summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/linux/sunxi/config-3.122
-rw-r--r--target/linux/sunxi/patches-3.12/136-clksrc-add-hstimer.patch297
-rw-r--r--target/linux/sunxi/patches-3.12/137-1-dt-sun7i-add-hstimer.patch48
-rw-r--r--target/linux/sunxi/patches-3.12/137-2-dt-sun5i-add-hstimer.patch38
-rw-r--r--target/linux/sunxi/patches-3.12/137-3-dt-sun5i-a10s-add-hstimer.patch38
-rw-r--r--target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch6
6 files changed, 425 insertions, 4 deletions
diff --git a/target/linux/sunxi/config-3.12 b/target/linux/sunxi/config-3.12
index 3a59082..b57168b 100644
--- a/target/linux/sunxi/config-3.12
+++ b/target/linux/sunxi/config-3.12
@@ -235,7 +235,6 @@ CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_KSM=y
CONFIG_KTIME_SCALAR=y
-# CONFIG_LBDAF is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEGACY_PTYS=y
@@ -359,6 +358,7 @@ CONFIG_STOP_MACHINE=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_SUN4I_EMAC is not set
CONFIG_SUN4I_TIMER=y
+CONFIG_SUN5I_HSTIMER=y
# CONFIG_SUNXI_WATCHDOG is not set
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
diff --git a/target/linux/sunxi/patches-3.12/136-clksrc-add-hstimer.patch b/target/linux/sunxi/patches-3.12/136-clksrc-add-hstimer.patch
new file mode 100644
index 0000000..db54eb8
--- /dev/null
+++ b/target/linux/sunxi/patches-3.12/136-clksrc-add-hstimer.patch
@@ -0,0 +1,297 @@
+From 3bf30f6381f9287eb99ce096bf2fa327a69c8a71 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Thu, 7 Nov 2013 12:01:48 +0100
+Subject: [PATCH] clocksource: Add Allwinner SoCs HS timers driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Most of the Allwinner SoCs (at this time, all but the A10) also have a
+High Speed timers that are not using the 24MHz oscillator as a source
+but rather the AHB clock running much faster.
+
+The IP is slightly different between the A10s/A13 and the one used in
+the A20/A31, since the latter have 4 timers available, while the former
+have only 2 of them.
+
+[dlezcano] : Fixed conflict with b788beda "Order Kconfig options
+ alphabetically"
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Tested-by: Emilio López <emilio@elopez.com.ar>
+Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
+---
+ .../bindings/timer/allwinner,sun5i-a13-hstimer.txt | 22 +++
+ arch/arm/mach-sunxi/Kconfig | 1 +
+ drivers/clocksource/Kconfig | 4 +
+ drivers/clocksource/Makefile | 1 +
+ drivers/clocksource/timer-sun5i.c | 192 +++++++++++++++++++++
+ 5 files changed, 220 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+ create mode 100644 drivers/clocksource/timer-sun5i.c
+
+diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+new file mode 100644
+index 0000000..7c26154
+--- /dev/null
++++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+@@ -0,0 +1,22 @@
++Allwinner SoCs High Speed Timer Controller
++
++Required properties:
++
++- compatible : should be "allwinner,sun5i-a13-hstimer" or
++ "allwinner,sun7i-a20-hstimer"
++- reg : Specifies base physical address and size of the registers.
++- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i
++ one)
++- clocks: phandle to the source clock (usually the AHB clock)
++
++Example:
++
++timer@01c60000 {
++ compatible = "allwinner,sun7i-a20-hstimer";
++ reg = <0x01c60000 0x1000>;
++ interrupts = <0 51 1>,
++ <0 52 1>,
++ <0 53 1>,
++ <0 54 1>;
++ clocks = <&ahb1_gates 19>;
++};
+diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
+index e3457b9..547004c 100644
+--- a/arch/arm/mach-sunxi/Kconfig
++++ b/arch/arm/mach-sunxi/Kconfig
+@@ -13,3 +13,4 @@ config ARCH_SUNXI
+ select PINCTRL_SUNXI
+ select SPARSE_IRQ
+ select SUN4I_TIMER
++ select SUN5I_HSTIMER
+diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
+index 634c4d6..cd6950f 100644
+--- a/drivers/clocksource/Kconfig
++++ b/drivers/clocksource/Kconfig
+@@ -37,6 +37,10 @@ config SUN4I_TIMER
+ select CLKSRC_MMIO
+ bool
+
++config SUN5I_HSTIMER
++ select CLKSRC_MMIO
++ bool
++
+ config VT8500_TIMER
+ bool
+
+diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
+index 33621ef..358358d 100644
+--- a/drivers/clocksource/Makefile
++++ b/drivers/clocksource/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
+ obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
+ obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
+ obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
++obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
+ obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
+ obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
+ obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
+diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
+new file mode 100644
+index 0000000..bddc522
+--- /dev/null
++++ b/drivers/clocksource/timer-sun5i.c
+@@ -0,0 +1,192 @@
++/*
++ * Allwinner SoCs hstimer driver.
