hostapd: add a build variant for wpa_supplicant and one for a multicall hostapd+supplicant program (wpad) and remove the old wpa_supplicant package

SVN-Revision: 19286

13 files changed, 0 insertions, 1558 deletions

diff --git a/package/wpa_supplicant/Config.in b/package/wpa_supplicant/Config.in
deleted file mode 100644
index 10b8a43..0000000
--- a/package/wpa_supplicant/Config.in
+++ /dev/null
@@ -1,21 +0,0 @@
-# wpa_supplicant config
-config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
-	bool "Disable timestamp check"
-	depends PACKAGE_wpa-supplicant
-	default n
-	help
-	  This disables the timestamp check for certificates in wpa_supplicant
-	  Useful for devices without RTC that cannot reliably get the real date/time
-choice
-        prompt "Choose TLS provider"
-        default WPA_SUPPLICANT_INTERNAL
-	depends PACKAGE_wpa-supplicant
-
-config WPA_SUPPLICANT_INTERNAL
-	bool "internal"
-
-config WPA_SUPPLICANT_OPENSSL
-	bool "openssl"
-	select PACKAGE_libopenssl
-
-endchoice
diff --git a/package/wpa_supplicant/Makefile b/package/wpa_supplicant/Makefile
deleted file mode 100644
index 39c66e7..0000000
--- a/package/wpa_supplicant/Makefile
+++ /dev/null
@@ -1,94 +0,0 @@
-#
-# Copyright (C) 2008-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=wpa_supplicant
-PKG_VERSION:=0.6.9
-PKG_RELEASE:=2
-PKG_MD5SUM:=0efb8fcedf0a8acf6f423dfdb0658fdd
-
-PKG_SOURCE_URL:=http://hostap.epitest.fi/releases
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-
-PKG_BUILD_DEPENDS:= \
-	PACKAGE_kmod-madwifi:madwifi \
-
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_PACKAGE_kmod-madwifi \
-	CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/wpa-supplicant
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=WPA Supplicant
-  DEPENDS:=$(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),+libopenssl)
-  URL:=http://hostap.epitest.fi/wpa_supplicant/
-endef
-
-define Package/wpa-supplicant/Description
- WPA Supplicant
-endef
-
-define Package/wpa-supplicant/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/wpa-cli
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=wpa-supplicant
-  TITLE:=WPA Supplicant command line interface
-endef
-
-define Package/wpa-cli/Description
- WPA Supplicant control utility
-endef
-
-CONFIG=$(firstword $(wildcard ./files/config.$(BOARD) ./files/config.$(ARCH) ./config))
-TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/madwifi $(if $(CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK),-DNO_TIMESTAMP_CHECK)
-
-define Build/Configure
-	cp $(CONFIG) $(PKG_BUILD_DIR)/wpa_supplicant/.config
-	[ -f $(STAMP_CONFIGURED) ] || $(MAKE) -C $(PKG_BUILD_DIR)/wpa_supplicant clean
-	rm -f $(PKG_BUILD_DIR)/.configured*
-	$(if $(CONFIG_PACKAGE_kmod-madwifi),,$(SED) 's,^CONFIG_DRIVER_MADWIFI,#CONFIG_DRIVER_MADWIFI,g' $(PKG_BUILD_DIR)/wpa_supplicant/.config)
-	$(if $(CONFIG_PACKAGE_kmod-hostap),,$(SED) 's,^CONFIG_DRIVER_HOSTAP,#CONFIG_DRIVER_HOSTAP,g' $(PKG_BUILD_DIR)/wpa_supplicant/.config)
-	$(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),$(SED) 's|^CONFIG_TLS.*|CONFIG_TLS=openssl|g' $(PKG_BUILD_DIR)/wpa_supplicant/.config)
-endef
-
-define Build/Compile
-	rm -rf $(PKG_INSTALL_DIR)
-	mkdir -p $(PKG_INSTALL_DIR)
-	CFLAGS="$(TARGET_CFLAGS)" \
-	$(MAKE) -C $(PKG_BUILD_DIR)/wpa_supplicant \
-		CC="$(TARGET_CC)" \
-		KERNEL=$(LINUX_DIR) \
-		CPPFLAGS="$(TARGET_CPPFLAGS)" \
-		LDFLAGS="$(TARGET_LDFLAGS)" \
-		all
-endef
-
-define Package/wpa-supplicant/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) \
-		$(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant \
-		$(PKG_BUILD_DIR)/wpa_supplicant/wpa_passphrase \
-		$(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/lib/wifi
-	$(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh
-endef
-
-define Package/wpa-cli/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,wpa-supplicant))
-$(eval $(call BuildPackage,wpa-cli))
diff --git a/package/wpa_supplicant/config b/package/wpa_supplicant/config
deleted file mode 100644
index 3ca1cfa..0000000
--- a/package/wpa_supplicant/config
+++ /dev/null
@@ -1,382 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#	-I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for Prism54 driver
-# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
-# for developers only)
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-#CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-#CONFIG_DRIVER_NL80211=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-#CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-#CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
-# save about 1 kB in code size when building only WPA-Personal (no EAP support)
-# or 6 kB if building for WPA-Enterprise.
