summaryrefslogtreecommitdiff
path: root/target/linux/ar7
diff options
context:
space:
mode:
authorEugene Konev <ejka@imfi.kspu.ru>2007-10-10 06:23:39 +0000
committerEugene Konev <ejka@imfi.kspu.ru>2007-10-10 06:23:39 +0000
commitc18f441ebea8e81d3171b5a4ad687ece5c82173e (patch)
tree8e9e950080f933d9d41e765f02cc624277815cd7 /target/linux/ar7
parent72f5fa6b928901b03d3e07c5e3c82f024244019f (diff)
downloadmtk-20170518-c18f441ebea8e81d3171b5a4ad687ece5c82173e.zip
mtk-20170518-c18f441ebea8e81d3171b5a4ad687ece5c82173e.tar.gz
mtk-20170518-c18f441ebea8e81d3171b5a4ad687ece5c82173e.tar.bz2
switch ar7 to 2.6.23
SVN-Revision: 9235
Diffstat (limited to 'target/linux/ar7')
-rw-r--r--target/linux/ar7/Makefile2
-rw-r--r--target/linux/ar7/config-2.6.22187
-rw-r--r--target/linux/ar7/patches-2.6.22/100-board_support.patch90
-rw-r--r--target/linux/ar7/patches-2.6.22/110-flash.patch40
-rw-r--r--target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch30
-rw-r--r--target/linux/ar7/patches-2.6.22/130-leds.patch27
-rw-r--r--target/linux/ar7/patches-2.6.22/130-vlynq.patch20
-rw-r--r--target/linux/ar7/patches-2.6.22/140-watchdog.patch27
-rw-r--r--target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch30
-rw-r--r--target/linux/ar7/patches-2.6.22/210-phy_fixed.patch93
-rw-r--r--target/linux/ar7/patches-2.6.22/500-serial_kludge.patch54
-rw-r--r--target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch14
12 files changed, 8 insertions, 606 deletions
diff --git a/target/linux/ar7/Makefile b/target/linux/ar7/Makefile
index a355356..02daa37 100644
--- a/target/linux/ar7/Makefile
+++ b/target/linux/ar7/Makefile
@@ -11,7 +11,7 @@ BOARD:=ar7
BOARDNAME:=TI AR7
FEATURES:=squashfs jffs2 atm
-LINUX_VERSION:=2.6.22.4
+LINUX_VERSION:=2.6.23
include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/ar7/config-2.6.22 b/target/linux/ar7/config-2.6.22
deleted file mode 100644
index 07c6afb..0000000
--- a/target/linux/ar7/config-2.6.22
+++ /dev/null
@@ -1,187 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_AR7=y
-CONFIG_AR7_GPIO=y
-CONFIG_AR7_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ATM_DRIVERS=y
-CONFIG_BASE_SMALL=0
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BOOT_ELF32=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_BT is not set
-CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2,"
-CONFIG_CPMAC=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_MII_100_FDX=y
-# CONFIG_FIXED_MII_10_FDX is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_GEN_RTC is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HW_RANDOM=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_LEDS_AR7=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_EV64120 is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_AR7_PARTS=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_START=0x10000000
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_NETDEV_1000 is not set
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_GRE=m
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PHYLIB=y
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNPACPI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_RTC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_KGDB=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VLYNQ=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ar7/patches-2.6.22/100-board_support.patch b/target/linux/ar7/patches-2.6.22/100-board_support.patch
deleted file mode 100644
index 59fafa5..0000000
--- a/target/linux/ar7/patches-2.6.22/100-board_support.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig
---- linux-2.6.22/arch/mips/Kconfig 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.22.new/arch/mips/Kconfig 2007-07-11 02:34:51.000000000 +0200
-@@ -15,6 +15,21 @@
- prompt "System type"
- default SGI_IP22
-
-+config AR7
-+ bool "Texas Instruments AR7"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SWAP_IO_SPACE
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_EARLY_PRINTK
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_KGDB
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select GENERIC_GPIO
-+ select GENERIC_HARDIRQS_NO__DO_IRQ
-+
- config MACH_ALCHEMY
- bool "Alchemy processor based machines"
-
