summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/linux/coldfire/Makefile23
-rw-r--r--target/linux/coldfire/config-default112
-rw-r--r--target/linux/coldfire/image/Makefile34
-rw-r--r--target/linux/coldfire/patches/001-Coldfire-architecture-support-in-Linux-2.6.38.patch11199
-rw-r--r--target/linux/coldfire/patches/002-MCF54451-and-MCF54455-support-in-Linux-2.6.38.patch10546
-rw-r--r--target/linux/coldfire/patches/003-MCF547x-and-MCF548x-support-in-Linux-2.6.38.patch7673
-rw-r--r--target/linux/coldfire/patches/004-MCF54418-support-in-Linux-2.6.38.patch6643
-rw-r--r--target/linux/coldfire/patches/005-Add-serial-driver-and-irda-driver-support-for-MCF544.patch200
-rw-r--r--target/linux/coldfire/patches/006-Add-FEC-driver-support-for-MCF5445x-MCF5441x-MCF547x.patch2759
-rw-r--r--target/linux/coldfire/patches/007-Add-eDMA-support-for-MCF5445x.patch1639
-rw-r--r--target/linux/coldfire/patches/008-Add-DSPI-driver-support-for-MCF5445x-MCF5441x.patch1580
-rw-r--r--target/linux/coldfire/patches/009-Add-ALSA-driver-for-MCF5445x.patch1869
-rw-r--r--target/linux/coldfire/patches/010-Add-SRAM-char-device-driver-support-for-MCF5445x.patch198
-rw-r--r--target/linux/coldfire/patches/011-Add-CAU-driver-for-MCF5445x-and-MCF5441x.patch2514
-rw-r--r--target/linux/coldfire/patches/012-Add-vDSO-support-for-Coldfire-platform.patch497
-rw-r--r--target/linux/coldfire/patches/013-Add-MCD-DMA-driver-for-MCF547x-MCF548x.patch5318
-rw-r--r--target/linux/coldfire/patches/014-Add-CFV4E-FPU-support-for-MCF547x-MCF548x.patch23
-rw-r--r--target/linux/coldfire/patches/015-Add-driver-to-support-ten-UART-devices-on-MCF5441x.patch104
-rw-r--r--target/linux/coldfire/patches/016-Add-nand-driver-support-for-M54418TWR-board.patch1381
-rw-r--r--target/linux/coldfire/patches/017-Add-cpu-dma-sync-function-for-coldfire-platform.patch68
-rw-r--r--target/linux/coldfire/patches/018-Add-SSD1289-TFT-LCD-framebuffer-driver-on-TWR-MCF544.patch973
-rw-r--r--target/linux/coldfire/patches/019-Fix-the-format-field-for-the-Coldfire-exception-fram.patch27
-rw-r--r--target/linux/coldfire/patches/020-Add-dual-FEC-1588-timer-support.patch1257
-rw-r--r--target/linux/coldfire/patches/021-Add-ethernet-switch-driver-for-MCF54418.patch6152
-rw-r--r--target/linux/coldfire/patches/022-Redefine-I-O-read-and-write-functions.patch32
-rw-r--r--target/linux/coldfire/patches/023-Replace-readl-and-writel-for-FEC-driver.patch357
-rw-r--r--target/linux/coldfire/patches/024-Add-SEC-1.1-support-for-MCF547x-and-MCF548x.patch2093
-rw-r--r--target/linux/coldfire/patches/025-Add-I2C-driver-for-MCF5445x-MCF547x-MCF548x.patch1216
-rw-r--r--target/linux/coldfire/patches/026-Add-RTC-driver-support-for-MCF5445x.patch627
-rw-r--r--target/linux/coldfire/patches/027-Add-RTC-driver-support-on-MCF5441x-platform.patch681
-rw-r--r--target/linux/coldfire/patches/028-Add-SD-MMC-SDIO-over-SPI-support-for-MCF54451-and-MC.patch195
-rw-r--r--target/linux/coldfire/patches/029-Add-eSDHC-driver-for-MCF5441x.patch2214
-rw-r--r--target/linux/coldfire/patches/030-Add-SPI-device-configuration-for-FXS-and-FXO-on-MCF5.patch38
-rw-r--r--target/linux/coldfire/patches/031-Add-watchdog-driver-support-for-MCF5445x-and-MCF547x.patch338
-rw-r--r--target/linux/coldfire/patches/032-Change-some-jffs2-warning-to-debug-info.patch33
-rw-r--r--target/linux/coldfire/patches/033-Fix-structure-fsl_ssd1289_data-definition-bug-for-SS.patch49
-rw-r--r--target/linux/coldfire/patches/034-Enable-the-NFC-driver-for-soft_ecc.patch50
-rw-r--r--target/linux/coldfire/patches/036-Add-FlexCAN-support-on-ColdFire-M548X-M54418-platfor.patch764
-rw-r--r--target/linux/coldfire/patches/037-Add-ColdFire-MCF54455-PATA-interface-support.patch934
-rw-r--r--target/linux/coldfire/patches/038-Add-PCI-Framebuffer-support-for-Silicon-Motion-s-Lyn.patch1287
-rw-r--r--target/linux/coldfire/patches/039-Add-PCI-bus-driver-for-M54455EVB-and-M547X_8X.patch3051
-rw-r--r--target/linux/coldfire/patches/040-Add-USB-support-for-MCF5445x-and-MCF54418.patch7007
-rw-r--r--target/linux/coldfire/patches/041-Fix-CAU-driver-bug-for-SHA1-digest-algorithm.patch25
-rw-r--r--target/linux/coldfire/patches/042-Fix-NEED_MULTIPLE_NODES-unmet-direct-dependencies-wa.patch24
-rw-r--r--target/linux/coldfire/patches/043-workaround-for-zero-page-used-on-ColdFire-platform.patch33
-rw-r--r--target/linux/coldfire/patches/044-Fix-Max3353-otg-toggle-bug.patch26
-rw-r--r--target/linux/coldfire/patches/045-Add-high-resolution-kernel-timer-support.patch24
-rw-r--r--target/linux/coldfire/patches/046-Convert-rtc-drivers-to-use-the-alarm_irq_enable-meth.patch109
-rw-r--r--target/linux/coldfire/patches/047-Fix-DSPI-compile-error-for-MCF547x-MCF548x.patch37
-rw-r--r--target/linux/coldfire/patches/048-Fix-i2c-driver-bug-when-reinserting-as-module.patch75
-rw-r--r--target/linux/coldfire/patches/049-Update-FEC-driver-for-MCF5445x-and-MCF54418.patch113
-rw-r--r--target/linux/coldfire/patches/050-Update-the-DMA-map-function-for-CF-platform.patch37
-rw-r--r--target/linux/coldfire/patches/051-Update-SD-MMC-over-SPI-driver-for-MCF54451-and-MCF54.patch105
-rw-r--r--target/linux/coldfire/patches/052-Update-the-default-configurations-for-ColdFire-V4-bo.patch6983
-rw-r--r--target/linux/coldfire/patches/100-kernel-2.6.38-Fix-FEC-driver-bugs-for-MCF547x-MCF548x.patch180
-rw-r--r--target/linux/coldfire/patches/101-kernel-2.6.38-Fix-LCD-framebuffer-driver-data-swap-bug-for-MCF5441.patch49
-rw-r--r--target/linux/coldfire/patches/102-kernel-2.6.38-Fix-SD-MMC-SDIO-over-SPI-driver-bug-when-reinserting.patch34
-rw-r--r--target/linux/coldfire/patches/103-kernel-2.6.38-Fix-i2c-driver-could-not-work-as-module.patch30
-rw-r--r--target/linux/coldfire/patches/200-fec_select_phylib.patch10
59 files changed, 0 insertions, 91649 deletions
diff --git a/target/linux/coldfire/Makefile b/target/linux/coldfire/Makefile
deleted file mode 100644
index 22e683f..0000000
--- a/target/linux/coldfire/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Copyright (C) 2009-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=m68k
-BOARD:=coldfire
-BOARDNAME:=Freescale Coldfire v4e
-FEATURES:=squashfs broken
-MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-
-LINUX_VERSION:=2.6.38.8
-
-include $(INCLUDE_DIR)/target.mk
-
-define Target/Description
- Build firmware images for ColdFire v4e boards
-endef
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/coldfire/config-default b/target/linux/coldfire/config-default
deleted file mode 100644
index f2a7a52..0000000
--- a/target/linux/coldfire/config-default
+++ /dev/null
@@ -1,112 +0,0 @@
-# CONFIG_8139TOO is not set
-CONFIG_ADVANCED=y
-# CONFIG_AMIGA is not set
-# CONFIG_APOLLO is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
-# CONFIG_ATARI is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BOOTPARAM is not set
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM5222_PHY=y
-CONFIG_CFDMA=y
-CONFIG_CFV4E=y
-CONFIG_CLASSIC_RCU=y
-CONFIG_COLDFIRE=y
-# CONFIG_COLDFIRE_EDMA is not set
-# CONFIG_COLDFIRE_WATCHDOG is not set
-CONFIG_DMADEVICES=y
-CONFIG_FEC_548x=y
-CONFIG_FEC_548x_AUTO_NEGOTIATION=y
-CONFIG_FEC_548x_ENABLE_FEC2=y
-CONFIG_FEC_548x_SHARED_PHY=y
-CONFIG_FPU=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GEN_RTC is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_IDE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HP300 is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_IDE is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LEDS_ALIX is not set
-# CONFIG_M5441X is not set
-# CONFIG_M5445X is not set
-# CONFIG_M5474LITE is not set
-# CONFIG_M5475AFE is not set
-# CONFIG_M5475BFE is not set
-# CONFIG_M5475CFE is not set
-# CONFIG_M5475DFE is not set
-# CONFIG_M5475EFE is not set
-# CONFIG_M5475FFE is not set
-# CONFIG_M547X is not set
-CONFIG_M547X_8X=y
-CONFIG_M5484LITE=y
-# CONFIG_M5485AFE is not set
-# CONFIG_M5485BFE is not set
-# CONFIG_M5485CFE is not set
-# CONFIG_M5485DFE is not set
-# CONFIG_M5485EFE is not set
-# CONFIG_M5485FFE is not set
-CONFIG_M548X=y
-# CONFIG_M68020 is not set
-# CONFIG_M68030 is not set
-# CONFIG_M68040 is not set
-# CONFIG_M68060 is not set
-CONFIG_M68K=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_MAC is not set
-CONFIG_MCD_DMA=y
-CONFIG_MCFCLK=200000000
-CONFIG_MCF_USER_HALT=y
-# CONFIG_MEMSTICK is not set
-CONFIG_MMU_CFV4E=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_NATIONAL8364x_PHY is not set
-# CONFIG_NATIONAL8384x_PHY is not set
-# CONFIG_NE2K_PCI is not set
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NOR_FLASH_BASE=0xE0000000
-# CONFIG_NO_DMA is not set
-# CONFIG_NO_IOPORT is not set
-CONFIG_PCI=y
-# CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PROC_HARDWARE is not set
-# CONFIG_Q40 is not set
-# CONFIG_R6040 is not set
-# CONFIG_RMW_INSNS is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SDRAM_BASE=0x00000000
-CONFIG_SDRAM_SIZE=0x04000000
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_COLDFIRE=y
-# CONFIG_SERIAL_COLDFIRE_EDMA is not set
-# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-# CONFIG_SERIAL_CONSOLE is not set
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=115200
-CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_SERIAL_PCH_UART is not set
-CONFIG_SINGLE_MEMORY_CHUNK=y
-CONFIG_SLABINFO=y
-# CONFIG_SUN3 is not set
-# CONFIG_SUN3X is not set
-CONFIG_TIME_LOW_RES=y
-CONFIG_UID16=y
-# CONFIG_VDSO is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VME is not set
diff --git a/target/linux/coldfire/image/Makefile b/target/linux/coldfire/image/Makefile
deleted file mode 100644
index 94e28b2..0000000
--- a/target/linux/coldfire/image/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-JFFS2_BLOCKSIZE=128k
-
-define Image/Prepare
-endef
-
-define Image/BuildKernel
- $(TARGET_CROSS)objcopy -O binary -R .bss -R .note -R .comment \
- -R .note.gnu.build-id -S $(LINUX_DIR)/vmlinux $(KDIR)/vmlinux.bin
- mkimage -A m68k -O linux -T kernel -a 0x00020000 -e 0x00020000 \
- -C none -n 'M68K OpenWrt Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/vmlinux.bin $(BIN_DIR)/$(IMG_PREFIX)-uImage
-endef
-
-define Image/Build
- $(call Image/Build/$(1),$(1))
-endef
-
-define Image/Build/jffs2-128k
-endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/coldfire/patches/001-Coldfire-architecture-support-in-Linux-2.6.38.patch b/target/linux/coldfire/patches/001-Coldfire-architecture-support-in-Linux-2.6.38.patch
deleted file mode 100644
index 6b88991..0000000
--- a/target/linux/coldfire/patches/001-Coldfire-architecture-support-in-Linux-2.6.38.patch
+++ /dev/null
@@ -1,11199 +0,0 @@
-From c462e1a613c8f84bb503189b0796d036dd1e5376 Mon Sep 17 00:00:00 2001
-From: Jason Jin <jason.jin@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:35 +0800
-Subject: [PATCH 01/52] Coldfire architecture support in Linux 2.6.38
-
-Coldfire architecture support in Linux 2.6.38.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
-Signed-off-by: Jason Jin <jason.jin@freescale.com>
----
- arch/m68k/Kconfig | 279 +++++++++-
- arch/m68k/Kconfig.debug | 9 +
- arch/m68k/Makefile | 48 ++-
- arch/m68k/boot/Makefile | 68 +++
- arch/m68k/coldfire/Makefile | 10 +
- arch/m68k/coldfire/common/Makefile | 7 +
- arch/m68k/coldfire/common/cache.c | 45 ++
- arch/m68k/coldfire/common/clk.c | 51 ++
- arch/m68k/coldfire/common/entry.S | 745 ++++++++++++++++++++++++
- arch/m68k/coldfire/common/head.S | 466 +++++++++++++++
- arch/m68k/coldfire/common/ints.c | 544 ++++++++++++++++++
- arch/m68k/coldfire/common/muldi3.S | 73 +++
- arch/m68k/coldfire/common/signal.c | 991 ++++++++++++++++++++++++++++++++
- arch/m68k/coldfire/common/traps.c | 457 +++++++++++++++
- arch/m68k/include/asm/atomic.h | 33 +-
- arch/m68k/include/asm/bitops_mm.h | 12 +-
- arch/m68k/include/asm/bootinfo.h | 42 ++
- arch/m68k/include/asm/cacheflush_mm.h | 14 +-
- arch/m68k/include/asm/cf-sram.h | 21 +
- arch/m68k/include/asm/cf_bitops.h | 443 ++++++++++++++
- arch/m68k/include/asm/cf_cacheflush.h | 20 +
- arch/m68k/include/asm/cf_entry.h | 153 +++++
- arch/m68k/include/asm/cf_io.h | 185 ++++++
- arch/m68k/include/asm/cf_pgalloc.h | 112 ++++
- arch/m68k/include/asm/cf_pgtable.h | 364 ++++++++++++
- arch/m68k/include/asm/cf_raw_io.h | 188 ++++++
- arch/m68k/include/asm/cf_tlbflush.h | 66 +++
- arch/m68k/include/asm/cf_uaccess.h | 262 +++++++++
- arch/m68k/include/asm/cf_virtconvert.h | 63 ++
- arch/m68k/include/asm/cfcache.h | 146 +++++
- arch/m68k/include/asm/cfmmu.h | 112 ++++
- arch/m68k/include/asm/coldfire.h | 70 ++-
- arch/m68k/include/asm/delay_mm.h | 42 ++-
- arch/m68k/include/asm/div64.h | 11 +-
- arch/m68k/include/asm/dma.h | 109 ++++-
- arch/m68k/include/asm/elf.h | 70 +++-
- arch/m68k/include/asm/io_mm.h | 234 ++++++--
- arch/m68k/include/asm/irq.h | 14 +-
- arch/m68k/include/asm/machdep.h | 15 +-
- arch/m68k/include/asm/mcfdspi.h | 59 ++
- arch/m68k/include/asm/mcfsim.h | 121 ++++
- arch/m68k/include/asm/mcfuart.h | 64 ++
- arch/m68k/include/asm/mmu.h | 15 +-
- arch/m68k/include/asm/mmu_context.h | 184 ++++++-
- arch/m68k/include/asm/page.h | 10 +-
- arch/m68k/include/asm/page_mm.h | 61 ++
- arch/m68k/include/asm/page_offset.h | 21 +-
- arch/m68k/include/asm/pgalloc.h | 12 +-
- arch/m68k/include/asm/pgtable_mm.h | 36 ++-
- arch/m68k/include/asm/processor.h | 45 ++-
- arch/m68k/include/asm/ptrace.h | 48 ++-
- arch/m68k/include/asm/raw_io.h | 15 +-
- arch/m68k/include/asm/segment.h | 17 +
- arch/m68k/include/asm/setup.h | 36 ++
- arch/m68k/include/asm/signal.h | 10 +-
- arch/m68k/include/asm/string.h | 20 +-
- arch/m68k/include/asm/swab.h | 15 +-
- arch/m68k/include/asm/system_mm.h | 23 +-
- arch/m68k/include/asm/tlbflush.h | 24 +-
- arch/m68k/include/asm/uaccess_mm.h | 80 ++--
- arch/m68k/include/asm/unistd.h | 11 +-
- arch/m68k/include/asm/virtconvert.h | 11 +
- arch/m68k/kernel/Makefile | 23 +-
- arch/m68k/kernel/asm-offsets.c | 28 +
- arch/m68k/kernel/dma.c | 47 ++-
- arch/m68k/kernel/process.c | 66 +++
- arch/m68k/kernel/setup.c | 72 ++-
- arch/m68k/kernel/sys_m68k.c | 80 +++
- arch/m68k/kernel/time.c | 142 +++++-
- arch/m68k/kernel/vmlinux-cf.lds | 142 +++++
- arch/m68k/kernel/vmlinux.lds.S | 12 +-
- arch/m68k/lib/checksum.c | 129 +++++
- arch/m68k/lib/muldi3.c | 13 +
- arch/m68k/lib/string.c | 68 +++
- arch/m68k/lib/uaccess.c | 247 ++++++++
- arch/m68k/mm/Makefile | 2 +
- arch/m68k/mm/cache.c | 19 +
- arch/m68k/mm/cf-mmu.c | 311 ++++++++++
- arch/m68k/mm/cf-sram.c | 80 +++
- arch/m68k/mm/hwtest.c | 10 +
- arch/m68k/mm/init.c | 15 +-
- arch/m68k/mm/kmap.c | 82 +++-
- arch/m68k/mm/memory.c | 17 +
- fs/namespace.c | 8 +
- include/linux/fsl_devices.h | 14 +-
- 85 files changed, 8962 insertions(+), 197 deletions(-)
- create mode 100644 arch/m68k/boot/Makefile
- create mode 100644 arch/m68k/coldfire/Makefile
- create mode 100644 arch/m68k/coldfire/common/Makefile
- create mode 100644 arch/m68k/coldfire/common/cache.c
- create mode 100644 arch/m68k/coldfire/common/clk.c
- create mode 100644 arch/m68k/coldfire/common/entry.S
- create mode 100644 arch/m68k/coldfire/common/head.S
- create mode 100644 arch/m68k/coldfire/common/ints.c
- create mode 100644 arch/m68k/coldfire/common/muldi3.S
- create mode 100644 arch/m68k/coldfire/common/signal.c
- create mode 100644 arch/m68k/coldfire/common/traps.c
- create mode 100644 arch/m68k/include/asm/cf-sram.h
- create mode 100644 arch/m68k/include/asm/cf_bitops.h
- create mode 100644 arch/m68k/include/asm/cf_cacheflush.h
- create mode 100644 arch/m68k/include/asm/cf_entry.h
- create mode 100644 arch/m68k/include/asm/cf_io.h
- create mode 100644 arch/m68k/include/asm/cf_pgalloc.h
- create mode 100644 arch/m68k/include/asm/cf_pgtable.h
- create mode 100644 arch/m68k/include/asm/cf_raw_io.h
- create mode 100644 arch/m68k/include/asm/cf_tlbflush.h
- create mode 100644 arch/m68k/include/asm/cf_uaccess.h
- create mode 100644 arch/m68k/include/asm/cf_virtconvert.h
- create mode 100644 arch/m68k/include/asm/cfcache.h
- create mode 100644 arch/m68k/include/asm/cfmmu.h
- create mode 100644 arch/m68k/include/asm/mcfdspi.h
- create mode 100644 arch/m68k/kernel/vmlinux-cf.lds
- create mode 100644 arch/m68k/mm/cf-mmu.c
- create mode 100644 arch/m68k/mm/cf-sram.c
-
---- a/arch/m68k/Kconfig
-+++ b/arch/m68k/Kconfig
-@@ -9,6 +9,14 @@ config MMU
- bool
- default y
-
-+config GENERIC_TIME
-+ bool "Enable generic timer"
-+ default n
-+
-+config GENERIC_CLOCKEVENTS
-+ bool "Enable generic clockevents"
-+ default n
-+
- config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-@@ -34,7 +42,7 @@ config GENERIC_CALIBRATE_DELAY
-
- config TIME_LOW_RES
- bool
-- default y
-+ default n
-
- config GENERIC_IOMAP
- bool
-@@ -46,7 +54,7 @@ config ARCH_MAY_HAVE_PC_FDC
- default y
-
- config NO_IOPORT
-- def_bool y
-+ def_bool !(M5445X || M547X_8X || M5441X)
-
- config NO_DMA
- def_bool SUN3
-@@ -105,6 +113,35 @@ config PCMCIA
- To compile this driver as modules, choose M here: the
- modules will be called pcmcia_core and ds.
-
-+config COLDFIRE
-+ bool "ColdFire V4e support"
-+ default y
-+ select CFV4E
-+ help
-+ Say Y if you want to build a kernel to run on one of the ColdFire
-+ V4e boards.
-+
-+config CFV4E
-+ bool
-+ depends on COLDFIRE
-+ select MMU_CFV4E if MMU
-+ default y
-+
-+config FPU
-+ bool "ColdFire V4e FPU support"
-+ default n
-+ help
-+ This enables support for CFV4E FPU feature.
-+
-+config MCD_DMA
-+ bool "ColdFire MCD DMA support"
-+ depends on M547X_8X
-+ default y
-+ help
-+ This enables support for the ColdFire 547x/548x family
-+ multichannel DMA support. Many drivers need it.
-+ If you want it, say Y
-+
- config AMIGA
- bool "Amiga support"
- select MMU_MOTOROLA if MMU
-@@ -122,6 +159,16 @@ config ATARI
- this kernel on an Atari, say Y here and browse the material
- available in <file:Documentation/m68k>; otherwise say N.
-
-+config PCI
-+ bool "PCI bus support"
-+ depends on M54455 || M547X_8X
-+ default n
-+ help
-+ Find out whether you have a PCI motherboard. PCI is the name of a
-+ bus system, i.e. the way the CPU talks to the other stuff inside
-+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-+ VESA. If you have PCI, say Y, otherwise N.
-+
- config MAC
- bool "Macintosh support"
- select MMU_MOTOROLA if MMU
-@@ -276,6 +323,147 @@ config M68060
- If you anticipate running this kernel on a computer with a MC68060
- processor, say Y. Otherwise, say N.
-
-+config M5445X
-+ bool "MCF5445x support"
-+ depends on COLDFIRE
-+ select GENERIC_TIME
-+ select USB_EHCI_FSL
-+ select HAVE_FSL_USB_DR
-+ help
-+ This option will add support for the MCF544x processor with mmu.
-+
-+config M54451
-+ bool
-+ depends on M5445X
-+ default n
-+
-+config M54455
-+ bool
-+ depends on M5445X
-+ default n
-+
-+choice
-+ prompt "Model"
-+ depends on M5445X
-+ default M54451EVB
-+ config M54451EVB
-+ bool "M54451EVB"
-+ select M54451
-+ config M54455EVB
-+ bool "M54455EVB"
-+ select M54455
-+endchoice
-+
-+config HAVE_FSL_USB_DR
-+ bool
-+ default n
-+
-+config M547X_8X
-+ bool "MCF547x/MCF548x support"
-+ depends on COLDFIRE
-+ help
-+ This option will add support for the MCF547x/MCF548x processor with mmu.
-+
-+config M547X
-+ bool
-+ depends on M547X_8X
-+ default n
-+
-+config M548X
-+ bool
-+ depends on M547X_8X
-+ default n
-+
-+choice
-+ prompt "Model"
-+ depends on M547X_8X
-+ default M5485CFE
-+
-+config M5474LITE
-+ bool "MCF5474LITE"
-+ select M547X
-+config M5475AFE
-+ bool "MCF5475AFE"
-+ select M547X
-+config M5475BFE
-+ bool "MCF5475BFE"
-+ select M547X
-+config M5475CFE
-+ bool "MCF5475CFE"
-+ select M547X
-+config M5475DFE
-+ bool "MCF5475DFE"
-+ select M547X
-+config M5475EFE
-+ bool "MCF5475EFE"
-+ select M547X
-+config M5475FFE
-+ bool "MCF5475FFE"
-+ select M547X
-+config M5484LITE
-+ bool "MCF5484LITE"
-+ select M548X
-+config M5485AFE
-+ bool "MCF5485AFE"
-+ select M548X
-+config M5485BFE
-+ bool "MCF5485BFE"
-+ select M548X
-+config M5485CFE
-+ bool "MCF5485CFE"
-+ select M548X
-+config M5485DFE
-+ bool "MCF5485DFE"
-+ select M548X
-+config M5485EFE
-+ bool "MCF5485EFE"
-+ select M548X
-+config M5485FFE
-+ bool "MCF5485FFE"
-+ select M548X
-+
-+endchoice
-+
-+config M5441X
-+ bool "MCF5441x support"
-+ depends on COLDFIRE
-+ select GENERIC_TIME
-+ select USB_EHCI_FSL
-+ select HAVE_FSL_USB_DR
-+ help
-+ This option will add support for the MCF5441x processor with mmu.
-+
-+config M54418
-+ bool
-+ depends on M5441X
-+ default n
-+choice
-+ prompt "Model"
-+ depends on M5441X
-+ default M54418EVB
-+ config M54418EVB
-+ bool "M54418EVB"
-+ select M54418
-+endchoice
-+
-+config MCFCLK
-+ int
-+ default 240000000 if M54451EVB
-+ default 266666666 if M54455EVB
-+ default 266000000 if M547X
-+ default 200000000 if M548X
-+ default 250000000 if M54418EVB && !USB_M5441X_PLLCLK
-+ default 150000000 if M54418EVB && USB_M5441X_PLLCLK
-+ help
-+ Coldfire System clock.
-+
-+config MCF_USER_HALT
-+ bool "Coldfire User Halt Enable"
-+ depends on M5445X || M547X_8X || M5441X
-+ default n
-+ help
-+ Enables the HALT instruction in User Mode.
-+
- config MMU_MOTOROLA
- bool
-
-@@ -283,6 +471,81 @@ config MMU_SUN3
- bool
- depends on MMU && !MMU_MOTOROLA
-
-+config MMU_CFV4E
-+ bool
-+
-+config SDRAM_BASE
-+ hex
-+ depends on COLDFIRE
-+ default 0x40000000 if M5445X
-+ default 0x00000000 if M547X_8X
-+ default 0x40000000 if M5441X
-+
-+config SDRAM_SIZE
-+ hex
-+ depends on COLDFIRE
-+ default 0x08000000 if M54451EVB
-+ default 0x10000000 if M54455EVB
-+ default 0x04000000 if M547X_8X
-+ default 0x08000000 if M54418EVB
-+
-+config NOR_FLASH_BASE
-+ hex "NOR Flash Base Address"
-+ depends on COLDFIRE
-+ default 0x00000000 if M54451EVB
-+ default 0x00000000 if M54455EVB
-+ default 0xE0000000 if M5475CFE
-+ default 0xE0000000 if M5485CFE
-+ default 0xFF800000 if M5484LITE
-+ default 0xFF800000 if M5474LITE
-+ default 0x00000000 if M54418EVB
-+
-+config DMA_BASE
-+ hex
-+ depends on COLDFIRE
-+ default 0xef000000 if M5445X
-+ default 0xef000000 if M547X_8X
-+ default 0xdf000000 if M5441X
-+
-+config DMA_SIZE
-+ hex
-+ depends on COLDFIRE
-+ default 0x1000000 if M5445X
-+ default 0x800000 if M547X_8X
-+ default 0x1000000 if M5441X
-+
-+config SRAM
-+ bool "SRAM allocation APIs support on mcfv4 platform"
-+ depends on COLDFIRE && (M5445X || M5441X)
-+ default y
-+ select GENERIC_ALLOCATOR
-+
-+config SRAM_BASE
-+ hex
-+ depends on COLDFIRE && SRAM
-+ default 0x8ff00000 if M5445X
-+ default 0x8ff00000 if M5441X
-+
-+config SRAM_SIZE
-+ hex
-+ depends on COLDFIRE && SRAM
-+ default 0x8000 if M5445X
-+ default 0x10000 if M5441X
-+
-+config SRAM_ALLOC_GRANULARITY
-+ hex
-+ depends on SRAM
-+ default 0x200 if (M5445X || M5441X)
-+
-+config VDSO
-+ bool "Support VDSO page"
-+ depends on MMU
-+ default n
-+ help
-+ This will enable support for the kernel mapping a vDSO page
-+ in process space, and subsequently handing down the entry point
-+ to the libc through the ELF auxiliary vector.
-+
- config M68KFPU_EMU
- bool "Math emulation support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
-@@ -449,6 +712,14 @@ config ZONE_DMA
- source "drivers/pci/Kconfig"
-
- source "drivers/zorro/Kconfig"
-+endmenu
-+
-+menu "Power management options"
-+
-+config PM
-+ bool "Power Management support"
-+ help
-+ Support processor power management modes
-
- endmenu
-
-@@ -583,7 +854,7 @@ config DN_SERIAL
-
- config SERIAL_CONSOLE
- bool "Support for serial port console"
-- depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
-+ depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO || COLDFIRE) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL || SERIAL_COLDFIRE)
- ---help---
- If you say Y here, it will be possible to use a serial port as the
- system console (the system console is the device which receives all
-@@ -606,6 +877,8 @@ config SERIAL_CONSOLE
-
- endmenu
-
-+source "kernel/time/Kconfig"
-+
- source "fs/Kconfig"
-
- source "arch/m68k/Kconfig.debug"
---- a/arch/m68k/Kconfig.debug
-+++ b/arch/m68k/Kconfig.debug
-@@ -2,4 +2,13 @@ menu "Kernel hacking"
-
- source "lib/Kconfig.debug"
-
-+config BOOTPARAM
-+ bool 'Compiled-in Kernel Boot Parameter'
-+ depends on COLDFIRE
-+
-+config BOOTPARAM_STRING
-+ string 'Kernel Boot Parameter'
-+ default 'console=ttyS0,115200'
-+ depends on BOOTPARAM
-+
- endmenu
---- a/arch/m68k/Makefile
-+++ b/arch/m68k/Makefile
-@@ -1,6 +1,8 @@
- #
- # m68k/Makefile
- #
-+# Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+#
- # This file is included by the global makefile so that you can add your own
- # architecture-specific flags and dependencies. Remember to do have actions
- # for "archclean" and "archdep" for cleaning up and making dependencies for
-@@ -10,13 +12,13 @@
- # License. See the file "COPYING" in the main directory of this archive
- # for more details.
- #
--# Copyright (C) 1994 by Hamish Macdonald
--#
-
--KBUILD_DEFCONFIG := multi_defconfig
-+KBUILD_DEFCONFIG := amiga_defconfig#multi_defconfig
-
- # override top level makefile
-+ifndef CONFIG_COLDFIRE
- AS += -m68020
-+endif
- LDFLAGS := -m m68kelf
- KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
- ifneq ($(SUBARCH),$(ARCH))
-@@ -30,12 +32,18 @@ ifdef CONFIG_SUN3
- LDFLAGS_vmlinux = -N
- endif
-
-+ifdef CONFIG_COLDFIRE
-+OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -S
-+# LDFLAGS_vmlinux = --verbose
-+endif
-+
- CHECKFLAGS += -D__mc68000__
-
- # without -fno-strength-reduce the 53c7xx.c driver fails ;-(
- KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2
-
- # enable processor switch if compiled only for a single cpu
-+ifndef CONFIG_COLDFIRE
- ifndef CONFIG_M68020
- ifndef CONFIG_M68030
-
-@@ -49,6 +57,22 @@ endif
-
- endif
- endif
-+endif
-+
-+ifdef CONFIG_M5445X
-+KBUILD_CFLAGS += -march=isac -mcpu=54455 -msoft-float -g
-+KBUILD_AFLAGS += -march=isac -mcpu=54455 -msoft-float
-+endif
-+
-+ifdef CONFIG_M547X_8X
-+KBUILD_CFLAGS += -mcfv4e -g
-+KBUILD_AFLAGS += -mcfv4e
-+endif
-+
-+ifdef CONFIG_M5441X
-+KBUILD_CFLAGS += -march=isac -mcpu=54418 -msoft-float -g
-+KBUILD_AFLAGS += -march=isac -mcpu=54418 -msoft-float
-+endif
-
- ifdef CONFIG_KGDB
- # If configured for kgdb support, include debugging infos and keep the
-@@ -57,8 +81,12 @@ KBUILD_CFLAGS := $(subst -fomit-frame-po
- endif
-
- ifndef CONFIG_SUN3
-+ifndef CONFIG_COLDFIRE
- head-y := arch/m68k/kernel/head.o
- else
-+head-y := arch/m68k/coldfire/common/head.o
-+endif
-+else
- head-y := arch/m68k/kernel/sun3-head.o
- endif
-
-@@ -79,7 +107,20 @@ core-$(CONFIG_SUN3) += arch/m68k/sun3/
- core-$(CONFIG_M68040) += arch/m68k/fpsp040/
- core-$(CONFIG_M68060) += arch/m68k/ifpsp060/
- core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/
-+core-$(CONFIG_COLDFIRE) += arch/m68k/coldfire/
-+
-+ifdef CONFIG_COLDFIRE
-+boot := arch/m68k/boot
-+
-+all: uImage
-
-+zImage zImage.srec uImage uImage.srec vmlinux.srec: vmlinux
-+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-+
-+archclean:
-+ $(Q)$(MAKE) $(clean)=$(boot)
-+
-+else
- all: zImage
-
- lilo: vmlinux
-@@ -117,6 +158,7 @@ endif
-
- archclean:
- rm -f vmlinux.gz vmlinux.bz2
-+endif
-
- install:
- sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
---- /dev/null
-+++ b/arch/m68k/boot/Makefile
-@@ -0,0 +1,68 @@
-+#
-+# arch/m68k/boot/Makefile
-+#
-+# Based on arch/sh/boot/Makefile by Stuart Menefy
-+#
-+# Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+# by Kurt Mahan <kmahan@freescale.com>
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License. See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+
-+MKIMAGE := $(srctree)/scripts/mkuboot.sh
-+
-+#
-+# Assign safe dummy values if these variables are not defined,
-+# in order to suppress error message.
-+#
-+CONFIG_SDRAM_BASE ?= 0x40000000
-+CONFIG_IMG_START ?= 0x00020000
-+
-+export CONFIG_SDRAM_BASE CONFIG_IMG_START
-+
-+targets := zImage zImage.srec vmlinux.srec uImage uImage.srec
-+
-+$(obj)/zImage: $(obj)/vmlinux.bin FORCE
-+ $(call if_changed,gzip)
-+ @echo ' Image $@ is ready'
-+
-+OBJCOPYFLAGS_zImage.srec := -I binary -O srec
-+$(obj)/zImage.srec: $(obj)/zImage
-+ $(call if_changed,objcopy)
-+
-+KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
-+ $$[$(CONFIG_SDRAM_BASE) + \
-+ $(CONFIG_IMG_START)]')
-+
-+KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \
-+ $$[$(CONFIG_SDRAM_BASE) + \
-+ $(CONFIG_IMG_START)]')
-+
-+quiet_cmd_uimage = UIMAGE $@
-+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A m68k -O linux -T kernel \
-+ -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
-+ -n 'Linux-$(KERNELRELEASE)' -d $< $@
-+
-+$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
-+ $(call if_changed,uimage)
-+ @echo ' Image $@ is ready'
-+
-+$(obj)/vmlinux.bin: vmlinux FORCE
-+ $(call if_changed,objcopy)
-+
-+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-+ $(call if_changed,gzip)
-+
-+OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
-+$(obj)/vmlinux.srec: $(obj)/vmlinux.bin
-+ $(call if_changed,objcopy)
-+
-+OBJCOPYFLAGS_uImage.srec := -I binary -O srec
-+$(obj)/uImage.srec: $(obj)/uImage
-+ $(call if_changed,objcopy)
-+
-+clean-files += uImage uImage.srec \
-+ zImage zImage.srec \
-+ vmlinux.srec vmlinux.bin vmlinux.bin.gz
---- /dev/null
-+++ b/arch/m68k/coldfire/Makefile
-@@ -0,0 +1,10 @@
-+#
-+# Makefile for Linux arch/m68k/coldfire source directory
-+#
-+
-+obj-y += common/
-+obj-$(CONFIG_VDSO) += vdso/
-+
-+obj-$(CONFIG_M5445X) += m5445x/
-+obj-$(CONFIG_M547X_8X) += m547x/
-+obj-$(CONFIG_M5441X) += m5441x/
---- /dev/null
-+++ b/arch/m68k/coldfire/common/Makefile
-@@ -0,0 +1,7 @@
-+#
-+# Makefile for Linux arch/m68k/coldfire/common source directory
-+#
-+
-+obj-y:= entry.o cache.o signal.o muldi3.o traps.o ints.o clk.o
-+extra-y:= head.o
-+
---- /dev/null
-+++ b/arch/m68k/coldfire/common/cache.c
-@@ -0,0 +1,45 @@
-+/*
-+ * linux/arch/m68k/coldfire/cache.c
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ * Kurt Mahan kmahan@freescale.com
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <asm/cfcache.h>
-+#include <asm/coldfire.h>
-+#include <asm/system.h>
-+
-+/* Cache Control Reg shadow reg */
-+unsigned long shadow_cacr;
-+
-+/**
-+ * cacr_set - Set the Cache Control Register
-+ * @x Value to set
-+ */
-+void cacr_set(unsigned long x)
-+{
-+ shadow_cacr = x;
-+
-+ __asm__ __volatile__ ("movec %0, %%cacr"
-+ : /* no outputs */
-+ : "r" (shadow_cacr));
-+}
-+
-+/**
-+ * cacr_get - Get the current value of the Cache Control Register
-+ *
-+ * @return CACR value
-+ */
-+unsigned long cacr_get(void)
-+{
-+ return shadow_cacr;
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/common/clk.c
-@@ -0,0 +1,51 @@
-+/***************************************************************************/
-+
-+/*
-+ * clk.c -- general ColdFire CPU kernel clk handling
-+ *
-+ * Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
-+ * Copyright (C) 2011 Freescale Semiconductore, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+*/
-+
-+/***************************************************************************/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <asm/coldfire.h>
-+
-+/***************************************************************************/
-+
-+struct clk *clk_get(struct device *dev, const char *id)
-+{
-+ return NULL;
-+}
-+EXPORT_SYMBOL(clk_get);
-+
-+int clk_enable(struct clk *clk)
-+{
-+ return 0;
-+}
-+EXPORT_SYMBOL(clk_enable);
-+
-+void clk_disable(struct clk *clk)
-+{
-+}
-+EXPORT_SYMBOL(clk_disable);
-+
-+void clk_put(struct clk *clk)
-+{
-+}
-+EXPORT_SYMBOL(clk_put);
-+
-+unsigned long clk_get_rate(struct clk *clk)
-+{
-+ return MCF_CLK;
-+}
-+EXPORT_SYMBOL(clk_get_rate);
-+/***************************************************************************/
---- /dev/null
-+++ b/arch/m68k/coldfire/common/entry.S
-@@ -0,0 +1,745 @@
-+/*
-+ * arch/m68k/coldfire/entry.S
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ * Kurt Mahan kmahan@freescale.com
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * Based on:
-+ *
-+ * arch/m68knommu/platform/5307/entry.S &
-+ * arch/m68k/kernel/entry.S
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file README.legal in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/sys.h>
-+#include <linux/linkage.h>
-+#include <asm/cf_entry.h>
-+#include <asm/errno.h>
-+#include <asm/setup.h>
-+#include <asm/segment.h>
-+#include <asm/traps.h>
-+#include <asm/unistd.h>
-+#include <asm/asm-offsets.h>
-+
-+/*
-+ * TASK_INFO:
-+ *
-+ * - TINFO_PREEMPT (struct thread_info / preempt_count)
-+ * Used to keep track of preemptability
-+ * - TINFO_FLAGS (struct thread_info / flags - include/asm-m68k/thread_info.h)
-+ * Various bit flags that are checked for scheduling/tracing
-+ * Bits 0-7 are checked every exception exit
-+ * 8-15 are checked every syscall exit
-+ *
-+ * TIF_SIGPENDING 6
-+ * TIF_NEED_RESCHED 7
-+ * TIF_DELAYED_TRACE 14
-+ * TIF_SYSCALL_TRACE 15
-+ * TIF_MEMDIE 16 (never checked here)
-+ */
-+
-+.bss
-+
-+sw_ksp:
-+.long 0
-+
-+sw_usp:
-+.long 0
-+
-+.text
-+
-+.globl system_call
-+.globl buserr
-+.globl trap
-+.globl resume
-+.globl ret_from_exception
-+.globl ret_from_signal
-+.globl sys_call_table
-+.globl ret_from_interrupt
-+.globl inthandler
-+
-+ENTRY(buserr)
-+#ifdef CONFIG_COLDFIRE_FOO
-+ movew #0x2700,%sr /* lock interrupts */
-+#endif
-+ SAVE_ALL_INT
-+#ifdef CONFIG_COLDFIRE_FOO
-+ movew PT_0FF_SR(%sp),%d3 /* get original %sr */
-+ oril #0x2000,%d3 /* set supervisor mode in it */
-+ movew %d3,%sr /* recover irq state */
-+#endif
-+ GET_CURRENT(%d0)
-+ movel %sp,%sp@- /* stack frame pointer argument */
-+ jsr buserr_c
-+ addql #4,%sp
-+ jra .Lret_from_exception
-+
-+ENTRY(trap)
-+ SAVE_ALL_INT
-+ GET_CURRENT(%d0)
-+ movel %sp,%sp@- /* stack frame pointer argument */
-+ jsr trap_c
-+ addql #4,%sp
-+ jra .Lret_from_exception
-+
-+ /* After a fork we jump here directly from resume,
-+ %d1 contains the previous task schedule_tail */
-+ENTRY(ret_from_fork)
-+ movel %d1,%sp@-
-+ jsr schedule_tail
-+ addql #4,%sp
-+ jra .Lret_from_exception
-+
-+do_trace_entry:
-+ movel #-ENOSYS,%d1 /* needed for strace */
-+ movel %d1,%sp@(PT_OFF_D0)
-+ subql #4,%sp
-+ SAVE_SWITCH_STACK
-+ jbsr syscall_trace
-+ RESTORE_SWITCH_STACK
-+ addql #4,%sp
-+ movel %sp@(PT_OFF_ORIG_D0),%d0
-+ cmpl #NR_syscalls,%d0
-+ jcs syscall
-+badsys:
-+ movel #-ENOSYS,%d1
-+ movel %d1,%sp@(PT_OFF_D0)
-+ jra ret_from_exception
-+
-+do_trace_exit:
-+ subql #4,%sp
-+ SAVE_SWITCH_STACK
-+ jbsr syscall_trace
-+ RESTORE_SWITCH_STACK
-+ addql #4,%sp
-+ jra .Lret_from_exception
-+
-+ENTRY(ret_from_signal)
-+ RESTORE_SWITCH_STACK
-+ addql #4,%sp
-+ jra .Lret_from_exception
-+
-+ENTRY(system_call)
-+ SAVE_ALL_SYS
-+
-+ GET_CURRENT(%d1)
-+ /* save top of frame */
-+ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-+
-+ /* syscall trace */
-+ tstb %curptr@(TASK_INFO+TINFO_FLAGS+2)
-+ jmi do_trace_entry /* SYSCALL_TRACE is set */
-+ cmpl #NR_syscalls,%d0
-+ jcc badsys
-+syscall:
-+ movel #sys_call_table,%a0
-+ asll #2,%d0
-+ addl %d0,%a0
-+ movel %a0@,%a0
-+ jsr %a0@
-+ movel %d0,%sp@(PT_OFF_D0) /* save the return value */
-+ret_from_syscall:
-+ movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
-+ jne syscall_exit_work /* flags set so process */
-+1: RESTORE_ALL
-+
-+syscall_exit_work:
-+ btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel */
-+ bnes 1b /* if so, skip resched, signals */
-+
-+ btstl #15,%d0 /* check if SYSCALL_TRACE */
-+ jne do_trace_exit
-+ btstl #14,%d0 /* check if DELAYED_TRACE */
-+ jne do_delayed_trace
-+ btstl #6,%d0 /* check if SIGPENDING */
-+ jne do_signal_return
-+ pea resume_userspace
-+ jra schedule
-+
-+ENTRY(ret_from_exception)
-+.Lret_from_exception:
-+ btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel */
-+ bnes 1f /* if so, skip resched, signals */
-+ movel %d0,%sp@- /* Only allow interrupts when we are */
-+ move %sr,%d0 /* last one on the kernel stack, */
-+ andl #ALLOWINT,%d0 /* otherwise stack overflow can occur */
-+ move %d0,%sr /* during heavy interrupt load. */
-+ movel %sp@+,%d0
-+
-+resume_userspace:
-+ moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0
-+ jne exit_work /* SIGPENDING and/or NEED_RESCHED set */
-+1: RESTORE_ALL
-+
-+exit_work:
-+ /* save top of frame */
-+ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-+ btstl #6,%d0 /* check for SIGPENDING in flags */
-+ jne do_signal_return
-+ pea resume_userspace
-+ jra schedule
-+
-+do_signal_return:
-+ subql #4,%sp /* dummy return address */
-+ SAVE_SWITCH_STACK
-+ pea %sp@(SWITCH_STACK_SIZE)
-+ clrl %sp@-
-+ bsrl do_signal
-+ addql #8,%sp
-+ RESTORE_SWITCH_STACK
-+ addql #4,%sp
-+ jbra resume_userspace
-+
-+do_delayed_trace:
-+ bclr #7,%sp@(PT_OFF_SR) /* clear trace bit in SR */
-+ pea 1 /* send SIGTRAP */
-+ movel %curptr,%sp@-
-+ pea LSIGTRAP
-+ jbsr send_sig
-+ addql #8,%sp
-+ addql #4,%sp
-+ jbra resume_userspace
-+
-+/*
-+ * This is the interrupt handler (for all hardware interrupt
-+ * sources). It figures out the vector number and calls the appropriate
-+ * interrupt service routine directly.
-+ */
-+ENTRY(inthandler)
-+ SAVE_ALL_INT
-+ GET_CURRENT(%d0)
-+ movel %curptr@(TASK_INFO+TINFO_PREEMPT),%d0
-+ addil #0x10000,%d0
-+ movel %d0,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+ /* put exception # in d0 */
-+ movel %sp@(PT_VECTOR),%d0
-+ swap %d0 /* extract bits 25:18 */
-+ lsrl #2,%d0
-+ andl #0x0ff,%d0
-+
-+ movel %sp,%sp@-
-+ movel %d0,%sp@- /* put vector # on stack */
-+auto_irqhandler_fixup = . + 2
-+ jbsr process_int /* process the IRQ */
-+ addql #8,%sp /* pop parameters off stack */
-+
-+ret_from_interrupt:
-+
-+ movel %curptr@(TASK_INFO+TINFO_PREEMPT),%d0
-+ subil #0x10000,%d0
-+ movel %d0,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+ jeq ret_from_last_interrupt
-+2: RESTORE_ALL
-+
-+ ALIGN
-+ret_from_last_interrupt:
-+ moveb %sp@(PT_OFF_SR),%d0
-+ andl #(~ALLOWINT>>8)&0xff,%d0
-+ jne 2b
-+
-+ /* check if we need to do software interrupts */
-+ tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING
-+ jeq .Lret_from_exception
-+ pea ret_from_exception
-+ jra do_softirq
-+
-+ENTRY(user_inthandler)
-+ SAVE_ALL_INT
-+ GET_CURRENT(%d0)
-+ movel %curptr@(TASK_INFO+TINFO_PREEMPT),%d0
-+ addil #0x10000,%d0
-+ movel %d0,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+ /* put exception # in d0 */
-+ movel %sp@(PT_VECTOR),%d0
-+user_irqvec_fixup = . + 2
-+ swap %d0 /* extract bits 25:18 */
-+ lsrl #2,%d0
-+ andl #0x0ff,%d0
-+
-+ movel %sp,%sp@-
-+ movel %d0,%sp@- /* put vector # on stack */
-+user_irqhandler_fixup = . + 2
-+ jbsr process_int /* process the IRQ */
-+ addql #8,%sp /* pop parameters off stack */
-+
-+ movel %curptr@(TASK_INFO+TINFO_PREEMPT),%d0
-+ subil #0x10000,%d0
-+ movel %d0,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+ jeq ret_from_last_interrupt
-+ RESTORE_ALL
-+
-+/* Handler for uninitialized and spurious interrupts */
-+
-+ENTRY(bad_inthandler)
-+ SAVE_ALL_INT
-+ GET_CURRENT(%d0)
-+ movel %curptr@(TASK_INFO+TINFO_PREEMPT),%d0
-+ addil #0x10000,%d0
-+ movel %d0,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+
-+ movel %sp,%sp@-
-+ jsr handle_badint
-+ addql #4,%sp
-+
-+ movel %curptr@(TASK_INFO+TINFO_PREEMPT),%d0
-+ subil #0x10000,%d0
-+ movel %d0,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+ jeq ret_from_last_interrupt
-+ RESTORE_ALL
-+
-+ENTRY(sys_fork)
-+ SAVE_SWITCH_STACK
-+ pea %sp@(SWITCH_STACK_SIZE)
-+ jbsr m68k_fork
-+ addql #4,%sp
-+ RESTORE_SWITCH_STACK
-+ rts
-+
-+ENTRY(sys_clone)
-+ SAVE_SWITCH_STACK
-+ pea %sp@(SWITCH_STACK_SIZE)
-+ jbsr m68k_clone
-+ addql #4,%sp
-+ RESTORE_SWITCH_STACK
-+ rts
-+
-+ENTRY(sys_vfork)
-+ SAVE_SWITCH_STACK
-+ pea %sp@(SWITCH_STACK_SIZE)
-+ jbsr m68k_vfork
-+ addql #4,%sp
-+ RESTORE_SWITCH_STACK
-+ rts
-+
-+ENTRY(sys_sigsuspend)
-+ SAVE_SWITCH_STACK
-+ pea %sp@(SWITCH_STACK_SIZE)
-+ jbsr do_sigsuspend
-+ addql #4,%sp
-+ RESTORE_SWITCH_STACK
-+ rts
-+
-+ENTRY(sys_sigreturn)
-+ SAVE_SWITCH_STACK
-+ jbsr do_sigreturn
-+ RESTORE_SWITCH_STACK
-+ rts
-+
-+ENTRY(sys_rt_sigreturn)
-+ SAVE_SWITCH_STACK
-+ jbsr do_rt_sigreturn
-+ RESTORE_SWITCH_STACK
-+ rts
-+
-+resume:
-+ /*
-+ * Beware - when entering resume, prev (the current task) is
-+ * in a0, next (the new task) is in a1,so don't change these
-+ * registers until their contents are no longer needed.
-+ */
-+
-+ /* save sr */
-+ movew %sr,%d0
-+ movew %d0,%a0@(TASK_THREAD+THREAD_SR)
-+
-+ /* save usp */
-+ /* Save USP via %a1 (which is saved/restored from %d0) */
-+ movel %a1,%d0
-+ movel %usp,%a1
-+ movel %a1,%a0@(TASK_THREAD+THREAD_USP)
-+ movel %d0,%a1
-+
-+ /* save non-scratch registers on stack */
-+ SAVE_SWITCH_STACK
-+
-+ /* save current kernel stack pointer */
-+ movel %sp,%a0@(TASK_THREAD+THREAD_KSP)
-+#ifdef CONFIG_FPU
-+ /* save floating point context */
-+ fsave %a0@(TASK_THREAD+THREAD_FPSTATE)
-+
-+1: tstb %a0@(TASK_THREAD+THREAD_FPSTATE)
-+ jeq 3f
-+2:
-+ fmovemd %fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG)
-+3:
-+#endif
-+ /* Return previous task in %d1 */
-+ movel %curptr,%d1
-+
-+ /* switch to new task (a1 contains new task) */
-+ movel %a1,%curptr
-+#ifdef CONFIG_FPU
-+ /* restore floating point context */
-+1: tstb %a1@(TASK_THREAD+THREAD_FPSTATE)
-+ jeq 3f
-+2:
-+ fmovemd %a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7
-+/* frestore %a1@(TASK_THREAD+THREAD_FPCNTL)*/
-+3: frestore %a1@(TASK_THREAD+THREAD_FPSTATE)
-+#endif
-+ /* restore the kernel stack pointer */
-+ movel %a1@(TASK_THREAD+THREAD_KSP),%sp
-+
-+ /* restore non-scratch registers */
-+ RESTORE_SWITCH_STACK
-+
-+ /* restore user stack pointer */
-+ movel %a1@(TASK_THREAD+THREAD_USP),%a0
-+ movel %a0,%usp
-+
-+ /* restore status register */
-+ movew %a1@(TASK_THREAD+THREAD_SR),%d0
-+ movew %d0,%sr
-+
-+ rts
-+
-+.data
-+ALIGN
-+sys_call_table:
-+ .long sys_ni_syscall /* 0 - old "setup()" system call*/
-+ .long sys_exit
-+ .long sys_fork
-+ .long sys_read
-+ .long sys_write
-+ .long sys_open /* 5 */
-+ .long sys_close
-+ .long sys_waitpid
-+ .long sys_creat
-+ .long sys_link
-+ .long sys_unlink /* 10 */
-+ .long sys_execve
-+ .long sys_chdir
-+ .long sys_time
-+ .long sys_mknod
-+ .long sys_chmod /* 15 */
-+ .long sys_chown16
-+ .long sys_ni_syscall /* old break syscall holder */
-+ .long sys_stat
-+ .long sys_lseek
-+ .long sys_getpid /* 20 */
-+ .long sys_mount
-+ .long sys_oldumount
-+ .long sys_setuid16
-+ .long sys_getuid16
-+ .long sys_stime /* 25 */
-+ .long sys_ptrace
-+ .long sys_alarm
-+ .long sys_fstat
-+ .long sys_pause
-+ .long sys_utime /* 30 */
-+ .long sys_ni_syscall /* old stty syscall holder */
-+ .long sys_ni_syscall /* old gtty syscall holder */
-+ .long sys_access
-+ .long sys_nice
-+ .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
-+ .long sys_sync
-+ .long sys_kill
-+ .long sys_rename
-+ .long sys_mkdir
-+ .long sys_rmdir /* 40 */
-+ .long sys_dup
-+ .long sys_pipe
-+ .long sys_times
-+ .long sys_ni_syscall /* old prof syscall holder */
-+ .long sys_brk /* 45 */
-+ .long sys_setgid16
-+ .long sys_getgid16
-+ .long sys_signal
-+ .long sys_geteuid16
-+ .long sys_getegid16 /* 50 */
-+ .long sys_acct
-+ .long sys_umount /* recycled never used phys() */
-+ .long sys_ni_syscall /* old lock syscall holder */
-+ .long sys_ioctl
-+ .long sys_fcntl /* 55 */
-+ .long sys_ni_syscall /* old mpx syscall holder */
-+ .long sys_setpgid
-+ .long sys_ni_syscall /* old ulimit syscall holder */
-+ .long sys_ni_syscall
-+ .long sys_umask /* 60 */
-+ .long sys_chroot
-+ .long sys_ustat
-+ .long sys_dup2
-+ .long sys_getppid
-+ .long sys_getpgrp /* 65 */
-+ .long sys_setsid
-+ .long sys_sigaction
-+ .long sys_sgetmask
-+ .long sys_ssetmask
-+ .long sys_setreuid16 /* 70 */
-+ .long sys_setregid16
-+ .long sys_sigsuspend
-+ .long sys_sigpending
-+ .long sys_sethostname
-+ .long sys_setrlimit /* 75 */
-+ .long sys_old_getrlimit
-+ .long sys_getrusage
-+ .long sys_gettimeofday
-+ .long sys_settimeofday
-+ .long sys_getgroups16 /* 80 */
-+ .long sys_setgroups16
-+ .long old_select
-+ .long sys_symlink
-+ .long sys_lstat
-+ .long sys_readlink /* 85 */
-+ .long sys_uselib
-+ .long sys_swapon
-+ .long sys_reboot
-+ .long sys_old_readdir
-+ .long old_mmap /* 90 */
-+ .long sys_munmap
-+ .long sys_truncate
-+ .long sys_ftruncate
-+ .long sys_fchmod
-+ .long sys_fchown16 /* 95 */
-+ .long sys_getpriority
-+ .long sys_setpriority
-+ .long sys_ni_syscall /* old profil syscall holder */
-+ .long sys_statfs
-+ .long sys_fstatfs /* 100 */
-+ .long sys_ni_syscall /* ioperm for i386 */
-+ .long sys_socketcall
-+ .long sys_syslog
-+ .long sys_setitimer
-+ .long sys_getitimer /* 105 */
-+ .long sys_newstat
-+ .long sys_newlstat
-+ .long sys_newfstat
-+ .long sys_ni_syscall
-+ .long sys_ni_syscall /* 110 */ /* iopl for i386 */
-+ .long sys_vhangup
-+ .long sys_ni_syscall /* obsolete idle() syscall */
-+ .long sys_ni_syscall /* vm86old for i386 */
-+ .long sys_wait4
-+ .long sys_swapoff /* 115 */
-+ .long sys_sysinfo
-+ .long sys_ipc
-+ .long sys_fsync
-+ .long sys_sigreturn
-+ .long sys_clone /* 120 */
-+ .long sys_setdomainname
-+ .long sys_newuname
-+ .long sys_cacheflush /* modify_ldt for i386 */
-+ .long sys_adjtimex
-+ .long sys_mprotect /* 125 */
-+ .long sys_sigprocmask
-+ .long sys_ni_syscall /* old "create_module" */
-+ .long sys_init_module
-+ .long sys_delete_module
-+ .long sys_ni_syscall /* 130 - old "get_kernel_syms" */
-+ .long sys_quotactl
-+ .long sys_getpgid
-+ .long sys_fchdir
-+ .long sys_bdflush
-+ .long sys_sysfs /* 135 */
-+ .long sys_personality
-+ .long sys_ni_syscall /* for afs_syscall */
-+ .long sys_setfsuid16
-+ .long sys_setfsgid16
-+ .long sys_llseek /* 140 */
-+ .long sys_getdents
-+ .long sys_select
-+ .long sys_flock
-+ .long sys_msync
-+ .long sys_readv /* 145 */
-+ .long sys_writev
-+ .long sys_getsid
-+ .long sys_fdatasync
-+ .long sys_sysctl
-+ .long sys_mlock /* 150 */
-+ .long sys_munlock
-+ .long sys_mlockall
-+ .long sys_munlockall
-+ .long sys_sched_setparam
-+ .long sys_sched_getparam /* 155 */
-+ .long sys_sched_setscheduler
-+ .long sys_sched_getscheduler
-+ .long sys_sched_yield
-+ .long sys_sched_get_priority_max
-+ .long sys_sched_get_priority_min /* 160 */
-+ .long sys_sched_rr_get_interval
-+ .long sys_nanosleep
-+ .long sys_mremap
-+ .long sys_setresuid16
-+ .long sys_getresuid16 /* 165 */
-+ .long sys_getpagesize
-+ .long sys_ni_syscall /* old sys_query_module */
-+ .long sys_poll
-+ .long sys_nfsservctl
-+ .long sys_setresgid16 /* 170 */
-+ .long sys_getresgid16
-+ .long sys_prctl
-+ .long sys_rt_sigreturn
-+ .long sys_rt_sigaction
-+ .long sys_rt_sigprocmask /* 175 */
-+ .long sys_rt_sigpending
-+ .long sys_rt_sigtimedwait
-+ .long sys_rt_sigqueueinfo
-+ .long sys_rt_sigsuspend
-+ .long sys_pread64 /* 180 */
-+ .long sys_pwrite64
-+ .long sys_lchown16;
-+ .long sys_getcwd
-+ .long sys_capget
-+ .long sys_capset /* 185 */
-+ .long sys_sigaltstack
-+ .long sys_sendfile
-+ .long sys_ni_syscall /* streams1 */
-+ .long sys_ni_syscall /* streams2 */
-+ .long sys_vfork /* 190 */
-+ .long sys_getrlimit
-+ .long sys_mmap2
-+ .long sys_truncate64
-+ .long sys_ftruncate64
-+ .long sys_stat64 /* 195 */
-+ .long sys_lstat64
-+ .long sys_fstat64
-+ .long sys_chown
-+ .long sys_getuid
-+ .long sys_getgid /* 200 */
-+ .long sys_geteuid
-+ .long sys_getegid
-+ .long sys_setreuid
-+ .long sys_setregid
-+ .long sys_getgroups /* 205 */
-+ .long sys_setgroups
-+ .long sys_fchown
-+ .long sys_setresuid
-+ .long sys_getresuid
-+ .long sys_setresgid /* 210 */
-+ .long sys_getresgid
-+ .long sys_lchown
-+ .long sys_setuid
-+ .long sys_setgid
-+ .long sys_setfsuid /* 215 */
-+ .long sys_setfsgid
-+ .long sys_pivot_root
-+ .long sys_ni_syscall
-+ .long sys_ni_syscall
-+ .long sys_getdents64 /* 220 */
-+ .long sys_gettid
-+ .long sys_tkill
-+ .long sys_setxattr
-+ .long sys_lsetxattr
-+ .long sys_fsetxattr /* 225 */
-+ .long sys_getxattr
-+ .long sys_lgetxattr
-+ .long sys_fgetxattr
-+ .long sys_listxattr
-+ .long sys_llistxattr /* 230 */
-+ .long sys_flistxattr
-+ .long sys_removexattr
-+ .long sys_lremovexattr
-+ .long sys_fremovexattr
-+ .long sys_futex /* 235 */
-+ .long sys_sendfile64
-+ .long sys_mincore
-+ .long sys_madvise
-+ .long sys_fcntl64
-+ .long sys_readahead /* 240 */
-+ .long sys_io_setup
-+ .long sys_io_destroy
-+ .long sys_io_getevents
-+ .long sys_io_submit
-+ .long sys_io_cancel /* 245 */
-+ .long sys_fadvise64
-+ .long sys_exit_group
-+ .long sys_lookup_dcookie
-+ .long sys_epoll_create
-+ .long sys_epoll_ctl /* 250 */
-+ .long sys_epoll_wait
-+ .long sys_remap_file_pages
-+ .long sys_set_tid_address
-+ .long sys_timer_create
-+ .long sys_timer_settime /* 255 */
-+ .long sys_timer_gettime
-+ .long sys_timer_getoverrun
-+ .long sys_timer_delete
-+ .long sys_clock_settime
-+ .long sys_clock_gettime /* 260 */
-+ .long sys_clock_getres
-+ .long sys_clock_nanosleep
-+ .long sys_statfs64
-+ .long sys_fstatfs64
-+ .long sys_tgkill /* 265 */
-+ .long sys_utimes
-+ .long sys_fadvise64_64
-+ .long sys_mbind
-+ .long sys_get_mempolicy
-+ .long sys_set_mempolicy /* 270 */
-+ .long sys_mq_open
-+ .long sys_mq_unlink
-+ .long sys_mq_timedsend
-+ .long sys_mq_timedreceive
-+ .long sys_mq_notify /* 275 */
-+ .long sys_mq_getsetattr
-+ .long sys_waitid
-+ .long sys_ni_syscall /* for sys_vserver */
-+ .long sys_add_key
-+ .long sys_request_key /* 280 */
-+ .long sys_keyctl
-+ .long sys_ioprio_set
-+ .long sys_ioprio_get
-+ .long sys_inotify_init
-+ .long sys_inotify_add_watch /* 285 */
-+ .long sys_inotify_rm_watch
-+ .long sys_migrate_pages
-+ .long sys_openat
-+ .long sys_mkdirat
-+ .long sys_mknodat /* 290 */
-+ .long sys_fchownat
-+ .long sys_futimesat
-+ .long sys_fstatat64
-+ .long sys_unlinkat
-+ .long sys_renameat /* 295 */
-+ .long sys_linkat
-+ .long sys_symlinkat
-+ .long sys_readlinkat
-+ .long sys_fchmodat
-+ .long sys_faccessat /* 300 */
-+ .long sys_ni_syscall /* Reserved for pselect6 */
-+ .long sys_ni_syscall /* Reserved for ppoll */
-+ .long sys_unshare
-+ .long sys_set_robust_list
-+ .long sys_get_robust_list /* 305 */
-+ .long sys_splice
-+ .long sys_sync_file_range
-+ .long sys_tee
-+ .long sys_vmsplice
-+ .long sys_move_pages /* 310 */
-+ .long sys_sched_setaffinity
-+ .long sys_sched_getaffinity
-+ .long sys_kexec_load
-+ .long sys_getcpu
-+ .long sys_epoll_pwait /* 315 */
-+ .long sys_utimensat
-+ .long sys_signalfd
-+ .long sys_timerfd_create
-+ .long sys_eventfd
-+ .long sys_fallocate /* 320 */
-+ .long sys_timerfd_settime
-+ .long sys_timerfd_gettime
-+ .long sys_signalfd4
-+ .long sys_eventfd2
-+ .long sys_epoll_create1 /* 325 */
-+ .long sys_dup3
-+ .long sys_pipe2
-+ .long sys_inotify_init1
-+ .long sys_preadv
-+ .long sys_pwritev /* 330 */
-+ .long sys_rt_tgsigqueueinfo
-+ .long sys_perf_event_open
-+ .long sys_get_thread_area
-+ .long sys_set_thread_area
-+ .long sys_atomic_cmpxchg_32 /* 335 */
-+ .long sys_atomic_barrier
-+ .long sys_fanotify_init
-+ .long sys_fanotify_mark
-+ .long sys_prlimit64
---- /dev/null
-+++ b/arch/m68k/coldfire/common/head.S
-@@ -0,0 +1,466 @@
-+/*
-+ * head.S is the MMU enabled ColdFire specific initial boot code
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ * Kurt Mahan kmahan@freescale.com
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Parts of this code came from arch/m68k/kernel/head.S
-+ */
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <asm/bootinfo.h>
-+#include <asm/setup.h>
-+#include <asm/entry.h>
-+#include <asm/pgtable.h>
-+#include <asm/page.h>
-+#include <asm/coldfire.h>
-+#include <asm/cfcache.h>
-+
-+#define DEBUG
-+
-+.globl kernel_pg_dir
-+.globl availmem
-+.globl set_context
-+.globl set_fpga
-+
-+#ifdef DEBUG
-+/* When debugging use readable names for labels */
-+#ifdef __STDC__
-+#define L(name) .head.S.##name
-+#else
-+#define L(name) .head.S./**/name
-+#endif
-+#else
-+#ifdef __STDC__
-+#define L(name) .L##name
-+#else
-+#define L(name) .L/**/name
-+#endif
-+#endif
-+
-+/* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */
-+#ifndef __INITDATA
-+#define __INITDATA .data
-+#define __FINIT .previous
-+#endif
-+
-+/*
-+ * Kernel mapped to physical ram address.
-+ *
-+ * M5445x:
-+ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs
-+ * Data[1]: 0x40000000 -> 0x4FFFFFFF SDRAM - cached
-+ * Code[0]: Not Mapped
-+ * Code[1]: 0x40000000 -> 0x4FFFFFFF SDRAM - cached
-+ *
-+ * M547x/M548x
-+ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs
-+ * Data[1]: 0x00000000 -> 0x0FFFFFFF SDRAM - uncached
-+ * Code[0]: Not Mapped
-+ * Code[1]: 0x00000000 -> 0x0FFFFFFF SDRAM - cached
-+ *
-+ * M5441X:
-+ * Data[0]: 0xE0000000 -> 0xFFFFFFFF System regs
-+ * Data[1]: 0x40000000 -> 0x4FFFFFFF SDRAM - cached
-+ * Code[0]: Not Mapped
-+ * Code[1]: 0x40000000 -> 0x4FFFFFFF SDRAM - cached
-+ */
-+#if defined(CONFIG_M5445X)
-+#define ACR0_DEFAULT #0xF00FA048 /* System Regs uncached/precise */
-+#define ACR1_DEFAULT #0x400FA028 /* SDRAM cached/copyback */
-+#define ACR2_DEFAULT #0x00000000 /* Not mapped */
-+#define ACR3_DEFAULT #0x400FA028 /* SDRAM cached/copyback */
-+#elif defined(CONFIG_M547X_8X)
-+#define ACR0_DEFAULT #0xF00FA048 /* System Regs */
-+#define ACR1_DEFAULT #0x000FA028 /* SDRAM cached/copy-back */
-+#define ACR2_DEFAULT #0x00000000 /* Not mapped */
-+#define ACR3_DEFAULT #0x000FA028 /* Instruction cached/copy-back */
-+#elif defined(CONFIG_M5441X)
-+#define ACR0_DEFAULT #0xE01FA048 /* System Regs */
-+#define ACR1_DEFAULT #0x400FA028 /* SDRAM cached/copyback */
-+#define ACR4_DEFAULT #0x00000000 /* Not mapped */
-+#define ACR5_DEFAULT #0x00000000 /* Not mapped */
-+#define ACR2_DEFAULT #0x00000000 /* Not mapped */
-+#define ACR3_DEFAULT #0x400FA028 /* Instruction cached/copy-back */
-+#define ACR6_DEFAULT #0x00000000 /* Not mapped */
-+#define ACR7_DEFAULT #0x00000000 /* Not mapped */
-+#endif
-+
-+/* ACR mapping for FPGA (maps 0) */
-+#define ACR0_FPGA #0x000FA048 /* ACR0 enable FPGA */
-+
-+/* Several macros to make the writing of subroutines easier:
-+ * - func_start marks the beginning of the routine which setups the frame
-+ * register and saves the registers, it also defines another macro
-+ * to automatically restore the registers again.
-+ * - func_return marks the end of the routine and simply calls the prepared
-+ * macro to restore registers and jump back to the caller.
-+ * - func_define generates another macro to automatically put arguments
-+ * onto the stack call the subroutine and cleanup the stack again.
-+ */
-+
-+.macro load_symbol_address symbol,register
-+ movel #\symbol,\register
-+.endm
-+
-+.macro func_start name,saveregs,savesize,stack=0
-+L(\name):
-+ linkw %a6,#-\stack
-+ subal #(\savesize),%sp
-+ moveml \saveregs,%sp@
-+.set stackstart,-\stack
-+
-+.macro func_return_\name
-+ moveml %sp@,\saveregs
-+ addal #(\savesize),%sp
-+ unlk %a6
-+ rts
-+.endm
-+.endm
-+
-+.macro func_return name
-+ func_return_\name
-+.endm
-+
-+.macro func_call name
-+ jbsr L(\name)
-+.endm
-+
-+.macro move_stack nr,arg1,arg2,arg3,arg4
-+.if \nr
-+ move_stack "(\nr-1)",\arg2,\arg3,\arg4
-+ movel \arg1,%sp@-
-+.endif
-+.endm
-+
-+.macro func_define name,nr=0
-+.macro \name arg1,arg2,arg3,arg4
-+ move_stack \nr,\arg1,\arg2,\arg3,\arg4
-+ func_call \name
-+.if \nr
-+ lea %sp@(\nr*4),%sp
-+.endif
-+.endm
-+.endm
-+
-+func_define serial_putc,1
-+
-+.macro putc ch
-+ pea \ch
-+ func_call serial_putc
-+ addql #4,%sp
-+.endm
-+
-+.macro dputc ch
-+#ifdef DEBUG
-+ putc \ch
-+#endif
-+.endm
-+
-+func_define putn,1
-+
-+.macro dputn nr
-+#ifdef DEBUG
-+ putn \nr
-+#endif
-+.endm
-+
-+/*
-+ mmu_map - creates a new TLB entry
-+
-+ virt_addr Must be on proper boundary
-+ phys_addr Must be on proper boundary
-+ itlb MMUOR_ITLB if instruction TLB or 0
-+ asid address space ID
-+ shared_global MMUTR_SG if shared between different ASIDs or 0
-+ size_code MMUDR_SZ1M 1 MB
-+ MMUDR_SZ4K 4 KB
-+ MMUDR_SZ8K 8 KB
-+ MMUDR_SZ16M 16 MB
-+ cache_mode MMUDR_INC instruction non-cacheable
-+ MMUDR_IC instruction cacheable
-+ MMUDR_DWT data writethrough
-+ MMUDR_DCB data copyback
-+ MMUDR_DNCP data non-cacheable, precise
-+ MMUDR_DNCIP data non-cacheable, imprecise
-+ super_prot MMUDR_SP if user mode generates exception or 0
-+ readable MMUDR_R if permits read access (data TLB) or 0
-+ writable MMUDR_W if permits write access (data TLB) or 0
-+ executable MMUDR_X if permits execute access (instruction TLB) or 0
-+ locked MMUDR_LK prevents TLB entry from being replaced or 0
-+ temp_data_reg a data register to use for temporary values
-+*/
-+.macro mmu_map virt_addr,phys_addr,itlb,asid,shared_global,size_code, \
-+ cache_mode,super_prot,readable,writable,executable,locked,temp_data_reg
-+ /* Set up search of TLB. */
-+ movel #(\virt_addr+1), \temp_data_reg
-+ movel \temp_data_reg, MMUAR
-+ /* Search. */
-+ movel #(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg
-+ movew \temp_data_reg, (MMUOR)
-+ /* Set up tag value. */
-+ movel #(\virt_addr + \asid + \shared_global + MMUTR_V), \temp_data_reg
-+ movel \temp_data_reg, MMUTR
-+ /* Set up data value. */
-+ movel #(\phys_addr + \size_code + \cache_mode + \super_prot + \
-+ \readable + \writable + \executable + \locked), \temp_data_reg
-+ movel \temp_data_reg, MMUDR
-+ /* Save it. */
-+ movel #(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg
-+ movew \temp_data_reg, (MMUOR)
-+.endm /* mmu_map */
-+
-+.macro mmu_unmap virt_addr,itlb,temp_data_reg
-+ /* Set up search of TLB. */
-+ movel #(\virt_addr+1), \temp_data_reg
-+ movel \temp_data_reg, MMUAR
-+ /* Search. */
-+ movel #(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg
-+ movew \temp_data_reg, (MMUOR)
-+ /* Test for hit. */
-+ movel MMUSR,\temp_data_reg
-+ btst #MMUSR_HITN,\temp_data_reg
-+ beq 1f
-+ /* Read the TLB. */
-+ movel #(MMUOR_RW + MMUOR_ACC +\itlb), \temp_data_reg
-+ movew \temp_data_reg, (MMUOR)
-+ movel MMUSR,\temp_data_reg
-+ /* Set up tag value. */
-+ movel #0, \temp_data_reg
-+ movel \temp_data_reg, MMUTR
-+ /* Set up data value. */
-+ movel #0, \temp_data_reg
-+ movel \temp_data_reg, MMUDR
-+ /* Save it. */
-+ movel #(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg
-+ movew \temp_data_reg, (MMUOR)
-+1:
-+.endm /* mmu_unmap */
-+
-+/* .text */
-+.section ".text.head","ax"
-+ENTRY(_stext)
-+/* Version numbers of the bootinfo interface -- if we later pass info
-+ * from boot ROM we might want to put something real here.
-+ *
-+ * The area from _stext to _start will later be used as kernel pointer table
-+ */
-+ bras 1f /* Jump over bootinfo version numbers */
-+
-+ .long BOOTINFOV_MAGIC
-+ .long 0
-+1: jmp __start
-+
-+.equ kernel_pg_dir,_stext
-+.equ .,_stext+0x1000
-+
-+ENTRY(_start)
-+ jra __start
-+__INIT
-+ENTRY(__start)
-+/* Save the location of u-boot info - cmd line, bd_info, etc. */
-+ movel %a7,%a4 /* Don't use %a4 before cf_early_init */
-+ addl #0x00000004,%a4 /* offset past top */
-+ addl #(PAGE_OFFSET-CONFIG_SDRAM_BASE),%a4 /* high mem offset */
-+
-+/* Setup initial stack pointer */
-+ movel #CONFIG_SDRAM_BASE+0x1000,%sp
-+
-+/* Setup usp */
-+ subl %a0,%a0
-+ movel %a0,%usp
-+
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+#if defined(CONFIG_SRAM)
-+ movel #(CONFIG_SRAM_BASE+0x221), %d0
-+#else
-+ movel #0x80000000, %d0
-+#endif
-+
-+#ifdef CONFIG_M5441X
-+ movec %d0, %rambar
-+#else
-+ movec %d0, %rambar1
-+#endif
-+#elif defined(CONFIG_M547X_8X)
-+ movel #MCF_MBAR, %d0
-+ movec %d0, %mbar
-+ move.l #(MCF_RAMBAR0 + 0x21), %d0
-+ movec %d0, %rambar0
-+ move.l #(MCF_RAMBAR1 + 0x21), %d0
-+ movec %d0, %rambar1
-+#endif
-+
-+ movew #0x2700,%sr
-+
-+/* reset cache */
-+ movel #(CF_CACR_ICINVA + CF_CACR_DCINVA),%d0
-+ movecl %d0,%cacr
-+
-+ movel #(MMU_BASE+1),%d0
-+ movecl %d0,%mmubar
-+ movel #MMUOR_CA,%a0 /* Clear tlb entries */
-+ movew %a0,(MMUOR)
-+ movel #(MMUOR_CA + MMUOR_ITLB),%a0 /* Use ITLB for searches */
-+ movew %a0,(MMUOR)
-+ movel #0,%a0 /* Clear Addr Space User ID */
-+ movecl %a0,%asid
-+
-+/* setup ACRs */
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X) || defined(CONFIG_M5441X)
-+ movel ACR0_DEFAULT, %d0 /* ACR0 (DATA) setup */
-+ movec %d0, %acr0
-+ nop
-+ movel ACR1_DEFAULT, %d0 /* ACR1 (DATA) setup */
-+ movec %d0, %acr1
-+ nop
-+ movel ACR2_DEFAULT, %d0 /* ACR2 (CODE) setup */
-+ movec %d0, %acr2
-+ nop
-+ movel ACR3_DEFAULT, %d0 /* ACR3 (CODE) setup */
-+ movec %d0, %acr3
-+ nop
-+#endif
-+ /* Turn on MMU */
-+ movel #(MMUCR_EN),%a0
-+ movel %a0,MMUCR
-+ nop /* This synchs the pipeline after a write to MMUCR */
-+
-+ movel #__running_high,%a0 /* Get around PC-relative addressing. */
-+ jmp %a0@
-+
-+ENTRY(__running_high)
-+ load_symbol_address _stext,%sp
-+ movel L(memory_start),%a0
-+ movel %a0,availmem
-+ load_symbol_address L(phys_kernel_start),%a0
-+ load_symbol_address _stext,%a1
-+ subl #_stext,%a1
-+ addl #PAGE_OFFSET,%a1
-+ movel %a1,%a0@
-+
-+/* zero bss */
-+ lea _sbss,%a0
-+ lea _ebss,%a1
-+ clrl %d0
-+_loop_bss:
-+ movel %d0,(%a0)+
-+ cmpl %a0,%a1
-+ bne _loop_bss
-+
-+/* create dma memory mirror TLB mapping */
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+ mmu_map CONFIG_DMA_BASE, \
-+ CONFIG_SDRAM_BASE, 0, 0, \
-+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+ 0, MMUDR_LK, %d0
-+#elif defined(CONFIG_M547X_8X)
-+ mmu_map (CONFIG_DMA_BASE + 0*1024*1024), \
-+ (CONFIG_SDRAM_BASE + 0*1024*1024), 0, 0, \
-+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+ MMUDR_W, 0, MMUDR_LK, %d0
-+ mmu_map (CONFIG_DMA_BASE + 1*1024*1024), \
-+ (CONFIG_SDRAM_BASE + 1*1024*1024), 0, 0, \
-+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+ MMUDR_W, 0, MMUDR_LK, %d0
-+ mmu_map (CONFIG_DMA_BASE + 2*1024*1024), \
-+ (CONFIG_SDRAM_BASE + 2*1024*1024), 0, 0, \
-+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+ MMUDR_W, 0, MMUDR_LK, %d0
-+ mmu_map (CONFIG_DMA_BASE + 3*1024*1024), \
-+ (CONFIG_SDRAM_BASE + 3*1024*1024), 0, 0, \
-+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+ MMUDR_W, 0, MMUDR_LK, %d0
-+ mmu_map (CONFIG_DMA_BASE + 4*1024*1024), \
-+ (CONFIG_SDRAM_BASE + 4*1024*1024), 0, 0, \
-+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+ MMUDR_W, 0, MMUDR_LK, %d0
-+ mmu_map (CONFIG_DMA_BASE + 5*1024*1024), \
-+ (CONFIG_SDRAM_BASE + 5*1024*1024), 0, 0, \
-+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+ MMUDR_W, 0, MMUDR_LK, %d0
-+ mmu_map (CONFIG_DMA_BASE + 6*1024*1024), \
-+ (CONFIG_SDRAM_BASE + 6*1024*1024), 0, 0, \
-+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+ MMUDR_W, 0, MMUDR_LK, %d0
-+ mmu_map (CONFIG_DMA_BASE + 7*1024*1024), \
-+ (CONFIG_SDRAM_BASE + 7*1024*1024), 0, 0, \
-+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+ MMUDR_W, 0, MMUDR_LK, %d0
-+#endif
-+
-+/* Setup initial stack pointer */
-+ lea init_task,%a2
-+ lea init_thread_union+THREAD_SIZE,%sp
-+ subl %a6,%a6 /* clear a6 for gdb */
-+
-+#ifdef CONFIG_MCF_USER_HALT
-+/* Setup debug control reg to allow halts from user space */
-+ lea wdbg_uhe,%a0
-+ wdebug (%a0)
-+#endif
-+
-+ movel %a4,uboot_info_stk /* save uboot info to variable */
-+ jsr cf_early_init
-+ jmp start_kernel
-+
-+.section ".text.head","ax"
-+set_context:
-+func_start set_context,%d0,(1*4)
-+ movel 12(%sp),%d0
-+ movec %d0,%asid
-+func_return set_context
-+
-+#ifdef CONFIG_M54455
-+/*
-+ * set_fpga(addr,val) on the M5445X
-+ *
-+ * Map in 0x00000000 -> 0x0fffffff and then do the write.
-+ */
-+set_fpga:
-+ movew %sr,%d1
-+ movew #0x2700,%sr
-+ movel ACR0_FPGA, %d0
-+ movec %d0, %acr0
-+ nop
-+ moveal 4(%sp),%a0
-+ movel 8(%sp),%a0@
-+ movel ACR0_DEFAULT, %d0
-+ movec %d0, %acr0
-+ nop
-+ movew %d1,%sr
-+ rts
-+#endif
-+
-+ .data
-+ .align 4
-+
-+availmem:
-+ .long 0
-+L(phys_kernel_start):
-+ .long PAGE_OFFSET
-+L(kernel_end):
-+ .long 0
-+L(memory_start):
-+ .long PAGE_OFFSET_RAW
-+
-+#ifdef CONFIG_MCF_USER_HALT
-+/*
-+ * Enable User Halt Enable in the debug control register.
-+ */
-+wdbg_uhe:
-+ .word 0x2c80 /* DR0 */
-+ .word 0x00b0 /* 31:16 */
-+ .word 0x0400 /* 15:0 -- enable UHE */
-+ .word 0x0000 /* unused */
-+#endif
-+
-+
---- /dev/null
-+++ b/arch/m68k/coldfire/common/ints.c
-@@ -0,0 +1,544 @@
-+/*
-+ * linux/arch/m68k/coldfire/ints.c -- General interrupt handling code
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ * Kurt Mahan kmahan@freescale.com
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * Based on:
-+ * linux/arch/m68k/kernel/ints.c &
-+ * linux/arch/m68knommu/5307/ints.c
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/errno.h>
-+#include <linux/seq_file.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/system.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+#include <asm/page.h>
-+#include <asm/machdep.h>
-+#include <asm/irq_regs.h>
-+
-+#include <asm/mcfsim.h>
-+
-+/*
-+ * IRQ Handler lists.
-+ */
-+static struct irq_node *irq_list[SYS_IRQS];
-+static struct irq_controller *irq_controller[SYS_IRQS];
-+static int irq_depth[SYS_IRQS];
-+
-+#define POOL_SIZE SYS_IRQS
-+static struct irq_node pool[POOL_SIZE];
-+static struct irq_node *get_irq_node(void);
-+
-+/* The number of spurious interrupts */
-+unsigned int num_spurious;
-+asmlinkage void handle_badint(struct pt_regs *regs);
-+
-+/*
-+ * process_int(unsigned long vec, struct pt_regs *fp)
-+ *
-+ * Process an interrupt. Called from entry.S.
-+ */
-+asmlinkage void process_int(unsigned long vec, struct pt_regs *fp)
-+{
-+ struct pt_regs *old_regs;
-+ struct irq_node *node;
-+ old_regs = set_irq_regs(fp);
-+ kstat_cpu(0).irqs[vec]++;
-+
-+ node = irq_list[vec];
-+ if (!node)
-+ handle_badint(fp);
-+ else {
-+ do {
-+ node->handler(vec, node->dev_id);
-+ node = node->next;
-+ } while (node);
-+ }
-+
-+ set_irq_regs(old_regs);
-+}
-+
-+/*
-+ * show_interrupts( struct seq_file *p, void *v)
-+ *
-+ * Called to show all the current interrupt information.
-+ */
-+int show_interrupts(struct seq_file *p, void *v)
-+{
-+ struct irq_controller *contr;
-+ struct irq_node *node;
-+ int i = *(loff_t *) v;
-+
-+ if ((i < NR_IRQS) && (irq_list[i])) {
-+ contr = irq_controller[i];
-+ node = irq_list[i];
-+ seq_printf(p, "%-8s %3u: %10u %s", contr->name, i,
-+ kstat_cpu(0).irqs[i], node->devname);
-+ while ((node = node->next))
-+ seq_printf(p, ", %s", node->devname);
-+
-+ seq_printf(p, "\n");
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * get_irq_node(void)
-+ *
-+ * Get an irq node from the pool.
-+ */
-+struct irq_node *get_irq_node(void)
-+{
-+ struct irq_node *p = pool;
-+ int i;
-+
-+ for (i = 0; i < POOL_SIZE; i++, p++) {
-+ if (!p->handler) {
-+ memset(p, 0, sizeof(struct irq_node));
-+ return p;
-+ }
-+ }
-+ printk(KERN_INFO "%s(%s:%d): No more irq nodes, I suggest you \
-+ increase POOL_SIZE", __func__, __FILE__, __LINE__);
-+ return NULL;
-+}
-+
-+void init_irq_proc(void)
-+{
-+ /* Insert /proc/irq driver here */
-+}
-+
-+int setup_irq(unsigned int irq, struct irq_node *node)
-+{
-+ struct irq_controller *contr;
-+ struct irq_node **prev;
-+ unsigned long flags;
-+
-+ if (irq >= NR_IRQS || !irq_controller[irq]) {
-+ printk("%s: Incorrect IRQ %d from %s\n",
-+ __func__, irq, node->devname);
-+ return -ENXIO;
-+ }
-+
-+ contr = irq_controller[irq];
-+ spin_lock_irqsave(&contr->lock, flags);
-+
-+ prev = irq_list + irq;
-+ if (*prev) {
-+ /* Can't share interrupts unless both agree to */
-+ if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
-+ spin_unlock_irqrestore(&contr->lock, flags);
-+ printk(KERN_INFO "%s: -BUSY-Incorrect IRQ %d\n",
-+ __func__, irq);
-+ return -EBUSY;
-+ }
-+ while (*prev)
-+ prev = &(*prev)->next;
-+ }
-+
-+ if (!irq_list[irq]) {
-+ if (contr->startup)
-+ contr->startup(irq);
-+ else
-+ contr->enable(irq);
-+ }
-+ node->next = NULL;
-+ *prev = node;
-+
-+ spin_unlock_irqrestore(&contr->lock, flags);
-+
-+ return 0;
-+}
-+
-+int request_irq(unsigned int irq,
-+ irq_handler_t handler,
-+ unsigned long flags, const char *devname, void *dev_id)
-+{
-+ struct irq_node *node = get_irq_node();
-+ int res;
-+
-+ if (!node) {
-+ printk(KERN_INFO "%s:get_irq_node error %x\n",
-+ __func__, (unsigned int) node);
-+ return -ENOMEM;
-+ }
-+ node->handler = handler;
-+ node->flags = flags;
-+ node->dev_id = dev_id;
-+ node->devname = devname;
-+
-+ res = setup_irq(irq, node);
-+ if (res)
-+ node->handler = NULL;
-+
-+ return res;
-+}
-+EXPORT_SYMBOL(request_irq);
-+
-+void free_irq(unsigned int irq, void *dev_id)
-+{
-+ struct irq_controller *contr;
-+ struct irq_node **p, *node;
-+ unsigned long flags;
-+
-+ if (irq >= NR_IRQS || !irq_controller[irq]) {
-+ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __func__, irq);
-+ return;
-+ }
-+
-+ contr = irq_controller[irq];
-+ spin_lock_irqsave(&contr->lock, flags);
-+
-+ p = irq_list + irq;
-+ while ((node = *p)) {
-+ if (node->dev_id == dev_id)
-+ break;
-+ p = &node->next;
-+ }
-+
-+ if (node) {
-+ *p = node->next;
-+ node->handler = NULL;
-+ } else
-+ printk(KERN_DEBUG "%s: Removing probably wrong IRQ %d\n",
-+ __func__, irq);
-+
-+ if (!irq_list[irq]) {
-+ if (contr->shutdown)
-+ contr->shutdown(irq);
-+ else
-+ contr->disable(irq);
-+ }
-+
-+ spin_unlock_irqrestore(&contr->lock, flags);
-+}
-+EXPORT_SYMBOL(free_irq);
-+
-+void enable_irq(unsigned int irq)
-+{
-+ struct irq_controller *contr;
-+ unsigned long flags;
-+
-+ if (irq >= NR_IRQS || !irq_controller[irq]) {
-+ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __func__, irq);
-+ return;
-+ }
-+
-+ contr = irq_controller[irq];
-+ spin_lock_irqsave(&contr->lock, flags);
-+ if (irq_depth[irq]) {
-+ if (!--irq_depth[irq]) {
-+ if (contr->enable)
-+ contr->enable(irq);
-+ }
-+ } else
-+ WARN_ON(1);
-+ spin_unlock_irqrestore(&contr->lock, flags);
-+}
-+EXPORT_SYMBOL(enable_irq);
-+
-+void disable_irq(unsigned int irq)
-+{
-+ struct irq_controller *contr;
-+ unsigned long flags;
-+
-+ if (irq >= NR_IRQS || !irq_controller[irq]) {
-+ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __func__, irq);
-+ return;
-+ }
-+
-+ contr = irq_controller[irq];
-+ spin_lock_irqsave(&contr->lock, flags);
-+ if (!irq_depth[irq]++) {
-+ if (contr->disable)
-+ contr->disable(irq);
-+ }
-+ spin_unlock_irqrestore(&contr->lock, flags);
-+}
-+EXPORT_SYMBOL(disable_irq);
-+
-+void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
-+EXPORT_SYMBOL(disable_irq_nosync);
-+
-+
-+unsigned long probe_irq_on(void)
-+{
-+ return 0;
-+}
-+EXPORT_SYMBOL(probe_irq_on);
-+
-+int probe_irq_off(unsigned long irqs)
-+{
-+ return 0;
-+}
-+EXPORT_SYMBOL(probe_irq_off);
-+
-+asmlinkage void handle_badint(struct pt_regs *regs)
-+{
-+ kstat_cpu(0).irqs[0]++;
-+ num_spurious++;
-+ printk(KERN_DEBUG "unexpected interrupt from %u\n", regs->vector);
-+}
-+EXPORT_SYMBOL(handle_badint);
-+
-+unsigned int irq_canonicalize(unsigned int irq)
-+{
-+#ifdef CONFIG_Q40
-+ if (MACH_IS_Q40 && irq == 11)
-+ irq = 10;
-+#endif
-+ return irq;
-+}
-+EXPORT_SYMBOL(irq_canonicalize);
-+
-+#ifdef CONFIG_M5445X
-+/*
-+ * M5445X Implementation
-+ */
-+void m5445x_irq_enable(unsigned int irq)
-+{
-+ /* enable the interrupt hardware */
-+ if (irq < 64)
-+ return;
-+
-+ /* adjust past non-hardware ints */
-+ irq -= 64;
-+
-+ /* check for eport */
-+ if ((irq > 0) && (irq < 8)) {
-+ /* enable eport */
-+ MCF_EPORT_EPPAR &= ~(3 << (irq*2)); /* level */
-+ MCF_EPORT_EPDDR &= ~(1 << irq); /* input */
-+ MCF_EPORT_EPIER |= 1 << irq; /* irq enabled */
-+ }
-+
-+ if (irq < 64) {
-+ /* controller 0 */
-+ MCF_INTC0_ICR(irq) = 0x02;
-+ MCF_INTC0_CIMR = irq;
-+ } else {
-+ /* controller 1 */
-+ irq -= 64;
-+ MCF_INTC1_ICR(irq) = 0x02;
-+ MCF_INTC1_CIMR = irq;
-+ }
-+}
-+
-+void m5445x_irq_disable(unsigned int irq)
-+{
-+ /* disable the interrupt hardware */
-+ if (irq < 64)
-+ return;
-+
-+ /* adjust past non-hardware ints */
-+ irq -= 64;
-+
-+ /* check for eport */
-+ if ((irq > 0) && (irq < 8)) {
-+ /* disable eport */
-+ MCF_EPORT_EPIER &= ~(1 << irq);
-+ }
-+
-+ if (irq < 64) {
-+ /* controller 0 */
-+ MCF_INTC0_ICR(irq) = 0x00;
-+ MCF_INTC0_SIMR = irq;
-+ } else {
-+ /* controller 1 */
-+ irq -= 64;
-+ MCF_INTC1_ICR(irq) = 0x00;
-+ MCF_INTC1_SIMR = irq;
-+ }
-+}
-+#elif defined(CONFIG_M547X_8X)
-+/*
-+ * M547X_8X Implementation
-+ */
-+void m547x_8x_irq_enable(unsigned int irq)
-+{
-+ /* enable the interrupt hardware */
-+ if (irq < 64)
-+ return;
-+
-+ /* adjust past non-hardware ints */
-+ irq -= 64;
-+
-+ /* check for eport */
-+ if ((irq > 0) && (irq < 8)) {
-+ /* enable eport */
-+ MCF_EPPAR &= ~(3 << (irq*2));
-+ /* level */
-+ MCF_EPDDR &= ~(1 << irq);
-+ /* input */
-+ MCF_EPIER |= 1 << irq;
-+ /* irq enabled */
-+ }
-+
-+ if (irq < 32) {
-+ /* *grumble* don't set low bit of IMRL */
-+ MCF_IMRL &= (~(1 << irq) & 0xfffffffe);
-+ } else {
-+ MCF_IMRH &= ~(1 << (irq - 32));
-+ }
-+}
-+
-+void m547x_8x_irq_disable(unsigned int irq)
-+{
-+ /* disable the interrupt hardware */
-+ if (irq < 64)
-+ return;
-+
-+ /* adjust past non-hardware ints */
-+ irq -= 64;
-+
-+ /* check for eport */
-+ if ((irq > 0) && (irq < 8)) {
-+ /* disable eport */
-+ MCF_EPIER &= ~(1 << irq);
-+ }
-+
-+ if (irq < 32)
-+ MCF_IMRL |= (1 << irq);
-+ else
-+ MCF_IMRH |= (1 << (irq - 32));
-+}
-+
-+#elif defined(CONFIG_M5441X)
-+/*
-+ * M5441X Implementation
-+ */
-+void m5441x_irq_enable(unsigned int irq)
-+{
-+ /* enable the interrupt hardware */
-+ if (irq < 64)
-+ return;
-+
-+ /* adjust past non-hardware ints */
-+ irq -= 64;
-+
-+ /* check for eport */
-+ if ((irq > 0) && (irq < 8)) {
-+ /* enable eport */
-+ MCF_EPORT_EPPAR &= ~(3 << (irq*2)); /* level */
-+ MCF_EPORT_EPIER |= 1 << irq; /* irq enabled */
-+ }
-+
-+ if (irq < 64) {
-+ /* controller 0 */
-+ MCF_INTC0_ICR(irq) = 0x02;
-+ MCF_INTC0_CIMR = irq;
-+ } else if (irq >= 64 && irq < 128) {
-+ /* controller 1 */
-+ irq -= 64;
-+ MCF_INTC1_ICR(irq) = 0x02;
-+ MCF_INTC1_CIMR = irq;
-+ } else if (irq >= 128 && irq < 192) {
-+ /* controller 2 */
-+ irq -= 128;
-+ MCF_INTC2_ICR(irq) = 0x02;
-+ MCF_INTC2_CIMR = irq;
-+ } else {
-+ /* invalid irq number */
-+ return;
-+ }
-+}
-+
-+void m5441x_irq_disable(unsigned int irq)
-+{
-+ /* disable the interrupt hardware */
-+ if (irq < 64)
-+ return;
-+
-+ /* adjust past non-hardware ints */
-+ irq -= 64;
-+
-+ /* check for eport */
-+ if ((irq > 0) && (irq < 8)) {
-+ /* disable eport */
-+ MCF_EPORT_EPIER &= ~(1 << irq);
-+ }
-+
-+ if (irq < 64) {
-+ /* controller 0 */
-+ MCF_INTC0_ICR(irq) = 0x00;
-+ MCF_INTC0_SIMR = irq;
-+ } else if (irq >= 64 && irq < 128) {
-+ /* controller 1 */
-+ irq -= 64;
-+ MCF_INTC1_ICR(irq) = 0x00;
-+ MCF_INTC1_SIMR = irq;
-+ } else if (irq >= 128 && irq < 192) {
-+ /* controller 2 */
-+ irq -= 128;
-+ MCF_INTC2_ICR(irq) = 0x00;
-+ MCF_INTC2_SIMR = irq;
-+ }
-+}
-+#endif
-+
-+/*
-+ * IRQ Controller
-+ */
-+#if defined(CONFIG_M5445X)
-+static struct irq_controller m5445x_irq_controller = {
-+ .name = "M5445X",
-+ .lock = __SPIN_LOCK_UNLOCKED(m5445x_irq_controller.lock),
-+ .enable = m5445x_irq_enable,
-+ .disable = m5445x_irq_disable,
-+};
-+#elif defined(CONFIG_M547X_8X)
-+static struct irq_controller m547x_8x_irq_controller = {
-+ .name = "M547X_8X",
-+ .lock = __SPIN_LOCK_UNLOCKED(m547x_8x_irq_controller.lock),
-+ .enable = m547x_8x_irq_enable,
-+ .disable = m547x_8x_irq_disable,
-+};
-+#elif defined(CONFIG_M5441X)
-+static struct irq_controller m5441x_irq_controller = {
-+ .name = "M5441X",
-+ .lock = __SPIN_LOCK_UNLOCKED(m5441x_irq_controller.lock),
-+ .enable = m5441x_irq_enable,
-+ .disable = m5441x_irq_disable,
-+};
-+#else
-+# error No IRQ controller defined
-+#endif
-+
-+/*
-+ * void init_IRQ(void)
-+ *
-+ * This function should be called during kernel startup to initialize
-+ * the IRQ handling routines.
-+ */
-+void __init init_IRQ(void)
-+{
-+ int i;
-+
-+#if defined(CONFIG_M5445X)
-+ for (i = 0; i < SYS_IRQS; i++)
-+ irq_controller[i] = &m5445x_irq_controller;
-+#elif defined(CONFIG_M547X_8X)
-+ for (i = 0; i < SYS_IRQS; i++)
-+ irq_controller[i] = &m547x_8x_irq_controller;
-+#elif defined(CONFIG_M5441X)
-+ for (i = 0; i < SYS_IRQS; i++)
-+ irq_controller[i] = &m5441x_irq_controller;
-+#endif
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/common/muldi3.S
-@@ -0,0 +1,73 @@
-+/*
-+ * Coldfire muldi3 assembly verion
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/linkage.h>
-+.globl __muldi3
-+
-+ENTRY(__muldi3)
-+ linkw %fp,#0
-+ lea %sp@(-32),%sp
-+ moveml %d2-%d7/%a2-%a3,%sp@
-+ moveal %fp@(8), %a2
-+ moveal %fp@(12), %a3
-+ moveal %fp@(16), %a0
-+ moveal %fp@(20),%a1
-+ movel %a3,%d2
-+ andil #65535,%d2
-+ movel %a3,%d3
-+ clrw %d3
-+ swap %d3
-+ movel %a1,%d0
-+ andil #65535,%d0
-+ movel %a1,%d1
-+ clrw %d1
-+ swap %d1
-+ movel %d2,%d7
-+ mulsl %d0,%d7
-+ movel %d2,%d4
-+ mulsl %d1,%d4
-+ movel %d3,%d2
-+ mulsl %d0,%d2
-+ mulsl %d1,%d3
-+ movel %d7,%d0
-+ clrw %d0
-+ swap %d0
-+ addl %d0,%d4
-+ addl %d2,%d4
-+ cmpl %d4,%d2
-+ blss 1f
-+ addil #65536,%d3
-+1:
-+ movel %d4,%d0
-+ clrw %d0
-+ swap %d0
-+ movel %d3,%d5
-+ addl %d0,%d5
-+ movew %d4,%d6
-+ swap %d6
-+ movew %d7,%d6
-+ movel %d5,%d0
-+ movel %d6,%d1
-+ movel %a3,%d2
-+ movel %a0,%d3
-+ mulsl %d3,%d2
-+ movel %a2,%d3
-+ movel %a1,%d4
-+ mulsl %d4,%d3
-+ addl %d3,%d2
-+ movel %d2,%d0
-+ addl %d5,%d0
-+ moveml %sp@, %d2-%d7/%a2-%a3
-+ lea %sp@(32),%sp
-+ unlk %fp
-+ rts
---- /dev/null
-+++ b/arch/m68k/coldfire/common/signal.c
-@@ -0,0 +1,991 @@
-+/*
-+ * linux/arch/m68k/kernel/signal.c
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ *
-+ * Derived from m68k/kernel/signal.c and the original authors are credited
-+ * there.
-+ */
-+
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/kernel.h>
-+#include <linux/signal.h>
-+#include <linux/syscalls.h>
-+#include <linux/errno.h>
-+#include <linux/wait.h>
-+#include <linux/ptrace.h>
-+#include <linux/unistd.h>
-+#include <linux/stddef.h>
-+#include <linux/highuid.h>
-+#include <linux/personality.h>
-+#include <linux/tty.h>
-+#include <linux/binfmts.h>
-+
-+#include <asm/setup.h>
-+#include <asm/uaccess.h>
-+#include <asm/cf_pgtable.h>
-+#include <asm/traps.h>
-+#include <asm/ucontext.h>
-+#include <asm/cacheflush.h>
-+
-+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-+
-+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs);
-+
-+const int frame_extra_sizes[16] = {
-+ [1] = -1,
-+ [2] = -1,
-+ [3] = -1,
-+ [4] = 0,
-+ [5] = 1,
-+ [6] = 1,
-+ [7] = 2,
-+ [8] = 3,
-+ [9] = -1,
-+ [10] = -1,
-+ [11] = -1,
-+ [12] = -1,
-+ [13] = -1,
-+ [14] = -1,
-+ [15] = -1,
-+};
-+
-+/*
-+ * Atomically swap in the new signal mask, and wait for a signal.
-+ */
-+asmlinkage int do_sigsuspend(struct pt_regs *regs)
-+{
-+ old_sigset_t mask = regs->d3;
-+ sigset_t saveset;
-+
-+ mask &= _BLOCKABLE;
-+ spin_lock_irq(&current->sighand->siglock);
-+ saveset = current->blocked;
-+ siginitset(&current->blocked, mask);
-+ recalc_sigpending();
-+ spin_unlock_irq(&current->sighand->siglock);
-+
-+ regs->d0 = -EINTR;
-+ while (1) {
-+ current->state = TASK_INTERRUPTIBLE;
-+ schedule();
-+ if (do_signal(&saveset, regs))
-+ return -EINTR;
-+ }
-+}
-+
-+asmlinkage int
-+do_rt_sigsuspend(struct pt_regs *regs)
-+{
-+ sigset_t __user *unewset = (sigset_t __user *)regs->d1;
-+ size_t sigsetsize = (size_t)regs->d2;
-+ sigset_t saveset, newset;
-+
-+ /* XXX: Don't preclude handling different sized sigset_t's. */
-+ if (sigsetsize != sizeof(sigset_t))
-+ return -EINVAL;
-+
-+ if (copy_from_user(&newset, unewset, sizeof(newset)))
-+ return -EFAULT;
-+ sigdelsetmask(&newset, ~_BLOCKABLE);
-+
-+ spin_lock_irq(&current->sighand->siglock);
-+ saveset = current->blocked;
-+ current->blocked = newset;
-+ recalc_sigpending();
-+ spin_unlock_irq(&current->sighand->siglock);
-+
-+ regs->d0 = -EINTR;
-+ while (1) {
-+ current->state = TASK_INTERRUPTIBLE;
-+ schedule();
-+ if (do_signal(&saveset, regs))
-+ return -EINTR;
-+ }
-+}
-+
-+asmlinkage int
-+sys_sigaction(int sig, const struct old_sigaction __user *act,
-+ struct old_sigaction __user *oact)
-+{
-+ struct k_sigaction new_ka, old_ka;
-+ int ret;
-+
-+ if (act) {
-+ old_sigset_t mask;
-+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-+ return -EFAULT;
-+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
-+ __get_user(mask, &act->sa_mask);
-+ siginitset(&new_ka.sa.sa_mask, mask);
-+ }
-+
-+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-+
-+ if (!ret && oact) {
-+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-+ return -EFAULT;
-+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-+ }
-+
-+ return ret;
-+}
-+
-+asmlinkage int
-+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
-+{
-+ return do_sigaltstack(uss, uoss, rdusp());
-+}
-+
-+
-+/*
-+ * Do a signal return; undo the signal stack.
-+ *
-+ * Keep the return code on the stack quadword aligned!
-+ * That makes the cache flush below easier.
-+ */
-+
-+struct sigframe {
-+ char __user *pretcode;
-+ int sig;
-+ int code;
-+ struct sigcontext __user *psc;
-+ char retcode[8];
-+ unsigned long extramask[_NSIG_WORDS-1];
-+ struct sigcontext sc;
-+};
-+
-+struct rt_sigframe {
-+ char __user *pretcode;
-+ int sig;
-+ struct siginfo __user *pinfo;
-+ void __user *puc;
-+ char retcode[8];
-+ struct siginfo info;
-+ struct ucontext uc;
-+};
-+
-+#define FPCONTEXT_SIZE 216
-+#define uc_fpstate uc_filler[0]
-+#define uc_formatvec uc_filler[FPCONTEXT_SIZE/4]
-+#define uc_extra uc_filler[FPCONTEXT_SIZE/4+1]
-+
-+#ifdef CONFIG_FPU
-+static unsigned char fpu_version; /* version num of fpu, set by setup_frame */
-+
-+static inline int restore_fpu_state(struct sigcontext *sc)
-+{
-+ int err = 1;
-+
-+ if (FPU_IS_EMU) {
-+ /* restore registers */
-+ memcpy(current->thread.fpcntl, sc->sc_fpcntl, 12);
-+ memcpy(current->thread.fp, sc->sc_fpregs, 24);
-+ return 0;
-+ }
-+
-+ if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
-+ /* Verify the frame format. */
-+ if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version))
-+ goto out;
-+ if (CPU_IS_020_OR_030) {
-+ if (m68k_fputype & FPU_68881 &&
-+ !(sc->sc_fpstate[1] == 0x18 ||
-+ sc->sc_fpstate[1] == 0xb4))
-+ goto out;
-+ if (m68k_fputype & FPU_68882 &&
-+ !(sc->sc_fpstate[1] == 0x38 ||
-+ sc->sc_fpstate[1] == 0xd4))
-+ goto out;
-+ } else if (CPU_IS_040) {
-+ if (!(sc->sc_fpstate[1] == 0x00 ||
-+ sc->sc_fpstate[1] == 0x28 ||
-+ sc->sc_fpstate[1] == 0x60))
-+ goto out;
-+ } else if (CPU_IS_060) {
-+ if (!(sc->sc_fpstate[3] == 0x00 ||
-+ sc->sc_fpstate[3] == 0x60 ||
-+ sc->sc_fpstate[3] == 0xe0))
-+ goto out;
-+ } else if (CPU_IS_CFV4E) {
-+ pr_debug("restore v4e fpu state at %s\n", __func__);
-+ } else
-+ goto out;
-+#ifdef CONFIG_CFV4E
-+ __asm__ volatile ("fmovem %0,%/fp0-%/fp1\n\t"
-+ QCHIP_RESTORE_DIRECTIVE
-+ : /* no outputs */
-+ : "m" (sc->sc_fpregs[0][0])
-+ : "memory");
-+ __asm__ volatile ("fmovel %0,%/fpcr"
-+ : : "m" (sc->sc_fpcntl[0])
-+ : "memory");
-+ __asm__ volatile ("fmovel %0,%/fpsr"
-+ : : "m" (sc->sc_fpcntl[1])
-+ : "memory");
-+ __asm__ volatile ("fmovel %0,%/fpiar"
-+ : : "m" (sc->sc_fpcntl[2])
-+ : "memory");
-+
-+#endif
-+ }
-+
-+#ifdef CONFIG_CFV4E
-+ __asm__ volatile ("frestore %0\n\t"
-+ QCHIP_RESTORE_DIRECTIVE : : "m" (*sc->sc_fpstate));
-+#endif
-+ err = 0;
-+
-+out:
-+ return err;
-+}
-+
-+static inline int rt_restore_fpu_state(struct ucontext __user *uc)
-+{
-+ unsigned char fpstate[FPCONTEXT_SIZE];
-+ int context_size = CPU_IS_060 ? 8 : 0;
-+ fpregset_t fpregs;
-+ int err = 1;
-+
-+ if (FPU_IS_EMU) {
-+ /* restore fpu control register */
-+ if (__copy_from_user(current->thread.fpcntl,
-+ uc->uc_mcontext.fpregs.f_fpcntl, 12))
-+ goto out;
-+ /* restore all other fpu register */
-+ if (__copy_from_user(current->thread.fp,
-+ uc->uc_mcontext.fpregs.f_fpregs, 96))
-+ goto out;
-+ return 0;
-+ }
-+
-+ if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate))
-+ goto out;
-+ if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
-+ if (!CPU_IS_060)
-+ context_size = fpstate[1];
-+ /* Verify the frame format. */
-+ if (!CPU_IS_060 && (fpstate[0] != fpu_version))
-+ goto out;
-+ if (CPU_IS_020_OR_030) {
-+ if (m68k_fputype & FPU_68881 &&
-+ !(context_size == 0x18 || context_size == 0xb4))
-+ goto out;
-+ if (m68k_fputype & FPU_68882 &&
-+ !(context_size == 0x38 || context_size == 0xd4))
-+ goto out;
-+ } else if (CPU_IS_040) {
-+ if (!(context_size == 0x00 ||
-+ context_size == 0x28 ||
-+ context_size == 0x60))
-+ goto out;
-+ } else if (CPU_IS_060) {
-+ if (!(fpstate[3] == 0x00 ||
-+ fpstate[3] == 0x60 ||
-+ fpstate[3] == 0xe0))
-+ goto out;
-+ } else if (CPU_IS_CFV4E) {
-+ pr_debug("restore coldfire rt v4e fpu"
-+ " state at %s\n", __func__);
-+ } else
-+ goto out;
-+ if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs,
-+ sizeof(fpregs)))
-+ goto out;
-+#ifdef CONFIG_CFV4E
-+ __asm__ volatile ("fmovem %0,%/fp0-%/fp7\n\t"
-+ QCHIP_RESTORE_DIRECTIVE
-+ : /* no outputs */
-+ : "m" (fpregs.f_fpregs[0][0])
-+ : "memory");
-+ __asm__ volatile ("fmovel %0,%/fpcr"
-+ : : "m" (fpregs.f_fpcntl[0])
-+ : "memory");
-+ __asm__ volatile ("fmovel %0,%/fpsr"
-+ : : "m" (fpregs.f_fpcntl[1])
-+ : "memory");
-+ __asm__ volatile ("fmovel %0,%/fpiar"
-+ : : "m" (fpregs.f_fpcntl[2])
-+ : "memory");
-+#endif
-+ }
-+ if (context_size &&
-+ __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1,
-+ context_size))
-+ goto out;
-+#ifdef CONFIG_CFV4E
-+ __asm__ volatile ("frestore %0\n\t"
-+ QCHIP_RESTORE_DIRECTIVE : : "m" (*fpstate));
-+#endif
-+ err = 0;
-+
-+out:
-+ return err;
-+}
-+#endif
-+
-+static inline int
-+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc,
-+ void __user *fp, int *pd0)
-+{
-+ int fsize, formatvec;
-+ struct sigcontext context;
-+ int err = 0;
-+
-+ /* get previous context */
-+ if (copy_from_user(&context, usc, sizeof(context)))
-+ goto badframe;
-+
-+ /* restore passed registers */
-+ regs->d1 = context.sc_d1;
-+ regs->a0 = context.sc_a0;
-+ regs->a1 = context.sc_a1;
-+ regs->sr = (regs->sr & 0xff00) | (context.sc_sr & 0xff);
-+ regs->pc = context.sc_pc;
-+ regs->orig_d0 = -1; /* disable syscall checks */
-+ wrusp(context.sc_usp);
-+ formatvec = context.sc_formatvec;
-+ regs->format = formatvec >> 12;
-+ regs->vector = formatvec & 0xfff;
-+
-+#ifdef CONFIG_FPU
-+ err = restore_fpu_state(&context);
-+#endif
-+
-+ fsize = frame_extra_sizes[regs->format];
-+ if (fsize < 0) {
-+ /*
-+ * user process trying to return with weird frame format
-+ */
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "user process returning with weird \
-+ frame format\n");
-+#endif
-+ goto badframe;
-+ }
-+
-+ /* OK. Make room on the supervisor stack for the extra junk,
-+ * if necessary.
-+ */
-+
-+ {
-+ struct switch_stack *sw = (struct switch_stack *)regs - 1;
-+ regs->d0 = context.sc_d0;
-+#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
-+ __asm__ __volatile__
-+ (" movel %0,%/sp\n\t"
-+ " bra ret_from_signal\n"
-+ "4:\n"
-+ ".section __ex_table,\"a\"\n"
-+ " .align 4\n"
-+ " .long 2b,4b\n"
-+ ".previous"
-+ : /* no outputs, it doesn't ever return */
-+ : "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
-+ "n" (frame_offset), "a" (fp)
-+ : "a0");
-+#undef frame_offset
-+ /*
-+ * If we ever get here an exception occurred while
-+ * building the above stack-frame.
-+ */
-+ goto badframe;
-+ }
-+
-+ *pd0 = context.sc_d0;
-+ return err;
-+
-+badframe:
-+ return 1;
-+}
-+
-+static inline int
-+rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw,
-+ struct ucontext __user *uc, int *pd0)
-+{
-+ int fsize, temp;
-+ greg_t __user *gregs = uc->uc_mcontext.gregs;
-+ unsigned long usp;
-+ int err;
-+
-+ err = __get_user(temp, &uc->uc_mcontext.version);
-+ if (temp != MCONTEXT_VERSION)
-+ goto badframe;
-+ /* restore passed registers */
-+ err |= __get_user(regs->d0, &gregs[0]);
-+ err |= __get_user(regs->d1, &gregs[1]);
-+ err |= __get_user(regs->d2, &gregs[2]);
-+ err |= __get_user(regs->d3, &gregs[3]);
-+ err |= __get_user(regs->d4, &gregs[4]);
-+ err |= __get_user(regs->d5, &gregs[5]);
-+ err |= __get_user(sw->d6, &gregs[6]);
-+ err |= __get_user(sw->d7, &gregs[7]);
-+ err |= __get_user(regs->a0, &gregs[8]);
-+ err |= __get_user(regs->a1, &gregs[9]);
-+ err |= __get_user(regs->a2, &gregs[10]);
-+ err |= __get_user(sw->a3, &gregs[11]);
-+ err |= __get_user(sw->a4, &gregs[12]);
-+ err |= __get_user(sw->a5, &gregs[13]);
-+ err |= __get_user(sw->a6, &gregs[14]);
-+ err |= __get_user(usp, &gregs[15]);
-+ wrusp(usp);
-+ err |= __get_user(regs->pc, &gregs[16]);
-+ err |= __get_user(temp, &gregs[17]);
-+ regs->sr = (regs->sr & 0xff00) | (temp & 0xff);
-+ regs->orig_d0 = -1; /* disable syscall checks */
-+ err |= __get_user(temp, &uc->uc_formatvec);
-+ regs->format = temp >> 12;
-+ regs->vector = temp & 0xfff;
-+
-+#ifdef CONFIG_FPU
-+ err |= rt_restore_fpu_state(uc);
-+#endif
-+
-+ if (do_sigaltstack(&uc->uc_stack, NULL, usp) == -EFAULT)
-+ goto badframe;
-+
-+ fsize = frame_extra_sizes[regs->format];
-+ if (fsize < 0) {
-+ /*
-+ * user process trying to return with weird frame format
-+ */
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "user process returning with weird \
-+ frame format\n");
-+#endif
-+ goto badframe;
-+ }
-+
-+ /* OK. Make room on the supervisor stack for the extra junk,
-+ * if necessary.
-+ */
-+
-+ {
-+#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
-+ __asm__ __volatile__
-+ (" movel %0,%/sp\n\t"
-+ " bra ret_from_signal\n"
-+ "4:\n"
-+ ".section __ex_table,\"a\"\n"
-+ " .align 4\n"
-+ " .long 2b,4b\n"
-+ ".previous"
-+ : /* no outputs, it doesn't ever return */
-+ : "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
-+ "n" (frame_offset), "a" (&uc->uc_extra)
-+ : "a0");
-+#undef frame_offset
-+ /*
-+ * If we ever get here an exception occurred while
-+ * building the above stack-frame.
-+ */
-+ goto badframe;
-+ }
-+
-+ *pd0 = regs->d0;
-+ return err;
-+
-+badframe:
-+ return 1;
-+}
-+
-+asmlinkage int do_sigreturn(unsigned long __unused)
-+{
-+ struct switch_stack *sw = (struct switch_stack *) &__unused;
-+ struct pt_regs *regs = (struct pt_regs *) (sw + 1);
-+ unsigned long usp = rdusp();
-+ struct sigframe __user *frame = (struct sigframe __user *)(usp - 4);
-+ sigset_t set;
-+ int d0;
-+
-+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-+ goto badframe;
-+ if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
-+ (_NSIG_WORDS > 1 &&
-+ __copy_from_user(&set.sig[1], &frame->extramask,
-+ sizeof(frame->extramask))))
-+ goto badframe;
-+
-+ sigdelsetmask(&set, ~_BLOCKABLE);
-+ spin_lock_irq(&current->sighand->siglock);
-+ current->blocked = set;
-+ recalc_sigpending();
-+ spin_unlock_irq(&current->sighand->siglock);
-+
-+ if (restore_sigcontext(regs, &frame->sc, frame + 1, &d0))
-+ goto badframe;
-+ return d0;
-+
-+badframe:
-+ force_sig(SIGSEGV, current);
-+ return 0;
-+}
-+
-+asmlinkage int do_rt_sigreturn(unsigned long __unused)
-+{
-+ struct switch_stack *sw = (struct switch_stack *) &__unused;
-+ struct pt_regs *regs = (struct pt_regs *) (sw + 1);
-+ unsigned long usp = rdusp();
-+ struct rt_sigframe __user *frame =
-+ (struct rt_sigframe __user *)(usp - 4);
-+ sigset_t set;
-+ int d0;
-+
-+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-+ goto badframe;
-+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-+ goto badframe;
-+
-+ sigdelsetmask(&set, ~_BLOCKABLE);
-+ spin_lock_irq(&current->sighand->siglock);
-+ current->blocked = set;
-+ recalc_sigpending();
-+ spin_unlock_irq(&current->sighand->siglock);
-+
-+ if (rt_restore_ucontext(regs, sw, &frame->uc, &d0))
-+ goto badframe;
-+ return d0;
-+
-+badframe:
-+ force_sig(SIGSEGV, current);
-+ return 0;
-+}
-+
-+#ifdef CONFIG_FPU
-+/*
-+ * Set up a signal frame.
-+ */
-+
-+static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
-+{
-+ if (FPU_IS_EMU) {
-+ /* save registers */
-+ memcpy(sc->sc_fpcntl, current->thread.fpcntl, 12);
-+ memcpy(sc->sc_fpregs, current->thread.fp, 24);
-+ return;
-+ }
-+
-+#ifdef CONFIG_CFV4E
-+ __asm__ volatile ("fsave %0\n\t"
-+ QCHIP_RESTORE_DIRECTIVE
-+ : : "m" (*sc->sc_fpstate) : "memory");
-+#endif
-+
-+ if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
-+ fpu_version = sc->sc_fpstate[0];
-+ if (CPU_IS_020_OR_030 &&
-+ regs->vector >= (VEC_FPBRUC * 4) &&
-+ regs->vector <= (VEC_FPNAN * 4)) {
-+ /* Clear pending exception in 68882 idle frame */
-+ if (*(unsigned short *) sc->sc_fpstate == 0x1f38)
-+ sc->sc_fpstate[0x38] |= 1 << 3;
-+ }
-+#ifdef CONFIG_CFV4E
-+ __asm__ volatile ("fmovemd %/fp0-%/fp1,%0"
-+ : : "m" (sc->sc_fpregs[0][0])
-+ : "memory");
-+ __asm__ volatile ("fmovel %/fpcr,%0"
-+ : : "m" (sc->sc_fpcntl[0])
-+ : "memory");
-+ __asm__ volatile ("fmovel %/fpsr,%0"
-+ : : "m" (sc->sc_fpcntl[1])
-+ : "memory");
-+ __asm__ volatile ("fmovel %/fpiar,%0"
-+ : : "m" (sc->sc_fpcntl[2])
-+ : "memory");
-+
-+#endif
-+ }
-+}
-+
-+static inline int rt_save_fpu_state(struct ucontext __user *uc,
-+ struct pt_regs *regs)
-+{
-+ unsigned char fpstate[FPCONTEXT_SIZE];
-+ int context_size = CPU_IS_060 ? 8 : 0;
-+ int err = 0;
-+
-+ if (FPU_IS_EMU) {
-+ /* save fpu control register */
-+ err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpcntl,
-+ current->thread.fpcntl, 12);
-+ /* save all other fpu register */
-+ err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpregs,
-+ current->thread.fp, 96);
-+ return err;
-+ }
-+
-+#ifdef CONFIG_CFV4E
-+ __asm__ volatile ("fsave %0\n\t"
-+ QCHIP_RESTORE_DIRECTIVE
-+ : : "m" (*fpstate) : "memory");
-+#endif
-+ err |= __put_user(*(long *)fpstate, (long *)&uc->uc_fpstate);
-+ if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
-+ fpregset_t fpregs;
-+ if (!CPU_IS_060)
-+ context_size = fpstate[1];
-+ fpu_version = fpstate[0];
-+#ifdef CONFIG_CFV4E
-+ __asm__ volatile ("fmovemd %/fp0-%/fp7,%0"
-+ : : "m" (fpregs.f_fpregs[0][0])
-+ : "memory");
-+ __asm__ volatile ("fmovel %/fpcr,%0"
-+ : : "m" (fpregs.f_fpcntl[0])
-+ : "memory");
-+ __asm__ volatile ("fmovel %/fpsr,%0"
-+ : : "m" (fpregs.f_fpcntl[1])
-+ : "memory");
-+ __asm__ volatile ("fmovel %/fpiar,%0"
-+ : : "m" (fpregs.f_fpcntl[2])
-+ : "memory");
-+#endif
-+ err |= copy_to_user(&uc->uc_mcontext.fpregs, &fpregs,
-+ sizeof(fpregs));
-+ }
-+ if (context_size)
-+ err |= copy_to_user((long *)&uc->uc_fpstate + 1, fpstate + 4,
-+ context_size);
-+ return err;
-+
-+
-+ return err;
-+}
-+#endif
-+
-+static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-+ unsigned long mask)
-+{
-+ sc->sc_mask = mask;
-+ sc->sc_usp = rdusp();
-+ sc->sc_d0 = regs->d0;
-+ sc->sc_d1 = regs->d1;
-+ sc->sc_a0 = regs->a0;
-+ sc->sc_a1 = regs->a1;
-+ sc->sc_sr = regs->sr;
-+ sc->sc_pc = regs->pc;
-+ sc->sc_formatvec = regs->format << 12 | regs->vector;
-+#ifdef CONFIG_FPU
-+ save_fpu_state(sc, regs);
-+#endif
-+}
-+
-+static inline int rt_setup_ucontext(struct ucontext __user *uc,
-+ struct pt_regs *regs)
-+{
-+ struct switch_stack *sw = (struct switch_stack *)regs - 1;
-+ greg_t __user *gregs = uc->uc_mcontext.gregs;
-+ int err = 0;
-+
-+ err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
-+ err |= __put_user(regs->d0, &gregs[0]);
-+ err |= __put_user(regs->d1, &gregs[1]);
-+ err |= __put_user(regs->d2, &gregs[2]);
-+ err |= __put_user(regs->d3, &gregs[3]);
-+ err |= __put_user(regs->d4, &gregs[4]);
-+ err |= __put_user(regs->d5, &gregs[5]);
-+ err |= __put_user(sw->d6, &gregs[6]);
-+ err |= __put_user(sw->d7, &gregs[7]);
-+ err |= __put_user(regs->a0, &gregs[8]);
-+ err |= __put_user(regs->a1, &gregs[9]);
-+ err |= __put_user(regs->a2, &gregs[10]);
-+ err |= __put_user(sw->a3, &gregs[11]);
-+ err |= __put_user(sw->a4, &gregs[12]);
-+ err |= __put_user(sw->a5, &gregs[13]);
-+ err |= __put_user(sw->a6, &gregs[14]);
-+ err |= __put_user(rdusp(), &gregs[15]);
-+ err |= __put_user(regs->pc, &gregs[16]);
-+ err |= __put_user(regs->sr, &gregs[17]);
-+ err |= __put_user((regs->format << 12) | regs->vector,
-+ &uc->uc_formatvec);
-+#ifdef CONFIG_FPU
-+ err |= rt_save_fpu_state(uc, regs);
-+#endif
-+ return err;
-+}
-+
-+static inline void push_cache(unsigned long vaddr)
-+{
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+ pgd_t *pdir;
-+ pmd_t *pmdp;
-+ pte_t *ptep;
-+ unsigned long paddr;
-+
-+ pdir = pgd_offset(current->mm, vaddr);
-+ pmdp = pmd_offset(pdir, vaddr);
-+ ptep = pte_offset_map(pmdp, vaddr);
-+ paddr = ((pte_val(*ptep) & PAGE_MASK) | (vaddr & ~PAGE_MASK));
-+ cf_icache_flush_range(paddr, paddr + 8);
-+#elif defined(CONFIG_M547X_8X)
-+ flush_icache_range(vaddr, vaddr + 8);
-+#endif
-+}
-+
-+static inline void __user *
-+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-+{
-+ unsigned long usp;
-+
-+ /* Default to using normal stack. */
-+ usp = rdusp();
-+
-+ /* This is the X/Open sanctioned signal stack switching. */
-+ if (ka->sa.sa_flags & SA_ONSTACK) {
-+ if (!sas_ss_flags(usp))
-+ usp = current->sas_ss_sp + current->sas_ss_size;
-+ }
-+ return (void __user *)((usp - frame_size) & -8UL);
-+}
-+
-+static void setup_frame(int sig, struct k_sigaction *ka,
-+ sigset_t *set, struct pt_regs *regs)
-+{
-+ struct sigframe __user *frame;
-+ int fsize = frame_extra_sizes[regs->format];
-+ struct sigcontext context;
-+ int err = 0;
-+
-+ if (fsize < 0) {
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n",
-+ regs->format);
-+#endif
-+ goto give_sigsegv;
-+ }
-+
-+ frame = get_sigframe(ka, regs, sizeof(*frame));
-+
-+ err |= __put_user((current_thread_info()->exec_domain
-+ && current_thread_info()->exec_domain->signal_invmap
-+ && sig < 32
-+ ? current_thread_info()->exec_domain->signal_invmap[sig]
-+ : sig),
-+ &frame->sig);
-+
-+ err |= __put_user(regs->vector, &frame->code);
-+ err |= __put_user(&frame->sc, &frame->psc);
-+
-+ if (_NSIG_WORDS > 1)
-+ err |= copy_to_user(frame->extramask, &set->sig[1],
-+ sizeof(frame->extramask));
-+
-+ setup_sigcontext(&context, regs, set->sig[0]);
-+ err |= copy_to_user(&frame->sc, &context, sizeof(context));
-+
-+ /* Set up to return from userspace. */
-+ err |= __put_user(frame->retcode, &frame->pretcode);
-+ /* moveq #,d0; trap #0 */
-+ err |= __put_user(0x70004e40 + (__NR_sigreturn << 16),
-+ (long __user *)(frame->retcode));
-+
-+ if (err)
-+ goto give_sigsegv;
-+
-+ push_cache((unsigned long) &frame->retcode);
-+
-+ /* Set up registers for signal handler */
-+ wrusp((unsigned long) frame);
-+ regs->pc = (unsigned long) ka->sa.sa_handler;
-+
-+adjust_stack:
-+ /* Prepare to skip over the extra stuff in the exception frame. */
-+ if (regs->stkadj) {
-+ struct pt_regs *tregs =
-+ (struct pt_regs *)((ulong)regs + regs->stkadj);
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "Performing stackadjust=%04x\n",
-+ regs->stkadj);
-+#endif
-+ /* This must be copied with decreasing addresses to
-+ handle overlaps. */
-+ tregs->vector = 0;
-+ tregs->format = 0;
-+ tregs->pc = regs->pc;
-+ tregs->sr = regs->sr;
-+ }
-+ return;
-+
-+give_sigsegv:
-+ force_sigsegv(sig, current);
-+ goto adjust_stack;
-+}
-+
-+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-+ sigset_t *set, struct pt_regs *regs)
-+{
-+ struct rt_sigframe __user *frame;
-+ int fsize = frame_extra_sizes[regs->format];
-+ int err = 0;
-+
-+ if (fsize < 0) {
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n",
-+ regs->format);
-+#endif
-+ goto give_sigsegv;
-+ }
-+
-+ frame = get_sigframe(ka, regs, sizeof(*frame));
-+
-+ if (fsize) {
-+ err |= copy_to_user(&frame->uc.uc_extra, regs + 1, fsize);
-+ regs->stkadj = fsize;
-+ }
-+
-+ err |= __put_user((current_thread_info()->exec_domain
-+ && current_thread_info()->exec_domain->signal_invmap
-+ && sig < 32
-+ ? current_thread_info()->exec_domain->signal_invmap[sig]
-+ : sig),
-+ &frame->sig);
-+ err |= __put_user(&frame->info, &frame->pinfo);
-+ err |= __put_user(&frame->uc, &frame->puc);
-+ err |= copy_siginfo_to_user(&frame->info, info);
-+
-+ /* Create the ucontext. */
-+ err |= __put_user(0, &frame->uc.uc_flags);
-+ err |= __put_user(NULL, &frame->uc.uc_link);
-+ err |= __put_user((void __user *)current->sas_ss_sp,
-+ &frame->uc.uc_stack.ss_sp);
-+ err |= __put_user(sas_ss_flags(rdusp()),
-+ &frame->uc.uc_stack.ss_flags);
-+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-+ err |= rt_setup_ucontext(&frame->uc, regs);
-+ err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-+
-+ /* Set up to return from userspace. */
-+ err |= __put_user(frame->retcode, &frame->pretcode);
-+
-+ /* movel #__NR_rt_sigreturn(0xAD),d0; trap #0 */
-+ err |= __put_user(0x203c0000, (long *)(frame->retcode + 0));
-+ err |= __put_user(0x00ad4e40, (long *)(frame->retcode + 4));
-+
-+ if (err)
-+ goto give_sigsegv;
-+
-+ push_cache((unsigned long) &frame->retcode);
-+
-+ /* Set up registers for signal handler */
-+ wrusp((unsigned long) frame);
-+ regs->pc = (unsigned long) ka->sa.sa_handler;
-+
-+adjust_stack:
-+ /* Prepare to skip over the extra stuff in the exception frame. */
-+ if (regs->stkadj) {
-+ struct pt_regs *tregs =
-+ (struct pt_regs *)((ulong)regs + regs->stkadj);
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "Performing stackadjust=%04x\n",
-+ regs->stkadj);
-+#endif
-+ /* This must be copied with decreasing addresses to
-+ handle overlaps. */
-+ tregs->vector = 0;
-+ tregs->format = 0;
-+ tregs->pc = regs->pc;
-+ tregs->sr = regs->sr;
-+ }
-+ return;
-+
-+give_sigsegv:
-+ force_sigsegv(sig, current);
-+ goto adjust_stack;
-+}
-+
-+static inline void
-+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
-+{
-+ switch (regs->d0) {
-+ case -ERESTARTNOHAND:
-+ if (!has_handler)
-+ goto do_restart;
-+ regs->d0 = -EINTR;
-+ break;
-+
-+ case -ERESTARTSYS:
-+ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
-+ regs->d0 = -EINTR;
-+ break;
-+ }
-+ /* fallthrough */
-+ case -ERESTARTNOINTR:
-+do_restart:
-+ regs->d0 = regs->orig_d0;
-+ regs->pc -= 2;
-+ break;
-+ }
-+}
-+
-+/*
-+ * OK, we're invoking a handler
-+ */
-+static void
-+handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
-+ sigset_t *oldset, struct pt_regs *regs)
-+{
-+ /* are we from a system call? */
-+ if (regs->orig_d0 >= 0)
-+ /* If so, check system call restarting.. */
-+ handle_restart(regs, ka, 1);
-+
-+ /* set up the stack frame */
-+ if (ka->sa.sa_flags & SA_SIGINFO)
-+ setup_rt_frame(sig, ka, info, oldset, regs);
-+ else
-+ setup_frame(sig, ka, oldset, regs);
-+
-+ if (ka->sa.sa_flags & SA_ONESHOT)
-+ ka->sa.sa_handler = SIG_DFL;
-+
-+ spin_lock_irq(&current->sighand->siglock);
-+ sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-+ if (!(ka->sa.sa_flags & SA_NODEFER))
-+ sigaddset(&current->blocked, sig);
-+ recalc_sigpending();
-+ spin_unlock_irq(&current->sighand->siglock);
-+}
-+
-+/*
-+ * Note that 'init' is a special process: it doesn't get signals it doesn't
-+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
-+ * mistake.
-+ */
-+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
-+{
-+ siginfo_t info;
-+ struct k_sigaction ka;
-+ int signr;
-+
-+ current->thread.esp0 = (unsigned long) regs;
-+
-+ if (!oldset)
-+ oldset = &current->blocked;
-+
-+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-+ if (signr > 0) {
-+ /* Whee! Actually deliver the signal. */
-+ handle_signal(signr, &ka, &info, oldset, regs);
-+ return 1;
-+ }
-+
-+ /* Did we come from a system call? */
-+ if (regs->orig_d0 >= 0)
-+ /* Restart the system call - no handlers present */
-+ handle_restart(regs, NULL, 0);
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/common/traps.c
-@@ -0,0 +1,457 @@
-+/*
-+ * linux/arch/m68knommu/kernel/traps.c
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+/*
-+ * Sets up all exception vectors
-+ */
-+#include <linux/sched.h>
-+#include <linux/signal.h>
-+#include <linux/kernel.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/a.out.h>
-+#include <linux/user.h>
-+#include <linux/string.h>
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <linux/ptrace.h>
-+#include <linux/kallsyms.h>
-+
-+#include <asm/setup.h>
-+#include <asm/fpu.h>
-+#include <asm/system.h>
-+#include <asm/uaccess.h>
-+#include <asm/traps.h>
-+#include <asm/pgtable.h>
-+#include <asm/machdep.h>
-+#include <asm/siginfo.h>
-+
-+static char const * const vec_names[] = {
-+ "RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR",
-+ "ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc",
-+ "PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111",
-+ "UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION",
-+ "FORMAT ERROR", "UNINITIALIZED INTERRUPT",
-+ "UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17",
-+ "UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19",
-+ "UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21",
-+ "UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23",
-+ "SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT",
-+ "LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT",
-+ "SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3",
-+ "TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7",
-+ "TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11",
-+ "TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15",
-+ "FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW",
-+ "FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN",
-+ "FPCP UNSUPPORTED OPERATION",
-+ "MMU CONFIGURATION ERROR"
-+};
-+
-+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
-+ unsigned long error_code);
-+asmlinkage void trap_c(struct frame *fp);
-+extern void __init coldfire_trap_init(void);
-+
-+void __init trap_init(void)
-+{
-+ coldfire_trap_init();
-+}
-+
-+/* The following table converts the FS encoding of a ColdFire
-+ exception stack frame into the error_code value needed by
-+ do_fault. */
-+
-+static const unsigned char fs_err_code[] = {
-+ 0, /* 0000 */
-+ 0, /* 0001 */
-+ 0, /* 0010 */
-+ 0, /* 0011 */
-+ 1, /* 0100 */
-+ 0, /* 0101 */
-+ 0, /* 0110 */
-+ 0, /* 0111 */
-+ 2, /* 1000 */
-+ 3, /* 1001 */
-+ 2, /* 1010 */
-+ 0, /* 1011 */
-+ 1, /* 1100 */
-+ 1, /* 1101 */
-+ 0, /* 1110 */
-+ 0 /* 1111 */
-+};
-+
-+#ifdef DEBUG
-+static const char *fs_err_msg[16] = {
-+ "Normal",
-+ "Reserved",
-+ "Interrupt during debug service routine",
-+ "Reserved",
-+ "X Protection",
-+ "TLB X miss (opword)",
-+ "TLB X miss (ext. word)",
-+ "IFP in emulator mode",
-+ "W Protection",
-+ "Write error",
-+ "TLB W miss",
-+ "Reserved",
-+ "R Protection",
-+ "R/RMW Protection",
-+ "TLB R miss",
-+ "OEP in emulator mode",
-+};
-+#endif
-+
-+static inline void access_errorCF(struct frame *fp)
-+{
-+ unsigned long int mmusr, complainingAddress;
-+ unsigned int err_code, fs;
-+ int need_page_fault;
-+
-+ mmusr = fp->ptregs.mmusr;
-+ complainingAddress = fp->ptregs.mmuar;
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "pc %#lx, mmusr %#lx, complainingAddress %#lx\n", \
-+ fp->ptregs.pc, mmusr, complainingAddress);
-+#endif
-+
-+ /*
-+ * error_code:
-+ * bit 0 == 0 means no page found, 1 means protection fault
-+ * bit 1 == 0 means read, 1 means write
-+ */
-+
-+ fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1;
-+ switch (fs) {
-+ case 5: /* 0101 TLB opword X miss */
-+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0);
-+ complainingAddress = fp->ptregs.pc;
-+ break;
-+ case 6: /* 0110 TLB extension word X miss */
-+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1);
-+ complainingAddress = fp->ptregs.pc + sizeof(long);
-+ break;
-+ case 10: /* 1010 TLB W miss */
-+ need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0);
-+ break;
-+ case 14: /* 1110 TLB R miss */
-+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0);
-+ break;
-+ default:
-+ /* 0000 Normal */
-+ /* 0001 Reserved */
-+ /* 0010 Interrupt during debug service routine */
-+ /* 0011 Reserved */
-+ /* 0100 X Protection */
-+ /* 0111 IFP in emulator mode */
-+ /* 1000 W Protection*/
-+ /* 1001 Write error*/
-+ /* 1011 Reserved*/
-+ /* 1100 R Protection*/
-+ /* 1101 R Protection*/
-+ /* 1111 OEP in emulator mode*/
-+ need_page_fault = 1;
-+ break;
-+ }
-+
-+ if (need_page_fault) {
-+ err_code = fs_err_code[fs];
-+ if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */
-+ err_code |= 2; /* bit1 - write, bit0 - protection */
-+ do_page_fault(&fp->ptregs, complainingAddress, err_code);
-+ }
-+}
-+
-+void die_if_kernel(char *str, struct pt_regs *fp, int nr)
-+{
-+ if (!(fp->sr & PS_S))
-+ return;
-+
-+ console_verbose();
-+ printk(KERN_EMERG "%s: %08x\n", str, nr);
-+ printk(KERN_EMERG "PC: [<%08lx>]", fp->pc);
-+ print_symbol(" %s", fp->pc);
-+ printk(KERN_EMERG "\nSR: %04x SP: %p a2: %08lx\n",
-+ fp->sr, fp, fp->a2);
-+ printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
-+ fp->d0, fp->d1, fp->d2, fp->d3);
-+ printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
-+ fp->d4, fp->d5, fp->a0, fp->a1);
-+
-+ printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n",
-+ current->comm, current->pid, PAGE_SIZE+(unsigned long)current);
-+ show_stack(NULL, (unsigned long *)fp);
-+ do_exit(SIGSEGV);
-+}
-+
-+asmlinkage void buserr_c(struct frame *fp)
-+{
-+ unsigned int fs;
-+
-+ /* Only set esp0 if coming from user mode */
-+ if (user_mode(&fp->ptregs))
-+ current->thread.esp0 = (unsigned long) fp;
-+
-+ fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1;
-+#if defined(DEBUG)
-+ printk(KERN_DEBUG "*** Bus Error *** (%x)%s\n", fs,
-+ fs_err_msg[fs & 0xf]);
-+#endif
-+ switch (fs) {
-+ case 0x5:
-+ case 0x6:
-+ case 0x7:
-+ case 0x9:
-+ case 0xa:
-+ case 0xd:
-+ case 0xe:
-+ case 0xf:
-+ access_errorCF(fp);
-+ break;
-+ default:
-+ die_if_kernel("bad frame format", &fp->ptregs, 0);
-+#if defined(DEBUG)
-+ printk(KERN_DEBUG "Unknown SIGSEGV - 4\n");
-+#endif
-+ force_sig(SIGSEGV, current);
-+ }
-+}
-+
-+void show_trace(unsigned long *stack)
-+{
-+ unsigned long *endstack;
-+ unsigned long addr;
-+ int i;
-+
-+ printk(KERN_INFO "Call Trace:");
-+ addr = (unsigned long)stack + THREAD_SIZE - 1;
-+ endstack = (unsigned long *)(addr & -THREAD_SIZE);
-+ i = 0;
-+ while (stack + 1 <= endstack) {
-+ addr = *stack++;
-+ /*
-+ * If the address is either in the text segment of the
-+ * kernel, or in the region which contains vmalloc'ed
-+ * memory, it *may* be the address of a calling
-+ * routine; if so, print it so that someone tracing
-+ * down the cause of the crash will be able to figure
-+ * out the call path that was taken.
