRcb;
++     RxSopStatus=RxBufStatus;
++     RxPktLen = RxSopStatus&CB_SIZE_MASK;
++    
++     FrmFrags=0;
++     TotalFrags=0;
++     FragIndex=0;
++     FrmLen=0;
++     EofRcb=0;
++
++/* +GSG 030508 *//* +GSG 030508 */
++
++     /* Loop through all fragments that comprise current packet.  Build
++        fraglist and exit when the end of the packet is reached, or the
++        end of the descriptor list is reached. */
++     do
++       {
++	    bit32u DmaLen;
++	   
++
++        DmaLen=CurrentRcb->Off_BLen;
++
++        FrmLen+=DmaLen;
++        TotalFrags++;
++        if (!EofRcb)
++          {
++           HalDev->fraglist[FragIndex].data=((char *)CurrentRcb->DatPtr);       /* ~GSG 030508 */
++
++           HalDev->fraglist[FragIndex].len=DmaLen;                              /* ~GSG 030508 */
++
++           /* GSG 12/9 */
++           HalDev->fraglist[FragIndex].OsInfo = CurrentRcb->OsInfo;             /* ~GSG 030508 */
++
++           /* Upper layer must do the data invalidate */ 
++
++           FrmFrags++;
++           FragIndex++;                                                         /* ~GSG 030508 */
++           if (FrmLen>=RxPktLen)
++             EofRcb=CurrentRcb;
++          }
++        EopRcb=CurrentRcb;
++        CurrentRcb=EopRcb->Next;
++        if (CurrentRcb)
++          {
++           osfuncDataCacheHitInvalidate((void*)CurrentRcb,16);
++          }
++       }while(((EopRcb->mode&CB_EOF_BIT)==0)&&(CurrentRcb));
++     
++     /* Write the completion pointer for interrupt acknowledgement*/
++     (CPMAC_RX_INT_ACK( base , Ch ))  = VirtToPhys(EopRcb) - HalDev->offset;
++
++     EopRcb->Next=0;
++
++     if (CurrentRcb == 0)
++       { 
++	    /* If we are out of RCB's we must not send this packet
++	       to the OS. */
++        int RcbSize = HalDev->ChData[Ch].RxBufSize;
++
++        if (TotalFrags>1)
++          {
++           EopRcb->Off_BLen=RcbSize;
++           EopRcb->mode=CB_OWNERSHIP_BIT;
++           osfuncDataCacheHitWritebackAndInvalidate((void *)EopRcb, 16);
++          }
++
++        SopRcb->Off_BLen=RcbSize;
++        SopRcb->mode=CB_OWNERSHIP_BIT;   
++        osfuncDataCacheHitWritebackAndInvalidate((void *)SopRcb, 16);
++      
++        ((CPMAC_RX_HDP( base , Ch )) )  = VirtToPhys(SopRcb);
++       }
++      else
++       { 
++	    /* Dequeue packet and send to OS */
++        int mode;
++
++        /* setup SopRcb for the packet */
++        SopRcb->Eop=(void*)EopRcb;
++
++        /* dequeue packet */
++        HalDev->RxActQueueHead[Ch]=CurrentRcb;
++        
++        if (EopRcb->mode&CB_EOQ_BIT)
++          {
++	       /* Next pointer is non-null and EOQ bit is set, which
++	          indicates misqueue packet in CPPI protocol. */
++
++           ((CPMAC_RX_HDP( base , Ch )) )  = EopRcb->HNext;
++          }
++        
++        mode = (SopRcb->mode & 0xFFFF0000) | Ch;
++
++        SopRcb->mode=(FrmFrags<<8)|Ch;
++        SopRcb->Off_BLen=(bit32u)HalDev;
++        
++        /* send packet up the higher layer driver */
++        OsFunc->Receive(HalDev->OsDev,HalDev->fraglist,FragIndex,RxPktLen,             /* ~GSG 030508 */
++                       (HAL_RECEIVEINFO *)SopRcb,mode);
++    
++        RxBufStatus=CurrentRcb->mode;          
++       }
++    } /* while loop */
++      
++  if ((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)) /*~GSG 030307*/
++    {
++     *MoreWork = 1;
++    }
++   else
++    {
++     *MoreWork = 0;
++    }
++
++  return (EC_NO_ERRORS);
++}
++
++/*
++ *  This function processes transmit interrupts.  It traverses the
++ *  transmit buffer queue, detecting sent data buffers and notifying the upper
++ *  layer software via osSendComplete().  (for SAR, i originally had this split
++ *  into two functions, one for each queue, but joined them on 8/8/02)
++ *
++ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
++ *  @param   Queue    Queue number to service (always 0 for MAC, Choose 1 for SAR to service low priority queue)
++ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
++ *
++ *  @return  0 if OK, non-zero otherwise.
++ */
++int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork)
++  {
++  HAL_TCB *CurrentTcb,*LastTcbProcessed,*FirstTcbProcessed;
++  int PacketsServiced;
++  bit32u TxFrameStatus;
++  int base;
++  int TxServiceMax = HalDev->ChData[Ch].TxServiceMax;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++
++/*+GSG 030303*//*+GSG 030303*/
++
++  /* load the module base address */
++  base = HalDev->dev_base;
++  
++  /* Handle case of teardown interrupt.  This must be checked at
++     the top of the function rather than the bottom, because
++     the normal data processing can wipe out the completion
++     pointer which is used to determine teardown complete. */
++  if (HalDev->TxTeardownPending[Ch] != 0)
++    {
++	 int Ret;
++	 
++     Ret = TxTeardownInt(HalDev, Ch, Queue);
++     if (Ret == 0)
++       {                                                              /*+GSG 030303*/
++        *MoreWork = 0; /* bug fix 1/6 */                              /*+GSG 030303*/
++        return (EC_NO_ERRORS);
++       }                                                              /*+GSG 030303*/
++    }
++
++  OsFunc->CriticalOn(); /*  240904 */
++
++  CurrentTcb = HalDev->TxActQueueHead[Ch][Queue];
++  FirstTcbProcessed=CurrentTcb;
++
++  if (CurrentTcb==0)
++    {
++     /* I saw this error a couple of times when multi-channels were added */
++     dbgPrintf("[cppi TxInt()]TxH int with no TCB in queue!\n");
++     dbgPrintf("              Ch=%d, CurrentTcb = 0x%08x\n", Ch, (bit32u)CurrentTcb);
++     dbgPrintf("              HalDev = 0x%08x\n", (bit32u)HalDev);
++     osfuncSioFlush();
++     OsFunc->CriticalOff(); 
++     return(EC_CPPI|EC_FUNC_TXINT|EC_VAL_NULL_TCB);
++    }
++
++  osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
++  TxFrameStatus=CurrentTcb->mode;
++  PacketsServiced=0;
++
++  /* should the ownership bit check be inside of the loop?? could make it a
++     while-do loop and take this check away */
++  if ((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
++    {
++    do
++      {
++      /* Pop TCB(s) for packet from the stack */
++      LastTcbProcessed=CurrentTcb->Eop;
++
++      /* new location for acknowledge */
++      /* Write the completion pointer */
++      (CPMAC_TX_INT_ACK( base , Ch ))  = VirtToPhys(LastTcbProcessed) - HalDev->offset;
++
++      HalDev->TxActQueueHead[Ch][Queue] = LastTcbProcessed->Next;
++
++/*+GSG 030303*//*+GSG 030303*/
++
++      osfuncDataCacheHitInvalidate((void *)LastTcbProcessed, 16);
++
++      if (LastTcbProcessed->mode&CB_EOQ_BIT)
++        {
++         if (LastTcbProcessed->Next)
++           {
++            /* Misqueued packet */
++
++               (CPMAC_TX_HDP( base , Ch ))  = LastTcbProcessed->HNext;
++
++           }
++          else
++           {
++       /* Tx End of Queue */
++
++            HalDev->TxActive[Ch][Queue]=FALSE;
++           }
++        }
++
++      OsFunc->SendComplete(CurrentTcb->OsInfo);
++
++      /* Push Tcb(s) back onto the stack */
++      CurrentTcb = LastTcbProcessed->Next;
++
++      LastTcbProcessed->Next=HalDev->TcbPool[Ch][Queue];
++
++      HalDev->TcbPool[Ch][Queue]=FirstTcbProcessed;
++
++      PacketsServiced++;
++
++      TxFrameStatus=CB_OWNERSHIP_BIT;
++      /* set the first(SOP) pointer for the next packet */
++      FirstTcbProcessed = CurrentTcb;
++      if (CurrentTcb)
++        {
++         osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
++         TxFrameStatus=CurrentTcb->mode;
++        }
++
++      }while(((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
++             &&(PacketsServiced<TxServiceMax));
++
++    if (((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
++             &&(PacketsServiced==TxServiceMax))
++      {
++       *MoreWork = 1;
++      }
++     else
++      {
++       *MoreWork = 0;
++      }
++    }
++    OsFunc->CriticalOff(); 
++
++  return(EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function performs a teardown for the given channel.  The value of the
++ *  Mode parameter controls the operation of the function, as documented below.
++ *
++ *  Note: If bit 3 of Mode is set, this call is blocking, and will not return
++ *  until the teardown interrupt has occurred and been processed. While waiting
++ *  for a blocking teardown to complete, ChannelTeardown() will signal the OS
++ *  (via Control(.."Sleep"..)) to allow the OS to perform other tasks if
++ *  necessary.  If and only if bit 3 of Mode is clear, the CPHAL will call the
++ *  OS TeardownComplete() function to indicate that the teardown has completed.
++ *
++ *  @param   HalDev  CPHAL module instance. (set by xxxInitModule())
++ *  @param   Ch      Channel number.
++ *  @param   Mode    Bit 0 (LSB): Perform Tx teardown (if set).<BR>
++ *                   Bit 1: Perform Rx teardown (if set). <BR>
++ *                   Bit 2: If set, perform full teardown (free buffers/descriptors).
++ *                          If clear, perform partial teardown (keep buffers). <BR>
++ *                   Bit 3 (MSB): If set, call is blocking.
++ *                            If clear, call is non-blocking.
++ *
++ *  @return  EC_NO_ERRORS (ok). <BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
++ *           @ref EC_VAL_TX_TEARDOWN_ALREADY_PEND "EC_VAL_TX_TEARDOWN_ALREADY_PEND"<BR>
++ *           @ref EC_VAL_RX_TEARDOWN_ALREADY_PEND "EC_VAL_RX_TEARDOWN_ALREADY_PEND"<BR>
++ *           @ref EC_VAL_TX_CH_ALREADY_TORNDOWN "EC_VAL_TX_CH_ALREADY_TORNDOWN"<BR>
++ *           @ref EC_VAL_RX_CH_ALREADY_TORNDOWN "EC_VAL_RX_CH_ALREADY_TORNDOWN"<BR>
++ *           @ref EC_VAL_TX_TEARDOWN_TIMEOUT "EC_VAL_TX_TEARDOWN_TIMEOUT"<BR>
++ *           @ref EC_VAL_RX_TEARDOWN_TIMEOUT "EC_VAL_RX_TEARDOWN_TIMEOUT"<BR>
++ *           @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
++ */
++static int halChannelTeardown(HAL_DEVICE *HalDev, int Ch, bit32 Mode)
++  {
++   int DoTx, DoRx, Sleep=2048, timeout=0;                         /*MJH~030306*/
++   bit32u base = HalDev->dev_base;
++
++/* Set the module, used for error returns */
++
++   DoTx = (Mode & TX_TEARDOWN);
++   DoRx = (Mode & RX_TEARDOWN);
++
++   if (HalDev->State < enInitialized)
++     return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_STATE);
++
++   if ((Ch < 0) || (Ch > (MAX_CHAN-1) ))
++     {
++     return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
++     }
++
++   /* set teardown pending bits before performing the teardown, because they
++      will be used in the int handler (this is done for AAL5) */
++   if (DoTx)
++     {
++      if (HalDev->TxTeardownPending[Ch] != 0)
++        return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_ALREADY_PEND);
++
++      /* If a full teardown, this also means that the user must
++      setup all channels again to use them */
++      if (Mode & FULL_TEARDOWN)
++        HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
++
++      if (HalDev->State < enOpened)
++        {
++         /* if the hardware has never been opened, the channel has never actually
++         been setup in the hardware, so I just need to reset the software flag
++         and leave */
++         HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
++         return (EC_NO_ERRORS);
++    }
++       else
++    {
++         if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)
++       {
++            return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_CH_ALREADY_TORNDOWN);
++       }
++
++         /* set teardown flag */
++         HalDev->TxTeardownPending[Ch] = Mode;
++    }
++     }
++
++   if (DoRx)
++     {
++      if (HalDev->RxTeardownPending[Ch] != 0)
++        return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_ALREADY_PEND);
++
++      if (Mode & FULL_TEARDOWN)
++        HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
++
++      if (HalDev->State < enOpened)
++        {
++         HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
++         return (EC_NO_ERRORS);
++    }
++       else
++    {
++         if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == 0)
++           return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_CH_ALREADY_TORNDOWN);
++
++         HalDev->RxTeardownPending[Ch] = Mode;
++    }
++     }
++
++   /* Perform Tx Teardown Duties */
++   if ((DoTx) && (HalDev->State == enOpened))
++     {
++      /* Request TX channel teardown */
++      (CPMAC_TX_TEARDOWN( base ))  = Ch;
++
++      /* wait until teardown has completed */
++      if (Mode & BLOCKING_TEARDOWN)
++        {
++     timeout = 0;
++         while (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
++       {
++            osfuncSleep(&Sleep);
++
++            timeout++;
++        if (timeout > 100000)
++          {
++               return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_TIMEOUT);
++          }
++       }
++    }
++     } /* if DoTx */
++
++   /* Perform Rx Teardown Duties */
++   if ((DoRx) && (HalDev->State == enOpened))
++     {
++
++      /* perform CPMAC specific RX channel teardown */
++      CPMAC_RX_TEARDOWN(base) = Ch;
++
++      if (Mode & BLOCKING_TEARDOWN)
++        {
++     timeout = 0;
++         while (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
++       {
++            osfuncSleep(&Sleep);
++
++            timeout++;
++        if (timeout > 100000)
++          {
++               return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_TIMEOUT);
++          }
++       }
++        }
++     } /* if DoRx */
++
++   return (EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function closes the CPHAL module.  The module will be reset.
++ *  The Mode parameter should be used to determine the actions taken by
++ *  Close().
++ *
++ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
++ *  @param   Mode     Indicates actions to take on close.  The following integer
++ *                    values are valid: <BR>
++ *                    1:  Does not free buffer resources, init parameters remain
++ *                        intact.  User can then call Open() without calling Init()
++ *                        to attempt to reset the device and bring it back to the
++ *                        last known state.<BR>
++ *                    2:  Frees the buffer resources, but keeps init parameters.  This
++ *                        option is a more aggressive means of attempting a device reset.
++ *                    3:  Frees the buffer resources, and clears all init parameters. <BR>
++ *                        At this point, the caller would have to call to completely
++ *                        reinitialize the device (Init()) before being able to call
++ *                        Open().  Use this mode if you are shutting down the module
++ *                        and do not plan to restart.
++ *
++ *  @return  EC_NO_ERRORS (ok).<BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           Any error code from halChannelTeardown().<BR>
++ */
++static int halClose(HAL_DEVICE *HalDev, bit32 Mode)
++  {
++   int Ch, Inst, Ret;
++   OS_DEVICE *TmpOsDev;
++   OS_FUNCTIONS *TmpOsFunc;
++   HAL_FUNCTIONS *TmpHalFunc;
++   char *TmpDeviceInfo;
++
++   int Ticks;                                                     /*MJH~030306*/
++
++   /* Verify proper device state */
++   if (HalDev->State != enOpened)
++     return (EC_CPMAC  | EC_FUNC_CLOSE|EC_VAL_INVALID_STATE);
++
++   /* Teardown all open channels */
++   for (Ch = 0; Ch <= (MAX_CHAN-1) ; Ch++)
++     {
++      if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
++        {
++         if (Mode == 1)
++           {
++            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
++            if (Ret) return (Ret);
++           }
++          else
++           {
++            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
++            if (Ret) return (Ret);
++           }
++        }
++
++      if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
++        {
++         if (Mode == 1)
++           {
++            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
++            if (Ret) return (Ret);
++           }
++          else
++           {
++            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
++            if (Ret) return (Ret);
++           }
++        }
++     }
++
++   /* free fraglist in HalDev */
++   HalDev->OsFunc->Free(HalDev->fraglist);
++   HalDev->fraglist = 0;
++
++   /* unregister the interrupt */
++   HalDev->OsFunc->IsrUnRegister(HalDev->OsDev, HalDev->interrupt);
++
++   Ticks = 0;    /* Disable Tick Timer */                           /*MJH+030306*/
++   HalDev->OsFunc->Control(HalDev->OsDev, hcTick, hcClear, &Ticks); /*MJH+030306*/
++
++   /* Free the Phy Information Structure */
++   if(HalDev->PhyDev)
++   {
++      HalDev->OsFunc->Free(HalDev->PhyDev);                               /*MJH+030513*/
++      HalDev->PhyDev = 0;                                         /*MJH+030522*/
++   }
++
++   /* Perform CPMAC specific closing functions */
++   CPMAC_MACCONTROL(HalDev->dev_base) &= ~MII_EN;
++   CPMAC_TX_CONTROL(HalDev->dev_base) &= ~TX_EN;
++   CPMAC_RX_CONTROL(HalDev->dev_base) &= ~RX_EN;
++
++   /* put device back into reset */
++   (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit);
++   Ticks = 64;                                                    /*MJH~030306*/
++   osfuncSleep(&Ticks);
++
++   /* If mode is 3, than clear the HalDev and set next state to DevFound*/
++   if (Mode == 3)
++     {
++      /* I need to keep the HalDev parameters that were setup in InitModule */
++      TmpOsDev = HalDev->OsDev;
++      TmpOsFunc = HalDev->OsFunc;
++      TmpDeviceInfo = HalDev->DeviceInfo;
++
++      TmpHalFunc = HalDev->HalFuncPtr;
++      Inst = HalDev->Inst;
++
++      /* Clear HalDev */
++
++      HalDev->OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
++
++      /* Restore key parameters */
++      HalDev->OsDev = TmpOsDev;
++      HalDev->OsFunc = TmpOsFunc;
++      HalDev->DeviceInfo = TmpDeviceInfo;
++
++      HalDev->HalFuncPtr = TmpHalFunc;
++      HalDev->Inst = Inst;
++
++      HalDev->State = enDevFound;
++     }
++    else
++     {
++      HalDev->State = enInitialized;
++     }
++
++   return(EC_NO_ERRORS);
++  }
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpremap_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpremap_cpmac.c
+--- linux.old/drivers/net/avalanche_cpmac/cpremap_cpmac.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpremap_cpmac.c	2005-07-12 02:48:42.049593000 +0200
+@@ -0,0 +1,28 @@
++#ifndef _INC_CPREMAP_C
++#define _INC_CPREMAP_C
++
++#ifdef __ADAM2
++static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
++  {
++  asm(" cache  17, (%0)" : : "r" (ptr));
++  }
++
++static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
++  { 
++  asm(" cache  25, (%0)" : : "r" (ptr));
++  }
++  
++static inline void osfuncDataCacheHitWritebackAndInvalidate(void *ptr, int Size)
++  { 
++  asm(" cache  21, (%0)" : : "r" (ptr));
++  }
++
++#else
++
++#define osfuncDataCacheHitInvalidate(MemPtr, Size)               __asm__(" .set mips3; cache  17, (%0); .set mips0" : : "r" (MemPtr))
++#define osfuncDataCacheHitWritebackAndInvalidate(MemPtr, Size)   __asm__(" .set mips3; cache  21, (%0); .set mips0" : : "r" (MemPtr))
++#define osfuncDataCacheHitWriteback(MemPtr, Size)                __asm__(" .set mips3; cache  25, (%0); .set mips0" : : "r" (MemPtr))      
++            
++#endif
++
++#endif
+diff -urN linux.old/drivers/net/avalanche_cpmac/cpswhal_cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpswhal_cpmac.h
+--- linux.old/drivers/net/avalanche_cpmac/cpswhal_cpmac.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/cpswhal_cpmac.h	2005-07-12 02:48:42.050593000 +0200
+@@ -0,0 +1,632 @@
++/************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE: cphal.h
++ *
++ *  DESCRIPTION:
++ *      User include file, contains data definitions shared between the CPHAL
++ *      and the upper-layer software.
++ *
++ *  HISTORY:
++ *      Date      Modifier  Ver    Notes
++ *      28Feb02   Greg      1.00   Original
++ *      06Mar02   Greg      1.01   Documentation enhanced
++ *      18Jul02   Greg      1.02   Many updates (OAM additions, general reorg)
++ *      22Nov02   Mick      RC2    Additions from Denis' input on Control
++ *
++ *  author  Greg Guyotte
++ *  version 1.02
++ *  date    18-Jul-2002
++ *****************************************************************************/
++#ifndef _INC_CPHAL_H
++#define _INC_CPHAL_H
++
++#ifdef _CPHAL_CPMAC
++#include "ec_errors_cpmac.h"
++#endif
++
++#ifdef _CPHAL_AAL5
++#include "ec_errors_cpaal5.h"
++#endif
++
++#ifdef _CPHAL_CPSAR
++#include "ec_errors_cpsar.h"
++#endif
++
++#ifdef _CPHAL_AAL2
++#include "ec_errors_cpaal2.h"
++#endif
++
++#ifndef __ADAM2
++typedef char           bit8;
++typedef short          bit16;
++typedef int            bit32;
++
++typedef unsigned char  bit8u;
++typedef unsigned short bit16u;
++typedef unsigned int   bit32u;
++
++/*
++typedef char           INT8;
++typedef short          INT16;
++typedef int            INT32;
++typedef unsigned char  UINT8;
++typedef unsigned short UINT16;
++typedef unsigned int   UINT32;
++*/
++/*typedef unsigned int   size_t;*/
++#endif
++
++#ifdef _CPHAL
++
++#ifndef TRUE
++#define TRUE (1==1)
++#endif
++
++#ifndef FALSE
++#define FALSE (1==2)
++#endif
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#endif
++
++#define        VirtToPhys(a)                 (((int)a)&~0xe0000000)
++#define        VirtToVirtNoCache(a)          ((void*)((VirtToPhys(a))|0xa0000000))
++#define        VirtToVirtCache(a)            ((void*)((VirtToPhys(a))|0x80000000))
++#define        PhysToVirtNoCache(a)          ((void*)(((int)a)|0xa0000000))
++#define        PhysToVirtCache(a)            ((void*)(((int)a)|0x80000000))
++/*
++#define        DataCacheHitInvalidate(a)     {__asm__(" cache  17, (%0)" :   : "r" (a));}
++#define        DataCacheHitWriteback(a)      {__asm__(" cache  25, (%0)" :   : "r" (a));}
++*/
++
++#define PARTIAL 1     /**< Used in @c Close() and @c ChannelTeardown() */
++#define FULL 2        /**< Used in @c Close() and @c ChannelTeardown() */
++
++/* Channel Teardown Defines */
++#define RX_TEARDOWN 2
++#define TX_TEARDOWN 1
++#define BLOCKING_TEARDOWN 8
++#define FULL_TEARDOWN 4
++#define PARTIAL_TEARDOWN 0
++
++#define MAX_DIR 2
++#define DIRECTION_TX 0
++#define DIRECTION_RX 1
++#define TX_CH 0
++#define RX_CH 1
++#define HAL_ERROR_DEVICE_NOT_FOUND    1
++#define HAL_ERROR_FAILED_MALLOC       2
++#define HAL_ERROR_OSFUNC_SIZE         3
++#define HAL_DEFAULT  0xFFFFFFFF
++#define VALID(val)    (val!=HAL_DEFAULT)
++
++/*
++ERROR REPORTING
++
++HAL Module Codes.  Each HAL module reporting an error code
++should OR the error code with the respective Module error code
++from the list below.
++*/
++#define EC_AAL5                                EC_HAL|EC_DEV_AAL5
++#define EC_AAL2                                EC_HAL|EC_DEV_AAL2
++#define EC_CPSAR                               EC_HAL|EC_DEV_CPSAR
++#define EC_CPMAC                               EC_HAL|EC_DEV_CPMAC
++#define EC_VDMA                                EC_HAL|EC_DEV_VDMA
++#define EC_VLYNQ                               EC_HAL|EC_DEV_VLYNQ
++#define EC_CPPI                                EC_HAL|EC_DEV_CPPI
++
++/*
++HAL Function Codes.  Each HAL module reporting an error code
++should OR the error code with one of the function codes from
++the list below.
++*/
++#define EC_FUNC_HAL_INIT                       EC_FUNC(1)
++#define EC_FUNC_CHSETUP                        EC_FUNC(2)
++#define EC_FUNC_CHTEARDOWN                     EC_FUNC(3)
++#define EC_FUNC_RXRETURN                       EC_FUNC(4)
++#define EC_FUNC_SEND                           EC_FUNC(5)
++#define EC_FUNC_RXINT                          EC_FUNC(6)
++#define EC_FUNC_TXINT                          EC_FUNC(7)
++#define EC_FUNC_AAL2_VDMA                      EC_FUNC(8)
++#define EC_FUNC_OPTIONS                        EC_FUNC(9)
++#define EC_FUNC_PROBE                          EC_FUNC(10)
++#define EC_FUNC_OPEN                           EC_FUNC(11)
++#define EC_FUNC_CONTROL                        EC_FUNC(12)
++#define EC_FUNC_DEVICE_INT                     EC_FUNC(13)
++#define EC_FUNC_STATUS                         EC_FUNC(14)
++#define EC_FUNC_TICK                           EC_FUNC(15)
++#define EC_FUNC_CLOSE                          EC_FUNC(16)
++#define EC_FUNC_SHUTDOWN                       EC_FUNC(17)
++#define EC_FUNC_DEVICE_INT_ALT                 EC_FUNC(18) /* +GSG 030306 */
++
++/*
++HAL Error Codes.  The list below defines every type of error
++used in all HAL modules. DO NOT CHANGE THESE VALUES!  Add new
++values in integer order to the bottom of the list.
++*/
++#define EC_VAL_PDSP_LOAD_FAIL                 EC_ERR(0x01)|EC_CRITICAL
++#define EC_VAL_FIRMWARE_TOO_LARGE             EC_ERR(0x02)|EC_CRITICAL
++#define EC_VAL_DEVICE_NOT_FOUND               EC_ERR(0x03)|EC_CRITICAL
++#define EC_VAL_BASE_ADDR_NOT_FOUND            EC_ERR(0x04)|EC_CRITICAL
++#define EC_VAL_RESET_BIT_NOT_FOUND            EC_ERR(0x05)|EC_CRITICAL
++#define EC_VAL_CH_INFO_NOT_FOUND              EC_ERR(0x06)
++#define EC_VAL_RX_STATE_RAM_NOT_CLEARED       EC_ERR(0x07)|EC_CRITICAL
++#define EC_VAL_TX_STATE_RAM_NOT_CLEARED       EC_ERR(0x08)|EC_CRITICAL
++#define EC_VAL_MALLOC_DEV_FAILED              EC_ERR(0x09)
++#define EC_VAL_OS_VERSION_NOT_SUPPORTED       EC_ERR(0x0A)|EC_CRITICAL
++#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED    EC_ERR(0x0B)|EC_CRITICAL
++#define EC_VAL_NULL_CPSAR_DEV                 EC_ERR(0x0C)|EC_CRITICAL
++
++#define EC_VAL_LUT_NOT_READY                  EC_ERR(0x0D)
++#define EC_VAL_INVALID_CH                     EC_ERR(0x0E)
++#define EC_VAL_NULL_CH_STRUCT                 EC_ERR(0x0F)
++#define EC_VAL_RX_TEARDOWN_ALREADY_PEND       EC_ERR(0x10)
++#define EC_VAL_TX_TEARDOWN_ALREADY_PEND       EC_ERR(0x11)
++#define EC_VAL_RX_CH_ALREADY_TORNDOWN         EC_ERR(0x12)
++#define EC_VAL_TX_CH_ALREADY_TORNDOWN         EC_ERR(0x13)
++#define EC_VAL_TX_TEARDOWN_TIMEOUT            EC_ERR(0x14)
++#define EC_VAL_RX_TEARDOWN_TIMEOUT            EC_ERR(0x15)
++#define EC_VAL_CH_ALREADY_TORNDOWN            EC_ERR(0x16)
++#define EC_VAL_VC_SETUP_NOT_READY             EC_ERR(0x17)
++#define EC_VAL_VC_TEARDOWN_NOT_READY          EC_ERR(0x18)
++#define EC_VAL_INVALID_VC                     EC_ERR(0x19)
++#define EC_VAL_INVALID_LC                     EC_ERR(0x20)
++#define EC_VAL_INVALID_VDMA_CH                EC_ERR(0x21)
++#define EC_VAL_INVALID_CID                    EC_ERR(0x22)
++#define EC_VAL_INVALID_UUI                    EC_ERR(0x23)
++#define EC_VAL_INVALID_UUI_DISCARD            EC_ERR(0x24)
++#define EC_VAL_CH_ALREADY_OPEN                EC_ERR(0x25)
++
++#define EC_VAL_RCB_MALLOC_FAILED              EC_ERR(0x26)
++#define EC_VAL_RX_BUFFER_MALLOC_FAILED        EC_ERR(0x27)
++#define EC_VAL_OUT_OF_TCBS                    EC_ERR(0x28)
++#define EC_VAL_NO_TCBS                        EC_ERR(0x29)
++#define EC_VAL_NULL_RCB                       EC_ERR(0x30)|EC_CRITICAL
++#define EC_VAL_SOP_ERROR                      EC_ERR(0x31)|EC_CRITICAL
++#define EC_VAL_EOP_ERROR                      EC_ERR(0x32)|EC_CRITICAL
++#define EC_VAL_NULL_TCB                       EC_ERR(0x33)|EC_CRITICAL
++#define EC_VAL_CORRUPT_RCB_CHAIN              EC_ERR(0x34)|EC_CRITICAL
++#define EC_VAL_TCB_MALLOC_FAILED              EC_ERR(0x35)
++
++#define EC_VAL_DISABLE_POLLING_FAILED         EC_ERR(0x36)
++#define EC_VAL_KEY_NOT_FOUND                  EC_ERR(0x37)
++#define EC_VAL_MALLOC_FAILED                  EC_ERR(0x38)
++#define EC_VAL_RESET_BASE_NOT_FOUND           EC_ERR(0x39)|EC_CRITICAL
++#define EC_VAL_INVALID_STATE                  EC_ERR(0x40)
++#define EC_VAL_NO_TXH_WORK_TO_DO              EC_ERR(0x41)
++#define EC_VAL_NO_TXL_WORK_TO_DO              EC_ERR(0x42)
++#define EC_VAL_NO_RX_WORK_TO_DO               EC_ERR(0x43)
++#define EC_VAL_NOT_LINKED                     EC_ERR(0x44)
++#define EC_VAL_INTERRUPT_NOT_FOUND            EC_ERR(0x45)
++#define EC_VAL_OFFSET_NOT_FOUND               EC_ERR(0x46)
++#define EC_VAL_MODULE_ALREADY_CLOSED          EC_ERR(0x47)
++#define EC_VAL_MODULE_ALREADY_SHUTDOWN        EC_ERR(0x48)
++#define EC_VAL_ACTION_NOT_FOUND               EC_ERR(0x49)
++#define EC_VAL_RX_CH_ALREADY_SETUP            EC_ERR(0x50)
++#define EC_VAL_TX_CH_ALREADY_SETUP            EC_ERR(0x51)
++#define EC_VAL_RX_CH_ALREADY_OPEN             EC_ERR(0x52)
++#define EC_VAL_TX_CH_ALREADY_OPEN             EC_ERR(0x53)
++#define EC_VAL_CH_ALREADY_SETUP               EC_ERR(0x54)
++#define EC_VAL_RCB_NEEDS_BUFFER               EC_ERR(0x55) /* +GSG 030410 */
++#define EC_VAL_RCB_DROPPED                    EC_ERR(0x56) /* +GSG 030410 */
++#define EC_VAL_INVALID_VALUE                  EC_ERR(0x57)
++
++/**
++@defgroup shared_data Shared Data Structures
++
++The data structures documented here are shared by all modules.
++*/
++
++/**
++ *  @ingroup shared_data
++ *  This is the fragment list structure.  Each fragment list entry contains a
++ *  length and a data buffer.
++ */
++typedef struct
++  {
++   bit32u   len;    /**< Length of the fragment in bytes (lower 16 bits are valid).  For SOP, upper 16 bits is the buffer offset. */
++   void     *data;  /**< Pointer to fragment data. */
++   void     *OsInfo; /**< Pointer to OS defined data. */
++  }FRAGLIST;
++
++#if defined (_CPHAL_CPMAC)
++#define CB_PASSCRC_BIT     (1<<26)
++
++/* CPMAC CPHAL STATUS */
++#define CPMAC_STATUS_LINK               (1 << 0)
++#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  /* 0 - HD, 1 - FD */
++#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  /* 0 - 10, 1 - 100 */
++
++/*   ADAPTER CHECK Codes */
++
++#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
++#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)
++#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)
++#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13)
++
++#define _CPMDIO_DISABLE                 (1 << 0)
++#define _CPMDIO_HD                      (1 << 1)
++#define _CPMDIO_FD                      (1 << 2)
++#define _CPMDIO_10                      (1 << 3)
++#define _CPMDIO_100                     (1 << 4)
++#define _CPMDIO_NEG_OFF                 (1 << 5)
++#define _CPMDIO_LOOPBK                  (1 << 16)
++#define _CPMDIO_AUTOMDIX                (1 << 17)   /* Bit 16 and above not used by MII register */
++#define _CPMDIO_NOPHY                   (1 << 20)
++#endif
++
++/**
++ *  @ingroup shared_data
++ *  Channel specific configuration information.  This structure should be
++ *  populated by upper-layer software prior to calling @c ChannelSetup().  Any
++ *  configuration item that can be changed on a per channel basis should
++ *  be represented here.  Each module may define this structure with additional
++ *  module-specific members.
++ */
++typedef struct
++  {
++   int Channel;        /**< Channel number. */
++   int Direction;      /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
++   OS_SETUP *OsSetup;  /**< OS defined information associated with this channel. */
++
++#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
++   int RxBufSize;      /**< Size (in bytes) for each Rx buffer.*/
++   int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
++   int RxNumBuffers;   /**< The number of Rx buffer descriptors to allocate for Ch. */
++   int RxServiceMax;   /**< Maximum number of packets to service at one time. */
++
++   int TxNumBuffers;   /**< The number of Tx buffer descriptors to allocate for Ch. */
++   int TxNumQueues;    /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
++   int TxServiceMax;   /**< Maximum number of packets to service at one time. */
++#endif
++
++#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++   int CpcsUU;      /**< The 2-byte CPCS UU and CPI information. */
++   int Gfc;         /**< Generic Flow Control. */
++   int Clp;         /**< Cell Loss Priority. */
++   int Pti;         /**< Payload Type Indication. */
++#endif
++
++#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++   int DaMask;      /**< Specifies whether credit issuance is paused when Tx data not available. */
++   int Priority;    /**< Priority bin this channel will be scheduled within. */
++   int PktType;     /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
++   int Vci;         /**< Virtual Channel Identifier. */
++   int Vpi;         /**< Virtual Path Identifier. */
++   int FwdUnkVc;    /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
++
++   /* Tx VC State */
++   int TxVc_CellRate;  /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
++   int TxVc_QosType;   /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
++   int TxVc_Mbs;       /**< Min Burst Size in cells.*/
++   int TxVc_Pcr;       /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
++
++   bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
++   int TxVc_OamTc;     /**< TC Path to transmit OAM cells for TX connection (0,1). */
++   int TxVc_VpOffset;  /**< Offset to the OAM VP state table. */
++   /* Rx VC State */
++   int RxVc_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
++   int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
++   bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
++   int RxVc_OamTc;     /**< TC Path to transmit OAM cells for RX connection (0,1). */
++   int RxVc_VpOffset;  /**< Offset to the OAM VP state table. */
++   /* Tx VP State */
++   int TxVp_OamTc;     /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
++   bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
++   /* Rx VP State  */
++   int RxVp_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
++   int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
++   bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
++   int RxVp_OamTc;     /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
++   int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
++#endif
++
++
++#ifdef _CPHAL_VDMAVT
++   bit32u RemFifoAddr; /* Mirror mode only. */
++   bit32u FifoAddr;
++   bit32  PollInt;
++   bit32  FifoSize;
++   int    Ready;
++#endif
++
++  }CHANNEL_INFO;
++
++/*
++ *  This structure contains each statistic value gathered by the CPHAL.
++ *  Applications may access statistics data by using the @c StatsGet() routine.
++ */
++/* STATS */
++#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++typedef struct
++  {
++   bit32u CrcErrors[16];
++   bit32u LenErrors[16];
++   bit32u DmaLenErrors[16];
++   bit32u AbortErrors[16];
++   bit32u StarvErrors[16];
++   bit32u TxMisQCnt[16][2];
++   bit32u RxMisQCnt[16];
++   bit32u RxEOQCnt[16];
++   bit32u TxEOQCnt[16][2];
++   bit32u RxPacketsServiced[16];
++   bit32u TxPacketsServiced[16][2];
++   bit32u RxMaxServiced;
++   bit32u TxMaxServiced[16][2];
++   bit32u RxTotal;
++   bit32u TxTotal;
++  } STAT_INFO;
++#endif
++
++/*
++ *  VDMA Channel specific configuration information
++ */
++#ifdef _CPHAL_AAL2
++typedef struct
++  {
++   int Ch;           /**< Channel Number */
++   int RemoteEndian; /**< Endianness of remote VDMA-VT device */
++   int CpsSwap;      /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device.  When 1, in MS byte. */
++  }VdmaChInfo;
++#endif
++
++#ifndef _CPHAL
++  typedef void HAL_DEVICE;
++  typedef void HAL_PRIVATE;
++  typedef void HAL_RCB;
++  typedef void HAL_RECEIVEINFO;
++#endif
++
++/**
++ *  @ingroup shared_data
++ *  The HAL_FUNCTIONS struct defines the function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to xxxInitModule().
++ */
++typedef struct
++  {
++  int  (*ChannelSetup)    (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
++  int  (*Close)           (HAL_DEVICE *HalDev, int Mode);
++  int  (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
++  int  (*Init)            (HAL_DEVICE *HalDev);
++  int  (*Open)            (HAL_DEVICE *HalDev);
++  int  (*PacketProcessEnd) (HAL_DEVICE *HalDev);
++  int  (*Probe)           (HAL_DEVICE *HalDev);
++  int  (*RxReturn)        (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
++  int  (*Send)            (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
++  int  (*Shutdown)        (HAL_DEVICE *HalDev);
++  int  (*Tick)            (HAL_DEVICE *HalDev);
++
++#ifdef _CPHAL_AAL5
++  int  (*Kick) (HAL_DEVICE *HalDev, int Queue);
++  void (*OamFuncConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig);
++  void (*OamLoopbackConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  STAT_INFO*  (*StatsGetOld)(HAL_DEVICE *HalDev);
++#endif
++  } HAL_FUNCTIONS;
++
++/**
++ *  @ingroup shared_data
++ *  The OS_FUNCTIONS struct defines the function pointers for all upper layer
++ *  functions accessible to the CPHAL.  The upper layer software is responsible
++ *  for providing the correct OS-specific implementations for the following
++ *  functions. It is populated by calling InitModule() (done by the CPHAL in
++ *  xxxInitModule().
++ */
++typedef struct
++  {
++  int   (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
++  void  (*CriticalOn)(void);
++  void  (*CriticalOff)(void);
++  void  (*DataCacheHitInvalidate)(void *MemPtr, int Size);
++  void  (*DataCacheHitWriteback)(void *MemPtr, int Size);
++  int   (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
++  int   (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
++  int   (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
++  void  (*Free)(void *MemPtr);
++  void  (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
++  void  (*FreeDev)(void *MemPtr);
++  void  (*FreeDmaXfer)(void *MemPtr);
++  void  (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
++  void  (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
++  void* (*Malloc)(bit32u size);
++  void* (*MallocDev)(bit32u Size);
++  void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
++  void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
++                       OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
++                       OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
++  void* (*Memset)(void *Dest, int C, bit32u N);
++  int   (*Printf)(const char *Format, ...);
++  int   (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
++                 bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
++  int   (*SendComplete)(OS_SENDINFO *OsSendInfo);
++  int   (*Sprintf)(char *S, const char *Format, ...);
++  int   (*Strcmpi)(const char *Str1, const char *Str2);
++  unsigned int (*Strlen)(const char *S);
++  char* (*Strstr)(const char *S1, const char *S2);
++  unsigned long  (*Strtoul)(const char *Str, char **Endptr, int Base);
++  void  (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
++  } OS_FUNCTIONS;
++
++/************** MODULE SPECIFIC STUFF BELOW **************/
++
++#ifdef _CPHAL_CPMAC
++
++/*
++int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
++*/
++
++int halCpmacInitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 HAL_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_AAL5
++/*
++ *  @ingroup shared_data
++ *  The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to cphalInitModule().
++ */
++/*
++typedef struct
++  {
++  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
++  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
++  int  (*Init)(HAL_DEVICE *HalDev);
++  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
++  int  (*Open)(HAL_DEVICE *HalDev);
++  int  (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
++  int  (*Probe)(HAL_DEVICE *HalDev);
++  int  (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
++  int  (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
++                 int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
++                 bit32u Mode);
++  int  (*StatsClear)(HAL_DEVICE *HalDev);
++  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
++  int  (*Status)(HAL_DEVICE *HalDev);
++  void (*Tick)(HAL_DEVICE *HalDev);
++  int  (*Kick)(HAL_DEVICE *HalDev, int Queue);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  } AAL5_FUNCTIONS;
++*/
++
++int cpaal5InitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 HAL_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_AAL2
++/**
++ *  @ingroup shared_data
++ *  The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to cphalInitModule().
++ */
++typedef struct
++  {
++  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
++  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
++  int  (*Init)(HAL_DEVICE *HalDev);
++  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
++  int  (*Open)(HAL_DEVICE *HalDev);
++  int  (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
++  int  (*Probe)(HAL_DEVICE *HalDev);
++
++  int  (*StatsClear)(HAL_DEVICE *HalDev);
++  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
++  int  (*Status)(HAL_DEVICE *HalDev);
++  void (*Tick)(HAL_DEVICE *HalDev);
++  int  (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
++                                    int VdmaCh, int UUIDiscard);
++  int  (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
++                                   int LC);
++  int  (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
++  int  (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
++                               VdmaChInfo *VdmaCh);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  int  (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
++                           int RxMultiMode, int TxMultiMode, int SchedMode,
++                           int TcCh);
++  void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
++  int  (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
++  } AAL2_FUNCTIONS;
++
++int cpaal2InitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 AAL2_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_VDMAVT
++/**
++ *  @ingroup shared_data
++ *  The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to InitModule().
++ *
++ *  Note that this list is still under definition.
++ */
++typedef struct
++  {
++  bit32  (*Init)( HAL_DEVICE *VdmaVtDev);
++    /*  bit32  (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
++                  bit32u Addr, bit32u Size, bit32u PollInt);
++    bit32  (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
++                  bit32u Addr, bit32u Size, bit32u PollInt); */
++  bit32  (*Tx)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Rx)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
++                         bit32u RemDevID);
++  bit32  (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Open)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Close)(HAL_DEVICE *VdmaVtDev);
++  int    (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
++  int    (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int    (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
++  int    (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
++                 int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
++  } VDMA_FUNCTIONS;
++
++int VdmaInitModule(HAL_DEVICE **VdmaVt,
++                 OS_DEVICE *OsDev,
++                 VDMA_FUNCTIONS **VdmaVtFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++/*
++extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
++                      int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
++                      int *Size, int Inst);
++*/
++
++
++#ifdef _CPHAL_AAL5
++extern const char hcSarFrequency[];
++#endif
++
++#ifdef _CPHAL_CPMAC
++/* following will be common, once 'utl' added */
++extern const char hcClear[];
++extern const char hcGet[];
++extern const char hcSet[];
++extern const char hcTick[];
++
++extern const char hcCpuFrequency[];
++extern const char hcCpmacFrequency[];
++extern const char hcMdioBusFrequency[];
++extern const char hcMdioClockFrequency[];
++extern const char hcCpmacBase[];
++extern const char hcPhyNum[];
++extern const char hcSize[];
++extern const char hcCpmacSize[];
++extern const char hcPhyAccess[];
++extern const char hcMdixMask[];
++extern const char hcMdioMdixSwitch[];
++#endif
++
++#endif  /*  end of _INC_    */
+diff -urN linux.old/drivers/net/avalanche_cpmac/dox_cpmac.h linux.dev/drivers/net/avalanche_cpmac/dox_cpmac.h
+--- linux.old/drivers/net/avalanche_cpmac/dox_cpmac.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/dox_cpmac.h	2005-07-12 02:48:42.050593000 +0200
+@@ -0,0 +1,842 @@
++/*****************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE:
++ *
++ *  DESCRIPTION:
++ *      This file contains documentation for the CPMAC
++ *
++ *  HISTORY:
++ *  @author Michael Hanrahan/Greg Guyotte
++ *  @version 1.00
++ *  @date    03-Dec-2002
++ *****************************************************************************/
++#ifndef _DOX_CPMAC_H
++#define _DOX_CPMAC_H
++/**
++@page CPMAC_Implementation_Details Version
++
++@copydoc CPMAC_Version
++*/
++
++/**
++@page cpmac_intro Introduction
++
++The CPMAC implementation will support 8 channels for transmit and 8 channel for
++receive.  Each of the 8 transmit channels has 1 queue associated with it.  It is
++recommended that only 1 channel is used for @c Receive() per processor.
++*/
++
++/**
++@page cpmac_details API Implementation Details
++@par osReceive
++@p Mode parameter
++- The Upper 16 bits of Mode match Word 3 of the Rx Buffer Descriptor
++
++@par halSend
++@p Mode parameter
++-  Bits 0-7 contain the Channel Number
++-  Bits 8-25 are reserved
++-  Bit  26 - if 0, the CRC will be calculated, if 1 the CRC will be Passed
++-  Bits 27-31 : reserved
++@section cpmac_keys Control Keys
++
++@par StateChange
++CPHAL calls the OS when a state change is detected.
++OS should check the CPMAC Status. See the Control Key 'Status' for more details.
++
++@par Status
++OS calls the CPHAL to obtain Status information. The Returned status is as follows
++
++@par MaxFrags
++The OS may "Set" or "Get" this value.  This defines the maximum
++number of fragments that can be received by the CPMAC Rx port.  The default
++value for CPMAC is 2.  This provides enough space to receive a maximum
++length packet (1,518 bytes) with the default buffer size of 1518 and any
++amount of RxBufferOffset.  If the buffer size is configured to be smaller,
++the OS *MUST* modify this parameter according to the following formula:
++((System Max packet length)/(RxBufSize)) + 1.  (The extra 1 fragment is to
++allow for RxBufferOffset)
++
++@code
++// Following defined in "cpswhal_cpmac.h"
++// CPMAC CPHAL STATUS
++#define CPMAC_STATUS_LINK               (1 << 0)
++#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  // 0 - HD, 1 - FD
++#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  // 0 - 10, 1 - 100
++
++// ADAPTER CHECK Codes
++#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
++#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)    // 0 - Tx, 1 - Rx
++#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)  See CPMAC Guide
++#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13) See CPMAC Guide
++@endcode
++
++@code
++void osStateChange(OS_DEVICE *OsDev)
++  {
++  int status;
++  OsDev->HalFunc->Control(OsDev->HalDev, "Status", hcGet, &status);
++  if(status & CPMAC_STATUS_ADAPTER_CHECK)
++    {
++    printf("[osStateChange[%d]]  HAL notified OS of AdapterCheck (Link Status 0x%08X)\n", OsDev->port, status);
++    adaptercheck(OsDev->port);
++    }
++  else
++    {
++    printf("[osStateChange[%d]]  HAL notified OS of State Change (Link Status %s)\n", OsDev->port, (status & CPMAC_STATUS_LINK) ? "Up" : "Down");
++    if(status & CPMAC_STATUS_LINK)
++      {
++      printf("Speed %s, Duplex %s\n",
++      status & CPMAC_STATUS_LINK_SPEED ? "100" : "10",
++      status & CPMAC_STATUS_LINK_DUPLEX ? "FD" : "HD");
++      }
++    }
++@endcode
++
++@par Tick
++     The CPHAL calls the OS to set the interval for calling halTick()<BR>
++     Note: Predefined value hcTick now recommended for use.
++@code
++***  Example Code ***
++
++*** CPHAL code ***
++int Ticks;
++HalDev->OsFunc->Control(HalDev->OsDev, hcTick, hcSet, &Ticks);
++
++*** OS code ***
++  ..
++  if(osStrcmpi(pszKey, hcTick) == 0)
++  {
++    if(osStrcmpi(pszAction, hcSet) == 0)
++    {
++      // Enable the Tick Interval
++      if(*(unsigned int *) ParmValue)
++        printf("osTickSet: Interval = %d ticks\n", Interval);
++    }
++    else
++    if(osStrcmpi(pszAction, hcClear) == 0)
++    {
++        // Request disabling of the Tick Timer, ParmValue is ignored
++    }
++  }
++@endcode
++
++@par The following information can be obtained by the OS via 'Get'
++
++- StatsDump : OS supplies pointer to an 36 element unsigned int array
++CPHAL will populate the array with the current Statistics values.<BR>
++Note: all hcXXXX values are predefined and should be used by the OS.
++
++- hcPhyNum : Returns the PHY number.
++- hcCpmacBase : Returns the base-address of the CPMAC device
++- hcCpmacSize : Returns size of the CPMAC memory map
++
++
++@par Phy Register Communication
++
++halControl() is used to read and write the Phy Registers via the key hcPhyAccess
++
++Both reading and writing the Phy registers involve setting the Value parameter of halControl()
++<BR>
++Value is a 32-bit value with bits partioned as follows
++<BR>
++
++   0 -  4  Phy Number   <BR>
++   5 -  9  Phy Register <BR>
++  10 - 15  reserved     <BR>
++  16 - 31  Data  (write only)
++<BR>
++
++
++<B>Reading the Phy register</B>
++
++@code
++    bit32u Value;
++    bit32u RegAddr;
++    bit32u PhyNum;
++    bit32u PhyRegisterData;
++
++    //  Read Phy 31, register 20
++
++    PhyNum  = 31;
++    RegAddr = 20;
++
++    Value = (RegAddr << 5);
++    Value |= (PhyNum & 0x1F);
++
++    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcGet, (bit32u *) &Value)
++    If(rc == 0)
++    {
++        // Value is overwriten with the value in Register 20 of Phy number 31.
++        PhyRegisterData = Value;
++    }
++@endcode
++
++<B>Writing the Phy register</B>
++@code
++    bit32u Value;
++    bit32u RegAddr;
++    bit32u PhyNum;
++    bit32u PhyRegisterData;
++
++    //  Reset Phy 23
++
++    PhyNum  = 23;
++    RegAddr = 0;
++    PhyRegisterData = 0x8000;  // Reset bit set
++
++    Value = (RegAddr << 5);
++    Value |= (PhyNum & 0x1F);
++    Value |= (PhyRegisterData << 16);
++
++    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcSet, (bit32u *) &Value)
++
++    // Check is reset if done
++
++    PhyNum  = 23;
++    RegAddr = 0;
++
++    Value = (RegAddr << 5);
++    Value |= (PhyNum & 0x1F);
++
++    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcGet, (bit32u *) &Value)
++
++    If(rc == 0)
++    {
++        // Value is overwriten with the value in Register 0 of Phy number 23.
++        PhyRegisterData = Value;
++        if((PhyRegisterData & 0x8000) == 0)
++           ResetIsComplete;
++    }
++
++@endcode
++<B>
++*** Example Showing turning values off/on ***
++<BR>
++</B>
++
++@code
++
++int On=1;
++int Off=0;
++   # Turn On loopback
++   OsDev->HalFunc->Control(OsDev->HalDev, "CTRL_LOOPBACK", hcSet, (int*) &On);
++
++   #  Turn off RX Flow
++   OsDev->HalFunc->Control(OsDev->HalDev, "RX_FLOW_EN", hcSet, (int*) &Off);
++@endcode
++
++@par CPMAC Configurable Parameters
++
++- RX_PASS_CRC        : See MBP_Enable description
++- RX_QOS_EN          : See MBP_Enable description
++- RX_NO_CHAIN        : See MBP_Enable description
++- RX_CMF_EN          : See MBP_Enable description
++- RX_CSF_EN          : See MBP_Enable description
++- RX_CEF_EN          : See MBP_Enable description
++- RX_CAF_EN          : See MBP_Enable description
++- RX_PROM_CH         : See MBP_Enable description
++- RX_BROAD_EN        : See MBP_Enable description
++- RX_BROAD_CH        : See MBP_Enable description
++- RX_MULT_EN         : See MBP_Enable description
++- RX_MULT_CH         : See MBP_Enable description
++
++- TX_PTYPE           : See MacControl description
++- TX_PACE            : See MacControl description
++- TX_FLOW_EN         : See MacControl description
++- RX_FLOW_EN         : See MacControl description
++- CTRL_LOOPBACK      : See MacControl description
++
++- RX_MAXLEN          : See CPMAC Guide
++- RX_FILTERLOWTHRESH : See CPMAC Guide
++- RX0_FLOWTHRESH     : See CPMAC Guide
++- RX_UNICAST_SET     : See CPMAC Guide
++- RX_UNICAST_CLEAR   : See CPMAC Guide
++
++@par Multicast Support
++- RX_MULTI_ALL       : When used with hcSet, sets all the Hash Bits. When used
++with hcClear clears all the Hash Bits.
++- RX_MULTI_SINGLE    : When used with hcSet, adds the Hashed Mac Address. When used
++with hcClear deletes the Hashed Mac Address.
++Note: Support will be added to keep track of Single additions and deletions.
++
++@code
++*** Example Code ***
++
++*** OS code ***
++  bit8u  MacAddress[6];
++  MacAddress[0] = 0x80;
++  MacAddress[1] = 0x12;
++  MacAddress[2] = 0x34;
++  MacAddress[3] = 0x56;
++  MacAddress[4] = 0x78;
++  MacAddress[5] = 0x78;
++  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_SINGLE", hcSet, (bit8u*) &MacAddress);
++  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_SINGLE", hcClear, (bit8u*) &MacAddress);
++  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_ALL", hcSet, NULL);
++  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_ALL", hcClear, NULL);
++@endcode
++@par MdioConnect Fields
++<BR>
++- "MdioConnect"     : The OS can set the Phy connection using this key. The default connection is Auto-Negotiation ON, All modes possible.
++
++
++- _CPMDIO_HD       <----- Allow Half Duplex, default is 1 (On)
++- _CPMDIO_FD       <----- Allow Full Duplex, default is 1 (On)
++- _CPMDIO_10       <----- Allow 10  Mbs, default is 1 (On)
++- _CPMDIO_100      <----- Allow 100 Mbs, default is 1 (On)
++- _CPMDIO_NEG_OFF  <----- Turn off Auto Negotiation, default is 0 (Auto Neg is on)
++- _CPMDIO_NOPHY    <----- Set for use with Marvel-type switch, default is 0 (Phy present)
++- _CPMDIO_AUTOMDIX  <---- Enables Auto Mdix (in conjunction with MdixMask), default is 1 (On)
++
++Note: When _CPMDIO_NOPHY is set, CPMAC will report being linked at 100/FD. Reported PhyNum will be 0xFFFFFFFF
++
++@par Setting CPMAC for use with a Marvel-type Switch
++@code
++     bit32u MdioConnect;
++
++     MdioConnect = _CPMDIO_NOPHY;
++     OsDev->HalFunc->Control(OsDev->HalDev, "MdioConnect", hcSet, (bit32u*) &MdioConnect);
++@endcode
++
++@par OS Support for MDIO
++@p The OS will need to supply the following values which the CPHAL will request via halControl()
++<BR>
++- MdioBusFrequency : The frequency of the BUS that MDIO is on (requested via hcMdioBusFrequency)
++<BR>
++- MdioClockFrequency : The desired Clock Frequency that MDIO qill operate at (requested via hcMdioClockFrequency)
++*/
++
++/**
++@page cpmac_conf DeviceFindxxx() Parameters
++
++These are some of the parameters that the CPMAC will request via the DeviceFindxxx() functions -
++<BR>
++- "Mlink"    : bit mask indicating what link status method Phy is using. Default is MDIO state machine (0x0)
++- "PhyMask"  : bit mask indicating PhyNums used by this CPMAC (e.g 0x8000000, PhyNum is 31)
++- "MdixMask" : bit mask indicating which Phys support AutoMdix. Default is 0x0 (None)
++<BR>
++@par Example cpmac definition from the options.conf for the Sangam VDB
++<BR>
++- cpmac( id=eth0, base=0xA8610000, size=0x800, reset_bit=17, int_line=19, PhyMask=0x80000000, MLink=0, MdixMask=0 )
++*/
++
++/**
++@page auto_mdix Auto Mdix Support
++
++Auto Mdix selection is controlled by two elements in the CPMAC. First the OS can turn Auto Midx On or Off by the use of the
++MdioConnect field, _CPMDIO_AUTOMDIX. This is defaulted ON.  For actual Auto Mdix operation the Phy must also be Auto Mdix capable.
++This is specified by the DeviceFindxxx() field, "MdixMask" (supplied as the variable hcMdixMask).
++If both these fields are set then the CPMDIO state machine will be enabled for Auto Mdix checking.
++If a switch to MDI or MDIX mode is needed, the CPMAC will signal this to the OS via Control() using
++the hcMdioMdixSwitch key.
++
++@par OS example for responding to a Mdix Switch Request
++<BR>
++@code
++if(osStrcmpi(pszKey, hcMdioMdixSwitch) == 0)  // See if key is Mdix Switch Request
++  {
++      if(osStrcmpi(pszAction, hcSet) == 0)   // Only respond to Set requests
++      {
++
++          bit32u Mdix;
++
++          Mdix = *(bit32u *) ParmValue;     // Extract requested Mode
++                                            // 0 : MDI
++                                            // 1 : MDIX
++          if(Mdix)
++            osSetPhyIntoMdixMode();         // Device specific logic
++          else
++            osSetPhyIntoMdiMode();          // Device specific logic
++          rc = 0;                           // Set return code as Successfull
++      }
++@endcode
++*/
++
++/**
++@page cpmac_stats CPMAC Specific Statistics
++
++Statistics level '0' contains all CPMAC specific statistics.
++
++
++*/
++
++/**
++@page Example_Driver_Code
++
++@section  example_intro Introduction
++This section provides an in-depth code example for driver implementations.  The code
++below illustrates the use of the CPMAC HAL, but is equally applicable to any CPHAL
++implementation. Note: the CPHAl constants hcGet, hcSet etc., are currently available for use with teh CPMAC module.
++Other modules should continue to use pszGET, etc. until these are made generally available.
++
++@par Pull Model Example
++
++@code
++
++#define _CPHAL_CPMAC
++
++typedef struct _os_device_s  OS_DEVICE;
++typedef struct _os_receive_s OS_RECEIVEINFO;
++typedef struct _os_send_s    OS_SENDINFO;
++typedef struct _os_setup_s   OS_SETUP;
++
++#include "cpswhal_cpmac.h"
++
++#define dbgPrintf printf
++
++typedef struct  _os_device_s
++{
++   HAL_DEVICE    *HalDev;
++   HAL_FUNCTIONS *HalFunc;
++   OS_FUNCTIONS  *OsFunc;
++   OS_SETUP      *OsSetup;
++   bit32u        Interrupt;
++   int           (*halIsr)(HAL_DEVICE  *HalDev, int*);
++   int           ModulePort;
++   int           Protocol;
++   int           LinkStatus;  // 0-> down, otherwise up
++}os_device_s;
++
++typedef struct  _os_receive_s
++{
++   HAL_RECEIVEINFO *HalReceiveInfo;
++   char   *ReceiveBuffer;
++   OS_DEVICE  *OsDev;
++}os_receive_s;
++
++typedef struct  _os_send_s
++{
++   OS_DEVICE  *OsDev;
++}os_send_s;
++
++typedef struct  _os_setup_s
++{
++   OS_DEVICE  *OsDev;
++}os_setup_s;
++
++
++
++void FlowForCphal(OS_DEVICE *OsDev)
++{
++  CHANNEL_INFO ChannelInfo;
++  int nChannels = 200;
++  int halFuncSize;
++  int rc;
++
++  //  Populate OsFunc structure
++  rc =  osInitModule(OsDev);
++
++  if(rc)
++  {
++    sprintf(bufTmp, "%s: return code from osInitModule:'0x%08X'", __FUNCTION__, rc);
++    errorout(bufTmp);
++  }
++
++
++  //  OS-Cphal handshake
++  rc = halCpmacInitModule(&OsDev->HalDev, OsDev, &OsDev->HalFunc, OsDev->OsFunc,
++                              sizeof(OS_FUNCTIONS), &halFuncSize, OsDev->ModulePort);
++
++  if(rc)
++  {
++    sprintf(bufTmp, "%s: return code from halCpmacInitModule:'0x%08X'", __FUNCTION__, rc);
++    errorout(bufTmp);
++  }
++
++  // See if hardware module exists
++  rc = OsDev->HalFunc->Probe(OsDev->HalDev);
++
++  if(rc)
++  {
++    sprintf(bufTmp, "%s: return code from Probe:'0x%08X'", __FUNCTION__, rc);
++    errorout(bufTmp);
++  }
++
++  // Initialize hardware module
++  rc = OsDev->HalFunc->Init(OsDev->HalDev);
++
++  if(rc)
++  {
++    sprintf(bufTmp, "%s: return code from Init:'0x%08X'", __FUNCTION__, rc);
++    errorout(bufTmp);
++  }
++
++  // Setup Channel Information (Tranmsit, channel 0)
++  ChannelInfo.Channel      = 0;
++  ChannelInfo.Direction    = DIRECTION_TX;
++  ChannelInfo.TxNumBuffers = nChannels;
++  ChannelInfo.TxNumQueues  = 1;
++  ChannelInfo.TxServiceMax = nChannels/3;
++
++  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
++
++  // Setup Channel Information (Receive, channel 0)
++  ChannelInfo.Channel        = 0;
++  ChannelInfo.Direction      = DIRECTION_RX;
++  ChannelInfo.RxBufSize      = 1518;
++  ChannelInfo.RxBufferOffset = 0;
++  ChannelInfo.RxNumBuffers   = 2*nChannels;
++  ChannelInfo.RxServiceMax   = nChannels/3;
++
++  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
++
++  // Open the hardware module
++  rc = OsDev->HalFunc->Open(OsDev->HalDev);
++
++  // Module now ready to Send/Receive data
++}
++
++
++int osInitModule(OS_FUNCTIONS **pOsFunc)
++  {
++   OS_FUNCTIONS *OsFunc;
++
++   OsFunc = (OS_FUNCTIONS *) malloc(sizeof(OS_FUNCTIONS));
++   if (!OsFunc)
++     return (-1);
++
++   *pOsFunc = OsFunc;
++
++   OsFunc->CriticalOff               = osCriticalOff;
++   OsFunc->CriticalOn                = osCriticalOn;
++   OsFunc->DataCacheHitInvalidate    = osDataCacheHitInvalidate;
++   OsFunc->DataCacheHitWriteback     = osDataCacheHitWriteback;
++   OsFunc->DeviceFindInfo            = osDeviceFindInfo;
++   OsFunc->DeviceFindParmUint        = osDeviceFindParmUint;
++   OsFunc->DeviceFindParmValue       = osDeviceFindParmValue;
++   OsFunc->Free                      = osFree;
++   OsFunc->FreeDev                   = osFreeDev;
++   OsFunc->FreeDmaXfer               = osFreeDmaXfer;
++   OsFunc->FreeRxBuffer              = osFreeRxBuffer;
++   OsFunc->IsrRegister               = osIsrRegister;
++   OsFunc->IsrUnRegister             = osIsrUnRegister;
++   OsFunc->Malloc                    = osMalloc;
++   OsFunc->MallocDev                 = osMallocDev;
++   OsFunc->MallocDmaXfer             = osMallocDmaXfer;
++   OsFunc->MallocRxBuffer            = osMallocRxBuffer;
++
++
++   OsFunc->Memset                    = memset;
++   OsFunc->Printf                    = printf;
++   OsFunc->Sprintf                   = sprintf;
++   OsFunc->Strcmpi                   = osStrcmpi;
++   OsFunc->Strlen                    = strlen;
++   OsFunc->Strstr                    = strstr;
++   OsFunc->Strtoul                   = strtoul;
++
++   OsFunc->Control                   = osControl;
++   OsFunc->Receive                   = osReceive;
++   OsFunc->SendComplete              = osSendComplete;
++   OsFunc->TeardownComplete          = osTearDownComplete;
++
++   return(0);
++  }
++
++
++int osReceive(OS_DEVICE *OsDev,FRAGLIST *Fraglist,bit32u FragCount,bit32u PacketSize,HAL_RECEIVEINFO *halInfo, bit32u mode)
++  {
++  OS_RECEIVEINFO *skb = (OS_RECEIVEINFO *)Fraglist[0].OsInfo;
++  dcache_i((char *)Fraglist->data, Fraglist->len);
++  OsDev->HalFunc->RxReturn(halInfo,0);
++  return(0);
++  }
++
++int osSendComplete(OS_SENDINFO *skb)
++  {
++  return(0);
++  }
++
++
++static void *osMallocRxBuffer(bit32u Size,void *MemBase, bit32u MemRange,
++                              OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
++                              OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev )
++  {
++   void *HalBuffer;
++   OS_RECEIVEINFO *OsPriv;
++
++   HalBuffer=malloc(Size);
++   if (!HalBuffer)
++     {
++      return(0);
++     }
++
++   // Malloc the OS block
++   *OsReceiveInfo = malloc(sizeof(OS_RECEIVEINFO));
++   if (!*OsReceiveInfo)
++     {
++      free(HalBuffer);
++      return(0);
++     }
++
++   // Initialize the new buffer descriptor
++   OsPriv                 = *OsReceiveInfo;
++   OsPriv->OsDev          =  OsDev;
++   OsPriv->ReceiveBuffer  =  HalBuffer;
++   OsPriv->HalReceiveInfo =  HalReceiveInfo;
++
++   return(HalBuffer);
++  }
++
++
++void SendBuffer(OS_DEVICE *OsDev, char *Buffer, int Size)
++{
++  FRAGLIST Fraglist;
++  bit32u FragCount;
++
++  tcb_pending++;
++  Fraglist.len  = Size;
++  Fraglist.data = (unsigned *) Buffer;
++  FragCount     = 1;
++  mode          = 0;   //  Channel 0
++
++  dcache_wb(Fraglist.data, Fraglist.len);
++  OsDev->HalFunc->Send(OsDev->HalDev, &Fraglist, FragCount, Size, (OS_SENDINFO *) Buffer, mode);
++}
++
++
++void osStateChange(OS_DEVICE *OsDev)
++  {
++  int status;
++  int LinkStatus;
++  OsDev->HalFunc->Control(OsDev->HalDev, "Status", hcGet, &status);
++  if(status & CPMAC_STATUS_ADAPTER_CHECK)
++    {
++    //  Adapter Check, take appropiate action
++    }
++  else
++    {
++    LinkStatus = status & CPMAC_STATUS_LINK;
++    if(LinkStatus != OsDev->LinkStatus)
++      {
++      dbgPrintf("\n%s:Link %s for inst %d Speed %s, Duplex %s\n",
++                 __FUNCTION__,
++                 LinkStatus ? "up" : "down",
++                 OsDev->ModulePort,
++                 status & CPMAC_STATUS_LINK_SPEED ? "100" : "10",
++                 status & CPMAC_STATUS_LINK_DUPLEX ? "FD" : "HD");
++      OsDev->LinkStatus = LinkStatus;
++      }
++    }
++  }
++
++
++int osControl(OS_DEVICE *OsDev, const char *pszKey, const char* pszAction, void *ParmValue)
++  {
++  int rc=-1;
++
++  if (osStrcmpi(pszKey, hcCpuFrequency) == 0)
++   {
++   if(osStrcmpi(pszAction, hcGet) == 0)
++     {
++     *(bit32u*) ParmValue = cpufreq;
++     rc = 0;
++     }
++   }
++  if (osStrcmpi(pszKey, hcMdioBusFrequency) == 0)
++   {
++   if(osStrcmpi(pszAction, hcGet) == 0)
++     {
++     *(bit32u *)ParmValue = MdioBusFrequency;
++     rc = 0;
++     }
++   }
++if (osStrcmpi(pszKey, hcMdioClockFrequency) == 0)
++   {
++   if(osStrcmpi(pszAction, hcGet) == 0)
++     {
++     *(bit32u *)ParmValue = MdioClockFrequency;
++     rc = 0;
++     }
++   }
++
++  if (osStrcmpi(pszKey, hcTick) == 0)
++   {
++   if(osStrcmpi(pszAction, hcSet) == 0)
++     {
++       osTickSetInterval(OsDev, *(unsigned int *) ParmValue);
++       rc = 0;
++     }
++   else
++   if(osStrcmpi(pszAction, hcClear) == 0)
++     {
++       osTickDisable(OsDev);
++       rc = 0;
++     }
++   }
++
++  if (osStrcmpi(pszKey, "SioFlush") == 0)
++    {
++       MySioFlush();
++       rc = 0;
++    }
++
++  if (osStrcmpi(pszKey, "StateChange") == 0)
++    {
++       osStateChange(OsDev);
++       rc = 0;
++    }
++
++  if (osStrcmpi(pszKey, "Sleep") == 0)
++    {
++       osSleep(*(int *)ParmValue);
++       rc = 0;
++    }
++  return(rc);
++  }
++
++@endcode
++
++
++@par Push Model Example (Currently Eswitch ONLY)
++
++@code
++
++typedef struct _os_device_s  OS_DEVICE;
++typedef struct _os_receive_s OS_RECEIVEINFO;
++typedef struct _os_send_s    OS_SENDINFO;
++typedef struct _os_setup_s   OS_SETUP;
++
++#include "cpswhal.h"          //Get glogal HAL stuff
++#include "cpswhaleswitch.h"   //Get device specific hal stuff
++
++
++typedef struct  _os_device_s
++{
++   HAL_DEVICE    *HalDev;
++   HAL_FUNCTIONS *HalFunc;
++   OS_FUNCTIONS  *OsFunc;
++   OS_SETUP      *OsSetup;
++   bit32u        Interrupt;
++   int           (*halIsr)(HAL_DEVICE  *HalDev, int*);
++   int           ModulePort;
++   int           Protocol;
++   int           LinkStatus;  // 0-> down, otherwise up
++}os_device_s;
++
++typedef struct  _os_receive_s
++{
++   HAL_RECEIVEINFO *HalReceiveInfo;
++   char   *ReceiveBuffer;
++   OS_DEVICE  *OsDev;
++}os_receive_s;
++
++typedef struct  _os_send_s
++{
++   OS_DEVICE  *OsDev;
++}os_send_s;
++
++typedef struct  _os_setup_s
++{
++   OS_DEVICE  *OsDev;
++}os_setup_s;
++
++
++
++void FlowForCphal(OS_DEVICE *OsDev)
++{
++CHANNEL_INFO ChannelInfo;
++  int nChannels = 200;
++  int halFuncSize;
++  int rc;
++
++  //  Populate OsFunc structure
++  rc =  osInitModule(OsDev);
++
++  if(rc)
++  {
++    sprintf(bufTmp, "%s: return code from osInitModule:'0x%08X'", __FUNCTION__, rc);
++    errorout(bufTmp);
++  }
++
++
++  //  OS-Cphal handshake
++  rc = cpswHalEswitchInitModule(&OsDev->HalDev, OsDev, &OsDev->HalFunc, OsDev->OsFunc,
++                              sizeof(OS_FUNCTIONS), &halFuncSize, OsDev->ModulePort);
++
++  if(rc)
++  {
++    sprintf(bufTmp, "%s: return code from cpswHalEswitchInitModule:'0x%08X'", __FUNCTION__, rc);
++    errorout(bufTmp);
++  }
++
++
++  ChannelInfo.Channel      = 7;
++  ChannelInfo.Direction    = DIRECTION_RX;
++  ChanInfo.Receive = osReceiveSS;         //  Specify function to receive data for this channel
++
++  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
++
++  MyConfig.debug=0;
++  MyConfig.CpuFrequency = CpuFreq;
++  MyConfig.EswitchFrequency = EswitchFreq;
++  MyConfig.ResetBase  = 0xa8611600;
++  MyConfig.MacAddress = MacAddr;
++
++  MyConfig.EswitchResetBit= 27;
++  MyConfig.Cpmac0ResetBit = 17;
++  MyConfig.Cpmac1ResetBit = 21;
++  MyConfig.MdioResetBit   = 22;
++  MyConfig.Phy0ResetBit   = 26;
++  MyConfig.Phy1ResetBit   = 28;
++  MyConfig.HdmaResetBit   = 13;
++  MyConfig.Cpmac0IntBit   = 19;
++  MyConfig.Cpmac1IntBit   = 33;
++  MyConfig.EswitchIntBit  = 27;
++  MyConfig.EswitchBase    = 0xa8640000;
++  MyConfig.EswitchBufferSize     = 64;
++  MyConfig.EswitchHostBufCount   = 0;
++  MyConfig.EswitchDefaultCamSize = 64;
++  MyConfig.EswitchOverFlowCount  = 200;
++  MyConfig.EswitchOverFlowSize   = 256;
++
++
++
++
++  rc=EswitchConfig(HalDev,HalFunc,&MyConfig);
++
++
++  // Open the hardware module
++  rc = OsDev->HalFunc->Open(OsDev->HalDev);
++
++  // Module now ready to Send/Receive data
++}
++
++
++int EswitchConfig(HAL_DEVICE *HalDev, HAL_FUNCTIONS *HalFunc, ESWITCH_CONFIG *Config)
++{
++  bit32u sts;
++  sts = 0;
++
++  sts |= cpswhalPushBin(hcdebug, Config->debug);
++  sts |= cpswhalPushBin(hcCpuFrequency     , Config->CpuFrequency );
++  sts |= cpswhalPushBin(hcEswitchFrequency , Config->EswitchFrequency );
++  sts |= cpswhalPushBin(hcResetBase        , Config->ResetBase  );
++  sts |= cpswhalPushBin(hcMacAddress       , Config->MacAddress );
++  sts |= cpswhalPushBin(hcEswitchResetBit, Config->EswitchResetBit);
++  sts |= cpswhalPushBin(hcCpmac0ResetBit , Config->Cpmac0ResetBit );
++  sts |= cpswhalPushBin(hcCpmac1ResetBit , Config->Cpmac1ResetBit );
++  sts |= cpswhalPushBin(hcMdioResetBit   , Config->MdioResetBit   );
++  sts |= cpswhalPushBin(hcPhy0ResetBit   , Config->Phy0ResetBit   );
++  sts |= cpswhalPushBin(hcPhy1ResetBit   , Config->Phy1ResetBit   );
++  sts |= cpswhalPushBin(hcHdmaResetBit   , Config->HdmaResetBit   );
++  sts |= cpswhalPushBin(hcCpmac0IntBit   , Config->Cpmac0IntBit   );
++  sts |= cpswhalPushBin(hcCpmac1IntBit   , Config->Cpmac1IntBit   );
++  sts |= cpswhalPushBin(hcEswitchIntBit  , Config->EswitchIntBit  );
++  sts |= cpswhalPushBin(hcEswitchBase           , Config->EswitchBase    );
++  sts |= cpswhalPushBin(hcEswitchBufferSize     , Config->EswitchBufferSize     );
++  sts |= cpswhalPushBin(hcEswitchHostBufCount   , Config->EswitchHostBufCount   );
++  sts |= cpswhalPushBin(hcEswitchDefaultCamSize , Config->EswitchDefaultCamSize );
++  sts |= cpswhalPushBin(hcEswitchOverFlowCount  , Config->EswitchOverFlowCount  );
++  sts |= cpswhalPushBin(hcEswitchOverFlowSize   , Config->EswitchOverFlowSize   );
++  return(sts);
++}
++
++
++
++@endcode
++*/
++
++#endif
+diff -urN linux.old/drivers/net/avalanche_cpmac/ec_errors_cpmac.h linux.dev/drivers/net/avalanche_cpmac/ec_errors_cpmac.h
+--- linux.old/drivers/net/avalanche_cpmac/ec_errors_cpmac.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/ec_errors_cpmac.h	2005-07-12 02:48:42.051592000 +0200
+@@ -0,0 +1,118 @@
++/***************************************************************************
++ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
++
++ FILE:  ec_errors.h
++
++ DESCRIPTION:
++   This file contains definitions and function declarations for
++   error code support.
++
++ HISTORY:
++   14Dec00 MJH             Added masking to EC_CLASS etc macros
++   17Sep02 GSG             Added HAL support (new class&devices)
++   03Oct02 GSG             Removed C++ style comments
++***************************************************************************/
++#ifndef _INC_EC_ERRORS
++#define _INC_EC_ERRORS
++
++/*
++  31    - CRITICAL
++  30-28 - CLASS         (ie. DIAG, KERNEL, FLASH, etc)
++  27-24 - INSTANCE      (ie. 1, 2, 3, etc )
++  23-16 - DEVICE        (ie. EMAC, IIC, etc)
++  15-08 - FUNCTION      (ie. RX, TX, INIT, etc)
++  07-00 - ERROR CODE    (ie. NO_BASE, FILE_NOT_FOUND, etc )
++*/
++
++/*---------------------------------------------------------------------------
++  Useful defines for accessing fields within error code
++---------------------------------------------------------------------------*/
++#define CRITICAL_SHIFT    31
++#define CLASS_SHIFT       28
++#define INST_SHIFT        24
++#define DEVICE_SHIFT      16
++#define FUNCTION_SHIFT     8
++#define ERROR_CODE_SHIFT   0
++
++#define CRITICAL_MASK     1
++#define CLASS_MASK        0x07
++#define DEVICE_MASK       0xFF
++#define INST_MASK         0x0F
++#define FUNCTION_MASK     0xFF
++#define ERROR_CODE_MASK   0xFF
++
++#define EC_CLASS(val)     ((val&CLASS_MASK)      << CLASS_SHIFT)
++#define EC_DEVICE(val)    ((val&DEVICE_MASK)     << DEVICE_SHIFT)
++#define EC_INST(val)      ((val&INST_MASK)       << INST_SHIFT)
++#define EC_FUNC(val)      ((val&FUNCTION_MASK)   << FUNCTION_SHIFT)
++#define EC_ERR(val)       ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
++
++/*---------------------------------------------------------------------------
++   Operation classes
++---------------------------------------------------------------------------*/
++#define EC_HAL              EC_CLASS(0)
++#define EC_DIAG             EC_CLASS(8)
++
++/*---------------------------------------------------------------------------
++   Device types
++---------------------------------------------------------------------------*/
++#define EC_DEV_EMAC         EC_DEVICE(1)
++#define EC_DEV_IIC          EC_DEVICE(2)
++#define EC_DEV_RESET        EC_DEVICE(3)
++#define EC_DEV_ATMSAR       EC_DEVICE(4)
++#define EC_DEV_MEM          EC_DEVICE(5)
++#define EC_DEV_DES          EC_DEVICE(6)
++#define EC_DEV_DMA          EC_DEVICE(7)
++#define EC_DEV_DSP          EC_DEVICE(8)
++#define EC_DEV_TMR          EC_DEVICE(9)
++#define EC_DEV_WDT          EC_DEVICE(10)
++#define EC_DEV_DCL          EC_DEVICE(11)
++#define EC_DEV_BBIF         EC_DEVICE(12)
++#define EC_DEV_PCI              EC_DEVICE(13)
++#define EC_DEV_XBUS         EC_DEVICE(14)
++#define EC_DEV_DSLIF            EC_DEVICE(15)
++#define EC_DEV_USB                      EC_DEVICE(16)
++#define EC_DEV_CLKC                     EC_DEVICE(17)
++#define EC_DEV_RAPTOR       EC_DEVICE(18)
++#define EC_DEV_DSPC                     EC_DEVICE(19)
++#define EC_DEV_INTC                     EC_DEVICE(20)
++#define EC_DEV_GPIO                     EC_DEVICE(21)
++#define EC_DEV_BIST                     EC_DEVICE(22)
++#define EC_DEV_HDLC                     EC_DEVICE(23)
++#define EC_DEV_UART                     EC_DEVICE(24)
++#define EC_DEV_VOIC                     EC_DEVICE(25)
++/* 9.17.02 (new HAL modules) */
++#define EC_DEV_CPSAR        EC_DEVICE(0x1A)
++#define EC_DEV_AAL5         EC_DEVICE(0x1B)
++#define EC_DEV_AAL2         EC_DEVICE(0x1C)
++#define EC_DEV_CPMAC        EC_DEVICE(0x1D)
++#define EC_DEV_VDMA         EC_DEVICE(0x1E)
++#define EC_DEV_VLYNQ        EC_DEVICE(0x1F)
++#define EC_DEV_CPPI         EC_DEVICE(0x20)
++#define EC_DEV_CPMDIO       EC_DEVICE(0x21)
++
++/*---------------------------------------------------------------------------
++   Function types
++---------------------------------------------------------------------------*/
++#define EC_FUNC_READ_CONF   EC_FUNC(1)
++#define EC_FUNC_INIT        EC_FUNC(2)
++
++/*---------------------------------------------------------------------------
++   Error codes
++---------------------------------------------------------------------------*/
++#define EC_CRITICAL         (1<<CRITICAL_SHIFT)
++#define EC_NO_ERRORS        0
++#define EC_VAL_NO_BASE      EC_ERR(1)
++#define EC_VAL_NO_RESET_BIT EC_ERR(2)
++#define EC_VAL_NO_RESET     EC_ERR(3)
++#define EC_VAL_BAD_BASE     EC_ERR(4)
++#define EC_VAL_MALLOCFAILED EC_ERR(5)
++#define EC_VAL_NO_RESETBASE EC_ERR(6)
++#define EC_DEVICE_NOT_FOUND EC_ERR(7)
++
++/*---------------------------------------------------------------------------
++   Function declarations
++---------------------------------------------------------------------------*/
++extern void ec_log_error( unsigned int );
++
++#endif /* _INC_EC_ERRORS */
+diff -urN linux.old/drivers/net/avalanche_cpmac/hcpmac.c linux.dev/drivers/net/avalanche_cpmac/hcpmac.c
+--- linux.old/drivers/net/avalanche_cpmac/hcpmac.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/hcpmac.c	2005-07-12 02:48:42.174574000 +0200
+@@ -0,0 +1,1878 @@
++/******************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002-2004 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE:
++ *
++ *  DESCRIPTION:
++ *      This file contains the code for the HAL EMAC Bridge Test
++ *
++ *  HISTORY:
++ *  xxXxx01 Denis            RC1.00  Original Version created.
++ *  22Jan02 Denis/Mick       RC1.01  Modified for HAL EMAC API
++ *  24Jan02 Denis/Mick       RC1.02  Speed Improvements
++ *  28Jan02 Denis/Mick       RC1.16  Made function calls pointers
++ *  28Jan02 Mick             RC1.18  Split into separate modules
++ *  29Jan02 Mick             RC1.19  Hal include file cleaned up
++ *  15Jul02 Michael Hanrahan RC1.20  Synch'd with Linux Version
++ *  23Sep02 Michael Hanrahan RC1.21  Added CPPI.C
++ *  16Oct02 Michael Hanrahan RC1.22  Added CAF etc to Options.Conf
++ *  09Jan03 Michael Hanrahan RC3.01  Fixed incorrect MDIO check
++ *  01Feb03 Michael Hanrahan RC3.02  Updated for GPIO/PBUSFREQ
++ *  29Mar03 Michael Hanrahan 1.03 Corrected  ChannelConfigGet
++ *  29Mar03 Michael Hanrahan 1.03 Removed user setting of TxNumQueues
++ *  23Aug04 Michael Hanrahan 1.7.8 Support for Setting Mac Address
++ *  @author Michael Hanrahan
++ *  @version 1.02
++ *  @date    24-Jan-2002
++ *****************************************************************************/
++#define _HAL_CPMAC
++#define _CPHAL_CPMAC
++#define _CPHAL
++#define __CPHAL_CPMDIO
++
++#include "dox_cpmac.h"  /*  Documentation information */
++
++/*  OS Data Structure definitions  */
++
++typedef void OS_PRIVATE;
++typedef void OS_DEVICE;
++typedef void OS_SENDINFO;
++typedef void OS_RECEIVEINFO;
++typedef void OS_SETUP;
++
++/*  HAL Data Structure definitions  */
++
++typedef struct _phy_device PHY_DEVICE;
++typedef struct hal_device  HAL_DEVICE;
++typedef struct hal_private HAL_PRIVATE;
++typedef struct hal_private HAL_RECEIVEINFO;
++
++#include "cpcommon_cpmac.h"
++#include "cpswhal_cpmac.h"
++#include "cpmdio.h"
++#include "hcpmac.h"
++#include "cpmac_reg.h"
++
++
++#define EC_MODULE
++
++/* MDIO Clock Frequency Default Value */
++
++/* Rcb/Tcb Constants */
++
++#define CB_SOF_BIT         (1<<31)
++#define CB_EOF_BIT         (1<<30)
++#define CB_SOF_AND_EOF_BIT (CB_SOF_BIT|CB_EOF_BIT)
++#define CB_OWNERSHIP_BIT   (1<<29)
++#define CB_EOQ_BIT         (1<<28)
++#define CB_SIZE_MASK       0x0000ffff
++#define RCB_ERRORS_MASK    0x03fe0000
++
++static char *channel_names[]   = CHANNEL_NAMES; /* GSG 11/22 (may change this implementation) */
++
++#define scFound(Module) if (HalDev->State != enDevFound)    return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
++#define scInit(Module)  if (HalDev->State <  enInitialized) return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
++#define scOpen(Module)  if (HalDev->State <  enOpened)      return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
++
++
++
++/********************************************************************
++**
++**  L O C A L  F U N C T I O N S
++**
++********************************************************************/
++static int halIsr(HAL_DEVICE *HalDev, int *MorePackets);
++static int cpmacRandom(HAL_DEVICE *HalDev);
++static int cpmacRandomRange(HAL_DEVICE *HalDev, int min, int max);
++static int halPacketProcessEnd(HAL_DEVICE *HalDev);
++
++#include "cpcommon_cpmac.c"                                                /*~RC3.02*/
++#include "cppi_cpmac.c"
++#include "cpmdio.c"                                                  /*~RC3.02*/
++
++static int MacAddressSave(HAL_DEVICE *HalDev, unsigned char *MacAddr)
++  {
++  int i;
++  int inst             = HalDev->inst;
++
++  HalDev->MacAddr = MacAddr;
++
++  if(HalDev->debug)
++    {
++    dbgPrintf("MacAddrSave[%d]: ", inst);
++    for (i=0;i<6;i++)
++       dbgPrintf("%X", HalDev->MacAddr[i]);
++    dbgPrintf("\n");
++    osfuncSioFlush();
++    }
++  return(EC_NO_ERRORS);
++  }
++static int MacAddressSet(HAL_DEVICE *HalDev)
++  {
++  unsigned char *macadr = &HalDev->MacAddr[0];
++  int base             = HalDev->dev_base;
++
++  scOpen(EC_CPMAC);
++  CPMAC_MACADDRLO_0(base) = macadr[5];
++  CPMAC_MACADDRMID(base)  = macadr[4];
++  CPMAC_MACADDRHI(base)   = (macadr[0])|(macadr[1]<<8)|(macadr[2]<<16)|(macadr[3]<<24);
++  if(HalDev->debug)
++    {
++     dbgPrintf("MacAddrSet: MacAddr(%d) %X %X %X\n", HalDev->inst, CPMAC_MACADDRLO_0(base),
++                                                     CPMAC_MACADDRMID(base),
++                                                     CPMAC_MACADDRHI(base));
++
++     dbgPrintf("Start MAC: %d\n",HalDev->dev_base);
++     osfuncSioFlush();
++    }
++  return(EC_NO_ERRORS);
++  }
++
++
++/*
++  Updates the MacHash registers
++*/
++static void MacHashSet(HAL_DEVICE *HalDev)
++  {
++  if(HalDev->State <  enOpened)
++    return;
++
++  CPMAC_MACHASH1(HalDev->dev_base) = HalDev->MacHash1;
++  CPMAC_MACHASH2(HalDev->dev_base) = HalDev->MacHash2;
++  if (DBG(11))
++    dbgPrintf("CPMAC[%X]: MacHash1 0x%08X, MacHash2 0x%08X\n", HalDev->dev_base, CPMAC_MACHASH1(HalDev->dev_base), CPMAC_MACHASH2(HalDev->dev_base));
++  }
++
++/*
++  Reads the MacControl register and updates
++  the changable bits. (See MACCONTROL_MASK)
++*/
++static void RxMBP_EnableSet(HAL_DEVICE *HalDev)
++  {
++   bit32u RxMbpEnable;
++   if(HalDev->State <  enOpened)
++     return;
++   RxMbpEnable  = CPMAC_RX_MBP_ENABLE(HalDev->dev_base);
++   RxMbpEnable &= ~RX_MBP_ENABLE_MASK; /* Clear out updatable bits */
++   RxMbpEnable |= HalDev->RxMbpEnable;
++   CPMAC_RX_MBP_ENABLE(HalDev->dev_base) = RxMbpEnable;
++  }
++/*
++  Reads the MacControl register and updates
++  the changable bits. (See MACCONTROL_MASK)
++*/
++static void MacControlSet(HAL_DEVICE *HalDev)
++  {
++   bit32u MacControl;
++   if(HalDev->State <  enOpened)
++     return;
++   MacControl  = CPMAC_MACCONTROL(HalDev->dev_base);
++   MacControl &= ~MACCONTROL_MASK; /* Clear out updatable bits */
++   MacControl |= HalDev->MacControl;
++   if(!(MacControl & MII_EN)) /* If Enable is not set just update register  */
++      CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
++   else
++     {
++     if(MacControl & CTRL_LOOPBACK)    /*  Loopback Set  */
++       {
++       /* mii_en is set and loopback is needed,
++          clear mii_en, set loopback, then set mii_en
++       */
++       MacControl &= ~MII_EN;  /* Clear MII_EN  */
++       CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
++       CPMAC_MACCONTROL(HalDev->dev_base) |= MII_EN; /* Set MII_EN  */
++       HalDev->Linked = 1; /* if in loopback the logically linked */
++       }
++     else  /* If Loopback not set just update */
++       {
++       CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
++       }
++     }
++    if(DBG(0))
++      dbgPrintf("[halMacControlSet]MacControl:%08X\n", CPMAC_MACCONTROL(HalDev->dev_base));
++  }
++static int UnicastSet(HAL_DEVICE *HalDev)
++  {
++  CPMAC_RX_UNICAST_SET(HalDev->dev_base)    = HalDev->RxUnicastSet;
++  CPMAC_RX_UNICAST_CLEAR(HalDev->dev_base)  = HalDev->RxUnicastClear;
++  return(EC_NO_ERRORS);
++  }
++
++  
++static bit32u HashGet(bit8u *Address)
++  {
++  bit32u hash;
++    bit8u  tmpval;
++    int    i;
++
++    hash = 0;
++    for( i=0; i<2; i++ )
++    {
++        tmpval = *Address++;
++        hash  ^= (tmpval>>2)^(tmpval<<4);
++        tmpval = *Address++;
++        hash  ^= (tmpval>>4)^(tmpval<<2);
++        tmpval = *Address++;
++        hash  ^= (tmpval>>6)^(tmpval);
++    }
++
++    return( hash & 0x3F );
++  }
++
++static void HashAdd(HAL_DEVICE *HalDev, bit8u *MacAddress)
++{
++  bit32u HashValue;
++  bit32u HashBit;
++
++  HashValue = HashGet(MacAddress);
++
++  if(HashValue < 32)
++    {
++    HashBit = (1 << HashValue);
++    HalDev->MacHash1 |= HashBit;
++    }
++    else
++    {
++    HashBit = (1 << (HashValue-32));
++    HalDev->MacHash2 |= HashBit;
++    }
++}
++
++static void HashDel(HAL_DEVICE *HalDev, bit8u *MacAddress)
++{
++  bit32u HashValue;
++  bit32u HashBit;
++
++  HashValue = HashGet(MacAddress);
++
++  if(HashValue < 32)
++    {
++    HashBit = (1 << HashValue);
++    HalDev->MacHash1 &= ~HashBit;
++    }
++    else
++    {
++    HashBit = (1 << (HashValue-32));
++    HalDev->MacHash2 &= ~HashBit;
++    }
++}
++
++/*  Replace with an array based on key, with a ptr to the code to do */
++/* e.g.  [enRX_PASS_CRC] = {Set, MBP_UPDATE() } */
++static void DuplexUpdate(HAL_DEVICE *HalDev)
++{
++  int base           = HalDev->dev_base;
++  PHY_DEVICE *PhyDev = HalDev->PhyDev;
++
++  if(HalDev->State <  enOpened)
++    return;
++
++   /* No Phy Condition */
++   if(HalDev->MdioConnect & _CPMDIO_NOPHY)                        /*MJH+030805*/
++   {
++       /*  No Phy condition, always linked */
++       HalDev->Linked     = 1;
++       HalDev->EmacSpeed  = 1;
++       HalDev->EmacDuplex = 1;
++       HalDev->PhyNum     = 0xFFFFFFFF;  /* No Phy Num */
++       CPMAC_MACCONTROL(base) |= FULLDUPLEX;                      /*MJH+030909*/
++       osfuncStateChange();
++       return;
++   }
++
++  if(HalDev->MacControl & CTRL_LOOPBACK)    /*  Loopback Set  */
++    {
++    HalDev->Linked = 1;
++    return;
++    }
++
++  if (HalDev->MdioConnect & _CPMDIO_LOOPBK)
++    {
++    HalDev->Linked = cpMacMdioGetLoopback(HalDev->PhyDev);
++    }
++  else
++    {
++    HalDev->Linked = cpMacMdioGetLinked(HalDev->PhyDev);
++    }
++  if (HalDev->Linked)
++    {
++     /*  Retreive Duplex and Speed and the Phy Number  */
++     if(HalDev->MdioConnect & _CPMDIO_LOOPBK)
++       HalDev->EmacDuplex = 1;
++     else
++       HalDev->EmacDuplex = cpMacMdioGetDuplex(PhyDev);
++     HalDev->EmacSpeed  = cpMacMdioGetSpeed(PhyDev);
++     HalDev->PhyNum     = cpMacMdioGetPhyNum(PhyDev);
++
++     if(HalDev->EmacDuplex)
++       CPMAC_MACCONTROL(base) |= FULLDUPLEX;
++     else
++       CPMAC_MACCONTROL(base) &= ~FULLDUPLEX;
++     if(HalDev->debug)
++        dbgPrintf("%d: Phy= %d, Speed=%s, Duplex=%s\n",HalDev->inst,HalDev->PhyNum,(HalDev->EmacSpeed)?"100":"10",(HalDev->EmacDuplex)?"Full":"Half");
++    }
++  if(HalDev->debug)
++     dbgPrintf("DuplexUpdate[%d]: MACCONTROL 0x%08X, %s\n", HalDev->inst, CPMAC_MACCONTROL(base),(HalDev->Linked)?"Linked":"Not Linked");
++}
++static void MdioSetPhyMode(HAL_DEVICE *HalDev)
++  {
++  unsigned int PhyMode;
++  /* Verify proper device state */
++  if (HalDev->State < enOpened)
++    return;
++
++  PhyMode = NWAY_AUTO|NWAY_FD100|NWAY_HD100|NWAY_FD10|NWAY_HD10;
++  if(DBG(0))
++    {
++    dbgPrintf("halSetPhyMode1: MdioConnect:%08X ,", HalDev->MdioConnect);
++    dbgPrintf("PhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
++           PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
++           PhyMode&NWAY_HD100);
++    }
++
++
++  if (  HalDev->MdioConnect & _CPMDIO_NEG_OFF)  /* ~RC3.01                */
++    PhyMode &= ~(NWAY_AUTO);                    /* Disable Auto Neg       */
++  if (!(HalDev->MdioConnect & _CPMDIO_HD))
++    PhyMode &= ~(NWAY_HD100|NWAY_HD10);         /* Cannot support HD      */
++  if (!(HalDev->MdioConnect & _CPMDIO_FD))
++    PhyMode &= ~(NWAY_FD100|NWAY_FD10);         /* Cannot support FD      */
++  if (!(HalDev->MdioConnect & _CPMDIO_10))
++    PhyMode &= ~(NWAY_HD10|NWAY_FD10);          /* Cannot support 10 Mbs  */
++  if (!(HalDev->MdioConnect & _CPMDIO_100))
++    PhyMode &= ~(NWAY_HD100|NWAY_FD100);        /* Cannot support 100 Mbs */
++
++  if(HalDev->MdioConnect & _CPMDIO_AUTOMDIX)   PhyMode |= NWAY_AUTOMDIX; /* Set AutoMdix */
++
++  if (HalDev->CpmacFrequency <= 50000000)
++    PhyMode &= ~(NWAY_FD100|NWAY_HD100); /* Cannot support 100 MBS */
++  if(DBG(7))
++    dbgPrintf("halNeg: PhyMode[0x%08X] %d\n", HalDev->dev_base, PhyMode);
++
++  if(DBG(0))
++    {
++    dbgPrintf("halSetPhyMode2: MdioConnect:%08X ,", HalDev->MdioConnect);
++    dbgPrintf("PhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
++               PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
++               PhyMode&NWAY_HD100);
++    }
++
++
++  cpMacMdioSetPhyMode(HalDev->PhyDev,PhyMode);
++  DuplexUpdate(HalDev);
++  }
++static int StatsClear(HAL_DEVICE *HalDev)
++{
++  int i;
++  MEM_PTR pStats;
++
++  scOpen(EC_CPMAC);
++
++  pStats = pCPMAC_RXGOODFRAMES(HalDev->dev_base);
++  for (i=0;i<STATS_MAX;i++)
++    {
++    *(MEM_PTR)(pStats) =  0xFFFFFFFF;
++    pStats++;
++    }
++
++  return(EC_NO_ERRORS);
++}
++static void StatsDump(HAL_DEVICE *HalDev, void *Value)
++ {
++ MEM_PTR ptrStats;
++ MEM_PTR ptrValue;
++ int i;
++ ptrStats = pCPMAC_RXGOODFRAMES(HalDev->dev_base);
++ ptrValue = (bit32u*) Value;
++ for (i=0; i<STATS_MAX; i++)
++  {
++     *ptrValue = *ptrStats;
++     if(DBG(4))
++      {
++      dbgPrintf("halStatsDump: Stat[%d:0x%08X] %d 0x%08X %d\n", i, ptrStats, *ptrStats, ptrValue, *ptrValue);
++      osfuncSioFlush();
++      }
++     ptrStats++;
++     ptrValue++;
++  }
++ }
++static void ConfigApply(HAL_DEVICE *HalDev)
++  {
++  CPMAC_RX_MAXLEN(HalDev->dev_base)          = HalDev->RxMaxLen;
++  CPMAC_RX_FILTERLOWTHRESH(HalDev->dev_base) = HalDev->RxFilterLowThresh;
++  CPMAC_RX0_FLOWTHRESH(HalDev->dev_base)     = HalDev->Rx0FlowThresh;
++  UnicastSet(HalDev);
++  MacAddressSet(HalDev);
++  RxMBP_EnableSet(HalDev);
++  MacHashSet(HalDev);
++  MacControlSet(HalDev);
++  if(DBG(0))
++     dbgPrintf("ValuesUpdate[%d]: MBP_ENABLE 0x%08X\n", HalDev->inst, CPMAC_RX_MBP_ENABLE(HalDev->dev_base));
++  }
++static int halStatus(HAL_DEVICE *HalDev)
++{
++   int status;
++
++    if(HalDev->State <  enOpened)
++      return (EC_CPMAC|EC_FUNC_STATUS|EC_VAL_INVALID_STATE);      /*MJH+030805*/
++
++   /* No Phy Condition */
++   if(HalDev->MdioConnect & _CPMDIO_NOPHY)                        /*MJH+030805*/
++   {
++       /*  No Phy condition, always linked */
++       status = HalDev->Linked;
++       status |= CPMAC_STATUS_LINK_DUPLEX;
++       status |= CPMAC_STATUS_LINK_SPEED;
++       return(status);
++   }
++
++
++   if (HalDev->HostErr)  /* Adapter Check  */
++    {
++    bit32u tmp;
++    status = CPMAC_STATUS_ADAPTER_CHECK;
++    if(HalDev->MacStatus & RX_HOST_ERR_CODE)
++      {
++      status |= CPMAC_STATUS_HOST_ERR_DIRECTION;
++      tmp     = (HalDev->MacStatus & RX_HOST_ERR_CODE) >> 12; /* Code */
++      status |= (tmp << 9); /* Code */
++      tmp     = (HalDev->MacStatus & RX_ERR_CH) >> 8; /* Channel */
++      status |= (tmp << 13);
++      }
++    else
++    if(HalDev->MacStatus & TX_HOST_ERR_CODE)
++      {
++      status |= CPMAC_STATUS_HOST_ERR_DIRECTION;
++      tmp     = (HalDev->MacStatus & TX_HOST_ERR_CODE) >> 20; /* Code */
++      status |= (tmp << 9); /* Code */
++      tmp     = (HalDev->MacStatus & TX_ERR_CH) >> 16; /* Channel */
++      status |= (tmp << 13);
++      }
++    }
++   else
++    {
++    status = HalDev->Linked;
++    if(status)
++      {
++      status = CPMAC_STATUS_LINK;
++      if(cpMacMdioGetDuplex(HalDev->PhyDev))
++        status |= CPMAC_STATUS_LINK_DUPLEX;
++      if(cpMacMdioGetSpeed(HalDev->PhyDev))
++        status |= CPMAC_STATUS_LINK_SPEED;
++      }
++    }
++   if(HalDev->debug)
++      dbgPrintf("[halStatus] Link Status is %d for 0x%X\n", status, HalDev->dev_base);
++   return(status);
++}
++static int InfoAccess(HAL_DEVICE *HalDev, int Key, int Action, void *ParmValue)
++  {
++  int rc = 0;
++  int Update=0;
++
++  switch (Key)
++  {
++    /********************************************************************/
++    /*                                                                  */
++    /*                      GENERAL                                     */
++    /*                                                                  */
++    /********************************************************************/
++
++    case enVersion :
++         if(Action==enGET)
++           {
++           *(const char **)ParmValue = pszVersion_CPMAC;
++           }
++    break;
++    case enDebug  :
++         if(Action==enSET)
++           {
++           HalDev->debug = *(unsigned int *)ParmValue;
++           }
++    break;
++
++    case enStatus      :
++         if(Action==enGET)
++           {
++           int status;
++           status = halStatus(HalDev);
++           *(int *)ParmValue = status;
++           }
++    break;
++    /********************************************************************/
++    /*                                                                  */
++    /*                      RX_MBP_ENABLE                               */
++    /*                                                                  */
++    /********************************************************************/
++
++    case enRX_PASS_CRC  :
++         if(Action==enSET)
++           {
++           UPDATE_RX_PASS_CRC(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_QOS_EN  :
++         if(Action==enSET)
++           {
++           UPDATE_RX_QOS_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_NO_CHAIN :
++         if(Action==enSET)
++           {
++           UPDATE_RX_NO_CHAIN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_CMF_EN :
++         if(Action==enSET)
++           {
++           UPDATE_RX_CMF_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_CSF_EN :
++         if(Action==enSET)
++           {
++           UPDATE_RX_CSF_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_CEF_EN :
++         if(Action==enSET)
++           {
++           UPDATE_RX_CEF_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_CAF_EN :
++         if(Action==enSET)
++           {
++           UPDATE_RX_CAF_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_PROM_CH :
++         if(Action==enSET)
++           {
++           UPDATE_RX_PROM_CH(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_BROAD_EN :
++         if(Action==enSET)
++           {
++           UPDATE_RX_BROAD_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_BROAD_CH :
++         if(Action==enSET)
++           {
++           UPDATE_RX_BROAD_CH(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_MULT_EN :
++         if(Action==enSET)
++           {
++           UPDATE_RX_MULT_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_MULT_CH :
++         if(Action==enSET)
++           {
++           UPDATE_RX_MULT_CH(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++
++    /********************************************************************/
++    /*                                                                  */
++    /*                      MAC_CONTROL                                 */
++    /*                                                                  */
++    /********************************************************************/
++
++    case enTX_PTYPE :
++         if(Action==enSET)
++           {
++           UPDATE_TX_PTYPE(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enTX_PACE :
++         if(Action==enSET)
++           {
++           UPDATE_TX_PACE(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enTX_FLOW_EN :
++         if(Action==enSET)
++           {
++           UPDATE_TX_FLOW_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_FLOW_EN :
++         if(Action==enSET)
++           {
++           UPDATE_RX_FLOW_EN(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++
++    case enCTRL_LOOPBACK :
++         if(Action==enSET)
++           {
++           UPDATE_CTRL_LOOPBACK(*(unsigned int *)ParmValue);
++           Update=1;
++           }
++    break;
++    /********************************************************************/
++    /*                                                                  */
++    /*                      RX_UNICAST_SET                              */
++    /*                                                                  */
++    /********************************************************************/
++
++    case enRX_UNICAST_SET :
++         if(Action==enSET)
++          {
++           HalDev->RxUnicastSet   |=  (1 << *(unsigned int *)ParmValue);
++           HalDev->RxUnicastClear &= ~(1 << *(unsigned int *)ParmValue);
++           Update=1;
++          }
++    break;
++    case enRX_UNICAST_CLEAR :
++         if(Action==enSET)
++          {
++          HalDev->RxUnicastClear |=  (1 << *(unsigned int *)ParmValue);
++          HalDev->RxUnicastSet   &= ~(1 << *(unsigned int *)ParmValue);
++          Update=1;
++          }
++    break;
++
++    case enRX_MAXLEN :
++         if(Action==enSET)
++           {
++           HalDev->RxMaxLen    =   *(unsigned int *)ParmValue;
++           Update=1;
++           }
++    break;
++
++    case enRX_FILTERLOWTHRESH :
++         if(Action==enSET)
++           {
++           HalDev->RxFilterLowThresh  =   *(unsigned int *)ParmValue;
++           Update=1;
++           }
++    break;
++    case enRX0_FLOWTHRESH :
++         if(Action==enSET)
++           {
++           HalDev->Rx0FlowThresh =   *(unsigned int *)ParmValue;
++           Update=1;
++           }
++    break;
++    /********************************************************************/
++    /*                                                                  */
++    /*                      RX_MULTICAST                                */
++    /*                                                                  */
++    /********************************************************************/
++
++    case enRX_MULTICAST :
++    break;
++    case enRX_MULTI_SINGLE :
++         if(DBG(11))
++          {
++           int tmpi;
++           bit8u *MacAddress;
++           MacAddress = (bit8u *) ParmValue;
++           dbgPrintf("CPMAC[%X]:  MacAddress '", HalDev->dev_base);
++           for (tmpi=0; tmpi<6; tmpi++)
++             dbgPrintf("%02X:", MacAddress[tmpi]);
++             dbgPrintf("\n");
++          }
++         if(Action==enCLEAR)
++           {
++           HashDel(HalDev, ParmValue);
++           Update=1;
++           }
++         else
++         if(Action==enSET)
++           {
++           HashAdd(HalDev, ParmValue);
++           Update=1;
++           }
++    break;
++    case enRX_MULTI_ALL :
++         if(Action==enCLEAR)
++           {
++           HalDev->MacHash1 = 0;
++           HalDev->MacHash2 = 0;
++           Update=1;
++           }
++         else
++         if(Action==enSET)
++           {
++           HalDev->MacHash1 = 0xFFFFFFFF;
++           HalDev->MacHash2 = 0xFFFFFFFF;
++           Update=1;
++           }
++    break;
++
++    /********************************************************************/
++    /*                                                                  */
++    /*                      MDIO                                        */
++    /*                                                                  */
++    /********************************************************************/
++
++    case enMdioConnect :
++         if(Action==enSET)
++           {
++           HalDev->MdioConnect = *(unsigned int *)ParmValue;
++           MdioSetPhyMode(HalDev);
++           }
++           if(Action==enGET)
++           {
++           *(unsigned int *)ParmValue = HalDev->MdioConnect;
++           }
++    break;
++
++
++    /********************************************************************/
++    /*                                                                  */
++    /*                      STATISTICS                                  */
++    /*                                                                  */
++    /********************************************************************/
++    case enStatsClear :
++           StatsClear(HalDev);
++    break;
++    case enStatsDump :
++         if(Action==enGET)
++           {
++           StatsDump(HalDev, ParmValue);
++           }
++    break;
++
++/*  Not implemented
++    case enStats1 :
++         if(Action==enGET)
++           {
++           StatsGet(HalDev, ParmValue, 1);
++           }
++    break;
++
++    case enStats2 :
++         if(Action==enGET)
++           {
++           StatsGet(HalDev, ParmValue, 2);
++           }
++    break;
++    case enStats3 :
++         if(Action==enGET)
++           {
++           StatsGet(HalDev, ParmValue, 3);
++           }
++    break;
++    case enStats4 :
++         if(Action==enGET)
++           {
++           StatsGet(HalDev, ParmValue, 4);
++           }
++    break;
++
++*/
++
++    default:
++    rc = EC_CPMAC|EC_FUNC_OPTIONS|EC_VAL_KEY_NOT_FOUND;
++    break;
++  }
++
++  /* Verify proper device state */
++  if (HalDev->State == enOpened)
++    switch (Update)
++      {
++      case 1 :
++           ConfigApply(HalDev);
++      break;
++      default:
++      break;
++      }
++
++  return (rc);
++  }
++static const char pszStats[]       = "Stats;";
++
++static int halControl(HAL_DEVICE *HalDev, const char *pszKey, const char *pszAction, void *Value)
++  {
++  int i;
++  int rc=0;
++  int Action;
++  int ActionFound;
++  int KeyFound;
++
++#ifdef __CPHAL_DEBUG
++  if (DBG(1))
++    {
++    dbgPrintf("\nhalControl-HalDev:%08X,Action:%s,Key:%s\n", (bit32u)HalDev, pszAction, pszKey);
++    }
++#endif
++
++  /* 23Aug04 - BCIL needs to set Mac Address  */
++  if(HalDev->OsFunc->Strcmpi(pszKey, pszMacAddr) == 0)
++    {
++    KeyFound=1;
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
++      {
++        unsigned char *MacAddr;  
++        MacAddr = (unsigned char *) Value;  
++        MacAddressSave(HalDev, MacAddr); 
++        MacAddressSet(HalDev);       
++        return(0);
++      }
++    else
++      {
++       return(-1);
++      }
++    }
++     
++  if(HalDev->OsFunc->Strcmpi(pszKey, hcLinked) == 0)
++    {
++    KeyFound=1;
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
++      {
++        HalDev->Linked = *(int *)Value;
++        return(0);
++      }
++    else
++      {
++       return(-1);
++      }
++    }
++  
++  if(HalDev->OsFunc->Strcmpi(pszKey, "TxIntDisable") == 0)
++    {
++    KeyFound=1;
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
++      {
++        HalDev->TxIntDisable = *(int *)Value;
++        if(HalDev->TxIntDisable && (HalDev->State == enOpened))
++          {
++              /* if Opened and need TxIntDisabled, clear Ints for Channel 0 */
++              CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = 1;             
++          }        
++        return(0);
++      }
++    else
++      {
++       return(-1);
++      }
++    }
++
++  if(HalDev->OsFunc->Strcmpi(pszKey, hcPhyAccess) == 0)
++    {
++    bit32u RegAddr;
++    bit32u PhyNum;
++    bit32u Data;
++    bit32u ValueIn;
++
++    ValueIn = *(bit32u*) Value;
++
++    KeyFound=1;
++    /* Cannot access MII if not opended */
++
++    if(HalDev->State < enOpened)
++      return(-1);
++
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
++      {
++
++      PhyNum  = (ValueIn & 0x1F);        /* Phynum 0-32 */
++      RegAddr = (ValueIn >> 5) & 0xFF;   /* RegAddr in upper 11 bits */
++
++      *(bit32u*)Value = _mdioUserAccessRead(HalDev->PhyDev, RegAddr, PhyNum);
++
++      return(0);
++      } /* end of hcGet */
++
++
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
++      {
++      PhyNum  = (ValueIn & 0x1F);        /* Phynum 0-32 */
++      RegAddr = (ValueIn >> 5) & 0xFF;   /* RegAddr in upper 11 bits of lower 16 */
++
++      Data    = ValueIn >> 16;           /* Data store in upper 16 bits */
++
++      _mdioUserAccessWrite(HalDev->PhyDev, RegAddr, PhyNum, Data);
++      return(0);
++      }
++    } /*  End of hcPhyAccess */
++
++  if(HalDev->OsFunc->Strcmpi(pszKey, hcPhyNum) == 0)
++    {
++    KeyFound=1;
++    if(!HalDev->Linked)
++      return(-1);  /* if not linked the no Phy Connected */
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
++      {
++        *(int *)Value = HalDev->PhyNum;
++      return(0);
++      }
++    }
++
++  if(HalDev->OsFunc->Strcmpi(pszKey, hcCpmacSize) == 0)
++    {
++    KeyFound=1;
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
++      {
++        *(bit32u *)Value = HalDev->CpmacSize;
++      return(0);
++      }
++    }
++
++   if(HalDev->OsFunc->Strcmpi(pszKey, hcCpmacBase) == 0)
++    {
++    KeyFound=1;
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
++      {
++        *(int *)Value = HalDev->dev_base;
++      return(0);
++      }
++    }
++
++  if(HalDev->OsFunc->Strcmpi(pszKey, hcFullDuplex) == 0)
++    {
++    KeyFound=1;
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
++      {
++        UPDATE_FULLDUPLEX(*(unsigned int *)Value);
++        if(HalDev->State == enOpened)
++           ConfigApply(HalDev);
++      return(0);
++      }
++    else
++      return(-1);
++    }
++
++  if(HalDev->OsFunc->Strcmpi(pszKey, pszDebug) == 0)
++    {
++    KeyFound=1;
++    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
++      {
++        ActionFound=1;
++        HalDev->debug = *(int *)Value;
++      }
++    }
++
++  if(HalDev->OsFunc->Strcmpi(pszKey, hcMaxFrags) == 0)
++    {
++     KeyFound=1;
++     if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
++       {
++        ActionFound=1;
++
++        if ((*(int *)Value) > 0)
++          HalDev->MaxFrags = *(int *)Value;
++         else
++          rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_VALUE);
++      }
++
++     if (HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
++       {
++        ActionFound=1;
++
++        *(int *)Value = HalDev->MaxFrags;
++       }
++    }
++
++  if(HalDev->OsFunc->Strstr(pszKey, pszStats) != 0)
++    {
++     KeyFound=1;
++     if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
++         {
++       int Level;
++       int Ch;
++       char *TmpKey = (char *)pszKey;
++       ActionFound=1;
++       TmpKey += HalDev->OsFunc->Strlen(pszStats);
++       Level   = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++       TmpKey++;
++       Ch      = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++       TmpKey++;
++       osfuncSioFlush();
++#ifdef __CPHAL_DEBUG
++  if (DBG(1))
++    {
++    dbgPrintf("\nhalControl-HalDev:%08X, Level:%d, Ch:%d\n", (bit32u)HalDev, Level, Ch);
++    }
++#endif
++         StatsGet(HalDev, (void **)Value, Level, Ch, 0);
++       osfuncSioFlush();
++         }
++    }
++
++
++  if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
++    Action = enSET;
++  else
++  if(HalDev->OsFunc->Strcmpi(pszAction, hcClear) == 0)
++    Action = enCLEAR;
++  else
++  if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
++    Action = enGET;
++  else
++    Action = enNULL;
++
++
++
++  for(i=enCommonStart+1;i<enCommonEnd;i++)
++    {
++    if(HalDev->OsFunc->Strcmpi(KeyCommon[i].strKey, pszKey)==0)
++      {
++      rc = InfoAccess(HalDev, KeyCommon[i].enKey, Action, Value);
++      }
++    }
++  for(i=enCpmacStart+1;i<enCpmacEnd;i++)
++    {
++    if(HalDev->OsFunc->Strcmpi(KeyCpmac[i].strKey, pszKey)==0)
++      {
++      rc = InfoAccess(HalDev, KeyCpmac[i].enKey, Action, Value);
++      }
++    }
++/*
++  if (KeyFound == 0)
++    rc = (EC_MODULE|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND);
++
++  if (ActionFound == 0)
++    rc = (EC_MODULE|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND);
++*/
++
++  return(rc);
++  }
++static bit32u ConfigGet(HAL_DEVICE *HalDev)
++  {
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++  char *DeviceInfo     = HalDev->DeviceInfo;
++  int i                = HalDev->inst;
++  bit32u Value;
++  int Error;
++
++  /* get the configuration parameters common to all modules */
++  Error = ConfigGetCommon(HalDev);
++  if (Error) return (EC_CPMAC|Error);
++
++  if (HalDev->debug)
++    {
++      dbgPrintf("ConfigGet: haldev:0x%08X inst:%d base:0x%08X reset:%d\n", (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
++      osfuncSioFlush();
++    }
++
++  Error = OsFunc->DeviceFindParmUint(DeviceInfo, pszMdioConnect,&Value); /*MJH+030805*/
++  if(!Error) HalDev->MdioConnect = Value;
++
++  Error = OsFunc->DeviceFindParmUint(DeviceInfo, "PhyMask",&Value);
++  if(!Error) HalDev->PhyMask = Value;
++
++  Error = OsFunc->DeviceFindParmUint(DeviceInfo, "MLink",&Value);
++  if(!Error) HalDev->MLinkMask = Value;
++
++  Error = OsFunc->DeviceFindParmUint(DeviceInfo, hcMdixMask, &Value);
++  if(!Error)
++    HalDev->MdixMask = Value;
++  else
++    HalDev->MdixMask = 0;
++
++  Error = OsFunc->DeviceFindParmUint(DeviceInfo, hcSize, &Value); /*MJH+030425*/
++  if(!Error) HalDev->CpmacSize = Value;
++
++  for(i=enCommonStart+1;i<enCommonEnd;i++)
++    {
++    Error = OsFunc->DeviceFindParmUint(DeviceInfo, KeyCommon[i].strKey, (bit32u*)&Value);
++    if(!Error)
++      {
++      InfoAccess(HalDev, KeyCommon[i].enKey, enSET, (bit32u*)&Value);
++      }
++    }
++  for(i=enCpmacStart+1;i<enCpmacEnd;i++)
++    {
++    Error = OsFunc->DeviceFindParmUint(DeviceInfo, KeyCpmac[i].strKey, (bit32u*)&Value);
++    if(!Error)
++      {
++      InfoAccess(HalDev, KeyCpmac[i].enKey, enSET, (bit32u*)&Value);
++      }
++    }
++   return (EC_NO_ERRORS);
++  }
++
++
++static void ConfigInit(HAL_DEVICE *HalDev)
++  {
++  if(HalDev->inst == 0)
++    {
++     HalDev->dev_base  = 0xA8610000;
++     HalDev->ResetBit  = 17;
++     HalDev->interrupt = 19;
++     HalDev->MLinkMask = 0;
++     HalDev->PhyMask   = 0xAAAAAAAA;
++    }
++  else
++    {
++     HalDev->dev_base  = 0xA8612800;
++     HalDev->ResetBit  = 21;
++     HalDev->interrupt = 33;                                         /*~RC3.02*/
++     HalDev->MLinkMask = 0;
++     HalDev->PhyMask   = 0x55555555;
++    }
++  HalDev->RxMaxLen    = 1518;
++  HalDev->MaxFrags    = 2;
++  HalDev->MdioConnect = _CPMDIO_HD|_CPMDIO_FD|_CPMDIO_10|_CPMDIO_100|_CPMDIO_AUTOMDIX;
++  HalDev->debug=0xFFFFFFFF;
++  HalDev->debug=0;
++  }
++/* Shuts down the EMAC device
++ *
++ *@param HalDev EMAC instance. This was returned by halOpen()
++ *@param mode Indicates actions to tak on close.
++ <br>
++ *PARTIAL - Disable EMAC
++ <br>
++ *FULL    - Disable EMAC and call OS to free all allocated memory
++ *
++ *@retval
++ *        0 OK
++ <br>
++ *        Non-Zero Not OK
++ *
++ */
++static int halInit( HAL_DEVICE *HalDev)
++  {
++   int rc;
++
++  /* Verify proper device state */
++  if (HalDev->State != enDevFound)
++    return(EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_INVALID_STATE);
++
++  /* Configure HAL defaults */
++  ConfigInit(HalDev);
++
++  /* Retrieve HAL configuration parameters from data store */
++  rc = ConfigGet(HalDev);
++  if (rc) return (rc);
++
++  /* Updated 030403*/
++  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcCpuFrequency, hcGet, &HalDev->CpuFrequency); /*MJH+030403*/
++  if(rc)
++    HalDev->CpuFrequency = 20000000;  /*20 Mhz default */         /*MJH+030403*/
++
++  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcCpmacFrequency, hcGet, &HalDev->CpmacFrequency); /*MJH+030331*/
++  if(rc)
++    HalDev->CpmacFrequency = HalDev->CpuFrequency/2;               /*MJH~030404*/
++
++  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcMdioBusFrequency,  hcGet, &HalDev->MdioBusFrequency);  /*MJH+030402*/
++  if(rc)
++    HalDev->MdioBusFrequency = HalDev->CpmacFrequency;
++
++  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcMdioClockFrequency,  hcGet, &HalDev->MdioClockFrequency);  /*MJH+030402*/
++  if(rc)
++    HalDev->MdioClockFrequency = 2200000; /* 2.2 Mhz PITS #14 */
++
++
++  /* update device state */
++  HalDev->State = enInitialized;
++
++  /* initialize statistics */
++  StatsInit(HalDev);                                                  /* +RC3.02 */
++
++  /*                                                                  -RC3.02
++  StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
++  StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
++  StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
++  StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
++  StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
++  StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
++  StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
++  */
++
++  return(EC_NO_ERRORS);
++  }
++static int halProbe(HAL_DEVICE *HalDev)
++  {
++  int inst             = HalDev->inst;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++  int error_code;
++
++  if (HalDev->State != enConnected)
++     return (EC_CPMAC|EC_FUNC_PROBE|EC_VAL_INVALID_STATE);
++
++  if(HalDev->debug) dbgPrintf("halProbe: %d ",inst);
++
++  error_code = OsFunc->DeviceFindInfo(inst,"cpmac",&HalDev->DeviceInfo);
++
++  if(error_code)
++     return (EC_CPMAC|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND );
++
++  /* Set device state to DevFound */
++  HalDev->State = enDevFound;
++  return(EC_NO_ERRORS);
++  }
++static void ChannelConfigInit(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
++  {
++  int Ch        = HalChn->Channel;
++  int Direction = HalChn->Direction;
++  int nTxBuffers = 256;
++
++  if (Direction == DIRECTION_TX)
++    {
++    HalDev->ChData[Ch].TxNumBuffers   = nTxBuffers;
++    HalDev->ChData[Ch].TxNumQueues    = 1;
++    HalDev->ChData[Ch].TxServiceMax   = nTxBuffers/3;
++    HalDev->TxIntThreshold[Ch]        = HalDev->ChData[Ch].TxServiceMax;
++    HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
++    }
++
++  if (Direction == DIRECTION_RX)
++    {
++    HalDev->ChData[Ch].RxNumBuffers   = nTxBuffers*2;
++    HalDev->ChData[Ch].RxBufferOffset = 0;
++    HalDev->ChData[Ch].RxBufSize      = 1518;
++    HalDev->ChData[Ch].RxServiceMax   = nTxBuffers/3; /*Not a typo*/
++    }
++  }
++static int ChannelConfigApply(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
++  {
++   int Ch        = HalChn->Channel;
++   int Direction = HalChn->Direction;
++
++   if (DBG(11))
++     {
++      dbgPrintf("halChannelConfigApply[%d:%d] haldev:0x%08X inst:%d base:0x%08X reset:%d\n", Ch, Direction, (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
++      osfuncSioFlush();
++     }
++
++   if (Direction == DIRECTION_TX)
++   {
++     if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
++     {
++      return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_TX_CH_ALREADY_OPEN);
++     }
++
++     /* Initialize Queue Data */
++     HalDev->TxActQueueHead[Ch][0]  = 0;
++     HalDev->TxActQueueCount[Ch][0] = 0;
++     HalDev->TxActive[Ch][0]        = FALSE;
++
++     /* Need to use a macro that takes channel as input */
++     CPMAC_TX0_HDP(HalDev->dev_base)=0;
++
++     /* Initialize buffer memory for the channel */
++     InitTcb(HalDev, Ch);
++
++     if(!HalDev->TxIntDisable)
++       CPMAC_TX_INTMASK_SET(HalDev->dev_base) = (1<<Ch); /* GSG 11/22 */
++   }
++   else
++   {
++     if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
++     {
++      return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_RX_CH_ALREADY_OPEN);
++     }
++
++     /* Initialize Queue Data */
++     HalDev->RxActQueueHead[Ch]     = 0;
++     HalDev->RxActQueueCount[Ch]    = 0;
++
++     HalDev->RxActive[Ch]           = FALSE;
++
++     /* Need to use a macro that takes channel as input */
++     CPMAC_RX0_HDP(HalDev->dev_base)=0;
++
++     /* Initialize buffer memory for the channel */
++     InitRcb(HalDev, Ch);
++
++     CPMAC_RX_INTMASK_SET(HalDev->dev_base)  = (1<<Ch); /* GSG 11/22 */
++   }
++
++   HalDev->ChIsOpen[Ch][Direction] = TRUE; /* channel is open */
++
++   return (EC_NO_ERRORS);
++  }
++
++/* GSG 11/22
++ * Retrieves channel parameters from configuration file.  Any parameters
++ * which are not found are ignored, and the HAL default value will apply,
++ * unless a new value is given through the channel structure in the call
++ * to ChannelSetup.
++ */
++static int ChannelConfigGet(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
++  {
++  int Ch        = HalChn->Channel;
++  int Direction = HalChn->Direction;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++  unsigned int rc, Value;
++  void *ChInfo;
++
++   rc=OsFunc->DeviceFindParmValue(HalDev->DeviceInfo, channel_names[Ch], &ChInfo);
++   /*  Do not fail if Channel Info not available for RC2 */
++   if (rc) return(0);
++/*   if (rc) return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_CH_INFO_NOT_FOUND);*/
++
++   /* i don't care if a value is not found because they are optional */
++   if(Direction == DIRECTION_TX)
++     {
++     rc=OsFunc->DeviceFindParmUint(ChInfo, "TxNumBuffers", &Value);
++     if (!rc) HalDev->ChData[Ch].TxNumBuffers = Value;
++
++     /*rc=OsFunc->DeviceFindParmUint(ChInfo, "TxNumQueues", &Value);*/ /*MJH-030329*/
++     /*if (!rc) HalDev->ChData[Ch].TxNumQueues = Value;*/              /*MJH-030329*/
++
++     rc=OsFunc->DeviceFindParmUint(ChInfo, "TxServiceMax", &Value);
++     if (!rc) 
++       {
++         HalDev->ChData[Ch].TxServiceMax = Value;
++         HalDev->TxIntThreshold[Ch]      = HalDev->ChData[Ch].TxServiceMax;
++         HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
++       }
++     }
++   if(Direction == DIRECTION_RX)
++     {
++     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxNumBuffers", &Value);
++     if (!rc) HalDev->ChData[Ch].RxNumBuffers = Value;
++
++     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxBufferOffset", &Value);
++     if (!rc) HalDev->ChData[Ch].RxBufferOffset = Value;
++
++     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxBufSize", &Value);
++     if (!rc) HalDev->ChData[Ch].RxBufSize = Value;
++
++     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxServiceMax", &Value);
++     if (!rc) HalDev->ChData[Ch].RxServiceMax = Value;
++     }
++   return (EC_NO_ERRORS);
++  }
++#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
++
++static void ChannelConfigUpdate(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
++  {
++  int Ch        = HalChn->Channel;
++  int Direction = HalChn->Direction;
++#ifdef __CPHAL_DEBUG
++  if (DBG(1))
++    {
++    dbgPrintf("\nChnUpd-HalDev:%08X,Chn:%d:%d\n", (bit32u)HalDev, Ch, Direction); osfuncSioFlush();
++    }
++#endif
++  if (Direction == DIRECTION_TX)
++    {
++    ChannelUpdate(TxNumBuffers);
++    /*ChannelUpdate(TxNumQueues);*/                               /*MJH~030329*/
++    ChannelUpdate(TxServiceMax);
++    HalDev->TxIntThreshold[Ch]        = HalDev->ChData[Ch].TxServiceMax;
++    HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
++    }
++  else
++  if (Direction == DIRECTION_RX)
++    {
++    ChannelUpdate(RxBufferOffset);
++    ChannelUpdate(RxBufSize);
++    ChannelUpdate(RxNumBuffers);
++    ChannelUpdate(RxServiceMax);
++#ifdef __CPHAL_DEBUG
++  if (DBG(1))
++    {
++    dbgPrintf("\nRxNumBuffers %d\n",HalChn->RxNumBuffers); osfuncSioFlush();
++    }
++#endif
++    }
++  }
++static int halChannelSetup(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn, OS_SETUP *OsSetup)
++  {
++  int Direction;
++  int Ch;
++  int rc;
++
++  /* Verify proper device state */
++  if (HalDev->State < enInitialized)
++    return (EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE);
++
++  /* We require the channel structure to be passed, even if it only contains
++     the channel number */
++  if (HalChn == NULL)
++    {
++     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_NULL_CH_STRUCT);
++    }
++
++  Ch        = HalChn->Channel;
++  Direction = HalChn->Direction;
++
++  /* This should check on Maximum Channels for RX or TX,
++     they might be different Mick 021124 */
++  if ((Ch < 0) || (Ch > (MAX_CHAN-1)))
++    {
++     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_INVALID_CH);
++    }
++
++  /* if channel is already open, this call is invalid */
++  if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
++    {
++     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
++    }
++
++  /* channel is closed, but might be setup.  If so, reopen the hardware channel. */
++  if (HalDev->ChIsSetup[Ch][Direction] == FALSE)
++    {
++     /* Setup channel configuration */
++     HalDev->ChData[Ch].Channel = Ch;
++
++     /* Store OS_SETUP */
++     HalDev->ChData[Ch].OsSetup = OsSetup;
++
++     /*  Framework :
++         Set Default Values
++         Update with options.conf
++     Apply driver updates
++     */
++     ChannelConfigInit(HalDev, HalChn);
++     ChannelConfigGet(HalDev, HalChn);
++     ChannelConfigUpdate(HalDev, HalChn);
++
++     /* cppi.c needs to use Rx/TxServiceMax */
++     HalDev->BuffersServicedMax  = 169;  /* TEMP */
++
++     HalDev->ChIsSetup[Ch][Direction] = TRUE;
++    }
++
++  rc = EC_NO_ERRORS;
++
++  /* If the hardware has been opened (is out of reset), then configure the channel
++     in the hardware. NOTE: ChannelConfigApply calls the CPSAR ChannelSetup()! */
++  if (HalDev->State == enOpened)
++    {
++     rc = ChannelConfigApply(HalDev, HalChn);
++    }
++
++  return (rc);
++  }
++
++
++static int miiInfoGet(HAL_DEVICE *HalDev, bit32u *miiBaseAddress, bit32u *miiResetBit)
++  {
++  int rc;
++  void *DeviceInfo;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++
++  /*  Only one instance of cpmdio   */
++  rc = OsFunc->DeviceFindInfo(0,"cpmdio",&DeviceInfo);               /*~RC3.02*/
++
++  if(rc)
++     return (EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_DEVICE_NOT_FOUND );
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",miiBaseAddress);
++  if(rc)
++      rc=EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_NO_BASE;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",miiResetBit);
++  if(rc)
++      rc=EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_NO_BASE;
++
++
++  /* See if need to make mdio functional in GPIO */
++  gpioCheck(HalDev, DeviceInfo);
++
++  if(DBG(0))
++    dbgPrintf("miiBase: 0x%08X %u\n", *miiBaseAddress, *miiResetBit);
++  return(rc);
++  }
++static void ephyCheck(HAL_DEVICE *HalDev)
++  {                                                                  /*+RC3.02*/
++  int rc;
++  void *DeviceInfo;
++  int mii_phy;
++  int reset_bit;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++
++  rc = OsFunc->DeviceFindInfo(0,"ephy",&DeviceInfo);
++  if(rc) return;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "mii_phy",&mii_phy);
++  if(rc) return;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
++  if(rc) return;
++
++  if (HalDev->PhyMask & (1 << mii_phy))
++    {
++    *(volatile bit32u *)(HalDev->ResetBase) |=  (1 << reset_bit);                      /*+RC3.02*/
++    resetWait(HalDev);
++    }
++  }                                                                  /*+RC3.02*/
++static void AutoNegotiate(HAL_DEVICE *HalDev)
++  {
++  int size;
++  bit32u ModID,  RevMaj,  RevMin;
++  PHY_DEVICE *PhyDev;
++  bit32u miiBaseAddress;
++  bit32u miiResetBit;
++
++  /* Verify proper device state */
++  if (HalDev->State < enOpened)
++    return;
++
++  miiInfoGet(HalDev, &miiBaseAddress, &miiResetBit);
++
++  cpMacMdioGetVer(miiBaseAddress, &ModID,  &RevMaj,  &RevMin);
++  if(HalDev->debug)
++     dbgPrintf("Mdio Module Id %d, Version %d.%d\n", ModID,  RevMaj,  RevMin);
++
++  size = cpMacMdioGetPhyDevSize();
++  PhyDev = (PHY_DEVICE *) HalDev->OsFunc->Malloc( size );
++
++  HalDev->PhyDev = PhyDev;
++
++  ephyCheck(HalDev);
++
++  cpMacMdioInit( PhyDev, miiBaseAddress, HalDev->inst, HalDev->PhyMask, HalDev->MLinkMask, HalDev->MdixMask, HalDev->ResetBase, miiResetBit, HalDev->MdioBusFrequency, HalDev->MdioClockFrequency, HalDev->debug, HalDev); /*MJH~030402*/
++  MdioSetPhyMode(HalDev);
++
++  return;
++  }
++static int halOpen(HAL_DEVICE *HalDev)
++  {
++  unsigned char *MacAddr;
++  int i;
++  int j;
++  int rc, Ticks;
++
++  if (HalDev->debug)
++    {
++      dbgPrintf("halOpen: haldev:0x%08X inst:%d base:0x%08X reset:%d\n", (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
++      osfuncSioFlush();
++    }
++
++   /* Verify proper device state */
++   if (HalDev->State < enInitialized)
++     return (EC_CPMAC|EC_FUNC_OPEN|EC_VAL_INVALID_STATE);
++
++
++  /* take CPMAC out of reset - GSG 11/20*/
++  if ((VOLATILE32(HalDev->ResetBase) & (1 << HalDev->ResetBit)) != 0)
++    {
++     /* perform normal close duties */
++     CPMAC_MACCONTROL(HalDev->dev_base) &= ~MII_EN;
++     CPMAC_TX_CONTROL(HalDev->dev_base) &= ~TX_EN;
++     CPMAC_RX_CONTROL(HalDev->dev_base) &= ~RX_EN;
++
++     /* disable interrupt masks */
++     CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = 0xFF;
++     CPMAC_RX_INTMASK_CLEAR(HalDev->dev_base) = 0xFF;
++    }
++
++   /* take CPMAC out of reset */
++   *(volatile bit32u *)(HalDev->ResetBase) &= ~(1 << HalDev->ResetBit);
++   resetWait(HalDev);
++   *(volatile bit32u *)(HalDev->ResetBase) |=  (1 << HalDev->ResetBit);
++   resetWait(HalDev);
++
++  /* After Reset clear the Transmit and Receive DMA Head Descriptor Pointers */
++
++  CPMAC_TX0_HDP(HalDev->dev_base)=0;
++  CPMAC_TX1_HDP(HalDev->dev_base)=0;
++  CPMAC_TX2_HDP(HalDev->dev_base)=0;
++  CPMAC_TX3_HDP(HalDev->dev_base)=0;
++  CPMAC_TX4_HDP(HalDev->dev_base)=0;
++  CPMAC_TX5_HDP(HalDev->dev_base)=0;
++  CPMAC_TX6_HDP(HalDev->dev_base)=0;
++  CPMAC_TX7_HDP(HalDev->dev_base)=0;
++
++  /* Rx Init  */
++
++  CPMAC_RX0_HDP(HalDev->dev_base) = 0;
++  CPMAC_RX1_HDP(HalDev->dev_base) = 0;
++  CPMAC_RX2_HDP(HalDev->dev_base) = 0;
++  CPMAC_RX3_HDP(HalDev->dev_base) = 0;
++  CPMAC_RX4_HDP(HalDev->dev_base) = 0;
++  CPMAC_RX5_HDP(HalDev->dev_base) = 0;
++  CPMAC_RX6_HDP(HalDev->dev_base) = 0;
++  CPMAC_RX7_HDP(HalDev->dev_base) = 0;
++
++  CPMAC_RX_BUFFER_OFFSET(HalDev->dev_base) = 0;
++
++  /* Init Tx and Rx DMA */
++
++  CPMAC_TX_CONTROL(HalDev->dev_base) |= TX_EN;
++  CPMAC_RX_CONTROL(HalDev->dev_base) |= RX_EN;
++
++  CPMAC_MAC_INTMASK_SET(HalDev->dev_base) |=2; /* Enable Adaptercheck Ints */
++  HalDev->OsFunc->Control(HalDev->OsDev, pszMacAddr, hcGet, &MacAddr); /* GSG 11/22 */
++  MacAddressSave(HalDev, MacAddr);
++
++  HalDev->HostErr = 0;      /* Clear Adapter Check indicator */
++  HalDev->State = enOpened; /* Change device state */
++
++  /* Start MDIO Negotiation */
++  AutoNegotiate(HalDev);
++
++  /*  Enable the Os Timer  */
++  Ticks = HalDev->CpuFrequency / 100;  /*  10 milli-secs */       /*MJH~030402*/
++  HalDev->OsFunc->Control(HalDev->OsDev, pszTick, hcSet, &Ticks); /* GSG 11/22 */
++  HalDev->OsFunc->IsrRegister(HalDev->OsDev, halIsr, HalDev->interrupt);
++
++  /* GSG +030523 Malloc space for the Rx fraglist */
++  HalDev->fraglist = HalDev->OsFunc->Malloc(HalDev->MaxFrags * sizeof(FRAGLIST));
++
++  /* Any pre-open configuration */
++
++  /* For any channels that have been pre-initialized, set them up now */
++  /* Note : This loop should not use MAX_CHN, it should only
++            loop through Channels Setup, memory should not be reserved
++            until Channel is Setup
++  */
++  for(i=0; i<MAX_CHAN; i++) /* i loops through Channels */
++  for(j=0; j<2; j++)        /* j loops through DIRECTION values, 0 and 1  */
++    {
++     if(HalDev->ChIsSetup[i][j]==TRUE)   /* If the Channel and Direction have been Setup */
++       if(HalDev->ChIsOpen[i][j]==FALSE) /* but not opened, then Apply Values now */
++         {
++          CHANNEL_INFO HalChn;
++          HalChn.Channel   = i;
++          HalChn.Direction = j;
++          rc = ChannelConfigApply(HalDev, &HalChn);
++          if(rc != EC_NO_ERRORS)
++            return(rc);
++         }
++    }  /* End of looping through Channel/Direction */
++
++  ConfigApply(HalDev);  /* Apply Configuration Values to Device */
++  CPMAC_MACCONTROL(HalDev->dev_base) |= MII_EN;  /* MAC_EN */
++  if(DBG(0))
++     dbgPrintf("[halOpen]MacControl:%08X\n", CPMAC_MACCONTROL(HalDev->dev_base));
++  return(EC_NO_ERRORS);
++  }
++
++#define INT_PENDING (MAC_IN_VECTOR_TX_INT_OR | MAC_IN_VECTOR_RX_INT_OR | MAC_IN_VECTOR_HOST_INT)
++static int halShutdown(HAL_DEVICE *HalDev)
++  {
++   int Ch, Queue;                                                  /*GSG+030514*/
++
++   /* Verify proper device state */
++   if (HalDev->State == enOpened)
++     halClose(HalDev, 3); /* GSG ~030429 */
++
++   /* Buffer/descriptor resources may still need to be freed if a Close
++      Mode 1 was performed prior to Shutdown - clean up here */    /*GSG+030514*/
++   for (Ch=0; Ch<MAX_CHAN; Ch++)
++     {
++      if (HalDev->RcbStart[Ch] != 0)
++        FreeRx(HalDev,Ch);
++
++      for(Queue=0; Queue<MAX_QUEUE; Queue++)
++        {
++         if (HalDev->TcbStart[Ch][Queue] != 0)
++           FreeTx(HalDev,Ch,Queue);
++        }
++     }
++
++   /* free the HalFunc */
++   HalDev->OsFunc->Free(HalDev->HalFuncPtr);
++
++   /* free the HAL device */
++   HalDev->OsFunc->Free(HalDev);
++
++   return(EC_NO_ERRORS);
++  }
++int halIsr(HAL_DEVICE *HalDev, int *MorePackets)
++{
++  bit32u IntVec;
++  int Serviced;
++  int PacketsServiced=0;
++  int Channel;
++  int TxMorePackets=0;
++  int RxMorePackets=0;
++
++  /* Verify proper device state - important because a call prior to Open would
++      result in a lockup */
++  if (HalDev->State != enOpened)
++     return(EC_CPMAC|EC_FUNC_DEVICE_INT|EC_VAL_INVALID_STATE);
++
++  IntVec = CPMAC_MAC_IN_VECTOR(HalDev->dev_base);
++
++#ifdef __CPHAL_DEBUG
++  if (DBG(0))
++    {
++    dbgPrintf("\nhalIsr: inst %d, IntVec 0x%X\n", HalDev->inst, IntVec); osfuncSioFlush();/* GSG 11/22 */
++    }
++#endif
++
++  HalDev->IntVec = IntVec;
++  if (IntVec & MAC_IN_VECTOR_TX_INT_OR)
++   {
++     int TxServiceMax=0;  /* Compiler complains if not initialized */
++      
++     Channel = (IntVec & 0x7);
++     
++     if(HalDev->TxIntDisable)
++       {
++         CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Channel);  /* Disable Interrupt for Channel */           
++         TxServiceMax = HalDev->ChData[Channel].TxServiceMax;  
++         HalDev->ChData[Channel].TxServiceMax = 10000;             /* Need to service all packets in the Queue */
++       }      
++     
++     PacketsServiced |= TxInt(HalDev, Channel, 0, &TxMorePackets);
++     
++     if(HalDev->TxIntDisable)        
++          HalDev->ChData[Channel].TxServiceMax  = TxServiceMax;         
++    }
++  
++  if (IntVec & MAC_IN_VECTOR_RX_INT_OR)
++    {
++     Channel = (IntVec >> 8) & 0x7;
++     Serviced = RxInt(HalDev, Channel, &RxMorePackets);
++     PacketsServiced |= (Serviced<<16);
++    }
++
++  if (IntVec & MAC_IN_VECTOR_HOST_INT)
++    {
++    /* Adaptercheck */
++    HalDev->HostErr = 1;
++    HalDev->MacStatus = CPMAC_MACSTATUS(HalDev->dev_base);
++    osfuncStateChange();                                          /*MJH+030328*/
++    if(DBG(0))
++      {
++      dbgPrintf("Adaptercheck: %08x for base:%X\n",HalDev->MacStatus, (bit32u)HalDev->dev_base);
++      osfuncSioFlush();
++      }
++    }
++  *MorePackets = (TxMorePackets | RxMorePackets);
++  return (PacketsServiced);
++}
++
++int halPacketProcessEnd(HAL_DEVICE *HalDev)
++{
++  int base             = HalDev->dev_base;
++  CPMAC_MAC_EOI_VECTOR(base) = 0;
++  return(0);
++}
++
++
++
++static int PhyCheck(HAL_DEVICE *HalDev)
++  {
++      return(cpMacMdioTic(HalDev->PhyDev));
++  }
++static int halTick(HAL_DEVICE *HalDev)
++{
++    int TickChange;
++
++    if(HalDev->State <  enOpened)
++      return (EC_CPMAC|EC_FUNC_TICK|EC_VAL_INVALID_STATE);
++
++    /* if NO Phy no need to check Link */
++    if(HalDev->MdioConnect & _CPMDIO_NOPHY)
++      return(EC_NO_ERRORS);  /* No change in Phy State detected */
++
++    TickChange = PhyCheck(HalDev);
++    /* Phy State Change Detected */
++    if(TickChange == 1)
++    {
++        /*  MDIO indicated a change  */
++        DuplexUpdate(HalDev);
++        osfuncStateChange();
++        return(EC_NO_ERRORS);
++    }
++
++    /* if in AutoMdix mode, and Flip request received, inform OS */
++    if( (HalDev->MdioConnect & _CPMDIO_AUTOMDIX)  &&
++        (TickChange & _MIIMDIO_MDIXFLIP))
++    {
++       bit32u Mdix;
++       Mdix = TickChange & 0x1;   /*  Mdix mode stored in bit 0 */
++       HalDev->OsFunc->Control(HalDev->OsDev, hcMdioMdixSwitch, hcSet, &Mdix);
++       return(EC_NO_ERRORS);
++    }
++
++    return(EC_NO_ERRORS);
++}
++
++int halCpmacInitModule(HAL_DEVICE **pHalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS **pHalFunc,
++                       OS_FUNCTIONS *OsFunc, int OsFuncSize,     int *HalFuncSize, int Inst)
++  {
++    HAL_DEVICE *HalDev;
++    HAL_FUNCTIONS *HalFunc;
++
++    if (OsFuncSize < sizeof(OS_FUNCTIONS))
++      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_OS_VERSION_NOT_SUPPORTED);
++
++    HalDev = (HAL_DEVICE *) OsFunc->MallocDev(sizeof(HAL_DEVICE));
++    if (!HalDev)
++      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
++
++    /* clear the HalDev area */
++    OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
++
++    /* Initialize the size of hal functions */
++    *HalFuncSize = sizeof (HAL_FUNCTIONS);
++
++    HalFunc = (HAL_FUNCTIONS *) OsFunc->Malloc(sizeof(HAL_FUNCTIONS));
++    if (!HalFunc)
++      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
++
++    /* clear the function pointers */
++    OsFunc->Memset(HalFunc, 0, sizeof(HAL_FUNCTIONS));
++
++    HalDev->OsDev   = OsDev;
++    HalDev->OsOpen  = OsDev;
++    HalDev->inst    = Inst;
++    HalDev->OsFunc  = OsFunc;
++    HalDev->HalFunc = HalFunc;
++    /* Remove the following from cppi, replace with HalFunc */
++    HalDev->HalFuncPtr = HalFunc; /* GSG 11/20 changed name to match cppi */
++
++    /****************************************************************/
++    /*                 POPULATE HALFUNC                             */
++    /****************************************************************/
++    HalFunc->ChannelSetup     = halChannelSetup;
++    HalFunc->ChannelTeardown  = halChannelTeardown; /* GSG 11/20 */
++    HalFunc->Close            = halClose; /* GSG 11/20 */
++    HalFunc->Control          = halControl; /* GSG 11/22 */
++    HalFunc->Init             = halInit;
++    HalFunc->Open             = halOpen;
++    HalFunc->PacketProcessEnd = halPacketProcessEnd;
++    HalFunc->Probe            = halProbe;
++    HalFunc->RxReturn         = halRxReturn;
++    HalFunc->Send             = halSend;
++    HalFunc->Shutdown         = halShutdown;
++    HalFunc->Tick             = halTick;
++
++    /* HalFunc->Status        = halStatus;*/ /* GSG 11/22 */
++    /* pass the HalDev and HalFunc back to the caller */
++
++    *pHalDev  = HalDev;
++    *pHalFunc = HalFunc;
++
++    HalDev->State = enConnected;   /* Initialize the hardware state */
++
++    if (HalDev->debug) HalDev->OsFunc->Printf("halCpmacInitModule: Leave\n");
++    return(0);
++  }
++
++int cpmacRandomRange(HAL_DEVICE *HalDev, int min, int max)
++{
++    int iTmp;
++    iTmp  = cpmacRandom(HalDev);
++    iTmp %= ((max-min)+1);
++    iTmp += min;
++    return(iTmp);
++}
++
++int cpmacRandom(HAL_DEVICE *HalDev)
++{
++    int iTmp;
++    iTmp = CPMAC_BOFFTEST(HalDev->dev_base);
++    iTmp >>= 16;      /*  get rndnum field */
++    iTmp &= (0x3FF); /* field is 10 bits wide */
++    return(iTmp);
++}
+diff -urN linux.old/drivers/net/avalanche_cpmac/hcpmac.h linux.dev/drivers/net/avalanche_cpmac/hcpmac.h
+--- linux.old/drivers/net/avalanche_cpmac/hcpmac.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/hcpmac.h	2005-07-12 02:48:42.175574000 +0200
+@@ -0,0 +1,383 @@
++/** @file***********************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE:
++ *
++ *  DESCRIPTION:
++ *      This file contains definitions for the HAL EMAC API
++ *
++ *  HISTORY:
++ *  xxXxx01 Denis      1.00  Original Version created.
++ *  22Jan02 Denis/Mick 1.01  Modified for HAL EMAC API
++ *  24Jan02 Denis/Mick 1.02  Speed Improvements
++ *  28Jan02 Denis/Mick 1.16  Made function calls pointers
++ *  28Jan02 Mick       1.18  Split into separate modules
++ *  @author Michael Hanrahan
++ *  @version 1.02
++ *  @date    24-Jan-2002
++ *****************************************************************************/
++#ifndef _INC_HCPMAC
++#define _INC_HCPMAC
++
++/** \namespace CPMAC_Version
++This documents version 01.07.04 of the CPMAC CPHAL.