-diff -urN linux-2.6.22/arch/mips/kernel/traps.c linux-2.6.22.new/arch/mips/kernel/traps.c
---- linux-2.6.22/arch/mips/kernel/traps.c 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.22.new/arch/mips/kernel/traps.c 2007-07-11 02:32:39.000000000 +0200
-@@ -1074,11 +1074,23 @@ void *set_except_vector(int n, void *addr)
- unsigned long old_handler = exception_handlers[n];
-
- exception_handlers[n] = handler;
-- if (n == 0 && cpu_has_divec) {
-- *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
-- (0x03ffffff & (handler >> 2));
-- flush_icache_range(ebase + 0x200, ebase + 0x204);
-- }
-+ if (n == 0 && cpu_has_divec)
-+ if ((handler ^ (ebase + 4)) & 0xfc000000) {
-+ /* lui k0, 0x0000 */
-+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
-+ /* ori k0, 0x0000 */
-+ *(u32 *)(ebase + 0x204) =
-+ 0x375a0000 | (handler & 0xffff);
-+ /* jr k0 */
-+ *(u32 *)(ebase + 0x208) = 0x03400008;
-+ /* nop */
-+ *(u32 *)(ebase + 0x20C) = 0x00000000;
-+ flush_icache_range(ebase + 0x200, ebase + 0x210);
-+ } else {
-+ *(volatile u32 *)(ebase + 0x200) =
-+ 0x08000000 | (0x03ffffff & (handler >> 2));
-+ flush_icache_range(ebase + 0x200, ebase + 0x204);
-+ }
- return (void *)old_handler;
- }
-
-diff -urN linux-2.6.22/arch/mips/Makefile linux-2.6.22.new/arch/mips/Makefile
---- linux-2.6.22/arch/mips/Makefile 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.22.new/arch/mips/Makefile 2007-07-11 02:32:39.000000000 +0200
-@@ -158,6 +158,13 @@
- #
-
- #
-+# Texas Instruments AR7
-+#
-+core-$(CONFIG_AR7) += arch/mips/ar7/
-+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7
-+load-$(CONFIG_AR7) += 0xffffffff94100000
-+
-+#
- # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
- #
- core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
-diff -urN linux-2.6.22.4/include/asm-mips/page.h linux-2.6.22.4.new/include/asm-mips/page.h
---- linux-2.6.22.4/include/asm-mips/page.h 2007-08-21 12:33:06.000000000 +0800
-+++ linux-2.6.22.4.new/include/asm-mips/page.h 2007-09-13 15:13:00.000000000 +0800
-@@ -187,8 +187,10 @@
- #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
--#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
--#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
-+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
-+ PHYS_OFFSET)
-+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
-+ PHYS_OFFSET)
-
- #include <asm-generic/memory_model.h>
- #include <asm-generic/page.h>
diff --git a/target/linux/ar7/patches-2.6.22/110-flash.patch b/target/linux/ar7/patches-2.6.22/110-flash.patch
deleted file mode 100644
index 6edc353..0000000
--- a/target/linux/ar7/patches-2.6.22/110-flash.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig
---- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700
-+++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700
-@@ -152,6 +152,12 @@
- for your particular device. It won't happen automatically. The
- 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
-
-+config MTD_AR7_PARTS
-+ tristate "TI AR7 partitioning support"
-+ depends on MTD_PARTITIONS
-+ ---help---
-+ TI AR7 partitioning support
-+
- comment "User Modules And Translation Layers"
- depends on MTD
-
-diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile
---- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700
-+++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
-+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR) += mtdchar.o
-diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c
---- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700
-+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700
-@@ -74,7 +74,8 @@
-
- static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
- #ifdef CONFIG_MTD_PARTITIONS
--static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-+static const char *part_probe_types[] = {"cmdlinepart", "RedBoot",
-+ "ar7part", NULL };
- #endif
-
- static int physmap_flash_probe(struct platform_device *dev)
diff --git a/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch
deleted file mode 100644
index 41a8b8e..0000000
--- a/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig
---- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100
-@@ -920,6 +920,15 @@
- To compile this driver as a module, choose M here: the
- module will be called mwave.