-+ */
-+ if (__kernel_text_address(addr)) {
-+#ifndef CONFIG_KALLSYMS
-+ if (i % 5 == 0)
-+ printk("\n ");
-+#endif
-+ printk(" [<%08lx>] %pS\n", addr, (void *)addr);
-+ i++;
-+ }
-+ }
-+ printk(KERN_INFO "\n");
-+}
-+
-+int kstack_depth_to_print = 48;
-+void show_stack(struct task_struct *task, unsigned long *stack)
-+{
-+ unsigned long *p;
-+ unsigned long *endstack;
-+ int i;
-+
-+ if (!stack) {
-+ if (task)
-+ stack = (unsigned long *)task->thread.esp0;
-+ else
-+ stack = (unsigned long *)&stack;
-+ }
-+ endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1)
-+ & -THREAD_SIZE);
-+
-+ printk(KERN_INFO "Stack from %08lx:", (unsigned long)stack);
-+ p = stack;
-+ for (i = 0; i < kstack_depth_to_print; i++) {
-+ if (p + 1 > endstack)
-+ break;
-+ if (i % 8 == 0)
-+ printk("\n ");
-+ printk(" %08lx", *p++);
-+ }
-+ printk("\n");
-+ show_trace(stack);
-+}
-+
-+void bad_super_trap(struct frame *fp)
-+{
-+ console_verbose();
-+ if (fp->ptregs.vector < sizeof(vec_names)/sizeof(vec_names[0]))
-+ printk(KERN_WARNING "*** %s *** FORMAT=%X\n",
-+ vec_names[fp->ptregs.vector],
-+ fp->ptregs.format);
-+ else
-+ printk(KERN_WARNING "*** Exception %d *** FORMAT=%X\n",
-+ fp->ptregs.vector,
-+ fp->ptregs.format);
-+ printk(KERN_WARNING "Current process id is %d\n", current->pid);
-+ die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
-+}
-+
-+asmlinkage void trap_c(struct frame *fp)
-+{
-+ int sig;
-+ siginfo_t info;
-+
-+ if (fp->ptregs.sr & PS_S) {
-+ if (fp->ptregs.vector == VEC_TRACE) {
-+ /* traced a trapping instruction */
-+ current->ptrace |= PT_DTRACE;
-+ } else
-+ bad_super_trap(fp);
-+ return;
-+ }
-+
-+ /* send the appropriate signal to the user program */
-+ switch (fp->ptregs.vector) {
-+ case VEC_ADDRERR:
-+ info.si_code = BUS_ADRALN;
-+ sig = SIGBUS;
-+ break;
-+ case VEC_ILLEGAL:
-+ case VEC_LINE10:
-+ case VEC_LINE11:
-+ info.si_code = ILL_ILLOPC;
-+ sig = SIGILL;
-+ break;
-+ case VEC_PRIV:
-+ info.si_code = ILL_PRVOPC;
-+ sig = SIGILL;
-+ break;
-+ case VEC_COPROC:
-+ info.si_code = ILL_COPROC;
-+ sig = SIGILL;
-+ break;
-+ case VEC_TRAP1: /* gdbserver breakpoint */
-+ fp->ptregs.pc -= 2;
-+ info.si_code = TRAP_TRACE;
-+ sig = SIGTRAP;
-+ break;
-+ case VEC_TRAP2:
-+ case VEC_TRAP3:
-+ case VEC_TRAP4:
-+ case VEC_TRAP5:
-+ case VEC_TRAP6:
-+ case VEC_TRAP7:
-+ case VEC_TRAP8:
-+ case VEC_TRAP9:
-+ case VEC_TRAP10:
-+ case VEC_TRAP11:
-+ case VEC_TRAP12:
-+ case VEC_TRAP13:
-+ case VEC_TRAP14:
-+ info.si_code = ILL_ILLTRP;
-+ sig = SIGILL;
-+ break;
-+ case VEC_FPBRUC:
-+ case VEC_FPOE:
-+ case VEC_FPNAN:
-+ info.si_code = FPE_FLTINV;
-+ sig = SIGFPE;
-+ break;
-+ case VEC_FPIR:
-+ info.si_code = FPE_FLTRES;
-+ sig = SIGFPE;
-+ break;
-+ case VEC_FPDIVZ:
-+ info.si_code = FPE_FLTDIV;
-+ sig = SIGFPE;
-+ break;
-+ case VEC_FPUNDER:
-+ info.si_code = FPE_FLTUND;
-+ sig = SIGFPE;
-+ break;
-+ case VEC_FPOVER:
-+ info.si_code = FPE_FLTOVF;
-+ sig = SIGFPE;
-+ break;
-+ case VEC_ZERODIV:
-+ info.si_code = FPE_INTDIV;
-+ sig = SIGFPE;
-+ break;
-+ case VEC_CHK:
-+ case VEC_TRAP:
-+ info.si_code = FPE_INTOVF;
-+ sig = SIGFPE;
-+ break;
-+ case VEC_TRACE: /* ptrace single step */
-+ info.si_code = TRAP_TRACE;
-+ sig = SIGTRAP;
-+ break;
-+ case VEC_TRAP15: /* breakpoint */
-+ info.si_code = TRAP_BRKPT;
-+ sig = SIGTRAP;
-+ break;
-+ default:
-+ info.si_code = ILL_ILLOPC;
-+ sig = SIGILL;
-+ break;
-+ }
-+ info.si_signo = sig;
-+ info.si_errno = 0;
-+ switch (fp->ptregs.format) {
-+ default:
-+ info.si_addr = (void *) fp->ptregs.pc;
-+ break;
-+ case 2:
-+ info.si_addr = (void *) fp->un.fmt2.iaddr;
-+ break;
-+ case 7:
-+ info.si_addr = (void *) fp->un.fmt7.effaddr;
-+ break;
-+ case 9:
-+ info.si_addr = (void *) fp->un.fmt9.iaddr;
-+ break;
-+ case 10:
-+ info.si_addr = (void *) fp->un.fmta.daddr;
-+ break;
-+ case 11:
-+ info.si_addr = (void *) fp->un.fmtb.daddr;
-+ break;
-+ }
-+ force_sig_info(sig, &info, current);
-+}
-+
-+asmlinkage void set_esp0(unsigned long ssp)
-+{
-+ current->thread.esp0 = ssp;
-+}
-+
-+/*
-+ * The architecture-independent backtrace generator
-+ */
-+void dump_stack(void)
-+{
-+ unsigned long stack;
-+
-+ show_stack(current, &stack);
-+}
-+EXPORT_SYMBOL(dump_stack);
-+
-+#ifdef CONFIG_M68KFPU_EMU
-+asmlinkage void fpemu_signal(int signal, int code, void *addr)
-+{
-+ siginfo_t info;
-+
-+ info.si_signo = signal;
-+ info.si_errno = 0;
-+ info.si_code = code;
-+ info.si_addr = addr;
-+ force_sig_info(signal, &info, current);
-+}
-+#endif
---- a/arch/m68k/include/asm/atomic.h
-+++ b/arch/m68k/include/asm/atomic.h
-@@ -1,3 +1,11 @@
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
- #ifndef __ARCH_M68K_ATOMIC__
- #define __ARCH_M68K_ATOMIC__
-
-@@ -30,12 +38,20 @@
-
- static inline void atomic_add(int i, atomic_t *v)
- {
-- __asm__ __volatile__("addl %1,%0" : "+m" (*v) : ASM_DI (i));
-+#ifndef CONFIG_COLDFIRE
-+ __asm__ __volatile__("addl %1,%0" : "+m" (*v) : ASM_DI(i));
-+#else
-+ __asm__ __volatile__("addl %1,%0" : "=m" (*v) : ASM_DI(i), "m" (*v));
-+#endif
- }
-
- static inline void atomic_sub(int i, atomic_t *v)
- {
-- __asm__ __volatile__("subl %1,%0" : "+m" (*v) : ASM_DI (i));
-+#ifndef CONFIG_COLDFIRE
-+ __asm__ __volatile__("subl %1,%0" : "+m" (*v) : ASM_DI(i));
-+#else
-+ __asm__ __volatile__("subl %1,%0" : "=m" (*v) : ASM_DI(i), "m" (*v));
-+#endif
- }
-
- static inline void atomic_inc(atomic_t *v)
-@@ -55,6 +71,14 @@ static inline int atomic_dec_and_test(at
- return c != 0;
- }
-
-+static inline int atomic_dec_and_test_lt(volatile atomic_t *v)
-+{
-+ char c;
-+ __asm__ __volatile__("subql #1,%1; slt %0" : "=d" (c), "=m" (*v)
-+ : "m" (*v));
-+ return c != 0 ;
-+}
-+
- static inline int atomic_inc_and_test(atomic_t *v)
- {
- char c;
-@@ -167,9 +191,14 @@ static inline int atomic_sub_and_test(in
- static inline int atomic_add_negative(int i, atomic_t *v)
- {
- char c;
-+#ifndef CONFIG_COLDFIRE
- __asm__ __volatile__("addl %2,%1; smi %0"
- : "=d" (c), "+m" (*v)
- : "id" (i));
-+#else
-+ __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "=m" (*v)
-+ : "d" (i) , "m" (*v));
-+#endif
- return c != 0;
- }
-
---- a/arch/m68k/include/asm/bitops_mm.h
-+++ b/arch/m68k/include/asm/bitops_mm.h
-@@ -1,12 +1,18 @@
--#ifndef _M68K_BITOPS_H
--#define _M68K_BITOPS_H
- /*
- * Copyright 1992, Linus Torvalds.
- *
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-+#ifndef _M68K_BITOPS_H
-+#define _M68K_BITOPS_H
-+
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cf_bitops.h>
-+#else
-
- #ifndef _LINUX_BITOPS_H
- #error only <linux/bitops.h> can be included directly
-@@ -463,4 +469,6 @@ static inline unsigned long generic_find
-
- #endif /* __KERNEL__ */
-
-+#endif /* CONFIG_COLDFIRE */
-+
- #endif /* _M68K_BITOPS_H */
---- a/arch/m68k/include/asm/bootinfo.h
-+++ b/arch/m68k/include/asm/bootinfo.h
-@@ -2,6 +2,7 @@
- ** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure
- **
- ** Copyright 1992 by Greg Harp
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- **
- ** This file is subject to the terms and conditions of the GNU General Public
- ** License. See the file COPYING in the main directory of this archive
-@@ -24,6 +25,47 @@
- #ifndef _M68K_BOOTINFO_H
- #define _M68K_BOOTINFO_H
-
-+#ifndef __ASSEMBLY__
-+/*
-+ * UBoot Support
-+ *
-+ * bd_info structure from uboot1.3.2/arch/m68k/include/asm/u-boot.h
-+ */
-+struct bd_info {
-+ unsigned long bi_memstart; /* start of DRAM memory */
-+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
-+ unsigned long bi_flashstart; /* start of FLASH memory */
-+ unsigned long bi_flashsize; /* size of FLASH memory */
-+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
-+ unsigned long bi_sramstart; /* start of SRAM memory */
-+ unsigned long bi_sramsize; /* size of SRAM memory */
-+ unsigned long bi_mbar_base; /* base of internal registers */
-+ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
-+ unsigned long bi_boot_params; /* where this board expects params */
-+ unsigned long bi_ip_addr; /* IP Address */
-+ unsigned char bi_enet0addr[6]; /* Ethernet 0 mac address */
-+ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
-+ unsigned long bi_intfreq; /* Internal Freq, in MHz */
-+ unsigned long bi_busfreq; /* Bus Freq, in MHz */
-+#ifdef UBOOT_EXTRA_CLOCK
-+ unsigned long bi_inpfreq; /* input Freq in MHz */
-+ unsigned long bi_vcofreq; /* vco Freq in MHz */
-+ unsigned long bi_flbfreq; /* Flexbus Freq in MHz */
-+#endif
-+ unsigned long bi_baudrate; /* Console Baudrate */
-+ unsigned char bi_enet1addr[6]; /* eth1 mac address */
-+ unsigned char bi_enet2addr[6]; /* eth2 mac address */
-+ unsigned char bi_enet3addr[6]; /* eth3 mac address */
-+};
-+
-+struct uboot_record {
-+ struct bd_info *bdi;
-+ unsigned long initrd_start;
-+ unsigned long initrd_end;
-+ unsigned long cmd_line_start;
-+ unsigned long cmd_line_stop;
-+};
-+#endif /* __ASSEMBLY__ */
-
- /*
- * Bootinfo definitions
---- a/arch/m68k/include/asm/cacheflush_mm.h
-+++ b/arch/m68k/include/asm/cacheflush_mm.h
-@@ -1,3 +1,11 @@
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
- #ifndef _M68K_CACHEFLUSH_H
- #define _M68K_CACHEFLUSH_H
-
-@@ -6,6 +14,10 @@
- /* cache code */
- #define FLUSH_I_AND_D (0x00000808)
- #define FLUSH_I (0x00000008)
-+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cf_cacheflush.h>
-+#else /* !CONFIG_COLDFIRE */
-
- /*
- * Cache handling functions
-@@ -128,7 +140,6 @@ static inline void __flush_page_to_ram(v
- }
- }
-
--#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
- #define flush_dcache_page(page) __flush_page_to_ram(page_address(page))
- #define flush_dcache_mmap_lock(mapping) do { } while (0)
- #define flush_dcache_mmap_unlock(mapping) do { } while (0)
-@@ -154,4 +165,5 @@ static inline void copy_from_user_page(s
- memcpy(dst, src, len);
- }
-
-+#endif /* !CONFIG_COLDFIRE */
- #endif /* _M68K_CACHEFLUSH_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf-sram.h
-@@ -0,0 +1,21 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Lanttor.Guo@freescale.com
-+ *
-+ * Providing on-chip SRAM allocation and free APIs to kernel
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef CF_SRAM_H
-+#define CF_SRAM_H
-+
-+extern int declare_sram_pool(void *start, size_t size);
-+
-+extern void *sram_alloc(size_t len);
-+extern void sram_free(void *addr, size_t len);
-+
-+#endif
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_bitops.h
-@@ -0,0 +1,443 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+#ifndef __CF_BITOPS__
-+#define __CF_BITOPS__
-+
-+#ifndef _LINUX_BITOPS_H
-+#error only <linux/bitops.h> can be included directly
-+#endif
-+
-+#include <linux/compiler.h>
-+
-+#define test_and_set_bit(nr, vaddr) \
-+ (__builtin_constant_p(nr) ? \
-+ __constant_coldfire_test_and_set_bit(nr, vaddr) : \
-+ __generic_coldfire_test_and_set_bit(nr, vaddr))
-+
-+static inline int __constant_coldfire_test_and_set_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ char retval;
-+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+ __asm__ __volatile__ ("bset %2,(%4); sne %0"
-+ : "=d" (retval), "=m" (*p)
-+ : "di" (nr & 7), "m" (*p), "a" (p));
-+ return retval;
-+}
-+
-+static inline int __generic_coldfire_test_and_set_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ char retval;
-+
-+ __asm__ __volatile__ ("bset %2,%1; sne %0"
-+ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+ : "d" (nr)
-+ : "memory");
-+ return retval;
-+}
-+#define __test_and_set_bit(nr, vaddr) test_and_set_bit(nr, vaddr)
-+
-+#define set_bit(nr, vaddr) \
-+ (__builtin_constant_p(nr) ? \
-+ __constant_coldfire_set_bit(nr, vaddr) : \
-+ __generic_coldfire_set_bit(nr, vaddr))
-+
-+static inline void __constant_coldfire_set_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+ __asm__ __volatile__ ("bset %1,(%3)"
-+ : "=m" (*p) : "di" (nr & 7), "m" (*p), "a" (p));
-+}
-+
-+static inline void __generic_coldfire_set_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ __asm__ __volatile__ ("bset %1,%0"
-+ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+ : "d" (nr)
-+ : "memory");
-+}
-+#define __set_bit(nr, vaddr) set_bit(nr, vaddr)
-+
-+#define test_and_clear_bit(nr, vaddr) \
-+ (__builtin_constant_p(nr) ? \
-+ __constant_coldfire_test_and_clear_bit(nr, vaddr) : \
-+ __generic_coldfire_test_and_clear_bit(nr, vaddr))
-+
-+static inline int __constant_coldfire_test_and_clear_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ char retval;
-+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+
-+ __asm__ __volatile__ ("bclr %2,(%4); sne %0"
-+ : "=d" (retval), "=m" (*p)
-+ : "id" (nr & 7), "m" (*p), "a" (p));
-+
-+ return retval;
-+}
-+
-+static inline int __generic_coldfire_test_and_clear_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ char retval;
-+
-+ __asm__ __volatile__ ("bclr %2,%1; sne %0"
-+ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+ : "d" (nr & 7)
-+ : "memory");
-+
-+ return retval;
-+}
-+#define __test_and_clear_bit(nr, vaddr) test_and_clear_bit(nr, vaddr)
-+
-+/*
-+ * clear_bit() doesn't provide any barrier for the compiler.
-+ */
-+#define smp_mb__before_clear_bit() barrier()
-+#define smp_mb__after_clear_bit() barrier()
-+
-+#define clear_bit(nr, vaddr) \
-+ (__builtin_constant_p(nr) ? \
-+ __constant_coldfire_clear_bit(nr, vaddr) : \
-+ __generic_coldfire_clear_bit(nr, vaddr))
-+
-+static inline void __constant_coldfire_clear_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+ __asm__ __volatile__ ("bclr %1,(%3)"
-+ : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p));
-+}
-+
-+static inline void __generic_coldfire_clear_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ __asm__ __volatile__ ("bclr %1,%0"
-+ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+ : "d" (nr)
-+ : "memory");
-+}
-+#define __clear_bit(nr, vaddr) clear_bit(nr, vaddr)
-+
-+#define test_and_change_bit(nr, vaddr) \
-+ (__builtin_constant_p(nr) ? \
-+ __constant_coldfire_test_and_change_bit(nr, vaddr) : \
-+ __generic_coldfire_test_and_change_bit(nr, vaddr))
-+
-+static inline int __constant_coldfire_test_and_change_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ char retval;
-+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+
-+ __asm__ __volatile__ ("bchg %2,(%4); sne %0"
-+ : "=d" (retval), "=m" (*p)
-+ : "id" (nr & 7), "m" (*p), "a" (p));
-+
-+ return retval;
-+}
-+
-+static inline int __generic_coldfire_test_and_change_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ char retval;
-+
-+ __asm__ __volatile__ ("bchg %2,%1; sne %0"
-+ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+ : "id" (nr)
-+ : "memory");
-+
-+ return retval;
-+}
-+#define __test_and_change_bit(nr, vaddr) test_and_change_bit(nr, vaddr)
-+#define __change_bit(nr, vaddr) change_bit(nr, vaddr)
-+
-+#define change_bit(nr, vaddr) \
-+ (__builtin_constant_p(nr) ? \
-+ __constant_coldfire_change_bit(nr, vaddr) : \
-+ __generic_coldfire_change_bit(nr, vaddr))
-+
-+static inline void __constant_coldfire_change_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+ __asm__ __volatile__ ("bchg %1,(%3)"
-+ : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p));
-+}
-+
-+static inline void __generic_coldfire_change_bit(int nr,
-+ volatile void *vaddr)
-+{
-+ __asm__ __volatile__ ("bchg %1,%0"
-+ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+ : "d" (nr)
-+ : "memory");
-+}
-+
-+static inline int test_bit(int nr, const unsigned long *vaddr)
-+{
-+ return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
-+}
-+
-+static inline unsigned long ffz(unsigned long word)
-+{
-+ unsigned long result = 0;
-+
-+ while (word & 1) {
-+ result++;
-+ word >>= 1;
-+ }
-+ return result;
-+}
-+
-+/* find_next_zero_bit() finds the first zero bit in a bit string of length
-+ * 'size' bits, starting the search at bit 'offset'. This is largely based
-+ * on Linus's ALPHA routines.
-+ */
-+static inline unsigned long find_next_zero_bit(void *addr,
-+ unsigned long size, unsigned long offset)
-+{
-+ unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
-+ unsigned long result = offset & ~31UL;
-+ unsigned long tmp;
-+
-+ if (offset >= size)
-+ return size;
-+ size -= result;
-+ offset &= 31UL;
-+ if (offset) {
-+ tmp = *(p++);
-+ tmp |= ~0UL >> (32-offset);
-+ if (size < 32)
-+ goto found_first;
-+ if (~tmp)
-+ goto found_middle;
-+ size -= 32;
-+ result += 32;
-+ }
-+ while (size & ~31UL) {
-+ tmp = *(p++);
-+ if (~tmp)
-+ goto found_middle;
-+ result += 32;
-+ size -= 32;
-+ }
-+ if (!size)
-+ return result;
-+ tmp = *p;
-+
-+found_first:
-+ tmp |= ~0UL >> size;
-+found_middle:
-+ return result + ffz(tmp);
-+}
-+
-+#define find_first_zero_bit(addr, size) find_next_zero_bit(((void *)addr), \
-+ (size), 0)
-+
-+/* Ported from included/linux/bitops.h */
-+static inline int ffs(int x)
-+{
-+ int r = 1;
-+
-+ if (!x)
-+ return 0;
-+ if (!(x & 0xffff)) {
-+ x >>= 16;
-+ r += 16;
-+ }
-+ if (!(x & 0xff)) {
-+ x >>= 8;
-+ r += 8;
-+ }
-+ if (!(x & 0xf)) {
-+ x >>= 4;
-+ r += 4;
-+ }
-+ if (!(x & 3)) {
-+ x >>= 2;
-+ r += 2;
-+ }
-+ if (!(x & 1)) {
-+ x >>= 1;
-+ r += 1;
-+ }
-+ return r;
-+}
-+#define __ffs(x) (ffs(x) - 1)
-+
-+/* find_next_bit - find the next set bit in a memory region
-+ * (from asm-ppc/bitops.h)
-+ */
-+static inline unsigned long find_next_bit(const unsigned long *addr,
-+ unsigned long size, unsigned long offset)
-+{
-+ unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
-+ unsigned int result = offset & ~31UL;
-+ unsigned int tmp;
-+
-+ if (offset >= size)
-+ return size;
-+ size -= result;
-+ offset &= 31UL;
-+ if (offset) {
-+ tmp = *p++;
-+ tmp &= ~0UL << offset;
-+ if (size < 32)
-+ goto found_first;
-+ if (tmp)
-+ goto found_middle;
-+ size -= 32;
-+ result += 32;
-+ }
-+ while (size >= 32) {
-+ tmp = *p++;
-+ if (tmp != 0)
-+ goto found_middle;
-+ result += 32;
-+ size -= 32;
-+ }
-+ if (!size)
-+ return result;
-+ tmp = *p;
-+
-+found_first:
-+ tmp &= ~0UL >> (32 - size);
-+ if (tmp == 0UL) /* Are any bits set? */
-+ return result + size; /* Nope. */
-+found_middle:
-+ return result + __ffs(tmp);
-+}
-+
-+#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
-+
-+#ifdef __KERNEL__
-+
-+/* Ported from include/linux/bitops.h */
-+static inline int fls(int x)
-+{
-+ int r = 32;
-+
-+ if (!x)
-+ return 0;
-+ if (!(x & 0xffff0000u)) {
-+ x <<= 16;
-+ r -= 16;
-+ }
-+ if (!(x & 0xff000000u)) {
-+ x <<= 8;
-+ r -= 8;
-+ }
-+ if (!(x & 0xf0000000u)) {
-+ x <<= 4;
-+ r -= 4;
-+ }
-+ if (!(x & 0xc0000000u)) {
-+ x <<= 2;
-+ r -= 2;
-+ }
-+ if (!(x & 0x80000000u)) {
-+ x <<= 1;
-+ r -= 1;
-+ }
-+ return r;
-+}
-+
-+static inline int __fls(int x)
-+{
-+ return fls(x) - 1;
-+}
-+
-+#include <asm-generic/bitops/fls64.h>
-+#include <asm-generic/bitops/sched.h>
-+#include <asm-generic/bitops/hweight.h>
-+#include <asm-generic/bitops/lock.h>
-+
-+#define minix_find_first_zero_bit(addr, size) find_next_zero_bit((addr), \
-+ (size), 0)
-+#define minix_test_and_set_bit(nr, addr) test_and_set_bit((nr), \
-+ (unsigned long *)(addr))
-+#define minix_set_bit(nr, addr) set_bit((nr), \
-+ (unsigned long *)(addr))
-+#define minix_test_and_clear_bit(nr, addr) test_and_clear_bit((nr), \
-+ (unsigned long *)(addr))
-+
-+static inline int minix_test_bit(int nr, const volatile unsigned long *vaddr)
-+{
-+ int *a = (int *)vaddr;
-+ int mask;
-+
-+ a += nr >> 5;
-+ mask = 1 << (nr & 0x1f);
-+ return ((mask & *a) != 0);
-+}
-+
-+#define ext2_set_bit(nr, addr) test_and_set_bit((nr) ^ 24, \
-+ (unsigned long *)(addr))
-+#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, \
-+ (unsigned long *)(addr))
-+#define ext2_clear_bit(nr, addr) test_and_clear_bit((nr) ^ 24, \
-+ (unsigned long *)(addr))
-+#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, \
-+ (unsigned long *)(addr))
-+
-+static inline int ext2_test_bit(int nr, const void *vaddr)
-+{
-+ const unsigned char *p = vaddr;
-+ return (p[nr >> 3] & (1U << (nr & 7))) != 0;
-+}
-+
-+static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
-+{
-+ const unsigned long *p = vaddr, *addr = vaddr;
-+ int res;
-+
-+ if (!size)
-+ return 0;
-+
-+ size = (size >> 5) + ((size & 31) > 0);
-+ while (*p++ == ~0UL) {
-+ if (--size == 0)
-+ return (p - addr) << 5;
-+ }
-+
-+ --p;
-+ for (res = 0; res < 32; res++)
-+ if (!ext2_test_bit(res, p))
-+ break;
-+ return (p - addr) * 32 + res;
-+}
-+
-+static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
-+ unsigned offset)
-+{
-+ const unsigned long *addr = vaddr;
-+ const unsigned long *p = addr + (offset >> 5);
-+ int bit = offset & 31UL, res;
-+
-+ if (offset >= size)
-+ return size;
-+
-+ if (bit) {
-+ /* Look for zero in first longword */
-+ for (res = bit; res < 32; res++)
-+ if (!ext2_test_bit(res, p))
-+ return (p - addr) * 32 + res;
-+ p++;
-+ }
-+ /* No zero yet, search remaining full bytes for a zero */
-+ res = ext2_find_first_zero_bit(p, size - 32 * (p - addr));
-+ return (p - addr) * 32 + res;
-+}
-+
-+#endif /* KERNEL */
-+
-+#endif /* __CF_BITOPS__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_cacheflush.h
-@@ -0,0 +1,20 @@
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#ifndef M68K_CF_CACHEFLUSH_H
-+#define M68K_CF_CACHEFLUSH_H
-+
-+#ifdef CONFIG_M5445X
-+#include "cf_5445x_cacheflush.h"
-+#elif defined(CONFIG_M5441X)
-+#include "cf_5441x_cacheflush.h"
-+#elif defined(CONFIG_M547X_8X)
-+#include "cf_548x_cacheflush.h"
-+#endif
-+
-+#endif /* M68K_CF_CACHEFLUSH_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_entry.h
-@@ -0,0 +1,153 @@
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#ifndef __CF_M68K_ENTRY_H
-+#define __CF_M68K_ENTRY_H
-+
-+#include <asm/setup.h>
-+#include <asm/page.h>
-+#include <asm/coldfire.h>
-+#include <asm/cfmmu.h>
-+
-+/*
-+ * Stack layout in 'ret_from_exception':
-+ *
-+ * This allows access to the syscall arguments in registers d1-d5
-+ *
-+ * 0(sp) - d1
-+ * 4(sp) - d2
-+ * 8(sp) - d3
-+ * C(sp) - d4
-+ * 10(sp) - d5
-+ * 14(sp) - a0
-+ * 18(sp) - a1
-+ * 1C(sp) - a2
-+ * 20(sp) - d0
-+ * 24(sp) - orig_d0
-+ * 28(sp) - stack adjustment
-+ * 2C(sp) - sr
-+ * 2E(sp) - pc
-+ * 32(sp) - format & vector
-+ * 36(sp) - MMUSR
-+ * 3A(sp) - MMUAR
-+ */
-+
-+/*
-+ * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
-+ * the whole kernel.
-+ */
-+
-+/* the following macro is used when enabling interrupts */
-+/* portable version */
-+#define ALLOWINT (~0x700)
-+#define MAX_NOINT_IPL 0
-+
-+#ifdef __ASSEMBLY__
-+
-+#define curptr a2
-+
-+LFLUSH_I_AND_D = 0x00000808
-+LSIGTRAP = 5
-+
-+/* process bits for task_struct.ptrace */
-+PT_TRACESYS_OFF = 3
-+PT_TRACESYS_BIT = 1
-+PT_PTRACED_OFF = 3
-+PT_PTRACED_BIT = 0
-+PT_DTRACE_OFF = 3
-+PT_DTRACE_BIT = 2
-+
-+#define SAVE_ALL_INT save_all_int
-+#define SAVE_ALL_SYS save_all_sys
-+#define RESTORE_ALL restore_all
-+/*
-+ * This defines the normal kernel pt-regs layout.
-+ *
-+ * regs a3-a6 and d6-d7 are preserved by C code
-+ * the kernel doesn't mess with usp unless it needs to
-+ */
-+
-+/*
-+ * a -1 in the orig_d0 field signifies
-+ * that the stack frame is NOT for syscall
-+ */
-+.macro save_all_int
-+ movel MMUSR, % sp@ -
-+ movel MMUAR, % sp@ -
-+ clrl % sp@ - | stk_adj
-+ pea - 1 : w | orig d0
-+ movel % d0, % sp@ - | d0
-+ subal #(8*4), % sp
-+ moveml % d1-%d5/%a0-%a1/%curptr, % sp@
-+.endm
-+
-+.macro save_all_sys
-+ movel MMUSR, % sp@-
-+ movel MMUAR, % sp@-
-+ clrl % sp@ - | stk_adj
-+ movel % d0, % sp@ - | orig d0
-+ movel % d0, % sp@ - | d0
-+ subal #(8*4), % sp
-+ moveml % d1-%d5/%a0-%a1/%curptr, % sp@
-+.endm
-+
-+.macro restore_all
-+ moveml % sp@, % a0-%a1/%curptr/%d1-%d5
-+ addal #(8*4), % sp
-+ movel % sp@+, % d0 | d0
-+ addql #4, % sp | orig d0
-+ addl % sp@+, % sp | stk_adj
-+ addql #8, % sp | MMUAR & MMUSR
-+ rte
-+.endm
-+
-+#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
-+
-+#define SAVE_SWITCH_STACK save_switch_stack
-+#define RESTORE_SWITCH_STACK restore_switch_stack
-+#define GET_CURRENT(tmp) get_current tmp
-+
-+.macro save_switch_stack
-+ subal #(6*4), % sp
-+ moveml % a3-%a6/%d6-%d7, % sp@
-+.endm
-+
-+.macro restore_switch_stack
-+ moveml % sp@, % a3-%a6/%d6-%d7
-+ addal #(6*4), % sp
-+.endm
-+
-+.macro get_current reg = % d0
-+ movel % sp, \reg
-+ andl #-THREAD_SIZE, \reg
-+ movel \reg, % curptr
-+ movel % curptr@, % curptr
-+.endm
-+
-+#else /* C source */
-+
-+#define STR(X) STR1(X)
-+#define STR1(X) #X
-+
-+#define PT_OFF_ORIG_D0 0x24
-+#define PT_OFF_FORMATVEC 0x32
-+#define PT_OFF_SR 0x2C
-+#define SAVE_ALL_INT \
-+ "clrl %%sp@-;" /* stk_adj */ \
-+ "pea -1:w;" /* orig d0 = -1 */ \
-+ "movel %%d0,%%sp@-;" /* d0 */ \
-+ "subal #(8*4),%sp" \
-+ "moveml %%d1-%%d5/%%a0-%%a2,%%sp@"
-+#define GET_CURRENT(tmp) \
-+ "movel %%sp,"#tmp"\n\t" \
-+ "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
-+ "movel "#tmp",%%a2\n\t"
-+
-+#endif
-+
-+#endif /* __CF_M68K_ENTRY_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_io.h
-@@ -0,0 +1,185 @@
-+/*
-+ * linux/include/asm-m68k/cf_io.h
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * 9/30/08 JKM - Separated Coldfire pieces out from m68k.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#ifndef __CF_IO__
-+#define __CF_IO__
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/compiler.h>
-+#include <asm/raw_io.h>
-+#include <asm/virtconvert.h>
-+
-+#include <asm-generic/iomap.h>
-+
-+#define readb_relaxed(addr) readb(addr)
-+#define readw_relaxed(addr) readw(addr)
-+#define readl_relaxed(addr) readl(addr)
-+
-+#ifdef CONFIG_PCI
-+
-+/*
-+ * IO space in Coldfire
-+ */
-+#define inb_p inb
-+#define inw_p inw
-+#define inl_p inl
-+#define outb_p outb
-+#define outw_p outw
-+#define outl_p outl
-+
-+#ifndef CONFIG_COLDFIRE
-+#define inb(port) in_8(port)
-+#define outb(val, port) out_8((port), (val))
-+#define inw(port) in_le16(port)
-+#define outw(val, port) out_le16((port), (val))
-+#define inl(port) in_le32(port)
-+#define outl(val, port) out_le32((port), (val))
-+#define insb(port, buf, nr) \
-+ raw_insb((u8 *)(port), (u8 *)(buf), (nr))
-+#define outsb(port, buf, nr) \
-+ raw_outsb((u8 *)(port), (u8 *)(buf), (nr))
-+#define insw(port, buf, nr) \
-+ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr))
-+#define outsw(port, buf, nr) \
-+ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr))
-+#define insl(port, buf, nr) \
-+ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
-+#define outsl(port, buf, nr) \
-+ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
-+#else
-+#define inb(port) pci_inb(port)
-+#define outb(val, port) pci_outb((val), (port))
-+#define inw(port) pci_inw(port)
-+#define outw(val, port) pci_outw((val), (port))
-+#define insb(a, b, c) \
-+ pci_insb((volatile unsigned char *)a, (unsigned char *)b, c)
-+#define insw(a, b, c) \
-+ pci_insw((volatile unsigned short *)a, (unsigned short *)b, c)
-+#define insl(a, b, c) \
-+ pci_insl((volatile unsigned long *)a, (unsigned long *)b, c)
-+#define outsb(a, b, c) \
-+ pci_outsb((volatile unsigned char *)a, (const unsigned char *)b, c)
-+#define outsw(a, b, c) \
-+ pci_outsw((volatile unsigned short *)a, (const unsigned short *)b, c)
-+#define outsl(a, b, c) \
-+ pci_outsl((volatile unsigned long *)a, (const unsigned long *)b, c)
-+#define inl(port) pci_inl(port)
-+#define outl(val, port) pci_outl((val), (port))
-+#endif
-+
-+#else
-+/* no pci */
-+
-+#define inb(port) in_8(port)
-+#define outb(val, port) out_8((port), (val))
-+#define inw(port) in_le16(port)
-+#define outw(val, port) out_le16((port), (val))
-+#define inl(port) in_le32(port)
-+#define outl(val, port) out_le32((port), (val))
-+#define insb(port, buf, nr) \
-+ raw_insb((u8 *)(port), (u8 *)(buf), (nr))
-+#define outsb(port, buf, nr) \
-+ raw_outsb((u8 *)(port), (u8 *)(buf), (nr))
-+#define insw(port, buf, nr) \
-+ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr))
-+#define outsw(port, buf, nr) \
-+ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr))
-+#define insl(port, buf, nr) \
-+ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
-+#define outsl(port, buf, nr) \
-+ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
-+
-+#endif /* CONFIG_PCI */
-+
-+#define mmiowb()
-+
-+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
-+{
-+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-+}
-+static inline void __iomem *ioremap_nocache(unsigned long physaddr,
-+ unsigned long size)
-+{
-+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-+}
-+static inline void __iomem *ioremap_writethrough(unsigned long physaddr,
-+ unsigned long size)
-+{
-+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-+}
-+static inline void __iomem *ioremap_fullcache(unsigned long physaddr,
-+ unsigned long size)
-+{
-+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-+}
-+
-+static inline void memset_io(volatile void __iomem *addr,
-+ unsigned char val, int count)
-+{
-+ __builtin_memset((void __force *) addr, val, count);
-+}
-+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
-+ int count)
-+{
-+ __builtin_memcpy(dst, (void __force *) src, count);
-+}
-+static inline void memcpy_toio(volatile void __iomem *dst,
-+ const void *src, int count)
-+{
-+ __builtin_memcpy((void __force *) dst, src, count);
-+}
-+
-+#define IO_SPACE_LIMIT 0xffffffff
-+
-+#endif /* __KERNEL__ */
-+
-+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1
-+
-+/*
-+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
-+ * access
-+ */
-+#define xlate_dev_mem_ptr(p) __va(p)
-+
-+/*
-+ * Convert a virtual cached pointer to an uncached pointer
-+ */
-+#define xlate_dev_kmem_ptr(p) p
-+
-+#define __raw_readb(addr) \
-+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-+#define __raw_readw(addr) \
-+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-+#define __raw_readl(addr) \
-+ ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
-+#define __raw_writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-+#define __raw_writew(b, addr) \
-+ (void)((*(volatile unsigned short *) (addr)) = (b))
-+#define __raw_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-+
-+#define memset_io(a, b, c) memset((void *)(a), (b), (c))
-+#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
-+#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
-+
-+#if !defined(readb)
-+#define readb(addr) \
-+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-+#define readw(addr) \
-+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-+#define readl(addr) \
-+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-+#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-+#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-+#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-+#endif /* readb */
-+
-+#endif /* _IO_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_pgalloc.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#ifndef M68K_CF_PGALLOC_H
-+#define M68K_CF_PGALLOC_H
-+#include <linux/highmem.h>
-+#include <asm/coldfire.h>
-+#include <asm/page.h>
-+#include <asm/cf_tlbflush.h>
-+#include <asm/cf_cacheflush.h>
-+
-+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-+{
-+ free_page((unsigned long) pte);
-+}
-+
-+extern const char bad_pmd_string[];
-+
-+extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-+ unsigned long address)
-+{
-+ unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT);
-+
-+ if (!page)
-+ return NULL;
-+
-+ memset((void *)page, 0, PAGE_SIZE);
-+ return (pte_t *) (page);
-+}
-+
-+extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address)
-+{
-+ return (pmd_t *) pgd;
-+}
-+
-+#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
-+#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
-+
-+#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr)
-+
-+#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \
-+ (unsigned long)(page_address(page)))
-+
-+#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte))
-+
-+#define pmd_pgtable(pmd) pmd_page(pmd)
-+
-+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page,
-+ unsigned long address)
-+{
-+ __free_page(page);
-+}
-+
-+#define __pmd_free_tlb(tlb, pmd, address) do { } while (0)
-+
-+static inline struct page *pte_alloc_one(struct mm_struct *mm,
-+ unsigned long address)
-+{
-+ struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
-+ pte_t *pte;
-+
-+ if (!page)
-+ return NULL;
-+
-+ pte = kmap(page);
-+ if (pte) {
-+ clear_page(pte);
-+ __flush_page_to_ram(pte);
-+ flush_tlb_kernel_page(pte);
-+ nocache_page(pte);
-+ }
-+ kunmap(page);
-+
-+ return page;
-+}
-+
-+extern inline void pte_free(struct mm_struct *mm, struct page *page)
-+{
-+ __free_page(page);
-+}
-+
-+/*
-+ * In our implementation, each pgd entry contains 1 pmd that is never allocated
-+ * or freed. pgd_present is always 1, so this should never be called. -NL
-+ */
-+#define pmd_free(mm, pmd) BUG()
-+
-+extern inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-+{
-+ free_page((unsigned long) pgd);
-+}
-+
-+extern inline pgd_t *pgd_alloc(struct mm_struct *mm)
-+{
-+ pgd_t *new_pgd;
-+
-+ new_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_NOWARN);
-+ if (!new_pgd)
-+ return NULL;
-+ memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
-+ memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT);
-+ return new_pgd;
-+}
-+
-+#define pgd_populate(mm, pmd, pte) BUG()
-+
-+#endif /* M68K_CF_PGALLOC_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_pgtable.h
-@@ -0,0 +1,364 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#ifndef _CF_PGTABLE_H
-+#define _CF_PGTABLE_H
-+
-+#include <asm/cfmmu.h>
-+#include <asm/page.h>
-+
-+#ifndef __ASSEMBLY__
-+#include <asm/virtconvert.h>
-+#include <linux/linkage.h>
-+
-+/* For virtual address to physical address conversion */
-+#define VTOP(addr) __pa(addr)
-+#define PTOV(addr) __va(addr)
-+
-+
-+#endif /* !__ASSEMBLY__ */
-+
-+/* Page protection values within PTE. */
-+
-+/* MMUDR bits, in proper place. */
-+#define CF_PAGE_LOCKED (0x00000002)
-+#define CF_PAGE_EXEC (0x00000004)
-+#define CF_PAGE_WRITABLE (0x00000008)
-+#define CF_PAGE_READABLE (0x00000010)
-+#define CF_PAGE_SYSTEM (0x00000020)
-+#define CF_PAGE_COPYBACK (0x00000040)
-+#define CF_PAGE_NOCACHE (0x00000080)
-+
-+#define CF_CACHEMASK (~0x00000040)
-+#define CF_PAGE_MMUDR_MASK (0x000000fe)
-+
-+#define _PAGE_NOCACHE030 (CF_PAGE_NOCACHE)
-+
-+/* MMUTR bits, need shifting down. */
-+#define CF_PAGE_VALID (0x00000400)
-+#define CF_PAGE_SHARED (0x00000800)
-+
-+#define CF_PAGE_MMUTR_MASK (0x00000c00)
-+#define CF_PAGE_MMUTR_SHIFT (10)
-+#define CF_ASID_MMU_SHIFT (2)
-+
-+/* Fake bits, not implemented in CF, will get masked out before
-+ hitting hardware, and might go away altogether once this port is
-+ complete. */
-+#if PAGE_SHIFT < 13
-+#error COLDFIRE Error: Pages must be at least 8k in size
-+#endif
-+#define CF_PAGE_ACCESSED (0x00001000)
-+#define CF_PAGE_FILE (0x00000200)
-+#define CF_PAGE_DIRTY (0x00000001)
-+
-+#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */
-+#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */
-+#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */
-+#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */
-+#define _DESCTYPE_MASK 0x003
-+#define _CACHEMASK040 (~0x060)
-+#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */
-+
-+
-+/* Externally used page protection values. */
-+#define _PAGE_PRESENT (CF_PAGE_VALID)
-+#define _PAGE_ACCESSED (CF_PAGE_ACCESSED)
-+#define _PAGE_DIRTY (CF_PAGE_DIRTY)
-+#define _PAGE_READWRITE (CF_PAGE_WRITABLE \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_SHARED \
-+ | CF_PAGE_SYSTEM)
-+
-+/* Compound page protection values. */
-+#define PAGE_NONE __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED)
-+
-+#define PAGE_SHARED __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_ACCESSED)
-+
-+#define PAGE_INIT __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_EXEC \
-+ | CF_PAGE_SYSTEM \
-+ | CF_PAGE_SHARED)
-+
-+#define PAGE_KERNEL __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_EXEC \
-+ | CF_PAGE_SYSTEM \
-+ | CF_PAGE_SHARED \
-+ | CF_PAGE_ACCESSED)
-+
-+#define PAGE_COPY __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_READABLE)
-+
-+/*
-+ * Page protections for initialising protection_map. See mm/mmap.c
-+ * for use. In general, the bit positions are xwr, and P-items are
-+ * private, the S-items are shared.
-+ */
-+
-+#define __P000 PAGE_NONE
-+#define __P100 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_EXEC)
-+#define __P010 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_ACCESSED)
-+#define __P110 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_EXEC)
-+#define __P001 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_READABLE)
-+#define __P101 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_EXEC)
-+#define __P011 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_ACCESSED)
-+#define __P111 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_EXEC)
-+
-+#define __S000 PAGE_NONE
-+#define __S100 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_EXEC)
-+#define __S010 PAGE_SHARED
-+#define __S110 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_EXEC)
-+#define __S001 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_READABLE)
-+#define __S101 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_EXEC)
-+#define __S011 PAGE_SHARED
-+#define __S111 __pgprot(CF_PAGE_VALID \
-+ | CF_PAGE_ACCESSED \
-+ | CF_PAGE_READABLE \
-+ | CF_PAGE_WRITABLE \
-+ | CF_PAGE_EXEC)
-+
-+#define PTE_MASK PAGE_MASK
-+#define CF_PAGE_CHG_MASK (PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY)
-+
-+#ifndef __ASSEMBLY__
-+
-+/*
-+ * Conversion functions: convert a page and protection to a page entry,
-+ * and a page entry and page directory to the page they refer to.
-+ */
-+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-+
-+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-+{
-+ pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot);
-+ return pte;
-+}
-+
-+#define pmd_set(pmdp, ptep) do {} while (0)
-+
-+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
-+{
-+ pgd_val(*pgdp) = virt_to_phys(pmdp);
-+}
-+
-+#define __pte_page(pte) \
-+ ((unsigned long) ((pte_val(pte) & CF_PAGE_PGNUM_MASK) + PAGE_OFFSET))
-+#define __pmd_page(pmd) ((unsigned long) (pmd_val(pmd)))
-+
-+extern inline int pte_none(pte_t pte)
-+{
-+ return !pte_val(pte);
-+}
-+extern inline int pte_present(pte_t pte)
-+{
-+ return pte_val(pte) & CF_PAGE_VALID;
-+}
-+extern inline void pte_clear(struct mm_struct *mm, unsigned long addr,
-+ pte_t *ptep)
-+{
-+ pte_val(*ptep) = 0;
-+}
-+
-+#define pte_pagenr(pte) ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
-+#define pte_page(pte) virt_to_page(__pte_page(pte))
-+
-+extern inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); }
-+#define pmd_none(pmd) pmd_none2(&(pmd))
-+extern inline int pmd_bad2(pmd_t *pmd) { return 0; }
-+#define pmd_bad(pmd) pmd_bad2(&(pmd))
-+#define pmd_present(pmd) (!pmd_none2(&(pmd)))
-+extern inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; }
-+
-+extern inline int pgd_none(pgd_t pgd) { return 0; }
-+extern inline int pgd_bad(pgd_t pgd) { return 0; }
-+extern inline int pgd_present(pgd_t pgd) { return 1; }
-+extern inline void pgd_clear(pgd_t *pgdp) {}
-+
-+
-+#define pte_ERROR(e) \
-+ printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
-+ __FILE__, __LINE__, pte_val(e))
-+#define pmd_ERROR(e) \
-+ printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \
-+ __FILE__, __LINE__, pmd_val(e))
-+#define pgd_ERROR(e) \
-+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
-+ __FILE__, __LINE__, pgd_val(e))
-+
-+
-+/*
-+ * The following only work if pte_present() is true.
-+ * Undefined behaviour if not...
-+ * [we have the full set here even if they don't change from m68k]
-+ */
-+extern inline int pte_read(pte_t pte) \
-+ { return pte_val(pte) & CF_PAGE_READABLE; }
-+extern inline int pte_write(pte_t pte) \
-+ { return pte_val(pte) & CF_PAGE_WRITABLE; }
-+extern inline int pte_exec(pte_t pte) \
-+ { return pte_val(pte) & CF_PAGE_EXEC; }
-+extern inline int pte_dirty(pte_t pte) \
-+ { return pte_val(pte) & CF_PAGE_DIRTY; }
-+extern inline int pte_young(pte_t pte) \
-+ { return pte_val(pte) & CF_PAGE_ACCESSED; }
-+extern inline int pte_file(pte_t pte) \
-+ { return pte_val(pte) & CF_PAGE_FILE; }
-+static inline int pte_special(pte_t pte) { return 0; }
-+
-+
-+extern inline pte_t pte_wrprotect(pte_t pte) \
-+ { pte_val(pte) &= ~CF_PAGE_WRITABLE; return pte; }
-+extern inline pte_t pte_rdprotect(pte_t pte) \
-+ { pte_val(pte) &= ~CF_PAGE_READABLE; return pte; }
-+extern inline pte_t pte_exprotect(pte_t pte) \
-+ { pte_val(pte) &= ~CF_PAGE_EXEC; return pte; }
-+extern inline pte_t pte_mkclean(pte_t pte) \
-+ { pte_val(pte) &= ~CF_PAGE_DIRTY; return pte; }
-+extern inline pte_t pte_mkold(pte_t pte) \
-+ { pte_val(pte) &= ~CF_PAGE_ACCESSED; return pte; }
-+extern inline pte_t pte_mkwrite(pte_t pte) \
-+ { pte_val(pte) |= CF_PAGE_WRITABLE; return pte; }
-+extern inline pte_t pte_mkread(pte_t pte) \
-+ { pte_val(pte) |= CF_PAGE_READABLE; return pte; }
-+extern inline pte_t pte_mkexec(pte_t pte) \
-+ { pte_val(pte) |= CF_PAGE_EXEC; return pte; }
-+extern inline pte_t pte_mkdirty(pte_t pte) \
-+ { pte_val(pte) |= CF_PAGE_DIRTY; return pte; }
-+extern inline pte_t pte_mkyoung(pte_t pte) \
-+ { pte_val(pte) |= CF_PAGE_ACCESSED; return pte; }
-+extern inline pte_t pte_mknocache(pte_t pte) \
-+ { pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40); return pte; }
-+extern inline pte_t pte_mkcache(pte_t pte) \
-+ { pte_val(pte) &= ~CF_PAGE_NOCACHE; return pte; }
-+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-+
-+
-+#define swapper_pg_dir kernel_pg_dir
-+extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
-+
-+/* Find an entry in a pagetable directory. */
-+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
-+
-+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-+
-+/* Find an entry in a kernel pagetable directory. */
-+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-+
-+/* Find an entry in the second-level pagetable. */
-+extern inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address)
-+{
-+ return (pmd_t *) pgd;
-+}
-+
-+/* Find an entry in the third-level pagetable. */
-+#define __pte_offset(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-+#define pte_offset_kernel(dir, address) ((pte_t *) __pmd_page(*(dir)) + \
-+ __pte_offset(address))
-+
-+/* Disable caching for page at given kernel virtual address. */
-+static inline void nocache_page(void *vaddr)
-+{
-+ pgd_t *dir;
-+ pmd_t *pmdp;
-+ pte_t *ptep;
-+ unsigned long addr = (unsigned long)vaddr;
-+
-+ dir = pgd_offset_k(addr);
-+ pmdp = pmd_offset(dir, addr);
-+ ptep = pte_offset_kernel(pmdp, addr);
-+ *ptep = pte_mknocache(*ptep);
-+}
-+
-+/* Enable caching for page at given kernel virtual address. */
-+static inline void cache_page(void *vaddr)
-+{
-+ pgd_t *dir;
-+ pmd_t *pmdp;
-+ pte_t *ptep;
-+ unsigned long addr = (unsigned long)vaddr;
-+
-+ dir = pgd_offset_k(addr);
-+ pmdp = pmd_offset(dir, addr);
-+ ptep = pte_offset_kernel(pmdp, addr);
-+ *ptep = pte_mkcache(*ptep);
-+}
-+
-+#define PTE_FILE_MAX_BITS 21
-+#define PTE_FILE_SHIFT 11
-+
-+static inline unsigned long pte_to_pgoff(pte_t pte)
-+{
-+ return pte_val(pte) >> PTE_FILE_SHIFT;
-+}
-+
-+static inline pte_t pgoff_to_pte(unsigned pgoff)
-+{
-+ pte_t pte = __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE);
-+ return pte;
-+}
-+
-+/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
-+#define __swp_entry(type, offset) ((swp_entry_t) { (type) | \
-+ (offset << PTE_FILE_SHIFT) })
-+#define __swp_type(x) ((x).val & 0xFF)
-+#define __swp_offset(x) ((x).val >> PTE_FILE_SHIFT)
-+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-+#define __swp_entry_to_pte(x) (__pte((x).val))
-+
-+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
-+
-+#define pte_offset_map(pmdp, address) ((pte_t *)__pmd_page(*pmdp) + \
-+ __pte_offset(address))
-+#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address)
-+#define pte_unmap(pte) do { } while (0)
-+#define pte_unmap_nested(pte) kunmap(pte)
-+
-+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
-+
-+
-+#endif /* !__ASSEMBLY__ */
-+#endif /* !_CF_PGTABLE_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_raw_io.h
-@@ -0,0 +1,188 @@
-+/*
-+ * linux/include/asm-m68k/cf_raw_io.h
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * 09/30/08 JKM: split Coldfire pieces into separate file
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+#ifndef __CF_RAW_IO__
-+#define __CF_RAW_IO__
-+
-+#ifdef __KERNEL__
-+
-+#include <asm/types.h>
-+
-+/* Values for nocacheflag and cmode */
-+#define IOMAP_FULL_CACHING 0
-+#define IOMAP_NOCACHE_SER 1
-+#define IOMAP_NOCACHE_NONSER 2
-+#define IOMAP_WRITETHROUGH 3
-+
-+extern void iounmap(void __iomem *addr);
-+
-+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
-+ int cacheflag);
-+extern void __iounmap(void *addr, unsigned long size);
-+
-+
-+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
-+ * two accesses to memory, which may be undesirable for some devices.
-+ */
-+#define in_8(addr) \
-+ ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; })
-+#define in_be16(addr) \
-+ ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
-+#define in_be32(addr) \
-+ ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; })
-+#define in_le16(addr) \
-+ ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; })
-+#define in_le32(addr) \
-+ ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; })
-+
-+#define out_8(addr, b) (void)((*(__force volatile u8 *) (addr)) = (b))
-+#define out_be16(addr, w) (void)((*(__force volatile u16 *) (addr)) = (w))
-+#define out_be32(addr, l) (void)((*(__force volatile u32 *) (addr)) = (l))
-+#define out_le16(addr, w) \
-+ (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
-+#define out_le32(addr, l) \
-+ (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
-+
-+
-+#ifdef CONFIG_PCI
-+/* pci */
-+unsigned char pci_inb(long addr);
-+unsigned short pci_inw(long addr);
-+unsigned long pci_inl(long addr);
-+
-+void pci_outb(unsigned char val, long addr);
-+void pci_outw(unsigned short val, long addr);
-+void pci_outl(unsigned long val, long addr);
-+
-+void pci_insb(volatile unsigned char *addr,
-+ unsigned char *buf, int len);
-+void pci_insw(volatile unsigned short *addr,
-+ unsigned short *buf, int len);
-+void pci_insl(volatile unsigned long *addr,
-+ unsigned long *buf, int len);
-+
-+void pci_outsb(volatile unsigned char *addr,
-+ const unsigned char *buf, int len);
-+void pci_outsw(volatile unsigned short *addr,
-+ const unsigned short *buf, int len);
-+void pci_outsl(volatile unsigned long *addr,
-+ const unsigned long *buf, int len);
-+
-+unsigned short pci_raw_inw(long addr);
-+unsigned long pci_raw_inl(long addr);
-+void pci_raw_outw(unsigned short val, long addr);
-+void pci_raw_outl(unsigned long val, long addr);
-+
-+#define raw_inb(port) pci_inb((long)((volatile unsigned char *)(port)))
-+#define raw_inw(port) pci_raw_inw((long)((volatile unsigned short *)(port)))
-+#define raw_inl(port) pci_raw_inl((long)((volatile unsigned long *)(port)))
-+
-+#define raw_outb(val, port) \
-+ pci_outb((val), (long)((volatile unsigned char *)(port)))
-+#define raw_outw(val, port) \
-+ pci_raw_outw((val), (long)((volatile unsigned short *)(port)))
-+#define raw_outl(val, port) \
-+ pci_raw_outl((val), (long)((volatile unsigned long *)(port)))
-+
-+#define swap_inw(port) pci_inw((long)((volatile unsigned short *)(port)))
-+#define swap_outw(val, port) \
-+ pci_outw((val), (long)((volatile unsigned short *)(port)))
-+
-+#else
-+/* non-pci */
-+#define raw_inb in_8
-+#define raw_inw in_be16
-+#define raw_inl in_be32
-+
-+#define raw_outb(val, port) out_8((port), (val))
-+#define raw_outw(val, port) out_be16((port), (val))
-+#define raw_outl(val, port) out_be32((port), (val))
-+
-+#define swap_inw(port) in_le16((port))
-+#define swap_outw(val, port) out_le16((port), (val))
-+#endif
-+
-+static inline void raw_insb(volatile u8 __iomem *port,
-+ u8 *buf, unsigned int len)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < len; i++)
-+ *buf++ = in_8(port);
-+}
-+
-+static inline void raw_outsb(volatile u8 __iomem *port, const u8 *buf,
-+ unsigned int len)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < len; i++)
-+ out_8(port, *buf++);
-+}
-+
-+static inline void raw_insw(volatile u16 *port, u16 *buf, unsigned int nr)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < nr; i++)
-+ *buf++ = raw_inw(port);
-+}
-+
-+static inline void raw_outsw(volatile u16 *port, const u16 *buf,
-+ unsigned int nr)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < nr; i++, buf++)
-+ raw_outw(*buf, port);
-+}
-+
-+static inline void raw_insl(volatile u32 *port, u32 *buf, unsigned int nr)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < nr; i++)
-+ *buf++ = raw_inl(port);
-+}
-+
-+static inline void raw_outsl(volatile u32 *port, const u32 *buf,
-+ unsigned int nr)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < nr; i++, buf++)
-+ raw_outl(*buf, port);
-+}
-+
-+static inline void raw_insw_swapw(volatile u16 *port, u16 *buf,
-+ unsigned int nr)
-+{
-+#ifdef UNDEF
-+ unsigned int i;
-+
-+ for (i = 0; i < nr; i++)
-+ *buf++ = in_le16(port);
-+#endif
-+}
-+
-+static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
-+ unsigned int nr)
-+{
-+#ifdef UNDEF
-+ unsigned int i;
-+
-+ for (i = 0; i < nr; i++, buf++)
-+ out_le16(port, *buf);
-+#endif
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* __CF_RAW_IO__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_tlbflush.h
-@@ -0,0 +1,66 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+#ifndef M68K_CF_TLBFLUSH_H
-+#define M68K_CF_TLBFLUSH_H
-+
-+#include <asm/coldfire.h>
-+
-+/* Flush all userspace mappings. */
-+static inline void flush_tlb_all(void)
-+{
-+ preempt_disable();
-+ *MMUOR = MMUOR_CNL;
-+ preempt_enable();
-+}
-+
-+/* Clear user TLB entries within the context named in mm */
-+static inline void flush_tlb_mm(struct mm_struct *mm)
-+{
-+ preempt_disable();
-+ *MMUOR = MMUOR_CNL;
-+ preempt_enable();
-+}
-+
-+/* Flush a single TLB page. */
-+static inline void flush_tlb_page(struct vm_area_struct *vma,
-+ unsigned long addr)
-+{
-+ preempt_disable();
-+ *MMUOR = MMUOR_CNL;
-+ preempt_enable();
-+}
-+/* Flush a range of pages from TLB. */
-+
-+static inline void flush_tlb_range(struct vm_area_struct *mm,
-+ unsigned long start, unsigned long end)
-+{
-+ preempt_disable();
-+ *MMUOR = MMUOR_CNL;
-+ preempt_enable();
-+}
-+
-+/* Flush kernel page from TLB. */
-+static inline void flush_tlb_kernel_page(void *addr)
-+{
-+ preempt_disable();
-+ *MMUOR = MMUOR_CNL;
-+ preempt_enable();
-+}
-+
-+static inline void flush_tlb_kernel_range(unsigned long start,
-+ unsigned long end)
-+{
-+ flush_tlb_all();
-+}
-+
-+extern inline void flush_tlb_pgtables(struct mm_struct *mm,
-+ unsigned long start, unsigned long end)
-+{
-+}
-+
-+#endif /* M68K_CF_TLBFLUSH_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_uaccess.h
-@@ -0,0 +1,262 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+#ifndef __M68K_CF_UACCESS_H
-+#define __M68K_CF_UACCESS_H
-+
-+/*
-+ * User space memory access functions
-+ */
-+
-+/* The "moves" command is not available in the CF instruction set. */
-+#include <linux/compiler.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/sched.h>
-+#include <asm/segment.h>
-+
-+#define VERIFY_READ 0
-+#define VERIFY_WRITE 1
-+
-+/* We let the MMU do all checking */
-+#define access_ok(type, addr, size) 1
-+
-+/*
-+ * The exception table consists of pairs of addresses: the first is the
-+ * address of an instruction that is allowed to fault, and the second is
-+ * the address at which the program should continue. No registers are
-+ * modified, so it is entirely up to the continuation code to figure out
-+ * what to do.
-+ *
-+ * All the routines below use bits of fixup code that are out of line
-+ * with the main instruction path. This means when everything is well,
-+ * we don't even have to jump over them. Further, they do not intrude
-+ * on our cache or tlb entries.
-+ */
-+
-+struct exception_table_entry {
-+ unsigned long insn, fixup;
-+};
-+
-+extern int __put_user_bad(void);
-+extern int __get_user_bad(void);
-+
-+#define __put_user_asm(res, x, ptr, bwl, reg, err) \
-+asm volatile ("\n" \
-+ "1: move."#bwl" %2,%1\n" \
-+ "2:\n" \
-+ " .section .fixup,\"ax\"\n" \
-+ " .even\n" \
-+ "10: moveq.l %3,%0\n" \
-+ " jra 2b\n" \
-+ " .previous\n" \
-+ "\n" \
-+ " .section __ex_table,\"a\"\n" \
-+ " .align 4\n" \
-+ " .long 1b,10b\n" \
-+ " .long 2b,10b\n" \
-+ " .previous" \
-+ : "+d" (res), "=m" (*(ptr)) \
-+ : #reg(x), "i" (err))
-+
-+/*
-+ * These are the main single-value transfer routines. They automatically
-+ * use the right size if we just have the right pointer type.
-+ */
-+
-+#define __put_user(x, ptr) \
-+({ \
-+ typeof(*(ptr)) __pu_val = (x); \
-+ int __pu_err = 0; \
-+ __chk_user_ptr(ptr); \
-+ switch (sizeof(*(ptr))) { \
-+ case 1: \
-+ __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \
-+ break; \
-+ case 2: \
-+ __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \
-+ break; \
-+ case 4: \
-+ __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \
-+ break; \
-+ case 8: \
-+ { \
-+ const void __user *__pu_ptr = (ptr); \
-+ asm volatile ("\n" \
-+ "1: move.l %2,(%1)+\n" \
-+ "2: move.l %R2,(%1)\n" \
-+ "3:\n" \
-+ " .section .fixup,\"ax\"\n" \
-+ " .even\n" \
-+ "10: movel %3,%0\n" \
-+ " jra 3b\n" \
-+ " .previous\n" \
-+ "\n" \
-+ " .section __ex_table,\"a\"\n" \
-+ " .align 4\n" \
-+ " .long 1b,10b\n" \
-+ " .long 2b,10b\n" \
-+ " .long 3b,10b\n" \
-+ " .previous" \
-+ : "+d" (__pu_err), "+a" (__pu_ptr) \
-+ : "r" (__pu_val), "i" (-EFAULT) \
-+ : "memory"); \
-+ break; \
-+ } \
-+ default: \
-+ __pu_err = __put_user_bad(); \
-+ break; \
-+ } \
-+ __pu_err; \
-+})
-+#define put_user(x, ptr) __put_user(x, ptr)
-+
-+
-+#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \
-+ type __gu_val; \
-+ asm volatile ("\n" \
-+ "1: move."#bwl" %2,%1\n" \
-+ "2:\n" \
-+ " .section .fixup,\"ax\"\n" \
-+ " .even\n" \
-+ "10: move.l %3,%0\n" \
-+ " subl %1,%1\n" \
-+ " jra 2b\n" \
-+ " .previous\n" \
-+ "\n" \
-+ " .section __ex_table,\"a\"\n" \
-+ " .align 4\n" \
-+ " .long 1b,10b\n" \
-+ " .previous" \
-+ : "+d" (res), "=&" #reg(__gu_val) \
-+ : "m" (*(ptr)), "i" (err)); \
-+ (x) = (typeof(*(ptr)))(unsigned long)__gu_val; \
-+})
-+
-+#define __get_user(x, ptr) \
-+({ \
-+ int __gu_err = 0; \
-+ __chk_user_ptr(ptr); \
-+ switch (sizeof(*(ptr))) { \
-+ case 1: \
-+ __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \
-+ break; \
-+ case 2: \
-+ __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT); \
-+ break; \
-+ case 4: \
-+ __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \
-+ break; \
-+/* case 8: disabled because gcc-4.1 has a broken typeof \
-+ { \
-+ const void *__gu_ptr = (ptr); \
-+ u64 __gu_val; \
-+ asm volatile ("\n" \
-+ "1: move.l (%2)+,%1\n" \
-+ "2: move.l (%2),%R1\n" \
-+ "3:\n" \
-+ " .section .fixup,\"ax\"\n" \
-+ " .even\n" \
-+ "10: move.l %3,%0\n" \
-+ " subl %1,%1\n" \
-+ " subl %R1,%R1\n" \
-+ " jra 3b\n" \
-+ " .previous\n" \
-+ "\n" \
-+ " .section __ex_table,\"a\"\n" \
-+ " .align 4\n" \
-+ " .long 1b,10b\n" \
-+ " .long 2b,10b\n" \
-+ " .previous" \
-+ : "+d" (__gu_err), "=&r" (__gu_val), \
-+ "+a" (__gu_ptr) \
-+ : "i" (-EFAULT) \
-+ : "memory"); \
-+ (x) = (typeof(*(ptr)))__gu_val; \
-+ break; \
-+ } */ \
-+ default : \
-+ __gu_err = __get_user_bad(); \
-+ break; \
-+ } \
-+ __gu_err; \
-+})
-+#define get_user(x, ptr) __get_user(x, ptr)
-+
-+unsigned long __generic_copy_from_user(void *to, const void __user *from,
-+ unsigned long n);
-+unsigned long __generic_copy_to_user(void __user *to, const void *from,
-+ unsigned long n);
-+
-+#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
-+ asm volatile ("\n" \
-+ "1: move."#s1" (%2)+,%3\n" \
-+ " move."#s1" %3,(%1)+\n" \
-+ "2: move."#s2" (%2)+,%3\n" \
-+ " move."#s2" %3,(%1)+\n" \
-+ " .ifnc \""#s3"\",\"\"\n" \
-+ "3: move."#s3" (%2)+,%3\n" \
-+ " move."#s3" %3,(%1)+\n" \
-+ " .endif\n" \
-+ "4:\n" \
-+ " .section __ex_table,\"a\"\n" \
-+ " .align 4\n" \
-+ " .long 1b,10f\n" \
-+ " .long 2b,20f\n" \
-+ " .ifnc \""#s3"\",\"\"\n" \
-+ " .long 3b,30f\n" \
-+ " .endif\n" \
-+ " .previous\n" \
-+ "\n" \
-+ " .section .fixup,\"ax\"\n" \
-+ " .even\n" \
-+ "10: clr."#s1" (%1)+\n" \
-+ "20: clr."#s2" (%1)+\n" \
-+ " .ifnc \""#s3"\",\"\"\n" \
-+ "30: clr."#s3" (%1)+\n" \
-+ " .endif\n" \
-+ " moveq.l #"#n",%0\n" \
-+ " jra 4b\n" \
-+ " .previous\n" \
-+ : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \
-+ : : "memory")
-+
-+#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \
-+ asm volatile ("\n" \
-+ " move."#s1" (%2)+,%3\n" \
-+ "11: move."#s1" %3,(%1)+\n" \
-+ "12: move."#s2" (%2)+,%3\n" \
-+ "21: move."#s2" %3,(%1)+\n" \
-+ "22:\n" \
-+ " .ifnc \""#s3"\",\"\"\n" \
-+ " move."#s3" (%2)+,%3\n" \
-+ "31: move."#s3" %3,(%1)+\n" \
-+ "32:\n" \
-+ " .endif\n" \
-+ "4:\n" \
-+ "\n" \
-+ " .section __ex_table,\"a\"\n" \
-+ " .align 4\n" \
-+ " .long 11b,5f\n" \
-+ " .long 12b,5f\n" \
-+ " .long 21b,5f\n" \
-+ " .long 22b,5f\n" \
-+ " .ifnc \""#s3"\",\"\"\n" \
-+ " .long 31b,5f\n" \
-+ " .long 32b,5f\n" \
-+ " .endif\n" \
-+ " .previous\n" \
-+ "\n" \
-+ " .section .fixup,\"ax\"\n" \
-+ " .even\n" \
-+ "5: moveq.l #"#n",%0\n" \
-+ " jra 4b\n" \
-+ " .previous\n" \
-+ : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \
-+ : : "memory")
-+
-+#endif /* _M68K_CF_UACCESS_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_virtconvert.h
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+#ifndef __CF_VIRTCONVERT__
-+#define __CF_VIRTCONVERT__
-+
-+/*
-+ * Macros used for converting between virtual and physical mappings.
-+ *
-+ * Coldfire Specific
-+ */
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/compiler.h>
-+#include <linux/mmzone.h>
-+#include <asm/setup.h>
-+#include <asm/page.h>
-+
-+/*
-+ * Change virtual addresses to physical addresses and vv.
-+ */
-+static inline unsigned long virt_to_phys(void *address)
-+{
-+ return __pa(address);
-+}
-+
-+static inline void *phys_to_virt(unsigned long address)
-+{
-+ return __va(address);
-+}
-+
-+/* Permanent address of a page. */
-+#ifdef CONFIG_SINGLE_MEMORY_CHUNK
-+#define page_to_phys(page) \
-+ __pa(PAGE_OFFSET + \
-+ (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
-+#else
-+#define page_to_phys(_page) ({ \
-+ struct page *__page = _page; \
-+ struct pglist_data *pgdat; \
-+ pgdat = pg_data_table[page_to_nid(__page)]; \
-+ page_to_pfn(__page) << PAGE_SHIFT; \
-+})
-+#endif
-+
-+/*
-+ * IO bus memory addresses are 1:1 with the physical address,
-+ */
-+#ifdef CONFIG_PCI
-+#define virt_to_bus(a) (a + PCI_DMA_BASE)
-+#define bus_to_virt(a) (a - PCI_DMA_BASE)
-+#else
-+#define virt_to_bus(a) (a)
-+#define bus_to_virt(a) (a)
-+#endif
-+
-+#endif /* __KERNEL__ */
-+#endif /* __CF_VIRTCONVERT__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/cfcache.h
-@@ -0,0 +1,146 @@
-+/*
-+ * include/asm-m68k/cfcache.h - Coldfire Cache Controller
-+ *
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef CF_CFCACHE_H
-+#define CF_CFCACHE_H
-+
-+/*
-+ * CACR Cache Control Register
-+ */
-+#define CF_CACR_DEC (0x80000000) /* Data Cache Enable */
-+#define CF_CACR_DW (0x40000000) /* Data default Write-protect */
-+#define CF_CACR_DESB (0x20000000) /* Data Enable Store Buffer */
-+#define CF_CACR_DPI (0x10000000) /* Data Disable CPUSHL Invalidate */
-+#define CF_CACR_DHLCK (0x08000000) /* 1/2 Data Cache Lock Mode */
-+#define CF_CACR_DDCM_00 (0x00000000) /* Cacheable writethrough imprecise */
-+#define CF_CACR_DDCM_01 (0x02000000) /* Cacheable copyback */
-+#define CF_CACR_DDCM_10 (0x04000000) /* Noncacheable precise */
-+#define CF_CACR_DDCM_11 (0x06000000) /* Noncacheable imprecise */
-+#define CF_CACR_DCINVA (0x01000000) /* Data Cache Invalidate All */
-+#define CF_CACR_DDSP (0x00800000) /* Data default supervisor-protect */
-+#define CF_CACR_IVO (0x00100000) /* Invalidate only */
-+#define CF_CACR_BEC (0x00080000) /* Branch Cache Enable */
-+#define CF_CACR_BCINVA (0x00040000) /* Branch Cache Invalidate All */
-+#define CF_CACR_IEC (0x00008000) /* Instruction Cache Enable */
-+#define CF_CACR_SPA (0x00004000) /* Search by Physical Address */
-+#define CF_CACR_DNFB (0x00002000) /* Default cache-inhibited fill buf */
-+#define CF_CACR_IDPI (0x00001000) /* Instr Disable CPUSHL Invalidate */
-+#define CF_CACR_IHLCK (0x00000800) /* 1/2 Instruction Cache Lock Mode */
-+#define CF_CACR_IDCM (0x00000400) /* Noncacheable Instr default mode */
-+#define CF_CACR_ICINVA (0x00000100) /* Instr Cache Invalidate All */
-+#define CF_CACR_IDSP (0x00000080) /* Ins default supervisor-protect */
-+#define CF_CACR_EUSP (0x00000020) /* Switch stacks in user mode */
-+
-+#ifdef CONFIG_M5445X
-+/*
-+ * M5445x Cache Configuration
-+ * - cache line size is 16 bytes
-+ * - cache is 4-way set associative
-+ * - each cache has 256 sets (64k / 16bytes / 4way)
-+ * - I-Cache size is 16KB
-+ * - D-Cache size is 16KB
-+ */
-+#define ICACHE_SIZE 0x4000 /* instruction - 16k */
-+#define DCACHE_SIZE 0x4000 /* data - 16k */
-+
-+#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */
-+#define CACHE_SETS 0x0100 /* 256 sets */
-+#define CACHE_WAYS 0x0004 /* 4 way */
-+
-+#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+ \
-+ CF_CACR_BCINVA+ \
-+ CF_CACR_ICINVA)
-+
-+#ifndef CONFIG_M5445X_DISABLE_CACHE
-+#define CACHE_INITIAL_MODE (CF_CACR_DEC+ \
-+ CF_CACR_BEC+ \
-+ CF_CACR_IEC+ \
-+ CF_CACR_DESB+ \
-+ CF_CACR_EUSP)
-+#else
-+/* cache disabled for testing */
-+#define CACHE_INITIAL_MODE (CF_CACR_EUSP)
-+#endif /* CONFIG_M5445X_DISABLE_CACHE */
-+
-+#elif defined(CONFIG_M547X_8X)
-+/*
-+ * * M547x/M548x Cache Configuration
-+ * * - cache line size is 16 bytes
-+ * * - cache is 4-way set associative
-+ * * - each cache has 512 sets (128k / 16bytes / 4way)
-+ * * - I-Cache size is 32KB
-+ * * - D-Cache size is 32KB
-+ * */
-+#define ICACHE_SIZE 0x8000 /* instruction - 32k */
-+#define DCACHE_SIZE 0x8000 /* data - 32k */
-+
-+#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */
-+#define CACHE_SETS 0x0200 /* 512 sets */
-+#define CACHE_WAYS 0x0004 /* 4 way */
-+
-+/* in for the old cpushl caching code */
-+#define _DCACHE_SET_MASK ((DCACHE_SIZE/64-1)<<CACHE_WAYS)
-+#define _ICACHE_SET_MASK ((ICACHE_SIZE/64-1)<<CACHE_WAYS)
-+#define LAST_DCACHE_ADDR _DCACHE_SET_MASK
-+#define LAST_ICACHE_ADDR _ICACHE_SET_MASK
-+
-+#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+ \
-+ CF_CACR_BCINVA+ \
-+ CF_CACR_ICINVA)
-+
-+#define CACHE_INITIAL_MODE (CF_CACR_DEC+ \
-+ CF_CACR_BEC+ \
-+ CF_CACR_IEC+ \
-+ CF_CACR_DESB+ \
-+ CF_CACR_EUSP)
-+#elif defined(CONFIG_M5441X)
-+/*
-+ * M5441x Cache Configuration
-+ * - cache line size is 16 bytes
-+ * - cache is 4-way set associative
-+ * - each cache has 128 sets (8k / 16bytes / 4way)
-+ * - I-Cache size is 8KB
-+ * - D-Cache size is 8KB
-+ */
-+#define ICACHE_SIZE 0x2000 /* instruction - 8k */
-+#define DCACHE_SIZE 0x2000 /* data - 8k */
-+
-+#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */
-+#define CACHE_SETS 0x0080 /* 128 sets */
-+#define CACHE_WAYS 0x0004 /* 4 way */
-+
-+#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+ \
-+ CF_CACR_BCINVA+ \
-+ CF_CACR_ICINVA)
-+
-+#ifndef CONFIG_M5441X_DISABLE_CACHE
-+#define CACHE_INITIAL_MODE (CF_CACR_DEC+ \
-+ CF_CACR_BEC+ \
-+ CF_CACR_IEC+ \
-+ CF_CACR_DESB+ \
-+ CF_CACR_DDCM_01+ \
-+ CF_CACR_EUSP)
-+#else
-+/* cache disabled for testing */
-+#define CACHE_INITIAL_MODE (CF_CACR_EUSP)
-+#endif /* CONFIG_M5441X_DISABLE_CACHE */
-+
-+#endif
-+
-+#ifndef __ASSEMBLY__
-+
-+extern unsigned long shadow_cacr;
-+extern void cacr_set(unsigned long x);
-+
-+#endif /* !__ASSEMBLY__ */
-+
-+#endif /* CF_CACHE_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/cfmmu.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Definitions for Coldfire V4e MMU
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+#include <asm/movs.h>
-+
-+#ifndef __CF_MMU_H__
-+#define __CF_MMU_H__
-+
-+
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
-+#define MMU_BASE 0xE8000000
-+#elif defined(CONFIG_M5441X)
-+#define MMU_BASE 0xD8000000
-+#endif
-+
-+#define MMUCR (MMU_BASE+0x00)
-+#define MMUCR_ASMN 1
-+#define MMUCR_ASM (1<<MMUCR_ASMN)
-+#define MMUCR_ENN 0
-+#define MMUCR_EN (1<<MMUCR_ENN)
-+
-+#define MMUOR REG16(MMU_BASE+0x04+0x02)
-+#define MMUOR_AAN 16
-+#define MMUOR_AA (0xffff<<MMUOR_AAN)
-+#define MMUOR_STLBN 8
-+#define MMUOR_STLB (1<<MMUOR_STLBN)
-+#define MMUOR_CAN 7
-+#define MMUOR_CA (1<<MMUOR_CAN)
-+#define MMUOR_CNLN 6
-+#define MMUOR_CNL (1<<MMUOR_CNLN)
-+#define MMUOR_CASN 5
-+#define MMUOR_CAS (1<<MMUOR_CASN)
-+#define MMUOR_ITLBN 4
-+#define MMUOR_ITLB (1<<MMUOR_ITLBN)
-+#define MMUOR_ADRN 3
-+#define MMUOR_ADR (1<<MMUOR_ADRN)
-+#define MMUOR_RWN 2
-+#define MMUOR_RW (1<<MMUOR_RWN)
-+#define MMUOR_ACCN 1
-+#define MMUOR_ACC (1<<MMUOR_ACCN)
-+#define MMUOR_UAAN 0
-+#define MMUOR_UAA (1<<MMUOR_UAAN)
-+
-+#define MMUSR REG32(MMU_BASE+0x08)
-+#define MMUSR_SPFN 5
-+#define MMUSR_SPF (1<<MMUSR_SPFN)
-+#define MMUSR_RFN 4
-+#define MMUSR_RF (1<<MMUSR_RFN)
-+#define MMUSR_WFN 3
-+#define MMUSR_WF (1<<MMUSR_WFN)
-+#define MMUSR_HITN 1
-+#define MMUSR_HIT (1<<MMUSR_HITN)
-+
-+#define MMUAR REG32(MMU_BASE+0x10)
-+#define MMUAR_VPN 1
-+#define MMUAR_VP (0xfffffffe)
-+#define MMUAR_SN 0
-+#define MMUAR_S (1<<MMUAR_SN)
-+
-+#define MMUTR REG32(MMU_BASE+0x14)
-+#define MMUTR_VAN 10
-+#define MMUTR_VA (0xfffffc00)
-+#define MMUTR_IDN 2
-+#define MMUTR_ID (0xff<<MMUTR_IDN)
-+#define MMUTR_SGN 1
-+#define MMUTR_SG (1<<MMUTR_SGN)
-+#define MMUTR_VN 0
-+#define MMUTR_V (1<<MMUTR_VN)
-+
-+#define MMUDR REG32(MMU_BASE+0x18)
-+#define MMUDR_PAN 10
-+#define MMUDR_PA (0xfffffc00)
-+#define MMUDR_SZN 8
-+#define MMUDR_SZ_MASK (0x2<<MMUDR_SZN)
-+#define MMUDR_SZ1M (0<<MMUDR_SZN)
-+#define MMUDR_SZ4K (1<<MMUDR_SZN)
-+#define MMUDR_SZ8K (2<<MMUDR_SZN)
-+#define MMUDR_SZ16M (3<<MMUDR_SZN)
-+#define MMUDR_CMN 6
-+#define MMUDR_INC (2<<MMUDR_CMN)
-+#define MMUDR_IC (0<<MMUDR_CMN)
-+#define MMUDR_DWT (0<<MMUDR_CMN)
-+#define MMUDR_DCB (1<<MMUDR_CMN)
-+#define MMUDR_DNCP (2<<MMUDR_CMN)
-+#define MMUDR_DNCIP (3<<MMUDR_CMN)
-+#define MMUDR_SPN 5
-+#define MMUDR_SP (1<<MMUDR_SPN)
-+#define MMUDR_RN 4
-+#define MMUDR_R (1<<MMUDR_RN)
-+#define MMUDR_WN 3
-+#define MMUDR_W (1<<MMUDR_WN)
-+#define MMUDR_XN 2
-+#define MMUDR_X (1<<MMUDR_XN)
-+#define MMUDR_LKN 1
-+#define MMUDR_LK (1<<MMUDR_LKN)
-+
-+
-+#ifndef __ASSEMBLY__
-+#define CF_PMEGS_NUM 256
-+#define CF_INVALID_CONTEXT 255
-+#define CF_PAGE_PGNUM_MASK (PAGE_MASK)
-+
-+extern int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb,
-+ int extension_word);
-+#endif /* __ASSEMBLY__*/
-+
-+#endif /* !__CF_MMU_H__ */
---- a/arch/m68k/include/asm/coldfire.h
-+++ b/arch/m68k/include/asm/coldfire.h
-@@ -5,6 +5,13 @@
- *
- * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo (www.lineo.com)
-+ *
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Right Reserved.
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
-
- /****************************************************************************/
-@@ -19,27 +26,78 @@
- * here. Also the peripheral clock (bus clock) divide ratio is set
- * at config time too.
- */
-+/*FIXME Jason*/
-+#if 0
- #ifdef CONFIG_CLOCK_SET
- #define MCF_CLK CONFIG_CLOCK_FREQ
- #define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
- #else
- #error "Don't know what your ColdFire CPU clock frequency is??"
- #endif
-+#endif
-+
-+
-+#define MCF_CLK CONFIG_MCFCLK
-+#define MCF_BUSCLK (CONFIG_MCFCLK/2)
-+
-+
-+#if defined(CONFIG_M520x)
-+#define MCF_IPSBAR 0xFC000000
-+#else
-+#define MCF_IPSBAR 0x40000000
-+#endif
-
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+#define MCF_MBAR 0x0
-+/*
-+ * Even though RAMBAR1 macro should be in the 0x8xxxxxxx range,
-+ * here set the CONFIG_SDRAM_BASE value to it to use
-+ * SDRAM memory, not SRAM memory.
-+ */
-+#define MCF_RAMBAR1 (CONFIG_SDRAM_BASE)
-+#elif defined(CONFIG_M547X_8X)
-+#define MCF_MBAR 0xF0000000
-+#define MCF_MMUBAR 0xF1000000
-+#define MCF_RAMBAR0 0xF3000000
-+#define MCF_RAMBAR1 0xF3001000
-+#else
- /*
- * Define the processor support peripherals base address.
- * This is generally setup by the boards start up code.
- */
- #define MCF_MBAR 0x10000000
- #define MCF_MBAR2 0x80000000
--#if defined(CONFIG_M54xx)
--#define MCF_IPSBAR MCF_MBAR
--#elif defined(CONFIG_M520x)
--#define MCF_IPSBAR 0xFC000000
--#else
--#define MCF_IPSBAR 0x40000000
- #endif
-
-+#ifdef __ASSEMBLY__
-+#define REG32
-+#define REG16
-+#define REG08
-+#else /* __ASSEMBLY__ */
-+#define REG32(x) ((volatile unsigned long *)(x))
-+#define REG16(x) ((volatile unsigned short *)(x))
-+#define REG08(x) ((volatile unsigned char *)(x))
-+
-+#define MCF_REG32(x) (*(volatile unsigned long *)(MCF_MBAR+(x)))
-+#define MCF_REG16(x) (*(volatile unsigned short *)(MCF_MBAR+(x)))
-+#define MCF_REG08(x) (*(volatile unsigned char *)(MCF_MBAR+(x)))
-+
-+void cacr_set(unsigned long);
-+unsigned long cacr_get(void);
-+
-+#define coldfire_enable_irq0(irq) MCF_INTC0_CIMR = (irq);
-+
-+#define coldfire_enable_irq1(irq) MCF_INTC1_CIMR = (irq);
-+
-+#define coldfire_disable_irq0(irq) MCF_INTC0_SIMR = (irq);
-+
-+#define coldfire_disable_irq1(irq) MCF_INTC1_SIMR = (irq);
-+
-+#define getiprh() MCF_INTC0_IPRH
-+
-+#endif /* __ASSEMBLY__ */
-+
-+
- #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x)
- #undef MCF_MBAR
---- a/arch/m68k/include/asm/delay_mm.h
-+++ b/arch/m68k/include/asm/delay_mm.h
-@@ -1,18 +1,41 @@
--#ifndef _M68K_DELAY_H
--#define _M68K_DELAY_H
--
--#include <asm/param.h>
--
- /*
- * Copyright (C) 1994 Hamish Macdonald
- *
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ *
- * Delay routines, using a pre-computed "loops_per_jiffy" value.
- */
-
-+#ifndef _M68K_DELAY_H
-+#define _M68K_DELAY_H
-+
-+#include <asm/param.h>
-+
- static inline void __delay(unsigned long loops)
- {
-+#if defined(CONFIG_COLDFIRE)
-+ /* The coldfire runs this loop at significantly different speeds
-+ * depending upon long word alignment or not. We'll pad it to
-+ * long word alignment which is the faster version.
-+ * The 0x4a8e is of course a 'tstl %fp' instruction. This is better
-+ * than using a NOP (0x4e71) instruction because it executes in one
-+ * cycle not three and doesn't allow for an arbitary delay waiting
-+ * for bus cycles to finish. Also fp/a6 isn't likely to cause a
-+ * stall waiting for the register to become valid if such is added
-+ * to the coldfire at some stage.
-+ */
-+ __asm__ __volatile__ (".balignw 4, 0x4a8e\n\t"
-+ "1: subql #1, %0\n\t"
-+ "jcc 1b"
-+ : "=d" (loops) : "0" (loops));
-+#else
- __asm__ __volatile__ ("1: subql #1,%0; jcc 1b"
- : "=d" (loops) : "0" (loops));
-+#endif
- }
-
- extern void __bad_udelay(void);
-@@ -26,12 +49,17 @@ extern void __bad_udelay(void);
- */
- static inline void __const_udelay(unsigned long xloops)
- {
-+#if defined(CONFIG_COLDFIRE)
-+
-+ __delay(((((unsigned long long) xloops * loops_per_jiffy))>>32)*HZ);
-+#else
- unsigned long tmp;
-
- __asm__ ("mulul %2,%0:%1"
- : "=d" (xloops), "=d" (tmp)
- : "d" (xloops), "1" (loops_per_jiffy));
- __delay(xloops * HZ);
-+#endif
- }
-
- static inline void __udelay(unsigned long usecs)
-@@ -46,12 +74,16 @@ static inline void __udelay(unsigned lon
- static inline unsigned long muldiv(unsigned long a, unsigned long b,
- unsigned long c)
- {
-+#if defined(CONFIG_COLDFIRE)
-+ return (long)(((unsigned long long)a * b)/c);
-+#else
- unsigned long tmp;
-
- __asm__ ("mulul %2,%0:%1; divul %3,%0:%1"
- : "=d" (tmp), "=d" (a)
- : "d" (b), "d" (c), "1" (a));
- return a;
-+#endif
- }
-
- #endif /* defined(_M68K_DELAY_H) */
---- a/arch/m68k/include/asm/div64.h
-+++ b/arch/m68k/include/asm/div64.h
-@@ -1,12 +1,17 @@
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_DIV64_H
- #define _M68K_DIV64_H
-
--#ifdef CONFIG_MMU
--
-+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
- #include <linux/types.h>
-
- /* n = n / base; return rem; */
--
- #define do_div(n, base) ({ \
- union { \
- unsigned long n32[2]; \
---- a/arch/m68k/include/asm/dma.h
-+++ b/arch/m68k/include/asm/dma.h
-@@ -1,7 +1,10 @@
--#ifndef _M68K_DMA_H
--#define _M68K_DMA_H 1
--
--#ifdef CONFIG_COLDFIRE
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- /*
- * ColdFire DMA Model:
- * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
-@@ -25,6 +28,11 @@
- * Arthur Shipkowski (art@videon-central.com)
- */
-
-+#ifndef _M68K_DMA_H
-+#define _M68K_DMA_H 1
-+
-+#ifdef CONFIG_COLDFIRE
-+
- #include <asm/coldfire.h>
- #include <asm/mcfsim.h>
- #include <asm/mcfdma.h>
-@@ -479,13 +487,106 @@ static __inline__ int get_dma_residue(un
-
- /* it's useless on the m68k, but unfortunately needed by the new
- bootmem allocator (but this should do it for this) */
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
-+#define MAX_DMA_ADDRESS 0xefffffff
-+#elif defined(CONFIG_M5441X)
-+#define MAX_DMA_ADDRESS 0xdfffffff
-+#else
- #define MAX_DMA_ADDRESS PAGE_OFFSET
-+#endif
-
-+#ifndef CONFIG_COLDFIRE
- #define MAX_DMA_CHANNELS 8
-
- extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
- extern void free_dma(unsigned int dmanr); /* release it again */
-
-+#else /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484)
-+ || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */
-+/************************************************
-+ * Multichannel DMA definitions *
-+ ************************************************/
-+#ifdef CONFIG_MCD_DMA
-+#include <asm/MCD_dma.h>
-+#include <asm/m5485dma.h>
-+
-+struct scatterlist;
-+
-+#define MAX_DMA_CHANNELS NCHANNELS
-+/*
-+ * identifiers for each initiator/requestor
-+ */
-+#define DMA_ALWAYS (0)
-+#define DMA_DSPI_RX (1)
-+#define DMA_DSPI_TX (2)
-+#define DMA_DREQ0 (3)
-+#define DMA_PSC0_RX (4)
-+#define DMA_PSC0_TX (5)
-+#define DMA_USBEP0 (6)
-+#define DMA_USBEP1 (7)
-+#define DMA_USBEP2 (8)
-+#define DMA_USBEP3 (9)
-+#define DMA_PCI_TX (10)
-+#define DMA_PCI_RX (11)
-+#define DMA_PSC1_RX (12)
-+#define DMA_PSC1_TX (13)
-+#define DMA_I2C_RX (14)
-+#define DMA_I2C_TX (15)
-+#define DMA_FEC0_RX (16)
-+#define DMA_FEC0_TX (17)
-+#define DMA_FEC1_RX (18)
-+#define DMA_FEC1_TX (19)
-+#define DMA_DREQ1 (20)
-+#define DMA_CTM0 (21)
-+#define DMA_CTM1 (22)
-+#define DMA_CTM2 (23)
-+#define DMA_CTM3 (24)
-+#define DMA_CTM4 (25)
-+#define DMA_CTM5 (26)
-+#define DMA_CTM6 (27)
-+#define DMA_CTM7 (28)
-+#define DMA_USBEP4 (29)
-+#define DMA_USBEP5 (30)
-+#define DMA_USBEP6 (31)
-+#define DMA_PSC2_RX (32)
-+#define DMA_PSC2_TX (33)
-+#define DMA_PSC3_RX (34)
-+#define DMA_PSC3_TX (35)
-+#define DMA_FEC_RX(x) ((x == 0) ? DMA_FEC0_RX : DMA_FEC1_RX)
-+#define DMA_FEC_TX(x) ((x == 0) ? DMA_FEC0_TX : DMA_FEC1_TX)
-+
-+int dma_set_initiator(int);
-+unsigned int dma_get_initiator(int);
-+void dma_remove_initiator(int);
-+int dma_set_channel(int);
-+int dma_get_channel(int);
-+void dma_remove_channel(int);
-+int dma_set_channel_fec(int requestor);
-+int dma_connect(int channel, int address);
-+int dma_disconnect(int channel);
-+void dma_remove_channel_by_number(int channel);
-+int dma_init(void);
-+#endif
-+
-+extern spinlock_t dma_spin_lock;
-+
-+static inline unsigned long claim_dma_lock(void)
-+{
-+ unsigned long flags;
-+ spin_lock_irqsave(&dma_spin_lock, flags);
-+ return flags;
-+}
-+
-+static inline void release_dma_lock(unsigned long flags)
-+{
-+ spin_unlock_irqrestore(&dma_spin_lock, flags);
-+}
-+#endif
-+
-+#ifdef CONFIG_PCI
-+extern int isa_dma_bridge_buggy;
-+#else
- #define isa_dma_bridge_buggy (0)
-+#endif
-
- #endif /* _M68K_DMA_H */
---- a/arch/m68k/include/asm/elf.h
-+++ b/arch/m68k/include/asm/elf.h
-@@ -1,10 +1,17 @@
--#ifndef __ASMm68k_ELF_H
--#define __ASMm68k_ELF_H
--
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- /*
- * ELF register definitions..
- */
-
-+#ifndef __ASMm68k_ELF_H
-+#define __ASMm68k_ELF_H
-+
- #include <asm/ptrace.h>
- #include <asm/user.h>
-
-@@ -34,6 +41,26 @@
- #define R_68K_GLOB_DAT 20
- #define R_68K_JMP_SLOT 21
- #define R_68K_RELATIVE 22
-+/* TLS static relocations */
-+#define R_68K_TLS_GD32 25
-+#define R_68K_TLS_GD16 26
-+#define R_68K_TLS_GD8 27
-+#define R_68K_TLS_LDM32 28
-+#define R_68K_TLS_LDM16 29
-+#define R_68K_TLS_LDM8 30
-+#define R_68K_TLS_LDO32 31
-+#define R_68K_TLS_LDO16 32
-+#define R_68K_TLS_LDO8 33
-+#define R_68K_TLS_IE32 34
-+#define R_68K_TLS_IE16 35
-+#define R_68K_TLS_IE8 36
-+#define R_68K_TLS_LE32 37
-+#define R_68K_TLS_LE16 38
-+#define R_68K_TLS_LE8 39
-+/* TLS dynamic relocations */
-+#define R_68K_TLS_DTPMOD32 40
-+#define R_68K_TLS_DTPREL32 41
-+#define R_68K_TLS_TPREL32 42
-
- typedef unsigned long elf_greg_t;
-
-@@ -59,7 +86,7 @@ typedef struct user_m68kfp_struct elf_fp
- is actually used on ASV. */
- #define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
-
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- #define ELF_EXEC_PAGESIZE 4096
- #else
- #define ELF_EXEC_PAGESIZE 8192
-@@ -70,8 +97,10 @@ typedef struct user_m68kfp_struct elf_fp
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- #define ELF_ET_DYN_BASE 0xD0000000UL
-+#elif defined(CONFIG_COLDFIRE)
-+#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE + 0x10000000)
- #else
- #define ELF_ET_DYN_BASE 0x0D800000UL
- #endif
-@@ -115,4 +144,35 @@ typedef struct user_m68kfp_struct elf_fp
-
- #define SET_PERSONALITY(ex) set_personality(PER_LINUX)
-
-+/*
-+ * VDSO
-+ */
-+#ifdef CONFIG_VDSO
-+extern unsigned int vdso_enabled;
-+
-+#define VDSO_BASE ((unsigned long)current->mm->context.vdso)
-+#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x))
-+
-+#define VDSO_AUX_ENT \
-+ if (vdso_enabled) \
-+ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
-+
-+/* additional pages */
-+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
-+
-+struct linux_binprm;
-+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-+ int executable_stack);
-+
-+#else
-+/* no VDSO_AUX_ENT */
-+#define VDSO_AUX_ENT
-+#endif
-+
-+#define ARCH_DLINFO \
-+do { \
-+ /* vdso entry */ \
-+ VDSO_AUX_ENT; \
-+} while (0);
-+
- #endif
---- a/arch/m68k/include/asm/io_mm.h
-+++ b/arch/m68k/include/asm/io_mm.h
-@@ -1,23 +1,36 @@
- /*
- * linux/include/asm-m68k/io.h
- *
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ *
- * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other
- * IO access
- * - added Q40 support
- * - added skeleton for GG-II and Amiga PCMCIA
- * 2/3/01 RZ: - moved a few more defs into raw_io.h
- *
-- * inX/outX should not be used by any driver unless it does
-- * ISA access. Other drivers should use function defined in raw_io.h
-+ * inX/outX/readX/writeX should not be used by any driver unless it does
-+ * ISA or PCI access. Other drivers should use function defined in raw_io.h
- * or define its own macros on top of these.
- *
-- * inX(),outX() are for ISA I/O
-+ * inX(),outX() are for PCI and ISA I/O
-+ * readX(),writeX() are for PCI memory
- * isa_readX(),isa_writeX() are for ISA memory
-+ *
-+ * moved mem{cpy,set}_*io inside CONFIG_PCI
- */
-
- #ifndef _IO_H
- #define _IO_H
-
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cf_io.h>
-+#else
-+
- #ifdef __KERNEL__
-
- #include <linux/compiler.h>
-@@ -49,6 +62,27 @@
- #define MULTI_ISA 0
- #endif /* Q40 */
-
-+/* GG-II Zorro to ISA bridge */
-+#ifdef CONFIG_GG2
-+
-+extern unsigned long gg2_isa_base;
-+#define GG2_ISA_IO_B(ioaddr) \
-+ (gg2_isa_base + 1 + ((unsigned long)(ioaddr) * 4))
-+#define GG2_ISA_IO_W(ioaddr) \
-+ (gg2_isa_base + ((unsigned long)(ioaddr) * 4))
-+#define GG2_ISA_MEM_B(madr) \
-+ (gg2_isa_base + 1 + (((unsigned long)(madr) * 4) & 0xfffff))
-+#define GG2_ISA_MEM_W(madr) \
-+ (gg2_isa_base + (((unsigned long)(madr) * 4) & 0xfffff))
-+
-+#ifndef MULTI_ISA
-+#define MULTI_ISA 0
-+#else
-+#undef MULTI_ISA
-+#define MULTI_ISA 1
-+#endif
-+#endif /* GG2 */
-+
- #ifdef CONFIG_AMIGA_PCMCIA
- #include <asm/amigayle.h>
-
-@@ -71,17 +105,22 @@
- #undef MULTI_ISA
- #endif
-
--#define ISA_TYPE_Q40 (1)
--#define ISA_TYPE_AG (2)
-+#define Q40_ISA (1)
-+#define GG2_ISA (2)
-+#define AG_ISA (3)
-
- #if defined(CONFIG_Q40) && !defined(MULTI_ISA)
--#define ISA_TYPE ISA_TYPE_Q40
-+#define ISA_TYPE Q40_ISA
- #define ISA_SEX 0
- #endif
- #if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
--#define ISA_TYPE ISA_TYPE_AG
-+#define ISA_TYPE AG_ISA
- #define ISA_SEX 1
- #endif
-+#if defined(CONFIG_GG2) && !defined(MULTI_ISA)
-+#define ISA_TYPE GG2_ISA
-+#define ISA_SEX 0
-+#endif
-
- #ifdef MULTI_ISA
- extern int isa_type;
-@@ -98,65 +137,72 @@ extern int isa_sex;
-
- static inline u8 __iomem *isa_itb(unsigned long addr)
- {
-- switch(ISA_TYPE)
-- {
-+ switch (ISA_TYPE) {
- #ifdef CONFIG_Q40
-- case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
-+ case Q40_ISA: return (u8 __iomem *)Q40_ISA_IO_B(addr);
-+#endif
-+#ifdef CONFIG_GG2
-+ case GG2_ISA: return (u8 __iomem *)GG2_ISA_IO_B(addr);
- #endif
- #ifdef CONFIG_AMIGA_PCMCIA
-- case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
-+ case AG_ISA: return (u8 __iomem *)AG_ISA_IO_B(addr);
- #endif
-- default: return NULL; /* avoid warnings, just in case */
-- }
-+ default: return NULL; /* avoid warnings, just in case */
-+ }
- }
- static inline u16 __iomem *isa_itw(unsigned long addr)
- {
-- switch(ISA_TYPE)
-- {
-+ switch (ISA_TYPE) {
- #ifdef CONFIG_Q40
-- case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
-+ case Q40_ISA: return (u16 __iomem *)Q40_ISA_IO_W(addr);
-+#endif
-+#ifdef CONFIG_GG2
-+ case GG2_ISA: return (u16 __iomem *)GG2_ISA_IO_W(addr);
- #endif
- #ifdef CONFIG_AMIGA_PCMCIA
-- case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
-+ case AG_ISA: return (u16 __iomem *)AG_ISA_IO_W(addr);
- #endif
-- default: return NULL; /* avoid warnings, just in case */
-- }
-+ default: return NULL; /* avoid warnings, just in case */
-+ }
- }
- static inline u32 __iomem *isa_itl(unsigned long addr)
- {
-- switch(ISA_TYPE)
-- {
-+ switch (ISA_TYPE) {
- #ifdef CONFIG_AMIGA_PCMCIA
-- case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
-+ case AG_ISA: return (u32 __iomem *)AG_ISA_IO_W(addr);
- #endif
-- default: return 0; /* avoid warnings, just in case */
-- }
-+ default: return 0; /* avoid warnings, just in case */
-+ }
- }
- static inline u8 __iomem *isa_mtb(unsigned long addr)
- {
-- switch(ISA_TYPE)
-- {
-+ switch (ISA_TYPE) {
- #ifdef CONFIG_Q40
-- case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
-+ case Q40_ISA: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
-+#endif
-+#ifdef CONFIG_GG2
-+ case GG2_ISA: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
- #endif
- #ifdef CONFIG_AMIGA_PCMCIA
-- case ISA_TYPE_AG: return (u8 __iomem *)addr;
-+ case AG_ISA: return (u8 __iomem *)addr;
- #endif
-- default: return NULL; /* avoid warnings, just in case */
-- }
-+ default: return NULL; /* avoid warnings, just in case */
-+ }
- }
- static inline u16 __iomem *isa_mtw(unsigned long addr)
- {
-- switch(ISA_TYPE)
-- {
-+ switch (ISA_TYPE) {
- #ifdef CONFIG_Q40
-- case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
-+ case Q40_ISA: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
-+#endif
-+#ifdef CONFIG_GG2
-+ case GG2_ISA: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
- #endif
- #ifdef CONFIG_AMIGA_PCMCIA
-- case ISA_TYPE_AG: return (u16 __iomem *)addr;
-+ case AG_ISA: return (u16 __iomem *)addr;
- #endif
-- default: return NULL; /* avoid warnings, just in case */
-- }
-+ default: return NULL; /* avoid warnings, just in case */
-+ }
- }
-
-
-@@ -167,27 +213,30 @@ static inline u16 __iomem *isa_mtw(unsig
- #define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
- #define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val)))
-
--#define isa_readb(p) in_8(isa_mtb((unsigned long)(p)))
--#define isa_readw(p) \
-- (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \
-- : in_le16(isa_mtw((unsigned long)(p))))
--#define isa_writeb(val,p) out_8(isa_mtb((unsigned long)(p)),(val))
--#define isa_writew(val,p) \
-- (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \
-- : out_le16(isa_mtw((unsigned long)(p)),(val)))
--
-+#define isa_readb(p) in_8(isa_mtb(p))
-+#define isa_readw(p) (ISA_SEX ? in_be16(isa_mtw(p)) : in_le16(isa_mtw(p)))
-+#define isa_writeb(val, p) out_8(isa_mtb(p), (val))
-+#define isa_writew(val, p) \
-+ (ISA_SEX ? out_be16(isa_mtw(p), (val)) : out_le16(isa_mtw(p), (val)))
- static inline void isa_delay(void)
- {
-- switch(ISA_TYPE)
-- {
-+ switch (ISA_TYPE) {
- #ifdef CONFIG_Q40
-- case ISA_TYPE_Q40: isa_outb(0,0x80); break;
-+ case Q40_ISA:
-+ isa_outb(0, 0x80);
-+ break;
-+#endif
-+#ifdef CONFIG_GG2
-+ case GG2_ISA:
-+ break;
- #endif
- #ifdef CONFIG_AMIGA_PCMCIA
-- case ISA_TYPE_AG: break;
-+ case AG_ISA:
-+ break;
- #endif
-- default: break; /* avoid warnings */
-- }
-+ default:
-+ break; /* avoid warnings */
-+ }
- }
-
- #define isa_inb_p(p) ({u8 v=isa_inb(p);isa_delay();v;})
-@@ -216,7 +265,10 @@ static inline void isa_delay(void)
- (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) : \
- raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
-
-+#endif /* CONFIG_ISA */
-
-+
-+#if defined(CONFIG_ISA) && !defined(CONFIG_PCI)
- #define inb isa_inb
- #define inb_p isa_inb_p
- #define outb isa_outb
-@@ -239,9 +291,80 @@ static inline void isa_delay(void)
- #define readw isa_readw
- #define writeb isa_writeb
- #define writew isa_writew
-+#endif /* CONFIG_ISA */
-+
-+#if defined(CONFIG_PCI)
-+
-+#define readl(addr) in_le32(addr)
-+#define writel(val, addr) out_le32((addr), (val))
-+
-+/* those can be defined for both ISA and PCI - it won't work though */
-+#define readb(addr) in_8(addr)
-+#define readw(addr) in_le16(addr)
-+#define writeb(val, addr) out_8((addr), (val))
-+#define writew(val, addr) out_le16((addr), (val))
-+
-+#define readb_relaxed(addr) readb(addr)
-+#define readw_relaxed(addr) readw(addr)
-+#define readl_relaxed(addr) readl(addr)
-+
-+#ifndef CONFIG_ISA
-+#define inb(port) in_8(port)
-+#define outb(val, port) out_8((port), (val))
-+#define inw(port) in_le16(port)
-+#define outw(val, port) out_le16((port), (val))
-+#define inl(port) in_le32(port)
-+#define outl(val, port) out_le32((port), (val))
-+#define insb(port, buf, nr) \
-+ raw_insb((u8 *)(port), (u8 *)(buf), (nr))
-+#define outsb(port, buf, nr) \
-+ raw_outsb((u8 *)(port), (u8 *)(buf), (nr))
-+#define insw(port, buf, nr) \
-+ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr))
-+#define outsw(port, buf, nr) \
-+ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr))
-+#define insl(port, buf, nr) \
-+ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
-+#define outsl(port, buf, nr) \
-+ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
-+
-+#define __raw_readb readb
-+#define __raw_readw readw
-+#define __raw_readl readl
-+#define __raw_writeb writeb
-+#define __raw_writew writew
-+#define __raw_writel writel
-
--#else /* CONFIG_ISA */
-+#else
-+/*
-+ * kernel with both ISA and PCI compiled in, those have
-+ * conflicting defs for in/out. Simply consider port < 1024
-+ * ISA and everything else PCI. read,write not defined
-+ * in this case
-+ */
-+#define inb(port) ((port) < 1024 ? isa_inb(port) : in_8(port))
-+#define inb_p(port) ((port) < 1024 ? isa_inb_p(port) : in_8(port))
-+#define inw(port) ((port) < 1024 ? isa_inw(port) : in_le16(port))
-+#define inw_p(port) ((port) < 1024 ? isa_inw_p(port) : in_le16(port))
-+#define inl(port) ((port) < 1024 ? isa_inl(port) : in_le32(port))
-+#define inl_p(port) ((port) < 1024 ? isa_inl_p(port) : in_le32(port))
-+
-+#define outb(val, port) (((port) < 1024) ? isa_outb((val), (port))
-+ : out_8((port), (val)))
-+#define outb_p(val, port) (((port) < 1024) ? isa_outb_p((val), (port))
-+ : out_8((port), (val)))
-+#define outw(val, port) (((port) < 1024) ? isa_outw((val), (port))
-+ : out_le16((port), (val)))
-+#define outw_p(val, port) (((port) < 1024) ? isa_outw_p((val), (port))
-+ : out_le16((port), (val)))
-+#define outl(val, port) (((port) < 1024) ? isa_outl((val), (port))
-+ : out_le32((port), (val)))
-+#define outl_p(val, port) (((port) < 1024) ? isa_outl_p((val), (port))
-+ : out_le32((port), (val)))
-+#endif
-+#endif /* CONFIG_PCI */
-
-+#if !defined(CONFIG_ISA) && !defined(CONFIG_PCI)
- /*
- * We need to define dummy functions for GENERIC_IOMAP support.
- */
-@@ -272,11 +395,11 @@ static inline void isa_delay(void)
- #define writeb(val,addr) out_8((addr),(val))
- #define readw(addr) in_le16(addr)
- #define writew(val,addr) out_le16((addr),(val))
--
--#endif /* CONFIG_ISA */
--
-+#endif
-+#if !defined(CONFIG_PCI)
- #define readl(addr) in_le32(addr)
- #define writel(val,addr) out_le32((addr),(val))
-+#endif
-
- #define mmiowb()
-
-@@ -333,4 +456,5 @@ static inline void memcpy_toio(volatile
- */
- #define xlate_dev_kmem_ptr(p) p
-
-+#endif /* CONFIG_COLDFIRE */
- #endif /* _IO_H */
---- a/arch/m68k/include/asm/irq.h
-+++ b/arch/m68k/include/asm/irq.h
-@@ -1,14 +1,20 @@
--#ifndef _M68K_IRQ_H_
--#define _M68K_IRQ_H_
--
- /*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ *
- * This should be the same as the max(NUM_X_SOURCES) for all the
- * different m68k hosts compiled into the kernel.
- * Currently the Atari has 72 and the Amiga 24, but if both are
- * supported in the kernel it is better to make room for 72.
- */
-+#ifndef _M68K_IRQ_H_
-+#define _M68K_IRQ_H_
- #if defined(CONFIG_COLDFIRE)
--#define NR_IRQS 256
-+#define SYS_IRQS 256
-+#define NR_IRQS SYS_IRQS
- #elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
- #define NR_IRQS 200
- #elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
---- a/arch/m68k/include/asm/machdep.h
-+++ b/arch/m68k/include/asm/machdep.h
-@@ -1,6 +1,12 @@
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_MACHDEP_H
- #define _M68K_MACHDEP_H
--
- #include <linux/seq_file.h>
- #include <linux/interrupt.h>
-
-@@ -42,4 +48,11 @@ extern irqreturn_t arch_timer_interrupt(
- extern void config_BSP(char *command, int len);
- extern void do_IRQ(int irq, struct pt_regs *fp);
-
-+#ifdef CONFIG_COLDFIRE
-+extern void __init config_coldfire(void);
-+extern void __init mmu_context_init(void);
-+extern irq_handler_t mach_default_handler;
-+extern void (*mach_tick)(void);
-+#endif
-+
- #endif /* _M68K_MACHDEP_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcfdspi.h
-@@ -0,0 +1,59 @@
-+/*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ *
-+ * This file is based on mcfqspi.h
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.001 25 March 2008 Andrey Butok
-+ * Initial Release - developed on uClinux with 2.6.23 kernel.
-+ *
-+ */
-+
-+#ifndef MCFDSPI_H_
-+#define MCFDSPI_H_
-+
-+struct coldfire_dspi_chip {
-+ u8 mode;
-+ u8 bits_per_word;
-+ u16 void_write_data;
-+ /* Only used in master mode */
-+ u8 dbr; /* Double baud rate */
-+ u8 pbr; /* Baud rate prescaler */
-+ u8 br; /* Baud rate scaler */
-+ u8 pcssck; /* PCS to SCK delay prescaler */
-+ u8 pasc; /* After SCK delay prescaler */
-+ u8 pdt; /* Delay after transfer prescaler */
-+ u8 cssck; /* PCS to SCK delay scaler */
-+ u8 asc; /* After SCK delay scaler */
-+ u8 dt; /* Delay after transfer scaler */
-+};
-+
-+struct coldfire_spi_master {
-+ u16 bus_num;
-+ u16 num_chipselect;
-+ u8 irq_source;
-+ u32 irq_vector;
-+ u32 irq_mask;
-+ u8 irq_lp;
-+ u8 par_val;
-+ u16 par_val16;
-+ u32 *irq_list;
-+ void (*cs_control)(u8 cs, u8 command);
-+};
-+#endif /*MCFDSPI_H_*/
---- a/arch/m68k/include/asm/mcfsim.h
-+++ b/arch/m68k/include/asm/mcfsim.h
-@@ -5,6 +5,12 @@
- *
- * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
-
- /****************************************************************************/
-@@ -45,5 +51,120 @@
- #include <asm/m54xxsim.h>
- #endif
-
-+#if defined(CONFIG_COLDFIRE)
-+#include <asm/coldfire.h>
-+#endif
-+
-+#if defined(CONFIG_M5445X)
-+#include <asm/mcf5445x_intc.h>
-+#include <asm/mcf5445x_gpio.h>
-+#include <asm/mcf5445x_ccm.h>
-+#include <asm/mcf5445x_eport.h>
-+#include <asm/mcf5445x_fbcs.h>
-+#include <asm/mcf5445x_xbs.h>
-+#include <asm/mcf5445x_dtim.h>
-+#include <asm/mcf5445x_rtc.h>
-+#include <asm/mcf5445x_scm.h>
-+#elif defined(CONFIG_M547X_8X)
-+#include <asm/m5485sim.h>
-+#include <asm/m5485gpio.h>
-+#include <asm/m5485gpt.h>
-+#elif defined(CONFIG_M5441X)
-+#include <asm/mcf5441x_intc.h>
-+#include <asm/mcf5441x_gpio.h>
-+#include <asm/mcf5441x_ccm.h>
-+#include <asm/mcf5441x_eport.h>
-+#include <asm/mcf5441x_fbcs.h>
-+#include <asm/mcf5441x_xbs.h>
-+#include <asm/mcf5441x_dtim.h>
-+#include <asm/mcf5441x_rtc.h>
-+#include <asm/mcf5441x_scm.h>
-+#include <asm/mcf5441x_pm.h>
-+#include <asm/mcf5441x_flexcan.h>
-+#include <asm/mcf5441x_clock.h>
-+#endif
-+
-+/*
-+ * Define the base address of the SIM within the MBAR address space.
-+ */
-+#define MCFSIM_BASE 0x0 /* Base address of SIM */
-+
-+
-+/*
-+ * Bit definitions for the ICR family of registers.
-+ */
-+#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
-+#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
-+#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
-+#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
-+#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
-+#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
-+#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
-+#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
-+#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
-+
-+#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
-+#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
-+#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
-+#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
-+
-+/*
-+ * Bit definitions for the Interrupt Mask register (IMR).
-+ */
-+#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */
-+#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */
-+#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */
-+#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */
-+#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */
-+#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */
-+#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */
-+
-+#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */
-+#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */
-+#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */
-+#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */
-+#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */
-+#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */
-+
-+#if defined(CONFIG_M5206e)
-+#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */
-+#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */
-+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-+#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */
-+#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */
-+#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */
-+#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */
-+#endif
-+
-+/*
-+ * Mask for all of the SIM devices. Some parts have more or less
-+ * SIM devices. This is a catchall for the sandard set.
-+ */
-+#ifndef MCFSIM_IMR_MASKALL
-+#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */
-+#endif
-+
-+
-+/*
-+ * PIT interrupt settings, if not found in mXXXXsim.h file.
-+ */
-+#ifndef ICR_INTRCONF
-+#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */
-+#endif
-+#ifndef MCFPIT_IMR
-+#define MCFPIT_IMR MCFINTC_IMRH
-+#endif
-+#ifndef MCFPIT_IMR_IBIT
-+#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32))
-+#endif
-+
-+
-+#ifndef __ASSEMBLY__
-+/*
-+ * Definition for the interrupt auto-vectoring support.
-+ */
-+extern void mcf_autovector(unsigned int vec);
-+#endif /* __ASSEMBLY__ */
-+
- /****************************************************************************/
- #endif /* mcfsim_h */
---- a/arch/m68k/include/asm/mcfuart.h
-+++ b/arch/m68k/include/asm/mcfuart.h
-@@ -5,6 +5,11 @@
- *
- * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
-
- /****************************************************************************/
-@@ -12,6 +17,59 @@
- #define mcfuart_h
- /****************************************************************************/
-
-+#if defined(CONFIG_M5445X)
-+#include <asm/mcf5445x_intc.h>
-+#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
-+#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
-+#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
-+#define MCFINT_VECBASE 64
-+#define MCFINT_UART0 26
-+#define MCFINT_UART1 27
-+#elif defined(CONFIG_M547X_8X)
-+#define MCFUART_BASE1 0x8600 /* Base address of UART1 */
-+#define MCFUART_BASE2 0x8700 /* Base address of UART2 */
-+#define MCFUART_BASE3 0x8800 /* Base address of UART3 */
-+#define MCFUART_BASE4 0x8900 /* Base address of UART4 */
-+#define MCFINT_VECBASE 64
-+#define MCFINT_UART0 35
-+#define MCFINT_UART1 34
-+#define MCFINT_UART2 33
-+#define MCFINT_UART3 32
-+#elif defined(CONFIG_M5441X)
-+#define MCFUART_BASE0 0xfc060000 /* Base address of UART1 */
-+#define MCFUART_BASE1 0xfc064000 /* Base address of UART2 */
-+#define MCFUART_BASE2 0xfc068000 /* Base address of UART3 */
-+#define MCFUART_BASE3 0xfc06C000 /* Base address of UART4 */
-+#define MCFUART_BASE4 0xec060000
-+#define MCFUART_BASE5 0xec064000
-+#define MCFUART_BASE6 0xec068000
-+#define MCFUART_BASE7 0xec06C000
-+#define MCFUART_BASE8 0xec070000
-+#define MCFUART_BASE9 0xec074000
-+
-+#define MCFINT0_VECBASE 64
-+#define MCFINT1_VECBASE (64 + 64)
-+#define MCFINT_UART0 26
-+#define MCFINT_UART1 27
-+#define MCFINT_UART2 28
-+#define MCFINT_UART3 29
-+#define MCFINT_UART4 48
-+#define MCFINT_UART5 49
-+#define MCFINT_UART6 50
-+#define MCFINT_UART7 51
-+#define MCFINT_UART8 52
-+#define MCFINT_UART9 53
-+#endif
-+
-+#if defined(CONFIG_M5441X)
-+#define MAX_PORT_NUM 10
-+#elif defined(CONFIG_M547X_8X)
-+#define MAX_PORT_NUM 4
-+#else
-+#define MAX_PORT_NUM 3
-+#endif
-+
-+#ifndef __ASSEMBLY__
- #include <linux/serial_core.h>
- #include <linux/platform_device.h>
-
-@@ -21,6 +79,7 @@ struct mcf_platform_uart {
- unsigned int irq; /* Interrupt vector */
- unsigned int uartclk; /* UART clock rate */
- };
-+#endif
-
- /*
- * Define the ColdFire UART register set addresses.
-@@ -94,6 +153,11 @@ struct mcf_platform_uart {
- #define MCFUART_USR_RXFULL 0x02 /* Receiver full */
- #define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
-
-+#if defined(CONFIG_M547X_8X)
-+#define MCFUART_USR_TXREADY_BN 0x0a
-+#define MCFUART_USR_TXEMPTY_BN 0x0b
-+#endif
-+
- #define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
- MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
-
---- a/arch/m68k/include/asm/mmu.h
-+++ b/arch/m68k/include/asm/mmu.h
-@@ -1,9 +1,22 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef __MMU_H
- #define __MMU_H
--
- #ifdef CONFIG_MMU
-+#ifdef CONFIG_VDSO
-+typedef struct {
-+ unsigned long id;
-+ void *vdso;
-+} mm_context_t;
-+#else
- /* Default "unsigned long" context */
- typedef unsigned long mm_context_t;
-+#endif
- #else
- typedef struct {
- unsigned long end_brk;
---- a/arch/m68k/include/asm/mmu_context.h
-+++ b/arch/m68k/include/asm/mmu_context.h
-@@ -1,14 +1,21 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef __M68K_MMU_CONTEXT_H
- #define __M68K_MMU_CONTEXT_H
--
- #include <asm-generic/mm_hooks.h>
-+#include <asm-generic/pgtable.h>
-
- static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
- {
- }
-
- #ifdef CONFIG_MMU
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
-
- #include <asm/setup.h>
- #include <asm/page.h>
-@@ -103,7 +110,7 @@ static inline void activate_mm(struct mm
- switch_mm_0460(next_mm);
- }
-
--#else /* CONFIG_SUN3 */
-+#elif defined(CONFIG_SUN3)
- #include <asm/sun3mmu.h>
- #include <linux/sched.h>
-
-@@ -151,7 +158,178 @@ static inline void activate_mm(struct mm
- activate_context(next_mm);
- }
-
-+#else /* CONFIG_COLDFIRE */
-+
-+#include <asm/coldfire.h>
-+#include <asm/atomic.h>
-+#include <asm/bitops.h>
-+#include <asm/mmu.h>
-+
-+#define NO_CONTEXT 256
-+#define LAST_CONTEXT 255
-+#define FIRST_CONTEXT 1
-+
-+#ifdef CONFIG_VDSO
-+#define cpu_context(mm) ((mm)->context.id)
-+#else
-+#define cpu_context(mm) ((mm)->context)
-+#endif
-+
-+#ifdef CONFIG_VDSO
-+extern void set_context(unsigned long context, pgd_t *pgd);
-+#else
-+extern void set_context(mm_context_t context, pgd_t *pgd);
- #endif
-+extern unsigned long context_map[];
-+#ifdef CONFIG_VDSO
-+extern unsigned long next_mmu_context;
-+#else
-+extern mm_context_t next_mmu_context;
-+#endif
-+
-+extern atomic_t nr_free_contexts;
-+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-+extern void steal_context(void);
-+
-+static inline void get_mmu_context(struct mm_struct *mm)
-+{
-+#ifdef CONFIG_VDSO
-+ unsigned long ctx;
-+#else
-+ mm_context_t ctx;
-+#endif
-+
-+ if (cpu_context(mm) != NO_CONTEXT)
-+ return;
-+ while (atomic_dec_and_test_lt(&nr_free_contexts)) {
-+ atomic_inc(&nr_free_contexts);
-+ steal_context();
-+ }
-+ ctx = next_mmu_context;
-+ while (test_and_set_bit(ctx, context_map)) {
-+ ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
-+ if (ctx > LAST_CONTEXT)
-+ ctx = 0;
-+ }
-+ next_mmu_context = (ctx + 1) & LAST_CONTEXT;
-+ cpu_context(mm) = ctx;
-+ context_mm[ctx] = mm;
-+}
-+
-+/*
-+ * Set up the context for a new address space.
-+ */
-+#define init_new_context(tsk, mm) ((cpu_context(mm) = NO_CONTEXT), 0)
-+/* #define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0) */
-+
-+/*
-+ * We're finished using the context for an address space.
-+ */
-+static inline void destroy_context(struct mm_struct *mm)
-+{
-+ if (cpu_context(mm) != NO_CONTEXT) {
-+ clear_bit(cpu_context(mm), context_map);
-+ cpu_context(mm) = NO_CONTEXT;
-+ atomic_inc(&nr_free_contexts);
-+ }
-+}
-+
-+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-+ struct task_struct *tsk)
-+{
-+ get_mmu_context(tsk->mm);
-+ set_context(cpu_context(tsk->mm), next->pgd);
-+}
-+
-+/*
-+ * After we have set current->mm to a new value, this activates
-+ * the context for the new mm so we see the new mappings.
-+ */
-+static inline void activate_mm(struct mm_struct *active_mm,
-+ struct mm_struct *mm)
-+{
-+ get_mmu_context(mm);
-+ set_context(cpu_context(mm), mm->pgd);
-+}
-+
-+#define deactivate_mm(tsk, mm) do { } while (0)
-+
-+extern void mmu_context_init(void);
-+#if defined(CONFIG_M547X_8X)
-+#define prepare_arch_switch(next) load_ksp_mmu(next)
-+
-+static inline void load_ksp_mmu(struct task_struct *task)
-+{
-+ unsigned long flags;
-+ struct mm_struct *mm;
-+ int asid;
-+ pgd_t *pgd;
-+ pmd_t *pmd;
-+ pte_t *pte;
-+ unsigned long mmuar;
-+
-+ local_irq_save(flags);
-+ mmuar = task->thread.ksp;
-+
-+ /* Search for a valid TLB entry, if one is found, don't remap */
-+ *MMUAR = mmuar;
-+ *MMUOR = MMUOR_STLB | MMUOR_ADR;
-+ if ((*MMUSR) & MMUSR_HIT)
-+ goto end;
-+
-+ if (mmuar >= PAGE_OFFSET) {
-+ mm = &init_mm;
-+ } else {
-+ printk(KERN_INFO "load_ksp_mmu: non-kernel"
-+ " mm found: 0x%08x\n",
-+ (unsigned int) task->mm);
-+ mm = task->mm;
-+ }
-+
-+ if (!mm)
-+ goto bug;
-+
-+ pgd = pgd_offset(mm, mmuar);
-+ if (pgd_none(*pgd))
-+ goto bug;
-+
-+ pmd = pmd_offset(pgd, mmuar);
-+ if (pmd_none(*pmd))
-+ goto bug;
-+
-+ pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar)
-+ : pte_offset_map(pmd, mmuar);
-+ if (pte_none(*pte) || !pte_present(*pte))
-+ goto bug;
-+
-+ set_pte(pte, pte_mkyoung(*pte));
-+ asid = cpu_context(mm) & 0xff;
-+ if (!pte_dirty(*pte) && mmuar <= PAGE_OFFSET)
-+ set_pte(pte, pte_wrprotect(*pte));
-+
-+ *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
-+ | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
-+ >> CF_PAGE_MMUTR_SHIFT)
-+ | MMUTR_V;
-+
-+ *MMUDR = (pte_val(*pte) & PAGE_MASK)
-+ | ((pte->pte) & CF_PAGE_MMUDR_MASK)
-+ | MMUDR_SZ8K | MMUDR_X;
-+
-+ *MMUOR = MMUOR_ACC | MMUOR_UAA;
-+ asm ("nop");
-+
-+ goto end;
-+
-+bug:
-+ printk(KERN_ERR "ksp load failed: mm=0x%08x ksp=0x%08x\n",
-+ (unsigned int) mm, (unsigned int) mmuar);
-+end:
-+ local_irq_restore(flags);
-+}
-+#endif /* CONFIG_M547X_8X */
-+#endif /* CONFIG_COLDFIRE */
-+
- #else /* !CONFIG_MMU */
-
- static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
---- a/arch/m68k/include/asm/page.h
-+++ b/arch/m68k/include/asm/page.h
-@@ -1,12 +1,18 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_PAGE_H
- #define _M68K_PAGE_H
--
- #include <linux/const.h>
- #include <asm/setup.h>
- #include <asm/page_offset.h>
-
- /* PAGE_SHIFT determines the page size */
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- #define PAGE_SHIFT (12)
- #else
- #define PAGE_SHIFT (13)
---- a/arch/m68k/include/asm/page_mm.h
-+++ b/arch/m68k/include/asm/page_mm.h
-@@ -1,5 +1,17 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_PAGE_MM_H
- #define _M68K_PAGE_MM_H
-+#if PAGE_SHIFT < 13
-+#define THREAD_SIZE (8192)
-+#else
-+#define THREAD_SIZE PAGE_SIZE
-+#endif
-
- #ifndef __ASSEMBLY__
-
-@@ -70,6 +82,49 @@ extern unsigned long m68k_memoffset;
-
- #define WANT_PAGE_VIRTUAL
-
-+#if defined(CONFIG_COLDFIRE)
-+extern unsigned long cf_dma_base;
-+extern unsigned long cf_dma_end;
-+
-+static inline unsigned long ___pa(void *vaddr)
-+{
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+ return ((unsigned long)vaddr & 0x0fffffff) + CONFIG_SDRAM_BASE;
-+#else
-+ if ((unsigned long)vaddr >= CONFIG_DMA_BASE &&
-+ (unsigned long)vaddr < (CONFIG_DMA_BASE + CONFIG_DMA_SIZE)) {
-+ /* address is in carved out DMA range */
-+ return ((unsigned long)vaddr - CONFIG_DMA_BASE)
-+ + CONFIG_SDRAM_BASE;
-+ } else if ((unsigned long)vaddr >= PAGE_OFFSET &&
-+ (unsigned long)vaddr < (PAGE_OFFSET + CONFIG_SDRAM_SIZE)) {
-+ /* normal mapping */
-+ return ((unsigned long)vaddr - PAGE_OFFSET) + CONFIG_SDRAM_BASE;
-+ }
-+
-+ return (unsigned long)vaddr;
-+#endif
-+}
-+#define __pa(vaddr) ___pa((void *)(vaddr))
-+
-+static inline void *__va(unsigned long paddr)
-+{
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+ return (void *)((paddr & 0x0fffffff) + PAGE_OFFSET);
-+#else
-+ if (paddr >= cf_dma_base && paddr <= cf_dma_end) {
-+ /* mapped address for DMA */
-+ return (void *)((paddr - CONFIG_SDRAM_BASE) + CONFIG_DMA_BASE);
-+ } else if (paddr >= cf_dma_end &&
-+ paddr < (CONFIG_SDRAM_BASE + CONFIG_SDRAM_SIZE)) {
-+ /* normal mapping */
-+ return (void *)((paddr - CONFIG_SDRAM_BASE) + PAGE_OFFSET);
-+ }
-+ return (void *)paddr;
-+#endif
-+}
-+
-+#else
- static inline unsigned long ___pa(void *vaddr)
- {
- unsigned long paddr;
-@@ -91,6 +146,7 @@ static inline void *__va(unsigned long p
- : "0" (paddr), "i" (m68k_fixup_memoffset));
- return vaddr;
- }
-+#endif
-
- #else /* !CONFIG_SUN3 */
- /* This #define is a horrible hack to suppress lots of warnings. --m */
-@@ -176,4 +232,9 @@ static inline __attribute_const__ int __
- #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-+#ifdef CONFIG_VDSO
-+/* vDSO support */
-+#define __HAVE_ARCH_GATE_AREA
-+#endif
-+
- #endif /* _M68K_PAGE_MM_H */
---- a/arch/m68k/include/asm/page_offset.h
-+++ b/arch/m68k/include/asm/page_offset.h
-@@ -1,10 +1,21 @@
--/* This handles the memory map.. */
--
-+/*
-+ * Page and physical memory maps.
-+ *
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifdef CONFIG_MMU
--#ifndef CONFIG_SUN3
--#define PAGE_OFFSET_RAW 0x00000000
--#else
-+#if defined(CONFIG_SUN3)
- #define PAGE_OFFSET_RAW 0x0E000000
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X) \
-+ || defined(CONFIG_M5441X)
-+#define PHYS_OFFSET CONFIG_SDRAM_BASE
-+#define PAGE_OFFSET_RAW (PHYS_OFFSET)
-+#else
-+#define PAGE_OFFSET_RAW 0x00000000
- #endif
- #else
- #define PAGE_OFFSET_RAW CONFIG_RAMBASE
---- a/arch/m68k/include/asm/pgalloc.h
-+++ b/arch/m68k/include/asm/pgalloc.h
-@@ -1,14 +1,22 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef M68K_PGALLOC_H
- #define M68K_PGALLOC_H
--
- #include <linux/mm.h>
- #include <linux/highmem.h>
- #include <asm/setup.h>
-
- #ifdef CONFIG_MMU
- #include <asm/virtconvert.h>
--#ifdef CONFIG_SUN3
-+#if defined(CONFIG_SUN3)
- #include <asm/sun3_pgalloc.h>
-+#elif defined(CONFIG_COLDFIRE)
-+#include <asm/cf_pgalloc.h>
- #else
- #include <asm/motorola_pgalloc.h>
- #endif
---- a/arch/m68k/include/asm/pgtable_mm.h
-+++ b/arch/m68k/include/asm/pgtable_mm.h
-@@ -1,6 +1,12 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_PGTABLE_H
- #define _M68K_PGTABLE_H
--
- #include <asm-generic/4level-fixup.h>
-
- #include <asm/setup.h>
-@@ -40,6 +46,8 @@
- /* PGDIR_SHIFT determines what a third-level page table entry can map */
- #ifdef CONFIG_SUN3
- #define PGDIR_SHIFT 17
-+#elif defined(CONFIG_COLDFIRE)
-+#define PGDIR_SHIFT 22
- #else
- #define PGDIR_SHIFT 25
- #endif
-@@ -54,6 +62,10 @@
- #define PTRS_PER_PTE 16
- #define PTRS_PER_PMD 1
- #define PTRS_PER_PGD 2048
-+#elif defined(CONFIG_COLDFIRE)
-+#define PTRS_PER_PTE 512
-+#define PTRS_PER_PMD 1
-+#define PTRS_PER_PGD 1024
- #else
- #define PTRS_PER_PTE 1024
- #define PTRS_PER_PMD 8
-@@ -66,6 +78,18 @@
- #ifdef CONFIG_SUN3
- #define KMAP_START 0x0DC00000
- #define KMAP_END 0x0E000000
-+#elif defined(CONFIG_COLDFIRE)
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
-+#define VMALLOC_START 0xc0000000
-+#define VMALLOC_END 0xcfffffff
-+#define KMAP_START (VMALLOC_END + 1)
-+#define KMAP_END (0xe8000000 - 1)
-+#elif defined(CONFIG_M5441X)
-+#define VMALLOC_START 0xc0000000
-+#define VMALLOC_END 0xcfffffff
-+#define KMAP_START (VMALLOC_END + 1)
-+#define KMAP_END (0xd8000000 - 1)
-+#endif
- #else
- #define KMAP_START 0xd0000000
- #define KMAP_END 0xf0000000
-@@ -79,9 +103,11 @@
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-+#if !defined(CONFIG_COLDFIRE)
- #define VMALLOC_OFFSET (8*1024*1024)
- #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
- #define VMALLOC_END KMAP_START
-+#endif
- #else
- extern unsigned long m68k_vmalloc_end;
- #define VMALLOC_START 0x0f800000
-@@ -130,6 +156,8 @@ static inline void update_mmu_cache(stru
-
- #ifdef CONFIG_SUN3
- #include <asm/sun3_pgtable.h>
-+#elif defined(CONFIG_COLDFIRE)
-+#include <asm/cf_pgtable.h>
- #else
- #include <asm/motorola_pgtable.h>
- #endif
-@@ -143,6 +171,10 @@ static inline void update_mmu_cache(stru
- #else
- # define __SUN3_PAGE_NOCACHE 0
- #endif
-+
-+#ifdef CONFIG_COLDFIRE
-+# define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE))
-+#else /* CONFIG_COLDFIRE */
- #define pgprot_noncached(prot) \
- (MMU_IS_SUN3 \
- ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE)) \
-@@ -151,7 +183,7 @@ static inline void update_mmu_cache(stru
- : (MMU_IS_040 || MMU_IS_060) \
- ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \
- : (prot)))
--
-+#endif /* CONFIG_COLDFIRE */
- #include <asm-generic/pgtable.h>
- #endif /* !__ASSEMBLY__ */
-
---- a/arch/m68k/include/asm/processor.h
-+++ b/arch/m68k/include/asm/processor.h
-@@ -2,6 +2,11 @@
- * include/asm-m68k/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
-
- #ifndef __ASM_M68K_PROCESSOR_H
-@@ -23,6 +28,10 @@ static inline unsigned long rdusp(void)
- #ifdef CONFIG_COLDFIRE_SW_A7
- extern unsigned int sw_usp;
- return sw_usp;
-+#elif defined(CONFIG_COLDFIRE)
-+ unsigned long usp;
-+ __asm__ __volatile__("movel %/usp,%0" : "=a" (usp));
-+ return usp;
- #else
- register unsigned long usp __asm__("a0");
- /* move %usp,%a0 */
-@@ -36,6 +45,8 @@ static inline void wrusp(unsigned long u
- #ifdef CONFIG_COLDFIRE_SW_A7
- extern unsigned int sw_usp;
- sw_usp = usp;
-+#elif defined(CONFIG_COLDFIRE)
-+ __asm__ __volatile__("movel %0,%/usp" : : "a" (usp));
- #else
- register unsigned long a0 __asm__("a0") = usp;
- /* move %a0,%usp */
-@@ -48,11 +59,17 @@ static inline void wrusp(unsigned long u
- * so don't change it unless you know what you are doing.
- */
- #ifdef CONFIG_MMU
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- #define TASK_SIZE (0xF0000000UL)
-+#elif defined(CONFIG_COLDFIRE)
-+#define TASK_SIZE (0xC0000000UL)
-+#else /* CONFIG_SUN3 */
-+#ifdef __ASSEMBLY__
-+#define TASK_SIZE (0x0E000000)
- #else
- #define TASK_SIZE (0x0E000000UL)
- #endif
-+#endif
- #else
- #define TASK_SIZE (0xFFFFFFFFUL)
- #endif
-@@ -66,8 +83,10 @@ static inline void wrusp(unsigned long u
- * space during mmap's.
- */
- #ifdef CONFIG_MMU
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- #define TASK_UNMAPPED_BASE 0xC0000000UL
-+#elif defined(CONFIG_COLDFIRE)
-+#define TASK_UNMAPPED_BASE 0x60000000UL
- #else
- #define TASK_UNMAPPED_BASE 0x0A000000UL
- #endif
-@@ -80,7 +99,11 @@ struct thread_struct {
- unsigned long ksp; /* kernel stack pointer */
- unsigned long usp; /* user stack pointer */
- unsigned short sr; /* saved status register */
-+#ifndef CONFIG_COLDFIRE
- unsigned short fs; /* saved fs (sfc, dfc) */
-+#else
-+ mm_segment_t fs;
-+#endif
- unsigned long crp[2]; /* cpu root pointer */
- unsigned long esp0; /* points to SR of stack frame */
- unsigned long faddr; /* info about last fault */
-@@ -102,6 +125,7 @@ struct thread_struct {
- /*
- * Do necessary setup to start up a newly executed thread.
- */
-+#ifndef CONFIG_COLDFIRE
- static inline void start_thread(struct pt_regs * regs, unsigned long pc,
- unsigned long usp)
- {
-@@ -112,7 +136,24 @@ static inline void start_thread(struct p
- regs->sr &= ~0x2000;
- wrusp(usp);
- }
-+#else
-+/*
-+ * Do necessary setup to start up a newly executed thread.
