diff options
23 files changed, 1880 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/base-files.mk b/target/linux/brcm47xx/base-files.mk new file mode 100644 index 0000000..d6682bd --- /dev/null +++ b/target/linux/brcm47xx/base-files.mk @@ -0,0 +1,5 @@ +define Package/base-files/install-target + rm -f $(1)/etc/config/network +endef + + diff --git a/target/linux/brcm47xx/base-files/etc/diag.sh b/target/linux/brcm47xx/base-files/etc/diag.sh new file mode 100644 index 0000000..3b08554 --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/diag.sh @@ -0,0 +1,28 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +set_led() { + local led="$1" + local state="$2" + [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1" +} + +set_state() { + case "$1" in + preinit) + set_led dmz 1 + set_led diag 1 + set_led power 0 + ;; + failsafe) + set_led diag f + set_led power f + set_led dmz f + ;; + done) + set_led dmz 0 + set_led diag 0 + set_led power 1 + ;; + esac +} diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig new file mode 100755 index 0000000..d7839b6 --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig @@ -0,0 +1,248 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006 OpenWrt.org + +START=05 + +start() { + [ -e /etc/config/network ] && { + local batch + + config_cb() { + case "$1" in + switch) + option_cb() { + case "$1" in + vlan[0-9]|vlan1[0-5]) + local id="${1#vlan}" + local ports="${2%\*}" + append batch "delete network.eth0.${1}${N}" + append batch "set network.eth0_${id}=switch_vlan${N}" + append batch "set network.eth0_${id}.device=eth0${N}" + append batch "set network.eth0_${id}.vlan=${id}${N}" + append batch "set network.eth0_${id}.ports='${ports}'${N}" + ;; + esac + } + ;; + switch_vlan) + option_cb() { :; } + batch="" + ;; + esac + } + + config_load network + + [ -n "$batch" ] && { + logger -t netconfig "migrating switch config to new format ..." + echo "$batch${N}commit network" | uci batch + } + + exit 0 + } + + mkdir -p /etc/config + + ( + if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then + # WGT634u + echo boardtype=wgt634u + else + strings "$(find_mtd_part nvram)" + fi + ) | awk ' + function p(cfgname, name) { + if (c[name] != "") print " option " cfgname " \"" c[name] "\"" + } + + function vlan(id, name) { + if (c[name] != "") { + print "config switch_vlan eth0_" id + print " option device \"eth0\"" + print " option vlan " id + print " option ports \"" c[name] "\"" + print "" + } + } + + function macinc(mac, maca, i, result) { + split(mac, maca, ":") + for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] + if (++maca[6] > 0xff) { + maca[5]++ + maca[6] = 0 + } + for (i = 1; i <= 6; i++) { + if (i != 1) result = result ":" + result = result sprintf("%02x", maca[i]) + } + return result + } + + BEGIN { + FS="=" + c["lan_ifname"]="eth0.0" + c["wan_ifname"]="eth0.1" + c["vlan0ports"]="1 2 3 4 5" + c["vlan1ports"]="0 5" + getline < "/proc/diag/model" + model=$0 + for (i = 0; i < 6; i++) { + if (mac_check != "") mac_check = mac_check ":" + mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" + } + } + + ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { + nvram[$1] = $2 + } + + END { + if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { + c["wan_ifname"] = "" + c["lan_ifname"] = "eth1" + } + if (model == "ASUS WL-330gE") { + c["wan_ifname"] = "" + c["lan_ifname"] = "eth0" + c["vlan0ports"] = "" + c["vlan1ports"] = "" + } + if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) { + c["wan_ifname"] = "eth1" + c["lan_ifname"] = "eth0" + } + if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) { + c["vlan0ports"] = "0 1 2 3 5" + c["vlan1ports"] = "4 5" + } + if (model == "Dell TrueMobile 2300") { + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + } + if (nvram["boardtype"] == "bcm94710r4") { + # Toshiba WRC-1000 + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + } + if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) { + c["vlan0ports"] = "0 1 2 3 5" + c["vlan1ports"] = "4 5" + } + if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { + if (nvram["boardnum"] == "45") { + # WL-500gP + c["vlan0ports"] = "1 2 3 4 5" + c["vlan1ports"] = "0 5" + } else { + # Generic BCM94704 + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + + # MAC addresses on 4704 tend to be screwed up. Add a workaround here + if (nvram["et0macaddr"] ~ mac_check) { + c["lan_macaddr"] = nvram["et0macaddr"] + c["wan_macaddr"] = macinc(c["lan_macaddr"]) + } + } + } + # Buffalo WBR-B11 and Buffalo WBR-G54 + if (nvram["boardtype"] == "bcm94710ap") { + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + } + # generic broadcom 4705/4785 processor with 5397 switch? + # EXCEPT Linksys WRT300N V1.1 + if ((nvram["boardtype"] == "0x478") && \ + (model != "Linksys WRT300N V1.1")) { + c["vlan0ports"] = "1 2 3 4 8*" + c["vlan1ports"] = "0 8" + } + + # WAP54G + if ((nvram["boardnum"] == "2") || \ + (nvram["boardnum"] == "1024")) { + c["lan_ifname"]="eth0" + c["wan_ifname"]="" + } + + # Sitecom WL-105b + if ((nvram["boardum"] == "2") && \ + (nvram["GemtekPmonVer"] == "1")) { + c["lan_ifname"]="eth0" + c["wan_ifname"]="" + } + + # ASUS WL-700gE + # These are actually same as defaults above. For some reason this script applies + # Generic BCM94704 settings instead so we revert to proper settings here. + # Hopefully someone will fix this properly soon. + if (model == "ASUS WL-700gE") { + c["lan_ifname"]="eth0.0" + c["wan_ifname"]="eth0.1" + c["vlan0ports"]="1 2 3 4 5" + c["vlan1ports"]="0 5" + } + + if (model == "Motorola WR850G V2/V3") { + c["vlan0ports"]="0 1 2 3 5" + c["vlan1ports"]="4 5" + } + if (model == "ASUS WL-500W") { + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + } + if (model == "OvisLink