summaryrefslogtreecommitdiff
path: root/target/linux/orion
diff options
context:
space:
mode:
authorRod Whitby <rod@whitby.id.au>2009-03-22 12:38:24 +0000
committerRod Whitby <rod@whitby.id.au>2009-03-22 12:38:24 +0000
commitf11f903b616c48cd22ee183fc11ca3173ef01502 (patch)
tree79bd424285736dd4a2f9d1ffa06f25da009e6a89 /target/linux/orion
parente6b22c5fe28c625f8bf2f8cdf899165320a3d570 (diff)
downloadmtk-20170518-f11f903b616c48cd22ee183fc11ca3173ef01502.zip
mtk-20170518-f11f903b616c48cd22ee183fc11ca3173ef01502.tar.gz
mtk-20170518-f11f903b616c48cd22ee183fc11ca3173ef01502.tar.bz2
orion: Added initial support for Freecom DT2. Thanks to Zintis.
SVN-Revision: 14963
Diffstat (limited to 'target/linux/orion')
-rw-r--r--target/linux/orion/config-default1
-rwxr-xr-xtarget/linux/orion/files/arch/arm/mach-orion5x/dt2-common.h82
-rw-r--r--target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c445
-rw-r--r--target/linux/orion/image/Makefile18
-rw-r--r--target/linux/orion/patches/200-dt2_board_support.patch26
5 files changed, 572 insertions, 0 deletions
diff --git a/target/linux/orion/config-default b/target/linux/orion/config-default
index b0971cd..ba6fb2e 100644
--- a/target/linux/orion/config-default
+++ b/target/linux/orion/config-default
@@ -176,6 +176,7 @@ CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_MACH_DB88F5281 is not set
# CONFIG_MACH_DNS323 is not set
+CONFIG_MACH_DT2=y
# CONFIG_MACH_EDMINI_V2 is not set
# CONFIG_MACH_KUROBOX_PRO is not set
# CONFIG_MACH_LINKSTATION_MINI is not set
diff --git a/target/linux/orion/files/arch/arm/mach-orion5x/dt2-common.h b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-common.h
new file mode 100755
index 0000000..a54e188
--- /dev/null
+++ b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-common.h
@@ -0,0 +1,82 @@
+#ifndef __INC_DT2_COMMON_H
+#define __INC_DT2_COMMON_H
+
+#define ATAG_MV_UBOOT 0x41000403
+
+struct tag_mv_uboot {
+ u32 uboot_version;
+ u32 tclk;
+ u32 sysclk;
+ u32 isUsbHost;
+ u32 overEthAddr;
+ u8 dt2_eeprom[256];
+};
+
+#define DT2_EEPROM_ADDR 0x50
+#define DT2_EEPROM_OFFSET 0
+#define DT2_EEPROM_LENGTH 256
+
+#define DT2_SERIAL_NUMBER_DEFAULT "run on default\0"
+#define DT2_REVISION_DEFAULT_INIT 0xFF
+#define DT2_CONFIG_FLAGS_DEFAULT 0x00
+
+#define _PACKED_ __attribute__((packed))
+
+struct DT2_EEPROM_SD_CONFIG {
+ unsigned int ram_1;
+ unsigned int ram_2;
+ unsigned int ram_3;
+ unsigned int ram_4;
+ unsigned char ram_5;
+ unsigned char ram_6;
+ unsigned short ram_7;
+ unsigned int magic_id;
+ } _PACKED_; // 24 Bytes in total
+
+struct DT2_EEPROM_FC_CONFIG {
+ unsigned char rtc_sts_mask;
+ unsigned char rtc_sts_init;
+ unsigned char rtc_int_mask;
+ unsigned char rtc_int_init;
+ unsigned char rtc_atrim_init;
+ unsigned char rtc_dtrim_init;
+ unsigned char dummy1;
+ unsigned char dummy2;
+ unsigned char dt2_config_flags; /* 0x80 to load rtc_values to RTC */
+ unsigned char dt2_revision; /* upper nibble is HW, lower nibble is FW */
+ unsigned char dt2_serial_number[16]; /* Serial number of DT-2 */
+ } _PACKED_; // 26 Bytes in total
+
+#define CFG_LOAD_RTC_VALUES 0x80
+
+struct DT2_EEPROM_GW_CONFIG {
+ unsigned int dummy1;
+ unsigned int dummy2;
+ unsigned int dummy3;
+ unsigned char dummy4;
+ unsigned char tos_video_val1;
+ unsigned char tos_video_val2;
+ unsigned char tos_voip_val;
+ unsigned char qos_igmp_cfg;
+ unsigned char num_of_ifs;
+ unsigned short vlan_ports_if[3];
+ unsigned char mac_addr[3][6];
