summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2014-12-07 15:34:28 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2014-12-07 15:34:28 +0000
commit8e738da02c77b69d2fa8c1ef52faf2af6388b916 (patch)
treeab3580332d8134c023a550f443fd0da45837ac72 /target/linux
parentdc6171c73454e1ed25a89e2bc5b5c7730aa38c3d (diff)
downloadmtk-20170518-8e738da02c77b69d2fa8c1ef52faf2af6388b916.zip
mtk-20170518-8e738da02c77b69d2fa8c1ef52faf2af6388b916.tar.gz
mtk-20170518-8e738da02c77b69d2fa8c1ef52faf2af6388b916.tar.bz2
brcm47xx: remove kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43535
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/brcm47xx/config-3.10161
-rw-r--r--target/linux/brcm47xx/patches-3.10/020-mtd-bcm47xxpart-handle-malloc-failures.patch30
-rw-r--r--target/linux/brcm47xx/patches-3.10/021-mtd-bcm47xxpart-detect-block-aligned-Squashfs-partit.patch50
-rw-r--r--target/linux/brcm47xx/patches-3.10/022-mtd-bcm47xxpart-detect-factory-partition.patch41
-rw-r--r--target/linux/brcm47xx/patches-3.10/023-mtd-bcm47xxpart-find-boot-partition-by-CFE-magic.patch43
-rw-r--r--target/linux/brcm47xx/patches-3.10/024-mtd-bcm47xxpart-alternative-MAGIC-for-board_data-par.patch52
-rw-r--r--target/linux/brcm47xx/patches-3.10/027-mtd-bcm47xxpart-get-nvram.patch34
-rw-r--r--target/linux/brcm47xx/patches-3.10/050-mtd_bcm47xxsflash_implement_ChipCommon_RW_ops.patch53
-rw-r--r--target/linux/brcm47xx/patches-3.10/051-mtd_bcm47xxsflash_implement_polling_chip_status.patch87
-rw-r--r--target/linux/brcm47xx/patches-3.10/052-mtd_bcm47xxsflash_implement_erasing_support.patch74
-rw-r--r--target/linux/brcm47xx/patches-3.10/053-mtd_bcm47xxsflash_writing_support.patch160
-rw-r--r--target/linux/brcm47xx/patches-3.10/054-mtd_bcm47xxsflash_convert_kzalloc_to_avoid_invalid_access.patch62
-rw-r--r--target/linux/brcm47xx/patches-3.10/055-mtd_bcm47xxsflash_convert_to_module_platform_driver.patch39
-rw-r--r--target/linux/brcm47xx/patches-3.10/070-MIPS-BCM47XX-add-board-detection.patch469
-rw-r--r--target/linux/brcm47xx/patches-3.10/071-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch55
-rw-r--r--target/linux/brcm47xx/patches-3.10/072-MIPS-BCM47XX-only-print-SoC-name-in-system-type-in-c.patch90
-rw-r--r--target/linux/brcm47xx/patches-3.10/073-MIPS-BCM47XX-print-board-name-in-machine-entry-in-cp.patch33
-rw-r--r--target/linux/brcm47xx/patches-3.10/075-MIPS-BCM47XX-fix-detection-for-some-boards.patch51
-rw-r--r--target/linux/brcm47xx/patches-3.10/076-MIPS-BCM47XX-add-board-detection-for-Linksys-WRT54GS.patch34
-rw-r--r--target/linux/brcm47xx/patches-3.10/077-MIPS-BCM47XX-fix-sparse-warnings-in-board.c.patch113
-rw-r--r--target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch124
-rw-r--r--target/linux/brcm47xx/patches-3.10/081-MIPS-BCM47XX-Remove-CFE-support.patch151
-rw-r--r--target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch53
-rw-r--r--target/linux/brcm47xx/patches-3.10/085-MIPS-BCM47XX-Get-GPIO-pin-from-nvram-configuration.patch54
-rw-r--r--target/linux/brcm47xx/patches-3.10/090-MIPS-BCM47XX-fix-clock-detection-for-BCM5354-with-20.patch57
-rw-r--r--target/linux/brcm47xx/patches-3.10/091-MIPS-BCM47XX-fix-detected-clock-on-Asus-WL520GC-and-.patch49
-rw-r--r--target/linux/brcm47xx/patches-3.10/095-MIPS-BCM47XX-Fix-some-very-confused-types-and-data-c.patch86
-rw-r--r--target/linux/brcm47xx/patches-3.10/110-MIPS-BCM47XX-add-vint-irq.patch64
-rw-r--r--target/linux/brcm47xx/patches-3.10/111-MIPS-BCM47XX-add-cpu-overwrite.patch95
-rw-r--r--target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch160
-rw-r--r--target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch152
-rw-r--r--target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch497
-rw-r--r--target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch532
-rw-r--r--target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch36
-rw-r--r--target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch118
-rw-r--r--target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch49
-rw-r--r--target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-Drop-WGT634U-hacks.patch207
-rw-r--r--target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch78
-rw-r--r--target/linux/brcm47xx/patches-3.10/139-MIPS-BCM47XX-detect-more-linksys-devices.patch39
-rw-r--r--target/linux/brcm47xx/patches-3.10/140-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch133
-rw-r--r--target/linux/brcm47xx/patches-3.10/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch89
-rw-r--r--target/linux/brcm47xx/patches-3.10/142-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch77
-rw-r--r--target/linux/brcm47xx/patches-3.10/143-MIPS-BCM47XX-Check-all-32-GPIOs-when-looking-for-a-p.patch30
-rw-r--r--target/linux/brcm47xx/patches-3.10/144-make-reboot-more-reliable.patch40
-rw-r--r--target/linux/brcm47xx/patches-3.10/145-MIPS-BCM47XX-fixup-broken-MAC-addresses-in-nvram.patch95
-rw-r--r--target/linux/brcm47xx/patches-3.10/146-MIPS-BCM47XX-add-Microsoft-MN-700-and-Asus-WL500G.patch170
-rw-r--r--target/linux/brcm47xx/patches-3.10/147-MIPS-BCM47xx-Distinguish-WRT54G-series-devices-by-bo.patch110
-rw-r--r--target/linux/brcm47xx/patches-3.10/148-MIPS-BCM47xx-Fix-LEDs-on-WRT54GS-V1.0.patch45
-rw-r--r--target/linux/brcm47xx/patches-3.10/149-MIPS-BCM47XX-Move-shared-symbols-to-the-config-BCM47.patch50
-rw-r--r--target/linux/brcm47xx/patches-3.10/150-MIPS-BCM47XX-Select-SYS_SUPPORTS_HIGHMEM-for-BCM47XX.patch32
-rw-r--r--target/linux/brcm47xx/patches-3.10/151-MIPS-BCM47XX-Devices-database-update-for-3.17.patch183
-rw-r--r--target/linux/brcm47xx/patches-3.10/152-Revert-MIPS-Delete-unused-function-add_temporary_ent.patch107
-rw-r--r--target/linux/brcm47xx/patches-3.10/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch166
-rw-r--r--target/linux/brcm47xx/patches-3.10/159-cpu_fixes.patch368
-rw-r--r--target/linux/brcm47xx/patches-3.10/160-kmap_coherent.patch70
-rw-r--r--target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch56
-rw-r--r--target/linux/brcm47xx/patches-3.10/200-b44-add-support-for-Byte-Queue-Limits.patch43
-rw-r--r--target/linux/brcm47xx/patches-3.10/201-b44-check-register-instead-of-PHY-address-to-detect-.patch116
-rw-r--r--target/linux/brcm47xx/patches-3.10/202-b44-rename-B44_PHY_ADDR_NO_PHY-to-B44_PHY_ADDR_NO_LO.patch43
-rw-r--r--target/linux/brcm47xx/patches-3.10/203-b44-abort-when-no-PHY-is-available-at-all.patch41
-rw-r--r--target/linux/brcm47xx/patches-3.10/204-b44-rename-b44_mii_-read-write-to-b44_mdio_-read-wri.patch49
-rw-r--r--target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch332
-rw-r--r--target/linux/brcm47xx/patches-3.10/206-b44-activate-PHY-when-MAC-is-off.patch29
-rw-r--r--target/linux/brcm47xx/patches-3.10/207-b44-do-not-set-PHY-address-to-30-for-every-ext-PHY.patch32
-rw-r--r--target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch97
-rw-r--r--target/linux/brcm47xx/patches-3.10/209-b44-register-adm-switch.patch122
-rw-r--r--target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch54
-rw-r--r--target/linux/brcm47xx/patches-3.10/211-b44-start_phy.patch47
-rw-r--r--target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch25
-rw-r--r--target/linux/brcm47xx/patches-3.10/300-fork_cacheflush.patch11
-rw-r--r--target/linux/brcm47xx/patches-3.10/310-no_highpage.patch66
-rw-r--r--target/linux/brcm47xx/patches-3.10/610-pci_ide_fix.patch14
-rw-r--r--target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch197
-rw-r--r--target/linux/brcm47xx/patches-3.10/791-tg3-no-pci-sleep.patch17
-rw-r--r--target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch296
-rw-r--r--target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch101
-rw-r--r--target/linux/brcm47xx/patches-3.10/920-cache-wround.patch138
-rw-r--r--target/linux/brcm47xx/patches-3.10/940-bcm47xx-yenta.patch46
-rw-r--r--target/linux/brcm47xx/patches-3.10/976-ssb_increase_pci_delay.patch11
-rw-r--r--target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch13
-rw-r--r--target/linux/brcm47xx/patches-3.10/999-wl_exports.patch22
81 files changed, 0 insertions, 8115 deletions
diff --git a/target/linux/brcm47xx/config-3.10 b/target/linux/brcm47xx/config-3.10
deleted file mode 100644
index d159cd8..0000000
--- a/target/linux/brcm47xx/config-3.10
+++ /dev/null
@@ -1,161 +0,0 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_B53=y
-# CONFIG_B53_MMAP_DRIVER is not set
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-# CONFIG_B53_SRAB_DRIVER is not set
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_BCMA=y
-CONFIG_BCM47XX_SSB=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_MIPS=y
-CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_NFLASH=y
-CONFIG_BCMA_SFLASH=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_WDT=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO_REGISTER=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCM47XXNFLASH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_STALL_COMMON is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_GPIO=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SFLASH=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm47xx/patches-3.10/020-mtd-bcm47xxpart-handle-malloc-failures.patch b/target/linux/brcm47xx/patches-3.10/020-mtd-bcm47xxpart-handle-malloc-failures.patch
deleted file mode 100644
index ad24b59..0000000
--- a/target/linux/brcm47xx/patches-3.10/020-mtd-bcm47xxpart-handle-malloc-failures.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 99b1d1887fee36ef9ff5d2ee24f0cf3e8c172104 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 13 Oct 2013 22:53:49 +0200
-Subject: [PATCH] mtd: bcm47xxpart: handle malloc failures
-
-Handle return NULL in malloc.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -71,7 +71,14 @@ static int bcm47xxpart_parse(struct mtd_
- /* Alloc */
- parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
- GFP_KERNEL);
-+ if (!parts)
-+ return -ENOMEM;
-+
- buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
-+ if (!buf) {
-+ kfree(parts);
-+ return -ENOMEM;
-+ }
-
- /* Parse block by block looking for magics */
- for (offset = 0; offset <= master->size - blocksize;
diff --git a/target/linux/brcm47xx/patches-3.10/021-mtd-bcm47xxpart-detect-block-aligned-Squashfs-partit.patch b/target/linux/brcm47xx/patches-3.10/021-mtd-bcm47xxpart-detect-block-aligned-Squashfs-partit.patch
deleted file mode 100644
index 72891b2..0000000
--- a/target/linux/brcm47xx/patches-3.10/021-mtd-bcm47xxpart-detect-block-aligned-Squashfs-partit.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 020c6bcfbeabee72c18d862769d72cf9241b9004 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 21 Oct 2013 22:34:37 +0200
-Subject: [PATCH] mtd: bcm47xxpart: detect block aligned Squashfs partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Most of the bcm47xx devices use TRX format for storing kernel and some
-partition like Squashfs or JFFS2. This is pretty flexible solution, CFE
-(the bootloader) just writes (and later boots) TRX at some hardcoded
-place and paritions can vary in the size.
-
-However some devices don't use TRX format. Very recently we have
-discovered ZTE H218N that has kernel and rootfs partitions at some
-"random" places.
-
-This patch allows Linux find a rootfs partition after installing custom
-image with a CFE bootloader.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -32,6 +32,7 @@
- #define ML_MAGIC1 0x39685a42
- #define ML_MAGIC2 0x26594131
- #define TRX_MAGIC 0x30524448
-+#define SQSH_MAGIC 0x71736873 /* shsq */
-
- struct trx_header {
- uint32_t magic;
-@@ -174,6 +175,13 @@ static int bcm47xxpart_parse(struct mtd_
- offset = rounddown(offset + trx->length, blocksize);
- continue;
- }
-+
-+ /* Squashfs on devices not using TRX */
-+ if (buf[0x000 / 4] == SQSH_MAGIC) {
-+ bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
-+ offset, 0);
-+ continue;
-+ }
- }
-
- /* Look for NVRAM at the end of the last block. */
diff --git a/target/linux/brcm47xx/patches-3.10/022-mtd-bcm47xxpart-detect-factory-partition.patch b/target/linux/brcm47xx/patches-3.10/022-mtd-bcm47xxpart-detect-factory-partition.patch
deleted file mode 100644
index 389976c..0000000
--- a/target/linux/brcm47xx/patches-3.10/022-mtd-bcm47xxpart-detect-factory-partition.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 33094c736cd36a6cecadae6bce4daba89dabc326 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 21 Oct 2013 22:35:34 +0200
-Subject: [PATCH] mtd: bcm47xxpart: detect "factory" partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-A new type of partition with magic FCTY was found on Huawei E970:
-46 43 54 59 4b 51 37 4e 41 42 31 38 41 32 39 30 |FCTYKQ7NAB18A290|
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -27,6 +27,7 @@
-
- /* Magics */
- #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
-+#define FACTORY_MAGIC 0x59544346 /* FCTY */
- #define POT_MAGIC1 0x54544f50 /* POTT */
- #define POT_MAGIC2 0x504f /* OP */
- #define ML_MAGIC1 0x39685a42
-@@ -117,6 +118,13 @@ static int bcm47xxpart_parse(struct mtd_
- offset, MTD_WRITEABLE);
- continue;
- }
-+
-+ /* Found on Huawei E970 */
-+ if (buf[0x000 / 4] == FACTORY_MAGIC) {
-+ bcm47xxpart_add_part(&parts[curr_part++], "factory",
-+ offset, MTD_WRITEABLE);
-+ continue;
-+ }
-
- /* POT(TOP) */
- if (buf[0x000 / 4] == POT_MAGIC1 &&
diff --git a/target/linux/brcm47xx/patches-3.10/023-mtd-bcm47xxpart-find-boot-partition-by-CFE-magic.patch b/target/linux/brcm47xx/patches-3.10/023-mtd-bcm47xxpart-find-boot-partition-by-CFE-magic.patch
deleted file mode 100644
index 599114b..0000000
--- a/target/linux/brcm47xx/patches-3.10/023-mtd-bcm47xxpart-find-boot-partition-by-CFE-magic.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 4f8aaf72287578c846ed7ac8c6114aacbf416e45 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 21 Dec 2013 19:39:11 +0100
-Subject: [PATCH] mtd: bcm47xxpart: find boot partition by CFE magic
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some devices have even nicer-to-recognize CFE thanks to the magic.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -23,10 +23,11 @@
- * Amount of bytes we read when analyzing each block of flash memory.
- * Set it big enough to allow detecting partition and reading important data.
- */
--#define BCM47XXPART_BYTES_TO_READ 0x404
-+#define BCM47XXPART_BYTES_TO_READ 0x4e8
-
- /* Magics */
- #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
-+#define CFE_MAGIC 0x43464531 /* 1EFC */
- #define FACTORY_MAGIC 0x59544346 /* FCTY */
- #define POT_MAGIC1 0x54544f50 /* POTT */
- #define POT_MAGIC2 0x504f /* OP */
-@@ -102,8 +103,9 @@ static int bcm47xxpart_parse(struct mtd_
- continue;
- }
-
-- /* CFE has small NVRAM at 0x400 */
-- if (buf[0x400 / 4] == NVRAM_HEADER) {
-+ /* Magic or small NVRAM at 0x400 */
-+ if ((buf[0x4e0 / 4] == CFE_MAGIC && buf[0x4e4 / 4] == CFE_MAGIC) ||
-+ (buf[0x400 / 4] == NVRAM_HEADER)) {
- bcm47xxpart_add_part(&parts[curr_part++], "boot",
- offset, MTD_WRITEABLE);
- continue;
diff --git a/target/linux/brcm47xx/patches-3.10/024-mtd-bcm47xxpart-alternative-MAGIC-for-board_data-par.patch b/target/linux/brcm47xx/patches-3.10/024-mtd-bcm47xxpart-alternative-MAGIC-for-board_data-par.patch
deleted file mode 100644
index 5f9a5b9..0000000
--- a/target/linux/brcm47xx/patches-3.10/024-mtd-bcm47xxpart-alternative-MAGIC-for-board_data-par.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From f0501e81fbaa51cfc8c28c60bc3fc7965fde94f4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 21 Dec 2013 19:39:12 +0100
-Subject: [PATCH] mtd: bcm47xxpart: alternative MAGIC for board_data partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some devices (like WNDR3700v3) have board_data without MPFR magic, some
-extra header or extra NVRAM around 0x100. In such case we have to look
-for another magic which is BD 0B 0D BD (BD probably stands for Board
-Data). It's located "far far away", so instead of extending buffer add
-another mtd_read.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -27,6 +27,7 @@
-
- /* Magics */
- #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
-+#define BOARD_DATA_MAGIC2 0xBD0D0BBD
- #define CFE_MAGIC 0x43464531 /* 1EFC */
- #define FACTORY_MAGIC 0x59544346 /* FCTY */
- #define POT_MAGIC1 0x54544f50 /* POTT */
-@@ -192,6 +193,21 @@ static int bcm47xxpart_parse(struct mtd_
- offset, 0);
- continue;
- }
-+
-+ /* Read middle of the block */
-+ if (mtd_read(master, offset + 0x8000, 0x4,
-+ &bytes_read, (uint8_t *)buf) < 0) {
-+ pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
-+ offset);
-+ continue;
-+ }
-+
-+ /* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */
-+ if (buf[0x000 / 4] == BOARD_DATA_MAGIC2) {
-+ bcm47xxpart_add_part(&parts[curr_part++], "board_data",
-+ offset, MTD_WRITEABLE);
-+ continue;
-+ }
- }
-
- /* Look for NVRAM at the end of the last block. */
diff --git a/target/linux/brcm47xx/patches-3.10/027-mtd-bcm47xxpart-get-nvram.patch b/target/linux/brcm47xx/patches-3.10/027-mtd-bcm47xxpart-get-nvram.patch
deleted file mode 100644
index 086d7b3..0000000
--- a/target/linux/brcm47xx/patches-3.10/027-mtd-bcm47xxpart-get-nvram.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -68,6 +68,7 @@ static int bcm47xxpart_parse(struct mtd_
- int trx_part = -1;
- int last_trx_part = -1;
- int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
-+ bool found_nvram = false;
-
- if (blocksize <= 0x10000)
- blocksize = 0x10000;
-@@ -229,12 +230,23 @@ static int bcm47xxpart_parse(struct mtd_
- if (buf[0] == NVRAM_HEADER) {
- bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- master->size - blocksize, 0);
-+ found_nvram = true;
- break;
- }
- }
-
- kfree(buf);
-
-+ if (!found_nvram) {
-+ pr_err("can not find a nvram partition reserve last block\n");
-+ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
-+ master->size - blocksize * 2, MTD_WRITEABLE);
-+ for (i = 0; i < curr_part; i++) {
-+ if (parts[i].size + parts[i].offset == master->size)
-+ parts[i].offset -= blocksize * 2;
-+ }
-+ }
-+
- /*
- * Assume that partitions end at the beginning of the one they are
- * followed by.
diff --git a/target/linux/brcm47xx/patches-3.10/050-mtd_bcm47xxsflash_implement_ChipCommon_RW_ops.patch b/target/linux/brcm47xx/patches-3.10/050-mtd_bcm47xxsflash_implement_ChipCommon_RW_ops.patch
deleted file mode 100644
index 8f43ebb..0000000
--- a/target/linux/brcm47xx/patches-3.10/050-mtd_bcm47xxsflash_implement_ChipCommon_RW_ops.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-commit c8a1de474f49bd928f84e7a99b6f3d23a65b5637
-Author: Rafał Miłecki <zajec5@gmail.com>
-Date: Sun Mar 24 21:53:24 2013 +0100
-
- mtd: bcm47xxsflash: implement ChipCommon R/W ops
-
- They are needed for erasing/writing. Use a magic pointers and small
- functions to preapre code for adding other buses support in the future
- (like SSB).
-
- Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
- Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
-
---- a/drivers/mtd/devices/bcm47xxsflash.c
-+++ b/drivers/mtd/devices/bcm47xxsflash.c
-@@ -48,6 +48,17 @@ static void bcm47xxsflash_fill_mtd(struc
- * BCMA
- **************************************************/
-
-+static int bcm47xxsflash_bcma_cc_read(struct bcm47xxsflash *b47s, u16 offset)
-+{
-+ return bcma_cc_read32(b47s->bcma_cc, offset);
-+}
-+
-+static void bcm47xxsflash_bcma_cc_write(struct bcm47xxsflash *b47s, u16 offset,
-+ u32 value)
-+{
-+ bcma_cc_write32(b47s->bcma_cc, offset, value);
-+}
-+
- static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
- {
- struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
-@@ -62,6 +73,8 @@ static int bcm47xxsflash_bcma_probe(stru
- sflash->priv = b47s;
-
- b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash);
-+ b47s->cc_read = bcm47xxsflash_bcma_cc_read;
-+ b47s->cc_write = bcm47xxsflash_bcma_cc_write;
-
- switch (b47s->bcma_cc->capabilities & BCMA_CC_CAP_FLASHT) {
- case BCMA_CC_FLASHT_STSER:
---- a/drivers/mtd/devices/bcm47xxsflash.h
-+++ b/drivers/mtd/devices/bcm47xxsflash.h
-@@ -60,6 +60,8 @@ enum bcm47xxsflash_type {
-
- struct bcm47xxsflash {
- struct bcma_drv_cc *bcma_cc;
-+ int (*cc_read)(struct bcm47xxsflash *b47s, u16 offset);
-+ void (*cc_write)(struct bcm47xxsflash *b47s, u16 offset, u32 value);
-
- enum bcm47xxsflash_type type;
-
diff --git a/target/linux/brcm47xx/patches-3.10/051-mtd_bcm47xxsflash_implement_polling_chip_status.patch b/target/linux/brcm47xx/patches-3.10/051-mtd_bcm47xxsflash_implement_polling_chip_status.patch
deleted file mode 100644
index 3b45234..0000000
--- a/target/linux/brcm47xx/patches-3.10/051-mtd_bcm47xxsflash_implement_polling_chip_status.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-commit 7026e9844112fa33e5ffcd562daf0c919b16a9d1
-Author: Rafał Miłecki <zajec5@gmail.com>
-Date: Sun Mar 24 21:51:31 2013 +0100
-
- mtd: bcm47xxsflash: implement polling chip status
-
- Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
- Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
-
---- a/drivers/mtd/devices/bcm47xxsflash.c
-+++ b/drivers/mtd/devices/bcm47xxsflash.c
-@@ -1,6 +1,7 @@
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/slab.h>
-+#include <linux/delay.h>
- #include <linux/mtd/mtd.h>
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
-@@ -12,6 +13,57 @@ MODULE_DESCRIPTION("Serial flash driver
-
- static const char * const probes[] = { "bcm47xxpart", NULL };
-
-+/**************************************************
-+ * Various helpers
-+ **************************************************/
-+
-+static void bcm47xxsflash_cmd(struct bcm47xxsflash *b47s, u32 opcode)
-+{
-+ int i;
-+
-+ b47s->cc_write(b47s, BCMA_CC_FLASHCTL, BCMA_CC_FLASHCTL_START | opcode);
-+ for (i = 0; i < 1000; i++) {
-+ if (!(b47s->cc_read(b47s, BCMA_CC_FLASHCTL) &
-+ BCMA_CC_FLASHCTL_BUSY))
-+ return;
-+ cpu_relax();
-+ }
-+ pr_err("Control command failed (timeout)!\n");
-+}
-+
-+static int bcm47xxsflash_poll(struct bcm47xxsflash *b47s, int timeout)
-+{
-+ unsigned long deadline = jiffies + timeout;
-+
-+ do {
-+ switch (b47s->type) {
-+ case BCM47XXSFLASH_TYPE_ST:
-+ bcm47xxsflash_cmd(b47s, OPCODE_ST_RDSR);
-+ if (!(b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
-+ SR_ST_WIP))
-+ return 0;
-+ break;
-+ case BCM47XXSFLASH_TYPE_ATMEL:
-+ bcm47xxsflash_cmd(b47s, OPCODE_AT_STATUS);
-+ if (b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
-+ SR_AT_READY)
-+ return 0;
-+ break;
-+ }
-+
-+ cpu_relax();
-+ udelay(1);
-+ } while (!time_after_eq(jiffies, deadline));
-+
-+ pr_err("Timeout waiting for flash to be ready!\n");
-+
-+ return -EBUSY;
-+}
-+
-+/**************************************************
-+ * MTD ops
-+ **************************************************/
-+
- static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
- {
-@@ -97,6 +149,9 @@ static int bcm47xxsflash_bcma_probe(stru
- goto err_dev_reg;
- }
-
-+ if (bcm47xxsflash_poll(b47s, HZ / 10))
-+ pr_warn("Serial flash busy\n");
-+
- return 0;
-
- err_dev_reg:
diff --git a/target/linux/brcm47xx/patches-3.10/052-mtd_bcm47xxsflash_implement_erasing_support.patch b/target/linux/brcm47xx/patches-3.10/052-mtd_bcm47xxsflash_implement_erasing_support.patch
deleted file mode 100644
index 3446a9f..0000000
--- a/target/linux/brcm47xx/patches-3.10/052-mtd_bcm47xxsflash_implement_erasing_support.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: bcm47xxsflash: implement erasing support
-Date: Tue, 21 May 2013 21:03:46 +0200
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-This has been succesfully tested on BCM4706.
----
- drivers/mtd/devices/bcm47xxsflash.c | 43 +++++++++++++++++++++++++++++++++--
- 1 file changed, 41 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/devices/bcm47xxsflash.c
-+++ b/drivers/mtd/devices/bcm47xxsflash.c
-@@ -64,6 +64,42 @@ static int bcm47xxsflash_poll(struct bcm
- * MTD ops
- **************************************************/
-
-+static int bcm47xxsflash_erase(struct mtd_info *mtd, struct erase_info *erase)
-+{
-+ struct bcm47xxsflash *b47s = mtd->priv;
-+ int err;
-+
-+ switch (b47s->type) {
-+ case BCM47XXSFLASH_TYPE_ST:
-+ bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
-+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr);
-+ /* Newer flashes have "sub-sectors" which can be erased
-+ * independently with a new command: ST_SSE. The ST_SE command
-+ * erases 64KB just as before.
