move files to files-3.7

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36161

1 files changed, 0 insertions, 88 deletions

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/setup.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/setup.c
deleted file mode 100644
index 5a069db..0000000
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/setup.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Ralink RT305x SoC specific setup
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/mips_machine.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt305x.h>
-#include <asm/mach-ralink/rt305x_regs.h>
-#include "common.h"
-
-static void rt305x_restart(char *command)
-{
-	rt305x_sysc_wr(RT305X_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
-	while (1)
-		if (cpu_wait)
-			cpu_wait();
-}
-
-static void rt305x_halt(void)
-{
-	while (1)
-		if (cpu_wait)
-			cpu_wait();
-}
-
-unsigned int __cpuinit get_c0_compare_irq(void)
-{
-	return CP0_LEGACY_COMPARE_IRQ;
-}
-
-void __init ramips_soc_setup(void)
-{
-	struct clk *clk;
-
-	rt305x_sysc_base = ioremap_nocache(RT305X_SYSC_BASE, PAGE_SIZE);
-	rt305x_memc_base = ioremap_nocache(RT305X_MEMC_BASE, PAGE_SIZE);
-
-	rt305x_clocks_init();
-
-	clk = clk_get(NULL, "cpu");
-	if (IS_ERR(clk))
-		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
-	printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type,
-		clk_get_rate(clk) / 1000000,
-		(clk_get_rate(clk) % 1000000) * 100 / 1000000);
-
-	_machine_restart = rt305x_restart;
-	_machine_halt = rt305x_halt;
-	pm_power_off = rt305x_halt;
-
-	clk = clk_get(NULL, "uart");
-	if (IS_ERR(clk))
-		panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
-
-	ramips_early_serial_setup(0, RT305X_UART0_BASE, clk_get_rate(clk),
-				  RT305X_INTC_IRQ_UART0);
-	ramips_early_serial_setup(1, RT305X_UART1_BASE, clk_get_rate(clk),
-				  RT305X_INTC_IRQ_UART1);
-}
-
-void __init plat_time_init(void)
-{
-	struct clk *clk;
-
-	clk = clk_get(NULL, "cpu");
-	if (IS_ERR(clk))
-		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
-	mips_hpt_frequency = clk_get_rate(clk) / 2;
-}