mvebu: add linux 4.9 support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

1 files changed, 323 insertions, 0 deletions

diff --git a/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch b/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch
new file mode 100644
index 0000000..8e983cc
--- /dev/null
+++ b/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch
@@ -0,0 +1,323 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 29 Dec 2016 11:03:09 +0000
+Subject: [PATCH] net: phy: add 802.3 clause 45 support to phylib
+
+Add generic helpers for 802.3 clause 45 PHYs for >= 10Gbps support.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ create mode 100644 drivers/net/phy/phy-c45.c
+
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -1,7 +1,7 @@
+ # Makefile for Linux PHY drivers and MDIO bus drivers
+ 
+ libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o \
+-				   phy-core.o
++				   phy-c45.o phy-core.o
+ libphy-$(CONFIG_SWPHY)		+= swphy.o
+ 
+ obj-$(CONFIG_MDIO_BOARDINFO)	+= mdio-boardinfo.o
+--- /dev/null
++++ b/drivers/net/phy/phy-c45.c
+@@ -0,0 +1,234 @@
++/*
++ * Clause 45 PHY support
++ */
++#include <linux/ethtool.h>
++#include <linux/export.h>
++#include <linux/mdio.h>
++#include <linux/mii.h>
++#include <linux/phy.h>
++
++/**
++ * genphy_c45_setup_forced - configures a forced speed
++ * @phydev: target phy_device struct
++ */
++int genphy_c45_pma_setup_forced(struct phy_device *phydev)
++{
++	int ctrl1, ctrl2, ret;
++
++	/* Half duplex is not supported */
++	if (phydev->duplex != DUPLEX_FULL)
++		return -EINVAL;
++
++	ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
++	if (ctrl1 < 0)
++		return ctrl1;
++
++	ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2);
++	if (ctrl2 < 0)
++		return ctrl2;
++
++	ctrl1 &= ~MDIO_CTRL1_SPEEDSEL;
++	/* PMA/PMD type selection is 1.7.5:0 not 1.7.3:0.  See 45.2.1.6.1. */
++	ctrl2 &= ~(MDIO_PMA_CTRL2_TYPE | 0x30);
++
++	switch (phydev->speed) {
++	case SPEED_10:
++		ctrl2 |= MDIO_PMA_CTRL2_10BT;
++		break;
++	case SPEED_100:
++		ctrl1 |= MDIO_PMA_CTRL1_SPEED100;
++		ctrl2 |= MDIO_PMA_CTRL2_100BTX;
++		break;
++	case SPEED_1000:
++		ctrl1 |= MDIO_PMA_CTRL1_SPEED1000;
++		/* Assume 1000base-T */
++		ctrl2 |= MDIO_PMA_CTRL2_1000BT;
++		break;
++	case SPEED_10000:
++		ctrl1 |= MDIO_CTRL1_SPEED10G;
++		/* Assume 10Gbase-T */
++		ctrl2 |= MDIO_PMA_CTRL2_10GBT;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1);
++	if (ret < 0)
++		return ret;
++
++	return phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2);
++}
++EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
++
++/**
++ * genphy_c45_an_disable_aneg - disable auto-negotiation
++ * @phydev: target phy_device struct
++ *
++ * Disable auto-negotiation in the Clause 45 PHY. The link parameters
++ * parameters are controlled through the PMA/PMD MMD registers.
++ *
++ * Returns zero on success, negative errno code on failure.
++ */
++int genphy_c45_an_disable_aneg(struct phy_device *phydev)
++{
++	int val;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
++	if (val < 0)
++		return val;
++
++	val &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
++
++	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
++}
++EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
++
++/**
++ * genphy_c45_restart_aneg - Enable and restart auto-negotiation
++ * @phydev: target phy_device struct
++ *
++ * This assumes that the auto-negotiation MMD is present.
++ *
++ * Enable and restart auto-negotiation.
++ */
++int genphy_c45_restart_aneg(struct phy_device *phydev)
++{
++	int val;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
++	if (val < 0)
++		return val;
++
++	val |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART;
++
++	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
++}
++EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
++
++/**
++ * genphy_c45_aneg_done - return auto-negotiation complete status
++ * @phydev: target phy_device struct
++ *
++ * This assumes that the auto-negotiation MMD is present.
++ *
++ * Reads the status register from the auto-negotiation MMD, returning:
++ * - positive if auto-negotiation is complete
++ * - negative errno code on error
++ * - zero otherwise
++ */
++int genphy_c45_aneg_done(struct phy_device *phydev)
++{
++	int val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
++
++	return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_aneg_done);
++
++/**
++ * genphy_c45_read_link - read the overall link status from the MMDs
++ * @phydev: target phy_device struct
++ * @mmd_mask: MMDs to read status from
++ *
++ * Read the link status from the specified MMDs, and if they all indicate
++ * that the link is up, return positive.  If an error is encountered,
++ * a negative errno will be returned, otherwise zero.
++ */
++int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask)
++{
++	int val, devad;
++	bool link = true;
++
++	while (mmd_mask) {
++		devad = __ffs(mmd_mask);
++		mmd_mask &= ~BIT(devad);
++
++		val = phy_read_mmd(phydev, devad, MDIO_STAT1);
++		if (val < 0)
++			return val;
++
++		/* Read twice because link state is latched and a
++		 * read moves the current state into the register
++		 */
++		val = phy_read_mmd(phydev, devad, MDIO_STAT1);
++		if (val < 0)
++			return val;
++
++		if (!(val & MDIO_STAT1_LSTATUS))
++			link = false;
++	}
++
++	return link;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_read_link);
++
++/**
++ * genphy_c45_read_lpa - read the link partner advertisment and pause
++ * @phydev: target phy_device struct
++ *
++ * Read the Clause 45 defined base (7.19) and 10G (7.33) status registers,
++ * filling in the link partner advertisment, pause and asym_pause members
++ * in @phydev.  This assumes that the auto-negotiation MMD is present, and
++ * the backplane bit (7.48.0) is clear.  Clause 45 PHY drivers are expected
++ * to fill in the remainder of the link partner advert from vendor registers.
++ */
++int genphy_c45_read_lpa(struct phy_device *phydev)
++{
++	int val;
++
++	/* Read the link partner's base page advertisment */
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
++	if (val < 0)
++		return val;
++
++	phydev->lp_advertising = mii_lpa_to_ethtool_lpa_t(val);
++	phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0;
++	phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0;
++
++	/* Read the link partner's 10G advertisment */
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
++	if (val < 0)
++		return val;
++
++	if (val & MDIO_AN_10GBT_STAT_LP10G)
++		phydev->lp_advertising |= ADVERTISED_10000baseT_Full;
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_read_lpa);
++
++/**
++ * genphy_c45_read_pma - read link speed etc from PMA
++ * @phydev: target phy_device struct
++ */
++int genphy_c45_read_pma(struct phy_device *phydev)
++{
++	int val;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
++	if (val < 0)
++		return val;
++
++	switch (val & MDIO_CTRL1_SPEEDSEL) {
++	case 0:
++		phydev->speed = SPEED_10;
++		break;
++	case MDIO_PMA_CTRL1_SPEED100:
++		phydev->speed = SPEED_100;
++		break;
++	case MDIO_PMA_CTRL1_SPEED1000:
++		phydev->speed = SPEED_1000;
++		break;
++	case MDIO_CTRL1_SPEED10G:
++		phydev->speed = SPEED_10000;
++		break;
++	default:
++		phydev->speed = SPEED_UNKNOWN;
++		break;
++	}
++
++	phydev->duplex = DUPLEX_FULL;
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1390,27 +1390,19 @@ EXPORT_SYMBOL(genphy_read_status);
+ 
+ static int gen10g_read_status(struct phy_device *phydev)
+ {
+-	int devad, reg;
+ 	u32 mmd_mask = phydev->c45_ids.devices_in_package;
+-
+-	phydev->link = 1;
++	int ret;
+ 
+ 	/* For now just lie and say it's 10G all the time */
+ 	phydev->speed = SPEED_10000;
+ 	phydev->duplex = DUPLEX_FULL;
+ 
+-	for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) {
+-		if (!(mmd_mask & 1))
+-			continue;
+-
+-		/* Read twice because link state is latched and a
+-		 * read moves the current state into the register
+-		 */
+-		phy_read_mmd(phydev, devad, MDIO_STAT1);
+-		reg = phy_read_mmd(phydev, devad, MDIO_STAT1);
+-		if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+-			phydev->link = 0;
+-	}
++	/* Avoid reading the vendor MMDs */
++	mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2));
++
++	ret = genphy_c45_read_link(phydev, mmd_mask);
++
++	phydev->link = ret > 0 ? 1 : 0;
+ 
+ 	return 0;
+ }
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -807,6 +807,8 @@ static inline const char *phydev_name(co
+ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
+ 	__printf(2, 3);
+ void phy_attached_info(struct phy_device *phydev);
++
++/* Clause 22 PHY */
+ int genphy_config_init(struct phy_device *phydev);
+ int genphy_setup_forced(struct phy_device *phydev);
+ int genphy_restart_aneg(struct phy_device *phydev);
+@@ -817,6 +819,16 @@ int genphy_read_status(struct phy_device
+ int genphy_suspend(struct phy_device *phydev);
+ int genphy_resume(struct phy_device *phydev);
+ int genphy_soft_reset(struct phy_device *phydev);
++
++/* Clause 45 PHY */
++int genphy_c45_restart_aneg(struct phy_device *phydev);
++int genphy_c45_aneg_done(struct phy_device *phydev);
++int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask);
++int genphy_c45_read_lpa(struct phy_device *phydev);
++int genphy_c45_read_pma(struct phy_device *phydev);
++int genphy_c45_pma_setup_forced(struct phy_device *phydev);
++int genphy_c45_an_disable_aneg(struct phy_device *phydev);
++
+ void phy_driver_unregister(struct phy_driver *drv);
+ void phy_drivers_unregister(struct phy_driver *drv, int n);
+ int phy_driver_register(struct phy_driver *new_driver, struct module *owner);