diff options
author | John Crispin <john@openwrt.org> | 2012-11-02 20:07:02 +0000 |
---|---|---|
committer | John Crispin <john@openwrt.org> | 2012-11-02 20:07:02 +0000 |
commit | 736835343c20f3ca495b73d2adf24d240f471676 (patch) | |
tree | bbf0787170ac715eaa9f8eabf8317cfe56fc17b3 /target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c | |
parent | fa316620a7bd49e4d08bf1a410da98db54a83327 (diff) | |
download | mtk-20170518-736835343c20f3ca495b73d2adf24d240f471676.zip mtk-20170518-736835343c20f3ca495b73d2adf24d240f471676.tar.gz mtk-20170518-736835343c20f3ca495b73d2adf24d240f471676.tar.bz2 |
move files/ -> files-3.3/
SVN-Revision: 34060
Diffstat (limited to 'target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c')
-rw-r--r-- | target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c | 1040 |
1 files changed, 0 insertions, 1040 deletions
diff --git a/target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c b/target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c deleted file mode 100644 index f97ddb6..0000000 --- a/target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c +++ /dev/null @@ -1,1040 +0,0 @@ -/* - * Lantiq FALC(tm) ON - I2C bus adapter - * - * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> - */ - -/* - * CURRENT ISSUES: - * - no high speed support - * - supports only master mode - * - ten bit mode is not tested (no slave devices) - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/clk.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/gpio.h> - -#include <lantiq_soc.h> - -/* I2C Identification Register */ -/* Module ID */ -#define I2C_ID_ID_MASK 0x0000FF00 -/* field offset */ -#define I2C_ID_ID_OFFSET 8 -/* Revision */ -#define I2C_ID_REV_MASK 0x000000FF -/* field offset */ -#define I2C_ID_REV_OFFSET 0 - -/* I2C Error Interrupt Request Source Status Register */ -/* TXF_OFL */ -#define I2C_ERR_IRQSS_TXF_OFL 0x00000008 -/* TXF_UFL */ -#define I2C_ERR_IRQSS_TXF_UFL 0x00000004 -/* RXF_OFL */ -#define I2C_ERR_IRQSS_RXF_OFL 0x00000002 -/* RXF_UFL */ -#define I2C_ERR_IRQSS_RXF_UFL 0x00000001 - -/* I2C Bus Status Register */ -/* Bus Status */ -#define I2C_BUS_STAT_BS_MASK 0x00000003 -/* I2C Bus is free. */ -#define I2C_BUS_STAT_BS_FREE 0x00000000 -/* - * The device is working as master and has claimed the control - * on the I2C-bus (busy master). - */ -#define I2C_BUS_STAT_BS_BM 0x00000002 - -/* I2C Interrupt Clear Register */ -/* Clear */ -#define I2C_ICR_BREQ_INT_CLR 0x00000008 -/* Clear */ -#define I2C_ICR_LBREQ_INT_CLR 0x00000004 - -/* I2C RUN Control Register */ -/* Enable */ -#define I2C_RUN_CTRL_RUN_EN 0x00000001 - -/* I2C Kernel Clock Control Register */ -/* field offset */ -#define I2C_CLC_RMC_OFFSET 8 -/* Enable */ -#define I2C_IMSC_I2C_P_INT_EN 0x00000020 -/* Enable */ -#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010 -/* Enable */ -#define I2C_IMSC_BREQ_INT_EN 0x00000008 -/* Enable */ -#define I2C_IMSC_LBREQ_INT_EN 0x00000004 - -/* I2C Fractional Divider Configuration Register */ -/* field offset */ -#define I2C_FDIV_CFG_INC_OFFSET 16 -/* field offset */ -#define I2C_FDIV_CFG_DEC_OFFSET 0 - -/* I2C Fractional Divider (highspeed mode) Configuration Register */ -/* field offset */ -#define I2C_FDIV_HIGH_CFG_INC_OFFSET 16 -/* field offset */ -#define I2C_FDIV_HIGH_CFG_DEC_OFFSET 0 - -/* I2C Address Register */ -/* Enable */ -#define I2C_ADDR_CFG_SOPE_EN 0x00200000 -/* Enable */ -#define I2C_ADDR_CFG_SONA_EN 0x00100000 -/* Enable */ -#define