summaryrefslogtreecommitdiff
path: root/target/linux/sunxi/patches-4.4
diff options
context:
space:
mode:
authorZoltan Herpai <wigyori@uid0.hu>2016-01-09 16:20:39 +0000
committerZoltan Herpai <wigyori@uid0.hu>2016-01-09 16:20:39 +0000
commita6611a92d5f4d3bab43feb1abf36924caf3ecc87 (patch)
treebb29022fd41ba5d5bae6022bfab6f48d2c2da574 /target/linux/sunxi/patches-4.4
parent24894e52bc688844dfc96fc80073f2ac3196f992 (diff)
downloadmtk-20170518-a6611a92d5f4d3bab43feb1abf36924caf3ecc87.zip
mtk-20170518-a6611a92d5f4d3bab43feb1abf36924caf3ecc87.tar.gz
mtk-20170518-a6611a92d5f4d3bab43feb1abf36924caf3ecc87.tar.bz2
sunxi: initial 4.4 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48161
Diffstat (limited to 'target/linux/sunxi/patches-4.4')
-rw-r--r--target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch43
-rw-r--r--target/linux/sunxi/patches-4.4/101-dt-sun4i-add-dram-gates.patch90
-rw-r--r--target/linux/sunxi/patches-4.4/102-dt-sun7i-add-dram-gates.patch79
-rw-r--r--target/linux/sunxi/patches-4.4/103-clk-sunxi-add-h3-clksupport.patch189
-rw-r--r--target/linux/sunxi/patches-4.4/104-1-dt-sunxi-add-h3-dtsi.patch518
-rw-r--r--target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch116
-rw-r--r--target/linux/sunxi/patches-4.4/105-phy-use_of_match_node.patch220
-rw-r--r--target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch126
-rw-r--r--target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch51
-rw-r--r--target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch233
-rw-r--r--target/linux/sunxi/patches-4.4/111-1-dt-sun4i-add-ve-clock-module.patch34
-rw-r--r--target/linux/sunxi/patches-4.4/111-2-dt-sun7i-add-ve-clock-module.patch34
-rw-r--r--target/linux/sunxi/patches-4.4/115-musb-ignore-vbus-errors.patch28
-rw-r--r--target/linux/sunxi/patches-4.4/116-crypto-add-missing-statesize.patch39
-rw-r--r--target/linux/sunxi/patches-4.4/130-pinctrl-sunxi-add-h3-pio.patch577
-rw-r--r--target/linux/sunxi/patches-4.4/131-reset-add-h3-resets.patch95
-rw-r--r--target/linux/sunxi/patches-4.4/132-dt-sun8i-add-h3-usbclocks.patch36
-rw-r--r--target/linux/sunxi/patches-4.4/133-dt-sun8i-add-usbphy-usbhost-ctrl-nodes.patch125
-rw-r--r--target/linux/sunxi/patches-4.4/134-dt-sun8i-orangepiplus-enable-usbhost.patch79
-rw-r--r--target/linux/sunxi/patches-4.4/135-clk-sunxi-fix-signedness-bug.patch27
-rw-r--r--target/linux/sunxi/patches-4.4/140-reset-add-of_reset_control_get_by_index.patch113
-rw-r--r--target/linux/sunxi/patches-4.4/141-reset-fix-of_reset_control_get.patch41
-rw-r--r--target/linux/sunxi/patches-4.4/142-reset-use-ENOTSUPP-instead-of-ENOSYS.patch91
-rw-r--r--target/linux/sunxi/patches-4.4/143-reset-add-shared-resetcontrol-asserts.patch271
-rw-r--r--target/linux/sunxi/patches-4.4/144-usb-ehci-plat-support-multiple-reset-ctrllines.patch131
-rw-r--r--target/linux/sunxi/patches-4.4/145-usb-ohci-plat-support-multiple-reset-ctrllines.patch132
-rw-r--r--target/linux/sunxi/patches-4.4/150-dt-sun7i-enable-codec-on-pcduino3.patch29
-rw-r--r--target/linux/sunxi/patches-4.4/200-dt-sun7i-add-lamobo-r1.patch335
28 files changed, 3882 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch b/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch
new file mode 100644
index 0000000..f9caaa0
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch
@@ -0,0 +1,43 @@
+From 6d3a47c29186aa8d26ff05a6209c94291ace0696 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Sat, 5 Dec 2015 21:16:42 +0800
+Subject: [PATCH] clk: sunxi: Add DRAM gates support for sun4i-a10
+
+The A10/A20 share the same set of DRAM clock gates, which controls
+direct memory access for some peripherals.
+
+On the A10, bit 15 controls the system's DRAM clock output (possibly
+to the DRAM chips), which we need to keep on.
+
+On the A20 this has been moved to the DRAM controller, becoming a no-op.
+However it is still listed in the user manual, so add it anyway.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
+ drivers/clk/sunxi/clk-simple-gates.c | 12 ++++++++++++
+ 2 files changed, 13 insertions(+)
+
+diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
+index 153ac72..ef0b452 100644
+diff --git a/drivers/clk/sunxi/clk-simple-gates.c b/drivers/clk/sunxi/clk-simple-gates.c
+index c8acc06..f4da52b 100644
+--- a/drivers/clk/sunxi/clk-simple-gates.c
++++ b/drivers/clk/sunxi/clk-simple-gates.c
+@@ -160,3 +160,15 @@ CLK_OF_DECLARE(sun5i_a13_ahb, "allwinner,sun5i-a13-ahb-gates-clk",
+ sun4i_a10_ahb_init);
+ CLK_OF_DECLARE(sun7i_a20_ahb, "allwinner,sun7i-a20-ahb-gates-clk",
+ sun4i_a10_ahb_init);
++
++static const int sun4i_a10_dram_critical_clocks[] __initconst = {
++ 15, /* dram_output */
++};
++
++static void __init sun4i_a10_dram_init(struct device_node *node)
++{
++ sunxi_simple_gates_setup(node, sun4i_a10_dram_critical_clocks,
++ ARRAY_SIZE(sun4i_a10_dram_critical_clocks));
++}
++CLK_OF_DECLARE(sun4i_a10_dram, "allwinner,sun4i-a10-dram-gates-clk",
++ sun4i_a10_dram_init);
diff --git a/target/linux/sunxi/patches-4.4/101-dt-sun4i-add-dram-gates.patch b/target/linux/sunxi/patches-4.4/101-dt-sun4i-add-dram-gates.patch
new file mode 100644
index 0000000..9bdf400
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/101-dt-sun4i-add-dram-gates.patch
@@ -0,0 +1,90 @@
+From 82f8582feef4c048ee7ef0155a71c23614a7856d Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Sat, 5 Dec 2015 21:16:44 +0800
+Subject: [PATCH] ARM: dts: sun4i: Add DRAM gates
+
+The DRAM gates controls direct memory access for some peripherals.
+These peripherals include the display pipeline, so add the required
+gates to the simplefb nodes as well.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/sun4i-a10.dtsi | 36 ++++++++++++++++++++++++++++++++----
+ 1 file changed, 32 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
+index aa90f31..849d024 100644
+--- a/arch/arm/boot/dts/sun4i-a10.dtsi
++++ b/arch/arm/boot/dts/sun4i-a10.dtsi
+@@ -66,7 +66,7 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+- <&ahb_gates 44>;
++ <&ahb_gates 44>, <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -75,7 +75,8 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+- <&ahb_gates 44>, <&ahb_gates 46>;
++ <&ahb_gates 44>, <&ahb_gates 46>,
++ <&dram_gates 25>, <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -84,7 +85,8 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+- <&ahb_gates 46>;
++ <&ahb_gates 46>, <&dram_gates 25>,
++ <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -93,7 +95,8 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+- <&ahb_gates 44>, <&ahb_gates 46>;
++ <&ahb_gates 44>, <&ahb_gates 46>,
++ <&dram_gates 25>, <&dram_gates 26>;
+ status = "disabled";
+ };
+ };
+@@ -492,6 +495,31 @@
+ clock-output-names = "spi3";
+ };
+
++ dram_gates: clk@01c20100 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-dram-gates-clk";
++ reg = <0x01c20100 0x4>;
++ clocks = <&pll5 0>;
++ clock-indices = <0>,
++ <1>, <2>,
++ <3>,
++ <4>,
++ <5>, <6>,
++ <15>,
++ <24>, <25>,
++ <26>, <27>,
++ <28>, <29>;
++ clock-output-names = "dram_ve",
++ "dram_csi0", "dram_csi1",
++ "dram_ts",
++ "dram_tvd",
++ "dram_tve0", "dram_tve1",
++ "dram_output",
++ "dram_de_fe1", "dram_de_fe0",
++ "dram_de_be0", "dram_de_be1",
++ "dram_de_mp", "dram_ace";
++ };
++
+ codec_clk: clk@01c20140 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec-clk";
diff --git a/target/linux/sunxi/patches-4.4/102-dt-sun7i-add-dram-gates.patch b/target/linux/sunxi/patches-4.4/102-dt-sun7i-add-dram-gates.patch
new file mode 100644
index 0000000..981ef5b
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/102-dt-sun7i-add-dram-gates.patch
@@ -0,0 +1,79 @@
+From 0b4bf5a5200b9ac5ddf545665f171feb5594677d Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Sat, 5 Dec 2015 21:16:46 +0800
+Subject: [PATCH] ARM: dts: sun7i: Add DRAM gates
+
+The DRAM gates controls direct memory access for some peripherals.
+These peripherals include the display pipeline, so add the required
+gates to the simplefb nodes as well.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/sun7i-a20.dtsi | 32 +++++++++++++++++++++++++++++---
+ 1 file changed, 29 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
+index e02eb72..21169c0 100644
+--- a/arch/arm/boot/dts/sun7i-a20.dtsi
++++ b/arch/arm/boot/dts/sun7i-a20.dtsi
+@@ -68,7 +68,7 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+- <&ahb_gates 44>;
++ <&ahb_gates 44>, <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -76,7 +76,8 @@
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
++ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
++ <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -85,7 +86,7 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+- <&ahb_gates 44>;
++ <&ahb_gates 44>, <&dram_gates 26>;
+ status = "disabled";
+ };
+ };
+@@ -501,6 +502,31 @@
+ clock-output-names = "spi3";
+ };
+
++ dram_gates: clk@01c20100 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-dram-gates-clk";
++ reg = <0x01c20100 0x4>;
++ clocks = <&pll5 0>;
++ clock-indices = <0>,
++ <1>, <2>,
++ <3>,
++ <4>,
++ <5>, <6>,
++ <15>,
++ <24>, <25>,
++ <26>, <27>,
++ <28>, <29>;
++ clock-output-names = "dram_ve",
++ "dram_csi0", "dram_csi1",
++ "dram_ts",
++ "dram_tvd",
++ "dram_tve0", "dram_tve1",
++ "dram_output",
++ "dram_de_fe1", "dram_de_fe0",
++ "dram_de_be0", "dram_de_be1",
++ "dram_de_mp", "dram_ace";
++ };
++
+ codec_clk: clk@01c20140 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec-clk";
diff --git a/target/linux/sunxi/patches-4.4/103-clk-sunxi-add-h3-clksupport.patch b/target/linux/sunxi/patches-4.4/103-clk-sunxi-add-h3-clksupport.patch
new file mode 100644
index 0000000..04a536f
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/103-clk-sunxi-add-h3-clksupport.patch
@@ -0,0 +1,189 @@
+From ab6e23a4e388f5f2696b8e92c350f845142da118 Mon Sep 17 00:00:00 2001
+From: Jens Kuske <jenskuske@gmail.com>
+Date: Fri, 4 Dec 2015 22:24:40 +0100
+Subject: [PATCH] clk: sunxi: Add H3 clocks support
+
+The H3 clock control unit is similar to the those of other sun8i family
+members like the A23.
+
+It adds a new bus gates clock similar to the simple gates, but with a
+different parent clock for each single gate.
+Some of the gates use the new AHB2 clock as parent, whose clock source
+is muxable between AHB1 and PLL6/2. The documentation isn't totally clear
+about which devices belong to AHB2 now, especially USB EHIC/OHIC, so it
+is mostly based on Allwinner kernel source code.