-#CONFIG_NO_WPA2=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Remove AES extra functions. This can be used to reduce code size by about
-# 1.5 kB by removing extra AES modes that are not needed for commonly used
-# client configurations (they are needed for some EAP types).
-#CONFIG_NO_AES_EXTRAS=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-# eloop_none = Empty template
-CONFIG_ELOOP=eloop
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-#CONFIG_GNUTLS_EXTRA=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for DBus control interface
-#CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# Include client MLME (management frame processing).
-# This can be used to move MLME processing of Linux mac80211 stack into user
-# space. Please note that this is currently only available with
-# driver_nl80211.c and only with a modified version of Linux kernel and
-# wpa_supplicant.
-#CONFIG_CLIENT_MLME=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-CONFIG_DEBUG_FILE=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
diff --git a/package/wpa_supplicant/files/config.brcm-2.4 b/package/wpa_supplicant/files/config.brcm-2.4
deleted file mode 100644
index 0e58fa0..0000000
--- a/package/wpa_supplicant/files/config.brcm-2.4
+++ /dev/null
@@ -1,382 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#	-I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for Prism54 driver
-# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
-# for developers only)
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-#CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-#CONFIG_DRIVER_NL80211=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-CONFIG_DRIVER_ROBOSWITCH=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-#CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-#CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
-# save about 1 kB in code size when building only WPA-Personal (no EAP support)
-# or 6 kB if building for WPA-Enterprise.
-#CONFIG_NO_WPA2=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Remove AES extra functions. This can be used to reduce code size by about
-# 1.5 kB by removing extra AES modes that are not needed for commonly used
-# client configurations (they are needed for some EAP types).
-#CONFIG_NO_AES_EXTRAS=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-# eloop_none = Empty template
-CONFIG_ELOOP=eloop
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-#CONFIG_GNUTLS_EXTRA=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for DBus control interface
-#CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# Include client MLME (management frame processing).
-# This can be used to move MLME processing of Linux mac80211 stack into user
-# space. Please note that this is currently only available with
-# driver_nl80211.c and only with a modified version of Linux kernel and
-# wpa_supplicant.
-#CONFIG_CLIENT_MLME=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-CONFIG_DEBUG_FILE=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
diff --git a/package/wpa_supplicant/files/config.brcm47xx b/package/wpa_supplicant/files/config.brcm47xx
deleted file mode 120000
index c3fbf34..0000000
--- a/package/wpa_supplicant/files/config.brcm47xx
+++ /dev/null
@@ -1 +0,0 @@
-config.brcm-2.4
\ No newline at end of file
diff --git a/package/wpa_supplicant/files/config.brcm63xx b/package/wpa_supplicant/files/config.brcm63xx
deleted file mode 120000
index c3fbf34..0000000
--- a/package/wpa_supplicant/files/config.brcm63xx
+++ /dev/null
@@ -1 +0,0 @@
-config.brcm-2.4
\ No newline at end of file
diff --git a/package/wpa_supplicant/files/wpa_supplicant.sh b/package/wpa_supplicant/files/wpa_supplicant.sh
deleted file mode 100644
index ea10b38..0000000
--- a/package/wpa_supplicant/files/wpa_supplicant.sh
+++ /dev/null
@@ -1,116 +0,0 @@
-wpa_supplicant_setup_vif() {
-	local vif="$1"
-	local driver="$2"
-	local key="$key"
-
-	# wpa_supplicant should use wext for mac80211 cards
-	[ "$driver" = "mac80211" ] && driver='wext'
-
-	# make sure we have the psk
-	[ -n "$key" ] || {
-		config_get key "$vif" key
-	}
-
-	case "$enc" in
-		*wep*)
-			key_mgmt='NONE'
-			config_get key "$vif" key
-			key="${key:-1}"
-			case "$key" in
-				[1234])
-					for idx in 1 2 3 4; do
-						local zidx
-						zidx=$(($idx - 1))
-						config_get ckey "$vif" "key${idx}"
-						[ -n "$ckey" ] && \
-							append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
-					done
-					wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
-				;;
-				*)
-					wep_key0="wep_key0=$(prepare_key_wep "$key")"
-					wep_tx_keyidx="wep_tx_keyidx=0"
-				;;
-			esac
-		;;
-		*psk*)
-			key_mgmt='WPA-PSK'
-			config_get_bool usepassphrase "$vif" passphrase 1
-			case "$enc" in
-				*psk2*)
