summaryrefslogtreecommitdiff
path: root/target/linux/rb532
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2009-03-15 12:56:39 +0000
committerFlorian Fainelli <florian@openwrt.org>2009-03-15 12:56:39 +0000
commit499fa7f7a12864f7d9637b52dbc23c6cb572243e (patch)
tree71c61df0a3a052ca694ba475d16d843ee242c651 /target/linux/rb532
parenta54018aa87473925942be51e70e8306ee46f1acc (diff)
downloadmtk-20170518-499fa7f7a12864f7d9637b52dbc23c6cb572243e.zip
mtk-20170518-499fa7f7a12864f7d9637b52dbc23c6cb572243e.tar.gz
mtk-20170518-499fa7f7a12864f7d9637b52dbc23c6cb572243e.tar.bz2
add 2.6.28 patches and kernel config
SVN-Revision: 14884
Diffstat (limited to 'target/linux/rb532')
-rw-r--r--target/linux/rb532/config-2.6.28237
-rw-r--r--target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch42
-rw-r--r--target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch35
-rw-r--r--target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch52
-rw-r--r--target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch33
-rw-r--r--target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch19
-rw-r--r--target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch15
-rw-r--r--target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch31
-rw-r--r--target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch33
-rw-r--r--target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch138
-rw-r--r--target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch18
-rw-r--r--target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch40
-rw-r--r--target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch87
-rw-r--r--target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch25
-rw-r--r--target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch53
-rw-r--r--target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch34
-rw-r--r--target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch36
-rw-r--r--target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch28
-rw-r--r--target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch33
-rw-r--r--target/linux/rb532/patches-2.6.28/020-rc32434_res_name.patch12
-rw-r--r--target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch26
-rw-r--r--target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch91
-rw-r--r--target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch32
-rw-r--r--target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch23
-rw-r--r--target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch48
25 files changed, 1221 insertions, 0 deletions
diff --git a/target/linux/rb532/config-2.6.28 b/target/linux/rb532/config-2.6.28
new file mode 100644
index 0000000..a0c1b3d
--- /dev/null
+++ b/target/linux/rb532/config-2.6.28
@@ -0,0 +1,237 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_8139TOO is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_ATA_SFF=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BITREVERSE=y
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLASSIC_RCU=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CSRC_R4K=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FREEZER is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IDE is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_KEXEC=y
+CONFIG_KMOD=y
+CONFIG_KORINA=y
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+CONFIG_MIKROTIK_RB532=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_START=0x8000000
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_RB532=y
+# CONFIG_PATA_SCH is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+# CONFIG_R6040 is not set
+CONFIG_RC32434_WDT=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+# CONFIG_TC35815 is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_VGASTATE is not set
+CONFIG_VIA_RHINE=y
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_YAFFS_9BYTE_TAGS=y
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_YAFFS_YAFFS1=y
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch b/target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch
new file mode 100644
index 0000000..5786803
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch
@@ -0,0 +1,42 @@
+The code is rather based on trial-and-error than knowledge. Verified Via
+Rhine functionality in PIO as well as MMIO mode.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+Tested-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/pci/pci-rc32434.c | 11 +++++++++++
+ 1 files changed, 11 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
+index 1c2821e..71f7d27 100644
+--- a/arch/mips/pci/pci-rc32434.c
++++ b/arch/mips/pci/pci-rc32434.c
+@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void)
+
+ static int __init rc32434_pci_init(void)
+ {
++ void __iomem *io_map_base;
++
+ pr_info("PCI: Initializing PCI\n");
+
+ ioport_resource.start = rc32434_res_pci_io1.start;
+@@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void)
+
+ rc32434_pcibridge_init();
+
++ io_map_base = ioremap(rc32434_res_pci_io1.start,
++ rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1);
++
++ if (!io_map_base)
++ return -ENOMEM;
++
++ rc32434_controller.io_map_base =
++ (unsigned long)io_map_base - rc32434_res_pci_io1.start;
++
+ register_pci_controller(&rc32434_controller);
+ rc32434_sync();
+
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch b/target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch
new file mode 100644
index 0000000..49f9f4b
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch
@@ -0,0 +1,35 @@
+The algorithm works unconditionally. If bitval is one, the first line is
+a no op and the second line sets the bit at offset position. Vice versa,
+if bitval is zero, the first line clears the bit at offset position and
+the second line is a no op.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ arch/mips/rb532/gpio.c | 6 ++----
+ 1 files changed, 2 insertions(+), 4 deletions(-)
+
+diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
+index 0e84c8a..e35cb75 100644
+--- a/arch/mips/rb532/gpio.c
++++ b/arch/mips/rb532/gpio.c
+@@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigned bitval,
+ unsigned long flags;
+ u32 val;
+
+- bitval = !!bitval; /* map parameter to {0,1} */
+-
+ local_irq_save(flags);
+
+ val = readl(ioaddr);
+- val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */
+- val |= ( bitval << offset ); /* set bit if bitval == 1 */
++ val &= ~(!bitval << offset); /* unset bit if bitval == 0 */
++ val |= (!!bitval << offset); /* set bit if bitval == 1 */
+ writel(val, ioaddr);
+
+ local_irq_restore(flags);
+--
+1.5.6.4
+
+
+
diff --git a/target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch b/target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch
new file mode 100644
index 0000000..d1d73ac
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch
@@ -0,0 +1,52 @@
+After applying the following changes I could verify functionality by
+mounting a filesystem on the cfdisk and reading/writing files in it.