++*/
++const char *pszVersion_CPMAC="CPMAC 01.07.08 "__DATE__" "__TIME__;
++
++/* CHECK THESE LOCATIONS */
++#define TEARDOWN_VAL       0xfffffffc
++#define CB_OFFSET_MASK     0xFFFF0000
++
++
++#define MAX_CHAN 8
++#define MAX_QUEUE 1
++
++typedef struct
++  {
++  bit32 HNext;      /*< Hardware's pointer to next buffer descriptor  */
++  bit32 BufPtr;     /*< Pointer to the data buffer                    */
++  bit32 Off_BLen;   /*< Contains buffer offset and buffer length      */
++  bit32 mode;       /*< SOP, EOP, Ownership, EOQ, Teardown, Q Starv, Length */
++  void *Next;
++  void *OsInfo;
++  void *Eop;
++#ifdef __CPHAL_DEBUG
++  bit32 DbgSop;
++  bit32 DbgData;
++  bit32 DbgFraglist;
++#endif
++  }HAL_TCB;
++
++typedef volatile struct hal_private
++  {
++  bit32 HNext;      /*< Hardware's pointer to next buffer descriptor     */
++  bit32 BufPtr;     /*< Pointer to the data buffer                       */
++  bit32 Off_BLen;   /*< Contains buffer offset and buffer length         */
++  bit32 mode;       /*< SOP, EOP, Ownership, EOQ, Teardown Complete bits */
++  void *DatPtr;
++  void *Next;
++  void *OsInfo;
++  void *Eop;
++  }HAL_RCB;
++
++#define MAX_NEEDS 512                                             /*MJH+030409*/
++/*  HAL  */
++
++typedef struct hal_device
++  {
++  OS_DEVICE *OsDev;
++  OS_FUNCTIONS *OsFunc;
++    /*OS_SETUP *OsSetup;*/                                     /* -GSG 030508 */
++  int inst;
++  bit32u rxbufseq;
++
++
++  bit32 dev_base;
++  bit32  offset;
++
++  bit32u ResetBase; /* GSG 10/20 */
++  int ResetBit;
++  void *OsOpen;
++  bit32u IntVec;
++  PHY_DEVICE *PhyDev;
++  bit32u EmacDuplex;
++  bit32u EmacSpeed;
++  bit32u PhyNum;
++  bit32u MLinkMask;
++  bit32u PhyMask;
++  bit32u MdixMask;
++
++  bit32u Linked;
++  DEVICE_STATE State;
++  unsigned char *MacAddr;
++  HAL_FUNCTIONS *HalFuncPtr; /* GSG 11/20 changed name to match cppi */
++  HAL_FUNCTIONS *HalFunc;
++/*  unsigned int CpuFreq;*/                                       /*MJH-030402*/
++  unsigned int MdioConnect;
++  unsigned int HostErr;
++
++/************************************************************************/
++/*                                                                      */
++/*      R E G I S T E R S                                               */
++/*                                                                      */
++/************************************************************************/
++
++  bit32u RxMbpEnable;
++  bit32u RxUnicastSet;
++  bit32u RxUnicastClear;
++  bit32u RxMaxLen;
++  bit32u RxFilterLowThresh;
++  bit32u Rx0FlowThresh;
++  bit32u MacControl;
++  bit32u MacStatus;
++  bit32u MacHash1;
++  bit32u MacHash2;
++
++/************************************************************************/
++/*                                                                      */
++/*      O P T I O N S                                                   */
++/*                                                                      */
++/************************************************************************/
++
++  char *DeviceInfo;
++  bit32u interrupt;
++
++
++  bit32u RxPassCrc;
++  bit32u RxCaf;
++  bit32u RxCef;
++  bit32u RxBcast;
++  bit32u RxBcastCh;
++  HAL_RCB *RcbPool[MAX_CHAN];
++  bit32 RxActQueueCount[MAX_CHAN];
++  HAL_RCB *RxActQueueHead[MAX_CHAN];
++  HAL_RCB *RxActQueueTail[MAX_CHAN];
++  bit32 RxActive[MAX_CHAN];
++  HAL_TCB *TcbPool[MAX_CHAN][MAX_QUEUE];
++  bit32 TxActQueueCount[MAX_CHAN][MAX_QUEUE];
++  HAL_TCB *TxActQueueHead[MAX_CHAN][MAX_QUEUE];
++  HAL_TCB *TxActQueueTail[MAX_CHAN][MAX_QUEUE];
++  bit32 TxActive[MAX_CHAN][MAX_QUEUE];
++  bit32 TxTeardownPending[MAX_CHAN];
++  bit32 RxTeardownPending[MAX_CHAN];
++  bit32 ChIsOpen[MAX_CHAN][2];
++  bit32 ChIsSetup[MAX_CHAN][2];
++  FRAGLIST *fraglist;
++  char *TcbStart[MAX_CHAN][MAX_QUEUE];
++  char *RcbStart[MAX_CHAN];
++  bit32 RcbSize[MAX_CHAN];
++/*  STAT_INFO Stats;  */
++  bit32  Inst;
++  bit32u BuffersServicedMax;
++  CHANNEL_INFO ChData[MAX_CHAN];
++  bit32u MdioClockFrequency;                                      /*MJH+030402*/
++  bit32u MdioBusFrequency;                                        /*MJH+030402*/
++  bit32u CpuFrequency;                                            /*MJH+030402*/
++  bit32u CpmacFrequency;                                          /*MJH+030403*/
++  bit32u CpmacSize;                                               /*MJH+030425*/
++  int debug;
++  bit32u NeedsCount;                                              /*MJH+030409*/
++  HAL_RECEIVEINFO *Needs[MAX_NEEDS];                              /*MJH+030409*/
++  int MaxFrags;
++  int TxIntThreshold[MAX_CHAN];                   /* MJH 040621  NSP Performance Update */
++  int TxIntThresholdMaster[MAX_CHAN];             /* MJH 040827  NSP Performance Update */
++  int TxIntDisable;                     /* MJH 040621  NSP Performance Update */  
++  }HALDEVICE;
++
++#define STATS_MAX 36
++
++#define MACCONTROL_MASK    (TX_PTYPE|TX_PACE|TX_FLOW_EN|RX_FLOW_EN|CTRL_LOOPBACK)
++#define RX_MBP_ENABLE_MASK                                       \
++        (RX_PASS_CRC|RX_QOS_EN|RX_NO_CHAIN|                      \
++         RX_CMF_EN|RX_CSF_EN|RX_CEF_EN|RX_CAF_EN|RX_PROM_CH_MASK|     \
++         RX_BROAD_EN|RX_BROAD_CH_MASK|RX_MULT_EN|RX_MULT_CH_MASK)
++
++
++#define MBP_UPDATE(Mask, On)                      \
++         if(On)   HalDev->RxMbpEnable |=  Mask;   \
++         else     HalDev->RxMbpEnable &= ~Mask
++
++#define CONTROL_UPDATE(Mask, On)                  \
++         if(On)   HalDev->MacControl |=  Mask;    \
++         else     HalDev->MacControl &= ~Mask
++
++
++#define UPDATE_TX_PTYPE(Value)       CONTROL_UPDATE(TX_PTYPE,Value)
++#define UPDATE_TX_PACE(Value)        CONTROL_UPDATE(TX_PACE,Value)
++#define UPDATE_MII_EN(Value)         CONTROL_UPDATE(MII_EN,Value)
++#define UPDATE_TX_FLOW_EN(Value)     CONTROL_UPDATE(TX_FLOW_EN,Value)
++#define UPDATE_RX_FLOW_EN(Value)     CONTROL_UPDATE(RX_FLOW_EN,Value)
++#define UPDATE_CTRL_LOOPBACK(Value)  CONTROL_UPDATE(CTRL_LOOPBACK,Value)
++#define UPDATE_FULLDUPLEX(Value)     CONTROL_UPDATE(FULLDUPLEX,(Value))
++
++#define UPDATE_RX_PASS_CRC(Value)    MBP_UPDATE(RX_PASS_CRC,  Value)
++#define UPDATE_RX_QOS_EN(Value)      MBP_UPDATE(RX_QOS_EN,    Value)
++#define UPDATE_RX_NO_CHAIN(Value)    MBP_UPDATE(RX_NO_CHAIN,  Value)
++#define UPDATE_RX_CMF_EN(Value)      MBP_UPDATE(RX_CMF_EN,    Value)
++#define UPDATE_RX_CSF_EN(Value)      MBP_UPDATE(RX_CSF_EN,    Value)
++#define UPDATE_RX_CEF_EN(Value)      MBP_UPDATE(RX_CEF_EN,    Value)
++#define UPDATE_RX_CAF_EN(Value)      MBP_UPDATE(RX_CAF_EN,    Value)
++#define UPDATE_RX_BROAD_EN(Value)    MBP_UPDATE(RX_BROAD_EN,  Value)
++#define UPDATE_RX_MULT_EN(Value)     MBP_UPDATE(RX_MULT_EN,   Value)
++
++#define UPDATE_RX_PROM_CH(Value)                         \
++        HalDev->RxMbpEnable &=  ~RX_PROM_CH_MASK;        \
++        HalDev->RxMbpEnable |=   RX_PROM_CH(Value)
++
++#define UPDATE_RX_BROAD_CH(Value)                        \
++           HalDev->RxMbpEnable &=  ~RX_BROAD_CH_MASK;    \
++           HalDev->RxMbpEnable |=   RX_BROAD_CH(Value)
++
++#define UPDATE_RX_MULT_CH(Value)                         \
++           HalDev->RxMbpEnable &=  ~RX_MULT_CH_MASK;     \
++           HalDev->RxMbpEnable |=   RX_MULT_CH(Value)
++
++
++
++typedef enum
++  {
++   /*  CPMAC */
++    enCpmacStart=0,
++    enStats0,
++    enStats1,
++    enStats2,
++    enStats3,
++    enStats4,
++    enStatsDump,
++    enStatsClear,
++    enRX_PASS_CRC,
++    enRX_QOS_EN,
++    enRX_NO_CHAIN,
++    enRX_CMF_EN,
++    enRX_CSF_EN,
++    enRX_CEF_EN,
++    enRX_CAF_EN,
++    enRX_PROM_CH,
++    enRX_BROAD_EN,
++    enRX_BROAD_CH,
++    enRX_MULT_EN,
++    enRX_MULT_CH,
++
++    enTX_PTYPE,
++    enTX_PACE,
++    enMII_EN,
++    enTX_FLOW_EN,
++    enRX_FLOW_EN,
++    enCTRL_LOOPBACK,
++
++    enRX_MAXLEN,
++    enRX_FILTERLOWTHRESH,
++    enRX0_FLOWTHRESH,
++    enRX_UNICAST_SET,
++    enRX_UNICAST_CLEAR,
++    enMdioConnect,
++    enMAC_ADDR_GET,
++    enTick,
++    enRX_MULTICAST,
++    enRX_MULTI_ALL,
++    enRX_MULTI_SINGLE,
++    enVersion,
++    enCpmacEnd                                   /* Last entry */
++  }INFO_KEY_CPMAC;
++
++static const char pszVersion[]                 = "Version";
++static const char pszStats0[]                  = "Stats0";
++static const char pszStats1[]                  = "Stats1";
++static const char pszStats2[]                  = "Stats2";
++static const char pszStats3[]                  = "Stats3";
++static const char pszStats4[]                  = "Stats4";
++static const char pszStatsDump[]               = "StatsDump";
++static const char pszStatsClear[]              = "StatsClear";
++
++/********************************************************************
++**
++**  RX MBP ENABLE
++**
++********************************************************************/
++static const char pszRX_PASS_CRC[]             = "RX_PASS_CRC";
++static const char pszRX_QOS_EN[]               = "RX_QOS_EN";
++static const char pszRX_NO_CHAIN[]             = "RX_NO_CHAIN";
++static const char pszRX_CMF_EN[]               = "RX_CMF_EN";
++static const char pszRX_CSF_EN[]               = "RX_CSF_EN";
++static const char pszRX_CEF_EN[]               = "RX_CEF_EN";
++static const char pszRX_CAF_EN[]               = "RX_CAF_EN";
++static const char pszRX_PROM_CH[]              = "RX_PROM_CH";
++static const char pszRX_BROAD_EN[]             = "RX_BROAD_EN";
++static const char pszRX_BROAD_CH[]             = "RX_BROAD_CH";
++static const char pszRX_MULT_EN[]              = "RX_MULT_EN";
++static const char pszRX_MULT_CH[]              = "RX_MULT_CH";
++
++
++/********************************************************************
++**
++**  MAC CONTROL
++**
++********************************************************************/
++static const char pszTX_PTYPE[]                = "TX_PTYPE";
++static const char pszTX_PACE[]                 = "TX_PACE";
++static const char pszMII_EN[]                  = "MII_EN";
++static const char pszTX_FLOW_EN[]              = "TX_FLOW_EN";
++static const char pszRX_FLOW_EN[]              = "RX_FLOW_EN";
++static const char pszCTRL_LOOPBACK[]           = "CTRL_LOOPBACK";
++
++static const char pszRX_MAXLEN[]               = "RX_MAXLEN";
++static const char pszRX_FILTERLOWTHRESH[]      = "RX_FILTERLOWTHRESH";
++static const char pszRX0_FLOWTHRESH[]          = "RX0_FLOWTHRESH";
++static const char pszRX_UNICAST_SET[]          = "RX_UNICAST_SET";
++static const char pszRX_UNICAST_CLEAR[]        = "RX_UNICAST_CLEAR";
++static const char pszMdioConnect[]             = "MdioConnect";
++static const char pszMacAddr[]                 = "MacAddr";
++static const char pszTick[]                    = "Tick";
++
++/********************************************************************
++**
++**  MULTICAST
++**
++********************************************************************/
++
++static const char pszRX_MULTICAST[]            = "RX_MULTICAST";
++static const char pszRX_MULTI_ALL[]            = "RX_MULTI_ALL";
++static const char pszRX_MULTI_SINGLE[]         = "RX_MULTI_SINGLE";
++
++/*
++static const char* pszGFHN = "GFHN";
++*/
++
++static const CONTROL_KEY KeyCpmac[] =
++   {
++     {""                           , enCpmacStart},
++     {pszStats0                    , enStats0},
++     {pszStats1                    , enStats1},
++     {pszStats2                    , enStats2},
++     {pszStats3                    , enStats3},
++     {pszStats4                    , enStats4},
++     {pszStatsClear                , enStatsClear},
++     {pszStatsDump                 , enStatsDump},
++     {pszRX_PASS_CRC               , enRX_PASS_CRC},
++     {pszRX_QOS_EN                 , enRX_QOS_EN},
++     {pszRX_NO_CHAIN               , enRX_NO_CHAIN},
++     {pszRX_CMF_EN                 , enRX_CMF_EN},
++     {pszRX_CSF_EN                 , enRX_CSF_EN},
++     {pszRX_CEF_EN                 , enRX_CEF_EN},
++     {pszRX_CAF_EN                 , enRX_CAF_EN},
++     {pszRX_PROM_CH                , enRX_PROM_CH},
++     {pszRX_BROAD_EN               , enRX_BROAD_EN},
++     {pszRX_BROAD_CH               , enRX_BROAD_CH},
++     {pszRX_MULT_EN                , enRX_MULT_EN},
++     {pszRX_MULT_CH                , enRX_MULT_CH},
++
++     {pszTX_PTYPE                  , enTX_PTYPE},
++     {pszTX_PACE                   , enTX_PACE},
++     {pszMII_EN                    , enMII_EN},
++     {pszTX_FLOW_EN                , enTX_FLOW_EN},
++     {pszRX_FLOW_EN                , enRX_FLOW_EN},
++     {pszCTRL_LOOPBACK             , enCTRL_LOOPBACK},
++     {pszRX_MAXLEN                 , enRX_MAXLEN},
++     {pszRX_FILTERLOWTHRESH        , enRX_FILTERLOWTHRESH},
++     {pszRX0_FLOWTHRESH            , enRX0_FLOWTHRESH},
++     {pszRX_UNICAST_SET            , enRX_UNICAST_SET},
++     {pszRX_UNICAST_CLEAR          , enRX_UNICAST_CLEAR},
++     {pszMdioConnect               , enMdioConnect},
++     {pszRX_MULTICAST              , enRX_MULTICAST},
++     {pszRX_MULTI_ALL              , enRX_MULTI_ALL},
++     {pszRX_MULTI_SINGLE           , enRX_MULTI_SINGLE},
++     {pszTick                      , enTick},
++     {pszVersion                   , enVersion},
++     {""                           , enCpmacEnd}
++   };
++
++const char hcCpuFrequency[]       = "CpuFreq";
++const char hcCpmacFrequency[]     = "CpmacFrequency";
++const char hcMdioBusFrequency[]   = "MdioBusFrequency";
++const char hcMdioClockFrequency[] = "MdioClockFrequency";
++const char hcCpmacBase[]          = "CpmacBase";
++const char hcPhyNum[]             = "PhyNum";
++const char hcSize[]               = "size";
++const char hcCpmacSize[]          = "CpmacSize";
++const char hcPhyAccess[]          = "PhyAccess";
++const char hcLinked[]             = "Linked";
++const char hcFullDuplex[]         = "FullDuplex";
++const char hcMdixMask[]           = "MdixMask";
++const char hcMdioMdixSwitch[]     = "MdixSet";
++#endif
+diff -urN linux.old/drivers/net/avalanche_cpmac/Makefile linux.dev/drivers/net/avalanche_cpmac/Makefile
+--- linux.old/drivers/net/avalanche_cpmac/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/Makefile	2005-07-12 02:48:42.175574000 +0200
+@@ -0,0 +1,26 @@
++# File: drivers/net/avalanche_cpmac/Makefile
++#
++# Makefile for the Linux network (CPMAC) device drivers.
++#
++
++O_TARGET := avalanche_cpmac.o
++
++
++list-multi := avalanche_cpmac.o
++obj-$(CONFIG_MIPS_AVALANCHE_CPMAC) := avalanche_cpmac.o
++
++avalanche_cpmac-objs += cpmac.o            cpmacHalLx.o       hcpmac.o \
++                        	      psp_config_build.o psp_config_mgr.o            \
++				      psp_config_parse.o psp_config_util.o
++
++
++include $(TOPDIR)/Rules.make
++
++
++avalanche_cpmac.o:        $(avalanche_cpmac-objs)
++	$(LD) -r -o $@ $(avalanche_cpmac-objs)
++
++
++
++clean:
++	rm -f core *.o *.a *.s
+diff -urN linux.old/drivers/net/avalanche_cpmac/mdio_reg.h linux.dev/drivers/net/avalanche_cpmac/mdio_reg.h
+--- linux.old/drivers/net/avalanche_cpmac/mdio_reg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/mdio_reg.h	2005-07-12 02:48:42.176573000 +0200
+@@ -0,0 +1,121 @@
++/****************************************************************************
++**      TNETD53xx Software Support
++**      Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
++**
++**      FILE: mdio_reg.h   Register definitions for the VBUS MII module
++**
++**      DESCRIPTION:
++**              This include file contains register definitions for the
++**              VBUS MII module.
++**
++**      HISTORY:
++**              27Mar02 Michael Hanrahan Original (modified from emacmdio.h)
++**              01Apr02 Michael Hanrahan Modified to include all regs. in spec
++**              03Apr02 Michael Hanrahan Updated to Version 0.6 of spec
++**              05Apr02 Michael Hanrahan Moved Phy Mode values into here
++**              30Apr02 Michael Hanrahan Updated to Version 0.8 of spec
++**              30Apr02 Michael Hanrahan Updated to recommended format
++**              10May02 Michael Hanrahan Updated to Version 0.9 of spec
++*****************************************************************************/
++#ifndef _INC_MDIO_REG
++#define _INC_MDIO_REG
++
++/***************************************************************************
++**                                                                         
++**         M D I O  M E M O R Y  M A P 
++**                                                                         
++***************************************************************************/
++
++
++#define pMDIO_VER(base)                 ((volatile bit32u *)(base+0x00))
++#define pMDIO_CONTROL(base)             ((volatile bit32u *)(base+0x04))
++#define pMDIO_ALIVE(base)               ((volatile bit32u *)(base+0x08))
++#define pMDIO_LINK(base)                ((volatile bit32u *)(base+0x0C))
++#define pMDIO_LINKINTRAW(base)          ((volatile bit32u *)(base+0x10))
++#define pMDIO_LINKINTMASKED(base)       ((volatile bit32u *)(base+0x14))
++#define pMDIO_USERINTRAW(base)          ((volatile bit32u *)(base+0x20))
++#define pMDIO_USERINTMASKED(base)       ((volatile bit32u *)(base+0x24))
++#define pMDIO_USERINTMASKED_SET(base)   ((volatile bit32u *)(base+0x28))
++#define pMDIO_USERINTMASKED_CLR(base)   ((volatile bit32u *)(base+0x2C))
++#define pMDIO_USERACCESS(base, channel) ((volatile bit32u *)(base+(0x80+(channel*8))))
++#define pMDIO_USERPHYSEL(base, channel) ((volatile bit32u *)(base+(0x84+(channel*8))))
++
++
++/***************************************************************************
++**                                                                         
++**         M D I O  R E G I S T E R  A C C E S S  M A C R O S 
++**                                                                         
++***************************************************************************/
++
++
++#define MDIO_ALIVE(base)                    (*(pMDIO_ALIVE(base)))
++#define MDIO_CONTROL(base)                  (*(pMDIO_CONTROL(base)))
++#define         MDIO_CONTROL_IDLE                 (1 << 31)
++#define         MDIO_CONTROL_ENABLE               (1 << 30)
++#define         MDIO_CONTROL_PREAMBLE             (1 << 20)  
++#define         MDIO_CONTROL_FAULT                (1 << 19)
++#define         MDIO_CONTROL_FAULT_DETECT_ENABLE  (1 << 18)
++#define         MDIO_CONTROL_INT_TEST_ENABLE      (1 << 17)
++#define         MDIO_CONTROL_HIGHEST_USER_CHANNEL (0x1F << 8)
++#define         MDIO_CONTROL_CLKDIV               (0xFF)
++#define MDIO_LINK(base)                     (*(pMDIO_LINK(base)))
++#define MDIO_LINKINTRAW(base)               (*(pMDIO_LINKINTRAW(base)))
++#define MDIO_LINKINTMASKED(base)            (*(pMDIO_LINKINTMASKED(base)))
++#define MDIO_USERINTRAW(base)               (*(pMDIO_USERINTRAW(base)))
++#define MDIO_USERINTMASKED(base)            (*(pMDIO_USERINTMASKED(base)))
++#define MDIO_USERINTMASKED_CLR(base)        (*(pMDIO_USERINTMASKED_CLR(base)))
++#define MDIO_USERINTMASKED_SET(base)        (*(pMDIO_USERINTMASKED_SET(base)))
++#define MDIO_USERINTRAW(base)               (*(pMDIO_USERINTRAW(base)))
++#define MDIO_USERACCESS(base, channel)      (*(pMDIO_USERACCESS(base, channel)))
++#define         MDIO_USERACCESS_GO     (1 << 31)
++#define         MDIO_USERACCESS_WRITE  (1 << 30)
++#define         MDIO_USERACCESS_READ   (0 << 30)
++#define         MDIO_USERACCESS_ACK    (1 << 29)
++#define         MDIO_USERACCESS_REGADR (0x1F << 21)
++#define         MDIO_USERACCESS_PHYADR (0x1F << 16)
++#define         MDIO_USERACCESS_DATA   (0xFFFF)
++#define MDIO_USERPHYSEL(base, channel)      (*(pMDIO_USERPHYSEL(base, channel)))
++#define         MDIO_USERPHYSEL_LINKSEL         (1 << 7)
++#define         MDIO_USERPHYSEL_LINKINT_ENABLE  (1 << 6)
++#define         MDIO_USERPHYSEL_PHYADR_MON      (0x1F)
++#define MDIO_VER(base)                      (*(pMDIO_VER(base)))
++#define         MDIO_VER_MODID         (0xFFFF << 16)
++#define         MDIO_VER_REVMAJ        (0xFF   << 8)
++#define         MDIO_VER_REVMIN        (0xFF)
++
++
++
++
++/****************************************************************************/
++/*                                                                          */
++/*         P H Y   R E G I S T E R  D E F I N I T I O N S                   */
++/*                                                                          */
++/****************************************************************************/
++
++
++#define PHY_CONTROL_REG       0
++  #define PHY_RESET           (1<<15)
++  #define PHY_LOOP            (1<<14)
++  #define PHY_100             (1<<13)
++  #define AUTO_NEGOTIATE_EN   (1<<12)
++  #define PHY_PDOWN           (1<<11)
++  #define PHY_ISOLATE         (1<<10)
++  #define RENEGOTIATE         (1<<9)
++  #define PHY_FD              (1<<8)
++
++#define PHY_STATUS_REG        1
++  #define NWAY_COMPLETE       (1<<5)
++  #define NWAY_CAPABLE        (1<<3)
++  #define PHY_LINKED          (1<<2)
++
++#define NWAY_ADVERTIZE_REG    4
++#define NWAY_REMADVERTISE_REG 5
++  #define NWAY_FD100          (1<<8)
++  #define NWAY_HD100          (1<<7)
++  #define NWAY_FD10           (1<<6)
++  #define NWAY_HD10           (1<<5)
++  #define NWAY_SEL            (1<<0)
++  #define NWAY_AUTO           (1<<0)
++
++
++#endif _INC_MDIO_REG
+diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_build.c linux.dev/drivers/net/avalanche_cpmac/psp_config_build.c
+--- linux.old/drivers/net/avalanche_cpmac/psp_config_build.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/psp_config_build.c	2005-07-12 02:48:42.176573000 +0200
+@@ -0,0 +1,335 @@
++/******************************************************************************
++ * FILE PURPOSE:    PSP Config Manager - Configuration Build Source
++ ******************************************************************************
++ * FILE NAME:       psp_config_build.c
++ *
++ * DESCRIPTION:     Configuration Build API Implementation
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifdef INCLUDE_FFS
++#include "ffs.h"
++#endif /* INCLUDE_FFS */
++
++#include "psp_config_mgr.h"
++#include "psp_config_build.h"
++#include "psp_config_util.h"
++
++#define MAX_DEVICE_NAME_LEN     16
++#define MAX_DEVICE_STR_LEN      512
++
++#ifndef NULL
++#define NULL (char *)0
++#endif
++
++#include <asm/ar7/sangam.h>
++#include <linux/slab.h>
++#include <linux/config.h>
++
++
++#define os_malloc(size) kmalloc(size, GFP_KERNEL)
++
++int psp_run_enumerator(void)
++{
++    return(0);
++}
++
++#if defined (CONFIG_AVALANCHE_CPMAC_AUTO)
++
++static int auto_detect_cpmac_phy(void)
++{
++
++#define SELECT_INT_PHY_MAC 0
++#define SELECT_EXT_PHY_MAC 1
++
++    volatile unsigned long *reset_cntl = AVALANCHE_RESET_CONTROL_BASE, *mdio_cntl  = ((int)AVALANCHE_MDIO_BASE + 0x4);
++    unsigned int j= 0, detected_phy_map = 0, auto_select = SELECT_INT_PHY_MAC;
++                                                                                                                   
++    *reset_cntl |= (1 << AVALANCHE_MDIO_RESET_BIT) | (1 << AVALANCHE_LOW_CPMAC_RESET_BIT) | (1 << AVALANCHE_HIGH_CPMAC_RESET_BIT) | (1 << AVALANCHE_LOW_EPHY_RESET_BIT);                                 
++    *mdio_cntl   = (1 << 30) | ((CONFIG_AR7_SYS * 1000)/2200);                                              
++                                                                                                                   
++    for(j=0;j < 300000; j++) 
++    { 
++        if(j%100000) continue;
++
++        detected_phy_map = *(mdio_cntl + 1);
++        if(detected_phy_map) 
++        {
++            detected_phy_map &= ~AVALANCHE_LOW_CPMAC_PHY_MASK;
++                
++            if(detected_phy_map && !(detected_phy_map & (detected_phy_map - 1)))
++            {
++                auto_select = SELECT_EXT_PHY_MAC;
++                break;
++            }
++        } 
++    }
++
++    return(auto_select);
++
++}
++
++#endif
++
++
++#ifndef AVALANCHE_LOW_CPMAC_MDIX_MASK
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0
++#endif
++
++void psp_load_default_static_cfg(void)
++{
++    char s2[100],  s3[100];
++    char s4[2000], s6[2000];
++    int threshold = 20;
++    char *tx_threshold_ptr = prom_getenv("threshold");
++    
++    if(tx_threshold_ptr)
++      threshold = simple_strtol(tx_threshold_ptr, (char **)NULL, 10);
++
++    /* Static configuration if options.conf not present */
++    sprintf(s3,"cpmdio(id=mii, base=%u, reset_bit=%d)", AVALANCHE_MDIO_BASE, 22);
++    sprintf(s2, "reset( id=[ResetRegister], base=%u)", AVALANCHE_RESET_CONTROL_BASE);
++
++    sprintf(s4, "cpmac(id=[cpmac], unit=0, base=%u, size=0x800, reset_bit=%d, PhyMask=%u, MdixMask=%u, MLink=0, int_line=%d, memory_offset=0, RX_CAF=1, RX_PASSCRC=0, RX_CEF=1, RX_BCAST=0, RX_BCASTCH=0, Ch0=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch1=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch2=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128])", AVALANCHE_LOW_CPMAC_BASE, AVALANCHE_LOW_CPMAC_RESET_BIT, AVALANCHE_LOW_CPMAC_PHY_MASK, AVALANCHE_LOW_CPMAC_MDIX_MASK, AVALANCHE_LOW_CPMAC_INT,threshold,threshold,threshold);
++
++    sprintf(s6, "cpmac(id=[cpmac], unit=1, base=%u, size=0x800, reset_bit=%d, PhyMask=%u, MLink=0, int_line=%d, memory_offset=0, RX_CAF=1, RX_PASSCRC=0, RX_CEF=1, RX_BCAST=0, RX_BCASTCH=0, Ch0=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch1=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch2=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128])", AVALANCHE_HIGH_CPMAC_BASE, AVALANCHE_HIGH_CPMAC_RESET_BIT, AVALANCHE_HIGH_CPMAC_PHY_MASK, AVALANCHE_HIGH_CPMAC_INT,threshold,threshold,threshold);
++
++    psp_config_add("reset", s2, psp_config_strlen(s2), en_compile);
++
++
++#if defined (CONFIG_AVALANCHE_LOW_CPMAC)
++
++    psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
++    psp_config_add("cpmac", s4, psp_config_strlen(s4), en_compile);
++
++#endif
++
++
++#if defined (CONFIG_AVALANCHE_HIGH_CPMAC)
++
++    psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
++    psp_config_add("cpmac", s6, psp_config_strlen(s6), en_compile);
++
++#endif
++
++#if defined (CONFIG_AVALANCHE_CPMAC_AUTO)
++    { 
++        char *phy_sel_ptr = prom_getenv("mac_phy_sel"); 
++        int   phy_sel = SELECT_EXT_PHY_MAC;
++        char *mac_port = prom_getenv("MAC_PORT"); /* Internal: 0, External: 1 */
++
++        if(phy_sel_ptr && (0 == strcmp(phy_sel_ptr, "int")))
++        {
++            phy_sel = SELECT_INT_PHY_MAC;
++        }
++
++        //if(phy_sel == auto_detect_cpmac_phy())
++        if(!mac_port || (0 != strcmp(mac_port, "0")))
++        {
++            printk("Using the MAC with external PHY\n");
++            psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
++            psp_config_add("cpmac", s6, psp_config_strlen(s6), en_compile);
++        }
++        else
++        {
++            printk("Using the MAC with internal PHY\n");
++            psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
++            psp_config_add("cpmac", s4, psp_config_strlen(s4), en_compile);
++        }
++    }
++                      
++#endif    
++
++}
++
++char* psp_conf_read_file(char *p_file_name)
++{
++#ifdef INCLUDE_FFS
++    
++    char        *p_file_data = NULL;
++    unsigned int file_size;
++    FFS_FILE    *p_file = NULL;
++
++    if(p_file_name == NULL)
++    {
++        return (NULL);
++    }
++
++    if(!(p_file = ffs_fopen(p_file_name, "r"))) 
++    {
++        return(NULL);
++    }
++
++    file_size = p_file->_AvailableBytes;
++
++    p_file_data = os_malloc(file_size + 1);
++    
++    if(ffs_fread(p_file_data, file_size, 1, p_file) == 0)
++    {
++        kfree(p_file_data);
++        return(NULL);
++    }
++
++    ffs_fclose(p_file);
++   
++    p_file_data[file_size] = '\0';
++
++    return(p_file_data);
++    
++#else /* NO FFS */
++    return(NULL);
++#endif /* INCLUDE_FFS */
++}
++
++int psp_conf_get_line(char *p_in_data, char **next_line)
++{
++    char *p       = p_in_data;
++
++    while(*p && *p++ != '\n')
++    {
++
++    } 
++   
++    *next_line = p;
++
++    return(p - 1 - p_in_data);
++}
++
++
++int psp_conf_is_data_line(char *line)
++{
++    int ret_val = 1;
++
++    if(*line == '\0' || *line == '\n' || *line == '#')
++        ret_val = 0;
++
++    return(ret_val);
++}
++
++int psp_conf_get_key_size(char *data)
++{
++    char *p = data;
++
++    while(*p && *p != '\n' && *p != '(' && *p != ' ')
++        p++;
++
++    return(p - data);
++}
++
++char* psp_conf_eat_white_spaces(char *p)
++{
++    while(*p && *p != '\n' && *p == ' ')
++        p++;
++
++    return (p);
++}
++
++int psp_build_from_opt_conf(void)
++{
++    char *data       = NULL;
++    char *data_hold  = NULL;
++    char *next_line  = NULL; 
++    int  line_size   = 0;
++
++    if((data = psp_conf_read_file("/etc/options.conf")) == NULL)
++        return(-1);
++
++    data_hold = data;
++
++    while((line_size=psp_conf_get_line(data, &next_line)) != -1)
++    {
++
++        char *name = NULL;
++        int  name_size; 
++ 
++    data = psp_conf_eat_white_spaces(data);
++
++        if(psp_conf_is_data_line(data))
++        {
++            data[line_size] = '\0';
++ 
++            name_size = psp_conf_get_key_size(data);
++           
++            if(name_size > 0) 
++            {
++                name = (char *) os_malloc(name_size + 1);
++                if(name == NULL) break;
++
++                psp_config_memcpy(name, data, name_size);
++                name[name_size] = '\0';
++
++                psp_config_add(name, data, line_size, en_opt_conf);
++            
++                kfree(name);
++            }
++
++            data[line_size] = '\n';
++        }
++
++        data = next_line;
++    }
++
++    kfree(data_hold);
++    return (0);
++}
++
++
++int psp_write_conf_file(char *p_write_file, char * dev_cfg_string)
++{
++#ifdef INCLUDE_FFS
++    int bytes_written=0;
++        FFS_FILE *file_ptr=NULL;    
++ 
++    /*
++     * NOTE: In current implementation of FFS in ADAM2 if the file exists beforehand, it
++     * can't be opened for write.
++     */
++        if(!(file_ptr=ffs_fopen(p_write_file, "w"))) {
++        return(-1);
++        }
++    
++    /* Write into the file "output.con" the character string */
++    /* write a \n before a writing a line */
++    if(!(bytes_written = ffs_fwrite("\n", 1, sizeof(char), file_ptr))) {
++        return (-1);
++    }
++    
++    if(!(bytes_written = ffs_fwrite(dev_cfg_string, psp_config_strlen(dev_cfg_string), sizeof(char), file_ptr))) {
++        return (-1);        
++    }
++    ffs_fclose(file_ptr);
++    return (bytes_written+1);
++#else /* NO FFS */
++    return(-1);
++#endif /* INCLUDE_FFS */
++}
++
++void build_psp_config(void)
++{
++
++    /* initialize the repository. */
++    psp_config_init();
++    
++#ifdef INCLUDE_FFS
++    ffs_init();
++#endif /* INCLUDE_FFS */
++
++    /* read the configuration from the options.conf to override default ones */
++    psp_build_from_opt_conf();
++
++    /* read the configuration which were not over ridden in options.conf */
++    psp_load_default_static_cfg();
++
++    /* let the vlynq be enumerated. Enumerator will add cfg info
++       of the discovered device instances to the repository.*/
++    psp_run_enumerator();
++
++    /* dump the repository*/
++    dump_device_cfg_pool();
++
++}
++
+diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_build.h linux.dev/drivers/net/avalanche_cpmac/psp_config_build.h
+--- linux.old/drivers/net/avalanche_cpmac/psp_config_build.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/psp_config_build.h	2005-07-12 02:48:42.176573000 +0200
+@@ -0,0 +1,138 @@
++/******************************************************************************
++ * FILE PURPOSE:    PSP Config Manager - Configuration Build Header
++ ******************************************************************************
++ * FILE NAME:       psp_config_build.h
++ *
++ * DESCRIPTION:     Configuration Build API's.
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifndef __PSP_CONF_BUILD_H__
++#define __PSP_CONF_BUILD_H__
++
++/*------------------------------------------------------------------------------
++ * Name: psp_conf_read_file
++ *
++ * Parameters: 
++ *         in: p_file_name - the name of the file to read from.
++ *
++ * Description:
++ *     Reads the entire file in one shot. This function opens  the 
++ *     file, determines the size of the data to be read, allocates 
++ *     the required memory, NULL terminates the data and closes the
++ *     file.
++ *
++ *     It is responsibily of the callee to free the memory after it is
++ *     done with that data.
++ *    
++ *
++ * Returns:
++ *     A NULL pointer, if failed to read the data otherwise, a valid
++ *     pointer referring to the data read from the file.
++ *
++ * Example: 
++ *   
++ *     psp_conf_read_file("/etc/options.conf");
++ *---------------------------------------------------------------------------*/
++ char *psp_conf_read_file(char *p_file_name);
++
++ /*----------------------------------------------------------------------------
++  * Function : psp_conf_write_file
++  *
++  * Parameters:
++  *         in: p_file_name - the file to which data is to be written.
++  *         in: data        - the NULL terminated data string.
++  *
++  * Description:
++  *     Write the indicated data into the file. This function opens the file,
++  *     appends the data to end of the file, closes the file. 
++  *
++  * Returns:
++  *
++  *     The number of bytes on success. 
++  *     0 on failure.
++  *
++  * Example:
++  *
++  *     psp_conf_write_file("/etc/outcon.conf", data);
++  *--------------------------------------------------------------------------*/
++ int   psp_conf_write_file(char *p_file_name, char *data);
++
++ /*----------------------------------------------------------------------------
++  * Function: psp_conf_get_line
++  *
++  * Parameters:
++  *         in: data      - the data from which the line is to identified.
++  *        out: next_line - the pointer to start of the next line. 
++  *
++  * Description:
++  *     Expects the data to be '\n' separated segments and data is NULL 
++  *     terminated. Parses the given data for '\n' or '\0'. Provides a pointer
++  *     to the start of next line in the next_line. 
++  *
++  * Returns:
++  *     -1 on error.
++  *      0 or more to indicate the number of bytes in the line starting at 
++  *      data.
++  *--------------------------------------------------------------------------*/
++ int psp_get_conf_line(char *p_in_data, char **next_line);
++
++ /*----------------------------------------------------------------------------
++  * Function: psp_conf_is_data_line
++  *
++  * Parameters:
++  *         in: line - the array of bytes.
++  *
++  * Description:
++  *     Tests the first byte in the array for '\0' or '\n' or '#'. Lines 
++  *     starting with these characters are not considered data.
++  *
++  * Returns:
++  *     1 if the line has data.
++  *     0 otherwise.
++  *
++  *--------------------------------------------------------------------------*/
++ int psp_conf_is_data_line(char *line);
++
++ /*----------------------------------------------------------------------------
++  * Function: psp_conf_eat_white_spaces
++  *
++  * Parameters:
++  *         in: line - the array of bytes.
++  *
++  * Description:
++  *     Eats white spaces at the begining of the line while looking out for 
++  *     '\0' or '\n' or ' '.
++  * 
++  * Returns:
++  *     Pointer to the begining of the non white space character. 
++  *     NULL if '\0' or '\n' is found.
++  *
++  *--------------------------------------------------------------------------*/
++  char *psp_conf_eat_white_spaces(char *line);
++
++  /*---------------------------------------------------------------------------
++   * Function: psp_conf_get_key_size
++   *
++   * Parameters:
++   *         in: line - the array of bytes.
++   *
++   * Description:
++   *     Identifies the size of the 'key' in array formatted as 
++   *     key(id=[key1]....). This function also checks out for '\0' and '\n'.
++   *
++   * Returns:
++   *     On success, The number of bytes that forms the key. 
++   *     0 otherwise. 
++   *     
++   *-------------------------------------------------------------------------*/
++  int psp_conf_get_key_size(char *line);
++
++
++
++#endif /* __PSP_CONF_BUILD_H__ */
++
+diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.c linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.c
+--- linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.c	2005-07-12 02:48:42.177573000 +0200
+@@ -0,0 +1,464 @@
++/******************************************************************************
++ * FILE PURPOSE:    PSP Config Manager Source
++ ******************************************************************************
++ * FILE NAME:       psp_config_mgr.c
++ *
++ * DESCRIPTION:
++ *
++ * Manages configuration information. The repository is managed on the basis of 
++ * <key, info> pair. It is possible to have multiple occurrence of the same key. 
++ * Multiple occurences of the same keys are referred to as 'instances'. 
++ * 'instances' are assigned in the order of configuration arrival. The first 
++ * config for a 'key' added to the repository would be treated as instance 0 and
++ * next config to arrive for the same key would be treated as instance '1' and 
++ * so on.
++ * 
++ * Info is retrieved from the repository based on the 'key' and 'instance' value.
++ *
++ * No assumption is made about the format of the information that is put in the 
++ * repository. The only requirement is that 'key' should be NULL terminated 
++ * string.
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++//#include <stdio.h>
++//#include <stdlib.h>
++#include "psp_config_mgr.h"
++#include "psp_config_util.h"
++
++#include <linux/slab.h>
++
++/*-----------------------------------------------------------
++  Implemented elsewhere
++ -----------------------------------------------------------*/
++extern int sys_read_options_conf(void);
++extern int sys_write_options_conf(char *cfg_info);
++extern int sys_load_default_static_cfg(void);
++extern int sys_run_enumerator(void);
++
++#define os_malloc(size) kmalloc(size, GFP_KERNEL)
++
++/*---------------------------------------------------------
++ * Data structures.
++ *--------------------------------------------------------*/
++struct device_cfg_data;
++
++typedef struct device_instance_cfg_data
++{
++    struct device_instance_cfg_data       *next;
++    char                                  locale[100];
++    unsigned int                          data_size;
++    char                                  *data;
++
++} DEV_INSTANCE_CFG_DATA_T;
++
++struct device_cfg_collection;
++
++typedef struct device_cfg_collection
++{
++    struct device_cfg_collection *next;
++    char                         *device_name;
++    CFG_TYPE_T                   cfg_type;
++    int                          count;
++    DEV_INSTANCE_CFG_DATA_T      *dev_inst_list_begin;
++    DEV_INSTANCE_CFG_DATA_T      *dev_inst_list_end;
++} DEVICE_CFG_T;
++
++
++typedef struct device_cfg_list
++{
++    DEVICE_CFG_T   *device_cfg_begin;
++    int            count;
++} DEVICE_CFG_LIST_T;
++
++/*-----------------------------------------------------------------------------
++ * Functions used locally with in the file.
++ *---------------------------------------------------------------------------*/
++static void p_init_device_cfg_list(void);
++static int  p_add_instance_cfg_data(DEVICE_CFG_T            *p_dev_cfg,
++                                    DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data);
++static DEVICE_CFG_T* p_create_dev_cfg(char *device_name);
++static DEVICE_CFG_T* p_get_dev_cfg(char *device_name);
++static int p_set_device_cfg_type(DEVICE_CFG_T     *p_dev_cfg,
++                                 CFG_TYPE_T       cfg_type);
++
++/* PSP Config manager debug */                                 
++#define PSP_CFG_MGR_DEBUG 0
++
++#define dbgPrint if (PSP_CFG_MGR_DEBUG) printk
++
++/*-----------------------------------------------------------------------------
++ * The repository.
++ *---------------------------------------------------------------------------*/
++static DEVICE_CFG_LIST_T g_device_cfg_list;
++
++/*---------------------------------------------
++ * Initialize the device collection pool.
++ *--------------------------------------------*/ 
++void p_init_device_cfg_list(void)
++{
++    g_device_cfg_list.count = 0;
++    g_device_cfg_list.device_cfg_begin = NULL;
++}
++
++/*----------------------------------------------------------------------
++ * Add the device cfg into the device linked list.
++ *---------------------------------------------------------------------*/
++int p_add_dev_cfg_to_list(DEVICE_CFG_LIST_T *p_dev_list,
++                          DEVICE_CFG_T      *p_dev_cfg)
++{
++    if(p_dev_list->count != 0)
++        p_dev_cfg->next            = p_dev_list->device_cfg_begin;
++
++    p_dev_list->device_cfg_begin   = p_dev_cfg;
++
++    p_dev_list->count++;
++
++    return (0);
++}
++
++/*------------------------------------------------------------------
++ * Add the cfg data into the cfg data linked list of the collection.
++ *------------------------------------------------------------------*/
++int p_add_instance_cfg_data(DEVICE_CFG_T                 *p_dev_cfg,
++                            DEV_INSTANCE_CFG_DATA_T      *p_dev_inst_data)
++{
++    if(p_dev_cfg->count == 0)
++        p_dev_cfg->dev_inst_list_begin     = p_dev_inst_data;
++    else
++        p_dev_cfg->dev_inst_list_end->next = p_dev_inst_data;
++        
++    p_dev_cfg->dev_inst_list_end           = p_dev_inst_data;
++
++    p_dev_cfg->count++;
++    
++    return (0);
++}
++
++/*-----------------------------------------------------------------------------
++ * Create the device cfg.
++ *---------------------------------------------------------------------------*/
++DEVICE_CFG_T *p_create_dev_cfg(char *device_name)
++{
++    DEVICE_CFG_T *p_dev_cfg = NULL;
++
++    if((p_dev_cfg = os_malloc(sizeof(DEVICE_CFG_T))) == NULL)
++    {
++        dbgPrint("Failed to allocate memory for DEVICE_CFG_T.\n");
++    }
++    else if((p_dev_cfg->device_name = os_malloc(psp_config_strlen(device_name) + 1))==NULL)
++    {
++        dbgPrint("Failed to allocate memory for device name.\n");
++    }
++    else
++    {
++        psp_config_strcpy(p_dev_cfg->device_name, device_name);
++        p_dev_cfg->cfg_type = en_raw;
++        p_dev_cfg->count = 0;
++        p_dev_cfg->dev_inst_list_begin = NULL;
++        p_dev_cfg->dev_inst_list_end   = NULL;
++        p_dev_cfg->next                = NULL;
++    }
++
++    return(p_dev_cfg);
++}
++
++/*------------------------------------------------------------------------------
++ * Get the device cfg collection.
++ *-----------------------------------------------------------------------------*/
++DEVICE_CFG_T *p_get_dev_cfg(char *device_name)
++{
++    int count               = 0;
++    DEVICE_CFG_T *p_dev_cfg = g_device_cfg_list.device_cfg_begin;
++
++    for(count=0; count < g_device_cfg_list.count; count++)
++    {
++        if(psp_config_strcmp(device_name, p_dev_cfg->device_name) == 0)
++        {
++            break;
++        }
++
++        p_dev_cfg = p_dev_cfg->next;
++    }
++    
++    return(p_dev_cfg); 
++}
++
++/*-------------------------------------------------------------------------
++ * Gets the name for the static cfg type. Utility function. Debug purposes.
++ *-------------------------------------------------------------------------*/
++char *p_get_cfg_type_name_for_en(CFG_TYPE_T  cfg_type)
++{
++    static char raw_str      [] = "still raw";
++    static char compile_str  [] = "configured at compile time";
++    static char optconf_str  [] = "configured by options.conf";
++    static char vlynq_str    [] = "configured by VLYNQ";
++    static char no_static_str[] = "no static configuration";
++
++    if(cfg_type == en_raw)
++        return (raw_str);
++    else if(cfg_type == en_compile)
++        return (compile_str);
++    else if(cfg_type == en_opt_conf)
++        return (optconf_str);
++    else if(cfg_type == en_vlynq)
++        return (vlynq_str);
++    else
++        return (no_static_str);
++
++}
++
++/*-----------------------------------------------------------------------------
++ * Sets the static cfg status of the device collection.
++ *
++ * If the collection is en_virgin then, the collection is assigned to cfg_type.
++ * If the cfg_type is en_vlynq then, the old cfg_type is retained. 
++ * en_compile and en_opt_conf are mutually exclusive. One of these can be 
++ * accomodated.
++ *
++ *---------------------------------------------------------------------------*/
++int p_set_device_cfg_type(DEVICE_CFG_T    *p_dev_cfg,
++                          CFG_TYPE_T      cfg_type)
++{
++    int ret_val = 0;
++
++    if(p_dev_cfg->cfg_type == en_raw)
++        p_dev_cfg->cfg_type = cfg_type;
++    else if((cfg_type == en_vlynq) || (p_dev_cfg->cfg_type == cfg_type))
++        ;
++    else
++    {
++        dbgPrint("Device %s has been %s which overrides %s.\n",
++                  p_dev_cfg->device_name,
++                  p_get_cfg_type_name_for_en(p_dev_cfg->cfg_type),
++                  p_get_cfg_type_name_for_en(cfg_type));
++        ret_val = -1;
++    }
++
++    return(ret_val);
++}
++
++/*------------------------------------------------------------------------
++ * Add the config str into the repository. The cfg type indicates
++ * whether the device has been configured statically, from options.conf or
++ * by vlynq enumeration.
++ *------------------------------------------------------------------------*/
++int psp_config_add(char *key, void *p_cfg_str, unsigned int cfg_len, 
++                   CFG_TYPE_T cfg_type)
++{
++    int                     ret_val           = -1;
++    DEVICE_CFG_T            *p_dev_cfg        = NULL;
++    DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data  = NULL;  
++
++    if(p_cfg_str == NULL || key == NULL)
++    {
++        dbgPrint("Null input pointer(s).\n");
++    }
++    /* check if there exist a dev_cfg for the given key, if not,
++       then create one and add it to the device list. */
++    else if(((p_dev_cfg = p_get_dev_cfg(key)) == NULL) &&
++            (((p_dev_cfg = p_create_dev_cfg(key)) == NULL) ||
++               p_add_dev_cfg_to_list(&g_device_cfg_list, p_dev_cfg) != 0))
++    {
++        dbgPrint("Failed to allocate mem or add dev cfg for %s.\n", key);
++    }
++    /* make sure that we can add this cfg type to the repository */
++    else if(p_set_device_cfg_type(p_dev_cfg, cfg_type) == -1)
++    {
++        dbgPrint("Ignoring \"%s\" for device \"%s\".\n",
++                  p_get_cfg_type_name_for_en(cfg_type),  
++                  p_dev_cfg->device_name); 
++    }
++    else if((p_dev_inst_data = os_malloc(sizeof(DEV_INSTANCE_CFG_DATA_T)))== NULL)
++    {
++        dbgPrint("Failed to allocate memory for DEV_INSTANCE_CFG_DATA_T.\n");
++    }
++    else if((p_dev_inst_data->data = os_malloc(cfg_len) + 1) == NULL)
++    {
++        dbgPrint("Failed to allocate memory for the config data.\n");
++    }
++    else
++    {
++        p_dev_inst_data->next = NULL;
++
++        if(cfg_type == en_opt_conf || cfg_type == en_compile)
++            psp_config_strcpy(p_dev_inst_data->locale, "dev on chip ");
++        else if(cfg_type == en_vlynq)
++            psp_config_strcpy(p_dev_inst_data->locale, "dev on vlynq");
++        else 
++            psp_config_strcpy(p_dev_inst_data->locale, "dev locale ?");
++
++        psp_config_memcpy(p_dev_inst_data->data, p_cfg_str, cfg_len);
++        p_dev_inst_data->data_size = cfg_len;
++        *(p_dev_inst_data->data + cfg_len) = '\0';
++
++        ret_val = p_add_instance_cfg_data(p_dev_cfg, p_dev_inst_data);
++    } 
++
++    return(ret_val);
++}
++
++/*-------------------------------------------------------------
++ * Get the total number of device instances in the repository
++ *------------------------------------------------------------*/
++int psp_config_get_num_keys(void)
++{
++    return(g_device_cfg_list.count);
++}
++
++
++/*--------------------------------------------------------------------
++ * Get the device configuration info from the repository.
++ *-------------------------------------------------------------------*/
++int psp_config_get(char *key, int instance, char **cfg_data_out)
++{
++    int ret_val             = -1;
++    DEVICE_CFG_T *p_dev_cfg = NULL;
++    *cfg_data_out           = NULL;
++
++    if(key == NULL && cfg_data_out == NULL)
++    {
++        dbgPrint("Key has a NULL value.\n");
++    }
++    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
++    {
++        dbgPrint("cfg information for %s could not be found.\n", key);
++    }
++    else if(p_dev_cfg->count)
++    {
++         DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data = 
++                                  p_dev_cfg->dev_inst_list_begin;
++         int index = 0;
++         for(index = 0; 
++             index != instance && index < p_dev_cfg->count; 
++             index++)
++         {
++             p_dev_inst_data = p_dev_inst_data->next;
++         }
++
++         if(p_dev_inst_data != NULL && p_dev_inst_data->data != NULL)
++         {
++             *cfg_data_out = p_dev_inst_data->data;
++             ret_val = p_dev_inst_data->data_size;
++         }
++    }
++
++    return (ret_val);
++}
++
++/*----------------------------------------------------------------
++ * Returns the number of instances found in the repository for the
++ * specified key.
++ *---------------------------------------------------------------*/
++int psp_config_get_num_instances(char *key)
++{
++    int ret_val             = 0;
++    DEVICE_CFG_T *p_dev_cfg = NULL;
++
++    if(key == NULL)
++    {
++        dbgPrint("Key has a NULL value.\n");
++    }
++    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
++    {
++        dbgPrint("cfg information for %s could not be found.\n", key);
++    }
++    else
++    {
++        ret_val = p_dev_cfg->count;
++    }
++    
++    return (ret_val);
++}
++
++/*------------------------------------------------------------------
++ * Dump the configuration repository. 
++ * Caution: DO NOT USE THIS FOR ANY NON NBU specified config format.
++ *-----------------------------------------------------------------*/
++void psp_config_print(char *key)
++{
++    DEVICE_CFG_T *p_dev_cfg = NULL;
++
++    if(key == NULL)
++    {
++        dbgPrint("Key has a NULL value.\n");
++    }
++    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
++    {
++        dbgPrint("cfg information for %s could not be found.\n", key);
++    }
++    else if(p_dev_cfg && p_dev_cfg->count)
++    {
++        DEV_INSTANCE_CFG_DATA_T   *p_dev_inst_data;
++
++        p_dev_inst_data = p_dev_cfg->dev_inst_list_begin;
++
++        do
++        {
++            dbgPrint("%s : %s\n", p_dev_inst_data->locale, 
++                      p_dev_inst_data->data);
++            p_dev_inst_data = p_dev_inst_data->next;
++
++        } while(p_dev_inst_data);
++    }
++    else
++    {
++        dbgPrint("Nothing was found for %s.\n", key);
++    }
++}
++
++void dump_device_cfg_pool(void)
++{
++    DEVICE_CFG_T *p_dev_cfg = g_device_cfg_list.device_cfg_begin;
++    
++    if(p_dev_cfg != NULL && g_device_cfg_list.count)
++    {
++        int index=0;
++
++        for(index=0; index < g_device_cfg_list.count; index++)
++        {
++            psp_config_print(p_dev_cfg->device_name);
++            p_dev_cfg = p_dev_cfg->next;
++        }
++    }
++    else
++    {
++        dbgPrint("repository is empty.\n");
++    }
++}
++
++void psp_config_init(void)
++{
++    p_init_device_cfg_list();
++}
++
++void psp_config_cleanup()                                                       
++{                                                                               
++    int dev_count              = 0;                                             
++    int inst_count             = 0;                                             
++    DEVICE_CFG_T            *p = g_device_cfg_list.device_cfg_begin;            
++    DEV_INSTANCE_CFG_DATA_T *q = NULL;                                          
++                                                                                
++    for(dev_count = 0; dev_count < g_device_cfg_list.count; dev_count++)        
++    {                                                                           
++        DEVICE_CFG_T            *p_temp = NULL;                                 
++        if(p) q = p->dev_inst_list_begin;                                       
++                                                                                
++        for(inst_count = 0; inst_count < p->count && q != NULL; inst_count++)   
++        {                                                                       
++            DEV_INSTANCE_CFG_DATA_T *q_temp = q;                                
++            q_temp = q->next;                                                   
++            kfree(q->data);                                                     
++            kfree(q);                                                           
++            q = q_temp;                                                         
++        }                                                                       
++                                                                                
++        p_temp = p->next;                                                       
++        kfree(p);                                                               
++        p = p_temp;                                                             
++    }                                                                           
++}                                                                               
+diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.h linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.h
+--- linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.h	2005-07-12 02:48:42.177573000 +0200
+@@ -0,0 +1,110 @@
++/******************************************************************************
++ * FILE PURPOSE:    PSP Config Manager Header
++ ******************************************************************************
++ * FILE NAME:       psp_config_mgr.h
++ *
++ * DESCRIPTION:     Storing and retrieving the configuration based on key
++ * A set of APIs to be used by one and sundry (including drivers and enumerator) to build
++ * and read cfg information of the devices for an avalanche SOC.
++ *
++ * This set of APIs isolates the configuration management from the world and provides simple
++ * access convinience.
++ *
++ * Device in this set refers to the peripherals that can be found on the SOC or on VLYNQ.
++ * The configuration is stored in the form of string and drivers can use these APIs to get
++ * a particular parameter value.
++ *
++ * The memory allocation for the pass back parameters is done by the caller.
++ *
++ * 0 is returned for SUCCESS or TRUE.
++ *  -1 is returned for FAILURE or FALSE.
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++ 
++#ifndef __PSP_CONFIG_MGR_H__
++#define __PSP_CONFIG_MGR_H__
++
++typedef enum cfg_type
++{
++    en_raw     = 0,
++    en_compile,
++    en_opt_conf,
++    en_vlynq
++} CFG_TYPE_T;
++
++/* Build psp configuration */
++void build_psp_config(void);
++ 
++/********************************************************
++ * Access Operations.
++ ********************************************************/
++
++/*------------------------------------------------------------------------- 
++   initializes the configuration repository. 
++ -------------------------------------------------------------------------*/
++void  psp_config_init(void);
++
++/*-------------------------------------------------------------------------- 
++   Adds the configuration information into the repository. 'key' is required 
++   to be NULL terminated string. 'cfg_ptr' points to the configuration data.
++   'cfg_len' is the length of the data pointed to by 'cfg_ptr' in bytes. 
++   'cfg_type' indicates the type of config information.
++
++   psp_config_mgr copies the 'cfg_len' bytes of data pointed to by 'cfg_ptr' 
++   into its internal repository. 
++
++   Returns: 0 on success, -1 on failure.
++  -------------------------------------------------------------------------*/
++int   psp_config_add(char *key, void *cfg_ptr, 
++                     unsigned int cfg_len, CFG_TYPE_T cfg_type);
++
++
++/* --------------------------------------------------------------------------
++   Passes back, in "*cfg_out_val" a pointer to the config data in the repository
++   for the specified 'key' and 'instance'. It returns the size of the config
++   info
++
++   psp_config_mgr passes back a pointer in '*cfg_out_val' which refers to 
++   some location in its internal repository. It is strongly recommended that 
++   if the user intends to modify the contents of the config info for reasons 
++   whatsoever, then, user should allocate memory of size returned by this 
++   routine and copy the contents from '*cfg_out_val'.
++  
++   Any, modification carried out on the repository would lead to un-expected
++   results.
++
++   Returns: 0 or more for the size of config info, -1 on error.
++  --------------------------------------------------------------------------*/ 
++int   psp_config_get(char *key, int instance, char **cfg_out_val);
++
++
++/*--------------------------------------------------------------------------
++   Get the number of keys that have been added in the repository so far.
++
++   Returns: 0 or more for the num of keys, -1 on error.
++  -------------------------------------------------------------------------*/
++int   psp_config_get_num_keys(void);
++
++
++/*--------------------------------------------------------------------------
++   Get the number of instances that are present in the repository for the 
++   given 'key'.
++
++   Returns: 0 or more for the num of instances, -1 on error.
++  -------------------------------------------------------------------------*/  
++int   psp_config_get_num_instances(char *key);
++
++
++/*--------------------------------------------------------------------------
++   Prints the config data for all instances associated with the specified 
++   'key'.
++  -------------------------------------------------------------------------*/
++void  psp_config_print(char *key);
++
++void  dump_device_cfg_pool(void);
++
++#endif /* __PSP_CONFIG_MGR_H__ */
+diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_parse.c linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.c
+--- linux.old/drivers/net/avalanche_cpmac/psp_config_parse.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.c	2005-07-12 02:48:42.178573000 +0200
+@@ -0,0 +1,362 @@
++/******************************************************************************
++ * FILE PURPOSE:    PSP Config Manager - Parse API Source
++ ******************************************************************************
++ * FILE NAME:       psp_config_parse.c
++ *
++ * DESCRIPTION:     These APIs should be used only for scanvenging parameters which 
++ *                  are stored in the following format.
++ *
++ *                  str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++//#include <stdio.h>
++#include <linux/stddef.h>
++
++/*--------------------------------------------------
++ * MACROS.
++ *-------------------------------------------------*/
++#define my_isdigit(c) (c >= '0' && c <= '9')
++#define my_isoct(c)   (c >= '0' && c <= '7')  
++#define my_xtod(c)    ((c) <= '9' ? (c) - '0' : (c) - 'a' +  10)
++#define my_ifupper(c)    (c >= 'A' && c <= 'F')
++#define XTOD(c)       ((c) - 'A' + 10)
++#define my_ishex(c)   ((c >= 'a' && c <='f') || (c >= 'A' && c<='F') || my_isdigit(c) ) 
++
++/*---------------------------------------------------
++ * Local Functions.
++ *--------------------------------------------------*/
++static int p_get_substr_from_str(char *p_in_str, char begin_delimiter,
++                                 char end_delimiter, int pair_flag,
++                                 char **p_out_str);
++static int p_get_u_int_from_str(char *p_in_str, char begin_delimiter,
++                                char end_delimiter, unsigned long *out_val);
++
++/*---------------------------------------------------
++ * Return pointer to first instance of the char.
++ *--------------------------------------------------*/
++static char* psp_config_strchr(char *str, char chr)
++{
++    while(*str)
++    {
++        if(*str == chr)
++            break;
++        str++;    
++    }
++    
++    return((*str) ? str : NULL);
++}
++
++/*------------------------------------------------------------------------
++ * Convert the string upto delimiter to unsigned long.
++ *-----------------------------------------------------------------------*/
++unsigned long my_atoul(char *p, char end_delimiter, unsigned long *out_val)
++{
++    unsigned long n;
++    int c;
++ 
++    /* check the for null input */    
++    if (!p)
++        return -1;
++     
++    c = *p;    
++    
++    /* pass through the leading spaces */
++    if (!my_isdigit(c)) 
++    {
++        while ( c == ' ')
++            c = *++p;
++            
++    }
++    
++    if (c == '0')
++    {
++        if(*(p + 1) == 'x' || *(p+1) == 'X' ) 
++        {
++            /* string is in hex format */
++
++            p += 2; 
++            c = *p;
++            
++            if(my_ishex(c))
++            {
++               if(my_ifupper(c))
++                   n = XTOD(c);
++               else         
++                       n = my_xtod(c);
++            }
++            else
++                return -1; /* invalid hex string format */
++                
++            while ((c = *++p) && my_ishex(c)) 
++            {
++                n *= 16; 
++                if(my_ifupper(c))
++                   n += XTOD(c);
++                else         
++                       n += my_xtod(c);
++            }
++         }
++        else
++        {
++            /* string is in octal format */
++
++            if( my_isoct(c) )
++            n = c - '0';
++            else
++                return -1; /* invalid octal string format */
++ 
++            while ((c = *++p) && my_isoct(c)) 
++            {
++                n *= 8; 
++                n += c - '0'; 
++            }
++        } 
++         
++    }      
++    else 
++    {
++        /* string is in decimal format */
++ 
++        if( my_isdigit(c) )
++            n = c - '0';
++        else
++            return -1; /* invalid decimal string format */
++
++        while ((c = *++p) && my_isdigit(c)) 
++        {
++            n *= 10; 
++            n += c - '0'; 
++        }
++    }
++   
++    /* move through the trailing spaces */ 
++    while(*p == ' ')
++        p++;
++        
++    if(*p == end_delimiter)
++       {
++           *out_val = n;
++           return 0;
++       }   
++        
++    else
++        return -1; /* invalid string format */
++}
++
++/*---------------------------------------------------------------------------------
++ * Gets the substring de-limited by the 'begin_delimiter' and 'end_delimiter'.
++ * and returns the size of the substring. 
++ *
++ * Parses the NULL terminated p_in_str for a character array delimited by 
++ * begin_delimiter and end_delimiter, passes back the pointer to the character 
++ * array in ' *p_out_str '. The passed pointer ' *p_out_str ' should point to 
++ * the location next (byte) to the begin_delimiter. The function routine returns 
++ * the number of characters excluding the begin_delimiter and end_delimiter, 
++ * found in the array delimited by the said delimiters.
++ *
++ * If the pair_flag is set to 1, then, number of begin_delimiter and end_delimiter
++ * found in the parsing should match (equal) and this routine passes back the 
++ * pointer to the character array, starting at a location next (byte) to the 
++ * first begin_delimiter,  inclusive of all intermediate matching delimiter 
++ * characters found between outer delimiters. If the pair flag is set and if 
++ * begin_delimiter and end_delimiter happens to be same, then error (-1) is 
++ * returned.
++ * 
++ * Return: 0 or more to indicate the size of the substring, -1 on error.
++ *-------------------------------------------------------------------------------*/
++int p_get_substr_from_str(char *p_in_str, char begin_delimiter, 
++                          char end_delimiter, int pair_flag, 
++                          char **p_out_str) 
++{
++    int cnt,pos;
++
++    if(pair_flag  && begin_delimiter == end_delimiter)
++        return -1;
++    
++    if((p_in_str = psp_config_strchr(p_in_str, begin_delimiter)) == 0)
++        return -1; /* no start delimiter found */
++    
++    p_in_str++;      
++    *p_out_str = p_in_str;
++     
++    for(pos = 0,cnt =1; cnt && p_in_str[pos] ; pos++)
++    {
++        if(p_in_str[pos] == end_delimiter)
++        {
++            if(pair_flag == 0)
++                return pos;
++               
++            cnt--;                  
++        }             
++        else if(p_in_str[pos] == begin_delimiter)
++            cnt++;
++        else 
++            ; /* We do nothing */
++      
++    }
++    
++    if( cnt == 0)   
++        return pos - 1;
++    else
++        return -1; /* no corresponding end delimiter found */
++}
++
++/*--------------------------------------------------------------------------    
++ * Parses the NULL terminated p_in_str for unsigned long value delimited by 
++ * begin_delimiter and end_delimiter, passes back the found in ' *out_val '.  
++ * The function routine returns 0 on success and returns -1 on failure. 
++ * The first instance of the de-limiter should be accounted for the parsing.
++ *
++ * The base for unsigned value would 10, octal and hex. The value passed back 
++ * would be of the base 10. Spaces at the begining of the byte array are valid  
++ * and should be ingnored in the calculation of the value. Space character in 
++ * the middle of the byte array or any character other than the valid ones 
++ * (based on base type) should return error. The octal value begins with '0', 
++ * the hex value begins with "0x" or "0X", the base value can begin with 
++ * '1' to '9'.
++ * 
++ * Returns: 0 on success, -1 on failure.
++ *-------------------------------------------------------------------------*/
++int p_get_u_int_from_str(char *p_in_str, char begin_delimiter, 
++                         char end_delimiter, unsigned long *out_val) 
++{
++    char *start;
++    unsigned long num;
++    
++    num = p_get_substr_from_str(p_in_str, begin_delimiter, end_delimiter,
++                                0, &start);
++
++    if(num == (unsigned long)-1)
++        return -1;
++    
++    return my_atoul(start,end_delimiter,out_val);
++}
++
++/*--------------------------------------------------------------------------
++ * Finds the first occurrence of the substring p_find_str in the string
++ * p_in_str. 
++ *-------------------------------------------------------------------------*/
++char *my_strstr(char *p_in_str, const char *p_find_str)
++{
++    char *p = (char *)p_find_str;
++    char *ret = NULL;
++
++    while(*p_in_str)
++    {
++        if(!(*p))
++            return (ret);
++        else if(*p_in_str == *p)
++        {
++            if(!ret) ret = p_in_str;
++            p++;
++            p_in_str++;
++        }
++        else if(ret)
++        {
++            p = (char *)p_find_str;
++            p_in_str = ret + 1;
++            ret = NULL;
++        }
++        else
++            p_in_str++;
++    }
++
++    if(*p_in_str != *p) ret = NULL;
++
++    return (ret);
++
++}
++
++/*------------------------------------------------------------------------------
++ * Gets the value of the config param in the unsigned int format. The value is 
++ * stored in the following format in the string.
++ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
++ *-----------------------------------------------------------------------------*/
++int psp_config_get_param_uint(char *p_in_str, const char *param, unsigned int *out_val)
++{
++    int   ret_val = -1;
++    char *p_strstr;
++
++    if(!p_in_str || !param || !out_val) 
++    {
++        ;
++    } 
++    else if((p_strstr = my_strstr(p_in_str, param)) == NULL)
++    {
++        ;
++    }
++    else if(p_get_u_int_from_str(p_strstr, '=', ',', (unsigned long *)out_val) == 0)
++    {
++        ret_val = 0;
++    }
++    else if(p_get_u_int_from_str(p_strstr, '=', ']', (unsigned long*)out_val) == 0)
++    {
++        ret_val = 0;
++    }
++    else if(p_get_u_int_from_str(p_strstr, '=', ')', (unsigned long*)out_val) == 0)
++    {
++        ret_val = 0;
++    }
++    else
++    {
++        /* we failed */
++    }
++
++    return (ret_val);
++}
++ 
++/*------------------------------------------------------------------------------
++ * Gets the value of the config param in the Non NULL terminated format. The value 
++ * is stored in the following format in the string. 
++ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
++ *-----------------------------------------------------------------------------*/
++int psp_config_get_param_string(char *p_in_str, const char *param, char **out_val)
++{
++    int ret_val = -1;
++    char *p_strstr;
++
++    if(!p_in_str || !param || !(out_val))
++        ;
++    else if((p_strstr = my_strstr(p_in_str, param)) == NULL)
++    {
++        ;
++    }
++    else if((ret_val = p_get_substr_from_str(p_strstr, '[', ']', 1, out_val)) == -1)
++    {
++        ;
++    }
++    else
++    {
++        ; /* we got the value */
++    }   
++ 
++    return (ret_val); 
++} 
++
++#ifdef PSP_CONFIG_MGR_DEBUG_TEST
++main()
++{
++    unsigned long num =999;
++    int ret = 0;
++    char *val1 = NULL;
++    char val[30];
++    char str1[] = "cpmac(id=[cpmac], k0=[a1=[a2=[test], a3=2], k1=100, k2=[k3=300, k4=200], k7=722)";
++
++    psp_config_get_param_uint(str1, "k7", &num);
++    printf("%u.\n", num);    
++    ret = psp_config_get_param_string(str1, "a1", &val1); 
++    if(ret >= 0) { printf("%d.\n", ret); strncpy(val, val1, ret); val[ret] = '\0';}
++    
++    printf("val = \"%s\", and size = %d \n", val, ret);
++
++    if(val[ret]) ; else printf("jeee.\n");
++}
++#endif /* PSP_CONFIG_MGR_DEBUG_TEST */
++
++
++
+diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_parse.h linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.h
+--- linux.old/drivers/net/avalanche_cpmac/psp_config_parse.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.h	2005-07-12 02:48:42.178573000 +0200
+@@ -0,0 +1,32 @@
++/******************************************************************************
++ * FILE PURPOSE:    PSP Config Manager - Parse API Header
++ ******************************************************************************
++ * FILE NAME:       psp_config_parse.h
++ *
++ * DESCRIPTION:     Parsing for params from string available in the NBU format.
++ *                  These APIs should be used only for scanvenging parameters which 
++ *                  are stored in the following format.
++ *                  
++ *                  str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifndef __PSP_CONFIG_PARSER_H__
++#define __PSP_CONFIG_PARSER_H__
++
++/*------------------------------------------------------------------
++ * These APIs should be used only for scanvenging parameters which 
++ * are stored in the following format.
++ *
++ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
++ *-----------------------------------------------------------------*/
++int psp_config_get_param_uint(char *p_in_str, const char *param, 
++                              unsigned int *out_val);
++int psp_config_get_param_string(char *p_in_str, const char *param, 
++                                char **out_val);
++
++#endif /* __PSP_CONFIG_PARSER_H__ */
+diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_util.c linux.dev/drivers/net/avalanche_cpmac/psp_config_util.c
+--- linux.old/drivers/net/avalanche_cpmac/psp_config_util.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/psp_config_util.c	2005-07-12 02:48:42.178573000 +0200
+@@ -0,0 +1,106 @@
++/******************************************************************************
++ * FILE PURPOSE:    PSP Config Manager - Utilities API Source
++ ******************************************************************************
++ * FILE NAME:       psp_config_util.c
++ *
++ * DESCRIPTION:     These APIs provide the standard "C" string interfaces. 
++ *                  Provided here to reduce dependencies on the standard libraries 
++ *                  and for cases where psp_config would required to run before 
++ *                  the whole system is loaded or outside the scope of the OS.
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++//#include <stdio.h>
++#include "psp_config_util.h"
++#include <linux/stddef.h>
++
++/*---------------------------------------------
++ * strlen.
++ *-------------------------------------------*/
++int psp_config_strlen(char *p)
++{
++    char *p_orig = p;
++    while(*p)
++        p++;
++    return(p - p_orig);
++}
++
++/*--------------------------------------------
++ * strcmp.
++ *-------------------------------------------*/
++int psp_config_strcmp(char *s1, char *s2)
++{
++    while(*s1 && *s2)
++    {
++        if(*s1 != *s2)
++            break;
++        s1++;
++        s2++;
++    }
++
++    return(*s1 - *s2);
++}
++
++/*--------------------------------------------
++ * strcpy.
++ *------------------------------------------*/
++char* psp_config_strcpy(char *dest, char *src)
++{
++    char *dest_orig = dest;
++
++    while(*src)
++    {
++        *dest++ = *src++;
++    }
++
++    *dest = '\0';
++
++    return(dest_orig);
++}
++
++/*----------------------------------------------
++ * psp_config_memcpy.
++ *--------------------------------------------*/
++void* psp_config_memcpy(void* dest, void* src, unsigned int n)
++{
++    void *dest_orig = dest;
++
++    while(n)
++    {
++        *(char *)dest++ = *(char *)src++;
++        n--;
++    }
++
++    return (dest_orig);
++}
++
++/*---------------------------------------------------
++ * Return pointer to first instance of the char.
++ *--------------------------------------------------*/
++char* psp_config_strchr(char *str, char chr)
++{
++    while(*str)
++    {
++        if(*str == chr)
++            break;
++        str++;    
++    }
++    
++    return((*str) ? str : NULL);
++}
++
++#ifdef PSP_CONFIG_MGR_DEBUG_TEST
++
++int main( )
++{
++    char s[] = "hello             ";
++    printf("%d.\n", psp_config_strlen("hello\n"));
++    printf("%d.\n", psp_config_strcmp("hells", "hellq"));
++    printf("%s %s.\n", psp_config_strcpy(s + 6, "test1"), s);
++}
++
++#endif /* PSP_CONFIG_MGR_DEBUG_TEST */
+diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_util.h linux.dev/drivers/net/avalanche_cpmac/psp_config_util.h
+--- linux.old/drivers/net/avalanche_cpmac/psp_config_util.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/psp_config_util.h	2005-07-12 02:48:42.179573000 +0200
+@@ -0,0 +1,26 @@
++/******************************************************************************
++ * FILE PURPOSE:    PSP Config Manager - Utilities API Header
++ ******************************************************************************
++ * FILE NAME:       psp_config_util.h
++ *
++ * DESCRIPTION:     These APIs provide the standard "C" string interfaces. 
++ *                  Provided here to reduce dependencies on the standard libraries 
++ *                  and for cases where psp_config would required to run before 
++ *                  the whole system is loaded or outside the scope of the OS.
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII  
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++ 
++#ifndef __PSP_CONFIG_UTIL_H__
++#define __PSP_CONFIG_UTIL_H__
++
++extern int   psp_config_strlen(char*);
++extern int   psp_config_strcmp(char*, char*);
++extern char* psp_config_strcpy(char*, char*);
++extern void* psp_config_memcpy(void*, void*, unsigned int n);
++extern char* psp_config_strchr(char*, char);
++
++#endif /* __PSP_CONFIG_UTIL_H__ */
+diff -urN linux.old/drivers/net/avalanche_cpmac/readme.txt linux.dev/drivers/net/avalanche_cpmac/readme.txt
+--- linux.old/drivers/net/avalanche_cpmac/readme.txt	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/avalanche_cpmac/readme.txt	2005-07-12 02:48:42.179573000 +0200
+@@ -0,0 +1,545 @@
++23 August 2004      CPMAC 1.7.8 (NSP Performance Team Release)
++
++CC Labels: REL_20040823_HALdallas_cpmac_01.07.08
++
++New features:  Key "MacAddr" can now be used to set the Mac Address after Open. 
++
++ unsigned char MacAddr[6];
++
++  // Set Mac Address to "00.B0.D0.10.80.C1"     
++  MacAddr[0] = 0x00;
++  MacAddr[1] = 0xB0;
++  MacAddr[2] = 0xD0;
++  MacAddr[3] = 0x10;
++  MacAddr[4] = 0x80;
++  MacAddr[5] = 0xC1;
++      
++  HalFunc->Control(HalDev, "MacAddr", hcSet, &MacAddr);      
++
++Bug fixes: in Send(), Threshold is not checked if Tx Ints are re-enabled.
++
++Modules affected:  hcpmac.c, hcpmac.h, cppi_cpmac.c
++
++22 June 2004          CPMAC 1.7.6 (NSP Performance Team Release)
++
++CC Labels: REL_20040622_HALdallas_cpmac_01.07.06
++
++New features:  Key "TxIntDisable" used to disable Tx Interrupts. If it is set, then Tx Interrupts will be processed on Send() controlled by Tx ServiceMax Setting. 
++
++ int On = 1;
++ HalFunc->Control(HalDev, "TxIntDisable", "Set", &On);
++
++Bug fixes: NTR
++
++10 June 2004          CPMAC 1.7.5 (external release)
++
++CC Labels: REL_20040610_HALdallas_cpmac_01.07.05
++
++New features:  NTR
++
++Bug fixes: Fixed an issue with calculation for the multicast hash.
++
++27 May 2004          CPSAR 1.7.4, CPMAC 1.7.4 (external release)
++
++CC Labels: REL_20040527_HALdallas_cpsar_01.07.04
++           REL_20040527_HALdallas_cpmac_01.07.04
++
++New features:  NTR
++
++Bug fixes: A flaw was fixed in the critical sectioning of the CPPI file, affecting both
++           the MAC and the SAR releases.  This flaw was detected on Titan PSP 4.7 BFT2.
++
++05 May 2004          CPSAR 1.7.3, CPMAC 1.7.3 (external release)
++
++CC Labels: REL_20040505_HALdallas_cpsar_01.07.03
++                REL_20040505_HALdallas_cpmac_01.07.03
++
++New features:  NTR
++
++Bug fixes: 1) Firmware has been updated to fix a problem with Host OAM mode operation.  
++               2) Cache macros have been fixed.
++
++Notes:  This release contains all performance enhancements currently available for CPHAL 1.x.  
++
++19 April 2004          CPSAR 1.7.2, CPMAC 1.7.2 (external release)
++
++CC Labels: REL_20040419_HALdallas_cpsar_01.07.02
++                REL_20040419_HALdallas_cpmac_01.07.02
++
++New features:  NTR
++
++Bug fixes: Fixes merge problem in 1.7.1.
++
++Notes:  This is a branch release which contains only a subset of the performance improvements.
++            The remaining performance improvements are stiill being qualified at this time.
++
++1 April 2004          CPSAR 1.7.1, CPMAC 1.7.1 (external release)
++
++NOTICE: DO NOT USE 1.7.1.  It has a known problem (see 1.7.2 notes)
++
++CC Labels: REL_20040401_HALdallas_cpsar_01.07.01
++                REL_20040401_HALdallas_cpmac_01.07.01
++
++New features:  Performance improvement in CPPI layer, affecting both CPSAR and CPMAC.  
++
++Bug fixes: NTR
++
++17 Februrary 2004    CPSAR 1.7.0 (external release)
++
++CC Labels: REL_20040217_HALdallas_cpsar_01.07.00
++
++New features:  Added support for "TxFlush" feature.  This allows the upper
++               layer to flush all or part of a given Tx queue for a given
++               channel.  This is to be used during call setup for a voice
++               connection.
++
++30 January 2004      CPMAC 1.7.0 (external release)
++
++CC Labels: REL_20040130_HALdallas_cpmac_01.07.00
++
++Bug fixes:    CPMDIO - When in manual negotiate mode and linked, dropping link would move into NWAY state rather than manual state.
++              CPMDIO - Extraneous debug message corrected
++New features: CPMDIO - Support for AutoMdix usage added. 
++
++25 September 2003      CPSAR 1.6.6 (external release)
++
++CC Labels: REL_20030925_HALdallas_cpsar_01.06.06
++
++Bug fixes:   PDSP firmware has been updated to fix the OAM padding problem.  It previously
++             wrote pad bytes into a reserved field of the OAM cell.  There is a small
++             change to the CPSAR configuration code which corresponds to the PDSP spec
++             change.
++
++New features: NTR
++
++09 September 2003      CPMAC 1.6.6 (external release)
++
++CC Labels: REL_20030909_HALdallas_cpmac_01.06.06
++
++Bug fixes:   CPMAC : When _CPMDIO_NOPHY is set, Cpmac COntrol is set to Full Duplex
++             Bridge loopback test does not show a problem using 1.6.5 if packet rate is
++             below 50,000 pbs. Now testing with a 100% send from Ixia.
++
++New features: NTR
++
++05 August 2003         CPHAL 1.6.5 (external release)
++
++CC Labels: REL_20030805_HALdallas_cpmac_01.06.05
++
++Bug fixes: NTR
++
++New features:  CPMAC : Added support for CPMAC modules that do not have a Phy connected.
++               The CPMAC is informed of this by the MdioConnect option
++               _CPMDIO_NOPHY. This is the only driver change needed to
++               receive and transmit packets through the Marvel switch.
++               Note  In this mode Link status will reported linked at 100/FD to
++               PhyNum 0xFFFFFFFF.
++
++               ALL:  Cleaned up some Vlynq support logic.
++
++16 July 2003         CPSAR 1.6.3 (external release), no CPMAC release
++
++CC Labels: REL_20030716_HALdallas_cpsar_01.06.03
++
++Bug fixes: 1) Changed default value of CPCS_UU from 0x5aa5 to 0.  The old default value caused
++              problems with Cisco routers.
++
++New features:  NTR
++
++Known issues not addressed in this release: NTR.
++
++01 July 2003         CPHAL 1.6.2 (external release)
++
++CC Labels: REL_20030701_HALdallas_cpmac_01.06.02
++           REL_20030701_HALdallas_cpsar_01.06.02
++
++Bug fixes: 1) A previous firmware upgrade caused firmware OAM loopback cells to only work on every other
++              command.  This has been fixed in the new firmware version (0.47).
++           2) Problem with PTI values changing on transparent mode packets has been resolved.
++           3) Previously, successful firmware OAM loopback cells waited 5 seconds before notifying the
++              OS of success, rather that notifying immediately.  This has been resolved in firmware.
++           4) PITS #148 (MAC and SAR), #149 (MAC) have been fixed.
++
++New features: 1) AAL5 HAL now capable of receiving unknown VCI/VPI cells on a single transparent channel.
++                 See updated HAL document (AAL5 appendix) for implementation details.
++              2) AAL5 HAL now allows OS to modify the OAM loopback timeout window.  Previously, failed
++                 OAM loopback attempts timed out after a nominal 5 seconds (based on the SAR frequency
++                 provided by the OS).  Now, the default is 5 seconds, but the OS may change the
++                 value via halControl() to any integer number of milliseconds.  See updated HAL document
++                 (AAL5 appendix) for implementation details.
++              3) MAC (cpmdio): added loopback to Istate.  Used for debug.
++
++Known issues not addressed in this release: NTR.
++
++09 June 2003         CPSAR 1.6.1 (external release), CPMAC 1.6.1 (internal release - no functional change)
++
++Note: This is the same set of fixes being applied to 1.6.0 that were applied to 1.5.3.  The only difference
++      between 1.6.1 and 1.5.4 is that 1.6.1 has the TurboDSL fix.
++
++CC Labels: REL_20030609_HALdallas_cpmac_01.06.01
++           REL_20030609_HALdallas_cpsar_01.06.01
++
++Bug fixes: 1) Bug in OamLoopbackConfig fixed.
++           2) New firmware version (.43) to fix Westell issue of dropped downstream packets in
++              presence of OAM traffic when operating at or near line rate.
++
++New features: NTR.
++
++09 June 2003         CPSAR 1.5.4 (external release), CPMAC 1.5.4 (internal release - no functional change)
++
++Note:  This is a branch release from 1.5.3.  This does not contain anything from 1.6.0.  The CPMAC is
++only being labeled to keep the release flow consistent.
++
++CC Labels: REL_20030609_HALdallas_cpmac_01.05.04
++           REL_20030609_HALdallas_cpsar_01.05.04
++
++Bug fixes: 1) Bug in OamLoopbackConfig fixed.
++           2) New firmware version (.43) to fix Westell issue of dropped downstream packets in
++              presence of OAM traffic when operating at or near line rate.
++
++New features: NTR.
++
++30 May 2003         CPSAR 1.6.0 (external release), CPMAC 1.6.0 (internal release - no functional change)
++
++CC Labels: REL_20030530_HALdallas_cpmac_01.06.00
++           REL_20030530_HALdallas_cpsar_01.06.00
++
++Bug fixes: 1) TurboDSL issue has been fixed with a software workaround in TxInt.  This workaround
++              has been verified under Adam2 ONLY at this point.  Testing remains to be done on
++              Linux and VxWorks.
++
++New features: NTR.
++
++Known issues not addressed in this release: NTR.
++
++30 May 2003         CPSAR 1.5.3 (external release), CPMAC 1.5.3 (internal release - no functional change)
++
++CC Labels: REL_20030530_HALdallas_cpmac_01.05.03
++           REL_20030530_HALdallas_cpsar_01.05.03
++
++Bug fixes: NTR.
++
++New features: 1) AAL5 Send() has been modified to accept an ATM Header either in the first
++                 fragment by itself, or in the first fragment directly in front of payload data.
++                 The API() does not change.
++              2) Documentation updates throughout, reflected in latest version of CPHAL user's
++                 guide.
++              3) AAL5 MaxFrags default value is now 46.  This is based upon the default AAL5
++                 RxBufSize of 1518 (MaxFrags = (65568/1518) + 2).  IF THE OS CHOOSES A SMALLER
++                 RxBufSize, IT MUST INCREASE THE VALUE OF MaxFrags ACCORDINGLY.  This is done
++                 via halControl(), prior to Open().
++
++Known issues not addressed in this release:
++              1) The Linux SAR driver is seeing an issue in which it cannot
++                 reliably send traffic simultaneously on both the high and
++                 low priority queues of a single AAL5 channel. (TurboDSL)
++
++23 May 2003         CPHAL 1.5.2 (external release)
++
++CC Labels: REL_20030523_HALdallas_cpmac_01.05.02
++           REL_20030523_HALdallas_cpsar_01.05.02
++
++Bug fixes: 1) PITS #138: CPMAC flooding issue resolved.
++           2) PITS #142: OS may now set "MaxFrags" via Control().  This controls the
++              maximum number of fragments expected by the CPHAL.  The default value is 2 for
++              CPMAC and 1028 for AAL5.  If the OS chooses a RxBufSize that will cause more
++              fragments than the defaults, the OS must set "MaxFrags" to a correct value
++              ((maximum packet length / RxBufSize) + 2).
++           3) PITS #143: Fixed.
++           4) Firmware OAM bug fixed. (new firmware release in this version)
++
++New features: NTR.
++
++Known issues not addressed in this release:
++              1) The Linux SAR driver is seeing an issue in which it cannot
++                 reliably send traffic simultaneously on both the high and
++                 low priority queues of a single AAL5 channel. (TurboDSL)
++
++14 May 2003         CPHAL 1.5.1 (external release)
++
++CC Labels: REL_20030514_HALdallas_cpmac_01.05.01
++           REL_20030514_HALdallas_cpsar_01.05.01
++
++Bug fixes:    1) PITS 132 - (CPMAC) Frames < 60 bytes and split into
++                             multi-fragments.
++              2) BCIL MR PSP00000353 - (CPMAC) PhyDev not free'd on halClose()
++              3) PITS 113 - OsSetup bug in ChannelSetup fixed.
++              4) Fixed AAL5 to check return values of InitTcb/InitRcb.
++              5) Fixed Shutdown to properly free resources in the case of a Close
++                 mode 1 followed by Shutdown.  Previously, buffer and descriptor
++                 resources were left unfreed in this case.
++
++New features: 1) AAL5 Send() modified to be capable of accepting ATM header as first four
++                 bytes of first fragment.  This allows the OS to "override" the
++                 default ATM header which is constructed from preconfigured channel
++                 parameters.
++              2) AAL5 Receive() modified to be capable of passing the received ATM header (4 bytes, no HEC)
++                 in the first fragment (by itself).  It also passes up the OS an indication
++                 of what the received packet type was.  For Host OAM and transparent mode
++                 packets, the ATM header is passed in this manner, and for other types of packets
++                 (AAL5, NULL AAL) no ATM header is passed currently.
++
++Known issues not addressed in this release:
++              1) The Linux SAR driver is seeing an issue in which it cannot
++                 reliably send traffic simultaneously on both the high and
++                 low priority queues of a single AAL5 channel.
++
++30 April 2003         CPHAL 1.5.0 (external release)
++
++CC Labels: REL_20030430_HALdallas_cpmac_01.05.00
++           REL_20030430_HALdallas_cpsar_01.05.00
++
++Bug fixes:   1) Fixed AAL5 bug that rendered the low priority queue
++                unusable.
++             2) Fixed a bug in AAL5's Oam Rate calculations.
++             3) Fixed use of "DeviceCPID" key in AAL5's halControl().
++             4) Fixed RxReturn logic in HAL.  The HAL now can handle
++                failing MallocRxBuffer calls when multiple fragments
++                are being used.
++
++New features: 1) AAL5 Stats now available on a per queue basis.
++              2) AAL5 adds two new keys to halControl() for "Set" actions:
++                 RxVc_OamCh and RxVp_OamCh.
++              3) Shutdown() has been modified for both AAL5 and CPMAC to
++                 call Close() if the module is still in the Open state.
++              4) CPMAC adds the following access keys to halControl():
++                 hcPhyAccess,hcPhyNum,hcCpmacBase,hcSize,and hcCpmacSize.
++              5) CPHAL no longer requests an extra 15 bytes on data buffer
++                 mallocs.
++
++Known issues not addressed in this release:
++              1) The Linux SAR driver is seeing an issue in which it cannot
++                 reliably send traffic simultaneously on both the high and
++                 low priority queues of a single AAL5 channel.
++
++21 April 2003         CPHAL 1.4.1 (external release)
++
++CC Labels: REL_20030421_HALdallas_cpmac_01.04.01
++           REL_20030421_HALdallas_cpsar_01.04.01
++
++Bug fixes:   1) Fixed OAM logic in SAR portion of CPHAL.
++
++New features: 1) OAM loopback counters exposed through halControl.
++              2) Host OAM Send() can now use a single channel to send
++                 OAM cells on unlimited number of VP's/VC's.
++              3) CPHAL now requests "SarFreq" through osControl.
++              4) CPHAL now calculates all OAM function rates based on
++                 "SarFreq"; function OamRateConfig removed for API.
++              5) New OAM function OamLoopbackConfig, used for configuring
++                 loopback functions in firmware OAM mode.
++
++Known issues not addressed in this release:  Bug fix 1) in release 1.4
++             (see below) does not work properly for multiple fragments.
++
++10 April 2003         CPHAL 1.4 (external release)
++
++CC Labels: REL_20030410_HALdallas_cpmac_01.04.00
++           REL_20030410_HALdallas_cpsar_01.04.00
++
++This release is for SAR and MAC.
++
++  Bug fixes: 1) Implemented logic in HAL to re-request buffer mallocs
++                in the case of MallocRxBuffer failing.  The HAL now maintains
++                a NeedsBuffer queue of all RCB's that are without buffers.
++                On interrupts, or on Send(), the HAL checks to see if any
++                RCB's are on the queue, and if so, calls MallocRxBuffer
++                to attempt to get a new buffer and return the RCB to
++                circulation.
++             2) SAR now properly returns all error codes from halOpen and
++                halChannelSetup.
++
++  New features: NTR
++
++  Known issues not addressed in this release: NTR
++
++08 April 2003         CPHAL 1.3.1 (internal release - SAR only)
++
++  CC Labels: REL_20030408_HALdallas_cpsar_01.03.01
++
++  This is a SAR only release.  The current CPMAC release is still 1.3.
++
++  Bug fixes: 1) PDSP State RAM / Scratchpad RAM is now completely cleared after reset.
++                This resolves a stability issue.
++
++  New features: 1) OamMode is now a parameter in halControl().  Both "Set" and "Get"
++                   actions are available.  The value may be "0" (Host OAM), or "1"
++                   (Firmware OAM).
++
++  Known issues not addressed in this release:
++             1) Appropriate action for HAL in the case of MallocRxBuffer failing.  We
++                are investigating whether the HAL should implement a needs buffer
++                queue.
++
++04 April 2003         CPHAL 1.3 (external release)
++
++  CC Labels: REL_20030404_HALdallas_cpmac_01.03.00
++             REL_20030404_HALdallas_cpsar_01.03.00
++             REL_20030404_HALdallas_cpaal5_01.03.00
++             REL_20030404_HALdallas_cpaal2_01.03.00
++
++  This release requires no changes for the ethernet end driver.  The changes necessary
++  for the sar driver (firmware file name changes) have already been implemented.
++
++  Bug fixes: 1) RxReturn now returns an error if MallocRxBuffer fails.  On RxReturn error, the driver should
++                call RxReturn again at a later time (when the malloc may succeed) in order for the CPHAL
++                to maintain a full complement of Rx buffers.  We recommend holding off making this driver
++                change until we verify that this condition occurs.
++
++  New features: 1) Removed benign compiler warnings.
++                2) PITS 122: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=122
++                3) Cpsar label (above) now is applied to everything
++                   beneath /cpsar.
++                4) PITS 14: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=14
++                   Transferred to MR PSP 00000089.
++                5) PITS 120: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=120
++
++  Known issues not addressed in this release:
++             1) PITS 102 (as relating to OamMode configuration):
++                http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=102
++                Future release will make OamMode configurable
++                through halControl(), not on per channel basis.
++
++20 March 2003         CPHAL 1.2.1 (internal release)
++
++  CC Labels: REL_20030320_HALdallas_cpmac_01.02.01
++             REL_20030320_HALdallas_cpsar_01.02.01
++             REL_20030320_HALdallas_cpaal5_01.02.01
++             REL_20030320_HALdallas_cpaal2_01.02.01
++
++  Bug fixes: 1. Fixed modification of buffer pointer following
++                MallocRxBuffer in cppi.c.
++             2. Removed extra firmware files from /cpsar.
++
++  New features: NTR.
++
++  Known issues not addressed in this release: NTR.
++
++07 March 2003         CPHAL 1.2 (external release)
++
++  CPMAC/CPSAR feature complete release.  SAR added
++  several features including full OAM support and various
++  other features and bug fixes to address PITS 99-106, and
++  114.  CPMAC cleaned up details raised by India PSP
++  team.
++
++29 January 2003       CPHAL RC 3.01a (external release)
++
++  Corrects non-static functions to be static in cppi.c.
++
++09 Janurary 2003      CPHAL RC 3.01 (external release)
++
++  PITS 88: Fixed MDIO re-connection problem (hcpmac.c)
++  PITS 90: Corrected Rx Buffer Pointer modification (cppi.c)
++
++  Corrected error in cpremap.c
++
++20 December 2002      CPHAL RC 3 (external release)
++
++  Statistics support via halControl().  See Appendix A of guide.
++  Fixed errors in ChannelTeardown/ChannelSetup CPHAL logic.
++  Added multicast support as requested.
++  Several new OS string functions added to OS_FUNCTIONS.
++  "DebugLevel" configuration parameter changed to "Debug".
++  "Stats0" changed to "StatsDump" for CPMAC.
++
++13 December 2002      CPHAL RC 2.03 (internal release)
++
++  Performance improvements.
++  More debug statements implemented (esp AAL5).
++  Updated makefile with "make debug" option.
++  Hbridge performance: [debug library] 15774 tps (53% line rate)
++                   [non-debug library] 13700 tps (46%)
++
++10 December 2002      CPHAL Release Candidate 2.02 (internal release)
++
++ Much of the configuration code internal to CPMAC and AAL5 has been made common.
++ [os]Receive API had been modified to remove OsReceiveInfo.  This information is now
++   available as third member of the FRAGLIST structure, on a per buffer basis.
++ Successfully tested multi-fragment support on CPMAC, using 32 byte buffers.
++ Code is now Emerald compliant - all buffer descriptors now aligned to cache-line
++   boundaries.
++
++2 December 2002      CPHAL Release Candidate 2.01
++
++ Updates to comments in hcpmac.c, cpmdio.c, hcpmac.h
++ Nested comment in hcpmac.c in RC2 can cause compile errors.
++
++25 November 2002      CPHAL Release Candidate 2
++
++Project Items not completed for RC2
++#6  Ship as Library -  Once under CC. Moved to RC3
++#8  Under Clearcase -  Moved to RC3
++#25 Emerald compliant - Moved to RC3
++#26 Statistics support - Moved to RC3 (some support in RC2)
++#36 Debug scheme implemented - Moved to RC3 (some support in RC2)
++
++8 November 2002       CPHAL Release Candidate 1
++
++Notes:
++
++Project Items not completed for RC1
++
++#8  Under Clearcase -  Clearcase server failure this week. Moved to RC2
++#6  Ship as Library -  Once under CC. Moved to RC2
++#13 Verify Datatypes. Moved to RC2
++#14 Review APIs.  Moved to RC2
++
++APIs under review for RC2
++
++halIsr()
++hslRxReturn()
++halSend()
++osSendComplete()
++osReceive()
++
++
++CPMAC Build Instructions
++
++Compile the file 'hcpmac.c'.
++
++
++AAL5 Build Instructions
++
++The AAL5 build is composed of the source files aal5sar.c and cpsar.c.
++Refer to the provided makefile for an example of compiling these files
++into a library.
++
++Example CPHAL Code
++
++CPMAC:
++
++Example CPMAC code is provided in the file hbridge.c.
++This program is provided simply as an example of using the CPHAL API.
++It is not intended to be compiled and executed in your environment.
++
++AAL5:
++
++Example AAL5 code is provided in the file loopback.c.  This program
++is provided simply as an example of using the CPHAL API.  It is not
++intended to be compiled and executed in your environment.
++
++
++Performance Baseline
++
++
++Cpmac
++
++RC1: hbridge.bin, running with IXIA cpahl_1.cfg.
++     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
++     MIPS core 4Kc.
++
++RC2: hbridge.bin, running with IXIA cpahl_1.cfg.
++     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
++     MIPS core 4Ke.
++     CPHAL now includes Emerald support, but this has been disabled by using 'cache -wt' to emulate 4Kc.
++
++RC3: hbridge.bin, running with IXIA cpahl_1.cfg.
++     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
++     MIPS core 4Ke.
++     Running as Emerald processor.
++
++Release  Total Receive Rate    Throughput Setting
++
++RC1             11300                 38%
++RC2              9524                 32%
++RC3             15190                 51%
+diff -urN linux.old/drivers/net/Config.in linux.dev/drivers/net/Config.in
+--- linux.old/drivers/net/Config.in	2005-07-12 03:20:45.726149872 +0200
++++ linux.dev/drivers/net/Config.in	2005-07-12 02:48:42.180573000 +0200
+@@ -25,6 +25,24 @@
+ comment 'Ethernet (10 or 100Mbit)'
+ bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
+ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
++   if [ "$CONFIG_MIPS_TITAN" = "y" -o "$CONFIG_AR7" = "y" ]; then
++        tristate '  Texas Instruments Avalanche CPMAC support' CONFIG_MIPS_AVALANCHE_CPMAC	
++   fi
++   if [ "$CONFIG_MIPS_AVALANCHE_CPMAC" != "n" ]; then
++     if [ "$CONFIG_AR7WRD" = "y" -o "$CONFIG_AR7VWI" = "y" -o "$CONFIG_AR7VW" = "y" ]; then
++	 define_bool  CONFIG_MIPS_CPMAC_INIT_BUF_MALLOC y
++         define_int CONFIG_MIPS_CPMAC_PORTS 1
++	 if [ "$CONFIG_MIPS_AVALANCHE_MARVELL" = "y" ]; then
++             define_bool CONFIG_AVALANCHE_LOW_CPMAC  n
++             define_bool CONFIG_AVALANCHE_HIGH_CPMAC y
++	 else
++             define_bool CONFIG_AVALANCHE_CPMAC_AUTO y
++             define_bool CONFIG_AVALANCHE_LOW_CPMAC n
++             define_bool CONFIG_AVALANCHE_HIGH_CPMAC n
++	fi
++     fi
++   fi
++
+    if [ "$CONFIG_ARM" = "y" ]; then  
+       dep_bool '  ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110
+       tristate '  Cirrus Logic CS8900A support' CONFIG_ARM_CIRRUS
+diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
+--- linux.old/drivers/net/Makefile	2005-07-12 03:20:45.726149872 +0200
++++ linux.dev/drivers/net/Makefile	2005-07-12 02:48:42.181573000 +0200
+@@ -56,6 +56,16 @@
+ subdir-$(CONFIG_BONDING) += bonding
+ 
+ #
++# Texas Instruments AVALANCHE CPMAC  driver
++#
++
++subdir-$(CONFIG_MIPS_AVALANCHE_CPMAC) += avalanche_cpmac
++#obj-$(CONFIG_MIPS_AVALANCHE_CPMAC) += avalanche_cpmac/avalanche_cpmac.o
++ifeq ($(CONFIG_MIPS_AVALANCHE_CPMAC),y)
++  obj-y += avalanche_cpmac/avalanche_cpmac.o
++endif
++
++#
+ # link order important here
+ #
+ obj-$(CONFIG_PLIP) += plip.o
+--- linux.old/drivers/net/avalanche_cpmac/cpmac.c	2005-08-25 10:56:33.702931008 +0200
++++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c	2005-08-25 11:08:45.027451520 +0200
+@@ -2158,17 +2158,16 @@
+     CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
+     CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
+     struct sk_buff       *p_skb         = fragList[0].OsInfo;
+-    p_skb->len                          = fragList[0].len;    
+ 
+     /* invalidate the cache. */
+     dma_cache_inv((unsigned long)p_skb->data, fragList[0].len);    
+ #ifdef CPMAC_TEST
+-    xdump(p_skb->data, p_skb->len, "recv");
++    xdump(p_skb->data, fragList[0].len, "recv");
+ #endif
+ #ifdef CPMAC_8021Q_SUPPORT
+     /* 802.1q stuff, just does the basic checking here. */
+     if(!p_cpmac_priv->enable_802_1q      &&
+-       p_skb->len > TCI_END_OFFSET       &&
++       fragList[0].len > TCI_END_OFFSET       &&
+        IS_802_1Q_FRAME(p_skb->data + TPID_START_OFFSET))
+     {
+          goto cpmac_hal_recv_frame_mismatch;
diff --git a/openwrt/target/linux/ar7-2.4/patches/004-atm_driver.patch b/openwrt/target/linux/ar7-2.4/patches/004-atm_driver.patch
new file mode 100644
index 0000000..f6a9208
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/patches/004-atm_driver.patch
@@ -0,0 +1,27232 @@
+diff -urN linux.old/drivers/atm/Config.in linux.dev/drivers/atm/Config.in
+--- linux.old/drivers/atm/Config.in	2005-08-22 23:18:37.773532032 +0200
++++ linux.dev/drivers/atm/Config.in	2005-08-23 04:46:50.076846888 +0200
+@@ -99,4 +99,10 @@
+     bool 'Use S/UNI PHY driver' CONFIG_ATM_HE_USE_SUNI
+   fi
+ fi
++#
++# Texas Instruments SANGAM ADSL/ATM support
++#
++if [ "$CONFIG_AR7" = "y" ]; then
++     tristate 'Texas Instruments SANGAM ATM/ADSL support' CONFIG_MIPS_SANGAM_ATM
++fi
+ endmenu
+diff -urN linux.old/drivers/atm/Makefile linux.dev/drivers/atm/Makefile
+--- linux.old/drivers/atm/Makefile	2005-08-22 23:18:37.773532032 +0200
++++ linux.dev/drivers/atm/Makefile	2005-08-23 04:46:50.077846736 +0200
+@@ -14,6 +14,32 @@
+ obj-$(CONFIG_ATM_NICSTAR) += nicstar.o
+ obj-$(CONFIG_ATM_IDT77252) += idt77252.o
+ 
++ifeq ($(CONFIG_AR7),y)
++
++subdir-$(CONFIG_MIPS_SANGAM_ATM) += sangam_atm
++
++EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT
++#EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP
++
++ifeq ($(ANNEX),B)
++EXTRA_CFLAGS += -DANNEX_B -DB
++else
++ifeq ($(ANNEX),C)
++EXTRA_CFLAGS += -DANNEX_C -DC
++else
++EXTRA_CFLAGS += -DANNEX_A -DP
++endif
++endif
++
++list-multi	:= tiatm.o
++tiatm-objs	:= sangam_atm/tn7atm.o sangam_atm/tn7dsl.o sangam_atm/tn7sar.o \
++	sangam_atm/dsl_hal_api.o sangam_atm/dsl_hal_support.o sangam_atm/cpsar.o \
++	sangam_atm/aal5sar.o
++
++obj-$(CONFIG_MIPS_SANGAM_ATM) += sangam_atm/tiatm.o
++
++endif
++
+ ifeq ($(CONFIG_ATM_NICSTAR_USE_SUNI),y)
+   obj-$(CONFIG_ATM_NICSTAR) += suni.o
+ endif
+diff -urN linux.old/drivers/atm/sangam_atm/aal5sar.c linux.dev/drivers/atm/sangam_atm/aal5sar.c
+--- linux.old/drivers/atm/sangam_atm/aal5sar.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/aal5sar.c	2005-08-23 04:46:50.080846280 +0200
+@@ -0,0 +1,2962 @@
++
++/**
++ *  
++ *  aal5sar.c
++ *
++ *  TNETDxxxx Software Support\n
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  version
++ *      28Feb02 Greg       1.00  Original Version created.\n 
++ *      06Mar02 Greg       1.01  Documentation (Doxygen-style) enhanced
++ *      06May02 Greg       1.02  AAL2 added
++ *      06Jun02 Greg       1.03  Multiple API and bug fixes from emulation
++ *      12Jul02 Greg       1.04  API Update
++ */
++
++/**
++@defgroup CPHAL_Functions CPHAL Functions
++
++These are the CPHAL Functions.
++*/
++
++/**
++@page CPHAL_Implementation_Details
++
++@section cphal_intro Introduction
++
++The CPHAL API described above is generally applicable to all modules.  Any
++implementation differences will be described in the following module-specific
++appendix sections.  
++
++Included for your reference is a diagram showing the internal architecture
++of the CPHAL:
++
++@image html SangamSoftware.jpg "HAL Architecture"
++@image latex SangamSoftware.jpg "HAL Architecture" height=2.8in
++
++*/
++
++/**
++@defgroup AAL5_Functions Additional Functions for AAL5 Implementation
++
++These functions are used only by the AAL5 module.
++*/
++
++/*
++@defgroup CPMAC_Functions Additional Functions for CPMAC Implementation
++
++No additional functions currently defined.
++*/
++
++/**
++@page VDMA_Implementation_Details
++
++@section vdma_intro Introduction
++
++The VDMA-VT module facilitates efficient transfer of data (especially voice)
++between two devices, as shown in the figure below.
++
++@image html vdma.jpg "VDMA System Block Diagram"
++@image latex vdma.jpg "VDMA System Block Diagram" height=1in
++
++The VDMA-VT module supports two modes of operation: mirror mode and credit mode.
++Mirror mode is intended for systems in which the remote device does not have a
++VDMA-based module.  Credit mode is intended for highest performance when VDMA-based
++modules exist on both ends of an interface.
++
++For more detailed information on the operation of the VDMA module, please
++reference the VDMA Module Guide.
++
++@section vdma_channels VDMA Channels
++
++The VDMA-VT module is a single channel, single transmit queue device.  Therefore,
++when using the CHANNEL_INFO structure, the correct value for @c Ch is always 0.
++Correspondingly, the correct value for the @c Ch parameter in @c ChannelTeardown() is
++always 0.  Further, when calling @c Send(), the driver should always supply the value
++of 0 for both the @c Ch and @c Queue parameters.
++
++For the VDMA-VT, configuring the channel requires the configuration of either 2 FIFO 
++elements (in credit mode) or 4 FIFO elements (in mirror mode).  For credit mode, the
++driver must configure just the local Tx and Rx FIFOs.  For mirror mode, the driver must
++configure the Tx and Rx FIFOs for both the remote and local ends of the interface.
++
++This channel configuration is accomplished through multiple calls to @c ChannelSetup().
++Each call configures a single FIFO, according to the parameters in the CHANNEL_INFO
++structure.  The members of VDMA-VT's CHANNEL_INFO structure are defined below.
++
++
++- int RemFifoAddr; Address of remote FIFO (mirror mode only).  Set to 0 for credit mode.
++- int FifoAddr;    Address of the local FIFO.  If 0, the CPHAL will allocate the FIFO.
++- int FifoSize;    Size of the FIFO.
++- int PollInt;     Polling interval for the FIFO.
++- int Endianness;  Endianness of the FIFO.  If 1, big endian.  If 0, little endian.
++- int RemAddr;     Used only in credit mode.  This is the base address of the remote
++                   remote VDMA-based device (VDMA-VT or AAL2)
++- int RemDevID;    Used only in credit mode.  Identifies the type of remote VDMA-based device.
++                   0=VDMAVT, 1=AAL2 Ch0, 2=AAL2 Ch1, 3=AAL2 Ch2, 4= AAL2 Ch3.       
++
++For the VDMA-VT module, the driver must make all calls to @c ChannelSetup() prior to calling
++@c Open().  This is because several of the channel specific parameters may not be changed
++while the VDMA-VT module is operational.
++
++@section vdma_params VDMA Parameters
++
++Defined here are the set of parameters for the VDMA-VT module.  Default settings for
++each parameter should be represented in the device configuration file (options.conf).
++During @c Init(), the CPHAL will reference the device configuration file and load all
++default settings.  The @c Control() interface gives the driver an opportunity to
++modify any default settings before the module becomes operational during the @c Open()
++call.
++
++@param NoTxIndication  If 1, the CPHAL will not call @c SendComplete(). 0 is default.
++@param NoRxIndication  If 1, the CPHAL will not call @c Receive(). 0 is default.
++@param RemoteCPU       If 1, the CPHAL will not directly manipulate data in FIFO's, leaving
++                       that task for a remote CPU. 0 is default.
++@param RxIntEn         If 1, enables Rx interrupts.  0 is default.
++@param TxIntEn         If 1, enables Tx interrupts.  0 is default.
++@param Mirror          If 1, enables mirror mode.  0 selects credit mode (default).
++@param RxIntCtl        Valid only in mirror mode.  If 1, interrupts will occur when the Rx FIFO
++                       RdIndex is updated.  If 0, interrupts occur when the Rx FIFO WrIndex
++                       is updated.
++@param TxIntCtl        Valid only in mirror mode.  If 1, interrupts will occur when the Rx FIFO
++                       RdIndex is updated.  If 0, interrupts occur when the Rx FIFO WrIndex
++                       is updated.
++@param RBigEn          Remote big endian mode.  If 1, remote is big endian.
++@param LBigEn          Local big endian mode.  If 1, local is big endian.
++
++@section vdma_polling Using VDMA-VT without interrupts
++
++If your system configuration does not utilize VDMA interrupts, the ability to process the
++Tx and Rx FIFOs is supported.  To process the Tx FIFO, call @c CheckTx().  If the CPHAL is
++able to process any complete data transmissions, it will call @c SendComplete() as usual.  
++To process the Rx FIFO, call @c CheckRx().  If the CPHAL has received any data, it will
++call @c Receive() to pass the driver the data.  Please reference @ref VDMA_Functions for more
++information on these interfaces.
++
++@section vdma_details VDMA Implementation Details
++
++The following functions are not defined for use with VDMA:  @c Status(), @c Tick(), @c StatsGet(),
++and @c StatsClear().
++
++*/
++
++/**
++@page AAL5_Implementation_Details
++
++@section aal5_ver Version
++
++@copydoc AAL5_Version
++
++@section aal5_intro Introduction
++
++The AAL5 implementation will support 16 channels for transmit and 16 channels for
++receive.  Each of the transmit channels may have up to two transmit queues
++associated with it.  If two queues are used, Queue 0 is the high priority queue,
++and Queue 1 is the low priority queue.
++
++@section aal5_params AAL5 Configuration Parameters
++
++AAL5 requires two device entries to be available in the configuration repository, named
++@p "aal5" and @p "sar".  The @p aal5 device entry must contain @p base (base address)
++and @p int_line (interrupt number). The @p sar device entry must have both @p base 
++(base address) and @p reset_bit (reset bit).
++
++@par Device Level Configuration Parameters
++
++The following parameters are device-level parameters, which apply across all
++channels.  The value for these parameters may be modified by changing the value in the
++configuration repository.  
++
++- "UniNni":  
++AAL5 network setting. 0 = UNI (default), 1 = NNI.
++
++@par Channel Configuration Parameters
++
++All AAL5 channel parameters may also be configured through the @c ChannelSetup() interface.
++Following is the list of @p CHANNEL_INFO members that may be modified by the driver when 
++calling @c ChannelSetup().  The driver may provide a value of 0xFFFFFFFF for any channel 
++parameter to select a default value for the parameter.  The driver should at a minimum 
++configure @p Vci and @p Vpi.  The usage of all parameters beginning with TxVc_,
++TxVp_, RxVc_, RxVp_ is described in greater detail in the SAR Firmware Spec.
++These parameters are mainly associated with QoS and OAM functionality.
++
++- "RxNumBuffers":    
++The number of Rx buffer descriptors to allocate for Ch.  
++- "RxBufSize":         
++Size (in bytes) for each Rx buffer.
++- "RxBufferOffset":   
++Number of bytes to offset rx data from start of buffer (must be less than buffer size).
++- "RxServiceMax":    
++Maximum number of packets to service at one time.
++- "TxNumBuffers":      
++The number of Tx buffer descriptors to allocate for Ch.
++- "TxNumQueues":        
++Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. 
++- "TxServiceMax":       
++Maximum number of packets to service at one time. 
++- "CpcsUU":         
++The 2-byte CPCS UU and CPI information.
++- "Gfc":    
++Generic Flow Control.  Used in ATM header of Tx packets.
++- "Clp":   
++Cell Loss Priority.  Used in ATM header of Tx packets.
++- "Pti":   
++Payload Type Indication.  Used in ATM header of Tx packets.
++- "DaMask":           
++Specifies whether credit issuance is paused when Tx data not available.
++- "Priority":   
++Priority bin this channel will be scheduled within.
++- "PktType":   
++0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2.
++- "Vci":                
++Virtual Channel Identifier.
++- "Vpi":                 
++Virtual Path Identifier.
++- "TxVc_AtmHeader":
++In firmware OAM mode, this
++is the ATM header to be appended to front of firmware generated VC OAM cells for
++this channel.  Note: To generate host OAM cells, call @c Send() with 
++the appropriate mode.
++- "TxVc_CellRate":       
++Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR).
++- "TxVc_QosType":        
++0=CBR,1=VBR,2=UBR,3=UBRmcr.
++- "TxVc_Mbs":            
++Min Burst Size in cells.
++- "TxVc_Pcr":            
++Peak Cell Rate for VBR in clock ticks between transmissions.
++- "TxVc_OamTc":   
++TC Path to transmit OAM cells for TX connections (0,1).
++- "TxVc_VpOffset":   
++Offset to the OAM VP state table for TX connections.  Channels with the same
++VPI must have the same VpOffset value.  Channels with different VPIs
++must have unique VpOffset values.
++- "RxVc_OamCh":   
++Channel to which to terminate received OAM cells to be forwarded to the Host
++for either Host OAM mode, or when RxVc_OamToHost is enabled during Firmware
++OAM mode.
++- "RxVc_OamToHost":   
++Indicates whether to pass received unmatched OAM loopback cells to the host;
++0=do not pass, 1=pass.
++- "RxVc_AtmHeader":   
++ATM Header placed on firmware gen'd OAM cells for this channel on a Rx 
++connection (must be big endian with 0 PTI).
++- "RxVc_OamTc":   
++TC Path to transmit OAM cells for RX connections (0,1).
++- "RxVc_VpOffset":   
++Offset to the OAM VP state table for RX connections.  Channels with the same
++VPI must have the same VpOffset value.  Channels with different VPIs
++must have unique VpOffset values.
++- "TxVp_OamTc":   
++TC Path to transmit OAM cells for TX VP connections (0,1).
++- "TxVp_AtmHeader":   
++ATM Header placed on firmware gen'd VP OAM cells for this channel on a Tx VP
++connection (must be big endian with 0 VCI).
++- "RxVp_OamCh":   
++Channel to which to terminate received OAM cells to be forwarded to the Host
++for either Host OAM mode, or when RxVc_OamToHost is enabled during Firmware
++OAM mode.
++- "RxVp_OamToHost":   
++Indicates whether to pass received unmatched OAM loopback cells to the host;
++0=do not pass, 1=pass.
++- "RxVp_AtmHeader":
++In firmware OAM mode, this
++is the ATM header to be appended to front of firmware generated VP OAM cells for
++this channel.  Note: To generate host OAM cells, call @c Send() with 
++the appropriate mode.
++- "RxVp_OamTc":   
++TC Path to transmit OAM cells for RX VP connections (0,1).
++- "RxVp_OamVcList":   
++This 32-bit field is one-hot encoded to indicate all the VC channels that are
++associated with this VP channel.  A value of 21 will indicate that VC
++channels 0, 2, and 4 are associated with this VP channel.
++- "FwdUnkVc":
++Indicates whether or not to forward unknown VCI/VPI cells to the host.  This 
++parameter only takes effect if the channel's PktType is Transparent(3).
++1=forwarding enabled, 0=forwarding disabled.
++
++@section aal5_details API Implementation Details
++
++ATTENTION: Documentation given here supplements the documentation given in the general
++CPHAL API section.  The following details are crucial to correct usage of the
++AAL5 CPHAL.
++
++@par Receive()
++The least significant byte of @p Mode contains the channel number.  Bit 31
++indicates whether or not the ATM header is present in the first fragment of
++the packet.  If bit 31 is set, the 4 byte ATM header (minus HEC) will be provided 
++in the first fragment, with the payload beginning in the second fragment.  Currently,
++this is the default behavior for host OAM and transparent mode packets.
++Bits 17-16 indicate the packet type that is being received.  
++Mode Parameter Breakdown: <BR>
++- 31     ATM Header In First Fragment (1=true, 0=false) <BR>
++- 30-18  Unused. <BR>
++- 17-16  Pkt Type. <BR>
++  -   0=AAL5 <BR>
++  -   1=PTI Based Null AAL <BR>
++  -   2=OAM <BR>
++  -   3=Transparent <BR>
++- 15-08  Unused. <BR>
++- 07-00  Channel Number.
++
++@par Send()
++The most significant 16 bits of the first fragment 'len' is used as the Offset 
++to be added to the packet.  @c Send() will reserve this many bytes at the 
++beginning of the transmit buffer prior to the first byte of valid data.
++For the @p Mode parameter, Bit 31 must be set if the user has sent a packet with
++the ATM Header (minus HEC) embedded in the first 4 bytes of the first fragment data buffer.
++The OS has the option of using a 4 byte first fragment containing only ATM header,
++or concatenating the ATM Header in front of the data payload.
++If Bit 31 is set, the ATM Header in the buffer is preserved and sent with
++each cell of the packet.  Otherwise, Send() will build the ATM header based on the
++values of the Pti, Gfc, Clp, Vpi, and Vci parameters for the given channel.
++Bits 17-16 are defined as the packet type.  Bits 15-08 may be used to specify the 
++transmit queue to send the packet on.  Only values 0 (high priority) and 1 (low 
++priority) are accepted.  Bits 07-00 should be used to indicate the channel number 
++for the @c Send() operation.  Valid channel numbers are 0-15.
++Mode Parameter Breakdown: <BR>
++- 31     ATM Header In Packet (1=true, 0=false) <BR>
++- 30-18  Unused. <BR>
++- 17-16  Pkt Type. <BR>
++  -   0=AAL5 <BR>
++  -   1=PTI Based Null AAL <BR>
++  -   2=OAM <BR>
++  -   3=Transparent <BR>
++- 15-08  Transmit Queue. <BR>
++- 07-00  Channel Number.
++  
++@par ChannelSetup()
++The AAL5 @c ChannelSetup() always configures both the Tx and Rx side of the channel
++connection in the same call.
++
++@par ChannelTeardown()
++Regardless of the channel teardown direction selected, the AAL5 CPHAL will always
++teardown both the Tx and Rx side of the channel connection.
++
++@par TeardownComplete()
++The value for the @p Direction parameter should be ignored for the AAL5 implementation,
++since both directions (Tx and Rx) are always torndown in response to a @c ChannelTeardown()
++command.
++
++@par Control() (HAL version)
++Defined keys and actions.  Unless otherwise stated, the data type
++for Value is pointer to unsigned integer.  The list is broken into
++three groups, one group which can be used anytime, one group that should
++be used before halOpen(), and one group which can only be used after 
++halOpen() (but before halClose()).  For channelized parameters, replace
++'Ch' with the integer number of a channel (ex. "Gfc.4" can be used to set
++Gfc for channel 4).
++
++MAY USE ANYTIME AFTER INIT (after halInit() is called):
++
++- "Gfc.Ch".  The OS may "Set" this value.  Changing this value causes
++the Gfc in each Tx ATM header for this channel to take on the new Gfc value.
++
++- "Clp.Ch".  The OS may "Set" this value.  Changing this value causes
++the Clp in each Tx ATM header for this channel to take on the new Clp value.
++
++- "Pti.Ch".  The OS may "Set" this value.  Changing this value causes
++the Pti in each Tx ATM header for this channel to take on the new Pti value.
++
++- "CpcsUU.Ch".  The OS may "Set" this value.  Changing this value causes
++the CpcsUU in each Tx ATM header for this channel to take on the new CpcsUU value.
++
++- "OamMode".  Specifies if host or firmware is performing OAM functions; 0 = Host OAM, 
++1 = Firmware OAM.  When set, all SAR channels will be configured for
++the selection, including AAL2 channels.
++
++- "OamLbTimeout".  Specifies the firmware OAM loopback timeout, in milliseconds.
++
++- "DeviceCPID".  The OS may "Set" this value.  This is the OAM connection 
++point identifier.  The OS should provide a pointer to an array of 4 32-bit
++integers.  Each word must be configured in big endian format.
++
++- "FwdUnkVc.Ch".  Indicates whether or not to forward unknown VCI/VPI cells to the host.
++This parameter only takes effect if the channel's PktType is Transparent(3).
++1=forwarding enabled, 0=forwarding disabled.
++
++MAY USE ONLY BEFORE HAL IS OPEN (before halOpen() call):
++- "StrictPriority". The OS may "Set" this value.  Setting to 1 causes
++a different interrupt processing routine to be used, which gives strict
++priority to channels with lower numbers (channel 0 has highest priority).
++The default handler gives equal priority to all channels.
++
++- "MaxFrags".  The OS may "Set" or "Get" this value.  This defines the maximum
++number of fragments that can be received by the AAL5 Rx port.  The default
++value for AAL5 is 46.  This provides enough space to receive a maximum
++length AAL5 packet (65,568 bytes) with the default buffer size of 1518 bytes, and
++any amount of RxBufferOffset.  If the buffer size is configured to be smaller,
++the OS *MUST* modify this parameter according to the following formula: 
++((System Max AAL5 packet length)/(RxBufSize)) + 2.  (The extra two fragments in
++the formula allow for RxBufferOffset and one fragment for the ATM Header, used
++when receiving host OAM or transparent mode packets)
++
++MAY USE ONLY AFTER HAL IS 'OPEN' (after halOpen() call):
++- "Stats;Level;Ch;Queue".  The OS may "Get" Stats groups with this key, where 
++'Level' is an integer from 0-4, Ch is an integer from 0-15, and Queue is
++an integer from 0-1.  Note that Ch is not required for Level 4 stats, and Queue
++is not required for Level 0, 3, and 4.  The statistics functionality and return 
++value is described in the appendix entitled "Configuration and Control".
++
++- "TxVc_CellRate.Ch".  The OS may "Set" this value.  Can be used to modify
++CellRate for a channel on the fly.
++
++- "TxVc_Mbs.Ch".  The OS may "Set" this value.  Can be used to modify
++Mbs for a channel on the fly.
++
++- "TxVc_Pcr.Ch".  The OS may "Set" this value.  Can be used to modify
++Pcr for a channel on the fly.
++
++- "PdspEnable".  The OS may "Set" this value.  Value 0 disables the PDSP.
++Value 1 enables to PDSP.
++
++- "DeviceCPID".  The OS may "Set" this value.  The Value should be an array
++of 4 32-bit integers that comprise the CPID.  
++
++- "RxVc_RDICount.Ch".  The OS may "Get" or "Set" this value.  Get returns
++the current RDI count for the VC channel.  Set clears the counter, and the Value
++is ignored.
++
++- "RxVp_RDICount.Ch".  The OS may "Get" or "Set" this value.  Get returns
++the current RDI count for the VP channel.  Set clears the counter, and the Value
++is ignored.
++
++- "RxVc_AISseg.Ch". The OS may "Get" this value.  This is an indication of
++AIS segment error for the VC channel.
++
++- "RxVp_AISseg.Ch". The OS may "Get" this value.  This is an indication of
++AIS segment error for the VP channel.
++
++- "RxVc_AISetoe.Ch". The OS may "Get" this value.  This is an indication of
++AIS end-to-end error for the VC channel.
++
++- "RxVp_AISetoe.Ch". The OS may "Get" this value.  This is an indication of
++AIS end-to-end error for the VP channel.
++
++- "RxVc_OamCh.Ch". The OS may "Set" this value.  Channel to which to terminate 
++received OAM cells to be forwarded to the Host for either Host OAM mode, or when 
++RxVc_OamToHost is enabled during Firmware OAM mode.
++
++- "RxVp_OamCh.Ch". The OS may "Set" this value.  Channel to which to terminate 
++received OAM cells to be forwarded to the Host for either Host OAM mode, or when 
++RxVp_OamToHost is enabled during Firmware OAM mode.
++
++- "F4_LB_Counter". The OS may "Get" this value.  This is a count of the number
++  of near-end F4 loopbacks performed by the PDSP in firmware OAM mode.
++
++- "F5_LB_Counter". The OS may "Get" this value.  This is a count of the number
++  of near-end F5 loopbacks performed by the PDSP in firmware OAM mode.
++
++- "TxVc_AtmHeader.Ch". The OS may "Set" this value.  In firmware OAM mode, this
++is the ATM header to be appended to front of firmware generated VC OAM cells for
++this channel.  In host OAM mode, this is used as the ATM header to be appended
++to front of host generated VC OAM cells for this channel.  It must be configured
++as big endian with PTI=0.  Note: To generate host OAM cells, call @c Send() with 
++the appropriate mode.
++
++- "TxVp_AtmHeader.Ch". The OS may "Set" this value.  In firmware OAM mode, this
++is the ATM header to be appended to front of firmware generated VP OAM cells for
++this channel.  In host OAM mode, this is used as the ATM header to be appended
++to front of host generated VP OAM cells for this channel.  It must be configured
++as big endian with VCI=0.  Note: To generate host OAM cells, call @c Send() with 
++the appropriate mode.
++
++- "PdspEnable".  The OS may "Set" this value. Controls whether or not the PDSP is 
++allowed to fetch new instructions.  The PDSP is enabled by the CPHAL during Open(), 
++and disabled during Close().  0 = disabled, 1 = enabled.
++
++@par Control() (OS version)
++Defined keys and actions:
++
++- "Firmware".  The CPHAL will perform a "Get" action for the key "Firmware".  A pointer
++to a pointer is passed in @p Value.  The OS must modify the referenced pointer to point
++to the firmware.
++
++- "FirmwareSize".  The CPHAL will perform a "Get" action for the key "FirmwareSize".
++The OS must place the firmware size in the memory pointed at by @p Value.
++
++- "OamLbResult".  When a channel that is in firmware OAM mode is commanded to perform
++a loopback function, the result of the loopback generates an interrupt that is handled
++by the OS like any other interrupt.  The CPHAL, upon servicing the interrupt, will call
++osControl with this key, and an action of "Set".  The @p Value parameter will be a 
++pointer to the integer result.  1 = pass, 0 = fail.
++
++- "SarFreq". The CPHAL will perform a "Get" action for this key.  The OS should place
++the SAR frequency (in Hz) in the memory pointed at by @p Value.
++
++@section aal5_stats AAL5 Specific Statistics
++
++Statistics level '0' contains all AAL5 specific statistics.  The following values will
++be obtained when requesting stats level 0:
++
++- "Crc Errors".  Number of CRC errors reported by SAR hardware.  Incremented for received
++packets that contain CRC errors.  
++
++- "Len Errors".  Number of length errors reported by SAR hardware.  Incremented for received
++packets that are in excess of 1366 cells.
++
++- "Abort Errors".  Number of abort errors reported by SAR hardware.
++
++- "Starv Errors".  Number of buffer starvation errors reported by SAR hardware.  Incremented
++when a part or all of a buffer cannot be received due to lack of RX buffer resources.  The SAR
++drops all cells associated with the packet for each buffer starvation error that occurs.
++
++*/ 
++
++/* register files */
++#include "cp_sar_reg.h"  
++
++#define _CPHAL_AAL5
++#define _CPHAL
++#define _CPPI_TEST /** @todo remove for release */
++#define __CPHAL_CPPI_OFFSET /* support use of offset */
++
++/*  OS Data Structure definitions  */
++
++typedef void OS_PRIVATE;
++typedef void OS_DEVICE;
++typedef void OS_SENDINFO;
++typedef void OS_RECEIVEINFO;
++typedef void OS_SETUP;
++
++/*  CPHAL Data Structure definitions  */
++
++typedef struct hal_device  HAL_DEVICE;
++typedef struct hal_private HAL_PRIVATE;
++typedef struct hal_private HAL_RECEIVEINFO;
++
++/* include CPHAL header files here */
++#include "cpcommon_cpaal5.h"
++#include "cpswhal_cpaal5.h"
++#include "aal5sar.h"
++#include "cpcommon_cpaal5.c"
++    
++#define CR_SERVICE            (170-1)
++#define UTOPIA_PAUSE_REG      (*(volatile bit32u *)0xa4000000)
++
++/* 
++these masks are for the mode parameter used in halSend/OsReceive
++(may move these elsewhere)
++*/
++#define CH_MASK            0xff
++#define PRI_MASK           0x10000 
++  
++/* Rcb/Tcb Constants */
++#define CB_SOF_BIT         (1<<31)
++#define CB_EOF_BIT         (1<<30)
++#define CB_SOF_AND_EOF_BIT (CB_SOF_BIT|CB_EOF_BIT)
++#define CB_OWNERSHIP_BIT   (1<<29)
++#define CB_EOQ_BIT         (1<<28)
++#define CB_SIZE_MASK       0x0000ffff
++#define CB_OFFSET_MASK     0xffff0000
++#define RCB_ERRORS_MASK    0x03fe0000
++#define RX_ERROR_MASK      0x000f0000
++#define CRC_ERROR_MASK     0x00010000
++#define LENGTH_ERROR_MASK  0x00020000
++#define ABORT_ERROR_MASK   0x00040000
++#define STARV_ERROR_MASK   0x00080000
++#define TEARDOWN_VAL       0xfffffffc
++
++/* interrupt vector masks */
++#define TXH_PEND        0x01000000
++#define TXL_PEND        0x02000000
++#define RX_PEND         0x04000000
++#define STS_PEND        0x08000000
++#define AAL2_PEND       0x10000000
++#define INT_PENDING     (TXH_PEND | TXL_PEND | RX_PEND | STS_PEND | AAL2_PEND)
++#define STS_PEND_INVEC  0x0001F000
++#define RX_PEND_INVEC   0x00000F00
++#define TXL_PEND_INVEC  0x000000F0
++#define TXH_PEND_INVEC  0x0000000F
++#define AIS_SEG_MASK    0x1        /* +01.02.00 */
++#define AIS_SEG_SHIFT   0          /* +01.02.00 */
++#define AIS_ETOE_MASK   0x20000    /* +01.02.00 */
++#define AIS_ETOE_SHIFT  17         /* +01.02.00 */
++#define RDI_CNT_MASK    0xffff0000 /* +01.02.00 */
++#define RDI_CNT_SHIFT   16         /* +01.02.00 */
++
++/*
++ *  This function takes a vpi/vci pair and computes the 4 byte atm header
++ *  (minus the HEC).
++ *
++ *  @param  vpi  Virtual Path Identifier.
++ *  @param  vci  Virtual Channel Identifier.
++ *
++ *  @return  A properly formatted ATM header, without the HEC.
++ */ 
++static int atmheader(int gfc, int vpi, int vci, int pti, int clp)
++  {
++   int itmp;
++
++   itmp=0;
++  
++   /* UNI Mode uses the GFC field */
++   itmp |= ((gfc & 0xF) << 28);
++   itmp |= ((vpi & 0xFF) << 20);
++    
++   /* if NNI Mode, no gfc and larger VPI */
++   /*itmp |= ((vpi & 0xFFF) << 20);*/
++
++   itmp|=((vci & 0xFFFF) << 4);
++   itmp|=((pti & 0x7) << 1);
++   itmp|=(clp & 0x1);
++   return(itmp);
++  }
++
++#include "cppi_cpaal5.c"
++
++/*
++ *   Re-entrancy Issues
++ *   In order to ensure successful re-entrancy certain sections of the
++ *   CPHAL code will be bracketed as Critical.
++ *   The OS will provide the function Os.CriticalSection(BOOL), which
++ *   will be passed a TRUE to enter the Critical Section and FALSE to exit.
++ */
++
++/*
++ *  @ingroup CPHAL_Functions
++ *  Clears the statistics information.
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return 0 OK, Non-zero not OK
++ */
++static int StatsClear(HAL_DEVICE *HalDev)
++  {
++   int i;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]StatsClear(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* clear stats */
++   for (i=0; i<NUM_AAL5_CHAN; i++)
++     {
++      HalDev->Stats.CrcErrors[i]=0;
++      HalDev->Stats.LenErrors[i]=0;
++      HalDev->Stats.DmaLenErrors[i]=0;
++      HalDev->Stats.AbortErrors[i]=0;
++      HalDev->Stats.StarvErrors[i]=0;
++      HalDev->Stats.TxMisQCnt[i][0]=0;
++      HalDev->Stats.TxMisQCnt[i][1]=0;
++      HalDev->Stats.RxMisQCnt[i]=0;
++      HalDev->Stats.RxEOQCnt[i]=0;
++      HalDev->Stats.TxEOQCnt[i][0]=0;
++      HalDev->Stats.TxEOQCnt[i][1]=0;
++      HalDev->Stats.RxPacketsServiced[i]=0;
++      HalDev->Stats.TxPacketsServiced[i][0]=0;
++      HalDev->Stats.TxPacketsServiced[i][1]=0;
++      HalDev->Stats.TxMaxServiced[i][0]=0;
++      HalDev->Stats.TxMaxServiced[i][1]=0;
++     }
++   HalDev->Stats.RxTotal=0;
++   HalDev->Stats.TxTotal=0;
++   HalDev->Stats.RxMaxServiced=0;
++   return (EC_NO_ERRORS);
++  }
++
++/*
++ *  Returns statistics information.
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())  
++ *
++ *  @return 0
++ */
++/*
++static STAT_INFO* StatsGet(HAL_DEVICE *HalDev)
++  {
++   STAT_INFO* MyStats = &HalDev->Stats;
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]StatsGet(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   dbgPrintf("HAL Stats:\n");
++   DispStat(HalDev, "Rx Total",MyStats->RxTotal);
++   DispStat(HalDev, "Tx Total",MyStats->TxTotal);
++   DispStat(HalDev, "Rx Peak",MyStats->RxMaxServiced);
++   DispStat(HalDev, "TxH Peak",MyStats->TxMaxServiced[0][0]);
++   DispStat(HalDev, "TxL Peak",MyStats->TxMaxServiced[0][1]);
++   DispChStat(HalDev, "CrcErr",&MyStats->CrcErrors[0],1);
++   DispChStat(HalDev, "LenErr",&MyStats->LenErrors[0],1);
++   DispChStat(HalDev, "DmaLenErr",&MyStats->DmaLenErrors[0],1);
++   DispChStat(HalDev, "AbortErr",&MyStats->AbortErrors[0],1);
++   DispChStat(HalDev, "StarvErr",&MyStats->StarvErrors[0],1);
++   DispChStat(HalDev, "TxH MisQ Cnt",&MyStats->TxMisQCnt[0][0],2);
++   DispChStat(HalDev, "TxL MisQ Cnt",&MyStats->TxMisQCnt[0][1],2);
++   DispChStat(HalDev, "Rx MisQ Cnt",&MyStats->RxMisQCnt[0],1);
++   DispChStat(HalDev, "Rx EOQ Cnt",&MyStats->RxEOQCnt[0],1); 
++   DispChStat(HalDev, "TxH EOQ Cnt",&MyStats->TxEOQCnt[0][0],2);
++   DispChStat(HalDev, "TxL EOQ Cnt",&MyStats->TxEOQCnt[0][1],2);
++   DispChStat(HalDev, "Rx Pkts",&MyStats->RxPacketsServiced[0],1);
++   DispChStat(HalDev, "TxH Pkts",&MyStats->TxPacketsServiced[0][0],2);
++   DispChStat(HalDev, "TxL Pkts",&MyStats->TxPacketsServiced[0][1],2); 
++
++   return (&HalDev->Stats);
++  }
++*/
++
++#ifdef __CPHAL_DEBUG
++void dbgChannelConfigDump(HAL_DEVICE *HalDev, int Ch)
++  {
++   CHANNEL_INFO *HalCh = &HalDev->ChData[Ch];
++   dbgPrintf("  [aal5 Inst %d, Ch %d] Config Dump:\n", HalDev->Inst, Ch);
++   dbgPrintf("    TxNumBuffers  :%08d, TxNumQueues :%08d\n", 
++             HalCh->TxNumBuffers, HalCh->TxNumQueues);
++   dbgPrintf("    RxNumBuffers  :%08d, RxBufSize   :%08d\n", 
++             HalCh->RxNumBuffers, HalCh->RxBufSize);
++   dbgPrintf("    TxServiceMax  :%08d, RxServiceMax:%08d\n", 
++             HalCh->TxServiceMax, HalCh->RxServiceMax);
++   dbgPrintf("    RxBufferOffset:%08d, DaMask      :%08d\n", 
++             HalCh->RxBufferOffset, HalCh->DaMask);
++   dbgPrintf("    CpcsUU        :%08d, Gfc         :%08d\n", 
++             HalCh->CpcsUU, HalCh->Gfc);
++   dbgPrintf("    Clp           :%08d, Pti         :%08d\n", 
++             HalCh->Clp, HalCh->Pti);
++   dbgPrintf("    Priority      :%08d, PktType     :%08d\n", 
++             HalCh->Priority, HalCh->PktType);
++   dbgPrintf("    Vci           :%08d, Vpi         :%08d\n", 
++             HalCh->Vci, HalCh->Vpi);
++   dbgPrintf("    TxVc_CellRate :%08d, TxVc_QosType:%08d\n", 
++             HalCh->TxVc_CellRate, HalCh->TxVc_QosType);
++   dbgPrintf("    TxVc_Mbs      :%08d, TxVc_Pcr    :%08d\n", 
++             HalCh->TxVc_Mbs, HalCh->TxVc_Pcr);
++   dbgPrintf("    TxVc_AtmHeader:%08d\n", 
++             HalCh->TxVc_AtmHeader);
++   osfuncSioFlush();
++  }
++#endif
++
++/*
++ * Retrieves channel parameters from configuration file.  Any parameters
++ * which are not found are ignored, and the HAL default value will apply,
++ * unless a new value is given through the channel structure in the call
++ * to ChannelSetup.
++ */
++static int ChannelConfigGet(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
++  {
++   unsigned int Ret, Value, Ch = HalChn->Channel;
++   OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++   void *ChInfo;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]ChannelConfigGet(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
++                (bit32u)HalChn);
++      osfuncSioFlush();
++     }
++#endif
++
++   Ret=OsFunc->DeviceFindParmValue(HalDev->DeviceInfo, channel_names[Ch], &ChInfo);
++   if (Ret) return (EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_INFO_NOT_FOUND);
++
++   /* i don't care if a value is not found because they are optional */
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxNumBuffers", &Value);
++   if (!Ret) HalDev->ChData[Ch].TxNumBuffers = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxNumQueues", &Value);
++   if (!Ret) HalDev->ChData[Ch].TxNumQueues = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxServiceMax", &Value);
++   if (!Ret) HalDev->ChData[Ch].TxServiceMax = Value;
++   
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxNumBuffers", &Value);
++   if (!Ret) HalDev->ChData[Ch].RxNumBuffers = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxBufferOffset", &Value);
++   if (!Ret) HalDev->ChData[Ch].RxBufferOffset = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxBufSize", &Value);
++   if (!Ret) HalDev->ChData[Ch].RxBufSize = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxServiceMax", &Value);
++   if (!Ret) HalDev->ChData[Ch].RxServiceMax = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "CpcsUU", &Value);
++   if (!Ret) HalDev->ChData[Ch].CpcsUU = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Gfc", &Value);
++   if (!Ret) HalDev->ChData[Ch].Gfc = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Clp", &Value);
++   if (!Ret) HalDev->ChData[Ch].Clp = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Pti", &Value);
++   if (!Ret) HalDev->ChData[Ch].Pti = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "DaMask", &Value);
++   if (!Ret) HalDev->ChData[Ch].DaMask = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Priority", &Value);
++   if (!Ret) HalDev->ChData[Ch].Priority = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "PktType", &Value);
++   if (!Ret) HalDev->ChData[Ch].PktType = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Vci", &Value);
++   if (!Ret) HalDev->ChData[Ch].Vci = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "Vpi", &Value);
++   if (!Ret) HalDev->ChData[Ch].Vpi = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_CellRate", &Value);
++   if (!Ret) HalDev->ChData[Ch].TxVc_CellRate = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_QosType", &Value);
++   if (!Ret) HalDev->ChData[Ch].TxVc_QosType = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_Mbs", &Value);
++   if (!Ret) HalDev->ChData[Ch].TxVc_Mbs = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_Pcr", &Value);
++   if (!Ret) HalDev->ChData[Ch].TxVc_Pcr = Value;
++
++   Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_AtmHeader", &Value);
++   if (!Ret) HalDev->ChData[Ch].TxVc_AtmHeader = Value;
++
++   return (EC_NO_ERRORS);
++  }
++
++/*
++ * Sets up channel parameters in the hardware, and initializes the CPPI
++ * TX and RX buffer descriptors and buffers.
++ */
++static int ChannelConfigApply(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
++  {
++   int j, Ch = HalChn->Channel;
++   volatile bit32u *pTmp;
++   int Ret; /* +GSG 030410 */
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]ChannelConfigApply(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
++                (bit32u)HalChn);
++      osfuncSioFlush();
++     }
++#endif
++
++   if ((HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) || (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE))
++     {
++      return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
++     }
++
++   HalDev->InRxInt[Ch]=FALSE;
++  
++   /* Initialize Queue Data */
++   HalDev->RxActQueueHead[Ch]=0;
++   HalDev->RxActQueueCount[Ch]=0;
++   HalDev->TxActQueueHead[Ch][0]=0;
++   HalDev->TxActQueueHead[Ch][1]=0;
++   HalDev->TxActQueueCount[Ch][0]=0;
++   HalDev->TxActQueueCount[Ch][1]=0;
++   HalDev->RxActive[Ch] = FALSE;
++   HalDev->TxActive[Ch][0] = FALSE;
++   HalDev->TxActive[Ch][1] = FALSE;
++
++   /* Clear Rx State RAM */
++   pTmp = pRX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64);
++   for (j=0; j<NUM_RX_STATE_WORDS; j++)
++     *pTmp++ = 0; 
++     
++   /* Check that Rx DMA State RAM was cleared */
++   pTmp -= NUM_RX_STATE_WORDS;
++   for (j=0; j<NUM_RX_STATE_WORDS; j++)
++     {
++      if (*pTmp++ != 0)
++        {
++         return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_RX_STATE_RAM_NOT_CLEARED);
++        }    
++     } 
++ 
++   /* Clear Tx State RAM */
++   pTmp = pTX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64);
++   for (j=0; j<NUM_TX_STATE_WORDS; j++)
++     *pTmp++ = 0; 
++     
++   /* Check that Tx DMA State RAM was cleared */
++   pTmp -= NUM_TX_STATE_WORDS;
++   for (j=0; j<NUM_TX_STATE_WORDS; j++)
++     {
++      if (*pTmp++ != 0)
++        {
++         return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_TX_STATE_RAM_NOT_CLEARED);
++        }
++     }
++  
++   /* Initialize Tx State RAM (Nothing to do) */
++   
++   /* Initialize Rx State RAM */
++   /* Configure the Rx buffer offset */
++   pTmp=(pRX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64));
++   *pTmp |= (HalDev->ChData[Ch].RxBufferOffset & 0xFF);
++
++   /* Initialize buffer memory for the channel */
++   Ret = InitTcb(HalDev, Ch);
++   if (Ret) return (Ret);
++
++   Ret = InitRcb(HalDev, Ch);
++   if (Ret) return (Ret);
++
++   /* setup interrupt mask/enable for the channel */
++   SAR_TX_MASK_SET(HalDev->dev_base) = (1<<Ch);
++
++   /* if using the low priority queue, set up mask for it */
++   if (HalDev->ChData[Ch].TxNumQueues == 2)            /* +GSG 030421 */
++     SAR_TX_MASK_SET(HalDev->dev_base) = (1<<Ch)<<16;  /* +GSG 030421 */
++
++   SAR_RX_MASK_SET(HalDev->dev_base) = (1<<Ch);
++
++   /* call SAR layer to complete the channel setup - hardware configuration of ch */
++   Ret = HalDev->SarFunc->ChannelSetup(HalDev->SarDev, &HalDev->ChData[Ch]); /* ~GSG 030410 */
++   if (Ret)                                                                  /* +GSG 030410 */
++     return (Ret);                                                           /* +GSG 030410 */
++
++   /* channel officially open for business */
++   HalDev->ChIsOpen[Ch][DIRECTION_TX] = TRUE;
++   HalDev->ChIsOpen[Ch][DIRECTION_RX] = TRUE;
++
++   return (EC_NO_ERRORS);
++  }
++
++/*
++ * Sets up HAL default channel configuration parameter values.
++ */
++static void ChannelConfigInit(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
++  {
++   int Ch = HalChn->Channel;
++   
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]ChannelConfigInit(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
++                (bit32u)HalChn);
++      osfuncSioFlush();
++     }
++#endif
++
++   HalDev->ChData[Ch].Channel        = Ch;
++   HalDev->ChData[Ch].TxNumBuffers   = cfg_tx_num_bufs[Ch];
++   HalDev->ChData[Ch].RxNumBuffers   = cfg_rx_num_bufs[Ch];
++   HalDev->ChData[Ch].RxBufSize      = cfg_rx_buf_size[Ch];
++   HalDev->ChData[Ch].RxBufferOffset = cfg_rx_buf_offset[Ch];
++   HalDev->ChData[Ch].TxNumQueues    = cfg_tx_num_queues[Ch]; 
++   HalDev->ChData[Ch].CpcsUU         = cfg_cpcs_uu[Ch];
++   HalDev->ChData[Ch].DaMask         = cfg_da_mask[Ch];
++   HalDev->ChData[Ch].Priority       = cfg_priority[Ch];
++   HalDev->ChData[Ch].PktType        = cfg_pkt_type[Ch];
++   HalDev->ChData[Ch].Vci            = cfg_vci[Ch];
++   HalDev->ChData[Ch].Vpi            = cfg_vpi[Ch];
++   HalDev->ChData[Ch].TxVc_CellRate  = cfg_cell_rate[Ch];
++   HalDev->ChData[Ch].TxVc_QosType   = cfg_qos_type[Ch];
++   HalDev->ChData[Ch].TxVc_Mbs       = cfg_mbs[Ch];
++   HalDev->ChData[Ch].TxVc_Pcr       = cfg_pcr[Ch];
++   HalDev->ChData[Ch].Gfc            = cfg_gfc[Ch];
++   HalDev->ChData[Ch].Clp            = cfg_clp[Ch];
++   HalDev->ChData[Ch].Pti            = cfg_pti[Ch];
++   HalDev->ChData[Ch].RxServiceMax   = cfg_rx_max_service[Ch];
++   HalDev->ChData[Ch].TxServiceMax   = cfg_tx_max_service[Ch];
++  }
++
++/* 
++ * Update per channel data in the HalDev based channel structure.
++ * If a certain channel parameter has been passed with the HAL_DEFAULT
++ * value (0xFFFFFFFF), then do not copy it. 
++ */
++static void ChannelConfigUpdate(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
++  {
++   int Ch = HalChn->Channel;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]ChannelConfigUpdate(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
++                (bit32u)HalChn);
++      osfuncSioFlush();
++     }
++#endif
++
++   HalDev->ChData[Ch].Channel = Ch;
++
++   /* ChannelUpdate is a macro defined in cpcommon.h.  It requires
++      the presence of the variables named 'Ch' and 'HalChn'.*/
++   ChannelUpdate(DaMask);
++   ChannelUpdate(Priority);
++   ChannelUpdate(PktType);
++   ChannelUpdate(Vci);
++   ChannelUpdate(Vpi);
++   ChannelUpdate(CpcsUU);
++   ChannelUpdate(Gfc);
++   ChannelUpdate(Clp);
++   ChannelUpdate(Pti);
++   /* AAL5 Stuff */
++   ChannelUpdate(TxNumBuffers);
++   ChannelUpdate(RxNumBuffers);
++   ChannelUpdate(RxBufSize);
++   ChannelUpdate(RxBufferOffset);
++   ChannelUpdate(TxNumQueues);
++   ChannelUpdate(TxServiceMax);
++   ChannelUpdate(RxServiceMax);
++   /* PDSP STATE RAM */
++   ChannelUpdate(TxVc_CellRate);
++   ChannelUpdate(TxVc_QosType);
++   ChannelUpdate(TxVc_Mbs);
++   ChannelUpdate(TxVc_Pcr);
++   /* OAM */
++   ChannelUpdate(TxVc_AtmHeader);
++   ChannelUpdate(TxVc_OamTc);
++   ChannelUpdate(TxVc_VpOffset);
++   ChannelUpdate(RxVc_OamCh);
++   ChannelUpdate(RxVc_OamToHost);
++   ChannelUpdate(RxVc_AtmHeader);
++   ChannelUpdate(RxVc_VpOffset);
++   ChannelUpdate(RxVc_OamTc);
++   ChannelUpdate(TxVp_AtmHeader);
++   ChannelUpdate(TxVp_OamTc);
++   ChannelUpdate(RxVp_AtmHeader);
++   ChannelUpdate(RxVp_OamCh);
++   ChannelUpdate(RxVp_OamTc);
++   ChannelUpdate(RxVp_OamToHost);
++   ChannelUpdate(RxVp_OamVcList);
++   ChannelUpdate(FwdUnkVc);
++  }
++
++/**
++ * @ingroup CPHAL_Functions
++ * This function opens the specified channel.  The caller must populate
++ * the @p HalCh structure.  CPHAL default values may be requested for any or all
++ * members of the @p HalCh structure by supplying a value of 0xFFFFFFFF for the
++ * given member.  The @p OsSetup parameter is a pointer to an OS defined
++ * data structure.  If the CPHAL later calls @c MallocRxBuffer(), this pointer
++ * is returned in that call.
++ *  
++ * @param   HalDev  CPHAL module instance. (set by xxxInitModule())   
++ * @param   HalCh   Per channel information structure.  Implementation specific.
++ * @param   OsSetup Pointer to an OS-defined data structure.
++ *
++ * @return  EC_NO_ERRORS (ok). <BR>
++ *          Possible Error Codes:<BR>
++ *          @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *          @ref EC_VAL_NULL_CH_STRUCT "EC_VAL_NULL_CH_STRUCT"<BR>
++ *          @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
++ *          @ref EC_VAL_CH_ALREADY_OPEN "EC_VAL_CH_ALREADY_OPEN"<BR>
++ *          @ref EC_VAL_RX_STATE_RAM_NOT_CLEARED "EC_VAL_RX_STATE_RAM_NOT_CLEARED"<BR>
++ *          @ref EC_VAL_TX_STATE_RAM_NOT_CLEARED "EC_VAL_TX_STATE_RAM_NOT_CLEARED"<BR>
++ *          @ref EC_VAL_TCB_MALLOC_FAILED "EC_VAL_TCB_MALLOC_FAILED"<BR>
++ *          @ref EC_VAL_RCB_MALLOC_FAILED "EC_VAL_RCB_MALLOC_FAILED"<BR>
++ *          @ref EC_VAL_RX_BUFFER_MALLOC_FAILED "EC_VAL_RX_BUFFER_MALLOC_FAILED"<BR>
++ *          @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
++ */
++static int halChannelSetup(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup)
++  {
++  int Ch, Ret;
++   
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]halChannelSetup(HalDev:%08x, HalCh:%08x, OsSetup:%08x)\n", (bit32u)HalDev,
++                (bit32u)HalCh, (bit32u)OsSetup);
++      osfuncSioFlush();
++     }
++#endif
++
++  /* Verify proper device state */
++  if (HalDev->State < enInitialized)
++    return (EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE);
++
++  /* We require the channel structure to be passed, even if it only contains
++     the channel number */
++  if (HalCh == NULL)
++    {
++     return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_NULL_CH_STRUCT);
++    }
++
++  Ch = HalCh->Channel;
++
++  if ((Ch < 0) || (Ch > MAX_AAL5_CHAN))
++    {
++     return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_INVALID_CH);
++    }
++
++  /* if channel is already open, this call is invalid */
++  if ((HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) || (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE))
++    {
++     return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
++    }
++
++  /* channel is closed, but might be setup.  If so, reopen the hardware channel. */
++  if ((HalDev->ChIsSetup[Ch][DIRECTION_TX] == FALSE) && (HalDev->ChIsSetup[Ch][DIRECTION_RX] == FALSE))
++    {
++      /* Setup channel configuration */
++      /* Store OS_SETUP */
++      HalDev->ChData[Ch].OsSetup = OsSetup;                                         /* ~GSG 030508 */
++
++      /* setup HAL default values for this channel first */
++      ChannelConfigInit(HalDev, HalCh);
++ 
++      /* retrieve options.conf channel parameters */
++      /* currently ignoring return value, making the choice that it's okay if
++         the user does not supply channel configuration in the data store */
++      ChannelConfigGet(HalDev, HalCh);
++      
++      /* update HalDev with data given in HalCh */  
++      ChannelConfigUpdate(HalDev, HalCh);
++      
++#ifdef __CPHAL_DEBUG
++      if (DBG(8))
++        {
++         dbgChannelConfigDump(HalDev, Ch);
++        }
++#endif
++
++      /* HalDev->ChIsSetup[Ch][0] = TRUE; */
++      HalDev->ChIsSetup[Ch][DIRECTION_TX] = TRUE;
++      HalDev->ChIsSetup[Ch][DIRECTION_RX] = TRUE;
++
++      /* I don't initialize RcbStart or TcbStart here because their values may be
++         reused across several Setup/Teardown calls */
++    }
++
++  /* If the hardware has been opened (is out of reset), then configure the channel
++     in the hardware. NOTE: ChannelConfigApply calls the CPSAR ChannelSetup()! */
++  if (HalDev->State == enOpened)
++    {
++     Ret = ChannelConfigApply(HalDev, HalCh);
++     if (Ret) return (Ret);
++    }
++
++  return (EC_NO_ERRORS);
++  }
++   
++/*
++ *  This function configures the rate at which the OAM timer scheduler
++ *  channels will be scheduled.  The value of OamRate is the number of
++ *  clock ticks between cell transmissions (if OAM function is sourcing
++ *  cells), or the number of clock ticks between events or absence of events
++ *  (if OAM function is sinking cells).  The value of i indicates
++ *  which OAM function to apply the rate to.  A list is given below.