+ } _PACKED_; // 42 Bytes in total
+
+#define _SIZE_OF_ALL_STRUCTS_ (sizeof(struct DT2_EEPROM_SD_CONFIG) + sizeof(struct DT2_EEPROM_FC_CONFIG) + sizeof(struct DT2_EEPROM_GW_CONFIG))
+
+// MV = EEPROM - SD - FC - GW - CRC
+struct DT2_EEPROM_MV_CONFIG {
+ unsigned int reg_addr[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)];
+ unsigned int reg_data[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)];
+ } _PACKED_;
+
+struct DT2_EEPROM_STRUCT {
+ struct DT2_EEPROM_MV_CONFIG mv;
+ struct DT2_EEPROM_SD_CONFIG sd;
+ struct DT2_EEPROM_FC_CONFIG fc;
+ struct DT2_EEPROM_GW_CONFIG gw;
+ unsigned int crc;
+ } _PACKED_;
+
+#endif
diff --git a/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
new file mode 100644
index 0000000..f794b4c
--- /dev/null
+++ b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
@@ -0,0 +1,445 @@
+/*
+ * arch/arm/mach-orion5x/dt2-setup.c
+ *
+ * Freecom DataTank Gateway Setup
+ *
+ * Copyright (C) 2009 Zintis Petersons <Zintis.Petersons@abcsolutions.lv>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <net/dsa.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * DT2 local
+ ****************************************************************************/
+#include <asm/setup.h>
+#include "dt2-common.h"
+
+u32 mvUbootVer = 0;
+u32 mvTclk = 166666667;
+u32 mvSysclk = 200000000;
+u32 mvIsUsbHost = 1;
+u32 overEthAddr = 0;
+u32 gBoardId = -1;
+struct DT2_EEPROM_STRUCT dt2_eeprom;
+
+/*****************************************************************************
+ * DT2 Info
+ ****************************************************************************/
+/*
+ * PCI
+ */
+
+#define DT2_PCI_SLOT0_OFFS 7
+#define DT2_PCI_SLOT0_IRQ_A_PIN 3
+#define DT2_PCI_SLOT0_IRQ_B_PIN 2
+
+#define DT2_PIN_GPIO_SYNC 25
+#define DT2_PIN_GPIO_POWER 24
+#define DT2_PIN_GPIO_UNPLUG1 23
+#define DT2_PIN_GPIO_UNPLUG2 22
+#define DT2_PIN_GPIO_RESET 4
+
+#define DT2_NOR_BOOT_BASE 0xf4000000
+#define DT2_NOR_BOOT_SIZE SZ_512K
+
+#define DT2_LEDS_BASE 0xfa000000
+#define DT2_LEDS_SIZE SZ_1K
+
+/*****************************************************************************
+ * 512K NOR Flash on Device bus Boot CS
+ ****************************************************************************/
+
+static struct mtd_partition dt2_partitions[] = {
+ {
+ .name = "u-boot",
+ .size = 0x00080000,
+ .offset = 0,
+ },
+};
+
+static struct physmap_flash_data dt2_nor_flash_data = {
+ .width = 1, /* 8 bit bus width */
+ .parts = dt2_partitions,
+ .nr_parts = ARRAY_SIZE(dt2_partitions)
+};
+
+static struct resource dt2_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DT2_NOR_BOOT_BASE,
+ .end = DT2_NOR_BOOT_BASE + DT2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device dt2_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &dt2_nor_flash_data,
+ },
+ .resource = &dt2_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init dt2_pci_preinit(void)
+{
+ int pin, irq;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = DT2_PCI_SLOT0_IRQ_A_PIN;
+ if (gpio_request(pin, "PCI IntA") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq = gpio_to_irq(pin);
+ set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+ printk (KERN_INFO "PCI IntA IRQ: %d\n", irq);
+ } else {
+ printk(KERN_ERR "dt2_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "dt2_pci_preinit failed to request gpio %d\n", pin);
+ }
+
+ pin = DT2_PCI_SLOT0_IRQ_B_PIN;
+ if (gpio_request(pin, "PCI IntB") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq = gpio_to_irq(pin);
