summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx/patches-3.6
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2013-01-03 02:05:22 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2013-01-03 02:05:22 +0000
commit4443997fd847e3893a62403e2f2e7d36c10f8450 (patch)
tree899afd080baf53f94ac772bea8c692e756989519 /target/linux/brcm47xx/patches-3.6
parent8f6bdcffa154191ac4a24a689fc4a66056411407 (diff)
downloadmtk-20170518-4443997fd847e3893a62403e2f2e7d36c10f8450.zip
mtk-20170518-4443997fd847e3893a62403e2f2e7d36c10f8450.tar.gz
mtk-20170518-4443997fd847e3893a62403e2f2e7d36c10f8450.tar.bz2
brcm47xx: add bgmac driver
This Ethernet driver is in early development stage and still has some problems. This was working on my bcm4716 based device. Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver. SVN-Revision: 34995
Diffstat (limited to 'target/linux/brcm47xx/patches-3.6')
-rw-r--r--target/linux/brcm47xx/patches-3.6/750-bgmac.patch1680
1 files changed, 1680 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-3.6/750-bgmac.patch b/target/linux/brcm47xx/patches-3.6/750-bgmac.patch
new file mode 100644
index 0000000..13698db
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.6/750-bgmac.patch
@@ -0,0 +1,1680 @@
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -263,7 +263,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+ }
+
+ /* query bus clock frequency for PMU-enabled chipcommon */
+-static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+
+@@ -292,6 +292,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+ }
+ return BCMA_CC_PMU_HT_CLOCK;
+ }
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
+
+ /* query cpu clock frequency for PMU-enabled chipcommon */
+ u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
+--- a/drivers/net/ethernet/broadcom/Kconfig
++++ b/drivers/net/ethernet/broadcom/Kconfig
+@@ -120,4 +120,10 @@ config BNX2X
+ To compile this driver as a module, choose M here: the module
+ will be called bnx2x. This is recommended.
+
++config BGMAC
++ tristate "Broadcom Gigabit driver"
++ depends on BCMA
++ ---help---
++ This driver supports Broadcom Gigabit core found in some BCM47xx SoCs.
++
+ endif # NET_VENDOR_BROADCOM
+--- a/drivers/net/ethernet/broadcom/Makefile
++++ b/drivers/net/ethernet/broadcom/Makefile
+@@ -9,3 +9,4 @@ obj-$(CONFIG_CNIC) += cnic.o
+ obj-$(CONFIG_BNX2X) += bnx2x/
+ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
+ obj-$(CONFIG_TIGON3) += tg3.o
++obj-$(CONFIG_BGMAC) += bgmac.o
+--- /dev/null
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -0,0 +1,1202 @@
++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
++
++#define bgmac_err(bgmac, fmt, ...) \
++ pr_err("u%d: " fmt, (bgmac)->core->core_unit, ##__VA_ARGS__)
++#define bgmac_warn(bgmac, fmt, ...) \
++ pr_warn("u%d: " fmt, (bgmac)->core->core_unit, ##__VA_ARGS__)
++#define bgmac_info(bgmac, fmt, ...) \
++ pr_info("u%d: " fmt, (bgmac)->core->core_unit, ##__VA_ARGS__)
++#define bgmac_debug(bgmac, fmt, ...) \
++ pr_debug("u%d: " fmt, (bgmac)->core->core_unit, ##__VA_ARGS__)
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/etherdevice.h>
++#include <linux/mii.h>
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++#include <bcm47xx_nvram.h>
++
++#include "bgmac.h"
++
++#define ETHER_MAX_LEN 1518
++
++MODULE_LICENSE("GPL");
++
++static const struct bcma_device_id bgmac_bcma_tbl[] = {
++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
++ BCMA_CORETABLE_END
++};
++MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
++
++static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ u32 val;
++ int i;
++
++ for (i = 0; i < timeout / 10; i++) {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ udelay(10);
++ }
++ pr_err("Timeout waiting for reg 0x%X\n", reg);
++ return false;
++}
++
++/**************************************************
++ * DMA
++ **************************************************/
++
++static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
++{
++ u32 val;
++ int i;
++
++ if (!ring->mmio_base)
++ return;
++
++ /* Susend DMA TX ring first.
++ * bgmac_wait_value doesn't support waiting for any of few values, so
++ * implement whole loop here.
++ */
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL,
++ BGMAC_DMA_TX_SUSPEND);
++ for (i = 0; i < 10000 / 10; i++) {
++ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
++ if (val == BGMAC_DMA_TX_STAT_DISABLED ||
++ val == BGMAC_DMA_TX_STAT_IDLEWAIT ||
++ val == BGMAC_DMA_TX_STAT_STOPPED) {
++ i = 0;
++ break;
++ }
++ udelay(10);
++ }
++ if (i)
++ bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X\n", ring->mmio_base);
++
++ /* Remove SUSPEND bit */
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0);
++ if (!bgmac_wait_value(bgmac->core,
++ ring->mmio_base + BGMAC_DMA_TX_STATUS,
++ BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED,
++ 10000)) {
++ bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", ring->mmio_base);
++ udelay(300);
++ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
++ if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED)
++ bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n", ring->mmio_base);
++ }
++}
++
++static void bgmac_dma_tx_enable(struct bgmac *bgmac,
++ struct bgmac_dma_ring *ring)
++{
++ u32 ctl;
++
++ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL);
++ ctl |= BGMAC_DMA_TX_ENABLE;
++ ctl |= BGMAC_DMA_TX_PARITY_DISABLE;
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
++}
++
++static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
++ struct bgmac_dma_ring *ring,
++ struct sk_buff *skb)
++{
++ struct device *dma_dev = bgmac->core->dma_dev;
++ struct bgmac_dma_desc *dma_desc;
++ struct bgmac_slot_info *slot;
++ u32 ctl0, ctl1;
++ int free_slots;
++
++ if (skb->len > BGMAC_DESC_CTL1_LEN) {
++ bgmac_err(bgmac, "Too long skb (%d)\n", skb->len);
++ return NETDEV_TX_BUSY;
++ }
++
++ if (ring->start <= ring->end)
++ free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
++ else
++ free_slots = ring->start - ring->end;
++ if (free_slots <= 1) {
++ bgmac_err(bgmac, "No free slots on ring 0x%X!\n", ring->mmio_base);
++ netif_stop_queue(bgmac->net_dev);
++ return NETDEV_TX_BUSY;
++ }
++
++ slot = &ring->slots[ring->end];
++ slot->skb = skb;
++ slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len, DMA_TO_DEVICE);
++ if (dma_mapping_error(dma_dev, slot->dma_addr)) {
++ bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n", ring->mmio_base);
++ return NETDEV_TX_BUSY;
++ }
++
++ ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF;
++ if (ring->end == ring->num_slots - 1)
++ ctl0 |= BGMAC_DESC_CTL0_EOT;
++ ctl1 = skb->len & BGMAC_DESC_CTL1_LEN;
++
++ dma_desc = ring->cpu_base;
++ dma_desc += ring->end;
++ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
++ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
++ dma_desc->ctl0 = cpu_to_le32(ctl0);
++ dma_desc->ctl1 = cpu_to_le32(ctl1);
++
++ wmb();
++
++ /* Increase ring->end to point empty slot. We tell hardware the first
++ * slot it shold *not* read.