++ *
++ *  @par Oam Function Values
++ *  - 0  : Loopback source
++ *  - 1  : F4 CC source
++ *  - 2  : F5 CC source
++ *  - 3  : F4 CC sink
++ *  - 4  : F5 CC sink
++ *  - 5  : F4 TX AIS source
++ *  - 6  : F5 TX AIS source
++ *  - 7  : F4 RX RDI source
++ *  - 8  : F5 RX RDI source
++ *  - 9  : F4 AIS monitor
++ *  - 10 : F5 AIS monitor
++ *
++ *  The following is information on how to calculate the OAM rate.  There
++ *  is only one OAM timer that is shared among all channels.  Therefore, if
++ *  you wanted an OAM source function (ex. F4 CC source) to generate 1 cell/sec 
++ *  across 8 channels, you would need to configure the OAM timer to schedule 8 
++ *  cells/sec.  In addition, the credits are shared between segment and end-to-end
++ *  type OAM cells, so if you were sending both types of cells, you would
++ *  need to configure the OAM timer for 16 cells/sec.  However, the clock
++ *  rate must be specified in clock ticks between events.  Using an example
++ *  clock rate of 125 MHz, the rate in clock ticks can be calculated by 
++ *  dividing 125 Mhz by 16 cells/sec.  The results is 7812500 ticks.  Thus,
++ *  every 7812500 clock cycles, an OAM cell will be generated for the F4 CC
++ *  Source function.
++ */
++static void OamRateConfig(HAL_DEVICE *HalDev)
++  {
++   int i;
++   bit32u OamRate, Freq = HalDev->SarFrequency;
++
++   /* Configure OAM Timer State Block */
++   for (i=0; i<NUM_OAM_RATES; i++)
++     {
++      switch(i)
++        {
++         case 0:  OamRate = ((Freq/1000)*HalDev->OamLbTimeout); 
++                  break;
++         case 1: 
++         case 2:
++         case 5:
++         case 6: 
++         case 7:
++         case 8:  OamRate = (Freq/38);
++                  break;
++         case 3:
++         case 4:  OamRate = ((Freq*3) + (Freq/2))/38;
++                  break;
++         case 9:
++         case 10: OamRate = ((Freq*2) + (Freq/2))/38;
++                  break;
++         default: OamRate = (Freq*5);
++                  break;
++        }
++  
++      *(pOAM_TIMER_STATE_WORD_0(HalDev->dev_base) + (i*64) + 1) = OamRate;
++     }
++  }
++
++/**
++ *  @ingroup AAL5_Functions
++ *  This function is used to enable OAM functions (other than loopback) for a 
++ *  particular channel.  The channel (embedded within OamConfig - see below) must 
++ *  have been configured for firmware OAM (not host OAM) for these configurations
++ *  to take effect.  More than one function may be enabled at one time. 
++ *  If more than one function is enabled, they must all be of the same level, all
++ *  F4(VP) or all F5(VC).   
++ * 
++ *  The usage of the OamConfig parameter is described through the table below.  To
++ *  initiate firmware OAM, set one or more bits in OamConfig corresponding to the
++ *  various OAM functions.  To disable firmware OAM functions, set bit 30 along 
++ *  with any other combination of bits to shutdown various OAM functions at once.
++ *
++ *  Acronyms:
++ *  e2e - end to end, seg - segment, CC - continuity check, 
++ *  AIS - Alarm Indication Signal
++ *
++ *  @par Bit:   Function:               Description
++ *  - 31:       Reserved:
++ *  - 30:       Setup/Teardown:         0 - enable, 1 - disable (Note 1)
++ *  - 29:       F4  CC  Source seg:     0 - no action, 1 - configure 
++ *  - 28:       F4  CC  Source e2e:     0 - no action, 1 - configure
++ *  - 27:       F4  AIS Source seg:     0 - no action, 1 - configure
++ *  - 26:       F4  AIS Source e2e:     0 - no action, 1 - configure
++ *  - 25:       F5  CC  Source seg:     0 - no action, 1 - configure
++ *  - 24:       F5  CC  Source e2e:     0 - no action, 1 - configure
++ *  - 23:       F5  AIS Source seg:     0 - no action, 1 - configure
++ *  - 22:       F5  AIS Source e2e:     0 - no action, 1 - configure
++ *  - 21:       F4  CC  Sink seg:       0 - no action, 1 - configure
++ *  - 20:       F4  CC  Sink e2e:       0 - no action, 1 - configure
++ *  - 19:       F5  CC  Sink seg:       0 - no action, 1 - configure
++ *  - 18:       F5  CC  Sink e2e:       0 - no action, 1 - configure
++ *  - 17:8:     Reserved:
++ *  - 7:0:      Channel:                AAL5/AAL2 VC/VP channel (Note 2)
++ * 
++ *
++ *  Note 1:  This bit must be clear to enable the specified OAM function.
++ *  Note 2:  This must specify the VC channel for F5 functions, and the VP
++ *           channel for F4 functions.
++ *
++ *  @param HalDev      CPHAL module instance. (set by xxxInitModule())
++ *  @param OamConfig   A 32-bit integer field defined as follows: 
++ */
++static void halOamFuncConfig(HAL_DEVICE *HalDev, unsigned int OamConfig)
++  {
++   /* GPR 0 */
++   SAR_PDSP_HOST_OAM_CONFIG_REG(HalDev->dev_base) = OamConfig;
++  }
++
++/**
++ *  @ingroup AAL5_Functions
++ *  This function is used to enable OAM loopback functions for a particular 
++ *  channel.  The channel (embedded within OamConfig - see below) must have been 
++ *  configured for firmware OAM (not host OAM) for these configurations to take 
++ *  effect.  Only one loopback function can be enabled at a time.  
++ *
++ *  The LLID is inserted into to the OAM cell's LLID field, and it specifies the 
++ *  LLID of the connection point in the network where the generated loopback cell
++ *  should be turned around.  The LLID is composed of 4 32-bit words, and this 
++ *  function expects the caller to pass an array of 4 words in the LLID field.  
++ *  The CorrelationTag is a 32-bit word that the PDSP uses to correlate loopback 
++ *  commands with loopback responses.  It should simply be changed for each 
++ *  call, and there is no restriction on the value used for CorrelationTag.
++ * 
++ *  The usage of the OamConfig parameter is described through the table below.  To
++ *  initiate firmware OAM, set one of the bits corresponding to the
++ *  various loopback OAM functions.  Note that only one loopback source may be 
++ *  commanded at a time.
++ *
++ *  Acronyms:
++ *  e2e - end to end, seg - segment, LB - loopback
++ * 
++ *  @par Bit:   Function:               Description
++ *  - 31:16:    Reserved:
++ *  - 15:       F4  LB Source seg:      0 - no action, 1 - configure (Note 1)
++ *  - 14:       F4  LB Source seg:      0 - no action, 1 - configure (Note 1)
++ *  - 13:       F4  LB Source e2e:      0 - no action, 1 - configure (Note 1)
++ *  - 12:       F4  LB Source e2e:      0 - no action, 1 - configure (Note 1) 
++ *  - 11:8:     Reserved:
++ *  - 7:0:      Channel:                AAL5/AAL2 VC/VP channel (Note 2)
++ * 
++ *
++ *  Note 1:  Only one LB function may be enabled at one time.  Once enabled, 
++ *           the PDSP will time out after 5 seconds.  The host must wait until it 
++ *           has received the result of the current LB request before initiating 
++ *           a new request. <BR>
++ *  Note 2:  This must specify the VC channel for F5 functions, and the VP
++ *           channel for F4 functions.
++ *
++ *  @param HalDev      CPHAL module instance. (set by xxxInitModule())
++ *  @param OamConfig   A 32-bit integer field defined as follows: 
++ *  @param LLID        Loopback Location Identifier (passed as 4 word array).
++ *                     Must be configured in big endian format.
++ *  @param CorrelationTag 32-bit tag correlates loopback commands with loopback 
++ *                        responses.  Must be configured in big endian format.
++ *
++ */
++static void halOamLoopbackConfig(HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag)
++  {
++   volatile bit32u *tmp;
++
++   /* test to see if this is a loopback command */
++   if (OamConfig & 0xf000)
++     {
++      /* write the OAM correlation tag (GPR 1) */
++      SAR_PDSP_OAM_CORR_REG(HalDev->dev_base) = CorrelationTag;
++
++      /* write the LLID */
++      tmp = pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base);
++
++      /* advance past the CPID */
++      tmp += 4;
++
++      *tmp++ = LLID[0];
++      *tmp++ = LLID[1];
++      *tmp++ = LLID[2];
++      *tmp   = LLID[3];
++
++      /* GPR 0 */
++      SAR_PDSP_HOST_OAM_CONFIG_REG(HalDev->dev_base) = OamConfig;
++     }
++  }
++
++/*
++ *  This function allows the host software to access any register directly.
++ *  Primarily used for debug.
++ *  
++ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())  
++ *  @param   RegOffset   Hexadecimal offset to desired register (from device base addr)
++ *
++ *  @return  Volatile pointer to desired register.
++ */
++static volatile bit32u* halRegAccess(HAL_DEVICE *HalDev, bit32u RegOffset)
++  {
++   /* compute the register address */
++   return ((volatile bit32u *)(HalDev->dev_base + RegOffset)); 
++  }
++
++#ifdef __CPHAL_DEBUG
++static void dbgConfigDump(HAL_DEVICE *HalDev)
++  {
++   dbgPrintf("  AAL5 Inst %d Config Dump:\n", HalDev->Inst);
++   dbgPrintf("    Base     :%08x, offset:%08d\n", 
++             HalDev->dev_base, HalDev->offset);
++   dbgPrintf("    Interrupt:%08d, debug :%08d\n", 
++             HalDev->interrupt, HalDev->debug);
++   osfuncSioFlush();
++  }
++#endif
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  Performs a variety of control functions on the CPHAL module.  It is used to
++ *  modify/read configuration parameters and to initiate internal functions.
++ *  The @p Key indicates the function to perform or the parameter to access (note 
++ *  that these Keys are identical to those used in accessing the configuration data
++ *  store).  @p Action is applicable to parameters only, and indicates what the
++ *  CPHAL should do with the parameter (i.e. "Set", "Get", etc..).  The actions
++ *  for each parameter are defined in the module specific documentation.
++ *  
++ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())
++ *  @param   Key         Key specifying the parameter to change or internal function to initiate.  See module specific documentation for available keys.
++ *  @param   Action      Specifies the action to take.  See module specific documentation for available actions.
++ *  @param   Value       Pointer to new value for given @p Key parameter ("Set"), or returned value of Key ("Get").
++ *  
++ *  @return  EC_NO_ERRORS (ok).<BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           @ref EC_VAL_KEY_NOT_FOUND "EC_VAL_KEY_NOT_FOUND"<BR>
++ *           @ref EC_VAL_ACTION_NOT_FOUND "EC_VAL_ACTION_NOT_FOUND"<BR>     
++ */
++static int halControl(HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value)
++  {
++   int Level, Ch, KeyFound=0, ActionFound=0, rc=EC_NO_ERRORS, Queue;
++   char *TmpKey = (char *)Key;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]halControl(HalDev:%08x, Key:%s, Action:%s, Value:%08x)\n", (bit32u)HalDev,
++                Key, Action, (bit32u)Value);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Verify proper device state */
++   if (HalDev->State < enInitialized)
++     return (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_STATE);   
++
++   if (HalDev->OsFunc->Strcmpi(Key, "Debug") == 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         HalDev->debug = *(int *)Value;
++         /* also setup debug variable in CPSAR module */
++         rc = HalDev->SarFunc->Control(HalDev->SarDev, "Debug", "Set", Value);
++        }
++     }
++
++   if (HalDev->OsFunc->Strstr(Key, "FwdUnkVc.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++  
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("FwdUnkVc.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         HalDev->ChData[Ch].FwdUnkVc = *(int *)Value;
++
++         if ((HalDev->State == enOpened) && (HalDev->ChData[Ch].PktType == 3))
++           rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);         
++        }
++     }
++
++   /* +GSG 030407 */
++   if (HalDev->OsFunc->Strcmpi(Key, "OamMode") == 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);         
++        }
++
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++         rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);
++        }
++     }
++
++   /* +GSG 030307 */
++   if (HalDev->OsFunc->Strcmpi(Key, "Version") == 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++         *(const char **)Value = pszVersion_CPAAL5;
++        }
++     }
++
++   /* +GSG 030529 */
++   if (HalDev->OsFunc->Strcmpi(Key, "TurboDslErrors") == 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++         *(int *)Value = HalDev->TurboDslErrors;
++        }
++     }
++   
++   /* +GSG 030416 */
++   if (HalDev->OsFunc->Strcmpi(Key, "F4_LB_Counter") == 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++         *(int *)Value = SAR_PDSP_OAM_F4_LB_COUNT_REG(HalDev->dev_base);
++        }
++     }
++
++   /* +GSG 030416 */
++   if (HalDev->OsFunc->Strcmpi(Key, "F5_LB_Counter") == 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++         *(int *)Value = SAR_PDSP_OAM_F5_LB_COUNT_REG(HalDev->dev_base);
++        }
++     }
++   
++   if (HalDev->OsFunc->Strstr(Key, "Stats;") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++         TmpKey += HalDev->OsFunc->Strlen("Stats;");
++         Level = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++         TmpKey++;
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++         TmpKey++;
++         Queue = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++         TmpKey++;
++         StatsGet(HalDev, (void **)Value, Level, Ch, Queue);
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #100 */
++   if (HalDev->OsFunc->Strstr(Key, "Gfc.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("Gfc.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].Gfc = *(int *)Value;
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #100 */
++   if (HalDev->OsFunc->Strstr(Key, "Clp.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("Clp.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].Clp = *(int *)Value;
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #100 */
++   if (HalDev->OsFunc->Strstr(Key, "Pti.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("Pti.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].Pti = *(int *)Value;
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #100 */
++   if (HalDev->OsFunc->Strstr(Key, "CpcsUU.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("CpcsUU.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].CpcsUU = *(int *)Value;
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #100 */
++   if (HalDev->OsFunc->Strstr(Key, "TxVc_CellRate.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("TxVc_CellRate.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].TxVc_CellRate = *(int *)Value;
++
++         /* now, apply to PDSP state RAM */
++         if (HalDev->State == enOpened)
++           *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))= HalDev->ChData[Ch].TxVc_CellRate;
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #100 */
++   if (HalDev->OsFunc->Strstr(Key, "TxVc_Mbs.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("TxVc_Mbs.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].TxVc_Mbs = *(int *)Value;
++
++         /* now, apply to PDSP state RAM */
++         if (HalDev->State == enOpened)
++           *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)= HalDev->ChData[Ch].TxVc_Mbs;
++        }
++     }
++
++   if (HalDev->OsFunc->Strstr(Key, "TxVc_AtmHeader.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("TxVc_AtmHeader.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].TxVc_AtmHeader = *(int *)Value;
++
++         /* now, apply to PDSP state RAM */
++         if (HalDev->State == enOpened)
++           *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+6)= HalDev->ChData[Ch].TxVc_AtmHeader;
++        }
++     }
++
++   if (HalDev->OsFunc->Strstr(Key, "TxVp_AtmHeader.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("TxVp_AtmHeader.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].TxVp_AtmHeader = *(int *)Value;
++
++         /* now, apply to PDSP state RAM */
++         if (HalDev->State == enOpened)
++           *(pPDSP_AAL5_TX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64))= HalDev->ChData[Ch].TxVp_AtmHeader;
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #100 */
++   if (HalDev->OsFunc->Strstr(Key, "TxVc_Pcr.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("TxVc_Pcr.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].TxVc_Pcr = *(int *)Value;
++
++         /* now, apply to PDSP state RAM */
++         if (HalDev->State == enOpened)
++           *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+4)= HalDev->ChData[Ch].TxVc_Pcr;
++        }
++     }
++
++   /* +GSG 030428 */
++   if (HalDev->OsFunc->Strstr(Key, "RxVc_OamCh.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVc_OamCh.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].RxVc_OamCh = (*(int *)Value) & 0xff;
++
++         /* now, apply to PDSP state RAM */
++         if (HalDev->State == enOpened)
++           *(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)) |= HalDev->ChData[Ch].RxVc_OamCh;
++        }
++     }
++
++   /* +GSG 030428 */
++   if (HalDev->OsFunc->Strstr(Key, "RxVp_OamCh.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVp_OamCh.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* first, store new value in our channel structure */
++         HalDev->ChData[Ch].RxVp_OamCh = (*(int *)Value) & 0xff;
++
++         /* now, apply to PDSP state RAM */
++         if (HalDev->State == enOpened)
++           *(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1) |= HalDev->ChData[Ch].RxVp_OamCh;
++        }
++     }
++
++   /* +GSG 030304 */
++   /* Fixes PITS #98 */
++   if (HalDev->OsFunc->Strstr(Key, "PdspEnable") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         
++         /* this variable is controlled by the CPSAR module */
++         if (HalDev->State == enOpened)
++           {
++            rc=HalDev->SarFunc->Control(HalDev->SarDev, "PdspEnable", "Set", Value);
++           }
++        }
++     }
++
++   if (HalDev->OsFunc->Strstr(Key, "OamLbTimeout") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         
++         HalDev->OamLbTimeout = *(int *)Value;
++         /* this variable is controlled by the CPSAR module */
++         if (HalDev->State == enOpened)
++           {
++            *(pOAM_TIMER_STATE_WORD_0(HalDev->dev_base) + 1) = 
++              ((HalDev->SarFrequency/1000) * HalDev->OamLbTimeout);
++           }
++        }
++     }
++
++   /* +GSG 030306 (PITS #114) */
++   if (HalDev->OsFunc->Strstr(Key, "DeviceCPID") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         unsigned int* local = (unsigned int *)Value;
++         ActionFound=1;
++         /* first, store new value in our hal structure */
++         HalDev->DeviceCPID[0] = local[0];
++         HalDev->DeviceCPID[1] = local[1];
++         HalDev->DeviceCPID[2] = local[2];
++         HalDev->DeviceCPID[3] = local[3];
++
++         /* now, apply to PDSP state RAM */
++         if (HalDev->State == enOpened)
++           {
++            *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 0) = HalDev->DeviceCPID[0];
++            *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 1) = HalDev->DeviceCPID[1];
++            *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 2) = HalDev->DeviceCPID[2];
++            *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 3) = HalDev->DeviceCPID[3];
++           }
++        }
++     }
++
++   /* +GSG 030304 */
++   /* Fixes PITS #99 */
++   if (HalDev->OsFunc->Strstr(Key, "StrictPriority") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++        
++         /* used in halOpen to decide which interrupt handler to use */
++         HalDev->StrictPriority = *(int *)Value;
++        }
++     }
++
++   if (HalDev->OsFunc->Strstr(Key, hcMaxFrags) != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++        
++         if ((*(int *)Value) > 0)
++           HalDev->MaxFrags = *(int *)Value;
++          else
++           rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_VALUE);
++        }
++
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++
++         *(int *)Value = HalDev->MaxFrags;
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #103 */
++   if (HalDev->OsFunc->Strstr(Key, "RxVc_RDICount.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++        
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVc_RDICount.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* PDSP's Rx VC State word 3 contains the value */
++         if (HalDev->State == enOpened)
++           {
++            *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))) & RDI_CNT_MASK)>>RDI_CNT_SHIFT);
++           }
++        }
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++        
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVc_RDICount.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* All sets write 0, this action is a clear only */
++         if (HalDev->State == enOpened)
++           {
++            (*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))) &=~ RDI_CNT_MASK;
++           }
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #103 */
++   if (HalDev->OsFunc->Strstr(Key, "RxVc_AISseg.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++        
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVc_AISseg.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* PDSP's Rx VC State word 3 contains the value */
++         if (HalDev->State == enOpened)
++           {
++            *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+3)) & AIS_SEG_MASK)>>AIS_SEG_SHIFT);
++           }
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #103 */
++   if (HalDev->OsFunc->Strstr(Key, "RxVc_AISetoe.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++        
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVc_AISetoe.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* PDSP's Rx VC State word 3 contains the value */
++         if (HalDev->State == enOpened)
++           {
++            *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+3)) & AIS_ETOE_MASK)>>AIS_ETOE_SHIFT);
++           }
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #103 */
++   if (HalDev->OsFunc->Strstr(Key, "RxVp_RDICount.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++        
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVp_RDICount.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* PDSP's Rx VC State word 3 contains the value */
++         if (HalDev->State == enOpened)
++           {
++            *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1)) & RDI_CNT_MASK)>>RDI_CNT_SHIFT);
++           }
++        }
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++        
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVp_RDICount.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* All sets write 0, this action is a clear only */
++         if (HalDev->State == enOpened)
++           {
++            (*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1)) &=~ RDI_CNT_MASK;
++           }
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #103 */
++   if (HalDev->OsFunc->Strstr(Key, "RxVp_AISseg.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++        
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVp_AISseg.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* PDSP's Rx VC State word 3 contains the value */
++         if (HalDev->State == enOpened)
++           {
++            *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)) & AIS_SEG_MASK)>>AIS_SEG_SHIFT);
++           }
++        }
++     }
++
++   /* +GSG 030306 */
++   /* Fixes PITS #103 */
++   if (HalDev->OsFunc->Strstr(Key, "RxVp_AISetoe.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++        
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("RxVp_AISetoe.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* PDSP's Rx VC State word 3 contains the value */
++         if (HalDev->State == enOpened)
++           {
++            *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)) & AIS_ETOE_MASK)>>AIS_ETOE_SHIFT);
++           }
++        }
++     }
++
++   if (KeyFound == 0)
++     rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND);
++
++   if (ActionFound == 0)
++     rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND);
++
++   return(rc);    
++  }
++
++/*
++ * Sets up HAL default configuration parameter values.
++ */
++static void ConfigInit(HAL_DEVICE *HalDev)
++  {
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]ConfigInit(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* configure some defaults with tnetx7300 values */
++   HalDev->dev_base = 0xa3000000;
++   HalDev->offset = 0;
++   HalDev->interrupt = 15;
++   HalDev->debug = 0;
++   HalDev->MaxFrags = 46;
++   HalDev->OamLbTimeout = 5000;
++  }
++
++/*
++ * Retrieve HAL configuration parameter values.
++ */
++static bit32u ConfigGet(HAL_DEVICE *HalDev)
++  {
++   bit32u Ret;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]ConfigGet(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* get the configuration parameters common to all modules */
++   Ret = ConfigGetCommon(HalDev);
++   if (Ret) return (EC_AAL5|Ret);
++
++   /* get AAL5 specific configuration parameters here */
++   Ret = HalDev->OsFunc->Control(HalDev->OsDev, hcSarFrequency, pszGET, &HalDev->SarFrequency); /* GSG +030416*/
++   if (Ret)                                                                                /* GSG +030416*/
++     HalDev->SarFrequency = 200000000;  /* 200 Mhz default */                              /* GSG +030416*/
++
++   return (EC_NO_ERRORS);
++  }
++
++/** 
++ *  @ingroup CPHAL_Functions
++ *  This function initializes the CPHAL module. It gathers all
++ *  necessary global configuration info from the configuration file, and
++ *  performs initialization and configuration of the device.  Note that
++ *  the device operation is not started until the OS calls @c Open().
++ *
++ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return  EC_NO_ERRORS (ok). <BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           @ref EC_VAL_BASE_ADDR_NOT_FOUND "EC_VAL_BASE_ADDR_NOT_FOUND"<BR>
++ *           @ref EC_VAL_RESET_BIT_NOT_FOUND "EC_VAL_RESET_BIT_NOT_FOUND"<BR>
++ *           @ref EC_VAL_INTERRUPT_NOT_FOUND "EC_VAL_INTERRUPT_NOT_FOUND"<BR>
++ *           @ref EC_VAL_OFFSET_NOT_FOUND "EC_VAL_OFFSET_NOT_FOUND"<BR>
++ */
++static int halInit(HAL_DEVICE *HalDev)
++  {
++  int i;
++  bit32u error_code;
++
++#ifdef __CPHAL_DEBUG
++  if (DBG(0))
++    {
++     dbgPrintf("[aal5]halInit(HalDev:%08x)\n", (bit32u)HalDev);
++     osfuncSioFlush();
++    }
++#endif
++
++  /* Verify proper device state */
++  if (HalDev->State != enDevFound)
++    return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_INVALID_STATE);
++
++  /* Configure HAL defaults */
++  ConfigInit(HalDev);
++
++  /* Retrieve HAL configuration parameters from data store */
++  error_code = ConfigGet(HalDev);
++  if (error_code) return (error_code);
++ 
++  /* Other items (OAM related) that need to be passed in somehow */
++  HalDev->DeviceCPID[0] = 0xffffffff;
++  HalDev->DeviceCPID[1] = 0xffffffff;
++  HalDev->DeviceCPID[2] = 0xffffffff;
++  HalDev->DeviceCPID[3] = 0xffffffff;
++  HalDev->LBSourceLLID[0] = 0xffffffff;
++  HalDev->LBSourceLLID[1] = 0xffffffff;
++  HalDev->LBSourceLLID[2] = 0xffffffff;
++  HalDev->LBSourceLLID[3] = 0xffffffff;
++
++  /* Initialize SAR layer*/
++  error_code = HalDev->SarFunc->Init(HalDev->SarDev);
++  if (error_code) return (error_code);
++
++  /* Initialize various HalDev members.  This is probably overkill, since these
++     are initialized in ChannelSetup() and HalDev is cleared in InitModule(). */
++  for (i=0; i<NUM_AAL5_CHAN; i++)
++    { 
++     HalDev->InRxInt[i]=FALSE;
++     HalDev->ChIsOpen[i][DIRECTION_TX] = FALSE;
++     HalDev->ChIsOpen[i][DIRECTION_RX] = FALSE;
++     HalDev->TcbStart[i][0] = 0;
++     HalDev->TcbStart[i][1] = 0;
++     HalDev->RcbStart[i]  = 0;
++    }
++
++  /* initialize SAR stats */
++  StatsClear(HalDev);
++
++  /* init Stat pointers */
++ 
++  /* even though these statistics may be for multiple channels/queues, i need 
++     only configure the pointer to the beginning of the array, and I can index 
++     from there if necessary */
++  StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
++  StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
++  StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
++  StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
++
++  StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
++  StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
++  StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
++  StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
++  StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
++  StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
++  StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
++  StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
++  StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
++  StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
++  StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
++
++  StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
++  StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
++  StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
++  StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
++  StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
++  StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
++  StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
++  StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
++  StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
++  StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
++  StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
++  StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
++  StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
++  StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
++
++  StatsTable4[0].StatPtr  = &HalDev->dev_base;
++  StatsTable4[1].StatPtr  = &HalDev->offset;
++  StatsTable4[2].StatPtr  = &HalDev->interrupt;
++  StatsTable4[3].StatPtr  = &HalDev->debug;
++  StatsTable4[4].StatPtr  = &HalDev->Inst;
++ 
++  StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
++  StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
++  StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
++  StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
++  StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
++  StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
++  StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
++  StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
++  StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
++  StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
++  StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
++  StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
++  StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
++  StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
++  StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
++  StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
++  StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
++  StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
++  StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
++  StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
++
++  /* update device state */
++  HalDev->State = enInitialized;
++
++#ifdef __CPHAL_DEBUG
++  if (DBG(9))
++    dbgConfigDump(HalDev);
++#endif
++
++  return(EC_NO_ERRORS);
++  }
++
++/*
++ *  Use this function to actually send after queuing multiple packets using 
++ *  Send().  This is a debug only function that should be removed - it was 
++ *  necessary to properly implement my loopback tests. 
++ *
++ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule()) 
++ *  @param   Queue       Queue number to kick. 
++ *
++ *  @return  0 OK, Non-Zero Not OK
++ */
++static int halKick(HAL_DEVICE *HalDev, int Queue)
++  {
++   int Ch;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]halKick(HalDev:%08x. Queue:%d)\n", (bit32u)HalDev, Queue);
++      osfuncSioFlush();
++     }
++#endif
++
++   for (Ch = 0; Ch < 16; Ch ++)
++     {
++      if ((!HalDev->TxActive[Ch][Queue]) && (HalDev->TxActQueueHead[Ch][Queue] != 0))
++        {
++         *(pTX_DMA_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+Queue)=
++           VirtToPhys(HalDev->TxActQueueHead[Ch][Queue]);
++         HalDev->TxActive[Ch][Queue]=TRUE;
++        }
++     } 
++ 
++   return (EC_NO_ERRORS);   
++  }
++
++/*  +GSG 030305  For PITS #99
++ *  Alternate interrupt handler that uses the INT_VECTOR in order to 
++ *  provide strict priority handling among channels, beginning with Ch 0.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
++ *  @param   MoreWork (Output) When set to 1, indicates that there is more work to do.
++ *                    Caller should ensure that the value pointed at is set to 0
++ *                    prior to the call.
++ *  @return  0 OK, non-zero error.
++ */
++static int DeviceIntAlt(HAL_DEVICE *HalDev, int *MoreWork)
++  {
++   int tmp, Ch, WorkFlag;
++   bit32u rc;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]DeviceIntAlt(HalDev:%08x, MoreWork:%08x)\n", (bit32u)HalDev, (bit32u)MoreWork);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Verify proper device state - important because a call prior to Open would
++      result in a lockup */
++   if (HalDev->State != enOpened)
++     return(EC_AAL5|EC_FUNC_DEVICE_INT_ALT|EC_VAL_INVALID_STATE);
++
++   if ((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING)
++     {
++       /*printf("\015 %d RxQ",HalDev->RxActQueueCount[0]);
++         HalDev->OsFunc->Control(HalDev->OsDev, enSIO_FLUSH, enNULL, 0); */
++
++      if (tmp&TXH_PEND) 
++        {
++         /* decide which channel to service */
++         Ch = (SAR_INTR_VECTOR(HalDev->dev_base) & TXH_PEND_INVEC);
++
++         rc = TxInt(HalDev,Ch,0,&WorkFlag);
++         if (rc) return (rc);
++
++         if (WorkFlag == 1)
++           *MoreWork = 1;
++        }
++
++      if (tmp&TXL_PEND) 
++        {
++         /* decide which channel to service */
++         Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & TXL_PEND_INVEC) >> 4);
++
++         rc = TxInt(HalDev,Ch,1,&WorkFlag);
++         if (rc) return (rc);
++
++         if (WorkFlag == 1)
++           *MoreWork = 1;
++        }
++
++      if (tmp&RX_PEND)
++        {
++         /* decide which channel to service */
++         Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & RX_PEND_INVEC) >> 8);
++
++         rc = RxInt(HalDev,Ch,&WorkFlag);
++         if (rc) return (rc);
++
++         if (WorkFlag == 1)
++           *MoreWork = 1;
++        }
++       
++      if (tmp&STS_PEND)
++        {
++         /* GPR 2 code added for PITS 103 */
++         /* determine interrupt source */
++         Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & STS_PEND_INVEC) >> 12);
++
++         /* only if this is GPR 2 interrupt do we take action */
++         if (Ch == 26)
++           {
++            /* pass loopback result back to OS */
++            HalDev->OsFunc->Control(HalDev->OsDev, "OamLbResult", "Set",
++              (bit32u *)pSAR_PDSP_OAM_LB_RESULT_REG(HalDev->dev_base)); 
++           }
++
++         /* clear the interrupt */
++         SAR_STATUS_CLR_REG(HalDev->dev_base) |= 0x04000000;
++        }
++
++      if (tmp&AAL2_PEND)
++        { 
++          /* no action defined */
++        }
++    
++      SAR_INTR_VECTOR(HalDev->dev_base) = 0;
++     }
++
++   return (EC_NO_ERRORS);
++  }
++
++/*
++ *  Called to service a module interrupt.  This function determines
++ *  what type of interrupt occurred and dispatches the correct handler.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
++ *  @param   MoreWork (Output) When set to 1, indicates that there is more work to do.
++ *                    Caller should ensure that the value pointed at is set to 0
++ *                    prior to the call.
++ *  @return  0 OK, non-zero error.
++ */
++static int DeviceInt(HAL_DEVICE *HalDev, int *MoreWork)
++  {
++    /*static int NextRxCh=0;
++      static int NextTxCh[2]={0,0};*/
++
++   int tmp, Ch, FirstCh, WorkFlag;
++   int NextTxLCh, NextTxHCh, NextRxCh;
++   bit32u rc;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]DeviceInt(HalDev:%08x, MoreWork:%08x)\n", (bit32u)HalDev, (bit32u)MoreWork);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Verify proper device state - important because a call prior to Open would
++      result in a lockup */
++   if (HalDev->State != enOpened)
++     return(EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_INVALID_STATE);
++
++   NextTxHCh = HalDev->NextTxCh[0];
++   NextTxLCh = HalDev->NextTxCh[1];
++   NextRxCh =  HalDev->NextRxCh;
++
++   /* service interrupts while there is more work to do */
++   /*while (((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING) && (TotalPkts < 500))*/
++   if ((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING)
++     {
++       /*printf("\015 %d RxQ",HalDev->RxActQueueCount[0]);
++         HalDev->OsFunc->Control(HalDev->OsDev, enSIO_FLUSH, enNULL, 0); */
++
++      if (tmp&TXH_PEND) 
++        {
++         /* decide which channel to service */
++         FirstCh = NextTxHCh;
++         while (1)
++           {
++            Ch = NextTxHCh++;
++            if (NextTxHCh == 16)
++              NextTxHCh = 0;
++            if (SAR_TX_MASKED_STATUS(HalDev->dev_base) & (1<<Ch))
++              break;
++            if (FirstCh == NextTxHCh)
++              {
++               /* we checked every channel and still haven't found anything to do */
++               return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_TXH_WORK_TO_DO);
++              }
++           }
++ 
++         rc = TxInt(HalDev,Ch,0,&WorkFlag);
++         if (rc) return (rc);
++
++         if (WorkFlag == 1)
++           *MoreWork = 1;
++        }
++
++      if (tmp&TXL_PEND)
++        {
++         /* decide which channel to service */
++         FirstCh = NextTxLCh;
++         while (1)
++           {
++            Ch = NextTxLCh++;
++            if (NextTxLCh == 16)
++              NextTxLCh = 0;
++            if (SAR_TX_MASKED_STATUS(HalDev->dev_base) & (1<<(Ch+16)))
++              break;
++            if (FirstCh == NextTxLCh)
++              {
++               /* we checked every channel and still haven't found anything to do */
++               return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_TXL_WORK_TO_DO);
++              }
++           }
++
++         rc = TxInt(HalDev,Ch,1,&WorkFlag);
++         if (rc) return (rc);
++
++         if (WorkFlag == 1)
++           *MoreWork = 1;       
++        }
++         
++      if (tmp&RX_PEND)
++        {
++         FirstCh = NextRxCh;
++         while (1)
++           {
++            Ch = NextRxCh++;   
++            if (NextRxCh == 16)
++              NextRxCh = 0;
++            if (SAR_RX_MASKED_STATUS(HalDev->dev_base) & (1 << Ch))
++              break;  /* found a channel to service */
++            if (FirstCh == NextRxCh)
++              {
++               /* we checked every channel and still haven't found anything to do */
++               return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_RX_WORK_TO_DO);
++              }
++           }
++
++         rc = RxInt(HalDev,Ch, &WorkFlag);
++         if (rc) return (rc);
++
++         if (WorkFlag == 1)
++           *MoreWork = 1;
++        }
++       
++      if (tmp&STS_PEND)
++        {
++         /* +GSG 030305 */
++         /* GPR 2 code added for PITS 103 */
++         /* determine interrupt source */
++         Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & STS_PEND_INVEC) >> 12);
++
++         /* only if this is GPR 2 interrupt do we take action */
++         if (Ch == 26)
++           {
++            /* pass loopback result back to OS */
++            HalDev->OsFunc->Control(HalDev->OsDev, "OamLbResult", "Set",
++              (bit32u *)pSAR_PDSP_OAM_LB_RESULT_REG(HalDev->dev_base)); 
++           }
++
++         /* clear the interrupt */
++         SAR_STATUS_CLR_REG(HalDev->dev_base) |= 0x04000000;
++        }
++
++      if (tmp&AAL2_PEND)
++        { 
++          /* no action defined */
++        }
++    
++      SAR_INTR_VECTOR(HalDev->dev_base) = 0;
++     }
++
++   HalDev->NextTxCh[0] = NextTxHCh;
++   HalDev->NextTxCh[1] = NextTxLCh;
++   HalDev->NextRxCh = NextRxCh;
++
++   /* This must be done by the upper layer */
++   /* SAR_EOI(HalDev->dev_base) = 0; */
++
++   return (EC_NO_ERRORS);
++  }
++
++/** 
++ *  @ingroup CPHAL_Functions
++ *  This function starts the operation of the CPHAL device.  It takes the device
++ *  out of reset, and calls @c IsrRegister().  This function should be called after 
++ *  calling the @c Init() function.
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return EC_NO_ERRORS (ok).<BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           @ref EC_VAL_KEY_NOT_FOUND "EC_VAL_KEY_NOT_FOUND"<BR>
++ *           @ref EC_VAL_FIRMWARE_TOO_LARGE "EC_VAL_FIRMWARE_TOO_LARGE"<BR>
++ *           @ref EC_VAL_PDSP_LOAD_FAIL "EC_VAL_PDSP_LOAD_FAIL"<BR>
++ *           @ref EC_VAL_RX_STATE_RAM_NOT_CLEARED "EC_VAL_RX_STATE_RAM_NOT_CLEARED"<BR>
++ *           @ref EC_VAL_TX_STATE_RAM_NOT_CLEARED "EC_VAL_TX_STATE_RAM_NOT_CLEARED"<BR>
++ *           @ref EC_VAL_TCB_MALLOC_FAILED "EC_VAL_TCB_MALLOC_FAILED"<BR>
++ *           @ref EC_VAL_RCB_MALLOC_FAILED "EC_VAL_RCB_MALLOC_FAILED"<BR>
++ *           @ref EC_VAL_RX_BUFFER_MALLOC_FAILED "EC_VAL_RX_BUFFER_MALLOC_FAILED"<BR>
++ *           @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
++ */
++static int halOpen(HAL_DEVICE *HalDev)
++  {
++   int i,Ret;
++   bit32 SarBase = HalDev->dev_base;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]halOpen(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Verify proper device state */
++   if (HalDev->State < enInitialized)
++     return (EC_AAL5|EC_FUNC_OPEN|EC_VAL_INVALID_STATE);
++
++   /* Open the SAR (this brings the whole device out of reset */
++   Ret = HalDev->SarFunc->Open(HalDev->SarDev); /* ~GSG 030410 */
++   if (Ret)                                     /* +GSG 030410 */
++     return (Ret);                              /* +GSG 030410 */
++
++   /* Change device state */
++   HalDev->State = enOpened;
++
++
++#ifdef __CPHAL_DEBUG
++   /* print out the version information */
++   if (DBG(7))
++     {
++      dbgPrintf("[aal5 halOpen()]Module ID(AAL5-CPSAR):%d, Version:%2d.%02d\n",
++                (SAR_ID_REG(SarBase)&0xffff0000)>>16,
++                (SAR_ID_REG(SarBase)&0xff00)>>8,
++                SAR_ID_REG(SarBase)&0xff);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* GREG 11/1/02:  The State RAM clearing code was previously in cpsar.c,
++      directly after device reset.  I moved it here because I believe it is
++      AAL5 specific code.  Also the MAX_CHAN was set to 19 in cpsar.c, which
++      would have caused this code to clear too much memory! */
++
++   /* NOTE:  State RAM must be cleared prior to initializing the PDSP!! */
++
++   /* GSG 030416:  Removed all of this.  All PDSP State RAM is cleared
++      in CPSAR Open().  On Close(), all channels are torndown, thus all
++      AAL5 channel state RAM is cleared.  */
++
++   /* Clear Rx State RAM  */
++   /*for (i=0; i<NUM_AAL5_CHAN; i++)
++     for (j=0; j<NUM_RX_STATE_WORDS; j++)
++     *(pRX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) = 0; */
++
++   /* Check that Rx DMA State RAM was cleared */
++   /*for (i=0; i<NUM_AAL5_CHAN; i++)
++     for (j=0; j<NUM_RX_STATE_WORDS; j++)
++       {
++        if (*(pRX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) != 0)
++         {
++          return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_RX_STATE_RAM_NOT_CLEARED);
++         }
++         }*/
++
++   /* Clear Tx State RAM  */
++   /*for (i=0; i<NUM_AAL5_CHAN; i++)
++     for (j=0; j<NUM_TX_STATE_WORDS; j++)
++       {
++        *(pTX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) = 0; 
++        }*/
++
++   /* Check that Tx DMA State RAM was cleared */
++   /*for (i=0; i<NUM_AAL5_CHAN; i++)
++     for (j=0; j<NUM_TX_STATE_WORDS; j++)
++       {
++        if (*(pTX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) != 0)
++          {
++           return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_TX_STATE_RAM_NOT_CLEARED);
++          }
++          }*/
++
++   /* GSG +030523 Malloc space for the Rx fraglist */
++   HalDev->fraglist = HalDev->OsFunc->Malloc(HalDev->MaxFrags * sizeof(FRAGLIST));
++
++   /* For any channels that have been pre-initialized, set them up now */
++   for (i=0; i<NUM_AAL5_CHAN; i++)
++     {
++      if ((HalDev->ChIsSetup[i][0]==TRUE) && (HalDev->ChIsOpen[i][0]==FALSE))
++        {
++         CHANNEL_INFO HalChn;
++         HalChn.Channel = i;
++         Ret = ChannelConfigApply(HalDev, &HalChn);
++         if (Ret) return (Ret);
++        }
++     }
++
++   /* OAM code would be a candidate to go into ConfigApply */
++
++   /* Configure OAM Timer State Block */
++   OamRateConfig(HalDev); /* +GSG 030416 */
++
++   /* Setup OAM Configuration Block */
++   for (i=0; i<8; i++) /* ~GSG 030603 4->8 */
++     {
++      if (i < 4)
++        *(pOAM_CONFIG_BLOCK_WORD_0(SarBase) + i) = HalDev->DeviceCPID[i];
++      else
++        *(pOAM_CONFIG_BLOCK_WORD_0(SarBase) + i) = HalDev->LBSourceLLID[i-4];
++     }
++
++   /* Setup OAM Padding Block */
++   for (i=0; i<12; i++)
++     {
++      *(pOAM_PADDING_BLOCK_WORD_0(SarBase) + i) = ((i==11)?0x6a6a0000:0x6a6a6a6a);    
++     }
++
++   /* Enable Tx CPPI DMA */
++   TX_CPPI_CTL_REG(HalDev->dev_base) = 1;
++   
++   /* Enable Rx CPPI DMA */
++   RX_CPPI_CTL_REG(HalDev->dev_base) = 1;
++
++   /* +GSG 030306 */
++   /* Fix for PITS 103 */
++   /* Enable Host Interrupt for GPR 2 (OAM LB result register) */
++   SAR_HOST_INT_EN_SET_REG(HalDev->dev_base) |= 0x04000000;
++   
++   /* +GSG 030304 to fix PITS 99 (if block is new)*/
++   if (HalDev->StrictPriority == 1)
++     {
++#ifdef __CPHAL_DEBUG
++      if (DBG(1))
++        {
++         dbgPrintf("[aal5->os]IsrRegister(OsDev:%08x, halIsr:%08x, Interrupt:%d)\n",
++                   (bit32u)HalDev->OsDev, (bit32u)DeviceIntAlt, HalDev->interrupt);
++         osfuncSioFlush();
++        }
++#endif
++
++      /* "register" the interrupt handler */
++      HalDev->OsFunc->IsrRegister(HalDev->OsDev, DeviceIntAlt, HalDev->interrupt);
++     }
++    else /* +GSG 030306 */
++     { /* +GSG 030306 */
++#ifdef __CPHAL_DEBUG
++      if (DBG(1))
++        {
++         dbgPrintf("[aal5->os]IsrRegister(OsDev:%08x, halIsr:%08x, Interrupt:%d)\n",
++                   (bit32u)HalDev->OsDev, (bit32u)DeviceInt, HalDev->interrupt);
++         osfuncSioFlush();
++        }
++#endif
++
++      /* "register" the interrupt handler */
++      HalDev->OsFunc->IsrRegister(HalDev->OsDev, DeviceInt, HalDev->interrupt);
++     } /* +GSG 030306 */
++
++   return(EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  Called to retrigger the interrupt mechanism after packets have been
++ *  processed.  Call this function when the HalISR function indicates that
++ *  there is no more work to do.  Proper use of this function will guarantee 
++ *  that interrupts are never missed.  
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())  
++ *
++ *  @return EC_NO_ERRORS (ok). <BR>
++ */
++static int halPacketProcessEnd(HAL_DEVICE *HalDev)
++  {
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]halPacketProcessEnd(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   SAR_EOI(HalDev->dev_base) = 0;
++   return (EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function probes for the instance of the CPHAL module.  It will call
++ *  the OS function @c DeviceFindInfo() to get the information required.
++ *  
++ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return  EC_NO_ERRORS (ok). <BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           @ref EC_VAL_DEVICE_NOT_FOUND "EC_VAL_DEVICE_NOT_FOUND"<BR>
++ */
++static int halProbe(HAL_DEVICE *HalDev)
++  {
++   int Ret;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]halProbe(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Verify hardware state is "enConnected */
++   if (HalDev->State != enConnected)
++     return (EC_AAL5|EC_FUNC_PROBE|EC_VAL_INVALID_STATE);
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(1))
++     {
++      dbgPrintf("[aal5->os]DeviceFindInfo(Inst:%d, DeviceName:%s, DeviceInfo:%08x)\n",
++                HalDev->Inst, "aal5", (bit32u)&HalDev->DeviceInfo);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Attempt to find the device information */
++   Ret = HalDev->OsFunc->DeviceFindInfo(HalDev->Inst, "aal5", &HalDev->DeviceInfo);
++   if (Ret)
++     return(EC_AAL5|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND);
++
++   /* Call Probe for supporting CPSAR layer */
++   Ret = HalDev->SarFunc->Probe(HalDev->SarDev);
++   if (Ret)
++     return(Ret);
++
++   /* Set device state to DevFound */
++   HalDev->State = enDevFound;
++
++   return(EC_NO_ERRORS);    
++  }
++
++/** 
++ *  @ingroup CPHAL_Functions
++ *  This function shuts down the CPHAL module completely.  The caller must call
++ *  Close() to put the device in reset prior shutting down.  This call will free
++ *  the HalDev and the HAL function pointer structure, effectively ending
++ *  communications between the driver and the CPHAL.  Further use of the module
++ *  must be initiated by a call to xxxInitModule(), which starts the entire process
++ *  over again.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())  
++ *
++ *  @return  EC_NO_ERRORS (ok). <BR>
++ *           Possible Error Codes:<BR>
++ *           Any error code from halClose().<BR>
++ */
++static int halShutdown(HAL_DEVICE *HalDev)
++  {
++   int Ch, Queue;                                                  /*GSG+030514*/
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]halShutdown(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Verify proper device state */
++   if (HalDev->State == enOpened)
++     halClose(HalDev, 3);                                          /*GSG+030429*/
++
++   /* Buffer/descriptor resources may still need to be freed if a Close
++      Mode 1 was performed prior to Shutdown - clean up here */    /*GSG+030514*/
++   for (Ch=0; Ch<NUM_AAL5_CHAN; Ch++)                                
++     {                                                             
++      if (HalDev->RcbStart[Ch] != 0)                           
++        FreeRx(HalDev,Ch);
++
++      for(Queue=0; Queue<MAX_QUEUE; Queue++)
++        {
++         if (HalDev->TcbStart[Ch][Queue] != 0)
++           FreeTx(HalDev,Ch,Queue);
++        }
++     }
++
++   /* shutdown the CPSAR layer */
++   HalDev->SarFunc->Shutdown(HalDev->SarDev);
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(6))
++     {
++      dbgPrintf("  [aal5 halShutdown()]Free AAL5 function pointers\n");
++      osfuncSioFlush();
++     }
++   if (DBG(1)||DBG(3))
++     {
++      dbgPrintf("[aal5->os]Free(MemPtr:%08x)\n", (bit32u)HalDev->HalFuncPtr);
++      osfuncSioFlush();
++     }
++#endif
++   /* free the HalFunc */
++   HalDev->OsFunc->Free(HalDev->HalFuncPtr);
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(6))
++     {
++      dbgPrintf("  [aal5 halShutdown]Free HalDev\n");
++      osfuncSioFlush();
++     }
++   if (DBG(1)||DBG(3))
++     {
++      dbgPrintf("[aal5->os]Free(MemPtr:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++   /* free the HAL device */
++   HalDev->OsFunc->FreeDev(HalDev);
++
++   return(EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  Used to perform regular checks on the device.  This function should be 
++ *  called at a regular interval specified by the @c Tick parameter. 
++ *  
++ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return  EC_NO_ERRORS (ok).<BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ */
++static int halTick(HAL_DEVICE *HalDev)
++  {
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[aal5]halTick(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   if (HalDev->State != enOpened)
++     return(EC_AAL5|EC_FUNC_TICK|EC_VAL_INVALID_STATE);
++
++   return(EC_NO_ERRORS);
++  }
++
++/** 
++ *  @ingroup CPHAL_Functions
++ *
++ *  This function will:
++ *  -# allocate a HalDev that will be used by the OS for future communications with the device
++ *  -# save OsDev for use when calling OS functions
++ *  -# allocate and populate HalFunc with the addresses of CPHAL functions.
++ *  -# check OsFuncSize to see if it meets the minimum requirement.
++ *  -# return the size of the HAL_FUNCTIONS structure through the HalFuncSize pointer.  The OS
++ *     should check this value to ensure that the HAL meets its minimum requirement.
++ *
++ *  Version checking between the OS and the CPHAL is done using the OsFuncSize and 
++ *  HalFuncSize.  Future versions of the CPHAL may add new functions to either
++ *  HAL_FUNCTIONS or OS_FUNCTIONS, but will never remove functionality.  This enables
++ *  both the HAL and OS to check the size of the function structure to ensure that
++ *  the current OS and CPHAL are compatible.
++ *
++ *  Note:  This is the only function exported by a CPHAL module. 
++ *
++ *  Please refer to the section "@ref hal_init" for example code.
++ *
++ *  @param   HalDev  Pointer to pointer to CPHAL module information.  This will 
++ *                   be used by the OS when communicating to this module via 
++ *                   CPHAL. Allocated during the call.
++ *  @param   OsDev   Pointer to OS device information.  This will be saved by
++ *                   the CPHAL and returned to the OS when required.
++ *  @param   HalFunc Pointer to pointer to structure containing function pointers for all CPHAL 
++ *                   interfaces.  Allocated during the call.
++ *  @param   OsFunc  Pointer to structure containing function pointers for all OS
++ *                   provided interfaces.  Must be allocated by OS prior to call.
++ *  @param   OsFuncSize  Size of OS_FUNCTIONS structure.
++ *  @param   HalFuncSize    Pointer to the size of the HAL_FUNCTIONS structure.
++ *  @param   Inst    The instance number of the module to initialize. (start at
++ *                   0).
++ * 
++ *  @return  EC_NO_ERRORS (ok). <BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_OS_VERSION_NOT_SUPPORTED "EC_VAL_OS_VERSION_NOT_SUPPORTED"<BR>
++ *           @ref EC_VAL_MALLOC_DEV_FAILED "EC_VAL_MALLOC_DEV_FAILED"<BR>
++ *           @ref EC_VAL_MALLOC_FAILED "EC_VAL_MALLOC_FAILED"<BR>
++ */
++int xxxInitModule(HAL_DEVICE **HalDev, 
++                 OS_DEVICE *OsDev, 
++                 HAL_FUNCTIONS **HalFunc, 
++                 OS_FUNCTIONS *OsFunc, 
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++
++int cpaal5InitModule(HAL_DEVICE **HalDev, 
++                 OS_DEVICE *OsDev, 
++                 HAL_FUNCTIONS **HalFunc, 
++                 OS_FUNCTIONS *OsFunc, 
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst)
++  {
++   int rc, SarFuncSize;
++   HAL_DEVICE *HalPtr;
++   HAL_FUNCTIONS *HalFuncPtr;
++
++   /* NEW CODE */
++   if (OsFuncSize < sizeof(OS_FUNCTIONS))
++     return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_OS_VERSION_NOT_SUPPORTED);
++
++   HalPtr = (HAL_DEVICE *) OsFunc->MallocDev(sizeof(HAL_DEVICE));
++   if (!HalPtr)
++     return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
++
++   HalFuncPtr = (HAL_FUNCTIONS *) OsFunc->Malloc(sizeof(HAL_FUNCTIONS));
++   if (!HalFuncPtr)
++     return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
++
++   /* Initialize the size of hal functions */
++   *HalFuncSize = sizeof (HAL_FUNCTIONS);
++
++   /* clear the device structure */
++   OsFunc->Memset(HalPtr, 0, sizeof(HAL_DEVICE));
++
++   /* clear the function pointers */
++   OsFunc->Memset(HalFuncPtr, 0, sizeof(HAL_FUNCTIONS));
++
++   /* initialize the HAL_DEVICE structure */
++   HalPtr->OsDev  = OsDev;
++   /*HalPtr->OsOpen = OsDev;*/
++   HalPtr->Inst   = Inst; 
++   HalPtr->OsFunc = OsFunc;
++  
++   /* Supply pointers for the CPHAL API functions */
++   HalFuncPtr->RxReturn        = halRxReturn;
++   HalFuncPtr->Init            = halInit;
++   HalFuncPtr->Close           = halClose;
++   HalFuncPtr->Send            = halSend;
++   HalFuncPtr->ChannelSetup    = halChannelSetup;
++   HalFuncPtr->ChannelTeardown = halChannelTeardown;
++   HalFuncPtr->Open            = halOpen;
++   HalFuncPtr->Kick            = halKick;
++   HalFuncPtr->RegAccess       = halRegAccess; 
++   HalFuncPtr->Probe           = halProbe;
++   HalFuncPtr->Control         = halControl;
++   HalFuncPtr->Tick            = halTick;
++   HalFuncPtr->Shutdown        = halShutdown;
++   HalFuncPtr->OamFuncConfig   = halOamFuncConfig; /* +GSG 030306 */
++   HalFuncPtr->OamLoopbackConfig   = halOamLoopbackConfig; /* ~GSG 030416 */
++
++   /* Temporary */
++   /*HalFuncPtr->StatsGetOld = StatsGet;*/
++   HalFuncPtr->PacketProcessEnd = halPacketProcessEnd;
++
++   /* Now, AAL5 must connect to the CPSAR layer */
++
++   /* Attach to SAR HAL Functions */
++   /*
++   cpsarInitModule(NULL, NULL, 0, NULL, &SarFuncSize, Inst);
++
++   if (SarFuncSize!=sizeof(CPSAR_FUNCTIONS))
++    return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_CPSAR_VERSION_NOT_SUPPORTED); 
++
++   HalPtr->SarFunc = (CPSAR_FUNCTIONS *) OsFunc->Malloc(SarFuncSize);
++   */
++
++   rc = cpsarInitModule(&HalPtr->SarDev, OsDev, &HalPtr->SarFunc, OsFunc, sizeof(OS_FUNCTIONS), &SarFuncSize, Inst);
++
++   /* pass back the error value from the CPSAR layer if necessary */
++   if (rc)
++     return(rc);
++
++   /*
++   if (!HalPtr->SarDev)
++     return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_NULL_CPSAR_DEV);
++   */
++
++   /* Initialize the hardware state */
++   HalPtr->State = enConnected;
++
++   /* keep a reference to HalFuncPtr so I can free it later */
++   HalPtr->HalFuncPtr = HalFuncPtr;
++
++   /* pass the HalPtr back to the caller */
++   *HalDev = HalPtr;
++   *HalFunc = HalFuncPtr;
++
++   return(EC_NO_ERRORS);
++  }
+diff -urN linux.old/drivers/atm/sangam_atm/aal5sar.h linux.dev/drivers/atm/sangam_atm/aal5sar.h
+--- linux.old/drivers/atm/sangam_atm/aal5sar.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/aal5sar.h	2005-08-23 04:46:50.080846280 +0200
+@@ -0,0 +1,198 @@
++/**@file************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE:   aal5sar.h
++ *
++ *  DESCRIPTION:
++ *      This file contains data structure definitions for the AAL5 HAL SAR.
++ *
++ *  HISTORY:
++ *      28Feb02 Greg       1.00  Original Version created.
++ *      06Mar02 Greg       1.01  Documented structures.
++ *      18Jul02 Greg       1.02  Major reorganization
++ *
++ *****************************************************************************/
++#ifndef _INC_AAL5SAR
++#define _INC_AAL5SAR
++
++/** \namespace AAL5_Version
++This documents version 01.06.06 of the AAL5 CPHAL.
++*/
++const char *pszVersion_CPAAL5="CPAAL5 01.06.06 "__DATE__" "__TIME__;
++
++#include "cpsar_cpaal5.h"
++
++#define NUM_AAL5_CHAN   16
++#define MAX_AAL5_CHAN   15
++#define MAX_QUEUE       2
++#define MAX_DIRECTION   2
++
++#define PKT_TYPE_AAL5   0   /* +GSG 030508 */
++#define PKT_TYPE_NULL   1   /* +GSG 030508 */
++#define PKT_TYPE_OAM    2   /* +GSG 030508 */
++#define PKT_TYPE_TRANS  3   /* +GSG 030508 */
++#define ATM_HEADER_SIZE 4   /* +GSG 030508 */
++
++/*
++ * HAL Default Parameter Values
++ */
++#define CFG_TX_NUM_BUFS   {256,256,256,256,256,256,256,256, 256,256,256,256,256,256,256,256}
++#define CFG_RX_NUM_BUFS   {256,256,256,256,256,256,256,256, 256,256,256,256,256,256,256,256}
++#define CFG_RX_BUF_SIZE   {1518,1518,1518,1518,1518,1518,1518,1518, 1518,1518,1518,1518,1518,1518,1518,1518}
++#define CFG_RX_BUF_OFFSET {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_TX_NUM_QUEUES {1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1}
++#define CFG_CPCS_UU       {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_DA_MASK       {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_PRIORITY      {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_PKT_TYPE      {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_VCI           {100,101,102,103,104,105,106,107, 108,109,110,111,112,113,114,115}
++#define CFG_VPI           {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_CELL_RATE     {0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4, 0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4}
++#define CFG_QOS_TYPE      {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_MBS           {8,8,8,8,8,8,8,8, 8,8,8,8,8,8,8,8}
++#define CFG_PCR           {1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1}
++#define CFG_GFC           {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_CLP           {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_PTI           {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
++#define CFG_RX_MAX_SERVICE {170,170,170,170,170,170,170,170, 170,170,170,170,170,170,170,170}
++#define CFG_TX_MAX_SERVICE {170,170,170,170,170,170,170,170, 170,170,170,170,170,170,170,170}
++
++static int cfg_tx_num_bufs[NUM_AAL5_CHAN]   = CFG_TX_NUM_BUFS;
++static int cfg_rx_num_bufs[NUM_AAL5_CHAN]   = CFG_RX_NUM_BUFS;
++static int cfg_rx_buf_size[NUM_AAL5_CHAN]   = CFG_RX_BUF_SIZE;
++static int cfg_rx_buf_offset[NUM_AAL5_CHAN] = CFG_RX_BUF_OFFSET;
++static int cfg_tx_num_queues[NUM_AAL5_CHAN] = CFG_TX_NUM_QUEUES;
++static bit32u cfg_cpcs_uu[NUM_AAL5_CHAN]    = CFG_CPCS_UU;
++static int cfg_da_mask[NUM_AAL5_CHAN]       = CFG_DA_MASK;
++static int cfg_priority[NUM_AAL5_CHAN]      = CFG_PRIORITY;
++static int cfg_pkt_type[NUM_AAL5_CHAN]      = CFG_PKT_TYPE;
++static int cfg_vci[NUM_AAL5_CHAN]           = CFG_VCI;
++static int cfg_vpi[NUM_AAL5_CHAN]           = CFG_VPI;
++static bit32u cfg_cell_rate[NUM_AAL5_CHAN]  = CFG_CELL_RATE;
++static int cfg_qos_type[NUM_AAL5_CHAN]      = CFG_QOS_TYPE;
++static int cfg_mbs[NUM_AAL5_CHAN]           = CFG_MBS;
++static int cfg_pcr[NUM_AAL5_CHAN]           = CFG_PCR;
++static int cfg_gfc[NUM_AAL5_CHAN]           = CFG_GFC;
++static int cfg_clp[NUM_AAL5_CHAN]           = CFG_CLP;
++static int cfg_pti[NUM_AAL5_CHAN]           = CFG_PTI;
++static int cfg_rx_max_service[NUM_AAL5_CHAN]= CFG_RX_MAX_SERVICE;
++static int cfg_tx_max_service[NUM_AAL5_CHAN]= CFG_TX_MAX_SERVICE;
++static char *channel_names[]   = CHANNEL_NAMES;
++
++/*
++ *  The HAL_FUNCTIONS struct defines the function pointers for all HAL functions
++ *  accessible to upper layer software.  It is populated by calling
++ *  halInitModules().
++ *
++ *  Note that this list is still under definition.
++ */
++
++/*
++ *  This is the data structure for a transmit buffer descriptor.  The first
++ *  four 32-bit words of the BD represent the CPPI 3.0 defined buffer descriptor
++ *  words.  The other words are SAR/HAL implementation specific.
++ */
++typedef struct
++  {
++   bit32 HNext;      /**< Hardware's pointer to next buffer descriptor */
++   bit32 BufPtr;     /**< Pointer to the data buffer */
++   bit32 Off_BLen;   /**< Contains buffer offset and buffer length */
++   bit32 mode;       /**< SOP, EOP, Ownership, EOQ, Teardown Complete bits */
++   bit32 AtmHeader;  /**< Atm Header to be used for each fragment */
++   bit32 Word5;      /**< General control information for the packet */
++   bit32 Res6;
++   bit32 Res7;
++   void *Next;
++   void *OsInfo;
++#ifdef __CPHAL_DEBUG
++   bit32 DbgSop;
++   bit32 DbgData;
++   bit32 DbgFraglist;
++#endif
++   void *Eop;
++  }HAL_TCB;
++
++/*
++ *  This is the data structure for a receive buffer descriptor.  The first
++ *  six 32-bit words of the BD represent the CPPI 3.0 defined buffer descriptor
++ *  words.  The other words are HAL implementation specific.
++ */
++typedef volatile struct hal_private
++  {
++  bit32 HNext;      /**< Hardware's pointer to next buffer descriptor */
++  bit32 BufPtr;     /**< Pointer to the data buffer */
++  bit32 Off_BLen;   /**< Contains buffer offset and buffer length */
++  bit32 mode;       /**< SOP, EOP, Ownership, EOQ, Teardown, Q Starv, Length */
++  bit32 AtmHeader;
++  bit32 UuCpi;
++  bit32 Res6;
++  bit32 Res7;
++  void *DatPtr;
++  void *Next;
++  void *OsInfo;
++  void *Eop;
++  bit32 FragCount;
++  bit32 Ch;
++  HAL_DEVICE *HalDev;
++  }HAL_RCB;
++
++
++#define MAX_NEEDS 512                                             /*MJH+030409*/
++/*
++ *  This is the data structure for a generic HAL device.  It contains all device
++ *  specific data for a single instance of that device.  This includes Rx/Tx
++ *  buffer queues, device base address, reset bit, and other information.
++ */
++typedef struct hal_device
++  {
++  HAL_RCB *RcbPool[NUM_AAL5_CHAN];
++  bit32u rxbufseq;
++  bit32 RxActQueueCount[NUM_AAL5_CHAN];
++  HAL_RCB *RxActQueueHead[NUM_AAL5_CHAN];
++  HAL_RCB *RxActQueueTail[NUM_AAL5_CHAN];
++  bit32 RxActive[NUM_AAL5_CHAN];
++  bit32 dev_base;
++  HAL_TCB *TcbPool[NUM_AAL5_CHAN][MAX_QUEUE];
++  bit32 offset;
++  bit32 TxActQueueCount[NUM_AAL5_CHAN][MAX_QUEUE];
++  HAL_TCB *TxActQueueHead[NUM_AAL5_CHAN][MAX_QUEUE];
++  HAL_TCB *TxActQueueTail[NUM_AAL5_CHAN][MAX_QUEUE];
++  bit32 TxActive[NUM_AAL5_CHAN][MAX_QUEUE];
++  bit32 TxTeardownPending[NUM_AAL5_CHAN];
++  bit32 RxTeardownPending[NUM_AAL5_CHAN];
++  bit32 ChIsOpen[NUM_AAL5_CHAN][MAX_DIRECTION];
++  bit32 ChIsSetup[NUM_AAL5_CHAN][MAX_DIRECTION];
++  bit32 interrupt;
++  bit32 debug;
++  OS_DEVICE *OsDev;
++  OS_FUNCTIONS *OsFunc;
++  CPSAR_FUNCTIONS *SarFunc;
++  CPSAR_DEVICE *SarDev;
++  /*void *OsOpen;*/
++    /*FRAGLIST fraglist[MAX_FRAG];*/
++  FRAGLIST *fraglist;
++  char *TcbStart[NUM_AAL5_CHAN][MAX_QUEUE];
++  char *RcbStart[NUM_AAL5_CHAN];
++    /*bit32 RcbSize[NUM_AAL5_CHAN];*/
++  bit32 InRxInt[NUM_AAL5_CHAN];
++  STAT_INFO Stats;
++  bit32  Inst;
++  bit32u DeviceCPID[4];
++  bit32u LBSourceLLID[4];
++  CHANNEL_INFO ChData[NUM_AAL5_CHAN];
++  DEVICE_STATE State;
++  char *DeviceInfo;
++  HAL_FUNCTIONS *HalFuncPtr;
++  int NextRxCh;
++  int NextTxCh[2];
++  int StrictPriority; /* +GSG 030304 */
++  bit32u NeedsCount;                                              /*MJH+030409*/
++  HAL_RECEIVEINFO *Needs[MAX_NEEDS];                              /*MJH+030409*/
++  bit32u SarFrequency;  /* +GSG 030416 */
++  int MaxFrags;
++  bit32u TurboDslErrors;
++  bit32u OamLbTimeout;
++  }HALDEVICE;
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.c linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.c
+--- linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.c	2005-08-23 04:46:50.081846128 +0200
+@@ -0,0 +1,728 @@
++#ifndef _INC_CPCOMMON_C
++#define _INC_CPCOMMON_C
++
++#ifdef _CPHAL_CPMAC
++#include "cpremap_cpmac.c"
++#endif
++
++#ifdef _CPHAL_AAL5
++#include "cpremap_cpaal5.c"
++#endif
++
++#ifdef _CPHAL_CPSAR
++#include "cpremap_cpsar.c"
++#endif
++
++#ifdef _CPHAL_AAL2
++#include "cpremap_cpaal2.c"
++#endif
++
++/**
++@defgroup Common_Config_Params Common Configuration Parameters
++
++This section documents the configuration parameters that are valid across
++all CPHAL devices.
++@{
++*/
++/** This is the debug level.  The field is bit defined, such that the user
++should set to 1 all the bits corresponding to desired debug outputs.  The following 
++are the meanings for each debug bit:
++- bit0 (LSB): CPHAL Function Trace
++- b1 : OS Function call trace
++- b2 : Critical section entry/exit
++- b3 : Memory allocation/destruction
++- b4 : Detailed information in Rx path
++- b5 : Detailed information in Tx path
++- b6 : Extended error information
++- b7 : General info
++*/
++static const char pszDebug[]        = "debug";
++/** CPU Frequency. */
++/*static const char pszCpuFreq[]      = "CpuFreq";*/               /*MJH-030403*/
++/** Base address for the module. */
++static const char pszBase[]         = "base";
++/** Reset bit for the module. */
++static const char pszResetBit[]     = "reset_bit";
++/** Reset base address for the module. */
++static const char pszResetBase[]    = "ResetBase";
++/** Interrupt line for the module. */
++static const char pszIntLine[]      = "int_line";
++/** VLYNQ offset for the module.  Disregard if not using VLYNQ. */
++static const char pszOffset[]       = "offset";
++/** The OS may "Get" this parameter, which is a pointer
++    to a character string that indicates the version of CPHAL. */
++static const char pszVer[]          = "Version";
++/*@}*/
++
++/**
++@defgroup Common_Control_Params Common Keys for [os]Control()
++
++This section documents the keys used with the OS @c Control() interface that
++are required by CPHAL devices.
++
++@{
++*/
++/** Used to wait for an integer number of clock ticks, given as an integer
++    pointer in the @p Value parameter.  No actions are defined. */
++static const char pszSleep[]             = "Sleep";
++/** Requests the OS to flush it's IO buffers.  No actions are defined. */
++static const char pszSioFlush[]          = "SioFlush";
++/*@}*/
++
++static const char pszStateChange[]       = "StateChange";
++static const char pszStatus[]            = "Status";
++
++static const char pszGET[]               = "Get";
++static const char pszSET[]               = "Set";
++static const char pszCLEAR[]             = "Clear";
++static const char pszNULL[]              = "";
++static const char pszLocator[]           = "Locator";
++static const char pszOff[]               = "Off";
++static const char pszOn[]                = "On";
++static const char hcMaxFrags[]           = "MaxFrags";
++
++#ifdef _CPHAL_CPMAC
++
++/*  New method for string constants */
++const char hcClear[]  = "Clear";
++const char hcGet[]    = "Get";
++const char hcSet[]    = "Set";
++
++const char hcTick[]   = "Tick";
++
++static const CONTROL_KEY KeyCommon[] =
++   {
++     {""                   , enCommonStart},
++     {pszStatus            , enStatus},
++     {pszOff               , enOff},
++     {pszOn                , enOn},
++     {pszDebug             , enDebug},
++     {hcCpuFrequency       , enCpuFreq},                           /*MJH~030403*/
++     {""                   , enCommonEnd}
++   };
++#endif
++
++/**
++@defgroup Common_Statistics Statistics
++
++A broad array of module statistics is available.  Statistics values are accessed
++through the @c Control() interface of the CPHAL.  There are 5 different levels
++of statistics, each of which correspond to a unique set of data.  Furthermore,
++certain statistics data is indexed by using a channel number and Tx queue number.
++The following is a brief description of each statistics level, along with the
++indexes used for the level:
++
++- Level 0:  Hardware Statistics (index with channel)
++- Level 1:  CPHAL Software Statistics (channel, queue)
++- Level 2:  CPHAL Flags (channel, queue)
++- Level 3:  CPHAL Channel Configuration (channel)
++- Level 4:  CPHAL General Configuration (no index)
++
++The caller requests statistics information by providing a Key string to the
++@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
++The only valid Action parameter for statistics usage is "Get".
++
++Code Examples:
++@code
++unsigned int *StatsData;
++
++# Get Level 0 stats for Channel 1
++HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
++
++# Get Level 2 stats for Channel 0, Queue 0
++HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
++
++# Get Level 4 stats
++HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
++@endcode
++
++The information returned in the Value parameter of @c Control() is an
++array of pointers to strings.  The pointers are arranged in pairs.
++The first pointer is a pointer to a name string for a particular statistic.
++The next pointer is a pointer to a string containing the representation of
++the integer statistic value corresponding to the first pointer.  This is followed
++by another pair of pointers, and so on, until a NULL pointer is encountered.  The
++following is example code for processing the statistics data.  Note that the OS
++is responsible for freeing the memory passed back through the Value parameter of
++@c Control().
++
++@code
++unsigned int *StatsData;
++
++# Get Level 0 stats for Channel 1
++HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
++
++# output Statistics data
++PrintStats(StatsData);
++
++# the upper layer is responsible for freeing stats info
++free(&StatsPtr);
++
++...
++
++void PrintStats(unsigned int *StatsPtr)
++  {
++   while(*StatsPtr)
++     {
++      printf("%20s:",  (char *)*StatsPtr);
++      StatsPtr++;
++      printf("%11s\n", (char *)*StatsPtr);
++      StatsPtr++;
++     }
++   MySioFlush();
++  }
++@endcode
++
++Within each statistics level, there are several statistics defined.  The statistics that
++are common to every CPPI module are listed below.  In addition, each module may define
++extra statistics in each level, which will be documented within the module-specific
++documentation appendices.
++
++- Level 0 Statistics
++  - All level 0 statistics are module-specific.
++- Level 1 Statistics (CPHAL Software Statistics)
++  - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
++  - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
++transmitting the previous last packet in the queue (per channel and queue).
++  - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
++reception of the previous last packet in the queue (per channel).
++  - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
++  - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
++  - RxPacketsServiced: Number of received packets (per channel).
++  - TxPacketsServiced: Number of transmitted packets (per channel and queue).
++  - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
++  - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
++  - RxTotal: Total number of received packets, all channels.
++  - TxTotal: Total number of transmitted packets, all channels and queues.
++- Level 2 Statistics (CPHAL Flags)
++  - RcbPool: Pointer to receive descriptor pool (per channel).
++  - RxActQueueCount: Number of buffers currently available for receive (per channel).
++  - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
++  - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
++  - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
++  - RcbStart: Pointer to block of receive descriptors.
++  - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
++  - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
++  - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
++  - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
++  - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
++  - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
++  - TcbStart: Pointer to block of transmit descriptors.
++  - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
++- Level 3 Statistics (CPHAL Channel Configuration)
++  - RxBufSize: Rx buffer size.
++  - RxBufferOffset: Rx buffer offset.
++  - RxNumBuffers: Number of Rx buffers.
++  - RxServiceMax: Maximum number of receive packets to service at a time.
++  - TxNumBuffers: Number of Tx buffer descriptors.
++  - TxNumQueues: Number of Tx queues to use.
++  - TxServiceMax: Maximum number of transmit packets to service at a time.
++- Level 4 Statistics (CPHAL General Configuration)
++  - Base Address: Base address of the module.
++  - Offset (VLYNQ): VLYNQ relative module offset.
++  - Interrupt Line: Interrupt number.
++  - Debug: Debug flag, 1 to enable debug.
++  - Inst: Instance number.
++*/
++
++/* 
++   Data Type 0 = int display
++   Data Type 1 = hex display
++   Data Type 2 = channel structure, int display
++   Data Type 3 = queue index and int display
++   Data Type 4 = queue index and hex display
++*/
++#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
++static STATS_TABLE StatsTable0[] =
++  {
++#ifdef _CPHAL_AAL5
++   /* Name ,        Data Ptr,   Data Type */
++   {"Crc Errors",          0,          0},
++   {"Len Errors",          0,          0},
++   {"Abort Errors",        0,          0},
++   {"Starv Errors",        0,          0}
++#endif
++#ifdef _CPHAL_CPMAC
++   {"Rx Good Frames",      0,          0}
++#endif
++  };
++
++static STATS_TABLE StatsTable1[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"DmaLenErrors",        0,          0},
++   {"TxMisQCnt",           0,          3},
++   {"RxMisQCnt",           0,          0},
++   {"TxEOQCnt",            0,          3},
++   {"RxEOQCnt",            0,          0},
++   {"RxPacketsServiced",   0,          0},
++   {"TxPacketsServiced",   0,          3},
++   {"RxMaxServiced",       0,          0},
++   {"TxMaxServiced",       0,          3},
++   {"RxTotal",             0,          0},
++   {"TxTotal",             0,          0},
++  };
++
++static STATS_TABLE StatsTable2[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"RcbPool",             0,          1},
++   {"RxActQueueCount",     0,          0},
++   {"RxActQueueHead",      0,          1},
++   {"RxActQueueTail",      0,          1},
++   {"RxActive",            0,          0},
++   {"RcbStart",            0,          1},
++   {"RxTeardownPending",   0,          0},
++   {"TcbPool",             0,          4},
++   {"TxActQueueCount",     0,          3},
++   {"TxActQueueHead",      0,          4},
++   {"TxActQueueTail",      0,          4},
++   {"TxActive",            0,          3},
++   {"TcbStart",            0,          4},
++   {"TxTeardownPending",   0,          0}
++  };
++
++static STATS_TABLE StatsTable3[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"RxBufSize",           0,          2},
++   {"RxBufferOffset",      0,          2},
++   {"RxNumBuffers",        0,          2},
++   {"RxServiceMax",        0,          2},
++   {"TxNumBuffers",        0,          2},
++   {"TxNumQueues",         0,          2},
++   {"TxServiceMax",        0,          2},
++#ifdef _CPHAL_AAL5
++   {"CpcsUU",              0,          2},
++   {"Gfc",                 0,          2},
++   {"Clp",                 0,          2},
++   {"Pti",                 0,          2},
++   {"DaMask",              0,          2},
++   {"Priority",            0,          2},
++   {"PktType",             0,          2},
++   {"Vci",                 0,          2},
++   {"Vpi",                 0,          2},
++   {"CellRate",            0,          2},
++   {"QosType",             0,          2},
++   {"Mbs",                 0,          2},
++   {"Pcr",                 0,          2}
++#endif
++  };
++
++static STATS_TABLE StatsTable4[] =
++  {
++   {"Base Address",        0,          1},
++   {"Offset (VLYNQ)",      0,          0},
++   {"Interrupt Line",      0,          0},
++   {"Debug",               0,          0},
++   {"Instance",            0,          0},
++#ifdef _CPHAL_AAL5
++   {"UniNni",              0,          0}
++#endif
++  };
++
++static STATS_DB StatsDb[] =
++  {
++    {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
++    {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
++    {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
++    {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
++    {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
++  };
++#endif /* +GSG 030307 */
++
++#ifdef _CPHAL_CPMAC /* +RC 3.02 */
++static void resetWait(HAL_DEVICE *HalDev)
++  {                                                                  /*+RC3.02*/
++  const int TickReset=64;
++  osfuncSleep((int*)&TickReset);
++  }                                                                  /*+RC3.02*/
++#endif /* +RC 3.02 */
++
++/* I only define the reset base function for the modules
++   that can perform a reset.  The AAL5 and AAL2 modules
++   do not perform a reset, that is done by the shared module
++   CPSAR */
++#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
++/*
++ *  Determines the reset register address to be used for a particular device.
++ *  It will search the current device entry for Locator information.  If the
++ *  device is a root device, there will be no Locator information, and the
++ *  function will find and return the root reset register.  If a Locator value
++ *  is found, the function will search each VLYNQ device entry in the system
++ *  looking for a matching Locator.  Once it finds a VLYNQ device entry with
++ *  a matching Locator, it will extract the "ResetBase" parameter from that
++ *  VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
++ *  @param  ResetBase Pointer to integer address of reset register.
++ *
++ *  @return 0 OK, Non-zero not OK
++ */
++static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
++  {
++   char *DeviceInfo = HalDev->DeviceInfo;
++   char *MyLocator, *NextLocator;
++   int Inst=1;
++   bit32u error_code;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
++      osfuncSioFlush();
++     }
++#endif
++
++   error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
++   if (error_code)
++     {
++      /* if no Locator value, device is on the root, so get the "reset" device */
++      error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
++      if  (error_code)
++        {
++         return(EC_VAL_DEVICE_NOT_FOUND);
++        }
++
++      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
++      if (error_code)
++        {
++         return(EC_VAL_BASE_ADDR_NOT_FOUND);
++        }
++
++      *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
++
++      /* found base address for root device, so we're done */
++      return (EC_NO_ERRORS);
++     }
++    else
++     {
++      /* we have a Locator value, so the device is remote */
++
++      /* Find a vlynq device with a matching locator value */
++      while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
++        {
++         error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
++         if (error_code)
++           {
++            /* no Locator value for this VLYNQ, so move on */
++            continue;
++           }
++         if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
++           {
++            /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
++            error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
++            if (error_code)
++              {
++               return(EC_VAL_BASE_ADDR_NOT_FOUND);
++              }
++            *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
++
++            /* found base address for root device, so we're done */
++            return (EC_NO_ERRORS);
++           }
++         Inst++;
++        } /* while */
++     } /* else */
++
++   return (EC_NO_ERRORS);
++  }
++#endif
++
++#ifndef _CPHAL_AAL2 /* + RC 3.02 */
++static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
++  {
++   bit32u ParmValue;
++   bit32 error_code;
++   char *DeviceInfo = HalDev->DeviceInfo;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
++   if (error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
++     }
++   HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
++
++#ifndef _CPHAL_AAL5
++#ifndef _CPHAL_AAL2
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
++   if(error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
++     }
++   HalDev->ResetBit = ParmValue;
++
++   /* Get reset base address */
++   error_code = ResetBaseGet(HalDev, &ParmValue);
++   if (error_code)
++     return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
++   HalDev->ResetBase = ParmValue;
++#endif
++#endif
++
++#ifndef _CPHAL_CPSAR
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
++   if (error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
++     }
++   HalDev->interrupt = ParmValue;
++#endif
++
++   /* only look for the offset if there is a Locator field, which indicates that
++      the module is a VLYNQ module */
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
++   if (!error_code)
++     {
++      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
++      if (error_code)
++        {
++         return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
++        }
++      HalDev->offset = ParmValue;
++     }
++    else
++      HalDev->offset = 0;
++
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
++   if (!error_code) HalDev->debug = ParmValue;
++
++   return (EC_NO_ERRORS);
++  }
++#endif /* +RC 3.02 */
++
++#ifdef _CPHAL_CPMAC /* +RC 3.02 */
++static void StatsInit(HAL_DEVICE *HalDev)                             /* +() RC3.02 */
++  {
++   /* even though these statistics may be for multiple channels and
++      queues, i need only configure the pointer to the beginning
++      of the array, and I can index from there if necessary */
++
++#ifdef _CPHAL_AAL5
++   StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
++   StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
++   StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
++   StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
++
++   StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
++   StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
++   StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
++   StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
++   StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
++   StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
++   StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
++   StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
++   StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
++   StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
++   StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
++#endif
++
++#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
++   StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
++   StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
++   StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
++   StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
++   StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
++   StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
++   StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
++   StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
++   StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
++   StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
++   StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
++   StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
++   StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
++   StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
++
++   StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
++   StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
++   StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
++   StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
++   StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
++   StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
++   StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
++#ifdef _CPHAL_AAL5
++   StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
++   StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
++   StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
++   StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
++   StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
++   StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
++   StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
++   StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
++   StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
++   StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
++   StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
++   StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
++   StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
++#endif
++#endif
++
++   StatsTable4[0].StatPtr  = &HalDev->dev_base;
++   StatsTable4[1].StatPtr  = &HalDev->offset;
++   StatsTable4[2].StatPtr  = &HalDev->interrupt;
++   StatsTable4[3].StatPtr  = &HalDev->debug;
++   StatsTable4[4].StatPtr  = &HalDev->Inst;
++  }
++#endif /* +RC 3.02 */
++
++#ifndef _CPHAL_CPSAR /* +RC 3.02 */
++#ifndef _CPHAL_AAL2 /* +RC 3.02 */
++/*
++ *  Returns statistics information.
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return 0
++ */
++static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
++  {
++   int Size;
++   bit32u *AddrPtr;
++   char *DataPtr;
++   STATS_TABLE *StatsTable;
++   int i, NumberOfStats;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
++                (bit32u)HalDev, (bit32u)StatPtr);
++      osfuncSioFlush();
++     }
++#endif
++
++   StatsTable = StatsDb[Index].StatTable;
++   NumberOfStats = StatsDb[Index].NumberOfStats;
++
++   Size = sizeof(bit32u)*((NumberOfStats*2)+1);
++   Size += (NumberOfStats*11);
++   *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
++
++   AddrPtr = (bit32u *) *StatPtr;
++   DataPtr = (char *)AddrPtr;
++   DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
++
++   for (i=0; i<NumberOfStats; i++)
++     {
++      *AddrPtr++ = (bit32u)StatsTable[i].StatName;
++      *AddrPtr++ = (bit32u)DataPtr;
++      if (&StatsTable[i].StatPtr[Ch] != 0)
++        {
++         switch(StatsTable[i].DataType)
++           {
++            case 0:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
++              break;
++            case 1:
++              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
++              break;
++            case 2:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
++              break;
++            case 3:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
++              break;
++            case 4:
++              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
++              break;
++            default:
++              /* invalid data type, due to CPHAL programming error */
++              break;
++           }
++        }
++       else
++        {
++         /* invalid statistics pointer, probably was not initialized */
++        }
++      DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
++     }
++
++   *AddrPtr = (bit32u) 0;
++
++   return (EC_NO_ERRORS);
++  }
++#endif /* +RC 3.02 */
++#endif /* +RC 3.02 */
++
++#ifdef _CPHAL_CPMAC
++static void gpioFunctional(int base, int bit)
++  {                                                                  /*+RC3.02*/
++  bit32u GpioEnr = base + 0xC;
++  /*  To make functional, set to zero  */
++  *(volatile bit32u *)(GpioEnr) &= ~(1 << bit);                      /*+RC3.02*/
++  }                                                                  /*+RC3.02*/
++
++
++/*+RC3.02*/
++/* Common function, Checks to see if GPIO should be in functional mode */
++static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
++  {                                                                  /*+RC3.02*/
++  int rc;
++  void *DeviceInfo;
++  char *pszMuxBits;
++  char pszMuxBit[20];
++  char *pszTmp;
++  char szMuxBit[20];
++  char *ptr;
++  int base;
++  int reset_bit;
++  int bit;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++
++  rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
++  if(rc) return;
++  /*  gpio entry found, get GPIO register info and make functional  */
++
++  /* temp copy until FinParmValue fixed */
++  ptr = &szMuxBit[0];
++  while ((*ptr++ = *pszTmp++));
++
++  pszMuxBits = &szMuxBit[0];
++
++  rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
++  if(rc) return;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
++  if(rc) return;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
++  if(rc) return;
++
++  /* If GPIO still in reset, then exit  */
++  if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
++    return;
++  /*  format for gpio_mux is  gpio_mux = <int>;<int>;<int>...*/
++  while (*pszMuxBits)
++    {
++    pszTmp = &pszMuxBit[0];
++    if(*pszMuxBits == ';') pszMuxBits++;
++    while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
++      {
++      osfuncSioFlush();
++      /*If value not a number, skip */
++      if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
++        pszMuxBits++;
++      else
++        *pszTmp++ = *pszMuxBits++;
++      }
++    *pszTmp = '\0';
++    bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
++    gpioFunctional(base, bit);
++    resetWait(HalDev);  /* not sure if this is needed */
++    }
++  }                                                                  /*+RC3.02*/
++#endif  /* CPMAC  */
++
++#ifdef _CPHAL_AAL5
++const char hcSarFrequency[] = "SarFreq";
++#endif
++
++#endif  /* _INC  */
+diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.h
+--- linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.h	2005-08-23 04:46:50.082845976 +0200
+@@ -0,0 +1,79 @@
++#ifndef _INC_CPCOMMON_H
++#define _INC_CPCOMMON_H
++
++#define VOLATILE32(addr)  (*(volatile bit32u *)(addr))
++#ifndef dbgPrintf
++#define dbgPrintf HalDev->OsFunc->Printf
++#endif
++
++#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
++
++#define DBG(level)  (HalDev->debug & (1<<(level)))
++/*
++#define DBG0()      DBG(0)
++#define DBG1()      DBG(1)
++#define DBG2()      DBG(2)
++#define DBG3()      DBG(3)
++#define DBG4()      DBG(4)
++#define DBG5()      DBG(5)
++#define DBG6()      DBG(6)
++#define DBG7()      DBG(7)
++*/
++
++/*
++ *  List of defined actions for use with Control().
++ */
++typedef enum 
++  {
++   enGET=0,     /**< Get the value associated with a key */
++   enSET,       /**< Set the value associates with a key */
++   enCLEAR,     /**<Clear the value */ 
++   enNULL       /**< No data action, used to initiate a service or send a message */
++  }ACTION;
++
++/*
++ *  Enumerated hardware states.
++ */
++typedef enum
++  {
++   enConnected=1, enDevFound, enInitialized, enOpened
++  }DEVICE_STATE;
++
++typedef enum 
++  {
++   enCommonStart=0,
++   /* General  */
++   enOff, enOn, enDebug, 
++   /* Module General */
++   enCpuFreq, 
++   enStatus,
++   enCommonEnd
++   }COMMON_KEY;
++
++typedef struct
++  {
++   const char  *strKey;
++   int  enKey;
++  }CONTROL_KEY;
++
++typedef struct
++  {
++   char *StatName;
++   unsigned int *StatPtr;
++   int DataType; /* 0: int, 1: hex int, 2:channel data */
++  }STATS_TABLE;
++
++typedef struct
++  {
++   int NumberOfStats;
++   STATS_TABLE *StatTable;
++  }STATS_DB;
++
++#define osfuncSioFlush()    HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
++#define osfuncSleep(Ticks)  HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
++#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
++
++#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
++
++#endif
++
+diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.c linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.c
+--- linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.c	2005-08-23 04:46:50.082845976 +0200
+@@ -0,0 +1,728 @@
++#ifndef _INC_CPCOMMON_C
++#define _INC_CPCOMMON_C
++
++#ifdef _CPHAL_CPMAC
++#include "cpremap_cpmac.c"
++#endif
++
++#ifdef _CPHAL_AAL5
++#include "cpremap_cpaal5.c"
++#endif
++
++#ifdef _CPHAL_CPSAR
++#include "cpremap_cpsar.c"
++#endif
++
++#ifdef _CPHAL_AAL2
++#include "cpremap_cpaal2.c"
++#endif
++
++/**
++@defgroup Common_Config_Params Common Configuration Parameters
++
++This section documents the configuration parameters that are valid across
++all CPHAL devices.
++@{
++*/
++/** This is the debug level.  The field is bit defined, such that the user
++should set to 1 all the bits corresponding to desired debug outputs.  The following 
++are the meanings for each debug bit:
++- bit0 (LSB): CPHAL Function Trace
++- b1 : OS Function call trace
++- b2 : Critical section entry/exit
++- b3 : Memory allocation/destruction
++- b4 : Detailed information in Rx path
++- b5 : Detailed information in Tx path
++- b6 : Extended error information
++- b7 : General info
++*/
++static const char pszDebug[]        = "debug";
++/** CPU Frequency. */
++/*static const char pszCpuFreq[]      = "CpuFreq";*/               /*MJH-030403*/
++/** Base address for the module. */
++static const char pszBase[]         = "base";
++/** Reset bit for the module. */
++static const char pszResetBit[]     = "reset_bit";
++/** Reset base address for the module. */
++static const char pszResetBase[]    = "ResetBase";
++/** Interrupt line for the module. */
++static const char pszIntLine[]      = "int_line";
++/** VLYNQ offset for the module.  Disregard if not using VLYNQ. */
++static const char pszOffset[]       = "offset";
++/** The OS may "Get" this parameter, which is a pointer
++    to a character string that indicates the version of CPHAL. */
++static const char pszVer[]          = "Version";
++/*@}*/
++
++/**
++@defgroup Common_Control_Params Common Keys for [os]Control()
++
++This section documents the keys used with the OS @c Control() interface that
++are required by CPHAL devices.
++
++@{
++*/
++/** Used to wait for an integer number of clock ticks, given as an integer
++    pointer in the @p Value parameter.  No actions are defined. */
++static const char pszSleep[]             = "Sleep";
++/** Requests the OS to flush it's IO buffers.  No actions are defined. */
++static const char pszSioFlush[]          = "SioFlush";
++/*@}*/
++
++static const char pszStateChange[]       = "StateChange";
++static const char pszStatus[]            = "Status";
++
++static const char pszGET[]               = "Get";
++static const char pszSET[]               = "Set";
++static const char pszCLEAR[]             = "Clear";
++static const char pszNULL[]              = "";
++static const char pszLocator[]           = "Locator";
++static const char pszOff[]               = "Off";
++static const char pszOn[]                = "On";
++static const char hcMaxFrags[]           = "MaxFrags";
++
++#ifdef _CPHAL_CPMAC
++
++/*  New method for string constants */
++const char hcClear[]  = "Clear";
++const char hcGet[]    = "Get";
++const char hcSet[]    = "Set";
++
++const char hcTick[]   = "Tick";
++
++static const CONTROL_KEY KeyCommon[] =
++   {
++     {""                   , enCommonStart},
++     {pszStatus            , enStatus},
++     {pszOff               , enOff},
++     {pszOn                , enOn},
++     {pszDebug             , enDebug},
++     {hcCpuFrequency       , enCpuFreq},                           /*MJH~030403*/
++     {""                   , enCommonEnd}
++   };
++#endif
++
++/**
++@defgroup Common_Statistics Statistics
++
++A broad array of module statistics is available.  Statistics values are accessed
++through the @c Control() interface of the CPHAL.  There are 5 different levels
++of statistics, each of which correspond to a unique set of data.  Furthermore,
++certain statistics data is indexed by using a channel number and Tx queue number.
++The following is a brief description of each statistics level, along with the
++indexes used for the level:
++
++- Level 0:  Hardware Statistics (index with channel)
++- Level 1:  CPHAL Software Statistics (channel, queue)
++- Level 2:  CPHAL Flags (channel, queue)
++- Level 3:  CPHAL Channel Configuration (channel)
++- Level 4:  CPHAL General Configuration (no index)
++
++The caller requests statistics information by providing a Key string to the
++@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
++The only valid Action parameter for statistics usage is "Get".
++
++Code Examples:
++@code
++unsigned int *StatsData;
++
++# Get Level 0 stats for Channel 1
++HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
++
++# Get Level 2 stats for Channel 0, Queue 0
++HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
++
++# Get Level 4 stats
++HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
++@endcode
++
++The information returned in the Value parameter of @c Control() is an
++array of pointers to strings.  The pointers are arranged in pairs.
++The first pointer is a pointer to a name string for a particular statistic.
++The next pointer is a pointer to a string containing the representation of
++the integer statistic value corresponding to the first pointer.  This is followed
++by another pair of pointers, and so on, until a NULL pointer is encountered.  The
++following is example code for processing the statistics data.  Note that the OS
++is responsible for freeing the memory passed back through the Value parameter of
++@c Control().
++
++@code
++unsigned int *StatsData;
++
++# Get Level 0 stats for Channel 1
++HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
++
++# output Statistics data
++PrintStats(StatsData);
++
++# the upper layer is responsible for freeing stats info
++free(&StatsPtr);
++
++...
++
++void PrintStats(unsigned int *StatsPtr)
++  {
++   while(*StatsPtr)
++     {
++      printf("%20s:",  (char *)*StatsPtr);
++      StatsPtr++;
++      printf("%11s\n", (char *)*StatsPtr);
++      StatsPtr++;
++     }
++   MySioFlush();
++  }
++@endcode
++
++Within each statistics level, there are several statistics defined.  The statistics that
++are common to every CPPI module are listed below.  In addition, each module may define
++extra statistics in each level, which will be documented within the module-specific
++documentation appendices.
++
++- Level 0 Statistics
++  - All level 0 statistics are module-specific.
++- Level 1 Statistics (CPHAL Software Statistics)
++  - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
++  - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
++transmitting the previous last packet in the queue (per channel and queue).
++  - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
++reception of the previous last packet in the queue (per channel).
++  - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
++  - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
++  - RxPacketsServiced: Number of received packets (per channel).
++  - TxPacketsServiced: Number of transmitted packets (per channel and queue).
++  - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
++  - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
++  - RxTotal: Total number of received packets, all channels.
++  - TxTotal: Total number of transmitted packets, all channels and queues.
++- Level 2 Statistics (CPHAL Flags)
++  - RcbPool: Pointer to receive descriptor pool (per channel).
++  - RxActQueueCount: Number of buffers currently available for receive (per channel).
++  - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
++  - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
++  - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
++  - RcbStart: Pointer to block of receive descriptors.
++  - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
++  - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
++  - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
++  - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
++  - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
++  - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
++  - TcbStart: Pointer to block of transmit descriptors.
++  - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
++- Level 3 Statistics (CPHAL Channel Configuration)
++  - RxBufSize: Rx buffer size.
++  - RxBufferOffset: Rx buffer offset.
++  - RxNumBuffers: Number of Rx buffers.
++  - RxServiceMax: Maximum number of receive packets to service at a time.
++  - TxNumBuffers: Number of Tx buffer descriptors.
++  - TxNumQueues: Number of Tx queues to use.
++  - TxServiceMax: Maximum number of transmit packets to service at a time.
++- Level 4 Statistics (CPHAL General Configuration)
++  - Base Address: Base address of the module.
++  - Offset (VLYNQ): VLYNQ relative module offset.
++  - Interrupt Line: Interrupt number.
++  - Debug: Debug flag, 1 to enable debug.
++  - Inst: Instance number.
++*/
++
++/* 
++   Data Type 0 = int display
++   Data Type 1 = hex display
++   Data Type 2 = channel structure, int display
++   Data Type 3 = queue index and int display
++   Data Type 4 = queue index and hex display
++*/
++#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
++static STATS_TABLE StatsTable0[] =
++  {
++#ifdef _CPHAL_AAL5
++   /* Name ,        Data Ptr,   Data Type */
++   {"Crc Errors",          0,          0},
++   {"Len Errors",          0,          0},
++   {"Abort Errors",        0,          0},
++   {"Starv Errors",        0,          0}
++#endif
++#ifdef _CPHAL_CPMAC
++   {"Rx Good Frames",      0,          0}
++#endif
++  };
++
++static STATS_TABLE StatsTable1[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"DmaLenErrors",        0,          0},
++   {"TxMisQCnt",           0,          3},
++   {"RxMisQCnt",           0,          0},
++   {"TxEOQCnt",            0,          3},
++   {"RxEOQCnt",            0,          0},
++   {"RxPacketsServiced",   0,          0},
++   {"TxPacketsServiced",   0,          3},
++   {"RxMaxServiced",       0,          0},
++   {"TxMaxServiced",       0,          3},
++   {"RxTotal",             0,          0},
++   {"TxTotal",             0,          0},
++  };
++
++static STATS_TABLE StatsTable2[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"RcbPool",             0,          1},
++   {"RxActQueueCount",     0,          0},
++   {"RxActQueueHead",      0,          1},
++   {"RxActQueueTail",      0,          1},
++   {"RxActive",            0,          0},
++   {"RcbStart",            0,          1},
++   {"RxTeardownPending",   0,          0},
++   {"TcbPool",             0,          4},
++   {"TxActQueueCount",     0,          3},
++   {"TxActQueueHead",      0,          4},
++   {"TxActQueueTail",      0,          4},
++   {"TxActive",            0,          3},
++   {"TcbStart",            0,          4},
++   {"TxTeardownPending",   0,          0}
++  };
++
++static STATS_TABLE StatsTable3[] =
++  {
++   /* Name ,        Data Ptr,   Data Type */
++   {"RxBufSize",           0,          2},
++   {"RxBufferOffset",      0,          2},
++   {"RxNumBuffers",        0,          2},
++   {"RxServiceMax",        0,          2},
++   {"TxNumBuffers",        0,          2},
++   {"TxNumQueues",         0,          2},
++   {"TxServiceMax",        0,          2},
++#ifdef _CPHAL_AAL5
++   {"CpcsUU",              0,          2},
++   {"Gfc",                 0,          2},
++   {"Clp",                 0,          2},
++   {"Pti",                 0,          2},
++   {"DaMask",              0,          2},
++   {"Priority",            0,          2},
++   {"PktType",             0,          2},
++   {"Vci",                 0,          2},
++   {"Vpi",                 0,          2},
++   {"CellRate",            0,          2},
++   {"QosType",             0,          2},
++   {"Mbs",                 0,          2},
++   {"Pcr",                 0,          2}
++#endif
++  };
++
++static STATS_TABLE StatsTable4[] =
++  {
++   {"Base Address",        0,          1},
++   {"Offset (VLYNQ)",      0,          0},
++   {"Interrupt Line",      0,          0},
++   {"Debug",               0,          0},
++   {"Instance",            0,          0},
++#ifdef _CPHAL_AAL5
++   {"UniNni",              0,          0}
++#endif
++  };
++
++static STATS_DB StatsDb[] =
++  {
++    {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
++    {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
++    {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
++    {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
++    {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
++  };
++#endif /* +GSG 030307 */
++
++#ifdef _CPHAL_CPMAC /* +RC 3.02 */
++static void resetWait(HAL_DEVICE *HalDev)
++  {                                                                  /*+RC3.02*/
++  const int TickReset=64;
++  osfuncSleep((int*)&TickReset);
++  }                                                                  /*+RC3.02*/
++#endif /* +RC 3.02 */
++
++/* I only define the reset base function for the modules
++   that can perform a reset.  The AAL5 and AAL2 modules
++   do not perform a reset, that is done by the shared module
++   CPSAR */
++#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
++/*
++ *  Determines the reset register address to be used for a particular device.
++ *  It will search the current device entry for Locator information.  If the
++ *  device is a root device, there will be no Locator information, and the
++ *  function will find and return the root reset register.  If a Locator value
++ *  is found, the function will search each VLYNQ device entry in the system
++ *  looking for a matching Locator.  Once it finds a VLYNQ device entry with
++ *  a matching Locator, it will extract the "ResetBase" parameter from that
++ *  VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
++ *  @param  ResetBase Pointer to integer address of reset register.
++ *
++ *  @return 0 OK, Non-zero not OK
++ */
++static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
++  {
++   char *DeviceInfo = HalDev->DeviceInfo;
++   char *MyLocator, *NextLocator;
++   int Inst=1;
++   bit32u error_code;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
++      osfuncSioFlush();
++     }
++#endif
++
++   error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
++   if (error_code)
++     {
++      /* if no Locator value, device is on the root, so get the "reset" device */
++      error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
++      if  (error_code)
++        {
++         return(EC_VAL_DEVICE_NOT_FOUND);
++        }
++
++      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
++      if (error_code)
++        {
++         return(EC_VAL_BASE_ADDR_NOT_FOUND);
++        }
++
++      *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
++
++      /* found base address for root device, so we're done */
++      return (EC_NO_ERRORS);
++     }
++    else
++     {
++      /* we have a Locator value, so the device is remote */
++
++      /* Find a vlynq device with a matching locator value */
++      while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
++        {
++         error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
++         if (error_code)
++           {
++            /* no Locator value for this VLYNQ, so move on */
++            continue;
++           }
++         if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
++           {
++            /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
++            error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
++            if (error_code)
++              {
++               return(EC_VAL_BASE_ADDR_NOT_FOUND);
++              }
++            *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
++
++            /* found base address for root device, so we're done */
++            return (EC_NO_ERRORS);
++           }
++         Inst++;
++        } /* while */
++     } /* else */
++
++   return (EC_NO_ERRORS);
++  }
++#endif
++
++#ifndef _CPHAL_AAL2 /* + RC 3.02 */
++static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
++  {
++   bit32u ParmValue;
++   bit32 error_code;
++   char *DeviceInfo = HalDev->DeviceInfo;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
++   if (error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
++     }
++   HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
++
++#ifndef _CPHAL_AAL5
++#ifndef _CPHAL_AAL2
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
++   if(error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
++     }
++   HalDev->ResetBit = ParmValue;
++
++   /* Get reset base address */
++   error_code = ResetBaseGet(HalDev, &ParmValue);
++   if (error_code)
++     return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
++   HalDev->ResetBase = ParmValue;
++#endif
++#endif
++
++#ifndef _CPHAL_CPSAR
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
++   if (error_code)
++     {
++      return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
++     }
++   HalDev->interrupt = ParmValue;
++#endif
++
++   /* only look for the offset if there is a Locator field, which indicates that
++      the module is a VLYNQ module */
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
++   if (!error_code)
++     {
++      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
++      if (error_code)
++        {
++         return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
++        }
++      HalDev->offset = ParmValue;
++     }
++    else
++      HalDev->offset = 0;
++
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
++   if (!error_code) HalDev->debug = ParmValue;
++
++   return (EC_NO_ERRORS);
++  }
++#endif /* +RC 3.02 */
++
++#ifdef _CPHAL_CPMAC /* +RC 3.02 */
++static void StatsInit(HAL_DEVICE *HalDev)                             /* +() RC3.02 */
++  {
++   /* even though these statistics may be for multiple channels and
++      queues, i need only configure the pointer to the beginning
++      of the array, and I can index from there if necessary */
++
++#ifdef _CPHAL_AAL5
++   StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
++   StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
++   StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
++   StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
++
++   StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
++   StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
++   StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
++   StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
++   StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
++   StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
++   StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
++   StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
++   StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
++   StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
++   StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
++#endif
++
++#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
++   StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
++   StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
++   StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
++   StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
++   StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
++   StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
++   StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
++   StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
++   StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
++   StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
++   StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
++   StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
++   StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
++   StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
++
++   StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
++   StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
++   StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
++   StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
++   StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
++   StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
++   StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
++#ifdef _CPHAL_AAL5
++   StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
++   StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
++   StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
++   StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
++   StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
++   StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
++   StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
++   StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
++   StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
++   StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
++   StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
++   StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
++   StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
++#endif
++#endif
++
++   StatsTable4[0].StatPtr  = &HalDev->dev_base;
++   StatsTable4[1].StatPtr  = &HalDev->offset;
++   StatsTable4[2].StatPtr  = &HalDev->interrupt;
++   StatsTable4[3].StatPtr  = &HalDev->debug;
++   StatsTable4[4].StatPtr  = &HalDev->Inst;
++  }
++#endif /* +RC 3.02 */
++
++#ifndef _CPHAL_CPSAR /* +RC 3.02 */
++#ifndef _CPHAL_AAL2 /* +RC 3.02 */
++/*
++ *  Returns statistics information.
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return 0
++ */
++static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
++  {
++   int Size;
++   bit32u *AddrPtr;
++   char *DataPtr;
++   STATS_TABLE *StatsTable;
++   int i, NumberOfStats;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
++                (bit32u)HalDev, (bit32u)StatPtr);
++      osfuncSioFlush();
++     }
++#endif
++
++   StatsTable = StatsDb[Index].StatTable;
++   NumberOfStats = StatsDb[Index].NumberOfStats;
++
++   Size = sizeof(bit32u)*((NumberOfStats*2)+1);
++   Size += (NumberOfStats*11);
++   *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
++
++   AddrPtr = (bit32u *) *StatPtr;
++   DataPtr = (char *)AddrPtr;
++   DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
++
++   for (i=0; i<NumberOfStats; i++)
++     {
++      *AddrPtr++ = (bit32u)StatsTable[i].StatName;
++      *AddrPtr++ = (bit32u)DataPtr;
++      if (&StatsTable[i].StatPtr[Ch] != 0)
++        {
++         switch(StatsTable[i].DataType)
++           {
++            case 0:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
++              break;
++            case 1:
++              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
++              break;
++            case 2:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
++              break;
++            case 3:
++              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
++              break;
++            case 4:
++              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
++              break;
++            default:
++              /* invalid data type, due to CPHAL programming error */
++              break;
++           }
++        }
++       else
++        {
++         /* invalid statistics pointer, probably was not initialized */
++        }
++      DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
++     }
++
++   *AddrPtr = (bit32u) 0;
++
++   return (EC_NO_ERRORS);
++  }
++#endif /* +RC 3.02 */
++#endif /* +RC 3.02 */
++
++#ifdef _CPHAL_CPMAC
++static void gpioFunctional(int base, int bit)
++  {                                                                  /*+RC3.02*/
++  bit32u GpioEnr = base + 0xC;
++  /*  To make functional, set to zero  */
++  *(volatile bit32u *)(GpioEnr) &= ~(1 << bit);                      /*+RC3.02*/
++  }                                                                  /*+RC3.02*/
++
++
++/*+RC3.02*/
++/* Common function, Checks to see if GPIO should be in functional mode */
++static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
++  {                                                                  /*+RC3.02*/
++  int rc;
++  void *DeviceInfo;
++  char *pszMuxBits;
++  char pszMuxBit[20];
++  char *pszTmp;
++  char szMuxBit[20];
++  char *ptr;
++  int base;
++  int reset_bit;
++  int bit;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++
++  rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
++  if(rc) return;
++  /*  gpio entry found, get GPIO register info and make functional  */
++
++  /* temp copy until FinParmValue fixed */
++  ptr = &szMuxBit[0];
++  while ((*ptr++ = *pszTmp++));
++
++  pszMuxBits = &szMuxBit[0];
++
++  rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
++  if(rc) return;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
++  if(rc) return;
++
++  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
++  if(rc) return;
++
++  /* If GPIO still in reset, then exit  */
++  if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
++    return;
++  /*  format for gpio_mux is  gpio_mux = <int>;<int>;<int>...*/
++  while (*pszMuxBits)
++    {
++    pszTmp = &pszMuxBit[0];
++    if(*pszMuxBits == ';') pszMuxBits++;
++    while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
++      {
++      osfuncSioFlush();
++      /*If value not a number, skip */
++      if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
++        pszMuxBits++;
++      else
++        *pszTmp++ = *pszMuxBits++;
++      }
++    *pszTmp = '\0';
++    bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
++    gpioFunctional(base, bit);
++    resetWait(HalDev);  /* not sure if this is needed */
++    }
++  }                                                                  /*+RC3.02*/
++#endif  /* CPMAC  */
++
++#ifdef _CPHAL_AAL5
++const char hcSarFrequency[] = "SarFreq";
++#endif
++
++#endif  /* _INC  */
+diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.h linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.h
+--- linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.h	2005-08-23 04:46:50.083845824 +0200
+@@ -0,0 +1,79 @@
++#ifndef _INC_CPCOMMON_H
++#define _INC_CPCOMMON_H
++
++#define VOLATILE32(addr)  (*(volatile bit32u *)(addr))
++#ifndef dbgPrintf
++#define dbgPrintf HalDev->OsFunc->Printf
++#endif
++
++#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
++
++#define DBG(level)  (HalDev->debug & (1<<(level)))
++/*
++#define DBG0()      DBG(0)
++#define DBG1()      DBG(1)
++#define DBG2()      DBG(2)
++#define DBG3()      DBG(3)
++#define DBG4()      DBG(4)
++#define DBG5()      DBG(5)
++#define DBG6()      DBG(6)
++#define DBG7()      DBG(7)
++*/
++
++/*
++ *  List of defined actions for use with Control().
++ */
++typedef enum 
++  {
++   enGET=0,     /**< Get the value associated with a key */
++   enSET,       /**< Set the value associates with a key */
++   enCLEAR,     /**<Clear the value */ 
++   enNULL       /**< No data action, used to initiate a service or send a message */
++  }ACTION;
++
++/*
++ *  Enumerated hardware states.
++ */
++typedef enum
++  {
++   enConnected=1, enDevFound, enInitialized, enOpened
++  }DEVICE_STATE;
++
++typedef enum 
++  {
++   enCommonStart=0,
++   /* General  */
++   enOff, enOn, enDebug, 
++   /* Module General */
++   enCpuFreq, 
++   enStatus,
++   enCommonEnd
++   }COMMON_KEY;
++
++typedef struct
++  {
++   const char  *strKey;
++   int  enKey;
++  }CONTROL_KEY;
++
++typedef struct
++  {
++   char *StatName;
++   unsigned int *StatPtr;
++   int DataType; /* 0: int, 1: hex int, 2:channel data */
++  }STATS_TABLE;
++
++typedef struct
++  {
++   int NumberOfStats;
++   STATS_TABLE *StatTable;
++  }STATS_DB;
++
++#define osfuncSioFlush()    HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
++#define osfuncSleep(Ticks)  HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
++#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
++
++#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
++
++#endif
++
+diff -urN linux.old/drivers/atm/sangam_atm/cppi_cpaal5.c linux.dev/drivers/atm/sangam_atm/cppi_cpaal5.c
+--- linux.old/drivers/atm/sangam_atm/cppi_cpaal5.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cppi_cpaal5.c	2005-08-23 04:46:50.084845672 +0200
+@@ -0,0 +1,1483 @@
++/*************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE: cppi.c
++ *
++ *  DESCRIPTION:
++ *      This file contains shared code for all CPPI modules.
++ *
++ *  HISTORY:
++ *   7Aug02 Greg RC1.00  Original Version created.
++ *  27Sep02 Mick RC1.01  Merged for use by CPMAC/CPSAR
++ *  16Oct02 Mick RC1.02  Performance Tweaks (see cppihist.txt)
++ *  12Nov02 Mick RC1.02  Updated to use cpmac_reg.h
++ *  09Jan03 Mick RC3.01  Removed modification to RxBuffer ptr
++ *  28Mar03 Mick 1.03    RxReturn now returns error if Malloc Fails
++ *  10Apr03 Mick 1.03.02 Added Needs Buffer Support
++ *  11Jun03 Mick 1.06.02 halSend() errors corrected
++ *
++ *  @author  Greg Guyotte
++ *  @version 1.00
++ *  @date    7-Aug-2002
++ *****************************************************************************/
++/* each CPPI module must modify this file, the rest of the
++                     code in cppi.c should be totally shared *//* Each CPPI module MUST properly define all constants shown below */
++
++/* CPPI registers */
++
++/* the following defines are not CPPI specific, but still used by cppi.c */
++
++static void FreeRx(HAL_DEVICE *HalDev, int Ch)
++  {
++   HAL_RCB *rcb_ptr;                                                /*+GSG 030303*/
++   int rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;                        /*+GSG 030303*/
++   int Num = HalDev->ChData[Ch].RxNumBuffers, i;                    /*+GSG 030303*/
++
++   /* Free Rx data buffers attached to descriptors, if necessary */
++   if (HalDev->RcbStart[Ch] != 0)                                   /*+GSG 030303*/
++     {                                                              /*+GSG 030303*/
++      for(i=0;i<Num;i++)                                            /*+GSG 030303*/
++        {                                                           /*+GSG 030303*/
++         rcb_ptr = (HAL_RCB *)(HalDev->RcbStart[Ch] + (i*rcbSize)); /*+GSG 030303*/
++
++         /* free the data buffer */
++         if (rcb_ptr->DatPtr != 0)
++       {
++
++        HalDev->OsFunc->FreeRxBuffer((void *)rcb_ptr->OsInfo, (void *)rcb_ptr->DatPtr);
++        rcb_ptr->OsInfo=0;                                        /*MJH+030522*/
++        rcb_ptr->DatPtr=0;                                        /*MJH+030522*/
++       }
++    }                                                           /*+GSG 030303*/
++     }                                                              /*+GSG 030303*/
++
++   /* free up all desciptors at once */
++   HalDev->OsFunc->FreeDmaXfer(HalDev->RcbStart[Ch]);
++
++   /* mark buffers as freed */
++   HalDev->RcbStart[Ch] = 0;
++  }
++
++static void FreeTx(HAL_DEVICE *HalDev, int Ch, int Queue)
++  {
++
++/*+GSG 030303*/
++
++   /* free all descriptors at once */
++   HalDev->OsFunc->FreeDmaXfer(HalDev->TcbStart[Ch][Queue]);
++
++   HalDev->TcbStart[Ch][Queue] = 0;
++  }
++
++/* return of 0 means that this code executed, -1 means the interrupt was not
++   a teardown interrupt */
++static int RxTeardownInt(HAL_DEVICE *HalDev, int Ch)
++  {
++   bit32u base = HalDev->dev_base;
++
++   int i;
++   volatile bit32u *pTmp;
++
++   /* check to see if the interrupt is a teardown interrupt */
++   if (((*(pRX_CPPI_COMP_PTR( base )+( Ch *64)))  & TEARDOWN_VAL) == TEARDOWN_VAL)
++     {
++      /* finish channel teardown */
++
++      /* Free channel resources on a FULL teardown */
++      if (HalDev->RxTeardownPending[Ch] & FULL_TEARDOWN)
++        {
++         FreeRx(HalDev, Ch);
++        }
++
++      /* bug fix - clear Rx channel pointers on teardown */
++      HalDev->RcbPool[Ch] = 0;
++      HalDev->RxActQueueHead[Ch]  = 0;
++      HalDev->RxActQueueCount[Ch] = 0;
++      HalDev->RxActive[Ch] = FALSE;
++
++      /* write completion pointer */
++      (*(pRX_CPPI_COMP_PTR( base )+( Ch *64)))  = TEARDOWN_VAL;
++
++      /* use direction bit as a teardown pending bit! May be able to
++         use only one teardown pending integer in HalDev */
++
++      HalDev->RxTeardownPending[Ch] &= ~RX_TEARDOWN;
++
++      HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
++
++      /* call OS Teardown Complete (if TX is also done) */
++      if ((HalDev->TxTeardownPending[Ch] & TX_TEARDOWN) == 0)
++    {
++     /* mark channel as closed */
++         HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
++
++     /* disable channel interrupt */
++     SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
++         SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<(Ch+16)); /* +GSG 030307 */
++     SAR_RX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
++
++     /* Clear PDSP Channel State RAM */
++     pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+(Ch*64));
++     for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
++       *pTmp++ = 0;
++
++     if ((HalDev->RxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
++       {
++
++        HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX|DIRECTION_RX);
++       }
++     /* clear all teardown pending information for this channel */
++     HalDev->RxTeardownPending[Ch] = 0;
++     HalDev->TxTeardownPending[Ch] = 0;
++    }
++
++      return (EC_NO_ERRORS);
++     }
++   return (-1);
++  }
++
++/* return of 0 means that this code executed, -1 means the interrupt was not
++   a teardown interrupt */
++static int TxTeardownInt(HAL_DEVICE *HalDev, int Ch, int Queue)
++  {
++   bit32u base = HalDev->dev_base;
++   HAL_TCB *Last, *Curr, *First;                                    /*+GSG 030303*/
++
++   int i;
++   volatile bit32u *pTmp;
++
++   if (((*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue )))  & TEARDOWN_VAL) == TEARDOWN_VAL)
++     {
++      /* return outstanding buffers to OS                             +RC3.02*/
++      Curr = HalDev->TxActQueueHead[Ch][Queue];                     /*+GSG 030303*/
++      First = Curr;                                                 /*+GSG 030303*/
++      while (Curr)                                                  /*+GSG 030303*/
++    {                                                           /*+GSG 030303*/
++     /* Pop TCB(s) for packet from the stack */                 /*+GSG 030303*/
++         Last = Curr->Eop;                                          /*+GSG 030303*/
++         HalDev->TxActQueueHead[Ch][Queue] = Last->Next;            /*+GSG 030303*/
++                                                                    /*+GSG 030303*/
++         /* return to OS */                                         /*+GSG 030303*/
++         HalDev->OsFunc->SendComplete(Curr->OsInfo);                /*+GSG 030303*/
++                                                                    /*+GSG 030303*/
++         /* Push Tcb(s) back onto the stack */                      /*+GSG 030303*/
++         Curr = Last->Next;                                         /*+GSG 030303*/
++         Last->Next = HalDev->TcbPool[Ch][Queue];                   /*+GSG 030303*/
++         HalDev->TcbPool[Ch][Queue] = First;                        /*+GSG 030303*/
++                                                                    /*+GSG 030303*/
++         /* set the first(SOP) pointer for the next packet */       /*+GSG 030303*/
++         First = Curr;                                              /*+GSG 030303*/
++    }                                                           /*+GSG 030303*/
++
++      /* finish channel teardown */
++
++      /* save the OsInfo to pass to upper layer
++         THIS WAS CRASHING - because it's possible that I get the teardown
++     notification and the TcbHPool is null.  In this case, the buffers
++     to free can be found in the TxHActiveQueue.  If I need to get OsInfo
++     in the future, I can get it from one of those buffers.
++     OsInfo = HalDev->TcbHPool[Ch]->OsInfo; */
++
++      if (HalDev->TxTeardownPending[Ch] & FULL_TEARDOWN)
++        {
++     FreeTx(HalDev, Ch, Queue);
++    } /* if FULL teardown */
++
++      /* bug fix - clear Tx channel pointers on teardown */
++      HalDev->TcbPool[Ch][Queue] = 0;
++      HalDev->TxActQueueHead[Ch][Queue]  = 0;
++      HalDev->TxActQueueCount[Ch][Queue] = 0;
++      HalDev->TxActive[Ch][Queue]        = FALSE;
++
++      /* write completion pointer */
++      (*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue )))  = TEARDOWN_VAL;
++
++      /* no longer pending teardown */
++      HalDev->TxTeardownPending[Ch] &= ~TX_TEARDOWN;
++
++      HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
++
++      /* call OS Teardown Complete (if Rx is also done) */
++      if ((HalDev->RxTeardownPending[Ch] & RX_TEARDOWN) == 0)
++    {
++     /* mark channel as closed */
++     HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
++
++     /* disable channel interrupt */
++     SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
++         SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<(Ch+16)); /* +GSG 030307 */
++     SAR_RX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
++
++     /* Clear PDSP Channel State RAM */
++     pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+(Ch*64));
++     for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
++       *pTmp++ = 0;
++
++     if ((HalDev->TxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
++       {
++
++        HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX|DIRECTION_RX);
++       }
++
++     /* clear all teardown pending information for this channel */
++     HalDev->RxTeardownPending[Ch] = 0;
++     HalDev->TxTeardownPending[Ch] = 0;
++    }
++
++      return (EC_NO_ERRORS);
++     }
++   return (-1);
++  }
++
++/* +GSG 030421 */
++static void AddToRxQueue(HAL_DEVICE *HalDev, HAL_RCB *FirstRcb, HAL_RCB *LastRcb, int FragCount, int Ch)
++  {
++   HAL_RCB *OldTailRcb;
++
++   if (HalDev->RxActQueueCount[Ch]==0)
++     {
++
++      HalDev->RxActQueueHead[Ch]=FirstRcb;
++      HalDev->RxActQueueTail[Ch]=LastRcb;
++      HalDev->RxActQueueCount[Ch]=FragCount;
++      if ((!HalDev->InRxInt[Ch])&&(!HalDev->RxActive[Ch]))
++        {
++         /* write Rx Queue Head Descriptor Pointer */
++         (*(pRX_DMA_STATE_WORD_1( HalDev->dev_base )+( Ch *64)))  = VirtToPhys(FirstRcb) - HalDev->offset;
++         HalDev->RxActive[Ch]=TRUE;
++        }
++     }
++    else
++     {
++
++      OldTailRcb=HalDev->RxActQueueTail[Ch];
++      OldTailRcb->Next=(void *)FirstRcb;
++
++      /* Emerald fix 10/29 (Denis) */
++      *((bit32u *) VirtToVirtNoCache(&OldTailRcb->HNext))=VirtToPhys(FirstRcb) - HalDev->offset;
++
++      HalDev->RxActQueueTail[Ch]=LastRcb;
++      HalDev->RxActQueueCount[Ch]+=FragCount;
++     }
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function is called to indicate to the CPHAL that the upper layer
++ *  software has finished processing the receive data (given to it by
++ *  osReceive()).  The CPHAL will then return the appropriate receive buffers
++ *  and buffer descriptors to the available pool.
++ *
++ *  @param   HalReceiveInfo   Start of receive buffer descriptor chain returned to
++ *                      CPHAL.
++ *  @param   StripFlag  Flag indicating whether the upper layer software has
++ *                      retained ownership of the receive data buffers.
++ *<BR>
++ * 'FALSE' means  that the CPHAL can reuse the receive data buffers.
++ *<BR>
++ * 'TRUE' : indicates the data buffers were retained by the OS
++ *<BR>
++ * NOTE:  If StripFlag is TRUE, it is the responsibility of the upper layer software to free the buffers when they are no longer needed.
++ *
++ *  @return EC_NO_ERRORS (ok). <BR>
++ *          Possible Error Codes:<BR>
++ *          @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *          @ref EC_VAL_RCB_NEEDS_BUFFER "EC_VAL_RCB_NEEDS_BUFFER"<BR>
++ *          @ref EC_VAL_RCB_DROPPED "EC_VAL_RCB_DROPPED"<BR>
++ */
++static int halRxReturn(HAL_RECEIVEINFO *HalReceiveInfo,
++            int StripFlag)
++  {
++   int Ch = HalReceiveInfo->Ch, i;
++   HAL_RCB *LastRcb, *TempRcb;
++   char *pBuf;
++   HAL_RCB *CurrHeadRcb = HalReceiveInfo, *LastGoodRcb=0;         /* +GSG 030421 */
++   HAL_DEVICE *HalDev = HalReceiveInfo->HalDev;
++   int RcbSize = HalDev->ChData[Ch].RxBufSize;
++   int FragCount = HalReceiveInfo->FragCount;
++   int rc=0;                                                      /*MJH+030417*/
++   int GoodCount=0;                                               /*GSG+030421*/
++
++   if (HalDev->State != enOpened)
++     return(EC_AAL5 |EC_FUNC_RXRETURN|EC_VAL_INVALID_STATE);
++
++   LastRcb=(HAL_RCB *)HalReceiveInfo->Eop;
++   LastRcb->HNext=0;
++   LastRcb->Next=0;
++
++   if (FragCount>1)
++     {
++      LastRcb->Off_BLen=RcbSize;
++      LastRcb->mode=CB_OWNERSHIP_BIT;
++     }
++
++   HalReceiveInfo->Off_BLen=RcbSize;
++   HalReceiveInfo->mode=CB_OWNERSHIP_BIT;
++
++   /* If OS has kept the buffers for this packet, attempt to alloc new buffers */
++   if (StripFlag)
++     {
++      TempRcb = HalReceiveInfo;
++      for (i=0; i<FragCount; i++)
++        {
++         if (TempRcb == 0)
++           {
++            dbgPrintf("Rx Return error while allocating new buffers\n");
++            dbgPrintf("Rcb = %08x, Rcb->Eop = %08x, FragCount = %d:%d\n",
++              (bit32u)HalReceiveInfo, (bit32u)HalReceiveInfo->Eop, FragCount,i);
++            osfuncSioFlush();
++
++            return(EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_CORRUPT_RCB_CHAIN);
++           }
++
++         /* size = ((RcbSize+15) & ~15) + 15;*/                      /*-3.01b*/
++         /*size = RcbSize + 15;*/                                               /* -GSG 030421 */
++         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(RcbSize,0,
++                             0xF,HalDev->ChData[Ch].OsSetup,
++                             (void *)TempRcb,
++                             (void *)&TempRcb->OsInfo,
++                             (void *) HalDev->OsDev);
++         if (!pBuf)
++           {
++            /* malloc failed, add this RCB to Needs Buffer List */
++            TempRcb->FragCount = 1;                                             /*MJH+030417*/
++            (HAL_RCB *)TempRcb->Eop = TempRcb;                                  /* GSG +030430 */
++
++            if(HalDev->NeedsCount < MAX_NEEDS)                                  /* +MJH 030410 */
++              {                                                                 /* +MJH 030410 */
++               HalDev->Needs[HalDev->NeedsCount] = (HAL_RECEIVEINFO *) TempRcb; /* +MJH 030410 */
++               HalDev->NeedsCount++;                                            /* +MJH 030410 */
++               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_NEEDS_BUFFER);         /* ~MJH 030417 */
++              }                                                                 /* +MJH 030410 */
++             else                                                               /* +MJH 030410 */
++               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_DROPPED);              /* ~MJH 030417 */
++
++            /* requeue any previous RCB's that were ready to go before this one */
++            if (GoodCount > 0)                                                  /* +GSG 030421 */
++              {                                                                 /* +GSG 030421 */
++               LastGoodRcb->HNext=0;                                            /* +GSG 030430 */
++               LastGoodRcb->Next=0;                                             /* +GSG 030430 */
++               osfuncDataCacheHitWriteback((void *)LastGoodRcb, 16);            /* +GSG 030430 */
++
++               AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);   /* +GSG 030421 */
++               GoodCount = 0;                                                   /* +GSG 030421 */
++              }                                                                 /* +GSG 030421 */
++
++            CurrHeadRcb = TempRcb->Next;                                        /* +GSG 030421 */
++           }
++          else                                                                  /* +GSG 030421 */
++           {                                                                    /* +GSG 030421 */
++            /* malloc succeeded, requeue the RCB to the hardware */
++            TempRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
++            TempRcb->DatPtr=pBuf;
++            /* Emerald fix 10/29 */
++            osfuncDataCacheHitWriteback((void *)TempRcb, 16);
++
++            /* i store the last good RCB in case the malloc fails for the
++               next fragment.  This ensures that I can go ahead and return
++               a partial chain of RCB's to the hardware */
++            LastGoodRcb = TempRcb;                                              /* +GSG 030421 */
++            GoodCount++;                                                        /* +GSG 030421 */
++           }                                                                    /* +GSG 030421 */
++         TempRcb = TempRcb->Next;
++        } /*  end of Frag loop */
++      /* if there any good RCB's to requeue, do so here */
++      if (GoodCount > 0)                                                        /* +GSG 030421 */
++        {
++         AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);          /* +GSG 030421 */
++        }
++      return(rc);                                                               /* ~GSG 030421 */
++     }
++   else
++     {
++      /*  Not Stripping */
++      /* Emerald */
++      /* Write Back SOP and last RCB */
++      osfuncDataCacheHitWriteback((void *)HalReceiveInfo, 16);
++
++      if (FragCount > 1)
++        {
++         osfuncDataCacheHitWriteback((void *)LastRcb, 16);
++        }
++      /* if not stripping buffers, always add to queue */
++      AddToRxQueue(HalDev, HalReceiveInfo, LastRcb, FragCount, Ch); /*MJH~030520*/
++     }
++
++   return(EC_NO_ERRORS);
++  }
++
++/* +MJH 030410
++   Trys to liberate an RCB until liberation fails.
++   Note: If liberation fails then RxReturn will re-add the RCB to the
++         Needs list.
++*/
++static void NeedsCheck(HAL_DEVICE *HalDev)
++{
++    HAL_RECEIVEINFO* HalRcb;
++    int rc;
++    HalDev->OsFunc->CriticalOn();
++    while(HalDev->NeedsCount)
++      {
++      HalDev->NeedsCount--;
++      HalRcb = HalDev->Needs[HalDev->NeedsCount];
++      rc =  halRxReturn(HalRcb, 1);
++      /* short circuit if RxReturn starts to fail */
++      if (rc != 0)
++        break;
++      }
++    HalDev->OsFunc->CriticalOff();
++}
++
++/*
++ *  This function allocates transmit buffer descriptors (internal CPHAL function).
++ *  It creates a high priority transmit queue by default for a single Tx
++ *  channel.  If QoS is enabled for the given CPHAL device, this function
++ *  will also allocate a low priority transmit queue.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
++ *  @param   Ch       Channel number.
++ *
++ *  @return  0 OK, Non-Zero Not OK
++ */
++static int InitTcb(HAL_DEVICE *HalDev, int Ch)
++  {
++   int i, Num = HalDev->ChData[Ch].TxNumBuffers;
++   HAL_TCB *pTcb=0;
++   char *AllTcb;
++   int  tcbSize, Queue;
++   int SizeMalloc;
++
++   tcbSize = (sizeof(HAL_TCB)+0xf)&~0xf;
++   SizeMalloc = (tcbSize*Num)+0xf;
++
++   for (Queue=0; Queue < HalDev->ChData[Ch].TxNumQueues; Queue++)
++     {
++      if (HalDev->TcbStart[Ch][Queue] == 0)
++        {
++
++         /* malloc all TCBs at once */
++         AllTcb = (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
++         if (!AllTcb)
++           {
++            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_TCB_MALLOC_FAILED);
++           }
++
++         HalDev->OsFunc->Memset(AllTcb, 0, SizeMalloc);
++
++         /* keep this address for freeing later */
++         HalDev->TcbStart[Ch][Queue] = AllTcb;
++        }
++       else
++        {
++         /* if the memory has already been allocated, simply reuse it! */
++         AllTcb = HalDev->TcbStart[Ch][Queue];
++        }
++
++      /* align to cache line */
++      AllTcb = (char *)(((bit32u)AllTcb + 0xf) &~ 0xf); /*PITS #143  MJH~030522*/
++
++      /* default High priority transmit queue */
++      HalDev->TcbPool[Ch][Queue]=0;
++      for(i=0;i<Num;i++)
++        {
++         /*pTcb=(HAL_TCB *) OsFunc->MallocDmaXfer(sizeof(HAL_TCB),0,0xffffffff); */
++         pTcb= (HAL_TCB *)(AllTcb + (i*tcbSize));
++         pTcb->mode=0;
++         pTcb->BufPtr=0;
++         pTcb->Next=HalDev->TcbPool[Ch][Queue];
++         pTcb->Off_BLen=0;
++         HalDev->TcbPool[Ch][Queue]=pTcb;
++        }
++      /*HalDev->TcbEnd = pTcb;*/
++     }
++
++   return(EC_NO_ERRORS);
++  }
++
++/*
++ *  This function allocates receive buffer descriptors (internal CPHAL function).
++ *  After allocation, the function 'queues' (gives to the hardware) the newly
++ *  created receive buffers to enable packet reception.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
++ *  @param   Ch    Channel number.
++ *
++ *  @return  0 OK, Non-Zero Not OK
++ */
++static int InitRcb(HAL_DEVICE *HalDev, int Ch)
++  {
++   int i, Num = HalDev->ChData[Ch].RxNumBuffers;
++   int Size = HalDev->ChData[Ch].RxBufSize;
++   HAL_RCB *pRcb;
++   char *pBuf;
++   char *AllRcb;
++   int  rcbSize;
++   int  DoMalloc = 0;
++   int SizeMalloc;
++   int MallocSize;
++
++   rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;
++   SizeMalloc = (rcbSize*Num)+0xf;
++
++   if (HalDev->RcbStart[Ch] == 0)
++     {
++      DoMalloc = 1;
++
++      /* malloc all RCBs at once */
++      AllRcb= (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
++      if (!AllRcb)
++        {
++         return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RCB_MALLOC_FAILED);
++        }
++
++      HalDev->OsFunc->Memset(AllRcb, 0, SizeMalloc);
++
++      /* keep this address for freeing later */
++      HalDev->RcbStart[Ch] = AllRcb;
++     }
++    else
++     {
++      /* if the memory has already been allocated, simply reuse it! */
++      AllRcb = HalDev->RcbStart[Ch];
++     }
++
++   /* align to cache line */
++   AllRcb = (char *)(((bit32u)AllRcb + 0xf)&~0xf);  /*PITS #143  MJH~030522*/
++
++   HalDev->RcbPool[Ch]=0;
++   for(i=0;i<Num;i++)
++     {
++      pRcb = (HAL_RCB *)(AllRcb + (i*rcbSize));
++
++      if (DoMalloc == 1)
++        {
++
++         MallocSize = Size;                                       /*~3.01 */
++         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(MallocSize,0,0xF,HalDev->ChData[Ch].OsSetup, (void *)pRcb, (void *)&pRcb->OsInfo, (void *) HalDev->OsDev);
++         if(!pBuf)
++             {
++            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RX_BUFFER_MALLOC_FAILED);
++             }
++           /* -RC3.01 pBuf = (char *)(((bit32u)pBuf+0xF) & ~0xF); */
++         pRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
++         pRcb->DatPtr=pBuf;
++         /*pRcb->BufSize=Size;*/
++        }
++      pRcb->mode=0;
++      pRcb->Ch=Ch;
++      pRcb->Next=(void *)HalDev->RcbPool[Ch];
++      pRcb->Off_BLen=0;
++      pRcb->HalDev = HalDev;
++      HalDev->RcbPool[Ch]=pRcb;
++     }
++
++   /* Give all of the Rx buffers to hardware */
++
++   while(HalDev->RcbPool[Ch])
++     {
++      pRcb=HalDev->RcbPool[Ch];
++      HalDev->RcbPool[Ch]=pRcb->Next;
++      pRcb->Eop=(void*)pRcb;
++      pRcb->FragCount=1;
++      halRxReturn((HAL_RECEIVEINFO *)pRcb, 0);
++     }
++
++   return(EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function transmits the data in FragList using available transmit
++ *  buffer descriptors.  More information on the use of the Mode parameter
++ *  is available in the module-specific appendices.  Note:  The OS should
++ *  not call Send() for a channel that has been requested to be torndown.
++ *
++ *  @param   HalDev      CPHAL module instance. (set by cphalInitModule())
++ *  @param   FragList    Fragment List structure.
++ *  @param   FragCount   Number of fragments in FragList.
++ *  @param   PacketSize  Number of bytes to transmit.
++ *  @param   OsSendInfo  OS Send Information structure. <BR>
++ *  @param   Mode        32-bit value with the following bit fields: <BR>
++ *                       31-16: Mode  (used for module specific data). <BR>
++ *                       15-08: Queue (transmit queue to send on). <BR>
++ *                       07-00: Channel (channel number to send on).
++ *
++ *  @return  EC_NO_ERRORS (ok). <BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           @ref EC_VAL_NOT_LINKED "EC_VAL_NOT_LINKED"<BR>
++ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
++ *           @ref EC_VAL_OUT_OF_TCBS "EC_VAL_OUT_OF_TCBS"<BR>
++ *           @ref EC_VAL_NO_TCBS "EC_VAL_NO_TCBS"<BR>
++ */
++static int halSend(HAL_DEVICE *HalDev,FRAGLIST *FragList,
++                      int FragCount,int PacketSize, OS_SENDINFO *OsSendInfo,
++                      bit32u Mode)
++  {
++  HAL_TCB *tcb_ptr, *head;
++  int i;
++  bit32u base = HalDev->dev_base;
++  int rc = EC_NO_ERRORS;
++  int Ch = Mode & 0xFF;
++  int Queue = (Mode>>8)&0xFF;
++
++  int WaitFlag = (Mode>>30)&1; /* This is for AAL5 testing only */                     /* ~GSG 030508 */
++  int Offset = (FragList[0].len >> 16);
++  int PktType = (Mode>>16)&3; /* 0=AAL5, 1=Null AAL, 2=OAM, 3=Transparent */           /* +GSG 030508 */
++  int AtmHeaderInData = (Mode>>31)&1;                                                 /* +GSG 030508 */
++  int FragIndex = 0;
++
++  if (HalDev->State != enOpened)
++     return(EC_CPPI|EC_FUNC_SEND|EC_VAL_INVALID_STATE);
++
++  if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)                    /*MJH~030611*/ /*PITS 148*/
++    return(EC_AAL5 |EC_FUNC_SEND|EC_VAL_INVALID_CH);              /*+GSG 030303*/
++
++  HalDev->OsFunc->CriticalOn();
++
++  tcb_ptr = head = HalDev->TcbPool[Ch][Queue];
++
++  if (tcb_ptr)
++    {
++
++     /* these two TCB words are only valid on SOP */
++     if (AtmHeaderInData == 1)
++       {
++        tcb_ptr->AtmHeader = 0;  /* bug fix for transparent mode PTI problem */
++        /* Expect AtmHeader in the data */
++        tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 24;
++        tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 16;
++        tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 8;
++        tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++);
++
++        /* decrement data buffer length accordingly */
++        FragList[FragIndex].len -= ATM_HEADER_SIZE;
++
++        /* if the first fragment was ATM Header only, go to next fragment for loop */
++        if (FragList[FragIndex].len == 0)
++          FragIndex++;
++
++        /* No CPCS_UU/CPI if not AAL5 */
++        tcb_ptr->Word5 = ((PktType & 0x3)<<16);
++       }
++      else
++       {
++        /* calculate AtmHeader from fields */
++        tcb_ptr->AtmHeader = atmheader(HalDev->ChData[Ch].Gfc, /* ~GSG 030306 */
++          HalDev->ChData[Ch].Vpi, HalDev->ChData[Ch].Vci,
++          HalDev->ChData[Ch].Pti, HalDev->ChData[Ch].Clp);
++
++        tcb_ptr->Word5 = HalDev->ChData[Ch].CpcsUU | ((HalDev->ChData[Ch].PktType &0x3)<<16);
++       }
++
++     for (i=FragIndex; i<FragCount; i++)
++
++       {
++        /* Setup Tx mode and size */
++        tcb_ptr->HNext    = VirtToPhys((bit32 *)tcb_ptr->Next) - HalDev->offset;
++        tcb_ptr->Off_BLen = FragList[i].len;
++
++        if (i==0)
++          tcb_ptr->Off_BLen |= (Offset << 16);
++
++        tcb_ptr->mode     = 0;  /* MUST clear this for each frag !!! */
++        tcb_ptr->BufPtr   = VirtToPhys((bit32 *)FragList[i].data) -
++          HalDev->offset;
++
++        /* first fragment */
++        if (i == 0)
++          {
++           tcb_ptr->mode |= CB_SOF_BIT;
++
++          }
++
++        tcb_ptr->mode |= (PacketSize | CB_OWNERSHIP_BIT);
++        tcb_ptr->OsInfo = OsSendInfo;
++
++        if (i == (FragCount - 1))
++          {
++           /* last fragment */
++           tcb_ptr->mode |= CB_EOF_BIT;
++
++           /* since this is the last fragment, set the TcbPool pointer before
++              nulling out the Next pointers */
++
++           HalDev->TcbPool[Ch][Queue] = tcb_ptr->Next;
++
++           tcb_ptr->Next = 0;
++           tcb_ptr->HNext = 0;
++
++           /* In the Tx Interrupt handler, we will need to know which TCB is EOP,
++              so we can save that information in the SOP */
++           head->Eop = tcb_ptr;
++
++           /* Emerald fix 10/29 */
++       osfuncDataCacheHitWriteback((void *)tcb_ptr, 16);
++
++       osfuncDataCacheHitWriteback((void *)((bit32u)tcb_ptr + 16), 16);
++
++          }
++         else
++          {
++       /* Emerald fix 10/29 */
++       osfuncDataCacheHitWriteback((void *)tcb_ptr, 16);
++
++       osfuncDataCacheHitWriteback((void *)((bit32u)tcb_ptr + 16), 16);
++
++           tcb_ptr = tcb_ptr->Next;  /* what about the end of TCB list?? */
++
++           if (tcb_ptr == 0)
++             {
++          rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_OUT_OF_TCBS;
++              goto ExitSend;
++             }
++      }
++       } /* for */
++
++     /* put it on the high priority queue */
++     if (HalDev->TxActQueueHead[Ch][Queue] == 0)
++       {
++        HalDev->TxActQueueHead[Ch][Queue]=head;
++        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
++/*+GSG 030303*//*+GSG 030303*/
++        if (!HalDev->TxActive[Ch][Queue])
++          {
++
++           if (!WaitFlag)
++         {
++
++          /* write CPPI TX HDP */
++              (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( Queue )))  = VirtToPhys(head)  - HalDev->offset;
++              HalDev->TxActive[Ch][Queue]=TRUE;
++
++         }
++
++          }
++       }
++      else
++       {
++        HalDev->TxActQueueTail[Ch][Queue]->Next=head;
++        /* Emerald fix 10/29 */
++        *((bit32u *) VirtToVirtNoCache(&HalDev->TxActQueueTail[Ch][Queue]->HNext))=VirtToPhys(head)  - HalDev->offset;
++        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
++/*+GSG 030303*//*+GSG 030303*/
++       }
++     rc = EC_NO_ERRORS;
++     goto ExitSend;
++    } /* if (tcb_ptr) */
++   else
++    {
++     rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NO_TCBS;
++     goto ExitSend;
++    }
++ExitSend:
++
++    HalDev->OsFunc->CriticalOff();
++    return(rc);
++  }
++
++/*
++ *  This function processes receive interrupts.  It traverses the receive
++ *  buffer queue, extracting the data and passing it to the upper layer software via
++ *  osReceive().  It handles all error conditions and fragments without valid data by
++ *  immediately returning the RCB's to the RCB pool.
++ *
++ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
++ *  @param   Ch       Channel Number.
++ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
++ *
++ *  @return  0 if OK, non-zero otherwise.
++ */
++static int RxInt(HAL_DEVICE *HalDev, int Ch, int *MoreWork)
++  {
++  HAL_RCB *CurrentRcb, *LastRcb=0, *SopRcb, *EofRcb, *EopRcb;
++  bit32u RxBufStatus,PacketsServiced, RxPktLen = 0, RxSopStatus,
++    FrmFrags, TotalFrags, CurrDmaLen, DmaLen, FrmLen;
++  int base = HalDev->dev_base, Ret;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++  int RxServiceMax = HalDev->ChData[Ch].RxServiceMax;
++  int FragIndex; /* +GSG 030508 */
++  int EarlyReturn = 0; /* +GSG 030521 */
++
++  bit32u PktType, ExpDmaSize, Cells;
++  int PassHeader=0;
++
++  int mode;
++
++  bit32u SopOffset;
++
++  if(HalDev->NeedsCount) /* +MJH 030410 */
++    NeedsCheck(HalDev);  /* +MJH 030410 */
++
++  /* Handle case of teardown interrupt */
++  if (HalDev->RxTeardownPending[Ch] != 0)
++    {
++     Ret = RxTeardownInt(HalDev, Ch);
++     if (Ret == 0)
++       {                                                              /*+GSG 030303*/
++        *MoreWork = 0; /* bug fix 1/6 */                              /*+GSG 030303*/
++        return (EC_NO_ERRORS);
++       }                                                              /*+GSG 030303*/
++    }
++
++  CurrentRcb=HalDev->RxActQueueHead[Ch];
++
++  osfuncDataCacheHitInvalidate((void*)CurrentRcb, 16);
++
++  RxBufStatus=CurrentRcb->mode;
++
++  /* I think I need to do this to ensure that i read UuCpi properly,
++     which is on the second cache line of the Rcb */
++  osfuncDataCacheHitInvalidate((void*)((bit32u)CurrentRcb+16), 16);
++
++  PacketsServiced=0;
++  HalDev->InRxInt[Ch]=TRUE;
++
++  while((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)&&
++    (PacketsServiced<RxServiceMax)) /* ~GSG 030307 */
++    {
++
++    PacketsServiced++; /* ~GSG 030307 */
++    SopRcb=CurrentRcb;
++    RxSopStatus=RxBufStatus;
++
++    RxPktLen = RxSopStatus&CB_SIZE_MASK;
++    /* Not sure what MAC needs to do for next block */
++
++    PktType=((SopRcb->UuCpi & 0x00030000) >> 16);                           /* GSG ~030508 */
++    /* Calculate the expected DMA length */
++    if (RxPktLen != 0)
++      {
++       Cells=RxPktLen/48;
++       if ((RxPktLen%48) > 40)
++         Cells++;
++       if (PktType == PKT_TYPE_AAL5)                                        /* ~GSG 030508 */
++         Cells++;
++       ExpDmaSize=Cells*48;
++      }
++     else
++      {
++       ExpDmaSize=0;
++      }
++
++    SopOffset=(SopRcb->Off_BLen&CB_OFFSET_MASK)>>16;
++
++    CurrDmaLen=0;
++    FrmFrags=0;
++    TotalFrags=0;
++    FragIndex=0;
++    FrmLen=0;
++    EofRcb=0;
++
++/* +GSG 030508 */
++    if ((PktType == PKT_TYPE_OAM) || (PktType == PKT_TYPE_TRANS))            /* +GSG 030508 */
++      {                                                                      /* +GSG 030508 */
++       /* first frag is ATM Header */                                        /* +GSG 030508 */
++       PassHeader = 1;                                                       /* +GSG 030508 */
++       HalDev->fraglist[FragIndex].data = (void *)&SopRcb->AtmHeader;        /* +GSG 030508 */
++       HalDev->fraglist[FragIndex].len = 4;                                  /* +GSG 030508 */
++       HalDev->fraglist[FragIndex].OsInfo = SopRcb->OsInfo;                  /* +GSG 030701 */
++       FragIndex++;                                                          /* +GSG 030508 */
++      }                                                                      /* +GSG 030508 */
++/* +GSG 030508 */
++
++    do
++      {
++
++      DmaLen=CurrentRcb->Off_BLen&CB_SIZE_MASK;
++
++      CurrDmaLen+=DmaLen;
++      FrmLen+=DmaLen;
++      TotalFrags++;
++      if (!EofRcb)
++        {
++        HalDev->fraglist[FragIndex].data=((char *)CurrentRcb->DatPtr);       /* ~GSG 030508 */
++
++        HalDev->fraglist[FragIndex].data+=((FrmFrags==0)?SopOffset:0);       /* ~GSG 030508 */
++
++        HalDev->fraglist[FragIndex].len=DmaLen;                              /* ~GSG 030508 */
++
++        /* GSG 12/9 */
++        HalDev->fraglist[FragIndex].OsInfo = CurrentRcb->OsInfo;             /* ~GSG 030508 */
++
++        /* Upper layer must do the data invalidate */
++
++        FrmFrags++;
++        FragIndex++;                                                         /* ~GSG 030508 */
++        if (FrmLen>=RxPktLen)
++          EofRcb=CurrentRcb;
++        }
++      LastRcb=CurrentRcb;
++      CurrentRcb=LastRcb->Next;
++      if (CurrentRcb)
++        {
++         osfuncDataCacheHitInvalidate((void*)CurrentRcb,16);
++         /*         RxBufStatus=CurrentRcb->mode; */ /*DRB~030522*/
++        }
++      }while(((LastRcb->mode&CB_EOF_BIT)==0)&&(CurrentRcb));
++
++    /* New location for interrupt acknowledge */
++    /* Write the completion pointer */
++    (*(pRX_CPPI_COMP_PTR( base )+( Ch *64)))  = VirtToPhys(LastRcb) - HalDev->offset;
++
++    EopRcb=LastRcb;
++    HalDev->RxActQueueHead[Ch]=CurrentRcb;
++    HalDev->RxActQueueCount[Ch]-=TotalFrags;
++
++    if (LastRcb->mode&CB_EOQ_BIT)
++      {
++       if (CurrentRcb)
++         {
++
++          HalDev->Stats.RxMisQCnt[Ch]++;
++
++          (*(pRX_DMA_STATE_WORD_1( base )+( Ch *64)))  = LastRcb->HNext;
++         }
++        else
++         {
++
++          /* Rx EOQ */
++          HalDev->Stats.RxMisQCnt[Ch]++;
++
++          HalDev->RxActive[Ch]=FALSE;
++         }
++      }
++
++    EopRcb->Next=0;
++
++    /* setup SopRcb for the packet */
++    SopRcb->Eop=(void*)EopRcb;
++    SopRcb->FragCount=TotalFrags;
++
++    if ((ExpDmaSize!=CurrDmaLen)||(RxSopStatus&RX_ERROR_MASK))
++      {
++       /* check for Rx errors (only valid on SOP) */
++       if (RxSopStatus & RX_ERROR_MASK)
++         {
++          if (RxSopStatus & CRC_ERROR_MASK)
++            HalDev->Stats.CrcErrors[Ch]++;
++
++          if (RxSopStatus & LENGTH_ERROR_MASK)
++            HalDev->Stats.LenErrors[Ch]++;
++
++          if (RxSopStatus & ABORT_ERROR_MASK)
++            HalDev->Stats.AbortErrors[Ch]++;
++
++          if (RxSopStatus & STARV_ERROR_MASK)
++            HalDev->Stats.StarvErrors[Ch]++;
++         }
++        else
++         {
++          HalDev->Stats.DmaLenErrors[Ch]++; /* different type of length error */
++         }
++
++       EarlyReturn = 1;
++      }
++
++    /* do not pass up the packet if we're out of RCB's (or have an errored packet)*/
++    if ((CurrentRcb == 0) || (EarlyReturn == 1))
++      {
++       halRxReturn((HAL_RECEIVEINFO *)SopRcb,0);
++      }
++     else
++      {
++
++      if (EopRcb!=EofRcb)
++        {
++         HAL_RCB *FirstEmptyRcb;
++
++         FirstEmptyRcb = EofRcb->Next;
++         FirstEmptyRcb->Eop = (void*)EopRcb;
++         FirstEmptyRcb->FragCount = TotalFrags-FrmFrags;
++
++         halRxReturn((HAL_RECEIVEINFO *)FirstEmptyRcb,0);
++         SopRcb->Eop=(void*)EofRcb;
++         SopRcb->FragCount=FrmFrags;
++         EofRcb->Next=0;  /* Optional */
++        }
++
++      mode = Ch | (PktType << 16) | (PassHeader << 31);   /* ~GSG 030508 */
++
++      OsFunc->Receive(HalDev->OsDev,HalDev->fraglist,FragIndex,RxPktLen,             /* ~GSG 030508 */
++           (HAL_RECEIVEINFO *)SopRcb,mode);
++      } /* else */
++    
++    if (CurrentRcb)                                                                  /*MJH+030522*/
++      {
++       RxBufStatus=CurrentRcb->mode;
++      }
++    } /* while */
++
++  if ((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)) /*~GSG 030307*/
++    {
++     *MoreWork = 1;
++    }
++   else
++    {
++     *MoreWork = 0;
++    }
++
++  if (PacketsServiced != 0)
++    {
++      /* REMOVED when removing InRxInt */
++     if ((!HalDev->RxActive[Ch]) && (HalDev->RxActQueueCount[Ch]))
++       {
++        (*(pRX_DMA_STATE_WORD_1( base )+( Ch *64)))  = VirtToPhys(HalDev->RxActQueueHead[Ch]);
++    HalDev->RxActive[Ch]=TRUE;
++       }
++    }
++
++  HalDev->InRxInt[Ch]=FALSE;
++
++  /* update stats */
++  HalDev->Stats.RxPacketsServiced[Ch] += PacketsServiced;
++  HalDev->Stats.RxTotal += PacketsServiced;
++  if (HalDev->Stats.RxMaxServiced < PacketsServiced)
++    HalDev->Stats.RxMaxServiced = PacketsServiced;
++
++  return (EC_NO_ERRORS);
++  }
++
++/*
++ *  This function processes transmit interrupts.  It traverses the
++ *  transmit buffer queue, detecting sent data buffers and notifying the upper
++ *  layer software via osSendComplete().  (for SAR, i originally had this split
++ *  into two functions, one for each queue, but joined them on 8/8/02)
++ *
++ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
++ *  @param   Queue    Queue number to service (always 0 for MAC, Choose 1 for SAR to service low priority queue)
++ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
++ *
++ *  @return  0 if OK, non-zero otherwise.