+
+Signed-off-by: Jens Kuske <jenskuske@gmail.com>
+Acked-by: Rob Herring <robh@kernel.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ Documentation/devicetree/bindings/clock/sunxi.txt | 2 +
+ drivers/clk/sunxi/Makefile | 1 +
+ drivers/clk/sunxi/clk-sun8i-bus-gates.c | 112 ++++++++++++++++++++++
+ drivers/clk/sunxi/clk-sunxi.c | 6 ++
+ 4 files changed, 121 insertions(+)
+ create mode 100644 drivers/clk/sunxi/clk-sun8i-bus-gates.c
+
+diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
+index ef0b452..014eab8 100644
+diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
+index 103efab..abf4916 100644
+--- a/drivers/clk/sunxi/Makefile
++++ b/drivers/clk/sunxi/Makefile
+@@ -10,6 +10,7 @@ obj-y += clk-a10-pll2.o
+ obj-y += clk-a20-gmac.o
+ obj-y += clk-mod0.o
+ obj-y += clk-simple-gates.o
++obj-y += clk-sun8i-bus-gates.o
+ obj-y += clk-sun8i-mbus.o
+ obj-y += clk-sun9i-core.o
+ obj-y += clk-sun9i-mmc.o
+diff --git a/drivers/clk/sunxi/clk-sun8i-bus-gates.c b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
+new file mode 100644
+index 0000000..7ab60c5
+--- /dev/null
++++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
+@@ -0,0 +1,112 @@
++/*
++ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
++ *
++ * Based on clk-simple-gates.c, which is:
++ * Copyright 2015 Maxime Ripard
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/clk-provider.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++static DEFINE_SPINLOCK(gates_lock);
++
++static void __init sun8i_h3_bus_gates_init(struct device_node *node)
++{
++ static const char * const names[] = { "ahb1", "ahb2", "apb1", "apb2" };
++ enum { AHB1, AHB2, APB1, APB2, PARENT_MAX } clk_parent;
++ const char *parents[PARENT_MAX];
++ struct clk_onecell_data *clk_data;
++ const char *clk_name;
++ struct property *prop;
++ struct resource res;
++ void __iomem *clk_reg;
++ void __iomem *reg;
++ const __be32 *p;
++ int number, i;
++ u8 clk_bit;
++ u32 index;
++
++ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
++ if (IS_ERR(reg))
++ return;
++
++ for (i = 0; i < ARRAY_SIZE(names); i++) {
++ index = of_property_match_string(node, "clock-names",
++ names[i]);
++ if (index < 0)
++ return;
++
++ parents[i] = of_clk_get_parent_name(node, index);
++ }
++
++ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
++ if (!clk_data)
++ goto err_unmap;
++
++ number = of_property_count_u32_elems(node, "clock-indices");
++ of_property_read_u32_index(node, "clock-indices", number - 1, &number);
++
++ clk_data->clks = kcalloc(number + 1, sizeof(struct clk *), GFP_KERNEL);
++ if (!clk_data->clks)
++ goto err_free_data;
++
++ i = 0;
++ of_property_for_each_u32(node, "clock-indices", prop, p, index) {
++ of_property_read_string_index(node, "clock-output-names",
++ i, &clk_name);
++
++ if (index == 17 || (index >= 29 && index <= 31))
++ clk_parent = AHB2;
++ else if (index <= 63 || index >= 128)
++ clk_parent = AHB1;
++ else if (index >= 64 && index <= 95)
++ clk_parent = APB1;
++ else if (index >= 96 && index <= 127)
++ clk_parent = APB2;
++
++ clk_reg = reg + 4 * (index / 32);
++ clk_bit = index % 32;
++
++ clk_data->clks[index] = clk_register_gate(NULL, clk_name,
++ parents[clk_parent],
++ 0, clk_reg, clk_bit,
++ 0, &gates_lock);
++ i++;
++
++ if (IS_ERR(clk_data->clks[index])) {
++ WARN_ON(true);
++ continue;
++ }
++ }
++
++ clk_data->clk_num = number + 1;
++ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
++
++ return;
++
++err_free_data:
++ kfree(clk_data);
++err_unmap:
++ iounmap(reg);
++ of_address_to_resource(node, 0, &res);
++ release_mem_region(res.start, resource_size(&res));
++}
++
++CLK_OF_DECLARE(sun8i_h3_bus_gates, "allwinner,sun8i-h3-bus-gates-clk",
++ sun8i_h3_bus_gates_init);
+diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
+index 9c79af0c..5ba2188 100644
+--- a/drivers/clk/sunxi/clk-sunxi.c
++++ b/drivers/clk/sunxi/clk-sunxi.c
+@@ -778,6 +778,10 @@ static const struct mux_data sun6i_a31_ahb1_mux_data __initconst = {
+ .shift = 12,
+ };
+
++static const struct mux_data sun8i_h3_ahb2_mux_data __initconst = {
++ .shift = 0,
++};
++
+ static void __init sunxi_mux_clk_setup(struct device_node *node,
+ struct mux_data *data)
+ {
+@@ -1130,6 +1134,7 @@ static const struct of_device_id clk_divs_match[] __initconst = {
+ static const struct of_device_id clk_mux_match[] __initconst = {
+ {.compatible = "allwinner,sun4i-a10-cpu-clk", .data = &sun4i_cpu_mux_data,},
+ {.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
++ {.compatible = "allwinner,sun8i-h3-ahb2-clk", .data = &sun8i_h3_ahb2_mux_data,},
+ {}
+ };
+
+@@ -1212,6 +1217,7 @@ CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks);
+ CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks);
+ CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks);
+ CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks);
++CLK_OF_DECLARE(sun8i_h3_clk_init, "allwinner,sun8i-h3", sun6i_init_clocks);
+
+ static void __init sun9i_init_clocks(struct device_node *node)
+ {
diff --git a/target/linux/sunxi/patches-4.4/104-1-dt-sunxi-add-h3-dtsi.patch b/target/linux/sunxi/patches-4.4/104-1-dt-sunxi-add-h3-dtsi.patch
new file mode 100644
index 0000000..19e957b
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/104-1-dt-sunxi-add-h3-dtsi.patch
@@ -0,0 +1,518 @@
+From 318d93bc41823e86967c8251eef0444a72e4d687 Mon Sep 17 00:00:00 2001
+From: Jens Kuske <jenskuske@gmail.com>
+Date: Fri, 4 Dec 2015 22:24:42 +0100
+Subject: [PATCH] ARM: dts: sunxi: Add Allwinner H3 DTSI
+
+The Allwinner H3 is a home entertainment system oriented SoC with
+four Cortex-A7 cores and a Mali-400MP2 GPU.
+
+Signed-off-by: Jens Kuske <jenskuske@gmail.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/sun8i-h3.dtsi | 497 ++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 497 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun8i-h3.dtsi
+
+diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
+new file mode 100644
+index 0000000..1524130e
+--- /dev/null
++++ b/arch/arm/boot/dts/sun8i-h3.dtsi
+@@ -0,0 +1,497 @@
++/*
++ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include "skeleton.dtsi"
++
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ interrupt-parent = <&gic>;
++
++ cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ cpu@0 {
++ compatible = "arm,cortex-a7";
++ device_type = "cpu";
++ reg = <0>;
++ };
++
++ cpu@1 {
++ compatible = "arm,cortex-a7";
++ device_type = "cpu";
++ reg = <1>;
++ };
++
++ cpu@2 {
++ compatible = "arm,cortex-a7";
++ device_type = "cpu";
++ reg = <2>;
++ };
++
++ cpu@3 {
++ compatible = "arm,cortex-a7";
++ device_type = "cpu";
++ reg = <3>;
++ };
++ };
++
++ timer {
++ compatible = "arm,armv7-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ clocks {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ osc24M: osc24M_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++ clock-frequency = <24000000>;
++ clock-output-names = "osc24M";
++ };
++
++ osc32k: osc32k_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++ clock-frequency = <32768>;
++ clock-output-names = "osc32k";
++ };
++
++ pll1: clk@01c20000 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun8i-a23-pll1-clk";
++ reg = <0x01c20000 0x4>;
++ clocks = <&osc24M>;
++ clock-output-names = "pll1";
++ };
++
++ /* dummy clock until actually implemented */
++ pll5: pll5_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++ clock-frequency = <0>;
++ clock-output-names = "pll5";
++ };
++
++ pll6: clk@01c20028 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun6i-a31-pll6-clk";
++ reg = <0x01c20028 0x4>;
++ clocks = <&osc24M>;
++ clock-output-names = "pll6", "pll6x2";
++ };
++
++ pll6d2: pll6d2_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clock-div = <2>;
++ clock-mult = <1>;
++ clocks = <&pll6 0>;
++ clock-output-names = "pll6d2";
++ };
++
++ /* dummy clock until pll6 can be reused */
++ pll8: pll8_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++ clock-frequency = <1>;
++ clock-output-names = "pll8";
++ };
++
++ cpu: cpu_clk@01c20050 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-cpu-clk";
++ reg = <0x01c20050 0x4>;
++ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
++ clock-output-names = "cpu";
++ };
++
++ axi: axi_clk@01c20050 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-axi-clk";
++ reg = <0x01c20050 0x4>;
++ clocks = <&cpu>;
++ clock-output-names = "axi";
++ };
++
++ ahb1: ahb1_clk@01c20054 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun6i-a31-ahb1-clk";
++ reg = <0x01c20054 0x4>;
++ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
++ clock-output-names = "ahb1";
++ };
++
++ ahb2: ahb2_clk@01c2005c {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun8i-h3-ahb2-clk";
++ reg = <0x01c2005c 0x4>;
++ clocks = <&ahb1>, <&pll6d2>;
++ clock-output-names = "ahb2";
++ };
++
++ apb1: apb1_clk@01c20054 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-apb0-clk";
++ reg = <0x01c20054 0x4>;
++ clocks = <&ahb1>;
++ clock-output-names = "apb1";
++ };
++
++ apb2: apb2_clk@01c20058 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-apb1-clk";
++ reg = <0x01c20058 0x4>;
++ clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
++ clock-output-names = "apb2";
++ };
++
++ bus_gates: clk@01c20060 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun8i-h3-bus-gates-clk";
++ reg = <0x01c20060 0x14>;
++ clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
++ clock-names = "ahb1", "ahb2", "apb1", "apb2";
++ clock-indices = <5>, <6>, <8>,
++ <9>, <10>, <13>,
++ <14>, <17>, <18>,
++ <19>, <20>,
++ <21>, <23>,
++ <24>, <25>,
++ <26>, <27>,
++ <28>, <29>,
++ <30>, <31>, <32>,
++ <35>, <36>, <37>,
++ <40>, <41>, <43>,
++ <44>, <52>, <53>,
++ <54>, <64>,
++ <65>, <69>, <72>,
++ <76>, <77>, <78>,
++ <96>, <97>, <98>,
++ <112>, <113>,
++ <114>, <115>,
++ <116>, <128>, <135>;
++ clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
++ "bus_mmc1", "bus_mmc2", "bus_nand",
++ "bus_sdram", "bus_gmac", "bus_ts",
++ "bus_hstimer", "bus_spi0",
++ "bus_spi1", "bus_otg",
++ "bus_otg_ehci0", "bus_ehci1",
++ "bus_ehci2", "bus_ehci3",
++ "bus_otg_ohci0", "bus_ohci1",
++ "bus_ohci2", "bus_ohci3", "bus_ve",
++ "bus_lcd0", "bus_lcd1", "bus_deint",
++ "bus_csi", "bus_tve", "bus_hdmi",
++ "bus_de", "bus_gpu", "bus_msgbox",
++ "bus_spinlock", "bus_codec",
++ "bus_spdif", "bus_pio", "bus_ths",
++ "bus_i2s0", "bus_i2s1", "bus_i2s2",
++ "bus_i2c0", "bus_i2c1", "bus_i2c2",
++ "bus_uart0", "bus_uart1",
++ "bus_uart2", "bus_uart3",
++ "bus_scr", "bus_ephy", "bus_dbg";
++ };
++
++ mmc0_clk: clk@01c20088 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-mmc-clk";
++ reg = <0x01c20088 0x4>;
++ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
++ clock-output-names = "mmc0",
++ "mmc0_output",
++ "mmc0_sample";
++ };
++
++ mmc1_clk: clk@01c2008c {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-mmc-clk";
++ reg = <0x01c2008c 0x4>;
++ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
++ clock-output-names = "mmc1",
++ "mmc1_output",
++ "mmc1_sample";
++ };
++
++ mmc2_clk: clk@01c20090 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-mmc-clk";
++ reg = <0x01c20090 0x4>;
++ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
++ clock-output-names = "mmc2",
++ "mmc2_output",
++ "mmc2_sample";
++ };
++
++ mbus_clk: clk@01c2015c {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun8i-a23-mbus-clk";
++ reg = <0x01c2015c 0x4>;
++ clocks = <&osc24M>, <&pll6 1>, <&pll5>;
++ clock-output-names = "mbus";
++ };
++ };
++
++ soc {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ dma: dma-controller@01c02000 {
++ compatible = "allwinner,sun8i-h3-dma";
++ reg = <0x01c02000 0x1000>;
++ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&bus_gates 6>;
++ resets = <&ahb_rst 6>;
++ #dma-cells = <1>;
++ };
++
++ mmc0: mmc@01c0f000 {
++ compatible = "allwinner,sun5i-a13-mmc";
++ reg = <0x01c0f000 0x1000>;
++ clocks = <&bus_gates 8>,
++ <&mmc0_clk 0>,
++ <&mmc0_clk 1>,
++ <&mmc0_clk 2>;
++ clock-names = "ahb",
++ "mmc",
++ "output",
++ "sample";
++ resets = <&ahb_rst 8>;
++ reset-names = "ahb";
++ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ mmc1: mmc@01c10000 {
++ compatible = "allwinner,sun5i-a13-mmc";
++ reg = <0x01c10000 0x1000>;
++ clocks = <&bus_gates 9>,
++ <&mmc1_clk 0>,
++ <&mmc1_clk 1>,
++ <&mmc1_clk 2>;
++ clock-names = "ahb",
++ "mmc",
++ "output",
++ "sample";
++ resets = <&ahb_rst 9>;
++ reset-names = "ahb";
++ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ mmc2: mmc@01c11000 {
++ compatible = "allwinner,sun5i-a13-mmc";
++ reg = <0x01c11000 0x1000>;
++ clocks = <&bus_gates 10>,
++ <&mmc2_clk 0>,
++ <&mmc2_clk 1>,
++ <&mmc2_clk 2>;
++ clock-names = "ahb",
++ "mmc",
++ "output",
++ "sample";
++ resets = <&ahb_rst 10>;
++ reset-names = "ahb";
++ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ pio: pinctrl@01c20800 {
++ compatible = "allwinner,sun8i-h3-pinctrl";
++ reg = <0x01c20800 0x400>;
++ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&bus_gates 69>;
++ gpio-controller;
++ #gpio-cells = <3>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++
++ uart0_pins_a: uart0@0 {
++ allwinner,pins = "PA4", "PA5";
++ allwinner,function = "uart0";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ mmc0_pins_a: mmc0@0 {
++ allwinner,pins = "PF0", "PF1", "PF2", "PF3",
++ "PF4", "PF5";
++ allwinner,function = "mmc0";
++ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ mmc0_cd_pin: mmc0_cd_pin@0 {
++ allwinner,pins = "PF6";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ mmc1_pins_a: mmc1@0 {
++ allwinner,pins = "PG0", "PG1", "PG2", "PG3",
++ "PG4", "PG5";
++ allwinner,function = "mmc1";
++ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++ };
++
++ ahb_rst: reset@01c202c0 {
++ #reset-cells = <1>;
++ compatible = "allwinner,sun6i-a31-ahb1-reset";
++ reg = <0x01c202c0 0xc>;
++ };
++
++ apb1_rst: reset@01c202d0 {
++ #reset-cells = <1>;
++ compatible = "allwinner,sun6i-a31-clock-reset";
++ reg = <0x01c202d0 0x4>;
++ };
++
++ apb2_rst: reset@01c202d8 {
++ #reset-cells = <1>;
++ compatible = "allwinner,sun6i-a31-clock-reset";
++ reg = <0x01c202d8 0x4>;
++ };
++
++ timer@01c20c00 {
++ compatible = "allwinner,sun4i-a10-timer";
++ reg = <0x01c20c00 0xa0>;
++ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&osc24M>;
++ };
++
++ wdt0: watchdog@01c20ca0 {
++ compatible = "allwinner,sun6i-a31-wdt";
++ reg = <0x01c20ca0 0x20>;
++ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ uart0: serial@01c28000 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x01c28000 0x400>;
++ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
++ reg-shift = <2>;
++ reg-io-width = <4>;
++ clocks = <&bus_gates 112>;
++ resets = <&apb2_rst 16>;
++ dmas = <&dma 6>, <&dma 6>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ uart1: serial@01c28400 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x01c28400 0x400>;
++ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
++ reg-shift = <2>;
++ reg-io-width = <4>;
++ clocks = <&bus_gates 113>;
++ resets = <&apb2_rst 17>;
++ dmas = <&dma 7>, <&dma 7>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ uart2: serial@01c28800 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x01c28800 0x400>;
++ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
++ reg-shift = <2>;
++ reg-io-width = <4>;
++ clocks = <&bus_gates 114>;
++ resets = <&apb2_rst 18>;
++ dmas = <&dma 8>, <&dma 8>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ uart3: serial@01c28c00 {
++ compatible = "snps,dw-apb-uart";
++ reg = <0x01c28c00 0x400>;
++ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
++ reg-shift = <2>;
++ reg-io-width = <4>;
++ clocks = <&bus_gates 115>;
++ resets = <&apb2_rst 19>;
++ dmas = <&dma 9>, <&dma 9>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
++ gic: interrupt-controller@01c81000 {
++ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
++ reg = <0x01c81000 0x1000>,
++ <0x01c82000 0x1000>,
++ <0x01c84000 0x2000>,
++ <0x01c86000 0x2000>;
++ interrupt-controller;
++ #interrupt-cells = <3>;
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
++ };
++
++ rtc: rtc@01f00000 {
++ compatible = "allwinner,sun6i-a31-rtc";
++ reg = <0x01f00000 0x54>;
++ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
++ };
++ };
++};
diff --git a/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch b/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch
new file mode 100644
index 0000000..589a858
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch
@@ -0,0 +1,116 @@
+From dfcf8196de7411a5e7fd49795938b1bc8c56859c Mon Sep 17 00:00:00 2001
+From: Jens Kuske <jenskuske@gmail.com>
+Date: Fri, 4 Dec 2015 22:24:43 +0100
+Subject: [PATCH] ARM: dts: sun8i: Add Orange Pi Plus support
+
+The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
+with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
+a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
+WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
+and a 40-pin GPIO header.