-
-+config AR7_GPIO
-+ tristate "TI AR7 GPIO Support"
-+ depends on AR7
-+ help
-+ Give userspace access to the GPIO pins on the Texas Instruments AR7
-+ processors.
-+
-+ If compiled as a module, it will be called ar7_gpio.
-+
- config SCx200_GPIO
- tristate "NatSemi SCx200 GPIO Support"
- depends on SCx200
-diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile
---- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100
-@@ -83,6 +83,7 @@
- obj-$(CONFIG_PPDEV) += ppdev.o
- obj-$(CONFIG_NWBUTTON) += nwbutton.o
- obj-$(CONFIG_NWFLASH) += nwflash.o
-+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
- obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
- obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
- obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
diff --git a/target/linux/ar7/patches-2.6.22/130-leds.patch b/target/linux/ar7/patches-2.6.22/130-leds.patch
deleted file mode 100644
index 261b712..0000000
--- a/target/linux/ar7/patches-2.6.22/130-leds.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig
---- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100
-@@ -19,6 +19,12 @@
-
- comment "LED drivers"
-
-+config LEDS_AR7
-+ tristate "LED Support for the TI AR7"
-+ depends LEDS_CLASS && AR7
-+ help
-+ This option enables support for the LEDs on TI AR7.
-+
- config LEDS_CORGI
- tristate "LED Support for the Sharp SL-C7x0 series"
- depends LEDS_CLASS && PXA_SHARP_C7xx
-diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile
---- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100
-@@ -5,6 +5,7 @@
- obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
-
- # LED Platform Drivers
-+obj-$(CONFIG_LEDS_AR7) += leds-ar7.o
- obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
- obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
- obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
diff --git a/target/linux/ar7/patches-2.6.22/130-vlynq.patch b/target/linux/ar7/patches-2.6.22/130-vlynq.patch
deleted file mode 100644
index 2e8dea3..0000000
--- a/target/linux/ar7/patches-2.6.22/130-vlynq.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-Index: linux-2.6.22.4/drivers/Kconfig
-===================================================================
---- linux-2.6.22.4.orig/drivers/Kconfig 2007-10-06 01:09:43.000000000 +0800
-+++ linux-2.6.22.4/drivers/Kconfig 2007-10-06 01:12:19.000000000 +0800
-@@ -84,4 +84,6 @@
-
- source "drivers/kvm/Kconfig"
-
-+source "drivers/vlynq/Kconfig"
-+
- endmenu
-Index: linux-2.6.22.4/drivers/Makefile
-===================================================================
---- linux-2.6.22.4.orig/drivers/Makefile 2007-10-06 01:09:43.000000000 +0800
-+++ linux-2.6.22.4/drivers/Makefile 2007-10-06 01:12:37.000000000 +0800
-@@ -81,3 +81,4 @@
- obj-$(CONFIG_DMA_ENGINE) += dma/
- obj-$(CONFIG_HID) += hid/
- obj-$(CONFIG_PPC_PS3) += ps3/
-+obj-$(CONFIG_VLYNQ) += vlynq/
diff --git a/target/linux/ar7/patches-2.6.22/140-watchdog.patch b/target/linux/ar7/patches-2.6.22/140-watchdog.patch
deleted file mode 100644
index 163df40..0000000
--- a/target/linux/ar7/patches-2.6.22/140-watchdog.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig
---- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100
-@@ -544,6 +544,12 @@
-
- # MIPS Architecture
-
-+config AR7_WDT
-+ tristate "TI AR7 Watchdog Timer"
-+ depends on WATCHDOG && AR7
-+ help
-+ Hardware driver for the TI AR7 Watchdog Timer.
-+
- config INDYDOG
- tristate "Indy/I2 Hardware Watchdog"
- depends on WATCHDOG && SGI_IP22
-diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile
---- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100
-@@ -71,6 +71,7 @@
- obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
-
- # MIPS Architecture
-+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
-
- # S390 Architecture
diff --git a/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch b/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch
deleted file mode 100644
index 5a07d35..0000000
--- a/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig
---- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700
-+++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700
-@@ -1777,6 +1777,15 @@
- workstations.