+ set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+ printk (KERN_INFO "PCI IntB IRQ: %d\n", irq);
+ } else {
+ printk(KERN_ERR "dt2_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "dt2_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init dt2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1){
+ printk(KERN_INFO "orion5x_pci_map_irq: %d\n", irq);
+ return irq;
+ }
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - DT2_PCI_SLOT0_OFFS) {
+ case 0:
+ if (pin == 1){
+ irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_A_PIN);
+ printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_A_PIN: %d\n", irq);
+ }
+ else {
+ irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_B_PIN);
+ printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_B_PIN: %d\n", irq);
+ }
+ default:
+ irq = -1;
+ printk(KERN_INFO "dt2_pci_map_irq IRQ: %d\n", irq);
+ }
+
+ return irq;
+}
+
+static struct hw_pci dt2_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = dt2_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = dt2_pci_map_irq,
+};
+
+static int __init dt2_pci_init(void)
+{
+ if (machine_is_dt2())
+ pci_common_init(&dt2_pci);
+
+ return 0;
+}
+
+subsys_initcall(dt2_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data dt2_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct dsa_platform_data dt2_switch_data = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "cpu",
+ .port_names[4] = "lan3",
+ .port_names[5] = "lan4",
+};
+
+/*****************************************************************************
+ * RTC ISL1208 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata dt2_i2c_rtc = {
+ I2C_BOARD_INFO("isl1208", 0x6F),
+};
+
+/*****************************************************************************
+ * Sata
+ ****************************************************************************/
+static struct mv_sata_platform_data dt2_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode dt2_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, // RTC interrupt
+ { 1, MPP_GPIO }, // 88e6131 interrupt
+ { 2, MPP_GPIO }, // PCI_intB
+ { 3, MPP_GPIO }, // PCI_intA
+ { 4, MPP_GPIO }, // reset button switch
+ { 5, MPP_GPIO },
+ { 6, MPP_GPIO },
+ { 7, MPP_GPIO },
+ { 8, MPP_GPIO },
+ { 9, MPP_GIGE }, /* GE_RXERR */
+ { 10, MPP_GPIO }, // usb
+ { 11, MPP_GPIO }, // usb
+ { 12, MPP_GIGE }, // GE_TXD[4]
+ { 13, MPP_GIGE }, // GE_TXD[5]
+ { 14, MPP_GIGE }, // GE_TXD[6]
+ { 15, MPP_GIGE }, // GE_TXD[7]
+ { 16, MPP_GIGE }, // GE_RXD[4]
+ { 17, MPP_GIGE }, // GE_RXD[5]
+ { 18, MPP_GIGE }, // GE_RXD[6]
+ { 19, MPP_GIGE }, // GE_RXD[7]
+ { -1 },
+};
+
+/*****************************************************************************
+ * LEDS
+ ****************************************************************************/
+static struct platform_device dt2_leds = {
+ .name = "dt2-led",
+ .id = -1,
+};
+
+/****************************************************************************
+ * GPIO key
+ ****************************************************************************/
+static irqreturn_t dt2_reset_handler(int irq, void *dev_id)
+{
+ /* This is the paper-clip reset which does an emergency reboot. */
+ printk(KERN_INFO "Restarting system.\n");
+ machine_restart(NULL);
+
+ /* This should never be reached. */
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dt2_power_handler(int irq, void *dev_id)
+{