+
+Signed-off-by: Jens Kuske <jenskuske@gmail.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/Makefile | 3 +-
+ arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++++++++++++++++++++++++++
+ 2 files changed, 79 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index e8f44c7..cc7309b 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -661,7 +661,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
+ sun8i-a33-ga10h-v1.1.dtb \
+ sun8i-a33-ippo-q8h-v1.2.dtb \
+ sun8i-a33-q8-tablet.dtb \
+- sun8i-a33-sinlinx-sina33.dtb
++ sun8i-a33-sinlinx-sina33.dtb \
++ sun8i-h3-orangepi-plus.dtb
+ dtb-$(CONFIG_MACH_SUN9I) += \
+ sun9i-a80-optimus.dtb \
+ sun9i-a80-cubieboard4.dtb
+diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+new file mode 100644
+index 0000000..e67df59
+--- /dev/null
++++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+@@ -0,0 +1,77 @@
++/*
++ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun8i-h3.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "Xunlong Orange Pi Plus";
++ compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
++ vmmc-supply = <&reg_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
++ cd-inverted;
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
diff --git a/target/linux/sunxi/patches-4.4/105-phy-use_of_match_node.patch b/target/linux/sunxi/patches-4.4/105-phy-use_of_match_node.patch
new file mode 100644
index 0000000..970de98
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/105-phy-use_of_match_node.patch
@@ -0,0 +1,220 @@
+From 5c627d8e7660c170c591ef281184fd11d0493440 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Fri, 11 Dec 2015 16:32:17 +0100
+Subject: [PATCH] phy-sun4i-usb: Use of_match_node to get model specific config
+ data
+
+Use of_match_node instead of calling of_device_is_compatible a ton of
+times to get model specific config data.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
+---
+ drivers/phy/phy-sun4i-usb.c | 121 +++++++++++++++++++++++++++++---------------
+ 1 file changed, 79 insertions(+), 42 deletions(-)
+
+diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
+index b12964b..35b1fa3 100644
+--- a/drivers/phy/phy-sun4i-usb.c
++++ b/drivers/phy/phy-sun4i-usb.c
+@@ -32,6 +32,7 @@
+ #include <linux/mutex.h>
+ #include <linux/of.h>
+ #include <linux/of_address.h>
++#include <linux/of_device.h>
+ #include <linux/of_gpio.h>
+ #include <linux/phy/phy.h>
+ #include <linux/phy/phy-sun4i-usb.h>
+@@ -88,12 +89,23 @@
+ #define DEBOUNCE_TIME msecs_to_jiffies(50)
+ #define POLL_TIME msecs_to_jiffies(250)
+
++enum sun4i_usb_phy_type {
++ sun4i_a10_phy,
++ sun8i_a33_phy,
++};
++
++struct sun4i_usb_phy_cfg {
++ int num_phys;
++ enum sun4i_usb_phy_type type;
++ u32 disc_thresh;
++ u8 phyctl_offset;
++ bool dedicated_clocks;
++};
++
+ struct sun4i_usb_phy_data {
+ void __iomem *base;
++ const struct sun4i_usb_phy_cfg *cfg;
+ struct mutex mutex;
+- int num_phys;
+- u32 disc_thresh;
+- bool has_a33_phyctl;
+ struct sun4i_usb_phy {
+ struct phy *phy;
+ void __iomem *pmu;
+@@ -159,17 +171,14 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
+ {
+ struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
+ u32 temp, usbc_bit = BIT(phy->index * 2);
+- void *phyctl;
++ void *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
+ int i;
+
+ mutex_lock(&phy_data->mutex);
+
+- if (phy_data->has_a33_phyctl) {
+- phyctl = phy_data->base + REG_PHYCTL_A33;
++ if (phy_data->cfg->type == sun8i_a33_phy) {
+ /* A33 needs us to set phyctl to 0 explicitly */
+ writel(0, phyctl);
+- } else {
+- phyctl = phy_data->base + REG_PHYCTL_A10;
+ }
+
+ for (i = 0; i < len; i++) {
+@@ -249,7 +258,8 @@ static int sun4i_usb_phy_init(struct phy *_phy)
+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+
+ /* Disconnect threshold adjustment */
+- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2);
++ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
++ data->cfg->disc_thresh, 2);
+
+ sun4i_usb_phy_passby(phy, 1);
+
+@@ -476,7 +486,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
+ {
+ struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
+
+- if (args->args[0] >= data->num_phys)
++ if (args->args[0] >= data->cfg->num_phys)
+ return ERR_PTR(-ENODEV);
+
+ return data->phys[args->args[0]].phy;
+@@ -511,7 +521,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct phy_provider *phy_provider;
+- bool dedicated_clocks;
+ struct resource *res;
+ int i, ret;
+
+@@ -522,29 +531,9 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+ mutex_init(&data->mutex);
+ INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
+ dev_set_drvdata(dev, data);
+-
+- if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
+- of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
+- of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
+- data->num_phys = 2;
+- else
+- data->num_phys = 3;
+-
+- if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
+- of_device_is_compatible(np, "allwinner,sun7i-a20-usb-phy"))
+- data->disc_thresh = 2;
+- else
+- data->disc_thresh = 3;
+-
+- if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy") ||
+- of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
+- of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
+- dedicated_clocks = true;
+- else
+- dedicated_clocks = false;
+-
+- if (of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
+- data->has_a33_phyctl = true;
++ data->cfg = of_device_get_match_data(dev);
++ if (!data->cfg)
++ return -EINVAL;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
+ data->base = devm_ioremap_resource(dev, res);
+@@ -590,7 +579,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+ }
+ }
+
+- for (i = 0; i < data->num_phys; i++) {
++ for (i = 0; i < data->cfg->num_phys; i++) {
+ struct sun4i_usb_phy *phy = data->phys + i;
+ char name[16];
+
+@@ -602,7 +591,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+ phy->vbus = NULL;
+ }
+
+- if (dedicated_clocks)
++ if (data->cfg->dedicated_clocks)
+ snprintf(name, sizeof(name), "usb%d_phy", i);
+ else
+ strlcpy(name, "usb_phy", sizeof(name));
+@@ -689,13 +678,61 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+ return 0;
+ }
+
++static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
++ .num_phys = 3,
++ .type = sun4i_a10_phy,
++ .disc_thresh = 3,
++ .phyctl_offset = REG_PHYCTL_A10,
++ .dedicated_clocks = false,
++};
++
++static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
++ .num_phys = 2,
++ .type = sun4i_a10_phy,
++ .disc_thresh = 2,
++ .phyctl_offset = REG_PHYCTL_A10,
++ .dedicated_clocks = false,
++};
++
++static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
++ .num_phys = 3,
++ .type = sun4i_a10_phy,
++ .disc_thresh = 3,
++ .phyctl_offset = REG_PHYCTL_A10,
++ .dedicated_clocks = true,
++};
++
++static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
++ .num_phys = 3,
++ .type = sun4i_a10_phy,
++ .disc_thresh = 2,
++ .phyctl_offset = REG_PHYCTL_A10,
++ .dedicated_clocks = false,
++};
++
++static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
++ .num_phys = 2,
++ .type = sun4i_a10_phy,
++ .disc_thresh = 3,
++ .phyctl_offset = REG_PHYCTL_A10,
++ .dedicated_clocks = true,
++};
++
++static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
++ .num_phys = 2,
++ .type = sun8i_a33_phy,
++ .disc_thresh = 3,
++ .phyctl_offset = REG_PHYCTL_A33,
++ .dedicated_clocks = true,
++};
++
+ static const struct of_device_id sun4i_usb_phy_of_match[] = {
+- { .compatible = "allwinner,sun4i-a10-usb-phy" },
+- { .compatible = "allwinner,sun5i-a13-usb-phy" },
+- { .compatible = "allwinner,sun6i-a31-usb-phy" },
+- { .compatible = "allwinner,sun7i-a20-usb-phy" },
+- { .compatible = "allwinner,sun8i-a23-usb-phy" },
+- { .compatible = "allwinner,sun8i-a33-usb-phy" },
++ { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
++ { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
++ { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
++ { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
++ { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
++ { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
+ { },
+ };
+ MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
diff --git a/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch b/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch
new file mode 100644
index 0000000..47c6332
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch
@@ -0,0 +1,126 @@
+From 317c5224795b41a08ba8c08573d74ba95096faa5 Mon Sep 17 00:00:00 2001
+From: Reinder de Haan <patchesrdh@mveas.com>
+Date: Fri, 11 Dec 2015 16:32:18 +0100
+Subject: [PATCH] phy-sun4i-usb: Add support for the host usb-phys found on the
+ H3 SoC
+
+Note this commit only adds support for phys 1-3, phy 0, the otg phy, is
+not yet (fully) supported after this commit.
+
+Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Rob Herring <robh@kernel.org>
+Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
+---
+ .../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
+ drivers/phy/phy-sun4i-usb.c | 41 +++++++++++++++++-----
+ 2 files changed, 33 insertions(+), 9 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+index 0cebf74..95736d7 100644
+--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
++++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+@@ -9,6 +9,7 @@ Required properties:
+ * allwinner,sun7i-a20-usb-phy
+ * allwinner,sun8i-a23-usb-phy
+ * allwinner,sun8i-a33-usb-phy
++ * allwinner,sun8i-h3-usb-phy
+ - reg : a list of offset + length pairs
+ - reg-names :
+ * "phy_ctrl"
+diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
+index 35b1fa3..bae54f7 100644
+--- a/drivers/phy/phy-sun4i-usb.c
++++ b/drivers/phy/phy-sun4i-usb.c
+@@ -47,6 +47,9 @@
+ #define REG_PHYBIST 0x08
+ #define REG_PHYTUNE 0x0c
+ #define REG_PHYCTL_A33 0x10
++#define REG_PHY_UNK_H3 0x20
++
++#define REG_PMU_UNK_H3 0x10
+
+ #define PHYCTL_DATA BIT(7)
+
+@@ -80,7 +83,7 @@
+ #define PHY_DISCON_TH_SEL 0x2a
+ #define PHY_SQUELCH_DETECT 0x3c
+
+-#define MAX_PHYS 3
++#define MAX_PHYS 4
+
+ /*
+ * Note do not raise the debounce time, we must report Vusb high within 100ms
+@@ -92,6 +95,7 @@
+ enum sun4i_usb_phy_type {
+ sun4i_a10_phy,
+ sun8i_a33_phy,
++ sun8i_h3_phy,
+ };
+
+ struct sun4i_usb_phy_cfg {
+@@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy *_phy)
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+ int ret;
++ u32 val;
+
+ ret = clk_prepare_enable(phy->clk);
+ if (ret)
+@@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy *_phy)
+ return ret;
+ }
+
+- /* Enable USB 45 Ohm resistor calibration */
+- if (phy->index == 0)
+- sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
++ if (data->cfg->type == sun8i_h3_phy) {
++ if (phy->index == 0) {
++ val = readl(data->base + REG_PHY_UNK_H3);
++ writel(val & ~1, data->base + REG_PHY_UNK_H3);
++ }
++
++ val = readl(phy->pmu + REG_PMU_UNK_H3);
++ writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
++ } else {
++ /* Enable USB 45 Ohm resistor calibration */
++ if (phy->index == 0)
++ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
+
+- /* Adjust PHY's magnitude and rate */
+- sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
++ /* Adjust PHY's magnitude and rate */
++ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+
+- /* Disconnect threshold adjustment */
+- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+- data->cfg->disc_thresh, 2);
++ /* Disconnect threshold adjustment */
++ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
++ data->cfg->disc_thresh, 2);
++ }
+
+ sun4i_usb_phy_passby(phy, 1);
+
+@@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
+ .dedicated_clocks = true,
+ };
+
++static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
++ .num_phys = 4,
++ .type = sun8i_h3_phy,
++ .disc_thresh = 3,
++ .dedicated_clocks = true,
++};
++
+ static const struct of_device_id sun4i_usb_phy_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
+ { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
+@@ -733,6 +755,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
+ { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
+ { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
+ { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
++ { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+ { },
+ };
+ MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
diff --git a/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch b/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch
new file mode 100644
index 0000000..7cd0a62
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch
@@ -0,0 +1,51 @@
+From 7bec0200ac214b5cba44e2c2c4385815be4b9f00 Mon Sep 17 00:00:00 2001
+From: Reinder de Haan <patchesrdh@mveas.com>
+Date: Sun, 15 Nov 2015 20:46:13 +0100
+Subject: [PATCH] clk: sunxi: Add support for the H3 usb phy clocks
+
+The H3 has a usb-phy clk register which is similar to that of earlier
+SoCs, but with support for a larger number of phys. So we can simply add
+a new set of clk-data and a new compatible and be done with it.