- See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
-
-+config CPMAC
-+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL && AR7
-+ select PHYLIB
-+ select FIXED_PHY
-+ select FIXED_MII_100_FDX
-+ help
-+ TI AR7 CPMAC Ethernet support
-+
- config NET_POCKET
- bool "Pocket and portable adapters"
- depends on NET_ETHERNET && PARPORT
-diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile
---- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700
-+++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700
-@@ -148,6 +148,7 @@
- obj-$(CONFIG_8139TOO) += 8139too.o
- obj-$(CONFIG_ZNET) += znet.o
- obj-$(CONFIG_LAN_SAA9730) += saa9730.o
-+obj-$(CONFIG_CPMAC) += cpmac.o
- obj-$(CONFIG_DEPCA) += depca.o
- obj-$(CONFIG_EWRK3) += ewrk3.o
- obj-$(CONFIG_ATP) += atp.o
diff --git a/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch b/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch
deleted file mode 100644
index c8eceeb..0000000
--- a/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-Index: linux-2.6.21.4/drivers/net/phy/fixed.c
-===================================================================
---- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200
-+++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200
-@@ -187,6 +187,19 @@
- .driver = { .owner = THIS_MODULE,},
- };
-
-+static void fixed_mdio_release (struct device * dev)
-+{
-+ struct phy_device *phydev = container_of(dev, struct phy_device, dev);
-+ struct mii_bus *bus = phydev->bus;
-+ struct fixed_info *fixed = bus->priv;
-+
-+ kfree(phydev);
-+ kfree(bus->dev);
-+ kfree(bus);
-+ kfree(fixed->regs);
-+ kfree(fixed);
-+}
-+
- /*-----------------------------------------------------------------------------
- * This func is used to create all the necessary stuff, bind
- * the fixed phy driver and register all it on the mdio_bus_type.
-@@ -221,6 +234,12 @@
- }
-
- fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
-+ if (NULL == fixed->regs) {
-+ kfree(dev);
-+ kfree(new_bus);
-+ kfree(fixed);
-+ return -ENOMEM;
-+ }
- fixed->regs_num = MII_REGS_NUM;
- fixed->phy_status.speed = speed;
- fixed->phy_status.duplex = duplex;
-@@ -249,8 +268,11 @@
- fixed->phydev = phydev;
-
- if(NULL == phydev) {
-- err = -ENOMEM;
-- goto device_create_fail;
-+ kfree(dev);
-+ kfree(new_bus);
-+ kfree(fixed->regs);
-+ kfree(fixed);
-+ return -ENOMEM;
- }
-
- phydev->irq = PHY_IGNORE_INTERRUPT;
-@@ -262,8 +283,33 @@
- else
- snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
- "fixed@%d:%d", speed, duplex);
-+
- phydev->bus = new_bus;
-
-+#if 1
-+ phydev->dev.driver = &fixed_mdio_driver.driver;
-+ phydev->dev.release = fixed_mdio_release;
-+
-+ err = phydev->dev.driver->probe(&phydev->dev);
-+ if(err < 0) {
-+ printk(KERN_ERR "Phy %s: problems with fixed driver\n",
-+ phydev->dev.bus_id);
-+ kfree(phydev);
-+ kfree(dev);
-+ kfree(new_bus);
-+ kfree(fixed->regs);
-+ kfree(fixed);
-+ return err;
-+ }
-+
-+ err = device_register(&phydev->dev);
-+ if(err) {
-+ printk(KERN_ERR "Phy %s failed to register\n",
-+ phydev->dev.bus_id);
-+ }
-+
-+ return 0;
-+#else
- err = device_register(&phydev->dev);
- if(err) {
- printk(KERN_ERR "Phy %s failed to register\n",
-@@ -306,6 +354,7 @@
- kfree(fixed);
-
- return err;
-+#endif
- }
-
-
diff --git a/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch
deleted file mode 100644
index c8f06a1..0000000
--- a/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-diff -urN linux-2.6.22.orig/drivers/serial/8250.c linux-2.6.22/drivers/serial/8250.c
