summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2012-12-17 22:28:09 +0000
committerGabor Juhos <juhosg@openwrt.org>2012-12-17 22:28:09 +0000
commitfc0da6852e9b0586d6cd1ea79378824639b56e01 (patch)
tree8a36b55916665137eb580e0265282fb4f820e707 /target/linux/ar71xx
parentbf34eeaea4ad8079fdc188dd0b8ff834401a9b31 (diff)
downloadmtk-20170518-fc0da6852e9b0586d6cd1ea79378824639b56e01.zip
mtk-20170518-fc0da6852e9b0586d6cd1ea79378824639b56e01.tar.gz
mtk-20170518-fc0da6852e9b0586d6cd1ea79378824639b56e01.tar.bz2
ar71xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34743
Diffstat (limited to 'target/linux/ar71xx')
-rw-r--r--target/linux/ar71xx/config-3.3234
-rw-r--r--target/linux/ar71xx/patches-3.3/002-USB-use-generic-platform-driver-on-ath79.patch544
-rw-r--r--target/linux/ar71xx/patches-3.3/100-MIPS-ath79-separate-common-PCI-code.patch150
-rw-r--r--target/linux/ar71xx/patches-3.3/101-MIPS-ath79-rename-pci-ath724x.h.patch102
-rw-r--r--target/linux/ar71xx/patches-3.3/102-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch61
-rw-r--r--target/linux/ar71xx/patches-3.3/103-MIPS-ath79-add-a-common-PCI-registration-function.patch78
-rw-r--r--target/linux/ar71xx/patches-3.3/104-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch316
-rw-r--r--target/linux/ar71xx/patches-3.3/105-MIPS-ath79-replace-ath724x-to-ar724x.patch264
-rw-r--r--target/linux/ar71xx/patches-3.3/106-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch131
-rw-r--r--target/linux/ar71xx/patches-3.3/107-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch38
-rw-r--r--target/linux/ar71xx/patches-3.3/108-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch134
-rw-r--r--target/linux/ar71xx/patches-3.3/109-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch134
-rw-r--r--target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-a-wrong-IRQ-number.patch73
-rw-r--r--target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch213
-rw-r--r--target/linux/ar71xx/patches-3.3/112-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch64
-rw-r--r--target/linux/ar71xx/patches-3.3/113-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch141
-rw-r--r--target/linux/ar71xx/patches-3.3/114-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch436
-rw-r--r--target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch165
-rw-r--r--target/linux/ar71xx/patches-3.3/116-MIPS-ath79-remove-ar724x_pci_add_data-function.patch86
-rw-r--r--target/linux/ar71xx/patches-3.3/117-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch34
-rw-r--r--target/linux/ar71xx/patches-3.3/118-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch71
-rw-r--r--target/linux/ar71xx/patches-3.3/119-MIPS-ath79-add-early_printk-support-for-AR934X.patch56
-rw-r--r--target/linux/ar71xx/patches-3.3/120-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch58
-rw-r--r--target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch124
-rw-r--r--target/linux/ar71xx/patches-3.3/122-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch198
-rw-r--r--target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch102
-rw-r--r--target/linux/ar71xx/patches-3.3/124-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch158
-rw-r--r--target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch194
-rw-r--r--target/linux/ar71xx/patches-3.3/126-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch60
-rw-r--r--target/linux/ar71xx/patches-3.3/127-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch27
-rw-r--r--target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch116
-rw-r--r--target/linux/ar71xx/patches-3.3/129-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch66
-rw-r--r--target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch62
-rw-r--r--target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch196
-rw-r--r--target/linux/ar71xx/patches-3.3/132-MIPS-ath79-use-correct-IRQ-number-for-the-OHCI-contr.patch37
-rw-r--r--target/linux/ar71xx/patches-3.3/133-MIPS-ath79-use-a-helper-function-for-USB-resource-in.patch140
-rw-r--r--target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch78
-rw-r--r--target/linux/ar71xx/patches-3.3/135-MIPS-ath79-register-USB-host-controller-on-the-DB120.patch28
-rw-r--r--target/linux/ar71xx/patches-3.3/136-MIPS-ath79-use-correct-fractional-dividers-for-CPU-D.patch49
-rw-r--r--target/linux/ar71xx/patches-3.3/137-MIPS-ath79-fix-CPU-DDR-frequency-calculation-for-SRI.patch205
-rw-r--r--target/linux/ar71xx/patches-3.3/140-MIPS-pci-ar724x-avoid-data-bus-error-due-to-a-missin.patch78
-rw-r--r--target/linux/ar71xx/patches-3.3/141-MIPS-pci-ar724x-use-correct-value-for-AR724X_PCI_MEM.patch24
-rw-r--r--target/linux/ar71xx/patches-3.3/142-MIPS-pci-ar71xx-fix-AR71XX_PCI_MEM_SIZE.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/143-MIPS-pci-ar724x-convert-to-a-platform-driver.patch94
-rw-r--r--target/linux/ar71xx/patches-3.3/144-MIPS-pci-ar71xx-convert-to-a-platform-driver.patch104
-rw-r--r--target/linux/ar71xx/patches-3.3/145-MIPS-ath79-move-global-PCI-defines-into-a-common-hea.patch94
-rw-r--r--target/linux/ar71xx/patches-3.3/146-MIPS-ath79-register-platform-devices-for-the-PCI-con.patch119
-rw-r--r--target/linux/ar71xx/patches-3.3/147-MIPS-ath79-remove-unused-ar7-1x-24-x_pcibios_init-fu.patch147
-rw-r--r--target/linux/ar71xx/patches-3.3/148-MIPS-avoid-possible-resource-conflict-in-register_pc.patch35
-rw-r--r--target/linux/ar71xx/patches-3.3/149-MIPS-pci-ar724x-use-dynamically-allocated-PCI-contro.patch307
-rw-r--r--target/linux/ar71xx/patches-3.3/150-MIPS-pci-ar724x-remove-static-PCI-resources.patch131
-rw-r--r--target/linux/ar71xx/patches-3.3/151-MIPS-pci-ar724x-use-per-controller-IRQ-base.patch110
-rw-r--r--target/linux/ar71xx/patches-3.3/152-MIPS-pci-ar724x-setup-command-register-of-the-PCI-co.patch165
-rw-r--r--target/linux/ar71xx/patches-3.3/153-MIPS-pci-ar71xx-use-dynamically-allocated-PCI-contro.patch228
-rw-r--r--target/linux/ar71xx/patches-3.3/154-MIPS-pci-ar71xx-remove-static-PCI-controller-resourc.patch70
-rw-r--r--target/linux/ar71xx/patches-3.3/160-MIPS-ath79-add-early-printk-support-for-the-QCA955X-.patch31
-rw-r--r--target/linux/ar71xx/patches-3.3/161-MIPS-ath79-add-SoC-detection-code-for-the-QCA9558-So.patch91
-rw-r--r--target/linux/ar71xx/patches-3.3/162-MIPS-ath79-add-clock-setup-for-the-QCA955X-SoCs.patch167
-rw-r--r--target/linux/ar71xx/patches-3.3/163-MIPS-ath79-add-IRQ-handling-code-for-the-QCA955X-SoC.patch239
-rw-r--r--target/linux/ar71xx/patches-3.3/164-MIPS-ath79-add-GPIO-setup-code-for-the-QCA955X-SoCs.patch39
-rw-r--r--target/linux/ar71xx/patches-3.3/165-MIPS-ath79-add-QCA955X-specific-glue-to-ath79_device.patch31
-rw-r--r--target/linux/ar71xx/patches-3.3/166-MIPS-ath79-register-UART-for-the-QCA955X-SoCs.patch22
-rw-r--r--target/linux/ar71xx/patches-3.3/167-MIPS-ath79-add-USB-controller-registration-code-for-.patch93
-rw-r--r--target/linux/ar71xx/patches-3.3/168-MIPS-ath79-add-WMAC-registration-code-for-the-QCA955.patch70
-rw-r--r--target/linux/ar71xx/patches-3.3/169-MIPS-ath79-allow-to-specify-bus-number-in-PCI-IRQ-ma.patch34
-rw-r--r--target/linux/ar71xx/patches-3.3/170-MIPS-ath79-add-PCI-controller-registration-code-for-.patch103
-rw-r--r--target/linux/ar71xx/patches-3.3/171-MIPS-ath79-add-support-for-the-Qualcomm-Atheros-AP13.patch213
-rw-r--r--target/linux/ar71xx/patches-3.3/200-spi-ath79-add-delay-between-SCK-changes.patch122
-rw-r--r--target/linux/ar71xx/patches-3.3/201-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/202-spi-ath79-remove-superfluous-chip-select-code.patch30
-rw-r--r--target/linux/ar71xx/patches-3.3/203-spi-ath79-use-gpio_request_one.patch56
-rw-r--r--target/linux/ar71xx/patches-3.3/204-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch108
-rw-r--r--target/linux/ar71xx/patches-3.3/205-spi-ath79-add-shutdown-handler.patch45
-rw-r--r--target/linux/ar71xx/patches-3.3/206-spi-ath79-make-chipselect-logic-more-flexible.patch313
-rw-r--r--target/linux/ar71xx/patches-3.3/210-MIPS-ath79-simplify-misc-irq-handling.patch66
-rw-r--r--target/linux/ar71xx/patches-3.3/211-ar933x_uart-improve-serial-clock-calculation.patch181
-rw-r--r--target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-GPIO-function-selection-for-AR934x-So.patch106
-rw-r--r--target/linux/ar71xx/patches-3.3/310-lib-add-rle-decompression.patch114
-rw-r--r--target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch94
-rw-r--r--target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch29
-rw-r--r--target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch69
-rw-r--r--target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch25
-rw-r--r--target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch34
-rw-r--r--target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch112
-rw-r--r--target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch45
-rw-r--r--target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch61
-rw-r--r--target/linux/ar71xx/patches-3.3/412-mtd-m25p80-zero-partition-parser-data.patch10
-rw-r--r--target/linux/ar71xx/patches-3.3/413-mtd-ar934x-nand-driver.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch28
-rw-r--r--target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch11
-rw-r--r--target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch24
-rw-r--r--target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch12
-rw-r--r--target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch19
-rw-r--r--target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch25
-rw-r--r--target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch27
-rw-r--r--target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-3.3/460-spi-bitbang-export-spi_bitbang_bufs.patch28
-rw-r--r--target/linux/ar71xx/patches-3.3/461-spi-add-type-field-to-spi_transfer.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/462-mtd-m25p80-set-spi-transfer-type.patch15
-rw-r--r--target/linux/ar71xx/patches-3.3/463-spi-ath79-add-fast-flash-read.patch185
-rw-r--r--target/linux/ar71xx/patches-3.3/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch111
-rw-r--r--target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch22
-rw-r--r--target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch81
-rw-r--r--target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch37
-rw-r--r--target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch45
-rw-r--r--target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch47
-rw-r--r--target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch86
-rw-r--r--target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch58
-rw-r--r--target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch57
-rw-r--r--target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch11
-rw-r--r--target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch14
-rw-r--r--target/linux/ar71xx/patches-3.3/520-MIPS-ath79-enable-UART-function.patch18
-rw-r--r--target/linux/ar71xx/patches-3.3/521-MIPS-ath79-enable-UART-for-early_serial.patch61
-rw-r--r--target/linux/ar71xx/patches-3.3/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/523-MIPS-ath79-OTP-support.patch166
-rw-r--r--target/linux/ar71xx/patches-3.3/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch31
-rw-r--r--target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch302
-rw-r--r--target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch76
-rw-r--r--target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch163
-rw-r--r--target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch128
-rw-r--r--target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch209
-rw-r--r--target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch153
-rw-r--r--target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch109
-rw-r--r--target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch343
-rw-r--r--target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch184
-rw-r--r--target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch811
-rw-r--r--target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-support.patch39
-rw-r--r--target/linux/ar71xx/patches-3.3/612-MIPS-ath79-TL-WA7510N-v1-support.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/614-MIPS-ath79-MR600-support.patch39
-rw-r--r--target/linux/ar71xx/patches-3.3/615-MIPS-ath79-RB435G-support.patch10
-rw-r--r--target/linux/ar71xx/patches-3.3/616-MIPS-ath79-WNDR4300-support.patch40
-rw-r--r--target/linux/ar71xx/patches-3.3/630-MIPS-ath79-enable-dsp.patch10
-rw-r--r--target/linux/ar71xx/patches-3.3/650-MIPS-ath79-fix-ar933x-reset.patch31
-rw-r--r--target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch20
-rw-r--r--target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch117
-rw-r--r--target/linux/ar71xx/patches-3.3/a01-ag71xx-build_skb-compat.patch12
-rw-r--r--target/linux/ar71xx/patches-3.3/a02-ar934x_nfc-add-NO_AUTOINCR-flag.patch11
-rw-r--r--target/linux/ar71xx/patches-3.3/a03-rb4xx_nand-add-NO_AUTOINCR-flag.patch11
-rw-r--r--target/linux/ar71xx/patches-3.3/a04-rb750_nand-add-NO_AUTOINCR-flag.patch11
-rw-r--r--target/linux/ar71xx/patches-3.3/a05-ar934x_nfc-add-buffer-verification.patch29
-rw-r--r--target/linux/ar71xx/patches-3.3/a06-rb750_nand-add-buffer-verification.patch63
149 files changed, 0 insertions, 14362 deletions
diff --git a/target/linux/ar71xx/config-3.3 b/target/linux/ar71xx/config-3.3
deleted file mode 100644
index d1dd0b8..0000000
--- a/target/linux/ar71xx/config-3.3
+++ /dev/null
@@ -1,234 +0,0 @@
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATH79=y
-CONFIG_ATH79_DEV_AP9X_PCI=y
-CONFIG_ATH79_DEV_DSA=y
-CONFIG_ATH79_DEV_ETH=y
-CONFIG_ATH79_DEV_GPIO_BUTTONS=y
-CONFIG_ATH79_DEV_LEDS_GPIO=y
-CONFIG_ATH79_DEV_M25P80=y
-CONFIG_ATH79_DEV_NFC=y
-CONFIG_ATH79_DEV_SPI=y
-CONFIG_ATH79_DEV_USB=y
-CONFIG_ATH79_DEV_WMAC=y
-CONFIG_ATH79_MACH_ALFA_AP96=y
-CONFIG_ATH79_MACH_ALFA_NX=y
-CONFIG_ATH79_MACH_ALL0258N=y
-CONFIG_ATH79_MACH_ALL0315N=y
-CONFIG_ATH79_MACH_AP113=y
-CONFIG_ATH79_MACH_AP121=y
-CONFIG_ATH79_MACH_AP136=y
-CONFIG_ATH79_MACH_AP81=y
-CONFIG_ATH79_MACH_AP83=y
-CONFIG_ATH79_MACH_AP96=y
-CONFIG_ATH79_MACH_AW_NR580=y
-CONFIG_ATH79_MACH_CAP4200AG=y
-CONFIG_ATH79_MACH_DB120=y
-CONFIG_ATH79_MACH_DIR_600_A1=y
-CONFIG_ATH79_MACH_DIR_615_C1=y
-CONFIG_ATH79_MACH_DIR_825_B1=y
-CONFIG_ATH79_MACH_EAP7660D=y
-CONFIG_ATH79_MACH_EW_DORIN=y
-CONFIG_ATH79_MACH_HORNET_UB=y
-CONFIG_ATH79_MACH_JA76PF=y
-CONFIG_ATH79_MACH_JWAP003=y
-CONFIG_ATH79_MACH_MR600=y
-CONFIG_ATH79_MACH_MZK_W04NU=y
-CONFIG_ATH79_MACH_MZK_W300NH=y
-CONFIG_ATH79_MACH_NBG460N=y
-CONFIG_ATH79_MACH_OM2P=y
-CONFIG_ATH79_MACH_PB42=y
-CONFIG_ATH79_MACH_PB44=y
-CONFIG_ATH79_MACH_PB92=y
-CONFIG_ATH79_MACH_RB2011=y
-CONFIG_ATH79_MACH_RB4XX=y
-CONFIG_ATH79_MACH_RB750=y
-CONFIG_ATH79_MACH_RW2458N=y
-CONFIG_ATH79_MACH_TEW_632BRP=y
-CONFIG_ATH79_MACH_TEW_673GRU=y
-CONFIG_ATH79_MACH_TEW_712BR=y
-CONFIG_ATH79_MACH_TL_MR11U=y
-CONFIG_ATH79_MACH_TL_MR3020=y
-CONFIG_ATH79_MACH_TL_MR3X20=y
-CONFIG_ATH79_MACH_TL_WA901ND=y
-CONFIG_ATH79_MACH_TL_WA901ND_V2=y
-CONFIG_ATH79_MACH_TL_WDR4300=y
-CONFIG_ATH79_MACH_TL_WR1041N_V2=y
-CONFIG_ATH79_MACH_TL_WR1043ND=y
-CONFIG_ATH79_MACH_TL_WR2543N=y
-CONFIG_ATH79_MACH_TL_WR703N=y
-CONFIG_ATH79_MACH_TL_WR741ND=y
-CONFIG_ATH79_MACH_TL_WR741ND_V4=y
-CONFIG_ATH79_MACH_TL_WR841N_V1=y
-CONFIG_ATH79_MACH_TL_WR841N_V8=y
-CONFIG_ATH79_MACH_TL_WR941ND=y
-CONFIG_ATH79_MACH_UBNT=y
-CONFIG_ATH79_MACH_UBNT_XM=y
-CONFIG_ATH79_MACH_WHR_HP_G300N=y
-CONFIG_ATH79_MACH_WLAE_AG300N=y
-CONFIG_ATH79_MACH_WNDR3700=y
-CONFIG_ATH79_MACH_WNDR4300=y
-CONFIG_ATH79_MACH_WNR2000=y
-CONFIG_ATH79_MACH_WP543=y
-CONFIG_ATH79_MACH_WPE72=y
-CONFIG_ATH79_MACH_WRT160NL=y
-CONFIG_ATH79_MACH_WRT400N=y
-CONFIG_ATH79_MACH_WZR_HP_AG300H=y
-CONFIG_ATH79_MACH_WZR_HP_G300NH=y
-CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
-CONFIG_ATH79_MACH_WZR_HP_G450H=y
-CONFIG_ATH79_MACH_ZCN_1523H=y
-CONFIG_ATH79_NVRAM=y
-CONFIG_ATH79_PCI_ATH9K_FIXUP=y
-CONFIG_ATH79_ROUTERBOOT=y
-# CONFIG_ATH79_WDT is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_LEDS_RB750 is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_WNDR3700_USB is not set
-# CONFIG_M25PXX_USE_FAST_READ is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_TPLINK_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RLE_DECOMPRESS=y
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_AR71XX=y
-CONFIG_SOC_AR724X=y
-CONFIG_SOC_AR913X=y
-CONFIG_SOC_AR933X=y
-CONFIG_SOC_AR934X=y
-CONFIG_SOC_QCA955X=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_RB4XX is not set
-# CONFIG_SPI_RB4XX_CPLD is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ar71xx/patches-3.3/002-USB-use-generic-platform-driver-on-ath79.patch b/target/linux/ar71xx/patches-3.3/002-USB-use-generic-platform-driver-on-ath79.patch
deleted file mode 100644
index d3a3b71..0000000
--- a/target/linux/ar71xx/patches-3.3/002-USB-use-generic-platform-driver-on-ath79.patch
+++ /dev/null
@@ -1,544 +0,0 @@
-From dbcbcdd001c5943adbb18db3b8f0dafc405559eb Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 13 Mar 2012 01:04:53 +0100
-Subject: [PATCH 03/47] USB: use generic platform driver on ath79
-
-The ath79 usb driver doesn't do anything special and is now converted
-to the generic ehci and ohci driver.
-This was tested on a TP-Link TL-WR1043ND (AR9132)
-
-Acked-by: Gabor Juhos <juhosg@openwrt.org>
-CC: Imre Kaloz <kaloz@openwrt.org>
-CC: linux-mips@linux-mips.org
-CC: Ralf Baechle <ralf@linux-mips.org>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- arch/mips/ath79/dev-usb.c | 31 +++++-
- drivers/usb/host/Kconfig | 12 ++-
- drivers/usb/host/ehci-ath79.c | 208 -----------------------------------------
- drivers/usb/host/ehci-hcd.c | 5 -
- drivers/usb/host/ohci-ath79.c | 151 -----------------------------
- drivers/usb/host/ohci-hcd.c | 5 -
- 6 files changed, 35 insertions(+), 377 deletions(-)
- delete mode 100644 drivers/usb/host/ehci-ath79.c
- delete mode 100644 drivers/usb/host/ohci-ath79.c
-
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -17,6 +17,8 @@
- #include <linux/irq.h>
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/usb/ohci_pdriver.h>
-
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-@@ -36,14 +38,19 @@ static struct resource ath79_ohci_resour
- };
-
- static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct usb_ohci_pdata ath79_ohci_pdata = {
-+};
-+
- static struct platform_device ath79_ohci_device = {
-- .name = "ath79-ohci",
-+ .name = "ohci-platform",
- .id = -1,
- .resource = ath79_ohci_resources,
- .num_resources = ARRAY_SIZE(ath79_ohci_resources),
- .dev = {
- .dma_mask = &ath79_ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &ath79_ohci_pdata,
- },
- };
-
-@@ -60,8 +67,20 @@ static struct resource ath79_ehci_resour
- };
-
- static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
-+ .has_synopsys_hc_bug = 1,
-+ .port_power_off = 1,
-+};
-+
-+static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
-+ .caps_offset = 0x100,
-+ .has_tt = 1,
-+ .port_power_off = 1,
-+};
-+
- static struct platform_device ath79_ehci_device = {
-- .name = "ath79-ehci",
-+ .name = "ehci-platform",
- .id = -1,
- .resource = ath79_ehci_resources,
- .num_resources = ARRAY_SIZE(ath79_ehci_resources),
-@@ -101,7 +120,7 @@ static void __init ath79_usb_setup(void)
-
- ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
- ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
-- ath79_ehci_device.name = "ar71xx-ehci";
-+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1;
- platform_device_register(&ath79_ehci_device);
- }
-
-@@ -142,7 +161,7 @@ static void __init ar724x_usb_setup(void
-
- ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
- ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
-- ath79_ehci_device.name = "ar724x-ehci";
-+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
- platform_device_register(&ath79_ehci_device);
- }
-
-@@ -159,7 +178,7 @@ static void __init ar913x_usb_setup(void
-
- ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
- ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
-- ath79_ehci_device.name = "ar913x-ehci";
-+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
- platform_device_register(&ath79_ehci_device);
- }
-
-@@ -176,7 +195,7 @@ static void __init ar933x_usb_setup(void
-
- ath79_ehci_resources[0].start = AR933X_EHCI_BASE;
- ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1;
-- ath79_ehci_device.name = "ar933x-ehci";
-+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
- platform_device_register(&ath79_ehci_device);
- }
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -218,11 +218,15 @@ config USB_CNS3XXX_EHCI
- support.
-
- config USB_EHCI_ATH79
-- bool "EHCI support for AR7XXX/AR9XXX SoCs"
-+ bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
- depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
- select USB_EHCI_ROOT_HUB_TT
-+ select USB_EHCI_HCD_PLATFORM
- default y
- ---help---
-+ This option is deprecated now and the driver was removed, use
-+ USB_EHCI_HCD_PLATFORM instead.
-+
- Enables support for the built-in EHCI controller present
- on the Atheros AR7XXX/AR9XXX SoCs.
-
-@@ -312,10 +316,14 @@ config USB_OHCI_HCD_OMAP3
- OMAP3 and later chips.
-
- config USB_OHCI_ATH79
-- bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs"
-+ bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
- depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X)
-+ select USB_OHCI_HCD_PLATFORM
- default y
- help
-+ This option is deprecated now and the driver was removed, use
-+ USB_OHCI_HCD_PLATFORM instead.
-+
- Enables support for the built-in OHCI controller present on the
- Atheros AR71XX/AR7240 SoCs.
-
---- a/drivers/usb/host/ehci-ath79.c
-+++ /dev/null
-@@ -1,208 +0,0 @@
--/*
-- * Bus Glue for Atheros AR7XXX/AR9XXX built-in EHCI controller.
-- *
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-- * Copyright (C) 2007 Atheros Communications, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/platform_device.h>
--
--enum {
-- EHCI_ATH79_IP_V1 = 0,
-- EHCI_ATH79_IP_V2,
--};
--
--static const struct platform_device_id ehci_ath79_id_table[] = {
-- {
-- .name = "ar71xx-ehci",
-- .driver_data = EHCI_ATH79_IP_V1,
-- },
-- {
-- .name = "ar724x-ehci",
-- .driver_data = EHCI_ATH79_IP_V2,
-- },
-- {
-- .name = "ar913x-ehci",
-- .driver_data = EHCI_ATH79_IP_V2,
-- },
-- {
-- .name = "ar933x-ehci",
-- .driver_data = EHCI_ATH79_IP_V2,
-- },
-- {
-- /* terminating entry */
-- },
--};
--
--MODULE_DEVICE_TABLE(platform, ehci_ath79_id_table);
--
--static int ehci_ath79_init(struct usb_hcd *hcd)
--{
-- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-- struct platform_device *pdev = to_platform_device(hcd->self.controller);
-- const struct platform_device_id *id;
-- int ret;
--
-- id = platform_get_device_id(pdev);
-- if (!id) {
-- dev_err(hcd->self.controller, "missing device id\n");
-- return -EINVAL;
-- }
--
-- switch (id->driver_data) {
-- case EHCI_ATH79_IP_V1:
-- ehci->has_synopsys_hc_bug = 1;
--
-- ehci->caps = hcd->regs;
-- ehci->regs = hcd->regs +
-- HC_LENGTH(ehci,
-- ehci_readl(ehci, &ehci->caps->hc_capbase));
-- break;
--
-- case EHCI_ATH79_IP_V2:
-- hcd->has_tt = 1;
--
-- ehci->caps = hcd->regs + 0x100;
-- ehci->regs = hcd->regs + 0x100 +
-- HC_LENGTH(ehci,
-- ehci_readl(ehci, &ehci->caps->hc_capbase));
-- break;
--
-- default:
-- BUG();
-- }
--
-- dbg_hcs_params(ehci, "reset");
-- dbg_hcc_params(ehci, "reset");
-- ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-- ehci->sbrn = 0x20;
--
-- ehci_reset(ehci);
--
-- ret = ehci_init(hcd);
-- if (ret)
-- return ret;
--
-- ehci_port_power(ehci, 0);
--
-- return 0;
--}
--
--static const struct hc_driver ehci_ath79_hc_driver = {
-- .description = hcd_name,
-- .product_desc = "Atheros built-in EHCI controller",
-- .hcd_priv_size = sizeof(struct ehci_hcd),
-- .irq = ehci_irq,
-- .flags = HCD_MEMORY | HCD_USB2,
--
-- .reset = ehci_ath79_init,
-- .start = ehci_run,
-- .stop = ehci_stop,
-- .shutdown = ehci_shutdown,
--
-- .urb_enqueue = ehci_urb_enqueue,
-- .urb_dequeue = ehci_urb_dequeue,
-- .endpoint_disable = ehci_endpoint_disable,
-- .endpoint_reset = ehci_endpoint_reset,
--
-- .get_frame_number = ehci_get_frame,
--
-- .hub_status_data = ehci_hub_status_data,
-- .hub_control = ehci_hub_control,
--
-- .relinquish_port = ehci_relinquish_port,
-- .port_handed_over = ehci_port_handed_over,
--
-- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
--};
--
--static int ehci_ath79_probe(struct platform_device *pdev)
--{
-- struct usb_hcd *hcd;
-- struct resource *res;
-- int irq;
-- int ret;
--
-- if (usb_disabled())
-- return -ENODEV;
--
-- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-- if (!res) {
-- dev_dbg(&pdev->dev, "no IRQ specified\n");
-- return -ENODEV;
-- }
-- irq = res->start;
--
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!res) {
-- dev_dbg(&pdev->dev, "no base address specified\n");
-- return -ENODEV;
-- }
--
-- hcd = usb_create_hcd(&ehci_ath79_hc_driver, &pdev->dev,
-- dev_name(&pdev->dev));
-- if (!hcd)
-- return -ENOMEM;
--
-- hcd->rsrc_start = res->start;
-- hcd->rsrc_len = resource_size(res);
--
-- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-- dev_dbg(&pdev->dev, "controller already in use\n");
-- ret = -EBUSY;
-- goto err_put_hcd;
-- }
--
-- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-- if (!hcd->regs) {
-- dev_dbg(&pdev->dev, "error mapping memory\n");
-- ret = -EFAULT;
-- goto err_release_region;
-- }
--
-- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
-- if (ret)
-- goto err_iounmap;
--
-- return 0;
--
--err_iounmap:
-- iounmap(hcd->regs);
--
--err_release_region:
-- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
--err_put_hcd:
-- usb_put_hcd(hcd);
-- return ret;
--}
--
--static int ehci_ath79_remove(struct platform_device *pdev)
--{
-- struct usb_hcd *hcd = platform_get_drvdata(pdev);
--
-- usb_remove_hcd(hcd);
-- iounmap(hcd->regs);
-- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-- usb_put_hcd(hcd);
--
-- return 0;
--}
--
--static struct platform_driver ehci_ath79_driver = {
-- .probe = ehci_ath79_probe,
-- .remove = ehci_ath79_remove,
-- .id_table = ehci_ath79_id_table,
-- .driver = {
-- .owner = THIS_MODULE,
-- .name = "ath79-ehci",
-- }
--};
--
--MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ehci");
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1356,11 +1356,6 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER s5p_ehci_driver
- #endif
-
--#ifdef CONFIG_USB_EHCI_ATH79
--#include "ehci-ath79.c"
--#define PLATFORM_DRIVER ehci_ath79_driver
--#endif
--
- #ifdef CONFIG_SPARC_LEON
- #include "ehci-grlib.c"
- #define PLATFORM_DRIVER ehci_grlib_driver
---- a/drivers/usb/host/ohci-ath79.c
-+++ /dev/null
-@@ -1,151 +0,0 @@
--/*
-- * OHCI HCD (Host Controller Driver) for USB.
-- *
-- * Bus Glue for Atheros AR71XX/AR724X built-in OHCI controller.
-- *
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-- * Copyright (C) 2007 Atheros Communications, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/platform_device.h>
--
--static int __devinit ohci_ath79_start(struct usb_hcd *hcd)
--{
-- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-- int ret;
--
-- ret = ohci_init(ohci);
-- if (ret < 0)
-- return ret;
--
-- ret = ohci_run(ohci);
-- if (ret < 0)
-- goto err;
--
-- return 0;
--
--err:
-- ohci_stop(hcd);
-- return ret;
--}
--
--static const struct hc_driver ohci_ath79_hc_driver = {
-- .description = hcd_name,
-- .product_desc = "Atheros built-in OHCI controller",
-- .hcd_priv_size = sizeof(struct ohci_hcd),
--
-- .irq = ohci_irq,
-- .flags = HCD_USB11 | HCD_MEMORY,
--
-- .start = ohci_ath79_start,
-- .stop = ohci_stop,
-- .shutdown = ohci_shutdown,
--
-- .urb_enqueue = ohci_urb_enqueue,
-- .urb_dequeue = ohci_urb_dequeue,
-- .endpoint_disable = ohci_endpoint_disable,
--
-- /*
-- * scheduling support
-- */
-- .get_frame_number = ohci_get_frame,
--
-- /*
-- * root hub support
-- */
-- .hub_status_data = ohci_hub_status_data,
-- .hub_control = ohci_hub_control,
-- .start_port_reset = ohci_start_port_reset,
--};
--
--static int ohci_ath79_probe(struct platform_device *pdev)
--{
-- struct usb_hcd *hcd;
-- struct resource *res;
-- int irq;
-- int ret;
--
-- if (usb_disabled())
-- return -ENODEV;
--
-- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-- if (!res) {
-- dev_dbg(&pdev->dev, "no IRQ specified\n");
-- return -ENODEV;
-- }
-- irq = res->start;
--
-- hcd = usb_create_hcd(&ohci_ath79_hc_driver, &pdev->dev,
-- dev_name(&pdev->dev));
-- if (!hcd)
-- return -ENOMEM;
--
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!res) {
-- dev_dbg(&pdev->dev, "no base address specified\n");
-- ret = -ENODEV;
-- goto err_put_hcd;
-- }
-- hcd->rsrc_start = res->start;
-- hcd->rsrc_len = resource_size(res);
--
-- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-- dev_dbg(&pdev->dev, "controller already in use\n");
-- ret = -EBUSY;
-- goto err_put_hcd;
-- }
--
-- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-- if (!hcd->regs) {
-- dev_dbg(&pdev->dev, "error mapping memory\n");
-- ret = -EFAULT;
-- goto err_release_region;
-- }
--
-- ohci_hcd_init(hcd_to_ohci(hcd));
--
-- ret = usb_add_hcd(hcd, irq, 0);
-- if (ret)
-- goto err_stop_hcd;
--
-- return 0;
--
--err_stop_hcd:
-- iounmap(hcd->regs);
--err_release_region:
-- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
--err_put_hcd:
-- usb_put_hcd(hcd);
-- return ret;
--}
--
--static int ohci_ath79_remove(struct platform_device *pdev)
--{
-- struct usb_hcd *hcd = platform_get_drvdata(pdev);
--
-- usb_remove_hcd(hcd);
-- iounmap(hcd->regs);
-- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-- usb_put_hcd(hcd);
--
-- return 0;
--}
--
--static struct platform_driver ohci_hcd_ath79_driver = {
-- .probe = ohci_ath79_probe,
-- .remove = ohci_ath79_remove,
-- .shutdown = usb_hcd_platform_shutdown,
-- .driver = {
-- .name = "ath79-ohci",
-- .owner = THIS_MODULE,
-- },
--};
--
--MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ohci");
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1111,11 +1111,6 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
- #endif
-
--#ifdef CONFIG_USB_OHCI_ATH79
--#include "ohci-ath79.c"
--#define PLATFORM_DRIVER ohci_hcd_ath79_driver
--#endif
--
- #ifdef CONFIG_CPU_XLR
- #include "ohci-xls.c"
- #define PLATFORM_DRIVER ohci_xls_driver
diff --git a/target/linux/ar71xx/patches-3.3/100-MIPS-ath79-separate-common-PCI-code.patch b/target/linux/ar71xx/patches-3.3/100-MIPS-ath79-separate-common-PCI-code.patch
deleted file mode 100644
index 6062c89..0000000
--- a/target/linux/ar71xx/patches-3.3/100-MIPS-ath79-separate-common-PCI-code.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 9d9c0d49315520754660c8df3f42d93ecf7dba7a Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:29:21 +0100
-Subject: [PATCH 05/47] MIPS: ath79: separate common PCI code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The 'pcibios_map_irq' and 'pcibios_plat_dev_init'
-are common functions and only instance one of them
-can be present in a single kernel.
-
-Currently these functions can be built only if the
-CONFIG_SOC_AR724X option is selected. However the
-ath79 platform contain support for the AR71XX SoCs,.
-The AR71XX SoCs have a differnet PCI controller,
-and those will require a different code.
-
-Move the common PCI code into a separeate file in
-order to be able to use that with other SoCs as
-well.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: René Bolldorf <xsecute@googlemail.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3485/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/Makefile | 1 +
- arch/mips/ath79/pci.c | 46 +++++++++++++++++++++++++++++++++++++++++++
- arch/mips/pci/pci-ath724x.c | 34 -------------------------------
- 3 files changed, 47 insertions(+), 34 deletions(-)
- create mode 100644 arch/mips/ath79/pci.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,6 +11,7 @@
- obj-y := prom.o setup.o irq.o common.o clock.o gpio.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+obj-$(CONFIG_PCI) += pci.o
-
- #
- # Devices
---- /dev/null
-+++ b/arch/mips/ath79/pci.c
-@@ -0,0 +1,46 @@
-+/*
-+ * Atheros AR71XX/AR724X specific PCI setup code
-+ *
-+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <asm/mach-ath79/pci-ath724x.h>
-+
-+static struct ath724x_pci_data *pci_data;
-+static int pci_data_size;
-+
-+void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
-+{
-+ pci_data = data;
-+ pci_data_size = size;
-+}
-+
-+int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
-+{
-+ unsigned int devfn = dev->devfn;
-+ int irq = -1;
-+
-+ if (devfn > pci_data_size - 1)
-+ return irq;
-+
-+ irq = pci_data[devfn].irq;
-+
-+ return irq;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ unsigned int devfn = dev->devfn;
-+
-+ if (devfn > pci_data_size - 1)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ dev->dev.platform_data = pci_data[devfn].pdata;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
---- a/arch/mips/pci/pci-ath724x.c
-+++ b/arch/mips/pci/pci-ath724x.c
-@@ -9,7 +9,6 @@
- */
-
- #include <linux/pci.h>
--#include <asm/mach-ath79/pci-ath724x.h>
-
- #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
- #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
-@@ -19,8 +18,6 @@
- #define ATH724X_PCI_MEM_SIZE 0x08000000
-
- static DEFINE_SPINLOCK(ath724x_pci_lock);
--static struct ath724x_pci_data *pci_data;
--static int pci_data_size;
-
- static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
-@@ -133,37 +130,6 @@ static struct pci_controller ath724x_pci
- .mem_resource = &ath724x_mem_resource,
- };
-
--void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
--{
-- pci_data = data;
-- pci_data_size = size;
--}
--
--int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
--{
-- unsigned int devfn = dev->devfn;
-- int irq = -1;
--
-- if (devfn > pci_data_size - 1)
-- return irq;
--
-- irq = pci_data[devfn].irq;
--
-- return irq;
--}
--
--int pcibios_plat_dev_init(struct pci_dev *dev)
--{
-- unsigned int devfn = dev->devfn;
--
-- if (devfn > pci_data_size - 1)
-- return PCIBIOS_DEVICE_NOT_FOUND;
--
-- dev->dev.platform_data = pci_data[devfn].pdata;
--
-- return PCIBIOS_SUCCESSFUL;
--}
--
- static int __init ath724x_pcibios_init(void)
- {
- register_pci_controller(&ath724x_pci_controller);
diff --git a/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-rename-pci-ath724x.h.patch b/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-rename-pci-ath724x.h.patch
deleted file mode 100644
index f28f20c..0000000
--- a/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-rename-pci-ath724x.h.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 293dcf4142717d8059540bd69d1517c442617569 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:29:22 +0100
-Subject: [PATCH 06/47] MIPS: ath79: rename pci-ath724x.h
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The declared function in this header file is used by the
-ath79 platform code only. Move the header to the platform
-directory.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: René Bolldorf <xsecute@googlemail.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3486/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/mach-ubnt-xm.c | 2 +-
- arch/mips/ath79/pci.c | 2 +-
- arch/mips/ath79/pci.h | 21 +++++++++++++++++++++
- arch/mips/include/asm/mach-ath79/pci-ath724x.h | 21 ---------------------
- 4 files changed, 23 insertions(+), 23 deletions(-)
- create mode 100644 arch/mips/ath79/pci.h
- delete mode 100644 arch/mips/include/asm/mach-ath79/pci-ath724x.h
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -15,13 +15,13 @@
-
- #ifdef CONFIG_PCI
- #include <linux/ath9k_platform.h>
--#include <asm/mach-ath79/pci-ath724x.h>
- #endif /* CONFIG_PCI */
-
- #include "machtypes.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-spi.h"
-+#include "pci.h"
-
- #define UBNT_XM_GPIO_LED_L1 0
- #define UBNT_XM_GPIO_LED_L2 1
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -9,7 +9,7 @@
- */
-
- #include <linux/pci.h>
--#include <asm/mach-ath79/pci-ath724x.h>
-+#include "pci.h"
-
- static struct ath724x_pci_data *pci_data;
- static int pci_data_size;
---- /dev/null
-+++ b/arch/mips/ath79/pci.h
-@@ -0,0 +1,21 @@
-+/*
-+ * Atheros 724x PCI support
-+ *
-+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
-+#define __ASM_MACH_ATH79_PCI_ATH724X_H
-+
-+struct ath724x_pci_data {
-+ int irq;
-+ void *pdata;
-+};
-+
-+void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
-+
-+#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
---- a/arch/mips/include/asm/mach-ath79/pci-ath724x.h
-+++ /dev/null
-@@ -1,21 +0,0 @@
--/*
-- * Atheros 724x PCI support
-- *
-- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
--#define __ASM_MACH_ATH79_PCI_ATH724X_H
--
--struct ath724x_pci_data {
-- int irq;
-- void *pdata;
--};
--
--void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
--
--#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
diff --git a/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch b/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch
deleted file mode 100644
index 9696a75..0000000
--- a/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From a9e38566ebe755219db10fa155fa8f0f4efc20d9 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:29:23 +0100
-Subject: [PATCH 07/47] MIPS: ath79: make ath724x_pcibios_init visible for external code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: René Bolldorf <xsecute@googlemail.com>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3487/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/include/asm/mach-ath79/pci.h | 20 ++++++++++++++++++++
- arch/mips/pci/pci-ath724x.c | 3 ++-
- 2 files changed, 22 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/include/asm/mach-ath79/pci.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/pci.h
-@@ -0,0 +1,20 @@
-+/*
-+ * Atheros 724x PCI support
-+ *
-+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_PCI_H
-+#define __ASM_MACH_ATH79_PCI_H
-+
-+#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
-+int ath724x_pcibios_init(void);
-+#else
-+static inline int ath724x_pcibios_init(void) { return 0; }
-+#endif
-+
-+#endif /* __ASM_MACH_ATH79_PCI_H */
---- a/arch/mips/pci/pci-ath724x.c
-+++ b/arch/mips/pci/pci-ath724x.c
-@@ -9,6 +9,7 @@
- */
-
- #include <linux/pci.h>
-+#include <asm/mach-ath79/pci.h>
-
- #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
- #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
-@@ -130,7 +131,7 @@ static struct pci_controller ath724x_pci
- .mem_resource = &ath724x_mem_resource,
- };
-
--static int __init ath724x_pcibios_init(void)
-+int __init ath724x_pcibios_init(void)
- {
- register_pci_controller(&ath724x_pci_controller);
-
diff --git a/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-add-a-common-PCI-registration-function.patch b/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-add-a-common-PCI-registration-function.patch
deleted file mode 100644
index 34587b6..0000000
--- a/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-add-a-common-PCI-registration-function.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From e3edaac2e967f07ae3b726e64e1c290233361bc7 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:29:24 +0100
-Subject: [PATCH 08/47] MIPS: ath79: add a common PCI registration function
-
-The current code unconditionally registers the AR724X
-specific PCI controller, even if the kernel is running
-on a different SoC.
-
-Add a common function for PCI controller registration,
-and only register the AR724X PCI controller if the kernel
-is running on an AR724X SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3488/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/mach-ubnt-xm.c | 1 +
- arch/mips/ath79/pci.c | 10 ++++++++++
- arch/mips/ath79/pci.h | 6 ++++++
- arch/mips/pci/pci-ath724x.c | 2 --
- 4 files changed, 17 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -111,6 +111,7 @@ static void __init ubnt_xm_init(void)
- ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
- #endif /* CONFIG_PCI */
-
-+ ath79_register_pci();
- }
-
- MIPS_MACHINE(ATH79_MACH_UBNT_XM,
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -9,6 +9,8 @@
- */
-
- #include <linux/pci.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/pci.h>
- #include "pci.h"
-
- static struct ath724x_pci_data *pci_data;
-@@ -44,3 +46,11 @@ int pcibios_plat_dev_init(struct pci_dev
-
- return PCIBIOS_SUCCESSFUL;
- }
-+
-+int __init ath79_register_pci(void)
-+{
-+ if (soc_is_ar724x())
-+ return ath724x_pcibios_init();
-+
-+ return -ENODEV;
-+}
---- a/arch/mips/ath79/pci.h
-+++ b/arch/mips/ath79/pci.h
-@@ -18,4 +18,10 @@ struct ath724x_pci_data {
-
- void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
-
-+#ifdef CONFIG_PCI
-+int ath79_register_pci(void);
-+#else
-+static inline int ath79_register_pci(void) { return 0; }
-+#endif
-+
- #endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
---- a/arch/mips/pci/pci-ath724x.c
-+++ b/arch/mips/pci/pci-ath724x.c
-@@ -137,5 +137,3 @@ int __init ath724x_pcibios_init(void)
-
- return PCIBIOS_SUCCESSFUL;
- }
--
--arch_initcall(ath724x_pcibios_init);
diff --git a/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch b/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch
deleted file mode 100644
index e718928..0000000
--- a/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch
+++ /dev/null
@@ -1,316 +0,0 @@
-From 36dfdaa097ee1b12139187dc89cfa23fbb92b53b Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:29:25 +0100
-Subject: [PATCH 09/47] MIPS: ath79: rename pci-ath724x.c to make it reflect the real SoC name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: René Bolldorf <xsecute@googlemail.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3489/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/pci/Makefile | 2 +-
- arch/mips/pci/pci-ar724x.c | 139 +++++++++++++++++++++++++++++++++++++++++++
- arch/mips/pci/pci-ath724x.c | 139 -------------------------------------------
- 3 files changed, 140 insertions(+), 140 deletions(-)
- create mode 100644 arch/mips/pci/pci-ar724x.c
- delete mode 100644 arch/mips/pci/pci-ath724x.c
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -19,7 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
- ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
--obj-$(CONFIG_SOC_AR724X) += pci-ath724x.o
-+obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
---- /dev/null
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -0,0 +1,139 @@
-+/*
-+ * Atheros 724x PCI support
-+ *
-+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <asm/mach-ath79/pci.h>
-+
-+#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
-+#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
-+
-+#define ATH724X_PCI_DEV_BASE 0x14000000
-+#define ATH724X_PCI_MEM_BASE 0x10000000
-+#define ATH724X_PCI_MEM_SIZE 0x08000000
-+
-+static DEFINE_SPINLOCK(ath724x_pci_lock);
-+
-+static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-+ int size, uint32_t *value)
-+{
-+ unsigned long flags, addr, tval, mask;
-+
-+ if (devfn)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ if (where & (size - 1))
-+ return PCIBIOS_BAD_REGISTER_NUMBER;
-+
-+ spin_lock_irqsave(&ath724x_pci_lock, flags);
-+
-+ switch (size) {
-+ case 1:
-+ addr = where & ~3;
-+ mask = 0xff000000 >> ((where % 4) * 8);
-+ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
-+ tval = tval & ~mask;
-+ *value = (tval >> ((4 - (where % 4))*8));
-+ break;
-+ case 2:
-+ addr = where & ~3;
-+ mask = 0xffff0000 >> ((where % 4)*8);
-+ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
-+ tval = tval & ~mask;
-+ *value = (tval >> ((4 - (where % 4))*8));
-+ break;
-+ case 4:
-+ *value = reg_read(ATH724X_PCI_DEV_BASE + where);
-+ break;
-+ default:
-+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-+
-+ return PCIBIOS_BAD_REGISTER_NUMBER;
-+ }
-+
-+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-+ int size, uint32_t value)
-+{
-+ unsigned long flags, tval, addr, mask;
-+
-+ if (devfn)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ if (where & (size - 1))
-+ return PCIBIOS_BAD_REGISTER_NUMBER;
-+
-+ spin_lock_irqsave(&ath724x_pci_lock, flags);
-+
-+ switch (size) {
-+ case 1:
-+ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
-+ mask = 0xff000000 >> ((where % 4)*8);
-+ tval = reg_read(addr);
-+ tval = tval & ~mask;
-+ tval |= (value << ((4 - (where % 4))*8)) & mask;
-+ reg_write(addr, tval);
-+ break;
-+ case 2:
-+ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
-+ mask = 0xffff0000 >> ((where % 4)*8);
-+ tval = reg_read(addr);
-+ tval = tval & ~mask;
-+ tval |= (value << ((4 - (where % 4))*8)) & mask;
-+ reg_write(addr, tval);
-+ break;
-+ case 4:
-+ reg_write((ATH724X_PCI_DEV_BASE + where), value);
-+ break;
-+ default:
-+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-+
-+ return PCIBIOS_BAD_REGISTER_NUMBER;
-+ }
-+
-+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops ath724x_pci_ops = {
-+ .read = ath724x_pci_read,
-+ .write = ath724x_pci_write,
-+};
-+
-+static struct resource ath724x_io_resource = {
-+ .name = "PCI IO space",
-+ .start = 0,
-+ .end = 0,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct resource ath724x_mem_resource = {
-+ .name = "PCI memory space",
-+ .start = ATH724X_PCI_MEM_BASE,
-+ .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct pci_controller ath724x_pci_controller = {
-+ .pci_ops = &ath724x_pci_ops,
-+ .io_resource = &ath724x_io_resource,
-+ .mem_resource = &ath724x_mem_resource,
-+};
-+
-+int __init ath724x_pcibios_init(void)
-+{
-+ register_pci_controller(&ath724x_pci_controller);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
---- a/arch/mips/pci/pci-ath724x.c
-+++ /dev/null
-@@ -1,139 +0,0 @@
--/*
-- * Atheros 724x PCI support
-- *
-- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/pci.h>
--#include <asm/mach-ath79/pci.h>
--
--#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
--#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
--
--#define ATH724X_PCI_DEV_BASE 0x14000000
--#define ATH724X_PCI_MEM_BASE 0x10000000
--#define ATH724X_PCI_MEM_SIZE 0x08000000
--
--static DEFINE_SPINLOCK(ath724x_pci_lock);
--
--static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-- int size, uint32_t *value)
--{
-- unsigned long flags, addr, tval, mask;
--
-- if (devfn)
-- return PCIBIOS_DEVICE_NOT_FOUND;
--
-- if (where & (size - 1))
-- return PCIBIOS_BAD_REGISTER_NUMBER;
--
-- spin_lock_irqsave(&ath724x_pci_lock, flags);
--
-- switch (size) {
-- case 1:
-- addr = where & ~3;
-- mask = 0xff000000 >> ((where % 4) * 8);
-- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
-- tval = tval & ~mask;
-- *value = (tval >> ((4 - (where % 4))*8));
-- break;
-- case 2:
-- addr = where & ~3;
-- mask = 0xffff0000 >> ((where % 4)*8);
-- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
-- tval = tval & ~mask;
-- *value = (tval >> ((4 - (where % 4))*8));
-- break;
-- case 4:
-- *value = reg_read(ATH724X_PCI_DEV_BASE + where);
-- break;
-- default:
-- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
--
-- return PCIBIOS_BAD_REGISTER_NUMBER;
-- }
--
-- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
--
-- return PCIBIOS_SUCCESSFUL;
--}
--
--static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-- int size, uint32_t value)
--{
-- unsigned long flags, tval, addr, mask;
--
-- if (devfn)
-- return PCIBIOS_DEVICE_NOT_FOUND;
--
-- if (where & (size - 1))
-- return PCIBIOS_BAD_REGISTER_NUMBER;
--
-- spin_lock_irqsave(&ath724x_pci_lock, flags);
--
-- switch (size) {
-- case 1:
-- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
-- mask = 0xff000000 >> ((where % 4)*8);
-- tval = reg_read(addr);
-- tval = tval & ~mask;
-- tval |= (value << ((4 - (where % 4))*8)) & mask;
-- reg_write(addr, tval);
-- break;
-- case 2:
-- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
-- mask = 0xffff0000 >> ((where % 4)*8);
-- tval = reg_read(addr);
-- tval = tval & ~mask;
-- tval |= (value << ((4 - (where % 4))*8)) & mask;
-- reg_write(addr, tval);
-- break;
-- case 4:
-- reg_write((ATH724X_PCI_DEV_BASE + where), value);
-- break;
-- default:
-- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
--
-- return PCIBIOS_BAD_REGISTER_NUMBER;
-- }
--
-- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
--
-- return PCIBIOS_SUCCESSFUL;
--}
--
--static struct pci_ops ath724x_pci_ops = {
-- .read = ath724x_pci_read,
-- .write = ath724x_pci_write,
--};
--
--static struct resource ath724x_io_resource = {
-- .name = "PCI IO space",
-- .start = 0,
-- .end = 0,
-- .flags = IORESOURCE_IO,
--};
--
--static struct resource ath724x_mem_resource = {
-- .name = "PCI memory space",
-- .start = ATH724X_PCI_MEM_BASE,
-- .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
-- .flags = IORESOURCE_MEM,
--};
--
--static struct pci_controller ath724x_pci_controller = {
-- .pci_ops = &ath724x_pci_ops,
-- .io_resource = &ath724x_io_resource,
-- .mem_resource = &ath724x_mem_resource,
--};
--
--int __init ath724x_pcibios_init(void)
--{
-- register_pci_controller(&ath724x_pci_controller);
--
-- return PCIBIOS_SUCCESSFUL;
--}
diff --git a/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-replace-ath724x-to-ar724x.patch b/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-replace-ath724x-to-ar724x.patch
deleted file mode 100644
index 0a224ed..0000000
--- a/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-replace-ath724x-to-ar724x.patch
+++ /dev/null
@@ -1,264 +0,0 @@
-From 9f0c37b1d071355d4c027958f370823c8f891480 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:29:26 +0100
-Subject: [PATCH 10/47] MIPS: ath79: replace ath724x to ar724x
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Replace the 'ath724x' to 'ar724x' in function, variable and
-structure names to reflect the name of the real SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: René Bolldorf <xsecute@googlemail.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3490/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/mach-ubnt-xm.c | 4 +-
- arch/mips/ath79/pci.c | 6 ++--
- arch/mips/ath79/pci.h | 10 +++---
- arch/mips/include/asm/mach-ath79/pci.h | 4 +-
- arch/mips/pci/pci-ar724x.c | 62 ++++++++++++++++----------------
- 5 files changed, 43 insertions(+), 43 deletions(-)
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -84,7 +84,7 @@ static struct ath79_spi_platform_data ub
- #ifdef CONFIG_PCI
- static struct ath9k_platform_data ubnt_xm_eeprom_data;
-
--static struct ath724x_pci_data ubnt_xm_pci_data[] = {
-+static struct ar724x_pci_data ubnt_xm_pci_data[] = {
- {
- .irq = UBNT_XM_PCI_IRQ,
- .pdata = &ubnt_xm_eeprom_data,
-@@ -108,7 +108,7 @@ static void __init ubnt_xm_init(void)
- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
- sizeof(ubnt_xm_eeprom_data.eeprom_data));
-
-- ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
-+ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
- #endif /* CONFIG_PCI */
-
- ath79_register_pci();
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -13,10 +13,10 @@
- #include <asm/mach-ath79/pci.h>
- #include "pci.h"
-
--static struct ath724x_pci_data *pci_data;
-+static struct ar724x_pci_data *pci_data;
- static int pci_data_size;
-
--void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
-+void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
- {
- pci_data = data;
- pci_data_size = size;
-@@ -50,7 +50,7 @@ int pcibios_plat_dev_init(struct pci_dev
- int __init ath79_register_pci(void)
- {
- if (soc_is_ar724x())
-- return ath724x_pcibios_init();
-+ return ar724x_pcibios_init();
-
- return -ENODEV;
- }
---- a/arch/mips/ath79/pci.h
-+++ b/arch/mips/ath79/pci.h
-@@ -8,15 +8,15 @@
- * by the Free Software Foundation.
