diff options
46 files changed, 77 insertions, 298 deletions
diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 8a2def4..1c4b711 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -17,8 +17,8 @@ endif ifeq ($(LINUX_VERSION),3.9.11) LINUX_KERNEL_MD5SUM:=edbf88eb7f7d34dbd5d3887726790755 endif -ifeq ($(LINUX_VERSION),3.10.32) - LINUX_KERNEL_MD5SUM:=58bfaf95f4e23be2d658dab0a7fb9615 +ifeq ($(LINUX_VERSION),3.10.34) + LINUX_KERNEL_MD5SUM:=30991b495a3d75196d5608072d2e62e6 endif ifeq ($(LINUX_VERSION),3.12.10) LINUX_KERNEL_MD5SUM:=93325074b7b1d7bb76fb7d4348f0aa7a diff --git a/target/linux/ar7/Makefile b/target/linux/ar7/Makefile index 4b482de..c49356d 100644 --- a/target/linux/ar7/Makefile +++ b/target/linux/ar7/Makefile @@ -13,7 +13,7 @@ FEATURES:=squashfs atm MAINTAINER:=Florian Fainelli <florian@openwrt.org> SUBTARGETS:=generic ac49x -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/ar71xx/Makefile b/target/linux/ar71xx/Makefile index d8a484e..fe54a52 100644 --- a/target/linux/ar71xx/Makefile +++ b/target/linux/ar71xx/Makefile @@ -13,7 +13,7 @@ FEATURES:=mips16 CPU_TYPE=34kc SUBTARGETS:=generic nand mikrotik -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch b/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch deleted file mode 100644 index 4665794..0000000 --- a/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 3a7853f0dd24e81dc920c98a5c7e8cfdde81bb45 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 16 Jan 2014 16:58:58 +0100 -Subject: [PATCH] spi-ath79: fix initial GPIO CS line setup - -The 'ath79_spi_setup_cs' function initializes the chip -select line of a given SPI device in order to make sure -that the device is inactive. - -If the SPI_CS_HIGH bit is set for a given device, it -means that the CS line of that device is active HIGH -so it must be set to LOW initially. In case of GPIO -CS lines, the 'ath79_spi_setup_cs' function does the -opposite of that due to the wrong GPIO flags. - -Fix the code to use the correct GPIO flags. - -Reported-by: Ronald Wahl <ronald.wahl@raritan.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - drivers/spi/spi-ath79.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -132,9 +132,9 @@ static int ath79_spi_setup_cs(struct spi - - flags = GPIOF_DIR_OUT; - if (spi->mode & SPI_CS_HIGH) -- flags |= GPIOF_INIT_HIGH; -- else - flags |= GPIOF_INIT_LOW; -+ else -+ flags |= GPIOF_INIT_HIGH; - - status = gpio_request_one(cdata->gpio, flags, - dev_name(&spi->dev)); diff --git a/target/linux/atheros/Makefile b/target/linux/atheros/Makefile index bf6a29e..36a2f46 100644 --- a/target/linux/atheros/Makefile +++ b/target/linux/atheros/Makefile @@ -11,7 +11,7 @@ BOARD:=atheros BOARDNAME:=Atheros AR231x/AR5312 FEATURES:=squashfs -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/avr32/Makefile b/target/linux/avr32/Makefile index 6800ce4..2215d23 100644 --- a/target/linux/avr32/Makefile +++ b/target/linux/avr32/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Atmel AVR32 FEATURES:=squashfs MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/bcm53xx/Makefile b/target/linux/bcm53xx/Makefile index 0b16768..edcf137 100644 --- a/target/linux/bcm53xx/Makefile +++ b/target/linux/bcm53xx/Makefile @@ -13,7 +13,7 @@ FEATURES:=squashfs usb pci pcie gpio MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de> CPU_TYPE:=cortex-a9 -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/brcm2708/Makefile b/target/linux/brcm2708/Makefile index f83d6f5..038c195 100644 --- a/target/linux/brcm2708/Makefile +++ b/target/linux/brcm2708/Makefile @@ -15,7 +15,7 @@ MAINTAINER:=Florian Fainelli <florian@openwrt.org> CPU_TYPE:=arm1176jzf-s CPU_SUBTYPE:=vfp -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += brcm2708-gpu-fw kmod-usb-hid kmod-sound-core kmod-sound-arm-bcm2835 diff --git a/target/linux/brcm2708/patches-3.10/0128-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch b/target/linux/brcm2708/patches-3.10/0128-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch index 68650cf..9c049b4 100644 --- a/target/linux/brcm2708/patches-3.10/0128-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch +++ b/target/linux/brcm2708/patches-3.10/0128-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch @@ -62,7 +62,7 @@ Subject: [PATCH 128/174] config: Enable CONFIG_MEMCG, but leave it disabled */ --- a/mm/memcontrol.c +++ b/mm/memcontrol.c -@@ -6956,6 +6956,7 @@ struct cgroup_subsys mem_cgroup_subsys = +@@ -6970,6 +6970,7 @@ struct cgroup_subsys mem_cgroup_subsys = .base_cftypes = mem_cgroup_files, .early_init = 0, .use_id = 1, diff --git a/target/linux/brcm47xx/Makefile b/target/linux/brcm47xx/Makefile index 4576ac3..ebc77c6 100644 --- a/target/linux/brcm47xx/Makefile +++ b/target/linux/brcm47xx/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Broadcom BCM47xx/53xx (MIPS) FEATURES:=squashfs usb pcmcia MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += swconfig wpad-mini nvram \ diff --git a/target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch b/target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch index f1c68ba..eb5391c 100644 --- a/target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch +++ b/target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch @@ -129,7 +129,7 @@ tp->phy_flags |= TG3_PHYFLG_IS_LOW_POWER; -@@ -11783,7 +11790,7 @@ static int tg3_get_settings(struct net_d +@@ -11782,7 +11789,7 @@ static int tg3_get_settings(struct net_d struct phy_device *phydev; if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED)) return -EAGAIN; @@ -138,7 +138,7 @@ return phy_ethtool_gset(phydev, cmd); } -@@ -11850,7 +11857,7 @@ static int tg3_set_settings(struct net_d +@@ -11849,7 +11856,7 @@ static int tg3_set_settings(struct net_d struct phy_device *phydev; if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED)) return -EAGAIN; @@ -147,7 +147,7 @@ return phy_ethtool_sset(phydev, cmd); } -@@ -12007,7 +12014,7 @@ static int tg3_nway_reset(struct net_dev +@@ -12006,7 +12013,7 @@ static int tg3_nway_reset(struct net_dev if (tg3_flag(tp, USE_PHYLIB)) { if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED)) return -EAGAIN; @@ -156,7 +156,7 @@ } else { u32 bmcr; -@@ -12123,7 +12130,7 @@ static int tg3_set_pauseparam(struct net +@@ -12122,7 +12129,7 @@ static int tg3_set_pauseparam(struct net u32 newadv; struct phy_device *phydev; @@ -165,7 +165,7 @@ if (!(phydev->supported & SUPPORTED_Pause) || (!(phydev->supported & SUPPORTED_Asym_Pause) && -@@ -13557,7 +13564,7 @@ static int tg3_ioctl(struct net_device * +@@ -13556,7 +13563,7 @@ static int tg3_ioctl(struct net_device * struct phy_device *phydev; if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED)) return -EAGAIN; @@ -174,7 +174,7 @@ return phy_mii_ioctl(phydev, ifr, cmd); } -@@ -17193,8 +17200,10 @@ static int tg3_init_one(struct pci_dev * +@@ -17192,8 +17199,10 @@ static int tg3_init_one(struct pci_dev * tg3_flag_set(tp, FLUSH_POSTED_WRITES); if (ssb_gige_one_dma_at_once(pdev)) tg3_flag_set(tp, ONE_DMA_AT_ONCE); @@ -186,7 +186,7 @@ if (ssb_gige_is_rgmii(pdev)) tg3_flag_set(tp, RGMII_MODE); } -@@ -17464,7 +17473,7 @@ static int tg3_init_one(struct pci_dev * +@@ -17463,7 +17472,7 @@ static int tg3_init_one(struct pci_dev * if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) { struct phy_device *phydev; diff --git a/target/linux/brcm63xx/Makefile b/target/linux/brcm63xx/Makefile index 5e58188..12a775e 100644 --- a/target/linux/brcm63xx/Makefile +++ b/target/linux/brcm63xx/Makefile @@ -11,7 +11,7 @@ BOARD:=brcm63xx BOARDNAME:=Broadcom BCM63xx SUBTARGETS:=generic smp FEATURES:=squashfs usb atm pci pcmcia usbgadget -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 MAINTAINER:=Florian Fainelli <florian@openwrt.org> include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch index eaf7503..154ab5c 100644 --- a/target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch +++ b/target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch @@ -31,7 +31,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> static struct clk clk_usbd = { --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c -@@ -386,7 +386,6 @@ static inline void