-+ *
-+ * pass the data segment into user programs if it exists,
-+ * it can't hurt anything as far as I can tell
-+ */
-+#define start_thread(_regs, _pc, _usp) \
-+do { \
-+ set_fs(USER_DS); /* reads from user space */ \
-+ (_regs)->pc = (_pc); \
-+ if (current->mm) \
-+ (_regs)->d5 = current->mm->start_data; \
-+ (_regs)->sr &= ~0x2000; \
-+ wrusp(_usp); \
-+} while (0)
-
-+#endif
- #else
-
- /*
---- a/arch/m68k/include/asm/ptrace.h
-+++ b/arch/m68k/include/asm/ptrace.h
-@@ -1,3 +1,10 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_PTRACE_H
- #define _M68K_PTRACE_H
-
-@@ -27,27 +34,38 @@
- stack during a system call. */
-
- struct pt_regs {
-- long d1;
-- long d2;
-- long d3;
-- long d4;
-- long d5;
-- long a0;
-- long a1;
-- long a2;
-- long d0;
-- long orig_d0;
-- long stkadj;
-+ long d1;
-+ long d2;
-+ long d3;
-+ long d4;
-+ long d5;
-+ long a0;
-+ long a1;
-+ long a2;
-+ long d0;
-+ long orig_d0;
-+ long stkadj;
- #ifdef CONFIG_COLDFIRE
-+#if 0
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
- unsigned short sr;
- unsigned long pc;
-+#endif
-+/*FROM BSP*/
-+ unsigned long mmuar;
-+ unsigned long mmusr;
-+ unsigned format:4; /* frame format specifier */
-+ unsigned fs2:2;
-+ unsigned vector:8;
-+ unsigned fs1:2;
-+ unsigned short sr;
-+ unsigned long pc;
- #else
-- unsigned short sr;
-- unsigned long pc;
-- unsigned format : 4; /* frame format specifier */
-- unsigned vector : 12; /* vector offset */
-+ unsigned short sr;
-+ unsigned long pc;
-+ unsigned format:4; /* frame format specifier */
-+ unsigned vector:12; /* vector offset */
- #endif
- };
-
---- a/arch/m68k/include/asm/raw_io.h
-+++ b/arch/m68k/include/asm/raw_io.h
-@@ -3,11 +3,19 @@
- *
- * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace
- *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
--
- #ifndef _RAW_IO_H
- #define _RAW_IO_H
-
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cf_raw_io.h>
-+#else
-+
- #ifdef __KERNEL__
-
- #include <asm/types.h>
-@@ -60,6 +68,9 @@ extern void __iounmap(void *addr, unsign
- #define __raw_writew(val,addr) out_be16((addr),(val))
- #define __raw_writel(val,addr) out_be32((addr),(val))
-
-+#define swap_inw(port) in_le16((port))
-+#define swap_outw(val, port) out_le16((port), (val))
-+
- static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
- {
- unsigned int i;
-@@ -344,4 +355,6 @@ static inline void raw_outsw_swapw(volat
-
- #endif /* __KERNEL__ */
-
-+#endif /* CONFIG_COLDFIRE */
-+
- #endif /* _RAW_IO_H */
---- a/arch/m68k/include/asm/segment.h
-+++ b/arch/m68k/include/asm/segment.h
-@@ -1,3 +1,10 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_SEGMENT_H
- #define _M68K_SEGMENT_H
-
-@@ -29,6 +36,7 @@ typedef struct {
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-+#ifndef CONFIG_COLDFIRE
- static inline mm_segment_t get_fs(void)
- {
- #ifdef CONFIG_MMU
-@@ -56,6 +64,15 @@ static inline void set_fs(mm_segment_t v
- #endif
- }
-
-+#else /* CONFIG_COLDFIRE */
-+
-+#include <asm/current.h>
-+#define get_fs() (current->thread.fs)
-+#define set_fs(val) (current->thread.fs = (val))
-+#define get_ds() (KERNEL_DS)
-+
-+#endif /* CONFIG_COLDFIRE */
-+
- #define segment_eq(a,b) ((a).seg == (b).seg)
-
- #endif /* __ASSEMBLY__ */
---- a/arch/m68k/include/asm/setup.h
-+++ b/arch/m68k/include/asm/setup.h
-@@ -2,6 +2,7 @@
- ** asm/setup.h -- Definition of the Linux/m68k setup information
- **
- ** Copyright 1992 by Greg Harp
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- **
- ** This file is subject to the terms and conditions of the GNU General Public
- ** License. See the file COPYING in the main directory of this archive
-@@ -40,6 +41,7 @@
- #define MACH_HP300 9
- #define MACH_Q40 10
- #define MACH_SUN3X 11
-+#define MACH_CFMMU 12
-
- #define COMMAND_LINE_SIZE 256
-
-@@ -189,6 +191,14 @@ extern unsigned long m68k_machtype;
- # define MACH_TYPE (MACH_SUN3X)
- #endif
-
-+#if !defined(CONFIG_COLDFIRE)
-+# define MACH_IS_COLDFIRE (0)
-+#else
-+# define CONFIG_COLDFIRE_ONLY
-+# define MACH_IS_COLDFIRE (1)
-+# define MACH_TYPE (MACH_CFMMU)
-+#endif
-+
- #ifndef MACH_TYPE
- # define MACH_TYPE (m68k_machtype)
- #endif
-@@ -211,23 +221,31 @@ extern unsigned long m68k_machtype;
- #define CPUB_68030 1
- #define CPUB_68040 2
- #define CPUB_68060 3
-+#define CPUB_CFV4E 4
-
- #define CPU_68020 (1<<CPUB_68020)
- #define CPU_68030 (1<<CPUB_68030)
- #define CPU_68040 (1<<CPUB_68040)
- #define CPU_68060 (1<<CPUB_68060)
-+#define CPU_CFV4E (1<<CPUB_CFV4E)
-
- #define FPUB_68881 0
- #define FPUB_68882 1
- #define FPUB_68040 2 /* Internal FPU */
- #define FPUB_68060 3 /* Internal FPU */
- #define FPUB_SUNFPA 4 /* Sun-3 FPA */
-+#define FPUB_CFV4E 5
-
- #define FPU_68881 (1<<FPUB_68881)
- #define FPU_68882 (1<<FPUB_68882)
- #define FPU_68040 (1<<FPUB_68040)
- #define FPU_68060 (1<<FPUB_68060)
- #define FPU_SUNFPA (1<<FPUB_SUNFPA)
-+#ifdef CONFIG_M547X_8X
-+#define FPU_CFV4E (1<<FPUB_CFV4E)
-+#else
-+#define FPU_CFV4E 0
-+#endif
-
- #define MMUB_68851 0
- #define MMUB_68030 1 /* Internal MMU */
-@@ -235,6 +253,7 @@ extern unsigned long m68k_machtype;
- #define MMUB_68060 3 /* Internal MMU */
- #define MMUB_APOLLO 4 /* Custom Apollo */
- #define MMUB_SUN3 5 /* Custom Sun-3 */
-+#define MMUB_CFV4E 6
-
- #define MMU_68851 (1<<MMUB_68851)
- #define MMU_68030 (1<<MMUB_68030)
-@@ -242,6 +261,7 @@ extern unsigned long m68k_machtype;
- #define MMU_68060 (1<<MMUB_68060)
- #define MMU_SUN3 (1<<MMUB_SUN3)
- #define MMU_APOLLO (1<<MMUB_APOLLO)
-+#define MMU_CFV4E (1<<MMUB_CFV4E)
-
- #ifdef __KERNEL__
-
-@@ -341,6 +361,14 @@ extern int m68k_is040or060;
- # endif
- #endif
-
-+#if !defined(CONFIG_CFV4E)
-+# define CPU_IS_COLDFIRE (0)
-+#else
-+# define CPU_IS_COLDFIRE (m68k_cputype & CPU_CFV4E)
-+# define CPU_IS_CFV4E (m68k_cputype & CPU_CFV4E)
-+# define MMU_IS_CFV4E (m68k_mmutype & MMU_CFV4E)
-+#endif
-+
- #define CPU_TYPE (m68k_cputype)
-
- #ifdef CONFIG_M68KFPU_EMU
-@@ -371,6 +399,14 @@ extern int m68k_realnum_memory; /* real
- extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
- #endif
-
-+#ifdef CONFIG_CFV4E
-+#define QCHIP_RESTORE_DIRECTIVE ".chip 547x"
-+#define CHIP_RESTORE_DIRECTIVE .chip 547x
-+#else
-+#define QCHIP_RESTORE_DIRECTIVE ".chip 68k"
-+#define CHIP_RESTORE_DIRECTIVE .chip 68k
-+#endif
-+
- #endif /* __KERNEL__ */
-
- #endif /* _M68K_SETUP_H */
---- a/arch/m68k/include/asm/signal.h
-+++ b/arch/m68k/include/asm/signal.h
-@@ -1,6 +1,12 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_SIGNAL_H
- #define _M68K_SIGNAL_H
--
- #include <linux/types.h>
-
- /* Avoid too many header ordering problems. */
-@@ -150,7 +156,7 @@ typedef struct sigaltstack {
- #ifdef __KERNEL__
- #include <asm/sigcontext.h>
-
--#ifndef __uClinux__
-+#ifndef CONFIG_COLDFIRE /*FIXME Jason*/
- #define __HAVE_ARCH_SIG_BITOPS
-
- static inline void sigaddset(sigset_t *set, int _sig)
---- a/arch/m68k/include/asm/string.h
-+++ b/arch/m68k/include/asm/string.h
-@@ -1,6 +1,12 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_STRING_H_
- #define _M68K_STRING_H_
--
- #include <linux/types.h>
- #include <linux/compiler.h>
-
-@@ -81,6 +87,18 @@ static inline char *strncpy(char *dest,
- strcpy(__d + strlen(__d), (s)); \
- })
-
-+#define __HAVE_ARCH_STRCHR
-+static inline char *strchr(const char *s, int c)
-+{
-+ char sc, ch = c;
-+
-+ for (; (sc = *s++) != ch; ) {
-+ if (!sc)
-+ return NULL;
-+ }
-+ return (char *)s - 1;
-+}
-+
- #ifndef CONFIG_COLDFIRE
- #define __HAVE_ARCH_STRCMP
- static inline int strcmp(const char *cs, const char *ct)
---- a/arch/m68k/include/asm/swab.h
-+++ b/arch/m68k/include/asm/swab.h
-@@ -1,11 +1,18 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_SWAB_H
- #define _M68K_SWAB_H
--
- #include <linux/types.h>
- #include <linux/compiler.h>
-
- #define __SWAB_64_THRU_32__
-
-+#if defined(__GNUC__)
- #if defined (__mcfisaaplus__) || defined (__mcfisac__)
- static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
- {
-@@ -23,5 +30,11 @@ static inline __attribute_const__ __u32
- }
- #define __arch_swab32 __arch_swab32
- #endif
-+#endif
-+
-+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-+# define __BYTEORDER_HAS_U64__
-+# define __SWAB_64_THRU_32__
-+#endif
-
- #endif /* _M68K_SWAB_H */
---- a/arch/m68k/include/asm/system_mm.h
-+++ b/arch/m68k/include/asm/system_mm.h
-@@ -1,14 +1,35 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_SYSTEM_H
- #define _M68K_SYSTEM_H
--
- #include <linux/linkage.h>
- #include <linux/kernel.h>
- #include <linux/irqflags.h>
- #include <asm/segment.h>
- #include <asm/entry.h>
-+#include <asm/cfcache.h>
-
- #ifdef __KERNEL__
-
-+#ifdef CONFIG_COLDFIRE
-+#define FLUSH_BC (0x00040000)
-+
-+#define finish_arch_switch(prev) do { \
-+ unsigned long tmpreg; \
-+ asm volatile ("move.l %2,%0\n" \
-+ "orl %1,%0\n" \
-+ "movec %0,%%cacr" \
-+ : "=&d" (tmpreg) \
-+ : "id" (FLUSH_BC), "m" (shadow_cacr)); \
-+ } while (0)
-+
-+#endif
-+
- /*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing. This
---- a/arch/m68k/include/asm/tlbflush.h
-+++ b/arch/m68k/include/asm/tlbflush.h
-@@ -1,8 +1,14 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _M68K_TLBFLUSH_H
- #define _M68K_TLBFLUSH_H
--
- #ifdef CONFIG_MMU
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
-
- #include <asm/current.h>
-
-@@ -92,7 +98,12 @@ static inline void flush_tlb_kernel_rang
- flush_tlb_all();
- }
-
--#else
-+static inline void flush_tlb_pgtables(struct mm_struct *mm,
-+ unsigned long start, unsigned long end)
-+{
-+}
-+
-+#elif defined(CONFIG_SUN3)
-
-
- /* Reserved PMEGs. */
-@@ -214,6 +225,13 @@ static inline void flush_tlb_kernel_page
- sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG);
- }
-
-+static inline void flush_tlb_pgtables(struct mm_struct *mm,
-+ unsigned long start, unsigned long end)
-+{
-+}
-+
-+#else /* CONFIG_COLDFIRE */
-+#include <asm/cf_tlbflush.h>
- #endif
-
- #else /* !CONFIG_MMU */
---- a/arch/m68k/include/asm/uaccess_mm.h
-+++ b/arch/m68k/include/asm/uaccess_mm.h
-@@ -1,6 +1,15 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef __M68K_UACCESS_H
- #define __M68K_UACCESS_H
--
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cf_uaccess.h>
-+#else
- /*
- * User space memory access functions
- */
-@@ -219,6 +228,41 @@ unsigned long __generic_copy_to_user(voi
- : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \
- : : "memory")
-
-+#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \
-+ asm volatile ("\n" \
-+ " move."#s1" (%2)+,%3\n" \
-+ "11: moves."#s1" %3,(%1)+\n" \
-+ "12: move."#s2" (%2)+,%3\n" \
-+ "21: moves."#s2" %3,(%1)+\n" \
-+ "22:\n" \
-+ " .ifnc \""#s3"\",\"\"\n" \
-+ " move."#s3" (%2)+,%3\n" \
-+ "31: moves."#s3" %3,(%1)+\n" \
-+ "32:\n" \
-+ " .endif\n" \
-+ "4:\n" \
-+ "\n" \
-+ " .section __ex_table,\"a\"\n" \
-+ " .align 4\n" \
-+ " .long 11b,5f\n" \
-+ " .long 12b,5f\n" \
-+ " .long 21b,5f\n" \
-+ " .long 22b,5f\n" \
-+ " .ifnc \""#s3"\",\"\"\n" \
-+ " .long 31b,5f\n" \
-+ " .long 32b,5f\n" \
-+ " .endif\n" \
-+ " .previous\n" \
-+ "\n" \
-+ " .section .fixup,\"ax\"\n" \
-+ " .even\n" \
-+ "5: moveq.l #"#n",%0\n" \
-+ " jra 4b\n" \
-+ " .previous\n" \
-+ : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \
-+ : : "memory")
-+
-+#endif /* CONFIG_COLDFIRE */
- static __always_inline unsigned long
- __constant_copy_from_user(void *to, const void __user *from, unsigned long n)
- {
-@@ -266,40 +310,6 @@ __constant_copy_from_user(void *to, cons
- return res;
- }
-
--#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \
-- asm volatile ("\n" \
-- " move."#s1" (%2)+,%3\n" \
-- "11: moves."#s1" %3,(%1)+\n" \
-- "12: move."#s2" (%2)+,%3\n" \
-- "21: moves."#s2" %3,(%1)+\n" \
-- "22:\n" \
-- " .ifnc \""#s3"\",\"\"\n" \
-- " move."#s3" (%2)+,%3\n" \
-- "31: moves."#s3" %3,(%1)+\n" \
-- "32:\n" \
-- " .endif\n" \
-- "4:\n" \
-- "\n" \
-- " .section __ex_table,\"a\"\n" \
-- " .align 4\n" \
-- " .long 11b,5f\n" \
-- " .long 12b,5f\n" \
-- " .long 21b,5f\n" \
-- " .long 22b,5f\n" \
-- " .ifnc \""#s3"\",\"\"\n" \
-- " .long 31b,5f\n" \
-- " .long 32b,5f\n" \
-- " .endif\n" \
-- " .previous\n" \
-- "\n" \
-- " .section .fixup,\"ax\"\n" \
-- " .even\n" \
-- "5: moveq.l #"#n",%0\n" \
-- " jra 4b\n" \
-- " .previous\n" \
-- : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \
-- : : "memory")
--
- static __always_inline unsigned long
- __constant_copy_to_user(void __user *to, const void *from, unsigned long n)
- {
---- a/arch/m68k/include/asm/unistd.h
-+++ b/arch/m68k/include/asm/unistd.h
-@@ -1,6 +1,12 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef _ASM_M68K_UNISTD_H_
- #define _ASM_M68K_UNISTD_H_
--
- /*
- * This file contains the system call numbers.
- */
-@@ -343,10 +349,11 @@
- #define __NR_fanotify_init 337
- #define __NR_fanotify_mark 338
- #define __NR_prlimit64 339
-+#define __NR_recvmmsg 340
-
- #ifdef __KERNEL__
-
--#define NR_syscalls 340
-+#define NR_syscalls 341
-
- #define __ARCH_WANT_IPC_PARSE_VERSION
- #define __ARCH_WANT_OLD_READDIR
---- a/arch/m68k/include/asm/virtconvert.h
-+++ b/arch/m68k/include/asm/virtconvert.h
-@@ -1,5 +1,15 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- #ifndef __VIRT_CONVERT__
- #define __VIRT_CONVERT__
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cf_virtconvert.h>
-+#else
-
- /*
- * Macros used for converting between virtual and physical mappings.
-@@ -45,3 +55,4 @@ static inline void *phys_to_virt(unsigne
-
- #endif
- #endif
-+#endif
---- a/arch/m68k/kernel/Makefile
-+++ b/arch/m68k/kernel/Makefile
-@@ -2,16 +2,27 @@
- # Makefile for the linux kernel.
- #
-
--ifndef CONFIG_SUN3
-- extra-y := head.o
-+ifdef CONFIG_SUN3
-+ extra-y := sun3-head.o vmlinux.lds
-+ obj-y := entry.o signal.o ints.o time.o
- else
-- extra-y := sun3-head.o
-+ifndef CONFIG_COLDFIRE
-+ extra-y := head.o vmlinux.lds
-+ obj-y := entry.o signal.o traps.o ints.o time.o
-+else # CONFIG_COLDFIRE
-+ extra-y := vmlinux.lds
-+ obj-y := time.o
-+ ifdef CONFIG_M547X_8X
-+ obj-$(CONFIG_PCI) += bios32_mcf548x.o
-+ endif
-+endif
- endif
--extra-y += vmlinux.lds
-
--obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
-- sys_m68k.o time.o setup.o m68k_ksyms.o devres.o
-+obj-y += process.o ptrace.o module.o \
-+ sys_m68k.o setup.o m68k_ksyms.o devres.o# semaphore.o
-
- devres-y = ../../../kernel/irq/devres.o
-
- obj-y$(CONFIG_MMU_SUN3) += dma.o # no, it's not a typo
-+
-+EXTRA_AFLAGS := -traditional
---- a/arch/m68k/kernel/asm-offsets.c
-+++ b/arch/m68k/kernel/asm-offsets.c
-@@ -2,6 +2,15 @@
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ * Add Codlfire support
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
-@@ -22,6 +31,9 @@
- int main(void)
- {
- /* offsets into the task struct */
-+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
-+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
-+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
- DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
- DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
- DEFINE(TASK_MM, offsetof(struct task_struct, mm));
-@@ -43,6 +55,7 @@ int main(void)
- /* offsets into the thread_info struct */
- DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count));
- DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags));
-+ DEFINE(TINFO_TP_VALUE, offsetof(struct thread_info, tp_value));
-
- /* offsets into the pt_regs */
- DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
-@@ -57,8 +70,23 @@ int main(void)
- DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
- DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
- DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
-+#ifdef CONFIG_COLDFIRE
-+ /* Need to get the context out of struct mm for ASID setting */
-+ DEFINE(MM_CONTEXT, offsetof(struct mm_struct, context));
-+ /* Coldfire exception frame has vector *before* pc */
-+ DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) - 4);
-+#else
- /* bitfields are a bit difficult */
- DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
-+#endif
-+
-+ /* offsets into the irq_handler struct */
-+ DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
-+ DEFINE(IRQ_DEVID, offsetof(struct irq_node, dev_id));
-+ DEFINE(IRQ_NEXT, offsetof(struct irq_node, next));
-+
-+ /* offsets into the kernel_stat struct */
-+ DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
- /* offsets into the irq_cpustat_t struct */
- DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
---- a/arch/m68k/kernel/dma.c
-+++ b/arch/m68k/kernel/dma.c
-@@ -1,4 +1,7 @@
- /*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
-@@ -12,12 +15,25 @@
- #include <linux/scatterlist.h>
- #include <linux/slab.h>
- #include <linux/vmalloc.h>
--
-+#include <linux/pci.h>
- #include <asm/pgalloc.h>
-
- void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *handle, gfp_t flag)
- {
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X) || \
-+ defined(CONFIG_M5441X)
-+ /*
-+ * On the M5445x platform the memory allocated with GFP_DMA
-+ * is guaranteed to be DMA'able.
-+ */
-+ void *addr;
-+
-+ size = PAGE_ALIGN(size);
-+ addr = kmalloc(size, GFP_DMA);
-+ *handle = virt_to_phys(addr);
-+ return addr;
-+#else
- struct page *page, **map;
- pgprot_t pgprot;
- void *addr;
-@@ -56,6 +72,7 @@ void *dma_alloc_coherent(struct device *
- kfree(map);
-
- return addr;
-+#endif
- }
- EXPORT_SYMBOL(dma_alloc_coherent);
-
-@@ -63,7 +80,12 @@ void dma_free_coherent(struct device *de
- void *addr, dma_addr_t handle)
- {
- pr_debug("dma_free_coherent: %p, %x\n", addr, handle);
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X) || \
-+ defined(CONFIG_M5441X)
-+ kfree((void *)handle);
-+#else
- vfree(addr);
-+#endif
- }
- EXPORT_SYMBOL(dma_free_coherent);
-
-@@ -77,6 +99,9 @@ void dma_sync_single_for_device(struct d
- case DMA_FROM_DEVICE:
- cache_clear(handle, size);
- break;
-+ case PCI_DMA_BIDIRECTIONAL:
-+ flush_dcache();
-+ break;
- default:
- if (printk_ratelimit())
- printk("dma_sync_single_for_device: unsupported dir %u\n", dir);
-@@ -89,16 +114,23 @@ void dma_sync_sg_for_device(struct devic
- enum dma_data_direction dir)
- {
- int i;
-+#ifdef CONFIG_COLDFIRE
-+ struct scatterlist *_sg;
-
-+ for_each_sg(sg, _sg, nents, i)
-+ dma_sync_single_for_device(dev, _sg->dma_address,
-+ _sg->length, dir);
-+#else
- for (i = 0; i < nents; sg++, i++)
- dma_sync_single_for_device(dev, sg->dma_address, sg->length, dir);
-+#endif
- }
- EXPORT_SYMBOL(dma_sync_sg_for_device);
-
- dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
- enum dma_data_direction dir)
- {
-- dma_addr_t handle = virt_to_bus(addr);
-+ dma_addr_t handle = (dma_addr_t)virt_to_bus(addr);
-
- dma_sync_single_for_device(dev, handle, size, dir);
- return handle;
-@@ -120,10 +152,19 @@ int dma_map_sg(struct device *dev, struc
- enum dma_data_direction dir)
- {
- int i;
--
-+#ifdef CONFIG_COLDFIRE
-+ struct scatterlist *_sg;
-+#endif
-+#ifndef CONFIG_COLDFIRE
- for (i = 0; i < nents; sg++, i++) {
- sg->dma_address = sg_phys(sg);
- dma_sync_single_for_device(dev, sg->dma_address, sg->length, dir);
-+#else
-+ for_each_sg(sg, _sg, nents, i) {
-+ _sg->dma_address = sg_phys(_sg);
-+ dma_sync_single_for_device(dev, _sg->dma_address,
-+ _sg->length, dir);
-+#endif
- }
- return nents;
- }
---- a/arch/m68k/kernel/process.c
-+++ b/arch/m68k/kernel/process.c
-@@ -4,6 +4,15 @@
- * Copyright (C) 1995 Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt.Mahan@freescale.com
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
-
- /*
-@@ -185,12 +194,21 @@ EXPORT_SYMBOL(kernel_thread);
- void flush_thread(void)
- {
- unsigned long zero = 0;
-+#if !defined(CONFIG_COLDFIRE)
- set_fs(USER_DS);
- current->thread.fs = __USER_DS;
- if (!FPU_IS_EMU)
- asm volatile (".chip 68k/68881\n\t"
- "frestore %0@\n\t"
- ".chip 68k" : : "a" (&zero));
-+#else
-+ set_fs(USER_DS);
-+ current->thread.fs = USER_DS;
-+#if defined(CONFIG_FPU)
-+ if (!FPU_IS_EMU)
-+ asm volatile ("frestore %0@\n\t" : : "a" (&zero));
-+#endif
-+#endif
- }
-
- /*
-@@ -258,6 +276,7 @@ int copy_thread(unsigned long clone_flag
- * Must save the current SFC/DFC value, NOT the value when
- * the parent was last descheduled - RGH 10-08-96
- */
-+#if !defined(CONFIG_COLDFIRE)
- p->thread.fs = get_fs().seg;
-
- if (!FPU_IS_EMU) {
-@@ -269,9 +288,34 @@ int copy_thread(unsigned long clone_flag
- "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
- : : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
- : "memory");
-+#else
-+ p->thread.fs = get_fs();
-+
-+#if defined(CONFIG_FPU)
-+ if (!FPU_IS_EMU) {
-+ /* Copy the current fpu state */
-+ asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0])
-+ : "memory");
-+
-+ if (p->thread.fpstate[0]) {
-+ asm volatile ("fmovemd %/fp0-%/fp7,%0"
-+ : : "m" (p->thread.fp[0])
-+ : "memory");
-+ asm volatile ("fmovel %/fpiar,%0"
-+ : : "m" (p->thread.fpcntl[0])
-+ : "memory");
-+ asm volatile ("fmovel %/fpcr,%0"
-+ : : "m" (p->thread.fpcntl[1])
-+ : "memory");
-+ asm volatile ("fmovel %/fpsr,%0"
-+ : : "m" (p->thread.fpcntl[2])
-+ : "memory");
-+ }
- /* Restore the state in case the fpu was busy */
- asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
- }
-+#endif
-+#endif
-
- return 0;
- }
-@@ -280,7 +324,9 @@ int copy_thread(unsigned long clone_flag
-
- int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
- {
-+#if !defined(CONFIG_COLDFIRE) || defined(CONFIG_FPU)
- char fpustate[216];
-+#endif
-
- if (FPU_IS_EMU) {
- int i;
-@@ -297,6 +343,7 @@ int dump_fpu (struct pt_regs *regs, stru
- }
-
- /* First dump the fpu context to avoid protocol violation. */
-+#if !defined(CONFIG_COLDFIRE)
- asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
- if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
- return 0;
-@@ -307,6 +354,25 @@ int dump_fpu (struct pt_regs *regs, stru
- asm volatile ("fmovemx %/fp0-%/fp7,%0"
- :: "m" (fpu->fpregs[0])
- : "memory");
-+#elif defined(CONFIG_FPU)
-+ asm volatile ("fsave %0" : : "m" (fpustate[0]) : "memory");
-+ if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
-+ return 0;
-+
-+ asm volatile ("fmovel %/fpiar,%0"
-+ : : "m" (fpu->fpcntl[0])
-+ : "memory");
-+ asm volatile ("fmovel %/fpcr,%0"
-+ : : "m" (fpu->fpcntl[1])
-+ : "memory");
-+ asm volatile ("fmovel %/fpsr,%0"
-+ : : "m" (fpu->fpcntl[2])
-+ : "memory");
-+ asm volatile ("fmovemd %/fp0-%/fp7,%0"
-+ : : "m" (fpu->fpregs[0])
-+ : "memory");
-+#endif
-+
- return 1;
- }
- EXPORT_SYMBOL(dump_fpu);
---- a/arch/m68k/kernel/setup.c
-+++ b/arch/m68k/kernel/setup.c
-@@ -2,7 +2,14 @@
- * linux/arch/m68k/kernel/setup.c
- *
- * Copyright (C) 1995 Hamish Macdonald
-- */
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+*/
-
- /*
- * This file handles the architecture-dependent parts of system setup
-@@ -74,14 +81,26 @@ struct mem_info m68k_memory[NUM_MEMINFO]
- EXPORT_SYMBOL(m68k_memory);
-
- struct mem_info m68k_ramdisk;
-+EXPORT_SYMBOL(m68k_ramdisk);
-
-+#if !defined(CONFIG_COLDFIRE)
- static char m68k_command_line[CL_SIZE];
-+#else
-+char m68k_command_line[CL_SIZE];
-+unsigned long uboot_info_stk;
-+EXPORT_SYMBOL(uboot_info_stk);
-+#endif
-
- void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
- /* machine dependent irq functions */
- void (*mach_init_IRQ) (void) __initdata = NULL;
- void (*mach_get_model) (char *model);
- void (*mach_get_hardware_list) (struct seq_file *m);
-+
-+#ifdef CONFIG_COLDFIRE
-+void (*mach_tick)(void);
-+#endif
-+
- /* machine dependent timer functions */
- unsigned long (*mach_gettimeoffset) (void);
- int (*mach_hwclk) (int, struct rtc_time*);
-@@ -137,13 +156,17 @@ extern void config_hp300(void);
- extern void config_q40(void);
- extern void config_sun3x(void);
-
-+#ifdef CONFIG_COLDFIRE
-+void coldfire_sort_memrec(void);
-+#endif
-+
- #define MASK_256K 0xfffc0000
-
- extern void paging_init(void);
-
- static void __init m68k_parse_bootinfo(const struct bi_record *record)
- {
-- while (record->tag != BI_LAST) {
-+ while ((record->tag != BI_LAST) && !(CONFIG_COLDFIRE)) {
- int unknown = 0;
- const unsigned long *data = record->data;
-
-@@ -203,6 +226,10 @@ static void __init m68k_parse_bootinfo(c
- record->size);
- }
-
-+#ifdef CONFIG_COLDFIRE
-+ coldfire_sort_memrec();
-+#endif
-+
- m68k_realnum_memory = m68k_num_memory;
- #ifdef CONFIG_SINGLE_MEMORY_CHUNK
- if (m68k_num_memory > 1) {
-@@ -215,7 +242,9 @@ static void __init m68k_parse_bootinfo(c
-
- void __init setup_arch(char **cmdline_p)
- {
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- int i;
-+#endif
-
- /* The bootinfo is located right after the kernel bss */
- m68k_parse_bootinfo((const struct bi_record *)_end);
-@@ -230,9 +259,10 @@ void __init setup_arch(char **cmdline_p)
- * We should really do our own FPU check at startup.
- * [what do we do with buggy 68LC040s? if we have problems
- * with them, we should add a test to check_bugs() below] */
--#ifndef CONFIG_M68KFPU_EMU_ONLY
-+#if !defined(CONFIG_M68KFPU_EMU_ONLY) && defined(CONFIG_FPU)
- /* clear the fpu if we have one */
-- if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
-+ if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|
-+ FPU_CFV4E)) {
- volatile int zero = 0;
- asm volatile ("frestore %0" : : "m" (zero));
- }
-@@ -320,16 +350,17 @@ void __init setup_arch(char **cmdline_p)
- config_sun3x();
- break;
- #endif
-+#ifdef CONFIG_COLDFIRE
-+ case MACH_CFMMU:
-+ config_coldfire();
-+ break;
-+#endif
- default:
- panic("No configuration setup");
- }
-
- paging_init();
-
--#ifndef CONFIG_SUN3
-- for (i = 1; i < m68k_num_memory; i++)
-- free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
-- m68k_memory[i].size);
- #ifdef CONFIG_BLK_DEV_INITRD
- if (m68k_ramdisk.size) {
- reserve_bootmem_node(__virt_to_node(phys_to_virt(m68k_ramdisk.addr)),
-@@ -341,6 +372,10 @@ void __init setup_arch(char **cmdline_p)
- }
- #endif
-
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
-+ for (i = 1; i < m68k_num_memory; i++)
-+ free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
-+ m68k_memory[i].size);
- #ifdef CONFIG_ATARI
- if (MACH_IS_ATARI)
- atari_stram_reserve_pages((void *)availmem);
-@@ -353,12 +388,22 @@ void __init setup_arch(char **cmdline_p)
-
- #endif /* !CONFIG_SUN3 */
-
-+#ifdef CONFIG_COLDFIRE
-+ mmu_context_init();
-+#endif
-+
- /* set ISA defs early as possible */
- #if defined(CONFIG_ISA) && defined(MULTI_ISA)
- if (MACH_IS_Q40) {
- isa_type = ISA_TYPE_Q40;
- isa_sex = 0;
- }
-+#ifdef CONFIG_GG2
-+ if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)) {
-+ isa_type = ISA_TYPE_GG2;
-+ isa_sex = 0;
-+ }
-+#endif
- #ifdef CONFIG_AMIGA_PCMCIA
- if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
- isa_type = ISA_TYPE_AG;
-@@ -377,6 +422,7 @@ static int show_cpuinfo(struct seq_file
- #define LOOP_CYCLES_68030 (8)
- #define LOOP_CYCLES_68040 (3)
- #define LOOP_CYCLES_68060 (1)
-+#define LOOP_CYCLES_COLDFIRE (2)
-
- if (CPU_IS_020) {
- cpu = "68020";
-@@ -390,6 +436,9 @@ static int show_cpuinfo(struct seq_file
- } else if (CPU_IS_060) {
- cpu = "68060";
- clockfactor = LOOP_CYCLES_68060;
-+ } else if (CPU_IS_CFV4E) {
-+ cpu = "ColdFire V4e";
-+ clockfactor = LOOP_CYCLES_COLDFIRE;
- } else {
- cpu = "680x0";
- clockfactor = 0;
-@@ -408,6 +457,8 @@ static int show_cpuinfo(struct seq_file
- fpu = "68060";
- else if (m68k_fputype & FPU_SUNFPA)
- fpu = "Sun FPA";
-+ else if (m68k_fputype & FPU_CFV4E)
-+ fpu = "ColdFire V4e";
- else
- fpu = "none";
- #endif
-@@ -424,6 +475,8 @@ static int show_cpuinfo(struct seq_file
- mmu = "Sun-3";
- else if (m68k_mmutype & MMU_APOLLO)
- mmu = "Apollo";
-+ else if (m68k_mmutype & MMU_CFV4E)
-+ mmu = "ColdFire";
- else
- mmu = "unknown";
-
-@@ -506,7 +559,8 @@ module_init(proc_hardware_init);
-
- void check_bugs(void)
- {
--#ifndef CONFIG_M68KFPU_EMU
-+#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M5445X) && \
-+ !defined(CONFIG_M5441X)
- if (m68k_fputype == 0) {
- printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
- "WHICH IS REQUIRED BY LINUX/M68K ***\n");
---- a/arch/m68k/kernel/sys_m68k.c
-+++ b/arch/m68k/kernel/sys_m68k.c
-@@ -1,5 +1,12 @@
- /*
- * linux/arch/m68k/kernel/sys_m68k.c
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/m68k
-@@ -29,6 +36,9 @@
- #include <asm/unistd.h>
- #include <linux/elf.h>
- #include <asm/tlb.h>
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cacheflush.h>
-+#endif
-
- asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
- unsigned long error_code);
-@@ -45,6 +55,59 @@ asmlinkage long sys_mmap2(unsigned long
- return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
- }
-
-+/*
-+ * Perform the select(nd, in, out, ex, tv) and mmap() system
-+ * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
-+ * handle more than 4 system call parameters, so these system calls
-+ * used a memory block for parameter passing..
-+ */
-+
-+struct mmap_arg_struct {
-+ unsigned long addr;
-+ unsigned long len;
-+ unsigned long prot;
-+ unsigned long flags;
-+ unsigned long fd;
-+ unsigned long offset;
-+};
-+
-+asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-+{
-+ struct mmap_arg_struct a;
-+ int error = -EFAULT;
-+
-+ if (copy_from_user(&a, arg, sizeof(a)))
-+ goto out;
-+
-+ error = -EINVAL;
-+ if (a.offset & ~PAGE_MASK)
-+ goto out;
-+
-+ a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-+
-+ error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags,
-+ a.fd, a.offset >> PAGE_SHIFT);
-+out:
-+ return error;
-+}
-+
-+struct sel_arg_struct {
-+ unsigned long n;
-+ fd_set __user *inp, *outp, *exp;
-+ struct timeval __user *tvp;
-+};
-+
-+asmlinkage int old_select(struct sel_arg_struct __user *arg)
-+{
-+ struct sel_arg_struct a;
-+
-+ if (copy_from_user(&a, arg, sizeof(a)))
-+ return -EFAULT;
-+ /* sys_select() does the appropriate kernel locking */
-+ return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-+}
-+
-+#ifndef CONFIG_COLDFIRE
- /* Convert virtual (user) address VADDR to physical address PADDR */
- #define virt_to_phys_040(vaddr) \
- ({ \
-@@ -368,6 +431,7 @@ cache_flush_060 (unsigned long addr, int
- }
- return 0;
- }
-+#endif /* CONFIG_COLDFIRE */
-
- /* sys_cacheflush -- flush (part of) the processor cache. */
- asmlinkage int
-@@ -399,6 +463,7 @@ sys_cacheflush (unsigned long addr, int
- goto out;
- }
-
-+#ifndef CONFIG_COLDFIRE
- if (CPU_IS_020_OR_030) {
- if (scope == FLUSH_SCOPE_LINE && len < 256) {
- unsigned long cacr;
-@@ -443,6 +508,16 @@ sys_cacheflush (unsigned long addr, int
- ret = cache_flush_060 (addr, scope, cache, len);
- }
- }
-+#else /* CONFIG_COLDFIRE */
-+ if ((cache & FLUSH_CACHE_INSN) && (cache & FLUSH_CACHE_DATA))
-+ flush_bcache();
-+ else if (cache & FLUSH_CACHE_INSN)
-+ flush_icache();
-+ else
-+ flush_dcache();
-+
-+ ret = 0;
-+#endif /* CONFIG_COLDFIRE */
- out:
- return ret;
- }
-@@ -474,9 +549,14 @@ asmlinkage unsigned long sys_get_thread_
- return current_thread_info()->tp_value;
- }
-
-+extern void *_vdso_tp;
-+
- asmlinkage int sys_set_thread_area(unsigned long tp)
- {
- current_thread_info()->tp_value = tp;
-+#ifdef CONFIG_VDSO
-+ *(unsigned long *)_vdso_tp = tp;
-+#endif
- return 0;
- }
-
---- a/arch/m68k/kernel/time.c
-+++ b/arch/m68k/kernel/time.c
-@@ -2,6 +2,14 @@
- * linux/arch/m68k/kernel/time.c
- *
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ * Alison Wang b18965@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- *
- * This file contains the m68k-specific time handling details.
- * Most of the stuff is located in the machine specific files.
-@@ -9,9 +17,12 @@
- * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
- * "A Kernel Model for Precision Timekeeping" by Dave Mills
- */
--
-+#include <linux/clk.h>
-+#include <linux/clocksource.h>
-+#include <linux/clockchips.h>
- #include <linux/errno.h>
- #include <linux/module.h>
-+#include <linux/sysdev.h>
- #include <linux/sched.h>
- #include <linux/kernel.h>
- #include <linux/param.h>
-@@ -27,6 +38,7 @@
- #include <linux/time.h>
- #include <linux/timex.h>
- #include <linux/profile.h>
-+#include <asm/mcfsim.h>
-
- static inline int set_rtc_mmss(unsigned long nowtime)
- {
-@@ -35,12 +47,18 @@ static inline int set_rtc_mmss(unsigned
- return -1;
- }
-
-+#ifndef CONFIG_GENERIC_CLOCKEVENTS
- /*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
- static irqreturn_t timer_interrupt(int irq, void *dummy)
- {
-+#ifdef CONFIG_COLDFIRE
-+ /* kick hardware timer if necessary */
-+ if (mach_tick)
-+ mach_tick();
-+#endif
- do_timer(1);
- update_process_times(user_mode(get_irq_regs()));
- profile_tick(CPU_PROFILING);
-@@ -91,11 +109,133 @@ void __init time_init(void)
- {
- mach_sched_init(timer_interrupt);
- }
-+#endif
-
-+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
- u32 arch_gettimeoffset(void)
- {
- return mach_gettimeoffset() * 1000;
- }
-+#endif
-+
-+#ifdef CONFIG_GENERIC_CLOCKEVENTS
-+
-+extern unsigned long long sys_dtim2_read(void);
-+extern void sys_dtim2_init(void);
-+static int cfv4_set_next_event(unsigned long evt,
-+ struct clock_event_device *dev);
-+static void cfv4_set_mode(enum clock_event_mode mode,
-+ struct clock_event_device *dev);
-+
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+#define FREQ (MCF_BUSCLK / 16)
-+#else
-+#define FREQ (MCF_BUSCLK)
-+#endif
-+
-+/*
-+ * Clock Evnt setup
-+ */
-+static struct clock_event_device clockevent_cfv4 = {
-+ .name = "CFV4 timer2even",
-+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-+ .rating = 200,
-+ .shift = 20,
-+ .set_mode = cfv4_set_mode,
-+ .set_next_event = cfv4_set_next_event,
-+};
-+
-+static int cfv4_set_next_event(unsigned long evt,
-+ struct clock_event_device *dev)
-+{
-+ return 0;
-+}
-+
-+static void cfv4_set_mode(enum clock_event_mode mode,
-+ struct clock_event_device *dev)
-+{
-+ if (mode != CLOCK_EVT_MODE_ONESHOT)
-+ cfv4_set_next_event((FREQ / HZ), dev);
-+}
-+
-+static int __init cfv4_clockevent_init(void)
-+{
-+ clockevent_cfv4.mult =
-+ div_sc(FREQ, NSEC_PER_SEC,
-+ clockevent_cfv4.shift);
-+ clockevent_cfv4.max_delta_ns =
-+ clockevent_delta2ns((FREQ / HZ),
-+ &clockevent_cfv4);
-+ clockevent_cfv4.min_delta_ns =
-+ clockevent_delta2ns(1, &clockevent_cfv4);
-+
-+ clockevent_cfv4.cpumask = &cpumask_of_cpu(0);
-+
-+ printk(KERN_INFO "timer: register clockevent\n");
-+ clockevents_register_device(&clockevent_cfv4);
-+
-+ return 0;
-+}
-+
-+/*
-+ * clocksource setup
-+ */
-+
-+struct clocksource clocksource_cfv4 = {
-+ .name = "ColdfireV4",
-+ .rating = 250,
-+ .mask = CLOCKSOURCE_MASK(32),
-+ .read = sys_dtim2_read,
-+ .shift = 20,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+/*
-+ * Initialize time subsystem. Called from linux/init/main.c
-+ */
-+void __init time_init(void)
-+{
-+ int ret;
-+
-+ printk(KERN_INFO "Initializing time\n");
-+
-+ cfv4_clockevent_init();
-+ /* initialize the system timer */
-+ sys_dtim2_init();
-+
-+ /* JKM */
-+ clocksource_cfv4.mult = clocksource_hz2mult(FREQ,
-+ clocksource_cfv4.shift);
-+
-+ /* register our clocksource */
-+ ret = clocksource_register(&clocksource_cfv4);
-+ if (ret)
-+ printk(KERN_ERR "timer: unable to "
-+ "register clocksource - %d\n", ret);
-+}
-+
-+/*
-+ * sysfs pieces
-+ */
-+
-+static struct sysdev_class timer_class = {
-+ .name = "timer",
-+};
-+
-+static struct sys_device timer_device = {
-+ .id = 0,
-+ .cls = &timer_class,
-+};
-+
-+static int __init timer_init_sysfs(void)
-+{
-+ int err = sysdev_class_register(&timer_class);
-+ if (!err)
-+ err = sysdev_register(&timer_device);
-+ return err;
-+}
-+device_initcall(timer_init_sysfs);
-+#endif /* CONFIG_GENERIC_CLOCKEVENTS */
-
- static int __init rtc_init(void)
- {
---- /dev/null
-+++ b/arch/m68k/kernel/vmlinux-cf.lds
-@@ -0,0 +1,142 @@
-+/* ld script to make m68k Coldfire Linux kernel
-+ *
-+ * Derived from arch/m68k/kernel/vmlinux-std.lds
-+ *
-+ * Updated 11/26/2007 for new CodeSourcery toolset
-+ * by Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#define LOAD_OFFSET 0x00000000
-+
-+#include <asm-generic/vmlinux.lds.h>
-+#include <asm/page_offset.h>
-+
-+#define START_OFFSET 0x00020000
-+#define IMAGE_START PAGE_OFFSET_RAW + START_OFFSET
-+
-+OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
-+OUTPUT_ARCH(m68k)
-+ENTRY(_stext)
-+jiffies = jiffies_64 + 4;
-+
-+SECTIONS
-+{
-+ . = IMAGE_START;
-+ .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
-+ _text = .; /* Text and read-only data */
-+ *(.text.head)
-+ } :text = 0x4e75
-+
-+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
-+ TEXT_TEXT
-+ SCHED_TEXT
-+ LOCK_TEXT
-+ *(.fixup)
-+ *(.gnu.warning)
-+ } :text = 0x4e75
-+ _etext = .; /* End of text section */
-+
-+ . = ALIGN(16);
-+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-+ __start___ex_table = .;
-+ *(__ex_table)
-+ __stop___ex_table = .;
-+ }
-+
-+ RODATA
-+
-+ . = ALIGN(8192);
-+ .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
-+ DATA_DATA
-+ CONSTRUCTORS
-+ } :data
-+
-+
-+ . = ALIGN(16);
-+ .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET ) {
-+ *(.data.cacheline_aligned)
-+ } :data
-+
-+ _edata = .; /* End of data section */
-+
-+ NOTES /* support ld --build-id */
-+
-+ . = ALIGN(8192); /* Initrd */
-+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-+ __init_begin = .;
-+ _sinittext = .;
-+ *(.init.text)
-+ _einittext = .;
-+ }
-+
-+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
-+ *(.init.data)
-+ }
-+
-+ . = ALIGN(16);
-+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-+ __setup_start = .;
-+ *(.init.setup)
-+ __setup_end = .;
-+ }
-+
-+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-+ __initcall_start = .;
-+ INITCALLS
-+ __initcall_end = .;
-+ }
-+
-+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-+ __con_initcall_start = .;
-+ *(.con_initcall.init)
-+ __con_initcall_end = .;
-+ }
-+
-+ SECURITY_INIT
-+
-+#ifdef CONFIG_BLK_DEV_INITRD
-+ . = ALIGN(8192);
-+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-+ __initramfs_start = .;
-+ *(.init.ramfs)
-+ __initramfs_end = .;
-+ }
-+#endif
-+
-+ . = ALIGN(8192);
-+ __init_end = .;
-+
-+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-+ *(.data.init_task) /* The initial task and kernel stack */
-+ }
-+
-+ _sbss = .;
-+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) { /* BSS */
-+ *(.bss)
-+ }
-+ _ebss = .;
-+
-+ _end = . ;
-+
-+ __ctors_start = . ;
-+
-+ __ctors_end = . ;
-+
-+ /* Sections to be discarded */
-+ /DISCARD/ : {
-+ *(.exit.text)
-+ *(.exit.data)
-+ *(.exitcall.exit)
-+ }
-+
-+ /* Stabs debugging sections. */
-+ STABS_DEBUG
-+}
---- a/arch/m68k/kernel/vmlinux.lds.S
-+++ b/arch/m68k/kernel/vmlinux.lds.S
-@@ -1,10 +1,20 @@
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
- PHDRS
- {
-- text PT_LOAD FILEHDR PHDRS FLAGS (7);
-+ headers PT_PHDR PHDRS ;
-+ text PT_LOAD FILEHDR PHDRS FLAGS (5);
- data PT_LOAD FLAGS (7);
- }
- #ifdef CONFIG_SUN3
- #include "vmlinux-sun3.lds"
-+#elif CONFIG_COLDFIRE
-+#include "vmlinux-cf.lds"
- #else
- #include "vmlinux-std.lds"
- #endif
---- a/arch/m68k/lib/checksum.c
-+++ b/arch/m68k/lib/checksum.c
-@@ -30,6 +30,10 @@
- * 1998/8/31 Andreas Schwab:
- * Zero out rest of buffer on exception in
- * csum_partial_copy_from_user.
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
- */
-
- #include <linux/module.h>
-@@ -39,8 +43,132 @@
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-
-+#ifdef CONFIG_COLDFIRE
-+
-+static inline unsigned short from32to16(unsigned long x)
-+{
-+ /* add up 16-bit and 16-bit for 16+c bit */
-+ x = (x & 0xffff) + (x >> 16);
-+ /* add up carry.. */
-+ x = (x & 0xffff) + (x >> 16);
-+ return x;
-+}
-+
-+static unsigned long do_csum(const unsigned char *buff, int len)
-+{
-+ int odd, count;
-+ unsigned long result = 0;
-+
-+ if (len <= 0)
-+ goto out;
-+ odd = 1 & (unsigned long) buff;
-+ if (odd) {
-+ result = *buff;
-+ len--;
-+ buff++;
-+ }
-+ count = len >> 1; /* nr of 16-bit words.. */
-+ if (count) {
-+ if (2 & (unsigned long) buff) {
-+ result += *(unsigned short *) buff;
-+ count--;
-+ len -= 2;
-+ buff += 2;
-+ }
-+ count >>= 1; /* nr of 32-bit words.. */
-+ if (count) {
-+ unsigned long carry = 0;
-+ do {
-+ unsigned long w = *(unsigned long *) buff;
-+ count--;
-+ buff += 4;
-+ result += carry;
-+ result += w;
-+ carry = (w > result);
-+ } while (count);
-+ result += carry;
-+ result = (result & 0xffff) + (result >> 16);
-+ }
-+ if (len & 2) {
-+ result += *(unsigned short *) buff;
-+ buff += 2;
-+ }
-+ }
-+ if (len & 1)
-+ result += (*buff << 8);
-+ result = from32to16(result);
-+ if (odd)
-+ result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-+out:
-+ return result;
-+}
-+
-+/*
-+ * This is a version of ip_compute_csum() optimized for IP headers,
-+ * which always checksum on 4 octet boundaries.
-+ */
-+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-+{
-+ return ~do_csum(iph, ihl*4);
-+}
-+EXPORT_SYMBOL(ip_fast_csum);
-+
-+/*
-+ * computes the checksum of a memory block at buff, length len,
-+ * and adds in "sum" (32-bit)
-+ *
-+ * returns a 32-bit number suitable for feeding into itself
-+ * or csum_tcpudp_magic
-+ *
-+ * this function must be called with even lengths, except
-+ * for the last fragment, which may be odd
-+ *
-+ * it's best to have buff aligned on a 32-bit boundary
-+ */
- __wsum csum_partial(const void *buff, int len, __wsum sum)
- {
-+ unsigned int result = do_csum(buff, len);
-+
-+ /* add in old sum, and carry.. */
-+ result += sum;
-+ if (sum > result)
-+ result += 1;
-+ return result;
-+}
-+EXPORT_SYMBOL(csum_partial);
-+
-+/*
-+ * copy from fs while checksumming, otherwise like csum_partial
-+ */
-+
-+__wsum
-+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-+ __wsum sum, int *csum_err)
-+{
-+ if (csum_err)
-+ *csum_err = 0;
-+ memcpy(dst, src, len);
-+ return csum_partial(dst, len, sum);
-+}
-+EXPORT_SYMBOL(csum_partial_copy_from_user);
-+
-+/*
-+ * copy from ds while checksumming, otherwise like csum_partial
-+ */
-+
-+__wsum
-+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-+{
-+ memcpy(dst, src, len);
-+ return csum_partial(dst, len, sum);
-+}
-+EXPORT_SYMBOL(csum_partial_copy_nocheck);
-+
-+#else /* !CONFIG_COLDFIRE */
-+
-+unsigned int
-+csum_partial(const unsigned char *buff, int len, unsigned int sum)
-+{
- unsigned long tmp1, tmp2;
- /*
- * Experiments with ethernet and slip connections show that buff
-@@ -423,3 +551,4 @@ csum_partial_copy_nocheck(const void *sr
- return(sum);
- }
- EXPORT_SYMBOL(csum_partial_copy_nocheck);
-+#endif /* CONFIG_COLDFIRE */
---- a/arch/m68k/lib/muldi3.c
-+++ b/arch/m68k/lib/muldi3.c
-@@ -1,6 +1,9 @@
- /* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and
- gcc-2.7.2.3/longlong.h which is: */
- /* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-+ Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ Jason Jin Jason.Jin@freescale.com
-+ Shrek Wu B16972@freescale.com
-
- This file is part of GNU CC.
-
-@@ -21,12 +24,22 @@ Boston, MA 02111-1307, USA. */
-
- #define BITS_PER_UNIT 8
-
-+#ifdef CONFIG_COLDFIRE
-+#define umul_ppmm(w1, w0, u, v) \
-+ do { \
-+ unsigned long long x; \
-+ x = (unsigned long long)u * v; \
-+ w0 = (unsigned long)(x & 0x00000000ffffffff); \
-+ w1 = (unsigned long)(x & 0xffffffff00000000) >> 32; \
-+ } while (0)
-+#else /* CONFIG_COLDFIRE */
- #define umul_ppmm(w1, w0, u, v) \
- __asm__ ("mulu%.l %3,%1:%0" \
- : "=d" ((USItype)(w0)), \
- "=d" ((USItype)(w1)) \
- : "%0" ((USItype)(u)), \
- "dmi" ((USItype)(v)))
-+#endif /* CONFIG_COLDFIRE */
-
- #define __umulsidi3(u, v) \
- ({DIunion __w; \
---- a/arch/m68k/lib/string.c
-+++ b/arch/m68k/lib/string.c
-@@ -1,4 +1,8 @@
- /*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
-@@ -21,6 +25,7 @@ char *strcat(char *dest, const char *src
- }
- EXPORT_SYMBOL(strcat);
-
-+#ifndef CONFIG_COLDFIRE
- void *memset(void *s, int c, size_t count)
- {
- void *xs = s;
-@@ -149,6 +154,69 @@ void *memcpy(void *to, const void *from,
- }
- EXPORT_SYMBOL(memcpy);
-
-+#else /* CONFIG_COLDFIRE */
-+
-+void *memset(void *s, int c, size_t count)
-+{
-+ unsigned long x;
-+ void *originalTo = s;
-+
-+ for (x = 0; x < count; x++)
-+ *(unsigned char *)s++ = (unsigned char)c;
-+
-+ return originalTo;
-+}
-+EXPORT_SYMBOL(memset);
-+
-+void *memcpy(void *to, const void *from, size_t n)
-+{
-+ void *xto = to;
-+ size_t temp;
-+
-+ if (!n)
-+ return xto;
-+ if ((long) to & 1) {
-+ char *cto = to;
-+ const char *cfrom = from;
-+ *cto++ = *cfrom++;
-+ to = cto;
-+ from = cfrom;
-+ n--;
-+ }
-+ if (n > 2 && (long) to & 2) {
-+ short *sto = to;
-+ const short *sfrom = from;
-+ *sto++ = *sfrom++;
-+ to = sto;
-+ from = sfrom;
-+ n -= 2;
-+ }
-+ temp = n >> 2;
-+ if (temp) {
-+ long *lto = to;
-+ const long *lfrom = from;
-+ for (; temp; temp--)
-+ *lto++ = *lfrom++;
-+ to = lto;
-+ from = lfrom;
-+ }
-+ if (n & 2) {
-+ short *sto = to;
-+ const short *sfrom = from;
-+ *sto++ = *sfrom++;
-+ to = sto;
-+ from = sfrom;
-+ }
-+ if (n & 1) {
-+ char *cto = to;
-+ const char *cfrom = from;
-+ *cto = *cfrom;
-+ }
-+ return xto;
-+}
-+EXPORT_SYMBOL(memcpy);
-+#endif /* CONFIG_COLDFIRE */
-+
- void *memmove(void *dest, const void *src, size_t n)
- {
- void *xdest = dest;
---- a/arch/m68k/lib/uaccess.c
-+++ b/arch/m68k/lib/uaccess.c
-@@ -1,10 +1,15 @@
- /*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
- #include <linux/module.h>
-+#ifndef CONFIG_COLDFIRE
- #include <asm/uaccess.h>
-
- unsigned long __generic_copy_from_user(void *to, const void __user *from,
-@@ -220,3 +225,245 @@ unsigned long __clear_user(void __user *
- return res;
- }
- EXPORT_SYMBOL(__clear_user);
-+
-+#else /* CONFIG_COLDFIRE */
-+
-+#include <asm/cf_uaccess.h>
-+
-+unsigned long __generic_copy_from_user(void *to, const void *from,
-+ unsigned long n)
-+{
-+ unsigned long tmp;
-+ __asm__ __volatile__
-+ (" tstl %2\n"
-+ " jeq 2f\n"
-+ "1: movel (%1)+,%3\n"
-+ " movel %3,(%0)+\n"
-+ " subql #1,%2\n"
-+ " jne 1b\n"
-+ "2: movel %4,%2\n"
-+ " bclr #1,%2\n"
-+ " jeq 4f\n"
-+ "3: movew (%1)+,%3\n"
-+ " movew %3,(%0)+\n"
-+ "4: bclr #0,%2\n"
-+ " jeq 6f\n"
-+ "5: moveb (%1)+,%3\n"
-+ " moveb %3,(%0)+\n"
-+ "6:\n"
-+ ".section .fixup,\"ax\"\n"
-+ " .even\n"
-+ "7: movel %2,%%d0\n"
-+ "71:clrl (%0)+\n"
-+ " subql #1,%%d0\n"
-+ " jne 71b\n"
-+ " lsll #2,%2\n"
-+ " addl %4,%2\n"
-+ " btst #1,%4\n"
-+ " jne 81f\n"
-+ " btst #0,%4\n"
-+ " jne 91f\n"
-+ " jra 6b\n"
-+ "8: addql #2,%2\n"
-+ "81:clrw (%0)+\n"
-+ " btst #0,%4\n"
-+ " jne 91f\n"
-+ " jra 6b\n"
-+ "9: addql #1,%2\n"
-+ "91:clrb (%0)+\n"
-+ " jra 6b\n"
-+ ".previous\n"
-+ ".section __ex_table,\"a\"\n"
-+ " .align 4\n"
-+ " .long 1b,7b\n"
-+ " .long 3b,8b\n"
-+ " .long 5b,9b\n"
-+ ".previous"
-+ : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp)
-+ : "d"(n & 3), "0"(to), "1"(from), "2"(n/4)
-+ : "d0", "memory");
-+ return n;
-+}
-+EXPORT_SYMBOL(__generic_copy_from_user);
-+
-+
-+unsigned long __generic_copy_to_user(void *to, const void *from,
-+ unsigned long n)
-+{
-+ unsigned long tmp;
-+ __asm__ __volatile__
-+ (" tstl %2\n"
-+ " jeq 3f\n"
-+ "1: movel (%1)+,%3\n"
-+ "22:movel %3,(%0)+\n"
-+ "2: subql #1,%2\n"
-+ " jne 1b\n"
-+ "3: movel %4,%2\n"
-+ " bclr #1,%2\n"
-+ " jeq 4f\n"
-+ " movew (%1)+,%3\n"
-+ "24:movew %3,(%0)+\n"
-+ "4: bclr #0,%2\n"
-+ " jeq 5f\n"
-+ " moveb (%1)+,%3\n"
-+ "25:moveb %3,(%0)+\n"
-+ "5:\n"
-+ ".section .fixup,\"ax\"\n"
-+ " .even\n"
-+ "60:addql #1,%2\n"
-+ "6: lsll #2,%2\n"
-+ " addl %4,%2\n"
-+ " jra 5b\n"
-+ "7: addql #2,%2\n"
-+ " jra 5b\n"
-+ "8: addql #1,%2\n"
-+ " jra 5b\n"
-+ ".previous\n"
-+ ".section __ex_table,\"a\"\n"
-+ " .align 4\n"
-+ " .long 1b,60b\n"
-+ " .long 22b,6b\n"
-+ " .long 2b,6b\n"
-+ " .long 24b,7b\n"
-+ " .long 3b,60b\n"
-+ " .long 4b,7b\n"
-+ " .long 25b,8b\n"
-+ " .long 5b,8b\n"
-+ ".previous"
-+ : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp)
-+ : "r"(n & 3), "0"(to), "1"(from), "2"(n / 4)
-+ : "memory");
-+ return n;
-+}
-+EXPORT_SYMBOL(__generic_copy_to_user);
-+
-+/*
-+ * Copy a null terminated string from userspace.
-+ */
-+
-+long strncpy_from_user(char *dst, const char *src, long count)
-+{
-+ long res = -EFAULT;
-+ if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */
-+ return res;
-+ if (count == 0)
-+ return count;
-+ __asm__ __volatile__
-+ ("1: moveb (%2)+,%%d0\n"
-+ "12:moveb %%d0,(%1)+\n"
-+ " jeq 2f\n"
-+ " subql #1,%3\n"
-+ " jne 1b\n"
-+ "2: subl %3,%0\n"
-+ "3:\n"
-+ ".section .fixup,\"ax\"\n"
-+ " .even\n"
-+ "4: movel %4,%0\n"
-+ " jra 3b\n"
-+ ".previous\n"
-+ ".section __ex_table,\"a\"\n"
-+ " .align 4\n"
-+ " .long 1b,4b\n"
-+ " .long 12b,4b\n"
-+ ".previous"
-+ : "=d"(res), "=a"(dst), "=a"(src), "=d"(count)
-+ : "i"(-EFAULT), "0"(count), "1"(dst), "2"(src), "3"(count)
-+ : "d0", "memory");
-+ return res;
-+}
-+EXPORT_SYMBOL(strncpy_from_user);
-+
-+/*
-+ * Return the size of a string (including the ending 0)
-+ *
-+ * Return 0 on exception, a value greater than N if too long
-+ */
-+long strnlen_user(const char *src, long n)
-+{
-+ long res = -EFAULT;
-+ if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */
-+ return res;
-+
-+ res = -(long)src;
-+ __asm__ __volatile__
-+ ("1:\n"
-+ " tstl %2\n"
-+ " jeq 3f\n"
-+ "2: moveb (%1)+,%%d0\n"
-+ "22:\n"
-+ " subql #1,%2\n"
-+ " tstb %%d0\n"
-+ " jne 1b\n"
-+ " jra 4f\n"
-+ "3:\n"
-+ " addql #1,%0\n"
-+ "4:\n"
-+ " addl %1,%0\n"
-+ "5:\n"
-+ ".section .fixup,\"ax\"\n"
-+ " .even\n"
-+ "6: moveq %3,%0\n"
-+ " jra 5b\n"
-+ ".previous\n"
-+ ".section __ex_table,\"a\"\n"
-+ " .align 4\n"
-+ " .long 2b,6b\n"
-+ " .long 22b,6b\n"
-+ ".previous"
-+ : "=d"(res), "=a"(src), "=d"(n)
-+ : "i"(0), "0"(res), "1"(src), "2"(n)
-+ : "d0");
-+ return res;
-+}
-+EXPORT_SYMBOL(strnlen_user);
-+
-+
-+/*
-+ * Zero Userspace
-+ */
-+
-+unsigned long __clear_user(void *to, unsigned long n)
-+{
-+ __asm__ __volatile__
-+ (" tstl %1\n"
-+ " jeq 3f\n"
-+ "1: movel %3,(%0)+\n"
-+ "2: subql #1,%1\n"
-+ " jne 1b\n"
-+ "3: movel %2,%1\n"
-+ " bclr #1,%1\n"
-+ " jeq 4f\n"
-+ "24:movew %3,(%0)+\n"
-+ "4: bclr #0,%1\n"
-+ " jeq 5f\n"
-+ "25:moveb %3,(%0)+\n"
-+ "5:\n"
-+ ".section .fixup,\"ax\"\n"
-+ " .even\n"
-+ "61:addql #1,%1\n"
-+ "6: lsll #2,%1\n"
-+ " addl %2,%1\n"
-+ " jra 5b\n"
-+ "7: addql #2,%1\n"
-+ " jra 5b\n"
-+ "8: addql #1,%1\n"
-+ " jra 5b\n"
-+ ".previous\n"
-+ ".section __ex_table,\"a\"\n"
-+ " .align 4\n"
-+ " .long 1b,61b\n"
-+ " .long 2b,6b\n"
-+ " .long 3b,61b\n"
-+ " .long 24b,7b\n"
-+ " .long 4b,7b\n"
-+ " .long 25b,8b\n"
-+ " .long 5b,8b\n"
-+ ".previous"
-+ : "=a"(to), "=d"(n)
-+ : "r"(n & 3), "d"(0), "0"(to), "1"(n/4));
-+ return n;
-+}
-+EXPORT_SYMBOL(__clear_user);
-+
-+#endif /* CONFIG_COLDFIRE */
-+
---- a/arch/m68k/mm/Makefile
-+++ b/arch/m68k/mm/Makefile
-@@ -6,3 +6,5 @@ obj-y := cache.o init.o fault.o hwtest.
-
- obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o
- obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o
-+obj-$(CONFIG_MMU_CFV4E) += cf-mmu.o kmap.o memory.o
-+obj-$(CONFIG_SRAM) += cf-sram.o
---- a/arch/m68k/mm/cache.c
-+++ b/arch/m68k/mm/cache.c
-@@ -4,13 +4,24 @@
- * Instruction cache handling
- *
- * Copyright (C) 1995 Hamish Macdonald
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
-
- #include <linux/module.h>
- #include <asm/pgalloc.h>
- #include <asm/traps.h>
-
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cfcache.h>
-+#endif /* CONFIG_COLDFIRE */
-
-+#ifndef CONFIG_COLDFIRE
- static unsigned long virt_to_phys_slow(unsigned long vaddr)
- {
- if (CPU_IS_060) {
-@@ -69,11 +80,16 @@ static unsigned long virt_to_phys_slow(u
- }
- return 0;
- }
-+#endif /* CONFIG_COLDFIRE */
-+
-
- /* Push n pages at kernel virtual address and clear the icache */
- /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
- void flush_icache_range(unsigned long address, unsigned long endaddr)
- {
-+#ifdef CONFIG_COLDFIRE
-+ flush_icache();
-+#else /* !CONFIG_COLDFIRE */
-
- if (CPU_IS_040_OR_060) {
- address &= PAGE_MASK;
-@@ -94,9 +110,11 @@ void flush_icache_range(unsigned long ad
- : "=&d" (tmp)
- : "di" (FLUSH_I));
- }
-+#endif /* CONFIG_COLDFIRE */
- }
- EXPORT_SYMBOL(flush_icache_range);
-
-+#ifndef CONFIG_COLDFIRE
- void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
- unsigned long addr, int len)
- {
-@@ -115,4 +133,5 @@ void flush_icache_user_range(struct vm_a
- : "di" (FLUSH_I));
- }
- }
-+#endif /* CONFIG_COLDFIRE */
-
---- /dev/null
-+++ b/arch/m68k/mm/cf-mmu.c
-@@ -0,0 +1,311 @@
-+/*
-+ * linux/arch/m68k/mm/cf-mmu.c
-+ *
-+ * Based upon linux/arch/m68k/mm/sun3mmu.c
-+ * Based upon linux/arch/ppc/mm/mmu_context.c
-+ *
-+ * Implementations of mm routines specific to the Coldfire MMU.
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/swap.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#ifdef CONFIG_BLK_DEV_RAM
-+#include <linux/blkdev.h>
-+#endif
-+#include <linux/bootmem.h>
-+
-+#include <asm/setup.h>
-+#include <asm/uaccess.h>
-+#include <asm/page.h>
-+#include <asm/pgtable.h>
-+#include <asm/system.h>
-+#include <asm/machdep.h>
-+#include <asm/io.h>
-+#include <asm/mmu_context.h>
-+#include <asm/cf_pgalloc.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/tlbflush.h>
-+
-+#define KMAPAREA(x) ((x >= VMALLOC_START) && (x < KMAP_END))
-+
-+#undef DEBUG
-+
-+#ifdef CONFIG_VDSO
-+unsigned long next_mmu_context;
-+#else
-+mm_context_t next_mmu_context;
-+#endif
-+
-+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-+
-+atomic_t nr_free_contexts;
-+struct mm_struct *context_mm[LAST_CONTEXT+1];
-+const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n";
-+
-+extern unsigned long num_pages;
-+EXPORT_SYMBOL(num_pages);
-+/*
-+ * Free memory used for system initialization.
-+ */
-+void free_initmem(void)
-+{
-+#if 0
-+ unsigned long addr;
-+ unsigned long start = (unsigned long)&__init_begin;
-+ unsigned long end = (unsigned long)&__init_end;
-+
-+ printk(KERN_INFO "free_initmem: __init_begin = 0x%lx"
-+ " __init_end = 0x%lx\n", start, end);
-+
-+ addr = (unsigned long)&__init_begin;
-+ for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) {
-+ /* not currently used */
-+ virt_to_page(addr)->flags &= ~(1 << PG_reserved);
-+ init_page_count(virt_to_page(addr));
-+ free_page(addr);
-+ totalram_pages++;
-+ }
-+#endif
-+}
-+
-+/*
-+ * Initialize the paging system.
-+ */
-+void __init paging_init(void)
-+{
-+ pgd_t *pg_dir;
-+ pte_t *pg_table;
-+ int i;
-+ unsigned long address;
-+ unsigned long next_pgtable;
-+ unsigned long zones_size[MAX_NR_ZONES];
-+ unsigned long size;
-+ enum zone_type zone;
-+
-+ /* allocate zero page */
-+ empty_zero_page = (void *)alloc_bootmem_pages(PAGE_SIZE);
-+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
-+
-+ /* zero kernel page directory */
-+ pg_dir = swapper_pg_dir;
-+ memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
-+ /*
-+ * setup page tables for PHYSRAM
-+ */
-+
-+ /* starting loc in page directory */
-+ pg_dir += PAGE_OFFSET >> PGDIR_SHIFT;
-+
-+ /* allocate page tables */
-+ size = num_pages * sizeof(pte_t);
-+ size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
-+ next_pgtable = (unsigned long)alloc_bootmem_pages(size);
-+ address = PAGE_OFFSET;
-+ while (address < (unsigned long)high_memory) {
-+ /* setup page table in page directory */
-+ pg_table = (pte_t *)next_pgtable;
-+ next_pgtable += PTRS_PER_PTE * sizeof(pte_t);
-+ pgd_val(*pg_dir) = (unsigned long)pg_table;
-+ pg_dir++;
-+
-+ /* create PTEs in page table */
-+ for (i = 0; i < PTRS_PER_PTE; ++i, ++pg_table) {
-+ pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
-+ if (address >= (unsigned long)high_memory)
-+ pte_val(pte) = 0;
-+
-+ set_pte(pg_table, pte);
-+ address += PAGE_SIZE;
-+ }
-+ }
-+
-+ /*
-+ * setup page tables for DMA area
-+ */
-+
-+ /* starting loc in page directory */
-+ pg_dir = swapper_pg_dir;
-+ pg_dir += CONFIG_DMA_BASE >> PGDIR_SHIFT;
-+
-+ /* allocate page tables */
-+ size = (CONFIG_DMA_SIZE >> PAGE_SHIFT) * sizeof(pte_t);
-+ size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
-+ next_pgtable = (unsigned long)alloc_bootmem_pages(size);
-+ address = CONFIG_DMA_BASE;
-+ while (address < (CONFIG_DMA_BASE + CONFIG_DMA_SIZE)) {
-+ /* setup page table in page directory */
-+ pg_table = (pte_t *)next_pgtable;
-+ next_pgtable += PTRS_PER_PTE * sizeof(pte_t);
-+ pgd_val(*pg_dir) = (unsigned long)pg_table;
-+ pg_dir++;
-+
-+ /* create PTEs in page table */
-+ for (i = 0; i < PTRS_PER_PTE; ++i, ++pg_table) {
-+ pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
-+ if (address >= (CONFIG_DMA_BASE + CONFIG_DMA_SIZE))
-+ pte_val(pte) = 0;
-+
-+ set_pte(pg_table, pte);
-+ address += PAGE_SIZE;
-+ }
-+ }
-+
-+ /*
-+ * setup zones
-+ */
-+
-+ current->mm = NULL;
-+
-+ /* clear zones */
-+ for (zone = 0; zone < MAX_NR_ZONES; zone++)
-+ zones_size[zone] = 0x0;
-+
-+ zones_size[ZONE_DMA] = CONFIG_DMA_SIZE >> PAGE_SHIFT;
-+ zones_size[ZONE_NORMAL] = (((unsigned long)high_memory -
-+ PAGE_OFFSET) >> PAGE_SHIFT) -
-+ zones_size[ZONE_DMA];
-+
-+ free_area_init(zones_size);
-+}
-+/*
-+ * Handle a missed TLB
-+ */
-+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
-+{
-+ struct mm_struct *mm;
-+ pgd_t *pgd;
-+ pmd_t *pmd;
-+ pte_t *pte;
-+ unsigned long mmuar;
-+ int asid;
-+ unsigned long flags;
-+
-+ local_save_flags(flags);
-+ local_irq_disable();
-+
-+ mmuar = (dtlb) ? regs->mmuar
-+ : regs->pc + (extension_word * sizeof(long));
-+
-+ mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm;
-+
-+ if (!mm) {
-+ local_irq_restore(flags);
-+ return -1;
-+ }
-+
-+ pgd = pgd_offset(mm, mmuar);
-+ if (pgd_none(*pgd)) {
-+ local_irq_restore(flags);
-+ return -1;
-+ }
-+
-+ pmd = pmd_offset(pgd, mmuar);
-+ if (pmd_none(*pmd)) {
-+ local_irq_restore(flags);
-+ return -1;
-+ }
-+
-+ pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar)
-+ : pte_offset_map(pmd, mmuar);
-+ if (pte_none(*pte) || !pte_present(*pte)) {
-+ local_irq_restore(flags);
-+ return -1;
-+ }
-+
-+ if (write) {
-+ if (!pte_write(*pte)) {
-+ local_irq_restore(flags);
-+ return -1;
-+ }
-+ set_pte(pte, pte_mkdirty(*pte));
-+ }
-+
-+ set_pte(pte, pte_mkyoung(*pte));
-+ asid = cpu_context(mm) & 0xff;
-+ if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
-+ set_pte(pte, pte_wrprotect(*pte));
-+
-+ *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
-+ | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
-+ >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V;
-+
-+ *MMUDR = (pte_val(*pte) & PAGE_MASK)
-+ | ((pte->pte) & CF_PAGE_MMUDR_MASK)
-+ | MMUDR_SZ8K | MMUDR_X;
-+
-+ if (dtlb)
-+ *MMUOR = MMUOR_ACC | MMUOR_UAA;
-+ else
-+ *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA;
-+
-+ asm("nop");
-+
-+#ifdef DEBUG
-+ printk(KERN_INFO "cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK),
-+ (pte_val(*pte) & PAGE_MASK));
-+#endif
-+ local_irq_restore(flags);
-+ return 0;
-+}
-+
-+
-+/*
-+ * Context Management
-+ *
-+ * Based on arch/ppc/mmu_context.c
-+ */
-+
-+/*
-+ * Initialize the context management system.
-+ */
-+void __init mmu_context_init(void)
-+{
-+ /*
-+ * Some processors have too few contexts to reserve one for
-+ * init_mm, and require using context 0 for a normal task.
-+ * Other processors reserve the use of context zero for the kernel.
-+ * This code assumes FIRST_CONTEXT < 32.
-+ */
-+ context_map[0] = (1 << FIRST_CONTEXT) - 1;
-+ next_mmu_context = FIRST_CONTEXT;
-+ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-+}
-+
-+/*
-+ * Steal a context from a task that has one at the moment.
-+ * This is only used on 8xx and 4xx and we presently assume that
-+ * they don't do SMP. If they do then thicfpgalloc.hs will have to check
-+ * whether the MM we steal is in use.
-+ * We also assume that this is only used on systems that don't
-+ * use an MMU hash table - this is true for 8xx and 4xx.
-+ * This isn't an LRU system, it just frees up each context in
-+ * turn (sort-of pseudo-random replacement :). This would be the
-+ * place to implement an LRU scheme if anyone was motivated to do it.
-+ * -- paulus
-+ */
-+void steal_context(void)
-+{
-+ struct mm_struct *mm;
-+ /* free up context `next_mmu_context' */
-+ /* if we shouldn't free context 0, don't... */
-+ if (next_mmu_context < FIRST_CONTEXT)
-+ next_mmu_context = FIRST_CONTEXT;
-+ mm = context_mm[next_mmu_context];
-+ flush_tlb_mm(mm);
-+ destroy_context(mm);
-+}
---- /dev/null
-+++ b/arch/m68k/mm/cf-sram.c
-@@ -0,0 +1,80 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Lanttor.Guo@freescale.com
-+ *
-+ * Providing on-chip SRAM allocation and free APIs to kernel
-+ * The implemention uses gen_pool_alloc/gen_pool_free interface
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/genalloc.h>
-+
-+/* sram memory min allocation size per once */
-+static long blk_size = CONFIG_SRAM_ALLOC_GRANULARITY;
-+static struct gen_pool *sram_pool;
-+
-+/*
-+ * Set up memory pools to manage on-chip sram.
-+ * @ start the start address of SRAM
-+ * @ size the size of SRAM
-+ * return return 0 express success
-+ */
-+int declare_sram_pool(void *start, size_t size)
-+{
-+ int status = 0;
-+
-+ pr_debug("%s %p %d\n", __func__, start, size);
-+
-+ sram_pool = gen_pool_create(ilog2(blk_size), -1);
-+ if (!sram_pool) {
-+ printk(KERN_ERR "gen_pool_creat faile at %s()\n", __func__);
-+ status = -ENOMEM;
-+ }
-+
-+ status = gen_pool_add(sram_pool, (unsigned long)start, size, -1);
-+ if (status < 0)
-+ printk(KERN_ERR "gen_pool_add failed at %s()\n", __func__);
-+
-+ return status;
-+
-+}
-+
-+/*
-+ * Allocate memory from sram pool
-+ * @ len the size of allocated memory
-+ * return return the start addr of allocated memory
-+ */
-+void *sram_alloc(size_t len)
-+{
-+ unsigned long vaddr;
-+
-+ if (!len) {
-+ printk(KERN_ERR "the len parameter of sram_alloc() is zero\n");
-+ return NULL;
-+ }
-+
-+ vaddr = gen_pool_alloc(sram_pool, len);
-+ if (!vaddr)
-+ return NULL;
-+
-+ return (void *)vaddr;
-+}
-+EXPORT_SYMBOL(sram_alloc);
-+
-+/*
-+ * Free memory to sram pool
-+ * @ addr the addr of allocated memory
-+ * @ len the size of allocated memory
-+ */
-+void sram_free(void *addr, size_t len)
-+{
-+ gen_pool_free(sram_pool, (unsigned long)addr, len);
-+}
-+EXPORT_SYMBOL(sram_free);
---- a/arch/m68k/mm/hwtest.c
-+++ b/arch/m68k/mm/hwtest.c
-@@ -12,6 +12,14 @@
- * them here complete with the comments from the original atari
- * config.c...
- * -- PMM <pmaydell@chiark.greenend.org.uk>, 05/1998
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
-
- /* This function tests for the presence of an address, specially a
-@@ -25,6 +33,7 @@
-
- #include <linux/module.h>
-
-+#ifndef CONFIG_COLDFIRE
- int hwreg_present( volatile void *regp )
- {
- int ret = 0;
-@@ -82,4 +91,5 @@ int hwreg_write( volatile void *regp, un
- return( ret );
- }
- EXPORT_SYMBOL(hwreg_write);
-+#endif
-
---- a/arch/m68k/mm/init.c
-+++ b/arch/m68k/mm/init.c
-@@ -2,6 +2,13 @@
- * linux/arch/m68k/mm/init.c
- *
- * Copyright (C) 1995 Hamish Macdonald
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- *
- * Contains common initialization routines, specific init code moved
- * to motorola.c and sun3mmu.c
-@@ -32,6 +39,7 @@
- #include <asm/sections.h>
- #include <asm/tlb.h>
-
-+
- DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
- pg_data_t pg_data_map[MAX_NUMNODES];
-@@ -113,7 +121,7 @@ void __init mem_init(void)
- }
- }
-
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- /* insert pointer tables allocated so far into the tablelist */
- init_pointer_table((unsigned long)kernel_pg_dir);
- for (i = 0; i < PTRS_PER_PGD; i++) {
-@@ -132,6 +140,11 @@ void __init mem_init(void)
- codepages << (PAGE_SHIFT-10),
- datapages << (PAGE_SHIFT-10),
- initpages << (PAGE_SHIFT-10));
-+
-+#ifdef CONFIG_VDSO
-+ /* init the vdso page */
-+ vdso_init();
-+#endif
- }
-
- #ifdef CONFIG_BLK_DEV_INITRD
---- a/arch/m68k/mm/kmap.c
-+++ b/arch/m68k/mm/kmap.c
-@@ -2,6 +2,13 @@
- * linux/arch/m68k/mm/kmap.c
- *
- * Copyright (C) 1997 Roman Hodek
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- *
- * 10/01/99 cleaned up the code and changing to the same interface
- * used by other architectures /Roman Zippel
-@@ -24,7 +31,11 @@
-
- #undef DEBUG
-
-+#ifndef CONFIG_COLDFIRE
- #define PTRTREESIZE (256*1024)
-+#else
-+#define PTRTREESIZE PAGE_SIZE
-+#endif
-
- /*
- * For 040/060 we can use the virtual memory area like other architectures,
-@@ -50,7 +61,11 @@ static inline void free_io_area(void *ad
-
- #else
-
-+#ifdef CONFIG_COLDFIRE
-+#define IO_SIZE PAGE_SIZE
-+#else
- #define IO_SIZE (256*1024)
-+#endif
-
- static struct vm_struct *iolist;
-
-@@ -126,8 +141,58 @@ void __iomem *__ioremap(unsigned long ph
- }
- #endif
-
-+#ifdef CONFIG_M5445X
-+ if (physaddr >= 0xf0000000) {
-+ /*
-+ * On the M5445x processors an ACR is setup to map
-+ * the 0xF0000000 range into kernel memory as
-+ * non-cacheable.
-+ */
-+ return (void __iomem *)physaddr;
-+ }
-+ if ((physaddr >= KMAP_START) && (physaddr <= KMAP_END)) {
-+ /* if physaddr belongs to virtual address range for ioremap,
-+ * then return physaddr because it has been ioremapped
-+ */
-+ return (void __iomem *)physaddr;
-+ }
-+#endif
-+#ifdef CONFIG_M547X_8X
-+ if (physaddr >= 0xf0000000) {
-+ /*
-+ * On the M547x/M548x processors an ACR is setup to map
-+ * the 0xF0000000 range into kernel memory as
-+ * non-cacheable.
-+ */
-+ return (void __iomem *)physaddr;
-+ }
-+
-+ if ((physaddr >= 0xd0000000) && (physaddr + size < 0xd800ffff)) {
-+ printk(KERN_ERR "ioremap:PCI 0x%lx,0x%lx(%d)"
-+ " - PCI area hit\n", physaddr, size, cacheflag);
-+ return (void *)physaddr;
-+ }
-+#endif
-+#ifdef CONFIG_M5441X
-+ if (physaddr >= 0xe0000000) {
-+ /*
-+ * On the M5441x processors an ACR is setup to map
-+ * the 0xe0000000 range into kernel memory as
-+ * non-cacheable.
-+ */
-+ return (void __iomem *)physaddr;
-+ }
-+ if ((physaddr >= KMAP_START) && (physaddr <= KMAP_END)) {
-+ /* if physaddr belongs to virtual address range for ioremap,
-+ * then return physaddr because it has been ioremapped
-+ */
-+ return (void __iomem *)physaddr;
-+ }
-+#endif
-+
- #ifdef DEBUG
-- printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag);
-+ printk(KERN_ERR "ioremap: paddr=0x%lx,size=0x%lx(%d) - ",
-+ physaddr, size, cacheflag);
- #endif
- /*
- * Mappings have to be aligned
-@@ -146,7 +211,8 @@ void __iomem *__ioremap(unsigned long ph
- virtaddr = (unsigned long)area->addr;
- retaddr = virtaddr + offset;
- #ifdef DEBUG
-- printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr);
-+ printk(KERN_ERR " paddr=0x%lx,vaddr=0x%lx,retaddr=0x%lx",
-+ physaddr, virtaddr, retaddr);
- #endif
-
- /*
-@@ -171,7 +237,12 @@ void __iomem *__ioremap(unsigned long ph
- break;
- }
- } else {
-+#ifndef CONFIG_COLDFIRE
- physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY);
-+#else
-+ physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \
-+ _PAGE_READWRITE);
-+#endif
- switch (cacheflag) {
- case IOMAP_NOCACHE_SER:
- case IOMAP_NOCACHE_NONSER:
-@@ -251,6 +322,13 @@ void __iounmap(void *addr, unsigned long
- pmd_t *pmd_dir;
- pte_t *pte_dir;
-
-+#ifdef CONFIG_M547X_8X
-+ if ((addr >= (void *)0xd0000000)
-+ && (addr + size < (void *)0xd800ffff)) {
-+ printk(KERN_ERR "%s: PCI address\n", __func__);
-+ return;
-+ }
-+#endif
- while ((long)size > 0) {
- pgd_dir = pgd_offset_k(virtaddr);
- if (pgd_bad(*pgd_dir)) {
---- a/arch/m68k/mm/memory.c
-+++ b/arch/m68k/mm/memory.c
-@@ -2,6 +2,13 @@
- * linux/arch/m68k/mm/memory.c
- *
- * Copyright (C) 1995 Hamish Macdonald
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
- */
-
- #include <linux/module.h>
-@@ -127,6 +134,7 @@ int free_pointer_table (pmd_t *ptable)
- return 0;
- }
-
-+#ifndef CONFIG_COLDFIRE
- /* invalidate page in both caches */
- static inline void clear040(unsigned long paddr)
- {
-@@ -173,6 +181,7 @@ static inline void pushcl040(unsigned lo
- clear040(paddr);
- local_irq_restore(flags);
- }
-+#endif /* CONFIG_COLDFIRE */
-
- /*
- * 040: Hit every page containing an address in the range paddr..paddr+len-1.
-@@ -203,6 +212,9 @@ static inline void pushcl040(unsigned lo
-
- void cache_clear (unsigned long paddr, int len)
- {
-+#ifdef CONFIG_COLDFIRE
-+ flush_bcache();
-+#else
- if (CPU_IS_040_OR_060) {
- int tmp;
-
-@@ -237,6 +249,7 @@ void cache_clear (unsigned long paddr, i
- if(mach_l2_flush)
- mach_l2_flush(0);
- #endif
-+#endif /* CONFIG_COLDFIRE */
- }
- EXPORT_SYMBOL(cache_clear);
-
-@@ -250,6 +263,9 @@ EXPORT_SYMBOL(cache_clear);
-
- void cache_push (unsigned long paddr, int len)
- {
-+#ifdef CONFIG_COLDFIRE
-+ flush_bcache();
-+#else
- if (CPU_IS_040_OR_060) {
- int tmp = PAGE_SIZE;
-
-@@ -290,6 +306,7 @@ void cache_push (unsigned long paddr, in
- if(mach_l2_flush)
- mach_l2_flush(1);
- #endif
-+#endif /* CONFIG_COLDFIRE */
- }
- EXPORT_SYMBOL(cache_push);
-
---- a/fs/namespace.c
-+++ b/fs/namespace.c
-@@ -3,6 +3,10 @@
- *
- * (C) Copyright Al Viro 2000, 2001
- * Released under GPL v2.
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Change to align on page size for coldfire
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
- *
- * Based on code from fs/super.c, copyright Linus Torvalds and others.
- * Heavily rewritten.
-@@ -2161,7 +2165,11 @@ int copy_mount_options(const void __user
- /* copy_from_user cannot cross TASK_SIZE ! */
- size = TASK_SIZE - (unsigned long)data;
- if (size > PAGE_SIZE)
-+#ifndef CONFIG_COLDFIRE
- size = PAGE_SIZE;
-+#else
-+ size = PAGE_SIZE - ((unsigned long)data & ~PAGE_MASK);
-+#endif
-
- i = size - exact_copy_from_user((void *)page, data, size);
- if (!i) {
---- a/include/linux/fsl_devices.h
-+++ b/include/linux/fsl_devices.h
-@@ -6,7 +6,7 @@
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
-- * Copyright 2004 Freescale Semiconductor, Inc
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
-@@ -18,7 +18,7 @@
- #define _FSL_DEVICE_H_
-
- #include <linux/types.h>
--
-+#include <linux/interrupt.h>
- /*
- * Some conventions on how we handle peripherals on Freescale chips
- *
-@@ -119,4 +119,14 @@ int fsl_deep_sleep(void);
- static inline int fsl_deep_sleep(void) { return 0; }
- #endif
-
-+struct fsl_ata_platform_data {
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ int udma_mask; /* UDMA modes h/w can handle */
-+ int fifo_alarm; /* value for fifo_alarm reg */
-+ int max_sg; /* longest sglist h/w can handle */
-+#endif
-+ int (*init)(struct platform_device *pdev);
-+ void (*exit)(void);
-+ int (*get_clk_rate)(void);
-+};
- #endif /* _FSL_DEVICE_H_ */
diff --git a/target/linux/coldfire/patches/002-MCF54451-and-MCF54455-support-in-Linux-2.6.38.patch b/target/linux/coldfire/patches/002-MCF54451-and-MCF54455-support-in-Linux-2.6.38.patch
deleted file mode 100644
index 82fc1ed..0000000
--- a/target/linux/coldfire/patches/002-MCF54451-and-MCF54455-support-in-Linux-2.6.38.patch
+++ /dev/null
@@ -1,10546 +0,0 @@
-From f46a96f02d74535e928710eaebffe6c8b201b76a Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:37 +0800
-Subject: [PATCH 02/52] MCF54451 and MCF54455 support in Linux 2.6.38
-
-Add MCF54451 and MCF54455 support in Linux 2.6.38.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5445x/Makefile | 20 +
- arch/m68k/coldfire/m5445x/config.c | 599 ++++++++++
- arch/m68k/coldfire/m5445x/devices.c | 527 +++++++++
- arch/m68k/configs/m54451evb_defconfig | 1412 +++++++++++++++++++++++
- arch/m68k/configs/m54455evb_defconfig | 1597 +++++++++++++++++++++++++++
- arch/m68k/include/asm/cf_5445x_cacheflush.h | 534 +++++++++
- arch/m68k/include/asm/mcf5445x_ccm.h | 206 ++++
- arch/m68k/include/asm/mcf5445x_dspi.h | 665 +++++++++++
- arch/m68k/include/asm/mcf5445x_dtim.h | 96 ++
- arch/m68k/include/asm/mcf5445x_edma.h | 1472 ++++++++++++++++++++++++
- arch/m68k/include/asm/mcf5445x_eport.h | 117 ++
- arch/m68k/include/asm/mcf5445x_fbcs.h | 200 ++++
- arch/m68k/include/asm/mcf5445x_gpio.h | 1411 +++++++++++++++++++++++
- arch/m68k/include/asm/mcf5445x_intc.h | 724 ++++++++++++
- arch/m68k/include/asm/mcf5445x_pci.h | 238 ++++
- arch/m68k/include/asm/mcf5445x_pciarb.h | 40 +
- arch/m68k/include/asm/mcf5445x_rtc.h | 114 ++
- arch/m68k/include/asm/mcf5445x_scm.h | 48 +
- arch/m68k/include/asm/mcf5445x_sdramc.h | 142 +++
- arch/m68k/include/asm/mcf5445x_ssi.h | 187 ++++
- arch/m68k/include/asm/mcf5445x_xbs.h | 81 ++
- 21 files changed, 10430 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/coldfire/m5445x/Makefile
- create mode 100644 arch/m68k/coldfire/m5445x/config.c
- create mode 100644 arch/m68k/coldfire/m5445x/devices.c
- create mode 100644 arch/m68k/configs/m54451evb_defconfig
- create mode 100644 arch/m68k/configs/m54455evb_defconfig
- create mode 100644 arch/m68k/include/asm/cf_5445x_cacheflush.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_ccm.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_dspi.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_dtim.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_edma.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_eport.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_fbcs.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_gpio.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_intc.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_pci.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_pciarb.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_rtc.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_scm.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_sdramc.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_ssi.h
- create mode 100644 arch/m68k/include/asm/mcf5445x_xbs.h
-
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/Makefile
-@@ -0,0 +1,20 @@
-+#
-+# Makefile for Linux arch/m68k/coldfire/m5445x source directory
-+#
-+
-+obj-$(CONFIG_M5445X) += devices.o config.o
-+
-+ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_FSL_USB2)),)
-+ obj-y += usb.o
-+endif
-+ifneq ($(strip $(CONFIG_USB_GADGET_FSL_USB2) $(CONFIG_USB_EHCI_HCD)),)
-+ obj-y += usb_dr.o
-+endif
-+ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_FSL_USB2)),)
-+ obj-y += xcvr.o
-+endif
-+
-+obj-$(CONFIG_PCI) += pci.o mcf5445x-pci.o
-+ifneq ($(CONFIG_FEC),)
-+obj-y += fec.o
-+endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/config.c
-@@ -0,0 +1,599 @@
-+/*
-+ * linux/arch/m68k/coldfire/config_m5445x.c
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author:
-+ * Kurt Mahan kmahan@freescale.com
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/console.h>
-+#include <linux/bootmem.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/clockchips.h>
-+#include <linux/delay.h>
-+#include <asm/bootinfo.h>
-+#include <asm/machdep.h>
-+#include <asm/coldfire.h>
-+#include <asm/cfcache.h>
-+#include <asm/cacheflush.h>
-+#include <asm/io.h>
-+#include <asm/cfmmu.h>
-+#include <asm/setup.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+#include <asm/movs.h>
-+#include <asm/movs.h>
-+#include <asm/page.h>
-+#include <asm/pgalloc.h>
-+#include <asm/cf-sram.h>
-+
-+#include <asm/mcfsim.h>
-+
-+#define UBOOT_EXTRA_CLOCKS
-+#include <asm/bootinfo.h>
-+
-+#include <asm/mcf5445x_intc.h>
-+#include <asm/mcf5445x_sdramc.h>
-+#include <asm/mcf5445x_fbcs.h>
-+#include <asm/mcf5445x_dtim.h>
-+#include <asm/mcf5445x_xbs.h>
-+
-+extern int get_irq_list(struct seq_file *p, void *v);
-+extern char _text, _end;
-+extern char _etext, _edata, __init_begin, __init_end;
-+extern struct console mcfrs_console;
-+extern char m68k_command_line[CL_SIZE];
-+extern unsigned long availmem;
-+extern unsigned long shadow_cacr;
-+EXPORT_SYMBOL(shadow_cacr);
-+extern struct mem_info m68k_ramdisk;
-+
-+static int irq_enable[NR_IRQS];
-+unsigned long num_pages;
-+
-+/* cf dma physical addresses */
-+unsigned long cf_dma_base;
-+EXPORT_SYMBOL(cf_dma_base);
-+unsigned long cf_dma_end;
-+EXPORT_SYMBOL(cf_dma_end);
-+unsigned long cf_dma_size;
-+EXPORT_SYMBOL(cf_dma_size);
-+
-+/* ethernet mac addresses from uboot */
-+unsigned char uboot_enet0[6];
-+unsigned char uboot_enet1[6];
-+
-+void coldfire_sort_memrec(void)
-+{
-+ int i, j;
-+
-+ /* Sort the m68k_memory records by address */
-+ for (i = 0; i < m68k_num_memory; ++i) {
-+ for (j = i + 1; j < m68k_num_memory; ++j) {
-+ if (m68k_memory[i].addr > m68k_memory[j].addr) {
-+ struct mem_info tmp;
-+ tmp = m68k_memory[i];
-+ m68k_memory[i] = m68k_memory[j];
-+ m68k_memory[j] = tmp;
-+ }
-+ }
-+ }
-+ /* Trim off discontiguous bits */
-+ for (i = 1; i < m68k_num_memory; ++i) {
-+ if ((m68k_memory[i-1].addr + m68k_memory[i-1].size) !=
-+ m68k_memory[i].addr) {
-+ printk(KERN_DEBUG "m68k_parse_bootinfo: "
-+ "addr gap between 0x%lx & 0x%lx\n",
-+ m68k_memory[i-1].addr+m68k_memory[i-1].size,
-+ m68k_memory[i].addr);
-+ m68k_num_memory = i;
-+ break;
-+ }
-+ }
-+}
-+
-+/*
-+ * UBoot Handler
-+ */
-+int __init uboot_commandline(char *bootargs)
-+{
-+ int len = 0, cmd_line_len;
-+ static struct uboot_record uboot_info;
-+ u32 offset = PAGE_OFFSET_RAW - PHYS_OFFSET;
-+
-+ extern unsigned long uboot_info_stk;
-+
-+ /* validate address */
-+ if ((uboot_info_stk < PAGE_OFFSET_RAW) ||
-+ (uboot_info_stk >= (PAGE_OFFSET_RAW + CONFIG_SDRAM_SIZE)))
-+ return 0;
-+
-+ /* Add offset to get post-remapped kernel memory location */
-+ uboot_info.bdi = (struct bd_info *)
-+ ((*(u32 *)(uboot_info_stk)) + offset);
-+ uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + offset;
-+ uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + offset;
-+ uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset;
-+ uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset;
-+
-+#if defined(CONFIG_BLK_DEV_INITRD)
-+ m68k_ramdisk.addr = uboot_info.initrd_start;
-+ m68k_ramdisk.size = (uboot_info.initrd_end - uboot_info.initrd_start) ?
-+ (uboot_info.initrd_end - uboot_info.initrd_start + 1) : 0;
-+#endif
-+
-+ /* copy over mac addresses */
-+ memcpy(uboot_enet0, uboot_info.bdi->bi_enet0addr, 6);
-+ memcpy(uboot_enet1, uboot_info.bdi->bi_enet1addr, 6);
-+
-+ /* copy command line */
-+ cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start;
-+ if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1))
-+ len = (int)strncpy(bootargs, (char *)uboot_info.cmd_line_start,\
-+ cmd_line_len);
-+
-+ return len;
-+}
-+
-+#if defined(CONFIG_M54451)
-+#define DEFAULT_COMMAND_LINE \
-+ "debug root=/dev/nfs rw \
-+ nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ \
-+ ip=172.27.155.51:172.27.155.1"
-+#elif defined(CONFIG_M54455)
-+#define MTD_DEFAULT_COMMAND_LINE \
-+ "root=/dev/mtdblock1 rw rootfstype=jffs2 \
-+ ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
-+#define DEFAULT_COMMAND_LINE \
-+ "debug root=/dev/nfs rw \
-+ nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ \
-+ ip=172.27.155.55:172.27.155.1"
-+#endif
-+
-+
-+/*
-+ * Early Coldfire Initialization.
-+ */
-+asmlinkage void __init cf_early_init(void)
-+{
-+ SET_VBR((void *)MCF_RAMBAR1);
-+
-+ /* Mask all interrupts */
-+ MCF_INTC0_IMRL = 0xFFFFFFFF;
-+ MCF_INTC0_IMRH = 0xFFFFFFFF;
-+ MCF_INTC1_IMRL = 0xFFFFFFFF;
-+ MCF_INTC1_IMRH = 0xFFFFFFFF;
-+
-+#if defined(CONFIG_NOR_FLASH_BASE)
-+ MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE;
-+#else
-+ MCF_FBCS_CSAR(1) = 0x00000000;
-+#endif
-+
-+#if CONFIG_SDRAM_SIZE > (256*1024*1024)
-+ /* Init optional SDRAM chip select */
-+ MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B;
-+#endif
-+
-+ MCF_XBS_CRS2 = 0x100;
-+ /* Setup SDRAM crossbar(XBS) priorities */
-+ MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) | /*CPU*/
-+ MCF_XBS_PRS_M1(MCF_XBS_PRI_3) | /*eDMA*/
-+ MCF_XBS_PRS_M2(MCF_XBS_PRI_1) | /*FEC0*/
-+ MCF_XBS_PRS_M3(MCF_XBS_PRI_5) | /*FEC1*/
-+ MCF_XBS_PRS_M5(MCF_XBS_PRI_6) | /*PCI*/
-+ MCF_XBS_PRS_M6(MCF_XBS_PRI_4) | /*USB*/
-+ MCF_XBS_PRS_M7(MCF_XBS_PRI_7)); /*SBF*/
-+
-+ m68k_machtype = MACH_CFMMU;
-+ m68k_fputype = FPU_CFV4E;
-+ m68k_mmutype = MMU_CFV4E;
-+ m68k_cputype = CPU_CFV4E;
-+
-+ /* initialize PHYSRAM */
-+ m68k_num_memory = 0;
-+ m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE; /* phys */
-+ m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
-+
-+ if (!uboot_commandline(m68k_command_line)) {
-+#if defined(CONFIG_BOOTPARAM)
-+ strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
-+#else
-+ strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
-+#endif
-+ }
-+
-+ /* Invalidate caches via CACR */
-+ flush_bcache();
-+ cacr_set(CACHE_DISABLE_MODE);
-+
-+ /* Turn on caches via CACR, enable EUSP */
-+ cacr_set(CACHE_INITIAL_MODE);
-+}
-+
-+/* Assembler routines */
-+asmlinkage void buserr(void);
-+asmlinkage void trap(void);
-+asmlinkage void system_call(void);
-+asmlinkage void inthandler(void);
-+
-+void __init coldfire_trap_init(void)
-+{
-+ int i = 0;
-+ e_vector *vectors;
-+
-+ vectors = (e_vector *)MCF_RAMBAR1;
-+ /*
-+ * There is a common trap handler and common interrupt
-+ * handler that handle almost every vector. We treat
-+ * the system call and bus error special, they get their
-+ * own first level handlers.
-+ */
-+ for (i = 3; (i <= 23); i++)
-+ vectors[i] = trap;
-+ for (i = 33; (i <= 63); i++)
-+ vectors[i] = trap;
-+ for (i = 24; (i <= 31); i++)
-+ vectors[i] = inthandler;
-+ for (i = 64; (i < 255); i++)
-+ vectors[i] = inthandler;
-+
-+ vectors[255] = 0;
-+ vectors[2] = buserr;
-+ vectors[32] = system_call;
-+}
-+
-+void settimericr(unsigned int timer, unsigned int level)
-+{
-+ volatile unsigned char *icrp;
-+ unsigned int icr = 0;
-+ unsigned char irq = 0;
-+
-+ if (timer <= 3) {
-+ switch (timer) {
-+ case 0:
-+ irq = 32;
-+ icr = MCFSIM_ICR_TIMER0;
-+ break;
-+ case 1:
-+ irq = 33;
-+ icr = MCFSIM_ICR_TIMER1;
-+ break;
-+ case 2:
-+ irq = 34;
-+ icr = MCFSIM_ICR_TIMER2;
-+ break;
-+ case 3:
-+ irq = 35;
-+ icr = MCFSIM_ICR_TIMER3;
-+ break;
-+ }
-+
-+ icrp = (volatile unsigned char *) (icr);
-+ *icrp = level;
-+ coldfire_enable_irq0(irq);
-+ }
-+}
-+
-+void coldfire_sched_clk_init(void);
-+
-+void coldfire_tick(void)
-+{
-+ /* Reset the ColdFire timer */
-+ __raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM0_DTER);
-+}
-+
-+void __init coldfire_sched_init(irq_handler_t handler)
-+{
-+ unsigned int mcf_timerlevel = 5;
-+ unsigned int mcf_timervector = 64+32;
-+
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM0_DTMR);
-+ __raw_writel(((MCF_BUSCLK / 16) / HZ), MCF_DTIM0_DTRR);
-+ __raw_writew(MCF_DTIM_DTMR_ORRI | MCF_DTIM_DTMR_CLK_DIV16 |
-+ MCF_DTIM_DTMR_FRR | MCF_DTIM_DTMR_RST_EN, \
-+ MCF_DTIM0_DTMR);
-+
-+ request_irq(mcf_timervector, handler, IRQF_DISABLED, \
-+ "timer", (void *)MCF_DTIM0_DTMR);
-+
-+ settimericr(0, mcf_timerlevel);
-+
-+ /* initialize the fast clock */
-+ coldfire_sched_clk_init();
-+}
-+
-+int timerirqpending(int timer)
-+{
-+ unsigned int imr = 0;
-+ unsigned ret = 0;
-+
-+ switch (timer) {
-+ case 1:
-+ imr = 0x1;
-+ break;
-+ case 2:
-+ imr = 0x2;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ ret = getiprh() & imr;
-+ return ret;
-+}
-+
-+unsigned long coldfire_gettimeoffset(void)
-+{
-+ volatile unsigned long trr, tcn, offset;
-+
-+ tcn = __raw_readw(MCF_DTIM0_DTCN);
-+ trr = __raw_readl(MCF_DTIM0_DTRR);
-+ offset = (tcn * (1000000 / HZ)) / trr;
-+
-+ /* Check if we just wrapped the counters and maybe missed a tick */
-+ if ((offset < (1000000 / HZ / 2)) && timerirqpending(1))
-+ offset += 1000000 / HZ;
-+ return offset;
-+}
-+
-+/* sched_clock support */
-+
-+static unsigned long long sched_clk_val;
-+
-+static irqreturn_t coldfire_sched_clk_irq(int irq, void *dev)
-+{
-+ __raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM3_DTER);
-+ sched_clk_val += 0x100000000LL;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Setup DTIM3 as the 5445x sched_clock() implementation. The
-+ * input frequency to the clock is the internal bus clock (MCF_BUSCLK)
-+ * which is the system clock (MCF_CLK) / 2.
-+ *
-+ * On a system running at 266Mhz:
-+ * MCF_CLK = 266Mhz (266000000)
-+ * MCF_BUSCLK = 133Mhz (133000000)
-+ * DTIM3 Tick = 133Mhz (133000000)
-+ * Tick Resolution = 7.5ns (round to 8ns/Tick)
-+ *
-+ * On a system running at 240Mhz:
-+ * MCF_CLK = 240Mhz (240000000)
-+ * MCF_BUSCLK = 120Mhz (120000000)
-+ * DTIM3 Tick = 120Mhz (120000000)
-+ * Tick Resolution = 8.4ns (round to 8ns/Tick)
-+ */
-+void __init coldfire_sched_clk_init(void)
-+{
-+ unsigned int mcf_timerlevel = 5;
-+ unsigned int mcf_timervector = 64+32+3; /* DTIM3 */
-+
-+ printk(KERN_INFO "Initializing DTIM3 for sched_clock\n");
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM3_DTMR);
-+ __raw_writel(0xffffffff, MCF_DTIM3_DTRR);
-+ __raw_writew(MCF_DTIM_DTMR_ORRI | MCF_DTIM_DTMR_CLK_DIV1 | \
-+ MCF_DTIM_DTMR_RST_EN, MCF_DTIM3_DTMR);
-+
-+ sched_clk_val = 0;
-+ request_irq(mcf_timervector, coldfire_sched_clk_irq, IRQF_DISABLED, \
-+ "timer", (void *)MCF_DTIM3_DTMR);
-+
-+ settimericr(3, mcf_timerlevel);
-+}
-+
-+#ifndef CONFIG_GENERIC_CLOCKEVENTS
-+/* get highres timer */
-+unsigned long long sched_clock(void)
-+{
-+ unsigned long long ret = 0;
-+ ret = sched_clk_val | (unsigned long long)(MCF_REG32(MCF_DTIM3_DTCN));
-+ ret = ret << 3;
-+ return ret;
-+}
-+
-+#else /*CONFIG_GENERIC_CLOCKEVENTS*/
-+
-+static unsigned long long sched_dtim_clk_val;
-+
-+unsigned long long sched_clock(void)
-+{
-+ unsigned long flags;
-+ unsigned long long tcn, cycles;
-+
-+ local_irq_save(flags);
-+ tcn = ((unsigned long long)(MCF_REG32(MCF_DTIM2_DTCN)));
-+ cycles = sched_dtim_clk_val;
-+ local_irq_restore(flags);
-+ return cycles + tcn;
-+}
-+
-+unsigned long long sys_dtim2_read(void)
-+{
-+ unsigned long flags;
-+ unsigned long long tcn, cycles;
-+
-+ local_irq_save(flags);
-+ tcn = ((unsigned long long)(MCF_REG32(MCF_DTIM2_DTCN)));
-+ cycles = sched_dtim_clk_val;
-+ local_irq_restore(flags);
-+
-+ return cycles + tcn;
-+}
-+
-+static irqreturn_t coldfire_dtim_clk_irq(int irq, void *dev)
-+{
-+ struct clock_event_device *evt = (struct clock_event_device *)dev;
-+
-+ __raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM2_DTER);
-+ sched_dtim_clk_val += (MCF_BUSCLK / 16) / HZ;
-+ evt->event_handler(evt);
-+ return IRQ_HANDLED;
-+}
-+
-+void sys_dtim2_init(struct clock_event_device *evt)
-+{
-+ unsigned int mcf_timerlevel = 5;
-+ unsigned int mcf_timervector = 64+32+2; /* DTIM2 */
-+
-+ printk(KERN_INFO "Initializing DTIM2 for sched_clock\n");
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM2_DTMR);
-+ __raw_writel(((MCF_BUSCLK / 16) / HZ)-1, MCF_DTIM2_DTRR);
-+ __raw_writew(MCF_DTIM_DTMR_ORRI | MCF_DTIM_DTMR_CLK_DIV16 |
-+ MCF_DTIM_DTMR_FRR | MCF_DTIM_DTMR_RST_EN, \
-+ MCF_DTIM2_DTMR);
-+
-+ request_irq(mcf_timervector, coldfire_dtim_clk_irq, IRQF_DISABLED, \
-+ "timer2", (void *)evt);
-+
-+ settimericr(3, mcf_timerlevel);
-+ return;
-+}
-+
-+#endif
-+
-+void coldfire_reboot(void)
-+{
-+ /* disable interrupts and do a software reset */
-+ asm("movew #0x2700, %%sr\n\t"
-+ "moveb #0x40, %%d0\n\t"
-+ "moveb %%d0, 0xfc0a0000\n\t"
-+ : : : "%d0");
-+
-+ mdelay(10);
-+
-+ asm("moveb #0xc0, %%d0\n\t"
-+ "moveb %%d0, 0xfc0a0000\n\t"
-+ : : : "%d0");
-+}
-+
-+static void coldfire_get_model(char *model)
-+{
-+ sprintf(model, "Version 4 ColdFire");
-+}
-+
-+/*
-+ * Setup the nodes and the boot memory.
-+ *
-+ * memory_start and memory_end are VIRTUAL addresses
-+ */
-+static void __init
-+coldfire_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
-+{
-+ unsigned long base_pfn;
-+
-+ /* compute total pages in system */
-+ num_pages = PAGE_ALIGN(memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
-+
-+ /* align start/end to page boundries */
-+ memory_start = PAGE_ALIGN(memory_start);
-+ memory_end = memory_end & PAGE_MASK;
-+
-+ /* page numbers */
-+ base_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
-+ min_low_pfn = __pa(memory_start) >> PAGE_SHIFT;
-+ max_low_pfn = __pa(memory_end) >> PAGE_SHIFT;
-+
-+ high_memory = (void *)memory_end;
-+ availmem = memory_start;
-+
-+ /* setup bootmem data */
-+ m68k_setup_node(0);
-+ availmem += init_bootmem_node(NODE_DATA(0), min_low_pfn,
-+ base_pfn, max_low_pfn);
-+ availmem = PAGE_ALIGN(availmem);
-+
-+ printk(KERN_INFO "** availmem=0x%lx pa(am)=0x%lx\n",
-+ availmem, __pa(availmem));
-+ printk(KERN_INFO "** mstart=0x%lx mend=0x%lx\n",
-+ memory_start, memory_end);
-+ printk(KERN_INFO "bpfn=0x%lx minpfn=0x%lx maxpfn=0x%lx\n",
-+ base_pfn, min_low_pfn, max_low_pfn);
-+
-+ /* turn over physram */
-+ free_bootmem(__pa(availmem), memory_end - availmem);
-+
-+ /* configure physical dma area */
-+ cf_dma_base = __pa(PAGE_ALIGN(memory_start));
-+ cf_dma_size = CONFIG_DMA_SIZE;
-+ cf_dma_end = CONFIG_SDRAM_BASE + cf_dma_size - 1;
-+
-+ printk(KERN_INFO "dma: phys base=0x%lx phys end=0x%lx virt base=0x%x\n",
-+ cf_dma_base, cf_dma_end, CONFIG_DMA_BASE);
-+
-+ printk(KERN_INFO "mdma=0x%x pa(mdma)=0x%lx\n",
-+ MAX_DMA_ADDRESS, __pa(MAX_DMA_ADDRESS));
-+}
-+
-+/*
-+ * Architecture setup for Coldfire
-+ */
-+void __init config_coldfire(void)
-+{
-+ unsigned long endmem, startmem;
-+
-+ /*
-+ * Calculate endmem from m68k_memory[0] assuming that a single
-+ * chunk of ram is being configured.
-+ */
-+ startmem = ((((int) &_end) + (PAGE_SIZE - 1)) & PAGE_MASK);
-+ endmem = PAGE_OFFSET + m68k_memory[0].size;
-+
-+ /* set virt to node shift to be the high nibble byte */
-+ m68k_virt_to_node_shift = 28;
-+
-+ printk(KERN_INFO "starting up linux startmem 0x%lx, endmem 0x%lx, \
-+ size %luMB\n", startmem, endmem, (endmem - startmem) >> 20);
-+
-+ memset(irq_enable, 0, sizeof(irq_enable));
-+
-+ /*
-+ * Setup coldfire mach-specific handlers
-+ */
-+ mach_max_dma_address = 0xffffffff;
-+ mach_sched_init = coldfire_sched_init;
-+ mach_tick = coldfire_tick;
-+ mach_gettimeoffset = coldfire_gettimeoffset;
-+ mach_reset = coldfire_reboot;
-+ mach_get_model = coldfire_get_model;
-+
-+ coldfire_bootmem_alloc(startmem, endmem-1);
-+
-+#if defined(CONFIG_DUMMY_CONSOLE) || defined(CONFIG_FRAMEBUFFER_CONSOLE)
-+ conswitchp = &dummy_con;
-+#endif
-+
-+#if defined(CONFIG_SERIAL_COLDFIRE)
-+ /*
-+ * This causes trouble when it is re-registered later.
-+ * Currently this is fixed by conditionally commenting
-+ * out the register_console in mcf_serial.c
-+ */
-+/*JKM -- moved earlier*/
-+ register_console(&mcfrs_console);
-+#endif
-+}
-+
-+#ifdef CONFIG_SRAM
-+static int __init setup_sram_pool(void)
-+{
-+ declare_sram_pool((void *)CONFIG_SRAM_BASE, CONFIG_SRAM_SIZE);
-+ return 0;
-+}
-+postcore_initcall(setup_sram_pool);
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/devices.c
-@@ -0,0 +1,527 @@
-+/*
-+ * arch/m68k/coldfire/mcf5445x-devices.c
-+ *
-+ * Coldfire M5445x Platform Device Configuration
-+ *
-+ * Based on the Freescale MXC devices.c
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/spi/spi.h>
-+
-+#include <linux/interrupt.h>
-+#include <linux/init.h>
-+#ifdef CONFIG_MMC_SPI
-+#include <linux/mmc/host.h>
-+#include <linux/spi/mmc_spi.h>
-+#endif
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfuart.h>
-+#include <asm/mcfqspi.h>
-+#include <asm/mcfdspi.h>
-+#include <asm/cf_io.h>
-+
-+/* ATA Interrupt */
-+#define IRQ_ATA (64 + 64 + 54)
-+
-+/* ATA Base */
-+void __iomem *io_ata_map;
-+unsigned long io_ata_mapsize = 16 * 1024 * 1024;
-+#define BASE_IO_ATA ((unsigned int)(io_ata_map))
-+#define BASE_IO_ATA_PHY 0x90000000
-+#define IO_ATA_MAP_OFFSET (BASE_IO_ATA-BASE_IO_ATA_PHY)
-+
-+/* conversion function between virtual address and physical address */
-+unsigned int io_ata_virt2phys(void *x)
-+{
-+ return (unsigned int)x - IO_ATA_MAP_OFFSET;
-+}
-+
-+void *io_ata_phys2virt(unsigned int x)
-+{
-+ return (void *)(x + IO_ATA_MAP_OFFSET);
-+}
-+
-+#define ATA_IER MCF_REG08(BASE_IO_ATA+0x2c) /* int enable reg */
-+#define ATA_ICR MCF_REG08(BASE_IO_ATA+0x30) /* int clear reg */
-+
-+/* DSPI */
-+#define M5445X_DSPI_MCR 0xfc05c000 /* base */
-+
-+#define M5445X_DSPI_IRQ_SOURCE (31)
-+#define M5445X_DSPI_IRQ_VECTOR (64 + M5445X_DSPI_IRQ_SOURCE)
-+
-+#define M5445X_AUDIO_IRQ_SOURCE (49) /* SSI interrupt */
-+#define M5445X_AUDIO_IRQ_VECTOR (128+M5445X_AUDIO_IRQ_SOURCE)
-+#define M5445X_AUDIO_IRQ_LEVEL (4)
-+
-+/* number of supported SPI selects */
-+#define SPI_NUM_CHIPSELECTS 8
-+
-+#define M5445X_SPI_PAR_VAL (MCF_GPIO_PAR_DSPI_SCK | \
-+ MCF_GPIO_PAR_DSPI_SOUT | \
-+ MCF_GPIO_PAR_DSPI_SIN | \
-+ MCF_GPIO_PAR_DSPI_PCS5_PCS5 | \
-+ MCF_GPIO_PAR_DSPI_PCS1_PCS1 | \
-+ MCF_GPIO_PAR_DSPI_PCS0_PCS0)
-+
-+#ifdef CONFIG_SPI
-+/*
-+ * DSPI
-+ */
-+
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+static struct coldfire_dspi_chip spidev_chip_info = {
-+ .bits_per_word = 8,
-+};
-+#endif
-+
-+#if defined(CONFIG_SND_COLDFIRE) || defined(CONFIG_SND_COLDFIRE_MODULE)
-+static struct coldfire_dspi_chip codec_spi_chip_info = {
-+ .mode = SPI_MODE_0,
-+ .bits_per_word = 16,
-+ .void_write_data = 0,
-+ .dbr = 0,
-+ .pbr = 2,
-+ .br = 8,
-+ .pcssck = 1,
-+ .pasc = 1,
-+ .pdt = 1,
-+ .cssck = 0,
-+ .asc = 1,
-+ .dt = 1,
-+};
-+#endif
-+
-+#if defined(CONFIG_MMC_SPI)
-+int mmc_spi_init(struct device *mmc_spi_device,
-+ irqreturn_t mmc_spi_irq_handler(int irq, void *private),
-+ void *irq_privatedata)
-+{
-+#if 0
-+ MCF_GPIO_PAR_IRQ = MCF_GPIO_PAR_IRQ | MCF_GPIO_PAR_IRQ_IRQ4_GPIO;
-+ /* Set trailing edge for PCI interrupts */
-+ MCF_EPORT_EPPAR &= ~MCF_EPORT_EPPAR_EPPA4(3);
-+ MCF_EPORT_EPPAR |= MCF_EPORT_EPPAR_EPPA4_LEVEL;
-+ /* Turn on irq line in eport */
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE4;
-+#endif
-+ MCF_EPORT_EPPAR &= ~MCF_EPORT_EPPAR_EPPA7(3);
-+ MCF_EPORT_EPPAR |= MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+#if defined(CONFIG_M54451_SD_HW_DETECT)
-+ MCF_INTC0_ICR7 = 2;
-+ if (request_irq(64 + 7, mmc_spi_irq_handler,
-+ IRQF_DISABLED, "mmc_spi_irq", irq_privatedata)) {
-+ printk(KERN_INFO "Cannot allocate "
-+ "eport_irq_lines[%d] IRQ\n", 7);
-+ return -EBUSY;
-+ }
-+ printk(KERN_INFO " extern irq7 as sd card detect\n");
-+#endif
-+ return 0;
-+}
-+
-+static struct coldfire_dspi_chip dspi_sd_chip_info = {
-+ .mode = SPI_MODE_0,
-+ .bits_per_word = 8,
-+ .void_write_data = 0xff,
-+ .dbr = 0,
-+ .pbr = 1,
-+ .br = 1,
-+ .pcssck = 2,
-+ .pasc = 2,
-+ .pdt = 2,
-+ .cssck = 5,
-+ .asc = 5,
-+ .dt = 5,
-+};
-+
-+static struct mmc_spi_platform_data mcf54451_mmc_pdata = {
-+ .ocr_mask = MMC_VDD_33_34,
-+ .init = mmc_spi_init,
-+};
-+#endif
-+
-+#if defined(CONFIG_VOIP_FXS) || defined(CONFIG_VOIP_FXS_MODULE)
-+static struct coldfire_dspi_chip fxs_chip_info = {
-+ .mode = SPI_MODE_3,
-+ .bits_per_word = 8,
-+ .void_write_data = 0,
-+ .dbr = 0,
-+ .pbr = 1,
-+ .br = 1,
-+ .pcssck = 0,
-+ .pasc = 0,
-+ .pdt = 0,
-+ .cssck = 0,
-+ .asc = 0,
-+ .dt = 0,
-+};
-+#endif
-+
-+#if defined(CONFIG_VOIP_FXO) || defined(CONFIG_VOIP_FXO_MODULE)
-+static struct coldfire_dspi_chip fxo_chip_info = {
-+ .mode = SPI_MODE_3,
-+ .bits_per_word = 8,
-+ .void_write_data = 0,
-+ .dbr = 0,
-+ .pbr = 1,
-+ .br = 1,
-+ .pcssck = 0,
-+ .pasc = 0,
-+ .pdt = 0,
-+ .cssck = 0,
-+ .asc = 0,
-+ .dt = 0,
-+};
-+#endif
-+
-+static struct spi_board_info spi_board_info[] = {
-+#if defined(CONFIG_SND_COLDFIRE) || defined(CONFIG_SND_COLDFIRE_MODULE)
-+ {
-+ .modalias = "mcf_codec_spi",
-+ .max_speed_hz = 300000,
-+ .bus_num = 1,
-+ .chip_select = 5,
-+ .irq = M5445X_AUDIO_IRQ_VECTOR,
-+ .platform_data = NULL,
-+ .controller_data = &codec_spi_chip_info
-+ },
-+#endif
-+
-+#if defined(CONFIG_VOIP_FXS) || defined(CONFIG_VOIP_FXS_MODULE)
-+ {
-+ .modalias = "spi_fxs",
-+ .max_speed_hz = 10000000, /* max spi clock in HZ */
-+ .bus_num = 1,
-+ .chip_select = 2,
-+ .controller_data = &fxs_chip_info
-+ },
-+#endif
-+
-+#if defined(CONFIG_VOIP_FXO) || defined(CONFIG_VOIP_FXO_MODULE)
-+ {
-+ .modalias = "spi_fxo",
-+ .max_speed_hz = 10000000, /* max spi clock in HZ */
-+ .bus_num = 1,
-+ .chip_select = 3,
-+ .controller_data = &fxo_chip_info
-+ },
-+#endif
-+
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+ {
-+ .modalias = "spidev",
-+ .max_speed_hz = 16000000, /* max clk (SCK) speed in HZ */
-+ .bus_num = 1,
-+ .chip_select = 0, /* CS0 */
-+ .controller_data = &spidev_chip_info,
-+ },
-+#endif
-+
-+#if defined(CONFIG_MMC_SPI)
-+ {
-+ .modalias = "mmc_spi",
-+ .max_speed_hz = 25000000,
-+ .bus_num = 1,
-+ .chip_select = 0,
-+ .platform_data = &mcf54451_mmc_pdata,
-+ .controller_data = &dspi_sd_chip_info,
-+ },
-+#endif
-+};
-+
-+
-+static struct coldfire_spi_master coldfire_master_info = {
-+ .bus_num = 1,
-+ .num_chipselect = SPI_NUM_CHIPSELECTS,
-+ .irq_list = 0, /* not used */
-+ .irq_source = M5445X_DSPI_IRQ_SOURCE,
-+ .irq_vector = M5445X_DSPI_IRQ_VECTOR,
-+ .irq_mask = (1 << M5445X_DSPI_IRQ_SOURCE),
-+ .irq_lp = 0x2, /* irq level */
-+ .par_val = M5445X_SPI_PAR_VAL,
-+ .cs_control = NULL,
-+};
-+
-+static struct resource coldfire_spi_resources[] = {
-+ [0] = {
-+ .name = "spi-par",
-+ .start = (u32)&MCF_GPIO_PAR_DSPI, /* PAR_DSPI */
-+ .end = (u32)&MCF_GPIO_PAR_DSPI, /* PAR_DSPI */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [1] = {
-+ .name = "spi-module",
-+ .start = M5445X_DSPI_MCR, /* DSPI MCR Base */
-+ .end = M5445X_DSPI_MCR + 0xc0, /* DSPI mem map end */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [2] = {
-+ .name = "spi-int-level",
-+ .start = (u32)&MCF_INTC0_ICR31, /* ICR start */
-+ .end = (u32)&MCF_INTC0_ICR31, /* ICR end */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [3] = {
-+ .name = "spi-int-mask",
-+ .start = (u32)&MCF_INTC0_IMRL, /* IMRL */
-+ .end = (u32)&MCF_INTC0_IMRL, /* IMRL */
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct platform_device coldfire_spi = {
-+ .name = "spi_coldfire",
-+ .id = -1,
-+ .resource = coldfire_spi_resources,
-+ .num_resources = ARRAY_SIZE(coldfire_spi_resources),
-+ .dev = {
-+ .platform_data = &coldfire_master_info,
-+ }
-+};
-+
-+/**
-+ * m5445x_spi_init - Initialize SPI
-+ */
-+static int __init m5445x_spi_init(void)
-+{
-+ int retval;
-+
-+ /* register device */
-+ retval = platform_device_register(&coldfire_spi);
-+ if (retval < 0)
-+ goto out;
-+
-+ /* register board info */
-+ if (ARRAY_SIZE(spi_board_info))
-+ retval = spi_register_board_info(spi_board_info,
-+ ARRAY_SIZE(spi_board_info));
-+
-+out:
-+ return retval;
-+}
-+#endif
-+
-+/*
-+ * On-chip PATA
-+ */
-+#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE)
-+static int ata_init(struct platform_device *pdev)
-+{
-+ /* clear ints */
-+ ATA_IER = 0x00;
-+ ATA_ICR = 0xff;
-+
-+ /* setup shared pins */
-+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & MCF_GPIO_PAR_FEC_FEC1_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC1_ATA;
-+
-+ MCF_GPIO_PAR_FECI2C = (MCF_GPIO_PAR_FECI2C &
-+ (MCF_GPIO_PAR_FECI2C_MDC1_MASK &
-+ MCF_GPIO_PAR_FECI2C_MDIO1_MASK)) |
-+ MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR |
-+ MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW;
-+
-+ MCF_GPIO_PAR_ATA = MCF_GPIO_PAR_ATA_BUFEN |
-+ MCF_GPIO_PAR_ATA_CS1 |
-+ MCF_GPIO_PAR_ATA_CS0 |
-+ MCF_GPIO_PAR_ATA_DA2 |
-+ MCF_GPIO_PAR_ATA_DA1 |
-+ MCF_GPIO_PAR_ATA_DA0 |
-+ MCF_GPIO_PAR_ATA_RESET_RESET |
-+ MCF_GPIO_PAR_ATA_DMARQ_DMARQ |
-+ MCF_GPIO_PAR_ATA_IORDY_IORDY;
-+
-+ MCF_GPIO_PAR_PCI = (MCF_GPIO_PAR_PCI &
-+ (MCF_GPIO_PAR_PCI_GNT3_MASK &
-+ MCF_GPIO_PAR_PCI_REQ3_MASK)) |
-+ MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK |
-+ MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ;
-+
-+ return 0;
-+}
-+
-+static void ata_exit(void)
-+{
-+ printk(KERN_INFO "** ata_exit\n");
-+}
-+
-+static int ata_get_clk_rate(void)
-+{
-+ return MCF_BUSCLK;
-+}
-+
-+
-+static struct fsl_ata_platform_data ata_data = {
-+ .init = ata_init,
-+ .exit = ata_exit,
-+ .get_clk_rate = ata_get_clk_rate,
-+};
-+
-+static struct resource pata_fsl_resources[] = {
-+ [0] = { /* I/O */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [2] = { /* IRQ */
-+ .start = IRQ_ATA,
-+ .end = IRQ_ATA,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device pata_fsl_device = {
-+ .name = "pata_fsl",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(pata_fsl_resources),
-+ .resource = pata_fsl_resources,
-+ .dev = {
-+ .platform_data = &ata_data,
-+ .coherent_dma_mask = ~0, /* $$$ REVISIT */
-+ },
-+};
-+
-+static inline void mcf5445x_init_pata(void)
-+{
-+ io_ata_map = ioremap(BASE_IO_ATA_PHY, io_ata_mapsize);
-+ if (!io_ata_map) {
-+ printk(KERN_ERR "IO ATA map failed by ioremap!\n");
-+ return;
-+ }
-+ printk(KERN_INFO "BASE_IO_ATA value is 0x%x\n", BASE_IO_ATA);
-+
-+ pata_fsl_resources[0].start = BASE_IO_ATA;
-+ pata_fsl_resources[0].end = BASE_IO_ATA + 0x000000d8;
-+
-+ (void)platform_device_register(&pata_fsl_device);
-+}
-+#endif
-+
-+/*
-+ * I2C
-+ */
-+#if defined(CONFIG_I2C)
-+static struct resource coldfire_i2c_resources[] = {
-+ { /* I/O */
-+ .start = 0xFC058000,
-+ .end = 0xFC058010,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ { /* IRQ */
-+ .start = (64 + 30),
-+ .end = (64 + 30),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device coldfire_i2c_device = {
-+ .name = "mcf-i2c",
-+ .id = 0, /*bus number*/
-+ .num_resources = ARRAY_SIZE(coldfire_i2c_resources),
-+ .resource = coldfire_i2c_resources,
-+};
-+
-+static void mcf5445x_init_i2c(void)
-+{
-+ platform_device_register(&coldfire_i2c_device);
-+}
-+#endif
-+
-+static int __init mcf5445x_init_devices(void)
-+{
-+ printk(KERN_INFO "mcf5445x_init_devices: %s.\n", __func__);
-+#ifdef CONFIG_SPI
-+ m5445x_spi_init();
-+#endif
-+
-+#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE)
-+ mcf5445x_init_pata();
-+#endif
-+
-+#if defined(CONFIG_I2C)
-+ mcf5445x_init_i2c();
-+#endif
-+ return 0;
-+}
-+arch_initcall(mcf5445x_init_devices);
-+
-+/***************************************************************************/
-+static struct mcf_platform_uart m5445x_uart_platform[] = {
-+ {
-+ .mapbase = MCFUART_BASE1,
-+ .irq = MCFINT_VECBASE + MCFINT_UART0,
-+ },
-+#ifdef CONFIG_M54455
-+ {
-+ .mapbase = MCFUART_BASE2,
-+ .irq = MCFINT_VECBASE + MCFINT_UART1,
-+ },
-+#endif
-+ { },
-+};
-+
-+static struct platform_device m5445x_uart = {
-+ .name = "mcfuart",
-+ .id = 0,
-+ .dev.platform_data = m5445x_uart_platform,
-+};
-+
-+#if defined(CONFIG_RTC_MCF) || defined(CONFIG_RTC_MCF_MODULE)
-+static struct platform_device rtc_device = {
-+ .name = "mcf-rtc",
-+ .id = -1,
-+};
-+#endif
-+
-+static struct platform_device *m5445x_devices[] __initdata = {
-+ &m5445x_uart,
-+#if defined(CONFIG_RTC_MCF) || defined(CONFIG_RTC_MCF_MODULE)
-+ &rtc_device,
-+#endif
-+};
-+
-+
-+static void m5445x_uart_init_line(int line, int irq)
-+{
-+ if (line == 0)
-+ MCF_GPIO_PAR_UART = (0 | 0x000F);
-+ else if (line == 1)
-+ MCF_GPIO_PAR_UART |= (0 | 0x0FF0);
-+}
-+
-+void m5445x_uarts_init(void)
-+{
-+ const int nrlines = ARRAY_SIZE(m5445x_uart_platform);
-+ int line;
-+
-+ for (line = 0; (line < nrlines); line++)
-+ m5445x_uart_init_line(line, m5445x_uart_platform[line].irq);
-+}
-+/****************************************************************************/
-+/***************************************************************************/
-+
-+static int __init init_BSP(void)
-+{
-+ m5445x_uarts_init();
-+ platform_add_devices(m5445x_devices, ARRAY_SIZE(m5445x_devices));
-+ return 0;
-+}
-+
-+arch_initcall(init_BSP);
-+
-+
---- /dev/null
-+++ b/arch/m68k/configs/m54451evb_defconfig
-@@ -0,0 +1,1412 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.29
-+# Tue Aug 24 16:14:20 2010
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+# CONFIG_TIME_LOW_RES is not set
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+
-+#
-+# RCU Subsystem
-+#
-+CONFIG_CLASSIC_RCU=y
-+# CONFIG_TREE_RCU is not set
-+# CONFIG_PREEMPT_RCU is not set
-+# CONFIG_TREE_RCU_TRACE is not set
-+# CONFIG_PREEMPT_RCU_TRACE is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+# CONFIG_CGROUPS is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_NET_NS is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_FREEZER is not set
-+
-+#
-+# Platform dependent setup
-+#
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+# CONFIG_FPU is not set
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+# CONFIG_SUN3 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+CONFIG_M5445X=y
-+CONFIG_M54451=y
-+# CONFIG_M54455 is not set
-+CONFIG_M54451EVB=y
-+# CONFIG_M54455EVB is not set
-+CONFIG_HAVE_FSL_USB_DR=y
-+# CONFIG_M547X_8X is not set
-+# CONFIG_M5441X is not set
-+CONFIG_MCFCLK=240000000
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x40000000
-+CONFIG_SDRAM_SIZE=0x08000000
-+CONFIG_NOR_FLASH_BASE=0x00000000
-+CONFIG_DMA_BASE=0xef000000
-+CONFIG_DMA_SIZE=0x1000000
-+CONFIG_SRAM=y
-+CONFIG_SRAM_BASE=0x8ff00000
-+CONFIG_SRAM_SIZE=0x8000
-+CONFIG_SRAM_ALLOC_GRANULARITY=0x200
-+CONFIG_VDSO=y
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_UNEVICTABLE_LRU=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_COMPAT_NET_DEV_OPS=y
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+# CONFIG_DCB is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+# CONFIG_PHONET is not set
-+CONFIG_WIRELESS=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_OLD_REGULATORY=y
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_LIB80211 is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_WIMAX is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+# CONFIG_KLIPS is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+CONFIG_FIRMWARE_IN_KERNEL=y
-+CONFIG_EXTRA_FIRMWARE=""
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_TESTS is not set
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+CONFIG_MTD_CFI_ADV_OPTIONS=y
-+CONFIG_MTD_CFI_NOSWAP=y
-+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-+CONFIG_MTD_CFI_GEOMETRY=y
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_OTP is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+CONFIG_MTD_CFI_STAA=y
-+CONFIG_MTD_CFI_UTIL=y
-+CONFIG_MTD_RAM=y
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_COMPAT=y
-+CONFIG_MTD_PHYSMAP_START=0x0
-+CONFIG_MTD_PHYSMAP_LEN=0x01000000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# LPDDR flash memory drivers
-+#
-+# CONFIG_MTD_LPDDR is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_BLK_DEV_HD is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_ICS932S401 is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_C2PORT is not set
-+
-+#
-+# EEPROM support
-+#
-+# CONFIG_EEPROM_AT24 is not set
-+# CONFIG_EEPROM_AT25 is not set
-+# CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_LIBFC is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_DH is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_BROADCOM5222_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_NATIONAL_PHY is not set
-+# CONFIG_NATIONAL8364x_PHY is not set
-+# CONFIG_NATIONAL8384x_PHY is not set
-+CONFIG_MicrelKSZ8041_PHY=y
-+# CONFIG_STE10XP is not set
-+# CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_DNET is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-+# CONFIG_B44 is not set
-+CONFIG_FEC=y
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
-+#
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+CONFIG_USB_PEGASUS=m
-+CONFIG_USB_RTL8150=m
-+CONFIG_USB_USBNET=m
-+CONFIG_USB_NET_AX8817X=m
-+CONFIG_USB_NET_CDCETHER=m
-+# CONFIG_USB_NET_DM9601 is not set
-+# CONFIG_USB_NET_SMSC95XX is not set
-+# CONFIG_USB_NET_GL620A is not set
-+# CONFIG_USB_NET_NET1080 is not set
-+# CONFIG_USB_NET_PLUSB is not set
-+# CONFIG_USB_NET_MCS7830 is not set
-+# CONFIG_USB_NET_RNDIS_HOST is not set
-+# CONFIG_USB_NET_CDC_SUBSET is not set
-+# CONFIG_USB_NET_ZAURUS is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_LIBPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+CONFIG_DEVSRAM=m
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+# CONFIG_SERIAL_COLDFIRE_EDMA is not set
-+CONFIG_SERIAL_MCF=y
-+CONFIG_SERIAL_MCF_BAUDRATE=115200
-+CONFIG_SERIAL_MCF_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_HELPER_AUTO=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_MCF=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+CONFIG_SPI_DSPI=y
-+CONFIG_SPI_COLDFIRE_DSPI_EDMA=y
-+# CONFIG_VOIP_FXS is not set
-+# CONFIG_VOIP_FXO is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_COLDFIRE_WATCHDOG=y
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+# CONFIG_MFD_PCF50633 is not set
-+# CONFIG_REGULATOR is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_SOUND=y
-+CONFIG_SOUND_OSS_CORE=y
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=y
-+CONFIG_SND_PCM=y
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+# CONFIG_SND_MIXER_OSS is not set
-+CONFIG_SND_PCM_OSS=y
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_HRTIMER is not set
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+CONFIG_SND_SUPPORT_OLD_API=y
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+CONFIG_SND_DRIVERS=y
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# ALSA for Coldfire
-+#
-+CONFIG_SND_COLDFIRE=y
-+CONFIG_SND_SPI=y
-+CONFIG_SND_USB=y
-+# CONFIG_SND_USB_AUDIO is not set
-+# CONFIG_SND_USB_CAIAQ is not set
-+# CONFIG_SND_SOC is not set
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_HID_PID is not set
-+# CONFIG_USB_HIDDEV is not set
-+
-+#
-+# Special HID drivers
-+#
-+CONFIG_HID_COMPAT=y
-+# CONFIG_HID_A4TECH is not set
-+# CONFIG_HID_APPLE is not set
-+# CONFIG_HID_BELKIN is not set
-+# CONFIG_HID_CHERRY is not set
-+# CONFIG_HID_CHICONY is not set
-+# CONFIG_HID_CYPRESS is not set
-+# CONFIG_HID_EZKEY is not set
-+# CONFIG_HID_GYRATION is not set
-+# CONFIG_HID_LOGITECH is not set
-+# CONFIG_HID_MICROSOFT is not set
-+# CONFIG_HID_MONTEREY is not set
-+# CONFIG_HID_NTRIG is not set
-+# CONFIG_HID_PANTHERLORD is not set
-+# CONFIG_HID_PETALYNX is not set
-+# CONFIG_HID_SAMSUNG is not set
-+# CONFIG_HID_SONY is not set
-+# CONFIG_HID_SUNPLUS is not set
-+# CONFIG_GREENASIA_FF is not set
-+# CONFIG_HID_TOPSEED is not set
-+# CONFIG_THRUSTMASTER_FF is not set
-+# CONFIG_ZEROPLUS_FF is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+CONFIG_USB_SUSPEND=y
-+CONFIG_USB_OTG=y
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MON is not set
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=m
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-+CONFIG_USB_EHCI_FSL=y
-+# CONFIG_USB_OXU210HP_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+CONFIG_USB_M5445X_ULPI=y
-+# CONFIG_USB_M5445X_FSLS is not set
-+# CONFIG_USB_M5441X_ULPI is not set
-+# CONFIG_USB_M5441X_FSLS is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+#
-+
-+#
-+# see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_VST is not set
-+CONFIG_USB_GADGET=m
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_VBUS_DRAW=2
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+CONFIG_USB_GADGET_FSL_USB2=y
-+CONFIG_USB_FSL_USB2=m
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_IMX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_FSL_QE is not set
-+# CONFIG_USB_GADGET_CI13XXX is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+# CONFIG_USB_ZERO is not set
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+# CONFIG_USB_GADGETFS is not set
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD/SDIO Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+CONFIG_SDIO_UART=y
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD/SDIO Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_SPI=y
-+CONFIG_M54451_SD_HW_DETECT=y
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+# CONFIG_RTC_DRV_RX8581 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_DS1390 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_DS3234 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1286 is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T35 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_MCF=y
-+# CONFIG_RTC_M5441X is not set
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+CONFIG_COLDFIRE_EDMA=y
-+CONFIG_COLDFIRE_EDMA_TEST=m
-+# CONFIG_UIO is not set
-+# CONFIG_STAGING is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_BTRFS_FS is not set
-+CONFIG_DNOTIFY=y
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+CONFIG_ISO9660_FS=y
-+# CONFIG_JOLIET is not set
-+# CONFIG_ZISOFS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+CONFIG_MISC_FILESYSTEMS=y
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_SQUASHFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_REGISTER_V4 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-+
-+#
-+# Tracers
-+#
-+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_SAMPLES is not set
-+# CONFIG_BOOTPARAM is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+# CONFIG_CRYPTO_FIPS is not set
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_AEAD2=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_BLKCIPHER2=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+CONFIG_CRYPTO_TEST=m
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=y
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+CONFIG_CRYPTO_AES=y
-+# CONFIG_CRYPTO_ANUBIS is not set
-+CONFIG_CRYPTO_ARC4=y
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+
-+#
-+# OCF Configuration
-+#
-+
-+#
-+# Talitos Driver
-+#
-+CONFIG_CRYPTO_HW=y
-+CONFIG_CRYPTO_DEV_MCFCAU=y
-+CONFIG_CRYPTO_DEV_MCFCAU_DES=y
-+CONFIG_CRYPTO_DEV_MCFCAU_AES=y
-+CONFIG_CRYPTO_DEV_MCFCAU_MD5=y
-+CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_GENERIC_FIND_LAST_BIT=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+CONFIG_CRC_ITU_T=y
-+CONFIG_CRC32=y
-+CONFIG_CRC7=y
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/configs/m54455evb_defconfig
-@@ -0,0 +1,1597 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.29
-+# Tue Aug 24 16:16:14 2010
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+# CONFIG_TIME_LOW_RES is not set
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+
-+#
-+# RCU Subsystem
-+#
-+CONFIG_CLASSIC_RCU=y
-+# CONFIG_TREE_RCU is not set
-+# CONFIG_PREEMPT_RCU is not set
-+# CONFIG_TREE_RCU_TRACE is not set
-+# CONFIG_PREEMPT_RCU_TRACE is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+# CONFIG_CGROUPS is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_NET_NS is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_PCI_QUIRKS=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_FREEZER is not set
-+
-+#
-+# Platform dependent setup
-+#
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+# CONFIG_FPU is not set
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+CONFIG_PCI=y
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+# CONFIG_SUN3 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+CONFIG_M5445X=y
-+# CONFIG_M54451 is not set
-+CONFIG_M54455=y
-+# CONFIG_M54451EVB is not set
-+CONFIG_M54455EVB=y
-+CONFIG_HAVE_FSL_USB_DR=y
-+# CONFIG_M547X_8X is not set
-+# CONFIG_M5441X is not set
-+CONFIG_MCFCLK=266666666
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x40000000
-+CONFIG_SDRAM_SIZE=0x10000000
-+CONFIG_NOR_FLASH_BASE=0x00000000
-+CONFIG_DMA_BASE=0xef000000
-+CONFIG_DMA_SIZE=0x1000000
-+CONFIG_SRAM=y
-+CONFIG_SRAM_BASE=0x8ff00000
-+CONFIG_SRAM_SIZE=0x8000
-+CONFIG_SRAM_ALLOC_GRANULARITY=0x200
-+CONFIG_VDSO=y
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_UNEVICTABLE_LRU=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+CONFIG_PCI_LEGACY=y
-+# CONFIG_PCI_STUB is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_COMPAT_NET_DEV_OPS=y
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+# CONFIG_DCB is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+# CONFIG_PHONET is not set
-+CONFIG_WIRELESS=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_OLD_REGULATORY=y
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_LIB80211 is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_WIMAX is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+# CONFIG_KLIPS is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+CONFIG_FIRMWARE_IN_KERNEL=y
-+CONFIG_EXTRA_FIRMWARE=""
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_TESTS is not set
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_COMPAT=y
-+CONFIG_MTD_PHYSMAP_START=0x0
-+CONFIG_MTD_PHYSMAP_LEN=0x01000000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-+# CONFIG_MTD_INTEL_VR_NOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# LPDDR flash memory drivers
-+#
-+# CONFIG_MTD_LPDDR is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_BLK_DEV_HD is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_PHANTOM is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+# CONFIG_ICS932S401 is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HP_ILO is not set
-+# CONFIG_C2PORT is not set
-+
-+#
-+# EEPROM support
-+#
-+# CONFIG_EEPROM_AT24 is not set
-+# CONFIG_EEPROM_AT25 is not set
-+# CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+CONFIG_CHR_DEV_SG=y
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_3W_9XXX is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC94XX is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ADVANSYS is not set
-+# CONFIG_SCSI_ARCMSR is not set
-+# CONFIG_MEGARAID_NEWGEN is not set
-+# CONFIG_MEGARAID_LEGACY is not set
-+# CONFIG_MEGARAID_SAS is not set
-+# CONFIG_SCSI_HPTIOP is not set
-+# CONFIG_LIBFC is not set
-+# CONFIG_FCOE is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_IPS is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_MVSAS is not set
-+# CONFIG_SCSI_STEX is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_IPR is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_QLA_FC is not set
-+# CONFIG_SCSI_QLA_ISCSI is not set
-+# CONFIG_SCSI_LPFC is not set
-+# CONFIG_SCSI_DC395x is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_SRP is not set
-+# CONFIG_SCSI_DH is not set
-+CONFIG_ATA=y
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_SATA_PMP=y
-+# CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_SIL24 is not set
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_SVW is not set
-+# CONFIG_ATA_PIIX is not set
-+# CONFIG_SATA_MV is not set
-+# CONFIG_SATA_NV is not set
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_PROMISE is not set
-+# CONFIG_SATA_SX4 is not set
-+# CONFIG_SATA_SIL is not set
-+# CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_ULI is not set
-+# CONFIG_SATA_VIA is not set
-+# CONFIG_SATA_VITESSE is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_PATA_ALI is not set
-+# CONFIG_PATA_AMD is not set
-+# CONFIG_PATA_ARTOP is not set
-+# CONFIG_PATA_ATIIXP is not set
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_CMD64X is not set
-+# CONFIG_PATA_CS5520 is not set
-+# CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CYPRESS is not set
-+# CONFIG_PATA_EFAR is not set
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_HPT366 is not set
-+# CONFIG_PATA_HPT37X is not set
-+# CONFIG_PATA_HPT3X2N is not set
-+# CONFIG_PATA_HPT3X3 is not set
-+# CONFIG_PATA_IT821X is not set
-+# CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_JMICRON is not set
-+# CONFIG_PATA_TRIFLEX is not set
-+# CONFIG_PATA_MARVELL is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_OLDPIIX is not set
-+# CONFIG_PATA_NETCELL is not set
-+# CONFIG_PATA_NINJA32 is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_NS87415 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC_OLD is not set
-+# CONFIG_PATA_RADISYS is not set
-+# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SERVERWORKS is not set
-+# CONFIG_PATA_PDC2027X is not set
-+# CONFIG_PATA_SIL680 is not set
-+# CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_VIA is not set
-+# CONFIG_PATA_WINBOND is not set
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_PATA_SCH is not set
-+CONFIG_PATA_FSL=y
-+CONFIG_FSL_PATA_USE_DMA=y
-+# CONFIG_MD is not set
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# Enable only one of the two stacks, unless you know what you are doing
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+# CONFIG_I2O is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_ARCNET is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_BROADCOM5222_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_NATIONAL_PHY is not set
-+# CONFIG_NATIONAL8364x_PHY is not set
-+CONFIG_NATIONAL8384x_PHY=y
-+# CONFIG_MicrelKSZ8041_PHY is not set
-+# CONFIG_STE10XP is not set
-+# CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_DNET is not set
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-+CONFIG_NET_PCI=y
-+# CONFIG_PCNET32 is not set
-+# CONFIG_AMD8111_ETH is not set
-+# CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_B44 is not set
-+# CONFIG_FORCEDETH is not set
-+CONFIG_E100=y
-+# CONFIG_FEALNX is not set
-+# CONFIG_NATSEMI is not set
-+# CONFIG_NE2K_PCI is not set
-+# CONFIG_8139CP is not set
-+CONFIG_8139TOO=y
-+# CONFIG_8139TOO_PIO is not set
-+# CONFIG_8139TOO_TUNE_TWISTER is not set
-+# CONFIG_8139TOO_8129 is not set
-+# CONFIG_8139_OLD_RX_RESET is not set
-+# CONFIG_R6040 is not set
-+# CONFIG_SIS900 is not set
-+# CONFIG_EPIC100 is not set
-+# CONFIG_SMSC9420 is not set
-+# CONFIG_SUNDANCE is not set
-+# CONFIG_TLAN is not set
-+# CONFIG_VIA_RHINE is not set
-+# CONFIG_SC92031 is not set
-+CONFIG_FEC=y
-+# CONFIG_FEC2 is not set
-+# CONFIG_ATL2 is not set
-+CONFIG_NETDEV_1000=y
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+CONFIG_E1000=y
-+# CONFIG_E1000E is not set
-+# CONFIG_IP1000 is not set
-+# CONFIG_IGB is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_VIA_VELOCITY is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+# CONFIG_ATL1E is not set
-+# CONFIG_ATL1C is not set
-+# CONFIG_JME is not set
-+# CONFIG_NETDEV_10000 is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
-+#
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+CONFIG_USB_RTL8150=y
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_PCIPS2 is not set
-+# CONFIG_SERIO_LIBPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+CONFIG_DEVSRAM=m
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_NOZOMI is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+# CONFIG_SERIAL_COLDFIRE_EDMA is not set
-+CONFIG_SERIAL_MCF=y
-+CONFIG_SERIAL_MCF_BAUDRATE=115200
-+CONFIG_SERIAL_MCF_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_HELPER_AUTO=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# PC SMBus host controller drivers
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_ISCH is not set
-+# CONFIG_I2C_PIIX4 is not set
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_MCF=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Graphics adapter I2C/DDC channel drivers
-+#
-+# CONFIG_I2C_VOODOO3 is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+CONFIG_SPI_DSPI=y
-+CONFIG_SPI_COLDFIRE_DSPI_EDMA=y
-+# CONFIG_VOIP_FXS is not set
-+# CONFIG_VOIP_FXO is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+# CONFIG_ALIM7101_WDT is not set
-+CONFIG_COLDFIRE_WATCHDOG=y
-+
-+#
-+# PCI-based Watchdog Cards
-+#
-+# CONFIG_PCIPCWATCHDOG is not set
-+# CONFIG_WDTPCI is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+# CONFIG_MFD_PCF50633 is not set
-+# CONFIG_REGULATOR is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_SOUND=y
-+CONFIG_SOUND_OSS_CORE=y
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=y
-+CONFIG_SND_PCM=y
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+# CONFIG_SND_MIXER_OSS is not set
-+CONFIG_SND_PCM_OSS=y
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_HRTIMER is not set
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+CONFIG_SND_SUPPORT_OLD_API=y
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+CONFIG_SND_DRIVERS=y
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+CONFIG_SND_PCI=y
-+# CONFIG_SND_AD1889 is not set
-+# CONFIG_SND_ALS300 is not set
-+# CONFIG_SND_ALI5451 is not set
-+# CONFIG_SND_ATIIXP is not set
-+# CONFIG_SND_ATIIXP_MODEM is not set
-+# CONFIG_SND_AU8810 is not set
-+# CONFIG_SND_AU8820 is not set
-+# CONFIG_SND_AU8830 is not set
-+# CONFIG_SND_AW2 is not set
-+# CONFIG_SND_AZT3328 is not set
-+# CONFIG_SND_BT87X is not set
-+# CONFIG_SND_CA0106 is not set
-+# CONFIG_SND_CMIPCI is not set
-+# CONFIG_SND_OXYGEN is not set
-+# CONFIG_SND_CS4281 is not set
-+# CONFIG_SND_CS46XX is not set
-+# CONFIG_SND_DARLA20 is not set
-+# CONFIG_SND_GINA20 is not set
-+# CONFIG_SND_LAYLA20 is not set
-+# CONFIG_SND_DARLA24 is not set
-+# CONFIG_SND_GINA24 is not set
-+# CONFIG_SND_LAYLA24 is not set
-+# CONFIG_SND_MONA is not set
-+# CONFIG_SND_MIA is not set
-+# CONFIG_SND_ECHO3G is not set
-+# CONFIG_SND_INDIGO is not set
-+# CONFIG_SND_INDIGOIO is not set
-+# CONFIG_SND_INDIGODJ is not set
-+# CONFIG_SND_EMU10K1 is not set
-+# CONFIG_SND_EMU10K1X is not set
-+# CONFIG_SND_ENS1370 is not set
-+# CONFIG_SND_ENS1371 is not set
-+# CONFIG_SND_ES1938 is not set
-+# CONFIG_SND_ES1968 is not set
-+# CONFIG_SND_FM801 is not set
-+# CONFIG_SND_HDA_INTEL is not set
-+# CONFIG_SND_HDSP is not set
-+# CONFIG_SND_HDSPM is not set
-+# CONFIG_SND_HIFIER is not set
-+# CONFIG_SND_ICE1712 is not set
-+# CONFIG_SND_ICE1724 is not set
-+# CONFIG_SND_INTEL8X0 is not set
-+# CONFIG_SND_INTEL8X0M is not set
-+# CONFIG_SND_KORG1212 is not set
-+# CONFIG_SND_MAESTRO3 is not set
-+# CONFIG_SND_MIXART is not set
-+# CONFIG_SND_NM256 is not set
-+# CONFIG_SND_PCXHR is not set
-+# CONFIG_SND_RIPTIDE is not set
-+# CONFIG_SND_RME32 is not set
-+# CONFIG_SND_RME96 is not set
-+# CONFIG_SND_RME9652 is not set
-+# CONFIG_SND_SONICVIBES is not set
-+# CONFIG_SND_TRIDENT is not set
-+# CONFIG_SND_VIA82XX is not set
-+# CONFIG_SND_VIA82XX_MODEM is not set
-+# CONFIG_SND_VIRTUOSO is not set
-+# CONFIG_SND_VX222 is not set
-+# CONFIG_SND_YMFPCI is not set
-+
-+#
-+# ALSA for Coldfire
-+#
-+CONFIG_SND_COLDFIRE=y
-+CONFIG_SND_SPI=y
-+CONFIG_SND_USB=y
-+# CONFIG_SND_USB_AUDIO is not set
-+# CONFIG_SND_USB_CAIAQ is not set
-+# CONFIG_SND_SOC is not set
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+CONFIG_HID_DEBUG=y
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_HID_PID is not set
-+# CONFIG_USB_HIDDEV is not set
-+
-+#
-+# Special HID drivers
-+#
-+CONFIG_HID_COMPAT=y
-+# CONFIG_HID_A4TECH is not set
-+# CONFIG_HID_APPLE is not set
-+# CONFIG_HID_BELKIN is not set
-+# CONFIG_HID_CHERRY is not set
-+# CONFIG_HID_CHICONY is not set
-+# CONFIG_HID_CYPRESS is not set
-+# CONFIG_HID_EZKEY is not set
-+# CONFIG_HID_GYRATION is not set
-+# CONFIG_HID_LOGITECH is not set
-+# CONFIG_HID_MICROSOFT is not set
-+# CONFIG_HID_MONTEREY is not set
-+# CONFIG_HID_NTRIG is not set
-+# CONFIG_HID_PANTHERLORD is not set
-+# CONFIG_HID_PETALYNX is not set
-+# CONFIG_HID_SAMSUNG is not set
-+# CONFIG_HID_SONY is not set
-+# CONFIG_HID_SUNPLUS is not set
-+# CONFIG_GREENASIA_FF is not set
-+# CONFIG_HID_TOPSEED is not set
-+# CONFIG_THRUSTMASTER_FF is not set
-+# CONFIG_ZEROPLUS_FF is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+CONFIG_USB_SUSPEND=y
-+CONFIG_USB_OTG=y
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MON is not set
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=m
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-+CONFIG_USB_EHCI_FSL=y
-+# CONFIG_USB_OXU210HP_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_OHCI_HCD is not set
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_WHCI_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+CONFIG_USB_M5445X_ULPI=y
-+# CONFIG_USB_M5445X_FSLS is not set
-+# CONFIG_USB_M5441X_ULPI is not set
-+# CONFIG_USB_M5441X_FSLS is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+#
-+
-+#
-+# see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_VST is not set
-+CONFIG_USB_GADGET=m
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_VBUS_DRAW=2
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+CONFIG_USB_GADGET_FSL_USB2=y
-+CONFIG_USB_FSL_USB2=m
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_IMX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_FSL_QE is not set
-+# CONFIG_USB_GADGET_CI13XXX is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+# CONFIG_USB_ZERO is not set
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+# CONFIG_USB_GADGETFS is not set
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+# CONFIG_UWB is not set
-+# CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_ACCESSIBILITY is not set
-+# CONFIG_INFINIBAND is not set
-+# CONFIG_RTC_CLASS is not set
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+CONFIG_COLDFIRE_EDMA=y
-+CONFIG_COLDFIRE_EDMA_TEST=m
-+# CONFIG_UIO is not set
-+# CONFIG_STAGING is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_BTRFS_FS is not set
-+CONFIG_DNOTIFY=y
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+CONFIG_MISC_FILESYSTEMS=y
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_SQUASHFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_REGISTER_V4 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-+
-+#
-+# Tracers
-+#
-+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_SAMPLES is not set
-+# CONFIG_BOOTPARAM is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+# CONFIG_CRYPTO_FIPS is not set
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_AEAD2=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_BLKCIPHER2=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+CONFIG_CRYPTO_TEST=m
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=y
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+CONFIG_CRYPTO_AES=y
-+# CONFIG_CRYPTO_ANUBIS is not set
-+CONFIG_CRYPTO_ARC4=y
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+
-+#
-+# OCF Configuration
-+#
-+
-+#
-+# Talitos Driver
-+#
-+CONFIG_CRYPTO_HW=y
-+CONFIG_CRYPTO_DEV_MCFCAU=y
-+CONFIG_CRYPTO_DEV_MCFCAU_DES=y
-+CONFIG_CRYPTO_DEV_MCFCAU_AES=y
-+CONFIG_CRYPTO_DEV_MCFCAU_MD5=y
-+CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y
-+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_GENERIC_FIND_LAST_BIT=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_5445x_cacheflush.h
-@@ -0,0 +1,534 @@
-+/*
-+ * include/asm-m68k/cf_5445x_cacheflush.h - Coldfire 5445x Cache
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * Based on include/asm-m68k/cacheflush.h
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef M68K_CF_5445x_CACHEFLUSH_H
-+#define M68K_CF_5445x_CACHEFLUSH_H
-+
-+#include <asm/cfcache.h>
-+
-+/*
-+ * Coldfire Cache Model
-+ *
-+ * The Coldfire processors use a Harvard architecture cache configured
-+ * as four-way set associative. The cache does not implement bus snooping
-+ * so cache coherency with other masters must be maintained in software.