WL-1600GL") { + c["lan_ifname"] = "eth0.0" + c["wan_ifname"] = "eth0.1" + c["vlan0ports"] = "0 1 2 3 5" + c["vlan1ports"] = "4 5" + } + + if (c["vlan0ports"] || c["vlan1ports"]) { + print "#### VLAN configuration " + print "config switch eth0" + print " option enable 1" + print "" + vlan(0, "vlan0ports") + vlan(1, "vlan1ports") + } + print "#### Loopback configuration" + print "config interface loopback" + print " option ifname \"lo\"" + print " option proto static" + print " option ipaddr 127.0.0.1" + print " option netmask 255.0.0.0" + print "" + print "" + print "#### LAN configuration" + print "config interface lan" + print " option type bridge" + p("ifname", "lan_ifname") + p("macaddr", "lan_macaddr") + print " option proto static" + print " option ipaddr 192.168.1.1" + print " option netmask 255.255.255.0" + print "" + print "" + if (c["wan_ifname"]) { + print "#### WAN configuration" + print "config interface wan" + p("ifname", "wan_ifname") + p("macaddr", "wan_macaddr") + print " option proto dhcp" + } else { + print "#### WAN configuration (disabled)" + print "#config interface wan" + print "# option proto dhcp" + } + }' > /etc/config/network +} diff --git a/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup new file mode 100755 index 0000000..ee1b752 --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup @@ -0,0 +1,33 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2010 OpenWrt.org + +START=41 + +boot() { + [ -d /sys/class/ieee80211 ] || exit + + commit=0 + + fixup_wmac() { + local cfg="$1" + local cfmac + + config_get cfmac "$cfg" macaddr + + [ "$cfmac" != "00:90:4c:5f:00:2a" ] || { + local nvmac="$(nvram get il0macaddr 2>/dev/null)" + [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && { + uci set wireless.$cfg.macaddr="$nvmac" + commit=1 + } + } + } + + config_load wireless + config_foreach fixup_wmac wifi-device + + [ "$commit" = 1 ] && uci commit wireless +} + +start() { :; } +stop() { :; } diff --git a/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm b/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm new file mode 100644 index 0000000..b0f4a4e --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm @@ -0,0 +1,9 @@ +#!/bin/sh + +init_hotplug_failsafe() { + echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug +} + +boot_hook_add preinit_main init_hotplug_failsafe + + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm new file mode 100644 index 0000000..3cd760e --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm @@ -0,0 +1,37 @@ +#!/bin/sh + +set_preinit_iface() { + ifname=eth0 + + insmod diag + + # hardware specific overrides + case "$(cat /proc/diag/model)" in + "Linksys WAP54G V1") ifname=eth1;; + "ASUS WL-HDD") ifname=eth1;; + "ASUS WL-300g") ifname=eth1;; + "ASUS (unknown, BCM4702)") ifname=eth1;; + "Sitecom WL-105b") ifname=eth1;; + esac + ifconfig $ifname 0.0.0.0 up +} + +check_module () { + module="$1"; shift; params="$*" + + insmod "$module" "$params" + sleep 1 + grep "^$module" /proc/modules + return $? +} + +init_iface() { + check_module tg3 + insmod switch-core + check_module switch-robo || check_module switch-adm || { + check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*" + } || rmmod switch-core +} + +boot_hook_add preinit_main set_preinit_iface +boot_hook_add preinit_main init_iface diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm new file mode 100644 index 0000000..a93559f --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm @@ -0,0 +1,15 @@ +#!/bin/sh + +failsafe_ip() { + [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && { + ifconfig eth0 0.0.0.0 down + echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + } + + [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { + ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up + } +} + +boot_hook_add failsafe failsafe_ip + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm new file mode 100644 index 0000000..fd5add1 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm @@ -0,0 +1,6 @@ +#!/bin/sh + +do_mount_procfs() { + mount none /proc -t proc +} + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm new file mode 100644 index 0000000..fdc7c71 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm @@ -0,0 +1,39 @@ +#!/bin/sh + +port_net_echo() { + [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { + if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then + netmsg $pi_broadcast "$1" + fi + } +} + +preinit_ip_deconfig() { + if [ -z "$pi_ifname" ]; then + ifconfig $ifname 0.0.0.0 down + else + grep -q "$pi_ifname" /proc/net/dev && { + ifconfig $pi_ifname 0.0.0.0 down + } + fi +} + +preinit_net_echo() { + preinit_ip + + [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && { + echo 1 > /proc/switch/eth0/reset + + # this would be easier if we blasted the message across all ports + # but we don't want packets leaking across interfaces + for port in $(seq 0 4); do { + echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + port_net_echo $1 + }; done + + echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + + } || port_net_echo $1 +} + + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm new file mode 100644 index 0000000..f030cb2 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm @@ -0,0 +1,12 @@ +#!/bin/sh + +indicate_failsafe() { + preinit_net_echo() { + port_net_echo $1 + } + echo "- failsafe -" + preinit_net_echo "Entering Failsafe!\n" + indicate_failsafe_led +} + + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm new file mode 100644 index 0000000..da721b8 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm @@ -0,0 +1,14 @@ +#!