summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--package/mac80211/patches/830-b43-workaround-pcie-bcm4716.patch133
-rw-r--r--target/linux/brcm47xx/patches-3.2/0000-pci-backport.patch2210
-rw-r--r--target/linux/brcm47xx/patches-3.2/0036-bcma-add-the-core-unit-number.patch61
-rw-r--r--target/linux/brcm47xx/patches-3.2/0037-bcma-constants-for-PCI-and-use-them.patch334
-rw-r--r--target/linux/brcm47xx/patches-3.2/0038-bcma-export-bcma_pcie_read.patch35
-rw-r--r--target/linux/brcm47xx/patches-3.2/0039-bcma-make-some-functions-__devinit.patch111
-rw-r--r--target/linux/brcm47xx/patches-3.2/0040-bcma-add-PCIe-host-controller.patch845
-rw-r--r--target/linux/brcm47xx/patches-3.2/0041-bcma-add-bus-num-counter.patch59
-rw-r--r--target/linux/brcm47xx/patches-3.2/0042-bcma-add-new-PCI-ID.patch24
-rw-r--r--target/linux/brcm47xx/patches-3.2/0043-bcma-add-extra-sprom-check.patch63
-rw-r--r--target/linux/brcm47xx/patches-3.2/0046-bcma-complete-workaround-for-BCMA43224.patch52
-rw-r--r--target/linux/brcm47xx/patches-3.2/601-mips-remove-pci-collision-check.patch18
12 files changed, 3927 insertions, 18 deletions
diff --git a/package/mac80211/patches/830-b43-workaround-pcie-bcm4716.patch b/package/mac80211/patches/830-b43-workaround-pcie-bcm4716.patch
new file mode 100644
index 0000000..834a253
--- /dev/null
+++ b/package/mac80211/patches/830-b43-workaround-pcie-bcm4716.patch
@@ -0,0 +1,133 @@
+From 8a0e33bd81eafd86252acf7d7ff1bd5362208d7a Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 21 Jan 2012 18:48:38 +0100
+Subject: [PATCH 33/34] b43: add workaround for b43 on pcie bus of bcm4716.
+
+bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder
+transactions. As a fix, a read after write is performed on certain
+places in the code. Older chips and the newer 5357 family don't require
+this fix.
+This code is based on the brcmsmac driver.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/net/wireless/b43/b43.h | 25 +++++++++++++++++++++++++
+ drivers/net/wireless/b43/bus.h | 10 ++++++++++
+ drivers/net/wireless/b43/phy_common.c | 6 ++++++
+ drivers/net/wireless/b43/phy_n.c | 10 +++++-----
+ 4 files changed, 46 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/wireless/b43/b43.h
++++ b/drivers/net/wireless/b43/b43.h
+@@ -1016,6 +1016,31 @@ static inline bool b43_using_pio_transfe
+ return dev->__using_pio_transfers;
+ }
+
++/*
++ * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder
++ * transactions. As a fix, a read after write is performed on certain places
++ * in the code. Older chips and the newer 5357 family don't require this fix.
++ */
++#ifdef CONFIG_BCM47XX
++#include <asm/mach-bcm47xx/bcm47xx.h>
++static inline void b43_wflush16(struct b43_wldev *dev, u16 offset, u16 value)
++{
++ if (b43_bus_host_is_pci(dev->dev) &&
++ (bcm47xx_bus.bcma.bus.chipinfo.id == 0x4716 ||
++ bcm47xx_bus.bcma.bus.chipinfo.id == 0x5300)) {
++ b43_write16(dev, offset, value);
++ b43_read16(dev, offset);
++ } else {
++ b43_write16(dev, offset, value);
++ }
++}
++#else
++static inline void b43_wflush16(struct b43_wldev *dev, u16 offset, u16 value)
++{
++ b43_write16(dev, offset, value);
++}
++#endif
++
+ /* Message printing */
+ __printf(2, 3) void b43info(struct b43_wl *wl, const char *fmt, ...);
+ __printf(2, 3) void b43err(struct b43_wl *wl, const char *fmt, ...);
+--- a/drivers/net/wireless/b43/bus.h
++++ b/drivers/net/wireless/b43/bus.h
+@@ -60,6 +60,16 @@ static inline bool b43_bus_host_is_sdio(
+ return (dev->bus_type == B43_BUS_SSB &&
+ dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO);
+ }
++static inline bool b43_bus_host_is_pci(struct b43_bus_dev *dev)
++{
++ if (dev->bus_type == B43_BUS_SSB)
++ return (dev->sdev->bus->bustype == SSB_BUSTYPE_PCI);
++#ifdef CONFIG_B43_BCMA
++ if (dev->bus_type == B43_BUS_BCMA)
++ return (dev->bdev->bus->hosttype == BCMA_HOSTTYPE_PCI);
++#endif
++ return false;
++}
+
+ struct b43_bus_dev *b43_bus_dev_bcma_init(struct bcma_device *core);
+ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev);
+--- a/drivers/net/wireless/b43/phy_common.c
++++ b/drivers/net/wireless/b43/phy_common.c
+@@ -251,6 +251,12 @@ void b43_phy_write(struct b43_wldev *dev
+ {
+ assert_mac_suspended(dev);
+ dev->phy.ops->phy_write(dev, reg, value);
++#ifdef CONFIG_BCM47XX
++ if (b43_bus_host_is_pci(dev->dev) && reg == 0x72) {
++ b43_read16(dev, B43_MMIO_PHY_VER);
++ return;
++ }
++#endif
+ if (++dev->phy.writes_counter == B43_MAX_WRITES_IN_ROW) {
+ b43_read16(dev, B43_MMIO_PHY_VER);
+ dev->phy.writes_counter = 0;
+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -4104,14 +4104,14 @@ static inline void check_phyreg(struct b
+ static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg)
+ {
+ check_phyreg(dev, reg);
+- b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
++ b43_wflush16(dev, B43_MMIO_PHY_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_PHY_DATA);
+ }
+
+ static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
+ {
+ check_phyreg(dev, reg);
+- b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
++ b43_wflush16(dev, B43_MMIO_PHY_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_PHY_DATA, value);
+ }
+
+@@ -4119,7 +4119,7 @@ static void b43_nphy_op_maskset(struct b
+ u16 set)
+ {
+ check_phyreg(dev, reg);
+- b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
++ b43_wflush16(dev, B43_MMIO_PHY_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_PHY_DATA,
+ (b43_read16(dev, B43_MMIO_PHY_DATA) & mask) | set);
+ }
+@@ -4131,7 +4131,7 @@ static u16 b43_nphy_op_radio_read(struct
+ /* N-PHY needs 0x100 for read access */
+ reg |= 0x100;
+
+- b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
++ b43_wflush16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
+ }
+
+@@ -4140,7 +4140,7 @@ static void b43_nphy_op_radio_write(stru
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+
+- b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
++ b43_wflush16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
+ }
+
diff --git a/target/linux/brcm47xx/patches-3.2/0000-pci-backport.patch b/target/linux/brcm47xx/patches-3.2/0000-pci-backport.patch
new file mode 100644
index 0000000..5a6a9ae
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0000-pci-backport.patch
@@ -0,0 +1,2210 @@
+--- a/Documentation/feature-removal-schedule.txt
++++ b/Documentation/feature-removal-schedule.txt
+@@ -551,3 +551,15 @@ When: 3.5
+ Why: The iwlagn module has been renamed iwlwifi. The alias will be around
+ for backward compatibility for several cycles and then dropped.
+ Who: Don Fry <donald.h.fry@intel.com>
++
++----------------------------
++
++What: pci_scan_bus_parented()
++When: 3.5
++Why: The pci_scan_bus_parented() interface creates a new root bus. The
++ bus is created with default resources (ioport_resource and
++ iomem_resource) that are always wrong, so we rely on arch code to
++ correct them later. Callers of pci_scan_bus_parented() should
++ convert to using pci_scan_root_bus() so they can supply a list of
++ bus resources when the bus is created.
++Who: Bjorn Helgaas <bhelgaas@google.com>
+--- a/arch/alpha/kernel/pci.c
++++ b/arch/alpha/kernel/pci.c
+@@ -281,27 +281,9 @@ pcibios_fixup_device_resources(struct pc
+ void __devinit
+ pcibios_fixup_bus(struct pci_bus *bus)
+ {
+- /* Propagate hose info into the subordinate devices. */
+-
+- struct pci_controller *hose = bus->sysdata;
+ struct pci_dev *dev = bus->self;
+
+- if (!dev) {
+- /* Root bus. */
+- u32 pci_mem_end;
+- u32 sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0;
+- unsigned long end;
+-
+- bus->resource[0] = hose->io_space;
+- bus->resource[1] = hose->mem_space;
+-
+- /* Adjust hose mem_space limit to prevent PCI allocations
+- in the iommu windows. */
+- pci_mem_end = min((u32)__direct_map_base, sg_base) - 1;
+- end = hose->mem_space->start + pci_mem_end;
+- if (hose->mem_space->end > end)
+- hose->mem_space->end = end;
+- } else if (pci_probe_only &&
++ if (pci_probe_only && dev &&
+ (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_read_bridge_bases(bus);
+ pcibios_fixup_device_resources(dev, bus);
+@@ -414,13 +396,31 @@ void __init
+ common_init_pci(void)
+ {
+ struct pci_controller *hose;
++ struct list_head resources;
+ struct pci_bus *bus;
+ int next_busno;
+ int need_domain_info = 0;
++ u32 pci_mem_end;
++ u32 sg_base;
++ unsigned long end;
+
+ /* Scan all of the recorded PCI controllers. */
+ for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
+- bus = pci_scan_bus(next_busno, alpha_mv.pci_ops, hose);
++ sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0;
++
++ /* Adjust hose mem_space limit to prevent PCI allocations
++ in the iommu windows. */
++ pci_mem_end = min((u32)__direct_map_base, sg_base) - 1;
++ end = hose->mem_space->start + pci_mem_end;
++ if (hose->mem_space->end > end)
++ hose->mem_space->end = end;
++
++ INIT_LIST_HEAD(&resources);
++ pci_add_resource(&resources, hose->io_space);
++ pci_add_resource(&resources, hose->mem_space);
++
++ bus = pci_scan_root_bus(NULL, next_busno, alpha_mv.pci_ops,
++ hose, &resources);
+ hose->bus = bus;
+ hose->need_domain_info = need_domain_info;
+ next_busno = bus->subordinate + 1;
+--- a/arch/arm/common/it8152.c
++++ b/arch/arm/common/it8152.c
+@@ -299,8 +299,8 @@ int __init it8152_pci_setup(int nr, stru
+ goto err1;
+ }
+
+- sys->resource[0] = &it8152_io;
+- sys->resource[1] = &it8152_mem;
++ pci_add_resource(&sys->resources, &it8152_io);
++ pci_add_resource(&sys->resources, &it8152_mem);
+
+ if (platform_notify || platform_notify_remove) {
+ printk(KERN_ERR "PCI: Can't use platform_notify\n");
+@@ -352,7 +352,7 @@ void pcibios_set_master(struct pci_dev *
+
+ struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(nr, &it8152_ops, sys);
++ return pci_scan_root_bus(NULL, nr, &it8152_ops, sys, &sys->resources);
+ }
+
+ EXPORT_SYMBOL(dma_set_coherent_mask);
+--- a/arch/arm/common/via82c505.c
++++ b/arch/arm/common/via82c505.c
+@@ -86,7 +86,8 @@ int __init via82c505_setup(int nr, struc
+ struct pci_bus * __init via82c505_scan_bus(int nr, struct pci_sys_data *sysdata)
+ {
+ if (nr == 0)
+- return pci_scan_bus(0, &via82c505_ops, sysdata);
++ return pci_scan_root_bus(NULL, 0, &via82c505_ops, sysdata,
++ &sysdata->resources);
+
+ return NULL;
+ }
+--- a/arch/arm/include/asm/mach/pci.h
++++ b/arch/arm/include/asm/mach/pci.h
+@@ -40,7 +40,7 @@ struct pci_sys_data {
+ u64 mem_offset; /* bus->cpu memory mapping offset */
+ unsigned long io_offset; /* bus->cpu IO mapping offset */
+ struct pci_bus *bus; /* PCI bus */
+- struct resource *resource[3]; /* Primary PCI bus resources */
++ struct list_head resources; /* root bus resources (apertures) */
+ /* Bridge swizzling */
+ u8 (*swizzle)(struct pci_dev *, u8 *);
+ /* IRQ mapping */
+--- a/arch/arm/kernel/bios32.c
++++ b/arch/arm/kernel/bios32.c
+@@ -316,21 +316,6 @@ pdev_fixup_device_resources(struct pci_s
+ }
+ }
+
+-static void __devinit
+-pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root)
+-{
+- struct pci_dev *dev = bus->self;
+- int i;
+-
+- if (!dev) {
+- /*
+- * Assign root bus resources.
+- */
+- for (i = 0; i < 3; i++)
+- bus->resource[i] = root->resource[i];
+- }
+-}
+-
+ /*
+ * pcibios_fixup_bus - Called after each bus is probed,
+ * but before its children are examined.
+@@ -341,8 +326,6 @@ void pcibios_fixup_bus(struct pci_bus *b
+ struct pci_dev *dev;
+ u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK;
+
+- pbus_assign_bus_resources(bus, root);
+-
+ /*
+ * Walk the devices on this bus, working out what we can
+ * and can't support.