-+ *
-+ * The cache is managed via the CPUSHL instruction in conjunction with
-+ * bits set in the CACR (cache control register). Currently the code
-+ * uses the CPUSHL enhancement which adds the ability to
-+ * invalidate/clear/push a cacheline by physical address. This feature
-+ * is designated in the Hardware Configuration Register [D1-CPES].
-+ *
-+ * CACR Bits:
-+ * DPI[28] cpushl invalidate disable for d-cache
-+ * IDPI[12] cpushl invalidate disable for i-cache
-+ * SPA[14] cpushl search by physical address
-+ * IVO[20] cpushl invalidate only
-+ *
-+ * Random Terminology:
-+ * * invalidate = reset the cache line's valid bit
-+ * * push = generate a line-sized store of the data if its contents are
-+ * marked as modifed (the modified flag is cleared after
-+ * the store)
-+ * * clear = push + invalidate
-+ */
-+
-+/**
-+ * flush_icache - Flush all of the instruction cache
-+ */
-+static inline void flush_icache(void)
-+{
-+ asm volatile("nop\n"
-+ "moveq%.l #0,%%d0\n"
-+ "moveq%.l #0,%%d1\n"
-+ "move%.l %%d0,%%a0\n"
-+ "1:\n"
-+ "cpushl %%ic,(%%a0)\n"
-+ "add%.l #0x0010,%%a0\n"
-+ "addq%.l #1,%%d1\n"
-+ "cmpi%.l %0,%%d1\n"
-+ "bne 1b\n"
-+ "moveq%.l #0,%%d1\n"
-+ "addq%.l #1,%%d0\n"
-+ "move%.l %%d0,%%a0\n"
-+ "cmpi%.l #4,%%d0\n"
-+ "bne 1b\n"
-+ : : "i" (CACHE_SETS)
-+ : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * flush_dcache - Flush all of the data cache
-+ */
-+static inline void flush_dcache(void)
-+{
-+ asm volatile("nop\n"
-+ "moveq%.l #0,%%d0\n"
-+ "moveq%.l #0,%%d1\n"
-+ "move%.l %%d0,%%a0\n"
-+ "1:\n"
-+ "cpushl %%dc,(%%a0)\n"
-+ "add%.l #0x0010,%%a0\n"
-+ "addq%.l #1,%%d1\n"
-+ "cmpi%.l %0,%%d1\n"
-+ "bne 1b\n"
-+ "moveq%.l #0,%%d1\n"
-+ "addq%.l #1,%%d0\n"
-+ "move%.l %%d0,%%a0\n"
-+ "cmpi%.l #4,%%d0\n"
-+ "bne 1b\n"
-+ : : "i" (CACHE_SETS)
-+ : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * flush_bcache - Flush all of both caches
-+ */
-+static inline void flush_bcache(void)
-+{
-+ asm volatile("nop\n"
-+ "moveq%.l #0,%%d0\n"
-+ "moveq%.l #0,%%d1\n"
-+ "move%.l %%d0,%%a0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "add%.l #0x0010,%%a0\n"
-+ "addq%.l #1,%%d1\n"
-+ "cmpi%.l %0,%%d1\n"
-+ "bne 1b\n"
-+ "moveq%.l #0,%%d1\n"
-+ "addq%.l #1,%%d0\n"
-+ "move%.l %%d0,%%a0\n"
-+ "cmpi%.l #4,%%d0\n"
-+ "bne 1b\n"
-+ : : "i" (CACHE_SETS)
-+ : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * cf_cache_clear - invalidate cache
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Invalidate cache lines starting at paddr for len bytes.
-+ * Those lines are not pushed.
-+ */
-+static inline void cf_cache_clear(unsigned long paddr, int len)
-+{
-+ /* number of lines */
-+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+ if (len == 0)
-+ return;
-+
-+ /* align on set boundary */
-+ paddr &= 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%d0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "subq%.l #1,%%d0\n"
-+ "bne%.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : : "a" (paddr), "r" (len),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA+CF_CACR_IVO)
-+ : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_push - Push dirty cache out with no invalidate
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Push the any dirty lines starting at paddr for len bytes.
-+ * Those lines are not invalidated.
-+ */
-+static inline void cf_cache_push(unsigned long paddr, int len)
-+{
-+ /* number of lines */
-+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+ if (len == 0)
-+ return;
-+
-+ /* align on set boundary */
-+ paddr &= 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%d0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "subq%.l #1,%%d0\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : : "a" (paddr), "r" (len),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA+CF_CACR_DPI+CF_CACR_IDPI)
-+ : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_flush - Push dirty cache out and invalidate
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Push the any dirty lines starting at paddr for len bytes and
-+ * invalidate those lines.
-+ */
-+static inline void cf_cache_flush(unsigned long paddr, int len)
-+{
-+ /* number of lines */
-+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+ if (len == 0)
-+ return;
-+
-+ /* align on set boundary */
-+ paddr &= 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%d0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "subq%.l #1,%%d0\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : : "a" (paddr), "r" (len),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA)
-+ : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_flush_range - Push dirty data/inst cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the any dirty data/instr lines starting at paddr for len bytes and
-+ * invalidate those lines.
-+ */
-+static inline void cf_cache_flush_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ int len;
-+
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0;
-+ len = vend - vstart;
-+ if (len == 0)
-+ return;
-+ vstart = __pa(vstart);
-+ vend = vstart + len;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (vstart), "a" (vend),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_dcache_flush_range - Push dirty data cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push/Clear the virtual range *vstart* -> *vend* using the enhanced
-+ * cpushl instruction to search by physical address.
-+ *
-+ * Assumes CACR[IVO] is 0
-+ * CACR[DDPI] is 0
-+ *
-+ * Sets CACR[SPA] to 1 for the duration of this routine
-+ */
-+static inline void cf_dcache_flush_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%dc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (__pa(vstart)), "a" (__pa(vend)),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_dcache_inv_range - Invalidate data cache in range
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Invalidate the virtual range *vstart* -> *vend* using the enhanced
-+ * cpushl instruction to search by physical address.
-+ *
-+ * Assumes CACR[DDPI] is 0
-+ *
-+ * Sets CACR[SPA] and CACR[IVO] to 1 for the duration of this routine
-+ */
-+static inline void cf_dcache_inv_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%dc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (__pa(vstart)), "a" (__pa(vend)),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA | CF_CACR_IVO)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_dcache_push_range - Push data cache in range
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the virtual range *vstart* -> *vend* using the enhanced
-+ * cpushl instruction to search by physical address.
-+ *
-+ * Assumes CACR[IVO] is 0
-+ *
-+ * Sets CACR[SPA] and CACR[DDPI] to 1 for the duration of this routine
-+ */
-+static inline void cf_dcache_push_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%dc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (__pa(vstart)), "a" (__pa(vend)),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA | CF_CACR_DPI)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_icache_flush_range - Push dirty inst cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the any dirty instr lines starting at paddr for len bytes and
-+ * invalidate those lines. This should just be an invalidate since you
-+ * shouldn't be able to have dirty instruction cache.
-+ */
-+static inline void cf_icache_flush_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%ic,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (__pa(vstart)), "a" (__pa(vend)),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * flush_cache_mm - Flush an mm_struct
-+ * @mm: mm_struct to flush
-+ */
-+static inline void flush_cache_mm(struct mm_struct *mm)
-+{
-+ if (mm == current->mm)
-+ flush_bcache();
-+}
-+
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-+
-+/**
-+ * flush_cache_range - Flush a cache range
-+ * @vma: vma struct
-+ * @start: Starting address
-+ * @end: Ending address
-+ *
-+ * flush_cache_range must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_range(struct vm_area_struct *vma,
-+ unsigned long start, unsigned long end)
-+{
-+ if (vma->vm_mm == current->mm)
-+ cf_cache_flush_range(start, end);
-+}
-+
-+/**
-+ * flush_cache_page - Flush a page of the cache
-+ * @vma: vma struct
-+ * @vmaddr:
-+ * @pfn: page numer
-+ *
-+ * flush_cache_page must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_page(struct vm_area_struct *vma,
-+ unsigned long vmaddr, unsigned long pfn)
-+{
-+ if (vma->vm_mm == current->mm)
-+ cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
-+}
-+
-+/**
-+ * __flush_page_to_ram - Push a page out of the cache
-+ * @vaddr: Virtual address at start of page
-+ *
-+ * Push the page at kernel virtual address *vaddr* and clear
-+ * the icache.
-+ */
-+static inline void __flush_page_to_ram(void *vaddr)
-+{
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%d0\n"
-+ "and%.l #0xfffffff0,%%d0\n"
-+ "move%.l %%d0,%%a0\n"
-+ "move%.l %1,%%d0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "subq%.l #1,%%d0\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : : "a" (__pa(vaddr)), "i" (PAGE_SIZE / CACHE_LINE_SIZE),
-+ "r" (shadow_cacr), "i" (CF_CACR_SPA)
-+ : "a0", "d0");
-+}
-+
-+/*
-+ * Various defines for the kernel.
-+ */
-+
-+extern void cache_clear(unsigned long paddr, int len);
-+extern void cache_push(unsigned long paddr, int len);
-+extern void flush_icache_range(unsigned long address, unsigned long endaddr);
-+
-+#define flush_cache_all() flush_bcache()
-+#define flush_cache_vmap(start, end) flush_bcache()
-+#define flush_cache_vunmap(start, end) flush_bcache()
-+
-+#define flush_dcache_range(vstart, vend) \
-+ cf_dcache_flush_range(vstart, vend)
-+#define flush_dcache_page(page) \
-+ __flush_page_to_ram(page_address(page))
-+#define flush_dcache_mmap_lock(mapping) do { } while (0)
-+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-+
-+#define flush_icache_page(vma, page) \
-+ __flush_page_to_ram(page_address(page))
-+
-+/**
-+ * copy_to_user_page - Copy memory to user page
-+ */
-+static inline void copy_to_user_page(struct vm_area_struct *vma,
-+ struct page *page, unsigned long vaddr,
-+ void *dst, void *src, int len)
-+{
-+ memcpy(dst, src, len);
-+ cf_cache_flush(page_to_phys(page), PAGE_SIZE);
-+}
-+
-+/**
-+ * copy_from_user_page - Copy memory from user page
-+ */
-+static inline void copy_from_user_page(struct vm_area_struct *vma,
-+ struct page *page, unsigned long vaddr,
-+ void *dst, void *src, int len)
-+{
-+ cf_cache_flush(page_to_phys(page), PAGE_SIZE);
-+ memcpy(dst, src, len);
-+}
-+
-+#endif /* M68K_CF_5445x_CACHEFLUSH_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_ccm.h
-@@ -0,0 +1,206 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_CCM_H__
-+#define __MCF5445X_CCM_H__
-+
-+/*********************************************************************
-+*
-+* Chip Configuration Module (CCM)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+/* Chip Configuration Register (Read-only) (256 or 360 TEPBGA) */
-+#define MCF_CCM_CCR MCF_REG16(0xFC0A0004)
-+/* Reset Configuration (Read-only) (256 or 360 TEPBGA) */
-+#define MCF_CCM_RCON MCF_REG16(0xFC0A0008)
-+/* Chip Identification Register (Read-only) */
-+#define MCF_CCM_CIR MCF_REG16(0xFC0A000A)
-+/* Miscellaneous Control Register */
-+#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010)
-+#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) /* Clock Divider Register */
-+/* USB On-the-Go Controller Status Register */
-+#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0014)
-+/* Serial Boot Facility Status Register (Read Only) */
-+#define MCF_CCM_SBFSR MCF_REG16(0xFC0A0018)
-+/* Serial Boot Facility Control Register */
-+#define MCF_CCM_SBFCR MCF_REG16(0xFC0A0020)
-+
-+/* Bit definitions and macros for CCR_360 */
-+/* 2-Bit PLL clock mode */
-+#define MCF_CCM_CCR_360_PLLMULT2(x) (((x) & 0x0003))
-+/* PCI pad slew rate mode */
-+#define MCF_CCM_CCR_360_PCISLEW (0x0004)
-+#define MCF_CCM_CCR_360_PCIMODE (0x0008) /* PCI host/agent mode */
-+#define MCF_CCM_CCR_360_PLLMODE (0x0010) /* PLL Mode */
-+/* Flexbus/PCI port size configuration */
-+#define MCF_CCM_CCR_360_FBCONFIG(x) (((x) & 0x0007) << 5)
-+/* 3-Bit PLL Clock Mode */
-+#define MCF_CCM_CCR_360_PLLMULT3(x) (((x) & 0x0007))
-+#define MCF_CCM_CCR_360_OSCMODE (0x0008) /* Oscillator Clock Mode */
-+#define MCF_CCM_CCR_360_FBCONFIG_MASK (0x00E0)
-+#define MCF_CCM_CCR_360_PLLMULT2_MASK (0x0003)
-+#define MCF_CCM_CCR_360_PLLMULT3_MASK (0x0007)
-+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_32 (0x0000)
-+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_8 (0x0020)
-+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_16 (0x0040)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_P_16 (0x0060)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_32 (0x0080)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_8 (0x00A0)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_16 (0x00C0)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_P_8 (0x00E0)
-+#define MCF_CCM_CCR_360_PLLMULT2_12X (0x0000)
-+#define MCF_CCM_CCR_360_PLLMULT2_6X (0x0001)
-+#define MCF_CCM_CCR_360_PLLMULT2_16X (0x0002)
-+#define MCF_CCM_CCR_360_PLLMULT2_8X (0x0003)
-+#define MCF_CCM_CCR_360_PLLMULT3_20X (0x0000)
-+#define MCF_CCM_CCR_360_PLLMULT3_10X (0x0001)
-+#define MCF_CCM_CCR_360_PLLMULT3_24X (0x0002)
-+#define MCF_CCM_CCR_360_PLLMULT3_18X (0x0003)
-+#define MCF_CCM_CCR_360_PLLMULT3_12X (0x0004)
-+#define MCF_CCM_CCR_360_PLLMULT3_6X (0x0005)
-+#define MCF_CCM_CCR_360_PLLMULT3_16X (0x0006)
-+#define MCF_CCM_CCR_360_PLLMULT3_8X (0x0007)
-+
-+/* Bit definitions and macros for CCR_256 */
-+/* 3-Bit PLL clock mode */
-+#define MCF_CCM_CCR_256_PLLMULT3(x) (((x) & 0x0007))
-+/* Oscillator clock mode */
-+#define MCF_CCM_CCR_256_OSCMODE (0x0008)
-+#define MCF_CCM_CCR_256_PLLMODE (0x0010) /* PLL Mode */
-+/* Flexbus/PCI port size configuration */
-+#define MCF_CCM_CCR_256_FBCONFIG(x) (((x) & 0x0007) << 5)
-+#define MCF_CCM_CCR_256_FBCONFIG_MASK (0x00E0)
-+#define MCF_CCM_CCR_256_FBCONFIG_NM_32 (0x0000)
-+#define MCF_CCM_CCR_256_FBCONFIG_NM_8 (0x0020)
-+#define MCF_CCM_CCR_256_FBCONFIG_NM_16 (0x0040)
-+#define MCF_CCM_CCR_256_FBCONFIG_M_32 (0x0080)
-+#define MCF_CCM_CCR_256_FBCONFIG_M_8 (0x00A0)
-+#define MCF_CCM_CCR_256_FBCONFIG_M_16 (0x00C0)
-+#define MCF_CCM_CCR_256_PLLMULT3_MASK (0x0007)
-+#define MCF_CCM_CCR_256_PLLMULT3_20X (0x0000)
-+#define MCF_CCM_CCR_256_PLLMULT3_10X (0x0001)
-+#define MCF_CCM_CCR_256_PLLMULT3_24X (0x0002)
-+#define MCF_CCM_CCR_256_PLLMULT3_18X (0x0003)
-+#define MCF_CCM_CCR_256_PLLMULT3_12X (0x0004)
-+#define MCF_CCM_CCR_256_PLLMULT3_6X (0x0005)
-+#define MCF_CCM_CCR_256_PLLMULT3_16X (0x0006)
-+#define MCF_CCM_CCR_256_PLLMULT3_8X (0x0007)
-+
-+/* Bit definitions and macros for RCON_360 */
-+#define MCF_CCM_RCON_360_PLLMULT(x) (((x)&0x0003)) /* PLL clock mode */
-+#define MCF_CCM_RCON_360_PCISLEW (0x0004) /* PCI pad slew rate mode */
-+#define MCF_CCM_RCON_360_PCIMODE (0x0008) /* PCI host/agent mode */
-+#define MCF_CCM_RCON_360_PLLMODE (0x0010) /* PLL Mode */
-+/* Flexbus/PCI port size configuration */
-+#define MCF_CCM_RCON_360_FBCONFIG(x) (((x) & 0x0007) << 5)
-+
-+/* Bit definitions and macros for RCON_256 */
-+#define MCF_CCM_RCON_256_PLLMULT(x) (((x) & 0x0007)) /* PLL clock mode */
-+#define MCF_CCM_RCON_256_OSCMODE (0x0008) /* Oscillator clock mode */
-+#define MCF_CCM_RCON_256_PLLMODE (0x0010) /* PLL Mode */
-+/* Flexbus/PCI port size configuration */
-+#define MCF_CCM_RCON_256_FBCONFIG(x) (((x) & 0x0007) << 5)
-+
-+/* Bit definitions and macros for CIR */
-+/* Part revision number */
-+#define MCF_CCM_CIR_PRN(x) (((x) & 0x003F))
-+/* Part identification number */
-+#define MCF_CCM_CIR_PIN(x) (((x) & 0x03FF) << 6)
-+#define MCF_CCM_CIR_PIN_MASK (0xFFC0)
-+#define MCF_CCM_CIR_PRN_MASK (0x003F)
-+#define MCF_CCM_CIR_PIN_MCF54450 (0x4F << 6)
-+#define MCF_CCM_CIR_PIN_MCF54451 (0x4D << 6)
-+#define MCF_CCM_CIR_PIN_MCF54452 (0x4B << 6)
-+#define MCF_CCM_CIR_PIN_MCF54453 (0x49 << 6)
-+#define MCF_CCM_CIR_PIN_MCF54454 (0x4A << 6)
-+#define MCF_CCM_CIR_PIN_MCF54455 (0x48 << 6)
-+
-+/* Bit definitions and macros for MISCCR */
-+/* USB clock source */
-+#define MCF_CCM_MISCCR_USBSRC (0x0001)
-+/* USB VBUS over-current sense polarity */
-+#define MCF_CCM_MISCCR_USBOC (0x0002)
-+/* USB transceiver pull-up enable */
-+#define MCF_CCM_MISCCR_USBPUE (0x0004)
-+/* SSI clock source */
-+#define MCF_CCM_MISCCR_SSI_SRC (0x0010)
-+/* Timer DMA mux selection */
-+#define MCF_CCM_MISCCR_TIM_DMA (0x0020)
-+/* SSI RXD/TXD pull select */
-+#define MCF_CCM_MISCCR_SSI_PUS (0x0040)
-+/* SSI RXD/TXD pull enable */
-+#define MCF_CCM_MISCCR_SSI_PUE (0x0080)
-+/* Bus monitor timing field */
-+#define MCF_CCM_MISCCR_BMT(x) (((x) & 0x0007) << 8)
-+/* Bus monitor external enable bit */
-+#define MCF_CCM_MISCCR_BME (0x0800)
-+/* Limp mode enable */
-+#define MCF_CCM_MISCCR_LIMP (0x1000)
-+#define MCF_CCM_MISCCR_BMT_65536 (0 << 8)
-+#define MCF_CCM_MISCCR_BMT_32768 (1 << 8)
-+#define MCF_CCM_MISCCR_BMT_16384 (2 << 8)
-+#define MCF_CCM_MISCCR_BMT_8192 (3 << 8)
-+#define MCF_CCM_MISCCR_BMT_4096 (4 << 8)
-+#define MCF_CCM_MISCCR_BMT_2048 (5 << 8)
-+#define MCF_CCM_MISCCR_BMT_1024 (6 << 8)
-+#define MCF_CCM_MISCCR_BMT_512 (7 << 8)
-+#define MCF_CCM_MISCCR_SSIPUE_UP (1 << 7)
-+#define MCF_CCM_MISCCR_SSIPUE_DOWN (0 << 7)
-+#define MCF_CCM_MISCCR_SSIPUS_UP (1 << 6)
-+#define MCF_CCM_MISCCR_SSIPUS_DOWN (0 << 6)
-+#define MCF_CCM_MISCCR_TIMDMA_TIM (1 << 5)
-+#define MCF_CCM_MISCCR_TIMDMA_SSI (0 << 5)
-+#define MCF_CCM_MISCCR_SSISRC_CLKIN (0 << 4)
-+#define MCF_CCM_MISCCR_SSISRC_PLL (1 << 4)
-+#define MCF_CCM_MISCCR_USBOC_ACTHI (0 << 1)
-+#define MCF_CCM_MISCCR_USBOC_ACTLO (1 << 1)
-+#define MCF_CCM_MISCCR_USBSRC_CLKIN (0)
-+#define MCF_CCM_MISCCR_USBSRC_PLL (1)
-+
-+/* Bit definitions and macros for CDR */
-+/* SSI oversampling clock divider */
-+#define MCF_CCM_CDR_SSIDIV(x) (((x) & 0x00FF))
-+/* Low power clock divider */
-+#define MCF_CCM_CDR_LPDIV(x) (((x) & 0x000F) << 8)
-+
-+/* Bit definitions and macros for UOCSR */
-+/* On-chip transceiver pull-down enable */
-+#define MCF_CCM_UOCSR_XPDE (0x0001)
-+/* USB OTG misc interrupt enable */
-+#define MCF_CCM_UOCSR_UOMIE (0x0002)
-+/* USB OTG controller wake-up event */
-+#define MCF_CCM_UOCSR_WKUP (0x0004)
-+/* VBUS power fault */
-+#define MCF_CCM_UOCSR_PWRFLT (0x0008)
-+/* Session end */
-+#define MCF_CCM_UOCSR_SEND (0x0010)
-+/* VBUS valid indicator */
-+#define MCF_CCM_UOCSR_VVLD (0x0020)
-+/* B-peripheral valid indicator */
-+#define MCF_CCM_UOCSR_BVLD (0x0040)
-+/* A-peripheral valid indicator */
-+#define MCF_CCM_UOCSR_AVLD (0x0080)
-+/* D+ pull-up for FS enabled (read-only) */
-+#define MCF_CCM_UOCSR_DPPU (0x0100)
-+/* VBUS discharge resistor enabled (read-only) */
-+#define MCF_CCM_UOCSR_DCR_VBUS (0x0200)
-+/* VBUS charge resistor enabled (read-only) */
-+#define MCF_CCM_UOCSR_CRG_VBUS (0x0400)
-+/* D- 15Kohm pull-down (read-only) */
-+#define MCF_CCM_UOCSR_DMPD (0x1000)
-+/* D+ 15Kohm pull-down (read-only) */
-+#define MCF_CCM_UOCSR_DPPD (0x2000)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_CCM_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_dspi.h
-@@ -0,0 +1,665 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_DSPI_H__
-+#define __MCF5445X_DSPI_H__
-+
-+/*********************************************************************
-+*
-+* DMA Serial Peripheral Interface (DSPI)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+/* DSPI Module Configuration Register */
-+#define MCF_DSPI_DMCR MCF_REG32(0xFC05C000)
-+/* DSPI Transfer Count Register */
-+#define MCF_DSPI_DTCR MCF_REG32(0xFC05C008)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR0 MCF_REG32(0xFC05C00C)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR1 MCF_REG32(0xFC05C010)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR2 MCF_REG32(0xFC05C014)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR3 MCF_REG32(0xFC05C018)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR4 MCF_REG32(0xFC05C01C)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR5 MCF_REG32(0xFC05C020)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR6 MCF_REG32(0xFC05C024)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR7 MCF_REG32(0xFC05C028
-+/* DSPI Status Register */
-+#define MCF_DSPI_DSR MCF_REG32(0xFC05C02C)
-+/* DSPI DMA/Interrupt Request Select and Enable Register */
-+#define MCF_DSPI_DRSER MCF_REG32(0xFC05C030)
-+/* DSPI Transmit FIFO Register */
-+#define MCF_DSPI_DTFR MCF_REG32(0xFC05C034)
-+/* DSPI Receive FIFO Register */
-+#define MCF_DSPI_DRFR MCF_REG32(0xFC05C038)
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR0 MCF_REG32(0xFC05C03C)
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR1 MCF_REG32(0xFC05C040)
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR2 MCF_REG32(0xFC05C044)
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR3 MCF_REG32(0xFC05C048)
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR0 MCF_REG32(0xFC05C07C)
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR1 MCF_REG32(0xFC05C080)
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR2 MCF_REG32(0xFC05C084)
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR3 MCF_REG32(0xFC05C088)
-+
-+
-+/* Parameterized register read/write macros for multiple registers */
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR(x) MCF_REG32(0xFC05C00C+((x)*0x004))
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR(x) MCF_REG32(0xFC05C03C+((x)*0x004))
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR(x) MCF_REG32(0xFC05C07C+((x)*0x004))
-+
-+/* Bit definitions and macros for DMCR */
-+/* Halt -- stops and starts DSPI transfers */
-+#define MCF_DSPI_DMCR_HALT (0x00000001)
-+/* Sample point selection */
-+#define MCF_DSPI_DMCR_SMPLPT(x) (((x)&0x00000003)<<8)
-+/* Clear receive FIFO */
-+#define MCF_DSPI_DMCR_CLRRXF (0x00000400)
-+/* Clear transmit FIFO */
-+#define MCF_DSPI_DMCR_CLRTXF (0x00000800)
-+/* Disable receive FIFO */
-+#define MCF_DSPI_DMCR_DISRXF (0x00001000)
-+/* Disable transmit FIFO */
-+#define MCF_DSPI_DMCR_DISTXF (0x00002000)
-+/* Module Disable */
-+#define MCF_DSPI_DMCR_MDIS (0x00004000)
-+/* Peripheral chip-select 0 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS0 (0x00010000)
-+/* Peripheral chip-select 1 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS1 (0x00020000)
-+/* Peripheral chip-select 2 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS2 (0x00040000)
-+/* Peripheral chip-select 3 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS3 (0x00080000)
-+/* Peripheral chip-select 4 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS4 (0x00100000)
-+/* Peripheral chip-select 5 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS5 (0x00200000)
-+/* Peripheral chip-select 6 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS6 (0x00400000)
-+/* Peripheral chip-select 7 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS7 (0x00800000)
-+/* Receive FIFO overflow overwrite enable */
-+#define MCF_DSPI_DMCR_ROOE (0x01000000)
-+/* Peripheral chip select strobe enable */
-+#define MCF_DSPI_DMCR_PCSSE (0x02000000)
-+/* Modified timing format enable */
-+#define MCF_DSPI_DMCR_MTFE (0x04000000)
-+/* Freeze */
-+#define MCF_DSPI_DMCR_FRZ (0x08000000)
-+/* DSPI configuration */
-+#define MCF_DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28)
-+/* Continuous SCK enable */
-+#define MCF_DSPI_DMCR_CONT_SCKE (0x40000000)
-+/* Master/Slave mode select */
-+#define MCF_DSPI_DMCR_MSTR (0x80000000)
-+#define MCF_DSPI_DMCR_DCONF_SPI (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS7_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS7_HIGH (0x00800000)
-+#define MCF_DSPI_DMCR_PCSIS6_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS6_HIGH (0x00400000)
-+#define MCF_DSPI_DMCR_PCSIS5_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS5_HIGH (0x00200000)
-+#define MCF_DSPI_DMCR_PCSIS4_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS4_HIGH (0x00100000)
-+#define MCF_DSPI_DMCR_PCSIS3_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS3_HIGH (0x00080000)
-+#define MCF_DSPI_DMCR_PCSIS2_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS2_HIGH (0x00040000)
-+#define MCF_DSPI_DMCR_PCSIS1_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS1_HIGH (0x00020000)
-+#define MCF_DSPI_DMCR_PCSIS0_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS0_HIGH (0x00010000)
-+
-+/* Bit definitions and macros for DTCR */
-+/* SPI transfer count */
-+#define MCF_DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for DCTAR group */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR_DBR (0x80000000)
-+#define MCF_DSPI_DCTAR_CPOL_LOW (0x00000000)
-+#define MCF_DSPI_DCTAR_CPOL_HIGH (0x04000000)
-+#define MCF_DSPI_DCTAR_CPHA_LATCH_RISING (0x00000000)
-+#define MCF_DSPI_DCTAR_CPHA_LATCH_FALLING (0x02000000)
-+#define MCF_DSPI_DCTAR_PCSSCK_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PCSSCK_3CLK (0x00400000)
-+#define MCF_DSPI_DCTAR_PCSSCK_5CLK (0x00800000)
-+#define MCF_DSPI_DCTAR_PCSSCK_7CLK (0x00C00000)
-+#define MCF_DSPI_DCTAR_PASC_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PASC_3CLK (0x00100000)
-+#define MCF_DSPI_DCTAR_PASC_5CLK (0x00200000)
-+#define MCF_DSPI_DCTAR_PASC_7CLK (0x00300000)
-+#define MCF_DSPI_DCTAR_PDT_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PDT_3CLK (0x00040000)
-+#define MCF_DSPI_DCTAR_PDT_5CLK (0x00080000)
-+#define MCF_DSPI_DCTAR_PDT_7CLK (0x000C0000)
-+#define MCF_DSPI_DCTAR_PBR_2CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PBR_3CLK (0x00010000)
-+#define MCF_DSPI_DCTAR_PBR_5CLK (0x00020000)
-+#define MCF_DSPI_DCTAR_PBR_7CLK (0x00030000)
-+
-+/* Bit definitions and macros for DCTAR0 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR0_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR0_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR0_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR0_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR0_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR0_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR0_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR0_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR0_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR0_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR0_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR0_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR0_DBR (0x80000000)
-+#define MCF_DSPI_DCTAR0_CPOL_LOW (0x00000000)
-+#define MCF_DSPI_DCTAR0_CPOL_HIGH (0x04000000)
-+#define MCF_DSPI_DCTAR0_CPHA_LATCH_RISING (0x00000000)
-+#define MCF_DSPI_DCTAR0_CPHA_LATCH_FALLING (0x02000000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_3CLK (0x00400000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_5CLK (0x00800000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_7CLK (0x00C00000)
-+#define MCF_DSPI_DCTAR0_PASC_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR0_PASC_3CLK (0x00100000)
-+#define MCF_DSPI_DCTAR0_PASC_5CLK (0x00200000)
-+#define MCF_DSPI_DCTAR0_PASC_7CLK (0x00300000)
-+#define MCF_DSPI_DCTAR0_PDT_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR0_PDT_3CLK (0x00040000)
-+#define MCF_DSPI_DCTAR0_PDT_5CLK (0x00080000)
-+#define MCF_DSPI_DCTAR0_PDT_7CLK (0x000C0000)
-+#define MCF_DSPI_DCTAR0_PBR_2CLK (0x00000000)
-+#define MCF_DSPI_DCTAR0_PBR_3CLK (0x00010000)
-+#define MCF_DSPI_DCTAR0_PBR_5CLK (0x00020000)
-+#define MCF_DSPI_DCTAR0_PBR_7CLK (0x00030000)
-+
-+/* Bit definitions and macros for DCTAR1 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR1_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR1_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR1_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR1_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR1_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR1_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR1_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR1_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR1_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR1_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR1_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR1_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR1_DBR (0x80000000)
-+
-+
-+/* Bit definitions and macros for DCTAR2 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR2_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR2_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR2_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR2_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR2_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR2_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR2_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR2_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR2_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR2_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR2_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR2_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR2_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR3 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR3_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR3_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR3_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR3_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR3_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR3_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR3_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR3_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR3_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR3_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR3_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR3_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR3_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR4 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR4_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR4_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR4_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR4_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR4_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR4_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR4_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR4_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR4_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR4_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR4_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR4_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR4_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR5 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR5_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR5_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR5_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR5_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR5_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR5_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR5_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR5_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR5_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR5_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR5_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR5_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR5_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR6 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR6_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR6_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR6_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR6_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR6_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR6_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR6_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR6_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR6_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR6_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR6_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR6_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR6_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR7 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR7_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR7_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR7_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR7_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR7_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR7_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR7_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR7_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR7_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR7_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR7_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR7_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR7_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DSR */
-+/* Receive next pointer */
-+#define MCF_DSPI_DSR_RXPTR(x) (((x)&0x0000000F))
-+/* Receive FIFO counter */
-+#define MCF_DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4)
-+/* Transmit next pointer */
-+#define MCF_DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8)
-+/* Transmit FIFO counter */
-+#define MCF_DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12)
-+/* Receive FIFO drain flag */
-+#define MCF_DSPI_DSR_RFDF (0x00020000)
-+/* Receive FIFO overflow flag */
-+#define MCF_DSPI_DSR_RFOF (0x00080000)
-+/* Transmit FIFO fill flag */
-+#define MCF_DSPI_DSR_TFFF (0x02000000)
-+/* Transmit FIFO underflow flag */
-+#define MCF_DSPI_DSR_TFUF (0x08000000)
-+/* End of queue flag */
-+#define MCF_DSPI_DSR_EOQF (0x10000000)
-+/* Tx and Rx status (enabled | disabled) */
-+#define MCF_DSPI_DSR_TXRXS (0x40000000)
-+/* Transfer complete flag */
-+#define MCF_DSPI_DSR_TCF (0x80000000)
-+
-+/* Bit definitions and macros for DRSER */
-+/* Receive FIFO drain DMA or interrupt select */
-+#define MCF_DSPI_DRSER_RFDFS (0x00010000)
-+/* Receive FIFO drain request enable */
-+#define MCF_DSPI_DRSER_RFDFE (0x00020000)
-+/* Receive FIFO overflow request enable */
-+#define MCF_DSPI_DRSER_RFOFE (0x00080000)
-+/* Transmit FIFO fill DMA or interrupt select */
-+#define MCF_DSPI_DRSER_TFFFS (0x01000000)
-+/* Transmit FIFO fill request enable */
-+#define MCF_DSPI_DRSER_TFFFE (0x02000000)
-+/* Transmit FIFO underflow request enable */
-+#define MCF_DSPI_DRSER_TFUFE (0x08000000)
-+/* DSPI finished request enable */
-+#define MCF_DSPI_DRSER_EOQFE (0x10000000)
-+/* Transmission complete request enable */
-+#define MCF_DSPI_DRSER_TCFE (0x80000000)
-+
-+/* Bit definitions and macros for DTFR */
-+/* Transmit data */
-+#define MCF_DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFR_PCS0 (0x00010000)
-+/* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFR_PCS1 (0x00020000)
-+/* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFR_PCS2 (0x00040000)
-+/* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFR_PCS3 (0x00080000)
-+/* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFR_PCS4 (0x00100000)
-+/* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFR_PCS5 (0x00200000)
-+/* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFR_PCS6 (0x00400000)
-+/* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFR_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFR_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFR_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFR_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DRFR */
-+/* Receive data */
-+#define MCF_DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DTFDR group */
-+/* Transmit data */
-+#define MCF_DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS0 (0x00010000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS1 (0x00020000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS2 (0x00040000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS3 (0x00080000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS4 (0x00100000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS5 (0x00200000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS6 (0x00400000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DTFDR0 */
-+/* Transmit data */
-+#define MCF_DSPI_DTFDR0_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS0 (0x00010000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS1 (0x00020000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS2 (0x00040000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS3 (0x00080000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS4 (0x00100000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS5 (0x00200000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS6 (0x00400000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR0_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR0_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR0_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR0_CONT (0x80000000)
-+/* Bit definitions and macros for DTFDR1 */
-+/* Transmit data */
-+#define MCF_DSPI_DTFDR1_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR1_PCS0 (0x00010000)
-+/* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR1_PCS1 (0x00020000)
-+/* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR1_PCS2 (0x00040000)
-+/* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR1_PCS3 (0x00080000)
-+/* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR1_PCS4 (0x00100000)
-+/* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR1_PCS5 (0x00200000)
-+/* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR1_PCS6 (0x00400000)
-+/* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR1_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR1_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR1_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR1_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR1_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DTFDR2 */
-+#define MCF_DSPI_DTFDR2_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR2_PCS0 (0x00010000)
-+/* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR2_PCS1 (0x00020000)
-+/* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR2_PCS2 (0x00040000)
-+/* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR2_PCS3 (0x00080000)
-+/* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR2_PCS4 (0x00100000)
-+/* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR2_PCS5 (0x00200000)
-+/* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR2_PCS6 (0x00400000)
-+/* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR2_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR2_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR2_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR2_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR2_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DTFDR3 */
-+/* Transmit data */
-+#define MCF_DSPI_DTFDR3_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR3_PCS0 (0x00010000)
-+/* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR3_PCS1 (0x00020000)
-+/* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR3_PCS2 (0x00040000)
-+/* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR3_PCS3 (0x00080000)
-+/* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR3_PCS4 (0x00100000)
-+/* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR3_PCS5 (0x00200000)
-+/* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR3_PCS6 (0x00400000)
-+/* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR3_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR3_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR3_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR3_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR3_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DRFDR group */
-+#define MCF_DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DRFDR0 */
-+#define MCF_DSPI_DRFDR0_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DRFDR1 */
-+#define MCF_DSPI_DRFDR1_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DRFDR2 */
-+#define MCF_DSPI_DRFDR2_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DRFDR3 */
-+#define MCF_DSPI_DRFDR3_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_DSPI_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_dtim.h
-@@ -0,0 +1,96 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_DTIM_H__
-+#define __MCF5445X_DTIM_H__
-+
-+/*********************************************************************
-+*
-+* DMA Timers (DTIM)
-+*
-+*********************************************************************/
-+/* Register read/write macros */
-+#define MCF_DTIM0_DTMR 0xFC070000 /* DMA Timer Mode Register */
-+#define MCF_DTIM0_DTXMR 0xFC070002 /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM0_DTER 0xFC070003 /* DMA Timer Event Register */
-+#define MCF_DTIM0_DTRR 0xFC070004 /* DMA Timer Reference Register */
-+#define MCF_DTIM0_DTCR 0xFC070008 /* DMA Timer Capture Register */
-+#define MCF_DTIM0_DTCN 0xFC07000C /* DMA Timer Counter Register */
-+#define MCF_DTIM1_DTMR 0xFC074000 /* DMA Timer Mode Register */
-+#define MCF_DTIM1_DTXMR 0xFC074002 /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM1_DTER 0xFC074003 /* DMA Timer Event Register */
-+#define MCF_DTIM1_DTRR 0xFC074004 /* DMA Timer Reference Register */
-+#define MCF_DTIM1_DTCR 0xFC074008 /* DMA Timer Capture Register */
-+#define MCF_DTIM1_DTCN 0xFC07400C /* DMA Timer Counter Register */
-+#define MCF_DTIM2_DTMR 0xFC078000 /* DMA Timer Mode Register */
-+#define MCF_DTIM2_DTXMR 0xFC078002 /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM2_DTER 0xFC078003 /* DMA Timer Event Register */
-+#define MCF_DTIM2_DTRR 0xFC078004 /* DMA Timer Reference Register */
-+#define MCF_DTIM2_DTCR 0xFC078008 /* DMA Timer Capture Register */
-+#define MCF_DTIM2_DTCN 0xFC07800C /* DMA Timer Counter Register */
-+#define MCF_DTIM3_DTMR 0xFC07C000 /* DMA Timer Mode Register */
-+#define MCF_DTIM3_DTXMR 0xFC07C002 /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM3_DTER 0xFC07C003 /* DMA Timer Event Register */
-+#define MCF_DTIM3_DTRR 0xFC07C004 /* DMA Timer Reference Register */
-+#define MCF_DTIM3_DTCR 0xFC07C008 /* DMA Timer Capture Register */
-+#define MCF_DTIM3_DTCN 0xFC07C00C /* DMA Timer Counter Register */
-+
-+/* Parameterized register read/write macros for multiple modules */
-+/* DMA Timer Mode Register */
-+#define MCF_DTIM_DTMR(x) (0xFC070000+((x)*0x4000))
-+/* DMA Timer Extended Mode Register */
-+#define MCF_DTIM_DTXMR(x) (0xFC070002+((x)*0x4000))
-+/* DMA Timer Event Register */
-+#define MCF_DTIM_DTER(x) (0xFC070003+((x)*0x4000))
-+/* DMA Timer Reference Register */
-+#define MCF_DTIM_DTRR(x) (0xFC070004+((x)*0x4000))
-+/* DMA Timer Capture Register */
-+#define MCF_DTIM_DTCR(x) (0xFC070008+((x)*0x4000))
-+/* DMA Timer Counter Register */
-+#define MCF_DTIM_DTCN(x) (0xFC07000C+((x)*0x4000))
-+
-+/* Bit definitions and macros for DTMR */
-+#define MCF_DTIM_DTMR_RST (0x0001) /* Reset */
-+#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */
-+#define MCF_DTIM_DTMR_FRR (0x0008) /* Free run/restart */
-+/* Output reference request/interrupt enable */
-+#define MCF_DTIM_DTMR_ORRI (0x0010)
-+#define MCF_DTIM_DTMR_OM (0x0020) /* Output Mode */
-+#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */
-+#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */
-+#define MCF_DTIM_DTMR_RST_EN (0x0001)
-+#define MCF_DTIM_DTMR_RST_RST (0x0000)
-+#define MCF_DTIM_DTMR_CE_ANY (0x00C0)
-+#define MCF_DTIM_DTMR_CE_FALL (0x0080)
-+#define MCF_DTIM_DTMR_CE_RISE (0x0040)
-+#define MCF_DTIM_DTMR_CE_NONE (0x0000)
-+#define MCF_DTIM_DTMR_CLK_DTIN (0x0006)
-+#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004)
-+#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002)
-+#define MCF_DTIM_DTMR_CLK_STOP (0x0000)
-+
-+/* Bit definitions and macros for DTXMR */
-+#define MCF_DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */
-+#define MCF_DTIM_DTXMR_DMAEN (0x80) /* DMA request */
-+
-+/* Bit definitions and macros for DTER */
-+#define MCF_DTIM_DTER_CAP (0x01) /* Capture event */
-+#define MCF_DTIM_DTER_REF (0x02) /* Output reference event */
-+
-+/* Interrupts used for system timers */
-+#define MCFSIM_ICR_TIMER0 (0xFC048040+32)
-+#define MCFSIM_ICR_TIMER1 (0xFC048040+33)
-+#define MCFSIM_ICR_TIMER2 (0xFC048040+34)
-+#define MCFSIM_ICR_TIMER3 (0xFC048040+35)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_DTIM_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_edma.h
-@@ -0,0 +1,1472 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef __MCF5445X_EDMA_H__
-+#define __MCF5445X_EDMA_H__
-+
-+/*
-+ * Enhanced DMA (EDMA)
-+ */
-+
-+/* Channels */
-+#define MCF_EDMA_CHAN_DREQ0 0 /* External DMA request 0 */
-+#define MCF_EDMA_CHAN_DREQ1 1 /* External DMA request 1 */
-+#define MCF_EDMA_CHAN_UART0_RX 2 /* UART0 Receive */
-+#define MCF_EDMA_CHAN_UART0_TX 3 /* UART0 Transmit */
-+#define MCF_EDMA_CHAN_UART1_RX 4 /* UART1 Receive */
-+#define MCF_EDMA_CHAN_UART1_TX 5 /* UART1 Transmit */
-+#define MCF_EDMA_CHAN_UART2_RX 6 /* UART2 Receive */
-+#define MCF_EDMA_CHAN_UART2_TX 7 /* UART2 Transmit */
-+#define MCF_EDMA_CHAN_TIMER0 8 /* Timer 0 / SSI0 Rx */
-+#define MCF_EDMA_CHAN_TIMER1 9 /* Timer 1 / SSI1 Rx */
-+#define MCF_EDMA_CHAN_TIMER2 10 /* Timer 2 / SSI0 Tx */
-+#define MCF_EDMA_CHAN_TIMER3 11 /* Timer 3 / SSI1 Tx */
-+#define MCF_EDMA_CHAN_DSPI_RX 12 /* DSPI Receive */
-+#define MCF_EDMA_CHAN_DSPI_TX 13 /* DSPI Transmit */
-+#define MCF_EDMA_CHAN_ATA_RX 14 /* ATA Receive */
-+#define MCF_EDMA_CHAN_ATA_TX 15 /* ATA Transmit */
-+
-+/* Register read/write macros */
-+#define MCF_EDMA_CR MCF_REG32(0xFC044000)
-+#define MCF_EDMA_ES MCF_REG32(0xFC044004)
-+#define MCF_EDMA_ERQ MCF_REG16(0xFC04400E)
-+#define MCF_EDMA_EEI MCF_REG16(0xFC044016)
-+#define MCF_EDMA_SERQ MCF_REG08(0xFC044018)
-+#define MCF_EDMA_CERQ MCF_REG08(0xFC044019)
-+#define MCF_EDMA_SEEI MCF_REG08(0xFC04401A)
-+#define MCF_EDMA_CEEI MCF_REG08(0xFC04401B)
-+#define MCF_EDMA_CINT MCF_REG08(0xFC04401C)
-+#define MCF_EDMA_CERR MCF_REG08(0xFC04401D)
-+#define MCF_EDMA_SSRT MCF_REG08(0xFC04401E)
-+#define MCF_EDMA_CDNE MCF_REG08(0xFC04401F)
-+#define MCF_EDMA_INTR MCF_REG16(0xFC044026)
-+#define MCF_EDMA_ERR MCF_REG16(0xFC04402E)
-+#define MCF_EDMA_DCHPRI0 MCF_REG08(0xFC044100)
-+#define MCF_EDMA_DCHPRI1 MCF_REG08(0xFC044101)
-+#define MCF_EDMA_DCHPRI2 MCF_REG08(0xFC044102)
-+#define MCF_EDMA_DCHPRI3 MCF_REG08(0xFC044103)
-+#define MCF_EDMA_DCHPRI4 MCF_REG08(0xFC044104)
-+#define MCF_EDMA_DCHPRI5 MCF_REG08(0xFC044105)
-+#define MCF_EDMA_DCHPRI6 MCF_REG08(0xFC044106)
-+#define MCF_EDMA_DCHPRI7 MCF_REG08(0xFC044107)
-+#define MCF_EDMA_DCHPRI8 MCF_REG08(0xFC044108)
-+#define MCF_EDMA_DCHPRI9 MCF_REG08(0xFC044109)
-+#define MCF_EDMA_DCHPRI10 MCF_REG08(0xFC04410A)
-+#define MCF_EDMA_DCHPRI11 MCF_REG08(0xFC04410B)
-+#define MCF_EDMA_DCHPRI12 MCF_REG08(0xFC04410C)
-+#define MCF_EDMA_DCHPRI13 MCF_REG08(0xFC04410D)
-+#define MCF_EDMA_DCHPRI14 MCF_REG08(0xFC04410E)
-+#define MCF_EDMA_DCHPRI15 MCF_REG08(0xFC04410F)
-+#define MCF_EDMA_TCD0_SADDR MCF_REG32(0xFC045000)
-+#define MCF_EDMA_TCD0_ATTR MCF_REG16(0xFC045004)
-+#define MCF_EDMA_TCD0_SOFF MCF_REG16(0xFC045006)
-+#define MCF_EDMA_TCD0_NBYTES MCF_REG32(0xFC045008)
-+#define MCF_EDMA_TCD0_SLAST MCF_REG32(0xFC04500C)
-+#define MCF_EDMA_TCD0_DADDR MCF_REG32(0xFC045010)
-+#define MCF_EDMA_TCD0_CITER_ELINK MCF_REG16(0xFC045014)
-+#define MCF_EDMA_TCD0_CITER MCF_REG16(0xFC045014)
-+#define MCF_EDMA_TCD0_DOFF MCF_REG16(0xFC045016)
-+#define MCF_EDMA_TCD0_DLAST_SGA MCF_REG32(0xFC045018)
-+#define MCF_EDMA_TCD0_BITER_ELINK MCF_REG16(0xFC04501C)
-+#define MCF_EDMA_TCD0_BITER MCF_REG16(0xFC04501C)
-+#define MCF_EDMA_TCD0_CSR MCF_REG16(0xFC04501E)
-+#define MCF_EDMA_TCD1_SADDR MCF_REG32(0xFC045020)
-+#define MCF_EDMA_TCD1_ATTR MCF_REG16(0xFC045024)
-+#define MCF_EDMA_TCD1_SOFF MCF_REG16(0xFC045026)
-+#define MCF_EDMA_TCD1_NBYTES MCF_REG32(0xFC045028)
-+#define MCF_EDMA_TCD1_SLAST MCF_REG32(0xFC04502C)
-+#define MCF_EDMA_TCD1_DADDR MCF_REG32(0xFC045030)
-+#define MCF_EDMA_TCD1_CITER_ELINK MCF_REG16(0xFC045034)
-+#define MCF_EDMA_TCD1_CITER MCF_REG16(0xFC045034)
-+#define MCF_EDMA_TCD1_DOFF MCF_REG16(0xFC045036)
-+#define MCF_EDMA_TCD1_DLAST_SGA MCF_REG32(0xFC045038)
-+#define MCF_EDMA_TCD1_BITER MCF_REG16(0xFC04503C)
-+#define MCF_EDMA_TCD1_BITER_ELINK MCF_REG16(0xFC04503C)
-+#define MCF_EDMA_TCD1_CSR MCF_REG16(0xFC04503E)
-+#define MCF_EDMA_TCD2_SADDR MCF_REG32(0xFC045040)
-+#define MCF_EDMA_TCD2_ATTR MCF_REG16(0xFC045044)
-+#define MCF_EDMA_TCD2_SOFF MCF_REG16(0xFC045046)
-+#define MCF_EDMA_TCD2_NBYTES MCF_REG32(0xFC045048)
-+#define MCF_EDMA_TCD2_SLAST MCF_REG32(0xFC04504C)
-+#define MCF_EDMA_TCD2_DADDR MCF_REG32(0xFC045050)
-+#define MCF_EDMA_TCD2_CITER MCF_REG16(0xFC045054)
-+#define MCF_EDMA_TCD2_CITER_ELINK MCF_REG16(0xFC045054)
-+#define MCF_EDMA_TCD2_DOFF MCF_REG16(0xFC045056)
-+#define MCF_EDMA_TCD2_DLAST_SGA MCF_REG32(0xFC045058)
-+#define MCF_EDMA_TCD2_BITER_ELINK MCF_REG16(0xFC04505C)
-+#define MCF_EDMA_TCD2_BITER MCF_REG16(0xFC04505C)
-+#define MCF_EDMA_TCD2_CSR MCF_REG16(0xFC04505E)
-+#define MCF_EDMA_TCD3_SADDR MCF_REG32(0xFC045060)
-+#define MCF_EDMA_TCD3_ATTR MCF_REG16(0xFC045064)
-+#define MCF_EDMA_TCD3_SOFF MCF_REG16(0xFC045066)
-+#define MCF_EDMA_TCD3_NBYTES MCF_REG32(0xFC045068)
-+#define MCF_EDMA_TCD3_SLAST MCF_REG32(0xFC04506C)
-+#define MCF_EDMA_TCD3_DADDR MCF_REG32(0xFC045070)
-+#define MCF_EDMA_TCD3_CITER MCF_REG16(0xFC045074)
-+#define MCF_EDMA_TCD3_CITER_ELINK MCF_REG16(0xFC045074)
-+#define MCF_EDMA_TCD3_DOFF MCF_REG16(0xFC045076)
-+#define MCF_EDMA_TCD3_DLAST_SGA MCF_REG32(0xFC045078)
-+#define MCF_EDMA_TCD3_BITER_ELINK MCF_REG16(0xFC04507C)
-+#define MCF_EDMA_TCD3_BITER MCF_REG16(0xFC04507C)
-+#define MCF_EDMA_TCD3_CSR MCF_REG16(0xFC04507E)
-+#define MCF_EDMA_TCD4_SADDR MCF_REG32(0xFC045080)
-+#define MCF_EDMA_TCD4_ATTR MCF_REG16(0xFC045084)
-+#define MCF_EDMA_TCD4_SOFF MCF_REG16(0xFC045086)
-+#define MCF_EDMA_TCD4_NBYTES MCF_REG32(0xFC045088)
-+#define MCF_EDMA_TCD4_SLAST MCF_REG32(0xFC04508C)
-+#define MCF_EDMA_TCD4_DADDR MCF_REG32(0xFC045090)
-+#define MCF_EDMA_TCD4_CITER MCF_REG16(0xFC045094)
-+#define MCF_EDMA_TCD4_CITER_ELINK MCF_REG16(0xFC045094)
-+#define MCF_EDMA_TCD4_DOFF MCF_REG16(0xFC045096)
-+#define MCF_EDMA_TCD4_DLAST_SGA MCF_REG32(0xFC045098)
-+#define MCF_EDMA_TCD4_BITER MCF_REG16(0xFC04509C)
-+#define MCF_EDMA_TCD4_BITER_ELINK MCF_REG16(0xFC04509C)
-+#define MCF_EDMA_TCD4_CSR MCF_REG16(0xFC04509E)
-+#define MCF_EDMA_TCD5_SADDR MCF_REG32(0xFC0450A0)
-+#define MCF_EDMA_TCD5_ATTR MCF_REG16(0xFC0450A4)
-+#define MCF_EDMA_TCD5_SOFF MCF_REG16(0xFC0450A6)
-+#define MCF_EDMA_TCD5_NBYTES MCF_REG32(0xFC0450A8)
-+#define MCF_EDMA_TCD5_SLAST MCF_REG32(0xFC0450AC)
-+#define MCF_EDMA_TCD5_DADDR MCF_REG32(0xFC0450B0)
-+#define MCF_EDMA_TCD5_CITER MCF_REG16(0xFC0450B4)
-+#define MCF_EDMA_TCD5_CITER_ELINK MCF_REG16(0xFC0450B4)
-+#define MCF_EDMA_TCD5_DOFF MCF_REG16(0xFC0450B6)
-+#define MCF_EDMA_TCD5_DLAST_SGA MCF_REG32(0xFC0450B8)
-+#define MCF_EDMA_TCD5_BITER_ELINK MCF_REG16(0xFC0450BC)
-+#define MCF_EDMA_TCD5_BITER MCF_REG16(0xFC0450BC)
-+#define MCF_EDMA_TCD5_CSR MCF_REG16(0xFC0450BE)
-+#define MCF_EDMA_TCD6_SADDR MCF_REG32(0xFC0450C0)
-+#define MCF_EDMA_TCD6_ATTR MCF_REG16(0xFC0450C4)
-+#define MCF_EDMA_TCD6_SOFF MCF_REG16(0xFC0450C6)
-+#define MCF_EDMA_TCD6_NBYTES MCF_REG32(0xFC0450C8)
-+#define MCF_EDMA_TCD6_SLAST MCF_REG32(0xFC0450CC)
-+#define MCF_EDMA_TCD6_DADDR MCF_REG32(0xFC0450D0)
-+#define MCF_EDMA_TCD6_CITER MCF_REG16(0xFC0450D4)
-+#define MCF_EDMA_TCD6_CITER_ELINK MCF_REG16(0xFC0450D4)
-+#define MCF_EDMA_TCD6_DOFF MCF_REG16(0xFC0450D6)
-+#define MCF_EDMA_TCD6_DLAST_SGA MCF_REG32(0xFC0450D8)
-+#define MCF_EDMA_TCD6_BITER_ELINK MCF_REG16(0xFC0450DC)
-+#define MCF_EDMA_TCD6_BITER MCF_REG16(0xFC0450DC)
-+#define MCF_EDMA_TCD6_CSR MCF_REG16(0xFC0450DE)
-+#define MCF_EDMA_TCD7_SADDR MCF_REG32(0xFC0450E0)
-+#define MCF_EDMA_TCD7_ATTR MCF_REG16(0xFC0450E4)
-+#define MCF_EDMA_TCD7_SOFF MCF_REG16(0xFC0450E6)
-+#define MCF_EDMA_TCD7_NBYTES MCF_REG32(0xFC0450E8)
-+#define MCF_EDMA_TCD7_SLAST MCF_REG32(0xFC0450EC)
-+#define MCF_EDMA_TCD7_DADDR MCF_REG32(0xFC0450F0)
-+#define MCF_EDMA_TCD7_CITER MCF_REG16(0xFC0450F4)
-+#define MCF_EDMA_TCD7_CITER_ELINK MCF_REG16(0xFC0450F4)
-+#define MCF_EDMA_TCD7_DOFF MCF_REG16(0xFC0450F6)
-+#define MCF_EDMA_TCD7_DLAST_SGA MCF_REG32(0xFC0450F8)
-+#define MCF_EDMA_TCD7_BITER_ELINK MCF_REG16(0xFC0450FC)
-+#define MCF_EDMA_TCD7_BITER MCF_REG16(0xFC0450FC)
-+#define MCF_EDMA_TCD7_CSR MCF_REG16(0xFC0450FE)
-+#define MCF_EDMA_TCD8_SADDR MCF_REG32(0xFC045100)
-+#define MCF_EDMA_TCD8_ATTR MCF_REG16(0xFC045104)
-+#define MCF_EDMA_TCD8_SOFF MCF_REG16(0xFC045106)
-+#define MCF_EDMA_TCD8_NBYTES MCF_REG32(0xFC045108)
-+#define MCF_EDMA_TCD8_SLAST MCF_REG32(0xFC04510C)
-+#define MCF_EDMA_TCD8_DADDR MCF_REG32(0xFC045110)
-+#define MCF_EDMA_TCD8_CITER MCF_REG16(0xFC045114)
-+#define MCF_EDMA_TCD8_CITER_ELINK MCF_REG16(0xFC045114)
-+#define MCF_EDMA_TCD8_DOFF MCF_REG16(0xFC045116)
-+#define MCF_EDMA_TCD8_DLAST_SGA MCF_REG32(0xFC045118)
-+#define MCF_EDMA_TCD8_BITER_ELINK MCF_REG16(0xFC04511C)
-+#define MCF_EDMA_TCD8_BITER MCF_REG16(0xFC04511C)
-+#define MCF_EDMA_TCD8_CSR MCF_REG16(0xFC04511E)
-+#define MCF_EDMA_TCD9_SADDR MCF_REG32(0xFC045120)
-+#define MCF_EDMA_TCD9_ATTR MCF_REG16(0xFC045124)
-+#define MCF_EDMA_TCD9_SOFF MCF_REG16(0xFC045126)
-+#define MCF_EDMA_TCD9_NBYTES MCF_REG32(0xFC045128)
-+#define MCF_EDMA_TCD9_SLAST MCF_REG32(0xFC04512C)
-+#define MCF_EDMA_TCD9_DADDR MCF_REG32(0xFC045130)
-+#define MCF_EDMA_TCD9_CITER_ELINK MCF_REG16(0xFC045134)
-+#define MCF_EDMA_TCD9_CITER MCF_REG16(0xFC045134)
-+#define MCF_EDMA_TCD9_DOFF MCF_REG16(0xFC045136)
-+#define MCF_EDMA_TCD9_DLAST_SGA MCF_REG32(0xFC045138)
-+#define MCF_EDMA_TCD9_BITER_ELINK MCF_REG16(0xFC04513C)
-+#define MCF_EDMA_TCD9_BITER MCF_REG16(0xFC04513C)
-+#define MCF_EDMA_TCD9_CSR MCF_REG16(0xFC04513E)
-+#define MCF_EDMA_TCD10_SADDR MCF_REG32(0xFC045140)
-+#define MCF_EDMA_TCD10_ATTR MCF_REG16(0xFC045144)
-+#define MCF_EDMA_TCD10_SOFF MCF_REG16(0xFC045146)
-+#define MCF_EDMA_TCD10_NBYTES MCF_REG32(0xFC045148)
-+#define MCF_EDMA_TCD10_SLAST MCF_REG32(0xFC04514C)
-+#define MCF_EDMA_TCD10_DADDR MCF_REG32(0xFC045150)
-+#define MCF_EDMA_TCD10_CITER_ELINK MCF_REG16(0xFC045154)
-+#define MCF_EDMA_TCD10_CITER MCF_REG16(0xFC045154)
-+#define MCF_EDMA_TCD10_DOFF MCF_REG16(0xFC045156)
-+#define MCF_EDMA_TCD10_DLAST_SGA MCF_REG32(0xFC045158)
-+#define MCF_EDMA_TCD10_BITER MCF_REG16(0xFC04515C)
-+#define MCF_EDMA_TCD10_BITER_ELINK MCF_REG16(0xFC04515C)
-+#define MCF_EDMA_TCD10_CSR MCF_REG16(0xFC04515E)
-+#define MCF_EDMA_TCD11_SADDR MCF_REG32(0xFC045160)
-+#define MCF_EDMA_TCD11_ATTR MCF_REG16(0xFC045164)
-+#define MCF_EDMA_TCD11_SOFF MCF_REG16(0xFC045166)
-+#define MCF_EDMA_TCD11_NBYTES MCF_REG32(0xFC045168)
-+#define MCF_EDMA_TCD11_SLAST MCF_REG32(0xFC04516C)
-+#define MCF_EDMA_TCD11_DADDR MCF_REG32(0xFC045170)
-+#define MCF_EDMA_TCD11_CITER MCF_REG16(0xFC045174)
-+#define MCF_EDMA_TCD11_CITER_ELINK MCF_REG16(0xFC045174)
-+#define MCF_EDMA_TCD11_DOFF MCF_REG16(0xFC045176)
-+#define MCF_EDMA_TCD11_DLAST_SGA MCF_REG32(0xFC045178)
-+#define MCF_EDMA_TCD11_BITER MCF_REG16(0xFC04517C)
-+#define MCF_EDMA_TCD11_BITER_ELINK MCF_REG16(0xFC04517C)
-+#define MCF_EDMA_TCD11_CSR MCF_REG16(0xFC04517E)
-+#define MCF_EDMA_TCD12_SADDR MCF_REG32(0xFC045180)
-+#define MCF_EDMA_TCD12_ATTR MCF_REG16(0xFC045184)
-+#define MCF_EDMA_TCD12_SOFF MCF_REG16(0xFC045186)
-+#define MCF_EDMA_TCD12_NBYTES MCF_REG32(0xFC045188)
-+#define MCF_EDMA_TCD12_SLAST MCF_REG32(0xFC04518C)
-+#define MCF_EDMA_TCD12_DADDR MCF_REG32(0xFC045190)
-+#define MCF_EDMA_TCD12_CITER MCF_REG16(0xFC045194)
-+#define MCF_EDMA_TCD12_CITER_ELINK MCF_REG16(0xFC045194)
-+#define MCF_EDMA_TCD12_DOFF MCF_REG16(0xFC045196)
-+#define MCF_EDMA_TCD12_DLAST_SGA MCF_REG32(0xFC045198)
-+#define MCF_EDMA_TCD12_BITER MCF_REG16(0xFC04519C)
-+#define MCF_EDMA_TCD12_BITER_ELINK MCF_REG16(0xFC04519C)
-+#define MCF_EDMA_TCD12_CSR MCF_REG16(0xFC04519E)
-+#define MCF_EDMA_TCD13_SADDR MCF_REG32(0xFC0451A0)
-+#define MCF_EDMA_TCD13_ATTR MCF_REG16(0xFC0451A4)
-+#define MCF_EDMA_TCD13_SOFF MCF_REG16(0xFC0451A6)
-+#define MCF_EDMA_TCD13_NBYTES MCF_REG32(0xFC0451A8)
-+#define MCF_EDMA_TCD13_SLAST MCF_REG32(0xFC0451AC)
-+#define MCF_EDMA_TCD13_DADDR MCF_REG32(0xFC0451B0)
-+#define MCF_EDMA_TCD13_CITER_ELINK MCF_REG16(0xFC0451B4)
-+#define MCF_EDMA_TCD13_CITER MCF_REG16(0xFC0451B4)
-+#define MCF_EDMA_TCD13_DOFF MCF_REG16(0xFC0451B6)
-+#define MCF_EDMA_TCD13_DLAST_SGA MCF_REG32(0xFC0451B8)
-+#define MCF_EDMA_TCD13_BITER_ELINK MCF_REG16(0xFC0451BC)
-+#define MCF_EDMA_TCD13_BITER MCF_REG16(0xFC0451BC)
-+#define MCF_EDMA_TCD13_CSR MCF_REG16(0xFC0451BE)
-+#define MCF_EDMA_TCD14_SADDR MCF_REG32(0xFC0451C0)
-+#define MCF_EDMA_TCD14_ATTR MCF_REG16(0xFC0451C4)
-+#define MCF_EDMA_TCD14_SOFF MCF_REG16(0xFC0451C6)
-+#define MCF_EDMA_TCD14_NBYTES MCF_REG32(0xFC0451C8)
-+#define MCF_EDMA_TCD14_SLAST MCF_REG32(0xFC0451CC)
-+#define MCF_EDMA_TCD14_DADDR MCF_REG32(0xFC0451D0)
-+#define MCF_EDMA_TCD14_CITER MCF_REG16(0xFC0451D4)
-+#define MCF_EDMA_TCD14_CITER_ELINK MCF_REG16(0xFC0451D4)
-+#define MCF_EDMA_TCD14_DOFF MCF_REG16(0xFC0451D6)
-+#define MCF_EDMA_TCD14_DLAST_SGA MCF_REG32(0xFC0451D8)
-+#define MCF_EDMA_TCD14_BITER_ELINK MCF_REG16(0xFC0451DC)
-+#define MCF_EDMA_TCD14_BITER MCF_REG16(0xFC0451DC)
-+#define MCF_EDMA_TCD14_CSR MCF_REG16(0xFC0451DE)
-+#define MCF_EDMA_TCD15_SADDR MCF_REG32(0xFC0451E0)
-+#define MCF_EDMA_TCD15_ATTR MCF_REG16(0xFC0451E4)
-+#define MCF_EDMA_TCD15_SOFF MCF_REG16(0xFC0451E6)
-+#define MCF_EDMA_TCD15_NBYTES MCF_REG32(0xFC0451E8)
-+#define MCF_EDMA_TCD15_SLAST MCF_REG32(0xFC0451EC)
-+#define MCF_EDMA_TCD15_DADDR MCF_REG32(0xFC0451F0)
-+#define MCF_EDMA_TCD15_CITER_ELINK MCF_REG16(0xFC0451F4)
-+#define MCF_EDMA_TCD15_CITER MCF_REG16(0xFC0451F4)
-+#define MCF_EDMA_TCD15_DOFF MCF_REG16(0xFC0451F6)
-+#define MCF_EDMA_TCD15_DLAST_SGA MCF_REG32(0xFC0451F8)
-+#define MCF_EDMA_TCD15_BITER MCF_REG16(0xFC0451FC)
-+#define MCF_EDMA_TCD15_BITER_ELINK MCF_REG16(0xFC0451FC)
-+#define MCF_EDMA_TCD15_CSR MCF_REG16(0xFC0451FE)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_EDMA_DCHPRI(x) MCF_REG08(0xFC044100+((x)*0x001))
-+#define MCF_EDMA_TCD_SADDR(x) MCF_REG32(0xFC045000+((x)*0x020))
-+#define MCF_EDMA_TCD_ATTR(x) MCF_REG16(0xFC045004+((x)*0x020))
-+#define MCF_EDMA_TCD_SOFF(x) MCF_REG16(0xFC045006+((x)*0x020))
-+#define MCF_EDMA_TCD_NBYTES(x) MCF_REG32(0xFC045008+((x)*0x020))
-+#define MCF_EDMA_TCD_SLAST(x) MCF_REG32(0xFC04500C+((x)*0x020))
-+#define MCF_EDMA_TCD_DADDR(x) MCF_REG32(0xFC045010+((x)*0x020))
-+#define MCF_EDMA_TCD_CITER_ELINK(x) MCF_REG16(0xFC045014+((x)*0x020))
-+#define MCF_EDMA_TCD_CITER(x) MCF_REG16(0xFC045014+((x)*0x020))
-+#define MCF_EDMA_TCD_DOFF(x) MCF_REG16(0xFC045016+((x)*0x020))
-+#define MCF_EDMA_TCD_DLAST_SGA(x) MCF_REG32(0xFC045018+((x)*0x020))
-+#define MCF_EDMA_TCD_BITER_ELINK(x) MCF_REG16(0xFC04501C+((x)*0x020))
-+#define MCF_EDMA_TCD_BITER(x) MCF_REG16(0xFC04501C+((x)*0x020))
-+#define MCF_EDMA_TCD_CSR(x) MCF_REG16((0xFC04501e)+((x)*0x020))
-+
-+/* Bit definitions and macros for CR */
-+#define MCF_EDMA_CR_EDBG (0x00000002)
-+#define MCF_EDMA_CR_ERCA (0x00000004)
-+
-+/* Bit definitions and macros for ES */
-+#define MCF_EDMA_ES_DBE (0x00000001)
-+#define MCF_EDMA_ES_SBE (0x00000002)
-+#define MCF_EDMA_ES_SGE (0x00000004)
-+#define MCF_EDMA_ES_NCE (0x00000008)
-+#define MCF_EDMA_ES_DOE (0x00000010)
-+#define MCF_EDMA_ES_DAE (0x00000020)
-+#define MCF_EDMA_ES_SOE (0x00000040)
-+#define MCF_EDMA_ES_SAE (0x00000080)
-+#define MCF_EDMA_ES_ERRCHN(x) (((x)&0x0000000F)<<8)
-+#define MCF_EDMA_ES_CPE (0x00004000)
-+#define MCF_EDMA_ES_VLD (0x80000000)
-+
-+/* Bit definitions and macros for ERQ */
-+#define MCF_EDMA_ERQ_ERQ0 (0x0001)
-+#define MCF_EDMA_ERQ_ERQ1 (0x0002)
-+#define MCF_EDMA_ERQ_ERQ2 (0x0004)
-+#define MCF_EDMA_ERQ_ERQ3 (0x0008)
-+#define MCF_EDMA_ERQ_ERQ4 (0x0010)
-+#define MCF_EDMA_ERQ_ERQ5 (0x0020)
-+#define MCF_EDMA_ERQ_ERQ6 (0x0040)
-+#define MCF_EDMA_ERQ_ERQ7 (0x0080)
-+#define MCF_EDMA_ERQ_ERQ8 (0x0100)
-+#define MCF_EDMA_ERQ_ERQ9 (0x0200)
-+#define MCF_EDMA_ERQ_ERQ10 (0x0400)
-+#define MCF_EDMA_ERQ_ERQ11 (0x0800)
-+#define MCF_EDMA_ERQ_ERQ12 (0x1000)
-+#define MCF_EDMA_ERQ_ERQ13 (0x2000)
-+#define MCF_EDMA_ERQ_ERQ14 (0x4000)
-+#define MCF_EDMA_ERQ_ERQ15 (0x8000)
-+
-+/* Bit definitions and macros for EEI */
-+#define MCF_EDMA_EEI_EEI0 (0x0001)
-+#define MCF_EDMA_EEI_EEI1 (0x0002)
-+#define MCF_EDMA_EEI_EEI2 (0x0004)
-+#define MCF_EDMA_EEI_EEI3 (0x0008)
-+#define MCF_EDMA_EEI_EEI4 (0x0010)
-+#define MCF_EDMA_EEI_EEI5 (0x0020)
-+#define MCF_EDMA_EEI_EEI6 (0x0040)
-+#define MCF_EDMA_EEI_EEI7 (0x0080)
-+#define MCF_EDMA_EEI_EEI8 (0x0100)
-+#define MCF_EDMA_EEI_EEI9 (0x0200)
-+#define MCF_EDMA_EEI_EEI10 (0x0400)
-+#define MCF_EDMA_EEI_EEI11 (0x0800)
-+#define MCF_EDMA_EEI_EEI12 (0x1000)
-+#define MCF_EDMA_EEI_EEI13 (0x2000)
-+#define MCF_EDMA_EEI_EEI14 (0x4000)
-+#define MCF_EDMA_EEI_EEI15 (0x8000)
-+
-+/* Bit definitions and macros for SERQ */
-+#define MCF_EDMA_SERQ_SERQ(x) (((x)&0x0F))
-+#define MCF_EDMA_SERQ_SAER (0x40)
-+
-+/* Bit definitions and macros for CERQ */
-+#define MCF_EDMA_CERQ_CERQ(x) (((x)&0x0F))
-+#define MCF_EDMA_CERQ_CAER (0x40)
-+
-+/* Bit definitions and macros for SEEI */
-+#define MCF_EDMA_SEEI_SEEI(x) (((x)&0x0F))
-+#define MCF_EDMA_SEEI_SAEE (0x40)
-+
-+/* Bit definitions and macros for CEEI */
-+#define MCF_EDMA_CEEI_CEEI(x) (((x)&0x0F))
-+#define MCF_EDMA_CEEI_CAEE (0x40)
-+
-+/* Bit definitions and macros for CINT */
-+#define MCF_EDMA_CINT_CINT(x) (((x)&0x0F))
-+#define MCF_EDMA_CINT_CAIR (0x40)
-+
-+/* Bit definitions and macros for CERR */
-+#define MCF_EDMA_CERR_CERR(x) (((x)&0x0F))
-+#define MCF_EDMA_CERR_CAER (0x40)
-+
-+/* Bit definitions and macros for SSRT */
-+#define MCF_EDMA_SSRT_SSRT(x) (((x)&0x0F))
-+#define MCF_EDMA_SSRT_SAST (0x40)
-+
-+/* Bit definitions and macros for CDNE */
-+#define MCF_EDMA_CDNE_CDNE(x) (((x)&0x0F))
-+#define MCF_EDMA_CDNE_CADN (0x40)
-+
-+/* Bit definitions and macros for INTR */
-+#define MCF_EDMA_INTR_INT0 (0x0001)
-+#define MCF_EDMA_INTR_INT1 (0x0002)
-+#define MCF_EDMA_INTR_INT2 (0x0004)
-+#define MCF_EDMA_INTR_INT3 (0x0008)
-+#define MCF_EDMA_INTR_INT4 (0x0010)
-+#define MCF_EDMA_INTR_INT5 (0x0020)
-+#define MCF_EDMA_INTR_INT6 (0x0040)
-+#define MCF_EDMA_INTR_INT7 (0x0080)
-+#define MCF_EDMA_INTR_INT8 (0x0100)
-+#define MCF_EDMA_INTR_INT9 (0x0200)
-+#define MCF_EDMA_INTR_INT10 (0x0400)
-+#define MCF_EDMA_INTR_INT11 (0x0800)
-+#define MCF_EDMA_INTR_INT12 (0x1000)
-+#define MCF_EDMA_INTR_INT13 (0x2000)
-+#define MCF_EDMA_INTR_INT14 (0x4000)
-+#define MCF_EDMA_INTR_INT15 (0x8000)
-+
-+/* Bit definitions and macros for ERR */
-+#define MCF_EDMA_ERR_ERR0 (0x0001)
-+#define MCF_EDMA_ERR_ERR1 (0x0002)
-+#define MCF_EDMA_ERR_ERR2 (0x0004)
-+#define MCF_EDMA_ERR_ERR3 (0x0008)
-+#define MCF_EDMA_ERR_ERR4 (0x0010)
-+#define MCF_EDMA_ERR_ERR5 (0x0020)
-+#define MCF_EDMA_ERR_ERR6 (0x0040)
-+#define MCF_EDMA_ERR_ERR7 (0x0080)
-+#define MCF_EDMA_ERR_ERR8 (0x0100)
-+#define MCF_EDMA_ERR_ERR9 (0x0200)
-+#define MCF_EDMA_ERR_ERR10 (0x0400)
-+#define MCF_EDMA_ERR_ERR11 (0x0800)
-+#define MCF_EDMA_ERR_ERR12 (0x1000)
-+#define MCF_EDMA_ERR_ERR13 (0x2000)
-+#define MCF_EDMA_ERR_ERR14 (0x4000)
-+#define MCF_EDMA_ERR_ERR15 (0x8000)
-+
-+/* Bit definitions and macros for DCHPRI group */
-+#define MCF_EDMA_DCHPRI_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI0 */
-+#define MCF_EDMA_DCHPRI0_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI0_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI1 */
-+#define MCF_EDMA_DCHPRI1_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI1_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI2 */
-+#define MCF_EDMA_DCHPRI2_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI2_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI3 */
-+#define MCF_EDMA_DCHPRI3_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI3_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI4 */
-+#define MCF_EDMA_DCHPRI4_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI4_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI5 */
-+#define MCF_EDMA_DCHPRI5_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI5_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI6 */
-+#define MCF_EDMA_DCHPRI6_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI6_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI7 */
-+#define MCF_EDMA_DCHPRI7_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI7_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI8 */
-+#define MCF_EDMA_DCHPRI8_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI8_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI9 */
-+#define MCF_EDMA_DCHPRI9_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI9_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI10 */
-+#define MCF_EDMA_DCHPRI10_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI10_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI11 */
-+#define MCF_EDMA_DCHPRI11_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI11_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI12 */
-+#define MCF_EDMA_DCHPRI12_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI12_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI13 */
-+#define MCF_EDMA_DCHPRI13_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI13_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI14 */
-+#define MCF_EDMA_DCHPRI14_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI14_ECP (0x80)
-+
-+/* Bit definitions and macros for DCHPRI15 */
-+#define MCF_EDMA_DCHPRI15_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI15_ECP (0x80)
-+
-+/* Bit definitions and macros for TCD_SADDR group */
-+#define MCF_EDMA_TCD_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD0_SADDR */
-+#define MCF_EDMA_TCD0_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD_ATTR group */
-+#define MCF_EDMA_TCD_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_8BIT (0x0000)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_16BIT (0x0100)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_32BIT (0x0200)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_16BYTE (0x0400)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_8BIT (0x0000)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_16BIT (0x0001)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_32BIT (0x0002)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_16BYTE (0x0004)
-+
-+/* Bit definitions and macros for TCD0_ATTR */
-+#define MCF_EDMA_TCD0_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD0_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD0_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE_8BIT (0x0000)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE_16BIT (0x0100)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE_32BIT (0x0200)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE_16BYTE (0x0400)
-+#define MCF_EDMA_TCD0_ATTR_DSIZE_8BIT (0x0000)
-+#define MCF_EDMA_TCD0_ATTR_DSIZE_16BIT (0x0001)
-+#define MCF_EDMA_TCD0_ATTR_DSIZE_32BIT (0x0002)
-+#define MCF_EDMA_TCD0_ATTR_DSIZE_16BYTE (0x0004)
-+
-+/* Bit definitions and macros for TCD_SOFF group */
-+#define MCF_EDMA_TCD_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD0_SOFF */
-+#define MCF_EDMA_TCD0_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD_NBYTES group */
-+#define MCF_EDMA_TCD_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD0_NBYTES */
-+#define MCF_EDMA_TCD0_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD_SLAST group */
-+#define MCF_EDMA_TCD_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD0_SLAST */
-+#define MCF_EDMA_TCD0_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD_DADDR group */
-+#define MCF_EDMA_TCD_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD0_DADDR */
-+#define MCF_EDMA_TCD0_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD_CITER_ELINK group */
-+#define MCF_EDMA_TCD_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD0_CITER_ELINK */
-+#define MCF_EDMA_TCD0_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD0_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD0_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD_CITER group */
-+#define MCF_EDMA_TCD_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD0_CITER */
-+#define MCF_EDMA_TCD0_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD0_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD_DOFF group */
-+#define MCF_EDMA_TCD_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD0_DOFF */
-+#define MCF_EDMA_TCD0_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD_DLAST_SGA group */
-+#define MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD0_DLAST_SGA */
-+#define MCF_EDMA_TCD0_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD_BITER_ELINK group */
-+#define MCF_EDMA_TCD_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD0_BITER_ELINK */
-+#define MCF_EDMA_TCD0_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD0_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD0_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD_BITER group */
-+#define MCF_EDMA_TCD_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD0_BITER */
-+#define MCF_EDMA_TCD0_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD0_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD_CSR group */
-+#define MCF_EDMA_TCD_CSR_START (0x0001)
-+#define MCF_EDMA_TCD_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD_CSR_BWC(x) (((x)&0x0003)<<14)
-+#define MCF_EDMA_TCD_CSR_BWC_NO_STALL (0x0000)
-+#define MCF_EDMA_TCD_CSR_BWC_4CYC_STALL (0x8000)
-+#define MCF_EDMA_TCD_CSR_BWC_8CYC_STALL (0xC000)
-+
-+/* Bit definitions and macros for TCD0_CSR */
-+#define MCF_EDMA_TCD0_CSR_START (0x0001)
-+#define MCF_EDMA_TCD0_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD0_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD0_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD0_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD0_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD0_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD0_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD0_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD0_CSR_BWC(x) (((x)&0x0003)<<14)
-+#define MCF_EDMA_TCD0_CSR_BWC_NO_STALL (0x0000)
-+#define MCF_EDMA_TCD0_CSR_BWC_4CYC_STALL (0x8000)
-+#define MCF_EDMA_TCD0_CSR_BWC_8CYC_STALL (0xC000)
-+
-+/* Bit definitions and macros for TCD1_SADDR */
-+#define MCF_EDMA_TCD1_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD1_ATTR */
-+#define MCF_EDMA_TCD1_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD1_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD1_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD1_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD1_SOFF */
-+#define MCF_EDMA_TCD1_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD1_NBYTES */
-+#define MCF_EDMA_TCD1_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD1_SLAST */
-+#define MCF_EDMA_TCD1_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD1_DADDR */
-+#define MCF_EDMA_TCD1_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD1_CITER_ELINK */
-+#define MCF_EDMA_TCD1_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD1_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD1_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD1_CITER */
-+#define MCF_EDMA_TCD1_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD1_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD1_DOFF */
-+#define MCF_EDMA_TCD1_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD1_DLAST_SGA */
-+#define MCF_EDMA_TCD1_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD1_BITER */
-+#define MCF_EDMA_TCD1_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD1_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD1_BITER_ELINK */
-+#define MCF_EDMA_TCD1_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD1_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD1_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD1_CSR */
-+#define MCF_EDMA_TCD1_CSR_START (0x0001)
-+#define MCF_EDMA_TCD1_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD1_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD1_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD1_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD1_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD1_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD1_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD1_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD1_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD2_SADDR */
-+#define MCF_EDMA_TCD2_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD2_ATTR */
-+#define MCF_EDMA_TCD2_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD2_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD2_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD2_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD2_SOFF */
-+#define MCF_EDMA_TCD2_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD2_NBYTES */
-+#define MCF_EDMA_TCD2_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD2_SLAST */
-+#define MCF_EDMA_TCD2_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD2_DADDR */
-+#define MCF_EDMA_TCD2_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD2_CITER */
-+#define MCF_EDMA_TCD2_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD2_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD2_CITER_ELINK */
-+#define MCF_EDMA_TCD2_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD2_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD2_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD2_DOFF */
-+#define MCF_EDMA_TCD2_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD2_DLAST_SGA */
-+#define MCF_EDMA_TCD2_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD2_BITER_ELINK */
-+#define MCF_EDMA_TCD2_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD2_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD2_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD2_BITER */
-+#define MCF_EDMA_TCD2_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD2_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD2_CSR */
-+#define MCF_EDMA_TCD2_CSR_START (0x0001)
-+#define MCF_EDMA_TCD2_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD2_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD2_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD2_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD2_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD2_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD2_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD2_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD2_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD3_SADDR */
-+#define MCF_EDMA_TCD3_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD3_ATTR */
-+#define MCF_EDMA_TCD3_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD3_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD3_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD3_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD3_SOFF */
-+#define MCF_EDMA_TCD3_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD3_NBYTES */
-+#define MCF_EDMA_TCD3_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD3_SLAST */
-+#define MCF_EDMA_TCD3_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD3_DADDR */
-+#define MCF_EDMA_TCD3_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD3_CITER */
-+#define MCF_EDMA_TCD3_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD3_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD3_CITER_ELINK */
-+#define MCF_EDMA_TCD3_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD3_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD3_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD3_DOFF */
-+#define MCF_EDMA_TCD3_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD3_DLAST_SGA */
-+#define MCF_EDMA_TCD3_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD3_BITER_ELINK */
-+#define MCF_EDMA_TCD3_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD3_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD3_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD3_BITER */
-+#define MCF_EDMA_TCD3_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD3_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD3_CSR */
-+#define MCF_EDMA_TCD3_CSR_START (0x0001)
-+#define MCF_EDMA_TCD3_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD3_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD3_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD3_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD3_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD3_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD3_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD3_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD3_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD4_SADDR */
-+#define MCF_EDMA_TCD4_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD4_ATTR */
-+#define MCF_EDMA_TCD4_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD4_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD4_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD4_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD4_SOFF */
-+#define MCF_EDMA_TCD4_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD4_NBYTES */
-+#define MCF_EDMA_TCD4_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD4_SLAST */
-+#define MCF_EDMA_TCD4_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD4_DADDR */
-+#define MCF_EDMA_TCD4_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD4_CITER */
-+#define MCF_EDMA_TCD4_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD4_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD4_CITER_ELINK */
-+#define MCF_EDMA_TCD4_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD4_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD4_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD4_DOFF */
-+#define MCF_EDMA_TCD4_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD4_DLAST_SGA */
-+#define MCF_EDMA_TCD4_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD4_BITER */
-+#define MCF_EDMA_TCD4_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD4_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD4_BITER_ELINK */
-+#define MCF_EDMA_TCD4_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD4_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD4_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD4_CSR */
-+#define MCF_EDMA_TCD4_CSR_START (0x0001)
-+#define MCF_EDMA_TCD4_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD4_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD4_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD4_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD4_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD4_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD4_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD4_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD4_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD5_SADDR */
-+#define MCF_EDMA_TCD5_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD5_ATTR */
-+#define MCF_EDMA_TCD5_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD5_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD5_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD5_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD5_SOFF */
-+#define MCF_EDMA_TCD5_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD5_NBYTES */
-+#define MCF_EDMA_TCD5_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD5_SLAST */
-+#define MCF_EDMA_TCD5_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD5_DADDR */
-+#define MCF_EDMA_TCD5_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD5_CITER */
-+#define MCF_EDMA_TCD5_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD5_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD5_CITER_ELINK */
-+#define MCF_EDMA_TCD5_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD5_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD5_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD5_DOFF */
-+#define MCF_EDMA_TCD5_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD5_DLAST_SGA */
-+#define MCF_EDMA_TCD5_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD5_BITER_ELINK */
-+#define MCF_EDMA_TCD5_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD5_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD5_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD5_BITER */
-+#define MCF_EDMA_TCD5_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD5_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD5_CSR */
-+#define MCF_EDMA_TCD5_CSR_START (0x0001)
-+#define MCF_EDMA_TCD5_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD5_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD5_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD5_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD5_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD5_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD5_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD5_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD5_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD6_SADDR */
-+#define MCF_EDMA_TCD6_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD6_ATTR */
-+#define MCF_EDMA_TCD6_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD6_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD6_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD6_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD6_SOFF */
-+#define MCF_EDMA_TCD6_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD6_NBYTES */
-+#define MCF_EDMA_TCD6_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD6_SLAST */
-+#define MCF_EDMA_TCD6_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD6_DADDR */
-+#define MCF_EDMA_TCD6_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD6_CITER */
-+#define MCF_EDMA_TCD6_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD6_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD6_CITER_ELINK */
-+#define MCF_EDMA_TCD6_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD6_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD6_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD6_DOFF */
-+#define MCF_EDMA_TCD6_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD6_DLAST_SGA */
-+#define MCF_EDMA_TCD6_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD6_BITER_ELINK */
-+#define MCF_EDMA_TCD6_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD6_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD6_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD6_BITER */
-+#define MCF_EDMA_TCD6_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD6_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD6_CSR */
-+#define MCF_EDMA_TCD6_CSR_START (0x0001)
-+#define MCF_EDMA_TCD6_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD6_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD6_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD6_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD6_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD6_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD6_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD6_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD6_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD7_SADDR */
-+#define MCF_EDMA_TCD7_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD7_ATTR */
-+#define MCF_EDMA_TCD7_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD7_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD7_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD7_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD7_SOFF */
-+#define MCF_EDMA_TCD7_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD7_NBYTES */
-+#define MCF_EDMA_TCD7_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD7_SLAST */
-+#define MCF_EDMA_TCD7_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD7_DADDR */
-+#define MCF_EDMA_TCD7_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD7_CITER */
-+#define MCF_EDMA_TCD7_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD7_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD7_CITER_ELINK */
-+#define MCF_EDMA_TCD7_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD7_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD7_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD7_DOFF */
-+#define MCF_EDMA_TCD7_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD7_DLAST_SGA */
-+#define MCF_EDMA_TCD7_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD7_BITER_ELINK */
-+#define MCF_EDMA_TCD7_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD7_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD7_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD7_BITER */
-+#define MCF_EDMA_TCD7_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD7_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD7_CSR */
-+#define MCF_EDMA_TCD7_CSR_START (0x0001)
-+#define MCF_EDMA_TCD7_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD7_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD7_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD7_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD7_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD7_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD7_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD7_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD7_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD8_SADDR */
-+#define MCF_EDMA_TCD8_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD8_ATTR */
-+#define MCF_EDMA_TCD8_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD8_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD8_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD8_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD8_SOFF */
-+#define MCF_EDMA_TCD8_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD8_NBYTES */
-+#define MCF_EDMA_TCD8_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD8_SLAST */
-+#define MCF_EDMA_TCD8_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD8_DADDR */
-+#define MCF_EDMA_TCD8_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD8_CITER */
-+#define MCF_EDMA_TCD8_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD8_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD8_CITER_ELINK */
-+#define MCF_EDMA_TCD8_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD8_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD8_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD8_DOFF */
-+#define MCF_EDMA_TCD8_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD8_DLAST_SGA */
-+#define MCF_EDMA_TCD8_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD8_BITER_ELINK */
-+#define MCF_EDMA_TCD8_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD8_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD8_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD8_BITER */
-+#define MCF_EDMA_TCD8_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD8_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD8_CSR */
-+#define MCF_EDMA_TCD8_CSR_START (0x0001)
-+#define MCF_EDMA_TCD8_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD8_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD8_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD8_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD8_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD8_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD8_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD8_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD8_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD9_SADDR */
-+#define MCF_EDMA_TCD9_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD9_ATTR */
-+#define MCF_EDMA_TCD9_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD9_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD9_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD9_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD9_SOFF */
-+#define MCF_EDMA_TCD9_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD9_NBYTES */
-+#define MCF_EDMA_TCD9_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD9_SLAST */
-+#define MCF_EDMA_TCD9_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD9_DADDR */
-+#define MCF_EDMA_TCD9_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD9_CITER_ELINK */
-+#define MCF_EDMA_TCD9_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD9_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD9_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD9_CITER */
-+#define MCF_EDMA_TCD9_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD9_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD9_DOFF */
-+#define MCF_EDMA_TCD9_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD9_DLAST_SGA */
-+#define MCF_EDMA_TCD9_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD9_BITER_ELINK */
-+#define MCF_EDMA_TCD9_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD9_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD9_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD9_BITER */
-+#define MCF_EDMA_TCD9_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD9_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD9_CSR */
-+#define MCF_EDMA_TCD9_CSR_START (0x0001)
-+#define MCF_EDMA_TCD9_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD9_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD9_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD9_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD9_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD9_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD9_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD9_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD9_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD10_SADDR */
-+#define MCF_EDMA_TCD10_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD10_ATTR */
-+#define MCF_EDMA_TCD10_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD10_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD10_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD10_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD10_SOFF */
-+#define MCF_EDMA_TCD10_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD10_NBYTES */
-+#define MCF_EDMA_TCD10_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD10_SLAST */
-+#define MCF_EDMA_TCD10_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD10_DADDR */
-+#define MCF_EDMA_TCD10_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD10_CITER_ELINK */
-+#define MCF_EDMA_TCD10_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD10_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD10_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD10_CITER */
-+#define MCF_EDMA_TCD10_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD10_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD10_DOFF */
-+#define MCF_EDMA_TCD10_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD10_DLAST_SGA */
-+#define MCF_EDMA_TCD10_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD10_BITER */
-+#define MCF_EDMA_TCD10_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD10_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD10_BITER_ELINK */
-+#define MCF_EDMA_TCD10_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD10_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD10_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD10_CSR */
-+#define MCF_EDMA_TCD10_CSR_START (0x0001)
-+#define MCF_EDMA_TCD10_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD10_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD10_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD10_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD10_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD10_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD10_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD10_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD10_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD11_SADDR */
-+#define MCF_EDMA_TCD11_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD11_ATTR */
-+#define MCF_EDMA_TCD11_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD11_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD11_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD11_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD11_SOFF */
-+#define MCF_EDMA_TCD11_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD11_NBYTES */
-+#define MCF_EDMA_TCD11_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD11_SLAST */
-+#define MCF_EDMA_TCD11_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD11_DADDR */
-+#define MCF_EDMA_TCD11_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD11_CITER */
-+#define MCF_EDMA_TCD11_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD11_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD11_CITER_ELINK */
-+#define MCF_EDMA_TCD11_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD11_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD11_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD11_DOFF */
-+#define MCF_EDMA_TCD11_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD11_DLAST_SGA */
-+#define MCF_EDMA_TCD11_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD11_BITER */
-+#define MCF_EDMA_TCD11_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD11_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD11_BITER_ELINK */
-+#define MCF_EDMA_TCD11_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD11_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD11_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD11_CSR */
-+#define MCF_EDMA_TCD11_CSR_START (0x0001)
-+#define MCF_EDMA_TCD11_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD11_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD11_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD11_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD11_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD11_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD11_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD11_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD11_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD12_SADDR */
-+#define MCF_EDMA_TCD12_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD12_ATTR */
-+#define MCF_EDMA_TCD12_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD12_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD12_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD12_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD12_SOFF */
-+#define MCF_EDMA_TCD12_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD12_NBYTES */
-+#define MCF_EDMA_TCD12_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD12_SLAST */
-+#define MCF_EDMA_TCD12_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD12_DADDR */
-+#define MCF_EDMA_TCD12_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD12_CITER */
-+#define MCF_EDMA_TCD12_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD12_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD12_CITER_ELINK */
-+#define MCF_EDMA_TCD12_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD12_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD12_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD12_DOFF */
-+#define MCF_EDMA_TCD12_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD12_DLAST_SGA */
-+#define MCF_EDMA_TCD12_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD12_BITER */
-+#define MCF_EDMA_TCD12_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD12_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD12_BITER_ELINK */
-+#define MCF_EDMA_TCD12_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD12_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD12_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD12_CSR */
-+#define MCF_EDMA_TCD12_CSR_START (0x0001)
-+#define MCF_EDMA_TCD12_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD12_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD12_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD12_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD12_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD12_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD12_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD12_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD12_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD13_SADDR */
-+#define MCF_EDMA_TCD13_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD13_ATTR */
-+#define MCF_EDMA_TCD13_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD13_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD13_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD13_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD13_SOFF */
-+#define MCF_EDMA_TCD13_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD13_NBYTES */
-+#define MCF_EDMA_TCD13_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD13_SLAST */
-+#define MCF_EDMA_TCD13_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD13_DADDR */
-+#define MCF_EDMA_TCD13_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD13_CITER_ELINK */
-+#define MCF_EDMA_TCD13_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD13_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD13_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD13_CITER */
-+#define MCF_EDMA_TCD13_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD13_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD13_DOFF */
-+#define MCF_EDMA_TCD13_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD13_DLAST_SGA */
-+#define MCF_EDMA_TCD13_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD13_BITER_ELINK */
-+#define MCF_EDMA_TCD13_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD13_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD13_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD13_BITER */
-+#define MCF_EDMA_TCD13_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD13_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD13_CSR */
-+#define MCF_EDMA_TCD13_CSR_START (0x0001)
-+#define MCF_EDMA_TCD13_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD13_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD13_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD13_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD13_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD13_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD13_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD13_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD13_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD14_SADDR */
-+#define MCF_EDMA_TCD14_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD14_ATTR */
-+#define MCF_EDMA_TCD14_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD14_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD14_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD14_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD14_SOFF */
-+#define MCF_EDMA_TCD14_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD14_NBYTES */
-+#define MCF_EDMA_TCD14_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD14_SLAST */
-+#define MCF_EDMA_TCD14_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD14_DADDR */
-+#define MCF_EDMA_TCD14_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD14_CITER */
-+#define MCF_EDMA_TCD14_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD14_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD14_CITER_ELINK */
-+#define MCF_EDMA_TCD14_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD14_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD14_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD14_DOFF */
-+#define MCF_EDMA_TCD14_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD14_DLAST_SGA */
-+#define MCF_EDMA_TCD14_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD14_BITER_ELINK */
-+#define MCF_EDMA_TCD14_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD14_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD14_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD14_BITER */
-+#define MCF_EDMA_TCD14_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD14_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD14_CSR */
-+#define MCF_EDMA_TCD14_CSR_START (0x0001)
-+#define MCF_EDMA_TCD14_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD14_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD14_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD14_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD14_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD14_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD14_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD14_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD14_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD15_SADDR */
-+#define MCF_EDMA_TCD15_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD15_ATTR */
-+#define MCF_EDMA_TCD15_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD15_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD15_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD15_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD15_SOFF */
-+#define MCF_EDMA_TCD15_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD15_NBYTES */
-+#define MCF_EDMA_TCD15_NBYTES_NBYTES(x) (x)
-+
-+/* Bit definitions and macros for TCD15_SLAST */
-+#define MCF_EDMA_TCD15_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD15_DADDR */
-+#define MCF_EDMA_TCD15_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD15_CITER_ELINK */
-+#define MCF_EDMA_TCD15_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD15_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD15_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD15_CITER */
-+#define MCF_EDMA_TCD15_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD15_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD15_DOFF */
-+#define MCF_EDMA_TCD15_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD15_DLAST_SGA */
-+#define MCF_EDMA_TCD15_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD15_BITER */
-+#define MCF_EDMA_TCD15_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD15_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD15_BITER_ELINK */
-+#define MCF_EDMA_TCD15_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD15_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD15_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD15_CSR */
-+#define MCF_EDMA_TCD15_CSR_START (0x0001)
-+#define MCF_EDMA_TCD15_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD15_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD15_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD15_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD15_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD15_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD15_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD15_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD15_CSR_BWC(x) (((x)&0x0003)<<14)
-+
-+#endif /* __MCF5445X_EDMA_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_eport.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_EPORT_H__
-+#define __MCF5445X_EPORT_H__
-+
-+/*********************************************************************
-+*
-+* Edge Port Module (EPORT)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000)
-+#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002)
-+#define MCF_EPORT_EPIER MCF_REG08(0xFC094003)
-+#define MCF_EPORT_EPDR MCF_REG08(0xFC094004)
-+#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005)
-+#define MCF_EPORT_EPFR MCF_REG08(0xFC094006)
-+
-+/* Bit definitions and macros for EPPAR */
-+#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
-+#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4)
-+#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6)
-+#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8)
-+#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10)
-+#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12)
-+#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14)
-+#define MCF_EPORT_EPPAR_LEVEL (0)
-+#define MCF_EPORT_EPPAR_RISING (1)
-+#define MCF_EPORT_EPPAR_FALLING (2)
-+#define MCF_EPORT_EPPAR_BOTH (3)
-+#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000)
-+#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000)
-+#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000)
-+#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000)
-+#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000)
-+#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000)
-+#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400)
-+#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800)
-+#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00)
-+#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100)
-+#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200)
-+#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300)
-+#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040)
-+#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080)
-+#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0)
-+#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010)
-+#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020)
-+#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030)
-+#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004)
-+#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008)
-+#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C)
-+
-+/* Bit definitions and macros for EPDDR */
-+#define MCF_EPORT_EPDDR_EPDD1 (0x02)
-+#define MCF_EPORT_EPDDR_EPDD2 (0x04)
-+#define MCF_EPORT_EPDDR_EPDD3 (0x08)
-+#define MCF_EPORT_EPDDR_EPDD4 (0x10)
-+#define MCF_EPORT_EPDDR_EPDD5 (0x20)
-+#define MCF_EPORT_EPDDR_EPDD6 (0x40)
-+#define MCF_EPORT_EPDDR_EPDD7 (0x80)
-+
-+/* Bit definitions and macros for EPIER */
-+#define MCF_EPORT_EPIER_EPIE1 (0x02)
-+#define MCF_EPORT_EPIER_EPIE2 (0x04)
-+#define MCF_EPORT_EPIER_EPIE3 (0x08)
-+#define MCF_EPORT_EPIER_EPIE4 (0x10)
-+#define MCF_EPORT_EPIER_EPIE5 (0x20)
-+#define MCF_EPORT_EPIER_EPIE6 (0x40)
-+#define MCF_EPORT_EPIER_EPIE7 (0x80)
-+
-+/* Bit definitions and macros for EPDR */
-+#define MCF_EPORT_EPDR_EPD1 (0x02)
-+#define MCF_EPORT_EPDR_EPD2 (0x04)
-+#define MCF_EPORT_EPDR_EPD3 (0x08)
-+#define MCF_EPORT_EPDR_EPD4 (0x10)
-+#define MCF_EPORT_EPDR_EPD5 (0x20)
-+#define MCF_EPORT_EPDR_EPD6 (0x40)
-+#define MCF_EPORT_EPDR_EPD7 (0x80)
-+
-+/* Bit definitions and macros for EPPDR */
-+#define MCF_EPORT_EPPDR_EPPD1 (0x02)
-+#define MCF_EPORT_EPPDR_EPPD2 (0x04)
-+#define MCF_EPORT_EPPDR_EPPD3 (0x08)
-+#define MCF_EPORT_EPPDR_EPPD4 (0x10)
-+#define MCF_EPORT_EPPDR_EPPD5 (0x20)
-+#define MCF_EPORT_EPPDR_EPPD6 (0x40)
-+#define MCF_EPORT_EPPDR_EPPD7 (0x80)
-+
-+/* Bit definitions and macros for EPFR */
-+#define MCF_EPORT_EPFR_EPF1 (0x02)
-+#define MCF_EPORT_EPFR_EPF2 (0x04)
-+#define MCF_EPORT_EPFR_EPF3 (0x08)
-+#define MCF_EPORT_EPFR_EPF4 (0x10)
-+#define MCF_EPORT_EPFR_EPF5 (0x20)
-+#define MCF_EPORT_EPFR_EPF6 (0x40)
-+#define MCF_EPORT_EPFR_EPF7 (0x80)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_EPORT_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_fbcs.h
-@@ -0,0 +1,200 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_FBCS_H__
-+#define __MCF5445X_FBCS_H__
-+
-+/*********************************************************************
-+*
-+* FlexBus Chip Selects (FBCS)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_FBCS_CSAR0 MCF_REG32(0xFC008000) /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR0 MCF_REG32(0xFC008004) /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR0 MCF_REG32(0xFC008008) /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR1 MCF_REG32(0xFC00800C) /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR1 MCF_REG32(0xFC008010) /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR1 MCF_REG32(0xFC008014) /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR2 MCF_REG32(0xFC008018) /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR2 MCF_REG32(0xFC00801C) /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR2 MCF_REG32(0xFC008020) /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR3 MCF_REG32(0xFC008024) /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR3 MCF_REG32(0xFC008028) /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR3 MCF_REG32(0xFC00802C) /* Chip-select Cntl Register */
-+
-+/* Parameterized register read/write macros for multiple registers */
-+/* Chip-select Addr Register */
-+#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C))
-+/* Chip-select Mask Register */
-+#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C))
-+/* Chip-select Cntl Register */
-+#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C))
-+
-+/* Bit definitions and macros for CSAR group */
-+#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000)
-+
-+/* Bit definitions and macros for CSAR0 */
-+#define MCF_FBCS_CSAR0_BA(x) ((x)&0xFFFF0000)
-+
-+/* Bit definitions and macros for CSMR group */
-+#define MCF_FBCS_CSMR_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base addr mask */
-+#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000)
-+#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000)
-+#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000)
-+#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000)
-+#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000)
-+#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000)
-+#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000)
-+#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000)
-+#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000)
-+#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000)
-+#define MCF_FBCS_CSMR_BAM_8M (0x007F0000)
-+#define MCF_FBCS_CSMR_BAM_4M (0x003F0000)
-+#define MCF_FBCS_CSMR_BAM_2M (0x001F0000)
-+#define MCF_FBCS_CSMR_BAM_1M (0x000F0000)
-+#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000)
-+#define MCF_FBCS_CSMR_BAM_512K (0x00070000)
-+#define MCF_FBCS_CSMR_BAM_256K (0x00030000)
-+#define MCF_FBCS_CSMR_BAM_128K (0x00010000)
-+#define MCF_FBCS_CSMR_BAM_64K (0x00000000)
-+
-+/* Bit definitions and macros for CSMR0 */
-+#define MCF_FBCS_CSMR0_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR0_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR0_BAM(x) (((x)&0x0000FFFF)<<16) /* Base addr mask */
-+#define MCF_FBCS_CSMR0_BAM_4G (0xFFFF0000)
-+#define MCF_FBCS_CSMR0_BAM_2G (0x7FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_1G (0x3FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_1024M (0x3FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_512M (0x1FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_256M (0x0FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_128M (0x07FF0000)
-+#define MCF_FBCS_CSMR0_BAM_64M (0x03FF0000)
-+#define MCF_FBCS_CSMR0_BAM_32M (0x01FF0000)
-+#define MCF_FBCS_CSMR0_BAM_16M (0x00FF0000)
-+#define MCF_FBCS_CSMR0_BAM_8M (0x007F0000)
-+#define MCF_FBCS_CSMR0_BAM_4M (0x003F0000)
-+#define MCF_FBCS_CSMR0_BAM_2M (0x001F0000)
-+#define MCF_FBCS_CSMR0_BAM_1M (0x000F0000)
-+#define MCF_FBCS_CSMR0_BAM_1024K (0x000F0000)
-+#define MCF_FBCS_CSMR0_BAM_512K (0x00070000)
-+#define MCF_FBCS_CSMR0_BAM_256K (0x00030000)
-+#define MCF_FBCS_CSMR0_BAM_128K (0x00010000)
-+#define MCF_FBCS_CSMR0_BAM_64K (0x00000000)
-+
-+/* Bit definitions and macros for CSCR group */
-+#define MCF_FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+#define MCF_FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26)
-+#define MCF_FBCS_CSCR_PS_8 (0x00000040)
-+#define MCF_FBCS_CSCR_PS_16 (0x00000080)
-+#define MCF_FBCS_CSCR_PS_32 (0x00000000)
-+
-+/* Bit definitions and macros for CSCR0 */
-+#define MCF_FBCS_CSCR0_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR0_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR0_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR0_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR0_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR0_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR0_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR0_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR0_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+#define MCF_FBCS_CSCR0_SWSEN (0x00800000) /* Secondary wait state enable */
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR0_SWS(x) (((x)&0x0000003F)<<26)
-+#define MCF_FBCS_CSCR0_PS_8 (0x00000040)
-+#define MCF_FBCS_CSCR0_PS_16 (0x00000080)
-+#define MCF_FBCS_CSCR0_PS_32 (0x00000000)
-+
-+/* Bit definitions and macros for CSMR1 */
-+#define MCF_FBCS_CSMR1_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR1_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR1_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR1 */
-+#define MCF_FBCS_CSCR1_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR1_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR1_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR1_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR1_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR1_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR1_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR1_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR1_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+#define MCF_FBCS_CSCR1_SWSEN (0x00800000) /* Secondary wait state enable */
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR1_SWS(x) (((x)&0x0000003F)<<26)
-+
-+/* Bit definitions and macros for CSMR2 */
-+#define MCF_FBCS_CSMR2_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR2_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR2_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR2 */
-+#define MCF_FBCS_CSCR2_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR2_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR2_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR2_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR2_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR2_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR2_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR2_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR2_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+#define MCF_FBCS_CSCR2_SWSEN (0x00800000) /* Secondary wait state enable */
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR2_SWS(x) (((x)&0x0000003F)<<26)
-+
-+/* Bit definitions and macros for CSMR3 */
-+#define MCF_FBCS_CSMR3_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR3_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR3_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR3 */
-+#define MCF_FBCS_CSCR3_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR3_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR3_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR3_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR3_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR3_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR3_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR3_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR3_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+#define MCF_FBCS_CSCR3_SWSEN (0x00800000) /* Secondary wait state enable */
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR3_SWS(x) (((x)&0x0000003F)<<26)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_FBCS_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_gpio.h
-@@ -0,0 +1,1411 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_GPIO_H__
-+#define __MCF5445X_GPIO_H__
-+
-+/*********************************************************************
-+*
-+* General Purpose I/O Module (GPIO)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_GPIO_PODR_FEC0H \
-+ MCF_REG08(0xFC0A4000) /* FEC0 High Port Output Data Register */
-+#define MCF_GPIO_PODR_FEC0L \
-+ MCF_REG08(0xFC0A4001) /* FEC0 Low Port Output Data Register */
-+#define MCF_GPIO_PODR_SSI \
-+ MCF_REG08(0xFC0A4002) /* SSI Port Output Data Register */
-+#define MCF_GPIO_PODR_FBCTL \
-+ MCF_REG08(0xFC0A4003) /* Flexbus Control Port Output Data Register */
-+/* Flexbus Byte Enable Port Output Data Register */
-+#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004)
-+/* Flexbus Chip-Select Port Output Data Register */
-+#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005)
-+#define MCF_GPIO_PODR_DMA \
-+ MCF_REG08(0xFC0A4006) /* DMA Port Output Data Register */
-+#define MCF_GPIO_PODR_FECI2C \
-+ MCF_REG08(0xFC0A4007) /* FEC1 / I2C Port Output Data Register */
-+#define MCF_GPIO_PODR_UART \
-+ MCF_REG08(0xFC0A4009) /* UART Port Output Data Register */
-+#define MCF_GPIO_PODR_DSPI \
-+ MCF_REG08(0xFC0A400A) /* DSPI Port Output Data Register */
-+#define MCF_GPIO_PODR_TIMER \
-+ MCF_REG08(0xFC0A400B) /* Timer Port Output Data Register */
-+#define MCF_GPIO_PODR_PCI \
-+ MCF_REG08(0xFC0A400C) /* PCI Port Output Data Register */
-+#define MCF_GPIO_PODR_USB \
-+ MCF_REG08(0xFC0A400D) /* USB Port Output Data Register */
-+#define MCF_GPIO_PODR_ATAH \
-+ MCF_REG08(0xFC0A400E) /* ATA High Port Output Data Register */
-+#define MCF_GPIO_PODR_ATAL \
-+ MCF_REG08(0xFC0A400F) /* ATA Low Port Output Data Register */
-+#define MCF_GPIO_PODR_FEC1H \
-+ MCF_REG08(0xFC0A4010) /* FEC1 High Port Output Data Register */
-+#define MCF_GPIO_PODR_FEC1L \
-+ MCF_REG08(0xFC0A4011) /* FEC1 Low Port Output Data Register */
-+#define MCF_GPIO_PODR_FBADH \
-+ MCF_REG08(0xFC0A4014) /* Flexbus AD High Port Output Data Register */
-+/* Flexbus AD Med-High Port Output Data Register */
-+#define MCF_GPIO_PODR_FBADMH MCF_REG08(0xFC0A4015)
-+/* Flexbus AD Med-Low Port Output Data Register */
-+#define MCF_GPIO_PODR_FBADML MCF_REG08(0xFC0A4016)
-+#define MCF_GPIO_PODR_FBADL \
-+ MCF_REG08(0xFC0A4017) /* Flexbus AD Low Port Output Data Register */
-+#define MCF_GPIO_PDDR_FEC0H \
-+ MCF_REG08(0xFC0A4018) /* FEC0 High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FEC0L \
-+ MCF_REG08(0xFC0A4019) /* FEC0 Low Port Data Direction Register */
-+#define MCF_GPIO_PDDR_SSI \
-+ MCF_REG08(0xFC0A401A) /* SSI Port Data Direction Register */
-+/* Flexbus Control Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBCTL MCF_REG08(0xFC0A401B)
-+/* Flexbus Byte Enable Port Data Direction Register */
-+#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A401C)
-+/* Flexbus Chip-Select Port Data Direction Register */
-+#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A401D)
-+#define MCF_GPIO_PDDR_DMA \
-+ MCF_REG08(0xFC0A401E) /* DMA Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FECI2C \
-+ MCF_REG08(0xFC0A401F) /* FEC1 / I2C Port Data Direction Register */
-+#define MCF_GPIO_PDDR_UART \
-+ MCF_REG08(0xFC0A4021) /* UART Port Data Direction Register */
-+#define MCF_GPIO_PDDR_DSPI \
-+ MCF_REG08(0xFC0A4022) /* DSPI Port Data Direction Register */
-+#define MCF_GPIO_PDDR_TIMER \
-+ MCF_REG08(0xFC0A4023) /* Timer Port Data Direction Register */
-+#define MCF_GPIO_PDDR_PCI \
-+ MCF_REG08(0xFC0A4024) /* PCI Port Data Direction Register */
-+#define MCF_GPIO_PDDR_USB \
-+ MCF_REG08(0xFC0A4025) /* USB Port Data Direction Register */
-+#define MCF_GPIO_PDDR_ATAH \
-+ MCF_REG08(0xFC0A4026) /* ATA High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_ATAL \
-+ MCF_REG08(0xFC0A4027) /* ATA Low Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FEC1H \
-+ MCF_REG08(0xFC0A4028) /* FEC1 High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FEC1L \
-+ MCF_REG08(0xFC0A4029) /* FEC1 Low Port Data Direction Register */
-+/* Flexbus AD High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBADH MCF_REG08(0xFC0A402C)
-+/* Flexbus AD Med-High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBADMH MCF_REG08(0xFC0A402D)
-+/* Flexbus AD Med-Low Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBADML MCF_REG08(0xFC0A402E)
-+/* Flexbus AD Low Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBADL MCF_REG08(0xFC0A402F)
-+#define MCF_GPIO_PPDSDR_FEC0H \
-+ MCF_REG08(0xFC0A4030) /* FEC0 High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FEC0L \
-+ MCF_REG08(0xFC0A4031) /* FEC0 Low Port Clear Output Data Register */
-+#define MCF_GPIO_PPDSDR_SSI \
-+ MCF_REG08(0xFC0A4032) /* SSI Port Pin Data/Set Data Register */
-+/* Flexbus Control Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBCTL MCF_REG08(0xFC0A4033)
-+/* Flexbus Byte Enable Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A4034)
-+/* Flexbus Chip-Select Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A4035)
-+#define MCF_GPIO_PPDSDR_DMA \
-+ MCF_REG08(0xFC0A4036) /* DMA Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FECI2C \
-+ MCF_REG08(0xFC0A4037) /* FEC1 / I2C Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_UART \
-+ MCF_REG08(0xFC0A4039) /* UART Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_DSPI \
-+ MCF_REG08(0xFC0A403A) /* DSPI Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_TIMER \
-+ MCF_REG08(0xFC0A403B) /* FTimer Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_PCI \
-+ MCF_REG08(0xFC0A403C) /* PCI Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_USB \
-+ MCF_REG08(0xFC0A403D) /* USB Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_ATAH \
-+ MCF_REG08(0xFC0A403E) /* ATA High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_ATAL \
-+ MCF_REG08(0xFC0A403F) /* ATA Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FEC1H \
-+ MCF_REG08(0xFC0A4040) /* FEC1 High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FEC1L \
-+ MCF_REG08(0xFC0A4041) /* FEC1 Low Port Pin Data/Set Data Register */
-+/* Flexbus AD High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBADH MCF_REG08(0xFC0A4044)
-+/* Flexbus AD Med-High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBADMH MCF_REG08(0xFC0A4045)
-+/* Flexbus AD Med-Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBADML MCF_REG08(0xFC0A4046)
-+/* Flexbus AD Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBADL MCF_REG08(0xFC0A4047)
-+#define MCF_GPIO_PCLRR_FEC0H \
-+ MCF_REG08(0xFC0A4048) /* FEC0 High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FEC0L \
-+ MCF_REG08(0xFC0A4049) /* FEC0 Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PCLRR_SSI \
-+ MCF_REG08(0xFC0A404A) /* SSI Port Clear Output Data Register */
-+/* Flexbus Control Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBCTL MCF_REG08(0xFC0A404B)
-+/* Flexbus Byte Enable Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A404C)
-+/* Flexbus Chip-Select Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A404D)
-+#define MCF_GPIO_PCLRR_DMA \
-+ MCF_REG08(0xFC0A404E) /* DMA Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FECI2C \
-+ MCF_REG08(0xFC0A404F) /* FEC1 / I2C Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_UART \
-+ MCF_REG08(0xFC0A4051) /* UART Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_DSPI \
-+ MCF_REG08(0xFC0A4052) /* DSPI Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_TIMER \
-+ MCF_REG08(0xFC0A4053) /* Timer Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_PCI \
-+ MCF_REG08(0xFC0A4054) /* PCI Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_USB \
-+ MCF_REG08(0xFC0A4055) /* USB Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_ATAH \
-+ MCF_REG08(0xFC0A4056) /* ATA High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_ATAL \
-+ MCF_REG08(0xFC0A4057) /* ATA Low Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FEC1H \
-+ MCF_REG08(0xFC0A4058) /* FEC1 High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FEC1L \
-+ MCF_REG08(0xFC0A4059) /* FEC1 Low Port Clear Output Data Register */
-+/* Flexbus AD High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBADH MCF_REG08(0xFC0A405C)
-+/* Flexbus AD Med-High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBADMH MCF_REG08(0xFC0A405D)
-+/* Flexbus AD Med-Low Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBADML MCF_REG08(0xFC0A405E)
-+/* Flexbus AD Low Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBADL MCF_REG08(0xFC0A405F)
-+#define MCF_GPIO_PAR_FEC \
-+ MCF_REG08(0xFC0A4060) /* FEC Pin Assignment Register */
-+#define MCF_GPIO_PAR_DMA \
-+ MCF_REG08(0xFC0A4061) /* DMA Pin Assignment Register */
-+#define MCF_GPIO_PAR_FBCTL \
-+ MCF_REG08(0xFC0A4062) /* Flexbus Control Pin Assignment Register */
-+#define MCF_GPIO_PAR_DSPI \
-+ MCF_REG08(0xFC0A4063) /* DSPI Pin Assignment Register */
-+/* Flexbus Byte-Enable Pin Assignment Register */
-+#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4064)
-+/* Flexbus Chip-Select Pin Assignment Register */
-+#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4065)
-+#define MCF_GPIO_PAR_TIMER \
-+ MCF_REG08(0xFC0A4066) /* Time Pin Assignment Register */
-+#define MCF_GPIO_PAR_USB \
-+ MCF_REG08(0xFC0A4067) /* USB Pin Assignment Register */
-+#define MCF_GPIO_PAR_UART \
-+ MCF_REG08(0xFC0A4069) /* UART Pin Assignment Register */
-+#define MCF_GPIO_PAR_FECI2C \
-+ MCF_REG16(0xFC0A406A) /* FEC / I2C Pin Assignment Register */
-+#define MCF_GPIO_PAR_SSI \
-+ MCF_REG16(0xFC0A406C) /* SSI Pin Assignment Register */
-+#define MCF_GPIO_PAR_ATA \
-+ MCF_REG16(0xFC0A406E) /* ATA Pin Assignment Register */
-+#define MCF_GPIO_PAR_IRQ \
-+ MCF_REG08(0xFC0A4070) /* IRQ Pin Assignment Register */
-+#define MCF_GPIO_PAR_PCI \
-+ MCF_REG16(0xFC0A4072) /* PCI Pin Assignment Register */
-+#define MCF_GPIO_MSCR_SDRAM \
-+ MCF_REG08(0xFC0A4074) /* SDRAM Mode Select Control Register */
-+#define MCF_GPIO_MSCR_PCI \
-+ MCF_REG08(0xFC0A4075) /* PCI Mode Select Control Register */
-+#define MCF_GPIO_DSCR_I2C \
-+ MCF_REG08(0xFC0A4078) /* I2C Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_FLEXBUS \
-+ MCF_REG08(0xFC0A4079) /* FLEXBUS Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_FEC \
-+ MCF_REG08(0xFC0A407A) /* FEC Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_UART \
-+ MCF_REG08(0xFC0A407B) /* UART Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_DSPI \
-+ MCF_REG08(0xFC0A407C) /* DSPI Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_TIMER \
-+ MCF_REG08(0xFC0A407D) /* TIMER Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_SSI \
-+ MCF_REG08(0xFC0A407E) /* SSI Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_DMA \
-+ MCF_REG08(0xFC0A407F) /* DMA Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_DEBUG \
-+ MCF_REG08(0xFC0A4080) /* DEBUG Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_RESET \
-+ MCF_REG08(0xFC0A4081) /* RESET Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_IRQ \
-+ MCF_REG08(0xFC0A4082) /* IRQ Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_USB \
-+ MCF_REG08(0xFC0A4083) /* USB Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_ATA \
-+ MCF_REG08(0xFC0A4084) /* ATA Drive Strength Control Register */
-+
-+/* Bit definitions and macros for PODR_FEC0H */
-+#define MCF_GPIO_PODR_FEC0H_PODR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */
-+#define MCF_GPIO_PODR_FEC0H_PODR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */
-+#define MCF_GPIO_PODR_FEC0H_PODR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */
-+#define MCF_GPIO_PODR_FEC0H_PODR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */
-+#define MCF_GPIO_PODR_FEC0H_PODR4 (0x10) /* FEC0_COL / ULPI_DATA7 */
-+#define MCF_GPIO_PODR_FEC0H_PODR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */
-+#define MCF_GPIO_PODR_FEC0H_PODR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */
-+#define MCF_GPIO_PODR_FEC0H_PODR7 (0x80) /* FEC0_TXCLK
-+ / FEC0_RMII_REF_CLK */
-+
-+/* Bit definitions and macros for PODR_FEC0L */
-+#define MCF_GPIO_PODR_FEC0L_PODR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */
-+#define MCF_GPIO_PODR_FEC0L_PODR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */
-+#define MCF_GPIO_PODR_FEC0L_PODR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */
-+#define MCF_GPIO_PODR_FEC0L_PODR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */
-+#define MCF_GPIO_PODR_FEC0L_PODR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */
-+#define MCF_GPIO_PODR_FEC0L_PODR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */
-+#define MCF_GPIO_PODR_FEC0L_PODR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */
-+#define MCF_GPIO_PODR_FEC0L_PODR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */
-+
-+/* Bit definitions and macros for PODR_SSI */
-+#define MCF_GPIO_PODR_SSI_PODR0 (0x01) /* SSI_TXD / U1TXD */
-+#define MCF_GPIO_PODR_SSI_PODR1 (0x02) /* SSI_RXD / U1RXD */
-+#define MCF_GPIO_PODR_SSI_PODR2 (0x04) /* SSI_FS / U1RTS */
-+#define MCF_GPIO_PODR_SSI_PODR3 (0x08) /* SSI_BCLK / U1CTS */
-+#define MCF_GPIO_PODR_SSI_PODR4 (0x10) /* SSI_MCLK */
-+
-+/* Bit definitions and macros for PODR_FBCTL */
-+#define MCF_GPIO_PODR_FBCTL_PODR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */
-+#define MCF_GPIO_PODR_FBCTL_PODR1 (0x02) /* FB_RW */
-+#define MCF_GPIO_PODR_FBCTL_PODR2 (0x04) /* FB_TA */
-+#define MCF_GPIO_PODR_FBCTL_PODR3 (0x08) /* FB_OE */
-+
-+/* Bit definitions and macros for PODR_BE */
-+#define MCF_GPIO_PODR_BE_PODR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */
-+#define MCF_GPIO_PODR_BE_PODR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */
-+#define MCF_GPIO_PODR_BE_PODR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */
-+#define MCF_GPIO_PODR_BE_PODR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */
-+
-+/* Bit definitions and macros for PODR_CS */
-+#define MCF_GPIO_PODR_CS_PODR1 (0x02) /* FB_CS1 */
-+#define MCF_GPIO_PODR_CS_PODR2 (0x04) /* FB_CS2 */
-+#define MCF_GPIO_PODR_CS_PODR3 (0x08) /* FB_CS3 */
-+
-+/* Bit definitions and macros for PODR_DMA */
-+#define MCF_GPIO_PODR_DMA_PODR0 (0x01) /* DREQ0 */
-+#define MCF_GPIO_PODR_DMA_PODR1 (0x02) /* DACK0 / DSPI_PCS3 */
-+#define MCF_GPIO_PODR_DMA_PODR2 (0x04) /* DREQ1 / USB_CLKIN */
-+#define MCF_GPIO_PODR_DMA_PODR3 (0x08) /* DACK1 / ULPI_DIR */
-+
-+/* Bit definitions and macros for PODR_FECI2C */
-+#define MCF_GPIO_PODR_FECI2C_PODR0 (0x01) /* I2C_SDA / U2RXD */
-+#define MCF_GPIO_PODR_FECI2C_PODR1 (0x02) /* I2C_SCL / U2TXD */
-+#define MCF_GPIO_PODR_FECI2C_PODR2 (0x04) /* FEC0_MDIO */
-+#define MCF_GPIO_PODR_FECI2C_PODR3 (0x08) /* FEC0_MDC */
-+#define MCF_GPIO_PODR_FECI2C_PODR4 (0x10) /* FEC1_MDIO / ATA_DIOW */
-+#define MCF_GPIO_PODR_FECI2C_PODR5 (0x20) /* FEC1_MDC / ATA_DIOR */
-+
-+/* Bit definitions and macros for PODR_UART */
-+#define MCF_GPIO_PODR_UART_PODR0 (0x01) /* U1TXD */
-+#define MCF_GPIO_PODR_UART_PODR1 (0x02) /* U1RXD */
-+#define MCF_GPIO_PODR_UART_PODR2 (0x04) /* U1RTS */
-+#define MCF_GPIO_PODR_UART_PODR3 (0x08) /* U0CTS */
-+#define MCF_GPIO_PODR_UART_PODR4 (0x10) /* U1TXD */
-+#define MCF_GPIO_PODR_UART_PODR5 (0x20) /* U1RXD */
-+#define MCF_GPIO_PODR_UART_PODR6 (0x40) /* U1RTS */
-+#define MCF_GPIO_PODR_UART_PODR7 (0x80) /* U1CTS */
-+
-+/* Bit definitions and macros for PODR_DSPI */
-+#define MCF_GPIO_PODR_DSPI_PODR0 (0x01) /* DSPI_SOUT / SBF_DO */
-+#define MCF_GPIO_PODR_DSPI_PODR1 (0x02) /* DSPI_SIN / SBF_DI */
-+#define MCF_GPIO_PODR_DSPI_PODR2 (0x04) /* DSPI_SCK / SBF_CK */
-+#define MCF_GPIO_PODR_DSPI_PODR3 (0x08) /* DSPI_PCS0/SS */
-+#define MCF_GPIO_PODR_DSPI_PODR4 (0x10) /* DSPI_PCS1 / SBF_CS */
-+#define MCF_GPIO_PODR_DSPI_PODR5 (0x20) /* DSPI_PCS2 */
-+#define MCF_GPIO_PODR_DSPI_PODR6 (0x40) /* DSPI_PCS5/SS */
-+
-+/* Bit definitions and macros for PODR_TIMER */
-+#define MCF_GPIO_PODR_TIMER_PODR0 (0x01) /* T0IN / T0OUT / U2RTS */