-					proto='proto=RSN'
-					if [ "$usepassphrase" = "1" ]; then
-						passphrase="psk=\"${key}\""
-					else
-						passphrase="psk=${key}"
-					fi
-				;;
-				*psk*)
-					proto='proto=WPA'
-					if [ "$usepassphrase" = "1" ]; then
-						passphrase="psk=\"${key}\""
-					else
-						passphrase="psk=${key}"
-					fi
-				;;
-			esac
-		;;
-		*wpa*|*8021x*)
-			proto='proto=WPA2'
-			key_mgmt='WPA-EAP'
-			config_get ca_cert "$vif" ca_cert
-			ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
-			case "$eap_type" in
-				tls)
-					pairwise='pairwise=CCMP'
-					group='group=CCMP'
-					config_get priv_key "$vif" priv_key
-					config_get priv_key_pwd "$vif" priv_key_pwd
-					priv_key="private_key=\"$priv_key\""
-					priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
-				;;
-				peap|ttls)
-					config_get auth "$vif" auth
-					config_get identity "$vif" identity
-					config_get password "$vif" password
-					phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
-					identity="identity=\"$identity\""
-					password="password=\"$password\""
-				;;
-			esac
-			eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
-		;;
-	esac
-	config_get ifname "$vif" ifname
-	config_get bridge "$vif" bridge
-	config_get ssid "$vif" ssid
-	config_get bssid "$vif" bssid
-	bssid=${bssid:+"bssid=$bssid"}
-	cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
-ctrl_interface=/var/run/wpa_supplicant-$ifname
-network={
-	scan_ssid=1
-	ssid="$ssid"
-	$bssid
-	key_mgmt=$key_mgmt
-	$proto
-	$passphrase
-	$pairwise
-	$group
-	$eap_type
-	$ca_cert
-	$priv_key
-	$priv_key_pwd
-	$phase2
-	$identity
-	$password
-	$wep_key0
-	$wep_key1
-	$wep_key2
-	$wep_key3
-	$wep_tx_keyidx
-}
-EOF
-	[ -z "$proto" -a "$key_mgmt" != "NONE" ] || \
-		wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
-}
diff --git a/package/wpa_supplicant/patches/100-timestamp_check.patch b/package/wpa_supplicant/patches/100-timestamp_check.patch
deleted file mode 100644
index 98fdbbc..0000000
--- a/package/wpa_supplicant/patches/100-timestamp_check.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/src/tls/x509v3.c
-+++ b/src/tls/x509v3.c
-@@ -1591,8 +1591,11 @@ int x509_certificate_chain_validate(stru
- 		if (chain_trusted)
- 			continue;
- 
--		if ((unsigned long) now.sec <
-+		if (
-+#ifndef NO_TIMESTAMP_CHECK
-+		    (unsigned long) now.sec <
- 		    (unsigned long) cert->not_before ||
-+#endif
- 		    (unsigned long) now.sec >
- 		    (unsigned long) cert->not_after) {
- 			wpa_printf(MSG_INFO, "X509: Certificate not valid "
diff --git a/package/wpa_supplicant/patches/110-roaming.patch b/package/wpa_supplicant/patches/110-roaming.patch
deleted file mode 100644
index 077c2e5..0000000
--- a/package/wpa_supplicant/patches/110-roaming.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-This patch decreases the timeouts for assoc/auth to more realistic values. Improves roaming speed
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -854,7 +854,7 @@ static void wpa_supplicant_event_assoc(s
- 		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
- 	} else if (!ft_completed) {
- 		/* Timeout for receiving the first EAPOL packet */
--		wpa_supplicant_req_auth_timeout(wpa_s, 10, 0);
-+		wpa_supplicant_req_auth_timeout(wpa_s, 3, 0);
- 	}
- 	wpa_supplicant_cancel_scan(wpa_s);
- 
---- a/wpa_supplicant/scan.c
-+++ b/wpa_supplicant/scan.c
-@@ -189,6 +189,7 @@ static void wpa_supplicant_scan(void *el
- 	}
- #endif /* CONFIG_WPS */
- 
-+	wpa_drv_flush_pmkid(wpa_s);
- 	if (wpa_s->use_client_mlme) {
- 		ieee80211_sta_set_probe_req_ie(wpa_s, extra_ie, extra_ie_len);
- 		ret = ieee80211_sta_req_scan(wpa_s, ssid ? ssid->ssid : NULL,
-@@ -203,7 +204,7 @@ static void wpa_supplicant_scan(void *el
- 
- 	if (ret) {
- 		wpa_printf(MSG_WARNING, "Failed to initiate AP scan.");
--		wpa_supplicant_req_scan(wpa_s, 10, 0);
-+		wpa_supplicant_req_scan(wpa_s, 3, 0);
- 	} else
- 		wpa_s->scan_runs++;
- }
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1160,10 +1160,10 @@ void wpa_supplicant_associate(struct wpa
- 
- 		if (assoc_failed) {
- 			/* give IBSS a bit more time */
-- 			timeout = ssid->mode ? 10 : 5;
-+ 			timeout = ssid->mode ? 5 : 2;
- 		} else if (wpa_s->conf->ap_scan == 1) {
- 			/* give IBSS a bit more time */
-- 			timeout = ssid->mode ? 20 : 10;
-+ 			timeout = ssid->mode ? 7 : 3;
- 		}
- 		wpa_supplicant_req_auth_timeout(wpa_s, timeout, 0);
- 	}
diff --git a/package/wpa_supplicant/patches/120-ssid_scan.patch b/package/wpa_supplicant/patches/120-ssid_scan.patch
deleted file mode 100644
index 6beaed4..0000000
--- a/package/wpa_supplicant/patches/120-ssid_scan.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-Don't do broadcast SSID scans, if all configured SSIDs use scan_ssid=1. Improves background scanning in supplicant-managed roaming.