++ */
++static int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork)
++  {
++  HAL_TCB *CurrentTcb,*LastTcbProcessed,*FirstTcbProcessed;
++  int PacketsServiced;
++  bit32u TxFrameStatus;
++  int base = HalDev->dev_base, Ret;
++  int TxServiceMax = HalDev->ChData[Ch].TxServiceMax;
++  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
++
++  int OtherQueue = Queue^1;
++
++/*+GSG 030303*//*+GSG 030303*/
++
++  /* Handle case of teardown interrupt.  This must be checked at
++     the top of the function rather than the bottom, because
++     the normal data processing can wipe out the completion
++     pointer which is used to determine teardown complete. */
++  if (HalDev->TxTeardownPending[Ch] != 0)
++    {
++     Ret = TxTeardownInt(HalDev, Ch, Queue);
++     if (Ret == 0)
++       {                                                              /*+GSG 030303*/
++        *MoreWork = 0; /* bug fix 1/6 */                              /*+GSG 030303*/
++        return (EC_NO_ERRORS);
++       }                                                              /*+GSG 030303*/
++    }
++
++  CurrentTcb = HalDev->TxActQueueHead[Ch][Queue];
++  FirstTcbProcessed=CurrentTcb;
++
++  if (CurrentTcb==0)
++    {
++     /* I saw this error a couple of times when multi-channels were added */
++     dbgPrintf("[cppi TxInt()]TxH int with no TCB in queue!\n");
++     dbgPrintf("              Ch=%d, CurrentTcb = 0x%08x\n", Ch, (bit32u)CurrentTcb);
++     dbgPrintf("              HalDev = 0x%08x\n", (bit32u)HalDev);
++     osfuncSioFlush();
++     return(EC_CPPI|EC_FUNC_TXINT|EC_VAL_NULL_TCB);
++    }
++
++  osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
++  TxFrameStatus=CurrentTcb->mode;
++  PacketsServiced=0;
++
++  /* should the ownership bit check be inside of the loop?? could make it a
++     while-do loop and take this check away */
++  if ((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
++    {
++    OsFunc->CriticalOn(); /* +GSG 030307 */
++    do
++      {
++      /* Pop TCB(s) for packet from the stack */
++      LastTcbProcessed=CurrentTcb->Eop;
++
++      /* new location for acknowledge */
++      /* Write the completion pointer */
++      (*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue )))  = VirtToPhys(LastTcbProcessed);
++
++      HalDev->TxActQueueHead[Ch][Queue] = LastTcbProcessed->Next;
++
++/*+GSG 030303*//*+GSG 030303*/
++
++      osfuncDataCacheHitInvalidate((void *)LastTcbProcessed, 16);
++
++      if (LastTcbProcessed->mode&CB_EOQ_BIT)
++        {
++        if (LastTcbProcessed->Next)
++          {
++       /* Misqueued packet */
++
++           HalDev->Stats.TxMisQCnt[Ch][Queue]++;
++
++           (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( Queue )))  = LastTcbProcessed->HNext;
++          }
++         else
++          {
++       /* Tx End of Queue */
++
++       HalDev->Stats.TxEOQCnt[Ch][Queue]++;
++
++       HalDev->TxActive[Ch][Queue]=FALSE;
++          }
++        }
++
++      OsFunc->SendComplete(CurrentTcb->OsInfo);
++
++      /* Push Tcb(s) back onto the stack */
++      CurrentTcb = LastTcbProcessed->Next;
++
++      LastTcbProcessed->Next=HalDev->TcbPool[Ch][Queue];
++
++      HalDev->TcbPool[Ch][Queue]=FirstTcbProcessed;
++
++      PacketsServiced++;
++
++      TxFrameStatus=CB_OWNERSHIP_BIT;
++      /* set the first(SOP) pointer for the next packet */
++      FirstTcbProcessed = CurrentTcb;
++      if (CurrentTcb)
++        {
++     osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
++         TxFrameStatus=CurrentTcb->mode;
++        }
++
++      }while(((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
++             &&(PacketsServiced<TxServiceMax));
++
++    /* this fixes the SAR TurboDSL hardware bug (multiple queue failure) */
++    if (HalDev->TxActive[Ch][OtherQueue])
++      if (HalDev->TxActQueueHead[Ch][OtherQueue])
++        if ((*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( OtherQueue )))  == 0)
++          {
++           osfuncDataCacheHitInvalidate(HalDev->TxActQueueHead[Ch][OtherQueue],16);
++           if ((HalDev->TxActQueueHead[Ch][OtherQueue]->mode) & CB_OWNERSHIP_BIT)
++             { 
++              HalDev->TurboDslErrors++;
++              (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( OtherQueue )))  = 
++                VirtToPhys(HalDev->TxActQueueHead[Ch][OtherQueue]);
++             }
++          }
++
++    OsFunc->CriticalOff(); /* +GSG 030307 */
++    if (((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
++             &&(PacketsServiced==TxServiceMax))
++      {
++       *MoreWork = 1;
++      }
++     else
++      {
++       *MoreWork = 0;
++      }
++    }
++
++  /* update stats */
++  HalDev->Stats.TxPacketsServiced[Ch][Queue] += PacketsServiced;
++  HalDev->Stats.TxTotal += PacketsServiced;
++  if (HalDev->Stats.TxMaxServiced[Ch][Queue] < PacketsServiced)
++    HalDev->Stats.TxMaxServiced[Ch][Queue] = PacketsServiced;
++
++  return(EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function performs a teardown for the given channel.  The value of the
++ *  Mode parameter controls the operation of the function, as documented below.
++ *
++ *  Note: If bit 3 of Mode is set, this call is blocking, and will not return
++ *  until the teardown interrupt has occurred and been processed. While waiting
++ *  for a blocking teardown to complete, ChannelTeardown() will signal the OS
++ *  (via Control(.."Sleep"..)) to allow the OS to perform other tasks if
++ *  necessary.  If and only if bit 3 of Mode is clear, the CPHAL will call the
++ *  OS TeardownComplete() function to indicate that the teardown has completed.
++ *
++ *  @param   HalDev  CPHAL module instance. (set by xxxInitModule())
++ *  @param   Ch      Channel number.
++ *  @param   Mode    Bit 0 (LSB): Perform Tx teardown (if set).<BR>
++ *                   Bit 1: Perform Rx teardown (if set). <BR>
++ *                   Bit 2: If set, perform full teardown (free buffers/descriptors).
++ *                          If clear, perform partial teardown (keep buffers). <BR>
++ *                   Bit 3 (MSB): If set, call is blocking.
++ *                            If clear, call is non-blocking.
++ *
++ *  @return  EC_NO_ERRORS (ok). <BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
++ *           @ref EC_VAL_TX_TEARDOWN_ALREADY_PEND "EC_VAL_TX_TEARDOWN_ALREADY_PEND"<BR>
++ *           @ref EC_VAL_RX_TEARDOWN_ALREADY_PEND "EC_VAL_RX_TEARDOWN_ALREADY_PEND"<BR>
++ *           @ref EC_VAL_TX_CH_ALREADY_TORNDOWN "EC_VAL_TX_CH_ALREADY_TORNDOWN"<BR>
++ *           @ref EC_VAL_RX_CH_ALREADY_TORNDOWN "EC_VAL_RX_CH_ALREADY_TORNDOWN"<BR>
++ *           @ref EC_VAL_TX_TEARDOWN_TIMEOUT "EC_VAL_TX_TEARDOWN_TIMEOUT"<BR>
++ *           @ref EC_VAL_RX_TEARDOWN_TIMEOUT "EC_VAL_RX_TEARDOWN_TIMEOUT"<BR>
++ *           @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
++ */
++static int halChannelTeardown(HAL_DEVICE *HalDev, int Ch, bit32 Mode)
++  {
++   int DoTx, DoRx, Sleep=2048, timeout=0;                         /*MJH~030306*/
++   bit32u base = HalDev->dev_base;
++
++/* Set the module, used for error returns */
++
++   int Ret;
++
++   /* AAL5 only supports tearing down both sides at once (currently)*/
++   Mode = (Mode | TX_TEARDOWN | RX_TEARDOWN);
++
++   DoTx = (Mode & TX_TEARDOWN);
++   DoRx = (Mode & RX_TEARDOWN);
++
++   if (HalDev->State < enInitialized)
++     return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_STATE);
++
++   if ((Ch < 0) || (Ch > MAX_AAL5_CHAN ))
++     {
++     return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
++     }
++
++   /* set teardown pending bits before performing the teardown, because they
++      will be used in the int handler (this is done for AAL5) */
++   if (DoTx)
++     {
++      if (HalDev->TxTeardownPending[Ch] != 0)
++        return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_ALREADY_PEND);
++
++      /* If a full teardown, this also means that the user must
++      setup all channels again to use them */
++      if (Mode & FULL_TEARDOWN)
++        HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
++
++      if (HalDev->State < enOpened)
++        {
++         /* if the hardware has never been opened, the channel has never actually
++         been setup in the hardware, so I just need to reset the software flag
++         and leave */
++         HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
++         return (EC_NO_ERRORS);
++    }
++       else
++    {
++         if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)
++       {
++            return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_CH_ALREADY_TORNDOWN);
++       }
++
++         /* set teardown flag */
++         HalDev->TxTeardownPending[Ch] = Mode;
++    }
++     }
++
++   if (DoRx)
++     {
++      if (HalDev->RxTeardownPending[Ch] != 0)
++        return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_ALREADY_PEND);
++
++      if (Mode & FULL_TEARDOWN)
++        HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
++
++      if (HalDev->State < enOpened)
++        {
++         HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
++         return (EC_NO_ERRORS);
++    }
++       else
++    {
++         if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == 0)
++           return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_CH_ALREADY_TORNDOWN);
++
++         HalDev->RxTeardownPending[Ch] = Mode;
++    }
++     }
++
++   /* Perform Tx Teardown Duties */
++   if ((DoTx) && (HalDev->State == enOpened))
++     {
++      /* Request TX channel teardown */
++      (TX_CPPI_TEARDOWN_REG( base ))  = Ch;
++
++      /* wait until teardown has completed */
++      if (Mode & BLOCKING_TEARDOWN)
++        {
++     timeout = 0;
++         while (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
++       {
++            osfuncSleep(&Sleep);
++
++            timeout++;
++        if (timeout > 100000)
++          {
++               return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_TIMEOUT);
++          }
++       }
++    }
++     } /* if DoTx */
++
++   /* Perform Rx Teardown Duties */
++   if ((DoRx) && (HalDev->State == enOpened))
++     {
++
++      /* call main teardown routine for Rx */
++      Ret = HalDev->SarFunc->ChannelTeardown(HalDev->SarDev, Ch, Mode);
++      if (Ret) return (Ret);
++
++      if (Mode & BLOCKING_TEARDOWN)
++        {
++     timeout = 0;
++         while (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
++       {
++            osfuncSleep(&Sleep);
++
++            timeout++;
++        if (timeout > 100000)
++          {
++               return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_TIMEOUT);
++          }
++       }
++        }
++     } /* if DoRx */
++
++   return (EC_NO_ERRORS);
++  }
++
++/**
++ *  @ingroup CPHAL_Functions
++ *  This function closes the CPHAL module.  The module will be reset.
++ *  The Mode parameter should be used to determine the actions taken by
++ *  Close().
++ *
++ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
++ *  @param   Mode     Indicates actions to take on close.  The following integer
++ *                    values are valid: <BR>
++ *                    1:  Does not free buffer resources, init parameters remain
++ *                        intact.  User can then call Open() without calling Init()
++ *                        to attempt to reset the device and bring it back to the
++ *                        last known state.<BR>
++ *                    2:  Frees the buffer resources, but keeps init parameters.  This
++ *                        option is a more aggressive means of attempting a device reset.
++ *                    3:  Frees the buffer resources, and clears all init parameters. <BR>
++ *                        At this point, the caller would have to call to completely
++ *                        reinitialize the device (Init()) before being able to call
++ *                        Open().  Use this mode if you are shutting down the module
++ *                        and do not plan to restart.
++ *
++ *  @return  EC_NO_ERRORS (ok).<BR>
++ *           Possible Error Codes:<BR>
++ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
++ *           Any error code from halChannelTeardown().<BR>
++ */
++static int halClose(HAL_DEVICE *HalDev, bit32 Mode)
++  {
++   int Ch, Inst, Ret;
++   OS_DEVICE *TmpOsDev;
++   OS_FUNCTIONS *TmpOsFunc;
++   HAL_FUNCTIONS *TmpHalFunc;
++   char *TmpDeviceInfo;
++
++   CPSAR_FUNCTIONS *TmpSarFunc;
++   CPSAR_DEVICE *TmpSarDev;
++
++   /* Verify proper device state */
++   if (HalDev->State != enOpened)
++     return (EC_AAL5  | EC_FUNC_CLOSE|EC_VAL_INVALID_STATE);
++
++   /* Teardown all open channels */
++   for (Ch = 0; Ch <= MAX_AAL5_CHAN ; Ch++)
++     {
++      if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
++        {
++         if (Mode == 1)
++           {
++            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
++            if (Ret) return (Ret);
++           }
++          else
++           {
++            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
++            if (Ret) return (Ret);
++           }
++        }
++
++      if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
++        {
++         if (Mode == 1)
++           {
++            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
++            if (Ret) return (Ret);
++           }
++          else
++           {
++            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
++            if (Ret) return (Ret);
++           }
++        }
++     }
++
++   /* free fraglist in HalDev */
++   HalDev->OsFunc->Free(HalDev->fraglist);
++   HalDev->fraglist = 0;
++
++   /* unregister the interrupt */
++   HalDev->OsFunc->IsrUnRegister(HalDev->OsDev, HalDev->interrupt);
++
++   /* Disable the Tx CPPI DMA */
++   TX_CPPI_CTL_REG(HalDev->dev_base) = 0;
++
++   /* Disable the Rx CPPI DMA */
++   RX_CPPI_CTL_REG(HalDev->dev_base) = 0;
++
++   /* Close the SAR hardware - puts the device in reset if this module is the
++      "last one out" */
++   HalDev->SarFunc->Close(HalDev->SarDev, Mode);
++
++   /* If mode is 3, than clear the HalDev and set next state to DevFound*/
++   if (Mode == 3)
++     {
++      /* I need to keep the HalDev parameters that were setup in InitModule */
++      TmpOsDev = HalDev->OsDev;
++      TmpOsFunc = HalDev->OsFunc;
++      TmpDeviceInfo = HalDev->DeviceInfo;
++
++      TmpSarFunc = HalDev->SarFunc;
++      TmpSarDev = HalDev->SarDev;
++
++      TmpHalFunc = HalDev->HalFuncPtr;
++      Inst = HalDev->Inst;
++
++      /* Clear HalDev */
++
++      HalDev->OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
++
++      /* Restore key parameters */
++      HalDev->OsDev = TmpOsDev;
++      HalDev->OsFunc = TmpOsFunc;
++      HalDev->DeviceInfo = TmpDeviceInfo;
++
++      HalDev->SarFunc = TmpSarFunc;
++      HalDev->SarDev = TmpSarDev;
++
++      HalDev->HalFuncPtr = TmpHalFunc;
++      HalDev->Inst = Inst;
++
++      HalDev->State = enDevFound;
++     }
++    else
++     {
++      HalDev->State = enInitialized;
++     }
++
++   return(EC_NO_ERRORS);
++  }
+diff -urN linux.old/drivers/atm/sangam_atm/cpremap_cpaal5.c linux.dev/drivers/atm/sangam_atm/cpremap_cpaal5.c
+--- linux.old/drivers/atm/sangam_atm/cpremap_cpaal5.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpremap_cpaal5.c	2005-08-23 04:46:50.084845672 +0200
+@@ -0,0 +1,27 @@
++#ifndef _INC_CPREMAP_C
++#define _INC_CPREMAP_C
++
++#ifdef __ADAM2
++static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
++  {
++  asm(" cache  17, (%0)" : : "r" (ptr));
++  }
++
++static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
++  { 
++  asm(" cache  25, (%0)" : : "r" (ptr));
++  }
++
++#else
++  #define osfuncDataCacheHitInvalidate(MemPtr, Size)   HalDev->OsFunc->DataCacheHitInvalidate(MemPtr, Size)
++  #define osfuncDataCacheHitWriteback(MemPtr, Size)    HalDev->OsFunc->DataCacheHitWriteback(MemPtr, Size)
++#endif
++
++/*
++#define osfuncDataCacheHitInvalidate(ptr, Size) asm(" cache  17, (%0)" : : "r" (ptr))
++#define osfuncDataCacheHitWriteback(ptr, Size)  asm(" cache  25, (%0)" : : "r" (ptr))
++*/
++
++
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/cpremap_cpsar.c linux.dev/drivers/atm/sangam_atm/cpremap_cpsar.c
+--- linux.old/drivers/atm/sangam_atm/cpremap_cpsar.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpremap_cpsar.c	2005-08-23 04:46:50.084845672 +0200
+@@ -0,0 +1,27 @@
++#ifndef _INC_CPREMAP_C
++#define _INC_CPREMAP_C
++
++#ifdef __ADAM2
++static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
++  {
++  asm(" cache  17, (%0)" : : "r" (ptr));
++  }
++
++static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
++  { 
++  asm(" cache  25, (%0)" : : "r" (ptr));
++  }
++
++#else
++  #define osfuncDataCacheHitInvalidate(MemPtr, Size)   HalDev->OsFunc->DataCacheHitInvalidate(MemPtr, Size)
++  #define osfuncDataCacheHitWriteback(MemPtr, Size)    HalDev->OsFunc->DataCacheHitWriteback(MemPtr, Size)
++#endif
++
++/*
++#define osfuncDataCacheHitInvalidate(ptr, Size) asm(" cache  17, (%0)" : : "r" (ptr))
++#define osfuncDataCacheHitWriteback(ptr, Size)  asm(" cache  25, (%0)" : : "r" (ptr))
++*/
++
++
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/cpsar.c linux.dev/drivers/atm/sangam_atm/cpsar.c
+--- linux.old/drivers/atm/sangam_atm/cpsar.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpsar.c	2005-08-23 04:46:50.086845368 +0200
+@@ -0,0 +1,881 @@
++/**
++ *  cpsar.c
++ *
++ *  TNETDxxxx Software Support\n
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  This file contains the HAL for the CPSAR module.  In the software
++ *  architecture, the CPSAR module is used exclusively by the AAL5 and AAL2
++ *  CPHAL modules.  AAL5 and AAL2 may utilize the same CPSAR instance
++ *  simulataneously.
++ *
++ *  version
++ *      5Sep02 Greg        1.00  Original Version created.
++ */
++
++/* register files */
++#include "cp_sar_reg.h"  
++
++#define _CPHAL_CPSAR
++#define _CPHAL 
++
++#define WAIT_THRESH           200000
++#define IRAM_SIZE             1536
++#define MAX_INST              2
++
++/*  OS Data Structure definition  */
++
++typedef void OS_PRIVATE;
++typedef void OS_DEVICE;
++typedef void OS_SENDINFO;
++typedef void OS_RECEIVEINFO;
++typedef void OS_SETUP;
++
++/*  CPHAL Data Structure definitions  */
++
++typedef struct cpsar_device  CPSAR_DEVICE;
++typedef struct cpsar_device  HAL_DEVICE;
++typedef void HAL_RECEIVEINFO;
++
++#define MAX_QUEUE  2
++#define MAX_CHAN 19
++
++#include "cpcommon_cpsar.h"
++#include "cpswhal_cpsar.h"
++#include "cpsar.h"
++#include "cpcommon_cpsar.c"
++
++static CPSAR_DEVICE *CpsarDev[MAX_INST]= {0,0};
++
++/*
++ *  Returns statistics information.
++ *
++ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())  
++ *
++ *  @return 0
++ */
++static int StatsGet3(CPSAR_DEVICE *HalDev)
++  {
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]StatsGet3(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++   /*
++   dbgPrintf("CPSAR General Stats:\n");
++   DispHexStat(HalDev, "Base Address",HalDev->dev_base);
++   DispStat(HalDev, "Offset (VLYNQ)",HalDev->offset);
++   DispStat(HalDev, "Debug Level",HalDev->debug);
++   DispStat(HalDev, "Instance",HalDev->Inst);
++   DispHexStat(HalDev, "Reset Address",HalDev->ResetBase);
++   DispStat(HalDev, "Reset Bit",HalDev->ResetBit);
++   */
++   return (EC_NO_ERRORS);
++  }
++
++/* +GSG 030407 */
++static void SetOamMode(HAL_DEVICE *HalDev)
++  {
++   int Ch;
++   volatile bit32u *pTmp;
++   int OamMode = (1<<8);
++
++   /* any configuration of OamMode affects all VC's, including AAL2 */
++   for (Ch = 0; Ch < MAX_CHAN; Ch++)
++     {
++      if (Ch < 16)
++        pTmp = (pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base) + (Ch*64));
++       else
++        pTmp = (pPDSP_AAL2_RX_STATE_WORD_0(HalDev->dev_base) + ((Ch-16)*64));
++
++      if (HalDev->OamMode == 0)
++        {
++         *pTmp &=~ OamMode;
++        }
++       else
++        {
++         *pTmp |= OamMode;
++        }
++     }
++  }
++
++static int halControl(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value)
++  {
++   int KeyFound=0, ActionFound=0, rc=EC_NO_ERRORS, Ch;  /* +RC3.02*/
++   char *TmpKey = (char *)Key;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]halControl(HalDev:%08x, Key:%s, Action:%s, Value:%08x)\n", (bit32u)HalDev,
++                Key, Action, (bit32u)Value);
++      osfuncSioFlush();
++     }
++#endif  
++
++   if (HalDev->OsFunc->Strcmpi(Key, "Debug") == 0)
++     {
++      KeyFound=1; /* +RC3.02*/
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1; /* +RC3.02*/
++         HalDev->debug = *(int *)Value;
++        }
++     }
++
++   /* +GSG 030407 */
++   if (HalDev->OsFunc->Strcmpi(Key, "OamMode") == 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         HalDev->OamMode = *(int *)Value;
++
++         /* only do this if we're open */
++         if (HalDev->OpenCount > 0)
++           SetOamMode(HalDev);
++        }
++
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        {
++         ActionFound=1;
++         *(int *)Value = HalDev->OamMode;
++        }
++     }
++
++   if (HalDev->OsFunc->Strcmpi(Key, "Stats3") == 0)
++     {
++      if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
++        StatsGet3(HalDev);
++     }
++
++   /* +RC3.02  (if statement) */
++   /* Fixes PITS #98 */
++   if (HalDev->OsFunc->Strstr(Key, "PdspEnable") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         
++         /* Configure PDSP enable bit based on Value*/
++         if (*(int *)Value & 1)
++           {
++            /* enable PDSP */
++            PDSP_CTRL_REG(HalDev->dev_base) |= 0x2;
++           }
++          else
++           {
++            /* disable PDSP */
++            PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x2;
++           }
++        }
++     }
++
++   if (HalDev->OsFunc->Strstr(Key, "FwdUnkVc.") != 0)
++     {
++      KeyFound=1;
++      if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
++        {
++         ActionFound=1;
++         
++         /* extract channel number */
++         TmpKey += HalDev->OsFunc->Strlen("FwdUnkVc.");
++         Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
++
++         /* Configure forwarding of unknown VCI/VPI cells */
++         SAR_PDSP_FWD_UNK_VC_REG(HalDev->dev_base) = (((*(int*)Value)<<31) | Ch);
++        }
++     }
++
++   if (KeyFound == 0) /* +RC3.02 */
++     rc = (EC_CPSAR|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND); /* +RC3.02 */
++
++   if (ActionFound == 0) /* +RC3.02 */
++     rc = (EC_CPSAR|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND); /* +RC3.02 */
++
++   return(rc);   /* ~RC3.02 */
++  }
++
++/*
++ * This function opens the specified channel.
++ *  
++ * @param   HalDev  CPHAL module instance. (set by cphalInitModule())   
++ * @param   Ch      Channel number.
++ *
++ * @return  0 OK, Non-zero Not OK
++ */
++static int halChannelSetup(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh)
++  {
++  int i;
++  int Ch = HalCh->Channel;
++  int PdspChBlock = Ch;
++  int PdspBlockOffset = 0;
++  volatile bit32u *pTmp;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]halChannelSetup(HalDev:%08x, HalCh:%08x)\n", (bit32u)HalDev,
++                (bit32u)HalCh);
++      osfuncSioFlush();
++     }
++#endif
++
++  /* Figure out the correct offset from the start of the PDSP
++     Scratchpad RAM (starting at 0x8050 in the SAR) */
++  if (Ch > 15)
++    {
++     /* this is an AAL2 channel, which are channels 16-18 */
++     PdspChBlock = Ch - 16;  
++     /* Get the offset to the AAL2 portion of the block (in words) */
++     PdspBlockOffset = NUM_PDSP_AAL5_STATE_WORDS + (PdspChBlock*64);
++     /* Clear PDSP State RAM */
++     /*pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
++     for (i=0; i<NUM_PDSP_AAL2_STATE_WORDS; i++)
++     *pTmp++ = 0;*/
++    }
++   else
++    {
++     /* Get the offset to the AAL5 portion of the block (in words) */
++     PdspBlockOffset = (PdspChBlock*64);
++     /* Clear PDSP State RAM */
++     /*pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
++     for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
++     *pTmp++ = 0;*/
++    }
++
++  /* Configure PDSP State RAM */
++
++  /* Setup TX PDSP State RAM */
++  pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
++  *pTmp++ = HalCh->TxVc_CellRate;        /* Set the cell rate in cells/sec */
++  *pTmp++ = HalCh->TxVc_QosType;         /* Configure the QoS Type */
++  *pTmp++ = HalCh->TxVc_Mbs;             /* Set minimum burst size */
++  *pTmp++ = 0;                           /* (skip a register) */
++  *pTmp++ = HalCh->TxVc_Pcr;             /* set the peak cell rate */
++  *pTmp++ = 0;                           /* new addition 4.9.02 */
++  *pTmp++ = HalCh->TxVc_AtmHeader;       /* give the ATM header */
++  *pTmp++ = (HalCh->TxVc_OamTc << 8) 
++            |(HalCh->TxVc_VpOffset);     /* Set the OAM TC Path and VP Offset */
++   
++  /* Setup RX PDSP State RAM */
++  *pTmp++ = (HalCh->RxVc_OamCh)|
++    (HalDev->OamMode << 8) |
++    (HalCh->RxVc_OamToHost<<9);          /* Set OAM Channel, Mode, and ToHost options */
++  *pTmp++ = HalCh->RxVc_AtmHeader;       /* ATM hdr put on firmware generated OAM */
++  *pTmp++ = (HalCh->RxVc_VpOffset)|      /* Set Rx OAM TC Path and VP Offset */
++    (HalCh->RxVc_OamTc<<8);                 
++           
++  /* Setup TX VP PDSP State RAM */
++  pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset+16); /*GSG~030703 12->16 */
++  *pTmp++ = HalCh->TxVp_AtmHeader;
++  *pTmp++ = (HalCh->TxVp_OamTc << 8);
++
++  /* Setup RX VP PDSP State RAM */
++  pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset+20); /*GSG~030703 16->20 */
++  *pTmp++ = HalCh->RxVp_AtmHeader;
++  *pTmp++ = (HalCh->RxVp_OamCh)|
++    (HalCh->RxVp_OamTc<<8)|
++    (HalCh->RxVp_OamToHost<<9);           /* Set OAM Channel, Mode, and ToHost options */
++  *pTmp++ = 0;
++  *pTmp++ = HalCh->RxVp_OamVcList;
++
++  /* Configure forwarding of unknown VCI/VPI cells */
++  if (HalCh->PktType == 3)
++    SAR_PDSP_FWD_UNK_VC_REG(HalDev->dev_base) = ((HalCh->FwdUnkVc<<31)|Ch);
++
++  /* Configure Tx Channel Mapping Register (turn channel "ON") */
++  TX_CH_MAPPING_REG(HalDev->dev_base) = 0x80000000  | 
++                                        (HalCh->DaMask << 30) 
++                                        | (HalCh->Priority << 24) | Ch;
++
++  /* Setup Rx Channel in the LUT */
++  i=0;
++  while (!(RX_LUT_CH_SETUP_REQ_REG(HalDev->dev_base) & 0x80000000))
++    {
++    if (i > WAIT_THRESH)
++      {
++       return(EC_CPSAR|EC_FUNC_CHSETUP|EC_VAL_LUT_NOT_READY);
++      }
++    else
++      i++;
++    }
++
++  /* RX LUT is ready */
++  RX_LUT_CH_SETUP_REQ_REG(HalDev->dev_base) = (HalCh->PktType << 24) | Ch;
++  RX_LUT_CH_SETUP_REQ_VC_REG(HalDev->dev_base) = ((HalCh->Vpi << 20) |  
++    (HalCh->Vci << 4));
++
++  return (EC_NO_ERRORS);
++  }
++
++static int halChannelTeardown(CPSAR_DEVICE *HalDev, int Ch, bit32 Mode)
++  {
++   int waitcnt = 0;
++   int PdspBlockOffset = 0, i;
++   volatile bit32u *pTmp;
++
++#ifdef __CPHAL_DEBUG
++  if (DBG(0))
++    {
++     dbgPrintf("[cpsar]halChannelTeardown(HalDev:%08x, Ch:%d, Mode:%d\n", 
++                            (bit32u)HalDev, Ch, Mode);
++     osfuncSioFlush();
++    }
++#endif
++
++   if ((Ch < 0) || (Ch > MAX_CHAN)) 
++     return(EC_CPSAR|EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
++
++   /* Request RX channel teardown through LUT */
++   while ((RX_LUT_CH_TEARDOWN_REQ_REG(HalDev->dev_base) & 0x80000000) == 0)
++     {
++      waitcnt++;
++      if (waitcnt == WAIT_THRESH)
++        {
++         return(EC_CPSAR|EC_FUNC_CHTEARDOWN|EC_VAL_LUT_NOT_READY);
++        }
++     }
++
++   RX_LUT_CH_TEARDOWN_REQ_REG(HalDev->dev_base) = (Ch & 0xffff);
++
++   /* for AAL2, clear channel PDSP RAM here.  AAL5 does it when the teardown
++      has completed (which is asynchronous)*/
++   if (Ch > 15)
++     {
++      /* Get the offset to the AAL2 portion of the block (in words) */
++      PdspBlockOffset = NUM_PDSP_AAL5_STATE_WORDS + ((Ch-16)*64);
++      /* Clear PDSP State RAM */
++      pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
++      for (i=0; i<NUM_PDSP_AAL2_STATE_WORDS; i++)
++        *pTmp++ = 0;
++     }
++
++   return (EC_NO_ERRORS);
++  }
++
++int InitPdsp(CPSAR_DEVICE *HalDev)
++  {
++   bit32u NumOfEntries,i,IRamAddress,iTmp;
++   int *SarPdspFirmware; /* ~GSG 030403 */
++   int FirmwareSize, rc; /* ~GSG 030403 */
++
++#ifdef __CPHAL_DEBUG
++  if (DBG(0))
++    {
++     dbgPrintf("[cpsar]InitPdsp(HalDev:%08x)\n", (bit32u)HalDev);
++     osfuncSioFlush();
++    }
++#endif
++
++   /* Get firmware */
++   rc = HalDev->OsFunc->Control(HalDev->OsDev, "Firmware", "Get", &SarPdspFirmware);  /* ~GSG 030403 */
++   if (rc)                                                  /* +GSG 030403 */
++     return (EC_CPSAR|EC_FUNC_OPEN|EC_VAL_KEY_NOT_FOUND);   /* +GSG 030403 */
++
++   /* Get firmware size */
++   rc = HalDev->OsFunc->Control(HalDev->OsDev, "FirmwareSize", "Get", &FirmwareSize); /* ~GSG 030403 */
++   if (rc)                                                  /* +GSG 030403 */
++     return (EC_CPSAR|EC_FUNC_OPEN|EC_VAL_KEY_NOT_FOUND);   /* +GSG 030403 */
++
++   IRamAddress = (bit32u) pPDSP_CTRL_REG(HalDev->dev_base);
++ 
++   NumOfEntries = (FirmwareSize)/4;                         /* ~GSG 030403 */
++   if (NumOfEntries > IRAM_SIZE)
++     {
++       /* Note: On Avalanche, they truncated the PDSP firmware and warned */
++       /* NumOfEntries = IRAM_SIZE; */
++       return(EC_CPSAR|EC_FUNC_INIT|EC_VAL_FIRMWARE_TOO_LARGE);
++     }
++   for(i=8;i<NumOfEntries;i++)
++     (*((bit32 *) (IRamAddress+(i*4))))=SarPdspFirmware[i]; /* ~GSG 030403 */
++
++      /* Check code */
++   for(i=8;i<NumOfEntries;i++)
++     {
++       iTmp=(*((bit32 *) (IRamAddress+(i*4))));
++       if (iTmp != SarPdspFirmware[i])                      /* ~GSG 030403 */
++         {
++           return(EC_CPSAR|EC_FUNC_OPEN|EC_VAL_PDSP_LOAD_FAIL);
++         }
++     }
++      
++   return(EC_NO_ERRORS);
++  }
++
++/*
++ *  This function probes for the instance of the CPHAL module.  It will call
++ *  the OS function @c DeviceFindInfo() to get the information required.
++ *  
++ *  @param   HalDev      CPHAL module instance. (set by xxxInitModule())
++ *
++ *  @return  0 OK, Otherwise error.
++ */
++static int halProbe(CPSAR_DEVICE *HalDev)
++  {
++   int Ret;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]halProbe(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(1))
++     {
++      dbgPrintf("[os]DeviceFindInfo(Inst:%d, DeviceName:%s, DeviceInfo:%08x)\n",
++                HalDev->Inst, "sar", (bit32u)&HalDev->DeviceInfo);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Attempt to find the device information */
++   Ret = HalDev->OsFunc->DeviceFindInfo(HalDev->Inst, "sar", &HalDev->DeviceInfo);
++   if (Ret)
++     return(EC_CPSAR|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND);
++
++   return(EC_NO_ERRORS);    
++  }
++
++#ifdef __CPHAL_DEBUG
++static void dbgConfigDump(HAL_DEVICE *HalDev)
++  {
++   dbgPrintf("  [cpsar Inst %d] Config Dump:\n", HalDev->Inst);
++   dbgPrintf("    Base    :%08x, offset   :%08d\n", 
++             HalDev->dev_base, HalDev->offset);
++   dbgPrintf("    ResetBit:%08d, ResetBase:%08x\n", 
++             HalDev->ResetBit, HalDev->ResetBase);
++   dbgPrintf("    UniNni  :%08d, debug    :%08d\n", 
++             HalDev->ResetBit, HalDev->debug);
++   osfuncSioFlush();
++  }
++#endif
++
++/*
++ * Sets up HAL default configuration parameter values.
++ */
++static void ConfigInit(CPSAR_DEVICE *HalDev)
++  {
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]ConfigInit(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++   /* configure some defaults with tnetd7300 values */
++   HalDev->dev_base = 0xa3000000;
++   HalDev->offset = 0;
++   HalDev->UniNni = CFG_UNI_NNI;
++   HalDev->ResetBit = 9;
++   HalDev->debug = 0;
++   HalDev->ResetBase = 0xa8611600;
++  }
++
++/*
++ * Retrieve HAL configuration parameter values.
++ */
++static bit32u ConfigGet(HAL_DEVICE *HalDev)
++  {
++   bit32u ParmValue, error_code;
++   char *DeviceInfo = HalDev->DeviceInfo;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]ConfigGet(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* get the configuration parameters common to all modules */
++   error_code = ConfigGetCommon(HalDev);
++   if (error_code) return (EC_CPSAR|error_code);
++
++   /* get SAR specific configuration parameters */
++   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo,"UniNni",&ParmValue);
++   if (!error_code) HalDev->UniNni = ParmValue;
++
++   return (EC_NO_ERRORS);
++  }
++
++static int halInit(CPSAR_DEVICE *HalDev)
++  {
++   bit32u Ret;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]halInit(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(7))
++     {
++      dbgPrintf("[cpsar halInit()]InitCount = %d\n", HalDev->InitCount);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Only run the init code for the first calling module per instance */
++   if (HalDev->InitCount > 1)
++     {
++      return (EC_NO_ERRORS);
++     }
++
++   /* Configure HAL defaults */
++   ConfigInit(HalDev);
++
++   /* Retrieve HAL configuration parameters from data store */
++   Ret = ConfigGet(HalDev);
++   if (Ret) return (Ret);
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(9))
++     dbgConfigDump(HalDev);
++#endif
++
++   return(EC_NO_ERRORS);
++  }
++
++static int halOpen(CPSAR_DEVICE *HalDev)
++  {
++   int Ret, Ticks=64;
++   int i;              /*+GSG 030407*/
++   volatile int *pTmp; /*+GSG 030407*/
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]halOpen(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(7))
++     {
++      dbgPrintf("[cpsar halOpen()]OpenCount = %d\n", HalDev->OpenCount);      
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Only run the open code for the first calling module per instance */
++   if (HalDev->OpenCount++ > 0)
++     {
++      return (EC_NO_ERRORS);
++     }
++
++   /* Take SAR out of reset */
++   if (((*(volatile bit32u *)(HalDev->ResetBase)) & (1<<HalDev->ResetBit)) != 0)
++     {
++       /** @todo Should I somehow call AAL5/AAL2 Close() here? All I've done
++           here is copy the Close code from each and paste it here. */   
++
++#ifdef __CPHAL_DEBUG
++      if (DBG(7))
++        {
++         dbgPrintf("[cpsar halOpen()]Module was already out of reset.\n");
++         dbgPrintf("                 Closing module and resetting.\n");
++         osfuncSioFlush();
++        }
++#endif
++
++      /* Disable the Tx CPPI DMA */
++      TX_CPPI_CTL_REG(HalDev->dev_base) = 0;
++
++      /* Disable the Rx CPPI DMA */
++      RX_CPPI_CTL_REG(HalDev->dev_base) = 0;
++
++      /* Disable the PDSP */
++      PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x00000002;
++
++      /* disable interrupt masks */
++      SAR_TX_MASK_CLR(HalDev->dev_base) = 0xffffffff;
++      SAR_RX_MASK_CLR(HalDev->dev_base) = 0xffffffff;
++
++#ifndef NO_RESET /* GSG+ 030428 */
++      /* clear reset bit */
++      (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit); /* ~GSG 030307 */
++      HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
++
++      /* set reset bit */
++      (*(volatile bit32u *)(HalDev->ResetBase)) |= (1<<HalDev->ResetBit); /* ~GSG 030307 */
++      HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
++#endif /* GSG+ 030428 */
++     }
++    else
++     {
++      (*(volatile bit32u *)(HalDev->ResetBase)) |= (1<<HalDev->ResetBit); /* ~GSG 030307 */
++      HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
++     }
++
++   /* Configure UNI/NNI */
++   RX_LUT_GLOBAL_CFG_REG(HalDev->dev_base) |= (HalDev->UniNni & 0x1);
++
++   /* Clear entire PDSP state RAM */                /*+GSG 030407*/
++   pTmp = (pTX_DMA_STATE_WORD_0(HalDev->dev_base)); /*+GSG 030407*/
++   for (i=0; i<PDSP_STATE_RAM_SIZE; i++)            /*+GSG 030407*/
++     *pTmp++ = 0;                                   /*+GSG 030407*/
++
++   /* Configure Oam Mode */                         /*+GSG 030407*/
++   SetOamMode(HalDev);                              /*+GSG 030407*/
++
++   /* Initialize PDSP */
++   Ret=InitPdsp(HalDev);
++   if(Ret)
++     return(Ret);
++
++   /* Reset and Enable the PDSP */
++   PDSP_CTRL_REG(HalDev->dev_base) = 0x00080003;
++
++   return(EC_NO_ERRORS);
++  }
++
++static int halClose(CPSAR_DEVICE *HalDev, int Mode)
++  {
++   int Ticks = 64;
++
++#ifdef __CPHAL_DEBUG
++  if (DBG(0))
++    {
++     dbgPrintf("[cpsar]halClose(HalDev:%08x, Mode:%d)\n", (bit32u)HalDev, Mode);
++     osfuncSioFlush();
++    }
++#endif
++
++   /* handle the error case if there is nothing open */
++   if (HalDev->OpenCount == 0)
++     {
++      return(EC_CPSAR|EC_FUNC_CLOSE|EC_VAL_MODULE_ALREADY_CLOSED);
++     }
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(7))
++     {
++      dbgPrintf("[cpsar halClose()]OpenCount = %d\n", HalDev->OpenCount);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Only run the close code for the last calling module per instance */
++   if (HalDev->OpenCount-- > 1)
++     {
++      return (EC_NO_ERRORS);
++     }
++
++   /* Disable the PDSP */
++   PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x00000002;
++
++#ifndef NO_RESET /* GSG +030428 */
++   /* put device back into reset */
++   (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit); /* ~GSG 030307 */
++   HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
++#endif /* GSG +030428 */
++
++   return(EC_NO_ERRORS);
++  }
++
++static int halShutdown(CPSAR_DEVICE *HalDev)
++  {
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]halShutdown(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* handle the error case */
++   if (HalDev->InitCount == 0)
++     {
++      return(EC_CPSAR|EC_FUNC_CLOSE|EC_VAL_MODULE_ALREADY_SHUTDOWN);
++     }
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(7))
++     {
++      dbgPrintf("[cpsar halShutdown()]InitCount = %d\n", HalDev->InitCount);
++      osfuncSioFlush();
++     }
++#endif
++
++   /* Only run the shutdown code for the last calling module per instance */
++   if (HalDev->InitCount-- > 1)
++     {
++      return (EC_NO_ERRORS);
++     }
++
++   /* free the SAR functions */
++#ifdef __CPHAL_DEBUG
++   if (DBG(6))
++     {
++      dbgPrintf("  [cpsar halShutdown()]: Free CPSAR function pointers\n");
++      osfuncSioFlush();
++     }
++   if (DBG(1)||DBG(3))
++     {
++      dbgPrintf("[os]Free(MemPtr:%08x)\n", (bit32u)HalDev->HalFuncPtr);
++      osfuncSioFlush();
++     }
++#endif
++   /* free the HalFunc */
++   HalDev->OsFunc->Free(HalDev->HalFuncPtr);
++
++   /* we have a static global, so I should clear it's value as well */
++   CpsarDev[HalDev->Inst] = 0;
++
++#ifdef __CPHAL_DEBUG
++   if (DBG(6))
++     {
++      dbgPrintf("  [cpsar halShutdown()]Free HalDev\n");
++      osfuncSioFlush();
++     }
++   if (DBG(1)||DBG(3))
++     {
++      dbgPrintf("[os]Free(MemPtr:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++   /* free the CPSAR device */
++   HalDev->OsFunc->Free(HalDev);
++
++   return(EC_NO_ERRORS);
++  }
++
++static int halTick(CPSAR_DEVICE *HalDev)
++  {   
++#ifdef __CPHAL_DEBUG
++   if (DBG(0))
++     {
++      dbgPrintf("[cpsar]halTick(HalDev:%08x)\n", (bit32u)HalDev);
++      osfuncSioFlush();
++     }
++#endif
++
++   return(EC_NO_ERRORS); 
++  }
++
++/*
++ *  The CPSAR version of InitModule() should be passed the OS_FUNCTIONS pointer,
++ *  and will return the HalDev pointer.
++ *
++ *  @param   HalDev  Pointer to CPSAR module information.  This will 
++ *                   be used by the OS when communicating to this module via 
++ *                   CPSAR. 
++ *  @param   OsDev   Pointer to OS device information.  This will be saved by
++ *                   the CPSAR and returned to the OS when required.
++ *  @param   HalFunc HAL_FUNCTIONS pointer.
++ *  @param   Size    Pointer to the size of the HAL_FUNCTIONS structure.  (If
++ *                   HalFunc is 0, the value will be set by CPSAR, otherwise 
++ *                   ignored)
++ *  @param   Inst    The instance number of the module to initialize. (start at
++ *                   0).
++ * 
++ *  @return  0 OK, Nonzero - error.
++ */
++/*
++int cpsarInitModule(CPSAR_DEVICE **HalDev, 
++                 OS_DEVICE *OsDev, 
++                 CPSAR_FUNCTIONS *HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int *Size,
++                 int Inst)
++*/
++int cpsarInitModule(CPSAR_DEVICE **HalDev, 
++                 OS_DEVICE *OsDev, 
++                 CPSAR_FUNCTIONS **HalFunc, 
++                 OS_FUNCTIONS *OsFunc, 
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst)
++  {
++   CPSAR_DEVICE *HalPtr;
++   CPSAR_FUNCTIONS *HalFuncPtr;
++
++   /*
++   if ( HalFunc == 0 )
++     {
++      *Size = sizeof(CPSAR_FUNCTIONS);
++      return(EC_NO_ERRORS);   
++     }
++   */
++
++   if (CpsarDev[Inst] != 0)
++     {
++      /* this SAR module has been connected to before, so do not
++         allocate another CPSAR_DEVICE */
++      HalPtr = CpsarDev[Inst];
++  
++      /* increase count of attached modules */
++      HalPtr->InitCount++;
++     }
++    else
++     {
++      /* allocate the CPSAR_DEVICE structure */
++      HalPtr = (CPSAR_DEVICE *) OsFunc->MallocDev(sizeof(CPSAR_DEVICE));
++      if(!HalPtr)
++        return(EC_CPSAR|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
++
++      HalFuncPtr = (CPSAR_FUNCTIONS *) OsFunc->Malloc(sizeof(CPSAR_FUNCTIONS));
++      if (!HalFuncPtr)
++        return (EC_CPSAR|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
++
++      /* Initialize the size of hal functions */
++      *HalFuncSize = sizeof (CPSAR_FUNCTIONS);
++
++      /* ensure the device structure is cleared */
++      OsFunc->Memset(HalPtr, 0, sizeof(CPSAR_DEVICE));
++      
++      /* clear the function pointers */
++      OsFunc->Memset(HalFuncPtr, 0, sizeof(CPSAR_FUNCTIONS));
++
++      /* Supply pointers for the CPSAR API functions */
++      HalFuncPtr->ChannelSetup    = halChannelSetup;
++      HalFuncPtr->ChannelTeardown = halChannelTeardown;
++      HalFuncPtr->Close           = halClose;
++      HalFuncPtr->Control         = halControl;
++      HalFuncPtr->Init            = halInit;
++      HalFuncPtr->Open            = halOpen;
++      HalFuncPtr->Probe           = halProbe;
++      HalFuncPtr->Shutdown        = halShutdown;
++      HalFuncPtr->Tick            = halTick;
++
++      /* keep a reference to HalFuncPtr so I can free it later */
++      HalPtr->HalFuncPtr = HalFuncPtr;
++
++      /* store the CPSAR_DEVICE, so the CPSAR module will know whether
++         it is in use for the given instance */
++      CpsarDev[Inst] = HalPtr;
++     
++      /* increase count of attached modules */
++      HalPtr->InitCount++;
++     }
++
++   /* @todo Does this need modification to deal with multiple callers/
++      drivers?  If different callers will use different OsDev/OsFunc,
++      then the current code will not work.
++   */
++
++   /* initialize the CPSAR_DEVICE structure */
++   HalPtr->OsDev  = OsDev;
++   /*HalPtr->OsOpen = OsDev;*/
++   HalPtr->Inst   = Inst;
++   HalPtr->OsFunc = OsFunc;
++
++   /* pass the HalPtr back to the caller */
++   *HalDev = HalPtr;
++   *HalFunc = HalPtr->HalFuncPtr;
++
++   return (EC_NO_ERRORS);
++  }
+diff -urN linux.old/drivers/atm/sangam_atm/cpsar_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpsar_cpaal5.h
+--- linux.old/drivers/atm/sangam_atm/cpsar_cpaal5.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpsar_cpaal5.h	2005-08-23 04:46:50.087845216 +0200
+@@ -0,0 +1,103 @@
++/*******************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE:   cpsar.h
++ *
++ *  DESCRIPTION:
++ *      This file contains data structure definitions for the CPSAR HAL.
++ *
++ *  HISTORY:
++ *      6Sep02 Greg        1.00  Original Version created. 
++ *
++ *****************************************************************************/
++#ifndef _INC_CPSAR
++#define _INC_CPSAR
++
++#define NUM_RX_STATE_WORDS    7
++#define NUM_TX_STATE_WORDS    9
++#define MAX_CHAN        19
++
++
++#ifndef _CPHAL_CPSAR
++typedef void CPSAR_DEVICE;
++#endif
++
++/* 
++ * HAL Default Parameter Values
++ */
++#define  CFG_UNI_NNI  0
++
++/**
++ *  @ingroup shared_data
++ * 
++ *  List of defined keys for use with Control().
++ */
++typedef enum 
++  {
++   /* SAR */
++   enGET_FIRMWARE,        /**< Used by the SAR to request a pointer to firmware */
++   enGET_FIRMWARE_SIZE,   /**< Used by the SAR to request the size of the firmware */
++   enEND=9999 /* Last entry */
++  }INFO_KEY;
++
++/*
++ *  The CPHAL_FUNCTIONS struct defines the CPHAL function pointers used by upper layer 
++ *  software.  The upper layer software receives these pointers through the
++ *  call to cphalInitModule().
++ */
++typedef struct
++  {
++  int  (*ChannelSetup)(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh);
++  int  (*ChannelTeardown)(CPSAR_DEVICE *HalDev, int Ch, int Mode);
++  int  (*Close)(CPSAR_DEVICE *HalDev, int Mode);
++  int  (*Control)(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value); 
++  int  (*Init)(CPSAR_DEVICE *HalDev);
++  int  (*ModeChange)(CPSAR_DEVICE *HalDev, char *DeviceParms);
++  int  (*Open)(CPSAR_DEVICE *HalDev);
++  int  (*Probe)(CPSAR_DEVICE *HalDev);
++  int  (*Shutdown)(CPSAR_DEVICE *HalDev);
++  int  (*Tick)(CPSAR_DEVICE *HalDev);
++  } CPSAR_FUNCTIONS;
++
++/*
++ *  This is the data structure for a generic HAL device.  It contains all device
++ *  specific data for a single instance of that device.  This includes Rx/Tx 
++ *  buffer queues, device base address, reset bit, and other information.
++ */
++typedef struct cpsar_device
++  {    
++   bit32  dev_base;
++   bit32  offset;
++   bit32  TxTeardownPending[MAX_CHAN];
++   bit32  RxTeardownPending[MAX_CHAN];
++   bit32  ChIsOpen[MAX_CHAN];
++   bit32  ResetBit;
++   bit32  debug;
++   OS_DEVICE *OsDev;
++   OS_FUNCTIONS *OsFunc;
++    /*void   *OsOpen;*/
++   bit32  UniNni;
++   bit32  Inst;
++   bit32u DeviceCPID[4];
++   bit32u LBSourceLLID[4];
++   bit32u OamRate[11];
++   CHANNEL_INFO ChData[MAX_CHAN];
++   int    InitCount;
++   int    OpenCount;
++   char   *DeviceInfo;
++   bit32u ResetBase;
++   DEVICE_STATE State;
++   CPSAR_FUNCTIONS *HalFuncPtr;
++   int    OamMode; /* +GSG 030407 */
++  }CPSARDEVICE;
++
++extern int cpsarInitModule(CPSAR_DEVICE **HalDev, 
++                 OS_DEVICE *OsDev, 
++                 CPSAR_FUNCTIONS **HalFunc, 
++                 OS_FUNCTIONS *OsFunc, 
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/cpsar.h linux.dev/drivers/atm/sangam_atm/cpsar.h
+--- linux.old/drivers/atm/sangam_atm/cpsar.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpsar.h	2005-08-23 04:46:50.087845216 +0200
+@@ -0,0 +1,103 @@
++/*******************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE:   cpsar.h
++ *
++ *  DESCRIPTION:
++ *      This file contains data structure definitions for the CPSAR HAL.
++ *
++ *  HISTORY:
++ *      6Sep02 Greg        1.00  Original Version created. 
++ *
++ *****************************************************************************/
++#ifndef _INC_CPSAR
++#define _INC_CPSAR
++
++#define NUM_RX_STATE_WORDS    7
++#define NUM_TX_STATE_WORDS    9
++#define MAX_CHAN        19
++
++
++#ifndef _CPHAL_CPSAR
++typedef void CPSAR_DEVICE;
++#endif
++
++/* 
++ * HAL Default Parameter Values
++ */
++#define  CFG_UNI_NNI  0
++
++/**
++ *  @ingroup shared_data
++ * 
++ *  List of defined keys for use with Control().
++ */
++typedef enum 
++  {
++   /* SAR */
++   enGET_FIRMWARE,        /**< Used by the SAR to request a pointer to firmware */
++   enGET_FIRMWARE_SIZE,   /**< Used by the SAR to request the size of the firmware */
++   enEND=9999 /* Last entry */
++  }INFO_KEY;
++
++/*
++ *  The CPHAL_FUNCTIONS struct defines the CPHAL function pointers used by upper layer 
++ *  software.  The upper layer software receives these pointers through the
++ *  call to cphalInitModule().
++ */
++typedef struct
++  {
++  int  (*ChannelSetup)(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh);
++  int  (*ChannelTeardown)(CPSAR_DEVICE *HalDev, int Ch, int Mode);
++  int  (*Close)(CPSAR_DEVICE *HalDev, int Mode);
++  int  (*Control)(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value); 
++  int  (*Init)(CPSAR_DEVICE *HalDev);
++  int  (*ModeChange)(CPSAR_DEVICE *HalDev, char *DeviceParms);
++  int  (*Open)(CPSAR_DEVICE *HalDev);
++  int  (*Probe)(CPSAR_DEVICE *HalDev);
++  int  (*Shutdown)(CPSAR_DEVICE *HalDev);
++  int  (*Tick)(CPSAR_DEVICE *HalDev);
++  } CPSAR_FUNCTIONS;
++
++/*
++ *  This is the data structure for a generic HAL device.  It contains all device
++ *  specific data for a single instance of that device.  This includes Rx/Tx 
++ *  buffer queues, device base address, reset bit, and other information.
++ */
++typedef struct cpsar_device
++  {    
++   bit32  dev_base;
++   bit32  offset;
++   bit32  TxTeardownPending[MAX_CHAN];
++   bit32  RxTeardownPending[MAX_CHAN];
++   bit32  ChIsOpen[MAX_CHAN];
++   bit32  ResetBit;
++   bit32  debug;
++   OS_DEVICE *OsDev;
++   OS_FUNCTIONS *OsFunc;
++    /*void   *OsOpen;*/
++   bit32  UniNni;
++   bit32  Inst;
++   bit32u DeviceCPID[4];
++   bit32u LBSourceLLID[4];
++   bit32u OamRate[11];
++   CHANNEL_INFO ChData[MAX_CHAN];
++   int    InitCount;
++   int    OpenCount;
++   char   *DeviceInfo;
++   bit32u ResetBase;
++   DEVICE_STATE State;
++   CPSAR_FUNCTIONS *HalFuncPtr;
++   int    OamMode; /* +GSG 030407 */
++  }CPSARDEVICE;
++
++extern int cpsarInitModule(CPSAR_DEVICE **HalDev, 
++                 OS_DEVICE *OsDev, 
++                 CPSAR_FUNCTIONS **HalFunc, 
++                 OS_FUNCTIONS *OsFunc, 
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/cp_sar_reg.h linux.dev/drivers/atm/sangam_atm/cp_sar_reg.h
+--- linux.old/drivers/atm/sangam_atm/cp_sar_reg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cp_sar_reg.h	2005-08-23 04:46:50.087845216 +0200
+@@ -0,0 +1,217 @@
++/***************************************************************************
++        TNETD73xx Software Support
++        Copyright(c) 2000, Texas Instruments Incorporated. All Rights Reserved.
++
++        FILE: cp_sar_reg.h   Register definitions for the SAR module
++
++        DESCRIPTION:
++                This include file contains register definitions for the
++                SAR module.
++
++        HISTORY:
++                15 Jan 02    G. Guyotte   Original version written
++                03 Oct 02    G. Guyotte   C++ style comments removed
++****************************************************************************/
++#ifndef _INC_SAR_REG
++#define _INC_SAR_REG
++
++/* Global Registers */
++#define pSAR_ID_REG(base)                   ((volatile bit32u *)(base+0x0000))
++#define SAR_ID_REG(base)                    (*pSAR_ID_REG(base))
++#define pSAR_STATUS_SET_REG(base)           ((volatile bit32u *)(base+0x0008))
++#define SAR_STATUS_SET_REG(base)            (*pSAR_STATUS_SET_REG(base))
++#define pSAR_STATUS_CLR_REG(base)           ((volatile bit32u *)(base+0x000C))
++#define SAR_STATUS_CLR_REG(base)            (*pSAR_STATUS_CLR_REG(base))
++#define pSAR_HOST_INT_EN_SET_REG(base)      ((volatile bit32u *)(base+0x0010))
++#define SAR_HOST_INT_EN_SET_REG(base)       (*pSAR_HOST_INT_EN_SET_REG(base))
++#define pSAR_HOST_INT_EN_CLR_REG(base)      ((volatile bit32u *)(base+0x0014))
++#define SAR_HOST_INT_EN_CLR_REG(base)       (*pSAR_HOST_INT_EN_CLR_REG(base))
++#define pSAR_PDSP_INT_EN_SET_REG(base)      ((volatile bit32u *)(base+0x0018))
++#define SAR_PDSP_INT_EN_SET_REG(base)       (*pSAR_PDSP_INT_EN_SET_REG(base))
++#define pSAR_PDSP_INT_EN_CLR_REG(base)      ((volatile bit32u *)(base+0x001C))
++#define SAR_PDSP_INT_EN_CLR_REG(base)       (*pSAR_PDSP_INT_EN_CLR_REG(base))
++
++/* PDSP OAM General Purpose Registers */
++#define pSAR_PDSP_HOST_OAM_CONFIG_REG(base) ((volatile bit32u *)(base+0x0020))
++#define SAR_PDSP_HOST_OAM_CONFIG_REG(base)  (*pSAR_PDSP_HOST_OAM_CONFIG_REG(base))
++#define pSAR_PDSP_OAM_CORR_REG(base)        ((volatile bit32u *)(base+0x0024))
++#define SAR_PDSP_OAM_CORR_REG(base)         (*pSAR_PDSP_OAM_CORR_REG(base))
++#define pSAR_PDSP_OAM_LB_RESULT_REG(base)   ((volatile bit32u *)(base+0x0028))
++#define SAR_PDSP_OAM_LB_RESULT_REG(base)    (*pSAR_PDSP_OAM_LB_RESULT_REG(base))
++#define pSAR_PDSP_OAM_F5_LB_COUNT_REG(base) ((volatile bit32u *)(base+0x002c))     /* +GSG 030416 */
++#define SAR_PDSP_OAM_F5_LB_COUNT_REG(base)  (*pSAR_PDSP_OAM_F5_LB_COUNT_REG(base)) /* +GSG 030416 */
++#define pSAR_PDSP_OAM_F4_LB_COUNT_REG(base) ((volatile bit32u *)(base+0x0030))     /* +GSG 030416 */
++#define SAR_PDSP_OAM_F4_LB_COUNT_REG(base)  (*pSAR_PDSP_OAM_F4_LB_COUNT_REG(base)) /* +GSG 030416 */
++#define pSAR_PDSP_FWD_UNK_VC_REG(base)      ((volatile bit32u *)(base+0x0034))     /* +GSG 030701 */
++#define SAR_PDSP_FWD_UNK_VC_REG(base)       (*pSAR_PDSP_FWD_UNK_VC_REG(base))      /* +GSG 030701 */
++
++
++/* Rx Lookup Table Registers */
++#define pRX_LUT_GLOBAL_CFG_REG(base)        ((volatile bit32u *)(base+0x0080))
++#define RX_LUT_GLOBAL_CFG_REG(base)         (*pRX_LUT_GLOBAL_CFG_REG(base))
++#define pRX_LUT_CH_SETUP_REQ_REG(base)      ((volatile bit32u *)(base+0x0090))
++#define RX_LUT_CH_SETUP_REQ_REG(base)       (*pRX_LUT_CH_SETUP_REQ_REG(base))
++#define pRX_LUT_CH_SETUP_REQ_VC_REG(base)   ((volatile bit32u *)(base+0x0094))
++#define RX_LUT_CH_SETUP_REQ_VC_REG(base)    (*pRX_LUT_CH_SETUP_REQ_VC_REG(base))
++#define pRX_LUT_CH_TEARDOWN_REQ_REG(base)   ((volatile bit32u *)(base+0x009C))
++#define RX_LUT_CH_TEARDOWN_REQ_REG(base)    (*pRX_LUT_CH_TEARDOWN_REQ_REG(base))
++
++/* Tx Scheduler Registers */
++#define pTX_CH_MAPPING_REG(base)            ((volatile bit32u *)(base+0x0170))
++#define TX_CH_MAPPING_REG(base)             (*pTX_CH_MAPPING_REG(base))
++
++/* Tx CPPI DMA Controller Registers */
++#define pTX_CPPI_CTL_REG(base)              ((volatile bit32u *)(base+0x0700))
++#define TX_CPPI_CTL_REG(base)               (*pTX_CPPI_CTL_REG(base))
++#define pTX_CPPI_TEARDOWN_REG(base)         ((volatile bit32u *)(base+0x0704))
++#define TX_CPPI_TEARDOWN_REG(base)          (*pTX_CPPI_TEARDOWN_REG(base))
++
++/* EOI Interrupt Additions */
++#define pSAR_EOI(base)                      ((volatile bit32u *)(base+0x0708))
++#define SAR_EOI(base)                       (*pSAR_EOI(base))
++#define pSAR_INTR_VECTOR(base)              ((volatile bit32u *)(base+0x070c))
++#define SAR_INTR_VECTOR(base)               (*pSAR_INTR_VECTOR(base))
++#define pSAR_TX_MASKED_STATUS(base)         ((volatile bit32u *)(base+0x0710))
++#define SAR_TX_MASKED_STATUS(base)          (*pSAR_TX_MASKED_STATUS(base))
++#define pSAR_TX_RAW_STATUS(base)            ((volatile bit32u *)(base+0x0714))
++#define SAR_TX_RAW_STATUS(base)             (*pSAR_TX_RAW_STATUS(base))
++#define pSAR_TX_MASK_SET(base)              ((volatile bit32u *)(base+0x0718))
++#define SAR_TX_MASK_SET(base)               (*pSAR_TX_MASK_SET(base))
++#define pSAR_TX_MASK_CLR(base)              ((volatile bit32u *)(base+0x071c))
++#define SAR_TX_MASK_CLR(base)               (*pSAR_TX_MASK_CLR(base))
++
++/* Rx CPPI DMA Controller Registers */
++#define pRX_CPPI_CTL_REG(base)              ((volatile bit32u *)(base+0x0780))
++#define RX_CPPI_CTL_REG(base)               (*pRX_CPPI_CTL_REG(base))
++#define pSAR_RX_MASKED_STATUS(base)         ((volatile bit32u *)(base+0x0790))
++#define SAR_RX_MASKED_STATUS(base)          (*pSAR_RX_MASKED_STATUS(base))
++#define pSAR_RX_RAW_STATUS(base)            ((volatile bit32u *)(base+0x0794))
++#define SAR_RX_RAW_STATUS(base)             (*pSAR_RX_RAW_STATUS(base))
++#define pSAR_RX_MASK_SET(base)              ((volatile bit32u *)(base+0x0798))
++#define SAR_RX_MASK_SET(base)               (*pSAR_RX_MASK_SET(base))
++#define pSAR_RX_MASK_CLR(base)              ((volatile bit32u *)(base+0x079c))
++#define SAR_RX_MASK_CLR(base)               (*pSAR_RX_MASK_CLR(base))
++
++/* PDSP Control/Status Registers */
++#define pPDSP_CTRL_REG(base)                ((volatile bit32u *)(base+0x4000))
++#define PDSP_CTRL_REG(base)                 (*pPDSP_CTRL_REG(base))
++
++/* PDSP Instruction RAM */
++#define pPDSP_IRAM(base)                    ((volatile bit32u *)(base+0x4020))
++#define PDSP_IRAM(base)                     (*pPDSP_IRAM(base))
++
++/*
++ * Channel 0 State/Scratchpad RAM Block
++ * 
++ * The following registers (Tx DMA State, Rx DMA State, CPPI Completion PTR, 
++ * and PDSP Data) have been given the correct address for channel 0.  To
++ * reach the registers for channel X, add (X * 0x100) to the pointer address.
++ *
++ */
++
++#define PDSP_STATE_RAM_SIZE   1024
++
++/* Tx DMA State RAM */
++#define pTX_DMA_STATE_WORD_0(base)          ((volatile bit32u *)(base+0x8000))
++#define TX_DMA_STATE_WORD_0(base)           (*pTX_DMA_STATE_WORD_0(base))
++#define pTX_DMA_STATE_WORD_1(base)          ((volatile bit32u *)(base+0x8004))
++#define TX_DMA_STATE_WORD_1(base)           (*pTX_DMA_STATE_WORD_1(base))
++#define pTX_DMA_STATE_WORD_2(base)          ((volatile bit32u *)(base+0x8008))
++#define TX_DMA_STATE_WORD_2(base)           (*pTX_DMA_STATE_WORD_2(base))
++#define pTX_DMA_STATE_WORD_3(base)          ((volatile bit32u *)(base+0x800C))
++#define TX_DMA_STATE_WORD_3(base)           (*pTX_DMA_STATE_WORD_3(base))
++#define pTX_DMA_STATE_WORD_4(base)          ((volatile bit32u *)(base+0x8010))
++#define TX_DMA_STATE_WORD_4(base)           (*pTX_DMA_STATE_WORD_4(base))
++#define pTX_DMA_STATE_WORD_5(base)          ((volatile bit32u *)(base+0x8014))
++#define TX_DMA_STATE_WORD_5(base)           (*pTX_DMA_STATE_WORD_5(base))
++#define pTX_DMA_STATE_WORD_6(base)          ((volatile bit32u *)(base+0x8018))
++#define TX_DMA_STATE_WORD_6(base)           (*pTX_DMA_STATE_WORD_6(base))
++#define pTX_DMA_STATE_WORD_7(base)          ((volatile bit32u *)(base+0x801C))
++#define TX_DMA_STATE_WORD_7(base)           (*pTX_DMA_STATE_WORD_7(base))
++#define pTX_DMA_STATE_WORD_8(base)          ((volatile bit32u *)(base+0x8020))
++#define TX_DMA_STATE_WORD_8(base)           (*pTX_DMA_STATE_WORD_8(base))
++
++/* Rx DMA State RAM */
++#define pRX_DMA_STATE_WORD_0(base)          ((volatile bit32u *)(base+0x8024))
++#define RX_DMA_STATE_WORD_0(base)           (*pRX_DMA_STATE_WORD_0(base))
++#define pRX_DMA_STATE_WORD_1(base)          ((volatile bit32u *)(base+0x8028))
++#define RX_DMA_STATE_WORD_1(base)           (*pRX_DMA_STATE_WORD_1(base))
++#define pRX_DMA_STATE_WORD_2(base)          ((volatile bit32u *)(base+0x802C))
++#define RX_DMA_STATE_WORD_2(base)           (*pRX_DMA_STATE_WORD_2(base))
++#define pRX_DMA_STATE_WORD_3(base)          ((volatile bit32u *)(base+0x8030))
++#define RX_DMA_STATE_WORD_3(base)           (*pRX_DMA_STATE_WORD_3(base))
++#define pRX_DMA_STATE_WORD_4(base)          ((volatile bit32u *)(base+0x8034))
++#define RX_DMA_STATE_WORD_4(base)           (*pRX_DMA_STATE_WORD_4(base))
++#define pRX_DMA_STATE_WORD_5(base)          ((volatile bit32u *)(base+0x8038))
++#define RX_DMA_STATE_WORD_5(base)           (*pRX_DMA_STATE_WORD_5(base))
++#define pRX_DMA_STATE_WORD_6(base)          ((volatile bit32u *)(base+0x803C))
++#define RX_DMA_STATE_WORD_6(base)           (*pRX_DMA_STATE_WORD_6(base))
++
++/* Tx CPPI Completion Pointers */
++#define pTXH_CPPI_COMP_PTR(base)            ((volatile bit32u *)(base+0x8040))
++#define TXH_CPPI_COMP_PTR(base)             (*pTXH_CPPI_COMP_PTR(base))
++#define pTXL_CPPI_COMP_PTR(base)            ((volatile bit32u *)(base+0x8044))
++#define TXL_CPPI_COMP_PTR(base)             (*pTXL_CPPI_COMP_PTR(base))
++
++/* Rx CPPI Completion Pointer */
++#define pRX_CPPI_COMP_PTR(base)             ((volatile bit32u *)(base+0x8048))
++#define RX_CPPI_COMP_PTR(base)              (*pRX_CPPI_COMP_PTR(base))
++
++/* Tx PDSP Defines */
++#define NUM_PDSP_AAL5_STATE_WORDS           24
++#define NUM_PDSP_AAL2_STATE_WORDS           20
++
++/* PDSP State RAM Block 0 */
++#define pPDSP_BLOCK_0(base)                 ((volatile bit32u *)(base+0x8050))
++#define PDSP_BLOCK_0(base)                  (*pPDSP_BLOCK_0(base))
++
++/* AAL5 Tx PDSP State RAM */
++#define pPDSP_AAL5_TX_STATE_WORD_0(base)    ((volatile bit32u *)(base+0x8050))
++#define PDSP_AAL5_TX_STATE_WORD_0(base)     (*pPDSP_AAL5_TX_STATE_WORD_0(base))
++
++/* AAL5 Rx PDSP State RAM */
++#define pPDSP_AAL5_RX_STATE_WORD_0(base)    ((volatile bit32u *)(base+0x8070))
++#define PDSP_AAL5_RX_STATE_WORD_0(base)     (*pPDSP_AAL5_RX_STATE_WORD_0(base))
++
++/* AAL5 Tx VP PDSP State RAM */
++#define pPDSP_AAL5_TX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8090))
++#define PDSP_AAL5_TX_VP_STATE_WORD_0(base)  (*pPDSP_AAL5_TX_VP_STATE_WORD_0(base))
++
++/* AAL5 Rx VP PDSP State RAM */
++#define pPDSP_AAL5_RX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80A0))
++#define PDSP_AAL5_RX_VP_STATE_WORD_0(base)  (*pPDSP_AAL5_RX_VP_STATE_WORD_0(base))
++
++/* AAL2 Tx PDSP State RAM */
++#define pPDSP_AAL2_TX_STATE_WORD_0(base)    ((volatile bit32u *)(base+0x80B0))
++#define PDSP_AAL2_TX_STATE_WORD_0(base)     (*pPDSP_AAL2_TX_STATE_WORD_0(base))
++
++/* AAL2 Rx PDSP State RAM */
++#define pPDSP_AAL2_RX_STATE_WORD_0(base)    ((volatile bit32u *)(base+0x80D0))
++#define PDSP_AAL2_RX_STATE_WORD_0(base)     (*pPDSP_AAL2_RX_STATE_WORD_0(base))
++
++/* AAL2 Tx VP PDSP State RAM */
++#define pPDSP_AAL2_TX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80E0))
++#define PDSP_AAL2_TX_VP_STATE_WORD_0(base)  (*pPDSP_AAL2_TX_VP_STATE_WORD_0(base))
++
++/* AAL2 Rx VP PDSP State RAM */
++#define pPDSP_AAL2_RX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80F0))
++#define PDSP_AAL2_RX_VP_STATE_WORD_0(base)  (*pPDSP_AAL2_RX_VP_STATE_WORD_0(base))
++
++/* PDSP OAM Configuration Block */
++#define pOAM_CONFIG_BLOCK_WORD_0(base)      ((volatile bit32u *)(base+0x83C0))
++#define OAM_CONFIG_BLOCK_WORD_0(base)       (*pOAM_CONFIG_BLOCK_WORD_0(base))
++
++/* PDSP OAM Padding Block */
++#define pOAM_PADDING_BLOCK_WORD_0(base)     ((volatile bit32u *)(base+0x84C0))
++#define OAM_PADDING_BLOCK_WORD_0(base)      (*pOAM_PADDING_BLOCK_WORD_0(base))
++
++#define NUM_OAM_RATES 11
++
++/* PDSP OAM Timer State RAM */
++#define pOAM_TIMER_STATE_WORD_0(base)       ((volatile bit32u *)(base+0x85B0))
++#define OAM_TIMER_STATE_WORD_0(base)        (*pOAM_TIMER_STATE_WORD_0(base))
++
++
++/* END OF FILE */
++
++#endif _INC_SAR_REG
+diff -urN linux.old/drivers/atm/sangam_atm/cpswhal_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpswhal_cpaal5.h
+--- linux.old/drivers/atm/sangam_atm/cpswhal_cpaal5.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpswhal_cpaal5.h	2005-08-23 04:46:50.088845064 +0200
+@@ -0,0 +1,629 @@
++/************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE: cphal.h
++ *
++ *  DESCRIPTION:
++ *      User include file, contains data definitions shared between the CPHAL
++ *      and the upper-layer software.
++ *
++ *  HISTORY:
++ *      Date      Modifier  Ver    Notes
++ *      28Feb02   Greg      1.00   Original
++ *      06Mar02   Greg      1.01   Documentation enhanced
++ *      18Jul02   Greg      1.02   Many updates (OAM additions, general reorg)
++ *      22Nov02   Mick      RC2    Additions from Denis' input on Control
++ *
++ *  author  Greg Guyotte
++ *  version 1.02
++ *  date    18-Jul-2002
++ *****************************************************************************/
++#ifndef _INC_CPHAL_H
++#define _INC_CPHAL_H
++
++#ifdef _CPHAL_CPMAC
++#include "ec_errors_cpmac.h"
++#endif
++
++#ifdef _CPHAL_AAL5
++#include "ec_errors_cpaal5.h"
++#endif
++
++#ifdef _CPHAL_CPSAR
++#include "ec_errors_cpsar.h"
++#endif
++
++#ifdef _CPHAL_AAL2
++#include "ec_errors_cpaal2.h"
++#endif
++
++#ifndef __ADAM2
++typedef char           bit8;
++typedef short          bit16;
++typedef int            bit32;
++
++typedef unsigned char  bit8u;
++typedef unsigned short bit16u;
++typedef unsigned int   bit32u;
++
++/*
++typedef char           INT8;
++typedef short          INT16;
++typedef int            INT32;
++typedef unsigned char  UINT8;
++typedef unsigned short UINT16;
++typedef unsigned int   UINT32;
++*/
++/*typedef unsigned int   size_t;*/
++#endif
++
++#ifdef _CPHAL
++
++#ifndef TRUE
++#define TRUE (1==1)
++#endif
++
++#ifndef FALSE
++#define FALSE (1==2)
++#endif
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#endif
++
++#define        VirtToPhys(a)                 (((int)a)&~0xe0000000)
++#define        VirtToVirtNoCache(a)          ((void*)((VirtToPhys(a))|0xa0000000))
++#define        VirtToVirtCache(a)            ((void*)((VirtToPhys(a))|0x80000000))
++#define        PhysToVirtNoCache(a)          ((void*)(((int)a)|0xa0000000))
++#define        PhysToVirtCache(a)            ((void*)(((int)a)|0x80000000))
++/*
++#define        DataCacheHitInvalidate(a)     {__asm__(" cache  17, (%0)" :   : "r" (a));}
++#define        DataCacheHitWriteback(a)      {__asm__(" cache  25, (%0)" :   : "r" (a));}
++*/
++
++#define PARTIAL 1     /**< Used in @c Close() and @c ChannelTeardown() */
++#define FULL 2        /**< Used in @c Close() and @c ChannelTeardown() */
++
++/* Channel Teardown Defines */
++#define RX_TEARDOWN 2
++#define TX_TEARDOWN 1
++#define BLOCKING_TEARDOWN 8
++#define FULL_TEARDOWN 4
++#define PARTIAL_TEARDOWN 0
++
++#define MAX_DIR 2
++#define DIRECTION_TX 0
++#define DIRECTION_RX 1
++#define TX_CH 0
++#define RX_CH 1
++#define HAL_ERROR_DEVICE_NOT_FOUND    1
++#define HAL_ERROR_FAILED_MALLOC       2
++#define HAL_ERROR_OSFUNC_SIZE         3
++#define HAL_DEFAULT  0xFFFFFFFF
++#define VALID(val)    (val!=HAL_DEFAULT)
++
++/*
++ERROR REPORTING
++
++HAL Module Codes.  Each HAL module reporting an error code
++should OR the error code with the respective Module error code
++from the list below.
++*/
++#define EC_AAL5                                EC_HAL|EC_DEV_AAL5
++#define EC_AAL2                                EC_HAL|EC_DEV_AAL2
++#define EC_CPSAR                               EC_HAL|EC_DEV_CPSAR
++#define EC_CPMAC                               EC_HAL|EC_DEV_CPMAC
++#define EC_VDMA                                EC_HAL|EC_DEV_VDMA
++#define EC_VLYNQ                               EC_HAL|EC_DEV_VLYNQ
++#define EC_CPPI                                EC_HAL|EC_DEV_CPPI
++
++/*
++HAL Function Codes.  Each HAL module reporting an error code
++should OR the error code with one of the function codes from
++the list below.
++*/
++#define EC_FUNC_HAL_INIT                       EC_FUNC(1)
++#define EC_FUNC_CHSETUP                        EC_FUNC(2)
++#define EC_FUNC_CHTEARDOWN                     EC_FUNC(3)
++#define EC_FUNC_RXRETURN                       EC_FUNC(4)
++#define EC_FUNC_SEND                           EC_FUNC(5)
++#define EC_FUNC_RXINT                          EC_FUNC(6)
++#define EC_FUNC_TXINT                          EC_FUNC(7)
++#define EC_FUNC_AAL2_VDMA                      EC_FUNC(8)
++#define EC_FUNC_OPTIONS                        EC_FUNC(9)
++#define EC_FUNC_PROBE                          EC_FUNC(10)
++#define EC_FUNC_OPEN                           EC_FUNC(11)
++#define EC_FUNC_CONTROL                        EC_FUNC(12)
++#define EC_FUNC_DEVICE_INT                     EC_FUNC(13)
++#define EC_FUNC_STATUS                         EC_FUNC(14)
++#define EC_FUNC_TICK                           EC_FUNC(15)
++#define EC_FUNC_CLOSE                          EC_FUNC(16)
++#define EC_FUNC_SHUTDOWN                       EC_FUNC(17)
++#define EC_FUNC_DEVICE_INT_ALT                 EC_FUNC(18) /* +GSG 030306 */
++
++/*
++HAL Error Codes.  The list below defines every type of error
++used in all HAL modules. DO NOT CHANGE THESE VALUES!  Add new
++values in integer order to the bottom of the list.
++*/
++#define EC_VAL_PDSP_LOAD_FAIL                 EC_ERR(0x01)|EC_CRITICAL
++#define EC_VAL_FIRMWARE_TOO_LARGE             EC_ERR(0x02)|EC_CRITICAL
++#define EC_VAL_DEVICE_NOT_FOUND               EC_ERR(0x03)|EC_CRITICAL
++#define EC_VAL_BASE_ADDR_NOT_FOUND            EC_ERR(0x04)|EC_CRITICAL
++#define EC_VAL_RESET_BIT_NOT_FOUND            EC_ERR(0x05)|EC_CRITICAL
++#define EC_VAL_CH_INFO_NOT_FOUND              EC_ERR(0x06)
++#define EC_VAL_RX_STATE_RAM_NOT_CLEARED       EC_ERR(0x07)|EC_CRITICAL
++#define EC_VAL_TX_STATE_RAM_NOT_CLEARED       EC_ERR(0x08)|EC_CRITICAL
++#define EC_VAL_MALLOC_DEV_FAILED              EC_ERR(0x09)
++#define EC_VAL_OS_VERSION_NOT_SUPPORTED       EC_ERR(0x0A)|EC_CRITICAL
++#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED    EC_ERR(0x0B)|EC_CRITICAL
++#define EC_VAL_NULL_CPSAR_DEV                 EC_ERR(0x0C)|EC_CRITICAL
++
++#define EC_VAL_LUT_NOT_READY                  EC_ERR(0x0D)
++#define EC_VAL_INVALID_CH                     EC_ERR(0x0E)
++#define EC_VAL_NULL_CH_STRUCT                 EC_ERR(0x0F)
++#define EC_VAL_RX_TEARDOWN_ALREADY_PEND       EC_ERR(0x10)
++#define EC_VAL_TX_TEARDOWN_ALREADY_PEND       EC_ERR(0x11)
++#define EC_VAL_RX_CH_ALREADY_TORNDOWN         EC_ERR(0x12)
++#define EC_VAL_TX_CH_ALREADY_TORNDOWN         EC_ERR(0x13)
++#define EC_VAL_TX_TEARDOWN_TIMEOUT            EC_ERR(0x14)
++#define EC_VAL_RX_TEARDOWN_TIMEOUT            EC_ERR(0x15)
++#define EC_VAL_CH_ALREADY_TORNDOWN            EC_ERR(0x16)
++#define EC_VAL_VC_SETUP_NOT_READY             EC_ERR(0x17)
++#define EC_VAL_VC_TEARDOWN_NOT_READY          EC_ERR(0x18)
++#define EC_VAL_INVALID_VC                     EC_ERR(0x19)
++#define EC_VAL_INVALID_LC                     EC_ERR(0x20)
++#define EC_VAL_INVALID_VDMA_CH                EC_ERR(0x21)
++#define EC_VAL_INVALID_CID                    EC_ERR(0x22)
++#define EC_VAL_INVALID_UUI                    EC_ERR(0x23)
++#define EC_VAL_INVALID_UUI_DISCARD            EC_ERR(0x24)
++#define EC_VAL_CH_ALREADY_OPEN                EC_ERR(0x25)
++
++#define EC_VAL_RCB_MALLOC_FAILED              EC_ERR(0x26)
++#define EC_VAL_RX_BUFFER_MALLOC_FAILED        EC_ERR(0x27)
++#define EC_VAL_OUT_OF_TCBS                    EC_ERR(0x28)
++#define EC_VAL_NO_TCBS                        EC_ERR(0x29)
++#define EC_VAL_NULL_RCB                       EC_ERR(0x30)|EC_CRITICAL
++#define EC_VAL_SOP_ERROR                      EC_ERR(0x31)|EC_CRITICAL
++#define EC_VAL_EOP_ERROR                      EC_ERR(0x32)|EC_CRITICAL
++#define EC_VAL_NULL_TCB                       EC_ERR(0x33)|EC_CRITICAL
++#define EC_VAL_CORRUPT_RCB_CHAIN              EC_ERR(0x34)|EC_CRITICAL
++#define EC_VAL_TCB_MALLOC_FAILED              EC_ERR(0x35)
++
++#define EC_VAL_DISABLE_POLLING_FAILED         EC_ERR(0x36)
++#define EC_VAL_KEY_NOT_FOUND                  EC_ERR(0x37)
++#define EC_VAL_MALLOC_FAILED                  EC_ERR(0x38)
++#define EC_VAL_RESET_BASE_NOT_FOUND           EC_ERR(0x39)|EC_CRITICAL
++#define EC_VAL_INVALID_STATE                  EC_ERR(0x40)
++#define EC_VAL_NO_TXH_WORK_TO_DO              EC_ERR(0x41)
++#define EC_VAL_NO_TXL_WORK_TO_DO              EC_ERR(0x42)
++#define EC_VAL_NO_RX_WORK_TO_DO               EC_ERR(0x43)
++#define EC_VAL_NOT_LINKED                     EC_ERR(0x44)
++#define EC_VAL_INTERRUPT_NOT_FOUND            EC_ERR(0x45)
++#define EC_VAL_OFFSET_NOT_FOUND               EC_ERR(0x46)
++#define EC_VAL_MODULE_ALREADY_CLOSED          EC_ERR(0x47)
++#define EC_VAL_MODULE_ALREADY_SHUTDOWN        EC_ERR(0x48)
++#define EC_VAL_ACTION_NOT_FOUND               EC_ERR(0x49)
++#define EC_VAL_RX_CH_ALREADY_SETUP            EC_ERR(0x50)
++#define EC_VAL_TX_CH_ALREADY_SETUP            EC_ERR(0x51)
++#define EC_VAL_RX_CH_ALREADY_OPEN             EC_ERR(0x52)
++#define EC_VAL_TX_CH_ALREADY_OPEN             EC_ERR(0x53)
++#define EC_VAL_CH_ALREADY_SETUP               EC_ERR(0x54)
++#define EC_VAL_RCB_NEEDS_BUFFER               EC_ERR(0x55) /* +GSG 030410 */
++#define EC_VAL_RCB_DROPPED                    EC_ERR(0x56) /* +GSG 030410 */
++#define EC_VAL_INVALID_VALUE                  EC_ERR(0x57)
++
++/**
++@defgroup shared_data Shared Data Structures
++
++The data structures documented here are shared by all modules.
++*/
++
++/**
++ *  @ingroup shared_data
++ *  This is the fragment list structure.  Each fragment list entry contains a
++ *  length and a data buffer.
++ */
++typedef struct
++  {
++   bit32u   len;    /**< Length of the fragment in bytes (lower 16 bits are valid).  For SOP, upper 16 bits is the buffer offset. */
++   void     *data;  /**< Pointer to fragment data. */
++   void     *OsInfo; /**< Pointer to OS defined data. */
++  }FRAGLIST;
++
++#if defined (_CPHAL_CPMAC)
++#define CB_PASSCRC_BIT     (1<<26)
++
++/* CPMAC CPHAL STATUS */
++#define CPMAC_STATUS_LINK               (1 << 0)
++#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  /* 0 - HD, 1 - FD */
++#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  /* 0 - 10, 1 - 100 */
++
++/*   ADAPTER CHECK Codes */
++
++#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
++#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)
++#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)
++#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13)
++
++#define _CPMDIO_DISABLE                 (1 << 0)
++#define _CPMDIO_HD                      (1 << 1)
++#define _CPMDIO_FD                      (1 << 2)
++#define _CPMDIO_10                      (1 << 3)
++#define _CPMDIO_100                     (1 << 4)
++#define _CPMDIO_NEG_OFF                 (1 << 5)
++#define _CPMDIO_LOOPBK                  (1 << 16)
++#define _CPMDIO_NOPHY                   (1 << 20)
++#endif
++
++/**
++ *  @ingroup shared_data
++ *  Channel specific configuration information.  This structure should be
++ *  populated by upper-layer software prior to calling @c ChannelSetup().  Any
++ *  configuration item that can be changed on a per channel basis should
++ *  be represented here.  Each module may define this structure with additional
++ *  module-specific members.
++ */
++typedef struct
++  {
++   int Channel;        /**< Channel number. */
++   int Direction;      /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
++   OS_SETUP *OsSetup;  /**< OS defined information associated with this channel. */
++
++#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
++   int RxBufSize;      /**< Size (in bytes) for each Rx buffer.*/
++   int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
++   int RxNumBuffers;   /**< The number of Rx buffer descriptors to allocate for Ch. */
++   int RxServiceMax;   /**< Maximum number of packets to service at one time. */
++
++   int TxNumBuffers;   /**< The number of Tx buffer descriptors to allocate for Ch. */
++   int TxNumQueues;    /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
++   int TxServiceMax;   /**< Maximum number of packets to service at one time. */
++#endif
++
++#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++   int CpcsUU;      /**< The 2-byte CPCS UU and CPI information. */
++   int Gfc;         /**< Generic Flow Control. */
++   int Clp;         /**< Cell Loss Priority. */
++   int Pti;         /**< Payload Type Indication. */
++#endif
++
++#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++   int DaMask;      /**< Specifies whether credit issuance is paused when Tx data not available. */
++   int Priority;    /**< Priority bin this channel will be scheduled within. */
++   int PktType;     /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
++   int Vci;         /**< Virtual Channel Identifier. */
++   int Vpi;         /**< Virtual Path Identifier. */
++   int FwdUnkVc;    /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
++
++   /* Tx VC State */
++   int TxVc_CellRate;  /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
++   int TxVc_QosType;   /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
++   int TxVc_Mbs;       /**< Min Burst Size in cells.*/
++   int TxVc_Pcr;       /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
++
++   bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
++   int TxVc_OamTc;     /**< TC Path to transmit OAM cells for TX connection (0,1). */
++   int TxVc_VpOffset;  /**< Offset to the OAM VP state table. */
++   /* Rx VC State */
++   int RxVc_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
++   int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
++   bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
++   int RxVc_OamTc;     /**< TC Path to transmit OAM cells for RX connection (0,1). */
++   int RxVc_VpOffset;  /**< Offset to the OAM VP state table. */
++   /* Tx VP State */
++   int TxVp_OamTc;     /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
++   bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
++   /* Rx VP State  */
++   int RxVp_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
++   int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
++   bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
++   int RxVp_OamTc;     /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
++   int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
++#endif
++
++
++#ifdef _CPHAL_VDMAVT
++   bit32u RemFifoAddr; /* Mirror mode only. */
++   bit32u FifoAddr;
++   bit32  PollInt;
++   bit32  FifoSize;
++   int    Ready;
++#endif
++
++  }CHANNEL_INFO;
++
++/*
++ *  This structure contains each statistic value gathered by the CPHAL.
++ *  Applications may access statistics data by using the @c StatsGet() routine.
++ */
++/* STATS */
++#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++typedef struct
++  {
++   bit32u CrcErrors[16];
++   bit32u LenErrors[16];
++   bit32u DmaLenErrors[16];
++   bit32u AbortErrors[16];
++   bit32u StarvErrors[16];
++   bit32u TxMisQCnt[16][2];
++   bit32u RxMisQCnt[16];
++   bit32u RxEOQCnt[16];
++   bit32u TxEOQCnt[16][2];
++   bit32u RxPacketsServiced[16];
++   bit32u TxPacketsServiced[16][2];
++   bit32u RxMaxServiced;
++   bit32u TxMaxServiced[16][2];
++   bit32u RxTotal;
++   bit32u TxTotal;
++  } STAT_INFO;
++#endif
++
++/*
++ *  VDMA Channel specific configuration information
++ */
++#ifdef _CPHAL_AAL2
++typedef struct
++  {
++   int Ch;           /**< Channel Number */
++   int RemoteEndian; /**< Endianness of remote VDMA-VT device */
++   int CpsSwap;      /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device.  When 1, in MS byte. */
++  }VdmaChInfo;
++#endif
++
++#ifndef _CPHAL
++  typedef void HAL_DEVICE;
++  typedef void HAL_PRIVATE;
++  typedef void HAL_RCB;
++  typedef void HAL_RECEIVEINFO;
++#endif
++
++/**
++ *  @ingroup shared_data
++ *  The HAL_FUNCTIONS struct defines the function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to xxxInitModule().
++ */
++typedef struct
++  {
++  int  (*ChannelSetup)    (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
++  int  (*Close)           (HAL_DEVICE *HalDev, int Mode);
++  int  (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
++  int  (*Init)            (HAL_DEVICE *HalDev);
++  int  (*Open)            (HAL_DEVICE *HalDev);
++  int  (*PacketProcessEnd) (HAL_DEVICE *HalDev);
++  int  (*Probe)           (HAL_DEVICE *HalDev);
++  int  (*RxReturn)        (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
++  int  (*Send)            (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
++  int  (*Shutdown)        (HAL_DEVICE *HalDev);
++  int  (*Tick)            (HAL_DEVICE *HalDev);
++
++#ifdef _CPHAL_AAL5
++  int  (*Kick) (HAL_DEVICE *HalDev, int Queue);
++  void (*OamFuncConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig);
++  void (*OamLoopbackConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  STAT_INFO*  (*StatsGetOld)(HAL_DEVICE *HalDev);
++#endif
++  } HAL_FUNCTIONS;
++
++/**
++ *  @ingroup shared_data
++ *  The OS_FUNCTIONS struct defines the function pointers for all upper layer
++ *  functions accessible to the CPHAL.  The upper layer software is responsible
++ *  for providing the correct OS-specific implementations for the following
++ *  functions. It is populated by calling InitModule() (done by the CPHAL in
++ *  xxxInitModule().
++ */
++typedef struct
++  {
++  int   (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
++  void  (*CriticalOn)(void);
++  void  (*CriticalOff)(void);
++  void  (*DataCacheHitInvalidate)(void *MemPtr, int Size);
++  void  (*DataCacheHitWriteback)(void *MemPtr, int Size);
++  int   (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
++  int   (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
++  int   (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
++  void  (*Free)(void *MemPtr);
++  void  (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
++  void  (*FreeDev)(void *MemPtr);
++  void  (*FreeDmaXfer)(void *MemPtr);
++  void  (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
++  void  (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
++  void* (*Malloc)(bit32u size);
++  void* (*MallocDev)(bit32u Size);
++  void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
++  void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
++                       OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
++                       OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
++  void* (*Memset)(void *Dest, int C, bit32u N);
++  int   (*Printf)(const char *Format, ...);
++  int   (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
++                 bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
++  int   (*SendComplete)(OS_SENDINFO *OsSendInfo);
++  int   (*Sprintf)(char *S, const char *Format, ...);
++  int   (*Strcmpi)(const char *Str1, const char *Str2);
++  unsigned int (*Strlen)(const char *S);
++  char* (*Strstr)(const char *S1, const char *S2);
++  unsigned long  (*Strtoul)(const char *Str, char **Endptr, int Base);
++  void  (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
++  } OS_FUNCTIONS;
++
++/************** MODULE SPECIFIC STUFF BELOW **************/
++
++#ifdef _CPHAL_CPMAC
++
++/*
++int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
++*/
++
++int halCpmacInitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 HAL_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_AAL5
++/*
++ *  @ingroup shared_data
++ *  The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to cphalInitModule().
++ */
++/*
++typedef struct
++  {
++  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
++  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
++  int  (*Init)(HAL_DEVICE *HalDev);
++  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
++  int  (*Open)(HAL_DEVICE *HalDev);
++  int  (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
++  int  (*Probe)(HAL_DEVICE *HalDev);
++  int  (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
++  int  (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
++                 int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
++                 bit32u Mode);
++  int  (*StatsClear)(HAL_DEVICE *HalDev);
++  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
++  int  (*Status)(HAL_DEVICE *HalDev);
++  void (*Tick)(HAL_DEVICE *HalDev);
++  int  (*Kick)(HAL_DEVICE *HalDev, int Queue);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  } AAL5_FUNCTIONS;
++*/
++
++int cpaal5InitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 HAL_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_AAL2
++/**
++ *  @ingroup shared_data
++ *  The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to cphalInitModule().
++ */
++typedef struct
++  {
++  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
++  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
++  int  (*Init)(HAL_DEVICE *HalDev);
++  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
++  int  (*Open)(HAL_DEVICE *HalDev);
++  int  (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
++  int  (*Probe)(HAL_DEVICE *HalDev);
++
++  int  (*StatsClear)(HAL_DEVICE *HalDev);
++  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
++  int  (*Status)(HAL_DEVICE *HalDev);
++  void (*Tick)(HAL_DEVICE *HalDev);
++  int  (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
++                                    int VdmaCh, int UUIDiscard);
++  int  (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
++                                   int LC);
++  int  (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
++  int  (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
++                               VdmaChInfo *VdmaCh);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  int  (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
++                           int RxMultiMode, int TxMultiMode, int SchedMode,
++                           int TcCh);
++  void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
++  int  (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
++  } AAL2_FUNCTIONS;
++
++int cpaal2InitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 AAL2_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_VDMAVT
++/**
++ *  @ingroup shared_data
++ *  The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to InitModule().
++ *
++ *  Note that this list is still under definition.
++ */
++typedef struct
++  {
++  bit32  (*Init)( HAL_DEVICE *VdmaVtDev);
++    /*  bit32  (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
++                  bit32u Addr, bit32u Size, bit32u PollInt);
++    bit32  (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
++                  bit32u Addr, bit32u Size, bit32u PollInt); */
++  bit32  (*Tx)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Rx)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
++                         bit32u RemDevID);
++  bit32  (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Open)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Close)(HAL_DEVICE *VdmaVtDev);
++  int    (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
++  int    (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int    (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
++  int    (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
++                 int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
++  } VDMA_FUNCTIONS;
++
++int VdmaInitModule(HAL_DEVICE **VdmaVt,
++                 OS_DEVICE *OsDev,
++                 VDMA_FUNCTIONS **VdmaVtFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++/*
++extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
++                      int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
++                      int *Size, int Inst);
++*/
++
++
++#ifdef _CPHAL_AAL5
++extern const char hcSarFrequency[];
++#endif
++
++#ifdef _CPHAL_CPMAC
++/* following will be common, once 'utl' added */
++extern const char hcClear[];
++extern const char hcGet[];
++extern const char hcSet[];
++extern const char hcTick[];
++
++extern const char hcCpuFrequency[];
++extern const char hcCpmacFrequency[];
++extern const char hcMdioBusFrequency[];
++extern const char hcMdioClockFrequency[];
++extern const char hcCpmacBase[];
++extern const char hcPhyNum[];
++extern const char hcSize[];
++extern const char hcCpmacSize[];
++extern const char hcPhyAccess[];
++#endif
++
++#endif  /*  end of _INC_    */
+diff -urN linux.old/drivers/atm/sangam_atm/cpswhal_cpsar.h linux.dev/drivers/atm/sangam_atm/cpswhal_cpsar.h
+--- linux.old/drivers/atm/sangam_atm/cpswhal_cpsar.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/cpswhal_cpsar.h	2005-08-23 04:46:50.089844912 +0200
+@@ -0,0 +1,629 @@
++/************************************************************************
++ *  TNETDxxxx Software Support
++ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
++ *
++ *  FILE: cphal.h
++ *
++ *  DESCRIPTION:
++ *      User include file, contains data definitions shared between the CPHAL
++ *      and the upper-layer software.
++ *
++ *  HISTORY:
++ *      Date      Modifier  Ver    Notes
++ *      28Feb02   Greg      1.00   Original
++ *      06Mar02   Greg      1.01   Documentation enhanced
++ *      18Jul02   Greg      1.02   Many updates (OAM additions, general reorg)
++ *      22Nov02   Mick      RC2    Additions from Denis' input on Control
++ *
++ *  author  Greg Guyotte
++ *  version 1.02
++ *  date    18-Jul-2002
++ *****************************************************************************/
++#ifndef _INC_CPHAL_H
++#define _INC_CPHAL_H
++
++#ifdef _CPHAL_CPMAC
++#include "ec_errors_cpmac.h"
++#endif
++
++#ifdef _CPHAL_AAL5
++#include "ec_errors_cpaal5.h"
++#endif
++
++#ifdef _CPHAL_CPSAR
++#include "ec_errors_cpsar.h"
++#endif
++
++#ifdef _CPHAL_AAL2
++#include "ec_errors_cpaal2.h"
++#endif
++
++#ifndef __ADAM2
++typedef char           bit8;
++typedef short          bit16;
++typedef int            bit32;
++
++typedef unsigned char  bit8u;
++typedef unsigned short bit16u;
++typedef unsigned int   bit32u;
++
++/*
++typedef char           INT8;
++typedef short          INT16;
++typedef int            INT32;
++typedef unsigned char  UINT8;
++typedef unsigned short UINT16;
++typedef unsigned int   UINT32;
++*/
++/*typedef unsigned int   size_t;*/
++#endif
++
++#ifdef _CPHAL
++
++#ifndef TRUE
++#define TRUE (1==1)
++#endif
++
++#ifndef FALSE
++#define FALSE (1==2)
++#endif
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#endif
++
++#define        VirtToPhys(a)                 (((int)a)&~0xe0000000)
++#define        VirtToVirtNoCache(a)          ((void*)((VirtToPhys(a))|0xa0000000))
++#define        VirtToVirtCache(a)            ((void*)((VirtToPhys(a))|0x80000000))
++#define        PhysToVirtNoCache(a)          ((void*)(((int)a)|0xa0000000))
++#define        PhysToVirtCache(a)            ((void*)(((int)a)|0x80000000))
++/*
++#define        DataCacheHitInvalidate(a)     {__asm__(" cache  17, (%0)" :   : "r" (a));}
++#define        DataCacheHitWriteback(a)      {__asm__(" cache  25, (%0)" :   : "r" (a));}
++*/
++
++#define PARTIAL 1     /**< Used in @c Close() and @c ChannelTeardown() */
++#define FULL 2        /**< Used in @c Close() and @c ChannelTeardown() */
++
++/* Channel Teardown Defines */
++#define RX_TEARDOWN 2
++#define TX_TEARDOWN 1
++#define BLOCKING_TEARDOWN 8
++#define FULL_TEARDOWN 4
++#define PARTIAL_TEARDOWN 0
++
++#define MAX_DIR 2
++#define DIRECTION_TX 0
++#define DIRECTION_RX 1
++#define TX_CH 0
++#define RX_CH 1
++#define HAL_ERROR_DEVICE_NOT_FOUND    1
++#define HAL_ERROR_FAILED_MALLOC       2
++#define HAL_ERROR_OSFUNC_SIZE         3
++#define HAL_DEFAULT  0xFFFFFFFF
++#define VALID(val)    (val!=HAL_DEFAULT)
++
++/*
++ERROR REPORTING
++
++HAL Module Codes.  Each HAL module reporting an error code
++should OR the error code with the respective Module error code
++from the list below.
++*/
++#define EC_AAL5                                EC_HAL|EC_DEV_AAL5
++#define EC_AAL2                                EC_HAL|EC_DEV_AAL2
++#define EC_CPSAR                               EC_HAL|EC_DEV_CPSAR
++#define EC_CPMAC                               EC_HAL|EC_DEV_CPMAC
++#define EC_VDMA                                EC_HAL|EC_DEV_VDMA
++#define EC_VLYNQ                               EC_HAL|EC_DEV_VLYNQ
++#define EC_CPPI                                EC_HAL|EC_DEV_CPPI
++
++/*
++HAL Function Codes.  Each HAL module reporting an error code
++should OR the error code with one of the function codes from
++the list below.
++*/
++#define EC_FUNC_HAL_INIT                       EC_FUNC(1)
++#define EC_FUNC_CHSETUP                        EC_FUNC(2)
++#define EC_FUNC_CHTEARDOWN                     EC_FUNC(3)
++#define EC_FUNC_RXRETURN                       EC_FUNC(4)
++#define EC_FUNC_SEND                           EC_FUNC(5)
++#define EC_FUNC_RXINT                          EC_FUNC(6)
++#define EC_FUNC_TXINT                          EC_FUNC(7)
++#define EC_FUNC_AAL2_VDMA                      EC_FUNC(8)
++#define EC_FUNC_OPTIONS                        EC_FUNC(9)
++#define EC_FUNC_PROBE                          EC_FUNC(10)
++#define EC_FUNC_OPEN                           EC_FUNC(11)
++#define EC_FUNC_CONTROL                        EC_FUNC(12)
++#define EC_FUNC_DEVICE_INT                     EC_FUNC(13)
++#define EC_FUNC_STATUS                         EC_FUNC(14)
++#define EC_FUNC_TICK                           EC_FUNC(15)
++#define EC_FUNC_CLOSE                          EC_FUNC(16)
++#define EC_FUNC_SHUTDOWN                       EC_FUNC(17)
++#define EC_FUNC_DEVICE_INT_ALT                 EC_FUNC(18) /* +GSG 030306 */
++
++/*
++HAL Error Codes.  The list below defines every type of error
++used in all HAL modules. DO NOT CHANGE THESE VALUES!  Add new
++values in integer order to the bottom of the list.
++*/
++#define EC_VAL_PDSP_LOAD_FAIL                 EC_ERR(0x01)|EC_CRITICAL
++#define EC_VAL_FIRMWARE_TOO_LARGE             EC_ERR(0x02)|EC_CRITICAL
++#define EC_VAL_DEVICE_NOT_FOUND               EC_ERR(0x03)|EC_CRITICAL
++#define EC_VAL_BASE_ADDR_NOT_FOUND            EC_ERR(0x04)|EC_CRITICAL
++#define EC_VAL_RESET_BIT_NOT_FOUND            EC_ERR(0x05)|EC_CRITICAL
++#define EC_VAL_CH_INFO_NOT_FOUND              EC_ERR(0x06)
++#define EC_VAL_RX_STATE_RAM_NOT_CLEARED       EC_ERR(0x07)|EC_CRITICAL
++#define EC_VAL_TX_STATE_RAM_NOT_CLEARED       EC_ERR(0x08)|EC_CRITICAL
++#define EC_VAL_MALLOC_DEV_FAILED              EC_ERR(0x09)
++#define EC_VAL_OS_VERSION_NOT_SUPPORTED       EC_ERR(0x0A)|EC_CRITICAL
++#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED    EC_ERR(0x0B)|EC_CRITICAL
++#define EC_VAL_NULL_CPSAR_DEV                 EC_ERR(0x0C)|EC_CRITICAL
++
++#define EC_VAL_LUT_NOT_READY                  EC_ERR(0x0D)
++#define EC_VAL_INVALID_CH                     EC_ERR(0x0E)
++#define EC_VAL_NULL_CH_STRUCT                 EC_ERR(0x0F)
++#define EC_VAL_RX_TEARDOWN_ALREADY_PEND       EC_ERR(0x10)
++#define EC_VAL_TX_TEARDOWN_ALREADY_PEND       EC_ERR(0x11)
++#define EC_VAL_RX_CH_ALREADY_TORNDOWN         EC_ERR(0x12)
++#define EC_VAL_TX_CH_ALREADY_TORNDOWN         EC_ERR(0x13)
++#define EC_VAL_TX_TEARDOWN_TIMEOUT            EC_ERR(0x14)
++#define EC_VAL_RX_TEARDOWN_TIMEOUT            EC_ERR(0x15)
++#define EC_VAL_CH_ALREADY_TORNDOWN            EC_ERR(0x16)
++#define EC_VAL_VC_SETUP_NOT_READY             EC_ERR(0x17)
++#define EC_VAL_VC_TEARDOWN_NOT_READY          EC_ERR(0x18)
++#define EC_VAL_INVALID_VC                     EC_ERR(0x19)
++#define EC_VAL_INVALID_LC                     EC_ERR(0x20)
++#define EC_VAL_INVALID_VDMA_CH                EC_ERR(0x21)
++#define EC_VAL_INVALID_CID                    EC_ERR(0x22)
++#define EC_VAL_INVALID_UUI                    EC_ERR(0x23)
++#define EC_VAL_INVALID_UUI_DISCARD            EC_ERR(0x24)
++#define EC_VAL_CH_ALREADY_OPEN                EC_ERR(0x25)
++
++#define EC_VAL_RCB_MALLOC_FAILED              EC_ERR(0x26)
++#define EC_VAL_RX_BUFFER_MALLOC_FAILED        EC_ERR(0x27)
++#define EC_VAL_OUT_OF_TCBS                    EC_ERR(0x28)
++#define EC_VAL_NO_TCBS                        EC_ERR(0x29)
++#define EC_VAL_NULL_RCB                       EC_ERR(0x30)|EC_CRITICAL
++#define EC_VAL_SOP_ERROR                      EC_ERR(0x31)|EC_CRITICAL
++#define EC_VAL_EOP_ERROR                      EC_ERR(0x32)|EC_CRITICAL
++#define EC_VAL_NULL_TCB                       EC_ERR(0x33)|EC_CRITICAL
++#define EC_VAL_CORRUPT_RCB_CHAIN              EC_ERR(0x34)|EC_CRITICAL
++#define EC_VAL_TCB_MALLOC_FAILED              EC_ERR(0x35)
++
++#define EC_VAL_DISABLE_POLLING_FAILED         EC_ERR(0x36)
++#define EC_VAL_KEY_NOT_FOUND                  EC_ERR(0x37)
++#define EC_VAL_MALLOC_FAILED                  EC_ERR(0x38)
++#define EC_VAL_RESET_BASE_NOT_FOUND           EC_ERR(0x39)|EC_CRITICAL
++#define EC_VAL_INVALID_STATE                  EC_ERR(0x40)
++#define EC_VAL_NO_TXH_WORK_TO_DO              EC_ERR(0x41)
++#define EC_VAL_NO_TXL_WORK_TO_DO              EC_ERR(0x42)
++#define EC_VAL_NO_RX_WORK_TO_DO               EC_ERR(0x43)
++#define EC_VAL_NOT_LINKED                     EC_ERR(0x44)
++#define EC_VAL_INTERRUPT_NOT_FOUND            EC_ERR(0x45)
++#define EC_VAL_OFFSET_NOT_FOUND               EC_ERR(0x46)
++#define EC_VAL_MODULE_ALREADY_CLOSED          EC_ERR(0x47)
++#define EC_VAL_MODULE_ALREADY_SHUTDOWN        EC_ERR(0x48)
++#define EC_VAL_ACTION_NOT_FOUND               EC_ERR(0x49)
++#define EC_VAL_RX_CH_ALREADY_SETUP            EC_ERR(0x50)
++#define EC_VAL_TX_CH_ALREADY_SETUP            EC_ERR(0x51)
++#define EC_VAL_RX_CH_ALREADY_OPEN             EC_ERR(0x52)
++#define EC_VAL_TX_CH_ALREADY_OPEN             EC_ERR(0x53)
++#define EC_VAL_CH_ALREADY_SETUP               EC_ERR(0x54)
++#define EC_VAL_RCB_NEEDS_BUFFER               EC_ERR(0x55) /* +GSG 030410 */
++#define EC_VAL_RCB_DROPPED                    EC_ERR(0x56) /* +GSG 030410 */
++#define EC_VAL_INVALID_VALUE                  EC_ERR(0x57)
++
++/**
++@defgroup shared_data Shared Data Structures
++
++The data structures documented here are shared by all modules.
++*/
++
++/**
++ *  @ingroup shared_data
++ *  This is the fragment list structure.  Each fragment list entry contains a
++ *  length and a data buffer.
++ */
++typedef struct
++  {
++   bit32u   len;    /**< Length of the fragment in bytes (lower 16 bits are valid).  For SOP, upper 16 bits is the buffer offset. */
++   void     *data;  /**< Pointer to fragment data. */
++   void     *OsInfo; /**< Pointer to OS defined data. */
++  }FRAGLIST;
++
++#if defined (_CPHAL_CPMAC)
++#define CB_PASSCRC_BIT     (1<<26)
++
++/* CPMAC CPHAL STATUS */
++#define CPMAC_STATUS_LINK               (1 << 0)
++#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  /* 0 - HD, 1 - FD */
++#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  /* 0 - 10, 1 - 100 */
++
++/*   ADAPTER CHECK Codes */
++
++#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
++#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)
++#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)
++#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13)
++
++#define _CPMDIO_DISABLE                 (1 << 0)
++#define _CPMDIO_HD                      (1 << 1)
++#define _CPMDIO_FD                      (1 << 2)
++#define _CPMDIO_10                      (1 << 3)
++#define _CPMDIO_100                     (1 << 4)
++#define _CPMDIO_NEG_OFF                 (1 << 5)
++#define _CPMDIO_LOOPBK                  (1 << 16)
++#define _CPMDIO_NOPHY                   (1 << 20)
++#endif
++
++/**
++ *  @ingroup shared_data
++ *  Channel specific configuration information.  This structure should be
++ *  populated by upper-layer software prior to calling @c ChannelSetup().  Any
++ *  configuration item that can be changed on a per channel basis should
++ *  be represented here.  Each module may define this structure with additional
++ *  module-specific members.
++ */
++typedef struct
++  {
++   int Channel;        /**< Channel number. */
++   int Direction;      /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
++   OS_SETUP *OsSetup;  /**< OS defined information associated with this channel. */
++
++#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
++   int RxBufSize;      /**< Size (in bytes) for each Rx buffer.*/
++   int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
++   int RxNumBuffers;   /**< The number of Rx buffer descriptors to allocate for Ch. */
++   int RxServiceMax;   /**< Maximum number of packets to service at one time. */
++
++   int TxNumBuffers;   /**< The number of Tx buffer descriptors to allocate for Ch. */
++   int TxNumQueues;    /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
++   int TxServiceMax;   /**< Maximum number of packets to service at one time. */
++#endif
++
++#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++   int CpcsUU;      /**< The 2-byte CPCS UU and CPI information. */
++   int Gfc;         /**< Generic Flow Control. */
++   int Clp;         /**< Cell Loss Priority. */
++   int Pti;         /**< Payload Type Indication. */
++#endif
++
++#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++   int DaMask;      /**< Specifies whether credit issuance is paused when Tx data not available. */
++   int Priority;    /**< Priority bin this channel will be scheduled within. */
++   int PktType;     /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
++   int Vci;         /**< Virtual Channel Identifier. */
++   int Vpi;         /**< Virtual Path Identifier. */
++   int FwdUnkVc;    /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
++
++   /* Tx VC State */
++   int TxVc_CellRate;  /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
++   int TxVc_QosType;   /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
++   int TxVc_Mbs;       /**< Min Burst Size in cells.*/
++   int TxVc_Pcr;       /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
++
++   bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
++   int TxVc_OamTc;     /**< TC Path to transmit OAM cells for TX connection (0,1). */
++   int TxVc_VpOffset;  /**< Offset to the OAM VP state table. */
++   /* Rx VC State */
++   int RxVc_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
++   int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
++   bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
++   int RxVc_OamTc;     /**< TC Path to transmit OAM cells for RX connection (0,1). */
++   int RxVc_VpOffset;  /**< Offset to the OAM VP state table. */
++   /* Tx VP State */
++   int TxVp_OamTc;     /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
++   bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
++   /* Rx VP State  */
++   int RxVp_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
++   int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
++   bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
++   int RxVp_OamTc;     /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
++   int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
++#endif
++
++
++#ifdef _CPHAL_VDMAVT
++   bit32u RemFifoAddr; /* Mirror mode only. */
++   bit32u FifoAddr;
++   bit32  PollInt;
++   bit32  FifoSize;
++   int    Ready;
++#endif
++
++  }CHANNEL_INFO;
++
++/*
++ *  This structure contains each statistic value gathered by the CPHAL.
++ *  Applications may access statistics data by using the @c StatsGet() routine.
++ */
++/* STATS */
++#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
++typedef struct
++  {
++   bit32u CrcErrors[16];
++   bit32u LenErrors[16];
++   bit32u DmaLenErrors[16];
++   bit32u AbortErrors[16];
++   bit32u StarvErrors[16];
++   bit32u TxMisQCnt[16][2];
++   bit32u RxMisQCnt[16];
++   bit32u RxEOQCnt[16];
++   bit32u TxEOQCnt[16][2];
++   bit32u RxPacketsServiced[16];
++   bit32u TxPacketsServiced[16][2];
++   bit32u RxMaxServiced;
++   bit32u TxMaxServiced[16][2];
++   bit32u RxTotal;
++   bit32u TxTotal;
++  } STAT_INFO;
++#endif
++
++/*
++ *  VDMA Channel specific configuration information
++ */
++#ifdef _CPHAL_AAL2
++typedef struct
++  {
++   int Ch;           /**< Channel Number */
++   int RemoteEndian; /**< Endianness of remote VDMA-VT device */
++   int CpsSwap;      /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device.  When 1, in MS byte. */
++  }VdmaChInfo;
++#endif
++
++#ifndef _CPHAL
++  typedef void HAL_DEVICE;
++  typedef void HAL_PRIVATE;
++  typedef void HAL_RCB;
++  typedef void HAL_RECEIVEINFO;
++#endif
++
++/**
++ *  @ingroup shared_data
++ *  The HAL_FUNCTIONS struct defines the function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to xxxInitModule().
++ */
++typedef struct
++  {
++  int  (*ChannelSetup)    (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
++  int  (*Close)           (HAL_DEVICE *HalDev, int Mode);
++  int  (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
++  int  (*Init)            (HAL_DEVICE *HalDev);
++  int  (*Open)            (HAL_DEVICE *HalDev);
++  int  (*PacketProcessEnd) (HAL_DEVICE *HalDev);
++  int  (*Probe)           (HAL_DEVICE *HalDev);
++  int  (*RxReturn)        (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
++  int  (*Send)            (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
++  int  (*Shutdown)        (HAL_DEVICE *HalDev);
++  int  (*Tick)            (HAL_DEVICE *HalDev);
++
++#ifdef _CPHAL_AAL5
++  int  (*Kick) (HAL_DEVICE *HalDev, int Queue);
++  void (*OamFuncConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig);
++  void (*OamLoopbackConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  STAT_INFO*  (*StatsGetOld)(HAL_DEVICE *HalDev);
++#endif
++  } HAL_FUNCTIONS;
++
++/**
++ *  @ingroup shared_data
++ *  The OS_FUNCTIONS struct defines the function pointers for all upper layer
++ *  functions accessible to the CPHAL.  The upper layer software is responsible
++ *  for providing the correct OS-specific implementations for the following
++ *  functions. It is populated by calling InitModule() (done by the CPHAL in
++ *  xxxInitModule().
++ */
++typedef struct
++  {
++  int   (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
++  void  (*CriticalOn)(void);
++  void  (*CriticalOff)(void);
++  void  (*DataCacheHitInvalidate)(void *MemPtr, int Size);
++  void  (*DataCacheHitWriteback)(void *MemPtr, int Size);
++  int   (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
++  int   (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
++  int   (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
++  void  (*Free)(void *MemPtr);
++  void  (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
++  void  (*FreeDev)(void *MemPtr);
++  void  (*FreeDmaXfer)(void *MemPtr);
++  void  (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
++  void  (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
++  void* (*Malloc)(bit32u size);
++  void* (*MallocDev)(bit32u Size);
++  void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
++  void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
++                       OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
++                       OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
++  void* (*Memset)(void *Dest, int C, bit32u N);
++  int   (*Printf)(const char *Format, ...);
++  int   (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
++                 bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
++  int   (*SendComplete)(OS_SENDINFO *OsSendInfo);
++  int   (*Sprintf)(char *S, const char *Format, ...);
++  int   (*Strcmpi)(const char *Str1, const char *Str2);
++  unsigned int (*Strlen)(const char *S);
++  char* (*Strstr)(const char *S1, const char *S2);
++  unsigned long  (*Strtoul)(const char *Str, char **Endptr, int Base);
++  void  (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
++  } OS_FUNCTIONS;
++
++/************** MODULE SPECIFIC STUFF BELOW **************/
++
++#ifdef _CPHAL_CPMAC
++
++/*
++int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
++*/
++
++int halCpmacInitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 HAL_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_AAL5
++/*
++ *  @ingroup shared_data
++ *  The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to cphalInitModule().
++ */
++/*
++typedef struct
++  {
++  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
++  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
++  int  (*Init)(HAL_DEVICE *HalDev);
++  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
++  int  (*Open)(HAL_DEVICE *HalDev);
++  int  (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
++  int  (*Probe)(HAL_DEVICE *HalDev);
++  int  (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
++  int  (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
++                 int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
++                 bit32u Mode);
++  int  (*StatsClear)(HAL_DEVICE *HalDev);
++  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
++  int  (*Status)(HAL_DEVICE *HalDev);
++  void (*Tick)(HAL_DEVICE *HalDev);
++  int  (*Kick)(HAL_DEVICE *HalDev, int Queue);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  } AAL5_FUNCTIONS;
++*/
++
++int cpaal5InitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 HAL_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_AAL2
++/**
++ *  @ingroup shared_data
++ *  The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to cphalInitModule().
++ */
++typedef struct
++  {
++  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
++  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
++  int  (*Init)(HAL_DEVICE *HalDev);
++  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
++  int  (*Open)(HAL_DEVICE *HalDev);
++  int  (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
++  int  (*Probe)(HAL_DEVICE *HalDev);
++
++  int  (*StatsClear)(HAL_DEVICE *HalDev);
++  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
++  int  (*Status)(HAL_DEVICE *HalDev);
++  void (*Tick)(HAL_DEVICE *HalDev);
++  int  (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
++                                    int VdmaCh, int UUIDiscard);
++  int  (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
++                                   int LC);
++  int  (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
++  int  (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
++                               VdmaChInfo *VdmaCh);
++  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
++  int  (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
++                           int RxMultiMode, int TxMultiMode, int SchedMode,
++                           int TcCh);
++  void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
++  int  (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
++  } AAL2_FUNCTIONS;
++
++int cpaal2InitModule(HAL_DEVICE **HalDev,
++                 OS_DEVICE *OsDev,
++                 AAL2_FUNCTIONS **HalFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++#ifdef _CPHAL_VDMAVT
++/**
++ *  @ingroup shared_data
++ *  The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
++ *  software.  The upper layer software receives these pointers through the
++ *  call to InitModule().
++ *
++ *  Note that this list is still under definition.
++ */
++typedef struct
++  {
++  bit32  (*Init)( HAL_DEVICE *VdmaVtDev);
++    /*  bit32  (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
++                  bit32u Addr, bit32u Size, bit32u PollInt);
++    bit32  (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
++                  bit32u Addr, bit32u Size, bit32u PollInt); */
++  bit32  (*Tx)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Rx)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
++                         bit32u RemDevID);
++  bit32  (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Open)(HAL_DEVICE *VdmaVtDev);
++  bit32  (*Close)(HAL_DEVICE *VdmaVtDev);
++  int    (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
++  int    (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
++  int    (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
++  int    (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
++                 int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
++  } VDMA_FUNCTIONS;
++
++int VdmaInitModule(HAL_DEVICE **VdmaVt,
++                 OS_DEVICE *OsDev,
++                 VDMA_FUNCTIONS **VdmaVtFunc,
++                 OS_FUNCTIONS *OsFunc,
++                 int OsFuncSize,
++                 int *HalFuncSize,
++                 int Inst);
++#endif
++
++/*
++extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
++                      int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
++                      int *Size, int Inst);
++*/
++
++
++#ifdef _CPHAL_AAL5
++extern const char hcSarFrequency[];
++#endif
++
++#ifdef _CPHAL_CPMAC
++/* following will be common, once 'utl' added */
++extern const char hcClear[];
++extern const char hcGet[];
++extern const char hcSet[];
++extern const char hcTick[];
++
++extern const char hcCpuFrequency[];
++extern const char hcCpmacFrequency[];
++extern const char hcMdioBusFrequency[];
++extern const char hcMdioClockFrequency[];
++extern const char hcCpmacBase[];
++extern const char hcPhyNum[];
++extern const char hcSize[];
++extern const char hcCpmacSize[];
++extern const char hcPhyAccess[];
++#endif
++
++#endif  /*  end of _INC_    */
+diff -urN linux.old/drivers/atm/sangam_atm/dev_host_interface.h linux.dev/drivers/atm/sangam_atm/dev_host_interface.h
+--- linux.old/drivers/atm/sangam_atm/dev_host_interface.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dev_host_interface.h	2005-08-23 04:46:50.091844608 +0200
+@@ -0,0 +1,1162 @@
++#ifndef __DEV_HOST_INTERFACE_H__
++#define __DEV_HOST_INTERFACE_H__ 1
++
++/*******************************************************************************
++*  FILE PURPOSE: Public header file for the Host-to-DSP interface
++********************************************************************************
++*
++*  TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
++*
++*  (C) Copyright Texas Instruments Inc. 2002.  All rights reserved.
++*
++*  Property of Texas Instruments Incorporated
++*
++*  Restricted Rights - Use, duplication, or disclosure is subject to
++*  restrictions set forth in TI's program license agreement and
++*  associated documentation
++*
++*
++*  FILE NAME: dev_host_interface.h
++*
++*  DESCRIPTION:
++*       This header file defines the variables and parameters used between the
++*       host processor and the DSP.  This file is included in both the DSP
++*       software and the host software.
++*
++*  RULES FOR MODIFICATION AND USE OF THIS FILE:
++*
++*  --The main pointer to the struct of pointers will always be at the same fixed
++*      location (0x80000000).
++*
++*  --Each pointer element in the struct of pointers (indicated by the main pointer)
++*      will always point to a struct only.
++*
++*  --Any new structures added to the host interface in subsequent versions must
++*      each have a corresponding new pointer element added to the END of the struct
++*      of pointers.  Other than this, there will never be any moving or rearranging
++*      of the pointer elements in the struct of pointers.
++*
++*  --Any new elements added to existing structures will be added at the END of the
++*      structure.  Other than this, there will never be any moving or rearranging
++*      of structure elements.
++*
++*  --A new structure will never be added as a new element in an old structure.
++*      New structures must be added separately with a new entry in the struct of
++*      pointers, as noted above.
++*
++*  --Also, the sizes of existing arrays within old structures will never be changed.
++*
++*  --The modem code in the DSP will never reference the struct of pointers in order
++*      to avoid aliasing issues in the DSP code.  The modem code will only use the
++*      specific structures directly.
++*
++*  --The host processor never accesses the DSP side of the ATM-TC hardware directly.
++*      The DSP interfaces directly to the ATM-TC hardware and relays information to
++*      the host processor through the host interface.
++*
++*  --The host processor can track the modem's transition through important states
++*      by accessing the Modem State Bit Field in the host interface.  Each bit in
++*      the bit field represents an important state to track in the modem.  As the
++*      modem transitions through each important state, the corresponding bit will
++*      change from a zero to a one.  Each bit in the bit field will only be reset to
++*      zero if the modem retrains.  If new states need to be tracked and are added
++*      in subsequent versions of the host interface, a corresponding bit will be
++*      added at the END of the bit field to ensure backwards compatibility.  The
++*      Modem State Bit Field is reset if the modem retrains or falls out of Showtime.
++*
++*  --An interrupt will be sent to the host processor when a change occurs in the
++*      Modem State Bit Field.  There is an interrupt masking register which can mask
++*      specific interrupts corresponding to the bits of the Modem State Bit Field.
++*      This allows the host to keep an interrupt from being generated for those
++*      states that are masked.
++*
++*  HISTORY:
++*
++*  11/20/02  J. Bergsagel    Written from the previous host interface file
++*  11/27/02  J. Bergsagel    Added comments for mailbox control struct and
++*                              fixed a couple items for overlay page stuff.
++*                            Also, added temporary elements for SWTC code.
++*  12/04/02  J. Bergsagel    Added extra dummy byte to DEV_HOST_eocVarDef_t
++*                              for proper word alignment.
++*  12/12/02  J. Bergsagel    Changed initial states in the modem state bit field
++*                              and added more instructions for adding more states.
++*  12/16/02  J. Bergsagel    Changed name "hostVersion_p" to "hostIntfcVersion_p".
++*                            Removed dspAturState from DEV_HOST_modemStateBitField_t.
++*                            Reorganized several struct elements to clean up the
++*                              host interface.
++*  12/27/02  Sameer V        Added missing channel 0 statistics for TC. Added
++*                            ocd error information.
++*  12/27/02  Sameer V        Added overlayState to OlayDP_Parms to indicate whether
++*                              overlays are being executed in current state.
++*  01/06/03  J. Bergsagel    Added maxAllowedMargin and minRequiredMargin to
++*                              DEV_HOST_msg_t.
++*                            Renamed TC chan 1 items to be chan 0 items to start out.
++*  01/17/03  Sameer V        Moved delineationState to atmStats structure.
++*  01/21/03  Barnett         Implemented Ax7 UNIT-MODULE modular software framework.
++*  01/22/03  J. Bergsagel    Added warning comments for certain struct typedefs.
++*  01/23/03  C. Perez-N.     Removed old AX5-only diags. command/response entries in the
++*                            HOST and DSP ennumerations, and added the AX7 new ones
++*                            Added pointer entries in the DEV_HOST_dspOamSharedInterface_t
++*                            structure pointing to the analog diags. input/output/options
++*                            structures.
++*  01/29/03  Sameer V        Removed TC_IDLE in enum for delineation state. Hardware
++*                            only reports TC_HUNT, TC_PRESYNC and TC_SYNC.
++*  03/07/03  Sameer/Jonathan Put SWTC token around structs and elements only used by SWTC
++*  03/12/03  Mannering       Add CO profile data structures
++*  03/18/03  J. Bergsagel    Removed the obsolete DSP_CHECK_TC response message.
++*  03/24/03  J. Bergsagel    Added DEV_HOST_hostInterruptMask_t for masking DSP interrupt sources
++*  03/28/03  C. Perez-N      Changed the C-style comments and made them C++ sytle instead.
++*                            Replaced the occurrences of "SINT32 *" pointer declarations with
++*                            "PSINT32"
++*  03/28/03  Mannering       Update CO profile data structures
++*  04/04/03  S. Yim          Add host I/F hooks for switchable hybrid and RJ11
++*                              inner/outer pair selection
++*  04/11/03  J. Bergsagel    Changed modem state bit field struct types to enums instead and used
++*                            a single integer variable for each "bitfield".
++*                            Changed bit field for host interrupt masks to an integer value also.
++*  04/14/03  J. Bergsagel    Changed name of table pointer "meanSquareTblDstrm_p" to "marginTblDstrm_p".
++*  04/03/03  Umesh Iyer      CMsg1 and RMsg1 use the same storage as CMSGPCB and RMSGPCB.
++*                            The string lengths for these have been adjusted to hold the longest
++*                            message in each case. The PCB messages from ADSL2 are longer.
++*  04/21/03  Sameeer V       Added new host mailbox message for shutting down the DSLSS peripherals.
++*  04/23/03  J. Bergsagel    Fixed comments for overlay mailbox messages and for losErrors.
++*  04/28/03  Mannering       Added skip phase op flag to  CO profile data structure
++*  05/05/03  Mannering       Review Comments - Removed "#if CO_PROFILE" from around structure
++*                            definitions and define the number of profiles (DEV_HOST_LIST_ENTRIES)
++*  05/13/03  J. Bergsagel    Added new elements to DEV_HOST_phyPerf_t for host control of hybrid.
++*  05/15/03  J. Bergsagel    Added "farEndLosErrors" and "farEndRdiErrors" to DEV_HOST_modemStatsDef_t.
++*  05/16/03  Mannering       Updated CO profile structure to support updated bit allocation and
++*                            interopability.
++*  05/20/03  Sameer V        Added DSP message to inicate DYING GASP.
++*  05/22/03  J. Bergsagel    Added a new struct typedef "DEV_HOST_hostInterruptSource_t".
++*                            Added "atucGhsRevisionNum" to "DEV_HOST_dspWrNegoParaDef_t".
++*                            Moved the following struct typedef's here to the public host interface:
++*                              DEV_HOST_dspBitSwapDef_t
++*                              DEV_HOST_atmDsBert_t
++*  05/28/03  A. Redfern      Changed pointer type and location for margin reporting.
++*  05/28/03  Mannering       Moved CO profile defines to dev_host_interface_pvt.h
++*  05/28/03  J. Bergsagel    Moved subStateIndex and STM BERT controls into new struct "DEV_HOST_modemEnvPublic_t"
++*  05/29/03  J. Bergsagel    Added elements to "DEV_HOST_modemEnvPublic_t" for host control of DSLSS LED's.
++*  06/10/03  Umesh Iyer      Modified trainMode check to be compliant with the new host i/f mods.
++*  06/05/03  J. Bergsagel    Added enum that will eventually replace the bitfield: DEV_HOST_diagAnlgOptionsVar_t.
++*                            Added new element "currentHybridNumUsed" in the DEV_HOST_phyPerf_t typedef
++*                            Added new host control flags for LPR signal detection on GPIO[0].
++*  06/06/03  A. Redfern      Removed fine gain scale from the CO profile and added max downstream power cutback.
++*                            Changed "test1" in CO profile struct to "phyEcDelayAdjustment".
++*  06/26/03  J. Bergsagel    Added genericStructure typedef and two pointer elements of this type in the big table.
++*  07/03/03  Jack Huang      Renamed test2 to bSwapThresholdUpdate
++*  07/07/03  Mallesh         Changed phySigTxPowerCutback_f flag to a variable phySigTxGainReductionAt0kft which indicates the
++*                            amount of gain reduction in linear scale.
++*  07/15/03  Sameer V        Changed DEV_HOST_diagAnlgOptionsVar_t to be an enum instead of a bit field. Host code
++*                            does not support setting bit fields.
++*  07/22/03  Jack Huang      Added bitswap control flag in host i/f for API calls
++*  08/06/03  Sameer V        Added missingToneDs_p to the DEV_HOST_oamWrNegoParaDef_t to enable host to switch off
++*                            DS tones on specified bins
++*  08/21/03  Jack Huang      Added pcbEnabled flag in the DEV_HOST_modemEnvPublic_t structure
++*                            Added g.hs buffer definitions to DEV_HOST_dspOamSharedInterface_t
++*                            Added DEV_HOST_consBufDef_t to the DEV_HOST_dspOamSharedInterface_t structure
++*  08/26/03  J. Bergsagel    Fixed name of "missingToneDs_p" to be "missingToneDsAddr" instead (since it is
++*                            not really used as a pointer).
++*  09/11/03  Mallesh         Added a flag "usPilotInT1413ModeInMedley" to determine the need to send Upstream Pilot
++*                            in medley in T1.413 mode.
++*  09/12/03  J. Bergsagel    Changed "test3" to "phyBitaFastPathExcessFineGainBump" in CO profile struct.
++*                            Changed "test4" to "phyBitaSkipGapAdjustment" in CO profile struct.
++*  09/23/03  J. Bergsagel    Changed "T1413vendorRevisionNumber" to "vendorRevisionNumber" in DEV_HOST_msg_t.
++*                            Added ADSL2 and ADSL2 diag. states to the modem state bit field.
++*  10/01/03  J. Bergsagel    Changed define of "MULTI_MODE" to be 255 to indicate that all possible bits
++*                            in the 8-bit bit field are turned on for any current and future training modes.
++*  10/09/03  M. Turkboylari  Added DSP_TRAINING_MSGS and adsl2DeltMsgs_p, which is a pointer to a pointer,
++*                            in order to pass the ADSL2 training and DELT messages to the host side. This is for ACT.
++*  10/20/03  Mallesh         Added a GHS state enumerator for cleardown
++*  10/20/03  Xiaohui Li      Add definition for READSL2_MODE and READSL2_DELT
++*  11/07/03  J. Bergsagel    Removed all code for when SWTC==1, which therefore allows removal of include of
++*                            "env_def_defines.h".  We shouldn't have any compile tokens used in this file.
++*                            (the SWTC token is always off in any Ax7 code).
++*  11/14/03  J. Bergsagel    Also removed READSL2_ENABLE token (no more compile tokens to be used in this .h file).
++*  12/12/03  Sameer/Ram      Added DEV_HOST_EOCAOC_INTERRUPT_MASK to enable host to disable response code for AOC/EOC 
++*                            mailbox messages
++*  12/09/03  Jack Huang      Changed G.hs txbuf size from 60 to 64 to fit the max segment size 
++*  12/15/03  Mallesh         Changed vendor ID type defenition from SINT16 to UINT16
++*  12/23/03  Sameer V        Added ability to turn off constellation display reporting to host using oamFeature bit field.
++*  12/24/03  Sameer V        Changed comment for Constellation Display Current Address to Host Write instead of DSP Write.
++*  12/26/03  Sameer/Ram      Added DEV_HOST_GHSMSG_INTERRUPT_MASK to enable host to disable response code for GHS Messages 
++*  (C) Copyright Texas Instruments Inc. 2002.  All rights reserved.
++*******************************************************************************/
++
++#include "dev_host_verdef.h"
++
++// ---------------------------------------------------------------------------------
++// Address of the pointer to the DEV_HOST_dspOamSharedInterface_s struct of pointers
++// This is where it all starts.
++// ---------------------------------------------------------------------------------
++#define DEV_HOST_DSP_OAM_POINTER_LOCATION 0x80000000
++
++// The define "MAX_NUM_UPBINS" is used in "DEV_HOST_diagAnlgInputVar_t" below.
++// This value can never be changed (for host intf. backwards compatibility)
++#define MAX_NUM_UPBINS 64
++
++// -----------------------------------------------
++// Begin common enumerations between DSP and host.
++// -----------------------------------------------
++
++// These Host-to-DSP commands are organized into two groups:
++// immediate state change commands and status affecting commands.
++// Do not add or remove commands except at the bottom since the DSP assumes this sequence.
++
++enum
++{
++  HOST_ACTREQ,         // Send R-ACKREQ and monitor for C-ACKx
++  HOST_QUIET,          // Sit quietly doing nothing for about 60 seconds, DEFAULT STATE; R_IDLE
++  HOST_XMITBITSWAP,    // Perform upstream bitswap - FOR INTERNAL USE ONLY
++  HOST_RCVBITSWAP,     // Perform downstream bitswap - FOR INTERNAL USE ONLY
++  HOST_RTDLPKT,        // Send a remote download packet - FOR INTERNAL USE ONLY
++  HOST_CHANGELED,      // Read the LED settings and change accordingly
++  HOST_IDLE,           // Sit quiet
++  HOST_REVERBTEST,     // Generate REVERB for manufacturing test
++  HOST_CAGCTEST,       // Set coarse receive gain for manufacturing test
++  HOST_DGASP,          // send Dying Gasp messages through EOC channel
++  HOST_GHSREQ,         // G.hs - FOR INTERNAL USE ONLY
++  HOST_GHSMSG,         // G.hs - FOR INTERNAL USE ONLY
++  HOST_GHS_SENDGALF,   // G.hs - FOR INTERNAL USE ONLY
++  HOST_GHSEXIT,        // G.hs - FOR INTERNAL USE ONLY
++  HOST_GHSMSG1,        // G.hs - FOR INTERNAL USE ONLY
++  HOST_HYBRID,         // Enable/Disable automatic hybrid switch
++  HOST_RJ11SELECT,     // RJ11 inner/outer pair select
++  HOST_DIGITAL_MEM,    // Digital Diags: run external memory tests
++  HOST_TXREVERB,       // AFE Diags: TX path Reverb
++  HOST_TXMEDLEY,       // AFE Diags: TX path Medley
++  HOST_RXNOISEPOWER,   // AFE Diags: RX noise power
++  HOST_ECPOWER,        // AFE Diags: RX eco power
++  HOST_ALL_ADIAG,      // AFE Diags: all major analog diagnostic modes. Host is responsible to initiate each diagnostic sessions
++  HOST_USER_ADIAG,     // AFE Diags: Host fills in analog diagnostic input data structure as specified and requests DSP to perform measurements as specified
++  HOST_QUIT_ADIAG,     // AFE Diags: Host requests DSP to quit current diagnostic session. This is used for stopping the transmit REVERB/MEDLEY
++  HOST_NO_CMD,         // All others - G.hs - FOR INTERNAL USE ONLY
++  HOST_DSLSS_SHUTDOWN, // Host initiated DSLSS shutdown message
++  HOST_SET_GENERIC,    // Set generic CO profile
++  HOST_UNDO_GENERIC,   // Set profile previous to Generic
++  HOST_GHS_CLEARDOWN   // G.hs - FOR INTERNAL USE ONLY to start cleardown
++};
++
++// These DSP-to-Host responses are organized into two groups:
++// responses to commands and requests for OAM services.
++
++enum
++{
++  DSP_IDLE,               // R_IDLE state entered
++  DSP_ACTMON,             // R_ACTMON state entered
++  DSP_TRAIN,              // R_TRAIN state entered
++  DSP_ACTIVE,             // R_ACTIVE state entered
++  DSP_XMITBITSWAP,        // Upstream bitswap complete - FOR INTERNAL USE ONLY
++  DSP_RCVBITSWAP,         // Downstream bitswap complete - FOR INTERNAL USE ONLY
++  DSP_RTDL,               // R_RTDL state entered - FOR INTERNAL USE ONLY
++  DSP_RRTDLPKT,           // RTDL packet received - FOR INTERNAL USE ONLY
++  DSP_XRTDLPKT,           // RTDL packet transmitted - FOR INTERNAL USE ONLY
++  DSP_ERROR,              // Command rejected, wrong state for this command
++  DSP_REVERBTEST,         // Manufacturing REVERB test mode entered
++  DSP_CAGCTEST,           // Manufacturing receive gain test done
++  DSP_OVERLAY_START,      // Notify host that page overlay has started - overlay number indicated by "tag"
++  DSP_OVERLAY_END,        // Notify host that page overlay has ended   - overlay number indicated by "tag"
++  DSP_CRATES1,            // CRATES1 message is valid and should be copied to host memory now
++  DSP_SNR,                // SNR calculations are ready and should be copied to host memory now
++  DSP_GHSMSG,             // G.hs - FOR INTERNAL USE ONLY
++  DSP_RCVBITSWAP_TIMEOUT, // Acknowledge Message was not received within ~500 msec (26 Superframes).
++  DSP_ATM_TC_SYNC,        // Indicates true TC sync on both the upstream and downstream. Phy layer ready for data xfer.
++  DSP_ATM_NO_TC_SYNC,     // Indicates loss of sync on phy layer on either US or DS.
++  DSP_HYBRID,             // DSP completed hybrid switch
++  DSP_RJ11SELECT,         // DSP completed RJ11 inner/outer pair select
++  DSP_INVALID_CMD,        // Manufacturing (Digital and AFE) diags: CMD received not recognized
++  DSP_TEST_PASSED,        // Manufacturing diags: test passed
++  DSP_TEST_FAILED,        // Manufacturing diags: test failed
++  DSP_TXREVERB,           // Manufacturing AFE diags: Response to HOST_TXREVERB
++  DSP_TXMEDLEY,           // Manufacturing AFE diags: Response to HOST_TXMEDLEY
++  DSP_RXNOISEPOWER,       // Manufacturing AFE diags: Response to HOST_RXNOISEPOWER
++  DSP_ECPOWER,            // Manufacturing AFE diags: Response to HOST_ECPOWER
++  DSP_ALL_ADIAG,          // Manufacturing AFE diags: Response to HOST_ALL_ADIAG
++  DSP_USER_ADIAG,         // Manufacturing AFE diags: Response to HOST_USER_ADIAG
++  DSP_QUIT_ADIAG,         // Manufacturing AFE diags: Response to HOST_QUIT_ADIAG
++  DSP_DGASP,              // DSP Message to indicate dying gasp
++  DSP_EOC,                // DSP Message to indicate that DSP sent an EOC message to CO
++  DSP_TRAINING_MSGS       // DSP Message to indicate that host has to copy the training message specified in the tag field.
++};
++
++// Define different ADSL training modes.
++//Defintions as per new host interface.
++#define NO_MODE             0
++#define GDMT_MODE           2
++#define GLITE_MODE          4
++#define ADSL2_MODE          8
++#define ADSL2_DELT          (ADSL2_MODE+1)
++#define ADSL2PLUS_MODE      16
++#define ADSL2PLUS_DELT      (ADSL2PLUS_MODE+1)
++#define READSL2_MODE        32
++#define READSL2_DELT        (READSL2_MODE+1)
++#define T1413_MODE          128
++#define MULTI_MODE          255 // all possible bits are set in the bit field
++
++// Define the reason for dropping the connection
++
++enum
++{
++  REASON_LOS         = 0x01,
++  REASON_DYING_GASP  = 0x02,
++  REASON_USCRCERR    = 0x04,
++  REASON_MARGIN_DROP = 0x08
++};
++
++
++// ----------------------------------------------------
++// Begin modem state bit field definitions - DSP write.
++// ----------------------------------------------------
++
++// BitField1 for initial states and G.hs states.
++// If more values need to be added, they will be added at the end (up to 32 total entries).  However, if this causes
++// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
++// that causes the proper values to be entered into the modem state bit fields.
++typedef enum
++{
++  ZERO_STATE1 = 0,
++  RTEST       = 0x1,
++  RIDLE       = 0x2,
++  RINIT       = 0x4,
++  RRESET      = 0x8,
++  GNSFLR      = 0x10,
++  GTONE       = 0x20,
++  GSILENT     = 0x40,
++  GNEGO       = 0x80,
++  GFAIL       = 0x100,
++  GACKX       = 0x200,
++  GQUIET2     = 0x400
++} DEV_HOST_stateBitField1_t; // this enum should only have 32 bit entries in it.  Add another enum if you need more.
++
++// BitField2 for T1.413 states and for the rest of the modem states (so far)
++// If more values need to be added, they will be added at the end (up to 32 total entries).  However, if this causes
++// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
++// that causes the proper values to be entered into the modem state bit fields.
++typedef enum
++{
++  ZERO_STATE2 = 0,
++  TNSFLR      = 0x1,
++  TACTREQ     = 0x2,
++  TACTMON     = 0x4,
++  TFAIL       = 0x8,
++  TACKX       = 0x10,
++  TQUIET2     = 0x20,
++  RQUIET2     = 0x40,
++  RREVERB1    = 0x80,
++  RQUIET3     = 0x100,
++  RECT        = 0x200,
++  RREVERB2    = 0x400,
++  RSEGUE1     = 0x800,
++  RREVERB3    = 0x1000,
++  RSEGUE2     = 0x2000,
++  RRATES1     = 0x4000,
++  RMSGS1      = 0x8000,
++  RMEDLEY     = 0x10000,
++  RREVERB4    = 0x20000,
++  RSEGUE3     = 0x40000,
++  RMSGSRA     = 0x80000,
++  RRATESRA    = 0x100000,
++  RREVERBRA   = 0x200000,
++  RSEGUERA    = 0x400000,
++  RMSGS2      = 0x800000,
++  RRATES2     = 0x1000000,
++  RREVERB5    = 0x2000000,
++  RSEGUE4     = 0x4000000,
++  RBNG        = 0x8000000,
++  RREVERB6    = 0x10000000,
++  RSHOWTIME   = 0x20000000
++} DEV_HOST_stateBitField2_t;  // this enum should only have 32 bit entries in it.  Add another enum if you need more.
++
++// BitField3 for ADSL2 states
++// If more values need to be added, they will be added at the end (up to 32 total entries).  However, if this causes
++// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
++// that causes the proper values to be entered into the modem state bit fields.
++typedef enum
++{
++  ZERO_STATE3 = 0,
++  G2QUIET1    = 0x1,
++  G2COMB1     = 0x2,
++  G2QUIET2    = 0x4,
++  G2COMB2     = 0x8,
++  G2ICOMB1    = 0x10,
++  G2LINEPROBE = 0x20,
++  G2QUIET3    = 0x40,
++  G2COMB3     = 0x80,
++  G2ICOMB2    = 0x100,
++  G2RMSGFMT   = 0x200,
++  G2RMSGPCB   = 0x400,
++  G2REVERB1   = 0x800,
++  G2QUIET4    = 0x1000,
++  G2REVERB2   = 0x2000,
++  G2QUIET5    = 0x4000,
++  G2REVERB3   = 0x8000,
++  G2ECT       = 0x10000,
++  G2REVERB4   = 0x20000,
++  G2SEGUE1    = 0x40000,
++  G2REVERB5   = 0x80000,
++  G2SEGUE2    = 0x100000,
++  G2RMSG1     = 0x200000,
++  G2MEDLEY    = 0x400000,
++  G2EXCHANGE  = 0x800000,
++  G2RMSG2     = 0x1000000,
++  G2REVERB6   = 0x2000000,
++  G2SEGUE3    = 0x4000000,
++  G2RPARAMS   = 0x8000000,
++  G2REVERB7   = 0x10000000,
++  G2SEGUE4    = 0x20000000
++} DEV_HOST_stateBitField3_t;  // this enum should only have 32 bit entries in it.  Add another enum if you need more.
++
++// BitField4 for ADSL2 diag. states
++// If more values need to be added, they will be added at the end (up to 32 total entries).  However, if this causes
++// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
++// that causes the proper values to be entered into the modem state bit fields.
++typedef enum
++{
++  ZERO_STATE4 = 0,
++  GDSEGUE1    = 0x1,
++  GDREVERB5   = 0x2,
++  GDSEGUE2    = 0x4,
++  GDEXCHANGE  = 0x8,
++  GDSEGUELD   = 0x10,
++  GDRMSGLD    = 0x20,
++  GDQUIET1LD  = 0x40,
++  GDQUIET2LD  = 0x80,
++  GDRACK1     = 0x100,
++  GDRNACK1    = 0x200,
++  GDQUIETLAST = 0x400
++} DEV_HOST_stateBitField4_t;  // this enum should only have 32 bit entries in it.  Add another enum if you need more.
++
++// This struct collects all of the bitfield types listed above for the modem state bit field(s)
++typedef struct
++{
++  DEV_HOST_stateBitField1_t bitField1; // this is the first modem state bit field (mostly init. and G.hs)
++  DEV_HOST_stateBitField2_t bitField2; // this is the second modem state bit field (T1.413 and G.dmt)
++  DEV_HOST_stateBitField3_t bitField3; // this is the third modem state bit field (ADSL2)
++  DEV_HOST_stateBitField4_t bitField4; // this is the fourth modem state bit field (ADSL2 diag.)
++} DEV_HOST_modemStateBitField_t;
++
++
++// -----------------------------------------------
++// Begin NegoPara message definitions - DSP write.
++// -----------------------------------------------
++
++typedef struct
++{
++  UINT8  trainMode;          // Train mode selected.  See training modes defined above.
++  UINT8  bDummy1;            // dummy byte for explicit 32-bit alignment
++  UINT16 lineLength;         // Contains loop length estimate.  Accuracy w/i 500 ft.  LSbit = 1 for straight loop, = 0 for bridge tap
++  UINT32 atucVendorId;       // Pass the vendor id of the CO to the host
++  UINT8  cMsgs1[8];          // CMsgs1 and CMSGPCB
++  UINT16 adsl2DSRate;        //
++  UINT8  cRates2;            //
++  UINT8  rRates2;            //
++  UINT8  rRates1[4][11];     //
++  UINT8  cMsgs2[4];          //
++  UINT8  cRates1[4][30];     //
++  UINT8  rMsgs2[4];          //
++  UINT16 adsl2USRate;        //
++  UINT8  atucGhsRevisionNum; // Pass the G.hs Revision number of the CO to the host
++  UINT8  reserved1;          //
++  PUINT8 *adsl2DeltMsgs_p;   // This pointer to a pointer passes the address of the globalvar.pString, which is also
++                             // a pointer list of pointers. It will be used to pass all the new ADSL2 DELT messages to
++                             // host side. This is for ACT.
++} DEV_HOST_dspWrNegoParaDef_t;
++
++
++// ----------------------------------------------------
++// Begin OAM NegoPara message definitions - Host write.
++// ----------------------------------------------------
++
++// OAM Feature bit fields.
++//
++// Bit    0 - Enable auto retrain of modem
++// Bit    1 - Detect and report TC sync to host
++// Bit 2-31 - Reserved
++
++#define DEV_HOST_AUTORETRAIN_ON       0x00000001
++#define DEV_HOST_TC_SYNC_DETECT_ON    0x00000002
++
++#define DEV_HOST_AUTORETRAIN_MASK       0x00000001
++#define DEV_HOST_TC_SYNC_DETECT_MASK    0x00000002
++#define DEV_HOST_EOCAOC_INTERRUPT_MASK  0x00000004
++#define DEV_HOST_CONS_DISP_DISABLE_MASK 0x00000008
++#define DEV_HOST_GHSMSG_INTERRUPT_MASK  0x00000010
++
++typedef struct
++{
++  UINT8   stdMode;              // Desired train mode.  See training modes defined above.
++  UINT8   ghsSequence;          // Selected G.hs session as shown in Appendix 1
++  UINT8   usPilotFlag;          // Value of 1 indicates transmit an upstream pilot on bin 16
++  UINT8   bDummy1;              // dummy byte for 32-bit alignment
++  UINT8   rMsgs1[38];           // RMSG-1(6) and RMSG_PCB (38)
++  UINT8   bDummy2[2];           // dummy bytes for 32-bit alignment
++  UINT32  oamFeature;           // 32 bit wide bit field to set OAM-specific features.
++  SINT8   marginThreshold;      // Threshold for margin reporting
++  UINT8   hostFixAgc;           // flag to force datapump to bypass AGC training and use the following values
++  UINT8   hostFixEqualizer;     // forced analog equalizer value used during AGC training when hostfix_agc is on
++  UINT8   hostFixPga1;          // forced pga1 value used during AGC training when hostFixAgc is on
++  UINT8   hostFixPga2;          // forced pga2 value used during AGC training when hostFixAgc is on
++  UINT8   hostFixPga3;          // forced pga3 value used during AGC training when hostFixAgc is on
++  UINT8   marginMonitorShwtme;  // margin monitoring flag (during showtime)
++  UINT8   marginMonitorTrning;  // margin monitoring flag (during training)
++  UINT8   disableLosAlarm;      // flag to disable training based on los
++  UINT8   usCrcRetrain;         // flag to disable retrain due to excessive USCRC
++  UINT8   t1413VendorId[2];     // Vendor ID used for T1.413 trainings
++  UINT8   gdmtVendorId[8];      // Vendor ID used for G.dmt trainings (ITU VendorID)
++  UINT8   missingTones[64];     // 64 element array to define missing tones for TX_MEDLEY and TX REVERB tests
++  UINT32  missingToneDsAddr;    // Address given to DSP for tones to be switched off in DS direction
++  UINT8   dsToneTurnoff_f;      // This flag controls the DS tone turn off logic
++  UINT8   reserved1;            // Dummy bytes
++  UINT8   reserved2;            // Dummy bytes
++  UINT8   reserved3;            // Dummy bytes
++} DEV_HOST_oamWrNegoParaDef_t;
++
++
++// ----------------------------------------
++// Begin Rate-adaptive message definitions.