-+#define MCF_GPIO_PODR_TIMER_PODR1 (0x02) /* T1IN / T1OUT / U2CTS */
-+#define MCF_GPIO_PODR_TIMER_PODR2 (0x04) /* T2IN / T2OUT / U2TXD */
-+#define MCF_GPIO_PODR_TIMER_PODR3 (0x08) /* T3IN / T3OUT / U2RXD */
-+
-+/* Bit definitions and macros for PODR_PCI */
-+#define MCF_GPIO_PODR_PCI_PODR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */
-+#define MCF_GPIO_PODR_PCI_PODR1 (0x02) /* PCI_REQ1 */
-+#define MCF_GPIO_PODR_PCI_PODR2 (0x04) /* PCI_REQ2 */
-+#define MCF_GPIO_PODR_PCI_PODR3 (0x08) /* PCI_REQ3 / ATA_INTR */
-+#define MCF_GPIO_PODR_PCI_PODR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */
-+#define MCF_GPIO_PODR_PCI_PODR5 (0x20) /* PCI_GNT1 / */
-+#define MCF_GPIO_PODR_PCI_PODR6 (0x40) /* PCI_GNT2 / */
-+#define MCF_GPIO_PODR_PCI_PODR7 (0x80) /* PCI_GNT3 / ATA_DMACK */
-+
-+/* Bit definitions and macros for PODR_USB */
-+#define MCF_GPIO_PODR_USB_PODR0 (0x01) /* USB_VBUS_OC / ULPI_STP */
-+#define MCF_GPIO_PODR_USB_PODR1 (0x02) /* USB_VBUS_EN / USB_PULLUP
-+ / ULPI_NXT */
-+
-+/* Bit definitions and macros for PODR_ATAH */
-+#define MCF_GPIO_PODR_ATAH_PODR0 (0x01) /* ATA_DA0 */
-+#define MCF_GPIO_PODR_ATAH_PODR1 (0x02) /* ATA_DA1 */
-+#define MCF_GPIO_PODR_ATAH_PODR2 (0x04) /* ATA_DA2 */
-+#define MCF_GPIO_PODR_ATAH_PODR3 (0x08) /* ATA_CS0 */
-+#define MCF_GPIO_PODR_ATAH_PODR4 (0x10) /* ATA_CS1 */
-+#define MCF_GPIO_PODR_ATAH_PODR5 (0x20) /* ATA_BUFFER_EN */
-+
-+/* Bit definitions and macros for PODR_ATAL */
-+#define MCF_GPIO_PODR_ATAL_PODR0 (0x01) /* ATA_IORDY */
-+#define MCF_GPIO_PODR_ATAL_PODR1 (0x02) /* ATA_DMARQ */
-+#define MCF_GPIO_PODR_ATAL_PODR2 (0x04) /* ATA_RESET */
-+
-+/* Bit definitions and macros for PODR_FEC1H */
-+#define MCF_GPIO_PODR_FEC1H_PODR0 (0x01) /* FEC1_CRS / ATA_DATA6 */
-+/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
-+#define MCF_GPIO_PODR_FEC1H_PODR1 (0x02)
-+/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
-+#define MCF_GPIO_PODR_FEC1H_PODR2 (0x04)
-+#define MCF_GPIO_PODR_FEC1H_PODR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */
-+#define MCF_GPIO_PODR_FEC1H_PODR4 (0x10) /* FEC1_COL / ATA_DATA7 */
-+/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
-+#define MCF_GPIO_PODR_FEC1H_PODR5 (0x20)
-+/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
-+#define MCF_GPIO_PODR_FEC1H_PODR6 (0x40)
-+/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
-+#define MCF_GPIO_PODR_FEC1H_PODR7 (0x80)
-+
-+/* Bit definitions and macros for PODR_FEC1L */
-+#define MCF_GPIO_PODR_FEC1L_PODR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER
-+ / ATA_DATA12 */
-+#define MCF_GPIO_PODR_FEC1L_PODR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1
-+ / ATA_DATA14 */
-+#define MCF_GPIO_PODR_FEC1L_PODR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */
-+#define MCF_GPIO_PODR_FEC1L_PODR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */
-+#define MCF_GPIO_PODR_FEC1L_PODR4 (0x10) /* FEC1_TXER / ATA_DATA0 */
-+#define MCF_GPIO_PODR_FEC1L_PODR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1
-+ / ATA_DATA10 */
-+#define MCF_GPIO_PODR_FEC1L_PODR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */
-+#define MCF_GPIO_PODR_FEC1L_PODR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */
-+
-+/* Bit definitions and macros for PODR_FBADH */
-+#define MCF_GPIO_PODR_FBADH_PODR0 (0x01) /* FB_AD24 */
-+#define MCF_GPIO_PODR_FBADH_PODR1 (0x02) /* FB_AD25 */
-+#define MCF_GPIO_PODR_FBADH_PODR2 (0x04) /* FB_AD26 */
-+#define MCF_GPIO_PODR_FBADH_PODR3 (0x08) /* FB_AD27 */
-+#define MCF_GPIO_PODR_FBADH_PODR4 (0x10) /* FB_AD28 */
-+#define MCF_GPIO_PODR_FBADH_PODR5 (0x20) /* FB_AD29 */
-+#define MCF_GPIO_PODR_FBADH_PODR6 (0x40) /* FB_AD30 */
-+#define MCF_GPIO_PODR_FBADH_PODR7 (0x80) /* FB_AD31 */
-+
-+/* Bit definitions and macros for PODR_FBADMH */
-+#define MCF_GPIO_PODR_FBADMH_PODR0 (0x01) /* FB_AD16 */
-+#define MCF_GPIO_PODR_FBADMH_PODR1 (0x02) /* FB_AD17 */
-+#define MCF_GPIO_PODR_FBADMH_PODR2 (0x04) /* FB_AD18 */
-+#define MCF_GPIO_PODR_FBADMH_PODR3 (0x08) /* FB_AD19 */
-+#define MCF_GPIO_PODR_FBADMH_PODR4 (0x10) /* FB_AD20 */
-+#define MCF_GPIO_PODR_FBADMH_PODR5 (0x20) /* FB_AD21 */
-+#define MCF_GPIO_PODR_FBADMH_PODR6 (0x40) /* FB_AD22 */
-+#define MCF_GPIO_PODR_FBADMH_PODR7 (0x80) /* FB_AD23 */
-+
-+/* Bit definitions and macros for PODR_FBADML */
-+#define MCF_GPIO_PODR_FBADML_PODR0 (0x01) /* FB_AD8 */
-+#define MCF_GPIO_PODR_FBADML_PODR1 (0x02) /* FB_AD9 */
-+#define MCF_GPIO_PODR_FBADML_PODR2 (0x04) /* FB_AD10 */
-+#define MCF_GPIO_PODR_FBADML_PODR3 (0x08) /* FB_AD11 */
-+#define MCF_GPIO_PODR_FBADML_PODR4 (0x10) /* FB_AD12 */
-+#define MCF_GPIO_PODR_FBADML_PODR5 (0x20) /* FB_AD13 */
-+#define MCF_GPIO_PODR_FBADML_PODR6 (0x40) /* FB_AD14 */
-+#define MCF_GPIO_PODR_FBADML_PODR7 (0x80) /* FB_AD15 */
-+
-+/* Bit definitions and macros for PODR_FBADL */
-+#define MCF_GPIO_PODR_FBADL_PODR0 (0x01) /* FB_AD0 */
-+#define MCF_GPIO_PODR_FBADL_PODR1 (0x02) /* FB_AD1 */
-+#define MCF_GPIO_PODR_FBADL_PODR2 (0x04) /* FB_AD2 */
-+#define MCF_GPIO_PODR_FBADL_PODR3 (0x08) /* FB_AD3 */
-+#define MCF_GPIO_PODR_FBADL_PODR4 (0x10) /* FB_AD4 */
-+#define MCF_GPIO_PODR_FBADL_PODR5 (0x20) /* FB_AD5 */
-+#define MCF_GPIO_PODR_FBADL_PODR6 (0x40) /* FB_AD6 */
-+#define MCF_GPIO_PODR_FBADL_PODR7 (0x80) /* FB_AD7 */
-+
-+/* Bit definitions and macros for PDDR_FEC0H */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR4 (0x10) /* FEC0_COL / ULPI_DATA7 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR7 (0x80) /* FEC0_TXCLK
-+ / FEC0_RMII_REF_CLK */
-+
-+/* Bit definitions and macros for PDDR_FEC0L */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */
-+
-+/* Bit definitions and macros for PDDR_SSI */
-+#define MCF_GPIO_PDDR_SSI_PDDR0 (0x01) /* SSI_TXD / U1TXD */
-+#define MCF_GPIO_PDDR_SSI_PDDR1 (0x02) /* SSI_RXD / U1RXD */
-+#define MCF_GPIO_PDDR_SSI_PDDR2 (0x04) /* SSI_FS / U1RTS */
-+#define MCF_GPIO_PDDR_SSI_PDDR3 (0x08) /* SSI_BCLK / U1CTS */
-+#define MCF_GPIO_PDDR_SSI_PDDR4 (0x10) /* SSI_MCLK */
-+
-+/* Bit definitions and macros for PDDR_FBCTL */
-+#define MCF_GPIO_PDDR_FBCTL_PDDR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */
-+#define MCF_GPIO_PDDR_FBCTL_PDDR1 (0x02) /* FB_RW */
-+#define MCF_GPIO_PDDR_FBCTL_PDDR2 (0x04) /* FB_TA */
-+#define MCF_GPIO_PDDR_FBCTL_PDDR3 (0x08) /* FB_OE */
-+
-+/* Bit definitions and macros for PDDR_BE */
-+#define MCF_GPIO_PDDR_BE_PDDR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */
-+#define MCF_GPIO_PDDR_BE_PDDR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */
-+#define MCF_GPIO_PDDR_BE_PDDR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */
-+#define MCF_GPIO_PDDR_BE_PDDR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */
-+
-+/* Bit definitions and macros for PDDR_CS */
-+#define MCF_GPIO_PDDR_CS_PDDR1 (0x02) /* FB_CS1 */
-+#define MCF_GPIO_PDDR_CS_PDDR2 (0x04) /* FB_CS2 */
-+#define MCF_GPIO_PDDR_CS_PDDR3 (0x08) /* FB_CS3 */
-+
-+/* Bit definitions and macros for PDDR_DMA */
-+#define MCF_GPIO_PDDR_DMA_PDDR0 (0x01) /* DREQ0 */
-+#define MCF_GPIO_PDDR_DMA_PDDR1 (0x02) /* DACK0 / DSPI_PCS3 */
-+#define MCF_GPIO_PDDR_DMA_PDDR2 (0x04) /* DREQ1 / USB_CLKIN */
-+#define MCF_GPIO_PDDR_DMA_PDDR3 (0x08) /* DACK1 / ULPI_DIR */
-+
-+/* Bit definitions and macros for PDDR_FECI2C */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR0 (0x01) /* I2C_SDA / U2RXD */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR1 (0x02) /* I2C_SCL / U2TXD */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR2 (0x04) /* FEC0_MDIO */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR3 (0x08) /* FEC0_MDC */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR4 (0x10) /* FEC1_MDIO / ATA_DIOW */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR5 (0x20) /* FEC1_MDC / ATA_DIOR */
-+
-+/* Bit definitions and macros for PDDR_UART */
-+#define MCF_GPIO_PDDR_UART_PDDR0 (0x01) /* U1TXD */
-+#define MCF_GPIO_PDDR_UART_PDDR1 (0x02) /* U1RXD */
-+#define MCF_GPIO_PDDR_UART_PDDR2 (0x04) /* U1RTS */
-+#define MCF_GPIO_PDDR_UART_PDDR3 (0x08) /* U0CTS */
-+#define MCF_GPIO_PDDR_UART_PDDR4 (0x10) /* U1TXD */
-+#define MCF_GPIO_PDDR_UART_PDDR5 (0x20) /* U1RXD */
-+#define MCF_GPIO_PDDR_UART_PDDR6 (0x40) /* U1RTS */
-+#define MCF_GPIO_PDDR_UART_PDDR7 (0x80) /* U1CTS */
-+
-+/* Bit definitions and macros for PDDR_DSPI */
-+#define MCF_GPIO_PDDR_DSPI_PDDR0 (0x01) /* DSPI_SOUT / SBF_DO */
-+#define MCF_GPIO_PDDR_DSPI_PDDR1 (0x02) /* DSPI_SIN / SBF_DI */
-+#define MCF_GPIO_PDDR_DSPI_PDDR2 (0x04) /* DSPI_SCK / SBF_CK */
-+#define MCF_GPIO_PDDR_DSPI_PDDR3 (0x08) /* DSPI_PCS0/SS */
-+#define MCF_GPIO_PDDR_DSPI_PDDR4 (0x10) /* DSPI_PCS1 / SBF_CS */
-+#define MCF_GPIO_PDDR_DSPI_PDDR5 (0x20) /* DSPI_PCS2 */
-+#define MCF_GPIO_PDDR_DSPI_PDDR6 (0x40) /* DSPI_PCS5/SS */
-+
-+/* Bit definitions and macros for PDDR_TIMER */
-+#define MCF_GPIO_PDDR_TIMER_PDDR0 (0x01) /* T0IN / T0OUT / U2RTS */
-+#define MCF_GPIO_PDDR_TIMER_PDDR1 (0x02) /* T1IN / T1OUT / U2CTS */
-+#define MCF_GPIO_PDDR_TIMER_PDDR2 (0x04) /* T2IN / T2OUT / U2TXD */
-+#define MCF_GPIO_PDDR_TIMER_PDDR3 (0x08) /* T3IN / T3OUT / U2RXD */
-+
-+/* Bit definitions and macros for PDDR_PCI */
-+#define MCF_GPIO_PDDR_PCI_PDDR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */
-+#define MCF_GPIO_PDDR_PCI_PDDR1 (0x02) /* PCI_REQ1 */
-+#define MCF_GPIO_PDDR_PCI_PDDR2 (0x04) /* PCI_REQ2 */
-+#define MCF_GPIO_PDDR_PCI_PDDR3 (0x08) /* PCI_REQ3 / ATA_INTR */
-+#define MCF_GPIO_PDDR_PCI_PDDR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */
-+#define MCF_GPIO_PDDR_PCI_PDDR5 (0x20) /* PCI_GNT1 / */
-+#define MCF_GPIO_PDDR_PCI_PDDR6 (0x40) /* PCI_GNT2 / */
-+#define MCF_GPIO_PDDR_PCI_PDDR7 (0x80) /* PCI_GNT3 / ATA_DMACK */
-+
-+/* Bit definitions and macros for PDDR_USB */
-+#define MCF_GPIO_PDDR_USB_PDDR0 (0x01) /* USB_VBUS_OC / ULPI_STP */
-+#define MCF_GPIO_PDDR_USB_PDDR1 (0x02) /* USB_VBUS_EN / USB_PULLUP
-+ / ULPI_NXT */
-+
-+/* Bit definitions and macros for PDDR_ATAH */
-+#define MCF_GPIO_PDDR_ATAH_PDDR0 (0x01) /* ATA_DA0 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR1 (0x02) /* ATA_DA1 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR2 (0x04) /* ATA_DA2 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR3 (0x08) /* ATA_CS0 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR4 (0x10) /* ATA_CS1 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR5 (0x20) /* ATA_BUFFER_EN */
-+
-+/* Bit definitions and macros for PDDR_ATAL */
-+#define MCF_GPIO_PDDR_ATAL_PDDR0 (0x01) /* ATA_IORDY */
-+#define MCF_GPIO_PDDR_ATAL_PDDR1 (0x02) /* ATA_DMARQ */
-+#define MCF_GPIO_PDDR_ATAL_PDDR2 (0x04) /* ATA_RESET */
-+
-+/* Bit definitions and macros for PDDR_FEC1H */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR0 (0x01) /* FEC1_CRS / ATA_DATA6 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0
-+ / ATA_DATA13 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV
-+ / ATA_DATA15 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR4 (0x10) /* FEC1_COL / ATA_DATA7 */
-+/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR5 (0x20)
-+/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR6 (0x40)
-+/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR7 (0x80)
-+
-+/* Bit definitions and macros for PDDR_FEC1L */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER
-+ / ATA_DATA12 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1
-+ / ATA_DATA14 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR4 (0x10) /* FEC1_TXER / ATA_DATA0 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1
-+ / ATA_DATA10 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */
-+
-+/* Bit definitions and macros for PDDR_FBADH */
-+#define MCF_GPIO_PDDR_FBADH_PDDR0 (0x01) /* FB_AD24 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR1 (0x02) /* FB_AD25 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR2 (0x04) /* FB_AD26 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR3 (0x08) /* FB_AD27 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR4 (0x10) /* FB_AD28 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR5 (0x20) /* FB_AD29 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR6 (0x40) /* FB_AD30 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR7 (0x80) /* FB_AD31 */
-+
-+/* Bit definitions and macros for PDDR_FBADMH */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR0 (0x01) /* FB_AD16 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR1 (0x02) /* FB_AD17 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR2 (0x04) /* FB_AD18 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR3 (0x08) /* FB_AD19 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR4 (0x10) /* FB_AD20 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR5 (0x20) /* FB_AD21 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR6 (0x40) /* FB_AD22 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR7 (0x80) /* FB_AD23 */
-+
-+/* Bit definitions and macros for PDDR_FBADML */
-+#define MCF_GPIO_PDDR_FBADML_PDDR0 (0x01) /* FB_AD8 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR1 (0x02) /* FB_AD9 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR2 (0x04) /* FB_AD10 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR3 (0x08) /* FB_AD11 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR4 (0x10) /* FB_AD12 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR5 (0x20) /* FB_AD13 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR6 (0x40) /* FB_AD14 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR7 (0x80) /* FB_AD15 */
-+
-+/* Bit definitions and macros for PDDR_FBADL */
-+#define MCF_GPIO_PDDR_FBADL_PDDR0 (0x01) /* FB_AD0 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR1 (0x02) /* FB_AD1 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR2 (0x04) /* FB_AD2 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR3 (0x08) /* FB_AD3 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR4 (0x10) /* FB_AD4 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR5 (0x20) /* FB_AD5 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR6 (0x40) /* FB_AD6 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR7 (0x80) /* FB_AD7 */
-+
-+/* Bit definitions and macros for PPDSDR_FEC0H */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR2 (0x04) /* FEC0_RXDV
-+ / FEC0_RMII_CRS_DV */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR4 (0x10) /* FEC0_COL / ULPI_DATA7 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR7 (0x80) /* FEC0_TXCLK
-+ / FEC0_RMII_REF_CLK */
-+
-+/* Bit definitions and macros for PPDSDR_FEC0L */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */
-+
-+/* Bit definitions and macros for PPDSDR_SSI */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR0 (0x01) /* SSI_TXD / U1TXD */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR1 (0x02) /* SSI_RXD / U1RXD */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR2 (0x04) /* SSI_FS / U1RTS */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR3 (0x08) /* SSI_BCLK / U1CTS */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR4 (0x10) /* SSI_MCLK */
-+
-+/* Bit definitions and macros for PPDSDR_FBCTL */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDR1 (0x02) /* FB_RW */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDR2 (0x04) /* FB_TA */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDR3 (0x08) /* FB_OE */
-+
-+/* Bit definitions and macros for PPDSDR_BE */
-+#define MCF_GPIO_PPDSDR_BE_PPDR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */
-+#define MCF_GPIO_PPDSDR_BE_PPDR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */
-+#define MCF_GPIO_PPDSDR_BE_PPDR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */
-+#define MCF_GPIO_PPDSDR_BE_PPDR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */
-+
-+/* Bit definitions and macros for PPDSDR_CS */
-+#define MCF_GPIO_PPDSDR_CS_PPDR1 (0x02) /* FB_CS1 */
-+#define MCF_GPIO_PPDSDR_CS_PPDR2 (0x04) /* FB_CS2 */
-+#define MCF_GPIO_PPDSDR_CS_PPDR3 (0x08) /* FB_CS3 */
-+
-+/* Bit definitions and macros for PPDSDR_DMA */
-+#define MCF_GPIO_PPDSDR_DMA_PPDR0 (0x01) /* DREQ0 */
-+#define MCF_GPIO_PPDSDR_DMA_PPDR1 (0x02) /* DACK0 / DSPI_PCS3 */
-+#define MCF_GPIO_PPDSDR_DMA_PPDR2 (0x04) /* DREQ1 / USB_CLKIN */
-+#define MCF_GPIO_PPDSDR_DMA_PPDR3 (0x08) /* DACK1 / ULPI_DIR */
-+
-+/* Bit definitions and macros for PPDSDR_FECI2C */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR0 (0x01) /* I2C_SDA / U2RXD */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR1 (0x02) /* I2C_SCL / U2TXD */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR2 (0x04) /* FEC0_MDIO */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR3 (0x08) /* FEC0_MDC */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR4 (0x10) /* FEC1_MDIO / ATA_DIOW */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR5 (0x20) /* FEC1_MDC / ATA_DIOR */
-+
-+/* Bit definitions and macros for PPDSDR_UART */
-+#define MCF_GPIO_PPDSDR_UART_PPDR0 (0x01) /* U1TXD */
-+#define MCF_GPIO_PPDSDR_UART_PPDR1 (0x02) /* U1RXD */
-+#define MCF_GPIO_PPDSDR_UART_PPDR2 (0x04) /* U1RTS */
-+#define MCF_GPIO_PPDSDR_UART_PPDR3 (0x08) /* U0CTS */
-+#define MCF_GPIO_PPDSDR_UART_PPDR4 (0x10) /* U1TXD */
-+#define MCF_GPIO_PPDSDR_UART_PPDR5 (0x20) /* U1RXD */
-+#define MCF_GPIO_PPDSDR_UART_PPDR6 (0x40) /* U1RTS */
-+#define MCF_GPIO_PPDSDR_UART_PPDR7 (0x80) /* U1CTS */
-+
-+/* Bit definitions and macros for PPDSDR_DSPI */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR0 (0x01) /* DSPI_SOUT / SBF_DO */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR1 (0x02) /* DSPI_SIN / SBF_DI */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR2 (0x04) /* DSPI_SCK / SBF_CK */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR3 (0x08) /* DSPI_PCS0/SS */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR4 (0x10) /* DSPI_PCS1 / SBF_CS */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR5 (0x20) /* DSPI_PCS2 */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR6 (0x40) /* DSPI_PCS5/SS */
-+
-+/* Bit definitions and macros for PPDSDR_TIMER */
-+#define MCF_GPIO_PPDSDR_TIMER_PPDR0 (0x01) /* T0IN / T0OUT / U2RTS */
-+#define MCF_GPIO_PPDSDR_TIMER_PPDR1 (0x02) /* T1IN / T1OUT / U2CTS */
-+#define MCF_GPIO_PPDSDR_TIMER_PPDR2 (0x04) /* T2IN / T2OUT / U2TXD */
-+#define MCF_GPIO_PPDSDR_TIMER_PPDR3 (0x08) /* T3IN / T3OUT / U2RXD */
-+
-+/* Bit definitions and macros for PPDSDR_PCI */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR1 (0x02) /* PCI_REQ1 */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR2 (0x04) /* PCI_REQ2 */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR3 (0x08) /* PCI_REQ3 / ATA_INTR */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR5 (0x20) /* PCI_GNT1 / */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR6 (0x40) /* PCI_GNT2 / */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR7 (0x80) /* PCI_GNT3 / ATA_DMACK */
-+
-+/* Bit definitions and macros for PPDSDR_USB */
-+#define MCF_GPIO_PPDSDR_USB_PPDR0 (0x01) /* USB_VBUS_OC / ULPI_STP */
-+#define MCF_GPIO_PPDSDR_USB_PPDR1 (0x02) /* USB_VBUS_EN / USB_PULLUP
-+ / ULPI_NXT */
-+
-+/* Bit definitions and macros for PPDSDR_ATAH */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR0 (0x01) /* ATA_DA0 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR1 (0x02) /* ATA_DA1 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR2 (0x04) /* ATA_DA2 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR3 (0x08) /* ATA_CS0 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR4 (0x10) /* ATA_CS1 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR5 (0x20) /* ATA_BUFFER_EN */
-+
-+/* Bit definitions and macros for PPDSDR_ATAL */
-+#define MCF_GPIO_PPDSDR_ATAL_PPDR0 (0x01) /* ATA_IORDY */
-+#define MCF_GPIO_PPDSDR_ATAL_PPDR1 (0x02) /* ATA_DMARQ */
-+#define MCF_GPIO_PPDSDR_ATAL_PPDR2 (0x04) /* ATA_RESET */
-+
-+/* Bit definitions and macros for PPDSDR_FEC1H */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR0 (0x01) /* FEC1_CRS / ATA_DATA6 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0
-+ / ATA_DATA13 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV
-+ / ATA_DATA15 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR4 (0x10) /* FEC1_COL / ATA_DATA7 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0
-+ / ATA_DATA9 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN
-+ / ATA_DATA8 */
-+/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR7 (0x80)
-+
-+/* Bit definitions and macros for PPDSDR_FEC1L */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER
-+ / ATA_DATA12 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1
-+ / ATA_DATA14 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR4 (0x10) /* FEC1_TXER / ATA_DATA0 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1
-+ / ATA_DATA10 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */
-+
-+/* Bit definitions and macros for PPDSDR_FBADH */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR0 (0x01) /* FB_AD24 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR1 (0x02) /* FB_AD25 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR2 (0x04) /* FB_AD26 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR3 (0x08) /* FB_AD27 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR4 (0x10) /* FB_AD28 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR5 (0x20) /* FB_AD29 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR6 (0x40) /* FB_AD30 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR7 (0x80) /* FB_AD31 */
-+
-+/* Bit definitions and macros for PPDSDR_FBADMH */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR0 (0x01) /* FB_AD16 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR1 (0x02) /* FB_AD17 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR2 (0x04) /* FB_AD18 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR3 (0x08) /* FB_AD19 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR4 (0x10) /* FB_AD20 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR5 (0x20) /* FB_AD21 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR6 (0x40) /* FB_AD22 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR7 (0x80) /* FB_AD23 */
-+
-+/* Bit definitions and macros for PPDSDR_FBADML */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR0 (0x01) /* FB_AD8 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR1 (0x02) /* FB_AD9 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR2 (0x04) /* FB_AD10 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR3 (0x08) /* FB_AD11 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR4 (0x10) /* FB_AD12 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR5 (0x20) /* FB_AD13 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR6 (0x40) /* FB_AD14 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR7 (0x80) /* FB_AD15 */
-+
-+/* Bit definitions and macros for PPDSDR_FBADL */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR0 (0x01) /* FB_AD0 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR1 (0x02) /* FB_AD1 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR2 (0x04) /* FB_AD2 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR3 (0x08) /* FB_AD3 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR4 (0x10) /* FB_AD4 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR5 (0x20) /* FB_AD5 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR6 (0x40) /* FB_AD6 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR7 (0x80) /* FB_AD7 */
-+
-+/* Bit definitions and macros for PCLRR_FEC0H */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR4 (0x10) /* FEC0_COL / ULPI_DATA7 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR7 (0x80) /* FEC0_TXCLK
-+ / FEC0_RMII_REF_CLK */
-+
-+/* Bit definitions and macros for PCLRR_FEC0L */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */
-+
-+/* Bit definitions and macros for PCLRR_SSI */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR0 (0x01) /* SSI_TXD / U1TXD */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR1 (0x02) /* SSI_RXD / U1RXD */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR2 (0x04) /* SSI_FS / U1RTS */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR3 (0x08) /* SSI_BCLK / U1CTS */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR4 (0x10) /* SSI_MCLK */
-+
-+/* Bit definitions and macros for PCLRR_FBCTL */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRR1 (0x02) /* FB_RW */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRR2 (0x04) /* FB_TA */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRR3 (0x08) /* FB_OE */
-+
-+/* Bit definitions and macros for PCLRR_BE */
-+#define MCF_GPIO_PCLRR_BE_PCLRR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */
-+#define MCF_GPIO_PCLRR_BE_PCLRR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */
-+#define MCF_GPIO_PCLRR_BE_PCLRR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */
-+#define MCF_GPIO_PCLRR_BE_PCLRR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */
-+
-+/* Bit definitions and macros for PCLRR_CS */
-+#define MCF_GPIO_PCLRR_CS_PCLRR1 (0x02) /* FB_CS1 */
-+#define MCF_GPIO_PCLRR_CS_PCLRR2 (0x04) /* FB_CS2 */
-+#define MCF_GPIO_PCLRR_CS_PCLRR3 (0x08) /* FB_CS3 */
-+
-+/* Bit definitions and macros for PCLRR_DMA */
-+#define MCF_GPIO_PCLRR_DMA_PCLRR0 (0x01) /* DREQ0 */
-+#define MCF_GPIO_PCLRR_DMA_PCLRR1 (0x02) /* DACK0 / DSPI_PCS3 */
-+#define MCF_GPIO_PCLRR_DMA_PCLRR2 (0x04) /* DREQ1 / USB_CLKIN */
-+#define MCF_GPIO_PCLRR_DMA_PCLRR3 (0x08) /* DACK1 / ULPI_DIR */
-+
-+/* Bit definitions and macros for PCLRR_FECI2C */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR0 (0x01) /* I2C_SDA / U2RXD */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR1 (0x02) /* I2C_SCL / U2TXD */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR2 (0x04) /* FEC0_MDIO */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR3 (0x08) /* FEC0_MDC */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR4 (0x10) /* FEC1_MDIO / ATA_DIOW */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR5 (0x20) /* FEC1_MDC / ATA_DIOR */
-+
-+/* Bit definitions and macros for PCLRR_UART */
-+#define MCF_GPIO_PCLRR_UART_PCLRR0 (0x01) /* U1TXD */
-+#define MCF_GPIO_PCLRR_UART_PCLRR1 (0x02) /* U1RXD */
-+#define MCF_GPIO_PCLRR_UART_PCLRR2 (0x04) /* U1RTS */
-+#define MCF_GPIO_PCLRR_UART_PCLRR3 (0x08) /* U0CTS */
-+#define MCF_GPIO_PCLRR_UART_PCLRR4 (0x10) /* U1TXD */
-+#define MCF_GPIO_PCLRR_UART_PCLRR5 (0x20) /* U1RXD */
-+#define MCF_GPIO_PCLRR_UART_PCLRR6 (0x40) /* U1RTS */
-+#define MCF_GPIO_PCLRR_UART_PCLRR7 (0x80) /* U1CTS */
-+
-+/* Bit definitions and macros for PCLRR_DSPI */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR0 (0x01) /* DSPI_SOUT / SBF_DO */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR1 (0x02) /* DSPI_SIN / SBF_DI */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR2 (0x04) /* DSPI_SCK / SBF_CK */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR3 (0x08) /* DSPI_PCS0/SS */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR4 (0x10) /* DSPI_PCS1 / SBF_CS */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR5 (0x20) /* DSPI_PCS2 */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR6 (0x40) /* DSPI_PCS5/SS */
-+
-+/* Bit definitions and macros for PCLRR_TIMER */
-+#define MCF_GPIO_PCLRR_TIMER_PCLRR0 (0x01) /* T0IN / T0OUT / U2RTS */
-+#define MCF_GPIO_PCLRR_TIMER_PCLRR1 (0x02) /* T1IN / T1OUT / U2CTS */
-+#define MCF_GPIO_PCLRR_TIMER_PCLRR2 (0x04) /* T2IN / T2OUT / U2TXD */
-+#define MCF_GPIO_PCLRR_TIMER_PCLRR3 (0x08) /* T3IN / T3OUT / U2RXD */
-+
-+/* Bit definitions and macros for PCLRR_PCI */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR1 (0x02) /* PCI_REQ1 */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR2 (0x04) /* PCI_REQ2 */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR3 (0x08) /* PCI_REQ3 / ATA_INTR */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR5 (0x20) /* PCI_GNT1 / */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR6 (0x40) /* PCI_GNT2 / */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR7 (0x80) /* PCI_GNT3 / ATA_DMACK */
-+
-+/* Bit definitions and macros for PCLRR_USB */
-+#define MCF_GPIO_PCLRR_USB_PCLRR0 (0x01) /* USB_VBUS_OC / ULPI_STP */
-+#define MCF_GPIO_PCLRR_USB_PCLRR1 (0x02) /* USB_VBUS_EN / USB_PULLUP
-+ / ULPI_NXT */
-+
-+/* Bit definitions and macros for PCLRR_ATAH */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR0 (0x01) /* ATA_DA0 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR1 (0x02) /* ATA_DA1 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR2 (0x04) /* ATA_DA2 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR3 (0x08) /* ATA_CS0 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR4 (0x10) /* ATA_CS1 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR5 (0x20) /* ATA_BUFFER_EN */
-+
-+/* Bit definitions and macros for PCLRR_ATAL */
-+#define MCF_GPIO_PCLRR_ATAL_PCLRR0 (0x01) /* ATA_IORDY */
-+#define MCF_GPIO_PCLRR_ATAL_PCLRR1 (0x02) /* ATA_DMARQ */
-+#define MCF_GPIO_PCLRR_ATAL_PCLRR2 (0x04) /* ATA_RESET */
-+
-+/* Bit definitions and macros for PCLRR_FEC1H */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR0 (0x01) /* FEC1_CRS / ATA_DATA6 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0
-+ /ATA_DATA13 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV
-+ / ATA_DATA15 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR4 (0x10) /* FEC1_COL / ATA_DATA7 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0
-+ / ATA_DATA9 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN
-+ / ATA_DATA8 */
-+/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR7 (0x80)
-+
-+/* Bit definitions and macros for PCLRR_FEC1L */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER
-+ / ATA_DATA12 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1
-+ / ATA_DATA14 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR4 (0x10) /* FEC1_TXER / ATA_DATA0 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1
-+ / ATA_DATA10 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */
-+
-+/* Bit definitions and macros for PCLRR_FBADH */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR0 (0x01) /* FB_AD24 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR1 (0x02) /* FB_AD25 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR2 (0x04) /* FB_AD26 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR3 (0x08) /* FB_AD27 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR4 (0x10) /* FB_AD28 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR5 (0x20) /* FB_AD29 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR6 (0x40) /* FB_AD30 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR7 (0x80) /* FB_AD31 */
-+
-+/* Bit definitions and macros for PCLRR_FBADMH */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR0 (0x01) /* FB_AD16 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR1 (0x02) /* FB_AD17 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR2 (0x04) /* FB_AD18 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR3 (0x08) /* FB_AD19 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR4 (0x10) /* FB_AD20 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR5 (0x20) /* FB_AD21 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR6 (0x40) /* FB_AD22 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR7 (0x80) /* FB_AD23 */
-+
-+/* Bit definitions and macros for PCLRR_FBADML */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR0 (0x01) /* FB_AD8 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR1 (0x02) /* FB_AD9 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR2 (0x04) /* FB_AD10 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR3 (0x08) /* FB_AD11 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR4 (0x10) /* FB_AD12 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR5 (0x20) /* FB_AD13 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR6 (0x40) /* FB_AD14 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR7 (0x80) /* FB_AD15 */
-+
-+/* Bit definitions and macros for PCLRR_FBADL */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR0 (0x01) /* FB_AD0 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR1 (0x02) /* FB_AD1 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR2 (0x04) /* FB_AD2 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR3 (0x08) /* FB_AD3 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR4 (0x10) /* FB_AD4 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR5 (0x20) /* FB_AD5 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR6 (0x40) /* FB_AD6 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR7 (0x80) /* FB_AD7 */
-+
-+/* Bit definitions and macros for PAR_FEC */
-+#define MCF_GPIO_PAR_FEC_FEC0(x) (((x)&0x07))
-+#define MCF_GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4)
-+#define MCF_GPIO_PAR_FEC_FEC1_MASK (0x8F)
-+#define MCF_GPIO_PAR_FEC_FEC1_MII (0x70)
-+#define MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30)
-+#define MCF_GPIO_PAR_FEC_FEC1_RMII_ATA (0x20)
-+#define MCF_GPIO_PAR_FEC_FEC1_ATA (0x10)
-+#define MCF_GPIO_PAR_FEC_FEC1_GPIO (0x00)
-+#define MCF_GPIO_PAR_FEC_FEC0_MASK (0xF8)
-+#define MCF_GPIO_PAR_FEC_FEC0_MII (0x07)
-+#define MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03)
-+#define MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02)
-+#define MCF_GPIO_PAR_FEC_FEC0_ULPI (0x01)
-+#define MCF_GPIO_PAR_FEC_FEC0_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_DMA */
-+#define MCF_GPIO_PAR_DMA_DREQ0 (0x01)
-+#define MCF_GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_DMA_DACK1_MASK (0x3F)
-+#define MCF_GPIO_PAR_DMA_DACK1_DACK1 (0xC0)
-+#define MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40)
-+#define MCF_GPIO_PAR_DMA_DACK1_GPIO (0x00)
-+#define MCF_GPIO_PAR_DMA_DREQ1_MASK (0xCF)
-+#define MCF_GPIO_PAR_DMA_DREQ1_DREQ1 (0x30)
-+#define MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10)
-+#define MCF_GPIO_PAR_DMA_DREQ1_GPIO (0x00)
-+#define MCF_GPIO_PAR_DMA_DACK0_MASK (0xF3)
-+#define MCF_GPIO_PAR_DMA_DACK0_DACK1 (0x0C)
-+#define MCF_GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04)
-+#define MCF_GPIO_PAR_DMA_DACK0_GPIO (0x00)
-+#define MCF_GPIO_PAR_DMA_DREQ0_DREQ0 (0x01)
-+#define MCF_GPIO_PAR_DMA_DREQ0_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_FBCTL */
-+#define MCF_GPIO_PAR_FBCTL_TS(x) (((x)&0x03)<<3)
-+#define MCF_GPIO_PAR_FBCTL_RW (0x20)
-+#define MCF_GPIO_PAR_FBCTL_TA (0x40)
-+#define MCF_GPIO_PAR_FBCTL_OE (0x80)
-+#define MCF_GPIO_PAR_FBCTL_OE_OE (0x80)
-+#define MCF_GPIO_PAR_FBCTL_OE_GPIO (0x00)
-+#define MCF_GPIO_PAR_FBCTL_TA_TA (0x40)
-+#define MCF_GPIO_PAR_FBCTL_TA_GPIO (0x00)
-+#define MCF_GPIO_PAR_FBCTL_RW_RW (0x20)
-+#define MCF_GPIO_PAR_FBCTL_RW_GPIO (0x00)
-+#define MCF_GPIO_PAR_FBCTL_TS_MASK (0xE7)
-+#define MCF_GPIO_PAR_FBCTL_TS_TS (0x18)
-+#define MCF_GPIO_PAR_FBCTL_TS_ALE (0x10)
-+#define MCF_GPIO_PAR_FBCTL_TS_TBST (0x08)
-+#define MCF_GPIO_PAR_FBCTL_TS_GPIO (0x80)
-+
-+/* Bit definitions and macros for PAR_DSPI */
-+#define MCF_GPIO_PAR_DSPI_SCK (0x01)
-+#define MCF_GPIO_PAR_DSPI_SOUT (0x02)
-+#define MCF_GPIO_PAR_DSPI_SIN (0x04)
-+#define MCF_GPIO_PAR_DSPI_PCS0 (0x08)
-+#define MCF_GPIO_PAR_DSPI_PCS1 (0x10)
-+#define MCF_GPIO_PAR_DSPI_PCS2 (0x20)
-+#define MCF_GPIO_PAR_DSPI_PCS5 (0x40)
-+#define MCF_GPIO_PAR_DSPI_PCS5_PCS5 (0x40)
-+#define MCF_GPIO_PAR_DSPI_PCS5_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI_PCS2_PCS2 (0x20)
-+#define MCF_GPIO_PAR_DSPI_PCS2_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI_PCS1_PCS1 (0x10)
-+#define MCF_GPIO_PAR_DSPI_PCS1_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI_PCS0_PCS0 (0x08)
-+#define MCF_GPIO_PAR_DSPI_PCS0_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI_SIN_SIN (0x04)
-+#define MCF_GPIO_PAR_DSPI_SIN_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI_SOUT_SOUT (0x02)
-+#define MCF_GPIO_PAR_DSPI_SOUT_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI_SCK_SCK (0x01)
-+#define MCF_GPIO_PAR_DSPI_SCK_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_BE */
-+#define MCF_GPIO_PAR_BE_BE0 (0x01)
-+#define MCF_GPIO_PAR_BE_BE1 (0x04)
-+#define MCF_GPIO_PAR_BE_BE2(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_BE_BE3(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_BE_BE3_MASK (0x3F)
-+#define MCF_GPIO_PAR_BE_BE3_BE3 (0xC0)
-+#define MCF_GPIO_PAR_BE_BE3_TSIZ1 (0x80)
-+#define MCF_GPIO_PAR_BE_BE3_GPIO (0x00)
-+#define MCF_GPIO_PAR_BE_BE2_MASK (0xCF)
-+#define MCF_GPIO_PAR_BE_BE2_BE2 (0x30)
-+#define MCF_GPIO_PAR_BE_BE2_TSIZ0 (0x20)
-+#define MCF_GPIO_PAR_BE_BE2_GPIO (0x00)
-+#define MCF_GPIO_PAR_BE_BE1_BE1 (0x04)
-+#define MCF_GPIO_PAR_BE_BE1_GPIO (0x00)
-+#define MCF_GPIO_PAR_BE_BE0_BE0 (0x01)
-+#define MCF_GPIO_PAR_BE_BE0_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_CS */
-+#define MCF_GPIO_PAR_CS_CS1 (0x02)
-+#define MCF_GPIO_PAR_CS_CS2 (0x04)
-+#define MCF_GPIO_PAR_CS_CS3 (0x08)
-+#define MCF_GPIO_PAR_CS_CS3_CS3 (0x08)
-+#define MCF_GPIO_PAR_CS_CS3_GPIO (0x00)
-+#define MCF_GPIO_PAR_CS_CS2_CS2 (0x04)
-+#define MCF_GPIO_PAR_CS_CS2_GPIO (0x00)
-+#define MCF_GPIO_PAR_CS_CS1_CS1 (0x02)
-+#define MCF_GPIO_PAR_CS_CS1_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_TIMER */
-+#define MCF_GPIO_PAR_TIMER_T0IN(x) (((x)&0x03))
-+#define MCF_GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_TIMER_T3IN_MASK (0x3F)
-+#define MCF_GPIO_PAR_TIMER_T3IN_T3IN (0xC0)
-+#define MCF_GPIO_PAR_TIMER_T3IN_T3OUT (0x80)
-+#define MCF_GPIO_PAR_TIMER_T3IN_U2RXD (0x40)
-+#define MCF_GPIO_PAR_TIMER_T3IN_GPIO (0x00)
-+#define MCF_GPIO_PAR_TIMER_T2IN_MASK (0xCF)
-+#define MCF_GPIO_PAR_TIMER_T2IN_T2IN (0x30)
-+#define MCF_GPIO_PAR_TIMER_T2IN_T2OUT (0x20)
-+#define MCF_GPIO_PAR_TIMER_T2IN_U2TXD (0x10)
-+#define MCF_GPIO_PAR_TIMER_T2IN_GPIO (0x00)
-+#define MCF_GPIO_PAR_TIMER_T1IN_MASK (0xF3)
-+#define MCF_GPIO_PAR_TIMER_T1IN_T1IN (0x0C)
-+#define MCF_GPIO_PAR_TIMER_T1IN_T1OUT (0x08)
-+#define MCF_GPIO_PAR_TIMER_T1IN_U2CTS (0x04)
-+#define MCF_GPIO_PAR_TIMER_T1IN_GPIO (0x00)
-+#define MCF_GPIO_PAR_TIMER_T0IN_MASK (0xFC)
-+#define MCF_GPIO_PAR_TIMER_T0IN_T0IN (0x03)
-+#define MCF_GPIO_PAR_TIMER_T0IN_T0OUT (0x02)
-+#define MCF_GPIO_PAR_TIMER_T0IN_U2RTS (0x01)
-+#define MCF_GPIO_PAR_TIMER_T0IN_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_USB */
-+#define MCF_GPIO_PAR_USB_VBUSOC(x) (((x)&0x03))
-+#define MCF_GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_USB_VBUSEN_MASK (0xF3)
-+#define MCF_GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C)
-+#define MCF_GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08)
-+#define MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04)
-+#define MCF_GPIO_PAR_USB_VBUSEN_GPIO (0x00)
-+#define MCF_GPIO_PAR_USB_VBUSOC_MASK (0xFC)
-+#define MCF_GPIO_PAR_USB_VBUSOC_VBUSOC (0x03)
-+#define MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01)
-+#define MCF_GPIO_PAR_USB_VBUSOC_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_UART */
-+#define MCF_GPIO_PAR_UART_U0TXD (0x01)
-+#define MCF_GPIO_PAR_UART_U0RXD (0x02)
-+#define MCF_GPIO_PAR_UART_U0RTS (0x04)
-+#define MCF_GPIO_PAR_UART_U0CTS (0x08)
-+#define MCF_GPIO_PAR_UART_U1TXD (0x10)
-+#define MCF_GPIO_PAR_UART_U1RXD (0x20)
-+#define MCF_GPIO_PAR_UART_U1RTS (0x40)
-+#define MCF_GPIO_PAR_UART_U1CTS (0x80)
-+#define MCF_GPIO_PAR_UART_U1CTS_U1CTS (0x80)
-+#define MCF_GPIO_PAR_UART_U1CTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART_U1RTS_U1RTS (0x40)
-+#define MCF_GPIO_PAR_UART_U1RTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART_U1RXD_U1RXD (0x20)
-+#define MCF_GPIO_PAR_UART_U1RXD_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART_U1TXD_U1TXD (0x10)
-+#define MCF_GPIO_PAR_UART_U1TXD_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART_U0CTS_U0CTS (0x08)
-+#define MCF_GPIO_PAR_UART_U0CTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART_U0RTS_U0RTS (0x04)
-+#define MCF_GPIO_PAR_UART_U0RTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART_U0RXD_U0RXD (0x02)
-+#define MCF_GPIO_PAR_UART_U0RXD_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART_U0TXD_U0TXD (0x01)
-+#define MCF_GPIO_PAR_UART_U0TXD_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_FECI2C */
-+#define MCF_GPIO_PAR_FECI2C_SDA(x) (((x)&0x0003))
-+#define MCF_GPIO_PAR_FECI2C_SCL(x) (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x0003))
-+#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_FECI2C_MDIO0 (0x0010)
-+#define MCF_GPIO_PAR_FECI2C_MDC0 (0x0040)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8)
-+#define MCF_GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10)
-+#define MCF_GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF)
-+#define MCF_GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00)
-+#define MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800)
-+#define MCF_GPIO_PAR_FECI2C_MDC1_GPIO (0x0000)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000)
-+#define MCF_GPIO_PAR_FECI2C_MDC0_MDC0 (0x0040)
-+#define MCF_GPIO_PAR_FECI2C_MDC0_GPIO (0x0000)
-+#define MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010)
-+#define MCF_GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000)
-+#define MCF_GPIO_PAR_FECI2C_SCL_MASK (0xFFF3)
-+#define MCF_GPIO_PAR_FECI2C_SCL_SCL (0x000C)
-+#define MCF_GPIO_PAR_FECI2C_SCL_U2TXD (0x0004)
-+#define MCF_GPIO_PAR_FECI2C_SCL_GPIO (0x0000)
-+#define MCF_GPIO_PAR_FECI2C_SDA_MASK (0xFFFC)
-+#define MCF_GPIO_PAR_FECI2C_SDA_SDA (0x0003)
-+#define MCF_GPIO_PAR_FECI2C_SDA_U2RXD (0x0001)
-+#define MCF_GPIO_PAR_FECI2C_SDA_GPIO (0x0000)
-+
-+/* Bit definitions and macros for PAR_SSI */
-+#define MCF_GPIO_PAR_SSI_MCLK (0x0001)
-+#define MCF_GPIO_PAR_SSI_STXD(x) (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4)
-+#define MCF_GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8)
-+#define MCF_GPIO_PAR_SSI_BCLK_MASK (0xFCFF)
-+#define MCF_GPIO_PAR_SSI_BCLK_BCLK (0x0300)
-+#define MCF_GPIO_PAR_SSI_BCLK_U1CTS (0x0200)
-+#define MCF_GPIO_PAR_SSI_BCLK_GPIO (0x0000)
-+#define MCF_GPIO_PAR_SSI_FS_MASK (0xFF3F)
-+#define MCF_GPIO_PAR_SSI_FS_FS (0x00C0)
-+#define MCF_GPIO_PAR_SSI_FS_U1RTS (0x0080)
-+#define MCF_GPIO_PAR_SSI_FS_GPIO (0x0000)
-+#define MCF_GPIO_PAR_SSI_SRXD_MASK (0xFFCF)
-+#define MCF_GPIO_PAR_SSI_SRXD_SRXD (0x0030)
-+#define MCF_GPIO_PAR_SSI_SRXD_U1RXD (0x0020)
-+#define MCF_GPIO_PAR_SSI_SRXD_GPIO (0x0000)
-+#define MCF_GPIO_PAR_SSI_STXD_MASK (0xFFF3)
-+#define MCF_GPIO_PAR_SSI_STXD_STXD (0x000C)
-+#define MCF_GPIO_PAR_SSI_STXD_U1TXD (0x0008)
-+#define MCF_GPIO_PAR_SSI_STXD_GPIO (0x0000)
-+#define MCF_GPIO_PAR_SSI_MCLK_MCLK (0x0001)
-+#define MCF_GPIO_PAR_SSI_MCLK_GPIO (0x0000)
-+
-+/* Bit definitions and macros for PAR_ATA */
-+#define MCF_GPIO_PAR_ATA_IORDY (0x0001)
-+#define MCF_GPIO_PAR_ATA_DMARQ (0x0002)
-+#define MCF_GPIO_PAR_ATA_RESET (0x0004)
-+#define MCF_GPIO_PAR_ATA_DA0 (0x0020)
-+#define MCF_GPIO_PAR_ATA_DA1 (0x0040)
-+#define MCF_GPIO_PAR_ATA_DA2 (0x0080)
-+#define MCF_GPIO_PAR_ATA_CS0 (0x0100)
-+#define MCF_GPIO_PAR_ATA_CS1 (0x0200)
-+#define MCF_GPIO_PAR_ATA_BUFEN (0x0400)
-+#define MCF_GPIO_PAR_ATA_BUFEN_BUFEN (0x0400)
-+#define MCF_GPIO_PAR_ATA_BUFEN_GPIO (0x0000)
-+#define MCF_GPIO_PAR_ATA_CS1_CS1 (0x0200)
-+#define MCF_GPIO_PAR_ATA_CS1_GPIO (0x0000)
-+#define MCF_GPIO_PAR_ATA_CS0_CS0 (0x0100)
-+#define MCF_GPIO_PAR_ATA_CS0_GPIO (0x0000)
-+#define MCF_GPIO_PAR_ATA_DA2_DA2 (0x0080)
-+#define MCF_GPIO_PAR_ATA_DA2_GPIO (0x0000)
-+#define MCF_GPIO_PAR_ATA_DA1_DA1 (0x0040)
-+#define MCF_GPIO_PAR_ATA_DA1_GPIO (0x0000)
-+#define MCF_GPIO_PAR_ATA_DA0_DA0 (0x0020)
-+#define MCF_GPIO_PAR_ATA_DA0_GPIO (0x0000)
-+#define MCF_GPIO_PAR_ATA_RESET_RESET (0x0004)
-+#define MCF_GPIO_PAR_ATA_RESET_GPIO (0x0000)
-+#define MCF_GPIO_PAR_ATA_DMARQ_DMARQ (0x0002)
-+#define MCF_GPIO_PAR_ATA_DMARQ_GPIO (0x0000)
-+#define MCF_GPIO_PAR_ATA_IORDY_IORDY (0x0001)
-+#define MCF_GPIO_PAR_ATA_IORDY_GPIO (0x0000)
-+
-+/* Bit definitions and macros for PAR_IRQ */
-+#define MCF_GPIO_PAR_IRQ_IRQ1 (0x02)
-+#define MCF_GPIO_PAR_IRQ_IRQ4 (0x10)
-+#define MCF_GPIO_PAR_IRQ_IRQ4_IRQ4 (0x10)
-+#define MCF_GPIO_PAR_IRQ_IRQ4_GPIO (0x00)
-+#define MCF_GPIO_PAR_IRQ_IRQ1_IRQ1 (0x02)
-+#define MCF_GPIO_PAR_IRQ_IRQ1_GPIO (0x00)
-+
-+/* Bit definitions and macros for PAR_PCI */
-+#define MCF_GPIO_PAR_PCI_REQ0 (0x0001)
-+#define MCF_GPIO_PAR_PCI_REQ1 (0x0004)
-+#define MCF_GPIO_PAR_PCI_REQ2 (0x0010)
-+#define MCF_GPIO_PAR_PCI_REQ3(x) (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_PCI_GNT0 (0x0100)
-+#define MCF_GPIO_PAR_PCI_GNT1 (0x0400)
-+#define MCF_GPIO_PAR_PCI_GNT2 (0x1000)
-+#define MCF_GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14)
-+#define MCF_GPIO_PAR_PCI_GNT3_MASK (0x3FFF)
-+#define MCF_GPIO_PAR_PCI_GNT3_GNT3 (0xC000)
-+#define MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000)
-+#define MCF_GPIO_PAR_PCI_GNT3_GPIO (0x0000)
-+#define MCF_GPIO_PAR_PCI_GNT2_GNT2 (0x1000)
-+#define MCF_GPIO_PAR_PCI_GNT2_GPIO (0x0000)
-+#define MCF_GPIO_PAR_PCI_GNT1_GNT1 (0x0400)
-+#define MCF_GPIO_PAR_PCI_GNT1_GPIO (0x0000)
-+#define MCF_GPIO_PAR_PCI_GNT0_GNT0 (0x0100)
-+#define MCF_GPIO_PAR_PCI_GNT0_GPIO (0x0000)
-+#define MCF_GPIO_PAR_PCI_REQ3_MASK (0xFF3F)
-+#define MCF_GPIO_PAR_PCI_REQ3_REQ3 (0x00C0)
-+#define MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080)
-+#define MCF_GPIO_PAR_PCI_REQ3_GPIO (0x0000)
-+#define MCF_GPIO_PAR_PCI_REQ2_REQ2 (0x0010)
-+#define MCF_GPIO_PAR_PCI_REQ2_GPIO (0x0000)
-+#define MCF_GPIO_PAR_PCI_REQ1_REQ1 (0x0040)
-+#define MCF_GPIO_PAR_PCI_REQ1_GPIO (0x0000)
-+#define MCF_GPIO_PAR_PCI_REQ0_REQ0 (0x0001)
-+#define MCF_GPIO_PAR_PCI_REQ0_GPIO (0x0000)
-+
-+/* Bit definitions and macros for MSCR_SDRAM */
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL(x) (((x)&0x03))
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR (0x00)
-+
-+/* Bit definitions and macros for MSCR_PCI */
-+#define MCF_GPIO_MSCR_PCI_PCI (0x01)
-+#define MCF_GPIO_MSCR_PCI_PCI_HI_66MHZ (0x01)
-+#define MCF_GPIO_MSCR_PCI_PCI_LO_33MHZ (0x00)
-+
-+/* Bit definitions and macros for DSCR_I2C */
-+#define MCF_GPIO_DSCR_I2C_I2C(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_FLEXBUS */
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF (0xC0)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30P (0x80)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF (0x40)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF (0x00)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF (0x30)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF (0x20)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF (0x10)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF (0x00)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF (0x0C)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF (0x08)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF (0x04)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF (0x00)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_FEC */
-+#define MCF_GPIO_DSCR_FEC_FEC0(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_FEC_FEC1(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_50PF (0x0C)
-+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_30PF (0x08)
-+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_20PF (0x04)
-+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_10PF (0x00)
-+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_UART */
-+#define MCF_GPIO_DSCR_UART_UART0(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_UART_UART1(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_DSCR_UART_UART1_LOAD_50PF (0x0C)
-+#define MCF_GPIO_DSCR_UART_UART1_LOAD_30PF (0x08)
-+#define MCF_GPIO_DSCR_UART_UART1_LOAD_20PF (0x04)
-+#define MCF_GPIO_DSCR_UART_UART1_LOAD_10PF (0x00)
-+#define MCF_GPIO_DSCR_UART_UART0_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_UART_UART0_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_UART_UART0_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_UART_UART0_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_DSPI */
-+#define MCF_GPIO_DSCR_DSPI_DSPI(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_TIMER */
-+#define MCF_GPIO_DSCR_TIMER_TIMER(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_SSI */
-+#define MCF_GPIO_DSCR_SSI_SSI(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_DMA */
-+#define MCF_GPIO_DSCR_DMA_DMA(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_DEBUG */
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_RESET */
-+#define MCF_GPIO_DSCR_RESET_RESET(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_IRQ */
-+#define MCF_GPIO_DSCR_IRQ_IRQ(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_USB */
-+#define MCF_GPIO_DSCR_USB_USB(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_USB_USB_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_USB_USB_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_USB_USB_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_USB_USB_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_ATA */
-+#define MCF_GPIO_DSCR_ATA_ATA(x) (((x)&0x03))
-+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_50PF (0x03)
-+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_30PF (0x02)
-+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_10PF (0x00)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_GPIO_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_intc.h
-@@ -0,0 +1,724 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_INTC_H__
-+#define __MCF5445X_INTC_H__
-+
-+/*********************************************************************
-+*
-+* Interrupt Controller (INTC)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_INTC0_IPRH MCF_REG32(0xFC048000)
-+#define MCF_INTC0_IPRL MCF_REG32(0xFC048004)
-+#define MCF_INTC0_IMRH MCF_REG32(0xFC048008)
-+#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C)
-+#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010)
-+#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014)
-+#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A)
-+#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C)
-+#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D)
-+#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E)
-+#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F)
-+#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041)
-+#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042)
-+#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043)
-+#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044)
-+#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045)
-+#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046)
-+#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047)
-+#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048)
-+#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049)
-+#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A)
-+#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B)
-+#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C)
-+#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D)
-+#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E)
-+#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F)
-+#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050)
-+#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051)
-+#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052)
-+#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053)
-+#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054)
-+#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055)
-+#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056)
-+#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057)
-+#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058)
-+#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059)
-+#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A)
-+#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B)
-+#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C)
-+#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D)
-+#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E)
-+#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F)
-+#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060)
-+#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061)
-+#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062)
-+#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063)
-+#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064)
-+#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065)
-+#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066)
-+#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067)
-+#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068)
-+#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069)
-+#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A)
-+#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B)
-+#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C)
-+#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D)
-+#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E)
-+#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F)
-+#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070)
-+#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071)
-+#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072)
-+#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073)
-+#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074)
-+#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075)
-+#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076)
-+#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077)
-+#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078)
-+#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079)
-+#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A)
-+#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B)
-+#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C)
-+#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D)
-+#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E)
-+#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F)
-+#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0)
-+#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4)
-+#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8)
-+#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC)
-+#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0)
-+#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4)
-+#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8)
-+#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC)
-+#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000)
-+#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004)
-+#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008)
-+#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C)
-+#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010)
-+#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014)
-+#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A)
-+#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C)
-+#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D)
-+#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E)
-+#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F)
-+#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041)
-+#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042)
-+#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043)
-+#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044)
-+#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045)
-+#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046)
-+#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047)
-+#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048)
-+#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049)
-+#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A)
-+#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B)
-+#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C)
-+#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D)
-+#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E)
-+#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F)
-+#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050)
-+#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051)
-+#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052)
-+#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053)
-+#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054)
-+#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055)
-+#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056)
-+#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057)
-+#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058)
-+#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059)
-+#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A)
-+#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B)
-+#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C)
-+#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D)
-+#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E)
-+#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F)
-+#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060)
-+#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061)
-+#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062)
-+#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063)
-+#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064)
-+#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065)
-+#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066)
-+#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067)
-+#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068)
-+#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069)
-+#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A)
-+#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B)
-+#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C)
-+#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D)
-+#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E)
-+#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F)
-+#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070)
-+#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071)
-+#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072)
-+#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073)
-+#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074)
-+#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075)
-+#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076)
-+#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077)
-+#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078)
-+#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079)
-+#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A)
-+#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B)
-+#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C)
-+#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D)
-+#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E)
-+#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F)
-+#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0)
-+#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4)
-+#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8)
-+#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC)
-+#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0)
-+#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4)
-+#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8
-+#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048041+((x-1)*0x001))
-+#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x-1)*0x004))
-+#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C041+((x-1)*0x001))
-+#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x-1)*0x004))
-+
-+/* Parameterized register read/write macros for multiple modules */
-+#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000))
-+#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000))
-+#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000))
-+#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000))
-+#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000))
-+#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000))
-+#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000))
-+#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000))
-+#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000))
-+#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000))
-+#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000))
-+#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000))
-+#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000))
-+#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000))
-+#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000))
-+#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000))
-+#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000))
-+#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000))
-+#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000))
-+#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000))
-+#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000))
-+#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000))
-+#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000))
-+#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000))
-+#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000))
-+#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000))
-+#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000))
-+#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000))
-+#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000))
-+#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000))
-+#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000))
-+#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000))
-+#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000))
-+#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000))
-+#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000))
-+#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000))
-+#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000))
-+#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000))
-+#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000))
-+#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000))
-+#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000))
-+#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000))
-+#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000))
-+#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000))
-+#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000))
-+#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000))
-+#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000))
-+#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000))
-+#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000))
-+#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000))
-+#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000))
-+#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000))
-+#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000))
-+#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000))
-+#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000))
-+#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000))
-+#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000))
-+#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000))
-+#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000))
-+#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000))
-+#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000))
-+#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000))
-+#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000))
-+#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000))
-+#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000))
-+#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000))
-+#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000))
-+#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000))
-+#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000))
-+#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000))
-+#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000))
-+#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000))
-+#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000))
-+#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000))
-+#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000))
-+#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000))
-+#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000))
-+#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000))
-+#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000))
-+#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000))
-+#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000))
-+#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000))
-+
-+/* Bit definitions and macros for IPRH */
-+#define MCF_INTC_IPRH_INT32 (0x00000001)
-+#define MCF_INTC_IPRH_INT33 (0x00000002)
-+#define MCF_INTC_IPRH_INT34 (0x00000004)
-+#define MCF_INTC_IPRH_INT35 (0x00000008)
-+#define MCF_INTC_IPRH_INT36 (0x00000010)
-+#define MCF_INTC_IPRH_INT37 (0x00000020)
-+#define MCF_INTC_IPRH_INT38 (0x00000040)
-+#define MCF_INTC_IPRH_INT39 (0x00000080)
-+#define MCF_INTC_IPRH_INT40 (0x00000100)
-+#define MCF_INTC_IPRH_INT41 (0x00000200)
-+#define MCF_INTC_IPRH_INT42 (0x00000400)
-+#define MCF_INTC_IPRH_INT43 (0x00000800)
-+#define MCF_INTC_IPRH_INT44 (0x00001000)
-+#define MCF_INTC_IPRH_INT45 (0x00002000)
-+#define MCF_INTC_IPRH_INT46 (0x00004000)
-+#define MCF_INTC_IPRH_INT47 (0x00008000)
-+#define MCF_INTC_IPRH_INT48 (0x00010000)
-+#define MCF_INTC_IPRH_INT49 (0x00020000)
-+#define MCF_INTC_IPRH_INT50 (0x00040000)
-+#define MCF_INTC_IPRH_INT51 (0x00080000)
-+#define MCF_INTC_IPRH_INT52 (0x00100000)
-+#define MCF_INTC_IPRH_INT53 (0x00200000)
-+#define MCF_INTC_IPRH_INT54 (0x00400000)
-+#define MCF_INTC_IPRH_INT55 (0x00800000)
-+#define MCF_INTC_IPRH_INT56 (0x01000000)
-+#define MCF_INTC_IPRH_INT57 (0x02000000)
-+#define MCF_INTC_IPRH_INT58 (0x04000000)
-+#define MCF_INTC_IPRH_INT59 (0x08000000)
-+#define MCF_INTC_IPRH_INT60 (0x10000000)
-+#define MCF_INTC_IPRH_INT61 (0x20000000)
-+#define MCF_INTC_IPRH_INT62 (0x40000000)
-+#define MCF_INTC_IPRH_INT63 (0x80000000)
-+
-+/* Bit definitions and macros for IPRL */
-+#define MCF_INTC_IPRL_INT0 (0x00000001)
-+#define MCF_INTC_IPRL_INT1 (0x00000002)
-+#define MCF_INTC_IPRL_INT2 (0x00000004)
-+#define MCF_INTC_IPRL_INT3 (0x00000008)
-+#define MCF_INTC_IPRL_INT4 (0x00000010)
-+#define MCF_INTC_IPRL_INT5 (0x00000020)
-+#define MCF_INTC_IPRL_INT6 (0x00000040)
-+#define MCF_INTC_IPRL_INT7 (0x00000080)
-+#define MCF_INTC_IPRL_INT8 (0x00000100)
-+#define MCF_INTC_IPRL_INT9 (0x00000200)
-+#define MCF_INTC_IPRL_INT10 (0x00000400)
-+#define MCF_INTC_IPRL_INT11 (0x00000800)
-+#define MCF_INTC_IPRL_INT12 (0x00001000)
-+#define MCF_INTC_IPRL_INT13 (0x00002000)
-+#define MCF_INTC_IPRL_INT14 (0x00004000)
-+#define MCF_INTC_IPRL_INT15 (0x00008000)
-+#define MCF_INTC_IPRL_INT16 (0x00010000)
-+#define MCF_INTC_IPRL_INT17 (0x00020000)
-+#define MCF_INTC_IPRL_INT18 (0x00040000)
-+#define MCF_INTC_IPRL_INT19 (0x00080000)
-+#define MCF_INTC_IPRL_INT20 (0x00100000)
-+#define MCF_INTC_IPRL_INT21 (0x00200000)
-+#define MCF_INTC_IPRL_INT22 (0x00400000)
-+#define MCF_INTC_IPRL_INT23 (0x00800000)
-+#define MCF_INTC_IPRL_INT24 (0x01000000)
-+#define MCF_INTC_IPRL_INT25 (0x02000000)
-+#define MCF_INTC_IPRL_INT26 (0x04000000)
-+#define MCF_INTC_IPRL_INT27 (0x08000000)
-+#define MCF_INTC_IPRL_INT28 (0x10000000)
-+#define MCF_INTC_IPRL_INT29 (0x20000000)
-+#define MCF_INTC_IPRL_INT30 (0x40000000)
-+#define MCF_INTC_IPRL_INT31 (0x80000000)
-+
-+/* Bit definitions and macros for IMRH */
-+#define MCF_INTC_IMRH_INT_MASK32 (0x00000001)
-+#define MCF_INTC_IMRH_INT_MASK33 (0x00000002)
-+#define MCF_INTC_IMRH_INT_MASK34 (0x00000004)
-+#define MCF_INTC_IMRH_INT_MASK35 (0x00000008)
-+#define MCF_INTC_IMRH_INT_MASK36 (0x00000010)
-+#define MCF_INTC_IMRH_INT_MASK37 (0x00000020)
-+#define MCF_INTC_IMRH_INT_MASK38 (0x00000040)
-+#define MCF_INTC_IMRH_INT_MASK39 (0x00000080)
-+#define MCF_INTC_IMRH_INT_MASK40 (0x00000100)
-+#define MCF_INTC_IMRH_INT_MASK41 (0x00000200)
-+#define MCF_INTC_IMRH_INT_MASK42 (0x00000400)
-+#define MCF_INTC_IMRH_INT_MASK43 (0x00000800)
-+#define MCF_INTC_IMRH_INT_MASK44 (0x00001000)
-+#define MCF_INTC_IMRH_INT_MASK45 (0x00002000)
-+#define MCF_INTC_IMRH_INT_MASK46 (0x00004000)
-+#define MCF_INTC_IMRH_INT_MASK47 (0x00008000)
-+#define MCF_INTC_IMRH_INT_MASK48 (0x00010000)
-+#define MCF_INTC_IMRH_INT_MASK49 (0x00020000)
-+#define MCF_INTC_IMRH_INT_MASK50 (0x00040000)
-+#define MCF_INTC_IMRH_INT_MASK51 (0x00080000)
-+#define MCF_INTC_IMRH_INT_MASK52 (0x00100000)
-+#define MCF_INTC_IMRH_INT_MASK53 (0x00200000)
-+#define MCF_INTC_IMRH_INT_MASK54 (0x00400000)
-+#define MCF_INTC_IMRH_INT_MASK55 (0x00800000)
-+#define MCF_INTC_IMRH_INT_MASK56 (0x01000000)
-+#define MCF_INTC_IMRH_INT_MASK57 (0x02000000)
-+#define MCF_INTC_IMRH_INT_MASK58 (0x04000000)
-+#define MCF_INTC_IMRH_INT_MASK59 (0x08000000)
-+#define MCF_INTC_IMRH_INT_MASK60 (0x10000000)
-+#define MCF_INTC_IMRH_INT_MASK61 (0x20000000)
-+#define MCF_INTC_IMRH_INT_MASK62 (0x40000000)
-+#define MCF_INTC_IMRH_INT_MASK63 (0x80000000)
-+
-+/* Bit definitions and macros for IMRL */
-+#define MCF_INTC_IMRL_INT_MASK0 (0x00000001)
-+#define MCF_INTC_IMRL_INT_MASK1 (0x00000002)
-+#define MCF_INTC_IMRL_INT_MASK2 (0x00000004)
-+#define MCF_INTC_IMRL_INT_MASK3 (0x00000008)
-+#define MCF_INTC_IMRL_INT_MASK4 (0x00000010)
-+#define MCF_INTC_IMRL_INT_MASK5 (0x00000020)
-+#define MCF_INTC_IMRL_INT_MASK6 (0x00000040)
-+#define MCF_INTC_IMRL_INT_MASK7 (0x00000080)
-+#define MCF_INTC_IMRL_INT_MASK8 (0x00000100)
-+#define MCF_INTC_IMRL_INT_MASK9 (0x00000200)
-+#define MCF_INTC_IMRL_INT_MASK10 (0x00000400)
-+#define MCF_INTC_IMRL_INT_MASK11 (0x00000800)
-+#define MCF_INTC_IMRL_INT_MASK12 (0x00001000)
-+#define MCF_INTC_IMRL_INT_MASK13 (0x00002000)
-+#define MCF_INTC_IMRL_INT_MASK14 (0x00004000)
-+#define MCF_INTC_IMRL_INT_MASK15 (0x00008000)
-+#define MCF_INTC_IMRL_INT_MASK16 (0x00010000)
-+#define MCF_INTC_IMRL_INT_MASK17 (0x00020000)
-+#define MCF_INTC_IMRL_INT_MASK18 (0x00040000)
-+#define MCF_INTC_IMRL_INT_MASK19 (0x00080000)
-+#define MCF_INTC_IMRL_INT_MASK20 (0x00100000)
-+#define MCF_INTC_IMRL_INT_MASK21 (0x00200000)
-+#define MCF_INTC_IMRL_INT_MASK22 (0x00400000)
-+#define MCF_INTC_IMRL_INT_MASK23 (0x00800000)
-+#define MCF_INTC_IMRL_INT_MASK24 (0x01000000)
-+#define MCF_INTC_IMRL_INT_MASK25 (0x02000000)
-+#define MCF_INTC_IMRL_INT_MASK26 (0x04000000)
-+#define MCF_INTC_IMRL_INT_MASK27 (0x08000000)
-+#define MCF_INTC_IMRL_INT_MASK28 (0x10000000)
-+#define MCF_INTC_IMRL_INT_MASK29 (0x20000000)
-+#define MCF_INTC_IMRL_INT_MASK30 (0x40000000)
-+#define MCF_INTC_IMRL_INT_MASK31 (0x80000000)
-+
-+/* Bit definitions and macros for INTFRCH */
-+#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001)
-+#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002)
-+#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004)
-+#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008)
-+#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010)
-+#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020)
-+#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040)
-+#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080)
-+#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100)
-+#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200)
-+#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400)
-+#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800)
-+#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000)
-+#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000)
-+#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000)
-+#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000)
-+#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000)
-+#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000)
-+#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000)
-+#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000)
-+#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000)
-+#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000)
-+#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000)
-+#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000)
-+#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000)
-+#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000)
-+#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000)
-+#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000)
-+#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000)
-+#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000)
-+#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000)
-+#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000)
-+
-+/* Bit definitions and macros for INTFRCL */
-+#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001)
-+#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002)
-+#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004)
-+#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008)
-+#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010)
-+#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020)
-+#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040)
-+#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080)
-+#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100)
-+#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200)
-+#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400)
-+#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800)
-+#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000)
-+#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000)
-+#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000)
-+#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000)
-+#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000)
-+#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000)
-+#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000)
-+#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000)
-+#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000)
-+#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000)
-+#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000)
-+#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000)
-+#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000)
-+#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000)
-+#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000)
-+#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000)
-+#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000)
-+#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000)
-+#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000)
-+#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000)
-+
-+/* Bit definitions and macros for ICONFIG */
-+#define MCF_INTC_ICONFIG_EMASK (0x0020)
-+#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200)
-+#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400)
-+#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800)
-+#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000)
-+#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000)
-+#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000)
-+#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000)
-+
-+/* Bit definitions and macros for SIMR */
-+#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F))
-+
-+/* Bit definitions and macros for CIMR */
-+#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F))
-+
-+/* Bit definitions and macros for CLMASK */
-+#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F))
-+
-+/* Bit definitions and macros for SLMASK */
-+#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F))
-+
-+/* Bit definitions and macros for ICR group */
-+#define MCF_INTC_ICR_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR1 */
-+#define MCF_INTC_ICR1_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR2 */
-+#define MCF_INTC_ICR2_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR3 */
-+#define MCF_INTC_ICR3_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR4 */
-+#define MCF_INTC_ICR4_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR5 */
-+#define MCF_INTC_ICR5_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR6 */
-+#define MCF_INTC_ICR6_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR7 */
-+#define MCF_INTC_ICR7_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR8 */
-+#define MCF_INTC_ICR8_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR9 */
-+#define MCF_INTC_ICR9_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR10 */
-+#define MCF_INTC_ICR10_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR11 */
-+#define MCF_INTC_ICR11_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR12 */
-+#define MCF_INTC_ICR12_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR13 */
-+#define MCF_INTC_ICR13_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR14 */
-+#define MCF_INTC_ICR14_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR15 */
-+#define MCF_INTC_ICR15_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR16 */
-+#define MCF_INTC_ICR16_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR17 */
-+#define MCF_INTC_ICR17_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR18 */
-+#define MCF_INTC_ICR18_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR19 */
-+#define MCF_INTC_ICR19_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR20 */
-+#define MCF_INTC_ICR20_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR21 */
-+#define MCF_INTC_ICR21_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR22 */
-+#define MCF_INTC_ICR22_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR23 */
-+#define MCF_INTC_ICR23_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR24 */
-+#define MCF_INTC_ICR24_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR25 */
-+#define MCF_INTC_ICR25_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR26 */
-+#define MCF_INTC_ICR26_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR27 */
-+#define MCF_INTC_ICR27_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR28 */
-+#define MCF_INTC_ICR28_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR29 */
-+#define MCF_INTC_ICR29_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR30 */
-+#define MCF_INTC_ICR30_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR31 */
-+#define MCF_INTC_ICR31_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR32 */
-+#define MCF_INTC_ICR32_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR33 */
-+#define MCF_INTC_ICR33_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR34 */
-+#define MCF_INTC_ICR34_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR35 */
-+#define MCF_INTC_ICR35_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR36 */
-+#define MCF_INTC_ICR36_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR37 */
-+#define MCF_INTC_ICR37_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR38 */
-+#define MCF_INTC_ICR38_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR39 */
-+#define MCF_INTC_ICR39_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR40 */
-+#define MCF_INTC_ICR40_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR41 */
-+#define MCF_INTC_ICR41_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR42 */
-+#define MCF_INTC_ICR42_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR43 */
-+#define MCF_INTC_ICR43_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR44 */
-+#define MCF_INTC_ICR44_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR45 */
-+#define MCF_INTC_ICR45_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR46 */
-+#define MCF_INTC_ICR46_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR47 */
-+#define MCF_INTC_ICR47_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR48 */
-+#define MCF_INTC_ICR48_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR49 */
-+#define MCF_INTC_ICR49_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR50 */
-+#define MCF_INTC_ICR50_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR51 */
-+#define MCF_INTC_ICR51_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR52 */
-+#define MCF_INTC_ICR52_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR53 */
-+#define MCF_INTC_ICR53_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR54 */
-+#define MCF_INTC_ICR54_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR55 */
-+#define MCF_INTC_ICR55_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR56 */
-+#define MCF_INTC_ICR56_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR57 */
-+#define MCF_INTC_ICR57_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR58 */
-+#define MCF_INTC_ICR58_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR59 */
-+#define MCF_INTC_ICR59_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR60 */
-+#define MCF_INTC_ICR60_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR61 */
-+#define MCF_INTC_ICR61_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR62 */
-+#define MCF_INTC_ICR62_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR63 */
-+#define MCF_INTC_ICR63_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for SWIACK */
-+#define MCF_INTC_SWIACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for LIACK group */
-+#define MCF_INTC_LIACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L1IACK */
-+#define MCF_INTC_L1IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L2IACK */
-+#define MCF_INTC_L2IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L3IACK */
-+#define MCF_INTC_L3IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L4IACK */
-+#define MCF_INTC_L4IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L5IACK */
-+#define MCF_INTC_L5IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L6IACK */
-+#define MCF_INTC_L6IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L7IACK */
-+#define MCF_INTC_L7IACK_VECTOR(x) (x)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_INTC_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_pci.h
-@@ -0,0 +1,238 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_PCI_H__
-+#define __MCF5445X_PCI_H__
-+
-+/*********************************************************************
-+*
-+* PCI Bus Controller (PCI)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_PCI_PCIIDR MCF_REG32(0xFC0A8000)
-+#define MCF_PCI_PCISCR MCF_REG32(0xFC0A8004)
-+#define MCF_PCI_PCICCRIR MCF_REG32(0xFC0A8008)
-+#define MCF_PCI_PCICR1 MCF_REG32(0xFC0A800C)
-+#define MCF_PCI_PCIBAR0 MCF_REG32(0xFC0A8010)
-+#define MCF_PCI_PCIBAR1 MCF_REG32(0xFC0A8014)
-+#define MCF_PCI_PCIBAR2 MCF_REG32(0xFC0A8018)
-+#define MCF_PCI_PCIBAR3 MCF_REG32(0xFC0A801C)
-+#define MCF_PCI_PCIBAR4 MCF_REG32(0xFC0A8020)
-+#define MCF_PCI_PCIBAR5 MCF_REG32(0xFC0A8024)
-+#define MCF_PCI_PCISID MCF_REG32(0xFC0A802C)
-+#define MCF_PCI_PCICR2 MCF_REG32(0xFC0A803C)
-+#define MCF_PCI_PCIGSCR MCF_REG32(0xFC0A8060)
-+#define MCF_PCI_PCITBATR0A MCF_REG32(0xFC0A8064)
-+#define MCF_PCI_PCITBATR1A MCF_REG32(0xFC0A8068)
-+#define MCF_PCI_PCITCR MCF_REG32(0xFC0A806C)
-+#define MCF_PCI_PCIIW0BTAR MCF_REG32(0xFC0A8070)
-+#define MCF_PCI_PCIIW1BTAR MCF_REG32(0xFC0A8074)
-+#define MCF_PCI_PCIIW2BTAR MCF_REG32(0xFC0A8078)
-+#define MCF_PCI_PCIIWCR MCF_REG32(0xFC0A8080)
-+#define MCF_PCI_PCIICR MCF_REG32(0xFC0A8084)
-+#define MCF_PCI_PCIISR MCF_REG32(0xFC0A8088)
-+#define MCF_PCI_PCITCR2 MCF_REG32(0xFC0A808C)
-+#define MCF_PCI_PCITBATR0 MCF_REG32(0xFC0A8090)
-+#define MCF_PCI_PCITBATR1 MCF_REG32(0xFC0A8094)
-+#define MCF_PCI_PCITBATR2 MCF_REG32(0xFC0A8098)
-+#define MCF_PCI_PCITBATR3 MCF_REG32(0xFC0A809C)
-+#define MCF_PCI_PCITBATR4 MCF_REG32(0xFC0A80A0)
-+#define MCF_PCI_PCITBATR5 MCF_REG32(0xFC0A80A4)
-+#define MCF_PCI_PCICAR MCF_REG32(0xFC0A80F8)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_PCI_PCIIWBTAR(x) MCF_REG32(0xFC0A8070+((x)*0x004))
-+
-+/* Bit definitions and macros for PCIIDR */
-+#define MCF_PCI_PCIIDR_VENDORID(x) (((x)&0x0000FFFF))
-+#define MCF_PCI_PCIIDR_DEVICEID(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for PCISCR */
-+#define MCF_PCI_PCISCR_M (0x00000002)
-+#define MCF_PCI_PCISCR_B (0x00000004)
-+#define MCF_PCI_PCISCR_SP (0x00000008)
-+#define MCF_PCI_PCISCR_MW (0x00000010)
-+#define MCF_PCI_PCISCR_PER (0x00000040)
-+#define MCF_PCI_PCISCR_S (0x00000100)
-+#define MCF_PCI_PCISCR_F (0x00000200)
-+#define MCF_PCI_PCISCR_C (0x00100000)
-+#define MCF_PCI_PCISCR_66M (0x00200000)
-+#define MCF_PCI_PCISCR_R (0x00400000)
-+#define MCF_PCI_PCISCR_FC (0x00800000)
-+#define MCF_PCI_PCISCR_DP (0x01000000)
-+#define MCF_PCI_PCISCR_DT(x) (((x)&0x00000003)<<25)
-+#define MCF_PCI_PCISCR_TS (0x08000000)
-+#define MCF_PCI_PCISCR_TR (0x10000000)
-+#define MCF_PCI_PCISCR_MA (0x20000000)
-+#define MCF_PCI_PCISCR_SE (0x40000000)
-+#define MCF_PCI_PCISCR_PE (0x80000000)
-+
-+/* Bit definitions and macros for PCICCRIR */
-+#define MCF_PCI_PCICCRIR_REVID(x) (((x)&0x000000FF))
-+#define MCF_PCI_PCICCRIR_CLASSCODE(x) (((x)&0x00FFFFFF)<<8)
-+
-+/* Bit definitions and macros for PCICR1 */
-+#define MCF_PCI_PCICR1_CACHELINESIZE(x) (((x)&0x0000000F))
-+#define MCF_PCI_PCICR1_LATTIMER(x) (((x)&0x000000FF)<<8)
-+#define MCF_PCI_PCICR1_HEADERTYPE(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCI_PCICR1_BIST(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for PCIBAR0 */
-+#define MCF_PCI_PCIBAR0_IO (0x00000001)
-+#define MCF_PCI_PCIBAR0_RANGE(x) (((x)&0x00000003)<<1)
-+#define MCF_PCI_PCIBAR0_PREF (0x00000008)
-+#define MCF_PCI_PCIBAR0_BAR0(x) (((x)&0x00003FFF)<<18)
-+
-+/* Bit definitions and macros for PCIBAR1 */
-+#define MCF_PCI_PCIBAR1_IO (0x00000001)
-+#define MCF_PCI_PCIBAR1_PREF (0x00000008)
-+#define MCF_PCI_PCIBAR1_BAR1(x) (((x)&0x00000FFF)<<20)
-+
-+/* Bit definitions and macros for PCIBAR2 */
-+#define MCF_PCI_PCIBAR2_IO (0x00000001)
-+#define MCF_PCI_PCIBAR2_RANGE(x) (((x)&0x00000003)<<1)
-+#define MCF_PCI_PCIBAR2_PREF (0x00000008)
-+#define MCF_PCI_PCIBAR2_BAR2(x) (((x)&0x000003FF)<<22)
-+
-+/* Bit definitions and macros for PCIBAR3 */
-+#define MCF_PCI_PCIBAR3_IO (0x00000001)
-+#define MCF_PCI_PCIBAR3_PREF (0x00000008)
-+#define MCF_PCI_PCIBAR3_BAR3(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for PCIBAR4 */
-+#define MCF_PCI_PCIBAR4_IO (0x00000001)
-+#define MCF_PCI_PCIBAR4_RANGE(x) (((x)&0x00000003)<<1)
-+#define MCF_PCI_PCIBAR4_PREF (0x00000008)
-+#define MCF_PCI_PCIBAR4_BAR4(x) (((x)&0x0000001F)<<27)
-+
-+/* Bit definitions and macros for PCIBAR5 */
-+#define MCF_PCI_PCIBAR5_IO (0x00000001)
-+#define MCF_PCI_PCIBAR5_PREF (0x00000008)
-+#define MCF_PCI_PCIBAR5_BAR5(x) (((x)&0x0000000F)<<28)
-+
-+/* Bit definitions and macros for PCISID */
-+#define MCF_PCI_PCISID_VENDORID(x) (((x)&0x0000FFFF))
-+#define MCF_PCI_PCISID_ID(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for PCICR2 */
-+#define MCF_PCI_PCICR2_INTLINE(x) (((x)&0x000000FF))
-+#define MCF_PCI_PCICR2_INTPIN(x) (((x)&0x000000FF)<<8)
-+#define MCF_PCI_PCICR2_MINGNT(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCI_PCICR2_MAXLAT(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for PCIGSCR */
-+#define MCF_PCI_PCIGSCR_PR (0x00000001)
-+#define MCF_PCI_PCIGSCR_SEE (0x00001000)
-+#define MCF_PCI_PCIGSCR_PEE (0x00002000)
-+#define MCF_PCI_PCIGSCR_SE (0x10000000)
-+#define MCF_PCI_PCIGSCR_PE (0x20000000)
-+
-+/* Bit definitions and macros for PCITBATR0A */
-+#define MCF_PCI_PCITBATR0A_EN (0x00000001)
-+#define MCF_PCI_PCITBATR0A_BAT0(x) (((x)&0x00003FFF)<<18)
-+
-+/* Bit definitions and macros for PCITBATR1A */
-+#define MCF_PCI_PCITBATR1A_EN (0x00000001)
-+#define MCF_PCI_PCITBATR1A_BAT1(x) (((x)&0x00000FFF)<<20)
-+
-+/* Bit definitions and macros for PCITCR */
-+#define MCF_PCI_PCITCR_WCT(x) (((x)&0x000000FF))
-+#define MCF_PCI_PCITCR_WCD (0x00000100)
-+#define MCF_PCI_PCITCR_P (0x00010000)
-+#define MCF_PCI_PCITCR_PID (0x00020000)
-+#define MCF_PCI_PCITCR_LD (0x01000000)
-+
-+/* Bit definitions and macros for PCIIWBTAR group */
-+#define MCF_PCI_PCIIWBTAR_WBA(x) ((((x)&0xFF000000)))
-+#define MCF_PCI_PCIIWBTAR_WAM(x) ((((x)&0xFF000000)
-+#define MCF_PCI_PCIIWBTAR_WTA(x) ((((x)&0xFF000000)
-+
-+/* Bit definitions and macros for PCIIW0BTAR */
-+#define MCF_PCI_PCIIW0BTAR_WBA(x) ((((x)&0xFF000000)))
-+#define MCF_PCI_PCIIW0BTAR_WAM(x) ((((x)&0xFF000000)
-+#define MCF_PCI_PCIIW0BTAR_WTA(x) ((((x)&0xFF000000)
-+
-+/* Bit definitions and macros for PCIIWCR */
-+#define MCF_PCI_PCIIWCR_WINCTRL2(x) (((x)&0x0000000F)<<8)
-+#define MCF_PCI_PCIIWCR_WINCTRL1(x) (((x)&0x0000000F)<<16)
-+#define MCF_PCI_PCIIWCR_WINCTRL0(x) (((x)&0x0000000F)<<24)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_ENABLE (0x01000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD (0x01000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDLINE (0x03000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDMUL (0x05000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_IO (0x09000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD (0x00010000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_ENABLE (0x00010000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDLINE (0x00030000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDMUL (0x00050000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_IO (0x00090000)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_ENABLE (0x00000100)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMREAD (0x00000100)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDLINE (0x00000300)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDMUL (0x00000500)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_IO (0x00000900)
-+
-+/* Bit definitions and macros for PCIICR */
-+#define MCF_PCI_PCIICR_MAXRETRY(x) (((x)&0x000000FF))
-+#define MCF_PCI_PCIICR_TAE (0x01000000)
-+#define MCF_PCI_PCIICR_IAE (0x02000000)
-+#define MCF_PCI_PCIICR_REE (0x04000000)
-+
-+/* Bit definitions and macros for PCIISR */
-+#define MCF_PCI_PCIISR_TA (0x01000000)
-+#define MCF_PCI_PCIISR_IA (0x02000000)
-+#define MCF_PCI_PCIISR_RE (0x04000000)
-+
-+/* Bit definitions and macros for PCITCR2 */
-+#define MCF_PCI_PCITCR2_CR (0x00000001)
-+#define MCF_PCI_PCITCR2_B0E (0x00000100)
-+#define MCF_PCI_PCITCR2_B1E (0x00000200)
-+#define MCF_PCI_PCITCR2_B2E (0x00000400)
-+#define MCF_PCI_PCITCR2_B3E (0x00000800)
-+#define MCF_PCI_PCITCR2_B4E (0x00001000)
-+#define MCF_PCI_PCITCR2_B5E (0x00002000)
-+
-+/* Bit definitions and macros for PCITBATR0 */
-+#define MCF_PCI_PCITBATR0_EN (0x00000001)
-+#define MCF_PCI_PCITBATR0_BAT0(x) (((x)&0x00003FFF)<<18)
-+
-+/* Bit definitions and macros for PCITBATR1 */
-+#define MCF_PCI_PCITBATR1_EN (0x00000001)
-+#define MCF_PCI_PCITBATR1_BAT1(x) (((x)&0x00000FFF)<<20)
-+
-+/* Bit definitions and macros for PCITBATR2 */
-+#define MCF_PCI_PCITBATR2_EN (0x00000001)
-+#define MCF_PCI_PCITBATR2_BAT2(x) (((x)&0x000003FF)<<22)
-+
-+/* Bit definitions and macros for PCITBATR3 */
-+#define MCF_PCI_PCITBATR3_EN (0x00000001)
-+#define MCF_PCI_PCITBATR3_BAT3(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for PCITBATR4 */
-+#define MCF_PCI_PCITBATR4_EN (0x00000001)
-+#define MCF_PCI_PCITBATR4_BAT4(x) (((x)&0x0000001F)<<27)
-+
-+/* Bit definitions and macros for PCITBATR5 */
-+#define MCF_PCI_PCITBATR5_EN (0x00000001)
-+#define MCF_PCI_PCITBATR5_BAT5(x) (((x)&0x0000000F)<<28)
-+
-+/* Bit definitions and macros for PCICAR */
-+#define MCF_PCI_PCICAR_DWORD(x) ((x)&0x000000FC)
-+#define MCF_PCI_PCICAR_FUNCNUM(x) (((x)&0x00000007)<<8)
-+#define MCF_PCI_PCICAR_DEVNUM(x) (((x)&0x0000001F)<<11)
-+#define MCF_PCI_PCICAR_BUSNUM(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCI_PCICAR_E (0x80000000)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_PCI_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_pciarb.h
-@@ -0,0 +1,40 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_PCIARB_H__
-+#define __MCF5445X_PCIARB_H__
-+
-+/*********************************************************************
-+*
-+* PCI Arbiter Module (PCIARB)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_PCIARB_PACR MCF_REG32(0xFC0AC000)
-+#define MCF_PCIARB_PASR MCF_REG32(0xFC0AC004)
-+
-+/* Bit definitions and macros for PACR */
-+#define MCF_PCIARB_PACR_INTMPRI (0x00000001)
-+#define MCF_PCIARB_PACR_EXTMPRI(x) (((x)&0x0000001F)<<1)
-+#define MCF_PCIARB_PACR_RA (0x00008000)
-+#define MCF_PCIARB_PACR_INTMINTEN (0x00010000)
-+#define MCF_PCIARB_PACR_EXTMINTEN(x) (((x)&0x0000001F)<<17)
-+#define MCF_PCIARB_PACR_PKMD (0x40000000)
-+#define MCF_PCIARB_PACR_DS (0x80000000)
-+
-+/* Bit definitions and macros for PASR */
-+#define MCF_PCIARB_PASR_ITLMBK (0x00010000)
-+#define MCF_PCIARB_PASR_EXTMBK(x) (((x)&0x0000001F)<<17)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_PCIARB_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_rtc.h
-@@ -0,0 +1,114 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Author: ChengJu Cai, B22600@freescale.com
-+ *
-+ * Description:
-+ * This file is the register definition of m5445x RTC module
-+ *
-+ * Changelog:
-+ *
-+ *
-+ * This file is part of the Linux kernel
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#ifndef __MCF5445X_RTC_H__
-+#define __MCF5445X_RTC_H__
-+
-+/*********************************************************************
-+*
-+* Real-time Clock (RTC)
-+*
-+*********************************************************************/
-+#ifndef MCFINT_VECBASE
-+#define MCFINT_VECBASE 64
-+#endif
-+
-+#define MCFSIM_ICR_RTC (0xFC048040 + 63)
-+
-+/* Register read/write macros */
-+#define MCF_RTC_HOURMIN 0xFC03C000
-+#define MCF_RTC_SECONDS 0xFC03C004
-+#define MCF_RTC_ALRM_HM 0xFC03C008
-+#define MCF_RTC_ALRM_SEC 0xFC03C00C
-+#define MCF_RTC_CR 0xFC03C010
-+#define MCF_RTC_ISR 0xFC03C014
-+#define MCF_RTC_IER 0xFC03C018
-+#define MCF_RTC_STPWCH 0xFC03C01C
-+#define MCF_RTC_DAYS 0xFC03C020
-+#define MCF_RTC_ALRM_DAY 0xFC03C024
-+#define MCF_RTC_GOCU 0xFC03C034
-+#define MCF_RTC_GOCL 0xFC03C038
-+
-+/* Bit definitions and macros for MCF_RTC_HOURMIN */
-+#define MCF_RTC_HOURMIN_MINUTES(x) (((x) & 0x0000003F) << 0)
-+#define MCF_RTC_HOURMIN_HOURS(x) (((x) & 0x0000001F) << 8)
-+
-+/* Bit definitions and macros for MCF_RTC_SECONDS */
-+#define MCF_RTC_SECONDS_SECONDS(x) (((x) & 0x0000003F) << 0)
-+
-+/* Bit definitions and macros for MCF_RTC_ALRM_HM */
-+#define MCF_RTC_ALRM_HM_MINUTES(x) (((x) & 0x0000003F) << 0)
-+#define MCF_RTC_ALRM_HM_HOURS(x) (((x) & 0x0000001F) << 8)
-+
-+/* Bit definitions and macros for MCF_RTC_ALRM_SEC */
-+#define MCF_RTC_ALRM_SEC_SECONDS(x) (((x) & 0x0000003F) << 0)
-+
-+/* Bit definitions and macros for MCF_RTC_CR */
-+#define MCF_RTC_CR_SWR 0x00000001
-+#define MCF_RTC_CR_EN 0x00000080
-+
-+/* Bit definitions and macros for MCF_RTC_ISR */
-+#define MCF_RTC_ISR_SW 0x00000001
-+#define MCF_RTC_ISR_MIN 0x00000002
-+#define MCF_RTC_ISR_ALM 0x00000004
-+#define MCF_RTC_ISR_DAY 0x00000008
-+#define MCF_RTC_ISR_1HZ 0x00000010
-+#define MCF_RTC_ISR_HR 0x00000020
-+#define MCF_RTC_ISR_2HZ 0x00000080
-+#define MCF_RTC_ISR_SAM0 0x00000100
-+#define MCF_RTC_ISR_SAM1 0x00000200
-+#define MCF_RTC_ISR_SAM2 0x00000400
-+#define MCF_RTC_ISR_SAM3 0x00000800
-+#define MCF_RTC_ISR_SAM4 0x00001000
-+#define MCF_RTC_ISR_SAM5 0x00002000
-+#define MCF_RTC_ISR_SAM6 0x00004000
-+#define MCF_RTC_ISR_SAM7 0x00008000
-+
-+/* Bit definitions and macros for MCF_RTC_IER */
-+#define MCF_RTC_IER_SW 0x00000001
-+#define MCF_RTC_IER_MIN 0x00000002
-+#define MCF_RTC_IER_ALM 0x00000004
-+#define MCF_RTC_IER_DAY 0x00000008
-+#define MCF_RTC_IER_1HZ 0x00000010
-+#define MCF_RTC_IER_HR 0x00000020
-+#define MCF_RTC_IER_2HZ 0x00000080
-+#define MCF_RTC_IER_SAM0 0x00000100
-+#define MCF_RTC_IER_SAM1 0x00000200
-+#define MCF_RTC_IER_SAM2 0x00000400
-+#define MCF_RTC_IER_SAM3 0x00000800
-+#define MCF_RTC_IER_SAM4 0x00001000
-+#define MCF_RTC_IER_SAM5 0x00002000
-+#define MCF_RTC_IER_SAM6 0x00004000
-+#define MCF_RTC_IER_SAM7 0x00008000
-+
-+/* Bit definitions and macros for MCF_RTC_STPWCH */
-+#define MCF_RTC_STPWCH_CNT(x) (((x) & 0x0000003F) << 0)
-+
-+/* Bit definitions and macros for MCF_RTC_DAYS */
-+#define MCF_RTC_DAYS_DAYS(x) (((x) & 0x0000FFFF) << 0)
-+
-+/* Bit definitions and macros for MCF_RTC_ALRM_DAY */
-+#define MCF_RTC_ALRM_DAY_DAYS(x) (((x) & 0x0000FFFF) << 0)
-+
-+/* Interrupt source */
-+#define MCFINT_RTC 63
-+/*********************************************************************/
-+
-+#endif
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_scm.h
-@@ -0,0 +1,48 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Author: ChengJu Cai<B22600@freescale.com>
-+ *
-+ * Description:
-+ * This file is the register definition of m5445x's SCM module
-+ *
-+ * Changelog:
-+ * Thur Sep 03 2009 ChengJu Cai <B22600@freescale.com>
-+ * - create
-+ *
-+ * This file is part of the Linux kernel
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+#ifndef __MCF5445X_SCM_H__
-+#define __MCF5445X_SCM_H__
-+
-+/*********************************************************************
-+*
-+* System Control Module (SCM)
-+*
-+*********************************************************************/
-+
-+/* Core Watchdog(CW) Register read/write macros */
-+#define MCF_SCM_CWCR MCF_REG16(0xFC040016) /* CW Control Register */
-+#define MCF_SCM_CWSR MCF_REG08(0xFC04001B) /* CW Service Register */
-+
-+/* CW Bit definitions and macros for SWCR */
-+#define MCF_SCM_CWCR_RO (0x8000) /* CWCR is read-only */
-+#define MCF_SCM_CWCR_CWRWR (0x0100) /* CW run when halted */
-+#define MCF_SCM_CWCR_CWE (0x0080) /* CW timer enable */
-+#define MCF_SCM_CWCR_CWRI(x) (((x) & 0x03) << 5) /* CW reset/interrupt */
-+#define MCF_SCM_CWCR_CWT(x) (((x) & 0x1F) << 0) /* CW time-out period */
-+
-+#ifdef CONFIG_M54455
-+#define MCF_GPT_MAX_TIMEOUT 16
-+#elif defined(CONFIG_M54451)
-+#define MCF_GPT_MAX_TIMEOUT 17
-+#endif
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_SCM_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_sdramc.h
-@@ -0,0 +1,142 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_SDRAMC_H__
-+#define __MCF5445X_SDRAMC_H__
-+
-+/*********************************************************************
-+*
-+* SDRAM Controller (SDRAMC)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_SDRAMC_SDMR \
-+ (*(vuint32 *)(0xFC0B8000)) /* SDRAM Mode/Extended Mode Register */
-+#define MCF_SDRAMC_SDCR \
-+ (*(vuint32 *)(0xFC0B8004)) /* SDRAM Control Register */
-+#define MCF_SDRAMC_SDCFG1 \
-+ (*(vuint32 *)(0xFC0B8008)) /* SDRAM Configuration Register 1 */
-+#define MCF_SDRAMC_SDCFG2 \
-+ (*(vuint32 *)(0xFC0B800C)) /* SDRAM Configuration Register 2 */
-+#define MCF_SDRAMC_SDCS0 \
-+ (*(vuint32 *)(0xFC0B8110)) /* SDRAM Chip Select Register */
-+#define MCF_SDRAMC_SDCS1 \
-+ (*(vuint32 *)(0xFC0B8114)) /* SDRAM Chip Select Register */
-+
-+/* Parameterized register read/write macros for multiple registers */
-+/* SDRAM Chip Select Register */
-+#define MCF_SDRAMC_SDCS(x) (*(vuint32 *)(0xFC0B8110+((x)*0x004)))
-+
-+/* Bit definitions and macros for SDMR */
-+#define MCF_SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */
-+#define MCF_SDRAMC_SDMR_CMD (0x00010000) /* Command */
-+#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */
-+#define MCF_SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */
-+#define MCF_SDRAMC_SDMR_BK_LMR (0x00000000)
-+#define MCF_SDRAMC_SDMR_BK_LEMR (0x40000000)
-+
-+/* Bit definitions and macros for SDCR */
-+#define MCF_SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */
-+#define MCF_SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */
-+#define MCF_SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */
-+#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */
-+#define MCF_SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */
-+#define MCF_SDRAMC_SDCR_REF_CNT(x) \
-+ (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */
-+#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */
-+#define MCF_SDRAMC_SDCR_ADDR_MUX(x) \
-+ (((x)&0x00000003)<<24) /* Internal Address Mux Select */
-+#define MCF_SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */
-+#define MCF_SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */
-+#define MCF_SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */
-+#define MCF_SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */
-+/* SDRAM Mode Register Programming Enable */
-+#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000)
-+#define MCF_SDRAMC_SDCR_DQS_OE_BOTH (0x00000C00)
-+
-+/* Bit definitions and macros for SDCFG1 */
-+#define MCF_SDRAMC_SDCFG1_WT_LAT(x) \
-+ (((x)&0x00000007)<<4) /* Write Latency */
-+#define MCF_SDRAMC_SDCFG1_REF2ACT(x) \
-+ (((x)&0x0000000F)<<8) /* Refresh to active delay */
-+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) \
-+ (((x)&0x00000007)<<12) /* Precharge to active delay */
-+#define MCF_SDRAMC_SDCFG1_ACT2RW(x) \
-+ (((x)&0x00000007)<<16) /* Active to read/write delay */
-+#define MCF_SDRAMC_SDCFG1_RD_LAT(x) \
-+ (((x)&0x0000000F)<<20) /* Read CAS Latency */
-+#define MCF_SDRAMC_SDCFG1_SWT2RWP(x) \
-+ (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */
-+#define MCF_SDRAMC_SDCFG1_SRD2RWP(x) \
-+ (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */
-+
-+/* Bit definitions and macros for SDCFG2 */
-+#define MCF_SDRAMC_SDCFG2_BL(x) \
-+ (((x)&0x0000000F)<<16) /* Burst Length */
-+#define MCF_SDRAMC_SDCFG2_BRD2W(x) \
-+ (((x)&0x0000000F)<<20) /* Burst read to write delay */
-+#define MCF_SDRAMC_SDCFG2_BWT2RWP(x) \
-+ (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */
-+#define MCF_SDRAMC_SDCFG2_BRD2RP(x) \
-+ (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */
-+
-+/* Bit definitions and macros for SDCS group */
-+#define MCF_SDRAMC_SDCS_CSSZ(x) \
-+ (((x)&0x0000001F)) /* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS_CSBA(x) \
-+ (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */
-+#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000)
-+#define MCF_SDRAMC_SDCS_CSSZ_DISABLE (0x00000000)
-+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013)
-+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014)
-+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015)
-+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016)
-+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017)
-+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018)
-+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019)
-+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A)
-+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B)
-+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C)
-+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D)
-+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E)
-+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
-+
-+/* Bit definitions and macros for SDCS0 */
-+#define MCF_SDRAMC_SDCS0_CSSZ(x) \
-+ (((x)&0x0000001F)) /* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS0_CSBA(x) \
-+ (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */
-+#define MCF_SDRAMC_SDCS0_BA(x) ((x)&0xFFF00000)
-+#define MCF_SDRAMC_SDCS0_CSSZ_DISABLE (0x00000000)
-+#define MCF_SDRAMC_SDCS0_CSSZ_1MBYTE (0x00000013)
-+#define MCF_SDRAMC_SDCS0_CSSZ_2MBYTE (0x00000014)
-+#define MCF_SDRAMC_SDCS0_CSSZ_4MBYTE (0x00000015)
-+#define MCF_SDRAMC_SDCS0_CSSZ_8MBYTE (0x00000016)
-+#define MCF_SDRAMC_SDCS0_CSSZ_16MBYTE (0x00000017)
-+#define MCF_SDRAMC_SDCS0_CSSZ_32MBYTE (0x00000018)
-+#define MCF_SDRAMC_SDCS0_CSSZ_64MBYTE (0x00000019)
-+#define MCF_SDRAMC_SDCS0_CSSZ_128MBYTE (0x0000001A)
-+#define MCF_SDRAMC_SDCS0_CSSZ_256MBYTE (0x0000001B)
-+#define MCF_SDRAMC_SDCS0_CSSZ_512MBYTE (0x0000001C)
-+#define MCF_SDRAMC_SDCS0_CSSZ_1GBYTE (0x0000001D)
-+#define MCF_SDRAMC_SDCS0_CSSZ_2GBYTE (0x0000001E)
-+#define MCF_SDRAMC_SDCS0_CSSZ_4GBYTE (0x0000001F)
-+
-+/* Bit definitions and macros for SDCS1 */
-+#define MCF_SDRAMC_SDCS1_CSSZ(x) \
-+ (((x)&0x0000001F)) /* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS1_CSBA(x) \
-+ (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_SDRAMC_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_ssi.h
-@@ -0,0 +1,187 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_SSI_H__
-+#define __MCF5445X_SSI_H__
-+
-+/*********************************************************************
-+*
-+* Synchronous Serial Interface (SSI)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_SSI_TX0 MCF_REG32(0xFC0BC000)
-+#define MCF_SSI_TX1 MCF_REG32(0xFC0BC004)
-+#define MCF_SSI_RX0 MCF_REG32(0xFC0BC008)
-+#define MCF_SSI_RX1 MCF_REG32(0xFC0BC00C)
-+#define MCF_SSI_CR MCF_REG32(0xFC0BC010)
-+#define MCF_SSI_ISR MCF_REG32(0xFC0BC014)
-+#define MCF_SSI_IER MCF_REG32(0xFC0BC018)
-+#define MCF_SSI_TCR MCF_REG32(0xFC0BC01C)
-+#define MCF_SSI_RCR MCF_REG32(0xFC0BC020)
-+#define MCF_SSI_CCR MCF_REG32(0xFC0BC024)
-+#define MCF_SSI_FCSR MCF_REG32(0xFC0BC02C)
-+#define MCF_SSI_ACR MCF_REG32(0xFC0BC038)
-+#define MCF_SSI_ACADD MCF_REG32(0xFC0BC03C)
-+#define MCF_SSI_ACDAT MCF_REG32(0xFC0BC040)
-+#define MCF_SSI_ATAG MCF_REG32(0xFC0BC044)
-+#define MCF_SSI_TMASK MCF_REG32(0xFC0BC048)
-+#define MCF_SSI_RMASK MCF_REG32(0xFC0BC04C)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_SSI_TX(x) MCF_REG32(0xFC0BC000+((x)*0x004))
-+#define MCF_SSI_RX(x) MCF_REG32(0xFC0BC008+((x)*0x004))
-+
-+/* Bit definitions and macros for TX group */
-+#define MCF_SSI_TX_SSI_TX(x) (x)
-+
-+/* Bit definitions and macros for TX0 */
-+#define MCF_SSI_TX0_SSI_TX(x) (x)
-+
-+/* Bit definitions and macros for TX1 */
-+#define MCF_SSI_TX1_SSI_TX(x) (x)
-+
-+/* Bit definitions and macros for RX group */
-+#define MCF_SSI_RX_SSI_RX(x) (x)
-+
-+/* Bit definitions and macros for RX0 */
-+#define MCF_SSI_RX0_SSI_RX(x) (x)
-+
-+/* Bit definitions and macros for RX1 */
-+#define MCF_SSI_RX1_SSI_RX(x) (x)
-+
-+/* Bit definitions and macros for CR */
-+#define MCF_SSI_CR_SSI_EN (0x00000001)
-+#define MCF_SSI_CR_TE (0x00000002)
-+#define MCF_SSI_CR_RE (0x00000004)
-+#define MCF_SSI_CR_NET (0x00000008)
-+#define MCF_SSI_CR_SYN (0x00000010)
-+#define MCF_SSI_CR_I2S(x) (((x)&0x00000003)<<5)
-+#define MCF_SSI_CR_MCE (0x00000080)
-+#define MCF_SSI_CR_TCH (0x00000100)
-+#define MCF_SSI_CR_CIS (0x00000200)
-+#define MCF_SSI_CR_I2S_NORMAL (0x00000000)
-+#define MCF_SSI_CR_I2S_MASTER (0x00000020)
-+#define MCF_SSI_CR_I2S_SLAVE (0x00000040)
-+
-+/* Bit definitions and macros for ISR */
-+#define MCF_SSI_ISR_TFE0 (0x00000001)
-+#define MCF_SSI_ISR_TFE1 (0x00000002)
-+#define MCF_SSI_ISR_RFF0 (0x00000004)
-+#define MCF_SSI_ISR_RFF1 (0x00000008)
-+#define MCF_SSI_ISR_RLS (0x00000010)
-+#define MCF_SSI_ISR_TLS (0x00000020)
-+#define MCF_SSI_ISR_RFS (0x00000040)
-+#define MCF_SSI_ISR_TFS (0x00000080)
-+#define MCF_SSI_ISR_TUE0 (0x00000100)
-+#define MCF_SSI_ISR_TUE1 (0x00000200)
-+#define MCF_SSI_ISR_ROE0 (0x00000400)
-+#define MCF_SSI_ISR_ROE1 (0x00000800)
-+#define MCF_SSI_ISR_TDE0 (0x00001000)
-+#define MCF_SSI_ISR_TDE1 (0x00002000)
-+#define MCF_SSI_ISR_RDR0 (0x00004000)
-+#define MCF_SSI_ISR_RDR1 (0x00008000)
-+#define MCF_SSI_ISR_RXT (0x00010000)
-+#define MCF_SSI_ISR_CMDDU (0x00020000)
-+#define MCF_SSI_ISR_CMDAU (0x00040000)
-+
-+/* Bit definitions and macros for IER */
-+#define MCF_SSI_IER_TFE0 (0x00000001)
-+#define MCF_SSI_IER_TFE1 (0x00000002)
-+#define MCF_SSI_IER_RFF0 (0x00000004)
-+#define MCF_SSI_IER_RFF1 (0x00000008)
-+#define MCF_SSI_IER_RLS (0x00000010)
-+#define MCF_SSI_IER_TLS (0x00000020)
-+#define MCF_SSI_IER_RFS (0x00000040)
-+#define MCF_SSI_IER_TFS (0x00000080)
-+#define MCF_SSI_IER_TUE0 (0x00000100)
-+#define MCF_SSI_IER_TUE1 (0x00000200)
-+#define MCF_SSI_IER_ROE0 (0x00000400)
-+#define MCF_SSI_IER_ROE1 (0x00000800)
-+#define MCF_SSI_IER_TDE0 (0x00001000)
-+#define MCF_SSI_IER_TDE1 (0x00002000)
-+#define MCF_SSI_IER_RDR0 (0x00004000)
-+#define MCF_SSI_IER_RDR1 (0x00008000)
-+#define MCF_SSI_IER_RXT (0x00010000)
-+#define MCF_SSI_IER_CMDU (0x00020000)
-+#define MCF_SSI_IER_CMDAU (0x00040000)
-+#define MCF_SSI_IER_TIE (0x00080000)
-+#define MCF_SSI_IER_TDMAE (0x00100000)
-+#define MCF_SSI_IER_RIE (0x00200000)
-+#define MCF_SSI_IER_RDMAE (0x00400000)
-+
-+/* Bit definitions and macros for TCR */
-+#define MCF_SSI_TCR_TEFS (0x00000001)
-+#define MCF_SSI_TCR_TFSL (0x00000002)
-+#define MCF_SSI_TCR_TFSI (0x00000004)
-+#define MCF_SSI_TCR_TSCKP (0x00000008)
-+#define MCF_SSI_TCR_TSHFD (0x00000010)
-+#define MCF_SSI_TCR_TXDIR (0x00000020)
-+#define MCF_SSI_TCR_TFDIR (0x00000040)
-+#define MCF_SSI_TCR_TFEN0 (0x00000080)
-+#define MCF_SSI_TCR_TFEN1 (0x00000100)
-+#define MCF_SSI_TCR_TXBIT0 (0x00000200)
-+
-+/* Bit definitions and macros for RCR */
-+#define MCF_SSI_RCR_REFS (0x00000001)
-+#define MCF_SSI_RCR_RFSL (0x00000002)
-+#define MCF_SSI_RCR_RFSI (0x00000004)
-+#define MCF_SSI_RCR_RSCKP (0x00000008)
-+#define MCF_SSI_RCR_RSHFD (0x00000010)
-+#define MCF_SSI_RCR_RFEN0 (0x00000080)
-+#define MCF_SSI_RCR_RFEN1 (0x00000100)
-+#define MCF_SSI_RCR_RXBIT0 (0x00000200)
-+#define MCF_SSI_RCR_RXEXT (0x00000400)
-+
-+/* Bit definitions and macros for CCR */
-+#define MCF_SSI_CCR_PM(x) (((x)&0x000000FF))
-+#define MCF_SSI_CCR_DC(x) (((x)&0x0000001F)<<8)
-+#define MCF_SSI_CCR_WL(x) (((x)&0x0000000F)<<13)
-+#define MCF_SSI_CCR_PSR (0x00020000)
-+#define MCF_SSI_CCR_DIV2 (0x00040000)
-+
-+/* Bit definitions and macros for FCSR */
-+#define MCF_SSI_FCSR_TFWM0(x) (((x)&0x0000000F))
-+#define MCF_SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4)
-+#define MCF_SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8)
-+#define MCF_SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12)
-+#define MCF_SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16)
-+#define MCF_SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20)
-+#define MCF_SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24)
-+#define MCF_SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28)
-+
-+/* Bit definitions and macros for ACR */
-+#define MCF_SSI_ACR_AC97EN (0x00000001)
-+#define MCF_SSI_ACR_FV (0x00000002)
-+#define MCF_SSI_ACR_TIF (0x00000004)
-+#define MCF_SSI_ACR_RD (0x00000008)
-+#define MCF_SSI_ACR_WR (0x00000010)
-+#define MCF_SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5)
-+
-+/* Bit definitions and macros for ACADD */
-+#define MCF_SSI_ACADD_SSI_ACADD(x) (((x)&0x0007FFFF))
-+
-+/* Bit definitions and macros for ACDAT */
-+#define MCF_SSI_ACDAT_SSI_ACDAT(x) (((x)&0x0007FFFF))
-+
-+/* Bit definitions and macros for ATAG */
-+#define MCF_SSI_ATAG_DDI_ATAG(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for TMASK */
-+#define MCF_SSI_TMASK_SSI_TMASK(x) (x)
-+
-+/* Bit definitions and macros for RMASK */
-+#define MCF_SSI_RMASK_SSI_RMASK(x) (x)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_SSI_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5445x_xbs.h
-@@ -0,0 +1,81 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_XBS_H__
-+#define __MCF5445X_XBS_H__
-+
-+/*
-+ * Crossbar Switch (XBS)
-+ */
-+
-+/* Register read/write macros */
-+#define MCF_XBS_PRS1 MCF_REG32(0xFC004100) /* Flexbus Priority */
-+#define MCF_XBS_CRS1 MCF_REG32(0xFC004110) /* Flexbus Control */
-+#define MCF_XBS_PRS2 MCF_REG32(0xFC004200) /* SDRam Priority */
-+#define MCF_XBS_CRS2 MCF_REG32(0xFC004210) /* SDRam Control */
-+#define MCF_XBS_PRS3 MCF_REG32(0xFC004300) /* ATA Priority */
-+#define MCF_XBS_CRS3 MCF_REG32(0xFC004310) /* ATA Control */
-+#define MCF_XBS_PRS4 MCF_REG32(0xFC004400) /* SRAM Priority */
-+#define MCF_XBS_CRS4 MCF_REG32(0xFC004410) /* SRAM Control */
-+#define MCF_XBS_PRS5 MCF_REG32(0xFC004500) /* PCI Priority */
-+#define MCF_XBS_CRS5 MCF_REG32(0xFC004510) /* PCI Control */
-+#define MCF_XBS_PRS6 MCF_REG32(0xFC004600) /* Slave6 Priority */
-+#define MCF_XBS_CRS6 MCF_REG32(0xFC004610) /* Slave6 Control */
-+#define MCF_XBS_PRS7 MCF_REG32(0xFC004700) /* Other Priority */
-+#define MCF_XBS_CRS7 MCF_REG32(0xFC004710) /* Other Control */
-+
-+/* Priorities */
-+#define MCF_XBS_PRI_1 0 /* Level 1 (highest) */
-+#define MCF_XBS_PRI_2 1 /* Level 2 */
-+#define MCF_XBS_PRI_3 2 /* Level 3 */
-+#define MCF_XBS_PRI_4 3 /* Level 4 */
-+#define MCF_XBS_PRI_5 4 /* Level 5 */
-+#define MCF_XBS_PRI_6 5 /* Level 6 */
-+#define MCF_XBS_PRI_7 6 /* Level 7 (lowest) */
-+#define MCF_XBS_PRI_MASK 7 /* Mask (Not a valid level) */
-+
-+/* Priority Register (PRSn) Defs */
-+#define MCF_XBS_PRS_MACRO(m, p) ((p)<<((m)<<2))
-+#define MCF_XBS_PRS_M0(p) MCF_XBS_PRS_MACRO(0, p) /* Coldfire Core */
-+#define MCF_XBS_PRS_M1(p) MCF_XBS_PRS_MACRO(1, p) /* eDMA */
-+#define MCF_XBS_PRS_M2(p) MCF_XBS_PRS_MACRO(2, p) /* FEC0 */
-+#define MCF_XBS_PRS_M3(p) MCF_XBS_PRS_MACRO(3, p) /* FEC1 */
-+#define MCF_XBS_PRS_M4(p) MCF_XBS_PRS_MACRO(4, p) /* Master 4 */
-+#define MCF_XBS_PRS_M5(p) MCF_XBS_PRS_MACRO(5, p) /* PCI */
-+#define MCF_XBS_PRS_M6(p) MCF_XBS_PRS_MACRO(6, p) /* USB OTG */
-+#define MCF_XBS_PRS_M7(p) MCF_XBS_PRS_MACRO(7, p) /* Serial Boot */
-+
-+/* Control Register (CRSn) Defs */
-+#define MCF_XBS_CRS_RO 0x80000000 /* Read Only */
-+#define MCF_XBS_CRS_ARB 0x00000100 /* Arbitration Mode */
-+#define MCF_XBS_CRS_PCTL 0x00000030 /* Parking Control */
-+#define MCF_XBS_CRS_PARK 0x00000007 /* Park Location */
-+
-+/* MCF_XBS_CRS_ARB Defs */
-+#define MCF_ABS_CRS_ARB_FIXED 0x00000000 /* Fixed priority */
-+#define MCF_ABS_CRS_ARB_ROUND 0x00000100 /* Round Robin priority */
-+
-+/* MCF_XBS_CRS_PCTL Defs */
-+#define MCF_ABS_CRS_PCTL_PARK 0x00000000 /* Park on the defined PARK */
-+#define MCF_ABS_CRS_PCTL_LAST 0x00000010 /* Park on the last master */
-+#define MCF_ABS_CRS_PCTL_NONE 0x00000020 /* Don't park */
-+
-+/* MCF_XBS_CRS_PARK Defs */
-+#define MCF_ABS_CRS_PARK_M0 0x00000000 /* Park on Coldfire Core */
-+#define MCF_ABS_CRS_PARK_M1 0x00000001 /* Park on eDMA */
-+#define MCF_ABS_CRS_PARK_M2 0x00000002 /* Park on FEC0 */
-+#define MCF_ABS_CRS_PARK_M3 0x00000003 /* Park on FEC1 */
-+#define MCF_ABS_CRS_PARK_M4 0x00000004 /* Park on Reserved */
-+#define MCF_ABS_CRS_PARK_M5 0x00000005 /* Park on PCI */
-+#define MCF_ABS_CRS_PARK_M6 0x00000006 /* Park on USB OTG */
-+#define MCF_ABS_CRS_PARK_M7 0x00000007 /* Park on Serial Boot */
-+
-+#endif /* __MCF5445X_XBS_H__ */
diff --git a/target/linux/coldfire/patches/003-MCF547x-and-MCF548x-support-in-Linux-2.6.38.patch b/target/linux/coldfire/patches/003-MCF547x-and-MCF548x-support-in-Linux-2.6.38.patch
deleted file mode 100644
index 08bc86f..0000000
--- a/target/linux/coldfire/patches/003-MCF547x-and-MCF548x-support-in-Linux-2.6.38.patch
+++ /dev/null
@@ -1,7673 +0,0 @@
-From b19b66d24fe96f4f79753762048328fe985351a6 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:38 +0800
-Subject: [PATCH 03/52] MCF547x and MCF548x support in Linux 2.6.38
-
-MCF547x and MCF548x support in Linux 2.6.38.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m547x/Makefile | 7 +
- arch/m68k/coldfire/m547x/config.c | 412 ++++++++
- arch/m68k/coldfire/m547x/devices.c | 176 +++
- arch/m68k/coldfire/m547x/mcf548x-devices.c | 126 +++
- arch/m68k/configs/m5474lite_defconfig | 1269 ++++++++++++++++++++++
- arch/m68k/configs/m5475evb_defconfig | 1324 +++++++++++++++++++++++
- arch/m68k/configs/m5485evb_defconfig | 1582 ++++++++++++++++++++++++++++
- arch/m68k/include/asm/cf_548x_cacheflush.h | 262 +++++
- arch/m68k/include/asm/m5485dma.h | 98 ++
- arch/m68k/include/asm/m5485dspi.h | 146 +++
- arch/m68k/include/asm/m5485gpio.h | 695 ++++++++++++
- arch/m68k/include/asm/m5485gpt.h | 90 ++
- arch/m68k/include/asm/m5485pci.h | 380 +++++++
- arch/m68k/include/asm/m5485psc.h | 475 +++++++++
- arch/m68k/include/asm/m5485sec.h | 177 ++++
- arch/m68k/include/asm/m5485sim.h | 346 ++++++
- arch/m68k/include/asm/m5485sram.h | 12 +
- 17 files changed, 7577 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/coldfire/m547x/Makefile
- create mode 100644 arch/m68k/coldfire/m547x/config.c
- create mode 100644 arch/m68k/coldfire/m547x/devices.c
- create mode 100644 arch/m68k/coldfire/m547x/mcf548x-devices.c
- create mode 100644 arch/m68k/configs/m5474lite_defconfig
- create mode 100644 arch/m68k/configs/m5475evb_defconfig
- create mode 100644 arch/m68k/configs/m5485evb_defconfig
- create mode 100644 arch/m68k/include/asm/cf_548x_cacheflush.h
- create mode 100644 arch/m68k/include/asm/m5485dma.h
- create mode 100644 arch/m68k/include/asm/m5485dspi.h
- create mode 100644 arch/m68k/include/asm/m5485gpio.h
- create mode 100644 arch/m68k/include/asm/m5485gpt.h
- create mode 100644 arch/m68k/include/asm/m5485pci.h
- create mode 100644 arch/m68k/include/asm/m5485psc.h
- create mode 100644 arch/m68k/include/asm/m5485sec.h
- create mode 100644 arch/m68k/include/asm/m5485sim.h
- create mode 100644 arch/m68k/include/asm/m5485sram.h
-
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x/Makefile
-@@ -0,0 +1,7 @@
-+#
-+# Makefile for Linux arch/m68k/coldfire/m547x source directory
-+#
-+
-+obj-$(CONFIG_M547X_8X) += config.o mcf548x-devices.o devices.o
-+obj-$(CONFIG_PCI) += pci.o pci_dummy.o
-+obj-$(CONFIG_MCD_DMA) += dma.o
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x/config.c
-@@ -0,0 +1,412 @@
-+/*
-+ * linux/arch/m68k/coldfire/config.c
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan kmahan@freescale.com
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/console.h>
-+#include <linux/bootmem.h>
-+#include <linux/mm.h>
-+#include <linux/clockchips.h>
-+#include <asm/bootinfo.h>
-+#include <asm/machdep.h>
-+#include <asm/coldfire.h>
-+#include <asm/cfcache.h>
-+#include <asm/cacheflush.h>
-+#include <linux/io.h>
-+#include <asm/cfmmu.h>
-+#include <asm/setup.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+#include <asm/movs.h>
-+#include <asm/movs.h>
-+#include <asm/page.h>
-+#include <asm/pgalloc.h>
-+
-+#include <asm/mcfsim.h>
-+
-+#define UBOOT_PCI
-+#include <asm/bootinfo.h>
-+#include <asm/m5485gpt.h>
-+
-+extern int get_irq_list(struct seq_file *p, void *v);
-+extern char _text, _end;
-+extern char _etext, _edata, __init_begin, __init_end;
-+extern struct console mcfrs_console;
-+extern char m68k_command_line[CL_SIZE];
-+extern unsigned long availmem;
-+extern struct mem_info m68k_ramdisk;
-+
-+static int irq_enable[NR_IRQS];
-+unsigned long num_pages;
-+
-+/* cf dma physical addresses */
-+unsigned long cf_dma_base;
-+EXPORT_SYMBOL(cf_dma_base);
-+unsigned long cf_dma_end;
-+EXPORT_SYMBOL(cf_dma_end);
-+unsigned long cf_dma_size;
-+EXPORT_SYMBOL(cf_dma_size);
-+
-+/* ethernet mac addresses from uboot */
-+unsigned char uboot_enet0[6];
-+unsigned char uboot_enet1[6];
-+
-+void coldfire_sort_memrec(void)
-+{
-+ int i, j;
-+
-+ /* Sort the m68k_memory records by address */
-+ for (i = 0; i < m68k_num_memory; ++i) {
-+ for (j = i + 1; j < m68k_num_memory; ++j) {
-+ if (m68k_memory[i].addr > m68k_memory[j].addr) {
-+ struct mem_info tmp;
-+ tmp = m68k_memory[i];
-+ m68k_memory[i] = m68k_memory[j];
-+ m68k_memory[j] = tmp;
-+ }
-+ }
-+ }
-+ /* Trim off discontiguous bits */
-+ for (i = 1; i < m68k_num_memory; ++i) {
-+ if ((m68k_memory[i-1].addr + m68k_memory[i-1].size) !=
-+ m68k_memory[i].addr) {
-+ printk(KERN_DEBUG "m68k_parse_bootinfo: "
-+ "addr gap between 0x%lx & 0x%lx\n",
-+ m68k_memory[i-1].addr+m68k_memory[i-1].size,
-+ m68k_memory[i].addr);
-+ m68k_num_memory = i;
-+ break;
-+ }
-+ }
-+}
-+
-+/*
-+ * UBoot Handler
-+ */
-+int __init uboot_commandline(char *bootargs)
-+{
-+ int len = 0, cmd_line_len;
-+ static struct uboot_record uboot_info;
-+ u32 offset = PAGE_OFFSET_RAW - PHYS_OFFSET;
-+
-+ extern unsigned long uboot_info_stk;
-+
-+ /* validate address */
-+ if ((uboot_info_stk < PAGE_OFFSET_RAW) ||
-+ (uboot_info_stk >= (PAGE_OFFSET_RAW + CONFIG_SDRAM_SIZE)))
-+ return 0;
-+
-+ /* Add offset to get post-remapped kernel memory location */
-+ uboot_info.bdi = (struct bd_info *)((*(u32 *)(uboot_info_stk))
-+ + offset);
-+ uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + offset;
-+ uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + offset;
-+ uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset;
-+ uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset;
-+
-+#if defined(CONFIG_BLK_DEV_INITRD)
-+ m68k_ramdisk.addr = uboot_info.initrd_start;
-+ m68k_ramdisk.size = (uboot_info.initrd_end - uboot_info.initrd_start) ?
-+ (uboot_info.initrd_end - uboot_info.initrd_start + 1) : 0;
-+#endif
-+
-+ /* copy over mac addresses */
-+ memcpy(uboot_enet0, uboot_info.bdi->bi_enet0addr, 6);
-+ memcpy(uboot_enet1, uboot_info.bdi->bi_enet1addr, 6);
-+
-+ /* copy command line */
-+ cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start;
-+ if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1))
-+ len = (int)strncpy(bootargs, (char *)uboot_info.cmd_line_start,\
-+ cmd_line_len);
-+
-+ return len;
-+}
-+
-+/*
-+ * This routine does things not done in the bootloader.
-+ */
-+#define DEFAULT_COMMAND_LINE \
-+ "debug root=/dev/nfs rw \
-+ nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ \
-+ ip=172.27.155.75:172.27.155.1"
-+
-+asmlinkage void __init cf_early_init(void)
-+{
-+ SET_VBR((void *)MCF_RAMBAR0);
-+
-+ /* Mask all interrupts */
-+ MCF_IMRL = 0xFFFFFFFF;
-+ MCF_IMRH = 0xFFFFFFFF;
-+
-+ m68k_machtype = MACH_CFMMU;
-+ m68k_fputype = FPU_CFV4E;
-+ m68k_mmutype = MMU_CFV4E;
-+ m68k_cputype = CPU_CFV4E;
-+
-+ m68k_num_memory = 0;
-+ m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE;
-+ m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
-+
-+ if (!uboot_commandline(m68k_command_line)) {
-+#if defined(CONFIG_BOOTPARAM)
-+ strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
-+#else
-+ strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
-+#endif
-+ }
-+
-+ /* Invalidate caches via CACR */
-+ flush_bcache();
-+ cacr_set(CACHE_DISABLE_MODE);
-+
-+ /* Turn on caches via CACR, enable EUSP */
-+ cacr_set(CACHE_INITIAL_MODE);
-+}
-+
-+/* Assembler routines */
-+asmlinkage void buserr(void);
-+asmlinkage void trap(void);
-+asmlinkage void system_call(void);
-+asmlinkage void inthandler(void);
-+
-+void __init coldfire_trap_init(void)
-+{
-+ int i = 0;
-+ e_vector *vectors;
-+
-+ vectors = (e_vector *)MCF_RAMBAR0;
-+ /*
-+ * There is a common trap handler and common interrupt
-+ * handler that handle almost every vector. We treat
-+ * the system call and bus error special, they get their
-+ * own first level handlers.
-+ */
-+ for (i = 3; (i <= 23); i++)
-+ vectors[i] = trap;
-+ for (i = 33; (i <= 63); i++)
-+ vectors[i] = trap;
-+ for (i = 24; (i <= 31); i++)
-+ vectors[i] = inthandler;
-+ for (i = 64; (i < 255); i++)
-+ vectors[i] = inthandler;
-+
-+ vectors[255] = 0;
-+ vectors[2] = buserr;
-+ vectors[32] = system_call;
-+}
-+
-+void coldfire_tick(void)
-+{
-+ /* Reset the ColdFire timer */
-+ MCF_SSR(0) = MCF_SSR_ST;
-+}
-+
-+void __init coldfire_sched_init(irq_handler_t handler)
-+{
-+ int irq = ISC_SLTn(0);
-+
-+ MCF_SCR(0) = 0;
-+ MCF_ICR(irq) = ILP_SLT0;
-+ request_irq(64 + irq, handler, IRQF_DISABLED, "ColdFire Timer 0", NULL);
-+ MCF_SLTCNT(0) = MCF_BUSCLK / HZ;
-+ MCF_SCR(0) |= MCF_SCR_TEN | MCF_SCR_IEN | MCF_SCR_RUN;
-+}
-+
-+unsigned long coldfire_gettimeoffset(void)
-+{
-+ volatile unsigned long trr, tcn, offset;
-+ trr = MCF_SLTCNT(0);
-+ tcn = MCF_SCNT(0);
-+
-+ offset = (trr - tcn) * ((1000000 >> 3) / HZ) / (trr >> 3);
-+ if (MCF_SSR(0) & MCF_SSR_ST)
-+ offset += 1000000 / HZ;
-+
-+ return offset;
-+}
-+
-+static unsigned long long sched_dtim_clk_val;
-+
-+unsigned long long sched_clock(void)
-+{
-+ unsigned long flags;
-+ unsigned long long cycles;
-+ volatile unsigned long trr, tcn, offset;
-+
-+ local_irq_save(flags);
-+ trr = MCF_SLTCNT(0);
-+ tcn = MCF_SCNT(0);
-+ offset = (trr - tcn);
-+ cycles = sched_dtim_clk_val;
-+ local_irq_restore(flags);
-+
-+ return cycles + offset;
-+}
-+
-+unsigned long long sys_dtim2_read(void)
-+{
-+ unsigned long flags;
-+ unsigned long long cycles;
-+ volatile unsigned long trr, tcn, offset;
-+
-+ local_irq_save(flags);
-+ trr = MCF_SLTCNT(0);
-+ tcn = MCF_SCNT(0);
-+ offset = (trr - tcn);
-+ cycles = sched_dtim_clk_val;
-+ local_irq_restore(flags);
-+
-+ return cycles + offset;
-+}
-+
-+static irqreturn_t coldfire_dtim_clk_irq(int irq, void *dev)
-+{
-+ struct clock_event_device *evt =
-+ (struct clock_event_device *)dev;
-+
-+ MCF_SSR(0) = MCF_SSR_ST;
-+ sched_dtim_clk_val += (MCF_BUSCLK) / HZ;
-+ evt->event_handler(evt);
-+ return IRQ_HANDLED;
-+}
-+
-+void sys_dtim2_init(struct clock_event_device *evt)
-+{
-+ int irq = ISC_SLTn(0);
-+
-+ sched_dtim_clk_val = 0;
-+ MCF_SCR(0) = 0;
-+ MCF_ICR(irq) = ILP_SLT0;
-+ request_irq(64 + irq, coldfire_dtim_clk_irq, IRQF_DISABLED,
-+ "ColdFire Timer 0", (void *)evt);
-+ MCF_SLTCNT(0) = MCF_BUSCLK / HZ;
-+ MCF_SCR(0) |= MCF_SCR_TEN | MCF_SCR_IEN | MCF_SCR_RUN;
-+}
-+
-+void coldfire_reboot(void)
-+{
-+ /* disable interrupts and enable the watchdog */
-+ printk(KERN_INFO "Rebooting\n");
-+
-+ /*Disable the XLB priority settings, then set the core to same priority
-+ * level as other XLB masters, also disable the PCI here, otherwise the
-+ * watchdog may fail to reset.
-+ */
-+ MCF_XARB_PRIEN = 0;
-+ MCF_SPCR &= ~0x02;
-+ asm("tpf");
-+ asm("movew #0x2700, %sr\n");
-+ MCF_GPT_GMS0 = MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4);
-+ MCF_GPT_GCIR0 = (0x0A << 16) | 0x03;
-+}
-+
-+static void coldfire_get_model(char *model)
-+{
-+ sprintf(model, "Version 4 ColdFire");
-+}
-+
-+static void __init
-+coldfire_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
-+{
-+ unsigned long base_pfn;
-+
-+ /* compute total pages in system */
-+ num_pages = PAGE_ALIGN(memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
-+
-+ /* align start/end to page boundries */
-+ memory_start = PAGE_ALIGN(memory_start);
-+ memory_end = memory_end & PAGE_MASK;
-+
-+ /* page numbers */
-+ base_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
-+ min_low_pfn = __pa(memory_start) >> PAGE_SHIFT;
-+ max_low_pfn = __pa(memory_end) >> PAGE_SHIFT;
-+
-+ high_memory = (void *)memory_end;
-+ availmem = memory_start;
-+
-+ /* setup bootmem data */
-+ m68k_setup_node(0);
-+ availmem += init_bootmem_node(NODE_DATA(0), min_low_pfn,
-+ base_pfn, max_low_pfn);
-+ availmem = PAGE_ALIGN(availmem);
-+
-+ printk(KERN_INFO "** availmem=0x%lx pa(am)=0x%lx\n",
-+ availmem, __pa(availmem));
-+ printk(KERN_INFO "** mstart=0x%lx mend=0x%lx\n",
-+ memory_start, memory_end);
-+ printk(KERN_INFO "bpfn=0x%lx minpfn=0x%lx maxpfn=0x%lx\n",
-+ base_pfn, min_low_pfn, max_low_pfn);
-+
-+ /* turn over physram */
-+ free_bootmem(__pa(availmem), memory_end - (availmem));
-+
-+ /* configure physical dma area */
-+ cf_dma_base = __pa(PAGE_ALIGN(memory_start));
-+ cf_dma_size = CONFIG_DMA_SIZE;
-+ cf_dma_end = CONFIG_SDRAM_BASE + cf_dma_size - 1;
-+
-+ printk(KERN_INFO "dma: phys base=0x%lx phys end=0x%lx virt base=0x%x\n",
-+ cf_dma_base, cf_dma_end, CONFIG_DMA_BASE);
-+
-+ printk(KERN_INFO "mdma=0x%x pa(mdma)=0x%lx\n",
-+ MAX_DMA_ADDRESS, __pa(MAX_DMA_ADDRESS));
-+}
-+
-+void __init config_coldfire(void)
-+{
-+ unsigned long endmem, startmem;
-+ int i;
-+
-+ /*
-+ * Calculate endmem from m68k_memory, assume all are contiguous
-+ */
-+ startmem = ((((int) &_end) + (PAGE_SIZE - 1)) & PAGE_MASK);
-+ endmem = PAGE_OFFSET;
-+ for (i = 0; i < m68k_num_memory; ++i)
-+ endmem += m68k_memory[i].size;
-+
-+ printk(KERN_INFO "starting up linux startmem 0x%lx, endmem 0x%lx, \
-+ size %luMB\n", startmem, endmem, (endmem - startmem) >> 20);
-+
-+ memset(irq_enable, 0, sizeof(irq_enable));
-+
-+ /*
-+ * Setup coldfire mach-specific handlers
-+ */
-+ mach_max_dma_address = 0xffffffff;
-+ mach_sched_init = coldfire_sched_init;
-+ mach_tick = coldfire_tick;
-+ mach_gettimeoffset = coldfire_gettimeoffset;
-+ mach_reset = coldfire_reboot;
-+ mach_get_model = coldfire_get_model;
-+
-+ coldfire_bootmem_alloc(startmem, endmem-1);
-+
-+#if defined(CONFIG_DUMMY_CONSOLE) || defined(CONFIG_FRAMEBUFFER_CONSOLE)
-+ conswitchp = &dummy_con;
-+#endif
-+
-+#if defined(CONFIG_SERIAL_COLDFIRE)
-+ /*
-+ * This causes trouble when it is re-registered later.
-+ * Currently this is fixed by conditionally commenting
-+ * out the register_console in mcf_serial.c
-+ */
-+ register_console(&mcfrs_console);
-+#endif
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x/devices.c
-@@ -0,0 +1,176 @@
-+/*
-+ * arch/m68k/coldfire/m547x/devices.c
-+ *
-+ * Coldfire M547x/M548x Platform Device Configuration
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Kurt Mahan <kmahan@freescale.com>
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/spi/spi.h>
-+#include <linux/i2c.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfqspi.h>
-+
-+
-+#ifdef CONFIG_SPI
-+/*
-+ *
-+ * DSPI
-+ *
-+ */
-+
-+/* number of supported SPI selects */
-+#define SPI_NUM_CHIPSELECTS 8
-+
-+void coldfire_spi_cs_control(u8 cs, u8 command)
-+{
-+ /* nothing special required */
-+}
-+
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+static struct coldfire_spi_chip spidev_chip_info = {
-+ .bits_per_word = 8,
-+};
-+#endif
-+
-+static struct spi_board_info spi_board_info[] = {
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+ {
-+ .modalias = "spidev",
-+ .max_speed_hz = 16000000, /* max clk (SCK) speed in HZ */
-+ .bus_num = 1,
-+ .chip_select = 0, /* CS0 */
-+ .controller_data = &spidev_chip_info,
-+ }
-+#endif
-+};
-+
-+static int spi_irq_list[] = {
-+ /* IRQ, ICR Offset, ICR Val,Mask */
-+ 64 + ISC_DSPI_OVRFW, ISC_DSPI_OVRFW, 0x18, 0,
-+ 64 + ISC_DSPI_RFOF, ISC_DSPI_RFOF, 0x18, 0,
-+ 64 + ISC_DSPI_RFDF, ISC_DSPI_RFDF, 0x18, 0,
-+ 64 + ISC_DSPI_TFUF, ISC_DSPI_TFUF, 0x18, 0,
-+ 64 + ISC_DSPI_TCF, ISC_DSPI_TCF, 0x18, 0,
-+ 64 + ISC_DSPI_TFFF, ISC_DSPI_TFFF, 0x18, 0,
-+ 64 + ISC_DSPI_EOQF, ISC_DSPI_EOQF, 0x18, 0,
-+ 0, 0, 0, 0,
-+};
-+
-+static struct coldfire_spi_master coldfire_master_info = {
-+ .bus_num = 1,
-+ .num_chipselect = SPI_NUM_CHIPSELECTS,
-+ .irq_list = spi_irq_list,
-+ .irq_source = 0, /* not used */
-+ .irq_vector = 0, /* not used */
-+ .irq_mask = 0, /* not used */
-+ .irq_lp = 0, /* not used */
-+ .par_val = 0, /* not used */
-+ .cs_control = coldfire_spi_cs_control,
-+};
-+
-+static struct resource coldfire_spi_resources[] = {
-+ [0] = {
-+ .name = "spi-par",
-+ .start = MCF_MBAR + 0x00000a50, /* PAR_DSPI */
-+ .end = MCF_MBAR + 0x00000a50, /* PAR_DSPI */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [1] = {
-+ .name = "spi-module",
-+ .start = MCF_MBAR + 0x00008a00, /* DSPI MCR Base */
-+ .end = MCF_MBAR + 0x00008ab8, /* DSPI mem map end */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [2] = {
-+ .name = "spi-int-level",
-+ .start = MCF_MBAR + 0x740, /* ICR start */
-+ .end = MCF_MBAR + 0x740 + ISC_DSPI_EOQF, /* ICR end */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [3] = {
-+ .name = "spi-int-mask",
-+ .start = MCF_MBAR + 0x70c, /* IMRL */
-+ .end = MCF_MBAR + 0x70c, /* IMRL */
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct platform_device coldfire_spi = {
-+ .name = "spi_coldfire",
-+ .id = -1,
-+ .resource = coldfire_spi_resources,
-+ .num_resources = ARRAY_SIZE(coldfire_spi_resources),
-+ .dev = {
-+ .platform_data = &coldfire_master_info,
-+ }
-+};
-+
-+/**
-+ * m547x_8x_spi_init - Initialize SPI
-+ */
-+static int __init m547x_8x_spi_init(void)
-+{
-+ int retval;
-+
-+ /* initialize the DSPI PAR */
-+ MCF_GPIO_PAR_DSPI = (MCF_GPIO_PAR_DSPI_PAR_CS5 |
-+ MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS |
-+ MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS |
-+ MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS |
-+ MCF_GPIO_PAR_DSPI_PAR_SCK_SCK |
-+ MCF_GPIO_PAR_DSPI_PAR_SIN_SIN |
-+ MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT);
-+
-+ /* register device */
-+ retval = platform_device_register(&coldfire_spi);
-+ if (retval < 0)
-+ goto out;
-+
-+ /* register board info */
-+ if (ARRAY_SIZE(spi_board_info))
-+ retval = spi_register_board_info(spi_board_info,
-+ ARRAY_SIZE(spi_board_info));
-+
-+out:
-+ return retval;
-+}
-+#endif
-+
-+#ifdef CONFIG_I2C_BOARDINFO
-+static struct i2c_board_info mcf_i2c_devices[] = {
-+ {
-+ I2C_BOARD_INFO("rv5c387a", 0x32),
-+ },
-+};
-+#endif
-+
-+/**
-+ * m547x_8x_init_devices - Initialize M547X_8X devices
-+ *
-+ * Returns 0 on success.
