summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/linux/ixp4xx/patches-2.6.28/191-cambria_optional_uart.patch111
1 files changed, 94 insertions, 17 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.28/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.28/191-cambria_optional_uart.patch
index 946d685..e753154 100644
--- a/target/linux/ixp4xx/patches-2.6.28/191-cambria_optional_uart.patch
+++ b/target/linux/ixp4xx/patches-2.6.28/191-cambria_optional_uart.patch
@@ -8,7 +8,7 @@
struct cambria_board_info {
unsigned char *model;
-@@ -127,6 +128,43 @@ static struct platform_device cambria_ua
+@@ -127,6 +128,45 @@ static struct platform_device cambria_ua
.resource = &cambria_uart_resource,
};
@@ -27,16 +27,18 @@
+
+static struct plat_serial8250_port cambria_optional_uart_data[] = {
+ {
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_BUGGY_UART,
-+ .iotype = UPIO_MEM,
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM_DELAY,
+ .regshift = 0,
+ .uartclk = 1843200,
++ .rw_delay = 2,
+ },
+ {
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_BUGGY_UART,
-+ .iotype = UPIO_MEM,
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM_DELAY,
+ .regshift = 0,
+ .uartclk = 1843200,
++ .rw_delay = 2,
+ },
+ { },
+};
@@ -52,17 +54,17 @@
static struct resource cambria_pata_resources[] = {
{
.flags = IORESOURCE_MEM
-@@ -283,6 +321,19 @@ static void __init cambria_gw23xx_setup(
+@@ -283,6 +323,19 @@ static void __init cambria_gw23xx_setup(
static void __init cambria_gw2350_setup(void)
{
-+ *IXP4XX_EXP_CS2 = 0xbfff0003;
++ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
+ set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
+ cambria_optional_uart_data[0].mapbase = 0x52FF0000;
+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
+
-+ *IXP4XX_EXP_CS3 = 0xbfff0003;
++ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
+ cambria_optional_uart_data[1].mapbase = 0x53FF0000;
+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
@@ -72,18 +74,11 @@
platform_device_register(&cambria_npec_device);
platform_device_register(&cambria_npea_device);
-@@ -290,10 +341,26 @@ static void __init cambria_gw2350_setup(
- platform_device_register(&cambria_usb1_device);
-
- platform_device_register(&cambria_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
- }
+@@ -294,6 +347,19 @@ static void __init cambria_gw2350_setup(
static void __init cambria_gw2358_setup(void)
{
-+ *IXP4XX_EXP_CS3 = 0xbfff0003;
++ *IXP4XX_EXP_CS3 = 0xBFFF3C433;
+ set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
+ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
@@ -99,3 +94,85 @@
platform_device_register(&cambria_npec_device);
platform_device_register(&cambria_npea_device);
+--- a/include/linux/serial_8250.h
++++ b/include/linux/serial_8250.h
+@@ -26,6 +26,7 @@ struct plat_serial8250_port {
+ void *private_data;
+ unsigned char regshift; /* register shift */
+ unsigned char iotype; /* UPIO_* */
++ unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
+ unsigned char hub6;
+ upf_t flags; /* UPF_* flags */
+ };
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -262,6 +262,7 @@ struct uart_port {
+ #define UPIO_TSI (5) /* Tsi108/109 type IO */
+ #define UPIO_DWAPB (6) /* DesignWare APB UART */
+ #define UPIO_RM9000 (7) /* RM9000 type IO */
++#define UPIO_MEM_DELAY (8)
+
+ unsigned int read_status_mask; /* driver specific */
+ unsigned int ignore_status_mask; /* driver specific */
+@@ -301,6 +302,7 @@ struct uart_port {
+
+ unsigned int mctrl; /* current modem ctrl settings */
+ unsigned int timeout; /* character-based timeout */
++ unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
+ unsigned int type; /* port type */
+ const struct uart_ops *ops;
+ unsigned int custom_divisor;
+--- a/drivers/serial/8250.c
++++ b/drivers/serial/8250.c
+@@ -373,6 +373,8 @@ static unsigned int serial_in(struct uar
+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
+ return inb(up->port.iobase + 1);
+
++ case UPIO_MEM_DELAY:
++ udelay(up->port.rw_delay);
+ case UPIO_MEM:
+ case UPIO_DWAPB:
+ return readb(up->port.membase + offset);
+@@ -411,6 +413,8 @@ serial_out(struct uart_8250_port *up, in
+ outb(value, up->port.iobase + 1);
+ break;
+
++ case UPIO_MEM_DELAY:
++ udelay(up->port.rw_delay);
+ case UPIO_MEM:
+ writeb(value, up->port.membase + offset);
+ break;
+@@ -2823,6 +2827,7 @@ static int __devinit serial8250_probe(st
+ port.hub6 = p->hub6;
+ port.private_data = p->private_data;
+ port.dev = &dev->dev;
++ port.rw_delay = p->rw_delay;
+ if (share_irqs)
+ port.flags |= UPF_SHARE_IRQ;
+ ret = serial8250_register_port(&port);
+@@ -2972,6 +2977,7 @@ int serial8250_register_port(struct uart
+ uart->port.iotype = port->iotype;
+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = port->mapbase;
++ uart->port.rw_delay = port->rw_delay;
+ uart->port.private_data = port->private_data;
+ if (port->dev)
+ uart->port.dev = port->dev;
+--- a/drivers/serial/serial_core.c
++++ b/drivers/serial/serial_core.c
+@@ -2161,6 +2161,7 @@ uart_report_port(struct uart_driver *drv
+ snprintf(address, sizeof(address),
+ "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
+ break;
++ case UPIO_MEM_DELAY:
+ case UPIO_MEM:
+ case UPIO_MEM32:
+ case UPIO_AU:
+@@ -2577,6 +2578,7 @@ int uart_match_port(struct uart_port *po
+ case UPIO_HUB6:
+ return (port1->iobase == port2->iobase) &&
+ (port1->hub6 == port2->hub6);
++ case UPIO_MEM_DELAY:
+ case UPIO_MEM:
+ case UPIO_MEM32:
+ case UPIO_AU: