kernel: remove linux 3.18 support

No targets are using it anymore

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

1 files changed, 0 insertions, 96 deletions

diff --git a/target/linux/generic/pending-3.18/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/pending-3.18/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
deleted file mode 100644
index 4a8f532..0000000
--- a/target/linux/generic/pending-3.18/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
+++ /dev/null
@@ -1,96 +0,0 @@
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -36,6 +36,9 @@
- #define AT803X_INER				0x0012
- #define AT803X_INER_INIT			0xec00
- #define AT803X_INSR				0x0013
-+#define AT803X_REG_CHIP_CONFIG			0x1f
-+#define AT803X_BT_BX_REG_SEL			0x8000
-+#define AT803X_SGMII_ANEG_EN			0x1000
- 
- #define AT803X_PCS_SMART_EEE_CTRL3			0x805D
- #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
-@@ -49,9 +52,10 @@
- #define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
- #define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
- 
--#define ATH8030_PHY_ID 0x004dd076
--#define ATH8031_PHY_ID 0x004dd074
--#define ATH8035_PHY_ID 0x004dd072
-+#define AT803X_PHY_ID_MASK			0xffffffef
-+#define ATH8030_PHY_ID				0x004dd076
-+#define ATH8031_PHY_ID				0x004dd074
-+#define ATH8035_PHY_ID				0x004dd072
- 
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
-@@ -267,6 +271,27 @@ static int at803x_config_init(struct phy
- {
- 	struct at803x_platform_data *pdata;
- 	int ret;
-+	u32 v;
-+
-+	if (phydev->drv->phy_id == ATH8031_PHY_ID &&
-+		phydev->interface == PHY_INTERFACE_MODE_SGMII)
-+	{
-+		v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+		/* select SGMII/fiber page */
-+		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+						v & ~AT803X_BT_BX_REG_SEL);
-+		if (ret)
-+			return ret;
-+		/* enable SGMII autonegotiation */
-+		ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
-+		if (ret)
-+			return ret;
-+		/* select copper page */
-+		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+						v | AT803X_BT_BX_REG_SEL);
-+		if (ret)
-+			return ret;
-+	}
- 
- 	ret = genphy_config_init(phydev);
- 	if (ret < 0)
-@@ -393,7 +418,7 @@ static struct phy_driver at803x_driver[]
- 	/* ATHEROS 8035 */
- 	.phy_id			= ATH8035_PHY_ID,
- 	.name			= "Atheros 8035 ethernet",
--	.phy_id_mask		= 0xffffffef,
-+	.phy_id_mask		= AT803X_PHY_ID_MASK,
- 	.probe			= at803x_probe,
- 	.config_init		= at803x_config_init,
- 	.link_change_notify	= at803x_link_change_notify,
-@@ -412,7 +437,7 @@ static struct phy_driver at803x_driver[]
- 	/* ATHEROS 8030 */
- 	.phy_id			= ATH8030_PHY_ID,
- 	.name			= "Atheros 8030 ethernet",
--	.phy_id_mask		= 0xffffffef,
-+	.phy_id_mask		= AT803X_PHY_ID_MASK,
- 	.probe			= at803x_probe,
- 	.config_init		= at803x_config_init,
- 	.link_change_notify	= at803x_link_change_notify,
-@@ -430,8 +455,8 @@ static struct phy_driver at803x_driver[]
- }, {
- 	/* ATHEROS 8031 */
- 	.phy_id			= ATH8031_PHY_ID,
--	.name			= "Atheros 8031 ethernet",
--	.phy_id_mask		= 0xffffffef,
-+	.name			= "Atheros 8031/8033 ethernet",
-+	.phy_id_mask		= AT803X_PHY_ID_MASK,
- 	.probe			= at803x_probe,
- 	.config_init		= at803x_config_init,
- 	.link_change_notify	= at803x_link_change_notify,
-@@ -465,9 +490,9 @@ module_init(atheros_init);
- module_exit(atheros_exit);
- 
- static struct mdio_device_id __maybe_unused atheros_tbl[] = {
--	{ ATH8030_PHY_ID, 0xffffffef },
--	{ ATH8031_PHY_ID, 0xffffffef },
--	{ ATH8035_PHY_ID, 0xffffffef },
-+	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
-+	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
-+	{ ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
- 	{ }
- };
-