nuke obsolete kernel stuff

SVN-Revision: 14875

1 files changed, 0 insertions, 322 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.24/1215-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch b/target/linux/s3c24xx/patches-2.6.24/1215-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch
deleted file mode 100644
index b3f0170..0000000
--- a/target/linux/s3c24xx/patches-2.6.24/1215-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch
+++ /dev/null
@@ -1,322 +0,0 @@
-From e2303161c93a90b966679b84c18838398b847d2c Mon Sep 17 00:00:00 2001
-From: Andrzej Zaborowski <balrog@zabor.org>
-Date: Wed, 2 Jul 2008 22:44:22 +0100
-Subject: [PATCH] From 119f4e02ba81cffe4dbc88d8ff667048ad28d925 Mon Sep 17 00:00:00 2001
- Subject: [PATCH] Hacky CONFIG_NO_IDLE_HZ (dyn-tick) support for S3C24xx.
-
----
- arch/arm/plat-s3c24xx/time.c |  247 +++++++++++++++++++++++++++++++++++-------
- 1 files changed, 209 insertions(+), 38 deletions(-)
-
-diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
-index 39fc33d..42d7111 100644
---- a/arch/arm/plat-s3c24xx/time.c
-+++ b/arch/arm/plat-s3c24xx/time.c
-@@ -3,6 +3,8 @@
-  * Copyright (C) 2003-2005 Simtec Electronics
-  *	Ben Dooks, <ben@simtec.co.uk>
-  *
-+ * dyn_tick support by Andrzej Zaborowski based on omap_dyn_tick_timer.
-+ *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2 of the License, or
-@@ -44,6 +46,9 @@ static unsigned long timer_startval;
- static unsigned long timer_usec_ticks;
- static struct work_struct resume_work;
- 
-+unsigned long pclk;
-+struct clk *clk;
-+
- #define TIMER_USEC_SHIFT 16
- 
- /* we use the shifted arithmetic to work out the ratio of timer ticks
-@@ -180,11 +185,7 @@ static void s3c2410_timer_setup (void)
- 		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
- 		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
- 	} else {
--		unsigned long pclk;
--		struct clk *clk;
--
--		/* for the h1940 (and others), we use the pclk from the core
--		 * to generate the timer values. since values around 50 to
-+		/* since values around 50 to
- 		 * 70MHz are not values we can directly generate the timer
- 		 * value from, we need to pre-scale and divide before using it.
- 		 *
-@@ -192,20 +193,7 @@ static void s3c2410_timer_setup (void)
- 		 * (8.45 ticks per usec)
- 		 */
- 
--		/* this is used as default if no other timer can be found */
--
--		clk = clk_get(NULL, "timers");
--		if (IS_ERR(clk))
--			panic("failed to get clock for system timer");
--
--		clk_enable(clk);
--
--		pclk = clk_get_rate(clk);
--
--		printk("pclk = %lu\n", pclk);
--
- 		/* configure clock tick */
--
- 		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
- 		printk("timer_usec_ticks = %lu\n", timer_usec_ticks);
- 
-@@ -216,11 +204,6 @@ static void s3c2410_timer_setup (void)
- 		tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
- 
- 		tcnt = (pclk / 6) / HZ;
--
--		/* start the timer running */
--		tcon |= S3C2410_TCON_T4START | S3C2410_TCON_T4RELOAD;
--		tcon &= ~S3C2410_TCON_T4MANUALUPD;
--		__raw_writel(tcon, S3C2410_TCON);
- 	}
- 
- 	/* timers reload after counting zero, so reduce the count by 1 */
-@@ -262,27 +245,37 @@ static void s3c2410_timer_setup (void)
- 
- }
- 
-+struct sys_timer s3c24xx_timer;
- static void timer_resume_work(struct work_struct *work)
- {
--	s3c2410_timer_setup();
--}
--
--/* ooh a nasty situation arises if we try to call s3c2410_timer_setup() from
-- * the resume handler.  It is called in atomic context but the clock APIs
-- * try to lock a mutex which may sleep.  We are in a bit of an unusual
-- * situation because we don't have a tick source right now, but it should be
-- * okay to try to schedule a work item... hopefully
-- */
--
--static void s3c2410_timer_resume_atomic(void)
--{
--	int ret = schedule_work(&resume_work);
--	if (!ret)
--		printk(KERN_INFO"Failed to schedule_work tick ctr (%d)\n", ret);
-+	clk_enable(clk);
-+
-+#ifdef CONFIG_NO_IDLE_HZ
-+	if (s3c24xx_timer.dyn_tick->state & DYN_TICK_ENABLED)
-+		s3c24xx_timer.dyn_tick->enable();
-+	else
-+#endif
-+		s3c2410_timer_setup();
- }
- 
- static void __init s3c2410_timer_init (void)
- {
-+	if (!use_tclk1_12()) {
-+		/* for the h1940 (and others), we use the pclk from the core
-+		 * to generate the timer values.
