summaryrefslogtreecommitdiff
path: root/target/linux/storm/patches/007-mtd.patch
diff options
context:
space:
mode:
authorImre Kaloz <kaloz@openwrt.org>2008-06-05 17:14:02 +0000
committerImre Kaloz <kaloz@openwrt.org>2008-06-05 17:14:02 +0000
commit12d5244f2b95681f494b90e26e21d90e4bd88929 (patch)
tree24c34e6edb6d50c28a61df63b394818a7171bef0 /target/linux/storm/patches/007-mtd.patch
parent6ca4659c4e3f5851d0c1ec7779ce34f339c925db (diff)
downloadmtk-20170518-12d5244f2b95681f494b90e26e21d90e4bd88929.zip
mtk-20170518-12d5244f2b95681f494b90e26e21d90e4bd88929.tar.gz
mtk-20170518-12d5244f2b95681f494b90e26e21d90e4bd88929.tar.bz2
rename and renumber storm patches
SVN-Revision: 11368
Diffstat (limited to 'target/linux/storm/patches/007-mtd.patch')
-rw-r--r--target/linux/storm/patches/007-mtd.patch4949
1 files changed, 4949 insertions, 0 deletions
diff --git a/target/linux/storm/patches/007-mtd.patch b/target/linux/storm/patches/007-mtd.patch
new file mode 100644
index 0000000..8e397bc
--- /dev/null
+++ b/target/linux/storm/patches/007-mtd.patch
@@ -0,0 +1,4949 @@
+--- a/drivers/mtd/chips/Kconfig
++++ b/drivers/mtd/chips/Kconfig
+@@ -220,6 +220,13 @@
+ This option enables basic support for ROM chips accessed through
+ a bus mapping driver.
+
++config MTD_SERIAL
++ tristate "Support for Serial chips in bus mapping"
++ depends on MTD
++ help
++ This option enables basic support for Serial chips accessed through
++ a bus mapping driver.
++
+ config MTD_ABSENT
+ tristate "Support for absent chips in bus mapping"
+ help
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,10 +39,15 @@
+ #include <linux/mtd/cfi.h>
+ #include <linux/mtd/xip.h>
+
++//****** Storlink SoC ******
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
+-
+-#define MAX_WORD_RETRIES 3
++//#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
++#define FORCE_FAST_PROG 0
++
++//#define MAX_WORD_RETRIES 3
++#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY
++//**************************
+
+ #define MANUFACTURER_AMD 0x0001
+ #define MANUFACTURER_ATMEL 0x001F
+@@ -322,6 +327,13 @@
+ #endif
+
+ bootloc = extp->TopBottom;
++//****** Storlink SoC ******
++ if(bootloc == 5)
++ {
++ bootloc = 3;
++ extp->TopBottom = 3;
++ }
++//**************************
+ if ((bootloc != 2) && (bootloc != 3)) {
+ printk(KERN_WARNING "%s: CFI does not contain boot "
+ "bank location. Assuming top.\n", map->name);
+@@ -340,6 +352,9 @@
+ cfi->cfiq->EraseRegionInfo[j] = swap;
+ }
+ }
++#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
++ cfi->device_type = CFI_DEVICETYPE_X8;
++#endif
+ /* Set the default CFI lock/unlock addresses */
+ cfi->addr_unlock1 = 0x555;
+ cfi->addr_unlock2 = 0x2aa;
+@@ -461,6 +476,7 @@
+ map_word d, t;
+
+ d = map_read(map, addr);
++ udelay(20); //Storlink SoC
+ t = map_read(map, addr);
+
+ return map_word_equal(map, d, t);
+@@ -626,7 +642,9 @@
+ default:
+ printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
+ }
++//****** Storlink SoC ******
+ wake_up(&chip->wq);
++//**************************
+ }
+
+ #ifdef CONFIG_MTD_XIP
+@@ -940,7 +958,9 @@
+ cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+
++//****** Storlink SoC ******
+ wake_up(&chip->wq);
++//**************************
+ spin_unlock(chip->mutex);
+
+ return 0;
+@@ -1005,7 +1025,10 @@
+ */
+ unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
+ int ret = 0;
+- map_word oldd;
++//****** Storlink SoC ******
++// map_word oldd;
++ map_word oldd, tmp;
++//**************************
+ int retry_cnt = 0;
+
+ adr += chip->start;
+@@ -1037,9 +1060,15 @@
+ ENABLE_VPP(map);
+ xip_disable(map, chip, adr);
+ retry:
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG /* Unlock bypass */
++ cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++#else
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++#endif
++//**************************
+ map_write(map, datum, adr);
+ chip->state = FL_WRITING;
+
+@@ -1072,7 +1101,13 @@
+ }
+
+ if (chip_ready(map, adr))
+- break;
++ {
++ tmp = map_read(map, adr);
++ if(map_word_equal(map, tmp, datum))
++// goto op_done;
++ break;
++
++ }
+
+ /* Latency issues. Drop the lock, wait a while and retry */
+ UDELAY(map, chip, adr, 1);
+@@ -1084,8 +1119,17 @@
+ /* FIXME - should have reset delay before continuing */
+
+ if (++retry_cnt <= MAX_WORD_RETRIES)
++ {
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++ //udelay(1);
++#endif
++ udelay(1);
+ goto retry;
+-
++ }
+ ret = -EIO;
+ }
+ xip_enable(map, chip, adr);
+@@ -1171,7 +1215,14 @@
+ return 0;
+ }
+ }
+-
++//****** Storlink SoC ******
++ map_write( map, CMD(0xF0), chipstart );
++#if FORCE_FAST_PROG
++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
++//**************************
+ /* We are now aligned, write as much as possible */
+ while(len >= map_bankwidth(map)) {
+ map_word datum;
+@@ -1181,7 +1232,15 @@
+ ret = do_write_oneword(map, &cfi->chips[chipnum],
+ ofs, datum);
+ if (ret)
++ {
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ return ret;
++ }
+
+ ofs += map_bankwidth(map);
+ buf += map_bankwidth(map);
+@@ -1189,19 +1248,38 @@
+ len -= map_bankwidth(map);
+
+ if (ofs >> cfi->chipshift) {
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ chipnum ++;
+ ofs = 0;
+ if (chipnum == cfi->numchips)
+ return 0;
+ chipstart = cfi->chips[chipnum].start;
++#if FORCE_FAST_PROG
++ /* Go into unlock bypass mode for next set of chips */
++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ }
+ }
+
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
++
+ /* Write the trailing bytes if any */
+ if (len & (map_bankwidth(map)-1)) {
+ map_word tmp_buf;
+
+ retry1:
++
+ spin_lock(cfi->chips[chipnum].mutex);
+
+ if (cfi->chips[chipnum].state != FL_READY) {
+@@ -1221,7 +1299,11 @@
+ #endif
+ goto retry1;
+ }
+-
++#if FORCE_FAST_PROG
++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ tmp_buf = map_read(map, ofs + chipstart);
+
+ spin_unlock(cfi->chips[chipnum].mutex);
+@@ -1231,11 +1313,23 @@
+ ret = do_write_oneword(map, &cfi->chips[chipnum],
+ ofs, tmp_buf);
+ if (ret)
++ {
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ return ret;
+-
++ }
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ (*retlen) += len;
+ }
+
++ map_write( map, CMD(0xF0), chipstart );
+ return 0;
+ }
+
+@@ -1275,6 +1369,7 @@
+ ENABLE_VPP(map);
+ xip_disable(map, chip, cmd_adr);
+
++ map_write( map, CMD(0xF0), chip->start ); //Storlink
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+ //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+@@ -1535,6 +1630,9 @@
+ DECLARE_WAITQUEUE(wait, current);
+ int ret = 0;
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_lock(); // sl2312 share pin lock
++#endif
+ adr += chip->start;
+
+ spin_lock(chip->mutex);
+@@ -1613,6 +1711,9 @@
+ chip->state = FL_READY;
+ put_chip(map, chip, adr);
+ spin_unlock(chip->mutex);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
+ }
+
+--- /dev/null
++++ b/drivers/mtd/chips/map_serial.c
+@@ -0,0 +1,188 @@
++/*
++ * Common code to handle map devices which are simple ROM
++ * (C) 2000 Red Hat. GPL'd.
++ * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $
++ */
++
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/io.h>
++
++#include <asm/byteorder.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++
++#include <asm/hardware.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/mtd.h>
++#include <linux/init.h> //add
++#include <asm/arch/sl2312.h>
++#include <asm/arch/flash.h>
++
++static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr);
++static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
++static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++static void mapserial_nop (struct mtd_info *);
++struct mtd_info *map_serial_probe(struct map_info *map);
++
++extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
++
++static struct mtd_chip_driver mapserial_chipdrv = {
++ probe: map_serial_probe,
++ name: "map_serial",
++ module: THIS_MODULE
++};
++
++struct mtd_info *map_serial_probe(struct map_info *map)
++{
++ struct mtd_info *mtd;
++
++ mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
++ if (!mtd)
++ return NULL;
++
++ memset(mtd, 0, sizeof(*mtd));
++
++ map->fldrv = &mapserial_chipdrv;
++ mtd->priv = map;
++ mtd->name = map->name;
++ mtd->type = MTD_OTHER;
++ mtd->erase = mapserial_erase;
++ mtd->size = map->size;
++ mtd->read = mapserial_read;
++ mtd->write = mapserial_write;
++ mtd->sync = mapserial_nop;
++ mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE);
++// mtd->erasesize = 512; // page size;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++ mtd->erasesize = M25P80_SECTOR_SIZE; // block size;
++#else
++ mtd->erasesize = 0x1000; // block size;
++#endif
++
++ __module_get(THIS_MODULE);
++ //MOD_INC_USE_COUNT;
++ return mtd;
++}
++
++#define FLASH_ACCESS_OFFSET 0x00000010
++#define FLASH_ADDRESS_OFFSET 0x00000014
++#define FLASH_WRITE_DATA_OFFSET 0x00000018
++#define FLASH_READ_DATA_OFFSET 0x00000018
++
++static __u32 readflash_ctrl_reg(__u32 ofs)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ return __raw_readl(base);
++}
++
++static void writeflash_ctrl_reg(__u32 data, __u32 ofs)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ __raw_writel(data, base);
++}
++
++static int mapserial_erase_block(struct map_info *map,unsigned int block)
++{
++
++ __u32 address;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++
++ if(!m25p80_sector_erase(block, 0))
++ return (MTD_ERASE_DONE);
++#else
++ __u32 opcode;
++ __u32 count=0;
++// __u8 status;
++
++ // printk("mapserial_erase_block : erase block %d \n",block);
++// opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd;
++ opcode = 0x80000000 | 0x0200 | 0x50;
++ address = (block << 13);
++ writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET);
++ writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET);
++ opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ count++;
++ if (count > 10000)
++ {
++ return (MTD_ERASE_FAILED);
++ }
++ }
++ return (MTD_ERASE_DONE);
++#endif
++}
++
++static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct map_info *map = (struct map_info *)mtd->priv;
++ unsigned int addr;
++ int len;
++ unsigned int block;
++ unsigned int ret=0;
++
++ addr = instr->addr;
++ len = instr->len;
++ while (len > 0)
++ {
++ block = addr / mtd->erasesize;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++ ret = mapserial_erase_block(map,addr);
++#else
++ ret = mapserial_erase_block(map,block);
++#endif
++ addr = addr + mtd->erasesize;
++ len = len - mtd->erasesize;
++ }
++ return (ret);
++}
++
++static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++ struct map_info *map = (struct map_info *)mtd->priv;
++// printk("mapserial_read : \n");
++ map->copy_from(map, buf, from, len);
++ *retlen = len;
++ return 0;
++}
++
++static void mapserial_nop(struct mtd_info *mtd)
++{
++ /* Nothing to see here */
++}
++
++static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
++{
++ struct map_info *map = (struct map_info *)mtd->priv;
++// printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len);
++ //map->copy_to(map, buf, to, len);
++ map->copy_to(map, to, buf, len);
++ *retlen = len;
++ return 0;
++}
++
++int __init map_serial_init(void)
++{
++ register_mtd_chip_driver(&mapserial_chipdrv);
++ return 0;
++}
++
++static void __exit map_serial_exit(void)
++{
++ unregister_mtd_chip_driver(&mapserial_chipdrv);
++}
++
++module_init(map_serial_init);
++module_exit(map_serial_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
++MODULE_DESCRIPTION("MTD chip driver for ROM chips");
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -614,5 +614,30 @@
+
+ This selection automatically selects the map_ram driver.
+
++#***************************************************************************************
++# Storlink parallel/Serial Flash configuration
++#***************************************************************************************
++config MTD_SL2312_CFI
++ tristate "CFI Flash device mapped on SL2312"
++ depends on MTD_CFI
++ help
++ Map driver for SL2312 demo board.
++
++config MTD_SL2312_SERIAL_ATMEL
++ tristate "ATMEL Serial Flash device mapped on SL2312"
++ depends on MTD_PARTITIONS && ARCH_SL2312
++ help
++ Map driver for SL2312 demo board.
++
++config MTD_SL2312_SERIAL_ST
++ tristate "ST Serial Flash device mapped on SL2312"
++ depends on MTD_PARTITIONS && ARCH_SL2312
++ help
++ Map driver for SL2312 demo board.
++
++config SL2312_SHARE_PIN
++ tristate "Parallel Flash share pin on SL2312 ASIC"
++ depends on SL3516_ASIC
++
+ endmenu
+
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312-flash-atmel.c
+@@ -0,0 +1,554 @@
++/*
++ * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $
++ *
++ * Flash and EPROM on Hitachi Solution Engine and similar boards.
++ *
++ * (C) 2001 Red Hat, Inc.