-
---- a/wpa_supplicant/scan.c
-+++ b/wpa_supplicant/scan.c
-@@ -73,6 +73,7 @@ static void wpa_supplicant_scan(void *el
- 	struct wpabuf *wps_ie = NULL;
- 	const u8 *extra_ie = NULL;
- 	size_t extra_ie_len = 0;
-+	int scan_ssid_all = 1;
- 	int wps = 0;
- #ifdef CONFIG_WPS
- 	enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO;
-@@ -82,6 +83,17 @@ static void wpa_supplicant_scan(void *el
- 		return;
- 
- 	enabled = 0;
-+
-+	/* check if all configured ssids should be scanned directly */
-+	ssid = wpa_s->conf->ssid;
-+	while (ssid) {
-+		if (!ssid->scan_ssid) {
-+			scan_ssid_all = 0;
-+			break;
-+		}
-+		ssid = ssid->next;
-+	}
-+
- 	ssid = wpa_s->conf->ssid;
- 	while (ssid) {
- 		if (!ssid->disabled) {
-@@ -154,6 +166,10 @@ static void wpa_supplicant_scan(void *el
- 		return;
- 	}
- 
-+	if (scan_ssid_all && !ssid) {
-+		ssid = wpa_s->conf->ssid;
-+	}
-+
- 	wpa_printf(MSG_DEBUG, "Starting AP scan (%s SSID)",
- 		   ssid ? "specific": "broadcast");
- 	if (ssid) {
diff --git a/package/wpa_supplicant/patches/130-scanning.patch b/package/wpa_supplicant/patches/130-scanning.patch
deleted file mode 100644
index aad4450..0000000
--- a/package/wpa_supplicant/patches/130-scanning.patch
+++ /dev/null
@@ -1,175 +0,0 @@
-Add a scan result cache to improve roaming speed if the driver gave us a background scan before losing the connection.
-
---- a/wpa_supplicant/config.h
-+++ b/wpa_supplicant/config.h
-@@ -97,6 +97,12 @@ struct wpa_config {
- 	int ap_scan;
- 
- 	/**
-+	 * scan_cache - controls the time in seconds after the last scan results
-+	 * before a new scan may be initiated
-+	 */
-+	int scan_cache;
-+
-+	/**
- 	 * ctrl_interface - Parameters for the control interface
- 	 *
- 	 * If this is specified, %wpa_supplicant will open a control interface
---- a/wpa_supplicant/config_file.c
-+++ b/wpa_supplicant/config_file.c
-@@ -306,6 +306,13 @@ static int wpa_config_parse_int(const st
- 	return 0;
- }
- 
-+static int wpa_config_process_scan_cache(struct wpa_config *config, char *pos)
-+{
-+	config->scan_cache = atoi(pos);
-+	wpa_printf(MSG_DEBUG, "scan_cache=%d", config->scan_cache);
-+	return 0;
-+}
-+
- 
- static int wpa_config_parse_str(const struct global_parse_data *data,
- 				struct wpa_config *config, int line,
-@@ -433,6 +440,7 @@ static const struct global_parse_data gl
- #endif /* CONFIG_CTRL_IFACE */
- 	{ INT_RANGE(eapol_version, 1, 2) },
- 	{ INT(ap_scan) },
-+	{ INT(scan_cache) },
- 	{ INT(fast_reauth) },
- #ifdef EAP_TLS_OPENSSL
- 	{ STR(opensc_engine_path) },
-@@ -835,6 +843,8 @@ static void wpa_config_write_global(FILE
- 		fprintf(f, "eapol_version=%d\n", config->eapol_version);
- 	if (config->ap_scan != DEFAULT_AP_SCAN)
- 		fprintf(f, "ap_scan=%d\n", config->ap_scan);
-+	if (config->scan_cache != 0)
-+		fprintf(f, "scan_cache=%d\n", config->scan_cache);
- 	if (config->fast_reauth != DEFAULT_FAST_REAUTH)
- 		fprintf(f, "fast_reauth=%d\n", config->fast_reauth);
- #ifdef EAP_TLS_OPENSSL
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -541,7 +541,7 @@ wpa_supplicant_select_bss_non_wpa(struct
- 					   "BSSID mismatch");
- 				continue;
- 			}
--			
-+
- 			if (!(ssid->key_mgmt & WPA_KEY_MGMT_NONE) &&