-+		 */
-+
-+		/* this is used as default if no other timer can be found */
-+		clk = clk_get(NULL, "timers");
-+		if (IS_ERR(clk))
-+			panic("failed to get clock for system timer");
-+
-+		clk_enable(clk);
-+
-+		pclk = clk_get_rate(clk);
-+		printk("pclk = %lu\n", pclk);
-+	}
-+
- 	INIT_WORK(&resume_work, timer_resume_work);
- 	s3c2410_timer_setup();
- 	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
-@@ -304,8 +297,186 @@ static void s3c2410_timer_resume(void)
- 		    "s3c2410_timer_resume_work already queued ???\n");
- }
- 
-+#ifdef CONFIG_NO_IDLE_HZ
-+/*
-+ * We'll set a constant prescaler so we don't have to bother setting it
-+ * when reprogramming and so that we avoid costly divisions.
-+ *
-+ * (2 * HZ) << INPUT_FREQ_SHIFT is the desired frequency after prescaler.
-+ * At HZ == 200, HZ * 1024 should work for PCLKs of up to ~53.5 MHz.
-+ */
-+#define INPUT_FREQ_SHIFT	9
-+
-+static int ticks_last;
-+static int ticks_left;
-+static uint32_t tcnto_last;
-+
-+static inline int s3c24xx_timer_read(void)
-+{
-+	uint32_t tcnto = __raw_readl(S3C2410_TCNTO(4));
-+
-+	/*
-+	 * WARNING: sometimes we get called before TCNTB has been
-+	 * loaded into the counter and TCNTO then returns its previous
-+	 * value and kill us, so don't do anything before counter is
-+	 * reloaded.
-+	 */
-+	if (unlikely(tcnto == tcnto_last))
-+		return ticks_last;
-+
-+	tcnto_last = -1;
-+	return tcnto <<
-+		((__raw_readl(S3C2410_TCFG1) >> S3C2410_TCFG1_MUX4_SHIFT) & 3);
-+}
-+
-+static inline void s3c24xx_timer_program(int ticks)
-+{
-+	uint32_t tcon = __raw_readl(S3C2410_TCON) & ~(7 << 20);
-+	uint32_t tcfg1 = __raw_readl(S3C2410_TCFG1) & ~S3C2410_TCFG1_MUX4_MASK;
-+
-+	/* Just make sure the timer is stopped.  */
-+	__raw_writel(tcon, S3C2410_TCON);
-+
-+	/* TODO: add likely()ies / unlikely()ies */
-+	if (ticks >> 18) {
-+		ticks_last = min(ticks, 0xffff << 3);
-+		ticks_left = ticks - ticks_last;
-+		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV16, S3C2410_TCFG1);
-+		__raw_writel(ticks_last >> 3, S3C2410_TCNTB(4));
-+	} else if (ticks >> 17) {
-+		ticks_last = ticks;
-+		ticks_left = 0;
-+		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV8, S3C2410_TCFG1);
-+		__raw_writel(ticks_last >> 2, S3C2410_TCNTB(4));
-+	} else if (ticks >> 16) {
-+		ticks_last = ticks;
-+		ticks_left = 0;
-+		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV4, S3C2410_TCFG1);
-+		__raw_writel(ticks_last >> 1, S3C2410_TCNTB(4));
-+	} else {
-+		ticks_last = ticks;
-+		ticks_left = 0;
-+		__raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV2, S3C2410_TCFG1);
-+		__raw_writel(ticks_last >> 0, S3C2410_TCNTB(4));
-+	}
-+
-+	tcnto_last = __raw_readl(S3C2410_TCNTO(4));
-+	__raw_writel(tcon | S3C2410_TCON_T4MANUALUPD,
-+			S3C2410_TCON);
-+	__raw_writel(tcon | S3C2410_TCON_T4START,
-+			S3C2410_TCON);
-+}
-+
-+/*
-+ * If we have already waited all the time we were supposed to wait,
-+ * kick the timer, setting the longest allowed timeout value just
-+ * for time-keeping.