I2C_ADDR_CFG_MnS_EN 0x00080000 - -/* I2C Protocol Interrupt Request Source Status Register */ -/* RX */ -#define I2C_P_IRQSS_RX 0x00000040 -/* TX_END */ -#define I2C_P_IRQSS_TX_END 0x00000020 -/* NACK */ -#define I2C_P_IRQSS_NACK 0x00000010 -/* AL */ -#define I2C_P_IRQSS_AL 0x00000008 - -/* I2C Raw Interrupt Status Register */ -/* Read: Interrupt occurred. */ -#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020 -/* Read: Interrupt occurred. */ -#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010 - -/* I2C End Data Control Register */ -/* - * Set End of Transmission - Note: Do not write '1' to this bit when bus is - * free. This will cause an abort after the first byte when a new transfer - * is started. - */ -#define I2C_ENDD_CTRL_SETEND 0x00000002 -/* TX FIFO Flow Control */ -#define I2C_FIFO_CFG_TXFC 0x00020000 -/* RX FIFO Flow Control */ -#define I2C_FIFO_CFG_RXFC 0x00010000 -/* Word aligned (character alignment of four characters) */ -#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000 -/* Word aligned (character alignment of four characters) */ -#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200 -/* 1 word */ -#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000 -/* 1 word */ -#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000 - - -/* I2C register structure */ -struct gpon_reg_i2c { - /* I2C Kernel Clock Control Register */ - unsigned int clc; /* 0x00000000 */ - /* Reserved */ - unsigned int res_0; /* 0x00000004 */ - /* I2C Identification Register */ - unsigned int id; /* 0x00000008 */ - /* Reserved */ - unsigned int res_1; /* 0x0000000C */ - /* - * I2C RUN Control Register - This register enables and disables the I2C - * peripheral. Before enabling, the I2C has to be configured properly. - * After enabling no configuration is possible - */ - unsigned int run_ctrl; /* 0x00000010 */ - /* - * I2C End Data Control Register - This register is used to either turn - * around the data transmission direction or to address another slave - * without sending a stop condition. Also the software can stop the - * slave-transmitter by sending a not-accolade when working as - * master-receiver or even stop data transmission immediately when - * operating as master-transmitter. The writing to the bits of this - * control register is only effective when in MASTER RECEIVES BYTES, - * MASTER TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state - */ - unsigned int endd_ctrl; /* 0x00000014 */ - /* - * I2C Fractional Divider Configuration Register - These register is - * used to program the fractional divider of the I2C bus. Before the - * peripheral is switched on by setting the RUN-bit the two (fixed) - * values for the two operating frequencies are programmed into these - * (configuration) registers. The Register FDIV_HIGH_CFG has the same - * layout as I2C_FDIV_CFG. - */ - unsigned int fdiv_cfg; /* 0x00000018 */ - /* - * I2C Fractional Divider (highspeed mode) Configuration Register - * These register is used to program the fractional divider of the I2C - * bus. Before the peripheral is switched on by setting the RUN-bit the - * two (fixed) values for the two operating frequencies are programmed - * into these (configuration) registers. The Register FDIV_CFG has the - * same layout as I2C_FDIV_CFG. - */ - unsigned int fdiv_high_cfg; /* 0x0000001C */ - /* I2C Address Configuration Register */ - unsigned int addr_cfg; /* 0x00000020 */ - /* - * I2C Bus Status Register - This register