- */
-
--#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
--#define __ASM_MACH_ATH79_PCI_ATH724X_H
-+#ifndef _ATH79_PCI_H
-+#define _ATH79_PCI_H
-
--struct ath724x_pci_data {
-+struct ar724x_pci_data {
- int irq;
- void *pdata;
- };
-
--void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
-+void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
-
- #ifdef CONFIG_PCI
- int ath79_register_pci(void);
-@@ -24,4 +24,4 @@ int ath79_register_pci(void);
- static inline int ath79_register_pci(void) { return 0; }
- #endif
-
--#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
-+#endif /* _ATH79_PCI_H */
---- a/arch/mips/include/asm/mach-ath79/pci.h
-+++ b/arch/mips/include/asm/mach-ath79/pci.h
-@@ -12,9 +12,9 @@
- #define __ASM_MACH_ATH79_PCI_H
-
- #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
--int ath724x_pcibios_init(void);
-+int ar724x_pcibios_init(void);
- #else
--static inline int ath724x_pcibios_init(void) { return 0; }
-+static inline int ar724x_pcibios_init(void) { return 0; }
- #endif
-
- #endif /* __ASM_MACH_ATH79_PCI_H */
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -14,13 +14,13 @@
- #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
- #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
-
--#define ATH724X_PCI_DEV_BASE 0x14000000
--#define ATH724X_PCI_MEM_BASE 0x10000000
--#define ATH724X_PCI_MEM_SIZE 0x08000000
-+#define AR724X_PCI_DEV_BASE 0x14000000
-+#define AR724X_PCI_MEM_BASE 0x10000000
-+#define AR724X_PCI_MEM_SIZE 0x08000000
-
--static DEFINE_SPINLOCK(ath724x_pci_lock);
-+static DEFINE_SPINLOCK(ar724x_pci_lock);
-
--static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-+static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
- {
- unsigned long flags, addr, tval, mask;
-@@ -31,38 +31,38 @@ static int ath724x_pci_read(struct pci_b
- if (where & (size - 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
-- spin_lock_irqsave(&ath724x_pci_lock, flags);
-+ spin_lock_irqsave(&ar724x_pci_lock, flags);
-
- switch (size) {
- case 1:
- addr = where & ~3;
- mask = 0xff000000 >> ((where % 4) * 8);
-- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
-+ tval = reg_read(AR724X_PCI_DEV_BASE + addr);
- tval = tval & ~mask;
- *value = (tval >> ((4 - (where % 4))*8));
- break;
- case 2:
- addr = where & ~3;
- mask = 0xffff0000 >> ((where % 4)*8);
-- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
-+ tval = reg_read(AR724X_PCI_DEV_BASE + addr);
- tval = tval & ~mask;
- *value = (tval >> ((4 - (where % 4))*8));
- break;
- case 4:
-- *value = reg_read(ATH724X_PCI_DEV_BASE + where);
-+ *value = reg_read(AR724X_PCI_DEV_BASE + where);
- break;
- default:
-- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
-- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
- }
-
--static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-+static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t value)
- {
- unsigned long flags, tval, addr, mask;
-@@ -73,11 +73,11 @@ static int ath724x_pci_write(struct pci_
- if (where & (size - 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
-- spin_lock_irqsave(&ath724x_pci_lock, flags);
-+ spin_lock_irqsave(&ar724x_pci_lock, flags);
-
- switch (size) {
- case 1:
-- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
-+ addr = (AR724X_PCI_DEV_BASE + where) & ~3;
- mask = 0xff000000 >> ((where % 4)*8);
- tval = reg_read(addr);
- tval = tval & ~mask;
-@@ -85,7 +85,7 @@ static int ath724x_pci_write(struct pci_
- reg_write(addr, tval);
- break;
- case 2:
-- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
-+ addr = (AR724X_PCI_DEV_BASE + where) & ~3;
- mask = 0xffff0000 >> ((where % 4)*8);
- tval = reg_read(addr);
- tval = tval & ~mask;
-@@ -93,47 +93,47 @@ static int ath724x_pci_write(struct pci_
- reg_write(addr, tval);
- break;
- case 4:
-- reg_write((ATH724X_PCI_DEV_BASE + where), value);
-+ reg_write((AR724X_PCI_DEV_BASE + where), value);
- break;
- default:
-- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
-- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
- }
-
--static struct pci_ops ath724x_pci_ops = {
-- .read = ath724x_pci_read,
-- .write = ath724x_pci_write,
-+static struct pci_ops ar724x_pci_ops = {
-+ .read = ar724x_pci_read,
-+ .write = ar724x_pci_write,
- };
-
--static struct resource ath724x_io_resource = {
-+static struct resource ar724x_io_resource = {
- .name = "PCI IO space",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IO,
- };
-
--static struct resource ath724x_mem_resource = {
-+static struct resource ar724x_mem_resource = {
- .name = "PCI memory space",
-- .start = ATH724X_PCI_MEM_BASE,
-- .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
-+ .start = AR724X_PCI_MEM_BASE,
-+ .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- };
-
--static struct pci_controller ath724x_pci_controller = {
-- .pci_ops = &ath724x_pci_ops,
-- .io_resource = &ath724x_io_resource,
-- .mem_resource = &ath724x_mem_resource,
-+static struct pci_controller ar724x_pci_controller = {
-+ .pci_ops = &ar724x_pci_ops,
-+ .io_resource = &ar724x_io_resource,
-+ .mem_resource = &ar724x_mem_resource,
- };
-
--int __init ath724x_pcibios_init(void)
-+int __init ar724x_pcibios_init(void)
- {
-- register_pci_controller(&ath724x_pci_controller);
-+ register_pci_controller(&ar724x_pci_controller);
-
- return PCIBIOS_SUCCESSFUL;
- }
diff --git a/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch b/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch
deleted file mode 100644
index 108ac10..0000000
--- a/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From 0f5728e7e6fa7f0969ec79bd623261d3d830e5e7 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:29:27 +0100
-Subject: [PATCH 11/47] MIPS: ath79: use io-accessor macros in pci-ar724x.c
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: René Bolldorf <xsecute@googlemail.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3491/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/pci/pci-ar724x.c | 38 ++++++++++++++++++++++++--------------
- 1 files changed, 24 insertions(+), 14 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -11,19 +11,19 @@
- #include <linux/pci.h>
- #include <asm/mach-ath79/pci.h>
-
--#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
--#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
--
--#define AR724X_PCI_DEV_BASE 0x14000000
-+#define AR724X_PCI_CFG_BASE 0x14000000
-+#define AR724X_PCI_CFG_SIZE 0x1000
- #define AR724X_PCI_MEM_BASE 0x10000000
- #define AR724X_PCI_MEM_SIZE 0x08000000
-
- static DEFINE_SPINLOCK(ar724x_pci_lock);
-+static void __iomem *ar724x_pci_devcfg_base;
-
- static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
- {
- unsigned long flags, addr, tval, mask;
-+ void __iomem *base;
-
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-@@ -31,25 +31,27 @@ static int ar724x_pci_read(struct pci_bu
- if (where & (size - 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
-+ base = ar724x_pci_devcfg_base;
-+
- spin_lock_irqsave(&ar724x_pci_lock, flags);
-
- switch (size) {
- case 1:
- addr = where & ~3;
- mask = 0xff000000 >> ((where % 4) * 8);
-- tval = reg_read(AR724X_PCI_DEV_BASE + addr);
-+ tval = __raw_readl(base + addr);
- tval = tval & ~mask;
- *value = (tval >> ((4 - (where % 4))*8));
- break;
- case 2:
- addr = where & ~3;
- mask = 0xffff0000 >> ((where % 4)*8);
-- tval = reg_read(AR724X_PCI_DEV_BASE + addr);
-+ tval = __raw_readl(base + addr);
- tval = tval & ~mask;
- *value = (tval >> ((4 - (where % 4))*8));
- break;
- case 4:
-- *value = reg_read(AR724X_PCI_DEV_BASE + where);
-+ *value = __raw_readl(base + where);
- break;
- default:
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-@@ -66,6 +68,7 @@ static int ar724x_pci_write(struct pci_b
- int size, uint32_t value)
- {
- unsigned long flags, tval, addr, mask;
-+ void __iomem *base;
-
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-@@ -73,27 +76,29 @@ static int ar724x_pci_write(struct pci_b
- if (where & (size - 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
-+ base = ar724x_pci_devcfg_base;
-+
- spin_lock_irqsave(&ar724x_pci_lock, flags);
-
- switch (size) {
- case 1:
-- addr = (AR724X_PCI_DEV_BASE + where) & ~3;
-+ addr = where & ~3;
- mask = 0xff000000 >> ((where % 4)*8);
-- tval = reg_read(addr);
-+ tval = __raw_readl(base + addr);
- tval = tval & ~mask;
- tval |= (value << ((4 - (where % 4))*8)) & mask;
-- reg_write(addr, tval);
-+ __raw_writel(tval, base + addr);
- break;
- case 2:
-- addr = (AR724X_PCI_DEV_BASE + where) & ~3;
-+ addr = where & ~3;
- mask = 0xffff0000 >> ((where % 4)*8);
-- tval = reg_read(addr);
-+ tval = __raw_readl(base + addr);
- tval = tval & ~mask;
- tval |= (value << ((4 - (where % 4))*8)) & mask;
-- reg_write(addr, tval);
-+ __raw_writel(tval, base + addr);
- break;
- case 4:
-- reg_write((AR724X_PCI_DEV_BASE + where), value);
-+ __raw_writel(value, (base + where));
- break;
- default:
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-@@ -133,6 +138,11 @@ static struct pci_controller ar724x_pci_
-
- int __init ar724x_pcibios_init(void)
- {
-+ ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
-+ AR724X_PCI_CFG_SIZE);
-+ if (ar724x_pci_devcfg_base == NULL)
-+ return -ENOMEM;
-+
- register_pci_controller(&ar724x_pci_controller);
-
- return PCIBIOS_SUCCESSFUL;
diff --git a/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch b/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch
deleted file mode 100644
index 9ce1c39..0000000
--- a/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From e9889bee75d03338daf7ed422661ae28f3aa7063 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:03 +0100
-Subject: [PATCH 12/47] MIPS: ath79: remove superfluous alignment checks from pci-ar724x.c
-
-The alignment of the 'where' parameters are checked
-in the core PCI code already.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3492/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/pci/pci-ar724x.c | 6 ------
- 1 files changed, 0 insertions(+), 6 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -28,9 +28,6 @@ static int ar724x_pci_read(struct pci_bu
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
-- if (where & (size - 1))
-- return PCIBIOS_BAD_REGISTER_NUMBER;
--
- base = ar724x_pci_devcfg_base;
-
- spin_lock_irqsave(&ar724x_pci_lock, flags);
-@@ -73,9 +70,6 @@ static int ar724x_pci_write(struct pci_b
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
-- if (where & (size - 1))
-- return PCIBIOS_BAD_REGISTER_NUMBER;
--
- base = ar724x_pci_devcfg_base;
-
- spin_lock_irqsave(&ar724x_pci_lock, flags);
diff --git a/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch b/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch
deleted file mode 100644
index 97db6de..0000000
--- a/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 39f3275077a5b143616fcb3e7a6457a5c42739ee Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:04 +0100
-Subject: [PATCH 13/47] MIPS: ath79: fix broken ar724x_pci_{read,write} functions
-
-The current ar724x_pci_{read,write} functions are
-broken. Due to that, pci_read_config_byte returns
-with bogus values, and pci_write_config_{byte,word}
-unconditionally clears the accessed PCI configuration
-registers instead of changing the value of them.
-
-The patch fixes the broken functions, thus the PCI
-configuration space can be accessed correctly.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3493/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/pci/pci-ar724x.c | 52 ++++++++++++++++++++++----------------------
- 1 files changed, 26 insertions(+), 26 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -22,8 +22,9 @@ static void __iomem *ar724x_pci_devcfg_b
- static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
- {
-- unsigned long flags, addr, tval, mask;
-+ unsigned long flags;
- void __iomem *base;
-+ u32 data;
-
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-@@ -31,24 +32,22 @@ static int ar724x_pci_read(struct pci_bu
- base = ar724x_pci_devcfg_base;
-
- spin_lock_irqsave(&ar724x_pci_lock, flags);
-+ data = __raw_readl(base + (where & ~3));
-
- switch (size) {
- case 1:
-- addr = where & ~3;
-- mask = 0xff000000 >> ((where % 4) * 8);
-- tval = __raw_readl(base + addr);
-- tval = tval & ~mask;
-- *value = (tval >> ((4 - (where % 4))*8));
-+ if (where & 1)
-+ data >>= 8;
-+ if (where & 2)
-+ data >>= 16;
-+ data &= 0xff;
- break;
- case 2:
-- addr = where & ~3;
-- mask = 0xffff0000 >> ((where % 4)*8);
-- tval = __raw_readl(base + addr);
-- tval = tval & ~mask;
-- *value = (tval >> ((4 - (where % 4))*8));
-+ if (where & 2)
-+ data >>= 16;
-+ data &= 0xffff;
- break;
- case 4:
-- *value = __raw_readl(base + where);
- break;
- default:
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-@@ -57,6 +56,7 @@ static int ar724x_pci_read(struct pci_bu
- }
-
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-+ *value = data;
-
- return PCIBIOS_SUCCESSFUL;
- }
-@@ -64,8 +64,10 @@ static int ar724x_pci_read(struct pci_bu
- static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t value)
- {
-- unsigned long flags, tval, addr, mask;
-+ unsigned long flags;
- void __iomem *base;
-+ u32 data;
-+ int s;
-
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-@@ -73,26 +75,21 @@ static int ar724x_pci_write(struct pci_b
- base = ar724x_pci_devcfg_base;
-
- spin_lock_irqsave(&ar724x_pci_lock, flags);
-+ data = __raw_readl(base + (where & ~3));
-
- switch (size) {
- case 1:
-- addr = where & ~3;
-- mask = 0xff000000 >> ((where % 4)*8);
-- tval = __raw_readl(base + addr);
-- tval = tval & ~mask;
-- tval |= (value << ((4 - (where % 4))*8)) & mask;
-- __raw_writel(tval, base + addr);
-+ s = ((where & 3) * 8);
-+ data &= ~(0xff << s);
-+ data |= ((value & 0xff) << s);
- break;
- case 2:
-- addr = where & ~3;
-- mask = 0xffff0000 >> ((where % 4)*8);
-- tval = __raw_readl(base + addr);
-- tval = tval & ~mask;
-- tval |= (value << ((4 - (where % 4))*8)) & mask;
-- __raw_writel(tval, base + addr);
-+ s = ((where & 2) * 8);
-+ data &= ~(0xffff << s);
-+ data |= ((value & 0xffff) << s);
- break;
- case 4:
-- __raw_writel(value, (base + where));
-+ data = value;
- break;
- default:
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-@@ -100,6 +97,9 @@ static int ar724x_pci_write(struct pci_b
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
-+ __raw_writel(data, base + (where & ~3));
-+ /* flush write */
-+ __raw_readl(base + (where & ~3));
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
diff --git a/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch b/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch
deleted file mode 100644
index 8ed823b..0000000
--- a/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 14eaf9b1cda516b4182e56f61c21fa2eaa9ade6b Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:05 +0100
-Subject: [PATCH 14/47] MIPS: ath79: add a workaround for a PCI controller bug in AR7240 SoCs
-
-The PCI controller of the AR724X SoCs has a hardware
-bag. If the BAR0 register of the PCI device is set to
-the proper base address, the memory address space of
-the device is not accessible.
-
-When the device driver tries to access the memory
-address space of the PCI device, it leads to data
-bus error, similiar to this:
-
-Data bus error, epc == 801f69a0, ra == 801f698c
-Oops[#1]:
-Cpu 0
-$ 0 : 00000000 00000061 deadbeef 000000ff
-$ 4 : 00000000 000000ff 00000014 00000000
-$ 8 : ff000000 fffffffc 00000000 00000000
-$12 : 000001f5 00000006 00000000 6e637920
-$16 : 81ca4000 81ca0260 81ca4000 804d70f0
-$20 : fffffff4 0000002b 803ad4c4 00000000
-$24 : 00000003 00000000
-$28 : 81c20000 81c21c60 00000000 801f698c
-Hi : 00000000
-Lo : 00000000
-epc : 801f69a0 ath9k_hw_init+0xd0/0xa70
- Not tainted
-ra : 801f698c ath9k_hw_init+0xbc/0xa70
-Status: 1000c103 KERNEL EXL IE
-Cause : 1080001c
-PrId : 00019374 (MIPS 24Kc)
-Modules linked in:
-Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
-Stack : 00000000 00000000 00000000 00000000 81c21c78 81ca0260 00000000 804d70f0
- 81ca0260 81c21cc0 81ca0e80 81ca0260 81ca4000 804d70f0 fffffff4 0000002b
- 803ad4c4 00000000 00000000 801e3ae8 81c9d080 81ca0e80 b0000000 800b9b9c
- 00000008 81c9d000 8031aeb0 802d38a0 00000000 81c14c00 81c14c60 00000000
- 81ca0e80 81ca0260 b0000000 801f08a4 81c9c820 81c21d48 81c9c820 80144320
- ...
-Call Trace:
-[<801f69a0>] ath9k_hw_init+0xd0/0xa70
-[<801e3ae8>] ath9k_init_device+0x174/0x680
-[<801f08a4>] ath_pci_probe+0x27c/0x380
-[<8019e490>] pci_device_probe+0x74/0x9c
-[<801bfadc>] driver_probe_device+0x9c/0x1b4
-[<801bfcb0>] __driver_attach+0xbc/0xc4
-[<801bea0c>] bus_for_each_dev+0x5c/0x98
-[<801bf394>] bus_add_driver+0x1d0/0x2a4
-[<801c0364>] driver_register+0x8c/0x16c
-[<8019e72c>] __pci_register_driver+0x4c/0xe4
-[<803d3d40>] ath9k_init+0x3c/0x88
-[<80060930>] do_one_initcall+0x3c/0x1cc
-[<803c297c>] kernel_init+0xa4/0x138
-[<80063c04>] kernel_thread_helper+0x10/0x18
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3494/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/pci/pci-ar724x.c | 36 +++++++++++++++++++++++++++++++++++-
- 1 files changed, 35 insertions(+), 1 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -9,6 +9,7 @@
- */
-
- #include <linux/pci.h>
-+#include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/pci.h>
-
- #define AR724X_PCI_CFG_BASE 0x14000000
-@@ -16,9 +17,14 @@
- #define AR724X_PCI_MEM_BASE 0x10000000
- #define AR724X_PCI_MEM_SIZE 0x08000000
-
-+#define AR7240_BAR0_WAR_VALUE 0xffff
-+
- static DEFINE_SPINLOCK(ar724x_pci_lock);
- static void __iomem *ar724x_pci_devcfg_base;
-
-+static u32 ar724x_pci_bar0_value;
-+static bool ar724x_pci_bar0_is_cached;
-+
- static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
- {
-@@ -56,7 +62,14 @@ static int ar724x_pci_read(struct pci_bu
- }
-
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-- *value = data;
-+
-+ if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
-+ ar724x_pci_bar0_is_cached) {
-+ /* use the cached value */
-+ *value = ar724x_pci_bar0_value;
-+ } else {
-+ *value = data;
-+ }
-
- return PCIBIOS_SUCCESSFUL;
- }
-@@ -72,6 +85,27 @@ static int ar724x_pci_write(struct pci_b
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
-+ if (soc_is_ar7240() && where == PCI_BASE_ADDRESS_0 && size == 4) {
-+ if (value != 0xffffffff) {
-+ /*
-+ * WAR for a hw issue. If the BAR0 register of the
-+ * device is set to the proper base address, the
-+ * memory space of the device is not accessible.
-+ *
-+ * Cache the intended value so it can be read back,
-+ * and write a SoC specific constant value to the
-+ * BAR0 register in order to make the device memory
-+ * accessible.
-+ */
-+ ar724x_pci_bar0_is_cached = true;
-+ ar724x_pci_bar0_value = value;
-+
-+ value = AR7240_BAR0_WAR_VALUE;
-+ } else {
-+ ar724x_pci_bar0_is_cached = false;
-+ }
-+ }
-+
- base = ar724x_pci_devcfg_base;
-
- spin_lock_irqsave(&ar724x_pci_lock, flags);
diff --git a/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-a-wrong-IRQ-number.patch b/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-a-wrong-IRQ-number.patch
deleted file mode 100644
index 8702e65..0000000
--- a/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-a-wrong-IRQ-number.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From d710990df726cceffb62488e597ecfc4a9e13aa5 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:06 +0100
-Subject: [PATCH 15/47] MIPS: ath79: fix a wrong IRQ number
-
-The Ubiquiti XM board setup code uses an invalid
-IRQ number, because it if above of NR_IRQS. This
-leads to failed 'request_irq' calls:
-
- ath9k 0000:00:00.0: request_irq failed
- ath9k: probe of 0000:00:00.0 failed with error -22
-
-Preserve some IRQ numbers for the built-in IRQ
-controller of PCI host controllers in the
-AR71XX/AR724X SoCs, and use the correct IRQ
-number in the board setup code.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3495/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/mach-ubnt-xm.c | 5 +++--
- arch/mips/include/asm/mach-ath79/irq.h | 6 +++++-
- 2 files changed, 8 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -17,6 +17,8 @@
- #include <linux/ath9k_platform.h>
- #endif /* CONFIG_PCI */
-
-+#include <asm/mach-ath79/irq.h>
-+
- #include "machtypes.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-@@ -33,7 +35,6 @@
- #define UBNT_XM_KEYS_POLL_INTERVAL 20
- #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-
--#define UBNT_XM_PCI_IRQ 48
- #define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
-
- static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
-@@ -86,7 +87,7 @@ static struct ath9k_platform_data ubnt_x
-
- static struct ar724x_pci_data ubnt_xm_pci_data[] = {
- {
-- .irq = UBNT_XM_PCI_IRQ,
-+ .irq = ATH79_PCI_IRQ(0),
- .pdata = &ubnt_xm_eeprom_data,
- },
- };
---- a/arch/mips/include/asm/mach-ath79/irq.h
-+++ b/arch/mips/include/asm/mach-ath79/irq.h
-@@ -10,11 +10,15 @@
- #define __ASM_MACH_ATH79_IRQ_H
-
- #define MIPS_CPU_IRQ_BASE 0
--#define NR_IRQS 40
-+#define NR_IRQS 46
-
- #define ATH79_MISC_IRQ_BASE 8
- #define ATH79_MISC_IRQ_COUNT 32
-
-+#define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
-+#define ATH79_PCI_IRQ_COUNT 6
-+#define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x))
-+
- #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
- #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
- #define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
diff --git a/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch b/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch
deleted file mode 100644
index 0c15a54..0000000
--- a/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From 1fd24b552708544ca6233ff7ba60342e9f7e5582 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:07 +0100
-Subject: [PATCH 16/47] MIPS: ath79: add PCI IRQ handling code for AR724X SoCs
-
-The PCI Host Controller of the AR724x SoC has a
-built-in IRQ controller. The current code does
-not supports that, so the IRQ lines wired to this
-controller are not usable. This leads to failed
-'request_irq' calls:
-
- ath9k 0000:00:00.0: request_irq failed
- ath9k: probe of 0000:00:00.0 failed with error -89
-
-This patch adds support for the IRQ controller
-in order to make PCI IRQs work.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3496/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/pci.c | 3 +-
- arch/mips/include/asm/mach-ath79/pci.h | 4 +-
- arch/mips/pci/pci-ar724x.c | 118 +++++++++++++++++++++++++++++++-
- 3 files changed, 120 insertions(+), 5 deletions(-)
-
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -10,6 +10,7 @@
-
- #include <linux/pci.h>
- #include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/irq.h>
- #include <asm/mach-ath79/pci.h>
- #include "pci.h"
-
-@@ -50,7 +51,7 @@ int pcibios_plat_dev_init(struct pci_dev
- int __init ath79_register_pci(void)
- {
- if (soc_is_ar724x())
-- return ar724x_pcibios_init();
-+ return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
-
- return -ENODEV;
- }
---- a/arch/mips/include/asm/mach-ath79/pci.h
-+++ b/arch/mips/include/asm/mach-ath79/pci.h
-@@ -12,9 +12,9 @@
- #define __ASM_MACH_ATH79_PCI_H
-
- #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
--int ar724x_pcibios_init(void);
-+int ar724x_pcibios_init(int irq);
- #else
--static inline int ar724x_pcibios_init(void) { return 0; }
-+static inline int ar724x_pcibios_init(int irq) { return 0; }
- #endif
-
- #endif /* __ASM_MACH_ATH79_PCI_H */
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -8,19 +8,32 @@
- * by the Free Software Foundation.
- */
-
-+#include <linux/irq.h>
- #include <linux/pci.h>
- #include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/pci.h>
-
- #define AR724X_PCI_CFG_BASE 0x14000000
- #define AR724X_PCI_CFG_SIZE 0x1000
-+#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
-+#define AR724X_PCI_CTRL_SIZE 0x100
-+
- #define AR724X_PCI_MEM_BASE 0x10000000
- #define AR724X_PCI_MEM_SIZE 0x08000000
-
-+#define AR724X_PCI_REG_INT_STATUS 0x4c
-+#define AR724X_PCI_REG_INT_MASK 0x50
-+
-+#define AR724X_PCI_INT_DEV0 BIT(14)
-+
-+#define AR724X_PCI_IRQ_COUNT 1
-+
- #define AR7240_BAR0_WAR_VALUE 0xffff
-
- static DEFINE_SPINLOCK(ar724x_pci_lock);
- static void __iomem *ar724x_pci_devcfg_base;
-+static void __iomem *ar724x_pci_ctrl_base;
-
- static u32 ar724x_pci_bar0_value;
- static bool ar724x_pci_bar0_is_cached;
-@@ -164,14 +177,115 @@ static struct pci_controller ar724x_pci_
- .mem_resource = &ar724x_mem_resource,
- };
-
--int __init ar724x_pcibios_init(void)
-+static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
-+{
-+ void __iomem *base;
-+ u32 pending;
-+
-+ base = ar724x_pci_ctrl_base;
-+
-+ pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
-+ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+
-+ if (pending & AR724X_PCI_INT_DEV0)
-+ generic_handle_irq(ATH79_PCI_IRQ(0));
-+
-+ else
-+ spurious_interrupt();
-+}
-+
-+static void ar724x_pci_irq_unmask(struct irq_data *d)
-+{
-+ void __iomem *base;
-+ u32 t;
-+
-+ base = ar724x_pci_ctrl_base;
-+
-+ switch (d->irq) {
-+ case ATH79_PCI_IRQ(0):
-+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+ __raw_writel(t | AR724X_PCI_INT_DEV0,
-+ base + AR724X_PCI_REG_INT_MASK);
-+ /* flush write */
-+ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+ }
-+}
-+
-+static void ar724x_pci_irq_mask(struct irq_data *d)
-+{
-+ void __iomem *base;
-+ u32 t;
-+
-+ base = ar724x_pci_ctrl_base;
-+
-+ switch (d->irq) {
-+ case ATH79_PCI_IRQ(0):
-+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+ __raw_writel(t & ~AR724X_PCI_INT_DEV0,
-+ base + AR724X_PCI_REG_INT_MASK);
-+
-+ /* flush write */
-+ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+
-+ t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
-+ __raw_writel(t | AR724X_PCI_INT_DEV0,
-+ base + AR724X_PCI_REG_INT_STATUS);
-+
-+ /* flush write */
-+ __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
-+ }
-+}
-+
-+static struct irq_chip ar724x_pci_irq_chip = {
-+ .name = "AR724X PCI ",
-+ .irq_mask = ar724x_pci_irq_mask,
-+ .irq_unmask = ar724x_pci_irq_unmask,
-+ .irq_mask_ack = ar724x_pci_irq_mask,
-+};
-+
-+static void __init ar724x_pci_irq_init(int irq)
-+{
-+ void __iomem *base;
-+ int i;
-+
-+ base = ar724x_pci_ctrl_base;
-+
-+ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
-+ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
-+
-+ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
-+
-+ for (i = ATH79_PCI_IRQ_BASE;
-+ i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
-+ handle_level_irq);
-+
-+ irq_set_chained_handler(irq, ar724x_pci_irq_handler);
-+}
-+
-+int __init ar724x_pcibios_init(int irq)
- {
-+ int ret;
-+
-+ ret = -ENOMEM;
-+
- ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
- AR724X_PCI_CFG_SIZE);
- if (ar724x_pci_devcfg_base == NULL)
-- return -ENOMEM;
-+ goto err;
-
-+ ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE,
-+ AR724X_PCI_CTRL_SIZE);
-+ if (ar724x_pci_ctrl_base == NULL)
-+ goto err_unmap_devcfg;
-+
-+ ar724x_pci_irq_init(irq);
- register_pci_controller(&ar724x_pci_controller);
-
- return PCIBIOS_SUCCESSFUL;
-+
-+err_unmap_devcfg:
-+ iounmap(ar724x_pci_devcfg_base);
-+err:
-+ return ret;
- }
diff --git a/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch b/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch
deleted file mode 100644
index 4ef0805..0000000
--- a/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From b2ab491ed634a4c0b7af5f11940e0ca42b1a87c8 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:08 +0100
-Subject: [PATCH 17/47] MIPS: ath79: get rid of some ifdefs in mach-ubnt-xm.c
-
-Remove a superfluous ifdef around an include. Also
-reorganize the board setup code a bit, so another
-ifdef can be removed.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3497/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/mach-ubnt-xm.c | 23 ++++++++++++-----------
- 1 files changed, 12 insertions(+), 11 deletions(-)
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -12,10 +12,7 @@
-
- #include <linux/init.h>
- #include <linux/pci.h>
--
--#ifdef CONFIG_PCI
- #include <linux/ath9k_platform.h>
--#endif /* CONFIG_PCI */
-
- #include <asm/mach-ath79/irq.h>
-
-@@ -91,6 +88,17 @@ static struct ar724x_pci_data ubnt_xm_pc
- .pdata = &ubnt_xm_eeprom_data,
- },
- };
-+
-+static void __init ubnt_xm_pci_init(void)
-+{
-+ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
-+ sizeof(ubnt_xm_eeprom_data.eeprom_data));
-+
-+ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
-+ ath79_register_pci();
-+}
-+#else
-+static inline void ubnt_xm_pci_init(void) {}
- #endif /* CONFIG_PCI */
-
- static void __init ubnt_xm_init(void)
-@@ -105,14 +113,7 @@ static void __init ubnt_xm_init(void)
- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
- ARRAY_SIZE(ubnt_xm_spi_info));
-
--#ifdef CONFIG_PCI
-- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
-- sizeof(ubnt_xm_eeprom_data.eeprom_data));
--
-- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
--#endif /* CONFIG_PCI */
--
-- ath79_register_pci();
-+ ubnt_xm_pci_init();
- }
-
- MIPS_MACHINE(ATH79_MACH_UBNT_XM,
diff --git a/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch b/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch
deleted file mode 100644
index 38765b0..0000000
--- a/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 2b62c9d685d9bb048a006b695683b2a812c0a847 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:09 +0100
-Subject: [PATCH 18/47] MIPS: ath79: allow to use board specific pci_plat_dev_init functions
-
-Th current implementation causes NULL pointer dereference
-if 'pci_data' is not set:
-
-pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
-pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI
-address [0x10000000-0x1000ffff])
-CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802daca0, ra == 802e78a4
-Oops[#1]:
-Cpu 0
-$ 0 : 00000000 80420000 00000000 00000000
-$ 4 : 00000000 00000000 00000001 00000001
-$ 8 : 00000001 0000032c 81c54700 00000001
-$12 : 0000032d 0000000f 00000000 ffffffff
-$16 : 81c14c00 00000001 802dac74 80195f98
-$20 : 802ea050 00000000 00000000 00000000
-$24 : 00000003 800617f0
-$28 : 81c20000 81c21e70 00000000 802e78a4
-Hi : 00000000
-Lo : 4190ab00
-epc : 802daca0 0x802daca0
- Not tainted
-ra : 802e78a4 0x802e78a4
-Status: 1000c003 KERNEL EXL IE
-Cause : 00800008
-BadVA : 00000000
-PrId : 00019374 (MIPS 24Kc)
-Modules linked in:
-Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
-Stack : 00000000 8027d5d8 802e8ae0 00000000 01000000 802e8b5c 81c50600 00000000
- 802ff290 00000000 80420000 802ea0bc 00000000 00000000 80420000 802ff290
- 80420000 80060930 33390000 00000000 00002308 80140a80 00000028 802d0000
- 00000000 800ba024 802ff004 802ff0c8 802ff290 00000000 00000000 00000000
- 00000000 802d897c 01234567 7f827068 00000000 0045f798 00460000 00000000
-
-This can be avoided by calling the 'ar724x_pci_add_data'
-function from the board specific setup code. However it
-makes no sense to use that function for every board,
-especially when the board does not needs to set the
-platform_data field of any PCI device.
-
-The patch allows the board setup code to specify a board
-specific function if that is required.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3499/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/mach-ubnt-xm.c | 13 ++++++++++++-
- arch/mips/ath79/pci.c | 14 ++++++++------
- arch/mips/ath79/pci.h | 4 +++-
- 3 files changed, 23 insertions(+), 8 deletions(-)
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -85,16 +85,27 @@ static struct ath9k_platform_data ubnt_x
- static struct ar724x_pci_data ubnt_xm_pci_data[] = {
- {
- .irq = ATH79_PCI_IRQ(0),
-- .pdata = &ubnt_xm_eeprom_data,
- },
- };
-
-+static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ switch (PCI_SLOT(dev->devfn)) {
-+ case 0:
-+ dev->dev.platform_data = &ubnt_xm_eeprom_data;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
- static void __init ubnt_xm_pci_init(void)
- {
- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
- sizeof(ubnt_xm_eeprom_data.eeprom_data));
-
- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
-+ ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
- ath79_register_pci();
- }
- #else
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -14,6 +14,7 @@
- #include <asm/mach-ath79/pci.h>
- #include "pci.h"
-
-+static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
- static struct ar724x_pci_data *pci_data;
- static int pci_data_size;
-
-@@ -38,14 +39,15 @@ int __init pcibios_map_irq(const struct
-
- int pcibios_plat_dev_init(struct pci_dev *dev)
- {
-- unsigned int devfn = dev->devfn;
--
-- if (devfn > pci_data_size - 1)
-- return PCIBIOS_DEVICE_NOT_FOUND;
-+ if (ath79_pci_plat_dev_init)
-+ return ath79_pci_plat_dev_init(dev);
-
-- dev->dev.platform_data = pci_data[devfn].pdata;
-+ return 0;
-+}
-
-- return PCIBIOS_SUCCESSFUL;
-+void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
-+{
-+ ath79_pci_plat_dev_init = func;
- }
-
- int __init ath79_register_pci(void)
---- a/arch/mips/ath79/pci.h
-+++ b/arch/mips/ath79/pci.h
-@@ -13,14 +13,16 @@
-
- struct ar724x_pci_data {
- int irq;
-- void *pdata;
- };
-
- void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
-
- #ifdef CONFIG_PCI
-+void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
- int ath79_register_pci(void);
- #else
-+static inline void
-+ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
- static inline int ath79_register_pci(void) { return 0; }
- #endif
-
diff --git a/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch b/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch
deleted file mode 100644
index 4021af2..0000000
--- a/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch
+++ /dev/null
@@ -1,436 +0,0 @@
-From 4201b6aeb059b481571c241a2fc96fd3f41032e9 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:10 +0100
-Subject: [PATCH 19/47] MIPS: ath79: add support for the PCI host controller of the AR71XX SoCs
-
-The Atheros AR71XX SoCs have a built-in PCI Host Controller.
-This patch adds a driver for that, and modifies the relevant
-files in order to allow to register the PCI controller from
-board specific setup.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3498/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/Kconfig | 1 +
- arch/mips/include/asm/mach-ath79/pci.h | 6 +
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-ar71xx.c | 375 ++++++++++++++++++++++++++++++++
- 4 files changed, 383 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/pci/pci-ar71xx.c
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -52,6 +52,7 @@ endmenu
- config SOC_AR71XX
- select USB_ARCH_HAS_EHCI
- select USB_ARCH_HAS_OHCI
-+ select HW_HAS_PCI
- def_bool n
-
- config SOC_AR724X
---- a/arch/mips/include/asm/mach-ath79/pci.h
-+++ b/arch/mips/include/asm/mach-ath79/pci.h
-@@ -11,6 +11,12 @@
- #ifndef __ASM_MACH_ATH79_PCI_H
- #define __ASM_MACH_ATH79_PCI_H
-
-+#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
-+int ar71xx_pcibios_init(void);
-+#else
-+static inline int ar71xx_pcibios_init(void) { return 0; }
-+#endif
-+
- #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
- int ar724x_pcibios_init(int irq);
- #else
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
- ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
-+obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
- obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
-
- #
---- /dev/null
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -0,0 +1,375 @@
-+/*
-+ * Atheros AR71xx PCI host controller driver
-+ *
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Parts of this file are based on Atheros' 2.6.15 BSP
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/resource.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/pci.h>
-+
-+#define AR71XX_PCI_MEM_BASE 0x10000000
-+#define AR71XX_PCI_MEM_SIZE 0x08000000
-+
-+#define AR71XX_PCI_WIN0_OFFS 0x10000000
-+#define AR71XX_PCI_WIN1_OFFS 0x11000000
-+#define AR71XX_PCI_WIN2_OFFS 0x12000000
-+#define AR71XX_PCI_WIN3_OFFS 0x13000000
-+#define AR71XX_PCI_WIN4_OFFS 0x14000000
-+#define AR71XX_PCI_WIN5_OFFS 0x15000000
-+#define AR71XX_PCI_WIN6_OFFS 0x16000000
-+#define AR71XX_PCI_WIN7_OFFS 0x07000000
-+
-+#define AR71XX_PCI_CFG_BASE \
-+ (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
-+#define AR71XX_PCI_CFG_SIZE 0x100
-+
-+#define AR71XX_PCI_REG_CRP_AD_CBE 0x00
-+#define AR71XX_PCI_REG_CRP_WRDATA 0x04
-+#define AR71XX_PCI_REG_CRP_RDDATA 0x08
-+#define AR71XX_PCI_REG_CFG_AD 0x0c
-+#define AR71XX_PCI_REG_CFG_CBE 0x10
-+#define AR71XX_PCI_REG_CFG_WRDATA 0x14
-+#define AR71XX_PCI_REG_CFG_RDDATA 0x18
-+#define AR71XX_PCI_REG_PCI_ERR 0x1c
-+#define AR71XX_PCI_REG_PCI_ERR_ADDR 0x20
-+#define AR71XX_PCI_REG_AHB_ERR 0x24
-+#define AR71XX_PCI_REG_AHB_ERR_ADDR 0x28
-+
-+#define AR71XX_PCI_CRP_CMD_WRITE 0x00010000
-+#define AR71XX_PCI_CRP_CMD_READ 0x00000000
-+#define AR71XX_PCI_CFG_CMD_READ 0x0000000a
-+#define AR71XX_PCI_CFG_CMD_WRITE 0x0000000b
-+
-+#define AR71XX_PCI_INT_CORE BIT(4)
-+#define AR71XX_PCI_INT_DEV2 BIT(2)
-+#define AR71XX_PCI_INT_DEV1 BIT(1)
-+#define AR71XX_PCI_INT_DEV0 BIT(0)
-+
-+#define AR71XX_PCI_IRQ_COUNT 5
-+
-+static DEFINE_SPINLOCK(ar71xx_pci_lock);
-+static void __iomem *ar71xx_pcicfg_base;
-+
-+/* Byte lane enable bits */
-+static const u8 ar71xx_pci_ble_table[4][4] = {
-+ {0x0, 0xf, 0xf, 0xf},
-+ {0xe, 0xd, 0xb, 0x7},
-+ {0xc, 0xf, 0x3, 0xf},
-+ {0xf, 0xf, 0xf, 0xf},
-+};
-+
-+static const u32 ar71xx_pci_read_mask[8] = {
-+ 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
-+};
-+
-+static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
-+{
-+ u32 t;
-+
-+ t = ar71xx_pci_ble_table[size & 3][where & 3];
-+ BUG_ON(t == 0xf);
-+ t <<= (local) ? 20 : 4;
-+
-+ return t;
-+}
-+
-+static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn,
-+ int where)
-+{
-+ u32 ret;
-+
-+ if (!bus->number) {
-+ /* type 0 */
-+ ret = (1 << PCI_SLOT(devfn)) | (PCI_FUNC(devfn) << 8) |
-+ (where & ~3);
-+ } else {
-+ /* type 1 */
-+ ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) |
-+ (PCI_FUNC(devfn) << 8) | (where & ~3) | 1;
-+ }
-+
-+ return ret;
-+}
-+
-+static int ar71xx_pci_check_error(int quiet)
-+{
-+ void __iomem *base = ar71xx_pcicfg_base;
-+ u32 pci_err;
-+ u32 ahb_err;
-+
-+ pci_err = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR) & 3;
-+ if (pci_err) {
-+ if (!quiet) {
-+ u32 addr;
-+
-+ addr = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR_ADDR);
-+ pr_crit("ar71xx: %s bus error %d at addr 0x%x\n",
-+ "PCI", pci_err, addr);
-+ }
-+
-+ /* clear PCI error status */
-+ __raw_writel(pci_err, base + AR71XX_PCI_REG_PCI_ERR);
-+ }
-+
-+ ahb_err = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR) & 1;
-+ if (ahb_err) {
-+ if (!quiet) {
-+ u32 addr;
-+
-+ addr = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR_ADDR);
-+ pr_crit("ar71xx: %s bus error %d at addr 0x%x\n",
-+ "AHB", ahb_err, addr);
-+ }
-+
-+ /* clear AHB error status */
-+ __raw_writel(ahb_err, base + AR71XX_PCI_REG_AHB_ERR);
-+ }
-+
-+ return !!(ahb_err | pci_err);
-+}
-+
-+static inline void ar71xx_pci_local_write(int where, int size, u32 value)
-+{
-+ void __iomem *base = ar71xx_pcicfg_base;
-+ u32 ad_cbe;
-+
-+ value = value << (8 * (where & 3));
-+
-+ ad_cbe = AR71XX_PCI_CRP_CMD_WRITE | (where & ~3);
-+ ad_cbe |= ar71xx_pci_get_ble(where, size, 1);
-+
-+ __raw_writel(ad_cbe, base + AR71XX_PCI_REG_CRP_AD_CBE);
-+ __raw_writel(value, base + AR71XX_PCI_REG_CRP_WRDATA);
-+}
-+
-+static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus,
-+ unsigned int devfn,
-+ int where, int size, u32 cmd)
-+{
-+ void __iomem *base = ar71xx_pcicfg_base;
-+ u32 addr;
-+
-+ addr = ar71xx_pci_bus_addr(bus, devfn, where);
-+
-+ __raw_writel(addr, base + AR71XX_PCI_REG_CFG_AD);
-+ __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
-+ base + AR71XX_PCI_REG_CFG_CBE);
-+
-+ return ar71xx_pci_check_error(1);
-+}
-+
-+static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *value)
-+{
-+ void __iomem *base = ar71xx_pcicfg_base;
-+ unsigned long flags;
-+ u32 data;
-+ int err;
-+ int ret;
-+
-+ ret = PCIBIOS_SUCCESSFUL;
-+ data = ~0;
-+
-+ spin_lock_irqsave(&ar71xx_pci_lock, flags);
-+
-+ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
-+ AR71XX_PCI_CFG_CMD_READ);
-+ if (err)
-+ ret = PCIBIOS_DEVICE_NOT_FOUND;
-+ else
-+ data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
-+
-+ spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
-+
-+ *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
-+
-+ return ret;
-+}
-+
-+static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 value)
-+{
-+ void __iomem *base = ar71xx_pcicfg_base;
-+ unsigned long flags;
-+ int err;
-+ int ret;
-+
-+ value = value << (8 * (where & 3));
-+ ret = PCIBIOS_SUCCESSFUL;
-+
-+ spin_lock_irqsave(&ar71xx_pci_lock, flags);
-+
-+ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
-+ AR71XX_PCI_CFG_CMD_WRITE);
-+ if (err)
-+ ret = PCIBIOS_DEVICE_NOT_FOUND;
-+ else
-+ __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
-+
-+ spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
-+
-+ return ret;
-+}
-+
-+static struct pci_ops ar71xx_pci_ops = {
-+ .read = ar71xx_pci_read_config,
-+ .write = ar71xx_pci_write_config,
-+};
-+
-+static struct resource ar71xx_pci_io_resource = {
-+ .name = "PCI IO space",
-+ .start = 0,
-+ .end = 0,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct resource ar71xx_pci_mem_resource = {
-+ .name = "PCI memory space",
-+ .start = AR71XX_PCI_MEM_BASE,
-+ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
-+ .flags = IORESOURCE_MEM
-+};
-+
-+static struct pci_controller ar71xx_pci_controller = {
-+ .pci_ops = &ar71xx_pci_ops,
-+ .mem_resource = &ar71xx_pci_mem_resource,
-+ .io_resource = &ar71xx_pci_io_resource,
-+};
-+
-+static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
-+{
-+ void __iomem *base = ath79_reset_base;
-+ u32 pending;
-+
-+ pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
-+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-+
-+ if (pending & AR71XX_PCI_INT_DEV0)
-+ generic_handle_irq(ATH79_PCI_IRQ(0));
-+
-+ else if (pending & AR71XX_PCI_INT_DEV1)
-+ generic_handle_irq(ATH79_PCI_IRQ(1));
-+
-+ else if (pending & AR71XX_PCI_INT_DEV2)
-+ generic_handle_irq(ATH79_PCI_IRQ(2));
-+
-+ else if (pending & AR71XX_PCI_INT_CORE)
-+ generic_handle_irq(ATH79_PCI_IRQ(4));
-+
-+ else
-+ spurious_interrupt();
-+}
-+
-+static void ar71xx_pci_irq_unmask(struct irq_data *d)
-+{
-+ unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
-+ void __iomem *base = ath79_reset_base;
-+ u32 t;
-+
-+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-+ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-+
-+ /* flush write */
-+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-+}
-+
-+static void ar71xx_pci_irq_mask(struct irq_data *d)
-+{
-+ unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
-+ void __iomem *base = ath79_reset_base;
-+ u32 t;
-+
-+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-+ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-+
-+ /* flush write */
-+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-+}
-+
-+static struct irq_chip ar71xx_pci_irq_chip = {
-+ .name = "AR71XX PCI",
-+ .irq_mask = ar71xx_pci_irq_mask,
-+ .irq_unmask = ar71xx_pci_irq_unmask,
-+ .irq_mask_ack = ar71xx_pci_irq_mask,
-+};
-+
-+static __init void ar71xx_pci_irq_init(void)
-+{
-+ void __iomem *base = ath79_reset_base;
-+ int i;
-+
-+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
-+
-+ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
-+
-+ for (i = ATH79_PCI_IRQ_BASE;
-+ i < ATH79_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
-+ handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
-+}
-+
-+static __init void ar71xx_pci_reset(void)
-+{
-+ void __iomem *ddr_base = ath79_ddr_base;
-+
-+ ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
-+ mdelay(100);
-+
-+ ath79_device_reset_clear(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
-+ mdelay(100);
-+
-+ __raw_writel(AR71XX_PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0);
-+ __raw_writel(AR71XX_PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1);
-+ __raw_writel(AR71XX_PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2);
-+ __raw_writel(AR71XX_PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3);
-+ __raw_writel(AR71XX_PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4);
-+ __raw_writel(AR71XX_PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5);
-+ __raw_writel(AR71XX_PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6);
-+ __raw_writel(AR71XX_PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7);
-+
-+ mdelay(100);
-+}
-+
-+__init int ar71xx_pcibios_init(void)
-+{
-+ u32 t;
-+
-+ ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE);
-+ if (ar71xx_pcicfg_base == NULL)
-+ return -ENOMEM;
-+
-+ ar71xx_pci_reset();
-+
-+ /* setup COMMAND register */
-+ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
-+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
-+ ar71xx_pci_local_write(PCI_COMMAND, 4, t);
-+
-+ /* clear bus errors */
-+ ar71xx_pci_check_error(1);
-+
-+ ar71xx_pci_irq_init();
-+
-+ register_pci_controller(&ar71xx_pci_controller);
-+
-+ return 0;
-+}
diff --git a/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch b/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch
deleted file mode 100644
index 7daaf19..0000000
--- a/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From fd1dd2f2c317bc0fc2c30fba440d911654bf592e Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:11 +0100
-Subject: [PATCH 20/47] MIPS: ath79: allow to use SoC specific PCI IRQ maps
-
-The PCI controllers in the AR71XX and in the
-AR724X SoCs are different, and both of them
-uses different IRQ wiring.
