summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/base-files
diff options
context:
space:
mode:
authorJonas Gorski <jogo@openwrt.org>2013-01-23 10:12:40 +0000
committerJonas Gorski <jogo@openwrt.org>2013-01-23 10:12:40 +0000
commit8411e5c06e9db553d4976744751bd15cb0817b30 (patch)
treeb8e22fef30ec120c40bcfa78947ddc324e647201 /target/linux/brcm63xx/base-files
parent17d51121a621082f1cda4a7224afc1915f95d5c6 (diff)
downloadmtk-20170518-8411e5c06e9db553d4976744751bd15cb0817b30.zip
mtk-20170518-8411e5c06e9db553d4976744751bd15cb0817b30.tar.gz
mtk-20170518-8411e5c06e9db553d4976744751bd15cb0817b30.tar.bz2
bcm63xx: switch to b53 and swconfig
Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
Diffstat (limited to 'target/linux/brcm63xx/base-files')
-rwxr-xr-xtarget/linux/brcm63xx/base-files/etc/uci-defaults/02_network78
-rwxr-xr-xtarget/linux/brcm63xx/base-files/lib/brcm63xx.sh2
-rw-r--r--target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx5
-rw-r--r--target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx19
4 files changed, 65 insertions, 39 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 08b8558..106bf5f 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -14,40 +14,88 @@ ucidef_set_interface_loopback
case "$board_name" in
-96328avng |\
-96328A-1241N |\
-96328A-1441N1 |\
-963281TAN |\
-963281T_TEF |\
-96348A-122 |\
+96348W3 |\
96358-502V |\
-CT6373-1 |\
-AW4339U |\
+SPW500V)
+ ucidef_set_interface_lan "eth0"
+ ;;
+
+96338GW |\
+96338W |\
+96338W2_E7T |\
+96348A-122 |\
+96348W3 |\
CPVA642 |\
CT536_CT5621 |\
+CT6373-1 |\
D-4P-W |\
"F@ST2604" |\
-HW556* |\
-NB6 |\
-SPW303V |\
-SPW500V |\
-V2110 |\
-96348W3)
+RTA1320_16M |\
+RTA770BW |\
+V2110)
ucidef_set_interface_lan "eth0"
+ ucidef_add_switch "eth0" "1" "1"
+ ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
+ ;;
+
+96348GW |\
+96348GW-10 |\
+96348GW-11 |\
+96348GW-A |\
+96358VW |\
+96358VW2 |\
+AGPF-S0 |\
+"CPVA502+" |\
+DV201AMR |\
+DWV-S0 |\
+"F@ST2404" |\
+HW553 |\
+MAGIC |\
+RTA1025W_16 |\
+V2500V_BB)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ucidef_add_switch "eth1" "1" "1"
+ ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5"
;;
-AW4139)
+AW4139 |\
+HW556*)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t"
;;
+NB4-* |\
DVG3810BN)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "eth1" "1" "1"
ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5t"
;;
+96328avng |\
+96328A-1241N |\
+96328A-1441N1 |\
+963281TAN |\
+963281T_TEF |\
+96368MVNgr)
+ ucidef_set_interface_lan "eth0.1"
+ ucidef_add_switch "eth0" "1" "1"
+ ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t"
+ ;;
+
+96368MVWG)
+ ucidef_set_interface_lan "eth0.1"
+ ucidef_add_switch "eth0" "1" "1"
+ ucidef_add_switch_vlan "eth0" "1" "1 2 4 5 8t"
+ ;;
+
+NB6)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
+ ucidef_add_switch_vlan "switch0" "2" "0 9t"
+ ;;
+
*)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 999f775..8116e80 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -13,7 +13,7 @@ brcm63xx_has_reset_button=""
brcm63xx_detect() {
board_name=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}' /proc/cpuinfo)
- if [ "$board_name" = "96358VW" ] && [ -e /proc/switch/eth1/enable ]; then
+ if [ "$board_name" = "96358VW" ] && [ -n "$(swconfig dev eth1 help 2>/dev/null)" ]; then
board_name="DVAG3810BN"
fi
diff --git a/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx
index 43da8cc..e1653e3 100644
--- a/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx
+++ b/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx
@@ -1,11 +1,6 @@
#!/bin/sh
failsafe_ip() {
- [ -d "/proc/switch/$ifname" ] && {
- ifconfig "$ifname" 0.0.0.0 down
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports"
- }
-
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
}
diff --git a/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx
index 9d366fa..7655fb7 100644
--- a/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx
+++ b/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx
@@ -16,29 +16,12 @@ preinit_ip_deconfig() {
ifconfig $pi_ifname 0.0.0.0 down
}
fi
- [ -d "/proc/switch/$ifname" ] && {
- echo 1 > "/proc/switch/$ifname/reset"
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports"
- }
-
}
preinit_net_echo() {
preinit_ip
-
- [ -d "/proc/switch/$ifname" ] && {
- echo 1 > "/proc/switch/$ifname/reset"
- # this would be easier if we blasted the message across all ports
- # but we don't want packets leaking across interfaces
- for port in $(seq 0 4); do {
- echo "$port ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports"
- port_net_echo $1
- }; done
-
- echo "0 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports"
-
- } || port_net_echo $1
+ port_net_echo $1
}