++// ----------------------------------------
++
++// The four values below can never be changed (for host intf. backwards compatibility)
++#define DEV_HOST_RMSGSRA_LENGTH  10
++#define DEV_HOST_RRATESRA_LENGTH 1
++#define DEV_HOST_CRATESRA_LENGTH 120
++#define DEV_HOST_CMSGSRA_LENGTH  6
++
++typedef struct
++{
++  UINT8 rRatesRaString[DEV_HOST_RRATESRA_LENGTH+3];
++  UINT8 rMsgsRaString[DEV_HOST_RMSGSRA_LENGTH+2];
++  UINT8 cMsgsRaString[DEV_HOST_CMSGSRA_LENGTH+2];
++} DEV_HOST_raMsgsDef_t;
++
++
++// ----------------------------------------------
++// Begin superframe cnts definitions - DSP write.
++// ----------------------------------------------
++
++#define DEV_HOST_FRAMES_PER_SUPER   68
++#define DEV_HOST_SUPERFRAMECNTDSTRM 0
++#define DEV_HOST_SUPERFRAMECNTUSTRM 4
++
++// Although only the least significant 8 bits should be used as an
++// unsigned char for computing the bitswap superframe number, a
++// full 32 bit counter is provided here in order to have an
++// accurate indicator of the length of time that the modem has
++// been connected.  This counter will overflow after 2.35 years
++// of connect time.
++
++typedef struct
++{
++  UINT32 wSuperFrameCntDstrm;
++  UINT32 wSuperFrameCntUstrm;
++} DEV_HOST_dspWrSuperFrameCntDef_t;
++
++
++// --------------------------------
++// Begin ATUR/ATUC msg definitions.
++// --------------------------------
++
++// Grouping used by the DSP to simplify parameter passing.
++// All of these are written by the DSP.
++
++typedef struct
++{
++  UINT16 vendorId;          // TI's vendor ID = 0x0004; Amati's vendor ID = 0x0006
++  UINT8  versionNum;        // T1.413 issue number
++  UINT8  rateAdapt;         // 0 = fix rate (Default); 1= adaptive rate
++  UINT8  trellis;           // 0 = disable trellis(default); 1 = enable trellis
++  UINT8  echoCancelling;    // 0 = disable echo cancelling; 1 = enable echo cancelling(default)
++  UINT8  maxBits;           // value range: 0-15; default = 15
++  UINT8  maxPsd;            //
++  UINT8  actualPsd;         //
++  UINT8  maxIntlvDepth;     // 0, 1, 2, or 3 for 64, 128, 256, or 512 max depth
++  UINT8  framingMode;       // 0 for asynchronous, 1 for synchronous full overhead
++                            // 2 for reduced overhead, 3 for merged reduced overhead DSP write.
++  UINT8  maxFrameMode;      // maximum framing mode desired.  Nor 0 or 3.
++  SINT16 targetMargin;      //
++  SINT16 maxAllowedMargin;  //
++  SINT16 minRequiredMargin; //
++  SINT16 maxTotBits;        //
++  UINT8  grossGain;         //
++  UINT8  ntr;               // Enable/disable NTR support
++  SINT16 loopAttn;          // Loop Attenuation
++  UINT8  vendorRevisionNumber;  // Reported Vendor Revision Number
++  UINT8  reserved1;         // for 32-bit alignment
++  UINT8  reserved2;         // for 32-bit alignment
++  UINT8  reserved3;         // for 32-bit alignment
++} DEV_HOST_msg_t;
++
++
++// --------------------------------------
++// Begin bits and gains table definitions
++// --------------------------------------
++
++typedef struct
++{
++  PUINT8  aturBng_p;            // pointer to ATU-R bits and gains table
++  PUINT8  atucBng_p;            // pointer to ATU-C bits and gains table
++  PUINT8  bitAllocTblDstrm_p;   // pointer to Downstream Bit Allocation table
++  PUINT8  bitAllocTblUstrm_p;   // pointer to Upstream Bit Allocation table
++  PSINT8  marginTblDstrm_p;     // pointer to Downstream Margin table
++} DEV_HOST_dspWrSharedTables_t;
++
++
++// ----------------------------------------
++// Begin datapump code overlay definitions.
++// ----------------------------------------
++
++#define DEV_HOST_PAGE_NUM 4   // number of overlay pages
++
++// Never access a struct of this typedef directly.  Always go through the DEV_HOST_olayDpDef_t struct
++typedef struct
++{
++  UINT32 overlayHostAddr;     // source address in host memory
++  UINT32 overlayXferCount;    // number of 32bit words to be transfered
++  UINT32 overlayDspAddr;      // destination address in DSP's PMEM
++} DEV_HOST_olayDpPageDef_t;
++
++
++typedef struct
++{
++  UINT32 overlayStatus;                      // Status of current overlay to DSP PMEM
++  UINT32 overlayNumber;                      // DSP PMEM overlay page number
++  UINT32 overlayState;                       // Indicates whether current state is an overlay state
++  DEV_HOST_olayDpPageDef_t *olayDpPage_p[DEV_HOST_PAGE_NUM]; // Def's for the Pages
++} DEV_HOST_olayDpDef_t;
++
++
++// -------------------------
++// Begin ATM-TC definitions.
++// -------------------------
++
++// TC cell states.
++typedef enum
++{
++  TC_HUNT,
++  TC_PRESYNC,
++  TC_SYNC
++} DEV_HOST_cellDelinState_t;
++
++
++// --------------------------------------------
++// Begin datapump error/statistics definitions.
++// --------------------------------------------
++
++// Never access a struct of this typedef directly.  Always go through the DEV_HOST_modemStatsDef_t struct.
++typedef struct
++{
++  UINT32 crcErrors;   // Num of CRC errored ADSL frames
++  UINT32 fecErrors;   // Num of FEC errored (corrected) ADSL frames
++  UINT32 ocdErrors;   // Out of Cell Delineation
++  UINT32 ncdError;    // No Cell Delineation
++  UINT32 lcdErrors;   // Loss of Cell Delineation (within the same connection)
++  UINT32 hecErrors;   // Num of HEC errored ADSL frames
++} DEV_HOST_errorStats_t;
++
++
++typedef struct
++{
++  DEV_HOST_errorStats_t *usErrorStatsIntlv_p; // us error stats - interleave path
++  DEV_HOST_errorStats_t *dsErrorStatsIntlv_p; // ds error stats - interleave path
++  DEV_HOST_errorStats_t *usErrorStatsFast_p;  // us error stats - fast path
++  DEV_HOST_errorStats_t *dsErrorStatsFast_p;  // ds error stats - fast path
++  UINT32                losErrors;   // Num of ADSL frames where loss-of-signal
++  UINT32                sefErrors;   // Num of severly errored ADSL frames - LOS > MAXBADSYNC ADSL frames
++  UINT32                farEndLosErrors; // Number of reported LOS defects by the CO.
++  UINT32                farEndRdiErrors; // Number of reported RDI defects by the CO.
++} DEV_HOST_modemStatsDef_t;
++
++// Never access a struct of this typedef directly.  Always go through the DEV_HOST_atmStats_t struct.
++typedef struct
++{
++  UINT32 goodCount;   // Upstream Good Cell Count
++  UINT32 idleCount;   // Upstream Idle Cell Count
++} DEV_HOST_usAtmStats_t;
++
++// Never access a struct of this typedef directly.  Always go through the DEV_HOST_atmStats_t struct.
++typedef struct
++{
++  UINT32 goodCount;      // Downstream Good Cell Count
++  UINT32 idleCount;      // Downstream Idle Cell Count
++  UINT32 badHecCount;    // Downstream Bad Hec Cell Count
++  UINT32 ovflwDropCount; // Downstream Overflow Dropped Cell Count
++  DEV_HOST_cellDelinState_t delineationState; // Indicates current delineation state
++} DEV_HOST_dsAtmStats_t;
++
++
++typedef struct
++{
++  DEV_HOST_usAtmStats_t *us0_p; // US ATM stats for TC channel 0
++  DEV_HOST_dsAtmStats_t *ds0_p; // DS ATM stats for TC channel 0
++  DEV_HOST_usAtmStats_t *us1_p; // US ATM stats for TC channel 1
++  DEV_HOST_dsAtmStats_t *ds1_p; // DS ATM stats for TC channel 1
++} DEV_HOST_atmStats_t;
++
++
++// ----------------------
++// Begin EOC definitions.
++// ----------------------
++
++// The two values below can never change (for backwards compatibility of host intf.)
++#define DEV_HOST_EOCREG4LENGTH   32
++#define DEV_HOST_EOCREG5LENGTH   32
++
++typedef struct
++{
++  UINT8        eocReg4[DEV_HOST_EOCREG4LENGTH];    // Host/Dsp Write, vendor specific EOC Register 4
++  UINT8        eocReg5[DEV_HOST_EOCREG5LENGTH];    // Host/Dsp Write, vendor specific EOC Register 5
++  UINT8        vendorId[8];               // Host write
++  UINT8        revNumber[4];              // Host, ATU-R Revision Number
++  UINT8        serialNumber[32];          // Host write
++  UINT8        eocReg4Length;             // Host Write, valid length for EOC register 4
++  UINT8        eocReg5Length;             // Host Write, valid length for EOC register 5
++  UINT8        dummy[2];                  // dummy bytes for 32-bit alignment
++  UINT32       eocModemStatusReg;         // Dsp Write, status bits to host
++  UINT8        lineAtten;                 // Dsp Write, line attenuation in 0.5 db step
++  SINT8        dsMargin;                  // DSP Write, measured DS margin
++  UINT8        aturConfig[30];            // Dsp Write, also used by EOC for ATUR Configuration
++} DEV_HOST_eocVarDef_t;
++
++typedef struct
++{
++  UINT16       endEocThresh;              // Host Write, end of Clear EOC stream threshold
++  UINT16       dummy;                     // dummy value to fill gap
++  UINT32       dropEocCount;              // Dsp Write, counter of dropped Clear EOC bytes
++  UINT16       eocRxLength;               // Host/DSP write, number of valid Rx Clear EOC bytes
++  UINT16       eocTxLength;               // Host/DSP write, number of valid Tx Clear EOC bytes
++  UINT8        eocRxBuf[64];              // Dsp Write, Buffer for receiving Rx Clear EOC bytes
++  UINT8        eocTxBuf[64];              // Host Write, Buffer for writing Tx Clear EOC bytes
++} DEV_HOST_clearEocVarDef_t;
++
++
++// -----------------------------------
++// Begin CO profile Definitions.
++// -----------------------------------
++
++/* struct size must be a word size            */
++typedef struct
++{
++
++  SINT16 devCodecRxdf4Coeff[12] ;             // (BOTH) IIR Coefficients
++  SINT16 devCodecTxdf2aCoeff[64] ;            // (BOTH) FIR filter coefficients
++  SINT16 devCodecTxdf2bCoeff[64] ;            // (BOTH) FIR filter coefficients
++  SINT16 devCodecTxdf1Coeff[12] ;             // (BOTH) IIR filter coefficients
++  UINT16 devCodecTxDf2aDen;                   // (BOTH) denominator for IIR filter
++  UINT16 devCodecTxDf2bDen;                   // (BOTH) denominator for IIR filter
++  SINT16 ctrlMsmSpecGain[32];                 // (BOTH)
++
++  SINT16 phyBitaRateNegIntNoTrellis ;         // (BOTH) value to set
++  SINT16 phyBitaRateNegIntTrellis ;           // (BOTH) value to set
++  SINT16 phyBitaRateNegFastNoTrellis ;        // (BOTH) value to set
++  SINT16 phyBitaRateNegFastTrellis ;          // (BOTH) value to set
++  SINT16 phyBitaRsFlag ;                      // (BOTH)
++  SINT16 phyBitaFirstSubChannel ;             // (BOTH)
++  SINT16 phyBitaMaxFineGainBump;              // max fine gain bump
++  SINT16 phyBitaFineGainReduction;            // fine gain reduction
++  SINT16 phyBitaMaxDownstreamPowerCutback;    // max downstream power cutback
++
++  SINT16 phySigTxGainReductionAt0kft;         // upstream power reduction at 0 kft.
++
++  SINT16 phyAgcPgaTarget ;                    // (BOTH) compare value
++
++  UINT16 imsg413TxRate ;                      // (BOTH) Tx rate
++  SINT16 imsg413RsBytesAdjust ;               // (BOTH) subtract value
++  UINT16 imsg413PstringMask ;                 // (POTS) Or'ed into pString[RMSGS1_INDEX][1]
++  SINT16 imsg413UsPilot ;                     // (BOTH)??
++  UINT16 imsg413SkipPhaseOp ;                 // (POTS)
++
++  UINT16 ctrlMsmSensitivity1 ;                // (BOTH) value to set
++  UINT16 ctrlMsmTxPsdShape_f;                 // (BOTH) upstream spectral shaping flag
++
++  UINT16 ovhdAocUsBswapReq_f ;                // (BOTH)value to set
++  UINT16 ovhdAocScanMse_f  ;                  // (BOTH)value to set
++
++  SINT16 phyRevFullFirstBin ;                 //
++  SINT16 phyRevFullLastBin ;                  //
++  SINT16 phyRevFirstBin ;                     //
++  SINT16 phyRevLastBin ;                      //
++  SINT16 phyMedFirstBin ;                     //
++  SINT16 phyMedLastBin ;                      //
++  SINT16 phyMedOptionalLastBin;               // Medley last bin - optional
++
++  SINT16 phyEcDelayAdjustment;                // Echo delay adjustment
++  SINT16 bSwapThresholdUpdate;                // bSwapThresholdUpdate
++  SINT16 phyBitaFastPathExcessFineGainBump;   // Used in phy_bita.c
++  SINT16 phyBitaSkipGapAdjustment;            // Used in phy_bita.c
++  SINT16 usPilotInT1413ModeInMedley;          // To send Upstream Pilot in medley in T1.413 mode.
++
++  UINT32 profileVendorId ;                    // vendor id
++
++} DEV_HOST_coData_t ;
++
++typedef struct
++{
++  DEV_HOST_coData_t *  hostProfileBase_p;     // base address of profile list
++} DEV_HOST_profileBase_t ;
++
++
++
++// -----------------------------------
++// Begin DSP/Host Mailbox Definitions.
++// -----------------------------------
++
++// The 3 values below can never be decreased, only increased.
++// If you increase one of the values, you must add more to the
++//   initializers in "dev_host_interface.c".
++#define DEV_HOST_HOSTQUEUE_LENGTH  8
++#define DEV_HOST_DSPQUEUE_LENGTH   8
++#define DEV_HOST_TEXTQUEUE_LENGTH  8
++
++// Never access a struct of this typedef directly.  Always go through the DEV_HOST_mailboxControl_t struct.
++typedef struct
++{
++  UINT8 cmd;
++  UINT8 tag;
++  UINT8 param1;
++  UINT8 param2;
++} DEV_HOST_dspHostMsg_t;
++
++// Never access a struct of this typedef directly.  Always go through the DEV_HOST_mailboxControl_t struct.
++typedef struct
++{
++  UINT32 msgPart1;
++  UINT32 msgPart2;
++} DEV_HOST_textMsg_t;
++
++// The structure below has been ordered so that the Host need only write to
++// even byte locations to update the indices.
++
++// The Buffer pointers in the struct below each point to a different
++//   struct array that has an array size of one of the matching Queue Length
++//   values defined above (DEV_HOST_HOSTQUEUE_LENGTH, DEV_HOST_DSPQUEUE_LENGTH,
++//   and DEV_HOST_TEXTQUEUE_LENGTH).
++
++typedef struct
++{
++  UINT8 hostInInx;  // Host write, DSP must never write except for init
++  UINT8 bDummy0[3]; //   dummy bytes for explicit 32-bit alignment
++  UINT8 hostOutInx; // DSP write, Host must never write
++  UINT8 bDummy1[3]; //   dummy bytes for explicit 32-bit alignment
++  UINT8 dspOutInx;  // Host write, DSP must never write except for init
++  UINT8 bDummy2[3]; //   dummy bytes for explicit 32-bit alignment
++  UINT8 dspInInx;   // DSP write, Host must never write
++  UINT8 bDummy3[3]; //   dummy bytes for explicit 32-bit alignment
++  UINT8 textInInx;  // DSP write, Host must never write
++  UINT8 bDummy4[3]; //   dummy bytes for explicit 32-bit alignment
++  UINT8 textOutInx; // Host write, DSP must never write except for init
++  UINT8 bDummy5[3]; //   dummy bytes for explicit 32-bit alignment
++  DEV_HOST_dspHostMsg_t *hostMsgBuf_p;  // pointer to Host Mailbox Buffer (Host writes the buffer)
++  DEV_HOST_dspHostMsg_t *dspMsgBuf_p;   // pointer to DSP Mailbox Buffer (DSP writes the buffer)
++  DEV_HOST_textMsg_t *textMsgBuf_p;     // pointer to Text Mailbox Buffer (DSP writes the buffer)
++} DEV_HOST_mailboxControl_t;
++
++
++//-----------------------------------------
++// Physical layer performance parameter
++//-----------------------------------------
++typedef struct
++{
++  SINT32 hybridCost[5];             // Cost functions for hybrids (0: none, 1-4 hybrid options)
++  SINT32 usAvgGain;                 // upstream average gain in 20log10 (Q8)
++  SINT32 dsAvgGain;                 // downstream average gain in 20log10 (Q8)
++  UINT8  disableDspHybridSelect_f;  // Allows host to disable the automatic hybrid selection by the DSP
++  UINT8  hostSelectHybridNum;       // DSP will use this hybrid number only if DSP Select is disabled (values: 1-4)
++  UINT8  currentHybridNumUsed;      // DSP indicates to the host the current hybrid number in use
++  UINT8  reserved1;                 // reserved for future use
++} DEV_HOST_phyPerf_t;
++
++
++/***********************************************************
++ * The 3 structures below are used only for analog
++ * diagnostic functions originally defined in diag.h
++ * Moved here by Carlos A. Perez under J. Bergsagel request
++ ***********************************************************/
++
++/****************************************************************************/
++/* Options for the Analog Diagnostic user input data structure              */
++/* (MUST be word aligned)                                                   */
++/****************************************************************************/
++typedef enum
++{
++  ZERO_DIAG_OPT   = 0,       // dummy value for zero place-holder
++  NOISE_ONLY      = 0x1,     // diagnostic in noise only mode (on=1, off=0), disregard diagMode 0-4
++  EXTERNAL_CO     = 0x2,     // operates against external CO (external=1, internal=0)
++  DIAG_AGC        = 0x4,     // agc selects gains control (agc=1, manual=0)
++  CROSSTALK_TEQ   = 0x8,     // crosstalk selects teq (crosstalk=1, manual=0)
++  LEAKY_TEQ       = 0x10,    // use leaky teq (on=1, off=0)
++  AUX_AMPS        = 0x20,    // auxamps (on=1, off=0)
++  BW_SELECT       = 0x40,    // change rxhpf/txlpf fc (modify=1, default=0)
++  DIAG_HYB_SELECT = 0x80,    // change hybrid (modify=1, default=0)
++  POWER_DOWN_CDC  = 0x100,   // power down codec (power down=1, no power down=0)
++  ISDN_OP_MODE    = 0x200,   // operation mode (pots=0, isdn=1)
++  BYPASS_RXAF2    = 0x400,   // Bypass except RXAF2 (on=1, off = 0)
++  TX_TEST_CONT    = 0x800,   // Continuous tx test (on=1, off=0)
++  TX_SCALE_MTT    = 0x1000   // Scale tx signal for Mtt test (on=1, off=0)
++} DEV_HOST_diagAnlgOptionsVar_t;
++
++/****************************************************************************/
++/* Analog Diagnostic user input data structure (MUST be word align)         */
++/****************************************************************************/
++
++typedef struct
++{
++  DEV_HOST_diagAnlgOptionsVar_t   diagOption; // Other diagnostic optional settings
++
++  UINT8                     diagMode;     // Performance diagnostic mode
++  UINT8                     txMode;       // transmit mode
++  UINT8                     rxMode;       // receive mode
++  UINT8                     teqSp;        // Select teq starting pt
++  UINT8                     txDf1;        // see dev_codec_filters.c and
++  UINT8                     txDf2a;       // dev_codec.h for filter coefficients
++  UINT8                     txDf2b;
++  UINT8                     rxDf4;
++
++  UINT16                    codingGain256Log2;  // 256*Log2(coding gain)
++  UINT16                    noiseMargin256Log2; // 256*Log2(noise margin)
++
++  UINT16                    rxPga1;       // PGA1
++  UINT16                    rxPga2;       // PGA2
++  UINT16                    rxPga3;       // PGA3
++  UINT16                    anlgEq;       // AEQ settings (dB/MHz)
++
++  SINT8                     pilotBin;     // Select  pilot subchannel
++  SINT8                     txSwGain;     // manual set for bridge tap loop
++  SINT8                     tdw1Len;      // TDW1 length - 0,2,4,8,16
++  SINT8                     tdw2Len;      // TDW2 length - 0,2,4,8,16
++
++  UINT8                     teqEcMode;    // TEQ/EC mode
++  UINT8                     hybrid;
++  UINT8                     txAttn;       // Codec Tx attenuation
++  UINT8                     txGain;       // Codec Tx gain (Sangam only)
++
++  SINT16                    txPda;        //Codec Tx Digital gain/attn
++  UINT8                     txTone[MAX_NUM_UPBINS];  // Turning tones on/off
++                                                     // Still govern by lastbin
++  UINT16                   rsvd;          //for 32 bits alignment
++}DEV_HOST_diagAnlgInputVar_t;
++
++/****************************************************************************/
++/* Analog diagnostic output data structure                                  */
++/****************************************************************************/
++typedef struct
++{
++  PSINT32  rxSnr_p[2];                  // Pointer to estimated snr
++  PSINT32  rxSubChannelCapacity_p[2];   // Pointer to estimated subchan capacity
++  PSINT32  rxSignalPower_p[2];          // Pointer to estimated signal power
++  PSINT32  rxNoisePower_p[2];           // Pointer to estimated noise power
++  PSINT32  rxAvg_p;                     // Pointer to average of rcvd signal
++  SINT32   chanCapacity[2] ;            // Channel total capacity
++  SINT32   dataRate[2];                 // Modem data rate (SNR)
++  SINT32   avgNoiseFloor;               // Average noise floor
++  SINT16   snrGap256Log2;               // 256*Log2(snr gap)
++  SINT16   rxPga1;                      // PGA1
++  SINT16   rxPga2;                      // PGA2
++  SINT16   rxPga3;                      // PGA3
++  SINT16   anlgEq;                      // AEQ settings (dB/MHz)
++  SINT16   rsvd;
++}DEV_HOST_diagAnlgOutputVar_t;
++
++
++// Bit field structure that allows the host to mask off interrupt sources for possible DSP-to-Host interrupts.
++// Each bit represents a possible source of interrupts in the DSP code that might cause a DSP-to-Host
++//   interrupt to occur.
++// This mask structure is not intended to show how interrupt sources in the DSP code correspond to the actual
++//   DSP-to-Host interrupts.  There could be multiple ways to cause an interrupt in the DSP code, but they all
++//   eventually tie into one of the three possible DSP-to-Host interrupts.
++// The host should write a "1" to an individual bit when it wants to mask possible interrupts from that source.
++
++// enum that represents individual bits in maskBitField1
++typedef enum
++{
++  ZERO_MASK1      = 0,   // dummy value for zero place-holder
++  DSP_MSG_BUF     = 0x1, // mask interrupts due to DSP-to-Host message mailbox updates
++  STATE_BIT_FIELD = 0x2, // mask interrupts due to changes in the modem state bit fields
++  DSP_HEARTBEAT   = 0x4  // mask interrupts for the DSP hearbeat
++} DEV_HOST_intMask1_t; // this enum should only have 32 values in it (maximum).
++
++// Add more "mask bit fields" at the end of this struct if you need more mask values
++typedef struct
++{
++  DEV_HOST_intMask1_t maskBitField1;
++} DEV_HOST_hostInterruptMask_t;  // this struct should only have 32 bits in it.
++
++// Bit field structure that allows the host to determine the source(s) of DSP-to-Host interrupts in case
++//   several of the interrupt sources get combined onto a single DSP-to-Host interrupt.
++// DSP will set each bit to a "1"as an interrupt occurs.
++// Host has the reponsibility to clear each bit to a "0" after it has determined the source(s) of interrupts.
++// Each source bit field in this struct will use the same enum typedef that matches the corresponding mask
++//   bit field in "DEV_HOST_hostInterruptMask_t"
++typedef struct
++{
++  DEV_HOST_intMask1_t sourceBitField1;
++} DEV_HOST_hostInterruptSource_t;
++
++
++// --------------------------
++// Begin bitswap definitions.
++// --------------------------
++
++// bitSwapSCnt contains the superframe to perform bit swap
++// The entries must be ordered so that the first group only contains bit change commands
++// The other entries may contain power adjustment instructions and must be
++// written with something.  NOP (0) is an available instruction.
++typedef struct
++{
++  PUINT8 fineGains_p;          // pointer to bng string, needed to check fine gains for powerswap
++  UINT8  bitSwapNewIndices[6]; // Bin before bitSwapBin to process
++  UINT8  bitSwapCmd[6];        // Bitswap command for bitSwapBin
++  UINT8  bitSwapBin[6];        // bin to modify
++  UINT8  bitSwapSCnt;          // Superframe count on which to perform bitswap
++  UINT8  bitSwapEnabled;       // bitSwapEnabled
++} DEV_HOST_dspBitSwapDef_t;
++
++
++// ---------------------------
++// Begin ATM BERT definitions.
++// ---------------------------
++
++// Structure used for ATM Idle Cells based bit error rate computation.
++typedef struct
++{
++  UINT8  atmBertFlag;      // Feature enable/disable flag (Host write)
++  UINT8  dummy1;
++  UINT8  dummy[2];         // Dummy bytes for 32-bit alignment
++  UINT32 bitCountLow;      // Low part of 64-bit BERT bit count (DSP write)
++  UINT32 bitCountHigh;     // High part of 64-bit BERT bit count (DSP write)
++  UINT32 bitErrorCountLow; // Low part of 64-bit BERT bit count (DSP write)
++  UINT32 bitErrorCountHigh;// High part of 64-bit BERT bit count (DSP write)
++} DEV_HOST_atmDsBert_t;
++
++
++// ------------------------------------
++// Misc. modem environment definitions.
++// ------------------------------------
++
++
++typedef struct
++{
++  SINT16 subStateIndex;        // Index that signifies datapump substate. (DSP write)
++  UINT8  externalBert;         // Turn on/off external BERT interface. 0 = OFF; 1 = ON. (Host write)
++  UINT8  usBertPattern;        // BERT pattern for US TX data. 0 = 2^15-1; 1 = 2^23-1. (Host write)
++  UINT8  overrideDslLinkLed_f; // Overrides DSP operation of the DSL_LINK LED. (Host write)
++                               //   0 = DSP is in control; 1 = Host is in control.
++  UINT8  dslLinkLedState_f;    // DSL_LINK LED state when override flag has been set. (Host write)
++                               //   DSL_LINK LED will be updated with this value once per frame.
++                               //   LED is active-low: 0 = ON, 1 = OFF.
++  UINT8  overrideDslActLed_f;  // Overrides DSP operation of the DSL_ACT LED. (Host write)
++                               //   0 = DSP is in control; 1 = Host is in control.
++  UINT8  dslActLedState_f;     // DSL_ACT LED state when override flag has been set. (Host write)
++                               //   DSL_ACT LED will be updated with this value once per frame.
++                               //   LED is active-low: 0 = ON, 1 = OFF.
++  UINT8  dGaspLprIndicator_f;  // How LPR signal (GPIO[0]) is to be interpreted. (Host write)
++                               //   0 = LPR is active-low; 1 = LPR is active-high.
++  UINT8  overrideDspLprGasp_f; // Overrides DSP detection of LPR signal to send out DGASP. (Host write)
++                               //   0 = DSP detects LPR; 1 = Host detects LPR and sends "HOST_DGASP" to DSP.
++  UINT8  pcbEnabled;           // DS power cut back
++  UINT8  maxAvgFineGainCtrl_f; // If maxAvgFineGainCtrl_f == 0, then the datapump controls the maximum average fine gain value.
++                               // If maxAvgFineGainCtrl_f == 1, then the host controls the maximum average fine gain value.
++  UINT32 reasonForDrop;        // This field will tell the host what might be the reason for a dropped connection.
++  SINT16 maxAverageFineGain;   // When maxAvgFineGainCtrl_f == 1, the value in maxAverageFineGain is the maximum average fine gain level in 256log2 units.
++  UINT8  reserved1;            // These are for 32-bit alignment.
++  UINT8  reserved2;            // These are for 32-bit alignment.
++} DEV_HOST_modemEnvPublic_t;
++
++
++// -----------------------------
++// Generic structure definition.
++// -----------------------------
++
++typedef struct
++{
++  PSINT8  parameter1_p;
++  PSINT16 parameter2_p;
++  PSINT32 parameter3_p;
++  PUINT8  parameter4_p;
++  PUINT16 parameter5_p;
++  PUINT32 parameter6_p;
++} DEV_HOST_genericStructure_t;
++
++
++// ------------------------------
++// Begin G.hs buffer definitions.
++// ------------------------------
++
++typedef struct
++{
++  UINT8 txBuf[64]; // G.hs xmt buffer
++} DEV_HOST_ghsDspTxBufDef_t;
++
++
++typedef struct
++{
++  UINT8 rxBuf[80]; // G.hs rcv buffer
++} DEV_HOST_ghsDspRxBufDef_t;
++
++// -----------------------------------------
++// Begin Constellation Display definitions.
++// -----------------------------------------
++
++typedef struct
++{
++  UINT32  consDispStartAddr;     // Host write
++  UINT32  consDispCurrentAddr;   // Host write
++  UINT32  consDispBufLen;        // Constellation Buffer Length
++  UINT32  consDispBin;           // Host write, DS band only
++} DEV_HOST_consBufDef_t;
++
++typedef struct
++{
++  PSINT16 buffer1_p;          //DSP write
++  PSINT16 buffer2_p;          //DSP write
++} DEV_HOST_snrBuffer_t;
++
++// --------------------------------------------------------------------------------------
++// Typedef to be used for the DEV_HOST_dspOamSharedInterface_s struct of pointers
++//  (this is used in dev_host_interface.c).
++// NOTE: This struct of pointers is NEVER to be referenced anywhere else in the DSP code.
++// IMPORTANT: Only pointers to other structs go into this struct !!
++// --------------------------------------------------------------------------------------
++typedef struct
++{
++  DEV_HOST_hostIntfcVersionDef_t   *hostIntfcVersion_p;
++  DEV_HOST_dspVersionDef_t         *datapumpVersion_p;
++  DEV_HOST_modemStateBitField_t    *modemStateBitField_p;
++  DEV_HOST_dspWrNegoParaDef_t      *dspWriteNegoParams_p;
++  DEV_HOST_oamWrNegoParaDef_t      *oamWriteNegoParams_p;
++  DEV_HOST_raMsgsDef_t             *raMsgs_p;
++  DEV_HOST_dspWrSuperFrameCntDef_t *dspWriteSuperFrameCnt_p;
++  DEV_HOST_msg_t                   *atucMsg_p;
++  DEV_HOST_msg_t                   *aturMsg_p;
++  DEV_HOST_dspWrSharedTables_t     *dspWrSharedTables_p;
++  DEV_HOST_olayDpDef_t             *olayDpParms_p;
++  DEV_HOST_eocVarDef_t             *eocVar_p;
++  DEV_HOST_clearEocVarDef_t        *clearEocVar_p;
++  DEV_HOST_modemStatsDef_t         *modemStats_p;
++  DEV_HOST_atmStats_t              *atmStats_p;
++  DEV_HOST_mailboxControl_t        *dspHostMailboxControl_p;
++  DEV_HOST_phyPerf_t               *phyPerf_p;
++  DEV_HOST_diagAnlgInputVar_t      *analogInputVar_p;
++  DEV_HOST_diagAnlgOutputVar_t     *analogOutputVar_p;
++  DEV_HOST_hostInterruptMask_t     *hostInterruptMask_p;
++  DEV_HOST_profileBase_t           *profileList_p;
++  DEV_HOST_hostInterruptSource_t   *hostInterruptSource_p;
++  DEV_HOST_dspBitSwapDef_t         *dspBitSwapDstrm_p;
++  DEV_HOST_dspBitSwapDef_t         *dspBitSwapUstrm_p;
++  DEV_HOST_atmDsBert_t             *atmDsBert_p;
++  DEV_HOST_modemEnvPublic_t        *modemEnvPublic_p;
++  DEV_HOST_genericStructure_t      *genericStructure1_p;
++  DEV_HOST_genericStructure_t      *genericStructure2_p;
++  DEV_HOST_ghsDspTxBufDef_t        *ghsDspTxBuf_p;
++  DEV_HOST_ghsDspRxBufDef_t        *ghsDspRxBuf_p;
++  DEV_HOST_consBufDef_t            *consDispVar_p;
++  DEV_HOST_snrBuffer_t             *snrBuffer_p;
++} DEV_HOST_dspOamSharedInterface_t;
++
++
++// ---------------------------------------------------------------------------------
++// Typedef to be used for the pointer to the DEV_HOST_dspOamSharedInterface_s struct
++//  of pointers (this is used in dev_host_interface.c).
++// ---------------------------------------------------------------------------------
++typedef DEV_HOST_dspOamSharedInterface_t *DEV_HOST_dspOamSharedInterfacePtr_t;
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/dev_host_verdef.h linux.dev/drivers/atm/sangam_atm/dev_host_verdef.h
+--- linux.old/drivers/atm/sangam_atm/dev_host_verdef.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dev_host_verdef.h	2005-08-23 04:46:50.091844608 +0200
+@@ -0,0 +1,102 @@
++#ifndef __DEV_HOST_VERDEF_H__
++#define __DEV_HOST_VERDEF_H__ 1
++
++//********************************************************************
++//*
++//*    DMT-BASE ADSL MODEM PROGRAM
++//*    TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
++//*    AMATI CONFIDENTIAL PROPRIETARY
++//*
++//* (c) Copyright April 1999, Texas Instruments Incorporated.
++//*     All Rights Reserved.
++//*
++//*   Property of Texas Instruments Incorporated and Amati Communications Corp.
++//*
++//* Restricted Rights - Use, duplication, or disclosure is subject to
++//* restrictions set forth in TI's and Amati program license agreement and
++//* associated documentation
++//*
++//*********************************************************************
++//*
++//* FILENAME: dev_host_verdef.h
++//*
++//* ABSTRACT: This file defines the version structure
++//*
++//* TARGET:  Non specific.
++//*
++//* TOOLSET:  Non specific.
++//*
++//* ACTIVATION:
++//*
++//* HISTORY:  DATE        AUTHOR   DESCRIPTION
++//*           04/29/99    FLW      Created
++//*           01/17/00    Barnett  Mod's in support of merging NIC
++//*                                hardware rev 6/7 T1.413 codebases.
++//*           01/21/00    Wagner   derfmake mods
++//*           05/11/00    Barnett  hardware_rev is a 2 char string.
++//*           07/24/00    Barnett  Rework as part of host interface redesign.
++//*           11/29/00    Hunt     added chipset_id2
++//*           03/30/01    Barnett  Prefixed all public elements with DSPDP_.
++//*                                This insures uniqueness of names that might
++//*                                match host names by coincidence.
++//*           03/30/01    Barnett  Added DSPDP_Host_VersionDef to facilitate
++//*                                representing a version id for the host i/f
++//*                                separate from the firmware version id as
++//*                                a courtesy to the host.
++//*           07/23/01    JEB      Changed name from verdef_u.h to dpsys_verdef.h
++//*           04/12/02    Barnett  Make timestamp unsigned 32-bit field.
++//*                                Generalizes for all kinds of hosts.
++//*           11/15/02    JEB      Changed name from dpsys_verdef.h to dev_host_verdef.h
++//*                                Updated structs according to coding guidelines
++//*           12/16/02    JEB      Renamed some struct elements for new usage in Ax7
++//*           01/21/03    MCB      Implemented Ax7 UNIT-MODULE modular software framework.
++//*           03/19/03    JEB      Added back in "bugFix" elements into each struct type.
++//*                                Rearranged elements.
++//*
++//********************************************************************
++
++#include "env_def_typedefs.h"
++
++#define DSPDP_FLAVOR_NEWCODES 0xFF // Other values are valid old-style flavors
++
++// ------------------------------
++// ------------------------------
++// Begin DSP version definitions.
++// ------------------------------
++// ------------------------------
++
++typedef struct
++{
++  UINT32 timestamp;    // Number of seconds since 01/01/1970
++  UINT8  major;        // Major "00".00.00.00 revision nomenclature
++  UINT8  minor;        // Minor 00."00".00.00 revision nomenclature
++  UINT8  bugFix;       // Bug Fix 00.00."00".00 revision nomenclature
++  UINT8  buildNum;     // Build Number 00.00.00."00" revision nomenclature
++  UINT8  netService;   // Network service identifier
++  UINT8  chipsetGen;   // chipset generation
++  UINT8  chipsetId;    // chipset identifier
++  UINT8  chipsetId2;   // second byte for "RV" chipset et al.
++  UINT8  hardwareRev1; // hardware revision, 1st char
++  UINT8  hardwareRev2; // hardware revision, 2nd char
++  UINT8  featureCode;  // feature code
++  UINT8  dummy1;       // dummy byte for explicit 32-bit alignment
++} DEV_HOST_dspVersionDef_t;
++
++// -------------------------------
++// -------------------------------
++// Begin host version definitions.
++// -------------------------------
++// -------------------------------
++
++typedef struct
++{
++  UINT8 major;        // Major "00".00.00.00 revision nomenclature
++  UINT8 minor;        // Minor 00."00".00.00 revision nomenclature
++  UINT8 bugFix;       // Bug Fix 00.00."00".00 revision nomenclature
++  UINT8 buildNum;     // Build Number 00.00.00."00" revision nomenclature
++  UINT8 netService;   // Network service identifier
++  UINT8 dummy[3];     // dummy bytes for explicit 32-bit alignment
++} DEV_HOST_hostIntfcVersionDef_t;
++
++
++#endif // __DEV_HOST_VERDEF_H__
+diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_api.c linux.dev/drivers/atm/sangam_atm/dsl_hal_api.c
+--- linux.old/drivers/atm/sangam_atm/dsl_hal_api.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dsl_hal_api.c	2005-08-23 04:46:50.095844000 +0200
+@@ -0,0 +1,3339 @@
++/*******************************************************************************
++* FILE PURPOSE:     DSL Driver API functions for Sangam
++*
++********************************************************************************
++* FILE NAME:        dsl_hal_basicapi.c
++*
++* DESCRIPTION:  
++*       Contains basic DSL HAL APIs for Sangam
++*  
++*                    
++* (C) Copyright 2001-02, Texas Instruments, Inc.
++*    History
++*    Date        Version            Notes
++*    06Feb03     0.00.00            RamP   Original Version Created
++*    10Mar03     0.00.01            RamP   Initial Revision for Modular Code Branch
++*    19Mar03     0.00.02            RamP   Fixed DSL and DSP Version API Structures
++*    20Mar03     0.00.03            RamP   Changed byteswap function names
++*    21Mar03     0.00.03         RamP/ZT   Malloc for DSP f/w done in dslStartup
++*    25Mar03     0.00.04            RamP   Removed statistics used only by SWTC
++*                                          Created Checkpoint 3
++*    26Mar03     0.00.05            RamP   Added Memory allocation for fwimage in
++*                                          dslStartup function.
++*    07Apr03     0.00.06            RamP   Implemented new error reporting scheme
++*                                          Changed Commenting to C style only
++*    09Apr03     0.00.07            RamP   Reorganized code to delete POST_SILICON
++*    10Apr03     0.00.08            RamP   Removed ptidsl from loadFWImage function
++*                                          moved size and fwimage initialization to
++*                                          dslStartup function
++*    14Apr03     0.00.09            RamP   Moved modemStateBitField processing to a
++*                                          support function; deleted stateHistory
++*                                          renamed the REG32 macro
++*    15Apr03     0.00.10            RamP   Changed firmware allocate to shim_ 
++*                                          osAllocateVMemory function
++*    15Apr03     0.00.11            RamP   Changed host version number to 07.00.00.01
++*    16Apr03     0.00.12            RamP   Modified return condition on dslShutdown
++*    16Apr03     0.00.13            RamP   Changed host version number to 07.00.00.02
++*    21Apr03     0.01.00            RamP   Cleaned up dslShutdown function
++*                                          Added new function calls to allocate
++*                (Alpha)                   /free overlay pages for different OS
++*                                          Fixed typecasting for allocate/free fxns
++*                                          Added Interrupt Acknowledge logic
++*    22Apr03     0.01.01            RamP   Moved acknowledgeInterrupt into api
++*                                          Added static global for intr source
++*    24Apr03     0.01.02            RamP   Added processing for OVERLAY_END in
++*                                          DSP message handlers, verified crc32
++*                                          recovery for overlays
++*    28Apr03     0.01.03            RamP   Removed global variable intrSource
++*                                          Added parameter to handleInterrupt fxn
++*                (Alpha Plus)              to indicate interrupt source
++*                                          Changed version number to 01.00.01.00    
++*                                          Fixed setTrainingMode function problem 
++*    07May03     0.01.04            RamP   Removed delineation state check in 
++*                                          message handling functions, added more
++*                                          safety for setting lConnected in TC_SYNC
++*                                          Changed version number to 01.00.01.01                                      
++*    14May03     0.01.05            RamP   Added 3 Switchable Hybrid APIs
++*                                          Added additional statistics us/ds TxPower,
++*                                          us margin,attenuation, us/ds bitallocation
++*                                          moved versioning to dsl_hal_version.h
++*    14May03     0.01.06            RamP   Fixed problem with CMsgs2 parsing
++*    20May03     0.01.07            RamP   Added Inner/Outer pair API support. Added
++*                                          dying gasp message.
++*    29May03     0.01.08         ZT/RamP   Added memory optimizations for overlay pages
++*                                          and coProfiles; added functions to free,
++*                                          reload overlays and profiles
++*    04Jun03     0.01.09            RamP   Added tick counters, fail states reporting
++*                                          Made statistics fixes for higher data rates
++*                                          Added Margin per tone to statistics
++*                                          Added configuration checks for trellis/FEC
++*    06Jun03     0.01.10            RamP   Added LED, STM Bert, dGasp LPR Config APIs
++*                                          Modified interrupt acknowledge logic 
++*                                          Added current hybrid flag as statistic
++*    09Jun03     0.01.11            RamP   Added function to send dying Gasp to Modem
++*                                          fixed problem with reading OamNegoPara var
++*                (Beta)                    fixed problem with reading current config
++*                                          Added function to configure ATM Bert
++*                                          fixed memory leak due to coProfiles
++*                                          Added us/ds R/S FEC statistics
++*                                          Added additional config capability for LED
++*                                          fixed problem in free memory for CO profiles
++*    18Jul03     0.01.12            RamP   Fixed problem with reading modemEnv structure
++*                                          affects LED, DGaspLpr APIs   
++*                                          Sending Dying Gasp from shutdown function
++*    01Aug03     0.01.13            RamP   Added preferred training mode to statistics
++*    13Aug03     0.01.14            MCB    Set rev id for D3/R1.1 (ADSL2).
++*    21Aug03     0.01.15            RamP   Added g.hs and aoc bitswap message gathering
++*                                          Added new references to bits n gains table
++*                                          Decoupled modem idle/retrain from pair select 
++*                                          Added line length and gross gain to statistics 
++*    29Sep03     0.01.16            RamP   Replaced advcfg function calls with support
++*                                          module function switches
++*    01Oct03     0.01.17            RamP   Added enum translation to set training mode
++*                                          & to read statistics
++*    08Oct03     0.01.18            RamP   Fixed problems with usTxPower statistic in 
++*                                          Annex B target, fixed problem with Trellis
++*    12Oct03     0.01.19            RamP   Added API calls to gather ADSL2 Messages
++*    29Oct03     0.01.20            RamP   Restored TC_SYNC detect logic
++*    30Oct03     0.01.21            RamP   Removed Scaling factor for adsl2DSConRate
++*                                          Setting Showtime state upon DSP_ACTIVE
++*    14Nov03     0.01.22            RamP   Fixed scaling for usTxPower & dsTxPower
++*    14Nov03     0.01.23            RamP   Added logic to gather CRates1/RRates1
++*                                          by parsing DSP_CRATES1
++*    20Nov03     0.01.24            RamP   Added generic & interface Read
++*                                          and Write functions to read from 
++*                                          DSP - Host Interface
++*    24Nov03     0.01.25            RamP   Modified interface Read/Write functions
++*                                          to seperate element offsets from pointers
++*    19Dec03     0.01.26            RamP   Modified pointer accessing problems with
++*                                          block read functions
++*    26Dec03     0.01.27            RamP   Made ghsIndex a local variable & added 
++*                                          check to avoid buffer overflow     
++*    30Dec03     0.01.28            RamP   Added generic mailbox command function
++*******************************************************************************/
++#include "dsl_hal_register.h"
++#include "dsl_hal_support.h"
++#include "dsl_hal_logtable.h"
++#include "dsl_hal_version.h"
++
++static unsigned int hybrid_selected;
++static unsigned int showtimeFlag = FALSE;
++
++#ifdef PRE_SILICON
++/*********************************************/
++/*   Base Addresses                          */
++/*********************************************/
++#define DEV_MDMA_BASE                 0x02000500
++
++/*********************************************/
++/*   MC DMA Control Registers in DSL         */
++/*********************************************/
++
++#define DEV_MDMA0_SRC_ADDR         (DEV_MDMA_BASE + 0x00000000)
++#define DEV_MDMA0_DST_ADDR         (DEV_MDMA_BASE + 0x00000004)
++#define DEV_MDMA0_CTL_ADDR         (DEV_MDMA_BASE + 0x00000008)
++#define DEV_MDMA1_SRC_ADDR         (DEV_MDMA_BASE + 0x00000040)
++#define DEV_MDMA1_DST_ADDR         (DEV_MDMA_BASE + 0x00000044)
++#define DEV_MDMA1_CTL_ADDR         (DEV_MDMA_BASE + 0x00000048)
++#define DEV_MDMA2_SRC_ADDR         (DEV_MDMA_BASE + 0x00000080)
++#define DEV_MDMA2_DST_ADDR         (DEV_MDMA_BASE + 0x00000084)
++#define DEV_MDMA2_CTL_ADDR         (DEV_MDMA_BASE + 0x00000088)
++#define DEV_MDMA3_SRC_ADDR         (DEV_MDMA_BASE + 0x000000C0)
++#define DEV_MDMA3_DST_ADDR         (DEV_MDMA_BASE + 0x000000C4)
++#define DEV_MDMA3_CTL_ADDR         (DEV_MDMA_BASE + 0x000000C8)
++
++#define DEV_MDMA0_SRC           (*((volatile UINT32 *) DEV_MDMA0_SRC_ADDR))
++#define DEV_MDMA0_DST           (*((volatile UINT32 *) DEV_MDMA0_DST_ADDR))
++#define DEV_MDMA0_CTL           (*((volatile UINT32 *) DEV_MDMA0_CTL_ADDR))
++#define DEV_MDMA1_SRC           (*((volatile UINT32 *) DEV_MDMA1_SRC_ADDR))
++#define DEV_MDMA1_DST           (*((volatile UINT32 *) DEV_MDMA1_DST_ADDR))
++#define DEV_MDMA1_CTL           (*((volatile UINT32 *) DEV_MDMA1_CTL_ADDR))
++#define DEV_MDMA2_SRC           (*((volatile UINT32 *) DEV_MDMA2_SRC_ADDR))
++#define DEV_MDMA2_DST           (*((volatile UINT32 *) DEV_MDMA2_DST_ADDR))
++#define DEV_MDMA2_CTL           (*((volatile UINT32 *) DEV_MDMA2_CTL_ADDR))
++#define DEV_MDMA3_SRC           (*((volatile UINT32 *) DEV_MDMA3_SRC_ADDR))
++#define DEV_MDMA3_DST           (*((volatile UINT32 *) DEV_MDMA3_DST_ADDR))
++#define DEV_MDMA3_CTL           (*((volatile UINT32 *) DEV_MDMA3_CTL_ADDR))
++
++/* MDMA control bits                     */
++
++#define DEV_MDMA_START             0x80000000
++#define DEV_MDMA_STOP              0x00000000
++#define DEV_MDMA_STATUS            0x40000000
++#define DEV_MDMA_DST_INC           0x00000000
++#define DEV_MDMA_DST_FIX           0x02000000   
++#define DEV_MDMA_SRC_INC           0x00000000
++#define DEV_MDMA_SRC_FIX           0x00800000 
++#define DEV_MDMA_BURST1            0x00000000
++#define DEV_MDMA_BURST2            0x00100000
++#define DEV_MDMA_BURST4            0x00200000 
++
++#define DEV_MDMA_LEN_SHF           2
++#define DEV_MDMA_LEN_MASK          0x0000FFFF
++
++#define DMA0   0
++#define DMA1   1
++#define DMA2   2
++#define DMA3   3
++#endif
++#ifdef DMA
++SINT32 getDmaStatus(UINT32 mask)
++{
++  if(!(IFR & mask))
++  {
++   return DSLHAL_ERROR_NO_ERRORS;
++  }
++  else
++  {
++   ICR = mask ;
++   return 1 ;
++  }
++}
++
++void programMdma(UINT32 dma, UINT32 source, UINT32 destination, UINT32 length, UINT32 wait)
++{
++  volatile UINT32 statusMask ;
++
++  switch(dma)
++  {
++  case DMA0:
++    {
++      DEV_MDMA0_SRC = source ;
++      DEV_MDMA0_DST = destination ;
++      DEV_MDMA0_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
++                       DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
++      statusMask = 0x00000010 ;
++    }
++    break ;
++  case DMA1:
++    {
++          DEV_MDMA1_SRC = source ;
++          DEV_MDMA1_DST = destination ;
++          DEV_MDMA1_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
++                           DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
++          statusMask = 0x00000020 ;
++        }
++    break ;
++  case DMA2:
++    {
++          DEV_MDMA2_SRC = source ;
++          DEV_MDMA2_DST = destination ;
++          DEV_MDMA2_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
++                           DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
++          statusMask = 0x00000040 ;
++        }
++    break ;
++  case DMA3:
++    {
++          DEV_MDMA3_SRC = source ;
++          DEV_MDMA3_DST = destination ;
++          DEV_MDMA3_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
++                           DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
++          statusMask = 0x00000080 ;
++        }
++    break ;
++
++  }
++
++  if(wait)
++  {
++    while(!(getDmaStatus(statusMask))) ;
++  }
++
++}
++#endif
++
++
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_dslStartup
++*
++*******************************************************************************************
++* DESCRIPTION: Entry point to initialize and load ax5 daughter board
++*
++* INPUT:   PITIDSLHW_T *ppIHw  
++*
++* RETURN:  0 --succeeded
++*          1 --Failed
++*
++*****************************************************************************************/
++
++int dslhal_api_dslStartup(PITIDSLHW_T *ppIHw)
++{
++  
++  ITIDSLHW_T *ptidsl;
++  int  i;
++  int rc;
++  dprintf(4,"dslhal_api_dslStartup() NEW 1\n");
++  
++  ptidsl=(ITIDSLHW_T *)shim_osAllocateMemory(sizeof(ITIDSLHW_T));
++  if(ptidsl==NULL)
++    {
++    dprintf(1, "unable to allocate memory for ptidsl\n");
++    return 1;
++    }
++  *ppIHw=ptidsl;
++  shim_osZeroMemory((char *) ptidsl, sizeof(ITIDSLHW_T));
++
++  /* Unreset the ADSL Subsystem  */
++  rc=dslhal_support_unresetDslSubsystem();
++  if(rc)
++    {
++    dprintf(1, "unable to reset ADSL Subsystem \n");
++    shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
++    return DSLHAL_ERROR_UNRESET_ADSLSS;
++    }
++  ptidsl->fwimage = shim_osAllocateVMemory(DSP_FIRMWARE_MALLOC_SIZE);
++  if(!ptidsl->fwimage)
++    {
++      dprintf(1,"Failed to Allocate Memory for DSP firmware binary \n");
++      return DSLHAL_ERROR_FIRMWARE_MALLOC;
++    }
++  /* read firmware file from flash   */
++  rc=shim_osLoadFWImage(ptidsl->fwimage);
++  if(rc<0)
++    {
++    dprintf(1, "unable to get fw image\n");
++    shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
++    shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
++    return DSLHAL_ERROR_NO_FIRMWARE_IMAGE;
++    }
++  else
++    {
++      ptidsl->imagesize = rc;
++     }
++  /* Compute the CRC checksum on the image and validate the image */
++
++  /* Validate the image in the RAM */
++
++  /* load fw to DSP  */
++ 
++  if(dslhal_support_hostDspCodeDownload(ptidsl))
++    {
++    dprintf(0,"dsp load error\n");
++    for(i=0; i<NUM_PAGES; i++)
++      {
++      if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
++        {
++        shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, 
++                     ptidsl->olayDpPage[i].OverlayXferCount);
++        }
++      }
++     if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
++      shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
++     if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
++      shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
++    shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
++    shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
++    return DSLHAL_ERROR_CODE_DOWNLOAD;
++    }
++  
++  /* set flag to indicated overlay pages are loaded */
++  ptidsl->bOverlayPageLoaded = 1;
++  /* set auto retrain to 1 to disble the overlay page reload */
++  ptidsl->bAutoRetrain = 1;
++
++  /* unreset Raptor */
++  /* change this to new function */ 
++  /* This function should basically bring DSP out of reset bit 23  of PRCR */
++  /* Function is ready but bypassed for Pre-Silicon */
++   
++  rc=dslhal_support_unresetDsp();
++  if (rc)
++    {
++    dprintf(0,"unable to bring DSP out of Reset\n");
++    for(i=0; i<NUM_PAGES; i++)
++      {
++      if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
++        {
++        shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, 
++                     ptidsl->olayDpPage[i].OverlayXferCount);
++        }
++      }
++    if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
++      shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
++     if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
++      shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
++    shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
++    shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
++    return DSLHAL_ERROR_UNRESET_DSP;
++    }
++  shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
++  dprintf(4,"dslhal_api_dslStartup() done\n");
++
++  /* Add the code to initialize the host interface variables */
++  /* Add code to tickle the host interface */
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++
++/******************************************************************************************
++ * FUNCTION NAME:    dslhal_api_dslShutdown
++ *
++ *******************************************************************************************
++ * DESCRIPTION: routine to shutdown ax5 modem and free the resource
++ *
++ * INPUT:   tidsl_t *ptidsl  
++ *
++ * RETURN:  NULL
++ *          
++ *
++ *****************************************************************************************/
++
++int dslhal_api_dslShutdown(tidsl_t *ptidsl)
++{
++  int rc= DSLHAL_ERROR_NO_ERRORS;
++  int i;
++  
++  dprintf(5, "dslhal_api_dslShutdown\n");
++  rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DSLSS_SHUTDOWN, 0, 0, 0);  
++  if(rc)
++    {
++     dprintf(1, " unable to reset DSP \n");
++     rc = DSLHAL_ERROR_RESET_DSP;
++    }
++  /* DSP need 50 ms to send out the message*/
++
++  shim_osClockWait(60 * 1000);
++
++  rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DGASP, 0, 0, 0);
++  
++  /* free memory allocated*/
++
++  for(i=0; i<NUM_PAGES; i++)
++    {
++    if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
++      {
++      shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, 
++                   ptidsl->olayDpPage[i].OverlayXferCount);
++      }
++    }
++  if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
++     shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
++  if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
++     shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
++  shim_osFreeMemory((void *)ptidsl, sizeof(tidsl_t));  
++  rc = dslhal_support_resetDsp();
++  if(rc)
++    {
++     dprintf(1, " unable to reset ADSL subsystem \n");
++     rc = DSLHAL_ERROR_RESET_DSP;
++    }
++  rc = dslhal_support_resetDslSubsystem();
++  if(rc)
++    {
++     dprintf(1, " unable to reset ADSL subsystem \n");
++     rc = DSLHAL_ERROR_RESET_ADSLSS;
++    }
++return rc; 
++}
++  
++ 
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_getDslHalVersion
++*
++*******************************************************************************************
++* DESCRIPTION: This routine supply DSL Driver version.
++*
++* INPUT:  tidsl_t * ptidsl
++*         void *pVer, DSP Driver Version Pointer
++*         
++* RETURN:  0 --succeeded
++*          1 --Failed
++* Note: See verdef_u.h for version structure definition.
++*****************************************************************************************/
++
++void dslhal_api_getDslHalVersion(void  *pVer)
++{
++  dslVer *pVersion;
++  pVersion = (dslVer *)pVer;
++  pVersion->major = (unsigned char) DSLHAL_VERSION_MAJOR;
++  pVersion->minor = (unsigned char) DSLHAL_VERSION_MINOR;
++  pVersion->bugfix = (unsigned char) DSLHAL_VERSION_BUGFIX;
++  pVersion->buildNum = (unsigned char) DSLHAL_VERSION_BUILDNUM;
++  pVersion->timeStamp = (unsigned char) DSLHAL_VERSION_TIMESTAMP;  
++}
++  
++/********************************************************************************************
++ * FUNCTION NAME: dslhal_api_pollTrainingStatus()
++ *
++ *********************************************************************************************
++ * DESCRIPTION: code to decode modem status and to start modem training 
++ * Input: tidsl_t *ptidsl
++ * 
++ * Return: modem status   
++ *         -1    failed
++ *
++ ********************************************************************************************/
++
++int dslhal_api_pollTrainingStatus(tidsl_t *ptidsl)
++{
++  int cmd;
++  int tag;
++  int parm1,parm2;
++  int rc;
++  unsigned int failState;
++  static unsigned int pollGhsIndex=0;
++
++  /*char *tmp;*/
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++#if SWTC
++  DEV_HOST_tcHostCommDef_t          TCHostCommDef;
++#endif
++  
++  dprintf(5,"dslhal_api_pollTrainingStatus\n");
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++#if SWTC
++  dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, 
++                                    &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++#endif
++  
++  rc = dslhal_support_processTrainingState(ptidsl);
++  if(rc)
++    {
++      dprintf(0,"Error Reading Modem Training State \n");
++      return DSLHAL_ERROR_MODEMSTATE;
++    }
++  rc = dslhal_support_processModemStateBitField(ptidsl);
++  if(rc)
++    {
++      dprintf(0,"Error Reading Modem Training State \n");
++      return DSLHAL_ERROR_MODEMSTATE;
++    }
++  /*
++  rc = dslhal_support_readDelineationState(ptidsl);
++  if(rc)
++    {
++      dprintf(0,"Error Reading Delineation State \n");
++      return DSLHAL_ERROR_MODEMSTATE;
++    }
++  */
++  while (dslhal_support_readDspMailbox(ptidsl,&cmd, &tag, &parm1, &parm2) == DSLHAL_ERROR_NO_ERRORS )
++    {
++    dprintf(4,"mailbox message: 0x%x\n", cmd);
++    /*    
++    for(rc=0;rc<8;rc++)
++      {
++        dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
++      }
++    */ 
++
++    if (cmd == DSP_IDLE) 
++      {
++      dprintf(4,"DSP_IDLE\n");
++      ptidsl->lConnected=0; 
++      hybrid_selected=888;
++      /* add code for reload overlay pages */
++      if(ptidsl->bAutoRetrain == 0)
++       {
++         while(ptidsl->bOverlayPageLoaded == 0)
++         {
++           shim_osClockWait(6400);
++         }
++         //dslhal_support_restoreTrainingInfo(ptidsl);
++         //ptidsl->bOverlayPageLoaded = 1;
++       }
++      /* command DSP to ACTREQ */
++      if(showtimeFlag == TRUE)
++        {
++           dslhal_api_resetTrainFailureLog(ptidsl);
++           dslhal_support_advancedIdleProcessing(ptidsl);
++           showtimeFlag = FALSE;
++        }
++      failState = (unsigned int)parm1;
++      if(failState!=0)
++        {
++          ptidsl->AppData.trainFailStates[ptidsl->AppData.trainFails]=failState;
++          ptidsl->AppData.trainFails++;
++          if(ptidsl->AppData.trainFails > 30)
++             ptidsl->AppData.trainFails=0;
++        }
++      for(pollGhsIndex=0;pollGhsIndex<10;pollGhsIndex++)
++        {
++          for(rc=0;rc<62;rc++)
++            ptidsl->AppData.dsl_ghsRxBuf[pollGhsIndex][rc]=0;
++        }  
++      pollGhsIndex=0;
++      rc = dslhal_support_writeHostMailbox(ptidsl,HOST_ACTREQ, 0, 0, 0);
++      if (rc)
++        return DSLHAL_ERROR_MAILBOX_WRITE;
++      }
++
++    if(cmd == DSP_ATM_TC_SYNC)
++      {
++      dprintf(4,"\nTC_SYNC\n");
++      showtimeFlag = TRUE;
++      ptidsl->lConnected=1; 
++      if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 1)
++       {
++         dslhal_support_clearTrainingInfo(ptidsl);
++         ptidsl->bOverlayPageLoaded = 0;
++        }
++      }
++    if(cmd == DSP_ACTIVE)
++      {
++      dprintf(4,"DSP_ACTIVE");
++      ptidsl->lConnected=0;
++      ptidsl->AppData.bState = RSTATE_SHOWTIME;
++      dprintf(4,"US Connect Rate: %u \n",ptidsl->AppData.USConRate);
++      dprintf(4,"DS Connect Rate: %u \n",ptidsl->AppData.DSConRate);
++      }
++    if(cmd == DSP_ATM_NO_TC_SYNC)
++      {
++      dprintf(4,"\nTC_NOSYNC\n");
++      ptidsl->lConnected=0; 
++      }
++    if(cmd == DSP_DGASP)
++      {
++      dprintf(0,"\n GASP!!! \n");
++      }          
++    if(cmd == DSP_OVERLAY_END)
++       {
++         dprintf(4,"Overlay Page Done %d \n",tag);
++         rc = dslhal_support_checkOverlayPage(ptidsl,tag);
++         if(rc == DSLHAL_ERROR_OVERLAY_CORRUPTED)
++          {
++            dprintf(0,"Overlay Page: %d CORRUPTED \n",tag);
++            return (0-DSLHAL_ERROR_OVERLAY_CORRUPTED);
++          }
++        }   
++    if(cmd == DSP_HYBRID)
++       {
++         dprintf(2,"Hybrid Metrics Available: %d\n",tag);
++         hybrid_selected = tag;
++       }
++    if(cmd == DSP_DGASP)
++      {
++      dprintf(0,"\n GASP!!! \n");
++      }   
++    if(cmd == DSP_XMITBITSWAP)
++      {
++       dslhal_support_aocBitSwapProcessing(ptidsl,0);
++      }
++    if(cmd == DSP_RCVBITSWAP)
++      {
++       dslhal_support_aocBitSwapProcessing(ptidsl,1);
++      }
++    if(cmd == DSP_GHSMSG)
++      {
++       dprintf(3,"Ghs Message Received, bytes: %d \n",tag);
++       dprintf(3,"Addr: 0x%x\n",dspOamSharedInterface.ghsDspRxBuf_p);
++       if(pollGhsIndex > 9)
++           pollGhsIndex=0;
++       rc = dslhal_support_blockRead((void *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.ghsDspRxBuf_p), &ptidsl->AppData.dsl_ghsRxBuf[pollGhsIndex++][0], tag);
++      }
++    if(cmd == DSP_CRATES1)
++      {
++       dprintf(3,"DSP C-Rates1 Data Ready \n");
++       rc = dslhal_support_gatherRateMessages(ptidsl);
++      }
++    if(cmd == DSP_SNR)
++      {
++       dprintf(3,"DSP SNR Data Ready \n");
++       rc = dslhal_support_gatherSnrPerBin(ptidsl,tag);
++      }
++    if(cmd == DSP_EOC)
++      {
++       dprintf(3,"DSP_EOC message \n"); 
++       rc = dslhal_support_gatherEocMessages(ptidsl,tag,parm1,parm2);
++      }
++    
++    if(cmd == DSP_TRAINING_MSGS)
++      {
++       dprintf(3,"DSP_TRAINING_MSGS \n"); 
++       rc = dslhal_support_gatherAdsl2Messages(ptidsl,tag,parm1,parm2);
++      }
++    }
++  dprintf(6,"dslhal_api_pollTrainingStatus done\n");
++  return(ptidsl->AppData.bState);
++  
++}  /* end of dslhal_api_pollTrainingStatus() */
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_handleTrainingInterrupt()
++*
++*********************************************************************************************
++* DESCRIPTION: Code to handle ax5 hardware interrupts
++*
++* Input: tidsl_t *ptidsl
++*        int *pMsg, pointer to returned hardware messages. Each byte represent a messge
++*        int *pTag, pointer to returned hardware message tags. Each byte represent a tag.
++* Return: 0    success  
++*         1    failed
++*
++********************************************************************************************/
++int dslhal_api_handleTrainingInterrupt(tidsl_t *ptidsl, int intrSource)
++{
++  int cmd;
++  int tag;
++  int parm1,parm2;
++  unsigned int msg1;
++  unsigned int msg2;
++  int rc;
++  unsigned int failState;
++  static unsigned int interruptGhsIndex=0;
++    /*char *tmp;*/
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++#if SWTC
++  DEV_HOST_tcHostCommDef_t          TCHostCommDef;
++#endif
++  dprintf(6,"dslhal_api_handleTrainingInterrupt\n");
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++#if SWTC
++  dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, 
++                                    &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++#endif
++  
++  if(intrSource & MASK_BITFIELD_INTERRUPTS)
++    {
++      dspOamSharedInterface.modemStateBitField_p =(DEV_HOST_modemStateBitField_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStateBitField_p);
++      rc = dslhal_support_processTrainingState(ptidsl);
++      if(rc)
++       {
++        dprintf(0,"Error Reading Modem Training State \n");
++        return DSLHAL_ERROR_MODEMSTATE;
++        }
++       rc = dslhal_support_processModemStateBitField(ptidsl);
++       if(rc)
++       {
++        dprintf(0,"Error Reading Modem Training State \n");
++        return DSLHAL_ERROR_MODEMSTATE;
++        }
++    }
++  if(intrSource & MASK_MAILBOX_INTERRUPTS)
++    {
++      /*
++       rc = dslhal_support_readDelineationState(ptidsl); 
++       if(rc)
++       {
++         dprintf(0,"Error Reading Delineation State \n");
++         return DSLHAL_ERROR_MODEMSTATE;
++        }
++      */
++       while (dslhal_support_readDspMailbox(ptidsl,&cmd, &tag, &parm1, &parm2) == DSLHAL_ERROR_NO_ERRORS )
++       {
++         dprintf(4,"mailbox message: 0x%x\n", cmd);
++         /*    
++         for(rc=0;rc<8;rc++)
++         {
++           dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
++         }
++          */ 
++         if (cmd == DSP_IDLE) 
++         {
++           dprintf(4,"DSP_IDLE\n");
++           ptidsl->lConnected=0;
++           hybrid_selected=888;
++           if(showtimeFlag == TRUE)
++           {
++             dslhal_api_resetTrainFailureLog(ptidsl);
++             dslhal_support_advancedIdleProcessing(ptidsl);
++             showtimeFlag = FALSE;
++            }
++           failState = (unsigned int)parm1;
++           if(failState!=0)
++           {
++             ptidsl->AppData.trainFailStates[ptidsl->AppData.trainFails]=failState;
++             ptidsl->AppData.trainFails++;
++             if(ptidsl->AppData.trainFails > 30)
++               ptidsl->AppData.trainFails=0;
++            }
++           for(interruptGhsIndex=0;interruptGhsIndex<10;interruptGhsIndex++)
++             {
++               for(rc=0;rc<62;rc++)
++                 ptidsl->AppData.dsl_ghsRxBuf[interruptGhsIndex][rc]=0;
++             }  
++           interruptGhsIndex=0;
++
++           /* add code for reload overlay pages */
++           if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 0)
++             {
++             dslhal_support_restoreTrainingInfo(ptidsl);
++             ptidsl->bOverlayPageLoaded = 1;
++             }
++           /* command DSP to ACTREQ */
++           rc = dslhal_support_writeHostMailbox(ptidsl, HOST_ACTREQ, 0, 0, 0);
++           if (rc)
++             return DSLHAL_ERROR_MAILBOX_WRITE;
++         }
++         if(cmd == DSP_ATM_TC_SYNC)
++           {
++           dprintf(4,"\nTC_SYNC\n");
++           showtimeFlag = TRUE;
++           ptidsl->lConnected=1;
++           if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 1)
++             {
++             dslhal_support_clearTrainingInfo(ptidsl);
++             ptidsl->bOverlayPageLoaded = 0;
++             }
++           }
++         if(cmd == DSP_ACTIVE)
++           {
++             ptidsl->lConnected=0;
++             ptidsl->AppData.bState = RSTATE_SHOWTIME;
++             dprintf(4,"DSP_ACTIVE");
++             dprintf(4,"US Connect Rate: %u \n",ptidsl->AppData.USConRate);
++             dprintf(4,"DS Connect Rate: %u \n",ptidsl->AppData.DSConRate);
++           }
++         if(cmd == DSP_ATM_NO_TC_SYNC)
++           {
++             dprintf(4,"\nTC_NOSYNC\n");
++             ptidsl->lConnected=0;
++             /* add code for reload overlay pages */
++           }
++         if(cmd == DSP_OVERLAY_END)
++           {
++             dprintf(4,"Overlay Page Done %d \n",tag);
++             rc = dslhal_support_checkOverlayPage(ptidsl,tag);
++             if(rc == DSLHAL_ERROR_OVERLAY_CORRUPTED)
++               {
++                 dprintf(4,"Overlay Page: %d CORRUPTED \n",tag);
++                 return(0-DSLHAL_ERROR_OVERLAY_CORRUPTED);
++               }
++           }
++         if(cmd == DSP_HYBRID)
++           {
++             dprintf(2,"Hybrid Metrics Available\n");
++             hybrid_selected = tag;
++           }
++         if(cmd == DSP_XMITBITSWAP)
++           {
++            rc = dslhal_support_aocBitSwapProcessing(ptidsl,0);
++           }
++         if(cmd == DSP_RCVBITSWAP)
++           {
++            rc = dslhal_support_aocBitSwapProcessing(ptidsl,1);
++           }
++         if(cmd == DSP_GHSMSG)
++           {
++            dprintf(3,"Ghs Message Received, bytes: %d \n",tag);
++            dprintf(3,"Addr: 0x%x\n",dspOamSharedInterface.ghsDspRxBuf_p);
++            if(interruptGhsIndex > 9)
++              interruptGhsIndex=0;
++            rc = dslhal_support_blockRead((void *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.ghsDspRxBuf_p), &ptidsl->AppData.dsl_ghsRxBuf[interruptGhsIndex++][0], tag);
++            }
++         if(cmd == DSP_CRATES1)
++          {
++           dprintf(3,"DSP C-Rates1 Data Ready \n");
++           rc = dslhal_support_gatherRateMessages(ptidsl);
++          }
++         if(cmd == DSP_SNR)
++          {
++           dprintf(3,"DSP SNR Data Ready \n");
++           rc = dslhal_support_gatherSnrPerBin(ptidsl,tag);
++          }
++         if(cmd == DSP_EOC)
++          {
++           dprintf(3,"DSP_EOC message \n");
++           rc = dslhal_support_gatherEocMessages(ptidsl,tag,parm1,parm2);
++          }
++         if(cmd == DSP_TRAINING_MSGS)
++          {
++           dprintf(3,"DSP_TRAINING_MSGS \n"); 
++           rc = dslhal_support_gatherAdsl2Messages(ptidsl,tag,parm1,parm2);
++          }
++        }       
++     
++       dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
++       dprintf(5,"Text Message Part1: 0x%x \t Text Message Part2: 0x%x \n",msg1,msg2);
++    }     
++  dprintf(6,"dslhal_api_handleTrainingInterrupt done\n");
++  return(ptidsl->AppData.bState);
++} /* end of dslhal_api_handleTrainingInterrupt() */
++
++  
++
++
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_dslRetrain(tidsl_t *ptidsl)    
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction sends CMD_ACTREQ to the DSP to issue a retrain    
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl    
++ *           
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *      
++ *****************************************************************************************/    
++unsigned int dslhal_api_dslRetrain(tidsl_t *ptidsl)
++{
++   int rc; 
++   
++   dprintf(5, "dslhal_cfg_dslRetrain \n"); 
++   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_QUIET, 0, 0, 0); 
++   if(rc)
++    {  
++      dprintf(1,"dslhal_cfg_dslRetrain failed\n");  
++      return DSLHAL_ERROR_CTRL_API_FAILURE;  
++    }  
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_sendQuiet(tidsl_t *ptidsl)    
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP    
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl    
++ *           
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *      
++ *****************************************************************************************/    
++unsigned int dslhal_api_sendQuiet(tidsl_t *ptidsl)
++{
++   int rc; 
++   
++   dprintf(5, "dslhal_api_sendQuiet\n"); 
++   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_QUIET, 0, 0, 0); 
++   if(rc)
++    {  
++      dprintf(1,"dslhal_api_sendQuiet failed\n");  
++      return DSLHAL_ERROR_CTRL_API_FAILURE;    
++    }  
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************     
++ * FUNCTION NAME:    dslhal_api_sendIdle(tidsl_t *ptidsl)     
++ *     
++ *******************************************************************************************     
++ * DESCRIPTION: This fuction sends the CMD_IDLE message to the DSP     
++ *     
++ * INPUT:  PITIDSLHW_T *ptidsl     
++ *            
++ * RETURN: 0 SUCCESS     
++ *         1 FAILED     
++ *       
++ *****************************************************************************************/     
++unsigned int dslhal_api_sendIdle(tidsl_t *ptidsl) 
++{ 
++   int rc;  
++    
++   dprintf(5, "dslhal_api_sendIdle\n");  
++   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_IDLE, 0, 0, 0);  
++   if(rc) 
++     {   
++      dprintf(1,"dslhal_api_sendIdle failed\n");   
++      return DSLHAL_ERROR_CTRL_API_FAILURE;    
++     }   
++    return DSLHAL_ERROR_NO_ERRORS; 
++} 
++
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_sendDgasp(tidsl_t *ptidsl)    
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction sends the HOST_DGASP message to the DSP    
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl    
++ *           
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *      
++ *****************************************************************************************/    
++unsigned int dslhal_api_sendDgasp(tidsl_t *ptidsl)
++{
++   int rc; 
++   
++   dprintf(5, "dslhal_api_sendDgasp\n"); 
++   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DGASP, 0, 0, 0); 
++   if(rc)
++    {  
++      dprintf(1,"dslhal_api_sendDgasp failed\n");  
++      return DSLHAL_ERROR_CTRL_API_FAILURE;    
++    }  
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Desired Training Mode {None/Multimode/G.dmt/lite
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int trainmode :Should be between 0 and 4; 0:No Mode 1:Multimode
++*                                 2: T1.413, 3:G.dmt, 4: G.lite
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
++{
++   DEV_HOST_oamWrNegoParaDef_t NegoPara;
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;
++   dprintf(5," dslhal_api_setTrainingMode()\n");
++   if(trainmode>255)
++     {
++       dprintf(3,"Invalid Value for Desired Training Mode (must be <255)\n");
++       return DSLHAL_ERROR_INVALID_PARAM;
++     }
++
++   if(!ptidsl)
++    {
++      dprintf(3, "Error: PTIDSL pointer invalid\n");
++      return DSLHAL_ERROR_INVALID_PARAM;
++    }
++
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
++
++   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  /* Enum Translation to maintain backwards compatibility for train modes */
++  if(trainmode == DSLTRAIN_MULTI_MODE)
++    trainmode = MULTI_MODE;
++  if(trainmode == DSLTRAIN_T1413_MODE)
++    trainmode = T1413_MODE;
++  if(trainmode == DSLTRAIN_GDMT_MODE)
++    trainmode = GDMT_MODE;
++   
++  NegoPara.stdMode = trainmode;
++  dprintf(5,"Train Mode: 0x%x\n",trainmode); 
++  rc = dslhal_support_blockWrite(&NegoPara,(PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++ 
++  dprintf(5," dslhal_api_setTrainingMode() Done\n");
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_getDspVersion
++*
++*******************************************************************************************
++* DESCRIPTION: This routine supply AX5 daugther card DSP version.
++*
++* INPUT:  tidsl_t * ptidsl
++*         void *pVer, DSP version struct is returned starting at this pointer
++*         
++* RETURN:  0 --succeeded
++*          1 --Failed
++* Note: See verdef_u.h for version structure definition.
++*****************************************************************************************/
++int dslhal_api_getDspVersion(tidsl_t *ptidsl, void  *pVer)
++{
++  /*  DEV_HOST_dspVersionDef_t  dspVersion; */
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;
++   dprintf(5, "dslhal_api_getDspVersion\n");
++   if(!ptidsl)
++     {
++       dprintf(3, "Error: PTIDSL pointer invalid\n");
++       return DSLHAL_ERROR_INVALID_PARAM;
++     }
++   if(!pVer)
++     return DSLHAL_ERROR_INVALID_PARAM;
++   
++   *(unsigned int *) pVer = 0;
++ 
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.datapumpVersion_p = (DEV_HOST_dspVersionDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.datapumpVersion_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.datapumpVersion_p,
++                                      pVer, sizeof(dspVer));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++  pVer = (DEV_HOST_dspVersionDef_t *)(dslhal_support_byteSwap32((unsigned int)pVer)); 
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_gatherStatistics()
++*
++*********************************************************************************************
++* DESCRIPTION: Read statistical infromation from ax5 modem daugter card. 
++* Input: tidsl_t *ptidsl
++* 
++* Return: 0    success
++*         1    failed
++*
++********************************************************************************************/
++void dslhal_api_gatherStatistics(tidsl_t * ptidsl)
++{
++  int rc,optIdxU,optIdxD,i; 
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  DEV_HOST_dspWrNegoParaDef_t   rateparms;
++  DEV_HOST_oamWrNegoParaDef_t   configParms;
++  DEV_HOST_modemStatsDef_t      StatisticsDef;
++  DEV_HOST_errorStats_t usIntlvError, usFastError, dsIntlvError, dsFastError;
++  DEV_HOST_atmStats_t           atmStats;
++  DEV_HOST_usAtmStats_t         usAtmStats0, usAtmStats1;
++  DEV_HOST_dsAtmStats_t         dsAtmStats0,dsAtmStats1;
++  DEV_HOST_dspWrSuperFrameCntDef_t   SuperFrameCnt;
++  DEV_HOST_msg_t                atuc_msg, aturMsg;
++  DEV_HOST_eocVarDef_t          eocVar;
++  DEV_HOST_dspWrSharedTables_t  sharedTables;
++  DEV_HOST_phyPerf_t            phyPerf;
++  unsigned char                 usBits[64],dsBits[256];
++  unsigned char                 dsPowerCutBack;
++  int                           usNumLoadedTones=0, dsNumLoadedTones=0;
++
++  dprintf(5, "dslhal_api_gatherStatistics\n");
++  
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++  
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++  if(!ptidsl->bStatisticsInitialized && ptidsl->lConnected == LINE_CONNECTED)
++  {
++    dslhal_api_initStatistics(ptidsl);
++    ptidsl->bStatisticsInitialized = TRUE;
++  }
++
++  dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p, 
++                               &rateparms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++  if(!rc) 
++    {    
++      /* trained mode */
++    ptidsl->AppData.dsl_modulation = (unsigned int)rateparms.trainMode;
++    if(rateparms.trainMode == T1413_MODE)
++      ptidsl->AppData.dsl_modulation = DSLTRAIN_T1413_MODE;
++    if(rateparms.trainMode == GDMT_MODE)
++      ptidsl->AppData.dsl_modulation = DSLTRAIN_GDMT_MODE;
++      /* rate */
++    /*    shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)rateparms.cRates1, 120); */
++    ptidsl->AppData.bCRates2 = rateparms.cRates2;
++    /*    shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)rateparms.rRates1, 44); */
++    ptidsl->AppData.bRRates2 = rateparms.rRates2;
++    shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs1, (void *)rateparms.cMsgs1, 6);
++    shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs2, (void *)rateparms.cMsgs2, 4);
++    shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs2, (void *)rateparms.rMsgs2, 4);
++    ptidsl->AppData.atucVendorId = (unsigned int)rateparms.atucVendorId;
++    ptidsl->AppData.lineLength = (unsigned int)dslhal_support_byteSwap16((unsigned short)rateparms.lineLength);
++    ptidsl->AppData.atucRevisionNum = (unsigned int)rateparms.atucGhsRevisionNum;         
++    ptidsl->AppData.usLineAttn = (ptidsl->AppData.bCMsgs2[3] >>2)&0x003f;
++    ptidsl->AppData.usMargin = (ptidsl->AppData.bCMsgs2[2])&0x001f;
++    
++    if((rateparms.cRates2 & 0x0f) == 0x01) 
++      optIdxU = 0;
++    else if((rateparms.cRates2 & 0x0f) == 0x02)  
++      optIdxU = 1;
++    else if((rateparms.cRates2 & 0x0f) == 0x04) 
++      optIdxU = 2;
++    else if((rateparms.cRates2 & 0x0f) == 0x08)  
++      optIdxU = 3;
++    else 
++      optIdxU = -1;
++    
++    dprintf(5, "optIdxU=%d\n", optIdxU);
++   
++    /* Obtain the US Rates using Opt# and CRates1 Table */
++    /* Rate(US) = [Bf(LS0) + Bi(LS0)]*32                */
++    if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
++      ptidsl->AppData.USConRate = ((rateparms.cRates1[optIdxU][CRATES1_BF_LS0] + rateparms.cRates1[optIdxU][CRATES1_BI_LS0]) * 32);
++    else
++      ptidsl->AppData.USConRate =  32 * dslhal_support_byteSwap16((unsigned short)rateparms.adsl2USRate);
++
++    ptidsl->AppData.USPeakCellRate = ptidsl->AppData.USConRate; 
++    
++    if(((rateparms.cRates2 >> 4) & 0x0f) == 0x01) 
++      optIdxD = 0;
++    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x02)  
++      optIdxD = 1;
++    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x04) 
++      optIdxD = 2;
++    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x08)  
++      optIdxD = 3;
++    else 
++      optIdxD = -1;
++    /* Obtain the DS Rates using Opt# and CRates1 Table */
++    /* Rate(DS) = [Bf(AS0) + Bi(AS0)]*32                */
++    if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
++      ptidsl->AppData.DSConRate =  (((rateparms.cRates1[optIdxD][CRATES1_BF_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BF_DSRS]&0x80)<<1))+ (rateparms.cRates1[optIdxD][CRATES1_BI_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BI_DSRS]&0x80)<<1)))* 32);
++    else
++      ptidsl->AppData.DSConRate = dslhal_support_byteSwap16((unsigned short)rateparms.adsl2DSRate);
++
++    dprintf(5, "ptidsl->AppData.wDSConRate=%d\n", ptidsl->AppData.DSConRate);
++    /* Determine which Path has Modem Trained with */
++    if((rateparms.cRates1[optIdxU][CRATES1_BF_LS0]) && (rateparms.cRates1[optIdxD][CRATES1_BF_AS0]))
++      ptidsl->AppData.TrainedPath = FAST_PATH;
++    else
++      ptidsl->AppData.TrainedPath = INTERLEAVED_PATH;
++
++    /* Set the mode in which the modem is trained */
++    ptidsl->AppData.TrainedMode = (unsigned int)rateparms.trainMode;
++    if(rateparms.trainMode == T1413_MODE)
++      ptidsl->AppData.TrainedMode = DSLTRAIN_T1413_MODE;
++    if(rateparms.trainMode == GDMT_MODE)
++      ptidsl->AppData.TrainedMode = DSLTRAIN_GDMT_MODE;
++
++    if(ptidsl->AppData.TrainedPath == FAST_PATH)
++       ptidsl->AppData.dsFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_DSRS]&0x1f);
++    else
++       ptidsl->AppData.dsIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_DSRS]&0x1f);
++    ptidsl->AppData.dsSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0x1f);
++    ptidsl->AppData.dsInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_DSI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0xc0)<<2));
++
++    if(ptidsl->AppData.TrainedPath == FAST_PATH)
++       ptidsl->AppData.usFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_USRS]&0x1f);
++    else
++       ptidsl->AppData.usIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_USRS]&0x1f);
++    ptidsl->AppData.usSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0x1f);
++    ptidsl->AppData.usInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_USI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0xc0)<<2));
++    }
++
++  dspOamSharedInterface.modemStats_p = (DEV_HOST_modemStatsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStats_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemStats_p,&StatisticsDef, sizeof(DEV_HOST_modemStatsDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++  /* Populate the Error Structure Variables */
++
++  /* US Interleave Path Error Statistics */
++
++  /* Change the endianness of the Pointer */
++  StatisticsDef.usErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsIntlv_p);
++
++  rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsIntlv_p,&usIntlvError, (sizeof(DEV_HOST_errorStats_t)));
++  
++  if (rc) 
++    return;
++
++  /* DS Interleave Path Error Statistics */
++
++  /* Change the endianness of the Pointer */
++  StatisticsDef.dsErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsIntlv_p);
++
++  rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsIntlv_p,&dsIntlvError, (sizeof(DEV_HOST_errorStats_t)));
++  
++  if (rc) 
++    return;
++
++  /* US Fast Path Error Statistics */
++
++  /* Change the endianness of the Pointer */
++  StatisticsDef.usErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsFast_p);
++
++  rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsFast_p,&usFastError, (sizeof(DEV_HOST_errorStats_t)));
++  
++  if (rc) 
++    return;
++
++  /* DS Fast Path Error Statistics */
++
++  /* Change the endianness of the Pointer */
++  StatisticsDef.dsErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsFast_p);
++
++  rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsFast_p,&dsFastError, (sizeof(DEV_HOST_errorStats_t)));
++  
++  if (rc) 
++    return;
++  if(!rc) 
++  {
++    if(ptidsl->AppData.bState > 2)
++    {
++      /* Get CRC Errors Stats for both US and DS */
++      ptidsl->AppData.dsICRC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.crcErrors);
++      ptidsl->AppData.dsFCRC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.crcErrors);
++      ptidsl->AppData.usICRC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.crcErrors);
++      ptidsl->AppData.usFCRC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.crcErrors);
++      /* Get FEC Errors Stats for both US and DS */
++      ptidsl->AppData.dsIFEC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.fecErrors);
++      ptidsl->AppData.dsFFEC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.fecErrors);
++      ptidsl->AppData.usIFEC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.fecErrors);
++      ptidsl->AppData.usFFEC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.fecErrors);
++      /* Get NCD Errors Stats for both US and DS */
++      ptidsl->AppData.dsINCD_error   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.ncdError);
++      ptidsl->AppData.dsFNCD_error   = dslhal_support_byteSwap32((unsigned int)dsFastError.ncdError);
++      ptidsl->AppData.usINCD_error   = dslhal_support_byteSwap32((unsigned int)usIntlvError.ncdError);
++      ptidsl->AppData.usFNCD_error   = dslhal_support_byteSwap32((unsigned int)usFastError.ncdError);
++      /* Get LCD Errors Stats for both US and DS */
++      ptidsl->AppData.dsILCD_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.lcdErrors);
++      ptidsl->AppData.dsFLCD_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.lcdErrors);
++      ptidsl->AppData.usILCD_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.lcdErrors);
++      ptidsl->AppData.usFLCD_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.lcdErrors);
++      /*Get HEC Errors Stats for both US and DS */
++      ptidsl->AppData.dsIHEC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.hecErrors);
++      ptidsl->AppData.dsFHEC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.hecErrors);
++      ptidsl->AppData.usIHEC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.hecErrors);
++      ptidsl->AppData.usFHEC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.hecErrors);
++
++      /* Get LOS and SEF error Stats */
++      ptidsl->AppData.LOS_errors      = dslhal_support_byteSwap32(StatisticsDef.losErrors);            
++      ptidsl->AppData.SEF_errors      = dslhal_support_byteSwap32(StatisticsDef.sefErrors);
++      ptidsl->AppData.coLosErrors = dslhal_support_byteSwap32(StatisticsDef.farEndLosErrors);
++      ptidsl->AppData.coRdiErrors = dslhal_support_byteSwap32(StatisticsDef.farEndRdiErrors);
++  
++  dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++
++  /* Populate the US/DS ATM Stats Variables */
++
++  /* US ATM Statistics */
++
++  /* Change the endianness of the Pointer */
++  atmStats.us0_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us0_p);
++
++  rc = dslhal_support_blockRead((PVOID)atmStats.us0_p,&usAtmStats0, (sizeof(DEV_HOST_usAtmStats_t)));
++  
++  if (rc) 
++    return;
++
++  atmStats.us1_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us1_p);
++
++  rc = dslhal_support_blockRead((PVOID)atmStats.us1_p,&usAtmStats1, (sizeof(DEV_HOST_usAtmStats_t)));
++  
++  if (rc) 
++    return;
++
++ /* DS ATM Statistics */
++
++  /* Change the endianness of the Pointer */
++  atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
++
++  rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
++  
++  if (rc) 
++    return;
++  atmStats.ds1_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds1_p);
++
++  rc = dslhal_support_blockRead((PVOID)atmStats.ds1_p,&dsAtmStats1, (sizeof(DEV_HOST_dsAtmStats_t)));
++  
++  if (rc) 
++    return;
++
++      /* Get ATM Stats for both US and DS for Channel 0*/
++      ptidsl->AppData.usAtm_count[0]     = dslhal_support_byteSwap32(usAtmStats0.goodCount);
++      ptidsl->AppData.usIdle_count[0]    = dslhal_support_byteSwap32(usAtmStats0.idleCount);
++#if SWTC
++      ptidsl->AppData.usPdu_count[0]     = dslhal_support_byteSwap32(usAtmStats0.pduCount);
++#endif
++      ptidsl->AppData.dsGood_count[0]    = dslhal_support_byteSwap32(dsAtmStats0.goodCount);
++      ptidsl->AppData.dsIdle_count[0]    = dslhal_support_byteSwap32(dsAtmStats0.idleCount);
++#if SWTC
++      ptidsl->AppData.dsPdu_count[0]     = dslhal_support_byteSwap32(dsAtmStats0.pduCount);
++#endif
++      ptidsl->AppData.dsBadHec_count[0]  = dslhal_support_byteSwap32((dsAtmStats0.badHecCount));
++      ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount));
++      /* Get ATM Stats for both US and DS for Channel 1*/
++      ptidsl->AppData.usAtm_count[1]     = dslhal_support_byteSwap32(usAtmStats1.goodCount);
++      ptidsl->AppData.usIdle_count[1]    = dslhal_support_byteSwap32(usAtmStats1.idleCount);
++#if SWTC
++      ptidsl->AppData.usPdu_count[1]     = dslhal_support_byteSwap32(usAtmStats1.pduCount);
++#endif
++      ptidsl->AppData.dsGood_count[1]    = dslhal_support_byteSwap32(dsAtmStats1.goodCount);
++      ptidsl->AppData.dsIdle_count[1]    = dslhal_support_byteSwap32(dsAtmStats1.idleCount);
++#if SWTC
++      ptidsl->AppData.dsPdu_count[1]     = dslhal_support_byteSwap32(dsAtmStats1.pduCount);
++#endif
++      ptidsl->AppData.dsBadHec_count[1]  = dslhal_support_byteSwap32((dsAtmStats1.badHecCount));
++      ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount));
++
++    /* Determine the US and DS Superframe Count */
++
++  dspOamSharedInterface.dspWriteSuperFrameCnt_p = (DEV_HOST_dspWrSuperFrameCntDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteSuperFrameCnt_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteSuperFrameCnt_p,&SuperFrameCnt, sizeof(DEV_HOST_dspWrSuperFrameCntDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++      ptidsl->AppData.usSuperFrmCnt   = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntUstrm);
++      ptidsl->AppData.dsSuperFrmCnt   = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntDstrm);
++      
++      /* Determine Frame Mode and Max Frame Mode */
++
++  dspOamSharedInterface.atucMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atucMsg_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atucMsg_p,&atuc_msg, sizeof(DEV_HOST_msg_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++
++  ptidsl->AppData.FrmMode         = (unsigned int)atuc_msg.framingMode;
++  ptidsl->AppData.MaxFrmMode      = (unsigned int)atuc_msg.maxFrameMode;
++
++  /* Determine Gross Gain */
++
++  dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++  ptidsl->AppData.grossGain = (unsigned int)aturMsg.grossGain;
++
++      /* Determine DS Line Attenuation & Margin */
++  dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,&eocVar, sizeof(DEV_HOST_eocVarDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++      ptidsl->AppData.dsLineAttn      = (unsigned int)eocVar.lineAtten;
++      ptidsl->AppData.dsMargin        = (unsigned int)eocVar.dsMargin;
++    }
++  } 
++
++  /* Read in the Shared Tables structure */      
++  dspOamSharedInterface.dspWrSharedTables_p = (DEV_HOST_dspWrSharedTables_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWrSharedTables_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWrSharedTables_p,&sharedTables, sizeof(DEV_HOST_dspWrSharedTables_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++
++  /* Read the ATU-R Bits and Gains Table */
++  sharedTables.aturBng_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.aturBng_p);
++  rc = dslhal_support_blockRead((PVOID)sharedTables.aturBng_p,ptidsl->AppData.rBng,255*2*sizeof(unsigned char));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++  /* Read the ATU-C Bits and Gains Table */
++  sharedTables.atucBng_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.atucBng_p);
++  if(ptidsl->netService == 2) /* for Annex_B */
++    {
++      rc = dslhal_support_blockRead((PVOID)sharedTables.atucBng_p,ptidsl->AppData.cBng,126*sizeof(unsigned char));
++      if (rc)
++       {
++        dprintf(1,"dslhal_support_blockRead failed\n");
++        return;
++        }
++      for(i=0;i<US_BNG_LENGTH*2;i++)
++         usBits[i]=0;
++      for(i=1;i<US_BNG_LENGTH*2;i++)
++       {
++        usBits[i]=((ptidsl->AppData.cBng[(i-1)*2])&0xf);
++        dprintf(5,"Bit #%d : 0x%x\n",i,usBits[i]);
++        }
++      for(i=1;i<US_BNG_LENGTH*2;i++)
++       {
++        if(usBits[i])
++        usNumLoadedTones++;
++        }
++    }
++  else
++    {
++      rc = dslhal_support_blockRead((PVOID)sharedTables.atucBng_p,ptidsl->AppData.cBng,62*sizeof(unsigned char));
++      if (rc)
++       {
++        dprintf(1,"dslhal_support_blockRead failed\n");
++        return;
++        }
++      for(i=0;i<US_BNG_LENGTH;i++)
++         usBits[i]=0;
++      for(i=1;i<US_BNG_LENGTH;i++)
++       {
++        usBits[i]=((ptidsl->AppData.cBng[(i-1)*2])&0xf);
++        dprintf(5,"Bit #%d : 0x%x\n",i,usBits[i]);
++        }
++      for(i=1;i<US_BNG_LENGTH;i++)
++       {
++        if(usBits[i])
++        usNumLoadedTones++;
++        }
++    }
++
++  /* Determine Number U/S of Loaded Tones */
++
++  /* U/S Power Computation */
++  dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
++                                &phyPerf, sizeof(DEV_HOST_phyPerf_t));
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return;
++    }  
++  ptidsl->AppData.currentHybridNum = phyPerf.currentHybridNumUsed;
++  phyPerf.usAvgGain = dslhal_support_byteSwap32(phyPerf.usAvgGain);
++  ptidsl->AppData.usTxPower = LOG43125 + phyPerf.usAvgGain + (256*US_NOMINAL_POWER)+log10[usNumLoadedTones-1];
++  dprintf(7,"Avg Gain: 0x%x  usNumLoadedTones: 0x%x    log: 0x%x\n",phyPerf.usAvgGain, usNumLoadedTones, log10[usNumLoadedTones-1]);
++  
++  /* Determine Number D/S of Loaded Tones */
++  dsBits[0]=0;
++  for(i=0;i<DS_BNG_LENGTH;i++)
++    {
++     dsBits[i]=0;
++     /* ptidsl->AppData.rBng[i-1]=dslhal_support_byteSwap32((unsigned int)ptidsl->AppData.rBng[i-1]);*/
++    }
++  for(i=1;i<DS_BNG_LENGTH;i++)
++    {
++     dsBits[i]=((ptidsl->AppData.rBng[(i-1)*2])&0xf);
++     dprintf(5,"Bit #%d : 0x%x\n",i,dsBits[i]);
++    }
++  for(i=1;i<DS_BNG_LENGTH;i++)
++    {
++     if(dsBits[i])
++       dsNumLoadedTones++;
++    }
++  /* D/S Power Computation */
++  dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
++                                &phyPerf, sizeof(DEV_HOST_phyPerf_t));
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return;
++    }  
++  /* D/S Power Cutback */
++  dsPowerCutBack = (unsigned char)((((ptidsl->AppData.bCMsgs1[0]) >>6) &0x3)+(((ptidsl->AppData.bCMsgs1[1]) &0x1) <<2));
++  phyPerf.dsAvgGain = dslhal_support_byteSwap32(phyPerf.dsAvgGain);
++  ptidsl->AppData.dsTxPower = LOG43125 + phyPerf.dsAvgGain + (256*((2*(dsPowerCutBack-1))-52)) + log10[dsNumLoadedTones-1];
++  dprintf(7,"Avg Gain: %d  dsNumLoadedTones: %d  log: %d  pcb: %d \n",phyPerf.dsAvgGain, dsNumLoadedTones, log10[dsNumLoadedTones-1], dsPowerCutBack);
++  /* ds bit allocation */
++  sharedTables.bitAllocTblDstrm_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.bitAllocTblDstrm_p);
++  rc = dslhal_support_blockRead((PVOID)sharedTables.bitAllocTblDstrm_p,ptidsl->AppData.BitAllocTblDstrm, 256*sizeof(unsigned char));
++  if(rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed \n");
++      return;
++    }
++
++    /* us bit allocation */
++  sharedTables.bitAllocTblUstrm_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.bitAllocTblUstrm_p);
++  rc = dslhal_support_blockRead((PVOID)sharedTables.bitAllocTblUstrm_p,ptidsl->AppData.BitAllocTblUstrm, 32*sizeof(unsigned char));
++  if(rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed \n");
++      return;
++    }
++    /* margin per tone */
++  sharedTables.marginTblDstrm_p = (signed char *)dslhal_support_byteSwap32((unsigned int)sharedTables.marginTblDstrm_p);
++  rc = dslhal_support_blockRead((PVOID)sharedTables.marginTblDstrm_p,ptidsl->AppData.marginTblDstrm, 256*sizeof(signed char));
++  if(rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed \n");
++      return;
++    }
++  /* Read Configured Options */
++  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p, 
++                               &configParms, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++  else 
++    {
++      /* r-Msg1 */
++    ptidsl->AppData.StdMode = (unsigned int)configParms.stdMode;
++    if(configParms.stdMode == T1413_MODE)
++      ptidsl->AppData.StdMode = DSLTRAIN_T1413_MODE;
++    if(configParms.stdMode == GDMT_MODE)
++      ptidsl->AppData.StdMode = DSLTRAIN_GDMT_MODE; 
++    if(configParms.stdMode == MULTI_MODE)
++      ptidsl->AppData.StdMode = DSLTRAIN_MULTI_MODE; 
++
++    shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs1, (void *)configParms.rMsgs1, 6*sizeof(char));
++    if((ptidsl->AppData.bRMsgs1[2] & 0x02) == 0x02) 
++      { 
++      dprintf(7,"Trellis!\n");
++      ptidsl->configFlag |= CONFIG_FLAG_TRELLIS;
++      }
++    else
++      ptidsl->configFlag &= ~CONFIG_FLAG_TRELLIS;  
++    if(ptidsl->AppData.bRMsgs1[2]&0x01)
++      ptidsl->configFlag |= CONFIG_FLAG_EC;
++    else
++      ptidsl->configFlag &= ~CONFIG_FLAG_EC;      
++    }
++    return;
++}
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_initStatistics()
++*
++*********************************************************************************************
++* DESCRIPTION: init statistical information of ax5 modem daugter card. 
++*
++* Input: tidsl_t *ptidsl
++* 
++* Return: NULL
++*         
++********************************************************************************************/
++void dslhal_api_initStatistics(tidsl_t * ptidsl)
++{
++  int rc;
++  /*TCHostCommDef TCHostCommParms; */
++  int optIdxU, optIdxD;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  DEV_HOST_dspWrNegoParaDef_t   rateparms;
++  DEV_HOST_modemStatsDef_t      StatisticsDef;
++  DEV_HOST_errorStats_t usIntlvError, usFastError, dsIntlvError, dsFastError;
++  DEV_HOST_atmStats_t           atmStats;
++  DEV_HOST_usAtmStats_t         usAtmStats0, usAtmStats1;
++  DEV_HOST_dsAtmStats_t         dsAtmStats0,dsAtmStats1;
++  DEV_HOST_dspWrSuperFrameCntDef_t   SuperFrameCnt;
++  DEV_HOST_msg_t                atuc_msg, aturMsg;
++  DEV_HOST_eocVarDef_t          eocVar;
++  
++  dprintf(5, "dslhal_api_initStatistics\n");
++  
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++  dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p,&rateparms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++  if(!rc) 
++    {
++      /*    shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)rateparms.cRates1, SIZE_OF_CRATES1_TABLE); */
++    ptidsl->AppData.bCRates2 = rateparms.cRates2;
++    /*    shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)rateparms.rRates1, 44); */
++    ptidsl->AppData.bRRates2 = rateparms.rRates2;
++    shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs1, (void *)rateparms.cMsgs1, 6);
++    shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs2, (void *)rateparms.cMsgs2, 4);
++    shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs2, (void *)rateparms.rMsgs2, 4); 
++    
++    ptidsl->AppData.atucVendorId = dslhal_support_byteSwap32((unsigned int)rateparms.atucVendorId);
++    ptidsl->AppData.lineLength = (unsigned int)dslhal_support_byteSwap16((unsigned short)rateparms.lineLength);
++    ptidsl->AppData.atucRevisionNum = rateparms.atucGhsRevisionNum;
++    ptidsl->AppData.usLineAttn = (ptidsl->AppData.bCMsgs2[3] >>2)&0x003f;
++    ptidsl->AppData.usMargin = (ptidsl->AppData.bCMsgs2[2])&0x001f;
++    
++    /* Get the UpStream Connection Rate */
++    /* Based on the Bit Pattern Get the Opt# */
++    if((rateparms.cRates2 & 0x0f) == 0x01) 
++      optIdxU = 0;
++    else if((rateparms.cRates2 & 0x0f) == 0x02)  
++      optIdxU = 1;
++    else if((rateparms.cRates2 & 0x0f) == 0x04) 
++      optIdxU = 2;
++    else if((rateparms.cRates2 & 0x0f) == 0x08)  
++      optIdxU = 3;
++    else 
++      optIdxU = -1;
++    dprintf(5, "optIdxU=%d\n", optIdxU);
++    /* Obtain the US Rates using Opt# and CRates1 Table */
++    /* Rate(US) = [Bf(LS0) + Bi(LS0)]*32                */
++    if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
++      ptidsl->AppData.USConRate = ((rateparms.cRates1[optIdxU][CRATES1_BF_LS0] + rateparms.cRates1[optIdxU][CRATES1_BI_LS0]) * 32);
++    else
++      ptidsl->AppData.USConRate =  dslhal_support_byteSwap16((unsigned short)rateparms.adsl2USRate);
++    ptidsl->AppData.USPeakCellRate = ptidsl->AppData.USConRate; 
++    
++    /* Get the DownStream Connection Rate */
++    /* Based on the Bit Pattern Get the Opt# */
++    if(((rateparms.cRates2 >> 4) & 0x0f) == 0x01) 
++      optIdxD = 0;
++    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x02)  
++      optIdxD = 1;
++    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x04) 
++      optIdxD = 2;
++    else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x08)  
++      optIdxD = 3;
++    else 
++      optIdxD = -1;
++    /* Obtain the DS Rates using Opt# and CRates1 Table */
++    /* Rate(DS) = [Bf(AS0) + Bi(AS0)]*32                */
++    if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
++      ptidsl->AppData.DSConRate =  (((rateparms.cRates1[optIdxD][CRATES1_BF_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BF_DSRS]&0x80)<<1))+ (rateparms.cRates1[optIdxD][CRATES1_BI_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BI_DSRS]&0x80)<<1)))* 32);
++    else
++      ptidsl->AppData.DSConRate =  dslhal_support_byteSwap16((unsigned short)rateparms.adsl2DSRate);
++    dprintf(5, "ptidsl->AppData.wDSConRate=%d\n", ptidsl->AppData.DSConRate);
++    /* Determine which Path has Modem Trained with */
++    if((rateparms.cRates1[optIdxU][CRATES1_BF_LS0]) && (rateparms.cRates1[optIdxD][CRATES1_BF_AS0]))
++      ptidsl->AppData.TrainedPath = FAST_PATH;
++    else
++      ptidsl->AppData.TrainedPath = INTERLEAVED_PATH;
++
++    /* Set the mode in which the modem is trained */
++    ptidsl->AppData.TrainedMode = (unsigned int)rateparms.trainMode;
++    if(rateparms.trainMode == T1413_MODE)
++      ptidsl->AppData.TrainedMode = DSLTRAIN_T1413_MODE;
++    if(rateparms.trainMode == GDMT_MODE)
++      ptidsl->AppData.TrainedMode = DSLTRAIN_GDMT_MODE;
++
++    if(ptidsl->AppData.TrainedPath == FAST_PATH)
++       ptidsl->AppData.dsFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_DSRS]&0x1f);
++    else
++       ptidsl->AppData.dsIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_DSRS]&0x1f);
++    ptidsl->AppData.dsSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0x1f);
++    ptidsl->AppData.dsInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_DSI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0xc0)<<2));
++
++    if(ptidsl->AppData.TrainedPath == FAST_PATH)
++       ptidsl->AppData.usFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_USRS]&0x1f);
++    else
++       ptidsl->AppData.usIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_USRS]&0x1f);
++    ptidsl->AppData.usSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0x1f);
++    ptidsl->AppData.usInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_USI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0xc0)<<2));
++    }
++  
++  /* get the Statistics itself */
++
++  dspOamSharedInterface.modemStats_p = (DEV_HOST_modemStatsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStats_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemStats_p,&StatisticsDef, sizeof(DEV_HOST_modemStatsDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return;
++    }
++
++  /* Populate the Error Structure Variables */
++
++  /* US Interleave Path Error Statistics */
++
++  /* Change the endianness of the Pointer */
++  StatisticsDef.usErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsIntlv_p);
++
++  rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsIntlv_p,&usIntlvError, (sizeof(DEV_HOST_errorStats_t)));
++  
++  if (rc) 
++    return;
++
++  /* DS Interleave Path Error Statistics */
++
++  /* Change the endianness of the Pointer */
++  StatisticsDef.dsErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsIntlv_p);
++
++  rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsIntlv_p,&dsIntlvError, (sizeof(DEV_HOST_errorStats_t)));
++  
++  if (rc) 
++    return;
++
++  /* US Fast Path Error Statistics */
++
++  /* Change the endianness of the Pointer */
++  StatisticsDef.usErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsFast_p);
++
++  rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsFast_p,&usFastError, (sizeof(DEV_HOST_errorStats_t)));
++  
++  if (rc) 
++    return;
++
++
++  /* DS Fast Path Error Statistics */
++
++  /* Change the endianness of the Pointer */
++  StatisticsDef.dsErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsFast_p);
++
++  rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsFast_p,&dsFastError, (sizeof(DEV_HOST_errorStats_t)));
++  
++  if (rc) 
++    return;
++
++  if(ptidsl->AppData.bState > 2)
++  {
++    /* Get CRC Errors Stats for both US and DS */
++    ptidsl->AppData.dsICRC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.crcErrors);
++    ptidsl->AppData.dsFCRC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.crcErrors);
++    ptidsl->AppData.usICRC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.crcErrors);
++    ptidsl->AppData.usFCRC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.crcErrors);
++    /* Get FEC Errors Stats for both US and DS */
++    ptidsl->AppData.dsIFEC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.fecErrors);
++    ptidsl->AppData.dsFFEC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.fecErrors);
++    ptidsl->AppData.usIFEC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.fecErrors);
++    ptidsl->AppData.usFFEC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.fecErrors);
++    /* Get NCD Errors Stats for both US and DS */
++    ptidsl->AppData.dsINCD_error   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.ncdError);
++    ptidsl->AppData.dsFNCD_error   = dslhal_support_byteSwap32((unsigned int)dsFastError.ncdError);
++    ptidsl->AppData.usINCD_error   = dslhal_support_byteSwap32((unsigned int)usIntlvError.ncdError);
++    ptidsl->AppData.usFNCD_error   = dslhal_support_byteSwap32((unsigned int)usFastError.ncdError);
++    /* Get LCD Errors Stats for both US and DS */
++    ptidsl->AppData.dsILCD_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.lcdErrors);
++    ptidsl->AppData.dsFLCD_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.lcdErrors);
++    ptidsl->AppData.usILCD_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.lcdErrors);
++    ptidsl->AppData.usFLCD_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.lcdErrors);
++    /*Get HEC Errors Stats for both US and DS */
++    ptidsl->AppData.dsIHEC_errors   = dslhal_support_byteSwap32((unsigned int)dsIntlvError.hecErrors);
++    ptidsl->AppData.dsFHEC_errors   = dslhal_support_byteSwap32((unsigned int)dsFastError.hecErrors);
++    ptidsl->AppData.usIHEC_errors   = dslhal_support_byteSwap32((unsigned int)usIntlvError.hecErrors);
++    ptidsl->AppData.usFHEC_errors   = dslhal_support_byteSwap32((unsigned int)usFastError.hecErrors);
++    
++    /* Get LOS and SEF error Stats */
++    ptidsl->AppData.LOS_errors      = dslhal_support_byteSwap32(StatisticsDef.losErrors);              
++    ptidsl->AppData.SEF_errors      = dslhal_support_byteSwap32(StatisticsDef.sefErrors);
++    ptidsl->AppData.coLosErrors = dslhal_support_byteSwap32(StatisticsDef.farEndLosErrors);
++    ptidsl->AppData.coRdiErrors = dslhal_support_byteSwap32(StatisticsDef.farEndRdiErrors);    
++    
++    dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
++    
++    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
++    
++    if (rc)
++      {
++        dprintf(1,"dslhal_support_blockRead failed\n");
++        return;
++      }
++
++    /* Populate the US/DS ATM Stats Variables */
++    
++    /* US ATM Statistics */
++
++    /* Change the endianness of the Pointer */
++    atmStats.us0_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us0_p);
++    
++    rc = dslhal_support_blockRead((PVOID)atmStats.us0_p,&usAtmStats0, (sizeof(DEV_HOST_usAtmStats_t)));
++                                       
++    if (rc) 
++     return;
++
++    /* Change the endianness of the Pointer */
++    atmStats.us1_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us1_p);
++    
++    rc = dslhal_support_blockRead((PVOID)atmStats.us1_p,&usAtmStats1, (sizeof(DEV_HOST_usAtmStats_t)));
++                                       
++    if (rc) 
++     return;
++
++
++  /* DS ATM Statistics */
++                                       
++  /* Change the endianness of the Pointer */
++    atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
++    
++    rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
++                                       
++    if (rc) 
++    return;
++
++  /* Change the endianness of the Pointer */
++    atmStats.ds1_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds1_p);
++    
++    rc = dslhal_support_blockRead((PVOID)atmStats.ds1_p,&dsAtmStats1, (sizeof(DEV_HOST_dsAtmStats_t)));
++                                       
++    if (rc) 
++    return;
++    /* Get ATM Stats for both US and DS Channel 0*/
++    ptidsl->AppData.usAtm_count[0]     = dslhal_support_byteSwap32(usAtmStats0.goodCount);
++    ptidsl->AppData.usIdle_count[0]    = dslhal_support_byteSwap32(usAtmStats0.idleCount);
++#if SWTC
++    ptidsl->AppData.usPdu_count[0]     = dslhal_support_byteSwap32(usAtmStats0.pduCount);
++#endif
++    ptidsl->AppData.dsGood_count[0]    = dslhal_support_byteSwap32(dsAtmStats0.goodCount);
++    ptidsl->AppData.dsIdle_count[0]    = dslhal_support_byteSwap32(dsAtmStats0.idleCount);
++#if SWTC
++    ptidsl->AppData.dsPdu_count[0]     = dslhal_support_byteSwap32(dsAtmStats0.pduCount);
++#endif
++    ptidsl->AppData.dsBadHec_count[0]  = dslhal_support_byteSwap32((dsAtmStats0.badHecCount));
++    ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount));
++
++    /* Get ATM Stats for both US and DS Channel 1*/
++    ptidsl->AppData.usAtm_count[1]     = dslhal_support_byteSwap32(usAtmStats1.goodCount);
++    ptidsl->AppData.usIdle_count[1]    = dslhal_support_byteSwap32(usAtmStats1.idleCount);
++#if SWTC
++    ptidsl->AppData.usPdu_count[1]     = dslhal_support_byteSwap32(usAtmStats1.pduCount);
++#endif
++    ptidsl->AppData.dsGood_count[1]    = dslhal_support_byteSwap32(dsAtmStats1.goodCount);
++    ptidsl->AppData.dsIdle_count[1]    = dslhal_support_byteSwap32(dsAtmStats1.idleCount);
++#if SWTC
++    ptidsl->AppData.dsPdu_count[1]     = dslhal_support_byteSwap32(dsAtmStats1.pduCount);
++#endif
++    ptidsl->AppData.dsBadHec_count[1]  = dslhal_support_byteSwap32((dsAtmStats1.badHecCount));
++    ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount));
++
++    
++    /* Determine the US and DS Superframe Count */
++
++    dspOamSharedInterface.dspWriteSuperFrameCnt_p = (DEV_HOST_dspWrSuperFrameCntDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteSuperFrameCnt_p);
++    
++    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteSuperFrameCnt_p,&SuperFrameCnt, sizeof(DEV_HOST_dspWrSuperFrameCntDef_t));
++    
++    if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return;
++    }
++
++    ptidsl->AppData.usSuperFrmCnt   = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntUstrm);
++    ptidsl->AppData.dsSuperFrmCnt   = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntDstrm);
++    
++    /* Determine Frame Mode and Max Frame Mode */
++    
++    dspOamSharedInterface.atucMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atucMsg_p);
++    
++    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atucMsg_p,&atuc_msg, sizeof(DEV_HOST_msg_t));
++  
++    if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return;
++    }
++
++    ptidsl->AppData.FrmMode         = (unsigned int)atuc_msg.framingMode;
++    ptidsl->AppData.MaxFrmMode      = (unsigned int)atuc_msg.maxFrameMode;
++    
++    /* Determine Gross Gain */
++
++    dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
++
++    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
++  
++    if (rc)
++      {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return;
++      }
++    ptidsl->AppData.grossGain = (unsigned int)aturMsg.grossGain;
++    /* Determine DS Line Attenuation & Margin */
++    dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
++    
++    rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,&eocVar, sizeof(DEV_HOST_eocVarDef_t));
++    
++    if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return;
++    }
++
++    ptidsl->AppData.dsLineAttn      = (unsigned int)eocVar.lineAtten;
++    ptidsl->AppData.dsMargin        = (unsigned int)eocVar.dsMargin;
++    }
++    
++#if __HOST_FORINTERNALUSEONLY_R_H__
++  ptidsl->AppData.BER =  dslhal_INTERNAL_computeAtmBitErrorRate(ptidsl);
++#endif
++    dprintf(5, "initstatistics done\n");
++    return;
++  }
++
++/****************************************************************************************** 
++ * FUNCTION NAME:    dslhal_api_disableLosAlarm(tidsl_t *ptidsl,unsigned int set) 
++ * 
++ ******************************************************************************************* 
++ * DESCRIPTION: This fuction enables/disables all the LOS alarms 
++ * 
++ * INPUT:  PITIDSLHW_T *ptidsl 
++ *         unsigned int set; //if set is TRUE: LOS Alarms are disabled else enabled
++ * RETURN: 0 SUCCESS 
++ *         1 FAILED 
++ * NOTES:  Currently not supported in any version other than MR4 Patch release..  
++ *****************************************************************************************/ 
++unsigned int dslhal_api_disableLosAlarm(tidsl_t *ptidsl,unsigned int set) 
++{ 
++   DEV_HOST_oamWrNegoParaDef_t NegoPara;
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;
++   dprintf(5," dslhal_api_setTrainingMode()\n");
++   if(!ptidsl)
++    {
++      dprintf(3, "Error: PTIDSL pointer invalid\n");
++      return DSLHAL_ERROR_INVALID_PARAM;
++    }
++
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
++
++   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  if(set) 
++    {
++   NegoPara.disableLosAlarm = TRUE;
++   /*  NegoPara.marginMonitorTrning = TRUE;
++       NegoPara.marginMonitorShwtme = TRUE;*/
++    } 
++  else
++    {
++    NegoPara.disableLosAlarm = FALSE;
++    /*  NegoPara.marginMonitorTrning = FALSE;
++        NegoPara.marginMonitorShwtme = FALSE;*/
++    }
++
++  rc = dslhal_support_blockWrite(&NegoPara,(PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++  dprintf(5," dslhal_api_disableLosAlarm() Done\n"); 
++  return DSLHAL_ERROR_NO_ERRORS; 
++} 
++
++/******************************************************************************************  
++ * FUNCTION NAME:    dslhal_api_setMarginThreshold(tidsl_t *ptidsl,int threshold)  
++ *  
++ *******************************************************************************************  
++ * DESCRIPTION: This fuction does sets the Margin threshold 
++ *  
++ * INPUT:  PITIDSLHW_T *ptidsl  
++ *         int threshold 
++ *        
++ *                                  
++ * RETURN: 0 SUCCESS  
++ *         1 FAILED  
++ *  
++ *****************************************************************************************/  
++unsigned int dslhal_api_setMarginThreshold(tidsl_t *ptidsl, int threshold)  
++{  
++   DEV_HOST_oamWrNegoParaDef_t NegoPara;  
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;  
++   
++   dprintf(5," dslhal_ctrl_setThreshold()\n");  
++    
++   if(!ptidsl)  
++     {  
++      dprintf(3, "Error: PTIDSL pointer invalid\n");  
++      return DSLHAL_ERROR_INVALID_PARAM;  
++     }  
++  
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++
++  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
++
++
++   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  NegoPara.marginThreshold = threshold;
++  
++  rc = dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++
++  if(rc)
++    return DSLHAL_ERROR_MARGIN_API_FAILURE;
++
++  dprintf(5," dslhal_api_setThreshold() Done\n");  
++  return DSLHAL_ERROR_NO_ERRORS;  
++}  
++
++
++/****************************************************************************************** 
++ * FUNCTION NAME:    dslhal_api_setMonitorFlags(tidsl_t *ptidsl, unsigned int trainflag,unsigned int shwtflag) 
++ * 
++ ******************************************************************************************* 
++ * DESCRIPTION: This fuction does sets the Margin monitoring flag
++ * 
++ * INPUT:  PITIDSLHW_T *ptidsl 
++ *         unsigned int trainflag
++ *         unsigned int shwtflag 
++ *                                 
++ * RETURN: 0 SUCCESS 
++ *         1 FAILED 
++ * 
++ *****************************************************************************************/ 
++unsigned int dslhal_api_setMarginMonitorFlags(tidsl_t *ptidsl,unsigned int trainflag,unsigned int shwtflag) 
++{ 
++   DEV_HOST_oamWrNegoParaDef_t NegoPara; 
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc; 
++  
++   dprintf(5," dslhal_ctrl_setMonitorFlags()\n"); 
++   
++   if(!ptidsl) 
++     { 
++      dprintf(3, "Error: PTIDSL pointer invalid\n"); 
++      return DSLHAL_ERROR_INVALID_PARAM; 
++     } 
++
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++
++  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
++
++
++   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  if (trainflag) 
++    { 
++        NegoPara.marginMonitorTrning = TRUE; 
++    } 
++  else 
++    { 
++        NegoPara.marginMonitorTrning = FALSE; 
++    } 
++  if (shwtflag) 
++    { 
++        NegoPara.marginMonitorShwtme = TRUE; 
++    } 
++  else 
++    { 
++        NegoPara.marginMonitorShwtme = FALSE; 
++    } 
++ 
++  rc = dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++    if(rc)
++      return DSLHAL_ERROR_MARGIN_API_FAILURE;
++  dprintf(5," dslhal_api_setMonitorFlags() Done\n"); 
++  return DSLHAL_ERROR_NO_ERRORS; 
++} 
++
++/******************************************************************************************  
++ * FUNCTION NAME:    dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNum)  
++ *  
++ *******************************************************************************************  
++ * DESCRIPTION: This fuction Sets the eoc Serial Number  
++ *  
++ * INPUT:  PITIDSLHW_T *ptidsl  
++ *         char *SerialNum : Input eoc Serial Number
++ *  
++ * RETURN: 0 SUCCESS  
++ *         1 FAILED  
++ *  
++ *****************************************************************************************/  
++unsigned int dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNumber)  
++{  
++   DEV_HOST_eocVarDef_t eocVar;
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;  
++   dprintf(5," dslhal_api_setEocSerialNumber()\n");  
++ 
++   if(!ptidsl) 
++     { 
++      dprintf(3, "Error: PTIDSL pointer invalid\n"); 
++      return DSLHAL_ERROR_INVALID_PARAM; 
++     } 
++
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++
++  dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p, 
++                               &eocVar, sizeof(DEV_HOST_eocVarDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++   
++  shim_osMoveMemory(eocVar.serialNumber,SerialNumber,32); 
++
++  rc= dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); 
++    if(rc)
++      return DSLHAL_ERROR_EOCREG_API_FAILURE;
++  dprintf(5," dslhal_api_setEocSerialNumber() Done\n");  
++   
++  return DSLHAL_ERROR_NO_ERRORS;
++  
++}  
++
++
++/****************************************************************************************** 
++ * FUNCTION NAME:    dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID) 
++ * 
++ ******************************************************************************************* 
++ * DESCRIPTION: This fuction Sets the eoc Vendor ID 
++ * 
++ * INPUT:  PITIDSLHW_T *ptidsl 
++ *         char *VendorID : Input eoc Vendor ID
++ * 
++ * RETURN: 0 SUCCESS 
++ *         1 FAILED 
++ * 
++ *****************************************************************************************/ 
++unsigned int dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID) 
++{ 
++  DEV_HOST_oamWrNegoParaDef_t NegoPara;  
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  int rc; 
++  dprintf(5," dslhal_api_setEocVendorId()\n"); 
++
++  if(!ptidsl) 
++    { 
++      dprintf(3, "Error: PTIDSL pointer invalid\n"); 
++      return DSLHAL_ERROR_INVALID_PARAM; 
++    }   
++  
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++  
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
++
++
++   rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++  shim_osMoveMemory(NegoPara.gdmtVendorId,VendorID,8);
++  rc= dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++    if(rc)
++      return DSLHAL_ERROR_EOCREG_API_FAILURE;
++  
++  dprintf(5," dslhal_api_setEocVendorId() Done\n"); 
++  return DSLHAL_ERROR_NO_ERRORS; 
++} 
++
++/******************************************************************************************   
++ * FUNCTION NAME:    dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNum)   
++ *   
++ *******************************************************************************************   
++ * DESCRIPTION: This fuction Sets the eoc Revision Number   
++ *   
++ * INPUT:  PITIDSLHW_T *ptidsl   
++ *         char *RevNum : Input eoc Revision Number 
++ *   
++ * RETURN: 0 SUCCESS   
++ *         1 FAILED   
++ *   
++ *****************************************************************************************/   
++unsigned int dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNumber)   
++{   
++
++   DEV_HOST_eocVarDef_t eocVar;
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;  
++   /*add for UR2 test */
++   UINT8        selfTestResults[2];
++   memset(selfTestResults,0x00,sizeof(selfTestResults));
++   /* add for UR2 test */
++   dprintf(5," dslhal_api_setEocRevisionNumber()\n");   
++   
++  if(!ptidsl)  
++     {  
++      dprintf(3, "Error: PTIDSL pointer invalid\n");  
++      return DSLHAL_ERROR_INVALID_PARAM;  
++     }  
++
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++     dprintf(1,"dslhal_support_blockRead failed\n");
++     return DSLHAL_ERROR_BLOCK_READ;
++     }
++
++  dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p, 
++                               &eocVar, sizeof(DEV_HOST_eocVarDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  shim_osMoveMemory(eocVar.revNumber,RevNumber,4);
++  /* add for UR2 test */
++  shim_osMoveMemory(eocVar.dummy,selfTestResults,2);
++  /* add for UR2 test */
++  rc=dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); 
++    if(rc)
++      return DSLHAL_ERROR_EOCREG_API_FAILURE;
++  dprintf(5," dslhal_api_setEocRevisionNumber Done\n");   
++  return DSLHAL_ERROR_NO_ERRORS;   
++}   
++
++/******************************************************************************************      
++ * FUNCTION NAME:    dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)      
++ *      
++ *******************************************************************************************      
++ * DESCRIPTION: This fuction Sets the eoc ATUR Config Register  
++ *      
++ * INPUT:  PITIDSLHW_T *ptidsl      
++ *         char *ATURConfig : Input eoc ATUR Config Register    
++ *      
++ * RETURN: 0 SUCCESS      
++ *         1 FAILED      
++ *      
++ *****************************************************************************************/      
++unsigned int dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)
++{    
++
++  DEV_HOST_eocVarDef_t eocVar;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  int rc;  
++  dprintf(5," dslhal_api_setAturConfig()\n");    
++
++  if(!ptidsl)  
++     {  
++      dprintf(3, "Error: PTIDSL pointer invalid\n");  
++      return DSLHAL_ERROR_INVALID_PARAM;  
++     }  
++
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++  
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++  dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
++  
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,
++                                     &eocVar, sizeof(DEV_HOST_eocVarDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }  
++     shim_osMoveMemory(eocVar.aturConfig,ATURConfig,30);
++   rc= dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); 
++    if(rc)
++      return DSLHAL_ERROR_EOCREG_API_FAILURE;
++  dprintf(5," dslhal_api_setAturConfig() Done\n");    
++  return DSLHAL_ERROR_NO_ERRORS;   
++}
++
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl,unsigned int flag)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Rate Adapt Enable Flag
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int flag; //if flag = TRUE set rateadapt flag else reset it
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl,unsigned int flag)
++{
++   DEV_HOST_msg_t aturMsg;
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;
++   dprintf(5," dslhal_api_setRateAdaptFlag()\n");
++   
++  if(!ptidsl)  
++     {  
++      dprintf(3, "Error: PTIDSL pointer invalid\n");  
++      return DSLHAL_ERROR_INVALID_PARAM;  
++     }  
++
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
++                                      &aturMsg, sizeof(DEV_HOST_msg_t));
++   if (rc)
++     {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   if(flag)
++     aturMsg.rateAdapt = TRUE;
++   else
++     aturMsg.rateAdapt = FALSE;
++   
++   rc= dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); 
++   if(rc)
++     return DSLHAL_ERROR_CONFIG_API_FAILURE;
++   dprintf(5," dslhal_api_setRateAdaptFlag() Done\n");
++   return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setTrellisFlag(tidsl_t *ptidsl,unsigned int flag)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Trellis Coding Enable Flag
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int flag;  // if flag = TRUE, set trellis flag else reset
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setTrellisFlag(tidsl_t *ptidsl,unsigned int flag)
++{
++
++   DEV_HOST_msg_t aturMsg;
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   DEV_HOST_oamWrNegoParaDef_t negoPara;
++   int rc;
++   dprintf(5," dslhal_api_setTrellisFlag()\n");   
++   if(!ptidsl)
++     {
++       dprintf(3, "Error: PTIDSL pointer invalid\n");
++       return DSLHAL_ERROR_INVALID_PARAM;
++     }
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
++   rc += dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
++   dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
++   rc += dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&negoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++
++  if(flag)
++    {
++      aturMsg.trellis = TRUE;
++      negoPara.rMsgs1[2] |= 0x02;
++    }
++  else
++    {
++      aturMsg.trellis = FALSE;
++      negoPara.rMsgs1[2] &= 0xFD;
++    }   
++  rc=0;
++  rc+=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); 
++  rc+= dslhal_support_blockWrite(&negoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if(rc)
++     return DSLHAL_ERROR_CONFIG_API_FAILURE;
++
++  dprintf(5," dslhal_api_setTrellisFlag() Done\n");
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Maximum bits per carrier value
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int maxbits : should be a value between 0-15
++*
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
++{
++
++   DEV_HOST_msg_t aturMsg;
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;
++
++   dprintf(5," dslhal_api_setMaxBitsPerCarrier()\n");
++   if(maxbits>15)
++     {
++       dprintf(3,"Maximum Number of Bits per carrier cannot exceed 15!\n");
++       return DSLHAL_ERROR_INVALID_PARAM;
++     }
++
++   if(!ptidsl)
++    {
++      dprintf(3, "Error: PTIDSL pointer invalid\n");
++       return DSLHAL_ERROR_INVALID_PARAM;
++    }
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
++                                      &aturMsg, sizeof(DEV_HOST_msg_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++
++  aturMsg.maxBits = maxbits;
++   
++   rc=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); 
++   if(rc)
++     return DSLHAL_ERROR_CONFIG_API_FAILURE;
++   dprintf(5," dslhal_api_setMaxBitsPerCarrier() Done\n");
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Maximum Interleave Depth Supported
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int maxdepth : Should be between 0 and 3 depending on intlv buffer
++*                                 size 64-512
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
++{
++   DEV_HOST_msg_t aturMsg;
++   DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++   int rc;
++   dprintf(5," dslhal_api_setMaxInterleaverDepth()\n");
++   if(maxdepth>3)
++     {
++       dprintf(3,"Invalid Value for maximum interleave depth (must be <3)\n");
++       return DSLHAL_ERROR_INVALID_PARAM;
++     }
++
++   if(!ptidsl)
++    {
++      dprintf(3, "Error: PTIDSL pointer invalid\n");
++       return DSLHAL_ERROR_INVALID_PARAM;
++    }
++   pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
++                                      &aturMsg, sizeof(DEV_HOST_msg_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++
++  aturMsg.maxIntlvDepth = maxdepth;
++   
++   rc=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); 
++   if(rc)
++     return DSLHAL_ERROR_CONFIG_API_FAILURE;
++   dprintf(5," dslhal_api_setMaxInterleaverDepth() Done\n");
++   return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_acknowledgeInterrupt()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_acknowledgeInterrupt(tidsl_t * ptidsl)
++{
++  unsigned int interruptSources=0;
++  /* Clear out the DSLSS Interrupt Registers to acknowledge Interrupt */
++  if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_MAILBOX_INTERRUPTS)
++    {
++      DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_MAILBOX_INTERRUPTS;
++      dprintf(5,"Mailbox Interrupt \n");
++    }
++  if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_BITFIELD_INTERRUPTS)
++    {
++      DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_BITFIELD_INTERRUPTS;
++      dprintf(5,"Bitfield Interrupt \n");
++    }
++  if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_HEARTBEAT_INTERRUPTS)
++    {
++      DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_HEARTBEAT_INTERRUPTS;
++      dprintf(5,"HeartBeat Interrupt \n");
++    }
++  interruptSources = dslhal_support_parseInterruptSource(ptidsl);
++  if(interruptSources < 0)
++    return DSLHAL_ERROR_INTERRUPT_FAILURE;
++  else  
++    return interruptSources;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_disableDspHybridSelect(tidsl_t * ptidsl,unsigned int disable)
++{
++  int rc;
++  DEV_HOST_phyPerf_t phyPerf;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
++                                      &phyPerf, sizeof(DEV_HOST_phyPerf_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   if(disable==1)
++     {
++       phyPerf.disableDspHybridSelect_f = TRUE;
++       //       hybrid_selected = 888;
++     }
++   else
++     {
++       phyPerf.disableDspHybridSelect_f = FALSE;
++       //       hybrid_selected = 888;
++     }
++  rc=dslhal_support_blockWrite(&phyPerf,dspOamSharedInterface.phyPerf_p,sizeof(DEV_HOST_phyPerf_t)); 
++   if(rc)
++     return DSLHAL_ERROR_HYBRID_API_FAILURE;
++   else
++     return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_selectHybrid()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_selectHybrid(tidsl_t * ptidsl,unsigned int hybridNum)
++{
++  int rc;
++  DEV_HOST_phyPerf_t phyPerf;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  if(hybridNum<1||hybridNum>4)
++   {
++     dprintf(3,"Invalid Value for Hybrid Number \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++
++  if(!ptidsl)
++   {
++     dprintf(3, "Error: PTIDSL pointer invalid\n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
++                                      &phyPerf, sizeof(DEV_HOST_phyPerf_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   phyPerf.hostSelectHybridNum = hybridNum;
++   rc=dslhal_support_blockWrite(&phyPerf,dspOamSharedInterface.phyPerf_p,sizeof(DEV_HOST_phyPerf_t)); 
++   if(rc)
++     return DSLHAL_ERROR_HYBRID_API_FAILURE;
++   else
++     return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_reportHybridMetrics()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_reportHybridMetrics(tidsl_t * ptidsl,int *metric)
++{
++  int rc,i;
++  DEV_HOST_phyPerf_t phyPerf;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  if(hybrid_selected>5)
++    {
++      dprintf(4,"Hybrid Metrics Not Yet Available \n");
++    }
++  if(!ptidsl)
++   {
++     dprintf(3, "Error: PTIDSL pointer invalid\n");
++     return (0-DSLHAL_ERROR_INVALID_PARAM);
++   }  
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return (0-DSLHAL_ERROR_BLOCK_READ);
++     }
++   
++   dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
++                                      &phyPerf, sizeof(DEV_HOST_phyPerf_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return (0-DSLHAL_ERROR_BLOCK_READ);
++     }
++   rc = sizeof(phyPerf.hybridCost);
++   for(i=0;i<(rc/4);i++)
++     {
++       metric[i] = dslhal_support_byteSwap32(phyPerf.hybridCost[i]);
++     }
++   return hybrid_selected;
++}
++
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl,unsigned int pairSelect)
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction selects inner/outer pair on RJ11.  
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl , unsigned int pairSelect
++ *           
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *      
++ *****************************************************************************************/    
++unsigned int dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl,unsigned int pairSelect)
++{
++   int rc; 
++   
++   dprintf(5, "dslhal_api_sendQuiet\n"); 
++   rc = dslhal_support_writeHostMailbox(ptidsl, HOST_RJ11SELECT, (unsigned int)pairSelect, 0, 0); 
++   if(rc)
++    {  
++      dprintf(1,"dslhal_api_sendQuiet failed\n");  
++      return DSLHAL_ERROR_CTRL_API_FAILURE;    
++    }  
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl)
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction resets the failed state log stored
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl
++ *           
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *      
++ *****************************************************************************************/    
++unsigned int dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl)
++{
++    
++   int rc;
++   dprintf(5, "dslhal_api_resetTrainFailureLog \n"); 
++   for(rc=0;rc<ptidsl->AppData.trainFails;rc++)
++     {
++       ptidsl->AppData.trainFailStates[rc]=0;
++     }
++   ptidsl->AppData.trainFails = 0;
++   return DSLHAL_ERROR_NO_ERRORS; 
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_configureLed()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_configureLed(tidsl_t * ptidsl,unsigned int idLed, unsigned int onOff)
++{
++  int rc;
++  DEV_HOST_modemEnvPublic_t modemEnv;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  if(idLed>2 || onOff>2)
++   {
++     dprintf(3,"Invalid input parameter \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++
++  if(!ptidsl)
++   {
++     dprintf(3, "Error: PTIDSL pointer invalid\n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
++                                      &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   if(idLed==ID_DSL_LINK_LED)
++     {
++       modemEnv.overrideDslLinkLed_f = TRUE;
++       if(onOff!=2)
++          modemEnv.dslLinkLedState_f = onOff;
++     }
++   if(idLed==ID_DSL_ACT_LED)
++     {
++       modemEnv.overrideDslLinkLed_f = TRUE;
++       if(onOff!=2)
++          modemEnv.dslLinkLedState_f = onOff;
++     }
++   if(idLed==ID_RESTORE_DEFAULT_LED)
++     {
++       modemEnv.overrideDslLinkLed_f = FALSE;
++       modemEnv.overrideDslActLed_f = FALSE;
++     }
++   rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); 
++   if(rc)
++     return DSLHAL_ERROR_MODEMENV_API_FAILURE;
++   else
++     return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_configureExternBert()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_configureExternBert(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
++{
++  int rc;
++  DEV_HOST_modemEnvPublic_t modemEnv;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  if(configParm>1 || parmVal>1)
++   {
++     dprintf(3,"Invalid input parameter \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++
++  if(!ptidsl)
++   {
++     dprintf(3, "Error: PTIDSL pointer invalid\n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
++                                      &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   if(configParm==0)
++     {
++       modemEnv.externalBert = parmVal;
++     }
++   if(configParm==1)
++     {
++       modemEnv.usBertPattern = parmVal;
++     }
++   rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); 
++   if(rc)
++     return DSLHAL_ERROR_MODEMENV_API_FAILURE;
++   else
++     return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_configureAtmBert()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_configureAtmBert(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
++{
++  int rc;
++  DEV_HOST_atmDsBert_t atmDsBert;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  if(configParm>1 || parmVal>1)
++   {
++     dprintf(3,"Invalid input parameter \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++
++  if(!ptidsl)
++   {
++     dprintf(3, "Error: PTIDSL pointer invalid\n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.atmDsBert_p = (DEV_HOST_atmDsBert_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmDsBert_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmDsBert_p,
++                                      &atmDsBert, sizeof(DEV_HOST_atmDsBert_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   if(configParm==0)
++     {
++       atmDsBert.atmBertFlag = parmVal;
++       rc=dslhal_support_blockWrite(&atmDsBert,dspOamSharedInterface.atmDsBert_p,sizeof(DEV_HOST_atmDsBert_t)); 
++       if(rc)
++         return DSLHAL_ERROR_CONFIG_API_FAILURE;
++     }
++   if(configParm==1)
++     {
++       ptidsl->AppData.atmBertBitCountLow = atmDsBert.bitCountLow;
++       ptidsl->AppData.atmBertBitCountHigh = atmDsBert.bitCountHigh;
++       ptidsl->AppData.atmBertBitErrorCountLow = atmDsBert.bitErrorCountLow;
++       ptidsl->AppData.atmBertBitErrorCountHigh = atmDsBert.bitErrorCountHigh;
++     }
++   return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_configureDgaspLpr()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Configures dying gasp LPR signal
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_configureDgaspLpr(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
++{
++  int rc;
++  DEV_HOST_modemEnvPublic_t modemEnv;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  if(configParm>1 || parmVal>1)
++   {
++     dprintf(3,"Invalid input parameter \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++
++  if(!ptidsl)
++   {
++     dprintf(3, "Error: PTIDSL pointer invalid\n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++   
++   rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   
++   dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
++                                      &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
++   if (rc)
++     {
++       dprintf(1,"dslhal_support_blockRead failed\n");
++       return DSLHAL_ERROR_BLOCK_READ;
++     }
++   if(configParm==0)
++     {
++       modemEnv.dGaspLprIndicator_f = parmVal;
++     }
++   if(configParm==1)
++     {
++       modemEnv.overrideDspLprGasp_f = parmVal;
++     }
++   rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); 
++   if(rc)
++     return DSLHAL_ERROR_MODEMENV_API_FAILURE;
++   else
++     return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_genericDspRead()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Reads from a Generic Location in the DSP Host Interface
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_genericDspRead(tidsl_t * ptidsl,unsigned int offset1, unsigned int offset2, 
++                                       unsigned int offset3, unsigned char *localBuffer, unsigned int numBytes)
++{
++  int rc=0;
++  unsigned int  hostIfLoc,structLoc,elementLoc;
++  hostIfLoc = (unsigned int)ptidsl->pmainAddr;
++  if(numBytes<=0 || !localBuffer || !ptidsl)
++   {
++     dprintf(3,"Invalid input parameter \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++  rc += dslhal_support_blockRead((PVOID)(hostIfLoc+sizeof(int)*offset1), &structLoc,sizeof(int));
++  structLoc = dslhal_support_byteSwap32(structLoc);  
++  rc += dslhal_support_blockRead((PVOID)(structLoc+sizeof(int)*offset2), &elementLoc,sizeof(int));
++  elementLoc = dslhal_support_byteSwap32(elementLoc);    
++  dprintf(3,"Host IF Location: 0x%x  Struct1 Location: 0x%x Element Location: 0x%x \n",hostIfLoc, structLoc, elementLoc);
++  rc += dslhal_support_blockRead((PVOID)(elementLoc+(offset3*4)), localBuffer,numBytes);
++  if (rc)
++       return DSLHAL_ERROR_BLOCK_READ;
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_genericDspWrite()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Writes to a Generic Location in the DSP Host Interface
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_genericDspWrite(tidsl_t * ptidsl,unsigned int offset1, unsigned int offset2, 
++                                        unsigned int offset3, unsigned char *localBuffer, unsigned int numBytes)
++{
++
++  int rc=0;
++  unsigned int  hostIfLoc,structLoc,elementLoc;
++  hostIfLoc = (unsigned int)ptidsl->pmainAddr;
++  if(numBytes<=0 || !localBuffer || !ptidsl)
++   {
++     dprintf(3,"Invalid input parameter \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++  rc += dslhal_support_blockRead((PVOID)(hostIfLoc+(offset1*4)), &structLoc,4);  
++  structLoc = dslhal_support_byteSwap32(structLoc);  
++  rc += dslhal_support_blockRead((PVOID)(structLoc+(offset2*4)), &elementLoc,4);
++  elementLoc = dslhal_support_byteSwap32(elementLoc);  
++  dprintf(3,"Host IF Location: 0x%x  Struct1 Location: 0x%x Element Location: 0x%x \n",hostIfLoc, structLoc, elementLoc);
++  rc += dslhal_support_blockWrite(localBuffer,(PVOID)(elementLoc+(offset3*4)),numBytes);
++  if (rc)
++       return DSLHAL_ERROR_BLOCK_READ;
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_dspInterfaceRead()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Reads from a Generic Location in the DSP Host Interface
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_dspInterfaceRead(tidsl_t * ptidsl,unsigned int baseAddr, unsigned int numOffsets, 
++                                         unsigned int *offsets, unsigned char *localBuffer, unsigned int numBytes)
++{
++  int rc=0, off=0;
++  unsigned int  prevAddr,currAddr;
++  prevAddr = baseAddr;
++  if(numBytes<=0 || !localBuffer || !ptidsl || !offsets)
++   {
++     dprintf(3,"Invalid input parameter \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }
++  for(off=0;off<numOffsets-1;off++)
++    {
++      rc += dslhal_support_blockRead((PVOID)(prevAddr+(4*offsets[off])), &currAddr,4);
++      currAddr = dslhal_support_byteSwap32(currAddr);  
++      prevAddr = currAddr;
++      dprintf(5,"Curr Addr = 0x%x  Current Level: %d \n",currAddr,off);
++    }
++  currAddr = currAddr + offsets[numOffsets-1]*4;
++  rc += dslhal_support_blockRead((PVOID)(currAddr),localBuffer,numBytes);
++  if (rc)
++       return DSLHAL_ERROR_BLOCK_READ;
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_dspInterfaceWrite()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Writes to a Generic Location in the DSP Host Interface
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_dspInterfaceWrite(tidsl_t * ptidsl,unsigned int baseAddr, unsigned int numOffsets, 
++                                          unsigned int *offsets,unsigned char *localBuffer, unsigned int numBytes)
++{
++
++  int rc=0, off=0;
++  unsigned int  prevAddr,currAddr;
++  prevAddr = baseAddr;
++  if(numBytes<=0 || !localBuffer || !ptidsl || !offsets)
++   {
++     dprintf(3,"Invalid input parameter \n");
++     return DSLHAL_ERROR_INVALID_PARAM;
++   }  
++  for(off=0;off<numOffsets-1;off++)
++    {
++      rc += dslhal_support_blockRead((PVOID)(prevAddr+(4*offsets[off])), &currAddr,4);
++      currAddr = dslhal_support_byteSwap32(currAddr);  
++      prevAddr = currAddr;
++      dprintf(5,"Curr Addr = 0x%x  Current Level: %d \n",currAddr,off);
++    }
++  currAddr = currAddr + offsets[numOffsets-1]*4;
++  rc += dslhal_support_blockWrite(localBuffer,(PVOID)(currAddr),numBytes);
++  if (rc)
++       return DSLHAL_ERROR_BLOCK_READ;
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++
++/******************************************************************************************     
++ * FUNCTION NAME:    dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd)     
++ *     
++ *******************************************************************************************     
++ * DESCRIPTION: This fuction sends the passed mailbox command to the DSP     
++ *     
++ * INPUT:  PITIDSLHW_T *ptidsl     
++ *         unsigned int cmd
++ *            
++ * RETURN: 0 SUCCESS     
++ *         1 FAILED     
++ *       
++ *****************************************************************************************/     
++/* Function is commented out for now since, its not tested */
++ /*unsigned int dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd) 
++{ 
++   int rc;  
++    
++   dprintf(5, "dslhal_api_sendMailboxCommand\n");  
++   rc = dslhal_support_writeHostMailbox(ptidsl, cmd, 0, 0, 0);  
++   if(rc) 
++     {   
++      dprintf(1,"dslhal_api_sendMailboxCommand failed\n");   
++      return DSLHAL_ERROR_CTRL_API_FAILURE;    
++     }   
++    return DSLHAL_ERROR_NO_ERRORS; 
++} */
++
++
+diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_api.h linux.dev/drivers/atm/sangam_atm/dsl_hal_api.h
+--- linux.old/drivers/atm/sangam_atm/dsl_hal_api.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dsl_hal_api.h	2005-08-23 04:46:50.097843696 +0200
+@@ -0,0 +1,1721 @@
++#ifndef __DSL_HAL_API_H__
++#define __DSL_HAL_API_H__ 1
++/*******************************************************************************
++* FILE PURPOSE:     DSL HAL to Application Interface for Sangam
++*
++********************************************************************************
++* FILE NAME:        dsl_application_interface.h
++*
++* DESCRIPTION:  
++*       DSL-Application Interface Structures
++*                
++*
++* By: Ramakrishnan Parasuraman
++*                    
++* (C) Copyright 2003, Texas Instruments, Inc.
++*    History
++*    Data        Version    By               Notes
++*    06Feb03     0.00       RamP            Initial Version Written 
++*    07Apr03     0.01       RamP            Commented out typedefs
++*    09Apr03     0.02       RamP            Added deviceContext and extended
++*                                           dspVer to include bugfixes
++*    14Apr03     0.03       RamP            Added stateTransition to structure
++*    16Apr03     0.04       RamP            Removed typedefs; changed dspVer
++*    22Apr03     0.05       RamP            Moved acknowledgeInterrupt from
++*               (alpha)                     support module into this
++*    24Apr03     0.06       RamP            Moved the RSTATE enum from register
++*
++*    28Apr03     0.07       RamP            Added additional parameter to the
++*               (alpha +)                   handleInterrupt function for intrSrc
++*    14May03     0.08       RamP            Added hybrid switching APIs
++*               (alpha ++)                  Added statistics fields in AppData
++*                                           Added netService identifier
++*    20May03     0.09       RamP            Added Inner/Outer pair API support. 
++*                                           Added dying gasp message.