---- linux-2.6.22.orig/drivers/serial/8250.c 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.22/drivers/serial/8250.c 2007-07-11 03:08:57.000000000 +0200
-@@ -258,6 +258,13 @@
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
-+ [PORT_AR7] = {
-+ .name = "TI-AR7",
-+ .fifo_size = 16,
-+ .tx_loadsz = 16,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
-+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
-+ },
- };
-
- #if defined (CONFIG_SERIAL_8250_AU1X00)
-@@ -2453,7 +2453,11 @@
- {
- struct uart_8250_port *up = (struct uart_8250_port *)port;
-
-+#ifdef CONFIG_AR7
-+ wait_for_xmitr(up, BOTH_EMPTY);
-+#else
- wait_for_xmitr(up, UART_LSR_THRE);
-+#endif
- serial_out(up, UART_TX, ch);
- }
-
-diff -urN linux-2.6.22.orig/include/linux/serial_core.h linux-2.6.22/include/linux/serial_core.h
---- linux-2.6.22.orig/include/linux/serial_core.h 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.22/include/linux/serial_core.h 2007-07-11 03:09:49.000000000 +0200
-@@ -40,6 +40,7 @@
- #define PORT_NS16550A 14
- #define PORT_XSCALE 15
- #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
-+#define PORT_AR7 16
- #define PORT_MAX_8250 16 /* max port ID */
-
- /*
-diff -urN linux-2.6.22.orig/include/linux/serialP.h linux-2.6.22/include/linux/serialP.h
---- linux-2.6.22.orig/include/linux/serialP.h 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.22/include/linux/serialP.h 2007-07-11 03:08:57.000000000 +0200
-@@ -135,6 +135,10 @@
- * the interrupt line _up_ instead of down, so if we register the IRQ
- * while the UART is in that state, we die in an IRQ storm. */
- #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
-+#elif defined(CONFIG_AR7)
-+/* This is how it is set up by bootloader... */
-+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 \
-+ | UART_MCR_RTS | UART_MCR_DTR)
- #else
- #define ALPHA_KLUDGE_MCR 0
- #endif
diff --git a/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch b/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch
index 79fcf45..08f2657 100644
--- a/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch
+++ b/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.23-rc6/drivers/net/Kconfig
+Index: linux-2.6.23/drivers/net/Kconfig
===================================================================
---- linux-2.6.23-rc6.orig/drivers/net/Kconfig 2007-09-21 16:24:02.000000000 +0800
-+++ linux-2.6.23-rc6/drivers/net/Kconfig 2007-09-21 16:24:13.000000000 +0800
+--- linux-2.6.23.orig/drivers/net/Kconfig 2007-10-10 13:52:54.000000000 +0800
++++ linux-2.6.23/drivers/net/Kconfig 2007-10-10 13:53:54.000000000 +0800
@@ -1965,6 +1965,15 @@
To compile this driver as a module, choose M here: the module
will be called sc92031. This is recommended.
@@ -18,11 +18,11 @@ Index: linux-2.6.23-rc6/drivers/net/Kconfig
config NET_POCKET
bool "Pocket and portable adapters"
depends on PARPORT
-Index: linux-2.6.23-rc6/drivers/net/Makefile
+Index: linux-2.6.23/drivers/net/Makefile
===================================================================
---- linux-2.6.23-rc6.orig/drivers/net/Makefile 2007-09-21 16:24:02.000000000 +0800
-+++ linux-2.6.23-rc6/drivers/net/Makefile 2007-09-21 16:24:13.000000000 +0800
-@@ -155,6 +155,7 @@
+--- linux-2.6.23.orig/drivers/net/Makefile 2007-10-10 13:52:54.000000000 +0800
++++ linux-2.6.23/drivers/net/Makefile 2007-10-10 13:53:54.000000000 +0800
+@@ -156,6 +156,7 @@
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_LAN_SAA9730) += saa9730.o