diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2013-07-12 13:46:27 +0000 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2013-07-12 13:46:27 +0000 |
commit | 9e9261a7182c82947f1bbd7f63aa6a93a783e02e (patch) | |
tree | 77b0578b21c88e818fb6fb4507ea7c4325654582 /target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch | |
parent | 92961e09178746996cba8fea04482d69a7e69201 (diff) | |
download | mtk-20170518-9e9261a7182c82947f1bbd7f63aa6a93a783e02e.zip mtk-20170518-9e9261a7182c82947f1bbd7f63aa6a93a783e02e.tar.gz mtk-20170518-9e9261a7182c82947f1bbd7f63aa6a93a783e02e.tar.bz2 |
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37268
Diffstat (limited to 'target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch')
-rw-r--r-- | target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch | 421 |
1 files changed, 421 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch b/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch new file mode 100644 index 0000000..90c1178 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch @@ -0,0 +1,421 @@ +From 403eb25e5ae7a2169d8c1eae9df4162815e7c3ba Mon Sep 17 00:00:00 2001 +From: Stuart Menefy <stuart.menefy at> +Date: Wed, 26 Jun 2013 11:48:38 +0000 +Subject: [PATCH 01/17] clocksource:arm_global_timer: Add ARM global timer + support. + +This is a simple driver for the global timer module found in the Cortex +A9-MP cores from revision r1p0 onwards. This should be able to perform +the functions of the system timer and the local timer in an SMP system. + +The global timer has the following features: + The global timer is a 64-bit incrementing counter with an +auto-incrementing feature. It continues incrementing after sending +interrupts. The global timer is memory mapped in the private memory +region. + The global timer is accessible to all Cortex-A9 processors in the +cluster. Each Cortex-A9 processor has a private 64-bit comparator that +is used to assert a private interrupt when the global timer has reached +the comparator value. All the Cortex-A9 processors in a design use the +banked ID, ID27, for this interrupt. ID27 is sent to the Interrupt +Controller as a Private Peripheral Interrupt. The global timer is +clocked by PERIPHCLK. + +Signed-off-by: Stuart Menefy <stuart.menefy@st.com> +Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> +CC: Arnd Bergmann <arnd@arndb.de> +CC: Rob Herring <robherring2@gmail.com> +CC: Linus Walleij <linus.walleij@linaro.org> +CC: Will Deacon <will.deacon@arm.com> +CC: Thomas Gleixner <tglx@linutronix.de> +--- + .../devicetree/bindings/arm/global_timer.txt | 21 ++ + drivers/clocksource/Kconfig | 13 + + drivers/clocksource/Makefile | 1 + + drivers/clocksource/arm_global_timer.c | 325 ++++++++++++++++++++ + 4 files changed, 360 insertions(+) + create mode 100644 Documentation/devicetree/bindings/arm/global_timer.txt + create mode 100644 drivers/clocksource/arm_global_timer.