bcm53xx: add Linux 4.9 patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 159 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-4.9/030-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch b/target/linux/bcm53xx/patches-4.9/030-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
new file mode 100644
index 0000000..3067af8
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.9/030-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
@@ -0,0 +1,159 @@
+From ef3bc318adeb15b38688df6a583bafea2befce43 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Tue, 27 Sep 2016 11:27:11 -0600
+Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-3100
+
+Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two
+4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC
+algorithm.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                    |   1 +
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 ++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi |  13 +++
+ 3 files changed, 125 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+ create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm4709-netgear-r7000.dtb \
+ 	bcm4709-netgear-r8000.dtb \
+ 	bcm47094-dlink-dir-885l.dtb \
++	bcm47094-luxul-xwr-3100.dtb \
+ 	bcm47094-netgear-r8500.dtb \
+ 	bcm94708.dtb \
+ 	bcm94709.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -0,0 +1,111 @@
++/*
++ * Copyright 2016 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm47094.dtsi"
++#include "bcm5301x-nand-cs0-bch4.dtsi"
++
++/ {
++	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
++	model = "Luxul XWR-3100 V1";
++
++	chosen {
++		bootargs = "console=ttyS0,115200 earlycon";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		power	{
++			label = "bcm53xx:green:power";
++			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-on";
++		};
++
++		lan3	{
++			label = "bcm53xx:green:lan1";
++			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++
++		lan4	{
++			label = "bcm53xx:green:lan0";
++			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++
++		wan	{
++			label = "bcm53xx:green:wan";
++			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++
++		lan1	{
++			label = "bcm53xx:green:lan3";
++			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++
++		lan2	{
++			label = "bcm53xx:green:lan2";
++			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++
++		usb3	{
++			label = "bcm53xx:green:usb3";
++			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++
++		status	{
++			label = "bcm53xx:green:status";
++			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "timer";
++		};
++
++		2ghz {
++			label = "bcm53xx:green:2ghz";
++			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++
++		5ghz {
++			label = "bcm53xx:green:5ghz";
++			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&usb3 {
++	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++	status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+@@ -0,0 +1,13 @@
++/*
++ * Copyright 2016 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++#include "bcm5301x-nand-cs0.dtsi"
++
++&nandcs {
++	nand-ecc-algo = "bch";
++	nand-ecc-strength = <4>;
++	nand-ecc-step-size = <512>;
++};