+@@ -508,12 +491,18 @@ static void __init pcibios_init_hw(struc
+ sys->busnr = busnr;
+ sys->swizzle = hw->swizzle;
+ sys->map_irq = hw->map_irq;
+- sys->resource[0] = &ioport_resource;
+- sys->resource[1] = &iomem_resource;
++ INIT_LIST_HEAD(&sys->resources);
+
+ ret = hw->setup(nr, sys);
+
+ if (ret > 0) {
++ if (list_empty(&sys->resources)) {
++ pci_add_resource(&sys->resources,
++ &ioport_resource);
++ pci_add_resource(&sys->resources,
++ &iomem_resource);
++ }
++
+ sys->bus = hw->scan(nr, sys);
+
+ if (!sys->bus)
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -151,13 +151,12 @@ static int cns3xxx_pci_setup(int nr, str
+ struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
+ struct resource *res_io = &cnspci->res_io;
+ struct resource *res_mem = &cnspci->res_mem;
+- struct resource **sysres = sys->resource;
+
+ BUG_ON(request_resource(&iomem_resource, res_io) ||
+ request_resource(&iomem_resource, res_mem));
+
+- sysres[0] = res_io;
+- sysres[1] = res_mem;
++ pci_add_resource(&sys->resources, res_io);
++ pci_add_resource(&sys->resources, res_mem);
+
+ return 1;
+ }
+@@ -169,7 +168,8 @@ static struct pci_ops cns3xxx_pcie_ops =
+
+ static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &cns3xxx_pcie_ops, sys,
++ &sys->resources);
+ }
+
+ static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+--- a/arch/arm/mach-dove/pcie.c
++++ b/arch/arm/mach-dove/pcie.c
+@@ -69,7 +69,7 @@ static int __init dove_pcie_setup(int nr
+ pp->res[0].flags = IORESOURCE_IO;
+ if (request_resource(&ioport_resource, &pp->res[0]))
+ panic("Request PCIe IO resource failed\n");
+- sys->resource[0] = &pp->res[0];
++ pci_add_resource(&sys->resources, &pp->res[0]);
+
+ /*
+ * IORESOURCE_MEM
+@@ -88,9 +88,7 @@ static int __init dove_pcie_setup(int nr
+ pp->res[1].flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res[1]))
+ panic("Request PCIe Memory resource failed\n");
+- sys->resource[1] = &pp->res[1];
+-
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &pp->res[1]);
+
+ return 1;
+ }
+@@ -184,7 +182,8 @@ dove_pcie_scan_bus(int nr, struct pci_sy
+ struct pci_bus *bus;
+
+ if (nr < num_pcie_ports) {
+- bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
++ bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
++ &sys->resources);
+ } else {
+ bus = NULL;
+ BUG();
+--- a/arch/arm/mach-footbridge/dc21285.c
++++ b/arch/arm/mach-footbridge/dc21285.c
+@@ -275,9 +275,9 @@ int __init dc21285_setup(int nr, struct
+ allocate_resource(&iomem_resource, &res[0], 0x40000000,
+ 0x80000000, 0xffffffff, 0x40000000, NULL, NULL);
+
+- sys->resource[0] = &ioport_resource;
+- sys->resource[1] = &res[0];
+- sys->resource[2] = &res[1];
++ pci_add_resource(&sys->resources, &ioport_resource);
++ pci_add_resource(&sys->resources, &res[0]);
++ pci_add_resource(&sys->resources, &res[1]);
+ sys->mem_offset = DC21285_PCI_MEM;
+
+ return 1;
+@@ -285,7 +285,7 @@ int __init dc21285_setup(int nr, struct
+
+ struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(0, &dc21285_ops, sys);
++ return pci_scan_root_bus(NULL, 0, &dc21285_ops, sys, &sys->resources);
+ }
+
+ #define dc21285_request_irq(_a, _b, _c, _d, _e) \
+--- a/arch/arm/mach-integrator/pci_v3.c
++++ b/arch/arm/mach-integrator/pci_v3.c
+@@ -359,7 +359,7 @@ static struct resource pre_mem = {
+ .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
+ };
+
+-static int __init pci_v3_setup_resources(struct resource **resource)
++static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
+ {
+ if (request_resource(&iomem_resource, &non_mem)) {
+ printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
+@@ -374,13 +374,13 @@ static int __init pci_v3_setup_resources
+ }
+
+ /*
+- * bus->resource[0] is the IO resource for this bus
+- * bus->resource[1] is the mem resource for this bus
+- * bus->resource[2] is the prefetch mem resource for this bus
++ * the IO resource for this bus
++ * the mem resource for this bus
++ * the prefetch mem resource for this bus
+ */
+- resource[0] = &ioport_resource;
+- resource[1] = &non_mem;
+- resource[2] = &pre_mem;
++ pci_add_resource(&sys->resources, &ioport_resource);
++ pci_add_resource(&sys->resources, &non_mem);
++ pci_add_resource(&sys->resources, &pre_mem);
+
+ return 1;
+ }
+@@ -481,7 +481,7 @@ int __init pci_v3_setup(int nr, struct p
+
+ if (nr == 0) {
+ sys->mem_offset = PHYS_PCI_MEM_BASE;
+- ret = pci_v3_setup_resources(sys->resource);
++ ret = pci_v3_setup_resources(sys);
+ }
+
+ return ret;
+@@ -489,7 +489,8 @@ int __init pci_v3_setup(int nr, struct p
+
+ struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &pci_v3_ops, sys,
++ &sys->resources);
+ }
+
+ /*
+--- a/arch/arm/mach-iop13xx/pci.c
++++ b/arch/arm/mach-iop13xx/pci.c
+@@ -537,14 +537,14 @@ struct pci_bus *iop13xx_scan_bus(int nr,
+ while(time_before(jiffies, atux_trhfa_timeout))
+ udelay(100);
+
+- bus = pci_bus_atux = pci_scan_bus(sys->busnr,
+- &iop13xx_atux_ops,
+- sys);
++ bus = pci_bus_atux = pci_scan_root_bus(NULL, sys->busnr,
++ &iop13xx_atux_ops,
++ sys, &sys->resources);
+ break;
+ case IOP13XX_INIT_ATU_ATUE:
+- bus = pci_bus_atue = pci_scan_bus(sys->busnr,
+- &iop13xx_atue_ops,
+- sys);
++ bus = pci_bus_atue = pci_scan_root_bus(NULL, sys->busnr,
++ &iop13xx_atue_ops,
++ sys, &sys->resources);
+ break;
+ }
+
+@@ -1084,9 +1084,8 @@ int iop13xx_pci_setup(int nr, struct pci
+ request_resource(&ioport_resource, &res[0]);
+ request_resource(&iomem_resource, &res[1]);
+
+- sys->resource[0] = &res[0];
+- sys->resource[1] = &res[1];
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &res[0]);
++ pci_add_resource(&sys->resources, &res[1]);
+
+ return 1;
+ }
+--- a/arch/arm/mach-ixp2000/enp2611.c
++++ b/arch/arm/mach-ixp2000/enp2611.c
+@@ -145,7 +145,8 @@ static struct pci_ops enp2611_pci_ops =
+ static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
+ struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(sys->busnr, &enp2611_pci_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys,
++ &sys->resources);
+ }
+
+ static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
+--- a/arch/arm/mach-ixp2000/pci.c
++++ b/arch/arm/mach-ixp2000/pci.c
+@@ -132,7 +132,8 @@ static struct pci_ops ixp2000_pci_ops =
+
+ struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+ {
+- return pci_scan_bus(sysdata->busnr, &ixp2000_pci_ops, sysdata);
++ return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops,
++ sysdata, &sysdata->resources);
+ }
+
+
+@@ -242,9 +243,8 @@ int ixp2000_pci_setup(int nr, struct pci
+ if (nr >= 1)
+ return 0;
+
+- sys->resource[0] = &ixp2000_pci_io_space;
+- sys->resource[1] = &ixp2000_pci_mem_space;
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &ixp2000_pci_io_space);
++ pci_add_resource(&sys->resources, &ixp2000_pci_mem_space);
+
+ return 1;
+ }
+--- a/arch/arm/mach-ixp23xx/pci.c
++++ b/arch/arm/mach-ixp23xx/pci.c
+@@ -143,7 +143,8 @@ struct pci_ops ixp23xx_pci_ops = {
+
+ struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+ {
+- return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
++ return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops,
++ sysdata, &sysdata->resources);
+ }
+
+ int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+@@ -280,9 +281,8 @@ int ixp23xx_pci_setup(int nr, struct pci
+ if (nr >= 1)
+ return 0;
+
+- sys->resource[0] = &ixp23xx_pci_io_space;
+- sys->resource[1] = &ixp23xx_pci_mem_space;
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &ixp23xx_pci_io_space);
++ pci_add_resource(&sys->resources, &ixp23xx_pci_mem_space);
+
+ return 1;
+ }
+--- a/arch/arm/mach-ixp4xx/common-pci.c
++++ b/arch/arm/mach-ixp4xx/common-pci.c
+@@ -472,9 +472,8 @@ int ixp4xx_setup(int nr, struct pci_sys_
+ request_resource(&ioport_resource, &res[0]);
+ request_resource(&iomem_resource, &res[1]);
+
+- sys->resource[0] = &res[0];
+- sys->resource[1] = &res[1];
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &res[0]);
++ pci_add_resource(&sys->resources, &res[1]);
+
+ platform_notify = ixp4xx_pci_platform_notify;
+ platform_notify_remove = ixp4xx_pci_platform_notify_remove;
+@@ -484,7 +483,8 @@ int ixp4xx_setup(int nr, struct pci_sys_
+
+ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &ixp4xx_ops, sys,
++ &sys->resources);
+ }
+
+ int dma_set_coherent_mask(struct device *dev, u64 mask)
+--- a/arch/arm/mach-kirkwood/pcie.c
++++ b/arch/arm/mach-kirkwood/pcie.c
+@@ -198,9 +198,8 @@ static int __init kirkwood_pcie_setup(in
+ if (request_resource(&iomem_resource, &pp->res[1]))
+ panic("Request PCIe%d Memory resource failed\n", index);
+
+- sys->resource[0] = &pp->res[0];
+- sys->resource[1] = &pp->res[1];
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &pp->res[0]);
++ pci_add_resource(&sys->resources, &pp->res[1]);
+ sys->io_offset = 0;
+
+ /*
+@@ -236,7 +235,8 @@ kirkwood_pcie_scan_bus(int nr, struct pc
+ struct pci_bus *bus;
+
+ if (nr < num_pcie_ports) {
+- bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
++ bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
++ &sys->resources);
+ } else {
+ bus = NULL;
+ BUG();
+--- a/arch/arm/mach-ks8695/pci.c
++++ b/arch/arm/mach-ks8695/pci.c
+@@ -143,7 +143,8 @@ static struct pci_ops ks8695_pci_ops = {
+
+ static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &ks8695_pci_ops, sys,
++ &sys->resources);
+ }
+
+ static struct resource pci_mem = {
+@@ -168,9 +169,8 @@ static int __init ks8695_pci_setup(int n
+ request_resource(&iomem_resource, &pci_mem);
+ request_resource(&ioport_resource, &pci_io);
+
+- sys->resource[0] = &pci_io;
+- sys->resource[1] = &pci_mem;
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &pci_io);
++ pci_add_resource(&sys->resources, &pci_mem);
+
+ /* Assign and enable processor bridge */
+ ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
+--- a/arch/arm/mach-mv78xx0/pcie.c
++++ b/arch/arm/mach-mv78xx0/pcie.c
+@@ -155,9 +155,8 @@ static int __init mv78xx0_pcie_setup(int
+ orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+ orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info);
+
+- sys->resource[0] = &pp->res[0];
+- sys->resource[1] = &pp->res[1];
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &pp->res[0]);
++ pci_add_resource(&sys->resources, &pp->res[1]);
+
+ return 1;
+ }
+@@ -251,7 +250,8 @@ mv78xx0_pcie_scan_bus(int nr, struct pci
+ struct pci_bus *bus;
+
+ if (nr < num_pcie_ports) {
+- bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
++ bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
++ &sys->resources);
+ } else {
+ bus = NULL;
+ BUG();
+--- a/arch/arm/mach-orion5x/pci.c
++++ b/arch/arm/mach-orion5x/pci.c
+@@ -176,7 +176,7 @@ static int __init pcie_setup(struct pci_
+ res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCIe IO resource failed\n");
+- sys->resource[0] = &res[0];
++ pci_add_resource(&sys->resources, &res[0]);
+
+ /*
+ * IORESOURCE_MEM
+@@ -187,9 +187,8 @@ static int __init pcie_setup(struct pci_
+ res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCIe Memory resource failed\n");
+- sys->resource[1] = &res[1];
++ pci_add_resource(&sys->resources, &res[1]);
+
+- sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+@@ -505,7 +504,7 @@ static int __init pci_setup(struct pci_s
+ res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCI IO resource failed\n");
+- sys->resource[0] = &res[0];
++ pci_add_resource(&sys->resources, &res[0]);
+
+ /*
+ * IORESOURCE_MEM
+@@ -516,9 +515,8 @@ static int __init pci_setup(struct pci_s
+ res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCI Memory resource failed\n");
+- sys->resource[1] = &res[1];
++ pci_add_resource(&sys->resources, &res[1]);
+
+- sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+@@ -579,9 +577,11 @@ struct pci_bus __init *orion5x_pci_sys_s
+ struct pci_bus *bus;
+
+ if (nr == 0) {
+- bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
++ bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
++ &sys->resources);
+ } else if (nr == 1 && !orion5x_pci_disabled) {
+- bus = pci_scan_bus(sys->busnr, &pci_ops, sys);
++ bus = pci_scan_root_bus(NULL, sys->busnr, &pci_ops, sys,
++ &sys->resources);
+ } else {
+ bus = NULL;
+ BUG();
+--- a/arch/arm/mach-sa1100/pci-nanoengine.c
++++ b/arch/arm/mach-sa1100/pci-nanoengine.c
+@@ -131,7 +131,8 @@ static int __init pci_nanoengine_map_irq
+
+ struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(sys->busnr, &pci_nano_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &pci_nano_ops, sys,
++ &sys->resources);
+ }
+
+ static struct resource pci_io_ports = {
+@@ -226,7 +227,7 @@ static struct resource pci_prefetchable_
+ .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
+ };
+
+-static int __init pci_nanoengine_setup_resources(struct resource **resource)
++static int __init pci_nanoengine_setup_resources(struct pci_sys_data *sys)
+ {
+ if (request_resource(&ioport_resource, &pci_io_ports)) {
+ printk(KERN_ERR "PCI: unable to allocate io port region\n");
+@@ -243,9 +244,9 @@ static int __init pci_nanoengine_setup_r
+ printk(KERN_ERR "PCI: unable to allocate prefetchable\n");
+ return -EBUSY;
+ }
+- resource[0] = &pci_io_ports;
+- resource[1] = &pci_non_prefetchable_memory;
+- resource[2] = &pci_prefetchable_memory;
++ pci_add_resource(&sys->resources, &pci_io_ports);
++ pci_add_resource(&sys->resources, &pci_non_prefetchable_memory);
++ pci_add_resource(&sys->resources, &pci_prefetchable_memory);
+
+ return 1;
+ }
+@@ -260,7 +261,7 @@ int __init pci_nanoengine_setup(int nr,
+ if (nr == 0) {
+ sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
+ sys->io_offset = 0x400;
+- ret = pci_nanoengine_setup_resources(sys->resource);
++ ret = pci_nanoengine_setup_resources(sys);
+ /* Enable alternate memory bus master mode, see
+ * "Intel StrongARM SA1110 Developer's Manual",
+ * section 10.8, "Alternate Memory Bus Master Mode". */
+--- a/arch/arm/mach-tegra/pcie.c
++++ b/arch/arm/mach-tegra/pcie.c
+@@ -409,7 +409,7 @@ static int tegra_pcie_setup(int nr, stru
+ pp->res[0].flags = IORESOURCE_IO;
+ if (request_resource(&ioport_resource, &pp->res[0]))
+ panic("Request PCIe IO resource failed\n");
+- sys->resource[0] = &pp->res[0];
++ pci_add_resource(&sys->resources, &pp->res[0]);
+
+ /*
+ * IORESOURCE_MEM
+@@ -428,7 +428,7 @@ static int tegra_pcie_setup(int nr, stru
+ pp->res[1].flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res[1]))
+ panic("Request PCIe Memory resource failed\n");
+- sys->resource[1] = &pp->res[1];
++ pci_add_resource(&sys->resources, &pp->res[1]);
+
+ /*
+ * IORESOURCE_MEM | IORESOURCE_PREFETCH
+@@ -447,7 +447,7 @@ static int tegra_pcie_setup(int nr, stru
+ pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ if (request_resource(&iomem_resource, &pp->res[2]))
+ panic("Request PCIe Prefetch Memory resource failed\n");
+- sys->resource[2] = &pp->res[2];
++ pci_add_resource(&sys->resources, &pp->res[2]);
+
+ return 1;
+ }
+@@ -468,7 +468,8 @@ static struct pci_bus __init *tegra_pcie
+ pp = tegra_pcie.port + nr;
+ pp->root_bus_nr = sys->busnr;
+
+- return pci_scan_bus(sys->busnr, &tegra_pcie_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys,
++ &sys->resources);
+ }
+
+ static struct hw_pci tegra_pcie_hw __initdata = {
+--- a/arch/arm/mach-versatile/pci.c
++++ b/arch/arm/mach-versatile/pci.c
+@@ -191,7 +191,7 @@ static struct resource pre_mem = {
+ .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
+ };
+
+-static int __init pci_versatile_setup_resources(struct resource **resource)
++static int __init pci_versatile_setup_resources(struct list_head *resources)
+ {
+ int ret = 0;
+
+@@ -215,13 +215,13 @@ static int __init pci_versatile_setup_re
+ }
+
+ /*
+- * bus->resource[0] is the IO resource for this bus
+- * bus->resource[1] is the mem resource for this bus
+- * bus->resource[2] is the prefetch mem resource for this bus
++ * the IO resource for this bus
++ * the mem resource for this bus
++ * the prefetch mem resource for this bus
+ */
+- resource[0] = &io_mem;
+- resource[1] = &non_mem;
+- resource[2] = &pre_mem;
++ pci_add_resource(resources, &io_mem);
++ pci_add_resource(resources, &non_mem);
++ pci_add_resource(resources, &pre_mem);
+
+ goto out;
+
+@@ -250,7 +250,7 @@ int __init pci_versatile_setup(int nr, s
+
+ if (nr == 0) {
+ sys->mem_offset = 0;
+- ret = pci_versatile_setup_resources(sys->resource);
++ ret = pci_versatile_setup_resources(&sys->resources);
+ if (ret < 0) {
+ printk("pci_versatile_setup: resources... oops?\n");
+ goto out;
+@@ -306,7 +306,8 @@ int __init pci_versatile_setup(int nr, s
+
+ struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &pci_versatile_ops, sys,
++ &sys->resources);
+ }
+
+ void __init pci_versatile_preinit(void)
+--- a/arch/arm/plat-iop/pci.c
++++ b/arch/arm/plat-iop/pci.c
+@@ -215,16 +215,16 @@ int iop3xx_pci_setup(int nr, struct pci_
+ sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
+ sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR;
+
+- sys->resource[0] = &res[0];
+- sys->resource[1] = &res[1];
+- sys->resource[2] = NULL;
++ pci_add_resource(&sys->resources, &res[0]);
++ pci_add_resource(&sys->resources, &res[1]);
+
+ return 1;
+ }
+
+ struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+- return pci_scan_bus(sys->busnr, &iop3xx_ops, sys);
++ return pci_scan_root_bus(NULL, sys->busnr, &iop3xx_ops, sys,
++ &sys->resources);
+ }
+
+ void __init iop3xx_atu_setup(void)
+--- a/arch/frv/mb93090-mb00/pci-vdk.c
++++ b/arch/frv/mb93090-mb00/pci-vdk.c
+@@ -327,11 +327,6 @@ void __init pcibios_fixup_bus(struct pci
+ printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
+ #endif
+
+- if (bus->number == 0) {
+- bus->resource[0] = &pci_ioport_resource;
+- bus->resource[1] = &pci_iomem_resource;
+- }
+-
+ pci_read_bridge_bases(bus);
+
+ if (bus->number == 0) {
+@@ -357,6 +352,7 @@ void __init pcibios_fixup_bus(struct pci
+ int __init pcibios_init(void)
+ {
+ struct pci_ops *dir = NULL;
++ LIST_HEAD(resources);
+
+ if (!mb93090_mb00_detected)
+ return -ENXIO;
+@@ -420,7 +416,10 @@ int __init pcibios_init(void)
+ }
+
+ printk("PCI: Probing PCI hardware\n");
+- pci_root_bus = pci_scan_bus(0, pci_root_ops, NULL);
++ pci_add_resource(&resources, &pci_ioport_resource);
++ pci_add_resource(&resources, &pci_iomem_resource);
++ pci_root_bus = pci_scan_root_bus(NULL, 0, pci_root_ops, NULL,
++ &resources);
+
+ pcibios_irq_init();
+ pcibios_fixup_peer_bridges();
+--- a/arch/ia64/pci/pci.c
++++ b/arch/ia64/pci/pci.c
+@@ -134,6 +134,7 @@ alloc_pci_controller (int seg)
+ struct pci_root_info {
+ struct acpi_device *bridge;
+ struct pci_controller *controller;
++ struct list_head resources;
+ char *name;
+ };
+
+@@ -315,24 +316,13 @@ static __devinit acpi_status add_window(
+ &window->resource);
+ }
+
+- return AE_OK;
+-}
++ /* HP's firmware has a hack to work around a Windows bug.