+
+The set_irq_type() function must be wrong, as there is no set_type()
+function defined for the rb532 IRQ chip. But as the used IRQ actually is
+being triggered by a GPIO, setting it's interrupt level should be the
+right alternative. Also to clear a GPIO triggered IRQ, the source has to
+be cleared. This is being done at the end of rb532_pata_irq_handler.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+Acked-by: Florian Fainelli <florian@openwrt.org>
+---
+diff -urN linux-2.6.28.7/drivers/ata/pata_rb532_cf.c linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c
+--- linux-2.6.28.7/drivers/ata/pata_rb532_cf.c 2009-02-20 23:41:27.000000000 +0100
++++ linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c 2009-03-15 13:21:06.000000000 +0100
+@@ -31,6 +31,7 @@
+ #include <scsi/scsi_host.h>
+
+ #include <asm/gpio.h>
++#include <asm/mach-rc32434/gpio.h>
+
+ #define DRV_NAME "pata-rb532-cf"
+ #define DRV_VERSION "0.1.0"
+@@ -63,8 +64,8 @@
+ ata_sff_sync might be sufficient. */
+ ata_sff_dma_pause(ap);
+ ndelay(RB500_CF_IO_DELAY);
+-
+- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
++
++ rb532_gpio_set_ilevel(1, info->gpio_line);
+ }
+
+ static void rb532_pata_exec_command(struct ata_port *ap,
+@@ -113,13 +114,15 @@
+ struct rb532_cf_info *info = ah->private_data;
+
+ if (gpio_get_value(info->gpio_line)) {
+- set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
++ rb532_gpio_set_ilevel(0, info->gpio_line);
+ if (!info->frozen)
+ ata_sff_interrupt(info->irq, dev_instance);
+ } else {
+- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
++ rb532_gpio_set_ilevel(1, info->gpio_line);
+ }
+
++ rb532_gpio_set_istat(0, info->gpio_line);
++
+ return IRQ_HANDLED;
+ }
+
diff --git a/target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch b/target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch
new file mode 100644
index 0000000..1af14ad
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch
@@ -0,0 +1,33 @@
+* rename the offset definition to avoid abiguity with the standard ATA
+ IO address
+* read and write four bytes at once like the original driver does
+* use writesl() and readsl() which implicitly iterate over the data
+
+This patch assumes buflen to be a multiple of four, which is true for
+ATA devices. ATAPI support is not known, though unlikely, as the
+original driver always transfers 512 Bytes at once.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
+---
+diff -urN linux-2.6.28.7/drivers/ata/pata_rb532_cf.c linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c
+--- linux-2.6.28.7/drivers/ata/pata_rb532_cf.c 2009-03-15 13:24:24.000000000 +0100
++++ linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c 2009-03-15 13:26:19.000000000 +0100
+@@ -82,13 +82,10 @@
+ void __iomem *ioaddr = ap->ioaddr.data_addr;
+ int retlen = buflen;
+
+- if (write_data) {
+- for (; buflen > 0; buflen--, buf++)
+- writeb(*buf, ioaddr);
+- } else {
+- for (; buflen > 0; buflen--, buf++)
+- *buf = readb(ioaddr);
+- }
++ if (write_data)
++ writesl(ioaddr, buf, buflen / sizeof(u32));
++ else
++ readsl(ioaddr, buf, buflen / sizeof(u32));
+
+ rb532_pata_finish_io(adev->link->ap);
+ return retlen;
diff --git a/target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch b/target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch
new file mode 100644
index 0000000..7a25bcb
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch
@@ -0,0 +1,19 @@
+Per definition, this function should return the number of bytes
+consumed. Also take care of the unlikely case when buflen is not a
+multiple of four; while transferring, the division cuts the remaining
+bytes, so alter the return value accordingly.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+diff -urN linux-2.6.28.7/drivers/ata/pata_rb532_cf.c linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c