+ printk(KERN_INFO "Shutting down system.\n");
+ machine_power_off();
+ return IRQ_HANDLED;
+}
+
+static void __init dt2_init(void)
+{
+ DECLARE_MAC_BUF(mac_buf);
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(dt2_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ gpio_display();
+
+ orion5x_uart0_init();
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_i2c_init();
+ orion5x_sata_init(&dt2_sata_data);
+ orion5x_xor_init();
+
+ printk(KERN_INFO "U-Boot parameters:\n");
+ printk(KERN_INFO "Sys Clk = %d, Tclk = %d, BoardID = 0x%02x\n", mvSysclk, mvTclk, gBoardId);
+
+ printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number);
+ printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision);
+ printk(KERN_INFO "DT2: Using MAC address %s for port 0\n",
+ print_mac(mac_buf, dt2_eeprom.gw.mac_addr[0]));
+ printk(KERN_INFO "DT2: Using MAC address %s for port 1\n",
+ print_mac(mac_buf, dt2_eeprom.gw.mac_addr[1]));
+
+ orion5x_eth_init(&dt2_eth_data);
+ memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6);
+ orion5x_eth_switch_init(&dt2_switch_data, NO_IRQ);
+
+ i2c_register_board_info(0, &dt2_i2c_rtc, 1);
+
+ orion5x_setup_dev_boot_win(DT2_NOR_BOOT_BASE, DT2_NOR_BOOT_SIZE);
+ platform_device_register(&dt2_nor_flash);
+
+ orion5x_setup_dev0_win(DT2_LEDS_BASE, DT2_LEDS_SIZE);
+ platform_device_register(&dt2_leds);
+
+ if (request_irq(gpio_to_irq(DT2_PIN_GPIO_RESET), &dt2_reset_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "DT2: Reset button", NULL) < 0) {
+
+ printk("DT2: Reset Button IRQ %d not available\n",
+ gpio_to_irq(DT2_PIN_GPIO_RESET));
+ }
+
+ if (request_irq(gpio_to_irq(DT2_PIN_GPIO_POWER), &dt2_power_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "DT2: Power button", NULL) < 0) {
+
+ printk(KERN_DEBUG "DT2: Power Button IRQ %d not available\n",
+ gpio_to_irq(DT2_PIN_GPIO_POWER));
+ }
+}
+
+static int __init parse_tag_dt2_uboot(const struct tag *t)
+{
+ struct tag_mv_uboot *mv_uboot;
+
+ // Get pointer to our block
+ mv_uboot = (struct tag_mv_uboot*)&t->u;
+ mvTclk = mv_uboot->tclk;
+ mvSysclk = mv_uboot->sysclk;
+ mvUbootVer = mv_uboot->uboot_version;
+ mvIsUsbHost = mv_uboot->isUsbHost;
+
+ // Some clock fixups
+ if(mvTclk == 166000000) mvTclk = 166666667;
+ else if(mvTclk == 133000000) mvTclk = 133333333;
+ else if(mvSysclk == 166000000) mvSysclk = 166666667;
+
+ gBoardId = (mvUbootVer & 0xff);
+
+ //DT2 specific data
+ memcpy(&dt2_eeprom, mv_uboot->dt2_eeprom, sizeof(struct DT2_EEPROM_STRUCT));
+
+ return 0;
+}
+__tagtable(ATAG_MV_UBOOT, parse_tag_dt2_uboot);
+
+/*
+ * This is OpenWrt specific fixup. It includes code from original "tag_fixup_mem32" to
+ * fixup bogus memory tags and also fixes kernel cmdline by adding " init=/etc/preinit"
+ * at the end. It is important to flash OpenWrt image from original Freecom firmware.
+ *
+ * Vanilla kernel should use "tag_fixup_mem32" function.
+ */
+void __init openwrt_fixup(struct machine_desc *mdesc, struct tag *t,
+ char **from, struct meminfo *meminfo)
+{
+ char *p = NULL;
+ static char openwrt_init_tag[] __initdata = " init=/etc/preinit";
+
+ for (; t->hdr.size; t = tag_next(t)){
+ /* Locate the Freecom cmdline */
+ if (t->hdr.tag == ATAG_CMDLINE) {
+ p = t->u.cmdline.cmdline;
+ printk("%s(%d): Found cmdline '%s' at 0x%0lx\n",
+ __FUNCTION__, __LINE__, p, (unsigned long)p);
+ }
+ /*
+ * Many orion-based systems have buggy bootloader implementations.
+ * This is a common fixup for bogus memory tags.