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/arm/global_timer.txt +@@ -0,0 +1,21 @@ ++ ++* ARM Global Timer ++ Cortex-A9 are often associated with a per-core Global timer. ++ ++** Timer node required properties: ++ ++- compatible : Should be "arm,cortex-a9-global-timer" ++ Driver supports versions r2p0 and above. ++ ++- interrupts : One interrupt to each core ++ ++- reg : Specify the base address and the size of the GT timer ++ register window. ++ ++Example: ++ ++ timer@2c000600 { ++ compatible = "arm,cortex-a9-global-timer"; ++ reg = <0x2c000600 0x20>; ++ interrupts = <1 13 0xf01>; ++ }; +--- a/drivers/clocksource/Kconfig ++++ b/drivers/clocksource/Kconfig +@@ -67,6 +67,19 @@ config ARM_ARCH_TIMER + bool + select CLKSRC_OF if OF + ++config ARM_GLOBAL_TIMER ++ bool ++ select CLKSRC_OF if OF ++ help ++ This options enables support for the ARM global timer unit ++ ++config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK ++ bool ++ depends on ARM_GLOBAL_TIMER ++ default y ++ help ++ Use ARM global timer clock source as sched_clock ++ + config CLKSRC_METAG_GENERIC + def_bool y if METAG + help +--- a/drivers/clocksource/Makefile ++++ b/drivers/clocksource/Makefile +@@ -28,4 +28,5 @@ obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exyno + obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o + + obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o ++obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o + obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o +--- /dev/null ++++ b/drivers/clocksource/arm_global_timer.c +@@ -0,0 +1,325 @@ ++/* ++ * drivers/clocksource/arm_global_timer.c ++ * ++ * Copyright (C) 2013 STMicroelectronics (R&D) Limited. ++ * Author: Stuart Menefy <stuart.menefy@st.com> ++ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/clocksource.h> ++#include <linux/clockchips.h> ++#include <linux/cpu.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/of.h> ++#include <linux/of_irq.h> ++#include <linux/of_address.h> ++ ++#include <asm/sched_clock.h> ++#include <asm/cputype.h> ++ ++#define GT_COUNTER0 0x00 ++#define GT_COUNTER1 0x04 ++ ++#define GT_CONTROL 0x08 ++#define GT_CONTROL_TIMER_ENABLE BIT(0) /* this bit is NOT banked */ ++#define GT_CONTROL_COMP_ENABLE BIT(1) /* banked */ ++#define GT_CONTROL_IRQ_ENABLE BIT(2) /* banked */ ++#define GT_CONTROL_AUTO_INC BIT(3) /* banked */ ++ ++#define GT_INT_STATUS 0x0c ++#define GT_INT_STATUS_EVENT_FLAG BIT(0) ++ ++#define GT_COMP0 0x10 ++#define GT_COMP1 0x14 ++#define GT_AUTO_INC 0x18 ++ ++/* ++ * We are expecting to be clocked by the ARM peripheral clock. ++ * ++ * Note: it is assumed we are using a prescaler value of zero, so this is ++ * the units for all operations. ++ */ ++static void __iomem *gt_base; ++static unsigned long gt_clk_rate; ++static int gt_ppi; ++static struct clock_event_device __percpu *gt_evt; ++ ++/* ++ * To get the value from the Global Timer Counter register proceed as follows: ++ * 1. Read the upper 32-bit timer counter register ++ * 2. Read the lower 32-bit timer counter register ++ * 3. Read the upper 32-bit timer counter register again. If the value is ++ * different to the 32-bit upper value read previously, go back to step 2. ++ * Otherwise the 64-bit timer counter value is correct. ++ */ ++static u64 gt_counter_read(void) ++{ ++ u64 counter; ++ u32 lower; ++ u32 upper, old_upper; ++ ++ upper = readl_relaxed(gt_base + GT_COUNTER1); ++ do { ++ old_upper = upper; ++ lower = readl_relaxed(gt_base + GT_COUNTER0); ++ upper = readl_relaxed(gt_base + GT_COUNTER1); ++ } while (upper != old_upper); ++ ++ counter = upper; ++ counter <<= 32; ++ counter |= lower; ++ return counter; ++} ++ ++/** ++ * To