-+ */
-+static int __init m547x_8x_init_devices(void)
-+{
-+#ifdef CONFIG_SPI
-+ m547x_8x_spi_init();
-+#endif
-+#ifdef CONFIG_I2C_BOARDINFO
-+ i2c_register_board_info(0, mcf_i2c_devices,
-+ ARRAY_SIZE(mcf_i2c_devices));
-+#endif
-+
-+ return 0;
-+}
-+arch_initcall(m547x_8x_init_devices);
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x/mcf548x-devices.c
-@@ -0,0 +1,126 @@
-+/*
-+ * arch/m68k/coldfire/m547x/mcf548x-devices.c
-+ *
-+ * Coldfire M548x Platform Device Configuration
-+ *
-+ * Based on the Freescale MXC devices.c
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Kurt Mahan <kmahan@freescale.com>
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfuart.h>
-+
-+static struct resource coldfire_i2c_resources[] = {
-+ { /* I/O */
-+ .start = MCF_MBAR + 0x008F00,
-+ .end = MCF_MBAR + 0x008F20,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ { /* IRQ */
-+ .start = 40,
-+ .end = 40,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device coldfire_i2c_device = {
-+ .name = "mcf-i2c",
-+ .id = 0, /*bus number*/
-+ .num_resources = ARRAY_SIZE(coldfire_i2c_resources),
-+ .resource = coldfire_i2c_resources,
-+};
-+
-+static struct resource coldfire_sec_resources[] = {
-+ [0] = { /* I/O */
-+ .start = MCF_MBAR + 0x00020000,
-+ .end = MCF_MBAR + 0x00033000,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [2] = { /* IRQ */
-+ .start = ISC_SEC,
-+ .end = ISC_SEC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device coldfire_sec_device = {
-+ .name = "fsl-sec1",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(coldfire_sec_resources),
-+ .resource = coldfire_sec_resources,
-+};
-+
-+static int __init mcf5485_init_devices(void)
-+{
-+ printk(KERN_INFO "MCF5485x INIT_DEVICES\n");
-+
-+ platform_device_register(&coldfire_i2c_device);
-+ platform_device_register(&coldfire_sec_device);
-+ return 0;
-+}
-+arch_initcall(mcf5485_init_devices);
-+
-+static struct mcf_platform_uart m548x_uart_platform[] = {
-+ {
-+ .mapbase = MCF_MBAR + MCFUART_BASE1,
-+ .irq = MCFINT_VECBASE + MCFINT_UART0,
-+ },
-+ {
-+ .mapbase = MCF_MBAR + MCFUART_BASE2,
-+ .irq = MCFINT_VECBASE + MCFINT_UART1,
-+ },
-+ {
-+ .mapbase = MCF_MBAR + MCFUART_BASE3,
-+ .irq = MCFINT_VECBASE + MCFINT_UART2,
-+ },
-+ {
-+ .mapbase = MCF_MBAR + MCFUART_BASE4,
-+ .irq = MCFINT_VECBASE + MCFINT_UART3,
-+ },
-+ { },
-+};
-+
-+static struct platform_device m548x_uart = {
-+ .name = "mcfuart",
-+ .id = 0,
-+ .dev.platform_data = m548x_uart_platform,
-+};
-+
-+static struct platform_device *m548x_devices[] __initdata = {
-+ &m548x_uart,
-+};
-+
-+void m548x_uarts_init(void)
-+{
-+ const int nrlines = ARRAY_SIZE(m548x_uart_platform);
-+ int line;
-+
-+ /* Set GPIO port register to enable PSC(port) signals */
-+ for (line = 0; (line < nrlines); line++) {
-+ MCF_PAR_PSCn(line) = (0
-+ | MCF_PAR_PSC_TXD
-+ | MCF_PAR_PSC_RXD);
-+
-+ MCF_ICR(m548x_uart_platform[line].irq - 64) = ILP_PSCn(line);
-+ }
-+}
-+/***************************************************************************/
-+
-+static int __init init_BSP(void)
-+{
-+ m548x_uarts_init();
-+ platform_add_devices(m548x_devices, ARRAY_SIZE(m548x_devices));
-+ return 0;
-+}
-+
-+arch_initcall(init_BSP);
---- /dev/null
-+++ b/arch/m68k/configs/m5474lite_defconfig
-@@ -0,0 +1,1269 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.29
-+# Tue Aug 24 16:17:48 2010
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+# CONFIG_TIME_LOW_RES is not set
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+
-+#
-+# RCU Subsystem
-+#
-+CONFIG_CLASSIC_RCU=y
-+# CONFIG_TREE_RCU is not set
-+# CONFIG_PREEMPT_RCU is not set
-+# CONFIG_TREE_RCU_TRACE is not set
-+# CONFIG_PREEMPT_RCU_TRACE is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+# CONFIG_CGROUPS is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_NET_NS is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_ANON_INODES=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_PCI_QUIRKS=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_FREEZER is not set
-+
-+#
-+# Platform dependent setup
-+#
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+# CONFIG_FPU is not set
-+CONFIG_MCD_DMA=y
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+CONFIG_PCI=y
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+# CONFIG_SUN3 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+# CONFIG_M5445X is not set
-+# CONFIG_HAVE_FSL_USB_DR is not set
-+CONFIG_M547X_8X=y
-+CONFIG_M547X=y
-+# CONFIG_M548X is not set
-+CONFIG_M5474LITE=y
-+# CONFIG_M5475AFE is not set
-+# CONFIG_M5475BFE is not set
-+# CONFIG_M5475CFE is not set
-+# CONFIG_M5475DFE is not set
-+# CONFIG_M5475EFE is not set
-+# CONFIG_M5475FFE is not set
-+# CONFIG_M5484LITE is not set
-+# CONFIG_M5485AFE is not set
-+# CONFIG_M5485BFE is not set
-+# CONFIG_M5485CFE is not set
-+# CONFIG_M5485DFE is not set
-+# CONFIG_M5485EFE is not set
-+# CONFIG_M5485FFE is not set
-+# CONFIG_M5441X is not set
-+CONFIG_MCFCLK=266000000
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x00000000
-+CONFIG_SDRAM_SIZE=0x04000000
-+CONFIG_NOR_FLASH_BASE=0xFF800000
-+CONFIG_DMA_BASE=0xef000000
-+CONFIG_DMA_SIZE=0x800000
-+CONFIG_VDSO=y
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_UNEVICTABLE_LRU=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+CONFIG_PCI_LEGACY=y
-+# CONFIG_PCI_STUB is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_COMPAT_NET_DEV_OPS=y
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+# CONFIG_DCB is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+CONFIG_CAN=y
-+CONFIG_CAN_RAW=y
-+# CONFIG_CAN_BCM is not set
-+
-+#
-+# CAN Device Drivers
-+#
-+# CONFIG_CAN_VCAN is not set
-+# CONFIG_CAN_DEV is not set
-+CONFIG_CAN_FLEXCAN=y
-+# CONFIG_CAN_DEBUG_DEVICES is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+# CONFIG_PHONET is not set
-+CONFIG_WIRELESS=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_OLD_REGULATORY=y
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_LIB80211 is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_WIMAX is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+# CONFIG_KLIPS is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+CONFIG_FIRMWARE_IN_KERNEL=y
-+CONFIG_EXTRA_FIRMWARE=""
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_TESTS is not set
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+CONFIG_MTD_CFI_STAA=y
-+CONFIG_MTD_CFI_UTIL=y
-+CONFIG_MTD_RAM=y
-+CONFIG_MTD_ROM=y
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_COMPAT=y
-+CONFIG_MTD_PHYSMAP_START=0xff800000
-+CONFIG_MTD_PHYSMAP_LEN=0x400000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_INTEL_VR_NOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# LPDDR flash memory drivers
-+#
-+# CONFIG_MTD_LPDDR is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_BLK_DEV_HD is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_PHANTOM is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+# CONFIG_ICS932S401 is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HP_ILO is not set
-+# CONFIG_C2PORT is not set
-+
-+#
-+# EEPROM support
-+#
-+# CONFIG_EEPROM_AT24 is not set
-+# CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_HAVE_IDE=y
-+CONFIG_IDE=y
-+
-+#
-+# Please see Documentation/ide/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+CONFIG_IDE_GD=y
-+CONFIG_IDE_GD_ATA=y
-+# CONFIG_IDE_GD_ATAPI is not set
-+# CONFIG_BLK_DEV_IDECD is not set
-+# CONFIG_BLK_DEV_IDETAPE is not set
-+# CONFIG_IDE_TASK_IOCTL is not set
-+CONFIG_IDE_PROC_FS=y
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+# CONFIG_BLK_DEV_PLATFORM is not set
-+
-+#
-+# PCI IDE chipsets support
-+#
-+# CONFIG_BLK_DEV_GENERIC is not set
-+# CONFIG_BLK_DEV_OPTI621 is not set
-+# CONFIG_BLK_DEV_AEC62XX is not set
-+# CONFIG_BLK_DEV_ALI15X3 is not set
-+# CONFIG_BLK_DEV_AMD74XX is not set
-+# CONFIG_BLK_DEV_CMD64X is not set
-+# CONFIG_BLK_DEV_TRIFLEX is not set
-+# CONFIG_BLK_DEV_CS5520 is not set
-+# CONFIG_BLK_DEV_CS5530 is not set
-+# CONFIG_BLK_DEV_HPT366 is not set
-+# CONFIG_BLK_DEV_JMICRON is not set
-+# CONFIG_BLK_DEV_SC1200 is not set
-+# CONFIG_BLK_DEV_PIIX is not set
-+# CONFIG_BLK_DEV_IT8172 is not set
-+# CONFIG_BLK_DEV_IT8213 is not set
-+# CONFIG_BLK_DEV_IT821X is not set
-+# CONFIG_BLK_DEV_NS87415 is not set
-+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-+# CONFIG_BLK_DEV_SVWKS is not set
-+# CONFIG_BLK_DEV_SIIMAGE is not set
-+# CONFIG_BLK_DEV_SLC90E66 is not set
-+# CONFIG_BLK_DEV_TRM290 is not set
-+# CONFIG_BLK_DEV_VIA82CXXX is not set
-+# CONFIG_BLK_DEV_TC86C001 is not set
-+# CONFIG_BLK_DEV_IDEDMA is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_SCSI_DH is not set
-+CONFIG_ATA=y
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_SATA_PMP=y
-+# CONFIG_SATA_AHCI is not set
-+CONFIG_SATA_SIL24=y
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_SVW is not set
-+# CONFIG_ATA_PIIX is not set
-+# CONFIG_SATA_MV is not set
-+# CONFIG_SATA_NV is not set
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_PROMISE is not set
-+# CONFIG_SATA_SX4 is not set
-+CONFIG_SATA_SIL=y
-+# CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_ULI is not set
-+# CONFIG_SATA_VIA is not set
-+# CONFIG_SATA_VITESSE is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_PATA_ALI is not set
-+# CONFIG_PATA_AMD is not set
-+# CONFIG_PATA_ARTOP is not set
-+# CONFIG_PATA_ATIIXP is not set
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_CMD64X is not set
-+# CONFIG_PATA_CS5520 is not set
-+# CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CYPRESS is not set
-+# CONFIG_PATA_EFAR is not set
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_HPT366 is not set
-+# CONFIG_PATA_HPT37X is not set
-+# CONFIG_PATA_HPT3X2N is not set
-+# CONFIG_PATA_HPT3X3 is not set
-+# CONFIG_PATA_IT821X is not set
-+# CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_JMICRON is not set
-+# CONFIG_PATA_TRIFLEX is not set
-+# CONFIG_PATA_MARVELL is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_OLDPIIX is not set
-+# CONFIG_PATA_NETCELL is not set
-+# CONFIG_PATA_NINJA32 is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_NS87415 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC_OLD is not set
-+# CONFIG_PATA_RADISYS is not set
-+# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SERVERWORKS is not set
-+# CONFIG_PATA_PDC2027X is not set
-+# CONFIG_PATA_SIL680 is not set
-+# CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_VIA is not set
-+# CONFIG_PATA_WINBOND is not set
-+# CONFIG_PATA_SCH is not set
-+# CONFIG_MD is not set
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# Enable only one of the two stacks, unless you know what you are doing
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+# CONFIG_I2O is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_ARCNET is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+CONFIG_BROADCOM5222_PHY=y
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_NATIONAL_PHY is not set
-+# CONFIG_NATIONAL8364x_PHY is not set
-+# CONFIG_NATIONAL8384x_PHY is not set
-+# CONFIG_MicrelKSZ8041_PHY is not set
-+# CONFIG_STE10XP is not set
-+# CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_DNET is not set
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-+CONFIG_NET_PCI=y
-+# CONFIG_PCNET32 is not set
-+# CONFIG_AMD8111_ETH is not set
-+# CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_B44 is not set
-+# CONFIG_FORCEDETH is not set
-+CONFIG_E100=y
-+# CONFIG_FEALNX is not set
-+# CONFIG_NATSEMI is not set
-+CONFIG_NE2K_PCI=y
-+# CONFIG_8139CP is not set
-+CONFIG_8139TOO=y
-+CONFIG_8139TOO_PIO=y
-+# CONFIG_8139TOO_TUNE_TWISTER is not set
-+# CONFIG_8139TOO_8129 is not set
-+# CONFIG_8139_OLD_RX_RESET is not set
-+# CONFIG_R6040 is not set
-+# CONFIG_SIS900 is not set
-+# CONFIG_EPIC100 is not set
-+# CONFIG_SMSC9420 is not set
-+# CONFIG_SUNDANCE is not set
-+# CONFIG_TLAN is not set
-+# CONFIG_VIA_RHINE is not set
-+# CONFIG_SC92031 is not set
-+CONFIG_FEC_548x=y
-+CONFIG_FEC_548x_ENABLE_FEC2=y
-+CONFIG_FEC_548x_SHARED_PHY=y
-+# CONFIG_ATL2 is not set
-+CONFIG_NETDEV_1000=y
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+CONFIG_E1000=y
-+# CONFIG_E1000E is not set
-+# CONFIG_IP1000 is not set
-+# CONFIG_IGB is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_VIA_VELOCITY is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+# CONFIG_ATL1E is not set
-+# CONFIG_ATL1C is not set
-+# CONFIG_JME is not set
-+# CONFIG_NETDEV_10000 is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_PCIPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_NOZOMI is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+# CONFIG_SERIAL_COLDFIRE_EDMA is not set
-+CONFIG_SERIAL_MCF=y
-+CONFIG_SERIAL_MCF_BAUDRATE=115200
-+CONFIG_SERIAL_MCF_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+# CONFIG_I2C_CHARDEV is not set
-+CONFIG_I2C_HELPER_AUTO=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# PC SMBus host controller drivers
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_ISCH is not set
-+# CONFIG_I2C_PIIX4 is not set
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_MCF=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+
-+#
-+# Graphics adapter I2C/DDC channel drivers
-+#
-+# CONFIG_I2C_VOODOO3 is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+# CONFIG_SPI is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+# CONFIG_WATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+# CONFIG_MFD_PCF50633 is not set
-+# CONFIG_REGULATOR is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+CONFIG_DAB=y
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_SOUND is not set
-+# CONFIG_HID_SUPPORT is not set
-+# CONFIG_USB_SUPPORT is not set
-+# CONFIG_UWB is not set
-+# CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_ACCESSIBILITY is not set
-+# CONFIG_INFINIBAND is not set
-+# CONFIG_RTC_CLASS is not set
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_UIO is not set
-+# CONFIG_STAGING is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_BTRFS_FS is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+CONFIG_MISC_FILESYSTEMS=y
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_SQUASHFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+CONFIG_ROMFS_FS=y
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_REGISTER_V4 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_MEMORY_INIT=y
-+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-+
-+#
-+# Tracers
-+#
-+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_SAMPLES is not set
-+# CONFIG_BOOTPARAM is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+# CONFIG_CRYPTO_FIPS is not set
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_AEAD2=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_BLKCIPHER2=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+CONFIG_CRYPTO_TEST=m
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+
-+#
-+# OCF Configuration
-+#
-+# CONFIG_OCF_OCF is not set
-+
-+#
-+# Talitos Driver
-+#
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_GENERIC_FIND_LAST_BIT=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/configs/m5475evb_defconfig
-@@ -0,0 +1,1324 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.29
-+# Tue Aug 24 15:41:10 2010
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+# CONFIG_TIME_LOW_RES is not set
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+
-+#
-+# RCU Subsystem
-+#
-+CONFIG_CLASSIC_RCU=y
-+# CONFIG_TREE_RCU is not set
-+# CONFIG_PREEMPT_RCU is not set
-+# CONFIG_TREE_RCU_TRACE is not set
-+# CONFIG_PREEMPT_RCU_TRACE is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+# CONFIG_CGROUPS is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_NET_NS is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_ANON_INODES=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_PCI_QUIRKS=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_FREEZER is not set
-+
-+#
-+# Platform dependent setup
-+#
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+# CONFIG_FPU is not set
-+CONFIG_MCD_DMA=y
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+CONFIG_PCI=y
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+# CONFIG_SUN3 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+# CONFIG_M5445X is not set
-+# CONFIG_HAVE_FSL_USB_DR is not set
-+CONFIG_M547X_8X=y
-+CONFIG_M547X=y
-+# CONFIG_M548X is not set
-+# CONFIG_M5474LITE is not set
-+# CONFIG_M5475AFE is not set
-+# CONFIG_M5475BFE is not set
-+CONFIG_M5475CFE=y
-+# CONFIG_M5475DFE is not set
-+# CONFIG_M5475EFE is not set
-+# CONFIG_M5475FFE is not set
-+# CONFIG_M5484LITE is not set
-+# CONFIG_M5485AFE is not set
-+# CONFIG_M5485BFE is not set
-+# CONFIG_M5485CFE is not set
-+# CONFIG_M5485DFE is not set
-+# CONFIG_M5485EFE is not set
-+# CONFIG_M5485FFE is not set
-+# CONFIG_M5441X is not set
-+CONFIG_MCFCLK=266000000
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x00000000
-+CONFIG_SDRAM_SIZE=0x04000000
-+CONFIG_NOR_FLASH_BASE=0xE0000000
-+CONFIG_DMA_BASE=0xef000000
-+CONFIG_DMA_SIZE=0x800000
-+CONFIG_VDSO=y
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_UNEVICTABLE_LRU=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+CONFIG_PCI_LEGACY=y
-+# CONFIG_PCI_STUB is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_COMPAT_NET_DEV_OPS=y
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+# CONFIG_DCB is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+CONFIG_CAN=y
-+CONFIG_CAN_RAW=y
-+# CONFIG_CAN_BCM is not set
-+
-+#
-+# CAN Device Drivers
-+#
-+# CONFIG_CAN_VCAN is not set
-+# CONFIG_CAN_DEV is not set
-+# CONFIG_CAN_FLEXCAN is not set
-+# CONFIG_CAN_DEBUG_DEVICES is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+# CONFIG_PHONET is not set
-+CONFIG_WIRELESS=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_OLD_REGULATORY=y
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_LIB80211 is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_WIMAX is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+# CONFIG_KLIPS is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+CONFIG_FIRMWARE_IN_KERNEL=y
-+CONFIG_EXTRA_FIRMWARE=""
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_TESTS is not set
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+# CONFIG_MTD_CHAR is not set
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_JEDECPROBE=y
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+CONFIG_MTD_RAM=y
-+CONFIG_MTD_ROM=y
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_COMPAT=y
-+CONFIG_MTD_PHYSMAP_START=0xe0000000
-+CONFIG_MTD_PHYSMAP_LEN=0x1000000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_INTEL_VR_NOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# LPDDR flash memory drivers
-+#
-+# CONFIG_MTD_LPDDR is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_BLK_DEV_HD is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_PHANTOM is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+# CONFIG_ICS932S401 is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HP_ILO is not set
-+# CONFIG_C2PORT is not set
-+
-+#
-+# EEPROM support
-+#
-+# CONFIG_EEPROM_AT24 is not set
-+# CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_SCSI_DH is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# Enable only one of the two stacks, unless you know what you are doing
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+# CONFIG_I2O is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_ARCNET is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+CONFIG_BROADCOM5222_PHY=y
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_NATIONAL_PHY is not set
-+# CONFIG_NATIONAL8364x_PHY is not set
-+# CONFIG_NATIONAL8384x_PHY is not set
-+# CONFIG_MicrelKSZ8041_PHY is not set
-+# CONFIG_STE10XP is not set
-+# CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_DNET is not set
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-+# CONFIG_NET_PCI is not set
-+# CONFIG_B44 is not set
-+CONFIG_FEC_548x=y
-+CONFIG_FEC_548x_ENABLE_FEC2=y
-+CONFIG_FEC_548x_SHARED_PHY=y
-+# CONFIG_ATL2 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
-+#
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_PCIPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_NOZOMI is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+# CONFIG_SERIAL_COLDFIRE_EDMA is not set
-+CONFIG_SERIAL_MCF=y
-+CONFIG_SERIAL_MCF_BAUDRATE=115200
-+CONFIG_SERIAL_MCF_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_HELPER_AUTO=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# PC SMBus host controller drivers
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_ISCH is not set
-+# CONFIG_I2C_PIIX4 is not set
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_MCF=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Graphics adapter I2C/DDC channel drivers
-+#
-+# CONFIG_I2C_VOODOO3 is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+# CONFIG_SPI is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+# CONFIG_ALIM7101_WDT is not set
-+CONFIG_COLDFIRE_WATCHDOG=y
-+
-+#
-+# PCI-based Watchdog Cards
-+#
-+# CONFIG_PCIPCWATCHDOG is not set
-+# CONFIG_WDTPCI is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+# CONFIG_MFD_PCF50633 is not set
-+# CONFIG_REGULATOR is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_SOUND is not set
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+# CONFIG_USB_DEVICEFS is not set
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_SUSPEND is not set
-+# CONFIG_USB_OTG is not set
-+CONFIG_USB_MON=y
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=y
-+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+# CONFIG_USB_OXU210HP_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_OHCI_HCD is not set
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_WHCI_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+#
-+
-+#
-+# see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_VST is not set
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+# CONFIG_UWB is not set
-+# CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_ACCESSIBILITY is not set
-+# CONFIG_INFINIBAND is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+CONFIG_RTC_DRV_RS5C372=y
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+# CONFIG_RTC_DRV_RX8581 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1286 is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T35 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_RTC_MCF is not set
-+# CONFIG_RTC_M5441X is not set
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_UIO is not set
-+# CONFIG_STAGING is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_BTRFS_FS is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+CONFIG_MISC_FILESYSTEMS=y
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_SQUASHFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+CONFIG_ROMFS_FS=y
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_REGISTER_V4 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_MEMORY_INIT=y
-+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-+
-+#
-+# Tracers
-+#
-+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_SAMPLES is not set
-+# CONFIG_BOOTPARAM is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+# CONFIG_CRYPTO_FIPS is not set
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_AEAD2=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_BLKCIPHER2=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+CONFIG_CRYPTO_TEST=m
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+
-+#
-+# OCF Configuration
-+#
-+# CONFIG_OCF_OCF is not set
-+
-+#
-+# Talitos Driver
-+#
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_GENERIC_FIND_LAST_BIT=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/configs/m5485evb_defconfig
-@@ -0,0 +1,1582 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.29
-+# Tue Aug 24 16:19:05 2010
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+# CONFIG_TIME_LOW_RES is not set
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+
-+#
-+# RCU Subsystem
-+#
-+CONFIG_CLASSIC_RCU=y
-+# CONFIG_TREE_RCU is not set
-+# CONFIG_PREEMPT_RCU is not set
-+# CONFIG_TREE_RCU_TRACE is not set
-+# CONFIG_PREEMPT_RCU_TRACE is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+# CONFIG_CGROUPS is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_NET_NS is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_ANON_INODES=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_PCI_QUIRKS=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_FREEZER is not set
-+
-+#
-+# Platform dependent setup
-+#
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+# CONFIG_FPU is not set
-+CONFIG_MCD_DMA=y
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+CONFIG_PCI=y
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+# CONFIG_SUN3 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+# CONFIG_M5445X is not set
-+# CONFIG_HAVE_FSL_USB_DR is not set
-+CONFIG_M547X_8X=y
-+# CONFIG_M547X is not set
-+CONFIG_M548X=y
-+# CONFIG_M5474LITE is not set
-+# CONFIG_M5475AFE is not set
-+# CONFIG_M5475BFE is not set
-+# CONFIG_M5475CFE is not set
-+# CONFIG_M5475DFE is not set
-+# CONFIG_M5475EFE is not set
-+# CONFIG_M5475FFE is not set
-+# CONFIG_M5484LITE is not set
-+# CONFIG_M5485AFE is not set
-+# CONFIG_M5485BFE is not set
-+CONFIG_M5485CFE=y
-+# CONFIG_M5485DFE is not set
-+# CONFIG_M5485EFE is not set
-+# CONFIG_M5485FFE is not set
-+# CONFIG_M5441X is not set
-+CONFIG_MCFCLK=200000000
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x00000000
-+CONFIG_SDRAM_SIZE=0x04000000
-+CONFIG_NOR_FLASH_BASE=0xE0000000
-+CONFIG_DMA_BASE=0xef000000
-+CONFIG_DMA_SIZE=0x800000
-+CONFIG_VDSO=y
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_UNEVICTABLE_LRU=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+CONFIG_PCI_LEGACY=y
-+# CONFIG_PCI_STUB is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_COMPAT_NET_DEV_OPS=y
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+# CONFIG_DCB is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+CONFIG_CAN=y
-+CONFIG_CAN_RAW=y
-+# CONFIG_CAN_BCM is not set
-+
-+#
-+# CAN Device Drivers
-+#
-+# CONFIG_CAN_VCAN is not set
-+CONFIG_CAN_DEV=y
-+CONFIG_CAN_CALC_BITTIMING=y
-+CONFIG_CAN_FLEXCAN=y
-+CONFIG_CAN_MCF=y
-+# CONFIG_CAN_DEBUG_DEVICES is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+# CONFIG_PHONET is not set
-+CONFIG_WIRELESS=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_OLD_REGULATORY=y
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_LIB80211 is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_WIMAX is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+# CONFIG_KLIPS is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+CONFIG_FIRMWARE_IN_KERNEL=y
-+CONFIG_EXTRA_FIRMWARE=""
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_TESTS is not set
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+CONFIG_MTD_RAM=y
-+CONFIG_MTD_ROM=y
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_COMPAT=y
-+CONFIG_MTD_PHYSMAP_START=0xE0000000
-+CONFIG_MTD_PHYSMAP_LEN=0x1000000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_INTEL_VR_NOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# LPDDR flash memory drivers
-+#
-+# CONFIG_MTD_LPDDR is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_BLK_DEV_HD is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_PHANTOM is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+# CONFIG_ICS932S401 is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HP_ILO is not set
-+# CONFIG_C2PORT is not set
-+
-+#
-+# EEPROM support
-+#
-+# CONFIG_EEPROM_AT24 is not set
-+# CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_HAVE_IDE=y
-+CONFIG_IDE=y
-+
-+#
-+# Please see Documentation/ide/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+CONFIG_IDE_GD=y
-+CONFIG_IDE_GD_ATA=y
-+# CONFIG_IDE_GD_ATAPI is not set
-+# CONFIG_BLK_DEV_IDECD is not set
-+# CONFIG_BLK_DEV_IDETAPE is not set
-+# CONFIG_IDE_TASK_IOCTL is not set
-+CONFIG_IDE_PROC_FS=y
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+# CONFIG_BLK_DEV_PLATFORM is not set
-+
-+#
-+# PCI IDE chipsets support
-+#
-+# CONFIG_BLK_DEV_GENERIC is not set
-+# CONFIG_BLK_DEV_OPTI621 is not set
-+# CONFIG_BLK_DEV_AEC62XX is not set
-+# CONFIG_BLK_DEV_ALI15X3 is not set
-+# CONFIG_BLK_DEV_AMD74XX is not set
-+# CONFIG_BLK_DEV_CMD64X is not set
-+# CONFIG_BLK_DEV_TRIFLEX is not set
-+# CONFIG_BLK_DEV_CS5520 is not set
-+# CONFIG_BLK_DEV_CS5530 is not set
-+# CONFIG_BLK_DEV_HPT366 is not set
-+# CONFIG_BLK_DEV_JMICRON is not set
-+# CONFIG_BLK_DEV_SC1200 is not set
-+# CONFIG_BLK_DEV_PIIX is not set
-+# CONFIG_BLK_DEV_IT8172 is not set
-+# CONFIG_BLK_DEV_IT8213 is not set
-+# CONFIG_BLK_DEV_IT821X is not set
-+# CONFIG_BLK_DEV_NS87415 is not set
-+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-+# CONFIG_BLK_DEV_SVWKS is not set
-+# CONFIG_BLK_DEV_SIIMAGE is not set
-+# CONFIG_BLK_DEV_SLC90E66 is not set
-+# CONFIG_BLK_DEV_TRM290 is not set
-+# CONFIG_BLK_DEV_VIA82CXXX is not set
-+# CONFIG_BLK_DEV_TC86C001 is not set
-+# CONFIG_BLK_DEV_IDEDMA is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_SCSI_DH is not set
-+CONFIG_ATA=y
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_SATA_PMP=y
-+# CONFIG_SATA_AHCI is not set
-+CONFIG_SATA_SIL24=y
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_SVW is not set
-+# CONFIG_ATA_PIIX is not set
-+# CONFIG_SATA_MV is not set
-+# CONFIG_SATA_NV is not set
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_PROMISE is not set
-+# CONFIG_SATA_SX4 is not set
-+CONFIG_SATA_SIL=y
-+# CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_ULI is not set
-+# CONFIG_SATA_VIA is not set
-+# CONFIG_SATA_VITESSE is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_PATA_ALI is not set
-+# CONFIG_PATA_AMD is not set
-+# CONFIG_PATA_ARTOP is not set
-+# CONFIG_PATA_ATIIXP is not set
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_CMD64X is not set
-+# CONFIG_PATA_CS5520 is not set
-+# CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CYPRESS is not set
-+# CONFIG_PATA_EFAR is not set
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_HPT366 is not set
-+# CONFIG_PATA_HPT37X is not set
-+# CONFIG_PATA_HPT3X2N is not set
-+# CONFIG_PATA_HPT3X3 is not set
-+# CONFIG_PATA_IT821X is not set
-+# CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_JMICRON is not set
-+# CONFIG_PATA_TRIFLEX is not set
-+# CONFIG_PATA_MARVELL is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_OLDPIIX is not set
-+# CONFIG_PATA_NETCELL is not set
-+# CONFIG_PATA_NINJA32 is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_NS87415 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC_OLD is not set
-+# CONFIG_PATA_RADISYS is not set
-+# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SERVERWORKS is not set
-+# CONFIG_PATA_PDC2027X is not set
-+# CONFIG_PATA_SIL680 is not set
-+# CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_VIA is not set
-+# CONFIG_PATA_WINBOND is not set
-+# CONFIG_PATA_SCH is not set
-+# CONFIG_MD is not set
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# Enable only one of the two stacks, unless you know what you are doing
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+# CONFIG_I2O is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_ARCNET is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+CONFIG_BROADCOM5222_PHY=y
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_NATIONAL_PHY is not set
-+# CONFIG_NATIONAL8364x_PHY is not set
-+# CONFIG_NATIONAL8384x_PHY is not set
-+# CONFIG_MicrelKSZ8041_PHY is not set
-+# CONFIG_STE10XP is not set
-+# CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_DNET is not set
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-+CONFIG_NET_PCI=y
-+# CONFIG_PCNET32 is not set
-+# CONFIG_AMD8111_ETH is not set
-+# CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_B44 is not set
-+# CONFIG_FORCEDETH is not set
-+CONFIG_E100=y
-+# CONFIG_FEALNX is not set
-+# CONFIG_NATSEMI is not set
-+CONFIG_NE2K_PCI=y
-+CONFIG_8139CP=y
-+CONFIG_8139TOO=y
-+CONFIG_8139TOO_PIO=y
-+# CONFIG_8139TOO_TUNE_TWISTER is not set
-+# CONFIG_8139TOO_8129 is not set
-+# CONFIG_8139_OLD_RX_RESET is not set
-+# CONFIG_R6040 is not set
-+# CONFIG_SIS900 is not set
-+# CONFIG_EPIC100 is not set
-+# CONFIG_SMSC9420 is not set
-+# CONFIG_SUNDANCE is not set
-+# CONFIG_TLAN is not set
-+# CONFIG_VIA_RHINE is not set
-+# CONFIG_SC92031 is not set
-+CONFIG_FEC_548x=y
-+CONFIG_FEC_548x_ENABLE_FEC2=y
-+CONFIG_FEC_548x_SHARED_PHY=y
-+# CONFIG_ATL2 is not set
-+CONFIG_NETDEV_1000=y
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+CONFIG_E1000=y
-+# CONFIG_E1000E is not set
-+# CONFIG_IP1000 is not set
-+# CONFIG_IGB is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+CONFIG_R8169=y
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_VIA_VELOCITY is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+# CONFIG_ATL1E is not set
-+# CONFIG_ATL1C is not set
-+# CONFIG_JME is not set
-+# CONFIG_NETDEV_10000 is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
-+#
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_PCIPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_NOZOMI is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+# CONFIG_SERIAL_COLDFIRE_EDMA is not set
-+CONFIG_SERIAL_MCF=y
-+CONFIG_SERIAL_MCF_BAUDRATE=115200
-+CONFIG_SERIAL_MCF_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_HELPER_AUTO=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# PC SMBus host controller drivers
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_ISCH is not set
-+# CONFIG_I2C_PIIX4 is not set
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_MCF=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Graphics adapter I2C/DDC channel drivers
-+#
-+# CONFIG_I2C_VOODOO3 is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+# CONFIG_SPI is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+# CONFIG_ALIM7101_WDT is not set
-+CONFIG_COLDFIRE_WATCHDOG=y
-+
-+#
-+# PCI-based Watchdog Cards
-+#
-+# CONFIG_PCIPCWATCHDOG is not set
-+# CONFIG_WDTPCI is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+# CONFIG_MFD_PCF50633 is not set
-+# CONFIG_REGULATOR is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+CONFIG_FB_SMI=y
-+# CONFIG_FB_CIRRUS is not set
-+# CONFIG_FB_PM2 is not set
-+# CONFIG_FB_CYBER2000 is not set
-+# CONFIG_FB_ASILIANT is not set
-+# CONFIG_FB_IMSTT is not set
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_NVIDIA is not set
-+# CONFIG_FB_RIVA is not set
-+# CONFIG_FB_MATROX is not set
-+# CONFIG_FB_RADEON is not set
-+# CONFIG_FB_ATY128 is not set
-+# CONFIG_FB_ATY is not set
-+# CONFIG_FB_S3 is not set
-+# CONFIG_FB_SAVAGE is not set
-+# CONFIG_FB_SIS is not set
-+# CONFIG_FB_VIA is not set
-+# CONFIG_FB_NEOMAGIC is not set
-+# CONFIG_FB_KYRO is not set
-+# CONFIG_FB_3DFX is not set
-+# CONFIG_FB_VOODOO1 is not set
-+# CONFIG_FB_VT8623 is not set
-+# CONFIG_FB_TRIDENT is not set
-+# CONFIG_FB_ARK is not set
-+# CONFIG_FB_PM3 is not set
-+# CONFIG_FB_CARMINE is not set
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_FB_METRONOME is not set
-+# CONFIG_FB_MB862XX is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-+CONFIG_FONTS=y
-+CONFIG_FONT_8x8=y
-+CONFIG_FONT_8x16=y
-+CONFIG_FONT_6x11=y
-+# CONFIG_FONT_7x14 is not set
-+CONFIG_FONT_PEARL_8x8=y
-+CONFIG_FONT_ACORN_8x8=y
-+CONFIG_FONT_MINI_4x6=y
-+CONFIG_FONT_SUN8x16=y
-+CONFIG_FONT_SUN12x22=y
-+CONFIG_FONT_10x18=y
-+CONFIG_LOGO=y
-+CONFIG_LOGO_LINUX_MONO=y
-+CONFIG_LOGO_LINUX_VGA16=y
-+CONFIG_LOGO_LINUX_CLUT224=y
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+CONFIG_HID_DEBUG=y
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_HID_PID is not set
-+# CONFIG_USB_HIDDEV is not set
-+
-+#
-+# Special HID drivers
-+#
-+CONFIG_HID_COMPAT=y
-+CONFIG_HID_A4TECH=y
-+CONFIG_HID_APPLE=y
-+CONFIG_HID_BELKIN=y
-+CONFIG_HID_CHERRY=y
-+CONFIG_HID_CHICONY=y
-+CONFIG_HID_CYPRESS=y
-+CONFIG_HID_EZKEY=y
-+CONFIG_HID_GYRATION=y
-+CONFIG_HID_LOGITECH=y
-+# CONFIG_LOGITECH_FF is not set
-+# CONFIG_LOGIRUMBLEPAD2_FF is not set
-+CONFIG_HID_MICROSOFT=y
-+CONFIG_HID_MONTEREY=y
-+CONFIG_HID_NTRIG=y
-+CONFIG_HID_PANTHERLORD=y
-+# CONFIG_PANTHERLORD_FF is not set
-+CONFIG_HID_PETALYNX=y
-+CONFIG_HID_SAMSUNG=y
-+CONFIG_HID_SONY=y
-+CONFIG_HID_SUNPLUS=y
-+# CONFIG_GREENASIA_FF is not set
-+CONFIG_HID_TOPSEED=y
-+# CONFIG_THRUSTMASTER_FF is not set
-+# CONFIG_ZEROPLUS_FF is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_SUSPEND is not set
-+# CONFIG_USB_OTG is not set
-+CONFIG_USB_MON=y
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+# CONFIG_USB_OXU210HP_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_OHCI_HCD is not set
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_WHCI_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+#
-+
-+#
-+# see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_VST is not set
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+# CONFIG_UWB is not set
-+# CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_ACCESSIBILITY is not set
-+# CONFIG_INFINIBAND is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+CONFIG_RTC_DRV_RS5C372=y
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+# CONFIG_RTC_DRV_RX8581 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1286 is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T35 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_RTC_MCF is not set
-+# CONFIG_RTC_M5441X is not set
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_UIO is not set
-+# CONFIG_STAGING is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_BTRFS_FS is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+CONFIG_MISC_FILESYSTEMS=y
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_SQUASHFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+CONFIG_ROMFS_FS=y
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_REGISTER_V4 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_MEMORY_INIT=y
-+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-+
-+#
-+# Tracers
-+#
-+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_SAMPLES is not set
-+# CONFIG_BOOTPARAM is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+# CONFIG_CRYPTO_FIPS is not set
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_AEAD2=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_BLKCIPHER2=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+CONFIG_CRYPTO_TEST=m
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+
-+#
-+# OCF Configuration
-+#
-+# CONFIG_OCF_OCF is not set
-+
-+#
-+# Talitos Driver
-+#
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_GENERIC_FIND_LAST_BIT=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_548x_cacheflush.h
-@@ -0,0 +1,262 @@
-+/*
-+ * arch/m68k/include/asm/cf_548x_cacheflush.h - Coldfire 547x/548x Cache
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan kmahan@freescale.com
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * Based on include/asm-m68k/cacheflush.h
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef M68K_CF_548x_CACHEFLUSH_H
-+#define M68K_CF_548x_CACHEFLUSH_H
-+
-+#include <asm/cfcache.h>
-+/*
-+ * Cache handling functions
-+ */
-+
-+#define flush_icache() \
-+({ \
-+ unsigned long set; \
-+ unsigned long start_set; \
-+ unsigned long end_set; \
-+ \
-+ start_set = 0; \
-+ end_set = (unsigned long)LAST_DCACHE_ADDR; \
-+ \
-+ for (set = start_set; set <= end_set; set += (0x10 - 3)) {\
-+ asm volatile("cpushl %%ic,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%ic,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%ic,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set)); \
-+ } \
-+})
-+
-+#define flush_dcache() \
-+({ \
-+ unsigned long set; \
-+ unsigned long start_set; \
-+ unsigned long end_set; \
-+ \
-+ start_set = 0; \
-+ end_set = (unsigned long)LAST_DCACHE_ADDR; \
-+ \
-+ for (set = start_set; set <= end_set; set += (0x10 - 3)) { \
-+ asm volatile("cpushl %%dc,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%dc,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%dc,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set)); \
-+ } \
-+})
-+
-+#define flush_bcache() \
-+({ \
-+ unsigned long set; \
-+ unsigned long start_set; \
-+ unsigned long end_set; \
-+ \
-+ start_set = 0; \
-+ end_set = (unsigned long)LAST_DCACHE_ADDR; \
-+ \
-+ for (set = start_set; set <= end_set; set += (0x10 - 3)) { \
-+ asm volatile("cpushl %%bc,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%bc,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%bc,(%0)\n" \
-+ "\taddq%.l #1,%0\n" \
-+ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set)); \
-+ } \
-+})
-+
-+/*
-+ * invalidate the cache for the specified memory range.
-+ * It starts at the physical address specified for
-+ * the given number of bytes.
-+ */
-+extern void cache_clear(unsigned long paddr, int len);
-+/*
-+ * push any dirty cache in the specified memory range.
-+ * It starts at the physical address specified for
-+ * the given number of bytes.
-+ */
-+extern void cache_push(unsigned long paddr, int len);
-+
-+/*
-+ * push and invalidate pages in the specified user virtual
-+ * memory range.
-+ */
-+extern void cache_push_v(unsigned long vaddr, int len);
-+
-+/* This is needed whenever the virtual mapping of the current
-+ process changes. */
-+
-+/**
-+ * flush_cache_mm - Flush an mm_struct
-+ * @mm: mm_struct to flush
-+ */
-+static inline void flush_cache_mm(struct mm_struct *mm)
-+{
-+ if (mm == current->mm)
-+ flush_bcache();
-+}
-+
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-+
-+#define flush_cache_all() flush_bcache()
-+
-+/**
-+ * flush_cache_range - Flush a cache range
-+ * @vma: vma struct
-+ * @start: Starting address
-+ * @end: Ending address
-+ *
-+ * flush_cache_range must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_range(struct vm_area_struct *vma,
-+ unsigned long start, unsigned long end)
-+{
-+ if (vma->vm_mm == current->mm)
-+ flush_bcache();
-+/*cf_cache_flush_range(start, end);*/
-+}
-+
-+/**
-+ * flush_cache_page - Flush a page of the cache
-+ * @vma: vma struct
-+ * @vmaddr:
-+ * @pfn: page numer
-+ *
-+ * flush_cache_page must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_page(struct vm_area_struct *vma,
-+ unsigned long vmaddr, unsigned long pfn)
-+{
-+ if (vma->vm_mm == current->mm)
-+ flush_bcache();
-+/*cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);*/
-+}
-+
-+/* Push the page at kernel virtual address and clear the icache */
-+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
-+#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page))
-+extern inline void __flush_page_to_ram(void *address)
-+{
-+ unsigned long set;
-+ unsigned long start_set;
-+ unsigned long end_set;
-+ unsigned long addr = (unsigned long) address;
-+
-+ addr &= ~(PAGE_SIZE - 1);
-+ /* round down to page start address */
-+
-+ start_set = addr & _ICACHE_SET_MASK;
-+ end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK;
-+
-+ if (start_set > end_set) {
-+ /* from the begining to the lowest address */
-+ for (set = 0; set <= end_set; set += (0x10 - 3)) {
-+ asm volatile("cpushl %%bc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%bc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%bc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
-+ }
-+ /* next loop will finish the cache ie pass the hole */
-+ end_set = LAST_ICACHE_ADDR;
-+ }
-+
-+ for (set = start_set; set <= end_set; set += (0x10 - 3)) {
-+ asm volatile("cpushl %%bc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%bc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%bc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
-+ }
-+}
-+
-+/* Use __flush_page_to_ram() for flush_dcache_page all values are same - MW */
-+#define flush_dcache_page(page) \
-+ __flush_page_to_ram((void *) page_address(page))
-+#define flush_icache_page(vma, pg) \
-+ __flush_page_to_ram((void *) page_address(pg))
-+#define flush_icache_user_range(adr, len) \
-+ do { } while (0)
-+/* NL */
-+#define flush_icache_user_page(vma, page, addr, len) \
-+ do { } while (0)
-+
-+/* Push n pages at kernel virtual address and clear the icache */
-+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
-+extern inline void flush_icache_range(unsigned long address,
-+ unsigned long endaddr)
-+{
-+ unsigned long set;
-+ unsigned long start_set;
-+ unsigned long end_set;
-+
-+ start_set = address & _ICACHE_SET_MASK;
-+ end_set = endaddr & _ICACHE_SET_MASK;
-+
-+ if (start_set > end_set) {
-+ /* from the begining to the lowest address */
-+ for (set = 0; set <= end_set; set += (0x10 - 3)) {
-+ asm volatile("cpushl %%ic,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%ic,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%ic,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
-+ }
-+ /* next loop will finish the cache ie pass the hole */
-+ end_set = LAST_ICACHE_ADDR;
-+ }
-+ for (set = start_set; set <= end_set; set += (0x10 - 3)) {
-+ asm volatile("cpushl %%ic,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%ic,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%ic,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
-+ }
-+}
-+
-+static inline void copy_to_user_page(struct vm_area_struct *vma,
-+ struct page *page, unsigned long vaddr,
-+ void *dst, void *src, int len)
-+{
-+ memcpy(dst, src, len);
-+ flush_icache_user_page(vma, page, vaddr, len);
-+}
-+static inline void copy_from_user_page(struct vm_area_struct *vma,
-+ struct page *page, unsigned long vaddr,
-+ void *dst, void *src, int len)
-+{
-+ memcpy(dst, src, len);
-+}
-+
-+#define flush_cache_vmap(start, end) flush_cache_all()
-+#define flush_cache_vunmap(start, end) flush_cache_all()
-+#define flush_dcache_mmap_lock(mapping) do { } while (0)
-+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-+
-+#endif /* M68K_CF_548x_CACHEFLUSH_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485dma.h
-@@ -0,0 +1,98 @@
-+/*
-+ * m5485dma.h -- ColdFire 547x/548x DMA controller support.
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+#ifndef __MCF548X_DMA_H__
-+#define __MCF548X_DMA_H__
-+
-+
-+/* Register read/write macros */
-+#define MCF_DMA_DIPR MCF_REG32(0x008014)
-+#define MCF_DMA_DIMR MCF_REG32(0x008018)
-+#define MCF_DMA_IMCR MCF_REG32(0x00805C)
-+
-+/* Bit definitions and macros for MCF_DMA_DIPR */
-+#define MCF_DMA_DIPR_TASK0 (0x00000001)
-+#define MCF_DMA_DIPR_TASK1 (0x00000002)
-+#define MCF_DMA_DIPR_TASK2 (0x00000004)
-+#define MCF_DMA_DIPR_TASK3 (0x00000008)
-+#define MCF_DMA_DIPR_TASK4 (0x00000010)
-+#define MCF_DMA_DIPR_TASK5 (0x00000020)
-+#define MCF_DMA_DIPR_TASK6 (0x00000040)
-+#define MCF_DMA_DIPR_TASK7 (0x00000080)
-+#define MCF_DMA_DIPR_TASK8 (0x00000100)
-+#define MCF_DMA_DIPR_TASK9 (0x00000200)
-+#define MCF_DMA_DIPR_TASK10 (0x00000400)
-+#define MCF_DMA_DIPR_TASK11 (0x00000800)
-+#define MCF_DMA_DIPR_TASK12 (0x00001000)
-+#define MCF_DMA_DIPR_TASK13 (0x00002000)
-+#define MCF_DMA_DIPR_TASK14 (0x00004000)
-+#define MCF_DMA_DIPR_TASK15 (0x00008000)
-+
-+/* Bit definitions and macros for MCF_DMA_DIMR */
-+#define MCF_DMA_DIMR_TASK0 (0x00000001)
-+#define MCF_DMA_DIMR_TASK1 (0x00000002)
-+#define MCF_DMA_DIMR_TASK2 (0x00000004)
-+#define MCF_DMA_DIMR_TASK3 (0x00000008)
-+#define MCF_DMA_DIMR_TASK4 (0x00000010)
-+#define MCF_DMA_DIMR_TASK5 (0x00000020)
-+#define MCF_DMA_DIMR_TASK6 (0x00000040)
-+#define MCF_DMA_DIMR_TASK7 (0x00000080)
-+#define MCF_DMA_DIMR_TASK8 (0x00000100)
-+#define MCF_DMA_DIMR_TASK9 (0x00000200)
-+#define MCF_DMA_DIMR_TASK10 (0x00000400)
-+#define MCF_DMA_DIMR_TASK11 (0x00000800)
-+#define MCF_DMA_DIMR_TASK12 (0x00001000)
-+#define MCF_DMA_DIMR_TASK13 (0x00002000)
-+#define MCF_DMA_DIMR_TASK14 (0x00004000)
-+#define MCF_DMA_DIMR_TASK15 (0x00008000)
-+
-+/* Bit definitions and macros for MCF_DMA_IMCR */
-+#define MCF_DMA_IMCR_SRC16(x) (((x)&0x00000003)<<0)
-+#define MCF_DMA_IMCR_SRC17(x) (((x)&0x00000003)<<2)
-+#define MCF_DMA_IMCR_SRC18(x) (((x)&0x00000003)<<4)
-+#define MCF_DMA_IMCR_SRC19(x) (((x)&0x00000003)<<6)
-+#define MCF_DMA_IMCR_SRC20(x) (((x)&0x00000003)<<8)
-+#define MCF_DMA_IMCR_SRC21(x) (((x)&0x00000003)<<10)
-+#define MCF_DMA_IMCR_SRC22(x) (((x)&0x00000003)<<12)
-+#define MCF_DMA_IMCR_SRC23(x) (((x)&0x00000003)<<14)
-+#define MCF_DMA_IMCR_SRC24(x) (((x)&0x00000003)<<16)
-+#define MCF_DMA_IMCR_SRC25(x) (((x)&0x00000003)<<18)
-+#define MCF_DMA_IMCR_SRC26(x) (((x)&0x00000003)<<20)
-+#define MCF_DMA_IMCR_SRC27(x) (((x)&0x00000003)<<22)
-+#define MCF_DMA_IMCR_SRC28(x) (((x)&0x00000003)<<24)
-+#define MCF_DMA_IMCR_SRC29(x) (((x)&0x00000003)<<26)
-+#define MCF_DMA_IMCR_SRC30(x) (((x)&0x00000003)<<28)
-+#define MCF_DMA_IMCR_SRC31(x) (((x)&0x00000003)<<30)
-+#define MCF_DMA_IMCR_SRC16_FEC0RX (0x00000000)
-+#define MCF_DMA_IMCR_SRC17_FEC0TX (0x00000000)
-+#define MCF_DMA_IMCR_SRC18_FEC0RX (0x00000020)
-+#define MCF_DMA_IMCR_SRC19_FEC0TX (0x00000080)
-+#define MCF_DMA_IMCR_SRC20_FEC1RX (0x00000100)
-+#define MCF_DMA_IMCR_SRC21_DREQ1 (0x00000000)
-+#define MCF_DMA_IMCR_SRC21_FEC1TX (0x00000400)
-+#define MCF_DMA_IMCR_SRC22_FEC0RX (0x00001000)
-+#define MCF_DMA_IMCR_SRC23_FEC0TX (0x00004000)
-+#define MCF_DMA_IMCR_SRC24_CTM0 (0x00010000)
-+#define MCF_DMA_IMCR_SRC24_FEC1RX (0x00020000)
-+#define MCF_DMA_IMCR_SRC25_CTM1 (0x00040000)
-+#define MCF_DMA_IMCR_SRC25_FEC1TX (0x00080000)
-+#define MCF_DMA_IMCR_SRC26_USBEP4 (0x00000000)
-+#define MCF_DMA_IMCR_SRC26_CTM2 (0x00200000)
-+#define MCF_DMA_IMCR_SRC27_USBEP5 (0x00000000)
-+#define MCF_DMA_IMCR_SRC27_CTM3 (0x00800000)
-+#define MCF_DMA_IMCR_SRC28_USBEP6 (0x00000000)
-+#define MCF_DMA_IMCR_SRC28_CTM4 (0x01000000)
-+#define MCF_DMA_IMCR_SRC28_DREQ1 (0x02000000)
-+#define MCF_DMA_IMCR_SRC28_PSC2RX (0x03000000)
-+#define MCF_DMA_IMCR_SRC29_DREQ1 (0x04000000)
-+#define MCF_DMA_IMCR_SRC29_CTM5 (0x08000000)
-+#define MCF_DMA_IMCR_SRC29_PSC2TX (0x0C000000)
-+#define MCF_DMA_IMCR_SRC30_FEC1RX (0x00000000)
-+#define MCF_DMA_IMCR_SRC30_CTM6 (0x10000000)
-+#define MCF_DMA_IMCR_SRC30_PSC3RX (0x30000000)
-+#define MCF_DMA_IMCR_SRC31_FEC1TX (0x00000000)
-+#define MCF_DMA_IMCR_SRC31_CTM7 (0x80000000)
-+#define MCF_DMA_IMCR_SRC31_PSC3TX (0xC0000000)
-+
-+#endif /* __MCF548X_DMA_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485dspi.h
-@@ -0,0 +1,146 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * File: mcf548x_dspi.h
-+ * Purpose: Register and bit definitions for the MCF548X
-+ *
-+ * Notes:
-+ *
-+ */
-+
-+#ifndef _M5485DSPI_H_
-+#define _M5485DSPI_H_
-+
-+/*
-+ *
-+ * DMA Serial Peripheral Interface (DSPI)
-+ *
-+ */
-+
-+/* Register read/write macros */
-+#define MCF_DSPI_DMCR MCF_REG32(0x008A00)
-+#define MCF_DSPI_DTCR MCF_REG32(0x008A08)
-+#define MCF_DSPI_DCTAR0 MCF_REG32(0x008A0C)
-+#define MCF_DSPI_DCTAR1 MCF_REG32(0x008A10)
-+#define MCF_DSPI_DCTAR2 MCF_REG32(0x008A14)
-+#define MCF_DSPI_DCTAR3 MCF_REG32(0x008A18)
-+#define MCF_DSPI_DCTAR4 MCF_REG32(0x008A1C)
-+#define MCF_DSPI_DCTAR5 MCF_REG32(0x008A20)
-+#define MCF_DSPI_DCTAR6 MCF_REG32(0x008A24)
-+#define MCF_DSPI_DCTAR7 MCF_REG32(0x008A28)
-+#define MCF_DSPI_DCTARn(x) MCF_REG32(0x008A0C+(x*4))
-+#define MCF_DSPI_DSR MCF_REG32(0x008A2C)
-+#define MCF_DSPI_DRSER MCF_REG32(0x008A30)
-+#define MCF_DSPI_DTFR MCF_REG32(0x008A34)
-+#define MCF_DSPI_DRFR MCF_REG32(0x008A38)
-+#define MCF_DSPI_DTFDR0 MCF_REG32(0x008A3C)
-+#define MCF_DSPI_DTFDR1 MCF_REG32(0x008A40)
-+#define MCF_DSPI_DTFDR2 MCF_REG32(0x008A44)
-+#define MCF_DSPI_DTFDR3 MCF_REG32(0x008A48)
-+#define MCF_DSPI_DTFDRn(x) MCF_REG32(0x008A3C+(x*4))
-+#define MCF_DSPI_DRFDR0 MCF_REG32(0x008A7C)
-+#define MCF_DSPI_DRFDR1 MCF_REG32(0x008A80)
-+#define MCF_DSPI_DRFDR2 MCF_REG32(0x008A84)
-+#define MCF_DSPI_DRFDR3 MCF_REG32(0x008A88)
-+#define MCF_DSPI_DRFDRn(x) MCF_REG32(0x008A7C+(x*4))
-+
-+/* Bit definitions and macros for MCF_DSPI_DMCR */
-+#define MCF_DSPI_DMCR_HALT (0x00000001)
-+#define MCF_DSPI_DMCR_SMPL_PT(x) (((x)&0x00000003)<<8)
-+#define MCF_DSPI_DMCR_CRXF (0x00000400)
-+#define MCF_DSPI_DMCR_CTXF (0x00000800)
-+#define MCF_DSPI_DMCR_DRXF (0x00001000)
-+#define MCF_DSPI_DMCR_DTXF (0x00002000)
-+#define MCF_DSPI_DMCR_CSIS0 (0x00010000)
-+#define MCF_DSPI_DMCR_CSIS2 (0x00040000)
-+#define MCF_DSPI_DMCR_CSIS3 (0x00080000)
-+#define MCF_DSPI_DMCR_CSIS5 (0x00200000)
-+#define MCF_DSPI_DMCR_ROOE (0x01000000)
-+#define MCF_DSPI_DMCR_PCSSE (0x02000000)
-+#define MCF_DSPI_DMCR_MTFE (0x04000000)
-+#define MCF_DSPI_DMCR_FRZ (0x08000000)
-+#define MCF_DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28)
-+#define MCF_DSPI_DMCR_CSCK (0x40000000)
-+#define MCF_DSPI_DMCR_MSTR (0x80000000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DTCR */
-+#define MCF_DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_DSPI_DCTARn */
-+#define MCF_DSPI_DCTAR_BR(x) (((x)&0x0000000F)<<0)
-+#define MCF_DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4)
-+#define MCF_DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8)
-+#define MCF_DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12)
-+#define MCF_DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16)
-+#define MCF_DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18)
-+#define MCF_DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20)
-+#define MCF_DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22)
-+#define MCF_DSPI_DCTAR_LSBFE (0x01000000)
-+#define MCF_DSPI_DCTAR_CPHA (0x02000000)
-+#define MCF_DSPI_DCTAR_CPOL (0x04000000)
-+/* #define MCF_DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27) */
-+#define MCF_DSPI_DCTAR_FMSZ(x) (((x)&0x0000000F)<<27)
-+#define MCF_DSPI_DCTAR_PCSSCK_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PCSSCK_3CLK (0x00400000)
-+#define MCF_DSPI_DCTAR_PCSSCK_5CLK (0x00800000)
-+#define MCF_DSPI_DCTAR_PCSSCK_7CLK (0x00A00000)
-+#define MCF_DSPI_DCTAR_PASC_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PASC_3CLK (0x00100000)
-+#define MCF_DSPI_DCTAR_PASC_5CLK (0x00200000)
-+#define MCF_DSPI_DCTAR_PASC_7CLK (0x00300000)
-+#define MCF_DSPI_DCTAR_PDT_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PDT_3CLK (0x00040000)
-+#define MCF_DSPI_DCTAR_PDT_5CLK (0x00080000)
-+#define MCF_DSPI_DCTAR_PDT_7CLK (0x000A0000)
-+#define MCF_DSPI_DCTAR_PBR_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PBR_3CLK (0x00010000)
-+#define MCF_DSPI_DCTAR_PBR_5CLK (0x00020000)
-+#define MCF_DSPI_DCTAR_PBR_7CLK (0x00030000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DSR */
-+#define MCF_DSPI_DSR_RXPTR(x) (((x)&0x0000000F)<<0)
-+#define MCF_DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4)
-+#define MCF_DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8)
-+#define MCF_DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12)
-+#define MCF_DSPI_DSR_RFDF (0x00020000)
-+#define MCF_DSPI_DSR_RFOF (0x00080000)
-+#define MCF_DSPI_DSR_TFFF (0x02000000)
-+#define MCF_DSPI_DSR_TFUF (0x08000000)
-+#define MCF_DSPI_DSR_EOQF (0x10000000)
-+#define MCF_DSPI_DSR_TXRXS (0x40000000)
-+#define MCF_DSPI_DSR_TCF (0x80000000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DRSER */
-+#define MCF_DSPI_DRSER_RFDFS (0x00010000)
-+#define MCF_DSPI_DRSER_RFDFE (0x00020000)
-+#define MCF_DSPI_DRSER_RFOFE (0x00080000)
-+#define MCF_DSPI_DRSER_TFFFS (0x01000000)
-+#define MCF_DSPI_DRSER_TFFFE (0x02000000)
-+#define MCF_DSPI_DRSER_TFUFE (0x08000000)
-+#define MCF_DSPI_DRSER_EOQFE (0x10000000)
-+#define MCF_DSPI_DRSER_TCFE (0x80000000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DTFR */
-+#define MCF_DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_DSPI_DTFR_CS0 (0x00010000)
-+#define MCF_DSPI_DTFR_CS2 (0x00040000)
-+#define MCF_DSPI_DTFR_CS3 (0x00080000)
-+#define MCF_DSPI_DTFR_CS5 (0x00200000)
-+#define MCF_DSPI_DTFR_CTCNT (0x04000000)
-+#define MCF_DSPI_DTFR_EOQ (0x08000000)
-+#define MCF_DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28)
-+#define MCF_DSPI_DTFR_CONT (0x80000000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DRFR */
-+#define MCF_DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_DSPI_DTFDRn */
-+#define MCF_DSPI_DTFDRn_TXDATA(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_DSPI_DTFDRn_TXCMD(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_DSPI_DRFDRn */
-+#define MCF_DSPI_DRFDRn_RXDATA(x) (((x)&0x0000FFFF)<<0)
-+
-+/********************************************************************/
-+
-+#endif /* _M5485DSPI_H_ */
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485gpio.h
-@@ -0,0 +1,695 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * File: mcf548x_gpio.h
-+ * Purpose: Register and bit definitions for the MCF548X
-+ *
-+ * Notes:
-+ *
-+ */
-+
-+#ifndef _M5485GPIO_H_
-+#define _M5485GPIO_H_
-+
-+/*********************************************************************
-+*
-+* General Purpose I/O (GPIO)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_GPIO_PODR_FBCTL MCF_REG08(0x000A00)
-+#define MCF_GPIO_PODR_FBCS MCF_REG08(0x000A01)
-+#define MCF_GPIO_PODR_DMA MCF_REG08(0x000A02)
-+#define MCF_GPIO_PODR_FEC0H MCF_REG08(0x000A04)
-+#define MCF_GPIO_PODR_FEC0L MCF_REG08(0x000A05)
-+#define MCF_GPIO_PODR_FEC1H MCF_REG08(0x000A06)
-+#define MCF_GPIO_PODR_FEC1L MCF_REG08(0x000A07)
-+#define MCF_GPIO_PODR_FECI2C MCF_REG08(0x000A08)
-+#define MCF_GPIO_PODR_PCIBG MCF_REG08(0x000A09)
-+#define MCF_GPIO_PODR_PCIBR MCF_REG08(0x000A0A)
-+#define MCF_GPIO_PODR_PSC3PSC2 MCF_REG08(0x000A0C)
-+#define MCF_GPIO_PODR_PSC1PSC0 MCF_REG08(0x000A0D)
-+#define MCF_GPIO_PODR_DSPI MCF_REG08(0x000A0E)
-+#define MCF_GPIO_PDDR_FBCTL MCF_REG08(0x000A10)
-+#define MCF_GPIO_PDDR_FBCS MCF_REG08(0x000A11)
-+#define MCF_GPIO_PDDR_DMA MCF_REG08(0x000A12)
-+#define MCF_GPIO_PDDR_FEC0H MCF_REG08(0x000A14)
-+#define MCF_GPIO_PDDR_FEC0L MCF_REG08(0x000A15)
-+#define MCF_GPIO_PDDR_FEC1H MCF_REG08(0x000A16)
-+#define MCF_GPIO_PDDR_FEC1L MCF_REG08(0x000A17)
-+#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0x000A18)
-+#define MCF_GPIO_PDDR_PCIBG MCF_REG08(0x000A19)
-+#define MCF_GPIO_PDDR_PCIBR MCF_REG08(0x000A1A)
-+#define MCF_GPIO_PDDR_PSC3PSC2 MCF_REG08(0x000A1C)
-+#define MCF_GPIO_PDDR_PSC1PSC0 MCF_REG08(0x000A1D)
-+#define MCF_GPIO_PDDR_DSPI MCF_REG08(0x000A1E)
-+#define MCF_GPIO_PPDSDR_FBCTL MCF_REG08(0x000A20)
-+#define MCF_GPIO_PPDSDR_FBCS MCF_REG08(0x000A21)
-+#define MCF_GPIO_PPDSDR_DMA MCF_REG08(0x000A22)
-+#define MCF_GPIO_PPDSDR_FEC0H MCF_REG08(0x000A24)
-+#define MCF_GPIO_PPDSDR_FEC0L MCF_REG08(0x000A25)
-+#define MCF_GPIO_PPDSDR_FEC1H MCF_REG08(0x000A26)
-+#define MCF_GPIO_PPDSDR_FEC1L MCF_REG08(0x000A27)
-+#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0x000A28)
-+#define MCF_GPIO_PPDSDR_PCIBG MCF_REG08(0x000A29)
-+#define MCF_GPIO_PPDSDR_PCIBR MCF_REG08(0x000A2A)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2 MCF_REG08(0x000A2C)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0 MCF_REG08(0x000A2D)
-+#define MCF_GPIO_PPDSDR_DSPI MCF_REG08(0x000A2E)
-+#define MCF_GPIO_PCLRR_FBCTL MCF_REG08(0x000A30)
-+#define MCF_GPIO_PCLRR_FBCS MCF_REG08(0x000A31)
-+#define MCF_GPIO_PCLRR_DMA MCF_REG08(0x000A32)
-+#define MCF_GPIO_PCLRR_FEC0H MCF_REG08(0x000A34)
-+#define MCF_GPIO_PCLRR_FEC0L MCF_REG08(0x000A35)
-+#define MCF_GPIO_PCLRR_FEC1H MCF_REG08(0x000A36)
-+#define MCF_GPIO_PCLRR_FEC1L MCF_REG08(0x000A37)
-+#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0x000A38)
-+#define MCF_GPIO_PCLRR_PCIBG MCF_REG08(0x000A39)
-+#define MCF_GPIO_PCLRR_PCIBR MCF_REG08(0x000A3A)
-+#define MCF_GPIO_PCLRR_PSC3PSC2 MCF_REG08(0x000A3C)
-+#define MCF_GPIO_PCLRR_PSC1PSC0 MCF_REG08(0x000A3D)
-+#define MCF_GPIO_PCLRR_DSPI MCF_REG08(0x000A3E)
-+#define MCF_GPIO_PAR_FBCTL MCF_REG16(0x000A40)
-+#define MCF_GPIO_PAR_FBCS MCF_REG08(0x000A42)
-+#define MCF_GPIO_PAR_DMA MCF_REG08(0x000A43)
-+#define MCF_GPIO_PAR_FECI2CIRQ MCF_REG16(0x000A44)
-+#define MCF_GPIO_PAR_PCIBG MCF_REG16(0x000A48)
-+#define MCF_GPIO_PAR_PCIBR MCF_REG16(0x000A4A)
-+#define MCF_GPIO_PAR_PSC3 MCF_REG08(0x000A4C)
-+#define MCF_GPIO_PAR_PSC2 MCF_REG08(0x000A4D)
-+#define MCF_GPIO_PAR_PSC1 MCF_REG08(0x000A4E)
-+#define MCF_GPIO_PAR_PSC0 MCF_REG08(0x000A4F)
-+#define MCF_GPIO_PAR_DSPI MCF_REG16(0x000A50)
-+#define MCF_GPIO_PAR_TIMER MCF_REG08(0x000A52)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FBCTL */
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL0 (0x01)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL1 (0x02)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL2 (0x04)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL3 (0x08)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL4 (0x10)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL5 (0x20)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL6 (0x40)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FBCS */
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS1 (0x02)
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS2 (0x04)
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS3 (0x08)
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS4 (0x10)
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS5 (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_DMA */
-+#define MCF_GPIO_PODR_DMA_PODRDMA0 (0x01)
-+#define MCF_GPIO_PODR_DMA_PODRDMA1 (0x02)
-+#define MCF_GPIO_PODR_DMA_PODRDMA2 (0x04)
-+#define MCF_GPIO_PODR_DMA_PODRDMA3 (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FEC0H */
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H0 (0x01)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H1 (0x02)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H2 (0x04)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H3 (0x08)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H4 (0x10)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H5 (0x20)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H6 (0x40)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FEC0L */
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L0 (0x01)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L1 (0x02)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L2 (0x04)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L3 (0x08)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L4 (0x10)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L5 (0x20)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L6 (0x40)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FEC1H */
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H0 (0x01)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H1 (0x02)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H2 (0x04)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H3 (0x08)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H4 (0x10)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H5 (0x20)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H6 (0x40)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FEC1L */
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L0 (0x01)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L1 (0x02)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L2 (0x04)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L3 (0x08)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L4 (0x10)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L5 (0x20)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L6 (0x40)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
-+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C0 (0x01)
-+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C1 (0x02)
-+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C2 (0x04)
-+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C3 (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_PCIBG */
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG0 (0x01)
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG1 (0x02)
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG2 (0x04)
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG3 (0x08)
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG4 (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_PCIBR */
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR0 (0x01)
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR1 (0x02)
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR2 (0x04)
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR3 (0x08)
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR4 (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_PSC3PSC2 */
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC20 (0x01)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC21 (0x02)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC22 (0x04)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC23 (0x08)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC24 (0x10)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC25 (0x20)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC26 (0x40)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC27 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_PSC1PSC0 */
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC00 (0x01)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC01 (0x02)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC02 (0x04)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC03 (0x08)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC04 (0x10)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC05 (0x20)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC06 (0x40)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC07 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_DSPI */
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI0 (0x01)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI1 (0x02)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI2 (0x04)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI3 (0x08)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI4 (0x10)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI5 (0x20)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI6 (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FBCTL */
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL0 (0x01)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL1 (0x02)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL2 (0x04)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL3 (0x08)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL4 (0x10)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL5 (0x20)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL6 (0x40)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FBCS */
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS1 (0x02)
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS2 (0x04)
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS3 (0x08)
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS4 (0x10)
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS5 (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_DMA */
-+#define MCF_GPIO_PDDR_DMA_PDDRDMA0 (0x01)
-+#define MCF_GPIO_PDDR_DMA_PDDRDMA1 (0x02)
-+#define MCF_GPIO_PDDR_DMA_PDDRDMA2 (0x04)
-+#define MCF_GPIO_PDDR_DMA_PDDRDMA3 (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0H */
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H0 (0x01)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H1 (0x02)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H2 (0x04)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H3 (0x08)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H4 (0x10)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H5 (0x20)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H6 (0x40)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0L */
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L0 (0x01)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L1 (0x02)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L2 (0x04)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L3 (0x08)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L4 (0x10)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L5 (0x20)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L6 (0x40)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1H */
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H0 (0x01)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H1 (0x02)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H2 (0x04)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H3 (0x08)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H4 (0x10)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H5 (0x20)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H6 (0x40)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1L */
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L0 (0x01)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L1 (0x02)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L2 (0x04)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L3 (0x08)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L4 (0x10)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L5 (0x20)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L6 (0x40)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
-+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C0 (0x01)
-+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C1 (0x02)
-+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C2 (0x04)
-+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C3 (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBG */
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG0 (0x01)
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG1 (0x02)
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG2 (0x04)
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG3 (0x08)
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG4 (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBR */
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR0 (0x01)
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR1 (0x02)
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR2 (0x04)
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR3 (0x08)
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR4 (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_PSC3PSC2 */
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC20 (0x01)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC21 (0x02)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC22 (0x04)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC23 (0x08)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC24 (0x10)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC25 (0x20)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC26 (0x40)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC27 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_PSC1PSC0 */
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC00 (0x01)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC01 (0x02)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC02 (0x04)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC03 (0x08)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC04 (0x10)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC05 (0x20)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC06 (0x40)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC07 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_DSPI */
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI0 (0x01)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI1 (0x02)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI2 (0x04)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI3 (0x08)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI4 (0x10)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI5 (0x20)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI6 (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCTL */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL0 (0x01)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL1 (0x02)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL2 (0x04)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL3 (0x08)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL4 (0x10)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL5 (0x20)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL6 (0x40)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCS */
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS1 (0x02)
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS2 (0x04)
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS3 (0x08)
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS4 (0x10)
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS5 (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_DMA */
-+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA0 (0x01)
-+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA1 (0x02)
-+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA2 (0x04)
-+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA3 (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0H */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H0 (0x01)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H1 (0x02)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H2 (0x04)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H3 (0x08)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H4 (0x10)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H5 (0x20)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H6 (0x40)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0L */
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L0 (0x01)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L1 (0x02)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L2 (0x04)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L3 (0x08)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L4 (0x10)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L5 (0x20)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L6 (0x40)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1H */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H0 (0x01)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H1 (0x02)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H2 (0x04)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H3 (0x08)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H4 (0x10)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H5 (0x20)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H6 (0x40)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1L */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L0 (0x01)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L1 (0x02)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L2 (0x04)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L3 (0x08)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L4 (0x10)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L5 (0x20)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L6 (0x40)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C0 (0x01)
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C1 (0x02)
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C2 (0x04)
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C3 (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBG */
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG0 (0x01)
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG1 (0x02)
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG2 (0x04)
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG3 (0x08)
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG4 (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBR */
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR0 (0x01)
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR1 (0x02)
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR2 (0x04)
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR3 (0x08)
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR4 (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC3PSC2 */
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC20 (0x01)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC21 (0x02)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC22 (0x04)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC23 (0x08)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC24 (0x10)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC25 (0x20)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC26 (0x40)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC27 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC1PSC0 */
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC00 (0x01)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC01 (0x02)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC02 (0x04)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC03 (0x08)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC04 (0x10)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC05 (0x20)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC06 (0x40)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC07 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_DSPI */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI0 (0x01)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI1 (0x02)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI2 (0x04)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI3 (0x08)
-+#define MCF_GPIO_PPDSDR_DSPI_PDDRDSPI4 (0x10)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI5 (0x20)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI6 (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCTL */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL0 (0x01)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL1 (0x02)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL2 (0x04)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL3 (0x08)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL4 (0x10)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL5 (0x20)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL6 (0x40)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCS */
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS1 (0x02)
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS2 (0x04)
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS3 (0x08)
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS4 (0x10)
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS5 (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_DMA */
-+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA0 (0x01)
-+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA1 (0x02)
-+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA2 (0x04)
-+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA3 (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0H */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H0 (0x01)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H1 (0x02)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H2 (0x04)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H3 (0x08)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H4 (0x10)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H5 (0x20)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H6 (0x40)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0L */
-+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L0 (0x01)
-+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L1 (0x02)
-+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L2 (0x04)
-+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L3 (0x08)
-+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L4 (0x10)
-+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L5 (0x20)
-+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L6 (0x40)
-+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1H */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H0 (0x01)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H1 (0x02)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H2 (0x04)
-+#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H3 (0x08)
-+#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H4 (0x10)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H5 (0x20)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H6 (0x40)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1L */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L0 (0x01)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L1 (0x02)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L2 (0x04)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L3 (0x08)
-+#define MCF_GPIO_PCLRR_FEC1L_PODRFEC1L4 (0x10)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L5 (0x20)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L6 (0x40)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L7 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C0 (0x01)
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C1 (0x02)
-+#define MCF_GPIO_PCLRR_FECI2C_PODRFECI2C2 (0x04)
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C3 (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBG */
-+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG0 (0x01)
-+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG1 (0x02)
-+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG2 (0x04)
-+#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG3 (0x08)
-+#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG4 (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBR */
-+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR0 (0x01)
-+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR1 (0x02)
-+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR2 (0x04)
-+#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR3 (0x08)
-+#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR4 (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC3PSC2 */
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC20 (0x01)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC21 (0x02)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC22 (0x04)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC23 (0x08)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC24 (0x10)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC25 (0x20)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC26 (0x40)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC27 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC1PSC0 */
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC00 (0x01)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC01 (0x02)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC02 (0x04)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC03 (0x08)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC04 (0x10)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC05 (0x20)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PODRPSC1PSC06 (0x40)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC07 (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_DSPI */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI0 (0x01)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI1 (0x02)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI2 (0x04)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI3 (0x08)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI4 (0x10)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI5 (0x20)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI6 (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_FBCTL */
-+#define MCF_GPIO_PAR_FBCTL_PAR_TS(x) (((x)&0x0003)<<0)
-+#define MCF_GPIO_PAR_FBCTL_PAR_TA (0x0004)
-+#define MCF_GPIO_PAR_FBCTL_PAR_RWB (0x0010)
-+#define MCF_GPIO_PAR_FBCTL_PAR_OE (0x0040)
-+#define MCF_GPIO_PAR_FBCTL_PAR_BWE0 (0x0100)
-+#define MCF_GPIO_PAR_FBCTL_PAR_BWE1 (0x0400)
-+#define MCF_GPIO_PAR_FBCTL_PAR_BWE2 (0x1000)
-+#define MCF_GPIO_PAR_FBCTL_PAR_BWE3 (0x4000)
-+#define MCF_GPIO_PAR_FBCTL_PAR_TS_GPIO (0)
-+#define MCF_GPIO_PAR_FBCTL_PAR_TS_TBST (2)
-+#define MCF_GPIO_PAR_FBCTL_PAR_TS_TS (3)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_FBCS */
-+#define MCF_GPIO_PAR_FBCS_PAR_CS1 (0x02)
-+#define MCF_GPIO_PAR_FBCS_PAR_CS2 (0x04)
-+#define MCF_GPIO_PAR_FBCS_PAR_CS3 (0x08)
-+#define MCF_GPIO_PAR_FBCS_PAR_CS4 (0x10)
-+#define MCF_GPIO_PAR_FBCS_PAR_CS5 (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_DMA */
-+#define MCF_GPIO_PAR_DMA_PAR_DREQ0(x) (((x)&0x03)<<0)
-+#define MCF_GPIO_PAR_DMA_PAR_DREQ1(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_DMA_PAR_DACK0(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_DMA_PAR_DACK1(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_DMA_PAR_DACKx_GPIO (0)
-+#define MCF_GPIO_PAR_DMA_PAR_DACKx_TOUT (2)
-+#define MCF_GPIO_PAR_DMA_PAR_DACKx_DACK (3)
-+#define MCF_GPIO_PAR_DMA_PAR_DREQx_GPIO (0)
-+#define MCF_GPIO_PAR_DMA_PAR_DREQx_TIN (2)
-+#define MCF_GPIO_PAR_DMA_PAR_DREQx_DREQ (3)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_FECI2CIRQ */
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ5 (0x0001)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ6 (0x0002)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SCL (0x0004)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SDA (0x0008)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC(x) (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO(x) (((x)&0x0003)<<8)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MII (0x0400)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E17 (0x0800)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDC (0x1000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDIO (0x2000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MII (0x4000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E07 (0x8000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_CANRX (0x0000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_SDA (0x0200)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_EMDIO (0x0300)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_CANTX (0x0000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_SCL (0x0080)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_EMDC (0x00C0)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PCIBG */
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG0(x) (((x)&0x0003)<<0)
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG1(x) (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG2(x) (((x)&0x0003)<<4)
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG3(x) (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG4(x) (((x)&0x0003)<<8)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PCIBR */
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG0(x) (((x)&0x0003)<<0)
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG1(x) (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG2(x) (((x)&0x0003)<<4)
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG3(x) (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBR4(x) (((x)&0x0003)<<8)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PSC3 */
-+#define MCF_GPIO_PAR_PSC3_PAR_TXD3 (0x04)
-+#define MCF_GPIO_PAR_PSC3_PAR_RXD3 (0x08)
-+#define MCF_GPIO_PAR_PSC3_PAR_RTS3(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS3(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_GPIO (0x00)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_BCLK (0x80)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_CTS (0xC0)
-+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_GPIO (0x00)
-+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_FSYNC (0x20)
-+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_RTS (0x30)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS2_CANRX (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PSC2 */
-+#define MCF_GPIO_PAR_PSC2_PAR_TXD2 (0x04)
-+#define MCF_GPIO_PAR_PSC2_PAR_RXD2 (0x08)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_PSC2_PAR_CTS2(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_GPIO (0x00)
-+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_BCLK (0x80)
-+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_CTS (0xC0)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_GPIO (0x00)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANTX (0x10)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_FSYNC (0x20)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_RTS (0x30)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANRX (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PSC1 */
-+#define MCF_GPIO_PAR_PSC1_PAR_TXD1 (0x04)
-+#define MCF_GPIO_PAR_PSC1_PAR_RXD1 (0x08)
-+#define MCF_GPIO_PAR_PSC1_PAR_RTS1(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_PSC1_PAR_CTS1(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_GPIO (0x00)
-+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_BCLK (0x80)
-+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_CTS (0xC0)
-+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_GPIO (0x00)
-+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_FSYNC (0x20)
-+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_RTS (0x30)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PSC0 */
-+#define MCF_GPIO_PAR_PSC0_PAR_TXD0 (0x04)
-+#define MCF_GPIO_PAR_PSC0_PAR_RXD0 (0x08)
-+#define MCF_GPIO_PAR_PSC0_PAR_RTS0(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_PSC0_PAR_CTS0(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_GPIO (0x00)
-+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_BCLK (0x80)
-+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_CTS (0xC0)
-+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_GPIO (0x00)
-+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_FSYNC (0x20)
-+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_RTS (0x30)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_DSPI */
-+#define MCF_GPIO_PAR_DSPI_PAR_SOUT(x) (((x)&0x0003)<<0)
-+#define MCF_GPIO_PAR_DSPI_PAR_SIN(x) (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK(x) (((x)&0x0003)<<4)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0(x) (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2(x) (((x)&0x0003)<<8)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3(x) (((x)&0x0003)<<10)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS5 (0x1000)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3_GPIO (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3_CANTX (0x0400)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3_TOUT (0x0800)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS (0x0C00)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2_GPIO (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2_CANTX (0x0100)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2_TOUT (0x0200)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS (0x0300)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0_GPIO (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0_FSYNC (0x0040)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0_RTS (0x0080)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS (0x00C0)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK_GPIO (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK_BCLK (0x0010)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK_CTS (0x0020)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK_SCK (0x0030)
-+#define MCF_GPIO_PAR_DSPI_PAR_SIN_GPIO (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_SIN_RXD (0x0008)
-+#define MCF_GPIO_PAR_DSPI_PAR_SIN_SIN (0x000C)
-+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_GPIO (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_TXD (0x0002)
-+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT (0x0003)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
-+#define MCF_GPIO_PAR_TIMER_PAR_TOUT2 (0x01)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<1)
-+#define MCF_GPIO_PAR_TIMER_PAR_TOUT3 (0x08)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_CANRX (0x00)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_IRQ (0x20)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN (0x30)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_CANRX (0x00)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_IRQ (0x04)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN (0x06)
-+
-+/********************************************************************/
-+
-+#endif /* _M5485GPIO_H_ */
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485gpt.h
-@@ -0,0 +1,90 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * File: mcf548x_gpt.h
-+ * Purpose: Register and bit definitions for the MCF548X
-+ *
-+ * Notes:
-+ *
-+ */
-+
-+#ifndef __MCF548X_GPT_H__
-+#define __MCF548X_GPT_H__
-+
-+/*********************************************************************
-+*
-+* General Purpose Timers (GPT)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_GPT_GMS0 MCF_REG32(0x000800)
-+#define MCF_GPT_GCIR0 MCF_REG32(0x000804)
-+#define MCF_GPT_GPWM0 MCF_REG32(0x000808)
-+#define MCF_GPT_GSR0 MCF_REG32(0x00080C)
-+#define MCF_GPT_GMS1 MCF_REG32(0x000810)
-+#define MCF_GPT_GCIR1 MCF_REG32(0x000814)
-+#define MCF_GPT_GPWM1 MCF_REG32(0x000818)
-+#define MCF_GPT_GSR1 MCF_REG32(0x00081C)
-+#define MCF_GPT_GMS2 MCF_REG32(0x000820)
-+#define MCF_GPT_GCIR2 MCF_REG32(0x000824)
-+#define MCF_GPT_GPWM2 MCF_REG32(0x000828)
-+#define MCF_GPT_GSR2 MCF_REG32(0x00082C)
-+#define MCF_GPT_GMS3 MCF_REG32(0x000830)
-+#define MCF_GPT_GCIR3 MCF_REG32(0x000834)
-+#define MCF_GPT_GPWM3 MCF_REG32(0x000838)
-+#define MCF_GPT_GSR3 MCF_REG32(0x00083C)
-+#define MCF_GPT_GMS(x) MCF_REG32(0x000800+((x)*0x010))
-+#define MCF_GPT_GCIR(x) MCF_REG32(0x000804+((x)*0x010))
-+#define MCF_GPT_GPWM(x) MCF_REG32(0x000808+((x)*0x010))
-+#define MCF_GPT_GSR(x) MCF_REG32(0x00080C+((x)*0x010))
-+
-+/* Bit definitions and macros for MCF_GPT_GMS */
-+#define MCF_GPT_GMS_TMS(x) (((x)&0x00000007)<<0)
-+#define MCF_GPT_GMS_GPIO(x) (((x)&0x00000003)<<4)
-+#define MCF_GPT_GMS_IEN (0x00000100)
-+#define MCF_GPT_GMS_OD (0x00000200)
-+#define MCF_GPT_GMS_SC (0x00000400)
-+#define MCF_GPT_GMS_CE (0x00001000)
-+#define MCF_GPT_GMS_WDEN (0x00008000)
-+#define MCF_GPT_GMS_ICT(x) (((x)&0x00000003)<<16)
-+#define MCF_GPT_GMS_OCT(x) (((x)&0x00000003)<<20)
-+#define MCF_GPT_GMS_OCPW(x) (((x)&0x000000FF)<<24)
-+#define MCF_GPT_GMS_OCT_FRCLOW (0x00000000)
-+#define MCF_GPT_GMS_OCT_PULSEHI (0x00100000)
-+#define MCF_GPT_GMS_OCT_PULSELO (0x00200000)
-+#define MCF_GPT_GMS_OCT_TOGGLE (0x00300000)
-+#define MCF_GPT_GMS_ICT_ANY (0x00000000)
-+#define MCF_GPT_GMS_ICT_RISE (0x00010000)
-+#define MCF_GPT_GMS_ICT_FALL (0x00020000)
-+#define MCF_GPT_GMS_ICT_PULSE (0x00030000)
-+#define MCF_GPT_GMS_GPIO_INPUT (0x00000000)
-+#define MCF_GPT_GMS_GPIO_OUTLO (0x00000020)
-+#define MCF_GPT_GMS_GPIO_OUTHI (0x00000030)
-+#define MCF_GPT_GMS_TMS_DISABLE (0x00000000)
-+#define MCF_GPT_GMS_TMS_INCAPT (0x00000001)
-+#define MCF_GPT_GMS_TMS_OUTCAPT (0x00000002)
-+#define MCF_GPT_GMS_TMS_PWM (0x00000003)
-+#define MCF_GPT_GMS_TMS_GPIO (0x00000004)
-+
-+/* Bit definitions and macros for MCF_GPT_GCIR */
-+#define MCF_GPT_GCIR_CNT(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_GPT_GCIR_PRE(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_GPT_GPWM */
-+#define MCF_GPT_GPWM_LOAD (0x00000001)
-+#define MCF_GPT_GPWM_PWMOP (0x00000100)
-+#define MCF_GPT_GPWM_WIDTH(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_GPT_GSR */
-+#define MCF_GPT_GSR_CAPT (0x00000001)
-+#define MCF_GPT_GSR_COMP (0x00000002)
-+#define MCF_GPT_GSR_PWMP (0x00000004)
-+#define MCF_GPT_GSR_TEXP (0x00000008)
-+#define MCF_GPT_GSR_PIN (0x00000100)
-+#define MCF_GPT_GSR_OVF(x) (((x)&0x00000007)<<12)
-+#define MCF_GPT_GSR_CAPTURE(x) (((x)&0x0000FFFF)<<16)
-+
-+#define MCF_GPT_MAX_TIMEOUT 30
-+/********************************************************************/
-+
-+#endif /* __MCF548X_GPT_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485pci.h
-@@ -0,0 +1,380 @@
-+/*
-+ * m5485pci.h -- ColdFire 547x/548x PCI controller support.
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+#ifndef __MCF548X_PCI_H__
-+#define __MCF548X_PCI_H__
-+
-+
-+/* PCI Type 0 Configuration Registers */
-+#define MCF_PCIIDR MCF_REG32(0x000B00)
-+/* PCI Device ID/Vendor ID */
-+#define MCF_PCISCR MCF_REG32(0x000B04)
-+/* PCI Status/Command */
-+#define MCF_PCICCRIR MCF_REG32(0x000B08)
-+/* PCI Class Code / Revision ID */
-+#define MCF_PCICR1 MCF_REG32(0x000B0C)
-+/* PCI Configuration 1 Register */
-+#define MCF_PCIBAR0 MCF_REG32(0x000B10)
-+/* PCI Base Address Register 0 */
-+#define MCF_PCIBAR1 MCF_REG32(0x000B14)
-+/* PCI Base Address Register 1 */
-+#define MCF_PCICCPR MCF_REG32(0x000B28)
-+/* PCI Cardbus CIS Pointer */
-+#define MCF_PCISID MCF_REG32(0x000B2C)
-+/* Subsystem ID/Subsystem Vendor ID*/
-+#define MCF_PCIERBAR MCF_REG32(0x000B30)
-+/* PCI Expansion ROM */
-+#define MCF_PCICPR MCF_REG32(0x000B30)
-+/* PCI Capabilities Pointer */
-+#define MCF_PCICR2 MCF_REG32(0x000B3C)
-+/* PCI Configuration Register 2 */
-+
-+/* General Control/Status Registers */
-+#define MCF_PCIGSCR MCF_REG32(0x000B60)
-+/* Global Status/Control Register */
-+#define MCF_PCITBATR0 MCF_REG32(0x000B64)
-+/* Target Base Address Translation 0*/
-+#define MCF_PCITBATR1 MCF_REG32(0x000B68)
-+/* Target Base Address Translation 1*/
-+#define MCF_PCITCR MCF_REG32(0x000B6C)
-+/* Target Control Register */
-+#define MCF_PCIIW0BTAR MCF_REG32(0x000B70)
-+/* Initiator Window 0 Base Address */
-+#define MCF_PCIIW1BTAR MCF_REG32(0x000B74)
-+/* Initiator Window 1 Base Address */
-+#define MCF_PCIIW2BTAR MCF_REG32(0x000B78)
-+/* Initiator Window 2 Base Address */
-+#define MCF_PCIIWCR MCF_REG32(0x000B80)
-+/* Initiator Window Configuration */
-+#define MCF_PCIICR MCF_REG32(0x000B84)
-+/* Initiator Control Register */
-+#define MCF_PCIISR MCF_REG32(0x000B88)
-+/* Initiator Status Register */
-+#define MCF_PCICAR MCF_REG32(0x000BF8)
-+/* Configuration Address Register */
-+
-+/* CommBus FIFO Transmit Interface Registers */
-+#define MCF_PCITPSR MCF_REG32(0x008400)
-+/* Tx Packet Size Register */
-+#define MCF_PCITSAR MCF_REG32(0x008404)
-+/* Tx Start Address Register */
-+#define MCF_PCITTCR MCF_REG32(0x008408)
-+/* Tx Transaction Control Register */
-+#define MCF_PCITER MCF_REG32(0x00840C)
-+/* Tx Enables Register */
-+#define MCF_PCITNAR MCF_REG32(0x008410)
-+/* Tx Next Address Register */
-+#define MCF_PCITLWR MCF_REG32(0x008414)
-+/* Tx Last Word Register */
-+#define MCF_PCITDCR MCF_REG32(0x008418)
-+/* Tx Done Counts Register */
-+#define MCF_PCITSR MCF_REG32(0x00841C)
-+/* Tx Status Register */
-+#define MCF_PCITFDR MCF_REG32(0x008440)
-+/* Tx FIFO Data Register */
-+#define MCF_PCITFSR MCF_REG32(0x008444)
-+/* Tx FIFO Status Register */
-+#define MCF_PCITFCR MCF_REG32(0x008448)
-+/* Tx FIFO Control Register */
-+#define MCF_PCITFAR MCF_REG32(0x00844C)
-+/* Tx FIFO Alarm Register */
-+#define MCF_PCITFRPR MCF_REG32(0x008450)
-+/* Tx FIFO Read Pointer Register */
-+#define MCF_PCITFWPR MCF_REG32(0x008454)
-+/* Tx FIFO Write Pointer Register */
-+
-+/* CommBus FIFO Receive Interface Registers */
-+#define MCF_PCIRPSR MCF_REG32(0x008480)
-+/* Tx Packet Size Register */
-+#define MCF_PCIRSAR MCF_REG32(0x008484)
-+/* Tx Start Address Register */
-+#define MCF_PCIRTCR MCF_REG32(0x008488)
-+/* Tx Transaction Control Register */
-+#define MCF_PCIRER MCF_REG32(0x00848C)
-+/* Tx Enables Register */
-+#define MCF_PCIRNAR MCF_REG32(0x008490)
-+/* Tx Next Address Register */
-+#define MCF_PCIRDCR MCF_REG32(0x008498)
-+/* Tx Done Counts Register */
-+#define MCF_PCIRSR MCF_REG32(0x00849C)
-+/* Tx Status Register */
-+#define MCF_PCIRFDR MCF_REG32(0x0084C0)
-+/* Tx FIFO Data Register */
-+#define MCF_PCIRFSR MCF_REG32(0x0084C4)
-+/* Tx FIFO Status Register */
-+#define MCF_PCIRFCR MCF_REG32(0x0084C8)
-+/* Tx FIFO Control Register */
-+#define MCF_PCIRFAR MCF_REG32(0x0084CC)
-+/* Tx FIFO Alarm Register */
-+#define MCF_PCIRFRPR MCF_REG32(0x0084D0)
-+/* Tx FIFO Read Pointer Register */
-+#define MCF_PCIRFWPR MCF_REG32(0x0084D4)
-+/* Tx FIFO Write Pointer Register */
-+
-+/* PCI Arbiter Registers */
-+#define MCF_PCIARB_PACR MCF_REG32(0x000C00)
-+#define MCF_PCIARB_PASR MCF_REG32(0x000C04)
-+
-+
-+/* Bit definitions and macros for MCF_PCIIDR */
-+#define MCF_PCIIDR_VENDORID(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_PCIIDR_DEVICEID(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCISCR */
-+#define MCF_PCISCR_M (0x00000002)
-+#define MCF_PCISCR_B (0x00000004)
-+#define MCF_PCISCR_SP (0x00000008)
-+#define MCF_PCISCR_MW (0x00000010)
-+#define MCF_PCISCR_PER (0x00000040)
-+#define MCF_PCISCR_S (0x00000100)
-+#define MCF_PCISCR_F (0x00000200)
-+#define MCF_PCISCR_C (0x00100000)
-+#define MCF_PCISCR_66M (0x00200000)
-+#define MCF_PCISCR_R (0x00400000)
-+#define MCF_PCISCR_FC (0x00800000)
-+#define MCF_PCISCR_DP (0x01000000)
-+#define MCF_PCISCR_DT(x) (((x)&0x00000003)<<25)
-+#define MCF_PCISCR_TS (0x08000000)
-+#define MCF_PCISCR_TR (0x10000000)
-+#define MCF_PCISCR_MA (0x20000000)
-+#define MCF_PCISCR_SE (0x40000000)
-+#define MCF_PCISCR_PE (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCICCRIR */
-+#define MCF_PCICCRIR_REVID(x) (((x)&0x000000FF)<<0)
-+#define MCF_PCICCRIR_CLASSCODE(x) (((x)&0x00FFFFFF)<<8)
-+
-+/* Bit definitions and macros for MCF_PCICR1 */
-+#define MCF_PCICR1_CACHELINESIZE(x) (((x)&0x0000000F)<<0)
-+#define MCF_PCICR1_LATTIMER(x) (((x)&0x000000FF)<<8)
-+#define MCF_PCICR1_HEADERTYPE(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCICR1_BIST(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIBAR# */
-+#define MCF_PCIBAR0_ADDR(x) (((x)&0x00003FFF)<<18)
-+#define MCF_PCIBAR1_ADDR(x) (((x)&0x00000003)<<30)
-+
-+/* Bit definitions and macros for MCF_PCICR2 */
-+#define MCF_PCICR2_INTLINE(x) (((x)&0x000000FF)<<0)
-+#define MCF_PCICR2_INTPIN(x) (((x)&0x000000FF)<<8)
-+#define MCF_PCICR2_MINGNT(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCICR2_MAXLAT(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIGSCR */
-+#define MCF_PCIGSCR_PR (0x00000001)
-+#define MCF_PCIGSCR_SEE (0x00001000)
-+#define MCF_PCIGSCR_PEE (0x00002000)
-+#define MCF_PCIGSCR_SE (0x10000000)
-+#define MCF_PCIGSCR_PE (0x20000000)
-+
-+/* Bit definitions and macros for MCF_PCITBATR0 */
-+#define MCF_PCITBATR0_EN (0x00000001)
-+#define MCF_PCITBATR0_BAT0(x) (((x)&0x00003FFF)<<18)
-+
-+/* Bit definitions and macros for MCF_PCITBATR1 */
-+#define MCF_PCITBATR1_EN (0x00000001)
-+#define MCF_PCITBATR1_BAT1(x) (((x)&0x00000003)<<30)
-+
-+/* Bit definitions and macros for MCF_PCITCR */
-+#define MCF_PCITCR_P (0x00010000)
-+#define MCF_PCITCR_LD (0x01000000)
-+
-+/* Bit definitions and macros for MCF_PCIIW0BTAR */
-+#define MCF_PCIIW0BTAR_WTA0(x) (((x)&0x000000FF)<<8)
-+#define MCF_PCIIW0BTAR_WAM0(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCIIW0BTAR_WBA0(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIIW1BTAR */
-+#define MCF_PCIIW1BTAR_WTA1(x) (((x)&0x000000FF)<<8)
-+#define MCF_PCIIW1BTAR_WAM1(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCIIW1BTAR_WBA1(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIIW2BTAR */
-+#define MCF_PCIIW2BTAR_WTA2(x) (((x)&0x000000FF)<<8)
-+#define MCF_PCIIW2BTAR_WAM2(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCIIW2BTAR_WBA2(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIIWCR */
-+#define MCF_PCIIWCR_WINCTRL2(x) (((x)&0x0000000F)<<8)
-+#define MCF_PCIIWCR_WINCTRL1(x) (((x)&0x0000000F)<<16)
-+#define MCF_PCIIWCR_WINCTRL0(x) (((x)&0x0000000F)<<24)
-+#define MCF_PCIIWCR_WINCTRL0_MEMREAD (0x01000000)
-+#define MCF_PCIIWCR_WINCTRL0_MEMRDLINE (0x03000000)
-+#define MCF_PCIIWCR_WINCTRL0_MEMRDMUL (0x05000000)
-+#define MCF_PCIIWCR_WINCTRL0_IO (0x09000000)
-+#define MCF_PCIIWCR_WINCTRL0_E (0x01000000)
-+#define MCF_PCIIWCR_WINCTRL1_MEMREAD (0x00010000)
-+#define MCF_PCIIWCR_WINCTRL1_MEMRDLINE (0x00030000)
-+#define MCF_PCIIWCR_WINCTRL1_MEMRDMUL (0x00050000)
-+#define MCF_PCIIWCR_WINCTRL1_IO (0x00090000)
-+#define MCF_PCIIWCR_WINCTRL1_E (0x00010000)
-+#define MCF_PCIIWCR_WINCTRL2_MEMREAD (0x00000100)
-+#define MCF_PCIIWCR_WINCTRL2_MEMRDLINE (0x00000300)
-+#define MCF_PCIIWCR_WINCTRL2_MEMRDMUL (0x00000500)
-+#define MCF_PCIIWCR_WINCTRL2_IO (0x00000900)
-+#define MCF_PCIIWCR_WINCTRL2_E (0x00000100)
-+
-+
-+/* Bit definitions and macros for MCF_PCIICR */
-+#define MCF_PCIICR_MAXRETRY(x) (((x)&0x000000FF)<<0)
-+#define MCF_PCIICR_TAE (0x01000000)
-+#define MCF_PCIICR_IAE (0x02000000)
-+#define MCF_PCIICR_REE (0x04000000)
-+
-+/* Bit definitions and macros for MCF_PCIISR */
-+#define MCF_PCIISR_TA (0x01000000)
-+#define MCF_PCIISR_IA (0x02000000)
-+#define MCF_PCIISR_RE (0x04000000)
-+
-+/* Bit definitions and macros for MCF_PCICAR */
-+#define MCF_PCICAR_DWORD(x) (((x)&0x0000003F)<<2)
-+#define MCF_PCICAR_FUNCNUM(x) (((x)&0x00000007)<<8)
-+#define MCF_PCICAR_DEVNUM(x) (((x)&0x0000001F)<<11)
-+#define MCF_PCICAR_BUSNUM(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCICAR_E (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCITPSR */
-+#define MCF_PCITPSR_PKTSIZE(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCITTCR */
-+#define MCF_PCITTCR_DI (0x00000001)
-+#define MCF_PCITTCR_W (0x00000010)
-+#define MCF_PCITTCR_MAXBEATS(x) (((x)&0x00000007)<<8)
-+#define MCF_PCITTCR_MAXRETRY(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCITTCR_PCICMD(x) (((x)&0x0000000F)<<24)
-+
-+/* Bit definitions and macros for MCF_PCITER */
-+#define MCF_PCITER_NE (0x00010000)
-+#define MCF_PCITER_IAE (0x00020000)
-+#define MCF_PCITER_TAE (0x00040000)
-+#define MCF_PCITER_RE (0x00080000)
-+#define MCF_PCITER_SE (0x00100000)
-+#define MCF_PCITER_FEE (0x00200000)
-+#define MCF_PCITER_ME (0x01000000)
-+#define MCF_PCITER_BE (0x08000000)
-+#define MCF_PCITER_CM (0x10000000)
-+#define MCF_PCITER_RF (0x40000000)
-+#define MCF_PCITER_RC (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCITDCR */
-+#define MCF_PCITDCR_PKTSDONE(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_PCITDCR_BYTESDONE(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCITSR */
-+#define MCF_PCITSR_IA (0x00010000)
-+#define MCF_PCITSR_TA (0x00020000)
-+#define MCF_PCITSR_RE (0x00040000)
-+#define MCF_PCITSR_SE (0x00080000)
-+#define MCF_PCITSR_FE (0x00100000)
-+#define MCF_PCITSR_BE1 (0x00200000)
-+#define MCF_PCITSR_BE2 (0x00400000)
-+#define MCF_PCITSR_BE3 (0x00800000)
-+#define MCF_PCITSR_NT (0x01000000)
-+
-+/* Bit definitions and macros for MCF_PCITFSR */
-+#define MCF_PCITFSR_EMT (0x00010000)
-+#define MCF_PCITFSR_ALARM (0x00020000)
-+#define MCF_PCITFSR_FU (0x00040000)
-+#define MCF_PCITFSR_FR (0x00080000)
-+#define MCF_PCITFSR_OF (0x00100000)
-+#define MCF_PCITFSR_UF (0x00200000)
-+#define MCF_PCITFSR_RXW (0x00400000)
-+
-+/* Bit definitions and macros for MCF_PCITFCR */
-+#define MCF_PCITFCR_OF_MSK (0x00080000)
-+#define MCF_PCITFCR_UF_MSK (0x00100000)
-+#define MCF_PCITFCR_RXW_MSK (0x00200000)
-+#define MCF_PCITFCR_FAE_MSK (0x00400000)
-+#define MCF_PCITFCR_IP_MSK (0x00800000)
-+#define MCF_PCITFCR_GR(x) (((x)&0x00000007)<<24)
-+
-+/* Bit definitions and macros for MCF_PCITFAR */
-+#define MCF_PCITFAR_ALARM(x) (((x)&0x0000007F)<<0)
-+
-+/* Bit definitions and macros for MCF_PCITFRPR */
-+#define MCF_PCITFRPR_READ(x) (((x)&0x00000FFF)<<0)
-+
-+/* Bit definitions and macros for MCF_PCITFWPR */
-+#define MCF_PCITFWPR_WRITE(x) (((x)&0x00000FFF)<<0)
-+
-+/* Bit definitions and macros for MCF_PCIRPSR */
-+#define MCF_PCIRPSR_PKTSIZE(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCIRTCR */
-+#define MCF_PCIRTCR_DI (0x00000001)
-+#define MCF_PCIRTCR_W (0x00000010)
-+#define MCF_PCIRTCR_MAXBEATS(x) (((x)&0x00000007)<<8)
-+#define MCF_PCIRTCR_FB (0x00001000)
-+#define MCF_PCIRTCR_MAXRETRY(x) (((x)&0x000000FF)<<16)
-+#define MCF_PCIRTCR_PCICMD(x) (((x)&0x0000000F)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIRER */
-+#define MCF_PCIRER_NE (0x00010000)
-+#define MCF_PCIRER_IAE (0x00020000)
-+#define MCF_PCIRER_TAE (0x00040000)
-+#define MCF_PCIRER_RE (0x00080000)
-+#define MCF_PCIRER_SE (0x00100000)
-+#define MCF_PCIRER_FEE (0x00200000)
-+#define MCF_PCIRER_ME (0x01000000)
-+#define MCF_PCIRER_BE (0x08000000)
-+#define MCF_PCIRER_CM (0x10000000)
-+#define MCF_PCIRER_FE (0x20000000)
-+#define MCF_PCIRER_RF (0x40000000)
-+#define MCF_PCIRER_RC (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCIRDCR */
-+#define MCF_PCIRDCR_PKTSDONE(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_PCIRDCR_BYTESDONE(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCIRSR */
-+#define MCF_PCIRSR_IA (0x00010000)
-+#define MCF_PCIRSR_TA (0x00020000)
-+#define MCF_PCIRSR_RE (0x00040000)
-+#define MCF_PCIRSR_SE (0x00080000)
-+#define MCF_PCIRSR_FE (0x00100000)
-+#define MCF_PCIRSR_BE1 (0x00200000)
-+#define MCF_PCIRSR_BE2 (0x00400000)
-+#define MCF_PCIRSR_BE3 (0x00800000)
-+#define MCF_PCIRSR_NT (0x01000000)
-+
-+/* Bit definitions and macros for MCF_PCIRFSR */
-+#define MCF_PCIRFSR_EMT (0x00010000)
-+#define MCF_PCIRFSR_ALARM (0x00020000)
-+#define MCF_PCIRFSR_FU (0x00040000)
-+#define MCF_PCIRFSR_FR (0x00080000)
-+#define MCF_PCIRFSR_OF (0x00100000)
-+#define MCF_PCIRFSR_UF (0x00200000)
-+#define MCF_PCIRFSR_RXW (0x00400000)
-+
-+/* Bit definitions and macros for MCF_PCIRFCR */
-+#define MCF_PCIRFCR_OF_MSK (0x00080000)
-+#define MCF_PCIRFCR_UF_MSK (0x00100000)
-+#define MCF_PCIRFCR_RXW_MSK (0x00200000)
-+#define MCF_PCIRFCR_FAE_MSK (0x00400000)
-+#define MCF_PCIRFCR_IP_MSK (0x00800000)
-+#define MCF_PCIRFCR_GR(x) (((x)&0x00000007)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIRFAR */
-+#define MCF_PCIRFAR_ALARM(x) (((x)&0x0000007F)<<0)
-+
-+/* Bit definitions and macros for MCF_PCIRFRPR */
-+#define MCF_PCIRFRPR_READ(x) (((x)&0x00000FFF)<<0)
-+
-+/* Bit definitions and macros for MCF_PCIRFWPR */
-+#define MCF_PCIRFWPR_WRITE(x) (((x)&0x00000FFF)<<0)
-+
-+
-+/* Bit definitions and macros for MCF_PCIARB_PACR */
-+#define MCF_PCIARB_PACR_INTMPRI (0x00000001)
-+#define MCF_PCIARB_PACR_EXTMPRI(x) (((x)&0x0000001F)<<1)
-+#define MCF_PCIARB_PACR_INTMINTEN (0x00010000)
-+#define MCF_PCIARB_PACR_EXTMINTEN(x) (((x)&0x0000001F)<<17)
-+#define MCF_PCIARB_PACR_PKMD (0x40000000)
-+#define MCF_PCIARB_PACR_DS (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCIARB_PASR */
-+#define MCF_PCIARB_PASR_ITLMBK (0x00010000)
-+#define MCF_PCIARB_PASR_EXTMBK(x) (((x)&0x0000001F)<<17)
-+
-+#endif /* __MCF548X_PCI_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485psc.h
-@@ -0,0 +1,475 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * File: mcf548x_psc.h
-+ * Purpose: Register and bit definitions for the MCF548X
-+ *
-+ * Notes
-+ *
-+ */
-+
-+#ifndef __MCF548X_PSC_H__
-+#define __MCF548X_PSC_H__
-+
-+/*********************************************************************
-+*
-+* Programmable Serial Controller (PSC)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_PSC_MR0 MCF_REG08(0x008600)
-+#define MCF_PSC_SR0 MCF_REG16(0x008604)
-+#define MCF_PSC_CSR0 MCF_REG08(0x008604)
-+#define MCF_PSC_CR0 MCF_REG08(0x008608)
-+#define MCF_PSC_RB0 MCF_REG32(0x00860C)
-+#define MCF_PSC_TB0 MCF_REG32(0x00860C)
-+#define MCF_PSC_TB_8BIT0 MCF_REG32(0x00860C)
-+#define MCF_PSC_TB_16BIT0 MCF_REG32(0x00860C)
-+#define MCF_PSC_TB_AC970 MCF_REG32(0x00860C)
-+#define MCF_PSC_IPCR0 MCF_REG08(0x008610)
-+#define MCF_PSC_ACR0 MCF_REG08(0x008610)
-+#define MCF_PSC_ISR0 MCF_REG16(0x008614)
-+#define MCF_PSC_IMR0 MCF_REG16(0x008614)
-+#define MCF_PSC_CTUR0 MCF_REG08(0x008618)
-+#define MCF_PSC_CTLR0 MCF_REG08(0x00861C)
-+#define MCF_PSC_IP0 MCF_REG08(0x008634)
-+#define MCF_PSC_OPSET0 MCF_REG08(0x008638)
-+#define MCF_PSC_OPRESET0 MCF_REG08(0x00863C)
-+#define MCF_PSC_SICR0 MCF_REG08(0x008640)
-+#define MCF_PSC_IRCR10 MCF_REG08(0x008644)
-+#define MCF_PSC_IRCR20 MCF_REG08(0x008648)
-+#define MCF_PSC_IRSDR0 MCF_REG08(0x00864C)
-+#define MCF_PSC_IRMDR0 MCF_REG08(0x008650)
-+#define MCF_PSC_IRFDR0 MCF_REG08(0x008654)
-+#define MCF_PSC_RFCNT0 MCF_REG16(0x008658)
-+#define MCF_PSC_TFCNT0 MCF_REG16(0x00865C)
-+#define MCF_PSC_RFSR0 MCF_REG16(0x008664)
-+#define MCF_PSC_TFSR0 MCF_REG16(0x008684)
-+#define MCF_PSC_RFCR0 MCF_REG32(0x008668)
-+#define MCF_PSC_TFCR0 MCF_REG32(0x008688)
-+#define MCF_PSC_RFAR0 MCF_REG16(0x00866E)
-+#define MCF_PSC_TFAR0 MCF_REG16(0x00868E)
-+#define MCF_PSC_RFRP0 MCF_REG16(0x008672)
-+#define MCF_PSC_TFRP0 MCF_REG16(0x008692)
-+#define MCF_PSC_RFWP0 MCF_REG16(0x008676)
-+#define MCF_PSC_TFWP0 MCF_REG16(0x008696)
-+#define MCF_PSC_RLRFP0 MCF_REG16(0x00867A)
-+#define MCF_PSC_TLRFP0 MCF_REG16(0x00869A)
-+#define MCF_PSC_RLWFP0 MCF_REG16(0x00867E)
-+#define MCF_PSC_TLWFP0 MCF_REG16(0x00869E)
-+#define MCF_PSC_MR1 MCF_REG08(0x008700)
-+#define MCF_PSC_SR1 MCF_REG16(0x008704)
-+#define MCF_PSC_CSR1 MCF_REG08(0x008704)
-+#define MCF_PSC_CR1 MCF_REG08(0x008708)
-+#define MCF_PSC_RB1 MCF_REG32(0x00870C)
-+#define MCF_PSC_TB1 MCF_REG32(0x00870C)
-+#define MCF_PSC_TB_8BIT1 MCF_REG32(0x00870C)
-+#define MCF_PSC_TB_16BIT1 MCF_REG32(0x00870C)
-+#define MCF_PSC_TB_AC971 MCF_REG32(0x00870C)
-+#define MCF_PSC_IPCR1 MCF_REG08(0x008710)
-+#define MCF_PSC_ACR1 MCF_REG08(0x008710)
-+#define MCF_PSC_ISR1 MCF_REG16(0x008714)
-+#define MCF_PSC_IMR1 MCF_REG16(0x008714)
-+#define MCF_PSC_CTUR1 MCF_REG08(0x008718)
-+#define MCF_PSC_CTLR1 MCF_REG08(0x00871C)
-+#define MCF_PSC_IP1 MCF_REG08(0x008734)
-+#define MCF_PSC_OPSET1 MCF_REG08(0x008738)
-+#define MCF_PSC_OPRESET1 MCF_REG08(0x00873C)
-+#define MCF_PSC_SICR1 MCF_REG08(0x008740)
-+#define MCF_PSC_IRCR11 MCF_REG08(0x008744)
-+#define MCF_PSC_IRCR21 MCF_REG08(0x008748)
-+#define MCF_PSC_IRSDR1 MCF_REG08(0x00874C)
-+#define MCF_PSC_IRMDR1 MCF_REG08(0x008750)
-+#define MCF_PSC_IRFDR1 MCF_REG08(0x008754)
-+#define MCF_PSC_RFCNT1 MCF_REG16(0x008758)
-+#define MCF_PSC_TFCNT1 MCF_REG16(0x00875C)
-+#define MCF_PSC_RFSR1 MCF_REG16(0x008764)
-+#define MCF_PSC_TFSR1 MCF_REG16(0x008784)
-+#define MCF_PSC_RFCR1 MCF_REG32(0x008768)
-+#define MCF_PSC_TFCR1 MCF_REG32(0x008788)
-+#define MCF_PSC_RFAR1 MCF_REG16(0x00876E)
-+#define MCF_PSC_TFAR1 MCF_REG16(0x00878E)
-+#define MCF_PSC_RFRP1 MCF_REG16(0x008772)
-+#define MCF_PSC_TFRP1 MCF_REG16(0x008792)
-+#define MCF_PSC_RFWP1 MCF_REG16(0x008776)
-+#define MCF_PSC_TFWP1 MCF_REG16(0x008796)
-+#define MCF_PSC_RLRFP1 MCF_REG16(0x00877A)
-+#define MCF_PSC_TLRFP1 MCF_REG16(0x00879A)
-+#define MCF_PSC_RLWFP1 MCF_REG16(0x00877E)
-+#define MCF_PSC_TLWFP1 MCF_REG16(0x00879E)
-+#define MCF_PSC_MR2 MCF_REG08(0x008800)
-+#define MCF_PSC_SR2 MCF_REG16(0x008804)
-+#define MCF_PSC_CSR2 MCF_REG08(0x008804)
-+#define MCF_PSC_CR2 MCF_REG08(0x008808)
-+#define MCF_PSC_RB2 MCF_REG32(0x00880C)
-+#define MCF_PSC_TB2 MCF_REG32(0x00880C)
-+#define MCF_PSC_TB_8BIT2 MCF_REG32(0x00880C)
-+#define MCF_PSC_TB_16BIT2 MCF_REG32(0x00880C)
-+#define MCF_PSC_TB_AC972 MCF_REG32(0x00880C)
-+#define MCF_PSC_IPCR2 MCF_REG08(0x008810)
-+#define MCF_PSC_ACR2 MCF_REG08(0x008810)
-+#define MCF_PSC_ISR2 MCF_REG16(0x008814)
-+#define MCF_PSC_IMR2 MCF_REG16(0x008814)
-+#define MCF_PSC_CTUR2 MCF_REG08(0x008818)
-+#define MCF_PSC_CTLR2 MCF_REG08(0x00881C)
-+#define MCF_PSC_IP2 MCF_REG08(0x008834)
-+#define MCF_PSC_OPSET2 MCF_REG08(0x008838)
-+#define MCF_PSC_OPRESET2 MCF_REG08(0x00883C)
-+#define MCF_PSC_SICR2 MCF_REG08(0x008840)
-+#define MCF_PSC_IRCR12 MCF_REG08(0x008844)
-+#define MCF_PSC_IRCR22 MCF_REG08(0x008848)
-+#define MCF_PSC_IRSDR2 MCF_REG08(0x00884C)
-+#define MCF_PSC_IRMDR2 MCF_REG08(0x008850)
-+#define MCF_PSC_IRFDR2 MCF_REG08(0x008854)
-+#define MCF_PSC_RFCNT2 MCF_REG16(0x008858)
-+#define MCF_PSC_TFCNT2 MCF_REG16(0x00885C)
-+#define MCF_PSC_RFSR2 MCF_REG16(0x008864)
-+#define MCF_PSC_TFSR2 MCF_REG16(0x008884)
-+#define MCF_PSC_RFCR2 MCF_REG32(0x008868)
-+#define MCF_PSC_TFCR2 MCF_REG32(0x008888)
-+#define MCF_PSC_RFAR2 MCF_REG16(0x00886E)
-+#define MCF_PSC_TFAR2 MCF_REG16(0x00888E)
-+#define MCF_PSC_RFRP2 MCF_REG16(0x008872)
-+#define MCF_PSC_TFRP2 MCF_REG16(0x008892)
-+#define MCF_PSC_RFWP2 MCF_REG16(0x008876)
-+#define MCF_PSC_TFWP2 MCF_REG16(0x008896)
-+#define MCF_PSC_RLRFP2 MCF_REG16(0x00887A)
-+#define MCF_PSC_TLRFP2 MCF_REG16(0x00889A)
-+#define MCF_PSC_RLWFP2 MCF_REG16(0x00887E)
-+#define MCF_PSC_TLWFP2 MCF_REG16(0x00889E)
-+#define MCF_PSC_MR3 MCF_REG08(0x008900)
-+#define MCF_PSC_SR3 MCF_REG16(0x008904)
-+#define MCF_PSC_CSR3 MCF_REG08(0x008904)
-+#define MCF_PSC_CR3 MCF_REG08(0x008908)
-+#define MCF_PSC_RB3 MCF_REG32(0x00890C)
-+#define MCF_PSC_TB3 MCF_REG32(0x00890C)
-+#define MCF_PSC_TB_8BIT3 MCF_REG32(0x00890C)
-+#define MCF_PSC_TB_16BIT3 MCF_REG32(0x00890C)
-+#define MCF_PSC_TB_AC973 MCF_REG32(0x00890C)
-+#define MCF_PSC_IPCR3 MCF_REG08(0x008910)
-+#define MCF_PSC_ACR3 MCF_REG08(0x008910)
-+#define MCF_PSC_ISR3 MCF_REG16(0x008914)
-+#define MCF_PSC_IMR3 MCF_REG16(0x008914)
-+#define MCF_PSC_CTUR3 MCF_REG08(0x008918)
-+#define MCF_PSC_CTLR3 MCF_REG08(0x00891C)
-+#define MCF_PSC_IP3 MCF_REG08(0x008934)
-+#define MCF_PSC_OPSET3 MCF_REG08(0x008938)
-+#define MCF_PSC_OPRESET3 MCF_REG08(0x00893C)
-+#define MCF_PSC_SICR3 MCF_REG08(0x008940)
-+#define MCF_PSC_IRCR13 MCF_REG08(0x008944)
-+#define MCF_PSC_IRCR23 MCF_REG08(0x008948)
-+#define MCF_PSC_IRSDR3 MCF_REG08(0x00894C)
-+#define MCF_PSC_IRMDR3 MCF_REG08(0x008950)
-+#define MCF_PSC_IRFDR3 MCF_REG08(0x008954)
-+#define MCF_PSC_RFCNT3 MCF_REG16(0x008958)
-+#define MCF_PSC_TFCNT3 MCF_REG16(0x00895C)
-+#define MCF_PSC_RFSR3 MCF_REG16(0x008964)
-+#define MCF_PSC_TFSR3 MCF_REG16(0x008984)
-+#define MCF_PSC_RFCR3 MCF_REG32(0x008968)
-+#define MCF_PSC_TFCR3 MCF_REG32(0x008988)
-+#define MCF_PSC_RFAR3 MCF_REG16(0x00896E)
-+#define MCF_PSC_TFAR3 MCF_REG16(0x00898E)
-+#define MCF_PSC_RFRP3 MCF_REG16(0x008972)
-+#define MCF_PSC_TFRP3 MCF_REG16(0x008992)
-+#define MCF_PSC_RFWP3 MCF_REG16(0x008976)
-+#define MCF_PSC_TFWP3 MCF_REG16(0x008996)
-+#define MCF_PSC_RLRFP3 MCF_REG16(0x00897A)
-+#define MCF_PSC_TLRFP3 MCF_REG16(0x00899A)
-+#define MCF_PSC_RLWFP3 MCF_REG16(0x00897E)
-+#define MCF_PSC_TLWFP3 MCF_REG16(0x00899E)
-+#define MCF_PSC_MR(x) MCF_REG08(0x008600+((x)*0x100))
-+#define MCF_PSC_SR(x) MCF_REG16(0x008604+((x)*0x100))
-+#define MCF_PSC_CSR(x) MCF_REG08(0x008604+((x)*0x100))
-+#define MCF_PSC_CR(x) MCF_REG08(0x008608+((x)*0x100))
-+#define MCF_PSC_RB(x) MCF_REG32(0x00860C+((x)*0x100))
-+#define MCF_PSC_TB(x) MCF_REG32(0x00860C+((x)*0x100))
-+#define MCF_PSC_TB_8BIT(x) MCF_REG32(0x00860C+((x)*0x100))
-+#define MCF_PSC_TB_16BIT(x) MCF_REG32(0x00860C+((x)*0x100))
-+#define MCF_PSC_TB_AC97(x) MCF_REG32(0x00860C+((x)*0x100))
-+#define MCF_PSC_IPCR(x) MCF_REG08(0x008610+((x)*0x100))
-+#define MCF_PSC_ACR(x) MCF_REG08(0x008610+((x)*0x100))
-+#define MCF_PSC_ISR(x) MCF_REG16(0x008614+((x)*0x100))
-+#define MCF_PSC_IMR(x) MCF_REG16(0x008614+((x)*0x100))
-+#define MCF_PSC_CTUR(x) MCF_REG08(0x008618+((x)*0x100))
-+#define MCF_PSC_CTLR(x) MCF_REG08(0x00861C+((x)*0x100))
-+#define MCF_PSC_IP(x) MCF_REG08(0x008634+((x)*0x100))
-+#define MCF_PSC_OPSET(x) MCF_REG08(0x008638+((x)*0x100))
-+#define MCF_PSC_OPRESET(x) MCF_REG08(0x00863C+((x)*0x100))
-+#define MCF_PSC_SICR(x) MCF_REG08(0x008640+((x)*0x100))
-+#define MCF_PSC_IRCR1(x) MCF_REG08(0x008644+((x)*0x100))
-+#define MCF_PSC_IRCR2(x) MCF_REG08(0x008648+((x)*0x100))
-+#define MCF_PSC_IRSDR(x) MCF_REG08(0x00864C+((x)*0x100))
-+#define MCF_PSC_IRMDR(x) MCF_REG08(0x008650+((x)*0x100))
-+#define MCF_PSC_IRFDR(x) MCF_REG08(0x008654+((x)*0x100))
-+#define MCF_PSC_RFCNT(x) MCF_REG16(0x008658+((x)*0x100))
-+#define MCF_PSC_TFCNT(x) MCF_REG16(0x00865C+((x)*0x100))
-+#define MCF_PSC_RFSR(x) MCF_REG16(0x008664+((x)*0x100))
-+#define MCF_PSC_TFSR(x) MCF_REG16(0x008684+((x)*0x100))
-+#define MCF_PSC_RFCR(x) MCF_REG32(0x008668+((x)*0x100))
-+#define MCF_PSC_TFCR(x) MCF_REG32(0x008688+((x)*0x100))
-+#define MCF_PSC_RFAR(x) MCF_REG16((0x00866E)+((x)*0x100))
-+#define MCF_PSC_TFAR(x) MCF_REG16((0x00868E)+((x)*0x100))
-+#define MCF_PSC_RFRP(x) MCF_REG16(0x008672+((x)*0x100))
-+#define MCF_PSC_TFRP(x) MCF_REG16(0x008692+((x)*0x100))
-+#define MCF_PSC_RFWP(x) MCF_REG16(0x008676+((x)*0x100))
-+#define MCF_PSC_TFWP(x) MCF_REG16(0x008696+((x)*0x100))
-+#define MCF_PSC_RLRFP(x) MCF_REG16(0x00867A+((x)*0x100))
-+#define MCF_PSC_TLRFP(x) MCF_REG16(0x00869A+((x)*0x100))
-+#define MCF_PSC_RLWFP(x) MCF_REG16(0x00867E+((x)*0x100))
-+#define MCF_PSC_TLWFP(x) MCF_REG16(0x00869E+((x)*0x100))
-+
-+/* Bit definitions and macros for MCF_PSC_MR */
-+#define MCF_PSC_MR_BC(x) (((x)&0x03)<<0)
-+#define MCF_PSC_MR_PT (0x04)
-+#define MCF_PSC_MR_PM(x) (((x)&0x03)<<3)
-+#define MCF_PSC_MR_ERR (0x20)
-+#define MCF_PSC_MR_RXIRQ (0x40)
-+#define MCF_PSC_MR_RXRTS (0x80)
-+#define MCF_PSC_MR_SB(x) (((x)&0x0F)<<0)
-+#define MCF_PSC_MR_TXCTS (0x10)
-+#define MCF_PSC_MR_TXRTS (0x20)
-+#define MCF_PSC_MR_CM(x) (((x)&0x03)<<6)
-+#define MCF_PSC_MR_PM_MULTI_ADDR (0x1C)
-+#define MCF_PSC_MR_PM_MULTI_DATA (0x18)
-+#define MCF_PSC_MR_PM_NONE (0x10)
-+#define MCF_PSC_MR_PM_FORCE_HI (0x0C)
-+#define MCF_PSC_MR_PM_FORCE_LO (0x08)
-+#define MCF_PSC_MR_PM_ODD (0x04)
-+#define MCF_PSC_MR_PM_EVEN (0x00)
-+#define MCF_PSC_MR_BC_5 (0x00)
-+#define MCF_PSC_MR_BC_6 (0x01)
-+#define MCF_PSC_MR_BC_7 (0x02)
-+#define MCF_PSC_MR_BC_8 (0x03)
-+#define MCF_PSC_MR_CM_NORMAL (0x00)
-+#define MCF_PSC_MR_CM_ECHO (0x40)
-+#define MCF_PSC_MR_CM_LOCAL_LOOP (0x80)
-+#define MCF_PSC_MR_CM_REMOTE_LOOP (0xC0)
-+#define MCF_PSC_MR_SB_STOP_BITS_1 (0x07)
-+#define MCF_PSC_MR_SB_STOP_BITS_15 (0x08)
-+#define MCF_PSC_MR_SB_STOP_BITS_2 (0x0F)
-+
-+/* Bit definitions and macros for MCF_PSC_SR */
-+#define MCF_PSC_SR_ERR (0x0040)
-+#define MCF_PSC_SR_CDE_DEOF (0x0080)
-+#define MCF_PSC_SR_RXRDY (0x0100)
-+#define MCF_PSC_SR_FU (0x0200)
-+#define MCF_PSC_SR_TXRDY (0x0400)
-+#define MCF_PSC_SR_TXEMP_URERR (0x0800)
-+#define MCF_PSC_SR_OE (0x1000)
-+#define MCF_PSC_SR_PE_CRCERR (0x2000)
-+#define MCF_PSC_SR_FE_PHYERR (0x4000)
-+#define MCF_PSC_SR_RB_NEOF (0x8000)
-+
-+/* Bit definitions and macros for MCF_PSC_CSR */
-+#define MCF_PSC_CSR_TCSEL(x) (((x)&0x0F)<<0)
-+#define MCF_PSC_CSR_RCSEL(x) (((x)&0x0F)<<4)
-+#define MCF_PSC_CSR_RCSEL_SYS_CLK (0xD0)
-+#define MCF_PSC_CSR_RCSEL_CTM16 (0xE0)
-+#define MCF_PSC_CSR_RCSEL_CTM (0xF0)
-+#define MCF_PSC_CSR_TCSEL_SYS_CLK (0x0D)
-+#define MCF_PSC_CSR_TCSEL_CTM16 (0x0E)
-+#define MCF_PSC_CSR_TCSEL_CTM (0x0F)
-+
-+/* Bit definitions and macros for MCF_PSC_CR */
-+#define MCF_PSC_CR_RXC(x) (((x)&0x03)<<0)
-+#define MCF_PSC_CR_TXC(x) (((x)&0x03)<<2)
-+#define MCF_PSC_CR_MISC(x) (((x)&0x07)<<4)
-+#define MCF_PSC_CR_NONE (0x00)
-+#define MCF_PSC_CR_STOP_BREAK (0x70)
-+#define MCF_PSC_CR_START_BREAK (0x60)
-+#define MCF_PSC_CR_BKCHGINT (0x50)
-+#define MCF_PSC_CR_RESET_ERROR (0x40)
-+#define MCF_PSC_CR_RESET_TX (0x30)
-+#define MCF_PSC_CR_RESET_RX (0x20)
-+#define MCF_PSC_CR_RESET_MR (0x10)
-+#define MCF_PSC_CR_TX_DISABLED (0x08)
-+#define MCF_PSC_CR_TX_ENABLED (0x04)
-+#define MCF_PSC_CR_RX_DISABLED (0x02)
-+#define MCF_PSC_CR_RX_ENABLED (0x01)
-+
-+/* Bit definitions and macros for MCF_PSC_TB_8BIT */
-+#define MCF_PSC_TB_8BIT_TB3(x) (((x)&0x000000FF)<<0)
-+#define MCF_PSC_TB_8BIT_TB2(x) (((x)&0x000000FF)<<8)
-+#define MCF_PSC_TB_8BIT_TB1(x) (((x)&0x000000FF)<<16)
-+#define MCF_PSC_TB_8BIT_TB0(x) (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PSC_TB_16BIT */
-+#define MCF_PSC_TB_16BIT_TB1(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_PSC_TB_16BIT_TB0(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PSC_TB_AC97 */
-+#define MCF_PSC_TB_AC97_SOF (0x00000800)
-+#define MCF_PSC_TB_AC97_TB(x) (((x)&0x000FFFFF)<<12)
-+
-+/* Bit definitions and macros for MCF_PSC_IPCR */
-+#define MCF_PSC_IPCR_RESERVED (0x0C)
-+#define MCF_PSC_IPCR_CTS (0x0D)
-+#define MCF_PSC_IPCR_D_CTS (0x1C)
-+#define MCF_PSC_IPCR_SYNC (0x8C)
-+
-+/* Bit definitions and macros for MCF_PSC_ACR */
-+#define MCF_PSC_ACR_IEC0 (0x01)
-+#define MCF_PSC_ACR_CTMS(x) (((x)&0x07)<<4)
-+#define MCF_PSC_ACR_BRG (0x80)
-+
-+/* Bit definitions and macros for MCF_PSC_ISR */
-+#define MCF_PSC_ISR_ERR (0x0040)
-+#define MCF_PSC_ISR_DEOF (0x0080)
-+#define MCF_PSC_ISR_TXRDY (0x0100)
-+#define MCF_PSC_ISR_RXRDY_FU (0x0200)
-+#define MCF_PSC_ISR_DB (0x0400)
-+#define MCF_PSC_ISR_IPC (0x8000)
-+
-+/* Bit definitions and macros for MCF_PSC_IMR */
-+#define MCF_PSC_IMR_ERR (0x0040)
-+#define MCF_PSC_IMR_DEOF (0x0080)
-+#define MCF_PSC_IMR_TXRDY (0x0100)
-+#define MCF_PSC_IMR_RXRDY_FU (0x0200)
-+#define MCF_PSC_IMR_DB (0x0400)
-+#define MCF_PSC_IMR_IPC (0x8000)
-+
-+/* Bit definitions and macros for MCF_PSC_IP */
-+#define MCF_PSC_IP_CTS (0x01)
-+#define MCF_PSC_IP_TGL (0x40)
-+#define MCF_PSC_IP_LWPR_B (0x80)
-+
-+/* Bit definitions and macros for MCF_PSC_OPSET */
-+#define MCF_PSC_OPSET_RTS (0x01)
-+
-+/* Bit definitions and macros for MCF_PSC_OPRESET */
-+#define MCF_PSC_OPRESET_RTS (0x01)
-+
-+/* Bit definitions and macros for MCF_PSC_SICR */
-+#define MCF_PSC_SICR_SIM(x) (((x)&0x07)<<0)
-+#define MCF_PSC_SICR_SHDIR (0x10)
-+#define MCF_PSC_SICR_DTS (0x20)
-+#define MCF_PSC_SICR_AWR (0x40)
-+#define MCF_PSC_SICR_ACRB (0x80)
-+#define MCF_PSC_SICR_SIM_UART (0x00)
-+#define MCF_PSC_SICR_SIM_MODEM8 (0x01)
-+#define MCF_PSC_SICR_SIM_MODEM16 (0x02)
-+#define MCF_PSC_SICR_SIM_AC97 (0x03)
-+#define MCF_PSC_SICR_SIM_SIR (0x04)
-+#define MCF_PSC_SICR_SIM_MIR (0x05)
-+#define MCF_PSC_SICR_SIM_FIR (0x06)
-+
-+/* Bit definitions and macros for MCF_PSC_IRCR1 */
-+#define MCF_PSC_IRCR1_SPUL (0x01)
-+#define MCF_PSC_IRCR1_SIPEN (0x02)
-+#define MCF_PSC_IRCR1_FD (0x04)
-+
-+/* Bit definitions and macros for MCF_PSC_IRCR2 */
-+#define MCF_PSC_IRCR2_NXTEOF (0x01)
-+#define MCF_PSC_IRCR2_ABORT (0x02)
-+#define MCF_PSC_IRCR2_SIPREQ (0x04)
-+
-+/* Bit definitions and macros for MCF_PSC_IRMDR */
-+#define MCF_PSC_IRMDR_M_FDIV(x) (((x)&0x7F)<<0)
-+#define MCF_PSC_IRMDR_FREQ (0x80)
-+
-+/* Bit definitions and macros for MCF_PSC_IRFDR */
-+#define MCF_PSC_IRFDR_F_FDIV(x) (((x)&0x0F)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RFCNT */
-+#define MCF_PSC_RFCNT_CNT(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TFCNT */
-+#define MCF_PSC_TFCNT_CNT(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RFSR */
-+#define MCF_PSC_RFSR_EMT (0x0001)
-+#define MCF_PSC_RFSR_ALARM (0x0002)
-+#define MCF_PSC_RFSR_FU (0x0004)
-+#define MCF_PSC_RFSR_FRMRY (0x0008)
-+#define MCF_PSC_RFSR_OF (0x0010)
-+#define MCF_PSC_RFSR_UF (0x0020)
-+#define MCF_PSC_RFSR_RXW (0x0040)
-+#define MCF_PSC_RFSR_FAE (0x0080)
-+#define MCF_PSC_RFSR_FRM(x) (((x)&0x000F)<<8)
-+#define MCF_PSC_RFSR_TAG (0x1000)
-+#define MCF_PSC_RFSR_TXW (0x4000)
-+#define MCF_PSC_RFSR_IP (0x8000)
-+#define MCF_PSC_RFSR_FRM_BYTE0 (0x0800)
-+#define MCF_PSC_RFSR_FRM_BYTE1 (0x0400)
-+#define MCF_PSC_RFSR_FRM_BYTE2 (0x0200)
-+#define MCF_PSC_RFSR_FRM_BYTE3 (0x0100)
-+
-+/* Bit definitions and macros for MCF_PSC_TFSR */
-+#define MCF_PSC_TFSR_EMT (0x0001)
-+#define MCF_PSC_TFSR_ALARM (0x0002)
-+#define MCF_PSC_TFSR_FU (0x0004)
-+#define MCF_PSC_TFSR_FRMRY (0x0008)
-+#define MCF_PSC_TFSR_OF (0x0010)
-+#define MCF_PSC_TFSR_UF (0x0020)
-+#define MCF_PSC_TFSR_RXW (0x0040)
-+#define MCF_PSC_TFSR_FAE (0x0080)
-+#define MCF_PSC_TFSR_FRM(x) (((x)&0x000F)<<8)
-+#define MCF_PSC_TFSR_TAG (0x1000)
-+#define MCF_PSC_TFSR_TXW (0x4000)
-+#define MCF_PSC_TFSR_IP (0x8000)
-+#define MCF_PSC_TFSR_FRM_BYTE0 (0x0800)
-+#define MCF_PSC_TFSR_FRM_BYTE1 (0x0400)
-+#define MCF_PSC_TFSR_FRM_BYTE2 (0x0200)
-+#define MCF_PSC_TFSR_FRM_BYTE3 (0x0100)
-+
-+/* Bit definitions and macros for MCF_PSC_RFCR */
-+#define MCF_PSC_RFCR_CNTR(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_PSC_RFCR_TXW_MSK (0x00040000)
-+#define MCF_PSC_RFCR_OF_MSK (0x00080000)
-+#define MCF_PSC_RFCR_UF_MSK (0x00100000)
-+#define MCF_PSC_RFCR_RXW_MSK (0x00200000)
-+#define MCF_PSC_RFCR_FAE_MSK (0x00400000)
-+#define MCF_PSC_RFCR_IP_MSK (0x00800000)
-+#define MCF_PSC_RFCR_GR(x) (((x)&0x00000007)<<24)
-+#define MCF_PSC_RFCR_FRMEN (0x08000000)
-+#define MCF_PSC_RFCR_TIMER (0x10000000)
-+#define MCF_PSC_RFCR_WRITETAG (0x20000000)
-+#define MCF_PSC_RFCR_SHADOW (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PSC_TFCR */
-+#define MCF_PSC_TFCR_CNTR(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_PSC_TFCR_TXW_MSK (0x00040000)
-+#define MCF_PSC_TFCR_OF_MSK (0x00080000)
-+#define MCF_PSC_TFCR_UF_MSK (0x00100000)
-+#define MCF_PSC_TFCR_RXW_MSK (0x00200000)
-+#define MCF_PSC_TFCR_FAE_MSK (0x00400000)
-+#define MCF_PSC_TFCR_IP_MSK (0x00800000)
-+#define MCF_PSC_TFCR_GR(x) (((x)&0x00000007)<<24)
-+#define MCF_PSC_TFCR_FRMEN (0x08000000)
-+#define MCF_PSC_TFCR_TIMER (0x10000000)
-+#define MCF_PSC_TFCR_WRITETAG (0x20000000)
-+#define MCF_PSC_TFCR_SHADOW (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PSC_RFAR */
-+#define MCF_PSC_RFAR_ALARM(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TFAR */
-+#define MCF_PSC_TFAR_ALARM(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RFRP */
-+#define MCF_PSC_RFRP_READ(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TFRP */
-+#define MCF_PSC_TFRP_READ(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RFWP */
-+#define MCF_PSC_RFWP_WRITE(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TFWP */
-+#define MCF_PSC_TFWP_WRITE(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RLRFP */
-+#define MCF_PSC_RLRFP_LFP(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TLRFP */
-+#define MCF_PSC_TLRFP_LFP(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RLWFP */
-+#define MCF_PSC_RLWFP_LFP(x) (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TLWFP */
-+#define MCF_PSC_TLWFP_LFP(x) (((x)&0x01FF)<<0)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF548X_PSC_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485sec.h
-@@ -0,0 +1,177 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+#ifndef M5485SEC_H
-+#define M5484SEC_H
-+
-+#define SEC_EUACR_U MCF_REG32(0x21000)
-+#define SEC_EUACR_L MCF_REG32(0x21004)
-+#define SEC_EUASR_U MCF_REG32(0x21028)
-+#define SEC_EUASR_L MCF_REG32(0x2102C)
-+#define SEC_SMCR MCF_REG32(0x21030)
-+#define SEC_SISR_U MCF_REG32(0x21010)
-+#define SEC_SISR_L MCF_REG32(0x21014)
-+#define SEC_SICR_U MCF_REG32(0x21018)
-+#define SEC_SICR_L MCF_REG32(0x2101C)
-+#define SEC_SIMR_U MCF_REG32(0x21008)
-+#define SEC_SIMR_L MCF_REG32(0x2100C)
-+#define SEC_SID MCF_REG32(0x21020)
-+
-+#define SEC_SMCR_RESET 0x01000000
-+#define SEC_SIMR_MASK_U 0x00000000
-+#define SEC_SIMR_MASK_L 0x03333340
-+
-+#define SEC_CC0_FR MCF_REG32(0x2204C)
-+#define SEC_CC0_CR MCF_REG32(0x2200C)
-+#define SEC_CC0_CDPR MCF_REG32(0x22044)
-+#define SEC_CC0_PSR_U MCF_REG32(0x22010)
-+#define SEC_CC0_PSR_L MCF_REG32(0x22014)
-+#define SEC_CC1_FR MCF_REG32(0x2304C)
-+#define SEC_CC1_CR MCF_REG32(0x2300C)
-+#define SEC_CC1_CDPR MCF_REG32(0x23044)
-+#define SEC_CC1_PSR_U MCF_REG32(0x23010)
-+#define SEC_CC1_PSR_L MCF_REG32(0x23014)
-+
-+#define SEC_CC_CR_RESET 0x00000001
-+#define SEC_CC_CR_CONFIGURATION 0x0000001E
-+#define SEC_CC_PSR_U_ERR_CH0 0x20000000
-+#define SEC_CC_PSR_U_ERR_CH1 0x80000000
-+#define SEC_CC_PSR_U_DN_CH0 0x10000000
-+#define SEC_CC_PSR_U_DN_CH1 0x40000000
-+
-+#define SEC_DEU_DRCR MCF_REG32(0x2A018)
-+#define SEC_DEU_DSR MCF_REG32(0x2A028)
-+#define SEC_DEU_DISR MCF_REG32(0x2A030)
-+#define SEC_DEU_DIMR MCF_REG32(0x2A038)
-+
-+#define SEC_DEU_DRCR_RESET 0x01000000
-+#define SEC_DEU_DSR_RD 0x01000000
-+#define SEC_DEU_DIMR_MASK 0xF63F0000
-+
-+#define SEC_AFEU_AFRCR MCF_REG32(0x28018)
-+#define SEC_AFEU_AFSR MCF_REG32(0x28028)
-+#define SEC_AFEU_AFISR MCF_REG32(0x28030)
-+#define SEC_AFEU_AFIMR MCF_REG32(0x28038)
-+
-+#define SEC_AFEU_AFRCR_RESET 0x01000000
-+#define SEC_AFEU_AFSR_RD 0x01000000
-+#define SEC_AFEU_AFIMR_MASK 0xF61F0000
-+
-+
-+#define SEC_MDEU_MDRCR MCF_REG32(0x2C018)
-+#define SEC_MDEU_MDSR MCF_REG32(0x2C028)
-+#define SEC_MDEU_MDISR MCF_REG32(0x2C030)
-+#define SEC_MDEU_MDIMR MCF_REG32(0x2C038)
-+
-+#define SEC_MDEU_MDRCR_RESET 0x01000000
-+#define SEC_MDEU_MDSR_RD 0x01000000
-+#define SEC_MDEU_MDIMR_MASK 0xC41F0000
-+
-+
-+#define SEC_RNG_RNGRCR MCF_REG32(0x2E018)
-+#define SEC_RNG_RNGSR MCF_REG32(0x2E028)
-+#define SEC_RNG_RNGISR MCF_REG32(0x2E030)
-+#define SEC_RNG_RNGIMR MCF_REG32(0x2E038)
-+
-+#define SEC_RNG_RNGRCR_RESET 0x01000000
-+#define SEC_RNG_RNGSR_RD 0x01000000
-+#define SEC_RNG_RNGIMR_MASK 0xC2100000
-+
-+#define SEC_AESU_AESRCR MCF_REG32(0x32018)
-+#define SEC_AESU_AESSR MCF_REG32(0x32028)
-+#define SEC_AESU_AESISR MCF_REG32(0x32030)
-+#define SEC_AESU_AESIMR MCF_REG32(0x32038)
-+
-+#define SEC_AESU_AESRCR_RESET 0x01000000
-+#define SEC_AESU_AESSR_RD 0x01000000
-+#define SEC_AESU_AESIMR_MASK 0xF61F0000
-+
-+
-+#define SEC_DESC_NUM 20
-+#define SEC_CHANNEL_NUMBER 2
-+#define SEC_MAX_BUF_SIZE (32 * 1024)
-+#define SEC_INIT_TIMEOUT (1 * HZ)
-+#define SEC_INTERRUPT 37
-+
-+/* Header descriptor values*/
-+#define SEC_ALG_ENCR_DES_ECB_SINGLE 0x20100010
-+#define SEC_ALG_DECR_DES_ECB_SINGLE 0x20000010
-+#define SEC_ALG_ENCR_DES_ECB_TRIPLE 0x20300010
-+#define SEC_ALG_DECR_DES_ECB_TRIPLE 0x20200010
-+#define SEC_ALG_ENCR_DES_CBC_SINGLE 0x20500010
-+#define SEC_ALG_DECR_DES_CBC_SINGLE 0x20400010
-+#define SEC_ALG_ENCR_DES_CBC_TRIPLE 0x20700010
-+#define SEC_ALG_DECR_DES_CBC_TRIPLE 0x20600010
-+
-+#define SEC_ALG_MDEU_SHA256 0x30500010
-+#define SEC_ALG_MDEU_MD5 0x30600010
-+#define SEC_ALG_MDEU_SHA 0x30400010
-+#define SEC_ALG_MDEU_SHA256_HMAC 0x31D00010
-+#define SEC_ALG_MDEU_MD5_HMAC 0x31E00010
-+#define SEC_ALG_MDEU_SHA_HMAC 0x31C00010
-+
-+#define SEC_ALG_RNG 0x40000010
-+
-+
-+#define SEC_ALG_AFEU_KEY 0x10200050
-+#define SEC_ALG_AFEU_CONTEXT 0x10700050
-+
-+#define SEC_ALG_ENCR_AESU_CBC 0x60300010
-+#define SEC_ALG_DECR_AESU_CBC 0x60200010
-+#define SEC_ALG_ENCR_AESU_ECB 0x60100010
-+#define SEC_ALG_DECR_AESU_ECB 0x60000010
-+#define SEC_ALG_AESU_CTR 0x60600010
-+
-+
-+
-+#define SEC_DESCHEAD_ERROR 0xFE000000
-+#define SEC_DESCHEAD_COMPLETED 0xFF000000
-+
-+#define SEC_DEVICE_NAME "cfsec"
-+
-+/*!!! This number must be changed*/
-+#define SEC_MAJOR 130
-+
-+#define SEC_DEV_BUF 1024
-+#define SEC_DEV_KEY_LEN 64
-+#define SEC_DEV_VECTOR_LEN 259
-+
-+#define SEC_AES_BLCK_LEN 16
-+#define SEC_DES_BLCK_LEN 8
-+
-+
-+/* Descriptor structure of SEC*/
-+struct sec_descriptor {
-+ volatile unsigned long secdesc_header;
-+ unsigned long secdesc_len1;
-+ void *secdesc_ptr1;
-+ unsigned long secdesc_iv_in_len;
-+ void *secdesc_iv_in_ptr;
-+ unsigned long secdesc_key_len;
-+ void *secdesc_key_ptr;
-+ unsigned long secdesc_data_in_len;
-+ void *secdesc_data_in_ptr;
-+ unsigned long secdesc_data_out_len;
-+ void *secdesc_data_out_ptr;
-+ unsigned long secdesc_iv_out_len;
-+ void *secdesc_iv_out_ptr;
-+ unsigned long secdesc_len7;
-+ void *secdesc_ptr7;
-+ void *secdesc_ptrnext;
-+};
-+
-+struct sec_device_data {
-+ unsigned char secdev_inbuf[SEC_DEV_BUF];
-+ unsigned char secdev_outbuf[SEC_DEV_BUF];
-+ unsigned char secdev_key[SEC_DEV_KEY_LEN];
-+ unsigned char secdev_iv[SEC_DEV_VECTOR_LEN];
-+ unsigned char secdev_ov[SEC_DEV_VECTOR_LEN];
-+ struct sec_descriptor *secdev_desc;
-+};
-+
-+struct sec_descriptor *sec_desc_alloc(void);
-+inline void sec_desc_free(struct sec_descriptor *desc);
-+int sec_execute(int channel, struct sec_descriptor *desc, int timeout);
-+int sec_nonblock_execute(struct sec_descriptor *desc);
-+#endif
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485sim.h
-@@ -0,0 +1,346 @@
-+/*
-+ * m5485sim.h -- ColdFire 547x/548x System Integration Unit support.
