atheros[ar231x-eth]: pass phys address of I/O memory via platform res

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41697

3 files changed, 21 insertions, 24 deletions

diff --git a/target/linux/atheros/patches-3.10/100-board.patch b/target/linux/atheros/patches-3.10/100-board.patch
index 8fbd250..b9a88a1 100644
--- a/target/linux/atheros/patches-3.10/100-board.patch
+++ b/target/linux/atheros/patches-3.10/100-board.patch
@@ -1805,7 +1805,7 @@
 +	.reset_clear = ar5312_device_reset_clear,
 +	.reset_mac = AR531X_RESET_ENET0,
 +	.reset_phy = AR531X_RESET_EPHY0,
-+	.phy_base = KSEG1ADDR(AR531X_ENET0),
++	.phy_base = AR531X_ENET0,
 +	.config = &ar231x_board,
 +};
 +
@@ -1814,7 +1814,7 @@
 +	.reset_clear = ar5312_device_reset_clear,
 +	.reset_mac = AR531X_RESET_ENET1,
 +	.reset_phy = AR531X_RESET_EPHY1,
-+	.phy_base = KSEG1ADDR(AR531X_ENET1),
++	.phy_base = AR531X_ENET1,
 +	.config = &ar231x_board,
 +};
 +
@@ -1936,12 +1936,12 @@
 +	switch (ar231x_devtype) {
 +	case DEV_TYPE_AR5312:
 +		ar5312_eth0_data.macaddr = config->enet0_mac;
-+		ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
-+			AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
++		ar231x_add_ethernet(0, AR531X_ENET0, AR5312_IRQ_ENET0_INTRS,
++				    &ar5312_eth0_data);
 +
 +		ar5312_eth1_data.macaddr = config->enet1_mac;
-+		ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
-+			AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
++		ar231x_add_ethernet(1, AR531X_ENET1, AR5312_IRQ_ENET1_INTRS,
++				    &ar5312_eth1_data);
 +
 +		if (!ar231x_board.radio)
 +			return 0;
@@ -1960,7 +1960,7 @@
 +		ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
 +		ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
 +		ar5312_eth1_data.macaddr = config->enet0_mac;
-+		ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
++		ar231x_add_ethernet(0, AR531X_ENET1,
 +			AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
 +
 +		if (!ar231x_board.radio)
@@ -2409,7 +2409,7 @@
 +	.reset_clear = ar2315_device_reset_clear,
 +	.reset_mac = AR2315_RESET_ENET0,
 +	.reset_phy = AR2315_RESET_EPHY0,
-+	.phy_base = KSEG1ADDR(AR2315_ENET0),
++	.phy_base = AR2315_ENET0,
 +	.config = &ar231x_board,
 +};
 +
@@ -2523,8 +2523,8 @@
 +	ar2315_init_gpio_leds();
 +	platform_device_register(&ar2315_wdt);
 +	platform_device_register(&ar2315_spiflash);
-+	ar231x_add_ethernet(0, KSEG1ADDR(AR2315_ENET0), AR2315_IRQ_ENET0_INTRS,
-+		&ar2315_eth_data);
++	ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
++			    &ar2315_eth_data);
 +	ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
 +
 +	return 0;
diff --git a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch b/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
index 5f743b4..0e158d4 100644
--- a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
+++ b/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
@@ -33,7 +33,7 @@
 +obj-$(CONFIG_NET_AR231X) += ar231x.o
 --- /dev/null
 +++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
-@@ -0,0 +1,1249 @@
+@@ -0,0 +1,1246 @@
 +/*
 + * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
 + *
@@ -257,8 +257,7 @@
 +	tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
 +	tasklet_disable(&sp->rx_tasklet);
 +
-+	sp->eth_regs = ioremap_nocache(virt_to_phys(ar_eth_base),
-+				       sizeof(*sp->eth_regs));
++	sp->eth_regs = ioremap_nocache(ar_eth_base, sizeof(*sp->eth_regs));
 +	if (!sp->eth_regs) {
 +		printk("Can't remap eth registers\n");
 +		return -ENXIO;
@@ -269,26 +268,24 @@
 +	 * even though the MAC might be on ENET1.
 +	 * Needto remap PHY regs separately in this case
 +	 */
-+	if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
++	if (ar_eth_base == sp->cfg->phy_base)
 +		sp->phy_regs = sp->eth_regs;
 +	else {
-+		sp->phy_regs =
-+			ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
-+							sizeof(*sp->phy_regs));
++		sp->phy_regs = ioremap_nocache(sp->cfg->phy_base,
++					       sizeof(*sp->phy_regs));
 +		if (!sp->phy_regs) {
 +			printk("Can't remap phy registers\n");
 +			return -ENXIO;
 +		}
 +	}
 +
-+	sp->dma_regs =
-+		ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
-+						sizeof(*sp->dma_regs));
-+	dev->base_addr = (unsigned int) sp->dma_regs;
++	sp->dma_regs = ioremap_nocache(ar_eth_base + 0x1000,
++				       sizeof(*sp->dma_regs));
 +	if (!sp->dma_regs) {
 +		printk("Can't remap DMA registers\n");
 +		return -ENXIO;
 +	}
++	dev->base_addr = ar_eth_base + 0x1000;
 +
 +	strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
 +	sp->name[sizeof(sp->name) - 1] = '\0';
diff --git a/target/linux/atheros/patches-3.10/220-enet_micrel_workaround.patch b/target/linux/atheros/patches-3.10/220-enet_micrel_workaround.patch
index cc3a74e..361b4e3 100644
--- a/target/linux/atheros/patches-3.10/220-enet_micrel_workaround.patch
+++ b/target/linux/atheros/patches-3.10/220-enet_micrel_workaround.patch
@@ -41,7 +41,7 @@
  int ar231x_probe(struct platform_device *pdev)
  {
  	struct net_device *dev;
-@@ -287,6 +314,23 @@ int ar231x_probe(struct platform_device
+@@ -284,6 +311,23 @@ int ar231x_probe(struct platform_device
  
  	mdiobus_register(sp->mii_bus);
  
@@ -65,7 +65,7 @@
  	if (ar231x_mdiobus_probe(dev) != 0) {
  		printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
  		rx_tasklet_cleanup(dev);
-@@ -343,8 +387,10 @@ static int ar231x_remove(struct platform
+@@ -340,8 +384,10 @@ static int ar231x_remove(struct platform
  	rx_tasklet_cleanup(dev);
  	ar231x_init_cleanup(dev);
  	unregister_netdev(dev);
@@ -78,7 +78,7 @@
  	kfree(dev);
  	return 0;
  }
-@@ -1103,6 +1149,9 @@ static int ar231x_ioctl(struct net_devic
+@@ -1100,6 +1146,9 @@ static int ar231x_ioctl(struct net_devic
  	struct ar231x_private *sp = netdev_priv(dev);
  	int ret;