++ *
++ * GPL'd
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++
++#include <asm/io.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <asm/hardware.h>
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/flash.h>
++#include <linux/init.h> //add
++
++
++#define g_page_addr AT45DB321_PAGE_SHIFT //321 : shift 10 ; 642 : shift 11
++#define g_chipen SERIAL_FLASH_CHIP0_EN //atmel
++
++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
++
++void address_to_page(__u32 address, __u16 *page, __u16 *offset)
++{
++ *page = address / SPAGE_SIZE;
++ *offset = address % SPAGE_SIZE;
++}
++
++static __u32 read_flash_ctrl_reg(__u32 ofs)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ return __raw_readl(base);
++}
++
++static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ __raw_writel(data, base);
++}
++
++void atmel_read_status(__u8 cmd, __u8 *data)
++{
++ __u32 opcode;
++ __u32 value;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen;
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ *data = value & 0xff;
++}
++
++void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data)
++{
++ __u32 opcode;
++ __u32 address;
++ __u32 value;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen;
++ address = (page << g_page_addr) + offset;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ *data = value & 0xff;
++}
++
++void buffer_to_main_memory(__u8 cmd, __u16 page)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++ address = (page << g_page_addr);
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++
++void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len)
++{
++ __u8 byte;
++ __u16 page, offset;
++ __u16 i;
++
++ address_to_page(address, &page, &offset);
++
++ for(i=0; i<len; i++,offset++)
++ {
++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
++ buffer [i]= byte;
++ }
++}
++
++void atmel_flash_program_page(__u32 address, __u8 *buffer, __u32 len)
++{
++ __u8 pattern;
++ __u16 page, offset;
++ __u32 i;
++
++ address_to_page(address, &page, &offset);
++ // printk("atmel_flash_program_page: offset %x len %x page %x \n", offset, len, page);
++
++ if(offset)
++ main_memory_to_buffer(MAIN_MEMORY_TO_BUFFER1,page);
++
++ for(i=0; i<len; i++,offset++)
++ {
++ pattern = buffer[i];
++ atmel_buffer_write(BUFFER1_WRITE,offset,pattern);
++ }
++
++ // printk("atmel_flash_program_page: offset %x \n", offset);
++ buffer_to_main_memory(BUFFER1_TO_MAIN_MEMORY, page);
++ // printk("atmel_flash_program_page: buffer_to_main_memory %x page\n", page);
++
++}
++
++
++void main_memory_to_buffer(__u8 cmd, __u16 page)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++ address = (page << g_page_addr);
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++void main_memory_page_program(__u8 cmd, __u16 page, __u16 offset, __u8 data)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
++ address = (page << g_page_addr) + offset;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++}
++
++void atmel_buffer_write(__u8 cmd, __u16 offset, __u8 data)
++{
++ __u32 opcode;
++ __u32 address;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
++ address = offset;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++void atmel_erase_page(__u8 cmd, __u16 page)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++ address = (page << g_page_addr);
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++void atmel_erase_block(__u8 cmd, __u16 block)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++ address = (block << 13);
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++void flash_delay(void)
++{
++ int i;
++
++ for(i=0; i<50; i++)
++ i=i;
++}
++
++
++
++
++__u32 sl2312_read32(struct map_info *map, unsigned long ofs)
++{
++
++#if 0
++ __u16 page, offset;
++ __u32 pattern;
++ __u8 byte, i;
++
++ pattern = 0;
++ address_to_page(ofs, &page, &offset);
++ for(i=0; i<4; i++, offset++)
++ {
++ pattern = pattern << 8;
++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
++//printk("sl2312_read32:: address = %08x data = %c \n",ofs,byte);
++ pattern += byte;
++ }
++ return pattern;
++#else
++ return read_flash_ctrl_reg(ofs);
++#endif
++
++}
++
++__u8 sl2312_read8(struct map_info *map, unsigned long ofs)
++{
++ __u16 page, offset;
++ __u8 byte;
++
++ address_to_page(ofs, &page, &offset);
++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
++ //printk("sl2312_read8:: address = %08x data = %c \n",ofs,byte);
++ return byte;
++
++}
++
++void sl2312_write32(struct map_info *map, __u32 d, unsigned long ofs)
++{
++#if 0
++ __u16 page, offset;
++ __u8 byte, i;
++
++ address_to_page(ofs, &page, &offset);
++ for(i=0; i<4; i++, offset++)
++ {
++ byte = d & 0xff;
++ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, byte);
++ d = d >> 8;
++//printk("sl2312_write32:: address = %08x data = %c \n",ofs,byte);
++ }
++#else
++ write_flash_ctrl_reg(ofs, d);
++#endif
++}
++
++void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs)
++{
++ __u16 page, offset;
++
++ address_to_page(ofs, &page, &offset);
++ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d);
++//printk("sl2312_write8:: address = %08x data = %c \n",ofs,d);
++
++}
++
++void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
++{
++ __u32 size;
++ __u8 *buffer;
++ __u32 length;//i, j,
++
++ //printk("sl2312_copy_from:: address = %08x datalen = %d \n",ofs,len);
++
++ length = len;
++ buffer = (__u8 *)buf;
++ while(len)
++ {
++ size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
++ if(size > len)
++ size = len;
++ atmel_flash_read_page(ofs, buffer, size);
++ buffer+=size;
++ ofs+=size;
++ len -= size;
++ }
++
++#if 0
++ buffer = (__u8 *)buf;
++ for(i=0; i<length; i+=16)
++ {
++ for(j=0; j<16; j++,buffer++)
++ {
++ if((i*16+j)<length)
++ printk("%x ",(int)*buffer);
++ }
++ printk("\n");
++ }
++
++ printk("\n");
++#endif
++
++}
++
++
++void sl2312_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
++{
++ __u32 size;
++ __u8 *buffer;
++
++ buffer = (__u8 *)buf;
++ //printk("sl2312_copy_to:offset %x len %x \n", ofs, len);
++// printk("sl2312_copy_to:buf is %x \n", (int)buf);
++
++ while(len)
++ {
++ size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
++ if(size > len)
++ size = len;
++ atmel_flash_program_page(ofs, buffer, size);
++ buffer+=size;
++ ofs+=size;
++ len-=size;
++ }
++
++
++}
++
++
++static struct mtd_info *serial_mtd;
++
++static struct mtd_partition *parsed_parts;
++
++static struct map_info sl2312_serial_map = {
++// name: "SL2312 serial flash",
++// size: 4194304, //0x400000,
++// //buswidth: 4,
++// bankwidth: 4,
++// phys: SL2312_FLASH_BASE,
++//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
++// //read32: sl2312_read32,
++// //read8: sl2312_read8,
++// copy_from: sl2312_copy_from,
++// //write8: sl2312_write8,
++// //write32: sl2312_write32,
++// read: sl2312_read32,
++// write: sl2312_write32,
++// copy_to: sl2312_copy_to
++//#endif
++ .name = "SL2312 serial flash",
++ .size = 4194304, //0x400000,
++ //buswidth: 4,
++ .bankwidth = 4,
++ .phys = SL2312_FLASH_BASE,
++#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
++ //read32: sl2312_read32,
++ //read8: sl2312_read8,
++ .copy_from = sl2312_copy_from,
++ //write8: sl2312_write8,
++ //write32: sl2312_write32,
++ .read = sl2312_read32,
++ .write = sl2312_write32,
++ .copy_to = sl2312_copy_to
++#endif
++};
++
++
++
++static struct mtd_partition sl2312_partitions[] = {
++
++
++ ///* boot code */
++ //{ name: "bootloader", offset: 0x00000000, size: 0x20000, },
++ ///* kernel image */
++ //{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 },
++ ///* All else is writable (e.g. JFFS) */
++ //{ name: "user data", offset: 0x00300000, size: 0x00100000, },
++ /* boot code */
++ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
++ /* kernel image */
++ { .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 },
++ /* All else is writable (e.g. JFFS) */
++ { .name = "user data", .offset = 0x00100000, .size = 0x00300000, },
++
++
++};
++
++
++
++static int __init init_sl2312_maps(void)
++{
++ int nr_parts = 0;
++ struct mtd_partition *parts;
++
++ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
++ if (!serial_mtd)
++ return NULL;
++
++ memset(serial_mtd, 0, sizeof(struct mtd_info));
++ //sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++ //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE;
++ sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
++ if (!sl2312_serial_map.virt) {
++ printk(" failed to ioremap \n");
++ return -EIO;
++ }
++ serial_mtd = do_map_probe("map_serial", &sl2312_serial_map);
++ if (serial_mtd) {
++ //serial_mtd->module = THIS_MODULE;
++ serial_mtd->owner = THIS_MODULE;
++
++ }
++
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
++ if (nr_parts > 0)
++ printk(KERN_NOTICE "Found RedBoot partition table.\n");
++ else if (nr_parts < 0)
++ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
++#else
++ parsed_parts = sl2312_partitions;
++ parts = sl2312_partitions;
++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts);
++#endif /* CONFIG_MTD_REDBOOT_PARTS */
++
++ if (nr_parts > 0)
++ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
++ else
++ add_mtd_device(serial_mtd);
++
++ return 0;
++}
++
++static void __exit cleanup_sl2312_maps(void)
++{
++ if (parsed_parts)
++ del_mtd_partitions(serial_mtd);
++ else
++ del_mtd_device(serial_mtd);
++
++ map_destroy(serial_mtd);
++
++
++}
++
++module_init(init_sl2312_maps);
++module_exit(cleanup_sl2312_maps);
++
++
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
++MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
++
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312-flash-cfi.c
+@@ -0,0 +1,370 @@
++/*======================================================================
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++======================================================================*/
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/string.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/system.h>
++#include <asm/arch/sl2312.h>
++#include <linux/mtd/kvctl.h>
++#include "sl2312_flashmap.h"
++
++
++//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **);
++
++/* the base address of FLASH control register */
++#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
++#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
++
++/* define read/write register utility */
++#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
++#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
++
++/* the offset of FLASH control register */
++enum EMAC_REGISTER {
++ FLASH_ID = 0x0000,
++ FLASH_STATUS = 0x0008,
++ FLASH_TYPE = 0x000c,
++ FLASH_ACCESS = 0x0020,
++ FLASH_ADDRESS = 0x0024,
++ FLASH_DATA = 0x0028,
++ FLASH_TIMING = 0x002c,
++};
++
++//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
++//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
++
++//#define FLASH_PART_SIZE 8388608
++
++static unsigned int flash_indirect_access = 0;
++
++#ifdef CONFIG_SL2312_SHARE_PIN
++static unsigned int chip_en = 0x00000000;
++
++void sl2312flash_enable_parallel_flash(void)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val & 0xfffffffd;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++ return;
++}
++
++void sl2312flash_disable_parallel_flash(void)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val | 0x00000002;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++ return;
++}
++#endif
++
++
++static struct map_info sl2312flash_map =
++{
++ name: "SL2312 CFI Flash",
++ size: FLASH_SIZE,
++ bankwidth: 2,
++ //bankwidth: 1, //for 8 bits width
++ phys: SL2312_FLASH_BASE,
++};
++
++static struct mtd_info *mtd;
++#if 0
++static struct mtd_partition sl2312_partitions[] = {
++ /* boot code */
++ {
++ name: "bootloader",
++ offset: 0x00000000,
++ size: 0x20000,
++// mask_flags: MTD_WRITEABLE,
++ },
++ /* kernel image */
++ {
++ name: "kerel image",
++ offset: 0x00020000,
++ size: 0x2E0000
++ },
++ /* All else is writable (e.g. JFFS) */
++ {
++ name: "user data",
++ offset: 0x00300000,
++ size: 0x00100000,
++ }
++};
++#endif
++
++
++
++static int __init sl2312flash_init(void)
++{
++ struct mtd_partition *parts;
++ int nr_parts = 0;
++ int ret;
++#ifndef CONFIG_SL2312_SHARE_PIN
++ unsigned int reg_val;
++#endif
++
++ printk("SL2312 MTD Driver Init.......\n");
++
++#ifndef CONFIG_SL2312_SHARE_PIN
++ /* enable flash */
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val & 0xfffffffd;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++#else
++ sl2312flash_enable_parallel_flash(); /* enable Parallel FLASH */
++#endif
++ FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */
++ ret = FLASH_READ_REG(FLASH_ACCESS);
++ if (ret == 0x00004000)
++ {
++ flash_indirect_access = 0; /* parallel flash direct access */
++ }
++ else
++ {
++ flash_indirect_access = 1; /* parallel flash indirect access */
++ }
++
++ /*
++ * Also, the CFI layer automatically works out what size
++ * of chips we have, and does the necessary identification
++ * for us automatically.