+--- linux-2.6.28.7/drivers/ata/pata_rb532_cf.c 2009-03-15 13:29:09.000000000 +0100
++++ linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c 2009-03-15 13:29:46.000000000 +0100
+@@ -88,7 +88,7 @@
+ readsl(ioaddr, buf, buflen / sizeof(u32));
+
+ rb532_pata_finish_io(adev->link->ap);
+- return retlen;
++ return buflen - (buflen % sizeof(u32));;
+ }
+
+ static void rb532_pata_freeze(struct ata_port *ap)
diff --git a/target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch b/target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch
new file mode 100644
index 0000000..5f2ed2f
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch
@@ -0,0 +1,15 @@
+diff -urN linux-2.6.27.5/arch/mips/kernel/head.S linux-2.6.27.5.new/arch/mips/kernel/head.S
+--- linux-2.6.27.5/arch/mips/kernel/head.S 2008-11-15 19:24:03.000000000 +0100
++++ linux-2.6.27.5.new/arch/mips/kernel/head.S 2008-11-15 19:24:55.000000000 +0100
+@@ -123,6 +123,11 @@
+
+ j kernel_entry
+ nop
++
++
++EXPORT(_image_cmdline)
++ .ascii "CMDLINE:"
++
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ /*
+ * Reserved space for exception handlers.
diff --git a/target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch b/target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch
new file mode 100644
index 0000000..1db2e0e
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch
@@ -0,0 +1,31 @@
+The new value is the one used in the external patch before and allows at
+least a standard MTU of 1500 to be handled correctly. Impact of this
+change gets visible when bigger packets are to be received, issuing:
+| ping -s 492 <IP>
+and bigger payload sized led to 100% packet loss.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index fefb33d..e30c2f4 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -84,7 +84,10 @@
+ #define KORINA_NUM_RDS 64 /* number of receive descriptors */
+ #define KORINA_NUM_TDS 64 /* number of transmit descriptors */
+
+-#define KORINA_RBSIZE 536 /* size of one resource buffer = Ether MTU */
++/* KORINA_RBSIZE is the hardware's default maximum receive
++ * frame size in bytes. Having this hardcoded means that there
++ * is no support for MTU sizes greater than 1500. */
++#define KORINA_RBSIZE 1536 /* size of one resource buffer = Ether MTU */
+ #define KORINA_RDS_MASK (KORINA_NUM_RDS - 1)
+ #define KORINA_TDS_MASK (KORINA_NUM_TDS - 1)
+ #define RD_RING_SIZE (KORINA_NUM_RDS * sizeof(struct dma_desc))
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch b/target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch
new file mode 100644
index 0000000..4eec6fd
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch
@@ -0,0 +1,33 @@
+Without this the driver will crash when the NIC is being restarted.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index e30c2f4..65b8487 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -904,6 +904,8 @@ static int korina_restart(struct net_device *dev)
+
+ korina_free_ring(dev);
+
++ napi_disable(&lp->napi);
++
+ ret = korina_init(dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
+@@ -1070,6 +1072,8 @@ static int korina_close(struct net_device *dev)
+
+ korina_free_ring(dev);
+
++ napi_disable(&lp->napi);
++
+ free_irq(lp->rx_irq, dev);
+ free_irq(lp->tx_irq, dev);
+ free_irq(lp->ovr_irq, dev);
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch b/target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch
new file mode 100644
index 0000000..177678b
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch
@@ -0,0 +1,138 @@
+This function needs an early exit condition to function properly, or
+else caller assumes napi workload wasn't enough to handle all received
+packets and korina_rx is called again (and again and again and ...).