-+ */
-+ if (b47s->blocksize < (64 * 1024))
-+ bcm47xxsflash_cmd(b47s, OPCODE_ST_SSE);
-+ else
-+ bcm47xxsflash_cmd(b47s, OPCODE_ST_SE);
-+ break;
-+ case BCM47XXSFLASH_TYPE_ATMEL:
-+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr << 1);
-+ bcm47xxsflash_cmd(b47s, OPCODE_AT_PAGE_ERASE);
-+ break;
-+ }
-+
-+ err = bcm47xxsflash_poll(b47s, HZ);
-+ if (err)
-+ erase->state = MTD_ERASE_FAILED;
-+ else
-+ erase->state = MTD_ERASE_DONE;
-+
-+ if (erase->callback)
-+ erase->callback(erase);
-+
-+ return err;
-+}
-+
- static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
- {
-@@ -88,12 +124,15 @@ static void bcm47xxsflash_fill_mtd(struc
- mtd->name = "bcm47xxsflash";
- mtd->owner = THIS_MODULE;
- mtd->type = MTD_ROM;
-- mtd->size = b47s->size;
-- mtd->_read = bcm47xxsflash_read;
-
- /* TODO: implement writing support and verify/change following code */
- mtd->flags = MTD_CAP_ROM;
-+ mtd->size = b47s->size;
-+ mtd->erasesize = b47s->blocksize;
- mtd->writebufsize = mtd->writesize = 1;
-+
-+ mtd->_erase = bcm47xxsflash_erase;
-+ mtd->_read = bcm47xxsflash_read;
- }
-
- /**************************************************
diff --git a/target/linux/brcm47xx/patches-3.10/053-mtd_bcm47xxsflash_writing_support.patch b/target/linux/brcm47xx/patches-3.10/053-mtd_bcm47xxsflash_writing_support.patch
deleted file mode 100644
index 1938a41..0000000
--- a/target/linux/brcm47xx/patches-3.10/053-mtd_bcm47xxsflash_writing_support.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [RFC][PATCH] mtd: bcm47xxsflash: writing support
-Date: Wed, 22 May 2013 14:39:02 +0200
-
----
- drivers/mtd/devices/bcm47xxsflash.c | 130 +++++++++++++++++++++++++++++++++--
- 1 file changed, 126 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/devices/bcm47xxsflash.c
-+++ b/drivers/mtd/devices/bcm47xxsflash.c
-@@ -116,6 +116,127 @@ static int bcm47xxsflash_read(struct mtd
- return len;
- }
-
-+static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len,
-+ const u_char *buf)
-+{
-+ struct bcm47xxsflash *b47s = mtd->priv;
-+ int written = 0;
-+
-+ /* Enable writes */
-+ bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
-+
-+ /* Write first byte */
-+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, offset);
-+ b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
-+
-+ /* Program page */
-+ if (b47s->bcma_cc->core->id.rev < 20) {
-+ bcm47xxsflash_cmd(b47s, OPCODE_ST_PP);
-+ return 1; /* 1B written */
-+ }
-+
-+ /* Program page and set CSA (on newer chips we can continue writing) */
-+ bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | OPCODE_ST_PP);
-+ offset++;
-+ len--;
-+ written++;
-+
-+ while (len > 0) {
-+ /* Page boundary, another function call is needed */
-+ if ((offset & 0xFF) == 0)
-+ break;
-+
-+ bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | *buf++);
-+ offset++;
-+ len--;
-+ written++;
-+ }
-+
-+ /* All done, drop CSA & poll */
-+ b47s->cc_write(b47s, BCMA_CC_FLASHCTL, 0);
-+ udelay(1);
-+ if (bcm47xxsflash_poll(b47s, HZ / 10))
-+ pr_err("Flash rejected dropping CSA\n");
-+
-+ return written;
-+}
-+
-+static int bcm47xxsflash_write_at(struct mtd_info *mtd, u32 offset, size_t len,
-+ const u_char *buf)
-+{
-+ struct bcm47xxsflash *b47s = mtd->priv;
-+ u32 mask = b47s->blocksize - 1;
-+ u32 page = (offset & ~mask) << 1;
-+ u32 byte = offset & mask;
-+ int written = 0;
-+
-+ /* If we don't overwrite whole page, read it to the buffer first */
-+ if (byte || (len < b47s->blocksize)) {
-+ int err;
-+
-+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
-+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_LOAD);
-+ /* 250 us for AT45DB321B */
-+ err = bcm47xxsflash_poll(b47s, HZ / 1000);
-+ if (err) {
-+ pr_err("Timeout reading page 0x%X info buffer\n", page);
-+ return err;
-+ }
-+ }
-+
-+ /* Change buffer content with our data */
-+ while (len > 0) {
-+ /* Page boundary, another function call is needed */
-+ if (byte == b47s->blocksize)
-+ break;
-+
-+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, byte++);
-+ b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
-+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_WRITE);
-+ len--;
-+ written++;
-+ }
-+
-+ /* Program page with the buffer content */
-+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
-+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_PROGRAM);
-+
-+ return written;
-+}
-+
-+static int bcm47xxsflash_write(struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t *retlen, const u_char *buf)
-+{
-+ struct bcm47xxsflash *b47s = mtd->priv;
-+ int written;
-+
-+ /* Writing functions can return without writing all passed data, for
-+ * example when the hardware is too old or when we git page boundary.
-+ */
-+ while (len > 0) {
-+ switch (b47s->type) {
-+ case BCM47XXSFLASH_TYPE_ST:
-+ written = bcm47xxsflash_write_st(mtd, to, len, buf);
-+ break;
-+ case BCM47XXSFLASH_TYPE_ATMEL:
-+ written = bcm47xxsflash_write_at(mtd, to, len, buf);
-+ break;
-+ default:
-+ BUG_ON(1);
-+ }
-+ if (written < 0) {
-+ pr_err("Error writing at offset 0x%llX\n", to);
-+ return written;
-+ }
-+ to += (loff_t)written;
-+ len -= written;
-+ *retlen += written;
-+ buf += written;
-+ }
-+
-+ return 0;
-+}
-+
- static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
- {
- struct mtd_info *mtd = &b47s->mtd;
-@@ -123,16 +244,17 @@ static void bcm47xxsflash_fill_mtd(struc
- mtd->priv = b47s;
- mtd->name = "bcm47xxsflash";
- mtd->owner = THIS_MODULE;
-- mtd->type = MTD_ROM;
-
-- /* TODO: implement writing support and verify/change following code */
-- mtd->flags = MTD_CAP_ROM;
-+ mtd->type = MTD_NORFLASH;
-+ mtd->flags = MTD_CAP_NORFLASH;
- mtd->size = b47s->size;
- mtd->erasesize = b47s->blocksize;
-- mtd->writebufsize = mtd->writesize = 1;
-+ mtd->writesize = 1;
-+ mtd->writebufsize = 1;
-
- mtd->_erase = bcm47xxsflash_erase;
- mtd->_read = bcm47xxsflash_read;
-+ mtd->_write = bcm47xxsflash_write;
- }
-
- /**************************************************
diff --git a/target/linux/brcm47xx/patches-3.10/054-mtd_bcm47xxsflash_convert_kzalloc_to_avoid_invalid_access.patch b/target/linux/brcm47xx/patches-3.10/054-mtd_bcm47xxsflash_convert_kzalloc_to_avoid_invalid_access.patch
deleted file mode 100644
index 3e8a44c..0000000
--- a/target/linux/brcm47xx/patches-3.10/054-mtd_bcm47xxsflash_convert_kzalloc_to_avoid_invalid_access.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-Date: Thu, 30 May 2013 10:22:12 +0800
-From: Libo Chen <clbchenlibo.chen@huawei.com>
-Subject: [PATCH RESEND 1/2] mtd: bcm47: convert kzalloc to avoid invalid access
-
-
-mtd is just member of bcm47xxsflash, so we should free bcm47xxsflash not its member.
-So I use devm_kazlloc instead of kazlloc to avoid it.
-
-* Changelog:
- convert to devm_kzalloc
-
-Signed-off-by: Libo chen <libo.chen@huawei.com>
-Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
----
- drivers/mtd/devices/bcm47xxsflash.c | 16 ++++------------
- 1 files changed, 4 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/devices/bcm47xxsflash.c
-+++ b/drivers/mtd/devices/bcm47xxsflash.c
-@@ -278,11 +278,9 @@ static int bcm47xxsflash_bcma_probe(stru
- struct bcm47xxsflash *b47s;
- int err;
-
-- b47s = kzalloc(sizeof(*b47s), GFP_KERNEL);
-- if (!b47s) {
-- err = -ENOMEM;
-- goto out;
-- }
-+ b47s = devm_kzalloc(&pdev->dev, sizeof(*b47s), GFP_KERNEL);
-+ if (!b47s)
-+ return -ENOMEM;
- sflash->priv = b47s;
-
- b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash);
-@@ -307,18 +305,13 @@ static int bcm47xxsflash_bcma_probe(stru
- err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
- if (err) {
- pr_err("Failed to register MTD device: %d\n", err);
-- goto err_dev_reg;
-+ return err;
- }
-
- if (bcm47xxsflash_poll(b47s, HZ / 10))
- pr_warn("Serial flash busy\n");
-
- return 0;
--
--err_dev_reg:
-- kfree(&b47s->mtd);
--out:
-- return err;
- }
-
- static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
-@@ -327,7 +320,6 @@ static int bcm47xxsflash_bcma_remove(str
- struct bcm47xxsflash *b47s = sflash->priv;
-
- mtd_device_unregister(&b47s->mtd);
-- kfree(b47s);
-
- return 0;
- }
diff --git a/target/linux/brcm47xx/patches-3.10/055-mtd_bcm47xxsflash_convert_to_module_platform_driver.patch b/target/linux/brcm47xx/patches-3.10/055-mtd_bcm47xxsflash_convert_to_module_platform_driver.patch
deleted file mode 100644
index 5ef087b..0000000
--- a/target/linux/brcm47xx/patches-3.10/055-mtd_bcm47xxsflash_convert_to_module_platform_driver.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Date: Thu, 30 May 2013 10:22:16 +0800
-From: Libo Chen <clbchenlibo.chen@huawei.com>
-Subject: [PATCH RESEND 2/2] mtd: bcm47: convert to module_platform_driver
- instead of init/exit
-
-convert to module_platform_driver instead of init/exit
-
-Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Signed-off-by: Libo chen <libo.chen@huawei.com>
----
- drivers/mtd/devices/bcm47xxsflash.c | 20 +-------------------
- 1 files changed, 1 insertions(+), 19 deletions(-)
-
---- a/drivers/mtd/devices/bcm47xxsflash.c
-+++ b/drivers/mtd/devices/bcm47xxsflash.c
-@@ -337,22 +337,4 @@ static struct platform_driver bcma_sflas
- * Init
- **************************************************/
-
--static int __init bcm47xxsflash_init(void)
--{
-- int err;
--
-- err = platform_driver_register(&bcma_sflash_driver);
-- if (err)
-- pr_err("Failed to register BCMA serial flash driver: %d\n",
-- err);
--
-- return err;
--}
--
--static void __exit bcm47xxsflash_exit(void)
--{
-- platform_driver_unregister(&bcma_sflash_driver);
--}
--
--module_init(bcm47xxsflash_init);
--module_exit(bcm47xxsflash_exit);
-+module_platform_driver(bcma_sflash_driver);
diff --git a/target/linux/brcm47xx/patches-3.10/070-MIPS-BCM47XX-add-board-detection.patch b/target/linux/brcm47xx/patches-3.10/070-MIPS-BCM47XX-add-board-detection.patch
deleted file mode 100644
index ae519b6..0000000
--- a/target/linux/brcm47xx/patches-3.10/070-MIPS-BCM47XX-add-board-detection.patch
+++ /dev/null
@@ -1,469 +0,0 @@
-commit 74370cf83baefceb83f5f4b7ff5c8e19e7056632
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed Sep 18 13:29:57 2013 +0200
-
- MIPS: BCM47XX: Add board detection
-
- Detect on which board this code is running based on some nvram
- settings. This is needed to start board specific workarounds and
- configure the leds and buttons which are on different gpios on every board.
-
- This patches add some boards we have seen, but there are many more.
-
- Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
- Cc: linux-mips@linux-mips.org
- Patchwork: https://patchwork.linux-mips.org/patch/5840
- Patchwork: https://patchwork.linux-mips.org/patch/5855/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -4,4 +4,5 @@
- #
-
- obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-+obj-y += board.o
- obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/board.c
-@@ -0,0 +1,309 @@
-+#include <linux/export.h>
-+#include <linux/string.h>
-+#include <bcm47xx_board.h>
-+#include <bcm47xx_nvram.h>
-+
-+struct bcm47xx_board_type {
-+ const enum bcm47xx_board board;
-+ const char *name;
-+};
-+
-+struct bcm47xx_board_type_list1 {
-+ struct bcm47xx_board_type board;
-+ const char *value1;
-+};
-+
-+struct bcm47xx_board_type_list2 {
-+ struct bcm47xx_board_type board;
-+ const char *value1;
-+ const char *value2;
-+};
-+
-+struct bcm47xx_board_type_list3 {
-+ struct bcm47xx_board_type board;
-+ const char *value1;
-+ const char *value2;
-+ const char *value3;
-+};
-+
-+struct bcm47xx_board_store {
-+ enum bcm47xx_board board;
-+ char name[BCM47XX_BOARD_MAX_NAME];
-+};
-+
-+/* model_name */
-+static const
-+struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
-+ {{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
-+ {{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
-+ { {0}, 0},
-+};
-+
-+/* model_no */
-+static const
-+struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = {
-+ {{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"},
-+ { {0}, 0},
-+};
-+
-+/* machine_name */
-+static const
-+struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = {
-+ {{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"},
-+ { {0}, 0},
-+};
-+
-+/* hardware_version */
-+static const
-+struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
-+ {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
-+ {{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
-+ {{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
-+ {{BCM47XX_BOARD_ASUS_WL500GD, "Asus WL500GD"}, "WL500gd-"},
-+ {{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-"},
-+ {{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-"},
-+ {{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
-+ {{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
-+ {{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
-+ {{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
-+ { {0}, 0},
-+};
-+
-+/* productid */
-+static const
-+struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
-+ {{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
-+ {{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
-+ {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
-+ {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"},
-+ {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
-+ {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"},
-+ {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"},
-+ {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"},
-+ {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"},
-+ {{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
-+ {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
-+ {{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
-+ {{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
-+ {{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
-+ {{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
-+ { {0}, 0},
-+};
-+
-+/* ModelId */
-+static const
-+struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
-+ {{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"},
-+ {{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
-+ {{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
-+ {{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
-+ { {0}, 0},
-+};
-+
-+/* melco_id or buf1falo_id */
-+static const
-+struct bcm47xx_board_type_list1 bcm47xx_board_list_melco_id[] __initconst = {
-+ {{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332"},
-+ {{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd"},
-+ {{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093"},
-+ {{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182"},
-+ {{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189"},
-+ {{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129"},
-+ {{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
-+ {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
-+ {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
-+ { {0}, 0},
-+};
-+
-+/* boot_hw_model, boot_hw_ver */
-+static const
-+struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
-+ /* like WRT160N v3.0 */
-+ {{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"},
-+ /* like WRT310N v2.0 */
-+ {{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_E900V1, "Linksys E900 V1"}, "E900", "1.0"},
-+ /* like WRT160N v3.0 */
-+ {{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"},
-+ {{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"},
-+ {{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"},
-+ {{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
-+ /* like WRT610N v2.0 */
-+ {{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
-+ { {0}, 0},
-+};
-+
-+/* board_id */
-+static const
-+struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
-+ {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
-+ { {0}, 0},
-+};
-+
-+/* boardtype, boardnum, boardrev */
-+static const
-+struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
-+ {{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
-+ {{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
-+ {{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
-+ { {0}, 0},
-+};
-+
-+static const
-+struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
-+ {BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
-+};
-+
-+static struct bcm47xx_board_store bcm47xx_board = {BCM47XX_BOARD_NO, "Unknown Board"};
-+
-+static __init const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
-+{
-+ char buf1[30];
-+ char buf2[30];
-+ char buf3[30];
-+ const struct bcm47xx_board_type_list1 *e1;
-+ const struct bcm47xx_board_type_list2 *e2;
-+ const struct bcm47xx_board_type_list3 *e3;
-+
-+ if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) {
-+ for (e1 = bcm47xx_board_list_model_name; e1->value1; e1++) {
-+ if (!strcmp(buf1, e1->value1))
-+ return &e1->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("model_no", buf1, sizeof(buf1)) >= 0) {
-+ for (e1 = bcm47xx_board_list_model_no; e1->value1; e1++) {
-+ if (strstarts(buf1, e1->value1))
-+ return &e1->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("machine_name", buf1, sizeof(buf1)) >= 0) {
-+ for (e1 = bcm47xx_board_list_machine_name; e1->value1; e1++) {
-+ if (strstarts(buf1, e1->value1))
-+ return &e1->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) {
-+ for (e1 = bcm47xx_board_list_hardware_version; e1->value1; e1++) {
-+ if (strstarts(buf1, e1->value1))
-+ return &e1->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
-+ for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
-+ if (!strcmp(buf1, e1->value1))
-+ return &e1->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) {
-+ for (e1 = bcm47xx_board_list_ModelId; e1->value1; e1++) {
-+ if (!strcmp(buf1, e1->value1))
-+ return &e1->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 ||
-+ bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) {
-+ /* buffalo hardware, check id for specific hardware matches */
-+ for (e1 = bcm47xx_board_list_melco_id; e1->value1; e1++) {
-+ if (!strcmp(buf1, e1->value1))
-+ return &e1->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 &&
-+ bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) {
-+ for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
-+ if (!strcmp(buf1, e2->value1) &&
-+ !strcmp(buf2, e2->value2))
-+ return &e2->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) {
-+ for (e1 = bcm47xx_board_list_board_id; e1->value1; e1++) {
-+ if (!strcmp(buf1, e1->value1))
-+ return &e1->board;
-+ }
-+ }
-+
-+ if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
-+ bcm47xx_nvram_getenv("boardnum", buf2, sizeof(buf2)) >= 0 &&
-+ bcm47xx_nvram_getenv("boardrev", buf3, sizeof(buf3)) >= 0) {
-+ for (e3 = bcm47xx_board_list_board; e3->value1; e3++) {
-+ if (!strcmp(buf1, e3->value1) &&
-+ !strcmp(buf2, e3->value2) &&
-+ !strcmp(buf3, e3->value3))
-+ return &e3->board;
-+ }
-+ }
-+ return bcm47xx_board_unknown;
-+}
-+
-+void __init bcm47xx_board_detect(void)
-+{
-+ int err;
-+ char buf[10];
-+ const struct bcm47xx_board_type *board_detected;
-+
-+ if (bcm47xx_board.board != BCM47XX_BOARD_NO)
-+ return;
-+
-+ /* check if the nvram is available */
-+ err = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf));
-+
-+ /* init of nvram failed, probably too early now */
-+ if (err == -ENXIO) {
-+ return;
-+ }
-+
-+ board_detected = bcm47xx_board_get_nvram();
-+ bcm47xx_board.board = board_detected->board;
-+ strlcpy(bcm47xx_board.name, board_detected->name,
-+ BCM47XX_BOARD_MAX_NAME);
-+}
-+
-+enum bcm47xx_board bcm47xx_board_get(void)
-+{
-+ return bcm47xx_board.board;
-+}
-+EXPORT_SYMBOL(bcm47xx_board_get);
-+
-+const char *bcm47xx_board_get_name(void)
-+{
-+ return bcm47xx_board.name;
-+}
-+EXPORT_SYMBOL(bcm47xx_board_get_name);
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -36,6 +36,7 @@
- #include <asm/time.h>
- #include <bcm47xx.h>
- #include <bcm47xx_nvram.h>
-+#include <bcm47xx_board.h>
-
- union bcm47xx_bus bcm47xx_bus;
- EXPORT_SYMBOL(bcm47xx_bus);
-@@ -221,6 +222,7 @@ void __init plat_mem_setup(void)
- _machine_restart = bcm47xx_machine_restart;
- _machine_halt = bcm47xx_machine_halt;
- pm_power_off = bcm47xx_machine_halt;
-+ bcm47xx_board_detect();
- }
-
- static int __init bcm47xx_register_bus_complete(void)
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -0,0 +1,110 @@
-+#ifndef __BCM47XX_BOARD_H
-+#define __BCM47XX_BOARD_H
-+
-+enum bcm47xx_board {
-+ BCM47XX_BOARD_ASUS_RTAC66U,
-+ BCM47XX_BOARD_ASUS_RTN10,
-+ BCM47XX_BOARD_ASUS_RTN10D,
-+ BCM47XX_BOARD_ASUS_RTN10U,
-+ BCM47XX_BOARD_ASUS_RTN12,
-+ BCM47XX_BOARD_ASUS_RTN12B1,
-+ BCM47XX_BOARD_ASUS_RTN12C1,
-+ BCM47XX_BOARD_ASUS_RTN12D1,
-+ BCM47XX_BOARD_ASUS_RTN12HP,
-+ BCM47XX_BOARD_ASUS_RTN15U,
-+ BCM47XX_BOARD_ASUS_RTN16,
-+ BCM47XX_BOARD_ASUS_RTN53,
-+ BCM47XX_BOARD_ASUS_RTN66U,
-+ BCM47XX_BOARD_ASUS_WL300G,
-+ BCM47XX_BOARD_ASUS_WL320GE,
-+ BCM47XX_BOARD_ASUS_WL330GE,
-+ BCM47XX_BOARD_ASUS_WL500GD,
-+ BCM47XX_BOARD_ASUS_WL500GPV1,
-+ BCM47XX_BOARD_ASUS_WL500GPV2,
-+ BCM47XX_BOARD_ASUS_WL500W,
-+ BCM47XX_BOARD_ASUS_WL520GC,
-+ BCM47XX_BOARD_ASUS_WL520GU,
-+ BCM47XX_BOARD_ASUS_WL700GE,
-+ BCM47XX_BOARD_ASUS_WLHDD,
-+
-+ BCM47XX_BOARD_BELKIN_F7D4301,
-+
-+ BCM47XX_BOARD_BUFFALO_WBR2_G54,
-+ BCM47XX_BOARD_BUFFALO_WHR2_A54G54,
-+ BCM47XX_BOARD_BUFFALO_WHR_G125,
-+ BCM47XX_BOARD_BUFFALO_WHR_G54S,
-+ BCM47XX_BOARD_BUFFALO_WHR_HP_G54,
-+ BCM47XX_BOARD_BUFFALO_WLA2_G54L,
-+ BCM47XX_BOARD_BUFFALO_WZR_G300N,
-+ BCM47XX_BOARD_BUFFALO_WZR_RS_G54,
-+ BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP,
-+
-+ BCM47XX_BOARD_CISCO_M10V1,
-+ BCM47XX_BOARD_CISCO_M20V1,
-+
-+ BCM47XX_BOARD_DELL_TM2300,
-+
-+ BCM47XX_BOARD_DLINK_DIR130,
-+ BCM47XX_BOARD_DLINK_DIR330,
-+
-+ BCM47XX_BOARD_HUAWEI_E970,
-+
-+ BCM47XX_BOARD_LINKSYS_E900V1,
-+ BCM47XX_BOARD_LINKSYS_E1000V1,
-+ BCM47XX_BOARD_LINKSYS_E1000V2,
-+ BCM47XX_BOARD_LINKSYS_E1000V21,
-+ BCM47XX_BOARD_LINKSYS_E1200V2,
-+ BCM47XX_BOARD_LINKSYS_E2000V1,
-+ BCM47XX_BOARD_LINKSYS_E3000V1,
-+ BCM47XX_BOARD_LINKSYS_E3200V1,
-+ BCM47XX_BOARD_LINKSYS_E4200V1,
-+ BCM47XX_BOARD_LINKSYS_WRT150NV1,
-+ BCM47XX_BOARD_LINKSYS_WRT150NV11,
-+ BCM47XX_BOARD_LINKSYS_WRT160NV1,
-+ BCM47XX_BOARD_LINKSYS_WRT160NV3,
-+ BCM47XX_BOARD_LINKSYS_WRT300NV11,
-+ BCM47XX_BOARD_LINKSYS_WRT310NV1,
-+ BCM47XX_BOARD_LINKSYS_WRT310NV2,
-+ BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
-+ BCM47XX_BOARD_LINKSYS_WRT610NV1,
-+ BCM47XX_BOARD_LINKSYS_WRT610NV2,
-+ BCM47XX_BOARD_LINKSYS_WRTSL54GS,
-+
-+ BCM47XX_BOARD_MOTOROLA_WE800G,
-+ BCM47XX_BOARD_MOTOROLA_WR850GP,
-+ BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
-+
-+ BCM47XX_BOARD_NETGEAR_WGR614V8,
-+ BCM47XX_BOARD_NETGEAR_WGR614V9,
-+ BCM47XX_BOARD_NETGEAR_WNDR3300,
-+ BCM47XX_BOARD_NETGEAR_WNDR3400V1,
-+ BCM47XX_BOARD_NETGEAR_WNDR3400V2,
-+ BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
-+ BCM47XX_BOARD_NETGEAR_WNDR3700V3,
-+ BCM47XX_BOARD_NETGEAR_WNDR4000,
-+ BCM47XX_BOARD_NETGEAR_WNDR4500V1,
-+ BCM47XX_BOARD_NETGEAR_WNDR4500V2,
-+ BCM47XX_BOARD_NETGEAR_WNR2000,
-+ BCM47XX_BOARD_NETGEAR_WNR3500L,
-+ BCM47XX_BOARD_NETGEAR_WNR3500U,
-+ BCM47XX_BOARD_NETGEAR_WNR3500V2,
-+ BCM47XX_BOARD_NETGEAR_WNR3500V2VC,
-+ BCM47XX_BOARD_NETGEAR_WNR834BV2,
-+
-+ BCM47XX_BOARD_PHICOMM_M1,
-+
-+ BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
-+
-+ BCM47XX_BOARD_ZTE_H218N,
-+
-+ BCM47XX_BOARD_UNKNOWN,
-+ BCM47XX_BOARD_NO,
-+};
-+
-+#define BCM47XX_BOARD_MAX_NAME 30
-+
-+void bcm47xx_board_detect(void);
-+enum bcm47xx_board bcm47xx_board_get(void);
-+const char *bcm47xx_board_get_name(void);
-+
-+#endif /* __BCM47XX_BOARD_H */
diff --git a/target/linux/brcm47xx/patches-3.10/071-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch b/target/linux/brcm47xx/patches-3.10/071-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch
deleted file mode 100644
index c746279..0000000
--- a/target/linux/brcm47xx/patches-3.10/071-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-commit 7ad3b82f9d80ef8919dcfdfe7561e1a83e09c6bd
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed Sep 18 13:29:58 2013 +0200
-
- MIPS: BCM47XX: Print board name in /proc/cpuinfo
-
- Do not print the constant system type "Broadcom BCM47XX" but print the
- name of the actual SoC in use and the detected board.