-
-The patch modifies the 'pcibios_map_irq' function
-in order to allow to use different IRQ maps for
-the different SoCs. The patch also adds a function,
-which lets the board setup code to override the
-default IRQ map.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3500/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/pci.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++---
- arch/mips/ath79/pci.h | 9 ++++++
- 2 files changed, 77 insertions(+), 4 deletions(-)
-
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -8,6 +8,7 @@
- * by the Free Software Foundation.
- */
-
-+#include <linux/init.h>
- #include <linux/pci.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/irq.h>
-@@ -15,9 +16,35 @@
- #include "pci.h"
-
- static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
-+static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
-+static unsigned ath79_pci_nr_irqs __initdata;
- static struct ar724x_pci_data *pci_data;
- static int pci_data_size;
-
-+static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
-+ {
-+ .slot = 17,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(0),
-+ }, {
-+ .slot = 18,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(1),
-+ }, {
-+ .slot = 19,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(2),
-+ }
-+};
-+
-+static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = {
-+ {
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(0),
-+ }
-+};
-+
- void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
- {
- pci_data = data;
-@@ -26,13 +53,40 @@ void ar724x_pci_add_data(struct ar724x_p
-
- int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
- {
-- unsigned int devfn = dev->devfn;
- int irq = -1;
-+ int i;
-
-- if (devfn > pci_data_size - 1)
-- return irq;
--
-- irq = pci_data[devfn].irq;
-+ if (ath79_pci_nr_irqs == 0 ||
-+ ath79_pci_irq_map == NULL) {
-+ if (soc_is_ar71xx()) {
-+ ath79_pci_irq_map = ar71xx_pci_irq_map;
-+ ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
-+ } else if (soc_is_ar724x()) {
-+ ath79_pci_irq_map = ar724x_pci_irq_map;
-+ ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
-+ } else {
-+ pr_crit("pci %s: invalid irq map\n",
-+ pci_name((struct pci_dev *) dev));
-+ return irq;
-+ }
-+ }
-+
-+ for (i = 0; i < ath79_pci_nr_irqs; i++) {
-+ const struct ath79_pci_irq *entry;
-+
-+ entry = &ath79_pci_irq_map[i];
-+ if (entry->slot == slot && entry->pin == pin) {
-+ irq = entry->irq;
-+ break;
-+ }
-+ }
-+
-+ if (irq < 0)
-+ pr_crit("pci %s: no irq found for pin %u\n",
-+ pci_name((struct pci_dev *) dev), pin);
-+ else
-+ pr_info("pci %s: using irq %d for pin %u\n",
-+ pci_name((struct pci_dev *) dev), irq, pin);
-
- return irq;
- }
-@@ -45,6 +99,13 @@ int pcibios_plat_dev_init(struct pci_dev
- return 0;
- }
-
-+void __init ath79_pci_set_irq_map(unsigned nr_irqs,
-+ const struct ath79_pci_irq *map)
-+{
-+ ath79_pci_nr_irqs = nr_irqs;
-+ ath79_pci_irq_map = map;
-+}
-+
- void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
- {
- ath79_pci_plat_dev_init = func;
-@@ -52,6 +113,9 @@ void __init ath79_pci_set_plat_dev_init(
-
- int __init ath79_register_pci(void)
- {
-+ if (soc_is_ar71xx())
-+ return ar71xx_pcibios_init();
-+
- if (soc_is_ar724x())
- return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
-
---- a/arch/mips/ath79/pci.h
-+++ b/arch/mips/ath79/pci.h
-@@ -15,13 +15,22 @@ struct ar724x_pci_data {
- int irq;
- };
-
-+struct ath79_pci_irq {
-+ u8 slot;
-+ u8 pin;
-+ int irq;
-+};
-+
- void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
-
- #ifdef CONFIG_PCI
-+void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
- void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
- int ath79_register_pci(void);
- #else
- static inline void
-+ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
-+static inline void
- ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
- static inline int ath79_register_pci(void) { return 0; }
- #endif
diff --git a/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-remove-ar724x_pci_add_data-function.patch b/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-remove-ar724x_pci_add_data-function.patch
deleted file mode 100644
index 70013c8..0000000
--- a/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-remove-ar724x_pci_add_data-function.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 29398cf1212afc9a6474127259cbb3a48d0751e5 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:12 +0100
-Subject: [PATCH 21/47] MIPS: ath79: remove ar724x_pci_add_data function
-
-The variables set by this function are not used anymore.
-Remove the function and the relevant variables as well.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3501/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/mach-ubnt-xm.c | 7 -------
- arch/mips/ath79/pci.c | 8 --------
- arch/mips/ath79/pci.h | 6 ------
- 3 files changed, 0 insertions(+), 21 deletions(-)
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -82,12 +82,6 @@ static struct ath79_spi_platform_data ub
- #ifdef CONFIG_PCI
- static struct ath9k_platform_data ubnt_xm_eeprom_data;
-
--static struct ar724x_pci_data ubnt_xm_pci_data[] = {
-- {
-- .irq = ATH79_PCI_IRQ(0),
-- },
--};
--
- static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
- {
- switch (PCI_SLOT(dev->devfn)) {
-@@ -104,7 +98,6 @@ static void __init ubnt_xm_pci_init(void
- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
- sizeof(ubnt_xm_eeprom_data.eeprom_data));
-
-- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
- ath79_register_pci();
- }
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -18,8 +18,6 @@
- static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
- static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
- static unsigned ath79_pci_nr_irqs __initdata;
--static struct ar724x_pci_data *pci_data;
--static int pci_data_size;
-
- static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
- {
-@@ -45,12 +43,6 @@ static const struct ath79_pci_irq ar724x
- }
- };
-
--void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
--{
-- pci_data = data;
-- pci_data_size = size;
--}
--
- int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
- {
- int irq = -1;
---- a/arch/mips/ath79/pci.h
-+++ b/arch/mips/ath79/pci.h
-@@ -11,18 +11,12 @@
- #ifndef _ATH79_PCI_H
- #define _ATH79_PCI_H
-
--struct ar724x_pci_data {
-- int irq;
--};
--
- struct ath79_pci_irq {
- u8 slot;
- u8 pin;
- int irq;
- };
-
--void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
--
- #ifdef CONFIG_PCI
- void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
- void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
diff --git a/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch b/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch
deleted file mode 100644
index 969b79d..0000000
--- a/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 12db6a98b438a50799873bfd2b736a3b02a4bd57 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:13 +0100
-Subject: [PATCH 22/47] MIPS: ath79: register PCI controller on the PB44 board
-
-The PB44 reference board has two miniPCI slots. Register
-the PCI controller to make those usable.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3502/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/mach-pb44.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/mach-pb44.c
-+++ b/arch/mips/ath79/mach-pb44.c
-@@ -19,6 +19,7 @@
- #include "dev-leds-gpio.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
-+#include "pci.h"
-
- #define PB44_GPIO_I2C_SCL 0
- #define PB44_GPIO_I2C_SDA 1
-@@ -114,6 +115,7 @@ static void __init pb44_init(void)
- ath79_register_spi(&pb44_spi_data, pb44_spi_info,
- ARRAY_SIZE(pb44_spi_info));
- ath79_register_usb();
-+ ath79_register_pci();
- }
-
- MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
diff --git a/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch b/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch
deleted file mode 100644
index da173a5..0000000
--- a/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From d3b5329b89d1bc733c56e4d609a89b429bf6cd4e Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:36:14 +0100
-Subject: [PATCH 23/47] MIPS: ath79: update copyright headers of PCI related files
-
-Add copyright records according to the recent changes in
-the PCI code. Also fix up the descriptions.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/3503/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/pci.c | 4 ++++
- arch/mips/ath79/pci.h | 4 +++-
- arch/mips/include/asm/mach-ath79/pci.h | 4 +++-
- arch/mips/pci/pci-ar724x.c | 3 ++-
- 4 files changed, 12 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -2,6 +2,10 @@
- * Atheros AR71XX/AR724X specific PCI setup code
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
---- a/arch/mips/ath79/pci.h
-+++ b/arch/mips/ath79/pci.h
-@@ -1,7 +1,9 @@
- /*
-- * Atheros 724x PCI support
-+ * Atheros AR71XX/AR724X PCI support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
---- a/arch/mips/include/asm/mach-ath79/pci.h
-+++ b/arch/mips/include/asm/mach-ath79/pci.h
-@@ -1,7 +1,9 @@
- /*
-- * Atheros 724x PCI support
-+ * Atheros AR71XX/AR724X PCI support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -1,7 +1,8 @@
- /*
-- * Atheros 724x PCI support
-+ * Atheros AR724X PCI host controller driver
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
diff --git a/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-add-early_printk-support-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-add-early_printk-support-for-AR934X.patch
deleted file mode 100644
index 512f2da..0000000
--- a/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-add-early_printk-support-for-AR934X.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 5c1f1041309ede56d48eb3c665025e87c9824a64 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:19 +0100
-Subject: [PATCH 24/47] MIPS: ath79: add early_printk support for AR934X
-
-The patch allows to see kernel messages on AR934X SoCs in
-early boot stage.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3504/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/early_printk.c | 3 +++
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 6 +++++-
- 2 files changed, 8 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -71,6 +71,9 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_AR7241:
- case REV_ID_MAJOR_AR7242:
- case REV_ID_MAJOR_AR913X:
-+ case REV_ID_MAJOR_AR9341:
-+ case REV_ID_MAJOR_AR9342:
-+ case REV_ID_MAJOR_AR9344:
- _prom_putchar = prom_putchar_ar71xx;
- break;
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1,10 +1,11 @@
- /*
- * Atheros AR71XX/AR724X/AR913X SoC register definitions
- *
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
-@@ -249,6 +250,9 @@
- #define REV_ID_MAJOR_AR7242 0x1100
- #define REV_ID_MAJOR_AR9330 0x0110
- #define REV_ID_MAJOR_AR9331 0x1110
-+#define REV_ID_MAJOR_AR9341 0x0120
-+#define REV_ID_MAJOR_AR9342 0x1120
-+#define REV_ID_MAJOR_AR9344 0x2120
-
- #define AR71XX_REV_ID_MINOR_MASK 0x3
- #define AR71XX_REV_ID_MINOR_AR7130 0x0
diff --git a/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch b/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch
deleted file mode 100644
index afbb04e..0000000
--- a/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From ccb089bbbe49949063cc348743605b3d813ca1c0 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:20 +0100
-Subject: [PATCH 25/47] MIPS: ath79: sort case statements in ath79_detect_sys_type
-
-Sort the case statements alphabetically in order to improve
-readability.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3505/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/setup.c | 24 ++++++++++++------------
- 1 files changed, 12 insertions(+), 12 deletions(-)
-
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -116,18 +116,6 @@ static void __init ath79_detect_sys_type
- rev = id & AR724X_REV_ID_REVISION_MASK;
- break;
-
-- case REV_ID_MAJOR_AR9330:
-- ath79_soc = ATH79_SOC_AR9330;
-- chip = "9330";
-- rev = id & AR933X_REV_ID_REVISION_MASK;
-- break;
--
-- case REV_ID_MAJOR_AR9331:
-- ath79_soc = ATH79_SOC_AR9331;
-- chip = "9331";
-- rev = id & AR933X_REV_ID_REVISION_MASK;
-- break;
--
- case REV_ID_MAJOR_AR913X:
- minor = id & AR913X_REV_ID_MINOR_MASK;
- rev = id >> AR913X_REV_ID_REVISION_SHIFT;
-@@ -145,6 +133,18 @@ static void __init ath79_detect_sys_type
- }
- break;
-
-+ case REV_ID_MAJOR_AR9330:
-+ ath79_soc = ATH79_SOC_AR9330;
-+ chip = "9330";
-+ rev = id & AR933X_REV_ID_REVISION_MASK;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9331:
-+ ath79_soc = ATH79_SOC_AR9331;
-+ chip = "9331";
-+ rev = id & AR933X_REV_ID_REVISION_MASK;
-+ break;
-+
- default:
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
diff --git a/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch
deleted file mode 100644
index 59bb3d8..0000000
--- a/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From bf5cb424312f28e51803286a53cb8613bedc5bc8 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:21 +0100
-Subject: [PATCH 26/47] MIPS: ath79: add SoC detection code for AR934X
-
-Also add 'soc_is_ar934[124x]' helper functions and a Kconfig
-symbol for the AR934X SoCs.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3506/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/Kconfig | 4 ++++
- arch/mips/ath79/setup.c | 21 ++++++++++++++++++++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
- arch/mips/include/asm/mach-ath79/ath79.h | 23 +++++++++++++++++++++++
- 4 files changed, 49 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -69,6 +69,10 @@ config SOC_AR933X
- select USB_ARCH_HAS_EHCI
- def_bool n
-
-+config SOC_AR934X
-+ select USB_ARCH_HAS_EHCI
-+ def_bool n
-+
- config ATH79_DEV_GPIO_BUTTONS
- def_bool n
-
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -1,10 +1,11 @@
- /*
- * Atheros AR71XX/AR724X/AR913X specific setup
- *
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
-@@ -145,6 +146,24 @@ static void __init ath79_detect_sys_type
- rev = id & AR933X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_AR9341:
-+ ath79_soc = ATH79_SOC_AR9341;
-+ chip = "9341";
-+ rev = id & AR934X_REV_ID_REVISION_MASK;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9342:
-+ ath79_soc = ATH79_SOC_AR9342;
-+ chip = "9342";
-+ rev = id & AR934X_REV_ID_REVISION_MASK;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9344:
-+ ath79_soc = ATH79_SOC_AR9344;
-+ chip = "9344";
-+ rev = id & AR934X_REV_ID_REVISION_MASK;
-+ break;
-+
- default:
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -271,6 +271,8 @@
-
- #define AR724X_REV_ID_REVISION_MASK 0x3
-
-+#define AR934X_REV_ID_REVISION_MASK 0xf
-+
- /*
- * SPI block
- */
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -29,6 +29,9 @@ enum ath79_soc_type {
- ATH79_SOC_AR9132,
- ATH79_SOC_AR9330,
- ATH79_SOC_AR9331,
-+ ATH79_SOC_AR9341,
-+ ATH79_SOC_AR9342,
-+ ATH79_SOC_AR9344,
- };
-
- extern enum ath79_soc_type ath79_soc;
-@@ -75,6 +78,26 @@ static inline int soc_is_ar933x(void)
- ath79_soc == ATH79_SOC_AR9331);
- }
-
-+static inline int soc_is_ar9341(void)
-+{
-+ return (ath79_soc == ATH79_SOC_AR9341);
-+}
-+
-+static inline int soc_is_ar9342(void)
-+{
-+ return (ath79_soc == ATH79_SOC_AR9342);
-+}
-+
-+static inline int soc_is_ar9344(void)
-+{
-+ return (ath79_soc == ATH79_SOC_AR9344);
-+}
-+
-+static inline int soc_is_ar934x(void)
-+{
-+ return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
-+}
-+
- extern void __iomem *ath79_ddr_base;
- extern void __iomem *ath79_pll_base;
- extern void __iomem *ath79_reset_base;
diff --git a/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch
deleted file mode 100644
index 39e161c..0000000
--- a/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From e9706fc0a97feb7992a98806b69a1fc1fcb910c7 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:22 +0100
-Subject: [PATCH 27/47] MIPS: ath79: add clock initialization code for AR934X
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3507/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/clock.c | 81 ++++++++++++++++++++++++
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 53 +++++++++++++++
- 2 files changed, 134 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -1,8 +1,11 @@
- /*
- * Atheros AR71XX/AR724X/AR913X common routines
- *
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
-+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-+ *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-@@ -163,6 +166,82 @@ static void __init ar933x_clocks_init(vo
- ath79_uart_clk.rate = ath79_ref_clk.rate;
- }
-
-+static void __init ar934x_clocks_init(void)
-+{
-+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
-+ ath79_ref_clk.rate = 40 * 1000 * 1000;
-+ else
-+ ath79_ref_clk.rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
-+ nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
-+ AR934X_PLL_CPU_CONFIG_NINT_MASK;
-+ frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-+ AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
-+
-+ cpu_pll = nint * ath79_ref_clk.rate / ref_div;
-+ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
-+ AR934X_PLL_DDR_CONFIG_NINT_MASK;
-+ frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-+ AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
-+
-+ ddr_pll = nint * ath79_ref_clk.rate / ref_div;
-+ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
-+ ath79_cpu_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-+ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
-+ else
-+ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
-+ ath79_ddr_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-+ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
-+ else
-+ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
-+ ath79_ahb_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
-+ else
-+ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_wdt_clk.rate = ath79_ref_clk.rate;
-+ ath79_uart_clk.rate = ath79_ref_clk.rate;
-+}
-+
- void __init ath79_clocks_init(void)
- {
- if (soc_is_ar71xx())
-@@ -173,6 +252,8 @@ void __init ath79_clocks_init(void)
- ar913x_clocks_init();
- else if (soc_is_ar933x())
- ar933x_clocks_init();
-+ else if (soc_is_ar934x())
-+ ar934x_clocks_init();
- else
- BUG();
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -151,6 +151,41 @@
- #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15
- #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7
-
-+#define AR934X_PLL_CPU_CONFIG_REG 0x00
-+#define AR934X_PLL_DDR_CONFIG_REG 0x04
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
-+
-+#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-+#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-+#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6
-+#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-+#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
-+
-+#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-+#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-+#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10
-+#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-+#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
- /*
- * USB_CONFIG block
- */
-@@ -186,6 +221,8 @@
- #define AR933X_RESET_REG_RESET_MODULE 0x1c
- #define AR933X_RESET_REG_BOOTSTRAP 0xac
-
-+#define AR934X_RESET_REG_BOOTSTRAP 0xb0
-+
- #define MISC_INT_ETHSW BIT(12)
- #define MISC_INT_TIMER4 BIT(10)
- #define MISC_INT_TIMER3 BIT(9)
-@@ -242,6 +279,22 @@
-
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
-+#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-+#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22)
-+#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21)
-+#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20)
-+#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19)
-+#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18)
-+#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17)
-+#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16)
-+#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7)
-+#define AR934X_BOOTSTRAP_PCIE_RC BIT(6)
-+#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5)
-+#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4)
-+#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2)
-+#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
-+#define AR934X_BOOTSTRAP_DDR1 BIT(0)
-+
- #define REV_ID_MAJOR_MASK 0xfff0
- #define REV_ID_MAJOR_AR71XX 0x00a0
- #define REV_ID_MAJOR_AR913X 0x00b0
diff --git a/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch
deleted file mode 100644
index 77c8d5a..0000000
--- a/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 77bb01d1919bcb6787d5cde9056936420288ab34 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:23 +0100
-Subject: [PATCH 28/47] MIPS: ath79: add GPIO support code for AR934X
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3508/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/gpio.c | 47 +++++++++++++++++++++++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
- 2 files changed, 47 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -1,9 +1,12 @@
- /*
- * Atheros AR71XX/AR724X/AR913X GPIO API support
- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
-+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-+ *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-@@ -89,6 +92,42 @@ static int ath79_gpio_direction_output(s
- return 0;
- }
-
-+static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+ void __iomem *base = ath79_gpio_base;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ath79_gpio_lock, flags);
-+
-+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset),
-+ base + AR71XX_GPIO_REG_OE);
-+
-+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-+ int value)
-+{
-+ void __iomem *base = ath79_gpio_base;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ath79_gpio_lock, flags);
-+
-+ if (value)
-+ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET);
-+ else
-+ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR);
-+
-+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset),
-+ base + AR71XX_GPIO_REG_OE);
-+
-+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
-+
-+ return 0;
-+}
-+
- static struct gpio_chip ath79_gpio_chip = {
- .label = "ath79",
- .get = ath79_gpio_get_value,
-@@ -155,11 +194,17 @@ void __init ath79_gpio_init(void)
- ath79_gpio_count = AR913X_GPIO_COUNT;
- else if (soc_is_ar933x())
- ath79_gpio_count = AR933X_GPIO_COUNT;
-+ else if (soc_is_ar934x())
-+ ath79_gpio_count = AR934X_GPIO_COUNT;
- else
- BUG();
-
- ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
- ath79_gpio_chip.ngpio = ath79_gpio_count;
-+ if (soc_is_ar934x()) {
-+ ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
-+ ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
-+ }
-
- err = gpiochip_add(&ath79_gpio_chip);
- if (err)
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -367,5 +367,6 @@
- #define AR724X_GPIO_COUNT 18
- #define AR913X_GPIO_COUNT 22
- #define AR933X_GPIO_COUNT 30
-+#define AR934X_GPIO_COUNT 23
-
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch b/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch
deleted file mode 100644
index 0f30d38..0000000
--- a/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From f44c70eb5368c0742a8f401ccf39f2ba7252f5a7 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:24 +0100
-Subject: [PATCH 29/47] MIPS: ath79: rework IP2/IP3 interrupt handling
-
-The current implementation assumes that flushing the
-DDR writeback buffer is required for IP2/IP3 interrupts,
-however this is not true for all SoCs.
-
-Use SoC specific IP2/IP3 handlers instead of flushing
-the buffers in the dispatcher code.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3509/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/irq.c | 92 ++++++++++++++++++++++++++++++++++++++-----------
- 1 files changed, 72 insertions(+), 20 deletions(-)
-
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -1,7 +1,7 @@
- /*
- * Atheros AR71xx/AR724x/AR913x specific interrupt handling
- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
-@@ -23,8 +23,8 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
-
--static unsigned int ath79_ip2_flush_reg;
--static unsigned int ath79_ip3_flush_reg;
-+static void (*ath79_ip2_handler)(void);
-+static void (*ath79_ip3_handler)(void);
-
- static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
- {
-@@ -152,10 +152,8 @@ asmlinkage void plat_irq_dispatch(void)
- if (pending & STATUSF_IP7)
- do_IRQ(ATH79_CPU_IRQ_TIMER);
-
-- else if (pending & STATUSF_IP2) {
-- ath79_ddr_wb_flush(ath79_ip2_flush_reg);
-- do_IRQ(ATH79_CPU_IRQ_IP2);
-- }
-+ else if (pending & STATUSF_IP2)
-+ ath79_ip2_handler();
-
- else if (pending & STATUSF_IP4)
- do_IRQ(ATH79_CPU_IRQ_GE0);
-@@ -163,10 +161,8 @@ asmlinkage void plat_irq_dispatch(void)
- else if (pending & STATUSF_IP5)
- do_IRQ(ATH79_CPU_IRQ_GE1);
-
-- else if (pending & STATUSF_IP3) {
-- ath79_ddr_wb_flush(ath79_ip3_flush_reg);
-- do_IRQ(ATH79_CPU_IRQ_USB);
-- }
-+ else if (pending & STATUSF_IP3)
-+ ath79_ip3_handler();
-
- else if (pending & STATUSF_IP6)
- do_IRQ(ATH79_CPU_IRQ_MISC);
-@@ -175,22 +171,78 @@ asmlinkage void plat_irq_dispatch(void)
- spurious_interrupt();
- }
-
-+/*
-+ * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
-+ * these devices typically allocate coherent DMA memory, however the
-+ * DMA controller may still have some unsynchronized data in the FIFO.
-+ * Issue a flush in the handlers to ensure that the driver sees
-+ * the update.
-+ */
-+static void ar71xx_ip2_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
-+ do_IRQ(ATH79_CPU_IRQ_IP2);
-+}
-+
-+static void ar724x_ip2_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE);
-+ do_IRQ(ATH79_CPU_IRQ_IP2);
-+}
-+
-+static void ar913x_ip2_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC);
-+ do_IRQ(ATH79_CPU_IRQ_IP2);
-+}
-+
-+static void ar933x_ip2_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC);
-+ do_IRQ(ATH79_CPU_IRQ_IP2);
-+}
-+
-+static void ar71xx_ip3_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
-+ do_IRQ(ATH79_CPU_IRQ_USB);
-+}
-+
-+static void ar724x_ip3_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB);
-+ do_IRQ(ATH79_CPU_IRQ_USB);
-+}
-+
-+static void ar913x_ip3_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB);
-+ do_IRQ(ATH79_CPU_IRQ_USB);
-+}
-+
-+static void ar933x_ip3_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB);
-+ do_IRQ(ATH79_CPU_IRQ_USB);
-+}
-+
- void __init arch_init_irq(void)
- {
- if (soc_is_ar71xx()) {
-- ath79_ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI;
-- ath79_ip3_flush_reg = AR71XX_DDR_REG_FLUSH_USB;
-+ ath79_ip2_handler = ar71xx_ip2_handler;
-+ ath79_ip3_handler = ar71xx_ip3_handler;
- } else if (soc_is_ar724x()) {
-- ath79_ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE;
-- ath79_ip3_flush_reg = AR724X_DDR_REG_FLUSH_USB;
-+ ath79_ip2_handler = ar724x_ip2_handler;
-+ ath79_ip3_handler = ar724x_ip3_handler;
- } else if (soc_is_ar913x()) {
-- ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC;
-- ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB;
-+ ath79_ip2_handler = ar913x_ip2_handler;
-+ ath79_ip3_handler = ar913x_ip3_handler;
- } else if (soc_is_ar933x()) {
-- ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC;
-- ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB;
-- } else
-+ ath79_ip2_handler = ar933x_ip2_handler;
-+ ath79_ip3_handler = ar933x_ip3_handler;
-+ } else {
- BUG();
-+ }
-
- cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
- mips_cpu_irq_init();
diff --git a/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch
deleted file mode 100644
index 1268077..0000000
--- a/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-From b16fdecf14d24fe213c81409c0c2dca66d5b7bc9 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:25 +0100
-Subject: [PATCH 30/47] MIPS: ath79: add IRQ handling code for AR934X
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3510/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/irq.c | 55 +++++++++++++++++++++++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 25 +++++++++++
- arch/mips/include/asm/mach-ath79/irq.h | 6 ++-
- 3 files changed, 83 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -1,10 +1,11 @@
- /*
- * Atheros AR71xx/AR724x/AR913x specific interrupt handling
- *
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
-@@ -129,7 +130,7 @@ static void __init ath79_misc_irq_init(v
-
- if (soc_is_ar71xx() || soc_is_ar913x())
- ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-- else if (soc_is_ar724x() || soc_is_ar933x())
-+ else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
- ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
- else
- BUG();
-@@ -143,6 +144,39 @@ static void __init ath79_misc_irq_init(v
- irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler);
- }
-
-+static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ disable_irq_nosync(irq);
-+
-+ status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
-+
-+ if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
-+ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_PCIE);
-+ generic_handle_irq(ATH79_IP2_IRQ(0));
-+ } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
-+ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_WMAC);
-+ generic_handle_irq(ATH79_IP2_IRQ(1));
-+ } else {
-+ spurious_interrupt();
-+ }
-+
-+ enable_irq(irq);
-+}
-+
-+static void ar934x_ip2_irq_init(void)
-+{
-+ int i;
-+
-+ for (i = ATH79_IP2_IRQ_BASE;
-+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip,
-+ handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
-+}
-+
- asmlinkage void plat_irq_dispatch(void)
- {
- unsigned long pending;
-@@ -202,6 +236,11 @@ static void ar933x_ip2_handler(void)
- do_IRQ(ATH79_CPU_IRQ_IP2);
- }
-
-+static void ar934x_ip2_handler(void)
-+{
-+ do_IRQ(ATH79_CPU_IRQ_IP2);
-+}
-+
- static void ar71xx_ip3_handler(void)
- {
- ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
-@@ -226,6 +265,12 @@ static void ar933x_ip3_handler(void)
- do_IRQ(ATH79_CPU_IRQ_USB);
- }
-
-+static void ar934x_ip3_handler(void)
-+{
-+ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB);
-+ do_IRQ(ATH79_CPU_IRQ_USB);
-+}
-+
- void __init arch_init_irq(void)
- {
- if (soc_is_ar71xx()) {
-@@ -240,6 +285,9 @@ void __init arch_init_irq(void)
- } else if (soc_is_ar933x()) {
- ath79_ip2_handler = ar933x_ip2_handler;
- ath79_ip3_handler = ar933x_ip3_handler;
-+ } else if (soc_is_ar934x()) {
-+ ath79_ip2_handler = ar934x_ip2_handler;
-+ ath79_ip3_handler = ar934x_ip3_handler;
- } else {
- BUG();
- }
-@@ -247,4 +295,7 @@ void __init arch_init_irq(void)
- cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
- mips_cpu_irq_init();
- ath79_misc_irq_init();
-+
-+ if (soc_is_ar934x())
-+ ar934x_ip2_irq_init();
- }
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -92,6 +92,12 @@
- #define AR933X_DDR_REG_FLUSH_USB 0x84
- #define AR933X_DDR_REG_FLUSH_WMAC 0x88
-
-+#define AR934X_DDR_REG_FLUSH_GE0 0x9c
-+#define AR934X_DDR_REG_FLUSH_GE1 0xa0
-+#define AR934X_DDR_REG_FLUSH_USB 0xa4
-+#define AR934X_DDR_REG_FLUSH_PCIE 0xa8
-+#define AR934X_DDR_REG_FLUSH_WMAC 0xac
-+
- /*
- * PLL block
- */
-@@ -222,6 +228,7 @@
- #define AR933X_RESET_REG_BOOTSTRAP 0xac
-
- #define AR934X_RESET_REG_BOOTSTRAP 0xb0
-+#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
- #define MISC_INT_ETHSW BIT(12)
- #define MISC_INT_TIMER4 BIT(10)
-@@ -295,6 +302,24 @@
- #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
- #define AR934X_BOOTSTRAP_DDR1 BIT(0)
-
-+#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-+#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
-+#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-+#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
-+#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4)
-+#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
-+#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
-+#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
-+#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
-+#define AR934X_PCIE_WMAC_INT_WMAC_ALL \
-+ (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \
-+ AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP)
-+
-+#define AR934X_PCIE_WMAC_INT_PCIE_ALL \
-+ (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \
-+ AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
-+ AR934X_PCIE_WMAC_INT_PCIE_RC3)
-+
- #define REV_ID_MAJOR_MASK 0xfff0
- #define REV_ID_MAJOR_AR71XX 0x00a0
- #define REV_ID_MAJOR_AR913X 0x00b0
---- a/arch/mips/include/asm/mach-ath79/irq.h
-+++ b/arch/mips/include/asm/mach-ath79/irq.h
-@@ -10,7 +10,7 @@
- #define __ASM_MACH_ATH79_IRQ_H
-
- #define MIPS_CPU_IRQ_BASE 0
--#define NR_IRQS 46
-+#define NR_IRQS 48
-
- #define ATH79_MISC_IRQ_BASE 8
- #define ATH79_MISC_IRQ_COUNT 32
-@@ -19,6 +19,10 @@
- #define ATH79_PCI_IRQ_COUNT 6
- #define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x))
-
-+#define ATH79_IP2_IRQ_BASE (ATH79_PCI_IRQ_BASE + ATH79_PCI_IRQ_COUNT)
-+#define ATH79_IP2_IRQ_COUNT 2
-+#define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x))
-+
- #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
- #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
- #define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
diff --git a/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch b/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch
deleted file mode 100644
index 14d4a27..0000000
--- a/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 98bfbb0b3f126d93076377fcd9553a493e45e304 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:26 +0100
-Subject: [PATCH 31/47] MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set}
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3511/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/common.c | 9 ++++++++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
- 2 files changed, 9 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -1,9 +1,12 @@
- /*
- * Atheros AR71XX/AR724X/AR913X common routines
- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
-+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-+ *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-@@ -67,6 +70,8 @@ void ath79_device_reset_set(u32 mask)
- reg = AR913X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar933x())
- reg = AR933X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_RESET_REG_RESET_MODULE;
- else
- BUG();
-
-@@ -91,6 +96,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = AR913X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar933x())
- reg = AR933X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_RESET_REG_RESET_MODULE;
- else
- BUG();
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -227,6 +227,7 @@
- #define AR933X_RESET_REG_RESET_MODULE 0x1c
- #define AR933X_RESET_REG_BOOTSTRAP 0xac
-
-+#define AR934X_RESET_REG_RESET_MODULE 0x1c
- #define AR934X_RESET_REG_BOOTSTRAP 0xb0
- #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
diff --git a/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch b/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch
deleted file mode 100644
index 2c7eeca..0000000
--- a/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 2d4ed1c7405d05da812b67830eaac15f43b862b7 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:27 +0100
-Subject: [PATCH 32/47] MIPS: ath79: register UART device for AR934X SoCs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3512/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/dev-common.c | 3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -89,7 +89,8 @@ void __init ath79_register_uart(void)
-
- if (soc_is_ar71xx() ||
- soc_is_ar724x() ||
-- soc_is_ar913x()) {
-+ soc_is_ar913x() ||
-+ soc_is_ar934x()) {
- ath79_uart_data[0].uartclk = clk_get_rate(clk);
- platform_device_register(&ath79_uart_device);
- } else if (soc_is_ar933x()) {
diff --git a/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch
deleted file mode 100644
index adbe3e4..0000000
--- a/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From d677877e2688813e5e0c12d0228a631021ed70c4 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:28 +0100
-Subject: [PATCH 33/47] MIPS: ath79: add WMAC registration code for AR934X
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3513/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/Kconfig | 2 +-
- arch/mips/ath79/dev-wmac.c | 30 ++++++++++++++++++++++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++
- 3 files changed, 32 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -86,7 +86,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
- def_bool n
-
- endif
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -1,9 +1,12 @@
- /*
- * Atheros AR913X/AR933X SoC built-in WMAC device support
- *
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
-+ * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
-+ *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-@@ -26,8 +29,7 @@ static struct resource ath79_wmac_resour
- /* .start and .end fields are filled dynamically */
- .flags = IORESOURCE_MEM,
- }, {
-- .start = ATH79_CPU_IRQ_IP2,
-- .end = ATH79_CPU_IRQ_IP2,
-+ /* .start and .end fields are filled dynamically */
- .flags = IORESOURCE_IRQ,
- },
- };
-@@ -53,6 +55,8 @@ static void __init ar913x_wmac_setup(voi
-
- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
-+ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
- }
-
-
-@@ -79,6 +83,8 @@ static void __init ar933x_wmac_setup(voi
-
- ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
-+ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-@@ -92,12 +98,32 @@ static void __init ar933x_wmac_setup(voi
- ath79_wmac_data.external_reset = ar933x_wmac_reset;
- }
-
-+static void ar934x_wmac_setup(void)
-+{
-+ u32 t;
-+
-+ ath79_wmac_device.name = "ar934x_wmac";
-+
-+ ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
-+ ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-+
-+ t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-+ if (t & AR934X_BOOTSTRAP_REF_CLK_40)
-+ ath79_wmac_data.is_clk_25mhz = false;
-+ else
-+ ath79_wmac_data.is_clk_25mhz = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data)
- {
- if (soc_is_ar913x())
- ar913x_wmac_setup();
- else if (soc_is_ar933x())
- ar933x_wmac_setup();
-+ else if (soc_is_ar934x())
-+ ar934x_wmac_setup();
- else
- BUG();
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -61,6 +61,9 @@
- #define AR933X_EHCI_BASE 0x1b000000
- #define AR933X_EHCI_SIZE 0x1000
-
-+#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define AR934X_WMAC_SIZE 0x20000
-+
- /*
- * DDR_CTRL block
- */
diff --git a/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch b/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch
deleted file mode 100644
index 27a46e6..0000000
--- a/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 27a5b2948831f4fd8e66e2e1a98b4c23902728cc Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:29 +0100
-Subject: [PATCH 34/47] MIPS: ath79: add PCI_AR724X Kconfig symbol
-
-The AR724X specific PCI code can be used for the
-AR934X SoCs, however it can be selected only if
-SOC_AR724X is set.
-
-Introduce a new Kconfig symbol in order to be able
-to use the code for AR934X as well.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3514/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/Kconfig | 4 ++++
- arch/mips/include/asm/mach-ath79/pci.h | 2 +-
- arch/mips/pci/Makefile | 2 +-
- 3 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -59,6 +59,7 @@ config SOC_AR724X
- select USB_ARCH_HAS_EHCI
- select USB_ARCH_HAS_OHCI
- select HW_HAS_PCI
-+ select PCI_AR724X if PCI
- def_bool n
-
- config SOC_AR913X
-@@ -73,6 +74,9 @@ config SOC_AR934X
- select USB_ARCH_HAS_EHCI
- def_bool n
-
-+config PCI_AR724X
-+ def_bool n
-+
- config ATH79_DEV_GPIO_BUTTONS
- def_bool n
-
---- a/arch/mips/include/asm/mach-ath79/pci.h
-+++ b/arch/mips/include/asm/mach-ath79/pci.h
-@@ -19,7 +19,7 @@ int ar71xx_pcibios_init(void);
- static inline int ar71xx_pcibios_init(void) { return 0; }
- #endif
-
--#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
-+#if defined(CONFIG_PCI_AR724X)
- int ar724x_pcibios_init(int irq);
- #else
- static inline int ar724x_pcibios_init(int irq) { return 0; }
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -20,7 +20,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
- ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
- obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
--obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
-+obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch
deleted file mode 100644
index bd9386d..0000000
--- a/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 902b348cdddd4c858993e02aced615aa6caf04d0 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 10:45:30 +0100
-Subject: [PATCH 35/47] MIPS: ath79: add PCI registration code for AR934X
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3516/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/Kconfig | 2 ++
- arch/mips/ath79/pci.c | 13 ++++++++++++-
- 2 files changed, 14 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -72,6 +72,8 @@ config SOC_AR933X
-
- config SOC_AR934X
- select USB_ARCH_HAS_EHCI
-+ select HW_HAS_PCI
-+ select PCI_AR724X if PCI
- def_bool n
-
- config PCI_AR724X
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -14,6 +14,7 @@
-
- #include <linux/init.h>
- #include <linux/pci.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/irq.h>
- #include <asm/mach-ath79/pci.h>
-@@ -57,7 +58,9 @@ int __init pcibios_map_irq(const struct
- if (soc_is_ar71xx()) {
- ath79_pci_irq_map = ar71xx_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
-- } else if (soc_is_ar724x()) {
-+ } else if (soc_is_ar724x() ||
-+ soc_is_ar9342() ||
-+ soc_is_ar9344()) {
- ath79_pci_irq_map = ar724x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
- } else {
-@@ -115,5 +118,13 @@ int __init ath79_register_pci(void)
- if (soc_is_ar724x())
- return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
-
-+ if (soc_is_ar9342() || soc_is_ar9344()) {
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
-+ return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
-+ }
-+
- return -ENODEV;
- }
diff --git a/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch b/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch
deleted file mode 100644
index 30c2c1b..0000000
--- a/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From 4921cb7d9f6997b6f7aefd37c7cfd50324e8fd75 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Mar 2012 20:39:35 +0100
-Subject: [PATCH 36/47] MIPS: ath79: add initial support for the Atheros DB120 board
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
-Cc: linux-mips@linux-mips.org
-Cc: mcgrof@infradead.org
-Patchwork: https://patchwork.linux-mips.org/patch/3517/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/ath79/Kconfig | 12 ++++
- arch/mips/ath79/Makefile | 1 +
- arch/mips/ath79/mach-db120.c | 134 ++++++++++++++++++++++++++++++++++++++++++
- arch/mips/ath79/machtypes.h | 1 +
- 4 files changed, 148 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/ath79/mach-db120.c
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -26,6 +26,18 @@ config ATH79_MACH_AP81
- Say 'Y' here if you want your kernel to support the
- Atheros AP81 reference board.
-
-+config ATH79_MACH_DB120
-+ bool "Atheros DB120 reference board"
-+ select SOC_AR934X
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_SPI
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Atheros DB120 reference board.
-+
- config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -28,5 +28,6 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wma
- #
- obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
- obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
-+obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
- obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
- obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
---- /dev/null
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -0,0 +1,134 @@
-+/*
-+ * Atheros DB120 reference board support
-+ *
-+ * Copyright (c) 2011 Qualcomm Atheros
-+ * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include "machtypes.h"
-+#include "dev-gpio-buttons.h"
-+#include "dev-leds-gpio.h"
-+#include "dev-spi.h"
-+#include "dev-wmac.h"
-+#include "pci.h"
-+
-+#define DB120_GPIO_LED_WLAN_5G 12
-+#define DB120_GPIO_LED_WLAN_2G 13
-+#define DB120_GPIO_LED_STATUS 14
-+#define DB120_GPIO_LED_WPS 15
-+
-+#define DB120_GPIO_BTN_WPS 16
-+
-+#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
-+#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-+
-+#define DB120_WMAC_CALDATA_OFFSET 0x1000
-+#define DB120_PCIE_CALDATA_OFFSET 0x5000
-+
-+static struct gpio_led db120_leds_gpio[] __initdata = {
-+ {
-+ .name = "db120:green:status",
-+ .gpio = DB120_GPIO_LED_STATUS,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "db120:green:wps",
-+ .gpio = DB120_GPIO_LED_WPS,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "db120:green:wlan-5g",
-+ .gpio = DB120_GPIO_LED_WLAN_5G,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "db120:green:wlan-2g",
-+ .gpio = DB120_GPIO_LED_WLAN_2G,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-+ {
-+ .desc = "WPS button",
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = DB120_GPIO_BTN_WPS,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct spi_board_info db120_spi_info[] = {
-+ {
-+ .bus_num = 0,
-+ .chip_select = 0,
-+ .max_speed_hz = 25000000,
-+ .modalias = "s25sl064a",
-+ }
-+};
-+
-+static struct ath79_spi_platform_data db120_spi_data = {
-+ .bus_num = 0,
-+ .num_chipselect = 1,
-+};
-+
-+#ifdef CONFIG_PCI
-+static struct ath9k_platform_data db120_ath9k_data;
-+
-+static int db120_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ switch (PCI_SLOT(dev->devfn)) {
-+ case 0:
-+ dev->dev.platform_data = &db120_ath9k_data;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __init db120_pci_init(u8 *eeprom)
-+{
-+ memcpy(db120_ath9k_data.eeprom_data, eeprom,
-+ sizeof(db120_ath9k_data.eeprom_data));
-+
-+ ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
-+ ath79_register_pci();
-+}
-+#else
-+static inline void db120_pci_init(void) {}
-+#endif /* CONFIG_PCI */
-+
-+static void __init db120_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
-+ db120_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(db120_gpio_keys),
-+ db120_gpio_keys);
-+ ath79_register_spi(&db120_spi_data, db120_spi_info,
-+ ARRAY_SIZE(db120_spi_info));
-+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
-+ db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
-+ db120_setup);
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -18,6 +18,7 @@ enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
-+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
- };
diff --git a/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-use-correct-IRQ-number-for-the-OHCI-contr.patch b/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-use-correct-IRQ-number-for-the-OHCI-contr.patch
deleted file mode 100644
index 07ddb51..0000000
--- a/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-use-correct-IRQ-number-for-the-OHCI-contr.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From fe0cc1327ddfb69b171102019a8148a9c8b352b8 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 28 Mar 2012 11:00:19 +0200
-Subject: [PATCH 37/47] MIPS: ath79: use correct IRQ number for the OHCI controller on AR7240
-
-The currently assigned IRQ number to the OHCI
-controller is incorrect for the AR7240 SoC, and
-that leads to the following error message from
-the OHCI driver:
-
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-ath79-ohci ath79-ohci: Atheros built-in OHCI controller
-ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 1
-ath79-ohci ath79-ohci: irq 14, io mem 0x1b000000
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-usb 1-1: new full-speed USB device number 2 using ath79-ohci
-ath79-ohci ath79-ohci: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
-
-Fix this by using the correct IRQ number.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/dev-usb.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void
-
- ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
- ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
-+ ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
-+ ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
- platform_device_register(&ath79_ohci_device);
- }
-
diff --git a/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-use-a-helper-function-for-USB-resource-in.patch b/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-use-a-helper-function-for-USB-resource-in.patch
deleted file mode 100644
index 0def09f..0000000
--- a/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-use-a-helper-function-for-USB-resource-in.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 30b15d9a4b05e38ae19e340b63e1a2bca917d557 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 28 Mar 2012 14:15:23 +0200
-Subject: [PATCH 38/47] MIPS: ath79: use a helper function for USB resource initialization
-
-This improves code readability, and ensures that
-all resource fields will be initialized correctly.