++ * Ignore these tiny memory ranges */
++ if (!((window->resource.flags & IORESOURCE_MEM) &&
++ (window->resource.end - window->resource.start < 16)))
++ pci_add_resource(&info->resources, &window->resource);
+
+-static void __devinit
+-pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
+-{
+- int i;
+-
+- pci_bus_remove_resources(bus);
+- for (i = 0; i < ctrl->windows; i++) {
+- struct resource *res = &ctrl->window[i].resource;
+- /* HP's firmware has a hack to work around a Windows bug.
+- * Ignore these tiny memory ranges */
+- if ((res->flags & IORESOURCE_MEM) &&
+- (res->end - res->start < 16))
+- continue;
+- pci_bus_add_resource(bus, res, 0);
+- }
++ return AE_OK;
+ }
+
+ struct pci_bus * __devinit
+@@ -343,6 +333,7 @@ pci_acpi_scan_root(struct acpi_pci_root
+ int bus = root->secondary.start;
+ struct pci_controller *controller;
+ unsigned int windows = 0;
++ struct pci_root_info info;
+ struct pci_bus *pbus;
+ char *name;
+ int pxm;
+@@ -359,11 +350,10 @@ pci_acpi_scan_root(struct acpi_pci_root
+ controller->node = pxm_to_node(pxm);
+ #endif
+
++ INIT_LIST_HEAD(&info.resources);
+ acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
+ &windows);
+ if (windows) {
+- struct pci_root_info info;
+-
+ controller->window =
+ kmalloc_node(sizeof(*controller->window) * windows,
+ GFP_KERNEL, controller->node);
+@@ -387,8 +377,14 @@ pci_acpi_scan_root(struct acpi_pci_root
+ * should handle the case here, but it appears that IA64 hasn't
+ * such quirk. So we just ignore the case now.
+ */
+- pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller);
++ pbus = pci_create_root_bus(NULL, bus, &pci_root_ops, controller,
++ &info.resources);
++ if (!pbus) {
++ pci_free_resource_list(&info.resources);
++ return NULL;
++ }
+
++ pbus->subordinate = pci_scan_child_bus(pbus);
+ return pbus;
+
+ out3:
+@@ -504,14 +500,10 @@ pcibios_fixup_bus (struct pci_bus *b)
+ if (b->self) {
+ pci_read_bridge_bases(b);
+ pcibios_fixup_bridge_resources(b->self);
+- } else {
+- pcibios_setup_root_windows(b, b->sysdata);
+ }
+ list_for_each_entry(dev, &b->devices, bus_list)
+ pcibios_fixup_device_resources(dev);
+ platform_pci_fixup_bus(b);
+-
+- return;
+ }
+
+ void __devinit
+--- a/arch/microblaze/include/asm/pci-bridge.h
++++ b/arch/microblaze/include/asm/pci-bridge.h
+@@ -140,7 +140,6 @@ extern void pci_process_bridge_OF_ranges
+ /* Allocate & free a PCI host bridge structure */
+ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+ extern void pcibios_free_controller(struct pci_controller *phb);
+-extern void pcibios_setup_phb_resources(struct pci_controller *hose);
+
+ #endif /* __KERNEL__ */
+ #endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */
+--- a/arch/microblaze/pci/pci-common.c
++++ b/arch/microblaze/pci/pci-common.c
+@@ -1019,7 +1019,6 @@ static void __devinit pcibios_fixup_brid
+ struct pci_dev *dev = bus->self;
+
+ pci_bus_for_each_resource(bus, res, i) {
+- res = bus->resource[i];
+ if (!res)
+ continue;
+ if (!res->flags)
+@@ -1219,7 +1218,6 @@ void pcibios_allocate_bus_resources(stru
+ pci_domain_nr(bus), bus->number);
+
+ pci_bus_for_each_resource(bus, res, i) {
+- res = bus->resource[i];
+ if (!res || !res->flags
+ || res->start > res->end || res->parent)
+ continue;
+@@ -1510,14 +1508,18 @@ int pcibios_enable_device(struct pci_dev
+ return pci_enable_resources(dev, mask);
+ }
+
+-void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
++static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, struct list_head *resources)
+ {
+- struct pci_bus *bus = hose->bus;
+ struct resource *res;
+ int i;
+
+ /* Hookup PHB IO resource */
+- bus->resource[0] = res = &hose->io_resource;
++ res = &hose->io_resource;
++
++ /* Fixup IO space offset */
++ io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
++ res->start = (res->start + io_offset) & 0xffffffffu;
++ res->end = (res->end + io_offset) & 0xffffffffu;
+
+ if (!res->flags) {
+ printk(KERN_WARNING "PCI: I/O resource not set for host"
+@@ -1528,6 +1530,7 @@ void __devinit pcibios_setup_phb_resourc
+ res->end = res->start + IO_SPACE_LIMIT;
+ res->flags = IORESOURCE_IO;
+ }
++ pci_add_resource(resources, res);
+
+ pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n",
+ (unsigned long long)res->start,
+@@ -1550,7 +1553,7 @@ void __devinit pcibios_setup_phb_resourc
+ res->flags = IORESOURCE_MEM;
+
+ }
+- bus->resource[i+1] = res;
++ pci_add_resource(resources, res);
+
+ pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n",
+ i, (unsigned long long)res->start,
+@@ -1573,34 +1576,27 @@ struct device_node *pcibios_get_phb_of_n
+
+ static void __devinit pcibios_scan_phb(struct pci_controller *hose)
+ {
++ LIST_HEAD(resources);
+ struct pci_bus *bus;
+ struct device_node *node = hose->dn;
+- unsigned long io_offset;
+- struct resource *res = &hose->io_resource;
+
+ pr_debug("PCI: Scanning PHB %s\n",
+ node ? node->full_name : "<NO NAME>");
+
+- /* Create an empty bus for the toplevel */
+- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
++ pcibios_setup_phb_resources(hose, &resources);
++
++ bus = pci_scan_root_bus(hose->parent, hose->first_busno,
++ hose->ops, hose, &resources);
+ if (bus == NULL) {
+ printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
+ hose->global_number);
++ pci_free_resource_list(&resources);
+ return;
+ }
+ bus->secondary = hose->first_busno;
+ hose->bus = bus;
+
+- /* Fixup IO space offset */
+- io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+- res->start = (res->start + io_offset) & 0xffffffffu;
+- res->end = (res->end + io_offset) & 0xffffffffu;
+-
+- /* Wire up PHB bus resources */
+- pcibios_setup_phb_resources(hose);
+-
+- /* Scan children */
+- hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
++ hose->last_busno = bus->subordinate;
+ }
+
+ static int __init pcibios_init(void)
+@@ -1614,8 +1610,6 @@ static int __init pcibios_init(void)
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ hose->last_busno = 0xff;
+ pcibios_scan_phb(hose);
+- printk(KERN_INFO "calling pci_bus_add_devices()\n");
+- pci_bus_add_devices(hose->bus);
+ if (next_busno <= hose->last_busno)
+ next_busno = hose->last_busno + 1;
+ }
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -81,6 +81,7 @@ static void __devinit pcibios_scanbus(st
+ {
+ static int next_busno;
+ static int need_domain_info;
++ LIST_HEAD(resources);
+ struct pci_bus *bus;
+
+ if (!hose->iommu)
+@@ -89,7 +90,13 @@ static void __devinit pcibios_scanbus(st
+ if (hose->get_busno && pci_probe_only)
+ next_busno = (*hose->get_busno)();
+
+- bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
++ pci_add_resource(&resources, hose->mem_resource);
++ pci_add_resource(&resources, hose->io_resource);
++ bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
++ &resources);
++ if (!bus)
++ pci_free_resource_list(&resources);
++
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || hose->index;
+@@ -266,15 +273,11 @@ void __devinit pcibios_fixup_bus(struct
+ {
+ /* Propagate hose info into the subordinate devices. */
+
+- struct pci_controller *hose = bus->sysdata;
+ struct list_head *ln;
+ struct pci_dev *dev = bus->self;
+
+- if (!dev) {
+- bus->resource[0] = hose->io_resource;
+- bus->resource[1] = hose->mem_resource;
+- } else if (pci_probe_only &&
+- (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
++ if (pci_probe_only && dev &&
++ (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_read_bridge_bases(bus);
+ pcibios_fixup_device_resources(dev, bus);
+ }
+--- a/arch/mn10300/unit-asb2305/pci.c
++++ b/arch/mn10300/unit-asb2305/pci.c
+@@ -380,11 +380,6 @@ void __devinit pcibios_fixup_bus(struct
+ {
+ struct pci_dev *dev;
+
+- if (bus->number == 0) {
+- bus->resource[0] = &pci_ioport_resource;
+- bus->resource[1] = &pci_iomem_resource;
+- }
+-
+ if (bus->self) {
+ pci_read_bridge_bases(bus);
+ pcibios_fixup_device_resources(bus->self);
+@@ -402,6 +397,8 @@ void __devinit pcibios_fixup_bus(struct
+ */
+ static int __init pcibios_init(void)
+ {
++ LIST_HEAD(resources);
++
+ ioport_resource.start = 0xA0000000;
+ ioport_resource.end = 0xDFFFFFFF;
+ iomem_resource.start = 0xA0000000;
+@@ -423,7 +420,10 @@ static int __init pcibios_init(void)
+ printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
+ MEM_PAGING_REG);
+
+- pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
++ pci_add_resource(&resources, &pci_ioport_resource);
++ pci_add_resource(&resources, &pci_iomem_resource);
++ pci_root_bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL,
++ &resources);
+
+ pcibios_irq_init();
+ pcibios_fixup_irqs();
+--- a/arch/powerpc/include/asm/pci-bridge.h
++++ b/arch/powerpc/include/asm/pci-bridge.h
+@@ -222,7 +222,6 @@ extern void pci_process_bridge_OF_ranges
+ /* Allocate & free a PCI host bridge structure */
+ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+ extern void pcibios_free_controller(struct pci_controller *phb);
+-extern void pcibios_setup_phb_resources(struct pci_controller *hose);
+
+ #ifdef CONFIG_PCI
+ extern int pcibios_vaddr_is_ioport(void __iomem *address);
+--- a/arch/powerpc/kernel/pci-common.c
++++ b/arch/powerpc/kernel/pci-common.c
+@@ -1555,14 +1555,13 @@ int pcibios_enable_device(struct pci_dev
+ return pci_enable_resources(dev, mask);
+ }
+
+-void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
++static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, struct list_head *resources)
+ {
+- struct pci_bus *bus = hose->bus;
+ struct resource *res;
+ int i;
+
+ /* Hookup PHB IO resource */
+- bus->resource[0] = res = &hose->io_resource;
++ res = &hose->io_resource;
+
+ if (!res->flags) {
+ printk(KERN_WARNING "PCI: I/O resource not set for host"
+@@ -1580,6 +1579,7 @@ void __devinit pcibios_setup_phb_resourc
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long)res->flags);
++ pci_add_resource(resources, res);
+
+ /* Hookup PHB Memory resources */
+ for (i = 0; i < 3; ++i) {
+@@ -1597,12 +1597,12 @@ void __devinit pcibios_setup_phb_resourc
+ res->flags = IORESOURCE_MEM;
+ #endif /* CONFIG_PPC32 */
+ }
+- bus->resource[i+1] = res;
+
+ pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long)res->flags);
++ pci_add_resource(resources, res);
+ }
+
+ pr_debug("PCI: PHB MEM offset = %016llx\n",
+@@ -1696,6 +1696,7 @@ struct device_node *pcibios_get_phb_of_n
+ */
+ void __devinit pcibios_scan_phb(struct pci_controller *hose)
+ {
++ LIST_HEAD(resources);
+ struct pci_bus *bus;
+ struct device_node *node = hose->dn;
+ int mode;
+@@ -1703,22 +1704,24 @@ void __devinit pcibios_scan_phb(struct p
+ pr_debug("PCI: Scanning PHB %s\n",
+ node ? node->full_name : "<NO NAME>");
+
++ /* Get some IO space for the new PHB */
++ pcibios_setup_phb_io_space(hose);
++
++ /* Wire up PHB bus resources */
++ pcibios_setup_phb_resources(hose, &resources);
++
+ /* Create an empty bus for the toplevel */
+- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
++ bus = pci_create_root_bus(hose->parent, hose->first_busno,
++ hose->ops, hose, &resources);
+ if (bus == NULL) {
+ pr_err("Failed to create bus for PCI domain %04x\n",
+ hose->global_number);
++ pci_free_resource_list(&resources);
+ return;
+ }
+ bus->secondary = hose->first_busno;
+ hose->bus = bus;
+
+- /* Get some IO space for the new PHB */
+- pcibios_setup_phb_io_space(hose);
+-
+- /* Wire up PHB bus resources */
+- pcibios_setup_phb_resources(hose);
+-
+ /* Get probe mode and perform scan */
+ mode = PCI_PROBE_NORMAL;
+ if (node && ppc_md.pci_probe_mode)
+--- a/arch/powerpc/kernel/pci_64.c
++++ b/arch/powerpc/kernel/pci_64.c
+@@ -131,30 +131,13 @@ EXPORT_SYMBOL_GPL(pcibios_unmap_io_space
+
+ #endif /* CONFIG_HOTPLUG */
+
+-int __devinit pcibios_map_io_space(struct pci_bus *bus)
++static int __devinit pcibios_map_phb_io_space(struct pci_controller *hose)
+ {
+ struct vm_struct *area;
+ unsigned long phys_page;
+ unsigned long size_page;
+ unsigned long io_virt_offset;
+- struct pci_controller *hose;
+-
+- WARN_ON(bus == NULL);
+
+- /* If this not a PHB, nothing to do, page tables still exist and
+- * thus HPTEs will be faulted in when needed
+- */
+- if (bus->self) {
+- pr_debug("IO mapping for PCI-PCI bridge %s\n",
+- pci_name(bus->self));
+- pr_debug(" virt=0x%016llx...0x%016llx\n",
+- bus->resource[0]->start + _IO_BASE,
+- bus->resource[0]->end + _IO_BASE);
+- return 0;
+- }
+-
+- /* Get the host bridge */
+- hose = pci_bus_to_host(bus);
+ phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE);
+ size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE);
+
+@@ -198,11 +181,30 @@ int __devinit pcibios_map_io_space(struc
+
+ return 0;
+ }
++
++int __devinit pcibios_map_io_space(struct pci_bus *bus)
++{
++ WARN_ON(bus == NULL);
++
++ /* If this not a PHB, nothing to do, page tables still exist and
++ * thus HPTEs will be faulted in when needed
++ */
++ if (bus->self) {
++ pr_debug("IO mapping for PCI-PCI bridge %s\n",
++ pci_name(bus->self));
++ pr_debug(" virt=0x%016llx...0x%016llx\n",
++ bus->resource[0]->start + _IO_BASE,
++ bus->resource[0]->end + _IO_BASE);
++ return 0;
++ }
++
++ return pcibios_map_phb_io_space(pci_bus_to_host(bus));
++}
+ EXPORT_SYMBOL_GPL(pcibios_map_io_space);
+
+ void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
+ {
+- pcibios_map_io_space(hose->bus);
++ pcibios_map_phb_io_space(hose);
+ }
+
+ #define IOBASE_BRIDGE_NUMBER 0
+--- a/arch/sh/drivers/pci/pci.c
++++ b/arch/sh/drivers/pci/pci.c
+@@ -36,9 +36,15 @@ static void __devinit pcibios_scanbus(st
+ {
+ static int next_busno;
+ static int need_domain_info;
++ LIST_HEAD(resources);
++ int i;
+ struct pci_bus *bus;
+
+- bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
++ for (i = 0; i < hose->nr_resources; i++)
++ pci_add_resource(&resources, hose->resources + i);
++
++ bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
++ &resources);
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || hose->index;
+@@ -55,6 +61,8 @@ static void __devinit pcibios_scanbus(st
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ pci_enable_bridges(bus);
++ } else {
++ pci_free_resource_list(&resources);
+ }
+ }
+
+@@ -162,16 +170,8 @@ static void pcibios_fixup_device_resourc
+ */
+ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+ {
+- struct pci_dev *dev = bus->self;
++ struct pci_dev *dev;
+ struct list_head *ln;
+- struct pci_channel *hose = bus->sysdata;
+-
+- if (!dev) {
+- int i;
+-
+- for (i = 0; i < hose->nr_resources; i++)
+- bus->resource[i] = hose->resources + i;
+- }
+
+ for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
+ dev = pci_dev_b(ln);
+--- a/arch/sparc/kernel/leon_pci.c
++++ b/arch/sparc/kernel/leon_pci.c
+@@ -19,22 +19,22 @@
+ */
+ void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info)
+ {
++ LIST_HEAD(resources);
+ struct pci_bus *root_bus;
+
+- root_bus = pci_scan_bus_parented(&ofdev->dev, 0, info->ops, info);
+- if (root_bus) {
+- root_bus->resource[0] = &info->io_space;
+- root_bus->resource[1] = &info->mem_space;
+- root_bus->resource[2] = NULL;
+-
+- /* Init all PCI devices into PCI tree */
+- pci_bus_add_devices(root_bus);
++ pci_add_resource(&resources, &info->io_space);
++ pci_add_resource(&resources, &info->mem_space);
+
++ root_bus = pci_scan_root_bus(&ofdev->dev, 0, info->ops, info,
++ &resources);
++ if (root_bus) {
+ /* Setup IRQs of all devices using custom routines */
+ pci_fixup_irqs(pci_common_swizzle, info->map_irq);
+
+ /* Assign devices with resources */
+ pci_assign_unassigned_resources();
++ } else {
++ pci_free_resource_list(&resources);
+ }
+ }
+
+@@ -83,15 +83,6 @@ void __devinit pcibios_fixup_bus(struct
+ int i, has_io, has_mem;
+ u16 cmd;
+
+- /* Generic PCI bus probing sets these to point at
+- * &io{port,mem}_resouce which is wrong for us.