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+--- a/drivers/net/korina.c 2009-01-19 23:19:10.000000000 +0100
++++ b/drivers/net/korina.c 2009-01-19 23:25:31.000000000 +0100
+@@ -353,15 +353,20 @@
+ struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
+ struct sk_buff *skb, *skb_new;
+ u8 *pkt_buf;
+- u32 devcs, pkt_len, dmas, rx_free_desc;
++ u32 devcs, pkt_len, dmas;
+ int count;
+
+ dma_cache_inv((u32)rd, sizeof(*rd));
+
+ for (count = 0; count < limit; count++) {
++ skb = lp->rx_skb[lp->rx_next_done];
++ skb_new = NULL;
+
+ devcs = rd->devcs;
+
++ if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
++ break;
++
+ /* Update statistics counters */
+ if (devcs & ETH_RX_CRC)
+ dev->stats.rx_crc_errors++;
+@@ -384,64 +389,53 @@
+ * in Rc32434 (errata ref #077) */
+ dev->stats.rx_errors++;
+ dev->stats.rx_dropped++;
+- }
+-
+- while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
+- /* init the var. used for the later
+- * operations within the while loop */
+- skb_new = NULL;
++ } else if ((devcs & ETH_RX_ROK)) {
+ pkt_len = RCVPKT_LENGTH(devcs);
+- skb = lp->rx_skb[lp->rx_next_done];
++ /* must be the (first and) last
++ * descriptor then */
++ pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
++
++ /* invalidate the cache */
++ dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
++
++ /* Malloc up new buffer. */
++ skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
++
++ if (!skb_new)
++ break;
++ /* Do not count the CRC */
++ skb_put(skb, pkt_len - 4);
++ skb->protocol = eth_type_trans(skb, dev);
++
++ /* Pass the packet to upper layers */
++ netif_receive_skb(skb);
++ dev->stats.rx_packets++;
++ dev->stats.rx_bytes += pkt_len;
++
++ /* Update the mcast stats */
++ if (devcs & ETH_RX_MP)
++ dev->stats.multicast++;
+
+- if ((devcs & ETH_RX_ROK)) {
+- /* must be the (first and) last
+- * descriptor then */
+- pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+-
+- /* invalidate the cache */
+- dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+-
+- /* Malloc up new buffer. */
+- skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+-
+- if (!skb_new)
+- break;
+- /* Do not count the CRC */
+- skb_put(skb, pkt_len - 4);
+- skb->protocol = eth_type_trans(skb, dev);
+-
+- /* Pass the packet to upper layers */
+- netif_receive_skb(skb);
+- dev->last_rx = jiffies;
+- dev->stats.rx_packets++;
+- dev->stats.rx_bytes += pkt_len;
+-
+- /* Update the mcast stats */
+- if (devcs & ETH_RX_MP)
+- dev->stats.multicast++;
+-
+- lp->rx_skb[lp->rx_next_done] = skb_new;
+- }
+-
+- rd->devcs = 0;
+-
+- /* Restore descriptor's curr_addr */
+- if (skb_new)
+- rd->ca = CPHYSADDR(skb_new->data);
+- else
+- rd->ca = CPHYSADDR(skb->data);
++ lp->rx_skb[lp->rx_next_done] = skb_new;
++ }
++ rd->devcs = 0;
++
++ /* Restore descriptor's curr_addr */
++ if (skb_new)
++ rd->ca = CPHYSADDR(skb_new->data);
++ else
++ rd->ca = CPHYSADDR(skb->data);
+
+- rd->control = DMA_COUNT(KORINA_RBSIZE) |
++ rd->control = DMA_COUNT(KORINA_RBSIZE) |
+ DMA_DESC_COD | DMA_DESC_IOD;
+- lp->rd_ring[(lp->rx_next_done - 1) &
+- KORINA_RDS_MASK].control &=
+- ~DMA_DESC_COD;
+-
+- lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+- dma_cache_wback((u32)rd, sizeof(*rd));
+- rd = &lp->rd_ring[lp->rx_next_done];
+- writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+- }
++ lp->rd_ring[(lp->rx_next_done - 1) &
++ KORINA_RDS_MASK].control &=
++ ~DMA_DESC_COD;
++
++ lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
++ dma_cache_wback((u32)rd, sizeof(*rd));
++ rd = &lp->rd_ring[lp->rx_next_done];
++ writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+ }
+
+ dmas = readl(&lp->rx_dma_regs->dmas);
diff --git a/target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch b/target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch
new file mode 100644
index 0000000..c5e1b9a
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch
@@ -0,0 +1,18 @@
+The called netif_rx_schedule() does all the work for us:
+- it checks the return value of netif_rx_schedule_prep() and
+- if everything is ok calls __netif_rx_schedule().