- 			    !(ssid->key_mgmt & WPA_KEY_MGMT_WPS) &&
- 			    !(ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA))
-@@ -551,7 +551,7 @@ wpa_supplicant_select_bss_non_wpa(struct
- 				continue;
- 			}
- 
--			if ((ssid->key_mgmt & 
-+			if ((ssid->key_mgmt &
- 			     (WPA_KEY_MGMT_IEEE8021X | WPA_KEY_MGMT_PSK |
- 			      WPA_KEY_MGMT_FT_IEEE8021X | WPA_KEY_MGMT_FT_PSK |
- 			      WPA_KEY_MGMT_IEEE8021X_SHA256 |
-@@ -640,6 +640,9 @@ static void wpa_supplicant_event_scan_re
- 	    wpa_s->disconnected)
- 		return;
- 
-+	if (wpa_s->wpa_state > WPA_ASSOCIATED)
-+		goto done;
-+
- 	while (selected == NULL) {
- 		for (prio = 0; prio < wpa_s->conf->num_prio; prio++) {
- 			selected = wpa_supplicant_select_bss(
-@@ -652,6 +655,7 @@ static void wpa_supplicant_event_scan_re
- 			wpa_printf(MSG_DEBUG, "No APs found - clear blacklist "
- 				   "and try again");
- 			wpa_blacklist_clear(wpa_s);
-+ 			memset(&wpa_s->last_scan_results, 0, sizeof(wpa_s->last_scan_results));
- 			wpa_s->blacklist_cleared++;
- 		} else if (selected == NULL) {
- 			break;
-@@ -687,10 +691,12 @@ static void wpa_supplicant_event_scan_re
- 		rsn_preauth_scan_results(wpa_s->wpa, wpa_s->scan_res);
- 	} else {
- 		wpa_printf(MSG_DEBUG, "No suitable AP found.");
--		timeout = 5;
-+		timeout = 0;
- 		goto req_scan;
- 	}
- 
-+done:
-+	os_get_time(&wpa_s->last_scan_results);
- 	return;
- 
- req_scan:
-@@ -894,6 +900,9 @@ static void wpa_supplicant_event_disasso
- 	}
- 	if (wpa_s->wpa_state >= WPA_ASSOCIATED)
- 		wpa_supplicant_req_scan(wpa_s, 0, 100000);
-+	else if (wpa_s->wpa_state == WPA_ASSOCIATING)
-+		wpa_supplicant_req_auth_timeout(wpa_s, 0, 100000);
-+
- 	bssid = wpa_s->bssid;
- 	if (is_zero_ether_addr(bssid))
- 		bssid = wpa_s->pending_bssid;
---- a/wpa_supplicant/wpa_supplicant_i.h
-+++ b/wpa_supplicant/wpa_supplicant_i.h
-@@ -350,6 +350,7 @@ struct wpa_supplicant {
- 	struct wpa_client_mlme mlme;
- 	int use_client_mlme;
- 	int driver_4way_handshake;
-+	struct os_time last_scan_results;
- 
- 	int pending_mic_error_report;
- 	int pending_mic_error_pairwise;
-@@ -405,6 +406,7 @@ int wpa_supplicant_scard_init(struct wpa
- 
- /* scan.c */
- void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec);
-+int wpa_supplicant_may_scan(struct wpa_supplicant *wpa_s);
- void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s);
- 
- /* events.c */
---- a/wpa_supplicant/scan.c
-+++ b/wpa_supplicant/scan.c
-@@ -40,6 +40,18 @@ static void wpa_supplicant_gen_assoc_eve
- 	wpa_supplicant_event(wpa_s, EVENT_ASSOC, &data);
- }
- 
-+int wpa_supplicant_may_scan(struct wpa_supplicant *wpa_s)
-+{
-+	struct os_time time;
-+
-+	if (wpa_s->conf->scan_cache > 0) {
-+		os_get_time(&time);
-+		time.sec -= wpa_s->conf->scan_cache;
-+		if (os_time_before(&time, &wpa_s->last_scan_results))
-+			return 0;
-+	}
-+	return 1;
-+}
- 
- #ifdef CONFIG_WPS
- static int wpas_wps_in_use(struct wpa_config *conf,
-@@ -183,8 +195,9 @@ static void wpa_supplicant_scan(void *el
- 	wps = wpas_wps_in_use(wpa_s->conf, &req_type);
- #endif /* CONFIG_WPS */
- 
--	if (wpa_s->scan_res_tried == 0 && wpa_s->conf->ap_scan == 1 &&
--	    !wpa_s->use_client_mlme && wps != 2) {
-+	if (!wpa_supplicant_may_scan(wpa_s) ||