++ */
++ if (++ring->end >= BGMAC_TX_RING_SLOTS)
++ ring->end = 0;
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
++ ring->end * sizeof(struct bgmac_dma_desc));
++
++ return NETDEV_TX_OK;
++}
++
++/* Free transmitted packets */
++static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
++{
++ struct device *dma_dev = bgmac->core->dma_dev;
++ struct bgmac_dma_desc *dma_desc;
++ struct bgmac_slot_info *slot;
++ int empty_slot;
++
++ /* The last slot that hardware didn't consume yet */
++ empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
++ empty_slot &= BGMAC_DMA_TX_STATDPTR;
++ empty_slot /= sizeof(struct bgmac_dma_desc);
++
++ while (ring->start != empty_slot) {
++ /* Set pointers */
++ dma_desc = ring->cpu_base;
++ dma_desc += ring->start;
++ slot = &ring->slots[ring->start];
++
++ if (slot->skb) {
++ /* Unmap no longer used buffer */
++ dma_unmap_single(dma_dev, slot->dma_addr,
++ slot->skb->len, DMA_TO_DEVICE);
++ slot->dma_addr = 0;
++
++ /* Free memory! */
++ dev_kfree_skb_any(slot->skb);
++ slot->skb = NULL;
++ } else {
++ bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d", ring->start, ring->end);
++ }
++
++ if (++ring->start >= BGMAC_TX_RING_SLOTS)
++ ring->start = 0;
++ }
++}
++
++static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
++{
++ if (!ring->mmio_base)
++ return;
++
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0);
++ if (!bgmac_wait_value(bgmac->core,
++ ring->mmio_base + BGMAC_DMA_RX_STATUS,
++ BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED,
++ 10000))
++ bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n", ring->mmio_base);
++}
++
++static void bgmac_dma_rx_enable(struct bgmac *bgmac,
++ struct bgmac_dma_ring *ring)
++{
++ u32 ctl;
++
++ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
++ ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
++ ctl |= BGMAC_DMA_RX_ENABLE;
++ ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
++ ctl |= BGMAC_DMA_RX_OVERFLOW_CONT;
++ ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT;
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl);
++}
++
++static void bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac,
++ struct bgmac_slot_info *slot)
++{
++ struct device *dma_dev = bgmac->core->dma_dev;
++ struct bgmac_rx_header *rx;
++
++ /* Alloc skb */
++ slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
++ if (!slot->skb)
++ bgmac_err(bgmac, "Allocation of skb failed!\n");
++
++ /* Poison - if everything goes fine, hardware will overwrite it */
++ rx = (struct bgmac_rx_header *)slot->skb->data;
++ rx->len = cpu_to_le16(0xdead);
++ rx->flags = cpu_to_le16(0xbeef);
++
++ /* Map skb for the DMA */
++ slot->dma_addr = dma_map_single(dma_dev, slot->skb->data,
++ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
++ if (dma_mapping_error(dma_dev, slot->dma_addr))
++ bgmac_err(bgmac, "DMA mapping error\n");
++ if (slot->dma_addr & 0xC0000000)
++ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
++}
++
++static void bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
++{
++ struct device *dma_dev = bgmac->core->dma_dev;
++ struct bgmac_dma_desc *dma_desc;
++ struct bgmac_slot_info *slot;
++ struct sk_buff *skb;
++ struct bgmac_rx_header *rx;
++ u32 end_slot;
++ u16 len, flags;
++
++ end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS);
++ end_slot &= BGMAC_DMA_RX_STATDPTR;
++ end_slot /= sizeof(struct bgmac_dma_desc);
++
++ ring->end = end_slot;
++
++ while (ring->start != ring->end) {
++ /* Set pointers */
++ dma_desc = ring->cpu_base;
++ dma_desc += ring->start;
++ slot = &ring->slots[ring->start];
++ skb = slot->skb;
++
++ /* Unmap buffer to make it accessible to the CPU */
++ dma_unmap_single(dma_dev, slot->dma_addr, BGMAC_RX_BUF_SIZE,
++ DMA_FROM_DEVICE);
++
++ /* Get info from the header */
++ rx = (struct bgmac_rx_header *)skb->data;
++ len = le16_to_cpu(rx->len);
++ flags = le16_to_cpu(rx->flags);
++
++ /* Check for poison and drop or pass packet */
++ if (len == 0xdead && flags == 0xbeef) {
++ bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", ring->start);
++ dev_kfree_skb_any(skb);
++ } else {
++ /* Remove header from the skb and pass it to the net */
++ skb_put(skb, BGMAC_RX_FRAME_OFFSET + len);
++ skb_pull(skb, BGMAC_RX_FRAME_OFFSET);
++ skb->protocol = eth_type_trans(skb, bgmac->net_dev);
++ netif_receive_skb(skb);
++ }
++
++ /* Alloc new skb */
++ bgmac_dma_rx_skb_for_slot(bgmac, slot);
++ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
++ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
++
++ if (++ring->start >= BGMAC_RX_RING_SLOTS)
++ ring->start = 0;
++ }
++}
++
++/* Does ring support unaligned addressing? */
++static bool bgmac_dma_unaligned(struct bgmac *bgmac,
++ struct bgmac_dma_ring *ring)
++{
++ if (ring->tx) {
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
++ 0xff0);
++ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO))
++ return true;
++ } else {
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
++ 0xff0);
++ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO))
++ return true;
++ }
++ return false;
++}
++
++static int bgmac_dma_alloc(struct bgmac *bgmac)
++{
++ struct device *dma_dev = bgmac->core->dma_dev;
++ struct bgmac_dma_ring *ring;
++ u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1, BGMAC_DMA_BASE2,
++ BGMAC_DMA_BASE3, };
++ int size; /* ring size: different for Tx and Rx */
++ int i;
++
++ BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base));
++ BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base));
++
++ if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) {
++ bgmac_err(bgmac, "Core does not report 64-bit DMA\n");
++ return -ENOTSUPP;
++ }
++
++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
++ ring = &bgmac->tx_ring[i];
++ ring->tx = true;
++ ring->num_slots = BGMAC_TX_RING_SLOTS;
++ ring->mmio_base = ring_base[i];
++ if (bgmac_dma_unaligned(bgmac, ring))
++ bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", ring->mmio_base);
++
++ /* Alloc ring of descriptors */
++ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
++ ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
++ &(ring->dma_base),
++ GFP_KERNEL);
++ if (!ring->cpu_base)
++ bgmac_err(bgmac, "Allocation of TX ring failed\n");
++ if (ring->dma_base & 0xC0000000)
++ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
++
++ /* No need to alloc TX slots yet */
++ }
++
++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
++ ring = &bgmac->rx_ring[i];
++ ring->tx = false;
++ ring->num_slots = BGMAC_RX_RING_SLOTS;
++ ring->mmio_base = ring_base[i];
++ if (bgmac_dma_unaligned(bgmac, ring))
++ bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", ring->mmio_base);
++
++ /* Alloc ring of descriptors */
++ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
++ ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
++ &(ring->dma_base),
++ GFP_KERNEL);
++ if (!ring->cpu_base)
++ bgmac_err(bgmac, "Allocation of RX ring failed\n");
++ if (ring->dma_base & 0xC0000000)
++ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
++
++ /* Alloc RX slots */
++ for (i = 0; i < ring->num_slots; i++)
++ bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[i]);
++ }
++
++ return 0;
++}
++
++static void bgmac_dma_init(struct bgmac *bgmac)
++{
++ struct bgmac_dma_ring *ring;
++ struct bgmac_dma_desc *dma_desc;
++ u32 ctl0, ctl1;
++ int i;
++
++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
++ ring = &bgmac->tx_ring[i];
++
++ /* We don't implement unaligned addressing, so enable first */
++ bgmac_dma_tx_enable(bgmac, ring);
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
++ lower_32_bits(ring->dma_base));
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI,
++ upper_32_bits(ring->dma_base));
++
++ ring->start = 0;
++ ring->end = 0; /* Points the slot that should *not* be read */
++ }
++
++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
++ ring = &bgmac->rx_ring[i];
++
++ /* We don't implement unaligned addressing, so enable first */
++ bgmac_dma_rx_enable(bgmac, ring);
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
++ lower_32_bits(ring->dma_base));