-Additionally, it helps to reduce the size of the
-kernel image by using uninitialized resource
-variables.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/dev-usb.c | 64 +++++++++++++++++++-------------------------
- 1 files changed, 28 insertions(+), 36 deletions(-)
-
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -25,17 +25,7 @@
- #include "common.h"
- #include "dev-usb.h"
-
--static struct resource ath79_ohci_resources[] = {
-- [0] = {
-- /* .start and .end fields are filled dynamically */
-- .flags = IORESOURCE_MEM,
-- },
-- [1] = {
-- .start = ATH79_MISC_IRQ_OHCI,
-- .end = ATH79_MISC_IRQ_OHCI,
-- .flags = IORESOURCE_IRQ,
-- },
--};
-+static struct resource ath79_ohci_resources[2];
-
- static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
-
-@@ -54,17 +44,7 @@ static struct platform_device ath79_ohci
- },
- };
-
--static struct resource ath79_ehci_resources[] = {
-- [0] = {
-- /* .start and .end fields are filled dynamically */
-- .flags = IORESOURCE_MEM,
-- },
-- [1] = {
-- .start = ATH79_CPU_IRQ_USB,
-- .end = ATH79_CPU_IRQ_USB,
-- .flags = IORESOURCE_IRQ,
-- },
--};
-+static struct resource ath79_ehci_resources[2];
-
- static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
-
-@@ -90,6 +70,20 @@ static struct platform_device ath79_ehci
- },
- };
-
-+static void __init ath79_usb_init_resource(struct resource res[2],
-+ unsigned long base,
-+ unsigned long size,
-+ int irq)
-+{
-+ res[0].flags = IORESOURCE_MEM;
-+ res[0].start = base;
-+ res[0].end = base + size - 1;
-+
-+ res[1].flags = IORESOURCE_IRQ;
-+ res[1].start = irq;
-+ res[1].end = irq;
-+}
-+
- #define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
- AR71XX_RESET_USB_PHY | \
- AR71XX_RESET_USB_OHCI_DLL)
-@@ -114,12 +108,12 @@ static void __init ath79_usb_setup(void)
-
- mdelay(900);
-
-- ath79_ohci_resources[0].start = AR71XX_OHCI_BASE;
-- ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1;
-+ ath79_usb_init_resource(ath79_ohci_resources, AR71XX_OHCI_BASE,
-+ AR71XX_OHCI_SIZE, ATH79_MISC_IRQ_OHCI);
- platform_device_register(&ath79_ohci_device);
-
-- ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
-- ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
-+ ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE,
-+ AR71XX_EHCI_SIZE, ATH79_CPU_IRQ_USB);
- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1;
- platform_device_register(&ath79_ehci_device);
- }
-@@ -143,10 +137,8 @@ static void __init ar7240_usb_setup(void
-
- iounmap(usb_ctrl_base);
-
-- ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
-- ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
-- ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
-- ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
-+ ath79_usb_init_resource(ath79_ohci_resources, AR7240_OHCI_BASE,
-+ AR7240_OHCI_SIZE, ATH79_CPU_IRQ_USB);
- platform_device_register(&ath79_ohci_device);
- }
-
-@@ -161,8 +153,8 @@ static void __init ar724x_usb_setup(void
- ath79_device_reset_clear(AR724X_RESET_USB_PHY);
- mdelay(10);
-
-- ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
-- ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
-+ ath79_usb_init_resource(ath79_ehci_resources, AR724X_EHCI_BASE,
-+ AR724X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
- platform_device_register(&ath79_ehci_device);
- }
-@@ -178,8 +170,8 @@ static void __init ar913x_usb_setup(void
- ath79_device_reset_clear(AR913X_RESET_USB_PHY);
- mdelay(10);
-
-- ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
-- ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
-+ ath79_usb_init_resource(ath79_ehci_resources, AR913X_EHCI_BASE,
-+ AR913X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
- platform_device_register(&ath79_ehci_device);
- }
-@@ -195,8 +187,8 @@ static void __init ar933x_usb_setup(void
- ath79_device_reset_clear(AR933X_RESET_USB_PHY);
- mdelay(10);
-
-- ath79_ehci_resources[0].start = AR933X_EHCI_BASE;
-- ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1;
-+ ath79_usb_init_resource(ath79_ehci_resources, AR933X_EHCI_BASE,
-+ AR933X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
- platform_device_register(&ath79_ehci_device);
- }
diff --git a/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch
deleted file mode 100644
index c77de28..0000000
--- a/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 635d5a2ac8aa483c3a0635c60bff8ea8978ff6a7 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 11 Dec 2011 18:34:13 +0100
-Subject: [PATCH 39/47] MIPS: ath79: add USB platform setup code for AR934X
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/dev-usb.c | 28 ++++++++++++++++++++++++
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 7 ++++++
- 2 files changed, 35 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -193,6 +193,32 @@ static void __init ar933x_usb_setup(void
- platform_device_register(&ath79_ehci_device);
- }
-
-+static void __init ar934x_usb_setup(void)
-+{
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
-+ return;
-+
-+ ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(AR934X_RESET_USB_PHY);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(AR934X_RESET_USB_HOST);
-+ udelay(1000);
-+
-+ ath79_usb_init_resource(ath79_ehci_resources, AR934X_EHCI_BASE,
-+ AR934X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
-+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
-+ platform_device_register(&ath79_ehci_device);
-+}
-+
- void __init ath79_register_usb(void)
- {
- if (soc_is_ar71xx())
-@@ -205,6 +231,8 @@ void __init ath79_register_usb(void)
- ar913x_usb_setup();
- else if (soc_is_ar933x())
- ar933x_usb_setup();
-+ else if (soc_is_ar934x())
-+ ar934x_usb_setup();
- else
- BUG();
- }
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -63,6 +63,8 @@
-
- #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR934X_WMAC_SIZE 0x20000
-+#define AR934X_EHCI_BASE 0x1b000000
-+#define AR934X_EHCI_SIZE 0x200
-
- /*
- * DDR_CTRL block
-@@ -288,6 +290,11 @@
- #define AR933X_RESET_USB_PHY BIT(4)
- #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
-
-+#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
-+#define AR934X_RESET_USB_HOST BIT(5)
-+#define AR934X_RESET_USB_PHY BIT(4)
-+#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
-+
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
- #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
diff --git a/target/linux/ar71xx/patches-3.3/135-MIPS-ath79-register-USB-host-controller-on-the-DB120.patch b/target/linux/ar71xx/patches-3.3/135-MIPS-ath79-register-USB-host-controller-on-the-DB120.patch
deleted file mode 100644
index e82da3d..0000000
--- a/target/linux/ar71xx/patches-3.3/135-MIPS-ath79-register-USB-host-controller-on-the-DB120.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 932c1688e960bff170f1fc8072b3d3e958407a60 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 13 Mar 2012 13:51:09 +0100
-Subject: [PATCH 40/47] MIPS: ath79: register USB host controller on the DB120 board
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/mach-db120.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -25,6 +25,7 @@
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-spi.h"
-+#include "dev-usb.h"
- #include "dev-wmac.h"
- #include "pci.h"
-
-@@ -126,6 +127,7 @@ static void __init db120_setup(void)
- db120_gpio_keys);
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
-+ ath79_register_usb();
- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
- }
diff --git a/target/linux/ar71xx/patches-3.3/136-MIPS-ath79-use-correct-fractional-dividers-for-CPU-D.patch b/target/linux/ar71xx/patches-3.3/136-MIPS-ath79-use-correct-fractional-dividers-for-CPU-D.patch
deleted file mode 100644
index cb6aa32..0000000
--- a/target/linux/ar71xx/patches-3.3/136-MIPS-ath79-use-correct-fractional-dividers-for-CPU-D.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 7328ff547389ee0b455cbf98bdfc819731d9f7b9 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Fri, 31 Aug 2012 14:22:35 +0200
-Subject: [PATCH] MIPS: ath79: use correct fractional dividers for
- {CPU,DDR}_PLL on AR934x
-
-The current dividers in the code are wrong and this
-leads to broken CPU frequency calculation on boards
-where the fractional part is used.
-
-For example, if the SoC is running from a 40MHz
-reference clock, refdiv=1, nint=14, outdiv=0 and
-nfrac=31 the real frequency is 579.375MHz but the
-current code calculates 569.687MHz instead.
-
-Because the system time is indirectly related to
-the CPU frequency the broken computation causes
-drift in the system time.
-
-The correct divider is 2^6 for the CPU PLL and 2^10
-for the DDR PLL. Use the correct values to fix the
-issue.
-
-Cc: <stable@vger.kernel.org> [3.5+]
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/clock.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -189,7 +189,7 @@ static void __init ar934x_clocks_init(vo
- AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
-
- cpu_pll = nint * ath79_ref_clk.rate / ref_div;
-- cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
-+ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
- cpu_pll /= (1 << out_div);
-
- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-@@ -203,7 +203,7 @@ static void __init ar934x_clocks_init(vo
- AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
-
- ddr_pll = nint * ath79_ref_clk.rate / ref_div;
-- ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
-+ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
- ddr_pll /= (1 << out_div);
-
- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
diff --git a/target/linux/ar71xx/patches-3.3/137-MIPS-ath79-fix-CPU-DDR-frequency-calculation-for-SRI.patch b/target/linux/ar71xx/patches-3.3/137-MIPS-ath79-fix-CPU-DDR-frequency-calculation-for-SRI.patch
deleted file mode 100644
index a2fa4db..0000000
--- a/target/linux/ar71xx/patches-3.3/137-MIPS-ath79-fix-CPU-DDR-frequency-calculation-for-SRI.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From 3f735e202d5099a5b7c621443bea365b87b0e3bb Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sat, 8 Sep 2012 12:12:50 +0200
-Subject: [PATCH] MIPS: ath79: fix CPU/DDR frequency calculation for SRIF PLLs
-
-Besides the CPU and DDR PLLs, the CPU and DDR frequencies
-can be derived from other PLLs in the SRIF block on the
-AR934x SoCs. The current code does not checks if the SRIF
-PLLs are used and this can lead to incorrectly calculated
-CPU/DDR frequencies.
-
-Fix it by calculating the frequencies from SRIF PLLs if
-those are used on a given board.
-
-Cc: <stable@vger.kernel.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
-This depends on the following patch:
-'MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x'
-https://patchwork.linux-mips.org/patch/4305/
-
- arch/mips/ath79/clock.c | 109 ++++++++++++++++++------
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 23 +++++
- 2 files changed, 104 insertions(+), 28 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -17,6 +17,8 @@
- #include <linux/err.h>
- #include <linux/clk.h>
-
-+#include <asm/div64.h>
-+
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
-@@ -166,11 +168,34 @@ static void __init ar933x_clocks_init(vo
- ath79_uart_clk.rate = ath79_ref_clk.rate;
- }
-
-+static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
-+ u32 frac, u32 out_div)
-+{
-+ u64 t;
-+ u32 ret;
-+
-+ t = ath79_ref_clk.rate;
-+ t *= nint;
-+ do_div(t, ref_div);
-+ ret = t;
-+
-+ t = ath79_ref_clk.rate;
-+ t *= nfrac;
-+ do_div(t, ref_div * frac);
-+ ret += t;
-+
-+ ret /= (1 << out_div);
-+ return ret;
-+}
-+
- static void __init ar934x_clocks_init(void)
- {
-- u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-+ u32 pll, out_div, ref_div, nint, nfrac, frac, clk_ctrl, postdiv;
- u32 cpu_pll, ddr_pll;
- u32 bootstrap;
-+ void __iomem *dpll_base;
-+
-+ dpll_base = ioremap(AR934X_SRIF_BASE, AR934X_SRIF_SIZE);
-
- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
- if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
-@@ -178,33 +203,59 @@ static void __init ar934x_clocks_init(vo
- else
- ath79_ref_clk.rate = 25 * 1000 * 1000;
-
-- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
-- out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-- AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
-- ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-- AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
-- nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
-- AR934X_PLL_CPU_CONFIG_NINT_MASK;
-- frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-- AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
--
-- cpu_pll = nint * ath79_ref_clk.rate / ref_div;
-- cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
-- cpu_pll /= (1 << out_div);
--
-- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-- out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-- AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
-- ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-- AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
-- nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
-- AR934X_PLL_DDR_CONFIG_NINT_MASK;
-- frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-- AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
--
-- ddr_pll = nint * ath79_ref_clk.rate / ref_div;
-- ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
-- ddr_pll /= (1 << out_div);
-+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
-+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
-+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
-+ AR934X_SRIF_DPLL2_OUTDIV_MASK;
-+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL1_REG);
-+ nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
-+ AR934X_SRIF_DPLL1_NINT_MASK;
-+ nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
-+ ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
-+ AR934X_SRIF_DPLL1_REFDIV_MASK;
-+ frac = 1 << 18;
-+ } else {
-+ pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
-+ nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
-+ AR934X_PLL_CPU_CONFIG_NINT_MASK;
-+ nfrac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-+ AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
-+ frac = 1 << 6;
-+ }
-+
-+ cpu_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
-+ nfrac, frac, out_div);
-+
-+ pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL2_REG);
-+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
-+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
-+ AR934X_SRIF_DPLL2_OUTDIV_MASK;
-+ pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL1_REG);
-+ nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
-+ AR934X_SRIF_DPLL1_NINT_MASK;
-+ nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
-+ ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
-+ AR934X_SRIF_DPLL1_REFDIV_MASK;
-+ frac = 1 << 18;
-+ } else {
-+ pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
-+ AR934X_PLL_DDR_CONFIG_NINT_MASK;
-+ nfrac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-+ AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
-+ frac = 1 << 10;
-+ }
-+
-+ ddr_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
-+ nfrac, frac, out_div);
-
- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
-
-@@ -240,6 +291,8 @@ static void __init ar934x_clocks_init(vo
-
- ath79_wdt_clk.rate = ath79_ref_clk.rate;
- ath79_uart_clk.rate = ath79_ref_clk.rate;
-+
-+ iounmap(dpll_base);
- }
-
- void __init ath79_clocks_init(void)
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -65,6 +65,8 @@
- #define AR934X_WMAC_SIZE 0x20000
- #define AR934X_EHCI_BASE 0x1b000000
- #define AR934X_EHCI_SIZE 0x200
-+#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
-+#define AR934X_SRIF_SIZE 0x1000
-
- /*
- * DDR_CTRL block
-@@ -405,4 +407,25 @@
- #define AR933X_GPIO_COUNT 30
- #define AR934X_GPIO_COUNT 23
-
-+/*
-+ * SRIF block
-+ */
-+#define AR934X_SRIF_CPU_DPLL1_REG 0x1c0
-+#define AR934X_SRIF_CPU_DPLL2_REG 0x1c4
-+#define AR934X_SRIF_CPU_DPLL3_REG 0x1c8
-+
-+#define AR934X_SRIF_DDR_DPLL1_REG 0x240
-+#define AR934X_SRIF_DDR_DPLL2_REG 0x244
-+#define AR934X_SRIF_DDR_DPLL3_REG 0x248
-+
-+#define AR934X_SRIF_DPLL1_REFDIV_SHIFT 27
-+#define AR934X_SRIF_DPLL1_REFDIV_MASK 0x1f
-+#define AR934X_SRIF_DPLL1_NINT_SHIFT 18
-+#define AR934X_SRIF_DPLL1_NINT_MASK 0x1ff
-+#define AR934X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff
-+
-+#define AR934X_SRIF_DPLL2_LOCAL_PLL BIT(30)
-+#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
-+#define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-3.3/140-MIPS-pci-ar724x-avoid-data-bus-error-due-to-a-missin.patch b/target/linux/ar71xx/patches-3.3/140-MIPS-pci-ar724x-avoid-data-bus-error-due-to-a-missin.patch
deleted file mode 100644
index a05b1e7..0000000
--- a/target/linux/ar71xx/patches-3.3/140-MIPS-pci-ar724x-avoid-data-bus-error-due-to-a-missin.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 9cfa64ddaba49975b420ce5e5020efc3301061ac Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 26 Jun 2012 10:19:46 +0200
-Subject: [PATCH 01/34] MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module
-
-If the controller has no PCIe module attached,
-accessing of the device configuration space
-causes a data bus error. Avoid this by checking
-the status of the PCIe link in advance, and
-indicate an error if the link is down.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar724x.c | 22 ++++++++++++++++++++++
- 1 files changed, 22 insertions(+), 0 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -23,9 +23,12 @@
- #define AR724X_PCI_MEM_BASE 0x10000000
- #define AR724X_PCI_MEM_SIZE 0x08000000
-
-+#define AR724X_PCI_REG_RESET 0x18
- #define AR724X_PCI_REG_INT_STATUS 0x4c
- #define AR724X_PCI_REG_INT_MASK 0x50
-
-+#define AR724X_PCI_RESET_LINK_UP BIT(0)
-+
- #define AR724X_PCI_INT_DEV0 BIT(14)
-
- #define AR724X_PCI_IRQ_COUNT 1
-@@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_bas
-
- static u32 ar724x_pci_bar0_value;
- static bool ar724x_pci_bar0_is_cached;
-+static bool ar724x_pci_link_up;
-+
-+static inline bool ar724x_pci_check_link(void)
-+{
-+ u32 reset;
-+
-+ reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET);
-+ return reset & AR724X_PCI_RESET_LINK_UP;
-+}
-
- static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
-@@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bu
- void __iomem *base;
- u32 data;
-
-+ if (!ar724x_pci_link_up)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
-@@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_b
- u32 data;
- int s;
-
-+ if (!ar724x_pci_link_up)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
-@@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq)
- if (ar724x_pci_ctrl_base == NULL)
- goto err_unmap_devcfg;
-
-+ ar724x_pci_link_up = ar724x_pci_check_link();
-+ if (!ar724x_pci_link_up)
-+ pr_warn("ar724x: PCIe link is down\n");
-+
- ar724x_pci_irq_init(irq);
- register_pci_controller(&ar724x_pci_controller);
-
diff --git a/target/linux/ar71xx/patches-3.3/141-MIPS-pci-ar724x-use-correct-value-for-AR724X_PCI_MEM.patch b/target/linux/ar71xx/patches-3.3/141-MIPS-pci-ar724x-use-correct-value-for-AR724X_PCI_MEM.patch
deleted file mode 100644
index d409a7a..0000000
--- a/target/linux/ar71xx/patches-3.3/141-MIPS-pci-ar724x-use-correct-value-for-AR724X_PCI_MEM.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 4b0f8aaea1f9e2f931c4de785d9ce46ff7164627 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 17 Jun 2012 12:55:24 +0200
-Subject: [PATCH 02/34] MIPS: pci-ar724x: use correct value for AR724X_PCI_MEM_SIZE
-
-The current definiton is wrong, it is conflicting
-with AR724X_PCI_CFG_BASE.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar724x.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -21,7 +21,7 @@
- #define AR724X_PCI_CTRL_SIZE 0x100
-
- #define AR724X_PCI_MEM_BASE 0x10000000
--#define AR724X_PCI_MEM_SIZE 0x08000000
-+#define AR724X_PCI_MEM_SIZE 0x04000000
-
- #define AR724X_PCI_REG_RESET 0x18
- #define AR724X_PCI_REG_INT_STATUS 0x4c
diff --git a/target/linux/ar71xx/patches-3.3/142-MIPS-pci-ar71xx-fix-AR71XX_PCI_MEM_SIZE.patch b/target/linux/ar71xx/patches-3.3/142-MIPS-pci-ar71xx-fix-AR71XX_PCI_MEM_SIZE.patch
deleted file mode 100644
index 7fb56f8..0000000
--- a/target/linux/ar71xx/patches-3.3/142-MIPS-pci-ar71xx-fix-AR71XX_PCI_MEM_SIZE.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 01dbfe17b8ff628b6e2b3c75e1fc8c11d4cca644 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Thu, 28 Jun 2012 19:19:58 +0200
-Subject: [PATCH 03/34] MIPS: pci-ar71xx: fix AR71XX_PCI_MEM_SIZE
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar71xx.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -24,7 +24,7 @@
- #include <asm/mach-ath79/pci.h>
-
- #define AR71XX_PCI_MEM_BASE 0x10000000
--#define AR71XX_PCI_MEM_SIZE 0x08000000
-+#define AR71XX_PCI_MEM_SIZE 0x07000000
-
- #define AR71XX_PCI_WIN0_OFFS 0x10000000
- #define AR71XX_PCI_WIN1_OFFS 0x11000000
diff --git a/target/linux/ar71xx/patches-3.3/143-MIPS-pci-ar724x-convert-to-a-platform-driver.patch b/target/linux/ar71xx/patches-3.3/143-MIPS-pci-ar724x-convert-to-a-platform-driver.patch
deleted file mode 100644
index fd98689..0000000
--- a/target/linux/ar71xx/patches-3.3/143-MIPS-pci-ar724x-convert-to-a-platform-driver.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From f2d2d928c3900b67a5f95e53b86de5b61a3ab12c Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 11 Jun 2012 13:19:44 +0200
-Subject: [PATCH 04/34] MIPS: pci-ar724x: convert to a platform driver
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar724x.c | 57 ++++++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 55 insertions(+), 2 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -11,6 +11,8 @@
-
- #include <linux/irq.h>
- #include <linux/pci.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/pci.h>
-@@ -262,7 +264,7 @@ static struct irq_chip ar724x_pci_irq_ch
- .irq_mask_ack = ar724x_pci_irq_mask,
- };
-
--static void __init ar724x_pci_irq_init(int irq)
-+static void __devinit ar724x_pci_irq_init(int irq)
- {
- void __iomem *base;
- int i;
-@@ -282,7 +284,7 @@ static void __init ar724x_pci_irq_init(i
- irq_set_chained_handler(irq, ar724x_pci_irq_handler);
- }
-
--int __init ar724x_pcibios_init(int irq)
-+int __devinit ar724x_pcibios_init(int irq)
- {
- int ret;
-
-@@ -312,3 +314,54 @@ err_unmap_devcfg:
- err:
- return ret;
- }
-+
-+static int __devinit ar724x_pci_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ int irq;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
-+ if (!res)
-+ return -EINVAL;
-+
-+ ar724x_pci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (ar724x_pci_ctrl_base == NULL)
-+ return -EBUSY;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
-+ if (!res)
-+ return -EINVAL;
-+
-+ ar724x_pci_devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (!ar724x_pci_devcfg_base)
-+ return -EBUSY;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return -EINVAL;
-+
-+ ar724x_pci_link_up = ar724x_pci_check_link();
-+ if (!ar724x_pci_link_up)
-+ dev_warn(&pdev->dev, "PCIe link is down\n");
-+
-+ ar724x_pci_irq_init(irq);
-+
-+ register_pci_controller(&ar724x_pci_controller);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar724x_pci_driver = {
-+ .probe = ar724x_pci_probe,
-+ .driver = {
-+ .name = "ar724x-pci",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init ar724x_pci_init(void)
-+{
-+ return platform_driver_register(&ar724x_pci_driver);
-+}
-+
-+postcore_initcall(ar724x_pci_init);
diff --git a/target/linux/ar71xx/patches-3.3/144-MIPS-pci-ar71xx-convert-to-a-platform-driver.patch b/target/linux/ar71xx/patches-3.3/144-MIPS-pci-ar71xx-convert-to-a-platform-driver.patch
deleted file mode 100644
index a78469b..0000000
--- a/target/linux/ar71xx/patches-3.3/144-MIPS-pci-ar71xx-convert-to-a-platform-driver.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From d1a22e73f991145a4abd7d0c37bcf318703c89ed Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 11 Jun 2012 13:24:55 +0200
-Subject: [PATCH 05/34] MIPS: pci-ar71xx: convert to a platform driver
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar71xx.c | 60 +++++++++++++++++++++++++++++++++++++++++---
- 1 files changed, 56 insertions(+), 4 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -18,6 +18,8 @@
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
-@@ -309,7 +311,7 @@ static struct irq_chip ar71xx_pci_irq_ch
- .irq_mask_ack = ar71xx_pci_irq_mask,
- };
-
--static __init void ar71xx_pci_irq_init(void)
-+static __devinit void ar71xx_pci_irq_init(int irq)
- {
- void __iomem *base = ath79_reset_base;
- int i;
-@@ -324,10 +326,10 @@ static __init void ar71xx_pci_irq_init(v
- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
- handle_level_irq);
-
-- irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
-+ irq_set_chained_handler(irq, ar71xx_pci_irq_handler);
- }
-
--static __init void ar71xx_pci_reset(void)
-+static __devinit void ar71xx_pci_reset(void)
- {
- void __iomem *ddr_base = ath79_ddr_base;
-
-@@ -367,9 +369,59 @@ __init int ar71xx_pcibios_init(void)
- /* clear bus errors */
- ar71xx_pci_check_error(1);
-
-- ar71xx_pci_irq_init();
-+ ar71xx_pci_irq_init(ATH79_CPU_IRQ_IP2);
-
- register_pci_controller(&ar71xx_pci_controller);
-
- return 0;
- }
-+
-+static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ int irq;
-+ u32 t;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
-+ if (!res)
-+ return -EINVAL;
-+
-+ ar71xx_pcicfg_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (!ar71xx_pcicfg_base)
-+ return -ENOMEM;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return -EINVAL;
-+
-+ ar71xx_pci_reset();
-+
-+ /* setup COMMAND register */
-+ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
-+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
-+ ar71xx_pci_local_write(PCI_COMMAND, 4, t);
-+
-+ /* clear bus errors */
-+ ar71xx_pci_check_error(1);
-+
-+ ar71xx_pci_irq_init(irq);
-+
-+ register_pci_controller(&ar71xx_pci_controller);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar71xx_pci_driver = {
-+ .probe = ar71xx_pci_probe,
-+ .driver = {
-+ .name = "ar71xx-pci",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init ar71xx_pci_init(void)
-+{
-+ return platform_driver_register(&ar71xx_pci_driver);
-+}
-+
-+postcore_initcall(ar71xx_pci_init);
diff --git a/target/linux/ar71xx/patches-3.3/145-MIPS-ath79-move-global-PCI-defines-into-a-common-hea.patch b/target/linux/ar71xx/patches-3.3/145-MIPS-ath79-move-global-PCI-defines-into-a-common-hea.patch
deleted file mode 100644
index 4861db0..0000000
--- a/target/linux/ar71xx/patches-3.3/145-MIPS-ath79-move-global-PCI-defines-into-a-common-hea.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From c3a8b5fa196cedc4b940c1e5ec482dd875aa3180 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 11 Jun 2012 13:38:06 +0200
-Subject: [PATCH 06/34] MIPS: ath79: move global PCI defines into a common header
-
-The constants will be used by a subsequent patch.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 24 ++++++++++++++++++++++++
- arch/mips/pci/pci-ar71xx.c | 16 ----------------
- arch/mips/pci/pci-ar724x.c | 8 --------
- 3 files changed, 24 insertions(+), 24 deletions(-)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -41,11 +41,35 @@
- #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
- #define AR71XX_RESET_SIZE 0x100
-
-+#define AR71XX_PCI_MEM_BASE 0x10000000
-+#define AR71XX_PCI_MEM_SIZE 0x07000000
-+
-+#define AR71XX_PCI_WIN0_OFFS 0x10000000
-+#define AR71XX_PCI_WIN1_OFFS 0x11000000
-+#define AR71XX_PCI_WIN2_OFFS 0x12000000
-+#define AR71XX_PCI_WIN3_OFFS 0x13000000
-+#define AR71XX_PCI_WIN4_OFFS 0x14000000
-+#define AR71XX_PCI_WIN5_OFFS 0x15000000
-+#define AR71XX_PCI_WIN6_OFFS 0x16000000
-+#define AR71XX_PCI_WIN7_OFFS 0x07000000
-+
-+#define AR71XX_PCI_CFG_BASE \
-+ (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
-+#define AR71XX_PCI_CFG_SIZE 0x100
-+
- #define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
- #define AR7240_USB_CTRL_SIZE 0x100
- #define AR7240_OHCI_BASE 0x1b000000
- #define AR7240_OHCI_SIZE 0x1000
-
-+#define AR724X_PCI_MEM_BASE 0x10000000
-+#define AR724X_PCI_MEM_SIZE 0x04000000
-+
-+#define AR724X_PCI_CFG_BASE 0x14000000
-+#define AR724X_PCI_CFG_SIZE 0x1000
-+#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
-+#define AR724X_PCI_CTRL_SIZE 0x100
-+
- #define AR724X_EHCI_BASE 0x1b000000
- #define AR724X_EHCI_SIZE 0x1000
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -25,22 +25,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/pci.h>
-
--#define AR71XX_PCI_MEM_BASE 0x10000000
--#define AR71XX_PCI_MEM_SIZE 0x07000000
--
--#define AR71XX_PCI_WIN0_OFFS 0x10000000
--#define AR71XX_PCI_WIN1_OFFS 0x11000000
--#define AR71XX_PCI_WIN2_OFFS 0x12000000
--#define AR71XX_PCI_WIN3_OFFS 0x13000000
--#define AR71XX_PCI_WIN4_OFFS 0x14000000
--#define AR71XX_PCI_WIN5_OFFS 0x15000000
--#define AR71XX_PCI_WIN6_OFFS 0x16000000
--#define AR71XX_PCI_WIN7_OFFS 0x07000000
--
--#define AR71XX_PCI_CFG_BASE \
-- (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
--#define AR71XX_PCI_CFG_SIZE 0x100
--
- #define AR71XX_PCI_REG_CRP_AD_CBE 0x00
- #define AR71XX_PCI_REG_CRP_WRDATA 0x04
- #define AR71XX_PCI_REG_CRP_RDDATA 0x08
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -17,14 +17,6 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/pci.h>
-
--#define AR724X_PCI_CFG_BASE 0x14000000
--#define AR724X_PCI_CFG_SIZE 0x1000
--#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
--#define AR724X_PCI_CTRL_SIZE 0x100
--
--#define AR724X_PCI_MEM_BASE 0x10000000
--#define AR724X_PCI_MEM_SIZE 0x04000000
--
- #define AR724X_PCI_REG_RESET 0x18
- #define AR724X_PCI_REG_INT_STATUS 0x4c
- #define AR724X_PCI_REG_INT_MASK 0x50
diff --git a/target/linux/ar71xx/patches-3.3/146-MIPS-ath79-register-platform-devices-for-the-PCI-con.patch b/target/linux/ar71xx/patches-3.3/146-MIPS-ath79-register-platform-devices-for-the-PCI-con.patch
deleted file mode 100644
index cc2572f..0000000
--- a/target/linux/ar71xx/patches-3.3/146-MIPS-ath79-register-platform-devices-for-the-PCI-con.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 2fdf8dcff3ffaa806e9f9d7f1c1bd876222cff4d Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 11 Jun 2012 13:39:32 +0200
-Subject: [PATCH 07/34] MIPS: ath79: register platform devices for the PCI controllers
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/pci.c | 87 +++++++++++++++++++++++++++++++++++++++++++-----
- 1 files changed, 78 insertions(+), 9 deletions(-)
-
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -14,6 +14,8 @@
-
- #include <linux/init.h>
- #include <linux/pci.h>
-+#include <linux/resource.h>
-+#include <linux/platform_device.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/irq.h>
-@@ -110,21 +112,88 @@ void __init ath79_pci_set_plat_dev_init(
- ath79_pci_plat_dev_init = func;
- }
-
--int __init ath79_register_pci(void)
-+static struct platform_device *
-+ath79_register_pci_ar71xx(void)
- {
-- if (soc_is_ar71xx())
-- return ar71xx_pcibios_init();
-+ struct platform_device *pdev;
-+ struct resource res[2];
-+
-+ memset(res, 0, sizeof(res));
-
-- if (soc_is_ar724x())
-- return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
-+ res[0].name = "cfg_base";
-+ res[0].flags = IORESOURCE_MEM;
-+ res[0].start = AR71XX_PCI_CFG_BASE;
-+ res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
-+
-+ res[1].flags = IORESOURCE_IRQ;
-+ res[1].start = ATH79_CPU_IRQ_IP2;
-+ res[1].end = ATH79_CPU_IRQ_IP2;
-+
-+ pdev = platform_device_register_simple("ar71xx-pci", -1,
-+ res, ARRAY_SIZE(res));
-+ return pdev;
-+}
-
-- if (soc_is_ar9342() || soc_is_ar9344()) {
-+static struct platform_device *
-+ath79_register_pci_ar724x(int id,
-+ unsigned long cfg_base,
-+ unsigned long ctrl_base,
-+ int irq)
-+{
-+ struct platform_device *pdev;
-+ struct resource res[3];
-+
-+ memset(res, 0, sizeof(res));
-+
-+ res[0].name = "cfg_base";
-+ res[0].flags = IORESOURCE_MEM;
-+ res[0].start = cfg_base;
-+ res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
-+
-+ res[1].name = "ctrl_base";
-+ res[1].flags = IORESOURCE_MEM;
-+ res[1].start = ctrl_base;
-+ res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
-+
-+ res[2].flags = IORESOURCE_IRQ;
-+ res[2].start = irq;
-+ res[2].end = irq;
-+
-+ pdev = platform_device_register_simple("ar724x-pci", id,
-+ res, ARRAY_SIZE(res));
-+ return pdev;
-+}
-+
-+int __init ath79_register_pci(void)
-+{
-+ struct platform_device *pdev = NULL;
-+
-+ if (soc_is_ar71xx()) {
-+ pdev = ath79_register_pci_ar71xx();
-+ } else if (soc_is_ar724x()) {
-+ pdev = ath79_register_pci_ar724x(-1,
-+ AR724X_PCI_CFG_BASE,
-+ AR724X_PCI_CTRL_BASE,
-+ ATH79_CPU_IRQ_IP2);
-+ } else if (soc_is_ar9342() ||
-+ soc_is_ar9344()) {
- u32 bootstrap;
-
- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
-- return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
-+ if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
-+ return -ENODEV;
-+
-+ pdev = ath79_register_pci_ar724x(-1,
-+ AR724X_PCI_CFG_BASE,
-+ AR724X_PCI_CTRL_BASE,
-+ ATH79_IP2_IRQ(0));
-+ } else {
-+ /* No PCI support */
-+ return -ENODEV;
- }
-
-- return -ENODEV;
-+ if (!pdev)
-+ pr_err("unable to register PCI controller device\n");
-+
-+ return pdev ? 0 : -ENODEV;
- }
diff --git a/target/linux/ar71xx/patches-3.3/147-MIPS-ath79-remove-unused-ar7-1x-24-x_pcibios_init-fu.patch b/target/linux/ar71xx/patches-3.3/147-MIPS-ath79-remove-unused-ar7-1x-24-x_pcibios_init-fu.patch
deleted file mode 100644
index 0157e34..0000000
--- a/target/linux/ar71xx/patches-3.3/147-MIPS-ath79-remove-unused-ar7-1x-24-x_pcibios_init-fu.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From 07224e2fa5f889162ee0560c6ab1eb8cd16a8dd2 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 11 Jun 2012 14:59:39 +0200
-Subject: [PATCH 08/34] MIPS: ath79: remove unused ar7{1x,24}x_pcibios_init functions
-
-The functions are unused now, so remove them.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/pci.c | 1 -
- arch/mips/include/asm/mach-ath79/pci.h | 28 ----------------------------
- arch/mips/pci/pci-ar71xx.c | 26 --------------------------
- arch/mips/pci/pci-ar724x.c | 32 --------------------------------
- 4 files changed, 0 insertions(+), 87 deletions(-)
- delete mode 100644 arch/mips/include/asm/mach-ath79/pci.h
-
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -19,7 +19,6 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/irq.h>
--#include <asm/mach-ath79/pci.h>
- #include "pci.h"
-
- static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
---- a/arch/mips/include/asm/mach-ath79/pci.h
-+++ /dev/null
-@@ -1,28 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X PCI support
-- *
-- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef __ASM_MACH_ATH79_PCI_H
--#define __ASM_MACH_ATH79_PCI_H
--
--#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
--int ar71xx_pcibios_init(void);
--#else
--static inline int ar71xx_pcibios_init(void) { return 0; }
--#endif
--
--#if defined(CONFIG_PCI_AR724X)
--int ar724x_pcibios_init(int irq);
--#else
--static inline int ar724x_pcibios_init(int irq) { return 0; }
--#endif
--
--#endif /* __ASM_MACH_ATH79_PCI_H */
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -23,7 +23,6 @@
-
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/pci.h>
-
- #define AR71XX_PCI_REG_CRP_AD_CBE 0x00
- #define AR71XX_PCI_REG_CRP_WRDATA 0x04
-@@ -335,31 +334,6 @@ static __devinit void ar71xx_pci_reset(v
- mdelay(100);
- }
-
--__init int ar71xx_pcibios_init(void)
--{
-- u32 t;
--
-- ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE);
-- if (ar71xx_pcicfg_base == NULL)
-- return -ENOMEM;
--
-- ar71xx_pci_reset();
--
-- /* setup COMMAND register */
-- t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
-- | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
-- ar71xx_pci_local_write(PCI_COMMAND, 4, t);
--
-- /* clear bus errors */
-- ar71xx_pci_check_error(1);
--
-- ar71xx_pci_irq_init(ATH79_CPU_IRQ_IP2);
--
-- register_pci_controller(&ar71xx_pci_controller);
--
-- return 0;
--}
--
- static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
- {
- struct resource *res;
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -15,7 +15,6 @@
- #include <linux/platform_device.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
--#include <asm/mach-ath79/pci.h>
-
- #define AR724X_PCI_REG_RESET 0x18
- #define AR724X_PCI_REG_INT_STATUS 0x4c
-@@ -276,37 +275,6 @@ static void __devinit ar724x_pci_irq_ini
- irq_set_chained_handler(irq, ar724x_pci_irq_handler);
- }
-
--int __devinit ar724x_pcibios_init(int irq)
--{
-- int ret;
--
-- ret = -ENOMEM;
--
-- ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
-- AR724X_PCI_CFG_SIZE);
-- if (ar724x_pci_devcfg_base == NULL)
-- goto err;
--
-- ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE,
-- AR724X_PCI_CTRL_SIZE);
-- if (ar724x_pci_ctrl_base == NULL)
-- goto err_unmap_devcfg;
--
-- ar724x_pci_link_up = ar724x_pci_check_link();
-- if (!ar724x_pci_link_up)
-- pr_warn("ar724x: PCIe link is down\n");
--
-- ar724x_pci_irq_init(irq);
-- register_pci_controller(&ar724x_pci_controller);
--
-- return PCIBIOS_SUCCESSFUL;
--
--err_unmap_devcfg:
-- iounmap(ar724x_pci_devcfg_base);
--err:
-- return ret;
--}
--
- static int __devinit ar724x_pci_probe(struct platform_device *pdev)
- {
- struct resource *res;
diff --git a/target/linux/ar71xx/patches-3.3/148-MIPS-avoid-possible-resource-conflict-in-register_pc.patch b/target/linux/ar71xx/patches-3.3/148-MIPS-avoid-possible-resource-conflict-in-register_pc.patch
deleted file mode 100644
index fc1385f..0000000
--- a/target/linux/ar71xx/patches-3.3/148-MIPS-avoid-possible-resource-conflict-in-register_pc.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From a018b28d3953a32008de839d997a992a724ae314 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 17:40:45 +0200
-Subject: [PATCH 09/34] MIPS: avoid possible resource conflict in register_pci_controller
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci.c | 15 +++++++++++++--
- 1 files changed, 13 insertions(+), 2 deletions(-)
-
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -127,9 +127,20 @@ static DEFINE_MUTEX(pci_scan_mutex);
-
- void __devinit register_pci_controller(struct pci_controller *hose)
- {
-- if (request_resource(&iomem_resource, hose->mem_resource) < 0)
-+ struct resource *parent;
-+
-+ parent = hose->mem_resource->parent;
-+ if (!parent)
-+ parent = &iomem_resource;
-+
-+ if (request_resource(parent, hose->mem_resource) < 0)
- goto out;
-- if (request_resource(&ioport_resource, hose->io_resource) < 0) {
-+
-+ parent = hose->io_resource->parent;
-+ if (!parent)
-+ parent = &ioport_resource;
-+
-+ if (request_resource(parent, hose->io_resource) < 0) {
- release_resource(hose->mem_resource);
- goto out;
- }
diff --git a/target/linux/ar71xx/patches-3.3/149-MIPS-pci-ar724x-use-dynamically-allocated-PCI-contro.patch b/target/linux/ar71xx/patches-3.3/149-MIPS-pci-ar724x-use-dynamically-allocated-PCI-contro.patch
deleted file mode 100644
index 3a67cae..0000000
--- a/target/linux/ar71xx/patches-3.3/149-MIPS-pci-ar724x-use-dynamically-allocated-PCI-contro.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From 242aedf3246dc5085271aca56134ac455bfb64b5 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 11:51:34 +0200
-Subject: [PATCH 10/34] MIPS: pci-ar724x: use dynamically allocated PCI controller structure
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar724x.c | 129 ++++++++++++++++++++++++++++----------------
- 1 files changed, 82 insertions(+), 47 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -9,6 +9,7 @@
- * by the Free Software Foundation.
- */
-
-+#include <linux/spinlock.h>
- #include <linux/irq.h>
- #include <linux/pci.h>
- #include <linux/module.h>
-@@ -28,38 +29,56 @@
-
- #define AR7240_BAR0_WAR_VALUE 0xffff
-
--static DEFINE_SPINLOCK(ar724x_pci_lock);
--static void __iomem *ar724x_pci_devcfg_base;
--static void __iomem *ar724x_pci_ctrl_base;
--
--static u32 ar724x_pci_bar0_value;
--static bool ar724x_pci_bar0_is_cached;
--static bool ar724x_pci_link_up;
-+struct ar724x_pci_controller {
-+ void __iomem *devcfg_base;
-+ void __iomem *ctrl_base;
-
--static inline bool ar724x_pci_check_link(void)
-+ int irq;
-+
-+ bool link_up;
-+ bool bar0_is_cached;
-+ u32 bar0_value;
-+
-+ spinlock_t lock;
-+
-+ struct pci_controller pci_controller;
-+};
-+
-+static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
- {
- u32 reset;
-
-- reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET);
-+ reset = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_RESET);
- return reset & AR724X_PCI_RESET_LINK_UP;
- }
-
-+static inline struct ar724x_pci_controller *
-+pci_bus_to_ar724x_controller(struct pci_bus *bus)
-+{
-+ struct pci_controller *hose;
-+
-+ hose = (struct pci_controller *) bus->sysdata;
-+ return container_of(hose, struct ar724x_pci_controller, pci_controller);
-+}
-+
- static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
- {
-+ struct ar724x_pci_controller *apc;
- unsigned long flags;
- void __iomem *base;
- u32 data;
-
-- if (!ar724x_pci_link_up)
-+ apc = pci_bus_to_ar724x_controller(bus);
-+ if (!apc->link_up)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
-- base = ar724x_pci_devcfg_base;
-+ base = apc->devcfg_base;
-
-- spin_lock_irqsave(&ar724x_pci_lock, flags);
-+ spin_lock_irqsave(&apc->lock, flags);
- data = __raw_readl(base + (where & ~3));
-
- switch (size) {
-@@ -78,17 +97,17 @@ static int ar724x_pci_read(struct pci_bu
- case 4:
- break;
- default:
-- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-+ spin_unlock_irqrestore(&apc->lock, flags);
-
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
-- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-+ spin_unlock_irqrestore(&apc->lock, flags);
-
- if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
-- ar724x_pci_bar0_is_cached) {
-+ apc->bar0_is_cached) {
- /* use the cached value */
-- *value = ar724x_pci_bar0_value;
-+ *value = apc->bar0_value;
- } else {
- *value = data;
- }
-@@ -99,12 +118,14 @@ static int ar724x_pci_read(struct pci_bu
- static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t value)
- {
-+ struct ar724x_pci_controller *apc;
- unsigned long flags;
- void __iomem *base;
- u32 data;
- int s;
-
-- if (!ar724x_pci_link_up)
-+ apc = pci_bus_to_ar724x_controller(bus);
-+ if (!apc->link_up)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (devfn)
-@@ -122,18 +143,18 @@ static int ar724x_pci_write(struct pci_b
- * BAR0 register in order to make the device memory
- * accessible.
