diff options
-rw-r--r-- | target/linux/ar71xx/config-3.10 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c | 176 | ||||
-rw-r--r-- | target/linux/ar71xx/mikrotik/config-default | 2 | ||||
-rw-r--r-- | target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch | 39 |
4 files changed, 218 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 2d6f404..f0568b0 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -64,6 +64,7 @@ CONFIG_ATH79_MACH_PB92=y # CONFIG_ATH79_MACH_RB2011 is not set # CONFIG_ATH79_MACH_RB4XX is not set # CONFIG_ATH79_MACH_RB750 is not set +# CONFIG_ATH79_MACH_RB91X is not set # CONFIG_ATH79_MACH_RB95X is not set CONFIG_ATH79_MACH_RW2458N=y CONFIG_ATH79_MACH_TEW_632BRP=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c new file mode 100644 index 0000000..65d9ee5 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c @@ -0,0 +1,176 @@ +/* + * MikroTik RouterBOARD 91X support + * + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "rb91x: " fmt + +#include <linux/phy.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/74x164.h> +#include <linux/spi/flash.h> +#include <linux/routerboot.h> +#include <linux/gpio.h> + +#include <asm/prom.h> +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ath79_spi_platform.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-nfc.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" +#include "routerboot.h" + +#define RB_ROUTERBOOT_OFFSET 0x0000 +#define RB_ROUTERBOOT_MIN_SIZE 0xb000 +#define RB_HARD_CFG_SIZE 0x1000 +#define RB_BIOS_OFFSET 0xd000 +#define RB_BIOS_SIZE 0x1000 +#define RB_SOFT_CFG_OFFSET 0xf000 +#define RB_SOFT_CFG_SIZE 0x1000 + +#define RB91X_FLAG_USB BIT(0) +#define RB91X_FLAG_PCIE BIT(1) + +struct rb_board_info { + const char *name; + u32 flags; +}; + +static struct mtd_partition rb711gr100_spi_partitions[] = { + { + .name = "routerboot", + .offset = RB_ROUTERBOOT_OFFSET, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "hard_config", + .size = RB_HARD_CFG_SIZE, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "bios", + .offset = RB_BIOS_OFFSET, + .size = RB_BIOS_SIZE, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "soft_config", + .size = RB_SOFT_CFG_SIZE, + } +}; + +static struct flash_platform_data rb711gr100_spi_flash_data = { + .parts = rb711gr100_spi_partitions, + .nr_parts = ARRAY_SIZE(rb711gr100_spi_partitions), +}; + +static void __init rb711gr100_init_partitions(const struct rb_info *info) +{ + rb711gr100_spi_partitions[0].size = info->hard_cfg_offs; + rb711gr100_spi_partitions[1].offset = info->hard_cfg_offs; + + rb711gr100_spi_partitions[3].offset = info->soft_cfg_offs; +} + +void __init rb711gr100_wlan_init(void) +{ + char *caldata; + u8 wlan_mac[ETH_ALEN]; + + caldata = rb_get_wlan_data(); + if (caldata == NULL) + return; + + ath79_init_mac(wlan_mac, ath79_mac_base, 1); + ath79_register_wmac(caldata + 0x1000, wlan_mac); + + kfree(caldata); +} + +#define RB_BOARD_INFO(_name, _flags) \ + { \ + .name = (_name), \ + .flags = (_flags), \ + } + +static const struct rb_board_info rb711gr100_boards[] __initconst = { + RB_BOARD_INFO("911G-2HPnD", 0), + RB_BOARD_INFO("911G-5HPnD", 0), + RB_BOARD_INFO("912UAG-2HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE), + RB_BOARD_INFO("912UAG-5HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE), +}; + +static u32 rb711gr100_get_flags(const struct rb_info *info) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(rb711gr100_boards); i++) { + const struct rb_board_info *bi; + + bi = &rb711gr100_boards[i]; + if (strcmp(info->board_name, bi->name) == 0) + return bi->flags; + } + + return 0; +} + +static void __init rb711gr100_setup(void) +{ + const struct rb_info *info; + char buf[64]; + u32 flags; + + info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000); + if (!info) + return; + + scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s", + (info->board_name) ? info->board_name : ""); + mips_set_machine_name(buf); + + rb711gr100_init_partitions(info); + ath79_register_m25p80(&rb711gr100_spi_flash_data); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | + AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + + ath79_register_eth(0); + + rb711gr100_wlan_init(); + + platform_device_register_simple("rb91x-nand", -1, NULL, 0); + + flags = rb711gr100_get_flags(info); + + if (flags & RB91X_FLAG_USB) + ath79_register_usb(); + + if (flags & RB91X_FLAG_PCIE) + ath79_register_pci(); + +} + +MIPS_MACHINE_NONAME(ATH79_MACH_RB_711GR100, "711Gr100", rb711gr100_setup); diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index d9a8102..0c64d31 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -37,6 +37,7 @@ CONFIG_ATH79_MACH_RB2011=y CONFIG_ATH79_MACH_RB4XX=y CONFIG_ATH79_MACH_RB750=y +CONFIG_ATH79_MACH_RB91X=y CONFIG_ATH79_MACH_RB95X=y # CONFIG_ATH79_MACH_RW2458N is not set # CONFIG_ATH79_MACH_TEW_632BRP is not set @@ -98,6 +99,7 @@ CONFIG_MTD_NAND_AR934X=y CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND_RB4XX=y CONFIG_MTD_NAND_RB750=y +CONFIG_MTD_NAND_RB91X=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_TPLINK_PARTS is not set diff --git a/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch b/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch new file mode 100644 index 0000000..59679a2 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -75,6 +75,7 @@ enum ath79_mach_type { + ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ + ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ + ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ ++ ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */ + ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ + ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ + ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -391,6 +391,16 @@ config ATH79_MACH_RB750 + select ATH79_ROUTERBOOT + select RLE_DECOMPRESS + ++config ATH79_MACH_RB91X ++ bool "MikroTik RouterBOARD 91X support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ select ATH79_ROUTERBOOT ++ select RLE_DECOMPRESS ++ + config ATH79_MACH_RB95X + bool "MikroTik RouterBOARD 95X support" + select SOC_AR934X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -78,6 +78,7 @@ obj-$(CONFIG_ATH79_MACH_PB44) += mach-p + obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o + obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o + obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o ++obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o + obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o + obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o + obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o |