-+	    (wpa_s->scan_res_tried == 0 && wpa_s->conf->ap_scan == 1 &&
-+	    !wpa_s->use_client_mlme && wps != 2)) {
- 		wpa_s->scan_res_tried++;
- 		wpa_s->scan_req = scan_req;
- 		wpa_printf(MSG_DEBUG, "Trying to get current scan results "
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1491,6 +1491,9 @@ void wpa_supplicant_rx_eapol(void *ctx, 
- {
- 	struct wpa_supplicant *wpa_s = ctx;
- 
-+	if (wpa_s->wpa_state < WPA_ASSOCIATING)
-+		return;
-+
- 	wpa_printf(MSG_DEBUG, "RX EAPOL from " MACSTR, MAC2STR(src_addr));
- 	wpa_hexdump(MSG_MSGDUMP, "RX EAPOL", buf, len);
- 
diff --git a/package/wpa_supplicant/patches/140-quality.patch b/package/wpa_supplicant/patches/140-quality.patch
deleted file mode 100644
index edb0b26..0000000
--- a/package/wpa_supplicant/patches/140-quality.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1248,7 +1248,7 @@ static int wpa_supplicant_get_scan_resul
- {
- #define SCAN_AP_LIMIT 128
- 	struct wpa_scan_result *results;
--	int num, i;
-+	int num, i, j;
- 	struct wpa_scan_results *res;
- 
- 	results = os_malloc(SCAN_AP_LIMIT * sizeof(struct wpa_scan_result));
-@@ -1345,6 +1345,21 @@ static int wpa_supplicant_get_scan_resul
- 		res->res[res->num++] = r;
- 	}
- 
-+	/* sort scan results by quality */
-+	for(i = 0; i < num - 1; i++) {
-+		for(j = i + 1; j < num; j++) {
-+			struct wpa_scan_result tmp;
-+
-+			if (results[i].qual > results[j].qual)
-+				continue;
-+
-+			os_memcpy(&tmp, &results[i], sizeof(tmp));
-+			os_memcpy(&results[i], &results[j], sizeof(tmp));
-+			os_memcpy(&results[j], &tmp, sizeof(tmp));
-+		}
-+	}
-+
-+
- 	os_free(results);
- 	wpa_s->scan_res = res;
- 
diff --git a/package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch b/package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch
deleted file mode 100644
index 94559f1..0000000
--- a/package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch
+++ /dev/null
@@ -1,251 +0,0 @@
-From 67441c596f016f69c230eaa31ecb2272c6cbf4bf Mon Sep 17 00:00:00 2001
-From: Hamish Guthrie <hamish.guthrie@sonycom.com>
-Date: Wed, 6 Jan 2010 10:00:22 +0100
-Subject: [PATCH] Remove PS3 gelic legacy wpa support
-
-The ps3 wireless driver now supports wireless extensions. There is dedicated support code in wpa_supplicant for the old gelic wireless driver. The current gelic driver retains the old API with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE, which is being removed from the driver.
-
-Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com>
----
- src/drivers/driver_ps3.c |  186 ----------------------------------------------
- src/drivers/drivers.c    |    6 --
- wpa_supplicant/Makefile  |    6 --
- 3 files changed, 0 insertions(+), 198 deletions(-)
- delete mode 100644 src/drivers/driver_ps3.c
-
-diff --git a/src/drivers/driver_ps3.c b/src/drivers/driver_ps3.c
-deleted file mode 100644
-index fde3425..0000000
---- a/src/drivers/driver_ps3.c
-+++ /dev/null
-@@ -1,186 +0,0 @@
--/*
-- * WPA Supplicant - PS3 Linux wireless extension driver interface
-- * Copyright 2007, 2008 Sony Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- * Alternatively, this software may be distributed under the terms of BSD
-- * license.