++*    29May03     0.10       RamP            Added coProfile structure                                       
++*    04Jun03     0.11       RamP            Added margin per tone statistics,
++*                                           Added timing counters, added train
++*                                           failure functions,added config flags
++*    06Jun03     0.12       RamP            Added LED, STM Bert, dGasp LPR 
++*                                           config API functions 
++*    09Jun03     0.13       RamP            Added ATM Bert function, CO stats
++*                                           Moved stateTransition to ITIDSLHW
++*               (Beta)                      Moved configFlag to ITIDSLHW, 
++*                                           Cleaned up fifoInfo structure
++*                                           Added US/DS R/S FEC parameters
++*    21Aug03     0.14       RamP            Added g.hs message buffer, us/ds
++*                                           bits n gains table, negoMsgs struct
++*               (act)                       bitswap stucts/indices, trainstate,
++*                                           Added functions for advanced config
++*                                           Added gross gain and line length
++*    29Sep03     0.15       RamP            Added tokens for advanced config 
++*                                           module api functions
++*    12Oct03     0.16       RamP            Added adsl2Msgs structure with worst
++*                                           case size for variable length msgs 
++*                                           Added API function prototypes
++*    21Oct03     0.17       RamP            Added typedef for current modem 
++*                                           user settings
++*    28Oct03     0.18       RamP            Added function to config blackout
++*                                           bitmap in the RMSGPCB message
++*    20Nov03     0.19       RamP            Added functions for generic and
++*                                           host interface read - write
++*    24Nov03     0.20       RamP            Added enum for detailed state track
++*                                           Added element for state bit fields
++*                                           Addded rState for encoded main state
++*                                           Added blackout valid flag
++*    26Dec03     0.21       RamP            Added defines for oamFeature masks
++*    30Dec03     0.22       RamP            Increased sizes for cMsgPcb,RMsgPcb
++*                                           to incorporate DELT mode messages
++*    30Dec03     0.23       RamP            Added generic mailbox command fxn
++*******************************************************************************/
++
++#ifdef INTERNAL_BUILD
++#include <dsl_hal_api_pvt.h>
++#endif
++
++#define NUM_PAGES 4
++#define OAMFEATURE_AUTORETRAIN_MASK       0x00000001
++#define OAMFEATURE_TC_SYNC_DETECT_MASK    0x00000002
++#define OAMFEATURE_EOCAOC_INTERRUPT_MASK  0x00000004
++#define OAMFEATURE_CONS_DISP_DISABLE_MASK 0x00000008
++#define OAMFEATURE_GHSMSG_INTERRUPT_MASK  0x00000010
++
++typedef struct tagTIOIDINFO
++{
++  unsigned int   bState;           /* addr->bDSPATURState    */ 
++  unsigned int   USConRate;        /* US Conection Rates */
++  unsigned int   DSConRate;        /* DS Connection Rates */
++  unsigned int   USPayload;        /* ennic_tx_pullup*/
++  unsigned int   DSPayload;        /* ennic_indicate_receive_packet*/
++  unsigned int   FrmMode;          /* addr->atur_msg.framing_mode*/
++  unsigned int   MaxFrmMode;          
++  unsigned int   TrainedPath;      /* Status of the Modem in which trained (Fast or Interleaved Path) */
++  unsigned int   TrainedMode;      /* Status of the mode in which the modem is trained (G.dmt, T1.413, etc) */
++  
++  /* Superframe Count */
++  unsigned int   usSuperFrmCnt;    /* Num of US Superframes */
++  unsigned int   dsSuperFrmCnt;    /* Num of DS Superframes */
++
++  /* LOS & SEF Stats */
++  unsigned int   LOS_errors;       /* Num of ADSL frames where loss-of-sync */
++  unsigned int   SEF_errors;       /* Num of severly errored ADSL frames - LOS > MAXBADSYNC ADSL frames */
++  unsigned int   coLosErrors; /* CO LOS Defects */
++  unsigned int   coRdiErrors; /* CO RDI defects */
++  /* CRC Stats */
++  unsigned int   usICRC_errors;    /* Num of Upstream CRC errored ADSL frames on Interleaved Path */
++  unsigned int   usFCRC_errors;    /* Num of Upstream CRC errored ADSL frames on Fast Path */
++  unsigned int   dsICRC_errors;    /* Num of Downstream CRC errored ADSL frames on Interleaved Path */
++  unsigned int   dsFCRC_errors;    /* Num of Downstream CRC errored ADSL frames on Fast Path */
++
++  /* FEC Stats */
++  unsigned int   usIFEC_errors;    /* Num of Upstream FEC errored (corrected) ADSL frames on Interleaved Path */
++  unsigned int   usFFEC_errors;    /* Num of Upstream FEC errored (corrected) ADSL frames on Fast Path */
++  unsigned int   dsIFEC_errors;    /* Num of Downstream FEC errored (corrected) ADSL frames on Interleaved Path */
++  unsigned int   dsFFEC_errors;    /* Num of Downstream FEC errored (corrected) ADSL frames on Fast Path */
++
++  /* NCD Stats */
++  unsigned int   usINCD_error;     /* UpStream No Cell Delineation on Interleaved Path */
++  unsigned int   usFNCD_error;     /* UpStream No Cell Delineation on Fast Path */
++  unsigned int   dsINCD_error;     /* Downstream No Cell Delineation on Interleaved Path */
++  unsigned int   dsFNCD_error;     /* Downstream No Cell Delineation on Fast Path */
++
++  /* LCD Stats */
++  unsigned int   usILCD_errors;    /* UpStream Loss of Cell Delineation (within the same connection) on Interleaved Path */
++  unsigned int   usFLCD_errors;    /* UpStream Loss of Cell Delineation (within the same connection) on Fast Path */
++  unsigned int   dsILCD_errors;    /* Downstream Loss of Cell Delineation (within the same connection) on Interleaved Path */
++  unsigned int   dsFLCD_errors;    /* Downstream Loss of Cell Delineation (within the same connection) on Fast Path */
++
++  /* HEC Stats */
++  unsigned int   usIHEC_errors;    /* Num of Upstream HEC errored ADSL frames on Interleaved Path */
++  unsigned int   usFHEC_errors;    /* Num of Upstream HEC errored ADSL frames on Fast Path */
++  unsigned int   dsIHEC_errors;    /* Num of Downstream HEC errored ADSL frames on Interleaved Path */
++  unsigned int   dsFHEC_errors;    /* Num of Downstream HEC errored ADSL frames on Fast Path */
++
++  /* Upstream ATM Stats */
++  unsigned int   usAtm_count[2];      /* Upstream Good Cell Count */
++  unsigned int   usIdle_count[2];     /* Upstream Idle Cell Count */
++  unsigned int   usPdu_count[2];      /* UpStream PDU Count */
++
++  /* Downstream ATM Stats */
++  unsigned int   dsGood_count[2];     /* Downstream Good Cell Count */
++  unsigned int   dsIdle_count[2];     /* Downstream Idle Cell Count */
++  unsigned int   dsBadHec_count[2];   /* Downstream Bad Hec Cell Count */
++  unsigned int   dsOVFDrop_count[2];  /* Downstream Overflow Dropped Cell Count */
++  unsigned int   dsPdu_count[2];      /* Downstream PDU Count */
++                             /* (only looks for end of pdu on good atm cells received, */
++                             /* not on Bad_Hec or Overflow cell) */
++
++  unsigned int   dsLineAttn;       /* DS Line Attenuation */
++  unsigned int   dsMargin;         /* Measured DS MArgin */
++
++  unsigned int   usLineAttn;
++  unsigned int   usMargin;
++
++  unsigned char    bCMsgs1[6];
++  unsigned char    bRMsgs1[6];
++  unsigned char    bCRates2;
++  unsigned char    bRRates2;
++  unsigned char    bRRates1[4][11];
++  unsigned char    bCMsgs2[4];
++  unsigned char    bCRates1[4][30];
++  unsigned char    bRMsgs2[4];
++   
++  unsigned int   USPeakCellRate; 
++  
++  unsigned int   dsl_status;
++  unsigned int   dsl_modulation;
++  unsigned char  dsl_ghsRxBuf[10][64];
++  unsigned char  dsl_GHS_msg_type[2];
++   
++  int     TxVCs[12];
++  int     RxVCs[12];
++
++  unsigned int   vci_vpi_val;
++
++  unsigned char  BitAllocTblDstrm[256]; 
++  unsigned char  BitAllocTblUstrm[32];  
++    signed char  marginTblDstrm[256];
++  unsigned char  rBng[512];
++  unsigned char  cBng[126];
++           int   usTxPower;
++           int   dsTxPower;
++         short   rxSnrPerBin0[256];
++         short   rxSnrPerBin1[256];
++         short   rxSnrPerBin2[256];
++
++  unsigned int   StdMode;
++  unsigned int   atucVendorId;
++  unsigned char  currentHybridNum;
++  unsigned char  atucRevisionNum; 
++  unsigned int   trainFails;
++  unsigned int   trainFailStates[30];
++  unsigned int   idleTick;
++  unsigned int   initTick;
++  unsigned int   showtimeTick; 
++  unsigned char  dsFastParityBytesPerSymbol;
++  unsigned char  dsIntlvParityBytesPerSymbol;
++  unsigned char  dsSymbolsPerCodeWord;
++  unsigned int   dsInterleaverDepth;
++  unsigned char  usFastParityBytesPerSymbol;
++  unsigned char  usIntlvParityBytesPerSymbol;
++  unsigned char  usSymbolsPerCodeWord;
++  unsigned int   usInterleaverDepth;
++  unsigned int   atmBertBitCountLow;
++  unsigned int   atmBertBitCountHigh;
++  unsigned int   atmBertBitErrorCountLow;
++  unsigned int   atmBertBitErrorCountHigh;
++  unsigned int   lineLength;
++  unsigned int   grossGain;
++           int   rxNoisePower0[256];
++           int   rxNoisePower1[256];
++}TIOIDINFO,*PTIOIDINFO;
++
++typedef struct{
++  unsigned char    bCMsgs1[6];
++  unsigned char    bCRates2;
++  unsigned char    bRRates2;
++  unsigned char    bRRates1[4][11];
++  unsigned char    bCMsgs2[4];
++  unsigned char    bCRates1[4][30];
++  unsigned char    bCRatesRA[4][30];
++  unsigned char    bRMsgs2[4];
++  unsigned char    bRRatesRA[4];
++  unsigned char    bRMsgsRA[12];
++  unsigned char    bCMsgsRA[6];
++}negoMsgs;
++
++typedef struct{
++  unsigned char    cMsgFmt[2];
++  unsigned char    rMsgFmt[2];
++  unsigned char    cMsgPcb[12];
++  unsigned char    rMsgPcb[70];
++  unsigned char    dummy1[2];
++  unsigned char    cMsg1[40];
++  unsigned char    rMsg1[4]; 
++  unsigned char    cMsg2[8];
++  unsigned char    rMsg2[64];
++  unsigned char    cParams[264];
++  unsigned char    rParams[2088];
++  unsigned short   cMsgPcbLen; 
++  unsigned short   rMsgPcbLen;
++  unsigned short   cMsg1Len; 
++  unsigned short   rMsg1Len;
++  unsigned short   cMsg2Len;
++  unsigned short   rMsg2Len;
++  unsigned short   cParamsLen;
++  unsigned short   rParamsLen;    
++}adsl2Msgs;
++
++typedef struct{
++  unsigned char    rMsg1Ld[16];
++  unsigned char    rMsg2Ld[260];
++  unsigned char    rMsg3Ld[260];
++  unsigned char    rMsg4Ld[260];
++  unsigned char    rMsg5Ld[260];
++  unsigned char    rMsg6Ld[260];
++  unsigned char    rMsg7Ld[260];
++  unsigned char    rMsg8Ld[260];
++  unsigned char    rMsg9Ld[260];
++  unsigned char    cMsg1Ld[16];
++  unsigned char    cMsg2Ld[260];
++  unsigned char    cMsg3Ld[132];
++  unsigned char    cMsg4Ld[68];
++  unsigned char    cMsg5Ld[68];
++  unsigned short   rMsg1LdLen;
++  unsigned short   rMsgxLdLen;
++  unsigned short   cMsg1LdLen;
++  unsigned short   cMsg2LdLen;
++  unsigned short   cMsg3LdLen;
++  unsigned short   cMsg4LdLen;
++  unsigned short   cMsg5LdLen;
++  unsigned short   dummy8;
++}adsl2DeltMsgs;
++
++typedef struct{
++  unsigned char    trellisFlag;
++  unsigned char    rateAdaptFlag;
++  unsigned char    marginMonitorTraining;
++  unsigned char    marginMonitorShowtime;  
++    signed char    marginThreshold;    
++  unsigned char    disableLosFlag;
++  unsigned char    aturConfig[30]; 
++  unsigned char    eocVendorId[8];
++  unsigned char    eocSerialNumber[32];
++  unsigned char    eocRevisionNumber[4];
++}currentPhySettings;
++
++
++typedef struct
++{
++  unsigned int  PmemStartWtAddr;              /* source address in host memory */
++  unsigned int  OverlayXferCount;             /* number of 32bit words to be transfered */
++  unsigned int  BinAddr;                      /* destination address in dsp's pmem */
++  unsigned int  overlayHostAddr;
++  unsigned int  olayPageCrc32;
++  unsigned int  SecOffset;
++} OlayDP_Def;
++
++typedef struct
++{
++  unsigned int    timeStamp; /* TimeStp revision  */
++  unsigned char   major;     /* Major revision    */
++  unsigned char   minor;     /* Minor revision    */
++  unsigned char   bugFix;    /* BugFix revision   */
++  unsigned char   buildNum;  /* BuildNum revision */
++  unsigned char   reserved;  /* for future use    */
++}dspVer;
++
++typedef struct{
++  unsigned char major;
++  unsigned char minor;
++  unsigned char bugfix;
++  unsigned char buildNum;
++  unsigned int  timeStamp;
++}dslVer;
++
++typedef struct{
++  unsigned char bitSwapCommand[6];
++  unsigned char bitSwapBinNum[6];
++  unsigned char bitSwapSFrmCnt;
++}dslBitSwapDef;
++
++typedef struct{
++  unsigned int aturState;
++  unsigned int subStateIndex;
++  unsigned int timeStamp;
++}trainStateInfo;
++
++typedef struct{
++  unsigned char ctrlBits;
++  unsigned char infoBits;
++}eocMessageDef;
++      
++enum
++{
++  RSTATE_TEST,
++  RSTATE_IDLE,
++  RSTATE_INIT,
++  RSTATE_HS,
++  RSTATE_RTDL,
++  RSTATE_SHOWTIME,
++};
++
++typedef enum
++{
++  ATU_RZERO1      = 100,
++  ATU_RTEST       = 101,
++  ATU_RIDLE       = 102,
++  ATU_RINIT       = 103,
++  ATU_RRESET      = 104,
++  GDMT_NSFLR      = 105,
++  GDMT_TONE       = 106,
++  GDMT_SILENT     = 107,
++  GDMT_NEGO       = 108,
++  GDMT_FAIL       = 109,
++  GDMT_ACKX       = 110,
++  GDMT_QUIET2     = 111,
++  ATU_RZERO2      = 200,
++  T1413_NSFLR     = 201,
++  T1413_ACTREQ    = 202,
++  T1413_ACTMON    = 203,
++  T1413_FAIL      = 204,
++  T1413_ACKX      = 205,
++  T1413_QUIET2    = 206,
++  ATU_RQUIET2     = 207,
++  ATU_RREVERB1    = 208,
++  ATU_RQUIET3     = 209,
++  ATU_RECT        = 210,
++  ATU_RREVERB2    = 211,
++  ATU_RSEGUE1     = 212,
++  ATU_RREVERB3    = 213,
++  ATU_RSEGUE2     = 214,
++  ATU_RRATES1     = 215,
++  ATU_RMSGS1      = 216,
++  ATU_RMEDLEY     = 217,
++  ATU_RREVERB4    = 218,
++  ATU_RSEGUE3     = 219,
++  ATU_RMSGSRA     = 220,
++  ATU_RRATESRA    = 221,
++  ATU_RREVERBRA   = 222,
++  ATU_RSEGUERA    = 223,
++  ATU_RMSGS2      = 224,
++  ATU_RRATES2     = 225,
++  ATU_RREVERB5    = 226,
++  ATU_RSEGUE4     = 227,
++  ATU_RBNG        = 228,
++  ATU_RREVERB6    = 229,
++  ATU_RSHOWTIME   = 230,
++  ATU_RZERO3      = 300,
++  ADSL2_QUIET1    = 301,
++  ADSL2_COMB1     = 302,
++  ADSL2_QUIET2    = 303,
++  ADSL2_COMB2     = 304,
++  ADSL2_ICOMB1    = 305,
++  ADSL2_LINEPROBE = 306,
++  ADSL2_QUIET3    = 307,
++  ADSL2_COMB3     = 308,
++  ADSL2_ICOMB2    = 309,
++  ADSL2_RMSGFMT   = 310,
++  ADSL2_RMSGPCB   = 311,
++  ADSL2_REVERB1   = 312,
++  ADSL2_QUIET4    = 313,
++  ADSL2_REVERB2   = 314,
++  ADSL2_QUIET5    = 315,
++  ADSL2_REVERB3   = 316,
++  ADSL2_ECT       = 317,
++  ADSL2_REVERB4   = 318,
++  ADSL2_SEGUE1    = 319,
++  ADSL2_REVERB5   = 320,
++  ADSL2_SEGUE2    = 321,
++  ADSL2_RMSG1     = 322,
++  ADSL2_MEDLEY    = 323,
++  ADSL2_EXCHANGE  = 324,
++  ADSL2_RMSG2     = 325,
++  ADSL2_REVERB6   = 326,
++  ADSL2_SEGUE3    = 327,
++  ADSL2_RPARAMS   = 328,
++  ADSL2_REVERB7   = 329,
++  ADSL2_SEGUE4    = 330,
++  ATU_RZERO4      = 400,
++  DELT_SEGUE1     = 401,
++  DELT_REVERB5    = 402,
++  DELT_SEGUE2     = 403,
++  DELT_EXCHANGE   = 404,
++  DELT_SEGUELD    = 405,
++  DELT_RMSGLD     = 406,
++  DELT_QUIET1LD   = 407,
++  DELT_QUIET2LD   = 408,
++  DELT_RACK1      = 409,
++  DELT_RNACK1     = 410,
++  DELT_QUIETLAST  = 411
++} modemStates_t;  
++
++enum
++{
++  DSLTRAIN_NO_MODE,
++  DSLTRAIN_MULTI_MODE,
++  DSLTRAIN_T1413_MODE,
++  DSLTRAIN_GDMT_MODE,
++  DSLTRAIN_GLITE_MODE
++};
++
++enum
++{
++  ID_RESTORE_DEFAULT_LED,
++  ID_DSL_LINK_LED,
++  ID_DSL_ACT_LED
++};
++
++typedef struct _ITIDSLHW
++{
++  /* struct _TIDSL_IHwVtbl * pVtbl; */
++  unsigned char*     fwimage;
++  void*     pmainAddr;
++  void*     pOsContext;
++  unsigned int     ReferenceCount;
++  unsigned int     netService;  
++
++  int     InitFlag;
++
++  int     imagesize;
++  
++  unsigned int     lConnected;
++  unsigned int     bStatisticsInitialized;
++  unsigned int     rState;
++  unsigned int     bShutdown; 
++  unsigned int     blackOutValid_f;
++  unsigned char    blackOutBits[64];
++  unsigned int     bAutoRetrain;
++  volatile unsigned int     bOverlayPageLoaded;
++  unsigned int     stateTransition;
++  unsigned int     configFlag;
++  unsigned int     dsBitSwapInx;
++  unsigned int     usBitSwapInx;
++  unsigned int     trainStateInx;
++  unsigned int     usEocMsgInx;
++  unsigned int     dsEocMsgInx;
++  unsigned int     reasonForDrop;
++  TIOIDINFO  AppData;
++  dspVer     dspVer;
++
++  OlayDP_Def olayDpPage[NUM_PAGES];
++  OlayDP_Def coProfiles;
++  OlayDP_Def constDisplay;
++  dslBitSwapDef dsBitSwap[30];
++  dslBitSwapDef usBitSwap[30];  
++  trainStateInfo trainHistory[120];
++  eocMessageDef usEocMsgBuf[30];
++  eocMessageDef dsEocMsgBuf[30];
++  adsl2Msgs     adsl2TrainingMessages;
++  adsl2DeltMsgs adsl2DiagnosticMessages;
++  unsigned int modemStateBitField[4];
++#ifdef INTERNAL_BUILD
++  internalParameters internalVars;
++#endif
++} ITIDSLHW_T, *PITIDSLHW_T, tidsl_t;
++
++
++/**********************************************************************************
++* API proto type defines
++**********************************************************************************/
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_dslStartup
++*
++*******************************************************************************************
++* DESCRIPTION: Entry point to initialize and load ax5 daughter board
++*
++* INPUT:   PITIDSLHW_T *ppIHw  
++*
++* RETURN:  0 --succeeded
++*          1 --Failed
++*
++* Notes: external function osAllocateMemory(), osZeroMemory(), osLoadFWImage() are required
++*****************************************************************************************/
++int dslhal_api_dslStartup
++(
++ PITIDSLHW_T *ppIHw
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_gatherStatistics
++*
++*********************************************************************************************
++* DESCRIPTION: Read statistical infromation from ax5 modem daugter card. 
++* Input: tidsl_t *ptidsl
++* 
++* Return: 0    success
++*         1    failed
++*
++********************************************************************************************/
++
++void dslhal_api_gatherStatistics
++(
++ tidsl_t * ptidsl
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_initStatistics
++*
++*********************************************************************************************
++* DESCRIPTION: init statistical infromation of ax5 modem daugter card. 
++*
++* Input: tidsl_t *ptidsl
++* 
++* Return: NULL
++*         
++********************************************************************************************/
++
++void dslhal_api_initStatistics
++(
++ tidsl_t * ptidsl
++);
++
++
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_getDslDriverVersion
++*
++*******************************************************************************************
++* DESCRIPTION: This routine supply DSL Driver version.
++*
++* INPUT:  tidsl_t * ptidsl
++*         void *pVer, DSP Driver Version Pointer
++*         
++* RETURN:  0 --succeeded
++*          1 --Failed
++* Note: See verdef_u.h for version structure definition.
++*****************************************************************************************/
++
++void dslhal_api_getDslHalVersion
++(
++ void  *pVer
++);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_dslShutdown
++*
++*******************************************************************************************
++* DESCRIPTION: routine to shutdown ax5 modem and free the resource
++*
++* INPUT:   tidsl_t *ptidsl  
++*
++* RETURN:  NULL
++*          
++* Notes: external function osFreeMemory() is required.
++*****************************************************************************************/
++
++int dslhal_api_dslShutdown
++(
++ tidsl_t *ptidsl
++);
++
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_getDspVersion
++*
++*******************************************************************************************
++* DESCRIPTION: This routine supply AX5 daugther card DSP version.
++*
++* INPUT:  tidsl_t * ptidsl
++*         void *pVer, DSP version struct is returned starting at this pointer
++*         
++* RETURN:  0 --succeeded
++*          1 --Failed
++* 
++*****************************************************************************************/
++
++int dslhal_api_getDspVersion
++(
++ tidsl_t *ptidsl,
++ void  *pVer
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_digi_memTestA()
++*
++*********************************************************************************************
++* DESCRIPTION: This function does the digital tests on the DSP. It does the DSP ID test,
++*              memory tests on the external and internal memories of DSP, Codec Interconnect 
++*              test and Interrupt Test.
++*
++* Input:       Test selects the test to be performed based on the elements set of 9 element
++*              array passed the the parameter. 
++*             
++* Return:      Status of the Tests Failed
++*         
++********************************************************************************************/
++
++unsigned int dslhal_diags_digi_memTestA
++(
++unsigned int*   Test
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_digi_memTestB()
++*
++*********************************************************************************************
++* DESCRIPTION: This function does the digital tests on the DSP. It does the DSP ID test,
++*              memory tests on the external and internal memories of DSP, Codec Interconnect 
++*              test and Interrupt Test.
++*
++* Input:       Test selects the digital test to be performed.
++* 
++* Return:      Status of the Tests Failed
++*         
++********************************************************************************************/
++
++unsigned int dslhal_diags_digi_memTestB
++(
++unsigned int   Test,
++unsigned int   *Status
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_anlg_tonesTestA()
++*
++*********************************************************************************************
++* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
++*              tones and Medley's with missing tones. These signals are defined in ITU 
++*              G.992.1 ADSL Standards.
++*
++* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
++*        Array is a 64 element unsigned integer type array. The element of this array
++*              describe which tones are to be generated by selecting the element of
++*              the array to be non zero.
++* Return: NULL
++*         
++********************************************************************************************/
++
++void dslhal_diags_anlg_tonesTestA
++(
++unsigned int   Test, 
++unsigned int* Array
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_anlg_tonesTestB()
++*
++*********************************************************************************************
++* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
++*              tones and Medley's with missing tones. These signals are defined in ITU 
++*              G.992.1 ADSL Standards.
++*
++* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
++*        Array is a 64 element unsigned integer type array. The element of this array
++*              describe which tones are to be generated by selecting the element of
++*              the array to be non zero.
++* Return: NULL
++*         
++********************************************************************************************/
++
++void dslhal_diags_anlg_tonesTestB
++(
++unsigned int   Test, 
++unsigned int  Tones
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_anlg_rxNoiseTest()
++*
++*********************************************************************************************
++* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
++*              tones and Medley's with missing tones. These signals are defined in ITU 
++*              G.992.1 ADSL Standards.
++*
++* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
++*        Tones selects the .
++* Return: NULL
++*         
++********************************************************************************************/
++
++void dslhal_diags_anlg_rxNoiseTest
++(int agcFlag,
++short pga1, 
++short pga2, 
++short pga3, 
++short aeq
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_anlg_ecNoiseTest()
++*
++*********************************************************************************************
++* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
++*              tones and Medley's with missing tones. These signals are defined in ITU 
++*              G.992.1 ADSL Standards.
++*
++* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
++*        Tones selects the .
++* Return: NULL
++*         
++********************************************************************************************/
++
++void dslhal_diags_anlg_ecNoiseTest
++(int agcFlag,
++short pga1, 
++short pga2, 
++short pga3, 
++short aeq
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_pollTrainingStatus()
++*
++*********************************************************************************************
++* DESCRIPTION: code to decode modem status and to start modem training 
++*
++* Input: tidsl_t *ptidsl
++* 
++* Return: 0-? status mode training
++*         -1    failed
++*
++********************************************************************************************/
++int dslhal_api_pollTrainingStatus
++(
++ tidsl_t *ptidsl
++);
++
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_handleTrainingInterrupt()
++*
++*********************************************************************************************
++* DESCRIPTION: Code to handle ax5 hardware interrupts
++*
++* Input: tidsl_t *ptidsl
++*        int *pMsg, pointer to returned hardware messages. Each byte represent a messge
++*        int *pTag, pointer to returned hardware message tags. Each byte represent a tag.
++* Return: 0    success  
++*         1    failed
++*
++********************************************************************************************/
++int dslhal_api_handleTrainingInterrupt
++(
++ tidsl_t *ptidsl,
++ int intrSource
++);
++
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNumber)    
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction Sets the EOC Serial Number    
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl    
++ *         char *SerialNumber : Input EOC Serial Number  
++ *    
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *    
++ *****************************************************************************************/    
++unsigned int dslhal_api_setEocSerialNumber 
++( 
++tidsl_t *ptidsl, 
++char *SerialNumber 
++);    
++ 
++/******************************************************************************************     
++ * FUNCTION NAME:    dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID)     
++ *     
++ *******************************************************************************************     
++ * DESCRIPTION: This fuction Sets the EOC Serial Number     
++ *     
++ * INPUT:  PITIDSLHW_T *ptidsl     
++ *         char *VendorID : EOC Vendor ID   
++ *     
++ * RETURN: 0 SUCCESS     
++ *         1 FAILED     
++ *     
++ *****************************************************************************************/     
++unsigned int dslhal_api_setEocVendorId  
++(  
++tidsl_t *ptidsl,  
++char *VendorID  
++);     
++ 
++/******************************************************************************************     
++ * FUNCTION NAME:    dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNum)     
++ *     
++ *******************************************************************************************     
++ * DESCRIPTION: This fuction Sets the EOC Revision Number     
++ *     
++ * INPUT:  PITIDSLHW_T *ptidsl     
++ *         char *RevNum : Input EOC Revision Number   
++ *     
++ * RETURN: 0 SUCCESS     
++ *         1 FAILED     
++ *     
++ *****************************************************************************************/     
++unsigned int dslhal_api_setEocRevisionNumber 
++( 
++tidsl_t *ptidsl, 
++char *RevNumber 
++);     
++ 
++/******************************************************************************************      
++ * FUNCTION NAME:    dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)      
++ *      
++ *******************************************************************************************      
++ * DESCRIPTION: This fuction Sets the EOC ATUR Config Register  
++ *      
++ * INPUT:  PITIDSLHW_T *ptidsl      
++ *         char *RevNum : Input EOC ATUR Config Register    
++ *      
++ * RETURN: 0 SUCCESS      
++ *         1 FAILED      
++ *      
++ *****************************************************************************************/      
++unsigned int dslhal_api_setAturConfig 
++(  
++tidsl_t *ptidsl,  
++char *ATURConfig 
++);      
++ 
++/******************************************************************************************   
++ * FUNCTION NAME:    dslhal_api_disableLosAlarm(tidsl_t *ptidsl, unsigned int set)   
++ *   
++ *******************************************************************************************   
++ * DESCRIPTION: This fuction disables all the LOS alarms   
++ *   
++ * INPUT:  PITIDSLHW_T *ptidsl   
++ *         unsigned int set // if set == TRUE : Disable LOS alarms, else enable
++ *          
++ * RETURN: 0 SUCCESS   
++ *         1 FAILED   
++ * NOTES:  Currently not supported in any version other than MR4 Patch release..    
++ *****************************************************************************************/   
++unsigned int dslhal_api_disableLosAlarm 
++( 
++tidsl_t *ptidsl,
++unsigned int 
++);   
++  
++/******************************************************************************************   
++ * FUNCTION NAME:    dslhal_api_sendIdle(tidsl_t *ptidsl)   
++ *   
++ *******************************************************************************************   
++ * DESCRIPTION: This fuction sends the CMD_IDLE message to the DSP   
++ *   
++ * INPUT:  PITIDSLHW_T *ptidsl   
++ *          
++ * RETURN: 0 SUCCESS   
++ *         1 FAILED   
++ *     
++ *****************************************************************************************/   
++unsigned int dslhal_api_sendIdle 
++( 
++tidsl_t *ptidsl 
++);   
++ 
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_sendQuiet(tidsl_t *ptidsl)    
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP    
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl    
++ *           
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *      
++ *****************************************************************************************/    
++unsigned int dslhal_api_sendQuiet  
++(  
++tidsl_t *ptidsl  
++);    
++
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_sendDgasp(tidsl_t *ptidsl)    
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction sends the HOST_DGASP message to the DSP    
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl    
++ *           
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *      
++ *****************************************************************************************/    
++unsigned int dslhal_api_sendDgasp  
++(  
++tidsl_t *ptidsl  
++);    
++
++/******************************************************************************************    
++ * FUNCTION NAME:    dslhal_api_setMarginThreshold(tidsl_t *ptidsl, int threshold)    
++ *    
++ *******************************************************************************************    
++ * DESCRIPTION: This fuction does sets the Margin threshold   
++ *    
++ * INPUT:  PITIDSLHW_T *ptidsl    
++ *         int threshold   
++ *          
++ *                                    
++ * RETURN: 0 SUCCESS    
++ *         1 FAILED    
++ *    
++ *****************************************************************************************/    
++unsigned int dslhal_api_setMarginThreshold 
++( 
++tidsl_t *ptidsl, 
++int threshold 
++); 
++
++
++/******************************************************************************************  
++ * FUNCTION NAME:    dslhal_api_setMarginMonitorFlags(tidsl_t *ptidsl, unsigned int trainflag,unsigned int shwtflag)  
++ *  
++ *******************************************************************************************  
++ * DESCRIPTION: This fuction does sets the Margin monitoring flag 
++ *  
++ * INPUT:  PITIDSLHW_T *ptidsl  
++ *         unsigned int trainflag 
++ *         unsigned int shwtflag  
++ *                                  
++ * RETURN: 0 SUCCESS  
++ *         1 FAILED  
++ *  
++ *****************************************************************************************/  
++unsigned int dslhal_api_setMarginMonitorFlags
++(
++tidsl_t *ptidsl,
++unsigned int trainflag,
++unsigned int shwtflag
++);  
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Rate Adapt Enable Flag
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int flag //if flag = TRUE set flag else reset
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setRateAdaptFlag
++(
++tidsl_t *ptidsl,
++unsigned int flag
++);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setTrellisFlag(tidsl_t *ptidsl, unsigned int flag)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Trellis Coding Enable Flag
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int flag //if flag = TRUE set flag else reset
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setTrellisFlag
++(
++tidsl_t *ptidsl,
++unsigned int flag
++);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Maximum bits per carrier value
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int maxbits : should be a value between 0-15
++*
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setMaxBitsPerCarrier
++(
++tidsl_t *ptidsl,
++unsigned int maxbits
++);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the Maximum Interleave Depth Supported
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int maxdepth : Should be between 0 and 3 depending on intlv buffer
++*                                 size 64-512
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++unsigned int dslhal_api_setMaxInterleaverDepth
++(
++tidsl_t *ptidsl,
++unsigned int maxdepth
++);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction Sets the desired training mode(none/T1.413/G.dmt/G.lite)
++*
++* INPUT:  PITIDSLHW_T *ptidsl
++*         unsigned int trainmode :Should be between 0 and 4; 0:No Mode 1:Multimode
++*                                 2: T1.413, 3:G.dmt, 4: G.lite
++* RETURN: 0 SUCCESS
++*         1 FAILED
++*
++*****************************************************************************************/
++
++unsigned int dslhal_api_setTrainingMode
++(
++tidsl_t *ptidsl,
++unsigned int trainmode
++);
++
++/******************************************************************************************   
++ * FUNCTION NAME:    dslhal_api_dslRetrain(tidsl_t *ptidsl)   
++ *   
++ *******************************************************************************************   
++ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP   
++ *   
++ * INPUT:  PITIDSLHW_T *ptidsl   
++ *          
++ * RETURN: 0 SUCCESS   
++ *         1 FAILED   
++ *     
++ *****************************************************************************************/   
++unsigned int dslhal_api_dslRetrain 
++( 
++tidsl_t *ptidsl 
++);   
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_acknowledgeInterrupt()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_acknowledgeInterrupt
++(tidsl_t * ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_disableDspHybridSelect
++(tidsl_t * ptidsl,
++ unsigned int disable
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_selectHybrid
++(tidsl_t * ptidsl,
++ unsigned int hybridNum
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_reportHybridMetrics()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_reportHybridMetrics
++(tidsl_t * ptidsl,
++ int     *metric
++);
++
++/******************************************************************************************   
++ * FUNCTION NAME:    dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl, unsigned int pairSelect)   
++ *   
++ *******************************************************************************************   
++ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP   
++ *   
++ * INPUT:  PITIDSLHW_T *ptidsl   
++ *          
++ * RETURN: 0 SUCCESS   
++ *         1 FAILED   
++ *     
++ *****************************************************************************************/   
++
++unsigned int dslhal_api_selectInnerOuterPair
++(tidsl_t *ptidsl,
++unsigned int pairSelect
++);
++
++/******************************************************************************************   
++ * FUNCTION NAME:    dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl, unsigned int pairSelect)   
++ *   
++ *******************************************************************************************   
++ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP   
++ *   
++ * INPUT:  PITIDSLHW_T *ptidsl   
++ *          
++ * RETURN: 0 SUCCESS   
++ *         1 FAILED   
++ *     
++ *****************************************************************************************/   
++
++unsigned int dslhal_api_resetTrainFailureLog
++(tidsl_t *ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_controlLed()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_configureLed
++(tidsl_t * ptidsl,
++unsigned int idLed, 
++unsigned int onOff
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_configureExternBert()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_configureExternBert
++(tidsl_t * ptidsl,
++unsigned int configParm, 
++unsigned int parmVal
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_configureAtmBert()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_configureAtmBert
++(tidsl_t * ptidsl,
++unsigned int configParm, 
++unsigned int parmVal
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_configureDgaspLpr()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_configureDgaspLpr
++(tidsl_t * ptidsl,
++unsigned int configParm, 
++unsigned int parmVal
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_onOffPcb()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_onOffPcb
++(tidsl_t * ptidsl,
++unsigned int onOff
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_onOffBitSwap()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Turns on / off the power cutback feature; 
++* Input
++*         usDs;  0 = us  and 1 = ds;
++*         onOff; 0 = OFF and 1 = ON
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_onOffBitSwap
++(tidsl_t * ptidsl,
++ unsigned int usDs, 
++ unsigned int onOff
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_configDsTones()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Turns on / off specific tones in the downstream direction; 
++* Input
++*        pointer to the array specifying the tones to be turned on/off 
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_configDsTones
++(tidsl_t * ptidsl,
++ unsigned int *dsTones
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_getAocBitSwapBuffer()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Fetches the Tx/Rx AOC bitswap Buffer; 
++* Input
++*        Transmit / Receive buffer to be fetched 
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_getAocBitswapBuffer
++(tidsl_t * ptidsl,
++unsigned int usDs
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_readTrainingMessages()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Reads all the training messages on demand; 
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        void *msgStruct : Pointer to Message Structure 
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_readTrainingMessages
++(tidsl_t * ptidsl,
++void *msgPtr
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_getTrainingState()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Reads all the training messages on demand; 
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        void *msgStruct : Pointer to training state structure 
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_getTrainingState
++(tidsl_t * ptidsl,
++void *statePtr
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_resetBitSwapMessageLog()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Clears the Aoc Bitswap Message Log 
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        unsigned int usDs ; Upstream=0, Downstream=1
++*
++* Return: 0  success
++*         1  failed
++* 
++********************************************************************************************/
++unsigned int dslhal_advcfg_resetBitSwapMessageLog
++(tidsl_t * ptidsl, 
++ unsigned int usDs
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_setConstellationBinNumber()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Specifies the bin number for which constellation data should be fetched
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        unsigned int binNum : constellation bin number whose data is required
++*
++* Return: 0  success
++*         1  failed
++* 
++********************************************************************************************/
++unsigned int dslhal_advcfg_setConstellationBinNumber
++(tidsl_t * ptidsl, 
++ unsigned int binNum
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_resetTrainStateHistory()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Clears the Training State History Log 
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++********************************************************************************************/
++unsigned int dslhal_advcfg_resetTrainStateHistory
++(tidsl_t * ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_getSnrPerBin()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Get SNR data per bin 
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++********************************************************************************************/
++unsigned int dslhal_advcfg_getSnrPerBin
++(tidsl_t * ptidsl,
++ unsigned int snrBufferOpt
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_logEocMessages()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Logs EOC messages sent by the Modem to the CO
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        unsigned int eocLowerBytes : Lower [1-5] bits of EOC Message
++*        unsigned int eocUpperBytes : Upper [6-13] bits of EOC Message
++*
++* Return: 0  success
++*         1  failed
++* 
++********************************************************************************************/
++unsigned int dslhal_advcfg_logEocMessages
++(tidsl_t * ptidsl, 
++ unsigned int usDs,
++ unsigned int eocLowerBytes, 
++ unsigned int eocUpperBytes
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_getReasonForDrop()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Reads the reason for dropping DSL connection; 
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_getReasonForDrop
++(tidsl_t * ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_ctrlMaxAvgFineGains()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Turns on / off the host control for Max Avg Fine Gains; 0 = OFF and 1 = ON
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_ctrlMaxAvgFineGains
++(tidsl_t * ptidsl,
++unsigned int onOff
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_setMaxAvgFineGain()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Set the Maximum Average Fine Gain Value
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_setMaxAvgFineGain
++(tidsl_t * ptidsl,
++ short fineGain
++);
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_readPhySettings()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Reads the advanced Phy layer settings on demand; 
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        void *cfgStruct : Pointer to Phy Config Structure 
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_readPhySettings
++(tidsl_t * ptidsl,
++void *cfgPtr
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_advcfg_setBlackOutBits()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the Blackout Bits in the RMSGPCB message
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_advcfg_setBlackOutBits
++(tidsl_t * ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_genericDspRead()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*  Reads from a generic location in the host interface
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_genericDspRead
++(tidsl_t * ptidsl,
++ unsigned int offset1,
++ unsigned int offset2,
++ unsigned int offset3,
++ unsigned char* localBuffer,
++ unsigned int numBytes
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_genericDspWrite()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*  Writes to a generic location in the host interface
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_genericDspWrite
++(tidsl_t * ptidsl,
++ unsigned int offset1,
++ unsigned int offset2,
++ unsigned int offset3,
++ unsigned char* localBuffer,
++ unsigned int numBytes
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_dspInterfaceRead()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*  Reads from a generic location in the host interface
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_dspInterfaceRead
++(tidsl_t * ptidsl,
++ unsigned int baseAddr,
++ unsigned int numOffsets,
++ unsigned int *offsets,
++ unsigned char* localBuffer,
++ unsigned int numBytes
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_api_dspInterfaceWrite()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*  Writes to a generic location in the host interface
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_api_dspInterfaceWrite
++(tidsl_t * ptidsl,
++ unsigned int baseAddr,
++ unsigned int numOffsets,
++ unsigned int *offsets,
++ unsigned char* localBuffer,
++ unsigned int numBytes
++);
++
++/******************************************************************************************     
++ * FUNCTION NAME:    dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd)     
++ *     
++ *******************************************************************************************     
++ * DESCRIPTION: This fuction sends the passed mailbox command to the DSP     
++ *     
++ * INPUT:  PITIDSLHW_T *ptidsl     
++ *         unsigned int cmd
++ *            
++ * RETURN: 0 SUCCESS     
++ *         1 FAILED     
++ *       
++ *****************************************************************************************/     
++unsigned int dslhal_api_sendMailboxCommand
++(tidsl_t *ptidsl, 
++unsigned int cmd
++); 
++
++#ifdef INTERNAL_BUILD
++#include <dsl_hal_internal_api.h>
++#endif
++
++
++#endif /* pairs #ifndef __DSL_APPLICATION_INTERFACE_H__ */
+diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_logtable.h linux.dev/drivers/atm/sangam_atm/dsl_hal_logtable.h
+--- linux.old/drivers/atm/sangam_atm/dsl_hal_logtable.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dsl_hal_logtable.h	2005-08-23 04:46:50.097843696 +0200
+@@ -0,0 +1,259 @@
++unsigned int log10[]=
++{
++           0,
++         771,
++        1221,
++        1541,
++        1789,
++        1992,
++        2163,
++        2312,
++        2443,
++        2560,
++        2666,
++        2763,
++        2852,
++        2934,
++        3011,
++        3083,
++        3150,
++        3213,
++        3274,
++        3331,
++        3385,
++        3437,
++        3486,
++        3533,
++        3579,
++        3622,
++        3664,
++        3705,
++        3744,
++        3781,
++        3818,
++        3853,
++        3887,
++        3921,
++        3953,
++        3984,
++        4015,
++        4044,
++        4073,
++        4101,
++        4129,
++        4156,
++        4182,
++        4207,
++        4232,
++        4257,
++        4281,
++        4304,
++        4327,
++        4349,
++        4371,
++        4393,
++        4414,
++        4435,
++        4455,
++        4475,
++        4495,
++        4514,
++        4533,
++        4552,
++        4570,
++        4589,
++        4606,
++        4624,
++        4641,
++        4658,
++        4675,
++        4691,
++        4707,
++        4723,
++        4739,
++        4755,
++        4770,
++        4785,
++        4800,
++        4815,
++        4829,
++        4844,
++        4858,
++        4872,
++        4886,
++        4899,
++        4913,
++        4926,
++        4939,
++        4952,
++        4965,
++        4978,
++        4990,
++        5003,
++        5015,
++        5027,
++        5039,
++        5051,
++        5063,
++        5075,
++        5086,
++        5098,
++        5109,
++        5120,
++        5131,
++        5142,
++        5153,
++        5164,
++        5174,
++        5185,
++        5195,
++        5206,
++        5216,
++        5226,
++        5236,
++        5246,
++        5256,
++        5266,
++        5275,
++        5285,
++        5295,
++        5304,
++        5313,
++        5323,
++        5332,
++        5341,
++        5350,
++        5359,
++        5368,
++        5377,
++        5386,
++        5394,
++        5403,
++        5412,
++        5420,
++        5429,
++        5437,
++        5445,
++        5454,
++        5462,
++        5470,
++        5478,
++        5486,
++        5494,
++        5502,
++        5510,
++        5518,
++        5525,
++        5533,
++        5541,
++        5548,
++        5556,
++        5563,
++        5571,
++        5578,
++        5586,
++        5593,
++        5600,
++        5607,
++        5614,
++        5622,
++        5629,
++        5636,
++        5643,
++        5649,
++        5656,
++        5663,
++        5670,
++        5677,
++        5683,
++        5690,
++        5697,
++        5703,
++        5710,
++        5716,
++        5723,
++        5729,
++        5736,
++        5742,
++        5749,
++        5755,
++        5761,
++        5767,
++        5773,
++        5780,
++        5786,
++        5792,
++        5798,
++        5804,
++        5810,
++        5816,
++        5822,
++        5828,
++        5834,
++        5839,
++        5845,
++        5851,
++        5857,
++        5862,
++        5868,
++        5874,
++        5879,
++        5885,
++        5891,
++        5896,
++        5902,
++        5907,
++        5913,
++        5918,
++        5924,
++        5929,
++        5934,
++        5940,
++        5945,
++        5950,
++        5955,
++        5961,
++        5966,
++        5971,
++        5976,
++        5981,
++        5986,
++        5992,
++        5997,
++        6002,
++        6007,
++        6012,
++        6017,
++        6022,
++        6027,
++        6031,
++        6036,
++        6041,
++        6046,
++        6051,
++        6056,
++        6060,
++        6065,
++        6070,
++        6075,
++        6079,
++        6084,
++        6089,
++        6093,
++        6098,
++        6103,
++        6107,
++        6112,
++        6116,
++        6121,
++        6125,
++        6130,
++        6134,
++        6139,
++        6143,
++        6148,
++        6152,
++        6156,
++        6161,
++        6165
++    };
+diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_register.h linux.dev/drivers/atm/sangam_atm/dsl_hal_register.h
+--- linux.old/drivers/atm/sangam_atm/dsl_hal_register.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dsl_hal_register.h	2005-08-23 04:46:50.097843696 +0200
+@@ -0,0 +1,337 @@
++#ifndef ___DSL_REGISTER_DEFINES_H___
++#define ___DSL_REGISTER_DEFINES_H___ 1
++
++/*******************************************************************************
++* FILE PURPOSE:     DSL HAL H/W Registers and Constant Declarations for Sangam
++*
++********************************************************************************
++* FILE NAME:        dsl_hal_register.h
++*
++* DESCRIPTION:  
++*       Contains DSL HAL APIs for Adam2 OS functions
++*  
++*                    
++* (C) Copyright 2001-02, Texas Instruments, Inc.
++*    History
++*    Date        Version            Notes
++*    06Feb03     0.00.00            RamP   Created
++*    21Mar03     0.00.01            RamP   Changed header files for Modular 
++*                                          build framework
++*    21Mar03     0.00.02            RamP   Introduced malloc size for DSP f/w
++*    07Apr03     0.00.03            RamP   Implemented new error reporting scheme
++*                                          Changed Commenting to C style only
++*    12Apr03     0.00.04            RamP   Added Interrupt Mask defines
++*    14Apr03     0.00.05            RamP   Renamed macros for REG8, REG16 & REG32
++*    21Apr03     0.01.00            RamP   Added Interrupt source/clear registers
++*                                          Changed enum RSTATE_SHOWTIME to 5
++*    24Apr03     0.01.01            RamP   Moved the RSTATE enum to api.h
++*                                          Added olay recovery error condition
++*    14May03     0.01.02            RamP   Added defines for power computation
++*                                          Added error condition for hybrids
++*    04Jun03     0.01.03            RamP   Added enum for config flags, 
++*                                          Cleaned up AR5 register defines
++*                                          Added defines for higher data rate
++*    06Jun03     0.01.04            RamP   Added error & interrupt defines
++*    09Jun03     0.01.05            RamP   Modified enum for current config
++*                                          Added additional C-Rates defines
++*    18Jul03     0.01.06            RamP   Modified internal build flow
++*    21Aug03     0.01.07            RamP   Added constellation buffer size
++*    08Oct03     0.01.08            RamP   Added us/ds Bits n gains size
++*    12Oct03     0.01.08            RamP   Added ADSL2 Message sizes, lengths 
++*                                          and offsets for various formats
++*    29Oct03     0.01.09            RamP   Added ADSL2 Delt offsets & sizes
++*    24Nov03     0.01.10            RamP   Added bit field number, scan vector
++*    26Dec03     0.01.11            RamP   Removed the oamFeature masks to api.h
++*******************************************************************************/
++
++#include "env_def_typedefs.h"
++#ifdef INTERNAL_BUILD
++#include "dev_host_internalinterface.h"
++#endif
++#include "dev_host_interface.h"
++#include "dsl_hal_api.h"
++
++#define ADSLSS_BASE                                                     0x01000000
++#define BBIF_BASE                                                       0x02000000
++
++#define ADSLSSADR                                                       (BBIF_BASE+0x0000)
++#define ADSLSSADRMASK                                                   0xff000000
++#define WAKEUP_DSP                                            0x00000001
++
++/* Ax7 Reset Control */
++
++#define RST_CNTRL_BASE                                                  0x8611600
++#define RST_CNTRL_PRCR                                                  (RST_CNTRL_BASE + 0x00 )
++
++#define    RST_CNTRL_PRCR_GPIO                                  0x00000040
++#define    RST_CNTRL_PRCR_ADSLSS                                0x00000080
++#define    RST_CNTRL_PRCR_USB                                   0x00000100
++#define    RST_CNTRL_PRCR_SAR                                   0x00000200
++#define    RST_CNTRL_PRCR_DSP                                   0x00800000
++#define    RST_CNTRL_PRCR_EMAC1                                 0x00200000      /* EMAC1 reset */
++
++#define    RST_CNTRL_SWRCR                                      (RST_CNTRL_BASE + 0x04 )
++#define    RST_SWRCR_SWR0                                       0x00000001
++#define    RST_SWRCR_SWR1                                       0x00000002
++
++#define    RST_CNTRL_RSR                                        (TNETD53XX_RST_CNTRL_BASE + 0x08 )
++#define    RST_RSR_RSCAUSE                                      0x00000003   /* Software Reset Caused by writing to SWR1 bit */
++
++
++/* ******************************************************
++Interrupt sources on Ax7 interrupt controller.
++The reserved sources are noted.
++********************************************************* */
++
++#define INTR_CNTRL_SRC_SECOND                                   0
++#define INTR_CNTRL_SRC_EXTERNAL0                                1
++#define INTR_CNTRL_SRC_EXTERNAL1                                2
++/* reserved sources ... */
++#define INTR_CNTRL_SRC_TIMER0                                   5
++#define INTR_CNTRL_SRC_TIMER1                                   6
++#define INTR_CNTRL_SRC_UART0                                    7
++#define INTR_CNTRL_SRC_UART1                                    8
++#define INTR_CNTRL_SRC_DMA0                                     9
++#define INTR_CNTRL_SRC_DMA1                                     10
++/* reserved sources ... */
++#define INTR_CNTRL_SRC_SAR                                      15
++/* reserved sources ... */
++#define INTR_CNTRL_SRC_EMAC0                                    19
++/* reserved sources ... */
++#define INTR_CNTRL_SRC_VLYNQ0                                   21
++#define INTR_CNTRL_SRC_CODEC_WAKE                               22
++/* reserved sources ... */
++#define INTR_CNTRL_SRC_USB                                      24
++#define INTR_CNTRL_SRC_VLYNQ1                                   25
++/* reserved sources ... */
++#define INTR_CNTRL_SRC_EMAC1                                    28
++#define INTR_CNTRL_SRC_I2C                                      29
++#define INTR_CNTRL_SRC_DMA2                                     30
++#define INTR_CNTRL_SRC_DMA3                                     31
++/* reserved sources ... */
++#define INTR_CNTRL_SRC_VDMA_RX                                  37
++#define INTR_CNTRL_SRC_VDMA_TX                                  38
++#define INTR_CNTRL_SRC_ADSLSS                                   39
++
++#ifndef K0BASE 
++#define K0BASE                                                          0x80000000
++#endif
++
++#ifndef K1BASE 
++#define K1BASE                                                          0xA0000000
++#endif
++
++#ifndef PHYS_ADDR
++#define PHYS_ADDR(X)                                                    ((X) & 0X1FFFFFFF)
++#endif
++
++#ifndef PHYS_TO_K0
++#define PHYS_TO_K0(X)                                                   (PHYS_ADDR(X)|K0BASE)
++#endif
++
++#ifndef PHYS_TO_K1
++#define PHYS_TO_K1(X)                                                   (PHYS_ADDR(X)|K1BASE)
++#endif
++
++#ifndef DSLHAL_REG8
++#define DSLHAL_REG8( addr )                                          (*(volatile unsigned short *) PHYS_TO_K1(addr))
++#endif
++
++#ifndef DSLHAL_REG16
++#define DSLHAL_REG16( addr )                                         (*(volatile unsigned short *)PHYS_TO_K1(addr))
++#endif
++
++#ifndef DSLHAL_REG32
++#define DSLHAL_REG32( addr )                                         (*(volatile unsigned int *)PHYS_TO_K1(addr))
++#endif
++
++#ifndef NULL
++#define NULL    0
++#endif
++
++#ifndef TRUE
++#define TRUE    (1==1)
++#endif
++
++#ifndef FALSE
++#define FALSE   (1==2)
++#endif
++
++/*******************************************************************************
++* Type Defines for Library
++********************************************************************************/
++typedef unsigned int size_t;
++
++#define TIDSL_HW_CREATED                                                0x00000001
++#define TIDSL_HW_OPENED                                                 0x00000002
++#define TIDSL_HW_STARTED                                                0x00000004
++#define TIDSL_OS_INITIALIZED                                            0x00000008
++
++/* Data Pump CRATES Table Defines */
++#define SIZE_OF_CRATES1_TABLE                                           120
++#define CRATES1_BF_LS0                                                  7
++#define CRATES1_BI_LS0                                                  17
++#define CRATES1_BF_AS0                                                  0
++#define CRATES1_BI_AS0                                                  10
++#define CRATES1_BF_DSRS                                                 20
++#define CRATES1_BI_DSRS                                                 21
++#define CRATES1_BFI_DSS                                                 22
++#define CRATES1_BFI_DSI                                                 23
++#define CRATES1_BF_USRS                                                 25
++#define CRATES1_BI_USRS                                                 26
++#define CRATES1_BFI_USS                                                 27
++#define CRATES1_BFI_USI                                                 28
++
++#define FAST_PATH                                                       0
++#define INTERLEAVED_PATH                                                1
++
++#define LINE_NOT_CONNECTED                                              0
++#define LINE_CONNECTED                                                  1
++#define LINE_DISCONNECTED                                               2 
++#define LINE_NOT_TO_CONNECT                                             3 
++
++#define MAXSECTIONS                                                     125
++
++/*****************************************************************************************
++ * Localstructure declarations
++ *
++ ****************************************************************************************/
++enum
++{
++  DSLHAL_ERROR_NO_ERRORS,                /* 00 */
++  DSLHAL_ERROR_UNRESET_ADSLSS,           /* 01 */
++  DSLHAL_ERROR_RESET_ADSLSS,             /* 02 */
++  DSLHAL_ERROR_UNRESET_DSP,              /* 03 */ 
++  DSLHAL_ERROR_RESET_DSP,                /* 04 */    
++  DSLHAL_ERROR_NO_FIRMWARE_IMAGE,        /* 05 */
++  DSLHAL_ERROR_MALLOC,                   /* 06 */
++  DSLHAL_ERROR_FIRMWARE_MALLOC,          /* 07 */
++  DSLHAL_ERROR_DIAG_MALLOC,              /* 08 */
++  DSLHAL_ERROR_OVERLAY_MALLOC,           /* 09 */
++  DSLHAL_ERROR_CODE_DOWNLOAD,            /* 10 */
++  DSLHAL_ERROR_DIAGCODE_DOWNLOAD,        /* 11 */
++  DSLHAL_ERROR_BLOCK_READ,               /* 12 */  
++  DSLHAL_ERROR_BLOCK_WRITE,              /* 13 */  
++  DSLHAL_ERROR_MAILBOX_READ,             /* 14 */  
++  DSLHAL_ERROR_MAILBOX_WRITE,            /* 15 */
++  DSLHAL_ERROR_MAILBOX_NOMAIL,           /* 16 */
++  DSLHAL_ERROR_MAILBOX_OVERFLOW,         /* 17 */
++  DSLHAL_ERROR_INVALID_PARAM,            /* 18 */
++  DSLHAL_ERROR_ADDRESS_TRANSLATE,        /* 19 */
++  DSLHAL_ERROR_FIRMWARE_CRC,             /* 20 */
++  DSLHAL_ERROR_FIRMWARE_OFFSET,          /* 21 */
++  DSLHAL_ERROR_CONFIG_API_FAILURE,       /* 22 */ 
++  DSLHAL_ERROR_EOCREG_API_FAILURE,       /* 23 */
++  DSLHAL_ERROR_VERSION_API_FAILURE,      /* 24 */
++  DSLHAL_ERROR_STATS_API_FAILURE,        /* 25 */
++  DSLHAL_ERROR_MARGIN_API_FAILURE,       /* 26 */
++  DSLHAL_ERROR_CTRL_API_FAILURE,         /* 27 */
++  DSLHAL_ERROR_HYBRID_API_FAILURE,       /* 28 */
++  DSLHAL_ERROR_MODEMENV_API_FAILURE,     /* 29 */
++  DSLHAL_ERROR_INTERRUPT_FAILURE,        /* 30 */
++  DSLHAL_ERROR_INTERNAL_API_FAILURE,     /* 31 */
++  DSLHAL_ERROR_DIGIDIAG_FAILURE,         /* 32 */
++  DSLHAL_ERROR_TONETEST_FAILURE,         /* 33 */
++  DSLHAL_ERROR_NOISETEST_FAILURE,        /* 34 */
++  DSLHAL_ERROR_MODEMSTATE,               /* 35 */
++  DSLHAL_ERROR_OVERLAY_CORRUPTED         /* 36 */
++};
++ 
++enum 
++{
++  CONFIG_FLAG_NOFLAG,                    /* 00 */
++  CONFIG_FLAG_TRELLIS,                   /* 01 */
++  CONFIG_FLAG_EC,                        /* 02 */
++  CONFIG_FLAG_RS                         /* 03 */
++};
++
++#define USE_EMIF_REV    0
++#define USE_CVR_REV     1
++#define TNETD53XX_MAXLOOP       10000
++#define REVERB          0
++#define MEDLEY          1
++#define NONINTENSE      0
++#define slavespace0 0xa1000000
++
++#define MASK_MAILBOX_INTERRUPTS 0x00000001
++#define MASK_BITFIELD_INTERRUPTS 0x00000002
++#define MASK_HEARTBEAT_INTERRUPTS 0x00000004
++#define DSP_INTERRUPT_SOURCE_REGISTER  0x020007A0
++#define DSP_INTERRUPT_CLEAR_REGISTER   0x020007A4
++
++#define DIGITAL_DIAG_MEMSIZE 1048576
++#define CRC32_QUOTIENT 0x04c11db7
++#define DSP_FIRMWARE_MALLOC_SIZE 0x7ffff
++#define DSP_CONSTELLATION_BUFFER_SIZE 1024*4
++#define LOG43125 9303
++#define US_NOMINAL_POWER (-38)
++#define US_BNG_LENGTH 32
++#define DS_BNG_LENGTH 256
++#define NUMBER_OF_BITFIELDS 4
++#define BITFIELD_SCAN 0x80000000
++
++/* ADSL Message offsets from Host Interface Pointer */
++
++/* ADSL2 Messages Index and Length defines */
++
++#define CMSGFMT_INDEX      0
++#define CMSGPCB_INDEX      1
++#define RMSGFMT_INDEX      2
++#define RMSGPCB_INDEX      3
++#define RMSG1LD_INDEX     13
++#define RMSG2LD_INDEX     14
++#define RMSG3LD_INDEX     15
++#define RMSG4LD_INDEX     16
++#define RMSG5LD_INDEX     17
++#define RMSG6LD_INDEX     18
++#define RMSG7LD_INDEX     19
++#define RMSG8LD_INDEX     20
++#define RMSG9LD_INDEX     21
++#define CMSG1LD_INDEX     22
++#define CMSG2LD_INDEX     23
++#define CMSG3LD_INDEX     24
++#define CMSG4LD_INDEX     25
++#define CMSG5LD_INDEX     26
++#define CMSGPCB2_INDEX    28
++#define CMSGPCB2L_INDEX   29
++#define RMSGFMT2_INDEX    30
++#define RMSGPCB2L_INDEX   31
++#define CMSG1ADSL2_INDEX  32
++#define RMSG1ADSL2_INDEX  33
++#define CMSG2ADSL2_INDEX  34
++#define RMSG2ADSL2_INDEX  35
++#define CPARAMS_INDEX     36
++#define RPARAMS_INDEX     37
++
++/* ADSL2 Message Sizes */
++
++#define CMSGFMT_SIZE       2
++#define RMSGFMT_SIZE       2
++#define CMSGPCB_SIZE       2
++#define CMSGPCB2_SIZE      6    /* Annex A with Blackout */
++#define CMSGPCB2L_SIZE    10    /* Annex B with Blackout */
++#define RMSGPCB_SIZE      36
++#define RMSG1LD_SIZE      16
++#define RMSGxLD_SIZE     258
++#define CMSG1LD_SIZE      16
++#define CMSG2LD_SIZE     130
++#define CMSG3LD_SIZE      66
++#define CMSG4LD_SIZE      34
++#define CMSG5LD_SIZE      34
++#define CMSG1ADSL2_SIZE   24   
++#define RMSG1ADSL2_SIZE    4
++#define CMSG2ADSL2_SIZE    4
++#define RMSG2ADSL2_SIZE   32
++#define CPARAMS_SIZE     136 
++#define RPARAMS_SIZE     808
++
++/* ADSL2 Plus Message Sizes (if Different from ADSL2) */
++
++#define RMSGPCB_P_SIZE     68
++#define CMSG1ADSL2P_SIZE   40 /* With Blackout */
++#define CPARAMS_PA_SIZE   168 
++#define RPARAMS_PA_SIZE  2088
++#define CPARAMS_PB_SIZE   296
++#define RPARAMS_PB_SIZE  2088
++
++#endif /* pairs #ifndef ___DSL_REGISTER_DEFINES_H___ */
+diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_support.c linux.dev/drivers/atm/sangam_atm/dsl_hal_support.c
+--- linux.old/drivers/atm/sangam_atm/dsl_hal_support.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dsl_hal_support.c	2005-08-23 04:46:50.100843240 +0200
+@@ -0,0 +1,2788 @@
++/*******************************************************************************
++* FILE PURPOSE:     DSL Driver API functions for Sangam
++*********************************************************************************
++* FILE NAME:        dsl_hal_support.c
++*
++* DESCRIPTION:  
++*       Contains DSL HAL APIs for Modem Control
++*  
++*                    
++* (C) Copyright 2001-02, Texas Instruments, Inc.
++*    History
++*    Date        Version            Notes
++*    06Feb03     0.00.00            RamP   Created
++*    21Mar03     0.00.01            RamP   Inserted byteswap functions
++*    07Apr03     0.00.02            RamP   Implemented new error reporting scheme
++*                                          Changed Commenting to C style only
++*    12Apr03     0.00.03            RamP   Added function to set Interrupt Bit
++*                                          Masks for bitfield & Mailboxes
++*    14Apr03     0.00.04            RamP   Added function to process modem state
++*                                          bit fields; renamed REG32 macros
++*                                          Changed interrupt bit field settings
++*    15Apr03     0.00.05            RamP   Fixed exit condition on dslShutdown
++*    21Apr03     0.01.00            RamP   Fixed dslShutdown function & changed
++*                                          loop counter for overlay byteswaps
++*                (Alpha)                   Added cache writeback for overlays
++*                                          Added function acknowledgeInterrupt
++*    22Apr03     0.01.01            RamP   Moved acknowledgeInterrupt into api
++*    24Apr03     0.01.02            RamP   Added function to compare crc32 with
++*                                          pre-computed value as a recovery 
++*                                          scheme for corrupt overlay pages
++*    28Apr03     0.01.03            RamP   Fixed a parameter in crc32 fxn call
++*    05May03     0.01.04            RamP   Fixed Message structure access in
++*                                          writeHostMailbox function
++*    14May03     0.01.05            RamP   Lookup to netService of dsp version
++*                (alpha ++)                to determine pots/isdn service
++*    21May03     0.01.06            RamP   Added support for CO profiles
++*    29May03     0.01.07            RamP   Added critical section tabs for block
++*                                          read/write operations
++*                                          Added functions to reload overlay pages
++*                                          and CO Profiles
++*    04Jun03     0.01.08            RamP   Added state transition timing counters
++*    06Jun03     0.01.09            RamP   Added Interrupt source parsing function
++*                                          Interrupt masking for heartbeat added
++*    09Jun03     0.01.10            RamP   Modified modem state bit field processing
++*                                          for structure changes in ITIDSLHW
++*                                          fixed problem in free memory for CO prof
++*    18Jul03     0.01.11            RamP   Optimized free memory for CO profiles &
++*                                          overlay pages in the supporting APIs  
++*    28Jul03     0.02.00            RamP   Modified the process bitfield functn
++*                                          for LED & Application State report
++*    21Aug03     0.03.00            RamP   Added logic to allocate & communicate
++*                                          memory for constellation buffer display
++*    29Sep03     0.03.01            RamP   Added API switch calls to advcfg module
++*                                          to abstract them from the API module
++*    12Oct03     0.03.02            RamP   Added API to gather ADSL2 Messages
++*    14Oct03     0.03.03            RamP   Added function to read CMsgsRA
++*    23Oct03     0.03.04            RamP   Changed train history index to circular 
++*                                          buffer upon rollover
++*    29Oct03     0.03.05            RamP   Added Adsl2 Delt Message Parsing 
++*    12Nov03     0.03.06            RamP   Fixed endianness issues with 
++*                                          Constellation Display
++*    14Nov03     0.03.07            RamP   Added function to gather CRates1/RRates1
++*                                          before they get overwritten by CRatesRA
++*    19Nov03     0.03.08            JohnP  Revised dslhal_support_aocBitSwapProcessing to
++*                                          prevent duplicate ATU-R bitswaps going to ACT
++*    24Nov03     0.03.09            RamP   Implemented detailed State Tracking through
++*                                          Modem State bit fields for ADSL/2
++*    12Dec03     0.03.10            RamP   Tokenized advanced configuration code
++*    12Dec03     0.03.11            RamP   Added state reset upon IDLE
++*    19Dec03     0.03.12            RamP   Added static adsl2 byteswap function for
++*                                          handling pointer to pointer cases 
++*                                          Changed adsl2 messages to correct pointer to 
++*                                          pointer dereferencing problems in some OS
++*    26Dec03     0.03.13            RamP   Setting Current Address for Constellation
++*                                          buffer in addition to start address
++*                                          Added additional check to overlay page malloc
++*******************************************************************************/
++#include "dsl_hal_register.h"
++#include "dsl_hal_support.h"
++
++static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits);
++
++/******************************************************************************************
++* FUNCTION NAME:     dslhal_support_unresetDslSubsystem
++*
++*******************************************************************************************
++* DESCRIPTION: This function unreset Dsl Subsystem
++*
++* INPUT:  None
++*
++* RETURN: 0 if Pass; 1 if Fail
++*
++*****************************************************************************************/
++int  dslhal_support_unresetDslSubsystem(void)
++{
++  dprintf(4," dslhal_support_unresetDslSubsystem()\n");
++  /* Put ADSLSS in to reset */
++  DSLHAL_REG32(0xa8611a10) = 0x1;
++  shim_osClockWait(64);
++  dprintf(5,"Selected APLL Reg \n");
++
++  DSLHAL_REG32(0xa8610a90) = 0x4;
++  shim_osClockWait(64);
++  dprintf(5,"Enable Analog PLL \n"); 
++
++  DSLHAL_REG32(0xa8610a90) = 0x77fe;
++  shim_osClockWait(64);
++  dprintf(5,"Set PLL for DSP\n");
++
++  /*  DSLHAL_REG32(0xa8611600) = 0x007f1bdf;*/
++  DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_ADSLSS;
++  shim_osClockWait(64);
++  dprintf(5,"Brought ADSLSS out of Reset \n");
++
++  DSLHAL_REG32(0xa861090c) &= ~((1<<20)|(1<<21)|(1<<22)|(1<<23)|(1<<24)|(1<<25));
++  shim_osClockWait(64);
++  dprintf(5,"Configured GPIO 20-25 for McBSP \n"); 
++
++  /*DSLHAL_REG32(0xa8611600)           |= RST_CNTRL_PRCR_ADSLSS;*/
++
++  
++  /*  DSLHAL_REG32(0xa8611a04) = 0x00000001; 
++      shim_osClockWait(64); */
++
++  dprintf(4," dslhal_support_unresetDslSubsystem done\n");
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++
++/******************************************************************************************
++* FUNCTION NAME:     dslhal_support_resetDslSubsystem
++*
++*******************************************************************************************
++* DESCRIPTION: This function unreset Dsl Subsystem
++*
++* INPUT:  None
++*
++* RETURN: 0 if Pass; 1 if Fail
++*
++*****************************************************************************************/
++int  dslhal_support_resetDslSubsystem(void)
++{
++  dprintf(4, "dslhal_support_resetDslSubsystem \n");
++  /* Put ADSLSS into reset */
++  DSLHAL_REG32(0xa8611600) &= ~RST_CNTRL_PRCR_ADSLSS;
++  shim_osClockWait(64);
++  /*  DSLHAL_REG32(0xa8611a04) = 0x00000000;
++      shim_osClockWait(64); */
++  dprintf(4, "dslhal_support_resetDslSubsystem Done \n");
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_unresetDsp()
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
++*
++* INPUT:  None
++*
++* RETURN: 0  --successful.
++*         1  --failed
++*
++*****************************************************************************************/
++int dslhal_support_unresetDsp(void)
++{
++#ifdef PRE_SILICON
++  /* unsigned char value; */
++  int rc;
++
++  rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_SRC_ADDR);
++  if(rc==DSLHAL_ERROR_ADDRESS_TRANSLATE)
++    {
++    dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
++    return DSLHAL_ERROR_ADDRESS_TRANSLATE;
++    }
++  dprintf(5,"MDMA SRC: %08x\n", rc);
++  DSLHAL_REG32(rc) = 0x80000001;
++  rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_DST_ADDR);
++  if(rc==DSLHAL_ERROR_ADDRESS_TRANSLATE)
++    {
++    dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
++    return DSLHAL_ERROR_ADDRESS_TRANSLATE;
++    }
++  dprintf(5,"MDMA DST: %08x\n", rc);
++  DSLHAL_REG32(rc) = 0x02090001;
++  rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_CTL_ADDR);
++  if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
++    {
++    dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
++    return DSLHAL_ERROR_ADDRESS_TRANSLATE;
++    }
++  dprintf(5,"MDMA CTL: %08x\n", rc);
++  DSLHAL_REG32(rc) = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
++                         DEV_MDMA_BURST1 | (1 << DEV_MDMA_LEN_SHF));
++  /* statusMask = 0x00000010;*/
++#else
++  dprintf(4, "dslhal_support_unresetDsp()\n");
++  
++  /* Bring the DSP core out of reset */
++  /* DSLHAL_REG32(0xa8611600) = 0x00ff1bdf; */
++  DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_DSP;
++  shim_osClockWait(64);
++  dprintf(5,"Brought DSP out of Reset \n");
++  dprintf(6,"Current Contents of PRCR: 0x%x\n",(unsigned int)DSLHAL_REG32(0xa8611600));
++  /* DSLHAL_REG32(0xa8611a0c) = 0x00000007;
++     shim_osClockWait(64); */
++#endif  
++
++  dprintf(4, "dslhal_support_unresetDsp() done\n");
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_resetDsp()
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction takes ax5 daugter board into reset.
++*
++* INPUT:  None
++*
++* RETURN: 0  --successful.
++*         1  --failed
++*
++*****************************************************************************************/
++int dslhal_support_resetDsp(void)
++{
++  dprintf(4, "dslhal_support_resetDsp \n");
++  /* Put ADSLSS into reset */
++  DSLHAL_REG32(0xa8611600) &= ~RST_CNTRL_PRCR_DSP;
++  shim_osClockWait(64);
++  dprintf(4, "dslhal_support_resetDsp Done \n");
++  return DSLHAL_ERROR_NO_ERRORS;
++}  
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_hostDspAddressTranslate()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Maps ax5 daugter card dsp memory address to avalanche memory space
++*
++* Input: unsigned int addr,  dsp memory address.
++*
++* Return: >=0, unsigned int, mapped Avalanche address(VBUS address). 
++*         -1,  mapping failed
++*         
++*
++********************************************************************************************/
++/* static unsigned int bbifmap0,bbifmap1; */
++
++unsigned int dslhal_support_hostDspAddressTranslate( unsigned int addr )
++{
++  unsigned int addrMap;
++  /* This function should just be used to move the memory window of the ADSLSS */
++  dprintf(5, "dslhal_support_hostDspAddressTranslate()\n");
++  
++  /*  select vbus to xbus memory  */
++  /*  addrMap = addr & 0xff000000; */
++  addrMap = addr & ADSLSSADRMASK;
++  
++  DSLHAL_REG32(ADSLSSADR) = addrMap;
++  
++  dprintf(6, "dslhal_support_hostDspAddressTranslate() done\n");
++#ifdef PRE_SILICON
++  return ((ADSLSS_BASE | (~ADSLSSADRMASK & addr))+ 0x00000100);
++  /* Added 0x100 for Pre-Silicon VLNQ offset.. to be removed for Silicon */
++#else
++  return ((ADSLSS_BASE | (~ADSLSSADRMASK & addr)));
++  /* Added 0x100 for Pre-Silicon VLNQ offset.. to be removed for Silicon */
++#endif
++
++}
++
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_blockWrite
++*
++*******************************************************************************************
++* DESCRIPTION: This rouin simulates DSP memory write as done in ax5 pci nic card 
++*
++* INPUT:  void *buffer, data need to written
++*         void *adde,   memory address to be written
++*         size_t count, number of bytes to be written
++*
++* RETURN:  0 --succeeded
++*          1 --Failed
++*
++*****************************************************************************************/
++
++int dslhal_support_blockWrite(void *buffer, void *addr, size_t count) 
++{
++  int rc, byteCnt=0;
++  unsigned char* ptr;
++  union 
++    {
++    unsigned char *cptr;
++    short *sptr;
++    int *iptr;
++    } src;
++  union 
++    {
++    int anint;                   /* DSP location */
++    unsigned char *cptr;         /* to avoid casts */
++    } dst;
++  union
++    {
++    unsigned int anint;
++    unsigned char byte[4];
++    }data,dword,sword;
++        
++  /* Enter Critical Section */
++  shim_osCriticalEnter();
++
++  dprintf(6, "dslhal_support_blockWrite\n");
++  
++  dprintf(6,"addr=0x%X, length=0x%X, buffer=0x%X\n", (unsigned int) addr, (unsigned int) count, (unsigned int)buffer); 
++  
++  src.cptr = (unsigned char*) buffer;      /* local buffer */
++  dst.cptr = addr;        /* DSP memory location */
++  
++  /*Maps address first*/
++  rc=dslhal_support_hostDspAddressTranslate((unsigned int)addr);
++  dprintf(5, "NewAddr: %08x\n", rc);
++  if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
++    {
++    dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
++    return  DSLHAL_ERROR_ADDRESS_TRANSLATE;
++    }
++
++  dst.cptr=(unsigned char *)rc;
++  
++  /* check wether address is at 32bits boundary */
++  
++  if ((dst.anint & 0x3) && count)
++    {
++    sword.anint = *(unsigned int*)((unsigned int)src.cptr & 0xfffffffc);
++    dword.anint = DSLHAL_REG32((unsigned int)dst.cptr & 0xfffffffc);
++    sword.anint = (unsigned int) dslhal_support_byteSwap32(sword.anint);
++    dword.anint = (unsigned int) dslhal_support_byteSwap32(dword.anint);
++    ptr = (unsigned char *)((unsigned int)dst.cptr & 0xfffffffc);
++
++    if((dst.anint & 3) ==3)     /* last byte of a dword */
++      {
++      dword.byte[3] = sword.byte[3];
++      dst.anint++;            /* bump the address by one */
++      byteCnt++;
++      count--;  
++      }
++    
++    if((dst.anint & 3) ==1)     /* second byte */
++      {
++        if(count>3)
++          {
++            dword.byte[3] = sword.byte[3];
++            dst.anint++;
++            count--;
++            byteCnt++;
++          }
++        if(count>2)
++          {
++            dword.byte[2] = sword.byte[2];
++            dst.anint++;
++            count--;
++            byteCnt++;
++          }
++        if(count)
++          {
++            dword.byte[1] = sword.byte[1];
++            dst.anint++;
++            count--;
++            byteCnt++;
++          }
++      }
++    
++    if((dst.anint & 3) && (count >1))
++      {
++      dword.byte[2] = sword.byte[2];
++      dword.byte[3] = sword.byte[3];
++      byteCnt+=2;
++      dst.anint += 2;         /* bump the address by two */
++      count -= 2;             /* decrement the byte count by two */
++      }
++    
++    if((dst.anint & 3) && (count==1))
++      {
++      dword.byte[2] = sword.byte[2];
++      dst.anint++;
++      byteCnt++;
++      count--;
++      }
++    src.cptr = (char *)((unsigned int)src.cptr & 0xfffffffc); /* fix 032802 */
++    dword.anint = dslhal_support_byteSwap32(dword.anint); 
++    DSLHAL_REG32((unsigned int)ptr) = dword.anint;
++    ptr = src.cptr;
++    for(rc=0;rc<count;rc++)
++      {
++        *ptr = *(ptr+byteCnt);
++        ptr++;
++      }
++    }
++  
++  /* the dst pointer should now be on a 32-bit boundary   */
++
++  while (count > 3) 
++    {
++     DSLHAL_REG32((unsigned int)dst.cptr) = dslhal_support_byteSwap32(*src.iptr);
++     src.iptr++;                  /* bump the data pointer by four */
++     dst.anint += 4;              /* bump the address by four */
++     count -= 4;                  /* decrement the byte count by four */
++     }
++  
++  /* write remaining bytes */
++  if(count)
++    {
++    int i;
++    
++    data.anint= DSLHAL_REG32((unsigned int)dst.cptr);
++    data.anint=dslhal_support_byteSwap32(data.anint);
++    for (i=0; i< count; i++)
++      {
++        data.byte[i]=*(src.cptr+i);             
++      }
++    data.anint=dslhal_support_byteSwap32(data.anint);
++    DSLHAL_REG32((unsigned int)dst.cptr) = data.anint;
++    src.cptr +=count;
++    dst.anint +=count;
++    count=0;
++    }
++  dprintf(6, "dslhal_support_blockWrite done\n");
++  /* Exit Critical Section */
++  shim_osCriticalExit();
++  return DSLHAL_ERROR_NO_ERRORS;
++}   /* end of dslhal_support_blockWrite() */
++
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_blockRead
++*
++*********************************************************************************************
++* DESCRIPTION: This rouin simulates DSP memory read as done in ax5 pci nic card
++*
++* INPUT:  void *addr,   memory address to be read
++*         void *buffer, dat buffer to be filled with from memmory
++*         size_t count, number of bytes to be written
++*
++* RETURN:  0 --succeeded
++*          1 --Failed
++*
++*****************************************************************************************/
++
++int dslhal_support_blockRead(void *addr, void *buffer, size_t count) 
++{
++    int rc;
++    union 
++        {
++        int anint;          /* DSP location */
++        char *cptr;         /* to avoid casts */
++        } src;
++    union 
++        {
++        char byte[4];
++        int anint;          /* DSP data */
++        } data;
++    union 
++        {
++        char *cptr;
++        int *iptr;
++        } dst;
++
++    /* Enter Critical Section */
++    shim_osCriticalEnter();
++
++    dprintf(6,"dslhal_support_blockRead\n");
++
++  
++    src.cptr = addr;        /* DSP memory location */
++    dst.cptr = buffer;      /* local buffer */
++
++    dprintf(6, "Read addr=0x%X, size=0x%X\n", (unsigned int)addr, count);
++
++
++    /*Maps address first*/
++    rc=dslhal_support_hostDspAddressTranslate((unsigned int)addr);
++    if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
++      {
++      dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
++      return DSLHAL_ERROR_ADDRESS_TRANSLATE;
++      }
++
++    src.cptr=(unsigned char *)rc;
++
++    /**********************************************
++    *  if the source is NOT on a 32-bit boundary  *
++    *  then we read the full word                 *
++    *  and ignore the first part of it            *
++    **********************************************/
++
++    if ((src.anint & 3) && count) 
++        {
++                unsigned int anword;
++
++                anword = DSLHAL_REG32((unsigned int)src.cptr & 0xfffffffc);
++                data.anint = dslhal_support_byteSwap32(anword);
++
++        /************************************
++        *  there is no need for case 0      *
++        *  notice that there are no breaks  *
++        *  each falls through to the next   *
++        ************************************/
++
++        switch (src.anint & 3) 
++                {
++            case 1:
++                /* use only byte[1-3] */
++                *(dst.cptr++) = data.byte[1];
++                src.anint++;
++                count--;
++            case 2:
++                /* use byte[2-3] */
++                if (count) 
++                                {
++                    *(dst.cptr++) = data.byte[2];
++                    src.anint++;
++                    count--;
++                                }
++            case 3:
++                /* use byte[3] */
++                if (count) 
++                                {
++                    *(dst.cptr++) = data.byte[3];
++                    src.anint++;
++                    count--;
++                                }
++                }
++        }
++
++    /* the src pointer should now be on a 32-bit boundary */
++    while (count > 3) 
++        {
++                unsigned int anword;
++        
++                anword=DSLHAL_REG32((unsigned int)src.cptr);
++                
++                *dst.iptr = dslhal_support_byteSwap32(anword);
++        src.anint += 4;         /* bump the address by four */
++        dst.iptr++;             /* bump the data pointer by four */
++        count -= 4;             /* decrement the byte count by four */
++        }
++
++    /*******************************
++    *  if there's any count left   *
++    *  then we read the next word  *
++    *  and ignore the end of it    *
++    *******************************/
++    if (count) 
++        {
++                unsigned int anword;
++
++                anword= DSLHAL_REG32((unsigned int)src.cptr);
++                data.anint = dslhal_support_byteSwap32(anword);
++
++        /************************************
++        *  there is no need for case 0      *
++        *  notice that there are no breaks  *
++        *  each falls through to the next   *
++        ************************************/
++        switch (count) 
++                {
++            case 1:
++                /* use byte[0] */
++                *(dst.cptr++) = data.byte[0];
++                src.anint++;
++                count--;
++                break;
++            case 2:
++                /* use byte[0-1] */
++                *(dst.cptr++) = data.byte[0];
++                *(dst.cptr++) = data.byte[1];
++                src.anint +=2;
++                count -= 2;
++                break;
++            case 3:
++                /* use only byte[0-2] */
++                *(dst.cptr++) = data.byte[0];
++                *(dst.cptr++) = data.byte[1];
++                *(dst.cptr++) = data.byte[2];
++                src.anint +=3;
++                count -= 3;
++                break;
++                }
++        }
++  /* Exit Critical Section */
++  shim_osCriticalExit();
++
++  return DSLHAL_ERROR_NO_ERRORS;
++  
++}   /* end of dslhal_support_blockRead() */
++
++
++/********************************************************************************************
++* FUNCTION NAME:    dslhal_support_readDspMailbox
++*
++*********************************************************************************************
++* DESCRIPTION: Reads a message from the mailbox
++*
++* ARGUMENTS:   int *pcmd           Pointer to command read
++*
++* RETURNS:     0 if successful
++*              1 if no mail
++*              NZ otherwise
++*
++*****************************************************************************************/
++
++int dslhal_support_readDspMailbox(tidsl_t *ptidsl, int *pcmd, int *ptag, int *pprm1, int *pprm2) 
++{
++  int rc;
++  int cmd;
++  int tag;
++  int prm1;
++  int prm2;
++  unsigned char dspOutInx;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  DEV_HOST_mailboxControl_t mailboxControl;
++  DEV_HOST_dspHostMsg_t dspMailboxMsg[DEV_HOST_DSPQUEUE_LENGTH];
++  
++  dprintf(6,"dslhal_support_readDspMailbox\n");
++  
++  /* get the DSP main pointer */
++
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  /* Read in the command/response buffer */
++  dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
++  
++ 
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, 
++                               &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++  /* Change the endianness of the Mailbox Pointer */
++  mailboxControl.dspMsgBuf_p = (DEV_HOST_dspHostMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.dspMsgBuf_p);
++
++  rc = dslhal_support_blockRead((PVOID)mailboxControl.dspMsgBuf_p, 
++                                     &dspMailboxMsg, (sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_DSPQUEUE_LENGTH));
++  
++  if (rc) 
++    return DSLHAL_ERROR_BLOCK_READ;
++  /* Extract the command/response message index */
++  mailboxControl.hostInInx &= 7;   
++  mailboxControl.hostOutInx &= 7;
++  mailboxControl.dspOutInx &= 7;
++  mailboxControl.dspInInx &= 7;
++  
++  
++  /* check for messages in the mailbox */
++  
++  if (mailboxControl.dspOutInx == mailboxControl.dspInInx) 
++    {
++    return DSLHAL_ERROR_MAILBOX_NOMAIL;
++    /* no messages to read */ 
++    }
++  
++  /* use bDRESPOutInx as index to DRESPMsgBuf */
++  
++  cmd = dspMailboxMsg[mailboxControl.dspOutInx].cmd;
++  tag = dspMailboxMsg[mailboxControl.dspOutInx].tag;
++  prm1= dspMailboxMsg[mailboxControl.dspOutInx].param1;
++  prm2= dspMailboxMsg[mailboxControl.dspOutInx].param2;
++  
++  mailboxControl.dspOutInx++;      /* increment count */ 
++  mailboxControl.dspOutInx &= 7;   /* only two bits */
++  
++  dspOutInx = mailboxControl.dspOutInx;
++  
++  /* Read in the command response buffer again to take care of changes */
++  mailboxControl.dspOutInx = dspOutInx;
++  rc = dslhal_support_blockWrite(&mailboxControl.dspOutInx, 
++                                      &dspOamSharedInterface.dspHostMailboxControl_p->dspOutInx, sizeof(BYTE));
++  
++  if (rc) 
++    return DSLHAL_ERROR_BLOCK_WRITE;
++  
++  /* Is the input parameter address non-zero*/
++  
++  if (pcmd)
++    {
++    *pcmd = cmd;
++    }
++  if (ptag) 
++    {
++    *ptag = tag;
++    }
++  if (pprm1)
++    {
++    *pprm1 = prm1;
++    }
++  if (pprm2)
++    {
++    *pprm2 = prm2;
++    }
++ 
++  dprintf(6,"dslhal_support_readDspMailbox done\n");
++  dprintf(6,"cmd=%d, tag=%d\n", cmd, tag);
++  dprintf(6,"dslhal_support_readDspMailbox:cmd: 0x%x, tag=%d\n", cmd, tag);
++  return DSLHAL_ERROR_NO_ERRORS;
++  
++} /* end of dslhal_support_readDspMailbox() */
++
++/*******************************************************************************************
++* FUNCTION NAME:    dslhal_support_writeHostMailbox
++*
++********************************************************************************************
++* DESCRIPTION: Send a message to a mailbox
++*
++* ARGUMENTS:   int cmd             command to write
++*              int tag             tag (currently unused)
++*              int p1              parameter 1 (currently unused)
++*              int p2              parameter 2 (currently unused)
++*
++* RETURNS:     0 if successful
++*              NZ otherwise
++*
++*******************************************************************************************/
++
++int dslhal_support_writeHostMailbox(tidsl_t *ptidsl, int cmd, int tag, int p1, int p2) 
++{
++  int rc;
++  int index;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  DEV_HOST_mailboxControl_t mailboxControl;
++  DEV_HOST_dspHostMsg_t hostMailboxMsg[DEV_HOST_HOSTQUEUE_LENGTH];
++  unsigned char hostInInx;
++  
++  dprintf(6,"dslhal_support_writeHostMailbox:cmd: 0x%x, tag=%d\n", cmd, tag);
++  
++  dprintf(6,"cmd=%d, tag=%d\n", cmd, tag);  
++  
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++  
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  /* Read in the command/response buffer */
++  dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
++  
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, 
++                                &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  /* Change the endianness of the Mailbox Control Pointer */
++  mailboxControl.hostMsgBuf_p = (DEV_HOST_dspHostMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.hostMsgBuf_p);
++  rc = dslhal_support_blockRead((PVOID)mailboxControl.hostMsgBuf_p, 
++                                &hostMailboxMsg, (sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_HOSTQUEUE_LENGTH));
++  
++  if (rc) 
++    return DSLHAL_ERROR_BLOCK_READ;
++  /* Extract the command/response message index */ 
++  mailboxControl.hostInInx &= 7;       
++  mailboxControl.hostOutInx &= 7;
++  mailboxControl.dspOutInx &= 7;
++  mailboxControl.dspInInx &= 7;
++  
++  /* make sure there's room in the mailbox */
++  
++  index = mailboxControl.hostInInx;
++  mailboxControl.hostInInx++;
++  mailboxControl.hostInInx &= 7;  
++  hostInInx = mailboxControl.hostInInx;
++  if (mailboxControl.hostInInx == mailboxControl.hostOutInx) 
++    {
++      /* mailbox is full */ 
++      return DSLHAL_ERROR_MAILBOX_OVERFLOW;
++    }
++  
++  /* use bOCMDInInx as index to OCMDMsgBuf */
++  hostMailboxMsg[index].cmd = (BYTE) cmd;
++  hostMailboxMsg[index].tag = (BYTE) tag;
++  hostMailboxMsg[index].param1 = (BYTE) p1;
++  hostMailboxMsg[index].param2 = (BYTE) p2;
++  rc = dslhal_support_blockWrite(&hostMailboxMsg,
++                                 (PVOID)mailboxControl.hostMsgBuf_p,
++                                 sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_HOSTQUEUE_LENGTH);
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockWrite failed\n");
++      return DSLHAL_ERROR_BLOCK_READ;
++    }
++  rc = dslhal_support_blockWrite(&mailboxControl,
++                                 &dspOamSharedInterface.dspHostMailboxControl_p,
++                                 sizeof(DEV_HOST_mailboxControl_t));
++  if (rc) 
++    return DSLHAL_ERROR_BLOCK_WRITE;
++  /* update the index */
++  mailboxControl.hostInInx = hostInInx; 
++  rc = dslhal_support_blockWrite(&mailboxControl.hostInInx,
++                                 &dspOamSharedInterface.dspHostMailboxControl_p->hostInInx,
++                                 sizeof(BYTE));
++  if (rc) 
++    return DSLHAL_ERROR_BLOCK_WRITE;
++  
++  dprintf(6,"dslhal_support_writeHostMailbox done\n");
++ return DSLHAL_ERROR_NO_ERRORS;
++ 
++}  
++/* end of dslhal_support_writeHostMailbox() */
++
++
++/********************************************************************************************
++* FUNCTION NAME:    dslhal_support_readTextMailbox
++*
++*********************************************************************************************
++* DESCRIPTION: Reads a message from the mailbox
++*
++* ARGUMENTS:   int *pcmd           Pointer to command read
++*
++* RETURNS:     0 if successful
++*              1 if no mail
++*              NZ otherwise
++*
++*****************************************************************************************/
++
++int dslhal_support_readTextMailbox(tidsl_t *ptidsl, int *pmsg1, int *pmsg2) 
++{
++  int rc;
++  unsigned int msg1;
++  unsigned int msg2;
++  unsigned char textOutInx;
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  DEV_HOST_mailboxControl_t mailboxControl;
++  DEV_HOST_textMsg_t textMailboxMsg[DEV_HOST_TEXTQUEUE_LENGTH];
++  
++  dprintf(6,"dslhal_support_readTextMailbox\n");
++  
++  /* get the DSP main pointer */
++
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
++
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  /* Read in the command/response buffer */
++  dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
++  
++ 
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, 
++                               &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++  /* Change the endianness of the Mailbox Pointer */
++  mailboxControl.textMsgBuf_p = (DEV_HOST_textMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.textMsgBuf_p);
++
++  rc = dslhal_support_blockRead((PVOID)mailboxControl.textMsgBuf_p, 
++                                     &textMailboxMsg, (sizeof(DEV_HOST_textMsg_t)*DEV_HOST_DSPQUEUE_LENGTH));
++  
++  if (rc) 
++    return DSLHAL_ERROR_BLOCK_READ;
++  /* Extract the command/response message index */
++  
++  mailboxControl.textInInx &= 7;   
++  mailboxControl.textOutInx &= 7;
++   
++  /* check for messages in the mailbox */
++  
++  if (mailboxControl.textOutInx == mailboxControl.textInInx) 
++    {
++    return DSLHAL_ERROR_MAILBOX_NOMAIL;
++    /* no messages to read */ 
++    }
++  
++  /* use bDRESPOutInx as index to DRESPMsgBuf */
++  
++  msg1 = textMailboxMsg[mailboxControl.textOutInx].msgPart1;
++  msg2 = textMailboxMsg[mailboxControl.textOutInx].msgPart2;
++  msg1 = (unsigned int) dslhal_support_byteSwap32((unsigned int)msg1);
++  msg2 = (unsigned int) dslhal_support_byteSwap32((unsigned int)msg2);
++
++  mailboxControl.textOutInx++;      /* increment count */ 
++  mailboxControl.textOutInx &= 7;   /* only two bits */
++  
++  textOutInx = mailboxControl.textOutInx;
++  
++  /* Read in the command response buffer again to take care of changes */
++
++  mailboxControl.textOutInx = textOutInx;
++  
++  rc = dslhal_support_blockWrite(&mailboxControl.textOutInx, 
++                                      &dspOamSharedInterface.dspHostMailboxControl_p->textOutInx, sizeof(BYTE));
++  
++  if (rc) 
++    return DSLHAL_ERROR_BLOCK_WRITE;
++  
++  /* Is the input parameter address non-zero*/
++  
++  if (pmsg1)
++    {
++    *pmsg1 = msg1;
++    }
++  if (pmsg2) 
++    {
++    *pmsg2 = msg2;
++    }
++
++  dprintf(6,"dslhal_support_readTextMailbox done\n");
++  dprintf(6,"msgPart1=%d, msgPart2=%d\n", msg1, msg2);
++  dprintf(6,"dslhal_support_readTextMailbox:Message Part1: 0x%x, tag=0x%x\n", msg1, msg2);
++  return DSLHAL_ERROR_NO_ERRORS;
++  
++} /* end of dslhal_support_readTextMailbox() */
++
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_hostDspCodeDownload()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   download DSP image from host memory to dsp memory
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++int dslhal_support_hostDspCodeDownload(tidsl_t * ptidsl)
++{
++
++  unsigned int index;
++  int rc = 0, i;
++  unsigned char *iptr;             /* image pointer */
++  unsigned int numbytes,olayXfer,olayStore;
++  /*  unsigned int holdSecPhyAddr=0,holdSecVirtAddr; */
++  unsigned int *olayStart;
++  size_t len;             /* size of the file */
++  size_t expoffset;       /* expected offset for next section header */
++  unsigned short checksum;
++  unsigned int crc32;
++  unsigned char * image;
++  char *tmp = (char *)DEV_HOST_DSP_OAM_POINTER_LOCATION;
++  DEV_HOST_dspVersionDef_t        dspVersion;
++#if SWTC 
++  DEV_HOST_tcHostCommDef_t        TCHostCommDef;
++#endif
++  DEV_HOST_oamWrNegoParaDef_t     OamWrNegoParaDef;
++  DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface, *pdspOamSharedInterface;
++  DEV_HOST_olayDpDef_t            olayDpParms;
++  DEV_HOST_profileBase_t          profileList;
++#ifndef NO_ACT
++  DEV_HOST_consBufDef_t           constDisp;
++#endif
++#if CO_PROFILES
++  DEV_HOST_coData_t               coData;
++#endif
++  DEV_HOST_olayDpPageDef_t        olayDpPageDef[NUM_PAGES];
++  union 
++  {
++  char byte[4];
++  unsigned short hword[2];
++  unsigned int aword;
++  } data;
++  
++  struct _header
++  {
++  char signature[6];
++  unsigned short sectcount;
++  unsigned int length;
++  } header;
++  
++  struct _section 
++  {
++  unsigned int addr;
++  unsigned int length;
++  unsigned int offset;
++  unsigned int page;
++  };/* section[MAXSECTIONS]; */
++  
++  struct _section *sptr;
++  unsigned int secAddr, secLength, secOffset, secPage;
++  
++  
++  dprintf(5,"dslhal_support_hostDspCodeDownload\n"); 
++  image = ptidsl->fwimage;
++  
++  if (!image) 
++    {
++      dprintf(1,"no image file\n"); 
++    return DSLHAL_ERROR_NO_FIRMWARE_IMAGE;
++    }
++  
++  iptr=image;
++  
++  numbytes = sizeof(header); 
++  
++  shim_osMoveMemory((char *) &header, (char *)iptr, numbytes);
++  header.length = dslhal_support_byteSwap32(header.length);
++  header.sectcount = dslhal_support_byteSwap16(header.sectcount);
++#if 0 
++  crc32 = dslhal_support_computeCrc32((unsigned char*)&crcTest[0],20);
++  dprintf(6,"CRC-32 for the crcTest: 0x%x",crc32);
++  dprintf(4,"header.length=%d, header.sectcount=0x%X\n", header.length, header.sectcount);
++#endif
++  /* point to the checksum */
++  /* compute the checksum on CRC32 here */
++  iptr = image + header.length-4;
++  numbytes = sizeof(data.aword);
++  
++  dprintf(5,"tiload: check checksum\n"); 
++  shim_osMoveMemory((char *)&(data.byte), (char *)iptr, numbytes);
++  
++  crc32 = dslhal_support_computeCrc32(image,ptidsl->imagesize);
++  dprintf(5,"CRC-32 for the Binary: 0x%x",crc32);
++  /* CRC currently not added to the DSP binary, so this code is commented out */
++  /* 
++  data.aword = dslhal_support_byteSwap32(data.aword);
++  if (data.aword != crc32) 
++    {
++      dprintf(1,"Checksum error\n");
++    }
++  */
++  /* Verify signature - Changed from "320C6x" to "TIDSL" for load 80 */
++  
++  header.signature[5]='\0';
++  dprintf(5, "signature=%s\n", header.signature);
++  
++  if (shim_osStringCmp(header.signature, "TIDSL")) 
++    {
++      dprintf(1,"Signature not match\n");
++      return DSLHAL_ERROR_FIRMWARE_OFFSET;
++    }
++  
++  dprintf(5,"tiload: check sect count\n");
++  /* check section count */
++ 
++  if (header.sectcount > MAXSECTIONS) 
++    {
++      dprintf(1,"Section # %d exceeds max %d\n", header.sectcount, MAXSECTIONS);
++      return DSLHAL_ERROR_FIRMWARE_OFFSET;
++    } 
++  else
++    {
++    dprintf(5,"found %d sections\n", header.sectcount);
++    }
++
++  /* Validation of Section offsets */
++  
++  /* point to the first section */
++  len = header.length;              /* file size in bytes */
++  expoffset = sizeof(struct _header) + header.sectcount * sizeof(struct _section);
++  
++  dprintf(5,"tiload: check offset\n");
++  for (index=0; index<header.sectcount; index++) /* parse the sections one by one */
++    {
++      numbytes = sizeof(struct _header) + index * sizeof(struct _section); /* Compute Section Offset */
++      sptr = (struct _section *)(image + numbytes); /* Section Pointer to beginning of the section */
++      
++    secAddr   = dslhal_support_byteSwap32(sptr->addr);
++    secOffset = dslhal_support_byteSwap32(sptr->offset);
++    secLength = dslhal_support_byteSwap32(sptr->length);
++    secPage   = dslhal_support_byteSwap32(sptr->page);
++    
++    /* validate offset */
++    if ( secOffset== 0xffffffff) 
++      {
++      /* special case: zero fill */
++      /* offset is valid, don't change expoffset */
++      } 
++    else 
++      {
++      if (secOffset > len-4) 
++        {
++          dprintf(5,"Offset error\n"); 
++          return DSLHAL_ERROR_FIRMWARE_OFFSET;
++        }
++      
++      /* determine expected offset of NEXT section  */
++      expoffset = secLength + secOffset;
++      
++      /* all addresses must be on word boundaries */
++      if (secAddr & 3) 
++        {
++          
++        }
++      }
++    }
++  
++  /* check final offset - should just be a checksum left */
++/* IMPORTANT 11/24/02 --> Got this error... but bypassed for Pf of Concept*/
++  /*
++  if (expoffset != len-4) 
++    {
++      dprintf(5,"Final offset error\n");
++      return DSLHAL_ERROR_FIRMWARE_OFFSET;
++    }
++  */
++
++  /* Actual Code loading to DSP Memory */  
++
++  /* Initialize DSP Data Memory before code load*/
++  dprintf(5,"Zero Prefill DSP DMEM\n");
++  DSLHAL_REG32(ADSLSSADR)=0x80000000;
++  shim_osZeroMemory((char *)0xa1000000, 0x10000);
++  /* Load sections from the image */
++  for (index=0; index<header.sectcount; index++) /* Parse each section */
++    {
++    numbytes = sizeof(header) + index * sizeof(struct _section); /* Compute offset to next section */
++    sptr = (struct _section *)(image + numbytes);   /* Point to next section */
++   
++    secAddr   = dslhal_support_byteSwap32(sptr->addr);
++    secOffset = dslhal_support_byteSwap32(sptr->offset);
++    secLength = dslhal_support_byteSwap32(sptr->length);
++    secPage   = dslhal_support_byteSwap32(sptr->page);
++    
++    data.aword = secAddr;
++    checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
++    
++    data.aword = secLength;
++    checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
++    
++    data.aword = secOffset;
++    checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
++    
++    data.aword = secPage;
++    checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
++    
++    
++    /* validate offset */
++    if (secOffset == 0xffffffff) 
++      {
++      /* special case: zero fill */
++      /* offset is valid, don't change expoffset */
++      } 
++    else 
++      {
++      /* real offset */
++      if(secOffset > len-4) 
++        {
++        dprintf(5,"section[%u] offset too big (%X/%X)\n", index,
++                secOffset, len-4);
++        
++        return DSLHAL_ERROR_FIRMWARE_OFFSET;
++        }
++      
++      /* determine expected offset of NEXT section */
++      expoffset = secLength + secOffset;
++      
++      }
++    
++    }  
++  
++  /* check final offset - should just be a checksum left */
++  /*
++  if(expoffset != len-4) 
++    {
++      dprintf(1,"sections don't span full file (%X/%X)\n",expoffset,len-2);   
++      return DSLHAL_ERROR_FIRMWARE_OFFSET;
++    }
++  */
++  dprintf(5,"tiload: load binary\n");
++  
++  for (index=0; index<header.sectcount; index++)
++    {
++    numbytes = sizeof(header) + index * sizeof(struct _section);
++    sptr = (struct _section *)(image + numbytes);  
++    
++    secAddr   = dslhal_support_byteSwap32(sptr->addr);
++    secOffset = dslhal_support_byteSwap32(sptr->offset);
++    secLength = dslhal_support_byteSwap32(sptr->length);
++    secPage   = dslhal_support_byteSwap32(sptr->page);
++    dprintf(5,"loading section %u\n", index);
++    dprintf(5,"section %u: addr: %X\n", index, secAddr);
++    dprintf(5,"section %u: length: %X\n", index, secLength);
++    dprintf(5,"section %u: offset: %X\n", index, secOffset);
++    dprintf(5,"section %u: page: %X\n", index, secPage);
++
++    /* point to the section's data */
++    if(secOffset != 0xffffffff) 
++      {
++      /* Load this section of data */
++      iptr = image + secOffset;
++      dprintf(6, "iptr %8x\n", (unsigned int)iptr);
++      }
++    
++    if(secPage)
++      { 
++      dprintf(6,"OVERLAY PAGE #%d\n",secPage);
++      /* overlay page, don't write to dsp yet, save into host memory*/
++
++      dprintf(6,"Section Length: %d \n",secLength);
++      ptidsl->olayDpPage[secPage].PmemStartWtAddr  = (unsigned int) shim_osAllocateDmaMemory(secLength);
++      if(ptidsl->olayDpPage[secPage].PmemStartWtAddr == NULL)
++       {
++          dprintf(1, "overlay page allocate error\n");
++          return DSLHAL_ERROR_OVERLAY_MALLOC;
++        }
++#ifdef PRE_SILICON
++      ptidsl->olayDpPage[secPage].overlayHostAddr = ((((ptidsl->olayDpPage[secPage].PmemStartWtAddr)-0x84000000)-0x10000000)+0x030b0000);
++#else
++      /*      ptidsl->olayDpPage[secPage].overlayHostAddr = ((unsigned int)(ptidsl->olayDpPage[secPage].PmemStartWtAddr)&~0xe0000000); */
++      ptidsl->olayDpPage[secPage].overlayHostAddr = virtual2Physical((unsigned int)ptidsl->olayDpPage[secPage].PmemStartWtAddr);
++#endif
++      dprintf(6,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->olayDpPage[secPage].PmemStartWtAddr,ptidsl->olayDpPage[secPage].overlayHostAddr);
++
++      ptidsl->olayDpPage[secPage].overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->olayDpPage[secPage].overlayHostAddr);
++      ptidsl->olayDpPage[secPage].OverlayXferCount = secLength;
++      ptidsl->olayDpPage[secPage].BinAddr          = secAddr;
++      ptidsl->olayDpPage[secPage].SecOffset        = secOffset;
++      shim_osMoveMemory((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, (char *)iptr, secLength);
++      /*   RamP Image ByteSwap test */
++      olayStart = (unsigned int *)ptidsl->olayDpPage[secPage].PmemStartWtAddr;
++            
++      for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
++        {
++          olayStore = *(unsigned int *)olayStart;
++          olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
++          *(unsigned int*)olayStart = olayStore;
++          dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
++          olayStart++;
++          olayStore=0;
++        }
++      /* RamP Image ByteSwap test */
++      /* compute the CRC of each overlay page and Store the Checksum in a local global variable */
++      /* This Value of CRC is to be compared with the header where all the CRC bytes are lumped together */
++      ptidsl->olayDpPage[secPage].olayPageCrc32 = dslhal_support_computeCrc32((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, ptidsl->olayDpPage[secPage].OverlayXferCount);
++
++      shim_osWriteBackCache((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, secLength);
++      }
++    else
++      {      
++       rc = secAddr&0xff000000;
++       if(rc && rc!=0x80000000)
++        {
++          dprintf(4,"Not DSP PMEM/DMEM\n");
++          /* don't write to dsp, save into host memory*/
++          dprintf(4,"Section Addr: %x Section Length: %d \n",secAddr,secLength);
++          ptidsl->coProfiles.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength);
++          if(ptidsl->coProfiles.PmemStartWtAddr == NULL)
++          {
++           dprintf(1, "memory allocate error\n");
++           return DSLHAL_ERROR_OVERLAY_MALLOC;
++          }
++      ptidsl->coProfiles.overlayHostAddr =  virtual2Physical((unsigned int)ptidsl->coProfiles.PmemStartWtAddr);
++      dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.overlayHostAddr);
++      ptidsl->coProfiles.overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->coProfiles.overlayHostAddr);
++      ptidsl->coProfiles.OverlayXferCount = secLength;
++      ptidsl->coProfiles.BinAddr = secAddr;
++      ptidsl->coProfiles.SecOffset = secOffset;
++
++      shim_osMoveMemory((char *)ptidsl->coProfiles.PmemStartWtAddr, (char *)iptr, secLength);
++      /*   RamP Image ByteSwap test */
++      olayStart = (unsigned int *)ptidsl->coProfiles.PmemStartWtAddr;
++            
++      for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
++        {
++          olayStore = *(unsigned int *)olayStart;
++          olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
++          *(unsigned int*)olayStart = olayStore;
++          dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
++          olayStart++;
++          olayStore=0;
++        }
++      shim_osWriteBackCache((void *)ptidsl->coProfiles.PmemStartWtAddr, secLength);
++        }
++      else
++        {
++      /* IMPORTANT: write image to DSP memory */
++      rc=dslhal_support_blockWrite((void *)iptr, (void *)secAddr, secLength);
++      if(rc)
++        {
++        dprintf(1,"dslhal_support_blockRead failed\n");
++        return DSLHAL_ERROR_BLOCK_READ;
++        }
++       shim_osClockWait(0x50000);
++      /*
++      rc=dslhal_support_blockRead((void*)secAddr, (void*)tmpBuffer, secLength);
++      if(rc)
++        {
++        dprintf(1,"dslhal_support_blockRead failed\n");
++        return DSLHAL_ERROR_BLOCK_READ;
++        }
++      for(i=0;i<secLength;i++)
++        {
++        if(*iptr
++        }*/
++        }
++      }
++    } /* end of write dsp image */
++
++  /***********************************************************************************
++   * Start to fillup various values to our hardware structure for late use
++   ************************************************************************************/
++  
++  /* get main pointer for data */
++
++  rc = dslhal_support_blockRead(tmp, &pdspOamSharedInterface, sizeof(unsigned int));
++  dprintf(5, "tmp=0x%X, addr=0x%X\n", (unsigned int)tmp, (unsigned int)pdspOamSharedInterface);
++  pdspOamSharedInterface= (DEV_HOST_dspOamSharedInterface_t *)dslhal_support_byteSwap32((unsigned int)pdspOamSharedInterface);
++  dprintf(5, "tmp=0x%X, addr=0x%X\n", (unsigned int)tmp, (unsigned int)pdspOamSharedInterface);
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++  if(!pdspOamSharedInterface)
++    {
++    dprintf(1,"Couldn't read main pointer\n");
++    return DSLHAL_ERROR_INVALID_PARAM;
++    }
++  
++  ptidsl->pmainAddr=pdspOamSharedInterface;
++
++  /* read the OamSharedInterfaceStructure */
++  
++  dprintf(5,"ptidsl->hostIf.mainAddr=0x%X\n", (unsigned int)ptidsl->pmainAddr);
++  
++  /* get the pointer to DSP-OAM Shared Interface */
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  /* Communicate the Allocated Memory Address to DSP to choose CO Profiles */
++
++  /* Change the Endianness of the profileList pointer */
++  dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
++  /* Access the profileList Structure */
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  dprintf(2,"Old Addr:%x  New: %x \n",profileList.hostProfileBase_p,ptidsl->coProfiles.overlayHostAddr); 
++  profileList.hostProfileBase_p = (DEV_HOST_coData_t *)ptidsl->coProfiles.overlayHostAddr;
++  rc = dslhal_support_blockWrite(&profileList,(PVOID)dspOamSharedInterface.profileList_p,sizeof(DEV_HOST_profileBase_t));
++     if (rc) 
++       return DSLHAL_ERROR_BLOCK_WRITE;
++
++  /* Communicate the Allocated Memory Address to DSP to do overlays */
++
++  /* Change the Endianness of the olayDpDef pointer */
++  dspOamSharedInterface.olayDpParms_p = (DEV_HOST_olayDpDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.olayDpParms_p);
++  /* Access the olayDpDef Structure */
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.olayDpParms_p,&olayDpParms, sizeof(DEV_HOST_olayDpDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++
++  for(i=1;i<NUM_PAGES;i++)
++   {
++  /* Change the endianness of the olayDpPageDef Pointer */
++     olayDpParms.olayDpPage_p[i] = (DEV_HOST_olayDpPageDef_t *) dslhal_support_byteSwap32((unsigned int)olayDpParms.olayDpPage_p[i]);
++     /* Access the olayDpPageDef Structure */
++     rc = dslhal_support_blockRead((PVOID)olayDpParms.olayDpPage_p[i],&olayDpPageDef[i],sizeof(DEV_HOST_olayDpPageDef_t));
++     if (rc) 
++       return DSLHAL_ERROR_BLOCK_READ;
++     olayDpPageDef[i].overlayHostAddr = ptidsl->olayDpPage[i].overlayHostAddr;
++     rc = dslhal_support_blockWrite(&olayDpPageDef[i],(PVOID)olayDpParms.olayDpPage_p[i],sizeof(DEV_HOST_olayDpPageDef_t));
++     if (rc) 
++       return DSLHAL_ERROR_BLOCK_WRITE;
++   }
++  
++  /* Change the endianness of the Datapump Version Pointer */    
++  dspOamSharedInterface.datapumpVersion_p = (DEV_HOST_dspVersionDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.datapumpVersion_p);
++
++  /* get DSPVersion itself */
++   
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.datapumpVersion_p,&dspVersion, sizeof(DEV_HOST_dspVersionDef_t));
++ 
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++  /* table_dsp info */
++#if SWTC
++  dspOamSharedInterface.tcHostComm_p = (DEV_HOST_tcHostCommDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
++  rc = dslhal_support_blockRead(&pdspOamSharedInterface->tcHostComm_p,
++                                    &pTCHostCommDef, 4);
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++    pTCHostCommDef=(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)pTCHostCommDef);
++  
++   rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, 
++                               &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++#endif
++  /* Select the Multimode Training */
++  dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p, &OamWrNegoParaDef, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++switch(dspVersion.netService)
++  {
++  case 1:  OamWrNegoParaDef.stdMode = MULTI_MODE;
++           dprintf(5,"POTS Service \n");
++           ptidsl->netService = 1;
++           break;
++  case 2:  OamWrNegoParaDef.stdMode = GDMT_MODE;
++           dprintf(5,"ISDN Service \n");
++           ptidsl->netService = 2;
++           break;
++  default: OamWrNegoParaDef.stdMode = T1413_MODE;
++           dprintf(5,"Default Service \n");
++           break;
++  }
++
++   ptidsl->AppData.StdMode = (unsigned int)OamWrNegoParaDef.stdMode;
++
++   OamWrNegoParaDef.oamFeature = dslhal_support_byteSwap32((OAMFEATURE_TC_SYNC_DETECT_MASK));
++  /* Set the flag to start retraining if the margin of the modem drops below 
++     default margin during showtime */
++  
++  OamWrNegoParaDef.marginMonitorShwtme = FALSE; 
++    /*  Set the flag to start retraining if the margin of the modem drops below default margin during training */
++   
++  OamWrNegoParaDef.marginMonitorTrning = FALSE;
++  OamWrNegoParaDef.dsToneTurnoff_f = 0;
++  dslhal_support_blockWrite(&OamWrNegoParaDef, 
++                                 (PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
++  rc=dslhal_support_setInterruptMask(ptidsl,0);
++  if(rc!=DSLHAL_ERROR_NO_ERRORS)
++    return rc;
++  /* Co Profile Test */
++#if CO_PROFILES
++  dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
++  /* Access the profileList Structure */
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  profileList.hostProfileBase_p = (DEV_HOST_coData_t *)dslhal_support_byteSwap32((unsigned int)profileList.hostProfileBase_p);
++  rc = dslhal_support_blockRead((PVOID)profileList.hostProfileBase_p,&coData, sizeof(DEV_HOST_coData_t));
++  if (rc)
++   {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  dprintf(2,"Current Profile Vendor Id: %x \n",coData.phyAgcPgaTarget);
++  coData.phyAgcPgaTarget = 0xcaba;
++  rc = dslhal_support_blockWrite(&coData,(PVOID)profileList.hostProfileBase_p,sizeof(DEV_HOST_coData_t));
++  if(rc)
++    return DSLHAL_ERROR_BLOCK_WRITE;
++#endif
++  /* End of CO Profile Test */
++
++#ifndef NO_ACT
++  /* Constellation Display Buffer Allocate */
++  ptidsl->constDisplay.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(DSP_CONSTELLATION_BUFFER_SIZE);
++  if(ptidsl->constDisplay.PmemStartWtAddr == NULL)
++    {
++      dprintf(1, "memory allocate error\n");
++      return DSLHAL_ERROR_OVERLAY_MALLOC;
++     }
++  shim_osZeroMemory((void*)ptidsl->constDisplay.PmemStartWtAddr,DSP_CONSTELLATION_BUFFER_SIZE);
++  ptidsl->constDisplay.overlayHostAddr =  virtual2Physical((unsigned int)ptidsl->constDisplay.PmemStartWtAddr);
++      dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.overlayHostAddr);
++      ptidsl->constDisplay.OverlayXferCount = DSP_CONSTELLATION_BUFFER_SIZE;
++
++  /* Communicate the Allocated Buffer for DSP load Constellation Data */
++
++  /* Change the Endianness of the profileList pointer */
++  dspOamSharedInterface.consDispVar_p = (DEV_HOST_consBufDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.consDispVar_p);
++  /* Access the profileList Structure */
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.consDispVar_p,&constDisp, sizeof(DEV_HOST_consBufDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  dprintf(2,"Constellation Old Addr:%x  New: %x \n",constDisp.consDispStartAddr,ptidsl->constDisplay.overlayHostAddr); 
++  constDisp.consDispStartAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->constDisplay.overlayHostAddr);
++  constDisp.consDispCurrentAddr = constDisp.consDispStartAddr;
++  constDisp.consDispBufLen = (unsigned int)dslhal_support_byteSwap32(DSP_CONSTELLATION_BUFFER_SIZE);
++  rc = dslhal_support_blockWrite(&constDisp,(PVOID)dspOamSharedInterface.consDispVar_p,sizeof(DEV_HOST_consBufDef_t));
++     if (rc) 
++       return DSLHAL_ERROR_BLOCK_WRITE;
++#endif
++  dprintf(5,"dslhal_support_hostDspCodeDownload() completed.\n");
++  return DSLHAL_ERROR_NO_ERRORS;
++  
++}  /* end of dslhal_support_hostDspCodeDownload() */
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_readDelineationState()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   download DSP image from host memory to dsp memory
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++unsigned int dslhal_support_readDelineationState(tidsl_t * ptidsl)
++{
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  DEV_HOST_atmStats_t           atmStats;
++  DEV_HOST_dsAtmStats_t         dsAtmStats0;
++  unsigned int rc=0, delinState=0;
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++  dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
++  
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
++  
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return DSLHAL_ERROR_BLOCK_READ;
++    }
++  
++  atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
++  
++  rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
++
++  if (rc) 
++    return rc;
++  delinState = dslhal_support_byteSwap32(dsAtmStats0.delineationState);
++  if(delinState == TC_SYNC)
++     ptidsl->lConnected = 1;
++  else
++     ptidsl->lConnected = 0;
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_processModemStateBitField()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   download DSP image from host memory to dsp memory
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++unsigned int dslhal_support_processModemStateBitField(tidsl_t * ptidsl)
++{
++  int rc, offset[2]={2,0};
++  int modemStateBitFields[NUMBER_OF_BITFIELDS],changedField=0;
++  rc = dslhal_api_dspInterfaceRead(ptidsl,(unsigned int)ptidsl->pmainAddr,2,(unsigned int *)&offset,
++                                  (unsigned char *)&modemStateBitFields,NUMBER_OF_BITFIELDS*sizeof(int));
++  if (rc)
++    return DSLHAL_ERROR_BLOCK_READ;
++  for(rc=0;rc<NUMBER_OF_BITFIELDS;rc++)
++    dprintf(4,"Bit Field %d: 0x%x \n",rc+1,dslhal_support_byteSwap32((unsigned int)modemStateBitFields[rc]));
++
++  for(rc=NUMBER_OF_BITFIELDS;rc>0;rc--)
++    {
++     if(ptidsl->modemStateBitField[rc-1]!=modemStateBitFields[rc-1])
++       {
++         changedField = rc;
++         break;
++       }
++    }
++  if(changedField)
++    {
++      for(rc=0;rc<32;rc++)
++        {
++           if(modemStateBitFields[changedField-1] & dslhal_support_byteSwap32((BITFIELD_SCAN >> rc)))
++             break;
++         }
++      dprintf(5,"Changed Field : %d  Changed Bit : %d \n",changedField,(31-rc));
++      ptidsl->rState = ((changedField*100) + (31-rc));
++      dprintf(5,"Modem State : %d \n",ptidsl->rState);
++      shim_osMoveMemory((void *)ptidsl->modemStateBitField,(void *)modemStateBitFields, 4*NUMBER_OF_BITFIELDS);
++    }
++
++  switch(changedField)
++    {
++    case 1:  if((ptidsl->rState >= ATU_RIDLE) && (ptidsl->AppData.bState < RSTATE_IDLE))
++                   ptidsl->AppData.bState = RSTATE_IDLE;
++             if((ptidsl->rState >= GDMT_NSFLR) && (ptidsl->AppData.bState < RSTATE_INIT))
++                 ptidsl->AppData.bState = RSTATE_INIT;
++             if((ptidsl->rState >= GDMT_ACKX) && (ptidsl->AppData.bState < RSTATE_HS))
++                 ptidsl->AppData.bState = RSTATE_HS;
++             break;
++
++    case 2:  if((ptidsl->rState >= T1413_NSFLR) && (ptidsl->AppData.bState < RSTATE_INIT))
++                 ptidsl->AppData.bState = RSTATE_INIT;
++             if((ptidsl->rState >= T1413_ACKX) && (ptidsl->AppData.bState < RSTATE_HS))
++                 ptidsl->AppData.bState = RSTATE_HS;
++             if((ptidsl->rState == ATU_RSHOWTIME) && (ptidsl->AppData.bState < RSTATE_SHOWTIME))
++                 ptidsl->AppData.bState = RSTATE_SHOWTIME;
++             break;
++ 
++    case 3:  if((ptidsl->rState >= ADSL2_COMB3) && (ptidsl->AppData.bState < RSTATE_INIT))
++                 ptidsl->AppData.bState = RSTATE_INIT;
++             if((ptidsl->rState >= ADSL2_RPARAMS) && (ptidsl->AppData.bState < RSTATE_HS))
++                 ptidsl->AppData.bState = RSTATE_HS;
++             break;
++ 
++    case 4:  break;
++    default: break;
++    }
++
++  ptidsl->stateTransition = modemStateBitFields[1];
++  switch(ptidsl->AppData.bState)
++    {
++    case RSTATE_IDLE:       ptidsl->AppData.idleTick=shim_osClockTick();
++                            ptidsl->AppData.initTick=0;
++                            ptidsl->AppData.showtimeTick=0;
++                            break;
++    case RSTATE_HS:         if(!ptidsl->AppData.initTick)
++                              {
++                                ptidsl->AppData.initTick=shim_osClockTick();
++                                }
++                            ptidsl->AppData.showtimeTick=0;  
++                            break;
++    case RSTATE_SHOWTIME:   if(!ptidsl->AppData.showtimeTick)
++                              ptidsl->AppData.showtimeTick=shim_osClockTick();
++                            break;
++    default:                break;
++                              }
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_setInterruptMask()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++unsigned int dslhal_support_setInterruptMask(tidsl_t * ptidsl,unsigned int inputMask)
++{
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  DEV_HOST_hostInterruptMask_t interruptMask;
++  unsigned int rc=0;
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return DSLHAL_ERROR_BLOCK_READ;
++    }
++  dspOamSharedInterface.hostInterruptMask_p =(DEV_HOST_hostInterruptMask_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.hostInterruptMask_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.hostInterruptMask_p,
++                                     &interruptMask, sizeof(DEV_HOST_hostInterruptMask_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  if(inputMask & MASK_MAILBOX_INTERRUPTS)
++    {
++      dprintf(7,"Mailbox Interrupts Masked \n");
++      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
++      interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_MAILBOX_INTERRUPTS);
++      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
++    }
++  if(inputMask & MASK_BITFIELD_INTERRUPTS)
++    {
++      dprintf(7,"Bit field Interrupts Masked \n");
++      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
++      interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_BITFIELD_INTERRUPTS);
++      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
++    }
++  if(inputMask & MASK_HEARTBEAT_INTERRUPTS)
++    {
++      dprintf(7,"Bit field Interrupts Masked \n");
++      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
++      interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_HEARTBEAT_INTERRUPTS);
++      dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
++    }
++  dslhal_support_blockWrite(&interruptMask, 
++                                 dspOamSharedInterface.hostInterruptMask_p, sizeof(DEV_HOST_hostInterruptMask_t));
++  dprintf(5,"dslhal_support_setInterruptMask() completed.\n");
++  return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_parseInterruptSource()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Parses the Interrupt Source Bit Field
++*
++* Return: interrupt Code if successful
++*         negative error code if failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++unsigned int dslhal_support_parseInterruptSource(tidsl_t * ptidsl)
++{
++  DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
++  DEV_HOST_hostInterruptSource_t interruptSource;
++  unsigned int rc=0,intrCode=0;
++  pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
++  rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++      dprintf(1,"dslhal_support_blockRead failed\n");
++      return (0-DSLHAL_ERROR_BLOCK_READ);
++    }
++  dspOamSharedInterface.hostInterruptSource_p =(DEV_HOST_hostInterruptSource_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.hostInterruptSource_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.hostInterruptSource_p,
++                                     &interruptSource, sizeof(DEV_HOST_hostInterruptSource_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return (0-DSLHAL_ERROR_BLOCK_READ);
++    }
++  if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_MAILBOX_INTERRUPTS))
++    {
++      dprintf(7,"Mailbox Interrupts Acknowledge \n");
++      intrCode |= 0x00000011;
++    }
++  if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_BITFIELD_INTERRUPTS))
++    {
++      dprintf(7,"Bit field Interrupt Acknowledge \n");
++      intrCode |= 0x00001002;
++    }
++  if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_HEARTBEAT_INTERRUPTS))
++    {
++      dprintf(7,"HeartBeat Interrupt Acknowledge \n");
++      intrCode |= 0x00100004;
++    }
++  
++  interruptSource.sourceBitField1 &=0x0;
++  rc=dslhal_support_blockWrite(&interruptSource, 
++                                 dspOamSharedInterface.hostInterruptSource_p, sizeof(DEV_HOST_hostInterruptSource_t));
++  if(rc)
++    return (0-DSLHAL_ERROR_BLOCK_WRITE);
++  dprintf(5,"dslhal_support_parseInterruptSource() completed.\n");
++  return intrCode;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_byteSwap16()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   input 16 bit short, byte swap from little endian to big endian or vise versa
++*
++********************************************************************************************/
++
++unsigned short dslhal_support_byteSwap16(unsigned short in16Bits)
++{
++    unsigned short out16Bits;
++    
++#ifdef EB
++    unsigned char *pchar;
++    unsigned char tmp;
++#endif
++    
++    out16Bits = in16Bits;
++
++#ifdef EB    
++    pchar = (unsigned char *)(&out16Bits);
++    
++    tmp = *pchar;
++    *pchar = *(pchar + 1);
++    *(pchar + 1) = tmp;
++#endif
++    
++    return out16Bits;
++    
++} /* end of dslhal_support_byteSwap16() */
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_byteSwap32()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   input 32 bit int, byte swap from little endian to big endian or vise versa
++*
++********************************************************************************************/
++
++unsigned int dslhal_support_byteSwap32(unsigned int in32Bits)
++{
++    int out32Bits;
++
++#ifdef EB
++    unsigned char tmp;
++    unsigned char *pchar;
++#endif    
++
++    out32Bits = in32Bits;
++    
++#ifdef EB
++    pchar = (unsigned char *)(&out32Bits);
++    
++    tmp = *pchar;
++    *pchar = *(pchar + 3);
++    *(pchar + 3) = tmp;
++    
++    tmp = *(pchar + 1);
++    *(pchar + 1) = *(pchar + 2);
++    *(pchar + 2) = tmp;
++#endif
++    
++    return out32Bits;
++    
++} /* end of dslhal_support_byteSwap32() */
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_computeCrc32()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data
++*
++* Return: 32 bit CRC of the input data
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_computeCrc32(unsigned char *data, int len)
++{
++    unsigned int        result;
++    int                 i,j;
++    unsigned char       octet;
++   
++    if ((len < 4) || (data==NULL))
++        return(0xdeaddead);
++    result = *data++ << 24;
++    result |= *data++ << 16;
++    result |= *data++ << 8;
++    result |= *data++;
++    result = ~ result;
++
++    len -=4;
++
++    for (i=0; i<len; i++)
++    {
++        octet = *(data++);
++        for (j=0; j<8; j++)
++        {
++            if (result & 0x80000000)
++            {
++               result = (result << 1) ^ CRC32_QUOTIENT ^ (octet >> 7);
++            }
++            else
++            {
++               result = (result << 1) ^ (octet >> 7);
++            }
++            octet <<= 1;
++        }
++    }
++    return ~result;            /* The complement of the remainder */
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_checkOverlayPage()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data and compares it with reference
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_checkOverlayPage(tidsl_t *ptidsl, unsigned int tag)
++{
++  unsigned int computedCrc;
++  if((unsigned char *)ptidsl->olayDpPage[tag].PmemStartWtAddr == NULL)
++  {
++     dprintf(5,"Null Address for Page: %d\n",tag);
++         return DSLHAL_ERROR_OVERLAY_MALLOC;
++  }
++  computedCrc = dslhal_support_computeCrc32((unsigned char *)ptidsl->olayDpPage[tag].PmemStartWtAddr, ptidsl->olayDpPage[tag].OverlayXferCount);
++  dprintf(6,"\n Pre-Computed CRC32 = 0x%x \t Current CRC32 = 0x%x \n",ptidsl->olayDpPage[tag].olayPageCrc32,computedCrc); 
++  if(computedCrc != ptidsl->olayDpPage[tag].olayPageCrc32)
++      return DSLHAL_ERROR_OVERLAY_CORRUPTED;
++  else
++      return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_clearTrainingInfo()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data and compares it with reference
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++int dslhal_support_clearTrainingInfo(tidsl_t *ptidsl)
++{
++  int i;
++  
++  for(i=0; i<NUM_PAGES; i++)
++    {
++    if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
++      {
++      shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, 
++                   ptidsl->olayDpPage[i].OverlayXferCount);
++      ptidsl->olayDpPage[i].PmemStartWtAddr =NULL;
++      }
++    }
++  if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
++    {
++     shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
++     ptidsl->coProfiles.PmemStartWtAddr = NULL;
++    }
++  return 0;
++}
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_reloadTrainingInfo()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Reload overlay pages from flash or memory
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++int dslhal_support_reloadTrainingInfo(tidsl_t * ptidsl)
++{
++
++  int rc = 0, i;
++  unsigned int olayXfer,olayStore;
++  unsigned int *olayStart;
++  
++  unsigned int crc32;
++  DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface;
++  DEV_HOST_olayDpDef_t            olayDpParms;
++  DEV_HOST_olayDpPageDef_t        olayDpPageDef[NUM_PAGES];
++  DEV_HOST_profileBase_t          profileList;
++  
++  unsigned int secLength, secOffset, secPage;
++
++  /* co profile */
++  secLength = ptidsl->coProfiles.OverlayXferCount;
++  secOffset = ptidsl->coProfiles.SecOffset;
++  ptidsl->coProfiles.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength);
++  if(ptidsl->coProfiles.PmemStartWtAddr == NULL)
++  {
++    dprintf(1, "memory allocate error\n");
++    return DSLHAL_ERROR_OVERLAY_MALLOC;
++  }
++          /* holdSecPhyAddr = virtual2Physical((unsigned int)holdSecVirtAddr); */
++  ptidsl->coProfiles.overlayHostAddr =  virtual2Physical((unsigned int)ptidsl->coProfiles.PmemStartWtAddr);
++  dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.overlayHostAddr);
++  ptidsl->coProfiles.overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->coProfiles.overlayHostAddr);
++  
++  rc = shim_read_overlay_page((void *)ptidsl->coProfiles.PmemStartWtAddr, secOffset, secLength);
++  if(rc != secLength)
++  {
++    dprintf(1, "shim_read_overlay_page failed\n");
++    return DSLHAL_ERROR_OVERLAY_MALLOC;
++  }
++
++  /*shim_osMoveMemory((char *)ptidsl->coProfiles.PmemStartWtAddr, (char *)iptr, secLength);*/
++  /*   RamP Image ByteSwap test */
++  olayStart = (unsigned int *)ptidsl->coProfiles.PmemStartWtAddr;
++            
++  for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
++  {
++    olayStore = *(unsigned int *)olayStart;
++    olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
++    *(unsigned int*)olayStart = olayStore;
++    dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
++    olayStart++;
++    olayStore=0;
++  }
++  shim_osWriteBackCache((void *)ptidsl->coProfiles.PmemStartWtAddr, secLength);
++ 
++
++  for (secPage=1;secPage<NUM_PAGES; secPage++)
++  {
++
++    dprintf(6,"OVERLAY PAGE #%d\n",secPage);
++   
++    secLength = ptidsl->olayDpPage[secPage].OverlayXferCount;
++
++    dprintf(4,"Section[%d] Length: %d \n",secPage, secLength);
++
++    secOffset = ptidsl->olayDpPage[secPage].SecOffset;
++    ptidsl->olayDpPage[secPage].PmemStartWtAddr  = (unsigned int) shim_osAllocateDmaMemory(secLength);
++    if(ptidsl->olayDpPage[secPage].PmemStartWtAddr == NULL)
++    {
++      dprintf(1, "overlay page allocate error\n");
++      return DSLHAL_ERROR_OVERLAY_MALLOC;
++    }
++
++    rc = shim_read_overlay_page((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr,secOffset, secLength);
++    if(rc != secLength)
++    {
++      dprintf(1, "overlay page read error\n");
++      return DSLHAL_ERROR_OVERLAY_MALLOC;
++    }
++
++    /* ptidsl->olayDpPage[secPage].overlayHostAddr = ((unsigned int)(ptidsl->olayDpPage[secPage].PmemStartWtAddr)&~0xe0000000); */
++    ptidsl->olayDpPage[secPage].overlayHostAddr = virtual2Physical((unsigned int)ptidsl->olayDpPage[secPage].PmemStartWtAddr);
++    dprintf(6,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->olayDpPage[secPage].PmemStartWtAddr,ptidsl->olayDpPage[secPage].overlayHostAddr);
++
++    ptidsl->olayDpPage[secPage].overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->olayDpPage[secPage].overlayHostAddr);
++    /*ptidsl->olayDpPage[secPage].OverlayXferCount = secLength;
++      ptidsl->olayDpPage[secPage].BinAddr          = secAddr;
++      shim_osMoveMemory((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, (char *)iptr, secLength);
++    */
++    olayStart = (unsigned int *)ptidsl->olayDpPage[secPage].PmemStartWtAddr;
++            
++    for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
++    {
++      olayStore = *(unsigned int *)olayStart;
++      olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
++      *(unsigned int*)olayStart = olayStore;
++      dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
++      olayStart++;
++      olayStore=0;
++    }
++      /* RamP Image ByteSwap test */
++      /* compute the CRC of each overlay page and Store the Checksum in a local global variable */
++      /* This Value of CRC is to be compared with the header where all the CRC bytes are lumped together */
++    crc32 = dslhal_support_computeCrc32((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, ptidsl->olayDpPage[secPage].OverlayXferCount);
++    if(crc32 != ptidsl->olayDpPage[secPage].olayPageCrc32)
++      return DSLHAL_ERROR_OVERLAY_MALLOC;
++
++    shim_osWriteBackCache((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, secLength);
++  }
++
++  
++  dprintf(5,"ptidsl->hostIf.mainAddr=0x%X\n", (unsigned int)ptidsl->pmainAddr);
++  
++  /* get the pointer to DSP-OAM Shared Interface */
++  rc = dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface, 
++                                     sizeof(DEV_HOST_dspOamSharedInterface_t));
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  /* Communicate the Allocated Memory Address to DSP to choose CO Profiles */
++
++  /* Change the Endianness of the profileList pointer */
++  dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
++  /* Access the profileList Structure */
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++  dprintf(2,"Old Addr:%x  New: %x \n",profileList.hostProfileBase_p,ptidsl->coProfiles.overlayHostAddr); 
++  profileList.hostProfileBase_p = (DEV_HOST_coData_t *)ptidsl->coProfiles.overlayHostAddr;
++  rc = dslhal_support_blockWrite(&profileList,(PVOID)dspOamSharedInterface.profileList_p,sizeof(DEV_HOST_profileBase_t));
++     if (rc) 
++       return DSLHAL_ERROR_BLOCK_WRITE;
++
++  /* Communicate the Allocated Memory Address to DSP to do overlays */
++
++  /* Change the Endianness of the olayDpDef pointer */
++  dspOamSharedInterface.olayDpParms_p = (DEV_HOST_olayDpDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.olayDpParms_p);
++  /* Access the olayDpDef Structure */
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.olayDpParms_p,&olayDpParms, sizeof(DEV_HOST_olayDpDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++
++  for(i=1;i<NUM_PAGES;i++)
++   {
++  /* Change the endianness of the olayDpPageDef Pointer */
++     olayDpParms.olayDpPage_p[i] = (DEV_HOST_olayDpPageDef_t *) dslhal_support_byteSwap32((unsigned int)olayDpParms.olayDpPage_p[i]);
++     /* Access the olayDpPageDef Structure */
++     rc = dslhal_support_blockRead((PVOID)olayDpParms.olayDpPage_p[i],&olayDpPageDef[i],sizeof(DEV_HOST_olayDpPageDef_t));
++     if (rc) 
++       return DSLHAL_ERROR_BLOCK_READ;
++     olayDpPageDef[i].overlayHostAddr = ptidsl->olayDpPage[i].overlayHostAddr;
++     rc = dslhal_support_blockWrite(&olayDpPageDef[i],(PVOID)olayDpParms.olayDpPage_p[i],sizeof(DEV_HOST_olayDpPageDef_t));
++     if (rc) 
++       return DSLHAL_ERROR_BLOCK_WRITE;
++   }
++  
++  ptidsl->bOverlayPageLoaded = 1;
++  return DSLHAL_ERROR_NO_ERRORS;
++}  
++  /* end of dslhal_support_reloadTrainingInfo() */
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_restoreTrainingInfo()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data and compares it with reference
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++
++int dslhal_support_restoreTrainingInfo(tidsl_t *ptidsl)
++{
++  int rc;
++  
++  rc=1;
++  while(rc != 0)
++    {
++    dslhal_support_clearTrainingInfo(ptidsl);
++    //shim_osCriticalEnter();
++    rc = dslhal_support_reloadTrainingInfo(ptidsl);
++    //shim_osCriticalExit();
++    shim_osClockWait(6400);
++    }
++  return 0;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_advancedIdleProcessing()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Idle State Processing Functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_advancedIdleProcessing(tidsl_t *ptidsl)
++{
++  int rc=0;
++  ptidsl->AppData.bState = RSTATE_IDLE;
++#ifndef NO_ACT
++  rc +=  dslhal_advcfg_resetBitSwapMessageLog(ptidsl,0);
++  rc += dslhal_advcfg_resetBitSwapMessageLog(ptidsl,1);
++  rc += dslhal_advcfg_resetTrainStateHistory(ptidsl);
++  rc += dslhal_advcfg_getReasonForDrop(ptidsl);
++#endif
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++  else
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_aocBitSwapProcessing()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Idle State Processing Functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_aocBitSwapProcessing(tidsl_t *ptidsl,unsigned int usDs)
++{
++  int rc=0;
++#ifndef NO_ACT
++  int i;
++  int differentCmd_f;
++  unsigned int dsSwapInx;
++
++  static UINT8 lastAturBitSwapCommands[6] = {0, 0, 0, 0, 0, 0};
++  static UINT8 lastAturBitSwapBinNum[6] = {0, 0, 0, 0, 0, 0};
++
++  if (usDs == 0)
++  {
++    dprintf(4," DSP_XMITBITSWAP\n");
++    rc += dslhal_advcfg_getAocBitswapBuffer(ptidsl,0);
++    ptidsl->usBitSwapInx++;
++    if (ptidsl->usBitSwapInx > 29)
++      ptidsl->usBitSwapInx=0;
++  }
++
++  if (usDs == 1)
++  {
++    dprintf(4," DSP_RCVBITSWAP\n");
++    rc += dslhal_advcfg_getAocBitswapBuffer(ptidsl,1);
++    differentCmd_f = FALSE;
++    dsSwapInx = ptidsl->dsBitSwapInx;
++    if (! rc)
++    {
++      for (i = 0; i < 6; i++)
++      {
++        if (lastAturBitSwapCommands[i] != ptidsl->dsBitSwap[dsSwapInx].bitSwapCommand[i])
++        {
++          differentCmd_f = TRUE;
++          break;
++        }
++      }
++      if (! differentCmd_f)
++      {
++        for (i = 0; i < 6; i++)
++        {
++          if (lastAturBitSwapBinNum[i] != ptidsl->dsBitSwap[dsSwapInx].bitSwapBinNum[i])
++          {
++            differentCmd_f = TRUE;
++            break;
++          }
++        }
++      }
++      //CPE data pump seems to occasionally send us the same bit swap twice in a row with different sframe counter.
++      //Since these are never counted twice by the debug output of AC5, we should not count them twice either.
++      //So, we ignore the sframe_counter in determining whether the most recent bitswap is a duplicate.
++      if (differentCmd_f)
++      {
++          shim_osMoveMemory((void *)lastAturBitSwapCommands, (void *)ptidsl->dsBitSwap[dsSwapInx].bitSwapCommand, 6);
++          shim_osMoveMemory((void *)lastAturBitSwapBinNum, (void *)ptidsl->dsBitSwap[dsSwapInx].bitSwapBinNum, 6);
++          ptidsl->dsBitSwapInx++;
++          if (ptidsl->dsBitSwapInx > 29)
++            ptidsl->dsBitSwapInx = 0;
++      }
++    }
++  }
++#endif
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++  else
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_gatherEocMessages()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced EOC Buffering functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_gatherEocMessages(tidsl_t *ptidsl,int usDs, int msgPart1, int msgPart2)
++{
++  int rc=0;
++#ifndef NO_ACT
++  rc = dslhal_advcfg_logEocMessages(ptidsl,usDs, msgPart1, msgPart2);
++#endif
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++  else
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_gatherSnrPerBin()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Snr per bin buffering Functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_gatherSnrPerBin(tidsl_t *ptidsl,unsigned int snrParam)
++{
++  int rc=0;
++#ifndef NO_ACT
++  rc = dslhal_advcfg_getSnrPerBin(ptidsl,snrParam);
++#endif
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++  else
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_processTrainingState()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Training State Processing Functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_processTrainingState(tidsl_t *ptidsl)
++{
++  int rc=0;
++#ifndef NO_ACT
++
++  if(ptidsl->trainStateInx<120)
++    {
++     rc = dslhal_advcfg_getTrainingState(ptidsl,(void *)&ptidsl->trainHistory[ptidsl->trainStateInx++]);
++     if(ptidsl->trainHistory[(ptidsl->trainStateInx-1)].subStateIndex ==
++        ptidsl->trainHistory[(ptidsl->trainStateInx-2)].subStateIndex)
++        ptidsl->trainStateInx--;
++    }
++  else
++      ptidsl->trainStateInx = 0;
++#endif
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++  else
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_gatherAdsl2Messages()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Gathers ADSL2 Training Messages
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_gatherAdsl2Messages(tidsl_t *ptidsl,int tag, int param1, int param2)
++{
++  int rc=0;
++  unsigned int adsl2MsgLoc;
++  switch(tag)
++    {
++    case CMSGFMT_INDEX:
++       dprintf(5,"C-Msg-FMT rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSGFMT_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.cMsgFmt,CMSGFMT_SIZE);
++       break;
++    case RMSGFMT_INDEX:  
++    case RMSGFMT2_INDEX:
++       dprintf(5,"R-Msg-FMT rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSGFMT_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.rMsgFmt,RMSGFMT_SIZE);
++       break;
++    case CMSGPCB_INDEX:
++       dprintf(5,"C-Msg-PCB rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSGPCB_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB_SIZE);
++       ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB_SIZE;
++       break;
++    case CMSGPCB2_INDEX:  
++       dprintf(5,"C-Msg-PCB2 rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSGPCB2_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB2_SIZE);
++       ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB2_SIZE;
++#ifndef NO_ACT
++       rc += dslhal_advcfg_setBlackOutBits(ptidsl);
++#endif
++       break;
++    case CMSGPCB2L_INDEX:
++       dprintf(5,"C-Msg-PCB2L rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSGPCB2L_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB2L_SIZE);
++       ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB2L_SIZE;
++       break;
++    case RMSGPCB_INDEX:
++    case RMSGPCB2L_INDEX:
++       dprintf(5,"R-Msg-PCB rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSGPCB_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.rMsgPcb,RMSGPCB_SIZE);
++       ptidsl->adsl2TrainingMessages.rMsgPcbLen = RMSGPCB_SIZE;
++       break;
++
++    case CMSG1ADSL2_INDEX:
++       dprintf(5,"C-Msg1 rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSG1ADSL2_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.cMsg1,CMSG1ADSL2_SIZE);
++       ptidsl->adsl2TrainingMessages.cMsg1Len = CMSG1ADSL2_SIZE;
++       break;
++    case CMSG2ADSL2_INDEX:
++       dprintf(5,"C-Msg2 rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSG2ADSL2_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.cMsg2,CMSG2ADSL2_SIZE);
++       ptidsl->adsl2TrainingMessages.cMsg2Len = CMSG2ADSL2_SIZE;
++       break;
++    case RMSG1ADSL2_INDEX:
++       dprintf(5,"R-Msg1 rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG1ADSL2_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.rMsg1,RMSG1ADSL2_SIZE);
++       ptidsl->adsl2TrainingMessages.rMsg1Len = RMSG1ADSL2_SIZE;
++       break;
++    case RMSG2ADSL2_INDEX:
++       dprintf(5,"R-Msg2 rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG2ADSL2_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.rMsg2,RMSG2ADSL2_SIZE);
++       ptidsl->adsl2TrainingMessages.rMsg2Len = RMSG2ADSL2_SIZE;
++       break;
++    case CPARAMS_INDEX:
++       dprintf(5,"C-Params rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CPARAMS_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.cParams,CPARAMS_SIZE);
++       ptidsl->adsl2TrainingMessages.cParamsLen = CPARAMS_SIZE;
++       break;
++    case RPARAMS_INDEX:
++       dprintf(5,"R-Params rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RPARAMS_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2TrainingMessages.rParams,RPARAMS_SIZE);
++       ptidsl->adsl2TrainingMessages.rParamsLen = RPARAMS_SIZE;
++       break;
++    case RMSG1LD_INDEX:
++       dprintf(5,"R-Msg1 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG1LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg1Ld,RMSG1LD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsg1LdLen = RMSG1LD_SIZE;
++       break;
++    case RMSG2LD_INDEX:
++       dprintf(5,"R-Msg2 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG2LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg2Ld,RMSGxLD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
++       break;
++    case RMSG3LD_INDEX:
++       dprintf(5,"R-Msg3 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG3LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg3Ld,RMSGxLD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
++       break;
++    case RMSG4LD_INDEX:
++       dprintf(5,"R-Msg4 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG4LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg4Ld,RMSGxLD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
++       break;
++    case RMSG5LD_INDEX:
++       dprintf(5,"R-Msg5 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG5LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg5Ld,RMSGxLD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
++       break;
++    case RMSG6LD_INDEX:
++       dprintf(5,"R-Msg6 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG6LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg6Ld,RMSGxLD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
++       break;
++    case RMSG7LD_INDEX:
++       dprintf(5,"R-Msg7 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG7LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg7Ld,RMSGxLD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
++       break;
++    case RMSG8LD_INDEX:
++       dprintf(5,"R-Msg8 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG8LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg8Ld,RMSGxLD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
++       break;
++    case RMSG9LD_INDEX:
++       dprintf(5,"R-Msg9 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, RMSG9LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.rMsg9Ld,RMSGxLD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
++       break;
++    case CMSG1LD_INDEX:
++       dprintf(5,"C-Msg1 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSG1LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.cMsg1Ld,CMSG1LD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.cMsg1LdLen = CMSG1LD_SIZE;
++       break;
++    case CMSG2LD_INDEX:
++       dprintf(5,"C-Msg2 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSG2LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.cMsg2Ld,CMSG2LD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.cMsg2LdLen = CMSG2LD_SIZE;
++       break;
++    case CMSG3LD_INDEX:
++       dprintf(5,"C-Msg3 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSG3LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.cMsg3Ld,CMSG3LD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.cMsg3LdLen = CMSG3LD_SIZE;
++       break;
++    case CMSG4LD_INDEX:
++       dprintf(5,"C-Msg4 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSG4LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.cMsg4Ld,CMSG4LD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.cMsg4LdLen = CMSG4LD_SIZE;
++       break;
++    case CMSG5LD_INDEX:
++       dprintf(5,"C-Msg5 LD rec'd\n");
++       adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
++                     (ptidsl, CMSG5LD_INDEX);
++       rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
++             ptidsl->adsl2DiagnosticMessages.cMsg5Ld,CMSG5LD_SIZE);
++       ptidsl->adsl2DiagnosticMessages.cMsg5LdLen = CMSG5LD_SIZE;
++       break;
++    default:
++       dprintf(5,"Unknown ADSL2 Message rec'd\n");
++       break;
++    }
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++  else
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_getAdsl2MessageLocation()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Gets the address to the ADSL2 Message being looked up
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_getAdsl2MessageLocation(tidsl_t *ptidsl,int msgOffset)
++{
++  int rc=0;
++
++  DEV_HOST_dspOamSharedInterface_t *pSharedInterface, sharedInterface;  
++  DEV_HOST_dspWrNegoParaDef_t   dspNegoPara;
++  int  adsl2MsgString, adsl2MsgAddr;
++
++  pSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
++  rc += dslhal_support_blockRead(pSharedInterface, &sharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++  sharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_adsl2ByteSwap32((unsigned int)sharedInterface.dspWriteNegoParams_p);
++  rc += dslhal_support_blockRead((PVOID)sharedInterface.dspWriteNegoParams_p,&dspNegoPara, sizeof(DEV_HOST_dspWrNegoParaDef_t));
++  
++  if (rc)
++    {
++    dprintf(1,"dslhal_support_blockRead failed\n");
++    return DSLHAL_ERROR_BLOCK_READ;
++    }
++
++  adsl2MsgString = dslhal_support_adsl2ByteSwap32((unsigned int)dspNegoPara.adsl2DeltMsgs_p);
++  dprintf(5,"ADSL2 Message String Address: 0x%x\n",adsl2MsgString);
++  rc += dslhal_support_blockRead((PVOID)(adsl2MsgString +
++                                  ((sizeof(unsigned char *)*msgOffset))),
++                                  &adsl2MsgAddr, sizeof(int));
++  adsl2MsgAddr = dslhal_support_adsl2ByteSwap32((unsigned int)adsl2MsgAddr);
++  dprintf(5," Message Address: 0x%x\n",adsl2MsgAddr);
++
++       if(rc)
++          return DSLHAL_ERROR_BLOCK_READ;
++       else
++          return adsl2MsgAddr;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_getCMsgsRa()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Training Message functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_getCMsgsRa(tidsl_t *ptidsl,void *cMsg)
++{
++  int rc=0;
++  DEV_HOST_raMsgsDef_t         raMsgParms;
++  DEV_HOST_dspOamSharedInterface_t  dspOamSharedInterface;
++  rc += dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++
++  dspOamSharedInterface.raMsgs_p = (DEV_HOST_raMsgsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.raMsgs_p);
++
++  rc += dslhal_support_blockRead((PVOID)dspOamSharedInterface.raMsgs_p, 
++                               &raMsgParms, sizeof(DEV_HOST_raMsgsDef_t));
++  shim_osMoveMemory((void *)cMsg,(void *)raMsgParms.cMsgsRaString,6);
++  
++  if(rc)
++    return DSLHAL_ERROR_CONFIG_API_FAILURE;
++  else
++    return DSLHAL_ERROR_NO_ERRORS;
++}
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_gatherRateMessages()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*        Gathers Rate Training Messages
++* Input
++*        tidsl_t *ptidsl : Pointer to application structure
++*        
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_gatherRateMessages(tidsl_t * ptidsl)
++{
++  int rc;
++  DEV_HOST_dspWrNegoParaDef_t  negoParms;
++  DEV_HOST_dspOamSharedInterface_t  dspOamSharedInterface;
++  
++  dprintf(1, "dslhal_support_gatherRateMessages\n");
++
++  rc += dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
++  dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
++
++  rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p, &negoParms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
++  if (rc)
++    return DSLHAL_ERROR_BLOCK_READ;  
++  else 
++    {
++      shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)negoParms.cRates1, 120);
++      shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)negoParms.rRates1, 44);
++    }
++return DSLHAL_ERROR_NO_ERRORS;
++}
++
++static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits)
++{
++    int out32Bits=0; 
++
++#ifdef EB
++  out32Bits = (in32Bits << 24);
++  out32Bits |=((in32Bits & 0x0000ff00) << 8);
++  out32Bits |=((in32Bits & 0xff000000) >> 24);
++  out32Bits |=((in32Bits & 0x00ff0000) >> 8);    
++#else
++    out32Bits = in32Bits;
++#endif
++    
++    return out32Bits;
++
++} /* end of dslhal_support_byteSwap32() */
+diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_support.h linux.dev/drivers/atm/sangam_atm/dsl_hal_support.h
+--- linux.old/drivers/atm/sangam_atm/dsl_hal_support.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dsl_hal_support.h	2005-08-23 04:46:50.101843088 +0200
+@@ -0,0 +1,718 @@
++#ifndef DSL_HAL_SUPPORT_H__
++#define DSL_HAL_SUPPORT_H__ 1
++
++/*******************************************************************************
++* FILE PURPOSE:     DSL Driver API functions for Sangam
++*
++********************************************************************************
++* FILE NAME:        dsl_hal_functiondefines.c
++*
++* DESCRIPTION:  
++*       Contains basic DSL HAL API declarations for Sangam
++*  
++*                    
++* (C) Copyright 2001-02, Texas Instruments, Inc.
++*    History
++*    Date        Version            Notes
++*    06Feb03     0.00.00            RamP   Created
++*    21Mar03     0.00.01            RamP   Removed byteswap functions
++*    21Mar03     0.00.02            RamP   Added extern osFreeVMemory declaration
++*    10Apr03     0.00.03            RamP   Changed declaration for loadFWImage &
++*                                          loadDebugFWImage to remove ptidsl param
++*    12Apr03     0.00.04            RamP   Added function to set Interrupt Bit
++*                                          Masks for bitfield & Mailboxes
++*    14Apr03     0.00.05            RamP   Added modem state bit field processing
++*    15Apr03     0.00.06            RamP   Added function osAllocateVMemory
++*    21Apr03     0.01.00            RamP   Added function osAllocateDmaMemory
++*                                          Added function osFreeDmaMemory
++*                (Alpha)                   Added macro virtual2Physical, 
++*    22Apr03     0.01.01            RamP   Moved acknowledgeInterrupt to api.h
++*    24Apr03     0.01.02            RamP   Added checkOvelayPage function
++*    29May03     0.01.03            RamP   Added critical enter/exit function decl
++*    06Jun03     0.01.04            RamP   Added Interrupt source parsing function
++*    06Oct03     0.01.05            RamP   Added function abstraction switches
++*    12Oct03     0.01.06            RamP   Added ADSL2 Message function prototypes
++*    14Nov03     0.03.07            RamP   Added function to gather Rate Messages
++*******************************************************************************/
++
++#include "dsl_hal_api.h"
++
++#define virtual2Physical(a)    (((int)a)&~0xe0000000)
++/* External Function Prototype Declarations */
++
++extern unsigned int shim_osGetCpuFrequency(void);
++extern void shim_osClockWait(int val);
++extern unsigned int shim_osClockTick(void);
++
++extern int shim_osStringCmp(const char *s1, const char *s2);
++
++extern void dprintf( int uDbgLevel, char * szFmt, ...);
++
++extern int shim_osLoadFWImage(unsigned char *firmwareImage);
++extern int shim_osLoadDebugFWImage(unsigned char *debugFirmwareImage);
++extern unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength);
++extern void shim_osMoveMemory(char *dst, char *src, unsigned int numBytes);
++extern void shim_osZeroMemory(char *dst, unsigned int numBytes);
++
++extern void *shim_osAllocateMemory(unsigned int size);
++extern void *shim_osAllocateVMemory(unsigned int size);
++extern void *shim_osAllocateDmaMemory(unsigned int size);
++
++extern void shim_osFreeMemory(void *ptr, unsigned int size);
++extern void shim_osFreeVMemory(void *ptr, unsigned int size);
++extern void shim_osFreeDmaMemory(void *ptr, unsigned int size);
++
++extern void shim_osWriteBackCache(void *pMem, unsigned int size);
++extern void shim_osCriticalEnter(void);
++extern void shim_osCriticalExit(void);
++
++
++/*******************************************************************************************
++* FUNCTION NAME:    dslhal_support_writeHostMailbox
++*
++********************************************************************************************
++* DESCRIPTION: Send a message to a mailbox
++*
++* ARGUMENTS:   int cmd             command to write
++*              int tag             tag (currently unused)
++*              int p1              parameter 1 (currently unused)
++*              int p2              parameter 2 (currently unused)
++*
++* RETURNS:     0 if successful
++*              NZ otherwise
++*
++*******************************************************************************************/
++
++int dslhal_support_writeHostMailbox
++(tidsl_t *ptidsl, 
++ int cmd, 
++ int tag, 
++ int p1, 
++ int p2);
++
++/********************************************************************************************
++* FUNCTION NAME:    dslhal_support_readDspMailbox
++*
++*********************************************************************************************
++* DESCRIPTION: Reads a message from the mailbox
++*
++* ARGUMENTS:   int *pcmd           Pointer to command read
++*
++* RETURNS:     0 if successful
++*              1 if no mail
++*              NZ otherwise
++*
++*****************************************************************************************/
++
++int dslhal_support_readDspMailbox
++(tidsl_t *ptidsl, 
++ int *pcmd, 
++ int *ptag, 
++ int *pprm1, 
++ int *pprm2);
++
++/********************************************************************************************
++* FUNCTION NAME:    dslhal_support_readTextMailbox
++*
++*********************************************************************************************
++* DESCRIPTION: Reads a message from the mailbox
++*
++* ARGUMENTS:   int *pcmd           Pointer to command read
++*
++* RETURNS:     0 if successful
++*              1 if no mail
++*              NZ otherwise
++*
++*****************************************************************************************/
++
++int dslhal_support_readTextMailbox
++(tidsl_t *ptidsl, 
++ int *pmsg1, 
++ int *pmsg2);
++ 
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_blockRead
++*
++*********************************************************************************************
++* DESCRIPTION: This rouin simulates DSP memory read as done in ax5 pci nic card
++*
++* INPUT:  void *addr,   memory address to be read
++*         void *buffer, dat buffer to be filled with from memmory
++*         size_t count, number of bytes to be written
++*
++* RETURN:  0 --succeeded
++*          1 --Failed
++*
++*****************************************************************************************/
++
++int dslhal_support_blockRead
++(void *addr, 
++ void *buffer, 
++ size_t count);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_blockWrite
++*
++*******************************************************************************************
++* DESCRIPTION: This rouin simulates DSP memory write as done in ax5 pci nic card 
++*
++* INPUT:  void *buffer, data need to written
++*         void *adde,   memory address to be written
++*         size_t count, number of bytes to be written
++*
++* RETURN:  0 --succeeded
++*          1 --Failed
++*
++*****************************************************************************************/
++
++int dslhal_support_blockWrite
++(void *buffer, 
++ void *addr, 
++ size_t count);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_hostDspAddressTranslate
++*
++*******************************************************************************************
++* DESCRIPTION: This function moves the address window to translate physical address 
++*
++* INPUT:  unsigned int addr : address that requires translation
++*
++* RETURN:  Translated address or error condition
++*          
++*
++*****************************************************************************************/
++
++unsigned int dslhal_support_hostDspAddressTranslate
++( unsigned int addr 
++);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_unresetDslSubsystem
++*
++*******************************************************************************************
++* DESCRIPTION: This function unreset Dsl Subsystem
++*
++* INPUT:  None
++*
++* RETURN: 0 if Pass; 1 if Fail
++*
++*****************************************************************************************/
++int dslhal_support_unresetDslSubsystem
++(void
++);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_unresetDsp()
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
++*
++* INPUT:  None
++*
++* RETURN: 0  --successful.