+Before this change, the driver received absolutely nothing.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+--- a/drivers/net/korina.c 2009-01-19 23:26:19.000000000 +0100
++++ b/drivers/net/korina.c 2009-01-19 23:27:06.000000000 +0100
+@@ -330,7 +330,7 @@
+
+ dmas = readl(&lp->rx_dma_regs->dmas);
+ if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
+- netif_rx_schedule_prep(dev, &lp->napi);
++ netif_rx_schedule(dev, &lp->napi);
+
+ dmasm = readl(&lp->rx_dma_regs->dmasm);
+ writel(dmasm | (DMA_STAT_DONE |
diff --git a/target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch b/target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch
new file mode 100644
index 0000000..101e869
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch
@@ -0,0 +1,40 @@
+Triggering TX before the write to the DMA status mask register leads to
+transferring packets with maximum payload no matter what the actual
+packet size is.
+While here, also trigger RX scheduling after writing the DMA status mask
+register, like it was in the original driver before it was sent
+upstream.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+--- a/drivers/net/korina.c 2009-01-19 23:27:41.000000000 +0100
++++ b/drivers/net/korina.c 2009-01-19 23:29:08.000000000 +0100
+@@ -330,12 +330,12 @@
+
+ dmas = readl(&lp->rx_dma_regs->dmas);
+ if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
+- netif_rx_schedule(dev, &lp->napi);
+-
+ dmasm = readl(&lp->rx_dma_regs->dmasm);
+ writel(dmasm | (DMA_STAT_DONE |
+ DMA_STAT_HALT | DMA_STAT_ERR),
+ &lp->rx_dma_regs->dmasm);
++
++ netif_rx_schedule(dev, &lp->napi);
+
+ if (dmas & DMA_STAT_ERR)
+ printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+@@ -621,11 +621,11 @@
+ dmas = readl(&lp->tx_dma_regs->dmas);
+
+ if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
+- korina_tx(dev);
+-
+ dmasm = readl(&lp->tx_dma_regs->dmasm);
+ writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
+ &lp->tx_dma_regs->dmasm);
++
++ korina_tx(dev);
+
+ if (lp->tx_chain_status == desc_filled &&
+ (readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
diff --git a/target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch b/target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch
new file mode 100644
index 0000000..6babc32
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch
@@ -0,0 +1,87 @@
+Originally this must have been a rewrite error when introducing
+'chain_index'. But the original driver did not use the previous chain
+item everywhere: when altering the address tx_chain_tail points to, it
+should move forward, not backwards.
+Also this is not an "index" but rather the penultimate element in the
+chain, so rename it accordingly.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 22 +++++++++++-----------
+ 1 files changed, 11 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index dced5e7..f200175 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ struct korina_private *lp = netdev_priv(dev);
+ unsigned long flags;
+ u32 length;
+- u32 chain_index;
++ u32 chain_prev, chain_next;
+ struct dma_desc *td;
+
+ spin_lock_irqsave(&lp->lock, flags);
+@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ /* Setup the transmit descriptor. */
+ dma_cache_inv((u32) td, sizeof(*td));
+ td->ca = CPHYSADDR(skb->data);
+- chain_index = (lp->tx_chain_tail - 1) &
+- KORINA_TDS_MASK;
++ chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
++ chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
+
+ if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
+ if (lp->tx_chain_status == desc_empty) {
+@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ td->control = DMA_COUNT(length) |
+ DMA_DESC_COF | DMA_DESC_IOF;
+ /* Move tail */
+- lp->tx_chain_tail = chain_index;
++ lp->tx_chain_tail = chain_next;
+ /* Write to NDPTR */
+ writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
+ &lp->tx_dma_regs->dmandptr);
+@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ td->control = DMA_COUNT(length) |
+ DMA_DESC_COF | DMA_DESC_IOF;
+ /* Link to prev */
+- lp->td_ring[chain_index].control &=
++ lp->td_ring[chain_prev].control &=
+ ~DMA_DESC_COF;
+ /* Link to prev */
+- lp->td_ring[chain_index].link = CPHYSADDR(td);
++ lp->td_ring[chain_prev].link = CPHYSADDR(td);
+ /* Move tail */
+- lp->tx_chain_tail = chain_index;
++ lp->tx_chain_tail = chain_next;
+ /* Write to NDPTR */
+ writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
+ &(lp->tx_dma_regs->dmandptr));
+@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ td->control = DMA_COUNT(length) |
+ DMA_DESC_COF | DMA_DESC_IOF;
+ /* Move tail */
+- lp->tx_chain_tail = chain_index;
++ lp->tx_chain_tail = chain_next;
+ lp->tx_chain_status = desc_filled;
+ netif_stop_queue(dev);
+ } else {
+ /* Update tail */
+ td->control = DMA_COUNT(length) |
+ DMA_DESC_COF | DMA_DESC_IOF;
+- lp->td_ring[chain_index].control &=
++ lp->td_ring[chain_prev].control &=