++ *
++ * Copyright (C) 2013 Maxime Ripard
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/clk.h>
++#include <linux/clockchips.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/irqreturn.h>
++#include <linux/sched_clock.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++
++#define TIMER_IRQ_EN_REG 0x00
++#define TIMER_IRQ_EN(val) BIT(val)
++#define TIMER_IRQ_ST_REG 0x04
++#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10)
++#define TIMER_CTL_ENABLE BIT(0)
++#define TIMER_CTL_RELOAD BIT(1)
++#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
++#define TIMER_CTL_ONESHOT BIT(7)
++#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14)
++#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18)
++#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c)
++#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20)
++
++#define TIMER_SYNC_TICKS 3
++
++static void __iomem *timer_base;
++static u32 ticks_per_jiffy;
++
++/*
++ * When we disable a timer, we need to wait at least for 2 cycles of
++ * the timer source clock. We will use for that the clocksource timer
++ * that is already setup and runs at the same frequency than the other
++ * timers, and we never will be disabled.
++ */
++static void sun5i_clkevt_sync(void)
++{
++ u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1));
++
++ while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
++ cpu_relax();
++}
++
++static void sun5i_clkevt_time_stop(u8 timer)
++{
++ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
++ writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
++
++ sun5i_clkevt_sync();
++}
++
++static void sun5i_clkevt_time_setup(u8 timer, u32 delay)
++{
++ writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer));
++}
++
++static void sun5i_clkevt_time_start(u8 timer, bool periodic)
++{
++ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
++
++ if (periodic)
++ val &= ~TIMER_CTL_ONESHOT;
++ else
++ val |= TIMER_CTL_ONESHOT;
++
++ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
++ timer_base + TIMER_CTL_REG(timer));
++}
++
++static void sun5i_clkevt_mode(enum clock_event_mode mode,
++ struct clock_event_device *clk)
++{
++ switch (mode) {
++ case CLOCK_EVT_MODE_PERIODIC:
++ sun5i_clkevt_time_stop(0);
++ sun5i_clkevt_time_setup(0, ticks_per_jiffy);
++ sun5i_clkevt_time_start(0, true);
++ break;
++ case CLOCK_EVT_MODE_ONESHOT:
++ sun5i_clkevt_time_stop(0);
++ sun5i_clkevt_time_start(0, false);
++ break;
++ case CLOCK_EVT_MODE_UNUSED:
++ case CLOCK_EVT_MODE_SHUTDOWN:
++ default:
++ sun5i_clkevt_time_stop(0);
++ break;
++ }
++}
++
++static int sun5i_clkevt_next_event(unsigned long evt,
++ struct clock_event_device *unused)
++{
++ sun5i_clkevt_time_stop(0);
++ sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS);
++ sun5i_clkevt_time_start(0, false);
++
++ return 0;
++}
++
++static struct clock_event_device sun5i_clockevent = {
++ .name = "sun5i_tick",
++ .rating = 340,
++ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
++ .set_mode = sun5i_clkevt_mode,
++ .set_next_event = sun5i_clkevt_next_event,
++};
++
++
++static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
++{
++ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
++
++ writel(0x1, timer_base + TIMER_IRQ_ST_REG);
++ evt->event_handler(evt);
++
++ return IRQ_HANDLED;
++}
++
++static struct irqaction sun5i_timer_irq = {
++ .name = "sun5i_timer0",
++ .flags = IRQF_TIMER | IRQF_IRQPOLL,
++ .handler = sun5i_timer_interrupt,
++ .dev_id = &sun5i_clockevent,
++};
++
++static u32 sun5i_timer_sched_read(void)
++{
++ return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1));
++}
++
++static void __init sun5i_timer_init(struct device_node *node)
++{
++ unsigned long rate;
++ struct clk *clk;
++ int ret, irq;
++ u32 val;
++
++ timer_base = of_iomap(node, 0);
++ if (!timer_base)
++ panic("Can't map registers");
++
++ irq = irq_of_parse_and_map(node, 0);
++ if (irq <= 0)
++ panic("Can't parse IRQ");
++
++ clk = of_clk_get(node, 0);
++ if (IS_ERR(clk))
++ panic("Can't get timer clock");
++ clk_prepare_enable(clk);
++ rate = clk_get_rate(clk);
++
++ writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
++ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
++ timer_base + TIMER_CTL_REG(1));
++
++ setup_sched_clock(sun5i_timer_sched_read, 32, rate);
++ clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name,
++ rate, 340, 32, clocksource_mmio_readl_down);
++
++ ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
++
++ ret = setup_irq(irq, &sun5i_timer_irq);
++ if (ret)
++ pr_warn("failed to setup irq %d\n", irq);
++
++ /* Enable timer0 interrupt */
++ val = readl(timer_base + TIMER_IRQ_EN_REG);
++ writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
++
++ sun5i_clockevent.cpumask = cpu_possible_mask;
++ sun5i_clockevent.irq = irq;
++
++ clockevents_config_and_register(&sun5i_clockevent, rate,
++ TIMER_SYNC_TICKS, 0xffffffff);
++}
++CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
++ sun5i_timer_init);
++CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer",
++ sun5i_timer_init);
+--
+1.8.5.1
+
diff --git a/target/linux/sunxi/patches-3.12/137-1-dt-sun7i-add-hstimer.patch b/target/linux/sunxi/patches-3.12/137-1-dt-sun7i-add-hstimer.patch
new file mode 100644
index 0000000..7112ff0
--- /dev/null
+++ b/target/linux/sunxi/patches-3.12/137-1-dt-sun7i-add-hstimer.patch
@@ -0,0 +1,48 @@
+From 6c23e1fa6bd220b8f5665c150c83d4c016d95482 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Thu, 7 Nov 2013 12:01:48 +0100
+Subject: [PATCH] ARM: sun7i: a20: Add support for the High Speed Timers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The Allwinner A20 has support for four high speed timers. Apart for the
+number of timers (4 vs 2), it's basically the same logic than the high
+speed timers found in the sun5i chips.