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+#ifndef m5485sim_h
-+#define m5485sim_h
-+/*
-+ * System Integration Unit Registers
-+ */
-+#define MCF_SDRAMDS MCF_REG32(0x000004)
-+/* SDRAM Drive Strength */
-+#define MCF_SBCR MCF_REG32(0x000010)
-+/* System Breakpoint Control */
-+#define MCF_CSnCFG(x) MCF_REG32(0x000020+(x*4))
-+/* SDRAM Chip Select X */
-+#define MCF_SECSACR MCF_REG32(0x000038)
-+/* Sequential Access Control */
-+#define MCF_RSR MCF_REG32(0x000044)
-+/* Reset Status */
-+#define MCF_JTAGID MCF_REG32(0x000050)
-+/* JTAG Device Identification */
-+#define MCF_XARB_PRIEN MCF_REG32(0x000264)
-+/* Arbiter master pri enable */
-+#define MCF_XARB_PRI MCF_REG32(0x000268)
-+/* Arbiter master pri levels */
-+#define MCF_SPCR MCF_REG32(0x000300)
-+
-+/*
-+ * FlexBus Chip Selects Registers
-+ */
-+#define MCF_CSARn(x) MCF_REG32(0x000500+(x*0xC))
-+#define MCF_CSMRn(x) MCF_REG32(0x000504+(x*0xC))
-+#define MCF_CSCRn(x) MCF_REG32(0x000508+(x*0xC))
-+
-+/*
-+ * Interrupt Controller Registers
-+ */
-+#define MCF_IPRH MCF_REG32(0x000700)
-+#define MCF_IPRL MCF_REG32(0x000704)
-+#define MCF_IMRH MCF_REG32(0x000708)
-+#define MCF_IMRL MCF_REG32(0x00070C)
-+#define MCF_INTFRCH MCF_REG32(0x000710)
-+#define MCF_INTFRCL MCF_REG32(0x000714)
-+#define MCF_IRLR MCF_REG08(0x000718)
-+#define MCF_IACKLPR MCF_REG08(0x000719)
-+#define MCF_SWIACK MCF_REG08(0x0007E0)
-+#define MCF_LnIACK(x) MCF_REG08(0x0007E4+((x)*0x004))
-+#define MCF_ICR(x) MCF_REG08(0x000740+((x)*0x001))
-+
-+/*
-+ * Slice Timers Registers
-+ */
-+#define MCF_SLTCNT(x) MCF_REG32(0x000900+((x)*0x010))
-+#define MCF_SCR(x) MCF_REG32(0x000904+((x)*0x010))
-+#define MCF_SCNT(x) MCF_REG32(0x000908+((x)*0x010))
-+#define MCF_SSR(x) MCF_REG32(0x00090C+((x)*0x010))
-+
-+/*
-+ * Interrupt sources
-+ */
-+#define ISC_EPORT_Fn(x) (x)
-+/* EPORT Interrupts */
-+#define ISC_USB_EPn(x) (15+(x))
-+/* USB Endopint */
-+#define ISC_USB_ISR (22)
-+/* USB General source */
-+#define ISC_USB_AISR (22)
-+/* USB core source */
-+#define ISC_DSPI_OVRFW (25)
-+/* DSPI overflow */
-+#define ISC_DSPI_RFOF (26)
-+#define ISC_DSPI_RFDF (27)
-+#define ISC_DSPI_TFUF (28)
-+#define ISC_DSPI_TCF (29)
-+#define ISC_DSPI_TFFF (30)
-+#define ISC_DSPI_EOQF (31)
-+#define ISC_PSCn(x) (35-(x))
-+#define ISC_COMM_TIM (36)
-+#define ISC_SEC (37)
-+#define ISC_FEC1 (38)
-+#define ISC_FEC0 (39)
-+#define ISC_I2C (40)
-+#define ISC_PCI_ARB (41)
-+#define ISC_PCI_CB (42)
-+#define ISC_PCI_XLB (43)
-+#define ISC_DMA (48)
-+#define ISC_CANn_ERR(x) (49+(6*(x)))
-+#define ISC_CANn_BUSOFF(x) (50+(6*(x)))
-+#define ISC_CANn_MBOR(x) (51+(6*(x)))
-+#define ISC_CAN0_WAKEIN (52)
-+#define ISC_SLTn(x) (54-(x))
-+#define ISC_GPTn(x) (62-(x))
-+
-+/*
-+ * Interrupt level and priorities
-+ */
-+#define ILP_TOP (MCF_ICR_IL(5) | MCF_ICR_IP(3))
-+#define ILP_SLT0 (MCF_ICR_IL(5) | MCF_ICR_IP(2))
-+#define ILP_SLT1 (MCF_ICR_IL(5) | MCF_ICR_IP(1))
-+#define ILP_DMA (MCF_ICR_IL(5) | MCF_ICR_IP(0))
-+#define ILP_SEC (MCF_ICR_IL(4) | MCF_ICR_IP(7))
-+#define ILP_FEC0 (MCF_ICR_IL(4) | MCF_ICR_IP(6))
-+#define ILP_FEC1 (MCF_ICR_IL(4) | MCF_ICR_IP(5))
-+#define ILP_PCI_XLB (MCF_ICR_IL(4) | MCF_ICR_IP(4))
-+#define ILP_PCI_ARB (MCF_ICR_IL(4) | MCF_ICR_IP(3))
-+#define ILP_PCI_CB (MCF_ICR_IL(4) | MCF_ICR_IP(2))
-+#define ILP_I2C (MCF_ICR_IL(4) | MCF_ICR_IP(1))
-+
-+#define ILP_USB_EPn(x) (MCF_ICR_IL(3) | MCF_ICR_IP(7-(x)))
-+#define ILP_USB_EP0 (MCF_ICR_IL(3) | MCF_ICR_IP(7))
-+#define ILP_USB_EP1 (MCF_ICR_IL(3) | MCF_ICR_IP(6))
-+#define ILP_USB_EP2 (MCF_ICR_IL(3) | MCF_ICR_IP(5))
-+#define ILP_USB_EP3 (MCF_ICR_IL(3) | MCF_ICR_IP(4))
-+#define ILP_USB_EP4 (MCF_ICR_IL(3) | MCF_ICR_IP(3))
-+#define ILP_USB_EP5 (MCF_ICR_IL(3) | MCF_ICR_IP(2))
-+#define ILP_USB_EP6 (MCF_ICR_IL(3) | MCF_ICR_IP(1))
-+#define ILP_USB_ISR (MCF_ICR_IL(3) | MCF_ICR_IP(0))
-+
-+#define ILP_USB_AISR (MCF_ICR_IL(2) | MCF_ICR_IP(7))
-+#define ILP_DSPI_OVRFW (MCF_ICR_IL(2) | MCF_ICR_IP(6))
-+#define ILP_DSPI_RFOF (MCF_ICR_IL(2) | MCF_ICR_IP(5))
-+#define ILP_DSPI_RFDF (MCF_ICR_IL(2) | MCF_ICR_IP(4))
-+#define ILP_DSPI_TFUF (MCF_ICR_IL(2) | MCF_ICR_IP(3))
-+#define ILP_DSPI_TCF (MCF_ICR_IL(2) | MCF_ICR_IP(2))
-+#define ILP_DSPI_TFFF (MCF_ICR_IL(2) | MCF_ICR_IP(1))
-+#define ILP_DSPI_EOQF (MCF_ICR_IL(2) | MCF_ICR_IP(0))
-+
-+#define ILP_COMM_TIM (MCF_ICR_IL(1) | MCF_ICR_IP(7))
-+#define ILP_PSCn(x) (MCF_ICR_IL(1) | MCF_ICR_IP(3-((x)&3)))
-+#define ILP_PSC0 (MCF_ICR_IL(1) | MCF_ICR_IP(3))
-+#define ILP_PSC1 (MCF_ICR_IL(1) | MCF_ICR_IP(2))
-+#define ILP_PSC2 (MCF_ICR_IL(1) | MCF_ICR_IP(1))
-+#define ILP_PSC3 (MCF_ICR_IL(1) | MCF_ICR_IP(0))
-+
-+
-+
-+
-+
-+/********************************************************************/
-+
-+/*
-+ * System Integration Unit Bitfields
-+ */
-+
-+/* SBCR */
-+#define MCF_SBCR_PIN2DSPI (0x08000000)
-+#define MCF_SBCR_DMA2CPU (0x10000000)
-+#define MCF_SBCR_CPU2DMA (0x20000000)
-+#define MCF_SBCR_PIN2DMA (0x40000000)
-+#define MCF_SBCR_PIN2CPU (0x80000000)
-+
-+/* SECSACR */
-+#define MCF_SECSACR_SEQEN (0x00000001)
-+
-+/* RSR */
-+#define MCF_RSR_RST (0x00000001)
-+#define MCF_RSR_RSTWD (0x00000002)
-+#define MCF_RSR_RSTJTG (0x00000008)
-+
-+/* JTAGID */
-+#define MCF_JTAGID_REV (0xF0000000)
-+#define MCF_JTAGID_PROCESSOR (0x0FFFFFFF)
-+#define MCF_JTAGID_MCF5485 (0x0800C01D)
-+#define MCF_JTAGID_MCF5484 (0x0800D01D)
-+#define MCF_JTAGID_MCF5483 (0x0800E01D)
-+#define MCF_JTAGID_MCF5482 (0x0800F01D)
-+#define MCF_JTAGID_MCF5481 (0x0801001D)
-+#define MCF_JTAGID_MCF5480 (0x0801101D)
-+#define MCF_JTAGID_MCF5475 (0x0801201D)
-+#define MCF_JTAGID_MCF5474 (0x0801301D)
-+#define MCF_JTAGID_MCF5473 (0x0801401D)
-+#define MCF_JTAGID_MCF5472 (0x0801501D)
-+#define MCF_JTAGID_MCF5471 (0x0801601D)
-+#define MCF_JTAGID_MCF5470 (0x0801701D)
-+
-+
-+/*
-+ * Interrupt Controller Bitfields
-+ */
-+#define MCF_IRLR_IRQ(x) (((x)&0x7F)<<1)
-+#define MCF_IACKLPR_PRI(x) (((x)&0x0F)<<0)
-+#define MCF_IACKLPR_LEVEL(x) (((x)&0x07)<<4)
-+#define MCF_ICR_IP(x) (((x)&0x07)<<0)
-+#define MCF_ICR_IL(x) (((x)&0x07)<<3)
-+
-+/*
-+ * Slice Timers Bitfields
-+ */
-+#define MCF_SCR_TEN (0x01000000)
-+#define MCF_SCR_IEN (0x02000000)
-+#define MCF_SCR_RUN (0x04000000)
-+#define MCF_SSR_ST (0x01000000)
-+#define MCF_SSR_BE (0x02000000)
-+
-+
-+/*
-+ * Some needed coldfire registers
-+ */
-+#define MCF_PAR_PCIBG MCF_REG16(0x000A48)
-+#define MCF_PAR_PCIBR MCF_REG16(0x000A4A)
-+#define MCF_PAR_PSCn(x) MCF_REG08(0x000A4F-((x)&0x3))
-+#define MCF_PAR_FECI2CIRQ MCF_REG16(0x000A44)
-+#define MCF_PAR_DSPI MCF_REG16(0x000A50)
-+#define MCF_PAR_TIMER MCF_REG08(0X000A52)
-+#define MCF_EPPAR MCF_REG16(0x000F00)
-+#define MCF_EPDDR MCF_REG08(0x000F04)
-+#define MCF_EPIER MCF_REG08(0x000F05)
-+#define MCF_EPFR MCF_REG08(0x000F0C)
-+
-+/*
-+ * Some GPIO bitfields
-+ */
-+#define MCF_PAR_SDA (0x0008)
-+#define MCF_PAR_SCL (0x0004)
-+#define MCF_PAR_PSC_TXD (0x04)
-+#define MCF_PAR_PSC_RXD (0x08)
-+#define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4)
-+#define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6)
-+#define MCF_PAR_PSC_CTS_GPIO (0x00)
-+#define MCF_PAR_PSC_CTS_BCLK (0x80)
-+#define MCF_PAR_PSC_CTS_CTS (0xC0)
-+#define MCF_PAR_PSC_RTS_GPIO (0x00)
-+#define MCF_PAR_PSC_RTS_FSYNC (0x20)
-+#define MCF_PAR_PSC_RTS_RTS (0x30)
-+#define MCF_PAR_PSC_CANRX (0x40)
-+
-+/*
-+ * FlexCAN Module Configuration Register
-+ */
-+#define CANMCR_MDIS (0x80000000)
-+#define CANMCR_FRZ (0x40000000)
-+#define CANMCR_HALT (0x10000000)
-+#define CANMCR_SOFTRST (0x02000000)
-+#define CANMCR_NOTRDY (0x08000000)
-+#define CANMCR_FRZACK (0x01000000)
-+#define CANMCR_SUPV (0x00800000)
-+#define CANMCR_MAXMB (0x0F)
-+/*
-+ * FlexCAN Control Register
-+ */
-+#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24)
-+#define CANCTRL_RJW(x) (((x)&0x03)<<22)
-+#define CANCTRL_PSEG1(x) (((x)&0x07)<<19)
-+#define CANCTRL_PSEG2(x) (((x)&0x07)<<16)
-+#define CANCTRL_BOFFMSK (0x00008000)
-+#define CANCTRL_ERRMSK (0x00004000)
-+#define CANCTRL_CLKSRC (0x00002000)
-+#define CANCTRL_LPB (0x00001000)
-+#define CANCTRL_SAMP(x) (((x)&0x01)<<7)
-+#define CANCTRL_BOFFREC (0x00000040)
-+#define CANCTRL_TSYNC (0x00000020)
-+#define CANCTRL_LBUF (0x00000010)
-+#define CANCTRL_LOM (0x00000008)
-+#define CANCTRL_PROPSEG(x) ((x)&0x07)
-+
-+/*
-+ * FlexCAN Error Counter Register
-+ */
-+#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8)
-+#define ERRCNT_TXECTR(x) ((x)&0xFF)
-+
-+/*
-+ * FlexCAN Error and Status Register
-+ */
-+#define ERRSTAT_BITERR(x) (((x)&0x03)<<14)
-+#define ERRSTAT_ACKERR (0x00002000)
-+#define ERRSTAT_CRCERR (0x00001000)
-+#define ERRSTAT_FRMERR (0x00000800)
-+#define ERRSTAT_STFERR (0x00000400)
-+#define ERRSTAT_TXWRN (0x00000200)
-+#define ERRSTAT_RXWRN (0x00000100)
-+#define ERRSTAT_IDLE (0x00000080)
-+#define ERRSTAT_TXRX (0x00000040)
-+#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4)
-+#define ERRSTAT_BOFFINT (0x00000004)
-+#define ERRSTAT_ERRINT (0x00000002)
-+
-+/*
-+ * Interrupt Mask Register
-+ */
-+#define IMASK_BUF15M (0x8000)
-+#define IMASK_BUF14M (0x4000)
-+#define IMASK_BUF13M (0x2000)
-+#define IMASK_BUF12M (0x1000)
-+#define IMASK_BUF11M (0x0800)
-+#define IMASK_BUF10M (0x0400)
-+#define IMASK_BUF9M (0x0200)
-+#define IMASK_BUF8M (0x0100)
-+#define IMASK_BUF7M (0x0080)
-+#define IMASK_BUF6M (0x0040)
-+#define IMASK_BUF5M (0x0020)
-+#define IMASK_BUF4M (0x0010)
-+#define IMASK_BUF3M (0x0008)
-+#define IMASK_BUF2M (0x0004)
-+#define IMASK_BUF1M (0x0002)
-+#define IMASK_BUF0M (0x0001)
-+#define IMASK_BUFnM(x) (0x1<<(x))
-+#define IMASK_BUFF_ENABLE_ALL (0xFFFF)
-+#define IMASK_BUFF_DISABLE_ALL (0x0000)
-+
-+/*
-+ * Interrupt Flag Register
-+ */
-+#define IFLAG_BUF15M (0x8000)
-+#define IFLAG_BUF14M (0x4000)
-+#define IFLAG_BUF13M (0x2000)
-+#define IFLAG_BUF12M (0x1000)
-+#define IFLAG_BUF11M (0x0800)
-+#define IFLAG_BUF10M (0x0400)
-+#define IFLAG_BUF9M (0x0200)
-+#define IFLAG_BUF8M (0x0100)
-+#define IFLAG_BUF7M (0x0080)
-+#define IFLAG_BUF6M (0x0040)
-+#define IFLAG_BUF5M (0x0020)
-+#define IFLAG_BUF4M (0x0010)
-+#define IFLAG_BUF3M (0x0008)
-+#define IFLAG_BUF2M (0x0004)
-+#define IFLAG_BUF1M (0x0002)
-+#define IFLAG_BUF0M (0x0001)
-+#define IFLAG_BUFF_SET_ALL (0xFFFF)
-+#define IFLAG_BUFF_CLEAR_ALL (0x0000)
-+#define IFLAG_BUFnM(x) (0x1<<(x))
-+
-+/*
-+ * Message Buffers
-+ */
-+#define MB_CNT_CODE(x) (((x)&0x0F)<<24)
-+#define MB_CNT_SRR (0x00400000)
-+#define MB_CNT_IDE (0x00200000)
-+#define MB_CNT_RTR (0x00100000)
-+#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF)
-+#define MB_ID_STD (0x07FF)
-+#define MB_ID_EXT (0x1FFFFFFF)
-+#define MB_CODE_MASK (0xF0FFFFFF)
-+#define CAN_MB 16
-+#define PDEV_MAX 2
-+
-+/*
-+ * Some used coldfire values
-+ */
-+#define MCF_EPIER_EPIE(x) (0x01 << (x))
-+#define MCF_EPPAR_EPPAx_FALLING (2)
-+#define MCF_EPPAR_EPPA(n, x) (((x)&0x0003) << (2*n))
-+
-+
-+#endif /* m5485sim_h */
---- /dev/null
-+++ b/arch/m68k/include/asm/m5485sram.h
-@@ -0,0 +1,12 @@
-+#ifndef SYS_SRAM_H
-+#define SYS_SRAM_H
-+
-+
-+#define SYS_SRAM_DMA_START (MCF_MBAR + 0x10000)
-+#define SYS_SRAM_DMA_SIZE 8192
-+#define SYS_SRAM_FEC_START (SYS_SRAM_DMA_START + SYS_SRAM_DMA_SIZE)
-+#define SYS_SRAM_FEC_SIZE 2048
-+#define SYS_SRAM_SEC_START (SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE)
-+#define SYS_SRAM_SEC_SIZE 1280
-+
-+#endif /* SYS_SRAM_H */
diff --git a/target/linux/coldfire/patches/004-MCF54418-support-in-Linux-2.6.38.patch b/target/linux/coldfire/patches/004-MCF54418-support-in-Linux-2.6.38.patch
deleted file mode 100644
index 87e03ef..0000000
--- a/target/linux/coldfire/patches/004-MCF54418-support-in-Linux-2.6.38.patch
+++ /dev/null
@@ -1,6643 +0,0 @@
-From b23f9dc392de5be8a2bc17342d6aee49208a80d8 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:39 +0800
-Subject: [PATCH 04/52] MCF54418 support in Linux 2.6.38
-
-Add MCF54418 support in Linux 2.6.38.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5441x/Makefile | 38 +
- arch/m68k/coldfire/m5441x/config.c | 604 +++++++++++++
- arch/m68k/coldfire/m5441x/devices.c | 787 +++++++++++++++++
- arch/m68k/configs/m54418twr_defconfig | 1244 +++++++++++++++++++++++++++
- arch/m68k/include/asm/cf_5441x_cacheflush.h | 527 ++++++++++++
- arch/m68k/include/asm/mcf5441x_ccm.h | 157 ++++
- arch/m68k/include/asm/mcf5441x_clock.h | 22 +
- arch/m68k/include/asm/mcf5441x_dspi.h | 671 +++++++++++++++
- arch/m68k/include/asm/mcf5441x_dtim.h | 95 ++
- arch/m68k/include/asm/mcf5441x_edma.h | 303 +++++++
- arch/m68k/include/asm/mcf5441x_eport.h | 94 ++
- arch/m68k/include/asm/mcf5441x_fbcs.h | 204 +++++
- arch/m68k/include/asm/mcf5441x_flexcan.h | 139 +++
- arch/m68k/include/asm/mcf5441x_gpio.h | 509 +++++++++++
- arch/m68k/include/asm/mcf5441x_intc.h | 727 ++++++++++++++++
- arch/m68k/include/asm/mcf5441x_pm.h | 33 +
- arch/m68k/include/asm/mcf5441x_rtc.h | 127 +++
- arch/m68k/include/asm/mcf5441x_scm.h | 33 +
- arch/m68k/include/asm/mcf5441x_sdramc.h | 141 +++
- arch/m68k/include/asm/mcf5441x_xbs.h | 77 ++
- 20 files changed, 6532 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/coldfire/m5441x/Makefile
- create mode 100644 arch/m68k/coldfire/m5441x/config.c
- create mode 100644 arch/m68k/coldfire/m5441x/devices.c
- create mode 100644 arch/m68k/configs/m54418twr_defconfig
- create mode 100644 arch/m68k/include/asm/cf_5441x_cacheflush.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_ccm.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_clock.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_dspi.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_dtim.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_edma.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_eport.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_fbcs.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_flexcan.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_gpio.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_intc.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_pm.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_rtc.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_scm.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_sdramc.h
- create mode 100644 arch/m68k/include/asm/mcf5441x_xbs.h
-
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/Makefile
-@@ -0,0 +1,38 @@
-+#
-+# Makefile for Linux arch/m68k/coldfire/m5441x source directory
-+#
-+
-+obj-$(CONFIG_M5441X) += devices.o config.o
-+
-+ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_FSL_USB2)),)
-+ obj-y += usb.o
-+endif
-+ifneq ($(strip $(CONFIG_USB_GADGET_FSL_USB2) $(CONFIG_USB_EHCI_HCD)),)
-+ifeq ($(strip $(CONFIG_USB_M5441X_FSLS)),)
-+ obj-y += usb_dr.o
-+endif
-+endif
-+
-+#ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_FSL_USB2)),)
-+ifneq ($(strip $(CONFIG_USB_OTG) $(CONFIG_USB_M5441X_MAX3353_FSLS)),)
-+ obj-y += xcvr.o
-+endif
-+ifneq ($(strip $(CONFIG_USB_M5441X_MAX3353_FSLS)), )
-+ obj-y += max3353_xc.o
-+ifneq ($(strip $(CONFIG_USB_OTG)),)
-+ obj-m += max3353_otg.o
-+endif
-+endif
-+
-+# USB Host controller support
-+ifneq ($(strip $(CONFIG_USB_M5441X_H1)),)
-+ obj-y += usb_host.o xcvr_host.o
-+endif
-+
-+ifneq ($(CONFIG_FEC),)
-+obj-y += fec.o
-+endif
-+
-+ifneq ($(CONFIG_MODELO_SWITCH),)
-+obj-y += l2switch.o
-+endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/config.c
-@@ -0,0 +1,604 @@
-+/*
-+ * linux/arch/m68k/coldfire/m5441x/config.c
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/console.h>
-+#include <linux/bootmem.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/clockchips.h>
-+#include <linux/delay.h>
-+#include <asm/bootinfo.h>
-+#include <asm/machdep.h>
-+#include <asm/coldfire.h>
-+#include <asm/cfcache.h>
-+#include <asm/cacheflush.h>
-+#include <asm/io.h>
-+#include <asm/cfmmu.h>
-+#include <asm/setup.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+#include <asm/movs.h>
-+#include <asm/movs.h>
-+#include <asm/page.h>
-+#include <asm/pgalloc.h>
-+#include <asm/cf-sram.h>
-+
-+#include <asm/mcfsim.h>
-+
-+#define UBOOT_EXTRA_CLOCKS
-+#include <asm/bootinfo.h>
-+
-+#include <asm/mcf5441x_intc.h>
-+#include <asm/mcf5441x_sdramc.h>
-+#include <asm/mcf5441x_fbcs.h>
-+#include <asm/mcf5441x_dtim.h>
-+#include <asm/mcf5441x_xbs.h>
-+
-+extern int get_irq_list(struct seq_file *p, void *v);
-+extern char _text, _end;
-+extern char _etext, _edata, __init_begin, __init_end;
-+extern struct console mcfrs_console;
-+extern char m68k_command_line[CL_SIZE];
-+extern unsigned long availmem;
-+extern unsigned long shadow_cacr;
-+EXPORT_SYMBOL(shadow_cacr);
-+extern struct mem_info m68k_ramdisk;
-+
-+static int irq_enable[NR_IRQS];
-+unsigned long num_pages;
-+
-+/* cf dma physical addresses */
-+unsigned long cf_dma_base;
-+EXPORT_SYMBOL(cf_dma_base);
-+unsigned long cf_dma_end;
-+EXPORT_SYMBOL(cf_dma_end);
-+unsigned long cf_dma_size;
-+EXPORT_SYMBOL(cf_dma_size);
-+
-+/* ethernet mac addresses from uboot */
-+unsigned char uboot_enet0[6];
-+unsigned char uboot_enet1[6];
-+
-+void coldfire_sort_memrec(void)
-+{
-+ int i, j;
-+
-+ /* Sort the m68k_memory records by address */
-+ for (i = 0; i < m68k_num_memory; ++i) {
-+ for (j = i + 1; j < m68k_num_memory; ++j) {
-+ if (m68k_memory[i].addr > m68k_memory[j].addr) {
-+ struct mem_info tmp;
-+ tmp = m68k_memory[i];
-+ m68k_memory[i] = m68k_memory[j];
-+ m68k_memory[j] = tmp;
-+ }
-+ }
-+ }
-+ /* Trim off discontiguous bits */
-+ for (i = 1; i < m68k_num_memory; ++i) {
-+ if ((m68k_memory[i-1].addr + m68k_memory[i-1].size) !=
-+ m68k_memory[i].addr) {
-+ printk(KERN_DEBUG "m68k_parse_bootinfo: "
-+ "addr gap between 0x%lx & 0x%lx\n",
-+ m68k_memory[i-1].addr+m68k_memory[i-1].size,
-+ m68k_memory[i].addr);
-+ m68k_num_memory = i;
-+ break;
-+ }
-+ }
-+}
-+
-+/*
-+ * UBoot Handler
-+ */
-+int __init uboot_commandline(char *bootargs)
-+{
-+ int len = 0, cmd_line_len;
-+ static struct uboot_record uboot_info;
-+ u32 offset = PAGE_OFFSET_RAW - PHYS_OFFSET;
-+
-+ extern unsigned long uboot_info_stk;
-+
-+ /* validate address */
-+ if ((uboot_info_stk < PAGE_OFFSET_RAW) ||
-+ (uboot_info_stk >= (PAGE_OFFSET_RAW + CONFIG_SDRAM_SIZE)))
-+ return 0;
-+
-+ /* Add offset to get post-remapped kernel memory location */
-+ uboot_info.bdi = (struct bd_info *)
-+ ((*(u32 *)(uboot_info_stk)) + offset);
-+ uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + offset;
-+ uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + offset;
-+ uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset;
-+ uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset;
-+
-+#if defined(CONFIG_BLK_DEV_INITRD)
-+ m68k_ramdisk.addr = uboot_info.initrd_start;
-+ m68k_ramdisk.size = (uboot_info.initrd_end - uboot_info.initrd_start) ?
-+ (uboot_info.initrd_end - uboot_info.initrd_start + 1) : 0;
-+#endif
-+
-+ /* copy over mac addresses */
-+ memcpy(uboot_enet0, uboot_info.bdi->bi_enet0addr, 6);
-+ memcpy(uboot_enet1, uboot_info.bdi->bi_enet1addr, 6);
-+
-+ /* copy command line */
-+ cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start;
-+ if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1))
-+ len = (int)strncpy(bootargs, (char *)uboot_info.cmd_line_start,\
-+ cmd_line_len);
-+
-+ return len;
-+}
-+
-+#define DEFAULT_COMMAND_LINE \
-+ "debug root=/dev/nfs rw \
-+ nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ \
-+ ip=172.27.155.51:172.27.155.1"
-+
-+/*
-+ * Early Coldfire Initialization.
-+ */
-+asmlinkage void __init cf_early_init(void)
-+{
-+ SET_VBR((void *)MCF_RAMBAR1);
-+
-+ /* Mask all interrupts */
-+ MCF_INTC0_IMRL = 0xFFFFFFFF;
-+ MCF_INTC0_IMRH = 0xFFFFFFFF;
-+ MCF_INTC1_IMRL = 0xFFFFFFFF;
-+ MCF_INTC1_IMRH = 0xFFFFFFFF;
-+
-+#if defined(CONFIG_USB)
-+ /* reset USB3300 */
-+ asm ("moveb #0x40, %%d0\n\t"
-+ "moveb %%d0, 0xec090000\n\t"
-+ : : : "%d0");
-+ mdelay(1);
-+ asm ("moveb #0x0, %%d0\n\t"
-+ "moveb %%d0, 0xec090000\n\t"
-+ : : : "%d0");
-+#endif
-+
-+#if defined(CONFIG_NOR_FLASH_BASE)
-+ MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE;
-+#else
-+ MCF_FBCS_CSAR(1) = 0x00000000;
-+#endif
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ MCF_FBCS_CSAR(0) = FLEXBUS_LCD_CMD_ADDRESS;
-+ MCF_FBCS_CSMR(0) = MCF_FBCS_CSMR_BAM_128K | MCF_FBCS_CSMR_V;
-+ MCF_FBCS_CSCR(0) = MCF_FBCS_CSCR_BLS | MCF_FBCS_CSCR_AA |
-+ MCF_FBCS_CSCR_PS_16;
-+#endif
-+
-+#if CONFIG_SDRAM_SIZE > (256*1024*1024)
-+ /* Init optional SDRAM chip select */
-+ MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B;
-+#endif
-+
-+ MCF_XBS_CRS2 = 0x100;
-+ /* Setup SDRAM crossbar(XBS) priorities */
-+ MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) | /*CPU*/
-+ MCF_XBS_PRS_M1(MCF_XBS_PRI_3) | /*eDMA*/
-+ MCF_XBS_PRS_M2(MCF_XBS_PRI_1) | /*FEC0*/
-+ MCF_XBS_PRS_M3(MCF_XBS_PRI_5) | /*FEC1*/
-+ MCF_XBS_PRS_M5(MCF_XBS_PRI_6) | /*PCI*/
-+ MCF_XBS_PRS_M6(MCF_XBS_PRI_4) | /*USB*/
-+ MCF_XBS_PRS_M7(MCF_XBS_PRI_7)); /*SBF*/
-+
-+ m68k_machtype = MACH_CFMMU;
-+ m68k_fputype = FPU_CFV4E;
-+ m68k_mmutype = MMU_CFV4E;
-+ m68k_cputype = CPU_CFV4E;
-+
-+ /* initialize PHYSRAM */
-+ m68k_num_memory = 0;
-+ m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE; /* phys */
-+ m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
-+
-+ if (!uboot_commandline(m68k_command_line)) {
-+#if defined(CONFIG_BOOTPARAM)
-+ strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
-+#else
-+ strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
-+#endif
-+ }
-+
-+ /* Invalidate caches via CACR */
-+ flush_bcache();
-+ cacr_set(CACHE_DISABLE_MODE);
-+
-+ /* Turn on caches via CACR, enable EUSP */
-+ cacr_set(CACHE_INITIAL_MODE);
-+}
-+
-+/* Assembler routines */
-+asmlinkage void buserr(void);
-+asmlinkage void trap(void);
-+asmlinkage void system_call(void);
-+asmlinkage void inthandler(void);
-+
-+void __init coldfire_trap_init(void)
-+{
-+ int i = 0;
-+ e_vector *vectors;
-+
-+ vectors = (e_vector *)MCF_RAMBAR1;
-+ /*
-+ * There is a common trap handler and common interrupt
-+ * handler that handle almost every vector. We treat
-+ * the system call and bus error special, they get their
-+ * own first level handlers.
-+ */
-+ for (i = 3; (i <= 23); i++)
-+ vectors[i] = trap;
-+ for (i = 33; (i <= 63); i++)
-+ vectors[i] = trap;
-+ for (i = 24; (i <= 31); i++)
-+ vectors[i] = inthandler;
-+ for (i = 64; (i < 255); i++)
-+ vectors[i] = inthandler;
-+
-+ vectors[255] = 0;
-+ vectors[2] = buserr;
-+ vectors[32] = system_call;
-+}
-+
-+void settimericr(unsigned int timer, unsigned int level)
-+{
-+ volatile unsigned char *icrp;
-+ unsigned int icr = 0;
-+ unsigned char irq = 0;
-+
-+ if (timer <= 3) {
-+ switch (timer) {
-+ case 0:
-+ irq = 32;
-+ icr = MCFSIM_ICR_TIMER0;
-+ break;
-+ case 1:
-+ irq = 33;
-+ icr = MCFSIM_ICR_TIMER1;
-+ break;
-+ case 2:
-+ irq = 34;
-+ icr = MCFSIM_ICR_TIMER2;
-+ break;
-+ case 3:
-+ irq = 35;
-+ icr = MCFSIM_ICR_TIMER3;
-+ break;
-+ }
-+
-+ icrp = (volatile unsigned char *) (icr);
-+ *icrp = level;
-+ coldfire_enable_irq0(irq);
-+ }
-+}
-+
-+void coldfire_sched_clk_init(void);
-+
-+void coldfire_tick(void)
-+{
-+ /* Reset the ColdFire timer */
-+ __raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM0_DTER);
-+}
-+
-+void __init coldfire_sched_init(irq_handler_t handler)
-+{
-+ unsigned int mcf_timerlevel = 5;
-+ unsigned int mcf_timervector = 64+32;
-+
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM0_DTMR);
-+ __raw_writel(((MCF_BUSCLK / 16) / HZ), MCF_DTIM0_DTRR);
-+ __raw_writew(MCF_DTIM_DTMR_ORRI | MCF_DTIM_DTMR_CLK_DIV16 |
-+ MCF_DTIM_DTMR_FRR | MCF_DTIM_DTMR_RST_EN, \
-+ MCF_DTIM0_DTMR);
-+
-+ request_irq(mcf_timervector, handler, IRQF_DISABLED, \
-+ "timer", (void *)MCF_DTIM0_DTMR);
-+
-+ settimericr(0, mcf_timerlevel);
-+
-+ /* initialize the fast clock */
-+ coldfire_sched_clk_init();
-+}
-+
-+int timerirqpending(int timer)
-+{
-+ unsigned int imr = 0;
-+ unsigned ret = 0;
-+
-+ switch (timer) {
-+ case 1:
-+ imr = 0x1;
-+ break;
-+ case 2:
-+ imr = 0x2;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ ret = getiprh() & imr;
-+ return ret;
-+}
-+
-+unsigned long coldfire_gettimeoffset(void)
-+{
-+ volatile unsigned long trr, tcn, offset;
-+
-+ tcn = __raw_readw(MCF_DTIM0_DTCN);
-+ trr = __raw_readl(MCF_DTIM0_DTRR);
-+ offset = (tcn * (1000000 / HZ)) / trr;
-+
-+ /* Check if we just wrapped the counters and maybe missed a tick */
-+ if ((offset < (1000000 / HZ / 2)) && timerirqpending(1))
-+ offset += 1000000 / HZ;
-+ return offset;
-+}
-+
-+/* sched_clock support */
-+
-+static unsigned long long sched_clk_val;
-+
-+static irqreturn_t coldfire_sched_clk_irq(int irq, void *dev)
-+{
-+ __raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM3_DTER);
-+ sched_clk_val += 0x100000000LL;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Setup DTIM3 as the 5441x sched_clock() implementation. The
-+ * input frequency to the clock is the internal bus clock (MCF_BUSCLK)
-+ * which is the system clock (MCF_CLK) / 2.
-+ *
-+ * On a system running at 266Mhz:
-+ * MCF_CLK = 266Mhz (266000000)
-+ * MCF_BUSCLK = 133Mhz (133000000)
-+ * DTIM3 Tick = 133Mhz (133000000)
-+ * Tick Resolution = 7.5ns (round to 8ns/Tick)
-+ *
-+ * On a system running at 240Mhz:
-+ * MCF_CLK = 240Mhz (240000000)
-+ * MCF_BUSCLK = 120Mhz (120000000)
-+ * DTIM3 Tick = 120Mhz (120000000)
-+ * Tick Resolution = 8.4ns (round to 8ns/Tick)
-+ */
-+void __init coldfire_sched_clk_init(void)
-+{
-+ unsigned int mcf_timerlevel = 5;
-+ unsigned int mcf_timervector = 64+32+3; /* DTIM3 */
-+
-+ printk(KERN_INFO "Initializing DTIM3 for sched_clock\n");
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM3_DTMR);
-+ __raw_writel(0xffffffff, MCF_DTIM3_DTRR);
-+ __raw_writew(MCF_DTIM_DTMR_ORRI | MCF_DTIM_DTMR_CLK_DIV1 | \
-+ MCF_DTIM_DTMR_RST_EN, MCF_DTIM3_DTMR);
-+
-+ sched_clk_val = 0;
-+ request_irq(mcf_timervector, coldfire_sched_clk_irq, IRQF_DISABLED, \
-+ "timer", (void *)MCF_DTIM3_DTMR);
-+
-+ settimericr(3, mcf_timerlevel);
-+}
-+
-+#ifndef CONFIG_GENERIC_CLOCKEVENTS
-+/* get highres timer */
-+unsigned long long sched_clock(void)
-+{
-+ unsigned long long ret = 0;
-+ ret = sched_clk_val | (unsigned long long)(MCF_REG32(MCF_DTIM3_DTCN));
-+ ret = ret << 3;
-+ return ret;
-+}
-+
-+#else /*CONFIG_GENERIC_CLOCKEVENTS*/
-+
-+static unsigned long long sched_dtim_clk_val;
-+
-+unsigned long long sched_clock(void)
-+{
-+ unsigned long flags;
-+ unsigned long long tcn, cycles;
-+
-+ local_irq_save(flags);
-+ tcn = ((unsigned long long)(MCF_REG32(MCF_DTIM2_DTCN)));
-+ cycles = sched_dtim_clk_val;
-+ local_irq_restore(flags);
-+ return cycles + tcn;
-+}
-+
-+unsigned long long sys_dtim2_read(void)
-+{
-+ unsigned long flags;
-+ unsigned long long tcn, cycles;
-+
-+ local_irq_save(flags);
-+ tcn = ((unsigned long long)(MCF_REG32(MCF_DTIM2_DTCN)));
-+ cycles = sched_dtim_clk_val;
-+ local_irq_restore(flags);
-+
-+ return cycles + tcn;
-+}
-+
-+static irqreturn_t coldfire_dtim_clk_irq(int irq, void *dev)
-+{
-+ struct clock_event_device *evt = (struct clock_event_device *)dev;
-+
-+ __raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM2_DTER);
-+ sched_dtim_clk_val += (MCF_BUSCLK / 16) / HZ;
-+ evt->event_handler(evt);
-+ return IRQ_HANDLED;
-+}
-+
-+void sys_dtim2_init(struct clock_event_device *evt)
-+{
-+ unsigned int mcf_timerlevel = 5;
-+ unsigned int mcf_timervector = 64+32+2; /* DTIM2 */
-+
-+ printk(KERN_INFO "Initializing DTIM2 for sched_clock\n");
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM2_DTMR);
-+ __raw_writel(((MCF_BUSCLK / 16) / HZ)-1, MCF_DTIM2_DTRR);
-+ __raw_writew(MCF_DTIM_DTMR_ORRI | MCF_DTIM_DTMR_CLK_DIV16 |
-+ MCF_DTIM_DTMR_FRR | MCF_DTIM_DTMR_RST_EN, \
-+ MCF_DTIM2_DTMR);
-+
-+ request_irq(mcf_timervector, coldfire_dtim_clk_irq, IRQF_DISABLED, \
-+ "timer2", (void *)evt);
-+
-+ settimericr(3, mcf_timerlevel);
-+ return;
-+}
-+
-+#endif
-+
-+void coldfire_reboot(void)
-+{
-+ /* disable interrupts and do a software reset */
-+ asm("movew #0x2700, %%sr\n\t"
-+ "moveb #0x40, %%d0\n\t"
-+ "moveb %%d0, 0xec090000\n\t"
-+ : : : "%d0");
-+
-+ mdelay(10);
-+
-+ asm("moveb #0xc0, %%d0\n\t"
-+ "moveb %%d0, 0xec090000\n\t"
-+ : : : "%d0");
-+}
-+
-+static void coldfire_get_model(char *model)
-+{
-+ sprintf(model, "Version 4 ColdFire");
-+}
-+
-+/*
-+ * Setup the nodes and the boot memory.
-+ *
-+ * memory_start and memory_end are VIRTUAL addresses
-+ */
-+static void __init
-+coldfire_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
-+{
-+ unsigned long base_pfn;
-+
-+ /* compute total pages in system */
-+ num_pages = PAGE_ALIGN(memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
-+
-+ /* align start/end to page boundries */
-+ memory_start = PAGE_ALIGN(memory_start);
-+ memory_end = memory_end & PAGE_MASK;
-+
-+ /* page numbers */
-+ base_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
-+ min_low_pfn = __pa(memory_start) >> PAGE_SHIFT;
-+ max_low_pfn = __pa(memory_end) >> PAGE_SHIFT;
-+
-+ high_memory = (void *)memory_end;
-+ availmem = memory_start;
-+
-+ /* setup bootmem data */
-+ m68k_setup_node(0);
-+ availmem += init_bootmem_node(NODE_DATA(0), min_low_pfn,
-+ base_pfn, max_low_pfn);
-+ availmem = PAGE_ALIGN(availmem);
-+
-+ printk(KERN_INFO "** availmem=0x%lx pa(am)=0x%lx\n",
-+ availmem, __pa(availmem));
-+ printk(KERN_INFO "** mstart=0x%lx mend=0x%lx\n",
-+ memory_start, memory_end);
-+ printk(KERN_INFO "bpfn=0x%lx minpfn=0x%lx maxpfn=0x%lx\n",
-+ base_pfn, min_low_pfn, max_low_pfn);
-+
-+ /* turn over physram */
-+ free_bootmem(__pa(availmem), memory_end - availmem);
-+
-+ /* configure physical dma area */
-+ cf_dma_base = __pa(PAGE_ALIGN(memory_start));
-+ cf_dma_size = CONFIG_DMA_SIZE;
-+ cf_dma_end = CONFIG_SDRAM_BASE + cf_dma_size - 1;
-+
-+ printk(KERN_INFO "dma: phys base=0x%lx phys end=0x%lx virt base=0x%x\n",
-+ cf_dma_base, cf_dma_end, CONFIG_DMA_BASE);
-+
-+ printk(KERN_INFO "mdma=0x%x pa(mdma)=0x%lx\n",
-+ MAX_DMA_ADDRESS, __pa(MAX_DMA_ADDRESS));
-+}
-+
-+/*
-+ * Architecture setup for Coldfire
-+ */
-+void __init config_coldfire(void)
-+{
-+ unsigned long endmem, startmem;
-+
-+ /*
-+ * Calculate endmem from m68k_memory[0] assuming that a single
-+ * chunk of ram is being configured.
-+ */
-+ startmem = ((((int) &_end) + (PAGE_SIZE - 1)) & PAGE_MASK);
-+ endmem = PAGE_OFFSET + m68k_memory[0].size;
-+
-+ /* set virt to node shift to be the high nibble byte */
-+ m68k_virt_to_node_shift = 28;
-+
-+ printk(KERN_INFO "starting up linux startmem 0x%lx, endmem 0x%lx, \
-+ size %luMB\n", startmem, endmem, (endmem - startmem) >> 20);
-+
-+ memset(irq_enable, 0, sizeof(irq_enable));
-+
-+/* JKM -- moved early*/
-+/*register_console(&mcfrs_console);*/
-+
-+ /*
-+ * Setup coldfire mach-specific handlers
-+ */
-+ mach_max_dma_address = 0xffffffff;
-+ mach_sched_init = coldfire_sched_init;
-+ mach_tick = coldfire_tick;
-+ mach_gettimeoffset = coldfire_gettimeoffset;
-+ mach_reset = coldfire_reboot;
-+ mach_get_model = coldfire_get_model;
-+
-+ coldfire_bootmem_alloc(startmem, endmem-1);
-+
-+#if defined(CONFIG_DUMMY_CONSOLE) || defined(CONFIG_FRAMEBUFFER_CONSOLE)
-+ conswitchp = &dummy_con;
-+#endif
-+
-+#if defined(CONFIG_SERIAL_COLDFIRE)
-+ /*
-+ * This causes trouble when it is re-registered later.
-+ * Currently this is fixed by conditionally commenting
-+ * out the register_console in mcf_serial.c
-+ */
-+/*JKM -- moved earlier*/
-+ register_console(&mcfrs_console);
-+#endif
-+}
-+
-+#ifdef CONFIG_SRAM
-+static int __init setup_sram_pool(void)
-+{
-+ declare_sram_pool((void *)CONFIG_SRAM_BASE, CONFIG_SRAM_SIZE);
-+ return 0;
-+}
-+postcore_initcall(setup_sram_pool);
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/devices.c
-@@ -0,0 +1,787 @@
-+/*
-+ * Coldfire M5441x Platform Device Configuration
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Lanttor.Guo@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+#include <linux/i2c.h>
-+
-+#include <linux/interrupt.h>
-+#include <linux/init.h>
-+#include <linux/mtd/partitions.h>
-+#ifdef CONFIG_MMC_SPI
-+#include <linux/mmc/host.h>
-+#include <linux/spi/mmc_spi.h>
-+#endif
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfuart.h>
-+#include <asm/mcfqspi.h>
-+#include <asm/mcfdspi.h>
-+#include <asm/cf_io.h>
-+
-+/*
-+ * I2C: only support i2c0 module on m5441x platform
-+ */
-+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-+static struct resource coldfire_i2c_resources[] = {
-+ { /* I/O */
-+ .start = 0xFC058000,
-+ .end = 0xFC058010,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ { /* IRQ */
-+ .start = (64 + 30),
-+ .end = (64 + 30),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device coldfire_i2c_device = {
-+ .name = "mcf-i2c",
-+ .id = 0, /*bus number*/
-+ .num_resources = ARRAY_SIZE(coldfire_i2c_resources),
-+ .resource = coldfire_i2c_resources,
-+};
-+
-+static void mcf5441x_init_i2c(void)
-+{
-+ MCF_PM_PPMCR0 = 22;
-+ platform_device_register(&coldfire_i2c_device);
-+}
-+
-+#ifdef CONFIG_I2C_BOARDINFO
-+static struct i2c_board_info mcf_i2c_devices[] = {
-+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
-+ {
-+ I2C_BOARD_INFO("max3353", 0x2c),
-+ },
-+#endif
-+};
-+#endif
-+
-+#endif
-+
-+#if defined(CONFIG_MMC_ESDHC)
-+static struct resource sd_mmc_esdhc_resources[] = {
-+ [0] = {
-+ .name = "esdhc-module",
-+ .start = 0xFC0CC000,
-+ .end = 0xFC0CC000 + 0x100,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .name = "esdhc-int-level",
-+ .start = (64 + 64 + 64 + 31),
-+ .end = (64 + 64 + 64 + 31),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .name = "esdhc-pin",
-+ .start = &MCF_GPIO_PAR_ESDHCH,
-+ .end = &MCF_GPIO_PAR_ESDHCL,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [3] = {
-+ .name = "esdhc-slew",
-+ .start = &MCF_GPIO_SRCR_SDHC,
-+ .end = &MCF_GPIO_SRCR_SDHC,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device sd_mmc_esdhc_device = {
-+ .name = "esdhc",
-+ .id = -1,
-+ .resource = sd_mmc_esdhc_resources,
-+ .num_resources = ARRAY_SIZE(sd_mmc_esdhc_resources),
-+};
-+#endif
-+
-+#if defined(CONFIG_MTD_NAND_FSL_NFC)
-+static struct resource nfc_resources[] = {
-+ [0] = {
-+ .name = "nfc-config",
-+ .start = 0xFC0FC000,
-+ .end = 0xFC0FFF3B,
-+ .flags = IORESOURCE_MEM,
-+
-+ },
-+ [1] = {
-+ .name = "nfc-int-level",
-+ .start = (64 + 64 + 64 + 25),
-+ .end = (64 + 64 + 64 + 25),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+};
-+static struct platform_device nfc_device = {
-+ .name = "fsl_nfc",
-+ .id = -1,
-+ .resource = nfc_resources,
-+ .num_resources = ARRAY_SIZE(nfc_resources),
-+};
-+#endif
-+
-+/*
-+ * DSPI
-+ */
-+#ifdef CONFIG_SPI
-+
-+#if defined(CONFIG_DSPI0) /* DSPI0 initialization */
-+#define M5441X_DSPI0_MCR 0xFC05C000 /* base */
-+
-+#define M5441X_DSPI0_IRQ_SOURCE (31)
-+#define M5441X_DSPI0_IRQ_VECTOR (64 + M5441X_DSPI0_IRQ_SOURCE)
-+
-+/* number of supported SPI selects */
-+#define SPI_NUM_CHIPSELECTS 8
-+
-+#define M5441X_SPI0_PAR_VAL (MCF_GPIO_PAR_DSPI0_SCK_DSPI0SCK | \
-+ MCF_GPIO_PAR_DSPI0_SOUT_DSPI0SOUT | \
-+ MCF_GPIO_PAR_DSPI0_SIN_DSPI0SIN | \
-+ MCF_GPIO_PAR_DSPI0_PCS0_DSPI0PCS0)
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static struct mtd_partition at26df081a_partitions[] = {
-+ {
-+ .name = "at26df081a",
-+ .size = (1024*64*16),
-+ .offset = 0x00000000,
-+ .mask_flags = 0,
-+ }
-+};
-+#endif
-+
-+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
-+static struct flash_platform_data at26df081a_platform_data = {
-+ .name = "Atmel at26df081a SPI Flash chip",
-+#ifdef CONFIG_MTD_PARTITIONS
-+ .parts = at26df081a_partitions,
-+ .nr_parts =
-+ sizeof(at26df081a_partitions) / sizeof(*at26df081a_partitions),
-+#endif
-+ .type = "at26df081a"
-+};
-+
-+static struct coldfire_dspi_chip at26df081a_chip_info = {
-+ .mode = SPI_MODE_0,
-+ .bits_per_word = 16, /* How many bits per word to transfer
-+ per one time (8 or 16) */
-+ .void_write_data = 0,
-+ .dbr = 0,
-+ .pbr = 0,
-+ .br = 0,
-+ .pcssck = 1,
-+ .pasc = 1,
-+ .pdt = 1,
-+ .cssck = 4,
-+ .asc = 4,
-+ .dt = 14,
-+};
-+#endif
-+
-+#if defined(CONFIG_FB_FSL_SSD1289) || defined(CONFIG_FB_FSL_SSD1289_MODULE)
-+static struct fsl_ssd1289_fb_display fsl_ssd1289_data = {
-+ .width = 320,
-+ .height = 240,
-+ .xres = 320,
-+ .yres = 240,
-+ .bpp = 16,
-+};
-+#endif
-+
-+#if defined(CONFIG_SSD1289_SPI_MODE)
-+static struct coldfire_dspi_chip ssd1289_chip_info = {
-+ .mode = SPI_MODE_0,
-+ .bits_per_word = 9,
-+ .void_write_data = 0,
-+ .dbr = 0,
-+ .pbr = 0,
-+ .br = 1,
-+ .pcssck = 0,
-+ .pasc = 0,
-+ .pdt = 0,
-+ .cssck = 0,
-+ .asc = 0,
-+ .dt = 0,
-+};
-+#endif
-+
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+static struct coldfire_dspi_chip spidev_chip_info = {
-+ .bits_per_word = 8,
-+};
-+#endif
-+
-+
-+static struct coldfire_spi_master spi0_master_info = {
-+ .bus_num = 1,
-+ .num_chipselect = SPI_NUM_CHIPSELECTS,
-+ .irq_list = 0, /* not used */
-+ .irq_source = M5441X_DSPI0_IRQ_SOURCE,
-+ .irq_vector = M5441X_DSPI0_IRQ_VECTOR,
-+ .irq_mask = (1 << M5441X_DSPI0_IRQ_SOURCE),
-+ .irq_lp = 0x2, /* irq level */
-+ .par_val = M5441X_SPI0_PAR_VAL,
-+ .cs_control = NULL,
-+};
-+
-+static struct resource coldfire_spi0_resources[] = {
-+ [0] = {
-+ .name = "spi-par",
-+ .start = (u32)&MCF_GPIO_PAR_DSPI0WH, /* PAR_DSPI0 */
-+ .end = (u32)&MCF_GPIO_PAR_DSPI0WH, /* PAR_DSPI0 */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [1] = {
-+ .name = "spi-module",
-+ .start = M5441X_DSPI0_MCR, /* DSPI MCR Base */
-+ .end = M5441X_DSPI0_MCR + 0xc0, /* DSPI mem map end */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [2] = {
-+ .name = "spi-int-level",
-+ .start = (u32)&MCF_INTC0_ICR31, /* ICR start */
-+ .end = (u32)&MCF_INTC0_ICR31, /* ICR end */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [3] = {
-+ .name = "spi-int-mask",
-+ .start = (u32)&MCF_INTC0_IMRL, /* IMRL */
-+ .end = (u32)&MCF_INTC0_IMRL, /* IMRL */
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct platform_device coldfire_spi0 = {
-+ .name = "spi_coldfire",
-+ .id = -1,
-+ .resource = coldfire_spi0_resources,
-+ .num_resources = ARRAY_SIZE(coldfire_spi0_resources),
-+ .dev = {
-+ .platform_data = &spi0_master_info,
-+ }
-+};
-+
-+#elif defined(CONFIG_DSPI1) /* DSPI1 initialization */
-+#define M5441X_DSPI1_MCR 0xFC03C000 /* base */
-+
-+#define M5441X_DSPI1_IRQ_SOURCE (54)
-+#define M5441X_DSPI1_IRQ_VECTOR (64 + 64 + M5441X_DSPI1_IRQ_SOURCE)
-+
-+/* number of supported SPI selects */
-+#define SPI_NUM_CHIPSELECTS 8
-+
-+
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+static struct coldfire_dspi_chip spidev_chip_info = {
-+ .bits_per_word = 8,
-+};
-+#endif
-+
-+static struct coldfire_spi_master spi1_master_info = {
-+ .bus_num = 1,
-+ .num_chipselect = SPI_NUM_CHIPSELECTS,
-+ .irq_list = 0, /* not used */
-+ .irq_source = M5441X_DSPI1_IRQ_SOURCE,
-+ .irq_vector = M5441X_DSPI1_IRQ_VECTOR,
-+ .irq_mask = (1 << (M5441X_DSPI1_IRQ_SOURCE - 32)),
-+ .irq_lp = 0x2, /* irq level */
-+ .cs_control = NULL,
-+};
-+
-+static struct resource coldfire_spi1_resources[] = {
-+ [0] = {
-+ .name = "spi-par",
-+ .start = (u32)&MCF_GPIO_PAR_ESDHCH, /* PAR_ESDHCH */
-+ .end = (u32)&MCF_GPIO_PAR_ESDHCL, /* PAR_ESDHCL */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [1] = {
-+ .name = "spi-module",
-+ .start = M5441X_DSPI1_MCR, /* DSPI MCR Base */
-+ .end = M5441X_DSPI1_MCR + 0xc0, /* DSPI mem map end */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [2] = {
-+ .name = "spi-int-level",
-+ .start = (u32)&MCF_INTC1_ICR54, /* ICR start */
-+ .end = (u32)&MCF_INTC1_ICR54, /* ICR end */
-+ .flags = IORESOURCE_MEM
-+ },
-+
-+ [3] = {
-+ .name = "spi-int-mask",
-+ .start = (u32)&MCF_INTC1_IMRH, /* IMRL */
-+ .end = (u32)&MCF_INTC1_IMRH, /* IMRL */
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct platform_device coldfire_spi1 = {
-+ .name = "spi_coldfire",
-+ .id = -1,
-+ .resource = coldfire_spi1_resources,
-+ .num_resources = ARRAY_SIZE(coldfire_spi1_resources),
-+ .dev = {
-+ .platform_data = &spi1_master_info,
-+ }
-+};
-+
-+#ifdef CONFIG_MMC_SPI
-+static struct coldfire_dspi_chip dspi_sd_chip_info = {
-+ .mode = SPI_MODE_0,
-+ .bits_per_word = 8,
-+ .void_write_data = 0xff,
-+ .dbr = 0,
-+ .pbr = 1,
-+ .br = 1,
-+ .pcssck = 2,
-+ .pasc = 2,
-+ .pdt = 2,
-+ .cssck = 5,
-+ .asc = 5,
-+ .dt = 5,
-+};
-+
-+int mmc_spi_init(struct device *mmc_spi_device,
-+ irqreturn_t mmc_spi_irq_handler(int irq, void *private),
-+ void *irq_privatedata)
-+{
-+ int ret;
-+#if defined(CONFIG_DETECT_USE_EXTERN_IRQ1)
-+ int card_detect_extern_irq = 64 + 1;
-+ /*this is irq1 hardware work round*/
-+ MCF_GPIO_PAR_IRQ0H |= 0x3;
-+
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA1_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE1;
-+
-+ MCF_INTC0_ICR1 = 7; /* IRQ1 */
-+#if debug_mmc_spi
-+ printk(KERN_INFO "MCF_INTC0_ICR1 %x MCF_EPORT_EPPAR %x "
-+ "MCF_EPORT_EPFR %x MCF_EPORT_EPIER %x "
-+ "MCF_INTC0_IMRL %x MCF_INTC0_INTFRCL %x "
-+ "MCF_INTC0_IPRL %x\n",
-+ MCF_INTC0_ICR1, MCF_EPORT_EPPAR, MCF_EPORT_EPFR,
-+ MCF_EPORT_EPIER, MCF_INTC0_IMRL, MCF_INTC0_INTFRCL,
-+ MCF_INTC0_IPRL);
-+#endif
-+#elif defined(CONFIG_DETECT_USE_EXTERN_IRQ7)
-+ int card_detect_extern_irq = 64 + 7;
-+ MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ7;
-+
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+
-+ MCF_INTC0_ICR7 = 2; /* IRQ7 */
-+#ifdef debug_mmc_spi
-+ printk("MCF_INTC0_ICR7 %x MCF_EPORT_EPPAR %x\n",
-+ MCF_INTC0_ICR7, MCF_EPORT_EPPAR);
-+#endif
-+#else
-+ int card_detect_extern_irq = 64 + 7;
-+ MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ7;
-+
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+
-+ MCF_INTC0_ICR7 = 2; /* IRQ7 */
-+#ifdef debug_mmc_spi
-+ printk(KERN_INFO "MCF_INTC0_ICR1 %x MCF_EPORT_EPPAR %x\n",
-+ MCF_INTC0_ICR7, MCF_EPORT_EPPAR);
-+#endif
-+#endif
-+
-+ ret = request_irq(card_detect_extern_irq,
-+ mmc_spi_irq_handler, IRQF_DISABLED,
-+ "mmc_spi_irq", irq_privatedata);
-+ if (ret) {
-+ printk(KERN_INFO "%s: request irq fail %x\n", __func__, ret);
-+ return -EBUSY;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct mmc_spi_platform_data mcf5441x_mmc_pdata = {
-+ .ocr_mask = MMC_VDD_33_34,
-+ .init = mmc_spi_init,
-+};
-+#endif
-+
-+#endif
-+
-+/* DSPI device */
-+static struct spi_board_info spi_board_info[] = {
-+
-+#if defined(CONFIG_DSPI1) && defined(CONFIG_MMC_SPI)
-+ {
-+ .modalias = "mmc_spi",
-+ .max_speed_hz = 50000000,
-+ .bus_num = 1,
-+ .chip_select = 0,
-+ .platform_data = &mcf5441x_mmc_pdata,
-+ .controller_data = &dspi_sd_chip_info,
-+ },
-+#endif
-+#if defined(CONFIG_DSPI0) && (defined(CONFIG_MTD_M25P80) || \
-+ defined(CONFIG_MTD_M25P80_MODULE))
-+ {
-+ .modalias = "m25p80", /* Name of spi driver for this device */
-+ .max_speed_hz = 70000000, /* max spi clock in HZ */
-+ .bus_num = 1,
-+ .chip_select = CONFIG_DSP0_SBF_CS,
-+ .platform_data = &at26df081a_platform_data,
-+ .controller_data = &at26df081a_chip_info
-+ },
-+#endif
-+
-+#if defined(CONFIG_DSPI0) && defined(CONFIG_SSD1289_SPI_MODE)
-+ {
-+ .modalias = "spi-ssd1289",
-+ .max_speed_hz = 50000000,
-+ .bus_num = 1,
-+ .chip_select = 0,
-+ .platform_data = &fsl_ssd1289_data,
-+ .controller_data = &ssd1289_chip_info
-+ },
-+#endif
-+
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+ {
-+ .modalias = "spidev",
-+ .max_speed_hz = 16000000, /* max clk (SCK) speed in HZ */
-+ .bus_num = 1,
-+ .chip_select = 0, /* CS0 */
-+ .controller_data = &spidev_chip_info,
-+ },
-+#endif
-+};
-+
-+/*
-+ * m5441x_spi_init - Initialize SPI
-+ */
-+static int __init m5441x_spi_init(void)
-+{
-+ int retval;
-+
-+ /* register device */
-+#if defined(CONFIG_DSPI0)
-+ MCF_GPIO_PAR_DSPI0WH =
-+ (MCF_GPIO_PAR_DSPI0WH & MCF_GPIO_PAR_DSPI0_SCK_MASK) |
-+ MCF_GPIO_PAR_DSPI0_SCK_DSPI0SCK;
-+ MCF_GPIO_PAR_DSPI0WH =
-+ (MCF_GPIO_PAR_DSPI0WH & MCF_GPIO_PAR_DSPI0_SOUT_MASK) |
-+ MCF_GPIO_PAR_DSPI0_SOUT_DSPI0SOUT;
-+ MCF_GPIO_PAR_DSPI0WH =
-+ (MCF_GPIO_PAR_DSPI0WH & MCF_GPIO_PAR_DSPI0_SIN_MASK) |
-+ MCF_GPIO_PAR_DSPI0_SIN_DSPI0SIN;
-+ MCF_GPIO_PAR_DSPI0WH =
-+ (MCF_GPIO_PAR_DSPI0WH & MCF_GPIO_PAR_DSPI0_PCS0_MASK) |
-+ MCF_GPIO_PAR_DSPI0_PCS0_DSPI0PCS0;
-+ MCF_GPIO_PAR_DSPI0WL = 0x80;
-+ retval = platform_device_register(&coldfire_spi0);
-+ if (retval < 0)
-+ goto out;
-+#elif defined(CONFIG_DSPI1)
-+ MCF_PM_PPMCR0 = 0xf;
-+ MCF_GPIO_PAR_ESDHCH = 0x55; /* DAT[3:0] */
-+ MCF_GPIO_PAR_ESDHCL = 0x05; /* CMD, CLK */
-+ MCF_GPIO_SRCR_IRQ0 = 3;
-+ MCF_GPIO_SRCR_SDHC = 3;
-+ retval = platform_device_register(&coldfire_spi1);
-+ if (retval < 0)
-+ goto out;
-+#endif
-+
-+ /* register board info */
-+ if (ARRAY_SIZE(spi_board_info))
-+ retval = spi_register_board_info(spi_board_info,
-+ ARRAY_SIZE(spi_board_info));
-+
-+out:
-+ return retval;
-+}
-+#endif
-+
-+#if defined(CONFIG_SERIAL_MCF) || defined(CONFIG_SERIAL_MCF_MODULE)
-+/*
-+ * UART initialization
-+ */
-+static struct mcf_platform_uart m5441x_uart_platform[] = {
-+#ifdef CONFIG_SERIAL_MCF_UART0
-+ {
-+ .mapbase = MCFUART_BASE0,
-+ .irq = MCFINT0_VECBASE + MCFINT_UART0,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART1
-+ {
-+ .mapbase = MCFUART_BASE1,
-+ .irq = MCFINT0_VECBASE + MCFINT_UART1,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART2
-+ {
-+ .mapbase = MCFUART_BASE2,
-+ .irq = MCFINT0_VECBASE + MCFINT_UART2,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART3
-+ {
-+ .mapbase = MCFUART_BASE3,
-+ .irq = MCFINT0_VECBASE + MCFINT_UART3,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART4
-+ {
-+ .mapbase = MCFUART_BASE4,
-+ .irq = MCFINT1_VECBASE + MCFINT_UART4,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART5
-+ {
-+ .mapbase = MCFUART_BASE5,
-+ .irq = MCFINT1_VECBASE + MCFINT_UART5,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART6
-+ {
-+ .mapbase = MCFUART_BASE6,
-+ .irq = MCFINT1_VECBASE + MCFINT_UART6,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART7
-+ {
-+ .mapbase = MCFUART_BASE7,
-+ .irq = MCFINT1_VECBASE + MCFINT_UART7,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART8
-+ {
-+ .mapbase = MCFUART_BASE8,
-+ .irq = MCFINT1_VECBASE + MCFINT_UART8,
-+ },
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART9
-+ {
-+ .mapbase = MCFUART_BASE9,
-+ .irq = MCFINT1_VECBASE + MCFINT_UART9,
-+ },
-+#endif
-+ {}
-+};
-+
-+static struct platform_device m5441x_uart = {
-+ .name = "mcfuart",
-+ .id = 0,
-+ .dev.platform_data = m5441x_uart_platform,
-+};
-+
-+static void m5441x_uarts_init(void)
-+{
-+#ifdef CONFIG_SERIAL_MCF_UART0
-+ /* enable uart0 clock */
-+ MCF_PM_PPMCR0 = 24;
-+ /* gpio pin assignment for uart0 */
-+ MCF_GPIO_PAR_UART0 =
-+ (MCF_GPIO_PAR_UART0 & MCF_GPIO_PAR_UART0_U0RXD_MASK) |
-+ MCF_GPIO_PAR_UART0_U0RXD_U0RXD;
-+ MCF_GPIO_PAR_UART0 =
-+ (MCF_GPIO_PAR_UART0 & MCF_GPIO_PAR_UART0_U0TXD_MASK) |
-+ MCF_GPIO_PAR_UART0_U0TXD_U0TXD;
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART1
-+ /* enable uart1 clock */
-+ MCF_PM_PPMCR0 = 25;
-+ /* gpio pin assignment for uart1 */
-+ MCF_GPIO_PAR_UART1 =
-+ (MCF_GPIO_PAR_UART1 & MCF_GPIO_PAR_UART1_U1RXD_MASK) |
-+ MCF_GPIO_PAR_UART1_U1RXD_U1RXD;
-+ MCF_GPIO_PAR_UART1 =
-+ (MCF_GPIO_PAR_UART1 & MCF_GPIO_PAR_UART1_U1TXD_MASK) |
-+ MCF_GPIO_PAR_UART1_U1TXD_U1TXD;
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART2
-+ /* enable uart2 clock */
-+ MCF_PM_PPMCR0 = 26;
-+ /* gpio pin assignment for uart2 */
-+ MCF_GPIO_PAR_UART2 =
-+ (MCF_GPIO_PAR_UART2 & MCF_GPIO_PAR_UART2_U2RXD_MASK) |
-+ MCF_GPIO_PAR_UART2_U2RXD_U2RXD;
-+ MCF_GPIO_PAR_UART2 =
-+ (MCF_GPIO_PAR_UART2 & MCF_GPIO_PAR_UART2_U2TXD_MASK) |
-+ MCF_GPIO_PAR_UART2_U2TXD_U2TXD;
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART3
-+ /* enable uart3 clock */
-+ MCF_PM_PPMCR0 = 27;
-+ /* gpio pin assignment for uart3 */
-+ MCF_GPIO_PAR_DSPI0WH =
-+ (MCF_GPIO_PAR_DSPI0WH & MCF_GPIO_PAR_DSPI0_SIN_MASK) |
-+ MCF_GPIO_PAR_DSPI0_SIN_U3RXD;
-+ MCF_GPIO_PAR_DSPI0WH =
-+ (MCF_GPIO_PAR_DSPI0WH & MCF_GPIO_PAR_DSPI0_SOUT_MASK) |
-+ MCF_GPIO_PAR_DSPI0_SOUT_U3TXD;
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART4
-+ /* enable uart4 clock */
-+ MCF_PM_PPMCR1 = 24;
-+ /* gpio pin assignment for uart4 */
-+ MCF_GPIO_PAR_UART0 =
-+ (MCF_GPIO_PAR_UART0 & MCF_GPIO_PAR_UART0_U0RTS_MASK) |
-+ MCF_GPIO_PAR_UART0_U0RTS_U4RXD;
-+ MCF_GPIO_PAR_UART0 =
-+ (MCF_GPIO_PAR_UART0 & MCF_GPIO_PAR_UART0_U0CTS_MASK) |
-+ MCF_GPIO_PAR_UART0_U0CTS_U4TXD;
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART5
-+ /* enable uart5 clock */
-+ MCF_PM_PPMCR1 = 25;
-+ /* gpio pin assignment for uart5 */
-+ MCF_GPIO_PAR_UART1 =
-+ (MCF_GPIO_PAR_UART1 & MCF_GPIO_PAR_UART1_U1RTS_MASK) |
-+ MCF_GPIO_PAR_UART1_U1RTS_U5RXD;
-+ MCF_GPIO_PAR_UART1 =
-+ (MCF_GPIO_PAR_UART1 & MCF_GPIO_PAR_UART1_U1CTS_MASK) |
-+ MCF_GPIO_PAR_UART1_U1CTS_U5TXD;
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART6
-+ /* enable uart6 clock */
-+ MCF_PM_PPMCR1 = 26;
-+ /* gpio pin assignment for uart6 */
-+ MCF_GPIO_PAR_UART2 =
-+ (MCF_GPIO_PAR_UART2 & MCF_GPIO_PAR_UART2_U2RTS_MASK) |
-+ MCF_GPIO_PAR_UART2_U2RTS_U6RXD;
-+ MCF_GPIO_PAR_UART2 =
-+ (MCF_GPIO_PAR_UART2 & MCF_GPIO_PAR_UART2_U2CTS_MASK) |
-+ MCF_GPIO_PAR_UART2_U2CTS_U6TXD;
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART7
-+ /* enable uart7 clock */
-+ MCF_PM_PPMCR1 = 27;
-+ /* gpio pin assignment for uart7 */
-+ MCF_GPIO_PAR_SSI0H &= (MCF_GPIO_PAR_SSI0H_FS_MASK);
-+ MCF_GPIO_PAR_SSI0H |= (MCF_GPIO_PAR_SSI0H_FS_U7TXD);
-+ MCF_GPIO_PAR_SSI0L &= (MCF_GPIO_PAR_SSI0L_BCLK_MASK);
-+ MCF_GPIO_PAR_SSI0L |= (MCF_GPIO_PAR_SSI0L_BCLK_U7RXD);
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART8
-+ /* enable uart8 clock */
-+ MCF_PM_PPMCR1 = 28;
-+ /* gpio pin assignment for uart8 */
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_I2C0SCL_MASK) |
-+ MCF_GPIO_PAR_CANI2C_I2C0SCL_U8TXD;
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_I2C0SDA_MASK) |
-+ MCF_GPIO_PAR_CANI2C_I2C0SDA_U8RXD;
-+#endif
-+#ifdef CONFIG_SERIAL_MCF_UART9
-+ /* enable uart4 clock */
-+ MCF_PM_PPMCR1 = 29;
-+ /* gpio pin assignment for uart9 */
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_CAN1TX_MASK) |
-+ MCF_GPIO_PAR_CANI2C_CAN1TX_U9TXD;
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_CAN1RX_MASK) |
-+ MCF_GPIO_PAR_CANI2C_CAN1RX_U9RXD;
-+#endif
-+}
-+#endif
-+
-+#if defined(CONFIG_RTC_M5441X) || defined(CONFIG_RTC_M5441X_MODULE)
-+/*
-+ * RTC initialization
-+ */
-+static struct platform_device rtc_device = {
-+ .name = "rtc-m5441x",
-+ .id = -1,
-+};
-+
-+static void m5441x_rtc_init(void)
-+{
-+ /* Power management: enable RTC clock */
-+ MCF_PM_PPMCR0 = 42;
-+}
-+#endif
-+
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+static struct platform_device fsl_ssd1289_device = {
-+ .name = "fsl-ssd1289",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &fsl_ssd1289_data,
-+ },
-+};
-+#endif
-+
-+static struct platform_device *m5441x_devices[] __initdata = {
-+#if defined(CONFIG_SERIAL_MCF) || defined(CONFIG_SERIAL_MCF_MODULE)
-+ &m5441x_uart,
-+#endif
-+#if defined(CONFIG_RTC_M5441X) || defined(CONFIG_RTC_M5441X_MODULE)
-+ &rtc_device,
-+#endif
-+#if defined(CONFIG_MMC_ESDHC)
-+ &sd_mmc_esdhc_device,
-+#endif
-+#if defined(CONFIG_MTD_NAND_FSL_NFC)
-+ &nfc_device,
-+#endif
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ &fsl_ssd1289_device,
-+#endif
-+};
-+
-+static int __init mcf5441x_init_devices(void)
-+{
-+ printk(KERN_INFO "mcf5441x_init_devices: %s.\n", __func__);
-+
-+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-+#ifdef CONFIG_I2C_BOARDINFO
-+ i2c_register_board_info(0, mcf_i2c_devices,
-+ ARRAY_SIZE(mcf_i2c_devices));
-+#endif
-+ mcf5441x_init_i2c();
-+#endif
-+#if defined(CONFIG_SPI) || defined(CONFIG_SPI_MODULE)
-+ m5441x_spi_init();
-+#endif
-+#if defined(CONFIG_SERIAL_MCF) || defined(CONFIG_SERIAL_MCF_MODULE)
-+ m5441x_uarts_init();
-+#endif
-+#if defined(CONFIG_RTC_M5441X) || defined(CONFIG_RTC_M5441X_MODULE)
-+ m5441x_rtc_init();
-+#endif
-+ platform_add_devices(m5441x_devices, ARRAY_SIZE(m5441x_devices));
-+ return 0;
-+}
-+
-+arch_initcall(mcf5441x_init_devices);
-+
-+
---- /dev/null
-+++ b/arch/m68k/configs/m54418twr_defconfig
-@@ -0,0 +1,1244 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.29
-+# Fri Apr 23 14:36:43 2010
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+# CONFIG_TIME_LOW_RES is not set
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+
-+#
-+# RCU Subsystem
-+#
-+CONFIG_CLASSIC_RCU=y
-+# CONFIG_TREE_RCU is not set
-+# CONFIG_PREEMPT_RCU is not set
-+# CONFIG_TREE_RCU_TRACE is not set
-+# CONFIG_PREEMPT_RCU_TRACE is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+# CONFIG_CGROUPS is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_FREEZER is not set
-+
-+#
-+# Platform dependent setup
-+#
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+# CONFIG_FPU is not set
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+# CONFIG_SUN3 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+# CONFIG_M5445X is not set
-+CONFIG_HAVE_FSL_USB_DR=y
-+# CONFIG_M547X_8X is not set
-+CONFIG_M5441X=y
-+CONFIG_M54418=y
-+CONFIG_M54418EVB=y
-+CONFIG_MCFCLK=250000000
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x40000000
-+CONFIG_SDRAM_SIZE=0x08000000
-+CONFIG_NOR_FLASH_BASE=0x00000000
-+CONFIG_DMA_BASE=0xdf000000
-+CONFIG_DMA_SIZE=0x1000000
-+# CONFIG_VDSO is not set
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_UNEVICTABLE_LRU=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_COMPAT_NET_DEV_OPS=y
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+# CONFIG_DCB is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+# CONFIG_PHONET is not set
-+CONFIG_WIRELESS=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_OLD_REGULATORY=y
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_LIB80211 is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_WIMAX is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+# CONFIG_KLIPS is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+CONFIG_FIRMWARE_IN_KERNEL=y
-+CONFIG_EXTRA_FIRMWARE=""
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_TESTS is not set
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+CONFIG_MTD_M25P80=y
-+CONFIG_M25PXX_USE_FAST_READ=y
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+CONFIG_MTD_BLOCK2MTD=y
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+CONFIG_MTD_NAND_FSL_NFC=y
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# LPDDR flash memory drivers
-+#
-+# CONFIG_MTD_LPDDR is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_BLK_DEV_HD is not set
-+# CONFIG_MISC_DEVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_LIBFC is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_DH is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_BROADCOM5222_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_NATIONAL_PHY is not set
-+CONFIG_NATIONAL8364x_PHY=y
-+CONFIG_NATIONAL8384x_PHY=y
-+CONFIG_MicrelKSZ8041_PHY=y
-+# CONFIG_STE10XP is not set
-+# CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_DNET is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-+# CONFIG_B44 is not set
-+CONFIG_FEC=y
-+CONFIG_FEC2=y
-+CONFIG_FEC_SHARED_PHY=y
-+# CONFIG_MODELO_SWITCH is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
-+#
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_LIBPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+# CONFIG_SERIAL_COLDFIRE_EDMA is not set
-+CONFIG_SERIAL_MCF=y
-+CONFIG_SERIAL_MCF_BAUDRATE=115200
-+CONFIG_SERIAL_MCF_CONSOLE=y
-+CONFIG_SERIAL_MCF_UART0=y
-+# CONFIG_SERIAL_MCF_UART1 is not set
-+# CONFIG_SERIAL_MCF_UART2 is not set
-+# CONFIG_SERIAL_MCF_UART3 is not set
-+# CONFIG_SERIAL_MCF_UART4 is not set
-+# CONFIG_SERIAL_MCF_UART5 is not set
-+# CONFIG_SERIAL_MCF_UART6 is not set
-+# CONFIG_SERIAL_MCF_UART7 is not set
-+# CONFIG_SERIAL_MCF_UART8 is not set
-+# CONFIG_SERIAL_MCF_UART9 is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_I2C is not set
-+CONFIG_SPI=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+CONFIG_SPI_DSPI=y
-+# CONFIG_SPI_COLDFIRE_DSPI_EDMA is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_COLDFIRE_WATCHDOG=y
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_REGULATOR is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_SOUND is not set
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+CONFIG_USB_SUSPEND=y
-+CONFIG_USB_OTG=y
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MON is not set
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=m
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-+CONFIG_USB_EHCI_FSL=y
-+# CONFIG_USB_OXU210HP_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+# CONFIG_USB_M5445X_ULPI is not set
-+# CONFIG_USB_M5445X_FSLS is not set
-+CONFIG_USB_M5441X_ULPI=y
-+# CONFIG_USB_M5441X_FSLS is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+#
-+
-+#
-+# see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_VST is not set
-+CONFIG_USB_GADGET=m
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_VBUS_DRAW=2
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+CONFIG_USB_GADGET_FSL_USB2=y
-+CONFIG_USB_FSL_USB2=m
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_IMX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_FSL_QE is not set
-+# CONFIG_USB_GADGET_CI13XXX is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+# CONFIG_USB_ZERO is not set
-+# CONFIG_USB_ETH is not set
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+CONFIG_USB_FILE_STORAGE_TEST=y
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD/SDIO Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD/SDIO Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_MMC_ESDHC is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_DS1390 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_DS3234 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1286 is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T35 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_RTC_MCF is not set
-+CONFIG_RTC_M5441X=y
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+CONFIG_COLDFIRE_EDMA=y
-+CONFIG_COLDFIRE_EDMA_TEST=m
-+# CONFIG_UIO is not set
-+# CONFIG_STAGING is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_BTRFS_FS is not set
-+CONFIG_DNOTIFY=y
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+CONFIG_MISC_FILESYSTEMS=y
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_SQUASHFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_REGISTER_V4 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-+
-+#
-+# Tracers
-+#
-+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_SAMPLES is not set
-+# CONFIG_BOOTPARAM is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+# CONFIG_CRYPTO_FIPS is not set
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_AEAD2=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_BLKCIPHER2=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+CONFIG_CRYPTO_TEST=m
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=y
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+
-+#
-+# OCF Configuration
-+#
-+# CONFIG_OCF_OCF is not set
-+
-+#
-+# Talitos Driver
-+#
-+CONFIG_CRYPTO_HW=y
-+# CONFIG_CRYPTO_DEV_MCFCAU is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_GENERIC_FIND_LAST_BIT=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+CONFIG_CRC_ITU_T=y
-+CONFIG_CRC32=y
-+CONFIG_CRC7=y
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/include/asm/cf_5441x_cacheflush.h
-@@ -0,0 +1,527 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Based on include/asm-m68k/cacheflush.h
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef M68K_CF_5441x_CACHEFLUSH_H
-+#define M68K_CF_5441x_CACHEFLUSH_H
-+
-+#include <asm/cfcache.h>
-+
-+/*
-+ * Coldfire Cache Model
-+ *
-+ * The Coldfire processors use a Harvard architecture cache configured
-+ * as four-way set associative. The cache does not implement bus snooping
-+ * so cache coherency with other masters must be maintained in software.
-+ *
-+ * The cache is managed via the CPUSHL instruction in conjunction with
-+ * bits set in the CACR (cache control register). Currently the code
-+ * uses the CPUSHL enhancement which adds the ability to
-+ * invalidate/clear/push a cacheline by physical address. This feature
-+ * is designated in the Hardware Configuration Register [D1-CPES].
-+ *
-+ * CACR Bits:
-+ * DPI[28] cpushl invalidate disable for d-cache
-+ * IDPI[12] cpushl invalidate disable for i-cache
-+ * SPA[14] cpushl search by physical address
-+ * IVO[20] cpushl invalidate only
-+ *
-+ * Random Terminology:
-+ * * invalidate = reset the cache line's valid bit
-+ * * push = generate a line-sized store of the data if its contents are
-+ * marked as modifed (the modified flag is cleared after
-+ * the store)
-+ * * clear = push + invalidate
-+ */
-+
-+/**
-+ * flush_icache - Flush all of the instruction cache
-+ */
-+static inline void flush_icache(void)
-+{
-+ asm volatile("nop\n"
-+ "moveq%.l #0,%%d0\n"
-+ "moveq%.l #0,%%d1\n"
-+ "move%.l %%d0,%%a0\n"
-+ "1:\n"
-+ "cpushl %%ic,(%%a0)\n"
-+ "add%.l #0x0010,%%a0\n"
-+ "addq%.l #1,%%d1\n"
-+ "cmpi%.l %0,%%d1\n"
-+ "bne 1b\n"
-+ "moveq%.l #0,%%d1\n"
-+ "addq%.l #1,%%d0\n"
-+ "move%.l %%d0,%%a0\n"
-+ "cmpi%.l #4,%%d0\n"
-+ "bne 1b\n"
-+ : : "i" (CACHE_SETS)
-+ : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * flush_dcache - Flush all of the data cache
-+ */
-+static inline void flush_dcache(void)
-+{
-+ asm volatile("nop\n"
-+ "moveq%.l #0,%%d0\n"
-+ "moveq%.l #0,%%d1\n"
-+ "move%.l %%d0,%%a0\n"
-+ "1:\n"
-+ "cpushl %%dc,(%%a0)\n"
-+ "add%.l #0x0010,%%a0\n"
-+ "addq%.l #1,%%d1\n"
-+ "cmpi%.l %0,%%d1\n"
-+ "bne 1b\n"
-+ "moveq%.l #0,%%d1\n"
-+ "addq%.l #1,%%d0\n"
-+ "move%.l %%d0,%%a0\n"
-+ "cmpi%.l #4,%%d0\n"
-+ "bne 1b\n"
-+ : : "i" (CACHE_SETS)
-+ : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * flush_bcache - Flush all of both caches
-+ */
-+static inline void flush_bcache(void)
-+{
-+ asm volatile("nop\n"
-+ "moveq%.l #0,%%d0\n"
-+ "moveq%.l #0,%%d1\n"
-+ "move%.l %%d0,%%a0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "add%.l #0x0010,%%a0\n"
-+ "addq%.l #1,%%d1\n"
-+ "cmpi%.l %0,%%d1\n"
-+ "bne 1b\n"
-+ "moveq%.l #0,%%d1\n"
-+ "addq%.l #1,%%d0\n"
-+ "move%.l %%d0,%%a0\n"
-+ "cmpi%.l #4,%%d0\n"
-+ "bne 1b\n"
-+ : : "i" (CACHE_SETS)
-+ : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * cf_cache_clear - invalidate cache
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Invalidate cache lines starting at paddr for len bytes.
-+ * Those lines are not pushed.
-+ */
-+static inline void cf_cache_clear(unsigned long paddr, int len)
-+{
-+ /* number of lines */
-+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+ if (len == 0)
-+ return;
-+
-+ /* align on set boundary */
-+ paddr &= 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%d0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "subq%.l #1,%%d0\n"
-+ "bne%.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : : "a" (paddr), "r" (len),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA+CF_CACR_IVO)
-+ : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_push - Push dirty cache out with no invalidate
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Push the any dirty lines starting at paddr for len bytes.
-+ * Those lines are not invalidated.
-+ */
-+static inline void cf_cache_push(unsigned long paddr, int len)
-+{
-+ /* number of lines */
-+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+ if (len == 0)
-+ return;
-+
-+ /* align on set boundary */
-+ paddr &= 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%d0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "subq%.l #1,%%d0\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : : "a" (paddr), "r" (len),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA+CF_CACR_DPI+CF_CACR_IDPI)
-+ : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_flush - Push dirty cache out and invalidate
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Push the any dirty lines starting at paddr for len bytes and
-+ * invalidate those lines.
-+ */
-+static inline void cf_cache_flush(unsigned long paddr, int len)
-+{
-+ /* number of lines */
-+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+ if (len == 0)
-+ return;
-+
-+ /* align on set boundary */
-+ paddr &= 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%d0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "subq%.l #1,%%d0\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : : "a" (paddr), "r" (len),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA)
-+ : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_flush_range - Push dirty data/inst cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the any dirty data/instr lines starting at paddr for len bytes and
-+ * invalidate those lines.
-+ */
-+static inline void cf_cache_flush_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ int len;
-+
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0;
-+ len = vend - vstart;
-+ if (len == 0)
-+ return;
-+ vstart = __pa(vstart);
-+ vend = vstart + len;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (vstart), "a" (vend),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_dcache_flush_range - Push dirty data cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push/Clear the virtual range *vstart* -> *vend* using the enhanced
-+ * cpushl instruction to search by physical address.
-+ *
-+ * Assumes CACR[IVO] is 0
-+ * CACR[DDPI] is 0
-+ *
-+ * Sets CACR[SPA] to 1 for the duration of this routine
-+ */
-+static inline void cf_dcache_flush_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%dc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (__pa(vstart)), "a" (__pa(vend)),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_dcache_inv_range - Invalidate data cache in range
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Invalidate the virtual range *vstart* -> *vend* using the enhanced
-+ * cpushl instruction to search by physical address.
-+ *
-+ * Assumes CACR[DDPI] is 0
-+ *
-+ * Sets CACR[SPA] and CACR[IVO] to 1 for the duration of this routine
-+ */
-+static inline void cf_dcache_inv_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%dc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (__pa(vstart)), "a" (__pa(vend)),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA | CF_CACR_IVO)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_dcache_push_range - Push data cache in range
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the virtual range *vstart* -> *vend* using the enhanced
-+ * cpushl instruction to search by physical address.
-+ *
-+ * Assumes CACR[IVO] is 0
-+ *
-+ * Sets CACR[SPA] and CACR[DDPI] to 1 for the duration of this routine
-+ */
-+static inline void cf_dcache_push_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%dc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (__pa(vstart)), "a" (__pa(vend)),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA | CF_CACR_DPI)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_icache_flush_range - Push dirty inst cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the any dirty instr lines starting at paddr for len bytes and
-+ * invalidate those lines. This should just be an invalidate since you
-+ * shouldn't be able to have dirty instruction cache.
-+ */
-+static inline void cf_icache_flush_range(unsigned long vstart,
-+ unsigned long vend)
-+{
-+ /* align on set boundary */
-+ vstart &= 0xfffffff0;
-+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%a0\n"
-+ "move%.l %1,%%a1\n"
-+ "1:\n"
-+ "cpushl %%ic,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "cmpa%.l %%a0,%%a1\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : /* no return */
-+ : "a" (__pa(vstart)), "a" (__pa(vend)),
-+ "r" (shadow_cacr),
-+ "i" (CF_CACR_SPA)
-+ : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * flush_cache_mm - Flush an mm_struct
-+ * @mm: mm_struct to flush
-+ */
-+static inline void flush_cache_mm(struct mm_struct *mm)
-+{
-+ if (mm == current->mm)
-+ flush_bcache();
-+}
-+
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-+
-+/**
-+ * flush_cache_range - Flush a cache range
-+ * @vma: vma struct
-+ * @start: Starting address
-+ * @end: Ending address
-+ *
-+ * flush_cache_range must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_range(struct vm_area_struct *vma,
-+ unsigned long start, unsigned long end)
-+{
-+ if (vma->vm_mm == current->mm)
-+ cf_cache_flush_range(start, end);
-+}
-+
-+/**
-+ * flush_cache_page - Flush a page of the cache
-+ * @vma: vma struct
-+ * @vmaddr:
-+ * @pfn: page numer
-+ *
-+ * flush_cache_page must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_page(struct vm_area_struct *vma,
-+ unsigned long vmaddr, unsigned long pfn)
-+{
-+ if (vma->vm_mm == current->mm)
-+ cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
-+}
-+
-+/**
-+ * __flush_page_to_ram - Push a page out of the cache
-+ * @vaddr: Virtual address at start of page
-+ *
-+ * Push the page at kernel virtual address *vaddr* and clear
-+ * the icache.
-+ */
-+static inline void __flush_page_to_ram(void *vaddr)
-+{
-+ asm volatile("nop\n"
-+ "move%.l %2,%%d0\n"
-+ "or%.l %3,%%d0\n"
-+ "movec %%d0,%%cacr\n"
-+ "move%.l %0,%%d0\n"
-+ "and%.l #0xfffffff0,%%d0\n"
-+ "move%.l %%d0,%%a0\n"
-+ "move%.l %1,%%d0\n"
-+ "1:\n"
-+ "cpushl %%bc,(%%a0)\n"
-+ "lea 0x10(%%a0),%%a0\n"
-+ "subq%.l #1,%%d0\n"
-+ "bne.b 1b\n"
-+ "movec %2,%%cacr\n"
-+ : : "a" (__pa(vaddr)), "i" (PAGE_SIZE / CACHE_LINE_SIZE),
-+ "r" (shadow_cacr), "i" (CF_CACR_SPA)
-+ : "a0", "d0");
-+}
-+
-+/*
-+ * Various defines for the kernel.
-+ */
-+
-+extern void cache_clear(unsigned long paddr, int len);
-+extern void cache_push(unsigned long paddr, int len);
-+extern void flush_icache_range(unsigned long address, unsigned long endaddr);
-+
-+#define flush_cache_all() flush_bcache()
-+#define flush_cache_vmap(start, end) flush_bcache()
-+#define flush_cache_vunmap(start, end) flush_bcache()
-+
-+#define flush_dcache_range(vstart, vend) cf_dcache_flush_range(vstart, vend)
-+#define flush_dcache_page(page) __flush_page_to_ram(page_address(page))
-+#define flush_dcache_mmap_lock(mapping) do { } while (0)
-+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-+
-+#define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page))
-+
-+/**
-+ * copy_to_user_page - Copy memory to user page
-+ */
-+static inline void copy_to_user_page(struct vm_area_struct *vma,
-+ struct page *page, unsigned long vaddr,
-+ void *dst, void *src, int len)
-+{
-+ memcpy(dst, src, len);
-+ cf_cache_flush(page_to_phys(page), PAGE_SIZE);
-+}
-+
-+/**
-+ * copy_from_user_page - Copy memory from user page
-+ */
-+static inline void copy_from_user_page(struct vm_area_struct *vma,
-+ struct page *page, unsigned long vaddr,
-+ void *dst, void *src, int len)
-+{
-+ cf_cache_flush(page_to_phys(page), PAGE_SIZE);
-+ memcpy(dst, src, len);
-+}
-+
-+#endif /* M68K_CF_5441x_CACHEFLUSH_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_ccm.h
-@@ -0,0 +1,157 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_CCM_H__
-+#define __MCF5441X_CCM_H__
-+
-+/*********************************************************************
-+*
-+* Chip Configuration Module (CCM)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+/* Chip Configuration Register (Read-only) (256 or 360 TEPBGA) */
-+#define MCF_CCM_CCR MCF_REG16(0xEC090004)
-+/* Reset Configuration (Read-only) (256 or 360 TEPBGA) */
-+#define MCF_CCM_RCON MCF_REG16(0xEC090008)
-+/* Chip Identification Register (Read-only) */
-+#define MCF_CCM_CIR MCF_REG16(0xEC09000A)
-+/* Miscellaneous Control Register */
-+#define MCF_CCM_MISCCR MCF_REG16(0xEC09000E)
-+#define MCF_CCM_CDRH MCF_REG16(0xEC090010) /* Clock Divider Register */
-+#define MCF_CCM_CDRL MCF_REG16(0xEC090012) /* Clock Divider Register */
-+/* USB On-the-Go Controller Status Register */
-+#define MCF_CCM_UOCSR MCF_REG16(0xEC090014)
-+/* USB On-the-Go Controller Status Register */
-+#define MCF_CCM_UHCSR MCF_REG16(0xEC090016)
-+/* Miscellaneous Control Register */
-+#define MCF_CCM_MISCCR3 MCF_REG16(0xEC090018)
-+/* Miscellaneous Control Register */
-+#define MCF_CCM_MISCCR2 MCF_REG16(0xEC09001A)
-+#define MCF_CCM_ADCTSR MCF_REG16(0xEC09001C)
-+#define MCF_CCM_DACTSR MCF_REG16(0xEC09001E)
-+/* Serial Boot Facility Status Register (Read Only) */
-+#define MCF_CCM_SBFSR MCF_REG16(0xEC090020)
-+/* Serial Boot Facility Control Register */
-+#define MCF_CCM_SBFCR MCF_REG16(0xEC090022)
-+#define MCF_CCM_FNACR MCF_REG16(0xEC090024)
-+
-+/* Bit definitions and macros for CIR */
-+/* Part revision number */
-+#define MCF_CCM_CIR_PRN(x) (((x) & 0x003F))
-+/* Part identification number */
-+#define MCF_CCM_CIR_PIN(x) (((x) & 0x03FF) << 6)
-+#define MCF_CCM_CIR_PIN_MASK (0xFFC0)
-+#define MCF_CCM_CIR_PRN_MASK (0x003F)
-+#define MCF_CCM_CIR_PIN_MCF54410 (0x9F<<6)
-+#define MCF_CCM_CIR_PIN_MCF54415 (0xA0<<6)
-+#define MCF_CCM_CIR_PIN_MCF54416 (0xA1<<6)
-+#define MCF_CCM_CIR_PIN_MCF54417 (0xA2<<6)
-+#define MCF_CCM_CIR_PIN_MCF54418 (0xA3<<6)
-+
-+/* Bit definitions and macros for MISCCR */
-+/* Part revision number */
-+#define MCF_CCM_CIR_PRN(x) (((x) & 0x003F))
-+/* Part identification number */
-+#define MCF_CCM_CIR_PIN(x) (((x) & 0x03FF) << 6)
-+#define MCF_CCM_CIR_PIN_MASK (0xFFC0)
-+#define MCF_CCM_CIR_PRN_MASK (0x003F)
-+#define MCF_CCM_CIR_PIN_MCF54410 (0x9F<<6)
-+#define MCF_CCM_CIR_PIN_MCF54415 (0xA0<<6)
-+#define MCF_CCM_CIR_PIN_MCF54416 (0xA1<<6)
-+#define MCF_CCM_CIR_PIN_MCF54417 (0xA2<<6)
-+#define MCF_CCM_CIR_PIN_MCF54418 (0xA3<<6)
-+#define MCF_CCM_MISCCR_PWM_EXTCLK(x) (((x)&(0x0003)<<14)
-+#define MCF_CCM_MISCCR_PWM_EXTCLK_MASK (0x3FFF)
-+#define MCF_CCM_MISCCR_PWM_EXTCLK_TMR0 (0x0000)
-+#define MCF_CCM_MISCCR_PWM_EXTCLK_TMR1 (0x4000)
-+#define MCF_CCM_MISCCR_PWM_EXTCLK_TMR2 (0x8000)
-+#define MCF_CCM_MISCCR_PWM_EXTCLK_TMR3 (0xC000)
-+#define MCF_CCM_MISCCR_LIMP (0x1000)
-+#define MCF_CCM_MISCCR_BME (0x0800)
-+#define MCF_CCM_MISCCR_BMT(x) (((x)&0x0007)<<8)
-+#define MCF_CCM_MISCCR_BMT_MASK (0xF8FF)
-+#define MCF_CCM_MISCCR_BMT_65536 (0)
-+#define MCF_CCM_MISCCR_BMT_32768 (1)
-+#define MCF_CCM_MISCCR_BMT_16384 (2)
-+#define MCF_CCM_MISCCR_BMT_8192 (3)
-+#define MCF_CCM_MISCCR_BMT_4096 (4)
-+#define MCF_CCM_MISCCR_BMT_2048 (5)
-+#define MCF_CCM_MISCCR_BMT_1024 (6)
-+#define MCF_CCM_MISCCR_BMT_512 (7)
-+#define MCF_CCM_MISCCR_SDHCSRC (0x0040)
-+#define MCF_CCM_MISCCR_SSI1SRC (0x0020)
-+#define MCF_CCM_MISCCR_SSI0SRC (0x0010)
-+#define MCF_CCM_MISCCR_USBHOC (0x0008)
-+#define MCF_CCM_MISCCR_USBOOC (0x0004)
-+#define MCF_CCM_MISCCR_USBPUE (0x0002)
-+#define MCF_CCM_MISCCR_USBSRC (0x0001)
-+#define MCF_CCM_CDRH_SSI0DIV(x) (((x)&0x00FF)<<8)
-+#define MCF_CCM_CDRH_SSI0DIV_MASK (0x00FF)
-+#define MCF_CCM_CDRH_SSI1DIV(x) (((x)&0x00FF))
-+#define MCF_CCM_CDRH_SSI1DIV_MASK (0xFF00)
-+#define MCF_CCM_CDRL_LPDIV(x) (((x)&0x000F)<<8)
-+#define MCF_CCM_CDRL_LPDIV_MASK (0xFF0F)
-+#define MCF_CCM_CDR_LPDIV(x) CCM_CDRL_LPDIV(x)
-+
-+#define MCF_CCM_UOCSR_DPPD (0x2000)
-+#define MCF_CCM_UOCSR_DMPD (0x1000)
-+#define MCF_CCM_UOCSR_DRV_VBUS (0x0800)
-+#define MCF_CCM_UOCSR_CRG_VBUS (0x0400)
-+#define MCF_CCM_UOCSR_DCR_VBUS (0x0200)
-+#define MCF_CCM_UOCSR_DPPU (0x0100)
-+#define MCF_CCM_UOCSR_AVLD (0x0080)
-+#define MCF_CCM_UOCSR_BVLD (0x0040)
-+#define MCF_CCM_UOCSR_VVLD (0x0020)
-+#define MCF_CCM_UOCSR_SEND (0x0010)
-+#define MCF_CCM_UOCSR_PWRFLT (0x0008)
-+#define MCF_CCM_UOCSR_WKUP (0x0004)
-+#define MCF_CCM_UOCSR_UOMIE (0x0002)
-+#define MCF_CCM_UOCSR_XPDE (0x0001)
-+
-+#define MCF_CCM_UHCSR_DRV_VBUS (0x0010)
-+#define MCF_CCM_UHCSR_PWRFLT (0x0008)
-+#define MCF_CCM_UHCSR_WKUP (0x0004)
-+#define MCF_CCM_UHCSR_UOMIE (0x0002)
-+#define MCF_CCM_UHCSR_XPDE (0x0001)
-+
-+#define MCF_CCM_MISCCR3_TMR_ENET (0x1000)
-+#define MCF_CCM_MISCCR3_ENETCLK(x) ((((x)&7))<<8)
-+#define MCF_CCM_MISCCR3_ENETCLK_MASK (0xF8FF)
-+#define MCF_CCM_MISCCR3_ENETCLK_MII (0x0700)
-+#define MCF_CCM_MISCCR3_ENETCLK_OSC (0x0600)
-+#define MCF_CCM_MISCCR3_ENETCLK_USB (0x0500)
-+#define MCF_CCM_MISCCR3_ENETCLK_TMR3 (0x0400)
-+#define MCF_CCM_MISCCR3_ENETCLK_TMR2 (0x0300)
-+#define MCF_CCM_MISCCR3_ENETCLK_TMR1 (0x0200)
-+#define MCF_CCM_MISCCR3_ENETCLK_TMR0 (0x0100)
-+#define MCF_CCM_MISCCR3_ENETCLK_INTBUS (0x0000)
-+
-+#define MCF_CCM_MISCCR2_EXTCLKBYP (0x0800)
-+#define MCF_CCM_MISCCR2_DDR2CLK (0x0400)
-+#define MCF_CCM_MISCCR2_RGPIO_HALF (0x0200)
-+#define MCF_CCM_MISCCR2_SWTSCR (0x0100)
-+#define MCF_CCM_MISCCR2_PLLMODE(x) (((x)&7)<<8)
-+#define MCF_CCM_MISCCR2_PLLMODE_MASK (0xF8FF)
-+#define MCF_CCM_MISCCR2_DCCBYP (0x0080)
-+#define MCF_CCM_MISCCR2_DAC1SEL (0x0040)
-+#define MCF_CCM_MISCCR2_DAC0SEL (0x0020)
-+#define MCF_CCM_MISCCR2_ADCEN (0x0010)
-+#define MCF_CCM_MISCCR2_ADC7SEL (0x0008)
-+#define MCF_CCM_MISCCR2_ADC3SEL (0x0004)
-+#define MCF_CCM_MISCCR2_FBHALF (0x0002)
-+#define MCF_CCM_MISCCR2_ULPI (0x0001)
-+
-+#define MCF_CCM_FNACR_PCR(x) (((x)&0x0F)<<24)
-+#define MCF_CCM_FNACR_PCR_MASK (0xF0FFFFFF)
-+#define MCF_CCM_FNACR_MCC(x) ((x)&0xFFFF)
-+#define MCF_CCM_FNACR_MCC_MASK (0xFFFF0000)
-+
-+#endif /* __MCF5445X_CCM_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_clock.h
-@@ -0,0 +1,22 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_CLOCK_H__
-+#define __MCF5441X_CLOCK_H__
-+
-+#define MCF_PLL_CR MCF_REG32(0xFC000000)
-+#define MCF_PLL_DR MCF_REG32(0xFC000004)
-+#define MCF_PLL_SR MCF_REG32(0xFC000008)
-+
-+#define MCF_PLL_DR_OUTDIV4 0x001F0000
-+#define MCF_PLL_DR_OUTDIV1 0x1F
-+
-+
-+#endif /*__MCF5441X_CLOCK_H__*/
-+
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_dspi.h
-@@ -0,0 +1,671 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Lanttor.Guo@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_DSPI_H__
-+#define __MCF5441X_DSPI_H__
-+
-+/*********************************************************************
-+*
-+* DMA Serial Peripheral Interface (DSPI)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+/* DSPI Module Configuration Register */
-+#define MCF_DSPI_DMCR MCF_REG32(0xFC05C000)
-+#define MCF_DSPI1_DMCR MCF_REG32(0xFC03C000)
-+/* DSPI Transfer Count Register */
-+#define MCF_DSPI_DTCR MCF_REG32(0xFC05C008)
-+#define MCF_DSPI1_DTCR MCF_REG32(0xFC03C008)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR0 MCF_REG32(0xFC05C00C)
-+#define MCF_DSPI1_DCTAR0 MCF_REG32(0xFC03C00C)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR1 MCF_REG32(0xFC05C010)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR2 MCF_REG32(0xFC05C014)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR3 MCF_REG32(0xFC05C018)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR4 MCF_REG32(0xFC05C01C)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR5 MCF_REG32(0xFC05C020)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR6 MCF_REG32(0xFC05C024)
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR7 MCF_REG32(0xFC05C028
-+/* DSPI Status Register */
-+#define MCF_DSPI_DSR MCF_REG32(0xFC05C02C)
-+#define MCF_DSPI1_DSR MCF_REG32(0xFC03C02C)
-+/* DSPI DMA/Interrupt Request Select and Enable Register */
-+#define MCF_DSPI_DRSER MCF_REG32(0xFC05C030)
-+#define MCF_DSPI1_DRSER MCF_REG32(0xFC03C030)
-+/* DSPI Transmit FIFO Register */
-+#define MCF_DSPI_DTFR MCF_REG32(0xFC05C034)
-+#define MCF_DSPI1_DTFR MCF_REG32(0xFC03C034)
-+/* DSPI Receive FIFO Register */
-+#define MCF_DSPI_DRFR MCF_REG32(0xFC05C038)
-+#define MCF_DSPI1_DRFR MCF_REG32(0xFC03C038)
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR0 MCF_REG32(0xFC05C03C)
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR1 MCF_REG32(0xFC05C040)
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR2 MCF_REG32(0xFC05C044)
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR3 MCF_REG32(0xFC05C048)
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR0 MCF_REG32(0xFC05C07C)
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR1 MCF_REG32(0xFC05C080)
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR2 MCF_REG32(0xFC05C084)
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR3 MCF_REG32(0xFC05C088)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR(x) MCF_REG32(0xFC05C00C+((x)*0x004))
-+/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR(x) MCF_REG32(0xFC05C03C+((x)*0x004))
-+/* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR(x) MCF_REG32(0xFC05C07C+((x)*0x004))
-+
-+/* Bit definitions and macros for DMCR */
-+/* Halt -- stops and starts DSPI transfers */
-+#define MCF_DSPI_DMCR_HALT (0x00000001)
-+/* Sample point selection */
-+#define MCF_DSPI_DMCR_SMPLPT(x) (((x)&0x00000003)<<8)
-+/* Clear receive FIFO */
-+#define MCF_DSPI_DMCR_CLRRXF (0x00000400)
-+/* Clear transmit FIFO */
-+#define MCF_DSPI_DMCR_CLRTXF (0x00000800)
-+/* Disable receive FIFO */
-+#define MCF_DSPI_DMCR_DISRXF (0x00001000)
-+/* Disable transmit FIFO */
-+#define MCF_DSPI_DMCR_DISTXF (0x00002000)
-+/* Module Disable */
-+#define MCF_DSPI_DMCR_MDIS (0x00004000)
-+/* Peripheral chip-select 0 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS0 (0x00010000)
-+/* Peripheral chip-select 1 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS1 (0x00020000)
-+/* Peripheral chip-select 2 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS2 (0x00040000)
-+/* Peripheral chip-select 3 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS3 (0x00080000)
-+/* Peripheral chip-select 4 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS4 (0x00100000)
-+/* Peripheral chip-select 5 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS5 (0x00200000)
-+/* Peripheral chip-select 6 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS6 (0x00400000)
-+/* Peripheral chip-select 7 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS7 (0x00800000)
-+/* Receive FIFO overflow overwrite enable */
-+#define MCF_DSPI_DMCR_ROOE (0x01000000)
-+/* Peripheral chip select strobe enable */
-+#define MCF_DSPI_DMCR_PCSSE (0x02000000)
-+/* Modified timing format enable */
-+#define MCF_DSPI_DMCR_MTFE (0x04000000)
-+/* Freeze */
-+#define MCF_DSPI_DMCR_FRZ (0x08000000)
-+/* DSPI configuration */
-+#define MCF_DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28)
-+/* Continuous SCK enable */
-+#define MCF_DSPI_DMCR_CONT_SCKE (0x40000000)
-+/* Master/Slave mode select */
-+#define MCF_DSPI_DMCR_MSTR (0x80000000)
-+#define MCF_DSPI_DMCR_DCONF_SPI (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS7_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS7_HIGH (0x00800000)
-+#define MCF_DSPI_DMCR_PCSIS6_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS6_HIGH (0x00400000)
-+#define MCF_DSPI_DMCR_PCSIS5_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS5_HIGH (0x00200000)
-+#define MCF_DSPI_DMCR_PCSIS4_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS4_HIGH (0x00100000)
-+#define MCF_DSPI_DMCR_PCSIS3_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS3_HIGH (0x00080000)
-+#define MCF_DSPI_DMCR_PCSIS2_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS2_HIGH (0x00040000)
-+#define MCF_DSPI_DMCR_PCSIS1_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS1_HIGH (0x00020000)
-+#define MCF_DSPI_DMCR_PCSIS0_LOW (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS0_HIGH (0x00010000)
-+
-+/* Bit definitions and macros for DTCR */
-+/* SPI transfer count */
-+#define MCF_DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for DCTAR group */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR_DBR (0x80000000)
-+#define MCF_DSPI_DCTAR_CPOL_LOW (0x00000000)
-+#define MCF_DSPI_DCTAR_CPOL_HIGH (0x04000000)
-+#define MCF_DSPI_DCTAR_CPHA_LATCH_RISING (0x00000000)
-+#define MCF_DSPI_DCTAR_CPHA_LATCH_FALLING (0x02000000)
-+#define MCF_DSPI_DCTAR_PCSSCK_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PCSSCK_3CLK (0x00400000)
-+#define MCF_DSPI_DCTAR_PCSSCK_5CLK (0x00800000)
-+#define MCF_DSPI_DCTAR_PCSSCK_7CLK (0x00C00000)
-+#define MCF_DSPI_DCTAR_PASC_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PASC_3CLK (0x00100000)
-+#define MCF_DSPI_DCTAR_PASC_5CLK (0x00200000)
-+#define MCF_DSPI_DCTAR_PASC_7CLK (0x00300000)
-+#define MCF_DSPI_DCTAR_PDT_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PDT_3CLK (0x00040000)
-+#define MCF_DSPI_DCTAR_PDT_5CLK (0x00080000)
-+#define MCF_DSPI_DCTAR_PDT_7CLK (0x000C0000)
-+#define MCF_DSPI_DCTAR_PBR_2CLK (0x00000000)
-+#define MCF_DSPI_DCTAR_PBR_3CLK (0x00010000)
-+#define MCF_DSPI_DCTAR_PBR_5CLK (0x00020000)
-+#define MCF_DSPI_DCTAR_PBR_7CLK (0x00030000)
-+
-+/* Bit definitions and macros for DCTAR0 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR0_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR0_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR0_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR0_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR0_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR0_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR0_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR0_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR0_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR0_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR0_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR0_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR0_DBR (0x80000000)
-+#define MCF_DSPI_DCTAR0_CPOL_LOW (0x00000000)
-+#define MCF_DSPI_DCTAR0_CPOL_HIGH (0x04000000)
-+#define MCF_DSPI_DCTAR0_CPHA_LATCH_RISING (0x00000000)
-+#define MCF_DSPI_DCTAR0_CPHA_LATCH_FALLING (0x02000000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_3CLK (0x00400000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_5CLK (0x00800000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_7CLK (0x00C00000)
-+#define MCF_DSPI_DCTAR0_PASC_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR0_PASC_3CLK (0x00100000)
-+#define MCF_DSPI_DCTAR0_PASC_5CLK (0x00200000)
-+#define MCF_DSPI_DCTAR0_PASC_7CLK (0x00300000)
-+#define MCF_DSPI_DCTAR0_PDT_1CLK (0x00000000)
-+#define MCF_DSPI_DCTAR0_PDT_3CLK (0x00040000)
-+#define MCF_DSPI_DCTAR0_PDT_5CLK (0x00080000)
-+#define MCF_DSPI_DCTAR0_PDT_7CLK (0x000C0000)
-+#define MCF_DSPI_DCTAR0_PBR_2CLK (0x00000000)
-+#define MCF_DSPI_DCTAR0_PBR_3CLK (0x00010000)
-+#define MCF_DSPI_DCTAR0_PBR_5CLK (0x00020000)
-+#define MCF_DSPI_DCTAR0_PBR_7CLK (0x00030000)
-+
-+/* Bit definitions and macros for DCTAR1 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR1_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR1_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR1_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR1_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR1_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR1_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR1_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR1_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR1_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR1_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR1_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR1_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR1_DBR (0x80000000)
-+
-+
-+/* Bit definitions and macros for DCTAR2 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR2_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR2_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR2_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR2_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR2_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR2_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR2_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR2_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR2_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR2_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR2_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR2_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR2_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR3 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR3_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR3_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR3_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR3_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR3_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR3_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR3_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR3_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR3_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR3_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR3_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR3_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR3_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR4 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR4_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR4_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR4_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR4_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR4_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR4_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR4_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR4_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR4_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR4_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR4_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR4_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR4_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR5 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR5_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR5_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR5_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR5_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR5_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR5_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR5_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR5_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR5_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR5_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR5_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR5_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR5_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR6 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR6_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR6_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR6_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR6_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR6_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR6_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR6_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR6_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR6_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR6_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR6_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR6_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR6_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DCTAR7 */
-+/* Baud rate scaler */
-+#define MCF_DSPI_DCTAR7_BR(x) (((x)&0x0000000F))
-+/* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR7_DT(x) (((x)&0x0000000F)<<4)
-+/* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR7_ASC(x) (((x)&0x0000000F)<<8)
-+/* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR7_CSSCK(x) (((x)&0x0000000F)<<12)
-+/* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR7_PBR(x) (((x)&0x00000003)<<16)
-+/* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR7_PDT(x) (((x)&0x00000003)<<18)
-+/* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR7_PASC(x) (((x)&0x00000003)<<20)
-+/* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR7_PCSSCK(x) (((x)&0x00000003)<<22)
-+/* LSB first enable */
-+#define MCF_DSPI_DCTAR7_LSBFE (0x01000000)
-+/* Clock phase */
-+#define MCF_DSPI_DCTAR7_CPHA (0x02000000)
-+/* Clock polarity */
-+#define MCF_DSPI_DCTAR7_CPOL (0x04000000)
-+/* Frame size */
-+#define MCF_DSPI_DCTAR7_FMSZ(x) (((x)&0x0000000F)<<27)
-+/* Double baud rate */
-+#define MCF_DSPI_DCTAR7_DBR (0x80000000)
-+
-+/* Bit definitions and macros for DSR */
-+/* Receive next pointer */
-+#define MCF_DSPI_DSR_RXPTR(x) (((x)&0x0000000F))
-+/* Receive FIFO counter */
-+#define MCF_DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4)
-+/* Transmit next pointer */
-+#define MCF_DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8)
-+/* Transmit FIFO counter */
-+#define MCF_DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12)
-+/* Receive FIFO drain flag */
-+#define MCF_DSPI_DSR_RFDF (0x00020000)
-+/* Receive FIFO overflow flag */
-+#define MCF_DSPI_DSR_RFOF (0x00080000)
-+/* Transmit FIFO fill flag */
-+#define MCF_DSPI_DSR_TFFF (0x02000000)
-+/* Transmit FIFO underflow flag */
-+#define MCF_DSPI_DSR_TFUF (0x08000000)
-+/* End of queue flag */
-+#define MCF_DSPI_DSR_EOQF (0x10000000)
-+/* Tx and Rx status (enabled | disabled) */
-+#define MCF_DSPI_DSR_TXRXS (0x40000000)
-+/* Transfer complete flag */
-+#define MCF_DSPI_DSR_TCF (0x80000000)
-+
-+/* Bit definitions and macros for DRSER */
-+/* Receive FIFO drain DMA or interrupt select */
-+#define MCF_DSPI_DRSER_RFDFS (0x00010000)
-+/* Receive FIFO drain request enable */
-+#define MCF_DSPI_DRSER_RFDFE (0x00020000)
-+/* Receive FIFO overflow request enable */
-+#define MCF_DSPI_DRSER_RFOFE (0x00080000)
-+/* Transmit FIFO fill DMA or interrupt select */
-+#define MCF_DSPI_DRSER_TFFFS (0x01000000)
-+/* Transmit FIFO fill request enable */
-+#define MCF_DSPI_DRSER_TFFFE (0x02000000)
-+/* Transmit FIFO underflow request enable */
-+#define MCF_DSPI_DRSER_TFUFE (0x08000000)
-+/* DSPI finished request enable */
-+#define MCF_DSPI_DRSER_EOQFE (0x10000000)
-+/* Transmission complete request enable */
-+#define MCF_DSPI_DRSER_TCFE (0x80000000)
-+
-+/* Bit definitions and macros for DTFR */
-+/* Transmit data */
-+#define MCF_DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFR_PCS0 (0x00010000)
-+/* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFR_PCS1 (0x00020000)
-+/* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFR_PCS2 (0x00040000)
-+/* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFR_PCS3 (0x00080000)
-+/* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFR_PCS4 (0x00100000)
-+/* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFR_PCS5 (0x00200000)
-+/* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFR_PCS6 (0x00400000)
-+/* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFR_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFR_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFR_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFR_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DRFR */
-+/* Receive data */
-+#define MCF_DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DTFDR group */
-+/* Transmit data */
-+#define MCF_DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS0 (0x00010000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS1 (0x00020000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS2 (0x00040000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS3 (0x00080000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS4 (0x00100000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS5 (0x00200000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS6 (0x00400000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DTFDR0 */
-+/* Transmit data */
-+#define MCF_DSPI_DTFDR0_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS0 (0x00010000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS1 (0x00020000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS2 (0x00040000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS3 (0x00080000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS4 (0x00100000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS5 (0x00200000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS6 (0x00400000)
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR0_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR0_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR0_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR0_CONT (0x80000000)
-+/* Bit definitions and macros for DTFDR1 */
-+/* Transmit data */
-+#define MCF_DSPI_DTFDR1_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR1_PCS0 (0x00010000)
-+/* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR1_PCS1 (0x00020000)
-+/* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR1_PCS2 (0x00040000)
-+/* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR1_PCS3 (0x00080000)
-+/* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR1_PCS4 (0x00100000)
-+/* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR1_PCS5 (0x00200000)
-+/* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR1_PCS6 (0x00400000)
-+/* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR1_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR1_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR1_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR1_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR1_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DTFDR2 */
-+#define MCF_DSPI_DTFDR2_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR2_PCS0 (0x00010000)
-+/* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR2_PCS1 (0x00020000)
-+/* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR2_PCS2 (0x00040000)
-+/* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR2_PCS3 (0x00080000)
-+/* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR2_PCS4 (0x00100000)
-+/* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR2_PCS5 (0x00200000)
-+/* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR2_PCS6 (0x00400000)
-+/* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR2_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR2_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR2_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR2_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR2_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DTFDR3 */
-+/* Transmit data */
-+#define MCF_DSPI_DTFDR3_TXDATA(x) (((x)&0x0000FFFF))
-+/* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR3_PCS0 (0x00010000)
-+/* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR3_PCS1 (0x00020000)
-+/* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR3_PCS2 (0x00040000)
-+/* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR3_PCS3 (0x00080000)
-+/* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR3_PCS4 (0x00100000)
-+/* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR3_PCS5 (0x00200000)
-+/* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR3_PCS6 (0x00400000)
-+/* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR3_PCS7 (0x00800000)
-+/* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR3_CTCNT (0x04000000)
-+/* End of queue */
-+#define MCF_DSPI_DTFDR3_EOQ (0x08000000)
-+/* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR3_CTAS(x) (((x)&0x00000007)<<28)
-+/* Continuous peripheral chip-select enable */
-+#define MCF_DSPI_DTFDR3_CONT (0x80000000)
-+
-+/* Bit definitions and macros for DRFDR group */
-+#define MCF_DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DRFDR0 */
-+#define MCF_DSPI_DRFDR0_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DRFDR1 */
-+#define MCF_DSPI_DRFDR1_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DRFDR2 */
-+#define MCF_DSPI_DRFDR2_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for DRFDR3 */
-+#define MCF_DSPI_DRFDR3_RXDATA(x) (((x)&0x0000FFFF))
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5441X_DSPI_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_dtim.h
-@@ -0,0 +1,95 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_DTIM_H__
-+#define __MCF5441X_DTIM_H__
-+
-+/*********************************************************************
-+*
-+* DMA Timers (DTIM)
-+*
-+*********************************************************************/
-+/* Register read/write macros */
-+#define MCF_DTIM0_DTMR 0xFC070000 /* DMA Timer Mode Register */
-+#define MCF_DTIM0_DTXMR 0xFC070002 /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM0_DTER 0xFC070003 /* DMA Timer Event Register */
-+#define MCF_DTIM0_DTRR 0xFC070004 /* DMA Timer Reference Register */
-+#define MCF_DTIM0_DTCR 0xFC070008 /* DMA Timer Capture Register */
-+#define MCF_DTIM0_DTCN 0xFC07000C /* DMA Timer Counter Register */
-+#define MCF_DTIM1_DTMR 0xFC074000 /* DMA Timer Mode Register */
-+#define MCF_DTIM1_DTXMR 0xFC074002 /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM1_DTER 0xFC074003 /* DMA Timer Event Register */
-+#define MCF_DTIM1_DTRR 0xFC074004 /* DMA Timer Reference Register */
-+#define MCF_DTIM1_DTCR 0xFC074008 /* DMA Timer Capture Register */
-+#define MCF_DTIM1_DTCN 0xFC07400C /* DMA Timer Counter Register */
-+#define MCF_DTIM2_DTMR 0xFC078000 /* DMA Timer Mode Register */
-+#define MCF_DTIM2_DTXMR 0xFC078002 /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM2_DTER 0xFC078003 /* DMA Timer Event Register */
-+#define MCF_DTIM2_DTRR 0xFC078004 /* DMA Timer Reference Register */
-+#define MCF_DTIM2_DTCR 0xFC078008 /* DMA Timer Capture Register */
-+#define MCF_DTIM2_DTCN 0xFC07800C /* DMA Timer Counter Register */
-+#define MCF_DTIM3_DTMR 0xFC07C000 /* DMA Timer Mode Register */
-+#define MCF_DTIM3_DTXMR 0xFC07C002 /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM3_DTER 0xFC07C003 /* DMA Timer Event Register */
-+#define MCF_DTIM3_DTRR 0xFC07C004 /* DMA Timer Reference Register */
-+#define MCF_DTIM3_DTCR 0xFC07C008 /* DMA Timer Capture Register */
-+#define MCF_DTIM3_DTCN 0xFC07C00C /* DMA Timer Counter Register */
-+
-+/* Parameterized register read/write macros for multiple modules */
-+/* DMA Timer Mode Register */
-+#define MCF_DTIM_DTMR(x) (0xFC070000+((x)*0x4000))
-+/* DMA Timer Extended Mode Register */
-+#define MCF_DTIM_DTXMR(x) (0xFC070002+((x)*0x4000))
-+/* DMA Timer Event Register */
-+#define MCF_DTIM_DTER(x) (0xFC070003+((x)*0x4000))
-+/* DMA Timer Reference Register */
-+#define MCF_DTIM_DTRR(x) (0xFC070004+((x)*0x4000))
-+/* DMA Timer Capture Register */
-+#define MCF_DTIM_DTCR(x) (0xFC070008+((x)*0x4000))
-+/* DMA Timer Counter Register */
-+#define MCF_DTIM_DTCN(x) (0xFC07000C+((x)*0x4000))
-+
-+/* Bit definitions and macros for DTMR */
-+#define MCF_DTIM_DTMR_RST (0x0001) /* Reset */
-+#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */
-+#define MCF_DTIM_DTMR_FRR (0x0008) /* Free run/restart */
-+/* Output reference request/interrupt enable */
-+#define MCF_DTIM_DTMR_ORRI (0x0010)
-+#define MCF_DTIM_DTMR_OM (0x0020) /* Output Mode */
-+#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */
-+#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */
-+#define MCF_DTIM_DTMR_RST_EN (0x0001)
-+#define MCF_DTIM_DTMR_RST_RST (0x0000)
-+#define MCF_DTIM_DTMR_CE_ANY (0x00C0)
-+#define MCF_DTIM_DTMR_CE_FALL (0x0080)
-+#define MCF_DTIM_DTMR_CE_RISE (0x0040)
-+#define MCF_DTIM_DTMR_CE_NONE (0x0000)
-+#define MCF_DTIM_DTMR_CLK_DTIN (0x0006)
-+#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004)
-+#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002)
-+#define MCF_DTIM_DTMR_CLK_STOP (0x0000)
-+
-+/* Bit definitions and macros for DTXMR */
-+#define MCF_DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */
-+#define MCF_DTIM_DTXMR_DMAEN (0x80) /* DMA request */
-+#define MCF_DTIM_DTXMR_1588EN (0x20) /* Enable 1588 mode*/
-+
-+/* Bit definitions and macros for DTER */
-+#define MCF_DTIM_DTER_CAP (0x01) /* Capture event */
-+#define MCF_DTIM_DTER_REF (0x02) /* Output reference event */
-+
-+/* Interrupts used for system timers */
-+#define MCFSIM_ICR_TIMER0 (0xFC048040+32)
-+#define MCFSIM_ICR_TIMER1 (0xFC048040+33)
-+#define MCFSIM_ICR_TIMER2 (0xFC048040+34)
-+#define MCFSIM_ICR_TIMER3 (0xFC048040+35)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5441X_DTIM_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_edma.h
-@@ -0,0 +1,303 @@
-+/* mcf5441x_edma.h
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Lanttor.Guo@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef __MCF5441X_EDMA_H__
-+#define __MCF5441X_EDMA_H__
-+
-+/*
-+ * Enhanced DMA (EDMA)
-+ */
-+
-+/* Channels */
-+#define MCF_EDMA_CHAN_DREQ0 0 /* External DMA request 0 */
-+#define MCF_EDMA_CHAN_DREQ1 1 /* External DMA request 1 */
-+#define MCF_EDMA_CHAN_UART0_RX 2 /* UART0 Receive */
-+#define MCF_EDMA_CHAN_UART0_TX 3 /* UART0 Transmit */
-+#define MCF_EDMA_CHAN_UART1_RX 4 /* UART1 Receive */
-+#define MCF_EDMA_CHAN_UART1_TX 5 /* UART1 Transmit */
-+#define MCF_EDMA_CHAN_UART2_RX 6 /* UART2 Receive */
-+#define MCF_EDMA_CHAN_UART2_TX 7 /* UART2 Transmit */
-+#define MCF_EDMA_CHAN_TIMER0 8 /* Timer 0 / SSI0 Rx */
-+#define MCF_EDMA_CHAN_TIMER1 9 /* Timer 1 / SSI1 Rx */
-+#define MCF_EDMA_CHAN_TIMER2 10 /* Timer 2 / SSI0 Tx */
-+#define MCF_EDMA_CHAN_TIMER3 11 /* Timer 3 / SSI1 Tx */
-+#define MCF_EDMA_CHAN_DSPI0_RX 12 /* DSPI0 Receive */
-+#define MCF_EDMA_CHAN_DSPI0_TX 13 /* DSPI0 Transmit */
-+#define MCF_EDMA_CHAN_DSPI1_RX 14 /* DSPI1 Receive */
-+#define MCF_EDMA_CHAN_DSPI1_TX 15 /* DSPI1 Transmit */
-+#define MCF_EDMA_CHAN_UART3_RX 16 /* UART3 Receive */
-+#define MCF_EDMA_CHAN_UART3_TX 17 /* UART3 Transmit */
-+#define MCF_EDMA_CHAN_UART4_RX 18 /* UART4 Receive */
-+#define MCF_EDMA_CHAN_UART4_TX 19 /* UART4 Transmit */
-+#define MCF_EDMA_CHAN_UART5_RX 20 /* UART5 Receive */
-+#define MCF_EDMA_CHAN_UART5_TX 21 /* UART5 Transmit */
-+#define MCF_EDMA_CHAN_UART6_RX 22 /* UART6 Receive */
-+#define MCF_EDMA_CHAN_UART6_TX 23 /* UART6 Transmit */
-+#define MCF_EDMA_CHAN_I2C0 24 /* I2C0 */
-+#define MCF_EDMA_CHAN_I2C1 25 /* I2C1 */
-+#define MCF_EDMA_CHAN_I2C2 26 /* I2C2 */
-+#define MCF_EDMA_CHAN_I2C3 27 /* I2C3 */
-+#define MCF_EDMA_CHAN_DSPI2_RX 28 /* DSPI2 Receive */
-+#define MCF_EDMA_CHAN_DSPI2_TX 29 /* DSPI2 Transmit */
-+#define MCF_EDMA_CHAN_N0 30 /* Available for software */
-+#define MCF_EDMA_CHAN_N1 31 /* Available for software */
-+#define MCF_EDMA_CHAN_UART7_RX 32 /* UART7 Receive */
-+#define MCF_EDMA_CHAN_UART7_TX 33 /* UART7 Transmit */
-+#define MCF_EDMA_CHAN_UART8_RX 34 /* UART8 Receive */
-+#define MCF_EDMA_CHAN_UART8_TX 35 /* UART8 Transmit */
-+#define MCF_EDMA_CHAN_UART9_RX 36 /* UART9 Receive */
-+#define MCF_EDMA_CHAN_UART9_TX 37 /* UART9 Transmit */
-+#define MCF_EDMA_CHAN_OW 38 /* 1-Wire */
-+#define MCF_EDMA_CHAN_RESERVED 39 /* Reserved */
-+#define MCF_EDMA_CHAN_I2C4 40 /* I2C4 */
-+#define MCF_EDMA_CHAN_I2C5 41 /* I2C5 */
-+#define MCF_EDMA_CHAN_N2 42 /* Available for software */
-+#define MCF_EDMA_CHAN_N3 43 /* Available for software */
-+#define MCF_EDMA_CHAN_DSPI3_RX 44 /* DSPI3 Receive */
-+#define MCF_EDMA_CHAN_DSPI3_TX 45 /* DSPI3 Transmit */
-+#define MCF_EDMA_CHAN_SSI0_RX0 48 /* SSI0 Receive 0 */
-+#define MCF_EDMA_CHAN_SSI0_RX1 49 /* SSI0 Receive 1 */
-+#define MCF_EDMA_CHAN_SSI0_TX0 50 /* SSI0 Transmit 0 */
-+#define MCF_EDMA_CHAN_SSI0_TX1 51 /* SSI0 Transmit 1 */
-+#define MCF_EDMA_CHAN_SSI1_RX0 52 /* SSI1 Receive 0 */
-+#define MCF_EDMA_CHAN_SSI1_RX1 53 /* SSI1 Receive 1 */
-+#define MCF_EDMA_CHAN_SSI1_TX0 54 /* SSI1 Transmit 0 */
-+#define MCF_EDMA_CHAN_SSI1_TX1 55 /* SSI1 Transmit 1 */
-+#define MCF_EDMA_CHAN_PWM_CAP 56 /* PWM Capture */
-+#define MCF_EDMA_CHAN_PWM_VAL 57 /* PWM Value */
-+#define MCF_EDMA_CHAN_RESERVED2 58 /* Reserved */
-+#define MCF_EDMA_CHAN_ESDHC 59 /* eSDHC */
-+#define MCF_EDMA_CHAN_ADC0 60 /* ADC 0 */
-+#define MCF_EDMA_CHAN_ADC1 61 /* ADC 1 */
-+#define MCF_EDMA_CHAN_DAC0 62 /* DAC 0 */
-+#define MCF_EDMA_CHAN_DAC1 63 /* DAC 1 */
-+
-+/* Register read/write macros */
-+#define MCF_EDMA_CR MCF_REG32(0xFC044000)
-+#define MCF_EDMA_ES MCF_REG32(0xFC044004)
-+#define MCF_EDMA_ERQH MCF_REG32(0xFC044008)
-+#define MCF_EDMA_ERQL MCF_REG32(0xFC04400C)
-+#define MCF_EDMA_EEIH MCF_REG32(0xFC044010)
-+#define MCF_EDMA_EEIL MCF_REG32(0xFC044014)
-+#define MCF_EDMA_SERQ MCF_REG08(0xFC044018)
-+#define MCF_EDMA_CERQ MCF_REG08(0xFC044019)
-+#define MCF_EDMA_SEEI MCF_REG08(0xFC04401A)
-+#define MCF_EDMA_CEEI MCF_REG08(0xFC04401B)
-+#define MCF_EDMA_CINT MCF_REG08(0xFC04401C)
-+#define MCF_EDMA_CERR MCF_REG08(0xFC04401D)
-+#define MCF_EDMA_SSRT MCF_REG08(0xFC04401E)
-+#define MCF_EDMA_CDNE MCF_REG08(0xFC04401F)
-+#define MCF_EDMA_INTH MCF_REG32(0xFC044020)
-+#define MCF_EDMA_INTL MCF_REG32(0xFC044024)
-+#define MCF_EDMA_ERRH MCF_REG32(0xFC044028)
-+#define MCF_EDMA_ERRL MCF_REG32(0xFC04402C)
-+#define MCF_EDMA_RSH MCF_REG32(0xFC044030)
-+#define MCF_EDMA_RSL MCF_REG32(0xFC044034)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_EDMA_DCHPRI(x) MCF_REG08(0xFC044100+((x)*0x001))
-+#define MCF_EDMA_TCD_SADDR(x) MCF_REG32(0xFC045000+((x)*0x020))
-+#define MCF_EDMA_TCD_ATTR(x) MCF_REG16(0xFC045004+((x)*0x020))
-+#define MCF_EDMA_TCD_SOFF(x) MCF_REG16(0xFC045006+((x)*0x020))
-+#define MCF_EDMA_TCD_NBYTES(x) MCF_REG32(0xFC045008+((x)*0x020))
-+#define MCF_EDMA_TCD_SLAST(x) MCF_REG32(0xFC04500C+((x)*0x020))
-+#define MCF_EDMA_TCD_DADDR(x) MCF_REG32(0xFC045010+((x)*0x020))
-+#define MCF_EDMA_TCD_CITER_ELINK(x) MCF_REG16(0xFC045014+((x)*0x020))
-+#define MCF_EDMA_TCD_CITER(x) MCF_REG16(0xFC045014+((x)*0x020))
-+#define MCF_EDMA_TCD_DOFF(x) MCF_REG16(0xFC045016+((x)*0x020))
-+#define MCF_EDMA_TCD_DLAST_SGA(x) MCF_REG32(0xFC045018+((x)*0x020))
-+#define MCF_EDMA_TCD_BITER_ELINK(x) MCF_REG16(0xFC04501C+((x)*0x020))
-+#define MCF_EDMA_TCD_BITER(x) MCF_REG16(0xFC04501C+((x)*0x020))
-+#define MCF_EDMA_TCD_CSR(x) MCF_REG16((0xFC04501e)+((x)*0x020))
-+
-+/* Bit definitions and macros for CR */
-+#define MCF_EDMA_CR_EDBG (0x00000002)
-+#define MCF_EDMA_CR_ERCA (0x00000004)
-+#define MCF_EDMA_CR_ERGA (0x00000008)
-+#define MCF_EDMA_CR_HOE (0x00000010)
-+#define MCF_EDMA_CR_HALT (0x00000020)
-+#define MCF_EDMA_CR_CLM (0x00000040)
-+#define MCF_EDMA_CR_EMLM (0x00000080)
-+#define MCF_EDMA_CR_GRP0PRI(x) (((x)&0x03)<<8)
-+#define MCF_EDMA_CR_GRP1PRI(x) (((x)&0x03)<<10)
-+#define MCF_EDMA_CR_GRP2PRI(x) (((x)&0x03)<<12)
-+#define MCF_EDMA_CR_GRP3PRI(x) (((x)&0x03)<<14)
-+#define MCF_EDMA_CR_ECX (0x00010000)
-+#define MCF_EDMA_CR_CX (0x00020000)
-+
-+/* Bit definitions and macros for ES */
-+#define MCF_EDMA_ES_DBE (0x00000001)
-+#define MCF_EDMA_ES_SBE (0x00000002)
-+#define MCF_EDMA_ES_SGE (0x00000004)
-+#define MCF_EDMA_ES_NCE (0x00000008)
-+#define MCF_EDMA_ES_DOE (0x00000010)
-+#define MCF_EDMA_ES_DAE (0x00000020)
-+#define MCF_EDMA_ES_SOE (0x00000040)
-+#define MCF_EDMA_ES_SAE (0x00000080)
-+#define MCF_EDMA_ES_ERRCHN(x) (((x)&0x0000003F)<<8)
-+#define MCF_EDMA_ES_CPE (0x00004000)
-+#define MCF_EDMA_ES_GPE (0x00008000)
-+#define MCF_EDMA_ES_ECX (0x00010000)
-+#define MCF_EDMA_ES_VLD (0x80000000)
-+
-+/* Bit definitions and macros for ERQ: 0~63 bits */
-+#define MCF_EDMA_ERQ_ERQH(x) (0x01<<x) /*32~63*/
-+#define MCF_EDMA_ERQ_ERQL(x) (0x01<<x) /*0~31*/
-+
-+/* Bit definitions and macros for EEI: 0~63 bits */
-+#define MCF_EDMA_EEI_EEIH(x) (0x01<<x) /*32~63*/
-+#define MCF_EDMA_EEI_EEIL(x) (0x01<<x) /*0~31*/
-+
-+/* Bit definitions and macros for SERQ */
-+#define MCF_EDMA_SERQ_SERQ(x) (((x)&0x3F))
-+#define MCF_EDMA_SERQ_SAER (0x40)
-+#define MCF_EDMA_SERQ_NOP (0x80)
-+
-+/* Bit definitions and macros for CERQ */
-+#define MCF_EDMA_CERQ_CERQ(x) (((x)&0x3F))
-+#define MCF_EDMA_CERQ_CAER (0x40)
-+#define MCF_EDMA_CERQ_NOP (0x80)
-+
-+/* Bit definitions and macros for SEEI */
-+#define MCF_EDMA_SEEI_SEEI(x) (((x)&0x3F))
-+#define MCF_EDMA_SEEI_SAEE (0x40)
-+#define MCF_EDMA_SEEI_NOP (0x80)
-+
-+/* Bit definitions and macros for CEEI */
-+#define MCF_EDMA_CEEI_CEEI(x) (((x)&0x3F))
-+#define MCF_EDMA_CEEI_CAEE (0x40)
-+#define MCF_EDMA_CEEI_NOP (0x80)
-+
-+/* Bit definitions and macros for CINT */
-+#define MCF_EDMA_CINT_CINT(x) (((x)&0x3F))
-+#define MCF_EDMA_CINT_CAIR (0x40)
-+#define MCF_EDMA_CINT_NOP (0x80)
-+
-+/* Bit definitions and macros for CERR */
-+#define MCF_EDMA_CERR_CERR(x) (((x)&0x3F))
-+#define MCF_EDMA_CERR_CAER (0x40)
-+#define MCF_EDMA_CERR_NOP (0x80)
-+
-+/* Bit definitions and macros for SSRT */
-+#define MCF_EDMA_SSRT_SSRT(x) (((x)&0x3F))
-+#define MCF_EDMA_SSRT_SAST (0x40)
-+#define MCF_EDMA_SSRT_NOP (0x80)
-+
-+/* Bit definitions and macros for CDNE */
-+#define MCF_EDMA_CDNE_CDNE(x) (((x)&0x3F))
-+#define MCF_EDMA_CDNE_CADN (0x40)
-+#define MCF_EDMA_CDNE_NOP (0x80)
-+
-+/* Bit definitions and macros for INTR: 0~63 bits */
-+#define MCF_EDMA_INTR_INTH(x) (0x01<<x) /*32~63*/
-+#define MCF_EDMA_INTR_INTL(x) (0x01<<x) /*0~31*/
-+
-+/* Bit definitions and macros for ERR: 0~63 bits */
-+#define MCF_EDMA_ERR_ERRH(x) (0x01<<x) /*32~63*/
-+#define MCF_EDMA_ERR_ERRL(x) (0x01<<x) /*0~31*/
-+
-+/* Bit defineitions and macros for HRSH/HRSL */
-+#define MCF_EDMA_HRS_HRSH(x) (0x01<<x) /*32~63*/
-+#define MCF_EDMA_HRS_HRSL(x) (0x01<<x) /*0~31*/
-+
-+/* Bit definitions and macros for DCHPRI group */
-+#define MCF_EDMA_DCHPRI_CHPRI(x) (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI_GRPPRI(x) (((x)&0x03) << 4)
-+#define MCF_EDMA_DCHPRI_DPA (0x40)
-+#define MCF_EDMA_DCHPRI_ECP (0x80)
-+
-+/* Bit definitions and macros for TCD_SADDR group */
-+#define MCF_EDMA_TCD_SADDR_SADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD_ATTR group */
-+#define MCF_EDMA_TCD_ATTR_DSIZE(x) (((x)&0x0007))
-+#define MCF_EDMA_TCD_ATTR_DMOD(x) (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD_ATTR_SSIZE(x) (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD_ATTR_SMOD(x) (((x)&0x001F)<<11)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_8BIT (0x0000)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_16BIT (0x0100)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_32BIT (0x0200)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_16BYTE (0x0400)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_8BIT (0x0000)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_16BIT (0x0001)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_32BIT (0x0002)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_16BYTE (0x0004)
-+
-+/* Bit definitions and macros for TCD_SOFF group */
-+#define MCF_EDMA_TCD_SOFF_SOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD_NBYTES group */
-+#define MCF_EDMA_TCD_NBYTES_NBYTES(x) (x)
-+#define MCF_EDMA_TCD_NBYTES_SMLOE (0x80000000)
-+#define MCF_EDMA_TCD_NBYTES_DMLOE (0x40000000)
-+#define MCF_EDMA_TCD_NBYTES_MLOFF(x) (((x)&0xFFFFF)<<20)
-+#define MCF_EDMA_TCD_NBYTES_9BITS ((x)&0x1FF)
-+
-+/* Bit definitions and macros for TCD_SLAST group */
-+#define MCF_EDMA_TCD_SLAST_SLAST(x) (x)
-+
-+/* Bit definitions and macros for TCD_DADDR group */
-+#define MCF_EDMA_TCD_DADDR_DADDR(x) (x)
-+
-+/* Bit definitions and macros for TCD_CITER_ELINK group */
-+#define MCF_EDMA_TCD_CITER_ELINK_CITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD_CITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD_CITER group */
-+#define MCF_EDMA_TCD_CITER_CITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD_CITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD_DOFF group */
-+#define MCF_EDMA_TCD_DOFF_DOFF(x) (x)
-+
-+/* Bit definitions and macros for TCD_DLAST_SGA group */
-+#define MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(x) (x)
-+
-+/* Bit definitions and macros for TCD_BITER_ELINK group */
-+#define MCF_EDMA_TCD_BITER_ELINK_BITER(x) (((x)&0x01FF))
-+#define MCF_EDMA_TCD_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD_BITER_ELINK_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD_BITER group */
-+#define MCF_EDMA_TCD_BITER_BITER(x) (((x)&0x7FFF))
-+#define MCF_EDMA_TCD_BITER_E_LINK (0x8000)
-+
-+/* Bit definitions and macros for TCD_CSR group */
-+#define MCF_EDMA_TCD_CSR_START (0x0001)
-+#define MCF_EDMA_TCD_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD_CSR_BWC(x) (((x)&0x0003)<<14)
-+#define MCF_EDMA_TCD_CSR_BWC_NO_STALL (0x0000)
-+#define MCF_EDMA_TCD_CSR_BWC_4CYC_STALL (0x8000)
-+#define MCF_EDMA_TCD_CSR_BWC_8CYC_STALL (0xC000)
-+
-+/* Bit definitions and macros for TCD0_CSR */
-+#define MCF_EDMA_TCD0_CSR_START (0x0001)
-+#define MCF_EDMA_TCD0_CSR_INT_MAJOR (0x0002)
-+#define MCF_EDMA_TCD0_CSR_INT_HALF (0x0004)
-+#define MCF_EDMA_TCD0_CSR_D_REQ (0x0008)
-+#define MCF_EDMA_TCD0_CSR_E_SG (0x0010)
-+#define MCF_EDMA_TCD0_CSR_E_LINK (0x0020)
-+#define MCF_EDMA_TCD0_CSR_ACTIVE (0x0040)
-+#define MCF_EDMA_TCD0_CSR_DONE (0x0080)
-+#define MCF_EDMA_TCD0_CSR_LINKCH(x) (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD0_CSR_BWC(x) (((x)&0x0003)<<14)
-+#define MCF_EDMA_TCD0_CSR_BWC_NO_STALL (0x0000)
-+#define MCF_EDMA_TCD0_CSR_BWC_4CYC_STALL (0x8000)
-+#define MCF_EDMA_TCD0_CSR_BWC_8CYC_STALL (0xC000)
-+
-+#endif /* __MCF5441X_EDMA_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_eport.h
-@@ -0,0 +1,94 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_EPORT_H__
-+#define __MCF5441X_EPORT_H__
-+
-+/*********************************************************************
-+*
-+* Edge Port Module (EPORT)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_EPORT_EPPAR MCF_REG16(0xFC090000)
-+#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002)
-+#define MCF_EPORT_EPIER MCF_REG08(0xFC090003)
-+#define MCF_EPORT_EPDR MCF_REG08(0xFC090004)
-+#define MCF_EPORT_EPPDR MCF_REG08(0xFC090005)
-+#define MCF_EPORT_EPFR MCF_REG08(0xFC090006)
-+
-+/* Bit definitions and macros for EPPAR */
-+#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
-+#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4)
-+#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6)
-+#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8)
-+#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10)
-+#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12)
-+#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14)
-+#define MCF_EPORT_EPPAR_LEVEL (0)
-+#define MCF_EPORT_EPPAR_RISING (1)
-+#define MCF_EPORT_EPPAR_FALLING (2)
-+#define MCF_EPORT_EPPAR_BOTH (3)
-+#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000)
-+#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000)
-+#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000)
-+#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000)
-+#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000)
-+#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000)
-+#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400)
-+#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800)
-+#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00)
-+#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100)
-+#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200)
-+#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300)
-+#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040)
-+#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080)
-+#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0)
-+#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010)
-+#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020)
-+#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030)
-+#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004)
-+#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008)
-+#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C)
-+#define MCF_EPORT_EPPAR_EPPA0_LEVEL (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA0_RISING (0x0001)
-+#define MCF_EPORT_EPPAR_EPPA0_FALLING (0x0002)
-+#define MCF_EPORT_EPPAR_EPPA0_BOTH (0x0003)
-+
-+/* Bit definitions and macros for EPIER */
-+#define MCF_EPORT_EPIER_EPIE0 (0x01)
-+#define MCF_EPORT_EPIER_EPIE1 (0x02)
-+#define MCF_EPORT_EPIER_EPIE2 (0x04)
-+#define MCF_EPORT_EPIER_EPIE3 (0x08)
-+#define MCF_EPORT_EPIER_EPIE4 (0x10)
-+#define MCF_EPORT_EPIER_EPIE5 (0x20)
-+#define MCF_EPORT_EPIER_EPIE6 (0x40)
-+#define MCF_EPORT_EPIER_EPIE7 (0x80)
-+
-+/* Bit definitions and macros for EPFR */
-+#define MCF_EPORT_EPFR_EPF0 (0x01)
-+#define MCF_EPORT_EPFR_EPF1 (0x02)
-+#define MCF_EPORT_EPFR_EPF2 (0x04)
-+#define MCF_EPORT_EPFR_EPF3 (0x08)
-+#define MCF_EPORT_EPFR_EPF4 (0x10)
-+#define MCF_EPORT_EPFR_EPF5 (0x20)
-+#define MCF_EPORT_EPFR_EPF6 (0x40)
-+#define MCF_EPORT_EPFR_EPF7 (0x80)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5441X_EPORT_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_fbcs.h
-@@ -0,0 +1,204 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_FBCS_H__
-+#define __MCF5441X_FBCS_H__
-+
-+/*********************************************************************
-+*
-+* FlexBus Chip Selects (FBCS)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_FBCS_CSAR0 MCF_REG32(0xFC008000) /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR0 MCF_REG32(0xFC008004) /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR0 MCF_REG32(0xFC008008) /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR1 MCF_REG32(0xFC00800C) /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR1 MCF_REG32(0xFC008010) /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR1 MCF_REG32(0xFC008014) /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR2 MCF_REG32(0xFC008018) /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR2 MCF_REG32(0xFC00801C) /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR2 MCF_REG32(0xFC008020) /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR3 MCF_REG32(0xFC008024) /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR3 MCF_REG32(0xFC008028) /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR3 MCF_REG32(0xFC00802C) /* Chip-select Cntl Register */
-+
-+/* Parameterized register read/write macros for multiple registers */
-+/* Chip-select Addr Register */
-+#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C))
-+/* Chip-select Mask Register */
-+#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C))
-+/* Chip-select Cntl Register */
-+#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C))
-+
-+/* Bit definitions and macros for CSAR group */
-+#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000)
-+
-+/* Bit definitions and macros for CSAR0 */
-+#define MCF_FBCS_CSAR0_BA(x) ((x)&0xFFFF0000)
-+
-+/* Bit definitions and macros for CSMR group */
-+#define MCF_FBCS_CSMR_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base addr mask */
-+#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000)
-+#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000)
-+#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000)
-+#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000)
-+#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000)
-+#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000)
-+#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000)
-+#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000)
-+#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000)
-+#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000)
-+#define MCF_FBCS_CSMR_BAM_8M (0x007F0000)
-+#define MCF_FBCS_CSMR_BAM_4M (0x003F0000)
-+#define MCF_FBCS_CSMR_BAM_2M (0x001F0000)
-+#define MCF_FBCS_CSMR_BAM_1M (0x000F0000)
-+#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000)
-+#define MCF_FBCS_CSMR_BAM_512K (0x00070000)
-+#define MCF_FBCS_CSMR_BAM_256K (0x00030000)
-+#define MCF_FBCS_CSMR_BAM_128K (0x00010000)
-+#define MCF_FBCS_CSMR_BAM_64K (0x00000000)
-+
-+/* Bit definitions and macros for CSMR0 */
-+#define MCF_FBCS_CSMR0_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR0_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR0_BAM(x) (((x)&0x0000FFFF)<<16) /* Base addr mask */
-+#define MCF_FBCS_CSMR0_BAM_4G (0xFFFF0000)
-+#define MCF_FBCS_CSMR0_BAM_2G (0x7FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_1G (0x3FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_1024M (0x3FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_512M (0x1FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_256M (0x0FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_128M (0x07FF0000)
-+#define MCF_FBCS_CSMR0_BAM_64M (0x03FF0000)
-+#define MCF_FBCS_CSMR0_BAM_32M (0x01FF0000)
-+#define MCF_FBCS_CSMR0_BAM_16M (0x00FF0000)
-+#define MCF_FBCS_CSMR0_BAM_8M (0x007F0000)
-+#define MCF_FBCS_CSMR0_BAM_4M (0x003F0000)
-+#define MCF_FBCS_CSMR0_BAM_2M (0x001F0000)
-+#define MCF_FBCS_CSMR0_BAM_1M (0x000F0000)
-+#define MCF_FBCS_CSMR0_BAM_1024K (0x000F0000)
-+#define MCF_FBCS_CSMR0_BAM_512K (0x00070000)
-+#define MCF_FBCS_CSMR0_BAM_256K (0x00030000)
-+#define MCF_FBCS_CSMR0_BAM_128K (0x00010000)
-+#define MCF_FBCS_CSMR0_BAM_64K (0x00000000)
-+
-+/* Bit definitions and macros for CSCR group */
-+#define MCF_FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR_BLS (0x00000200) /* Byte-lane shift */
-+#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+/* Secondary wait state enable */
-+#define MCF_FBCS_CSCR_SWSEN (0x00800000)
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26)
-+#define MCF_FBCS_CSCR_PS_8 (0x00000040)
-+#define MCF_FBCS_CSCR_PS_16 (0x00000080)
-+#define MCF_FBCS_CSCR_PS_32 (0x00000000)
-+
-+/* Bit definitions and macros for CSCR0 */
-+#define MCF_FBCS_CSCR0_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR0_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR0_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR0_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR0_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR0_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR0_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR0_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR0_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+/* Secondary wait state enable */
-+#define MCF_FBCS_CSCR0_SWSEN (0x00800000)
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR0_SWS(x) (((x)&0x0000003F)<<26)
-+#define MCF_FBCS_CSCR0_PS_8 (0x00000040)
-+#define MCF_FBCS_CSCR0_PS_16 (0x00000080)
-+#define MCF_FBCS_CSCR0_PS_32 (0x00000000)
-+
-+/* Bit definitions and macros for CSMR1 */
-+#define MCF_FBCS_CSMR1_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR1_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR1_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR1 */
-+#define MCF_FBCS_CSCR1_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR1_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR1_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR1_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR1_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR1_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR1_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR1_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR1_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+/* Secondary wait state enable */
-+#define MCF_FBCS_CSCR1_SWSEN (0x00800000)
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR1_SWS(x) (((x)&0x0000003F)<<26)
-+
-+/* Bit definitions and macros for CSMR2 */
-+#define MCF_FBCS_CSMR2_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR2_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR2_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR2 */
-+#define MCF_FBCS_CSCR2_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR2_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR2_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR2_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR2_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR2_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR2_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR2_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR2_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+/* Secondary wait state enable */
-+#define MCF_FBCS_CSCR2_SWSEN (0x00800000)
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR2_SWS(x) (((x)&0x0000003F)<<26)
-+
-+/* Bit definitions and macros for CSMR3 */
-+#define MCF_FBCS_CSMR3_V (0x00000001) /* Valid bit */
-+#define MCF_FBCS_CSMR3_WP (0x00000100) /* Write protect */
-+#define MCF_FBCS_CSMR3_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR3 */
-+#define MCF_FBCS_CSCR3_BSTW (0x00000008) /* Burst-write enable */
-+#define MCF_FBCS_CSCR3_BSTR (0x00000010) /* Burst-read enable */
-+#define MCF_FBCS_CSCR3_BEM (0x00000020) /* Byte-enable mode */
-+#define MCF_FBCS_CSCR3_PS(x) (((x)&0x00000003)<<6) /* Port size */
-+#define MCF_FBCS_CSCR3_AA (0x00000100) /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR3_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-+/* Write address hold or deselect */
-+#define MCF_FBCS_CSCR3_WRAH(x) (((x)&0x00000003)<<16)
-+/* Read address hold or deselect */
-+#define MCF_FBCS_CSCR3_RDAH(x) (((x)&0x00000003)<<18)
-+#define MCF_FBCS_CSCR3_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-+/* Secondary wait state enable */
-+#define MCF_FBCS_CSCR3_SWSEN (0x00800000)
-+/* Secondary wait states */