-+ */
-+static inline void s3c24xx_timer_program_idle(void)
-+{
-+	s3c24xx_timer_program(0xffff << 3);
-+}
-+
-+static inline void s3c24xx_timer_update(int restart)
-+{
-+	int ticks_cur = s3c24xx_timer_read();
-+	int jiffies_elapsed = (ticks_last - ticks_cur) >> INPUT_FREQ_SHIFT;
-+	int subjiffy = ticks_last - (jiffies_elapsed << INPUT_FREQ_SHIFT);
-+
-+	if (restart) {
-+		if (ticks_left >= (1 << INPUT_FREQ_SHIFT))
-+			s3c24xx_timer_program(ticks_left);
-+		else
-+			s3c24xx_timer_program_idle();
-+		ticks_last += subjiffy;
-+	} else
-+		ticks_last = subjiffy;
-+
-+	while (jiffies_elapsed --)
-+		timer_tick();
-+}
-+
-+/* Called when the timer expires.  */
-+static irqreturn_t s3c24xx_timer_handler(int irq, void *dev_id)
-+{
-+	tcnto_last = -1;
-+	s3c24xx_timer_update(1);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/* Called to update jiffies with time elapsed.  */
-+static irqreturn_t s3c24xx_timer_handler_dyn_tick(int irq, void *dev_id)
-+{
-+	s3c24xx_timer_update(0);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Programs the next timer interrupt needed.  Called when dynamic tick is
-+ * enabled, and to reprogram the ticks to skip from pm_idle.  The CPU goes
-+ * to sleep directly after this.
-+ */
-+static void s3c24xx_timer_reprogram_dyn_tick(unsigned long next_jiffies)
-+{
-+	int subjiffy_left = ticks_last - s3c24xx_timer_read();
-+
-+	s3c24xx_timer_program(max((int) next_jiffies, 1) << INPUT_FREQ_SHIFT);
-+	ticks_last += subjiffy_left;
-+}
-+
-+static unsigned long s3c24xx_timer_offset_dyn_tick(void)
-+{
-+	/* TODO */
-+	return 0;
-+}
-+
-+static int s3c24xx_timer_enable_dyn_tick(void)
-+{
-+	/* Set our constant prescaler.  */
-+	uint32_t tcfg0 = __raw_readl(S3C2410_TCFG0);
-+	int prescaler =
-+		max(min(256, (int) pclk / (HZ << (INPUT_FREQ_SHIFT + 1))), 1);
-+
-+	tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-+	tcfg0 |= (prescaler - 1) << S3C2410_TCFG_PRESCALER1_SHIFT;
-+	__raw_writel(tcfg0, S3C2410_TCFG0);
-+
-+	/* Override handlers.  */
-+	s3c2410_timer_irq.handler = s3c24xx_timer_handler;
-+	s3c24xx_timer.offset = s3c24xx_timer_offset_dyn_tick;
-+
-+	printk(KERN_INFO "dyn_tick enabled on s3c24xx timer 4, "
-+			"%li Hz pclk with prescaler %i\n", pclk, prescaler);
-+
-+	s3c24xx_timer_program_idle();
-+
-+	return 0;
-+}
-+
-+static int s3c24xx_timer_disable_dyn_tick(void)
-+{
-+	s3c2410_timer_irq.handler = s3c2410_timer_interrupt;
-+	s3c24xx_timer.offset = s3c2410_gettimeoffset;
-+	s3c2410_timer_setup();
-+
-+	return 0;
-+}
-+
-+static struct dyn_tick_timer s3c24xx_dyn_tick_timer = {
-+	.enable		= s3c24xx_timer_enable_dyn_tick,
-+	.disable	= s3c24xx_timer_disable_dyn_tick,
-+	.reprogram	= s3c24xx_timer_reprogram_dyn_tick,
-+	.handler	= s3c24xx_timer_handler_dyn_tick,
-+};
-+#endif	/* CONFIG_NO_IDLE_HZ */
-+
- struct sys_timer s3c24xx_timer = {
- 	.init		= s3c2410_timer_init,
- 	.offset		= s3c2410_gettimeoffset,
- 	.resume		= s3c2410_timer_resume,
-+#ifdef CONFIG_NO_IDLE_HZ
-+	.dyn_tick	= &s3c24xx_dyn_tick_timer,
-+#endif
- };
--- 
-1.5.6.5
-