+ ~DMA_DESC_COF;
+- lp->td_ring[chain_index].link = CPHYSADDR(td);
+- lp->tx_chain_tail = chain_index;
++ lp->td_ring[chain_prev].link = CPHYSADDR(td);
++ lp->tx_chain_tail = chain_next;
+ }
+ }
+ dma_cache_wback((u32) td, sizeof(*td));
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch b/target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch
new file mode 100644
index 0000000..79ae024
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch
@@ -0,0 +1,25 @@
+Apparently this doesn't make sense. Otherwise the queue gets disabled as
+soon as it's getting empty and can only be resurrected by a driver
+restart.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index f200175..bd33fa9 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ /* Move tail */
+ lp->tx_chain_tail = chain_next;
+ lp->tx_chain_status = desc_filled;
+- netif_stop_queue(dev);
+ } else {
+ /* Update tail */
+ td->control = DMA_COUNT(length) |
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch b/target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch
new file mode 100644
index 0000000..74059fb
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch
@@ -0,0 +1,53 @@
+As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared
+IRQs". Since these IRQs' values are hardcoded and my test system doesn't
+show any shared use of IRQs at all, rather make them non-shared than
+non-disabled.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 8 ++++----
+ 1 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index bd33fa9..1d6e48e 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -1000,14 +1000,14 @@ static int korina_open(struct net_device *dev)
+ * that handles the Done Finished
+ * Ovr and Und Events */
+ ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
+- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
++ IRQF_DISABLED, "Korina ethernet Rx", dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
+ dev->name, lp->rx_irq);
+ goto err_release;
+ }
+ ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
+- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
++ IRQF_DISABLED, "Korina ethernet Tx", dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
+ dev->name, lp->tx_irq);
+@@ -1016,7 +1016,7 @@ static int korina_open(struct net_device *dev)
+
+ /* Install handler for overrun error. */
+ ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
+- IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
++ IRQF_DISABLED, "Ethernet Overflow", dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
+ dev->name, lp->ovr_irq);
+@@ -1025,7 +1025,7 @@ static int korina_open(struct net_device *dev)
+
+ /* Install handler for underflow error. */
+ ret = request_irq(lp->und_irq, &korina_und_interrupt,
+- IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
++ IRQF_DISABLED, "Ethernet Underflow", dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
+ dev->name, lp->und_irq);
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch b/target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch
new file mode 100644
index 0000000..ab82cb5
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch
@@ -0,0 +1,34 @@
+As the assigned value is being overwritten shortly after, it can be
+dropped and so the whole variable definition moved to the start of the
+function.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 3 +--
+ 1 files changed, 1 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index 60ae7bf..75010ca 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -743,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = {
+ static void korina_alloc_ring(struct net_device *dev)
+ {
+ struct korina_private *lp = netdev_priv(dev);
++ struct sk_buff *skb;
+ int i;
+
+ /* Initialize the transmit descriptors */
+@@ -758,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev)
+
+ /* Initialize the receive descriptors */
+ for (i = 0; i < KORINA_NUM_RDS; i++) {
+- struct sk_buff *skb = lp->rx_skb[i];
+-
+ skb = dev_alloc_skb(KORINA_RBSIZE + 2);
+ if (!skb)
+ break;
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch b/target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch
new file mode 100644
index 0000000..0484f2c
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch
@@ -0,0 +1,36 @@
+After the last loop iteration, i has the value RC32434_NUM_RDS and
+therefore leads to an index overflow when used afterwards to address the
+last element. This is yet another another bug introduced when rewriting
+parts of the driver for upstream preparation, as the original driver
+used 'RC32434_NUM_RDS - 1' instead.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 9 +++++----
+ 1 files changed, 5 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index 1d6e48e..67fbdf4 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -769,11 +769,12 @@ static void korina_alloc_ring(struct net_device *dev)
+ lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
+ }
+
+- /* loop back */
+- lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
+- lp->rx_next_done = 0;
++ /* loop back receive descriptors, so the last
++ * descriptor points to the first one */
++ lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
++ lp->rd_ring[i - 1].control |= DMA_DESC_COD;
+
+- lp->rd_ring[i].control |= DMA_DESC_COD;
++ lp->rx_next_done = 0;
+ lp->rx_chain_head = 0;
+ lp->rx_chain_tail = 0;
+ lp->rx_chain_status = desc_empty;
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch b/target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch
new file mode 100644
index 0000000..f9f8dac
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch
@@ -0,0 +1,28 @@
+This is copy and paste from the original driver. As skb_reserve() is
+also called within korina_alloc_ring() when initially allocating the
+receive descriptors, the same should be done when allocating new space
+after passing an skb to upper layers.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index 67fbdf4..60ae7bf 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit)
+ if (devcs & ETH_RX_MP)
+ dev->stats.multicast++;
+
++ /* 16 bit align */
++ skb_reserve(skb_new, 2);
++
+ lp->rx_skb[lp->rx_next_done] = skb_new;
+ }
+
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch b/target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch
new file mode 100644
index 0000000..bec3514
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch
@@ -0,0 +1,33 @@
+I'm not sure if this is necessary, but the original driver did it and
+apparently also many other drivers do it, so it should not be completely
+wrong to do it.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index 75010ca..56b4db2 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -419,6 +419,7 @@ static int korina_rx(struct net_device *dev, int limit)
+ /* 16 bit align */
+ skb_reserve(skb_new, 2);
+
++ skb_new->dev = dev;
+ lp->rx_skb[lp->rx_next_done] = skb_new;
+ }
+
+@@ -763,6 +764,7 @@ static void korina_alloc_ring(struct net_device *dev)
+ if (!skb)
+ break;
+ skb_reserve(skb, 2);
++ skb->dev = dev;
+ lp->rx_skb[i] = skb;
+ lp->rd_ring[i].control = DMA_DESC_IOD |
+ DMA_COUNT(KORINA_RBSIZE);
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/020-rc32434_res_name.patch b/target/linux/rb532/patches-2.6.28/020-rc32434_res_name.patch
new file mode 100644
index 0000000..e61ec83
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/020-rc32434_res_name.patch
@@ -0,0 +1,12 @@
+diff -urN linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c
+--- linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c 2008-11-07 18:55:34.000000000 +0100
++++ linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c 2008-11-15 22:06:28.000000000 +0100
+@@ -261,7 +261,7 @@
+ int ret;
+ struct resource *r;
+
+- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
++ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
+ if (!r) {
+ printk(KERN_ERR KBUILD_MODNAME
+ "failed to retrieve resources\n");
diff --git a/target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch b/target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch
new file mode 100644
index 0000000..9aaeef3
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch
@@ -0,0 +1,26 @@
+As the korina ethernet driver uses platform_get_drvdata() to extract the
+driver specific data from the platform device, driver_data has to be
+used here.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ arch/mips/rb532/devices.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
+index 9b6b744..3c74561 100644
+--- a/arch/mips/rb532/devices.c
++++ b/arch/mips/rb532/devices.c
+@@ -89,7 +89,7 @@ static struct korina_device korina_dev0_data = {
+ static struct platform_device korina_dev0 = {
+ .id = -1,
+ .name = "korina",
+- .dev.platform_data = &korina_dev0_data,
++ .dev.driver_data = &korina_dev0_data,
+ .resource = korina_dev0_res,
+ .num_resources = ARRAY_SIZE(korina_dev0_res),
+ };
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch b/target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch
new file mode 100644
index 0000000..ae42a4d
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch
@@ -0,0 +1,91 @@
+Auto-detection works just fine, so use it instead of specifying the type
+manually. Also define a platform device for the uart, as suggested by
+David Daney.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ arch/mips/rb532/devices.c | 26 ++++++++++++++++++++++++++
+ arch/mips/rb532/serial.c | 2 +-
+ 2 files changed, 27 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
+index c1c2918..9b6b744 100644
+--- a/arch/mips/rb532/devices.c
++++ b/arch/mips/rb532/devices.c
+@@ -24,6 +24,7 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
++#include <linux/serial_8250.h>
+
+ #include <asm/bootinfo.h>
+
+@@ -39,6 +40,8 @@