/bin/sh + +. /etc/functions.sh + +set_boot_wait() { + [ -x "/usr/sbin/nvram" ] && { + [ "$(nvram get boot_wait)" != "on" ] && { + nvram set boot_wait=on + nvram commit + } + } +} + +boot_hook_add failsafe set_boot_wait diff --git a/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh b/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000..9921cf5 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh @@ -0,0 +1,16 @@ +PART_NAME=linux + +platform_check_image() { + [ "$ARGC" -gt 1 ] && return 1 + + case "$(get_magic_word "$1")" in + # .trx files + 4844) return 0;; + *) + echo "Invalid image type. Please use only .trx files" + return 1 + ;; + esac +} + +# use default for platform_do_upgrade() diff --git a/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe b/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe new file mode 100755 index 0000000..0544339 --- /dev/null +++ b/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe @@ -0,0 +1,4 @@ +#!/bin/sh +case "$1" in + button) kill -USR1 1;; +esac diff --git a/target/linux/brcm47xx/image/Makefile b/target/linux/brcm47xx/image/Makefile new file mode 100644 index 0000000..b839a42 --- /dev/null +++ b/target/linux/brcm47xx/image/Makefile @@ -0,0 +1,110 @@ +# +# Copyright (C) 2006-2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Build/Clean + $(MAKE) -C lzma-loader clean +endef + +define Image/Prepare + cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma + rm -f $(KDIR)/loader.gz + $(MAKE) -C lzma-loader \ + BUILD_DIR="$(KDIR)" \ + TARGET="$(KDIR)" \ + clean install + echo -ne "\\x00" >> $(KDIR)/loader.gz + rm -f $(KDIR)/fs_mark + touch $(KDIR)/fs_mark + $(call prepare_generic_squashfs,$(KDIR)/fs_mark) +endef + +ifneq ($(KERNEL),2.4) + define Image/Build/wgt634u + dd if=$(KDIR)/loader.elf of=$(BIN_DIR)/openwrt-wgt634u-$(2).bin bs=131072 conv=sync + cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx >> $(BIN_DIR)/openwrt-wgt634u-$(2).bin + endef +endif + +define Image/Build/CyberTAN + $(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6)) +endef +define Image/Build/CyberTAN2 + $(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin -o $(BIN_DIR)/openwrt-$(2)-$(5)-factory.bin $(if $(6),-s $(6)) +endef +define Image/Build/CyberTANHead + $(STAGING_DIR_HOST)/bin/addpattern -5 -p $(3) -v v$(4) -i /dev/null -o $(KDIR)/openwrt-$(2)-header.bin $(if $(6),-s $(6)) +endef + +define Image/Build/Motorola + $(STAGING_DIR_HOST)/bin/motorola-bin -$(3) $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(4).bin +endef + +define Image/Build/USR + $(STAGING_DIR_HOST)/bin/trx2usr $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin +endef + +define trxalign/jffs2-128k +-a 0x20000 -f $(KDIR)/root.$(1) +endef +define trxalign/jffs2-64k +-a 0x10000 -f $(KDIR)/root.$(1) +endef +define trxalign/squashfs +-a 1024 -f $(KDIR)/root.$(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark +endef + +define Image/Build/trxV2 + $(call Image/Build/CyberTANHead,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6))) + $(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin \ + -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \ + $(call trxalign/$(1),$(1),$(KDIR)/openwrt-$(2)-header.bin) + $(call Image/Build/CyberTAN2,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6))) +endef + +define Image/Build/jffs2-128k + $(call Image/Build/CyberTAN,$(1),wrt54gs,W54S,4.80.1,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/CyberTAN,$(1),wrtsl54gs,W54U,2.08.1,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/trxV2,$(1),wrt54g3gv2-vf,3G2V,3.00.24,$(patsubst jffs2-%,jffs2,$(1)),6) + ifeq ($(KERNEL),2.6) + $(call Image/Build/wgt634u,$(1),$(patsubst jffs2-%,jffs2,$(1))) + endif +endef + +define Image/Build/jffs2-64k + $(call Image/Build/CyberTAN,$(1),wrt54g3g,W54F,2.20.1,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/CyberTAN,$(1),wrt54g3g-em,W3GN,2.20.1,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/CyberTAN,$(1),wrt54g,W54G,4.71.1,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/CyberTAN,$(1),wrt54gs_v4,W54s,1.09.1,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/CyberTAN,$(1),wrt150n,N150,1.51.3,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/CyberTAN,$(1),wrt300n_v1,EWCB,1.03.6,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/CyberTAN,$(1),wrt300n_v11,EWC2,1.51.2,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/CyberTAN,$(1),wrt350n_v1,EWCG,1.04.1,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1))) +endef + +define Image/Build/squashfs + $(call Image/Build/jffs2-64k,$(1)) + $(call Image/Build/jffs2-128k,$(1)) +endef + +define Image/Build/Initramfs + $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma +endef + +define Image/Build + $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx \ + -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \ + $(call trxalign/$(1),$(1)) + $(call Image/Build/$(1),$(1)) + $(call Image/Build/Motorola,$(1),wr850g,1,$(1)) + $(call Image/Build/USR,$(1),usr5461,$(1)) +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/brcm47xx/image/lzma-loader/Makefile b/target/linux/brcm47xx/image/lzma-loader/Makefile new file mode 100644 index 0000000..5dd6f50 --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/Makefile @@ -0,0 +1,33 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME := lzma-loader +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) + +$(PKG_BUILD_DIR)/.prepared: + mkdir $(PKG_BUILD_DIR) + $(CP) ./src/* $(PKG_BUILD_DIR)/ + touch $@ + +$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared + $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \ + LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)" + +download: +prepare: $(PKG_BUILD_DIR)/.prepared +compile: $(PKG_BUILD_DIR)/loader.gz +install: + +ifneq ($(TARGET),) +install: compile + $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/ +endif + +clean: + rm -rf $(PKG_BUILD_DIR) diff --git a/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.c b/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.c new file mode 100644 index 0000000..951700b --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.c @@ -0,0 +1,663 @@ +/* + LzmaDecode.c + LZMA Decoder + + LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#include "LzmaDecode.h" + +#ifndef Byte +#define Byte unsigned char +#endif + +#define kNumTopBits 24 +#define kTopValue ((UInt32)1 << kNumTopBits) + +#define kNumBitModelTotalBits 11 +#define kBitModelTotal (1 << kNumBitModelTotalBits) +#define kNumMoveBits 5 + +typedef struct _CRangeDecoder +{ + Byte *Buffer; + Byte *BufferLim; + UInt32 Range; + UInt32 Code; + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback; + int Result; + #endif + int ExtraBytes; +} CRangeDecoder; + +Byte RangeDecoderReadByte(CRangeDecoder *rd) +{ + if (rd->Buffer == rd->BufferLim) + { + #ifdef _LZMA_IN_CB + UInt32 size; + rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); + rd->BufferLim = rd->Buffer + size; + if (size == 0) + #endif + { + rd->ExtraBytes = 1; + return 0xFF; + } + } + return (*rd->Buffer++); +} + +/* #define ReadByte (*rd->Buffer++) */ +#define ReadByte (RangeDecoderReadByte(rd)) + +void RangeDecoderInit(CRangeDecoder *rd, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + Byte *stream, UInt32 bufferSize + #endif + ) +{ + int i; + #ifdef _LZMA_IN_CB + rd->InCallback = inCallback; + rd->Buffer = rd->BufferLim = 0; + #else + rd->Buffer = stream; + rd->BufferLim = stream + bufferSize; + #endif + rd->ExtraBytes = 0; + rd->Code = 0; + rd->Range = (0xFFFFFFFF); + for(i = 0; i < 5; i++) + rd->Code = (rd->Code << 8) | ReadByte; +} + +#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; +#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; +#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } + +UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) +{ + RC_INIT_VAR + UInt32 result = 0; + int i; + for (i = numTotalBits; i > 0; i--) + { + /* UInt32 t; */ + range >>= 1; + + result <<= 1; + if (code >= range) + { + code -= range; + result |= 1; + } + /* + t = (code - range) >> 31; + t &= 1; + code -= range & (t - 1); + result = (result + result) | (1 - t); + */ + RC_NORMALIZE + } + RC_FLUSH_VAR + return result; +} + +int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) +{ + UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; + if (rd->Code < bound) + { + rd->Range = bound; + *prob += (kBitModelTotal - *prob) >> kNumMoveBits; + if (rd->Range < kTopValue) + { + rd->Code = (rd->Code << 8) | ReadByte; + rd->Range <<= 8; + } + return 0; + } + else + { + rd->Range -= bound; + rd->Code -= bound; + *prob -= (*prob) >> kNumMoveBits; + if (rd->Range < kTopValue) + { + rd->Code = (rd->Code << 8) | ReadByte; + rd->Range <<= 8; + } + return 1; + } +} + +#define RC_GET_BIT2(prob, mi, A0, A1) \ + UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ + if (code < bound) \ + { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ + else \ + { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ + RC_NORMALIZE + +#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) + +int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) +{ + int mi = 1; + int i; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + for(i = numLevels; i > 0; i--) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + mi; + RC_GET_BIT(prob, mi) + #else + mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); + #endif + } + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return mi - (1 << numLevels); +} + +int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) +{ + int mi = 1; + int i; + int symbol = 0; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + for(i = 0; i < numLevels; i++) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + mi; + RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) + #else + int bit = RangeDecoderBitDecode(probs + mi, rd); + mi = mi + mi + bit; + symbol |= (bit << i); + #endif + } + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) +{ + int symbol = 1; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + do + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + symbol; + RC_GET_BIT(prob, symbol) + #else + symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); + #endif + } + while (symbol < 0x100); + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) +{ + int symbol = 1; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + do + { + int bit; + int matchBit = (matchByte >> 7) & 1; + matchByte <<= 1; + #ifdef _LZMA_LOC_OPT + { + CProb *prob = probs + ((1 + matchBit) << 8) + symbol; + RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) + } + #else + bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); + symbol = (symbol << 1) | bit; + #endif + if (matchBit != bit) + { + while (symbol < 0x100) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + symbol; + RC_GET_BIT(prob, symbol) + #else + symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); + #endif + } + break; + } + } + while (symbol < 0x100); + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +#define kNumPosBitsMax 4 +#define kNumPosStatesMax (1 << kNumPosBitsMax) + +#define kLenNumLowBits 3 +#define kLenNumLowSymbols (1 << kLenNumLowBits) +#define kLenNumMidBits 3 +#define kLenNumMidSymbols (1 << kLenNumMidBits) +#define kLenNumHighBits 8 +#define kLenNumHighSymbols (1 << kLenNumHighBits) + +#define LenChoice 0 +#define LenChoice2 (LenChoice + 1) +#define LenLow (LenChoice2 + 1) +#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) +#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) +#define kNumLenProbs (LenHigh + kLenNumHighSymbols) + +int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) +{ + if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) + return RangeDecoderBitTreeDecode(p + LenLow + + (posState << kLenNumLowBits), kLenNumLowBits, rd); + if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) + return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + + (posState << kLenNumMidBits), kLenNumMidBits, rd); + return kLenNumLowSymbols + kLenNumMidSymbols + + RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); +} + +#define kNumStates 12 + +#define kStartPosModelIndex 4 +#define kEndPosModelIndex 14 +#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) + +#define kNumPosSlotBits 6 +#define kNumLenToPosStates 4 + +#define kNumAlignBits 4 +#define kAlignTableSize (1 << kNumAlignBits) + +#define kMatchMinLen 2 + +#define IsMatch 0 +#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) +#define IsRepG0 (IsRep + kNumStates) +#define IsRepG1 (IsRepG0 + kNumStates) +#define IsRepG2 (IsRepG1 + kNumStates) +#define IsRep0Long (IsRepG2 + kNumStates) +#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) +#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) +#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) +#define LenCoder (Align + kAlignTableSize) +#define RepLenCoder (LenCoder + kNumLenProbs) +#define Literal (RepLenCoder + kNumLenProbs) + +#if Literal != LZMA_BASE_SIZE +StopCompilingDueBUG +#endif + +#ifdef _LZMA_OUT_READ + +typedef struct _LzmaVarState +{ + CRangeDecoder RangeDecoder; + Byte *Dictionary; + UInt32 DictionarySize; + UInt32 DictionaryPos; + UInt32 GlobalPos; + UInt32 Reps[4]; + int lc; + int lp; + int pb; + int State; + int PreviousIsMatch; + int RemainLen; +} LzmaVarState; + +int LzmaDecoderInit( + unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + unsigned char *dictionary, UInt32 dictionarySize, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + unsigned char *inStream, UInt32 inSize + #endif + ) +{ + LzmaVarState *vs = (LzmaVarState *)buffer; + CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); + UInt32 i; + if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) + return LZMA_RESULT_NOT_ENOUGH_MEM; + vs->Dictionary = dictionary; + vs->DictionarySize = dictionarySize; + vs->DictionaryPos = 0; + vs->GlobalPos = 0; + vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; + vs->lc = lc; + vs->lp = lp; + vs->pb = pb; + vs->State = 0; + vs->PreviousIsMatch = 0; + vs->RemainLen = 0; + dictionary[dictionarySize - 1] = 0; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + RangeDecoderInit(&vs->RangeDecoder, + #ifdef _LZMA_IN_CB + inCallback + #else + inStream, inSize + #endif + ); + return LZMA_RESULT_OK; +} + +int LzmaDecode(unsigned char *buffer, + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + LzmaVarState *vs = (LzmaVarState *)buffer; + CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); + CRangeDecoder rd = vs->RangeDecoder; + int state = vs->State; + int previousIsMatch = vs->PreviousIsMatch; + Byte previousByte; + UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; + UInt32 nowPos = 0; + UInt32 posStateMask = (1 << (vs->pb)) - 1; + UInt32 literalPosMask = (1 << (vs->lp)) - 1; + int lc = vs->lc; + int len = vs->RemainLen; + UInt32 globalPos = vs->GlobalPos; + + Byte *dictionary = vs->Dictionary; + UInt32 dictionarySize = vs->DictionarySize; + UInt32 dictionaryPos = vs->DictionaryPos; + + if (len == -1) + { + *outSizeProcessed = 0; + return LZMA_RESULT_OK; + } + + while(len > 0 && nowPos < outSize) + { + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + len--; + } + if (dictionaryPos == 0) + previousByte = dictionary[dictionarySize - 1]; + else + previousByte = dictionary[dictionaryPos - 1]; +#else + +int LzmaDecode( + Byte *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + unsigned char *inStream, UInt32 inSize, + #endif + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); + CProb *p = (CProb *)buffer; + CRangeDecoder rd; + UInt32 i; + int state = 0; + int previousIsMatch = 0; + Byte previousByte = 0; + UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; + UInt32 nowPos = 0; + UInt32 posStateMask = (1 << pb) - 1; + UInt32 literalPosMask = (1 << lp) - 1; + int len = 0; + if (bufferSize < numProbs * sizeof(CProb)) + return LZMA_RESULT_NOT_ENOUGH_MEM; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + RangeDecoderInit(&rd, + #ifdef _LZMA_IN_CB + inCallback + #else + inStream, inSize + #endif + ); +#endif + + *outSizeProcessed = 0; + while(nowPos < outSize) + { + int posState = (int)( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & posStateMask); + #ifdef _LZMA_IN_CB + if (rd.Result != LZMA_RESULT_OK) + return rd.Result; + #endif + if (rd.ExtraBytes != 0) + return LZMA_RESULT_DATA_ERROR; + if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) + { + CProb *probs = p + Literal + (LZMA_LIT_SIZE * + ((( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & literalPosMask) << lc) + (previousByte >> (8 - lc)))); + + if (state < 4) state = 0; + else if (state < 10) state -= 3; + else state -= 6; + if (previousIsMatch) + { + Byte matchByte; + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + matchByte = dictionary[pos]; + #else + matchByte = outStream[nowPos - rep0]; + #endif + previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); + previousIsMatch = 0; + } + else + previousByte = LzmaLiteralDecode(probs, &rd); + outStream[nowPos++] = previousByte; + #ifdef _LZMA_OUT_READ + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #endif + } + else + { + previousIsMatch = 1; + if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) + { + if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) + { + if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) + { + #ifdef _LZMA_OUT_READ + UInt32 pos; + #endif + if ( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + == 0) + return LZMA_RESULT_DATA_ERROR; + state = state < 7 ? 