- */
-- ar724x_pci_bar0_is_cached = true;
-- ar724x_pci_bar0_value = value;
-+ apc->bar0_is_cached = true;
-+ apc->bar0_value = value;
-
- value = AR7240_BAR0_WAR_VALUE;
- } else {
-- ar724x_pci_bar0_is_cached = false;
-+ apc->bar0_is_cached = false;
- }
- }
-
-- base = ar724x_pci_devcfg_base;
-+ base = apc->devcfg_base;
-
-- spin_lock_irqsave(&ar724x_pci_lock, flags);
-+ spin_lock_irqsave(&apc->lock, flags);
- data = __raw_readl(base + (where & ~3));
-
- switch (size) {
-@@ -151,7 +172,7 @@ static int ar724x_pci_write(struct pci_b
- data = value;
- break;
- default:
-- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-+ spin_unlock_irqrestore(&apc->lock, flags);
-
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-@@ -159,7 +180,7 @@ static int ar724x_pci_write(struct pci_b
- __raw_writel(data, base + (where & ~3));
- /* flush write */
- __raw_readl(base + (where & ~3));
-- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
-+ spin_unlock_irqrestore(&apc->lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
- }
-@@ -183,18 +204,14 @@ static struct resource ar724x_mem_resour
- .flags = IORESOURCE_MEM,
- };
-
--static struct pci_controller ar724x_pci_controller = {
-- .pci_ops = &ar724x_pci_ops,
-- .io_resource = &ar724x_io_resource,
-- .mem_resource = &ar724x_mem_resource,
--};
--
- static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
- {
-+ struct ar724x_pci_controller *apc;
- void __iomem *base;
- u32 pending;
-
-- base = ar724x_pci_ctrl_base;
-+ apc = irq_get_handler_data(irq);
-+ base = apc->ctrl_base;
-
- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
- __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-@@ -208,10 +225,12 @@ static void ar724x_pci_irq_handler(unsig
-
- static void ar724x_pci_irq_unmask(struct irq_data *d)
- {
-+ struct ar724x_pci_controller *apc;
- void __iomem *base;
- u32 t;
-
-- base = ar724x_pci_ctrl_base;
-+ apc = irq_data_get_irq_chip_data(d);
-+ base = apc->ctrl_base;
-
- switch (d->irq) {
- case ATH79_PCI_IRQ(0):
-@@ -225,10 +244,12 @@ static void ar724x_pci_irq_unmask(struct
-
- static void ar724x_pci_irq_mask(struct irq_data *d)
- {
-+ struct ar724x_pci_controller *apc;
- void __iomem *base;
- u32 t;
-
-- base = ar724x_pci_ctrl_base;
-+ apc = irq_data_get_irq_chip_data(d);
-+ base = apc->ctrl_base;
-
- switch (d->irq) {
- case ATH79_PCI_IRQ(0):
-@@ -255,12 +276,12 @@ static struct irq_chip ar724x_pci_irq_ch
- .irq_mask_ack = ar724x_pci_irq_mask,
- };
-
--static void __devinit ar724x_pci_irq_init(int irq)
-+static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc)
- {
- void __iomem *base;
- int i;
-
-- base = ar724x_pci_ctrl_base;
-+ base = apc->ctrl_base;
-
- __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
-@@ -268,45 +289,59 @@ static void __devinit ar724x_pci_irq_ini
- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
-
- for (i = ATH79_PCI_IRQ_BASE;
-- i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++)
-+ i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) {
- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
- handle_level_irq);
-+ irq_set_chip_data(i, apc);
-+ }
-
-- irq_set_chained_handler(irq, ar724x_pci_irq_handler);
-+ irq_set_handler_data(apc->irq, apc);
-+ irq_set_chained_handler(apc->irq, ar724x_pci_irq_handler);
- }
-
- static int __devinit ar724x_pci_probe(struct platform_device *pdev)
- {
-+ struct ar724x_pci_controller *apc;
- struct resource *res;
-- int irq;
-+
-+ apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller),
-+ GFP_KERNEL);
-+ if (!apc)
-+ return -ENOMEM;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
- if (!res)
- return -EINVAL;
-
-- ar724x_pci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
-- if (ar724x_pci_ctrl_base == NULL)
-+ apc->ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (apc->ctrl_base == NULL)
- return -EBUSY;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
- if (!res)
- return -EINVAL;
-
-- ar724x_pci_devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
-- if (!ar724x_pci_devcfg_base)
-+ apc->devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (!apc->devcfg_base)
- return -EBUSY;
-
-- irq = platform_get_irq(pdev, 0);
-- if (irq < 0)
-+ apc->irq = platform_get_irq(pdev, 0);
-+ if (apc->irq < 0)
- return -EINVAL;
-
-- ar724x_pci_link_up = ar724x_pci_check_link();
-- if (!ar724x_pci_link_up)
-+ spin_lock_init(&apc->lock);
-+
-+ apc->pci_controller.pci_ops = &ar724x_pci_ops;
-+ apc->pci_controller.io_resource = &ar724x_io_resource;
-+ apc->pci_controller.mem_resource = &ar724x_mem_resource;
-+
-+ apc->link_up = ar724x_pci_check_link(apc);
-+ if (!apc->link_up)
- dev_warn(&pdev->dev, "PCIe link is down\n");
-
-- ar724x_pci_irq_init(irq);
-+ ar724x_pci_irq_init(apc);
-
-- register_pci_controller(&ar724x_pci_controller);
-+ register_pci_controller(&apc->pci_controller);
-
- return 0;
- }
diff --git a/target/linux/ar71xx/patches-3.3/150-MIPS-pci-ar724x-remove-static-PCI-resources.patch b/target/linux/ar71xx/patches-3.3/150-MIPS-pci-ar724x-remove-static-PCI-resources.patch
deleted file mode 100644
index 698b2ae..0000000
--- a/target/linux/ar71xx/patches-3.3/150-MIPS-pci-ar724x-remove-static-PCI-resources.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From f1c3a7dadf7b77809cda7f77df4b1ba3b24fbfa3 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 27 Jun 2012 10:12:50 +0200
-Subject: [PATCH 11/34] MIPS: pci-ar724x: remove static PCI resources
-
-Get those from the platform device instead.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/pci.c | 21 ++++++++++++++++++++-
- arch/mips/pci/pci-ar724x.c | 40 ++++++++++++++++++++++++----------------
- 2 files changed, 44 insertions(+), 17 deletions(-)
-
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -137,10 +137,13 @@ static struct platform_device *
- ath79_register_pci_ar724x(int id,
- unsigned long cfg_base,
- unsigned long ctrl_base,
-+ unsigned long mem_base,
-+ unsigned long mem_size,
-+ unsigned long io_base,
- int irq)
- {
- struct platform_device *pdev;
-- struct resource res[3];
-+ struct resource res[5];
-
- memset(res, 0, sizeof(res));
-
-@@ -158,6 +161,16 @@ ath79_register_pci_ar724x(int id,
- res[2].start = irq;
- res[2].end = irq;
-
-+ res[3].name = "mem_base";
-+ res[3].flags = IORESOURCE_MEM;
-+ res[3].start = mem_base;
-+ res[3].end = mem_base + mem_size - 1;
-+
-+ res[4].name = "io_base";
-+ res[4].flags = IORESOURCE_IO;
-+ res[4].start = io_base;
-+ res[4].end = io_base;
-+
- pdev = platform_device_register_simple("ar724x-pci", id,
- res, ARRAY_SIZE(res));
- return pdev;
-@@ -173,6 +186,9 @@ int __init ath79_register_pci(void)
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
- AR724X_PCI_CTRL_BASE,
-+ AR724X_PCI_MEM_BASE,
-+ AR724X_PCI_MEM_SIZE,
-+ 0,
- ATH79_CPU_IRQ_IP2);
- } else if (soc_is_ar9342() ||
- soc_is_ar9344()) {
-@@ -185,6 +201,9 @@ int __init ath79_register_pci(void)
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
- AR724X_PCI_CTRL_BASE,
-+ AR724X_PCI_MEM_BASE,
-+ AR724X_PCI_MEM_SIZE,
-+ 0,
- ATH79_IP2_IRQ(0));
- } else {
- /* No PCI support */
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -42,6 +42,8 @@ struct ar724x_pci_controller {
- spinlock_t lock;
-
- struct pci_controller pci_controller;
-+ struct resource io_res;
-+ struct resource mem_res;
- };
-
- static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
-@@ -190,20 +192,6 @@ static struct pci_ops ar724x_pci_ops = {
- .write = ar724x_pci_write,
- };
-
--static struct resource ar724x_io_resource = {
-- .name = "PCI IO space",
-- .start = 0,
-- .end = 0,
-- .flags = IORESOURCE_IO,
--};
--
--static struct resource ar724x_mem_resource = {
-- .name = "PCI memory space",
-- .start = AR724X_PCI_MEM_BASE,
-- .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1,
-- .flags = IORESOURCE_MEM,
--};
--
- static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
- {
- struct ar724x_pci_controller *apc;
-@@ -331,9 +319,29 @@ static int __devinit ar724x_pci_probe(st
-
- spin_lock_init(&apc->lock);
-
-+ res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
-+ if (!res)
-+ return -EINVAL;
-+
-+ apc->io_res.parent = res;
-+ apc->io_res.name = "PCI IO space";
-+ apc->io_res.start = res->start;
-+ apc->io_res.end = res->end;
-+ apc->io_res.flags = IORESOURCE_IO;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
-+ if (!res)
-+ return -EINVAL;
-+
-+ apc->mem_res.parent = res;
-+ apc->mem_res.name = "PCI memory space";
-+ apc->mem_res.start = res->start;
-+ apc->mem_res.end = res->end;
-+ apc->mem_res.flags = IORESOURCE_MEM;
-+
- apc->pci_controller.pci_ops = &ar724x_pci_ops;
-- apc->pci_controller.io_resource = &ar724x_io_resource;
-- apc->pci_controller.mem_resource = &ar724x_mem_resource;
-+ apc->pci_controller.io_resource = &apc->io_res;
-+ apc->pci_controller.mem_resource = &apc->mem_res;
-
- apc->link_up = ar724x_pci_check_link(apc);
- if (!apc->link_up)
diff --git a/target/linux/ar71xx/patches-3.3/151-MIPS-pci-ar724x-use-per-controller-IRQ-base.patch b/target/linux/ar71xx/patches-3.3/151-MIPS-pci-ar724x-use-per-controller-IRQ-base.patch
deleted file mode 100644
index 5b690ab..0000000
--- a/target/linux/ar71xx/patches-3.3/151-MIPS-pci-ar724x-use-per-controller-IRQ-base.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From d258929cd4c8c495f619f0e66d9d1c23f3f9246f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 26 Jun 2012 11:59:45 +0200
-Subject: [PATCH 12/34] MIPS: pci-ar724x: use per-controller IRQ base
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar724x.c | 31 +++++++++++++++++++++----------
- 1 files changed, 21 insertions(+), 10 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -34,6 +34,7 @@ struct ar724x_pci_controller {
- void __iomem *ctrl_base;
-
- int irq;
-+ int irq_base;
-
- bool link_up;
- bool bar0_is_cached;
-@@ -205,7 +206,7 @@ static void ar724x_pci_irq_handler(unsig
- __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-
- if (pending & AR724X_PCI_INT_DEV0)
-- generic_handle_irq(ATH79_PCI_IRQ(0));
-+ generic_handle_irq(apc->irq_base + 0);
-
- else
- spurious_interrupt();
-@@ -215,13 +216,15 @@ static void ar724x_pci_irq_unmask(struct
- {
- struct ar724x_pci_controller *apc;
- void __iomem *base;
-+ int offset;
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
- base = apc->ctrl_base;
-+ offset = apc->irq_base - d->irq;
-
-- switch (d->irq) {
-- case ATH79_PCI_IRQ(0):
-+ switch (offset) {
-+ case 0:
- t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(t | AR724X_PCI_INT_DEV0,
- base + AR724X_PCI_REG_INT_MASK);
-@@ -234,13 +237,15 @@ static void ar724x_pci_irq_mask(struct i
- {
- struct ar724x_pci_controller *apc;
- void __iomem *base;
-+ int offset;
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
- base = apc->ctrl_base;
-+ offset = apc->irq_base - d->irq;
-
-- switch (d->irq) {
-- case ATH79_PCI_IRQ(0):
-+ switch (offset) {
-+ case 0:
- t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(t & ~AR724X_PCI_INT_DEV0,
- base + AR724X_PCI_REG_INT_MASK);
-@@ -264,7 +269,8 @@ static struct irq_chip ar724x_pci_irq_ch
- .irq_mask_ack = ar724x_pci_irq_mask,
- };
-
--static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc)
-+static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
-+ int id)
- {
- void __iomem *base;
- int i;
-@@ -274,10 +280,10 @@ static void __devinit ar724x_pci_irq_ini
- __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
-
-- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
-+ apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
-
-- for (i = ATH79_PCI_IRQ_BASE;
-- i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) {
-+ for (i = apc->irq_base;
-+ i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
- handle_level_irq);
- irq_set_chip_data(i, apc);
-@@ -291,6 +297,11 @@ static int __devinit ar724x_pci_probe(st
- {
- struct ar724x_pci_controller *apc;
- struct resource *res;
-+ int id;
-+
-+ id = pdev->id;
-+ if (id == -1)
-+ id = 0;
-
- apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller),
- GFP_KERNEL);
-@@ -347,7 +358,7 @@ static int __devinit ar724x_pci_probe(st
- if (!apc->link_up)
- dev_warn(&pdev->dev, "PCIe link is down\n");
-
-- ar724x_pci_irq_init(apc);
-+ ar724x_pci_irq_init(apc, id);
-
- register_pci_controller(&apc->pci_controller);
-
diff --git a/target/linux/ar71xx/patches-3.3/152-MIPS-pci-ar724x-setup-command-register-of-the-PCI-co.patch b/target/linux/ar71xx/patches-3.3/152-MIPS-pci-ar724x-setup-command-register-of-the-PCI-co.patch
deleted file mode 100644
index 38c43bc..0000000
--- a/target/linux/ar71xx/patches-3.3/152-MIPS-pci-ar724x-setup-command-register-of-the-PCI-co.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 93824983ceb36d4ce1f4a644031ec6fb5f332f1d Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 26 Jun 2012 15:14:47 +0200
-Subject: [PATCH 13/34] MIPS: pci-ar724x: setup command register of the PCI controller
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/pci.c | 10 +++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +
- arch/mips/pci/pci-ar724x.c | 63 ++++++++++++++++++++++++
- 3 files changed, 74 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -137,13 +137,14 @@ static struct platform_device *
- ath79_register_pci_ar724x(int id,
- unsigned long cfg_base,
- unsigned long ctrl_base,
-+ unsigned long crp_base,
- unsigned long mem_base,
- unsigned long mem_size,
- unsigned long io_base,
- int irq)
- {
- struct platform_device *pdev;
-- struct resource res[5];
-+ struct resource res[6];
-
- memset(res, 0, sizeof(res));
-
-@@ -171,6 +172,11 @@ ath79_register_pci_ar724x(int id,
- res[4].start = io_base;
- res[4].end = io_base;
-
-+ res[5].name = "crp_base";
-+ res[5].flags = IORESOURCE_MEM;
-+ res[5].start = crp_base;
-+ res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
-+
- pdev = platform_device_register_simple("ar724x-pci", id,
- res, ARRAY_SIZE(res));
- return pdev;
-@@ -186,6 +192,7 @@ int __init ath79_register_pci(void)
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
- AR724X_PCI_CTRL_BASE,
-+ AR724X_PCI_CRP_BASE,
- AR724X_PCI_MEM_BASE,
- AR724X_PCI_MEM_SIZE,
- 0,
-@@ -201,6 +208,7 @@ int __init ath79_register_pci(void)
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
- AR724X_PCI_CTRL_BASE,
-+ AR724X_PCI_CRP_BASE,
- AR724X_PCI_MEM_BASE,
- AR724X_PCI_MEM_SIZE,
- 0,
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -67,6 +67,8 @@
-
- #define AR724X_PCI_CFG_BASE 0x14000000
- #define AR724X_PCI_CFG_SIZE 0x1000
-+#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000)
-+#define AR724X_PCI_CRP_SIZE 0x1000
- #define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
- #define AR724X_PCI_CTRL_SIZE 0x100
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -29,9 +29,17 @@
-
- #define AR7240_BAR0_WAR_VALUE 0xffff
-
-+#define AR724X_PCI_CMD_INIT (PCI_COMMAND_MEMORY | \
-+ PCI_COMMAND_MASTER | \
-+ PCI_COMMAND_INVALIDATE | \
-+ PCI_COMMAND_PARITY | \
-+ PCI_COMMAND_SERR | \
-+ PCI_COMMAND_FAST_BACK)
-+
- struct ar724x_pci_controller {
- void __iomem *devcfg_base;
- void __iomem *ctrl_base;
-+ void __iomem *crp_base;
-
- int irq;
- int irq_base;
-@@ -64,6 +72,51 @@ pci_bus_to_ar724x_controller(struct pci_
- return container_of(hose, struct ar724x_pci_controller, pci_controller);
- }
-
-+static int ar724x_pci_local_write(struct ar724x_pci_controller *apc,
-+ int where, int size, u32 value)
-+{
-+ unsigned long flags;
-+ void __iomem *base;
-+ u32 data;
-+ int s;
-+
-+ WARN_ON(where & (size - 1));
-+
-+ if (!apc->link_up)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ base = apc->crp_base;
-+
-+ spin_lock_irqsave(&apc->lock, flags);
-+ data = __raw_readl(base + (where & ~3));
-+
-+ switch (size) {
-+ case 1:
-+ s = ((where & 3) * 8);
-+ data &= ~(0xff << s);
-+ data |= ((value & 0xff) << s);
-+ break;
-+ case 2:
-+ s = ((where & 2) * 8);
-+ data &= ~(0xffff << s);
-+ data |= ((value & 0xffff) << s);
-+ break;
-+ case 4:
-+ data = value;
-+ break;
-+ default:
-+ spin_unlock_irqrestore(&apc->lock, flags);
-+ return PCIBIOS_BAD_REGISTER_NUMBER;
-+ }
-+
-+ __raw_writel(data, base + (where & ~3));
-+ /* flush write */
-+ __raw_readl(base + (where & ~3));
-+ spin_unlock_irqrestore(&apc->lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
- static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
- {
-@@ -324,6 +377,14 @@ static int __devinit ar724x_pci_probe(st
- if (!apc->devcfg_base)
- return -EBUSY;
-
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base");
-+ if (!res)
-+ return -EINVAL;
-+
-+ apc->crp_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (apc->crp_base == NULL)
-+ return -EBUSY;
-+
- apc->irq = platform_get_irq(pdev, 0);
- if (apc->irq < 0)
- return -EINVAL;
-@@ -360,6 +421,8 @@ static int __devinit ar724x_pci_probe(st
-
- ar724x_pci_irq_init(apc, id);
-
-+ ar724x_pci_local_write(apc, PCI_COMMAND, 4, AR724X_PCI_CMD_INIT);
-+
- register_pci_controller(&apc->pci_controller);
-
- return 0;
diff --git a/target/linux/ar71xx/patches-3.3/153-MIPS-pci-ar71xx-use-dynamically-allocated-PCI-contro.patch b/target/linux/ar71xx/patches-3.3/153-MIPS-pci-ar71xx-use-dynamically-allocated-PCI-contro.patch
deleted file mode 100644
index 4db1fd9..0000000
--- a/target/linux/ar71xx/patches-3.3/153-MIPS-pci-ar71xx-use-dynamically-allocated-PCI-contro.patch
+++ /dev/null
@@ -1,228 +0,0 @@
-From 6c3ef689e4364dca74eaaecd72384be09e5a6bc8 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 25 Jun 2012 09:19:08 +0200
-Subject: [PATCH 14/34] MIPS: pci-ar71xx: use dynamically allocated PCI controller structure
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar71xx.c | 84 +++++++++++++++++++++++++++----------------
- 1 files changed, 53 insertions(+), 31 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -20,6 +20,7 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
-+#include <linux/slab.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
-@@ -48,8 +49,12 @@
-
- #define AR71XX_PCI_IRQ_COUNT 5
-
--static DEFINE_SPINLOCK(ar71xx_pci_lock);
--static void __iomem *ar71xx_pcicfg_base;
-+struct ar71xx_pci_controller {
-+ void __iomem *cfg_base;
-+ spinlock_t lock;
-+ int irq;
-+ struct pci_controller pci_ctrl;
-+};
-
- /* Byte lane enable bits */
- static const u8 ar71xx_pci_ble_table[4][4] = {
-@@ -92,9 +97,18 @@ static inline u32 ar71xx_pci_bus_addr(st
- return ret;
- }
-
--static int ar71xx_pci_check_error(int quiet)
-+static inline struct ar71xx_pci_controller *
-+pci_bus_to_ar71xx_controller(struct pci_bus *bus)
- {
-- void __iomem *base = ar71xx_pcicfg_base;
-+ struct pci_controller *hose;
-+
-+ hose = (struct pci_controller *) bus->sysdata;
-+ return container_of(hose, struct ar71xx_pci_controller, pci_ctrl);
-+}
-+
-+static int ar71xx_pci_check_error(struct ar71xx_pci_controller *apc, int quiet)
-+{
-+ void __iomem *base = apc->cfg_base;
- u32 pci_err;
- u32 ahb_err;
-
-@@ -129,9 +143,10 @@ static int ar71xx_pci_check_error(int qu
- return !!(ahb_err | pci_err);
- }
-
--static inline void ar71xx_pci_local_write(int where, int size, u32 value)
-+static inline void ar71xx_pci_local_write(struct ar71xx_pci_controller *apc,
-+ int where, int size, u32 value)
- {
-- void __iomem *base = ar71xx_pcicfg_base;
-+ void __iomem *base = apc->cfg_base;
- u32 ad_cbe;
-
- value = value << (8 * (where & 3));
-@@ -147,7 +162,8 @@ static inline int ar71xx_pci_set_cfgaddr
- unsigned int devfn,
- int where, int size, u32 cmd)
- {
-- void __iomem *base = ar71xx_pcicfg_base;
-+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
-+ void __iomem *base = apc->cfg_base;
- u32 addr;
-
- addr = ar71xx_pci_bus_addr(bus, devfn, where);
-@@ -156,13 +172,14 @@ static inline int ar71xx_pci_set_cfgaddr
- __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
- base + AR71XX_PCI_REG_CFG_CBE);
-
-- return ar71xx_pci_check_error(1);
-+ return ar71xx_pci_check_error(apc, 1);
- }
-
- static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *value)
- {
-- void __iomem *base = ar71xx_pcicfg_base;
-+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
-+ void __iomem *base = apc->cfg_base;
- unsigned long flags;
- u32 data;
- int err;
-@@ -171,7 +188,7 @@ static int ar71xx_pci_read_config(struct
- ret = PCIBIOS_SUCCESSFUL;
- data = ~0;
-
-- spin_lock_irqsave(&ar71xx_pci_lock, flags);
-+ spin_lock_irqsave(&apc->lock, flags);
-
- err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
- AR71XX_PCI_CFG_CMD_READ);
-@@ -180,7 +197,7 @@ static int ar71xx_pci_read_config(struct
- else
- data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
-
-- spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
-+ spin_unlock_irqrestore(&apc->lock, flags);
-
- *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
-
-@@ -190,7 +207,8 @@ static int ar71xx_pci_read_config(struct
- static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
- {
-- void __iomem *base = ar71xx_pcicfg_base;
-+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
-+ void __iomem *base = apc->cfg_base;
- unsigned long flags;
- int err;
- int ret;
-@@ -198,7 +216,7 @@ static int ar71xx_pci_write_config(struc
- value = value << (8 * (where & 3));
- ret = PCIBIOS_SUCCESSFUL;
-
-- spin_lock_irqsave(&ar71xx_pci_lock, flags);
-+ spin_lock_irqsave(&apc->lock, flags);
-
- err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
- AR71XX_PCI_CFG_CMD_WRITE);
-@@ -207,7 +225,7 @@ static int ar71xx_pci_write_config(struc
- else
- __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
-
-- spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
-+ spin_unlock_irqrestore(&apc->lock, flags);
-
- return ret;
- }
-@@ -231,12 +249,6 @@ static struct resource ar71xx_pci_mem_re
- .flags = IORESOURCE_MEM
- };
-
--static struct pci_controller ar71xx_pci_controller = {
-- .pci_ops = &ar71xx_pci_ops,
-- .mem_resource = &ar71xx_pci_mem_resource,
-- .io_resource = &ar71xx_pci_io_resource,
--};
--
- static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
- {
- void __iomem *base = ath79_reset_base;
-@@ -294,7 +306,7 @@ static struct irq_chip ar71xx_pci_irq_ch
- .irq_mask_ack = ar71xx_pci_irq_mask,
- };
-
--static __devinit void ar71xx_pci_irq_init(int irq)
-+static __devinit void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
- {
- void __iomem *base = ath79_reset_base;
- int i;
-@@ -309,7 +321,7 @@ static __devinit void ar71xx_pci_irq_ini
- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
- handle_level_irq);
-
-- irq_set_chained_handler(irq, ar71xx_pci_irq_handler);
-+ irq_set_chained_handler(apc->irq, ar71xx_pci_irq_handler);
- }
-
- static __devinit void ar71xx_pci_reset(void)
-@@ -336,20 +348,26 @@ static __devinit void ar71xx_pci_reset(v
-
- static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
- {
-+ struct ar71xx_pci_controller *apc;
- struct resource *res;
-- int irq;
- u32 t;
-
-+ apc = kzalloc(sizeof(struct ar71xx_pci_controller), GFP_KERNEL);
-+ if (!apc)
-+ return -ENOMEM;
-+
-+ spin_lock_init(&apc->lock);
-+
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
- if (!res)
- return -EINVAL;
-
-- ar71xx_pcicfg_base = devm_request_and_ioremap(&pdev->dev, res);
-- if (!ar71xx_pcicfg_base)
-+ apc->cfg_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (!apc->cfg_base)
- return -ENOMEM;
-
-- irq = platform_get_irq(pdev, 0);
-- if (irq < 0)
-+ apc->irq = platform_get_irq(pdev, 0);
-+ if (apc->irq < 0)
- return -EINVAL;
-
- ar71xx_pci_reset();
-@@ -357,14 +375,18 @@ static int __devinit ar71xx_pci_probe(st
- /* setup COMMAND register */
- t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
- | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
-- ar71xx_pci_local_write(PCI_COMMAND, 4, t);
-+ ar71xx_pci_local_write(apc, PCI_COMMAND, 4, t);
-
- /* clear bus errors */
-- ar71xx_pci_check_error(1);
-+ ar71xx_pci_check_error(apc, 1);
-+
-+ ar71xx_pci_irq_init(apc);
-
-- ar71xx_pci_irq_init(irq);
-+ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
-+ apc->pci_ctrl.mem_resource = &ar71xx_pci_mem_resource;
-+ apc->pci_ctrl.io_resource = &ar71xx_pci_io_resource;
-
-- register_pci_controller(&ar71xx_pci_controller);
-+ register_pci_controller(&apc->pci_ctrl);
-
- return 0;
- }
diff --git a/target/linux/ar71xx/patches-3.3/154-MIPS-pci-ar71xx-remove-static-PCI-controller-resourc.patch b/target/linux/ar71xx/patches-3.3/154-MIPS-pci-ar71xx-remove-static-PCI-controller-resourc.patch
deleted file mode 100644
index d31ba26..0000000
--- a/target/linux/ar71xx/patches-3.3/154-MIPS-pci-ar71xx-remove-static-PCI-controller-resourc.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 7dc3ccb5dc972b06c41b309653d132beaaedeb37 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 25 Jun 2012 09:52:23 +0200
-Subject: [PATCH 15/34] MIPS: pci-ar71xx: remove static PCI controller resources
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar71xx.c | 30 ++++++++++++++----------------
- 1 files changed, 14 insertions(+), 16 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -54,6 +54,8 @@ struct ar71xx_pci_controller {
- spinlock_t lock;
- int irq;
- struct pci_controller pci_ctrl;
-+ struct resource io_res;
-+ struct resource mem_res;
- };
-
- /* Byte lane enable bits */
-@@ -235,20 +237,6 @@ static struct pci_ops ar71xx_pci_ops = {
- .write = ar71xx_pci_write_config,
- };
-
--static struct resource ar71xx_pci_io_resource = {
-- .name = "PCI IO space",
-- .start = 0,
-- .end = 0,
-- .flags = IORESOURCE_IO,
--};
--
--static struct resource ar71xx_pci_mem_resource = {
-- .name = "PCI memory space",
-- .start = AR71XX_PCI_MEM_BASE,
-- .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
-- .flags = IORESOURCE_MEM
--};
--
- static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
- {
- void __iomem *base = ath79_reset_base;
-@@ -370,6 +358,16 @@ static int __devinit ar71xx_pci_probe(st
- if (apc->irq < 0)
- return -EINVAL;
-
-+ apc->io_res.name = "PCI IO space";
-+ apc->io_res.start = 0;
-+ apc->io_res.end = 0;
-+ apc->io_res.flags = IORESOURCE_IO;
-+
-+ apc->mem_res.name = "PCI memory space";
-+ apc->mem_res.start = AR71XX_PCI_MEM_BASE;
-+ apc->mem_res.end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
-+ apc->mem_res.flags = IORESOURCE_MEM;
-+
- ar71xx_pci_reset();
-
- /* setup COMMAND register */
-@@ -383,8 +381,8 @@ static int __devinit ar71xx_pci_probe(st
- ar71xx_pci_irq_init(apc);
-
- apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
-- apc->pci_ctrl.mem_resource = &ar71xx_pci_mem_resource;
-- apc->pci_ctrl.io_resource = &ar71xx_pci_io_resource;
-+ apc->pci_ctrl.mem_resource = &apc->mem_res;
-+ apc->pci_ctrl.io_resource = &apc->io_res;
-
- register_pci_controller(&apc->pci_ctrl);
-
diff --git a/target/linux/ar71xx/patches-3.3/160-MIPS-ath79-add-early-printk-support-for-the-QCA955X-.patch b/target/linux/ar71xx/patches-3.3/160-MIPS-ath79-add-early-printk-support-for-the-QCA955X-.patch
deleted file mode 100644
index 7f1f230..0000000
--- a/target/linux/ar71xx/patches-3.3/160-MIPS-ath79-add-early-printk-support-for-the-QCA955X-.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 114df1e368b8503de1fe63e97d6eea521eecfbe4 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:40:38 +0200
-Subject: [PATCH 16/34] MIPS: ath79: add early printk support for the QCA955X SoCs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/early_printk.c | 1 +
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
- 2 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -74,6 +74,7 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_AR9341:
- case REV_ID_MAJOR_AR9342:
- case REV_ID_MAJOR_AR9344:
-+ case REV_ID_MAJOR_QCA9558:
- _prom_putchar = prom_putchar_ar71xx;
- break;
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -370,6 +370,7 @@
- #define REV_ID_MAJOR_AR9341 0x0120
- #define REV_ID_MAJOR_AR9342 0x1120
- #define REV_ID_MAJOR_AR9344 0x2120
-+#define REV_ID_MAJOR_QCA9558 0x1130
-
- #define AR71XX_REV_ID_MINOR_MASK 0x3
- #define AR71XX_REV_ID_MINOR_AR7130 0x0
diff --git a/target/linux/ar71xx/patches-3.3/161-MIPS-ath79-add-SoC-detection-code-for-the-QCA9558-So.patch b/target/linux/ar71xx/patches-3.3/161-MIPS-ath79-add-SoC-detection-code-for-the-QCA9558-So.patch
deleted file mode 100644
index 1d9dd4b..0000000
--- a/target/linux/ar71xx/patches-3.3/161-MIPS-ath79-add-SoC-detection-code-for-the-QCA9558-So.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 3c3c0eccf63b12fea98fd0eb65d0ccf69a7c5a57 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:42:16 +0200
-Subject: [PATCH 17/34] MIPS: ath79: add SoC detection code for the QCA9558 SoC
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/Kconfig | 4 ++++
- arch/mips/ath79/setup.c | 12 +++++++++++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
- arch/mips/include/asm/mach-ath79/ath79.h | 11 +++++++++++
- 4 files changed, 28 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -88,6 +88,10 @@ config SOC_AR934X
- select PCI_AR724X if PCI
- def_bool n
-
-+config SOC_QCA955X
-+ select USB_ARCH_HAS_EHCI
-+ def_bool n
-+
- config PCI_AR724X
- def_bool n
-
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -164,13 +164,23 @@ static void __init ath79_detect_sys_type
- rev = id & AR934X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_QCA9558:
-+ ath79_soc = ATH79_SOC_QCA9558;
-+ chip = "9558";
-+ rev = id & AR944X_REV_ID_REVISION_MASK;
-+ break;
-+
- default:
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
-
- ath79_soc_rev = rev;
-
-- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
-+ if (soc_is_qca955x())
-+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
-+ chip, rev);
-+ else
-+ sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
- pr_info("SoC: %s\n", ath79_sys_type);
- }
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -391,6 +391,8 @@
-
- #define AR934X_REV_ID_REVISION_MASK 0xf
-
-+#define AR944X_REV_ID_REVISION_MASK 0xf
-+
- /*
- * SPI block
- */
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -32,6 +32,7 @@ enum ath79_soc_type {
- ATH79_SOC_AR9341,
- ATH79_SOC_AR9342,
- ATH79_SOC_AR9344,
-+ ATH79_SOC_QCA9558,
- };
-
- extern enum ath79_soc_type ath79_soc;
-@@ -98,6 +99,16 @@ static inline int soc_is_ar934x(void)
- return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
- }
-
-+static inline int soc_is_qca9558(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA9558;
-+}
-+
-+static inline int soc_is_qca955x(void)
-+{
-+ return soc_is_qca9558();
-+}
-+
- extern void __iomem *ath79_ddr_base;
- extern void __iomem *ath79_pll_base;
- extern void __iomem *ath79_reset_base;
diff --git a/target/linux/ar71xx/patches-3.3/162-MIPS-ath79-add-clock-setup-for-the-QCA955X-SoCs.patch b/target/linux/ar71xx/patches-3.3/162-MIPS-ath79-add-clock-setup-for-the-QCA955X-SoCs.patch
deleted file mode 100644
index bb0924c..0000000
--- a/target/linux/ar71xx/patches-3.3/162-MIPS-ath79-add-clock-setup-for-the-QCA955X-SoCs.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From f465a16766a015a31d4e83af1ad62cc718d64f5a Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:43:08 +0200
-Subject: [PATCH 18/34] MIPS: ath79: add clock setup for the QCA955X SoCs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 39 ++++++++++++
- 2 files changed, 117 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -295,6 +295,82 @@ static void __init ar934x_clocks_init(vo
- iounmap(dpll_base);
- }
-
-+static void __init qca955x_clocks_init(void)
-+{
-+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & QCA955X_BOOTSTRAP_REF_CLK_40)
-+ ath79_ref_clk.rate = 40 * 1000 * 1000;
-+ else
-+ ath79_ref_clk.rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ QCA955X_PLL_CPU_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA955X_PLL_CPU_CONFIG_NINT_SHIFT) &
-+ QCA955X_PLL_CPU_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-+ QCA955X_PLL_CPU_CONFIG_NFRAC_MASK;
-+
-+ cpu_pll = nint * ath79_ref_clk.rate / ref_div;
-+ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ QCA955X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA955X_PLL_DDR_CONFIG_NINT_SHIFT) &
-+ QCA955X_PLL_DDR_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-+ QCA955X_PLL_DDR_CONFIG_NFRAC_MASK;
-+
-+ ddr_pll = nint * ath79_ref_clk.rate / ref_div;
-+ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+ ath79_cpu_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-+ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
-+ else
-+ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+ ath79_ddr_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-+ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
-+ else
-+ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+ ath79_ahb_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
-+ else
-+ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_wdt_clk.rate = ath79_ref_clk.rate;
-+ ath79_uart_clk.rate = ath79_ref_clk.rate;
-+}
-+
- void __init ath79_clocks_init(void)
- {
- if (soc_is_ar71xx())
-@@ -307,6 +383,8 @@ void __init ath79_clocks_init(void)
- ar933x_clocks_init();
- else if (soc_is_ar934x())
- ar934x_clocks_init();
-+ else if (soc_is_qca955x())
-+ qca955x_clocks_init();
- else
- BUG();
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -225,6 +225,41 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA955X_PLL_CPU_CONFIG_REG 0x00
-+#define QCA955X_PLL_DDR_CONFIG_REG 0x04
-+#define QCA955X_PLL_CLK_CTRL_REG 0x08
-+
-+#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-+#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-+#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6
-+#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-+#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
-+
-+#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-+#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-+#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10
-+#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-+#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-+#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-+#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
- /*
- * USB_CONFIG block
- */
-@@ -264,6 +299,8 @@
- #define AR934X_RESET_REG_BOOTSTRAP 0xb0
- #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
-+#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
-+
- #define MISC_INT_ETHSW BIT(12)
- #define MISC_INT_TIMER4 BIT(10)
- #define MISC_INT_TIMER3 BIT(9)
-@@ -341,6 +378,8 @@
- #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
- #define AR934X_BOOTSTRAP_DDR1 BIT(0)
-
-+#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-+
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
- #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
- #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
diff --git a/target/linux/ar71xx/patches-3.3/163-MIPS-ath79-add-IRQ-handling-code-for-the-QCA955X-SoC.patch b/target/linux/ar71xx/patches-3.3/163-MIPS-ath79-add-IRQ-handling-code-for-the-QCA955X-SoC.patch
deleted file mode 100644
index 8d24c74..0000000
--- a/target/linux/ar71xx/patches-3.3/163-MIPS-ath79-add-IRQ-handling-code-for-the-QCA955X-SoC.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From 5d0de52f8e36916485a61b820916b71b5d918e6f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:44:23 +0200
-Subject: [PATCH 19/34] MIPS: ath79: add IRQ handling code for the QCA955X SoCs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/irq.c | 110 ++++++++++++++++++++++--
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 32 +++++++
- arch/mips/include/asm/mach-ath79/irq.h | 9 ++-
- 3 files changed, 142 insertions(+), 9 deletions(-)
-
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -130,7 +130,10 @@ static void __init ath79_misc_irq_init(v
-
- if (soc_is_ar71xx() || soc_is_ar913x())
- ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-- else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
-+ else if (soc_is_ar724x() ||
-+ soc_is_ar933x() ||
-+ soc_is_ar934x() ||
-+ soc_is_qca955x())
- ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
- else
- BUG();
-@@ -177,6 +180,88 @@ static void ar934x_ip2_irq_init(void)
- irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
- }
-
-+static void qca955x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ disable_irq_nosync(irq);
-+
-+ status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
-+ status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ goto enable;
-+ }
-+
-+ if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP2_IRQ(0));
-+ }
-+
-+ if (status & QCA955X_EXT_INT_WMAC_ALL) {
-+ /* TODO: flsuh DDR? */
-+ generic_handle_irq(ATH79_IP2_IRQ(1));
-+ }
-+
-+enable:
-+ enable_irq(irq);
-+}
-+
-+static void qca955x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ disable_irq_nosync(irq);
-+
-+ status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
-+ status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
-+ QCA955X_EXT_INT_USB1 |
-+ QCA955X_EXT_INT_USB2;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ goto enable;
-+ }
-+
-+ if (status & QCA955X_EXT_INT_USB1) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(0));
-+ }
-+
-+ if (status & QCA955X_EXT_INT_USB2) {
-+ /* TODO: flsuh DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(1));
-+ }
-+
-+ if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(2));
-+ }
-+
-+enable:
-+ enable_irq(irq);
-+}
-+
-+static void qca955x_irq_init(void)
-+{
-+ int i;
-+
-+ for (i = ATH79_IP2_IRQ_BASE;
-+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip,
-+ handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, qca955x_ip2_irq_dispatch);
-+
-+ for (i = ATH79_IP3_IRQ_BASE;
-+ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip,
-+ handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ_IP3, qca955x_ip3_irq_dispatch);
-+}
-+
- asmlinkage void plat_irq_dispatch(void)
- {
- unsigned long pending;
-@@ -212,6 +297,17 @@ asmlinkage void plat_irq_dispatch(void)
- * Issue a flush in the handlers to ensure that the driver sees
- * the update.
- */
-+
-+static void ath79_default_ip2_handler(void)
-+{
-+ do_IRQ(ATH79_CPU_IRQ_IP2);
-+}
-+
-+static void ath79_default_ip3_handler(void)
-+{
-+ do_IRQ(ATH79_CPU_IRQ_USB);
-+}
-+
- static void ar71xx_ip2_handler(void)
- {
- ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
-@@ -236,11 +332,6 @@ static void ar933x_ip2_handler(void)
- do_IRQ(ATH79_CPU_IRQ_IP2);
- }
-
--static void ar934x_ip2_handler(void)
--{
-- do_IRQ(ATH79_CPU_IRQ_IP2);
--}
--
- static void ar71xx_ip3_handler(void)
- {
- ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
-@@ -286,8 +377,11 @@ void __init arch_init_irq(void)
- ath79_ip2_handler = ar933x_ip2_handler;
- ath79_ip3_handler = ar933x_ip3_handler;
- } else if (soc_is_ar934x()) {
-- ath79_ip2_handler = ar934x_ip2_handler;
-+ ath79_ip2_handler = ath79_default_ip2_handler;
- ath79_ip3_handler = ar934x_ip3_handler;
-+ } else if (soc_is_qca955x()) {
-+ ath79_ip2_handler = ath79_default_ip2_handler;
-+ ath79_ip3_handler = ath79_default_ip3_handler;
- } else {
- BUG();
- }
-@@ -298,4 +392,6 @@ void __init arch_init_irq(void)
-
- if (soc_is_ar934x())
- ar934x_ip2_irq_init();
-+ else if (soc_is_qca955x())
-+ qca955x_irq_init();
- }
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -300,6 +300,7 @@
- #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
- #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
-+#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-
- #define MISC_INT_ETHSW BIT(12)
- #define MISC_INT_TIMER4 BIT(10)
-@@ -398,6 +399,37 @@
- AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
- AR934X_PCIE_WMAC_INT_PCIE_RC3)
-
-+#define QCA955X_EXT_INT_WMAC_MISC BIT(0)
-+#define QCA955X_EXT_INT_WMAC_TX BIT(1)
-+#define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
-+#define QCA955X_EXT_INT_WMAC_RXHP BIT(3)
-+#define QCA955X_EXT_INT_PCIE_RC1 BIT(4)
-+#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5)
-+#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6)
-+#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7)
-+#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8)
-+#define QCA955X_EXT_INT_PCIE_RC2 BIT(12)
-+#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13)
-+#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14)
-+#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15)
-+#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16)
-+#define QCA955X_EXT_INT_USB1 BIT(24)
-+#define QCA955X_EXT_INT_USB2 BIT(28)
-+
-+#define QCA955X_EXT_INT_WMAC_ALL \
-+ (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \
-+ QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP)
-+
-+#define QCA955X_EXT_INT_PCIE_RC1_ALL \
-+ (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \
-+ QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \
-+ QCA955X_EXT_INT_PCIE_RC1_INT3)
-+
-+#define QCA955X_EXT_INT_PCIE_RC2_ALL \
-+ (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \
-+ QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
-+ QCA955X_EXT_INT_PCIE_RC2_INT3)
-+
- #define REV_ID_MAJOR_MASK 0xfff0
- #define REV_ID_MAJOR_AR71XX 0x00a0
- #define REV_ID_MAJOR_AR913X 0x00b0
---- a/arch/mips/include/asm/mach-ath79/irq.h
-+++ b/arch/mips/include/asm/mach-ath79/irq.h
-@@ -10,7 +10,7 @@
- #define __ASM_MACH_ATH79_IRQ_H
-
- #define MIPS_CPU_IRQ_BASE 0
--#define NR_IRQS 48
-+#define NR_IRQS 51
-
- #define ATH79_MISC_IRQ_BASE 8
- #define ATH79_MISC_IRQ_COUNT 32
-@@ -23,8 +23,13 @@
- #define ATH79_IP2_IRQ_COUNT 2
- #define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x))
-
-+#define ATH79_IP3_IRQ_BASE (ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT)
-+#define ATH79_IP3_IRQ_COUNT 3
-+#define ATH79_IP3_IRQ(_x) (ATH79_IP3_IRQ_BASE + (_x))
-+
- #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
--#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
-+#define ATH79_CPU_IRQ_IP3 (MIPS_CPU_IRQ_BASE + 3)
-+#define ATH79_CPU_IRQ_USB ATH79_CPU_IRQ_IP3
- #define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
- #define ATH79_CPU_IRQ_GE1 (MIPS_CPU_IRQ_BASE + 5)
- #define ATH79_CPU_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6)
diff --git a/target/linux/ar71xx/patches-3.3/164-MIPS-ath79-add-GPIO-setup-code-for-the-QCA955X-SoCs.patch b/target/linux/ar71xx/patches-3.3/164-MIPS-ath79-add-GPIO-setup-code-for-the-QCA955X-SoCs.patch
deleted file mode 100644
index dc4251b..0000000
--- a/target/linux/ar71xx/patches-3.3/164-MIPS-ath79-add-GPIO-setup-code-for-the-QCA955X-SoCs.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From c9a552f3007f0621b2440ae17bad816578299e52 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:45:27 +0200
-Subject: [PATCH 20/34] MIPS: ath79: add GPIO setup code for the QCA955X SoCs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/gpio.c | 4 +++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
- 2 files changed, 4 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -196,12 +196,14 @@ void __init ath79_gpio_init(void)
- ath79_gpio_count = AR933X_GPIO_COUNT;
- else if (soc_is_ar934x())
- ath79_gpio_count = AR934X_GPIO_COUNT;
-+ else if (soc_is_qca955x())
-+ ath79_gpio_count = QCA955X_GPIO_COUNT;
- else
- BUG();
-
- ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
- ath79_gpio_chip.ngpio = ath79_gpio_count;
-- if (soc_is_ar934x()) {
-+ if (soc_is_ar934x() || soc_is_qca955x()) {
- ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
- ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
- }
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -506,6 +506,7 @@
- #define AR913X_GPIO_COUNT 22
- #define AR933X_GPIO_COUNT 30
- #define AR934X_GPIO_COUNT 23
-+#define QCA955X_GPIO_COUNT 24
-
- /*
- * SRIF block
diff --git a/target/linux/ar71xx/patches-3.3/165-MIPS-ath79-add-QCA955X-specific-glue-to-ath79_device.patch b/target/linux/ar71xx/patches-3.3/165-MIPS-ath79-add-QCA955X-specific-glue-to-ath79_device.patch
deleted file mode 100644
index f3e3b6e..0000000
--- a/target/linux/ar71xx/patches-3.3/165-MIPS-ath79-add-QCA955X-specific-glue-to-ath79_device.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 68368e80b4db83afe39664a7d43c8b5c7b8ac3b4 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:49:33 +0200
-Subject: [PATCH 21/34] MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set,clear}
-
----
- arch/mips/ath79/common.c | 6 ++++--
- 1 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -70,7 +70,8 @@ void ath79_device_reset_set(u32 mask)
- reg = AR913X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar933x())
- reg = AR933X_RESET_REG_RESET_MODULE;
-- else if (soc_is_ar934x())
-+ else if (soc_is_ar934x() ||
-+ soc_is_qca955x())
- reg = AR934X_RESET_REG_RESET_MODULE;
- else
- BUG();
-@@ -96,7 +97,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = AR913X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar933x())
- reg = AR933X_RESET_REG_RESET_MODULE;
-- else if (soc_is_ar934x())
-+ else if (soc_is_ar934x() ||
-+ soc_is_qca955x())
- reg = AR934X_RESET_REG_RESET_MODULE;
- else
- BUG();
diff --git a/target/linux/ar71xx/patches-3.3/166-MIPS-ath79-register-UART-for-the-QCA955X-SoCs.patch b/target/linux/ar71xx/patches-3.3/166-MIPS-ath79-register-UART-for-the-QCA955X-SoCs.patch
deleted file mode 100644
index aacb8bb..0000000
--- a/target/linux/ar71xx/patches-3.3/166-MIPS-ath79-register-UART-for-the-QCA955X-SoCs.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From f7d7b362b51c51c1ae80bb7ade2039d6f74d4070 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:46:26 +0200
-Subject: [PATCH 22/34] MIPS: ath79: register UART for the QCA955X SoCs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/dev-common.c | 3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -90,7 +90,8 @@ void __init ath79_register_uart(void)
- if (soc_is_ar71xx() ||
- soc_is_ar724x() ||
- soc_is_ar913x() ||
-- soc_is_ar934x()) {
-+ soc_is_ar934x() ||
-+ soc_is_qca955x()) {
- ath79_uart_data[0].uartclk = clk_get_rate(clk);
- platform_device_register(&ath79_uart_device);
- } else if (soc_is_ar933x()) {
diff --git a/target/linux/ar71xx/patches-3.3/167-MIPS-ath79-add-USB-controller-registration-code-for-.patch b/target/linux/ar71xx/patches-3.3/167-MIPS-ath79-add-USB-controller-registration-code-for-.patch
deleted file mode 100644
index 5a27a9b..0000000
--- a/target/linux/ar71xx/patches-3.3/167-MIPS-ath79-add-USB-controller-registration-code-for-.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From e4ba5e2bffd1f373f57dd692233aa6b7b46ae76c Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:47:35 +0200
-Subject: [PATCH 23/34] MIPS: ath79: add USB controller registration code for the QCA955X SoCs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/dev-usb.c | 46 ++++++++++++++++++++++++
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++
- 2 files changed, 50 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -75,6 +75,8 @@ static void __init ath79_usb_init_resour
- unsigned long size,
- int irq)
- {
-+ memset(res, 0, sizeof(res));
-+
- res[0].flags = IORESOURCE_MEM;
- res[0].start = base;
- res[0].end = base + size - 1;
-@@ -219,6 +221,48 @@ static void __init ar934x_usb_setup(void
- platform_device_register(&ath79_ehci_device);
- }
-
-+static void __init qca955x_usb_setup(void)
-+{
-+ struct platform_device *pdev;
-+
-+ ath79_usb_init_resource(ath79_ehci_resources,
-+ QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
-+ ATH79_IP3_IRQ(0));
-+
-+ pdev = platform_device_register_resndata(NULL, "ehci-platform", 0,
-+ ath79_ehci_resources,
-+ ARRAY_SIZE(ath79_ehci_resources),
-+ &ath79_ehci_pdata_v2,
-+ sizeof(ath79_ehci_pdata_v2));
-+ if (IS_ERR(pdev)) {
-+ pr_err("Unable to register USB %d device, err=%d\n", 0,
-+ (int) PTR_ERR(pdev));
-+ return;
-+ }
-+
-+ pdev->dev.dma_mask = &ath79_ehci_dmamask;
-+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-+
-+ ath79_usb_init_resource(ath79_ehci_resources,
-+ QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
-+ ATH79_IP3_IRQ(1));
-+
-+ pdev = platform_device_register_resndata(NULL, "ehci-platform", 1,
-+ ath79_ehci_resources,
-+ ARRAY_SIZE(ath79_ehci_resources),
-+ &ath79_ehci_pdata_v2,
-+ sizeof(ath79_ehci_pdata_v2));
-+
-+ if (IS_ERR(pdev)) {
-+ pr_err("Unable to register USB %d device, err=%d\n", 1,
-+ (int) PTR_ERR(pdev));
-+ return;
-+ }
-+
-+ pdev->dev.dma_mask = &ath79_ehci_dmamask;
-+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-+}
-+
- void __init ath79_register_usb(void)
- {
- if (soc_is_ar71xx())
-@@ -233,6 +277,8 @@ void __init ath79_register_usb(void)
- ar933x_usb_setup();
- else if (soc_is_ar934x())
- ar934x_usb_setup();
-+ else if (soc_is_qca955x())
-+ qca955x_usb_setup();
- else
- BUG();
- }
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -94,6 +94,10 @@
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-+#define QCA955X_EHCI0_BASE 0x1b000000
-+#define QCA955X_EHCI1_BASE 0x1b400000
-+#define QCA955X_EHCI_SIZE 0x200
-+
- /*
- * DDR_CTRL block
- */
diff --git a/target/linux/ar71xx/patches-3.3/168-MIPS-ath79-add-WMAC-registration-code-for-the-QCA955.patch b/target/linux/ar71xx/patches-3.3/168-MIPS-ath79-add-WMAC-registration-code-for-the-QCA955.patch
deleted file mode 100644
index efc354e..0000000
--- a/target/linux/ar71xx/patches-3.3/168-MIPS-ath79-add-WMAC-registration-code-for-the-QCA955.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 0568e7f92ecf2bfd2af0a5c59b1249fef002c89f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 3 Jul 2012 10:24:43 +0200
-Subject: [PATCH 24/34] MIPS: ath79: add WMAC registration code for the QCA955X SoCs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/Kconfig | 2 +-
- arch/mips/ath79/dev-wmac.c | 20 ++++++++++++++++++++
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
- 3 files changed, 23 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -108,7 +108,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
- def_bool n
-
- endif
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -116,6 +116,24 @@ static void ar934x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
-+static void qca955x_wmac_setup(void)
-+{
-+ u32 t;
-+
-+ ath79_wmac_device.name = "qca955x_wmac";
-+
-+ ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
-+ ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-+
-+ t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
-+ if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
-+ ath79_wmac_data.is_clk_25mhz = false;
-+ else
-+ ath79_wmac_data.is_clk_25mhz = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data)
- {
- if (soc_is_ar913x())
-@@ -124,6 +142,8 @@ void __init ath79_register_wmac(u8 *cal_
- ar933x_wmac_setup();
- else if (soc_is_ar934x())
- ar934x_wmac_setup();
-+ else if (soc_is_qca955x())
-+ qca955x_wmac_setup();
- else
- BUG();
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -94,6 +94,8 @@
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-+#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define QCA955X_WMAC_SIZE 0x20000
- #define QCA955X_EHCI0_BASE 0x1b000000
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x200
diff --git a/target/linux/ar71xx/patches-3.3/169-MIPS-ath79-allow-to-specify-bus-number-in-PCI-IRQ-ma.patch b/target/linux/ar71xx/patches-3.3/169-MIPS-ath79-allow-to-specify-bus-number-in-PCI-IRQ-ma.patch
deleted file mode 100644
index bd95d71..0000000
--- a/target/linux/ar71xx/patches-3.3/169-MIPS-ath79-allow-to-specify-bus-number-in-PCI-IRQ-ma.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 12c68e4fccadc22a0470177141a57892a76e4a2b Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 15:33:16 +0200
-Subject: [PATCH 25/34] MIPS: ath79: allow to specify bus number in PCI IRQ maps
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/pci.c | 4 +++-
- arch/mips/ath79/pci.h | 1 +
- 2 files changed, 4 insertions(+), 1 deletions(-)
-
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -75,7 +75,9 @@ int __init pcibios_map_irq(const struct
- const struct ath79_pci_irq *entry;
-
- entry = &ath79_pci_irq_map[i];
-- if (entry->slot == slot && entry->pin == pin) {
-+ if (entry->bus == dev->bus->number &&
-+ entry->slot == slot &&
-+ entry->pin == pin) {
- irq = entry->irq;
- break;
- }
---- a/arch/mips/ath79/pci.h
-+++ b/arch/mips/ath79/pci.h
-@@ -14,6 +14,7 @@
- #define _ATH79_PCI_H
-
- struct ath79_pci_irq {
-+ int bus;
- u8 slot;
- u8 pin;
- int irq;
diff --git a/target/linux/ar71xx/patches-3.3/170-MIPS-ath79-add-PCI-controller-registration-code-for-.patch b/target/linux/ar71xx/patches-3.3/170-MIPS-ath79-add-PCI-controller-registration-code-for-.patch
deleted file mode 100644
index 0c3889f..0000000
--- a/target/linux/ar71xx/patches-3.3/170-MIPS-ath79-add-PCI-controller-registration-code-for-.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 8bb54348722216a1dd6905d9d031ebdaa3a544a4 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 23:05:20 +0200
-Subject: [PATCH 26/34] MIPS: ath79: add PCI controller registration code for the QCA9558 SoC
-
----
- arch/mips/ath79/Kconfig | 2 +
- arch/mips/ath79/pci.c | 36 ++++++++++++++++++++++++
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 13 ++++++++
- 3 files changed, 51 insertions(+), 0 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -90,6 +90,8 @@ config SOC_AR934X
-
- config SOC_QCA955X
- select USB_ARCH_HAS_EHCI
-+ select HW_HAS_PCI
-+ select PCI_AR724X if PCI
- def_bool n
-
- config PCI_AR724X
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -49,6 +49,21 @@ static const struct ath79_pci_irq ar724x
- }
- };
-
-+static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
-+ {
-+ .bus = 0,
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(0),
-+ },
-+ {
-+ .bus = 1,
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(1),
-+ },
-+};
-+
- int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
- {
- int irq = -1;
-@@ -64,6 +79,9 @@ int __init pcibios_map_irq(const struct
- soc_is_ar9344()) {
- ath79_pci_irq_map = ar724x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
-+ } else if (soc_is_qca955x()) {
-+ ath79_pci_irq_map = qca955x_pci_irq_map;
-+ ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
- } else {
- pr_crit("pci %s: invalid irq map\n",
- pci_name((struct pci_dev *) dev));
-@@ -215,6 +233,24 @@ int __init ath79_register_pci(void)
- AR724X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
-+ } else if (soc_is_qca9558()) {
-+ pdev = ath79_register_pci_ar724x(0,
-+ QCA955X_PCI_CFG_BASE0,
-+ QCA955X_PCI_CTRL_BASE0,
-+ QCA955X_PCI_CRP_BASE0,
-+ QCA955X_PCI_MEM_BASE0,
-+ QCA955X_PCI_MEM_SIZE,
-+ 0,
-+ ATH79_IP2_IRQ(0));
-+
-+ pdev = ath79_register_pci_ar724x(1,
-+ QCA955X_PCI_CFG_BASE1,
-+ QCA955X_PCI_CTRL_BASE1,
-+ QCA955X_PCI_CRP_BASE1,
-+ QCA955X_PCI_MEM_BASE1,
-+ QCA955X_PCI_MEM_SIZE,
-+ 1,
-+ ATH79_IP3_IRQ(2));
- } else {
- /* No PCI support */
- return -ENODEV;
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -94,6 +94,19 @@
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-+#define QCA955X_PCI_MEM_BASE0 0x10000000
-+#define QCA955X_PCI_MEM_BASE1 0x12000000
-+#define QCA955X_PCI_MEM_SIZE 0x02000000
-+#define QCA955X_PCI_CFG_BASE0 0x14000000
-+#define QCA955X_PCI_CFG_BASE1 0x16000000
-+#define QCA955X_PCI_CFG_SIZE 0x1000
-+#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
-+#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
-+#define QCA955X_PCI_CRP_SIZE 0x1000
-+#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000)
-+#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
-+#define QCA955X_PCI_CTRL_SIZE 0x100
-+
- #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define QCA955X_WMAC_SIZE 0x20000
- #define QCA955X_EHCI0_BASE 0x1b000000
diff --git a/target/linux/ar71xx/patches-3.3/171-MIPS-ath79-add-support-for-the-Qualcomm-Atheros-AP13.patch b/target/linux/ar71xx/patches-3.3/171-MIPS-ath79-add-support-for-the-Qualcomm-Atheros-AP13.patch
deleted file mode 100644
index dc26f9c..0000000
--- a/target/linux/ar71xx/patches-3.3/171-MIPS-ath79-add-support-for-the-Qualcomm-Atheros-AP13.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From a034da3e4d4960266a94d15c811d5f4529fdff44 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Jun 2012 13:52:23 +0200
-Subject: [PATCH 27/34] MIPS: ath79: add support for the Qualcomm Atheros AP136 board
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/Kconfig | 12 +++
- arch/mips/ath79/Makefile | 1 +
- arch/mips/ath79/mach-ap136.c | 155 ++++++++++++++++++++++++++++++++++++++++++
- arch/mips/ath79/machtypes.h | 1 +
- 4 files changed, 169 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/ath79/mach-ap136.c
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -14,6 +14,18 @@ config ATH79_MACH_AP121
- Say 'Y' here if you want your kernel to support the
- Atheros AP121 reference board.