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI,
++ upper_32_bits(ring->dma_base));
++
++ for (i = 0, dma_desc = ring->cpu_base; i < ring->num_slots;
++ i++, dma_desc++) {
++ ctl0 = ctl1 = 0;
++
++ if (i == ring->num_slots - 1)
++ ctl0 |= BGMAC_DESC_CTL0_EOT;
++ ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
++ /* Is there any BGMAC device that requires extension? */
++ /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) &
++ * B43_DMA64_DCTL1_ADDREXT_MASK;
++ */
++
++ dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[i].dma_addr));
++ dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[i].dma_addr));
++ dma_desc->ctl0 = cpu_to_le32(ctl0);
++ dma_desc->ctl1 = cpu_to_le32(ctl1);
++ }
++
++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
++ ring->num_slots * sizeof(struct bgmac_dma_desc));
++
++ ring->start = 0;
++ ring->end = 0;
++ }
++}
++
++/**************************************************
++ * PHY ops
++ **************************************************/
++
++u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg)
++{
++ struct bcma_device *core;
++ u16 phy_access_addr;
++ u16 phy_ctl_addr;
++ u32 tmp;
++
++ BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK);
++ BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK);
++ BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT);
++ BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK);
++ BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT);
++ BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE);
++ BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START);
++ BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK);
++ BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK);
++ BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT);
++ BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE);
++
++ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
++ core = bgmac->core->bus->drv_gmac_cmn.core;
++ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
++ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
++ } else {
++ core = bgmac->core;
++ phy_access_addr = BGMAC_PHY_ACCESS;
++ phy_ctl_addr = BGMAC_PHY_CNTL;
++ }
++
++ tmp = bcma_read32(core, phy_ctl_addr);
++ tmp &= ~BGMAC_PC_EPA_MASK;
++ tmp |= phyaddr;
++ bcma_write32(core, phy_ctl_addr, tmp);
++
++ tmp = BGMAC_PA_START;
++ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
++ tmp |= reg << BGMAC_PA_REG_SHIFT;
++ bcma_write32(core, phy_access_addr, tmp);
++
++ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) {
++ bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n",
++ phyaddr, reg);
++ return 0xffff;
++ }
++
++ return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK;
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */
++void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value)
++{
++ struct bcma_device *core;
++ u16 phy_access_addr;
++ u16 phy_ctl_addr;
++ u32 tmp;
++
++ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
++ core = bgmac->core->bus->drv_gmac_cmn.core;
++ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
++ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
++ } else {
++ core = bgmac->core;
++ phy_access_addr = BGMAC_PHY_ACCESS;
++ phy_ctl_addr = BGMAC_PHY_CNTL;
++ }
++
++ tmp = bcma_read32(core, phy_ctl_addr);
++ tmp &= ~BGMAC_PC_EPA_MASK;
++ tmp |= phyaddr;
++ bcma_write32(core, phy_ctl_addr, tmp);
++
++ bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO);
++ if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO)
++ bgmac_warn(bgmac, "Error setting MDIO int\n");
++
++ tmp = BGMAC_PA_START;
++ tmp |= BGMAC_PA_WRITE;
++ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
++ tmp |= reg << BGMAC_PA_REG_SHIFT;
++ tmp |= value;
++ bcma_write32(core, phy_access_addr, tmp);
++
++ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000))
++ bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n",
++ phyaddr, reg);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */
++static void bgmac_phy_force(struct bgmac *bgmac)
++{
++ u16 ctl;
++ u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB |
++ BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX);
++
++ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
++ return;
++
++ if (bgmac->autoneg)
++ return;
++
++ ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL);
++ ctl &= mask;
++ if (bgmac->full_duplex)
++ ctl |= BGMAC_PHY_CTL_DUPLEX;
++ if (bgmac->speed == BGMAC_SPEED_100)
++ ctl |= BGMAC_PHY_CTL_SPEED_100;
++ else if (bgmac->speed == BGMAC_SPEED_1000)
++ ctl |= BGMAC_PHY_CTL_SPEED_1000;
++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */
++static void bgmac_phy_advertise(struct bgmac *bgmac)
++{
++ u16 adv;
++
++ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
++ return;
++
++ if (bgmac->autoneg)
++ return;
++
++ /* Adv selected 10/100 speeds */
++ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV);
++ adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL |
++ BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL);
++ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
++ adv |= BGMAC_PHY_ADV_10HALF;
++ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
++ adv |= BGMAC_PHY_ADV_100HALF;
++ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
++ adv |= BGMAC_PHY_ADV_10FULL;
++ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
++ adv |= BGMAC_PHY_ADV_100FULL;
++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv);
++
++ /* Adv selected 1000 speeds */
++ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2);
++ adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL);
++ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
++ adv |= BGMAC_PHY_ADV2_1000HALF;
++ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
++ adv |= BGMAC_PHY_ADV2_1000FULL;
++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv);
++
++ /* Restart */
++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
++ bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) |
++ BGMAC_PHY_CTL_RESTART);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
++static void bgmac_phy_init(struct bgmac *bgmac)
++{
++ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
++ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
++ u8 i;
++
++ if (ci->id == BCMA_CHIP_ID_BCM5356) {
++ for (i = 0; i < 5; i++) {
++ bgmac_phy_write(bgmac, i, 0x1f, 0x008b);
++ bgmac_phy_write(bgmac, i, 0x15, 0x0100);
++ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
++ bgmac_phy_write(bgmac, i, 0x12, 0x2aaa);
++ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
++ }
++ }
++ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) ||
++ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) ||
++ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) {
++ bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0);
++ bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0);
++ for (i = 0; i < 5; i++) {
++ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
++ bgmac_phy_write(bgmac, i, 0x16, 0x5284);
++ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
++ bgmac_phy_write(bgmac, i, 0x17, 0x0010);
++ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
++ bgmac_phy_write(bgmac, i, 0x16, 0x5296);
++ bgmac_phy_write(bgmac, i, 0x17, 0x1073);
++ bgmac_phy_write(bgmac, i, 0x17, 0x9073);
++ bgmac_phy_write(bgmac, i, 0x16, 0x52b6);
++ bgmac_phy_write(bgmac, i, 0x17, 0x9273);
++ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
++ }
++ }
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */
++static void bgmac_phy_reset(struct bgmac *bgmac)
++{
++ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
++ return;
++
++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
++ BGMAC_PHY_CTL_RESET);
++ udelay(100);
++ if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) &
++ BGMAC_PHY_CTL_RESET)
++ bgmac_err(bgmac, "PHY reset failed\n");
++ bgmac_phy_init(bgmac);
++}
++
++/**************************************************
++ * Chip ops
++ **************************************************/
++
++/* TODO: can we just drop @force? Can we don't reset MAC at all if there is
++ * nothing to change? Try if after stabilizng driver.
