summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2011-05-27 09:54:48 +0000
committerFlorian Fainelli <florian@openwrt.org>2011-05-27 09:54:48 +0000
commit590c82cec184555869cb6135ce5a45d978069cfe (patch)
tree6cdd9415f8237a82cddf71651e9a297c3bc21330 /target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch
parent68cb1381543604202516b429aee74133b1d4b11b (diff)
downloadmtk-20170518-590c82cec184555869cb6135ce5a45d978069cfe.zip
mtk-20170518-590c82cec184555869cb6135ce5a45d978069cfe.tar.gz
mtk-20170518-590c82cec184555869cb6135ce5a45d978069cfe.tar.bz2
bcm63xx: Add support for 2.6.38
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27018
Diffstat (limited to 'target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch')
-rw-r--r--target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch129
1 files changed, 129 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch
new file mode 100644
index 0000000..c06fda9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch
@@ -0,0 +1,129 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -432,6 +432,117 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_gw6200 = {
++ .name = "GW6200",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_ohci0 = 1,
++
++ .has_dsp = 1,
++ .dsp = {
++ .gpio_rst = 8, /* FIXME: What is real GPIO here? */
++ .gpio_int = 34,
++ .ext_irq = 2,
++ .cs = 2,
++ },
++
++ .leds = {
++ {
++ .name = "line1",
++ .gpio = 4,
++ .active_low = 1,
++ },
++ {
++ .name = "line2",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ {
++ .name = "line3",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ {
++ .name = "tel",
++ .gpio = 7,
++ .active_low = 1,
++ },
++ {
++ .name = "ethernet",
++ .gpio = 35,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 36,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ },
++};
++
++static struct board_info __initdata board_gw6000 = {
++ .name = "GW6000",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_ohci0 = 1,
++
++ .has_dsp = 1,
++ .dsp = {
++ .gpio_rst = 6,
++ .gpio_int = 34,
++ .ext_irq = 2,
++ .cs = 2,
++ },
++
++ /* GW6000 has no GPIO-controlled leds */
++
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 36,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ },
++};
++
++
++
+ static struct board_info __initdata board_FAST2404 = {
+ .name = "F@ST2404",
+ .expected_cpu_id = 0x6348,
+@@ -1540,6 +1651,8 @@ static const struct board_info __initdat
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ &board_96348r,
+ &board_96348gw,
++ &board_gw6000,
++ &board_gw6200,
+ &board_96348gw_10,
+ &board_96348gw_11,
+ &board_FAST2404,