+
+Now that we have a driver to support it, we can enable them in the
+device tree.
+
+[dlezcano] : Fixed conflict with 428abbb8 "Enable the I2C controllers"
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Tested-by: Emilio López <emilio@elopez.com.ar>
+Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
+---
+ arch/arm/boot/dts/sun7i-a20.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
+index 93f7f96..c74147a 100644
+--- a/arch/arm/boot/dts/sun7i-a20.dtsi
++++ b/arch/arm/boot/dts/sun7i-a20.dtsi
+@@ -405,6 +405,16 @@
+ status = "disabled";
+ };
+
++ hstimer@01c60000 {
++ compatible = "allwinner,sun7i-a20-hstimer";
++ reg = <0x01c60000 0x1000>;
++ interrupts = <0 81 1>,
++ <0 82 1>,
++ <0 83 1>,
++ <0 84 1>;
++ clocks = <&ahb_gates 28>;
++ };
++
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+--
+1.8.5.1
+
diff --git a/target/linux/sunxi/patches-3.12/137-2-dt-sun5i-add-hstimer.patch b/target/linux/sunxi/patches-3.12/137-2-dt-sun5i-add-hstimer.patch
new file mode 100644
index 0000000..b209b12
--- /dev/null
+++ b/target/linux/sunxi/patches-3.12/137-2-dt-sun5i-add-hstimer.patch
@@ -0,0 +1,38 @@
+From 22a3eff19679e0e592e061201690670a2f5fdba7 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Thu, 7 Nov 2013 12:01:48 +0100
+Subject: [PATCH] ARM: sun5i: a13: Add support for the High Speed Timers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The Allwinner A13 has support for two high speed timers. Now that we
+have a driver to support it, we can enable them in the device tree.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Tested-by: Emilio López <emilio@elopez.com.ar>
+Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
+---
+ arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
+index ce8ef2a..1ccd75d 100644
+--- a/arch/arm/boot/dts/sun5i-a13.dtsi
++++ b/arch/arm/boot/dts/sun5i-a13.dtsi
+@@ -273,5 +273,12 @@
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
++
++ timer@01c60000 {
++ compatible = "allwinner,sun5i-a13-hstimer";
++ reg = <0x01c60000 0x1000>;
++ interrupts = <82>, <83>;
++ clocks = <&ahb_gates 28>;
++ };
+ };
+ };
+--
+1.8.5.1
+
diff --git a/target/linux/sunxi/patches-3.12/137-3-dt-sun5i-a10s-add-hstimer.patch b/target/linux/sunxi/patches-3.12/137-3-dt-sun5i-a10s-add-hstimer.patch
new file mode 100644
index 0000000..afdaa5a
--- /dev/null
+++ b/target/linux/sunxi/patches-3.12/137-3-dt-sun5i-a10s-add-hstimer.patch
@@ -0,0 +1,38 @@
+From 5ace5467690055b1772dcac69dd1377735b8a34b Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Thu, 7 Nov 2013 12:01:48 +0100
+Subject: [PATCH] ARM: sun5i: a10s: Add support for the High Speed Timers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The Allwinner A10s has support for two high speed timers. Now that we
+have a driver to support it, we can enable them in the device tree.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Tested-by: Emilio López <emilio@elopez.com.ar>
+Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
+---
+ arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
+index b4764be..924a2c1 100644
+--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
++++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
+@@ -336,5 +336,12 @@
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
++
++ timer@01c60000 {
++ compatible = "allwinner,sun5i-a13-hstimer";
++ reg = <0x01c60000 0x1000>;
++ interrupts = <82>, <83>;
++ clocks = <&ahb_gates 28>;
++ };
+ };
+ };
+--
+1.8.5.1
+
diff --git a/target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch b/target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch
index 2e80601..0f72598 100644
--- a/target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch
+++ b/target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch
@@ -23,9 +23,9 @@ index aad270c..a271a2d 100644
#address-cells = <1>;
#size-cells = <0>;
@@ -310,5 +314,22 @@
- clock-frequency = <100000>;
- status = "disabled";
- };
+ interrupts = <82>, <83>;
+ clocks = <&ahb_gates 28>;
+ };
+
+ usb_rst: reset@0x01c200cc {
+ #reset-cells = <1>;