brcm2708: remove linux 4.1 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48766

1 files changed, 0 insertions, 106 deletions

diff --git a/target/linux/brcm2708/patches-4.1/0053-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch b/target/linux/brcm2708/patches-4.1/0053-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch
deleted file mode 100644
index 04b7cbe..0000000
--- a/target/linux/brcm2708/patches-4.1/0053-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 04d0b82167574e134b822d80fd66b652ced46efd Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 6 Feb 2015 13:50:57 +0000
-Subject: [PATCH 053/222] BCM270x_DT: Add pwr_led, and the required "input"
- trigger
-
-The "input" trigger makes the associated GPIO an input.  This is to support
-the Raspberry Pi PWR LED, which is driven by external hardware in normal use.
-
-N.B. pwr_led is not available on Model A or B boards.
----
- drivers/leds/trigger/Kconfig         |  7 ++++
- drivers/leds/trigger/Makefile        |  1 +
- drivers/leds/trigger/ledtrig-input.c | 65 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 73 insertions(+)
- create mode 100644 drivers/leds/trigger/ledtrig-input.c
-
---- a/drivers/leds/trigger/Kconfig
-+++ b/drivers/leds/trigger/Kconfig
-@@ -126,4 +126,11 @@ config LEDS_TRIGGER_USBDEV
- 	  This allows LEDs to be controlled by the presence/activity of
- 	  an USB device. If unsure, say N.
- 
-+config LEDS_TRIGGER_INPUT
-+	tristate "LED Input Trigger"
-+	depends on LEDS_TRIGGERS
-+	help
-+	  This allows the GPIOs assigned to be LEDs to be initialised to inputs.
-+	  If unsure, say Y.
-+
- endif # LEDS_TRIGGERS
---- a/drivers/leds/trigger/Makefile
-+++ b/drivers/leds/trigger/Makefile
-@@ -8,3 +8,4 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU)		+= ledtr
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
- obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
- obj-$(CONFIG_LEDS_TRIGGER_CAMERA)	+= ledtrig-camera.o
-+obj-$(CONFIG_LEDS_TRIGGER_INPUT)	+= ledtrig-input.o
---- /dev/null
-+++ b/drivers/leds/trigger/ledtrig-input.c
-@@ -0,0 +1,65 @@
-+/*
-+ * Set LED GPIO to Input "Trigger"
-+ *
-+ * Copyright 2015 Phil Elwell <phil@raspberrypi.org>
-+ *
-+ * Based on Nick Forbes's ledtrig-default-on.c.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/leds.h>
-+#include <linux/gpio.h>
-+#include "../leds.h"
-+
-+/* This is a hack to get at the private 'gpio' member */
-+
-+struct gpio_led_data {
-+	struct led_classdev cdev;
-+	unsigned gpio;
-+};
-+
-+static void input_trig_activate(struct led_classdev *led_cdev)
-+{
-+	struct gpio_led_data *led_dat =
-+		container_of(led_cdev, struct gpio_led_data, cdev);
-+	if (gpio_is_valid(led_dat->gpio))
-+		gpio_direction_input(led_dat->gpio);
-+}
-+
-+static void input_trig_deactivate(struct led_classdev *led_cdev)
-+{
-+	struct gpio_led_data *led_dat =
-+		container_of(led_cdev, struct gpio_led_data, cdev);
-+	if (gpio_is_valid(led_dat->gpio))
-+		gpio_direction_output(led_dat->gpio, 0);
-+}
-+
-+static struct led_trigger input_led_trigger = {
-+	.name     = "input",
-+	.activate = input_trig_activate,
-+	.deactivate = input_trig_deactivate,
-+};
-+
-+static int __init input_trig_init(void)
-+{
-+	return led_trigger_register(&input_led_trigger);
-+}
-+
-+static void __exit input_trig_exit(void)
-+{
-+	led_trigger_unregister(&input_led_trigger);
-+}
-+
-+module_init(input_trig_init);
-+module_exit(input_trig_exit);
-+
-+MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.org>");
-+MODULE_DESCRIPTION("Set LED GPIO to Input \"trigger\"");
-+MODULE_LICENSE("GPL");