-- *
-- * See README and COPYING for more details.
-- */
--
--#include "includes.h"
--#include <sys/ioctl.h>
--#include "wireless_copy.h"
--#include "common.h"
--#include "wpa_common.h"
--#include "driver.h"
--#include "eloop.h"
--#include "driver_wext.h"
--#include "ieee802_11_defs.h"
--
--static int wpa_driver_ps3_set_wpa_key(struct wpa_driver_wext_data *drv,
--				struct wpa_driver_associate_params *params)
--{
--	int ret, i;
--	struct iwreq iwr;
--	char *buf, *str;
--
--	if (!params->psk && !params->passphrase) {
--		wpa_printf(MSG_INFO, "%s:no PSK error", __func__);
--		return -EINVAL;
--	}
--
--	os_memset(&iwr, 0, sizeof(iwr));
--	if (params->psk) {
--		/* includes null */
--		iwr.u.data.length = PMK_LEN * 2 + 1;
--		buf = os_malloc(iwr.u.data.length);
--		if (!buf)
--			return -ENOMEM;
--		str = buf;
--		for (i = 0; i < PMK_LEN; i++) {
--			str += snprintf(str, iwr.u.data.length - (str - buf),
--					"%02x", params->psk[i]);
--		}
--	} else if (params->passphrase) {
--		/* including quotations and null */
--		iwr.u.data.length = strlen(params->passphrase) + 3;
--		buf = os_malloc(iwr.u.data.length);
--		if (!buf)
--			return -ENOMEM;
--		buf[0] = '"';
--		os_memcpy(buf + 1, params->passphrase, iwr.u.data.length - 3);
--		buf[iwr.u.data.length - 2] = '"';
--		buf[iwr.u.data.length - 1] = '\0';
--	} else
--		return -EINVAL;
--	iwr.u.data.pointer = (caddr_t) buf;
--	os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
--	ret = ioctl(drv->ioctl_sock, SIOCIWFIRSTPRIV, &iwr);
--	os_free(buf);
--
--	return ret;
--}
--
--static int wpa_driver_ps3_set_wep_keys(struct wpa_driver_wext_data *drv,
--				struct wpa_driver_associate_params *params)
--{
--	int ret, i;
--	struct iwreq iwr;
--
--	for (i = 0; i < 4; i++) {
--		os_memset(&iwr, 0, sizeof(iwr));
--		os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
--		iwr.u.encoding.flags = i + 1;
--		if (params->wep_key_len[i]) {
--			iwr.u.encoding.pointer = (caddr_t) params->wep_key[i];
--			iwr.u.encoding.length = params->wep_key_len[i];
--		} else
--			iwr.u.encoding.flags = IW_ENCODE_NOKEY |
--				IW_ENCODE_DISABLED;
--
--		if (ioctl(drv->ioctl_sock, SIOCSIWENCODE, &iwr) < 0) {
--			perror("ioctl[SIOCSIWENCODE]");
--			ret = -1;
--		}
--	}
--	return ret;
--}
--
--static int wpa_driver_ps3_associate(void *priv,
--				    struct wpa_driver_associate_params *params)
--{
--	struct wpa_driver_wext_data *drv = priv;
--	int ret, value;
--
--	wpa_printf(MSG_DEBUG, "%s: <-", __func__);
--
--	/* clear BSSID */
--	if (!params->bssid &&
--	    wpa_driver_wext_set_bssid(drv, NULL) < 0)
--		ret = -1;
--
--	if (wpa_driver_wext_set_mode(drv, params->mode) < 0)
--		ret = -1;
--
--	if (params->wpa_ie == NULL || params->wpa_ie_len == 0)
--		value = IW_AUTH_WPA_VERSION_DISABLED;
--	else if (params->wpa_ie[0] == WLAN_EID_RSN)
--		value = IW_AUTH_WPA_VERSION_WPA2;
--	else
--		value = IW_AUTH_WPA_VERSION_WPA;
--	if (wpa_driver_wext_set_auth_param(drv,
--					   IW_AUTH_WPA_VERSION, value) < 0)
--		ret = -1;
--	value = wpa_driver_wext_cipher2wext(params->pairwise_suite);
--	if (wpa_driver_wext_set_auth_param(drv,
--					   IW_AUTH_CIPHER_PAIRWISE, value) < 0)
--		ret = -1;
--	value = wpa_driver_wext_cipher2wext(params->group_suite);
--	if (wpa_driver_wext_set_auth_param(drv,