-
- Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
- Cc: linux-mips@linux-mips.org
- Patchwork: https://patchwork.linux-mips.org/patch/5839/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -32,12 +32,37 @@
- #include <asm/bootinfo.h>
- #include <asm/fw/cfe/cfe_api.h>
- #include <asm/fw/cfe/cfe_error.h>
-+#include <bcm47xx.h>
-+#include <bcm47xx_board.h>
-
- static int cfe_cons_handle;
-
-+static u16 get_chip_id(void)
-+{
-+ switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+ case BCM47XX_BUS_TYPE_SSB:
-+ return bcm47xx_bus.ssb.chip_id;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ return bcm47xx_bus.bcma.bus.chipinfo.id;
-+#endif
-+ }
-+ return 0;
-+}
-+
- const char *get_system_type(void)
- {
-- return "Broadcom BCM47XX";
-+ static char buf[50];
-+ u16 chip_id = get_chip_id();
-+
-+ snprintf(buf, sizeof(buf),
-+ (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
-+ "Broadcom BCM%04X (%s)",
-+ chip_id, bcm47xx_board_get_name());
-+
-+ return buf;
- }
-
- void prom_putchar(char c)
diff --git a/target/linux/brcm47xx/patches-3.10/072-MIPS-BCM47XX-only-print-SoC-name-in-system-type-in-c.patch b/target/linux/brcm47xx/patches-3.10/072-MIPS-BCM47XX-only-print-SoC-name-in-system-type-in-c.patch
deleted file mode 100644
index 4dcd380..0000000
--- a/target/linux/brcm47xx/patches-3.10/072-MIPS-BCM47XX-only-print-SoC-name-in-system-type-in-c.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 17e0ca5d6e08a83eed8dada75af4c0107f162051 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 19 Sep 2013 23:40:09 +0200
-Subject: [PATCH 018/110] MIPS: BCM47XX: only print SoC name in system type in
- cpuinfo
-
-Recently the output of "system type" in /proc/cpuinfo was changed to
-Broadcom BCM4730 (Some sample board), but it is better to just print
-the SoC name in the "system type" entry. The board name will be added
-in the machine entry later.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/5865/
----
- arch/mips/bcm47xx/prom.c | 31 ++++++++------------------
- arch/mips/bcm47xx/setup.c | 2 ++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 2 ++
- 3 files changed, 13 insertions(+), 22 deletions(-)
-
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -37,32 +37,19 @@
-
- static int cfe_cons_handle;
-
--static u16 get_chip_id(void)
--{
-- switch (bcm47xx_bus_type) {
--#ifdef CONFIG_BCM47XX_SSB
-- case BCM47XX_BUS_TYPE_SSB:
-- return bcm47xx_bus.ssb.chip_id;
--#endif
--#ifdef CONFIG_BCM47XX_BCMA
-- case BCM47XX_BUS_TYPE_BCMA:
-- return bcm47xx_bus.bcma.bus.chipinfo.id;
--#endif
-- }
-- return 0;
--}
-+static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
-
- const char *get_system_type(void)
- {
-- static char buf[50];
-- u16 chip_id = get_chip_id();
--
-- snprintf(buf, sizeof(buf),
-- (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
-- "Broadcom BCM%04X (%s)",
-- chip_id, bcm47xx_board_get_name());
-+ return bcm47xx_system_type;
-+}
-
-- return buf;
-+__init void bcm47xx_set_system_type(u16 chip_id)
-+{
-+ snprintf(bcm47xx_system_type, sizeof(bcm47xx_system_type),
-+ (chip_id > 0x9999) ? "Broadcom BCM%d" :
-+ "Broadcom BCM%04X",
-+ chip_id);
- }
-
- void prom_putchar(char c)
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -210,12 +210,14 @@ void __init plat_mem_setup(void)
- #ifdef CONFIG_BCM47XX_BCMA
- bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
- bcm47xx_register_bcma();
-+ bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
- #endif
- } else {
- printk(KERN_INFO "bcm47xx: using ssb bus\n");
- #ifdef CONFIG_BCM47XX_SSB
- bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
- bcm47xx_register_ssb();
-+ bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
- #endif
- }
-
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-@@ -56,4 +56,6 @@ void bcm47xx_fill_bcma_boardinfo(struct
- const char *prefix);
- #endif
-
-+void bcm47xx_set_system_type(u16 chip_id);
-+
- #endif /* __ASM_BCM47XX_H */
diff --git a/target/linux/brcm47xx/patches-3.10/073-MIPS-BCM47XX-print-board-name-in-machine-entry-in-cp.patch b/target/linux/brcm47xx/patches-3.10/073-MIPS-BCM47XX-print-board-name-in-machine-entry-in-cp.patch
deleted file mode 100644
index 8a78642..0000000
--- a/target/linux/brcm47xx/patches-3.10/073-MIPS-BCM47XX-print-board-name-in-machine-entry-in-cp.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 6d683038f2155bf0d6f486a1f11a10bbc455da8a Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 19 Sep 2013 23:40:10 +0200
-Subject: [PATCH 019/110] MIPS: BCM47XX: print board name in machine entry in
- cpuinfo
-
-This will add the board name to the machine entry in /proc/cpuinfo.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/5864/
----
- arch/mips/bcm47xx/setup.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -32,6 +32,7 @@
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
- #include <asm/bootinfo.h>
-+#include <asm/prom.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
- #include <bcm47xx.h>
-@@ -225,6 +226,7 @@ void __init plat_mem_setup(void)
- _machine_halt = bcm47xx_machine_halt;
- pm_power_off = bcm47xx_machine_halt;
- bcm47xx_board_detect();
-+ mips_set_machine_name(bcm47xx_board_get_name());
- }
-
- static int __init bcm47xx_register_bus_complete(void)
diff --git a/target/linux/brcm47xx/patches-3.10/075-MIPS-BCM47XX-fix-detection-for-some-boards.patch b/target/linux/brcm47xx/patches-3.10/075-MIPS-BCM47XX-fix-detection-for-some-boards.patch
deleted file mode 100644
index cfa45bc..0000000
--- a/target/linux/brcm47xx/patches-3.10/075-MIPS-BCM47XX-fix-detection-for-some-boards.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 255842a25bf36b7ba585e6cf81d856fa9df66cf2 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 3 Jan 2014 20:41:58 +0100
-Subject: [PATCH] MIPS: BCM47XX: fix detection for some boards
-
-When a nvram reset was performed from CFE, it sometimes does not
-contain the productid value in nvram, but it still contains
-hardware_version.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
----
- arch/mips/bcm47xx/board.c | 13 +++++++------
- 1 file changed, 7 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -56,6 +56,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
- /* hardware_version */
- static const
- struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
-+ {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
-+ {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
-+ {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
-+ {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
-+ {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RTN12D1"},
-+ {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RTN12HP"},
- {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
- {{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
- {{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
-@@ -75,12 +81,6 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
- {{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
- {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
-- {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"},
-- {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
-- {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"},
-- {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"},
-- {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"},
-- {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"},
- {{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
- {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
- {{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
-@@ -174,6 +174,7 @@ struct bcm47xx_board_type_list3 bcm47xx_
- {{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
- {{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
- {{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
- { {0}, 0},
- };
-
diff --git a/target/linux/brcm47xx/patches-3.10/076-MIPS-BCM47XX-add-board-detection-for-Linksys-WRT54GS.patch b/target/linux/brcm47xx/patches-3.10/076-MIPS-BCM47XX-add-board-detection-for-Linksys-WRT54GS.patch
deleted file mode 100644
index 098cf11..0000000
--- a/target/linux/brcm47xx/patches-3.10/076-MIPS-BCM47XX-add-board-detection-for-Linksys-WRT54GS.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From a2da7b7a2cb8319b6383e93d99905cb027252584 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 3 Jan 2014 20:41:59 +0100
-Subject: [PATCH] MIPS: BCM47XX: add board detection for Linksys WRT54GS V1
-
-This adds board detection for Linksys WRT54GS V1.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
----
- arch/mips/bcm47xx/board.c | 1 +
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -175,6 +175,7 @@ struct bcm47xx_board_type_list3 bcm47xx_
- {{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
- {{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
- {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
- { {0}, 0},
- };
-
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -66,6 +66,7 @@ enum bcm47xx_board {
- BCM47XX_BOARD_LINKSYS_WRT310NV1,
- BCM47XX_BOARD_LINKSYS_WRT310NV2,
- BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
-+ BCM47XX_BOARD_LINKSYS_WRT54GSV1,
- BCM47XX_BOARD_LINKSYS_WRT610NV1,
- BCM47XX_BOARD_LINKSYS_WRT610NV2,
- BCM47XX_BOARD_LINKSYS_WRTSL54GS,
diff --git a/target/linux/brcm47xx/patches-3.10/077-MIPS-BCM47XX-fix-sparse-warnings-in-board.c.patch b/target/linux/brcm47xx/patches-3.10/077-MIPS-BCM47XX-fix-sparse-warnings-in-board.c.patch
deleted file mode 100644
index b7ce90a..0000000
--- a/target/linux/brcm47xx/patches-3.10/077-MIPS-BCM47XX-fix-sparse-warnings-in-board.c.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From ab76ce5c01293f518db823c7089d52586fc1d899 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 3 Jan 2014 20:42:00 +0100
-Subject: [PATCH] MIPS: BCM47XX: fix sparse warnings in board.c
-
-This fixes the following sparse warnings:
-arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer
-arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
----
- arch/mips/bcm47xx/board.c | 20 ++++++++++----------
- 1 file changed, 10 insertions(+), 10 deletions(-)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -36,21 +36,21 @@ static const
- struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
- {{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
- {{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* model_no */
- static const
- struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = {
- {{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* machine_name */
- static const
- struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = {
- {{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* hardware_version */
-@@ -72,7 +72,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
- {{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
- {{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* productid */
-@@ -87,7 +87,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
- {{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
- {{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* ModelId */
-@@ -97,7 +97,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
- {{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
- {{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* melco_id or buf1falo_id */
-@@ -112,7 +112,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
- {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
- {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* boot_hw_model, boot_hw_ver */
-@@ -143,7 +143,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
- {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* board_id */
-@@ -165,7 +165,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- /* boardtype, boardnum, boardrev */
-@@ -176,7 +176,7 @@ struct bcm47xx_board_type_list3 bcm47xx_
- {{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
- {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
- {{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
-- { {0}, 0},
-+ { {0}, NULL},
- };
-
- static const
diff --git a/target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch b/target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch
deleted file mode 100644
index bfbe43b..0000000
--- a/target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-commit 0a76092a63809a0e72e3e9552acadf42869c0293
-Author: Yoichi Yuasa <yuasa@linux-mips.org>
-Date: Mon Feb 8 20:59:39 2010 +0900
-
- MIPS: Add 8250/16550 serial early printk driver
-
- Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
- Cc: linux-mips <linux-mips@linux-mips.org>
- Patchwork: https://patchwork.linux-mips.org/patch/947/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/Kconfig.debug
-+++ b/arch/mips/Kconfig.debug
-@@ -20,6 +20,14 @@ config EARLY_PRINTK
- doesn't cooperate with an X server. You should normally say N here,
- unless you want to debug such a crash.
-
-+config EARLY_PRINTK_8250
-+ bool "8250/16550 and compatible serial early printk driver"
-+ depends on EARLY_PRINTK
-+ default n
-+ help
-+ If you say Y here, it will be possible to use a 8250/16550 serial
-+ port as the boot console.
-+
- config CMDLINE_BOOL
- bool "Built-in kernel command line"
- default n
---- a/arch/mips/include/asm/setup.h
-+++ b/arch/mips/include/asm/setup.h
-@@ -5,6 +5,14 @@
-
- extern void setup_early_printk(void);
-
-+#ifdef CONFIG_EARLY_PRINTK_8250
-+extern void setup_8250_early_printk_port(unsigned long base,
-+ unsigned int reg_shift, unsigned int timeout);
-+#else
-+static inline void setup_8250_early_printk_port(unsigned long base,
-+ unsigned int reg_shift, unsigned int timeout) {}
-+#endif
-+
- extern void set_handler(unsigned long offset, void *addr, unsigned long len);
- extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
-
---- a/arch/mips/kernel/Makefile
-+++ b/arch/mips/kernel/Makefile
-@@ -84,6 +84,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
- obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
- obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+obj-$(CONFIG_EARLY_PRINTK_8250) += early_printk_8250.o
- obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o
- obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
-
---- /dev/null
-+++ b/arch/mips/kernel/early_printk_8250.c
-@@ -0,0 +1,66 @@
-+/*
-+ * 8250/16550-type serial ports prom_putchar()
-+ *
-+ * Copyright (C) 2010 Yoichi Yuasa <yuasa@linux-mips.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-+ */
-+#include <linux/io.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_reg.h>
-+
-+static void __iomem *serial8250_base;
-+static unsigned int serial8250_reg_shift;
-+static unsigned int serial8250_tx_timeout;
-+
-+void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift,
-+ unsigned int timeout)
-+{
-+ serial8250_base = (void __iomem *)base;
-+ serial8250_reg_shift = reg_shift;
-+ serial8250_tx_timeout = timeout;
-+}
-+
-+static inline u8 serial_in(int offset)
-+{
-+ return readb(serial8250_base + (offset << serial8250_reg_shift));
-+}
-+
-+static inline void serial_out(int offset, char value)
-+{
-+ writeb(value, serial8250_base + (offset << serial8250_reg_shift));
-+}
-+
-+void prom_putchar(char c)
-+{
-+ unsigned int timeout;
-+ int status, bits;
-+
-+ if (!serial8250_base)
-+ return;
-+
-+ timeout = serial8250_tx_timeout;
-+ bits = UART_LSR_TEMT | UART_LSR_THRE;
-+
-+ do {
-+ status = serial_in(UART_LSR);
-+
-+ if (--timeout == 0)
-+ break;
-+ } while ((status & bits) != bits);
-+
-+ if (timeout)
-+ serial_out(UART_TX, c);
-+}
diff --git a/target/linux/brcm47xx/patches-3.10/081-MIPS-BCM47XX-Remove-CFE-support.patch b/target/linux/brcm47xx/patches-3.10/081-MIPS-BCM47XX-Remove-CFE-support.patch
deleted file mode 100644
index 1537db5..0000000
--- a/target/linux/brcm47xx/patches-3.10/081-MIPS-BCM47XX-Remove-CFE-support.patch
+++ /dev/null
@@ -1,151 +0,0 @@
-commit 808fe9c2fa81a6b3e20fe813d5410e7fd6606efa
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun Jul 18 15:11:26 2010 +0200
-
- MIPS: BCM47XX: Remove CFE support
-
- bcm47xx only uses the CFE code for early print to a console, but that
- is also possible with a early print serial 8250 driver.
-
- The CFE api init causes hangs somewhere in prom_init_cfe() on some
- devices like the Buffalo WHR-HP-G54 and the Asus WL-520GU.
- This was reported in https://dev.openwrt.org/ticket/4061 and
- https://forum.openwrt.org/viewtopic.php?id=17063
-
- This will remove all the CFE handling code from bcm47xx.
-
- Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -112,13 +112,11 @@ config BCM47XX
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
-- select FW_CFE
- select HW_HAS_PCI
- select IRQ_CPU
- select NO_EXCEPT_FILL
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
-- select SYS_HAS_EARLY_PRINTK
- help
- Support for BCM47XX based boards
-
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -30,12 +30,9 @@
- #include <linux/spinlock.h>
- #include <linux/smp.h>
- #include <asm/bootinfo.h>
--#include <asm/fw/cfe/cfe_api.h>
--#include <asm/fw/cfe/cfe_error.h>
- #include <bcm47xx.h>
- #include <bcm47xx_board.h>
-
--static int cfe_cons_handle;
-
- static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
-
-@@ -52,91 +49,6 @@ __init void bcm47xx_set_system_type(u16
- chip_id);
- }
-
--void prom_putchar(char c)
--{
-- while (cfe_write(cfe_cons_handle, &c, 1) == 0)
-- ;
--}
--
--static __init void prom_init_cfe(void)
--{
-- uint32_t cfe_ept;
-- uint32_t cfe_handle;
-- uint32_t cfe_eptseal;
-- int argc = fw_arg0;
-- char **envp = (char **) fw_arg2;
-- int *prom_vec = (int *) fw_arg3;
--
-- /*
-- * Check if a loader was used; if NOT, the 4 arguments are
-- * what CFE gives us (handle, 0, EPT and EPTSEAL)
-- */
-- if (argc < 0) {
-- cfe_handle = (uint32_t)argc;
-- cfe_ept = (uint32_t)envp;
-- cfe_eptseal = (uint32_t)prom_vec;
-- } else {
-- if ((int)prom_vec < 0) {
-- /*
-- * Old loader; all it gives us is the handle,
-- * so use the "known" entrypoint and assume
-- * the seal.
-- */
-- cfe_handle = (uint32_t)prom_vec;
-- cfe_ept = 0xBFC00500;
-- cfe_eptseal = CFE_EPTSEAL;
-- } else {
-- /*
-- * Newer loaders bundle the handle/ept/eptseal
-- * Note: prom_vec is in the loader's useg
-- * which is still alive in the TLB.
-- */
-- cfe_handle = prom_vec[0];
-- cfe_ept = prom_vec[2];
-- cfe_eptseal = prom_vec[3];
-- }
-- }
--
-- if (cfe_eptseal != CFE_EPTSEAL) {
-- /* too early for panic to do any good */
-- printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
-- while (1) ;
-- }
--
-- cfe_init(cfe_handle, cfe_ept);
--}
--
--static __init void prom_init_console(void)
--{
-- /* Initialize CFE console */
-- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
--}
--
--static __init void prom_init_cmdline(void)
--{
-- static char buf[COMMAND_LINE_SIZE] __initdata;
--
-- /* Get the kernel command line from CFE */
-- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
-- buf[COMMAND_LINE_SIZE - 1] = 0;
-- strcpy(arcs_cmdline, buf);
-- }
--
-- /* Force a console handover by adding a console= argument if needed,
-- * as CFE is not available anymore later in the boot process. */
-- if ((strstr(arcs_cmdline, "console=")) == NULL) {
-- /* Try to read the default serial port used by CFE */
-- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
-- || (strncmp("uart", buf, 4)))
-- /* Default to uart0 */
-- strcpy(buf, "uart0");
--
-- /* Compute the new command line */
-- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
-- arcs_cmdline, buf[4]);
-- }
--}
--
- static __init void prom_init_mem(void)
- {
- unsigned long mem;
-@@ -184,9 +96,6 @@ static __init void prom_init_mem(void)
-
- void __init prom_init(void)
- {
-- prom_init_cfe();
-- prom_init_console();
-- prom_init_cmdline();
- prom_init_mem();
- }
-
diff --git a/target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch b/target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch
deleted file mode 100644
index 744e359..0000000
--- a/target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-commit 22250a38f970c173acb1b3fb30e6dce1430f697b
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu Sep 19 22:48:35 2013 +0200
-
- MIPS: BCM47XX: add EARLY_PRINTK_8250 support
-
- The BCM47xx SoCs have a 8250 serial compatible console at address
- 0x18000300 and an other at 0x18000400. On most devices 0x18000300 is
- wired to some pins on the board, we should use that.
- This is the smae for the AI (bcma) and the SB (ssb) bus, this is some
- offset on the chip common core.
-
- Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -117,6 +117,8 @@ config BCM47XX
- select NO_EXCEPT_FILL
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_HAS_EARLY_PRINTK
-+ select EARLY_PRINTK_8250 if EARLY_PRINTK
- help
- Support for BCM47XX based boards
-
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -28,6 +28,8 @@
- #include <linux/types.h>
- #include <linux/kernel.h>
- #include <linux/spinlock.h>
-+#include <linux/ssb/ssb_driver_chipcommon.h>
-+#include <linux/ssb/ssb_regs.h>
- #include <linux/smp.h>
- #include <asm/bootinfo.h>
- #include <bcm47xx.h>
-@@ -94,9 +96,16 @@ static __init void prom_init_mem(void)
- add_memory_region(0, mem, BOOT_MEM_RAM);
- }
-
-+/*
-+ * This is the first serial on the chip common core, it is at this position
-+ * for sb (ssb) and ai (bcma) bus.
-+ */
-+#define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA)
-+
- void __init prom_init(void)
- {
- prom_init_mem();
-+ setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0);
- }
-
- void __init prom_free_prom_memory(void)
diff --git a/target/linux/brcm47xx/patches-3.10/085-MIPS-BCM47XX-Get-GPIO-pin-from-nvram-configuration.patch b/target/linux/brcm47xx/patches-3.10/085-MIPS-BCM47XX-Get-GPIO-pin-from-nvram-configuration.patch
deleted file mode 100644
index a0f91a4..0000000
--- a/target/linux/brcm47xx/patches-3.10/085-MIPS-BCM47XX-Get-GPIO-pin-from-nvram-configuration.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-commit e49ec29e2da1fd7cdd6d966f389add031a1027a9
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed Sep 18 13:31:15 2013 +0200
-
- MIPS: BCM47XX: Get GPIO pin from nvram configuration
-
- The nvram contains some gpio configuration for boards. It is stored in
- a gpio<number>=name format e.g.
- gpio8=wps_button
- gpio4=robo_reset
-
- This patches adds a function to parse these entries, so other driver
- can use it.
-
- Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
- Cc: linux-mips@linux-mips.org
- Patchwork: https://patchwork.linux-mips.org/patch/5841/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -190,3 +190,23 @@ int bcm47xx_nvram_getenv(char *name, cha
- return -ENOENT;
- }
- EXPORT_SYMBOL(bcm47xx_nvram_getenv);
-+
-+int bcm47xx_nvram_gpio_pin(const char *name)
-+{
-+ int i, err;
-+ char nvram_var[10];
-+ char buf[30];
-+
-+ for (i = 0; i < 16; i++) {
-+ err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
-+ if (err <= 0)
-+ continue;
-+ err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
-+ if (err <= 0)
-+ continue;
-+ if (!strcmp(name, buf))
-+ return i;
-+ }
-+ return -ENOENT;
-+}
-+EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
-@@ -48,4 +48,6 @@ static inline void bcm47xx_nvram_parse_m
- printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
- }
-
-+int bcm47xx_nvram_gpio_pin(const char *name);
-+
- #endif /* __BCM47XX_NVRAM_H */
diff --git a/target/linux/brcm47xx/patches-3.10/090-MIPS-BCM47XX-fix-clock-detection-for-BCM5354-with-20.patch b/target/linux/brcm47xx/patches-3.10/090-MIPS-BCM47XX-fix-clock-detection-for-BCM5354-with-20.patch
deleted file mode 100644
index ec59534..0000000
--- a/target/linux/brcm47xx/patches-3.10/090-MIPS-BCM47XX-fix-clock-detection-for-BCM5354-with-20.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-commit 0388a0410d590a6c239c1cfaa7d49bffd4ed1101
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed Sep 18 13:32:59 2013 +0200
-
- MIPS: BCM47XX: Fix clock detection for BCM5354 with 200MHz clock
-
- Some BCM5354 SoCs are running at 200MHz, but it is not possible to read
- the clock from a register like it is done on some other SoC in ssb and
- bcma. These devices should have a clkfreq nvram configuration value set
- to 200, read it and set the clock to the correct value.
-
- Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
- Cc: linux-mips@linux-mips.org
- Patchwork: https://patchwork.linux-mips.org/patch/5842/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -27,10 +27,14 @@
- #include <linux/ssb/ssb.h>
- #include <asm/time.h>
- #include <bcm47xx.h>
-+#include <bcm47xx_nvram.h>
-
- void __init plat_time_init(void)
- {
- unsigned long hz = 0;
-+ u16 chip_id = 0;
-+ char buf[10];
-+ int len;
-
- /*
- * Use deterministic values for initial counter interrupt
-@@ -43,15 +47,23 @@ void __init plat_time_init(void)
- #ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
-+ chip_id = bcm47xx_bus.ssb.chip_id;
- break;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
-+ chip_id = bcm47xx_bus.bcma.bus.chipinfo.id;
- break;
- #endif
- }
-
-+ if (chip_id == 0x5354) {
-+ len = bcm47xx_nvram_getenv("clkfreq", buf, sizeof(buf));
-+ if (len >= 0 && !strncmp(buf, "200", 4))
-+ hz = 100000000;
-+ }
-+
- if (!hz)
- hz = 100000000;
-
diff --git a/target/linux/brcm47xx/patches-3.10/091-MIPS-BCM47XX-fix-detected-clock-on-Asus-WL520GC-and-.patch b/target/linux/brcm47xx/patches-3.10/091-MIPS-BCM47XX-fix-detected-clock-on-Asus-WL520GC-and-.patch
deleted file mode 100644
index 460c0e4..0000000
--- a/target/linux/brcm47xx/patches-3.10/091-MIPS-BCM47XX-fix-detected-clock-on-Asus-WL520GC-and-.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-commit 935e93fcc022ff7be7046d2435ce6441e260abfb
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed Sep 18 13:33:00 2013 +0200
-
- MIPS: BCM47XX: Fix detected clock on Asus WL520GC and WL520GU
-
- The Asus WL520GC and WL520GU are based on the BCM5354 and clocked at
- 200MHz, but they do not have a clkfreq nvram variable set to the
- correct value. This adds a workaround for these devices.
-
- Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
- Cc: linux-mips@linux-mips.org
- Patchwork: https://patchwork.linux-mips.org/patch/5843/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -28,6 +28,7 @@
- #include <asm/time.h>
- #include <bcm47xx.h>
- #include <bcm47xx_nvram.h>
-+#include <bcm47xx_board.h>
-
- void __init plat_time_init(void)
- {
-@@ -35,6 +36,7 @@ void __init plat_time_init(void)
- u16 chip_id = 0;
- char buf[10];
- int len;
-+ enum bcm47xx_board board = bcm47xx_board_get();
-
- /*
- * Use deterministic values for initial counter interrupt
-@@ -64,6 +66,15 @@ void __init plat_time_init(void)
- hz = 100000000;
- }
-
-+ switch (board) {
-+ case BCM47XX_BOARD_ASUS_WL520GC:
-+ case BCM47XX_BOARD_ASUS_WL520GU:
-+ hz = 100000000;
-+ break;
-+ default:
-+ break;
-+ }
-+
- if (!hz)
- hz = 100000000;
-
diff --git a/target/linux/brcm47xx/patches-3.10/095-MIPS-BCM47XX-Fix-some-very-confused-types-and-data-c.patch b/target/linux/brcm47xx/patches-3.10/095-MIPS-BCM47XX-Fix-some-very-confused-types-and-data-c.patch
deleted file mode 100644
index 038e6a0..0000000
--- a/target/linux/brcm47xx/patches-3.10/095-MIPS-BCM47XX-Fix-some-very-confused-types-and-data-c.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 855094d7e46eb14c597ca09631cf95a92909982d Mon Sep 17 00:00:00 2001
-From: Ilia Mirkin <imirkin@alum.mit.edu>
-Date: Fri, 6 Dec 2013 18:56:53 -0500
-Subject: [PATCH] MIPS: BCM47XX: Fix some very confused types and data
- corruption
-
-Fix nvram_read_alpha2 copying too many bytes over the ssb_sprom
-structure. Also fix the arguments of the read_macaddr, although the code
-was technically not wrong before due to an extra dereference.
-
-Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/6211/
----
- arch/mips/bcm47xx/sprom.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm47xx/sprom.c
-+++ b/arch/mips/bcm47xx/sprom.c
-@@ -135,7 +135,7 @@ static void nvram_read_leddc(const char
- }
-
- static void nvram_read_macaddr(const char *prefix, const char *name,
-- u8 (*val)[6], bool fallback)
-+ u8 val[6], bool fallback)
- {
- char buf[100];
- int err;
-@@ -144,11 +144,11 @@ static void nvram_read_macaddr(const cha
- if (err < 0)
- return;
-
-- bcm47xx_nvram_parse_macaddr(buf, *val);
-+ bcm47xx_nvram_parse_macaddr(buf, val);
- }
-
- static void nvram_read_alpha2(const char *prefix, const char *name,
-- char (*val)[2], bool fallback)
-+ char val[2], bool fallback)
- {
- char buf[10];
- int err;
-@@ -162,7 +162,7 @@ static void nvram_read_alpha2(const char
- pr_warn("alpha2 is too long %s\n", buf);
- return;
- }
-- memcpy(val, buf, sizeof(val));
-+ memcpy(val, buf, 2);
- }
-
- static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
-@@ -181,7 +181,7 @@ static void bcm47xx_fill_sprom_r1234589(
- fallback);
- nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.a1, 0,
- fallback);
-- nvram_read_alpha2(prefix, "ccode", &sprom->alpha2, fallback);
-+ nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
- }
-
- static void bcm47xx_fill_sprom_r12389(struct ssb_sprom *sprom,
-@@ -634,20 +634,20 @@ static void bcm47xx_fill_sprom_path_r45(
- static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
- {
-- nvram_read_macaddr(prefix, "et0macaddr", &sprom->et0mac, fallback);
-+ nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
- nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
- fallback);
- nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0,
- fallback);
-
-- nvram_read_macaddr(prefix, "et1macaddr", &sprom->et1mac, fallback);
-+ nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback);
- nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0,
- fallback);
- nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
- fallback);
-
-- nvram_read_macaddr(prefix, "macaddr", &sprom->il0mac, fallback);
-- nvram_read_macaddr(prefix, "il0macaddr", &sprom->il0mac, fallback);
-+ nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
-+ nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
- }
-
- static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
diff --git a/target/linux/brcm47xx/patches-3.10/110-MIPS-BCM47XX-add-vint-irq.patch b/target/linux/brcm47xx/patches-3.10/110-MIPS-BCM47XX-add-vint-irq.patch
deleted file mode 100644
index e77f5d9..0000000
--- a/target/linux/brcm47xx/patches-3.10/110-MIPS-BCM47XX-add-vint-irq.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From d9e8fd334d85fc8e4a2867655309a60c8de80883 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 20 Nov 2013 23:03:35 +0100
-Subject: [PATCH 18/18] bcm47xx: add cpu_has_vint
-
----
- arch/mips/bcm47xx/Kconfig | 1 +
- arch/mips/bcm47xx/irq.c | 24 ++++++++++++++++++++++++
- 2 files changed, 25 insertions(+)
-
---- a/arch/mips/bcm47xx/Kconfig
-+++ b/arch/mips/bcm47xx/Kconfig
-@@ -21,6 +21,7 @@ config BCM47XX_SSB
- config BCM47XX_BCMA
- bool "BCMA Support for Broadcom BCM47XX"
- select SYS_HAS_CPU_MIPS32_R2
-+ select CPU_MIPSR2_IRQ_VI
- select BCMA
- select BCMA_HOST_SOC
- select BCMA_DRIVER_MIPS
---- a/arch/mips/bcm47xx/irq.c
-+++ b/arch/mips/bcm47xx/irq.c
-@@ -25,6 +25,7 @@
- #include <linux/types.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
-+#include <asm/setup.h>
- #include <asm/irq_cpu.h>
- #include <bcm47xx.h>
-
-@@ -50,6 +51,18 @@ void plat_irq_dispatch(void)
- do_IRQ(6);
- }
-
-+#define DEFINE_HWx_IRQDISPATCH(x) \
-+ static void bcm47xx_hw ## x ## _irqdispatch(void) \
-+ { \
-+ do_IRQ(x); \
-+ }
-+DEFINE_HWx_IRQDISPATCH(2)
-+DEFINE_HWx_IRQDISPATCH(3)
-+DEFINE_HWx_IRQDISPATCH(4)
-+DEFINE_HWx_IRQDISPATCH(5)
-+DEFINE_HWx_IRQDISPATCH(6)
-+DEFINE_HWx_IRQDISPATCH(7)
-+
- void __init arch_init_irq(void)
- {
- #ifdef CONFIG_BCM47XX_BCMA
-@@ -64,4 +77,14 @@ void __init arch_init_irq(void)
- }
- #endif
- mips_cpu_irq_init();
-+
-+ if (cpu_has_vint) {
-+ pr_info("Setting up vectored interrupts\n");
-+ set_vi_handler(2, bcm47xx_hw2_irqdispatch);
-+ set_vi_handler(3, bcm47xx_hw3_irqdispatch);
-+ set_vi_handler(4, bcm47xx_hw4_irqdispatch);
-+ set_vi_handler(5, bcm47xx_hw5_irqdispatch);
-+ set_vi_handler(6, bcm47xx_hw6_irqdispatch);
-+ set_vi_handler(7, bcm47xx_hw7_irqdispatch);
-+ }
- }
diff --git a/target/linux/brcm47xx/patches-3.10/111-MIPS-BCM47XX-add-cpu-overwrite.patch b/target/linux/brcm47xx/patches-3.10/111-MIPS-BCM47XX-add-cpu-overwrite.patch
deleted file mode 100644
index 00e8217..0000000
--- a/target/linux/brcm47xx/patches-3.10/111-MIPS-BCM47XX-add-cpu-overwrite.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From b27da7f1ee034d32e410faf5ab32fc96424a0c62 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 20 Nov 2013 22:16:43 +0100
-Subject: [PATCH 17/18] add overwrite
-
----
- .../asm/mach-bcm47xx/cpu-feature-overrides.h | 82 ++++++++++++++++++++
- 1 file changed, 82 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -0,0 +1,82 @@
-+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 1
-+#define cpu_has_3k_cache 0
-+#define cpu_has_4k_cache 1
-+#define cpu_has_tx39_cache 0
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 1
-+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
-+#define cpu_has_watch 1
-+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
-+#define cpu_has_watch 0
-+#endif
-+#define cpu_has_divec 1
-+#define cpu_has_vce 0
-+#define cpu_has_cache_cdex_p 0
-+#define cpu_has_cache_cdex_s 0
-+#define cpu_has_prefetch 1
-+#define cpu_has_mcheck 1
-+#define cpu_has_ejtag 1
-+#define cpu_has_llsc 1
-+
-+/* cpu_has_mips16 */
-+#define cpu_has_mdmx 0
-+#define cpu_has_mips3d 0
-+#define cpu_has_rixi 0
-+#define cpu_has_mmips 0
-+#define cpu_has_smartmips 0
-+#define cpu_has_vtag_icache 0
-+/* cpu_has_dc_aliases */
-+#define cpu_has_ic_fills_f_dc 0
-+#define cpu_has_pindexed_dcache 0
-+#define cpu_icache_snoops_remote_store 0
-+
-+#define cpu_has_mips_2 1
-+#define cpu_has_mips_3 0
-+#define cpu_has_mips32r1 1
-+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
-+#define cpu_has_mips32r2 1
-+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
-+#define cpu_has_mips32r2 0
-+#endif
-+#define cpu_has_mips64r1 0
-+#define cpu_has_mips64r2 0
-+
-+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
-+#define cpu_has_dsp 1
-+#define cpu_has_dsp2 1
-+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
-+#define cpu_has_dsp 0
-+#define cpu_has_dsp2 0
-+#endif
-+#define cpu_has_mipsmt 0
-+/* cpu_has_userlocal */
-+
-+#define cpu_has_nofpuex 0
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
-+#define cpu_has_vint 1
-+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
-+#define cpu_has_vint 0
-+#endif
-+#define cpu_has_veic 0
-+#define cpu_has_inclusive_pcaches 0
-+
-+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
-+#define cpu_dcache_line_size() 32
-+#define cpu_icache_line_size() 32
-+#define cpu_has_perf_cntr_intr_bit 1
-+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
-+#define cpu_dcache_line_size() 16
-+#define cpu_icache_line_size() 16
-+#define cpu_has_perf_cntr_intr_bit 0
-+#endif
-+#define cpu_scache_line_size() 0
-+#define cpu_has_vz 0
-+
-+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch b/target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch
deleted file mode 100644
index 424d1f0..0000000
--- a/target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From 98e54a60a7346ef31cb851b670a238ad428b58fe Mon Sep 17 00:00:00 2001
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Thu, 2 Jan 2014 13:27:15 +0100
-Subject: [PATCH 029/110] MIPS: BCM47XX: Prepare support for LEDs
-
-So far this is mostly just a proof of concept, database consists of a
-single device. Creating a nice iterateable array wasn't an option
-because devices have different amount of LEDs. And we don't want to
-waste memory just because of support for a device with dozens on LEDs.