+- */
+- if (pbus->self == NULL) {
+- pbus->resource[0] = &info->io_space;
+- pbus->resource[1] = &info->mem_space;
+- pbus->resource[2] = NULL;
+- }
+-
+ list_for_each_entry(dev, &pbus->devices, bus_list) {
+ /*
+ * We can not rely on that the bootloader has enabled I/O
+--- a/arch/sparc/kernel/pci.c
++++ b/arch/sparc/kernel/pci.c
+@@ -685,23 +685,25 @@ static void __devinit pci_bus_register_o
+ struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm,
+ struct device *parent)
+ {
++ LIST_HEAD(resources);
+ struct device_node *node = pbm->op->dev.of_node;
+ struct pci_bus *bus;
+
+ printk("PCI: Scanning PBM %s\n", node->full_name);
+
+- bus = pci_create_bus(parent, pbm->pci_first_busno, pbm->pci_ops, pbm);
++ pci_add_resource(&resources, &pbm->io_space);
++ pci_add_resource(&resources, &pbm->mem_space);
++ bus = pci_create_root_bus(parent, pbm->pci_first_busno, pbm->pci_ops,
++ pbm, &resources);
+ if (!bus) {
+ printk(KERN_ERR "Failed to create bus for %s\n",
+ node->full_name);
++ pci_free_resource_list(&resources);
+ return NULL;
+ }
+ bus->secondary = pbm->pci_first_busno;
+ bus->subordinate = pbm->pci_last_busno;
+
+- bus->resource[0] = &pbm->io_space;
+- bus->resource[1] = &pbm->mem_space;
+-
+ pci_of_scan_bus(pbm, node, bus);
+ pci_bus_add_devices(bus);
+ pci_bus_register_of_sysfs(bus);
+@@ -711,13 +713,6 @@ struct pci_bus * __devinit pci_scan_one_
+
+ void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
+ {
+- struct pci_pbm_info *pbm = pbus->sysdata;
+-
+- /* Generic PCI bus probing sets these to point at
+- * &io{port,mem}_resouce which is wrong for us.
+- */
+- pbus->resource[0] = &pbm->io_space;
+- pbus->resource[1] = &pbm->mem_space;
+ }
+
+ void pcibios_update_irq(struct pci_dev *pdev, int irq)
+--- a/arch/x86/include/asm/topology.h
++++ b/arch/x86/include/asm/topology.h
+@@ -174,7 +174,7 @@ static inline void arch_fix_phys_package
+ }
+
+ struct pci_bus;
+-void x86_pci_root_bus_res_quirks(struct pci_bus *b);
++void x86_pci_root_bus_resources(int bus, struct list_head *resources);
+
+ #ifdef CONFIG_SMP
+ #define mc_capable() ((boot_cpu_data.x86_max_cores > 1) && \
+--- a/arch/x86/pci/acpi.c
++++ b/arch/x86/pci/acpi.c
+@@ -12,7 +12,7 @@ struct pci_root_info {
+ char *name;
+ unsigned int res_num;
+ struct resource *res;
+- struct pci_bus *bus;
++ struct list_head *resources;
+ int busnum;
+ };
+
+@@ -261,23 +261,20 @@ static void add_resources(struct pci_roo
+ "ignoring host bridge window %pR (conflicts with %s %pR)\n",
+ res, conflict->name, conflict);
+ else
+- pci_bus_add_resource(info->bus, res, 0);
++ pci_add_resource(info->resources, res);
+ }
+ }
+
+ static void
+ get_current_resources(struct acpi_device *device, int busnum,
+- int domain, struct pci_bus *bus)
++ int domain, struct list_head *resources)
+ {
+ struct pci_root_info info;
+ size_t size;
+
+- if (pci_use_crs)
+- pci_bus_remove_resources(bus);
+-
+ info.bridge = device;
+- info.bus = bus;
+ info.res_num = 0;
++ info.resources = resources;
+ acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource,
+ &info);
+ if (!info.res_num)
+@@ -286,7 +283,7 @@ get_current_resources(struct acpi_device
+ size = sizeof(*info.res) * info.res_num;
+ info.res = kmalloc(size, GFP_KERNEL);
+ if (!info.res)
+- goto res_alloc_fail;
++ return;
+
+ info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum);
+ if (!info.name)
+@@ -301,8 +298,6 @@ get_current_resources(struct acpi_device
+
+ name_alloc_fail:
+ kfree(info.res);
+-res_alloc_fail:
+- return;
+ }
+
+ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
+@@ -310,6 +305,7 @@ struct pci_bus * __devinit pci_acpi_scan
+ struct acpi_device *device = root->device;
+ int domain = root->segment;
+ int busnum = root->secondary.start;
++ LIST_HEAD(resources);
+ struct pci_bus *bus;
+ struct pci_sysdata *sd;
+ int node;
+@@ -364,11 +360,15 @@ struct pci_bus * __devinit pci_acpi_scan
+ memcpy(bus->sysdata, sd, sizeof(*sd));
+ kfree(sd);
+ } else {
+- bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+- if (bus) {
+- get_current_resources(device, busnum, domain, bus);
++ get_current_resources(device, busnum, domain, &resources);
++ if (list_empty(&resources))
++ x86_pci_root_bus_resources(busnum, &resources);
++ bus = pci_create_root_bus(NULL, busnum, &pci_root_ops, sd,
++ &resources);
++ if (bus)
+ bus->subordinate = pci_scan_child_bus(bus);
+- }
++ else
++ pci_free_resource_list(&resources);
+ }
+
+ /* After the PCI-E bus has been walked and all devices discovered,
+--- a/arch/x86/pci/broadcom_bus.c
++++ b/arch/x86/pci/broadcom_bus.c
+@@ -15,10 +15,11 @@
+ #include <linux/pci.h>
+ #include <linux/init.h>
+ #include <asm/pci_x86.h>
++#include <asm/pci-direct.h>
+
+ #include "bus_numa.h"
+
+-static void __devinit cnb20le_res(struct pci_dev *dev)
++static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
+ {
+ struct pci_root_info *info;
+ struct resource res;
+@@ -26,21 +27,12 @@ static void __devinit cnb20le_res(struct
+ u8 fbus, lbus;
+ int i;
+
+-#ifdef CONFIG_ACPI
+- /*
+- * We should get host bridge information from ACPI unless the BIOS
+- * doesn't support it.
+- */
+- if (acpi_os_get_root_pointer())
+- return;
+-#endif
+-
+ info = &pci_root_info[pci_root_num];
+ pci_root_num++;
+
+ /* read the PCI bus numbers */
+- pci_read_config_byte(dev, 0x44, &fbus);
+- pci_read_config_byte(dev, 0x45, &lbus);
++ fbus = read_pci_config_byte(bus, slot, func, 0x44);
++ lbus = read_pci_config_byte(bus, slot, func, 0x45);
+ info->bus_min = fbus;
+ info->bus_max = lbus;
+
+@@ -59,8 +51,8 @@ static void __devinit cnb20le_res(struct
+ }
+
+ /* read the non-prefetchable memory window */
+- pci_read_config_word(dev, 0xc0, &word1);
+- pci_read_config_word(dev, 0xc2, &word2);
++ word1 = read_pci_config_16(bus, slot, func, 0xc0);
++ word2 = read_pci_config_16(bus, slot, func, 0xc2);
+ if (word1 != word2) {
+ res.start = (word1 << 16) | 0x0000;
+ res.end = (word2 << 16) | 0xffff;
+@@ -69,8 +61,8 @@ static void __devinit cnb20le_res(struct
+ }
+
+ /* read the prefetchable memory window */
+- pci_read_config_word(dev, 0xc4, &word1);
+- pci_read_config_word(dev, 0xc6, &word2);
++ word1 = read_pci_config_16(bus, slot, func, 0xc4);
++ word2 = read_pci_config_16(bus, slot, func, 0xc6);
+ if (word1 != word2) {
+ res.start = (word1 << 16) | 0x0000;
+ res.end = (word2 << 16) | 0xffff;
+@@ -79,8 +71,8 @@ static void __devinit cnb20le_res(struct
+ }
+
+ /* read the IO port window */
+- pci_read_config_word(dev, 0xd0, &word1);
+- pci_read_config_word(dev, 0xd2, &word2);
++ word1 = read_pci_config_16(bus, slot, func, 0xd0);
++ word2 = read_pci_config_16(bus, slot, func, 0xd2);
+ if (word1 != word2) {
+ res.start = word1;
+ res.end = word2;
+@@ -92,13 +84,37 @@ static void __devinit cnb20le_res(struct
+ res.start = fbus;
+ res.end = lbus;
+ res.flags = IORESOURCE_BUS;
+- dev_info(&dev->dev, "CNB20LE PCI Host Bridge (domain %04x %pR)\n",
+- pci_domain_nr(dev->bus), &res);
++ printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res);
+
+ for (i = 0; i < info->res_num; i++)
+- dev_info(&dev->dev, "host bridge window %pR\n", &info->res[i]);
++ printk(KERN_INFO "host bridge window %pR\n", &info->res[i]);
+ }
+
+-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
+- cnb20le_res);
++static int __init broadcom_postcore_init(void)
++{
++ u8 bus = 0, slot = 0;
++ u32 id;
++ u16 vendor, device;
++
++#ifdef CONFIG_ACPI
++ /*
++ * We should get host bridge information from ACPI unless the BIOS
++ * doesn't support it.
++ */
++ if (acpi_os_get_root_pointer())
++ return 0;
++#endif
++
++ id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
++ vendor = id & 0xffff;
++ device = (id >> 16) & 0xffff;
++
++ if (vendor == PCI_VENDOR_ID_SERVERWORKS &&
++ device == PCI_DEVICE_ID_SERVERWORKS_LE) {
++ cnb20le_res(bus, slot, 0);
++ cnb20le_res(bus, slot, 1);
++ }
++ return 0;
++}
+
++postcore_initcall(broadcom_postcore_init);
+--- a/arch/x86/pci/bus_numa.c
++++ b/arch/x86/pci/bus_numa.c
+@@ -7,45 +7,50 @@
+ int pci_root_num;
+ struct pci_root_info pci_root_info[PCI_ROOT_NR];
+
+-void x86_pci_root_bus_res_quirks(struct pci_bus *b)
++void x86_pci_root_bus_resources(int bus, struct list_head *resources)
+ {
+ int i;
+ int j;
+ struct pci_root_info *info;
+
+- /* don't go for it if _CRS is used already */
+- if (b->resource[0] != &ioport_resource ||
+- b->resource[1] != &iomem_resource)
+- return;
+-
+ if (!pci_root_num)
+- return;
++ goto default_resources;
+
+ for (i = 0; i < pci_root_num; i++) {
+- if (pci_root_info[i].bus_min == b->number)
++ if (pci_root_info[i].bus_min == bus)
+ break;
+ }
+
+ if (i == pci_root_num)
+- return;
++ goto default_resources;
+
+- printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+- b->number);
++ printk(KERN_DEBUG "PCI: root bus %02x: hardware-probed resources\n",
++ bus);
+
+- pci_bus_remove_resources(b);
+ info = &pci_root_info[i];
+ for (j = 0; j < info->res_num; j++) {
+ struct resource *res;
+ struct resource *root;
+
+ res = &info->res[j];
+- pci_bus_add_resource(b, res, 0);
++ pci_add_resource(resources, res);
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ else
+ root = &iomem_resource;
+ insert_resource(root, res);
+ }
++ return;
++
++default_resources:
++ /*
++ * We don't have any host bridge aperture information from the
++ * "native host bridge drivers," e.g., amd_bus or broadcom_bus,
++ * so fall back to the defaults historically used by pci_create_bus().