--					   IW_AUTH_CIPHER_GROUP, value) < 0)
--		ret = -1;
--	value = wpa_driver_wext_keymgmt2wext(params->key_mgmt_suite);
--	if (wpa_driver_wext_set_auth_param(drv, IW_AUTH_KEY_MGMT, value) < 0)
--		ret = -1;
--
--	/* set selected BSSID */
--	if (params->bssid &&
--	    wpa_driver_wext_set_bssid(drv, params->bssid) < 0)
--		ret = -1;
--
--	switch (params->group_suite) {
--	case CIPHER_NONE:
--		ret = 0;
--		break;
--	case CIPHER_WEP40:
--	case CIPHER_WEP104:
--		ret = wpa_driver_ps3_set_wep_keys(drv, params);
--		break;
--	case CIPHER_TKIP:
--	case CIPHER_CCMP:
--		ret = wpa_driver_ps3_set_wpa_key(drv, params);
--		break;
--	}
--
--	/* start to associate */
--	ret = wpa_driver_wext_set_ssid(drv, params->ssid, params->ssid_len);
--
--	wpa_printf(MSG_DEBUG, "%s: ->", __func__);
--
--	return ret;
--}
--
--static int wpa_driver_ps3_get_capa(void *priv, struct wpa_driver_capa *capa)
--{
--	int ret;
--	wpa_printf(MSG_DEBUG, "%s:<-", __func__);
--
--	ret = wpa_driver_wext_get_capa(priv, capa);
--	if (ret) {
--		wpa_printf(MSG_INFO, "%s: base wext returns error %d",
--			   __func__, ret);
--		return ret;
--	}
--	/* PS3 hypervisor does association and 4way handshake by itself */
--	capa->flags |= WPA_DRIVER_FLAGS_4WAY_HANDSHAKE;
--	wpa_printf(MSG_DEBUG, "%s:->", __func__);
--	return 0;
--}
--
--const struct wpa_driver_ops wpa_driver_ps3_ops = {
--	.name = "ps3",
--	.desc = "PLAYSTATION3 Linux wireless extension driver",
--	.get_bssid = wpa_driver_wext_get_bssid,
--	.get_ssid = wpa_driver_wext_get_ssid,
--	.scan = wpa_driver_wext_scan,
--	.get_scan_results2 = wpa_driver_wext_get_scan_results,
--	.associate = wpa_driver_ps3_associate, /* PS3 */
--	.init = wpa_driver_wext_init,
--	.deinit = wpa_driver_wext_deinit,
--	.get_capa = wpa_driver_ps3_get_capa, /* PS3 */
--};
-diff --git a/src/drivers/drivers.c b/src/drivers/drivers.c
-index d278797..7e7d720 100644
---- a/src/drivers/drivers.c
-+++ b/src/drivers/drivers.c
-@@ -64,9 +64,6 @@ extern struct wpa_driver_ops wpa_driver_ralink_ops; /* driver_ralink.c */
- #ifdef CONFIG_DRIVER_OSX
- extern struct wpa_driver_ops wpa_driver_osx_ops; /* driver_osx.m */
- #endif /* CONFIG_DRIVER_OSX */
--#ifdef CONFIG_DRIVER_PS3
--extern struct wpa_driver_ops wpa_driver_ps3_ops; /* driver_ps3.c */
--#endif /* CONFIG_DRIVER_PS3 */
- #ifdef CONFIG_DRIVER_IPHONE
- extern struct wpa_driver_ops wpa_driver_iphone_ops; /* driver_iphone.m */
- #endif /* CONFIG_DRIVER_IPHONE */
-@@ -126,9 +123,6 @@ struct wpa_driver_ops *wpa_supplicant_drivers[] =
- #ifdef CONFIG_DRIVER_OSX
- 	&wpa_driver_osx_ops,
- #endif /* CONFIG_DRIVER_OSX */
--#ifdef CONFIG_DRIVER_PS3
--	&wpa_driver_ps3_ops,
--#endif /* CONFIG_DRIVER_PS3 */
- #ifdef CONFIG_DRIVER_IPHONE
- 	&wpa_driver_iphone_ops,
- #endif /* CONFIG_DRIVER_IPHONE */
-diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
-index 45d6ada..f131e92 100644
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -226,12 +226,6 @@ LDFLAGS += -framework CoreFoundation
- LDFLAGS += -F/System/Library/PrivateFrameworks -framework Apple80211
- endif
- 
--ifdef CONFIG_DRIVER_PS3
--CFLAGS += -DCONFIG_DRIVER_PS3 -m64
--OBJS_d += ../src/drivers/driver_ps3.o
--LDFLAGS += -m64
--endif
--
- ifdef CONFIG_DRIVER_IPHONE
- CFLAGS += -DCONFIG_DRIVER_IPHONE
- OBJS_d += ../src/drivers/driver_iphone.o
--- 
-1.6.2.4
-