gives a status information - * of the I2C. This additional information can be used by the software - * to start proper actions. - */ - unsigned int bus_stat; /* 0x00000024 */ - /* I2C FIFO Configuration Register */ - unsigned int fifo_cfg; /* 0x00000028 */ - /* I2C Maximum Received Packet Size Register */ - unsigned int mrps_ctrl; /* 0x0000002C */ - /* I2C Received Packet Size Status Register */ - unsigned int rps_stat; /* 0x00000030 */ - /* I2C Transmit Packet Size Register */ - unsigned int tps_ctrl; /* 0x00000034 */ - /* I2C Filled FIFO Stages Status Register */ - unsigned int ffs_stat; /* 0x00000038 */ - /* Reserved */ - unsigned int res_2; /* 0x0000003C */ - /* I2C Timing Configuration Register */ - unsigned int tim_cfg; /* 0x00000040 */ - /* Reserved */ - unsigned int res_3[7]; /* 0x00000044 */ - /* I2C Error Interrupt Request Source Mask Register */ - unsigned int err_irqsm; /* 0x00000060 */ - /* I2C Error Interrupt Request Source Status Register */ - unsigned int err_irqss; /* 0x00000064 */ - /* I2C Error Interrupt Request Source Clear Register */ - unsigned int err_irqsc; /* 0x00000068 */ - /* Reserved */ - unsigned int res_4; /* 0x0000006C */ - /* I2C Protocol Interrupt Request Source Mask Register */ - unsigned int p_irqsm; /* 0x00000070 */ - /* I2C Protocol Interrupt Request Source Status Register */ - unsigned int p_irqss; /* 0x00000074 */ - /* I2C Protocol Interrupt Request Source Clear Register */ - unsigned int p_irqsc; /* 0x00000078 */ - /* Reserved */ - unsigned int res_5; /* 0x0000007C */ - /* I2C Raw Interrupt Status Register */ - unsigned int ris; /* 0x00000080 */ - /* I2C Interrupt Mask Control Register */ - unsigned int imsc; /* 0x00000084 */ - /* I2C Masked Interrupt Status Register */ - unsigned int mis; /* 0x00000088 */ - /* I2C Interrupt Clear Register */ - unsigned int icr; /* 0x0000008C */ - /* I2C Interrupt Set Register */ - unsigned int isr; /* 0x00000090 */ - /* I2C DMA Enable Register */ - unsigned int dmae; /* 0x00000094 */ - /* Reserved */ - unsigned int res_6[8154]; /* 0x00000098 */ - /* I2C Transmit Data Register */ - unsigned int txd; /* 0x00008000 */ - /* Reserved */ - unsigned int res_7[4095]; /* 0x00008004 */ - /* I2C Receive Data Register */ - unsigned int rxd; /* 0x0000C000 */ - /* Reserved */ - unsigned int res_8[4095]; /* 0x0000C004 */ -}; - -/* mapping for access macros */ -#define i2c ((struct gpon_reg_i2c *)priv->membase) -#define reg_r32(reg) __raw_readl(reg) -#define reg_w32(val, reg) __raw_writel(val, reg) -#define reg_w32_mask(clear, set, reg) \ - reg_w32((reg_r32(reg) & ~(clear)) | (set), reg) -#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)®)[idx]) -#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)®)[idx]) - -#define i2c_r32(reg) reg_r32(&i2c->reg) -#define i2c_w32(val, reg) reg_w32(val, &i2c->reg) -#define i2c_w32_mask(clear, set, reg) reg_w32_mask(clear, set, &i2c->reg) - -#define DRV_NAME "i2c-falcon" -#define DRV_VERSION "1.01" - -#define FALCON_I2C_BUSY_TIMEOUT 20 /* ms */ - -#ifdef DEBUG -#define FALCON_I2C_XFER_TIMEOUT (25 * HZ) -#else -#define FALCON_I2C_XFER_TIMEOUT HZ -#endif -#if defined(DEBUG) && 0 -#define PRINTK(arg...) pr_info(arg) -#else -#define PRINTK(arg...) do {} while (0) -#endif - -#define FALCON_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \ - I2C_IMSC_I2C_ERR_INT_EN) - -#define FALCON_I2C_ARB_LOST (1 << 0) -#define FALCON_I2C_NACK (1 << 1) -#define FALCON_I2C_RX_UFL (1 << 2) -#define FALCON_I2C_RX_OFL (1 << 3) -#define FALCON_I2C_TX_UFL (1 << 4) -#define FALCON_I2C_TX_OFL (1 << 5) - -struct falcon_i2c { - struct mutex mutex; - - enum { - FALCON_I2C_MODE_100 = 1, - FALCON_I2C_MODE_400 = 2, - FALCON_I2C_MODE_3400 = 3 - } mode; /* current speed mode */ - - struct clk *clk; /* clock input for i2c hardware block */ - struct gpon_reg_i2c __iomem *membase; /* base of mapped registers */ - int irq_lb, irq_b, irq_err, irq_p; /* last burst, burst, error, - protocol IRQs */ - - struct i2c_adapter adap; - struct device *dev; - - struct completion cmd_complete; - - /* message transfer data */ - /* current message */ - struct i2c_msg *current_msg; - /* number of messages to handle */ - int msgs_num; - /* current buffer */ - u8 *msg_buf; - /* remaining length of current buffer */ - u32 msg_buf_len; - /* error status of the current transfer */ - int msg_err; - - /* master status codes */ - enum { - STATUS_IDLE, - STATUS_ADDR, /* address phase */ - STATUS_WRITE, - STATUS_READ, - STATUS_READ_END, - STATUS_STOP - } status; -}; - -static irqreturn_t falcon_i2c_isr(int irq, void *dev_id); - -static inline void enable_burst_irq(struct falcon_i2c *priv) -{ - i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc); -} -static inline void disable_burst_irq(struct falcon_i2c *priv) -{ - i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc); -} - -static void prepare_msg_send_addr(struct falcon_i2c *priv) -{ - struct i2c_msg *msg = priv->current_msg; - int rd = !!(msg->flags & I2C_M_RD); - u16 addr = msg->addr; - - /* new i2c_msg */ - priv->msg_buf = msg->buf; - priv->msg_buf_len = msg->len; - if (rd) - priv->status = STATUS_READ; - else - priv->status = STATUS_WRITE; - - /* send slave address */ - if (msg->flags & I2C_M_TEN) { - i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd); - i2c_w32(addr & 0xff, txd); - } else - i2c_w32((addr & 0x7f) << 1 | rd, txd); -} - -static void set_tx_len(struct falcon_i2c *priv) -{ - struct i2c_msg *msg = priv->current_msg; - int len = (msg->flags & I2C_M_TEN) ? 2 : 1; - - PRINTK("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? ('R') : ('T')); - - priv->status = STATUS_ADDR; - - if (!(msg->flags & I2C_M_RD)) { - len += msg->len; - } else { - /* set maximum received packet size (before rx int!) */ - i2c_w32(msg->len, mrps_ctrl); - } - i2c_w32(len, tps_ctrl); - enable_burst_irq(priv); -} - -static int falcon_i2c_hw_init(struct i2c_adapter *adap) -{ - struct falcon_i2c *priv = i2c_get_adapdata(adap); - - /* disable bus */ - i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); - -#ifndef DEBUG - /* set normal operation clock divider */ - i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc); -#else - /* for debugging a higher divider value! */ - i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc); -#endif - - /* set frequency */ - if (priv->mode == FALCON_I2C_MODE_100) { - dev_dbg(priv->dev, "set standard mode (100 kHz)\n"); - i2c_w32(0, fdiv_high_cfg); - i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) | - (499 << I2C_FDIV_CFG_DEC_OFFSET), - fdiv_cfg); - } else if (priv->mode == FALCON_I2C_MODE_400) { - dev_dbg(priv->dev, "set fast mode (400 kHz)\n"); - i2c_w32(0, fdiv_high_cfg); - i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) | - (124 << I2C_FDIV_CFG_DEC_OFFSET), - fdiv_cfg); - } else if (priv->mode == FALCON_I2C_MODE_3400) { - dev_dbg(priv->dev, "set high mode (3.4 MHz)\n"); - i2c_w32(0, fdiv_cfg); - /* TODO recalculate value for 100MHz input */ - i2c_w32((41 << I2C_FDIV_HIGH_CFG_INC_OFFSET) | - (152 << I2C_FDIV_HIGH_CFG_DEC_OFFSET), - fdiv_high_cfg); - } else { - dev_warn(priv->dev, "unknown mode\n"); - return -ENODEV; - } - - /* configure fifo */ - i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */ - I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */ - I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */ - I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */ - I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */ - I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */ - fifo_cfg); - - /* configure address */ - i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data - in the fifo */ - I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */ - I2C_ADDR_CFG_MnS_EN | /* we are master device */ - 0, /* our slave address (not used!) */ - addr_cfg); - - /* enable bus */ - i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl); - - return 0; -} - -static int falcon_i2c_wait_bus_not_busy(struct falcon_i2c *priv) -{ - int timeout = FALCON_I2C_BUSY_TIMEOUT; - - while ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) - != I2C_BUS_STAT_BS_FREE) { - if (timeout <= 0) { - dev_warn(priv->dev, "timeout waiting for bus ready\n"); - return -ETIMEDOUT; - } - timeout--; - mdelay(1); - } - - return 0; -} - -static void falcon_i2c_tx(struct falcon_i2c *priv, int last) -{ - if (priv->msg_buf_len && priv->msg_buf) { - i2c_w32(*priv->msg_buf, txd); - - if (--priv->msg_buf_len) - priv->msg_buf++; - else - priv->msg_buf = NULL; - } else - last = 1; - - if (last) - disable_burst_irq(priv); -} - -static void falcon_i2c_rx(struct falcon_i2c *priv, int last) -{ - u32 fifo_stat, timeout; - if (priv->msg_buf_len && priv->msg_buf) { - timeout = 5000000; - do { - fifo_stat = i2c_r32(ffs_stat); - } while (!fifo_stat && --timeout); - if (!timeout) { - last = 1; - PRINTK("\nrx timeout\n"); - goto err; - } - while (fifo_stat) { - *priv->msg_buf = i2c_r32(rxd); - if (--priv->msg_buf_len) - priv->msg_buf++; - else { - priv->msg_buf = NULL; - last = 1; - break; - } - #if 0 - fifo_stat = i2c_r32(ffs_stat); - #else - /* do not read more than burst size, otherwise no "last - burst" is generated and the transaction is blocked! */ - fifo_stat = 0; - #endif - } - } else { - last = 1; - } -err: - if (last) { - disable_burst_irq(priv); - - if (priv->status == STATUS_READ_END) { - /* do the STATUS_STOP and complete() here, as sometimes - the tx_end is already seen before this is finished */ - priv->status = STATUS_STOP; - complete(&priv->cmd_complete); - } else { - i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); - priv->status = STATUS_READ_END; - } - } -} - -static void falcon_i2c_xfer_init(struct falcon_i2c *priv) -{ - /* enable interrupts */ - i2c_w32(FALCON_I2C_IMSC_DEFAULT_MASK, imsc); - - /* trigger transfer of first msg */ - set_tx_len(priv); -} - -static void dump_msgs(struct i2c_msg msgs[], int num, int rx) -{ -#if defined(DEBUG) - int i, j; - pr_info("Messages %d %s\n", num, rx ? "out" : "in"); - for (i = 0; i < num; i++) { - pr_info("%2d %cX Msg(%d) addr=0x%X: ", i, - (msgs[i].flags & I2C_M_RD) ? ('R') : ('T'), - msgs[i].len, msgs[i].addr); - if (!