summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorLuka Perkov <luka@openwrt.org>2013-10-31 12:04:02 +0000
committerLuka Perkov <luka@openwrt.org>2013-10-31 12:04:02 +0000
commit2b0fa00da8fc26e34f08680670f4637766bbd3e8 (patch)
tree23b933a80a9fb128059900f17345a7b1de150728 /target
parent6f26ef8b5dfbffc6c8090e6f10c493e2c90fb45a (diff)
downloadmtk-20170518-2b0fa00da8fc26e34f08680670f4637766bbd3e8.zip
mtk-20170518-2b0fa00da8fc26e34f08680670f4637766bbd3e8.tar.gz
mtk-20170518-2b0fa00da8fc26e34f08680670f4637766bbd3e8.tar.bz2
kirkwood: add Pogoplug E02 Kernel support
This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 38630
Diffstat (limited to 'target')
-rw-r--r--target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch130
1 files changed, 130 insertions, 0 deletions
diff --git a/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch
new file mode 100644
index 0000000..5cff4a3
--- /dev/null
+++ b/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch
@@ -0,0 +1,130 @@
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+@@ -0,0 +1,117 @@
++/dts-v1/;
++
++/include/ "kirkwood.dtsi"
++/include/ "kirkwood-6281.dtsi"
++
++/ {
++ model = "Cloud Engines Pogoplug E02";
++ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x10000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8 earlyprintk";
++ };
++
++ ocp@f1000000 {
++ pinctrl: pinctrl@10000 {
++
++ pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
++ &pmx_led_green >;
++ pinctrl-names = "default";
++
++ pmx_usb_power_enable: pmx-usb-power-enable {
++ marvell,pins = "mpp29";
++ marvell,function = "gpio";
++ };
++ pmx_led_green: pmx-led_green {
++ marvell,pins = "mpp48";
++ marvell,function = "gpio";
++ };
++ pmx_led_orange: pmx-led_orange {
++ marvell,pins = "mpp49";
++ marvell,function = "gpio";
++ };
++ };
++
++ serial@12000 {
++ status = "okay";
++ };
++
++ nand@3000000 {
++ status = "okay";
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0000000 0x100000>;
++ };
++
++ partition@100000 {
++ label = "uImage";
++ reg = <0x0100000 0x400000>;
++ };
++
++ partition@500000 {
++ label = "rootfs";
++ reg = <0x0500000 0x2000000>;
++ };
++
++ partition@2500000 {
++ label = "data";
++ reg = <0x2500000 0x5b00000>;
++ };
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++
++ health {
++ label = "status:green:health";
++ gpios = <&gpio1 16 1>;
++ linux,default-trigger = "default-on";
++ };
++ fault {
++ label = "status:orange:fault";
++ gpios = <&gpio1 17 1>;
++ };
++ };
++
++ regulators {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ usb_power: regulator@1 {
++ compatible = "regulator-fixed";
++ reg = <1>;
++ regulator-name = "USB Power";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ enable-active-high;
++ regulator-always-on;
++ regulator-boot-on;
++ gpio = <&gpio0 29 0>;
++ };
++ };
++};
++
++&mdio {
++ status = "okay";
++
++ ethphy0: ethernet-phy@0 {
++ device_type = "ethernet-phy";
++ reg = <0>;
++ };
++};
++
++&eth0 {
++ status = "okay";
++
++ ethernet0-port@0 {
++ phy-handle = <&ethphy0>;
++ };
++};
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
+ kirkwood-ns2max.dtb \
+ kirkwood-ns2mini.dtb \
+ kirkwood-nsa310.dtb \
++ kirkwood-pogo_e02.dtb \
+ kirkwood-topkick.dtb \
+ kirkwood-ts219-6281.dtb \
+ kirkwood-ts219-6282.dtb \