ensure that updates to comparator value register do not set the ++ * Interrupt Status Register proceed as follows: ++ * 1. Clear the Comp Enable bit in the Timer Control Register. ++ * 2. Write the lower 32-bit Comparator Value Register. ++ * 3. Write the upper 32-bit Comparator Value Register. ++ * 4. Set the Comp Enable bit and, if necessary, the IRQ enable bit. ++ */ ++static void gt_compare_set(unsigned long delta, int periodic) ++{ ++ u64 counter = gt_counter_read(); ++ unsigned long ctrl = readl(gt_base + GT_CONTROL); ++ ++ counter += delta; ++ ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE); ++ ++ writel(ctrl, gt_base + GT_CONTROL); ++ writel(lower_32_bits(counter), gt_base + GT_COMP0); ++ writel(upper_32_bits(counter), gt_base + GT_COMP1); ++ ++ if (periodic) { ++ writel(delta, gt_base + GT_AUTO_INC); ++ ctrl |= GT_CONTROL_AUTO_INC; ++ } ++ ++ ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE; ++ writel(ctrl, gt_base + GT_CONTROL); ++} ++ ++static void gt_clockevent_set_mode(enum clock_event_mode mode, ++ struct clock_event_device *clk) ++{ ++ unsigned long ctrl; ++ ++ switch (mode) { ++ case CLOCK_EVT_MODE_PERIODIC: ++ gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1); ++ break; ++ case CLOCK_EVT_MODE_ONESHOT: ++ case CLOCK_EVT_MODE_UNUSED: ++ case CLOCK_EVT_MODE_SHUTDOWN: ++ ctrl = readl(gt_base + GT_CONTROL); ++ ctrl &= ~(GT_CONTROL_COMP_ENABLE | ++ GT_CONTROL_IRQ_ENABLE | GT_CONTROL_AUTO_INC); ++ writel(ctrl, gt_base + GT_CONTROL); ++ break; ++ default: ++ break; ++ } ++} ++ ++static int gt_clockevent_set_next_event(unsigned long evt, ++ struct clock_event_device *unused) ++{ ++ gt_compare_set(evt, 0); ++ return 0; ++} ++ ++static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id) ++{ ++ struct clock_event_device *evt = dev_id; ++ ++ if (readl_relaxed(gt_base + GT_INT_STATUS) & ++ GT_INT_STATUS_EVENT_FLAG) { ++ /** ++ * ERRATA 740657( Global Timer can send 2 interrupts for ++ * the same event in single-shot mode) ++ * Workaround: ++ * Either disable single-shot mode. ++ * Or ++ * Modify the Interrupt Handler to avoid the ++ * offending sequence. This is achieved by clearing ++ * the Global Timer flag _after_ having incremented ++ * the Comparator register value to a higher value. ++ */ ++ if (!(readl_relaxed(gt_base + GT_CONTROL) & ++ GT_CONTROL_AUTO_INC)) ++ gt_compare_set(ULONG_MAX, 0); ++ ++ writel_relaxed(GT_INT_STATUS_EVENT_FLAG, ++ gt_base + GT_INT_STATUS); ++ ++ evt->event_handler(evt); ++ return IRQ_HANDLED; ++ } ++ ++ return IRQ_NONE; ++} ++ ++static int __cpuinit gt_clockevents_init(struct clock_event_device *clk) ++{ ++ int cpu = smp_processor_id(); ++ ++ clk->name = "arm_global_timer"; ++ clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; ++ clk->set_mode = gt_clockevent_set_mode; ++ clk->set_next_event = gt_clockevent_set_next_event; ++ clk->cpumask = cpumask_of(cpu); ++ clk->rating = 300; ++ clk->irq = gt_ppi; ++ clockevents_config_and_register(clk, gt_clk_rate, ++ 1, 0xffffffff); ++ enable_percpu_irq(clk->irq, IRQ_TYPE_NONE); ++ return 0; ++} ++ ++static void gt_clockevents_stop(struct clock_event_device *clk) ++{ ++ gt_clockevent_set_mode(CLOCK_EVT_MODE_UNUSED, clk); ++ disable_percpu_irq(clk->irq); ++} ++ ++static cycle_t gt_clocksource_read(struct clocksource *cs) ++{ ++ return