(msgs[i].flags & I2C_M_RD) || rx) { - for (j = 0; j < msgs[i].len; j++) - printk("%02X ", msgs[i].buf[j]); - } - printk("\n"); - } -#endif -} - -static void falcon_i2c_release_bus(struct falcon_i2c *priv) -{ - if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM) - i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); -} - -static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], - int num) -{ - struct falcon_i2c *priv = i2c_get_adapdata(adap); - int ret; - - dev_dbg(priv->dev, "xfer %u messages\n", num); - dump_msgs(msgs, num, 0); - - mutex_lock(&priv->mutex); - - INIT_COMPLETION(priv->cmd_complete); - priv->current_msg = msgs; - priv->msgs_num = num; - priv->msg_err = 0; - priv->status = STATUS_IDLE; - - /* wait for the bus to become ready */ - ret = falcon_i2c_wait_bus_not_busy(priv); - if (ret) - goto done; - - while (priv->msgs_num) { - /* start the transfers */ - falcon_i2c_xfer_init(priv); - - /* wait for transfers to complete */ - ret = wait_for_completion_interruptible_timeout( - &priv->cmd_complete, FALCON_I2C_XFER_TIMEOUT); - if (ret == 0) { - dev_err(priv->dev, "controller timed out\n"); - falcon_i2c_hw_init(adap); - ret = -ETIMEDOUT; - goto done; - } else if (ret < 0) - goto done; - - if (priv->msg_err) { - if (priv->msg_err & FALCON_I2C_NACK) - ret = -ENXIO; - else - ret = -EREMOTEIO; - goto done; - } - if (--priv->msgs_num) - priv->current_msg++; - } - /* no error? */ - ret = num; - -done: - falcon_i2c_release_bus(priv); - - mutex_unlock(&priv->mutex); - - if (ret >= 0) - dump_msgs(msgs, num, 1); - - PRINTK("XFER ret %d\n", ret); - return ret; -} - -static irqreturn_t falcon_i2c_isr_burst(int irq, void *dev_id) -{ - struct falcon_i2c *priv = dev_id; - struct i2c_msg *msg = priv->current_msg; - int last = (irq == priv->irq_lb); - - if (last) - PRINTK("LB "); - else - PRINTK("B "); - - if (msg->flags & I2C_M_RD) { - switch (priv->status) { - case STATUS_ADDR: - PRINTK("X"); - prepare_msg_send_addr(priv); - disable_burst_irq(priv); - break; - case STATUS_READ: - case STATUS_READ_END: - PRINTK("R"); - falcon_i2c_rx(priv, last); - break; - default: - disable_burst_irq(priv); - PRINTK("Status R %d\n", priv->status); - break; - } - } else { - switch (priv->status) { - case STATUS_ADDR: - PRINTK("x"); - prepare_msg_send_addr(priv); - break; - case STATUS_WRITE: - PRINTK("w"); - falcon_i2c_tx(priv, last); - break; - default: - disable_burst_irq(priv); - PRINTK("Status W %d\n", priv->status); - break; - } - } - - i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr); - return IRQ_HANDLED; -} - -static void falcon_i2c_isr_prot(struct falcon_i2c *priv) -{ - u32 i_pro = i2c_r32(p_irqss); - - PRINTK("i2c-p"); - - /* not acknowledge */ - if (i_pro & I2C_P_IRQSS_NACK) { - priv->msg_err |= FALCON_I2C_NACK; - PRINTK(" nack"); - } - - /* arbitration lost */ - if (i_pro & I2C_P_IRQSS_AL) { - priv->msg_err |= FALCON_I2C_ARB_LOST; - PRINTK(" arb-lost"); - } - /* tx -> rx switch */ - if (i_pro & I2C_P_IRQSS_RX) - PRINTK(" rx"); - - /* tx end */ - if (i_pro & I2C_P_IRQSS_TX_END) - PRINTK(" txend"); - PRINTK("\n"); - - if (!priv->msg_err) { - /* tx -> rx switch */ - if (i_pro & I2C_P_IRQSS_RX) { - priv->status = STATUS_READ; - enable_burst_irq(priv); - } - if (i_pro & I2C_P_IRQSS_TX_END) { - if (priv->status == STATUS_READ) - priv->status = STATUS_READ_END; - else { - disable_burst_irq(priv); - priv->status = STATUS_STOP; - } - } - } - - i2c_w32(i_pro, p_irqsc); -} - -static irqreturn_t falcon_i2c_isr(int irq, void *dev_id) -{ - u32 i_raw, i_err = 0; - struct falcon_i2c *priv = dev_id; - - i_raw = i2c_r32(mis); - PRINTK("i_raw 0x%08X\n", i_raw); - - /* error interrupt */ - if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) { - i_err = i2c_r32(err_irqss); - PRINTK("i_err 0x%08X bus_stat 