9 : 11; + #ifdef _LZMA_OUT_READ + pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + continue; + } + } + else + { + UInt32 distance; + if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) + distance = rep1; + else + { + if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) + distance = rep2; + else + { + distance = rep3; + rep3 = rep2; + } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + len = LzmaLenDecode(p + RepLenCoder, &rd, posState); + state = state < 7 ? 8 : 11; + } + else + { + int posSlot; + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + state = state < 7 ? 7 : 10; + len = LzmaLenDecode(p + LenCoder, &rd, posState); + posSlot = RangeDecoderBitTreeDecode(p + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << + kNumPosSlotBits), kNumPosSlotBits, &rd); + if (posSlot >= kStartPosModelIndex) + { + int numDirectBits = ((posSlot >> 1) - 1); + rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); + if (posSlot < kEndPosModelIndex) + { + rep0 += RangeDecoderReverseBitTreeDecode( + p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); + } + else + { + rep0 += RangeDecoderDecodeDirectBits(&rd, + numDirectBits - kNumAlignBits) << kNumAlignBits; + rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); + } + } + else + rep0 = posSlot; + rep0++; + } + if (rep0 == (UInt32)(0)) + { + /* it's for stream version */ + len = -1; + break; + } + if (rep0 > nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + { + return LZMA_RESULT_DATA_ERROR; + } + len += kMatchMinLen; + do + { + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + len--; + } + while(len > 0 && nowPos < outSize); + } + } + + #ifdef _LZMA_OUT_READ + vs->RangeDecoder = rd; + vs->DictionaryPos = dictionaryPos; + vs->GlobalPos = globalPos + nowPos; + vs->Reps[0] = rep0; + vs->Reps[1] = rep1; + vs->Reps[2] = rep2; + vs->Reps[3] = rep3; + vs->State = state; + vs->PreviousIsMatch = previousIsMatch; + vs->RemainLen = len; + #endif + + *outSizeProcessed = nowPos; + return LZMA_RESULT_OK; +} diff --git a/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.h b/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.h new file mode 100644 index 0000000..f58944e --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.h @@ -0,0 +1,100 @@ +/* + LzmaDecode.h + LZMA Decoder interface + + LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#ifndef __LZMADECODE_H +#define __LZMADECODE_H + +/* #define _LZMA_IN_CB */ +/* Use callback for input data */ + +/* #define _LZMA_OUT_READ */ +/* Use read function for output data */ + +/* #define _LZMA_PROB32 */ +/* It can increase speed on some 32-bit CPUs, + but memory usage will be doubled in that case */ + +/* #define _LZMA_LOC_OPT */ +/* Enable local speed optimizations inside code */ + +#ifndef UInt32 +#ifdef _LZMA_UINT32_IS_ULONG +#define UInt32 unsigned long +#else +#define UInt32 unsigned int +#endif +#endif + +#ifdef _LZMA_PROB32 +#define CProb UInt32 +#else +#define CProb unsigned short +#endif + +#define LZMA_RESULT_OK 0 +#define LZMA_RESULT_DATA_ERROR 1 +#define LZMA_RESULT_NOT_ENOUGH_MEM 2 + +#ifdef _LZMA_IN_CB +typedef struct _ILzmaInCallback +{ + int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); +} ILzmaInCallback; +#endif + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +/* +bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) +bufferSize += 100 in case of _LZMA_OUT_READ +by default CProb is unsigned short, +but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) +*/ + +#ifdef _LZMA_OUT_READ +int LzmaDecoderInit( + unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + unsigned char *dictionary, UInt32 dictionarySize, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + unsigned char *inStream, UInt32 inSize + #endif +); +#endif + +int LzmaDecode( + unsigned char *buffer, + #ifndef _LZMA_OUT_READ + UInt32 bufferSize, + int lc, int lp, int pb, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + unsigned char *inStream, UInt32 inSize, + #endif + #endif + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed); + +#endif diff --git a/target/linux/brcm47xx/image/lzma-loader/src/Makefile b/target/linux/brcm47xx/image/lzma-loader/src/Makefile new file mode 100644 index 0000000..3320e56 --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/src/Makefile @@ -0,0 +1,77 @@ +# +# Makefile for Broadcom BCM947XX boards +# +# Copyright 2001-2003, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org> +# Modified to support bzip'd kernels. +# Of course, it would be better to integrate bunzip capability into CFE. +# +# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su> +# Cleaned up, modified for lzma support, removed from kernel +# + +TEXT_START := 0x80001000 +BZ_TEXT_START := 0x80400000 + +OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S + +CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ + -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ + -ffunction-sections -pipe -mlong-calls -fno-common \ + -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap +CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB + +ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START) + +SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/ + +OBJECTS := head.o data.o + +all: loader.gz loader.elf + +# Don't build dependencies, this may die if $(CC) isn't gcc +dep: + +install: + +loader.gz: loader + gzip -nc9 $< > $@ + +loader.elf: loader.o + cp $< $@ + +loader: loader.o + $(OBJCOPY) $< $@ + +loader.o: loader.lds $(OBJECTS) + $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS) + +loader.lds: loader.lds.in Makefile + @sed "$(SEDFLAGS)" < $< > $@ + +data.o: data.lds decompress.image + $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips + +data.lds: + @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@ + +decompress.image: decompress + $(OBJCOPY) $< $@ + +decompress: decompress.lds decompress.o LzmaDecode.o + $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o + +decompress.lds: decompress.lds.in Makefile + @sed "$(SEDFLAGS)" < $< > $@ + +mrproper: clean + +clean: + rm -f loader.gz loader decompress *.lds *.o *.image diff --git a/target/linux/brcm47xx/image/lzma-loader/src/README b/target/linux/brcm47xx/image/lzma-loader/src/README new file mode 100644 index 0000000..16649e9 --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/src/README @@ -0,0 +1,55 @@ +/* + * LZMA compressed kernel decompressor for bcm947xx boards + * + * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +The code is intended to decompress kernel, being compressed using lzma utility +build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory + +decompressor code expects that your .trx file consist of three partitions: + +1) decompressor itself (this is gziped code which pmon/cfe will extract and run +on boot-up instead of real kernel) +2) LZMA compressed kernel (both streamed and regular modes are supported now) +3) Root filesystem + +Please be sure to apply the following patch for use this new trx layout (it will +allow using both new and old trx files for root filesystem lookup code) + +--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 ++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 +@@ -221,7 +221,9 @@ + /* Try looking at TRX header for rootfs offset */ + if (le32_to_cpu(trx->magic) == TRX_MAGIC) { + bcm947xx_parts[1].offset = off; +- if (le32_to_cpu(trx->offsets[1]) > off) ++ if (le32_to_cpu(trx->offsets[2]) > off) ++ off = le32_to_cpu(trx->offsets[2]); ++ else if (le32_to_cpu(trx->offsets[1]) > off) + off = le32_to_cpu(trx->offsets[1]); + continue; + } + + +Revision history: + 0.02 Initial release + 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual + output size to decoder (stream mode compressed input is not + a requirement anymore) + 0.04 Reordered functions using lds script diff --git a/target/linux/brcm47xx/image/lzma-loader/src/decompress.c b/target/linux/brcm47xx/image/lzma-loader/src/decompress.c new file mode 100644 index 0000000..ce2876a --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/src/decompress.c @@ -0,0 +1,179 @@ +/* + * LZMA compressed kernel decompressor for bcm947xx boards + * + * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * Please note, this was code based on the bunzip2 decompressor code + * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left + * is an idea and part of original vendor code + * + * + * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com> + * pass actual output size to decoder (stream mode + * compressed input is not a requirement anymore) + * + * 24-Apr-2005 Oleg I. Vdovikin + * reordered functions using lds script, removed forward decl + * + */ + +#include "LzmaDecode.h" + +#define BCM4710_FLASH 0x1fc00000 /* Flash */ + +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 + +#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) + +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 + +#define cache_unroll(base,op) \ + __asm__ __volatile__( \ + ".set noreorder;\n" \ + ".set mips3;\n" \ + "cache %1, (%0);\n" \ + ".set mips0;\n" \ + ".set reorder\n" \ + : \ + : "r" (base), \ + "i" (op)); + +static __inline__ void blast_icache(unsigned long size, unsigned long lsize) +{ + unsigned long start = KSEG0; + unsigned long end = (start + size); + + while(start < end) { + cache_unroll(start,Index_Invalidate_I); + start += lsize; + } +} + +static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) +{ + unsigned long start = KSEG0; + unsigned long end = (start + size); + + while(start < end) { + cache_unroll(start,Index_Writeback_Inv_D); + start += lsize; + } +} + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ + +struct trx_header { + unsigned int magic; /* "HDR0" */ + unsigned int len; /* Length of file including header */ + unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ + unsigned int flag_version; /* 0:15 flags, 16:31 version */ + unsigned int offsets[3]; /* Offsets of partitions from start of header */ +}; + +/* beyound the image end, size not known in advance */ +extern unsigned char workspace[]; + +unsigned int offset; +unsigned char *data; + +/* flash access should be aligned, so wrapper is used */ +/* read byte from the flash, all accesses are 32-bit aligned */ +static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) +{ + static unsigned int val; + + if (((unsigned int)offset % 4) == 0) { + val = *(unsigned int *)data; + data += 4; + } + + *bufferSize = 1; + *buffer = ((unsigned char *)&val) + (offset++ & 3); + + return LZMA_RESULT_OK; +} + +static __inline__ unsigned char get_byte(void) +{ + unsigned char *buffer; + UInt32 fake; + + return read_byte(0, &buffer, &fake), *buffer; +} + +/* should be the first function */ +void entry(unsigned long icache_size, unsigned long icache_lsize, + unsigned long dcache_size, unsigned long dcache_lsize, + unsigned long fw_arg0, unsigned long fw_arg1, + unsigned long fw_arg2, unsigned long fw_arg3) +{ + unsigned int i; /* temp value */ + unsigned int lc; /* literal context bits */ + unsigned int lp; /* literal pos state bits */ + unsigned int pb; /* pos state bits */ + unsigned int osize; /* uncompressed size */ + + ILzmaInCallback callback; + callback.Read = read_byte; + + /* look for trx header, 32-bit data access */ + for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH)); + ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536); + + /* compressed kernel is in the partition 0 or 1 */ + if (((struct trx_header *)data)->offsets[1] > 65536) + data += ((struct trx_header *)data)->offsets[0]; + else + data += ((struct trx_header *)data)->offsets[1]; + + offset = 0; + + /* lzma args */ + i = get_byte(); + lc = i % 9, i = i / 9; + lp = i % 5, pb = i / 5; + + /* skip rest of the LZMA coder property */ + for (i = 0; i < 4; i++) + get_byte(); + + /* read the lower half of uncompressed size in the header */ + osize = ((unsigned int)get_byte()) + + ((unsigned int)get_byte() << 8) + + ((unsigned int)get_byte() << 16) + + ((unsigned int)get_byte() << 24); + + /* skip rest of the header (upper half of uncompressed size) */ + for (i = 0; i < 4; i++) + get_byte(); + + /* decompress kernel */ + if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback, + (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK) + { + blast_dcache(dcache_size, dcache_lsize); + blast_icache(icache_size, icache_lsize); + + /* Jump to load address */ + ((void (*)(unsigned long, unsigned long, unsigned long, + unsigned long)) LOADADDR)(fw_arg0, fw_arg1, fw_arg2, + fw_arg3); + } +} diff --git a/target/linux/brcm47xx/image/lzma-loader/src/decompress.lds.in b/target/linux/brcm47xx/image/lzma-loader/src/decompress.lds.in new file mode 100644 index 0000000..33f56f8 --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/src/decompress.lds.in @@ -0,0 +1,20 @@ +OUTPUT_ARCH(mips) +ENTRY(entry) +SECTIONS { + . = BZ_TEXT_START; + .text : { + *(.text.entry) + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } + + workspace = .; +} diff --git a/target/linux/brcm47xx/image/lzma-loader/src/head.S b/target/linux/brcm47xx/image/lzma-loader/src/head.S new file mode 100644 index 0000000..3a33e40 --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/src/head.S @@ -0,0 +1,160 @@ +/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ +/* cache manipulation adapted from Broadcom code */ +/* idea taken from original bunzip2 decompressor code */ +/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ +/* Licensed under the linux kernel's version of the GPL.*/ + +#include <asm/asm.h> +#include <asm/regdef.h> + +#define KSEG0 0x80000000 + +#define C0_CONFIG $16 +#define C0_TAGLO $28 +#define C0_TAGHI $29 + +#define CONF1_DA_SHIFT 7 /* D$ associativity */ +#define CONF1_DA_MASK 0x00000380 +#define CONF1_DA_BASE 1 +#define CONF1_DL_SHIFT 10 /* D$ line size */ +#define CONF1_DL_MASK 0x00001c00 +#define CONF1_DL_BASE 2 +#define CONF1_DS_SHIFT 13 /* D$ sets/way */ +#define CONF1_DS_MASK 0x0000e000 +#define CONF1_DS_BASE 64 +#define CONF1_IA_SHIFT 16 /* I$ associativity */ +#define CONF1_IA_MASK 0x00070000 +#define CONF1_IA_BASE 1 +#define CONF1_IL_SHIFT 19 /* I$ line size */ +#define CONF1_IL_MASK 0x00380000 +#define CONF1_IL_BASE 2 +#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ +#define CONF1_IS_MASK 0x01c00000 +#define CONF1_IS_BASE 64 + +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 + + .text + LEAF(startup) + .set noreorder + addi sp, -48 + sw a0, 16(sp) + sw a1, 20(sp) + sw a2, 24(sp) + sw a3, 28(sp) + + /* Copy decompressor code to the right place */ + li t2, BZ_TEXT_START + add a0, t2, 0 + la a1, code_start + la a2, code_stop +$L1: + lw t0, 0(a1) + sw t0, 0(a0) + add a1, 4 + add a0, 4 + blt a1, a2, $L1 + nop + + /* At this point we need to invalidate dcache and */ + /* icache before jumping to new code */ + +1: /* Get cache sizes */ + .set mips32 + mfc0 s0,C0_CONFIG,1 + .set mips0 + + li s1,CONF1_DL_MASK + and s1,s0 + beq s1,zero,nodc + nop + + srl s1,CONF1_DL_SHIFT + li t0,CONF1_DL_BASE + sll s1,t0,s1 /* s1 has D$ cache line size */ + + li s2,CONF1_DA_MASK + and s2,s0 + srl s2,CONF1_DA_SHIFT + addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ + + li t0,CONF1_DS_MASK + and t0,s0 + srl t0,CONF1_DS_SHIFT + li s3,CONF1_DS_BASE + sll s3,s3,t0 /* s3 has D$ sets per way */ + + multu s2,s3 /* sets/way * associativity */ + mflo t0 /* total cache lines */ + + multu s1,t0 /* D$ linesize * lines */ + mflo s2 /* s2 is now D$ size in bytes */ + + /* Initilize the D$: */ + mtc0 zero,C0_TAGLO + mtc0 zero,C0_TAGHI + + li t0,KSEG0 /* Just an address for the first $ line */ + addu t1,t0,s2 /* + size of cache == end */ + + .set mips3 +1: cache Index_Writeback_Inv_D,0(t0) + .set mips0 + bne t0,t1,1b + addu t0,s1 + +nodc: + /* Now we get to do it all again for the I$ */ + + move s3,zero /* just in case there is no icache */ + move s4,zero + + li t0,CONF1_IL_MASK + and t0,s0 + beq t0,zero,noic + nop + + srl t0,CONF1_IL_SHIFT + li s3,CONF1_IL_BASE + sll s3,t0 /* s3 has I$ cache line size */ + + li t0,CONF1_IA_MASK + and t0,s0 + srl t0,CONF1_IA_SHIFT + addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ + + li t0,CONF1_IS_MASK + and t0,s0 + srl t0,CONF1_IS_SHIFT + li s5,CONF1_IS_BASE + sll s5,t0 /* s5 has I$ sets per way */ + + multu s4,s5 /* sets/way * associativity */ + mflo t0 /* s4 is now total cache lines */ + + multu s3,t0 /* I$ linesize * lines */ + mflo s4 /* s4 is cache size in bytes */ + + /* Initilize the I$: */ + mtc0 zero,C0_TAGLO + mtc0 zero,C0_TAGHI + + li t0,KSEG0 /* Just an address for the first $ line */ + addu t1,t0,s4 /* + size of cache == end */ + + .set mips3 +1: cache Index_Invalidate_I,0(t0) + .set mips0 + bne t0,t1,1b + addu t0,s3 + +noic: + move a0,s3 /* icache line size */ + move a1,s4 /* icache size */ + move a2,s1 /* dcache line size */ + jal t2 + move a3,s2 /* dcache size */ + + .set reorder + END(startup) diff --git a/target/linux/brcm47xx/image/lzma-loader/src/loader.lds.in b/target/linux/brcm47xx/image/lzma-loader/src/loader.lds.in new file mode 100644 index 0000000..20f2ea9 --- /dev/null +++ b/target/linux/brcm47xx/image/lzma-loader/src/loader.lds.in @@ -0,0 +1,17 @@ +OUTPUT_ARCH(mips) +ENTRY(startup) +SECTIONS { + . = TEXT_START; + .text : { + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } +} |