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/6299/
----
- arch/mips/bcm47xx/Kconfig | 2 +
- arch/mips/bcm47xx/Makefile | 2 +-
- arch/mips/bcm47xx/bcm47xx_private.h | 9 +++++
- arch/mips/bcm47xx/leds.c | 73 +++++++++++++++++++++++++++++++++++
- arch/mips/bcm47xx/setup.c | 6 +++
- 5 files changed, 91 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm47xx/bcm47xx_private.h
- create mode 100644 arch/mips/bcm47xx/leds.c
-
---- a/arch/mips/bcm47xx/Kconfig
-+++ b/arch/mips/bcm47xx/Kconfig
-@@ -12,6 +12,7 @@ config BCM47XX_SSB
- select SSB_PCICORE_HOSTMODE if PCI
- select SSB_DRIVER_GPIO
- select GPIOLIB
-+ select LEDS_GPIO_REGISTER
- default y
- help
- Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
-@@ -29,6 +30,7 @@ config BCM47XX_BCMA
- select BCMA_DRIVER_PCI_HOSTMODE if PCI
- select BCMA_DRIVER_GPIO
- select GPIOLIB
-+ select LEDS_GPIO_REGISTER
- default y
- help
- Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -4,5 +4,5 @@
- #
-
- obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
--obj-y += board.o
-+obj-y += board.o leds.o
- obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/bcm47xx_private.h
-@@ -0,0 +1,9 @@
-+#ifndef LINUX_BCM47XX_PRIVATE_H_
-+#define LINUX_BCM47XX_PRIVATE_H_
-+
-+#include <linux/kernel.h>
-+
-+/* leds.c */
-+void __init bcm47xx_leds_register(void);
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -0,0 +1,73 @@
-+#include "bcm47xx_private.h"
-+
-+#include <linux/leds.h>
-+#include <bcm47xx_board.h>
-+
-+static const struct gpio_led
-+bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = {
-+ {
-+ .name = "bcm47xx:green:wps",
-+ .gpio = 1,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-+ },
-+ {
-+ .name = "bcm47xx:green:power",
-+ .gpio = 2,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-+ },
-+ {
-+ .name = "bcm47xx:orange:power",
-+ .gpio = 3,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-+ },
-+ {
-+ .name = "bcm47xx:green:usb1",
-+ .gpio = 8,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-+ },
-+ {
-+ .name = "bcm47xx:green:2ghz",
-+ .gpio = 9,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-+ },
-+ {
-+ .name = "bcm47xx:blue:5ghz",
-+ .gpio = 11,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-+ },
-+ {
-+ .name = "bcm47xx:green:usb2",
-+ .gpio = 14,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-+ },
-+};
-+
-+static struct gpio_led_platform_data bcm47xx_leds_pdata;
-+
-+#define bcm47xx_set_pdata(dev_leds) do { \
-+ bcm47xx_leds_pdata.leds = dev_leds; \
-+ bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds); \
-+} while (0)
-+
-+void __init bcm47xx_leds_register(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+
-+ switch (board) {
-+ case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds);
-+ break;
-+ default:
-+ pr_debug("No LEDs configuration found for this device\n");
-+ return;
-+ }
-+
-+ gpio_led_register_device(-1, &bcm47xx_leds_pdata);
-+}
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -26,6 +26,8 @@
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-+#include "bcm47xx_private.h"
-+
- #include <linux/export.h>
- #include <linux/types.h>
- #include <linux/ssb/ssb.h>
-@@ -243,6 +245,9 @@ static int __init bcm47xx_register_bus_c
- break;
- #endif
- }
-+
-+ bcm47xx_leds_register();
-+
- return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
diff --git a/target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch b/target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch
deleted file mode 100644
index 627ea70..0000000
--- a/target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From e352ec3c581df40f159771b30c262c2bc7fb802e Mon Sep 17 00:00:00 2001
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Thu, 2 Jan 2014 13:31:32 +0100
-Subject: [PATCH 030/110] MIPS: BCM47XX: Prepare support for GPIO buttons
-
-So far this adds support for one Netgear model only, but it's designed
-and ready to add many more device. We could hopefully import database
-from OpenWrt.
-Support for SSB is currently disabled, because SSB doesn't implement IRQ
-domain yet.
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/6300/
----
- arch/mips/bcm47xx/Makefile | 2 +-
- arch/mips/bcm47xx/bcm47xx_private.h | 3 ++
- arch/mips/bcm47xx/buttons.c | 95 +++++++++++++++++++++++++++++++++++
- arch/mips/bcm47xx/setup.c | 1 +
- 4 files changed, 100 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm47xx/buttons.c
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -4,5 +4,5 @@
- #
-
- obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
--obj-y += board.o leds.o
-+obj-y += board.o buttons.o leds.o
- obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
---- a/arch/mips/bcm47xx/bcm47xx_private.h
-+++ b/arch/mips/bcm47xx/bcm47xx_private.h
-@@ -3,6 +3,9 @@
-
- #include <linux/kernel.h>
-
-+/* buttons.c */
-+int __init bcm47xx_buttons_register(void);
-+
- /* leds.c */
- void __init bcm47xx_leds_register(void);
-
---- /dev/null
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -0,0 +1,95 @@
-+#include "bcm47xx_private.h"
-+
-+#include <linux/input.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/interrupt.h>
-+#include <linux/ssb/ssb_embedded.h>
-+#include <bcm47xx_board.h>
-+#include <bcm47xx.h>
-+
-+/**************************************************
-+ * Database
-+ **************************************************/
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = {
-+ {
-+ .code = KEY_WPS_BUTTON,
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .code = KEY_RFKILL,
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .code = KEY_RESTART,
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+};
-+
-+/**************************************************
-+ * Init
-+ **************************************************/
-+
-+static struct gpio_keys_platform_data bcm47xx_button_pdata;
-+
-+static struct platform_device bcm47xx_buttons_gpio_keys = {
-+ .name = "gpio-keys",
-+ .dev = {
-+ .platform_data = &bcm47xx_button_pdata,
-+ }
-+};
-+
-+/* Copy data from __initconst */
-+static int __init bcm47xx_buttons_copy(const struct gpio_keys_button *buttons,
-+ size_t nbuttons)
-+{
-+ size_t size = nbuttons * sizeof(*buttons);
-+
-+ bcm47xx_button_pdata.buttons = kmalloc(size, GFP_KERNEL);
-+ if (!bcm47xx_button_pdata.buttons)
-+ return -ENOMEM;
-+ memcpy(bcm47xx_button_pdata.buttons, buttons, size);
-+ bcm47xx_button_pdata.nbuttons = nbuttons;
-+
-+ return 0;
-+}
-+
-+#define bcm47xx_copy_bdata(dev_buttons) \
-+ bcm47xx_buttons_copy(dev_buttons, ARRAY_SIZE(dev_buttons));
-+
-+int __init bcm47xx_buttons_register(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+ int err;
-+
-+#ifdef CONFIG_BCM47XX_SSB
-+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) {
-+ pr_debug("Buttons on SSB are not supported yet.\n");
-+ return -ENOTSUPP;
-+ }
-+#endif
-+
-+ switch (board) {
-+ case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1);
-+ break;
-+ default:
-+ pr_debug("No buttons configuration found for this device\n");
-+ return -ENOTSUPP;
-+ }
-+
-+ if (err)
-+ return -ENOMEM;
-+
-+ err = platform_device_register(&bcm47xx_buttons_gpio_keys);
-+ if (err) {
-+ pr_err("Failed to register platform device: %d\n", err);
-+ return err;
-+ }
-+
-+ return 0;
-+}
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -246,6 +246,7 @@ static int __init bcm47xx_register_bus_c
- #endif
- }
-
-+ bcm47xx_buttons_register();
- bcm47xx_leds_register();
-
- return 0;
diff --git a/target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch b/target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch
deleted file mode 100644
index e445a0c..0000000
--- a/target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch
+++ /dev/null
@@ -1,497 +0,0 @@
-From 12dacbcfa86048cc0810fc6b91b3d7329722e59b Mon Sep 17 00:00:00 2001
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Thu, 2 Jan 2014 13:37:56 +0100
-Subject: [PATCH 031/110] MIPS: BCM47XX: Import buttons database from OpenWrt
-
-This includes all devices from OpenWrt's "diag" that we support in arch
-code (we have entries for in enum bcm47xx_board).
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
-Acked-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/6301/
----
- arch/mips/bcm47xx/buttons.c | 456 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 456 insertions(+)
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -11,6 +11,299 @@
- * Database
- **************************************************/
-
-+#define BCM47XX_GPIO_KEY(_gpio, _code) \
-+ { \
-+ .code = _code, \
-+ .gpio = _gpio, \
-+ .active_low = 1, \
-+ }
-+
-+/* Asus */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn12[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(1, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(4, BTN_0), /* Router mode */
-+ BCM47XX_GPIO_KEY(5, BTN_1), /* Repeater mode */
-+ BCM47XX_GPIO_KEY(6, BTN_2), /* AP mode */
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn16[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn66u[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(9, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl300g[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl320ge[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl330ge[] __initconst = {
-+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl500gd[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl500gpv1[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl500gpv2[] __initconst = {
-+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl500w[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(7, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl520gc[] __initconst = {
-+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl520gu[] __initconst = {
-+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl700ge[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_POWER), /* Hard disk power switch */
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), /* EZSetup */
-+ BCM47XX_GPIO_KEY(6, KEY_COPY), /* Copy data from USB to internal disk */
-+ BCM47XX_GPIO_KEY(7, KEY_RESTART), /* Hard reset */
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wlhdd[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+/* Huawei */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_huawei_e970[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+/* Belkin */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_belkin_f7d4301[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
-+};
-+
-+/* Buffalo */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_buffalo_whr2_a54g54[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_buffalo_whr_g125[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_buffalo_whr_g54s[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_buffalo_whr_hp_g54[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_buffalo_wzr_g300n[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_buffalo_wzr_rs_g54[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_buffalo_wzr_rs_g54hp[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+};
-+
-+/* Dell */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_dell_tm2300[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
-+};
-+
-+/* D-Link */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_dlink_dir130[] __initconst = {
-+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(7, KEY_UNKNOWN),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_dlink_dir330[] __initconst = {
-+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(7, KEY_UNKNOWN),
-+};
-+
-+/* Linksys */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_e1000v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_e1000v21[] __initconst = {
-+ BCM47XX_GPIO_KEY(9, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(10, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_e2000v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_e3000v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_e3200v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_e4200v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt150nv1[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt150nv11[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt160nv1[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt160nv3[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt300nv11[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_UNKNOWN),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt310nv1[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(8, KEY_UNKNOWN),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt610nv1[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt610nv2[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+/* Motorola */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_motorola_we800g[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_motorola_wr850gp[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_motorola_wr850gv2v3[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
-+};
-+
-+/* Netgear */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(8, KEY_RFKILL),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wndr3700v3[] __initconst = {
-+ BCM47XX_GPIO_KEY(2, KEY_RFKILL),
-+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+};
-+
- static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = {
- {
-@@ -30,6 +323,18 @@ bcm47xx_buttons_netgear_wndr4500_v1[] __
- },
- };
-
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+/* SimpleTech */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_simpletech_simpleshare[] __initconst = {
-+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
-+};
-+
- /**************************************************
- * Init
- **************************************************/
-@@ -74,9 +379,160 @@ int __init bcm47xx_buttons_register(void
- #endif
-
- switch (board) {
-+ case BCM47XX_BOARD_ASUS_RTN12:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
-+ break;
-+ case BCM47XX_BOARD_ASUS_RTN16:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn16);
-+ break;
-+ case BCM47XX_BOARD_ASUS_RTN66U:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn66u);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL300G:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl300g);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL320GE:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl320ge);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL330GE:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL500GD:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL500GPV1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv1);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL500GPV2:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv2);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL500W:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500w);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL520GC:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gc);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL520GU:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gu);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL700GE:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl700ge);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WLHDD:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd);
-+ break;
-+
-+ case BCM47XX_BOARD_BELKIN_F7D4301:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301);
-+ break;
-+
-+ case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr2_a54g54);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WHR_G125:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g125);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WHR_G54S:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g54s);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_hp_g54);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WZR_G300N:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_g300n);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54hp);
-+ break;
-+
-+ case BCM47XX_BOARD_DELL_TM2300:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dell_tm2300);
-+ break;
-+
-+ case BCM47XX_BOARD_DLINK_DIR130:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir130);
-+ break;
-+ case BCM47XX_BOARD_DLINK_DIR330:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir330);
-+ break;
-+
-+ case BCM47XX_BOARD_HUAWEI_E970:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_huawei_e970);
-+ break;
-+
-+ case BCM47XX_BOARD_LINKSYS_E1000V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E1000V21:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v21);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E2000V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2000v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E3000V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3000v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E3200V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3200v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E4200V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e4200v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT150NV1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT150NV11:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv11);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT160NV1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT160NV3:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv3);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT300NV11:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt300nv11);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT310NV1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT610NV1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT610NV2:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2);
-+ break;
-+
-+ case BCM47XX_BOARD_MOTOROLA_WE800G:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
-+ break;
-+ case BCM47XX_BOARD_MOTOROLA_WR850GP:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gp);
-+ break;
-+ case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
-+ break;
-+
-+ case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
-+ break;
-+ case BCM47XX_BOARD_NETGEAR_WNDR3700V3:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1);
- break;
-+ case BCM47XX_BOARD_NETGEAR_WNR834BV2:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
-+ break;
-+
-+ case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_simpletech_simpleshare);
-+ break;
-+
- default:
- pr_debug("No buttons configuration found for this device\n");
- return -ENOTSUPP;
diff --git a/target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch b/target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch
deleted file mode 100644
index 2c7b5b7..0000000
--- a/target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch
+++ /dev/null
@@ -1,532 +0,0 @@
-From 6d4b22bc843c9de0f6acdbdcfb9b91b897a39e9c Mon Sep 17 00:00:00 2001
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Thu, 2 Jan 2014 12:32:57 +0100
-Subject: [PATCH 032/110] MIPS: BCM47XX: Import LEDs database from OpenWrt
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
-Acked-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/6298/
----
- arch/mips/bcm47xx/leds.c | 494 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 494 insertions(+)
-
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -3,6 +3,334 @@
- #include <linux/leds.h>
- #include <bcm47xx_board.h>
-
-+/**************************************************
-+ * Database
-+ **************************************************/
-+
-+#define BCM47XX_GPIO_LED(_gpio, _color, _function, _active_low, \
-+ _default_state) \
-+ { \
-+ .name = "bcm47xx:" _color ":" _function, \
-+ .gpio = _gpio, \
-+ .active_low = _active_low, \
-+ .default_state = _default_state, \
-+ }
-+
-+/* Asus */
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_rtn12[] __initconst = {
-+ BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_rtn16[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_rtn66u[] __initconst = {
-+ BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl300g[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl320ge[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(11, "unk", "link", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl330ge[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl500gd[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl500gpv1[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl500gpv2[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl500w[] __initconst = {
-+ BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl520gc[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl520gu[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wl700ge[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), /* Labeled "READY" (there is no "power" LED). Originally ON, flashing on USB activity. */
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_asus_wlhdd[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(2, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+/* Belkin */
-+
-+static const struct gpio_led
-+bcm47xx_leds_belkin_f7d4301[] __initconst = {
-+ BCM47XX_GPIO_LED(10, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(11, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(12, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(13, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(14, "unk", "usb0", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(15, "unk", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+/* Buffalo */
-+
-+static const struct gpio_led
-+bcm47xx_leds_buffalo_whr2_a54g54[] __initconst = {
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_buffalo_whr_g125[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_buffalo_whr_g54s[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_buffalo_whr_hp_g54[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_buffalo_wzr_g300n[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_buffalo_wzr_rs_g54[] __initconst = {
-+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_buffalo_wzr_rs_g54hp[] __initconst = {
-+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+/* Dell */
-+
-+static const struct gpio_led
-+bcm47xx_leds_dell_tm2300[] __initconst = {
-+ BCM47XX_GPIO_LED(6, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+/* D-Link */
-+
-+static const struct gpio_led
-+bcm47xx_leds_dlink_dir130[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */
-+ BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_dlink_dir330[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */
-+ BCM47XX_GPIO_LED(4, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+/* Huawei */
-+
-+static const struct gpio_led
-+bcm47xx_leds_huawei_e970[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+/* Linksys */
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_e1000v1[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_e1000v21[] __initconst = {
-+ BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_e2000v1[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_e3000v1[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_e3200v1[] __initconst = {
-+ BCM47XX_GPIO_LED(3, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_e4200v1[] __initconst = {
-+ BCM47XX_GPIO_LED(5, "white", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt150nv1[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt150nv11[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt160nv1[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(5, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt160nv3[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt300nv11[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt310nv1[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt610nv2[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+/* Motorola */
-+
-+static const struct gpio_led
-+bcm47xx_leds_motorola_we800g[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "amber", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "unk", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), /* There are only 3 LEDs: Power, Wireless and Device (ethernet) */
-+ BCM47XX_GPIO_LED(4, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_motorola_wr850gp[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(6, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_motorola_wr850gv2v3[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+/* Netgear */
-+
-+static const struct gpio_led
-+bcm47xx_leds_netgear_wndr3400v1[] __initconst = {
-+ BCM47XX_GPIO_LED(2, "green", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
- static const struct gpio_led
- bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = {
- {
-@@ -49,6 +377,24 @@ bcm47xx_leds_netgear_wndr4500_v1_leds[]
- },
- };
-
-+static const struct gpio_led
-+bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
-+ BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+/* SimpleTech */
-+
-+static const struct gpio_led
-+bcm47xx_leds_simpletech_simpleshare[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* "Ready" LED */
-+};
-+
-+/**************************************************
-+ * Init
-+ **************************************************/
-+
- static struct gpio_led_platform_data bcm47xx_leds_pdata;
-
- #define bcm47xx_set_pdata(dev_leds) do { \
-@@ -61,9 +407,157 @@ void __init bcm47xx_leds_register(void)
- enum bcm47xx_board board = bcm47xx_board_get();
-
- switch (board) {
-+ case BCM47XX_BOARD_ASUS_RTN12:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
-+ break;
-+ case BCM47XX_BOARD_ASUS_RTN16:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16);
-+ break;
-+ case BCM47XX_BOARD_ASUS_RTN66U:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn66u);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL300G:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl300g);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL320GE:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl320ge);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL330GE:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL500GD:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL500GPV1:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv1);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL500GPV2:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv2);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL500W:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500w);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL520GC:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gc);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL520GU:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gu);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WL700GE:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl700ge);
-+ break;
-+ case BCM47XX_BOARD_ASUS_WLHDD:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd);
-+ break;
-+
-+ case BCM47XX_BOARD_BELKIN_F7D4301:
-+ bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301);
-+ break;
-+
-+ case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
-+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr2_a54g54);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WHR_G125:
-+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g125);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WHR_G54S:
-+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g54s);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
-+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_hp_g54);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WZR_G300N:
-+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_g300n);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
-+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54);
-+ break;
-+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
-+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54hp);
-+ break;
-+
-+ case BCM47XX_BOARD_DELL_TM2300:
-+ bcm47xx_set_pdata(bcm47xx_leds_dell_tm2300);
-+ break;
-+
-+ case BCM47XX_BOARD_DLINK_DIR130:
-+ bcm47xx_set_pdata(bcm47xx_leds_dlink_dir130);
-+ break;
-+ case BCM47XX_BOARD_DLINK_DIR330:
-+ bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330);
-+ break;
-+
-+ case BCM47XX_BOARD_HUAWEI_E970:
-+ bcm47xx_set_pdata(bcm47xx_leds_huawei_e970);
-+ break;
-+
-+ case BCM47XX_BOARD_LINKSYS_E1000V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E1000V21:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v21);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E2000V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e2000v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E3000V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e3000v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E3200V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e3200v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_E4200V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e4200v1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT150NV1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT150NV11:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv11);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT160NV1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT160NV3:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv3);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT300NV11:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt300nv11);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT310NV1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT610NV1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT610NV2:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2);
-+ break;
-+
-+ case BCM47XX_BOARD_MOTOROLA_WE800G:
-+ bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
-+ break;
-+ case BCM47XX_BOARD_MOTOROLA_WR850GP:
-+ bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gp);
-+ break;
-+ case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
-+ bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gv2v3);
-+ break;
-+
-+ case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr3400v1);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds);
- break;
-+ case BCM47XX_BOARD_NETGEAR_WNR834BV2:
-+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
-+ break;
-+
-+ case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
-+ bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
-+ break;
-+
- default:
- pr_debug("No LEDs configuration found for this device\n");
- return;
diff --git a/target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch b/target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch
deleted file mode 100644
index 7d59955..0000000
--- a/target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 6dac092b12755ccbc00412871cd9535b687d16d7 Mon Sep 17 00:00:00 2001
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Fri, 3 Jan 2014 09:55:30 +0100
-Subject: [PATCH] MIPS: BCM47XX: Enable buttons support on SSB
-
-This is supported since implementing IRQ domain in ssb.
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
----
- arch/mips/bcm47xx/buttons.c | 8 --------
- 1 file changed, 8 deletions(-)
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -3,7 +3,6 @@
- #include <linux/input.h>
- #include <linux/gpio_keys.h>
- #include <linux/interrupt.h>
--#include <linux/ssb/ssb_embedded.h>
- #include <bcm47xx_board.h>
- #include <bcm47xx.h>
-
-@@ -371,13 +370,6 @@ int __init bcm47xx_buttons_register(void
- enum bcm47xx_board board = bcm47xx_board_get();
- int err;
-
--#ifdef CONFIG_BCM47XX_SSB
-- if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) {
-- pr_debug("Buttons on SSB are not supported yet.\n");
-- return -ENOTSUPP;
-- }
--#endif
--
- switch (board) {
- case BCM47XX_BOARD_ASUS_RTN12:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
diff --git a/target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch b/target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch
deleted file mode 100644
index 00f962a..0000000
--- a/target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 2d842783d4aaa25803e92f663869ea64a4eddd00 Mon Sep 17 00:00:00 2001
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Fri, 3 Jan 2014 09:37:42 +0100
-Subject: [PATCH] MIPS: BCM47XX: Convert WNDR4500 to new syntax
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
----
- arch/mips/bcm47xx/buttons.c | 22 ++++--------------
- arch/mips/bcm47xx/leds.c | 53 ++++++++-----------------------------------
- 2 files changed, 14 insertions(+), 61 deletions(-)
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -304,22 +304,10 @@ bcm47xx_buttons_netgear_wndr3700v3[] __i
- };
-
- static const struct gpio_keys_button
--bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = {
-- {
-- .code = KEY_WPS_BUTTON,
-- .gpio = 4,
-- .active_low = 1,
-- },
-- {
-- .code = KEY_RFKILL,
-- .gpio = 5,
-- .active_low = 1,
-- },
-- {
-- .code = KEY_RESTART,
-- .gpio = 6,
-- .active_low = 1,
-- },
-+bcm47xx_buttons_netgear_wndr4500v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(5, KEY_RFKILL),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
- };
-
- static const struct gpio_keys_button
-@@ -515,7 +503,7 @@ int __init bcm47xx_buttons_register(void
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3);
- break;
- case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
-- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1);
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
- break;
- case BCM47XX_BOARD_NETGEAR_WNR834BV2:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -332,49 +332,14 @@ bcm47xx_leds_netgear_wndr3400v1[] __init
- };
-
- static const struct gpio_led
--bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = {
-- {
-- .name = "bcm47xx:green:wps",
-- .gpio = 1,
-- .active_low = 1,
-- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-- },
-- {
-- .name = "bcm47xx:green:power",
-- .gpio = 2,
-- .active_low = 1,
-- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-- },
-- {
-- .name = "bcm47xx:orange:power",
-- .gpio = 3,
-- .active_low = 1,
-- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-- },
-- {
-- .name = "bcm47xx:green:usb1",
-- .gpio = 8,
-- .active_low = 1,
-- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-- },
-- {
-- .name = "bcm47xx:green:2ghz",
-- .gpio = 9,
-- .active_low = 1,
-- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-- },
-- {
-- .name = "bcm47xx:blue:5ghz",
-- .gpio = 11,
-- .active_low = 1,
-- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-- },
-- {
-- .name = "bcm47xx:green:usb2",
-- .gpio = 14,
-- .active_low = 1,
-- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
-- },
-+bcm47xx_leds_netgear_wndr4500v1[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(3, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(8, "green", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(9, "green", "2ghz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(11, "blue", "5ghz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(14, "green", "usb2", 1, LEDS_GPIO_DEFSTATE_OFF),
- };
-
- static const struct gpio_led
-@@ -548,7 +513,7 @@ void __init bcm47xx_leds_register(void)
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr3400v1);
- break;
- case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
-- bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds);
-+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
- break;
- case BCM47XX_BOARD_NETGEAR_WNR834BV2:
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
diff --git a/target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch b/target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch
deleted file mode 100644
index e14bea9..0000000
--- a/target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 5c985c2a17ae0bdbc95fd8246631e00a35746396 Mon Sep 17 00:00:00 2001
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Fri, 3 Jan 2014 09:04:39 +0100
-Subject: [PATCH] MIPS: BCM47XX: Use "timer" trigger for status LEDs
-
-Some devices have power LED as well as status LED. The second one is
-used to show the firmware is up and running. Set "timer" trigger for
-such LEDs.
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
----
- arch/mips/bcm47xx/leds.c | 14 ++++++++++++--
- 1 file changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -16,6 +16,16 @@
- .default_state = _default_state, \
- }
-
-+#define BCM47XX_GPIO_LED_TRIGGER(_gpio, _color, _function, _active_low, \
-+ _default_trigger) \
-+ { \
-+ .name = "bcm47xx:" _color ":" _function, \
-+ .gpio = _gpio, \
-+ .active_low = _active_low, \
-+ .default_state = LEDS_GPIO_DEFSTATE_OFF, \
-+ .default_trigger = _default_trigger, \
-+ }
-+
- /* Asus */
-
- static const struct gpio_led
-@@ -176,13 +186,13 @@ bcm47xx_leds_dell_tm2300[] __initconst =
-
- static const struct gpio_led
- bcm47xx_leds_dlink_dir130[] __initconst = {
-- BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */
-+ BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */
- BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
- };
-
- static const struct gpio_led
- bcm47xx_leds_dlink_dir330[] __initconst = {
-- BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */
-+ BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */
- BCM47XX_GPIO_LED(4, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
- };
diff --git a/target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-Drop-WGT634U-hacks.patch b/target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-Drop-WGT634U-hacks.patch
deleted file mode 100644
index 5a091e6..0000000
--- a/target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-Drop-WGT634U-hacks.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-From 68e30f30875d4e4608cebec27ca8bd07be0d0f64 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 2 Jan 2014 13:53:15 +0100
-Subject: [PATCH] MIPS: BCM47XX: Drop WGT634U hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This old wgt634u.c was trying to implement a bit ugly support for
-Netgear WGT634U. It provided info about LED, flash mapping & layout and
-was trying to handle reset button.