++ */
++ printk(KERN_DEBUG "PCI: root bus %02x: using default resources\n", bus);
++ pci_add_resource(resources, &ioport_resource);
++ pci_add_resource(resources, &iomem_resource);
+ }
+
+ void __devinit update_res(struct pci_root_info *info, resource_size_t start,
+--- a/arch/x86/pci/common.c
++++ b/arch/x86/pci/common.c
+@@ -164,9 +164,6 @@ void __devinit pcibios_fixup_bus(struct
+ {
+ struct pci_dev *dev;
+
+- /* root bus? */
+- if (!b->parent)
+- x86_pci_root_bus_res_quirks(b);
+ pci_read_bridge_bases(b);
+ list_for_each_entry(dev, &b->devices, bus_list)
+ pcibios_fixup_device_resources(dev);
+@@ -433,6 +430,7 @@ void __init dmi_check_pciprobe(void)
+
+ struct pci_bus * __devinit pcibios_scan_root(int busnum)
+ {
++ LIST_HEAD(resources);
+ struct pci_bus *bus = NULL;
+ struct pci_sysdata *sd;
+
+@@ -456,9 +454,12 @@ struct pci_bus * __devinit pcibios_scan_
+ sd->node = get_mp_bus_to_node(busnum);
+
+ printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
+- bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+- if (!bus)
++ x86_pci_root_bus_resources(busnum, &resources);
++ bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
++ if (!bus) {
++ pci_free_resource_list(&resources);
+ kfree(sd);
++ }
+
+ return bus;
+ }
+@@ -639,6 +640,7 @@ int pci_ext_cfg_avail(struct pci_dev *de
+
+ struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
+ {
++ LIST_HEAD(resources);
+ struct pci_bus *bus = NULL;
+ struct pci_sysdata *sd;
+
+@@ -653,9 +655,12 @@ struct pci_bus * __devinit pci_scan_bus_
+ return NULL;
+ }
+ sd->node = node;
+- bus = pci_scan_bus(busno, ops, sd);
+- if (!bus)
++ x86_pci_root_bus_resources(busno, &resources);
++ bus = pci_scan_root_bus(NULL, busno, ops, sd, &resources);
++ if (!bus) {
++ pci_free_resource_list(&resources);
+ kfree(sd);
++ }
+
+ return bus;
+ }
+--- a/arch/x86/pci/legacy.c
++++ b/arch/x86/pci/legacy.c
+@@ -31,9 +31,6 @@ int __init pci_legacy_init(void)
+
+ printk("PCI: Probing PCI hardware\n");
+ pci_root_bus = pcibios_scan_root(0);
+- if (pci_root_bus)
+- pci_bus_add_devices(pci_root_bus);
+-
+ return 0;
+ }
+
+--- a/arch/x86/pci/numaq_32.c
++++ b/arch/x86/pci/numaq_32.c
+@@ -153,8 +153,6 @@ int __init pci_numaq_init(void)
+ raw_pci_ops = &pci_direct_conf1_mq;
+
+ pci_root_bus = pcibios_scan_root(0);
+- if (pci_root_bus)
+- pci_bus_add_devices(pci_root_bus);
+ if (num_online_nodes() > 1)
+ for_each_online_node(quad) {
+ if (quad == 0)
+--- a/arch/xtensa/kernel/pci.c
++++ b/arch/xtensa/kernel/pci.c
+@@ -134,9 +134,46 @@ struct pci_controller * __init pcibios_a
+ return pci_ctrl;
+ }
+
++static void __init pci_controller_apertures(struct pci_controller *pci_ctrl,
++ struct list_head *resources)
++{
++ struct resource *res;
++ unsigned long io_offset;
++ int i;
++
++ io_offset = (unsigned long)pci_ctrl->io_space.base;
++ res = &pci_ctrl->io_resource;
++ if (!res->flags) {
++ if (io_offset)
++ printk (KERN_ERR "I/O resource not set for host"
++ " bridge %d\n", pci_ctrl->index);
++ res->start = 0;
++ res->end = IO_SPACE_LIMIT;
++ res->flags = IORESOURCE_IO;
++ }
++ res->start += io_offset;
++ res->end += io_offset;
++ pci_add_resource(resources, res);
++
++ for (i = 0; i < 3; i++) {
++ res = &pci_ctrl->mem_resources[i];
++ if (!res->flags) {
++ if (i > 0)
++ continue;
++ printk(KERN_ERR "Memory resource not set for "
++ "host bridge %d\n", pci_ctrl->index);
++ res->start = 0;
++ res->end = ~0U;
++ res->flags = IORESOURCE_MEM;
++ }
++ pci_add_resource(resources, res);
++ }
++}
++
+ static int __init pcibios_init(void)
+ {
+ struct pci_controller *pci_ctrl;
++ struct list_head resources;
+ struct pci_bus *bus;
+ int next_busno = 0, i;
+
+@@ -145,19 +182,10 @@ static int __init pcibios_init(void)
+ /* Scan all of the recorded PCI controllers. */
+ for (pci_ctrl = pci_ctrl_head; pci_ctrl; pci_ctrl = pci_ctrl->next) {
+ pci_ctrl->last_busno = 0xff;
+- bus = pci_scan_bus(pci_ctrl->first_busno, pci_ctrl->ops,
+- pci_ctrl);
+- if (pci_ctrl->io_resource.flags) {
+- unsigned long offs;
+-
+- offs = (unsigned long)pci_ctrl->io_space.base;
+- pci_ctrl->io_resource.start += offs;
+- pci_ctrl->io_resource.end += offs;
+- bus->resource[0] = &pci_ctrl->io_resource;
+- }
+- for (i = 0; i < 3; ++i)
+- if (pci_ctrl->mem_resources[i].flags)
+- bus->resource[i+1] =&pci_ctrl->mem_resources[i];
++ INIT_LIST_HEAD(&resources);
++ pci_controller_apertures(pci_ctrl, &resources);
++ bus = pci_scan_root_bus(NULL, pci_ctrl->first_busno,
++ pci_ctrl->ops, pci_ctrl, &resources);
+ pci_ctrl->bus = bus;
+ pci_ctrl->last_busno = bus->subordinate;
+ if (next_busno <= pci_ctrl->last_busno)
+@@ -178,36 +206,7 @@ void __init pcibios_fixup_bus(struct pci
+ int i;
+
+ io_offset = (unsigned long)pci_ctrl->io_space.base;
+- if (bus->parent == NULL) {
+- /* this is a host bridge - fill in its resources */
+- pci_ctrl->bus = bus;
+-
+- bus->resource[0] = res = &pci_ctrl->io_resource;
+- if (!res->flags) {
+- if (io_offset)
+- printk (KERN_ERR "I/O resource not set for host"
+- " bridge %d\n", pci_ctrl->index);
+- res->start = 0;
+- res->end = IO_SPACE_LIMIT;
+- res->flags = IORESOURCE_IO;
+- }
+- res->start += io_offset;
+- res->end += io_offset;
+-
+- for (i = 0; i < 3; i++) {
+- res = &pci_ctrl->mem_resources[i];
+- if (!res->flags) {
+- if (i > 0)
+- continue;
+- printk(KERN_ERR "Memory resource not set for "
+- "host bridge %d\n", pci_ctrl->index);
+- res->start = 0;
+- res->end = ~0U;
+- res->flags = IORESOURCE_MEM;
+- }
+- bus->resource[i+1] = res;
+- }
+- } else {
++ if (bus->parent) {
+ /* This is a subordinate bridge */
+ pci_read_bridge_bases(bus);
+
+--- a/drivers/parisc/dino.c
++++ b/drivers/parisc/dino.c
+@@ -562,19 +562,6 @@ dino_fixup_bus(struct pci_bus *bus)
+ /* Firmware doesn't set up card-mode dino, so we have to */
+ if (is_card_dino(&dino_dev->hba.dev->id)) {
+ dino_card_setup(bus, dino_dev->hba.base_addr);
+- } else if(bus->parent == NULL) {
+- /* must have a dino above it, reparent the resources
+- * into the dino window */
+- int i;
+- struct resource *res = &dino_dev->hba.lmmio_space;
+-
+- bus->resource[0] = &(dino_dev->hba.io_space);
+- for(i = 0; i < DINO_MAX_LMMIO_RESOURCES; i++) {
+- if(res[i].flags == 0)
+- break;
+- bus->resource[i+1] = &res[i];
+- }
+-
+ } else if (bus->parent) {
+ int i;
+
+@@ -927,6 +914,7 @@ static int __init dino_probe(struct pari
+ const char *version = "unknown";
+ char *name;
+ int is_cujo = 0;
++ LIST_HEAD(resources);
+ struct pci_bus *bus;
+ unsigned long hpa = dev->hpa.start;
+
+@@ -1003,26 +991,37 @@ static int __init dino_probe(struct pari
+
+ dev->dev.platform_data = dino_dev;
+
++ pci_add_resource(&resources, &dino_dev->hba.io_space);
++ if (dino_dev->hba.lmmio_space.flags)
++ pci_add_resource(&resources, &dino_dev->hba.lmmio_space);
++ if (dino_dev->hba.elmmio_space.flags)
++ pci_add_resource(&resources, &dino_dev->hba.elmmio_space);
++ if (dino_dev->hba.gmmio_space.flags)
++ pci_add_resource(&resources, &dino_dev->hba.gmmio_space);
++
+ /*
+ ** It's not used to avoid chicken/egg problems
+ ** with configuration accessor functions.
+ */
+- dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev,
+- dino_current_bus, &dino_cfg_ops, NULL);
+-
+- if(bus) {
+- /* This code *depends* on scanning being single threaded
+- * if it isn't, this global bus number count will fail
+- */
+- dino_current_bus = bus->subordinate + 1;
+- pci_bus_assign_resources(bus);
+- pci_bus_add_devices(bus);
+- } else {
++ dino_dev->hba.hba_bus = bus = pci_create_root_bus(&dev->dev,
++ dino_current_bus, &dino_cfg_ops, NULL, &resources);
++ if (!bus) {
+ printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
+ dev_name(&dev->dev), dino_current_bus);
++ pci_free_resource_list(&resources);
+ /* increment the bus number in case of duplicates */
+ dino_current_bus++;
++ return 0;
+ }
++
++ bus->subordinate = pci_scan_child_bus(bus);
++
++ /* This code *depends* on scanning being single threaded
++ * if it isn't, this global bus number count will fail
++ */
++ dino_current_bus = bus->subordinate + 1;
++ pci_bus_assign_resources(bus);
++ pci_bus_add_devices(bus);
+ return 0;
+ }
+
+--- a/drivers/parisc/lba_pci.c
++++ b/drivers/parisc/lba_pci.c
+@@ -653,7 +653,7 @@ lba_fixup_bus(struct pci_bus *bus)
+ }
+ } else {
+ /* Host-PCI Bridge */
+- int err, i;
++ int err;
+
+ DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n",
+ ldev->hba.io_space.name,
+@@ -669,9 +669,6 @@ lba_fixup_bus(struct pci_bus *bus)
+ lba_dump_res(&ioport_resource, 2);
+ BUG();
+ }
+- /* advertize Host bridge resources to PCI bus */
+- bus->resource[0] = &(ldev->hba.io_space);
+- i = 1;
+
+ if (ldev->hba.elmmio_space.start) {
+ err = request_resource(&iomem_resource,
+@@ -685,35 +682,17 @@ lba_fixup_bus(struct pci_bus *bus)
+
+ /* lba_dump_res(&iomem_resource, 2); */
+ /* BUG(); */
+- } else
+- bus->resource[i++] = &(ldev->hba.elmmio_space);
++ }
+ }
+
+-
+- /* Overlaps with elmmio can (and should) fail here.
+- * We will prune (or ignore) the distributed range.
+- *
+- * FIXME: SBA code should register all elmmio ranges first.
+- * that would take care of elmmio ranges routed
+- * to a different rope (already discovered) from
+- * getting registered *after* LBA code has already
+- * registered it's distributed lmmio range.
+- */
+- if (truncate_pat_collision(&iomem_resource,
+- &(ldev->hba.lmmio_space))) {
+-
+- printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n",
+- (long)ldev->hba.lmmio_space.start,
+- (long)ldev->hba.lmmio_space.end);
+- } else {
++ if (ldev->hba.lmmio_space.flags) {
+ err = request_resource(&iomem_resource, &(ldev->hba.lmmio_space));
+ if (err < 0) {
+ printk(KERN_ERR "FAILED: lba_fixup_bus() request for "
+ "lmmio_space [%lx/%lx]\n",
+ (long)ldev->hba.lmmio_space.start,
+ (long)ldev->hba.lmmio_space.end);
+- } else
+- bus->resource[i++] = &(ldev->hba.lmmio_space);
++ }
+ }
+
+ #ifdef CONFIG_64BIT
+@@ -728,7 +707,6 @@ lba_fixup_bus(struct pci_bus *bus)
+ lba_dump_res(&iomem_resource, 2);
+ BUG();
+ }
+- bus->resource[i++] = &(ldev->hba.gmmio_space);
+ }
+ #endif
+
+@@ -1404,6 +1382,7 @@ static int __init
+ lba_driver_probe(struct parisc_device *dev)
+ {
+ struct lba_device *lba_dev;
++ LIST_HEAD(resources);
+ struct pci_bus *lba_bus;
+ struct pci_ops *cfg_ops;
+ u32 func_class;
+@@ -1518,10 +1497,41 @@ lba_driver_probe(struct parisc_device *d
+ if (lba_dev->hba.bus_num.start < lba_next_bus)
+ lba_dev->hba.bus_num.start = lba_next_bus;
+
++ /* Overlaps with elmmio can (and should) fail here.
++ * We will prune (or ignore) the distributed range.
++ *
++ * FIXME: SBA code should register all elmmio ranges first.
++ * that would take care of elmmio ranges routed
++ * to a different rope (already discovered) from
++ * getting registered *after* LBA code has already
++ * registered it's distributed lmmio range.
++ */
++ if (truncate_pat_collision(&iomem_resource,
++ &(lba_dev->hba.lmmio_space))) {
++ printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n",
++ (long)lba_dev->hba.lmmio_space.start,
++ (long)lba_dev->hba.lmmio_space.end);
++ lba_dev->hba.lmmio_space.flags = 0;
++ }
++
++ pci_add_resource(&resources, &lba_dev->hba.io_space);
++ if (lba_dev->hba.elmmio_space.start)
++ pci_add_resource(&resources, &lba_dev->hba.elmmio_space);
++ if (lba_dev->hba.lmmio_space.flags)
++ pci_add_resource(&resources, &lba_dev->hba.lmmio_space);
++ if (lba_dev->hba.gmmio_space.flags)
++ pci_add_resource(&resources, &lba_dev->hba.gmmio_space);
++
+ dev->dev.platform_data = lba_dev;
+ lba_bus = lba_dev->hba.hba_bus =
+- pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
+- cfg_ops, NULL);
++ pci_create_root_bus(&dev->dev, lba_dev->hba.bus_num.start,
++ cfg_ops, NULL, &resources);
++ if (!lba_bus) {
++ pci_free_resource_list(&resources);
++ return 0;
++ }
++
++ lba_bus->subordinate = pci_scan_child_bus(lba_bus);
+
+ /* This is in lieu of calling pci_assign_unassigned_resources() */
+ if (is_pdc_pat()) {
+@@ -1551,10 +1561,8 @@ lba_driver_probe(struct parisc_device *d
+ lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
+ }
+
+- if (lba_bus) {
+- lba_next_bus = lba_bus->subordinate + 1;
+- pci_bus_add_devices(lba_bus);
+- }
++ lba_next_bus = lba_bus->subordinate + 1;
++ pci_bus_add_devices(lba_bus);
+
+ /* Whew! Finally done! Tell services we got this one covered. */
+ return 0;
+--- a/drivers/pci/bus.c
++++ b/drivers/pci/bus.c
+@@ -18,6 +18,32 @@
+
+ #include "pci.h"
+
++void pci_add_resource(struct list_head *resources, struct resource *res)
++{
++ struct pci_bus_resource *bus_res;
++
++ bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL);
++ if (!bus_res) {
++ printk(KERN_ERR "PCI: can't add bus resource %pR\n", res);
++ return;
++ }
++
++ bus_res->res = res;
++ list_add_tail(&bus_res->list, resources);
++}
++EXPORT_SYMBOL(pci_add_resource);
++
++void pci_free_resource_list(struct list_head *resources)
++{
++ struct pci_bus_resource *bus_res, *tmp;
++
++ list_for_each_entry_safe(bus_res, tmp, resources, list) {
++ list_del(&bus_res->list);
++ kfree(bus_res);
++ }
++}
++EXPORT_SYMBOL(pci_free_resource_list);
++
+ void pci_bus_add_resource(struct pci_bus *bus, struct resource *res,
+ unsigned int flags)
+ {
+@@ -52,16 +78,12 @@ EXPORT_SYMBOL_GPL(pci_bus_resource_n);
+
+ void pci_bus_remove_resources(struct pci_bus *bus)
+ {
+- struct pci_bus_resource *bus_res, *tmp;
+ int i;
+
+ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+ bus->resource[i] = NULL;
+
+- list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) {
+- list_del(&bus_res->list);
+- kfree(bus_res);
+- }
++ pci_free_resource_list(&bus->resources);
+ }
+
+ /**
+--- a/drivers/pci/probe.c
++++ b/drivers/pci/probe.c
+@@ -1522,12 +1522,14 @@ unsigned int __devinit pci_scan_child_bu
+ return max;
+ }
+
+-struct pci_bus * pci_create_bus(struct device *parent,
+- int bus, struct pci_ops *ops, void *sysdata)
++struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
++ struct pci_ops *ops, void *sysdata, struct list_head *resources)
+ {
+- int error;
++ int error, i;
+ struct pci_bus *b, *b2;
+ struct device *dev;
++ struct pci_bus_resource *bus_res, *n;
++ struct resource *res;
+
+ b = pci_alloc_bus();
+ if (!b)
+@@ -1577,8 +1579,20 @@ struct pci_bus * pci_create_bus(struct d
+ pci_create_legacy_files(b);
+
+ b->number = b->secondary = bus;
+- b->resource[0] = &ioport_resource;
+- b->resource[1] = &iomem_resource;
++
++ /* Add initial resources to the bus */
++ list_for_each_entry_safe(bus_res, n, resources, list)
++ list_move_tail(&bus_res->list, &b->resources);
++
++ if (parent)
++ dev_info(parent, "PCI host bridge to bus %s\n", dev_name(&b->dev));
++ else
++ printk(KERN_INFO "PCI host bridge to bus %s\n", dev_name(&b->dev));
++
++ pci_bus_for_each_resource(b, res, i) {
++ if (res)
++ dev_info(&b->dev, "root bus resource %pR\n", res);
++ }
+
+ return b;
+
+@@ -1594,18 +1608,58 @@ err_out:
+ return NULL;
+ }
+
++struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus,
++ struct pci_ops *ops, void *sysdata, struct list_head *resources)
++{
++ struct pci_bus *b;
++
++ b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
++ if (!b)
++ return NULL;
++
++ b->subordinate = pci_scan_child_bus(b);
++ pci_bus_add_devices(b);
++ return b;
++}
++EXPORT_SYMBOL(pci_scan_root_bus);
++
++/* Deprecated; use pci_scan_root_bus() instead */
+ struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
+ int bus, struct pci_ops *ops, void *sysdata)
+ {
++ LIST_HEAD(resources);
+ struct pci_bus *b;
+
+- b = pci_create_bus(parent, bus, ops, sysdata);
++ pci_add_resource(&resources, &ioport_resource);
++ pci_add_resource(&resources, &iomem_resource);
++ b = pci_create_root_bus(parent, bus, ops, sysdata, &resources);
+ if (b)
+ b->subordinate = pci_scan_child_bus(b);
++ else
++ pci_free_resource_list(&resources);
+ return b;
+ }
+ EXPORT_SYMBOL(pci_scan_bus_parented);
+
++struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops,
++ void *sysdata)
++{
++ LIST_HEAD(resources);
++ struct pci_bus *b;
++
++ pci_add_resource(&resources, &ioport_resource);
++ pci_add_resource(&resources, &iomem_resource);
++ b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources);
++ if (b) {
++ b->subordinate = pci_scan_child_bus(b);
++ pci_bus_add_devices(b);
++ } else {
++ pci_free_resource_list(&resources);
++ }
++ return b;
++}
++EXPORT_SYMBOL(pci_scan_bus);
++
+ #ifdef CONFIG_HOTPLUG
+ /**
+ * pci_rescan_bus - scan a PCI bus for devices.
+--- a/include/linux/pci.h
++++ b/include/linux/pci.h
+@@ -660,17 +660,13 @@ extern struct pci_bus *pci_find_bus(int
+ void pci_bus_add_devices(const struct pci_bus *bus);
+ struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
+ struct pci_ops *ops, void *sysdata);
+-static inline struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops,
+- void *sysdata)
+-{
+- struct pci_bus *root_bus;
+- root_bus = pci_scan_bus_parented(NULL, bus, ops, sysdata);
+- if (root_bus)
+- pci_bus_add_devices(root_bus);
+- return root_bus;
+-}
+-struct pci_bus *pci_create_bus(struct device *parent, int bus,
+- struct pci_ops *ops, void *sysdata);
++struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
++struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
++ struct pci_ops *ops, void *sysdata,
++ struct list_head *resources);
++struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus,
++ struct pci_ops *ops, void *sysdata,
++ struct list_head *resources);
+ struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
+ int busnr);
+ void pcie_update_link_speed(struct pci_bus *bus, u16 link_status);
+@@ -910,6 +906,8 @@ int pci_request_selected_regions_exclusi
+ void pci_release_selected_regions(struct pci_dev *, int);
+
+ /* drivers/pci/bus.c */
++void pci_add_resource(struct list_head *resources, struct resource *res);
++void pci_free_resource_list(struct list_head *resources);
+ void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
+ struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
+ void pci_bus_remove_resources(struct pci_bus *bus);
diff --git a/target/linux/brcm47xx/patches-3.2/0036-bcma-add-the-core-unit-number.patch b/target/linux/brcm47xx/patches-3.2/0036-bcma-add-the-core-unit-number.patch
new file mode 100644
index 0000000..2c41a30
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0036-bcma-add-the-core-unit-number.patch
@@ -0,0 +1,61 @@
+From 7b9116eeaf44c0d368b5eeaa06eb101465284596 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 11 Jan 2012 15:26:11 +0100
+Subject: [PATCH 23/31] bcma: add the core unit number
+
+Some SoCs have two pcie or gmac cores and we need to know the number of
+the specific core on the bus. This is the case for the BCM4706.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c | 14 ++++++++++++++
+ include/linux/bcma/bcma.h | 1 +
+ 2 files changed, 15 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor
+ return NULL;
+ }
+
++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry_reverse(core, &bus->cores, list) {
++ if (core->id.id == coreid)
++ return core;
++ }
++ return NULL;
++}
++
+ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
+ struct bcma_device_id *match, int core_num,
+ struct bcma_device *core)
+@@ -407,6 +418,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ bcma_scan_switch_core(bus, erombase);
+
+ while (eromptr < eromend) {
++ struct bcma_device *other_core;
+ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+@@ -426,6 +438,8 @@ int bcma_bus_scan(struct bcma_bus *bus)
+
+ core->core_index = core_num++;
+ bus->nr_cores++;
++ other_core = bcma_find_core_reverse(bus, core->id.id);
++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
+
+ pr_info("Core %d found: %s "
+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -136,6 +136,7 @@ struct bcma_device {
+ bool dev_registered;
+
+ u8 core_index;
++ u8 core_unit;
+
+ u32 addr;
+ u32 addr1;
diff --git a/target/linux/brcm47xx/patches-3.2/0037-bcma-constants-for-PCI-and-use-them.patch b/target/linux/brcm47xx/patches-3.2/0037-bcma-constants-for-PCI-and-use-them.patch
new file mode 100644
index 0000000..ab5f481
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0037-bcma-constants-for-PCI-and-use-them.patch
@@ -0,0 +1,334 @@
+From 300efafa8e1381a208c723bb9d03d46bf29f1ec0 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 14 Jan 2012 20:02:15 +0100
+Subject: [PATCH 24/31] bcma: constants for PCI and use them
+
+There are loots of magic numbers used in the PCIe code. These constants
+are from the Broadcom SDK and will also used in the host controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/driver_pci.c | 124 +++++++++++++++++++---------------
+ include/linux/bcma/bcma_driver_pci.h | 85 +++++++++++++++++++++++
+ 2 files changed, 155 insertions(+), 54 deletions(-)
+
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -4,6 +4,7 @@
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -18,38 +19,39 @@
+
+ static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
+ {
+- pcicore_write32(pc, 0x130, address);
+- pcicore_read32(pc, 0x130);
+- return pcicore_read32(pc, 0x134);
++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address);
++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA);
+ }
+
+ #if 0
+ static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
+ {
+- pcicore_write32(pc, 0x130, address);
+- pcicore_read32(pc, 0x130);
+- pcicore_write32(pc, 0x134, data);
++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address);
++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data);
+ }
+ #endif
+
+ static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
+ {
+- const u16 mdio_control = 0x128;
+- const u16 mdio_data = 0x12C;
+ u32 v;
+ int i;
+
+- v = (1 << 30); /* Start of Transaction */
+- v |= (1 << 28); /* Write Transaction */
+- v |= (1 << 17); /* Turnaround */
+- v |= (0x1F << 18);
++ v = BCMA_CORE_PCI_MDIODATA_START;
++ v |= BCMA_CORE_PCI_MDIODATA_WRITE;
++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
++ v |= BCMA_CORE_PCI_MDIODATA_TA;
+ v |= (phy << 4);
+- pcicore_write32(pc, mdio_data, v);
++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
+
+ udelay(10);
+ for (i = 0; i < 200; i++) {
+- v = pcicore_read32(pc, mdio_control);
+- if (v & 0x100 /* Trans complete */)
++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
+ break;
+ msleep(1);
+ }
+@@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc
+
+ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
+ {
+- const u16 mdio_control = 0x128;
+- const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u16 ret = 0;
+ u32 v;
+ int i;
+
+- v = 0x80; /* Enable Preamble Sequence */
+- v |= 0x2; /* MDIO Clock Divisor */
+- pcicore_write32(pc, mdio_control, v);
++ /* enable mdio access to SERDES */
++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN;
++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL;
++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v);
+
+ if (pc->core->id.rev >= 10) {
+ max_retries = 200;
+ bcma_pcie_mdio_set_phy(pc, device);
++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
++ } else {
++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD);
++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
+ }
+
+- v = (1 << 30); /* Start of Transaction */
+- v |= (1 << 29); /* Read Transaction */
+- v |= (1 << 17); /* Turnaround */
+- if (pc->core->id.rev < 10)
+- v |= (u32)device << 22;
+- v |= (u32)address << 18;
+- pcicore_write32(pc, mdio_data, v);
++ v = BCMA_CORE_PCI_MDIODATA_START;
++ v |= BCMA_CORE_PCI_MDIODATA_READ;
++ v |= BCMA_CORE_PCI_MDIODATA_TA;
++
++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < max_retries; i++) {
+- v = pcicore_read32(pc, mdio_control);
+- if (v & 0x100 /* Trans complete */) {
++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) {
+ udelay(10);
+- ret = pcicore_read32(pc, mdio_data);
++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA);
+ break;
+ }
+ msleep(1);
+ }
+- pcicore_write32(pc, mdio_control, 0);
++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
+ return ret;
+ }
+
+ static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
+ u8 address, u16 data)
+ {
+- const u16 mdio_control = 0x128;
+- const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u32 v;
+ int i;
+
+- v = 0x80; /* Enable Preamble Sequence */
+- v |= 0x2; /* MDIO Clock Divisor */
+- pcicore_write32(pc, mdio_control, v);
++ /* enable mdio access to SERDES */
++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN;
++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL;
++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v);
+
+ if (pc->core->id.rev >= 10) {
+ max_retries = 200;
+ bcma_pcie_mdio_set_phy(pc, device);
++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
++ } else {
++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD);
++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
+ }
+
+- v = (1 << 30); /* Start of Transaction */
+- v |= (1 << 28); /* Write Transaction */
+- v |= (1 << 17); /* Turnaround */
+- if (pc->core->id.rev < 10)
+- v |= (u32)device << 22;
+- v |= (u32)address << 18;
++ v = BCMA_CORE_PCI_MDIODATA_START;
++ v |= BCMA_CORE_PCI_MDIODATA_WRITE;
++ v |= BCMA_CORE_PCI_MDIODATA_TA;
+ v |= data;
+- pcicore_write32(pc, mdio_data, v);
++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < max_retries; i++) {
+- v = pcicore_read32(pc, mdio_control);
+- if (v & 0x100 /* Trans complete */)
++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
+ break;
+ msleep(1);
+ }
+- pcicore_write32(pc, mdio_control, 0);
++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
+ }
+
+ /**************************************************
+@@ -138,20 +145,29 @@ static void bcma_pcie_mdio_write(struct
+
+ static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
+ {
+- return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
++ u32 tmp;
++
++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG);
++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT)
++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE |
++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY;
++ else
++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE;
+ }
+
+ static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
+ {
+- const u8 serdes_pll_device = 0x1D;
+- const u8 serdes_rx_device = 0x1F;
+ u16 tmp;
+
+- bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+- bcma_pcicore_polarity_workaround(pc));
+- tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+- if (tmp & 0x4000)
+- bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX,
++ BCMA_CORE_PCI_SERDES_RX_CTRL,
++ bcma_pcicore_polarity_workaround(pc));
++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL,
++ BCMA_CORE_PCI_SERDES_PLL_CTRL);
++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN)
++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL,
++ BCMA_CORE_PCI_SERDES_PLL_CTRL,
++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN);
+ }
+
+ /**************************************************
+--- a/include/linux/bcma/bcma_driver_pci.h
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -53,6 +53,35 @@ struct pci_dev;
+ #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
+ #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
+ #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */
++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */
++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */
++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */
++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2
++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */
++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */
++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */
++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */
++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */
++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */
++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */
++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */
++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */
++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */
++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */
++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */
++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */
++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */
++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */
++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */
++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */
++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */
++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */
++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */
++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */
+ #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
+ #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
+ #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
+@@ -72,6 +101,62 @@ struct pci_dev;
+ #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
+ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+
++/* PCIE protocol PHY diagnostic registers */
++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */
++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */
++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */
++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */
++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */
++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */
++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */
++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */
++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */
++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */
++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */
++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */
++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */
++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */
++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */
++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */
++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */
++
++/* PCIE protocol DLLP diagnostic registers */
++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */
++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */
++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */
++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16)
++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */
++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */
++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */
++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */
++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */
++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */
++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */
++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */
++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */
++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */
++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */
++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */
++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */
++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */
++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */
++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */
++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */
++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */
++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */
++
++/* SERDES RX registers */
++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */
++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */
++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */
++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */
++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */
++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */
++
++/* SERDES PLL registers */
++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */
++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */
++
+ /* PCIcore specific boardflags */
+ #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
+
diff --git a/target/linux/brcm47xx/patches-3.2/0038-bcma-export-bcma_pcie_read.patch b/target/linux/brcm47xx/patches-3.2/0038-bcma-export-bcma_pcie_read.patch
new file mode 100644
index 0000000..70bb497
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0038-bcma-export-bcma_pcie_read.patch
@@ -0,0 +1,35 @@
+From 01d8709c311858c37e02c96464ea4dc954334210 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 14 Jan 2012 20:03:09 +0100
+Subject: [PATCH 25/31] bcma: export bcma_pcie_read()
+
+This will be needed by the host controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h | 2 ++
+ drivers/bcma/driver_pci.c | 2 +-
+ 2 files changed, 3 insertions(+), 1 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -46,6 +46,8 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+ int bcma_sflash_init(struct bcma_drv_cc *cc);
+ #endif /* CONFIG_BCMA_SFLASH */
+
++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
++
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+ extern int __init bcma_host_pci_init(void);
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -17,7 +17,7 @@
+ * R/W ops.
