summaryrefslogtreecommitdiff
path: root/target/linux/ipq806x/base-files
diff options
context:
space:
mode:
authorRoman Yeryomin <roman@advem.lv>2017-10-30 01:24:26 +0200
committerJohn Crispin <john@phrozen.org>2017-10-30 01:24:26 +0200
commit156f2df879fd5afbe1aee2e9d37d81e36195a59b (patch)
tree4eca4f07e07752f9dd6633161a939bdd7332e2e9 /target/linux/ipq806x/base-files
parenta22e2bd37db28b084f01a567ef8706fefa0be667 (diff)
downloadmtk-20170518-156f2df879fd5afbe1aee2e9d37d81e36195a59b.zip
mtk-20170518-156f2df879fd5afbe1aee2e9d37d81e36195a59b.tar.gz
mtk-20170518-156f2df879fd5afbe1aee2e9d37d81e36195a59b.tar.bz2
ipq806x: ipq4019: add ap-dk01.1-c1 board support
AP-DK01.1-C1 is QCA dev board with: - ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio - 256MB RAM - 32MB SPI flash - QCA8075 multiport ethernet phy (WAN port, 4x LAN ports) First installation via u-boot: sf probe sf erase 0x180000 0x1a00000 tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin sf write 0x84000000 0x180000 $filesize Further upgrades via sysupgrade. Changes: - add partitions - set memory size to 256MB - add reserved memory mapping - add correct compatible string - add image generation - extract pre-cal data from ART partition Compile and run tested. Wirespeed NAT can be achieved with spreading rx interrupts over different cores. Wifi speed is ~550Mbps @5GHz in open air. Note: AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has ipq4028 instead of ipq4018 on board. Changes since v2: - based on dts(i) rework/cleanup submitted: http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html - precise reserved memory mapping - more precise description - compatible string Signed-off-by: Roman Yeryomin <roman@advem.lv>
Diffstat (limited to 'target/linux/ipq806x/base-files')
-rw-r--r--target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata6
-rw-r--r--target/linux/ipq806x/base-files/lib/ipq806x.sh3
2 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 39757eb..4c5b55b 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -47,6 +47,9 @@ board=$(board_name)
case "$FIRMWARE" in
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
+ ap-dk01.1-c1)
+ ath10kcal_extract "ART" 4096 12064
+ ;;
fritz4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
@@ -54,6 +57,9 @@ case "$FIRMWARE" in
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
+ ap-dk01.1-c1)
+ ath10kcal_extract "ART" 20480 12064
+ ;;
fritz4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh
index e8ff7ea..940c7ef 100644
--- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
+++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
@@ -14,6 +14,9 @@ ipq806x_board_detect() {
machine=$(cat /proc/device-tree/model)
case "$machine" in
+ *"AP-DK01.1-C1")
+ name="ap-dk01.1-c1"
+ ;;
*"AP148")
name="ap148"
;;