-
-This is not needed anymore as we have replacement for all this stuff.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/6302/
----
- arch/mips/bcm47xx/Makefile | 1 -
- arch/mips/bcm47xx/wgt634u.c | 174 --------------------------------------------
- 2 files changed, 175 deletions(-)
- delete mode 100644 arch/mips/bcm47xx/wgt634u.c
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -5,4 +5,3 @@
-
- obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
- obj-y += board.o buttons.o leds.o
--obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ /dev/null
-@@ -1,174 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License. See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
-- */
--
--#include <linux/platform_device.h>
--#include <linux/module.h>
--#include <linux/leds.h>
--#include <linux/mtd/physmap.h>
--#include <linux/ssb/ssb.h>
--#include <linux/ssb/ssb_embedded.h>
--#include <linux/interrupt.h>
--#include <linux/reboot.h>
--#include <linux/gpio.h>
--#include <asm/mach-bcm47xx/bcm47xx.h>
--
--/* GPIO definitions for the WGT634U */
--#define WGT634U_GPIO_LED 3
--#define WGT634U_GPIO_RESET 2
--#define WGT634U_GPIO_TP1 7
--#define WGT634U_GPIO_TP2 6
--#define WGT634U_GPIO_TP3 5
--#define WGT634U_GPIO_TP4 4
--#define WGT634U_GPIO_TP5 1
--
--static struct gpio_led wgt634u_leds[] = {
-- {
-- .name = "power",
-- .gpio = WGT634U_GPIO_LED,
-- .active_low = 1,
-- .default_trigger = "heartbeat",
-- },
--};
--
--static struct gpio_led_platform_data wgt634u_led_data = {
-- .num_leds = ARRAY_SIZE(wgt634u_leds),
-- .leds = wgt634u_leds,
--};
--
--static struct platform_device wgt634u_gpio_leds = {
-- .name = "leds-gpio",
-- .id = -1,
-- .dev = {
-- .platform_data = &wgt634u_led_data,
-- }
--};
--
--
--/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
-- firmware. */
--static struct mtd_partition wgt634u_partitions[] = {
-- {
-- .name = "cfe",
-- .offset = 0,
-- .size = 0x60000, /* 384k */
-- .mask_flags = MTD_WRITEABLE /* force read-only */
-- },
-- {
-- .name = "config",
-- .offset = 0x60000,
-- .size = 0x20000 /* 128k */
-- },
-- {
-- .name = "linux",
-- .offset = 0x80000,
-- .size = 0x140000 /* 1280k */
-- },
-- {
-- .name = "jffs",
-- .offset = 0x1c0000,
-- .size = 0x620000 /* 6272k */
-- },
-- {
-- .name = "nvram",
-- .offset = 0x7e0000,
-- .size = 0x20000 /* 128k */
-- },
--};
--
--static struct physmap_flash_data wgt634u_flash_data = {
-- .parts = wgt634u_partitions,
-- .nr_parts = ARRAY_SIZE(wgt634u_partitions)
--};
--
--static struct resource wgt634u_flash_resource = {
-- .flags = IORESOURCE_MEM,
--};
--
--static struct platform_device wgt634u_flash = {
-- .name = "physmap-flash",
-- .id = 0,
-- .dev = { .platform_data = &wgt634u_flash_data, },
-- .resource = &wgt634u_flash_resource,
-- .num_resources = 1,
--};
--
--/* Platform devices */
--static struct platform_device *wgt634u_devices[] __initdata = {
-- &wgt634u_flash,
-- &wgt634u_gpio_leds,
--};
--
--static irqreturn_t gpio_interrupt(int irq, void *ignored)
--{
-- int state;
--
-- /* Interrupts are shared, check if the current one is
-- a GPIO interrupt. */
-- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
-- SSB_CHIPCO_IRQ_GPIO))
-- return IRQ_NONE;
--
-- state = gpio_get_value(WGT634U_GPIO_RESET);
--
-- /* Interrupt are level triggered, revert the interrupt polarity
-- to clear the interrupt. */
-- ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << WGT634U_GPIO_RESET,
-- state ? 1 << WGT634U_GPIO_RESET : 0);
--
-- if (!state) {
-- printk(KERN_INFO "Reset button pressed");
-- ctrl_alt_del();
-- }
--
-- return IRQ_HANDLED;
--}
--
--static int __init wgt634u_init(void)
--{
-- /* There is no easy way to detect that we are running on a WGT634U
-- * machine. Use the MAC address as an heuristic. Netgear Inc. has
-- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
-- */
-- u8 *et0mac;
--
-- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
-- return -ENODEV;
--
-- et0mac = bcm47xx_bus.ssb.sprom.et0mac;
--
-- if (et0mac[0] == 0x00 &&
-- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
-- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
-- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
--
-- printk(KERN_INFO "WGT634U machine detected.\n");
--
-- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
-- gpio_interrupt, IRQF_SHARED,
-- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
-- gpio_direction_input(WGT634U_GPIO_RESET);
-- ssb_gpio_intmask(&bcm47xx_bus.ssb,
-- 1 << WGT634U_GPIO_RESET,
-- 1 << WGT634U_GPIO_RESET);
-- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
-- SSB_CHIPCO_IRQ_GPIO,
-- SSB_CHIPCO_IRQ_GPIO);
-- }
--
-- wgt634u_flash_data.width = mcore->pflash.buswidth;
-- wgt634u_flash_resource.start = mcore->pflash.window;
-- wgt634u_flash_resource.end = mcore->pflash.window
-- + mcore->pflash.window_size
-- - 1;
-- return platform_add_devices(wgt634u_devices,
-- ARRAY_SIZE(wgt634u_devices));
-- } else
-- return -ENODEV;
--}
--
--module_init(wgt634u_init);
diff --git a/target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch b/target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch
deleted file mode 100644
index 5603a53..0000000
--- a/target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 1f3e1c682a0b5273e3ee8799b54319971f426e6a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 29 Jan 2014 18:06:52 +0100
-Subject: [RFC V2][PATCH] MIPS: BCM47XX: Add new file for device specific workarounds
-
----
-V2: Drop pr_debug for devices we don't need workarounds for. It was too
- load and not useful at all.
----
- arch/mips/bcm47xx/Makefile | 2 +-
- arch/mips/bcm47xx/bcm47xx_private.h | 3 +++
- arch/mips/bcm47xx/setup.c | 1 +
- arch/mips/bcm47xx/workarounds.c | 25 +++++++++++++++++++++++++
- 4 files changed, 30 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm47xx/workarounds.c
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -4,4 +4,4 @@
- #
-
- obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
--obj-y += board.o buttons.o leds.o
-+obj-y += board.o buttons.o leds.o workarounds.o
---- a/arch/mips/bcm47xx/bcm47xx_private.h
-+++ b/arch/mips/bcm47xx/bcm47xx_private.h
-@@ -9,4 +9,7 @@ int __init bcm47xx_buttons_register(void
- /* leds.c */
- void __init bcm47xx_leds_register(void);
-
-+/* workarounds.c */
-+void __init bcm47xx_workarounds(void);
-+
- #endif
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -248,6 +248,7 @@ static int __init bcm47xx_register_bus_c
-
- bcm47xx_buttons_register();
- bcm47xx_leds_register();
-+ bcm47xx_workarounds();
-
- return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm47xx/workarounds.c
-@@ -0,0 +1,31 @@
-+#include "bcm47xx_private.h"
-+
-+#include <linux/gpio.h>
-+#include <bcm47xx_board.h>
-+#include <bcm47xx.h>
-+
-+static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
-+{
-+ const int usb_power = 12;
-+ int err;
-+
-+ err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
-+ if (err)
-+ pr_err("Failed to request USB power gpio: %d\n", err);
-+ else
-+ gpio_free(usb_power);
-+}
-+
-+void __init bcm47xx_workarounds(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+
-+ switch (board) {
-+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
-+ bcm47xx_workarounds_netgear_wnr3500l();
-+ break;
-+ default:
-+ /* No workaround(s) needed */
-+ break;
-+ }
-+}
diff --git a/target/linux/brcm47xx/patches-3.10/139-MIPS-BCM47XX-detect-more-linksys-devices.patch b/target/linux/brcm47xx/patches-3.10/139-MIPS-BCM47XX-detect-more-linksys-devices.patch
deleted file mode 100644
index ecb6316..0000000
--- a/target/linux/brcm47xx/patches-3.10/139-MIPS-BCM47XX-detect-more-linksys-devices.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From b09189336f6d974c554aed03b4651e9f68ce0abd Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 23 Feb 2014 16:38:29 +0100
-Subject: [PATCH 3/6] MIPS: BCM47XX: detect some more Linksys devices
-
-The Linksys WRT54G/GS/GL family uses the same boardtype numbers, and
-the same gpio configuration. The boardtype numbers are changing with
-the hardware versions, but these hardware numbers are different or each
-model.
-Detect them all as one device, this also worked in OpenWrt.
----
- arch/mips/bcm47xx/board.c | 4 +++-
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 2 +-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -175,7 +175,9 @@ struct bcm47xx_board_type_list3 bcm47xx_
- {{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
- {{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
- {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
-- {{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
- { {0}, NULL},
- };
-
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -66,7 +66,7 @@ enum bcm47xx_board {
- BCM47XX_BOARD_LINKSYS_WRT310NV1,
- BCM47XX_BOARD_LINKSYS_WRT310NV2,
- BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
-- BCM47XX_BOARD_LINKSYS_WRT54GSV1,
-+ BCM47XX_BOARD_LINKSYS_WRT54G,
- BCM47XX_BOARD_LINKSYS_WRT610NV1,
- BCM47XX_BOARD_LINKSYS_WRT610NV2,
- BCM47XX_BOARD_LINKSYS_WRTSL54GS,
diff --git a/target/linux/brcm47xx/patches-3.10/140-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch b/target/linux/brcm47xx/patches-3.10/140-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch
deleted file mode 100644
index 94ead79..0000000
--- a/target/linux/brcm47xx/patches-3.10/140-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From e3d15471f1be2bd2fd4db82907ad4b2d74ec2636 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 10 Jan 2014 23:55:28 +0100
-Subject: [PATCH 4/6] MIPS: BCM47XX: add button and led configuration for some
- Linksys devices
-
-This adds led and button GPIO configuration for Linksys wrt54g3gv2,
-wrt54gsv1 and wrtsl54gs. This is based on OpenWrt broadcom-diag code.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/buttons.c | 27 +++++++++++++++++++++++++++
- arch/mips/bcm47xx/leds.c | 33 +++++++++++++++++++++++++++++++++
- 2 files changed, 60 insertions(+)
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -259,6 +259,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
- };
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_WIMAX),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_wrt610nv1[] __initconst = {
- BCM47XX_GPIO_KEY(6, KEY_RESTART),
- BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
-@@ -270,6 +282,12 @@ bcm47xx_buttons_linksys_wrt610nv2[] __in
- BCM47XX_GPIO_KEY(6, KEY_RESTART),
- };
-
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrtsl54gs[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
- /* Motorola */
-
- static const struct gpio_keys_button
-@@ -479,12 +497,21 @@ int __init bcm47xx_buttons_register(void
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRT54G:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT610NV1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
- break;
- case BCM47XX_BOARD_LINKSYS_WRT610NV2:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
-+ break;
-
- case BCM47XX_BOARD_MOTOROLA_WE800G:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -292,6 +292,21 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
- };
-
- static const struct gpio_led
-+bcm47xx_leds_linksys_wrt54gsv1[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt54g3gv2[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(2, "green", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -308,6 +323,15 @@ bcm47xx_leds_linksys_wrt610nv2[] __initc
- BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
-
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
- /* Motorola */
-
- static const struct gpio_led
-@@ -502,12 +526,21 @@ void __init bcm47xx_leds_register(void)
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRT54G:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT610NV1:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
- break;
- case BCM47XX_BOARD_LINKSYS_WRT610NV2:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
-+ break;
-
- case BCM47XX_BOARD_MOTOROLA_WE800G:
- bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
diff --git a/target/linux/brcm47xx/patches-3.10/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch b/target/linux/brcm47xx/patches-3.10/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch
deleted file mode 100644
index 9d19d41..0000000
--- a/target/linux/brcm47xx/patches-3.10/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From c546fa49901252cbc1e4046d7188858b2f9e130f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 10 Jan 2014 23:55:43 +0100
-Subject: [PATCH 2/2] MIPS: BCM47XX: add detection and GPIO config for Siemens
- SE505v2
-
-This adds board detection for the Siemens SE505v2 and the led gpio
-configuration. This board does not have any buttons.
-This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/board.c | 17 +++++++++++++++++
- arch/mips/bcm47xx/leds.c | 12 ++++++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 2 ++
- 3 files changed, 31 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -181,6 +181,13 @@ struct bcm47xx_board_type_list3 bcm47xx_
- { {0}, NULL},
- };
-
-+/* boardtype, boardrev */
-+static const
-+struct bcm47xx_board_type_list2 bcm47xx_board_list_board_type_rev[] __initconst = {
-+ {{BCM47XX_BOARD_SIEMENS_SE505V2, "Siemens SE505 V2"}, "0x0101", "0x10"},
-+ { {0}, NULL},
-+};
-+
- static const
- struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
- {BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
-@@ -274,6 +281,16 @@ static __init const struct bcm47xx_board
- return &e3->board;
- }
- }
-+
-+ if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
-+ bcm47xx_nvram_getenv("boardrev", buf2, sizeof(buf2)) >= 0 &&
-+ bcm47xx_nvram_getenv("boardnum", buf3, sizeof(buf3)) == -ENOENT) {
-+ for (e2 = bcm47xx_board_list_board_type_rev; e2->value1; e2++) {
-+ if (!strcmp(buf1, e2->value1) &&
-+ !strcmp(buf2, e2->value2))
-+ return &e2->board;
-+ }
-+ }
- return bcm47xx_board_unknown;
- }
-
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -383,6 +383,14 @@ bcm47xx_leds_netgear_wnr834bv2[] __initc
- BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
-
-+/* Siemens */
-+static const struct gpio_led
-+bcm47xx_leds_siemens_se505v2[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
- /* SimpleTech */
-
- static const struct gpio_led
-@@ -562,6 +570,10 @@ void __init bcm47xx_leds_register(void)
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
- break;
-
-+ case BCM47XX_BOARD_SIEMENS_SE505V2:
-+ bcm47xx_set_pdata(bcm47xx_leds_siemens_se505v2);
-+ break;
-+
- case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
- bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
- break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -94,6 +94,8 @@ enum bcm47xx_board {
-
- BCM47XX_BOARD_PHICOMM_M1,
-
-+ BCM47XX_BOARD_SIEMENS_SE505V2,
-+
- BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
-
- BCM47XX_BOARD_ZTE_H218N,
diff --git a/target/linux/brcm47xx/patches-3.10/142-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch b/target/linux/brcm47xx/patches-3.10/142-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch
deleted file mode 100644
index ff6c388..0000000
--- a/target/linux/brcm47xx/patches-3.10/142-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 44927df87162ae9beb6e7b934b0e75818b88e350 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 2 Jan 2014 19:10:05 +0100
-Subject: [PATCH] MIPS: BCM47XX: add Belkin F7Dxxxx board detection
-
-From: Cody P Schafer <devel@codyps.com>
-
-Add a few Belkin F7Dxxxx entries, with F7D4401 sourced from online
-documentation and the "F7D7302" being observed. F7D3301, F7D3302, and
-F7D4302 are reasonable guesses which are unlikely to cause
-mis-detection.
-
-Signed-off-by: Cody P Schafer <devel@codyps.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/board.c | 4 ++++
- arch/mips/bcm47xx/buttons.c | 4 ++++
- arch/mips/bcm47xx/leds.c | 4 ++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 4 ++++
- 4 files changed, 16 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -71,7 +71,11 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
- {{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
- {{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
-+ {{BCM47XX_BOARD_BELKIN_F7D3301, "Belkin F7D3301"}, "F7D3301"},
-+ {{BCM47XX_BOARD_BELKIN_F7D3302, "Belkin F7D3302"}, "F7D3302"},
- {{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
-+ {{BCM47XX_BOARD_BELKIN_F7D4302, "Belkin F7D4302"}, "F7D4302"},
-+ {{BCM47XX_BOARD_BELKIN_F7D4401, "Belkin F7D4401"}, "F7D4401"},
- { {0}, NULL},
- };
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -420,7 +420,11 @@ int __init bcm47xx_buttons_register(void
- err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd);
- break;
-
-+ case BCM47XX_BOARD_BELKIN_F7D3301:
-+ case BCM47XX_BOARD_BELKIN_F7D3302:
- case BCM47XX_BOARD_BELKIN_F7D4301:
-+ case BCM47XX_BOARD_BELKIN_F7D4302:
-+ case BCM47XX_BOARD_BELKIN_F7D4401:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301);
- break;
-
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -457,7 +457,11 @@ void __init bcm47xx_leds_register(void)
- bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd);
- break;
-
-+ case BCM47XX_BOARD_BELKIN_F7D3301:
-+ case BCM47XX_BOARD_BELKIN_F7D3302:
- case BCM47XX_BOARD_BELKIN_F7D4301:
-+ case BCM47XX_BOARD_BELKIN_F7D4302:
-+ case BCM47XX_BOARD_BELKIN_F7D4401:
- bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301);
- break;
-
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -27,7 +27,11 @@ enum bcm47xx_board {
- BCM47XX_BOARD_ASUS_WL700GE,
- BCM47XX_BOARD_ASUS_WLHDD,
-
-+ BCM47XX_BOARD_BELKIN_F7D3301,
-+ BCM47XX_BOARD_BELKIN_F7D3302,
- BCM47XX_BOARD_BELKIN_F7D4301,
-+ BCM47XX_BOARD_BELKIN_F7D4302,
-+ BCM47XX_BOARD_BELKIN_F7D4401,
-
- BCM47XX_BOARD_BUFFALO_WBR2_G54,
- BCM47XX_BOARD_BUFFALO_WHR2_A54G54,
diff --git a/target/linux/brcm47xx/patches-3.10/143-MIPS-BCM47XX-Check-all-32-GPIOs-when-looking-for-a-p.patch b/target/linux/brcm47xx/patches-3.10/143-MIPS-BCM47XX-Check-all-32-GPIOs-when-looking-for-a-p.patch
deleted file mode 100644
index 42ce9fe..0000000
--- a/target/linux/brcm47xx/patches-3.10/143-MIPS-BCM47XX-Check-all-32-GPIOs-when-looking-for-a-p.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 4fe2169acecb6e62821dfe14bc5c5852870b516f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 13 Feb 2014 17:48:12 +0100
-Subject: MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom boards support 32 GPIOs and NVRAM may have entires for higher
-ones too. Example:
-gpio23=wombo_reset
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: linux-mips@linux-mips.org
-Cc: Rafał Miłecki <zajec5@gmail.com>
-Patchwork: https://patchwork.linux-mips.org/patch/6547/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -197,7 +197,7 @@ int bcm47xx_nvram_gpio_pin(const char *n
- char nvram_var[10];
- char buf[30];
-
-- for (i = 0; i < 16; i++) {
-+ for (i = 0; i < 32; i++) {
- err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
- if (err <= 0)
- continue;
diff --git a/target/linux/brcm47xx/patches-3.10/144-make-reboot-more-reliable.patch b/target/linux/brcm47xx/patches-3.10/144-make-reboot-more-reliable.patch
deleted file mode 100644
index 50431de..0000000
--- a/target/linux/brcm47xx/patches-3.10/144-make-reboot-more-reliable.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 26db431400c336c4cc658cb4888bab18d254c64a Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 9 Aug 2014 00:00:09 +0200
-Subject: [PATCH] MIPS: BCM47XX: fix reboot problem on BCM4705/BCM4785
-
-This adds some code based on code from the Broadcom GPL tar to fix the
-reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
-times and have never seen a problem. This reverts the changes in the
-previous commit and adds the real fix as suggested by Rafał.
-
-Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
-async mode.
-
-The previous try was this:
-commit 316cad5c1d4daee998cd1f83ccdb437f6f20d45c
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon Jul 28 23:53:57 2014 +0200
-
- MIPS: BCM47XX: make reboot more relaiable
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -55,7 +55,16 @@ static void bcm47xx_machine_restart(char
- switch (bcm47xx_bus_type) {
- #ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
-+ if (bcm47xx_bus.ssb.chip_id == 0x4785)
-+ write_c0_diag4(1 << 22);
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
-+ if (bcm47xx_bus.ssb.chip_id == 0x4785) {
-+ __asm__ __volatile__(
-+ ".set\tmips3\n\t"
-+ "sync\n\t"
-+ "wait\n\t"
-+ ".set\tmips0");
-+ }
- break;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
diff --git a/target/linux/brcm47xx/patches-3.10/145-MIPS-BCM47XX-fixup-broken-MAC-addresses-in-nvram.patch b/target/linux/brcm47xx/patches-3.10/145-MIPS-BCM47XX-fixup-broken-MAC-addresses-in-nvram.patch
deleted file mode 100644
index 2ee5442..0000000
--- a/target/linux/brcm47xx/patches-3.10/145-MIPS-BCM47XX-fixup-broken-MAC-addresses-in-nvram.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 103c0bf3ff46486466bc9138d70c25133d516003 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 29 Jul 2014 00:08:01 +0200
-Subject: [PATCH] MIPS: BCM47XX: fixup broken MAC addresses in nvram
-
-The address prefix 00:90:4C is used by Broadcom in their initial
-configuration. When a mac address with the prefix 00:90:4C is used all
-devices from the same series are sharing the same mac address. To
-prevent mac address collisions we replace them with a mac address based
-on the base address. To generate such addresses we take the main mac
-address from et0macaddr and increase it by two for the first wifi
-device and by 3 for the second one. This matches the printed mac
-address on the device. The main mac address increased by one is used as
-wan address by the vendor code.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: zajec5@gmail.com
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/7489/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm47xx/sprom.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 48 insertions(+)
-
---- a/arch/mips/bcm47xx/sprom.c
-+++ b/arch/mips/bcm47xx/sprom.c
-@@ -28,6 +28,8 @@
-
- #include <bcm47xx.h>
- #include <bcm47xx_nvram.h>
-+#include <linux/if_ether.h>
-+#include <linux/etherdevice.h>
-
- static void create_key(const char *prefix, const char *postfix,
- const char *name, char *buf, int len)
-@@ -631,6 +633,33 @@ static void bcm47xx_fill_sprom_path_r45(
- }
- }
-
-+static bool bcm47xx_is_valid_mac(u8 *mac)
-+{
-+ return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c);
-+}
-+
-+static int bcm47xx_increase_mac_addr(u8 *mac, u8 num)
-+{
-+ u8 *oui = mac + ETH_ALEN/2 - 1;
-+ u8 *p = mac + ETH_ALEN - 1;
-+
-+ do {
-+ (*p) += num;
-+ if (*p > num)
-+ break;
-+ p--;
-+ num = 1;
-+ } while (p != oui);
-+
-+ if (p == oui) {
-+ pr_err("unable to fetch mac address\n");
-+ return -ENOENT;
-+ }
-+ return 0;
-+}
-+
-+static int mac_addr_used = 2;
-+
- static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
- {
-@@ -648,6 +677,25 @@ static void bcm47xx_fill_sprom_ethernet(
-
- nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
- nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
-+
-+ /* The address prefix 00:90:4C is used by Broadcom in their initial
-+ configuration. When a mac address with the prefix 00:90:4C is used
-+ all devices from the same series are sharing the same mac address.
-+ To prevent mac address collisions we replace them with a mac address
-+ based on the base address. */
-+ if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
-+ u8 mac[6];
-+
-+ nvram_read_macaddr(NULL, "et0macaddr", mac, false);
-+ if (bcm47xx_is_valid_mac(mac)) {
-+ int err = bcm47xx_increase_mac_addr(mac, mac_addr_used);
-+
-+ if (!err) {
-+ memcpy(sprom->il0mac, mac, ETH_ALEN);
-+ mac_addr_used++;
-+ }
-+ }
-+ }
- }
-
- static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
diff --git a/target/linux/brcm47xx/patches-3.10/146-MIPS-BCM47XX-add-Microsoft-MN-700-and-Asus-WL500G.patch b/target/linux/brcm47xx/patches-3.10/146-MIPS-BCM47XX-add-Microsoft-MN-700-and-Asus-WL500G.patch
deleted file mode 100644
index eee4b04..0000000
--- a/target/linux/brcm47xx/patches-3.10/146-MIPS-BCM47XX-add-Microsoft-MN-700-and-Asus-WL500G.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From 250dc03727b9cce91bd86091f05bf2443e2be9ec Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 29 Jul 2014 00:12:09 +0200
-Subject: [PATCH] MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500G
-
-This patch adds detection for the Microsoft MN-700 and the Asus WL500G
-router. This is based on some old code from OpenWrt.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: zajec5@gmail.com
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/7490/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm47xx/board.c | 17 +++++++++++++++++
- arch/mips/bcm47xx/buttons.c | 19 +++++++++++++++++++
- arch/mips/bcm47xx/leds.c | 19 +++++++++++++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 3 +++
- 4 files changed, 58 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -79,6 +79,14 @@ struct bcm47xx_board_type_list1 bcm47xx_
- { {0}, NULL},
- };
-
-+/* hardware_version, boardnum */
-+static const
-+struct bcm47xx_board_type_list2 bcm47xx_board_list_hw_version_num[] __initconst = {
-+ {{BCM47XX_BOARD_MICROSOFT_MN700, "Microsoft MN-700"}, "WL500-", "mn700"},
-+ {{BCM47XX_BOARD_ASUS_WL500G, "Asus WL500G"}, "WL500-", "asusX"},
-+ { {0}, NULL},
-+};
-+
- /* productid */
- static const
- struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
-@@ -236,6 +244,15 @@ static __init const struct bcm47xx_board
- }
- }
-
-+ if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0 &&
-+ bcm47xx_nvram_getenv("boardtype", buf2, sizeof(buf2)) >= 0) {
-+ for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
-+ if (!strstarts(buf1, e2->value1) &&
-+ !strcmp(buf2, e2->value2))
-+ return &e2->board;
-+ }
-+ }
-+
- if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
- for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
- if (!strcmp(buf1, e1->value1))
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -56,6 +56,11 @@ bcm47xx_buttons_asus_wl330ge[] __initcon
- };
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_asus_wl500g[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_asus_wl500gd[] __initconst = {
- BCM47XX_GPIO_KEY(6, KEY_RESTART),
- };
-@@ -288,6 +293,13 @@ bcm47xx_buttons_linksys_wrtsl54gs[] __in
- BCM47XX_GPIO_KEY(6, KEY_RESTART),
- };
-
-+/* Microsoft */
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_microsoft_nm700[] __initconst = {
-+ BCM47XX_GPIO_KEY(7, KEY_RESTART),
-+};
-+
- /* Motorola */
-
- static const struct gpio_keys_button
-@@ -395,6 +407,9 @@ int __init bcm47xx_buttons_register(void
- case BCM47XX_BOARD_ASUS_WL330GE:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge);
- break;
-+ case BCM47XX_BOARD_ASUS_WL500G:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500g);
-+ break;
- case BCM47XX_BOARD_ASUS_WL500GD:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd);
- break;
-@@ -517,6 +532,10 @@ int __init bcm47xx_buttons_register(void
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
- break;
-
-+ case BCM47XX_BOARD_MICROSOFT_MN700:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_microsoft_nm700);
-+ break;
-+
- case BCM47XX_BOARD_MOTOROLA_WE800G:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
- break;
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -64,6 +64,11 @@ bcm47xx_leds_asus_wl330ge[] __initconst
- };
-
- static const struct gpio_led
-+bcm47xx_leds_asus_wl500g[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_asus_wl500gd[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- };
-@@ -332,6 +337,13 @@ bcm47xx_leds_linksys_wrtsl54gs[] __initc
- BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- };
-
-+/* Microsoft */
-+
-+static const struct gpio_led
-+bcm47xx_leds_microsoft_nm700[] __initconst = {
-+ BCM47XX_GPIO_LED(6, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
- /* Motorola */
-
- static const struct gpio_led
-@@ -432,6 +444,9 @@ void __init bcm47xx_leds_register(void)
- case BCM47XX_BOARD_ASUS_WL330GE:
- bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge);
- break;
-+ case BCM47XX_BOARD_ASUS_WL500G:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500g);
-+ break;
- case BCM47XX_BOARD_ASUS_WL500GD:
- bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd);
- break;
-@@ -554,6 +569,10 @@ void __init bcm47xx_leds_register(void)
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
- break;
-
-+ case BCM47XX_BOARD_MICROSOFT_MN700:
-+ bcm47xx_set_pdata(bcm47xx_leds_microsoft_nm700);
-+ break;
-+
- case BCM47XX_BOARD_MOTOROLA_WE800G:
- bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
- break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -18,6 +18,7 @@ enum bcm47xx_board {
- BCM47XX_BOARD_ASUS_WL300G,
- BCM47XX_BOARD_ASUS_WL320GE,
- BCM47XX_BOARD_ASUS_WL330GE,
-+ BCM47XX_BOARD_ASUS_WL500G,
- BCM47XX_BOARD_ASUS_WL500GD,
- BCM47XX_BOARD_ASUS_WL500GPV1,
- BCM47XX_BOARD_ASUS_WL500GPV2,
-@@ -75,6 +76,8 @@ enum bcm47xx_board {
- BCM47XX_BOARD_LINKSYS_WRT610NV2,
- BCM47XX_BOARD_LINKSYS_WRTSL54GS,
-
-+ BCM47XX_BOARD_MICROSOFT_MN700,
-+
- BCM47XX_BOARD_MOTOROLA_WE800G,
- BCM47XX_BOARD_MOTOROLA_WR850GP,
- BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
diff --git a/target/linux/brcm47xx/patches-3.10/147-MIPS-BCM47xx-Distinguish-WRT54G-series-devices-by-bo.patch b/target/linux/brcm47xx/patches-3.10/147-MIPS-BCM47xx-Distinguish-WRT54G-series-devices-by-bo.patch
deleted file mode 100644
index 86a98f2..0000000
--- a/target/linux/brcm47xx/patches-3.10/147-MIPS-BCM47xx-Distinguish-WRT54G-series-devices-by-bo.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 41a867cb07443c77c24747dcbad1a40002516469 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 20 Jun 2014 07:56:39 +0200
-Subject: [PATCH] MIPS: BCM47xx: Distinguish WRT54G series devices by boardtype
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Catalin reported that GPIOs used by bcm47xx don't match layout of his
-WRT54GS V1.0 board. It seems we need to distinguish these 54G* devices.
