summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2013-06-10 08:24:56 +0000
committerJohn Crispin <john@openwrt.org>2013-06-10 08:24:56 +0000
commitfc9532aeaaa73c49e50f1052f210adfda0d0c3ed (patch)
tree530d19b4add55fc19166781ca0c99fe8eefc3443 /target
parent30786d2dd0e0063b56ba5e616e868f4e6775eaad (diff)
downloadmtk-20170518-fc9532aeaaa73c49e50f1052f210adfda0d0c3ed.zip
mtk-20170518-fc9532aeaaa73c49e50f1052f210adfda0d0c3ed.tar.gz
mtk-20170518-fc9532aeaaa73c49e50f1052f210adfda0d0c3ed.tar.bz2
ramips: add HAME MPR-A2 support
This patch adds support for HAME MPR-A2 router using a DTS file. The platform is Ralink RT5350. http://wiki.openwrt.org/toh/hame/mpr-a2 Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> SVN-Revision: 36898
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/02_network1
-rw-r--r--target/linux/ramips/base-files/lib/preinit/06_set_iface_mac1
-rw-r--r--target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips12
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/MPRA2.dts121
-rw-r--r--target/linux/ramips/image/Makefile10
-rw-r--r--target/linux/ramips/rt305x/profiles/hame.mk21
11 files changed, 174 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index be2fa56..894be0f 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -55,6 +55,9 @@ get_status_led() {
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
+ mpr-a2)
+ status_led="mpr-a2:red:power"
+ ;;
nbg-419n)
status_led="nbg-419n:green:power"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 41dabd9..810dddf 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -77,6 +77,7 @@ case "$FIRMWARE" in
freestation5 | \
hw550-3g | \
mofi3500-3gn | \
+ mpr-a2 | \
pwh2004 | \
nbg-419n | \
nw718 | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index ec03188..608816f 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -94,6 +94,9 @@ case $board in
mofi3500-3gn)
set_usb_led "mofi3500-3gn:green:usb"
;;
+ mpr-a2)
+ set_wifi_led "mpr-a2:blue:system"
+ ;;
mzk-w300nh2)
set_wifi_led "mzkw300nh2:amber:wlan"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index fe81899..b45b0ca 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -172,6 +172,7 @@ ramips_setup_macs()
broadway | \
dir-620-d1 | \
f5d8235-v1 | \
+ mpr-a2 | \
mzk-w300nh2 | \
nw718 | \
psr-680w | \
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 022f72e..bd1dac0 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -26,6 +26,7 @@ preinit_set_mac_address() {
dir-620-a1 |\
esr-9753 |\
freestation5 |\
+ mpr-a2 | \
nw718 |\
psr-680w |\
rt-n56u |\
diff --git a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
index c8b7f2a..edc5a12 100644
--- a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
+++ b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
@@ -6,6 +6,18 @@
. /lib/ramips.sh
ramips_set_preinit_iface() {
+ local board=$(ramips_board_name)
+
+ case "$board" in
+ mpr-a2)
+ #TODO
+ # Ralink ethernet driver cannot re-open ethernet if it is opened during preinit and then closed.
+ # Looks like Ralink ethernet driver has a problem.
+ # Temporary solution is not to open ethernet during preinit.
+ return 0
+ ;;
+ esac
+
ifname=eth0
}
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 03ae25b..c5f216f 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -115,6 +115,9 @@ ramips_board_detect() {
*"MoFi Network MOFI3500-3GN")
name="mofi3500-3gn"
;;
+ *"HAME MPR-A2")
+ name="mpr-a2"
+ ;;
*"NBG-419N")
name="nbg-419n"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2d24f18..eaa7e64 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -43,6 +43,7 @@ platform_check_image() {
freestation5 | \
hw550-3g | \
mofi3500-3gn | \
+ mpr-a2 | \
mzk-w300nh2 | \
nbg-419n | \
nw718 | \
diff --git a/target/linux/ramips/dts/MPRA2.dts b/target/linux/ramips/dts/MPRA2.dts
new file mode 100644
index 0000000..8fb226b
--- /dev/null
+++ b/target/linux/ramips/dts/MPRA2.dts
@@ -0,0 +1,121 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "MPRA2", "ralink,rt5350-soc";
+ model = "HAME MPR-A2";
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
+ ralink,gpiomux = "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl064k";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+ };
+
+ esw@10110000 {
+ status = "okay";
+ ralink,portmap = <0x2f>;
+ };
+
+ wmac@10180000 {
+ status = "okay";
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ system {
+ label = "mpr-a2:blue:system";
+ gpios = <&gpio0 20 1>;
+ };
+ power {
+ label = "mpr-a2:red:power";
+ gpios = <&gpio0 17 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ wps {
+ label = "reset";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 7 0>;
+ };
+ root_hub {
+ gpio-export,name = "root_hub";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 0>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index ed7932b..f00eb6c 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -93,7 +93,7 @@ define BuildFirmware/OF
endef
define BuildFirmware/OF/initramfs
- $(call MkImageLzmaDtb,$(2),$(3))
+ $(call MkImageLzmaDtb,$(2),$(3),$(4))
$(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
endef
@@ -113,8 +113,8 @@ BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(
# $(2) = lowercase board name
# $(3) = dts file
ralink_default_fw_size_8M=8060928
-BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M))
-BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M),$(4))
+BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
# Build images for a custom sized flash layout
# $(1) = squashfs/initramfs
@@ -334,6 +334,9 @@ Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freest
Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
+# Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
+Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
+
Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N)
Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
@@ -461,6 +464,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/FREESTATION5,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
+ $(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))
$(call Image/Build/Profile/NBG-419N,$(1))
$(call Image/Build/Profile/NW718,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/hame.mk b/target/linux/ramips/rt305x/profiles/hame.mk
new file mode 100644
index 0000000..1a85be7
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/hame.mk
@@ -0,0 +1,21 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/MPRA2
+ NAME:=HAME MPR-A2
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer \
+ kmod-usb-acm kmod-usb-net kmod-usb-net-asix kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option \
+ usb-modeswitch usb-modeswitch-data comgt
+endef
+
+define Profile/MPRA2/Description
+ Package set for HAME MPR-A2 board
+endef
+
+$(eval $(call Profile,MPRA2))
+