+ */
+ if (t->hdr.tag == ATAG_MEM &&
+ (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
+ t->u.mem.start & ~PAGE_MASK)) {
+ printk(KERN_WARNING
+ "Clearing invalid memory bank %dKB@0x%08x\n",
+ t->u.mem.size / 1024, t->u.mem.start);
+ t->hdr.tag = 0;
+ }
+ }
+
+ printk("%s(%d): End of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t);
+
+ /* Overwrite the end of the table with a new cmdline tag. */
+ t->hdr.tag = ATAG_CMDLINE;
+ t->hdr.size =
+ (sizeof (struct tag_header) +
+ strlen(p) + strlen(openwrt_init_tag) + 1 + 4) >> 2;
+
+ strlcpy(t->u.cmdline.cmdline, p, COMMAND_LINE_SIZE);
+ strlcpy(t->u.cmdline.cmdline + strlen(p), openwrt_init_tag,
+ COMMAND_LINE_SIZE - strlen(p));
+
+ printk("%s(%d): New cmdline '%s' at 0x%0lx\n",
+ __FUNCTION__, __LINE__,
+ t->u.cmdline.cmdline, (unsigned long)t->u.cmdline.cmdline);
+
+ t = tag_next(t);
+
+ printk("%s(%d): New end of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t);
+
+ t->hdr.tag = ATAG_NONE;
+ t->hdr.size = 0;
+}
+
+/* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */
+MACHINE_START(DT2, "Freecom DataTank Gateway")
+ /* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = dt2_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = openwrt_fixup, //tag_fixup_mem32,
+MACHINE_END
diff --git a/target/linux/orion/image/Makefile b/target/linux/orion/image/Makefile
index 0ca3767..66edc04 100644
--- a/target/linux/orion/image/Makefile
+++ b/target/linux/orion/image/Makefile
@@ -26,6 +26,13 @@ define Image/BuildKernel
-C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
-d $(KDIR)/wnr854t-zImage $(KDIR)/wnr854t-uImage
cp $(KDIR)/wnr854t-uImage $(BIN_DIR)/openwrt-wnr854t-uImage
+# DT2: mach id 1514 (0x5EA)
+ echo -en "\x05\x1c\xa0\xe3\xea\x10\x81\xe3" > $(KDIR)/dt2-zImage
+ cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/dt2-zImage
+ $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
+ -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
+ -d $(KDIR)/dt2-zImage $(KDIR)/dt2-uImage
+ cp $(KDIR)/dt2-uImage $(BIN_DIR)/openwrt-dt2-uImage
endef
define Image/Build/Netgear
@@ -44,10 +51,21 @@ define Image/Build/Linksys
# placeholder for the WRT350N v2
endef
+define Image/Build/Freecom
+ $(INSTALL_DIR) $(TARGET_DIR)/boot
+ # TODO: Add special CMDLINE shim for webupgrade image here
+ $(CP) $(KDIR)/dt2-uImage $(TARGET_DIR)/boot/uImage
+ rm -rf $(TARGET_DIR)/{var,jffs,rom}
+ $(INSTALL_DIR) $(TARGET_DIR)/var
+ $(TAR) cfj $(BIN_DIR)/openwrt-$(2)-$(1).img --owner=root --group=root -C $(TARGET_DIR)/ .
+ $(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img $(3)
+endef
+
define Image/Build
$(call Image/Build/$(1),$(1))
$(call Image/Build/Netgear,$(1),wnr854t,NG_WNR854T,$(1))
$(call Image/Build/Linksys,$(1),wrt350nv2,WNR350Nv2,$(1))
+ $(call Image/Build/Freecom,$(1),dt2,DT,$(1))
endef
define Image/Build/squashfs
diff --git a/target/linux/orion/patches/200-dt2_board_support.patch b/target/linux/orion/patches/200-dt2_board_support.patch
new file mode 100644
index 0000000..bf82ed7
--- /dev/null
+++ b/target/linux/orion/patches/200-dt2_board_support.patch
@@ -0,0 +1,26 @@
+diff -ruN linux-2.6.28.5.orig/arch/arm/mach-orion5x/Kconfig linux-2.6.28.5/arch/arm/mach-orion5x/Kconfig
+--- linux-2.6.28.5.orig/arch/arm/mach-orion5x/Kconfig 2009-02-21 00:41:27.000000000 +0200
++++ linux-2.6.28.5/arch/arm/mach-orion5x/Kconfig 2009-02-28 10:06:24.000000000 +0200
+@@ -16,6 +16,13 @@
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-NAS (88F5182) RD2
+
++config MACH_DT2
++ bool "Freecom DataTank Gateway"
++ select I2C_BOARDINFO
++ help
++ Say 'Y' here if you want your kernel to support the
++ Freecom DataTank Gateway
++
+ config MACH_KUROBOX_PRO
+ bool "KuroBox Pro"
+ select I2C_BOARDINFO
+diff -ruN linux-2.6.28.5.orig/arch/arm/mach-orion5x/Makefile linux-2.6.28.5/arch/arm/mach-orion5x/Makefile
+--- linux-2.6.28.5.orig/arch/arm/mach-orion5x/Makefile 2009-02-21 00:41:27.000000000 +0200
++++ linux-2.6.28.5/arch/arm/mach-orion5x/Makefile 2009-02-28 10:07:35.000000000 +0200
+@@ -17,3 +17,4 @@
+ obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
+ obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
+ obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
++obj-$(CONFIG_MACH_DT2) += dt2-setup.o
+