++*         1  --failed
++*
++*****************************************************************************************/
++int dslhal_support_unresetDsp
++(void
++);
++
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_resetDslSubsystem
++*
++*******************************************************************************************
++* DESCRIPTION: This function unreset Dsl Subsystem
++*
++* INPUT:  None
++*
++* RETURN: 0 if Pass; 1 if Fail
++*
++*****************************************************************************************/
++int dslhal_support_resetDslSubsystem
++(void
++);
++
++/******************************************************************************************
++* FUNCTION NAME:    dslhal_support_resetDsp()
++*
++*******************************************************************************************
++* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
++*
++* INPUT:  None
++*
++* RETURN: 0  --successful.
++*         1  --failed
++*
++*****************************************************************************************/
++int dslhal_support_resetDsp
++(void
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_hostDspCodeDownload()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   download DSP image from host memory to dsp memory
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++int dslhal_support_hostDspCodeDownload
++(tidsl_t * ptidsl 
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_digi_assignMemTestSpace()
++*
++*********************************************************************************************
++* DESCRIPTION: Assigns Memory Space in SDRAM for External Memory Test 
++* Input: tidsl_t *ptidsl
++* 
++* Return: 0    success
++*         1    failed
++*
++********************************************************************************************/
++
++unsigned int dslhal_diags_digi_assignMemTestSpace
++(tidsl_t *ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_digi_readMemTestResult()
++*
++*********************************************************************************************
++* DESCRIPTION: Reads Results of External Memory Test 
++* Input: tidsl_t *ptidsl
++* 
++* Return: 0    success
++*         1    failed
++*
++********************************************************************************************/
++
++unsigned int dslhal_diags_digi_readMemTestResult
++(tidsl_t *ptidsl,
++unsigned int testResult
++);
++
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_codeDownload()
++*
++*********************************************************************************************
++* DESCRIPTION: Brings DSLSS out of Reset, Downloads Diag Firmware, 
++*              brings DSP out of Reset 
++* Input: tidsl_t *ptidsl
++* 
++* Return: 0    success
++*         1    failed
++*
++********************************************************************************************/
++
++unsigned int dslhal_diags_codeDownload
++(tidsl_t *ptidsl,
++unsigned char* missingTones
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_anlg_setPgaParams()
++*
++*********************************************************************************************
++* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
++*              tones and Medley's with missing tones. These signals are defined in ITU 
++*              G.992.1 ADSL Standards.
++*
++* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
++*        Tones selects the .
++* Return: NULL
++*         
++********************************************************************************************/
++
++unsigned int  dslhal_diags_anlg_setPgaParams
++(tidsl_t *ptidsl,
++int agcFlag,
++short pga1, 
++short pga2, 
++short pga3, 
++short aeq
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_anlg_getRxNoisePower()
++*
++*********************************************************************************************
++* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
++*              tones and Medley's with missing tones. These signals are defined in ITU 
++*              G.992.1 ADSL Standards.
++*
++* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
++*        Tones selects the .
++* Return: NULL
++*         
++********************************************************************************************/
++
++unsigned int dslhal_diags_anlg_getRxNoisePower
++(tidsl_t *ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_diags_anlg_setMissingTones()
++*
++*********************************************************************************************
++* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
++*              tones and Medley's with missing tones. These signals are defined in ITU 
++*              G.992.1 ADSL Standards.
++*
++* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
++*        Tones selects the .
++* Return: NULL
++*         
++********************************************************************************************/
++
++unsigned int dslhal_diags_anlg_setMissingTones
++(tidsl_t *ptidsl,
++unsigned char* missingTones
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_readDelineationState()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   download DSP image from host memory to dsp memory
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_readDelineationState
++(tidsl_t *ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_processModemStateBitField()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   download DSP image from host memory to dsp memory
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_processModemStateBitField
++(tidsl_t *ptidsl
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_setInterruptMask()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++unsigned int dslhal_support_setInterruptMask
++(tidsl_t * ptidsl,
++unsigned int inputMask
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_computeCrc32()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data
++*
++* Return: 32 bit CRC of the input data
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_computeCrc32
++(unsigned char *data, 
++int len
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_checkOverlayPage()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data and compares it with reference
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_checkOverlayPage
++(tidsl_t *ptidsl, 
++unsigned int tag
++);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_restoreTrainingInfo()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data and compares it with reference
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++int dslhal_support_restoreTrainingInfo(tidsl_t * ptidsl);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_reloadTrainingInfo()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data and compares it with reference
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++int dslhal_support_reloadTrainingInfo(tidsl_t * ptidsl);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_clearTrainingInfo()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Computes the CRC-32 for the input data and compares it with reference
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++int dslhal_support_clearTrainingInfo(tidsl_t * ptidsl);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_parseInterruptSource()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Sets the host interrupt bit masks
++*
++* Return: 0  success
++*         1  failed
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++
++unsigned int dslhal_support_parseInterruptSource(tidsl_t * ptidsl);
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_advancedIdleProcessing()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Idle State Processing Functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_advancedIdleProcessing(tidsl_t *ptidsl);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_aocBitSwapProcessing()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Bitswap buffer Processing Functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_aocBitSwapProcessing(tidsl_t *ptidsl,unsigned int usDs);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_gatherEocMessages()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced EOC Buffering functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_gatherEocMessages(tidsl_t *ptidsl,int usDs, int msgPart1, int msgPart2);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_gatherSnrPerBin()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Snr per bin buffering Functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_gatherSnrPerBin(tidsl_t *ptidsl,unsigned int snrParm);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_processTrainingState()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Training State Processing Functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_processTrainingState(tidsl_t *ptidsl);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_gatherAdsl2Messages()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced EOC Buffering functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_gatherAdsl2Messages(tidsl_t *ptidsl,int msgTag, int param1, int param2);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_getAdsl2MsgLocation()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Gets the address to the ADSL2 Message being looked up
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_getAdsl2MessageLocation(tidsl_t *ptidsl,int msgOffset);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_getCMsgsRa()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Calls Advanced Training Message functions
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_getCMsgsRa(tidsl_t *ptidsl,void *cMsg);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_gatherRateMessages()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   Gathers Advanced Training Messages
++*
++* Return: Error Condition (if any)
++*      
++* 
++* NOTE: 
++*   DSP image is based on LITTLE endian
++*
++********************************************************************************************/
++unsigned int dslhal_support_gatherRateMessages(tidsl_t *ptidsl);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_byteSwap16()
++*
++*********************************************************************************************
++* DESCRIPTION:
++* byteswap a short  
++* 
++* INPUT: 
++* Return: NULL
++*
++********************************************************************************************/
++
++unsigned short dslhal_support_byteSwap16(unsigned short in16Bits);
++
++/********************************************************************************************
++* FUNCTION NAME: dslhal_support_byteSwap32()
++*
++*********************************************************************************************
++* DESCRIPTION:
++*   byteswap a word
++* 
++* INPUT: 
++* Return: NULL
++*
++********************************************************************************************/
++
++unsigned int dslhal_support_byteSwap32(unsigned int in32Bits);
++
++#endif /* Pairs #ifndef DSL_HAL_FUNCTIONDEFINES_H__ */
+diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_version.h linux.dev/drivers/atm/sangam_atm/dsl_hal_version.h
+--- linux.old/drivers/atm/sangam_atm/dsl_hal_version.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/dsl_hal_version.h	2005-08-23 04:46:50.102842936 +0200
+@@ -0,0 +1,94 @@
++#ifndef __SYSSW_VERSION_H__
++#define __SYSSW_VERSION_H__ 1
++
++/*******************************************************************************
++* FILE PURPOSE:     DSL Driver API functions for Sangam
++*
++********************************************************************************
++* FILE NAME:        dsl_hal_basicapi.c
++*
++* DESCRIPTION:  
++*       Contains basic DSL HAL APIs for Sangam
++*  
++* (C) Copyright 2003-04, Texas Instruments, Inc.
++*    History
++*    Date        Version            Notes
++*    14May03     0.00.00            RamP   Original Version Created
++*    14May03     0.00.01            RamP   Initial Rev numbers inserted 
++*    14May03     0.00.02            RamP   Bumped version numbers for Dsl Hal
++*                                          & dhalapp for alpha plus
++*    19May03     0.00.03            MCB    Bumped dslhal version number
++*                                          because of dependant changes
++*                                          wrt. linux-nsp atm drivers.
++*    22May03     0.00.04            RamP   Bumped dslhal & dhalapp buildnum
++*                                          for inner/outer pair & DGASP code
++*    06Jun03     0.00.05            RamP   Bumped up buildnum for LED, STM, 
++*                                          interrupt processing, statistics
++*                                          and other pre-beta features
++*    09Jun03     0.00.06            JEB    Fixed error in DHALAPP bugfix/buildnum
++*    09Jun03     0.00.07            RamP   Bumped up buildnum for incremental
++*                                          changes to apis, statistics, memory
++*                                          fixes, parameter configurations
++*    11Jun03     0.00.08            RamP   Bumped up buildnum for Co profile
++*                                          free memory fix
++*    12Jun03     0.00.09            JEB    Bumped version numbers for AR7 1.00 Beta
++*    02Jul03     0.00.10            ZT     Bumped HAL version for overlay page
++*    18Jul03     0.00.11            RamP   Bumped HAL version for analog diags
++*    22Jul03     0.00.12            JEB    Bumped DHALAPP buildnum for analog diags
++*    31Jul03     0.00.13            RamP   Bumped HAL version for engr. drop
++*    04Aug03     0.00.14            JEB    Bumped HAL version buildnum for CHECKPOINT65 changes
++*                                          Bumped LINUX version buildnum for CHECKPOINT65 changes
++*    06Aug03     0.00.15            MCB    Bumped all version numbers in prep for AR7 1.0 R2 release for POTS.
++*    13Aug03     0.00.16            MCB    Set rev id's for D3/R1.1 (ADSL2).
++*    21Aug03     0.00.17            JEB    Bumped up build numbers for merge of code additions from D1
++*    26Sep03     0.00.18            JEB    Set rev id's for another D3/R1 (ADSL2).
++*    14Oct03     0.00.19            JEB    Bumped Linux minor number and reset bugfix number for release.
++*                                          Bumped build numbers on DSLHAL and DHALAPP for this checkpoint.
++*    14Oct03     0.00.20            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT15.
++*    21Oct03     0.00.21            JEB    Bumped build number on DSLHAL for CHECKPOINT16.
++*    22Oct03     0.00.22            MCB    Bumped all version numbers in support of D3R1 release.
++*    27Oct03     0.00.23            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT19.
++*                                          Updated version for DSLAGENT to be 02.01.00.01 for ACT 2.1 R0.
++*    30Oct03     0.00.24            JEB    Bumped bugfix number on LINUXATM Version for next release.
++*                                          Bumped build numbers on DSLHAL and DHALAPP
++*    31Oct03     0.00.25            MCB    Bumped all version numbers in support of D3R2 release.
++*    14Nov03     0.00.26            JEB    Bumped build numbers on DSLHAL and DHALAPP
++*                                          Changed version for DSLAGENT to be 02.00.01.01 for an ACT 2.0 R0
++*    20Nov03     0.00.27            JEB    Bumped build number on DSLHAL.
++*                                          Changed version for DSLAGENT to be 02.00.02.00 for the next ACT 2.0 R2
++*    21Nov03     0.00.28            MCB    Bumped all version numbers in support of D3R2 release.
++*    21Nov03     0.00.29            JEB    Bumped build numbers on DSLHAL and DHALAPP for D3-R0 drop on 11/21.
++*    16Dec03     0.00.30            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT31.
++*    21Dec03     0.00.31            MCB    Bumped all version numbers in support of D3R2 release.
++*    05Jan04     0.00.32            JEB    Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 34.
++*    15Jan04     0.00.33            JEB    Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 36.
++*    26Jan04     0.00.34            JEB    Changed Linux ATM version number to be 04.02.03.00.
++*    27Jan04     0.00.35            MCB    Bumped all version numbers in support of D3R2 release.
++*******************************************************************************/
++
++/* Dsl Hal API Version Numbers */
++#define DSLHAL_VERSION_MAJOR       03
++#define DSLHAL_VERSION_MINOR       00
++#define DSLHAL_VERSION_BUGFIX      06
++#define DSLHAL_VERSION_BUILDNUM    00
++#define DSLHAL_VERSION_TIMESTAMP   00
++
++/* dhalapp Adam2 Application Version Numbers */
++#define DHALAPP_VERSION_MAJOR      03
++#define DHALAPP_VERSION_MINOR      00
++#define DHALAPP_VERSION_BUGFIX     05
++#define DHALAPP_VERSION_BUILDNUM   00
++
++/* Linux ATM Driver Version Numbers */
++#define LINUXATM_VERSION_MAJOR     04
++#define LINUXATM_VERSION_MINOR     02
++#define LINUXATM_VERSION_BUGFIX    04
++#define LINUXATM_VERSION_BUILDNUM  00
++
++/* DSL Agent Version Numbers */
++#define DSLAGENT_VERSION_MAJOR     02
++#define DSLAGENT_VERSION_MINOR     00
++#define DSLAGENT_VERSION_BUGFIX    02
++#define DSLAGENT_VERSION_BUILDNUM  00
++
++#endif /* pairs with #ifndef __SYSSW_VERSION_H__ */
+diff -urN linux.old/drivers/atm/sangam_atm/ec_errors_cpaal5.h linux.dev/drivers/atm/sangam_atm/ec_errors_cpaal5.h
+--- linux.old/drivers/atm/sangam_atm/ec_errors_cpaal5.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/ec_errors_cpaal5.h	2005-08-23 04:46:50.102842936 +0200
+@@ -0,0 +1,118 @@
++/***************************************************************************
++ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
++
++ FILE:  ec_errors.h
++
++ DESCRIPTION:
++   This file contains definitions and function declarations for
++   error code support.
++
++ HISTORY:
++   14Dec00 MJH             Added masking to EC_CLASS etc macros
++   17Sep02 GSG             Added HAL support (new class&devices)
++   03Oct02 GSG             Removed C++ style comments
++***************************************************************************/
++#ifndef _INC_EC_ERRORS
++#define _INC_EC_ERRORS
++
++/*
++  31    - CRITICAL
++  30-28 - CLASS         (ie. DIAG, KERNEL, FLASH, etc)
++  27-24 - INSTANCE      (ie. 1, 2, 3, etc )
++  23-16 - DEVICE        (ie. EMAC, IIC, etc)
++  15-08 - FUNCTION      (ie. RX, TX, INIT, etc)
++  07-00 - ERROR CODE    (ie. NO_BASE, FILE_NOT_FOUND, etc )
++*/
++
++/*---------------------------------------------------------------------------
++  Useful defines for accessing fields within error code
++---------------------------------------------------------------------------*/
++#define CRITICAL_SHIFT    31
++#define CLASS_SHIFT       28
++#define INST_SHIFT        24
++#define DEVICE_SHIFT      16
++#define FUNCTION_SHIFT     8
++#define ERROR_CODE_SHIFT   0
++
++#define CRITICAL_MASK     1
++#define CLASS_MASK        0x07
++#define DEVICE_MASK       0xFF
++#define INST_MASK         0x0F
++#define FUNCTION_MASK     0xFF
++#define ERROR_CODE_MASK   0xFF
++
++#define EC_CLASS(val)     ((val&CLASS_MASK)      << CLASS_SHIFT)
++#define EC_DEVICE(val)    ((val&DEVICE_MASK)     << DEVICE_SHIFT)
++#define EC_INST(val)      ((val&INST_MASK)       << INST_SHIFT)
++#define EC_FUNC(val)      ((val&FUNCTION_MASK)   << FUNCTION_SHIFT)
++#define EC_ERR(val)       ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
++
++/*---------------------------------------------------------------------------
++   Operation classes
++---------------------------------------------------------------------------*/
++#define EC_HAL              EC_CLASS(0)
++#define EC_DIAG             EC_CLASS(8)
++
++/*---------------------------------------------------------------------------
++   Device types
++---------------------------------------------------------------------------*/
++#define EC_DEV_EMAC         EC_DEVICE(1)
++#define EC_DEV_IIC          EC_DEVICE(2)
++#define EC_DEV_RESET        EC_DEVICE(3)
++#define EC_DEV_ATMSAR       EC_DEVICE(4)
++#define EC_DEV_MEM          EC_DEVICE(5)
++#define EC_DEV_DES          EC_DEVICE(6)
++#define EC_DEV_DMA          EC_DEVICE(7)
++#define EC_DEV_DSP          EC_DEVICE(8)
++#define EC_DEV_TMR          EC_DEVICE(9)
++#define EC_DEV_WDT          EC_DEVICE(10)
++#define EC_DEV_DCL          EC_DEVICE(11)
++#define EC_DEV_BBIF         EC_DEVICE(12)
++#define EC_DEV_PCI              EC_DEVICE(13)
++#define EC_DEV_XBUS         EC_DEVICE(14)
++#define EC_DEV_DSLIF            EC_DEVICE(15)
++#define EC_DEV_USB                      EC_DEVICE(16)
++#define EC_DEV_CLKC                     EC_DEVICE(17)
++#define EC_DEV_RAPTOR       EC_DEVICE(18)
++#define EC_DEV_DSPC                     EC_DEVICE(19)
++#define EC_DEV_INTC                     EC_DEVICE(20)
++#define EC_DEV_GPIO                     EC_DEVICE(21)
++#define EC_DEV_BIST                     EC_DEVICE(22)
++#define EC_DEV_HDLC                     EC_DEVICE(23)
++#define EC_DEV_UART                     EC_DEVICE(24)
++#define EC_DEV_VOIC                     EC_DEVICE(25)
++/* 9.17.02 (new HAL modules) */
++#define EC_DEV_CPSAR        EC_DEVICE(0x1A)
++#define EC_DEV_AAL5         EC_DEVICE(0x1B)
++#define EC_DEV_AAL2         EC_DEVICE(0x1C)
++#define EC_DEV_CPMAC        EC_DEVICE(0x1D)
++#define EC_DEV_VDMA         EC_DEVICE(0x1E)
++#define EC_DEV_VLYNQ        EC_DEVICE(0x1F)
++#define EC_DEV_CPPI         EC_DEVICE(0x20)
++#define EC_DEV_CPMDIO       EC_DEVICE(0x21)
++
++/*---------------------------------------------------------------------------
++   Function types
++---------------------------------------------------------------------------*/
++#define EC_FUNC_READ_CONF   EC_FUNC(1)
++#define EC_FUNC_INIT        EC_FUNC(2)
++
++/*---------------------------------------------------------------------------
++   Error codes
++---------------------------------------------------------------------------*/
++#define EC_CRITICAL         (1<<CRITICAL_SHIFT)
++#define EC_NO_ERRORS        0
++#define EC_VAL_NO_BASE      EC_ERR(1)
++#define EC_VAL_NO_RESET_BIT EC_ERR(2)
++#define EC_VAL_NO_RESET     EC_ERR(3)
++#define EC_VAL_BAD_BASE     EC_ERR(4)
++#define EC_VAL_MALLOCFAILED EC_ERR(5)
++#define EC_VAL_NO_RESETBASE EC_ERR(6)
++#define EC_DEVICE_NOT_FOUND EC_ERR(7)
++
++/*---------------------------------------------------------------------------
++   Function declarations
++---------------------------------------------------------------------------*/
++extern void ec_log_error( unsigned int );
++
++#endif /* _INC_EC_ERRORS */
+diff -urN linux.old/drivers/atm/sangam_atm/ec_errors_cpsar.h linux.dev/drivers/atm/sangam_atm/ec_errors_cpsar.h
+--- linux.old/drivers/atm/sangam_atm/ec_errors_cpsar.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/ec_errors_cpsar.h	2005-08-23 04:46:50.102842936 +0200
+@@ -0,0 +1,118 @@
++/***************************************************************************
++ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
++
++ FILE:  ec_errors.h
++
++ DESCRIPTION:
++   This file contains definitions and function declarations for
++   error code support.
++
++ HISTORY:
++   14Dec00 MJH             Added masking to EC_CLASS etc macros
++   17Sep02 GSG             Added HAL support (new class&devices)
++   03Oct02 GSG             Removed C++ style comments
++***************************************************************************/
++#ifndef _INC_EC_ERRORS
++#define _INC_EC_ERRORS
++
++/*
++  31    - CRITICAL
++  30-28 - CLASS         (ie. DIAG, KERNEL, FLASH, etc)
++  27-24 - INSTANCE      (ie. 1, 2, 3, etc )
++  23-16 - DEVICE        (ie. EMAC, IIC, etc)
++  15-08 - FUNCTION      (ie. RX, TX, INIT, etc)
++  07-00 - ERROR CODE    (ie. NO_BASE, FILE_NOT_FOUND, etc )
++*/
++
++/*---------------------------------------------------------------------------
++  Useful defines for accessing fields within error code
++---------------------------------------------------------------------------*/
++#define CRITICAL_SHIFT    31
++#define CLASS_SHIFT       28
++#define INST_SHIFT        24
++#define DEVICE_SHIFT      16
++#define FUNCTION_SHIFT     8
++#define ERROR_CODE_SHIFT   0
++
++#define CRITICAL_MASK     1
++#define CLASS_MASK        0x07
++#define DEVICE_MASK       0xFF
++#define INST_MASK         0x0F
++#define FUNCTION_MASK     0xFF
++#define ERROR_CODE_MASK   0xFF
++
++#define EC_CLASS(val)     ((val&CLASS_MASK)      << CLASS_SHIFT)
++#define EC_DEVICE(val)    ((val&DEVICE_MASK)     << DEVICE_SHIFT)
++#define EC_INST(val)      ((val&INST_MASK)       << INST_SHIFT)
++#define EC_FUNC(val)      ((val&FUNCTION_MASK)   << FUNCTION_SHIFT)
++#define EC_ERR(val)       ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
++
++/*---------------------------------------------------------------------------
++   Operation classes
++---------------------------------------------------------------------------*/
++#define EC_HAL              EC_CLASS(0)
++#define EC_DIAG             EC_CLASS(8)
++
++/*---------------------------------------------------------------------------
++   Device types
++---------------------------------------------------------------------------*/
++#define EC_DEV_EMAC         EC_DEVICE(1)
++#define EC_DEV_IIC          EC_DEVICE(2)
++#define EC_DEV_RESET        EC_DEVICE(3)
++#define EC_DEV_ATMSAR       EC_DEVICE(4)
++#define EC_DEV_MEM          EC_DEVICE(5)
++#define EC_DEV_DES          EC_DEVICE(6)
++#define EC_DEV_DMA          EC_DEVICE(7)
++#define EC_DEV_DSP          EC_DEVICE(8)
++#define EC_DEV_TMR          EC_DEVICE(9)
++#define EC_DEV_WDT          EC_DEVICE(10)
++#define EC_DEV_DCL          EC_DEVICE(11)
++#define EC_DEV_BBIF         EC_DEVICE(12)
++#define EC_DEV_PCI              EC_DEVICE(13)
++#define EC_DEV_XBUS         EC_DEVICE(14)
++#define EC_DEV_DSLIF            EC_DEVICE(15)
++#define EC_DEV_USB                      EC_DEVICE(16)
++#define EC_DEV_CLKC                     EC_DEVICE(17)
++#define EC_DEV_RAPTOR       EC_DEVICE(18)
++#define EC_DEV_DSPC                     EC_DEVICE(19)
++#define EC_DEV_INTC                     EC_DEVICE(20)
++#define EC_DEV_GPIO                     EC_DEVICE(21)
++#define EC_DEV_BIST                     EC_DEVICE(22)
++#define EC_DEV_HDLC                     EC_DEVICE(23)
++#define EC_DEV_UART                     EC_DEVICE(24)
++#define EC_DEV_VOIC                     EC_DEVICE(25)
++/* 9.17.02 (new HAL modules) */
++#define EC_DEV_CPSAR        EC_DEVICE(0x1A)
++#define EC_DEV_AAL5         EC_DEVICE(0x1B)
++#define EC_DEV_AAL2         EC_DEVICE(0x1C)
++#define EC_DEV_CPMAC        EC_DEVICE(0x1D)
++#define EC_DEV_VDMA         EC_DEVICE(0x1E)
++#define EC_DEV_VLYNQ        EC_DEVICE(0x1F)
++#define EC_DEV_CPPI         EC_DEVICE(0x20)
++#define EC_DEV_CPMDIO       EC_DEVICE(0x21)
++
++/*---------------------------------------------------------------------------
++   Function types
++---------------------------------------------------------------------------*/
++#define EC_FUNC_READ_CONF   EC_FUNC(1)
++#define EC_FUNC_INIT        EC_FUNC(2)
++
++/*---------------------------------------------------------------------------
++   Error codes
++---------------------------------------------------------------------------*/
++#define EC_CRITICAL         (1<<CRITICAL_SHIFT)
++#define EC_NO_ERRORS        0
++#define EC_VAL_NO_BASE      EC_ERR(1)
++#define EC_VAL_NO_RESET_BIT EC_ERR(2)
++#define EC_VAL_NO_RESET     EC_ERR(3)
++#define EC_VAL_BAD_BASE     EC_ERR(4)
++#define EC_VAL_MALLOCFAILED EC_ERR(5)
++#define EC_VAL_NO_RESETBASE EC_ERR(6)
++#define EC_DEVICE_NOT_FOUND EC_ERR(7)
++
++/*---------------------------------------------------------------------------
++   Function declarations
++---------------------------------------------------------------------------*/
++extern void ec_log_error( unsigned int );
++
++#endif /* _INC_EC_ERRORS */
+diff -urN linux.old/drivers/atm/sangam_atm/env_def_defines.h linux.dev/drivers/atm/sangam_atm/env_def_defines.h
+--- linux.old/drivers/atm/sangam_atm/env_def_defines.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/env_def_defines.h	2005-08-23 04:46:50.103842784 +0200
+@@ -0,0 +1,926 @@
++#ifndef __ENV_DEF_DEFINES_H__
++#define __ENV_DEF_DEFINES_H__ 1
++
++//********************************************************************
++//*    DMT-BASE ADSL MODEM PROGRAM
++//*    TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
++//*    AMATI CONFIDENTIAL PROPRIETARY
++//*
++//* (c) Copyright May 1999, Texas Instruments Incorporated.
++//*     All Rights Reserved.
++//*
++//*   Property of Texas Instruments Incorporated and Amati Communications Corp.
++//*
++//* Restricted Rights - Use, duplication, or disclosure is subject to
++//* restrictions set forth in TI's and Amati program license agreement and
++//* associated documentation
++//*
++//*********************************************************************
++//*
++//* FILENAME: dpsys_defines.h
++//*
++//* ABSTRACT: This file provides a mechanism for defining standard
++//*           preprocessor flag sets for datapump.
++//*
++//* TARGET:  Non specific.
++//*
++//* TOOLSET:  Non specific.
++//*
++//* ACTIVATION:
++//*
++//* HISTORY:  DATE        AUTHOR         DESCRIPTION
++//*           05/11/99    FLW            Created
++//*           01/21/00    FLW            derfmake changes
++//*           02/07/00    FLW/M.Seidl    added _debug targets
++//*           02/23/00    FLW/M.Barnett  merged in from G.lite branch
++//*           03/03/00    FLW/M.Barnett  added TRELLIS token
++//*           05/11/00    Barnett        Added ap036btp & ap037btp support.
++//*           02/07/00    M.Seidl        added HW_TEQ, HW_DEC and DC_BIAS tokens
++//*           02/28/00    Derf/Seidl     Mod's in support of suppressing compiler warnings for empty source files
++//*           02/28/00    M. Seidl       added SWTC token
++//*           02/28/00    M. Seidl       added ap0501tp and its _debug target
++//*           03/03/00    M. Seidl       added MODPILOT token, ap0307tp_debug has SWDI and FDD enabled
++//*           03/08/00    Jack Huang     Added HWRSDEC token
++//*           03/29/00    Derf/Seidl     Mod's in support Soft-TC and derfmake
++//*           04/10/00    Jack Huang     Added PCIMASTER token
++//*           04/11/00    Jack Huang     Added STBFIX token
++//*           04/24/00    M. Seidl       ap0500tp has OLAYDP turned on, ap0500tp_debug has OLAYDP turned off now
++//*           04/28/00    M.Seidl        added KAPIL token for ap0501tp targets
++//*           06/02/00    P.Sexton       Added OAM_EOC token
++//*           06/06/00    M. Seidl       added au0501tp target
++//*           06/12/00    Michael Seidl  activated h/w TEQ for KAPIL targets, disabled STBFIX for all targets
++//*           06/14/00    Derf           added ap0308tp, alphabetized token lists
++//*           06/16/00    Jack Huang     added au0501tp_debug target
++//*           06/22/00    M. Seidl       Enabled code overlays through EMIF from external memory. Now there are 3
++//*                                      different code overlay schemes that are differentiated by the following tokens:
++//*                                      OLAYDP_PCI:  uses PCI DMA in PCI Master Mode
++//*                                      OLAYDP_HOST: Host downloads overlay code into DMEM upon request from DSP
++//*                                      OLAYDP_EMIF: Host downloads overlay code into ext. mem at boot-time. DSP uses
++//*                                                 DMA channel 0 to load code into on-chip PMEM
++//*                                      OLAYDP:    turns overlays generally on or off
++//*           07/15/00    B.Srinivasan   Cleaned up default tokens and tokens for au0501tp, au0501tp_debug,
++//*                                      ap0501tp and ap0501tp_debug targets as well
++//*           07/19/00    B.Srinivasan   Made changes w.r.t cleaning/fixing Rufus Interrupt related code
++//*                                      (changed token TC_INTRPT_RUFUS to INTRPT_RUFUS
++//*           06/14/00    Derf           added au0501cp
++//*           08/12/00    Yinong Ding    Added DPLL_MODE token.
++//*           08/16/00    F. Mujica      Moved DOUBLE_XMT_RATE, RX_HPF, and LEAKY_LMS tokens here.
++//*           09/05/00    M. Seidl       Changed ap0501tp back to do overlay through PCI (OLAY_PCI = 1)
++//*           09/11/00    M. Seidl       moved USB and OLAYDP_HOST definitions to be CHIPSET specific, not target specific
++//*           09/21/00    U.Dasgupta/    Added a token for separate transmit and receive buffers.
++//*                       F.Mujica       (SEPARATE_TX_RX_BUFFERS).
++//*           10/02/00    U.Dasgupta/    Added DPLL and SEPARATE_TX_RX_BUFFER tokens for au0502 target.
++//*                       F.Mujica
++//*           10/02/00    M. Castellano  Added new tokens for new Host/EMIF DSP code overlay.
++//*                                      OLAYDP_2STEP: Host downloads overlay code into ext. mem upon DSP request.  DSP
++//*                                      DMA channel 0 to load code into on-chip PMEM.  It is a somewhat hybrid version
++//*                                      of OLAYDP_HOST and OLAYDP_EMIF.  The test target is ap0502tp.
++//*           10/25/00    Balaji         Added tokens for arv500tp target
++//*           10/31/00    U. Iyer        Added TEQ_AVG token and set it one for Ax5
++//*           11/02/00    Barnett        Added OAM_EOC=0 in defaults at bottom of file.
++//*           11/21/00    M. Seidl       turned OLAYDP and AOC off for ap0307tp to make binary compatible w. whql'ed driver
++//*           11/28/00    Paul Hunt      added FASTRETRAIN token for fast retrain specific code
++//*           11/28/00    Paul Hunt      added PILOTDATA token to control channel estimation and transmission
++//*                                      of data on the upstream pilot tone for ITU standard code loads
++//*           12/20/00    Jack Huang     added EIGHTBITSRAM toekn for the targets that use 8-bit SRAM for
++//*                                      interleaver/deinterleaver
++//*           01/11/01    U.Dasgupta     Added mp targets and cleaned up GHS/PILOTDATA variables
++//*           01/23/01    U.Dasgupta     Cleaned up code within GLITE tokens
++//*           01/23/00    Barnett        Added in full EOC support for AP3/Ax5.  Got rid of UTC.  No longer needed.
++//*           02/08/01    Barnett        Added DDC token.
++//*           03/09/01    Nirmal Warke   Added in TOKEN definition for line diagnostics (LINE_DIAG): IMP DEPENDENCIES -
++//*                                      TEQ_AVG must be off when LINE_DIAG is on (since they share a union buffer at the same time)
++//*           03/13/01    M. Seidl       Recovered ap0500tp target. Added GHS token as PMEM saving option
++//*           03/14/01    Barnett        Added ap0500mb target support.  Look-and-feel is similar to ap0500tp.
++//*                                      Added seperate-but-equal def's wrt. ISDN Annex B, Annex C, and PROP.
++//*           03/14/01    J. Bergsagel   Added EXTERNBERT token.
++//*           03/15/01    Barnett/Balaji Merged AR5(H) -> 03.00.00 datapump.
++//*           03/16/01    Nirmal Warke   Added in TOKEN definition for crosstalk performance mods (CROSSTALK): IMP DEPENDENCIES -
++//*                                      TEQ_AVG must be off and LEAKY_LMS must be on when CROSSTALK is on
++//*           03/21/01    Barnett        Added support for ar0500lp, ar0500mp, ar0500dp, arv500lp, arv500mp, and arv500dp.
++//*           03/26/01    M. Seidl       enabled 64pt IFFT for ap0500mb (Raptor+AD11, FDM)
++//*           03/28/01    J. Bergsagel   Removed EXTERNBERT token (now use host intf. var. instead)
++//*           04/03/01    J. Bergsagel   Removed condition of DSPDP_CHIPSET_GEN==5 for default defines
++//*                                      Removed LEAKY_LMS token (assumed always 1)
++//*                                      Removed OLAYDP_HOST token (assumed always 0)
++//*                                      Removed RX_HPF token (assumed always 1)
++//*                                      Removed TRIBRID token (not used any more)
++//*                                      Removed FDD token (assumed always 1)
++//*                                      Removed HW_DEC token (assumed always 1)
++//*                                      Removed HW_TEQ token (assumed always 1)
++//*                                      Removed HWRSDEC token (assumed always 1)
++//*                                      Removed ILEC_AD11_ALCATEL337 token (assumed always 0)
++//*                                      Removed ILEC_AD11_HDSLNOISEFIX token (assumed always 0)
++//*                                      Removed ILEC_AD11_MODULATEPILOT token (assumed always 0)
++//*                                      Removed ILEC_AD11_NEWINTERPOLATE token (assumed always 0)
++//*                                      Removed ILEC_AD11_USTXHPF token (assumed always 0)
++//*                                      Removed SWDI token (assumed always 1)
++//*                                      Removed TD_AGC token (assumed always 1)
++//*                                      Removed DSPDP_LEGACY_TARGET token (assumed always 0)
++//*                                      Removed AD11_20, AD11_20NL and AD11_20_NEWPREC token (always 1)
++//*                                      Removed AI token (assumed always 1)
++//*                                      Removed ATUC token (assumed always 0)
++//*                                      Removed EU token (assumed always 0)
++//*                                      Removed EVM2 token (assumed always 0)
++//*                                      Removed INTRPT_RUFUS token (assumed always 0)
++//*                                      Removed MODPILOT token (assumed always 0)
++//*                                      Removed SL and SL_EVM tokens (assumed always 0)
++//*                                      Removed STBIFX token (assumed always 0)
++//*                                      Removed STD token (assumed always 1)
++//*                                      Removed SWDI_LOOPBACK token (assumed always 0)
++//*                                      Removed TID token (assumed always 0)
++//*                                      Removed TII token (assumed always 1)
++//*                                      Removed TIPCI token (assumed always 1)
++//*                                      Removed UDI token (assumed always 1)
++//*                                      Removed DC_BIAS token (assumed always 1)
++//*           04/05/01    Barnett        Added DSPDP_ prefix to tokens that originate
++//*                                      in the public interface.
++//*           05/07/01    Jack Huang     Removed DOUBLE_XMT_RATE token.
++//*           05/16/01    Barnett        Added back in EXTERNBERT token in support
++//*                                      of saving PMEM.
++//*           06/05/01    Jack Huang     Fixed the rules for ar0500mp_debug target
++//*           04/23/01    M. Halleck     Merge Astro Wu's DDC enhancements
++//*           06/05/01    M. Capps       Changed DSP_DEBUG to ENHANCED_SERIAL_DEBUG
++//*           07/03/01    M. Capps       Replaced ESD token with !DDC, added DEV_DEBUG
++//*           06/26/01    J. Bergsagel   Removed all the old ap03... stuff
++//*                                      Removed OLAYDP_HOST token (again)
++//*                                      Removed CROSSTALK token (assumed always 1)
++//*                                      Removed TEQ_AVG token (assumed always 0)
++//*                                      Removed DE token (assumed always 1)
++//*                                      Removed PVAT token and au0501cp target
++//*                                      Removed FASTRETRAIN token (assumed always 0)
++//*           07/05/01    J. Bergsagel   Changed PCIMASTER token to TC_ATM_PCIMASTER
++//*           07/20/01    Umesh Iyer     Added ATMBERT token. ATMBERT is conditional on SWTC definition. if SWTC is 0
++//*                                      ATMBERT should be 0. Else it can be 0/1. Default 0.
++//*           07/23/01    J. Bergsagel   Changed name from defines_u.h to dpsys_defines.h
++//*           07/24/01    Barnett        Added support for build of $(TARGET)_diag mfgr'ing targets.
++//*           08/02/01    Michael Seidl  renamed KAPIL token to !AD1X
++//*           08/02/01    Michael Seidl  renamed GHS token to PMEMSAVE_GHS
++//*           08/03/01    S.Yim          Added MFGR_DIAG token for afe diagnostic
++//*                                      Added AFEDEV token for afe device driver
++//*                                      Added DSPBIOSII token for dsp bios
++//*           09/21/01    Sameer         Enable EXTERNBERT.  Disable ATMBERT.
++//*           10/01/01    U.Dasgupta     Turned off SMART_MARGIN for ap0500mb because of FECs/CRCs;
++//*           10/09/01    Barnett        Added support for ar0500db.
++//*           10/12/01    Barnett        Disable EXTERNBERT.
++//*           10/15/01    Barnett        Turn off SMART_MARGIN.
++//*           11/07/01    Barnett        Def'ed ISDN_DEBUG for all targets to avoid compiler warnings.
++//*                                      Assumed defaul value is zero.
++//*           11/13/01    Barnett        Reworked ar0500db_debug to build JTAG-bootable load.
++//*                                      The equivalent production target should only be flash-bootable.
++//*           01/11/02    Yim            Added TOKEN JTAG to build JTAG load ar0500db_diag.
++//*           01/23/02    U Iyer         Added DEBUG_LOG token. Default value 0
++//*           01/31/02    Barnett        Added support for ar0700mp target.
++//*           02/04/02    S.Yim          Added TOKEN JTAG to build JTAG load ar0500mp_diag
++//*           02/11/02    U Iyer         Added MARGIN_DELTA_RETRAIN token. Default value 1
++//*           05/15/02    Sameer V       Enabled EXTERNBERT token for AR5 and AU5 platforms. EXTERNBERT is
++//*                                      not supported on AR5H.
++//*           02/14/02    Barnett        Don't ref the SWTC feature token if mfgr'ing diag target.
++//*           02/19/02    Yim            Added support to build au0502db_diag target.
++//*           03/08/02    Nirmal Warke   Added feature token HYBRID_SWITCH
++//*           03/15/02    U G Jani       Turned ON Bitswap support for AU5I (au0502db) targets.
++//*           04/08/02    U G Jani       Enabled NLNOISEADJSNR token for AU5I targets.
++//*           06/24/02    Seungmok Oh    Added PERTONE_EQ token support for those targets:
++//*                                      (ar0500mp_debug, au0502mp_debug, ar0500mp, au0502mp)
++//*           06/26/02    Mallesh        Added DS_PWR_CUTBACK token. Default value 1.
++//*           06/27/02    Mallesh        Changed default value of DS_PWR_CUTBACK token to 0.
++//*           06/29/02    U.Dasgupta     Token cleanup: Removed ISDN_DEBUG token
++//*           04/29/02    Mannering      Remove EIGHTBITSRAM, Combined DOUBLEBUFFER with
++//*                                      BITSWAP, added FPGA token
++//*           05/03/02    Mannering      cleanup token changed by the new routine names
++//*           05/06/02    Mannering      Add tokens OUTBAND and INBAND for codec commands
++//*                                      If both OUTBAND and INBAND are 0 codec register are
++//*                                      memory mapped.
++//*           05/29/2002  S.Yim          Removed AD1X, AFEDEV
++//*           08/31/2002  Paul Hunt      Added PERTONE_EQ and HYBRID_SWITCH for ar0700mp
++//*           09/12/2002  Paul Hunt      Added support for ar0700db target.
++//*           08/07/2002  U.Dasgupta     Turned off MARGIN_DELTA_RETRAIN feature for ISDN platforms
++//*           11/14/2002  Paul Hunt      Merged AX5 MR6 PC modifications into AR7 codebase, specifically
++//*                                      turned off MARGIN_DELTA_RETRAIN feature for ar0700db target
++//*           08/26/2002  N. Warke       Added DUAL_TEQ token. Active only for Ax7 target
++//*           09/26/2002  Mannering      Add token CODEC_EMU for codec emulator board
++//*           10/15/2002  Iyer/Molla     Added DMT_BIS token for DELT support
++//*           10/21/2002  A. Redfern     Added PHY_EC_ENABLE and PHY_PATH_ENABLE tokens
++//*           10/23/2002  A. Redfern     Removed LINE_DIAG token
++//*           10/28/2002  J. Bergsagel   Cleaned up old targets and cleaned up the token list
++//*           10/30/2002  A. Redfern     Added PHY_TDW_ENABLE
++//*           11/01/2002  A. Redfern     Removed SMART_MARGIN token
++//*           11/01/2002  Mustafa        Turned on SPECTRAL_SHAPING features for Lucent AnyMedia O.69 Interop.
++//*           11/15/2002  Yim/Mannering  Added CODEC_EMU token for analog emulation board specifics
++//*           11/15/2002  Iyer/Molla     Added DEBUG_DELT and MEM_STR token to support DELT debug
++//*           12/27/2002  Sameer V       Added ATM_TC_HW token for Sangam.
++//*           01/06/2003  J. Bergsagel   Added default values for NLNOISEADJSNR, ARTT and DS_PWR_CUTBACK
++//*           01/07/2003  S.Yim          Modified ar0700db_diag target to turn on ISDN token
++//*           01/22/2003  J. Bergsagel   Added back in defines for the debug targets.
++//*           01/21/2003  MCB            Implemented Ax7 UNIT-MODULE modular software framework.
++//*           01/31/2003  J. Bergsagel   Made debug targets to be for the FPGA platform; non-debug for Sangam.
++//*                                      Turned off DUAL_TEQ, PHY_EC_ENABLE and PHY_PATH_ENABLE by default
++//*                                      for the Sangam (non-debug) targets.
++//*                                      Turned off OLAYDP token by default.
++//*                                      Turned off SWTC and turned on ATM_TC_HW by default for Sangam targets.
++//*           01/29/2003  Sameer V       Added ATMBERT_HW token for Sangam.
++//*           02/04/2003  D. Mannering   Added CO_PROFILE token
++//*           02/19/2003  Sameer V       Added back EXTERNBERT token for ar0700mp_dp and ar0700db_dp targets.
++//*                                      Disabled EXTERNBERT for debug target since it is not supported on the
++//*                                      FPGA platform.
++//*           02/21/2003  A. Redfern     Turned off OAM_EOC, AOC and BITSWAP (until memory issues are resolved).
++//*                                      Turned on DUAL_TEQ, PHY_PATH_ENABLE and PHY_EC_ENABLE.
++//*           02/21/2003  D. Mannering   Added DEBUG_DUMP.
++//*           03/06/2003  J. Bergsagel   Cleaned up tokens for each target and switched diag targets
++//*                                      over to the Sangam platform (instead of the FPGA platform).
++//*           03/07/2003  J. Bergsagel   Cleaned up TC and BERT tokens
++//*           03/11/2003  J. Bergsagel   Turned on AOC and BITSWAP for Sangam POTS and ISDN targets.
++//*           03/20/2003  Mallesh        Added SHALF token.
++//*           03/24/2003  F. Mujica      Enable hybrid selection
++//*           03/26/2003  A. Redfern     Removed PMEMSAVE_GHS (always = 1).
++//*           04/08/2003  F. Mujica      Renamed HYBRID_SWITCH token to PHY_HYB_ENABLE
++//*           04/08/2003  J. Bergsagel   Turned off PHY_HYB_ENABLE for _debug targets (FPGA board builds)
++//*           04/09/2003  J. Bergsagel   Turned on OLAYDP only for ar0700mp and ar0700db.
++//*                                      Turned on AOC, BITSWAP, and OAM_EOC for ar0700mp and ar0700db.
++//*           04/09/2003  J. Bergsagel   Corrected name "PHY_HYB_SELECT" to "PHY_HYB_ENABLE"
++//*           04/15/2003  A. Redfern     Turned on ECI_PULSECOM_INTEROP because phase optimization was enabled.
++//*           05/05/2003  D. Mannering   Review Comments - turn on AOC, EXTERNBERT, SHALF, for ar0700mp; amd
++//*                                      turn on AOC for ar0700db
++//*           05/11/2003  Prashant S     Added DMT_BIS token for AR7 Soft DI work
++//*           05/13/2003  J. Bergsagel   Turned on IMPROVED_STAT_SUPPORT_06_03_00 by default for necessary statistics
++//*           05/15/2003  J. Bergsagel   Turned off CO_PROFILE for diag targets.
++//*           05/27/2003  U.Dasgupta     Added NLNOISEADJSNR_EC token for ISDN - to take care of non-linear noise
++//*                                      (from ISDN splitter) compensation.
++//*           06/02/2003  Z. Yang        Added PHY_NDIAG_ENABLE token.
++//*           06/02/2003  Z. Yang        Added COMB_LINEDIAG_ENABLE token.
++//*           06/05/2003  P. Hunt        Turned on ATUC_CLEARDOWN_CHANGE token for all targets.
++//*           06/05/2003  Mallesh        Turned on CENTILLIUM_VENDORID_AND_TXRATE_CHNG to enable logging the vendor ID
++//*                                      for centillium and litespan
++//*           06/05/2003  U.Dasgupta     Turned on SHALF token for ISDN.
++//*           06/06/2003  U.Dasgupta     Turned on G.hs nonstandard field token for ar0700db target.
++//*           06/12/2003  J. Bergsagel   Changed *_debug targets to be for JTAG=1 instead of FPGA targets
++//*                                      IMPORTANT: For non-JTAG cases, "JTAG" should be undefined.
++//*                                      Therefore, "JTAG" should not have a default case at the bottom (JTAG 0)
++//*           06/18/2003  A. Redfern     Turned on spectral shaping token for all targets.
++//*           06/23/2003  J. Bergsagel   Turned off GHS_NON_STD_FIELD token for ar0700db until bugs are fixed.
++//*           06/23/2003  U G Jani       Undid the above change since the bug is fixed.
++//*           06/27/2003  Mallesh        Removed all the interop tokens which are no longer required.
++//*           08/20/2003  J. Bergsagel   Added default value for OVHD_PMDTEST_PARA and put default section
++//*                                      tokens in alphabetical order.
++//*           10/09/2003  Hanyu Liu      Defined token ADSL2_1BIT_TONE to support Rx one bit constellation.
++//*           10/12/2003  Hanyu Liu      Defined token ADSL2_BSWP for bitswap.
++//*           10/20/2003  Xiaohui Li     Added READSL2_ENABLE token.
++//*           12/01/2003  Seungmok Oh    Added TXDF2B_PROFILING token, which is active only for POTS target.
++//*           12/09/2003  Jack Huang     Turned on GHS_NON_STD_FIELD support for AR7 POTS targets
++//*           12/16/2003  Mustafa T.     Added the necessary definitions for diag target.  
++//*****************************************************************************************************
++//*
++//* The default flag settings are:
++//*
++//*   -dATUC=1 -dSTD=0 -dISDN=0 -dTIPCI=0 -dTID=0 -dTII=0 -dAI=0
++//*   -dEVM2=0 -dEU=0 -dSL=0 -dSL_EVM=1 -dGLITE=0
++//*
++//* and are set after all the per-suffix options have had a chance to
++//* set them.  Each flag is only set if it has not previously been set, so
++//* per-suffix settings  can override defaults, and command-line defines can
++//* override per-suffix settings.
++//*
++//*****************************************************************************
++
++
++//* ===========================================================================
++//*   Suffix codes
++//*     The command-line can include -dOBJSFX_xxx to get a flag set
++//*     instead of explicitly setting each flag on each CC/ASM command-line.
++//*     and the object suffix will control the settings of "feature" constants.
++//* ===========================================================================
++//
++//* ===========================================================================
++//   Flag settings for new suffixes (in alphabetical order of suffix)
++//     Each suffix has to specify only those flags which differ from the
++//     default settings.
++//* ===========================================================================
++//  NOTE: Try to keep feature flags in alphabetical order to ease maintenance.
++//* ===========================================================================
++//*
++
++#define CHIPSET_ID_UNKN '?'
++#define CHIPSET_ID_AH   'H'
++#define CHIPSET_ID_AP   'P'
++#define CHIPSET_ID_AR   'R'
++#define CHIPSET_ID_ARV  'R'
++#define CHIPSET_ID_AT   'T'
++#define CHIPSET_ID_AU   'U'
++
++#define CHIPSET_ID2_GENERIC '0'
++#define CHIPSET_ID2_ARV  'R'
++
++  #define DSPDP_IMAGE_ID_STANDARD(code) ( \
++      STANDARD_is_MULTIMODE(code) ? "M" : \
++      STANDARD_is_GDMT(code)      ? "D" : \
++      STANDARD_is_GLITE(code)     ? "L" : \
++      STANDARD_is_T1413(code)     ? "T" : "_")
++
++  #define DSPDP_IMAGE_ID_SERVICE(code)  ( \
++      SERVICE_is_POTS(code)        ? "P" : \
++      SERVICE_is_ISDN_ANNEXB(code) ? "B" : \
++      SERVICE_is_ISDN_ANNEXC(code) ? "C" : \
++      SERVICE_is_ISDN_PROP(code)   ? "I" : "")
++
++// Bit-codes for feature byte in new version.
++//
++// 0000 0000
++// |||| ||||
++// |||| |||+ -- POTS
++// |||| ||+---- ISDN_ANNEXB
++// |||| |+----- ISDN_ANNEXC
++// |||| +------ ISDN_PROP
++// |||+--------
++// ||+--------- GHS
++// |+---------- GLITE
++// +----------- T1413
++//
++//
++#define FEATURE_BIT_T1413       0x80
++#define FEATURE_BIT_GLITE       0x40
++#define FEATURE_BIT_GHS         0x20
++#define FEATURE_BIT_ISDN_PROP   0x08
++#define FEATURE_BIT_ISDN_ANNEXC 0x04
++#define FEATURE_BIT_ISDN_ANNEXB 0x02
++#define FEATURE_BIT_POTS        0x01
++
++#define STANDARD_BITS_MASK      (FEATURE_BIT_T1413 | FEATURE_BIT_GLITE | FEATURE_BIT_GHS)
++#define STANDARD_BITS_T1413      FEATURE_BIT_T1413
++#define STANDARD_BITS_GHS        FEATURE_BIT_GHS
++#define STANDARD_BITS_GLITE     (FEATURE_BIT_GLITE | FEATURE_BIT_GHS)
++#define STANDARD_BITS_GDMT      (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)
++#define STANDARD_BITS_MULTIMODE (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)
++
++#define SERVICE_BIT_ISDN_ANNEXB  FEATURE_BIT_ISDN_ANNEXB
++#define SERVICE_BIT_ISDN_ANNEXC  FEATURE_BIT_ISDN_ANNEXC
++#define SERVICE_BIT_ISDN_PROP    FEATURE_BIT_ISDN_PROP
++#define SERVICE_BIT_POTS         FEATURE_BIT_POTS
++
++//
++//  Debug new-style suffixes
++//
++//
++
++#if defined(OBJSFX_ar0700db_debugobj)
++#ifndef OBJSFX_ar0700dbobj
++#define OBJSFX_ar0700dbobj 1
++#endif
++// Here, in alphabetic order, are the feature tokens that
++// distinguish this suffix from its non-_debug partner:
++// (All other tokens from the non-_debug partner that are non-conflicting will also be picked up)
++
++#ifndef JTAG
++#define JTAG 1
++#endif
++
++#elif defined(OBJSFX_ar0700mp_debugobj)
++#ifndef OBJSFX_ar0700mpobj
++#define OBJSFX_ar0700mpobj 1
++#endif
++// Here, in alphabetic order, are the feature tokens that
++// distinguish this suffix from its non-_debug partner:
++// (All other tokens from the non-_debug partner that are non-conflicting will also be picked up)
++
++#ifndef ADSL2_BSWP
++#define ADSL2_BSWP 1 
++#endif
++#ifndef AOC 
++#define AOC 1 
++#endif
++#ifndef BITSWAP
++#define BITSWAP 1 
++#endif
++#ifndef DEBUG_ADSL2
++#define DEBUG_ADSL2  0
++#endif
++#ifndef DEBUG_LOG 
++#define DEBUG_LOG 0 
++#endif
++#ifndef GHS_NON_STD_FIELD
++#define GHS_NON_STD_FIELD 1
++#endif
++#ifndef JTAG
++#define JTAG 1
++#endif
++#endif  // end of the series of "#elif defined" for debug targets
++
++
++//
++//  Standard new-style suffixes for operational and mfgr'ing diag.
++//
++
++#if defined(OBJSFX_ar0700dbobj)
++#define CHIPSET_AR07    1
++#define PLATFORM_AR0700 1
++#define DSPDP_CHIPSET_ID      CHIPSET_ID_AR
++#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
++#define DSPDP_CHIPSET_GEN     7
++#define DSPDP_HARDWARE_REV1   '0'
++#define DSPDP_HARDWARE_REV2   '0'
++#define DSPDP_FEATURE_CODE   (STANDARD_BITS_GDMT|SERVICE_BIT_ISDN_ANNEXB)
++#ifndef AOC
++#define AOC 1
++#endif
++// ATM_TC_HW and SWTC are mutually exclusive
++#ifndef ATM_TC_HW
++#define ATM_TC_HW 1
++#endif
++#ifndef SWTC
++#define SWTC 0
++#endif
++#ifndef BITSWAP
++#define BITSWAP 1
++#endif
++#ifndef EXTERNBERT
++#define EXTERNBERT 0
++#endif
++#ifndef GHS_NON_STD_FIELD
++#define GHS_NON_STD_FIELD 1
++#endif
++#ifndef MARGIN_DELTA_RETRAIN
++#define MARGIN_DELTA_RETRAIN 0
++#endif
++#ifndef NLNOISEADJSNR_EC
++#define NLNOISEADJSNR_EC 1
++#endif
++#ifndef OLAYDP
++#define OLAYDP 1
++#endif
++#ifndef SHALF
++#define SHALF 1
++#endif
++
++
++#elif defined(OBJSFX_ar0700db_diagobj)
++#define CHIPSET_AR07    1
++#define PLATFORM_AR0700 1
++#define DSPDP_CHIPSET_ID      CHIPSET_ID_AR
++#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
++#define DSPDP_CHIPSET_GEN     7
++#define DSPDP_HARDWARE_REV1   '0'
++#define DSPDP_HARDWARE_REV2   '0'
++#define DSPDP_FEATURE_CODE   (STANDARD_BITS_GDMT|SERVICE_BIT_ISDN_ANNEXB)
++#ifndef AOC
++#define AOC 0
++#endif
++// ATM_TC_HW and SWTC are mutually exclusive (or both must be off)
++#ifndef ATM_TC_HW
++#define ATM_TC_HW 0
++#endif
++#ifndef SWTC
++#define SWTC 0
++#endif
++#ifndef BITSWAP
++#define BITSWAP 0
++#endif
++#ifndef CO_PROFILE
++#define CO_PROFILE 0
++#endif
++#ifndef MARGIN_DELTA_RETRAIN
++#define MARGIN_DELTA_RETRAIN 0
++#endif
++#ifndef MFGR_DIAG
++#define MFGR_DIAG 1
++#endif
++#ifndef OAM_EOC
++#define OAM_EOC 0
++#endif
++#ifndef OLAYDP
++#define OLAYDP 0
++#endif
++#ifndef SNR_UPDATE
++#define SNR_UPDATE 0
++#endif
++
++#elif defined(OBJSFX_ar0700mpobj)
++#define CHIPSET_AR07    1
++#define PLATFORM_AR0700 1
++#define DSPDP_CHIPSET_ID      CHIPSET_ID_AR
++#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
++#define DSPDP_CHIPSET_GEN     7
++#define DSPDP_HARDWARE_REV1   '0'
++#define DSPDP_HARDWARE_REV2   '0'
++#define DSPDP_FEATURE_CODE   (STANDARD_BITS_MULTIMODE|SERVICE_BIT_POTS)
++#ifndef AOC
++#define AOC 1
++#endif
++// ATM_TC_HW and SWTC are mutually exclusive
++#ifndef ADSL2_1BIT_TONE
++#define ADSL2_1BIT_TONE 0
++#endif
++#ifndef ADSL2_BSWP
++#define ADSL2_BSWP 1 
++#endif
++#ifndef ATM_TC_HW
++#define ATM_TC_HW 1
++#endif
++#ifndef SWTC
++#define SWTC 0
++#endif
++#ifndef BITSWAP
++#define BITSWAP 1
++#endif
++#ifndef EXTERNBERT
++#define EXTERNBERT 0
++#endif
++#ifndef OLAYDP
++#define OLAYDP 1
++#endif
++#ifndef DMT_BIS
++#define DMT_BIS 1 
++#endif
++#ifndef SHALF
++#define SHALF 1 
++#endif
++#ifndef MEM_STR
++#define MEM_STR 0
++#endif
++#ifndef DS_LOOP_BACK
++#define DS_LOOP_BACK 0
++#endif
++#ifndef LOOP_BACK_DEBUG
++#define LOOP_BACK_DEBUG 0
++#endif
++#ifndef US_LOOP_BACK
++#define US_LOOP_BACK 0
++#endif
++#ifndef OVHD_PMDTEST_PARA
++#define OVHD_PMDTEST_PARA 0
++#endif
++#ifndef DS_RX_CODEWORD
++#define DS_RX_CODEWORD 1 
++#endif
++#ifndef READSL2_ENABLE
++#define READSL2_ENABLE 1
++#endif
++#ifndef GHS_NON_STD_FIELD
++#define GHS_NON_STD_FIELD 1
++#endif
++
++#elif defined(OBJSFX_ar0700mp_diagobj)
++#define CHIPSET_AR07    1
++#define PLATFORM_AR0700 1
++#define DSPDP_CHIPSET_ID      CHIPSET_ID_AR
++#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
++#define DSPDP_CHIPSET_GEN     7
++#define DSPDP_HARDWARE_REV1   '0'
++#define DSPDP_HARDWARE_REV2   '0'
++#define DSPDP_FEATURE_CODE   (STANDARD_BITS_MULTIMODE|SERVICE_BIT_POTS)
++#ifndef ADSL2_BSWP
++#define ADSL2_BSWP 0
++#endif
++#ifndef AOC
++#define AOC 0
++#endif
++// ATM_TC_HW and SWTC are mutually exclusive (or both must be off)
++#ifndef ATM_TC_HW
++#define ATM_TC_HW 0
++#endif
++#ifndef SWTC
++#define SWTC 0
++#endif
++#ifndef BITSWAP
++#define BITSWAP 0
++#endif
++#ifndef CO_PROFILE
++#define CO_PROFILE 0
++#endif
++#ifndef DMT_BIS
++#define DMT_BIS 0
++#endif
++#ifndef MARGIN_DELTA_RETRAIN
++#define MARGIN_DELTA_RETRAIN 0
++#endif
++#ifndef MFGR_DIAG
++#define MFGR_DIAG 1
++#endif
++#ifndef OAM_EOC
++#define OAM_EOC 0
++#endif
++#ifndef OLAYDP
++#define OLAYDP 0
++#endif
++#ifndef SNR_UPDATE
++#define SNR_UPDATE 0
++#endif
++#ifndef US_CRC_RETRAIN
++#define US_CRC_RETRAIN 0
++#endif
++#ifndef ADSL2_BSWP
++#define ADSL2_BSWP 0
++#endif
++#ifndef DMT_BIS
++#define DMT_BIS  0
++#endif
++#ifndef DS_RX_CODEWORD
++#define DS_RX_CODEWORD 0
++#endif
++
++#else
++#define DSPDP_CHIPSET_ID      CHIPSET_ID_UNKN
++#define DSPDP_CHIPSET_ID2     CHIPSET_ID2_GENERIC
++#define DSPDP_CHIPSET_GEN     0
++#define DSPDP_HARDWARE_REV1   '0'
++#define DSPDP_HARDWARE_REV2   '0'
++#define DSPDP_FEATURE_CODE    0
++#endif
++
++// For use in checking the code in drivers -- indented to avoid .h->.ah
++ #define STANDARD_is_T1413(code)      (!(((code) & STANDARD_BITS_MASK) ^  STANDARD_BITS_T1413))
++ #define STANDARD_is_GLITE(code)      (!(((code) & STANDARD_BITS_MASK) ^  STANDARD_BITS_GLITE))
++ #define STANDARD_is_GHS(code)          (((code) & STANDARD_BITS_MASK) &  STANDARD_BITS_GHS)
++ #define STANDARD_is_GDMT(code)       (!(((code) & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)))
++ #define STANDARD_is_MULTIMODE(code)  (!(((code) & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)))
++ #define SERVICE_is_POTS(code)           ((code) & SERVICE_BIT_POTS)
++ #define SERVICE_is_ISDN_ANNEXB(code)    ((code) & SERVICE_BIT_ISDN_ANNEXB)
++ #define SERVICE_is_ISDN_ANNEXC(code)    ((code) & SERVICE_BIT_ISDN_ANNEXC)
++ #define SERVICE_is_ISDN_PROP(code)      ((code) & SERVICE_BIT_ISDN_PROP)
++
++#define STANDARD_T1413     (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^  STANDARD_BITS_T1413))
++#define STANDARD_GLITE     (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^  STANDARD_BITS_GLITE))
++#define STANDARD_GHS         ((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) &  STANDARD_BITS_GHS)
++#define STANDARD_GDMT      (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)))
++#define STANDARD_MULTIMODE (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)))
++
++#define SERVICE_POTS        (DSPDP_FEATURE_CODE & SERVICE_BIT_POTS)
++#define SERVICE_ISDN_ANNEXB (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_ANNEXB)
++#define SERVICE_ISDN_ANNEXC (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_ANNEXC)
++#define SERVICE_ISDN_PROP   (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_PROP)
++#define SERVICE_ISDN        (SERVICE_ISDN_ANNEXB | SERVICE_ISDN_ANNEXC | SERVICE_ISDN_PROP)
++
++
++//
++//  Backwards compatibility with old tokens
++//
++
++#if (SERVICE_POTS)
++#ifndef ISDN
++#define ISDN 0
++#endif
++#endif
++
++#if (SERVICE_ISDN_ANNEXB | SERVICE_ISDN_PROP)
++#ifndef ISDN
++#define ISDN 1
++#endif
++#endif
++
++
++//
++//* ===========================================================================
++//  More Default settings
++//* ===========================================================================
++//
++
++//
++//  BEGIN Could automatically generate showdefs code
++//
++#ifndef AOC
++#define AOC 1
++#endif
++#ifndef ARTT
++#define ARTT 0
++#endif
++#ifndef ATMBERT
++#define ATMBERT 0
++#endif
++// ATM_TC_HW and SWTC are mutually exclusive
++#ifndef ATM_TC_HW
++#define ATM_TC_HW 1
++#endif
++#if ATM_TC_HW
++#ifndef ATMBERT_HW
++#define ATMBERT_HW 1
++#endif
++#ifndef SWTC
++#define SWTC 0
++#endif
++#else // else case for #if ATM_TC_HW
++#ifndef ATMBERT_HW
++#define ATMBERT_HW 0
++#endif
++#ifndef SWTC
++#define SWTC 1
++#endif
++#endif // end of #if ATM_TC_HW
++#ifndef ATM_TC_PATH1_ON
++#define ATM_TC_PATH1_ON 0
++#endif
++#ifndef BITSWAP
++#define BITSWAP 1
++#endif
++#ifndef COMB_LINEDIAG_ENABLE
++#define COMB_LINEDIAG_ENABLE  0
++#endif
++#ifndef CODEC_EMU
++#define CODEC_EMU 0
++#endif
++#ifndef CO_PROFILE
++#define CO_PROFILE 1
++#endif
++#ifndef DDC
++#define DDC 0
++#endif
++#ifndef DEBUG_ADSL2
++#define DEBUG_ADSL2 0 
++#endif
++#ifndef DEBUG_DUMP
++#define DEBUG_DUMP 0
++#endif
++#ifndef DEBUG_LOG
++#define DEBUG_LOG 0
++#endif
++#ifndef DEV_DEBUG
++#define DEV_DEBUG 0
++#endif
++#ifndef DS_LOOP_BACK
++#define DS_LOOP_BACK 0
++#endif
++#ifndef DS_RX_CODEWORD
++#define DS_RX_CODEWORD 1
++#endif
++#ifndef LOOP_BACK_DEBUG
++#define LOOP_BACK_DEBUG 0
++#endif
++#ifndef US_LOOP_BACK
++#define US_LOOP_BACK 0
++#endif
++#ifndef DPLL_MODE
++#define DPLL_MODE 0
++#endif
++#ifndef DSPBIOSII
++#define DSPBIOSII 0
++#endif
++#ifndef DMT_BIS
++#define DMT_BIS 1
++#endif
++#ifndef ADSL2_1BIT_TONE
++#define ADSL2_1BIT_TONE 0
++#endif
++#ifndef ADSL2_BSWP
++#define ADSL2_BSWP 1
++#endif
++#ifndef MEM_STR
++#define MEM_STR 0
++#endif
++#ifndef DS_PWR_CUTBACK
++#define DS_PWR_CUTBACK 0
++#endif
++#ifndef DUAL_TEQ
++#define DUAL_TEQ 1
++#endif
++#ifndef EXTERNBERT
++#define EXTERNBERT 0
++#endif
++#ifndef FPGA
++#define FPGA 0
++#endif
++#ifndef INBAND
++#define INBAND 0
++#endif
++#ifndef ISDN
++#define ISDN 0
++#endif
++#ifndef ISDN_DEBUG
++#define ISDN_DEBUG 0
++#endif
++#ifndef LINE_DIAG
++#define LINE_DIAG 1
++#endif
++#ifndef LOOP_BACK_DEBUG
++#define LOOP_BACK_DEBUG 0
++#endif
++#ifndef MANUFACTURING_TESTS
++#define MANUFACTURING_TESTS 0
++#endif
++#ifndef MARGIN_DELTA_RETRAIN
++#define MARGIN_DELTA_RETRAIN 1
++#endif
++#ifndef MEM_STR
++#define MEM_STR 0
++#endif
++#ifndef MFGR_DIAG
++#define MFGR_DIAG 0
++#endif
++#ifndef NLNOISEADJSNR
++#define NLNOISEADJSNR 0
++#endif
++#ifndef NLNOISEADJSNR_EC
++#define NLNOISEADJSNR_EC 0
++#endif
++#ifndef NTR_MODE
++#define NTR_MODE 0
++#endif
++#ifndef OAM_EOC
++#define OAM_EOC 1
++#endif
++#ifndef OLAYDP
++#define OLAYDP 0
++#endif
++#ifndef OLAYDP_EMIF
++#define OLAYDP_EMIF 0
++#endif
++#ifndef OLAYDP_2STEP
++#define OLAYDP_2STEP 0
++#endif
++#ifndef OLAYDP_PCI
++#define OLAYDP_PCI 0
++#endif
++#ifndef OUTBAND
++#define OUTBAND 0
++#endif
++#ifndef OVHD_PMDTEST_PARA
++#define OVHD_PMDTEST_PARA 0
++#endif
++#ifndef PERTONE_EQ
++#define PERTONE_EQ 0
++#endif
++#ifndef PHY_EC_ENABLE
++#define PHY_EC_ENABLE 1
++#endif
++#ifndef PHY_HYB_ENABLE
++#define PHY_HYB_ENABLE 1
++#endif
++#ifndef PHY_NDIAG_ENABLE
++#define PHY_NDIAG_ENABLE 0
++#endif
++#ifndef PHY_PATH_ENABLE
++#define PHY_PATH_ENABLE 1
++#endif
++#ifndef PHY_TDW_ENABLE
++#define PHY_TDW_ENABLE 0
++#endif
++#ifndef TC_ATM_PCIMASTER
++#define TC_ATM_PCIMASTER 0
++#endif
++#ifndef SEPARATE_TX_RX_BUFFERS
++#define SEPARATE_TX_RX_BUFFERS 0
++#endif
++#ifndef SHALF
++#define SHALF 0
++#endif
++#ifndef SPECTRAL_SHAPING
++#define SPECTRAL_SHAPING 1
++#endif
++#ifndef SNR_UPDATE
++#define SNR_UPDATE 1
++#endif
++#ifndef TC_DEBUG
++#define TC_DEBUG 0
++#endif
++#ifndef TC_LOOPBACK
++#define TC_LOOPBACK 0
++#endif
++#ifndef TESTMODE
++#define TESTMODE 0
++#endif
++#ifndef TRELLIS
++#define TRELLIS 1
++#endif
++#ifndef TXDF2B_PROFILING
++#if (SERVICE_POTS & (!MFGR_DIAG) & (CO_PROFILE))
++#define TXDF2B_PROFILING 1
++#else
++#define TXDF2B_PROFILING 0
++#endif
++#endif
++#ifndef US_CRC_RETRAIN
++#define US_CRC_RETRAIN 1
++#endif
++#ifndef US_LOOP_BACK
++#define US_LOOP_BACK 0
++#endif
++#ifndef USB
++#define USB 0
++#endif
++#ifndef READSL2_ENABLE
++#define READSL2_ENABLE 1
++#endif
++
++// Interop tokens
++#ifndef GHS_NON_STD_FIELD
++#define GHS_NON_STD_FIELD 0
++#endif
++#ifndef LUCENT_ANYMEDIA_ENIATT_INTEROP
++#define LUCENT_ANYMEDIA_ENIATT_INTEROP 0
++#endif
++
++
++//
++//  END Could automatically generate showdefs code
++//
++#if DSPDP_FEATURE_CODE
++#else
++// Unrecognized_suffix____check_spelling
++#endif
++//
++//  LNK_CMD is set when running CPP to generate lnk_cpe.cmd file
++//  -- the linker is not happy when it sees C code show up in the
++//  result!
++//
++#ifndef LNK_CMD
++extern int compile_happy;  // Keep the compiler from complaining about an empty file
++#endif
++
++#endif
++
+diff -urN linux.old/drivers/atm/sangam_atm/env_def_typedefs.h linux.dev/drivers/atm/sangam_atm/env_def_typedefs.h
+--- linux.old/drivers/atm/sangam_atm/env_def_typedefs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/env_def_typedefs.h	2005-08-23 04:46:50.104842632 +0200
+@@ -0,0 +1,228 @@
++#ifndef __ENV_DEF_TYPEDEFS_H__
++#define __ENV_DEF_TYPEDEFS_H__ 1
++
++/*******************************************************************************
++*  FILE PURPOSE: Define data types for C and TMS320C6x C compilers
++********************************************************************************
++*
++*  FILE NAME: dpsys_typedefs.h
++*
++*  DESCRIPTION:
++*        This file contains the main typedefs that we need.
++*
++*  HISTORY:
++*
++*  03/11/97  Bob Lee      Created
++*  03/13/97  Chishtie
++*  03/14/97  Bob Lee      Format change to meet "Engineering Model
++*                         - System Architucture Specification"
++*                         Rev AP3.  Jan. 29, 1997
++*  07/21/00  Barnett      Moved many common typedefs from
++*                         host i/f header file to here.
++*  03/30/01  Barnett      Mod's per driver team feedback.
++*                         Some tokens cannot be def'ed
++*                         if _WINDEF_ is def'ed.
++*  04/05/01  Barnett      Added DSPDP_ prefix to tokens that originate
++*                         in the public interface.
++*  06/01/01  J. Bergsagel Modified to add standard typedefs
++*  07/25/01  J. Bergsagel Changed name from typedefs.h to dpsys_typedefs.h
++*  07/30/01  J. Bergsagel Moved typedefs that were conflicting with Windows
++*                         driver software to the "#ifndef _WINDEF_" section.
++*  08/09/01  S. Yim       Moved FALSE/TRUE definitions from ctl_interface_u.h
++*                         (conflict with BIOS/std.h)
++*  09/03/01  S. Yim       Do not include typedef char and float if _STD defined
++*                         (conflict with BIOS/std.h)
++*  01/21/03  MCB          Implemented Ax7 UNIT-MODULE modular software framework.
++*  03/20/03  Mallesh      Defined size of basic variables
++*  03/27/03  F. Mujica    Added SINT40 and UINT40 definitions.
++*
++*  (C) Copyright Texas Instruments Inc. 1997-2001.  All rights reserved.
++*******************************************************************************/
++
++// Common type definitions
++
++// Basic constants needed everywhere
++#ifndef STD_
++#define FALSE 0
++#define TRUE 1
++#endif
++
++// Read-Write Data Types
++typedef signed char           SINT8;      // Signed 8-bit integer (7-bit magnitude)
++typedef unsigned char         UINT8;      // Unsigned 8-bit integer
++typedef signed short          SINT16;     // Signed 16-bit integer (15-bit magnitude)
++typedef unsigned short        UINT16;     // Unsigned 16-bit integer
++typedef signed int            SINT32;     // Signed 32-bit integer (31-bit magnitude)
++typedef unsigned int          UINT32;     // Unsigned 32-bit integer
++typedef long signed int       SINT40;     // Long signed 40-bit integer
++typedef long unsigned int     UINT40;     // Long unsigned 40-bit integer
++
++// All pointers are 32 bits long
++typedef SINT8                 *PSINT8;    // Pointer to SINT8
++typedef UINT8                 *PUINT8;    // Pointer to UINT8
++typedef SINT16                *PSINT16;   // Pointer to SINT16
++typedef UINT16                *PUINT16;   // Pointer to UINT16
++typedef SINT32                *PSINT32;   // Pointer to SINT32
++typedef UINT32                *PUINT32;   // Pointer to UINT32
++
++#define SIZEOF_SINT8          1
++#define SIZEOF_UINT8          1
++#define SIZEOF_SINT16         2
++#define SIZEOF_UINT16         2
++#define SIZEOF_SINT32         4
++#define SIZEOF_UINT32         4
++#define SIZEOF_SINT40         8
++#define SIZEOF_UINT40         8
++
++// Size of Read-Write Data Types - in bytes
++#define SIZEOF_char   1
++#define SIZEOF_Int8   1
++#define SIZEOF_UChar  1
++#define SIZEOF_UInt8  1
++#define SIZEOF_Float  4
++#define SIZEOF_Double 8
++#define SIZEOF_byte   1
++
++// Read-Only Data Types - should be only used for ROM code
++typedef const char            CharRom;    // 8 bit signed character
++typedef const signed char     Int8Rom;    // 8 bit signed integer
++typedef const unsigned char   UCharRom;    // 8 bit unsigned character
++typedef const unsigned char   UInt8Rom;   // 8 bit unsigned integer
++typedef const float           FloatRom;   // IEEE 32-bit
++typedef const double          DoubleRom;  // IEEE 64-bit
++
++#ifndef _WINDEF_ 
++
++// Read-Write Data Types
++typedef signed char           Int8;       // 8 bit signed integer
++typedef unsigned char         UChar;      // 8 bit unsigned character
++typedef unsigned char         UInt8;      // 8 bit unsigned integer
++#ifndef STD_
++typedef char                  Char;       // 8 bit signed character
++typedef float                 Float;      // IEEE 32-bit
++#endif
++typedef double                Double;     // IEEE 64-bit
++typedef signed char           byte;       // 8 bit signed integer
++
++
++// These typedefs collide with those in Win2k DDK inc\WINDEF.H
++
++// common type definition
++typedef unsigned char   BYTE;    // 8-bit
++typedef signed short    SHORT;   // 16-bit signed
++typedef unsigned short  WORD;    // 16-bit
++typedef unsigned int    DWORD;   // 32-bit, TI DSP has 40 bit longs
++
++// All pointers are 32 bits long
++typedef BYTE           *PBYTE;  // pointer to 8 bit data
++typedef unsigned char  *PCHAR;  // pointer to 8 bit data
++typedef SHORT          *PSHORT; // pointer to 16 bit data
++typedef WORD           *PWORD;  // pointer to 16 bit data
++typedef DWORD          *PDWORD; // pointer to 32 bit data
++
++#endif // #ifndef _WINDEF_
++
++
++#define SIZEOF_BYTE   1
++#define SIZEOF_SHORT  2
++#define SIZEOF_WORD   2
++#define SIZEOF_DWORD  4
++#define SIZEOF_PCHAR  4
++#define SIZEOF_PWORD  4
++#define SIZEOF_PDWORD 4
++
++// Size of Read-Only Data Types - in bytes
++#define SIZEOF_CharRom   1
++#define SIZEOF_Int8Rom   1
++#define SIZEOF_UCharRom  1
++#define SIZEOF_UInt8Rom  1
++#define SIZEOF_FloatRom  4
++#define SIZEOF_DoubleRom 8
++
++#define SIZEOF_complex_byte     (2*SIZEOF_byte)
++#define SIZEOF_PTR_complex_byte 4
++typedef struct {
++  byte    re;
++  byte    im;
++} complex_byte, *PTR_complex_byte;
++
++#define SIZEOF_complex_short   4
++#define SIZEOF_PTR_complex_short 4
++typedef struct {
++  short   re;
++  short   im;
++} complex_short, *PTR_complex_short;
++
++#define SIZEOF_complex_int     8
++#define SIZEOF_PTR_complex_int 4
++typedef struct {
++  int     re;
++  int     im;
++} complex_int, *PTR_complex_int;
++
++typedef struct {
++  int high;
++  unsigned int low;
++} int64;
++
++typedef struct {
++  int64 real;
++  int64 imag;
++} complex_int64;
++
++#define SIZEOF_PVOID 4
++typedef void *PVOID;            // pointer to void
++
++//* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
++
++#if defined(_TMS320C6X)           // TMS320C6xx type definitions 
++
++// Read-Write Data Types 
++typedef short                   Int16;      // 16 bit signed integer 
++typedef unsigned short          UInt16;     // 16 bit unsigned integer 
++typedef int                     Int32;      // 32 bit signed integer 
++typedef unsigned int            UInt32;     // 32 bit unsigned signed integer 
++typedef long                    Long40;     // 40 bit signed integer 
++typedef unsigned long           ULong40;    // 40 bit unsigned signed integer 
++
++// Size of Read-Write Data Types - in bytes
++#define SIZEOF_Int16   2
++#define SIZEOF_UInt16  2
++#define SIZEOF_Int32   4
++#define SIZEOF_UInt32  4
++#define SIZEOF_Long40  5
++#define SIZEOF_ULong40 5
++
++// Read-Only Data Types - should be only used for ROM code
++typedef const short             Int16Rom;   // 16 bit signed integer 
++typedef const unsigned short    UInt16Rom;  // 16 bit unsigned integer 
++typedef const int               Int32Rom;   // 32 bit signed integer 
++typedef const unsigned int      UInt32Rom;  // 32 bit unsigned signed integer 
++typedef const long              Long40Rom;  // 40 bit signed integer 
++typedef const unsigned long     ULong40Rom; // 40 bit unsigned signed integer 
++
++// Size of Read-Only Data Types - in bytes
++#define SIZEOF_Int16Rom   2
++#define SIZEOF_UInt16Rom  2
++#define SIZEOF_Int32Rom   4
++#define SIZEOF_UInt32Rom  4
++#define SIZEOF_Long40Rom  5
++#define SIZEOF_ULong40Rom 5
++
++#else                             // 32 bits PC Host type definitions 
++
++// Read-Write Data Types 
++typedef short                   Int16;      // 16 bit signed integer 
++typedef unsigned short          UInt16;     // 16 bit unsigned integer 
++typedef int                     Int32;      // 32 bit signed integer 
++typedef unsigned int            UInt32;     // 32 bit unsigned integer 
++
++// Read-Only Data Types - should be only used for ROM code 
++typedef const short             Int16Rom;   // 16 bit signed integer 
++typedef const unsigned short    UInt16Rom;  // 16 bit unsigned integer 
++typedef const int               Int32Rom;   // 32 bit signed integer 
++typedef const unsigned int      UInt32Rom;  // 32 bit unsigned integer 
++
++#endif
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/Makefile linux.dev/drivers/atm/sangam_atm/Makefile
+--- linux.old/drivers/atm/sangam_atm/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/Makefile	2005-08-23 04:46:50.104842632 +0200
+@@ -0,0 +1,35 @@
++# File: drivers/net/avalanche_cpmac/Makefile
++#
++# Makefile for the Linux network (CPMAC) device drivers.
++#
++
++
++O_TARGET := tiatm.o
++obj-$(CONFIG_MIPS_SANGAM_ATM) += tiatm.o
++list-multi      := tiatm.o
++
++tiatm-objs	:= tn7atm.o tn7dsl.o tn7sar.o dsl_hal_api.o dsl_hal_support.o cpsar.o aal5sar.o
++
++EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT
++
++ifeq ($(ANNEX),B)
++EXTRA_CFLAGS += -DANNEX_B -DB
++else
++ifeq ($(ANNEX),C)
++EXTRA_CFLAGS += -DANNEX_C -DC
++else
++EXTRA_CFLAGS += -DANNEX_A -DP
++endif
++endif
++
++
++include $(TOPDIR)/Rules.make
++
++tiatm.o:      $(tiatm-objs)
++	$(LD) -r -o $@ $(tiatm-objs)
++
++#avalanche_cpmac.o:      $(avalanche_cpmac-objs)
++#	$(LD) -r -o $@ $(avalanche_cpmac-objs)
++
++clean:
++	rm -f core *.o *.a *.s
+diff -urN linux.old/drivers/atm/sangam_atm/queue.h linux.dev/drivers/atm/sangam_atm/queue.h
+--- linux.old/drivers/atm/sangam_atm/queue.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/queue.h	2005-08-23 04:46:50.104842632 +0200
+@@ -0,0 +1,167 @@
++
++#if !defined( __QUEUE_H__ )
++#define __QUEUE_H__
++
++typedef spinlock_t OS_SPIN_LOCK;
++#define osFreeSpinLock(pLock) while(0)
++void osAcquireSpinLock(OS_SPIN_LOCK *pLock);
++void osReleaseSpinLock(OS_SPIN_LOCK *pLock);
++void osAllocateSpinLock(OS_SPIN_LOCK *pLock);
++
++//#define osAcquireSpinLock(pLock) spin_lock(pLock)
++//#define osReleaseSpinLock(pLock) spin_unlock(pLock)
++//#define osAllocateSpinLock(pLock) spin_lock_init(pLock)
++
++
++typedef struct _TI_LIST_ENTRY {
++  struct _TI_LIST_ENTRY *Flink;
++  struct _TI_LIST_ENTRY *Blink;
++} TI_LIST_ENTRY, *PTI_LIST_ENTRY, TQE, *PTQE;
++
++typedef struct _TIATM_LIST_ENTRY 
++{
++  TI_LIST_ENTRY  Link;
++} TIATM_LIST_ENTRY, *PTIATM_LIST_ENTRY;
++
++//-------------------------------------------------------------------------
++// QueueInitList -- Macro which will initialize a queue to NULL.
++//-------------------------------------------------------------------------
++#define QueueInitList(_L) (_L)->Link.Flink = (_L)->Link.Blink = (PTI_LIST_ENTRY)0;
++
++//-------------------------------------------------------------------------
++// QueueEmpty -- Macro which checks to see if a queue is empty.
++//-------------------------------------------------------------------------
++#define QueueEmpty(_L) (QueueGetHead((_L)) == (PTIATM_LIST_ENTRY)0)
++
++//-------------------------------------------------------------------------
++// QueueGetHead -- Macro which returns the head of the queue, but does not
++// remove the head from the queue.
++//-------------------------------------------------------------------------
++#define QueueGetHead(_L) ((PTIATM_LIST_ENTRY)((_L)->Link.Flink))
++
++#define QueueGetNext(Elem) ((PTIATM_LIST_ENTRY)((Elem)->Link.Flink))
++
++//-------------------------------------------------------------------------
++// QueuePushHead -- Macro which puts an element at the head of the queue.
++//-------------------------------------------------------------------------
++#define QueuePushHead(_L,_E) \
++  if (!((_E)->Link.Flink = (_L)->Link.Flink)) \
++  { \
++    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
++  } \
++(_L)->Link.Flink = (PTI_LIST_ENTRY)(_E);
++
++//-------------------------------------------------------------------------
++// QueueRemoveHead -- Macro which removes the head of the head of queue.
++//-------------------------------------------------------------------------
++#define QueueRemoveHead(_L) \
++{                                                     \
++  PTIATM_LIST_ENTRY ListElem;                        \
++  if (ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink) \
++  {   \
++    if(!((_L)->Link.Flink = ListElem->Link.Flink)) \
++      (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
++  } \
++}
++
++//-------------------------------------------------------------------------
++// QueuePutTail -- Macro which puts an element at the tail (end) of the queue.
++//-------------------------------------------------------------------------
++#define QueuePutTail(_L,_E) \
++{ \
++  if ((_L)->Link.Blink) \
++  { \
++    ((PTIATM_LIST_ENTRY)(_L)->Link.Blink)->Link.Flink = (PTI_LIST_ENTRY)(_E); \
++    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
++  } \
++  else \
++  { \
++    (_L)->Link.Flink = \
++    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
++  } \
++  (_E)->Link.Flink = (PTI_LIST_ENTRY)0; \
++}
++
++//-------------------------------------------------------------------------
++// QueuePutTailWithLock -- Macro which puts an element at the tail (end) of 
++// the queue, using spin lock.
++//-------------------------------------------------------------------------
++#define QueuePutTailWithLock(_L,_E, pLock) \
++{ \
++  osAcquireSpinLock(pLock); \
++  if ((_L)->Link.Blink) \
++  { \
++    ((PTIATM_LIST_ENTRY)(_L)->Link.Blink)->Link.Flink = (PTI_LIST_ENTRY)(_E); \
++    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
++  } \
++  else \
++  { \
++    (_L)->Link.Flink = \
++    (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
++  } \
++  (_E)->Link.Flink = (PTI_LIST_ENTRY)0; \
++  osReleaseSpinLock(pLock); \
++}
++
++//-------------------------------------------------------------------------
++// QueueGetTail -- Macro which returns the tail of the queue, but does not
++// remove the tail from the queue.
++//-------------------------------------------------------------------------
++#define QueueGetTail(_L) ((PTIATM_LIST_ENTRY)((_L)->Link.Blink))
++
++//-------------------------------------------------------------------------
++// QueuePopHead -- Macro which  will pop the head off of a queue (list), and
++//                 return it (this differs only from queueremovehead only in 
++//                 the 1st line)
++//-------------------------------------------------------------------------
++#define QueuePopHead(_L) \
++(PTIATM_LIST_ENTRY) (_L)->Link.Flink; QueueRemoveHead(_L);
++
++#define QueueRemoveTail(_L)  \
++{                                                     \
++  PTIATM_LIST_ENTRY ListElem;                        \
++  ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink; \
++  if(ListElem == (PTIATM_LIST_ENTRY)(_L)->Link.Blink) \
++  {   \
++    (_L)->Link.Flink = (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
++  } \
++  else \
++  {    \
++    while(ListElem->Link.Flink != (PTI_LIST_ENTRY)(_L)->Link.Blink) \
++    { \
++      ListElem = (PTIATM_LIST_ENTRY)ListElem->Link.Flink; \
++    } \
++    (_L)->Link.Blink = (PTI_LIST_ENTRY) ListElem; \
++    ListElem->Link.Flink = (PTI_LIST_ENTRY)0; \
++  } \
++}
++
++#define QueueRemoveItem(_L, Elem)  \
++{                                                     \
++  PTIATM_LIST_ENTRY ListElem;                        \
++  ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink; \
++  if(ListElem == Elem) \
++  { \
++    QueueRemoveHead(_L); \
++  } \
++  else \
++  { \
++    while(ListElem) \
++    { \
++      if(Elem == (PTIATM_LIST_ENTRY)ListElem->Link.Flink) \
++      { \
++        ListElem->Link.Flink = ((PTIATM_LIST_ENTRY)Elem)->Link.Flink; \
++        if(Elem == (PTIATM_LIST_ENTRY)(_L)->Link.Blink) \
++          (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
++        break; \
++      } \
++      ListElem = (PTIATM_LIST_ENTRY)ListElem->Link.Flink; \
++    }\
++  } \
++  ((PTIATM_LIST_ENTRY)Elem)->Link.Flink = (PTI_LIST_ENTRY) 0; \
++}
++
++#define QueuePopTail(_L)  \
++((PTIATM_LIST_ENTRY)((_L)->Link.Blink)); QueueRemoveTail(_L); 
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/release.txt linux.dev/drivers/atm/sangam_atm/release.txt
+--- linux.old/drivers/atm/sangam_atm/release.txt	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/release.txt	2005-08-23 04:46:50.104842632 +0200
+@@ -0,0 +1,118 @@
++This is release notes for AR7 Linux ATM driver.
++
++version 04.02.04.00
++-------------------
++
++1. Corrected the conditional logic from logical AND to logical OR in the case
++   of check for DSL line down condition.  This is to fix PPPoA crashing
++   problem when DSL line is unplugged.
++
++version 04.02.03.00
++-------------------
++1. Changed overlay page to static allocation.
++2. Added flag to stop TX during channel closing.
++3. Changed DMA memory allocation back to "GFP_ATOMIC" flag.
++
++version 04.02.02.00
++-------------------
++1. Changed DMA memory allocation from "GFP_ATOMIC" to  "GFP_KERNEL" flag.
++2. Added "DoMask" setting for VBR channel setup.
++
++version 04.02.01.01
++-------------------
++1. Modified priority check scheme per SPTC request.
++
++Version 04.02.01.00
++-------------------
++1. Add check to skb->priority to place packets to either normal or priority queue.
++2. Add spin lock to increment and decrement of queued buffer number.
++
++Version 04.02.00.00
++-------------------
++Features:
++1. Add MBS and CDVT QoS support for ATM driver.
++2. Add "stop/start queue" for ToS application.
++3. Add Showtime margin retrain based on EOC message.
++4. Add EOC vendor ID customalization logic for Annex B.
++5. Supports D3 datapump.
++
++Version 04.01.00.00
++-------------------
++Re-release of 04.00.07.00 for D1.1 datapump.
++
++Version 04.00.07.00
++-------------------
++Features:
++1. Add marging retrain capability by setting following Adam2 Env.
++   setenv enable_margin_retrain 1
++   setenv margin_threshold xx, xx is in half db, i.e., 10 means 5db.
++
++Bugfixs:
++1. New PDSP firmware that fix the F5 OAM cell loopback probelm in Cisco DSLAM.
++
++Version 04.00.06.00
++-------------------
++1. ATM interrupt pacing is defauted to 2 interrupts/s.
++2. Rx Service MAX changed ftom 16 to 8.
++
++Version 04.00.05.00
++-------------------
++Features:
++1. Add Adam2 env to disable the TurboDSL by entering "setenv TurboDSL 0".
++2. Add ability to set interrupt pacing for ATM driver.
++
++Bugfixs:
++1. Fixed the RFC2684 and CLIP problems for Cisco router.
++2. Fixed LED blinking problem when DSL cable is unplugged.
++3. Fixed problem that "selected mode" is not updated.
++
++Version 04.00.04.00
++-------------------
++Features:
++1. Added feature so OAM F5 ping will not require a corresponding PVC channel to
++   be setup.
++2. Added timeout value for F5 OAM ping. The new command are "exxxpyyycdzzzt" for
++   end-to-end and "sxxxpyyycdzzzt" for segment. "zzz" is timeout value in milli-second.
++3. Added proc entry "avsar_pvc_table" to record received VPIs and VCIs. The format is 
++	vpi,vci
++   seperated by new line. To search for PVCs, an application can do the following.
++	i) Send a (or several) F5 OAM cell on a VPI/VPI pairs with command 
++	   echo exxxpyyycd2t > /proc/sys/dev/dslmod
++	ii) Wait >2ms or poll proc entry /proc/avalanche/avsar_oam_ping until the result
++	   indicates a failure. (It will be failed all the time with 2ms timeout.)
++	iii) Repeat above two steps for new VPI/VCI pairs.
++      iv) Check proc entry /proc/avalanche/avsar_pvc_table any time for PVCs that responded.
++  
++Version 04.00.03.00
++-------------------
++Bug Fixs:
++1. Fixed bug that caused crash when phone cable is unplugged.
++2. Fixed LED operation for "flexible LEDs".
++
++Features:
++1. Added the proc entry "avsar_oam_ping" to signal oam ping result.
++   0 - failed; 1 - success; 2 - in progress.
++2. Added oam ping timeout env variable. The timeout can be specified by
++   adding Adam2 env "oam_lb_timeout". The value is in millisecond.
++
++Version 04.00.02.00
++-------------------
++1. The driver uses hardware queue for Turbo DSL.
++2. Added new modem statistics listed below:
++	US and DS TX powers, atuc Vendor ID and revision, training mode selected, 
++	Hybrid Selected, and etc.
++
++Version 04.00.01.00
++-------------------
++
++1. This driver release contains all the features that exists in AR5 Linux ATM 
++   3.1 driver.
++
++2. F4 OAM generation is added.
++
++3. Software queuing is used for TURBO DSL.
++
++4. Porting guide "is created. Please look into that document for detailed 
++   information.
++
++   
+diff -urN linux.old/drivers/atm/sangam_atm/syssw_version.h linux.dev/drivers/atm/sangam_atm/syssw_version.h
+--- linux.old/drivers/atm/sangam_atm/syssw_version.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/syssw_version.h	2005-08-23 04:46:50.105842480 +0200
+@@ -0,0 +1,94 @@
++#ifndef __SYSSW_VERSION_H__
++#define __SYSSW_VERSION_H__ 1
++
++/*******************************************************************************
++* FILE PURPOSE:     DSL Driver API functions for Sangam
++*
++********************************************************************************
++* FILE NAME:        dsl_hal_basicapi.c
++*
++* DESCRIPTION:  
++*       Contains basic DSL HAL APIs for Sangam
++*  
++* (C) Copyright 2003-04, Texas Instruments, Inc.
++*    History
++*    Date        Version            Notes
++*    14May03     0.00.00            RamP   Original Version Created
++*    14May03     0.00.01            RamP   Initial Rev numbers inserted 
++*    14May03     0.00.02            RamP   Bumped version numbers for Dsl Hal
++*                                          & dhalapp for alpha plus
++*    19May03     0.00.03            MCB    Bumped dslhal version number
++*                                          because of dependant changes
++*                                          wrt. linux-nsp atm drivers.
++*    22May03     0.00.04            RamP   Bumped dslhal & dhalapp buildnum
++*                                          for inner/outer pair & DGASP code
++*    06Jun03     0.00.05            RamP   Bumped up buildnum for LED, STM, 
++*                                          interrupt processing, statistics
++*                                          and other pre-beta features
++*    09Jun03     0.00.06            JEB    Fixed error in DHALAPP bugfix/buildnum
++*    09Jun03     0.00.07            RamP   Bumped up buildnum for incremental
++*                                          changes to apis, statistics, memory
++*                                          fixes, parameter configurations
++*    11Jun03     0.00.08            RamP   Bumped up buildnum for Co profile
++*                                          free memory fix
++*    12Jun03     0.00.09            JEB    Bumped version numbers for AR7 1.00 Beta
++*    02Jul03     0.00.10            ZT     Bumped HAL version for overlay page
++*    18Jul03     0.00.11            RamP   Bumped HAL version for analog diags
++*    22Jul03     0.00.12            JEB    Bumped DHALAPP buildnum for analog diags
++*    31Jul03     0.00.13            RamP   Bumped HAL version for engr. drop
++*    04Aug03     0.00.14            JEB    Bumped HAL version buildnum for CHECKPOINT65 changes
++*                                          Bumped LINUX version buildnum for CHECKPOINT65 changes
++*    06Aug03     0.00.15            MCB    Bumped all version numbers in prep for AR7 1.0 R2 release for POTS.
++*    13Aug03     0.00.16            MCB    Set rev id's for D3/R1.1 (ADSL2).
++*    21Aug03     0.00.17            JEB    Bumped up build numbers for merge of code additions from D1
++*    26Sep03     0.00.18            JEB    Set rev id's for another D3/R1 (ADSL2).
++*    14Oct03     0.00.19            JEB    Bumped Linux minor number and reset bugfix number for release.
++*                                          Bumped build numbers on DSLHAL and DHALAPP for this checkpoint.
++*    14Oct03     0.00.20            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT15.
++*    21Oct03     0.00.21            JEB    Bumped build number on DSLHAL for CHECKPOINT16.
++*    22Oct03     0.00.22            MCB    Bumped all version numbers in support of D3R1 release.
++*    27Oct03     0.00.23            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT19.
++*                                          Updated version for DSLAGENT to be 02.01.00.01 for ACT 2.1 R0.
++*    30Oct03     0.00.24            JEB    Bumped bugfix number on LINUXATM Version for next release.
++*                                          Bumped build numbers on DSLHAL and DHALAPP
++*    31Oct03     0.00.25            MCB    Bumped all version numbers in support of D3R2 release.
++*    14Nov03     0.00.26            JEB    Bumped build numbers on DSLHAL and DHALAPP
++*                                          Changed version for DSLAGENT to be 02.00.01.01 for an ACT 2.0 R0
++*    20Nov03     0.00.27            JEB    Bumped build number on DSLHAL.
++*                                          Changed version for DSLAGENT to be 02.00.02.00 for the next ACT 2.0 R2
++*    21Nov03     0.00.28            MCB    Bumped all version numbers in support of D3R2 release.
++*    21Nov03     0.00.29            JEB    Bumped build numbers on DSLHAL and DHALAPP for D3-R0 drop on 11/21.
++*    16Dec03     0.00.30            JEB    Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT31.
++*    21Dec03     0.00.31            MCB    Bumped all version numbers in support of D3R2 release.
++*    05Jan04     0.00.32            JEB    Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 34.
++*    15Jan04     0.00.33            JEB    Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 36.
++*    26Jan04     0.00.34            JEB    Changed Linux ATM version number to be 04.02.03.00.
++*    27Jan04     0.00.35            MCB    Bumped all version numbers in support of D3R2 release.
++*******************************************************************************/
++
++/* Dsl Hal API Version Numbers */
++#define DSLHAL_VERSION_MAJOR       03
++#define DSLHAL_VERSION_MINOR       00
++#define DSLHAL_VERSION_BUGFIX      06
++#define DSLHAL_VERSION_BUILDNUM    00
++#define DSLHAL_VERSION_TIMESTAMP   00
++
++/* dhalapp Adam2 Application Version Numbers */
++#define DHALAPP_VERSION_MAJOR      03
++#define DHALAPP_VERSION_MINOR      00
++#define DHALAPP_VERSION_BUGFIX     05
++#define DHALAPP_VERSION_BUILDNUM   00
++
++/* Linux ATM Driver Version Numbers */
++#define LINUXATM_VERSION_MAJOR     04
++#define LINUXATM_VERSION_MINOR     02
++#define LINUXATM_VERSION_BUGFIX    04
++#define LINUXATM_VERSION_BUILDNUM  00
++
++/* DSL Agent Version Numbers */
++#define DSLAGENT_VERSION_MAJOR     02
++#define DSLAGENT_VERSION_MINOR     00
++#define DSLAGENT_VERSION_BUGFIX    02
++#define DSLAGENT_VERSION_BUILDNUM  00
++
++#endif /* pairs with #ifndef __SYSSW_VERSION_H__ */
+diff -urN linux.old/drivers/atm/sangam_atm/tn7api.h linux.dev/drivers/atm/sangam_atm/tn7api.h
+--- linux.old/drivers/atm/sangam_atm/tn7api.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/tn7api.h	2005-08-23 04:46:50.105842480 +0200
+@@ -0,0 +1,54 @@
++/* 
++ *    Tnetd73xx ATM driver.
++ *    by Zhicheng Tang, ztang@ti.com
++ *    2000 (c) Texas Instruments Inc.
++ *
++ *
++*/
++
++#ifndef __SAPI_H
++#define __SAPI_H
++
++/* tn7atm.c */
++void xdump(unsigned char *buff, int len, int debugLev);
++int tn7atm_receive(void *os_dev, int ch, unsigned int packet_size, void *os_receive_info, void *data);
++void *tn7atm_allocate_rx_skb(void *os_dev, void **os_receive_info, unsigned int size);
++void tn7atm_free_rx_skb(void *skb);
++void tn7atm_sarhal_isr_register(void *os_dev, void *hal_isr, int interrupt_num);
++int tn7atm_send_complete(void *osSendInfo);
++int tn7atm_device_connect_status(void *priv, int state);
++int tn7atm_lut_find(short vpi, int vci);
++
++/* tn7dsl.h */
++void tn7dsl_exit(void);
++int tn7dsl_init(void *priv);
++int tn7dsl_proc_stats(char* buf, char **start, off_t offset, int count,int *eof, void *data);
++int tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count,int *eof, void *data);
++int tn7dsl_handle_interrupt(void);
++void dprintf( int uDbgLevel, char * szFmt, ...);
++void tn7dsl_dslmod_sysctl_register(void);
++void tn7dsl_dslmod_sysctl_unregister(void);
++int tn7dsl_get_dslhal_version(char *pVer);
++int tn7dsl_get_dsp_version(char *pVer);
++
++int os_atoi(const char *pStr);
++int os_atoh(const char *pStr);
++unsigned long os_atoul(const char *pStr);
++
++/* tn7sar.c */
++int tn7sar_activate_vc(Tn7AtmPrivate *priv, short vpi, int vci, int pcr, int scr, int mbs, int cdvt, int chan, int qos);
++int tn7sar_init(struct atm_dev *dev, Tn7AtmPrivate *priv);
++int tn7sar_register_interrupt_handle(void *os_dev, void *hal_isr, int *interrupt_num);
++void tn7sar_exit(struct atm_dev *dev, Tn7AtmPrivate *priv);
++int tn7sar_deactivate_vc(Tn7AtmPrivate *priv, int chan);
++int tn7sar_handle_interrupt(struct atm_dev *dev, Tn7AtmPrivate *priv);
++int tn7sar_send_packet(Tn7AtmPrivate *priv, int chan, void *new_skb, void *data,unsigned int len, int priority);
++void tn7sar_get_sar_version(Tn7AtmPrivate *priv, char **pVer);
++int tn7sar_get_near_end_loopback_count(unsigned int *pF4count, unsigned int *pF5count);
++int tn7sar_oam_generation(void *privContext, int chan, int type, int vpi, int vci, int timeout);
++int tn7sar_get_stats(void *priv1);
++int tn7sar_proc_sar_stat(char* buf, char **start, off_t offset, int count,int *eof, void *data);
++void tn7sar_get_sar_firmware_version(unsigned int *pdsp_version_ms, unsigned int *pdsp_version_ls);
++int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data);
++int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data);
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/tn7atm.c linux.dev/drivers/atm/sangam_atm/tn7atm.c
+--- linux.old/drivers/atm/sangam_atm/tn7atm.c	2005-08-28 01:52:26.000000000 -0600
++++ linux.dev/drivers/atm/sangam_atm/tn7atm.c	2005-08-28 02:08:07.000000000 -0600
+@@ -0,0 +1,1233 @@
++/* 
++ *   tn7.c
++ *   Linux atm module implementation.
++ *   Zhicheng Tang 01/08/2003
++ *   2003 (c) Texas Instruments Inc.
++ *
++ *
++*/
++
++#include <linux/config.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/atmdev.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/smp_lock.h>
++#include <asm/io.h>
++#include <asm/mips-boards/prom.h>
++#include <linux/proc_fs.h>
++#include <linux/string.h>
++#include <linux/ctype.h>
++#include "tn7atm.h"
++#include "tn7api.h"
++#include "syssw_version.h"
++
++#ifdef CONFIG_LED_MODULE
++#include <asm/ar7/ledapp.h>
++#endif
++#include <asm/ar7/avalanche_intc.h>
++
++#ifdef MODULE
++MODULE_DESCRIPTION ("Tnetd73xx ATM Device Driver");
++MODULE_AUTHOR ("Zhicheng Tang");
++#endif
++
++/* Version Information */
++//static char atm_version[] ="1.0.0.1";
++
++#define TRUE   1
++#define FALSE  0
++
++#define STOP_EMPTY_BUFF 2
++#define START_EMPTY_BUFF 3
++/* externs */
++
++/*end of externs */
++
++#define tn7atm_kfree_skb(x)     dev_kfree_skb(x)
++
++/* prototypes */
++int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci);
++
++void tn7atm_close (struct atm_vcc *vcc);
++
++static int tn7atm_ioctl (struct atm_dev *dev, unsigned int cmd, void *arg);
++
++int tn7atm_send (struct atm_vcc *vcc, struct sk_buff *skb);
++
++static int tn7atm_change_qos (struct atm_vcc *vcc, struct atm_qos *qos,int flags);
++
++static int tn7atm_detect(void);
++static int tn7atm_init(struct atm_dev* dev);
++//static int tn7atm_reset(void);
++static int tn7atm_irq_request(struct atm_dev* dev);
++static int tn7atm_proc_version(char* buf, char **start, off_t offset, int count,int *eof, void *data);
++static void tn7atm_exit(void);
++static int tn7atm_proc_channels(char* buf, char **start, off_t offset, int count,int *eof, void *data);
++static int tn7atm_proc_private(char* buf, char **start, off_t offset, int count,int *eof,void *data);
++//static void tn7atm_free_packet(void *vcc1, void *priv, void *skb1);
++static int tn7atm_queue_packet_to_sar(void *vcc1, void *skb1);
++
++#include "turbodsl.c"
++
++/* ATM device operations */
++
++struct atm_dev *mydev;
++
++static const struct atmdev_ops tn7atm_ops = {
++        open:           tn7atm_open,
++        close:          tn7atm_close,
++        ioctl:          tn7atm_ioctl,
++        getsockopt:     NULL,
++        setsockopt:     NULL,
++        send:           tn7atm_send,
++        sg_send:          NULL,
++        phy_put:          NULL,
++        phy_get:          NULL,
++        change_qos:     tn7atm_change_qos,
++};
++
++
++int __guDbgLevel = 1;
++
++
++void xdump(unsigned char *buff, int len, int debugLev)
++{
++#ifdef DEBUG_BUILD
++  int i, j;
++  if( __guDbgLevel < debugLev)
++    return;
++
++  j=0;
++  for(i=0;i<len;i++)
++  {
++    printk("%02x ", buff[i]);
++    j++;
++    if(j==8)
++    {
++      j=0;
++      printk("\n");
++    }
++  }
++  printk("\n");
++#endif
++}
++
++
++#if 0 /* by nbd */
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_walk_vccs(struct atm_dev *dev, short *vcc, int *vci)
++ *
++ *  Description: retrieve VPI/VCI for connection
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++static int
++tn7atm_walk_vccs(struct atm_vcc *vcc, short *vpi, int *vci)
++{
++  struct atm_vcc* walk;
++
++  //    printk(tn7 "tn7atm_walk_vccs\n");
++  /* find a free VPI */
++  if (*vpi == ATM_VPI_ANY) {
++
++    for (*vpi = 0, walk = vcc->dev->vccs; walk; walk = walk->next) {
++
++      if ((walk->vci == *vci) && (walk->vpi == *vpi)) {
++        (*vpi)++;
++        walk = vcc->dev->vccs;
++      }
++    }
++  }
++
++  /* find a free VCI */
++  if (*vci == ATM_VCI_ANY) {
++        
++    for (*vci = ATM_NOT_RSV_VCI, walk = vcc->dev->vccs; walk; walk = walk->next) {
++
++      if ((walk->vpi = *vpi) && (walk->vci == *vci)) {
++        *vci = walk->vci + 1;
++        walk = vcc->dev->vccs;
++      }
++    }
++  }
++
++  return 0;
++}
++#endif
++
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_sar_irq(void)
++ *
++ *  Description: tnetd73xx SAR interrupt.
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++static void
++tn7atm_sar_irq(int irq , void *voiddev , struct pt_regs *regs)
++{
++  struct atm_dev *atmdev;
++  Tn7AtmPrivate *priv;
++
++  dprintf(6, "tn7atm_sar_irq\n");
++  atmdev = (struct atm_dev *) voiddev;
++  priv = (Tn7AtmPrivate *)atmdev->dev_data;
++
++  tn7sar_handle_interrupt(atmdev, priv);
++ 
++  dprintf(6, "Leaving tn7atm_sar_irq\n");
++}
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_dsl_irq(void)
++ *
++ *  Description: tnetd73xx DSL interrupt.
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++static void
++tn7atm_dsl_irq(int irq , void *voiddev , struct pt_regs *regs)
++{
++  struct atm_dev *atmdev;
++  Tn7AtmPrivate *priv;
++
++  dprintf(4, "tn7atm_dsl_irq\n");
++  atmdev = (struct atm_dev *) voiddev;
++  priv = (Tn7AtmPrivate *)atmdev->dev_data;
++
++  tn7dsl_handle_interrupt();
++ 
++  dprintf(4, "Leaving tn7atm_dsl_irq\n");
++}
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_Inittxcomp(struct tn7* tn7)
++ *
++ *  Description: Initialize Interrupt handler
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
++static int __init
++tn7atm_irq_request (struct atm_dev *dev)
++{
++  Tn7AtmPrivate *priv;
++  char *ptr;
++  int ipace=2;
++
++  dprintf(4, "tn7atm_irq_request()\n");
++  priv = (Tn7AtmPrivate *) dev->dev_data;
++
++  /* Register SAR interrupt */
++  priv->sar_irq = LNXINTNUM(ATM_SAR_INT);       /* Interrupt line # */
++  if (request_irq(priv->sar_irq, tn7atm_sar_irq, SA_INTERRUPT, "SAR ", dev))
++    printk ("Could not register tn7atm_sar_irq\n");
++
++  /* interrupt pacing */
++  ptr= prom_getenv("sar_ipacemax");
++  if(ptr)
++  {
++    ipace=os_atoi(ptr);
++  }
++  avalanche_request_pacing(priv->sar_irq, ATM_SAR_INT_PACING_BLOCK_NUM, ipace);
++
++  /* Reigster Receive interrupt A */
++  priv->dsl_irq = LNXINTNUM(ATM_DSL_INT);       /* Interrupt line # */
++  if (request_irq(priv->dsl_irq, tn7atm_dsl_irq, SA_INTERRUPT, "DSL ", dev))
++    printk ("Could not register tn7atm_dsl_irq\n");
++
++  return 0;
++}
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_lut_find(struct atm_vcc *vcc)
++ *
++ *  Description: find an TX DMA channel
++ *               that matches a vpi/vci pair
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
++int
++tn7atm_lut_find(short vpi, int vci)
++{
++  int      i;
++  Tn7AtmPrivate *priv;
++  
++  priv = (Tn7AtmPrivate *)mydev->dev_data;
++
++  if(vci==0) // find first vpi channel
++  {
++    for(i=0; i< MAX_DMA_CHAN; i++)
++    {  
++      if((priv->lut[i].vpi == vpi))
++      return i;
++    }
++  }
++
++  dprintf(4, "vpi=%d, vci=%d\n", vpi, vci);
++  for(i=0; i< MAX_DMA_CHAN; i++)
++  {  
++    if((priv->lut[i].vpi == vpi) && (priv->lut[i].vci == vci))
++      return i;
++  }
++
++  
++
++  return ATM_NO_DMA_CHAN;
++}
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_lut_clear(struct atm_vcc *vcc,int chan)
++ *
++ *  Description: find an TX DMA channel
++ *               that matches a vpi/vci pair
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
++static int
++tn7atm_lut_clear(struct atm_vcc *vcc, int chan)
++{
++  Tn7AtmPrivate *priv;
++  
++  priv = (Tn7AtmPrivate *)vcc->dev->dev_data;
++
++  memset(&priv->lut[chan], 0, sizeof(priv->lut[chan]));
++
++  return 0;
++}
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_walk_lut(void)
++ *
++ *  Description: find an available TX DMA channel
++ *               and initialize LUT
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
++static int 
++tn7atm_walk_lut(Tn7AtmPrivate *priv)
++{
++  int i;
++
++  for(i=0; i< MAX_DMA_CHAN; i++){ 
++    if(!priv->lut[i].inuse)
++    {    
++      return i;                            /* return available dma channel number */
++    }
++  }
++  return ATM_NO_DMA_CHAN;       /* no tx dma channels available */
++}
++
++static int 
++tn7atm_set_lut(Tn7AtmPrivate *priv, struct atm_vcc *vcc, int chan)
++{
++  
++  if(!priv->lut[chan].inuse)
++  {
++    priv->lut[chan].vpi = (int)vcc->vpi;
++    priv->lut[chan].vci = vcc->vci;
++    priv->lut[chan].chanid = chan;
++    priv->lut[chan].inuse = 1;         /* claim the channel */
++    priv->lut[chan].vcc = (void *)vcc;
++    priv->lut[chan].bClosing = 0;
++    priv->lut[chan].ready = 0;
++    priv->lut[chan].tx_total_bufs = TX_BUFFER_NUM;
++    priv->lut[chan].tx_used_bufs[0] = 0;
++    priv->lut[chan].tx_used_bufs[1] = 0;
++    return 0;
++  }
++  return -1;       /* no tx dma channels available */
++}
++
++#if 0
++static void tn7atm_free_packet(void *pVc, void *pDev, void *pPacket)
++  {
++  Tn7AtmPrivate *priv;
++  struct atm_vcc *vcc;
++  struct sk_buff *skb;
++
++  vcc = (struct atm_vcc *)pVc;
++  priv = (Tn7AtmPrivate *)pDev;
++  skb = (struct sk_buff *) pPacket;
++
++  if(vcc->pop)
++    vcc->pop(vcc, skb);   
++  else
++    tn7atm_kfree_skb(skb);
++  }
++#endif
++
++static void str2eaddr(char *pMac, char *pStr)
++{
++  char tmp[3];
++  int i;
++
++  for(i=0;i<6;i++)
++  {
++    tmp[0]=pStr[i*3];
++    tmp[1]=pStr[i*3+1];
++    tmp[2]=0;
++    pMac[i]=os_atoh(tmp);
++  }
++}
++
++static int __init
++tn7atm_get_ESI(struct atm_dev *dev)
++{
++  int  i;
++  char  esi_addr[ESI_LEN]={0x00,0x00,0x11,0x22,0x33,0x44};
++  char  *esiaddr_str = NULL;
++
++  esiaddr_str = prom_getenv("macc");
++
++  if (!esiaddr_str) {
++    //printk("macc address not set in adam2 environment space\n");
++    //printk("Using default macc address = 00:01:02:03:04:05\n");
++    esiaddr_str = "00:00:02:03:04:05";
++  }
++  str2eaddr(esi_addr, esiaddr_str);
++
++  for(i=0; i < ESI_LEN; i++)
++    dev->esi[i] = esi_addr[i];
++
++  return 0;
++}
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_open(struct atm_vcc *vcc, short vpi, int vci)
++ *
++ *  Description: Device operation: open
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
++//static int
++int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci)
++{
++  Tn7AtmPrivate *priv;
++  int dmachan;
++  int rc;
++  int traffic_type;
++  int pcr = 0x20000;
++  int scr = 0x20000;
++  int mbs = 0x20000;
++  int cdvt = 10000;
++  int err;
++
++  dprintf(1, "tn7atm_open()\n");
++
++  priv = (Tn7AtmPrivate *)vcc->dev->dev_data; 
++  if(priv==NULL)
++  {
++    printk("null priv\n");
++    return -1;
++  }
++
++  MOD_INC_USE_COUNT;
++
++#if 0 /* by nbd */
++  /* find a free VPI/VCI */
++  tn7atm_walk_vccs(vcc, &vpi, &vci);
++#else
++  if ((err = atm_find_ci(vcc, &vpi, &vci))) {
++    printk("atm_find_ci err = %d\n", err);
++    return err;
++  }
++  
++#endif
++        
++  vcc->vpi = vpi;
++  vcc->vci = vci;
++
++  if (vci == ATM_VCI_UNSPEC || vpi == ATM_VCI_UNSPEC)
++  {
++    MOD_DEC_USE_COUNT;
++    return -EBUSY;
++  }
++  
++  /* check to see whether PVC is opened or not */
++  if((dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci)) != ATM_NO_DMA_CHAN) 
++  {
++    MOD_DEC_USE_COUNT;  
++    printk("PVC already opened. dmachan = %d\n", dmachan);
++    return -EBUSY;
++  }
++  /*check for available channel */
++  if((dmachan = tn7atm_walk_lut(priv)) == ATM_NO_DMA_CHAN)
++  {
++    printk("No TX DMA channels available\n");
++    return -EBUSY;
++  }
++
++  set_bit(ATM_VF_ADDR, &vcc->flags);  /* claim address    */
++        
++  vcc->itf = vcc->dev->number;        /* interface number */
++
++  switch(vcc->qos.txtp.traffic_class)
++  {
++    case ATM_CBR: /* Constant Bit Rate */
++      traffic_type = 0;
++      pcr = vcc->qos.txtp.pcr;
++      scr = vcc->qos.txtp.pcr;
++      cdvt = vcc->qos.txtp.max_cdv;
++      printk("cdvt=%d\n", cdvt);
++      break;
++    case ATM_UBR: /* Unspecified Bit Rate */
++      traffic_type = 2;
++      break;
++
++	/* Disable ATM_VBR until pppd ppoatm plugin supports it.
++         * NOTE: Support ATM_VBR requires the addition of a scr
++         * field to the atm_trafprm structure which will cause
++	 * a change in the SO_ATMQOS ioctl. Make sure that the
++	 * revised header file becomes visible to the pppd
++	 * pppoatm plugin source, or the SO_ATMQOS ioctl will fail.
++	 */
++#if 0
++    case ATM_VBR: /* Variable Bit Rate */
++      traffic_type = 1;
++      pcr = vcc->qos.txtp.pcr;
++      scr = vcc->qos.txtp.scr;
++      if(vcc->qos.txtp.max_pcr >= 0)
++        mbs = vcc->qos.txtp.max_pcr;
++      cdvt = vcc->qos.txtp.max_cdv;
++      printk("cdvt=%d\n", cdvt);
++      printk("mbs=%d\n", mbs);
++      break;
++#endif
++    default:
++        traffic_type = 2;
++  }
++
++  dprintf(4, "vpi=%d, vci=%d, pcr=%d, dmachan=%d, qos=%d\n", vpi,vci,pcr,dmachan,traffic_type);
++  /* Activate SAR channel */
++  rc = tn7sar_activate_vc(priv, vpi, vci, pcr, scr, mbs, cdvt, dmachan, traffic_type);
++  if(rc < 0)
++  {
++    
++    MOD_DEC_USE_COUNT;
++    return -EBUSY;
++  }
++  
++  /* insure that the the vcc struct points to the correct entry
++       in the lookup table */
++
++  tn7atm_set_lut(priv,vcc, dmachan);
++  vcc->dev_data = (void *)&priv->lut[dmachan];
++  set_bit(ATM_VF_READY, &vcc->flags);
++
++  mdelay(100);
++  priv->lut[dmachan].ready = 1;
++  dprintf (1, "Leave tn7atm_open\n"); 
++  return 0;     
++}
++
++
++//static void
++void tn7atm_close (struct atm_vcc *vcc)
++{
++  Tn7AtmPrivate *priv;
++  int dmachan;
++
++  priv = (Tn7AtmPrivate *)vcc->dev->dev_data;
++  dprintf(4, "closing %d.%d.%d.%d\n", vcc->itf, vcc->vpi, vcc->vci, vcc->qos.aal);
++ 
++  clear_bit(ATM_VF_READY, &vcc->flags);  /* ATM_VF_READY: channel is ready to transfer data */
++
++  dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci);
++  printk("closing channel: %d\n", dmachan);
++  if(dmachan == ATM_NO_DMA_CHAN)
++  {
++    printk("Closing channel not found.\n");
++    return;
++  }
++  priv->lut[dmachan].bClosing = 1;
++  priv->lut[dmachan].ready = 0;
++  if(tn7sar_deactivate_vc(priv,dmachan))  /* tear down channel */
++  {
++    printk("failed to close channel %d.\n", dmachan);
++  }
++
++  clear_bit(ATM_VF_READY, &vcc->flags);  /* ATM_VF_READY: channel is ready to transfer data */
++  tn7atm_lut_clear(vcc, dmachan);
++
++  MOD_DEC_USE_COUNT;
++
++  dprintf (1, "Leave tn7atm_close\n");
++}
++
++#define ATM_TXSTOP 0x800c61f4 
++static int
++tn7atm_ioctl (struct atm_dev *dev, unsigned int cmd, void *arg)
++{
++  Tn7AtmPrivate *priv;
++  priv = (Tn7AtmPrivate *) dev->dev_data;
++  
++    //printk("tn7atm_ioctl\n");
++    //printk("arg = %x\n", *(int *)arg);
++    //printk("cmd =%x\n", cmd);
++    switch(cmd)
++    {
++
++      case ATM_TXSTOP: /*temp fix for SAR tear down problem */
++//        printk("ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg);
++//        printk("arg = %d\n", *(int*)arg);
++        priv->xmitStop = *(int *)arg;
++        //printk("Executing ATM_SETLOOP for tn7 \n");
++        //printk("Stop variable = :%d: \n",priv->xmitStop);
++        return 0;
++
++      //case SAR_DSL_RESET_SOFTBOOT:
++      //  return tn7atm_dsl_clean_reboot();
++    case 0:
++        return 0;
++    }
++    
++    return -ENOSYS;
++  
++}
++
++static int
++tn7atm_change_qos (struct atm_vcc *vcc, struct atm_qos *qos,int flags)
++{
++  dprintf (1, "Enter tn7atm_change_qos\n");
++  dprintf (1, "Leave tn7atm_change_qos\n");
++  return 0;
++}
++
++
++int tn7atm_send (struct atm_vcc *vcc, struct sk_buff *skb)
++{
++  
++  Tn7AtmPrivate *priv;
++  int bret;
++  int chan;
++  
++  dprintf(4, "tn7atm_send()\n");
++  
++  priv = (Tn7AtmPrivate*)vcc->dev->dev_data;
++
++  //if(skb->len < 64)
++    //xdump((unsigned char *)skb->data, skb->len, 1);
++  //else
++    //xdump((unsigned char *)skb->data, 64, 1);
++  /* check for dsl line connection */
++
++  /* add vcc field in skb for clip inATMARP fix */
++  ATM_SKB(skb)->vcc = vcc;
++	/* Ron change 2.3 -> 2.4 ??*/
++  //if(priv->lConnected != 1 || priv->xmitStop == 1)
++  if(priv->lConnected != 1 && priv->xmitStop == 1)
++  {
++    dprintf(4,"dsl line down\n");
++    if(vcc->pop)
++      vcc->pop(vcc, skb);   
++    else
++     tn7atm_kfree_skb(skb);
++    return 1;
++  }
++  
++  /* check whether PVC is closing */
++  chan = tn7atm_lut_find(vcc->vpi, vcc->vci);
++  /* set br2684 dev pointer */
++  priv->lut[chan].net_device = skb->dev;
++  if(chan == ATM_NO_DMA_CHAN || priv->lut[chan].bClosing == 1)
++  {
++    dprintf(4, "can find sar channel\n");
++    if(vcc->pop)
++      vcc->pop(vcc, skb);   
++    else
++     tn7atm_kfree_skb(skb);
++    return 1;
++  }
++
++  bret=tn7atm_queue_packet_to_sar(vcc, skb);
++
++  return bret;
++}
++
++
++static int tn7atm_queue_packet_to_sar(void *vcc1, void *skb1)
++{
++  struct atm_vcc *vcc;
++  struct sk_buff *skb;
++  int priority = 1;
++  Tn7AtmPrivate *priv;
++  int dmachan;
++
++  vcc = (struct atm_vcc *)vcc1;
++  skb = (struct sk_buff *)skb1;
++
++  priv = (Tn7AtmPrivate*)vcc->dev->dev_data;
++
++  dprintf(4, "vcc->vci=%d\n", vcc->vci);
++  dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci);
++  if(dmachan == ATM_NO_DMA_CHAN)
++  {
++    dprintf(4, "can find sar channel\n");
++    if(vcc->pop)
++      vcc->pop(vcc, skb);   
++    else
++     tn7atm_kfree_skb(skb);
++    return 1;
++  }
++
++  // turbo dsl TCP ack check
++  if(priv->bTurboDsl)
++    priority = turbodsl_check_priority_type(skb->data);
++
++  //skb priority check
++  if(priority != 0)
++  {
++    if((skb->cb[47])>>1)
++      priority=1;
++    else
++      priority = 0;
++  }
++  
++  /* add queue info here */
++  skb->cb[47] = (char)priority;
++  spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
++  priv->lut[dmachan].tx_used_bufs[priority]++;
++  spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
++
++  if(tn7sar_send_packet(priv,dmachan, skb, skb->data, skb->len, priority) != 0)
++  {
++    dprintf(1, "failed to send packet\n");
++    if(vcc->pop)
++      vcc->pop(vcc, skb);   
++    else
++     tn7atm_kfree_skb(skb);
++
++    spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
++    priv->lut[dmachan].tx_used_bufs[priority]--;
++    spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
++    return 1;
++  }
++  
++  /* check for whether tx queue is full or not */
++  //printk("bufs used = %d\n", priv->lut[dmachan].tx_used_bufs[1]);
++  spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
++  if(priv->lut[dmachan].tx_used_bufs[1] >= (priv->lut[dmachan].tx_total_bufs - STOP_EMPTY_BUFF) ||
++      priv->lut[dmachan].tx_used_bufs[0] >= (priv->lut[dmachan].tx_total_bufs - STOP_EMPTY_BUFF))
++  {
++    //printk("net queue stoped\n");
++    netif_stop_queue(priv->lut[dmachan].net_device);
++    priv->lut[dmachan].netqueue_stop = 1;
++  }
++  spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
++
++  return 0;
++}
++
++/* functions needed by SAR HAL */
++
++int tn7atm_send_complete(void *osSendInfo)
++{
++  Tn7AtmPrivate *priv;
++  //struct atm_dev *dev;
++  struct sk_buff *skb;
++  struct atm_vcc *vcc;
++  int chan;
++
++  dprintf(4, "tn7atm_send_complete()\n");
++
++
++  skb = (struct sk_buff *)osSendInfo;
++  //dev = (struct atm_dev *) (skb->dev);
++  priv = (Tn7AtmPrivate *)mydev->dev_data;
++  vcc =ATM_SKB(skb)->vcc;
++  if(vcc)
++  {
++    dprintf(4, "vcc->vci=%d\n",vcc->vci );
++    chan = tn7atm_lut_find(vcc->vpi, vcc->vci);
++    if(chan==ATM_NO_DMA_CHAN)
++      return 1;
++
++    /*decreament packet queued number */
++    spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
++    priv->lut[chan].tx_used_bufs[(int)skb->cb[47]] --;
++    if(priv->lut[chan].tx_used_bufs[1] < priv->lut[chan].tx_total_bufs - START_EMPTY_BUFF &&
++       priv->lut[chan].tx_used_bufs[0] < priv->lut[chan].tx_total_bufs - START_EMPTY_BUFF)
++    {
++      if(priv->lut[chan].netqueue_stop)
++      {
++        //printk("net queue restarted\n");
++        netif_wake_queue(priv->lut[chan].net_device);
++        priv->lut[chan].netqueue_stop = 0;
++      }
++    }
++    spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
++
++    if(vcc->pop)
++    {
++      dprintf(5, "free packet\n");
++      vcc->pop(vcc, skb);
++    }
++
++    
++  }
++    
++  
++
++  /* Update Stats: There may be a better place to do this, but this is a start */
++  priv->stats.tx_packets++;
++#ifdef CONFIG_LED_MODULE
++//    led_operation(MOD_ADSL, DEF_ADSL_ACTIVITY);           
++#endif
++
++  /* track number of buffer used */
++  
++  dprintf(4, "tn7atm_send_complete() done\n");
++
++  return 0;
++}
++
++void *tn7atm_allocate_rx_skb(void *os_dev, void **os_receive_info, unsigned int size)
++{
++  struct sk_buff *skb;
++  dprintf(4, "tn7atm_allocate_rx_skb size=%d\n", size);
++  size = ((size+3)&0xfffffffc);
++  skb = dev_alloc_skb(size);
++  if(skb==NULL)
++  {
++    //printk("rx allocate skb failed\n");
++    return NULL;
++  }
++  *os_receive_info = (void *)skb;
++  return (skb->data);
++}
++
++void tn7atm_free_rx_skb(void *skb)
++{
++  dprintf(4, "tn7atm_free_rx_skb\n");
++  tn7atm_kfree_skb((struct sk_buff *)skb);
++}
++
++
++int tn7atm_receive(void *os_dev, int ch, unsigned int packet_size, void *os_receive_info, void *data)
++{
++  Tn7AtmPrivate *priv;
++  struct atm_dev *dev;
++  struct sk_buff *skb;
++  struct atm_vcc *vcc;
++  
++
++  dprintf(4, "tn7atm_receive()\n");
++  dev = (struct atm_dev *)os_dev;
++
++  priv = (Tn7AtmPrivate *)dev->dev_data;
++
++  if(priv->lConnected != 1 || priv->lut[ch].ready == 0)
++  {
++    //printk("channel not ready\n");
++    return 1;
++  }
++
++  vcc = (struct atm_vcc *)priv->lut[ch].vcc;
++  if(vcc == NULL)
++  {
++    printk("vcc=Null");
++    return 1;
++  }
++
++
++  /* assume no fragment packet for now */
++  skb = (struct sk_buff *)os_receive_info;
++  
++  if(skb==NULL)
++  {
++    dprintf(1, "received empty skb.\n");
++    return 1;
++  }
++  /* see skbuff->cb definition in include/linux/skbuff.h */
++  ATM_SKB(skb)->vcc = vcc;
++
++  skb->len = packet_size;
++  dprintf(3, "skb:[0x%p]:0x%x pdu_len: 0x%04x\n",skb,skb->len,packet_size);
++  dprintf(3, "data location: 0x%x, 0x%x\n", (unsigned int)skb->data, (unsigned int)data);
++  
++  /*skb_trim(skb,skb->len); */   /* skb size is incorrect for large packets > 1428 bytes ?? */
++  __skb_trim(skb,skb->len); /* change to correct > 1500 ping when firewall is on */
++
++  dprintf(3, "pushing the skb...\n");
++  skb->stamp = xtime;
++
++  xdump((unsigned char *)skb->data, skb->len, 5);
++  
++  if(atm_charge(vcc, skb->truesize) == 0)
++  {
++    dprintf(1,"Receive buffers saturated for %d.%d.%d - PDU dropped\n", vcc->itf, vcc->vci, vcc->vpi);
++    return 1;
++  }
++
++  /*pass it up to kernel networking layer and update stats*/
++  vcc->push(vcc,skb);
++
++  /* Update receive packet stats */
++  priv->stats.rx_packets++;
++  atomic_inc(&vcc->stats->rx);
++
++#ifdef CONFIG_LED_MODULE
++//    led_operation(MOD_ADSL, DEF_ADSL_ACTIVITY);           
++#endif
++  dprintf(3, "(a) Receiving:vpi/vci[%d/%d] chan_id: %d  skb len:0x%x  skb truesize:0x%x\n",
++                vcc->vpi,vcc->vci,ch,skb->len, skb->truesize);
++  
++  return 0;
++}
++
++static int
++tn7atm_proc_channels(char* buf, char **start, off_t offset, int count,int *eof, void *data)
++{
++  int len = 0;
++  int limit = count - 80;
++  int i;
++
++  struct atm_dev *dev;
++  Tn7AtmPrivate *priv;
++
++  dev = (struct atm_dev *)data;
++  priv = (Tn7AtmPrivate *)dev->dev_data;
++
++  if(len<=limit)
++      len += sprintf(buf+len,"Chan  Inuse   ChanID   VPI     VCI \n");
++  if(len<=limit)
++      len += sprintf(buf+len,"------------------------------------------------------------------\n");
++
++  for(i=0; i < MAX_DMA_CHAN; i++)
++    {
++      if(len<=limit)
++        {
++          len += sprintf(buf+len, 
++                        " %02d    %05d   %05d   %05d   %05d \n",
++                        i,priv->lut[i].inuse,priv->lut[i].chanid,
++                        priv->lut[i].vpi,priv->lut[i].vci);
++        }
++    }
++
++  return len;
++}
++
++static int
++tn7atm_proc_private(char* buf, char **start, off_t offset, int count,int *eof, void *data)
++{
++  int len = 0;
++  int limit = count - 80;
++  struct atm_dev *dev;
++  Tn7AtmPrivate *priv;
++
++  dev = (struct atm_dev *)data;
++  priv = (Tn7AtmPrivate *)dev->dev_data;
++  
++  if(len<=limit)
++      len += sprintf(buf+len, "\nPrivate Data Structure(%s):\n",priv->name);
++  if(len<=limit)
++      len += sprintf(buf+len, "----------------------------------------\n");
++  if(len<=limit)
++      len += sprintf(buf+len, "priv:  0x%p\n",priv);
++  if(len<=limit)
++      len += sprintf(buf+len, "next:  0x%p",priv->next);
++  if(len<=limit)
++        len += sprintf(buf+len, "\tdev:   0x%p\n",priv->dev);
++ 
++  if(len<=limit)
++      len += sprintf(buf+len, "tx_irq: %02d",priv->sar_irq);
++  if(len<=limit)
++      len += sprintf(buf+len, "rx_irq: %02d",priv->dsl_irq);
++  
++
++  return len;
++}
++
++void tn7atm_sarhal_isr_register(void *os_dev, void *hal_isr, int interrupt_num)
++{
++  struct atm_dev *dev;
++  Tn7AtmPrivate *priv;
++
++  dprintf(4, "tn7atm_sarhal_isr_register()\n");
++
++  dev = (struct atm_dev *)os_dev;
++  priv = (Tn7AtmPrivate *)dev->dev_data;
++  priv->halIsr = (void *)hal_isr;
++  priv->int_num = interrupt_num;
++}
++
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_exit(void)
++ *
++ *  Description: Avalanche SAR exit function
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++
++static void
++tn7atm_exit (void)
++{
++
++  struct atm_dev        *dev;
++
++  Tn7AtmPrivate *priv;
++
++  dprintf(4, "tn7atm_exit()\n");
++
++  dev=mydev;
++  priv = (Tn7AtmPrivate *)dev->dev_data;
++  priv->lConnected = 0;
++  tn7dsl_exit();
++
++  tn7sar_exit(dev, priv);
++
++  /* freeup irq's */
++  free_irq(priv->dsl_irq,priv->dev);
++  free_irq(priv->sar_irq,priv->dev);
++  
++  kfree (dev->dev_data);
++
++  //    atm_dev_deregister (dev);
++  shutdown_atm_dev(dev);
++
++  /* remove proc entries */
++  remove_proc_entry("tiatm/avsar_ver",NULL);
++  remove_proc_entry("tiatm/avsar_modem_stats",NULL);
++  remove_proc_entry("tiatm/avsar_modem_training",NULL);
++  remove_proc_entry("tiatm/avsar_channels",NULL);
++  remove_proc_entry("tiatm/avsar_private",NULL);
++  remove_proc_entry("tiatm/avsar_sarhal_stats",NULL);
++  remove_proc_entry("tiatm/avsar_oam_ping",NULL);
++  remove_proc_entry("tiatm/avsar_pvc_table",NULL);
++  remove_proc_entry("tiatm",NULL);
++  tn7dsl_dslmod_sysctl_unregister();
++  
++  printk ("Module Removed\n");
++
++}
++
++
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_registration(struct tn7* tn7)
++ *
++ *  Description: ATM driver registration
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++
++static int __init
++tn7atm_register (Tn7AtmPrivate * priv)
++{
++  /* allocate memory for the device */
++
++  dprintf(4,"device %s being registered\n", priv->name);
++
++  mydev = atm_dev_register (priv->proc_name, &tn7atm_ops, -1, NULL);
++
++  if (mydev == NULL)
++    {
++      printk ("atm_dev_register returning NULL\n");     
++      return ATM_REG_FAILED;
++    }
++
++  printk ("registered device %s\n", priv->name);
++
++  mydev->dev_data = priv;       /* setup device data in atm_dev struct */
++  priv->dev = mydev;    /* setup atm_device in avalanche sar struct */
++
++  mydev->ci_range.vpi_bits = ATM_CI_MAX;        /* atm supports 11 bits */
++  mydev->ci_range.vci_bits = 16;        /* atm VCI max = 16 bits */
++
++  
++  return ATM_REG_OK;
++}
++
++static int 
++tn7atm_proc_version(char* buf, char **start, off_t offset, int count,int *eof, void *data)
++{
++  int len = 0;
++  char dslVer[8];
++  char dspVer[10];
++  char *pSarVer;
++  Tn7AtmPrivate *priv;
++  int i;
++  unsigned int pdspV1, pdspV2;
++
++  priv = mydev->dev_data;
++
++  len += sprintf(buf+len, "ATM Driver version:[%d.%02d.%02d.%02d]\n",LINUXATM_VERSION_MAJOR, LINUXATM_VERSION_MINOR,
++                                                                   LINUXATM_VERSION_BUGFIX, LINUXATM_VERSION_BUILDNUM);
++
++  tn7dsl_get_dslhal_version(dslVer);
++
++  len += sprintf(buf+len, "DSL HAL version: [%d.%02d.%02d.%02d]\n", dslVer[0], dslVer[1], dslVer[2],
++                                            dslVer[3]);
++  tn7dsl_get_dsp_version(dspVer);
++
++  len += sprintf(buf+len, "DSP Datapump version: [%d.%02d.%02d.%02d] ", dspVer[4], dspVer[5], dspVer[6],
++                                            dspVer[7]);
++  if(dspVer[8]==2) // annex B
++    len += sprintf(buf+len, "Annex B\n");
++  else if(dspVer[8]==3) //annex c
++    len += sprintf(buf+len, "Annex c\n");
++  else
++    len += sprintf(buf+len, "Annex A\n");
++
++  tn7sar_get_sar_version(priv, &pSarVer);
++
++  len += sprintf(buf+len, "SAR HAL version: [");
++  for(i=0;i<8;i++)
++  {
++    len += sprintf(buf+len, "%c", pSarVer[i+7]);
++  }
++  len += sprintf(buf+len, "]\n");
++
++  tn7sar_get_sar_firmware_version(&pdspV1, &pdspV2);
++  len += sprintf(buf+len, "PDSP Firmware version:[%01x.%02x]\n",
++                 pdspV1,pdspV2);
++
++  return len;
++}
++
++/*
++static struct net_device_stats
++*tn7atm_get_stats(struct atm_dev *dev)
++{
++  Tn7AtmPrivate *priv;
++  //unsigned long flags;
++
++  //spin_lock_irqsave(&priv->stats_lock,flags);
++  priv= (Tn7AtmPrivate *)dev->dev_data;
++  //spin_unlock_irqrestore(&priv->stats_lock,flags);
++  
++  return &priv->stats;
++  
++}
++*/
++/* Device detection */
++
++static int __init
++tn7atm_detect (void)
++{
++  Tn7AtmPrivate *priv;
++  //static struct proc_dir_entry *proc_dir;
++
++  dprintf(4, "tn7atm_detect().\n");
++  /* Device allocated as a global static structure at top of code "mydev" */
++
++  /* Alloc priv struct */
++  priv=kmalloc(sizeof(Tn7AtmPrivate),GFP_KERNEL);
++  if(!priv)
++    {
++      printk("unable to kmalloc priv structure. Killing autoprobe.\n");
++      return -ENODEV;
++    }
++  memset(priv, 0, sizeof(Tn7AtmPrivate));
++#ifdef COMMON_NSP
++  priv->name = "TI Avalanche SAR";
++  priv->proc_name = "avsar";
++#else
++  priv->name = "TI tnetd73xx ATM Driver";
++  priv->proc_name = "tn7";
++#endif
++
++  if ((tn7atm_register (priv)) == ATM_REG_FAILED)
++    return -ENODEV;
++
++  tn7atm_init(mydev);
++
++  /* Set up proc entry for atm stats */
++  proc_mkdir("tiatm", NULL);
++  create_proc_read_entry("tiatm/avsar_modem_stats",0,NULL,tn7dsl_proc_stats,NULL);
++  create_proc_read_entry("tiatm/avsar_modem_training",0,NULL,tn7dsl_proc_modem,NULL);
++  create_proc_read_entry("tiatm/avsar_ver",0,NULL,tn7atm_proc_version,NULL);
++  create_proc_read_entry("tiatm/avsar_channels",0,NULL,tn7atm_proc_channels,mydev);
++  create_proc_read_entry("tiatm/avsar_private",0,NULL,tn7atm_proc_private,mydev);
++  create_proc_read_entry("tiatm/avsar_sarhal_stats",0,NULL,tn7sar_proc_sar_stat,mydev);
++  create_proc_read_entry("tiatm/avsar_oam_ping",0,NULL,tn7sar_proc_oam_ping,mydev);
++  create_proc_read_entry("tiatm/avsar_pvc_table",0,NULL,tn7sar_proc_pvc_table,mydev);
++
++  tn7dsl_dslmod_sysctl_register();
++
++  printk("Texas Instruments ATM driver: version:[%d.%02d.%02d.%02d]\n",LINUXATM_VERSION_MAJOR, LINUXATM_VERSION_MINOR,
++                                                                   LINUXATM_VERSION_BUGFIX, LINUXATM_VERSION_BUILDNUM);
++  return 0;
++}
++
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_probe(void)
++ *
++ *  Description: Avalanche SAR driver probe (see net/atm/pvc.c)
++ *               this is utilized when the SAR driver is built
++ *               into the kernel and needs to be configured.
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++int __init tn7atm_probe(void)
++{
++  tn7atm_detect();
++  return -ENODEV;
++}
++
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int tn7atm_init(struct atm_dev *dev)
++ *
++ *  Description: Device Initialization
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++static int __init
++tn7atm_init(struct atm_dev *dev)
++{
++  Tn7AtmPrivate *priv;
++  char *ptr;
++
++  dprintf(4, "tn7atm_init()\n");
++
++  priv = (Tn7AtmPrivate *)dev->dev_data;
++
++  if(tn7sar_init(dev, priv) != 0)
++  {
++    printk("Failed to init SAR.\n");
++    return -ENODEV;
++  }
++
++  if(tn7dsl_init(priv) < 0)
++  {
++    printk("Failed to init DSL.\n");
++    return -ENODEV;
++  }
++  
++  if(tn7atm_get_ESI(dev) < 0)                 /* set ESI */  
++    return -ENODEV;
++
++  if(tn7atm_irq_request(dev) < 0)     
++    return -EBUSY;
++
++  priv->bTurboDsl = 1;
++  // read config for turbo dsl
++  ptr = prom_getenv("TurboDSL");
++  if(ptr)
++  {
++    priv->bTurboDsl = os_atoi(ptr);
++  }
++
++  return 0;
++}
++
++int tn7atm_device_connect_status(void *priv, int state)
++{
++  Tn7AtmPrivate *priv1;
++
++  dprintf(5, "tn7atm_device_connect_status()\n");
++  priv1 = (Tn7AtmPrivate *)priv;
++
++  priv1->lConnected = state;
++  dprintf(5, "priv1->lConnected=%d\n", priv1->lConnected);
++  return 0;
++}
++
++
++#ifdef MODULE
++module_init (tn7atm_detect);
++module_exit (tn7atm_exit);
++#endif /* MODULE */
+diff -urN linux.old/drivers/atm/sangam_atm/tn7atm.h linux.dev/drivers/atm/sangam_atm/tn7atm.h
+--- linux.old/drivers/atm/sangam_atm/tn7atm.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/tn7atm.h	2005-08-23 04:46:50.107842176 +0200
+@@ -0,0 +1,115 @@
++/* 
++ *    Tnetd73xx ATM driver.
++ *    by Zhicheng Tang, ztang@ti.com
++ *    2000 (c) Texas Instruments Inc.
++ *
++ *
++*/
++
++#ifndef __TN7ATM_H
++#define __TN7ATM_H
++
++//#include  "mips_support.h"
++#include  <linux/list.h>
++
++#define ATM_REG_OK 1
++#define ATM_REG_FAILED 0
++
++#define TX_SERVICE_MAX    32
++#define RX_SERVICE_MAX    20
++#define TX_BUFFER_NUM     64
++#define RX_BUFFER_NUM     28
++#define TX_QUEUE_NUM      2
++#define RX_BUFFER_SIZE    1582
++
++#define TX_DMA_CHAN       16    /* number of tx dma channels available */
++#define MAX_DMA_CHAN      16
++#define ATM_NO_DMA_CHAN   MAX_DMA_CHAN + 1  /* no tx dma channels available */
++#define ATM_SAR_INT       15
++#define ATM_SAR_INT_PACING_BLOCK_NUM 2
++#define ATM_DSL_INT       39
++
++#define CONFIG_ATM_TN7ATM_DEBUG 0 /* Debug level (0=no mtn7s 5=verbose) */
++
++#define TN7ATM_DEV(d)          ((struct tn7atm*)((d)->dev_data))
++
++
++/* Avalanche SAR state information */
++
++typedef enum tn7atm_state 
++{
++  TN7ATM_STATE_REGISTER             /* device registered */
++}tn7atm_state;
++
++typedef struct _sar_stat
++{
++  unsigned int txErrors;
++  unsigned int rxErrors;
++  unsigned int rxPktCnt;
++  unsigned int txPktCnt;
++  unsigned int rxBytes;
++  unsigned int txBytes;
++}sar_stat_t;
++
++/* Host based look up table to xref Channel Id's, VPI/VCI, LC, CID, packet type */
++typedef struct _tn7atm_tx_lut
++{
++  int         inuse;       /* is DMA channel available (1=y)  */
++  int         chanid;      /*  DMA channel ID   (0-0x1f) This corresponds to the Channel ID
++                              that is used in the connection config reg (TN7ATM_CONN_CONFIG) */
++  int         vpi;         /* Virtual path identifier         */
++  int         vci;         /* Virtual channel identifier      */
++  void        *vcc;
++  int         bClosing;
++  int         ready;
++  void        *net_device;
++  int         tx_total_bufs;
++  int         tx_used_bufs[2];
++  int         netqueue_stop;
++}tn7atm_lut_t;              
++
++/* per device data */
++
++typedef struct _tn7atm_private
++{
++  struct _tn7atm_private       *next;               /* next device */
++  struct atm_dev              *dev;                /* ATM device */
++  struct net_device_stats     stats;         /* Used to report Tx/Rx frames from ifconfig */
++  tn7atm_lut_t                 lut[MAX_DMA_CHAN];  /* Tx DMA look up table (LUT) */
++  int                         dsl_irq;            /* ATM SAR TransmitA interrupt number */
++  int                         sar_irq;            /* ATM SAR ReceiveA interrupt number */
++  char*                       name;                /* device name */
++  char*                       proc_name;           /* board name under /proc/atm */
++  unsigned int                available_cell_rate; /* cell rate */
++  unsigned int                connection_cell_rate; /* cell rate */
++  int                         lConnected;
++
++  /* Tnetd73xx CPHAL */
++  void                        *pSarHalDev;
++  void                        *pSarHalFunc;
++  void                        *pSarOsFunc;
++  void                        *halIsr;
++  int                         int_num;
++
++  /* turbo dsl */
++  int                          bTurboDsl;
++
++  /* spin lock for netifqueue */
++  spinlock_t                   netifqueueLock;
++  int                          netifqueueLockFlag;
++  int                          xmitStop; /* temp fix for SAR problem */
++}tn7atm_private_t, Tn7AtmPrivate;
++
++
++
++/* ATM adaptation layer id */
++typedef enum tn7atm_aal {
++    TN7ATM_AAL0  = 0,
++    TN7ATM_AAL2  = 2,
++    TN7ATM_AAL5  = 5,
++} tn7atm_aal_t;
++
++
++
++
++#endif
+diff -urN linux.old/drivers/atm/sangam_atm/tn7dsl.c linux.dev/drivers/atm/sangam_atm/tn7dsl.c
+--- linux.old/drivers/atm/sangam_atm/tn7dsl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/tn7dsl.c	2005-08-23 04:46:50.109841872 +0200
+@@ -0,0 +1,1780 @@
++/* 
++ *  $Id$
++ *
++ *   Avalanche SAR driver
++ *
++ *   Zhicheng Tang, ztang@ti.com
++ *   2000 (c) Texas Instruments Inc.
++ *
++ *
++*/
++#include <linux/config.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/atmdev.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/smp_lock.h>
++#include <asm/io.h>
++#include <asm/mips-boards/prom.h>
++#include <linux/proc_fs.h>
++#include <linux/string.h>
++#include <linux/ctype.h>
++#include <linux/sysctl.h>
++#include <linux/timer.h>
++#include <linux/vmalloc.h>
++#include <linux/file.h>
++#include <asm/uaccess.h>
++
++#include "tn7atm.h"
++#include "tn7api.h"
++#include "dsl_hal_api.h"
++
++#ifdef CONFIG_LED_MODULE
++#include <asm/ar7/ledapp.h>
++#define MOD_ADSL 1
++#define DEF_ADSL_IDLE     1
++#define DEF_ADSL_TRAINING 2
++#define DEF_ADSL_SYNC     3
++#define DEF_ADSL_ACTIVITY 4
++
++#define LED_NUM_1 3
++#define LED_NUM_2 4
++
++led_reg_t ledreg[2];
++
++static int led_on;
++#endif
++
++extern int  __guDbgLevel;
++extern sar_stat_t sarStat;
++static int dslInSync = 0;
++static int bMarginThConfig;
++static int bMarginRetrainEnable;
++static char EOCVendorID[8]= {0xb5, 0x00, 0x54, 0x53, 0x54, 0x43, 0x00, 0x00};
++
++#define TC_SYNC          1
++#define SYNC_TIME_DELAY  500000
++
++
++#define DEV_DSLMOD       1
++#define MAX_STR_SIZE     256
++#define DSL_MOD_SIZE     256
++
++#define TRUE   1
++#define FALSE  0
++
++
++enum
++{
++  NO_MODE,
++  MULTI_MODE,
++  T1413_MODE,
++  GDMT_MODE,
++  GLITE_MODE
++};
++
++
++
++/* a structure to store all information we need
++   for our thread */
++typedef struct kthread_struct
++{
++  /* private data */
++
++  /* Linux task structure of thread */
++  struct task_struct *thread;
++  /* Task queue need to launch thread */
++  struct tq_struct tq;
++  /* function to be started as thread */
++  void (*function) (struct kthread_struct *kthread);
++  /* semaphore needed on start and creation of thread. */
++  struct semaphore startstop_sem;
++
++  /* public data */
++
++  /* queue thread is waiting on. Gets initialized by
++  init_kthread, can be used by thread itself.
++  */
++  wait_queue_head_t queue;
++  /* flag to tell thread whether to die or not.
++    When the thread receives a signal, it must check
++    the value of terminate and call exit_kthread and terminate
++    if set.