++ */
++static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set,
++ bool force)
++{
++ u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
++ u32 new_val = (cmdcfg & mask) | set;
++
++ bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR);
++ udelay(2);
++
++ if (new_val != cmdcfg || force)
++ bgmac_write(bgmac, BGMAC_CMDCFG, new_val);
++
++ bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR);
++ udelay(2);
++}
++
++static void bgmac_chip_stats_update(struct bgmac *bgmac)
++{
++ int i;
++
++ if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) {
++ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
++ bgmac->mib_tx_regs[i] =
++ bgmac_read(bgmac,
++ BGMAC_TX_GOOD_OCTETS + (i * 4));
++ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
++ bgmac->mib_rx_regs[i] =
++ bgmac_read(bgmac,
++ BGMAC_RX_GOOD_OCTETS + (i * 4));
++ }
++
++ /* TODO: what else? how to handle BCM4706? */
++}
++
++static void bgmac_clear_mib(struct bgmac *bgmac)
++{
++ int i;
++
++ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT)
++ return;
++
++ bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR);
++ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
++ bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4));
++ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
++ bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4));
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
++static void bgmac_speed(struct bgmac *bgmac, int speed)
++{
++ u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD);
++ u32 set = 0;
++
++ if (speed & BGMAC_SPEED_10)
++ set |= BGMAC_CMDCFG_ES_10;
++ if (speed & BGMAC_SPEED_100)
++ set |= BGMAC_CMDCFG_ES_100;
++ if (speed & BGMAC_SPEED_1000)
++ set |= BGMAC_CMDCFG_ES_1000;
++ if (!bgmac->full_duplex)
++ set |= BGMAC_CMDCFG_HD;
++ bgmac_cmdcfg_maskset(bgmac, mask, set, true);
++}
++
++static void bgmac_miiconfig(struct bgmac *bgmac)
++{
++ u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
++ BGMAC_DS_MM_SHIFT;
++ if (imode == 0 || imode == 1) {
++ if (bgmac->autoneg)
++ bgmac_speed(bgmac, BGMAC_SPEED_100);
++ else
++ bgmac_speed(bgmac, bgmac->speed);
++ }
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
++static void bgmac_chip_reset(struct bgmac *bgmac)
++{
++ struct bcma_device *core = bgmac->core;
++ struct bcma_bus *bus = core->bus;
++ struct bcma_chipinfo *ci = &bus->chipinfo;
++ u32 flags = 0;
++ u32 iost;
++ int i;
++
++ if (bcma_core_is_enabled(core)) {
++ if (!bgmac->stats_grabbed) {
++ bgmac_chip_stats_update(bgmac);
++ bgmac->stats_grabbed = true;
++ }
++
++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
++ bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]);
++
++ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
++ udelay(1);
++
++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
++ bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]);
++
++ /* TODO: Clear software multicast filter list */
++ }
++
++ iost = bcma_aread32(core, BCMA_IOST);
++ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) ||
++ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
++ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9))
++ iost &= ~BGMAC_BCMA_IOST_ATTACHED;
++
++ if (iost & BGMAC_BCMA_IOST_ATTACHED) {
++ flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
++ if (!bgmac->has_robosw)
++ flags |= BGMAC_BCMA_IOCTL_SW_RESET;
++ }
++
++ bcma_core_enable(core, flags);
++
++ if (core->id.rev > 2) {
++ bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8);
++ bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24,
++ 1000);
++ }
++
++ if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 ||
++ ci->id == BCMA_CHIP_ID_BCM53572) {
++ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
++ u8 et_swtype = 0;
++ u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY |
++ BGMAC_CHIPCTL_1_IF_TYPE_RMII;
++ char buf[2];
++ if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) {
++ if (kstrtou8(buf, 0, &et_swtype))
++ bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", buf);
++ et_swtype &= 0x0f;
++ et_swtype <<= 4;
++ sw_type = et_swtype;
++ } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) {
++ sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
++ } else if (0) {
++ /* TODO */
++ }
++ bcma_chipco_chipctl_maskset(cc, 1,
++ ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
++ BGMAC_CHIPCTL_1_SW_TYPE_MASK),
++ sw_type);
++ }
++
++ if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
++ bcma_awrite32(core, BCMA_IOCTL,
++ bcma_aread32(core, BCMA_IOCTL) &
++ ~BGMAC_BCMA_IOCTL_SW_RESET);
++
++ /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
++ * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
++ * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
++ * be keps until taking MAC out of the reset.
++ */
++ bgmac_cmdcfg_maskset(bgmac,
++ ~(BGMAC_CMDCFG_TE |
++ BGMAC_CMDCFG_RE |
++ BGMAC_CMDCFG_RPI |
++ BGMAC_CMDCFG_TAI |
++ BGMAC_CMDCFG_HD |
++ BGMAC_CMDCFG_ML |
++ BGMAC_CMDCFG_CFE |
++ BGMAC_CMDCFG_RL |
++ BGMAC_CMDCFG_RED |
++ BGMAC_CMDCFG_PE |
++ BGMAC_CMDCFG_TPI |
++ BGMAC_CMDCFG_PAD_EN |
++ BGMAC_CMDCFG_PF),
++ BGMAC_CMDCFG_PROM |
++ BGMAC_CMDCFG_NLC |
++ BGMAC_CMDCFG_CFE |
++ BGMAC_CMDCFG_SR,
++ false);
++
++ bgmac_clear_mib(bgmac);
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
++ bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0,
++ BCMA_GMAC_CMN_PC_MTE);
++ else
++ bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE);
++ bgmac_miiconfig(bgmac);
++ bgmac_phy_init(bgmac);
++
++ bgmac->int_status = 0;
++}
++
++static void bgmac_chip_intrs_on(struct bgmac *bgmac)
++{
++ bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask);
++}
++
++static void bgmac_chip_intrs_off(struct bgmac *bgmac)
++{
++ bgmac_write(bgmac, BGMAC_INT_MASK, 0);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */
++static void bgmac_enable(struct bgmac *bgmac)
++{
++ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
++ u32 cmdcfg;
++ u32 mode;
++ u32 rxq_ctl;
++ u32 fl_ctl;
++ u16 bp_clk;
++ u8 mdp;
++
++ cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
++ bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE),
++ BGMAC_CMDCFG_SR, true);
++ udelay(2);
++ cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE;
++ bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg);
++
++ mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
++ BGMAC_DS_MM_SHIFT;
++ if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0)
++ bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
++ if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2)
++ bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0,
++ BGMAC_CHIPCTL_1_RXC_DLL_BYPASS);
++
++ switch (ci->id) {
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM53572:
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM47162:
++ fl_ctl = 0x03cb04cb;
++ if (ci->id == BCMA_CHIP_ID_BCM5357 ||
++ ci->id == BCMA_CHIP_ID_BCM4749 ||
++ ci->id == BCMA_CHIP_ID_BCM53572)
++ fl_ctl = 0x2300e1;
++ bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl);
++ bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff);
++ break;
++ }
++
++ rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
++ rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
++ bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
++ mdp = (bp_clk * 128 / 1000) - 3;
++ rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
++ bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
++static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
++{
++ struct ssb_sprom *sprom = &bgmac->core->bus->sprom;
++ struct bgmac_dma_ring *ring;
++ u32 tmp;
++ u8 *mac;
++ int i;
++
++ /* 1 interrupt per received frame */
++ bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT);
++
++ /* enable 802.3x tx flow control (honor received PAUSE frames) */
++ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true);
++
++ if (bgmac->net_dev->flags & IFF_PROMISC)
++ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false);
++ else
++ bgmac_warn(bgmac, "Software filtering is not supported yet\n");
++
++ mac = bgmac->core->core_unit ? sprom->et1mac : sprom->et0mac;
++ tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
++ bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp);
++ tmp = (mac[4] << 8) | mac[5];
++ bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp);
++ memcpy(bgmac->net_dev->dev_addr, mac, 6);
++
++ if (bgmac->loopback)
++ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true);
++ else
++ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true);
++
++ bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
++
++ if (!bgmac->autoneg) {
++ bgmac_speed(bgmac, bgmac->speed);
++ bgmac_phy_force(bgmac);
++ } else if (bgmac->speed) { /* if there is anything to adv */
++ bgmac_phy_advertise(bgmac);
++ }
++
++ if (full_init) {
++ bgmac_dma_init(bgmac);
++ if (1) /* FIXME: is there any case we don't want IRQs? */
++ bgmac_chip_intrs_on(bgmac);
++ } else {
++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
++ ring = &bgmac->rx_ring[i];
++ bgmac_dma_rx_enable(bgmac, ring);
++ }
++ }
++
++ bgmac_enable(bgmac);
++}
++
++static irqreturn_t bgmac_interrupt(int irq, void *dev_id)
++{
++ struct bgmac *bgmac = netdev_priv(dev_id);
++
++ u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS);
++ int_status &= bgmac->int_mask;
++
++ if (!int_status)
++ return IRQ_NONE;
++
++ /* Ack */
++ bgmac_write(bgmac, BGMAC_INT_STATUS, int_status);
++
++ /* Disable new interrupts until handling existing ones */
++ bgmac_chip_intrs_off(bgmac);
++
++ bgmac->int_status = int_status;
++
++ return IRQ_WAKE_THREAD;
++}
++
++static irqreturn_t bgmac_interrupt_thread(int irq, void *dev_id)
++{
++ struct bgmac *bgmac = netdev_priv(dev_id);
++ struct bgmac_dma_ring *ring;
++
++ if (bgmac->int_status & BGMAC_IS_TX0) {
++ ring = &bgmac->tx_ring[0];
++ bgmac_dma_tx_free(bgmac, ring);
++ bgmac->int_status &= ~BGMAC_IS_TX0;
++ }
++
++ if (bgmac->int_status & BGMAC_IS_RX) {
++ ring = &bgmac->rx_ring[0];
++ bgmac_dma_rx_read(bgmac, ring);
++ bgmac->int_status &= ~BGMAC_IS_RX;
++ }
++
++ if (bgmac->int_status) {
++ bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status);
++ bgmac->int_status = 0;
++ }
++
++ bgmac_chip_intrs_on(bgmac);
++ return IRQ_HANDLED;
++}
++
++/**************************************************
++ * net_device ops
++ **************************************************/
++
++static int bgmac_open(struct net_device *net_dev)
++{
++ struct bgmac *bgmac = netdev_priv(net_dev);
++
++ bgmac_chip_reset(bgmac);
++ /* Specs say about reclaiming rings here, but we do that in DMA init */
++ bgmac_chip_init(bgmac, true);
++
++ if (request_threaded_irq(bgmac->core->irq, bgmac_interrupt,
++ bgmac_interrupt_thread, IRQF_SHARED,
++ KBUILD_MODNAME, net_dev) < 0)
++ bgmac_err(bgmac, "IRQ request error!\n");
++
++ return 0;
++}
++
++static int bgmac_stop(struct net_device *net_dev)
++{
++ struct bgmac *bgmac = netdev_priv(net_dev);
++
++ bgmac_chip_intrs_off(bgmac);
++
++ free_irq(bgmac->core->irq, net_dev);
++
++ /* TODO */
++
++ return 0;
++}
++
++static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
++{
++ struct bgmac *bgmac = netdev_priv(net_dev);
++ struct mii_ioctl_data *data = if_mii(ifr);
++
++ switch (cmd) {
++ case SIOCGMIIPHY:
++ data->phy_id = bgmac->phyaddr;
++ /* fallthru */
++ case SIOCGMIIREG:
++ if (!netif_running(net_dev))
++ return -EAGAIN;
++ data->val_out = bgmac_phy_read(bgmac, bgmac->phyaddr,
++ data->reg_num & 0x1f);
++ return 0;
++ case SIOCSMIIREG:
++ if (!netif_running(net_dev))
++ return -EAGAIN;
++ bgmac_phy_write(bgmac, bgmac->phyaddr, data->reg_num & 0x1f,
++ data->val_in);
++ return 0;
++ default:
++ return -EOPNOTSUPP;
++ }
++}
++
++static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb,
++ struct net_device *net_dev)
++{
++ struct bgmac *bgmac = netdev_priv(net_dev);
++ struct bgmac_dma_ring *ring;
++
++ /* No QOS support yet */
++ ring = &bgmac->tx_ring[0];
++ return bgmac_dma_tx_add(bgmac, ring, skb);
++}
++
++static const struct net_device_ops bgmac_netdev_ops = {
++ .ndo_open = bgmac_open,
++ .ndo_stop = bgmac_stop,
++ .ndo_do_ioctl = bgmac_ioctl,
++ .ndo_start_xmit = bgmac_start_xmit,
++};
++
++/**************************************************
++ * BCMA bus ops
++ **************************************************/
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
++static int bgmac_probe(struct bcma_device *core)
++{
++ struct net_device *net_dev;
++ struct bgmac *bgmac;
++ struct ssb_sprom *sprom = &core->bus->sprom;
++ int err;
++
++ /* Allocation and references */
++ net_dev = alloc_etherdev(sizeof(*bgmac));
