summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx/base-files
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2014-01-12 18:56:15 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2014-01-12 18:56:15 +0000
commitedab966e45dc53325de169b25d12dcaef6f64e10 (patch)
treea172bc7564f4fb68db94610de2ff33da3493bb10 /target/linux/brcm47xx/base-files
parentf4f31511fdbc833d7d0d0f24bf2a646d309c9d9e (diff)
downloadmtk-20170518-edab966e45dc53325de169b25d12dcaef6f64e10.zip
mtk-20170518-edab966e45dc53325de169b25d12dcaef6f64e10.tar.gz
mtk-20170518-edab966e45dc53325de169b25d12dcaef6f64e10.tar.bz2
brcm47xx: fix network failsafe indication
Remove the code used on the old switch driver. The Ethernet drive is loaded as a module and needs some time to get up therefor we added some wait function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39254
Diffstat (limited to 'target/linux/brcm47xx/base-files')
-rw-r--r--target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm35
-rw-r--r--target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm18
-rw-r--r--target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm40
3 files changed, 18 insertions, 75 deletions
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
index 76382e5..4b0d0eb 100644
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
@@ -1,37 +1,16 @@
#!/bin/sh
-set_preinit_iface() {
+preinit_iface() {
ifname=eth0
# hardware specific overrides
- case "$(cat /proc/diag/model)" in
- "Linksys WAP54G V1") ifname=eth1;;
- "ASUS WL-HDD") ifname=eth1;;
- "ASUS WL-300g") ifname=eth1;;
- "ASUS (unknown, BCM4702)") ifname=eth1;;
- "Sitecom WL-105b") ifname=eth1;;
+ case "$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)" in
+ "Asus WLHDD") ifname=eth1;;
+ "Asus WL300G") ifname=eth1;;
esac
- # The interface has to be up to configure the switch
- ifconfig $ifname 0.0.0.0 up
- [ -f /lib/modules/`uname -r`/switch-robo.ko ] && {
- rmmod switch-robo
- insmod switch-robo
- }
- [ -f /lib/modules/`uname -r`/switch-adm.ko ] && {
- rmmod switch-adm
- insmod switch-adm
- }
+ local try=0;
+ while [ $((try++)) -le 5 ] && [ ! -f /sys/class/net/$ifname/operstate ]; do sleep 1; done
}
-init_iface() {
- [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
- case "$(cat /proc/switch/eth0/cpuport)" in
- "5") cpu_port="5u*";;
- "8") cpu_port="8u*";;
- esac
- }
-}
-
-boot_hook_add preinit_main set_preinit_iface
-boot_hook_add preinit_main init_iface
+boot_hook_add preinit_main preinit_iface
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
deleted file mode 100644
index 7e030ac..0000000
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-failsafe_ip() {
- [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
- # The switch will connect all ports, The switch will leak
- # packages from wan to lan and vice versa in failsafe mode
- echo 1 > /proc/switch/eth0/reset
- echo 1 > /proc/switch/eth0/enable
- echo 0 > /proc/switch/eth0/enable_vlan
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
- }
-
- [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
- ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
- }
-}
-
-boot_hook_add failsafe failsafe_ip
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
index bc74939..aab50bf 100644
--- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
@@ -1,34 +1,16 @@
#!/bin/sh
-preinit_net_echo_send() {
- preinit_ip
+preinit_ip() {
+ # if the preinit interface isn't specified and ifname is set in
+ # preinit.arch use that interface
+ if [ -z "$pi_ifname" ]; then
+ pi_ifname=$ifname
+ fi
- [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
-
- echo 1 > /proc/switch/eth0/reset
- echo 1 > /proc/switch/eth0/enable
- echo 1 > /proc/switch/eth0/enable_vlan
-
- # this would be easier if we blasted the message across all ports
- # but we don't want packets leaking across interfaces
- for port in $(seq 0 4); do {
-
- echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
- sleep 1
-
- netmsg $pi_broadcast "$1"
- }; done
-
- } || netmsg $pi_broadcast "$1"
-}
-
-preinit_net_echo() {
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
- {
- [ "$pi_preinit_net_messages" = "y" ] || {
- [ "$pi_failsafe_net_message" = "true" ] &&
- [ "$pi_preinit_no_failsafe_netmsg" != "y" ]
- }
- } && preinit_net_echo_send $1
- }
+ ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+
+ local try=0;
+ while [ $((try++)) -le 5 ] && [ ! $(cat /sys/class/net/$pi_ifname/operstate) == "up" ]; do sleep 1; done
+ }
}