+ #define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+ #define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+
++extern unsigned int idt_cpu_freq;
++
+ static struct resource korina_dev0_res[] = {
+ {
+ .name = "korina_regs",
+@@ -214,12 +217,32 @@ static struct platform_device rb532_wdt = {
+ .num_resources = ARRAY_SIZE(rb532_wdt_res),
+ };
+
++static struct plat_serial8250_port rb532_uart_res[] = {
++ {
++ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
++ .irq = UART0_IRQ,
++ .regshift = 2,
++ .iotype = UPIO_MEM,
++ .flags = UPF_BOOT_AUTOCONF,
++ },
++ {
++ .flags = 0,
++ }
++};
++
++static struct platform_device rb532_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev.platform_data = &rb532_uart_res,
++};
++
+ static struct platform_device *rb532_devs[] = {
+ &korina_dev0,
+ &nand_slot0,
+ &cf_slot0,
+ &rb532_led,
+ &rb532_button,
++ &rb532_uart,
+ &rb532_wdt
+ };
+
+@@ -294,6 +317,9 @@ static int __init plat_setup_devices(void)
+ /* Initialise the NAND device */
+ rb532_nand_setup();
+
++ /* set the uart clock to the current cpu frequency */
++ rb532_uart_res[0].uartclk = idt_cpu_freq;
++
+ return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+ }
+
+diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
+index 3e0d7ec..00ed19f 100644
+--- a/arch/mips/rb532/serial.c
++++ b/arch/mips/rb532/serial.c
+@@ -36,7 +36,7 @@
+ extern unsigned int idt_cpu_freq;
+
+ static struct uart_port rb532_uart = {
+- .type = PORT_16550A,
++ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ .irq = UART0_IRQ,
+ .iotype = UPIO_MEM,
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch b/target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch
new file mode 100644
index 0000000..64a6d89
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch
@@ -0,0 +1,32 @@
+This register just contains the address of the actual resource, so
+initialisation has to be the same as cf_slot0_res and nand_slot0_res.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
+index d75eb19..40deb11 100644
+--- a/arch/mips/rb532/gpio.c
++++ b/arch/mips/rb532/gpio.c
+@@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_res[] = {
+ static struct resource rb532_dev3_ctl_res[] = {
+ {
+ .name = "dev3_ctl",
+- .start = REGBASE + DEV3BASE,
+- .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
+ .flags = IORESOURCE_MEM,
+ }
+ };
+@@ -243,6 +241,9 @@ int __init rb532_gpio_init(void)
+ /* Register our GPIO chip */
+ gpiochip_add(&rb532_gpio_chip->chip);
+
++ rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE);
++ rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000;
++
+ r = rb532_dev3_ctl_res;
+ dev3.base = ioremap_nocache(r->start, r->end - r->start);
+
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch b/target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch
new file mode 100644
index 0000000..fc0c77e
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch
@@ -0,0 +1,23 @@
+The data to be written is just a byte, so use writeb instead of writel.
+Also, dev3.base contains the address, not the data so referencing here
+is wrong.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
+index 40deb11..7e0cb4f 100644
+--- a/arch/mips/rb532/gpio.c
++++ b/arch/mips/rb532/gpio.c
+@@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+ spin_lock_irqsave(&dev3.lock, flags);
+
+ dev3.state = (dev3.state | or_mask) & ~nand_mask;
+- writel(dev3.state, &dev3.base);
++ writeb(dev3.state, dev3.base);
+
+ spin_unlock_irqrestore(&dev3.lock, flags);
+ }
+--
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch b/target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch
new file mode 100644
index 0000000..7091609
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch
@@ -0,0 +1,48 @@
+--- a/arch/mips/rb532/devices.c 2009-01-25 13:36:15.000000000 +0100
++++ b/arch/mips/rb532/devices.c 2009-01-25 14:00:56.000000000 +0100
+@@ -119,6 +119,19 @@
+ };
+
+ /* Resources and device for NAND */
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load. So set the oobinfo
++ * when creating the partitions
++ */
++static struct nand_ecclayout rb532_nand_ecclayout = {
++ .eccbytes = 6,
++ .eccpos = { 8, 9, 10, 13, 14, 15 },
++ .oobavail = 9,
++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
+ static int rb532_dev_ready(struct mtd_info *mtd)
+ {
+ return gpio_get_value(GPIO_RDY);
+@@ -277,6 +290,16 @@
+ /* NAND definitions */
+ #define NAND_CHIP_DELAY 25
+
++static int rb532_nand_fixup(struct mtd_info *mtd)
++{
++ struct nand_chip *chip = mtd->priv;
++
++ if (mtd->writesize == 512)
++ chip->ecc.layout = &rb532_nand_ecclayout;
++
++ return 0;
++}
++
+ static void __init rb532_nand_setup(void)
+ {
+ switch (mips_machtype) {
+@@ -296,6 +319,8 @@
+ rb532_nand_data.chip.partitions = rb532_partition_info;
+ rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+ rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
++
++ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
+ }
+
+