-
-+config ATH79_MACH_AP136
-+ bool "Atheros AP136 reference board"
-+ select SOC_QCA955X
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_SPI
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Atheros AP136 reference board.
-+
- config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
- select SOC_AR913X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wma
- # Machines
- #
- obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
-+obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
- obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
- obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
- obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
---- /dev/null
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -0,0 +1,155 @@
-+/*
-+ * Qualcomm Atheros AP136 reference board support
-+ *
-+ * Copyright (c) 2012 Qualcomm Atheros
-+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include "machtypes.h"
-+#include "dev-gpio-buttons.h"
-+#include "dev-leds-gpio.h"
-+#include "dev-spi.h"
-+#include "dev-usb.h"
-+#include "dev-wmac.h"
-+#include "pci.h"
-+
-+#define AP136_GPIO_LED_STATUS_RED 14
-+#define AP136_GPIO_LED_STATUS_GREEN 19
-+#define AP136_GPIO_LED_USB 4
-+#define AP136_GPIO_LED_WLAN_2G 13
-+#define AP136_GPIO_LED_WLAN_5G 12
-+#define AP136_GPIO_LED_WPS_RED 15
-+#define AP136_GPIO_LED_WPS_GREEN 20
-+
-+#define AP136_GPIO_BTN_WPS 16
-+#define AP136_GPIO_BTN_RFKILL 21
-+
-+#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
-+#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-+
-+#define AP136_WMAC_CALDATA_OFFSET 0x1000
-+#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+
-+static struct gpio_led ap136_leds_gpio[] __initdata = {
-+ {
-+ .name = "ap136:green:status",
-+ .gpio = AP136_GPIO_LED_STATUS_GREEN,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "ap136:red:status",
-+ .gpio = AP136_GPIO_LED_STATUS_RED,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "ap136:green:wps",
-+ .gpio = AP136_GPIO_LED_WPS_GREEN,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "ap136:red:wps",
-+ .gpio = AP136_GPIO_LED_WPS_RED,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "ap136:red:wlan-2g",
-+ .gpio = AP136_GPIO_LED_WLAN_2G,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "ap136:red:usb",
-+ .gpio = AP136_GPIO_LED_USB,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
-+ {
-+ .desc = "WPS button",
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP136_GPIO_BTN_WPS,
-+ .active_low = 1,
-+ },
-+ {
-+ .desc = "RFKILL button",
-+ .type = EV_KEY,
-+ .code = KEY_RFKILL,
-+ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP136_GPIO_BTN_RFKILL,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct spi_board_info ap136_spi_info[] = {
-+ {
-+ .bus_num = 0,
-+ .chip_select = 0,
-+ .max_speed_hz = 25000000,
-+ .modalias = "mx25l6405d",
-+ }
-+};
-+
-+static struct ath79_spi_platform_data ap136_spi_data = {
-+ .bus_num = 0,
-+ .num_chipselect = 1,
-+};
-+
-+#ifdef CONFIG_PCI
-+static struct ath9k_platform_data ap136_ath9k_data;
-+
-+static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-+ dev->dev.platform_data = &ap136_ath9k_data;
-+
-+ return 0;
-+}
-+
-+static void __init ap136_pci_init(u8 *eeprom)
-+{
-+ memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-+ sizeof(ap136_ath9k_data.eeprom_data));
-+
-+ ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-+ ath79_register_pci();
-+}
-+#else
-+static inline void ap136_pci_init(void) {}
-+#endif /* CONFIG_PCI */
-+
-+static void __init ap136_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-+ ap136_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap136_gpio_keys),
-+ ap136_gpio_keys);
-+ ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-+ ARRAY_SIZE(ap136_spi_info));
-+ ath79_register_usb();
-+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-+ ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
-+ ap136_setup);
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -17,6 +17,7 @@
- enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
-+ ATH79_MACH_AP136, /* Atheros AP136 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
diff --git a/target/linux/ar71xx/patches-3.3/200-spi-ath79-add-delay-between-SCK-changes.patch b/target/linux/ar71xx/patches-3.3/200-spi-ath79-add-delay-between-SCK-changes.patch
deleted file mode 100644
index 28cc1fb..0000000
--- a/target/linux/ar71xx/patches-3.3/200-spi-ath79-add-delay-between-SCK-changes.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From cbb3ade4765bc715b5c2eae4a7b6eaf3ff7ad958 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Jan 2012 20:06:35 +0100
-Subject: [PATCH 28/34] spi/ath79: add delay between SCK changes
-
-The driver uses the "as fast as it can" approach
-to drive the SCK signal. However this does not
-work with certain low speed SPI chips (e.g. the
-PCF2123 RTC chip). Add per-bit slowdowns in order
-to be able to use the driver with such chips as
-well.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 43 insertions(+), 1 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -24,17 +24,24 @@
- #include <linux/spi/spi_bitbang.h>
- #include <linux/bitops.h>
- #include <linux/gpio.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79_spi_platform.h>
-
- #define DRV_NAME "ath79-spi"
-
-+#define ATH79_SPI_RRW_DELAY_FACTOR 12000
-+#define MHZ (1000 * 1000)
-+
- struct ath79_spi {
- struct spi_bitbang bitbang;
- u32 ioc_base;
- u32 reg_ctrl;
- void __iomem *base;
-+ struct clk *clk;
-+ unsigned rrw_delay;
- };
-
- static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
-@@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_sp
- return spi_master_get_devdata(spi->master);
- }
-
-+static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
-+{
-+ if (nsecs > sp->rrw_delay)
-+ ndelay(nsecs - sp->rrw_delay);
-+}
-+
- static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
- {
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-@@ -184,7 +197,9 @@ static u32 ath79_spi_txrx_mode0(struct s
-
- /* setup MSB (to slave) on trailing edge */
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
-+ ath79_spi_delay(sp, nsecs);
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
-+ ath79_spi_delay(sp, nsecs);
-
- word <<= 1;
- }
-@@ -198,6 +213,7 @@ static __devinit int ath79_spi_probe(str
- struct ath79_spi *sp;
- struct ath79_spi_platform_data *pdata;
- struct resource *r;
-+ unsigned long rate;
- int ret;
-
- master = spi_alloc_master(&pdev->dev, sizeof(*sp));
-@@ -239,12 +255,36 @@ static __devinit int ath79_spi_probe(str
- goto err_put_master;
- }
-
-+ sp->clk = clk_get(&pdev->dev, "ahb");
-+ if (IS_ERR(sp->clk)) {
-+ ret = PTR_ERR(sp->clk);
-+ goto err_unmap;
-+ }
-+
-+ ret = clk_enable(sp->clk);
-+ if (ret)
-+ goto err_clk_put;
-+
-+ rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
-+ if (!rate) {
-+ ret = -EINVAL;
-+ goto err_clk_disable;
-+ }
-+
-+ sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
-+ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
-+ sp->rrw_delay);
-+
- ret = spi_bitbang_start(&sp->bitbang);
- if (ret)
-- goto err_unmap;
-+ goto err_clk_disable;
-
- return 0;
-
-+err_clk_disable:
-+ clk_disable(sp->clk);
-+err_clk_put:
-+ clk_put(sp->clk);
- err_unmap:
- iounmap(sp->base);
- err_put_master:
-@@ -259,6 +299,8 @@ static __devexit int ath79_spi_remove(st
- struct ath79_spi *sp = platform_get_drvdata(pdev);
-
- spi_bitbang_stop(&sp->bitbang);
-+ clk_disable(sp->clk);
-+ clk_put(sp->clk);
- iounmap(sp->base);
- platform_set_drvdata(pdev, NULL);
- spi_master_put(sp->bitbang.master);
diff --git a/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch b/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch
deleted file mode 100644
index fd3d968..0000000
--- a/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From bcb0fdebc08f828b54d0a2eb74a9d1378701a8e0 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Jan 2012 20:33:41 +0100
-Subject: [PATCH 29/34] spi/ath79: add missing HIGH->LOW SCK transition
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -200,6 +200,8 @@ static u32 ath79_spi_txrx_mode0(struct s
- ath79_spi_delay(sp, nsecs);
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
- ath79_spi_delay(sp, nsecs);
-+ if (bits == 1)
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
-
- word <<= 1;
- }
diff --git a/target/linux/ar71xx/patches-3.3/202-spi-ath79-remove-superfluous-chip-select-code.patch b/target/linux/ar71xx/patches-3.3/202-spi-ath79-remove-superfluous-chip-select-code.patch
deleted file mode 100644
index eec3293..0000000
--- a/target/linux/ar71xx/patches-3.3/202-spi-ath79-remove-superfluous-chip-select-code.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 06752f9b169493cd1323f8337c147ad2dd31025c Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 9 Jan 2012 15:03:28 +0100
-Subject: [PATCH 30/34] spi/ath79: remove superfluous chip select code
-
-The spi_bitbang driver calls the chipselect function
-of the driver from spi_bitbang_setup in order to
-deselect the given SPI chip, so we don't have to
-initialize the CS line here.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 6 ------
- 1 files changed, 0 insertions(+), 6 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -128,12 +128,6 @@ static int ath79_spi_setup_cs(struct spi
- gpio_free(cdata->gpio);
- return status;
- }
-- } else {
-- if (spi->mode & SPI_CS_HIGH)
-- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
-- else
-- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
-- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
-
- return 0;
diff --git a/target/linux/ar71xx/patches-3.3/203-spi-ath79-use-gpio_request_one.patch b/target/linux/ar71xx/patches-3.3/203-spi-ath79-use-gpio_request_one.patch
deleted file mode 100644
index 12559bc..0000000
--- a/target/linux/ar71xx/patches-3.3/203-spi-ath79-use-gpio_request_one.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 6bd876a46b977643f27d2cc63f49e1bc84b78134 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 9 Jan 2012 15:04:21 +0100
-Subject: [PATCH 31/34] spi/ath79: use gpio_request_one
-
-Use gpio_request_one() instead of multiple gpiolib calls.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 26 +++++++++++++-------------
- 1 files changed, 13 insertions(+), 13 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -100,6 +100,7 @@ static int ath79_spi_setup_cs(struct spi
- {
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
- struct ath79_spi_controller_data *cdata;
-+ int status;
-
- cdata = spi->controller_data;
- if (spi->chip_select && !cdata)
-@@ -115,22 +116,21 @@ static int ath79_spi_setup_cs(struct spi
- /* TODO: setup speed? */
- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
-
-+ status = 0;
- if (spi->chip_select) {
-- int status = 0;
-+ unsigned long flags;
-
-- status = gpio_request(cdata->gpio, dev_name(&spi->dev));
-- if (status)
-- return status;
--
-- status = gpio_direction_output(cdata->gpio,
-- spi->mode & SPI_CS_HIGH);
-- if (status) {
-- gpio_free(cdata->gpio);
-- return status;
-- }
-+ flags = GPIOF_DIR_OUT;
-+ if (spi->mode & SPI_CS_HIGH)
-+ flags |= GPIOF_INIT_HIGH;
-+ else
-+ flags |= GPIOF_INIT_LOW;
-+
-+ status = gpio_request_one(cdata->gpio, flags,
-+ dev_name(&spi->dev));
- }
-
-- return 0;
-+ return status;
- }
-
- static void ath79_spi_cleanup_cs(struct spi_device *spi)
diff --git a/target/linux/ar71xx/patches-3.3/204-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch b/target/linux/ar71xx/patches-3.3/204-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch
deleted file mode 100644
index 084bd98..0000000
--- a/target/linux/ar71xx/patches-3.3/204-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From e63ceaa0c4f7be0498cd452981073d3ce8e7d1f5 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 9 Jan 2012 15:00:46 +0100
-Subject: [PATCH 32/34] spi/ath79: avoid multiple initialization of the SPI controller
-
-Currently we are initializing the SPI controller in
-the chip select line function, and that function is
-called once for each SPI device on the bus. If a
-board has multiple SPI devices, the controller will
-be initialized multiple times.
-
-Introduce ath79_spi_{en,dis}able helper functions,
-and call those from probe/response in order to avoid
-the mutliple initialization of the controller.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 41 ++++++++++++++++++++++++-----------------
- 1 files changed, 24 insertions(+), 17 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -96,16 +96,8 @@ static void ath79_spi_chipselect(struct
-
- }
-
--static int ath79_spi_setup_cs(struct spi_device *spi)
-+static void ath79_spi_enable(struct ath79_spi *sp)
- {
-- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-- struct ath79_spi_controller_data *cdata;
-- int status;
--
-- cdata = spi->controller_data;
-- if (spi->chip_select && !cdata)
-- return -EINVAL;
--
- /* enable GPIO mode */
- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-
-@@ -115,6 +107,24 @@ static int ath79_spi_setup_cs(struct spi
-
- /* TODO: setup speed? */
- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
-+}
-+
-+static void ath79_spi_disable(struct ath79_spi *sp)
-+{
-+ /* restore CTRL register */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
-+ /* disable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+}
-+
-+static int ath79_spi_setup_cs(struct spi_device *spi)
-+{
-+ struct ath79_spi_controller_data *cdata;
-+ int status;
-+
-+ cdata = spi->controller_data;
-+ if (spi->chip_select && !cdata)
-+ return -EINVAL;
-
- status = 0;
- if (spi->chip_select) {
-@@ -135,17 +145,10 @@ static int ath79_spi_setup_cs(struct spi
-
- static void ath79_spi_cleanup_cs(struct spi_device *spi)
- {
-- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
--
- if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
- gpio_free(cdata->gpio);
- }
--
-- /* restore CTRL register */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
-- /* disable GPIO mode */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
- }
-
- static int ath79_spi_setup(struct spi_device *spi)
-@@ -271,12 +274,15 @@ static __devinit int ath79_spi_probe(str
- dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
- sp->rrw_delay);
-
-+ ath79_spi_enable(sp);
- ret = spi_bitbang_start(&sp->bitbang);
- if (ret)
-- goto err_clk_disable;
-+ goto err_disable;
-
- return 0;
-
-+err_disable:
-+ ath79_spi_disable(sp);
- err_clk_disable:
- clk_disable(sp->clk);
- err_clk_put:
-@@ -295,6 +301,7 @@ static __devexit int ath79_spi_remove(st
- struct ath79_spi *sp = platform_get_drvdata(pdev);
-
- spi_bitbang_stop(&sp->bitbang);
-+ ath79_spi_disable(sp);
- clk_disable(sp->clk);
- clk_put(sp->clk);
- iounmap(sp->base);
diff --git a/target/linux/ar71xx/patches-3.3/205-spi-ath79-add-shutdown-handler.patch b/target/linux/ar71xx/patches-3.3/205-spi-ath79-add-shutdown-handler.patch
deleted file mode 100644
index a1461ce..0000000
--- a/target/linux/ar71xx/patches-3.3/205-spi-ath79-add-shutdown-handler.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From dab305def68a9ea28c1c0ca2fc20bba645944914 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Jan 2012 22:19:32 +0100
-Subject: [PATCH 33/34] spi/ath79: add shutdown handler
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 12 +++++++++++-
- 1 files changed, 11 insertions(+), 1 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -296,7 +296,7 @@ err_put_master:
- return ret;
- }
-
--static __devexit int ath79_spi_remove(struct platform_device *pdev)
-+static void __ath79_spi_remove(struct platform_device *pdev)
- {
- struct ath79_spi *sp = platform_get_drvdata(pdev);
-
-@@ -307,13 +307,23 @@ static __devexit int ath79_spi_remove(st
- iounmap(sp->base);
- platform_set_drvdata(pdev, NULL);
- spi_master_put(sp->bitbang.master);
-+}
-
-+static __devexit int ath79_spi_remove(struct platform_device *pdev)
-+{
-+ __ath79_spi_remove(pdev);
- return 0;
- }
-
-+static void ath79_spi_shutdown(struct platform_device *pdev)
-+{
-+ __ath79_spi_remove(pdev);
-+}
-+
- static struct platform_driver ath79_spi_driver = {
- .probe = ath79_spi_probe,
- .remove = __devexit_p(ath79_spi_remove),
-+ .shutdown = ath79_spi_shutdown,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
diff --git a/target/linux/ar71xx/patches-3.3/206-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.3/206-spi-ath79-make-chipselect-logic-more-flexible.patch
deleted file mode 100644
index 5a4c0df..0000000
--- a/target/linux/ar71xx/patches-3.3/206-spi-ath79-make-chipselect-logic-more-flexible.patch
+++ /dev/null
@@ -1,313 +0,0 @@
-From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Jan 2012 22:25:11 +0100
-Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/mach-ap121.c | 6 ++
- arch/mips/ath79/mach-ap136.c | 6 ++
- arch/mips/ath79/mach-ap81.c | 6 ++
- arch/mips/ath79/mach-db120.c | 6 ++
- arch/mips/ath79/mach-pb44.c | 6 ++
- arch/mips/ath79/mach-ubnt-xm.c | 6 ++
- .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++-
- drivers/spi/spi-ath79.c | 67 +++++++++++++-------
- 8 files changed, 88 insertions(+), 23 deletions(-)
-
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
- }
- };
-
-+static struct ath79_spi_controller_data ap121_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info ap121_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l1606e",
-+ .controller_data = &ap121_spi0_data,
- }
- };
-
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi
- },
- };
-
-+static struct ath79_spi_controller_data ap136_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info ap136_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
-+ .controller_data = &ap136_spi0_data,
- }
- };
-
---- a/arch/mips/ath79/mach-ap81.c
-+++ b/arch/mips/ath79/mach-ap81.c
-@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
- }
- };
-
-+static struct ath79_spi_controller_data ap81_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info ap81_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
-+ .controller_data = &ap81_spi0_data,
- }
- };
-
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi
- },
- };
-
-+static struct ath79_spi_controller_data db120_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info db120_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "s25sl064a",
-+ .controller_data = &db120_spi0_data,
- }
- };
-
---- a/arch/mips/ath79/mach-pb44.c
-+++ b/arch/mips/ath79/mach-pb44.c
-@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
- }
- };
-
-+static struct ath79_spi_controller_data pb44_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info pb44_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
-+ .controller_data = &pb44_spi0_data,
- },
- };
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
- }
- };
-
-+static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info ubnt_xm_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
-+ .controller_data = &ubnt_xm_spi0_data,
- }
- };
-
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
- unsigned num_chipselect;
- };
-
-+enum ath79_spi_cs_type {
-+ ATH79_SPI_CS_TYPE_INTERNAL,
-+ ATH79_SPI_CS_TYPE_GPIO,
-+};
-+
- struct ath79_spi_controller_data {
-- unsigned gpio;
-+ enum ath79_spi_cs_type cs_type;
-+ unsigned cs_line;
- };
-
- #endif /* _ATH79_SPI_PLATFORM_H */
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -35,6 +35,8 @@
- #define ATH79_SPI_RRW_DELAY_FACTOR 12000
- #define MHZ (1000 * 1000)
-
-+#define ATH79_SPI_CS_LINE_MAX 2
-+
- struct ath79_spi {
- struct spi_bitbang bitbang;
- u32 ioc_base;
-@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct
- {
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
- int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
-+ struct ath79_spi_controller_data *cdata = spi->controller_data;
-
- if (is_active) {
- /* set initial clock polarity */
-@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
-
-- if (spi->chip_select) {
-- struct ath79_spi_controller_data *cdata = spi->controller_data;
--
-- /* SPI is normally active-low */
-- gpio_set_value(cdata->gpio, cs_high);
-- } else {
-+ switch (cdata->cs_type) {
-+ case ATH79_SPI_CS_TYPE_INTERNAL:
- if (cs_high)
-- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
-+ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
- else
-- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
-+ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
-
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-- }
-+ break;
-
-+ case ATH79_SPI_CS_TYPE_GPIO:
-+ /* SPI is normally active-low */
-+ if (gpio_cansleep(cdata->cs_line))
-+ gpio_set_value_cansleep(cdata->cs_line, cs_high);
-+ else
-+ gpio_set_value(cdata->cs_line, cs_high);
-+ break;
-+ }
- }
-
- static void ath79_spi_enable(struct ath79_spi *sp)
-@@ -120,24 +127,30 @@ static void ath79_spi_disable(struct ath
- static int ath79_spi_setup_cs(struct spi_device *spi)
- {
- struct ath79_spi_controller_data *cdata;
-+ unsigned long flags;
- int status;
-
- cdata = spi->controller_data;
-- if (spi->chip_select && !cdata)
-+ if (!cdata)
- return -EINVAL;
-
- status = 0;
-- if (spi->chip_select) {
-- unsigned long flags;
-+ switch (cdata->cs_type) {
-+ case ATH79_SPI_CS_TYPE_INTERNAL:
-+ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
-+ status = -EINVAL;
-+ break;
-
-+ case ATH79_SPI_CS_TYPE_GPIO:
- flags = GPIOF_DIR_OUT;
- if (spi->mode & SPI_CS_HIGH)
- flags |= GPIOF_INIT_HIGH;
- else
- flags |= GPIOF_INIT_LOW;
-
-- status = gpio_request_one(cdata->gpio, flags,
-+ status = gpio_request_one(cdata->cs_line, flags,
- dev_name(&spi->dev));
-+ break;
- }
-
- return status;
-@@ -145,9 +158,19 @@ static int ath79_spi_setup_cs(struct spi
-
- static void ath79_spi_cleanup_cs(struct spi_device *spi)
- {
-- if (spi->chip_select) {
-- struct ath79_spi_controller_data *cdata = spi->controller_data;
-- gpio_free(cdata->gpio);
-+ struct ath79_spi_controller_data *cdata;
-+
-+ cdata = spi->controller_data;
-+ if (!cdata)
-+ return;
-+
-+ switch (cdata->cs_type) {
-+ case ATH79_SPI_CS_TYPE_INTERNAL:
-+ /* nothing to do */
-+ break;
-+ case ATH79_SPI_CS_TYPE_GPIO:
-+ gpio_free(cdata->cs_line);
-+ break;
- }
- }
-
-@@ -155,6 +178,9 @@ static int ath79_spi_setup(struct spi_de
- {
- int status = 0;
-
-+ if (spi->controller_data == NULL)
-+ return -EINVAL;
-+
- if (spi->bits_per_word > 32)
- return -EINVAL;
-
-@@ -215,6 +241,10 @@ static __devinit int ath79_spi_probe(str
- unsigned long rate;
- int ret;
-
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata)
-+ return -EINVAL;
-+
- master = spi_alloc_master(&pdev->dev, sizeof(*sp));
- if (master == NULL) {
- dev_err(&pdev->dev, "failed to allocate spi master\n");
-@@ -224,17 +254,10 @@ static __devinit int ath79_spi_probe(str
- sp = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, sp);
-
-- pdata = pdev->dev.platform_data;
--
- master->setup = ath79_spi_setup;
- master->cleanup = ath79_spi_cleanup;
-- if (pdata) {
-- master->bus_num = pdata->bus_num;
-- master->num_chipselect = pdata->num_chipselect;
-- } else {
-- master->bus_num = -1;
-- master->num_chipselect = 1;
-- }
-+ master->bus_num = pdata->bus_num;
-+ master->num_chipselect = pdata->num_chipselect;
-
- sp->bitbang.master = spi_master_get(master);
- sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-simplify-misc-irq-handling.patch b/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-simplify-misc-irq-handling.patch
deleted file mode 100644
index 84a8ca3..0000000
--- a/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-simplify-misc-irq-handling.patch
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -35,44 +35,17 @@ static void ath79_misc_irq_handler(unsig
- pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
- __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-- if (pending & MISC_INT_UART)
-- generic_handle_irq(ATH79_MISC_IRQ_UART);
--
-- else if (pending & MISC_INT_DMA)
-- generic_handle_irq(ATH79_MISC_IRQ_DMA);
--
-- else if (pending & MISC_INT_PERFC)
-- generic_handle_irq(ATH79_MISC_IRQ_PERFC);
--
-- else if (pending & MISC_INT_TIMER)
-- generic_handle_irq(ATH79_MISC_IRQ_TIMER);
--
-- else if (pending & MISC_INT_TIMER2)
-- generic_handle_irq(ATH79_MISC_IRQ_TIMER2);
--
-- else if (pending & MISC_INT_TIMER3)
-- generic_handle_irq(ATH79_MISC_IRQ_TIMER3);
--
-- else if (pending & MISC_INT_TIMER4)
-- generic_handle_irq(ATH79_MISC_IRQ_TIMER4);
--
-- else if (pending & MISC_INT_OHCI)
-- generic_handle_irq(ATH79_MISC_IRQ_OHCI);
--
-- else if (pending & MISC_INT_ERROR)
-- generic_handle_irq(ATH79_MISC_IRQ_ERROR);
--
-- else if (pending & MISC_INT_GPIO)
-- generic_handle_irq(ATH79_MISC_IRQ_GPIO);
--
-- else if (pending & MISC_INT_WDOG)
-- generic_handle_irq(ATH79_MISC_IRQ_WDOG);
-+ if (!pending) {
-+ spurious_interrupt();
-+ return;
-+ }
-
-- else if (pending & MISC_INT_ETHSW)
-- generic_handle_irq(ATH79_MISC_IRQ_ETHSW);
-+ while (pending) {
-+ int bit = __ffs(pending);
-
-- else
-- spurious_interrupt();
-+ generic_handle_irq(ATH79_MISC_IRQ(bit));
-+ pending &= ~BIT(bit);
-+ }
- }
-
- static void ar71xx_misc_irq_unmask(struct irq_data *d)
---- a/arch/mips/include/asm/mach-ath79/irq.h
-+++ b/arch/mips/include/asm/mach-ath79/irq.h
-@@ -14,6 +14,7 @@
-
- #define ATH79_MISC_IRQ_BASE 8
- #define ATH79_MISC_IRQ_COUNT 32
-+#define ATH79_MISC_IRQ(_x) (ATH79_MISC_IRQ_BASE + (_x))
-
- #define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
- #define ATH79_PCI_IRQ_COUNT 6
diff --git a/target/linux/ar71xx/patches-3.3/211-ar933x_uart-improve-serial-clock-calculation.patch b/target/linux/ar71xx/patches-3.3/211-ar933x_uart-improve-serial-clock-calculation.patch
deleted file mode 100644
index 510b75e..0000000
--- a/target/linux/ar71xx/patches-3.3/211-ar933x_uart-improve-serial-clock-calculation.patch
+++ /dev/null
@@ -1,181 +0,0 @@
---- a/drivers/tty/serial/ar933x_uart.c
-+++ b/drivers/tty/serial/ar933x_uart.c
-@@ -25,11 +25,19 @@
- #include <linux/io.h>
- #include <linux/irq.h>
-
-+#include <asm/div64.h>
-+
- #include <asm/mach-ath79/ar933x_uart.h>
- #include <asm/mach-ath79/ar933x_uart_platform.h>
-
- #define DRIVER_NAME "ar933x-uart"
-
-+#define AR933X_UART_MAX_SCALE 0xff
-+#define AR933X_UART_MAX_STEP 0xffff
-+
-+#define AR933X_UART_MIN_BAUD 300
-+#define AR933X_UART_MAX_BAUD 3000000
-+
- #define AR933X_DUMMY_STATUS_RD 0x01
-
- static struct uart_driver ar933x_uart_driver;
-@@ -37,6 +45,8 @@ static struct uart_driver ar933x_uart_dr
- struct ar933x_uart_port {
- struct uart_port port;
- unsigned int ier; /* shadow Interrupt Enable Register */
-+ unsigned int min_baud;
-+ unsigned int max_baud;
- };
-
- static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
-@@ -162,6 +172,57 @@ static void ar933x_uart_enable_ms(struct
- {
- }
-
-+/*
-+ * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17))
-+ */
-+static unsigned long ar933x_uart_get_baud(unsigned int clk,
-+ unsigned int scale,
-+ unsigned int step)
-+{
-+ u64 t;
-+ u32 div;
-+
-+ div = (2 << 16) * (scale + 1);
-+ t = clk;
-+ t *= step;
-+ t += (div / 2);
-+ do_div(t, div);
-+
-+ return t;
-+}
-+
-+static void ar933x_uart_get_scale_step(unsigned int clk,
-+ unsigned int baud,
-+ unsigned int *scale,
-+ unsigned int *step)
-+{
-+ unsigned int tscale;
-+ long min_diff;
-+
-+ *scale = 0;
-+ *step = 0;
-+
-+ min_diff = baud;
-+ for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
-+ u64 tstep;
-+ int diff;
-+
-+ tstep = baud * (tscale + 1);
-+ tstep *= (2 << 16);
-+ do_div(tstep, clk);
-+
-+ if (tstep > AR933X_UART_MAX_STEP)
-+ break;
-+
-+ diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
-+ if (diff < min_diff) {
-+ min_diff = diff;
-+ *scale = tscale;
-+ *step = tstep;
-+ }
-+ }
-+}
-+
- static void ar933x_uart_set_termios(struct uart_port *port,
- struct ktermios *new,
- struct ktermios *old)
-@@ -169,7 +230,7 @@ static void ar933x_uart_set_termios(stru
- struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
- unsigned int cs;
- unsigned long flags;
-- unsigned int baud, scale;
-+ unsigned int baud, scale, step;
-
- /* Only CS8 is supported */
- new->c_cflag &= ~CSIZE;
-@@ -191,8 +252,8 @@ static void ar933x_uart_set_termios(stru
- /* Mark/space parity is not supported */
- new->c_cflag &= ~CMSPAR;
-
-- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
-- scale = (port->uartclk / (16 * baud)) - 1;
-+ baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud);
-+ ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step);
-
- /*
- * Ok, we're now changing the port state. Do it with
-@@ -200,6 +261,10 @@ static void ar933x_uart_set_termios(stru
- */
- spin_lock_irqsave(&up->port.lock, flags);
-
-+ /* disable the UART */
-+ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
-+ AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S);
-+
- /* Update the per-port timeout. */
- uart_update_timeout(port, new->c_cflag, baud);
-
-@@ -210,7 +275,7 @@ static void ar933x_uart_set_termios(stru
- up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
-
- ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
-- scale << AR933X_UART_CLOCK_SCALE_S | 8192);
-+ scale << AR933X_UART_CLOCK_SCALE_S | step);
-
- /* setup configuration register */
- ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
-@@ -219,6 +284,11 @@ static void ar933x_uart_set_termios(stru
- ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
- AR933X_UART_CS_HOST_INT_EN);
-
-+ /* reenable the UART */
-+ ar933x_uart_rmw(up, AR933X_UART_CS_REG,
-+ AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
-+ AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S);
-+
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- if (tty_termios_baud_rate(new))
-@@ -401,6 +471,8 @@ static void ar933x_uart_config_port(stru
- static int ar933x_uart_verify_port(struct uart_port *port,
- struct serial_struct *ser)
- {
-+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
-+
- if (ser->type != PORT_UNKNOWN &&
- ser->type != PORT_AR933X)
- return -EINVAL;
-@@ -408,7 +480,8 @@ static int ar933x_uart_verify_port(struc
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
- return -EINVAL;
-
-- if (ser->baud_base < 28800)
-+ if (ser->baud_base < up->min_baud ||
-+ ser->baud_base > up->max_baud)
- return -EINVAL;
-
- return 0;
-@@ -561,6 +634,7 @@ static int __devinit ar933x_uart_probe(s
- struct uart_port *port;
- struct resource *mem_res;
- struct resource *irq_res;
-+ unsigned int baud;
- int id;
- int ret;
-
-@@ -611,6 +685,12 @@ static int __devinit ar933x_uart_probe(s
- port->fifosize = AR933X_UART_FIFO_SIZE;
- port->ops = &ar933x_uart_ops;
-
-+ baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
-+ up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
-+
-+ baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
-+ up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
-+
- ar933x_uart_add_console_port(up);
-
- ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
diff --git a/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-GPIO-function-selection-for-AR934x-So.patch b/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-GPIO-function-selection-for-AR934x-So.patch
deleted file mode 100644
index 9ffb398..0000000
--- a/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-GPIO-function-selection-for-AR934x-So.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 177dc53a07e2c660d1c1a6cec4576c802325e330 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 14 Nov 2012 09:02:01 +0100
-Subject: [PATCH] MIPS: ath79: fix GPIO function selection for AR934x SoCs
-
-GPIO function selection is not working on the AR934x
-SoCs because the offset of the function selection
-register is different on those.
-
-Add a helper routine which returns the correct
-register address based on the SoC type, and use
-that in the 'ath79_gpio_function_*' routines.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/gpio.c | 38 ++++++++++++++++--------
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
- 2 files changed, 28 insertions(+), 12 deletions(-)
-
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -137,47 +137,61 @@ static struct gpio_chip ath79_gpio_chip
- .base = 0,
- };
-
-+static void __iomem *ath79_gpio_get_function_reg(void)
-+{
-+ u32 reg = 0;
-+
-+ if (soc_is_ar71xx() ||
-+ soc_is_ar724x() ||
-+ soc_is_ar913x() ||
-+ soc_is_ar933x())
-+ reg = AR71XX_GPIO_REG_FUNC;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_GPIO_REG_FUNC;
-+ else
-+ BUG();
-+
-+ return ath79_gpio_base + reg;
-+}
-+
- void ath79_gpio_function_enable(u32 mask)
- {
-- void __iomem *base = ath79_gpio_base;
-+ void __iomem *reg = ath79_gpio_get_function_reg();
- unsigned long flags;
-
- spin_lock_irqsave(&ath79_gpio_lock, flags);
-
-- __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) | mask,
-- base + AR71XX_GPIO_REG_FUNC);
-+ __raw_writel(__raw_readl(reg) | mask, reg);
- /* flush write */
-- __raw_readl(base + AR71XX_GPIO_REG_FUNC);
-+ __raw_readl(reg);
-
- spin_unlock_irqrestore(&ath79_gpio_lock, flags);
- }
-
- void ath79_gpio_function_disable(u32 mask)
- {
-- void __iomem *base = ath79_gpio_base;
-+ void __iomem *reg = ath79_gpio_get_function_reg();
- unsigned long flags;
-
- spin_lock_irqsave(&ath79_gpio_lock, flags);
-
-- __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~mask,
-- base + AR71XX_GPIO_REG_FUNC);
-+ __raw_writel(__raw_readl(reg) & ~mask, reg);
- /* flush write */
-- __raw_readl(base + AR71XX_GPIO_REG_FUNC);
-+ __raw_readl(reg);
-
- spin_unlock_irqrestore(&ath79_gpio_lock, flags);
- }
-
- void ath79_gpio_function_setup(u32 set, u32 clear)
- {
-- void __iomem *base = ath79_gpio_base;
-+ void __iomem *reg = ath79_gpio_get_function_reg();
- unsigned long flags;
-
- spin_lock_irqsave(&ath79_gpio_lock, flags);
-
-- __raw_writel((__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~clear) | set,
-- base + AR71XX_GPIO_REG_FUNC);
-+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
- /* flush write */
-- __raw_readl(base + AR71XX_GPIO_REG_FUNC);
-+ __raw_readl(reg);
-
- spin_unlock_irqrestore(&ath79_gpio_lock, flags);
- }
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -520,6 +520,8 @@
- #define AR71XX_GPIO_REG_INT_ENABLE 0x24
- #define AR71XX_GPIO_REG_FUNC 0x28
-
-+#define AR934X_GPIO_REG_FUNC 0x6c
-+
- #define AR71XX_GPIO_COUNT 16
- #define AR724X_GPIO_COUNT 18
- #define AR913X_GPIO_COUNT 22
diff --git a/target/linux/ar71xx/patches-3.3/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-3.3/310-lib-add-rle-decompression.patch
deleted file mode 100644
index 0cb9462..0000000
--- a/target/linux/ar71xx/patches-3.3/310-lib-add-rle-decompression.patch
+++ /dev/null
@@ -1,114 +0,0 @@
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -124,6 +124,9 @@ config LZMA_COMPRESS
- config LZMA_DECOMPRESS
- tristate
-
-+config RLE_DECOMPRESS
-+ tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -85,6 +85,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
- obj-$(CONFIG_LZMA_COMPRESS) += lzma/
- obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
-+obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
-
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/include/linux/rle.h
-@@ -0,0 +1,8 @@
-+#ifndef _RLE_H_
-+#define _RLE_H_
-+
-+int rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done);
-+
-+#endif /* _RLE_H_ */
---- /dev/null
-+++ b/lib/rle.c
-@@ -0,0 +1,78 @@
-+/*
-+ * RLE decoding routine
-+ *
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/rle.h>
-+
-+int rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done)
-+{
-+ size_t srcpos, dstpos;
-+ int ret;
-+
-+ srcpos = 0;
-+ dstpos = 0;
-+ ret = -EINVAL;
-+
-+ /* sanity checks */
-+ if (!src || !srclen || !dst || !dstlen)
-+ goto out;
-+
-+ while (1) {
-+ char count;
-+
-+ if (srcpos >= srclen)
-+ break;
-+
-+ count = (char) src[srcpos++];
-+ if (count == 0) {
-+ ret = 0;
-+ break;
-+ }
-+
-+ if (count > 0) {
-+ unsigned char c;
-+
-+ if (srcpos >= srclen)
-+ break;
-+
-+ c = src[srcpos++];
-+
-+ while (count--) {
-+ if (dstpos >= dstlen)
-+ break;
-+
-+ dst[dstpos++] = c;
-+ }
-+ } else {
-+ count *= -1;
-+
-+ while (count--) {
-+ if (srcpos >= srclen)
-+ break;
-+ if (dstpos >= dstlen)
-+ break;
-+ dst[dstpos++] = src[srcpos++];
-+ }
-+ }
-+ }
-+
-+out:
-+ if (src_done)
-+ *src_done = srcpos;
-+ if (dst_done)
-+ *dst_done = dstpos;
-+
-+ return ret;
-+}
-+
-+EXPORT_SYMBOL_GPL(rle_decode);
diff --git a/target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch
deleted file mode 100644
index 36e30c2..0000000
--- a/target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch
+++ /dev/null
@@ -1,94 +0,0 @@
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -29,6 +29,66 @@ struct physmap_flash_info {
- struct map_info map[MAX_RESOURCES];
- };
-
-+static struct platform_device *physmap_map2pdev(struct map_info *map)
-+{
-+ return (struct platform_device *) map->map_priv_1;
-+}
-+
-+static void physmap_lock(struct map_info *map)
-+{
-+ struct platform_device *pdev;
-+ struct physmap_flash_data *physmap_data;
-+
-+ pdev = physmap_map2pdev(map);
-+ physmap_data = pdev->dev.platform_data;
-+ physmap_data->lock(pdev);
-+}
-+
-+static void physmap_unlock(struct map_info *map)
-+{
-+ struct platform_device *pdev;
-+ struct physmap_flash_data *physmap_data;
-+
-+ pdev = physmap_map2pdev(map);
-+ physmap_data = pdev->dev.platform_data;
-+ physmap_data->unlock(pdev);
-+}
-+
-+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
-+{
-+ map_word ret;
-+
-+ physmap_lock(map);
-+ ret = inline_map_read(map, ofs);
-+ physmap_unlock(map);
-+
-+ return ret;
-+}
-+
-+static void physmap_flash_write_lock(struct map_info *map, map_word d,
-+ unsigned long ofs)
-+{
-+ physmap_lock(map);
-+ inline_map_write(map, d, ofs);
-+ physmap_unlock(map);
-+}
-+
-+static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
-+ unsigned long from, ssize_t len)
-+{
-+ physmap_lock(map);
-+ inline_map_copy_from(map, to, from, len);
-+ physmap_unlock(map);
-+}
-+
-+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
-+ const void *from, ssize_t len)
-+{
-+ physmap_lock(map);
-+ inline_map_copy_to(map, to, from, len);
-+ physmap_unlock(map);
-+}
-+
- static int physmap_flash_remove(struct platform_device *dev)
- {
- struct physmap_flash_info *info;
-@@ -141,6 +201,13 @@ static int physmap_flash_probe(struct pl
-
- simple_map_init(&info->map[i]);
-
-+ if (physmap_data->lock && physmap_data->unlock) {
-+ info->map[i].read = physmap_flash_read_lock;
-+ info->map[i].write = physmap_flash_write_lock;
-+ info->map[i].copy_from = physmap_flash_copy_from_lock;
-+ info->map[i].copy_to = physmap_flash_copy_to_lock;
-+ }
-+
- probe_type = rom_probe_types;
- if (physmap_data->probe_type == NULL) {
- for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
---- a/include/linux/mtd/physmap.h
-+++ b/include/linux/mtd/physmap.h
-@@ -26,6 +26,8 @@ struct physmap_flash_data {
- unsigned int width;
- int (*init)(struct platform_device *);
- void (*exit)(struct platform_device *);
-+ void (*lock)(struct platform_device *);
-+ void (*unlock)(struct platform_device *);
- void (*set_vpp)(struct platform_device *, int);
- unsigned int nr_parts;
- unsigned int pfow_base;
diff --git a/target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch
deleted file mode 100644
index 246abd5..0000000
--- a/target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -148,6 +148,7 @@
- #define SST39LF160 0x2782
- #define SST39VF1601 0x234b
- #define SST39VF3201 0x235b
-+#define SST39VF6401B 0x236d
- #define SST39WF1601 0x274b
- #define SST39WF1602 0x274a
- #define SST39LF512 0x00D4
-@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x10000,64),
- }
- }, {
-+ .mfr_id = CFI_MFR_SST,
-+ .dev_id = SST39VF6401B,
-+ .name = "SST 39VF6401B",
-+ .devtypes = CFI_DEVICETYPE_X16,
-+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
-+ .dev_size = SIZE_8MiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x10000,128)
-+ }
-+ }, {
- .mfr_id = CFI_MFR_ST,
- .dev_id = M29F800AB,
- .name = "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch
deleted file mode 100644
index 9ed0598..0000000
--- a/target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1214,8 +1214,8 @@ static int __xipram do_write_oneword(str
- break;
- }
-
-- if (chip_ready(map, adr))
-- break;
-+ if (chip_good(map, adr, datum))
-+ goto enable_xip;
-
- /* Latency issues. Drop the lock, wait a while and retry */
- UDELAY(map, chip, adr, 1);
-@@ -1231,6 +1231,8 @@ static int __xipram do_write_oneword(str
-
- ret = -EIO;
- }
-+
-+ enable_xip:
- xip_enable(map, chip, adr);
- op_done:
- chip->state = FL_READY;
-@@ -1563,7 +1565,6 @@ static int cfi_amdstd_write_buffers(stru
- return 0;
- }
-
--
- /*
- * Handle devices with one erase region, that only implement
- * the chip erase command.
-@@ -1627,8 +1628,8 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-- break;
-+ if (chip_good(map, adr, map_word_ff(map)))
-+ goto op_done;
-
- if (time_after(jiffies, timeo)) {
- printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -1648,6 +1649,7 @@ static int __xipram do_erase_chip(struct
- ret = -EIO;
- }
-
-+ op_done:
- chip->state = FL_READY;
- xip_enable(map, chip, adr);
- put_chip(map, chip, adr);
-@@ -1715,9 +1717,9 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
-- break;
-+ goto op_done;
- }
-
- if (time_after(jiffies, timeo)) {
-@@ -1739,6 +1741,7 @@ static int __xipram do_erase_oneblock(st
- ret = -EIO;
- }
-
-+ op_done:
- chip->state = FL_READY;
- put_chip(map, chip, adr);
- mutex_unlock(&chip->mutex);
diff --git a/target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch
deleted file mode 100644
index 75bfbc3..0000000
--- a/target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -156,6 +156,12 @@ config MTD_BCM63XX_PARTS
- This provides partions parsing for BCM63xx devices with CFE
- bootloaders.
-
-+config MTD_WRT160NL_PARTS
-+ tristate "Linksys WRT160NL partitioning support"
-+ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
-+ ---help---
-+ Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- tristate "MyLoader partition parsing"
- depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR) += mtdchar.o
diff --git a/target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch
deleted file mode 100644
index 0214915..0000000
--- a/target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -158,7 +158,7 @@ config MTD_BCM63XX_PARTS
-
- config MTD_WRT160NL_PARTS
- tristate "Linksys WRT160NL partitioning support"
-- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
-+ depends on ATH79_MACH_WRT160NL
- ---help---
- Linksys WRT160NL partitioning support
-
-@@ -178,6 +178,12 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
-+config MTD_TPLINK_PARTS
-+ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
-+ depends on ATH79
-+ ---help---
-+ TBD.
-+
- comment "User Modules And Translation Layers"
-
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
- obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
-
- # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch
deleted file mode 100644
index 8861c61..0000000
--- a/target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch
+++ /dev/null
@@ -1,112 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -100,6 +100,7 @@ struct m25p {
- u16 addr_width;
- u8 erase_opcode;
- u8 *command;
-+ size_t max_read_len;
- };
-
- static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-@@ -352,6 +353,7 @@ static int m25p80_read(struct mtd_info *
- struct m25p *flash = mtd_to_m25p(mtd);
- struct spi_transfer t[2];
- struct spi_message m;
-+ loff_t ofs;
-
- pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
- __func__, (u32)from, len);
-@@ -374,8 +376,6 @@ static int m25p80_read(struct mtd_info *
- t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
- spi_message_add_tail(&t[0], &m);
-
-- t[1].rx_buf = buf;
-- t[1].len = len;
- spi_message_add_tail(&t[1], &m);
-
- /* Byte count starts at zero. */
-@@ -383,13 +383,6 @@ static int m25p80_read(struct mtd_info *
-
- mutex_lock(&flash->lock);
-
-- /* Wait till previous write/erase is done. */
-- if (wait_till_ready(flash)) {
-- /* REVISIT status return?? */
-- mutex_unlock(&flash->lock);
-- return 1;
-- }
--
- /* FIXME switch to OPCODE_FAST_READ. It's required for higher
- * clocks; and at this writing, every chip this driver handles
- * supports that opcode.
-@@ -397,11 +390,44 @@ static int m25p80_read(struct mtd_info *
-
- /* Set up the write data buffer. */
- flash->command[0] = OPCODE_READ;
-- m25p_addr2cmd(flash, from, flash->command);
-
-- spi_sync(flash->spi, &m);
-+ ofs = 0;
-+ while (len) {
-+ size_t readlen;
-+ size_t done;
-+ int ret;
-+
-+ ret = wait_till_ready(flash);
-+ if (ret) {
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-+
-+ if (flash->max_read_len > 0 &&
-+ flash->max_read_len < len)
-+ readlen = flash->max_read_len;
-+ else
-+ readlen = len;
-+
-+ t[1].rx_buf = buf + ofs;
-+ t[1].len = readlen;
-+
-+ m25p_addr2cmd(flash, from + ofs, flash->command);
-+
-+ spi_sync(flash->spi, &m);
-
-- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
-+ done = m.actual_length - m25p_cmdsz(flash) -
-+ FAST_READ_DUMMY_BYTE;
-+ if (done != readlen) {
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-+
-+ ofs += done;
-+ len -= done;
-+ }
-+
-+ *retlen = ofs;
-
- mutex_unlock(&flash->lock);
-
-@@ -925,6 +951,12 @@ static int __devinit m25p_probe(struct s
- flash->mtd.erase = m25p80_erase;
- flash->mtd.read = m25p80_read;
-
-+ if (data && data->max_read_len) {
-+ flash->max_read_len = data->max_read_len;
-+ dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
-+ flash->max_read_len);
-+ }
-+
- /* sst flash chips use AAI word program */
- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
- flash->mtd.write = sst_write;
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -25,6 +25,7 @@ struct flash_platform_data {
-
- char *type;
-
-+ size_t max_read_len;
- /* we'll likely add more ... use JEDEC IDs, etc */
- };
-
diff --git a/target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
deleted file mode 100644
index 14f2de5..0000000
--- a/target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -1018,7 +1018,9 @@ static int __devinit m25p_probe(struct s
- /* partitions should match sector boundaries; and it may be good to
- * use readonly partitions for writeprotected sectors (BP2..BP0).
