refactor kernel code (part 1), mark it as broken now

SVN-Revision: 7916

1 files changed, 190 insertions, 0 deletions

diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c
new file mode 100644
index 0000000..fb844b7
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c
@@ -0,0 +1,190 @@
+/*
+ *  $Id$
+ *
+ *  Cellvision/SparkLAN boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static struct mtd_partition cas6xx_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 32*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 32*1024,
+	} , {
+		.name	= "nvfs1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64*1024,
+	} , {
+		.name	= "nvfs2",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition cas7xx_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 32*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 32*1024,
+	} , {
+		.name	= "nvfs",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 128*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *cas6xx_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static struct platform_device *cas7xx_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init cas6xx_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL);	/* for flash A20 line */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
+	adm5120_flash0_data.parts = cas6xx_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static void __init cas7xx_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL);	/* for flash A20 line */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
+	adm5120_flash0_data.parts = cas7xx_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static struct adm5120_board cas630_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS630,
+	.name		= "Cellvision CAS-630/630W",
+	.board_setup	= cas6xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas6xx_devices),
+	.devices	= cas6xx_devices,
+};
+
+static struct adm5120_board cas670_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS670,
+	.name		= "Cellvision CAS-670/670W",
+	.board_setup	= cas6xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas6xx_devices),
+	.devices	= cas6xx_devices,
+};
+
+static struct adm5120_board cas700_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS700,
+	.name		= "Cellvision CAS-700/700W",
+	.board_setup	= cas7xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas771_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS771,
+	.name		= "Cellvision CAS-771/771W",
+	.board_setup	= cas7xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas790_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS790,
+	.name		= "Cellvision CAS-790",
+	.board_setup	= cas7xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas861_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS861,
+	.name		= "Cellvision CAS-861/861W",
+	.board_setup	= cas7xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&cas630_board);
+	adm5120_board_register(&cas670_board);
+	adm5120_board_register(&cas700_board);
+	adm5120_board_register(&cas771_board);
+	adm5120_board_register(&cas790_board);
+	adm5120_board_register(&cas861_board);
+	return 0;
+}
+
+pure_initcall(register_boards);