+ **************************************************/
+
+-static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
+ {
+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address);
+ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
diff --git a/target/linux/brcm47xx/patches-3.2/0039-bcma-make-some-functions-__devinit.patch b/target/linux/brcm47xx/patches-3.2/0039-bcma-make-some-functions-__devinit.patch
new file mode 100644
index 0000000..2534a3a
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0039-bcma-make-some-functions-__devinit.patch
@@ -0,0 +1,111 @@
+From 3cd3138f2ef77e18abc99737c6740f35d61dbbb3 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 15 Jan 2012 23:05:05 +0100
+Subject: [PATCH 26/32] bcma: make some functions __devinit
+
+bcma_core_pci_hostmode_init() has to be in __devinit as it will call a
+function in that section and so all functions calling it also have to
+be in __devinit.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h | 4 ++--
+ drivers/bcma/driver_pci.c | 6 +++---
+ drivers/bcma/driver_pci_host.c | 2 +-
+ drivers/bcma/host_pci.c | 4 ++--
+ drivers/bcma/main.c | 2 +-
+ include/linux/bcma/bcma_driver_pci.h | 2 +-
+ 6 files changed, 10 insertions(+), 10 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -13,7 +13,7 @@
+ struct bcma_bus;
+
+ /* main.c */
+-int bcma_bus_register(struct bcma_bus *bus);
++int __devinit bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+ struct bcma_device *core_cc,
+@@ -55,7 +55,7 @@ extern void __exit bcma_host_pci_exit(vo
+ #endif /* CONFIG_BCMA_HOST_PCI */
+
+ #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
+ #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+
+ #endif
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -174,12 +174,12 @@ static void bcma_pcicore_serdes_workarou
+ * Init.
+ **************************************************/
+
+-static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
+ {
+ bcma_pcicore_serdes_workaround(pc);
+ }
+
+-static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
++static bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
+ {
+ struct bcma_bus *bus = pc->core->bus;
+ u16 chipid_top;
+@@ -204,7 +204,7 @@ static bool bcma_core_pci_is_in_hostmode
+ return true;
+ }
+
+-void bcma_core_pci_init(struct bcma_drv_pci *pc)
++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc)
+ {
+ if (pc->setup_done)
+ return;
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -8,7 +8,7 @@
+ #include "bcma_private.h"
+ #include <linux/bcma/bcma.h>
+
+-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+ {
+ pr_err("No support for PCI core in hostmode yet\n");
+ }
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci
+ .awrite32 = bcma_host_pci_awrite32,
+ };
+
+-static int bcma_host_pci_probe(struct pci_dev *dev,
+- const struct pci_device_id *id)
++static int __devinit bcma_host_pci_probe(struct pci_dev *dev,
++ const struct pci_device_id *id)
+ {
+ struct bcma_bus *bus;
+ int err = -ENOMEM;
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -132,7 +132,7 @@ static void bcma_unregister_cores(struct
+ }
+ }
+
+-int bcma_bus_register(struct bcma_bus *bus)
++int __devinit bcma_bus_register(struct bcma_bus *bus)
+ {
+ int err;
+ struct bcma_device *core;
+--- a/include/linux/bcma/bcma_driver_pci.h
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -169,7 +169,7 @@ struct bcma_drv_pci {
+ #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
+ #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
+
+-extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc);
+ extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
+ struct bcma_device *core, bool enable);
+
diff --git a/target/linux/brcm47xx/patches-3.2/0040-bcma-add-PCIe-host-controller.patch b/target/linux/brcm47xx/patches-3.2/0040-bcma-add-PCIe-host-controller.patch
new file mode 100644
index 0000000..2afd09a
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0040-bcma-add-PCIe-host-controller.patch
@@ -0,0 +1,845 @@
+From 47d0e8c2743729b4248585d33b55b6aaeac008d5 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 8 Jan 2012 16:53:15 +0100
+Subject: [PATCH 25/34] bcma: add PCIe host controller
+
+Some SoCs have a PCIe host controller to make it possible to attach
+some other devices to it, like an other Wifi card.
+This code was tested with an Netgear WNDR3400 (bcm4716 based), but
+should work with all bcma based SoCs.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/pci/pci-bcm47xx.c | 49 +++-
+ drivers/bcma/bcma_private.h | 1 +
+ drivers/bcma/driver_pci.c | 38 +--
+ drivers/bcma/driver_pci_host.c | 576 +++++++++++++++++++++++++++++++++-
+ include/linux/bcma/bcma_driver_pci.h | 34 ++
+ include/linux/bcma/bcma_regs.h | 27 ++
+ 6 files changed, 686 insertions(+), 39 deletions(-)
+
+--- a/arch/mips/pci/pci-bcm47xx.c
++++ b/arch/mips/pci/pci-bcm47xx.c
+@@ -25,6 +25,7 @@
+ #include <linux/types.h>
+ #include <linux/pci.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/bcma/bcma.h>
+ #include <bcm47xx.h>
+
+ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+@@ -32,15 +33,12 @@ int __init pcibios_map_irq(const struct
+ return 0;
+ }
+
+-int pcibios_plat_dev_init(struct pci_dev *dev)
+-{
+ #ifdef CONFIG_BCM47XX_SSB
++static int bcm47xx_pcibios_plat_dev_init_ssb(struct pci_dev *dev)
++{
+ int res;
+ u8 slot, pin;
+
+- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+- return 0;
+-
+ res = ssb_pcibios_plat_dev_init(dev);
+ if (res < 0) {
+ printk(KERN_ALERT "PCI: Failed to init device %s\n",
+@@ -60,6 +58,47 @@ int pcibios_plat_dev_init(struct pci_dev
+ }
+
+ dev->irq = res;
++ return 0;
++}
+ #endif
++
++#ifdef CONFIG_BCM47XX_BCMA
++static int bcm47xx_pcibios_plat_dev_init_bcma(struct pci_dev *dev)
++{
++ int res;
++
++ res = bcma_core_pci_plat_dev_init(dev);
++ if (res < 0) {
++ printk(KERN_ALERT "PCI: Failed to init device %s\n",
++ pci_name(dev));
++ return res;
++ }
++
++ res = bcma_core_pci_pcibios_map_irq(dev);
++
++ /* IRQ-0 and IRQ-1 are software interrupts. */
++ if (res < 2) {
++ printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
++ pci_name(dev));
++ return res;
++ }
++
++ dev->irq = res;
+ return 0;
+ }
++#endif
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++#ifdef CONFIG_BCM47XX_SSB
++ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB)
++ return bcm47xx_pcibios_plat_dev_init_ssb(dev);
++ else
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA)
++ return bcm47xx_pcibios_plat_dev_init_bcma(dev);
++ else
++#endif
++ return 0;
++}
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -55,6 +55,7 @@ extern void __exit bcma_host_pci_exit(vo
+ #endif /* CONFIG_BCMA_HOST_PCI */
+
+ #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc);
+ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
+ #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -2,7 +2,7 @@
+ * Broadcom specific AMBA
+ * PCI Core
+ *
+- * Copyright 2005, Broadcom Corporation
++ * Copyright 2005, 2011, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+@@ -179,47 +179,19 @@ static void __devinit bcma_core_pci_clie
+ bcma_pcicore_serdes_workaround(pc);
+ }
+
+-static bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
+-{
+- struct bcma_bus *bus = pc->core->bus;
+- u16 chipid_top;
+-
+- chipid_top = (bus->chipinfo.id & 0xFF00);
+- if (chipid_top != 0x4700 &&
+- chipid_top != 0x5300)
+- return false;
+-
+-#ifdef CONFIG_SSB_DRIVER_PCICORE
+- if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI)
+- return false;
+-#endif /* CONFIG_SSB_DRIVER_PCICORE */
+-
+-#if 0
+- /* TODO: on BCMA we use address from EROM instead of magic formula */
+- u32 tmp;
+- return !mips_busprobe32(tmp, (bus->mmio +
+- (pc->core->core_index * BCMA_CORE_SIZE)));
+-#endif
+-
+- return true;
+-}
+-
+ void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc)
+ {
+ if (pc->setup_done)
+ return;
+
+- if (bcma_core_pci_is_in_hostmode(pc)) {
+ #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc);
++ if (pc->hostmode)
+ bcma_core_pci_hostmode_init(pc);
+-#else
+- pr_err("Driver compiled without support for hostmode PCI\n");
+ #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+- } else {
+- bcma_core_pci_clientmode_init(pc);
+- }
+
+- pc->setup_done = true;
++ if (!pc->hostmode)
++ bcma_core_pci_clientmode_init(pc);
+ }
+
+ int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -2,13 +2,587 @@
+ * Broadcom specific AMBA
+ * PCI Core in hostmode
+ *
++ * Copyright 2005 - 2011, Broadcom Corporation
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include "bcma_private.h"
++#include <linux/export.h>
+ #include <linux/bcma/bcma.h>
++#include <asm/paccess.h>
++
++/* Probe a 32bit value on the bus and catch bus exceptions.
++ * Returns nonzero on a bus exception.
++ * This is MIPS specific */
++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr)))
++
++/* Assume one-hot slot wiring */
++#define BCMA_PCI_SLOT_MAX 16
++#define PCI_CONFIG_SPACE_SIZE 256
++
++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
++{
++ struct bcma_bus *bus = pc->core->bus;
++ u16 chipid_top;
++ u32 tmp;
++
++ chipid_top = (bus->chipinfo.id & 0xFF00);
++ if (chipid_top != 0x4700 &&
++ chipid_top != 0x5300)
++ return false;
++
++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
++ pr_info("This PCI core is disabled and not working\n");
++ return false;
++ }
++
++ bcma_core_enable(pc->core, 0);
++
++ return !mips_busprobe32(tmp, pc->core->io_addr);
++}
++
++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address)
++{
++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address);
++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR);
++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA);
++}
++
++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address,
++ u32 data)
++{
++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address);
++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR);
++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data);
++}
++
++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev,
++ unsigned int func, unsigned int off)
++{
++ u32 addr = 0;
++
++ /* Issue config commands only when the data link is up (atleast
++ * one external pcie device is present).
++ */
++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG)
++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP))
++ goto out;
++
++ /* Type 0 transaction */
++ /* Slide the PCI window to the appropriate slot */
++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0);
++ /* Calculate the address */
++ addr = pc->host_controller->host_cfg_addr;
++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT);
++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT);
++ addr |= (off & ~3);
++
++out:
++ return addr;
++}
++
++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev,
++ unsigned int func, unsigned int off,
++ void *buf, int len)
++{
++ int err = -EINVAL;
++ u32 addr, val;
++ void __iomem *mmio = 0;
++
++ WARN_ON(!pc->hostmode);
++ if (unlikely(len != 1 && len != 2 && len != 4))
++ goto out;
++ if (dev == 0) {
++ /* we support only two functions on device 0 */
++ if (func > 1)
++ return -EINVAL;
++
++ /* accesses to config registers with offsets >= 256
++ * requires indirect access.
++ */
++ if (off >= PCI_CONFIG_SPACE_SIZE) {
++ addr = (func << 12);
++ addr |= (off & 0x0FFF);
++ val = bcma_pcie_read_config(pc, addr);
++ } else {
++ addr = BCMA_CORE_PCI_PCICFG0;
++ addr |= (func << 8);
++ addr |= (off & 0xfc);
++ val = pcicore_read32(pc, addr);
++ }
++ } else {
++ addr = bcma_get_cfgspace_addr(pc, dev, func, off);
++ if (unlikely(!addr))
++ goto out;
++ err = -ENOMEM;
++ mmio = ioremap_nocache(addr, len);
++ if (!mmio)
++ goto out;
++
++ if (mips_busprobe32(val, mmio)) {
++ val = 0xffffffff;
++ goto unmap;
++ }
++
++ val = readl(mmio);
++ }
++ val >>= (8 * (off & 3));
++
++ switch (len) {
++ case 1:
++ *((u8 *)buf) = (u8)val;
++ break;
++ case 2:
++ *((u16 *)buf) = (u16)val;
++ break;
++ case 4:
++ *((u32 *)buf) = (u32)val;
++ break;
++ }
++ err = 0;
++unmap:
++ if (mmio)
++ iounmap(mmio);
++out:
++ return err;
++}
++
++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
++ unsigned int func, unsigned int off,
++ const void *buf, int len)
++{
++ int err = -EINVAL;
++ u32 addr = 0, val = 0;
++ void __iomem *mmio = 0;
++ u16 chipid = pc->core->bus->chipinfo.id;
++
++ WARN_ON(!pc->hostmode);
++ if (unlikely(len != 1 && len != 2 && len != 4))
++ goto out;
++ if (dev == 0) {
++ /* accesses to config registers with offsets >= 256
++ * requires indirect access.
++ */
++ if (off < PCI_CONFIG_SPACE_SIZE) {
++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
++ addr |= (func << 8);
++ addr |= (off & 0xfc);
++ mmio = ioremap_nocache(addr, len);
++ if (!mmio)
++ goto out;
++ }
++ } else {
++ addr = bcma_get_cfgspace_addr(pc, dev, func, off);
++ if (unlikely(!addr))
++ goto out;
++ err = -ENOMEM;
++ mmio = ioremap_nocache(addr, len);
++ if (!mmio)
++ goto out;
++
++ if (mips_busprobe32(val, mmio)) {
++ val = 0xffffffff;
++ goto unmap;
++ }
++ }
++
++ switch (len) {
++ case 1:
++ val = readl(mmio);
++ val &= ~(0xFF << (8 * (off & 3)));
++ val |= *((const u8 *)buf) << (8 * (off & 3));
++ break;
++ case 2:
++ val = readl(mmio);
++ val &= ~(0xFFFF << (8 * (off & 3)));
++ val |= *((const u16 *)buf) << (8 * (off & 3));
++ break;
++ case 4:
++ val = *((const u32 *)buf);
++ break;
++ }
++ if (dev == 0 && !addr) {
++ /* accesses to config registers with offsets >= 256
++ * requires indirect access.
++ */
++ addr = (func << 12);
++ addr |= (off & 0x0FFF);
++ bcma_pcie_write_config(pc, addr, val);
++ } else {
++ writel(val, mmio);
++
++ if (chipid == 0x4716 || chipid == 0x4748)
++ readl(mmio);
++ }
++
++ err = 0;
++unmap:
++ if (mmio)
++ iounmap(mmio);
++out:
++ return err;
++}
++
++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus,
++ unsigned int devfn,
++ int reg, int size, u32 *val)
++{
++ unsigned long flags;
++ int err;
++ struct bcma_drv_pci *pc;
++ struct bcma_drv_pci_host *pc_host;
++
++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops);
++ pc = pc_host->pdev;
++
++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags);
++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn),
++ PCI_FUNC(devfn), reg, val, size);
++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags);
++
++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
++
++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus,
++ unsigned int devfn,
++ int reg, int size, u32 val)
++{
++ unsigned long flags;
++ int err;
++ struct bcma_drv_pci *pc;
++ struct bcma_drv_pci_host *pc_host;
++
++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops);
++ pc = pc_host->pdev;
++
++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags);
++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn),
++ PCI_FUNC(devfn), reg, &val, size);
++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags);
++
++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
++
++/* return cap_offset if requested capability exists in the PCI config space */
++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc,
++ unsigned int dev,
++ unsigned int func, u8 req_cap_id,
++ unsigned char *buf, u32 *buflen)
++{
++ u8 cap_id;
++ u8 cap_ptr = 0;
++ u32 bufsize;
++ u8 byte_val;
++
++ /* check for Header type 0 */
++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
++ sizeof(u8));
++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
++ return cap_ptr;
++
++ /* check if the capability pointer field exists */
++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val,
++ sizeof(u8));
++ if (!(byte_val & PCI_STATUS_CAP_LIST))
++ return cap_ptr;
++
++ /* check if the capability pointer is 0x00 */
++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr,
++ sizeof(u8));
++ if (cap_ptr == 0x00)
++ return cap_ptr;
++
++ /* loop thr'u the capability list and see if the requested capabilty
++ * exists */
++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8));
++ while (cap_id != req_cap_id) {
++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr,
++ sizeof(u8));
++ if (cap_ptr == 0x00)
++ return cap_ptr;
++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id,
++ sizeof(u8));
++ }
++
++ /* found the caller requested capability */
++ if ((buf != NULL) && (buflen != NULL)) {
++ u8 cap_data;
++
++ bufsize = *buflen;
++ if (!bufsize)
++ return cap_ptr;
++
++ *buflen = 0;
++
++ /* copy the cpability data excluding cap ID and next ptr */
++ cap_data = cap_ptr + 2;
++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE)
++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data;
++ *buflen = bufsize;
++ while (bufsize--) {
++ bcma_extpci_read_config(pc, dev, func, cap_data, buf,
++ sizeof(u8));
++ cap_data++;
++ buf++;
++ }
++ }
++
++ return cap_ptr;
++}
++
++/* If the root port is capable of returning Config Request
++ * Retry Status (CRS) Completion Status to software then
++ * enable the feature.