+
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+Acked-by: Rob Herring <robh@kernel.org>
+Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
+ drivers/clk/sunxi/clk-usb.c | 12 ++++++++++++
+ 2 files changed, 13 insertions(+)
+
+diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
+index 8a47b77..a94bb56 100644
+--- a/Documentation/devicetree/bindings/clock/sunxi.txt
++++ b/Documentation/devicetree/bindings/clock/sunxi.txt
+@@ -68,6 +68,7 @@ Required properties:
+ "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
+ "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
+ "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
++ "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
+ "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
+ "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
+
+diff --git a/drivers/clk/sunxi/clk-usb.c b/drivers/clk/sunxi/clk-usb.c
+index 1a72cd6..67b8e38 100644
+--- a/drivers/clk/sunxi/clk-usb.c
++++ b/drivers/clk/sunxi/clk-usb.c
+@@ -243,3 +243,15 @@ static void __init sun9i_a80_usb_phy_setup(struct device_node *node)
+ sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock);
+ }
+ CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup);
++
++static const struct usb_clk_data sun8i_h3_usb_clk_data __initconst = {
++ .clk_mask = BIT(19) | BIT(18) | BIT(17) | BIT(16) |
++ BIT(11) | BIT(10) | BIT(9) | BIT(8),
++ .reset_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
++};
++
++static void __init sun8i_h3_usb_setup(struct device_node *node)
++{
++ sunxi_usb_clk_setup(node, &sun8i_h3_usb_clk_data, &sun4i_a10_usb_lock);
++}
++CLK_OF_DECLARE(sun8i_h3_usb, "allwinner,sun8i-h3-usb-clk", sun8i_h3_usb_setup);
diff --git a/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch b/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch
new file mode 100644
index 0000000..12c9e5e
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch
@@ -0,0 +1,233 @@
+From 3cdd9f5c4953465abb87ec757159cc0576ae6b0a Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Sat, 5 Dec 2015 21:16:43 +0800
+Subject: [PATCH] clk: sunxi: Add VE (Video Engine) module clock driver for
+ sun[457]i
+
+The video engine has its own special module clock, consisting of a clock
+gate, configurable dividers, and a reset control.
+
+On later (sun[68]i) families, the reset control is moved out of this
+piece of hardware and grouped with reset controls of other peripherals.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Tested-by: Jens Kuske <jenskuske@gmail.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ Documentation/devicetree/bindings/clock/sunxi.txt | 4 +
+ drivers/clk/sunxi/Makefile | 1 +
+ drivers/clk/sunxi/clk-a10-ve.c | 171 ++++++++++++++++++++++
+ 3 files changed, 176 insertions(+)
+ create mode 100644 drivers/clk/sunxi/clk-a10-ve.c
+
+diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
+index 014eab8..e59f57b 100644
+--- a/Documentation/devicetree/bindings/clock/sunxi.txt
++++ b/Documentation/devicetree/bindings/clock/sunxi.txt
+@@ -76,6 +76,7 @@ Required properties:
+ "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
+ "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
+ "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
++ "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
+
+ Required properties for all clocks:
+ - reg : shall be the control register address for the clock.
+@@ -95,6 +96,9 @@ Required properties for all clocks:
+ And "allwinner,*-usb-clk" clocks also require:
+ - reset-cells : shall be set to 1
+
++The "allwinner,sun4i-a10-ve-clk" clock also requires:
++- reset-cells : shall be set to 0
++
+ The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
+ - #reset-cells : shall be set to 1
+ - resets : shall be the reset control phandle for the mmc block.
+diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
+index abf4916..1a909f9 100644
+--- a/drivers/clk/sunxi/Makefile
++++ b/drivers/clk/sunxi/Makefile
+@@ -7,6 +7,7 @@ obj-y += clk-a10-codec.o
+ obj-y += clk-a10-hosc.o
+ obj-y += clk-a10-mod1.o
+ obj-y += clk-a10-pll2.o
++obj-y += clk-a10-ve.o
+ obj-y += clk-a20-gmac.o
+ obj-y += clk-mod0.o
+ obj-y += clk-simple-gates.o
+diff --git a/drivers/clk/sunxi/clk-a10-ve.c b/drivers/clk/sunxi/clk-a10-ve.c
+new file mode 100644
+index 0000000..044c171
+--- /dev/null
++++ b/drivers/clk/sunxi/clk-a10-ve.c
+@@ -0,0 +1,171 @@
++/*
++ * Copyright 2015 Chen-Yu Tsai
++ *
++ * Chen-Yu Tsai <wens@csie.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/reset-controller.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++static DEFINE_SPINLOCK(ve_lock);
++
++#define SUN4I_VE_ENABLE 31
++#define SUN4I_VE_DIVIDER_SHIFT 16
++#define SUN4I_VE_DIVIDER_WIDTH 3
++#define SUN4I_VE_RESET 0
++
++/**
++ * sunxi_ve_reset... - reset bit in ve clk registers handling
++ */
++
++struct ve_reset_data {
++ void __iomem *reg;
++ spinlock_t *lock;
++ struct reset_controller_dev rcdev;
++};
++
++static int sunxi_ve_reset_assert(struct reset_controller_dev *rcdev,
++ unsigned long id)
++{
++ struct ve_reset_data *data = container_of(rcdev,
++ struct ve_reset_data,
++ rcdev);
++ unsigned long flags;
++ u32 reg;
++
++ spin_lock_irqsave(data->lock, flags);
++
++ reg = readl(data->reg);
++ writel(reg & ~BIT(SUN4I_VE_RESET), data->reg);
++
++ spin_unlock_irqrestore(data->lock, flags);
++
++ return 0;
++}
++
++static int sunxi_ve_reset_deassert(struct reset_controller_dev *rcdev,
++ unsigned long id)
++{
++ struct ve_reset_data *data = container_of(rcdev,
++ struct ve_reset_data,
++ rcdev);
++ unsigned long flags;
++ u32 reg;
++
++ spin_lock_irqsave(data->lock, flags);
++
++ reg = readl(data->reg);
++ writel(reg | BIT(SUN4I_VE_RESET), data->reg);
++
++ spin_unlock_irqrestore(data->lock, flags);
++
++ return 0;
++}
++
++static int sunxi_ve_of_xlate(struct reset_controller_dev *rcdev,
++ const struct of_phandle_args *reset_spec)
++{
++ if (WARN_ON(reset_spec->args_count != 0))
++ return -EINVAL;
++
++ return 0;
++}
++
++static struct reset_control_ops sunxi_ve_reset_ops = {
++ .assert = sunxi_ve_reset_assert,
++ .deassert = sunxi_ve_reset_deassert,
++};
++
++static void __init sun4i_ve_clk_setup(struct device_node *node)
++{
++ struct clk *clk;
++ struct clk_divider *div;
++ struct clk_gate *gate;
++ struct ve_reset_data *reset_data;
++ const char *parent;
++ const char *clk_name = node->name;
++ void __iomem *reg;
++ int err;
++
++ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
++ if (IS_ERR(reg))
++ return;
++
++ div = kzalloc(sizeof(*div), GFP_KERNEL);
++ if (!div)
++ goto err_unmap;
++
++ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
++ if (!gate)
++ goto err_free_div;
++
++ of_property_read_string(node, "clock-output-names", &clk_name);
++ parent = of_clk_get_parent_name(node, 0);
++
++ gate->reg = reg;
++ gate->bit_idx = SUN4I_VE_ENABLE;
++ gate->lock = &ve_lock;
++
++ div->reg = reg;
++ div->shift = SUN4I_VE_DIVIDER_SHIFT;
++ div->width = SUN4I_VE_DIVIDER_WIDTH;
++ div->lock = &ve_lock;
++
++ clk = clk_register_composite(NULL, clk_name, &parent, 1,
++ NULL, NULL,
++ &div->hw, &clk_divider_ops,
++ &gate->hw, &clk_gate_ops,
++ CLK_SET_RATE_PARENT);
++ if (IS_ERR(clk))
++ goto err_free_gate;
++
++ err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
++ if (err)
++ goto err_unregister_clk;
++
++ reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
++ if (!reset_data)
++ goto err_del_provider;
++
++ reset_data->reg = reg;
++ reset_data->lock = &ve_lock;
++ reset_data->rcdev.nr_resets = 1;
++ reset_data->rcdev.ops = &sunxi_ve_reset_ops;
++ reset_data->rcdev.of_node = node;
++ reset_data->rcdev.of_xlate = sunxi_ve_of_xlate;
++ reset_data->rcdev.of_reset_n_cells = 0;
++ err = reset_controller_register(&reset_data->rcdev);
++ if (err)
++ goto err_free_reset;
++
++ return;
++
++err_free_reset:
++ kfree(reset_data);
++err_del_provider:
++ of_clk_del_provider(node);
++err_unregister_clk:
++ clk_unregister(clk);
++err_free_gate:
++ kfree(gate);
++err_free_div:
++ kfree(div);
++err_unmap:
++ iounmap(reg);
++}
++CLK_OF_DECLARE(sun4i_ve, "allwinner,sun4i-a10-ve-clk",
++ sun4i_ve_clk_setup);
diff --git a/target/linux/sunxi/patches-4.4/111-1-dt-sun4i-add-ve-clock-module.patch b/target/linux/sunxi/patches-4.4/111-1-dt-sun4i-add-ve-clock-module.patch
new file mode 100644
index 0000000..f24711e
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/111-1-dt-sun4i-add-ve-clock-module.patch
@@ -0,0 +1,34 @@
+From 1ccc4939220cf815c309feddcf82dba260499194 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Sat, 5 Dec 2015 21:16:45 +0800
+Subject: [PATCH] ARM: dts: sun4i: Add VE (Video Engine) module clock node
+
+The video engine has its own module clock, which also includes a
+reset control for it.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
+index 849d024..2c8f5e6 100644
+--- a/arch/arm/boot/dts/sun4i-a10.dtsi
++++ b/arch/arm/boot/dts/sun4i-a10.dtsi
+@@ -520,6 +520,15 @@
+ "dram_de_mp", "dram_ace";
+ };
+
++ ve_clk: clk@01c2013c {
++ #clock-cells = <0>;
++ #reset-cells = <0>;
++ compatible = "allwinner,sun4i-a10-ve-clk";
++ reg = <0x01c2013c 0x4>;
++ clocks = <&pll4>;
++ clock-output-names = "ve";
++ };
++
+ codec_clk: clk@01c20140 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec-clk";
diff --git a/target/linux/sunxi/patches-4.4/111-2-dt-sun7i-add-ve-clock-module.patch b/target/linux/sunxi/patches-4.4/111-2-dt-sun7i-add-ve-clock-module.patch
new file mode 100644
index 0000000..bac58d0
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/111-2-dt-sun7i-add-ve-clock-module.patch
@@ -0,0 +1,34 @@
+From f0571ab140723f9a898d4a404118580534dcc468 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Sat, 5 Dec 2015 21:16:47 +0800
+Subject: [PATCH] ARM: dts: sun7i: Add VE (Video Engine) module clock node
+
+The video engine has its own module clock, which also includes a
+reset control for it.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
+index 21169c0..0940a78 100644
+--- a/arch/arm/boot/dts/sun7i-a20.dtsi
++++ b/arch/arm/boot/dts/sun7i-a20.dtsi
+@@ -527,6 +527,15 @@
+ "dram_de_mp", "dram_ace";
+ };
+
++ ve_clk: clk@01c2013c {
++ #clock-cells = <0>;
++ #reset-cells = <0>;
++ compatible = "allwinner,sun4i-a10-ve-clk";
++ reg = <0x01c2013c 0x4>;
++ clocks = <&pll4>;
++ clock-output-names = "ve";
++ };
++
+ codec_clk: clk@01c20140 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-codec-clk";
diff --git a/target/linux/sunxi/patches-4.4/115-musb-ignore-vbus-errors.patch b/target/linux/sunxi/patches-4.4/115-musb-ignore-vbus-errors.patch
new file mode 100644
index 0000000..3814e34
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/115-musb-ignore-vbus-errors.patch
@@ -0,0 +1,28 @@
+From fce20ac5d8c98f1a8ea5298051d9fa669e455f04 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Tue, 4 Aug 2015 23:22:45 +0200
+Subject: [PATCH] musb: sunxi: Ignore VBus errors in host-only mode
+
+For some unclear reason sometimes we get VBus errors in host-only mode,
+even though we do not have any vbus-detection then. Ignore these.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ drivers/usb/musb/sunxi.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
+index d9b0dc4..4b472b8 100644
+--- a/drivers/usb/musb/sunxi.c
++++ b/drivers/usb/musb/sunxi.c
+@@ -194,6 +194,10 @@ static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci)
+ musb_writeb(musb->mregs, MUSB_FADDR, 0);
+ }
+
++ /* Ignore Vbus errors when in host only mode */
++ if (musb->port_mode == MUSB_PORT_MODE_HOST)
++ musb->int_usb &= ~MUSB_INTR_VBUSERROR;
++
+ musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX);
+ if (musb->int_tx)
+ writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX);
diff --git a/target/linux/sunxi/patches-4.4/116-crypto-add-missing-statesize.patch b/target/linux/sunxi/patches-4.4/116-crypto-add-missing-statesize.patch
new file mode 100644
index 0000000..3dfa60c
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/116-crypto-add-missing-statesize.patch
@@ -0,0 +1,39 @@
+From 4f9ea86604e3ba64edd2817795798168fbb3c1a6 Mon Sep 17 00:00:00 2001
+From: LABBE Corentin <clabbe.montjoie@gmail.com>
+Date: Mon, 16 Nov 2015 09:35:54 +0100
+Subject: [PATCH] crypto: sun4i-ss - add missing statesize
+
+sun4i-ss implementaton of md5/sha1 is via ahash algorithms.
+Commit 8996eafdcbad ("crypto: ahash - ensure statesize is non-zero")
+made impossible to load them without giving statesize. This patch
+specifiy statesize for sha1 and md5.
+
+Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
+Cc: <stable@vger.kernel.org> # v4.3+
+Tested-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/sunxi-ss/sun4i-ss-core.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
+index eab6fe2..107cd2a 100644
+--- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
++++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
+@@ -39,6 +39,7 @@ static struct sun4i_ss_alg_template ss_algs[] = {
+ .import = sun4i_hash_import_md5,
+ .halg = {
+ .digestsize = MD5_DIGEST_SIZE,
++ .statesize = sizeof(struct md5_state),
+ .base = {
+ .cra_name = "md5",
+ .cra_driver_name = "md5-sun4i-ss",
+@@ -66,6 +67,7 @@ static struct sun4i_ss_alg_template ss_algs[] = {
+ .import = sun4i_hash_import_sha1,
+ .halg = {
+ .digestsize = SHA1_DIGEST_SIZE,
++ .statesize = sizeof(struct sha1_state),
+ .base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "sha1-sun4i-ss",
diff --git a/target/linux/sunxi/patches-4.4/130-pinctrl-sunxi-add-h3-pio.patch b/target/linux/sunxi/patches-4.4/130-pinctrl-sunxi-add-h3-pio.patch
new file mode 100644
index 0000000..37921fa
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/130-pinctrl-sunxi-add-h3-pio.patch
@@ -0,0 +1,577 @@
+From 03b83828e452418c18ba506e3e02b5deadbb53fa Mon Sep 17 00:00:00 2001
+From: Jens Kuske <jenskuske@gmail.com>
+Date: Tue, 27 Oct 2015 17:50:23 +0100
+Subject: [PATCH] pinctrl: sunxi: Add H3 PIO controller support
+
+The H3 uses the same pin controller as previous SoC's from Allwinner.