++ */
++#ifdef CONFIG_GEMINI_IPI
++ sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++#else
++ sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++#endif
++ //printk("sl2312flash_map.virt = %08x\n",(unsigned int)sl2312flash_map.virt);
++
++// simple_map_init(&sl2312flash_map);
++
++ mtd = do_map_probe("cfi_probe", &sl2312flash_map);
++ if (!mtd)
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
++#endif
++ return -ENXIO;
++ }
++ mtd->owner = THIS_MODULE;
++// mtd->erase = flash_erase;
++// mtd->read = flash_read;
++// mtd->write = flash_write;
++
++ parts = sl2312_partitions;
++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++ ret = add_mtd_partitions(mtd, parts, nr_parts);
++ /*If we got an error, free all resources.*/
++ if (ret < 0) {
++ del_mtd_partitions(mtd);
++ map_destroy(mtd);
++ }
++#ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
++#endif
++ printk("SL2312 MTD Driver Init Success ......\n");
++ return ret;
++}
++
++static void __exit sl2312flash_exit(void)
++{
++ if (mtd) {
++ del_mtd_partitions(mtd);
++ map_destroy(mtd);
++ }
++
++ if (sl2312flash_map.virt) {
++ iounmap((void *)sl2312flash_map.virt);
++ sl2312flash_map.virt = 0;
++ }
++}
++
++char chrtohex(char c)
++{
++ char val;
++ if ((c >= '0') && (c <= '9'))
++ {
++ val = c - '0';
++ return val;
++ }
++ else if ((c >= 'a') && (c <= 'f'))
++ {
++ val = 10 + (c - 'a');
++ return val;
++ }
++ else if ((c >= 'A') && (c <= 'F'))
++ {
++ val = 10 + (c - 'A');
++ return val;
++ }
++ printk("<1>Error number\n");
++ return 0;
++}
++
++
++int get_vlaninfo(vlaninfo* vlan)
++{
++ vctl_mheader head;
++ vctl_entry entry;
++ struct mtd_info *mymtd=NULL;
++ int i, j, loc = 0;
++ char *payload=0, *tmp1, *tmp2, tmp3[9];
++ size_t retlen;
++
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_enable_parallel_flash();
++ #endif
++ for(i=0;i<MAX_MTD_DEVICES;i++)
++ {
++ mymtd=get_mtd_device(NULL,i);
++ // printk("mymtd->name: %s\n", mymtd->name);
++ if(mymtd && !strcmp(mymtd->name,"VCTL"))
++ {
++ // printk("%s\n", mymtd->name);
++ break;
++ }
++ }
++ if( i >= MAX_MTD_DEVICES)
++ {
++ printk("Can't find version control\n");
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ return 0;
++ }
++
++ if (!mymtd | !mymtd->read)
++ {
++ printk("<1>Can't read Version Configuration\n");
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ return 0;
++ }
++
++ mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head);
++ // printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]);
++ // printk("entry number: %x\n", head.entry_num);
++ if ( strncmp(head.header, "FLFM", 4) )
++ {
++ printk("VCTL is a erase block\n");
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ return 0;
++ }
++ loc += retlen;
++ for (i = 0; i < head.entry_num; i++)
++ {
++ mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry);
++ // printk("type: %x\n", entry.type);
++ // printk("size: %x\n", entry.size);
++ strncpy(tmp3, entry.header, 4);
++ if (entry.type == VCT_VLAN)
++ {
++ for (j = 0; j < 6 ; j++)
++ {
++ vlan[0].mac[j] = 0;
++ vlan[1].mac[j] = 0;
++ }
++ vlan[0].vlanid = 1;
++ vlan[1].vlanid = 2;
++ vlan[0].vlanmap = 0x7F;
++ vlan[1].vlanmap = 0x80;
++
++ payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL);
++ loc += VCTL_ENTRY_LEN;
++ mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload);
++ // printk("%s\n", payload);
++ tmp1 = strstr(payload, "MAC1:");
++ tmp2 = strstr(payload, "MAC2:");
++ if(!tmp1||!tmp2){
++ kfree(payload);
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ printk("Error VCTL format!!\n");
++ return 0;
++ }
++ tmp1 += 7;
++ tmp2 += 7;
++
++
++ for (j = 0; j < 6; j++)
++ {
++ vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]);
++ vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]);
++ }
++ tmp1 = strstr(payload, "ID1:");
++ tmp2 = strstr(payload, "ID2:");
++ tmp1 += 4;
++ tmp2 += 4;
++ vlan[0].vlanid = tmp1[0] - '0';
++ vlan[1].vlanid = tmp2[0] - '0';
++ tmp1 = strstr(payload, "MAP1:");
++ tmp2 = strstr(payload, "MAP2:");
++ tmp1 += 7;
++ tmp2 += 7;
++ vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]);
++ vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]);
++ // printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]);
++ // printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]);
++ break;
++ }
++ loc += entry.size;
++ }
++ if ( entry.type == VCT_VLAN )
++ {
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ kfree(payload);
++ return 1;
++ }
++ if (i >= head.entry_num)
++ printk("Can't find vlan information\n");
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ return 0;
++}
++
++EXPORT_SYMBOL(get_vlaninfo);
++
++
++module_init(sl2312flash_init);
++module_exit(sl2312flash_exit);
++
++MODULE_AUTHOR("Storlink Ltd");
++MODULE_DESCRIPTION("CFI map driver");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312-flash-m25p80.c
+@@ -0,0 +1,498 @@
++/*
++ * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $
++ *
++ * Flash and EPROM on Hitachi Solution Engine and similar boards.
++ *
++ * (C) 2001 Red Hat, Inc.
++ *
++ * GPL'd
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++
++#include <asm/io.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <asm/hardware.h>
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/flash.h>
++#include <linux/init.h> //add
++#define g_chipen SERIAL_FLASH_CHIP0_EN //ST
++
++//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en);
++static void m25p80_write_cmd(__u8 cmd, __u32 schip_en);
++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
++
++
++static __u32 read_flash_ctrl_reg(__u32 ofs)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ return __raw_readl(base);
++}
++
++static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ __raw_writel(data, base);
++}
++
++static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en)
++{
++ __u32 opcode,status;
++ __u32 value;
++
++ //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ;
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(status&0x80000000)
++ {
++ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ *data = value & 0xff;
++}
++
++static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en)
++{
++ __u32 opcode;
++ __u32 status;
++ __u32 tmp;
++ int res = FLASH_ERR_OK;
++ //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data;
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ //middle delay_ms(130);
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ if((status&0x02)==0x02)
++ {
++ //middle delay_ms(100);
++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++ }
++
++
++ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
++ ////middle delay_ms(10);
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data);
++
++ //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //while(status!=data)
++ //{
++ // status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ // //middle delay_ms(10);
++ //}
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++ opcode|=g_chipen;
++
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //while(status&0xfd)
++ while(status&0x01)
++ {
++ //if((status&0x9c)!=0)
++ // printf(" m25p80_page_program Protect Status = %x\n",status);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ flash_delay();
++ schedule();
++ //middle delay_ms(50);
++ }
++ //printf("status = %x, data = %x\n",status,data);
++ if((status&0x02)==0x02)
++ {
++ //middle delay_ms(100);
++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++ }
++ //};//while (len > 0)
++ return res;
++}
++
++void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
++{
++// __u32 size;
++ __u8 *buffer;
++ __u32 length;//i, j,
++
++ length = len;
++ buffer = (__u8 *)buf;
++ while(len)
++ {
++ m25p80_read(ofs, buffer, g_chipen);
++ buffer++;
++ ofs++;
++ len --;
++ } ;
++
++}
++
++__u32 m25p80_read32(struct map_info *map, unsigned long ofs)
++{
++
++ return read_flash_ctrl_reg(ofs);
++
++
++}
++
++void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs)
++{
++
++ write_flash_ctrl_reg(ofs, d);
++
++}
++
++void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
++{
++ __u32 size, i, ret;
++
++ while(len > 0)
++ {
++ if(len >= M25P80_PAGE_SIZE)
++ size = M25P80_PAGE_SIZE;
++ else
++ size = len;
++
++ for(i=0;i<size;i++)
++ {
++ ret = m25p80_page_program( (ofs+i), (buf+i), g_chipen);
++ }
++ buf+=M25P80_PAGE_SIZE;
++ ofs+=M25P80_PAGE_SIZE;
++ len-=M25P80_PAGE_SIZE;
++
++ };
++
++
++}
++
++static struct mtd_info *serial_mtd;
++
++static struct mtd_partition *parsed_parts;
++
++static struct map_info m25p80_map = {
++
++ .name = "SL2312 serial flash m25p80",
++ .size = 1048576, //0x100000,
++ //buswidth: 4,
++ .bankwidth = 4,
++ .phys = SL2312_FLASH_BASE,
++#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
++ .copy_from = m25p80_copy_from,
++ .read = m25p80_read32,
++ .write = m25p80_write32,
++ .copy_to = m25p80_copy_to
++#endif
++};
++
++
++
++static struct mtd_partition m25p80_partitions[] = {
++
++ /* boot code */
++ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
++ /* kernel image */
++ { .name = "kerel image", .offset = 0x000020000, .size = 0xC0000 },
++ /* All else is writable (e.g. JFFS) */
++ { .name = "user data", .offset = 0x000E0000, .size = 0x00010000, },
++
++
++};
++
++void flash_delay()
++{
++ int i,j;
++ for(i=0;i<0x100;i++)
++ j=i*3+5;
++}
++
++int m25p80_sector_erase(__u32 address, __u32 schip_en)
++{
++ __u32 opcode;
++ __u32 status;
++ __u32 tmp;
++ int res = FLASH_ERR_OK;
++ //printf("\n-->m25p80_sector_erase");
++ if(address >= FLASH_START)
++ address-=FLASH_START;
++
++ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
++ //printf("\n m25p80_sector_erase : after we-en");
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ #ifdef MIDWAY_DIAG
++ opcode|=schip_en;
++ #endif
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++ #ifdef MIDWAY_DIAG
++ opcode|=schip_en;
++ #endif
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //while(status&0xfd)
++ while(status&0x01)
++ {
++ //if((status&0x9c)!=0)
++ // printf(" m25p80_sector_erase Protect Status = %x\n",status);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ flash_delay();
++ schedule();
++ //middle delay_ms(50);
++ }
++ if((status&0x02)==0x02)
++ {
++ //middle delay_ms(100);
++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++ }
++ //printf("\n<--m25p80_sector_erase");
++ return res;
++}
++
++static void m25p80_write_cmd(__u8 cmd, __u32 schip_en)
++{
++ __u32 opcode,tmp;
++ __u32 status;
++
++
++
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd;
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ //////
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ //middle delay_ms(130);
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //printf("\ncmd =%x status = %x",cmd,status);
++ if(cmd==M25P80_WRITE_ENABLE)
++ {
++ //printf("\n**-->enable** status = %x",status);
++ //middle delay_ms(100);
++ while((status&0x03) != 2)
++ {
++ //if((status&0x9c)!=0)
++ // printf(" M25P80_WRITE_ENABLE Protect Status = %x\n",status);
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ //flash_delay();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //printf("\n**enable** status = %x",status);
++ flash_delay();
++ schedule();
++ //middle delay_ms(100);
++ }
++ }
++ else if(cmd==M25P80_WRITE_DISABLE)
++ {
++ //while((status&0x03) == 2)
++ // printf("\n**disable** status = %x",status);
++ //middle delay_ms(100);
++ while((status&0x03) != 0)
++ {
++ //m25p80_write_status((status&0xfd),schip_en);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //printf("\n**disable** status = %x",status);
++ flash_delay();
++ schedule();
++ //middle delay_ms(50);
++ }
++ }
++ else
++ {
++ //while((status&0x01) !=0)
++ while((status&0x01) !=0)
++ {
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ flash_delay();
++ schedule();
++ //middle delay_ms(50);
++ }
++ }
++ //////
++
++ //printf("\n<-- status = %x",status);
++}
++
++static int __init init_sl2312_m25p80(void)
++{
++ int nr_parts = 0;
++ struct mtd_partition *parts;
++
++ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
++ if (!serial_mtd)
++ return NULL;
++
++ memset(serial_mtd, 0, sizeof(struct mtd_info));
++ m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
++ if (!m25p80_map.virt) {
++ printk(" failed to ioremap \n");
++ return -EIO;
++ }
++ serial_mtd = do_map_probe("map_serial", &m25p80_map);
++ if (serial_mtd) {
++ serial_mtd->owner = THIS_MODULE;
++
++ }
++
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
++ if (nr_parts > 0)
++ printk(KERN_NOTICE "Found RedBoot partition table.\n");
++ else if (nr_parts < 0)
++ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
++#else
++ parsed_parts = m25p80_partitions;
++ parts = m25p80_partitions;
++ nr_parts = sizeof(m25p80_partitions)/sizeof(*parts);
++ nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts);
++#endif /* CONFIG_MTD_REDBOOT_PARTS */
++
++ if (nr_parts > 0)
++ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
++ else
++ add_mtd_device(serial_mtd);
++
++ return 0;
++}
++
++static void __exit cleanup_sl2312_m25p80(void)
++{
++ if (parsed_parts)
++ del_mtd_partitions(serial_mtd);
++ else
++ del_mtd_device(serial_mtd);
++
++ map_destroy(serial_mtd);
++
++
++}
++
++module_init(init_sl2312_m25p80);
++module_exit(cleanup_sl2312_m25p80);
++
++
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
++MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
++
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312_flashmap.h
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them. If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ * - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
++ { name: "kernel", offset: 0x00020000, size: 0x00100000, },
++ { name: "rootfs", offset: 0x00120000, size: 0x00500000, },
++ { name: "rootfs_data", offset: 0x00620000, size: 0x001A0000, },
++ { name: "VCTL", offset: 0x007C0000, size: 0x00010000, },
++ { name: "cfg", offset: 0x007D0000, size: 0x00020000, },
++ { name: "FIS directory", offset: 0x007F0000, size: 0x00010000, }
++};
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312_flashmap.h.16MB
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them. If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ * - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
++ { name: "Kernel", offset: 0x00020000, size: 0x00300000, },
++ { name: "Ramdisk", offset: 0x00320000, size: 0x00600000, },
++ { name: "Application", offset: 0x00920000, size: 0x00600000, },
++ { name: "VCTL", offset: 0x00F20000, size: 0x00020000, },
++ { name: "CurConf", offset: 0x00F40000, size: 0x000A0000, },
++ { name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, }
++};
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312_flashmap.h.8MB
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them. If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ * - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
++ { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
++ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
++ { name: "Application", offset: 0x004A0000, size: 0x00300000, },
++ { name: "VCTL", offset: 0x007A0000, size: 0x00020000, },
++ { name: "CurConf", offset: 0x007C0000, size: 0x00020000, },
++ { name: "FIS directory", offset: 0x007E0000, size: 0x00020000, }
++};
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -59,6 +59,77 @@
+ enum mtd_file_modes mode;
+ };
+
++/***********************************************************************
++/* Storlink SoC -- flash
++/***********************************************************************/
++#ifdef CONFIG_SL2312_SHARE_PIN
++unsigned int share_pin_flag=0; // bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE
++unsigned int check_sleep_flag=0; // bit0:FLASH, bit1:IDE
++static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED;
++EXPORT_SYMBOL(share_pin_flag);
++int dbg=0;
++DECLARE_WAIT_QUEUE_HEAD(wq);
++extern struct wait_queue_head_t *flash_wait;
++unsigned int flash_req=0;
++void mtd_lock()
++{
++ struct task_struct *tsk = current;
++ unsigned int value ;
++ unsigned long flags;
++ flash_req = 1;
++ DECLARE_WAITQUEUE(wait, tsk);
++ add_wait_queue(&wq, &wait);
++ for(;;)
++ {
++ set_task_state(tsk, TASK_INTERRUPTIBLE);
++ spin_lock_irqsave(&sl2312_flash_lock,flags);
++ if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) {
++ spin_unlock_irqrestore(&sl2312_flash_lock, flags);