++ */
++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc)
++{
++ u8 cap_ptr, root_ctrl, root_cap, dev;
++ u16 val16;
++ int i;
++
++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL,
++ NULL);
++ root_cap = cap_ptr + PCI_EXP_RTCAP;
++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16));
++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) {
++ /* Enable CRS software visibility */
++ root_ctrl = cap_ptr + PCI_EXP_RTCTL;
++ val16 = PCI_EXP_RTCTL_CRSSVE;
++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16,
++ sizeof(u16));
++
++ /* Initiate a configuration request to read the vendor id
++ * field of the device function's config space header after
++ * 100 ms wait time from the end of Reset. If the device is
++ * not done with its internal initialization, it must at
++ * least return a completion TLP, with a completion status
++ * of "Configuration Request Retry Status (CRS)". The root
++ * complex must complete the request to the host by returning
++ * a read-data value of 0001h for the Vendor ID field and
++ * all 1s for any additional bytes included in the request.
++ * Poll using the config reads for max wait time of 1 sec or
++ * until we receive the successful completion status. Repeat
++ * the procedure for all the devices.
++ */
++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) {
++ for (i = 0; i < 100000; i++) {
++ bcma_extpci_read_config(pc, dev, 0,
++ PCI_VENDOR_ID, &val16,
++ sizeof(val16));
++ if (val16 != 0x1)
++ break;
++ udelay(10);
++ }
++ if (val16 == 0x1)
++ pr_err("PCI: Broken device in slot %d\n", dev);
++ }
++ }
++}
+
+ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+ {
+- pr_err("No support for PCI core in hostmode yet\n");
++ struct bcma_bus *bus = pc->core->bus;
++ struct bcma_drv_pci_host *pc_host;
++ u32 tmp;
++ u32 pci_membase_1G;
++ unsigned long io_map_base;
++
++ pr_info("PCIEcore in host mode found\n");
++
++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
++ if (!pc_host) {
++ pr_err("can not allocate memory");
++ return;
++ }
++
++ pc->host_controller = pc_host;
++ pc_host->pci_controller.io_resource = &pc_host->io_resource;
++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops;
++ pc_host->pdev = pc;
++
++ pci_membase_1G = BCMA_SOC_PCI_DMA;
++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG;
++
++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config;
++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config;
++
++ pc_host->mem_resource.name = "BCMA PCIcore external memory",
++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA;
++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1;
++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
++
++ pc_host->io_resource.name = "BCMA PCIcore external I/O",
++ pc_host->io_resource.start = 0x100;
++ pc_host->io_resource.end = 0x7FF;
++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
++
++ /* Reset RC */
++ udelay(3000);
++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
++ udelay(1000);
++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
++ BCMA_CORE_PCI_CTL_RST_OE);
++
++ /* 64 MB I/O access window. On 4716, use
++ * sbtopcie0 to access the device registers. We
++ * can't use address match 2 (1 GB window) region
++ * as mips can't generate 64-bit address on the
++ * backplane.
++ */
++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) {
++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
++ BCMA_SOC_PCI_MEM_SZ - 1;
++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM);
++ } else if (bus->chipinfo.id == 0x5300) {
++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM;
++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF;
++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST;
++ if (pc->core->core_unit == 0) {
++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
++ BCMA_SOC_PCI_MEM_SZ - 1;
++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
++ tmp | BCMA_SOC_PCI_MEM);
++ } else if (pc->core->core_unit == 1) {
++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
++ BCMA_SOC_PCI_MEM_SZ - 1;
++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
++ tmp | BCMA_SOC_PCI1_MEM);
++ }
++ } else
++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
++ BCMA_CORE_PCI_SBTOPCI_IO);
++
++ /* 64 MB configuration access window */
++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0);
++
++ /* 1 GB memory access window */
++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2,
++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G);
++
++
++ /* As per PCI Express Base Spec 1.1 we need to wait for
++ * at least 100 ms from the end of a reset (cold/warm/hot)
++ * before issuing configuration requests to PCI Express
++ * devices.
++ */
++ udelay(100000);
++
++ bcma_core_pci_enable_crs(pc);
++
++ /* Enable PCI bridge BAR0 memory & master access */
++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
++
++ /* Enable PCI interrupts */
++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA);
++
++ /* Ok, ready to run, register it to the system.
++ * The following needs change, if we want to port hostmode
++ * to non-MIPS platform. */
++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM,
++ 0x04000000);
++ pc_host->pci_controller.io_map_base = io_map_base;
++ set_io_port_base(pc_host->pci_controller.io_map_base);
++ /* Give some time to the PCI controller to configure itself with the new
++ * values. Not waiting at this point causes crashes of the machine. */
++ mdelay(10);
++ register_pci_controller(&pc_host->pci_controller);
++ return;
++}
++
++/* Early PCI fixup for a device on the PCI-core bridge. */
++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev)
++{
++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
++ /* This is not a device on the PCI-core bridge. */
++ return;
++ }
++ if (PCI_SLOT(dev->devfn) != 0)
++ return;
++
++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev));
++
++ /* Enable PCI bridge bus mastering and memory space */
++ pci_set_master(dev);
++ if (pcibios_enable_device(dev, ~0) < 0) {
++ pr_err("PCI: BCMA bridge enable failed\n");
++ return;
++ }
++
++ /* Enable PCI bridge BAR1 prefetch and burst */
++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3);
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge);
++
++/* Early PCI fixup for all PCI-cores to set the correct memory address. */
++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
++{
++ struct resource *res;
++ int pos;
++
++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
++ /* This is not a device on the PCI-core bridge. */
++ return;
++ }
++ if (PCI_SLOT(dev->devfn) == 0)
++ return;
++
++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev));
++
++ for (pos = 0; pos < 6; pos++) {
++ res = &dev->resource[pos];
++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM))
++ pci_assign_resource(dev, pos);
++ }
++}
++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
++
++/* This function is called when doing a pci_enable_device().
++ * We must first check if the device is a device on the PCI-core bridge. */
++int bcma_core_pci_plat_dev_init(struct pci_dev *dev)
++{
++ struct bcma_drv_pci_host *pc_host;
++
++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
++ /* This is not a device on the PCI-core bridge. */
++ return -ENODEV;
++ }
++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
++ pci_ops);
++
++ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
++
++ /* Fix up interrupt lines */
++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++
++ return 0;
++}
++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init);
++
++/* PCI device IRQ mapping. */
++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev)
++{
++ struct bcma_drv_pci_host *pc_host;
++
++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
++ /* This is not a device on the PCI-core bridge. */
++ return -ENODEV;
++ }
++
++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
++ pci_ops);
++ return bcma_core_mips_irq(pc_host->pdev->core) + 2;
+ }
++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
+--- a/include/linux/bcma/bcma_driver_pci.h
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -160,9 +160,40 @@ struct pci_dev;
+ /* PCIcore specific boardflags */
+ #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
+
++/* PCIE Config space accessing MACROS */
++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */
++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */
++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */
++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */
++
++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */
++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */
++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */
++
++/* PCIE Root Capability Register bits (Host mode only) */
++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
++
++struct bcma_drv_pci;
++
++struct bcma_drv_pci_host {
++ struct bcma_drv_pci *pdev;
++
++ u32 host_cfg_addr;
++ spinlock_t cfgspace_lock;
++
++ struct pci_controller pci_controller;
++ struct pci_ops pci_ops;
++ struct resource mem_resource;
++ struct resource io_resource;
++};
++
+ struct bcma_drv_pci {
+ struct bcma_device *core;
+ u8 setup_done:1;
++ u8 hostmode:1;
++
++ struct bcma_drv_pci_host *host_controller;
+ };
+
+ /* Register access */
+@@ -173,4 +204,7 @@ extern void __devinit bcma_core_pci_init
+ extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
+ struct bcma_device *core, bool enable);
+
++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
++
+ #endif /* LINUX_BCMA_DRIVER_PCI_H_ */
+--- a/include/linux/bcma/bcma_regs.h
++++ b/include/linux/bcma/bcma_regs.h
+@@ -56,4 +56,31 @@
+ #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
+ #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
+
++/* SiliconBackplane Address Map.
++ * All regions may not exist on all chips.
++ */
++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */
++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */
++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024)
++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */
++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */
++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */
++
++
++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */
++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */
++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */
++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2
++ * (2 ZettaBytes), low 32 bits
++ */
++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2
++ * (2 ZettaBytes), high 32 bits
++ */
++
++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */
++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */
++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2
++ * (2 ZettaBytes), high 32 bits
++ */
++
+ #endif /* LINUX_BCMA_REGS_H_ */
diff --git a/target/linux/brcm47xx/patches-3.2/0041-bcma-add-bus-num-counter.patch b/target/linux/brcm47xx/patches-3.2/0041-bcma-add-bus-num-counter.patch
new file mode 100644
index 0000000..8d49e1c
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0041-bcma-add-bus-num-counter.patch
@@ -0,0 +1,59 @@
+From eecd733c14952b074d7488934a4f3dc83c9c426b Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 14 Jan 2012 16:29:51 +0100
+Subject: [PATCH 28/32] bcma: add bus num counter
+
+If we have two bcma buses on one computer the second will not work
+without this patch. Now each bus gets an own number.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/main.c | 12 +++++++++++-
+ include/linux/bcma/bcma.h | 1 +
+ 2 files changed, 12 insertions(+), 1 deletions(-)
+
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -13,6 +13,12 @@
+ MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+ MODULE_LICENSE("GPL");
+
++/* contains the number the next bus should get. */
++static unsigned int bcma_bus_next_num = 0;
++
++/* bcma_buses_mutex locks the bcma_bus_next_num */
++static DEFINE_MUTEX(bcma_buses_mutex);
++
+ static int bcma_bus_match(struct device *dev, struct device_driver *drv);
+ static int bcma_device_probe(struct device *dev);
+ static int bcma_device_remove(struct device *dev);
+@@ -93,7 +99,7 @@ static int bcma_register_cores(struct bc
+
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
+
+ switch (bus->hosttype) {
+ case BCMA_HOSTTYPE_PCI:
+@@ -137,6 +143,10 @@ int __devinit bcma_bus_register(struct b
+ int err;
+ struct bcma_device *core;
+
++ mutex_lock(&bcma_buses_mutex);
++ bus->num = bcma_bus_next_num++;
++ mutex_unlock(&bcma_buses_mutex);
++
+ /* Scan for devices (cores) */
+ err = bcma_bus_scan(bus);
+ if (err) {
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -197,6 +197,7 @@ struct bcma_bus {
+ struct list_head cores;
+ u8 nr_cores;
+ u8 init_done:1;
++ u8 num;
+
+ struct bcma_drv_cc drv_cc;
+ struct bcma_drv_pci drv_pci;
diff --git a/target/linux/brcm47xx/patches-3.2/0042-bcma-add-new-PCI-ID.patch b/target/linux/brcm47xx/patches-3.2/0042-bcma-add-new-PCI-ID.patch
new file mode 100644
index 0000000..efce69f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0042-bcma-add-new-PCI-ID.patch
@@ -0,0 +1,24 @@
+From 699c57a18b40ffbe1763915acdc1a3e4fb539d01 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 13 Jan 2012 17:42:15 +0100
+Subject: [PATCH 29/32] bcma: add new PCI ID
+
+This ID was found on the PCIe wireless card on the board of a Netgear
+WNDR3400 using a bcm4716. The device with this ID is identified by b43
+as "Broadcom 43224 WLAN".
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/host_pci.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0xa8d8) },
+ { 0, },
+ };
+ MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
diff --git a/target/linux/brcm47xx/patches-3.2/0043-bcma-add-extra-sprom-check.patch b/target/linux/brcm47xx/patches-3.2/0043-bcma-add-extra-sprom-check.patch
new file mode 100644
index 0000000..0dd1968
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0043-bcma-add-extra-sprom-check.patch
@@ -0,0 +1,63 @@
+From 1cd3d0de72e42161fe0df355c5429459265aeef0 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 14 Jan 2012 16:11:17 +0100
+Subject: [PATCH 30/32] bcma: add extra sprom check
+
+This check is needed on the BCM43224 device as it says in the
+capabilities it has an sprom but is extra check says it has not.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/sprom.c | 8 ++++++++
+ include/linux/bcma/bcma_driver_chipcommon.h | 16 ++++++++++++++++
+ 2 files changed, 24 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -210,6 +210,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ {
+ u16 offset;
+ u16 *sprom;
++ u32 sromctrl;
+ int err = 0;
+
+ if (!bus->drv_cc.core)
+@@ -220,6 +221,13 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ return -ENOENT;
+ }
+
++ if (bus->drv_cc.core->id.rev >= 32) {
++ sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL);
++ if (!(sromctrl & BCMA_CC_SROM_CONTROL_PRESENT))
++ random_ether_addr(bus->sprom.il0mac);
++ return -ENOENT;
++ }
++
+ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+ GFP_KERNEL);
+ if (!sprom)
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -239,6 +239,22 @@
+ #define BCMA_CC_FLASH_CFG 0x0128
+ #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
+ #define BCMA_CC_FLASH_WAITCNT 0x012C
++#define BCMA_CC_SROM_CONTROL 0x0190
++#define BCMA_CC_SROM_CONTROL_START 0x80000000
++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000
++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000
++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000
++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000
++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000
++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000
++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010
++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008
++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006
++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000
++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002
++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004
++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1
++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001
+ /* 0x1E0 is defined as shared BCMA_CLKCTLST */
+ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
+ #define BCMA_CC_UART0_DATA 0x0300
diff --git a/target/linux/brcm47xx/patches-3.2/0046-bcma-complete-workaround-for-BCMA43224.patch b/target/linux/brcm47xx/patches-3.2/0046-bcma-complete-workaround-for-BCMA43224.patch
new file mode 100644
index 0000000..97e3f9c
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0046-bcma-complete-workaround-for-BCMA43224.patch
@@ -0,0 +1,52 @@
+From efe89df0326b777563d197b8cf1c25209a31ceb0 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 21 Jan 2012 18:47:42 +0100
+Subject: [PATCH 32/34] bcma: complete workaround for BCMA43224
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/driver_chipcommon_pmu.c | 15 +++++++++++----
+ include/linux/bcma/bcma_driver_chipcommon.h | 5 +++++
+ 2 files changed, 16 insertions(+), 4 deletions(-)
+
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -141,12 +141,19 @@ void bcma_pmu_workarounds(struct bcma_dr
+ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */
+ break;
+ case 43224:
++ case 43421:
++ /* enable 12 mA drive strenth for 43224 and set chipControl register bit 15 */
+ if (bus->chipinfo.rev == 0) {
+- pr_err("Workarounds for 43224 rev 0 not fully "
+- "implemented\n");
+- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
++ BCMA_CCTRL_43224_GPIO_TOGGLE,
++ BCMA_CCTRL_43224_GPIO_TOGGLE);
++ bcma_chipco_chipctl_maskset(cc, 0,
++ BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
++ BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
+ } else {
+- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
++ bcma_chipco_chipctl_maskset(cc, 0,
++ BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
++ BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
+ }
+ break;
+ case 43225:
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -374,6 +374,11 @@
+ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
+ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
+
++/* 43224 chip-specific ChipControl register bits */
++#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */
++#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */
++#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */
++
+ #define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
+ #define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
+ #define BCMA_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
diff --git a/target/linux/brcm47xx/patches-3.2/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-3.2/601-mips-remove-pci-collision-check.patch
deleted file mode 100644
index 7860ca0..0000000
--- a/target/linux/brcm47xx/patches-3.2/601-mips-remove-pci-collision-check.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru
- if ((idx == PCI_ROM_RESOURCE) &&
- (!(r->flags & IORESOURCE_ROM_ENABLE)))
- continue;
-- if (!r->start && r->end) {
-- printk(KERN_ERR "PCI: Device %s not available "
-- "because of resource collisions\n",
-+ if (!r->start && r->end)
-+ printk(KERN_WARNING "PCI: Device %s resource"
-+ "collisions detected. Ignoring...\n",
- pci_name(dev));
-- return -EINVAL;
-- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)