- */
-- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
-+ return mtd_device_parse_register(&flash->mtd,
-+ data ? data->part_probes : NULL,
-+ &ppdata,
- data ? data->parts : NULL,
- data ? data->nr_parts : 0);
- }
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -24,6 +24,7 @@ struct flash_platform_data {
- unsigned int nr_parts;
-
- char *type;
-+ const char **part_probes;
-
- size_t max_read_len;
- /* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch
deleted file mode 100644
index 59c0b08..0000000
--- a/target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch
+++ /dev/null
@@ -1,45 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -76,6 +76,11 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
- while (mtd_can_have_bb(master) &&
-@@ -83,6 +88,7 @@ static int parse_redboot_partitions(stru
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
-@@ -96,10 +102,6 @@ static int parse_redboot_partitions(stru
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
-
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-@@ -172,6 +174,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
diff --git a/target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch
deleted file mode 100644
index e1a3398..0000000
--- a/target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -536,4 +536,8 @@ config MTD_NAND_FSMC
- Enables support for NAND Flash chips on the ST Microelectronics
- Flexible Static Memory Controller (FSMC)
-
-+config MTD_NAND_RB4XX
-+ tristate "NAND flash driver for RouterBoard 4xx series"
-+ depends on MTD_NAND && ATH79_MACH_RB4XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
diff --git a/target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch
deleted file mode 100644
index d67f720..0000000
--- a/target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -540,4 +540,8 @@ config MTD_NAND_RB4XX
- tristate "NAND flash driver for RouterBoard 4xx series"
- depends on MTD_NAND && ATH79_MACH_RB4XX
-
-+config MTD_NAND_RB750
-+ tristate "NAND flash driver for the RouterBoard 750"
-+ depends on MTD_NAND && ATH79_MACH_RB750
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
diff --git a/target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644
index e4e879b..0000000
--- a/target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_WORD_RETRIES 3
-
-@@ -50,7 +50,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -183,6 +185,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -192,6 +195,7 @@ static void fixup_use_write_buffers(stru
- mtd->write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1374,6 +1378,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1485,7 +1490,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1564,6 +1568,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Handle devices with one erase region, that only implement
diff --git a/target/linux/ar71xx/patches-3.3/412-mtd-m25p80-zero-partition-parser-data.patch b/target/linux/ar71xx/patches-3.3/412-mtd-m25p80-zero-partition-parser-data.patch
deleted file mode 100644
index a667139..0000000
--- a/target/linux/ar71xx/patches-3.3/412-mtd-m25p80-zero-partition-parser-data.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -978,6 +978,7 @@ static int __devinit m25p_probe(struct s
- if (info->flags & M25P_NO_ERASE)
- flash->mtd.flags |= MTD_NO_ERASE;
-
-+ memset(&ppdata, '\0', sizeof(ppdata));
- ppdata.of_node = spi->dev.of_node;
- flash->mtd.dev.parent = &spi->dev;
- flash->page_size = info->page_size;
diff --git a/target/linux/ar71xx/patches-3.3/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-3.3/413-mtd-ar934x-nand-driver.patch
deleted file mode 100644
index 289458f..0000000
--- a/target/linux/ar71xx/patches-3.3/413-mtd-ar934x-nand-driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -544,4 +544,8 @@ config MTD_NAND_RB750
- tristate "NAND flash driver for the RouterBoard 750"
- depends on MTD_NAND && ATH79_MACH_RB750
-
-+config MTD_NAND_AR934X
-+ tristate "NAND flash driver for the Atheros AR934x SoCs"
-+ depends on SOC_AR934X
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_SM_COMMON) += sm_comm
- obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
- obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
- obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
-+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
- obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
- obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
diff --git a/target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch
deleted file mode 100644
index f117133..0000000
--- a/target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -5,7 +5,7 @@
- config NET_VENDOR_ATHEROS
- bool "Atheros devices"
- default y
-- depends on PCI
-+ depends on (PCI || ATH79)
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
-@@ -67,4 +67,6 @@ config ATL1C
- To compile this driver as a module, choose M here. The module
- will be called atl1c.
-
-+source drivers/net/ethernet/atheros/ag71xx/Kconfig
-+
- endif # NET_VENDOR_ATHEROS
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -2,6 +2,7 @@
- # Makefile for the Atheros network device drivers.
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch
deleted file mode 100644
index 3e3902b..0000000
--- a/target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
-
- trailer = skb_tail_pointer(skb) - 4;
- if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
-- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
-+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
- goto out_drop;
-
- source_port = trailer[1] & 7;
diff --git a/target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch
deleted file mode 100644
index bfb0b8e..0000000
--- a/target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -12,6 +12,13 @@ config NET_DSA_MV88E6060
- This enables support for the Marvell 88E6060 ethernet switch
- chip.
-
-+config NET_DSA_MV88E6063
-+ bool "Marvell 88E6063 ethernet switch chip support"
-+ select NET_DSA_TAG_TRAILER
-+ ---help---
-+ This enables support for the Marvell 88E6063 ethernet switch
-+ chip
-+
- config NET_DSA_MV88E6XXX_NEED_PPU
- bool
- default n
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
- mv88e6xxx_drv-y += mv88e6xxx.o
- ifdef CONFIG_NET_DSA_MV88E6123_61_65
diff --git a/target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch
deleted file mode 100644
index f54861b..0000000
--- a/target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -52,8 +52,8 @@ obj-$(CONFIG_IDE) += ide/
- obj-$(CONFIG_SCSI) += scsi/
- obj-$(CONFIG_ATA) += ata/
- obj-$(CONFIG_TARGET_CORE) += target/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-y += net/
- obj-$(CONFIG_ATM) += atm/
- obj-$(CONFIG_FUSION) += message/
diff --git a/target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch b/target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch
deleted file mode 100644
index 67ba43f..0000000
--- a/target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -503,6 +503,8 @@ struct spi_transfer {
- dma_addr_t rx_dma;
-
- unsigned cs_change:1;
-+ unsigned verify:1;
-+ unsigned fast_write:1;
- u8 bits_per_word;
- u16 delay_usecs;
- u32 speed_hz;
-@@ -544,6 +546,7 @@ struct spi_message {
- struct spi_device *spi;
-
- unsigned is_dma_mapped:1;
-+ unsigned fast_read:1;
-
- /* REVISIT: we might want a flag affecting the behavior of the
- * last transfer ... allowing things like "read 16 bit length L"
diff --git a/target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch
deleted file mode 100644
index 6cfe2e8..0000000
--- a/target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -288,6 +288,12 @@ config SPI_PXA2XX
- config SPI_PXA2XX_PCI
- def_bool SPI_PXA2XX && X86_32 && PCI
-
-+config SPI_RB4XX
-+ tristate "Mikrotik RB4XX SPI master"
-+ depends on SPI_MASTER && ATH79_MACH_RB4XX
-+ help
-+ SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C2410 && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
- obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
-+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
- spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch
deleted file mode 100644
index 579315b..0000000
--- a/target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -439,6 +439,13 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_RB4XX_CPLD
-+ tristate "MikroTik RB4XX CPLD driver"
-+ depends on ATH79_MACH_RB4XX
-+ help
-+ SPI driver for the Xilinx CPLD chip present on the
-+ MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
-+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
- spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch b/target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch
deleted file mode 100644
index b4dbcd4..0000000
--- a/target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
- # SPI master controller drivers (bus)
- obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
- obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
-+obj-$(CONFIG_SPI_AP83) += spi-ap83.o
- obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
- obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
- obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -59,6 +59,14 @@ config SPI_ALTERA
- help
- This is the driver for the Altera SPI Controller.
-
-+config SPI_AP83
-+ tristate "Atheros AP83 specific SPI Controller"
-+ depends on SPI_MASTER && ATH79_MACH_AP83
-+ select SPI_BITBANG
-+ help
-+ This is a specific SPI controller driver for the Atheros AP83
-+ reference board.
-+
- config SPI_ATH79
- tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
- depends on ATH79 && GENERIC_GPIO
diff --git a/target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch
deleted file mode 100644
index 1462687..0000000
--- a/target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -454,6 +454,11 @@ config SPI_RB4XX_CPLD
- SPI driver for the Xilinx CPLD chip present on the
- MikroTik RB4xx boards.
-
-+config SPI_VSC7385
-+ tristate "Vitesse VSC7385 ethernet switch driver"
-+ help
-+ SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -61,5 +61,5 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.
- obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
- obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
- obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
-+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
- obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
--
diff --git a/target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch
deleted file mode 100644
index 88d0908..0000000
--- a/target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -418,6 +418,13 @@ config LEDS_TRIGGERS
- These triggers allow kernel events to drive the LEDs and can
- be configured via sysfs. If unsure, say Y.
-
-+config LEDS_WNDR3700_USB
-+ tristate "NETGEAR WNDR3700 USB LED driver"
-+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700
-+ help
-+ This option enables support for the USB LED found on the
-+ NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGER_TIMER
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903
- obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch
deleted file mode 100644
index e8073a2..0000000
--- a/target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -425,6 +425,10 @@ config LEDS_WNDR3700_USB
- This option enables support for the USB LED found on the
- NETGEAR WNDR3700 board.
-
-+config LEDS_RB750
-+ tristate "LED driver for the Mikrotik RouterBOARD 750"
-+ depends on LEDS_CLASS && ATH79_MACH_RB750
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGER_TIMER
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
- obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
- obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
- obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
-+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
- obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
- obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
- obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
diff --git a/target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch
deleted file mode 100644
index 1e67abf..0000000
--- a/target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -489,4 +489,13 @@ config GPIO_TPS65910
- help
- Select this option to enable GPIO driver for the TPS65910
- chip family.
-+
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+ tristate "NXP 74HC153 Dual 4-input multiplexer"
-+ help
-+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+ provides a GPIO interface supporting input mode only.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2
- obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
- obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
- obj-$(CONFIG_PLAT_NOMADIK) += gpio-nomadik.o
-+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o
- obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o
- obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
- obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
diff --git a/target/linux/ar71xx/patches-3.3/460-spi-bitbang-export-spi_bitbang_bufs.patch b/target/linux/ar71xx/patches-3.3/460-spi-bitbang-export-spi_bitbang_bufs.patch
deleted file mode 100644
index 919b85c..0000000
--- a/target/linux/ar71xx/patches-3.3/460-spi-bitbang-export-spi_bitbang_bufs.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/spi/spi-bitbang.c
-+++ b/drivers/spi/spi-bitbang.c
-@@ -234,13 +234,14 @@ void spi_bitbang_cleanup(struct spi_devi
- }
- EXPORT_SYMBOL_GPL(spi_bitbang_cleanup);
-
--static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
-+int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
- {
- struct spi_bitbang_cs *cs = spi->controller_state;
- unsigned nsecs = cs->nsecs;
-
- return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t);
- }
-+EXPORT_SYMBOL_GPL(spi_bitbang_bufs);
-
- /*----------------------------------------------------------------------*/
-
---- a/include/linux/spi/spi_bitbang.h
-+++ b/include/linux/spi/spi_bitbang.h
-@@ -44,6 +44,7 @@ extern void spi_bitbang_cleanup(struct s
- extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
- extern int spi_bitbang_setup_transfer(struct spi_device *spi,
- struct spi_transfer *t);
-+extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t);
-
- /* start or stop queue processing */
- extern int spi_bitbang_start(struct spi_bitbang *spi);
diff --git a/target/linux/ar71xx/patches-3.3/461-spi-add-type-field-to-spi_transfer.patch b/target/linux/ar71xx/patches-3.3/461-spi-add-type-field-to-spi_transfer.patch
deleted file mode 100644
index 850f24a..0000000
--- a/target/linux/ar71xx/patches-3.3/461-spi-add-type-field-to-spi_transfer.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -406,6 +406,12 @@ extern struct spi_master *spi_busnum_to_
-
- /*---------------------------------------------------------------------------*/
-
-+enum spi_transfer_type {
-+ SPI_TRANSFER_GENERIC = 0,
-+ SPI_TRANSFER_FLASH_READ_CMD,
-+ SPI_TRANSFER_FLASH_READ_DATA,
-+};
-+
- /*
- * I/O INTERFACE between SPI controller and protocol drivers
- *
-@@ -508,6 +514,7 @@ struct spi_transfer {
- u8 bits_per_word;
- u16 delay_usecs;
- u32 speed_hz;
-+ enum spi_transfer_type type;
-
- struct list_head transfer_list;
- };
diff --git a/target/linux/ar71xx/patches-3.3/462-mtd-m25p80-set-spi-transfer-type.patch b/target/linux/ar71xx/patches-3.3/462-mtd-m25p80-set-spi-transfer-type.patch
deleted file mode 100644
index 48e69c0..0000000
--- a/target/linux/ar71xx/patches-3.3/462-mtd-m25p80-set-spi-transfer-type.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -372,10 +372,12 @@ static int m25p80_read(struct mtd_info *
- * OPCODE_FAST_READ (if available) is faster.
- * Should add 1 byte DUMMY_BYTE.
- */
-+ t[0].type = SPI_TRANSFER_FLASH_READ_CMD;
- t[0].tx_buf = flash->command;
- t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
- spi_message_add_tail(&t[0], &m);
-
-+ t[1].type = SPI_TRANSFER_FLASH_READ_DATA;
- spi_message_add_tail(&t[1], &m);
-
- /* Byte count starts at zero. */
diff --git a/target/linux/ar71xx/patches-3.3/463-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-3.3/463-spi-ath79-add-fast-flash-read.patch
deleted file mode 100644
index 9ccc4a4..0000000
--- a/target/linux/ar71xx/patches-3.3/463-spi-ath79-add-fast-flash-read.patch
+++ /dev/null
@@ -1,185 +0,0 @@
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -37,6 +37,11 @@
-
- #define ATH79_SPI_CS_LINE_MAX 2
-
-+enum ath79_spi_state {
-+ ATH79_SPI_STATE_WAIT_CMD = 0,
-+ ATH79_SPI_STATE_WAIT_READ,
-+};
-+
- struct ath79_spi {
- struct spi_bitbang bitbang;
- u32 ioc_base;
-@@ -44,6 +49,11 @@ struct ath79_spi {
- void __iomem *base;
- struct clk *clk;
- unsigned rrw_delay;
-+
-+ enum ath79_spi_state state;
-+ u32 clk_div;
-+ unsigned long read_addr;
-+ unsigned long ahb_rate;
- };
-
- static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
-@@ -111,9 +121,6 @@ static void ath79_spi_enable(struct ath7
- /* save CTRL register */
- sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
- sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
--
-- /* TODO: setup speed? */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
- }
-
- static void ath79_spi_disable(struct ath79_spi *sp)
-@@ -232,6 +239,110 @@ static u32 ath79_spi_txrx_mode0(struct s
- return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
- }
-
-+static int ath79_spi_do_read_flash_data(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+
-+ /* disable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+
-+ memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len);
-+
-+ /* enable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-+
-+ /* restore IOC register */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-+
-+ return t->len;
-+}
-+
-+static int ath79_spi_do_read_flash_cmd(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+ int len;
-+ const u8 *p;
-+
-+ sp->read_addr = 0;
-+
-+ len = t->len - 1;
-+ p = t->tx_buf;
-+
-+ while (len--) {
-+ p++;
-+ sp->read_addr <<= 8;
-+ sp->read_addr |= *p;
-+ }
-+
-+ return t->len;
-+}
-+
-+static bool ath79_spi_is_read_cmd(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ return t->type == SPI_TRANSFER_FLASH_READ_CMD;
-+}
-+
-+static bool ath79_spi_is_data_read(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ return t->type == SPI_TRANSFER_FLASH_READ_DATA;
-+}
-+
-+static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+ int ret;
-+
-+ switch (sp->state) {
-+ case ATH79_SPI_STATE_WAIT_CMD:
-+ if (ath79_spi_is_read_cmd(spi, t)) {
-+ ret = ath79_spi_do_read_flash_cmd(spi, t);
-+ sp->state = ATH79_SPI_STATE_WAIT_READ;
-+ } else {
-+ ret = spi_bitbang_bufs(spi, t);
-+ }
-+ break;
-+
-+ case ATH79_SPI_STATE_WAIT_READ:
-+ if (ath79_spi_is_data_read(spi, t)) {
-+ ret = ath79_spi_do_read_flash_data(spi, t);
-+ } else {
-+ dev_warn(&spi->dev, "flash data read expected\n");
-+ ret = -EIO;
-+ }
-+ sp->state = ATH79_SPI_STATE_WAIT_CMD;
-+ break;
-+
-+ default:
-+ BUG();
-+ }
-+
-+ return ret;
-+}
-+
-+static int ath79_spi_setup_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+ struct ath79_spi_controller_data *cdata;
-+ int ret;
-+
-+ ret = spi_bitbang_setup_transfer(spi, t);
-+ if (ret)
-+ return ret;
-+
-+ cdata = spi->controller_data;
-+ if (cdata->is_flash)
-+ sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs;
-+ else
-+ sp->bitbang.txrx_bufs = spi_bitbang_bufs;
-+
-+ return ret;
-+}
-+
- static __devinit int ath79_spi_probe(struct platform_device *pdev)
- {
- struct spi_master *master;
-@@ -254,6 +365,8 @@ static __devinit int ath79_spi_probe(str
- sp = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, sp);
-
-+ sp->state = ATH79_SPI_STATE_WAIT_CMD;
-+
- master->setup = ath79_spi_setup;
- master->cleanup = ath79_spi_cleanup;
- master->bus_num = pdata->bus_num;
-@@ -262,7 +375,7 @@ static __devinit int ath79_spi_probe(str
- sp->bitbang.master = spi_master_get(master);
- sp->bitbang.chipselect = ath79_spi_chipselect;
- sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
-- sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
-+ sp->bitbang.setup_transfer = ath79_spi_setup_transfer;
- sp->bitbang.flags = SPI_CS_HIGH;
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-@@ -287,7 +400,8 @@ static __devinit int ath79_spi_probe(str
- if (ret)
- goto err_clk_put;
-
-- rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
-+ sp->ahb_rate = clk_get_rate(sp->clk);
-+ rate = DIV_ROUND_UP(sp->ahb_rate, MHZ);
- if (!rate) {
- ret = -EINVAL;
- goto err_clk_disable;
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-@@ -24,6 +24,7 @@ enum ath79_spi_cs_type {
- struct ath79_spi_controller_data {
- enum ath79_spi_cs_type cs_type;
- unsigned cs_line;
-+ bool is_flash;
- };
-
- #endif /* _ATH79_SPI_PLATFORM_H */
diff --git a/target/linux/ar71xx/patches-3.3/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-3.3/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
deleted file mode 100644
index 7912384..0000000
--- a/target/linux/ar71xx/patches-3.3/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
+++ /dev/null
@@ -1,111 +0,0 @@
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port) (port)
-+#define __swizzle_addr_q(port) (port)
-+
-+# define ioswabb(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define __mem_ioswabw(a, x) cpu_to_le16(x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabl(a, x) cpu_to_le32(x)
-+# define ioswabq(a, x) (x)
-+# define __mem_ioswabq(a, x) cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -13,6 +13,7 @@
- */
-
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/pci.h>
- #include <linux/resource.h>
- #include <linux/platform_device.h>
-@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
- static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
- static unsigned ath79_pci_nr_irqs __initdata;
-
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
- static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
- {
- .slot = 17,
-@@ -202,12 +206,50 @@ ath79_register_pci_ar724x(int id,
- return pdev;
- }
-
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+ unsigned long phys = CPHYSADDR(port);
-+
-+ return (phys >= AR71XX_PCI_MEM_BASE &&
-+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_b)
-+ return __ath79_pci_swizzle_b(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_w)
-+ return __ath79_pci_swizzle_w(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- int __init ath79_register_pci(void)
- {
- struct platform_device *pdev = NULL;
-
- if (soc_is_ar71xx()) {
- pdev = ath79_register_pci_ar71xx();
-+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
- } else if (soc_is_ar724x()) {
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
diff --git a/target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch
deleted file mode 100644
index f269763..0000000
--- a/target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -175,6 +175,7 @@ endif
- #
- libs-$(CONFIG_ARC) += arch/mips/fw/arc/
- libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
- libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
- libs-y += arch/mips/fw/lib/
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -981,6 +981,9 @@ config MIPS_NILE4
- config MIPS_DISABLE_OBSOLETE_IDE
- bool
-
-+config MYLOADER
-+ bool
-+
- config SYNC_R4K
- bool
-
diff --git a/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
deleted file mode 100644
index bab4f70..0000000
--- a/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -15,6 +15,7 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/irq.h>
-+#include <linux/etherdevice.h>
- #include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-
-@@ -22,6 +23,7 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "dev-wmac.h"
-
-+static u8 ath79_wmac_mac[ETH_ALEN];
- static struct ath9k_platform_data ath79_wmac_data;
-
- static struct resource ath79_wmac_resources[] = {
-@@ -134,7 +136,7 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
--void __init ath79_register_wmac(u8 *cal_data)
-+void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
- ar913x_wmac_setup();
-@@ -151,5 +153,10 @@ void __init ath79_register_wmac(u8 *cal_
- memcpy(ath79_wmac_data.eeprom_data, cal_data,
- sizeof(ath79_wmac_data.eeprom_data));
-
-+ if (mac_addr) {
-+ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
-+ ath79_wmac_data.macaddr = ath79_wmac_mac;
-+ }
-+
- platform_device_register(&ath79_wmac_device);
- }
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -12,6 +12,6 @@
- #ifndef _ATH79_DEV_WMAC_H
- #define _ATH79_DEV_WMAC_H
-
--void ath79_register_wmac(u8 *cal_data);
-+void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
-
- #endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/ath79/mach-ap81.c
-+++ b/arch/mips/ath79/mach-ap81.c
-@@ -98,7 +98,7 @@ static void __init ap81_setup(void)
- ap81_gpio_keys);
- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
- ARRAY_SIZE(ap81_spi_info));
-- ath79_register_wmac(cal_data);
-+ ath79_register_wmac(cal_data, NULL);
- ath79_register_usb();
- }
-
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -134,7 +134,7 @@ static void __init db120_setup(void)
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
-+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
- }
-
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -91,7 +91,7 @@ static void __init ap121_setup(void)
- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(cal_data);
-+ ath79_register_wmac(cal_data, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
diff --git a/target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch b/target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch
deleted file mode 100644
index 0a218a6..0000000
--- a/target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -25,7 +25,9 @@
- #include <asm/mach-ath79/ath79.h>
- #include "common.h"
-
--static void __iomem *ath79_gpio_base;
-+void __iomem *ath79_gpio_base;
-+EXPORT_SYMBOL_GPL(ath79_gpio_base);
-+
- static unsigned long ath79_gpio_count;
- static DEFINE_SPINLOCK(ath79_gpio_lock);
-
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -110,6 +110,7 @@ static inline int soc_is_qca955x(void)
- }
-
- extern void __iomem *ath79_ddr_base;
-+extern void __iomem *ath79_gpio_base;
- extern void __iomem *ath79_pll_base;
- extern void __iomem *ath79_reset_base;
-
diff --git a/target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch b/target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch
deleted file mode 100644
index 81350ca..0000000
--- a/target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -22,6 +22,7 @@
- #include "common.h"
-
- static DEFINE_SPINLOCK(ath79_device_reset_lock);
-+static DEFINE_MUTEX(ath79_flash_mutex);
-
- u32 ath79_cpu_freq;
- EXPORT_SYMBOL_GPL(ath79_cpu_freq);
-@@ -109,3 +110,16 @@ void ath79_device_reset_clear(u32 mask)
- spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
-+
-+void ath79_flash_acquire(void)
-+{
-+ mutex_lock(&ath79_flash_mutex);
-+}
-+EXPORT_SYMBOL_GPL(ath79_flash_acquire);
-+
-+void ath79_flash_release(void)
-+{
-+ mutex_unlock(&ath79_flash_mutex);
-+}
-+EXPORT_SYMBOL_GPL(ath79_flash_release);
-+
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -137,4 +137,7 @@ static inline u32 ath79_reset_rr(unsigne
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
-
-+void ath79_flash_acquire(void);
-+void ath79_flash_release(void);
-+
- #endif /* __ASM_MACH_ATH79_H */
diff --git a/target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch
deleted file mode 100644
index 5578099..0000000
--- a/target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch
+++ /dev/null
@@ -1,45 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -136,6 +136,7 @@ static inline u32 ath79_reset_rr(unsigne
-
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
-+u32 ath79_device_reset_get(u32 mask);
-
- void ath79_flash_acquire(void);
- void ath79_flash_release(void);
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -111,6 +111,32 @@ void ath79_device_reset_clear(u32 mask)
- }
- EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
-
-+u32 ath79_device_reset_get(u32 mask)
-+{
-+ unsigned long flags;
-+ u32 reg;
-+ u32 ret;
-+
-+ if (soc_is_ar71xx())
-+ reg = AR71XX_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar724x())
-+ reg = AR724X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar913x())
-+ reg = AR913X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar933x())
-+ reg = AR933X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_RESET_REG_RESET_MODULE;
-+ else
-+ BUG();
-+
-+ spin_lock_irqsave(&ath79_device_reset_lock, flags);
-+ ret = ath79_reset_rr(reg);
-+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(ath79_device_reset_get);
-+
- void ath79_flash_acquire(void)
- {
- mutex_lock(&ath79_flash_mutex);
diff --git a/target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch
deleted file mode 100644
index 86e136f..0000000
--- a/target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg
- void ath79_gpio_function_enable(u32 mask);
- void ath79_gpio_function_disable(u32 mask);
- void ath79_gpio_function_setup(u32 set, u32 clear);
-+void ath79_gpio_output_select(unsigned gpio, u8 val);
- void ath79_gpio_init(void);
-
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -198,6 +198,34 @@ void ath79_gpio_function_setup(u32 set,
- spin_unlock_irqrestore(&ath79_gpio_lock, flags);
- }
-
-+void __init ath79_gpio_output_select(unsigned gpio, u8 val)
-+{
-+ void __iomem *base = ath79_gpio_base;
-+ unsigned long flags;
-+ unsigned int reg;
-+ u32 t, s;
-+
-+ BUG_ON(!soc_is_ar934x());
-+
-+ if (gpio >= AR934X_GPIO_COUNT)
-+ return;
-+
-+ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
-+ s = 8 * (gpio % 4);
-+
-+ spin_lock_irqsave(&ath79_gpio_lock, flags);
-+
-+ t = __raw_readl(base + reg);
-+ t &= ~(0xff << s);
-+ t |= val << s;
-+ __raw_writel(t, base + reg);
-+
-+ /* flush write */
-+ (void) __raw_readl(base + reg);
-+
-+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
-+}
-+
- void __init ath79_gpio_init(void)
- {
- int err;
diff --git a/target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch
deleted file mode 100644
index aab959b..0000000
--- a/target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -19,6 +19,8 @@
-
- #include "common.h"
-
-+static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
-+
- static inline int is_valid_ram_addr(void *addr)
- {
- if (((u32) addr > KSEG0) &&
-@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void
- return 0;
- }
-
-+static void __init ath79_prom_append_cmdline(const char *name,
-+ const char *value)
-+{
-+ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
-+ " %s=%s", name, value);
-+ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
-+}
-+
-+static const char * __init ath79_prom_find_env(char **envp, const char *name)
-+{
-+ const char *ret = NULL;
-+ int len;
-+ char **p;
-+
-+ if (!is_valid_ram_addr(envp))
-+ return NULL;
-+
-+ len = strlen(name);
-+ for (p = envp; is_valid_ram_addr(*p); p++) {
-+ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
-+ ret = *p + len + 1;
-+ break;
-+ }
-+
-+ /* RedBoot env comes in pointer pairs - key, value */
-+ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
-+ if (is_valid_ram_addr(*(++p))) {
-+ ret = *p;
-+ break;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
- static __init void ath79_prom_init_cmdline(int argc, char **argv)
- {
- int i;
-@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli
-
- void __init prom_init(void)
- {
-+ const char *env;
-+ char **envp;
-+
- ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
-+
-+ envp = (char **)fw_arg2;
-+ if (!strstr(arcs_cmdline, "ethaddr=")) {
-+ env = ath79_prom_find_env(envp, "ethaddr");
-+ if (env)
-+ ath79_prom_append_cmdline("ethaddr", env);
-+ }
-+
-+ if (!strstr(arcs_cmdline, "board=")) {
-+ env = ath79_prom_find_env(envp, "board");
-+ if (env) {
-+ /* Workaround for buggy bootloaders */
-+ if (strcmp(env, "RouterStation") == 0 ||
-+ strcmp(env, "Ubiquiti AR71xx-based board") == 0)
-+ env = "UBNT-RS";
-+
-+ if (strcmp(env, "RouterStation PRO") == 0)
-+ env = "UBNT-RSPRO";
-+
-+ ath79_prom_append_cmdline("board", env);
-+ }
-+ }
- }
-
- void __init prom_free_prom_memory(void)
diff --git a/target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch
deleted file mode 100644
index 67c1faf..0000000
--- a/target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -16,6 +16,7 @@
-
- #include <asm/bootinfo.h>
- #include <asm/addrspace.h>
-+#include <asm/fw/myloader/myloader.h>
-
- #include "common.h"
-
-@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi
- return ret;
- }
-
-+static int __init ath79_prom_init_myloader(void)
-+{
-+ struct myloader_info *mylo;
-+ char mac_buf[32];
-+ unsigned char *mac;
-+
-+ mylo = myloader_get_info();
-+ if (!mylo)
-+ return 0;
-+
-+ switch (mylo->did) {
-+ case DEVID_COMPEX_WP543:
-+ ath79_prom_append_cmdline("board", "WP543");
-+ break;
-+ case DEVID_COMPEX_WPE72:
-+ ath79_prom_append_cmdline("board", "WPE72");
-+ break;
-+ default:
-+ pr_warn("prom: unknown device id: %x\n", mylo->did);
-+ return 0;
-+ }
-+
-+ mac = mylo->macs[0];
-+ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+
-+ ath79_prom_append_cmdline("ethaddr", mac_buf);
-+
-+ return 1;
-+}
-+
- static __init void ath79_prom_init_cmdline(int argc, char **argv)
- {
- int i;
-@@ -88,6 +120,9 @@ void __init prom_init(void)
- const char *env;
- char **envp;
-
-+ if (ath79_prom_init_myloader())
-+ return;
-+
- ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
-
- envp = (char **)fw_arg2;
diff --git a/target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch
deleted file mode 100644
index 72a3b56..0000000
--- a/target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi
- return ret;
- }
-
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+extern char __image_cmdline[];
-+
-+static int __init ath79_use_image_cmdline(void)
-+{
-+ char *p = __image_cmdline;
-+ int replace = 0;
-+
-+ if (*p == '-') {
-+ replace = 1;
-+ p++;
-+ }
-+
-+ if (*p == '\0')
-+ return 0;
-+
-+ if (replace) {
-+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ } else {
-+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ }
-+
-+ return 1;
-+}
-+#else
-+static inline int ath79_use_image_cmdline(void) { return 0; }
-+#endif
-+
- static int __init ath79_prom_init_myloader(void)
- {
- struct myloader_info *mylo;
-@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload
-
- ath79_prom_append_cmdline("ethaddr", mac_buf);
-
-+ ath79_use_image_cmdline();
-+
- return 1;
- }
-
-@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli
- {
- int i;
-
-+ if (ath79_use_image_cmdline())
-+ return;
-+
- if (!is_valid_ram_addr(argv))
- return;
-
diff --git a/target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch
deleted file mode 100644
index 9236c66..0000000
--- a/target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -225,6 +225,8 @@ void __init plat_time_init(void)
- mips_hpt_frequency = clk_get_rate(clk) / 2;
- }
-
-+__setup("board=", mips_machtype_setup);
-+
- static int __init ath79_setup(void)
- {
- ath79_gpio_init();
diff --git a/target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
deleted file mode 100644
index 2d2235e..0000000
--- a/target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -24,7 +24,10 @@
- #include "dev-wmac.h"
-
- static u8 ath79_wmac_mac[ETH_ALEN];
--static struct ath9k_platform_data ath79_wmac_data;
-+
-+static struct ath9k_platform_data ath79_wmac_data = {
-+ .led_pin = -1,
-+};
-
- static struct resource ath79_wmac_resources[] = {
- {
diff --git a/target/linux/ar71xx/patches-3.3/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-3.3/520-MIPS-ath79-enable-UART-function.patch
deleted file mode 100644
index 1cb407f..0000000
--- a/target/linux/ar71xx/patches-3.3/520-MIPS-ath79-enable-UART-function.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -87,6 +87,15 @@ void __init ath79_register_uart(void)
- if (IS_ERR(clk))
- panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
-
-+ if (soc_is_ar71xx())
-+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar724x())
-+ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar913x())
-+ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar933x())
-+ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
-+
- if (soc_is_ar71xx() ||
- soc_is_ar724x() ||
- soc_is_ar913x() ||
diff --git a/target/linux/ar71xx/patches-3.3/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-3.3/521-MIPS-ath79-enable-UART-for-early_serial.patch
deleted file mode 100644
index 489bc96..0000000
--- a/target/linux/ar71xx/patches-3.3/521-MIPS-ath79-enable-UART-for-early_serial.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned
- /* nothing to do */
- }
-
-+static void prom_enable_uart(u32 id)
-+{
-+ void __iomem *gpio_base;
-+ u32 uart_en;
-+ u32 t;
-+
-+ switch (id) {
-+ case REV_ID_MAJOR_AR71XX:
-+ uart_en = AR71XX_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR7240:
-+ case REV_ID_MAJOR_AR7241:
-+ case REV_ID_MAJOR_AR7242:
-+ uart_en = AR724X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR913X:
-+ uart_en = AR913X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9330:
-+ case REV_ID_MAJOR_AR9331:
-+ uart_en = AR933X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9341:
-+ case REV_ID_MAJOR_AR9342:
-+ case REV_ID_MAJOR_AR9344:
-+ /* TODO */
-+ default:
-+ return;
-+ }
-+
-+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
-+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
-+ t |= uart_en;
-+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
-+}
-+
- static void prom_putchar_init(void)
- {
- void __iomem *base;
-@@ -85,8 +125,10 @@ static void prom_putchar_init(void)
-
- default:
- _prom_putchar = prom_putchar_dummy;
-- break;
-+ return;
- }
-+
-+ prom_enable_uart(id);
- }
-
- void prom_putchar(unsigned char ch)
diff --git a/target/linux/ar71xx/patches-3.3/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-3.3/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
deleted file mode 100644
index acf2a3f..0000000
--- a/target/linux/ar71xx/patches-3.3/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -163,3 +163,9 @@ void __init ath79_register_wmac(u8 *cal_
-
- platform_device_register(&ath79_wmac_device);
- }
-+
-+void __init ath79_register_wmac_simple(void)
-+{
-+ ath79_register_wmac(NULL, NULL);
-+ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
-+}
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -13,5 +13,6 @@
- #define _ATH79_DEV_WMAC_H
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
-+void ath79_register_wmac_simple(void);
-
- #endif /* _ATH79_DEV_WMAC_H */
diff --git a/target/linux/ar71xx/patches-3.3/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-3.3/523-MIPS-ath79-OTP-support.patch
deleted file mode 100644
index 5f7fd21..0000000
--- a/target/linux/ar71xx/patches-3.3/523-MIPS-ath79-OTP-support.patch
+++ /dev/null
@@ -1,166 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -139,6 +139,137 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
-+static bool __init
-+ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
-+{
-+ int timeout = 1000;
-+ u32 val;
-+
-+ __raw_readl(base + AR9300_OTP_BASE + (4 * addr));
-+ while (timeout--) {
-+ val = __raw_readl(base + AR9300_OTP_STATUS);
-+ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
-+ break;
-+
-+ udelay(10);
-+ }
-+
-+ if (!timeout)
-+ return false;
-+
-+ *data = __raw_readl(base + AR9300_OTP_READ_DATA);
-+ return true;
-+}
-+
-+static bool __init
-+ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
-+{
-+ u32 data;
-+ int i;
-+
-+ for (i = 0; i < len; i++) {
-+ int offset = 8 * ((addr - i) % 4);
-+
-+ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
-+ return false;
-+
-+ dest[i] = (data >> offset) & 0xff;
-+ }
-+
-+ return true;
-+}
-+
-+static bool __init
-+ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
-+ int dest_start, int dest_len)
-+{
-+ int dest_bytes = 0;
-+ int offset = 0;
-+ int end = addr - len;
-+ u8 hdr[2];
-+
-+ while (addr > end) {
-+ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
-+ return false;
-+
-+ addr -= 2;
-+ offset += hdr[0];
-+
-+ if (offset <= dest_start + dest_len &&
-+ offset + len >= dest_start) {
-+ int data_offset = 0;
-+ int dest_offset = 0;
-+ int copy_len;
-+
-+ if (offset < dest_start)
-+ data_offset = dest_start - offset;
-+ else
-+ dest_offset = offset - dest_start;
-+
-+ copy_len = len - data_offset;
-+ if (copy_len > dest_len - dest_offset)
-+ copy_len = dest_len - dest_offset;
-+
-+ ar93xx_wmac_otp_read(base, addr - data_offset,
-+ dest + dest_offset,
-+ copy_len);
-+
-+ dest_bytes += copy_len;
-+ }
-+ addr -= hdr[1];
-+ }
-+ return !!dest_bytes;
-+}
-+
-+bool __init ar93xx_wmac_read_mac_address(u8 *dest)
-+{
-+ void __iomem *base;
-+ bool ret = false;
-+ int addr = 0x1ff;
-+ unsigned int len;
-+ u32 hdr_u32;
-+ u8 *hdr = (u8 *) &hdr_u32;
-+ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
-+ int mac_start = 2, mac_end = 8;
-+
-+ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
-+ base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE);
-+ while (addr > sizeof(hdr)) {
-+ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr)))
-+ break;
-+
-+ if (hdr_u32 == 0 || hdr_u32 == ~0)
-+ break;
-+
-+ len = (hdr[1] << 4) | (hdr[2] >> 4);
-+ addr -= 4;
-+
-+ switch (hdr[0] >> 5) {
-+ case 0:
-+ if (len < mac_end)
-+ break;
-+
-+ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
-+ ret = true;
-+ break;
-+ case 3:
-+ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
-+ mac_start, 6);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ addr -= len + 2;
-+ }
-+
-+ iounmap(base);
-+ if (ret)
-+ memcpy(dest, mac, 6);
-+
-+ return ret;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -14,5 +14,6 @@
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
- void ath79_register_wmac_simple(void);
-+bool ar93xx_wmac_read_mac_address(u8 *dest);
-
- #endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -113,6 +113,14 @@
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x200
-
-+#define AR9300_OTP_BASE 0x14000
-+#define AR9300_OTP_STATUS 0x15f18
-+#define AR9300_OTP_STATUS_TYPE 0x7
-+#define AR9300_OTP_STATUS_VALID 0x4
-+#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
-+#define AR9300_OTP_STATUS_SM_BUSY 0x1
-+#define AR9300_OTP_READ_DATA 0x15f1c
-+
- /*
- * DDR_CTRL block
- */
diff --git a/target/linux/ar71xx/patches-3.3/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-3.3/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
deleted file mode 100644
index bada5a8..0000000
--- a/target/linux/ar71xx/patches-3.3/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -270,6 +270,16 @@ bool __init ar93xx_wmac_read_mac_address
- return ret;
- }
-
-+void __init ath79_wmac_disable_2ghz(void)
-+{
-+ ath79_wmac_data.disable_2ghz = true;
-+}
-+
-+void __init ath79_wmac_disable_5ghz(void)
-+{
-+ ath79_wmac_data.disable_5ghz = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -14,6 +14,9 @@
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
- void ath79_register_wmac_simple(void);
-+void ath79_wmac_disable_2ghz(void);
-+void ath79_wmac_disable_5ghz(void);
-+
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
- #endif /* _ATH79_DEV_WMAC_H */
diff --git a/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch
deleted file mode 100644
index 7ca7dfc..0000000
--- a/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch
+++ /dev/null
@@ -1,302 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -21,6 +21,10 @@
- #include <linux/bitops.h>
-
- #define AR71XX_APB_BASE 0x18000000
-+#define AR71XX_GE0_BASE 0x19000000
-+#define AR71XX_GE0_SIZE 0x10000
-+#define AR71XX_GE1_BASE 0x1a000000
-+#define AR71XX_GE1_SIZE 0x10000
- #define AR71XX_EHCI_BASE 0x1b000000
- #define AR71XX_EHCI_SIZE 0x1000
- #define AR71XX_OHCI_BASE 0x1c000000
-@@ -40,6 +44,8 @@
- #define AR71XX_PLL_SIZE 0x100
- #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
- #define AR71XX_RESET_SIZE 0x100
-+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR71XX_MII_SIZE 0x100
-
- #define AR71XX_PCI_MEM_BASE 0x10000000
- #define AR71XX_PCI_MEM_SIZE 0x07000000
-@@ -82,17 +88,23 @@
-
- #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
- #define AR933X_UART_SIZE 0x14
-+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR933X_GMAC_SIZE 0x04
- #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR933X_WMAC_SIZE 0x20000
- #define AR933X_EHCI_BASE 0x1b000000
- #define AR933X_EHCI_SIZE 0x1000
-
-+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR934X_GMAC_SIZE 0x14
- #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR934X_WMAC_SIZE 0x20000
- #define AR934X_EHCI_BASE 0x1b000000
- #define AR934X_EHCI_SIZE 0x200
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-+#define AR934X_NFC_BASE 0x1b000200
-+#define AR934X_NFC_SIZE 0xb8
-
- #define QCA955X_PCI_MEM_BASE0 0x10000000
- #define QCA955X_PCI_MEM_BASE1 0x12000000
-@@ -112,6 +124,10 @@
- #define QCA955X_EHCI0_BASE 0x1b000000
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x200
-+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA955X_GMAC_SIZE 0x40
-+#define QCA955X_NFC_BASE 0x1b000200
-+#define QCA955X_NFC_SIZE 0xb8
-
- #define AR9300_OTP_BASE 0x14000
- #define AR9300_OTP_STATUS 0x15f18
-@@ -175,6 +191,9 @@
- #define AR71XX_AHB_DIV_SHIFT 20
- #define AR71XX_AHB_DIV_MASK 0x7
-
-+#define AR71XX_ETH0_PLL_SHIFT 17
-+#define AR71XX_ETH1_PLL_SHIFT 19
-+
- #define AR724X_PLL_REG_CPU_CONFIG 0x00
- #define AR724X_PLL_REG_PCIE_CONFIG 0x18
-
-@@ -187,6 +206,8 @@
- #define AR724X_DDR_DIV_SHIFT 22
- #define AR724X_DDR_DIV_MASK 0x3
-
-+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
-+
- #define AR913X_PLL_REG_CPU_CONFIG 0x00
- #define AR913X_PLL_REG_ETH_CONFIG 0x04
- #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
-@@ -199,6 +220,9 @@
- #define AR913X_AHB_DIV_SHIFT 19
- #define AR913X_AHB_DIV_MASK 0x1
-
-+#define AR913X_ETH0_PLL_SHIFT 20
-+#define AR913X_ETH1_PLL_SHIFT 22
-+
- #define AR933X_PLL_CPU_CONFIG_REG 0x00
- #define AR933X_PLL_CLOCK_CTRL_REG 0x08
-
-@@ -220,6 +244,8 @@
- #define AR934X_PLL_CPU_CONFIG_REG 0x00
- #define AR934X_PLL_DDR_CONFIG_REG 0x04
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
-+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
-
- #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -252,6 +278,8 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-@@ -378,16 +406,50 @@
- #define AR913X_RESET_USB_HOST BIT(5)
- #define AR913X_RESET_USB_PHY BIT(4)
-
-+#define AR933X_RESET_GE1_MDIO BIT(23)
-+#define AR933X_RESET_GE0_MDIO BIT(22)
-+#define AR933X_RESET_GE1_MAC BIT(13)
- #define AR933X_RESET_WMAC BIT(11)
-+#define AR933X_RESET_GE0_MAC BIT(9)
- #define AR933X_RESET_USB_HOST BIT(5)
- #define AR933X_RESET_USB_PHY BIT(4)
- #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
-
-+#define AR934X_RESET_HOST BIT(31)
-+#define AR934X_RESET_SLIC BIT(30)
-+#define AR934X_RESET_HDMA BIT(29)
-+#define AR934X_RESET_EXTERNAL BIT(28)
-+#define AR934X_RESET_RTC BIT(27)
-+#define AR934X_RESET_PCIE_EP_INT BIT(26)
-+#define AR934X_RESET_CHKSUM_ACC BIT(25)
-+#define AR934X_RESET_FULL_CHIP BIT(24)
-+#define AR934X_RESET_GE1_MDIO BIT(23)
-+#define AR934X_RESET_GE0_MDIO BIT(22)
-+#define AR934X_RESET_CPU_NMI BIT(21)
-+#define AR934X_RESET_CPU_COLD BIT(20)
-+#define AR934X_RESET_HOST_RESET_INT BIT(19)
-+#define AR934X_RESET_PCIE_EP BIT(18)
-+#define AR934X_RESET_UART1 BIT(17)
-+#define AR934X_RESET_DDR BIT(16)
-+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define AR934X_RESET_NANDF BIT(14)
-+#define AR934X_RESET_GE1_MAC BIT(13)
-+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
- #define AR934X_RESET_USB_PHY_ANALOG BIT(11)
-+#define AR934X_RESET_HOST_DMA_INT BIT(10)
-+#define AR934X_RESET_GE0_MAC BIT(9)
-+#define AR934X_RESET_ETH_SWITCH BIT(8)
-+#define AR934X_RESET_PCIE_PHY BIT(7)
-+#define AR934X_RESET_PCIE BIT(6)
- #define AR934X_RESET_USB_HOST BIT(5)
- #define AR934X_RESET_USB_PHY BIT(4)
- #define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define AR934X_RESET_LUT BIT(2)
-+#define AR934X_RESET_MBOX BIT(1)
-+#define AR934X_RESET_I2S BIT(0)
-
-+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
-+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
- #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -528,6 +590,12 @@
- #define AR71XX_GPIO_REG_INT_ENABLE 0x24
- #define AR71XX_GPIO_REG_FUNC 0x28
-
-+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
-+#define AR934X_GPIO_REG_OUT_FUNC1 0x30
-+#define AR934X_GPIO_REG_OUT_FUNC2 0x34
-+#define AR934X_GPIO_REG_OUT_FUNC3 0x38
-+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
-+#define AR934X_GPIO_REG_OUT_FUNC5 0x40
- #define AR934X_GPIO_REG_FUNC 0x6c
-
- #define AR71XX_GPIO_COUNT 16
-@@ -558,4 +626,133 @@
- #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
- #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
-
-+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
-+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
-+#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
-+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
-+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
-+
-+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
-+#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
-+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
-+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
-+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
-+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR724X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
-+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
-+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
-+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
-+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
-+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
-+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
-+#define AR913X_GPIO_FUNC_UART_EN BIT(8)
-+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
-+
-+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
-+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
-+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
-+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
-+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
-+#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR933X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17)
-+#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14)
-+#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13)
-+
-+#define AR934X_GPIO_OUT_GPIO 0x00
-+
-+/*
-+ * MII_CTRL block
-+ */
-+#define AR71XX_MII_REG_MII0_CTRL 0x00
-+#define AR71XX_MII_REG_MII1_CTRL 0x04
-+
-+#define AR71XX_MII_CTRL_IF_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_SHIFT 4
-+#define AR71XX_MII_CTRL_SPEED_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_10 0
-+#define AR71XX_MII_CTRL_SPEED_100 1
-+#define AR71XX_MII_CTRL_SPEED_1000 2
-+
-+#define AR71XX_MII0_CTRL_IF_GMII 0
-+#define AR71XX_MII0_CTRL_IF_MII 1
-+#define AR71XX_MII0_CTRL_IF_RGMII 2
-+#define AR71XX_MII0_CTRL_IF_RMII 3
-+
-+#define AR71XX_MII1_CTRL_IF_RGMII 0
-+#define AR71XX_MII1_CTRL_IF_RMII 1
-+
-+/*
-+ * AR933X GMAC interface
-+ */
-+#define AR933X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
-+#define AR933X_ETH_CFG_MII_GE0 BIT(1)
-+#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
-+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
-+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
-+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
-+#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
-+
-+/*
-+ * AR934X GMAC Interface
-+ */
-+#define AR934X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
-+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
-+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
-+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
-+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
-+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
-+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
-+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
-+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
-+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
-+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+
-+/*
-+ * QCA955X GMAC Interface
-+ */
-+
-+#define QCA955X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0)
-+#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6)
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch
deleted file mode 100644
index e61496f..0000000
--- a/target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch
+++ /dev/null
@@ -1,76 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -106,6 +106,20 @@ config SOC_QCA955X
- select PCI_AR724X if PCI
- def_bool n
-
-+config ATH79_DEV_M25P80
-+ select ATH79_DEV_SPI
-+ def_bool n
-+
-+config ATH79_DEV_AP9X_PCI
-+ select ATH79_PCI_ATH9K_FIXUP
-+ def_bool n
-+
-+config ATH79_DEV_DSA
-+ def_bool n
-+
-+config ATH79_DEV_ETH
-+ def_bool n
-+
- config PCI_AR724X
- def_bool n
-
-@@ -115,6 +129,10 @@ config ATH79_DEV_GPIO_BUTTONS
- config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-+config ATH79_DEV_NFC
-+ depends on (SOC_AR934X)
-+ def_bool n
-+
- config ATH79_DEV_SPI
- def_bool n
-
-@@ -125,4 +143,13 @@ config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
- def_bool n
-
-+config ATH79_NVRAM
-+ def_bool n
-+
-+config ATH79_PCI_ATH9K_FIXUP
-+ def_bool n
-+
-+config ATH79_ROUTERBOOT
-+ def_bool n
-+
- endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI) += pci.o
- # Devices
- #
- obj-y += dev-common.o
-+obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o
-+obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o
-+obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o
- obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
- obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
-+obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o
-+obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o
- obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
- obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
- obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
-
- #
-+# Miscellaneous objects
-+#
-+obj-$(CONFIG_ATH79_NVRAM) += nvram.o
-+obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o
-+obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o
-+
-+#
- # Machines
- #
- obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
diff --git a/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch
deleted file mode 100644
index 1cacde6..0000000
--- a/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch
+++ /dev/null
@@ -1,163 +0,0 @@
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -1,19 +1,21 @@
- /*
- * Atheros AP121 board support
- *
-- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
--#include "machtypes.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
-+#include "machtypes.h"
-
- #define AP121_GPIO_LED_WLAN 0
- #define AP121_GPIO_LED_USB 1
-@@ -24,7 +26,14 @@
- #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
-
--#define AP121_CAL_DATA_ADDR 0x1fff1000
-+#define AP121_MAC0_OFFSET 0x0000
-+#define AP121_MAC1_OFFSET 0x0006
-+#define AP121_CALDATA_OFFSET 0x1000
-+#define AP121_WMAC_MAC_OFFSET 0x1002
-+
-+#define AP121_MINI_GPIO_LED_WLAN 0
-+#define AP121_MINI_GPIO_BTN_JUMPSTART 12
-+#define AP121_MINI_GPIO_BTN_RESET 11
-
- static struct gpio_led ap121_leds_gpio[] __initdata = {
- {
-@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi
- }
- };
-
--static struct ath79_spi_controller_data ap121_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
-+static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
-+ {
-+ .name = "ap121:green:wlan",
-+ .gpio = AP121_MINI_GPIO_LED_WLAN,
-+ .active_low = 0,
-+ },
- };
-
--static struct spi_board_info ap121_spi_info[] = {
-+static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l1606e",
-- .controller_data = &ap121_spi0_data,
-+ .desc = "jumpstart button",
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART,
-+ .active_low = 1,
-+ },
-+ {
-+ .desc = "reset button",
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP121_MINI_GPIO_BTN_RESET,
-+ .active_low = 1,
- }
- };
-
--static struct ath79_spi_platform_data ap121_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
-+static void __init ap121_common_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+ ath79_register_wmac(art + AP121_CALDATA_OFFSET,
-+ art + AP121_WMAC_MAC_OFFSET);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
-+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ /* LAN ports */
-+ ath79_register_eth(1);
-+
-+ /* WAN port */
-+ ath79_register_eth(0);
-+}
-
- static void __init ap121_setup(void)
- {
-- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
-+ ap121_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
- ap121_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap121_gpio_keys),
- ap121_gpio_keys);
--
-- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
-- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(cal_data, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
- ap121_setup);
-+
-+static void __init ap121_mini_setup(void)
-+{
-+ ap121_common_setup();
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
-+ ap121_mini_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap121_mini_gpio_keys),
-+ ap121_mini_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
-+ ap121_mini_setup);
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
- config ATH79_MACH_AP121
- bool "Atheros AP121 reference board"
- select SOC_AR933X
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -17,6 +17,7 @@
- enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
-+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
- ATH79_MACH_AP136, /* Atheros AP136 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
diff --git a/target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch
deleted file mode 100644
index 3cc012d..0000000
--- a/target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch
+++ /dev/null
@@ -1,128 +0,0 @@
---- a/arch/mips/ath79/mach-ap81.c
-+++ b/arch/mips/ath79/mach-ap81.c
-@@ -9,12 +9,16 @@
- * by the Free Software Foundation.