-
-Reported-by: Catalin Patulea <cat@vv.carleton.ca>
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Patchwork: https://patchwork.linux-mips.org/patch/7112/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm47xx/board.c | 6 +++---
- arch/mips/bcm47xx/buttons.c | 10 ++++++----
- arch/mips/bcm47xx/leds.c | 10 ++++++----
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 4 +++-
- 4 files changed, 18 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -187,9 +187,9 @@ struct bcm47xx_board_type_list3 bcm47xx_
- {{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
- {{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
- {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
-- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
-- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
-- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
- { {0}, NULL},
- };
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -270,7 +270,7 @@ bcm47xx_buttons_linksys_wrt54g3gv2[] __i
- };
-
- static const struct gpio_keys_button
--bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = {
-+bcm47xx_buttons_linksys_wrt54g_generic[] __initconst = {
- BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
- BCM47XX_GPIO_KEY(6, KEY_RESTART),
- };
-@@ -516,12 +516,14 @@ int __init bcm47xx_buttons_register(void
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
- break;
-- case BCM47XX_BOARD_LINKSYS_WRT54G:
-- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1);
-- break;
- case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
-+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
-+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g_generic);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT610NV1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
- break;
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -297,7 +297,7 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
- };
-
- static const struct gpio_led
--bcm47xx_leds_linksys_wrt54gsv1[] __initconst = {
-+bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-@@ -553,12 +553,14 @@ void __init bcm47xx_leds_register(void)
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
- break;
-- case BCM47XX_BOARD_LINKSYS_WRT54G:
-- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1);
-- break;
- case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
-+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
-+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT610NV1:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
- break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -71,7 +71,9 @@ enum bcm47xx_board {
- BCM47XX_BOARD_LINKSYS_WRT310NV1,
- BCM47XX_BOARD_LINKSYS_WRT310NV2,
- BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
-- BCM47XX_BOARD_LINKSYS_WRT54G,
-+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
-+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
-+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708,
- BCM47XX_BOARD_LINKSYS_WRT610NV1,
- BCM47XX_BOARD_LINKSYS_WRT610NV2,
- BCM47XX_BOARD_LINKSYS_WRTSL54GS,
diff --git a/target/linux/brcm47xx/patches-3.10/148-MIPS-BCM47xx-Fix-LEDs-on-WRT54GS-V1.0.patch b/target/linux/brcm47xx/patches-3.10/148-MIPS-BCM47xx-Fix-LEDs-on-WRT54GS-V1.0.patch
deleted file mode 100644
index 181758e..0000000
--- a/target/linux/brcm47xx/patches-3.10/148-MIPS-BCM47xx-Fix-LEDs-on-WRT54GS-V1.0.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 7bb26b1691166d0d830c42c1a25caf82208bf90d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 20 Jun 2014 07:56:40 +0200
-Subject: [PATCH] MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Reported-by: Catalin Patulea <cat@vv.carleton.ca>
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: linux-mips@linux-mips.org
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Patchwork: https://patchwork.linux-mips.org/patch/7113/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm47xx/leds.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -311,6 +311,14 @@ bcm47xx_leds_linksys_wrt54g3gv2[] __init
- BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
-
-+/* Verified on: WRT54GS V1.0 */
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt54g_type_0101[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
- static const struct gpio_led
- bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
-@@ -557,6 +565,8 @@ void __init bcm47xx_leds_register(void)
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
- break;
- case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0101);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
- case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);
diff --git a/target/linux/brcm47xx/patches-3.10/149-MIPS-BCM47XX-Move-shared-symbols-to-the-config-BCM47.patch b/target/linux/brcm47xx/patches-3.10/149-MIPS-BCM47XX-Move-shared-symbols-to-the-config-BCM47.patch
deleted file mode 100644
index 59afdd4..0000000
--- a/target/linux/brcm47xx/patches-3.10/149-MIPS-BCM47XX-Move-shared-symbols-to-the-config-BCM47.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From c949c0bc55571209fe6742f645b1e2eb20099591 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 17 Jun 2014 16:36:50 +0200
-Subject: [PATCH 149/150] MIPS: BCM47XX: Move shared symbols to the config
- BCM47XX
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Patchwork: https://patchwork.linux-mips.org/patch/7100/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/Kconfig | 2 ++
- arch/mips/bcm47xx/Kconfig | 4 ----
- 2 files changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -119,6 +119,8 @@ config BCM47XX
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_HAS_EARLY_PRINTK
- select EARLY_PRINTK_8250 if EARLY_PRINTK
-+ select GPIOLIB
-+ select LEDS_GPIO_REGISTER
- help
- Support for BCM47XX based boards
-
---- a/arch/mips/bcm47xx/Kconfig
-+++ b/arch/mips/bcm47xx/Kconfig
-@@ -11,8 +11,6 @@ config BCM47XX_SSB
- select SSB_DRIVER_PCICORE if PCI
- select SSB_PCICORE_HOSTMODE if PCI
- select SSB_DRIVER_GPIO
-- select GPIOLIB
-- select LEDS_GPIO_REGISTER
- default y
- help
- Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
-@@ -29,8 +27,6 @@ config BCM47XX_BCMA
- select BCMA_HOST_PCI if PCI
- select BCMA_DRIVER_PCI_HOSTMODE if PCI
- select BCMA_DRIVER_GPIO
-- select GPIOLIB
-- select LEDS_GPIO_REGISTER
- default y
- help
- Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
diff --git a/target/linux/brcm47xx/patches-3.10/150-MIPS-BCM47XX-Select-SYS_SUPPORTS_HIGHMEM-for-BCM47XX.patch b/target/linux/brcm47xx/patches-3.10/150-MIPS-BCM47XX-Select-SYS_SUPPORTS_HIGHMEM-for-BCM47XX.patch
deleted file mode 100644
index 2fa4442..0000000
--- a/target/linux/brcm47xx/patches-3.10/150-MIPS-BCM47XX-Select-SYS_SUPPORTS_HIGHMEM-for-BCM47XX.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From ce01cbef8b0b71d01f8a68cba59da3198165bae6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 17 Jun 2014 16:36:51 +0200
-Subject: [PATCH 150/150] MIPS: BCM47XX: Select SYS_SUPPORTS_HIGHMEM for
- BCM47XX_BCMA
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems that bcm47xx can handle only 128 MiB of RAM directly. There
-are few devices with 256 MiB, but Broadcom's SDK uses highmem to handle
-anything above 128 MiB.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Patchwork: https://patchwork.linux-mips.org/patch/7101/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm47xx/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm47xx/Kconfig
-+++ b/arch/mips/bcm47xx/Kconfig
-@@ -20,6 +20,7 @@ config BCM47XX_SSB
- config BCM47XX_BCMA
- bool "BCMA Support for Broadcom BCM47XX"
- select SYS_HAS_CPU_MIPS32_R2
-+ select SYS_SUPPORTS_HIGHMEM
- select CPU_MIPSR2_IRQ_VI
- select BCMA
- select BCMA_HOST_SOC
diff --git a/target/linux/brcm47xx/patches-3.10/151-MIPS-BCM47XX-Devices-database-update-for-3.17.patch b/target/linux/brcm47xx/patches-3.10/151-MIPS-BCM47XX-Devices-database-update-for-3.17.patch
deleted file mode 100644
index 78846d4..0000000
--- a/target/linux/brcm47xx/patches-3.10/151-MIPS-BCM47XX-Devices-database-update-for-3.17.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From 9194b3431616567ffbf69ef970506d695912be0b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 17 Jul 2014 23:24:30 +0200
-Subject: [PATCH] MIPS: BCM47XX: Devices database update for 3.17
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Detect more devices and register leds & buttons for them.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/7394/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm47xx/board.c | 3 ++-
- arch/mips/bcm47xx/buttons.c | 9 ++++++++
- arch/mips/bcm47xx/leds.c | 53 +++++++++++++++++++++++++++++++++++++--------
- 3 files changed, 55 insertions(+), 10 deletions(-)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -57,6 +57,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- static const
- struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
- {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
-+ {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RTN10D"},
- {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
- {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
- {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
-@@ -105,7 +106,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- /* ModelId */
- static const
- struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
-- {{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"},
-+ {{BCM47XX_BOARD_DELL_TM2300, "Dell TrueMobile 2300"}, "WX-5565"},
- {{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
- {{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
- {{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -341,6 +341,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __i
- };
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
-+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
- BCM47XX_GPIO_KEY(6, KEY_RESTART),
- };
-@@ -557,6 +563,9 @@ int __init bcm47xx_buttons_register(void
- case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
- break;
-+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNR834BV2:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
- break;
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -35,6 +35,15 @@ bcm47xx_leds_asus_rtn12[] __initconst =
- };
-
- static const struct gpio_led
-+bcm47xx_leds_asus_rtn15u[] __initconst = {
-+ /* TODO: Add "wlan" LED */
-+ BCM47XX_GPIO_LED(3, "blue", "wan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(4, "blue", "lan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(9, "blue", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_asus_rtn16[] __initconst = {
- BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -42,8 +51,8 @@ bcm47xx_leds_asus_rtn16[] __initconst =
-
- static const struct gpio_led
- bcm47xx_leds_asus_rtn66u[] __initconst = {
-- BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-- BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(12, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(15, "blue", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
- };
-
- static const struct gpio_led
-@@ -221,8 +230,8 @@ bcm47xx_leds_linksys_e1000v1[] __initcon
-
- static const struct gpio_led
- bcm47xx_leds_linksys_e1000v21[] __initconst = {
-- BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-- BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(5, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
-@@ -319,6 +328,16 @@ bcm47xx_leds_linksys_wrt54g_type_0101[]
- BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- };
-
-+/* Verified on: WRT54GL V1.1 */
-+static const struct gpio_led
-+bcm47xx_leds_linksys_wrt54g_type_0467[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "green", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
- static const struct gpio_led
- bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
-@@ -338,11 +357,10 @@ bcm47xx_leds_linksys_wrt610nv2[] __initc
-
- static const struct gpio_led
- bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
-- BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-- BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-- BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-- BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-- BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(0, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
- };
-
- /* Microsoft */
-@@ -397,6 +415,15 @@ bcm47xx_leds_netgear_wndr4500v1[] __init
- };
-
- static const struct gpio_led
-+bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "green", "wan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
- BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -437,6 +464,9 @@ void __init bcm47xx_leds_register(void)
- case BCM47XX_BOARD_ASUS_RTN12:
- bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
- break;
-+ case BCM47XX_BOARD_ASUS_RTN15U:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn15u);
-+ break;
- case BCM47XX_BOARD_ASUS_RTN16:
- bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16);
- break;
-@@ -568,6 +598,8 @@ void __init bcm47xx_leds_register(void)
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0101);
- break;
- case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0467);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);
- break;
-@@ -601,6 +633,9 @@ void __init bcm47xx_leds_register(void)
- case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
- break;
-+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
-+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNR834BV2:
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
- break;
diff --git a/target/linux/brcm47xx/patches-3.10/152-Revert-MIPS-Delete-unused-function-add_temporary_ent.patch b/target/linux/brcm47xx/patches-3.10/152-Revert-MIPS-Delete-unused-function-add_temporary_ent.patch
deleted file mode 100644
index 8fb06b2..0000000
--- a/target/linux/brcm47xx/patches-3.10/152-Revert-MIPS-Delete-unused-function-add_temporary_ent.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From d377732c8c9aac14ccb900b65678558b0fb8f0f3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 17 Jul 2014 23:26:32 +0200
-Subject: [PATCH 152/153] Revert "MIPS: Delete unused function
- add_temporary_entry."
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit d7a887a73dec6c387b02a966a71aac767bbd9ce6.
-
-Function add_temporary_entry is needed by bcm47xx to support highmem. We
-need to add a temporary entry to check for amount of RAM.
-The only change made in this revert was replacing (ENTER|EXIT)_CRITICAL.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Patchwork: https://patchwork.linux-mips.org/patch/7395/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/include/asm/pgtable-32.h | 10 ++++++++
- arch/mips/mm/tlb-r4k.c | 47 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 57 insertions(+)
-
---- a/arch/mips/include/asm/pgtable-32.h
-+++ b/arch/mips/include/asm/pgtable-32.h
-@@ -19,6 +19,16 @@
- #include <asm-generic/pgtable-nopmd.h>
-
- /*
-+ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
-+ * starting at the top and working down. This is for populating the
-+ * TLB before trap_init() puts the TLB miss handler in place. It
-+ * should be used only for entries matching the actual page tables,
-+ * to prevent inconsistencies.
-+ */
-+extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
-+ unsigned long entryhi, unsigned long pagemask);
-+
-+/*
- * Basically we have the same two-level (which is the logical three level
- * Linux page table layout folded) page tables as the i386. Some day
- * when we have proper page coloring support we can have a 1% quicker
---- a/arch/mips/mm/tlb-r4k.c
-+++ b/arch/mips/mm/tlb-r4k.c
-@@ -389,6 +389,51 @@ int __init has_transparent_hugepage(void
-
- #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
-+/*
-+ * Used for loading TLB entries before trap_init() has started, when we
-+ * don't actually want to add a wired entry which remains throughout the
-+ * lifetime of the system
-+ */
-+
-+static int temp_tlb_entry __cpuinitdata;
-+
-+__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
-+ unsigned long entryhi, unsigned long pagemask)
-+{
-+ int ret = 0;
-+ unsigned long flags;
-+ unsigned long wired;
-+ unsigned long old_pagemask;
-+ unsigned long old_ctx;
-+
-+ local_irq_save(flags);
-+ /* Save old context and create impossible VPN2 value */
-+ old_ctx = read_c0_entryhi();
-+ old_pagemask = read_c0_pagemask();
-+ wired = read_c0_wired();
-+ if (--temp_tlb_entry < wired) {
-+ printk(KERN_WARNING
-+ "No TLB space left for add_temporary_entry\n");
-+ ret = -ENOSPC;
-+ goto out;
-+ }
-+
-+ write_c0_index(temp_tlb_entry);
-+ write_c0_pagemask(pagemask);
-+ write_c0_entryhi(entryhi);
-+ write_c0_entrylo0(entrylo0);
-+ write_c0_entrylo1(entrylo1);
-+ mtc0_tlbw_hazard();
-+ tlb_write_indexed();
-+ tlbw_use_hazard();
-+
-+ write_c0_entryhi(old_ctx);
-+ write_c0_pagemask(old_pagemask);
-+out:
-+ local_irq_restore(flags);
-+ return ret;
-+}
-+
- static int __cpuinitdata ntlb;
- static int __init set_ntlb(char *str)
- {
-@@ -426,6 +471,8 @@ void __cpuinit tlb_init(void)
- write_c0_pagegrain(pg);
- }
-
-+ temp_tlb_entry = current_cpu_data.tlbsize - 1;
-+
- /* From this point on the ARC firmware is dead. */
- local_flush_tlb_all();
-
diff --git a/target/linux/brcm47xx/patches-3.10/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch b/target/linux/brcm47xx/patches-3.10/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch
deleted file mode 100644
index ed5695d..0000000
--- a/target/linux/brcm47xx/patches-3.10/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From 6ee1d93455384cef8a0426effe85da241b525b63 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 17 Jul 2014 23:26:33 +0200
-Subject: [PATCH 153/153] MIPS: BCM47XX: Detect more then 128 MiB of RAM
- (HIGHMEM)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far BCM47XX can only detect amount of HIGHMEM. It still requires
-adding (registering) and well-testing before enabling by default.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/7396/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm47xx/bcm47xx_private.h | 3 ++
- arch/mips/bcm47xx/prom.c | 68 ++++++++++++++++++++++++++++++++++++-
- arch/mips/bcm47xx/setup.c | 3 ++
- arch/mips/include/asm/pgtable-32.h | 2 ++
- arch/mips/mm/tlb-r4k.c | 2 +-
- 5 files changed, 76 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/bcm47xx_private.h
-+++ b/arch/mips/bcm47xx/bcm47xx_private.h
-@@ -3,6 +3,9 @@
-
- #include <linux/kernel.h>
-
-+/* prom.c */
-+void __init bcm47xx_prom_highmem_init(void);
-+
- /* buttons.c */
- int __init bcm47xx_buttons_register(void);
-
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -51,6 +51,8 @@ __init void bcm47xx_set_system_type(u16
- chip_id);
- }
-
-+static unsigned long lowmem __initdata;
-+
- static __init void prom_init_mem(void)
- {
- unsigned long mem;
-@@ -84,6 +86,7 @@ static __init void prom_init_mem(void)
- if (!memcmp(prom_init, prom_init + mem, 32))
- break;
- }
-+ lowmem = mem;
-
- /* Ignoring the last page when ddr size is 128M. Cached
- * accesses to last page is causing the processor to prefetch
-@@ -92,7 +95,6 @@ static __init void prom_init_mem(void)
- */
- if (c->cputype == CPU_74K && (mem == (128 << 20)))
- mem -= 0x1000;
--
- add_memory_region(0, mem, BOOT_MEM_RAM);
- }
-
-@@ -111,3 +113,67 @@ void __init prom_init(void)
- void __init prom_free_prom_memory(void)
- {
- }
-+
-+#if defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM)
-+
-+#define EXTVBASE 0xc0000000
-+#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> _PFN_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6) | 1)
-+
-+#include <asm/tlbflush.h>
-+
-+/* Stripped version of tlb_init, with the call to build_tlb_refill_handler
-+ * dropped. Calling it at this stage causes a hang.
-+ */
-+void __cpuinit early_tlb_init(void)
-+{
-+ write_c0_pagemask(PM_DEFAULT_MASK);
-+ write_c0_wired(0);
-+ temp_tlb_entry = current_cpu_data.tlbsize - 1;
-+ local_flush_tlb_all();
-+}
-+
-+void __init bcm47xx_prom_highmem_init(void)
-+{
-+ unsigned long off = (unsigned long)prom_init;
-+ unsigned long extmem = 0;
-+ bool highmem_region = false;
-+
-+ if (WARN_ON(bcm47xx_bus_type != BCM47XX_BUS_TYPE_BCMA))
-+ return;
-+
-+ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
-+ highmem_region = true;
-+
-+ if (lowmem != 128 << 20 || !highmem_region)
-+ return;
-+
-+ early_tlb_init();
-+
-+ /* Add one temporary TLB entry to map SDRAM Region 2.
-+ * Physical Virtual
-+ * 0x80000000 0xc0000000 (1st: 256MB)
-+ * 0x90000000 0xd0000000 (2nd: 256MB)
-+ */
-+ add_temporary_entry(ENTRYLO(0x80000000),
-+ ENTRYLO(0x80000000 + (256 << 20)),
-+ EXTVBASE, PM_256M);
-+
-+ off = EXTVBASE + __pa(off);
-+ for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
-+ if (!memcmp(prom_init, (void *)(off + extmem), 16))
-+ break;
-+ }
-+ extmem -= lowmem;
-+
-+ early_tlb_init();
-+
-+ if (!extmem)
-+ return;
-+
-+ pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n",
-+ extmem >> 20);
-+
-+ /* TODO: Register extra memory */
-+}
-+
-+#endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -223,6 +223,9 @@ void __init plat_mem_setup(void)
- bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
- bcm47xx_register_bcma();
- bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
-+#ifdef CONFIG_HIGHMEM
-+ bcm47xx_prom_highmem_init();
-+#endif
- #endif
- } else {
- printk(KERN_INFO "bcm47xx: using ssb bus\n");
---- a/arch/mips/include/asm/pgtable-32.h
-+++ b/arch/mips/include/asm/pgtable-32.h
-@@ -18,6 +18,8 @@
-
- #include <asm-generic/pgtable-nopmd.h>
-
-+extern int temp_tlb_entry __cpuinitdata;
-+
- /*
- * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
- * starting at the top and working down. This is for populating the
---- a/arch/mips/mm/tlb-r4k.c
-+++ b/arch/mips/mm/tlb-r4k.c
-@@ -395,7 +395,7 @@ int __init has_transparent_hugepage(void
- * lifetime of the system
- */
-
--static int temp_tlb_entry __cpuinitdata;
-+int temp_tlb_entry __cpuinitdata;
-
- __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
diff --git a/target/linux/brcm47xx/patches-3.10/159-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.10/159-cpu_fixes.patch
deleted file mode 100644
index 984624a..0000000
--- a/target/linux/brcm47xx/patches-3.10/159-cpu_fixes.patch
+++ /dev/null
@@ -1,368 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -17,6 +17,20 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsmtregs.h>
-
-+#ifdef CONFIG_BCM47XX
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
- * This macro return a properly sign-extended address suitable as base address
- * for indexed cache operations. Two issues here:
-@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Index_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Invalidate_D, addr);
- __dflush_epilogue
- }
-@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
- */
- static inline void protected_flush_icache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- protected_cache_op(Hit_Invalidate_I, addr);
- }
-
-@@ -219,6 +237,7 @@ static inline void protected_flush_icach
- */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- protected_cache_op(Hit_Writeback_Inv_D, addr);
- }
-
-@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
- : "r" (base), \
- "i" (op));
-
-+static inline void blast_dcache(void)
-+{
-+ unsigned long start = KSEG0;
-+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+ unsigned long end = (start + dcache_size);
-+
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+
-+ BCM4710_FILL_TLB(start);
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Hit_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+ unsigned long ws_end = current_cpu_data.dcache.ways <<
-+ current_cpu_data.dcache.waybit;
-+ unsigned long ws, addr;
-+ for (ws = 0; ws < ws_end; ws += ws_inc) {
-+ start = page + ws;
-+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, addr);
-+ }
-+ }
-+}
-+
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
- static inline void blast_##pfx##cache##lsize(void) \
- { \
- unsigned long start = INDEX_BASE; \
-@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
- \
- __##pfx##flush_prologue \
- \
-+ war \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
- for (addr = start; addr < end; addr += lsize * 32) \
- cache##lsize##_unroll32(addr|ws, indexop); \
-@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
- \
- __##pfx##flush_prologue \
- \
-+ war \
- do { \
- cache##lsize##_unroll32(start, hitop); \
- start += lsize * 32; \
-@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
- current_cpu_data.desc.waybit; \
- unsigned long ws, addr; \
- \
-+ war \
-+ \
- __##pfx##flush_prologue \
- \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
-@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
- __##pfx##flush_epilogue \
- }
-
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
- static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
- unsigned long end) \
- { \
- unsigned long lsize = cpu_##desc##_line_size(); \
- unsigned long addr = start & ~(lsize - 1); \
- unsigned long aend = (end - 1) & ~(lsize - 1); \
-+ war \
- \
- __##pfx##flush_prologue \
- \
- while (1) { \
-+ war2 \
- prot##cache_op(hitop, addr); \
- if (addr == aend) \
- break; \
-@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
- __##pfx##flush_epilogue \
- }
-
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
-
- #endif /* _ASM_R4KCACHE_H */
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -449,6 +449,10 @@
- .macro RESTORE_SP_AND_RET
- LONG_L sp, PT_R29(sp)
- .set mips3
-+#ifdef CONFIG_BCM47XX
-+ nop
-+ nop
-+#endif
- eret
- .set mips0
- .endm
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -46,6 +46,10 @@
- NESTED(except_vec3_generic, 0, sp)
- .set push
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+ nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- mfc0 k0, CP0_INDEX
- #endif
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -35,6 +35,9 @@
- #include <asm/traps.h>
- #include <asm/dma-coherence.h>
-
-+/* For enabling BCM4710 cache workarounds */
-+int bcm4710 = 0;
-+
- /*
- * Special Variant of smp_call_function for use by cache functions:
- *
-@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page = blast_dcache_page;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_page = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_page_indexed = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -144,6 +153,9 @@ static void __cpuinit r4k_blast_dcache_s
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache = blast_dcache;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -674,6 +686,8 @@ static void local_r4k_flush_cache_sigtra
- unsigned long addr = (unsigned long) arg;
-
- R4600_HIT_CACHEOP_WAR_IMPL;
-+ BCM4710_PROTECTED_FILL_TLB(addr);
-+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
- if (dc_lsize)
- protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1357,6 +1371,17 @@ static void __cpuinit coherency_setup(vo
- * silly idea of putting something else there ...
- */
- switch (current_cpu_type()) {
-+ case CPU_BMIPS3300:
-+ {
-+ u32 cm;
-+ cm = read_c0_diag();
-+ /* Enable icache */
-+ cm |= (1 << 31);
-+ /* Enable dcache */
-+ cm |= (1 << 30);
-+ write_c0_diag(cm);
-+ }
-+ break;
- case CPU_R4000PC:
- case CPU_R4000SC:
- case CPU_R4000MC:
-@@ -1404,6 +1429,15 @@ void __cpuinit r4k_cache_init(void)
- extern void build_copy_page(void);
- struct cpuinfo_mips *c = &current_cpu_data;
-
-+ /* Check if special workarounds are required */
-+#ifdef CONFIG_BCM47XX
-+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+ printk("Enabling BCM4710A0 cache workarounds.\n");
-+ bcm4710 = 1;
-+ } else
-+#endif
-+ bcm4710 = 0;
-+
- probe_pcache();
- setup_scache();
-
-@@ -1469,6 +1503,14 @@ void __cpuinit r4k_cache_init(void)
- */
- local_r4k___flush_cache_all(NULL);
-
-+#ifdef CONFIG_BCM47XX
-+ {
-+ static void (*_coherency_setup)(void);
-+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+ _coherency_setup();
-+ }
-+#else
- coherency_setup();
-+#endif
- board_cache_error_setup = r4k_cache_error_setup;
- }
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -1311,6 +1311,9 @@ static void __cpuinit build_r4000_tlb_re
- /* No need for uasm_i_nop */
- }
-
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-@@ -1842,6 +1845,9 @@ build_r4000_tlbchange_handler_head(u32 *
- {
- struct work_registers wr = build_get_work_registers(p);
-
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
- #else
diff --git a/target/linux/brcm47xx/patches-3.10/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-3.10/160-kmap_coherent.patch
deleted file mode 100644
index 3c9f550..0000000
--- a/target/linux/brcm47xx/patches-3.10/160-kmap_coherent.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -120,6 +120,9 @@
- #ifndef cpu_has_local_ebase
- #define cpu_has_local_ebase 1
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
-
- /*
- * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
---- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -79,4 +79,6 @@
- #define cpu_scache_line_size() 0
- #define cpu_has_vz 0
-
-+#define cpu_use_kmap_coherent 0
-+
- #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -509,7 +509,7 @@ static inline void local_r4k_flush_cache
- */
- map_coherent = (cpu_has_dc_aliases &&
- page_mapped(page) && !Page_dcache_dirty(page));
-- if (map_coherent)
-+ if (map_coherent && cpu_use_kmap_coherent)
- vaddr = kmap_coherent(page, addr);
- else
- vaddr = kmap_atomic(page);
-@@ -532,7 +532,7 @@ static inline void local_r4k_flush_cache
- }
-
- if (vaddr) {
-- if (map_coherent)
-+ if (map_coherent && cpu_use_kmap_coherent)
- kunmap_coherent();
- else
- kunmap_atomic(vaddr);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -203,7 +203,7 @@ void copy_user_highpage(struct page *to,
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
-@@ -225,7 +225,7 @@ void copy_to_user_page(struct vm_area_st
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(page) && !Page_dcache_dirty(page)) {
- void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(vto, src, len);
-@@ -243,7 +243,7 @@ void copy_from_user_page(struct vm_area_
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(page) && !Page_dcache_dirty(page)) {
- void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(dst, vfrom, len);
diff --git a/target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch b/target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch
deleted file mode 100644
index 2cdd887..0000000
--- a/target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From fb143ba7f7cd215bc2fc34a478c4c0b6dc56e537 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 6 Jan 2014 14:51:59 +0100
-Subject: [PATCH] MIPS: BCM47XX: fix position of cpu_wait disabling
-
-The disabling of cpu_wait was done too early, before the detection was
-done. This moves the code to a position where it actually works.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
----
- arch/mips/bcm47xx/setup.c | 34 +++++++++++++++++++++++++---------
- 1 file changed, 25 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -37,6 +37,7 @@
- #include <asm/prom.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-+#include <asm/idle.h>
- #include <bcm47xx.h>
- #include <bcm47xx_nvram.h>
- #include <bcm47xx_board.h>
-@@ -243,6 +244,31 @@ void __init plat_mem_setup(void)
- mips_set_machine_name(bcm47xx_board_get_name());
- }
-
-+static int __init bcm47xx_cpu_fixes(void)
-+{
-+ switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+ case BCM47XX_BUS_TYPE_SSB:
-+ /* Nothing to do */
-+ break;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ /* The BCM4706 has a problem with the CPU wait instruction.
-+ * When r4k_wait or r4k_wait_irqoff is used will just hang and
-+ * not return from a msleep(). Removing the cpu_wait
-+ * functionality is a workaround for this problem. The BCM4716
-+ * does not have this problem.