++ check_sleep_flag |= 0x00000001;
++ if(dbg)
++ printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag);
++ wake_up_interruptible(&flash_wait);
++ schedule();
++ }
++ else {
++ check_sleep_flag &= ~0x01;
++ share_pin_flag |= 0x00000001 ; // set share pin flag
++ spin_unlock_irqrestore(&sl2312_flash_lock, flags);
++ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++ value = value & (~PFLASH_SHARE_BIT) ;
++ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++ if(dbg)
++ printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag);
++ tsk->state = TASK_RUNNING;
++ remove_wait_queue(&wq, &wait);
++ return ;
++ }
++ }
++}
++
++void mtd_unlock()
++{
++ unsigned int value ;
++ unsigned long flags;
++
++ spin_lock_irqsave(&sl2312_flash_lock,flags); // Disable IRQ
++ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++ value = value | PFLASH_SHARE_BIT ; // Disable Flash PADs
++ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++ share_pin_flag &= ~(0x00000001); // clear share pin flag
++ check_sleep_flag &= ~0x00000001;
++ spin_unlock_irqrestore(&sl2312_flash_lock, flags); // Restore IRQ
++ if (check_sleep_flag & 0x00000002)
++ {
++ check_sleep_flag &= ~(0x00000002);
++ wake_up_interruptible(&flash_wait);
++ }
++ DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n");
++ flash_req = 0;
++}
++#endif
++/***********************************************************************/
++
+ static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
+ {
+ struct mtd_file_info *mfi = file->private_data;
+@@ -162,13 +233,21 @@
+ int len;
+ char *kbuf;
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_lock(); // sl2312 share pin lock
++#endif
++
+ DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+
+ if (*ppos + count > mtd->size)
+ count = mtd->size - *ppos;
+
+- if (!count)
++ if (!count){
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return 0;
++ }
+
+ /* FIXME: Use kiovec in 2.5 to lock down the user's buffers
+ and pass them directly to the MTD functions */
+@@ -178,8 +257,12 @@
+ else
+ kbuf=kmalloc(count, GFP_KERNEL);
+
+- if (!kbuf)
++ if (!kbuf) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -ENOMEM;
++ }
+
+ while (count) {
+
+@@ -224,6 +307,9 @@
+ *ppos += retlen;
+ if (copy_to_user(buf, kbuf, retlen)) {
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
+ }
+ else
+@@ -235,13 +321,19 @@
+ count = 0;
+ }
+ else {
+- kfree(kbuf);
++ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
+ }
+
+ }
+
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return total_retlen;
+ } /* mtd_read */
+
+@@ -255,24 +347,40 @@
+ int ret=0;
+ int len;
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_lock(); // sl2312 share pin lock
++#endif
++
+ DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+
+- if (*ppos == mtd->size)
++ if (*ppos == mtd->size){
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -ENOSPC;
++ }
+
+ if (*ppos + count > mtd->size)
+ count = mtd->size - *ppos;
+
+- if (!count)
++ if (!count){
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return 0;
++ }
+
+ if (count > MAX_KMALLOC_SIZE)
+ kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
+ else
+ kbuf=kmalloc(count, GFP_KERNEL);
+
+- if (!kbuf)
++ if (!kbuf) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -ENOMEM;
++ }
+
+ while (count) {
+
+@@ -283,6 +391,9 @@
+
+ if (copy_from_user(kbuf, buf, len)) {
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
+ }
+
+@@ -323,11 +434,17 @@
+ }
+ else {
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
+ }
+ }
+
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return total_retlen;
+ } /* mtd_write */
+
+@@ -381,36 +498,67 @@
+ u_long size;
+ struct mtd_info_user info;
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_lock(); // sl2312 share pin lock
++#endif
++
+ DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+
+ size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
+ if (cmd & IOC_IN) {
+ if (!access_ok(VERIFY_READ, argp, size))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ }
+ if (cmd & IOC_OUT) {
+ if (!access_ok(VERIFY_WRITE, argp, size))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ }
+
+ switch (cmd) {
+ case MEMGETREGIONCOUNT:
+ if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ break;
+
+ case MEMGETREGIONINFO:
+ {
+ struct region_info_user ur;
+
+- if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
++ if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+- if (ur.regionindex >= mtd->numeraseregions)
++ if (ur.regionindex >= mtd->numeraseregions) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EINVAL;
++ }
+ if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
+- sizeof(struct mtd_erase_region_info)))
++ sizeof(struct mtd_erase_region_info))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ break;
+ }
+
+@@ -433,7 +581,12 @@
+ struct erase_info *erase;
+
+ if(!(file->f_mode & 2))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EPERM;
++ }
+
+ erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
+ if (!erase)
+@@ -447,6 +600,9 @@
+ if (copy_from_user(&erase->addr, argp,
+ sizeof(struct erase_info_user))) {
+ kfree(erase);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
+ }
+ erase->mtd = mtd;
+@@ -484,14 +640,26 @@
+ struct mtd_oob_buf buf;
+ struct mtd_oob_ops ops;
+
+- if(!(file->f_mode & 2))
++ if(!(file->f_mode & 2)) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EPERM;
++ }
+
+- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
++ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+- if (buf.length > 4096)
++ if (buf.length > 4096) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EINVAL;
++ }
+
+ if (!mtd->write_oob)
+ ret = -EOPNOTSUPP;
+@@ -499,8 +667,12 @@
+ ret = access_ok(VERIFY_READ, buf.ptr,
+ buf.length) ? 0 : EFAULT;
+
+- if (ret)
++ if (ret) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
++ }
+
+ ops.ooblen = buf.length;
+ ops.ooboffs = buf.start & (mtd->oobsize - 1);
+@@ -536,19 +708,35 @@
+ struct mtd_oob_buf buf;
+ struct mtd_oob_ops ops;
+
+- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
++ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+- if (buf.length > 4096)
++ if (buf.length > 4096) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EINVAL;
++ }
+
+- if (!mtd->read_oob)
++ if (!mtd->read_oob) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ ret = -EOPNOTSUPP;
++ }
+ else
+ ret = access_ok(VERIFY_WRITE, buf.ptr,
+ buf.length) ? 0 : -EFAULT;
+- if (ret)
++ if (ret) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
++ }
+
+ ops.ooblen = buf.length;
+ ops.ooboffs = buf.start & (mtd->oobsize - 1);
+@@ -580,7 +768,12 @@
+ struct erase_info_user info;
+
+ if (copy_from_user(&info, argp, sizeof(info)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+ if (!mtd->lock)
+ ret = -EOPNOTSUPP;
+@@ -594,7 +787,12 @@
+ struct erase_info_user info;
+
+ if (copy_from_user(&info, argp, sizeof(info)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+ if (!mtd->unlock)
+ ret = -EOPNOTSUPP;
+@@ -629,11 +827,21 @@
+ loff_t offs;
+
+ if (copy_from_user(&offs, argp, sizeof(loff_t)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ if (!mtd->block_isbad)
+ ret = -EOPNOTSUPP;
+ else
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return mtd->block_isbad(mtd, offs);
++ }
+ break;
+ }
+
+@@ -642,11 +850,21 @@
+ loff_t offs;
+
+ if (copy_from_user(&offs, argp, sizeof(loff_t)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ if (!mtd->block_markbad)
+ ret = -EOPNOTSUPP;
+ else
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return mtd->block_markbad(mtd, offs);
++ }
+ break;
+ }
+
+@@ -654,8 +872,12 @@
+ case OTPSELECT:
+ {
+ int mode;
+- if (copy_from_user(&mode, argp, sizeof(int)))
++ if (copy_from_user(&mode, argp, sizeof(int))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+ mfi->mode = MTD_MODE_NORMAL;
+
+@@ -670,7 +892,12 @@
+ {
+ struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
+ if (!buf)
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -ENOMEM;
++ }
+ ret = -EOPNOTSUPP;
+ switch (mfi->mode) {
+ case MTD_MODE_OTP_FACTORY:
+@@ -701,12 +928,24 @@
+ {
+ struct otp_info info;
+
+- if (mfi->mode != MTD_MODE_OTP_USER)
++ if (mfi->mode != MTD_MODE_OTP_USER) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EINVAL;
+- if (copy_from_user(&info, argp, sizeof(info)))
++ }
++ if (copy_from_user(&info, argp, sizeof(info))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
+- if (!mtd->lock_user_prot_reg)
++ }
++ if (!mtd->lock_user_prot_reg) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EOPNOTSUPP;
++ }
+ ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
+ break;
+ }
+@@ -742,8 +981,12 @@
+ break;
+
+ case MTD_MODE_RAW:
+- if (!mtd->read_oob || !mtd->write_oob)
++ if (!mtd->read_oob || !mtd->write_oob) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EOPNOTSUPP;
++ }
+ mfi->mode = arg;
+
+ case MTD_MODE_NORMAL:
+@@ -766,6 +1009,10 @@
+ ret = -ENOTTY;
+ }
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
++
+ return ret;
+ } /* memory_ioctl */
+
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -44,6 +44,13 @@
+ This enables the driver for the autronix autcpu12 board to
+ access the SmartMediaCard.
+
++config MTD_NAND_SL2312
++ tristate "NAND Flash device on Storlink board"
++ depends on ARM && MTD_NAND && ARCH_SL2312
++ help
++ This enables the driver for the Storlink board to
++ access the nand device.
++
+ config MTD_NAND_EDB7312
+ tristate "Support for Cirrus Logic EBD7312 evaluation board"
+ depends on ARCH_EDB7312
+--- /dev/null
++++ b/drivers/mtd/nand/sl2312-flash-nand.c
+@@ -0,0 +1,2287 @@
++/*
++ * drivers/mtd/sl2312.c
++ *
++ * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $
++ *
++ * Copyright (C) 2001 Toshiba Corporation
++ *
++ * 2003 (c) MontaVista Software, Inc. This file is licensed under
++ * the terms of the GNU General Public License version 2. This program
++ * is licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ *
++ */
++
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++#include <asm/hardware.h>
++#include <asm/arch/sl2312.h>
++#include "sl2312-flash-nand.h"
++
++
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++#include <linux/mtd/compatmac.h>
++#include <linux/interrupt.h>
++#include <linux/bitops.h>
++
++
++/*
++ * NAND low-level MTD interface functions
++ */
++static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
++static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
++static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
++
++static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
++static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
++static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
++static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
++ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
++static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
++ unsigned long count, loff_t to, size_t * retlen);
++static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
++ unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
++static void sl2312_nand_sync (struct mtd_info *mtd);
++static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt);
++static int sl2312_nand_erase_block(struct mtd_info *mtd, int page);
++
++/*
++ * MTD structure for sl2312 NDFMC
++ */
++static struct mtd_info *sl2312_mtd = NULL;
++static int nand_page=0,nand_col=0;
++
++/* Define default oob placement schemes for large and small page devices */
++static struct nand_oobinfo nand_oob_8 = {
++ .useecc = MTD_NANDECC_AUTOPLACE,
++ .eccbytes = 3,
++ .eccpos = {0, 1, 2},
++ .oobfree = { {3, 2}, {6, 2} }
++};
++
++static struct nand_oobinfo nand_oob_16 = {
++ .useecc = MTD_NANDECC_AUTOPLACE,
++ .eccbytes = 6,
++ .eccpos = {0, 1, 2, 3, 6, 7},
++ .oobfree = { {8, 8} }
++};
++
++static struct nand_oobinfo nand_oob_64 = {
++ .useecc = MTD_NANDECC_AUTOPLACE,
++ .eccbytes = 24,
++ .eccpos = {
++ 40, 41, 42, 43, 44, 45, 46, 47,
++ 48, 49, 50, 51, 52, 53, 54, 55,
++ 56, 57, 58, 59, 60, 61, 62, 63},
++ .oobfree = { {2, 38} }
++};
++
++
++/*
++ * Define partitions for flash device
++ */
++/* the base address of FLASH control register */
++#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
++#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
++//#define SL2312_FLASH_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_BASE))
++#define SL2312_FLASH_BASE_ADDR FLASH_VADDR(SL2312_FLASH_BASE)
++static unsigned int CHIP_EN;
++/* define read/write register utility */
++//#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
++//#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
++//#define FLASH_READ_DATA(offset) (__raw_readb(offset+SL2312_FLASH_BASE_ADDR))
++//#define FLASH_WRITE_DATA(offset,val) (__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR))
++
++unsigned int FLASH_READ_REG(unsigned int addr)
++{
++ unsigned int *base;
++ unsigned int data;
++
++ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
++ data = *base;
++ return (data);
++}
++
++void FLASH_WRITE_REG(unsigned int addr,unsigned int data)
++{
++ unsigned int *base;
++
++ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
++ *base = data;
++ return;
++}
++
++unsigned int FLASH_READ_DATA(unsigned int addr)
++{
++ unsigned char *base;
++ unsigned int data;
++
++ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
++ data = *base;
++ return (data);
++}
++
++void FLASH_WRITE_DATA(unsigned int addr,unsigned int data)
++{
++ unsigned char *base;
++
++ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
++ *base = data;
++ return;
++}
++
++/* the offset of FLASH control register */
++enum NFLASH_REGISTER {
++ NFLASH_ID = 0x0000,
++ NFLASH_STATUS = 0x0008,
++ NFLASH_TYPE = 0x000c,
++ NFLASH_ACCESS = 0x0030,
++ NFLASH_COUNT = 0x0034,
++ NFLASH_CMD_ADDR = 0x0038,
++ NFLASH_ADDRESS = 0x003C,
++ NFLASH_DATA = 0x0040,
++ NFLASH_TIMING = 0x004C,
++ NFLASH_ECC_STATUS = 0x0050,
++ NFLASH_ECC_CONTROL = 0x0054,
++ NFLASH_ECC_OOB = 0x005c,
++ NFLASH_ECC_CODE_GEN0 = 0x0060,
++ NFLASH_ECC_CODE_GEN1 = 0x0064,
++ NFLASH_ECC_CODE_GEN2 = 0x0068,
++ NFLASH_ECC_CODE_GEN3 = 0x006C,
++ NFLASH_FIFO_CONTROL = 0x0070,
++ NFLASH_FIFO_STATUS = 0x0074,
++ NFLASH_FIFO_ADDRESS = 0x0078,
++ NFLASH_FIFO_DATA = 0x007c,
++};
++
++
++
++//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
++//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
++
++//#define FLASH_PART_SIZE 8388608
++
++//static unsigned int flash_indirect_access = 0;
++
++
++#ifdef CONFIG_SL2312_SHARE_PIN
++void sl2312flash_enable_nand_flash(void)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val & 0xfffffffb;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++ return;
++}
++
++void sl2312flash_disable_nand_flash(void)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val | 0x00000004;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++ return;
++}
++#endif
++
++extern struct nand_oobinfo jffs2_oobinfo;
++/*
++ * Define partitions for flash devices
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++ { name: "RedBoot", offset: 0x00000000, size: 0x0020000, },
++ { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
++ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
++ { name: "Application", offset: 0x004A0000, size: 0x00320000, },
++ { name: "VCTL", offset: 0x007C0000, size: 0x20000, },
++ { name: "CurConf", offset: 0x007E0000, size: 0x20000, },
++ { name: "FIS directory", offset: 0x007e0000, size: 0x00020000, }
++
++};
++
++
++/*
++ * hardware specific access to control-lines
++*/
++static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd)
++{
++
++ return ;
++}
++
++static int sl2312_nand_scan_bbt(struct mtd_info *mtd)
++{
++ return 0;
++}
++
++/**
++ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
++ * @mtd: MTD device structure
++ * @ofs: offset relative to mtd start
++ */
++static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
++{
++ /* Check for invalid offset */
++ if (ofs > mtd->size)
++ return -EINVAL;
++
++ return sl2312_nand_block_checkbad (mtd, ofs, 1, 0);
++}
++
++/**
++ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
++ * @mtd: MTD device structure
++ * @ofs: offset from device start
++ * @getchip: 0, if the chip is already selected
++ * @allowbbt: 1, if its allowed to access the bbt area
++ *
++ * Check, if the block is bad. Either by reading the bad block table or
++ * calling of the scan function.