+Add support for the pins controlled by the main PIO controller.
+
+Signed-off-by: Jens Kuske <jenskuske@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
+ drivers/pinctrl/sunxi/Kconfig | 4 +
+ drivers/pinctrl/sunxi/Makefile | 1 +
+ drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 516 +++++++++++++++++++++
+ 4 files changed, 522 insertions(+)
+ create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
+
+diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+index b321b26..e6ba602 100644
+--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
++++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+@@ -18,6 +18,7 @@ Required properties:
+ "allwinner,sun8i-a23-r-pinctrl"
+ "allwinner,sun8i-a33-pinctrl"
+ "allwinner,sun8i-a83t-pinctrl"
++ "allwinner,sun8i-h3-pinctrl"
+
+ - reg: Should contain the register physical address and length for the
+ pin controller.
+diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
+index e68fd95..89ab7f5 100644
+--- a/drivers/pinctrl/sunxi/Kconfig
++++ b/drivers/pinctrl/sunxi/Kconfig
+@@ -51,6 +51,10 @@ config PINCTRL_SUN8I_A23_R
+ depends on RESET_CONTROLLER
+ select PINCTRL_SUNXI_COMMON
+
++config PINCTRL_SUN8I_H3
++ def_bool MACH_SUN8I
++ select PINCTRL_SUNXI_COMMON
++
+ config PINCTRL_SUN9I_A80
+ def_bool MACH_SUN9I
+ select PINCTRL_SUNXI_COMMON
+diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
+index e080290..6bd818e 100644
+--- a/drivers/pinctrl/sunxi/Makefile
++++ b/drivers/pinctrl/sunxi/Makefile
+@@ -13,4 +13,5 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o
+ obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
+ obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
+ obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o
++obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o
+ obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o
+diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
+new file mode 100644
+index 0000000..98d465d
+--- /dev/null
++++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
+@@ -0,0 +1,516 @@
++/*
++ * Allwinner H3 SoCs pinctrl driver.
++ *
++ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
++ *
++ * Based on pinctrl-sun8i-a23.c, which is:
++ * Copyright (C) 2014 Chen-Yu Tsai <wens@csie.org>
++ * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/pinctrl/pinctrl.h>
++
++#include "pinctrl-sunxi.h"
++
++static const struct sunxi_desc_pin sun8i_h3_pins[] = {
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart2"), /* TX */
++ SUNXI_FUNCTION(0x3, "jtag"), /* MS */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PA_EINT0 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 1),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart2"), /* RX */
++ SUNXI_FUNCTION(0x3, "jtag"), /* CK */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PA_EINT1 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 2),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart2"), /* RTS */
++ SUNXI_FUNCTION(0x3, "jtag"), /* DO */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PA_EINT2 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart2"), /* CTS */
++ SUNXI_FUNCTION(0x3, "jtag"), /* DI */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PA_EINT3 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 4),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart0"), /* TX */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PA_EINT4 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 5),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart0"), /* RX */
++ SUNXI_FUNCTION(0x3, "pwm0"),
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PA_EINT5 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 6),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "sim"), /* PWREN */
++ SUNXI_FUNCTION(0x3, "pwm1"),
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PA_EINT6 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 7),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "sim"), /* CLK */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PA_EINT7 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 8),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "sim"), /* DATA */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PA_EINT8 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 9),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "sim"), /* RST */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PA_EINT9 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 10),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "sim"), /* DET */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)), /* PA_EINT10 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 11),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */
++ SUNXI_FUNCTION(0x3, "di"), /* TX */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)), /* PA_EINT11 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 12),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2c0"), /* SDA */
++ SUNXI_FUNCTION(0x3, "di"), /* RX */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 12)), /* PA_EINT12 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 13),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "spi1"), /* CS */
++ SUNXI_FUNCTION(0x3, "uart3"), /* TX */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 13)), /* PA_EINT13 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 14),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "spi1"), /* CLK */
++ SUNXI_FUNCTION(0x3, "uart3"), /* RX */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), /* PA_EINT14 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 15),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "spi1"), /* MOSI */
++ SUNXI_FUNCTION(0x3, "uart3"), /* RTS */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)), /* PA_EINT15 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 16),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "spi1"), /* MISO */
++ SUNXI_FUNCTION(0x3, "uart3"), /* CTS */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)), /* PA_EINT16 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 17),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "spdif"), /* OUT */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 17)), /* PA_EINT17 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 18),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2s0"), /* SYNC */
++ SUNXI_FUNCTION(0x3, "i2c1"), /* SCK */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 18)), /* PA_EINT18 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 19),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2s0"), /* CLK */
++ SUNXI_FUNCTION(0x3, "i2c1"), /* SDA */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 19)), /* PA_EINT19 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 20),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2s0"), /* DOUT */
++ SUNXI_FUNCTION(0x3, "sim"), /* VPPEN */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 20)), /* PA_EINT20 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 21),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2s0"), /* DIN */
++ SUNXI_FUNCTION(0x3, "sim"), /* VPPPP */
++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 21)), /* PA_EINT21 */
++ /* Hole */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* WE */
++ SUNXI_FUNCTION(0x3, "spi0")), /* MOSI */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* ALE */
++ SUNXI_FUNCTION(0x3, "spi0")), /* MISO */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* CLE */
++ SUNXI_FUNCTION(0x3, "spi0")), /* CLK */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* CE1 */
++ SUNXI_FUNCTION(0x3, "spi0")), /* CS */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 4),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0")), /* CE0 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* RE */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* CLK */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* RB0 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* CMD */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 7),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0")), /* RB1 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 8),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* DQ0 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* D0 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 9),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* DQ1 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* D1 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 10),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* DQ2 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* D2 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 11),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* DQ3 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* D3 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* DQ4 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* D4 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand0"), /* DQ5 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* D5 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand"), /* DQ6 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* D6 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand"), /* DQ7 */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* D7 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "nand"), /* DQS */
++ SUNXI_FUNCTION(0x3, "mmc2")), /* RST */
++ /* Hole */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* RXD3 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 1),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* RXD2 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* RXD1 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 3),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* RXD0 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 4),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* RXCK */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 5),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* RXCTL/RCDV */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 6),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* RXERR */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 7),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* TXD3 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 8),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* TXD2L */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 9),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* TXD1 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 10),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* TXD0 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 11),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* CRS */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 12),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* TXCK */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 13),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* TXCTL/TXEN */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 14),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* TXERR */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* CLKIN/COL */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 16),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* MDC */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 17),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "emac")), /* MDIO */
++ /* Hole */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* PCLK */
++ SUNXI_FUNCTION(0x3, "ts")), /* CLK */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* MCLK */
++ SUNXI_FUNCTION(0x3, "ts")), /* ERR */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* HSYNC */
++ SUNXI_FUNCTION(0x3, "ts")), /* SYNC */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* VSYNC */
++ SUNXI_FUNCTION(0x3, "ts")), /* DVLD */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* D0 */
++ SUNXI_FUNCTION(0x3, "ts")), /* D0 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* D1 */
++ SUNXI_FUNCTION(0x3, "ts")), /* D1 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* D2 */
++ SUNXI_FUNCTION(0x3, "ts")), /* D2 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* D3 */
++ SUNXI_FUNCTION(0x3, "ts")), /* D3 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* D4 */
++ SUNXI_FUNCTION(0x3, "ts")), /* D4 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* D5 */
++ SUNXI_FUNCTION(0x3, "ts")), /* D5 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* D6 */
++ SUNXI_FUNCTION(0x3, "ts")), /* D6 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* D7 */
++ SUNXI_FUNCTION(0x3, "ts")), /* D7 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* SCK */
++ SUNXI_FUNCTION(0x3, "i2c2")), /* SCK */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 13),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "csi"), /* SDA */
++ SUNXI_FUNCTION(0x3, "i2c2")), /* SDA */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 14),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out")),
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 15),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out")),
++ /* Hole */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc0"), /* D1 */
++ SUNXI_FUNCTION(0x3, "jtag")), /* MS */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc0"), /* D0 */
++ SUNXI_FUNCTION(0x3, "jtag")), /* DI */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc0"), /* CLK */
++ SUNXI_FUNCTION(0x3, "uart0")), /* TX */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc0"), /* CMD */
++ SUNXI_FUNCTION(0x3, "jtag")), /* DO */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc0"), /* D3 */
++ SUNXI_FUNCTION(0x3, "uart0")), /* RX */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc0"), /* D2 */
++ SUNXI_FUNCTION(0x3, "jtag")), /* CK */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 6),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc0")), /* DET */
++ /* Hole */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc1"), /* CLK */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 0)), /* PG_EINT0 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 1),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc1"), /* CMD */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 1)), /* PG_EINT1 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 2),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc1"), /* D0 */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 2)), /* PG_EINT2 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 3),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc1"), /* D1 */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 3)), /* PG_EINT3 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 4),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc1"), /* D2 */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 4)), /* PG_EINT4 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 5),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "mmc1"), /* D3 */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 5)), /* PG_EINT5 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 6),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart1"), /* TX */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 6)), /* PG_EINT6 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 7),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart1"), /* RX */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 7)), /* PG_EINT7 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart1"), /* RTS */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 8)), /* PG_EINT8 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "uart1"), /* CTS */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 9)), /* PG_EINT9 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2s1"), /* SYNC */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 10)), /* PG_EINT10 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2s1"), /* CLK */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 11)), /* PG_EINT11 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 12),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2s1"), /* DOUT */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 12)), /* PG_EINT12 */
++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 13),
++ SUNXI_FUNCTION(0x0, "gpio_in"),
++ SUNXI_FUNCTION(0x1, "gpio_out"),
++ SUNXI_FUNCTION(0x2, "i2s1"), /* DIN */
++ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 13)), /* PG_EINT13 */
++};
++
++static const struct sunxi_pinctrl_desc sun8i_h3_pinctrl_data = {
++ .pins = sun8i_h3_pins,
++ .npins = ARRAY_SIZE(sun8i_h3_pins),
++ .irq_banks = 2,
++};
++
++static int sun8i_h3_pinctrl_probe(struct platform_device *pdev)
++{
++ return sunxi_pinctrl_init(pdev,
++ &sun8i_h3_pinctrl_data);
++}
++
++static const struct of_device_id sun8i_h3_pinctrl_match[] = {
++ { .compatible = "allwinner,sun8i-h3-pinctrl", },
++ {}
++};
++
++static struct platform_driver sun8i_h3_pinctrl_driver = {
++ .probe = sun8i_h3_pinctrl_probe,
++ .driver = {
++ .name = "sun8i-h3-pinctrl",
++ .of_match_table = sun8i_h3_pinctrl_match,
++ },
++};
++builtin_platform_driver(sun8i_h3_pinctrl_driver);
diff --git a/target/linux/sunxi/patches-4.4/131-reset-add-h3-resets.patch b/target/linux/sunxi/patches-4.4/131-reset-add-h3-resets.patch
new file mode 100644
index 0000000..a07cbe5
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/131-reset-add-h3-resets.patch
@@ -0,0 +1,95 @@
+From 5f0bb9d0bc545ef53a83f7bd176fdc0736eed8e5 Mon Sep 17 00:00:00 2001
+From: Jens Kuske <jenskuske@gmail.com>
+Date: Tue, 27 Oct 2015 17:50:24 +0100
+Subject: [PATCH] reset: sunxi: Add Allwinner H3 bus resets
+
+The H3 bus resets have some holes between the registers, so we add
+an of_xlate() function to skip them according to the datasheet.
+
+Signed-off-by: Jens Kuske <jenskuske@gmail.com>
+---
+ .../bindings/reset/allwinner,sunxi-clock-reset.txt | 1 +
+ drivers/reset/reset-sunxi.c | 30 +++++++++++++++++++---
+ 2 files changed, 28 insertions(+), 3 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
+index c8f77571..e11f023 100644
+--- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
++++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
+@@ -8,6 +8,7 @@ Required properties:
+ - compatible: Should be one of the following:
+ "allwinner,sun6i-a31-ahb1-reset"
+ "allwinner,sun6i-a31-clock-reset"
++ "allwinner,sun8i-h3-bus-reset"
+ - reg: should be register base and length as documented in the
+ datasheet
+ - #reset-cells: 1, see below
+diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
+index 3d95c87..c91e146 100644
+--- a/drivers/reset/reset-sunxi.c
++++ b/drivers/reset/reset-sunxi.c
+@@ -75,7 +75,9 @@ static struct reset_control_ops sunxi_reset_ops = {
+ .deassert = sunxi_reset_deassert,
+ };
+
+-static int sunxi_reset_init(struct device_node *np)
++static int sunxi_reset_init(struct device_node *np,
++ int (*of_xlate)(struct reset_controller_dev *rcdev,
++ const struct of_phandle_args *reset_spec))
+ {
+ struct sunxi_reset_data *data;
+ struct resource res;
+@@ -108,6 +110,7 @@ static int sunxi_reset_init(struct device_node *np)
+ data->rcdev.nr_resets = size * 32;
+ data->rcdev.ops = &sunxi_reset_ops;
+ data->rcdev.of_node = np;
++ data->rcdev.of_xlate = of_xlate;
+ reset_controller_register(&data->rcdev);
+
+ return 0;
+@@ -117,6 +120,21 @@ static int sunxi_reset_init(struct device_node *np)
+ return ret;
+ };
+
++static int sun8i_h3_bus_reset_xlate(struct reset_controller_dev *rcdev,
++ const struct of_phandle_args *reset_spec)
++{
++ unsigned int index = reset_spec->args[0];
++
++ if (index < 96)
++ return index;
++ else if (index < 128)
++ return index + 32;
++ else if (index < 160)
++ return index + 64;
++ else
++ return -EINVAL;
++}
++
+ /*
+ * These are the reset controller we need to initialize early on in
+ * our system, before we can even think of using a regular device
+@@ -124,15 +142,21 @@ static int sunxi_reset_init(struct device_node *np)
+ */
+ static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = {
+ { .compatible = "allwinner,sun6i-a31-ahb1-reset", },
++ { .compatible = "allwinner,sun8i-h3-bus-reset", .data = sun8i_h3_bus_reset_xlate, },
+ { /* sentinel */ },
+ };
+
+ void __init sun6i_reset_init(void)
+ {
+ struct device_node *np;
++ const struct of_device_id *match;
++ int (*of_xlate)(struct reset_controller_dev *rcdev,
++ const struct of_phandle_args *reset_spec);
+
+- for_each_matching_node(np, sunxi_early_reset_dt_ids)
+- sunxi_reset_init(np);
++ for_each_matching_node_and_match(np, sunxi_early_reset_dt_ids, &match) {
++ of_xlate = match->data;
++ sunxi_reset_init(np, of_xlate);
++ }
+ }
+
+ /*
diff --git a/target/linux/sunxi/patches-4.4/132-dt-sun8i-add-h3-usbclocks.patch b/target/linux/sunxi/patches-4.4/132-dt-sun8i-add-h3-usbclocks.patch
new file mode 100644
index 0000000..a38d341
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/132-dt-sun8i-add-h3-usbclocks.patch
@@ -0,0 +1,36 @@
+From d6a71e3caae07fb2d98e93ee62477273abaceb27 Mon Sep 17 00:00:00 2001
+From: Reinder de Haan <patchesrdh@mveas.com>
+Date: Tue, 3 Nov 2015 15:13:00 +0100
+Subject: [PATCH] ARM: dts: sun8i: Add support for H3 usb clocks
+
+Add a node describing the usb-clks found on the H3.