- */
-
--#include "machtypes.h"
--#include "dev-wmac.h"
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
- #include "dev-usb.h"
-+#include "dev-wmac.h"
-+#include "machtypes.h"
-
- #define AP81_GPIO_LED_STATUS 1
- #define AP81_GPIO_LED_AOSS 3
-@@ -29,6 +33,37 @@
-
- #define AP81_CAL_DATA_ADDR 0x1fff1000
-
-+static struct mtd_partition ap81_partitions[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0,
-+ .size = 0x040000,
-+ .mask_flags = MTD_WRITEABLE,
-+ }, {
-+ .name = "u-boot-env",
-+ .offset = 0x040000,
-+ .size = 0x010000,
-+ }, {
-+ .name = "rootfs",
-+ .offset = 0x050000,
-+ .size = 0x500000,
-+ }, {
-+ .name = "uImage",
-+ .offset = 0x550000,
-+ .size = 0x100000,
-+ }, {
-+ .name = "ART",
-+ .offset = 0x650000,
-+ .size = 0x1b0000,
-+ .mask_flags = MTD_WRITEABLE,
-+ }
-+};
-+
-+static struct flash_platform_data ap81_flash_data = {
-+ .parts = ap81_partitions,
-+ .nr_parts = ARRAY_SIZE(ap81_partitions),
-+};
-+
- static struct gpio_led ap81_leds_gpio[] __initdata = {
- {
- .name = "ap81:green:status",
-@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
- }
- };
-
--static struct ath79_spi_controller_data ap81_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
--};
--
--static struct spi_board_info ap81_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "m25p64",
-- .controller_data = &ap81_spi0_data,
-- }
--};
--
--static struct ath79_spi_platform_data ap81_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
- static void __init ap81_setup(void)
- {
- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
-@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap81_gpio_keys),
- ap81_gpio_keys);
-- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
-- ARRAY_SIZE(ap81_spi_info));
-+ ath79_register_m25p80(&ap81_flash_data);
- ath79_register_wmac(cal_data, NULL);
- ath79_register_usb();
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-+ ath79_eth0_data.speed = SPEED_100;
-+ ath79_eth0_data.duplex = DUPLEX_FULL;
-+ ath79_eth0_data.has_ar8216 = 1;
-+
-+ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-+ ath79_eth1_data.phy_mask = 0x10;
-+
-+ ath79_register_eth(0);
-+ ath79_register_eth(1);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -30,9 +30,10 @@ config ATH79_MACH_AP136
- config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
- select SOC_AR913X
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
diff --git a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
deleted file mode 100644
index 97d8b53..0000000
--- a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
+++ /dev/null
@@ -1,209 +0,0 @@
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -2,7 +2,7 @@
- * Atheros DB120 reference board support
- *
- * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
-@@ -19,16 +19,26 @@
- */
-
- #include <linux/pci.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
-+#define DB120_GPIO_LED_USB 11
- #define DB120_GPIO_LED_WLAN_5G 12
- #define DB120_GPIO_LED_WLAN_2G 13
- #define DB120_GPIO_LED_STATUS 14
-@@ -39,8 +49,10 @@
- #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
- #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
-+#define DB120_MAC0_OFFSET 0
-+#define DB120_MAC1_OFFSET 6
-+#define DB120_WMAC_CALDATA_OFFSET 0x1000
-+#define DB120_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led db120_leds_gpio[] __initdata = {
- {
-@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
- .gpio = DB120_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-+ {
-+ .name = "db120:green:usb",
-+ .gpio = DB120_GPIO_LED_USB,
-+ .active_low = 1,
-+ }
- };
-
- static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi
- },
- };
-
--static struct ath79_spi_controller_data db120_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
-+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
-+ .mode = AR8327_PAD_MAC_RGMII,
-+ .txclk_delay_en = true,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
-
--static struct spi_board_info db120_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "s25sl064a",
-- .controller_data = &db120_spi0_data,
-- }
-+static struct ar8327_led_cfg db120_ar8327_led_cfg = {
-+ .led_ctrl0 = 0x00000000,
-+ .led_ctrl1 = 0xc737c737,
-+ .led_ctrl2 = 0x00000000,
-+ .led_ctrl3 = 0x00c30c00,
-+ .open_drain = true,
- };
-
--static struct ath79_spi_platform_data db120_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct ar8327_platform_data db120_ar8327_data = {
-+ .pad0_cfg = &db120_ar8327_pad0_cfg,
-+ .cpuport_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+ .led_cfg = &db120_ar8327_led_cfg,
- };
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &db120_ath9k_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
-- memcpy(db120_ath9k_data.eeprom_data, eeprom,
-- sizeof(db120_ath9k_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(void) {}
--#endif /* CONFIG_PCI */
-+static struct mdio_board_info db120_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &db120_ar8327_data,
-+ },
-+};
-
- static void __init db120_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
-+ ath79_register_m25p80(NULL);
-+
- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
- db120_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(db120_gpio_keys),
- db120_gpio_keys);
-- ath79_register_spi(&db120_spi_data, db120_spi_info,
-- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
-- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
-+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
-+
-+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
-+ AR934X_ETH_CFG_SW_ONLY_MODE);
-+
-+ ath79_register_mdio(1, 0x0);
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(db120_mdio0_info,
-+ ARRAY_SIZE(db120_mdio0_info));
-+
-+ /* GMAC0 is connected to an AR8327 switch */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+ ath79_register_eth(0);
-+
-+ /* GMAC1 is connected to the internal switch */
-+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+ ath79_register_eth(1);
-+
-+ ath79_register_nfc();
- }
-
- MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
- config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
diff --git a/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch
deleted file mode 100644
index f9ec775..0000000
--- a/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch
+++ /dev/null
@@ -1,153 +0,0 @@
---- a/arch/mips/ath79/mach-pb44.c
-+++ b/arch/mips/ath79/mach-pb44.c
-@@ -8,23 +8,48 @@
- * by the Free Software Foundation.
- */
-
-+#include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/i2c/pcf857x.h>
-+#include <linux/i2c/pcf857x.h>
-+#include <linux/spi/flash.h>
-+#include <linux/spi/vsc7385.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+#include <asm/mach-ath79/ath79.h>
-+
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
-+#include "machtypes.h"
- #include "pci.h"
-
- #define PB44_GPIO_I2C_SCL 0
- #define PB44_GPIO_I2C_SDA 1
-
-+#define PB44_PCF8757_VSC7395_CS 0
-+#define PB44_PCF8757_STEREO_CS 1
-+#define PB44_PCF8757_SLIC_CS0 2
-+#define PB44_PCF8757_SLIC_TEST 3
-+#define PB44_PCF8757_SLIC_INT0 4
-+#define PB44_PCF8757_SLIC_INT1 5
-+#define PB44_PCF8757_SW_RESET 6
-+#define PB44_PCF8757_SW_JUMP 8
-+#define PB44_PCF8757_LED_JUMP1 9
-+#define PB44_PCF8757_LED_JUMP2 10
-+#define PB44_PCF8757_TP24 11
-+#define PB44_PCF8757_TP25 12
-+#define PB44_PCF8757_TP26 13
-+#define PB44_PCF8757_TP27 14
-+#define PB44_PCF8757_TP28 15
-+
- #define PB44_GPIO_EXP_BASE 16
-+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
- #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
- #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
- #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
-@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
- .cs_line = 0,
- };
-
-+static struct ath79_spi_controller_data pb44_spi1_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_GPIO,
-+ .cs_line = PB44_GPIO_VSC7395_CS,
-+};
-+
-+static void pb44_vsc7395_reset(void)
-+{
-+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
-+ udelay(10);
-+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
-+ mdelay(50);
-+}
-+
-+static struct vsc7385_platform_data pb44_vsc7395_data = {
-+ .reset = pb44_vsc7395_reset,
-+ .ucode_name = "vsc7395_ucode_pb44.bin",
-+ .mac_cfg = {
-+ .tx_ipg = 6,
-+ .bit2 = 1,
-+ .clk_sel = 0,
-+ },
-+};
-+
-+static const char *pb44_part_probes[] = {
-+ "RedBoot",
-+ NULL,
-+};
-+
-+static struct flash_platform_data pb44_flash_data = {
-+ .part_probes = pb44_part_probes,
-+};
-+
- static struct spi_board_info pb44_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
-+ .platform_data = &pb44_flash_data,
- .controller_data = &pb44_spi0_data,
- },
-+ {
-+ .bus_num = 0,
-+ .chip_select = 1,
-+ .max_speed_hz = 25000000,
-+ .modalias = "spi-vsc7385",
-+ .platform_data = &pb44_vsc7395_data,
-+ .controller_data = &pb44_spi1_data,
-+ }
- };
-
- static struct ath79_spi_platform_data pb44_spi_data = {
- .bus_num = 0,
-- .num_chipselect = 1,
-+ .num_chipselect = 2,
- };
-
-+#define PB44_WAN_PHYMASK BIT(0)
-+#define PB44_LAN_PHYMASK 0
-+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
-+
- static void __init pb44_init(void)
- {
- i2c_register_board_info(0, pb44_i2c_board_info,
-@@ -122,6 +192,22 @@ static void __init pb44_init(void)
- ARRAY_SIZE(pb44_spi_info));
- ath79_register_usb();
- ath79_register_pci();
-+
-+ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
-+
-+ ath79_register_eth(0);
-+
-+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+ ath79_eth1_pll_data.pll_1000 = 0x110000;
-+
-+ ath79_register_eth(1);
- }
-
- MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -58,6 +58,7 @@ config ATH79_MACH_DB120
- config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
diff --git a/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch
deleted file mode 100644
index cbbe20b..0000000
--- a/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch
+++ /dev/null
@@ -1,109 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -70,9 +70,10 @@ config ATH79_MACH_PB44
- config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM (rev 1.0) board"
- select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -16,10 +16,11 @@
-
- #include <asm/mach-ath79/irq.h>
-
--#include "machtypes.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
-+#include "machtypes.h"
- #include "pci.h"
-
- #define UBNT_XM_GPIO_LED_L1 0
-@@ -32,7 +33,7 @@
- #define UBNT_XM_KEYS_POLL_INTERVAL 20
- #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-
--#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
-+#define UBNT_XM_EEPROM_ADDR 0x1fff1000
-
- static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- {
-@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
- }
- };
-
--static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
--};
--
--static struct spi_board_info ubnt_xm_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- .controller_data = &ubnt_xm_spi0_data,
-- }
--};
--
--static struct ath79_spi_platform_data ubnt_xm_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ubnt_xm_eeprom_data;
--
--static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &ubnt_xm_eeprom_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init ubnt_xm_pci_init(void)
--{
-- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
-- sizeof(ubnt_xm_eeprom_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void ubnt_xm_pci_init(void) {}
--#endif /* CONFIG_PCI */
--
- static void __init ubnt_xm_init(void)
- {
-+ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
-+
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- ubnt_xm_leds_gpio);
-
-@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void)
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
-- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
-- ARRAY_SIZE(ubnt_xm_spi_info));
--
-- ubnt_xm_pci_init();
-+ ath79_register_m25p80(NULL);
-+ ap91_pci_init(eeprom, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_UBNT_XM,
diff --git a/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
deleted file mode 100644
index 65576b6..0000000
--- a/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
+++ /dev/null
@@ -1,343 +0,0 @@
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -12,16 +12,22 @@
-
- #include <linux/init.h>
- #include <linux/pci.h>
-+#include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ar8216_platform.h>
-
- #include <asm/mach-ath79/irq.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-
- #include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-m25p80.h"
-+#include "dev-usb.h"
-+#include "dev-wmac.h"
- #include "machtypes.h"
--#include "pci.h"
-
- #define UBNT_XM_GPIO_LED_L1 0
- #define UBNT_XM_GPIO_LED_L2 1
-@@ -37,19 +43,19 @@
-
- static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- {
-- .name = "ubnt-xm:red:link1",
-+ .name = "ubnt:red:link1",
- .gpio = UBNT_XM_GPIO_LED_L1,
- .active_low = 0,
- }, {
-- .name = "ubnt-xm:orange:link2",
-+ .name = "ubnt:orange:link2",
- .gpio = UBNT_XM_GPIO_LED_L2,
- .active_low = 0,
- }, {
-- .name = "ubnt-xm:green:link3",
-+ .name = "ubnt:green:link3",
- .gpio = UBNT_XM_GPIO_LED_L3,
- .active_low = 0,
- }, {
-- .name = "ubnt-xm:green:link4",
-+ .name = "ubnt:green:link4",
- .gpio = UBNT_XM_GPIO_LED_L4,
- .active_low = 0,
- },
-@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g
- }
- };
-
-+#define UBNT_M_WAN_PHYMASK BIT(4)
-+
- static void __init ubnt_xm_init(void)
- {
- u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
-+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- ubnt_xm_leds_gpio);
-@@ -79,9 +89,242 @@ static void __init ubnt_xm_init(void)
-
- ath79_register_m25p80(NULL);
- ap91_pci_init(eeprom, NULL);
-+
-+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-+ ath79_register_eth(0);
- }
-
- MIPS_MACHINE(ATH79_MACH_UBNT_XM,
- "UBNT-XM",
- "Ubiquiti Networks XM (rev 1.0) board",
- ubnt_xm_init);
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
-+ ubnt_xm_init);
-+
-+static void __init ubnt_rocket_m_setup(void)
-+{
-+ ubnt_xm_init();
-+ ath79_register_usb();
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
-+ ubnt_rocket_m_setup);
-+
-+static void __init ubnt_nano_m_setup(void)
-+{
-+ ubnt_xm_init();
-+ ath79_register_eth(1);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
-+ ubnt_nano_m_setup);
-+
-+static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
-+ {
-+ .name = "ubnt:green:globe",
-+ .gpio = 0,
-+ .active_low = 1,
-+ }, {
-+ .name = "ubnt:green:power",
-+ .gpio = 11,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_ON,
-+ }
-+};
-+
-+static void __init ubnt_airrouter_setup(void)
-+{
-+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+ ath79_register_m25p80(NULL);
-+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
-+
-+ ath79_register_eth(1);
-+ ath79_register_eth(0);
-+ ath79_register_usb();
-+
-+ ap91_pci_init(ee, NULL);
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
-+ ubnt_airrouter_leds_gpio);
-+
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ubnt_xm_gpio_keys),
-+ ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
-+ ubnt_airrouter_setup);
-+
-+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
-+ {
-+ .name = "ubnt:orange:dome",
-+ .gpio = 1,
-+ .active_low = 0,
-+ }, {
-+ .name = "ubnt:green:dome",
-+ .gpio = 0,
-+ .active_low = 0,
-+ }
-+};
-+
-+static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
-+ {
-+ .name = "ubnt:orange:front",
-+ .gpio = 1,
-+ .active_low = 0,
-+ }, {
-+ .name = "ubnt:green:front",
-+ .gpio = 0,
-+ .active_low = 0,
-+ }
-+};
-+
-+static void __init ubnt_unifi_setup(void)
-+{
-+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-+ ath79_register_eth(0);
-+
-+ ap91_pci_init(ee, NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
-+ ubnt_unifi_leds_gpio);
-+
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ubnt_xm_gpio_keys),
-+ ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
-+ ubnt_unifi_setup);
-+
-+
-+#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4)
-+#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-+
-+static void __init ubnt_unifi_outdoor_setup(void)
-+{
-+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
-+ UBNT_UNIFIOD_2ND_PHYMASK));
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-+ ath79_register_eth(0);
-+ ath79_register_eth(1);
-+
-+ ap91_pci_init(ee, NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
-+ ubnt_unifi_outdoor_leds_gpio);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
-+ "Ubiquiti UniFiAP Outdoor",
-+ ubnt_unifi_outdoor_setup);
-+
-+static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
-+ {
-+ .name = "ubnt:white:dome",
-+ .gpio = 12,
-+ }, {
-+ .name = "ubnt:blue:dome",
-+ .gpio = 13,
-+ }
-+};
-+
-+static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
-+ {
-+ .desc = "reset",
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = 17,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
-+ .mode = AR8327_PAD_MAC_RGMII,
-+ .txclk_delay_en = true,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-+};
-+
-+static struct ar8327_platform_data uap_pro_ar8327_data = {
-+ .pad0_cfg = &uap_pro_ar8327_pad0_cfg,
-+ .cpuport_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+};
-+
-+static struct mdio_board_info uap_pro_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &uap_pro_ar8327_data,
-+ },
-+};
-+
-+#define UAP_PRO_MAC0_OFFSET 0x0000
-+#define UAP_PRO_MAC1_OFFSET 0x0006
-+#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000
-+#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000
-+
-+static void __init ubnt_uap_pro_setup(void)
-+{
-+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
-+ ubnt_uap_pro_gpio_leds);
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(uap_pro_gpio_keys),
-+ uap_pro_gpio_keys);
-+
-+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
-+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-+
-+ ath79_register_mdio(0, 0x0);
-+ mdiobus_register_board_info(uap_pro_mdio0_info,
-+ ARRAY_SIZE(uap_pro_mdio0_info));
-+
-+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-+ ath79_init_mac(ath79_eth0_data.mac_addr,
-+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
-+
-+ /* GMAC0 is connected to an AR8327 switch */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+ ath79_register_eth(0);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
-+ ubnt_uap_pro_setup);
-+
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
- Atheros PB44 reference board.
-
- config ATH79_MACH_UBNT_XM
-- bool "Ubiquiti Networks XM (rev 1.0) board"
-+ bool "Ubiquiti Networks XM/UniFi boards"
- select SOC_AR724X
-+ select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -22,6 +22,13 @@ enum ath79_mach_type {
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
-+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
-+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
-+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
-+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
-+ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
-+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
-+ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
- };
-
diff --git a/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch
deleted file mode 100644
index b378888..0000000
--- a/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch
+++ /dev/null
@@ -1,184 +0,0 @@
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -1,5 +1,5 @@
- /*
-- * Qualcomm Atheros AP136 reference board support
-+ * Atheros AP136 reference board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
-@@ -18,23 +18,27 @@
- *
- */
-
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
-+#include "dev-eth.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
--#define AP136_GPIO_LED_STATUS_RED 14
--#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_USB 4
--#define AP136_GPIO_LED_WLAN_2G 13
- #define AP136_GPIO_LED_WLAN_5G 12
-+#define AP136_GPIO_LED_WLAN_2G 13
-+#define AP136_GPIO_LED_STATUS_RED 14
- #define AP136_GPIO_LED_WPS_RED 15
-+#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_WPS_GREEN 20
-
- #define AP136_GPIO_BTN_WPS 16
-@@ -43,8 +47,10 @@
- #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+#define AP136_MAC0_OFFSET 0
-+#define AP136_MAC1_OFFSET 6
-+#define AP136_WMAC_CALDATA_OFFSET 0x1000
-+#define AP136_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led ap136_leds_gpio[] __initdata = {
- {
-@@ -98,63 +104,91 @@ static struct gpio_keys_button ap136_gpi
- },
- };
-
--static struct ath79_spi_controller_data ap136_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg = {
-+ .mode = AR8327_PAD_MAC_RGMII,
-+ .txclk_delay_en = true,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
-
--static struct spi_board_info ap136_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- .controller_data = &ap136_spi0_data,
-- }
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg = {
-+ .mode = AR8327_PAD_MAC_SGMII,
-+ .txclk_delay_en = false,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
- };
-
--static struct ath79_spi_platform_data ap136_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct ar8327_platform_data ap136_ar8327_data = {
-+ .pad0_cfg = &ap136_ar8327_pad0_cfg,
-+ .pad6_cfg = &ap136_ar8327_pad6_cfg,
-+ .cpuport_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ }
- };
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+static struct mdio_board_info ap136_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &ap136_ar8327_data,
-+ },
-+};
-
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+static void __init ap136_gmac_setup(void)
- {
-- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-- dev->dev.platform_data = &ap136_ath9k_data;
-+ void __iomem *base;
-+ u32 t;
-
-- return 0;
--}
-+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
--static void __init ap136_pci_init(u8 *eeprom)
--{
-- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-- sizeof(ap136_ath9k_data.eeprom_data));
-+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-+
-+ t &= ~(QCA955X_ETH_CFG_RGMII_GMAC0 | QCA955X_ETH_CFG_SGMII_GMAC0);
-+ t |= QCA955X_ETH_CFG_RGMII_GMAC0;
-
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
-+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-+
-+ iounmap(base);
- }
--#else
--static inline void ap136_pci_init(void) {}
--#endif /* CONFIG_PCI */
-
- static void __init ap136_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-+ ath79_register_m25p80(NULL);
-+
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
- ap136_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap136_gpio_keys),
- ap136_gpio_keys);
-- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-- ARRAY_SIZE(ap136_spi_info));
-+
- ath79_register_usb();
-- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
-+
-+ ap136_gmac_setup();
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(ap136_mdio0_info,
-+ ARRAY_SIZE(ap136_mdio0_info));
-+
-+ /* GMAC0 is connected to an AR8327 switch */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-+
-+ ath79_register_eth(0);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
diff --git a/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch
deleted file mode 100644
index eba0cbd..0000000
--- a/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch
+++ /dev/null
@@ -1,811 +0,0 @@
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -16,20 +16,104 @@
-
- enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
-+ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
-+ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
-+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
-+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
-+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
-+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
- ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
- ATH79_MACH_AP136, /* Atheros AP136 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
-+ ATH79_MACH_AP83, /* Atheros AP83 */
-+ ATH79_MACH_AP96, /* Atheros AP96 */
-+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
-+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
-+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
-+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
-+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
-+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
-+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
-+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
-+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
-+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
-+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
-+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
-+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
-+ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
-+ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
-+ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
-+ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
-+ ATH79_MACH_OM2P, /* OpenMesh OM2P */
-+ ATH79_MACH_PB42, /* Atheros PB42 */
-+ ATH79_MACH_PB92, /* Atheros PB92 */
-+ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
-+ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
-+ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
-+ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
-+ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
-+ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
-+ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
-+ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
-+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
-+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
-+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
-+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
-+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
-+ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
-+ ATH79_MACH_RW2458N, /* Redwave RW2458N */
-+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
-+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
-+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
-+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
-+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
-+ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */
-+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
-+ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
-+ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
-+ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
-+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
-+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
-+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
-+ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
-+ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
-+ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
-+ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/
-+ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
-+ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */
-+ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */
-+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
- ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
- ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
-+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
-+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
- ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
- ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
-+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
-+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
- ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
- ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
- ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
-+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
-+ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
-+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
-+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
-+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
-+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
-+ ATH79_MACH_WP543, /* Compex WP543 */
-+ ATH79_MACH_WPE72, /* Compex WPE72 */
-+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
-+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
-+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
-+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
-+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
-+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
-+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
-+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
- };
-
- #endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -2,6 +2,61 @@ if ATH79
-
- menu "Atheros AR71XX/AR724X/AR913X machine selection"
-
-+config ATH79_MACH_ALFA_AP96
-+ bool "ALFA Network AP96 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_SPI
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_HORNET_UB
-+ bool "ALFA Network Hornet-UB board support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_ALFA_NX
-+ bool "ALFA Network N2/N5 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_ALL0258N
-+ bool "Allnet ALL0258N support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_ALL0315N
-+ bool "Allnet ALL0315N support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_AP113
-+ bool "Atheros AP113 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_PB9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_ETH
-+
- config ATH79_MACH_AP121
- bool "Atheros AP121 reference board"
- select SOC_AR933X
-@@ -40,6 +95,24 @@ config ATH79_MACH_AP81
- Say 'Y' here if you want your kernel to support the
- Atheros AP81 reference board.
-
-+config ATH79_MACH_AP83
-+ bool "Atheros AP83 board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_AP96
-+ bool "Atheros AP96 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
- config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
-@@ -55,6 +128,13 @@ config ATH79_MACH_DB120
- Say 'Y' here if you want your kernel to support the
- Atheros DB120 reference board.
-
-+config ATH79_MACH_PB42
-+ bool "Atheros PB42 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_M25P80
-+
- config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
-@@ -67,6 +147,456 @@ config ATH79_MACH_PB44
- Say 'Y' here if you want your kernel to support the
- Atheros PB44 reference board.
-
-+config ATH79_MACH_PB92
-+ bool "Atheros PB92 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_PB9X_PCI if PCI
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_AW_NR580
-+ bool "AzureWave AW-NR580 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WHR_HP_G300N
-+ bool "Buffalo WHR-HP-G300N board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WLAE_AG300N
-+ bool "Buffalo WLAE-AG300N board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WZR_HP_AG300H
-+ bool "Buffalo WZR-HP-AG300H board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WZR_HP_G300NH
-+ bool "Buffalo WZR-HP-G300NH board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ select RTL8366_SMI
-+
-+config ATH79_MACH_WZR_HP_G300NH2
-+ bool "Buffalo WZR-HP-G300NH2 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WZR_HP_G450H
-+ bool "Buffalo WZR-HP-G450H board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WP543
-+ bool "Compex WP543/WPJ543 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select MYLOADER
-+
-+config ATH79_MACH_WPE72
-+ bool "Compex WPE72/WPE72NX board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select MYLOADER
-+
-+config ATH79_MACH_DIR_600_A1
-+ bool "D-Link DIR-600 A1/DIR-615 E4 support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_615_C1
-+ bool "D-Link DIR-615 rev. C1 support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_825_B1
-+ bool "D-Link DIR-825 rev. B1 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_EW_DORIN
-+ bool "embedded wireless Dorin Platform support"
-+ select SOC_AR933X
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_WMAC
-+ select ATH79_DEV_ETH
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Dorin Platform from www.80211.de .
-+
-+config ATH79_MACH_JA76PF
-+ bool "jjPlus JA76PF board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_JWAP003
-+ bool "jjPlus JWAP003 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WRT160NL
-+ bool "Linksys WRT160NL board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_WRT400N
-+ bool "Linksys WRT400N board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_RB4XX
-+ bool "MikroTik RouterBOARD 4xx series support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_RB750
-+ bool "MikroTik RouterBOARD 750 support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_USB
-+ select ATH79_ROUTERBOOT
-+ select RLE_DECOMPRESS
-+
-+config ATH79_MACH_RB2011
-+ bool "MikroTik RouterBOARD 2011 support"
-+ select SOC_AR934x
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_WMAC
-+ select ATH79_ROUTERBOOT
-+
-+config ATH79_MACH_WNDR3700
-+ bool "NETGEAR WNDR3700 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WNR2000
-+ bool "NETGEAR WNR2000 board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_OM2P
-+ bool "OpenMesh OM2P board support"
-+ select SOC_AR724X
-+ select SOC_AR933X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MZK_W04NU
-+ bool "Planex MZK-W04NU board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MZK_W300NH
-+ bool "Planex MZK-W300NH board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_RW2458N
-+ bool "Redwave RW2458N board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_EAP7660D
-+ bool "Senao EAP7660D support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_MR11U
-+ bool "TP-LINK TL-MR11U/TL-MR3040 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_MR3020
-+ bool "TP-LINK TL-MR3020 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_MR3X20
-+ bool "TP-LINK TL-MR3220/3420 support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_TL_WA901ND
-+ bool "TP-LINK TL-WA901ND support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WA901ND_V2
-+ bool "TP-LINK TL-WA901ND v2 support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WDR4300
-+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR703N
-+ bool "TP-LINK TL-WR703N support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR741ND
-+ bool "TP-LINK TL-WR741ND support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WR741ND_V4
-+ bool "TP-LINK TL-WR741ND v4 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR841N_V1
-+ bool "TP-LINK TL-WR841N v1 support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_DSA
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WR841N_V8
-+ bool "TP-LINK TL-WR841N/ND v8 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR941ND
-+ bool "TP-LINK TL-WR941ND support"
-+ select SOC_AR913X
-+ select ATH79_DEV_DSA
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR1041N_V2
-+ bool "TP-LINK TL-WR1041N v2 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR1043ND
-+ bool "TP-LINK TL-WR1043ND support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR2543N
-+ bool "TP-LINK TL-WR2543N/ND support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_TEW_632BRP
-+ bool "TRENDnet TEW-632BRP support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_TEW_673GRU
-+ bool "TRENDnet TEW-673GRU support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_TEW_712BR
-+ bool "TRENDnet TEW-712BR support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_UBNT
-+ bool "Ubiquiti AR71xx based boards support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
- config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM/UniFi boards"
- select SOC_AR724X
-@@ -82,6 +612,24 @@ config ATH79_MACH_UBNT_XM
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
-
-+config ATH79_MACH_ZCN_1523H
-+ bool "Zcomax ZCN-1523H support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_NBG460N
-+ bool "Zyxel NBG460N/550N/550NH board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- endmenu
-
- config SOC_AR71XX
-@@ -117,10 +665,6 @@ config SOC_QCA955X
- select PCI_AR724X if PCI
- def_bool n
-
--config ATH79_DEV_M25P80
-- select ATH79_DEV_SPI
-- def_bool n
--
- config ATH79_DEV_AP9X_PCI
- select ATH79_PCI_ATH9K_FIXUP
- def_bool n
-@@ -131,7 +675,14 @@ config ATH79_DEV_DSA
- config ATH79_DEV_ETH
- def_bool n
-
--config PCI_AR724X
-+config ATH79_DEV_M25P80
-+ select ATH79_DEV_SPI
-+ def_bool n
-+
-+config ATH79_DEV_DSA
-+ def_bool n
-+
-+config ATH79_DEV_ETH
- def_bool n
-
- config ATH79_DEV_GPIO_BUTTONS
-@@ -163,4 +714,7 @@ config ATH79_PCI_ATH9K_FIXUP
- config ATH79_ROUTERBOOT
- def_bool n
-
-+config PCI_AR724X
-+ def_bool n
-+
- endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,68 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
- #
- # Machines
- #
-+obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
-+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
-+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
-+obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
-+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
- obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
- obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
- obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
-+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
-+obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
-+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
- obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
-+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
-+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
-+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
-+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
-+obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
-+obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
-+obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
-+obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
-+obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
-+obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
-+obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
- obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
-+obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
-+obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
-+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
-+obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
-+obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
-+obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
-+obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
-+obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
-+obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
- obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
-+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
-+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
-+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
-+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
-+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
-+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
-+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
-+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
-+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
-+
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -180,6 +180,10 @@ void __init prom_init(void)
- ath79_prom_append_cmdline("board", env);
- }
- }
-+
-+ if (strstr(arcs_cmdline, "board=750Gr3") ||
-+ strstr(arcs_cmdline, "board=2011L"))
-+ ath79_prom_append_cmdline("console", "ttyS0,115200");
- }
-
- void __init prom_free_prom_memory(void)
diff --git a/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-support.patch b/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-support.patch
deleted file mode 100644
index 39cef42..0000000
--- a/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-support.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -403,6 +403,16 @@ config ATH79_MACH_RW2458N
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-+config ATH79_MACH_CAP4200AG
-+ bool "Senao CAP4200AG support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_EAP7660D
- bool "Senao EAP7660D support"
- select SOC_AR71XX
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -29,6 +29,7 @@ enum ath79_mach_type {
- ATH79_MACH_AP83, /* Atheros AP83 */
- ATH79_MACH_AP96, /* Atheros AP96 */
- ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
-+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
- ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_ATH79_MACH_AP81) += mach-a
- obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
- obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
- obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
-+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
- obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
- obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
- obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
diff --git a/target/linux/ar71xx/patches-3.3/612-MIPS-ath79-TL-WA7510N-v1-support.patch b/target/linux/ar71xx/patches-3.3/612-MIPS-ath79-TL-WA7510N-v1-support.patch
deleted file mode 100644
index 6bd58b0..0000000
--- a/target/linux/ar71xx/patches-3.3/612-MIPS-ath79-TL-WA7510N-v1-support.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -74,6 +74,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */
- ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
- ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
-+ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
- ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
- ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
- ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -452,7 +452,7 @@ config ATH79_MACH_TL_MR3X20
- select ATH79_DEV_USB
-
- config ATH79_MACH_TL_WA901ND
-- bool "TP-LINK TL-WA901ND support"
-+ bool "TP-LINK TL-WA901ND/TL-WA7510N support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
diff --git a/target/linux/ar71xx/patches-3.3/614-MIPS-ath79-MR600-support.patch b/target/linux/ar71xx/patches-3.3/614-MIPS-ath79-MR600-support.patch
deleted file mode 100644
index f56fd74..0000000
--- a/target/linux/ar71xx/patches-3.3/614-MIPS-ath79-MR600-support.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -374,6 +374,16 @@ config ATH79_MACH_OM2P
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_MR600
-+ bool "OpenMesh MR600 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_MZK_W04NU
- bool "Planex MZK-W04NU board support"
- select SOC_AR913X
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -43,6 +43,7 @@ enum ath79_mach_type {
- ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
- ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
- ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
-+ ATH79_MACH_MR600, /* OpenMesh MR600 */
- ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
- ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
- ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -59,6 +59,7 @@ obj-$(CONFIG_ATH79_MACH_EAP7660D) += mac
- obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
- obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
- obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
-+obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
- obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
- obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
- obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
diff --git a/target/linux/ar71xx/patches-3.3/615-MIPS-ath79-RB435G-support.patch b/target/linux/ar71xx/patches-3.3/615-MIPS-ath79-RB435G-support.patch
deleted file mode 100644
index 5921417..0000000
--- a/target/linux/ar71xx/patches-3.3/615-MIPS-ath79-RB435G-support.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -56,6 +56,7 @@ enum ath79_mach_type {
- ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
- ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
- ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
-+ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */
- ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
- ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
- ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
diff --git a/target/linux/ar71xx/patches-3.3/616-MIPS-ath79-WNDR4300-support.patch b/target/linux/ar71xx/patches-3.3/616-MIPS-ath79-WNDR4300-support.patch
deleted file mode 100644
index 055708b..0000000
--- a/target/linux/ar71xx/patches-3.3/616-MIPS-ath79-WNDR4300-support.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -354,6 +354,17 @@ config ATH79_MACH_WNDR3700
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-+config ATH79_MACH_WNDR4300
-+ bool "NETGEAR WNDR4300 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_WNR2000
- bool "NETGEAR WNR2000 board support"
- select SOC_AR913X
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -107,6 +107,7 @@ enum ath79_mach_type {
- ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
- ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
- ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
-+ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
- ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
- ATH79_MACH_WP543, /* Compex WP543 */
- ATH79_MACH_WPE72, /* Compex WPE72 */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -94,6 +94,7 @@ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach
- obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
- obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
- obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
-+obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
- obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
- obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
- obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
diff --git a/target/linux/ar71xx/patches-3.3/630-MIPS-ath79-enable-dsp.patch b/target/linux/ar71xx/patches-3.3/630-MIPS-ath79-enable-dsp.patch
deleted file mode 100644
index 3071ab8..0000000
--- a/target/linux/ar71xx/patches-3.3/630-MIPS-ath79-enable-dsp.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-@@ -42,7 +42,6 @@
- #define cpu_has_mips64r1 0
- #define cpu_has_mips64r2 0
-
--#define cpu_has_dsp 0
- #define cpu_has_mipsmt 0
-
- #define cpu_has_64bits 0
diff --git a/target/linux/ar71xx/patches-3.3/650-MIPS-ath79-fix-ar933x-reset.patch b/target/linux/ar71xx/patches-3.3/650-MIPS-ath79-fix-ar933x-reset.patch
deleted file mode 100644
index a81d6ea..0000000
--- a/target/linux/ar71xx/patches-3.3/650-MIPS-ath79-fix-ar933x-reset.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -67,10 +67,27 @@ static void __init ar913x_wmac_setup(voi
-
- static int ar933x_wmac_reset(void)
- {
-+ int retries = 20;
-+
- ath79_device_reset_set(AR933X_RESET_WMAC);
- ath79_device_reset_clear(AR933X_RESET_WMAC);
-
-- return 0;
-+ while (1) {
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
-+ return 0;
-+
-+ if (retries-- == 0)
-+ break;
-+
-+ udelay(10000);
-+ retries++;
-+ }
-+
-+ pr_err("ar933x: WMAC reset timed out");
-+ return -ETIMEDOUT;
- }
-
- static int ar933x_r1_get_wmac_revision(void)
diff --git a/target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch
deleted file mode 100644
index 39584aa..0000000
--- a/target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
-
-- /* check the turnaround bit: the PHY should be driving it to zero */
-- if (mdiobb_get_bit(ctrl) != 0) {
-- /* PHY didn't drive TA low -- flush any bits it
-- * may be trying to send.
-- */
-- for (i = 0; i < 32; i++)
-- mdiobb_get_bit(ctrl);
--
-- return 0xffff;
-- }
-+ mdiobb_get_bit(ctrl);
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
diff --git a/target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch
deleted file mode 100644
index 921cf19..0000000
--- a/target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -12,6 +12,7 @@
- #define _ASM_CHECKSUM_H
-
- #include <linux/in6.h>
-+#include <linux/unaligned/packed_struct.h>
-
- #include <asm/uaccess.h>
-
-@@ -104,26 +105,30 @@ static inline __sum16 ip_fast_csum(const
- const unsigned int *stop = word + ihl;
- unsigned int csum;
- int carry;
-+ unsigned int w;
-
-- csum = word[0];
-- csum += word[1];
-- carry = (csum < word[1]);
-+ csum = __get_unaligned_cpu32(word++);
-+
-+ w = __get_unaligned_cpu32(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[2];
-- carry = (csum < word[2]);
-+ w = __get_unaligned_cpu32(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[3];
-- carry = (csum < word[3]);
-+ w = __get_unaligned_cpu32(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- word += 4;
- do {
-- csum += *word;
-- carry = (csum < *word);
-+ w = __get_unaligned_cpu32(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-- word++;
- } while (word != stop);
-
- return csum_fold(csum);
---- a/include/linux/ip.h
-+++ b/include/linux/ip.h
-@@ -102,7 +102,7 @@ struct iphdr {
- __be32 saddr;
- __be32 daddr;
- /*The options start here. */
--};
-+} __packed;
-
- #ifdef __KERNEL__
- #include <linux/skbuff.h>
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -126,7 +126,7 @@ struct ipv6hdr {
-
- struct in6_addr saddr;
- struct in6_addr daddr;
--};
-+} __packed;
-
- #ifdef __KERNEL__
- /*
---- a/include/linux/tcp.h
-+++ b/include/linux/tcp.h
-@@ -54,7 +54,7 @@ struct tcphdr {
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
--};
-+} __packed;
-
- /*
- * The union cast uses a gcc extension to avoid aliasing problems
---- a/include/linux/udp.h
-+++ b/include/linux/udp.h
-@@ -24,7 +24,7 @@ struct udphdr {
- __be16 dest;
- __be16 len;
- __sum16 check;
--};
-+} __packed;
-
- /* UDP socket options */
- #define UDP_CORK 1 /* Never send partially complete segments */
---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-@@ -14,6 +14,7 @@
- #include <linux/skbuff.h>
- #include <linux/icmp.h>
- #include <linux/sysctl.h>
-+#include <linux/unaligned/packed_struct.h>
- #include <net/route.h>
- #include <net/ip.h>
-
-@@ -44,8 +45,8 @@ static bool ipv4_pkt_to_tuple(const stru
- if (ap == NULL)
- return false;
-
-- tuple->src.u3.ip = ap[0];
-- tuple->dst.u3.ip = ap[1];
-+ tuple->src.u3.ip = __get_unaligned_cpu32(ap++);
-+ tuple->dst.u3.ip = __get_unaligned_cpu32(ap);
-
- return true;
- }
diff --git a/target/linux/ar71xx/patches-3.3/a01-ag71xx-build_skb-compat.patch b/target/linux/ar71xx/patches-3.3/a01-ag71xx-build_skb-compat.patch
deleted file mode 100644
index a75f8ef..0000000
--- a/target/linux/ar71xx/patches-3.3/a01-ag71xx-build_skb-compat.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-reverted:
---- a/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
-+++ b/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
-@@ -891,7 +891,7 @@ static int ag71xx_rx_packets(struct ag71
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pktlen;
-
-- skb = build_skb(ring->buf[i].rx_buf, 0);
-+ skb = build_skb(ring->buf[i].rx_buf);
- if (!skb) {
- kfree(ring->buf[i].rx_buf);
- goto next;
diff --git a/target/linux/ar71xx/patches-3.3/a02-ar934x_nfc-add-NO_AUTOINCR-flag.patch b/target/linux/ar71xx/patches-3.3/a02-ar934x_nfc-add-NO_AUTOINCR-flag.patch
deleted file mode 100644
index 0a7a221..0000000
--- a/target/linux/ar71xx/patches-3.3/a02-ar934x_nfc-add-NO_AUTOINCR-flag.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-reverted:
---- a/drivers/mtd/nand/ar934x_nfc.c
-+++ b/drivers/mtd/nand/ar934x_nfc.c
-@@ -1064,6 +1064,7 @@ ar934x_nfc_probe(struct platform_device
- else
- mtd->name = dev_name(&pdev->dev);
-
-+ nand->options = NAND_NO_AUTOINCR;
- nand->chip_delay = 25;
- nand->ecc.mode = NAND_ECC_SOFT;
-
diff --git a/target/linux/ar71xx/patches-3.3/a03-rb4xx_nand-add-NO_AUTOINCR-flag.patch b/target/linux/ar71xx/patches-3.3/a03-rb4xx_nand-add-NO_AUTOINCR-flag.patch
deleted file mode 100644
index 864340e..0000000
--- a/target/linux/ar71xx/patches-3.3/a03-rb4xx_nand-add-NO_AUTOINCR-flag.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-reverted:
---- a/drivers/mtd/nand/rb4xx_nand.c
-+++ b/drivers/mtd/nand/rb4xx_nand.c
-@@ -218,6 +218,7 @@ static int __devinit rb4xx_nand_probe(st
-
- info->chip.chip_delay = 25;
- info->chip.ecc.mode = NAND_ECC_SOFT;
-+ info->chip.options |= NAND_NO_AUTOINCR;
-
- platform_set_drvdata(pdev, info);
-
diff --git a/target/linux/ar71xx/patches-3.3/a04-rb750_nand-add-NO_AUTOINCR-flag.patch b/target/linux/ar71xx/patches-3.3/a04-rb750_nand-add-NO_AUTOINCR-flag.patch
deleted file mode 100644
index 4082df2..0000000
--- a/target/linux/ar71xx/patches-3.3/a04-rb750_nand-add-NO_AUTOINCR-flag.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-reverted:
---- a/drivers/mtd/nand/rb750_nand.c
-+++ b/drivers/mtd/nand/rb750_nand.c
-@@ -277,6 +277,7 @@ static int __devinit rb750_nand_probe(st
-
- info->chip.chip_delay = 25;
- info->chip.ecc.mode = NAND_ECC_SOFT;
-+ info->chip.options |= NAND_NO_AUTOINCR;
-
- info->pdata = pdata;
-
diff --git a/target/linux/ar71xx/patches-3.3/a05-ar934x_nfc-add-buffer-verification.patch b/target/linux/ar71xx/patches-3.3/a05-ar934x_nfc-add-buffer-verification.patch
deleted file mode 100644
index 69027ad..0000000
--- a/target/linux/ar71xx/patches-3.3/a05-ar934x_nfc-add-buffer-verification.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/mtd/nand/ar934x_nfc.c
-+++ b/drivers/mtd/nand/ar934x_nfc.c
-@@ -786,6 +786,18 @@ ar934x_nfc_read_buf(struct mtd_info *mtd
- nfc->buf_index = buf_index;
- }
-
-+static int
-+ar934x_nfc_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i;
-+
-+ for (i = 0; i < len; i++)
-+ if (buf[i] != ar934x_nfc_read_byte(mtd))
-+ return -EFAULT;
-+
-+ return 0;
-+}
-+
- static void
- ar934x_nfc_hw_init(struct ar934x_nfc *nfc)
- {
-@@ -1073,6 +1085,7 @@ ar934x_nfc_probe(struct platform_device
- nand->read_byte = ar934x_nfc_read_byte;
- nand->write_buf = ar934x_nfc_write_buf;
- nand->read_buf = ar934x_nfc_read_buf;
-+ nand->verify_buf = ar934x_nfc_verify_buf;
- nand->select_chip = ar934x_nfc_select_chip;
-
- ret = ar934x_nfc_alloc_buf(nfc, AR934X_NFC_ID_BUF_SIZE);
diff --git a/target/linux/ar71xx/patches-3.3/a06-rb750_nand-add-buffer-verification.patch b/target/linux/ar71xx/patches-3.3/a06-rb750_nand-add-buffer-verification.patch
deleted file mode 100644
index fb27194..0000000
--- a/target/linux/ar71xx/patches-3.3/a06-rb750_nand-add-buffer-verification.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/drivers/mtd/nand/rb750_nand.c
-+++ b/drivers/mtd/nand/rb750_nand.c
-@@ -110,7 +110,8 @@ static void rb750_nand_write(const u8 *b
- __raw_readl(base + AR71XX_GPIO_REG_OE);
- }
-
--static void rb750_nand_read(u8 *read_buf, unsigned len)
-+static int rb750_nand_read_verify(u8 *read_buf, unsigned len,
-+ const u8 *verify_buf)
- {
- void __iomem *base = ath79_gpio_base;
- unsigned i;
-@@ -130,8 +131,13 @@ static void rb750_nand_read(u8 *read_buf
- /* deactivate RE line */
- __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET);
-
-- read_buf[i] = data;
-+ if (read_buf)
-+ read_buf[i] = data;
-+ else if (verify_buf && verify_buf[i] != data)
-+ return -EFAULT;
- }
-+
-+ return 0;
- }
-
- static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
-@@ -206,13 +212,13 @@ static void rb750_nand_cmd_ctrl(struct m
- static u8 rb750_nand_read_byte(struct mtd_info *mtd)
- {
- u8 data = 0;
-- rb750_nand_read(&data, 1);
-+ rb750_nand_read_verify(&data, 1, NULL);
- return data;
- }
-
- static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
- {
-- rb750_nand_read(buf, len);
-+ rb750_nand_read_verify(buf, len, NULL);
- }
-
- static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
-@@ -220,6 +226,11 @@ static void rb750_nand_write_buf(struct
- rb750_nand_write(buf, len);
- }
-
-+static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+ return rb750_nand_read_verify(NULL, len, buf);
-+}
-+
- static void __init rb750_nand_gpio_init(struct rb750_nand_info *info)
- {
- void __iomem *base = ath79_gpio_base;
-@@ -274,6 +285,7 @@ static int __devinit rb750_nand_probe(st
- info->chip.read_byte = rb750_nand_read_byte;
- info->chip.write_buf = rb750_nand_write_buf;
- info->chip.read_buf = rb750_nand_read_buf;
-+ info->chip.verify_buf = rb750_nand_verify_buf;
-
- info->chip.chip_delay = 25;
- info->chip.ecc.mode = NAND_ECC_SOFT;