++ if (!net_dev)
++ return -ENOMEM;
++ net_dev->netdev_ops = &bgmac_netdev_ops;
++ net_dev->irq = core->irq;
++ bgmac = netdev_priv(net_dev);
++ bgmac->net_dev = net_dev;
++ bgmac->core = core;
++ bcma_set_drvdata(core, bgmac);
++
++ /* Defaults */
++ bgmac->autoneg = true;
++ bgmac->full_duplex = true;
++ bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000;
++
++ /* On BCM4706 we need common core to access PHY */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ !core->bus->drv_gmac_cmn.core) {
++ bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n");
++ return -ENODEV;
++ }
++ bgmac->cmn = core->bus->drv_gmac_cmn.core;
++
++ bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
++ sprom->et0phyaddr;
++ bgmac->phyaddr &= BGMAC_PHY_MASK;
++ if (bgmac->phyaddr == BGMAC_PHY_MASK) {
++ bgmac_err(bgmac, "No PHY found\n");
++ return -ENODEV;
++ }
++ bgmac_info(bgmac, "Found PHY addr: %d\n", bgmac->phyaddr);
++
++ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
++ bgmac_err(bgmac, "PCI setup not implemented\n");
++ return -ENOTSUPP;
++ }
++
++ bgmac_chip_reset(bgmac);
++
++ bgmac_dma_alloc(bgmac);
++
++ bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
++ if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) > 0)
++ bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
++
++ /* TODO: reset the external phy */
++ bgmac_phy_reset(bgmac);
++
++ bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
++ BGMAC_BFL_ENETROBO);
++ if (bgmac->has_robosw)
++ bgmac_err(bgmac, "Support for Roboswitch not implemented\n");
++
++ if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
++ bgmac_err(bgmac, "Support for ADMtek ethernet switch not implemented\n");
++
++ err = register_netdev(bgmac->net_dev);
++ if (err) {
++ bgmac_err(bgmac, "Cannot register net device\n");
++ return -ENOTSUPP;
++ }
++
++ return 0;
++}
++
++static void bgmac_remove(struct bcma_device *core)
++{
++ struct bgmac *bgmac = bcma_get_drvdata(core);
++
++ unregister_netdev(bgmac->net_dev);
++ free_netdev(bgmac->net_dev);
++ bcma_set_drvdata(core, NULL);
++}
++
++static struct bcma_driver bgmac_bcma_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = bgmac_bcma_tbl,
++ .probe = bgmac_probe,
++ .remove = bgmac_remove,
++};
++
++static int __init bgmac_init(void)
++{
++ int err;
++
++ err = bcma_driver_register(&bgmac_bcma_driver);
++ if (err)
++ return err;
++ pr_info("Broadcom 47xx GMAC driver loaded\n");
++
++ return 0;
++}
++
++static void __exit bgmac_exit(void)
++{
++ bcma_driver_unregister(&bgmac_bcma_driver);
++}
++
++module_init(bgmac_init)
++module_exit(bgmac_exit)
+--- /dev/null
++++ b/drivers/net/ethernet/broadcom/bgmac.h
+@@ -0,0 +1,424 @@
++#ifndef _BGMAC_H
++#define _BGMAC_H
++
++#include <linux/bcma/bcma.h>
++
++#define BGMAC_DEV_CTL 0x000
++#define BGMAC_DC_TSM 0x00000002
++#define BGMAC_DC_CFCO 0x00000004
++#define BGMAC_DC_RLSS 0x00000008
++#define BGMAC_DC_MROR 0x00000010
++#define BGMAC_DC_FCM_MASK 0x00000060
++#define BGMAC_DC_FCM_SHIFT 5
++#define BGMAC_DC_NAE 0x00000080
++#define BGMAC_DC_TF 0x00000100
++#define BGMAC_DC_RDS_MASK 0x00030000
++#define BGMAC_DC_RDS_SHIFT 16
++#define BGMAC_DC_TDS_MASK 0x000c0000
++#define BGMAC_DC_TDS_SHIFT 18
++#define BGMAC_DEV_STATUS 0x004 /* Configuration of the interface */
++#define BGMAC_DS_RBF 0x00000001
++#define BGMAC_DS_RDF 0x00000002
++#define BGMAC_DS_RIF 0x00000004
++#define BGMAC_DS_TBF 0x00000008
++#define BGMAC_DS_TDF 0x00000010
++#define BGMAC_DS_TIF 0x00000020
++#define BGMAC_DS_PO 0x00000040
++#define BGMAC_DS_MM_MASK 0x00000300 /* Mode of the interface */
++#define BGMAC_DS_MM_SHIFT 8
++#define BGMAC_BIST_STATUS 0x00c
++#define BGMAC_INT_STATUS 0x020 /* Interrupt status */
++#define BGMAC_IS_MRO 0x00000001
++#define BGMAC_IS_MTO 0x00000002
++#define BGMAC_IS_TFD 0x00000004
++#define BGMAC_IS_LS 0x00000008
++#define BGMAC_IS_MDIO 0x00000010
++#define BGMAC_IS_MR 0x00000020
++#define BGMAC_IS_MT 0x00000040
++#define BGMAC_IS_TO 0x00000080
++#define BGMAC_IS_DESC_ERR 0x00000400 /* Descriptor error */
++#define BGMAC_IS_DATA_ERR 0x00000800 /* Data error */
++#define BGMAC_IS_DESC_PROT_ERR 0x00001000 /* Descriptor protocol error */
++#define BGMAC_IS_RX_DESC_UNDERF 0x00002000 /* Receive descriptor underflow */
++#define BGMAC_IS_RX_F_OVERF 0x00004000 /* Receive fifi overflow */
++#define BGMAC_IS_TX_F_UNDERF 0x00008000 /* Transmit fifo underflow */
++#define BGMAC_IS_RX 0x00010000 /* Interrupt for RX queue 0 */
++#define BGMAC_IS_TX0 0x01000000 /* Interrupt for TX queue 0 */
++#define BGMAC_IS_TX1 0x02000000 /* Interrupt for TX queue 1 */
++#define BGMAC_IS_TX2 0x04000000 /* Interrupt for TX queue 2 */
++#define BGMAC_IS_TX3 0x08000000 /* Interrupt for TX queue 3 */
++#define BGMAC_IS_TX_MASK 0x0f000000
++#define BGMAC_IS_INTMASK 0x0f01fcff
++#define BGMAC_IS_ERRMASK 0x0000fc00
++#define BGMAC_INT_MASK 0x024 /* Interrupt mask */
++#define BGMAC_GP_TIMER 0x028
++#define BGMAC_INT_RECV_LAZY 0x100
++#define BGMAC_IRL_TO_MASK 0x00ffffff
++#define BGMAC_IRL_FC_MASK 0xff000000
++#define BGMAC_IRL_FC_SHIFT 24 /* Shift the number of interrupts triggered per received frame */
++#define BGMAC_FLOW_CTL_THRESH 0x104 /* Flow control thresholds */
++#define BGMAC_WRRTHRESH 0x108
++#define BGMAC_GMAC_IDLE_CNT_THRESH 0x10c
++#define BGMAC_PHY_ACCESS 0x180 /* PHY access address */
++#define BGMAC_PA_DATA_MASK 0x0000ffff
++#define BGMAC_PA_ADDR_MASK 0x001f0000
++#define BGMAC_PA_ADDR_SHIFT 16
++#define BGMAC_PA_REG_MASK 0x1f000000
++#define BGMAC_PA_REG_SHIFT 24
++#define BGMAC_PA_WRITE 0x20000000
++#define BGMAC_PA_START 0x40000000
++#define BGMAC_PHY_CNTL 0x188 /* PHY control address */
++#define BGMAC_PC_EPA_MASK 0x0000001f
++#define BGMAC_PC_MCT_MASK 0x007f0000
++#define BGMAC_PC_MCT_SHIFT 16
++#define BGMAC_PC_MTE 0x00800000
++#define BGMAC_TXQ_CTL 0x18c
++#define BGMAC_TXQ_CTL_DBT_MASK 0x00000fff
++#define BGMAC_TXQ_CTL_DBT_SHIFT 0
++#define BGMAC_RXQ_CTL 0x190
++#define BGMAC_RXQ_CTL_DBT_MASK 0x00000fff
++#define BGMAC_RXQ_CTL_DBT_SHIFT 0
++#define BGMAC_RXQ_CTL_PTE 0x00001000
++#define BGMAC_RXQ_CTL_MDP_MASK 0x3f000000
++#define BGMAC_RXQ_CTL_MDP_SHIFT 24
++#define BGMAC_GPIO_SELECT 0x194
++#define BGMAC_GPIO_OUTPUT_EN 0x198
++/* For 0x1e0 see BCMA_CLKCTLST */
++#define BGMAC_HW_WAR 0x1e4
++#define BGMAC_PWR_CTL 0x1e8