+
+Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
+index 1524130e..cbab947 100644
+--- a/arch/arm/boot/dts/sun8i-h3.dtsi
++++ b/arch/arm/boot/dts/sun8i-h3.dtsi
+@@ -269,6 +269,18 @@
+ "mmc2_sample";
+ };
+
++ usb_clk: clk@01c200cc {
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ compatible = "allwinner,sun8i-h3-usb-clk";
++ reg = <0x01c200cc 0x4>;
++ clocks = <&osc24M>;
++ clock-output-names = "usb_phy0", "usb_phy1",
++ "usb_phy2", "usb_phy3",
++ "usb_ohci0", "usb_ohci1",
++ "usb_ohci2", "usb_ohci3";
++ };
++
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-mbus-clk";
diff --git a/target/linux/sunxi/patches-4.4/133-dt-sun8i-add-usbphy-usbhost-ctrl-nodes.patch b/target/linux/sunxi/patches-4.4/133-dt-sun8i-add-usbphy-usbhost-ctrl-nodes.patch
new file mode 100644
index 0000000..6910834
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/133-dt-sun8i-add-usbphy-usbhost-ctrl-nodes.patch
@@ -0,0 +1,125 @@
+From 5971a2f283d21eab36d7de24d35301f081f83418 Mon Sep 17 00:00:00 2001
+From: Reinder de Haan <patchesrdh@mveas.com>
+Date: Tue, 3 Nov 2015 15:14:20 +0100
+Subject: [PATCH] ARM: dts: sun8i: Add usbphy and usb host controller nodes
+
+Add nodes describing the H3's usbphy and usb host controller nodes.
+
+Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/sun8i-h3.dtsi | 101 ++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 101 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
+index cbab947..1169f515 100644
+--- a/arch/arm/boot/dts/sun8i-h3.dtsi
++++ b/arch/arm/boot/dts/sun8i-h3.dtsi
+@@ -362,6 +362,107 @@
+ #size-cells = <0>;
+ };
+
++ usbphy: phy@01c19400 {
++ compatible = "allwinner,sun8i-h3-usb-phy";
++ reg = <0x01c19400 0x2c>,
++ <0x01c1a800 0x4>,
++ <0x01c1b800 0x4>,
++ <0x01c1c800 0x4>,
++ <0x01c1d800 0x4>;
++ reg-names = "phy_ctrl",
++ "pmu0",
++ "pmu1",
++ "pmu2",
++ "pmu3";
++ clocks = <&usb_clk 8>,
++ <&usb_clk 9>,
++ <&usb_clk 10>,
++ <&usb_clk 11>;
++ clock-names = "usb0_phy",
++ "usb1_phy",
++ "usb2_phy",
++ "usb3_phy";
++ resets = <&usb_clk 0>,
++ <&usb_clk 1>,
++ <&usb_clk 2>,
++ <&usb_clk 3>;
++ reset-names = "usb0_reset",
++ "usb1_reset",
++ "usb2_reset",
++ "usb3_reset";
++ status = "disabled";
++ #phy-cells = <1>;
++ };
++
++ ehci1: usb@01c1b000 {
++ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
++ reg = <0x01c1b000 0x100>;
++ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&bus_gates 25>, <&bus_gates 29>;
++ resets = <&ahb_rst 25>, <&ahb_rst 29>;
++ phys = <&usbphy 1>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci1: usb@01c1b400 {
++ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
++ reg = <0x01c1b400 0x100>;
++ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&bus_gates 29>, <&bus_gates 25>,
++ <&usb_clk 17>;
++ resets = <&ahb_rst 29>, <&ahb_rst 25>;
++ phys = <&usbphy 1>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ehci2: usb@01c1c000 {
++ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
++ reg = <0x01c1c000 0x100>;
++ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&bus_gates 26>, <&bus_gates 30>;
++ resets = <&ahb_rst 26>, <&ahb_rst 30>;
++ phys = <&usbphy 2>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci2: usb@01c1c400 {
++ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
++ reg = <0x01c1c400 0x100>;
++ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&bus_gates 30>, <&bus_gates 26>,
++ <&usb_clk 18>;
++ resets = <&ahb_rst 30>, <&ahb_rst 26>;
++ phys = <&usbphy 2>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ehci3: usb@01c1d000 {
++ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
++ reg = <0x01c1d000 0x100>;
++ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&bus_gates 27>, <&bus_gates 31>;
++ resets = <&ahb_rst 27>, <&ahb_rst 31>;
++ phys = <&usbphy 3>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci3: usb@01c1d400 {
++ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
++ reg = <0x01c1d400 0x100>;
++ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&bus_gates 31>, <&bus_gates 27>,
++ <&usb_clk 19>;
++ resets = <&ahb_rst 31>, <&ahb_rst 27>;
++ phys = <&usbphy 3>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun8i-h3-pinctrl";
+ reg = <0x01c20800 0x400>;
diff --git a/target/linux/sunxi/patches-4.4/134-dt-sun8i-orangepiplus-enable-usbhost.patch b/target/linux/sunxi/patches-4.4/134-dt-sun8i-orangepiplus-enable-usbhost.patch
new file mode 100644
index 0000000..403e185
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/134-dt-sun8i-orangepiplus-enable-usbhost.patch
@@ -0,0 +1,79 @@
+From 37e04fd781d3fc6d08116d38d34ec8124d916441 Mon Sep 17 00:00:00 2001
+From: Jens Kuske <jenskuske@gmail.com>
+Date: Tue, 17 Nov 2015 17:12:07 +0100
+Subject: [PATCH] ARM: dts: sun8i-h3-orangepi-plus: Enable USB host controllers
+
+Enable the 2 USB host controllers used on the Orange Pi Plus
+and add the necessary regulators.
+
+Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Jens Kuske <jenskuske@gmail.com>
+---
+ arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 44 ++++++++++++++++++++++++++++
+ 1 file changed, 44 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+index e67df59..1cb6c66 100644
+--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
++++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+@@ -58,6 +58,35 @@
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ reg_usb3_vbus: usb3-vbus {
++ compatible = "regulator-fixed";
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb3_vbus_pin_a>;
++ regulator-name = "usb3-vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
++ };
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&ehci3 {
++ status = "okay";
++};
++
++&pio {
++ usb3_vbus_pin_a: usb3_vbus_pin@0 {
++ allwinner,pins = "PG11";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
+ };
+
+ &mmc0 {
+@@ -70,8 +99,23 @@
+ status = "okay";
+ };
+
++&reg_usb1_vbus {
++ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
++
++&usb1_vbus_pin_a {
++ allwinner,pins = "PG13";
++};
++
++&usbphy {
++ usb1_vbus-supply = <&reg_usb1_vbus>;
++ usb3_vbus-supply = <&reg_usb3_vbus>;
++ status = "okay";
++};
diff --git a/target/linux/sunxi/patches-4.4/135-clk-sunxi-fix-signedness-bug.patch b/target/linux/sunxi/patches-4.4/135-clk-sunxi-fix-signedness-bug.patch
new file mode 100644
index 0000000..c90bbb5
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/135-clk-sunxi-fix-signedness-bug.patch
@@ -0,0 +1,27 @@
+From b1558f168f4ef5956913d73fe330c4da85c74349 Mon Sep 17 00:00:00 2001
+From: Dan Carpenter <dan.carpenter@oracle.com>
+Date: Sat, 12 Dec 2015 15:43:46 +0300
+Subject: [PATCH] clk: sunxi: signedness bug in sun8i_h3_bus_gates_init()
+
+"index" needs to be signed for the error handling to work.
+
+Fixes: ab6e23a4e388 ('clk: sunxi: Add H3 clocks support')
+Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ drivers/clk/sunxi/clk-sun8i-bus-gates.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/clk/sunxi/clk-sun8i-bus-gates.c b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
+index 7ab60c5..b8c7753 100644
+--- a/drivers/clk/sunxi/clk-sun8i-bus-gates.c
++++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
+@@ -40,7 +40,7 @@ static void __init sun8i_h3_bus_gates_init(struct device_node *node)
+ const __be32 *p;
+ int number, i;
+ u8 clk_bit;
+- u32 index;
++ int index;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg))
diff --git a/target/linux/sunxi/patches-4.4/140-reset-add-of_reset_control_get_by_index.patch b/target/linux/sunxi/patches-4.4/140-reset-add-of_reset_control_get_by_index.patch
new file mode 100644
index 0000000..1a48d7c
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/140-reset-add-of_reset_control_get_by_index.patch
@@ -0,0 +1,113 @@
+From b4faa163a7ebae9faab5d0aefe70143e3379178b Mon Sep 17 00:00:00 2001
+From: Vince Hsu <vinceh@nvidia.com>
+Date: Mon, 13 Jul 2015 13:39:39 +0100
+Subject: [PATCH] reset: add of_reset_control_get_by_index()
+
+Add of_reset_control_get_by_index() to allow the drivers to get reset
+device without knowing its name.
+
+Signed-off-by: Vince Hsu <vinceh@nvidia.com>
+[jonathanh@nvidia.com: Updated stub function to return -ENOTSUPP instead
+ of -ENOSYS which should only be used for system calls.]
+Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
+Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
+---
+ drivers/reset/core.c | 40 +++++++++++++++++++++++++++++-----------
+ include/linux/reset.h | 9 +++++++++
+ 2 files changed, 38 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/reset/core.c b/drivers/reset/core.c
+index 7955e00..81ae17d 100644
+--- a/drivers/reset/core.c
++++ b/drivers/reset/core.c
+@@ -141,27 +141,24 @@ int reset_control_status(struct reset_control *rstc)
+ EXPORT_SYMBOL_GPL(reset_control_status);
+
+ /**
+- * of_reset_control_get - Lookup and obtain a reference to a reset controller.
++ * of_reset_control_get_by_index - Lookup and obtain a reference to a reset
++ * controller by index.
+ * @node: device to be reset by the controller
+- * @id: reset line name
+- *
+- * Returns a struct reset_control or IS_ERR() condition containing errno.
++ * @index: index of the reset controller
+ *
+- * Use of id names is optional.
++ * This is to be used to perform a list of resets for a device or power domain
++ * in whatever order. Returns a struct reset_control or IS_ERR() condition
++ * containing errno.
+ */
+-struct reset_control *of_reset_control_get(struct device_node *node,
+- const char *id)
++struct reset_control *of_reset_control_get_by_index(struct device_node *node,
++ int index)
+ {
+ struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
+ struct reset_controller_dev *r, *rcdev;
+ struct of_phandle_args args;
+- int index = 0;
+ int rstc_id;
+ int ret;
+
+- if (id)
+- index = of_property_match_string(node,
+- "reset-names", id);
+ ret = of_parse_phandle_with_args(node, "resets", "#reset-cells",
+ index, &args);
+ if (ret)
+@@ -202,6 +199,27 @@ struct reset_control *of_reset_control_get(struct device_node *node,
+
+ return rstc;
+ }
++EXPORT_SYMBOL_GPL(of_reset_control_get_by_index);
++
++/**
++ * of_reset_control_get - Lookup and obtain a reference to a reset controller.
++ * @node: device to be reset by the controller
++ * @id: reset line name
++ *
++ * Returns a struct reset_control or IS_ERR() condition containing errno.
++ *
++ * Use of id names is optional.
++ */
++struct reset_control *of_reset_control_get(struct device_node *node,
++ const char *id)
++{
++ int index = 0;
++
++ if (id)
++ index = of_property_match_string(node,
++ "reset-names", id);
++ return of_reset_control_get_by_index(node, index);
++}
+ EXPORT_SYMBOL_GPL(of_reset_control_get);
+
+ /**
+diff --git a/include/linux/reset.h b/include/linux/reset.h
+index 7f65f9c..6db74ad 100644
+--- a/include/linux/reset.h
++++ b/include/linux/reset.h
+@@ -38,6 +38,9 @@ static inline struct reset_control *devm_reset_control_get_optional(
+ struct reset_control *of_reset_control_get(struct device_node *node,
+ const char *id);
+
++struct reset_control *of_reset_control_get_by_index(
++ struct device_node *node, int index);
++
+ #else
+
+ static inline int reset_control_reset(struct reset_control *rstc)
+@@ -106,6 +109,12 @@ static inline struct reset_control *of_reset_control_get(
+ return ERR_PTR(-ENOSYS);
+ }
+
++static inline struct reset_control *of_reset_control_get_by_index(
++ struct device_node *node, int index)
++{
++ return ERR_PTR(-ENOTSUPP);
++}
++
+ #endif /* CONFIG_RESET_CONTROLLER */
+
+ #endif
diff --git a/target/linux/sunxi/patches-4.4/141-reset-fix-of_reset_control_get.patch b/target/linux/sunxi/patches-4.4/141-reset-fix-of_reset_control_get.patch
new file mode 100644
index 0000000..62891b4
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/141-reset-fix-of_reset_control_get.patch
@@ -0,0 +1,41 @@
+From 7fd7a26b60090a7df15f30ba10b0d39cbbd6a94e Mon Sep 17 00:00:00 2001
+From: Alban Bedel <albeu@free.fr>
+Date: Tue, 1 Sep 2015 17:28:31 +0200
+Subject: [PATCH] reset: Fix of_reset_control_get() for consistent return
+ values
+
+When of_reset_control_get() is called without connection ID it returns
+-ENOENT when the 'resets' property doesn't exists or is an empty entry.