-+ */
-+ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
-+ cpu_wait = NULL;
-+ break;
-+#endif
-+ }
-+ return 0;
-+}
-+arch_initcall(bcm47xx_cpu_fixes);
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- switch (bcm47xx_bus_type) {
diff --git a/target/linux/brcm47xx/patches-3.10/200-b44-add-support-for-Byte-Queue-Limits.patch b/target/linux/brcm47xx/patches-3.10/200-b44-add-support-for-Byte-Queue-Limits.patch
deleted file mode 100644
index 127c984..0000000
--- a/target/linux/brcm47xx/patches-3.10/200-b44-add-support-for-Byte-Queue-Limits.patch
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -596,6 +596,7 @@ static void b44_timer(unsigned long __op
- static void b44_tx(struct b44 *bp)
- {
- u32 cur, cons;
-+ unsigned bytes_compl = 0, pkts_compl = 0;
-
- cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK;
- cur /= sizeof(struct dma_desc);
-@@ -612,9 +613,14 @@ static void b44_tx(struct b44 *bp)
- skb->len,
- DMA_TO_DEVICE);
- rp->skb = NULL;
-+
-+ bytes_compl += skb->len;
-+ pkts_compl++;
-+
- dev_kfree_skb_irq(skb);
- }
-
-+ netdev_completed_queue(bp->dev, pkts_compl, bytes_compl);
- bp->tx_cons = cons;
- if (netif_queue_stopped(bp->dev) &&
- TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH)
-@@ -1018,6 +1024,8 @@ static netdev_tx_t b44_start_xmit(struct
- if (bp->flags & B44_FLAG_REORDER_BUG)
- br32(bp, B44_DMATX_PTR);
-
-+ netdev_sent_queue(dev, skb->len);
-+
- if (TX_BUFFS_AVAIL(bp) < 1)
- netif_stop_queue(dev);
-
-@@ -1416,6 +1424,8 @@ static void b44_init_hw(struct b44 *bp,
-
- val = br32(bp, B44_ENET_CTRL);
- bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
-+
-+ netdev_reset_queue(bp->dev);
- }
-
- static int b44_open(struct net_device *dev)
diff --git a/target/linux/brcm47xx/patches-3.10/201-b44-check-register-instead-of-PHY-address-to-detect-.patch b/target/linux/brcm47xx/patches-3.10/201-b44-check-register-instead-of-PHY-address-to-detect-.patch
deleted file mode 100644
index a9b3fa8..0000000
--- a/target/linux/brcm47xx/patches-3.10/201-b44-check-register-instead-of-PHY-address-to-detect-.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From d61941952d5e7d062c3884e6d81bd503a37702b4 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 20 Dec 2013 02:16:06 +0100
-Subject: [PATCH 201/208] b44: check register instead of PHY address to detect
- external PHY
-
-The Ethernet core supported by b44 supports an internal PHY integrated
-into the mac core, which is supported by the b44 driver and an external
-PHY to which the mac core is connected. This external PHY could be a
-switch connected through MII, which is often the case when this core is
-used on home routers. The usage of an external PHY was assumed when the
-PHY address 30 was used and an internal PHY was assumed when the PHY
-address was different. To verify that b44_phy_reset() was called and
-checked if it worked, otherwise PHY address 30 was assumed, an external
-PHY. It is better to check the register which says which PHY is
-connected to the MAC instead of checking the PHY address.
-The interface to an external PHY was only activated when this register
-was set.
-
-This also changes B44_FLAG_INTERNAL_PHY to B44_FLAG_EXTERNAL_PHY, it is
-easier to check.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/b44.c | 18 +++++++++---------
- drivers/net/ethernet/broadcom/b44.h | 2 +-
- 2 files changed, 10 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -284,7 +284,7 @@ static int __b44_writephy(struct b44 *bp
-
- static inline int b44_readphy(struct b44 *bp, int reg, u32 *val)
- {
-- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- return 0;
-
- return __b44_readphy(bp, bp->phy_addr, reg, val);
-@@ -292,7 +292,7 @@ static inline int b44_readphy(struct b44
-
- static inline int b44_writephy(struct b44 *bp, int reg, u32 val)
- {
-- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- return 0;
-
- return __b44_writephy(bp, bp->phy_addr, reg, val);
-@@ -321,7 +321,7 @@ static int b44_phy_reset(struct b44 *bp)
- u32 val;
- int err;
-
-- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- return 0;
- err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
- if (err)
-@@ -423,7 +423,7 @@ static int b44_setup_phy(struct b44 *bp)
-
- b44_wap54g10_workaround(bp);
-
-- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- return 0;
- if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
- goto out;
-@@ -521,7 +521,7 @@ static void b44_check_phy(struct b44 *bp
- {
- u32 bmsr, aux;
-
-- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
- bp->flags |= B44_FLAG_100_BASE_T;
- bp->flags |= B44_FLAG_FULL_DUPLEX;
- if (!netif_carrier_ok(bp->dev)) {
-@@ -1315,7 +1315,7 @@ static void b44_chip_reset(struct b44 *b
- if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
- bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
- br32(bp, B44_ENET_CTRL);
-- bp->flags &= ~B44_FLAG_INTERNAL_PHY;
-+ bp->flags |= B44_FLAG_EXTERNAL_PHY;
- } else {
- u32 val = br32(bp, B44_DEVCTRL);
-
-@@ -1324,7 +1324,7 @@ static void b44_chip_reset(struct b44 *b
- br32(bp, B44_DEVCTRL);
- udelay(100);
- }
-- bp->flags |= B44_FLAG_INTERNAL_PHY;
-+ bp->flags &= ~B44_FLAG_EXTERNAL_PHY;
- }
- }
-
-@@ -1828,8 +1828,8 @@ static int b44_get_settings(struct net_d
- DUPLEX_FULL : DUPLEX_HALF;
- cmd->port = 0;
- cmd->phy_address = bp->phy_addr;
-- cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
-- XCVR_INTERNAL : XCVR_EXTERNAL;
-+ cmd->transceiver = (bp->flags & B44_FLAG_EXTERNAL_PHY) ?
-+ XCVR_EXTERNAL : XCVR_INTERNAL;
- cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
- AUTONEG_DISABLE : AUTONEG_ENABLE;
- if (cmd->autoneg == AUTONEG_ENABLE)
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -376,7 +376,7 @@ struct b44 {
- #define B44_FLAG_ADV_10FULL 0x02000000
- #define B44_FLAG_ADV_100HALF 0x04000000
- #define B44_FLAG_ADV_100FULL 0x08000000
--#define B44_FLAG_INTERNAL_PHY 0x10000000
-+#define B44_FLAG_EXTERNAL_PHY 0x10000000
- #define B44_FLAG_RX_RING_HACK 0x20000000
- #define B44_FLAG_TX_RING_HACK 0x40000000
- #define B44_FLAG_WOL_ENABLE 0x80000000
diff --git a/target/linux/brcm47xx/patches-3.10/202-b44-rename-B44_PHY_ADDR_NO_PHY-to-B44_PHY_ADDR_NO_LO.patch b/target/linux/brcm47xx/patches-3.10/202-b44-rename-B44_PHY_ADDR_NO_PHY-to-B44_PHY_ADDR_NO_LO.patch
deleted file mode 100644
index a1ae7f4..0000000
--- a/target/linux/brcm47xx/patches-3.10/202-b44-rename-B44_PHY_ADDR_NO_PHY-to-B44_PHY_ADDR_NO_LO.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 5ab6329c5224d8135d76da18066edf3395f679f5 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 20 Dec 2013 02:16:07 +0100
-Subject: [PATCH 202/208] b44: rename B44_PHY_ADDR_NO_PHY to
- B44_PHY_ADDR_NO_LOCAL_PHY
-
-The PHY address 30 means there is no local PHY, but there could be an
-external PHY like a switch connected via MII. This is the case on most
-embedded home routers where this driver is used.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/b44.c | 2 +-
- drivers/net/ethernet/broadcom/b44.h | 6 +++---
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -2238,7 +2238,7 @@ static int b44_init_one(struct ssb_devic
-
- /* do a phy reset to test if there is an active phy */
- if (b44_phy_reset(bp) < 0)
-- bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-
- netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr);
-
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -280,9 +280,9 @@ struct ring_info {
- dma_addr_t mapping;
- };
-
--#define B44_MCAST_TABLE_SIZE 32
--#define B44_PHY_ADDR_NO_PHY 30
--#define B44_MDC_RATIO 5000000
-+#define B44_MCAST_TABLE_SIZE 32
-+#define B44_PHY_ADDR_NO_LOCAL_PHY 30 /* no local phy regs */
-+#define B44_MDC_RATIO 5000000
-
- #define B44_STAT_REG_DECLARE \
- _B44(tx_good_octets) \
diff --git a/target/linux/brcm47xx/patches-3.10/203-b44-abort-when-no-PHY-is-available-at-all.patch b/target/linux/brcm47xx/patches-3.10/203-b44-abort-when-no-PHY-is-available-at-all.patch
deleted file mode 100644
index 8ed078a..0000000
--- a/target/linux/brcm47xx/patches-3.10/203-b44-abort-when-no-PHY-is-available-at-all.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 7befa6abe09c84269b8af614a166409090346cf8 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 20 Dec 2013 02:16:08 +0100
-Subject: [PATCH 203/208] b44: abort when no PHY is available at all
-
-When the phy address is 31, this means that there is no PHY connected
-to this MAC at all, no internal and no external PHY. Reading these PHY
-registers causes a system reset on some routers.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/b44.c | 6 ++++++
- drivers/net/ethernet/broadcom/b44.h | 1 +
- 2 files changed, 7 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -2207,6 +2207,12 @@ static int b44_init_one(struct ssb_devic
- goto err_out_powerdown;
- }
-
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
-+ dev_err(sdev->dev, "No PHY present on this MAC, aborting\n");
-+ err = -ENODEV;
-+ goto err_out_powerdown;
-+ }
-+
- bp->mii_if.dev = dev;
- bp->mii_if.mdio_read = b44_mii_read;
- bp->mii_if.mdio_write = b44_mii_write;
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -282,6 +282,7 @@ struct ring_info {
-
- #define B44_MCAST_TABLE_SIZE 32
- #define B44_PHY_ADDR_NO_LOCAL_PHY 30 /* no local phy regs */
-+#define B44_PHY_ADDR_NO_PHY 31 /* no phy present at all */
- #define B44_MDC_RATIO 5000000
-
- #define B44_STAT_REG_DECLARE \
diff --git a/target/linux/brcm47xx/patches-3.10/204-b44-rename-b44_mii_-read-write-to-b44_mdio_-read-wri.patch b/target/linux/brcm47xx/patches-3.10/204-b44-rename-b44_mii_-read-write-to-b44_mdio_-read-wri.patch
deleted file mode 100644
index 09e3315..0000000
--- a/target/linux/brcm47xx/patches-3.10/204-b44-rename-b44_mii_-read-write-to-b44_mdio_-read-wri.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 348baa6c81cf774811040e4da01438d077a08301 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 20 Dec 2013 02:16:09 +0100
-Subject: [PATCH 204/208] b44: rename b44_mii_{read, write} to b44_mdio_{read,
- write}_mii
-
-The next patch will add these functions for phylib, and we should
-rename the old ones before. This now indicates that these functions are
-used for the mdio registers and on the mii interface.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/b44.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -299,7 +299,7 @@ static inline int b44_writephy(struct b4
- }
-
- /* miilib interface */
--static int b44_mii_read(struct net_device *dev, int phy_id, int location)
-+static int b44_mdio_read_mii(struct net_device *dev, int phy_id, int location)
- {
- u32 val;
- struct b44 *bp = netdev_priv(dev);
-@@ -309,8 +309,8 @@ static int b44_mii_read(struct net_devic
- return val;
- }
-
--static void b44_mii_write(struct net_device *dev, int phy_id, int location,
-- int val)
-+static void b44_mdio_write_mii(struct net_device *dev, int phy_id, int location,
-+ int val)
- {
- struct b44 *bp = netdev_priv(dev);
- __b44_writephy(bp, phy_id, location, val);
-@@ -2214,8 +2214,8 @@ static int b44_init_one(struct ssb_devic
- }
-
- bp->mii_if.dev = dev;
-- bp->mii_if.mdio_read = b44_mii_read;
-- bp->mii_if.mdio_write = b44_mii_write;
-+ bp->mii_if.mdio_read = b44_mdio_read_mii;
-+ bp->mii_if.mdio_write = b44_mdio_write_mii;
- bp->mii_if.phy_id = bp->phy_addr;
- bp->mii_if.phy_id_mask = 0x1f;
- bp->mii_if.reg_num_mask = 0x1f;
diff --git a/target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch b/target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch
deleted file mode 100644
index 82fd965..0000000
--- a/target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch
+++ /dev/null
@@ -1,332 +0,0 @@
-From 86f4ea63e696db996f68d1065b55506e75a7d765 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 20 Dec 2013 02:16:10 +0100
-Subject: [PATCH 205/208] b44: add phylib support
-
-Most of the older home routers based on the Broadcom BCM47XX SoC series
-are using a MAC that is supported by b44. On most of these routers not
-the internal PHY of this MAC core is used, but a switch sometimes on an
-external chip or integrated into the same SoC as the Ethernet core.
-For this switch a special PHY driver is needed which should not be
-integrated into b44 as the same switches are also used by other
-Broadcom home networking SoCs which are using different Ethernet MAC
-drivers. This was tested with the b53 switch driver which is currently
-on its way to mainline.
-
-If the internal PHY is not used, b44 will now search on the MDIO bus
-for a phy and use the Linux phylib subsystem to register a driver.
-Support for the internal PHY must stay here, because there are some
-device which are suing the internal phy.
-
-With this patch we scan the mdio bus when the sprom or nvram says that
-the PHY address is 30, if a PHY was found at this address b44 uses it.
-
-This was tested with a BCM4704, BCM4712 and BCM5354.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/Kconfig | 1 +
- drivers/net/ethernet/broadcom/b44.c | 190 ++++++++++++++++++++++++++++++++-
- drivers/net/ethernet/broadcom/b44.h | 3 +
- 3 files changed, 189 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -24,6 +24,7 @@ config B44
- select SSB
- select NET_CORE
- select MII
-+ select PHYLIB
- ---help---
- If you have a network (Ethernet) controller of this type, say Y
- or M and read the Ethernet-HOWTO, available from
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -6,6 +6,7 @@
- * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
- * Copyright (C) 2006 Broadcom Corporation.
- * Copyright (C) 2007 Michael Buesch <m@bues.ch>
-+ * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Distribute under GPL.
- */
-@@ -29,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/ssb/ssb.h>
- #include <linux/slab.h>
-+#include <linux/phy.h>
-
- #include <asm/uaccess.h>
- #include <asm/io.h>
-@@ -316,6 +318,23 @@ static void b44_mdio_write_mii(struct ne
- __b44_writephy(bp, phy_id, location, val);
- }
-
-+static int b44_mdio_read_phylib(struct mii_bus *bus, int phy_id, int location)
-+{
-+ u32 val;
-+ struct b44 *bp = bus->priv;
-+ int rc = __b44_readphy(bp, phy_id, location, &val);
-+ if (rc)
-+ return 0xffffffff;
-+ return val;
-+}
-+
-+static int b44_mdio_write_phylib(struct mii_bus *bus, int phy_id, int location,
-+ u16 val)
-+{
-+ struct b44 *bp = bus->priv;
-+ return __b44_writephy(bp, phy_id, location, val);
-+}
-+
- static int b44_phy_reset(struct b44 *bp)
- {
- u32 val;
-@@ -523,10 +542,12 @@ static void b44_check_phy(struct b44 *bp
-
- if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
- bp->flags |= B44_FLAG_100_BASE_T;
-- bp->flags |= B44_FLAG_FULL_DUPLEX;
- if (!netif_carrier_ok(bp->dev)) {
- u32 val = br32(bp, B44_TX_CTRL);
-- val |= TX_CTRL_DUPLEX;
-+ if (bp->flags & B44_FLAG_FULL_DUPLEX)
-+ val |= TX_CTRL_DUPLEX;
-+ else
-+ val &= ~TX_CTRL_DUPLEX;
- bw32(bp, B44_TX_CTRL, val);
- netif_carrier_on(bp->dev);
- b44_link_report(bp);
-@@ -1805,6 +1826,11 @@ static int b44_get_settings(struct net_d
- {
- struct b44 *bp = netdev_priv(dev);
-
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
-+ BUG_ON(!bp->phydev);
-+ return phy_ethtool_gset(bp->phydev, cmd);
-+ }
-+
- cmd->supported = (SUPPORTED_Autoneg);
- cmd->supported |= (SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
-@@ -1846,7 +1872,23 @@ static int b44_get_settings(struct net_d
- static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct b44 *bp = netdev_priv(dev);
-- u32 speed = ethtool_cmd_speed(cmd);
-+ u32 speed;
-+ int ret;
-+
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
-+ BUG_ON(!bp->phydev);
-+ spin_lock_irq(&bp->lock);
-+ if (netif_running(dev))
-+ b44_setup_phy(bp);
-+
-+ ret = phy_ethtool_sset(bp->phydev, cmd);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ return ret;
-+ }
-+
-+ speed = ethtool_cmd_speed(cmd);
-
- /* We do not support gigabit. */
- if (cmd->autoneg == AUTONEG_ENABLE) {
-@@ -2076,7 +2118,6 @@ static const struct ethtool_ops b44_etht
-
- static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
-- struct mii_ioctl_data *data = if_mii(ifr);
- struct b44 *bp = netdev_priv(dev);
- int err = -EINVAL;
-
-@@ -2084,7 +2125,12 @@ static int b44_ioctl(struct net_device *
- goto out;
-
- spin_lock_irq(&bp->lock);
-- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
-+ BUG_ON(!bp->phydev);
-+ err = phy_mii_ioctl(bp->phydev, ifr, cmd);
-+ } else {
-+ err = generic_mii_ioctl(&bp->mii_if, if_mii(ifr), cmd, NULL);
-+ }
- spin_unlock_irq(&bp->lock);
- out:
- return err;
-@@ -2146,6 +2192,127 @@ static const struct net_device_ops b44_n
- #endif
- };
-
-+static void b44_adjust_link(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct phy_device *phydev = bp->phydev;
-+ bool status_changed = 0;
-+
-+ BUG_ON(!phydev);
-+
-+ if (bp->old_link != phydev->link) {
-+ status_changed = 1;
-+ bp->old_link = phydev->link;
-+ }
-+
-+ /* reflect duplex change */
-+ if (phydev->link) {
-+ if ((phydev->duplex == DUPLEX_HALF) &&
-+ (bp->flags & B44_FLAG_FULL_DUPLEX)) {
-+ status_changed = 1;
-+ bp->flags &= ~B44_FLAG_FULL_DUPLEX;
-+ } else if ((phydev->duplex == DUPLEX_FULL) &&
-+ !(bp->flags & B44_FLAG_FULL_DUPLEX)) {
-+ status_changed = 1;
-+ bp->flags |= B44_FLAG_FULL_DUPLEX;
-+ }
-+ }
-+
-+ if (status_changed) {
-+ b44_check_phy(bp);
-+ phy_print_status(phydev);
-+ }
-+}
-+
-+static int b44_register_phy_one(struct b44 *bp)
-+{
-+ struct mii_bus *mii_bus;
-+ struct ssb_device *sdev = bp->sdev;
-+ struct phy_device *phydev;
-+ char bus_id[MII_BUS_ID_SIZE + 3];
-+ int err;
-+
-+ mii_bus = mdiobus_alloc();
-+ if (!mii_bus) {
-+ dev_err(sdev->dev, "mdiobus_alloc() failed\n");
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
-+
-+ mii_bus->priv = bp;
-+ mii_bus->read = b44_mdio_read_phylib;
-+ mii_bus->write = b44_mdio_write_phylib;
-+ mii_bus->name = "b44_eth_mii";
-+ mii_bus->parent = sdev->dev;
-+ mii_bus->phy_mask = ~(1 << bp->phy_addr);
-+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%x", instance);
-+ mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-+ if (!mii_bus->irq) {
-+ dev_err(sdev->dev, "mii_bus irq allocation failed\n");
-+ err = -ENOMEM;
-+ goto err_out_mdiobus;
-+ }
-+
-+ memset(mii_bus->irq, PHY_POLL, sizeof(int) * PHY_MAX_ADDR);
-+
-+ bp->mii_bus = mii_bus;
-+
-+ err = mdiobus_register(mii_bus);
-+ if (err) {
-+ dev_err(sdev->dev, "failed to register MII bus\n");
-+ goto err_out_mdiobus_irq;
-+ }
-+
-+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id, bp->phy_addr);
-+
-+ phydev = phy_connect(bp->dev, bus_id, &b44_adjust_link,
-+ PHY_INTERFACE_MODE_MII);
-+ if (IS_ERR(phydev)) {
-+ dev_err(sdev->dev, "could not attach PHY at %i\n",
-+ bp->phy_addr);
-+ err = PTR_ERR(phydev);
-+ goto err_out_mdiobus_unregister;
-+ }
-+
-+ /* mask with MAC supported features */
-+ phydev->supported &= (SUPPORTED_100baseT_Half |
-+ SUPPORTED_100baseT_Full |
-+ SUPPORTED_Autoneg |
-+ SUPPORTED_MII);
-+ phydev->advertising = phydev->supported;
-+
-+ bp->phydev = phydev;
-+ bp->old_link = 0;
-+ bp->phy_addr = phydev->addr;
-+
-+ dev_info(sdev->dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
-+ phydev->drv->name, dev_name(&phydev->dev));
-+
-+ return 0;
-+
-+err_out_mdiobus_unregister:
-+ mdiobus_unregister(mii_bus);
-+
-+err_out_mdiobus_irq:
-+ kfree(mii_bus->irq);
-+
-+err_out_mdiobus:
-+ mdiobus_free(mii_bus);
-+
-+err_out:
-+ return err;
-+}
-+
-+static void b44_unregister_phy_one(struct b44 *bp)
-+{
-+ struct mii_bus *mii_bus = bp->mii_bus;
-+
-+ phy_disconnect(bp->phydev);
-+ mdiobus_unregister(mii_bus);
-+ kfree(mii_bus->irq);
-+ mdiobus_free(mii_bus);
-+}
-+
- static int b44_init_one(struct ssb_device *sdev,
- const struct ssb_device_id *ent)
- {
-@@ -2246,10 +2413,20 @@ static int b44_init_one(struct ssb_devic
- if (b44_phy_reset(bp) < 0)
- bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
-+ err = b44_register_phy_one(bp);
-+ if (err) {
-+ dev_err(sdev->dev, "Cannot register PHY, aborting\n");
-+ goto err_out_unregister_netdev;
-+ }
-+ }
-+
- netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr);
-
- return 0;
-
-+err_out_unregister_netdev:
-+ unregister_netdev(dev);
- err_out_powerdown:
- ssb_bus_may_powerdown(sdev->bus);
-
-@@ -2263,8 +2440,11 @@ out:
- static void b44_remove_one(struct ssb_device *sdev)
- {
- struct net_device *dev = ssb_get_drvdata(sdev);
-+ struct b44 *bp = netdev_priv(dev);
-
- unregister_netdev(dev);
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
-+ b44_unregister_phy_one(bp);
- ssb_device_disable(sdev, 0);
- ssb_bus_may_powerdown(sdev->bus);
- free_netdev(dev);
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -397,6 +397,9 @@ struct b44 {
- u32 tx_pending;
- u8 phy_addr;
- u8 force_copybreak;
-+ struct phy_device *phydev;
-+ struct mii_bus *mii_bus;
-+ int old_link;
- struct mii_if_info mii_if;
- };
-
diff --git a/target/linux/brcm47xx/patches-3.10/206-b44-activate-PHY-when-MAC-is-off.patch b/target/linux/brcm47xx/patches-3.10/206-b44-activate-PHY-when-MAC-is-off.patch
deleted file mode 100644
index 57212bb..0000000
--- a/target/linux/brcm47xx/patches-3.10/206-b44-activate-PHY-when-MAC-is-off.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From bea69c47f5b93b3142f8833f8a34b666d5d7d6a7 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 20 Dec 2013 02:16:11 +0100
-Subject: [PATCH 206/208] b44: activate PHY when MAC is off
-
-Without this patch we can not access the PHY when the MAC is switched
-off. This PHY access is needed to configure the switch, which is done
-through PHY registers.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/b44.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -1360,7 +1360,10 @@ static void b44_halt(struct b44 *bp)
- bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN);
- /* now reset the chip, but without enabling the MAC&PHY
- * part of it. This has to be done _after_ we shut down the PHY */
-- b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
-+ b44_chip_reset(bp, B44_CHIP_RESET_FULL);
-+ else
-+ b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
- }
-
- /* bp->lock is held. */
diff --git a/target/linux/brcm47xx/patches-3.10/207-b44-do-not-set-PHY-address-to-30-for-every-ext-PHY.patch b/target/linux/brcm47xx/patches-3.10/207-b44-do-not-set-PHY-address-to-30-for-every-ext-PHY.patch
deleted file mode 100644
index d4eda98..0000000
--- a/target/linux/brcm47xx/patches-3.10/207-b44-do-not-set-PHY-address-to-30-for-every-ext-PHY.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 656a7c2b1210deddf76444ecc76e058c0404ce80 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 20 Dec 2013 02:16:12 +0100
-Subject: [PATCH 207/208] b44: do not set PHY address to 30 for every ext PHY
-
-b44_phy_reset() will fail for an external PHY and only work with the
-internal PHY, this was an old workaround when the detection of an
-external switch based on the PHY address failed and it is not needed
-any more.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/b44.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -2413,8 +2413,11 @@ static int b44_init_one(struct ssb_devic
- b44_chip_reset(bp, B44_CHIP_RESET_FULL);
-
- /* do a phy reset to test if there is an active phy */
-- if (b44_phy_reset(bp) < 0)
-- bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+ err = b44_phy_reset(bp);
-+ if (err < 0) {
-+ dev_err(sdev->dev, "phy reset failed\n");
-+ goto err_out_unregister_netdev;
-+ }
-
- if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
- err = b44_register_phy_one(bp);
diff --git a/target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch b/target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch
deleted file mode 100644
index ae539a3..0000000
--- a/target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From b04138b335203b79ffe1b14750fa245a4dab7191 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 20 Dec 2013 02:16:13 +0100
-Subject: [PATCH 208/208] b44: use fixed PHY device if we do not find any
-
-The ADM6996L switch and some Broadcom switches with two MII interfaces
-like the BCM5325F connected to two MACs on the SoC, used on some
-routers do not return a valid value when reading the PHY id register
-and Linux thinks there is no PHY at all, but that is wrong.