set_clocks(struct bcm +@@ -392,7 +392,6 @@ static inline void set_clocks(struct bcm if (is_enabled) { clk_enable(udc->usbh_clk); clk_enable(udc->usbd_clk); diff --git a/target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch index 88217bd..952fd9a 100644 --- a/target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch +++ b/target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch @@ -108,7 +108,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> #define DRV_MODULE_NAME "bcm63xx_udc" -@@ -863,22 +864,7 @@ static void bcm63xx_select_phy_mode(stru +@@ -869,22 +870,7 @@ static void bcm63xx_select_phy_mode(stru bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG); } @@ -132,7 +132,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> } /** -@@ -892,14 +878,9 @@ static void bcm63xx_select_phy_mode(stru +@@ -898,14 +884,9 @@ static void bcm63xx_select_phy_mode(stru */ static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on) { diff --git a/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch b/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch deleted file mode 100644 index f13a13d..0000000 --- a/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch +++ /dev/null @@ -1,168 +0,0 @@ -From a864a5b3efe9dce1647172d105559a1b850cf4c9 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli <florian@openwrt.org> -Date: Tue, 14 Jan 2014 15:29:25 -0800 -Subject: [PATCH] usb: gadget: bcm63xx_udc: fix build failure on DMA channel - code - -Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet") -changed the ENETDMA[CS] macros such that they are no longer macros, but -actual register offset definitions. The bcm63xx_udc driver was not -updated, and as a result, causes the following build error to pop up: - - CC drivers/usb/gadget/u_ether.o -drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write': -drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not -a function -drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel': -drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not -a function -drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not -a function - -Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to -take an extra channel argument, and use the channel width -(ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence -doing again what the macro implicitely did for us. - -CC: Kevin Cernekee <cernekee@gmail.com> -CC: Jonas Gorski <jogo@openwrt.org> -CC: stable@vger.kernel.org -Signed-off-by: Florian Fainelli <florian@openwrt.org> ---- -Felipe, - -This is against your branch as balbi/usb.git, and this fix should be applied to -stable 3.11 onwards. - -Thanks! - - drivers/usb/gadget/bcm63xx_udc.c | 58 ++++++++++++++++++++++------------------ - 1 file changed, 32 insertions(+), 26 deletions(-) - ---- a/drivers/usb/gadget/bcm63xx_udc.c -+++ b/drivers/usb/gadget/bcm63xx_udc.c -@@ -362,24 +362,30 @@ static inline void usb_dma_writel(struct - bcm_writel(val, udc->iudma_regs + off); - } - --static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off) -+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan) - { -- return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off); -+ return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off + -+ (ENETDMA_CHAN_WIDTH * chan)); - } - --static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off) -+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off, -+ int chan) - { -- bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off); -+ bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off + -+ (ENETDMA_CHAN_WIDTH * chan)); - } - --static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off) -+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan) - { -- return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off); -+ return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off + -+ (ENETDMA_CHAN_WIDTH * chan)); - } - --static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off) -+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off, -+ int chan) - { -- bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off); -+ bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off + -+ (ENETDMA_CHAN_WIDTH * chan)); - } - - static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) -@@ -639,7 +645,7 @@ static void iudma_write(struct bcm63xx_u - } while (!last_bd); - - usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, -- ENETDMAC_CHANCFG_REG(iudma->ch_idx)); -+ ENETDMAC_CHANCFG_REG, iudma->ch_idx); - } - - /** -@@ -695,9 +701,9 @@ static void iudma_reset_channel(struct b - bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); - - /* stop DMA, then wait for the hardware to wrap up */ -- usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx)); -+ usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx); - -- while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) & -+ while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) & - ENETDMAC_CHANCFG_EN_MASK) { - udelay(1); - -@@ -714,10 +720,10 @@ static void iudma_reset_channel(struct b - dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", - ch_idx); - usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, -- ENETDMAC_CHANCFG_REG(ch_idx)); -+ ENETDMAC_CHANCFG_REG, ch_idx); - } - } -- usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx)); -+ usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx); - - /* don't leave "live" HW-owned entries for the next guy to step on */ - for (d = iudma->bd_ring; d <= iudma->end_bd; d++) -@@ -729,11 +735,11 @@ static void iudma_reset_channel(struct b - - /* set up IRQs, UBUS burst size, and BD base for this channel */ - usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, -- ENETDMAC_IRMASK_REG(ch_idx)); -- usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx)); -+ ENETDMAC_IRMASK_REG, ch_idx); -+ usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx); - -- usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx)); -- usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx)); -+ usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx); -+ usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx); - } - - /** -@@ -2016,7 +2022,7 @@ static irqreturn_t bcm63xx_udc_data_isr( - spin_lock(&udc->lock); - - usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, -- ENETDMAC_IR_REG(iudma->ch_idx)); -+ ENETDMAC_IR_REG, iudma->ch_idx); - bep = iudma->bep; - rc = iudma_read(udc, iudma); - -@@ -2156,18 +2162,18 @@ static int bcm63xx_iudma_dbg_show(struct - seq_printf(s, " [ep%d]:\n", - max_t(int, iudma_defaults[ch_idx].ep_num, 0)); - seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", -- usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)), -- usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)), -- usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)), -- usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx))); -+ usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx), -+ usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx), -+ usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx), -+ usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx)); - -- sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx)); -- sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx)); -+ sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx); -+ sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx); - seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", -- usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)), -+ usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx), - sram2 >> 16, sram2 & 0xffff, - sram3 >> 16, sram3 & 0xffff, -- usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx))); -+ usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx)); - seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, - iudma->n_bds); - diff --git a/target/linux/cns21xx/Makefile b/target/linux/cns21xx/Makefile index c0fee09..24981e0 100644 --- a/target/linux/cns21xx/Makefile +++ b/target/linux/cns21xx/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Econa CNS21xx FEATURES:=squashfs CPU_TYPE:=fa526 -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/generic/patches-3.10/721-phy_packets.patch b/target/linux/generic/patches-3.10/721-phy_packets.patch index e21e272..dcdd102 100644 --- a/target/linux/generic/patches-3.10/721-phy_packets.patch +++ b/target/linux/generic/patches-3.10/721-phy_packets.patch @@ -79,7 +79,7 @@ help --- a/net/core/dev.c +++ b/net/core/dev.c -@@ -2576,9 +2576,19 @@ int dev_hard_start_xmit(struct sk_buff * +@@ -2581,9 +2581,19 @@ int dev_hard_start_xmit(struct sk_buff * if (!list_empty(&ptype_all)) dev_queue_xmit_nit(skb, dev); @@ -102,7 +102,7 @@ if (rc == NETDEV_TX_OK) txq_trans_update(txq); return rc; -@@ -2594,9 +2604,19 @@ gso: +@@ -2599,9 +2609,19 @@ gso: if (!list_empty(&ptype_all)) dev_queue_xmit_nit(nskb, dev); @@ -127,7 +127,7 @@ goto out_kfree_gso_skb; --- a/net/core/skbuff.c +++ b/net/core/skbuff.c -@@ -60,6 +60,7 @@ +@@ -62,6 +62,7 @@ #include <linux/scatterlist.h> #include <linux/errqueue.h> #include <linux/prefetch.h> @@ -135,7 +135,7 @@ #include <net/protocol.h> #include <net/dst.h> -@@ -441,6 +442,22 @@ struct sk_buff *__netdev_alloc_skb(struc +@@ -443,6 +444,22 @@ struct sk_buff *__netdev_alloc_skb(struc } EXPORT_SYMBOL(__netdev_alloc_skb); diff --git a/target/linux/imx6/Makefile b/target/linux/imx6/Makefile index 688e355..b5a7ebe 100644 --- a/target/linux/imx6/Makefile +++ b/target/linux/imx6/Makefile @@ -14,7 +14,7 @@ CPU_TYPE:=cortex-a9 CPU_SUBTYPE:=neon MAINTAINER:=Luka Perkov <luka@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch b/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch index 5553101..fd90130 100644 --- a/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch +++ b/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch @@ -19,7 +19,7 @@ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c -@@ -1019,7 +1019,6 @@ static int flexcan_probe(struct platform +@@ -1021,7 +1021,6 @@ static int flexcan_probe(struct platform err = PTR_ERR(clk_ipg); goto failed_clock; } @@ -27,7 +27,7 @@ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(clk_per)) { -@@ -1027,6 +1026,7 @@ static int flexcan_probe(struct platform +@@ -1029,6 +1028,7 @@ static int flexcan_probe(struct platform err = PTR_ERR(clk_per); goto failed_clock; } diff --git a/target/linux/ixp4xx/Makefile b/target/linux/ixp4xx/Makefile index 9a7d509..c3cb734 100644 --- a/target/linux/ixp4xx/Makefile +++ b/target/linux/ixp4xx/Makefile @@ -13,7 +13,7 @@ FEATURES:=squashfs MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> SUBTARGETS=generic harddisk -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch b/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch index c46f516..c4356235 100644 --- a/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch +++ b/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch @@ -1,6 +1,6 @@ --- a/net/core/skbuff.c +++ b/net/core/skbuff.c -@@ -208,6 +208,9 @@ struct sk_buff *__alloc_skb(unsigned int +@@ -210,6 +210,9 @@ struct sk_buff *__alloc_skb(unsigned int if (sk_memalloc_socks() && (flags & SKB_ALLOC_RX)) gfp_mask |= __GFP_MEMALLOC; @@ -10,7 +10,7 @@ /* Get the HEAD */ skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node); -@@ -1052,6 +1055,10 @@ int pskb_expand_head(struct sk_buff *skb +@@ -1054,6 +1057,10 @@ int pskb_expand_head(struct sk_buff *skb if (skb_shared(skb)) BUG(); diff --git a/target/linux/kirkwood/Makefile b/target/linux/kirkwood/Makefile index d8090f2..d30d78b 100644 --- a/target/linux/kirkwood/Makefile +++ b/target/linux/kirkwood/Makefile @@ -13,7 +13,7 @@ FEATURES:=targz usb jffs2_nand ubifs CPU_TYPE:=xscale MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile index a67923c..5bdb937 100644 --- a/target/linux/lantiq/Makefile +++ b/target/linux/lantiq/Makefile @@ -11,7 +11,7 @@ BOARDNAME:=Lantiq GPON/XWAY/SVIP FEATURES:=squashfs SUBTARGETS=xway xrx200 ase falcon -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 CPU_TYPE:=mips32r2 diff --git a/target/linux/malta/Makefile b/target/linux/malta/Makefile index 2d4d160..21f8345 100644 --- a/target/linux/malta/Makefile +++ b/target/linux/malta/Makefile @@ -12,7 +12,7 @@ SUBTARGETS:=le be le64 be64 INITRAMFS_EXTRA_FILES:= MAINTAINER:=Florian Fainelli <florian@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 DEVICE_TYPE:=developerboard diff --git a/target/linux/mpc85xx/Makefile b/target/linux/mpc85xx/Makefile index da595cc..5755ff7 100644 --- a/target/linux/mpc85xx/Makefile +++ b/target/linux/mpc85xx/Makefile @@ -14,7 +14,7 @@ FEATURES:=spe_fpu squashfs MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> SUBTARGETS=generic p1020 -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/mvebu/Makefile b/target/linux/mvebu/Makefile index 18220a5..a1ade2f 100644 --- a/target/linux/mvebu/Makefile +++ b/target/linux/mvebu/Makefile @@ -14,7 +14,7 @@ CPU_TYPE:=cortex-a9 CPU_SUBTYPE:=vfpv3 MAINTAINER:=Luka Perkov <luka@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/octeon/Makefile b/target/linux/octeon/Makefile index 10849eb..ee54bfb 100644 --- a/target/linux/octeon/Makefile +++ b/target/linux/octeon/Makefile @@ -14,7 +14,7 @@ CPU_TYPE:=octeon CPU_CFLAGS_octeon:=-march=octeon MAINTAINER:=John Crispin <blogic@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/ppc40x/Makefile b/target/linux/ppc40x/Makefile index 5b6cdcf..4e75198 100644 --- a/target/linux/ppc40x/Makefile +++ b/target/linux/ppc40x/Makefile @@ -13,7 +13,7 @@ FEATURES:=squashfs CPU_TYPE:=405 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/ppc44x/Makefile b/target/linux/ppc44x/Makefile index 5c8ce98..30a85cf 100644 --- a/target/linux/ppc44x/Makefile +++ b/target/linux/ppc44x/Makefile @@ -13,7 +13,7 @@ FEATURES:=squashfs broken CPU_TYPE:=440 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile index a65646f..72e2524 100644 --- a/target/linux/ramips/Makefile +++ b/target/linux/ramips/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Ralink RT288x/RT3xxx SUBTARGETS:=rt305x mt7620a mt7620n mt7621 rt3883 rt288x FEATURES:=squashfs gpio -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES+=\ diff --git a/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch b/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch index dde4a35..d010f6f 100644 --- a/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch +++ b/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch @@ -11,11 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 193 insertions(+) create mode 100644 drivers/watchdog/mt7621_wdt.c -Index: linux-3.10.32/drivers/watchdog/Kconfig -=================================================================== ---- linux-3.10.32.orig/drivers/watchdog/Kconfig 2014-03-18 11:00:30.629639835 +0000 -+++ linux-3.10.32/drivers/watchdog/Kconfig 2014-03-18 11:02:35.141634769 +0000 -@@ -1120,6 +1120,13 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -1120,6 +1120,13 @@ config RALINK_WDT help Hardware driver for the Ralink SoC Watchdog Timer. @@ -29,11 +27,9 @@ Index: linux-3.10.32/drivers/watchdog/Kconfig # PARISC Architecture # POWERPC Architecture -Index: linux-3.10.32/drivers/watchdog/Makefile -=================================================================== ---- linux-3.10.32.orig/drivers/watchdog/Makefile 2014-03-18 11:00:30.629639835 +0000 -+++ linux-3.10.32/drivers/watchdog/Makefile 2014-03-18 11:00:31.317639807 +0000 -@@ -136,6 +136,7 @@ +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -136,6 +136,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o @@ -41,10 +37,8 @@ Index: linux-3.10.32/drivers/watchdog/Makefile # PARISC Architecture -Index: linux-3.10.32/drivers/watchdog/mt7621_wdt.