++  */
++  int terminate;
++  /* additional data to pass to kernel thread */
++  void *arg;
++} kthread_t;
++
++#ifndef ADIAG
++#define DSP_FIRMWARE_PATH "/lib/modules/ar0700xx.bin"
++#else
++#define DSP_FIRMWARE_PATH "/var/tmp/ar0700xx_diag.bin"
++#endif
++
++/* externs */
++extern struct atm_dev *mydev;
++extern unsigned int oamFarLBCount[4];
++extern int dslhal_support_restoreTrainingInfo(PITIDSLHW_T pIhw);
++/* gloabal functions */
++
++/* end of global functions */
++
++/* module wide declars */
++static PITIDSLHW_T    pIhw;
++static char    mod_req[16]={'\t'};
++static volatile int bshutdown; 
++static char info[MAX_STR_SIZE];
++static DECLARE_MUTEX_LOCKED(adsl_sem_overlay); /* Used for DSL Polling enable     */
++kthread_t overlay_thread;
++/* end of module wide declars */
++
++/* Internal Functions */
++static void tn7dsl_chng_modulation(void* data);
++static void tn7dsl_set_modulation(void* data);
++static int tn7dsl_reload_overlay(void);
++static int dslmod_sysctl(ctl_table *ctl, int write, struct file * filp, void *buffer, size_t *lenp);
++static void tn7dsl_register_dslss_led(void);
++void tn7dsl_dslmod_sysctl_register(void);
++void tn7dsl_dslmod_sysctl_unregister(void);
++/* end of internal functions */
++
++
++
++
++
++/* prototypes */
++
++/* start new kthread (called by creator) */
++void start_kthread(void (*func)(kthread_t *), kthread_t *kthread);
++
++/* stop a running thread (called by "killer") */
++void stop_kthread(kthread_t *kthread);
++
++/* setup thread environment (called by new thread) */
++void init_kthread(kthread_t *kthread, char *name);
++
++/* cleanup thread environment (called by thread upon receiving termination signal) */
++void exit_kthread(kthread_t *kthread);
++
++
++
++/* private functions */
++static void kthread_launcher(void *data)
++{
++        kthread_t *kthread = data;
++        kernel_thread((int (*)(void *))kthread->function, (void *)kthread, 0);
++        
++}
++
++/* public functions */
++
++/* create a new kernel thread. Called by the creator. */
++void start_kthread(void (*func)(kthread_t *), kthread_t *kthread)
++{
++        /* initialize the semaphore:
++           we start with the semaphore locked. The new kernel
++           thread will setup its stuff and unlock it. This
++           control flow (the one that creates the thread) blocks
++           in the down operation below until the thread has reached
++           the up() operation.
++         */
++        //init_MUTEX_LOCKED(&kthread->startstop_sem);
++
++        /* store the function to be executed in the data passed to
++           the launcher */
++        kthread->function=func;
++        
++        /* create the new thread my running a task through keventd */
++
++        /* initialize the task queue structure */
++        kthread->tq.sync = 0;
++        INIT_LIST_HEAD(&kthread->tq.list);
++        kthread->tq.routine =  kthread_launcher;
++        kthread->tq.data = kthread;
++
++        /* and schedule it for execution */
++        schedule_task(&kthread->tq);
++
++        /* wait till it has reached the setup_thread routine */
++        //down(&kthread->startstop_sem);
++               
++}
++
++/* stop a kernel thread. Called by the removing instance */
++void stop_kthread(kthread_t *kthread)
++{
++        if (kthread->thread == NULL)
++        {
++                printk("stop_kthread: killing non existing thread!\n");
++                return;
++        }
++
++        /* this function needs to be protected with the big
++       kernel lock (lock_kernel()). The lock must be
++           grabbed before changing the terminate
++       flag and released after the down() call. */
++        lock_kernel();
++        
++        /* initialize the semaphore. We lock it here, the
++           leave_thread call of the thread to be terminated
++           will unlock it. As soon as we see the semaphore
++           unlocked, we know that the thread has exited.
++    */
++        //init_MUTEX_LOCKED(&kthread->startstop_sem);
++
++        /* We need to do a memory barrier here to be sure that
++           the flags are visible on all CPUs. 
++        */
++        mb();
++
++        /* set flag to request thread termination */
++        kthread->terminate = 1;
++
++        /* We need to do a memory barrier here to be sure that
++           the flags are visible on all CPUs. 
++        */
++        mb();
++        kill_proc(kthread->thread->pid, SIGKILL, 1);
++       
++        /* block till thread terminated */
++        //down(&kthread->startstop_sem);
++
++        /* release the big kernel lock */
++        unlock_kernel();
++
++        /* now we are sure the thread is in zombie state. We
++           notify keventd to clean the process up.
++        */
++        kill_proc(2, SIGCHLD, 1);
++
++}
++
++/* initialize new created thread. Called by the new thread. */
++void init_kthread(kthread_t *kthread, char *name)
++{
++        /* lock the kernel. A new kernel thread starts without
++           the big kernel lock, regardless of the lock state
++           of the creator (the lock level is *not* inheritated)
++        */
++        lock_kernel();
++
++        /* fill in thread structure */
++        kthread->thread = current;
++
++        /* set signal mask to what we want to respond */
++        siginitsetinv(&current->blocked, sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM));
++
++        /* initialise wait queue */
++        init_waitqueue_head(&kthread->queue);
++
++        /* initialise termination flag */
++        kthread->terminate = 0;
++
++        /* set name of this process (max 15 chars + 0 !) */
++        sprintf(current->comm, name);
++        
++        /* let others run */
++        unlock_kernel();
++
++        /* tell the creator that we are ready and let him continue */
++        //up(&kthread->startstop_sem);
++
++}
++
++/* cleanup of thread. Called by the exiting thread. */
++void exit_kthread(kthread_t *kthread)
++{
++        /* we are terminating */
++
++    /* lock the kernel, the exit will unlock it */
++        lock_kernel();
++        kthread->thread = NULL;
++        mb();
++
++        /* notify the stop_kthread() routine that we are terminating. */
++    //up(&kthread->startstop_sem);
++    /* the kernel_thread that called clone() does a do_exit here. */
++
++    /* there is no race here between execution of the "killer" and real termination
++       of the thread (race window between up and do_exit), since both the
++       thread and the "killer" function are running with the kernel lock held.
++       The kernel lock will be freed after the thread exited, so the code
++       is really not executed anymore as soon as the unload functions gets
++       the kernel lock back.
++       The init process may not have made the cleanup of the process here,
++       but the cleanup can be done safely with the module unloaded.
++    */
++
++}
++
++
++
++int os_atoi(const char *pStr)
++{
++  int retVal = -1;
++
++  if(*pStr=='-')
++    retVal =  -simple_strtoul(pStr+1, (char **)NULL, 10);
++  else
++    retVal =  simple_strtoul(pStr, (char **)NULL, 10);  
++  return retVal ;
++}
++
++
++int os_atoh(const char *pStr)
++{
++  int retVal = -1;
++
++  if(*pStr=='-')
++    retVal =  -simple_strtoul(pStr+1, (char **)NULL, 16);
++  else
++    retVal =  simple_strtoul(pStr, (char **)NULL, 16);  
++  return retVal ;
++}
++
++unsigned long os_atoul(const char *pStr)
++{
++  unsigned long retVal = -1;
++
++  retVal =  simple_strtoul(pStr, (char **)NULL, 10);  
++  return retVal ;
++}
++
++void dprintf( int uDbgLevel, char * szFmt, ...)
++{
++#ifdef DEBUG_BUILD
++    static char     buff[256];
++    va_list  ap; 
++
++    if( __guDbgLevel < uDbgLevel) 
++        return;
++
++    va_start( ap, szFmt); 
++    vsprintf((char *)buff, szFmt, ap); 
++    va_end(ap); 
++    printk("%s", buff);
++#endif
++}
++
++/*int strcmp(const char *s1, const char *s2)
++{
++
++  int i=0;
++  
++  while(s1[i] !=0)
++  {
++    if(s2[i]==0)
++      return -1;
++    if(s1[i] != s2[i])
++      return 1;
++    i++;
++  }
++  if(s2[i] != 0)
++    return 1;
++  return 0;
++}
++*/
++
++int shim_osLoadFWImage(unsigned char *ptr)
++{
++  unsigned int bytesRead;
++  mm_segment_t  oldfs;  
++  static struct file *filp;
++  unsigned int imageLength=0x4ffff;  
++   
++    
++  dprintf(4, "tn7dsl_read_dsp()\n");
++
++  dprintf(4,"open file %s\n", DSP_FIRMWARE_PATH);
++  
++  filp=filp_open(DSP_FIRMWARE_PATH
++                                  ,00,O_RDONLY);
++      
++  if(filp ==NULL)
++  {
++    printk("Failed: Could not open DSP binary file\n");
++          return -1;
++  }
++      
++  if (filp->f_op->read==NULL)
++          return -1;  /* File(system) doesn't allow reads */
++
++        /* Now read bytes from postion "StartPos" */
++        filp->f_pos = 0;
++  oldfs = get_fs();
++        set_fs(KERNEL_DS);
++        bytesRead = filp->f_op->read(filp,ptr,imageLength,&filp->f_pos);
++
++  dprintf(4,"file length = %d\n", bytesRead);
++
++  set_fs(oldfs);
++
++        /* Close the file */
++        fput(filp); 
++    
++  return bytesRead;
++}
++
++unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength)
++{
++  unsigned int bytesRead;
++  mm_segment_t  oldfs;  
++  struct file *filp;
++  
++  dprintf(4,"shim_read_overlay_page\n");
++  //dprintf(4,"sec offset=%d, sec length =%d\n", secOffset, secLength);
++  
++  filp=filp_open(DSP_FIRMWARE_PATH,00,O_RDONLY);  
++  if(filp ==NULL)
++  {
++    printk("Failed: Could not open DSP binary file\n");
++          return -1;
++  }
++      
++  if (filp->f_op->read==NULL)
++          return -1;  /* File(system) doesn't allow reads */
++
++  /* Now read bytes from postion "StartPos" */
++
++  if(filp->f_op->llseek)
++    filp->f_op->llseek(filp,secOffset, 0);
++  oldfs = get_fs();
++  set_fs(KERNEL_DS);
++  filp->f_pos = secOffset;
++  bytesRead = filp->f_op->read(filp,ptr,secLength,&filp->f_pos);
++
++  set_fs(oldfs);
++   /* Close the file */
++  fput(filp);  
++  return bytesRead;
++}
++
++int shim_osLoadDebugFWImage(unsigned char *ptr)
++{
++  return 0;
++}
++int shim_osStringCmp(const char *s1, const char *s2)
++{
++  return strcmp(s1, s2);
++}
++
++void *shim_osAllocateMemory(unsigned int size)
++{
++  return ((void *)kmalloc(size, GFP_KERNEL));
++}
++
++void *shim_osAllocateDmaMemory(unsigned int size)
++{
++  /*
++  int order;
++
++  order=1;
++  size=size/4096;
++  while(size >= 1)
++  {
++    order++;
++    size=size/2;
++  }
++
++  return ( (void *)__get_free_pages(GFP_ATOMIC, order));
++  */
++  //return ((void *)kmalloc(size, GFP_ATOMIC));
++  //return ((void *)kmalloc(size, GFP_KERNEL));
++  void *ptr;
++
++  ptr = kmalloc(size, GFP_ATOMIC);
++  if(ptr==NULL)
++  {
++    printk("failed atomic\n");
++    ptr = kmalloc(size, GFP_KERNEL);
++    if(ptr==NULL)
++    {
++      printk("failed kernel\n");
++      ptr = kmalloc(size, GFP_KERNEL|GFP_DMA);
++    }
++  }
++  printk("size=%d\n", size);
++  return ptr;
++
++}
++
++
++void shim_osFreeMemory(void *ptr, unsigned int size)
++{
++  
++  kfree(ptr);
++}
++
++void shim_osFreeDmaMemory(void *ptr, unsigned int size)
++{
++/*
++  int order;
++
++  order=1;
++  size=size/4096;
++  while(size >=1)
++  {
++    order++;
++    size=size/2;
++  }
++  free_pages(ptr, order);
++*/
++  kfree(ptr);
++}
++
++void *shim_osAllocateVMemory(unsigned int size)
++{
++
++  return ((void *)vmalloc(size));
++}
++
++void shim_osFreeVMemory(void *ptr, unsigned int size)
++{
++  vfree(ptr);
++}
++
++void shim_osMoveMemory(char *dst, char *src, unsigned int numBytes)
++{
++  memcpy(dst, src, numBytes);
++}
++
++void shim_osZeroMemory(char *dst, unsigned int numBytes)
++{
++  memset(dst, 0, numBytes);
++}
++
++void shim_osWriteBackCache(void *addr, unsigned int size)
++{
++  unsigned int i,Size=(((unsigned int)addr)&0xf)+size;
++
++  for (i=0;i<Size;i+=16,addr+=16)
++  {
++    __asm__(" .set mips3 ");
++    __asm__(" cache  25, (%0)" : : "r" (addr));
++    __asm__(" .set mips0 ");
++  }
++}
++
++void shim_osInvalidateCache(void *addr, unsigned int size)
++{
++  unsigned int i,Size=(((unsigned int)addr)&0xf)+size;
++
++  for (i=0;i<Size;i+=16,addr+=16)
++  {
++    __asm__(" .set mips3 ");
++    __asm__("cache  17, (%0)" : : "r" (addr));
++    __asm__(" .set mips0 ");
++  }
++}
++
++void shim_osClockWait(int val)
++{
++  unsigned int chkvalue;
++  chkvalue=val/64;
++  
++  if(chkvalue > 1000)
++    {
++      mdelay(chkvalue/1000);
++      return;
++    }
++  else
++    udelay(val/64);
++} /* end of cwait() */
++
++unsigned int shim_osClockTick(int val)
++{
++  return jiffies;
++}
++
++int flags;
++spinlock_t shimLock;
++
++void shim_osCriticalEnter(void)
++{
++  spin_lock_irqsave(&shimLock, flags);
++
++}
++
++
++void shim_osCriticalExit(void)
++{
++  spin_unlock_irqrestore(&shimLock, flags);
++}
++
++
++int tn7dsl_proc_stats(char* buf, char **start, off_t offset, int count,
++                 int *eof, void *data)
++{
++  
++  int len = 0;
++  int limit = count - 80;
++  int F4count, F5count;
++  
++  
++  /* Read Ax5 Stats */
++  dslhal_api_gatherStatistics(pIhw);
++  
++  if(len<=limit)
++    len += sprintf(buf+len, "\nAR7 DSL Modem Statistics:\n");
++  if(len<=limit)
++    len += sprintf(buf+len, "--------------------------------\n");
++  /* us and ds Connection Rates */
++  if(len<=limit)
++    len += sprintf(buf+len, "[DSL Modem Stats]\n");
++
++
++  if(len<=limit)
++  {
++    if(pIhw->lConnected != 1)
++    {
++      pIhw->AppData.USConRate = 0;
++      pIhw->AppData.DSConRate = 0;
++    }
++    len += sprintf(buf+len, "\tUS Connection Rate:\t%u\tDS Connection Rate:\t%u\n",
++                   (unsigned int)pIhw->AppData.USConRate,
++                   (unsigned int)pIhw->AppData.DSConRate );
++  }
++  if(len<=limit)
++    len += sprintf(buf+len, "\tDS Line Attenuation:\t%u\tDS Margin:\t\t%u\n",
++                   (unsigned int)pIhw->AppData.dsLineAttn/2,
++                   (unsigned int)pIhw->AppData.dsMargin/2 );
++  if(len<=limit)
++    len += sprintf(buf+len, "\tUS Line Attenuation:\t%u\tUS Margin:\t\t%u\n",
++                   (unsigned int)pIhw->AppData.usLineAttn,
++                   (unsigned int)pIhw->AppData.usMargin );
++  if(len<=limit)
++    len += sprintf(buf+len, "\tUS Payload :\t\t%u\tDS Payload:\t\t%u\n",
++                   ((unsigned int)pIhw->AppData.usAtm_count[0] + (unsigned int)pIhw->AppData.usAtm_count[1])*48,
++                   ((unsigned int)pIhw->AppData.dsGood_count[0] + (unsigned int)pIhw->AppData.dsGood_count[1])*48);
++  /* Superframe Count */
++  if(len<=limit)
++    len += sprintf(buf+len, "\tUS Superframe Cnt :\t%u\tDS Superframe Cnt:\t%u\n",
++                   (unsigned int)pIhw->AppData.usSuperFrmCnt,
++                   (unsigned int)pIhw->AppData.dsSuperFrmCnt );
++
++  /* US and DS power */
++  if(len<=limit)
++    len += sprintf(buf+len, "\tUS Transmit Power :\t%u\tDS Transmit Power:\t%u\n",
++                   (unsigned int)pIhw->AppData.usTxPower/256,
++                   (unsigned int)pIhw->AppData.dsTxPower/256 );
++  /* DSL Stats Errors*/  
++  if(len<=limit)
++    len += sprintf(buf+len, "\tLOS errors:\t\t%u\tSEF errors:\t\t%u\n",
++                   (unsigned int)pIhw->AppData.LOS_errors,
++                   (unsigned int)pIhw->AppData.SEF_errors );
++  if(len<=limit)
++    len += sprintf(buf+len, "\tFrame mode:\t\t%u\tMax Frame mode:\t\t%u\n",
++                   (unsigned int)pIhw->AppData.FrmMode,
++                   (unsigned int)pIhw->AppData.MaxFrmMode );
++  if(len<=limit)
++    len += sprintf(buf+len, "\tTrained Path:\t\t%u\tUS Peak Cell Rate:\t%u\n",
++                   (unsigned int)pIhw->AppData.TrainedPath,
++                   (unsigned int)pIhw->AppData.USConRate*1000/8/53 );
++  if(len<=limit)
++    len += sprintf(buf+len, "\tTrained Mode:\t\t%u\tSelected Mode:\t\t%u\n",
++                   (unsigned int)pIhw->AppData.TrainedMode, (unsigned int)pIhw->AppData.StdMode );
++
++  if(len<=limit)
++    len += sprintf(buf+len, "\tATUC Vendor ID:\t%u\tATUC Revision:\t\t%u\n",
++                   (unsigned int)pIhw->AppData.atucVendorId, pIhw->AppData.atucRevisionNum);
++  if(len<=limit)
++    len += sprintf(buf+len, "\tHybrid Selected:\t%u\n",
++                   (unsigned int)pIhw->AppData.currentHybridNum);
++ 
++  /* Upstream Interleaved Errors */
++  if(len<=limit)
++    len += sprintf(buf+len, "\n\t[Upstream (TX) Interleave path]\n");
++  if(len<=limit)
++    len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
++                   (unsigned int)pIhw->AppData.usICRC_errors,
++                   (unsigned int)pIhw->AppData.usIFEC_errors,
++                   (unsigned int)pIhw->AppData.usINCD_error);
++  if(len<=limit)
++    len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
++                   (unsigned int)pIhw->AppData.usILCD_errors,
++                   (unsigned int)pIhw->AppData.usIHEC_errors);
++  /* Downstream Interleaved Errors */
++  if(len<=limit)
++    len += sprintf(buf+len, "\n\t[Downstream (RX) Interleave path]\n");
++  if(len<=limit)
++    len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
++                   (unsigned int)pIhw->AppData.dsICRC_errors,
++                   (unsigned int)pIhw->AppData.dsIFEC_errors,
++                   (unsigned int)pIhw->AppData.dsINCD_error);
++  if(len<=limit)
++    len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
++                   (unsigned int)pIhw->AppData.dsILCD_errors,
++                   (unsigned int)pIhw->AppData.dsIHEC_errors);
++  /* Upstream Fast Errors */
++  if(len<=limit)
++    len += sprintf(buf+len, "\n\t[Upstream (TX) Fast path]\n");
++  if(len<=limit)
++    len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
++                   (unsigned int)pIhw->AppData.usFCRC_errors,
++                   (unsigned int)pIhw->AppData.usFFEC_errors,
++                   (unsigned int)pIhw->AppData.usFNCD_error);
++  if(len<=limit)
++    len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
++                   (unsigned int)pIhw->AppData.usFLCD_errors,
++                   (unsigned int)pIhw->AppData.usFHEC_errors);
++  /* Downstream Fast Errors */
++  if(len<=limit)
++    len += sprintf(buf+len, "\n\t[Downstream (RX) Fast path]\n");
++  if(len<=limit)
++    len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
++                   (unsigned int)pIhw->AppData.dsFCRC_errors,
++                   (unsigned int)pIhw->AppData.dsFFEC_errors,
++                   (unsigned int)pIhw->AppData.dsFNCD_error);
++  if(len<=limit)
++    len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
++                   (unsigned int)pIhw->AppData.dsFLCD_errors,
++                   (unsigned int)pIhw->AppData.dsFHEC_errors);
++  /* ATM stats upstream */
++  if(len<=limit)
++    len += sprintf(buf+len, "\n[ATM Stats]");
++  if(len<=limit)
++    len += sprintf(buf+len, "\n\t[Upstream/TX]\n");
++  if(len<=limit)
++    len += sprintf(buf+len, "\tGood Cell Cnt:\t%u\n\tIdle Cell Cnt:\t%u\n\n",
++                   (unsigned int)pIhw->AppData.usAtm_count[0] + (unsigned int)pIhw->AppData.usAtm_count[1],
++                   (unsigned int)pIhw->AppData.usIdle_count[0] + (unsigned int)pIhw->AppData.usIdle_count[1]);
++  /* ATM stats downstream */
++  if(len<=limit)
++    len += sprintf(buf+len, "\n\t[Downstream/RX)]\n");
++  if(len<=limit)
++    len += sprintf(buf+len, "\tGood Cell Cnt:\t%u\n\tIdle Cell Cnt:\t%u\n\tBad Hec Cell Cnt:\t%u\n",
++                   (unsigned int)pIhw->AppData.dsGood_count[0] + (unsigned int)pIhw->AppData.dsGood_count[1],
++                   (unsigned int)pIhw->AppData.dsIdle_count[0] + (unsigned int)pIhw->AppData.dsIdle_count[1],
++                   (unsigned int)pIhw->AppData.dsBadHec_count[0] + (unsigned int)pIhw->AppData.dsBadHec_count[1]);
++  if(len<=limit)
++    len += sprintf(buf+len, "\tOverflow Dropped Cell Cnt:\t%u\n",
++                   (unsigned int)pIhw->AppData.dsOVFDrop_count[0] + (unsigned int)pIhw->AppData.dsOVFDrop_count[1]);
++  tn7sar_get_stats(pIhw->pOsContext);
++  if(len<=limit)
++    len += sprintf(buf+len, "\n[SAR AAL5 Stats]\n");
++  if(len<=limit)
++    len += sprintf(buf+len, "\tTx PDU's:\t%u\n\tRx PDU's:\t%u\n",
++                   sarStat.txPktCnt,
++                   sarStat.rxPktCnt);
++  if(len<=limit)
++    len += sprintf(buf+len, "\tTx Total Bytes:\t%u\n\tRx Total Bytes:\t%u\n",
++                   sarStat.txBytes,
++                   sarStat.rxBytes);
++  if(len<=limit)
++    len += sprintf(buf+len, "\tTx Total Error Counts:\t%u\n\tRx Total Error Counts:\t%u\n\n",
++                   sarStat.txErrors,
++                   sarStat.rxErrors);
++
++  /* oam loopback info */
++  if(len<=limit)
++    len += sprintf(buf+len, "\n[OAM Stats]\n");
++
++  tn7sar_get_near_end_loopback_count(&F4count, &F5count);
++
++  if(len<=limit)
++    {
++    len += sprintf(buf+len, "\tNear End F5 Loop Back Count:\t%u\n\tNear End F4 Loop Back Count:\t%u\n\tFar End F5 Loop Back Count:\t%u\n\tFar End F4 Loop Back Count:\t%u\n",
++                  F5count,
++                  F4count,
++                  oamFarLBCount[0] + oamFarLBCount[2],
++                  oamFarLBCount[1] + oamFarLBCount[3]);
++    }
++  return len;
++}
++
++int
++tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count,
++                 int *eof, void *data)
++{
++  
++  int len = 0;
++  int limit = count - 80;
++
++  char *state;
++  int tag;
++   
++  tag= dslhal_api_pollTrainingStatus(pIhw);
++  tag = pIhw->AppData.bState;
++  
++  switch(tag){
++    case 0:       state = "ACTREQ";     break;
++    case 1:       state = "QUIET1";     break;
++    case 2:       state = "IDLE";       break;
++    case 3:       state = "INIT";       break;
++    case 4:       state = "RTDL";       break;
++    case 5:       state = "SHOWTIME";   break;
++    default:      state = "unknown";    break;
++  }
++  
++  if(pIhw->lConnected == 1)
++    state = "SHOWTIME";
++  if(len<=limit)
++    len += sprintf(buf+len,"%s\n",state);
++  
++  return len;
++}
++
++
++
++int tn7dsl_handle_interrupt(void)
++{
++  int intsrc;
++  unsigned char cMsgRa[6];
++  short margin;
++
++  dprintf(4, "tn7dsl_handle_dsl_interrupt()\n");
++  if(pIhw)
++  {
++    intsrc=dslhal_api_acknowledgeInterrupt(pIhw);
++    dslhal_api_handleTrainingInterrupt(pIhw, intsrc);
++
++    if(pIhw->lConnected == TC_SYNC)
++    {
++      
++      if(dslInSync == 0)
++      {
++        printk("DSL in Sync\n");
++        tn7atm_device_connect_status(pIhw->pOsContext, 1);
++        dslhal_api_initStatistics(pIhw);
++        dslhal_api_gatherStatistics(pIhw);
++#ifdef CONFIG_LED_MODULE
++//        led_operation(MOD_ADSL, DEF_ADSL_SYNC);           
++        led_on = DEF_ADSL_SYNC;
++#endif
++        /* add auto margin retrain */
++        if(pIhw->AppData.TrainedMode < 5)
++        {
++          if(bMarginRetrainEnable && bMarginThConfig == 0)
++          {
++            dslhal_support_getCMsgsRa(pIhw, cMsgRa);
++            margin = *(unsigned short *)&cMsgRa[4];
++            margin = (margin >> 6) & 0x3f;
++            if(margin & 0x20) // highest bit is 1
++            {
++              margin = -(margin & 0x1f);
++            }
++          
++            //printk("margin = %d, cmsg-ra = %02x %02x %02x %02x %02x %02x\n", margin, cMsgRa[0],cMsgRa[1],cMsgRa[2],cMsgRa[3],cMsgRa[4],cMsgRa[5]);
++            dslhal_api_setMarginThreshold(pIhw, margin*2); /* DSL margin is in 0.5db */
++          }
++        }
++
++      }
++      dslInSync = 1;
++    }
++    else
++    {
++      if(dslInSync == 1)
++      {
++        dslInSync = 0;
++        tn7atm_device_connect_status(pIhw->pOsContext, 0);
++        up(&adsl_sem_overlay);
++        printk("DSL out of syn\n");
++      }
++#ifdef CONFIG_LED_MODULE
++      if(pIhw->AppData.bState < RSTATE_INIT)
++      {
++        if(led_on != DEF_ADSL_IDLE)
++        {
++//          led_operation(MOD_ADSL, DEF_ADSL_IDLE);           
++          led_on = DEF_ADSL_IDLE;
++        }
++      }
++      else
++      {
++        if(led_on != DEF_ADSL_TRAINING)
++        {
++//          led_operation(MOD_ADSL, DEF_ADSL_TRAINING);           
++          led_on = DEF_ADSL_TRAINING;
++        }
++
++      }
++      
++#endif
++
++    }
++  }
++  return 0;
++}
++
++
++int tn7dsl_get_dslhal_version(char *pVer)
++{
++  dslVer ver;
++
++  dslhal_api_getDslHalVersion(&ver);
++
++  memcpy(pVer,&ver,8);
++  return 0;
++}
++
++int tn7dsl_get_dsp_version(char *pVer)
++{
++  dspVer ver;
++  dslhal_api_getDspVersion(pIhw, &ver);
++  memcpy(pVer, &ver, 9);
++  return 0;
++}
++
++
++static int
++tn7dsl_get_modulation(void)
++{
++  char  *ptr = NULL;
++  
++  dprintf(4, "tn7dsl_get_modulation\n");
++  //printk("tn7dsl_get_modulation\n");
++  ptr = prom_getenv("modulation");
++
++  if (!ptr) {
++    //printk("modulation is not set in adam2 env\n");
++    //printk("Using multimode\n");
++    return 0;
++  }
++  printk("dsl modulation = %s\n", ptr);
++
++  tn7dsl_set_modulation(ptr);
++
++  return 0;
++}
++
++
++static int tn7dsl_set_dsl(void)
++{
++
++  char  *ptr = NULL;
++  int value;
++  int i, offset[2]={4,11},oamFeature=0;
++  char tmp[4];
++  char dspVer[10];
++ 
++  // OAM Feature Configuration
++  dslhal_api_dspInterfaceRead(pIhw,(unsigned int)pIhw->pmainAddr, 2, (unsigned int *)&offset, (unsigned char *)&oamFeature, 4);
++  oamFeature |= dslhal_support_byteSwap32(0x0000000C);
++  dslhal_api_dspInterfaceWrite(pIhw,(unsigned int)pIhw->pmainAddr, 2, (unsigned int *)&offset, (unsigned char *)&oamFeature, 4);
++
++  // modulation 
++  ptr = prom_getenv("modulation");
++  if (ptr) 
++  {
++    printk("dsl modulation = %s\n", ptr);
++    tn7dsl_set_modulation(ptr);  
++  }
++
++  // margin retrain
++  ptr = NULL;
++  ptr = prom_getenv("enable_margin_retrain");
++  if(ptr)
++  {
++    value = os_atoi(ptr);
++    if(value == 1)
++    {
++      dslhal_api_setMarginMonitorFlags(pIhw, 0, 1);
++      bMarginRetrainEnable = 1;
++      printk("enable showtime margin monitor.\n");
++      ptr = NULL;
++      ptr = prom_getenv("margin_threshold");
++      if(ptr)
++      {
++        value = os_atoi(ptr);
++        printk("Set margin threshold to %d x 0.5 db\n",value);
++        if(value >= 0)
++        {
++          dslhal_api_setMarginThreshold(pIhw, value);
++          bMarginThConfig=1;
++        }
++      }
++    }
++  }
++
++  // rate adapt
++  ptr = NULL;
++  ptr = prom_getenv("enable_rate_adapt");
++  if(ptr)
++  {
++    dslhal_api_setRateAdaptFlag(pIhw, os_atoi(ptr));
++  }
++
++  // trellis
++  ptr = NULL;
++  ptr = prom_getenv("enable_trellis");
++  if(ptr)
++  {
++    dslhal_api_setTrellisFlag(pIhw, os_atoi(ptr));
++  }
++
++  // maximum bits per carrier
++  ptr = NULL;
++  ptr = prom_getenv("maximum_bits_per_carrier");
++  if(ptr)
++  {
++    dslhal_api_setMaxBitsPerCarrier(pIhw, os_atoi(ptr));
++  }
++
++  // maximum interleave depth
++  ptr = NULL;
++  ptr = prom_getenv("maximum_interleave_depth");
++  if(ptr)
++  {
++    dslhal_api_setMaxInterleaverDepth(pIhw, os_atoi(ptr));
++  }
++
++  // inner and outer pairs
++  ptr = NULL;
++  ptr = prom_getenv("pair_selection");
++  if(ptr)
++  {
++    dslhal_api_selectInnerOuterPair(pIhw, os_atoi(ptr));
++  }
++  
++  ptr = NULL;
++  ptr = prom_getenv("dgas_polarity");
++  if(ptr)
++  {
++    dslhal_api_configureDgaspLpr(pIhw, 1, 1);
++    dslhal_api_configureDgaspLpr(pIhw, 0, os_atoi(ptr));
++  }
++
++  ptr = NULL;
++  ptr = prom_getenv("los_alarm");
++  if(ptr)
++  {
++    dslhal_api_disableLosAlarm(pIhw, os_atoi(ptr));
++  }
++
++  ptr = NULL;
++  ptr = prom_getenv("eoc_vendor_id");
++  if(ptr)
++  {
++    for(i=0;i<8;i++)
++    {
++      tmp[0]=ptr[i*2];
++      tmp[1]=ptr[i*2+1];
++      tmp[2]=0;
++      EOCVendorID[i] = os_atoh(tmp);
++      //printk("tmp=%s--", tmp);
++      //printk("ID[%d]=0x%02x ", i, (unsigned char)EOCVendorID[i]);
++    }
++    tn7dsl_get_dsp_version(dspVer);
++    //printk("Annex =%d\n", dspVer[8]);
++    if(dspVer[8]==2) // annex b
++    {
++      //printk("EOCVendorID=%02x %02x %02x %02x %02x %02x %02x %02x\n", EOCVendorID[0], EOCVendorID[1], EOCVendorID[2], EOCVendorID[3],
++      //                                                                EOCVendorID[4], EOCVendorID[5], EOCVendorID[6], EOCVendorID[7]);
++      dslhal_api_setEocVendorId(pIhw, EOCVendorID);
++    }
++    
++  }
++  
++  return 0;
++}
++  
++
++
++  
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
++ * 
++ *  Function: static void tn7dsl_init(void)
++ *
++ *  Description: This function initializes
++ *               Ar7 DSL interface
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++
++int tn7dsl_init(void *priv)
++{
++  
++  printk("Initializing DSL interface\n");
++  
++  
++  /* start dsl */
++  if(dslhal_api_dslStartup(&pIhw) !=0 )
++  {
++    printk("DSL start failed.\n");
++    return -1;
++  }
++ 
++  // set dsl into overlay page reload mode
++  pIhw->bAutoRetrain = 1;
++
++  // set default training properties
++  tn7dsl_set_dsl();
++
++  pIhw->pOsContext = priv;
++
++  //start_kthread(tn7dsl_reload_overlay, &overlay_thread);
++
++  /*register dslss LED with led module */
++#ifdef CONFIG_LED_MODULE
++  tn7dsl_register_dslss_led();
++#endif
++
++  
++  return 0;  /* What do we return here? */
++}
++
++/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
++ *
++ *  Function: int avsar_exit(void)
++ *
++ *  Description: Avalanche SAR exit function
++ *
++ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
++
++void tn7dsl_exit (void)
++{
++ 
++  bshutdown = 1;
++#ifdef CONFIG_LED_MODULE
++#ifdef DEREGISTER_LED
++  //down(&adsl_sem_overlay);
++  deregister_led_drv(LED_NUM_1);
++  deregister_led_drv(LED_NUM_2);
++#else
++//  led_operation(MOD_ADSL,DEF_ADSL_IDLE);
++#endif
++#endif
++  stop_kthread(&overlay_thread);
++  dslhal_api_dslShutdown(pIhw);
++
++}
++
++
++static int tn7dsl_process_oam_string(int *type, int *pvpi, int *pvci, int *pdelay)
++{
++  int i=1;
++  int j=0;
++  int vci, vpi;
++  char tmp[16];
++  int chan;
++  int tt;
++
++  while(j<8)
++  {
++    tmp[j] = mod_req[i];
++    //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); 
++    if(tmp[j] == 0x50 || tmp[j] == 0x70)
++      break;
++    j++;
++    i++;
++  }
++
++  tmp[j] = 0;
++  vpi = os_atoi(tmp);
++
++  i++;
++  j=0;
++  while(j<8)
++  {
++    tmp[j] = mod_req[i];
++    //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); 
++    if(tmp[j] == 0x43 || tmp[j] == 0x63)
++      break;
++
++    j++;
++    i++;
++  }
++
++  vci = os_atoi(tmp);
++
++  if(vci==0) // f4 oam
++    *type = 1;
++  else
++    *type = 0;
++
++
++  tt=5000;
++  i++;
++  j=0;
++  tmp[j] = mod_req[i];
++  if(tmp[j]==0x44 || tmp[j]==0x64)
++  {
++    i++;
++    while(j<8)
++    {
++      tmp[j] = mod_req[i];
++
++      //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); 
++      if(tmp[j] == 0x54 || tmp[j] == 0x74)
++        break;
++
++      j++;
++      i++;
++    }
++    tt = os_atoi(tmp);
++  }
++
++  chan = tn7atm_lut_find(vpi, vci);
++  
++  *pvci=vci;
++  *pvpi=vpi;
++  *pdelay =tt;
++  dprintf(2, "oam chan=%d, type =%d\n", chan, *type);
++ 
++  return chan;
++}
++
++static void tn7dsl_dump_memory(void)
++{
++  unsigned int *pUi;
++  int i=1;
++  int j=0;
++  int addr, len;
++  char tmp[16];
++
++
++  while(j<8)
++  {
++    tmp[j] = mod_req[i];
++    j++;
++    i++;
++  }
++
++  tmp[j] = 0;
++          
++  addr = os_atoh(tmp);
++
++  printk("start dump address =0x%x\n", addr);
++  pUi = (unsigned int *)addr;
++  i++;
++  j=0;
++  while(j<8)
++  {
++    tmp[j] = mod_req[i];
++    //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); 
++    if(tmp[j] == 0x43 || tmp[j] == 0x63)
++      break;
++
++    j++;
++    i++;
++  }
++
++  len = os_atoi(tmp);
++  j=0;
++  for(i=0; i<len; i++)
++  {
++    if(j==0)
++      printk("0x%08x: ", (unsigned int)pUi);
++    printk("%08x ", *pUi);
++    pUi++;
++    j++;
++    if(j==4)
++    {
++      printk("\n");
++      j=0;
++    }
++  }
++     
++}
++
++
++
++static int dslmod_sysctl(ctl_table *ctl, int write, struct file * filp,
++      void *buffer, size_t *lenp)
++{
++  char *ptr;
++  int ret, len = 0;
++  int chan;
++  int type;
++  int vpi,vci,timeout;
++  
++  if (!*lenp || (filp->f_pos && !write)) {
++    *lenp = 0;
++    return 0;
++    }
++  /* DSL MODULATION is changed */
++  if(write)
++    {
++    ret = proc_dostring(ctl, write, filp, buffer, lenp);
++    
++    switch (ctl->ctl_name)
++      {
++      case DEV_DSLMOD:
++      ptr = strpbrk(info, " \t");
++      strcpy(mod_req, info);
++
++      /* parse the string to determine the action */
++      if(mod_req[0] == 0x45 || mod_req[0] == 0x65 ) // 'e', or 'E' f5 end to end 
++      {
++        chan = tn7dsl_process_oam_string(&type, &vpi, &vci, &timeout);
++        tn7sar_oam_generation(pIhw->pOsContext, chan, type, vpi, vci, timeout);
++      }
++      else if(mod_req[0] == 0x53 || mod_req[0] == 0x73 ) // 's', or 'S' f5 seg to seg
++      {
++        chan=tn7dsl_process_oam_string(&type, &vpi, &vci,&timeout);
++        type = type | (1<<1);
++        tn7sar_oam_generation(pIhw->pOsContext, chan, type, vpi, vci,timeout);
++      }
++    //debug only. Dump memory
++      else if(mod_req[0] == 0x44 || mod_req[0] == 0x64 ) // 'd' or 'D'
++        tn7dsl_dump_memory();
++      else
++        tn7dsl_chng_modulation(info);
++      break;
++      }
++    }
++  else
++    {
++    len += sprintf(info+len, mod_req);
++    ret = proc_dostring(ctl, write, filp, buffer, lenp);
++    }
++  return ret;
++}
++
++
++ctl_table dslmod_table[] = {
++  {DEV_DSLMOD, "dslmod", info, DSL_MOD_SIZE, 0644, NULL, &dslmod_sysctl},
++  {0}
++  };
++
++/* Make sure that /proc/sys/dev is there */
++ctl_table dslmod_root_table[] = {
++#ifdef CONFIG_PROC_FS
++  {CTL_DEV, "dev", NULL, 0, 0555, dslmod_table},
++#endif /* CONFIG_PROC_FS */
++  {0}
++  };
++
++static struct ctl_table_header *dslmod_sysctl_header;
++
++void tn7dsl_dslmod_sysctl_register(void)
++{
++  static int initialized;
++  
++  if (initialized == 1)
++    return;
++  
++  dslmod_sysctl_header = register_sysctl_table(dslmod_root_table, 1);
++  dslmod_root_table->child->de->owner = THIS_MODULE;
++  
++  /* set the defaults */
++  info[0] = 0;
++  
++  initialized = 1;
++}
++
++void tn7dsl_dslmod_sysctl_unregister(void)
++{
++  unregister_sysctl_table(dslmod_sysctl_header);
++}
++
++static void 
++tn7dsl_set_modulation(void* data)
++{
++  dprintf(4,"tn7dsl_set_modulation\n");
++  
++  if(!strcmp(data, "T1413"))
++  {
++    printk("retraining in T1413 mode\n");
++    dslhal_api_setTrainingMode(pIhw, T1413_MODE);
++    return;
++  }
++  if(!strcmp(data, "GDMT"))
++  {
++    dslhal_api_setTrainingMode(pIhw, GDMT_MODE);
++    return;
++  }
++  if(!strcmp(data, "GLITE"))
++  {
++    dslhal_api_setTrainingMode(pIhw, GLITE_MODE);
++    return;
++  }
++  if(!strcmp(data, "MMODE"))
++  {
++    dslhal_api_setTrainingMode(pIhw, MULTI_MODE);
++    return;
++  }
++  if(!strcmp(data, "NMODE"))
++  {
++    dslhal_api_setTrainingMode(pIhw, NO_MODE);
++    return;
++  }
++
++  return;
++}
++
++
++/* Codes added for compiling tiadiag.o for Analog Diagnostic tests */
++#ifdef ADIAG
++
++enum
++{
++  HOST_ACTREQ,         // Send R-ACKREQ and monitor for C-ACKx
++  HOST_QUIET,          // Sit quietly doing nothing for about 60 seconds, DEFAULT STATE; R_IDLE
++  HOST_XMITBITSWAP,    // Perform upstream bitswap - FOR INTERNAL USE ONLY
++  HOST_RCVBITSWAP,     // Perform downstream bitswap - FOR INTERNAL USE ONLY
++  HOST_RTDLPKT,        // Send a remote download packet - FOR INTERNAL USE ONLY
++  HOST_CHANGELED,      // Read the LED settings and change accordingly
++  HOST_IDLE,           // Sit quiet
++  HOST_REVERBTEST,     // Generate REVERB for manufacturing test
++  HOST_CAGCTEST,       // Set coarse receive gain for manufacturing test
++  HOST_DGASP,          // send Dying Gasp messages through EOC channel
++  HOST_GHSREQ,         // G.hs - FOR INTERNAL USE ONLY
++  HOST_GHSMSG,         // G.hs - FOR INTERNAL USE ONLY
++  HOST_GHS_SENDGALF,   // G.hs - FOR INTERNAL USE ONLY
++  HOST_GHSEXIT,        // G.hs - FOR INTERNAL USE ONLY
++  HOST_GHSMSG1,        // G.hs - FOR INTERNAL USE ONLY
++  HOST_HYBRID,         // Enable/Disable automatic hybrid switch
++  HOST_RJ11SELECT,     // RJ11 inner/outer pair select
++  HOST_DIGITAL_MEM,    // Digital Diags: run external memory tests
++  HOST_TXREVERB,       // AFE Diags: TX path Reverb
++  HOST_TXMEDLEY,       // AFE Diags: TX path Medley
++  HOST_RXNOISEPOWER,   // AFE Diags: RX noise power
++  HOST_ECPOWER,        // AFE Diags: RX eco power
++  HOST_ALL_ADIAG,      // AFE Diags: all major analog diagnostic modes. Host is responsible to initiate each diagnostic sessions
++  HOST_USER_ADIAG,     // AFE Diags: Host fills in analog diagnostic input data structure as specified and requests DSP to perform measurements as specified
++  HOST_QUIT_ADIAG,     // AFE Diags: Host requests DSP to quit current diagnostic session. This is used for stopping the transmit REVERB/MEDLEY
++  HOST_NO_CMD,         // All others - G.hs - FOR INTERNAL USE ONLY
++  HOST_DSLSS_SHUTDOWN, // Host initiated DSLSS shutdown message
++  HOST_SET_GENERIC,    // Set generic CO profile
++  HOST_UNDO_GENERIC    // Set profile previous to Generic
++};
++
++enum
++{
++  DSP_IDLE,               // R_IDLE state entered
++  DSP_ACTMON,             // R_ACTMON state entered
++  DSP_TRAIN,              // R_TRAIN state entered
++  DSP_ACTIVE,             // R_ACTIVE state entered
++  DSP_XMITBITSWAP,        // Upstream bitswap complete - FOR INTERNAL USE ONLY
++  DSP_RCVBITSWAP,         // Downstream bitswap complete - FOR INTERNAL USE ONLY
++  DSP_RTDL,               // R_RTDL state entered - FOR INTERNAL USE ONLY
++  DSP_RRTDLPKT,           // RTDL packet received - FOR INTERNAL USE ONLY
++  DSP_XRTDLPKT,           // RTDL packet transmitted - FOR INTERNAL USE ONLY
++  DSP_ERROR,              // Command rejected, wrong state for this command
++  DSP_REVERBTEST,         // Manufacturing REVERB test mode entered
++  DSP_CAGCTEST,           // Manufacturing receive gain test done
++  DSP_OVERLAY_START,      // Notify host that page overlay has started - overlay number indicated by "tag"
++  DSP_OVERLAY_END,        // Notify host that page overlay has ended   - overlay number indicated by "tag"
++  DSP_CRATES1,            // CRATES1 message is valid and should be copied to host memory now
++  DSP_SNR,                // SNR calculations are ready and should be copied to host memory now
++  DSP_GHSMSG,             // G.hs - FOR INTERNAL USE ONLY
++  DSP_RCVBITSWAP_TIMEOUT, // Acknowledge Message was not received within ~500 msec (26 Superframes).
++  DSP_ATM_TC_SYNC,        // Indicates true TC sync on both the upstream and downstream. Phy layer ready for data xfer.
++  DSP_ATM_NO_TC_SYNC,     // Indicates loss of sync on phy layer on either US or DS.
++  DSP_HYBRID,             // DSP completed hybrid switch
++  DSP_RJ11SELECT,         // DSP completed RJ11 inner/outer pair select
++  DSP_INVALID_CMD,        // Manufacturing (Digital and AFE) diags: CMD received not recognized
++  DSP_TEST_PASSED,        // Manufacturing diags: test passed
++  DSP_TEST_FAILED,        // Manufacturing diags: test failed
++  DSP_TXREVERB,           // Manufacturing AFE diags: Response to HOST_TXREVERB
++  DSP_TXMEDLEY,           // Manufacturing AFE diags: Response to HOST_TXMEDLEY
++  DSP_RXNOISEPOWER,       // Manufacturing AFE diags: Response to HOST_RXNOISEPOWER
++  DSP_ECPOWER,            // Manufacturing AFE diags: Response to HOST_ECPOWER
++  DSP_ALL_ADIAG,          // Manufacturing AFE diags: Response to HOST_ALL_ADIAG
++  DSP_USER_ADIAG,         // Manufacturing AFE diags: Response to HOST_USER_ADIAG
++  DSP_QUIT_ADIAG,         // Manufacturing AFE diags: Response to HOST_QUIT_ADIAG
++  DSP_DGASP               // DSP Message to indicate dying gasp
++};
++
++static unsigned char analogNoTonesTestArray[64]=
++  {
++    0,0,0,0,0,0,0,0,  // Tones 01-08
++    0,0,0,0,0,0,0,0,  // Tones 09-16
++    0,0,0,0,0,0,0,0,  // Tones 17-24
++    0,0,0,0,0,0,0,0,  // Tones 25-32
++    0,0,0,0,0,0,0,0,  // Tones 33-40
++    0,0,0,0,0,0,0,0,  // Tones 41-48
++    0,0,0,0,0,0,0,0,  // Tones 49-56
++    0,0,0,0,0,0,0,0   // Tones 57-64
++  };
++
++static unsigned char analogAllTonesTestArray[64]=
++  {
++    1,1,1,1,1,1,1,1,  // Tones 01-08
++    1,1,1,1,1,1,1,1,  // Tones 09-16
++    1,1,1,1,1,1,1,1,  // Tones 17-24
++    1,1,1,1,1,1,1,1,  // Tones 25-32
++    1,1,1,1,1,1,1,1,  // Tones 33-40
++    1,1,1,1,1,1,1,1,  // Tones 41-48
++    1,1,1,1,1,1,1,1,  // Tones 49-56
++    1,1,1,1,1,1,1,1   // Tones 57-64
++  };
++
++static unsigned char analogEvenTonesTestArray[64]=
++  {
++    0,1,0,1,0,1,0,1,  // Tones 01-08
++    0,1,0,1,0,1,0,1,  // Tones 09-16
++    0,1,0,1,0,1,0,1,  // Tones 17-24
++    0,1,0,1,0,1,0,1,  // Tones 25-32
++    0,1,0,1,0,1,0,1,  // Tones 33-40
++    0,1,0,1,0,1,0,1,  // Tones 41-48
++    0,1,0,1,0,1,0,1,  // Tones 49-56
++    0,1,0,1,0,1,0,1   // Tones 57-64
++  };
++
++static unsigned char analogOddTonesTestArray[64]=
++  {
++    1,0,1,0,1,0,1,0,  // Tones 01-08
++    1,0,1,0,1,0,1,0,  // Tones 09-16
++    1,0,1,0,1,0,1,0,  // Tones 17-24
++    1,0,1,0,1,0,1,0,  // Tones 25-32
++    1,0,1,0,1,0,1,0,  // Tones 33-40
++    1,0,1,0,1,0,1,0,  // Tones 41-48
++    1,0,1,0,1,0,1,0,  // Tones 49-56
++    1,0,1,0,1,0,1,0   // Tones 57-64
++  };
++
++unsigned int shim_osGetCpuFrequency(void)
++{
++  return 150;
++}
++
++static void tn7dsl_adiag(int Test, unsigned char *missingTones)
++{
++  int rc,cmd, tag;
++
++  rc = dslhal_diags_anlg_setMissingTones(pIhw,missingTones);
++  if(rc)
++  {
++    printk(" failed to set Missing town\n");
++    return;
++  }
++
++/*********** Start the actual test **********************/
++
++ if(Test==0)
++   {
++   printk("TX REVERB Test\n");
++   rc = dslhal_support_writeHostMailbox(pIhw, HOST_TXREVERB, 0, 0, 0);
++   if (rc)
++     {
++     printk("HOST_TXREVERB failed\n");
++     return;
++     }
++
++   }
++ if(Test==1)
++   {
++     dprintf(0,"TX MEDLEY Test\n");
++     rc = dslhal_support_writeHostMailbox(pIhw, HOST_TXMEDLEY, 0, 0, 0);
++     if (rc)
++       return;
++   }
++ dprintf(4,"dslhal_diags_anlg_testA() done\n");
++ return;
++}
++  
++
++static void tn7dsl_diagnostic_test(char *data)
++{
++  if(!strcmp(data, "ADIAGRALL"))
++  {
++    printk("TX Reverb All tone\n");
++    tn7dsl_adiag(0,analogAllTonesTestArray);
++    return;
++  }
++  if(!strcmp(data, "ADIAGRNONE"))
++  {
++    printk("TX Reverb No tone\n");
++    tn7dsl_adiag(0,analogNoTonesTestArray);
++    return;
++  }
++  if(!strcmp(data, "ADIAGREVEN"))
++  {
++    printk("TX Reverb Even tone\n");
++    tn7dsl_adiag(0,analogEvenTonesTestArray);
++    return;
++  }
++  if(!strcmp(data, "ADIAGRODD"))
++  {
++    printk("TX Reverb Odd tone\n");
++    tn7dsl_adiag(0,analogOddTonesTestArray);
++    return;
++  }
++  if(!strcmp(data, "ADIAGMALL"))
++  {
++    printk("TX Mdelay All tone\n");
++    tn7dsl_adiag(1,analogAllTonesTestArray);
++    return;
++  }
++  if(!strcmp(data, "ADIAGMNONE"))
++  {
++    printk("TX Mdelay No tone\n");
++    tn7dsl_adiag(1,analogNoTonesTestArray);
++    return;
++  }
++  if(!strcmp(data, "ADIAGMEVEN"))
++  {
++    printk("TX Mdelay Even tone\n");
++    tn7dsl_adiag(1,analogEvenTonesTestArray);
++    return;
++  }
++  if(!strcmp(data, "ADIAGMODD"))
++  {
++    printk("TX Mdelay Odd tone\n");
++    tn7dsl_adiag(1,analogOddTonesTestArray);
++    return;
++  }
++  if(!strcmp(data, "ADIAGQUIET"))
++  {
++    dslhal_api_sendIdle(pIhw);
++    return;
++  }
++  if(!strncmp(data, "ADIAGRN", 7))
++  {
++    char tones[64], tmp[4];
++    int  nth, i;
++    
++    tmp[0]=data[7];
++    tmp[1]=data[8];
++    tmp[2]=data[9];
++    
++    nth = os_atoi(tmp);
++
++    for(i=0;i<64;i++)
++    {
++      if(((i+1)% nth)==0)
++      {
++        tones[i]=0;
++      }
++      else
++      {
++        tones[i]=1;
++      }
++    }
++    printk("TX Reverb with %dth tones missing.\n", nth);
++    tn7dsl_adiag(0,tones);
++    return;
++  }
++  if(!strncmp(data, "ADIAGMN", 7))
++  {
++    char tones[64], tmp[4];
++    int  nth, i;
++
++    tmp[0]=data[7];
++    tmp[1]=data[8];
++    tmp[2]=data[9];
++    nth = os_atoi(tmp);
++
++    for(i=0;i<64;i++)
++    {
++      if(((i+1)% nth)==0)
++      {
++        tones[i]=0;
++      }
++      else
++      {
++        tones[i]=1;
++      }
++    }
++    printk("TX Mdelay with %dth tones missing.\n", nth);
++    tn7dsl_adiag(1,tones);
++    return;
++  }
++
++
++}
++
++#endif
++
++static void 
++tn7dsl_chng_modulation(void* data)
++{
++  //printk("DSL Modem Retraining\n");
++  
++  if(!strcmp(data, "T1413"))
++  {
++    printk("retraining in T1413 mode\n");
++    dslhal_api_setTrainingMode(pIhw, T1413_MODE);
++    dslhal_api_sendQuiet(pIhw);
++    return;
++  }
++  if(!strcmp(data, "GDMT"))
++  {
++    dslhal_api_setTrainingMode(pIhw, GDMT_MODE);
++    dslhal_api_sendQuiet(pIhw);
++    return;
++  }
++  if(!strcmp(data, "GLITE"))
++  {
++    dslhal_api_setTrainingMode(pIhw, GLITE_MODE);
++    dslhal_api_sendQuiet(pIhw);
++    return;
++  }
++  if(!strcmp(data, "MMODE"))
++  {
++    dslhal_api_setTrainingMode(pIhw, MULTI_MODE);
++    dslhal_api_sendQuiet(pIhw);
++    return;
++  }
++  if(!strcmp(data, "NMODE"))
++  {
++    dslhal_api_setTrainingMode(pIhw, NO_MODE);
++    dslhal_api_sendQuiet(pIhw);
++    return;
++  }
++
++#ifdef ADIAG
++  tn7dsl_diagnostic_test(data);
++#endif
++
++
++  return;
++}
++
++#ifdef CONFIG_LED_MODULE
++static void tn7dsl_led_on(unsigned long parm)
++{
++  dslhal_api_configureLed(pIhw,parm, 0);
++}
++
++
++static void tn7dsl_led_off(unsigned long parm)
++{
++  dslhal_api_configureLed(pIhw,parm, 1);
++}
++
++static void tn7dsl_led_init(unsigned long parm)
++{
++  dslhal_api_configureLed(pIhw,parm, 2);
++}
++#endif
++
++static void tn7dsl_register_dslss_led(void)
++{
++#ifdef CONFIG_LED_MODULE
++    
++    // register led0 with led module
++    ledreg[0].param = 0;
++    ledreg[0].init = (void *)tn7dsl_led_init;
++    ledreg[0].onfunc = (void *)tn7dsl_led_on;
++    ledreg[0].offfunc = (void *)tn7dsl_led_off;
++    register_led_drv(LED_NUM_1, &ledreg[0]);
++
++    // register led1 output with led module
++    ledreg[1].param = 1;
++    ledreg[1].init = (void *)tn7dsl_led_init;
++    ledreg[1].onfunc = (void *)tn7dsl_led_on;
++    ledreg[1].offfunc = (void *)tn7dsl_led_off;
++    register_led_drv(LED_NUM_2, &ledreg[1]);
++#endif  
++}
++
++static int tn7dsl_reload_overlay(void)
++{
++  int overlayFlag;
++  spinlock_t overlayLock;
++
++  init_kthread(&overlay_thread, "adsl");
++  down(&adsl_sem_overlay);
++  while(1)
++  {
++    mdelay(500);
++    if(pIhw->lConnected == 0)
++    {
++      spin_lock_irqsave(&overlayLock, overlayFlag);
++      dslhal_support_restoreTrainingInfo(pIhw);
++      spin_unlock_irqrestore(&overlayLock, overlayFlag);
++    }
++    down(&adsl_sem_overlay);
++  }
++  return 0;
++}
++
++
++
++
+diff -urN linux.old/drivers/atm/sangam_atm/tn7sar.c linux.dev/drivers/atm/sangam_atm/tn7sar.c
+--- linux.old/drivers/atm/sangam_atm/tn7sar.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/tn7sar.c	2005-08-23 04:46:50.110841720 +0200
+@@ -0,0 +1,1376 @@
++/******************************************************************************
++ * FILE PURPOSE:    OS files for CPSAR
++ ******************************************************************************
++ * FILE NAME:       tn7sar.c
++ *
++ * DESCRIPTION:     This file contains source for required os files for CPSAR
++ * 
++ * (C) Copyright 2002, Texas Instruments Inc
++ *
++ *
++ * Revision History:
++ * 0/11/02         Zhicheng Tang, created.
++ *
++ *******************************************************************************/
++
++#include <linux/config.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/atmdev.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/smp_lock.h>
++#include <asm/io.h>
++#include <asm/mips-boards/prom.h>
++#include <linux/proc_fs.h>
++#include <linux/string.h>
++#include <linux/ctype.h>
++
++
++#define _CPHAL_AAL5
++#define _CPHAL_SAR
++#define _CPHAL_HAL
++typedef void OS_PRIVATE;
++typedef void OS_DEVICE;
++typedef void OS_SENDINFO;
++typedef void OS_RECEIVEINFO;
++typedef void OS_SETUP;
++
++#include "cpswhal_cpsar.h"
++#include "tn7atm.h"
++#include "tn7api.h"
++
++
++/* PDSP Firmware files */
++#include "tnetd7300_sar_firm.h"
++
++
++enum
++{
++  PACKET_TYPE_AAL5,
++  PACKET_TYPE_NULL,
++  PACKET_TYPE_OAM,
++  PACKET_TYPE_TRANS,
++  PACKET_TYPE_AAL2
++}PACKET_TYPE;
++
++enum
++{
++  OAM_PING_FAILED,
++  OAM_PING_SUCCESS,
++  OAM_PING_PENDING,
++  OAM_PING_NOT_STARTED
++}OAM_PING;
++
++/* PDSP OAM General Purpose Registers (@todo: These need to be used in the HAL!) */
++
++#define SAR_PDSP_HOST_OAM_CONFIG_REG_ADDR 0xa3000020
++#define SAR_PDSP_OAM_CORR_REG_ADDR        0xa3000024
++#define SAR_PDSP_OAM_LB_RESULT_REG_ADDR   0xa3000028
++#define SAR_PDSP_OAM_F5LB_COUNT_REG_ADDR  0xa300002c
++#define SAR_PDSP_OAM_F4LB_COUNT_REG_ADDR  0xa3000030
++
++#define SAR_FREQUNCY 50000000
++
++#define AAL5_PARM "id=aal5, base = 0x03000000, offset = 0, int_line=15, ch0=[RxBufSize=1522; RxNumBuffers = 32; RxServiceMax = 50; TxServiceMax=50; TxNumBuffers=32; CpcsUU=0x5aa5; TxVc_CellRate=0x3000; TxVc_AtmHeader=0x00000640]"
++#define SAR_PARM "id=sar,base = 0x03000000, reset_bit = 9, offset = 0; UniNni = 0, PdspEnable = 1"
++#define RESET_PARM "id=ResetControl, base=0xA8611600"
++#define CH0_PARM "RxBufSize=1522, RxNumBuffers = 32, RxServiceMax = 50, TxServiceMax=50, TxNumBuffers=32, CpcsUU=0x5aa5, TxVc_CellRate=0x3000, TxVc_AtmHeader=0x00000640"
++
++#define MAX_PVC_TABLE_ENTRY 16
++
++sar_stat_t sarStat;
++ 
++typedef struct _channel_parm
++{
++  unsigned int     RxBufSize;
++  unsigned int     RxNumBuffers;
++  unsigned int     RxServiceMax;
++  unsigned int     TxServiceMax;
++  unsigned int     TxNumBuffers;
++  unsigned int     CpcsUU;
++  unsigned int     TxVc_CellRate;
++  unsigned int     TxVc_AtmHeader;
++}channel_parm_t;
++
++typedef struct _aal5_parm
++{
++  unsigned int        base;
++  unsigned int        offset;
++  unsigned int        int_line;
++  channel_parm_t      chan[8];
++}aal5_parm_t;
++
++
++typedef struct _sar_parm
++{
++  unsigned int        base;
++  unsigned int        reset_bit;
++  unsigned int        offset;
++  unsigned int        UniNni;
++}sar_parm_t;
++
++typedef struct _pvc_table
++{
++  int bInUse;
++  int vpi;
++  int vci;
++}pvc_table;
++
++static aal5_parm_t aal5Parm;
++static sar_parm_t  sarParm;
++static char *pAal5, *pSar, *pReset;
++static int oam_type;
++static unsigned int oamPingStatus;
++static int oamAtmHdr;
++static int oamLbTimeout;
++static char parm_data[1024];
++static char aal5Data[1024];
++static char sarData[1024];
++static char resetData[256];
++static pvc_table pvc_result[MAX_PVC_TABLE_ENTRY];
++
++/* external function */
++extern int __guDbgLevel;
++
++/* gloabal function */
++unsigned int oamFarLBCount[4];
++/* end of gloabal function */
++
++/* internal APIs */
++static int tn7sar_atm_header(int vpi, int vci);
++static void tn7sar_record_pvc(int atmheader);
++
++/*end of internal APIs */
++spinlock_t sar_lock;
++
++/* HAL OS support functions */
++
++
++unsigned long tn7sar_strtoul(const char *str, char **endptr, int base)
++{
++  unsigned long ret;
++
++  ret= simple_strtoul(str, endptr, base); 
++  return ret;
++}
++
++static void *tn7sar_malloc(unsigned int size)
++{
++  return(kmalloc(size, GFP_KERNEL));
++}
++
++static unsigned long lockflags;
++static void tn7sar_critical_on(void)
++{
++  spin_lock_irqsave(&sar_lock,lockflags);
++}
++
++static void tn7sar_critical_off(void)
++{
++  spin_unlock_irqrestore(&sar_lock,lockflags);
++}
++
++static void tn7sar_data_invalidate(void *pmem, int size)
++{
++  unsigned int i,Size=(((unsigned int)pmem)&0xf)+size;
++
++  for (i=0;i<Size;i+=16,pmem+=16)
++  {
++    __asm__(" .set mips3 ");
++    __asm__("cache  17, (%0)" : : "r" (pmem));
++    __asm__(" .set mips0 ");
++  }
++
++}
++
++static void tn7sar_data_writeback(void *pmem, int size)
++{
++  unsigned int i,Size=(((unsigned int)pmem)&0xf)+size;
++
++  for (i=0;i<Size;i+=16,pmem+=16)
++  {
++    __asm__(" .set mips3 ");
++    __asm__(" cache  25, (%0)" : : "r" (pmem));
++    __asm__(" .set mips0 ");
++  }
++}
++
++
++static int 
++tn7sar_find_device(int unit, const char *find_name, void *device_info)
++{
++  int ret_val = 0;
++  char **ptr;
++
++  ptr = (char **)device_info;
++  dprintf(3,"tn7sar_find_device\n");
++  if(strcmp(find_name, "aal5")==0)
++  {
++    //dprintf(4,"pAal5=%s\n", pAal5);
++    *ptr = pAal5;
++  }
++  else if(strcmp(find_name, "sar")==0)
++  {
++    dprintf(3, "pSar=%s\n", pSar);
++    *ptr = pSar;
++  }  
++  else if(strcmp(find_name, "reset")==0)
++  {
++    dprintf(3, "pReset=%s\n", pReset);
++    *ptr = pReset;
++  }
++
++  device_info = NULL;
++
++  return(ret_val);
++}
++
++static int 
++tn7sar_get_device_parm_uint(void *dev_info, const char *param, unsigned int *value)
++{
++  char *dev_str;
++  char *pMatch;
++  int i=0, j=0;
++  char val_str[64];
++  unsigned int val;
++  int base = 10;
++
++  dprintf(6, "tn7sar_get_device_parm_uint()\n");
++
++  dev_str = (char *)dev_info;
++  dprintf(3, "parm=%s\n", param);
++  pMatch = strstr(dev_str, param);
++  //dprintf(4, "pMatch=%s\n", pMatch);
++  if(pMatch)
++  {
++    //get "=" position
++    while(pMatch[i] != 0x3d)
++    {
++      i++;
++    }
++    i++;
++    // get rid of spaces
++    while(pMatch[i]==0x20)
++    {
++      i++;
++    }
++    //get rid of 0x
++    if(pMatch[i]==0x30)
++    {
++      if(pMatch[i+1] == 0x58 || pMatch[i+1] == 0x78)
++      {
++        i+=2;
++        base = 16;
++      }
++    }
++
++    // get next delineator
++    while(pMatch[i] != 0x2c && pMatch[i] != 0x0)
++    {
++      val_str[j]=pMatch[i];
++      j++;
++      i++;
++    }
++    val_str[j]=0;
++    //dprintf(4, "val_str=\n%s\n", val_str);
++    //xdump(val_str, strlen(val_str) + 1, 4);
++    val = simple_strtoul(val_str, (char **)NULL, base);
++    dprintf(4, "val =%d\n", val);
++    *value = val;
++    return 0;
++  }
++
++
++  dprintf(3, "match not found.\n");
++  if(strcmp(dev_str, "debug")==0)
++  {
++    dprintf(6,"debug..\n");
++    *value = 6;
++    return 0;
++  }
++  return (1);
++}
++
++static int tn7sar_get_device_parm_value(void *dev_info, const char *param, void *value)
++{
++  char *dev_str;
++  char *pMatch;
++  int i=0, j=0;
++  char *pVal;
++
++  
++  dprintf(3, "tn7sar_get_device_parm_value().\n");
++  
++  pVal = (char *) parm_data;
++  dev_str = (char *)dev_info;
++  dprintf(3, "dev_info: \n%s\n", dev_str);
++  dprintf(3, "param=%s\n", param);
++  if(strcmp(param, "Ch0")==0)
++  {
++    *(char **)value = CH0_PARM;
++    dprintf(3, "value =%s\n", *(char **)value);
++    return 0;
++  }
++
++  pMatch = strstr(dev_str, param);
++  if(pMatch)
++  {
++    //get "=" position
++    while(pMatch[i] != 0x3d)
++    {
++      i++;
++    }
++    i++;
++    // get rid of spaces
++    while(pMatch[i]==0x20)
++    {
++      i++;
++    }
++
++    if(pMatch[i] != 0x5b) //"["
++    {
++      // get next delineator
++      while(pMatch[i] != 0x2c && pMatch[i] != 0x0)
++      {
++        pVal[j] = pMatch[i];
++        j++;
++        i++;
++      }
++      pVal[j]=0;
++
++      *(char **)value = pVal;
++      return 0;
++    }
++    else
++    {
++      i++; //skip "["
++      while(pMatch[i] != 0x5d)
++      {
++        if(pMatch[i] == 0x3b) //";"
++          pVal[j] = 0x2c;
++        else
++          pVal[j] = pMatch[i];
++        j++;
++        i++;
++      }
++      pVal[j] = 0;
++      *(char **)value = pVal;
++      return 0;
++    }
++ 
++  }
++  
++  return (1);
++}
++
++static void tn7sar_free(void *pmem)
++{
++    kfree(pmem);
++}
++
++static void 
++tn7sar_free_buffer(OS_RECEIVEINFO *os_receive_info, void *pmem)
++{
++  tn7atm_free_rx_skb(os_receive_info);
++}
++
++static void tn7sar_free_dev(void *pmem)
++{
++  kfree(pmem);
++}
++
++static void tn7sar_free_dma_xfer(void *pmem)
++{
++  kfree(pmem);
++}
++
++
++static int
++tn7sar_control(void *dev_info, const char *key, const char *action, void *value)
++{
++        int ret_val = -1;
++
++  if (strcmp(key, "Firmware") == 0)
++  {
++    if (strcmp(action, "Get") == 0)
++    {
++      *(int **)value = &SarPdspFirmware[0];
++    }
++    ret_val=0;
++  }
++        
++  if (strcmp(key, "FirmwareSize") == 0)
++  {
++    if (strcmp(action, "Get") == 0)
++    {       
++      *(int *)value = sizeof(SarPdspFirmware);
++    }
++    ret_val=0;
++  }
++  
++  if (strcmp(key, "OamLbResult") == 0)
++  {
++    dprintf(2, "get looback source call back\n");
++    if (strcmp(action, "Set") == 0)
++    {       
++      dprintf(2, "oam result = %d\n", *(unsigned int *)value);
++      oamFarLBCount[oam_type] = oamFarLBCount[oam_type] + *(unsigned int *)value;
++      if(oamPingStatus == OAM_PING_PENDING)
++      {
++        oamPingStatus = *(unsigned int *)value;
++        if(oamPingStatus == OAM_PING_SUCCESS)
++        {
++          /* record pvc */
++          tn7sar_record_pvc(oamAtmHdr);
++        }
++      }
++      
++    }
++    ret_val=0;
++  }
++  
++  if (strcmp(key, "SarFreq") == 0)
++  {
++    if (strcmp(action, "Get") == 0)
++    {       
++      *(int *)value = SAR_FREQUNCY;
++    }
++    ret_val=0;
++  }
++  return(ret_val);
++}
++
++
++static void
++tn7sar_sarhal_isr_register(OS_DEVICE *os_dev, int(*hal_isr)(HAL_DEVICE *, int *), int interrupt_num)
++{
++  tn7atm_sarhal_isr_register(os_dev, hal_isr, interrupt_num);
++}
++
++static void 
++tn7sar_isr_unregister(OS_DEVICE *os_dev, int interrupt_num)
++{
++    /* TODO */
++}
++
++
++static void *
++tn7sar_malloc_rxbuffer(unsigned int size, void *mem_base, unsigned int mem_range, HAL_DEVICE *hal_dev, 
++                       HAL_RECEIVEINFO *hal_info, OS_RECEIVEINFO **os_receive_info, OS_DEVICE *os_dev)
++{
++   return tn7atm_allocate_rx_skb(os_dev, os_receive_info, size);
++}
++
++static void *
++tn7sar_malloc_dev(unsigned int size)
++{
++  return(kmalloc(size, GFP_KERNEL));
++}
++
++static void *
++tn7sar_malloc_dma_xfer(unsigned int size, void *mem_base, unsigned int mem_range)
++{
++  dprintf(4, "tn7sar_malloc_dma_xfer, size =%d\n", size);
++
++  return (kmalloc(size, GFP_DMA |GFP_KERNEL));
++  
++}
++
++static void * 
++tn7sar_memset(void *dst, int set_char, size_t count)
++{
++    return (memset(dst, set_char, count));
++}
++
++static int tn7sar_printf(const char *format, ...)
++{
++  /* TODO: add debug levels */
++  static char buff[256];
++  va_list  ap; 
++
++  va_start( ap, format); 
++  vsprintf((char *)buff, format, ap); 
++  va_end(ap); 
++
++  printk("SAR HAL: %s\n", buff);
++  return(0);
++}
++
++static void tn7sar_record_pvc(int atmheader)
++{
++  int vci,vpi;
++  int i;
++
++  vci = 0xffff & (atmheader >> 4);
++  vpi = 0xff & (atmheader >> 20);
++  for(i=0;i<MAX_PVC_TABLE_ENTRY;i++)
++  {
++    if(pvc_result[i].bInUse)
++    {
++      if(pvc_result[i].vpi == vpi && pvc_result[i].vci == vci)
++      {
++        return;
++      }
++    }
++  }
++  for(i=0;i<MAX_PVC_TABLE_ENTRY;i++)
++  {
++    if(pvc_result[i].bInUse == 0)
++    {
++      pvc_result[i].bInUse = 1;
++      pvc_result[i].vpi = vpi;
++      pvc_result[i].vci = vci;
++      return;
++    }
++  }
++  return;
++}
++
++static void tn7sar_clear_pvc_table(void)
++{
++  int i;
++ 
++  for(i=0;i<MAX_PVC_TABLE_ENTRY; i++)
++  {
++    pvc_result[i].bInUse = 0;
++    pvc_result[i].vpi = 0;
++    pvc_result[i].vci = 0;
++  }
++}
++
++int tn7sar_process_unmatched_oam(FRAGLIST *frag_list, unsigned int frag_count, unsigned int packet_size, unsigned int mode)
++{
++
++  FRAGLIST *local_list;
++  int i;
++  unsigned int atmHdr;
++
++  local_list = frag_list;
++
++  for(i=0;i<(int)frag_count;i++)
++  {
++    tn7sar_data_invalidate(local_list->data, (int)local_list->len);
++    local_list ++;
++  }
++  local_list = frag_list;
++  if((mode>>31)) /*vci, vpi is attached */
++  {
++    atmHdr = *(unsigned int *)frag_list->data;
++    tn7sar_record_pvc(atmHdr);
++    if(atmHdr & 0x8) //oam cell
++    {
++      atmHdr &= 0xfffffff0;
++      if(atmHdr == oamAtmHdr)
++      {
++        if(oamPingStatus == OAM_PING_PENDING)
++        {
++          oamPingStatus = OAM_PING_SUCCESS;
++          oamFarLBCount[oam_type] = oamFarLBCount[oam_type] + 1;
++        }
++        return 0;
++      }
++    }
++  }
++ 
++  return 0;
++}
++
++
++static int 
++tn7sar_receive(OS_DEVICE *os_dev,FRAGLIST *frag_list, unsigned int frag_count, unsigned int packet_size, 
++                 HAL_RECEIVEINFO *hal_receive_info, unsigned int mode)
++{   
++  int ch;
++  struct atm_dev *dev;
++  Tn7AtmPrivate *priv;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  int bRet;
++
++
++  dprintf(4, "tn7sar_receive\n");
++
++  dev = (struct atm_dev *)os_dev;
++  priv= (Tn7AtmPrivate *)dev->dev_data;
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  
++  /* Mode contains channel info */
++  ch = (mode & 0xFF);
++ 
++  if(ch == 15)
++  {
++    tn7sar_process_unmatched_oam(frag_list, frag_count, packet_size, mode);
++    pHalFunc->RxReturn(hal_receive_info, 0);
++    return 0;
++  }
++
++  if(frag_count > 1 || frag_list->len == 0)
++  {
++    printk("Packet fragment count > 1, not handdle.\n");
++    return 1;
++  }
++ 
++  tn7sar_data_invalidate(frag_list->data, (int)frag_list->len);
++  bRet=tn7atm_receive(os_dev, ch, packet_size, frag_list->OsInfo, frag_list->data);
++
++  if(bRet==0)
++  {
++    sarStat.rxPktCnt++;
++    sarStat.rxBytes += packet_size;
++    pHalFunc->RxReturn(hal_receive_info, 1);
++  }
++  else
++  {
++    pHalFunc->RxReturn(hal_receive_info, 0);
++  }
++
++  return bRet;
++}
++
++static int 
++tn7sar_send_complete(OS_SENDINFO *osSendInfo)
++{  
++  return (tn7atm_send_complete(osSendInfo));
++}
++
++void
++tn7sar_teardown_complete(OS_DEVICE *OsDev, int ch, int Dir)
++{
++  return;
++}
++  
++
++/*
++unsigned int tn7sar_virt(unsigned int address)
++{
++  return phys_to_virt(address);
++}
++*/
++
++int tn7sar_init_module(OS_FUNCTIONS *os_funcs)
++{
++  dprintf(4, "tn7sar_init_module\n");
++  if( os_funcs == 0 )
++  {
++    return(-1);   
++  }
++  os_funcs->Control                  = tn7sar_control;
++  os_funcs->CriticalOn               = tn7sar_critical_on;
++  os_funcs->CriticalOff              = tn7sar_critical_off;
++  os_funcs->DataCacheHitInvalidate   = tn7sar_data_invalidate;
++  os_funcs->DataCacheHitWriteback    = tn7sar_data_writeback;
++  os_funcs->DeviceFindInfo           = tn7sar_find_device;
++  os_funcs->DeviceFindParmUint       = tn7sar_get_device_parm_uint;
++  os_funcs->DeviceFindParmValue      = tn7sar_get_device_parm_value;
++  os_funcs->Free                     = tn7sar_free;
++  os_funcs->FreeRxBuffer             = tn7sar_free_buffer;
++  os_funcs->FreeDev                  = tn7sar_free_dev;
++  os_funcs->FreeDmaXfer              = tn7sar_free_dma_xfer;
++  os_funcs->IsrRegister              = tn7sar_sarhal_isr_register;
++  os_funcs->IsrUnRegister            = tn7sar_isr_unregister;
++  os_funcs->Malloc                   = tn7sar_malloc;
++  os_funcs->MallocRxBuffer           = tn7sar_malloc_rxbuffer;
++  os_funcs->MallocDev                = tn7sar_malloc_dev;
++  os_funcs->MallocDmaXfer            = tn7sar_malloc_dma_xfer;
++  os_funcs->Memset                   = tn7sar_memset;
++  os_funcs->Printf                   = tn7sar_printf;
++  os_funcs->Receive                  = tn7sar_receive;
++  os_funcs->SendComplete             = tn7sar_send_complete;
++  os_funcs->Strcmpi                  = strcmp;
++  os_funcs->Sprintf                  = sprintf;
++  os_funcs->Strlen                   = strlen;
++  os_funcs->Strstr                   = strstr;
++  os_funcs->Strtoul                  = tn7sar_strtoul;
++  os_funcs->TeardownComplete         = tn7sar_teardown_complete;
++    
++  return(0);
++}
++
++
++static void tn7sar_init_dev_parm(void)
++{
++  int i;
++  
++  
++  /* aal5 */
++  //strcpy(aal5Parm.id, "aal5");
++  aal5Parm.base = 0x03000000;
++  aal5Parm.offset = 0;
++  aal5Parm.int_line=15;
++  aal5Parm.chan[0].RxBufSize=1600;
++  aal5Parm.chan[0].RxNumBuffers = 32;
++  aal5Parm.chan[0].RxServiceMax = 50;
++  aal5Parm.chan[0].TxServiceMax=50;
++  aal5Parm.chan[0].TxNumBuffers=32;
++  aal5Parm.chan[0].CpcsUU=0x5aa5;
++  aal5Parm.chan[0].TxVc_CellRate=0x3000;
++  aal5Parm.chan[0].TxVc_AtmHeader=0x00000640;
++  for(i=1;i<8;i++)
++  {
++    memcpy(&aal5Parm.chan[i], &aal5Parm.chan[0], sizeof(aal5Parm.chan[0]));
++  }
++  
++
++  /* sar */
++  //strcpy(sarParm.id, "sar");
++  sarParm.base = 0x03000000;
++  sarParm.reset_bit = 9;
++  sarParm.offset = 0;
++  sarParm.UniNni = 0;
++
++  pAal5 = aal5Data;
++  pSar  = sarData;
++  pReset = resetData;
++  strcpy(pAal5, AAL5_PARM);
++  strcpy(pSar, SAR_PARM);
++  strcpy(pReset, RESET_PARM);
++
++}
++
++ 
++int tn7sar_get_stats(void *priv1)
++{
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  Tn7AtmPrivate *priv;
++  int i, j;
++  unsigned int *pSarStat, *pStateBase;
++  char statString[64];
++  int len;
++  
++  dprintf(2, "tn7sar_get_stats\n");
++
++  priv = (Tn7AtmPrivate *)priv1;
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  //memset(&sarStat, 0, sizeof(sarStat));
++  sarStat.txErrors = 0;
++  sarStat.rxErrors = 0;
++  for(i=0;i<MAX_DMA_CHAN;i++)
++  {
++    if(priv->lut[i].inuse)
++    {
++      for(j=0;j<1;j++)
++      {
++        len=sprintf(statString, "Stats;0;%d", priv->lut[i].chanid);
++        statString[len]=0;
++        dprintf(2, "statString=%s\n",statString);
++        pHalFunc->Control(pHalDev, statString, "Get", &pSarStat);
++        pStateBase = pSarStat;
++        while(pSarStat)
++        {
++          if((char *)*pSarStat == NULL)
++            break;
++          dprintf(2, "%s\n", (char *) *pSarStat);
++          pSarStat++;
++          dprintf(2, "%s\n", (char *) *pSarStat);
++          sarStat.rxErrors += os_atoul((char *) *pSarStat);
++          pSarStat++;
++        }
++          
++        kfree(pStateBase);
++      }
++    }
++  }
++  return 0;
++}
++          
++int tn7sar_setup_oam_channel(Tn7AtmPrivate *priv)
++{
++
++  CHANNEL_INFO chInfo;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  int chan=15;  
++  dprintf(4, "tn7sar_setup_oam_channel\n");
++
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  memset(&chInfo, 0xff, sizeof(chInfo));
++
++  /* channel specific */
++  chInfo.Channel = 15; /* hardcoded for last channel */
++  chInfo.Direction = 0;
++  chInfo.Vci = 30; /* just need below 32 */
++  chInfo.Vpi = 0;
++  chInfo.TxVc_QosType = 2;
++
++  /*default */
++  chInfo.PktType      = PACKET_TYPE_TRANS;
++  chInfo.TxServiceMax = 2;
++  chInfo.RxServiceMax = 2;
++  chInfo.TxNumQueues  = 1;
++  chInfo.TxNumBuffers = 4;
++  chInfo.RxNumBuffers = 4;
++  chInfo.RxBufSize    = 256;
++  chInfo.RxVc_OamToHost = 0;
++  chInfo.RxVp_OamToHost = 0;
++  chInfo.FwdUnkVc       = 1; //enable forwarding of unknown vc
++  chInfo.TxVc_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, chInfo.Vci);
++  chInfo.RxVc_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, chInfo.Vci);
++  chInfo.TxVp_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, 0);
++  chInfo.RxVp_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, 0);
++
++  dprintf(4, "TxVc_AtmHeader=0x%x\n", chInfo.TxVc_AtmHeader);
++
++  if(pHalFunc->ChannelSetup(pHalDev, &chInfo, NULL))
++  {
++    printk("failed to setup channel =%d.\n", chan);
++    return -1;
++  }
++ 
++  // claiming the channel
++  priv->lut[chan].vpi = 0;
++  priv->lut[chan].vci = 30;
++  priv->lut[chan].chanid = chan;
++  priv->lut[chan].inuse = 1;   
++  return 0;
++}
++
++int tn7sar_init(struct atm_dev *dev, Tn7AtmPrivate *priv)
++{
++  int retCode;
++  int hal_funcs_size;
++ 
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  OS_FUNCTIONS  *pOsFunc;
++  int oamMod;
++  char *pLbTimeout;
++  int lbTimeout;
++
++
++  dprintf(4, "tn7sar_init\n");
++
++  pOsFunc = (OS_FUNCTIONS  *)kmalloc(sizeof(OS_FUNCTIONS), GFP_KERNEL);
++
++  
++  priv->pSarOsFunc = ( void *)pOsFunc;
++
++  /* init boot parms */
++  tn7sar_init_dev_parm();
++
++  /* init sar os call back functions */
++  retCode = tn7sar_init_module(pOsFunc);
++  if (retCode != 0) /* error */
++  {
++    printk("Failed to init SAR OS Functions\n");
++    return (1);
++  }
++                
++        /* Init sar hal */
++  retCode = cpaal5InitModule(&pHalDev, (OS_DEVICE*) dev, &pHalFunc, 
++                               pOsFunc, sizeof(OS_FUNCTIONS), &hal_funcs_size, 0);
++  if (retCode != 0) /* error */
++  {
++    printk("Failed to init SAR HAL\n");
++    return (1);
++  }
++
++  /* sanity check */
++  if (pHalDev == NULL || pHalFunc == NULL || hal_funcs_size != sizeof(HAL_FUNCTIONS) )
++  {
++    printk("Invalid SAR hal and/or functions.\n");
++    return (1);
++  }
++   
++  /* remeber HAL pointers */
++  priv->pSarHalDev = (void *)pHalDev;
++  priv->pSarHalFunc = (void *)pHalFunc;
++
++        /* Probe for the Device to get hardware info from driver */
++  retCode = pHalFunc->Probe(pHalDev);
++  if (retCode !=0)
++  {
++    printk("SAR hal probing error.\n");
++    return (1);
++  }
++
++  /* init sar hal */
++  retCode = pHalFunc->Init(pHalDev);
++  if (retCode != 0) /* error */
++  {
++    
++    printk("pHalFunc->Init failed. err code =%d\n", retCode);
++    return (1);
++  }
++
++  /* open hal module */
++  retCode = pHalFunc->Open(pHalDev);
++  if (retCode != 0) /* error */
++  {
++     printk("pHalFunc->open failed, err code: %d\n",retCode ); 
++     return (1);
++  }
++
++  /* init sar for firmware oam */
++  oamMod= 1;
++  pHalFunc->Control(pHalDev,"OamMode", "Set", &oamMod);
++
++  /* read in oam lb timeout value */
++  pLbTimeout = prom_getenv("oam_lb_timeout");
++  if(pLbTimeout)
++  {
++    lbTimeout =tn7sar_strtoul(pLbTimeout, NULL, 10);
++    oamLbTimeout = lbTimeout;
++    pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &lbTimeout);
++  }
++  else
++  {
++    oamLbTimeout = 5000;
++  }
++
++  oamFarLBCount[0]=0;
++  oamFarLBCount[1]=0;
++  oamFarLBCount[2]=0;
++  oamFarLBCount[3]=0;
++
++  memset(&sarStat, 0 , sizeof(sarStat));
++
++  /* setup channel 15 for oam operation */
++  tn7sar_setup_oam_channel(priv);
++  dprintf(4, "tn7sar_init done");
++  return 0;
++}
++
++static int
++tn7sar_atm_header(int vpi, int vci)
++{
++  union
++  {
++    unsigned char byte[4];
++    unsigned int  dword;
++  }atm_h;
++  int itmp = 0;
++
++  //vci 
++  itmp = vci &0xf;
++  atm_h.byte[0] = 0;
++  atm_h.byte[0] |= (itmp << 4);
++  atm_h.byte[1] = ((vci & 0xff0) >> 4);
++  atm_h.byte[2] = 0;
++  atm_h.byte[2] |= ((vci & 0xf000) >>12);;
++  atm_h.byte[2] |= ((vpi & 0xf) << 4);
++  atm_h.byte[3] = 0;
++  atm_h.byte[3] = ((vpi & 0xff0) >> 4);
++  return atm_h.dword;
++}
++
++int tn7sar_activate_vc(Tn7AtmPrivate *priv, short vpi, int vci, int pcr, int scr, int mbs, int cdvt, int chan, int qos)
++{
++  CHANNEL_INFO chInfo;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  
++  dprintf(4, "tn7sar_activate_vc\n");
++
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  memset(&chInfo, 0xff, sizeof(chInfo));
++
++  /* channel specific */
++  chInfo.Channel = chan;
++  chInfo.Direction = 0;
++  chInfo.Vci = vci;
++  chInfo.Vpi = vpi;
++  chInfo.TxVc_QosType = qos;
++  chInfo.Priority = qos;
++  
++  if(chInfo.TxVc_QosType == 1) /* if the connection is VBR than set the DaMask value to tell the schedular to accumalte the credit */
++  {
++    chInfo.DaMask = 1;
++  }  
++  chInfo.TxVc_Mbs = mbs; /* use pcr as MBS */
++  pcr = SAR_FREQUNCY/pcr;
++  scr = SAR_FREQUNCY/scr;
++  chInfo.TxVc_CellRate = scr;
++  chInfo.TxVc_Pcr = pcr;
++
++  /*default */
++  chInfo.PktType      = PACKET_TYPE_AAL5;
++  chInfo.TxServiceMax = TX_SERVICE_MAX;
++  chInfo.RxServiceMax = RX_SERVICE_MAX;
++  chInfo.TxNumQueues  = TX_QUEUE_NUM;
++  chInfo.TxNumBuffers = TX_BUFFER_NUM;
++  chInfo.RxNumBuffers = RX_BUFFER_NUM;
++  chInfo.RxBufSize    = RX_BUFFER_SIZE;
++  chInfo.RxVc_OamToHost = 0;
++  chInfo.RxVp_OamToHost = 0;
++  chInfo.TxVc_AtmHeader = tn7sar_atm_header((int)vpi, vci);
++  chInfo.RxVc_AtmHeader = tn7sar_atm_header((int)vpi, vci);
++  chInfo.TxVp_AtmHeader = tn7sar_atm_header((int)vpi, 0);
++  chInfo.RxVp_AtmHeader = tn7sar_atm_header((int)vpi, 0);
++  chInfo.CpcsUU = 0;
++
++  dprintf(4, "TxVc_AtmHeader=0x%x\n", chInfo.TxVc_AtmHeader);
++
++  if(pHalFunc->ChannelSetup(pHalDev, &chInfo, NULL))
++  {
++    printk("failed to setup channel =%d.\n", chan);
++    return -1;
++  }
++ 
++
++  return 0;
++}
++
++int tn7sar_send_packet(Tn7AtmPrivate *priv, int chan, void *new_skb, void *data,unsigned int len, int priority)
++{
++  FRAGLIST fragList;
++  unsigned int mode;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++
++  dprintf(4, "tn7sar_send_packet\n");
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  fragList.len = len;
++  fragList.data = (void *)data;
++
++  xdump((char *)fragList.data , fragList.len, 6);
++
++  /*mode bit 
++  31-19 unused
++  18    oam cell, 1 = true, 0=false
++  17-16 oam type, 0=F4 seg, 1=F4 End, 2=F5 seg, 3=F5 end
++  15-08 transimit queue, current, 0=priority queue, 1=normal queue
++  07-00 channel number
++  */
++  mode = 0;
++  mode |= (0xff & chan);
++  mode |= ((0xff & priority) << 8);
++  
++  dprintf(4, "mode = %d\n", mode);
++
++  tn7sar_data_writeback(fragList.data, len);
++  if(pHalFunc->Send(pHalDev, &fragList, 1, len, new_skb, mode) != 0)
++  {
++    dprintf(1, "SAR hal failed to send packet.\n");
++    return 1;
++  }
++  //tn7sar_get_stats(priv);
++  sarStat.txPktCnt++;
++  sarStat.txBytes +=len;
++  return 0;
++}
++
++
++
++int tn7sar_handle_interrupt(struct atm_dev *dev, Tn7AtmPrivate *priv)
++{
++  int more;
++  int rc;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  int (*halIsr)(HAL_DEVICE *halDev, int *work);
++
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++  halIsr = priv->halIsr;
++
++  rc = halIsr(pHalDev, &more);
++  
++  pHalFunc->PacketProcessEnd(pHalDev);
++
++  return rc;
++}
++
++
++int tn7sar_deactivate_vc(Tn7AtmPrivate *priv, int chan)
++{
++  unsigned int mode;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++
++  dprintf(4, "tn7sar_deactivate_vc\n");
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  mode = 0xf; //tear down everything, wait for return;
++
++  pHalFunc->ChannelTeardown(pHalDev, chan, mode);
++  return 0;
++}
++
++void tn7sar_exit(struct atm_dev *dev, Tn7AtmPrivate *priv)
++{
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++
++  dprintf(4, "tn7sar_exit()\n");
++
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++  
++  tn7sar_deactivate_vc(priv, 15); // de-activate oam channel
++
++  pHalFunc->Close(pHalDev, 2);
++  pHalFunc->Shutdown(pHalDev);
++
++  kfree(priv->pSarOsFunc);
++  
++}
++
++void tn7sar_get_sar_version(Tn7AtmPrivate *priv, char **pVer)
++{
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++
++  dprintf(4, "tn7sar_get_sar_version()\n");
++
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++  pHalFunc->Control(pHalDev, "Version", "Get", pVer);
++}
++
++
++int tn7sar_get_near_end_loopback_count(unsigned int *pF4count, unsigned int *pF5count)
++{
++  unsigned int f4c, f5c;
++
++  f4c = *(volatile unsigned int *)SAR_PDSP_OAM_F4LB_COUNT_REG_ADDR;
++  f5c = *(volatile unsigned int *)SAR_PDSP_OAM_F5LB_COUNT_REG_ADDR;
++  *pF4count = f4c;
++  *pF5count = f5c;
++
++  return 0;
++}
++
++
++int tn7sar_unmatched_oam_generation(void *privContext, int vpi, int vci, int type)
++{
++
++  unsigned int regv = 0;
++  int chan=15;
++  static unsigned int tag;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  Tn7AtmPrivate *priv;
++  unsigned int llid[4]={0xffffffff,0xffffffff,0xffffffff,0xffffffff};
++
++  dprintf(4, "tn7sar_unknow_oam_generation()\n");
++ 
++  priv = (Tn7AtmPrivate *)privContext;
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  if(vci==0)
++  {
++    oamPingStatus = OAM_PING_FAILED;
++    return 0;
++  }
++  /* calculate atm header */
++  oamAtmHdr = tn7sar_atm_header(vpi,vci);
++
++  /* config the atm header */
++  pHalFunc->Control(pHalDev,"TxVc_AtmHeader.15", "Set", &oamAtmHdr);
++
++  /*record oam type */
++  oam_type = type;
++
++  regv = (0xff & chan);
++  
++  switch(type)
++  {
++    case 0:
++      regv |= (1<<12); //f5 end 
++      dprintf(2, "f5 loop back\n");
++      break;
++    case 1:
++      regv |= (1<<13); // f4 end
++      break;
++    case 2:
++      regv |= (1<<14); //f5 seg
++      break;
++    case 3:
++      regv |= (1<<15); //f4 seg
++      break;
++    default:
++      break;
++  }
++  oamPingStatus = OAM_PING_PENDING;
++  pHalFunc->OamLoopbackConfig(pHalDev, regv, llid, tag);
++  tag++;
++  return 0;
++
++}
++
++int tn7sar_oam_generation(void *privContext, int chan, int type, int vpi, int vci, int timeout)
++{
++  unsigned int regv = 0;
++  static unsigned int tag;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  Tn7AtmPrivate *priv;
++  unsigned int llid[4]={0xffffffff,0xffffffff,0xffffffff,0xffffffff};
++
++  dprintf(2, "tn7sar_oam_generation()\n");
++
++  priv = (Tn7AtmPrivate *)privContext;
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  if(timeout >= 5000)
++  {
++    if(timeout == 6000)
++    {
++      tn7sar_clear_pvc_table();
++      return 0;
++    }
++    timeout = oamLbTimeout;
++  }
++
++
++  pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &timeout);
++
++  if(chan == ATM_NO_DMA_CHAN)
++  {
++    tn7sar_unmatched_oam_generation(priv, vpi, vci, type);
++    return 0;
++  }
++
++  /* calculate atm header */
++  oamAtmHdr = tn7sar_atm_header(vpi,vci);
++  
++  oam_type = type;
++
++  regv = (0xff & chan);
++  switch(type)
++  {
++    case 0:
++      regv |= (1<<12); //f5 end 
++      dprintf(2, "f5 loop back\n");
++      break;
++    case 1:
++      regv |= (1<<13); // f4 end
++      break;
++    case 2:
++      regv |= (1<<14); //f5 seg
++      break;
++    case 3:
++      regv |= (1<<15); //f4 seg
++      break;
++    default:
++      break;
++  }
++  oamPingStatus = OAM_PING_PENDING;
++  pHalFunc->OamLoopbackConfig(pHalDev, regv, llid, tag);
++  tag++;
++
++  return 0;
++}
++
++int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data)
++{
++  int len = 0;
++
++  len += sprintf(buf+len, "%d\n", oamPingStatus);
++
++  return len;
++}
++
++int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data)
++{
++  int len = 0;
++  int i;
++ 
++  for(i=0;i<16;i++)
++  {
++    if(pvc_result[i].bInUse)
++    {
++      len += sprintf(buf+len, "%d,%d\n", pvc_result[i].vpi,pvc_result[i].vci);
++    }
++    else
++    {
++      len += sprintf(buf+len, "0,0\n");
++    }
++  }
++  return len;
++}
++
++ 
++
++int tn7sar_proc_sar_stat(char* buf, char **start, off_t offset, int count,int *eof, void *data)
++{
++  int len = 0;
++  int limit = count - 80;
++  struct atm_dev *dev;
++  Tn7AtmPrivate *priv;
++  int i, j, k;
++  int stat_len;
++  char statString[32];
++  unsigned int *pStateBase, *pSarStat;
++  HAL_FUNCTIONS *pHalFunc;
++  HAL_DEVICE    *pHalDev;
++  int dBytes;
++
++  dev = (struct atm_dev *)data;
++  priv = (Tn7AtmPrivate *)dev->dev_data;
++
++  pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
++  pHalDev  = (HAL_DEVICE *)priv->pSarHalDev;
++
++  len += sprintf(buf+len, "SAR HAL Statistics\n");
++  for(i=0;i<MAX_DMA_CHAN;i++)
++  {
++    if(priv->lut[i].inuse)
++    {
++      if(len<=limit)
++      len += sprintf(buf+len, "\nChannel %d:\n",priv->lut[i].chanid);
++      k=0;
++      for(j=0;j<4;j++)
++      {
++        stat_len =sprintf(statString, "Stats;%d;%d", j,priv->lut[i].chanid);
++        statString[stat_len]=0;
++        pHalFunc->Control(pHalDev, statString, "Get", &pSarStat);
++        pStateBase = pSarStat;
++        while(pSarStat)
++        {          
++          if((char *)*pSarStat == NULL)
++            break;
++          if(len<=limit)
++          {
++            dBytes = sprintf(buf+len, "%s: ",(char *) *pSarStat);
++            len += dBytes;
++            k += dBytes;
++          }
++          pSarStat++;
++          if(len<=limit)
++          {
++            dBytes = sprintf(buf+len, "%s;  ",(char *) *pSarStat);
++            len += dBytes;
++            k += dBytes;
++          }
++          pSarStat++;
++          
++          if(k > 60)
++          {
++            k=0;
++            if(len<=limit)
++            len += sprintf(buf+len, "\n");
++          }
++        }
++          
++        kfree(pStateBase);
++      }
++    }
++  }
++ 
++  return len;
++}
++
++void tn7sar_get_sar_firmware_version(unsigned int *pdsp_version_ms, unsigned int *pdsp_version_ls)
++{
++
++  *pdsp_version_ms = (SarPdspFirmware[9]>>20) & 0xF;
++  *pdsp_version_ls = (SarPdspFirmware[9]>>12) & 0xFF;
++  return;
++}
+diff -urN linux.old/drivers/atm/sangam_atm/tnetd7300_sar_firm.h linux.dev/drivers/atm/sangam_atm/tnetd7300_sar_firm.h
+--- linux.old/drivers/atm/sangam_atm/tnetd7300_sar_firm.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/tnetd7300_sar_firm.h	2005-08-23 04:46:50.111841568 +0200
+@@ -0,0 +1,988 @@
++//SarPdspFirmware Revision:  49
++
++static int SarPdspFirmware[] = {
++                             0xb0a8d1f1,
++                             0x000003d8,
++                             0x00000000,
++                             0x00000004,
++                             0x00000000,
++                             0x00000000,
++                             0x00000000,
++                             0x00000000,
++                             0x21000900,
++                             0x24049080,
++                             0x24000080,
++                             0x240000c0,
++                             0x10e0e0e1,
++                             0x10e0e0e2,
++                             0x10e0e0e3,
++                             0x10e0e0e4,
++                             0x10e0e0e5,
++                             0x10e0e0e6,
++                             0x10e0e0e7,
++                             0x10e0e0e8,
++                             0x10e0e0e9,
++                             0x10e0e0ea,
++                             0x10e0e0eb,
++                             0x10e0e0ec,
++                             0x10e0e0ed,
++                             0x10e0e0ee,
++                             0x10e0e0ef,
++                             0x10e0e0f0,
++                             0x10e0e0f1,
++                             0x10e0e0f2,
++                             0x10e0e0f3,
++                             0x10e0e0f4,
++                             0x10e0e0f5,
++                             0x10e0e0f6,
++                             0x10e0e0f7,
++                             0x10e0e0f8,
++                             0x10e0e0f9,
++                             0x10e0e0fa,
++                             0x10e0e0fb,
++                             0x10e0e0fc,
++                             0x10e0e0fd,
++                             0x10e0e0fe,
++                             0x10e0e0ff,
++                             0x81042680,
++                             0x810c2680,
++                             0x81042680,
++                             0x2483c080,
++                             0x81180b80,
++                             0x2484c080,
++                             0x811a0b80,
++                             0x2485c080,
++                             0x811c0b80,
++                             0x240100dd,
++                             0xa07d06fd,
++                             0x240400dd,
++                             0xa07d04fd,
++                             0x24c000dd,
++                             0x2400169d,
++                             0xa07d5cfd,
++                             0x511f9d03,
++                             0x01019d9d,
++                             0x7f0000fd,
++                             0xd11eff05,
++                             0x97c06890,
++                             0x1d00e5e5,
++                             0x2301229e,
++                             0x81bc2890,
++                             0x24000000,
++                             0xc917ff02,
++                             0x81000100,
++                             0x01010000,
++                             0xc918ff02,
++                             0x81000100,
++                             0x01010000,
++                             0xc919ff02,
++                             0x81000100,
++                             0xd110e70a,
++                             0xd11cff09,
++                             0x1d00e5e5,
++                             0xd100e704,
++                             0xd114ff06,
++                             0x2301179e,
++                             0x79000004,
++                             0xd70ffffd,
++                             0x91382486,
++                             0x2301059e,
++                             0xc903ff07,
++                             0xa06047e0,
++                             0xb10043e6,
++                             0xc910e602,
++                             0x81000106,
++                             0x24006025,
++                             0x2300d39e,
++                             0xd11dff09,
++                             0x1f00e5e5,
++                             0xc901e705,
++                             0xd111ff06,
++                             0x91382586,
++                             0x2301059e,
++                             0x79000003,
++                             0xd715fffc,
++                             0x2301179e,
++                             0xc910e706,
++                             0x110f2760,
++                             0x240000c6,
++                             0x24000086,
++                             0x13106006,
++                             0x7b00005a,
++                             0x11079f80,
++                             0x51008010,
++                             0xc912ff0f,
++                             0xd100ff04,
++                             0xd101ff05,
++                             0xa06046e0,
++                             0x79000004,
++                             0xa06044e0,
++                             0x79000002,
++                             0xa06045e0,
++                             0xb10043e6,
++                             0x61150602,
++                             0x2101c500,
++                             0xc910e602,
++                             0xa1001006,
++                             0x24000025,
++                             0x2300d39e,
++                             0xd11fff05,
++                             0x97c06a90,
++                             0x1f00e5e5,
++                             0x2301229e,
++                             0x81bc2a90,
++                             0xd11cff09,
++                             0x1d00e5e5,
++                             0xc900e705,
++                             0xd10fff06,
++                             0x91382486,
++                             0x2301059e,
++                             0x79000003,
++                             0xd714fffc,
++                             0x2301179e,
++                             0xc907ff07,
++                             0xa0604be0,
++                             0xb10043e6,
++                             0xc910e602,
++                             0x81000106,
++                             0x24006025,
++                             0x2300d39e,
++                             0xd111e70a,
++                             0xd11dff09,
++                             0x1f00e5e5,
++                             0xd101e704,
++                             0xd115ff06,
++                             0x2301179e,
++                             0x79000004,
++                             0xd711fffd,
++                             0x91382586,
++                             0x2301059e,
++                             0xc911e706,
++                             0x0b042760,
++                             0x240000c6,
++                             0x24000086,
++                             0x13106006,
++                             0x7b000024,
++                             0x11709f80,
++                             0x5100800e,
++                             0xc913ff0d,
++                             0xd104ff04,
++                             0xd105ff05,
++                             0xa0604ae0,
++                             0x79000004,
++                             0xa06048e0,
++                             0x79000002,
++                             0xa06049e0,
++                             0xb10043e6,
++                             0xc910e602,
++                             0xa1001106,
++                             0x24000025,
++                             0x2300d39e,
++                             0xc90bff02,
++                             0x7900000b,
++                             0xc90aff02,
++                             0x79000012,
++                             0xcf08ff89,
++                             0xb10002e0,
++                             0xcf18e087,
++                             0x790000b6,
++                             0x24000080,
++                             0x24fb00c0,
++                             0xa06003e0,
++                             0x7f000082,
++                             0xb10024e6,
++                             0xb10025e0,
++                             0xa06628e6,
++                             0xa06029e0,
++                             0x248000c6,
++                             0xa06624e6,
++                             0x671006f0,
++                             0x81082186,
++                             0x7f0000ee,
++                             0xb10027e6,
++                             0x61100604,
++                             0xa0662be6,
++                             0x810c2186,
++                             0x79000006,
++                             0xd70cffea,
++                             0xa0662be6,
++                             0x1f1be6e6,
++                             0x81382686,
++                             0x813c2680,
++                             0x248000c6,
++                             0xa06627e6,
++                             0x7f0000e3,
++                             0x110f0600,
++                             0x81100b00,
++                             0x01502545,
++                             0x90457888,
++                             0x5103091c,
++                             0x6901092a,
++                             0xc910e603,
++                             0xd108e90d,
++                             0x79000027,
++                             0x01582545,
++                             0x9045788a,
++                             0xd108e904,
++                             0x1f08e9e9,
++                             0x01552545,
++                             0x80451829,
++                             0x50eaeb20,
++                             0x0101ebeb,
++                             0x015c2545,
++                             0x8045388b,
++                             0x7900001c,
++                             0x015c2545,
++                             0x9045788b,
++                             0x6900eb05,
++                             0x1d08e9e9,
++                             0x01552545,
++                             0x80451829,
++                             0x79000004,
++                             0x0501ebeb,
++                             0x015c2545,
++                             0x8045388b,
++                             0x10ecece8,
++                             0x79000010,
++                             0x24000000,
++                             0x5110000e,
++                             0x690f6903,
++                             0x24000069,
++                             0x79000002,
++                             0x01016969,
++                             0x01010000,
++                             0x81100b69,
++                             0x01542545,
++                             0x90451809,
++                             0x6f0209f7,
++                             0xa1001069,
++                             0x81100b06,
++                             0x01572545,
++                             0x80451869,
++                             0xa06841e8,
++                             0xa1414006,
++                             0x209e0000,
++                             0x81100b06,
++                             0xd11fe603,
++                             0x9164388d,
++                             0x8108248d,
++                             0xd100e507,
++                             0x97406490,
++                             0x9108248d,
++                             0x813c2480,
++                             0x2302b4de,
++                             0x1d00e7e7,
++                             0x79000006,
++                             0x97406590,
++                             0x9108258d,
++                             0x813c2580,
++                             0x1d01e7e7,
++                             0x2302b9de,
++                             0x8164388d,
++                             0x209e0000,
++                             0x81040105,
++                             0x91002286,
++                             0x97086290,
++                             0x81042280,
++                             0xd100e504,
++                             0x2302b4de,
++                             0x1f00e7e7,
++                             0x209e0000,
++                             0x2302b9de,
++                             0x1f01e7e7,
++                             0x209e0000,
++                             0xd109ff00,
++                             0xa0702cf0,
++                             0x79000001,
++                             0xd109ff00,
++                             0xb1002de6,
++                             0xd11ee609,
++                             0xb1000de0,
++                             0xc91fe044,
++                             0x24c338c6,
++                             0x10000006,
++                             0x81382686,
++                             0x87406690,
++                             0x813c2680,
++                             0x7900003e,
++                             0x110f0600,
++                             0x81100b00,
++                             0x24000045,
++                             0x24000025,
++                             0x61100603,
++                             0x24006045,
++                             0x24006025,
++                             0x01704545,
++                             0x90451888,
++                             0x0b034600,
++                             0x11070000,
++                             0x69040004,
++                             0xc916ff2c,
++                             0x01019e9e,
++                             0x7900002f,
++                             0xc90cff04,
++                             0x6f0200fd,
++                             0xd308e8a1,
++                             0x7f0000fb,
++                             0x69020008,
++                             0xd308e89e,
++                             0xb1002fe6,
++                             0x91b82880,
++                             0xc91ce002,
++                             0x1f1ce6e6,
++                             0x10080806,
++                             0x79000015,
++                             0xb1002fe6,
++                             0x69030003,
++                             0x13c06666,
++                             0x79000011,
++                             0x91807809,
++                             0xc910ea09,
++                             0x81082689,
++                             0x01018a8a,
++                             0xc91ee60a,
++                             0x1d10eaea,
++                             0x240557c0,
++                             0x60c08a07,
++                             0x1f1de6e6,
++                             0x79000005,
++                             0x2400018a,
++                             0x1f10eaea,
++                             0x1f1fe6e6,
++                             0xd71ee6f8,
++                             0x51000002,
++                             0x11c76666,
++                             0x81382686,
++                             0x87406690,
++                             0x91082689,
++                             0x813c2680,
++                             0xb1002ee6,
++                             0xd103e609,
++                             0x81807809,
++                             0xc908e807,
++                             0x21039400,
++                             0x81002386,
++                             0x87086390,
++                             0x81042380,
++                             0xc908e802,
++                             0x21039400,
++                             0x209e0000,
++                             0xb10008ef,
++                             0x110f0f00,
++                             0x81100b00,
++                             0x24000025,
++                             0x61100f02,
++                             0x24005025,
++                             0x01952545,
++                             0x9045382e,
++                             0xc91def03,
++                             0x24000900,
++                             0x2301c09e,
++                             0xc91cef03,
++                             0x24001900,
++                             0x2301c09e,
++                             0xc91bef03,
++                             0x24000a00,
++                             0x2301c09e,
++                             0xc91aef03,
++                             0x24001a00,
++                             0x2301c09e,
++                             0x8045382e,
++                             0x01a82545,
++                             0x9045388e,
++                             0xc915ef03,
++                             0x24000000,
++                             0x2301c09e,
++                             0xc914ef03,
++                             0x24001000,
++                             0x2301c09e,
++                             0x8045388e,
++                             0x61100f02,
++                             0x24006025,
++                             0x016d2545,
++                             0x9045382e,
++                             0xc919ef03,
++                             0x24000900,
++                             0x2301c09e,
++                             0xc918ef03,
++                             0x24001900,
++                             0x2301c09e,
++                             0xc917ef03,
++                             0x24000a00,
++                             0x2301c09e,
++                             0xc916ef03,
++                             0x24001a00,
++                             0x2301c09e,
++                             0x8045382e,
++                             0x017c2545,
++                             0x9045388e,
++                             0xc913ef03,
++                             0x24000000,
++                             0x2301c09e,
++                             0xc912ef03,
++                             0x24001000,
++                             0x2301c09e,
++                             0x8045388e,
++                             0xd11eef19,
++                             0x11f02f00,
++                             0x51000017,
++                             0x24001520,
++                             0x81140b20,
++                             0x81b01a0f,
++                             0x1f02e7e7,
++                             0x24c000c0,
++                             0x24001580,
++                             0xa0605ce0,
++                             0xc90fef04,
++                             0x1d04e7e7,
++                             0x1d05e7e7,
++                             0x7900000c,
++                             0xc90eef04,
++                             0x1d04e7e7,
++                             0x1f05e7e7,
++                             0x79000008,
++                             0xc90def04,
++                             0x1f04e7e7,
++                             0x1d05e7e7,
++                             0x79000004,
++                             0xc90cef03,
++                             0x1f04e7e7,
++                             0x1f05e7e7,
++                             0x2100b900,
++                             0xd11eef03,
++                             0x1e00eeee,
++                             0x209e0000,
++                             0x1c00eeee,
++                             0x209e0000,
++                             0x110f0606,
++                             0x81140b06,
++                             0x13100606,
++                             0x91b01a83,
++                             0x24000025,
++                             0x61100304,
++                             0x24005025,
++                             0xc905e702,
++                             0x24006025,
++                             0x110f0300,
++                             0x81100b00,
++                             0x81120b00,
++                             0x51150611,
++                             0x61100302,
++                             0x24005025,
++                             0x1d01e5e5,
++                             0x51160639,
++                             0x511a0650,
++                             0x511c0657,
++                             0x5118065e,
++                             0x511e0685,
++                             0x61100302,
++                             0x24006025,
++                             0x1f01e5e5,
++                             0x51170634,
++                             0x511b064b,
++                             0x511d0652,
++                             0x51190658,
++                             0x511f067f,
++                             0xc903e708,
++                             0x1d03e7e7,
++                             0x24000060,
++                             0xa1000a60,
++                             0x244000c0,
++                             0x24001580,
++                             0xa0605ce0,
++                             0x21007d00,
++                             0xcf02e7fc,
++                             0x1d02e7e7,
++                             0x1f03e7e7,
++                             0xc904e703,
++                             0x1f08e3e3,
++                             0x79000002,
++                             0x1d08e3e3,
++                             0xc905e705,
++                             0x01682545,
++                             0x9045588d,
++                             0x2302879e,
++                             0x79000004,
++                             0x01902545,
++                             0x9045588d,
++                             0x2302819e,
++                             0x24001872,
++                             0x24000152,
++                             0xb10009e0,
++                             0x108080d3,
++                             0x10c0c092,
++                             0x2400102c,
++                             0x2302c8de,
++                             0x91021c97,
++                             0x91001cd8,
++                             0x91061c98,
++                             0x91041cd9,
++                             0x910a1c99,
++                             0x91081cda,
++                             0x910e1c9a,
++                             0x910c1cdb,
++                             0x91261d9b,
++                             0x91287d9c,
++                             0x23028dde,
++                             0x1f02e7e7,
++                             0x1d03e7e7,
++                             0x7d000070,
++                             0x01902545,
++                             0x9045798d,
++                             0x79000003,
++                             0x01682545,
++                             0x9045788d,
++                             0x0b09eee0,
++                             0x24001472,
++                             0xd108e303,
++                             0xc900e00b,
++                             0x79000002,
++                             0xc910e009,
++                             0xd101e503,
++                             0x2302819e,
++                             0x79000002,
++                             0x2302879e,
++                             0x91013d12,
++                             0x9504bd93,
++                             0x23028dde,
++                             0x7d00005d,
++                             0xd108ee03,
++                             0x1d10e7e7,
++                             0x7900009a,
++                             0x1d11e7e7,
++                             0x79000098,
++                             0x01902545,
++                             0x9045798d,
++                             0x79000003,
++                             0x01682545,
++                             0x9045788d,
++                             0x0b0aeee0,
++                             0x24001072,
++                             0x7f0000e8,
++                             0x01a02545,
++                             0x9045b98d,
++                             0x79000003,
++                             0x01742545,
++                             0x9045b88d,
++                             0x0b01efe0,
++                             0x24001172,
++                             0x7f0000e0,
++                             0x2302d1de,
++                             0x79000002,
++                             0x2302d6de,
++                             0x000c2545,
++                             0x9045198f,
++                             0xd100ef07,
++                             0x1d02efef,
++                             0xc901ef0c,
++                             0xc905ef0b,
++                             0x1d01efef,
++                             0x1d05efef,
++                             0x79000008,
++                             0xd102ef04,
++                             0x1f02efef,
++                             0x8045198f,
++                             0x79000078,
++                             0xd101ef04,
++                             0x1f01efef,
++                             0x1f05efef,
++                             0x8045198f,
++                             0x69180673,
++                             0x01ac2545,
++                             0x2302dbde,
++                             0xd100ef03,
++                             0x23036c9e,
++                             0x7900006e,
++                             0xc800e40b,
++                             0x110f0020,
++                             0x81100b20,
++                             0x100c0c45,
++                             0x61100002,
++                             0x01604545,
++                             0x9045188f,
++                             0xd101ef04,
++                             0x1f01efef,
++                             0x1f07efef,
++                             0x8045188f,
++                             0x01010000,
++                             0x6f1300f4,
++                             0x79000060,
++                             0x2302d1de,
++                             0x79000002,
++                             0x2302d6de,
++                             0x000c2545,
++                             0x9045198f,
++                             0xc903ef05,
++                             0x1d03efef,
++                             0x1f04efef,
++                             0x8045198f,
++                             0x79000056,
++                             0xc904ef55,
++                             0x1d04efef,
++                             0xc901ef04,
++                             0xc906ef03,
++                             0x1d01efef,
++                             0x1d06efef,
++                             0x8045198f,
++                             0x691e064e,
++                             0x01ac2545,
++                             0x2302dbde,
++                             0xc800e40c,
++                             0x110f0020,
++                             0x81100b20,
++                             0x100c0c45,
++                             0x61100002,
++                             0x01604545,
++                             0x9045188f,
++                             0xc901ef05,
++                             0xc908ef04,
++                             0x1d01efef,
++                             0x1d07efef,
++                             0x8045188f,
++                             0x01010000,
++                             0x6f1300f3,
++                             0x7900003d,
++                             0x10ededf0,
++                             0xc908e303,
++                             0x13401010,
++                             0x209e0000,
++                             0x13301010,
++                             0x209e0000,
++                             0x10ededf0,
++                             0xc908e303,
++                             0x130a1010,
++                             0x209e0000,
++                             0x13081010,
++                             0x209e0000,
++                             0x24000266,
++                             0x2400c800,
++                             0x24000020,
++                             0xd108ee17,
++                             0x01012020,
++                             0xc91cff09,
++                             0x6e0020fe,
++                             0xc910e702,
++                             0x20de0000,
++                             0x1f10e7e7,
++                             0x110f0600,
++                             0x11f02727,
++                             0x12002727,
++                             0x20de0000,
++                             0x1d10e7e7,
++                             0x2302b4de,
++                             0x511d0605,
++                             0x511c0602,
++                             0x7900001e,
++                             0x01a62545,
++                             0x79000002,
++                             0x01722545,
++                             0x90451880,
++                             0x01018080,
++                             0x80451880,
++                             0x79000017,
++                             0x01012020,
++                             0xc91dff09,
++                             0x6e0020fe,
++                             0xc911e702,
++                             0x20de0000,
++                             0x1f11e7e7,
++                             0x09040600,
++                             0x110f2727,
++                             0x12002727,
++                             0x20de0000,
++                             0x1d11e7e7,
++                             0x2302b9de,
++                             0x7f0000ea,
++                             0x81b82786,
++                             0x240000d1,
++                             0x87c06790,
++                             0x81bc2780,
++                             0x20de0000,
++                             0x81b82986,
++                             0x87c06990,
++                             0x81bc2980,
++                             0x20de0000,
++                             0x91b43a88,
++                             0x2301029e,
++                             0x51150608,
++                             0xc908e305,
++                             0x51120303,
++                             0x01010303,
++                             0x79000002,
++                             0x24000003,
++                             0x01012323,
++                             0x81b01a83,
++                             0x21007d00,
++                             0x902cfc88,
++                             0x10c8c893,
++                             0x108888d4,
++                             0x10c9c994,
++                             0x108989d5,
++                             0x10caca95,
++                             0x108a8ad6,
++                             0x10cbcb96,
++                             0x108b8bd7,
++                             0xd108e303,
++                             0x2400a80c,
++                             0x20de0000,
++                             0x2400aa0c,
++                             0x20de0000,
++                             0xd108e303,
++                             0x24007c0c,
++                             0x20de0000,
++                             0x24007e0c,
++                             0x20de0000,
++                             0x24000000,
++                             0x90453904,
++                             0xd108e303,
++                             0x24007c0c,
++                             0x20de0000,
++                             0x24007e0c,
++                             0x20de0000,
++                             0xb1002fe6,
++                             0x91b82880,
++                             0xc91ce002,
++                             0x209e0000,
++                             0xb1002ee6,
++                             0x69187279,
++                             0xd110f230,
++                             0xc903e769,
++                             0xc90be604,
++                             0xc904e767,
++                             0xd105e766,
++                             0x7900000c,
++                             0xc90ae604,
++                             0xd104e763,
++                             0xd105e762,
++                             0x79000008,
++                             0xc907e604,
++                             0xc904e75f,
++                             0xc905e75e,
++                             0x79000004,
++                             0xc906e65c,
++                             0xd104e75b,
++                             0xc905e75a,
++                             0x91003c80,
++                             0x6897c058,
++                             0x68d88057,
++                             0x91043c80,
++                             0x6898c055,
++                             0x68d98054,
++                             0x91083c80,
++                             0x6899c052,
++                             0x68da8051,
++                             0x910c3c80,
++                             0x689ac04f,
++                             0x68db804e,
++                             0xb10009e0,
++                             0x6892c04c,
++                             0x68d3804b,
++                             0x24000160,
++                             0xa1000a60,
++                             0x244000c0,
++                             0x24001580,
++                             0xa0605ce0,
++                             0x1d03e7e7,
++                             0x109393c8,
++                             0x10d4d488,
++                             0x109494c9,
++                             0x10d5d589,
++                             0x109595ca,
++                             0x10d6d68a,
++                             0x109696cb,
++                             0x10d7d78b,
++                             0x8110fc88,
++                             0x209e0000,
++                             0x91003c80,
++                             0x6893c00c,
++                             0x68d4800b,
++                             0x91043c80,
++                             0x6894c009,
++                             0x68d58008,
++                             0x91083c80,
++                             0x6895c006,
++                             0x68d68005,
++                             0x910c3c80,
++                             0x6896c003,
++                             0x68d78002,
++                             0x79000010,
++                             0x24ffff80,
++                             0x24ffffc0,
++                             0x68809306,
++                             0x68e0f405,
++                             0x68e0f504,
++                             0x68e0f603,
++                             0x6880d702,
++                             0x79000008,
++                             0x24000080,
++                             0x240000c0,
++                             0x68809323,
++                             0x68e0f422,
++                             0x68e0f521,
++                             0x68e0f620,
++                             0x6880d71f,
++                             0x1d10f2f2,
++                             0x2400002c,
++                             0x2302c8de,
++                             0x24000f80,
++                             0x240000c0,
++                             0x0101c0c0,
++                             0xd100e504,
++                             0xc91cff06,
++                             0x6e80c0fd,
++                             0x21016d00,
++                             0xc91dff03,
++                             0x6e80c0fa,
++                             0x21016d00,
++                             0xd104e606,
++                             0xc909e608,
++                             0xb1000ce0,
++                             0x0101e0e0,
++                             0xa0600ce0,
++                             0x79000004,
++                             0xb1000be0,
++                             0x0101e0e0,
++                             0xa0600be0,
++                             0xb1002fe6,
++                             0xd100e504,
++                             0x2302b4de,
++                             0x24000022,
++                             0x209e0000,
++                             0x2302b9de,
++                             0x24000042,
++                             0x209e0000,
++                             0xd104e609,
++                             0x01782545,
++                             0x9045180e,
++                             0x110f0e00,
++                             0x81100b00,
++                             0x2400a445,
++                             0x51002502,
++                             0x01504545,
++                             0x90451888,
++                             0xc909e87d,
++                             0xb1002fe6,
++                             0x1f1fe6e6,
++                             0x10080806,
++                             0x21015f00,
++                             0x6914721b,
++                             0x01782545,
++                             0x2303bade,
++                             0x900c188f,
++                             0x1d02efef,
++                             0xc901ef05,
++                             0xc905ef04,
++                             0x1d01efef,
++                             0x1d05efef,
++                             0x800c188f,
++                             0xc909e66e,
++                             0x2303d0de,
++                             0xc800e40c,
++                             0x110f0020,
++                             0x81100b20,
++                             0x100c0c45,
++                             0x61100002,
++                             0x01604545,
++                             0x9045188f,
++                             0xc901ef05,
++                             0xc907ef04,
++                             0x1d01efef,
++                             0x1d07efef,
++                             0x8045188f,
++                             0x01010000,
++                             0x6f1300f3,
++                             0x7900005e,
++                             0x6910725d,
++                             0x01782545,
++                             0x2303bade,
++                             0x900c188f,
++                             0x1f03efef,
++                             0xd101ef03,
++                             0x1f01efef,
++                             0x1f06efef,
++                             0x800c188f,
++                             0xc909e654,
++                             0x2303d0de,
++                             0xc800e40b,
++                             0x110f0020,
++                             0x81100b20,
++                             0x100c0c45,
++                             0x61100002,
++                             0x01604545,
++                             0x9045188f,
++                             0xd101ef04,
++                             0x1f01efef,
++                             0x1f08efef,
++                             0x8045188f,
++                             0x01010000,
++                             0x6f1300f4,
++                             0x79000045,
++                             0x01782545,
++                             0x9045788e,
++                             0x1d02efef,
++                             0x1d12efef,
++                             0xc905ef04,
++                             0x1d05efef,
++                             0x1d01efef,
++                             0x7900000c,
++                             0xc915ef04,
++                             0x1d15efef,
++                             0x1d11efef,
++                             0x79000008,
++                             0xc907ef04,
++                             0x1d07efef,
++                             0x1d01efef,
++                             0x79000004,
++                             0xc917ef03,
++                             0x1d17efef,
++                             0x1d11efef,
++                             0x017c2545,
++                             0x8045388f,
++                             0x110f0e00,
++                             0x81100b00,
++                             0x2400a845,
++                             0x51002502,
++                             0x01504545,
++                             0x9045388f,
++                             0x1d02efef,
++                             0x1d12efef,
++                             0xc905ef04,
++                             0x1d05efef,
++                             0x1d01efef,
++                             0x79000004,
++                             0xc915ef03,
++                             0x1d15efef,
++                             0x1d11efef,
++                             0x8045388f,
++                             0x7900001f,
++                             0xc909e60d,
++                             0x9045180e,
++                             0x110f0e00,
++                             0x81100b00,
++                             0xc90ae603,
++                             0x2400a80c,
++                             0x79000003,
++                             0xc90be617,
++                             0x2400aa0c,
++                             0x51002503,
++                             0x01500c0c,
++                             0x24005025,
++                             0x20de0000,
++                             0xc904e611,
++                             0xc906e603,
++                             0x24007c0c,
++                             0x79000003,
++                             0xc907e60d,
++                             0x24007e0c,
++                             0x51002502,
++                             0x01600c0c,
++                             0x20de0000,
++                             0x01ac2545,
++                             0x24000000,
++                             0x90453804,
++                             0xd10be603,
++                             0x24007c0c,
++                             0x20de0000,
++                             0x24007e0c,
++                             0x20de0000,
++                             0x209e0000};
+diff -urN linux.old/drivers/atm/sangam_atm/turbodsl.c linux.dev/drivers/atm/sangam_atm/turbodsl.c
+--- linux.old/drivers/atm/sangam_atm/turbodsl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/atm/sangam_atm/turbodsl.c	2005-08-23 04:46:50.111841568 +0200
+@@ -0,0 +1,223 @@
++
++
++/*
++ *
++ *  Turbo DSL Implementaion
++ *
++ *  Zhicheng Tang   ztang@ti.com
++ *
++ *  2002 (c) Texas Instruments Inc.
++ *
++*/
++
++/* defines and variables */
++#define RFC2684_BRIDGED_HDR_SIZE 10
++unsigned char LLC_BRIDGED_HEADER_2684[RFC2684_BRIDGED_HDR_SIZE] =
++  {0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00};
++
++#define RFC2684_ROUTED_HDR_SIZE 6
++unsigned char LLC_ROUTED_HEADER_2684[6] ={0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00};
++
++unsigned long PPP_LLC_HEADER  = 0xCF03FEFE;
++
++/* struct definition */
++enum
++{  
++  AAL5_ENCAP_PPP_LLC,
++  AAL5_ENCAP_PPP_VCMUX,
++  AAL5_ENCAP_RFC2684_LLC_BRIDGED,
++  AAL5_ENCAP_RFC2684_LLC_ROUTED
++};
++
++/* Etherent header */
++typedef struct _turbodsl_ether_header 
++{
++        unsigned char dst_mac_addr[6];
++        unsigned char src_mac_addr[6];
++        unsigned short ether_type;
++} turbodsl_ether_header_t;
++
++
++/* Ip header define */
++typedef struct _turbodsl_ip_header
++{
++
++        unsigned short vit;
++        unsigned short total_length;
++        unsigned short ip_id;
++        unsigned char  flag;            /* bit 0 = 0, bit1 = don't fragment, bit2=more frag */
++  unsigned char  fragment_offset; /* offset include remaining 5 bits above, which make it 13 bits */
++        unsigned char  time_to_live;
++        unsigned char  protocol;
++        unsigned short checksum;
++        unsigned int  src_ip;
++        unsigned int  dst_ip;
++} turbodsl_ip_header_t;
++
++/* Arp packet define */
++typedef struct _turbodsl_arp_header
++{
++        unsigned short hardware_type;
++        unsigned short protocol_type;
++        unsigned char  h_len;
++        unsigned char  p_len;
++        unsigned short operation  ;
++        unsigned char  snd_hw_address[6];
++        unsigned char  snd_pt_address[4];
++        unsigned char  dst_hw_address[6];
++        unsigned char  dst_pt_address[4];
++} turbodsl_arp_header_t;
++
++#define FIN_FLAG 1
++#define SYN_FLAG 1<<1
++#define RST_FLAG 1<<2
++#define PSH_FLAG 1<<3
++#define ACK_FLAG 1<<4
++#define URG_FLAG 1<<5
++
++typedef struct _turbodsl_tcp_header
++{
++        unsigned short src_port;
++        unsigned short dst_port;
++        unsigned int seq_num;
++        unsigned int ack_num;
++  unsigned char  offset; /* only bits 4-7 are for offset */
++  unsigned char  flags;  /* bits: 0-FIN, 1-SYN, 2-RST, 3-PSH, 4-ACK, 5-URG */
++  unsigned short windows; 
++        unsigned short checksum;
++        unsigned short urgent_ptr;
++} turbodsl_tcp_header_t;
++ 
++
++
++/***************************************************************************
++ * Function: turbodsl_memory_compare
++ * Descripation: Memory compare
++ ****************************************************************************/
++int turbodsl_memory_compare(unsigned char *pIn, unsigned char *pOut, unsigned int len)
++  {
++  int i;
++  
++  for(i=0;i<(int)len; i++)
++    {
++    if(pIn[i] != pOut[i])
++      return 0;
++    }
++  return 1;
++  }
++
++/***************************************************************************
++ * Function: turbodsl_check_aal5_encap_type
++ * Descripation: Determine AAL5 Encapsulation type
++ * Input:
++ *        unsigned char *pData, AAL5 Packet buffer pointer
++ ****************************************************************************/
++int turbodsl_check_aal5_encap_type(unsigned char *pData)
++  {
++  
++  if(turbodsl_memory_compare(pData, LLC_BRIDGED_HEADER_2684, 6))
++    return AAL5_ENCAP_RFC2684_LLC_BRIDGED;
++  if(turbodsl_memory_compare(pData, LLC_ROUTED_HEADER_2684, 6))
++    return AAL5_ENCAP_RFC2684_LLC_ROUTED;
++  if(turbodsl_memory_compare(pData, (unsigned char *)&PPP_LLC_HEADER, sizeof(PPP_LLC_HEADER)))
++    return AAL5_ENCAP_PPP_LLC;
++ 
++  return AAL5_ENCAP_PPP_VCMUX;
++  }
++  
++/***************************************************************************
++ * Function: turbodsl_check_priority_type
++ * Descripation: Determine AAL5 Encapsulation type
++ * Input:
++ *        unsigned char *pData, AAL5 Packet buffer pointer.
++ *        short vpi, VPI.
++ *        int vci,  VCI
++ ****************************************************************************/
++int turbodsl_check_priority_type(unsigned char *pData)
++  {
++  int encap;
++  unsigned char *pP;
++  unsigned short etherType;
++  turbodsl_ip_header_t *pIp;
++  turbodsl_tcp_header_t *pTcp;
++  unsigned short ip_length;
++  
++  dprintf(2, "turbodsl_check_priority_type ==>\n");
++
++  encap = turbodsl_check_aal5_encap_type(pData);
++  pP = pData;
++
++  switch(encap)
++    {
++    case AAL5_ENCAP_RFC2684_LLC_BRIDGED:
++      pP += RFC2684_BRIDGED_HDR_SIZE; //skip off aal5 encap
++      pP += 12;               //skip of mac address
++      etherType = *(unsigned short *)pP;
++      if(etherType != 0x6488 && etherType != 0x0008)
++        {
++        //Not an IP packet
++        return 1;
++        }
++
++      pP +=2;                 //skip ether type
++      if(etherType == 0x6488)
++        {
++        pP += 6;
++        }
++      break;
++    case AAL5_ENCAP_RFC2684_LLC_ROUTED:
++      pP += RFC2684_ROUTED_HDR_SIZE; //skip of encap
++      pP += 2; //skip ether type
++      break;
++    case AAL5_ENCAP_PPP_LLC:
++      pP += sizeof(PPP_LLC_HEADER);
++      if(*pP == 0xff && *(pP+1) == 0x03) //ppp hdlc header
++        pP += 2;
++      break;
++    case AAL5_ENCAP_PPP_VCMUX:
++      if(*pP == 0xff && *(pP+1) == 0x03) //ppp hdlc header
++        pP += 2;
++      break;
++    default:
++      return 1;
++    }
++
++  pIp = (turbodsl_ip_header_t *)pP;
++  if(pIp->vit != 0x0045)
++    {
++    //Not a IP packet
++    return 1;
++    }
++
++  if(pIp->protocol != 0x06) 
++    {
++    //not tcp packet
++    return 1;
++    }
++  
++  pTcp = (turbodsl_tcp_header_t *)(pP + sizeof(turbodsl_ip_header_t));
++
++  ip_length = (pIp->total_length>>8) + (pIp->total_length<<8);
++  
++  if((pTcp->flags & ACK_FLAG) && ip_length <=40)
++    return 0;
++
++  return 1;
++  }
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++  
+diff -urN linux.old/include/linux/atmdev.h linux.dev/include/linux/atmdev.h
+--- linux.old/include/linux/atmdev.h	2005-08-22 23:18:37.812526104 +0200
++++ linux.dev/include/linux/atmdev.h	2005-08-23 06:33:33.425389944 +0200
+@@ -30,6 +30,9 @@
+ #define ATM_DS3_PCR	(8000*12)
+ 			/* DS3: 12 cells in a 125 usec time slot */
+ 
++#define ATM_PDU_OVHD	0	/* number of bytes to charge against buffer
++				   quota per PDU */
++
+ #define ATM_SD(s)	((s)->sk->protinfo.af_atm)
+ 
+ 
+@@ -94,7 +97,8 @@
+ 					/* set backend handler */
+ #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+ 					/* use backend to make new if */
+-
++#define ATM_STOPTX      _IOW('a',ATMIOC_SPECIAL+4,struct atmif_sioc)
++					/* Stop Tx on Sangam DSL */
+ /*
+  * These are backend handkers that can be set via the ATM_SETBACKEND call
+  * above.  In the future we may support dynamic loading of these - for now,
+@@ -199,7 +203,9 @@
+     "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
+ 
+ 
+-#ifdef __KERNEL__
++#ifndef __KERNEL__
++#undef __AAL_STAT_ITEMS
++#else
+ 
+ #include <linux/sched.h> /* wait_queue_head_t */
+ #include <linux/time.h> /* struct timeval */
+@@ -291,6 +297,7 @@
+ 	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+ 	void		*dev_data;	/* per-device data */
+ 	void		*proto_data;	/* per-protocol data */
++	struct timeval	timestamp;	/* AAL timestamps */
+ 	struct k_atm_aal_stats *stats;	/* pointer to AAL stats group */
+ 	wait_queue_head_t sleep;	/* if socket is busy */
+ 	struct sock	*sk;		/* socket backpointer */
+@@ -333,13 +340,14 @@
+ 	struct k_atm_dev_stats stats;	/* statistics */
+ 	char		signal;		/* signal status (ATM_PHY_SIG_*) */
+ 	int		link_rate;	/* link rate (default: OC3) */
+-	atomic_t	refcnt;		/* reference count */
+-	spinlock_t	lock;		/* protect internal members */
++        atomic_t        refcnt;         /* reference count */
++        spinlock_t      lock;           /* protect internal members */
+ #ifdef CONFIG_PROC_FS
+ 	struct proc_dir_entry *proc_entry; /* proc entry */
+ 	char *proc_name;		/* proc entry name */
+ #endif
+-	struct list_head dev_list;	/* linkage */
++	struct list_head dev_list;      /* linkage */
++
+ };
+ 
+ 
diff --git a/openwrt/target/linux/ar7-2.4/patches/005-wdt_driver.patch b/openwrt/target/linux/ar7-2.4/patches/005-wdt_driver.patch
new file mode 100644
index 0000000..9b01a35
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/patches/005-wdt_driver.patch
@@ -0,0 +1,392 @@
+diff -ruN linux-2.4.30-patch006/drivers/char/ar7_wdt.c linux-2.4.30-patch007/drivers/char/ar7_wdt.c
+--- linux-2.4.30-patch006/drivers/char/ar7_wdt.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30-patch007/drivers/char/ar7_wdt.c	2005-10-27 09:39:40.000000000 +0200
+@@ -0,0 +1,335 @@
++/* linux/drivers/char/ar7_wdt.c 
++
++   TI AR7 watch dog timer support
++
++   Copyright (c) 2005 Enrik Berkhan <Enrik.Berkhan@akk.org>
++
++   Som code taken from:
++   National Semiconductor SCx200 Watchdog support
++   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
++
++   This program is free software; you can redistribute it and/or
++   modify it under the terms of the GNU General Public License as
++   published by the Free Software Foundation; either version 2 of the
++   License, or (at your option) any later version.
++
++   The author(s) of this software shall not be held liable for damages
++   of any nature resulting due to the use of this software. This
++   software is provided AS-IS with no warranties. */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/notifier.h>
++#include <linux/reboot.h>
++#include <linux/ioport.h>
++
++#include <asm/uaccess.h>
++
++#include <asm/ar7/avalanche_misc.h>
++#include <asm/ar7/sangam.h>
++
++#define NAME "ar7_wdt"
++#define LONGNAME "TI AR7 Watchdog Timer"
++
++MODULE_AUTHOR("Enrik Berkhan <Enrik.Berkhan@akk.org>");
++MODULE_DESCRIPTION(LONGNAME);
++MODULE_LICENSE("GPL");
++
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++#define CONFIG_WATCHDOG_NOWAYOUT 0
++#endif
++
++static int margin = 60;
++MODULE_PARM(margin, "i");
++MODULE_PARM_DESC(margin, "Watchdog margin in seconds (1 - ~68)");
++
++static int nowayout = CONFIG_WATCHDOG_NOWAYOUT;
++MODULE_PARM(nowayout, "i");
++MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
++
++typedef struct {
++  uint32_t kick_lock;
++  uint32_t kick;
++  uint32_t change_lock;
++  uint32_t change ;
++  uint32_t disable_lock;
++  uint32_t disable;
++  uint32_t prescale_lock;
++  uint32_t prescale;
++} ar7_wdt_t;
++
++volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)AVALANCHE_WATCHDOG_TIMER_BASE;
++
++static struct semaphore open_semaphore;
++static unsigned expect_close;
++
++/* XXX correct? assumed to be sysfreq/2. get this dynamically ... */
++#define vbus_freq 62500000
++
++/* XXX currently fixed, allows max margin ~68.72 secs */
++#define prescale_value 0xFFFF
++
++static void ar7_wdt_kick(uint32_t value)
++{
++  ar7_wdt->kick_lock = 0x5555;
++  if ((ar7_wdt->kick_lock & 3) == 1) {
++    ar7_wdt->kick_lock = 0xAAAA;
++    if ((ar7_wdt->kick_lock & 3) == 3) {
++      ar7_wdt->kick = value;
++      return;
++    }
++  }
++  printk(KERN_ERR NAME "failed to unlock WDT kick reg\n");
++}
++
++static void ar7_wdt_prescale(uint32_t value)
++{
++  ar7_wdt->prescale_lock = 0x5A5A;
++  if ((ar7_wdt->prescale_lock & 3) == 1) {
++    ar7_wdt->prescale_lock = 0xA5A5;
++    if ((ar7_wdt->prescale_lock & 3) == 3) {
++      ar7_wdt->prescale = value;
++      return;
++    }
++  }
++  printk(KERN_ERR NAME "failed to unlock WDT prescale reg\n");
++}
++
++static void ar7_wdt_change(uint32_t value)
++{
++  ar7_wdt->change_lock = 0x6666;
++  if ((ar7_wdt->change_lock & 3) == 1) {
++    ar7_wdt->change_lock = 0xBBBB;
++    if ((ar7_wdt->change_lock & 3) == 3) {
++      ar7_wdt->change = value;
++      return;
++    }
++  }
++  printk(KERN_ERR NAME "failed to unlock WDT change reg\n");
++}
++
++static void ar7_wdt_disable(uint32_t value)
++{
++  ar7_wdt->disable_lock = 0x7777;
++  if ((ar7_wdt->disable_lock & 3) == 1) {
++    ar7_wdt->disable_lock = 0xCCCC;
++    if ((ar7_wdt->disable_lock & 3) == 2) {
++      ar7_wdt->disable_lock = 0xDDDD; 
++      if ((ar7_wdt->disable_lock & 3) == 3) {
++	ar7_wdt->disable = value;
++	return;
++      }
++    }
++  }
++  printk(KERN_ERR NAME "failed to unlock WDT disable reg\n");
++  return;
++}
++
++static void ar7_wdt_update_margin(int new_margin)
++{
++        uint32_t change;
++
++	change = new_margin * (vbus_freq / prescale_value);
++	if (change < 1) change = 1;
++	if (change > 0xFFFF) change = 0xFFFF;
++	ar7_wdt_change(change);
++	margin = change * prescale_value / vbus_freq;
++	printk(KERN_INFO NAME
++	       ": timer margin %d seconds (prescale %d, change %d, freq %d)\n",
++	       margin, prescale_value, change, vbus_freq);
++}
++
++static void ar7_wdt_enable_wdt(void)
++{
++	printk(KERN_DEBUG NAME ": enabling watchdog timer\n");
++	ar7_wdt_disable(1);
++	ar7_wdt_kick(1);
++}
++
++static void ar7_wdt_disable_wdt(void)
++{
++	printk(KERN_DEBUG NAME ": disabling watchdog timer\n");
++	ar7_wdt_disable(0);
++}
++
++static int ar7_wdt_open(struct inode *inode, struct file *file)
++{
++        /* only allow one at a time */
++        if (down_trylock(&open_semaphore))
++                return -EBUSY;
++	ar7_wdt_enable_wdt();
++	expect_close = 0;
++
++	return 0;
++}
++
++static int ar7_wdt_release(struct inode *inode, struct file *file)
++{
++	if (!expect_close) {
++		printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n");
++	} else if (!nowayout) {
++		ar7_wdt_disable_wdt();
++	}
++        up(&open_semaphore);
++
++	return 0;
++}
++
++static int ar7_wdt_notify_sys(struct notifier_block *this, 
++				      unsigned long code, void *unused)
++{
++        if (code == SYS_HALT || code == SYS_POWER_OFF)
++		if (!nowayout)
++			ar7_wdt_disable_wdt();
++
++        return NOTIFY_DONE;
++}
++
++static struct notifier_block ar7_wdt_notifier =
++{
++        .notifier_call = ar7_wdt_notify_sys
++};
++
++static ssize_t ar7_wdt_write(struct file *file, const char *data, 
++				     size_t len, loff_t *ppos)
++{
++	if (ppos != &file->f_pos)
++		return -ESPIPE;
++
++	/* check for a magic close character */
++	if (len) 
++	{
++		size_t i;
++
++		ar7_wdt_kick(1);
++
++		expect_close = 0;
++		for (i = 0; i < len; ++i) {
++			char c;
++			if (get_user(c, data+i))
++				return -EFAULT;
++			if (c == 'V')
++				expect_close = 1;
++		}
++
++	}
++	return len;
++}
++
++static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
++	unsigned int cmd, unsigned long arg)
++{
++	static struct watchdog_info ident = {
++		.identity = LONGNAME,
++		.firmware_version = 1, 
++		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING),
++	};
++	int new_margin;
++	
++	switch (cmd) {
++	default:
++		return -ENOTTY;
++	case WDIOC_GETSUPPORT:
++		if(copy_to_user((struct watchdog_info *)arg, &ident, 
++				sizeof(ident)))
++			return -EFAULT;
++		return 0;
++	case WDIOC_GETSTATUS:
++	case WDIOC_GETBOOTSTATUS:
++		if (put_user(0, (int *)arg))
++			return -EFAULT;
++		return 0;
++	case WDIOC_KEEPALIVE:
++		ar7_wdt_kick(1);
++		return 0;
++	case WDIOC_SETTIMEOUT:
++		if (get_user(new_margin, (int *)arg))
++			return -EFAULT;
++		if (new_margin < 1)
++			return -EINVAL;
++
++		ar7_wdt_update_margin(new_margin);
++		ar7_wdt_kick(1);
++
++	case WDIOC_GETTIMEOUT:
++		if (put_user(margin, (int *)arg))
++			return -EFAULT;
++		return 0;
++	}
++}
++
++static struct file_operations ar7_wdt_fops = {
++	.owner	 = THIS_MODULE,
++	.write   = ar7_wdt_write,
++	.ioctl   = ar7_wdt_ioctl,
++	.open    = ar7_wdt_open,
++	.release = ar7_wdt_release,
++};
++
++static struct miscdevice ar7_wdt_miscdev = {
++	.minor = WATCHDOG_MINOR,
++	.name  = "watchdog",
++	.fops  = &ar7_wdt_fops,
++};
++
++static __initdata char *last_initiator[] = {
++  [HARDWARE_RESET] = "hardware reset",
++  [SOFTWARE_RESET0] = "SW0 software reset",
++  [SOFTWARE_RESET1] = "SW1 software reset",
++  [WATCHDOG_RESET] = "watchdog"
++};
++
++static int __init ar7_wdt_init(void)
++{
++	int r;
++
++	if (!request_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE,
++				sizeof(ar7_wdt_t), LONGNAME)) {
++		printk(KERN_WARNING NAME ": watchdog I/O region busy\n");
++		return -EBUSY;
++	}
++
++	printk(KERN_INFO NAME ": last system reset initiated by %s\n",
++	       last_initiator[avalanche_get_sys_last_reset_status()]);
++
++
++	ar7_wdt_disable_wdt();
++	ar7_wdt_prescale(prescale_value);
++	ar7_wdt_update_margin(margin);
++
++	sema_init(&open_semaphore, 1);
++
++	r = misc_register(&ar7_wdt_miscdev);
++	if (r) {
++                printk(KERN_ERR NAME ": unable to register misc device\n");
++		release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE,
++				   sizeof(ar7_wdt_t));
++		return r;
++	}
++
++	r = register_reboot_notifier(&ar7_wdt_notifier);
++        if (r) {
++                printk(KERN_ERR NAME ": unable to register reboot notifier\n");
++		misc_deregister(&ar7_wdt_miscdev);
++		release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE,
++				   sizeof(ar7_wdt_t));
++                return r;
++        }
++
++	return 0;
++}
++
++static void __exit ar7_wdt_cleanup(void)
++{
++        unregister_reboot_notifier(&ar7_wdt_notifier);
++	misc_deregister(&ar7_wdt_miscdev);
++	release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE, sizeof(ar7_wdt_t));
++}
++
++module_init(ar7_wdt_init);
++module_exit(ar7_wdt_cleanup);
+diff -ruN linux-2.4.30-patch006/drivers/char/Config.in linux-2.4.30-patch007/drivers/char/Config.in
+--- linux-2.4.30-patch006/drivers/char/Config.in	2005-10-27 11:25:29.000000000 +0200
++++ linux-2.4.30-patch007/drivers/char/Config.in	2005-10-27 11:17:32.000000000 +0200
+@@ -251,6 +251,9 @@
+ bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
+ if [ "$CONFIG_WATCHDOG" != "n" ]; then
+    bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
++   if [ "$CONFIG_AR7" = "y" ] ; then
++     tristate '  TI AR7 Watchdog Timer' CONFIG_AR7_WDT
++   else
+    tristate '  Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
+    tristate '  Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
+    tristate '  ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
+@@ -271,7 +274,6 @@
+    tristate '  SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
+    dep_tristate '  SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
+    tristate '  NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
+-   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
+    tristate '  W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
+    tristate '  WDT Watchdog timer' CONFIG_WDT
+    tristate '  WDT PCI Watchdog timer' CONFIG_WDTPCI
+@@ -282,6 +284,8 @@
+       fi
+    fi
+    tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
++   fi
++   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
+    if [ "$CONFIG_SGI_IP22" = "y" ]; then
+       dep_tristate '  Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
+    fi
+diff -ruN linux-2.4.30-patch006/drivers/char/Makefile linux-2.4.30-patch007/drivers/char/Makefile
+--- linux-2.4.30-patch006/drivers/char/Makefile	2005-10-27 11:19:38.000000000 +0200
++++ linux-2.4.30-patch007/drivers/char/Makefile	2005-10-27 09:39:40.000000000 +0200
+@@ -342,6 +342,7 @@
+ obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
+ obj-$(CONFIG_INDYDOG) += indydog.o
+ obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
++obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ 
+ subdir-$(CONFIG_MWAVE) += mwave
+ ifeq ($(CONFIG_MWAVE),y)
+diff -ruN linux-2.4.30-patch006/include/asm-mips/ar7/sangam.h linux-2.4.30-patch007/include/asm-mips/ar7/sangam.h
+--- linux-2.4.30-patch006/include/asm-mips/ar7/sangam.h	2005-10-27 11:25:51.000000000 +0200
++++ linux-2.4.30-patch007/include/asm-mips/ar7/sangam.h	2005-10-27 11:13:37.000000000 +0200
+@@ -152,7 +152,7 @@
+ #define AVALANCHE_EMIF_SDRAM_CFG      (AVALANCHE_EMIF_CONTROL_BASE + 0x8)
+ #define AVALANCHE_RST_CTRL_PRCR       (KSEG1ADDR(0x08611600))
+ #define AVALANCHE_RST_CTRL_SWRCR      (KSEG1ADDR(0x08611604))
+-#define AVALANCHE_RST_CTRL_RSR        (KSEG1ADDR(0x08611600))
++#define AVALANCHE_RST_CTRL_RSR        (KSEG1ADDR(0x08611608))
+ 
+ #define AVALANCHE_POWER_CTRL_PDCR     (KSEG1ADDR(0x08610A00))
+ #define AVALANCHE_WAKEUP_CTRL_WKCR    (KSEG1ADDR(0x08610A0C))
diff --git a/openwrt/target/linux/ar7-2.4/patches/006-sched_use_tsc.patch b/openwrt/target/linux/ar7-2.4/patches/006-sched_use_tsc.patch
new file mode 100644
index 0000000..5b64310
--- /dev/null
+++ b/openwrt/target/linux/ar7-2.4/patches/006-sched_use_tsc.patch
@@ -0,0 +1,84 @@
+diff -urN linux.old/arch/mips/kernel/time.c linux.dev/arch/mips/kernel/time.c
+--- linux.old/arch/mips/kernel/time.c	2005-11-14 11:06:38.661262000 +0100
++++ linux.dev/arch/mips/kernel/time.c	2005-11-15 20:02:50.059676750 +0100
+@@ -151,6 +151,27 @@
+ unsigned int (*mips_hpt_read)(void);
+ void (*mips_hpt_init)(unsigned int);
+ 
++extern __u32 get_htscl(void)
++{
++	return timerhi;
++}
++
++static __u64 tscll_last = 0;
++
++extern __u64 get_tscll(void)
++{
++	__u64 h = (__u64) timerhi;
++	__u32 c = read_c0_count();
++
++	h <<= 32;
++	h += c;
++
++	while (h < tscll_last)
++		h += (((__u64) 1) << 32);
++
++	tscll_last = h;
++	return h;	
++}
+ 
+ /*
+  * timeofday services, for syscalls.
+@@ -761,3 +782,5 @@
+ EXPORT_SYMBOL(to_tm);
+ EXPORT_SYMBOL(rtc_set_time);
+ EXPORT_SYMBOL(rtc_get_time);
++EXPORT_SYMBOL(get_htscl);
++EXPORT_SYMBOL(get_tscll);
+diff -urN linux.old/include/asm-mips/timex.h linux.dev/include/asm-mips/timex.h
+--- linux.old/include/asm-mips/timex.h	2005-11-14 11:06:38.685263500 +0100
++++ linux.dev/include/asm-mips/timex.h	2005-11-14 11:02:21.069163500 +0100
+@@ -31,6 +31,19 @@
+ 	return read_c0_count();
+ }
+ 
++extern __u32 get_htscl(void);
++extern __u64 get_tscll(void);
++
++#define rdtsc(low, high) \
++		high = get_htscl(); \
++		low = read_c0_count();
++
++#define rdtscl(low) \
++		low = read_c0_count();
++
++#define rdtscll(val) \
++		val = get_tscll();
++
+ #define vxtime_lock()		do {} while (0)
+ #define vxtime_unlock()		do {} while (0)
+ 
+diff -urN linux.old/include/net/pkt_sched.h linux.dev/include/net/pkt_sched.h
+--- linux.old/include/net/pkt_sched.h	2005-11-14 11:06:38.709265000 +0100
++++ linux.dev/include/net/pkt_sched.h	2005-11-14 11:02:21.069163500 +0100
+@@ -5,7 +5,11 @@
+ #define PSCHED_JIFFIES 		2
+ #define PSCHED_CPU 		3
+ 
++#ifdef __mips__
++#define PSCHED_CLOCK_SOURCE	PSCHED_CPU
++#else
+ #define PSCHED_CLOCK_SOURCE	PSCHED_JIFFIES
++#endif
+ 
+ #include <linux/config.h>
+ #include <linux/types.h>
+@@ -271,7 +275,7 @@
+ #define PSCHED_US2JIFFIE(delay) (((delay)+psched_clock_per_hz-1)/psched_clock_per_hz)
+ #define PSCHED_JIFFIE2US(delay) ((delay)*psched_clock_per_hz)
+ 
+-#ifdef CONFIG_X86_TSC
++#if defined(CONFIG_X86_TSC) || defined(__mips__)
+ 
+ #define PSCHED_GET_TIME(stamp) \
+ ({ u64 __cur; \