diff options
| author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:11:21 +0800 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-07-30 14:02:40 +0200 |
| commit | 11a5128b983fdc78ffeac063bf9060116cad281b (patch) | |
| tree | 87e96f48eba513f0bd0eec74fb80f542961b0133 /target/linux/ar71xx/base-files | |
| parent | 21ad5fb1eafd33f82850c18d1df3b247fce17e0e (diff) | |
| download | mtk-20170518-11a5128b983fdc78ffeac063bf9060116cad281b.zip mtk-20170518-11a5128b983fdc78ffeac063bf9060116cad281b.tar.gz mtk-20170518-11a5128b983fdc78ffeac063bf9060116cad281b.tar.bz2 | |
ar71xx:add support for E750A v4
Qxwlan E750A v4 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 5G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
(cherry picked from commit ac03d51a3f4daa2f6a2a83f041dcd71674a9f724)
Diffstat (limited to 'target/linux/ar71xx/base-files')
4 files changed, 7 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 635c57e..3b986c3 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -66,7 +66,8 @@ cpe830|\ cpe870|\ dr531|\ e600g-v2|\ -e600gac-v2) +e600gac-v2|\ +e750a-v2) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index c3656f5..98d5898 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -26,6 +26,7 @@ get_status_led() { e1700ac-v2|\ e558-v2|\ e600gac-v2|\ + e750a-v4|\ eap120|\ minibox-v1|\ packet-squirrel|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 7be9a67..fb73288 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -684,6 +684,9 @@ ar71xx_board_detect() { *"E600GAC v2") name="e600gac-v2" ;; + *"E750A v4") + name="e750a-v4" + ;; *"EAP120") name="eap120" tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index f22e85e..f171aa6 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -253,6 +253,7 @@ platform_check_image() { e558-v2|\ e600g-v2|\ e600gac-v2|\ + e750a-v4|\ ebr-2310-c1|\ ens202ext|\ epg5000|\ |