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-3.10.32/drivers/watchdog/mt7621_wdt.c 2014-03-18 11:00:31.317639807 +0000 +--- /dev/null ++++ b/drivers/watchdog/mt7621_wdt.c @@ -0,0 +1,185 @@ +/* + * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer diff --git a/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch index 5a554fd..e0a0db8 100644 --- a/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch +++ b/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch @@ -12,11 +12,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 4 files changed, 194 insertions(+), 1 deletion(-) create mode 100644 drivers/gpio/gpio-mt7621.c -Index: linux-3.10.32/arch/mips/Kconfig -=================================================================== ---- linux-3.10.32.orig/arch/mips/Kconfig 2014-03-18 11:00:30.945639822 +0000 -+++ linux-3.10.32/arch/mips/Kconfig 2014-03-18 11:00:31.325639806 +0000 -@@ -448,7 +448,10 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -448,7 +448,10 @@ config RALINK select ARCH_REQUIRE_GPIOLIB select PINCTRL select PINCTRL_RT2880 @@ -28,11 +26,9 @@ Index: linux-3.10.32/arch/mips/Kconfig config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" select FW_ARC -Index: linux-3.10.32/drivers/gpio/Kconfig -=================================================================== ---- linux-3.10.32.orig/drivers/gpio/Kconfig 2014-03-18 11:00:30.653639834 +0000 -+++ linux-3.10.32/drivers/gpio/Kconfig 2014-03-18 11:02:01.901636126 +0000 -@@ -710,6 +710,12 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -710,6 +710,12 @@ config GPIO_MSIC Enable support for GPIO on intel MSIC controllers found in intel MID devices @@ -45,19 +41,15 @@ Index: linux-3.10.32/drivers/gpio/Kconfig comment "USB GPIO expanders:" config GPIO_VIPERBOARD -Index: linux-3.10.32/drivers/gpio/Makefile -=================================================================== ---- linux-3.10.32.orig/drivers/gpio/Makefile 2014-03-18 11:00:30.653639834 +0000 -+++ linux-3.10.32/drivers/gpio/Makefile 2014-03-18 11:00:31.325639806 +0000 -@@ -88,3 +88,4 @@ +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -88,3 +88,4 @@ obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o +obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o -Index: linux-3.10.32/drivers/gpio/gpio-mt7621.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-3.10.32/drivers/gpio/gpio-mt7621.c 2014-03-18 11:00:31.325639806 +0000 +--- /dev/null ++++ b/drivers/gpio/gpio-mt7621.c @@ -0,0 +1,183 @@ +/* + * This program is free software; you can redistribute it and/or modify it diff --git a/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch b/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch index 05d9548..3cadce7 100644 --- a/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch +++ b/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch @@ -1,7 +1,5 @@ -Index: linux-3.10.32/arch/mips/ralink/rt288x.c -=================================================================== ---- linux-3.10.32.orig/arch/mips/ralink/rt288x.c 2014-02-22 20:41:54.000000000 +0000 -+++ linux-3.10.32/arch/mips/ralink/rt288x.c 2014-03-18 11:18:06.689596876 +0000 +--- a/arch/mips/ralink/rt288x.c ++++ b/arch/mips/ralink/rt288x.c @@ -17,46 +17,27 @@ #include <asm/mipsregs.h> #include <asm/mach-ralink/ralink_regs.h> @@ -67,7 +65,7 @@ Index: linux-3.10.32/arch/mips/ralink/rt288x.c }; static void rt288x_wdt_reset(void) -@@ -69,11 +50,6 @@ +@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void) rt_sysc_w32(t, SYSC_REG_CLKCFG); } @@ -79,7 +77,7 @@ Index: linux-3.10.32/arch/mips/ralink/rt288x.c void __init ralink_clk_init(void) { unsigned long cpu_rate; -@@ -140,4 +116,6 @@ +@@ -140,4 +116,6 @@ void prom_soc_init(struct ralink_soc_inf soc_info->mem_base = RT2880_SDRAM_BASE; soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; diff --git a/target/linux/rb532/Makefile b/target/linux/rb532/Makefile index 0f67491..8276da5 100644 --- a/target/linux/rb532/Makefile +++ b/target/linux/rb532/Makefile @@ -11,7 +11,7 @@ BOARD:=rb532 BOARDNAME:=Mikrotik RouterBoard 532 FEATURES:=pci targz broken -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532 diff --git a/target/linux/realview/Makefile b/target/linux/realview/Makefile index 5fba218..8d98187 100644 --- a/target/linux/realview/Makefile +++ b/target/linux/realview/Makefile @@ -14,7 +14,7 @@ CPU_TYPE:=mpcore CPU_SUBTYPE:=vfp MAINTAINER:=Florian Fainelli <florian@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 DEVICE_TYPE:=developerboard diff --git a/target/linux/sparc/Makefile b/target/linux/sparc/Makefile index 3416428..a031f26 100644 --- a/target/linux/sparc/Makefile +++ b/target/linux/sparc/Makefile @@ -11,7 +11,7 @@ BOARD:=sparc BOARDNAME:=Sun UltraSPARC FEATURES+=fpu tgz ext4 squashfs broken -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/x86/alix2/target.mk b/target/linux/x86/alix2/target.mk index a2118d0..df39317 100644 --- a/target/linux/x86/alix2/target.mk +++ b/target/linux/x86/alix2/target.mk @@ -19,7 +19,7 @@ DEFAULT_PACKAGES += \ kmod-ledtrig-heartbeat kmod-ledtrig-gpio \ kmod-ledtrig-netdev \ kmod-cpu-msr hwclock wpad -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 CS5535_MASK:=0x0b000042 CPU_TYPE := geode diff --git a/target/linux/x86/generic/target.mk b/target/linux/x86/generic/target.mk index 95c1714..c6222e5 100644 --- a/target/linux/x86/generic/target.mk +++ b/target/linux/x86/generic/target.mk @@ -1,6 +1,6 @@ BOARDNAME:=Generic -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 define Target/Description Build firmware images for x86 based boards diff --git a/target/linux/x86/geos/target.mk b/target/linux/x86/geos/target.mk index c46acdb..9fb5807 100644 --- a/target/linux/x86/geos/target.mk +++ b/target/linux/x86/geos/target.mk @@ -21,7 +21,7 @@ DEFAULT_PACKAGES += \ kmod-cpu-msr \ soloscli linux-atm br2684ctl ppp-mod-pppoa pppdump pppstats \ hwclock wpad flashrom tc -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 CS5535_MASK:=0x0E000048 CPU_TYPE := geode diff --git a/target/linux/x86/kvm_guest/target.mk b/target/linux/x86/kvm_guest/target.mk index eb670c8..1681a1e 100644 --- a/target/linux/x86/kvm_guest/target.mk +++ b/target/linux/x86/kvm_guest/target.mk @@ -2,4 +2,4 @@ BOARDNAME:=KVM Guest FEATURES:=ext4 pci usb DEFAULT_PACKAGES += kmod-virtio-balloon kmod-virtio-net kmod-virtio-random -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 diff --git a/target/linux/x86/net5501/target.mk b/target/linux/x86/net5501/target.mk index b231e7e..9c69f5d 100644 --- a/target/linux/x86/net5501/target.mk +++ b/target/linux/x86/net5501/target.mk @@ -23,7 +23,7 @@ DEFAULT_PACKAGES += kmod-crypto-hw-geode kmod-crypto-ocf \ CS5535_MASK:=0x01000040 CPU_TYPE := geode -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 FEATURES += broken define Target/Description diff --git a/target/linux/x86/olpc/target.mk b/target/linux/x86/olpc/target.mk index a549117..8ea5f59 100644 --- a/target/linux/x86/olpc/target.mk +++ b/target/linux/x86/olpc/target.mk @@ -1,4 +1,4 @@ BOARDNAME:=OLPC XO-1 DEFAULT_PACKAGES += kmod-natsemi kmod-ne2k-pci kmod-libertas -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 FEATURES += broken diff --git a/target/linux/x86/rdc/target.mk b/target/linux/x86/rdc/target.mk index 3f9b417..dd3edf3 100644 --- a/target/linux/x86/rdc/target.mk +++ b/target/linux/x86/rdc/target.mk @@ -1,7 +1,7 @@ BOARDNAME:=RDC R-321x FEATURES:=squashfs pci usb gpio pcmcia MAINTAINER:=Florian Fainelli <florian@openwrt.org> -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 FEATURES += broken DEFAULT_PACKAGES += kmod-llc kmod-stp kmod-bridge kmod-8021q \ diff --git a/target/linux/x86/thincan/target.mk b/target/linux/x86/thincan/target.mk index c0d3b1c..72f795f 100644 --- a/target/linux/x86/thincan/target.mk +++ b/target/linux/x86/thincan/target.mk @@ -1,6 +1,6 @@ DEVICE_TYPE:=terminal BOARDNAME:=Artec ThinCan -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 CPU_TYPE := geode FEATURES += broken diff --git a/target/linux/x86/xen_domu/target.mk b/target/linux/x86/xen_domu/target.mk index 109cff0..294360f 100644 --- a/target/linux/x86/xen_domu/target.mk +++ b/target/linux/x86/xen_domu/target.mk @@ -1,4 +1,4 @@ BOARDNAME:=Xen Paravirt Guest DEFAULT_PACKAGES += kmod-xen-fs kmod-xen-evtchn kmod-xen-netdev kmod-xen-kbddev FEATURES:=display broken -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 diff --git a/target/linux/xburst/Makefile b/target/linux/xburst/Makefile index 5fb7a84..8157f45 100644 --- a/target/linux/xburst/Makefile +++ b/target/linux/xburst/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Ingenic XBurst FEATURES:=targz ubifs audio SUBTARGETS:=qi_lb60 n516 n526 id800wt -LINUX_VERSION:=3.10.32 +LINUX_VERSION:=3.10.34 DEVICE_TYPE=other |