++ */
++
++static int sl2312_nand_erase_block(struct mtd_info *mtd, int page)
++{
++ int opcode;
++ /* Send commands to erase a page */
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++
++ if(mtd->oobblock > 528)
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
++ else
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
++
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
++ FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
++
++
++
++ /* read maker code */
++ opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ //cond_resched();
++ }
++}
++
++void sl2312_flash_delay(void)
++{
++ int i;
++
++ for(i=0; i<50; i++)
++ i=i;
++}
++
++static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
++{
++ struct nand_chip *this = mtd->priv;
++
++ if (!this->bbt)
++ return this->block_bad(mtd, ofs, getchip);
++
++ /* Return info from the table */
++ return nand_isbad_bbt (mtd, ofs, allowbbt);
++}
++
++/**
++ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
++ * @mtd: MTD device structure
++ * @ofs: offset relative to mtd start
++ */
++static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
++{
++ struct nand_chip *this = mtd->priv;
++ int ret;
++
++ if ((ret = sl2312_nand_block_isbad(mtd, ofs))) {
++ /* If it was bad already, return success and do nothing. */
++ if (ret > 0)
++ return 0;
++ return ret;
++ }
++
++ return this->block_markbad(mtd, ofs);
++}
++
++/*
++ * Get chip for selected access
++ */
++static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state)
++{
++
++ DECLARE_WAITQUEUE (wait, current);
++
++ /*
++ * Grab the lock and see if the device is available
++ * For erasing, we keep the spinlock until the
++ * erase command is written.
++ */
++retry:
++ spin_lock_bh (&this->chip_lock);
++
++ if (this->state == FL_READY) {
++ this->state = new_state;
++ if (new_state != FL_ERASING)
++ spin_unlock_bh (&this->chip_lock);
++ return;
++ }
++
++ if (this->state == FL_ERASING) {
++ if (new_state != FL_ERASING) {
++ this->state = new_state;
++ spin_unlock_bh (&this->chip_lock);
++ this->select_chip(mtd, 0); /* select in any case */
++ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++ return;
++ }
++ }
++
++ set_current_state (TASK_UNINTERRUPTIBLE);
++ add_wait_queue (&this->wq, &wait);
++ spin_unlock_bh (&this->chip_lock);
++ schedule ();
++ remove_wait_queue (&this->wq, &wait);
++ goto retry;
++}
++
++/*
++* read device ready pin
++*/
++static int sl2312_device_ready(struct mtd_info *mtd)
++{
++ int ready;
++
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data
++
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
++
++
++ ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, ready);
++
++ while(ready&0x80000000) //polling flash access 31b
++ {
++ ready=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ ready=FLASH_READ_REG(NFLASH_DATA)&0xff;
++ return ready;
++}
++void sl2312_enable_hwecc(struct mtd_info *mtd, int mode)
++{
++ /* reset first */
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++
++}
++
++
++void sl2312_device_setup(void)
++{
++
++}
++static u_char sl2312_nand_read_byte(struct mtd_info *mtd)
++{
++
++ unsigned int data=0, page=0, col=0, tmp, i;
++
++ printk ("**************************sl2312_nand_read_byte !! \n");
++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++ page = nand_page;
++ col = nand_col;
++ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
++ {
++ if(i==col)
++ data = FLASH_READ_DATA(page*mtd->oobblock +i);
++ else
++ tmp = FLASH_READ_DATA(page*mtd->oobblock +i);
++ }
++ return data&0xff;
++}
++
++static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte)
++{
++ //struct nand_chip *this = mtd->priv;
++ unsigned int page=0, col=0, i;
++ u_char *databuf,oobbuf[mtd->oobsize];
++ size_t retlen;
++ retlen=0;
++ printk ("********************sl2312_nand_write_byte !! \n");
++ page = nand_page;
++ col = nand_col;
++ databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL);
++
++ if (!databuf) {
++ printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++ }
++
++ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
++ databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
++
++ databuf[col] = byte;
++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
++
++}
++
++static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++ int i, page=0,col=0;
++ struct nand_chip *this = mtd->priv;
++ u_char *databuf, *oobbuf;
++ size_t retlen;
++ retlen=0;
++
++
++ printk ("***********************sl2312_nand_write_buf !! \n");
++ databuf = &(this->data_buf[0]);
++ oobbuf = &(this->data_buf[mtd->oobblock]);
++ for (i = 0; i < mtd->oobsize; i++)
++ oobbuf[i] = 0xff;
++
++ if(len < mtd->oobblock)
++ {
++ //addr = FLASH_READ_REG(NFLASH_ADDRESS);
++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++ page = nand_page;
++ col = nand_col;
++
++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL);
++
++ for(i=col;i<len;i++)
++ databuf[col+i] = buf[i];
++
++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
++
++ }
++
++}
++
++static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++ int i, page=0,col=0,addr=0,tmp=0;
++ //struct nand_chip *this = mtd->priv;
++ printk ("********************sl2312_nand_read_buf !! \n");
++ if(len < mtd->oobblock)
++ {
++ //addr = FLASH_READ_REG(NFLASH_ADDRESS);
++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++ page = nand_page;
++ col = nand_col;
++ for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++)
++ {
++ if(i<len)
++ buf[i] = FLASH_READ_DATA(addr+i);
++ else
++ tmp = FLASH_READ_DATA(addr+i);
++ }
++ }
++}
++
++static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++ int i;
++ //struct nand_chip *this = mtd->priv;
++ u_char *datatmp, *oobtmp;
++ size_t retlen;
++ retlen=0;
++
++ datatmp = kmalloc (mtd->oobblock,GFP_KERNEL);
++ oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL);
++
++ if ((!datatmp)||(!oobtmp)) {
++ printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++ }
++ //page = nand_page;
++ for(i=0;i<mtd->oobblock;i++)
++ datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i);
++ /* read oobdata */
++ for (i = 0; i < mtd->oobsize; i++)
++ oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i);
++
++ if(len==mtd->oobblock)
++ {
++ for (i=0; i<len; i++)
++ {
++ if (buf[i] != datatmp[i])
++ {
++ kfree(datatmp);
++ kfree(oobtmp);
++ printk("Data verify error -> page: %x, byte: %x \n",nand_page,i);
++ return i;
++ }
++ }
++ }
++ else if(len == mtd->oobsize)
++ {
++ for (i=0; i<len; i++)
++ {
++ if (buf[i] != oobtmp[i])
++ {
++ kfree(datatmp);
++ kfree(oobtmp);
++ printk("OOB verify error -> page: %x, byte: %x \n",nand_page,i);
++ return i;
++ }
++ }
++ }
++ else
++ {
++ printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len);
++ kfree(datatmp);
++ kfree(oobtmp);
++ return -1;
++ }
++
++ kfree(datatmp);
++ kfree(oobtmp);
++ return 0;
++}
++
++/*
++ * Send command to NAND device
++ */
++static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
++{
++ register struct nand_chip *this = mtd->priv;
++ int opcode;
++
++
++ /*
++ * program and erase have their own busy handlers
++ * status and sequential in needs no delay
++ */
++ switch (command) {
++
++ case NAND_CMD_PAGEPROG:
++ case NAND_CMD_ERASE1:
++ case NAND_CMD_ERASE2:
++ case NAND_CMD_SEQIN:
++ case NAND_CMD_STATUS:
++ case NAND_CMD_READ0:
++
++ /*
++ * Write out the command to the device.
++ */
++ if (column != -1 || page_addr != -1) {
++
++ /* Serially input address */
++ if (column != -1)
++ //FLASH_WRITE_REG(NFLASH_ADDRESS,column);
++ nand_col=column;
++
++ opcode = FLASH_READ_REG(NFLASH_ADDRESS);
++
++ if (page_addr != -1)
++ //FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8));
++ nand_page = page_addr;
++
++ }
++ return;
++
++ case NAND_CMD_RESET:
++ if (this->dev_ready)
++ break;
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command
++
++ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++ while ( !(sl2312_device_ready(mtd) & 0x40));
++ {
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ //sl2312_flash_delay();
++ schedule();
++ return;
++ }
++ /* This applies to read commands */
++ default:
++ /*
++ * If we don't have access to the busy pin, we apply the given
++ * command delay
++ */
++ if (!this->dev_ready) {
++ udelay (this->chip_delay);
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ return;
++ }
++ }
++
++ /* wait until command is processed */
++ while (!this->dev_ready(mtd));
++
++}
++/*Add function*/
++static void nand_read_id(int chip_no, unsigned char *id)
++{
++ unsigned int opcode, i;
++
++ if(chip_no==0)
++ CHIP_EN = NFLASH_CHIP0_EN;
++ else
++ CHIP_EN = NFLASH_CHIP1_EN;
++
++ opcode = FLASH_READ_REG(NFLASH_TYPE);
++
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ if((opcode&0x00000300)<=0x00000100)
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data
++ else
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data
++
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command
++ FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00
++
++ /* read maker code */
++ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++
++ opcode = FLASH_READ_REG(NFLASH_DATA);
++ if(DWIDTH==NFLASH_WiDTH16)
++ {
++ id[0] = opcode&0xff;
++ id[1] = (opcode&0xff00)>>8;
++ }
++ else
++ {
++ id[0] = opcode&0xff;
++ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++ opcode = FLASH_READ_REG(NFLASH_DATA);
++ id[1] = (opcode&0xff00)>>8;
++
++ opcode=FLASH_READ_REG(NFLASH_TYPE);
++ if((opcode&0x300)>0x100)
++ {
++ for(i=0;i<2;i++)
++ {
++ //data cycle 3 & 4 ->not use
++ opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++
++ opcode=FLASH_READ_REG(NFLASH_DATA);
++ id[2+i] = (opcode&(0xff0000<<i*8))>>(8*(2+i));
++ }
++ }
++ }
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++}
++
++/*
++ * NAND erase a block
++ */
++static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
++{
++ int page, len, status, pages_per_block, ret, chipnr;
++ struct nand_chip *this = mtd->priv;
++
++ DEBUG (MTD_DEBUG_LEVEL3,
++ "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
++
++ /* Start address must align on block boundary */
++ if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
++ return -EINVAL;
++ }
++
++ /* Length must align on block boundary */
++ if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
++ return -EINVAL;
++ }
++
++ /* Do not allow erase past end of device */
++ if ((instr->len + instr->addr) > mtd->size) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
++ return -EINVAL;
++ }
++
++ instr->fail_addr = 0xffffffff;
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL);
++
++ /* Shift to get first page */
++ page = (int) (instr->addr >> this->page_shift);
++ chipnr = (int) (instr->addr >> this->chip_shift);
++
++ /* Calculate pages in each block */
++ pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
++
++ /* Select the NAND device */
++ //this->select_chip(mtd, chipnr);
++ this->select_chip(mtd, 0);
++
++ /* Check the WP bit */
++ /* Check, if it is write protected */
++ status = sl2312_device_ready(mtd);
++ if (!(status & 0x80)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
++ instr->state = MTD_ERASE_FAILED;
++ goto erase_exit;
++ }
++
++ /* Loop through the pages */
++ len = instr->len;
++
++ instr->state = MTD_ERASING;
++
++ while (len) {
++ /* Check if we have a bad block, we do not erase bad blocks ! */
++ if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) {
++ printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
++ //instr->state = MTD_ERASE_FAILED;
++ //goto erase_exit;
++ }
++
++ /* Invalidate the page cache, if we erase the block which contains
++ the current cached page */
++ if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
++ this->pagebuf = -1;
++ /////////
++
++ ///* Send commands to erase a page */
++ //FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ //
++ //if(mtd->oobblock > 528)
++ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
++ //else
++ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
++ //
++ //FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
++ //FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
++ //
++ //
++ //
++ ///* read maker code */
++ //opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
++ //FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++ //
++ //while(opcode&0x80000000) //polling flash access 31b
++ //{
++ // opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ // //sl2312_flash_delay();
++ // schedule();
++ // //cond_resched();
++ //}
++ sl2312_nand_erase_block(mtd, page);
++ //////////////
++ status = this->waitfunc (mtd, this, FL_ERASING);
++ /* See if block erase succeeded */
++ if (status & 0x01) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
++ instr->state = MTD_ERASE_FAILED;
++ instr->fail_addr = (page << this->page_shift);
++ goto erase_exit;
++ }
++
++ /* Increment page address and decrement length */
++ len -= (1 << this->phys_erase_shift);
++ page += pages_per_block;
++
++ /* Check, if we cross a chip boundary */
++ if (len && !(page & this->pagemask)) {
++ chipnr++;
++ this->select_chip(mtd, 0);
++ this->select_chip(mtd, 0);
++ }
++ //sl2312_flash_delay();
++ schedule();
++ //cond_resched();
++ }
++ instr->state = MTD_ERASE_DONE;
++
++erase_exit:
++ /* De-select the NAND device */
++ this->select_chip(mtd, 0);
++ spin_unlock_bh (&this->chip_lock);
++
++ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;;
++ /* Do call back function */
++ if (!ret && instr->callback)
++ instr->callback (instr);
++
++ /* The device is ready */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ spin_unlock_bh (&this->chip_lock);
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ /* Return more or less happy */
++ return ret;
++}
++
++static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip)
++{
++ //struct nand_chip *this = mtd->priv;
++
++ switch(chip) {
++ case -1:
++ CHIP_EN = NFLASH_CHIP0_EN;
++ break;
++ case 0:
++ CHIP_EN = NFLASH_CHIP0_EN;
++ break;
++ case 1:
++ CHIP_EN = NFLASH_CHIP1_EN;
++ break;
++ default:
++ CHIP_EN = NFLASH_CHIP0_EN;
++ break;
++ }
++}
++
++/**
++ * nand_default_block_markbad - [DEFAULT] mark a block bad
++ * @mtd: MTD device structure
++ * @ofs: offset from device start
++ *
++ * This is the default implementation, which can be overridden by
++ * a hardware specific driver.