+However when a connection ID is given it returns -EINVAL when the 'resets'
+property doesn't exists or the requested name can't be found. This is
+because the error code returned by of_property_match_string() is just
+passed down as an index to of_parse_phandle_with_args(), which then
+returns -EINVAL.
+
+To get a consistent return value with both code paths we must return
+-ENOENT when of_property_match_string() fails.
+
+Signed-off-by: Alban Bedel <albeu@free.fr>
+Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
+---
+ drivers/reset/core.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/reset/core.c b/drivers/reset/core.c
+index 81ae17d..77cfc49 100644
+--- a/drivers/reset/core.c
++++ b/drivers/reset/core.c
+@@ -215,9 +215,12 @@ struct reset_control *of_reset_control_get(struct device_node *node,
+ {
+ int index = 0;
+
+- if (id)
++ if (id) {
+ index = of_property_match_string(node,
+ "reset-names", id);
++ if (index < 0)
++ return ERR_PTR(-ENOENT);
++ }
+ return of_reset_control_get_by_index(node, index);
+ }
+ EXPORT_SYMBOL_GPL(of_reset_control_get);
diff --git a/target/linux/sunxi/patches-4.4/142-reset-use-ENOTSUPP-instead-of-ENOSYS.patch b/target/linux/sunxi/patches-4.4/142-reset-use-ENOTSUPP-instead-of-ENOSYS.patch
new file mode 100644
index 0000000..a80eed4
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/142-reset-use-ENOTSUPP-instead-of-ENOSYS.patch
@@ -0,0 +1,91 @@
+From 5a819175b911ce33f3337e1e069d4bcea1ec4788 Mon Sep 17 00:00:00 2001
+From: Philipp Zabel <p.zabel@pengutronix.de>
+Date: Thu, 29 Oct 2015 09:55:00 +0100
+Subject: [PATCH] reset: use ENOTSUPP instead of ENOSYS
+
+ENOSYS is reserved to report invalid syscalls to userspace.
+Consistently return ENOTSUPP to indicate that the driver doesn't support
+the functionality or the reset framework is not enabled at all.
+
+Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
+---
+ drivers/reset/core.c | 8 ++++----
+ include/linux/reset.h | 8 ++++----
+ 2 files changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/reset/core.c b/drivers/reset/core.c
+index 77cfc49..9ab9290 100644
+--- a/drivers/reset/core.c
++++ b/drivers/reset/core.c
+@@ -95,7 +95,7 @@ int reset_control_reset(struct reset_control *rstc)
+ if (rstc->rcdev->ops->reset)
+ return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
+
+- return -ENOSYS;
++ return -ENOTSUPP;
+ }
+ EXPORT_SYMBOL_GPL(reset_control_reset);
+
+@@ -108,7 +108,7 @@ int reset_control_assert(struct reset_control *rstc)
+ if (rstc->rcdev->ops->assert)
+ return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
+
+- return -ENOSYS;
++ return -ENOTSUPP;
+ }
+ EXPORT_SYMBOL_GPL(reset_control_assert);
+
+@@ -121,7 +121,7 @@ int reset_control_deassert(struct reset_control *rstc)
+ if (rstc->rcdev->ops->deassert)
+ return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
+
+- return -ENOSYS;
++ return -ENOTSUPP;
+ }
+ EXPORT_SYMBOL_GPL(reset_control_deassert);
+
+@@ -136,7 +136,7 @@ int reset_control_status(struct reset_control *rstc)
+ if (rstc->rcdev->ops->status)
+ return rstc->rcdev->ops->status(rstc->rcdev, rstc->id);
+
+- return -ENOSYS;
++ return -ENOTSUPP;
+ }
+ EXPORT_SYMBOL_GPL(reset_control_status);
+
+diff --git a/include/linux/reset.h b/include/linux/reset.h
+index 6db74ad..c4c097d 100644
+--- a/include/linux/reset.h
++++ b/include/linux/reset.h
+@@ -74,7 +74,7 @@ static inline void reset_control_put(struct reset_control *rstc)
+
+ static inline int device_reset_optional(struct device *dev)
+ {
+- return -ENOSYS;
++ return -ENOTSUPP;
+ }
+
+ static inline struct reset_control *__must_check reset_control_get(
+@@ -94,19 +94,19 @@ static inline struct reset_control *__must_check devm_reset_control_get(
+ static inline struct reset_control *reset_control_get_optional(
+ struct device *dev, const char *id)
+ {
+- return ERR_PTR(-ENOSYS);
++ return ERR_PTR(-ENOTSUPP);
+ }
+
+ static inline struct reset_control *devm_reset_control_get_optional(
+ struct device *dev, const char *id)
+ {
+- return ERR_PTR(-ENOSYS);
++ return ERR_PTR(-ENOTSUPP);
+ }
+
+ static inline struct reset_control *of_reset_control_get(
+ struct device_node *node, const char *id)
+ {
+- return ERR_PTR(-ENOSYS);
++ return ERR_PTR(-ENOTSUPP);
+ }
+
+ static inline struct reset_control *of_reset_control_get_by_index(
diff --git a/target/linux/sunxi/patches-4.4/143-reset-add-shared-resetcontrol-asserts.patch b/target/linux/sunxi/patches-4.4/143-reset-add-shared-resetcontrol-asserts.patch
new file mode 100644
index 0000000..3e962d9
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/143-reset-add-shared-resetcontrol-asserts.patch
@@ -0,0 +1,271 @@
+From d25cfe9b4f9663216ce4e011e3f1e7fa669ab58a Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Fri, 27 Nov 2015 21:09:05 +0100
+Subject: [PATCH] reset: Add shared reset_control_[de]assert variants
+
+Add reset_control_deassert_shared / reset_control_assert_shared
+functions which are intended for use by drivers for hw blocks which
+(may) share a reset line with another driver / hw block.
+
+Unlike the regular reset_control_[de]assert functions these functions
+keep track of how often deassert_shared / assert_shared have been called
+and keep the line deasserted as long as deassert has been called more
+times than assert.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+Changes in v2:
+-This is a new patch in v2 of this patch-set
+---
+ drivers/reset/core.c | 121 ++++++++++++++++++++++++++++++++++++---
+ include/linux/reset-controller.h | 2 +
+ include/linux/reset.h | 2 +
+ 3 files changed, 116 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/reset/core.c b/drivers/reset/core.c
+index 9ab9290..8c3436c 100644
+--- a/drivers/reset/core.c
++++ b/drivers/reset/core.c
+@@ -22,16 +22,29 @@ static DEFINE_MUTEX(reset_controller_list_mutex);
+ static LIST_HEAD(reset_controller_list);
+
+ /**
++ * struct reset_line - a reset line
++ * @list: list entry for the reset controllers reset line list
++ * @id: ID of the reset line in the reset controller device
++ * @refcnt: Number of reset_control structs referencing this device
++ * @deassert_cnt: Number of times this reset line has been deasserted
++ */
++struct reset_line {
++ struct list_head list;
++ unsigned int id;
++ unsigned int refcnt;
++ unsigned int deassert_cnt;
++};
++
++/**
+ * struct reset_control - a reset control
+ * @rcdev: a pointer to the reset controller device
+ * this reset control belongs to
+- * @id: ID of the reset controller in the reset
+- * controller device
++ * @line: reset line for this reset control
+ */
+ struct reset_control {
+ struct reset_controller_dev *rcdev;
++ struct reset_line *line;
+ struct device *dev;
+- unsigned int id;
+ };
+
+ /**
+@@ -66,6 +79,8 @@ int reset_controller_register(struct reset_controller_dev *rcdev)
+ rcdev->of_xlate = of_reset_simple_xlate;
+ }
+
++ INIT_LIST_HEAD(&rcdev->reset_line_head);
++
+ mutex_lock(&reset_controller_list_mutex);
+ list_add(&rcdev->list, &reset_controller_list);
+ mutex_unlock(&reset_controller_list_mutex);
+@@ -93,7 +108,7 @@ EXPORT_SYMBOL_GPL(reset_controller_unregister);
+ int reset_control_reset(struct reset_control *rstc)
+ {
+ if (rstc->rcdev->ops->reset)
+- return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
++ return rstc->rcdev->ops->reset(rstc->rcdev, rstc->line->id);
+
+ return -ENOTSUPP;
+ }
+@@ -106,7 +121,7 @@ EXPORT_SYMBOL_GPL(reset_control_reset);
+ int reset_control_assert(struct reset_control *rstc)
+ {
+ if (rstc->rcdev->ops->assert)
+- return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
++ return rstc->rcdev->ops->assert(rstc->rcdev, rstc->line->id);
+
+ return -ENOTSUPP;
+ }
+@@ -119,13 +134,55 @@ EXPORT_SYMBOL_GPL(reset_control_assert);
+ int reset_control_deassert(struct reset_control *rstc)
+ {
+ if (rstc->rcdev->ops->deassert)
+- return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
++ return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->line->id);
+
+ return -ENOTSUPP;
+ }
+ EXPORT_SYMBOL_GPL(reset_control_deassert);
+
+ /**
++ * reset_control_assert_shared - asserts a shared reset line
++ * @rstc: reset controller
++ *
++ * Assert a shared reset line, this functions decreases the deassert count
++ * of the line by one and asserts it if, and only if, the deassert count
++ * reaches 0.
++ */
++int reset_control_assert_shared(struct reset_control *rstc)
++{
++ if (!rstc->rcdev->ops->assert)
++ return -ENOTSUPP;
++
++ rstc->line->deassert_cnt--;
++ if (rstc->line->deassert_cnt)
++ return 0;
++
++ return rstc->rcdev->ops->assert(rstc->rcdev, rstc->line->id);
++}
++EXPORT_SYMBOL_GPL(reset_control_assert_shared);
++
++/**
++ * reset_control_deassert_shared - deasserts a shared reset line
++ * @rstc: reset controller
++ *
++ * Assert a shared reset line, this functions increases the deassert count
++ * of the line by one and deasserts the reset line (if it was not already
++ * deasserted).
++ */
++int reset_control_deassert_shared(struct reset_control *rstc)
++{
++ if (!rstc->rcdev->ops->deassert)
++ return -ENOTSUPP;
++
++ rstc->line->deassert_cnt++;
++ if (rstc->line->deassert_cnt != 1)
++ return 0;
++
++ return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->line->id);
++}
++EXPORT_SYMBOL_GPL(reset_control_deassert_shared);
++
++/**
+ * reset_control_status - returns a negative errno if not supported, a
+ * positive value if the reset line is asserted, or zero if the reset
+ * line is not asserted.
+@@ -134,12 +191,47 @@ EXPORT_SYMBOL_GPL(reset_control_deassert);
+ int reset_control_status(struct reset_control *rstc)
+ {
+ if (rstc->rcdev->ops->status)
+- return rstc->rcdev->ops->status(rstc->rcdev, rstc->id);
++ return rstc->rcdev->ops->status(rstc->rcdev, rstc->line->id);
+
+ return -ENOTSUPP;
+ }
+ EXPORT_SYMBOL_GPL(reset_control_status);
+
++static struct reset_line *reset_line_get(struct reset_controller_dev *rcdev,
++ unsigned int index)
++{
++ struct reset_line *line;
++
++ list_for_each_entry(line, &rcdev->reset_line_head, list) {
++ if (line->id == index) {
++ line->refcnt++;
++ return line;
++ }
++ }
++
++ line = kzalloc(sizeof(*line), GFP_KERNEL);
++ if (!line)
++ return NULL;
++
++ list_add(&line->list, &rcdev->reset_line_head);
++ line->id = index;
++ line->refcnt = 1;
++
++ return line;
++}
++
++static void reset_line_put(struct reset_line *line)
++{
++ if (!line)
++ return;
++
++ if (--line->refcnt)
++ return;
++
++ list_del(&line->list);
++ kfree(line);
++}
++
+ /**
+ * of_reset_control_get_by_index - Lookup and obtain a reference to a reset
+ * controller by index.
+@@ -155,6 +247,7 @@ struct reset_control *of_reset_control_get_by_index(struct device_node *node,
+ {
+ struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
+ struct reset_controller_dev *r, *rcdev;
++ struct reset_line *line;
+ struct of_phandle_args args;
+ int rstc_id;
+ int ret;
+@@ -186,16 +279,22 @@ struct reset_control *of_reset_control_get_by_index(struct device_node *node,
+ }
+
+ try_module_get(rcdev->owner);
++
++ /* reset_controller_list_mutex also protects the reset_line list */
++ line = reset_line_get(rcdev, rstc_id);
++
+ mutex_unlock(&reset_controller_list_mutex);
+
+ rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
+- if (!rstc) {
++ if (!line || !rstc) {
++ kfree(rstc);
++ reset_line_put(line);
+ module_put(rcdev->owner);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ rstc->rcdev = rcdev;
+- rstc->id = rstc_id;
++ rstc->line = line;
+
+ return rstc;
+ }
+@@ -259,6 +358,10 @@ void reset_control_put(struct reset_control *rstc)
+ if (IS_ERR(rstc))
+ return;
+
++ mutex_lock(&reset_controller_list_mutex);
++ reset_line_put(rstc->line);
++ mutex_unlock(&reset_controller_list_mutex);
++
+ module_put(rstc->rcdev->owner);
+ kfree(rstc);
+ }
+diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
+index ce6b962..7f2cbd1 100644
+--- a/include/linux/reset-controller.h
++++ b/include/linux/reset-controller.h
+@@ -31,6 +31,7 @@ struct of_phandle_args;
+ * @ops: a pointer to device specific struct reset_control_ops
+ * @owner: kernel module of the reset controller driver
+ * @list: internal list of reset controller devices
++ * @reset_line_head: head of internal list of reset lines
+ * @of_node: corresponding device tree node as phandle target
+ * @of_reset_n_cells: number of cells in reset line specifiers
+ * @of_xlate: translation function to translate from specifier as found in the
+@@ -41,6 +42,7 @@ struct reset_controller_dev {
+ struct reset_control_ops *ops;
+ struct module *owner;
+ struct list_head list;
++ struct list_head reset_line_head;
+ struct device_node *of_node;
+ int of_reset_n_cells;
+ int (*of_xlate)(struct reset_controller_dev *rcdev,
+diff --git a/include/linux/reset.h b/include/linux/reset.h
+index c4c097d..1cca8ce 100644
+--- a/include/linux/reset.h
++++ b/include/linux/reset.h
+@@ -11,6 +11,8 @@ int reset_control_reset(struct reset_control *rstc);
+ int reset_control_assert(struct reset_control *rstc);
+ int reset_control_deassert(struct reset_control *rstc);
+ int reset_control_status(struct reset_control *rstc);
++int reset_control_assert_shared(struct reset_control *rstc);
++int reset_control_deassert_shared(struct reset_control *rstc);
+
+ struct reset_control *reset_control_get(struct device *dev, const char *id);
+ void reset_control_put(struct reset_control *rstc);
diff --git a/target/linux/sunxi/patches-4.4/144-usb-ehci-plat-support-multiple-reset-ctrllines.patch b/target/linux/sunxi/patches-4.4/144-usb-ehci-plat-support-multiple-reset-ctrllines.patch
new file mode 100644
index 0000000..faafa1f
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/144-usb-ehci-plat-support-multiple-reset-ctrllines.patch
@@ -0,0 +1,131 @@
+From 957e8f96c67052ca843ea9ffc5223662b973e5de Mon Sep 17 00:00:00 2001
+From: Reinder de Haan <patchesrdh@mveas.com>
+Date: Sun, 15 Nov 2015 14:24:46 +0100
+Subject: [PATCH] ehci-platform: Add support for controllers with multiple
+ reset lines
+
+At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
+reset lines, the controller will not initialize while the reset for
+its companion is still asserted, which means we need to de-assert
+2 resets for the controller to work.