++#define BGMAC_DMA_BASE0 0x200 /* Tx and Rx controller */
++#define BGMAC_DMA_BASE1 0x240 /* Tx controller only */
++#define BGMAC_DMA_BASE2 0x280 /* Tx controller only */
++#define BGMAC_DMA_BASE3 0x2C0 /* Tx controller only */
++#define BGMAC_TX_GOOD_OCTETS 0x300
++#define BGMAC_TX_GOOD_OCTETS_HIGH 0x304
++#define BGMAC_TX_GOOD_PKTS 0x308
++#define BGMAC_TX_OCTETS 0x30c
++#define BGMAC_TX_OCTETS_HIGH 0x310
++#define BGMAC_TX_PKTS 0x314
++#define BGMAC_TX_BROADCAST_PKTS 0x318
++#define BGMAC_TX_MULTICAST_PKTS 0x31c
++#define BGMAC_TX_LEN_64 0x320
++#define BGMAC_TX_LEN_65_TO_127 0x324
++#define BGMAC_TX_LEN_128_TO_255 0x328
++#define BGMAC_TX_LEN_256_TO_511 0x32c
++#define BGMAC_TX_LEN_512_TO_1023 0x330
++#define BGMAC_TX_LEN_1024_TO_1522 0x334
++#define BGMAC_TX_LEN_1523_TO_2047 0x338
++#define BGMAC_TX_LEN_2048_TO_4095 0x33c
++#define BGMAC_TX_LEN_4095_TO_8191 0x340
++#define BGMAC_TX_LEN_8192_TO_MAX 0x344
++#define BGMAC_TX_JABBER_PKTS 0x348 /* Error */
++#define BGMAC_TX_OVERSIZE_PKTS 0x34c /* Error */
++#define BGMAC_TX_FRAGMENT_PKTS 0x350
++#define BGMAC_TX_UNDERRUNS 0x354 /* Error */
++#define BGMAC_TX_TOTAL_COLS 0x358
++#define BGMAC_TX_SINGLE_COLS 0x35c
++#define BGMAC_TX_MULTIPLE_COLS 0x360
++#define BGMAC_TX_EXCESSIVE_COLS 0x364 /* Error */
++#define BGMAC_TX_LATE_COLS 0x368 /* Error */
++#define BGMAC_TX_DEFERED 0x36c
++#define BGMAC_TX_CARRIER_LOST 0x370
++#define BGMAC_TX_PAUSE_PKTS 0x374
++#define BGMAC_TX_UNI_PKTS 0x378
++#define BGMAC_TX_Q0_PKTS 0x37c
++#define BGMAC_TX_Q0_OCTETS 0x380
++#define BGMAC_TX_Q0_OCTETS_HIGH 0x384
++#define BGMAC_TX_Q1_PKTS 0x388
++#define BGMAC_TX_Q1_OCTETS 0x38c
++#define BGMAC_TX_Q1_OCTETS_HIGH 0x390
++#define BGMAC_TX_Q2_PKTS 0x394
++#define BGMAC_TX_Q2_OCTETS 0x398
++#define BGMAC_TX_Q2_OCTETS_HIGH 0x39c
++#define BGMAC_TX_Q3_PKTS 0x3a0
++#define BGMAC_TX_Q3_OCTETS 0x3a4
++#define BGMAC_TX_Q3_OCTETS_HIGH 0x3a8
++#define BGMAC_RX_GOOD_OCTETS 0x3b0
++#define BGMAC_RX_GOOD_OCTETS_HIGH 0x3b4
++#define BGMAC_RX_GOOD_PKTS 0x3b8
++#define BGMAC_RX_OCTETS 0x3bc
++#define BGMAC_RX_OCTETS_HIGH 0x3c0
++#define BGMAC_RX_PKTS 0x3c4
++#define BGMAC_RX_BROADCAST_PKTS 0x3c8
++#define BGMAC_RX_MULTICAST_PKTS 0x3cc
++#define BGMAC_RX_LEN_64 0x3d0
++#define BGMAC_RX_LEN_65_TO_127 0x3d4
++#define BGMAC_RX_LEN_128_TO_255 0x3d8
++#define BGMAC_RX_LEN_256_TO_511 0x3dc
++#define BGMAC_RX_LEN_512_TO_1023 0x3e0
++#define BGMAC_RX_LEN_1024_TO_1522 0x3e4
++#define BGMAC_RX_LEN_1523_TO_2047 0x3e8
++#define BGMAC_RX_LEN_2048_TO_4095 0x3ec
++#define BGMAC_RX_LEN_4095_TO_8191 0x3f0
++#define BGMAC_RX_LEN_8192_TO_MAX 0x3f4
++#define BGMAC_RX_JABBER_PKTS 0x3f8 /* Error */
++#define BGMAC_RX_OVERSIZE_PKTS 0x3fc /* Error */
++#define BGMAC_RX_FRAGMENT_PKTS 0x400
++#define BGMAC_RX_MISSED_PKTS 0x404 /* Error */
++#define BGMAC_RX_CRC_ALIGN_ERRS 0x408 /* Error */
++#define BGMAC_RX_UNDERSIZE 0x40c /* Error */
++#define BGMAC_RX_CRC_ERRS 0x410 /* Error */
++#define BGMAC_RX_ALIGN_ERRS 0x414 /* Error */
++#define BGMAC_RX_SYMBOL_ERRS 0x418 /* Error */
++#define BGMAC_RX_PAUSE_PKTS 0x41c
++#define BGMAC_RX_NONPAUSE_PKTS 0x420
++#define BGMAC_RX_SACHANGES 0x424
++#define BGMAC_RX_UNI_PKTS 0x428
++#define BGMAC_UNIMAC_VERSION 0x800
++#define BGMAC_HDBKP_CTL 0x804
++#define BGMAC_CMDCFG 0x808 /* Configuration */
++#define BGMAC_CMDCFG_TE 0x00000001 /* Set to activate TX */
++#define BGMAC_CMDCFG_RE 0x00000002 /* Set to activate RX */
++#define BGMAC_CMDCFG_ES_MASK 0x0000000c /* Ethernet speed see gmac_speed */
++#define BGMAC_CMDCFG_ES_10 0x00000000
++#define BGMAC_CMDCFG_ES_100 0x00000004
++#define BGMAC_CMDCFG_ES_1000 0x00000008
++#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */
++#define BGMAC_CMDCFG_PAD_EN 0x00000020
++#define BGMAC_CMDCFG_CF 0x00000040
++#define BGMAC_CMDCFG_PF 0x00000080
++#define BGMAC_CMDCFG_RPI 0x00000100 /* Unset to enable 802.3x tx flow control */
++#define BGMAC_CMDCFG_TAI 0x00000200
++#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */
++#define BGMAC_CMDCFG_HD_SHIFT 10
++#define BGMAC_CMDCFG_SR 0x00000800 /* Set to reset mode */
++#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */
++#define BGMAC_CMDCFG_AE 0x00400000
++#define BGMAC_CMDCFG_CFE 0x00800000
++#define BGMAC_CMDCFG_NLC 0x01000000
++#define BGMAC_CMDCFG_RL 0x02000000
++#define BGMAC_CMDCFG_RED 0x04000000
++#define BGMAC_CMDCFG_PE 0x08000000
++#define BGMAC_CMDCFG_TPI 0x10000000
++#define BGMAC_CMDCFG_AT 0x20000000
++#define BGMAC_MACADDR_HIGH 0x80c /* High 4 octets of own mac address */
++#define BGMAC_MACADDR_LOW 0x810 /* Low 2 octets of own mac address */
++#define BGMAC_RXMAX_LENGTH 0x814 /* Max receive frame length with vlan tag */
++#define BGMAC_PAUSEQUANTA 0x818
++#define BGMAC_MAC_MODE 0x844
++#define BGMAC_OUTERTAG 0x848
++#define BGMAC_INNERTAG 0x84c
++#define BGMAC_TXIPG 0x85c
++#define BGMAC_PAUSE_CTL 0xb30
++#define BGMAC_TX_FLUSH 0xb34
++#define BGMAC_RX_STATUS 0xb38
++#define BGMAC_TX_STATUS 0xb3c
++
++#define BGMAC_PHY_CTL 0x00
++#define BGMAC_PHY_CTL_SPEED_MSB 0x0040
++#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */
++#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */
++#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */
++#define BGMAC_PHY_CTL_SPEED 0x2000
++#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */
++#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */
++/* Helpers */
++#define BGMAC_PHY_CTL_SPEED_10 0
++#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED
++#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB
++#define BGMAC_PHY_ADV 0x04
++#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */
++#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */
++#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */
++#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */
++#define BGMAC_PHY_ADV2 0x09
++#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */
++#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */
++
++/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */
++#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */
++#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */
++
++/* BCMA GMAC core specific IO status (BCMA_IOST) flags */
++#define BGMAC_BCMA_IOST_ATTACHED 0x00000800
++
++#define BGMAC_NUM_MIB_TX_REGS \
++ (((BGMAC_TX_Q3_OCTETS_HIGH - BGMAC_TX_GOOD_OCTETS) / 4) + 1)
++#define BGMAC_NUM_MIB_RX_REGS \