-This patch registers a fixed phy in the arch code and then searches it
-when there is no other phy in the Ethernet driver code.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- arch/mips/bcm47xx/setup.c | 10 ++++++++++
- drivers/net/ethernet/broadcom/b44.c | 16 +++++++++++++++-
- drivers/net/ethernet/broadcom/b44.h | 3 +++
- 3 files changed, 28 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -30,6 +30,9 @@
-
- #include <linux/export.h>
- #include <linux/types.h>
-+#include <linux/ethtool.h>
-+#include <linux/phy.h>
-+#include <linux/phy_fixed.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-@@ -269,6 +272,12 @@ static int __init bcm47xx_cpu_fixes(void
- }
- arch_initcall(bcm47xx_cpu_fixes);
-
-+static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
-+ .link = 1,
-+ .speed = SPEED_100,
-+ .duplex = DUPLEX_FULL,
-+};
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- switch (bcm47xx_bus_type) {
-@@ -287,6 +296,7 @@ static int __init bcm47xx_register_bus_c
- bcm47xx_buttons_register();
- bcm47xx_leds_register();
- bcm47xx_workarounds();
-+ fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
-
- return 0;
- }
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -2233,6 +2233,7 @@ static int b44_register_phy_one(struct b
- struct ssb_device *sdev = bp->sdev;
- struct phy_device *phydev;
- char bus_id[MII_BUS_ID_SIZE + 3];
-+ struct ssb_sprom *sprom = &sdev->bus->sprom;
- int err;
-
- mii_bus = mdiobus_alloc();
-@@ -2266,7 +2267,20 @@ static int b44_register_phy_one(struct b
- goto err_out_mdiobus_irq;
- }
-
-- snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id, bp->phy_addr);
-+ if (!bp->mii_bus->phy_map[bp->phy_addr] &&
-+ (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
-+
-+ dev_info(sdev->dev,
-+ "could not find PHY at %i, use fixed one\n",
-+ bp->phy_addr);
-+
-+ bp->phy_addr = 0;
-+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, "fixed-0",
-+ bp->phy_addr);
-+ } else {
-+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id,
-+ bp->phy_addr);
-+ }
-
- phydev = phy_connect(bp->dev, bus_id, &b44_adjust_link,
- PHY_INTERFACE_MODE_MII);
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -345,6 +345,9 @@ B44_STAT_REG_DECLARE
- struct u64_stats_sync syncp;
- };
-
-+#define B44_BOARDFLAG_ROBO 0x0010 /* Board has robo switch */
-+#define B44_BOARDFLAG_ADM 0x0080 /* Board has ADMtek switch */
-+
- struct ssb_device;
-
- struct b44 {
diff --git a/target/linux/brcm47xx/patches-3.10/209-b44-register-adm-switch.patch b/target/linux/brcm47xx/patches-3.10/209-b44-register-adm-switch.patch
deleted file mode 100644
index 62bb89c..0000000
--- a/target/linux/brcm47xx/patches-3.10/209-b44-register-adm-switch.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 9 Nov 2013 17:03:59 +0100
-Subject: [PATCH 210/210] b44: register adm switch
-
----
- drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/b44.h | 3 ++
- 2 files changed, 60 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/slab.h>
- #include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/adm6996-gpio.h>
-
- #include <asm/uaccess.h>
- #include <asm/io.h>
-@@ -2227,6 +2229,70 @@ static void b44_adjust_link(struct net_d
- }
- }
-
-+#ifdef CONFIG_BCM47XX
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+ int gpio;
-+ struct platform_device *pdev;
-+ struct adm6996_gpio_platform_data adm_data = {0};
-+ struct platform_device_info info = {0};
-+
-+ adm_data.model = ADM6996L;
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
-+ if (gpio >= 0)
-+ adm_data.eecs = gpio;
-+ else
-+ adm_data.eecs = 2;
-+
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
-+ if (gpio >= 0)
-+ adm_data.eesk = gpio;
-+ else
-+ adm_data.eesk = 3;
-+
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
-+ if (gpio >= 0)
-+ adm_data.eedi = gpio;
-+ else
-+ adm_data.eedi = 4;
-+
-+ gpio = bcm47xx_nvram_gpio_pin("adm_rc");
-+ if (gpio >= 0)
-+ adm_data.eerc = gpio;
-+ else
-+ adm_data.eerc = 5;
-+
-+ info.parent = bp->sdev->dev;
-+ info.name = "adm6996_gpio";
-+ info.id = -1;
-+ info.data = &adm_data;
-+ info.size_data = sizeof(adm_data);
-+
-+ if (!bp->adm_switch) {
-+ pdev = platform_device_register_full(&info);
-+ if (IS_ERR(pdev))
-+ return PTR_ERR(pdev);
-+
-+ bp->adm_switch = pdev;
-+ }
-+ return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+ if (bp->adm_switch)
-+ platform_device_unregister(bp->adm_switch);
-+}
-+#else
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+ return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+
-+}
-+#endif /* CONFIG_BCM47XX */
-+
- static int b44_register_phy_one(struct b44 *bp)
- {
- struct mii_bus *mii_bus;
-@@ -2270,6 +2336,9 @@ static int b44_register_phy_one(struct b
- if (!bp->mii_bus->phy_map[bp->phy_addr] &&
- (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
-
-+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
-+ b44_register_adm_switch(bp);
-+
- dev_info(sdev->dev,
- "could not find PHY at %i, use fixed one\n",
- bp->phy_addr);
-@@ -2465,6 +2534,7 @@ static void b44_remove_one(struct ssb_de
- unregister_netdev(dev);
- if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- b44_unregister_phy_one(bp);
-+ b44_unregister_adm_switch(bp);
- ssb_device_disable(sdev, 0);
- ssb_bus_may_powerdown(sdev->bus);
- free_netdev(dev);
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -404,6 +404,9 @@ struct b44 {
- struct mii_bus *mii_bus;
- int old_link;
- struct mii_if_info mii_if;
-+
-+ /* platform device for associated switch */
-+ struct platform_device *adm_switch;
- };
-
- #endif /* _B44_H */
diff --git a/target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch
deleted file mode 100644
index 452ea2e..0000000
--- a/target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
- error:
- pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+ char buf[20];
-+ struct ssb_device *sdev = bp->sdev;
-+
-+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+ if (sdev->bus->sprom.board_num == 100) {
-+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+ } else {
-+ /* WL-HDD */
-+ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
-+ !strncmp(buf, "WL300-", strlen("WL300-"))) {
-+ if (sdev->bus->sprom.et0phyaddr == 0 &&
-+ sdev->bus->sprom.et1phyaddr == 1)
-+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+ }
-+ }
-+ return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
-
- static int b44_setup_phy(struct b44 *bp)
-@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
- int err;
-
- b44_wap54g10_workaround(bp);
-+ b44_bcm47xx_workarounds(bp);
-
- if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- return 0;
-@@ -2162,6 +2187,8 @@ static int b44_get_invariants(struct b44
- * valid PHY address. */
- bp->phy_addr &= 0x1F;
-
-+ b44_bcm47xx_workarounds(bp);
-+
- memcpy(bp->dev->dev_addr, addr, 6);
-
- if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/brcm47xx/patches-3.10/211-b44-start_phy.patch b/target/linux/brcm47xx/patches-3.10/211-b44-start_phy.patch
deleted file mode 100644
index c542966..0000000
--- a/target/linux/brcm47xx/patches-3.10/211-b44-start_phy.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -576,7 +576,6 @@ static void b44_check_phy(struct b44 *bp
- else
- val &= ~TX_CTRL_DUPLEX;
- bw32(bp, B44_TX_CTRL, val);
-- netif_carrier_on(bp->dev);
- b44_link_report(bp);
- }
- return;
-@@ -1511,6 +1510,10 @@ static int b44_open(struct net_device *d
- add_timer(&bp->timer);
-
- b44_enable_ints(bp);
-+
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
-+ phy_start(bp->phydev);
-+
- netif_start_queue(dev);
- out:
- return err;
-@@ -1673,6 +1676,9 @@ static int b44_close(struct net_device *
-
- netif_stop_queue(dev);
-
-+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
-+ phy_stop(bp->phydev);
-+
- napi_disable(&bp->napi);
-
- del_timer_sync(&bp->timer);
-@@ -2251,8 +2257,13 @@ static void b44_adjust_link(struct net_d
- }
-
- if (status_changed) {
-- b44_check_phy(bp);
-- phy_print_status(phydev);
-+ u32 val = br32(bp, B44_TX_CTRL);
-+ if (bp->flags & B44_FLAG_FULL_DUPLEX)
-+ val |= TX_CTRL_DUPLEX;
-+ else
-+ val &= ~TX_CTRL_DUPLEX;
-+ bw32(bp, B44_TX_CTRL, val);
-+ b44_link_report(bp);
- }
- }
-
diff --git a/target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch
deleted file mode 100644
index 748710f..0000000
--- a/target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -38,6 +38,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
- config BCMA_HOST_SOC
- bool "Support for BCMA in a SoC"
- depends on BCMA
-+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
- help
- Host interface for a Broadcom AIX bus directly mapped into
- the memory. This only works with the Broadcom SoCs from the
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -146,6 +146,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- bool
- depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
-+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- default y
-
- config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-3.10/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-3.10/300-fork_cacheflush.patch
deleted file mode 100644
index 686fb1b..0000000
--- a/target/linux/brcm47xx/patches-3.10/300-fork_cacheflush.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -32,7 +32,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-3.10/310-no_highpage.patch b/target/linux/brcm47xx/patches-3.10/310-no_highpage.patch
deleted file mode 100644
index bdf5672..0000000
--- a/target/linux/brcm47xx/patches-3.10/310-no_highpage.patch
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -46,6 +46,7 @@
- #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
-
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
-
- extern void build_clear_page(void);
- extern void build_copy_page(void);
-@@ -80,13 +81,16 @@ static inline void clear_user_page(void
- flush_data_cache_page((unsigned long)addr);
- }
-
--extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-- struct page *to);
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+ struct page *to)
-+{
-+ extern void (*flush_data_cache_page)(unsigned long addr);
-
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+ copy_page(vto, vfrom);
-+ if (!cpu_has_ic_fills_f_dc ||
-+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+ flush_data_cache_page((unsigned long)vto);
-+}
-
- /*
- * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -197,30 +197,6 @@ void kunmap_coherent(void)
- preempt_check_resched();
- }
-
--void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma)
--{
-- void *vfrom, *vto;
--
-- vto = kmap_atomic(to);
-- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
-- page_mapped(from) && !Page_dcache_dirty(from)) {
-- vfrom = kmap_coherent(from, vaddr);
-- copy_page(vto, vfrom);
-- kunmap_coherent();
-- } else {
-- vfrom = kmap_atomic(from);
-- copy_page(vto, vfrom);
-- kunmap_atomic(vfrom);
-- }
-- if ((!cpu_has_ic_fills_f_dc) ||
-- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-- flush_data_cache_page((unsigned long)vto);
-- kunmap_atomic(vto);
-- /* Make sure this page is cleared on other CPU's too before using it */
-- smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
diff --git a/target/linux/brcm47xx/patches-3.10/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-3.10/610-pci_ide_fix.patch
deleted file mode 100644
index f254b20..0000000
--- a/target/linux/brcm47xx/patches-3.10/610-pci_ide_fix.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
- hw->io_ports.ctl_addr = ctl_addr;
- }
-
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS 2
-+#else
- #define MAX_HWIFS 10
-+#endif
-
- /*
- * Now for the data we need to maintain per-drive: ide_drive_t
diff --git a/target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch b/target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch
deleted file mode 100644
index a1ab0d2..0000000
--- a/target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch
+++ /dev/null
@@ -1,197 +0,0 @@
---- a/drivers/net/ethernet/broadcom/tg3.c
-+++ b/drivers/net/ethernet/broadcom/tg3.c
-@@ -1367,7 +1367,7 @@ static int tg3_mdio_read(struct mii_bus
-
- spin_lock_bh(&tp->lock);
-
-- if (tg3_readphy(tp, reg, &val))
-+ if (__tg3_readphy(tp, mii_id, reg, &val))
- val = -EIO;
-
- spin_unlock_bh(&tp->lock);
-@@ -1382,7 +1382,7 @@ static int tg3_mdio_write(struct mii_bus
-
- spin_lock_bh(&tp->lock);
-
-- if (tg3_writephy(tp, reg, val))
-+ if (__tg3_writephy(tp, mii_id, reg, val))
- ret = -EIO;
-
- spin_unlock_bh(&tp->lock);
-@@ -1400,7 +1400,7 @@ static void tg3_mdio_config_5785(struct
- u32 val;
- struct phy_device *phydev;
-
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
- switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
- case PHY_ID_BCM50610:
- case PHY_ID_BCM50610M:
-@@ -1505,6 +1505,13 @@ static int tg3_mdio_init(struct tg3 *tp)
- TG3_CPMU_PHY_STRAP_IS_SERDES;
- if (is_serdes)
- tp->phy_addr += 7;
-+ } else if (tg3_flag(tp, IS_SSB_CORE) && tg3_flag(tp, ROBOSWITCH)) {
-+ int addr;
-+
-+ addr = ssb_gige_get_phyaddr(tp->pdev);
-+ if (addr < 0)
-+ return addr;
-+ tp->phy_addr = addr;
- } else
- tp->phy_addr = TG3_PHY_MII_ADDR;
-
-@@ -1525,7 +1532,7 @@ static int tg3_mdio_init(struct tg3 *tp)
- tp->mdio_bus->read = &tg3_mdio_read;
- tp->mdio_bus->write = &tg3_mdio_write;
- tp->mdio_bus->reset = &tg3_mdio_reset;
-- tp->mdio_bus->phy_mask = ~(1 << TG3_PHY_MII_ADDR);
-+ tp->mdio_bus->phy_mask = ~(1 << tp->phy_addr);
- tp->mdio_bus->irq = &tp->mdio_irq[0];
-
- for (i = 0; i < PHY_MAX_ADDR; i++)
-@@ -1546,7 +1553,7 @@ static int tg3_mdio_init(struct tg3 *tp)
- return i;
- }
-
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
-
- if (!phydev || !phydev->drv) {
- dev_warn(&tp->pdev->dev, "No PHY devices\n");
-@@ -1963,7 +1970,7 @@ static void tg3_setup_flow_control(struc
- u32 old_tx_mode = tp->tx_mode;
-
- if (tg3_flag(tp, USE_PHYLIB))
-- autoneg = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]->autoneg;
-+ autoneg = tp->mdio_bus->phy_map[tp->phy_addr]->autoneg;
- else
- autoneg = tp->link_config.autoneg;
-
-@@ -1999,7 +2006,7 @@ static void tg3_adjust_link(struct net_d
- u8 oldflowctrl, linkmesg = 0;
- u32 mac_mode, lcl_adv, rmt_adv;
- struct tg3 *tp = netdev_priv(dev);
-- struct phy_device *phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ struct phy_device *phydev = tp->mdio_bus->phy_map[tp->phy_addr];
-
- spin_lock_bh(&tp->lock);
-
-@@ -2088,7 +2095,7 @@ static int tg3_phy_init(struct tg3 *tp)
- /* Bring the PHY back to a known state. */
- tg3_bmcr_reset(tp);
-
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
-
- /* Attach the MAC to the PHY. */
- phydev = phy_connect(tp->dev, dev_name(&phydev->dev),
-@@ -2115,7 +2122,7 @@ static int tg3_phy_init(struct tg3 *tp)
- SUPPORTED_Asym_Pause);
- break;
- default:
-- phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
-+ phy_disconnect(tp->mdio_bus->phy_map[tp->phy_addr]);
- return -EINVAL;
- }
-
-@@ -2133,7 +2140,7 @@ static void tg3_phy_start(struct tg3 *tp
- if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
- return;
-
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
-
- if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
- tp->phy_flags &= ~TG3_PHYFLG_IS_LOW_POWER;
-@@ -2153,13 +2160,13 @@ static void tg3_phy_stop(struct tg3 *tp)
- if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
- return;
-
-- phy_stop(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
-+ phy_stop(tp->mdio_bus->phy_map[tp->phy_addr]);
- }
-
- static void tg3_phy_fini(struct tg3 *tp)
- {
- if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
-- phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
-+ phy_disconnect(tp->mdio_bus->phy_map[tp->phy_addr]);
- tp->phy_flags &= ~TG3_PHYFLG_IS_CONNECTED;
- }
- }
-@@ -3999,7 +4006,7 @@ static int tg3_power_down_prepare(struct
- struct phy_device *phydev;
- u32 phyid, advertising;
-
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
-
- tp->phy_flags |= TG3_PHYFLG_IS_LOW_POWER;
-
-@@ -11782,7 +11789,7 @@ static int tg3_get_settings(struct net_d
- struct phy_device *phydev;
- if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
- return -EAGAIN;
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
- return phy_ethtool_gset(phydev, cmd);
- }
-
-@@ -11849,7 +11856,7 @@ static int tg3_set_settings(struct net_d
- struct phy_device *phydev;
- if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
- return -EAGAIN;
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
- return phy_ethtool_sset(phydev, cmd);
- }
-
-@@ -12006,7 +12013,7 @@ static int tg3_nway_reset(struct net_dev
- if (tg3_flag(tp, USE_PHYLIB)) {
- if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
- return -EAGAIN;
-- r = phy_start_aneg(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
-+ r = phy_start_aneg(tp->mdio_bus->phy_map[tp->phy_addr]);
- } else {
- u32 bmcr;
-
-@@ -12124,7 +12131,7 @@ static int tg3_set_pauseparam(struct net
- u32 newadv;
- struct phy_device *phydev;
-
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
-
- if (!(phydev->supported & SUPPORTED_Pause) ||
- (!(phydev->supported & SUPPORTED_Asym_Pause) &&
-@@ -13558,7 +13565,7 @@ static int tg3_ioctl(struct net_device *
- struct phy_device *phydev;
- if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
- return -EAGAIN;
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
- return phy_mii_ioctl(phydev, ifr, cmd);
- }
-
-@@ -17194,8 +17201,10 @@ static int tg3_init_one(struct pci_dev *
- tg3_flag_set(tp, FLUSH_POSTED_WRITES);
- if (ssb_gige_one_dma_at_once(pdev))
- tg3_flag_set(tp, ONE_DMA_AT_ONCE);
-- if (ssb_gige_have_roboswitch(pdev))
-+ if (ssb_gige_have_roboswitch(pdev)) {
-+ tg3_flag_set(tp, USE_PHYLIB);
- tg3_flag_set(tp, ROBOSWITCH);
-+ }
- if (ssb_gige_is_rgmii(pdev))
- tg3_flag_set(tp, RGMII_MODE);
- }
-@@ -17464,7 +17473,7 @@ static int tg3_init_one(struct pci_dev *
-
- if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
- struct phy_device *phydev;
-- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
- netdev_info(dev,
- "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
- phydev->drv->name, dev_name(&phydev->dev));
diff --git a/target/linux/brcm47xx/patches-3.10/791-tg3-no-pci-sleep.patch b/target/linux/brcm47xx/patches-3.10/791-tg3-no-pci-sleep.patch
deleted file mode 100644
index f8b2c7c..0000000
--- a/target/linux/brcm47xx/patches-3.10/791-tg3-no-pci-sleep.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-When the Ethernet controller is powered down and someone wants to
-access the mdio bus like the witch driver (b53) the system crashed if
-PCI_D3hot was set before. This patch deactivates this power sawing mode
-when a switch driver is in use.
-
---- a/drivers/net/ethernet/broadcom/tg3.c
-+++ b/drivers/net/ethernet/broadcom/tg3.c
-@@ -4221,7 +4221,8 @@ static void tg3_power_down(struct tg3 *t
- tg3_power_down_prepare(tp);
-
- pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
-- pci_set_power_state(tp->pdev, PCI_D3hot);
-+ if (!tg3_flag(tp, ROBOSWITCH))
-+ pci_set_power_state(tp->pdev, PCI_D3hot);
- }
-
- static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
diff --git a/target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch
deleted file mode 100644
index f666cf3..0000000
--- a/target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch
+++ /dev/null
@@ -1,296 +0,0 @@
-The Netgear wgt634u uses a different format for storing the
-configuration. This patch is needed to read out the correct
-configuration. The cfe_env.c file uses a different method way to read
-out the configuration than the in kernel cfe config reader.
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -5,3 +5,4 @@
-
- obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
- obj-y += board.o buttons.o leds.o workarounds.o
-+obj-y += cfe_env.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/cfe_env.c
-@@ -0,0 +1,229 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#define NVRAM_SIZE (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types. These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ *
-+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
-+ * indicates the size of the length field.
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
-+#define ENV_LENGTH_8BITS 0x01
-+
-+#define ENV_TYPE_USER 0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END 0x00
-+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags
-+ */
-+
-+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
-+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
-+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
-+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
-+
-+
-+/* *********************************************************************
-+ * _nvram_read(buffer,offset,length)
-+ *
-+ * Read data from the NVRAM device
-+ *
-+ * Input parameters:
-+ * buffer - destination buffer
-+ * offset - offset of data to read
-+ * length - number of bytes to read
-+ *
-+ * Return value:
-+ * number of bytes read, or <0 if error occured
-+ ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+ int i;
-+ if (offset > NVRAM_SIZE)
-+ return -1;
-+
-+ for ( i = 0; i < length; i++) {
-+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+ }
-+ return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+ while (*dest && (cnt > 0)) {
-+ if (*dest == c) return (char *) dest;
-+ dest++;
-+ cnt--;
-+ }
-+ return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param name name of variable to get
-+ * @return value of variable or NULL if undefined
-+ */
-+
-+char*
-+cfe_env_get(unsigned char *nv_buf, char* name)
-+{
-+ int size;
-+ unsigned char *buffer;
-+ unsigned char *ptr;
-+ unsigned char *envval;
-+ unsigned int reclen;
-+ unsigned int rectype;
-+ int offset;
-+ int flg;
-+
-+ if (!strcmp(name, "nvram_type"))
-+ return "cfe";
-+
-+ size = NVRAM_SIZE;
-+ buffer = &_nvdata[0];
-+
-+ ptr = buffer;
-+ offset = 0;
-+
-+ /* Read the record type and length */
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+ goto error;
-+ }
-+
-+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
-+
-+ /* Adjust pointer for TLV type */
-+ rectype = *(ptr);
-+ offset++;
-+ size--;
-+
-+ /*
-+ * Read the length. It can be either 1 or 2 bytes
-+ * depending on the code
-+ */
-+ if (rectype & ENV_LENGTH_8BITS) {
-+ /* Read the record type and length - 8 bits */
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+ goto error;
-+ }
-+ reclen = *(ptr);
-+ size--;
-+ offset++;
-+ }
-+ else {
-+ /* Read the record type and length - 16 bits, MSB first */
-+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+ goto error;
-+ }
-+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+ size -= 2;
-+ offset += 2;
-+ }
-+
-+ if (reclen > size)
-+ break; /* should not happen, bad NVRAM */
-+
-+ switch (rectype) {
-+ case ENV_TLV_TYPE_ENV:
-+ /* Read the TLV data */
-+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+ goto error;
-+ flg = *ptr++;
-+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+ if (envval) {
-+ *envval++ = '\0';
-+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0
-+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+ if(!strcmp(ptr, name)){
-+ return _valuestr;
-+ }
-+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+ return _valuestr;
-+ }
-+ break;
-+
-+ default:
-+ /* Unknown TLV type, skip it. */
-+ break;
-+ }
-+
-+ /*
-+ * Advance to next TLV
-+ */
-+
-+ size -= (int)reclen;
-+ offset += reclen;
-+
-+ /* Read the next record type */
-+ ptr = buffer;
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+ goto error;
-+ }
-+
-+error:
-+ return NULL;
-+
-+}
-+
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -22,6 +22,8 @@
- #include <asm/mach-bcm47xx/bcm47xx.h>
-
- static char nvram_buf[NVRAM_SPACE];
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
-
- static u32 find_nvram_size(u32 end)
- {
-@@ -47,6 +49,26 @@ static int nvram_find_and_copy(u32 base,
- u32 *src, *dst;
- u32 size;
-
-+ cfe_env = 0;
-+
-+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+ if (lim >= 8 * 1024 * 1024) {
-+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
-+ dst = (u32 *) nvram_buf;
-+
-+ if ((*src & 0xff00ff) == 0x000001) {
-+ printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+ for (i = 0; i < 0x1ff0; i++) {
-+ if (*src == 0xFFFFFFFF)
-+ break;
-+ *dst++ = *src++;
-+ }
-+ cfe_env = 1;
-+ return 0;
-+ }
-+ }
-+
- /* TODO: when nvram is on nand flash check for bad blocks first. */
- off = FLASH_MIN;
- while (off <= lim) {
-@@ -173,6 +195,13 @@ int bcm47xx_nvram_getenv(char *name, cha
- return err;
- }
-
-+ if (cfe_env) {
-+ value = cfe_env_get(nvram_buf, name);
-+ if (!value)
-+ return -ENOENT;
-+ return snprintf(val, val_len, "%s", value);
-+ }
-+
- /* Look for name=value and return value */
- var = &nvram_buf[sizeof(struct nvram_header)];
- end = nvram_buf + sizeof(nvram_buf) - 2;
diff --git a/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch
deleted file mode 100644
index 6aaac83..0000000
--- a/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch
+++ /dev/null
@@ -1,101 +0,0 @@
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -36,6 +36,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/gpio_wdt.h>
- #include <asm/bootinfo.h>
- #include <asm/prom.h>
- #include <asm/reboot.h>
-@@ -278,6 +279,33 @@ static struct fixed_phy_status bcm47xx_f
- .duplex = DUPLEX_FULL,
- };
-
-+static struct gpio_wdt_platform_data gpio_wdt_data;
-+
-+static struct platform_device gpio_wdt_device = {
-+ .name = "gpio-wdt",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gpio_wdt_data,
-+ },
-+};
-+
-+static int __init bcm47xx_register_gpio_watchdog(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+
-+ switch (board) {
-+ case BCM47XX_BOARD_HUAWEI_E970:
-+ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
-+ gpio_wdt_data.gpio = 7;
-+ gpio_wdt_data.interval = HZ;
-+ gpio_wdt_data.first_interval = HZ / 5;
-+ return platform_device_register(&gpio_wdt_device);
-+ default:
-+ /* Nothing to do */
-+ return 0;
-+ }
-+}
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- switch (bcm47xx_bus_type) {
-@@ -297,6 +325,7 @@ static int __init bcm47xx_register_bus_c
- bcm47xx_leds_register();
- bcm47xx_workarounds();
- fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
-+ bcm47xx_register_gpio_watchdog();
-
- return 0;
- }
---- a/arch/mips/configs/bcm47xx_defconfig
-+++ b/arch/mips/configs/bcm47xx_defconfig
-@@ -379,6 +379,7 @@ CONFIG_THERMAL=y
- CONFIG_WATCHDOG=y
- CONFIG_WATCHDOG_NOWAYOUT=y
- CONFIG_BCM47XX_WDT=y
-+CONFIG_GPIO_WDT=y
- CONFIG_SSB_DRIVER_GIGE=y
- CONFIG_DISPLAY_SUPPORT=m
- CONFIG_SOUND=m
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
- }
- EXPORT_SYMBOL(ssb_watchdog_timer_set);
-
-+#ifdef CONFIG_BCM47XX
-+#include <bcm47xx_board.h>
-+
-+static bool ssb_watchdog_supported(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+
-+ /* The Huawei E970 has a hardware watchdog using a GPIO */
-+ switch (board) {
-+ case BCM47XX_BOARD_HUAWEI_E970:
-+ return false;
-+ default:
-+ return true;
-+ }
-+}
-+#else
-+static bool ssb_watchdog_supported(void)
-+{
-+ return true;
-+}
-+#endif
-+
- int ssb_watchdog_register(struct ssb_bus *bus)
- {
- struct bcm47xx_wdt wdt = {};
- struct platform_device *pdev;
-
-+ if (!ssb_watchdog_supported())
-+ return 0;
-+
- if (ssb_chipco_available(&bus->chipco)) {
- wdt.driver_data = &bus->chipco;
- wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
diff --git a/target/linux/brcm47xx/patches-3.10/920-cache-wround.patch b/target/linux/brcm47xx/patches-3.10/920-cache-wround.patch
deleted file mode 100644
index bac6899..0000000
--- a/target/linux/brcm47xx/patches-3.10/920-cache-wround.patch
+++ /dev/null
@@ -1,138 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -20,10 +20,28 @@
- #ifdef CONFIG_BCM47XX
- #include <asm/paccess.h>
- #include <linux/ssb/ssb.h>
--#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+ return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+ unsigned long x;
-+ get_dbe(x, (unsigned long *)addr);;
-+}
-
--#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
--#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
- #else
- #define BCM4710_DUMMY_RREG()
-
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -969,6 +969,9 @@ build_get_pgde32(u32 **p, unsigned int t
- #endif
- uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1311,12 +1314,12 @@ static void __cpuinit build_r4000_tlb_re
- /* No need for uasm_i_nop */
- }
-
--#ifdef CONFIG_BCM47XX
-- uasm_i_nop(&p);
--#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+# endif
- build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
-
-@@ -1328,6 +1331,9 @@ static void __cpuinit build_r4000_tlb_re
- build_update_entries(&p, K0, K1);
- build_tlb_write_entry(&p, &l, &r, tlb_random);
- uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+#endif
- uasm_i_eret(&p); /* return from trap */
- }
- #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-@@ -1845,12 +1851,12 @@ build_r4000_tlbchange_handler_head(u32 *
- {
- struct work_registers wr = build_get_work_registers(p);
-
--#ifdef CONFIG_BCM47XX
-- uasm_i_nop(p);
--#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+# endif
- build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
- #endif
-
-@@ -1889,6 +1895,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- build_tlb_write_entry(p, l, r, tlb_indexed);
- uasm_l_leave(l, *p);
- build_restore_work_registers(p);
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- uasm_i_eret(p); /* return from trap */
-
- #ifdef CONFIG_64BIT
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -21,6 +21,19 @@
- #include <asm/war.h>
- #include <asm/thread_info.h>
-
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+# undef eret
-+# endif
-+# define eret \
-+ .set push; \
-+ .set noreorder; \
-+ nop; \
-+ nop; \
-+ eret; \
-+ .set pop;
-+#endif
-+
- #ifdef CONFIG_MIPS_MT_SMTC
- #define PANIC_PIC(msg) \
- .set push; \
-@@ -48,7 +61,6 @@ NESTED(except_vec3_generic, 0, sp)
- .set noat
- #ifdef CONFIG_BCM47XX
- nop
-- nop
- #endif
- #if R5432_CP0_INTERRUPT_WAR
- mfc0 k0, CP0_INDEX
-@@ -73,6 +85,9 @@ NESTED(except_vec3_r4000, 0, sp)
- .set push
- .set mips3
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+#endif
- mfc0 k1, CP0_CAUSE
- li k0, 31<<2
- andi k1, k1, 0x7c
diff --git a/target/linux/brcm47xx/patches-3.10/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-3.10/940-bcm47xx-yenta.patch
deleted file mode 100644
index 1739ff7..0000000
--- a/target/linux/brcm47xx/patches-3.10/940-bcm47xx-yenta.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
- * Probe for usable interrupts using the force
- * register to generate bogus card status events.
- */
-+#ifndef CONFIG_BCM47XX
-+ /* WRT54G3G does not like this */
- cb_writel(socket, CB_SOCKET_EVENT, -1);
- cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- reg = exca_readb(socket, I365_CSCINT);
-@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
- }
- cb_writel(socket, CB_SOCKET_MASK, 0);
- exca_writeb(socket, I365_CSCINT, reg);
-+#endif
-
- mask = probe_irq_mask(val) & 0xffff;
-
-@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
- else
- socket->socket.irq_mask = 0;
-
-+ /* irq mask probing is broken for the WRT54G3G */
-+ if (socket->socket.irq_mask == 0)
-+ socket->socket.irq_mask = 0x6f8;
-+
- dev_printk(KERN_INFO, &socket->dev->dev,
- "ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
-@@ -1257,6 +1264,15 @@ static int yenta_probe(struct pci_dev *d
- dev_printk(KERN_INFO, &dev->dev,
- "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
-
-+ /* Generate an interrupt on card insert/remove */
-+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+ /* Set up Multifunction Routing Status Register */
-+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+ /* Switch interrupts to parallelized */
-+ config_writeb(socket, 0x92, 0x64);
-+
- yenta_fixup_parent_bridge(dev->subordinate);
-
- /* Register it with the pcmcia layer.. */
diff --git a/target/linux/brcm47xx/patches-3.10/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.10/976-ssb_increase_pci_delay.patch
deleted file mode 100644
index b56f1d5..0000000
--- a/target/linux/brcm47xx/patches-3.10/976-ssb_increase_pci_delay.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -375,7 +375,7 @@ static void ssb_pcicore_init_hostmode(st
- set_io_port_base(ssb_pcicore_controller.io_map_base);
- /* Give some time to the PCI controller to configure itself with the new
- * values. Not waiting at this point causes crashes of the machine. */
-- mdelay(10);
-+ mdelay(300);
- register_pci_controller(&ssb_pcicore_controller);
- }
-
diff --git a/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch
deleted file mode 100644
index 8bab5f0..0000000
--- a/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -136,6 +136,10 @@ static int bcm47xx_get_invariants(struct
- if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
- iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
-
-+ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
-+ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
-+ iv->has_cardbus_slot = 0;
-+
- return 0;
- }
-
diff --git a/target/linux/brcm47xx/patches-3.10/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.10/999-wl_exports.patch
deleted file mode 100644
index 2c464bd..0000000
--- a/target/linux/brcm47xx/patches-3.10/999-wl_exports.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -21,7 +21,8 @@
- #include <bcm47xx_nvram.h>
- #include <asm/mach-bcm47xx/bcm47xx.h>
-
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static int cfe_env;
- extern char *cfe_env_get(char *nv_buf, const char *name);
-
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -59,6 +59,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT */
-