++*/
++static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
++{
++ struct nand_chip *this = mtd->priv;
++ u_char buf[2] = {0, 0};
++ size_t retlen;
++ int block;
++
++ /* Get block number */
++ block = ((int) ofs) >> this->bbt_erase_shift;
++ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
++
++ /* Do we have a flash based bad block table ? */
++ if (this->options & NAND_USE_FLASH_BBT)
++ return nand_update_bbt (mtd, ofs);
++
++ /* We write two bytes, so we dont have to mess with 16 bit access */
++ ofs += mtd->oobsize + (this->badblockpos & ~0x01);
++ return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf);
++}
++
++/* Appropriate chip should already be selected */
++static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, )
++{
++ u_char *buf, *oobbuf;
++ size_t retlen;
++ unsigned long page, chipnr;
++ struct nand_chip *this = mtd->priv;
++
++ if (getchip) {
++ page = (int)(ofs >> this->page_shift);
++ chipnr = (int)(ofs >> this->chip_shift);
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_READING, NULL);
++ /* Select the NAND device */
++ this->select_chip(mtd, chipnr);
++ } else
++ page = (int) ofs;
++
++ buf = kmalloc (mtd->oobblock,GFP_KERNEL);
++ oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL);
++
++ if ((!buf)||(!oobbuf)) {
++ printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++ }
++
++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL);
++
++
++ if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff)))
++ {
++ kfree(buf);
++ kfree(oobbuf);
++ return 1;
++ }
++
++ kfree(buf);
++ kfree(oobbuf);
++ return 0;
++}
++
++/*
++* Use NAND read ECC
++*/
++static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
++{
++ return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
++}
++
++/*
++ * NAND read with ECC
++ */
++static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
++ size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
++{
++ int j, col, page, opcode, i;
++ int end=0;//, ecc=0;//, end_page=0;
++ int erase_state = 0;
++ int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0
++ struct nand_chip *this = mtd->priv;
++ u_char *data_poi, *oob_data = oob_buf;
++ //u_char ecc_calc[6];
++ //u_char ecc_code[6];
++ int eccmode;
++ int *oob_config;
++
++
++
++ // use chip default if zero
++ if (oobsel == NULL)
++ oobsel = &mtd->oobinfo;
++
++ eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
++ oob_config = oobsel->eccpos;
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
++
++ /* Do not allow reads past end of device */
++ if ((from + len) > mtd->size) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
++ *retlen = 0;
++ return -EINVAL;
++ }
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state);
++
++ /* Select the NAND device */
++ this->select_chip(mtd, 0);
++
++ /* First we calculate the starting page */
++ page = from >> this->page_shift;
++
++ //end_page = mtd->oobblock + mtd->oobsize;
++ end = mtd->oobblock;
++ //ecc = mtd->eccsize;
++ /* Get raw starting column */
++ col = (from & (mtd->oobblock - 1));
++
++
++ /* Send the read command */
++ //this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
++
++ /* Loop until all data read */
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ while (read < len) {
++
++ //udelay(1200);
++ /* If we have consequent page reads, apply delay or wait for ready/busy pin */
++ if (read) {
++ if (!this->dev_ready)
++ udelay (this->chip_delay);
++ else
++ while (!this->dev_ready(mtd));
++ }
++
++ /*
++ * If the read is not page aligned, we have to read into data buffer
++ * due to ecc, else we read into return buffer direct
++ */
++ if (!col && (len - read) >= end)
++ data_poi = &buf[read];
++ else
++ data_poi = this->data_buf;
++
++ /* get oob area, if we have no oob buffer from fs-driver */
++ if (!oob_buf) {
++ oob_data = &this->data_buf[end];
++ oob = 0;
++ }
++
++ j = 0;
++ switch (eccmode) {
++ case NAND_ECC_NONE: { /* No ECC, Read in a page */
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ break;
++ }
++
++ case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
++ break;
++
++ case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */
++ break;
++
++ case NAND_ECC_HW3_512:
++ case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page */
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++ break;
++
++ default:
++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0);
++ //BUG();
++ }//end switch
++
++ for(i=0;i<end;i++)
++ {
++ //udelay(7);
++ data_poi[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
++ }
++ /* read oobdata */
++ for (i = 0; i < mtd->oobsize; i++)
++ {
++ //udelay(7);
++ oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i);
++ }
++
++ /* Skip ECC, if not active */
++ if (eccmode == NAND_ECC_NONE)
++ goto readdata;
++
++ // compare ecc and correct data
++
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ while(!(opcode&0x80000000)) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++ for(j=0;j<(end/512);j++)
++ {//for 2k page
++
++ opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j];
++
++ //opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4));
++
++ FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode);
++ opcode = 0x00000000|(j<<8); //select ECC code generation 0
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //???
++
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ if((opcode&0x00000003)==0x03)
++ {
++ printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n");
++ ecc_failed++;
++ }
++ else if((opcode&0x00000003)==0x01)
++ {
++ printk (KERN_WARNING "\nPageRead One bit data error !!");
++ // correct data
++ if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1)
++ data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3));
++ else
++ data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3));
++
++ }
++ else if((opcode&0x00000003)==0x02)
++ {
++ printk (KERN_WARNING "\nPageRead One bit ECC error !!\n");
++ }
++ else if((opcode&0x00000003)==0x00)
++ {
++
++ }
++
++ }//for 2k page
++readdata:
++ if (col || (len - read) < end) {
++ for (j = col; j < end && read < len; j++)
++ buf[read++] = data_poi[j];
++ } else
++ read += mtd->oobblock;
++ /* For subsequent reads align to page boundary. */
++ col = 0;
++ /* Increment page address */
++ page++;
++ schedule();
++ }
++ /* De-select the NAND device */
++ //this->select_chip(mtd, -1);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT);
++ /* Wake up anyone waiting on the device */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ spin_unlock_bh (&this->chip_lock);
++
++ /*
++ * Return success, if no ECC failures, else -EIO
++ * fs driver will take care of that, because
++ * retlen == desired len and result == -EIO
++ */
++ *retlen = read;
++ return ecc_failed ? -EIO : 0;
++}
++
++/*
++ * Wait for command done. This applies to erase and program only
++ * Erase can take up to 400ms and program up to 20ms according to
++ * general NAND and SmartMedia specs
++ *
++*/
++static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
++{
++ unsigned long timeo = jiffies;
++ int status, opcode;
++
++ if (state == FL_ERASING)
++ timeo += (HZ * 400) / 1000;
++ else
++ timeo += (HZ * 20) / 1000;
++
++ spin_lock_bh (&this->chip_lock);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data
++
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
++
++
++ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++
++ while (time_before(jiffies, timeo)) {
++ /* Check, if we were interrupted */
++ if (this->state != state) {
++ spin_unlock_bh (&this->chip_lock);
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ return 0;
++ }
++ if (this->dev_ready) {
++ if (this->dev_ready(mtd))
++ break;
++ }
++ if (FLASH_READ_REG(NFLASH_DATA) & 0x40)
++ break;
++
++ spin_unlock_bh (&this->chip_lock);
++ yield ();
++ spin_lock_bh (&this->chip_lock);
++ }
++ status = FLASH_READ_REG(NFLASH_DATA)&0xff;
++ spin_unlock_bh (&this->chip_lock);
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ return status;
++}
++
++static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
++{
++ int i, col, page, j=0;
++ //int erase_state = 0;
++ struct nand_chip *this = mtd->priv;
++ u_char *databuf, *oobbuf;
++
++ databuf = &this->data_buf[0];
++ oobbuf = &this->data_buf[mtd->oobblock];
++ for (i = 0; i < mtd->oobsize; i++)
++ oobbuf[i] = 0xff;
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
++
++ /* Shift to get page */
++ page = ((int) from) >> this->page_shift;
++
++ /* Mask to get column */
++ col = from & (mtd->oobsize-1); //0x0f;
++
++ /* Initialize return length value */
++ *retlen = 0;
++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
++ for(i=col,j=0;i<mtd->oobsize||i<(col+len);i++,j++)
++ buf[j] = oobbuf[i];
++
++ *retlen = j ;
++ return 0;
++}
++
++#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
++/*
++* Use NAND write ECC
++*/
++static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
++{
++ return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
++}
++
++/*
++ * NAND write with ECC
++ */
++static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
++ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
++{
++ int page, ret = 0, oob = 0, written = 0;
++ struct nand_chip *this = mtd->priv;
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
++
++
++ /* Do not allow write past end of device */
++ if ((to + len) > mtd->size) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
++ return -EINVAL;
++ }
++
++ /* reject writes, which are not page aligned */
++ if (NOTALIGNED (to) || NOTALIGNED(len)) {
++ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
++ return -EINVAL;
++ }
++
++ // if oobsel is NULL, use chip defaults
++ if (oobsel == NULL)
++ oobsel = &mtd->oobinfo;
++
++ /* Shift to get page */
++ page = ((int) to) >> this->page_shift;
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++ /* Select the NAND device */
++ this->select_chip(mtd, 0);
++
++ /* Check the WP bit */
++ if (!(sl2312_device_ready(mtd) & 0x80)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n");
++ ret = -EIO;
++ goto out;
++ }
++
++ /* Loop until all data is written */
++ while (written < len) {
++ //udelay(100);
++ int cnt = mtd->oobblock;
++ this->data_poi = (u_char*) &buf[written];
++ /* We use the same function for write and writev */
++ if (eccbuf) {
++ ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel);
++ oob += mtd->oobsize;
++ } else
++ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
++
++ if (ret)
++ goto out;
++
++ /* Update written bytes count */
++ written += cnt;
++ /* Increment page address */
++ page++;
++ }
++
++out:
++ /* De-select the NAND device */
++ //this->select_chip(mtd, -1);
++
++ /* Wake up anyone waiting on the device */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ spin_unlock_bh (&this->chip_lock);
++
++ *retlen = written;
++ return ret;
++}
++
++/*
++ * Nand_page_program function is used for write and writev !