+
+Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+Changes in v2:
+-Use the new reset_control_[de]assert_shared reset-controller functions
+---
+ Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 +-
+ drivers/usb/host/ehci-platform.c | 47 +++++++++++++---------
+ 2 files changed, 30 insertions(+), 19 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
+index a12d601..0701812 100644
+--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
++++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
+@@ -18,7 +18,7 @@ Optional properties:
+ - clocks : a list of phandle + clock specifier pairs
+ - phys : phandle + phy specifier pair
+ - phy-names : "usb"
+- - resets : phandle + reset specifier pair
++ - resets : a list of phandle + reset specifier pairs
+
+ Example (Sequoia 440EPx):
+ ehci@e0000300 {
+diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
+index bd7082f2..6fbf32a 100644
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -39,11 +39,12 @@
+
+ #define DRIVER_DESC "EHCI generic platform driver"
+ #define EHCI_MAX_CLKS 3
++#define EHCI_MAX_RESETS 2
+ #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
+
+ struct ehci_platform_priv {
+ struct clk *clks[EHCI_MAX_CLKS];
+- struct reset_control *rst;
++ struct reset_control *resets[EHCI_MAX_RESETS];
+ struct phy **phys;
+ int num_phys;
+ bool reset_on_resume;
+@@ -149,7 +150,7 @@ static int ehci_platform_probe(struct platform_device *dev)
+ struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+ struct ehci_platform_priv *priv;
+ struct ehci_hcd *ehci;
+- int err, irq, phy_num, clk = 0;
++ int err, irq, phy_num, clk = 0, rst = 0;
+
+ if (usb_disabled())
+ return -ENODEV;
+@@ -232,18 +233,24 @@ static int ehci_platform_probe(struct platform_device *dev)
+ break;
+ }
+ }
+- }
+
+- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
+- if (IS_ERR(priv->rst)) {
+- err = PTR_ERR(priv->rst);
+- if (err == -EPROBE_DEFER)
+- goto err_put_clks;
+- priv->rst = NULL;
+- } else {
+- err = reset_control_deassert(priv->rst);
+- if (err)
+- goto err_put_clks;
++ for (rst = 0; rst < EHCI_MAX_RESETS; rst++) {
++ priv->resets[rst] =
++ of_reset_control_get_by_index(dev->dev.of_node,
++ rst);
++ if (IS_ERR(priv->resets[rst])) {
++ err = PTR_ERR(priv->resets[rst]);
++ if (err == -EPROBE_DEFER)
++ goto err_reset;
++ priv->resets[rst] = NULL;
++ break;
++ }
++ err = reset_control_deassert_shared(priv->resets[rst]);
++ if (err) {
++ reset_control_put(priv->resets[rst]);
++ goto err_reset;
++ }
++ }
+ }
+
+ if (pdata->big_endian_desc)
+@@ -300,8 +307,10 @@ static int ehci_platform_probe(struct platform_device *dev)
+ if (pdata->power_off)
+ pdata->power_off(dev);
+ err_reset:
+- if (priv->rst)
+- reset_control_assert(priv->rst);
++ while (--rst >= 0) {
++ reset_control_assert_shared(priv->resets[rst]);
++ reset_control_put(priv->resets[rst]);
++ }
+ err_put_clks:
+ while (--clk >= 0)
+ clk_put(priv->clks[clk]);
+@@ -319,15 +328,17 @@ static int ehci_platform_remove(struct platform_device *dev)
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+- int clk;
++ int clk, rst;
+
+ usb_remove_hcd(hcd);
+
+ if (pdata->power_off)
+ pdata->power_off(dev);
+
+- if (priv->rst)
+- reset_control_assert(priv->rst);
++ for (rst = 0; rst < EHCI_MAX_RESETS && priv->resets[rst]; rst++) {
++ reset_control_assert_shared(priv->resets[rst]);
++ reset_control_put(priv->resets[rst]);
++ }
+
+ for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
+ clk_put(priv->clks[clk]);
diff --git a/target/linux/sunxi/patches-4.4/145-usb-ohci-plat-support-multiple-reset-ctrllines.patch b/target/linux/sunxi/patches-4.4/145-usb-ohci-plat-support-multiple-reset-ctrllines.patch
new file mode 100644
index 0000000..6f536b9
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/145-usb-ohci-plat-support-multiple-reset-ctrllines.patch
@@ -0,0 +1,132 @@
+From 5f0c864c1f207dba1db587747a58ec6b362dadf8 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sun, 29 Nov 2015 18:44:14 +0100
+Subject: [PATCH] ohci-platform: Add support for controllers with multiple
+ reset lines
+
+At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
+reset lines, the controller will not initialize while the reset for
+its companion is still asserted, which means we need to de-assert
+2 resets for the controller to work.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+Changes in v2:
+-New patch in v2 of this patch-set, to complement the identical patch for
+ the ehci-platform code
+---
+ Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +-
+ drivers/usb/host/ohci-platform.c | 49 +++++++++++++---------
+ 2 files changed, 30 insertions(+), 21 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
+index 19233b7..9df4569 100644
+--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
++++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
+@@ -14,7 +14,7 @@ Optional properties:
+ - clocks : a list of phandle + clock specifier pairs
+ - phys : phandle + phy specifier pair
+ - phy-names : "usb"
+-- resets : phandle + reset specifier pair
++- resets : a list of phandle + reset specifier pairs
+
+ Example:
+
+diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
+index c2669f18..7d8bbc4 100644
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
+@@ -33,11 +33,12 @@
+
+ #define DRIVER_DESC "OHCI generic platform driver"
+ #define OHCI_MAX_CLKS 3
++#define OHCI_MAX_RESETS 2
+ #define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
+
+ struct ohci_platform_priv {
+ struct clk *clks[OHCI_MAX_CLKS];
+- struct reset_control *rst;
++ struct reset_control *resets[OHCI_MAX_RESETS];
+ struct phy **phys;
+ int num_phys;
+ };
+@@ -117,7 +118,7 @@ static int ohci_platform_probe(struct platform_device *dev)
+ struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+ struct ohci_platform_priv *priv;
+ struct ohci_hcd *ohci;
+- int err, irq, phy_num, clk = 0;
++ int err, irq, phy_num, clk = 0, rst = 0;
+
+ if (usb_disabled())
+ return -ENODEV;
+@@ -195,19 +196,23 @@ static int ohci_platform_probe(struct platform_device *dev)
+ break;
+ }
+ }
+-
+- }
+-
+- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
+- if (IS_ERR(priv->rst)) {
+- err = PTR_ERR(priv->rst);
+- if (err == -EPROBE_DEFER)
+- goto err_put_clks;
+- priv->rst = NULL;
+- } else {
+- err = reset_control_deassert(priv->rst);
+- if (err)
+- goto err_put_clks;
++ for (rst = 0; rst < OHCI_MAX_RESETS; rst++) {
++ priv->resets[rst] =
++ of_reset_control_get_by_index(dev->dev.of_node,
++ rst);
++ if (IS_ERR(priv->resets[rst])) {
++ err = PTR_ERR(priv->resets[rst]);
++ if (err == -EPROBE_DEFER)
++ goto err_reset;
++ priv->resets[rst] = NULL;
++ break;
++ }
++ err = reset_control_deassert_shared(priv->resets[rst]);
++ if (err) {
++ reset_control_put(priv->resets[rst]);
++ goto err_reset;
++ }
++ }
+ }
+
+ if (pdata->big_endian_desc)
+@@ -265,8 +270,10 @@ static int ohci_platform_probe(struct platform_device *dev)
+ if (pdata->power_off)
+ pdata->power_off(dev);
+ err_reset:
+- if (priv->rst)
+- reset_control_assert(priv->rst);
++ while (--rst >= 0) {
++ reset_control_assert_shared(priv->resets[rst]);
++ reset_control_put(priv->resets[rst]);
++ }
+ err_put_clks:
+ while (--clk >= 0)
+ clk_put(priv->clks[clk]);
+@@ -284,15 +291,17 @@ static int ohci_platform_remove(struct platform_device *dev)
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+- int clk;
++ int clk, rst;
+
+ usb_remove_hcd(hcd);
+
+ if (pdata->power_off)
+ pdata->power_off(dev);
+
+- if (priv->rst)
+- reset_control_assert(priv->rst);
++ for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++) {
++ reset_control_assert_shared(priv->resets[rst]);
++ reset_control_put(priv->resets[rst]);
++ }
+
+ for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
+ clk_put(priv->clks[clk]);
diff --git a/target/linux/sunxi/patches-4.4/150-dt-sun7i-enable-codec-on-pcduino3.patch b/target/linux/sunxi/patches-4.4/150-dt-sun7i-enable-codec-on-pcduino3.patch
new file mode 100644
index 0000000..c0d9660
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/150-dt-sun7i-enable-codec-on-pcduino3.patch
@@ -0,0 +1,29 @@
+From 5296d8ff65298091758aa8d50d00539cd3781042 Mon Sep 17 00:00:00 2001
+From: Jelle van der Waa <jelle@vdwaa.nl>
+Date: Sun, 9 Aug 2015 18:51:22 +0200
+Subject: [PATCH] ARM: dts: sun7i: Enable audio codec on pcDuino
+
+Enable the on-chip audio codec
+
+Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+index 861a4a6..067f365 100644
+--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
++++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+@@ -111,6 +111,11 @@
+ allwinner,pins = "PH2";
+ };
+
++
++&codec {
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ };
diff --git a/target/linux/sunxi/patches-4.4/200-dt-sun7i-add-lamobo-r1.patch b/target/linux/sunxi/patches-4.4/200-dt-sun7i-add-lamobo-r1.patch
new file mode 100644
index 0000000..dceaea8
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/200-dt-sun7i-add-lamobo-r1.patch
@@ -0,0 +1,335 @@
+From 46662c86b453d7098ff22d6112d0481f07d523a1 Mon Sep 17 00:00:00 2001
+From: Jelle de Jong <jelledejong@powercraft.nl>
+Date: Sun, 18 Oct 2015 16:34:39 +0200
+Subject: [PATCH] ARM: dts: sun7i: Add dts file for the lamobo-r1 board
+
+The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such
+on the PCB, is meant as a A20 based router board. As such the board comes
+with a built-in switch chip giving it 5 gigabit ethernet boards, and it
+has a large empty area on the pcb with mounting holes which will fit a
+2.5 inch harddisk. To complete its networking features it has a
+Realtek RTL8192CU for WiFi 802.11 b/g/n.
+
+Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 297 ++++++++++++++++++++++++++++++
+ 2 files changed, 298 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index cc7309b..6f8deac 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -639,6 +639,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-hummingbird.dtb \
+ sun7i-a20-i12-tvbox.dtb \
++ sun7i-a20-lamobo-r1.dtb \
+ sun7i-a20-m3.dtb \
+ sun7i-a20-mk808c.dtb \
+ sun7i-a20-olimex-som-evb.dtb \
+diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+new file mode 100644
+index 0000000..975b0b2
+--- /dev/null
++++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+@@ -0,0 +1,297 @@
++/*
++ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun7i-a20.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "Lamobo R1";
++ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
++
++ aliases {
++ serial0 = &uart0;
++ serial1 = &uart3;
++ serial2 = &uart7;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_lamobo_r1>;
++
++ green {
++ label = "lamobo_r1:green:usr";
++ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ reg_gmac_3v3: gmac-3v3 {
++ compatible = "regulator-fixed";
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
++ regulator-name = "gmac-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ startup-delay-us = <100000>;
++ enable-active-high;
++ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
++ };
++};
++
++&ahci_pwr_pin_a {
++ allwinner,pins = "PB3";
++};
++
++&ahci {
++ target-supply = <&reg_ahci_5v>;
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
++ operating-points = <
++ /* kHz uV */
++ 960000 1400000
++ 912000 1400000
++ 864000 1350000
++ 720000 1250000
++ 528000 1150000
++ 312000 1100000
++ 144000 1050000
++ >;
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&gmac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_rgmii_a>;
++ phy = <&phy1>;
++ phy-mode = "rgmii";
++ phy-supply = <&reg_gmac_3v3>;
++ status = "okay";
++
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic@34 {
++ reg = <0x34>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++&i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++};
++
++&ir0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir0_rx_pins_a>;
++ status = "okay";
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
++ vmmc-supply = <&reg_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
++ cd-inverted;
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&otg_sram {
++ status = "okay";
++};
++
++&pio {
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
++ allwinner,pins = "PH10";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
++ allwinner,pins = "PH23";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ led_pins_lamobo_r1: led_pins@0 {
++ allwinner,pins = "PH24";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++#include "axp209.dtsi"
++
++&reg_ahci_5v {
++ gpio = <&pio 1 3 0>; /* PB3 */
++ status = "okay";
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-dll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
++&reg_usb0_vbus {
++ status = "okay";
++};
++
++&reg_usb1_vbus {
++ status = "okay";
++};
++
++&reg_usb2_vbus {
++ status = "okay";
++};
++
++&spi0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi0_pins_a>,
++ <&spi0_cs0_pins_a>,
++ <&spi0_cs1_pins_a>;
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&uart3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart3_pins_b>;
++ status = "okay";
++};
++
++&uart7 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart7_pins_a>;
++ status = "okay";
++};
++
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usb_power_supply {
++ status = "okay";
++};
++
++&usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_power-supply = <&usb_power_supply>;
++ usb0_vbus-supply = <&reg_usb0_vbus>;
++ usb1_vbus-supply = <&reg_usb1_vbus>;
++ usb2_vbus-supply = <&reg_usb2_vbus>;
++ status = "okay";
++};