gt_counter_read(); ++} ++ ++static struct clocksource gt_clocksource = { ++ .name = "arm_global_timer", ++ .rating = 300, ++ .read = gt_clocksource_read, ++ .mask = CLOCKSOURCE_MASK(64), ++ .flags = CLOCK_SOURCE_IS_CONTINUOUS, ++}; ++ ++#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK ++static u32 notrace gt_sched_clock_read(void) ++{ ++ return gt_counter_read(); ++} ++#endif ++ ++static void __init gt_clocksource_init(void) ++{ ++ writel(0, gt_base + GT_CONTROL); ++ writel(0, gt_base + GT_COUNTER0); ++ writel(0, gt_base + GT_COUNTER1); ++ /* enables timer on all the cores */ ++ writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL); ++ ++#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK ++ setup_sched_clock(gt_sched_clock_read, 32, gt_clk_rate); ++#endif ++ clocksource_register_hz(>_clocksource, gt_clk_rate); ++} ++ ++static int __cpuinit gt_cpu_notify(struct notifier_block *self, ++ unsigned long action, void *hcpu) ++{ ++ switch (action & ~CPU_TASKS_FROZEN) { ++ case CPU_STARTING: ++ gt_clockevents_init(this_cpu_ptr(gt_evt)); ++ break; ++ case CPU_DYING: ++ gt_clockevents_stop(this_cpu_ptr(gt_evt)); ++ break; ++ } ++ ++ return NOTIFY_OK; ++} ++static struct notifier_block gt_cpu_nb __cpuinitdata = { ++ .notifier_call = gt_cpu_notify, ++}; ++ ++static void __init global_timer_of_register(struct device_node *np) ++{ ++ struct clk *gt_clk; ++ int err = 0; ++ ++ /* ++ * In r2p0 the comparators for each processor with the global timer ++ * fire when the timer value is greater than or equal to. In previous ++ * revisions the comparators fired when the timer value was equal to. ++ */ ++ if ((read_cpuid_id() & 0xf0000f) < 0x200000) { ++ pr_warn("global-timer: non support for this cpu version.\n"); ++ return; ++ } ++ ++ gt_ppi = irq_of_parse_and_map(np, 0); ++ if (!gt_ppi) { ++ pr_warn("global-timer: unable to parse irq\n"); ++ return; ++ } ++ ++ gt_base = of_iomap(np, 0); ++ if (!gt_base) { ++ pr_warn("global-timer: invalid base address\n"); ++ return; ++ } ++ ++ gt_clk = of_clk_get(np, 0); ++ if (!IS_ERR(gt_clk)) { ++ err = clk_prepare_enable(gt_clk); ++ if (err) ++ goto out_unmap; ++ } else { ++ pr_warn("global-timer: clk not found\n"); ++ err = -EINVAL; ++ goto out_unmap; ++ } ++ ++ gt_clk_rate = clk_get_rate(gt_clk); ++ gt_evt = alloc_percpu(struct clock_event_device); ++ if (!gt_evt) { ++ pr_warn("global-timer: can't allocate memory\n"); ++ err = -ENOMEM; ++ goto out_clk; ++ } ++ ++ err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt, ++ "gt", gt_evt); ++ if (err) { ++ pr_warn("global-timer: can't register interrupt %d (%d)\n", ++ gt_ppi, err); ++ goto out_free; ++ } ++ ++ err = register_cpu_notifier(>_cpu_nb); ++ if (err) { ++ pr_warn("global-timer: unable to register cpu notifier.\n"); ++ goto out_irq; ++ } ++ ++ /* Immediately configure the timer on the boot CPU */ ++ gt_clocksource_init(); ++ gt_clockevents_init(this_cpu_ptr(gt_evt)); ++ ++ return; ++ ++out_irq: ++ free_percpu_irq(gt_ppi, gt_evt); ++out_free: ++ free_percpu(gt_evt); ++out_clk: ++ clk_disable_unprepare(gt_clk); ++out_unmap: ++ iounmap(gt_base); ++ WARN(err, "ARM Global timer register failed (%d)\n", err); ++} ++ ++/* Only tested on r2p2 and r3p0 */ ++CLOCKSOURCE_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer", ++ global_timer_of_register); |