++ * This function will always program a full page of data
++ * If you call it with a non page aligned buffer, you're lost :)
++ */
++static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel)
++{
++ int i, j, status, opcode;
++ u_char ecc_code[16], *oob_data;
++ int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
++ //int *oob_config = oobsel->eccpos;
++
++ /* pad oob area, if we have no oob buffer from fs-driver */
++ if (!oob_buf) {
++ oob_data = &this->data_buf[mtd->oobblock];
++ for (i = 0; i < mtd->oobsize; i++)
++ oob_data[i] = 0xff;
++ } else
++ oob_data = oob_buf;
++
++ /* Send command to begin auto page programming */
++
++ memset(oob_data,0xff,mtd->oobsize);
++ /* Write out complete page of data, take care of eccmode */
++ switch (eccmode) {
++ /* No ecc and software ecc 3/256, write all */
++ case NAND_ECC_NONE:
++ printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ break;
++ case NAND_ECC_SOFT:
++ break;
++
++ /* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */
++ case NAND_ECC_HW3_256:
++ break;
++
++ /* Hardware ecc 3 byte / 512 byte data, write full page */
++ case NAND_ECC_HW3_512:
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++
++ /* Hardware ecc 6 byte / 512 byte data, write full page */
++ case NAND_ECC_HW6_512:
++ break;
++
++ default:
++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ //BUG();
++ }
++
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++
++ for(i=0;i<mtd->oobblock;i++)
++ {
++ //udelay(5);
++ FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]);
++ }
++ ///////////////
++ if(eccmode!=NAND_ECC_NONE)
++ {
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ while(!(opcode&0x80000000)) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++
++
++ for(i=0;i<(mtd->oobblock/512);i++)
++ {
++ opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4));
++
++ for(j=3;j>0;j--)
++ oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24;
++
++ for(j=0;j<4;j++)
++ {
++ ecc_code[15-i*4] = opcode;
++ ecc_code[15-i*4-1] = opcode>>8;
++ ecc_code[15-i*4-2] = opcode>>16;
++ }
++ }
++
++ //disable ecc
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000);
++
++ /* Write out OOB data */
++ for(i=0;i<mtd->oobsize;i++)
++ {
++ //udelay(5);
++ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]);
++ }
++ }
++ else
++ {
++ for(i=0;i<mtd->oobsize;i++)
++ {
++ //udelay(5);
++ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff);
++ }
++ }
++
++
++ /* call wait ready function */
++ status = this->waitfunc (mtd, this, FL_WRITING);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ /* See if device thinks it succeeded */
++ if (status & 0x01) {
++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ return -EIO;
++ }
++
++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
++ /*
++ * The NAND device assumes that it is always writing to
++ * a cleanly erased page. Hence, it performs its internal
++ * write verification only on bits that transitioned from
++ * 1 to 0. The device does NOT verify the whole page on a
++ * byte by byte basis. It is possible that the page was
++ * not completely erased or the page is becoming unusable
++ * due to wear. The read with ECC would catch the error
++ * later when the ECC page check fails, but we would rather
++ * catch it early in the page write stage. Better to write
++ * no data than invalid data.
++ */
++
++ /* Send command to read back the page */
++ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
++ /* Loop through and verify the data */
++ if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
++ return -EIO;
++ }
++
++ /* check, if we have a fs-supplied oob-buffer */
++ if (oob_buf) {
++ if (this->verify_buf(mtd, oob_data, mtd->oobsize)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
++ return -EIO;
++ }
++ } else {
++ if (eccmode != NAND_ECC_NONE) {
++ int ecc_bytes = 0;
++
++ switch (this->eccmode) {
++ case NAND_ECC_SOFT:
++ case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break;
++ case NAND_ECC_HW3_512: ecc_bytes = 3; break;
++ case NAND_ECC_HW6_512: ecc_bytes = 6; break;
++ }
++
++
++
++ for(i=0;i < (mtd->oobblock+mtd->oobsize);i++)
++ {
++ if(i>=mtd->oobblock)
++ oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i);
++ else
++ oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i);
++ }
++
++ if(this->eccmode == NAND_ECC_HW3_512)
++ {
++ for(i=0;i<(mtd->oobblock/512);i++)
++ {
++ for(j=0;j<3;j++)
++ {
++ if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) {
++ DEBUG (MTD_DEBUG_LEVEL0,
++ "%s: Failed ECC write "
++ "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
++ return -EIO;
++ }
++ }
++ }
++ }
++ }//eccmode != NAND_ECC_NONE
++ }
++ /*
++ * Terminate the read command. This is faster than sending a reset command or
++ * applying a 20us delay before issuing the next programm sequence.
++ * This is not a problem for all chips, but I have found a bunch of them.
++ */
++ //this->select_chip(mtd, -1);
++ //this->select_chip(mtd, 0);
++#endif
++
++ return 0;
++}
++
++/*
++ * NAND write with iovec
++ */
++static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
++ loff_t to, size_t * retlen)
++{
++ return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0));
++}
++
++static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
++ loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
++{
++ int i, page, len, total_len, ret = 0, written = 0;
++ struct nand_chip *this = mtd->priv;
++
++ /* Calculate total length of data */
++ total_len = 0;
++ for (i = 0; i < count; i++)
++ total_len += (int) vecs[i].iov_len;
++
++ DEBUG (MTD_DEBUG_LEVEL3,
++ "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
++
++ /* Do not allow write past end of page */
++ if ((to + total_len) > mtd->size) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
++ return -EINVAL;
++ }
++
++ /* reject writes, which are not page aligned */
++ if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
++ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
++ return -EINVAL;
++ }
++
++ // if oobsel is NULL, use chip defaults
++ if (oobsel == NULL)
++ oobsel = &mtd->oobinfo;
++
++ /* Shift to get page */
++ page = ((int) to) >> this->page_shift;
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++ /* Select the NAND device */
++ this->select_chip(mtd, 0);
++
++ /* Check the WP bit */
++ if (!(sl2312_device_ready(mtd) & 0x80)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n");
++ ret = -EIO;
++ goto out;
++ }
++
++ /* Loop until all iovecs' data has been written */
++ len = 0;
++ while (count) {
++ /*
++ * Check, if the tuple gives us not enough data for a
++ * full page write. Then we can use the iov direct,
++ * else we have to copy into data_buf.
++ */
++ if ((vecs->iov_len - len) >= mtd->oobblock) {
++ this->data_poi = (u_char *) vecs->iov_base;
++ this->data_poi += len;
++ len += mtd->oobblock;
++ /* Check, if we have to switch to the next tuple */
++ if (len >= (int) vecs->iov_len) {
++ vecs++;
++ len = 0;
++ count--;
++ }
++ } else {
++ /*
++ * Read data out of each tuple until we have a full page
++ * to write or we've read all the tuples.
++ */
++ int cnt = 0;
++ while ((cnt < mtd->oobblock) && count) {
++ if (vecs->iov_base != NULL && vecs->iov_len) {
++ this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
++ }
++ /* Check, if we have to switch to the next tuple */
++ if (len >= (int) vecs->iov_len) {
++ vecs++;
++ len = 0;
++ count--;
++ }
++ }
++ this->data_poi = this->data_buf;
++ }
++
++ /* We use the same function for write and writev !) */
++ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
++ if (ret)
++ goto out;
++
++ /* Update written bytes count */
++ written += mtd->oobblock;;
++
++ /* Increment page address */
++ page++;
++ }
++
++out:
++ /* De-select the NAND device */
++ //this->select_chip(mtd, -1);
++
++ /* Wake up anyone waiting on the device */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ spin_unlock_bh (&this->chip_lock);
++
++ *retlen = written;
++ return ret;
++}
++
++/*
++static u_char ffchars[] = {
++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
++};
++*/
++/*
++ * NAND write out-of-band
++ */
++static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
++{
++ int column, page, status, ret = 0, j=0;
++ struct nand_chip *this = mtd->priv;
++ u_char *databuf, *oobbuf;
++
++
++ databuf = &this->data_buf[0];
++ oobbuf = &this->data_buf[mtd->oobblock];
++ for (j = 0; j < mtd->oobsize; j++)
++ oobbuf[j] = 0xff;
++//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
++// int i;
++//#endif
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
++
++ /* Shift to get page */
++ page = ((int) to) >> this->page_shift;
++
++ /* Mask to get column */
++ column = to & 0x1f;
++
++ /* Initialize return length value */
++ *retlen = 0;
++
++ /* Do not allow write past end of page */
++ if ((column + len) > mtd->oobsize) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
++ return -EINVAL;
++ }
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++ /* Select the NAND device */
++ this->select_chip(mtd, 0);
++
++ /* Reset the chip. Some chips (like the Toshiba TC5832DC found
++ in one of my DiskOnChip 2000 test units) will clear the whole
++ data page too if we don't do this. I have no clue why, but
++ I seem to have 'fixed' it in the doc2000 driver in
++ August 1999. dwmw2. */
++ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++
++ /* Check the WP bit */
++ if (!(sl2312_device_ready(mtd) & 0x80)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n");
++ ret = -EIO;
++ goto out;
++ }
++ /* Write out desired data */
++ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page);
++
++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
++
++ for(j=column;j<(column+len);j++)
++ oobbuf[j] = buf[j-column];
++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL);
++
++ status = this->waitfunc (mtd, this, FL_WRITING);
++
++ /* See if device thinks it succeeded */
++ if (status & 0x01) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
++ ret = -EIO;
++ goto out;
++ }
++ /* Return happy */
++ *retlen = len;
++
++
++out:
++ /* De-select the NAND device */
++ //this->select_chip(mtd, -1);
++
++ /* Wake up anyone waiting on the device */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ spin_unlock_bh (&this->chip_lock);
++
++ return ret;
++}
++
++/*
++ * NAND sync
++ */
++static void sl2312_nand_sync (struct mtd_info *mtd)
++{
++ struct nand_chip *this = mtd->priv;
++ DECLARE_WAITQUEUE (wait, current);
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
++
++retry:
++ /* Grab the spinlock */
++ spin_lock_bh (&this->chip_lock);
++
++ /* See what's going on */
++ switch (this->state) {
++ case FL_READY:
++ case FL_SYNCING:
++ this->state = FL_SYNCING;
++ spin_unlock_bh (&this->chip_lock);
++ break;
++
++ default:
++ /* Not an idle state */
++ add_wait_queue (&this->wq, &wait);
++ spin_unlock_bh (&this->chip_lock);
++ schedule ();
++
++ remove_wait_queue (&this->wq, &wait);
++ goto retry;
++ }
++
++ /* Lock the device */
++ spin_lock_bh (&this->chip_lock);
++
++ /* Set the device to be ready again */
++ if (this->state == FL_SYNCING) {
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ }
++
++ /* Unlock the device */
++ spin_unlock_bh (&this->chip_lock);
++}
++
++
++/*
++ * Scan for the NAND device
++ */
++int sl2312_nand_scan (struct mtd_info *mtd, int maxchips)
++{
++ int i, j, nand_maf_id, nand_dev_id, busw;
++ struct nand_chip *this = mtd->priv;
++ unsigned char id[4];
++
++ /* Get buswidth to select the correct functions*/
++ busw = this->options & NAND_BUSWIDTH_16;
++
++ /* check for proper chip_delay setup, set 20us if not */
++ if (!this->chip_delay)
++ this->chip_delay = 20;
++
++ /* check, if a user supplied command function given */
++ if (this->cmdfunc == NULL)
++ this->cmdfunc = sl2312_nand_command;
++
++ /* check, if a user supplied wait function given */
++ if (this->waitfunc == NULL)
++ this->waitfunc = sl2312_nand_waitfunc;
++
++ if (!this->select_chip)
++ this->select_chip = sl2312_nand_select_chip;
++ if (!this->write_byte)
++ this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte;
++ if (!this->read_byte)
++ this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte;
++// if (!this->write_word)
++// this->write_word = nand_write_word;
++// if (!this->read_word)
++// this->read_word = nand_read_word;
++// if (!this->block_bad)
++ this->block_bad = sl2312_nand_block_bad; //nand_block_bad;
++ if (!this->block_markbad)
++ this->block_markbad = sl2312_nand_default_block_markbad;
++ if (!this->write_buf)
++ this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf;
++ if (!this->read_buf)
++ this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf;
++ if (!this->verify_buf)
++ this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf;
++ if (!this->scan_bbt)
++ this->scan_bbt = sl2312_nand_scan_bbt;
++
++ /* Select the device */
++ this->select_chip(mtd, 0);
++
++ /* Read manufacturer and device IDs */
++ nand_read_id(0,id);
++
++ nand_maf_id = id[0];
++ nand_dev_id = id[1];
++
++ /* Print and store flash device information */
++ for (i = 0; nand_flash_ids[i].name != NULL; i++) {
++
++ if (nand_dev_id != nand_flash_ids[i].id)
++ continue;
++
++ if (!mtd->name) mtd->name = nand_flash_ids[i].name;
++ this->chipsize = nand_flash_ids[i].chipsize << 20;
++
++ /* New devices have all the information in additional id bytes */
++ if (!nand_flash_ids[i].pagesize) {
++ int extid;
++
++ /* The 4th id byte is the important one */
++ extid = id[3];
++ /* Calc pagesize */
++ mtd->oobblock = 1024 << (extid & 0x3);
++ extid >>= 2;
++ /* Calc oobsize */
++ mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
++ extid >>= 2;
++ /* Calc blocksize. Blocksize is multiples of 64KiB */
++ mtd->erasesize = (64 * 1024) << (extid & 0x03);
++ extid >>= 2;
++ /* Get buswidth information */
++ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
++
++ } else {
++ /* Old devices have this data hardcoded in the
++ * device id table */
++ mtd->erasesize = nand_flash_ids[i].erasesize;
++ mtd->oobblock = nand_flash_ids[i].pagesize;
++ mtd->oobsize = mtd->oobblock / 32;
++ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
++ }
++
++ /* Check, if buswidth is correct. Hardware drivers should set
++ * this correct ! */
++ if (busw != (this->options & NAND_BUSWIDTH_16)) {
++ printk (KERN_INFO "NAND device: Manufacturer ID:"
++ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
++ nand_manuf_ids[i].name , mtd->name);
++ printk (KERN_WARNING
++ "NAND bus width %d instead %d bit\n",
++ (this->options & NAND_BUSWIDTH_16) ? 16 : 8,
++ busw ? 16 : 8);
++ this->select_chip(mtd, -1);
++ return 1;
++ }
++
++ /* Calculate the address shift from the page size */
++ this->page_shift = ffs(mtd->oobblock) - 1;
++ this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
++ this->chip_shift = ffs(this->chipsize) - 1;
++
++ /* Set the bad block position */
++ this->badblockpos = mtd->oobblock > 512 ?
++ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
++
++ /* Get chip options, preserve non chip based options */
++ this->options &= ~NAND_CHIPOPTIONS_MSK;
++ this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
++ /* Set this as a default. Board drivers can override it, if neccecary */
++ this->options |= NAND_NO_AUTOINCR;
++ /* Check if this is a not a samsung device. Do not clear the options
++ * for chips which are not having an extended id.
++ */
++ if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
++ this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
++
++ /* Check for AND chips with 4 page planes */
++ // if (this->options & NAND_4PAGE_ARRAY)
++ // this->erase_cmd = multi_erase_cmd;
++ // else
++ // this->erase_cmd = single_erase_cmd;
++
++ /* Do not replace user supplied command function ! */
++ // if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
++ // this->cmdfunc = nand_command_lp;
++
++ /* Try to identify manufacturer */
++ for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
++ if (nand_manuf_ids[j].id == nand_maf_id)
++ break;
++ }
++ printk (KERN_INFO "NAND device: Manufacturer ID:"
++ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
++ nand_manuf_ids[j].name , nand_flash_ids[i].name);
++ break;
++ }
++ /////////////////////////////
++
++ for (i=1; i < maxchips; i++) {
++ this->select_chip(mtd, i);
++
++ /* Send the command for reading device ID */
++ nand_read_id(1,id);
++
++ /* Read manufacturer and device IDs */
++ if (nand_maf_id != id[0] ||
++ nand_dev_id != id[1])
++ break;
++ }
++ if (i > 1)
++ printk(KERN_INFO "%d NAND chips detected\n", i);
++
++ /* Allocate buffers, if neccecary */
++ if (!this->oob_buf) {
++ size_t len;
++ len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
++ this->oob_buf = kmalloc (len, GFP_KERNEL);
++ if (!this->oob_buf) {
++ printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
++ return -ENOMEM;
++ }
++ this->options |= NAND_OOBBUF_ALLOC;
++ }
++
++ if (!this->data_buf) {
++ size_t len;
++ len = mtd->oobblock + mtd->oobsize;
++ this->data_buf = kmalloc (len, GFP_KERNEL);
++ if (!this->data_buf) {
++ if (this->options & NAND_OOBBUF_ALLOC)
++ kfree (this->oob_buf);
++ printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
++ return -ENOMEM;
++ }
++ this->options |= NAND_DATABUF_ALLOC;
++ }
++
++ /* Store the number of chips and calc total size for mtd */
++ this->numchips = i;
++ mtd->size = i * this->chipsize;
++ /* Convert chipsize to number of pages per chip -1. */
++ this->pagemask = (this->chipsize >> this->page_shift) - 1;
++ /* Preset the internal oob buffer */
++ memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
++
++ /* If no default placement scheme is given, select an
++ * appropriate one */
++ if (!this->autooob) {
++ /* Select the appropriate default oob placement scheme for
++ * placement agnostic filesystems */
++ switch (mtd->oobsize) {
++ case 8:
++ this->autooob = &nand_oob_8;
++ break;
++ case 16:
++ this->autooob = &nand_oob_16;
++ break;
++ case 64:
++ this->autooob = &nand_oob_64;
++ break;
++ default:
++ printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
++ mtd->oobsize);
++ BUG();
++ }
++ }
++
++ /* The number of bytes available for the filesystem to place fs dependend
++ * oob data */
++ if (this->options & NAND_BUSWIDTH_16) {
++ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
++ if (this->autooob->eccbytes & 0x01)
++ mtd->oobavail--;
++ } else
++ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
++
++
++ /*
++ * check ECC mode, default to software
++ * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
++ * fallback to software ECC
++ */
++ this->eccsize = 256; /* set default eccsize */
++ this->eccbytes = 3;
++
++ switch (this->eccmode) {
++ case NAND_ECC_HW12_2048:
++ if (mtd->oobblock < 2048) {
++ printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
++ mtd->oobblock);
++ this->eccmode = NAND_ECC_SOFT;
++ this->calculate_ecc = nand_calculate_ecc;
++ this->correct_data = nand_correct_data;
++ } else
++ this->eccsize = 2048;
++ break;
++
++ case NAND_ECC_HW3_512:
++ case NAND_ECC_HW6_512:
++ case NAND_ECC_HW8_512:
++ if (mtd->oobblock == 256) {
++ printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
++ this->eccmode = NAND_ECC_SOFT;
++ this->calculate_ecc = nand_calculate_ecc;
++ this->correct_data = nand_correct_data;
++ } else
++ this->eccsize = 512; /* set eccsize to 512 */
++ break;
++
++ case NAND_ECC_HW3_256:
++ break;
++
++ case NAND_ECC_NONE:
++ printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
++ this->eccmode = NAND_ECC_NONE;
++ break;
++
++ case NAND_ECC_SOFT:
++ this->calculate_ecc = nand_calculate_ecc;
++ this->correct_data = nand_correct_data;
++ break;
++
++ default:
++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++ BUG();
++ }
++
++ /* Check hardware ecc function availability and adjust number of ecc bytes per
++ * calculation step
++ */
++ switch (this->eccmode) {
++ case NAND_ECC_HW12_2048:
++ this->eccbytes += 4;
++ case NAND_ECC_HW8_512:
++ this->eccbytes += 2;
++ case NAND_ECC_HW6_512:
++ this->eccbytes += 3;
++// case NAND_ECC_HW3_512:
++ case NAND_ECC_HW3_256:
++ if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
++ break;
++ printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
++ BUG();
++ }
++
++ mtd->eccsize = this->eccsize;
++
++ /* Set the number of read / write steps for one page to ensure ECC generation */
++ switch (this->eccmode) {
++ case NAND_ECC_HW12_2048:
++ this->eccsteps = mtd->oobblock / 2048;
++ break;
++ case NAND_ECC_HW3_512:
++ case NAND_ECC_HW6_512:
++ case NAND_ECC_HW8_512:
++ this->eccsteps = mtd->oobblock / 512;
++ break;
++ case NAND_ECC_HW3_256:
++ case NAND_ECC_SOFT:
++ this->eccsteps = mtd->oobblock / 256;
++ break;
++
++ case NAND_ECC_NONE:
++ this->eccsteps = 1;
++ break;
++ }
++
++ /* Initialize state, waitqueue and spinlock */
++ this->state = FL_READY;
++ init_waitqueue_head (&this->wq);
++ spin_lock_init (&this->chip_lock);
++
++ /* De-select the device */
++ this->select_chip(mtd, 0);
++
++ /* Print warning message for no device */
++ if (!mtd->size) {
++ printk (KERN_WARNING "No NAND device found!!!\n");
++ return 1;
++ }
++
++ /* Fill in remaining MTD driver data */
++ mtd->type = MTD_NANDFLASH;
++ mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
++ mtd->ecctype = MTD_ECC_SW;
++ mtd->erase = sl2312_nand_erase;
++ mtd->point = NULL;
++ mtd->unpoint = NULL;
++ mtd->read = sl2312_nand_read;
++ mtd->write = sl2312_nand_write;
++ mtd->read_ecc = sl2312_nand_read_ecc;
++ mtd->write_ecc = sl2312_nand_write_ecc;
++ mtd->read_oob = sl2312_nand_read_oob;
++ mtd->write_oob = sl2312_nand_write_oob;
++ mtd->readv = NULL;
++ mtd->writev = sl2312_nand_writev;
++ mtd->writev_ecc = sl2312_nand_writev_ecc;
++ mtd->sync = sl2312_nand_sync;
++ mtd->lock = NULL;
++ mtd->unlock = NULL;
++ mtd->suspend = NULL;
++ mtd->resume = NULL;
++ mtd->block_isbad = sl2312_nand_block_isbad;
++ mtd->block_markbad = sl2312_nand_block_markbad;
++
++ /* and make the autooob the default one */
++ memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
++
++ mtd->owner = THIS_MODULE;
++
++ /* Build bad block table */
++ return this->scan_bbt (mtd);
++}
++
++/*End Add function*/
++
++/*
++ * Main initialization routine
++ */
++extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
++
++int __init sl2312_mtd_init (void)
++{
++ struct nand_chip *this;
++ int err = 0;
++ struct mtd_partition *parts;
++ int nr_parts = 0;
++ int ret, data, *base;
++
++ printk("NAND MTD Driver Start Init ......\n");
++
++ base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30);
++ data = *base;
++ data&=0xffffffeb;
++ data|=0x3; //disable p & s flash
++ *base = data;
++
++ /* Allocate memory for MTD device structure and private data */
++ sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
++ if (!sl2312_mtd) {
++ printk ("Unable to allocate SL2312 NAND MTD device structure.\n");
++ err = -ENOMEM;
++ goto out;
++ }
++
++ // sl2312_device_setup();
++
++ /* io is indirect via a register so don't need to ioremap address */
++
++ /* Get pointer to private data */
++ this = (struct nand_chip *) (&sl2312_mtd[1]);
++
++ /* Initialize structures */
++ memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info));
++ memset((char *) this, 0, sizeof(struct nand_chip));
++
++ /* Link the private data with the MTD structure */
++ sl2312_mtd->priv = this;
++ sl2312_mtd->name = "sl2312-nand";
++
++ /* Set address of NAND IO lines */
++ this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
++ this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
++ this->read_byte = sl2312_nand_read_byte;
++ this->write_byte = sl2312_nand_write_byte;
++ this->write_buf = sl2312_nand_write_buf;
++ this->read_buf = sl2312_nand_read_buf;
++ this->verify_buf = sl2312_nand_verify_buf;
++ this->select_chip = sl2312_nand_select_chip;
++ this->block_bad = sl2312_nand_block_bad;
++ this->hwcontrol = sl2312_hwcontrol;
++ this->dev_ready = sl2312_device_ready;
++ this->cmdfunc = sl2312_nand_command;
++ this->waitfunc = sl2312_nand_waitfunc;
++ //this->calculate_ecc = sl2312_readecc;
++ this->enable_hwecc = sl2312_enable_hwecc;
++ this->eccmode = NAND_ECC_HW3_512;
++ /*this->eccsize = 512; */
++ /* 20 us command delay time */
++ this->chip_delay = 20;
++
++ this->correct_data = nand_correct_data;
++// this->scan_bbt = sl2312_nand_scan_bbt;
++
++ /* Allocate memory for internal data buffer */
++ this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL);
++ if (!this->data_buf) {
++ printk ("Unable to allocate NAND data buffer.\n");
++ err = -ENOMEM;
++ goto out_ior;
++ }
++
++ /* Scan to find existance of the device */
++ if (sl2312_nand_scan(sl2312_mtd, 1)) {
++ err = -ENXIO;
++ goto out_ior;
++ }
++
++ /* Register the partitions */
++ parts = sl2312_partitions;
++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++
++ ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts);
++ /*If we got an error, free all resources.*/
++ if (ret < 0) {
++ del_mtd_partitions(sl2312_mtd);
++ map_destroy(sl2312_mtd);
++ }
++ goto out;
++
++//out_buf:
++// kfree (this->data_buf);
++out_ior:
++out:
++ printk("NAND MTD Driver Init Success ......\n");
++ return err;
++}
++
++module_init(sl2312_mtd_init);
++
++/*
++ * Clean up routine
++ */
++#ifdef MODULE
++static void __exit sl2312_cleanup (void)
++{
++ struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1];
++
++ /* Unregister partitions */
++ del_mtd_partitions(sl2312_mtd);
++
++ /* Unregister the device */
++ del_mtd_device (sl2312_mtd);
++
++ /* Free internal data buffers */
++ kfree (this->data_buf);
++
++ /* Free the MTD device structure */
++ kfree (sl2312_mtd);
++}
++module_exit(sl2312_cleanup);
++#endif
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
++MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312");
+--- /dev/null
++++ b/drivers/mtd/nand/sl2312-flash-nand.h
+@@ -0,0 +1,24 @@
++#ifndef SL2312_FLASH_NAND_H
++#define SL2312_FLASH_NAND_H
++
++#include <linux/wait.h>
++#include <linux/spinlock.h>
++
++/*Add function*/
++static void nand_read_id(int chip_no,unsigned char *id);
++
++
++
++#define NFLASH_WiDTH8 0x00000000
++#define NFLASH_WiDTH16 0x00000400
++#define NFLASH_WiDTH32 0x00000800
++#define NFLASH_CHIP0_EN 0x00000000 // 16th bit = 0
++#define NFLASH_CHIP1_EN 0x00010000 // 16th bit = 1
++#define NFLASH_DIRECT 0x00004000
++#define NFLASH_INDIRECT 0x00000000
++
++
++#define DWIDTH NFLASH_WiDTH8
++
++
++#endif /* SL2312_FLASH_NAND_H */
+--- /dev/null
++++ b/include/linux/mtd/kvctl.h
+@@ -0,0 +1,40 @@
++#ifndef KVCTL_H
++#define KVCTL_H
++
++#define VCTL_HEAD_SIZE 8
++#define VCTL_ENTRY_LEN 20
++
++typedef struct
++{
++ char header[4];
++ unsigned int entry_num;
++} vctl_mheader;
++
++typedef struct
++{
++ char header[4];
++ unsigned int size;
++ unsigned int type;
++ char majorver[4];
++ char minorver[4];
++ unsigned char *payload;
++} vctl_entry;
++
++typedef struct
++{
++ unsigned char mac[6];
++ unsigned char vlanid;
++ unsigned char vlanmap;
++} vlaninfo;
++
++#define VCT_VENDORSPEC 0
++#define VCT_BOOTLOADER 1
++#define VCT_KERNEL 2
++#define VCT_VERCTL 3
++#define VCT_CURRCONF 4
++#define VCT_DEFAULTCONF 5
++#define VCT_ROOTFS 6
++#define VCT_APP 7
++#define VCT_VLAN 8
++
++#endif
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -71,3 +71,7 @@
+ obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
+ obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
+ obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
++###### for Storlink Soc #######
++obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o
++obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o
++obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o