++ (((BGMAC_RX_UNI_PKTS - BGMAC_RX_GOOD_OCTETS) / 4) + 1)
++
++#define BGMAC_DMA_TX_CTL 0x00
++#define BGMAC_DMA_TX_ENABLE 0x00000001
++#define BGMAC_DMA_TX_SUSPEND 0x00000002
++#define BGMAC_DMA_TX_LOOPBACK 0x00000004
++#define BGMAC_DMA_TX_FLUSH 0x00000010
++#define BGMAC_DMA_TX_PARITY_DISABLE 0x00000800
++#define BGMAC_DMA_TX_ADDREXT_MASK 0x00030000
++#define BGMAC_DMA_TX_ADDREXT_SHIFT 16
++#define BGMAC_DMA_TX_INDEX 0x04
++#define BGMAC_DMA_TX_RINGLO 0x08
++#define BGMAC_DMA_TX_RINGHI 0x0C
++#define BGMAC_DMA_TX_STATUS 0x10
++#define BGMAC_DMA_TX_STATDPTR 0x00001FFF
++#define BGMAC_DMA_TX_STAT 0xF0000000
++#define BGMAC_DMA_TX_STAT_DISABLED 0x00000000
++#define BGMAC_DMA_TX_STAT_ACTIVE 0x10000000
++#define BGMAC_DMA_TX_STAT_IDLEWAIT 0x20000000
++#define BGMAC_DMA_TX_STAT_STOPPED 0x30000000
++#define BGMAC_DMA_TX_STAT_SUSP 0x40000000
++#define BGMAC_DMA_TX_ERROR 0x14
++#define BGMAC_DMA_TX_ERRDPTR 0x0001FFFF
++#define BGMAC_DMA_TX_ERR 0xF0000000
++#define BGMAC_DMA_TX_ERR_NOERR 0x00000000
++#define BGMAC_DMA_TX_ERR_PROT 0x10000000
++#define BGMAC_DMA_TX_ERR_UNDERRUN 0x20000000
++#define BGMAC_DMA_TX_ERR_TRANSFER 0x30000000
++#define BGMAC_DMA_TX_ERR_DESCREAD 0x40000000
++#define BGMAC_DMA_TX_ERR_CORE 0x50000000
++#define BGMAC_DMA_RX_CTL 0x20
++#define BGMAC_DMA_RX_ENABLE 0x00000001
++#define BGMAC_DMA_RX_FRAME_OFFSET_MASK 0x000000FE
++#define BGMAC_DMA_RX_FRAME_OFFSET_SHIFT 1
++#define BGMAC_DMA_RX_DIRECT_FIFO 0x00000100
++#define BGMAC_DMA_RX_OVERFLOW_CONT 0x00000400
++#define BGMAC_DMA_RX_PARITY_DISABLE 0x00000800
++#define BGMAC_DMA_RX_ADDREXT_MASK 0x00030000
++#define BGMAC_DMA_RX_ADDREXT_SHIFT 16
++#define BGMAC_DMA_RX_INDEX 0x24
++#define BGMAC_DMA_RX_RINGLO 0x28
++#define BGMAC_DMA_RX_RINGHI 0x2C
++#define BGMAC_DMA_RX_STATUS 0x30
++#define BGMAC_DMA_RX_STATDPTR 0x00001FFF
++#define BGMAC_DMA_RX_STAT 0xF0000000
++#define BGMAC_DMA_RX_STAT_DISABLED 0x00000000
++#define BGMAC_DMA_RX_STAT_ACTIVE 0x10000000
++#define BGMAC_DMA_RX_STAT_IDLEWAIT 0x20000000
++#define BGMAC_DMA_RX_STAT_STOPPED 0x30000000
++#define BGMAC_DMA_RX_STAT_SUSP 0x40000000
++#define BGMAC_DMA_RX_ERROR 0x34
++#define BGMAC_DMA_RX_ERRDPTR 0x0001FFFF
++#define BGMAC_DMA_RX_ERR 0xF0000000
++#define BGMAC_DMA_RX_ERR_NOERR 0x00000000
++#define BGMAC_DMA_RX_ERR_PROT 0x10000000
++#define BGMAC_DMA_RX_ERR_UNDERRUN 0x20000000
++#define BGMAC_DMA_RX_ERR_TRANSFER 0x30000000
++#define BGMAC_DMA_RX_ERR_DESCREAD 0x40000000
++#define BGMAC_DMA_RX_ERR_CORE 0x50000000
++
++#define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */
++#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */
++#define BGMAC_DESC_CTL0_SOF 0x40000000 /* Start of frame */
++#define BGMAC_DESC_CTL0_EOF 0x80000000 /* End of frame */
++#define BGMAC_DESC_CTL1_LEN 0x00001FFF
++
++#define BGMAC_PHY_NOREGS 0x1E
++#define BGMAC_PHY_MASK 0x1F
++
++#define BGMAC_MAX_TX_RINGS 4
++#define BGMAC_MAX_RX_RINGS 1
++
++#define BGMAC_TX_RING_SLOTS 128
++#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */
++
++#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */
++#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
++#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */
++#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
++
++#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */
++#define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */
++#define BGMAC_BFL_ENETVLAN 0x0100 /* can do vlan */
++
++#define BGMAC_CHIPCTL_1_IF_TYPE_MASK 0x00000030
++#define BGMAC_CHIPCTL_1_IF_TYPE_RMII 0x00000000
++#define BGMAC_CHIPCTL_1_IF_TYPE_MI 0x00000010
++#define BGMAC_CHIPCTL_1_IF_TYPE_RGMII 0x00000020
++#define BGMAC_CHIPCTL_1_SW_TYPE_MASK 0x000000C0
++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000
++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040
++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080
++#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI 0x000000C0
++#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000
++
++#define BGMAC_SPEED_10 0x0001
++#define BGMAC_SPEED_100 0x0002
++#define BGMAC_SPEED_1000 0x0004
++
++struct bgmac_slot_info {
++ struct sk_buff *skb;
++ dma_addr_t dma_addr;
++};
++
++struct bgmac_dma_desc {
++ __le32 ctl0;
++ __le32 ctl1;
++ __le32 addr_low;
++ __le32 addr_high;
++} __packed;
++
++struct bgmac_dma_ring {
++ bool tx;
++ u16 num_slots;
++ u16 start;
++ u16 end;
++
++ u16 mmio_base;
++ void *cpu_base;
++ dma_addr_t dma_base;
++
++ struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS];
++};
++
++struct bgmac_rx_header {
++ __le16 len;
++ __le16 flags;
++ __le16 pad[12];
++};
++
++struct bgmac {
++ struct bcma_device *core;
++ struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */
++ struct net_device *net_dev;
++
++ u8 phyaddr;
++ bool has_robosw;
++
++ u32 int_mask;
++ u32 int_status;
++
++ bool loopback;
++
++ bool autoneg;
++ bool full_duplex;
++ int speed;
++
++ /* DMA */
++ struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];
++ struct bgmac_dma_ring rx_ring[BGMAC_MAX_RX_RINGS];
++
++ /* Stats */
++ bool stats_grabbed;
++ u32 mib_tx_regs[BGMAC_NUM_MIB_TX_REGS];
++ u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS];
++};
++
++static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset)
++{
++ return bcma_read32(bgmac->core, offset);
++}
++
++static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value)
++{
++ bcma_write32(bgmac->core, offset, value);
++}
++
++static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask,
++ u32 set)
++{
++ bgmac_write(bgmac, offset, (bgmac_read(bgmac, offset) & mask) | set);
++}
++
++static inline void bgmac_mask(struct bgmac *bgmac, u16 offset, u32 mask)
++{
++ bgmac_maskset(bgmac, offset, mask, 0);
++}
++
++static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set)
++{
++ bgmac_maskset(bgmac, offset, ~0, set);
++}
++
++u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg);
++void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value);
++
++#endif /* _BGMAC_H */
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -627,4 +627,6 @@ int bcma_nflash_erase(struct bcma_drv_cc
+ int bcma_nflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len, const u8 *buf);
+ #endif
+
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
++
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */