diff options
author | John Crispin <john@openwrt.org> | 2007-12-30 17:38:08 +0000 |
---|---|---|
committer | John Crispin <john@openwrt.org> | 2007-12-30 17:38:08 +0000 |
commit | 42fc624cba0b06ab76cc3c467010ece84ff26ada (patch) | |
tree | 99ef0b8b5ee5085d87851201e1f5c2d202a30ad1 /target/linux/olpc/files/arch/i386/pci/olpc.c | |
parent | 6588e58b880ab04c9fd186b8509e761ca3627887 (diff) | |
download | mtk-20170518-42fc624cba0b06ab76cc3c467010ece84ff26ada.zip mtk-20170518-42fc624cba0b06ab76cc3c467010ece84ff26ada.tar.gz mtk-20170518-42fc624cba0b06ab76cc3c467010ece84ff26ada.tar.bz2 |
cleaning up olpc patch 1
SVN-Revision: 10060
Diffstat (limited to 'target/linux/olpc/files/arch/i386/pci/olpc.c')
-rw-r--r-- | target/linux/olpc/files/arch/i386/pci/olpc.c | 298 |
1 files changed, 298 insertions, 0 deletions
diff --git a/target/linux/olpc/files/arch/i386/pci/olpc.c b/target/linux/olpc/files/arch/i386/pci/olpc.c new file mode 100644 index 0000000..1518d25 --- /dev/null +++ b/target/linux/olpc/files/arch/i386/pci/olpc.c @@ -0,0 +1,298 @@ +/* + * olpcpci.c - Low-level PCI config space access for OLPC systems + * without the VSA PCI virtualization software. + * + * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device) + * has some I/O functions (display, southbridge, sound, USB HCIs, etc) + * that more or less behave like PCI devices, but the hardware doesn't + * directly implement the PCI configuration space headers. AMD provides + * "VSA" (Virtual System Architecture) software that emulates PCI config + * space for these devices, by trapping I/O accesses to PCI config register + * (CF8/CFC) and running some code in System Management Mode interrupt state. + * On the OLPC platform, we don't want to use that VSA code because + * (a) it slows down suspend/resume, and (b) recompiling it requires special + * compilers that are hard to get. So instead of letting the complex VSA + * code simulate the PCI config registers for the on-chip devices, we + * just simulate them the easy way, by inserting the code into the + * pci_write_config and pci_read_config path. Most of the config registers + * are read-only anyway, so the bulk of the simulation is just table lookup. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <asm/olpc.h> +#include <asm/geode.h> +#include "pci.h" + +static int is_lx; + +/* + * In the tables below, the first two line (8 longwords) are the + * size masks that are used when the higher level PCI code determines + * the size of the region by writing ~0 to a base address register + * and reading back the result. + * + * The following lines are the values that are read during normal + * PCI config access cycles, i.e. not after just having written + * ~0 to a base address register. + */ + +static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */ + 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */ + 0x0 , 0x0 , 0x0 , 0x28100b , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ + 0xfffffffd , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */ + 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */ + 0x0 , 0x0 , 0x0 , 0x28100b , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ + 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */ + 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ + 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */ + 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ + 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */ + 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ + 0x0 , 0x0 , 0x0 , 0x30100b , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */ + 0xffffc000 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */ + 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */ + 0x0 , 0x0 , 0x0 , 0x20821022 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + + +static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */ + 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 , + 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 , + + 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 , + 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */ + 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */ + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */ + 0xffffff81 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 , + 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */ + 0x0 , 0x0 , 0x0 , 0x20931022 , + 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */ + 0xfffff000 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20941022 , 0x2300006 , 0xc031002 , 0x0 , + 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ + 0x0 , 0x0 , 0x0 , 0x20941022 , + 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ + 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */ + 0xfffff000 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20951022 , 0x2300006 , 0xc032002 , 0x0 , + 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ + 0x0 , 0x0 , 0x0 , 0x20951022 , + 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ + 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ +#if 0 + 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ +#endif + 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ + 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */ +}; + +static u32 ff_loc = ~0; +static u32 zero_loc = 0; + +static int bar_probing = 0; /* Set after a write of ~0 to a BAR */ + +#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */ +#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */ +#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT))) + +static u32 *hdr_addr(const u32 *hdr, int reg) +{ + u32 addr; + + /* + * This is a little bit tricky. The header maps consist of + * 0x20 bytes of size masks, followed by 0x70 bytes of header data. + * In the normal case, when not probing a BAR's size, we want + * to access the header data, so we add 0x20 to the reg offset, + * thus skipping the size mask area. + * In the BAR probing case, we want to access the size mask for + * the BAR, so we subtract 0x10 (the config header offset for + * BAR0), and don't skip the size mask area. + */ + + addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20); + + bar_probing = 0; + return (u32 *)addr; +} + +static int pci_olpc_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + u32 *addr; + + /* Use the hardware mechanism for non-simulated devices */ + if (!SIMULATED(bus, devfn)) + return pci_conf1_read(seg, bus, devfn, reg, len, value); + + /* + * No device has config registers past 0x70, so we save table space + * by not storing entries for the nonexistent registers + */ + if (reg >= 0x70) + addr = &zero_loc; + else { + switch (devfn) { + case 0x8: + addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg); + break; + case 0x9: + addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg); + break; + case 0xa: + addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc; + break; + case 0x78: + addr = hdr_addr(isa_hdr, reg); + break; + case 0x7b: + addr = hdr_addr(ac97_hdr, reg); + break; + case 0x7c: + addr = hdr_addr(ohci_hdr, reg); + break; + case 0x7d: + addr = hdr_addr(ehci_hdr, reg); + break; + default: + addr = &ff_loc; + break; + } + } + switch (len) { + case 1: + *value = *(u8 *) addr; + break; + case 2: + *value = *(u16 *) addr; + break; + case 4: + *value = *addr; + break; + default: + BUG(); + } + + return 0; +} + +static int pci_olpc_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + /* Use the hardware mechanism for non-simulated devices */ + if (!SIMULATED(bus, devfn)) + return pci_conf1_write(seg, bus, devfn, reg, len, value); + + /* XXX we may want to extend this to simulate EHCI power management */ + + /* + * Mostly we just discard writes, but if the write is a size probe + * (i.e. writing ~0 to a BAR), we remember it and arrange to return + * the appropriate size mask on the next read. This is cheating + * to some extent, because it depends on the fact that the next + * access after such a write will always be a read to the same BAR. + */ + + if ((reg >= 0x10) && (reg < 0x2c)) { + /* Write is to a BAR */ + if (value == ~0) + bar_probing = 1; + } else { + /* + * No warning on writes to ROM BAR, CMD, LATENCY_TIMER, + * CACHE_LINE_SIZE, or PM registers. + */ + if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) && + (reg != 0x0c) && (reg != 0x44)) + printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value); + } + + return 0; +} + +static struct pci_raw_ops pci_olpc_conf = { + .read = pci_olpc_read, + .write = pci_olpc_write, +}; + +void __init pci_olpc_init(void) +{ + if (!machine_is_olpc() || olpc_has_vsa()) + return; + + printk(KERN_INFO "PCI: Using configuration type OLPC\n"); + raw_pci_ops = &pci_olpc_conf; + is_lx = is_geode_lx(); +} |