0x%04X\n", - i_err, i2c_r32(bus_stat)); - - /* tx fifo overflow (8) */ - if (i_err & I2C_ERR_IRQSS_TXF_OFL) - priv->msg_err |= FALCON_I2C_TX_OFL; - - /* tx fifo underflow (4) */ - if (i_err & I2C_ERR_IRQSS_TXF_UFL) - priv->msg_err |= FALCON_I2C_TX_UFL; - - /* rx fifo overflow (2) */ - if (i_err & I2C_ERR_IRQSS_RXF_OFL) - priv->msg_err |= FALCON_I2C_RX_OFL; - - /* rx fifo underflow (1) */ - if (i_err & I2C_ERR_IRQSS_RXF_UFL) - priv->msg_err |= FALCON_I2C_RX_UFL; - - i2c_w32(i_err, err_irqsc); - } - - /* protocol interrupt */ - if (i_raw & I2C_RIS_I2C_P_INT_INTOCC) - falcon_i2c_isr_prot(priv); - - if ((priv->msg_err) || (priv->status == STATUS_STOP)) - complete(&priv->cmd_complete); - - return IRQ_HANDLED; -} - -static u32 falcon_i2c_functionality(struct i2c_adapter *adap) -{ - return I2C_FUNC_I2C | - I2C_FUNC_10BIT_ADDR | - I2C_FUNC_SMBUS_EMUL; -} - -static struct i2c_algorithm falcon_i2c_algorithm = { - .master_xfer = falcon_i2c_xfer, - .functionality = falcon_i2c_functionality, -}; - -static int __devinit falcon_i2c_probe(struct platform_device *pdev) -{ - int ret = 0; - struct falcon_i2c *priv; - struct i2c_adapter *adap; - struct resource *mmres, *ioarea, - *irqres_lb, *irqres_b, *irqres_err, *irqres_p; - struct clk *clk; - - dev_dbg(&pdev->dev, "probing\n"); - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ, - "i2c_lb"); - irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b"); - irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ, - "i2c_err"); - irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p"); - - if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) { - dev_err(&pdev->dev, "no resources\n"); - return -ENODEV; - } - - clk = clk_get_fpi(); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "failed to get fpi clk\n"); - return -ENOENT; - } - - if (clk_get_rate(clk) != 100000000) { - dev_err(&pdev->dev, "input clock is not 100MHz\n"); - return -ENOENT; - } - clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "failed to get i2c clk\n"); - return -ENOENT; - } - clk_activate(clk); - /* allocate private data */ - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(&pdev->dev, "can't allocate private data\n"); - return -ENOMEM; - } - - adap = &priv->adap; - i2c_set_adapdata(adap, priv); - adap->owner = THIS_MODULE; - adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name)); - adap->algo = &falcon_i2c_algorithm; - - priv->mode = FALCON_I2C_MODE_100; - priv->clk = clk; - priv->dev = &pdev->dev; - - init_completion(&priv->cmd_complete); - mutex_init(&priv->mutex); - - if (ltq_gpio_request(&pdev->dev, 107, 0, 0, DRV_NAME":sda") || - ltq_gpio_request(&pdev->dev, 108, 0, 0, DRV_NAME":scl")) - { - dev_err(&pdev->dev, "I2C gpios not available\n"); - ret = -ENXIO; - goto err_free_priv; - } - - ioarea = request_mem_region(mmres->start, resource_size(mmres), - pdev->name); - - if (ioarea == NULL) { - dev_err(&pdev->dev, "I2C region already claimed\n"); - ret = -ENXIO; - goto err_free_gpio; - } - - /* map memory */ - priv->membase = ioremap_nocache(mmres->start & ~KSEG1, - resource_size(mmres)); - if (priv->membase == NULL) { - ret = -ENOMEM; - goto err_release_region; - } - - priv->irq_lb = irqres_lb->start; - ret = request_irq(priv->irq_lb, falcon_i2c_isr_burst, IRQF_DISABLED, - irqres_lb->name, priv); - if (ret) { - dev_err(&pdev->dev, "can't get last burst IRQ %d\n", - irqres_lb->start); - ret = -ENODEV; - goto err_unmap_mem; - } - - priv->irq_b = irqres_b->start; - ret = request_irq(priv->irq_b, falcon_i2c_isr_burst, IRQF_DISABLED, - irqres_b->name, priv); - if (ret) { - dev_err(&pdev->dev, "can't get burst IRQ %d\n", - irqres_b->start); - ret = -ENODEV; - goto err_free_lb_irq; - } - - priv->irq_err = irqres_err->start; - ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED, - irqres_err->name, priv); - if (ret) { - dev_err(&pdev->dev, "can't get error IRQ %d\n", - irqres_err->start); - ret = -ENODEV; - goto err_free_b_irq; - } - - priv->irq_p = irqres_p->start; - ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED, - irqres_p->name, priv); - if (ret) { - dev_err(&pdev->dev, "can't get protocol IRQ %d\n", - irqres_p->start); - ret = -ENODEV; - goto err_free_err_irq; - } - - dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase); - dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start, - irqres_b->start, irqres_err->start, irqres_p->start); - - /* add our adapter to the i2c stack */ - ret = i2c_add_numbered_adapter(adap); - if (ret) { - dev_err(&pdev->dev, "can't register I2C adapter\n"); - goto err_free_p_irq; - } - - platform_set_drvdata(pdev, priv); - i2c_set_adapdata(adap, priv); - - /* print module version information */ - dev_dbg(&pdev->dev, "module id=%u revision=%u\n", - (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET, - (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET); - - /* initialize HW */ - ret = falcon_i2c_hw_init(adap); - if (ret) { - dev_err(&pdev->dev, "can't configure adapter\n"); - goto err_remove_adapter; - } - - dev_info(&pdev->dev, "version %s\n", DRV_VERSION); - - return 0; - -err_remove_adapter: - i2c_del_adapter(adap); - platform_set_drvdata(pdev, NULL); - -err_free_p_irq: - free_irq(priv->irq_p, priv); - -err_free_err_irq: - free_irq(priv->irq_err, priv); - -err_free_b_irq: - free_irq(priv->irq_b, priv); - -err_free_lb_irq: - free_irq(priv->irq_lb, priv); - -err_unmap_mem: - iounmap(priv->membase); - -err_release_region: - release_mem_region(mmres->start, resource_size(mmres)); - -err_free_gpio: - gpio_free(108); - gpio_free(107); - -err_free_priv: - kfree(priv); - - return ret; -} - -static int __devexit falcon_i2c_remove(struct platform_device *pdev) -{ - struct falcon_i2c *priv = platform_get_drvdata(pdev); - struct resource *mmres; - - /* disable bus */ - i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); - - /* remove driver */ - platform_set_drvdata(pdev, NULL); - i2c_del_adapter(&priv->adap); - - free_irq(priv->irq_lb, priv); - free_irq(priv->irq_b, priv); - free_irq(priv->irq_err, priv); - free_irq(priv->irq_p, priv); - - iounmap(priv->membase); - - gpio_free(108); - gpio_free(107); - - kfree(priv); - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mmres->start, resource_size(mmres)); - - dev_dbg(&pdev->dev, "removed\n"); - - return 0; -} - -static struct platform_driver falcon_i2c_driver = { - .probe = falcon_i2c_probe, - .remove = __devexit_p(falcon_i2c_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init falcon_i2c_init(void) -{ - int ret; - - ret = platform_driver_register(&falcon_i2c_driver); - - if (ret) - pr_debug(DRV_NAME ": can't register platform driver\n"); - - return ret; -} - -static void __exit falcon_i2c_exit(void) -{ - platform_driver_unregister(&falcon_i2c_driver); -} - -module_init(falcon_i2c_init); -module_exit(falcon_i2c_exit); - -MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter"); -MODULE_ALIAS("platform:" DRV_NAME); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); |