-+#define MCF_FBCS_CSCR3_SWS(x) (((x)&0x0000003F)<<26)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5441X_FBCS_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_flexcan.h
-@@ -0,0 +1,139 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Author: Lanttor Guo <b18203@freescale.com>
-+ *
-+ * This is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef MCF5441X_FLEXCAN_H
-+#define MCF5441X_FLEXCAN_H
-+/*
-+ * FlexCAN Module Configuration Register
-+ */
-+#define CANMCR_MDIS (0x80000000)
-+#define CANMCR_FRZ (0x40000000)
-+#define CANMCR_FEN (0x20000000)
-+#define CANMCR_HALT (0x10000000)
-+#define CANMCR_SOFTRST (0x02000000)
-+#define CANMCR_NOTRDY (0x08000000)
-+#define CANMCR_FRZACK (0x01000000)
-+#define CANMCR_SUPV (0x00800000)
-+#define CANMCR_WARN_EN (0x00200000)
-+#define CANMCR_LPMACK (0x00100000)
-+#define CANMCR_DOZE (0x00040000)
-+#define CANMCR_SRXDIS (0x00020000)
-+#define CANMCR_BCC (0x00010000)
-+#define CANMCR_LPRIO_EN (0x00002000)
-+#define CANMCR_AEN (0x00001000)
-+#define CANMCR_IDAM_VAL(x) ((x & 0x3) << 8)
-+#define CANMCR_MAXMB (0x0F)
-+/*
-+ * FlexCAN Control Register
-+ */
-+#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24)
-+#define CANCTRL_RJW(x) (((x)&0x03)<<22)
-+#define CANCTRL_PSEG1(x) (((x)&0x07)<<19)
-+#define CANCTRL_PSEG2(x) (((x)&0x07)<<16)
-+#define CANCTRL_BOFFMSK (0x00008000)
-+#define CANCTRL_ERRMSK (0x00004000)
-+#define CANCTRL_CLKSRC (0x00002000)
-+#define CANCTRL_LPB (0x00001000)
-+#define CANCTRL_TWRN_MSK (0x00000800)
-+#define CANCTRL_RWRN_MSK (0x00000400)
-+#define CANCTRL_SAMP(x) (((x)&0x01)<<7)
-+#define CANCTRL_BOFFREC (0x00000040)
-+#define CANCTRL_TSYNC (0x00000020)
-+#define CANCTRL_LBUF (0x00000010)
-+#define CANCTRL_LOM (0x00000008)
-+#define CANCTRL_PROPSEG(x) ((x)&0x07)
-+
-+/*
-+ * FlexCAN Error Counter Register
-+ */
-+#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8)
-+#define ERRCNT_TXECTR(x) ((x)&0xFF)
-+
-+/*
-+ * FlexCAN Error and Status Register
-+ */
-+#define ERRSTAT_TWRN_INT (0x00020000)
-+#define ERRSTAT_RWRN_INT (0x00010000)
-+#define ERRSTAT_BITERR(x) (((x)&0x03)<<14)
-+#define ERRSTAT_ACKERR (0x00002000)
-+#define ERRSTAT_CRCERR (0x00001000)
-+#define ERRSTAT_FRMERR (0x00000800)
-+#define ERRSTAT_STFERR (0x00000400)
-+#define ERRSTAT_TXWRN (0x00000200)
-+#define ERRSTAT_RXWRN (0x00000100)
-+#define ERRSTAT_IDLE (0x00000080)
-+#define ERRSTAT_TXRX (0x00000040)
-+#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4)
-+#define ERRSTAT_BOFFINT (0x00000004)
-+#define ERRSTAT_ERRINT (0x00000002)
-+
-+/*
-+ * Interrupt Mask Register
-+ */
-+#define IMASK_BUF15M (0x8000)
-+#define IMASK_BUF14M (0x4000)
-+#define IMASK_BUF13M (0x2000)
-+#define IMASK_BUF12M (0x1000)
-+#define IMASK_BUF11M (0x0800)
-+#define IMASK_BUF10M (0x0400)
-+#define IMASK_BUF9M (0x0200)
-+#define IMASK_BUF8M (0x0100)
-+#define IMASK_BUF7M (0x0080)
-+#define IMASK_BUF6M (0x0040)
-+#define IMASK_BUF5M (0x0020)
-+#define IMASK_BUF4M (0x0010)
-+#define IMASK_BUF3M (0x0008)
-+#define IMASK_BUF2M (0x0004)
-+#define IMASK_BUF1M (0x0002)
-+#define IMASK_BUF0M (0x0001)
-+#define IMASK_BUFnM(x) (0x1<<(x))
-+#define IMASK_BUFF_ENABLE_ALL (0xFFFF)
-+#define IMASK_BUFF_DISABLE_ALL (0x0000)
-+
-+/*
-+ * Interrupt Flag Register
-+ */
-+#define IFLAG_BUF15M (0x8000)
-+#define IFLAG_BUF14M (0x4000)
-+#define IFLAG_BUF13M (0x2000)
-+#define IFLAG_BUF12M (0x1000)
-+#define IFLAG_BUF11M (0x0800)
-+#define IFLAG_BUF10M (0x0400)
-+#define IFLAG_BUF9M (0x0200)
-+#define IFLAG_BUF8M (0x0100)
-+#define IFLAG_BUF7M (0x0080)
-+#define IFLAG_BUF6M (0x0040)
-+#define IFLAG_BUF5M (0x0020)
-+#define IFLAG_BUF4M (0x0010)
-+#define IFLAG_BUF3M (0x0008)
-+#define IFLAG_BUF2M (0x0004)
-+#define IFLAG_BUF1M (0x0002)
-+#define IFLAG_BUF0M (0x0001)
-+#define IFLAG_BUFF_SET_ALL (0xFFFF)
-+#define IFLAG_BUFF_CLEAR_ALL (0x0000)
-+#define IFLAG_BUFnM(x) (0x1<<(x))
-+
-+/*
-+ * Message Buffers
-+ */
-+#define MB_CNT_CODE(x) (((x)&0x0F)<<24)
-+#define MB_CNT_SRR (0x00400000)
-+#define MB_CNT_IDE (0x00200000)
-+#define MB_CNT_RTR (0x00100000)
-+#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF)
-+#define MB_PRIO(x) (((x)&0x7)<<29)
-+#define MB_ID_STD (0x07FF)
-+#define MB_ID_EXT (0x1FFFFFFF)
-+#define MB_CODE_MASK (0xF0FFFFFF)
-+#define CAN_MB 16
-+#define PDEV_MAX 2
-+
-+#endif
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_gpio.h
-@@ -0,0 +1,509 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_GPIO_H__
-+#define __MCF5441X_GPIO_H__
-+
-+/*********************************************************************
-+*
-+* General Purpose I/O Module (GPIO)
-+*
-+*********************************************************************/
-+
-+#define MCF_GPIO_PODR_A MCF_REG08(0xEC094000)
-+#define MCF_GPIO_PODR_B MCF_REG08(0xEC094001)
-+#define MCF_GPIO_PODR_C MCF_REG08(0xEC094002)
-+#define MCF_GPIO_PODR_D MCF_REG08(0xEC094003)
-+#define MCF_GPIO_PODR_E MCF_REG08(0xEC094004)
-+#define MCF_GPIO_PODR_F MCF_REG08(0xEC094005)
-+#define MCF_GPIO_PODR_G MCF_REG08(0xEC094006)
-+#define MCF_GPIO_PODR_H MCF_REG08(0xEC094007)
-+#define MCF_GPIO_PODR_I MCF_REG08(0xEC094008)
-+#define MCF_GPIO_PODR_J MCF_REG08(0xEC094009)
-+#define MCF_GPIO_PODR_K MCF_REG08(0xEC09400A)
-+
-+#define MCF_GPIO_PDDR_A MCF_REG08(0xEC09400C)
-+#define MCF_GPIO_PDDR_B MCF_REG08(0xEC09400D)
-+#define MCF_GPIO_PDDR_C MCF_REG08(0xEC09400E)
-+#define MCF_GPIO_PDDR_D MCF_REG08(0xEC09400F)
-+#define MCF_GPIO_PDDR_E MCF_REG08(0xEC094010)
-+#define MCF_GPIO_PDDR_F MCF_REG08(0xEC094011)
-+#define MCF_GPIO_PDDR_G MCF_REG08(0xEC094012)
-+#define MCF_GPIO_PDDR_H MCF_REG08(0xEC094013)
-+#define MCF_GPIO_PDDR_I MCF_REG08(0xEC094014)
-+#define MCF_GPIO_PDDR_J MCF_REG08(0xEC094015)
-+#define MCF_GPIO_PDDR_K MCF_REG08(0xEC094016)
-+
-+#define MCF_GPIO_PPDSDR_A MCF_REG08(0xEC094018)
-+#define MCF_GPIO_PPDSDR_B MCF_REG08(0xEC094019)
-+#define MCF_GPIO_PPDSDR_C MCF_REG08(0xEC09401A)
-+#define MCF_GPIO_PPDSDR_D MCF_REG08(0xEC09401B)
-+#define MCF_GPIO_PPDSDR_E MCF_REG08(0xEC09401C)
-+#define MCF_GPIO_PPDSDR_F MCF_REG08(0xEC09401D)
-+#define MCF_GPIO_PPDSDR_G MCF_REG08(0xEC09401E)
-+#define MCF_GPIO_PPDSDR_H MCF_REG08(0xEC09401F)
-+#define MCF_GPIO_PPDSDR_I MCF_REG08(0xEC094020)
-+#define MCF_GPIO_PPDSDR_J MCF_REG08(0xEC094021)
-+#define MCF_GPIO_PPDSDR_K MCF_REG08(0xEC094022)
-+
-+#define MCF_GPIO_PCLRR_A MCF_REG08(0xEC094024)
-+#define MCF_GPIO_PCLRR_B MCF_REG08(0xEC094025)
-+#define MCF_GPIO_PCLRR_C MCF_REG08(0xEC094026)
-+#define MCF_GPIO_PCLRR_D MCF_REG08(0xEC094027)
-+#define MCF_GPIO_PCLRR_E MCF_REG08(0xEC094028)
-+#define MCF_GPIO_PCLRR_F MCF_REG08(0xEC094029)
-+#define MCF_GPIO_PCLRR_G MCF_REG08(0xEC09402A)
-+#define MCF_GPIO_PCLRR_H MCF_REG08(0xEC09402B)
-+#define MCF_GPIO_PCLRR_I MCF_REG08(0xEC09402C)
-+#define MCF_GPIO_PCLRR_J MCF_REG08(0xEC09402D)
-+#define MCF_GPIO_PCLRR_K MCF_REG08(0xEC09402E)
-+
-+#define MCF_GPIO_PCR_A MCF_REG16(0xEC094030)
-+#define MCF_GPIO_PCR_B MCF_REG16(0xEC094032)
-+#define MCF_GPIO_PCR_C MCF_REG16(0xEC094034)
-+#define MCF_GPIO_PCR_D MCF_REG16(0xEC094036)
-+#define MCF_GPIO_PCR_E MCF_REG16(0xEC094038)
-+#define MCF_GPIO_PCR_F MCF_REG16(0xEC09403A)
-+#define MCF_GPIO_PCR_G MCF_REG16(0xEC09403C)
-+
-+#define MCF_GPIO_PCR_H MCF_REG16(0xEC09403E)
-+#define MCF_GPIO_PCR_I MCF_REG16(0xEC094040)
-+#define MCF_GPIO_PCR_J MCF_REG16(0xEC094042)
-+#define MCF_GPIO_PCR_K MCF_REG16(0xEC094044)
-+
-+#define MCF_GPIO_PODR_G4_VAL (0x01 << 4)
-+#define MCF_GPIO_PODR_G4_MASK (0xff & ~MCF_GPIO_PODR_G4_VAL)
-+#define MCF_GPIO_PDDR_G4_OUTPUT (0x01 << 4)
-+#define MCF_GPIO_PDDR_G4_MASK (0xff & ~MCF_GPIO_PDDR_G4_OUTPUT)
-+
-+#define MCF_GPIO_PAR_FBCTL MCF_REG08(0xEC094048)
-+#define MCF_GPIO_PAR_BE MCF_REG08(0xEC094049)
-+#define MCF_GPIO_PAR_CS MCF_REG08(0xEC09404A)
-+#define MCF_GPIO_PAR_CANI2C MCF_REG08(0xEC09404B)
-+#define MCF_GPIO_PAR_IRQ0H MCF_REG08(0xEC09404C)
-+#define MCF_GPIO_PAR_IRQ0L MCF_REG08(0xEC09404D)
-+#define MCF_GPIO_PAR_DSPI0WH MCF_REG08(0xEC09404E)
-+#define MCF_GPIO_PAR_DSPI0WL MCF_REG08(0xEC09404F)
-+#define MCF_GPIO_PAR_TIMER MCF_REG08(0xEC094050)
-+#define MCF_GPIO_PAR_UART2 MCF_REG08(0xEC094051)
-+#define MCF_GPIO_PAR_UART1 MCF_REG08(0xEC094052)
-+#define MCF_GPIO_PAR_UART0 MCF_REG08(0xEC094053)
-+#define MCF_GPIO_PAR_ESDHCH MCF_REG08(0xEC094054)
-+#define MCF_GPIO_PAR_ESDHCL MCF_REG08(0xEC094055)
-+#define MCF_GPIO_PAR_SIMP0H MCF_REG08(0xEC094056)
-+#define MCF_GPIO_PAR_SIMP0L MCF_REG08(0xEC094057)
-+#define MCF_GPIO_PAR_SSI0H MCF_REG08(0xEC094058)
-+#define MCF_GPIO_PAR_SSI0L MCF_REG08(0xEC094059)
-+#define MCF_GPIO_PAR_DBGH1 MCF_REG08(0xEC09405A)
-+#define MCF_GPIO_PAR_DBGH0 MCF_REG08(0xEC09405B)
-+#define MCF_GPIO_PAR_DBGL MCF_REG08(0xEC09405C)
-+#define MCF_GPIO_PAR_FEC MCF_REG08(0xEC09405E)
-+#define MCF_GPIO_MSCR_SDRAMC MCF_REG08(0xEC094064)
-+#define MCF_GPIO_SRCR_FB1 MCF_REG08(0xEC094064)
-+#define MCF_GPIO_SRCR_FB2 MCF_REG08(0xEC094065)
-+#define MCF_GPIO_SRCR_FB3 MCF_REG08(0xEC094066)
-+#define MCF_GPIO_SRCR_FB4 MCF_REG08(0xEC094067)
-+#define MCF_GPIO_SRCR_DSPI0W MCF_REG08(0xEC094068)
-+#define MCF_GPIO_SRCR_CANI2C MCF_REG08(0xEC094069)
-+#define MCF_GPIO_SRCR_IRQ0 MCF_REG08(0xEC09406A)
-+#define MCF_GPIO_SRCR_TIMER MCF_REG08(0xEC09406B)
-+#define MCF_GPIO_SRCR_UART MCF_REG08(0xEC09406C)
-+#define MCF_GPIO_SRCR_FEC MCF_REG08(0xEC09406D)
-+#define MCF_GPIO_SRCR_SDHC MCF_REG08(0xEC09406E)
-+#define MCF_GPIO_SRCR_SIM0 MCF_REG08(0xEC09406F)
-+#define MCF_GPIO_SRCR_SSI0 MCF_REG08(0xEC094070)
-+
-+#define MCF_GPIO_PAR_FBCTL_ALE(x) (((x)&3)<<6)
-+#define MCF_GPIO_PAR_FBCTL_ALE_MASK (0x3F)
-+#define MCF_GPIO_PAR_FBCTL_ALE_FB_ALE (0xC0)
-+#define MCF_GPIO_PAR_FBCTL_ALE_FB_TS (0x80)
-+#define MCF_GPIO_PAR_FBCTL_ALE_GPIO (0x00)
-+#define MCF_GPIO_PAR_FBCTL_OE(x) (((x)&3)<<4)
-+#define MCF_GPIO_PAR_FBCTL_OE_MASK (0xCF)
-+#define MCF_GPIO_PAR_FBCTL_OE_FB_OE (0x30)
-+#define MCF_GPIO_PAR_FBCTL_OE_FB_TBST (0x20)
-+#define MCF_GPIO_PAR_FBCTL_OE_NFC_RE (0x20)
-+#define MCF_GPIO_PAR_FBCTL_OE_GPIO (0x00)
-+#define MCF_GPIO_PAR_FBCTL_FBCLK (0x08)
-+#define MCF_GPIO_PAR_FBCTL_RW (0x04)
-+#define MCF_GPIO_PAR_FBCTL_TA(x) ((x)&3)
-+#define MCF_GPIO_PAR_FBCTL_TA_MASK (0xFC)
-+#define MCF_GPIO_PAR_FBCTL_TA_TA (0x03)
-+#define MCF_GPIO_PAR_FBCTL_TA_NFC_RB (0x01)
-+#define MCF_GPIO_PAR_FBCTL_TA_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_BE_BE3_MASK (0x3F)
-+#define MCF_GPIO_PAR_BE_BE3_BE3 (0xC0)
-+#define MCF_GPIO_PAR_BE_BE3_CS3 (0x80)
-+#define MCF_GPIO_PAR_BE_BE3_FB_A1 (0x40)
-+#define MCF_GPIO_PAR_BE_BE3_NFC_ALE (0x40)
-+#define MCF_GPIO_PAR_BE_BE3_GPIO (0x00)
-+#define MCF_GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_BE_BE2_MASK (0xCF)
-+#define MCF_GPIO_PAR_BE_BE2_BE2 (0x30)
-+#define MCF_GPIO_PAR_BE_BE2_CS2 (0x20)
-+#define MCF_GPIO_PAR_BE_BE2_FB_A0 (0x10)
-+#define MCF_GPIO_PAR_BE_BE2_NFC_CLE (0x10)
-+#define MCF_GPIO_PAR_BE_BE2_GPIO (0x00)
-+#define MCF_GPIO_PAR_BE_BS1(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_BE_BE1_MASK (0xF3)
-+#define MCF_GPIO_PAR_BE_BE1_BE1 (0x0C)
-+#define MCF_GPIO_PAR_BE_BE1_FB_TSZ1 (0x08)
-+#define MCF_GPIO_PAR_BE_BE1_GPIO (0x00)
-+#define MCF_GPIO_PAR_BE_BS0(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_BE_BE0_MASK (0xFC)
-+#define MCF_GPIO_PAR_BE_BE0_BE0 (0x03)
-+#define MCF_GPIO_PAR_BE_BE0_FB_TSZ0 (0x02)
-+#define MCF_GPIO_PAR_BE_BE0_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_CS_CS5(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_CS_CS5_MASK (0x3F)
-+#define MCF_GPIO_PAR_CS_CS5_CS5 (0xC0)
-+#define MCF_GPIO_PAR_CS_CS5_DACK1 (0x80)
-+#define MCF_GPIO_PAR_CS_CS5_GPIO (0x00)
-+#define MCF_GPIO_PAR_CS_CS4(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_CS_CS4_MASK (0xCF)
-+#define MCF_GPIO_PAR_CS_CS4_CS4 (0x30)
-+#define MCF_GPIO_PAR_CS_CS4_DREQ1 (0x20)
-+#define MCF_GPIO_PAR_CS_CS4_GPIO (0x00)
-+#define MCF_GPIO_PAR_CS_CS1(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_CS_CS1_MASK (0xF3)
-+#define MCF_GPIO_PAR_CS_CS1_CS1 (0x0C)
-+#define MCF_GPIO_PAR_CS_CS1_NFC_CE (0x04)
-+#define MCF_GPIO_PAR_CS_CS1_GPIO (0x00)
-+#define MCF_GPIO_PAR_CS_CS0_CS0 (0x01)
-+
-+#define MCF_GPIO_PAR_CANI2C_I2C0SCL(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SCL_MASK (0x3F)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SCL_I2C0SCL (0xC0)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SCL_U8TXD (0x80)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SCL_CAN0TX (0x40)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SCL_GPIO (0x00)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SDA(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SDA_MASK (0xCF)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SDA_I2C0SDA (0x30)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SDA_U8RXD (0x20)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SDA_CAN0RX (0x10)
-+#define MCF_GPIO_PAR_CANI2C_I2C0SDA_GPIO (0x00)
-+#define MCF_GPIO_PAR_CANI2C_CAN1TX(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_CANI2C_CAN1TX_MASK (0xF3)
-+#define MCF_GPIO_PAR_CANI2C_CAN1TX_CAN1TX (0x0C)
-+#define MCF_GPIO_PAR_CANI2C_CAN1TX_U9TXD (0x08)
-+#define MCF_GPIO_PAR_CANI2C_CAN1TX_I2C1SCL (0x04)
-+#define MCF_GPIO_PAR_CANI2C_CAN1TX_GPIO (0x00)
-+#define MCF_GPIO_PAR_CANI2C_CAN1RX(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_CANI2C_CAN1RX_MASK (0xFC)
-+#define MCF_GPIO_PAR_CANI2C_CAN1RX_CAN1RX (0x03)
-+#define MCF_GPIO_PAR_CANI2C_CAN1RX_U9RXD (0x02)
-+#define MCF_GPIO_PAR_CANI2C_CAN1RX_I2C1SDA (0x01)
-+#define MCF_GPIO_PAR_CANI2C_CAN1RX_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_IRQH_IRQ7 (0x10)
-+#define MCF_GPIO_PAR_IRQH_IRQ4(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_IRQH_IRQ4_MASK (0xF3)
-+#define MCF_GPIO_PAR_IRQH_IRQ4_IRQ4 (0x0C)
-+#define MCF_GPIO_PAR_IRQH_IRQ4_DREQ0 (0x08)
-+#define MCF_GPIO_PAR_IRQH_IRQ4_GPIO (0x00)
-+#define MCF_GPIO_PAR_IRQH_IRQ1 (0x01)
-+
-+#define MCF_GPIO_PAR_IRQL_IRQ6(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_IRQL_IRQ6_MASK (0x3F)
-+#define MCF_GPIO_PAR_IRQL_IRQ6_IRQ6 (0xC0)
-+#define MCF_GPIO_PAR_IRQL_IRQ6_USBCLKIN (0x40)
-+#define MCF_GPIO_PAR_IRQL_IRQ6_GPIO (0x00)
-+#define MCF_GPIO_PAR_IRQL_IRQ3(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_IRQL_IRQ3_MASK (0xCF)
-+#define MCF_GPIO_PAR_IRQL_IRQ3_IRQ3 (0x30)
-+#define MCF_GPIO_PAR_IRQL_IRQ3_DSPI0_PCS3 (0x20)
-+#define MCF_GPIO_PAR_IRQL_IRQ3_USB1_VBUS_EN (0x10)
-+#define MCF_GPIO_PAR_IRQL_IRQ3_GPIO (0x00)
-+#define MCF_GPIO_PAR_IRQL_IRQ2(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_IRQL_IRQ2_MASK (0xF3)
-+#define MCF_GPIO_PAR_IRQL_IRQ2_IRQ2 (0x0C)
-+#define MCF_GPIO_PAR_IRQL_IRQ2_DSPI0_PCS2 (0x08)
-+#define MCF_GPIO_PAR_IRQL_IRQ2_USB1_VBUS_OC (0x04)
-+#define MCF_GPIO_PAR_IRQL_IRQ2_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_DSPI0_SIN(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_DSPI0_SIN_MASK (0x3F)
-+#define MCF_GPIO_PAR_DSPI0_SIN_DSPI0SIN (0xC0)
-+#define MCF_GPIO_PAR_DSPI0_SIN_SBF_DI (0xC0)
-+#define MCF_GPIO_PAR_DSPI0_SIN_U3RXD (0x80)
-+#define MCF_GPIO_PAR_DSPI0_SIN_SDHC_CMD (0x40)
-+#define MCF_GPIO_PAR_DSPI0_SIN_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI0_SOUT(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_DSPI0_SOUT_MASK (0xCF)
-+#define MCF_GPIO_PAR_DSPI0_SOUT_DSPI0SOUT (0x30)
-+#define MCF_GPIO_PAR_DSPI0_SOUT_SBF_DO (0x30)
-+#define MCF_GPIO_PAR_DSPI0_SOUT_U3TXD (0x20)
-+#define MCF_GPIO_PAR_DSPI0_SOUT_SDHC_DAT0 (0x10)
-+#define MCF_GPIO_PAR_DSPI0_SOUT_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI0_SCK(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_DSPI0_SCK_MASK (0xF3)
-+#define MCF_GPIO_PAR_DSPI0_SCK_DSPI0SCK (0x0C)
-+#define MCF_GPIO_PAR_DSPI0_SCK_SBF_CK (0x0C)
-+#define MCF_GPIO_PAR_DSPI0_SCK_I2C3SCL (0x08)
-+#define MCF_GPIO_PAR_DSPI0_SCK_SDHC_CLK (0x04)
-+#define MCF_GPIO_PAR_DSPI0_SCK_GPIO (0x00)
-+#define MCF_GPIO_PAR_DSPI0_PCS0(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_DSPI0_PCS0_MASK (0xFC)
-+#define MCF_GPIO_PAR_DSPI0_PCS0_DSPI0PCS0 (0x03)
-+#define MCF_GPIO_PAR_DSPI0_PCS0_SS (0x03)
-+#define MCF_GPIO_PAR_DSPI0_PCS0_I2C3SDA (0x02)
-+#define MCF_GPIO_PAR_DSPI0_PCS0_SDHC_DAT3 (0x01)
-+#define MCF_GPIO_PAR_DSPI0_PCS0_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_DSPIOW_DSPI0PSC1 (0x80)
-+#define MCF_GPIO_PAR_DSPIOW_SBF_CS (0x80)
-+#define MCF_GPIO_PAR_DSPIOW_OWDAT (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_DSPIOW_OWDAT_MASK (0xCF)
-+#define MCF_GPIO_PAR_DSPIOW_OWDAT_OWDAT (0x30)
-+#define MCF_GPIO_PAR_DSPIOW_OWDAT_DACK0 (0x20)
-+#define MCF_GPIO_PAR_DSPIOW_OWDAT_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_TIMER_T3IN_MASK (0x3F)
-+#define MCF_GPIO_PAR_TIMER_T3IN_T3IN (0xC0)
-+#define MCF_GPIO_PAR_TIMER_T3IN_EXTA3 (0xC0)
-+#define MCF_GPIO_PAR_TIMER_T3IN_T3OUT (0x80)
-+#define MCF_GPIO_PAR_TIMER_T3IN_USB0_VBUSEN (0x40)
-+#define MCF_GPIO_PAR_TIMER_T3IN_ULPI_DIR (0x40)
-+#define MCF_GPIO_PAR_TIMER_T3IN_GPIO (0x00)
-+#define MCF_GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_TIMER_T2IN_MASK (0xCF)
-+#define MCF_GPIO_PAR_TIMER_T2IN_T2IN (0x30)
-+#define MCF_GPIO_PAR_TIMER_T2IN_EXTA2 (0x30)
-+#define MCF_GPIO_PAR_TIMER_T2IN_T2OUT (0x20)
-+#define MCF_GPIO_PAR_TIMER_T2IN_SDHC_DAT2 (0x10)
-+#define MCF_GPIO_PAR_TIMER_T2IN_GPIO (0x00)
-+#define MCF_GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_TIMER_T1IN_MASK (0xF3)
-+#define MCF_GPIO_PAR_TIMER_T1IN_T1IN (0x0C)
-+#define MCF_GPIO_PAR_TIMER_T1IN_EXTA1 (0x0C)
-+#define MCF_GPIO_PAR_TIMER_T1IN_T1OUT (0x08)
-+#define MCF_GPIO_PAR_TIMER_T1IN_SDHC_DAT1 (0x04)
-+#define MCF_GPIO_PAR_TIMER_T1IN_GPIO (0x00)
-+#define MCF_GPIO_PAR_TIMER_T0IN(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_TIMER_T0IN_MASK (0xFC)
-+#define MCF_GPIO_PAR_TIMER_T0IN_T0IN (0x03)
-+#define MCF_GPIO_PAR_TIMER_T0IN_EXTA0 (0x03)
-+#define MCF_GPIO_PAR_TIMER_T0IN_T0OUT (0x02)
-+#define MCF_GPIO_PAR_TIMER_T0IN_USBO_VBUSOC (0x01)
-+#define MCF_GPIO_PAR_TIMER_T0IN_ULPI_NXT (0x01)
-+#define MCF_GPIO_PAR_TIMER_T0IN_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_UART2_U2CTS(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_UART2_U2CTS_MASK (0x3F)
-+#define MCF_GPIO_PAR_UART2_U2CTS_U2CTS (0xC0)
-+#define MCF_GPIO_PAR_UART2_U2CTS_U6TXD (0x80)
-+#define MCF_GPIO_PAR_UART2_U2CTS_SSI1_BCLK (0x40)
-+#define MCF_GPIO_PAR_UART2_U2CTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART2_U2RTS(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_UART2_U2RTS_MASK (0xCF)
-+#define MCF_GPIO_PAR_UART2_U2RTS_U2RTS (0x30)
-+#define MCF_GPIO_PAR_UART2_U2RTS_U6RXD (0x20)
-+#define MCF_GPIO_PAR_UART2_U2RTS_SSI1_FS (0x10)
-+#define MCF_GPIO_PAR_UART2_U2RTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART2_U2RXD(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_UART2_U2RXD_MASK (0xF3)
-+#define MCF_GPIO_PAR_UART2_U2RXD_U2RXD (0x0C)
-+#define MCF_GPIO_PAR_UART2_U2RXD_PWM_A3 (0x08)
-+#define MCF_GPIO_PAR_UART2_U2RXD_SSI1_RXD (0x04)
-+#define MCF_GPIO_PAR_UART2_U2RXD_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART2_U2TXD(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_UART2_U2TXD_MASK (0xFC)
-+#define MCF_GPIO_PAR_UART2_U2TXD_U2TXD (0x03)
-+#define MCF_GPIO_PAR_UART2_U2TXD_PWM_B3 (0x02)
-+#define MCF_GPIO_PAR_UART2_U2TXD_SSI1_TXD (0x01)
-+#define MCF_GPIO_PAR_UART2_U2TXD_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_UART1_U1CTS(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_UART1_U1CTS_MASK (0x3F)
-+#define MCF_GPIO_PAR_UART1_U1CTS_U1CTS (0xC0)
-+#define MCF_GPIO_PAR_UART1_U1CTS_U5TXD (0x80)
-+#define MCF_GPIO_PAR_UART1_U1CTS_DSPI3_SCK (0x40)
-+#define MCF_GPIO_PAR_UART1_U1CTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART1_U1RTS(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_UART1_U1RTS_MASK (0xCF)
-+#define MCF_GPIO_PAR_UART1_U1RTS_U1RTS (0x30)
-+#define MCF_GPIO_PAR_UART1_U1RTS_U5RXD (0x20)
-+#define MCF_GPIO_PAR_UART1_U1RTS_DSPI3_PCS0 (0x10)
-+#define MCF_GPIO_PAR_UART1_U1RTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART1_U1RXD(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_UART1_U1RXD_MASK (0xF3)
-+#define MCF_GPIO_PAR_UART1_U1RXD_U1RXD (0x0C)
-+#define MCF_GPIO_PAR_UART1_U1RXD_I2C5SDA (0x08)
-+#define MCF_GPIO_PAR_UART1_U1RXD_DSPI3_SIN (0x04)
-+#define MCF_GPIO_PAR_UART1_U1RXD_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART1_U1TXD(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_UART1_U1TXD_MASK (0xFC)
-+#define MCF_GPIO_PAR_UART1_U1TXD_U1TXD (0x03)
-+#define MCF_GPIO_PAR_UART1_U1TXD_I2C5SCL (0x02)
-+#define MCF_GPIO_PAR_UART1_U1TXD_DSPI3_SOUT (0x01)
-+#define MCF_GPIO_PAR_UART1_U1TXD_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_UART0_U0CTS(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_UART0_U0CTS_MASK (0x3F)
-+#define MCF_GPIO_PAR_UART0_U0CTS_U0CTS (0xC0)
-+#define MCF_GPIO_PAR_UART0_U0CTS_U4TXD (0x80)
-+#define MCF_GPIO_PAR_UART0_U0CTS_DSPI2_SCK (0x40)
-+#define MCF_GPIO_PAR_UART0_U0CTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART0_U0RTS(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_UART0_U0RTS_MASK (0xCF)
-+#define MCF_GPIO_PAR_UART0_U0RTS_U0RTS (0x30)
-+#define MCF_GPIO_PAR_UART0_U0RTS_U4RXD (0x20)
-+#define MCF_GPIO_PAR_UART0_U0RTS_DSPI2_PCS0 (0x10)
-+#define MCF_GPIO_PAR_UART0_U0RTS_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART0_U0RXD(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_UART0_U0RXD_MASK (0xF3)
-+#define MCF_GPIO_PAR_UART0_U0RXD_U0RXD (0x0C)
-+#define MCF_GPIO_PAR_UART0_U0RXD_I2C4SDA (0x08)
-+#define MCF_GPIO_PAR_UART0_U0RXD_DSPI2_SIN (0x04)
-+#define MCF_GPIO_PAR_UART0_U0RXD_GPIO (0x00)
-+#define MCF_GPIO_PAR_UART0_U0TXD(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_UART0_U0TXD_MASK (0xFC)
-+#define MCF_GPIO_PAR_UART0_U0TXD_U0TXD (0x03)
-+#define MCF_GPIO_PAR_UART0_U0TXD_I2C4SCL (0x02)
-+#define MCF_GPIO_PAR_UART0_U0TXD_DSPI2_SOUT (0x01)
-+#define MCF_GPIO_PAR_UART0_U0TXD_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_SDHCH_DAT3(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_SDHCH_DAT3_MASK (0x3F)
-+#define MCF_GPIO_PAR_SDHCH_DAT3_DAT3 (0xC0)
-+#define MCF_GPIO_PAR_SDHCH_DAT3_PWM_A1 (0x80)
-+#define MCF_GPIO_PAR_SDHCH_DAT3_DSPI1_PCS0 (0x40)
-+#define MCF_GPIO_PAR_SDHCH_DAT3_GPIO (0x00)
-+#define MCF_GPIO_PAR_SDHCH_DAT2(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_SDHCH_DAT2_MASK (0xCF)
-+#define MCF_GPIO_PAR_SDHCH_DAT2_DAT2 (0x30)
-+#define MCF_GPIO_PAR_SDHCH_DAT2_PWM_B1 (0x20)
-+#define MCF_GPIO_PAR_SDHCH_DAT2_DSPI1_PCS2 (0x10)
-+#define MCF_GPIO_PAR_SDHCH_DAT2_GPIO (0x00)
-+#define MCF_GPIO_PAR_SDHCH_DAT1(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_SDHCH_DAT1_MASK (0xF3)
-+#define MCF_GPIO_PAR_SDHCH_DAT1_DAT1 (0x0C)
-+#define MCF_GPIO_PAR_SDHCH_DAT1_PWM_A2 (0x08)
-+#define MCF_GPIO_PAR_SDHCH_DAT1_DSPI1_PCS1 (0x04)
-+#define MCF_GPIO_PAR_SDHCH_DAT1_GPIO (0x00)
-+#define MCF_GPIO_PAR_SDHCH_DAT0(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_SDHCH_DAT0_MASK (0xFC)
-+#define MCF_GPIO_PAR_SDHCH_DAT0_DAT0 (0x03)
-+#define MCF_GPIO_PAR_SDHCH_DAT0_PWM_B2 (0x02)
-+#define MCF_GPIO_PAR_SDHCH_DAT0_DSPI1_SOUT (0x01)
-+#define MCF_GPIO_PAR_SDHCH_DAT0_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_SDHCL_CMD(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_SDHCL_CMD_MASK (0xF3)
-+#define MCF_GPIO_PAR_SDHCL_CMD_CMD (0x0C)
-+#define MCF_GPIO_PAR_SDHCL_CMD_PWM_A0 (0x08)
-+#define MCF_GPIO_PAR_SDHCL_CMD_DSPI1_SIN (0x04)
-+#define MCF_GPIO_PAR_SDHCL_CMD_GPIO (0x00)
-+#define MCF_GPIO_PAR_SDHCL_CLK(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_SDHCL_CLK_MASK (0xFC)
-+#define MCF_GPIO_PAR_SDHCL_CLK_CLK (0x03)
-+#define MCF_GPIO_PAR_SDHCL_CLK_PWM_B0 (0x02)
-+#define MCF_GPIO_PAR_SDHCL_CLK_DSPI1_SCK (0x01)
-+#define MCF_GPIO_PAR_SDHCL_CLK_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_SIMP0H_DAT(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_SIMP0H_DAT_MASK (0x3F)
-+#define MCF_GPIO_PAR_SIMP0H_DAT_DAT (0xC0)
-+#define MCF_GPIO_PAR_SIMP0H_DAT_PWM_FAULT2 (0x80)
-+#define MCF_GPIO_PAR_SIMP0H_DAT_SDHC_DAT7 (0x40)
-+#define MCF_GPIO_PAR_SIMP0H_DAT_GPIO (0x00)
-+#define MCF_GPIO_PAR_SIMP0H_VEN(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_SIMP0H_VEN_MASK (0xCF)
-+#define MCF_GPIO_PAR_SIMP0H_VEN_VEN (0x30)
-+#define MCF_GPIO_PAR_SIMP0H_VEN_PWM_FAULT0 (0x20)
-+#define MCF_GPIO_PAR_SIMP0H_VEN_GPIO (0x00)
-+#define MCF_GPIO_PAR_SIMP0H_RST(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_SIMP0H_RST_MASK (0xF3)
-+#define MCF_GPIO_PAR_SIMP0H_RST_RST (0x0C)
-+#define MCF_GPIO_PAR_SIMP0H_RST_PWM_FORCE (0x08)
-+#define MCF_GPIO_PAR_SIMP0H_RST_SDHC_DAT6 (0x04)
-+#define MCF_GPIO_PAR_SIMP0H_RST_GPIO (0x00)
-+#define MCF_GPIO_PAR_SIMP0H_PD(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_SIMP0H_PD_MASK (0xFC)
-+#define MCF_GPIO_PAR_SIMP0H_PD_PD (0x03)
-+#define MCF_GPIO_PAR_SIMP0H_PD_PWM_SYNC (0x02)
-+#define MCF_GPIO_PAR_SIMP0H_PD_SDHC_DAT5 (0x01)
-+#define MCF_GPIO_PAR_SIMP0H_PD_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_SIMP0L_CLK(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_SIMP0L_CLK_MASK (0xFC)
-+#define MCF_GPIO_PAR_SIMP0L_CLK_CLK (0x03)
-+#define MCF_GPIO_PAR_SIMP0L_CLK_PWM_FAULT1 (0x02)
-+#define MCF_GPIO_PAR_SIMP0L_CLK_SDHC_DAT4 (0x01)
-+#define MCF_GPIO_PAR_SIMP0L_CLK_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_SSI0H_RXD(x) (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_SSI0H_RXD_MASK (0x3F)
-+#define MCF_GPIO_PAR_SSI0H_RXD_RXD (0xC0)
-+#define MCF_GPIO_PAR_SSI0H_RXD_I2C2SDA (0x80)
-+#define MCF_GPIO_PAR_SSI0H_RXD_SIM1_VEN (0x40)
-+#define MCF_GPIO_PAR_SSI0H_RXD_GPIO (0x00)
-+#define MCF_GPIO_PAR_SSI0H_TXD(x) (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_SSI0H_TXD_MASK (0xCF)
-+#define MCF_GPIO_PAR_SSI0H_TXD_TXD (0x30)
-+#define MCF_GPIO_PAR_SSI0H_TXD_I2C2SCL (0x20)
-+#define MCF_GPIO_PAR_SSI0H_TXD_SIM1_DAT (0x10)
-+#define MCF_GPIO_PAR_SSI0H_TXD_GPIO (0x00)
-+#define MCF_GPIO_PAR_SSI0H_FS(x) (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_SSI0H_FS_MASK (0xF3)
-+#define MCF_GPIO_PAR_SSI0H_FS_FS (0x0C)
-+#define MCF_GPIO_PAR_SSI0H_FS_U7TXD (0x08)
-+#define MCF_GPIO_PAR_SSI0H_FS_SIM1_RST (0x04)
-+#define MCF_GPIO_PAR_SSI0H_FS_GPIO (0x00)
-+#define MCF_GPIO_PAR_SSI0H_MCLK(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_SSI0H_MCLK_MASK (0xFC)
-+#define MCF_GPIO_PAR_SSI0H_MCLK_MCLK (0x03)
-+#define MCF_GPIO_PAR_SSI0H_MCLK_SSI_CLKIN (0x02)
-+#define MCF_GPIO_PAR_SSI0H_MCLK_SIM1_CLK (0x01)
-+#define MCF_GPIO_PAR_SSI0H_MCLK_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_SSI0L_BCLK(x) ((x)&0x03)
-+#define MCF_GPIO_PAR_SSI0L_BCLK_MASK (0xFC)
-+#define MCF_GPIO_PAR_SSI0L_BCLK_BCLK (0x03)
-+#define MCF_GPIO_PAR_SSI0L_BCLK_U7RXD (0x02)
-+#define MCF_GPIO_PAR_SSI0L_BCLK_SIM1_PD (0x01)
-+#define MCF_GPIO_PAR_SSI0L_BCLK_GPIO (0x00)
-+
-+#define MCF_GPIO_PAR_DEBUGH1_DAT3 (0x40)
-+#define MCF_GPIO_PAR_DEBUGH1_DAT2 (0x10)
-+#define MCF_GPIO_PAR_DEBUGH1_DAT1 (0x04)
-+#define MCF_GPIO_PAR_DEBUGH1_DAT0 (0x01)
-+
-+#define MCF_GPIO_PAR_DEBUGH0_PST3 (0x40)
-+#define MCF_GPIO_PAR_DEBUGH0_PST2 (0x10)
-+#define MCF_GPIO_PAR_DEBUGH0_PST1 (0x04)
-+#define MCF_GPIO_PAR_DEBUGH0_PST0 (0x01)
-+
-+#define MCF_GPIO_PAR_DEBUGL_ALLPST (0x01)
-+
-+#define MCF_GPIO_PAR_FEC_FEC(x) ((x)&0x0F)
-+#define MCF_GPIO_PAR_FEC_FEC_MASK (0xF0)
-+#define MCF_GPIO_PAR_FEC_FEC_GPIO (0x0D)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII1 (0x0C)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII1FUL (0x0B)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII_ULPI (0x0A)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII0 (0x09)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII0FUL_ULPI (0x08)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII0FUL (0x07)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII0_1FUL (0x06)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII0FUL_1 (0x05) /* 0:Full 1: */
-+/* Both 0&1: MDC, MDIO, COL & TXER - GPIO */
-+#define MCF_GPIO_PAR_FEC_FEC_RMII0_1 (0x04)
-+#define MCF_GPIO_PAR_FEC_FEC_RMII0FUL_1FUL (0x03)
-+#define MCF_GPIO_PAR_FEC_FEC_MII (0x01) /* MDC & MDIO - GPIO */
-+#define MCF_GPIO_PAR_FEC_FEC_MIIFUL (0x00)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5441X_GPIO_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_intc.h
-@@ -0,0 +1,727 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_INTC_H__
-+#define __MCF5441X_INTC_H__
-+
-+/*********************************************************************
-+*
-+* Interrupt Controller (INTC)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_INTC0_IPRH MCF_REG32(0xFC048000)
-+#define MCF_INTC0_IPRL MCF_REG32(0xFC048004)
-+#define MCF_INTC0_IMRH MCF_REG32(0xFC048008)
-+#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C)
-+#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010)
-+#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014)
-+#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A)
-+#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C)
-+#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D)
-+#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E)
-+#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F)
-+#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041)
-+#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042)
-+#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043)
-+#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044)
-+#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045)
-+#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046)
-+#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047)
-+#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048)
-+#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049)
-+#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A)
-+#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B)
-+#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C)
-+#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D)
-+#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E)
-+#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F)
-+#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050)
-+#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051)
-+#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052)
-+#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053)
-+#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054)
-+#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055)
-+#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056)
-+#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057)
-+#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058)
-+#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059)
-+#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A)
-+#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B)
-+#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C)
-+#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D)
-+#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E)
-+#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F)
-+#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060)
-+#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061)
-+#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062)
-+#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063)
-+#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064)
-+#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065)
-+#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066)
-+#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067)
-+#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068)
-+#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069)
-+#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A)
-+#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B)
-+#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C)
-+#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D)
-+#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E)
-+#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F)
-+#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070)
-+#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071)
-+#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072)
-+#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073)
-+#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074)
-+#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075)
-+#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076)
-+#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077)
-+#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078)
-+#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079)
-+#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A)
-+#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B)
-+#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C)
-+#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D)
-+#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E)
-+#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F)
-+#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0)
-+#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4)
-+#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8)
-+#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC)
-+#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0)
-+#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4)
-+#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8)
-+#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC)
-+#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000)
-+#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004)
-+#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008)
-+#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C)
-+#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010)
-+#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014)
-+#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A)
-+#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C)
-+#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D)
-+#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E)
-+#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F)
-+#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041)
-+#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042)
-+#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043)
-+#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044)
-+#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045)
-+#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046)
-+#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047)
-+#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048)
-+#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049)
-+#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A)
-+#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B)
-+#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C)
-+#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D)
-+#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E)
-+#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F)
-+#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050)
-+#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051)
-+#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052)
-+#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053)
-+#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054)
-+#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055)
-+#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056)
-+#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057)
-+#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058)
-+#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059)
-+#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A)
-+#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B)
-+#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C)
-+#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D)
-+#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E)
-+#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F)
-+#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060)
-+#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061)
-+#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062)
-+#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063)
-+#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064)
-+#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065)
-+#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066)
-+#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067)
-+#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068)
-+#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069)
-+#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A)
-+#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B)
-+#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C)
-+#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D)
-+#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E)
-+#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F)
-+#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070)
-+#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071)
-+#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072)
-+#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073)
-+#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074)
-+#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075)
-+#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076)
-+#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077)
-+#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078)
-+#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079)
-+#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A)
-+#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B)
-+#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C)
-+#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D)
-+#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E)
-+#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F)
-+#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0)
-+#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4)
-+#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8)
-+#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC)
-+#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0)
-+#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4)
-+#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8
-+#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC)
-+
-+#define MCF_INTC2_SIMR MCF_REG08(0xFC05001C)
-+#define MCF_INTC2_CIMR MCF_REG08(0xFC05001D)
-+#define MCF_INTC2_ICR31 MCF_REG08(0xFC05005F)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048041+((x-1)*0x001))
-+#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x-1)*0x004))
-+#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C041+((x-1)*0x001))
-+#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x-1)*0x004))
-+#define MCF_INTC2_ICR(x) MCF_REG08(0xFC050041+((x-1)*0x001))
-+
-+/* Parameterized register read/write macros for multiple modules */
-+#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000))
-+#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000))
-+#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000))
-+#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000))
-+#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000))
-+#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000))
-+#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000))
-+#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000))
-+#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000))
-+#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000))
-+#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000))
-+#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000))
-+#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000))
-+#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000))
-+#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000))
-+#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000))
-+#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000))
-+#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000))
-+#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000))
-+#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000))
-+#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000))
-+#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000))
-+#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000))
-+#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000))
-+#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000))
-+#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000))
-+#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000))
-+#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000))
-+#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000))
-+#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000))
-+#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000))
-+#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000))
-+#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000))
-+#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000))
-+#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000))
-+#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000))
-+#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000))
-+#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000))
-+#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000))
-+#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000))
-+#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000))
-+#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000))
-+#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000))
-+#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000))
-+#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000))
-+#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000))
-+#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000))
-+#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000))
-+#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000))
-+#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000))
-+#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000))
-+#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000))
-+#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000))
-+#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000))
-+#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000))
-+#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000))
-+#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000))
-+#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000))
-+#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000))
-+#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000))
-+#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000))
-+#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000))
-+#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000))
-+#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000))
-+#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000))
-+#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000))
-+#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000))
-+#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000))
-+#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000))
-+#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000))
-+#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000))
-+#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000))
-+#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000))
-+#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000))
-+#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000))
-+#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000))
-+#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000))
-+#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000))
-+#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000))
-+#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000))
-+#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000))
-+#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000))
-+
-+/* Bit definitions and macros for IPRH */
-+#define MCF_INTC_IPRH_INT32 (0x00000001)
-+#define MCF_INTC_IPRH_INT33 (0x00000002)
-+#define MCF_INTC_IPRH_INT34 (0x00000004)
-+#define MCF_INTC_IPRH_INT35 (0x00000008)
-+#define MCF_INTC_IPRH_INT36 (0x00000010)
-+#define MCF_INTC_IPRH_INT37 (0x00000020)
-+#define MCF_INTC_IPRH_INT38 (0x00000040)
-+#define MCF_INTC_IPRH_INT39 (0x00000080)
-+#define MCF_INTC_IPRH_INT40 (0x00000100)
-+#define MCF_INTC_IPRH_INT41 (0x00000200)
-+#define MCF_INTC_IPRH_INT42 (0x00000400)
-+#define MCF_INTC_IPRH_INT43 (0x00000800)
-+#define MCF_INTC_IPRH_INT44 (0x00001000)
-+#define MCF_INTC_IPRH_INT45 (0x00002000)
-+#define MCF_INTC_IPRH_INT46 (0x00004000)
-+#define MCF_INTC_IPRH_INT47 (0x00008000)
-+#define MCF_INTC_IPRH_INT48 (0x00010000)
-+#define MCF_INTC_IPRH_INT49 (0x00020000)
-+#define MCF_INTC_IPRH_INT50 (0x00040000)
-+#define MCF_INTC_IPRH_INT51 (0x00080000)
-+#define MCF_INTC_IPRH_INT52 (0x00100000)
-+#define MCF_INTC_IPRH_INT53 (0x00200000)
-+#define MCF_INTC_IPRH_INT54 (0x00400000)
-+#define MCF_INTC_IPRH_INT55 (0x00800000)
-+#define MCF_INTC_IPRH_INT56 (0x01000000)
-+#define MCF_INTC_IPRH_INT57 (0x02000000)
-+#define MCF_INTC_IPRH_INT58 (0x04000000)
-+#define MCF_INTC_IPRH_INT59 (0x08000000)
-+#define MCF_INTC_IPRH_INT60 (0x10000000)
-+#define MCF_INTC_IPRH_INT61 (0x20000000)
-+#define MCF_INTC_IPRH_INT62 (0x40000000)
-+#define MCF_INTC_IPRH_INT63 (0x80000000)
-+
-+/* Bit definitions and macros for IPRL */
-+#define MCF_INTC_IPRL_INT0 (0x00000001)
-+#define MCF_INTC_IPRL_INT1 (0x00000002)
-+#define MCF_INTC_IPRL_INT2 (0x00000004)
-+#define MCF_INTC_IPRL_INT3 (0x00000008)
-+#define MCF_INTC_IPRL_INT4 (0x00000010)
-+#define MCF_INTC_IPRL_INT5 (0x00000020)
-+#define MCF_INTC_IPRL_INT6 (0x00000040)
-+#define MCF_INTC_IPRL_INT7 (0x00000080)
-+#define MCF_INTC_IPRL_INT8 (0x00000100)
-+#define MCF_INTC_IPRL_INT9 (0x00000200)
-+#define MCF_INTC_IPRL_INT10 (0x00000400)
-+#define MCF_INTC_IPRL_INT11 (0x00000800)
-+#define MCF_INTC_IPRL_INT12 (0x00001000)
-+#define MCF_INTC_IPRL_INT13 (0x00002000)
-+#define MCF_INTC_IPRL_INT14 (0x00004000)
-+#define MCF_INTC_IPRL_INT15 (0x00008000)
-+#define MCF_INTC_IPRL_INT16 (0x00010000)
-+#define MCF_INTC_IPRL_INT17 (0x00020000)
-+#define MCF_INTC_IPRL_INT18 (0x00040000)
-+#define MCF_INTC_IPRL_INT19 (0x00080000)
-+#define MCF_INTC_IPRL_INT20 (0x00100000)
-+#define MCF_INTC_IPRL_INT21 (0x00200000)
-+#define MCF_INTC_IPRL_INT22 (0x00400000)
-+#define MCF_INTC_IPRL_INT23 (0x00800000)
-+#define MCF_INTC_IPRL_INT24 (0x01000000)
-+#define MCF_INTC_IPRL_INT25 (0x02000000)
-+#define MCF_INTC_IPRL_INT26 (0x04000000)
-+#define MCF_INTC_IPRL_INT27 (0x08000000)
-+#define MCF_INTC_IPRL_INT28 (0x10000000)
-+#define MCF_INTC_IPRL_INT29 (0x20000000)
-+#define MCF_INTC_IPRL_INT30 (0x40000000)
-+#define MCF_INTC_IPRL_INT31 (0x80000000)
-+
-+/* Bit definitions and macros for IMRH */
-+#define MCF_INTC_IMRH_INT_MASK32 (0x00000001)
-+#define MCF_INTC_IMRH_INT_MASK33 (0x00000002)
-+#define MCF_INTC_IMRH_INT_MASK34 (0x00000004)
-+#define MCF_INTC_IMRH_INT_MASK35 (0x00000008)
-+#define MCF_INTC_IMRH_INT_MASK36 (0x00000010)
-+#define MCF_INTC_IMRH_INT_MASK37 (0x00000020)
-+#define MCF_INTC_IMRH_INT_MASK38 (0x00000040)
-+#define MCF_INTC_IMRH_INT_MASK39 (0x00000080)
-+#define MCF_INTC_IMRH_INT_MASK40 (0x00000100)
-+#define MCF_INTC_IMRH_INT_MASK41 (0x00000200)
-+#define MCF_INTC_IMRH_INT_MASK42 (0x00000400)
-+#define MCF_INTC_IMRH_INT_MASK43 (0x00000800)
-+#define MCF_INTC_IMRH_INT_MASK44 (0x00001000)
-+#define MCF_INTC_IMRH_INT_MASK45 (0x00002000)
-+#define MCF_INTC_IMRH_INT_MASK46 (0x00004000)
-+#define MCF_INTC_IMRH_INT_MASK47 (0x00008000)
-+#define MCF_INTC_IMRH_INT_MASK48 (0x00010000)
-+#define MCF_INTC_IMRH_INT_MASK49 (0x00020000)
-+#define MCF_INTC_IMRH_INT_MASK50 (0x00040000)
-+#define MCF_INTC_IMRH_INT_MASK51 (0x00080000)
-+#define MCF_INTC_IMRH_INT_MASK52 (0x00100000)
-+#define MCF_INTC_IMRH_INT_MASK53 (0x00200000)
-+#define MCF_INTC_IMRH_INT_MASK54 (0x00400000)
-+#define MCF_INTC_IMRH_INT_MASK55 (0x00800000)
-+#define MCF_INTC_IMRH_INT_MASK56 (0x01000000)
-+#define MCF_INTC_IMRH_INT_MASK57 (0x02000000)
-+#define MCF_INTC_IMRH_INT_MASK58 (0x04000000)
-+#define MCF_INTC_IMRH_INT_MASK59 (0x08000000)
-+#define MCF_INTC_IMRH_INT_MASK60 (0x10000000)
-+#define MCF_INTC_IMRH_INT_MASK61 (0x20000000)
-+#define MCF_INTC_IMRH_INT_MASK62 (0x40000000)
-+#define MCF_INTC_IMRH_INT_MASK63 (0x80000000)
-+
-+/* Bit definitions and macros for IMRL */
-+#define MCF_INTC_IMRL_INT_MASK0 (0x00000001)
-+#define MCF_INTC_IMRL_INT_MASK1 (0x00000002)
-+#define MCF_INTC_IMRL_INT_MASK2 (0x00000004)
-+#define MCF_INTC_IMRL_INT_MASK3 (0x00000008)
-+#define MCF_INTC_IMRL_INT_MASK4 (0x00000010)
-+#define MCF_INTC_IMRL_INT_MASK5 (0x00000020)
-+#define MCF_INTC_IMRL_INT_MASK6 (0x00000040)
-+#define MCF_INTC_IMRL_INT_MASK7 (0x00000080)
-+#define MCF_INTC_IMRL_INT_MASK8 (0x00000100)
-+#define MCF_INTC_IMRL_INT_MASK9 (0x00000200)
-+#define MCF_INTC_IMRL_INT_MASK10 (0x00000400)
-+#define MCF_INTC_IMRL_INT_MASK11 (0x00000800)
-+#define MCF_INTC_IMRL_INT_MASK12 (0x00001000)
-+#define MCF_INTC_IMRL_INT_MASK13 (0x00002000)
-+#define MCF_INTC_IMRL_INT_MASK14 (0x00004000)
-+#define MCF_INTC_IMRL_INT_MASK15 (0x00008000)
-+#define MCF_INTC_IMRL_INT_MASK16 (0x00010000)
-+#define MCF_INTC_IMRL_INT_MASK17 (0x00020000)
-+#define MCF_INTC_IMRL_INT_MASK18 (0x00040000)
-+#define MCF_INTC_IMRL_INT_MASK19 (0x00080000)
-+#define MCF_INTC_IMRL_INT_MASK20 (0x00100000)
-+#define MCF_INTC_IMRL_INT_MASK21 (0x00200000)
-+#define MCF_INTC_IMRL_INT_MASK22 (0x00400000)
-+#define MCF_INTC_IMRL_INT_MASK23 (0x00800000)
-+#define MCF_INTC_IMRL_INT_MASK24 (0x01000000)
-+#define MCF_INTC_IMRL_INT_MASK25 (0x02000000)
-+#define MCF_INTC_IMRL_INT_MASK26 (0x04000000)
-+#define MCF_INTC_IMRL_INT_MASK27 (0x08000000)
-+#define MCF_INTC_IMRL_INT_MASK28 (0x10000000)
-+#define MCF_INTC_IMRL_INT_MASK29 (0x20000000)
-+#define MCF_INTC_IMRL_INT_MASK30 (0x40000000)
-+#define MCF_INTC_IMRL_INT_MASK31 (0x80000000)
-+
-+/* Bit definitions and macros for INTFRCH */
-+#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001)
-+#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002)
-+#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004)
-+#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008)
-+#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010)
-+#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020)
-+#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040)
-+#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080)
-+#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100)
-+#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200)
-+#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400)
-+#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800)
-+#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000)
-+#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000)
-+#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000)
-+#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000)
-+#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000)
-+#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000)
-+#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000)
-+#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000)
-+#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000)
-+#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000)
-+#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000)
-+#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000)
-+#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000)
-+#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000)
-+#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000)
-+#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000)
-+#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000)
-+#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000)
-+#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000)
-+#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000)
-+
-+/* Bit definitions and macros for INTFRCL */
-+#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001)
-+#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002)
-+#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004)
-+#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008)
-+#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010)
-+#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020)
-+#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040)
-+#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080)
-+#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100)
-+#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200)
-+#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400)
-+#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800)
-+#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000)
-+#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000)
-+#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000)
-+#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000)
-+#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000)
-+#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000)
-+#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000)
-+#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000)
-+#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000)
-+#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000)
-+#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000)
-+#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000)
-+#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000)
-+#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000)
-+#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000)
-+#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000)
-+#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000)
-+#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000)
-+#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000)
-+#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000)
-+
-+/* Bit definitions and macros for ICONFIG */
-+#define MCF_INTC_ICONFIG_EMASK (0x0020)
-+#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200)
-+#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400)
-+#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800)
-+#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000)
-+#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000)
-+#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000)
-+#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000)
-+
-+/* Bit definitions and macros for SIMR */
-+#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F))
-+
-+/* Bit definitions and macros for CIMR */
-+#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F))
-+
-+/* Bit definitions and macros for CLMASK */
-+#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F))
-+
-+/* Bit definitions and macros for SLMASK */
-+#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F))
-+
-+/* Bit definitions and macros for ICR group */
-+#define MCF_INTC_ICR_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR1 */
-+#define MCF_INTC_ICR1_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR2 */
-+#define MCF_INTC_ICR2_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR3 */
-+#define MCF_INTC_ICR3_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR4 */
-+#define MCF_INTC_ICR4_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR5 */
-+#define MCF_INTC_ICR5_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR6 */
-+#define MCF_INTC_ICR6_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR7 */
-+#define MCF_INTC_ICR7_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR8 */
-+#define MCF_INTC_ICR8_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR9 */
-+#define MCF_INTC_ICR9_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR10 */
-+#define MCF_INTC_ICR10_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR11 */
-+#define MCF_INTC_ICR11_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR12 */
-+#define MCF_INTC_ICR12_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR13 */
-+#define MCF_INTC_ICR13_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR14 */
-+#define MCF_INTC_ICR14_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR15 */
-+#define MCF_INTC_ICR15_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR16 */
-+#define MCF_INTC_ICR16_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR17 */
-+#define MCF_INTC_ICR17_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR18 */
-+#define MCF_INTC_ICR18_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR19 */
-+#define MCF_INTC_ICR19_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR20 */
-+#define MCF_INTC_ICR20_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR21 */
-+#define MCF_INTC_ICR21_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR22 */
-+#define MCF_INTC_ICR22_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR23 */
-+#define MCF_INTC_ICR23_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR24 */
-+#define MCF_INTC_ICR24_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR25 */
-+#define MCF_INTC_ICR25_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR26 */
-+#define MCF_INTC_ICR26_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR27 */
-+#define MCF_INTC_ICR27_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR28 */
-+#define MCF_INTC_ICR28_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR29 */
-+#define MCF_INTC_ICR29_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR30 */
-+#define MCF_INTC_ICR30_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR31 */
-+#define MCF_INTC_ICR31_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR32 */
-+#define MCF_INTC_ICR32_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR33 */
-+#define MCF_INTC_ICR33_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR34 */
-+#define MCF_INTC_ICR34_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR35 */
-+#define MCF_INTC_ICR35_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR36 */
-+#define MCF_INTC_ICR36_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR37 */
-+#define MCF_INTC_ICR37_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR38 */
-+#define MCF_INTC_ICR38_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR39 */
-+#define MCF_INTC_ICR39_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR40 */
-+#define MCF_INTC_ICR40_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR41 */
-+#define MCF_INTC_ICR41_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR42 */
-+#define MCF_INTC_ICR42_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR43 */
-+#define MCF_INTC_ICR43_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR44 */
-+#define MCF_INTC_ICR44_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR45 */
-+#define MCF_INTC_ICR45_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR46 */
-+#define MCF_INTC_ICR46_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR47 */
-+#define MCF_INTC_ICR47_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR48 */
-+#define MCF_INTC_ICR48_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR49 */
-+#define MCF_INTC_ICR49_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR50 */
-+#define MCF_INTC_ICR50_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR51 */
-+#define MCF_INTC_ICR51_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR52 */
-+#define MCF_INTC_ICR52_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR53 */
-+#define MCF_INTC_ICR53_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR54 */
-+#define MCF_INTC_ICR54_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR55 */
-+#define MCF_INTC_ICR55_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR56 */
-+#define MCF_INTC_ICR56_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR57 */
-+#define MCF_INTC_ICR57_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR58 */
-+#define MCF_INTC_ICR58_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR59 */
-+#define MCF_INTC_ICR59_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR60 */
-+#define MCF_INTC_ICR60_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR61 */
-+#define MCF_INTC_ICR61_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR62 */
-+#define MCF_INTC_ICR62_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR63 */
-+#define MCF_INTC_ICR63_IL(x) (((x)&0x07))
-+
-+/* Bit definitions and macros for SWIACK */
-+#define MCF_INTC_SWIACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for LIACK group */
-+#define MCF_INTC_LIACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L1IACK */
-+#define MCF_INTC_L1IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L2IACK */
-+#define MCF_INTC_L2IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L3IACK */
-+#define MCF_INTC_L3IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L4IACK */
-+#define MCF_INTC_L4IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L5IACK */
-+#define MCF_INTC_L5IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L6IACK */
-+#define MCF_INTC_L6IACK_VECTOR(x) (x)
-+
-+/* Bit definitions and macros for L7IACK */
-+#define MCF_INTC_L7IACK_VECTOR(x) (x)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5441X_INTC_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_pm.h
-@@ -0,0 +1,33 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_PM_H__
-+#define __MCF5441X_PM_H__
-+
-+/*********************************************************************
-+*
-+* Power Management Module Register Definition
-+*
-+*********************************************************************/
-+
-+#define MCF_PM_WCR MCF_REG08(0xFC040013)
-+#define MCF_PM_PPMSR0 MCF_REG08(0xFC04002C)
-+#define MCF_PM_PPMCR0 MCF_REG08(0xFC04002D)
-+#define MCF_PM_PPMSR1 MCF_REG08(0xFC04002E)
-+#define MCF_PM_PPMCR1 MCF_REG08(0xFC04002F)
-+#define MCF_PM_PPMHR0 MCF_REG32(0xFC040030)
-+#define MCF_PM_PPMLR0 MCF_REG32(0xFC040034)
-+#define MCF_PM_PPMHR1 MCF_REG32(0xFC040038)
-+#define MCF_PM_PPMLR1 MCF_REG32(0xFC04003C)
-+#define MCF_PM_LPCR MCF_REG08(0xEC090007)
-+#define MCF_PM_MISCCR MCF_REG16(0xEC09000E)
-+#define MCF_PM_CDHR MCF_REG16(0xEC090010)
-+#define MCF_PM_CDLR MCF_REG16(0xEC090012)
-+
-+#endif
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_rtc.h
-@@ -0,0 +1,127 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Lanttor.Guo@freescale.com
-+ *
-+ * Description:
-+ * This file is the register definition of m5441x RTC module
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#ifndef __MCF5441X_RTC_H__
-+#define __MCF5441X_RTC_H__
-+
-+/*********************************************************************
-+*
-+* Real-time Clock (RTC)
-+*
-+*********************************************************************/
-+#ifndef MCFINT_VECBASE
-+#define MCFINT_VECBASE 64
-+#endif
-+
-+#define MCFSIM_ICR_RTC (0xFC050040 + 26)
-+
-+/* Register read/write macros */
-+#define MCF_RTC_YEARMON 0xFC0A8000
-+#define MCF_RTC_DAYS 0xFC0A8002
-+#define MCF_RTC_HOURMIN 0xFC0A8004
-+#define MCF_RTC_SECONDS 0xFC0A8006
-+#define MCF_RTC_ALRM_YRMON 0xFC0A8008
-+#define MCF_RTC_ALRM_DAYS 0xFC0A800A
-+#define MCF_RTC_ALRM_HM 0xFC0A800C
-+#define MCF_RTC_ALRM_SEC 0xFC0A800E
-+#define MCF_RTC_CR 0xFC0A8010
-+#define MCF_RTC_SR 0xFC0A8012
-+#define MCF_RTC_ISR 0xFC0A8014
-+#define MCF_RTC_IER 0xFC0A8016
-+#define MCF_RTC_COUNT_DN 0xFC0A8018
-+#define MCF_RTC_CFG_DATA 0xFC0A8020
-+#define MCF_RTC_DST_HOUR 0xFC0A8022
-+#define MCF_RTC_DST_MON 0xFC0A8024
-+#define MCF_RTC_DST_DAY 0xFC0A8026
-+#define MCF_RTC_COMPEN 0xFC0A8028
-+#define MCF_RTC_UP_CNTRH 0xFC0A8032
-+#define MCF_RTC_UP_CNTRL 0xFC0A8034
-+
-+#define MCF_RTC_STANDBY_RAM_START 0xFC0A8040
-+#define MCF_RTC_STANDBY_RAM_END 0xFC0A8040
-+
-+/* Bit definitions and macros for MCF_RTC_YEARMON */
-+
-+#define MCF_RTC_YEARMON_YEAR_RD(x) (((x) & 0xFF00) >> 8)
-+#define MCF_RTC_YEARMON_MON_RD(x) ((x) & 0x00FF)
-+#define MCF_RTC_YEARMON_YEAR_SET(x) (((x) & 0x00FF) << 8)
-+#define MCF_RTC_YEARMON_MON_SET(x) ((x) & 0x000F)
-+
-+/* Bit definitions and macros for MCF_RTC_DAYS */
-+#define MCF_RTC_DAYS_DAYWEEK_RD(x) (((x) & 0xFF00) >> 8)
-+#define MCF_RTC_DAYS_DAY_RD(x) ((x) & 0x00FF)
-+#define MCF_RTC_DAYS_DAYWEEK_SET(x) (((x) & 0x0007) << 8)
-+#define MCF_RTC_DAYS_DAY_SET(x) ((x) & 0x001F)
-+
-+/* Bit definitions and macros for MCF_RTC_HOURMIN */
-+#define MCF_RTC_HOURMIN_HOURS_RD(x) (((x) & 0xFF00) >> 8)
-+#define MCF_RTC_HOURMIN_MINUTES_RD(x) ((x) & 0x00FF)
-+#define MCF_RTC_HOURMIN_HOURS_SET(x) (((x) & 0x001F) << 8)
-+#define MCF_RTC_HOURMIN_MINUTES_SET(x) ((x) & 0x003F)
-+
-+/* Bit definitions and macros for MCF_RTC_SECONDS */
-+#define MCF_RTC_SECONDS_SECONDS_RD(x) ((x) & 0x00FF)
-+#define MCF_RTC_SECONDS_SECONDS_SET(x) (((x) & 0x003F) << 0)
-+
-+/* Bit definitions and macros for MCF_RTC_CR */
-+#define MCF_RTC_CR_WP 0x0002
-+
-+/* Bit definitions and macros for MCF_RTC_ISR */
-+#define MCF_RTC_ISR_STW 0x0002
-+#define MCF_RTC_ISR_ALM 0x0004
-+#define MCF_RTC_ISR_DAY 0x0008
-+#define MCF_RTC_ISR_HR 0x0010
-+#define MCF_RTC_ISR_MIN 0x0020
-+#define MCF_RTC_ISR_1HZ 0x0040
-+#define MCF_RTC_ISR_2HZ 0x0080
-+#define MCF_RTC_ISR_SAM0 0x0100
-+#define MCF_RTC_ISR_SAM1 0x0200
-+#define MCF_RTC_ISR_SAM2 0x0400
-+#define MCF_RTC_ISR_SAM3 0x0800
-+#define MCF_RTC_ISR_SAM4 0x1000
-+#define MCF_RTC_ISR_SAM5 0x2000
-+#define MCF_RTC_ISR_SAM6 0x4000
-+#define MCF_RTC_ISR_SAM7 0x8000
-+
-+/* Bit definitions and macros for MCF_RTC_IER */
-+#define MCF_RTC_IER_STW 0x0002
-+#define MCF_RTC_IER_ALM 0x0004
-+#define MCF_RTC_IER_DAY 0x0008
-+#define MCF_RTC_IER_HR 0x0010
-+#define MCF_RTC_IER_MIN 0x0020
-+#define MCF_RTC_IER_1HZ 0x0040
-+#define MCF_RTC_IER_2HZ 0x0080
-+#define MCF_RTC_IER_SAM0 0x0100
-+#define MCF_RTC_IER_SAM1 0x0200
-+#define MCF_RTC_IER_SAM2 0x0400
-+#define MCF_RTC_IER_SAM3 0x0800
-+#define MCF_RTC_IER_SAM4 0x1000
-+#define MCF_RTC_IER_SAM5 0x2000
-+#define MCF_RTC_IER_SAM6 0x4000
-+#define MCF_RTC_IER_SAM7 0x8000
-+
-+/* Bit definitions and macros for MCF_RTC_CFG_DATA */
-+#define MCF_RTC_CFG_DATA_OSCBYP 0x0010
-+#define MCF_RTC_CFG_DATA_OSCEN 0x0008
-+
-+/* Bit definitions and macros for MCF_RTC_SR */
-+#define MCF_RTC_SR_INVALID 0x0001
-+#define MCF_RTC_SR_WPE 0x0010
-+
-+/* Interrupt source */
-+#define MCFINT_RTC (64+64+26)
-+/*********************************************************************/
-+
-+#endif
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_scm.h
-@@ -0,0 +1,33 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+#ifndef __MCF5441X_SCM_H__
-+#define __MCF5441X_SCM_H__
-+
-+/*********************************************************************
-+*
-+* System Control Module (SCM)
-+*
-+*********************************************************************/
-+
-+/* Core Watchdog(CW) Register read/write macros */
-+#define MCF_SCM_CWCR MCF_REG16(0xFC040016) /* CW Control Register */
-+#define MCF_SCM_CWSR MCF_REG08(0xFC04001B) /* CW Service Register */
-+
-+/* CW Bit definitions and macros for SWCR */
-+#define MCF_SCM_CWCR_RO (0x8000) /* CWCR is read-only */
-+#define MCF_SCM_CWCR_CWRWR (0x0100) /* CW run when halted */
-+#define MCF_SCM_CWCR_CWE (0x0080) /* CW timer enable */
-+#define MCF_SCM_CWCR_CWRI(x) (((x) & 0x03) << 5) /* CW reset/interrupt */
-+#define MCF_SCM_CWCR_CWT(x) (((x) & 0x1F) << 0) /* CW time-out period */
-+
-+#define MCF_GPT_MAX_TIMEOUT 17
-+/********************************************************************/
-+
-+#endif /* __MCF5441X_SCM_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_sdramc.h
-@@ -0,0 +1,141 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_SDRAMC_H__
-+#define __MCF5441X_SDRAMC_H__
-+
-+/*********************************************************************
-+*
-+* SDRAM Controller (SDRAMC)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+/* SDRAM Mode/Extended Mode Register */
-+#define MCF_SDRAMC_SDMR (*(vuint32 *)(0xFC0B8000))
-+/* SDRAM Control Register */
-+#define MCF_SDRAMC_SDCR (*(vuint32 *)(0xFC0B8004))
-+/* SDRAM Configuration Register 1 */
-+#define MCF_SDRAMC_SDCFG1 (*(vuint32 *)(0xFC0B8008))
-+/* SDRAM Configuration Register 2 */
-+#define MCF_SDRAMC_SDCFG2 (*(vuint32 *)(0xFC0B800C))
-+/* SDRAM Chip Select Register */
-+#define MCF_SDRAMC_SDCS0 (*(vuint32 *)(0xFC0B8110))
-+/* SDRAM Chip Select Register */
-+#define MCF_SDRAMC_SDCS1 (*(vuint32 *)(0xFC0B8114))
-+
-+/* Parameterized register read/write macros for multiple registers */
-+/* SDRAM Chip Select Register */
-+#define MCF_SDRAMC_SDCS(x) (*(vuint32 *)(0xFC0B8110+((x)*0x004)))
-+
-+/* Bit definitions and macros for SDMR */
-+#define MCF_SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */
-+#define MCF_SDRAMC_SDMR_CMD (0x00010000) /* Command */
-+#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */
-+#define MCF_SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */
-+#define MCF_SDRAMC_SDMR_BK_LMR (0x00000000)
-+#define MCF_SDRAMC_SDMR_BK_LEMR (0x40000000)
-+
-+/* Bit definitions and macros for SDCR */
-+#define MCF_SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */
-+#define MCF_SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */
-+#define MCF_SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */
-+#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */
-+#define MCF_SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */
-+/* Periodic Refresh Counter */
-+#define MCF_SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16)
-+#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */
-+/* Internal Address Mux Select */
-+#define MCF_SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24)
-+#define MCF_SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */
-+#define MCF_SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */
-+#define MCF_SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */
-+/* Clock Enable */
-+#define MCF_SDRAMC_SDCR_CKE (0x40000000)
-+/* SDRAM Mode Register Programming Enable */
-+#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000)
-+#define MCF_SDRAMC_SDCR_DQS_OE_BOTH (0x00000C00)
-+
-+/* Bit definitions and macros for SDCFG1 */
-+/* Write Latency */
-+#define MCF_SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4)
-+/* Refresh to active delay */
-+#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8)
-+/* Precharge to active delay */
-+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12)
-+/* Active to read/write delay */
-+#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16)
-+/* Read CAS Latency */
-+#define MCF_SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20)
-+/* Single write to read/write/precharge delay */
-+#define MCF_SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24)
-+/* Single read to read/write/precharge delay */
-+#define MCF_SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28)
-+
-+/* Bit definitions and macros for SDCFG2 */
-+/* Burst Length */
-+#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16)
-+/* Burst read to write delay */
-+#define MCF_SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20)
-+/* Burst write to read/write/precharge delay */
-+#define MCF_SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24)
-+/* Burst read to read/precharge delay */
-+#define MCF_SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28)
-+
-+/* Bit definitions and macros for SDCS group */
-+/* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F))
-+/* Chip-Select Base Address */
-+#define MCF_SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20)
-+#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000)
-+#define MCF_SDRAMC_SDCS_CSSZ_DISABLE (0x00000000)
-+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013)
-+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014)
-+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015)
-+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016)
-+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017)
-+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018)
-+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019)
-+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A)
-+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B)
-+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C)
-+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D)
-+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E)
-+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
-+
-+/* Bit definitions and macros for SDCS0 */
-+/* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS0_CSSZ(x) (((x)&0x0000001F))
-+/* Chip-Select Base Address */
-+#define MCF_SDRAMC_SDCS0_CSBA(x) (((x)&0x00000FFF)<<20)
-+#define MCF_SDRAMC_SDCS0_BA(x) ((x)&0xFFF00000)
-+#define MCF_SDRAMC_SDCS0_CSSZ_DISABLE (0x00000000)
-+#define MCF_SDRAMC_SDCS0_CSSZ_1MBYTE (0x00000013)
-+#define MCF_SDRAMC_SDCS0_CSSZ_2MBYTE (0x00000014)
-+#define MCF_SDRAMC_SDCS0_CSSZ_4MBYTE (0x00000015)
-+#define MCF_SDRAMC_SDCS0_CSSZ_8MBYTE (0x00000016)
-+#define MCF_SDRAMC_SDCS0_CSSZ_16MBYTE (0x00000017)
-+#define MCF_SDRAMC_SDCS0_CSSZ_32MBYTE (0x00000018)
-+#define MCF_SDRAMC_SDCS0_CSSZ_64MBYTE (0x00000019)
-+#define MCF_SDRAMC_SDCS0_CSSZ_128MBYTE (0x0000001A)
-+#define MCF_SDRAMC_SDCS0_CSSZ_256MBYTE (0x0000001B)
-+#define MCF_SDRAMC_SDCS0_CSSZ_512MBYTE (0x0000001C)
-+#define MCF_SDRAMC_SDCS0_CSSZ_1GBYTE (0x0000001D)
-+#define MCF_SDRAMC_SDCS0_CSSZ_2GBYTE (0x0000001E)
-+#define MCF_SDRAMC_SDCS0_CSSZ_4GBYTE (0x0000001F)
-+
-+/* Bit definitions and macros for SDCS1 */
-+/* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS1_CSSZ(x) (((x)&0x0000001F))
-+/* Chip-Select Base Address */
-+#define MCF_SDRAMC_SDCS1_CSBA(x) (((x)&0x00000FFF)<<20)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5441X_SDRAMC_H__ */
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf5441x_xbs.h
-@@ -0,0 +1,77 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5441X_XBS_H__
-+#define __MCF5441X_XBS_H__
-+
-+/*
-+ * Crossbar Switch (XBS)
-+ */
-+
-+/* Register read/write macros */
-+#define MCF_XBS_PRS0 MCF_REG32(0xFC004000) /* DRAM */
-+#define MCF_XBS_CRS0 MCF_REG32(0xFC004010)
-+#define MCF_XBS_PRS1 MCF_REG32(0xFC004100) /* Flexbus Priority */
-+#define MCF_XBS_CRS1 MCF_REG32(0xFC004110) /* Flexbus Control */
-+#define MCF_XBS_PRS2 MCF_REG32(0xFC004200) /* SDRam Priority */
-+#define MCF_XBS_CRS2 MCF_REG32(0xFC004210) /* SDRam Control */
-+#define MCF_XBS_PRS3 MCF_REG32(0xFC004300) /* ATA Priority */
-+#define MCF_XBS_CRS4 MCF_REG32(0xFC004410) /* SRAM Control */
-+#define MCF_XBS_PRS6 MCF_REG32(0xFC004600) /* Slave6 Priority */
-+#define MCF_XBS_CRS6 MCF_REG32(0xFC004610) /* Slave6 Control */
-+#define MCF_XBS_PRS7 MCF_REG32(0xFC004700) /* Other Priority */
-+#define MCF_XBS_CRS7 MCF_REG32(0xFC004710) /* Other Control */
-+
-+/* Priorities */
-+#define MCF_XBS_PRI_1 0 /* Level 1 (highest) */
-+#define MCF_XBS_PRI_2 1 /* Level 2 */
-+#define MCF_XBS_PRI_3 2 /* Level 3 */
-+#define MCF_XBS_PRI_4 3 /* Level 4 */
-+#define MCF_XBS_PRI_5 4 /* Level 5 */
-+#define MCF_XBS_PRI_6 5 /* Level 6 */
-+#define MCF_XBS_PRI_7 6 /* Level 7 (lowest) */
-+#define MCF_XBS_PRI_MASK 7 /* Mask (Not a valid level) */
-+
-+/* Priority Register (PRSn) Defs */
-+#define MCF_XBS_PRS_MACRO(m, p) ((p)<<((m)<<2))
-+#define MCF_XBS_PRS_M0(p) MCF_XBS_PRS_MACRO(0, p) /* Coldfire Core */
-+#define MCF_XBS_PRS_M1(p) MCF_XBS_PRS_MACRO(1, p) /* eDMA */
-+#define MCF_XBS_PRS_M2(p) MCF_XBS_PRS_MACRO(2, p) /* FEC0 */
-+#define MCF_XBS_PRS_M3(p) MCF_XBS_PRS_MACRO(3, p) /* FEC1 */
-+#define MCF_XBS_PRS_M4(p) MCF_XBS_PRS_MACRO(4, p) /* Master 4 */
-+#define MCF_XBS_PRS_M5(p) MCF_XBS_PRS_MACRO(5, p) /* PCI */
-+#define MCF_XBS_PRS_M6(p) MCF_XBS_PRS_MACRO(6, p) /* USB OTG */
-+#define MCF_XBS_PRS_M7(p) MCF_XBS_PRS_MACRO(7, p) /* Serial Boot */
-+
-+/* Control Register (CRSn) Defs */
-+#define MCF_XBS_CRS_RO 0x80000000 /* Read Only */
-+#define MCF_XBS_CRS_ARB 0x00000100 /* Arbitration Mode */
-+#define MCF_XBS_CRS_PCTL 0x00000030 /* Parking Control */
-+#define MCF_XBS_CRS_PARK 0x00000007 /* Park Location */
-+
-+/* MCF_XBS_CRS_ARB Defs */
-+#define MCF_ABS_CRS_ARB_FIXED 0x00000000 /* Fixed priority */
-+#define MCF_ABS_CRS_ARB_ROUND 0x00000100 /* Round Robin priority */
-+
-+/* MCF_XBS_CRS_PCTL Defs */
-+#define MCF_ABS_CRS_PCTL_PARK 0x00000000 /* Park on the defined PARK */
-+#define MCF_ABS_CRS_PCTL_LAST 0x00000010 /* Park on the last master */
-+#define MCF_ABS_CRS_PCTL_NONE 0x00000020 /* Don't park */
-+
-+/* MCF_XBS_CRS_PARK Defs */
-+#define MCF_ABS_CRS_PARK_M0 0x00000000 /* Park on Coldfire Core */
-+#define MCF_ABS_CRS_PARK_M1 0x00000001 /* Park on eDMA */
-+#define MCF_ABS_CRS_PARK_M2 0x00000002 /* Park on FEC0 */
-+#define MCF_ABS_CRS_PARK_M3 0x00000003 /* Park on FEC1 */
-+#define MCF_ABS_CRS_PARK_M4 0x00000004 /* Park on Reserved */
-+#define MCF_ABS_CRS_PARK_M5 0x00000005 /* Park on PCI */
-+#define MCF_ABS_CRS_PARK_M6 0x00000006 /* Park on USB OTG */
-+#define MCF_ABS_CRS_PARK_M7 0x00000007 /* Park on Serial Boot */
-+
-+#endif /* __MCF5441X_XBS_H__ */
diff --git a/target/linux/coldfire/patches/005-Add-serial-driver-and-irda-driver-support-for-MCF544.patch b/target/linux/coldfire/patches/005-Add-serial-driver-and-irda-driver-support-for-MCF544.patch
deleted file mode 100644
index 1ccbb12..0000000
--- a/target/linux/coldfire/patches/005-Add-serial-driver-and-irda-driver-support-for-MCF544.patch
+++ /dev/null
@@ -1,200 +0,0 @@
-From 5c37079957c5e5555aa8284a879f8cc44fa8eb25 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:39 +0800
-Subject: [PATCH 05/52] Add serial driver and irda driver support for MCF5445x and MCF547x/MCF548x
-
-Add common serial driver for MCF5445x and MCF547x/MCF548x.
-Also add irda support for MCF547x/MCF548x.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/tty/serial/Kconfig | 20 ++++++++++
- drivers/tty/serial/mcf.c | 87 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 107 insertions(+), 0 deletions(-)
-
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -1027,6 +1027,26 @@ config SERIAL_68328_RTS_CTS
- bool "Support RTS/CTS on 68328 serial port"
- depends on SERIAL_68328
-
-+config SERIAL_COLDFIRE_IRDA
-+ bool "ColdFire IRDA support"
-+ depends on SERIAL_MCF
-+ help
-+ This driver supports IrDA on the ColdFire platform,
-+ such as MCF547x and MCF548x.
-+
-+ Say Y here if you want to use IrDA 1.1 SIR mode.
-+
-+config SERIAL_COLDFIRE_EDMA
-+ bool "ColdFire serial EDMA support"
-+ depends on SERIAL_MCF
-+ default n
-+ help
-+ Enables Enhanced Direct Memory Access(eDMA) in the Coldfire
-+ serial driver.
-+
-+ Say Y here if you want to use DMA processing of transmit
-+ and receive data for the serial driver.
-+
- config SERIAL_MCF
- bool "Coldfire serial support"
- depends on COLDFIRE
---- a/drivers/tty/serial/mcf.c
-+++ b/drivers/tty/serial/mcf.c
-@@ -4,6 +4,10 @@
- * mcf.c -- Freescale ColdFire UART driver
- *
- * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Jason Jin Jason.Jin@freescale.com
-+ * Shrek Wu B16972@freescale.com
-+ * Chengju Cai b22600@freescale.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
-@@ -23,9 +27,11 @@
- #include <linux/serial.h>
- #include <linux/serial_core.h>
- #include <linux/io.h>
-+#include <linux/delay.h>
- #include <asm/coldfire.h>
- #include <asm/mcfsim.h>
- #include <asm/mcfuart.h>
-+#include <asm/m5485psc.h>
- #include <asm/nettel.h>
-
- /****************************************************************************/
-@@ -46,6 +52,10 @@
- #define mcf_setppdtr(p, v) do { } while (0)
- #endif
-
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+#define SERIAL_IRDA_LINE (2)
-+#endif
-+
- /****************************************************************************/
-
- /*
-@@ -101,6 +111,15 @@ static void mcf_start_tx(struct uart_por
- {
- struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
-
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+ if (port->line == SERIAL_IRDA_LINE) {
-+ /* Disable IRDA receiver*/
-+ writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
-+ writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
-+
-+ writeb(MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR);
-+ }
-+#endif
- pp->imr |= MCFUART_UIR_TXREADY;
- writeb(pp->imr, port->membase + MCFUART_UIMR);
- }
-@@ -154,6 +173,30 @@ static int mcf_startup(struct uart_port
-
- spin_lock_irqsave(&port->lock, flags);
-
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+ if (port->line == SERIAL_IRDA_LINE) {
-+ /* Put PSC in IrDA mode */
-+ MCF_PSC_SICR(port->line) = MCF_PSC_SICR_SIM_SIR;
-+
-+ /* Set pulse width to 1.6 uS */
-+ MCF_PSC_IRSDR(port->line) = (uint8_t)
-+ (16 * (CONFIG_MCFCLK / 10000000));
-+ MCF_PSC_IRCR1(port->line) = MCF_PSC_IRCR1_SPUL;
-+ MCF_PSC_IRCR2(port->line) = 0;
-+
-+ /* Enable RTS to send */
-+ MCF_PSC_OPSET(port->line) = MCF_PSC_OPSET_RTS;
-+
-+ /* Setup FIFO Alarms */
-+ MCF_PSC_RFAR(port->line) = MCF_PSC_RFAR_ALARM(248);
-+ MCF_PSC_TFAR(port->line) = MCF_PSC_TFAR_ALARM(248);
-+
-+ MCF_PSC_RFCR(port->line) = MCF_PSC_RFCR_FRMEN
-+ | MCF_PSC_RFCR_GR(4);
-+ MCF_PSC_TFCR(port->line) = MCF_PSC_TFCR_FRMEN
-+ | MCF_PSC_RFCR_GR(4);
-+ }
-+#endif
- /* Reset UART, get it into known state... */
- writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
- writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
-@@ -177,7 +220,17 @@ static void mcf_shutdown(struct uart_por
- {
- struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+ unsigned long delay_counter = 0;
-+#endif
-
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+ while (!((readb(port->membase + MCFUART_USR)) & MCFUART_USR_TXEMPTY)) {
-+ if (delay_counter++ > 25000)
-+ break;
-+ udelay(10);
-+ }
-+#endif
- spin_lock_irqsave(&port->lock, flags);
-
- /* Disable all interrupts now */
-@@ -202,7 +255,14 @@ static void mcf_set_termios(struct uart_
- unsigned int baudfr;
- #endif
- unsigned char mr1, mr2;
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+ int i = 0; /* hush GCC */
-+#endif
-
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+ while (i++ < 35000)
-+ udelay(1);
-+#endif
- baud = uart_get_baud_rate(port, termios, old, 0, 230400);
- #if defined(CONFIG_M5272)
- baudclk = (MCF_BUSCLK / baud) / 32;
-@@ -331,6 +391,23 @@ static void mcf_tx_chars(struct mcf_uart
- while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) {
- if (xmit->head == xmit->tail)
- break;
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+ if (port->line == SERIAL_IRDA_LINE) {
-+ while (!((readb(port->membase + MCFUART_USR))\
-+ & MCFUART_USR_TXEMPTY))
-+ ;
-+ /* delay for settle */
-+#if defined(CONFIG_M548X)
-+ udelay(1);
-+#elif defined(CONFIG_M547X)
-+ udelay(2);
-+#else
-+ int i = 0;
-+ while (i++ < 25000)
-+ udelay(1);
-+#endif
-+ }
-+#endif
- writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
- port->icount.tx++;
-@@ -340,6 +417,16 @@ static void mcf_tx_chars(struct mcf_uart
- uart_write_wakeup(port);
-
- if (xmit->head == xmit->tail) {
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+ if (port->line == SERIAL_IRDA_LINE) {
-+ /* Enable receiver for IRDA */
-+ writeb(MCFUART_UCR_CMDRESETRX,\
-+ port->membase + MCFUART_UCR);
-+ /* reset RX */
-+ writeb(MCFUART_UCR_TXENABLE | MCFUART_UCR_RXENABLE,\
-+ port->membase + MCFUART_UCR);
-+ }
-+#endif
- pp->imr &= ~MCFUART_UIR_TXREADY;
- writeb(pp->imr, port->membase + MCFUART_UIMR);
- }
diff --git a/target/linux/coldfire/patches/006-Add-FEC-driver-support-for-MCF5445x-MCF5441x-MCF547x.patch b/target/linux/coldfire/patches/006-Add-FEC-driver-support-for-MCF5445x-MCF5441x-MCF547x.patch
deleted file mode 100644
index aa13146..0000000
--- a/target/linux/coldfire/patches/006-Add-FEC-driver-support-for-MCF5445x-MCF5441x-MCF547x.patch
+++ /dev/null
@@ -1,2759 +0,0 @@
-From 9be336132025e7670790cdc9c24a81c23e893484 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:40 +0800
-Subject: [PATCH 06/52] Add FEC driver support for MCF5445x/MCF5441x/MCF547x/MCF548x
-
-Add FEC driver support for MCF5445x/MCF5441x/MCF547x/MCF548x.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5441x/fec.c | 172 +++++
- arch/m68k/coldfire/m5445x/fec.c | 143 ++++
- drivers/net/Kconfig | 33 +-
- drivers/net/Makefile | 1 +
- drivers/net/fec.c | 27 +-
- drivers/net/fec.h | 7 +-
- drivers/net/fec_m547x.c | 1551 +++++++++++++++++++++++++++++++++++++++
- drivers/net/fec_m547x.h | 241 ++++++
- drivers/net/phy/Kconfig | 15 +
- drivers/net/phy/Makefile | 3 +
- drivers/net/phy/broadcom522x.c | 170 +++++
- drivers/net/phy/national836x.c | 104 +++
- drivers/net/phy/national8384x.c | 110 +++
- 13 files changed, 2566 insertions(+), 11 deletions(-)
- create mode 100644 arch/m68k/coldfire/m5441x/fec.c
- create mode 100644 arch/m68k/coldfire/m5445x/fec.c
- create mode 100644 drivers/net/fec_m547x.c
- create mode 100644 drivers/net/fec_m547x.h
- create mode 100644 drivers/net/phy/broadcom522x.c
- create mode 100644 drivers/net/phy/national836x.c
- create mode 100644 drivers/net/phy/national8384x.c
-
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/fec.c
-@@ -0,0 +1,172 @@
-+/*
-+ * fec.c on m5441x platform
-+ *
-+ * Sub-architcture dependant initialization code for the Freescale
-+ * 5441X FEC module.
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * ShrekWu B16972@freescale.com
-+ * Alison Wang b18965@freescale.com
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/param.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/device.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/platform_device.h>
-+#include <linux/fec.h>
-+#include <linux/io.h>
-+
-+#include <asm/pgtable.h>
-+#include <asm/traps.h>
-+#include <asm/machdep.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcf5441x_dtim.h>
-+
-+static struct resource fec0_resources[] = {
-+ [0] = {
-+ .start = MCF_MBAR + 0xfc0d4000,
-+ .end = MCF_MBAR + 0xfc0d42ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = (64 + 36),
-+ .end = (64 + 36),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = (64 + 40),
-+ .end = (64 + 40),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = (64 + 42),
-+ .end = (64 + 42),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+#if defined(CONFIG_FEC2)
-+static struct resource fec1_resources[] = {
-+ [0] = {
-+ .start = MCF_MBAR + 0xfc0d8000,
-+ .end = MCF_MBAR + 0xfc0d82ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = (64 + 13 + 36),
-+ .end = (64 + 13 + 36),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = (64 + 13 + 40),
-+ .end = (64 + 13 + 40),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = (64 + 13 + 42),
-+ .end = (64 + 13 + 42),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+#endif
-+
-+static struct fec_platform_data m54418_fec_pdata = {
-+ .phy = PHY_INTERFACE_MODE_RMII,
-+};
-+
-+static struct platform_device fec0_coldfire_device = {
-+ .name = "m54418-fec",
-+ .id = 0,
-+ .resource = fec0_resources,
-+ .num_resources = ARRAY_SIZE(fec0_resources),
-+ .dev = {
-+ .platform_data = &m54418_fec_pdata,
-+ }
-+};
-+
-+#if defined(CONFIG_FEC2)
-+static struct platform_device fec1_coldfire_device = {
-+ .name = "m54418-fec",
-+ .id = 1,
-+ .resource = fec1_resources,
-+ .num_resources = ARRAY_SIZE(fec1_resources),
-+ .dev = {
-+ .platform_data = &m54418_fec_pdata,
-+ }
-+};
-+#endif
-+
-+static struct platform_device *fec_device[] = {
-+ &fec0_coldfire_device,
-+#if defined(CONFIG_FEC2)
-+ &fec1_coldfire_device,
-+#endif
-+};
-+
-+static int __init mcf5441x_fec_dev_init(void)
-+{
-+ int retval = 0;
-+
-+ MCF_GPIO_PAR_FEC =
-+ (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC_RMII0FUL_ULPI;
-+
-+ MCF_GPIO_SRCR_FEC = 0x0C;
-+
-+#if defined(CONFIG_FEC2)
-+ MCF_GPIO_PAR_FEC =
-+ (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC_RMII0FUL_1FUL;
-+
-+ MCF_GPIO_SRCR_FEC |= 0x03;
-+
-+ MCF_GPIO_PAR_SIMP0H =
-+ (MCF_GPIO_PAR_SIMP0H &
-+ MCF_GPIO_PAR_SIMP0H_DAT_MASK) |
-+ MCF_GPIO_PAR_SIMP0H_DAT_GPIO;
-+
-+ MCF_GPIO_PDDR_G =
-+ (MCF_GPIO_PDDR_G &
-+ MCF_GPIO_PDDR_G4_MASK) |
-+ MCF_GPIO_PDDR_G4_OUTPUT;
-+
-+ MCF_GPIO_PODR_G =
-+ (MCF_GPIO_PODR_G &
-+ MCF_GPIO_PODR_G4_MASK);
-+#endif
-+
-+ retval = platform_add_devices(fec_device, ARRAY_SIZE(fec_device));
-+ if (retval < 0) {
-+ printk(KERN_ERR "MCF5441x FEC: platform_device_register failed"
-+ "with code=%d\n", retval);
-+ }
-+
-+ return retval;
-+}
-+
-+arch_initcall(mcf5441x_fec_dev_init);
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/fec.c
-@@ -0,0 +1,143 @@
-+/*
-+ * fec-mcf5445x.c
-+ *
-+ * Sub-architcture dependant initialization code for the Freescale
-+ * 5445X FEC module.
-+ *
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/param.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <asm/pgtable.h>
-+
-+#include <asm/traps.h>
-+#include <asm/machdep.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+
-+static struct resource fec0_resources[] = {
-+ [0] = {
-+ .start = MCF_MBAR + 0xfc030000,
-+ .end = MCF_MBAR + 0xfc0302ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = (64 + 36),
-+ .end = (64 + 36),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = (64 + 40),
-+ .end = (64 + 40),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = (64 + 42),
-+ .end = (64 + 42),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+#if defined(CONFIG_FEC2)
-+static struct resource fec1_resources[] = {
-+ [0] = {
-+ .start = MCF_MBAR + 0xfc034000,
-+ .end = MCF_MBAR + 0xfc0342ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = (64 + 13 + 36),
-+ .end = (64 + 13 + 36),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = (64 + 13 + 40),
-+ .end = (64 + 13 + 40),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = (64 + 13 + 42),
-+ .end = (64 + 13 + 42),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+#endif
-+
-+static struct platform_device fec0_coldfire_device = {
-+ .name = "fec",
-+ .id = 0,
-+ .resource = fec0_resources,
-+ .num_resources = ARRAY_SIZE(fec0_resources),
-+};
-+
-+#if defined(CONFIG_FEC2)
-+static struct platform_device fec1_coldfire_device = {
-+ .name = "fec",
-+ .id = 1,
-+ .resource = fec1_resources,
-+ .num_resources = ARRAY_SIZE(fec1_resources),
-+};
-+#endif
-+
-+static struct platform_device *fec_device[] = {
-+ &fec0_coldfire_device,
-+#if defined(CONFIG_FEC2)
-+ &fec1_coldfire_device,
-+#endif
-+};
-+
-+static int __init mcf5445x_fec_dev_init(void)
-+{
-+ int retval = 0;
-+
-+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC0_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO;
-+
-+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC1_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO;
-+
-+ MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 |
-+ MCF_GPIO_PAR_FECI2C_MDC0_MDC0);
-+
-+ MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_MDIO1_MDIO1 |
-+ MCF_GPIO_PAR_FECI2C_MDC1_MDC1);
-+
-+ retval = platform_add_devices(fec_device, ARRAY_SIZE(fec_device));
-+ if (retval < 0) {
-+ printk(KERN_ERR "MCF5445x FEC: platform_device_register failed"
-+ "with code=%d\n",
-+ retval);
-+ }
-+
-+ return retval;
-+}
-+
-+arch_initcall(mcf5445x_fec_dev_init);
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -1943,13 +1943,44 @@ config 68360_ENET
-
- config FEC
- bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
-- depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
-+ depends on M523x || M527x || M5272 || M528x || M520x || M532x || M5445X || M5441X || \
- MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28
- select PHYLIB
- help
- Say Y here if you want to use the built-in 10/100 Fast ethernet
- controller on some Motorola ColdFire and Freescale i.MX processors.
-
-+
-+config FEC2
-+ bool "Second FEC ethernet controller (on some ColdFire CPUs)"
-+ depends on FEC && (M54455 || M5441X)
-+ help
-+ Say Y here if you want to use the second built-in 10/100 Fast
-+ ethernet controller on some Motorola ColdFire processors.
-+
-+config FEC_548x
-+ tristate "MCF547x/MCF548x Fast Ethernet Controller support"
-+ depends on M547X_8X
-+ help
-+ The MCF547x and MCF548x have a built-in Fast Ethernet Controller.
-+ Saying Y here will include support for this device in the kernel.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called fecm.
-+
-+config FEC_548x_ENABLE_FEC2
-+ bool "Enable the second FEC"
-+ depends on FEC_548x
-+ help
-+ This enables the second FEC on the 547x/548x. If you want to use
-+ it, say Y.
-+
-+config FEC_548x_SHARED_PHY
-+ bool "Shared PHY interface(on some ColdFire designs)"
-+ depends on FEC_548x_ENABLE_FEC2
-+ help
-+ Say Y here if both PHYs are controlled via a single channel.
-+
- config FEC_MPC52xx
- tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -123,6 +123,7 @@ obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
- obj-$(CONFIG_HP100) += hp100.o
- obj-$(CONFIG_SMC9194) += smc9194.o
- obj-$(CONFIG_FEC) += fec.o
-+obj-$(CONFIG_FEC_548x) += fec_m547x.o
- obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
- ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
- obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
---- a/drivers/net/fec.c
-+++ b/drivers/net/fec.c
-@@ -18,7 +18,7 @@
- * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
- * Copyright (c) 2004-2006 Macq Electronique SA.
- *
-- * Copyright (C) 2010 Freescale Semiconductor, Inc.
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
- #include <linux/module.h>
-@@ -74,6 +74,9 @@ static struct platform_device_id fec_dev
- }, {
- .name = "imx28-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
-+ }, {
-+ .name = "m54418-fec",
-+ .driver_data = FEC_QUIRK_ENET_MAC,
- },
- { }
- };
-@@ -148,8 +151,9 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet
- * account when setting it.
- */
- #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-- defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
-- defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
-+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
-+ defined(CONFIG_M5445X) || defined(CONFIG_M5441X) || \
-+ defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
- #define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
- #else
- #define OPT_FRAME_SIZE 0
-@@ -400,7 +404,8 @@ fec_enet_tx(struct net_device *dev)
- if (bdp == fep->cur_tx && fep->tx_full == 0)
- break;
-
-- dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
-+/* dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, \
-+ FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);*/
- bdp->cbd_bufaddr = 0;
-
- skb = fep->tx_skbuff[fep->skb_dirty];
-@@ -527,8 +532,8 @@ fec_enet_rx(struct net_device *dev)
- dev->stats.rx_bytes += pkt_len;
- data = (__u8*)__va(bdp->cbd_bufaddr);
-
-- dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen,
-- DMA_FROM_DEVICE);
-+/* dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen,
-+ DMA_FROM_DEVICE);*/
-
- if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
- swap_buffer(data, pkt_len);
-@@ -552,8 +557,8 @@ fec_enet_rx(struct net_device *dev)
- netif_rx(skb);
- }
-
-- bdp->cbd_bufaddr = dma_map_single(NULL, data, bdp->cbd_datlen,
-- DMA_FROM_DEVICE);
-+/* bdp->cbd_bufaddr = dma_map_single(NULL, data, bdp->cbd_datlen,
-+ DMA_FROM_DEVICE);*/
- rx_processing_done:
- /* Clear the status flags for this buffer */
- status &= ~BD_ENET_RX_STATS;
-@@ -632,6 +637,8 @@ static void __inline__ fec_get_mac(struc
- static void fec_enet_adjust_link(struct net_device *dev)
- {
- struct fec_enet_private *fep = netdev_priv(dev);
-+ const struct platform_device_id *id_entry =
-+ platform_get_device_id(fep->pdev);
- struct phy_device *phy_dev = fep->phy_dev;
- unsigned long flags;
-
-@@ -660,6 +667,10 @@ static void fec_enet_adjust_link(struct
- fec_restart(dev, phy_dev->duplex);
- else
- fec_stop(dev);
-+
-+ if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
-+ writel(2, fep->hwp + FEC_ECNTRL);
-+
- status_change = 1;
- }
-
---- a/drivers/net/fec.h
-+++ b/drivers/net/fec.h
-@@ -4,6 +4,7 @@
- * fec.h -- Fast Ethernet Controller for Motorola ColdFire SoC
- * processors.
- *
-+ * Copyright (C) 2011 Freescale Semiconductor,Inc. All Rights Reserved.
- * (C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000-2001, Lineo (www.lineo.com)
- */
-@@ -14,8 +15,10 @@
- /****************************************************************************/
-
- #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-- defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
-- defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
-+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
-+ defined(CONFIG_M537x) || defined(CONFIG_M5301x) || \
-+ defined(CONFIG_M5445X) || defined(CONFIG_M5441X) || \
-+ defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
- /*
- * Just figures, Motorola would have to change the offsets for
- * registers in the same peripheral device on different models
---- /dev/null
-+++ b/drivers/net/fec_m547x.c
-@@ -0,0 +1,1551 @@
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Kurt Mahan, kmahan@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/ptrace.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/phy.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/bitops.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+
-+#include <asm/dma.h>
-+#include <asm/MCD_dma.h>
-+#include <asm/m5485sram.h>
-+#include <asm/virtconvert.h>
-+#include <asm/irq.h>
-+
-+#include "fec_m547x.h"
-+
-+#ifdef CONFIG_FEC_548x_ENABLE_FEC2
-+#define FEC_MAX_PORTS 2
-+#define FEC_2
-+#else
-+#define FEC_MAX_PORTS 1
-+#undef FEC_2
-+#endif
-+
-+#define VERSION "0.20"
-+MODULE_DESCRIPTION("DMA Fast Ethernet Controller driver ver " VERSION);
-+
-+/* fec private */
-+struct fec_priv {
-+ struct net_device *netdev; /* owning net device */
-+ void *fecpriv_txbuf[FEC_TX_BUF_NUMBER]; /* tx buffer ptrs */
-+ MCD_bufDescFec *fecpriv_txdesc; /* tx descriptor ptrs */
-+ volatile unsigned int fecpriv_current_tx; /* current tx desc index */
-+ volatile unsigned int fecpriv_next_tx; /* next tx desc index */
-+ unsigned int fecpriv_current_rx; /* current rx desc index */
-+ MCD_bufDescFec *fecpriv_rxdesc; /* rx descriptor ptrs */
-+ struct sk_buff *askb_rx[FEC_RX_BUF_NUMBER]; /* rx SKB ptrs */
-+ unsigned int fecpriv_initiator_rx; /* rx dma initiator */
-+ unsigned int fecpriv_initiator_tx; /* tx dma initiator */
-+ int fecpriv_fec_rx_channel; /* rx dma channel */
-+ int fecpriv_fec_tx_channel; /* tx dma channel */
-+ int fecpriv_rx_requestor; /* rx dma requestor */
-+ int fecpriv_tx_requestor; /* tx dma requestor */
-+ void *fecpriv_interrupt_fec_rx_handler; /* dma rx handler */
-+ void *fecpriv_interrupt_fec_tx_handler; /* dma tx handler */
-+ unsigned char *fecpriv_mac_addr; /* private fec mac addr */
-+ struct net_device_stats fecpriv_stat; /* stats ptr */
-+ spinlock_t fecpriv_lock;
-+ int fecpriv_rxflag;
-+ struct tasklet_struct fecpriv_tasklet_reinit;
-+ int index; /* fec hw number */
-+ struct phy_device *phydev;
-+ struct mii_bus *mdio_bus;
-+ int duplex;
-+ int link;
-+ int speed;
-+};
-+
-+struct net_device *fec_dev[FEC_MAX_PORTS];
-+
-+/* FEC functions */
-+static int __init fec_init(void);
-+/*
-+static struct net_device_stats *fec_get_stat(struct net_device *dev);
-+static int fec_open(struct net_device *dev);
-+static int fec_close(struct net_device *nd);
-+static int fec_tx(struct sk_buff *skb, struct net_device *dev);
-+static void fec_set_multicast_list(struct net_device *nd);
-+static int fec_set_mac_address(struct net_device *dev, void *p);
-+static void fec_tx_timeout(struct net_device *dev);
-+*/
-+static void fec_interrupt_fec_tx_handler(struct net_device *dev);
-+static void fec_interrupt_fec_rx_handler(struct net_device *dev);
-+static irqreturn_t fec_interrupt_handler(int irq, void *dev_id);
-+static void fec_interrupt_fec_tx_handler_fec0(void);
-+static void fec_interrupt_fec_rx_handler_fec0(void);
-+static void fec_interrupt_fec_reinit(unsigned long data);
-+
-+/* default fec0 address */
-+unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 };
-+
-+#ifdef FEC_2
-+/* default fec1 address */
-+unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 };
-+#endif
-+
-+extern unsigned char uboot_enet0[];
-+extern unsigned char uboot_enet1[];
-+
-+#ifndef MODULE
-+int fec_str_to_mac(char *str_mac, unsigned char* addr);
-+int __init fec_mac_setup0(char *s);
-+#endif
-+
-+
-+#ifdef FEC_2
-+void fec_interrupt_fec_tx_handler_fec1(void);
-+void fec_interrupt_fec_rx_handler_fec1(void);
-+#endif
-+
-+#ifndef MODULE
-+int __init fec_mac_setup1(char *s);
-+#endif
-+
-+module_init(fec_init);
-+/* module_exit(fec_cleanup); */
-+
-+__setup("mac0=", fec_mac_setup0);
-+
-+#ifdef FEC_2
-+__setup("mac1=", fec_mac_setup1);
-+#endif
-+
-+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
-+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \
-+ (VAL & 0xffff))
-+/* ----------------------------------------------------------- */
-+static int coldfire_fec_mdio_read(struct mii_bus *bus,
-+ int phy_id, int reg)
-+{
-+ int ret;
-+#ifdef CONFIG_FEC_548x_SHARED_PHY
-+ unsigned long base_addr = (unsigned long)FEC_BASE_ADDR_FEC0;
-+#else
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+#endif
-+ int tries = 100;
-+
-+ /* Clear the MII interrupt bit */
-+ FEC_EIR(base_addr) = FEC_EIR_MII;
-+
-+ /* Write to the MII management frame register */
-+ FEC_MMFR(base_addr) = mk_mii_read(reg) | (phy_id << 23);
-+
-+ /* Wait for the reading */
-+ while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) {
-+ udelay(10);
-+
-+ if (!tries) {
-+ printk(KERN_ERR "%s timeout\n", __func__);
-+ return -ETIMEDOUT;
-+ }
-+ tries--;
-+ }
-+
-+ /* Clear the MII interrupt bit */
-+ FEC_EIR(base_addr) = FEC_EIR_MII;
-+ ret = FEC_MMFR(base_addr) & 0x0000FFFF;
-+ return ret;
-+}
-+
-+static int coldfire_fec_mdio_write(struct mii_bus *bus,
-+ int phy_id, int reg, u16 data)
-+{
-+ int ret;
-+#ifdef CONFIG_FEC_548x_SHARED_PHY
-+ unsigned long base_addr = (unsigned long)FEC_BASE_ADDR_FEC0;
-+#else
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+#endif
-+ int tries = 100;
-+
-+ printk(KERN_ERR "%s base_addr %lx, phy_id %x, reg %x, data %x\n",
-+ __func__, base_addr, phy_id, reg, data);
-+ /* Clear the MII interrupt bit */
-+ FEC_EIR(base_addr) = FEC_EIR_MII;
-+
-+ /* Write to the MII management frame register */
-+ FEC_MMFR(base_addr) = mk_mii_write(reg, data) | (phy_id << 23);
-+
-+ /* Wait for the writing */
-+ while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) {
-+ udelay(10);
-+ if (!tries) {
-+ printk(KERN_ERR "%s timeout\n", __func__);
-+ return -ETIMEDOUT;
-+ }
-+ tries--;
-+ }
-+ /* Clear the MII interrupt bit */
-+ FEC_EIR(base_addr) = FEC_EIR_MII;
-+ ret = FEC_MMFR(base_addr) & 0x0000FFFF;
-+
-+ return ret;
-+}
-+
-+static void fec_adjust_link(struct net_device *dev)
-+{
-+ struct fec_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = priv->phydev;
-+ int new_state = 0;
-+
-+ if (phydev->link != PHY_DOWN) {
-+ if (phydev->duplex != priv->duplex) {
-+ new_state = 1;
-+ priv->duplex = phydev->duplex;
-+ }
-+
-+ if (phydev->speed != priv->speed) {
-+ new_state = 1;
-+ priv->speed = phydev->speed;
-+ }
-+
-+ if (priv->link == PHY_DOWN) {
-+ new_state = 1;
-+ priv->link = phydev->link;
-+ }
-+ } else if (priv->link) {
-+ new_state = 1;
-+ priv->link = PHY_DOWN;
-+ priv->speed = 0;
-+ priv->duplex = -1;
-+ }
-+
-+ if (new_state)
-+ phy_print_status(phydev);
-+}
-+
-+static int coldfire_fec_init_phy(struct net_device *dev)
-+{
-+ struct fec_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ int i;
-+ int startnode;
-+
-+#ifdef CONFIG_FEC_548x_SHARED_PHY
-+ if (priv->index == 0)
-+ startnode = 0;
-+ else if (priv->index == 1) {
-+ struct fec_priv *priv0 = netdev_priv(fec_dev[0]);
-+ startnode = priv0->phydev->addr + 1;
-+ } else
-+ startnode = 0;
-+#else
-+ startnode = 0;
-+#endif
-+#ifdef FEC_DEBUG
-+ printk(KERN_ERR "%s priv->index %x, startnode %x\n",
-+ __func__, priv->index, startnode);
-+#endif
-+ /* search for connect PHY device */
-+ for (i = startnode; i < PHY_MAX_ADDR; i++) {
-+ struct phy_device *const tmp_phydev =
-+ priv->mdio_bus->phy_map[i];
-+
-+ if (!tmp_phydev) {
-+#ifdef FEC_DEBUG
-+ printk(KERN_INFO "%s no PHY here at"
-+ "mii_bus->phy_map[%d]\n",
-+ __func__, i);
-+#endif
-+ continue; /* no PHY here... */
-+ }
-+ phydev = tmp_phydev;
-+#ifdef FEC_DEBUG
-+ printk(KERN_INFO "%s find PHY here at"
-+ "mii_bus->phy_map[%d]\n",
-+ __func__, i);
-+#endif
-+ break; /* found it */
-+ }
-+
-+ /* now we are supposed to have a proper phydev, to attach to... */
-+ if (!phydev) {
-+ printk(KERN_INFO "%s: Don't found any phy device at all\n",
-+ dev->name);
-+ return -ENODEV;
-+ }
-+
-+ priv->link = 0;
-+ priv->speed = 0;
-+ priv->duplex = 0;
-+#ifdef FEC_DEBUG
-+ printk(KERN_INFO "%s phydev_busid %s\n", __func__, phydev->dev.bus_id);
-+#endif
-+ phydev = phy_connect(dev, dev_name(&phydev->dev),
-+ &fec_adjust_link, 0, PHY_INTERFACE_MODE_MII);
-+ if (IS_ERR(phydev)) {
-+ printk(KERN_ERR " %s phy_connect failed\n", __func__);
-+ return PTR_ERR(phydev);
-+ }
-+
-+ printk(KERN_INFO "attached phy %i to driver %s\n",
-+ phydev->addr, phydev->drv->name);
-+ priv->phydev = phydev;
-+ return 0;
-+}
-+
-+static int fec_mdio_register(struct net_device *dev,
-+ int slot)
-+{
-+ int err = 0;
-+ struct fec_priv *fp = netdev_priv(dev);
-+
-+ fp->mdio_bus = mdiobus_alloc();
-+ if (!fp->mdio_bus) {
-+ printk(KERN_ERR "ethernet mdiobus_alloc fail\n");
-+ return -ENOMEM;
-+ }
-+
-+ if (slot == 0) {
-+ fp->mdio_bus->name = "Coldfire FEC MII 0 Bus";
-+ strcpy(fp->mdio_bus->id, "0");
-+ } else if (slot == 1) {
-+ fp->mdio_bus->name = "Coldfire FEC MII 1 Bus";
-+ strcpy(fp->mdio_bus->id, "1");
-+ } else {
-+ printk(KERN_ERR "Now coldfire can not"
-+ "support more than 2 mii bus\n");
-+ }
-+
-+ fp->mdio_bus->read = &coldfire_fec_mdio_read;
-+ fp->mdio_bus->write = &coldfire_fec_mdio_write;
-+ fp->mdio_bus->priv = dev;
-+ err = mdiobus_register(fp->mdio_bus);
-+ if (err) {
-+ mdiobus_free(fp->mdio_bus);
-+ printk(KERN_ERR "%s: ethernet mdiobus_register fail %d\n",
-+ dev->name, err);
-+ return -EIO;
-+ }
-+
-+ printk(KERN_INFO "mdiobus_register %s ok\n",
-+ fp->mdio_bus->name);
-+ return err;
-+}
-+
-+/************************************************************************
-+* NAME: mcf547x_fec_open
-+*
-+* DESCRIPTION: This function performs the initialization of
-+* of FEC and corresponding KS8721 transiver
-+*
-+* RETURNS: If no error occurs, this function returns zero.
-+*************************************************************************/
-+static int mcf547x_fec_open(struct net_device *dev)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+ int fduplex;
-+ int i;
-+ int channel;
-+ int error_code = -EBUSY;
-+
-+ fp->link = 0;
-+ fp->duplex = 0;
-+ fp->speed = 0;
-+ coldfire_fec_init_phy(dev);
-+ phy_start(fp->phydev);
-+
-+ /* Receive the DMA channels */
-+ channel = dma_set_channel_fec(fp->fecpriv_rx_requestor);
-+
-+ if (channel == -1) {
-+ printk(KERN_ERR "Dma channel cannot be reserved\n");
-+ goto ERRORS;
-+ }
-+
-+ fp->fecpriv_fec_rx_channel = channel;
-+
-+ dma_connect(channel, (int) fp->fecpriv_interrupt_fec_rx_handler);
-+
-+ channel = dma_set_channel_fec(fp->fecpriv_tx_requestor);
-+
-+ if (channel == -1) {
-+ printk(KERN_ERR "Dma channel cannot be reserved\n");
-+ goto ERRORS;
-+ }
-+
-+ fp->fecpriv_fec_tx_channel = channel;
-+
-+ dma_connect(channel, (int) fp->fecpriv_interrupt_fec_tx_handler);
-+
-+ /* init tasklet for controller reinitialization */
-+ tasklet_init(&fp->fecpriv_tasklet_reinit,
-+ fec_interrupt_fec_reinit, (unsigned long) dev);
-+
-+ /* Reset FIFOs */
-+ FEC_FECFRST(base_addr) |= FEC_SW_RST | FEC_RST_CTL;
-+ FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
-+
-+ /* Reset and disable FEC */
-+ FEC_ECR(base_addr) = FEC_ECR_RESET;
-+
-+ udelay(10);
-+
-+ /* Clear all events */
-+ FEC_EIR(base_addr) = FEC_EIR_CLEAR;
-+
-+ /* Reset FIFO status */
-+ FEC_FECTFSR(base_addr) = FEC_FECTFSR_MSK;
-+ FEC_FECRFSR(base_addr) = FEC_FECRFSR_MSK;
-+
-+ /* Set the default address */
-+ FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) |
-+ (fp->fecpriv_mac_addr[1] << 16) |
-+ (fp->fecpriv_mac_addr[2] << 8) |
-+ fp->fecpriv_mac_addr[3];
-+ FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) |
-+ (fp->fecpriv_mac_addr[5] << 16) | 0x8808;
-+
-+ /* Reset the group address descriptor */
-+ FEC_GALR(base_addr) = 0x00000000;
-+ FEC_GAUR(base_addr) = 0x00000000;
-+
-+ /* Reset the individual address descriptor */
-+ FEC_IALR(base_addr) = 0x00000000;
-+ FEC_IAUR(base_addr) = 0x00000000;
-+
-+ /* Set the receive control register */
-+ FEC_RCR(base_addr) = FEC_RCR_MAX_FRM_SIZE | FEC_RCR_MII;
-+
-+ /* Set the receive FIFO control register */
-+ /*FEC_FECRFCR(base_addr) =
-+ * FEC_FECRFCR_FRM | FEC_FECRFCR_GR | FEC_FECRFCR_MSK;*/
-+ FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR
-+ | (FEC_FECRFCR_MSK
-+ /* disable all but ...*/
-+ & ~FEC_FECRFCR_FAE
-+ /* enable frame accept error*/
-+ & ~FEC_FECRFCR_RXW
-+ /* enable receive wait condition*/
-+ /*& ~FEC_FECRFCR_UF*/
-+ /* enable FIFO underflow*/
-+ );
-+
-+ /* Set the receive FIFO alarm register */
-+ FEC_FECRFAR(base_addr) = FEC_FECRFAR_ALARM;
-+
-+ /* Set the transmit FIFO control register */
-+ /*FEC_FECTFCR(base_addr) =
-+ FEC_FECTFCR_FRM | FEC_FECTFCR_GR | FEC_FECTFCR_MSK;*/
-+ FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR
-+ | (FEC_FECTFCR_MSK
-+ /* disable all but ... */
-+ & ~FEC_FECTFCR_FAE
-+ /* enable frame accept error */
-+ /* & ~FEC_FECTFCR_TXW */
-+ /*enable transmit wait condition*/
-+ /*& ~FEC_FECTFCR_UF*/
-+ /*enable FIFO underflow*/
-+ & ~FEC_FECTFCR_OF);
-+ /* enable FIFO overflow */
-+
-+ /* Set the transmit FIFO alarm register */
-+ FEC_FECTFAR(base_addr) = FEC_FECTFAR_ALARM;
-+
-+ /* Set the Tx FIFO watermark */
-+ FEC_FECTFWR(base_addr) = FEC_FECTFWR_XWMRK;
-+
-+ /* Enable the transmitter to append the CRC */
-+ FEC_CTCWR(base_addr) = FEC_CTCWR_TFCW_CRC;
-+
-+ /* Enable the ethernet interrupts */
-+ /*FEC_EIMR(base_addr) = FEC_EIMR_MASK;*/
-+ FEC_EIMR(base_addr) = FEC_EIMR_DISABLE
-+ | FEC_EIR_LC
-+ | FEC_EIR_RL
-+ | FEC_EIR_HBERR
-+ | FEC_EIR_XFUN
-+ | FEC_EIR_XFERR
-+ | FEC_EIR_RFERR;
-+
-+#if 0
-+ error_code = init_transceiver(base_addr, &fduplex);
-+ if (error_code != 0) {
-+ printk(KERN_ERR "Initialization of the "
-+ "transceiver is failed\n");
-+ goto ERRORS;
-+ }
-+#else
-+ fduplex = 1;
-+#endif
-+ if (fduplex)
-+ /* Enable the full duplex mode */
-+ FEC_TCR(base_addr) = FEC_TCR_FDEN | FEC_TCR_HBC;
-+ else
-+ /* Disable reception of frames while transmitting */
-+ FEC_RCR(base_addr) |= FEC_RCR_DRT;
-+
-+ /* Enable MIB */
-+ FEC_MIBC(base_addr) = FEC_MIBC_ENABLE;
-+
-+ /* Enable FEC */
-+ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
-+ FEC_MSCR(dev->base_addr) = FEC_MII_SPEED;
-+ /* Initialize tx descriptors and start DMA for the transmission */
-+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
-+ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
-+
-+ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+
-+ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
-+
-+ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
-+ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
-+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
-+ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
-+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+ /* Initialize rx descriptors and start DMA for the reception */
-+ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
-+ fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_DMA);
-+ if (!fp->askb_rx[i]) {
-+ fp->fecpriv_rxdesc[i].dataPointer = 0;
-+ fp->fecpriv_rxdesc[i].statCtrl = 0;
-+ fp->fecpriv_rxdesc[i].length = 0;
-+ } else {
-+ skb_reserve(fp->askb_rx[i], 16);
-+ fp->askb_rx[i]->dev = dev;
-+ fp->fecpriv_rxdesc[i].dataPointer =
-+ (unsigned int)virt_to_phys(fp->askb_rx[i]->tail);
-+ fp->fecpriv_rxdesc[i].statCtrl =
-+ MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
-+ fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
-+ }
-+ }
-+
-+ fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+ fp->fecpriv_current_rx = 0;
-+
-+ MCD_startDma(fp->fecpriv_fec_rx_channel, (char *) fp->fecpriv_rxdesc, 0,
-+ (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
-+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx,
-+ FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT,
-+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+ netif_start_queue(dev);
-+ return 0;
-+
-+ERRORS:
-+
-+ /* Remove the channels and return with the error code */
-+ if (fp->fecpriv_fec_rx_channel != -1) {
-+ dma_disconnect(fp->fecpriv_fec_rx_channel);
-+ dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
-+ fp->fecpriv_fec_rx_channel = -1;
-+ }
-+
-+ if (fp->fecpriv_fec_tx_channel != -1) {
-+ dma_disconnect(fp->fecpriv_fec_tx_channel);
-+ dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
-+ fp->fecpriv_fec_tx_channel = -1;
-+ }
-+
-+ return error_code;
-+}
-+
-+/************************************************************************
-+* NAME: mcf547x_fec_close
-+*
-+* DESCRIPTION: This function performs the graceful stop of the
-+* transmission and disables FEC
-+*
-+* RETURNS: This function always returns zero.
-+*************************************************************************/
-+static int mcf547x_fec_close(struct net_device *dev)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+ unsigned long time;
-+ int i;
-+
-+ netif_stop_queue(dev);
-+ phy_disconnect(fp->phydev);
-+ phy_stop(fp->phydev);
-+ /* Perform the graceful stop */
-+ FEC_TCR(base_addr) |= FEC_TCR_GTS;
-+
-+ time = jiffies;
-+
-+ /* Wait for the graceful stop */
-+ while (!(FEC_EIR(base_addr) & FEC_EIR_GRA) && jiffies - time <
-+ (FEC_GR_TIMEOUT * HZ))
-+ schedule();
-+
-+ /* Disable FEC */
-+ FEC_ECR(base_addr) = FEC_ECR_DISABLE;
-+
-+ /* Reset the DMA channels */
-+ spin_lock_irq(&fp->fecpriv_lock);
-+ MCD_killDma(fp->fecpriv_fec_tx_channel);
-+ spin_unlock_irq(&fp->fecpriv_lock);
-+ dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
-+ dma_disconnect(fp->fecpriv_fec_tx_channel);
-+ fp->fecpriv_fec_tx_channel = -1;
-+
-+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
-+ kfree(fp->fecpriv_txbuf[i]);
-+ fp->fecpriv_txbuf[i] = NULL;
-+ }
-+
-+ spin_lock_irq(&fp->fecpriv_lock);
-+ MCD_killDma(fp->fecpriv_fec_rx_channel);
-+ spin_unlock_irq(&fp->fecpriv_lock);
-+
-+ dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
-+ dma_disconnect(fp->fecpriv_fec_rx_channel);
-+ fp->fecpriv_fec_rx_channel = -1;
-+
-+ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
-+ if (fp->askb_rx[i]) {
-+ kfree_skb(fp->askb_rx[i]);
-+ fp->askb_rx[i] = NULL;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/************************************************************************
-+* +NAME: mcf547x_fec_get_stat
-+*
-+* RETURNS: This function returns the statistical information.
-+*************************************************************************/
-+static struct net_device_stats *mcf547x_fec_get_stats(struct net_device *dev)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+ unsigned long base_addr = dev->base_addr;
-+
-+ /* Receive the statistical information */
-+ fp->fecpriv_stat.rx_packets = FECSTAT_RMON_R_PACKETS(base_addr);
-+ fp->fecpriv_stat.tx_packets = FECSTAT_RMON_T_PACKETS(base_addr);
-+ fp->fecpriv_stat.rx_bytes = FECSTAT_RMON_R_OCTETS(base_addr);
-+ fp->fecpriv_stat.tx_bytes = FECSTAT_RMON_T_OCTETS(base_addr);
-+
-+ fp->fecpriv_stat.multicast = FECSTAT_RMON_R_MC_PKT(base_addr);
-+ fp->fecpriv_stat.collisions = FECSTAT_RMON_T_COL(base_addr);
-+
-+ fp->fecpriv_stat.rx_length_errors =
-+ FECSTAT_RMON_R_UNDERSIZE(base_addr) +
-+ FECSTAT_RMON_R_OVERSIZE(base_addr) +
-+ FECSTAT_RMON_R_FRAG(base_addr) +
-+ FECSTAT_RMON_R_JAB(base_addr);
-+ fp->fecpriv_stat.rx_crc_errors = FECSTAT_IEEE_R_CRC(base_addr);
-+ fp->fecpriv_stat.rx_frame_errors = FECSTAT_IEEE_R_ALIGN(base_addr);
-+ fp->fecpriv_stat.rx_over_errors = FECSTAT_IEEE_R_MACERR(base_addr);
-+
-+ fp->fecpriv_stat.tx_carrier_errors = FECSTAT_IEEE_T_CSERR(base_addr);
-+ fp->fecpriv_stat.tx_fifo_errors = FECSTAT_IEEE_T_MACERR(base_addr);
-+ fp->fecpriv_stat.tx_window_errors = FECSTAT_IEEE_T_LCOL(base_addr);
-+
-+ /* I hope that one frame doesn't have more than one error */
-+ fp->fecpriv_stat.rx_errors = fp->fecpriv_stat.rx_length_errors +
-+ fp->fecpriv_stat.rx_crc_errors +
-+ fp->fecpriv_stat.rx_frame_errors +
-+ fp->fecpriv_stat.rx_over_errors +
-+ fp->fecpriv_stat.rx_dropped;
-+ fp->fecpriv_stat.tx_errors = fp->fecpriv_stat.tx_carrier_errors +
-+ fp->fecpriv_stat.tx_fifo_errors +
-+ fp->fecpriv_stat.tx_window_errors +
-+ fp->fecpriv_stat.tx_aborted_errors +
-+ fp->fecpriv_stat.tx_heartbeat_errors +
-+ fp->fecpriv_stat.tx_dropped;
-+
-+ return &fp->fecpriv_stat;
-+}
-+
-+/************************************************************************
-+* NAME: mcf547x_fec_set_multicast_list
-+*
-+* DESCRIPTION: This function sets the frame filtering parameters
-+*************************************************************************/
-+static void mcf547x_fec_set_multicast_list(struct net_device *dev)
-+{
-+ unsigned int crc, data;
-+ int j, k;
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+ struct netdev_hw_addr *ha;
-+
-+ if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI) {
-+ /* Allow all incoming frames */
-+ FEC_GALR(base_addr) = 0xFFFFFFFF;
-+ FEC_GAUR(base_addr) = 0xFFFFFFFF;
-+ return;
-+ }
-+
-+ /* Reset the group address register */
-+ FEC_GALR(base_addr) = 0x00000000;
-+ FEC_GAUR(base_addr) = 0x00000000;
-+
-+ /* Process all addresses */
-+ netdev_for_each_mc_addr(ha, dev) {
-+ /* Processing must be only for the group addresses */
-+ if (!(ha->addr[0] & 1))
-+ continue;
-+
-+ /* Calculate crc value for the current address */
-+ crc = 0xFFFFFFFF;
-+ for (j = 0; j < dev->addr_len; j++) {
-+ data = ha->addr[j];
-+ for (k = 0; k < 8; k++, data >>= 1) {
-+ if ((crc ^ data) & 1)
-+ crc = (crc >> 1) ^ FEC_CRCPOL;
-+ else
-+ crc >>= 1;
-+ }
-+ }
-+
-+ /* Add this value */
-+ crc >>= 26;
-+ crc &= 0x3F;
-+ if (crc > 31)
-+ FEC_GAUR(base_addr) |= 0x1 << (crc - 32);
-+ else
-+ FEC_GALR(base_addr) |= 0x1 << crc;
-+ }
-+}
-+
-+/************************************************************************
-+* NAME: mcf547x_fec_set_mac_address
-+*
-+* DESCRIPTION: This function sets the MAC address
-+*************************************************************************/
-+static int mcf547x_fec_set_mac_address(struct net_device *dev, void *p)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+ struct sockaddr *addr = p;
-+
-+ if (netif_running(dev))
-+ return -EBUSY;
-+
-+ /* Copy a new address to the device structure */
-+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+ /* Copy a new address to the private structure */
-+ memcpy(fp->fecpriv_mac_addr, addr->sa_data, 6);
-+
-+ /* Set the address to the registers */
-+ FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) |
-+ (fp->fecpriv_mac_addr[1] << 16) |
-+ (fp->fecpriv_mac_addr[2] << 8) |
-+ fp->fecpriv_mac_addr[3];
-+ FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) |
-+ (fp->fecpriv_mac_addr[5] << 16) |
-+ 0x8808;
-+
-+ return 0;
-+}
-+
-+/************************************************************************
-+* NAME: mcf547x_fec_start_xmit
-+*
-+* DESCRIPTION: This function starts transmission of the frame using DMA
-+*
-+* RETURNS: This function always returns zero.
-+*************************************************************************/
-+static int mcf547x_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+ void *data, *data_aligned;
-+ int offset;
-+
-+ data = kmalloc(skb->len + 15, GFP_DMA | GFP_ATOMIC);
-+
-+ if (!data) {
-+ fp->fecpriv_stat.tx_dropped++;
-+ dev_kfree_skb(skb);
-+ return 0;
-+ }
-+
-+ offset = (((unsigned long)virt_to_phys(data) + 15) & 0xFFFFFFF0) -
-+ (unsigned long)virt_to_phys(data);
-+ data_aligned = (void *)((unsigned long)data + offset);
-+ memcpy(data_aligned, skb->data, skb->len);
-+
-+ /* flush data cache before initializing
-+ * the descriptor and starting DMA */
-+
-+ spin_lock_irq(&fp->fecpriv_lock);
-+
-+ /* Initialize the descriptor */
-+ fp->fecpriv_txbuf[fp->fecpriv_next_tx] = data;
-+ fp->fecpriv_txdesc[fp->fecpriv_next_tx].dataPointer
-+ = (unsigned int) virt_to_phys(data_aligned);
-+ fp->fecpriv_txdesc[fp->fecpriv_next_tx].length = skb->len;
-+ fp->fecpriv_txdesc[fp->fecpriv_next_tx].statCtrl
-+ |= (MCD_FEC_END_FRAME | MCD_FEC_BUF_READY);
-+ fp->fecpriv_next_tx = (fp->fecpriv_next_tx + 1) & FEC_TX_INDEX_MASK;
-+
-+ if (fp->fecpriv_txbuf[fp->fecpriv_current_tx]
-+ && fp->fecpriv_current_tx == fp->fecpriv_next_tx)
-+ netif_stop_queue(dev);
-+
-+ spin_unlock_irq(&fp->fecpriv_lock);
-+
-+ /* Tell the DMA to continue the transmission */
-+ MCD_continDma(fp->fecpriv_fec_tx_channel);
-+
-+ dev_kfree_skb(skb);
-+
-+ dev->trans_start = jiffies;
-+
-+ return 0;
-+}
-+
-+/************************************************************************
-+* NAME: mcf547x_fec_tx_timeout
-+*
-+* DESCRIPTION: If the interrupt processing of received frames was lost
-+* and DMA stopped the reception, this function clears
-+* the transmission descriptors and starts DMA
-+*
-+*************************************************************************/
-+static void mcf547x_fec_tx_timeout(struct net_device *dev)
-+{
-+ int i;
-+ struct fec_priv *fp = netdev_priv(dev);
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+
-+ spin_lock_irq(&fp->fecpriv_lock);
-+ MCD_killDma(fp->fecpriv_fec_tx_channel);
-+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
-+ kfree(fp->fecpriv_txbuf[i]);
-+ fp->fecpriv_txbuf[i] = NULL;
-+ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
-+ }
-+ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+
-+ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
-+
-+ /* Reset FIFOs */
-+ FEC_FECFRST(base_addr) |= FEC_SW_RST;
-+ FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
-+
-+ /* Reset and disable FEC */
-+ /* FEC_ECR(base_addr) = FEC_ECR_RESET; */
-+
-+ /* Enable FEC */
-+ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
-+
-+ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
-+ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
-+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
-+ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
-+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+ spin_unlock_irq(&fp->fecpriv_lock);
-+
-+ netif_wake_queue(dev);
-+
-+}
-+
-+static const struct net_device_ops mcf547x_fec_netdev_ops = {
-+ .ndo_open = mcf547x_fec_open,
-+ .ndo_stop = mcf547x_fec_close,
-+ .ndo_start_xmit = mcf547x_fec_start_xmit,
-+ .ndo_set_multicast_list = mcf547x_fec_set_multicast_list,
-+ .ndo_set_mac_address = mcf547x_fec_set_mac_address,
-+ .ndo_tx_timeout = mcf547x_fec_tx_timeout,
-+ .ndo_get_stats = mcf547x_fec_get_stats,
-+};
-+
-+/*
-+ * Initialize a FEC device
-+ */
-+int fec_enet_init(struct net_device *dev, int slot)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+ int i;
-+
-+ fp->index = slot;
-+ fp->netdev = dev;
-+ fec_dev[slot] = dev;
-+
-+ if (slot == 0) {
-+ /* disable fec0 */
-+ FEC_ECR(FEC_BASE_ADDR_FEC0) = FEC_ECR_DISABLE;
-+
-+ /* setup the interrupt handler */
-+ dev->irq = 64 + ISC_FEC0;
-+
-+ if (request_irq(dev->irq, fec_interrupt_handler,
-+ IRQF_DISABLED, "ColdFire FEC 0", dev)) {
-+ dev->irq = 0;
-+ printk(KERN_ERR "Cannot allocate FEC0 IRQ\n");
-+ } else {
-+ /* interrupt priority and level */
-+ MCF_ICR(ISC_FEC0) = ILP_FEC0;
-+ }
-+
-+ /* fec base address */
-+ dev->base_addr = FEC_BASE_ADDR_FEC0;
-+
-+ /* requestor numbers */
-+ fp->fecpriv_rx_requestor = DMA_FEC0_RX;
-+ fp->fecpriv_tx_requestor = DMA_FEC0_TX;
-+
-+ /* fec0 handlers */
-+ fp->fecpriv_interrupt_fec_rx_handler =
-+ fec_interrupt_fec_rx_handler_fec0;
-+ fp->fecpriv_interrupt_fec_tx_handler =
-+ fec_interrupt_fec_tx_handler_fec0;
-+
-+ /* tx descriptors */
-+ fp->fecpriv_txdesc = (void *)FEC_TX_DESC_FEC0;
-+
-+ /* rx descriptors */
-+ fp->fecpriv_rxdesc = (void *)FEC_RX_DESC_FEC0;
-+
-+ /* mac addr
-+ if (uboot_enet0[0] || uboot_enet0[1] || uboot_enet0[2] ||
-+ uboot_enet0[3] || uboot_enet0[4] || uboot_enet0[5]) {
-+ use uboot enet 0 addr
-+ memcpy(fec_mac_addr_fec0, uboot_enet0, 6);
-+ }*/
-+ fec_mac_addr_fec0[0] =
-+ (FEC_PALR(FEC_BASE_ADDR_FEC0) >> 24) & 0xFF;
-+ fec_mac_addr_fec0[1] =
-+ (FEC_PALR(FEC_BASE_ADDR_FEC0) >> 16) & 0xFF;
-+ fec_mac_addr_fec0[2] =
-+ (FEC_PALR(FEC_BASE_ADDR_FEC0) >> 8) & 0xFF;
-+ fec_mac_addr_fec0[3] =
-+ (FEC_PALR(FEC_BASE_ADDR_FEC0)) & 0xFF;
-+ fec_mac_addr_fec0[4] =
-+ (FEC_PAUR(FEC_BASE_ADDR_FEC0) >> 24) & 0xFF;
-+ fec_mac_addr_fec0[5] =
-+ (FEC_PAUR(FEC_BASE_ADDR_FEC0) >> 16) & 0xFF;
-+
-+ fp->fecpriv_mac_addr = fec_mac_addr_fec0;
-+ } else {
-+ /* disable fec1 */
-+ FEC_ECR(FEC_BASE_ADDR_FEC1) = FEC_ECR_DISABLE;
-+#ifdef FEC_2
-+ /* setup the interrupt handler */
-+ dev->irq = 64 + ISC_FEC1;
-+
-+ if (request_irq(dev->irq, fec_interrupt_handler,
-+ IRQF_DISABLED, "ColdFire FEC 1", dev)) {
-+ dev->irq = 0;
-+ printk(KERN_ERR "Cannot allocate FEC1 IRQ\n");
-+ } else {
-+ /* interrupt priority and level */
-+ MCF_ICR(ISC_FEC1) = ILP_FEC1;
-+ }
-+
-+ /* fec base address */
-+ dev->base_addr = FEC_BASE_ADDR_FEC1;
-+
-+ /* requestor numbers */
-+ fp->fecpriv_rx_requestor = DMA_FEC1_RX;
-+ fp->fecpriv_tx_requestor = DMA_FEC1_TX;
-+
-+ /* fec1 handlers */
-+ fp->fecpriv_interrupt_fec_rx_handler =
-+ fec_interrupt_fec_rx_handler_fec1;
-+ fp->fecpriv_interrupt_fec_tx_handler =
-+ fec_interrupt_fec_tx_handler_fec1;
-+
-+ /* tx descriptors */
-+ fp->fecpriv_txdesc = (void *)FEC_TX_DESC_FEC1;
-+
-+ /* rx descriptors */
-+ fp->fecpriv_rxdesc = (void *)FEC_RX_DESC_FEC1;
-+
-+ /* mac addr
-+ if (uboot_enet1[0] || uboot_enet1[1] || uboot_enet1[2] ||
-+ uboot_enet1[3] || uboot_enet1[4] || uboot_enet1[5]) {
-+ use uboot enet 1 addr
-+ memcpy(fec_mac_addr_fec1, uboot_enet1, 6);
-+ }*/
-+ fec_mac_addr_fec1[0] =
-+ (FEC_PALR(FEC_BASE_ADDR_FEC1) >> 24) & 0xFF;
-+ fec_mac_addr_fec1[1] =
-+ (FEC_PALR(FEC_BASE_ADDR_FEC1) >> 16) & 0xFF;
-+ fec_mac_addr_fec1[2] =
-+ (FEC_PALR(FEC_BASE_ADDR_FEC1) >> 8) & 0xFF;
-+ fec_mac_addr_fec1[3] =
-+ (FEC_PALR(FEC_BASE_ADDR_FEC1)) & 0xFF;
-+ fec_mac_addr_fec1[4] =
-+ (FEC_PAUR(FEC_BASE_ADDR_FEC1) >> 24) & 0xFF;
-+ fec_mac_addr_fec1[5] =
-+ (FEC_PAUR(FEC_BASE_ADDR_FEC1) >> 16) & 0xFF;
-+
-+ fp->fecpriv_mac_addr = fec_mac_addr_fec1;
-+#endif
-+ }
-+
-+ /* clear MIB */
-+ memset((void *) (dev->base_addr + 0x200), 0, FEC_MIB_LEN);
-+
-+ /* clear the statistics structure */
-+ memset((void *) &(fp->fecpriv_stat), 0,
-+ sizeof(struct net_device_stats));
-+
-+ /* grab the FEC initiators */
-+ dma_set_initiator(fp->fecpriv_tx_requestor);
-+ fp->fecpriv_initiator_tx = dma_get_initiator(fp->fecpriv_tx_requestor);
-+ dma_set_initiator(fp->fecpriv_rx_requestor);
-+ fp->fecpriv_initiator_rx = dma_get_initiator(fp->fecpriv_rx_requestor);
-+
-+ /* reset the DMA channels */
-+ fp->fecpriv_fec_rx_channel = -1;
-+ fp->fecpriv_fec_tx_channel = -1;
-+
-+ for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
-+ fp->askb_rx[i] = NULL;
-+
-+ /* initialize the pointers to the socket buffers */
-+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
-+ fp->fecpriv_txbuf[i] = NULL;
-+
-+ ether_setup(dev);
-+
-+ dev->netdev_ops = &mcf547x_fec_netdev_ops;
-+ dev->watchdog_timeo = FEC_TX_TIMEOUT * HZ;
-+
-+ memcpy(dev->dev_addr, fp->fecpriv_mac_addr, ETH_ALEN);
-+
-+ spin_lock_init(&fp->fecpriv_lock);
-+
-+ /* Initialize FEC/I2C/IRQ Pin Assignment Register*/
-+ FEC_GPIO_PAR_FECI2CIRQ &= 0xF;
-+ FEC_GPIO_PAR_FECI2CIRQ |= FEC_FECI2CIRQ;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Module Initialization
-+ */
-+int __init fec_init(void)
-+{
-+ struct net_device *dev;
-+ int i;
-+ int err;
-+ struct fec_priv *fep;
-+
-+ printk(KERN_INFO "FEC ENET (DMA) Version %s\n", VERSION);
-+
-+ for (i = 0; i < FEC_MAX_PORTS; i++) {
-+ dev = alloc_etherdev(sizeof(struct fec_priv));
-+ if (!dev)
-+ return -ENOMEM;
-+ err = fec_enet_init(dev, i);
-+ if (err) {
-+ free_netdev(dev);
-+ continue;
-+ }
-+
-+ fep = netdev_priv(dev);
-+ FEC_MSCR(dev->base_addr) = FEC_MII_SPEED;
-+#ifdef CONFIG_FEC_548x_SHARED_PHY
-+ if (i == 0)
-+ err = fec_mdio_register(dev, i);
-+ else {
-+ struct fec_priv *priv0 = netdev_priv(fec_dev[0]);
-+ fep->mdio_bus = priv0->mdio_bus;
-+ printk(KERN_INFO "FEC%d SHARED the %s ok\n",
-+ i, fep->mdio_bus->name);
-+ }
-+#else
-+ err = fec_mdio_register(dev, i);
-+#endif
-+ if (err) {
-+ printk(KERN_ERR "%s: ethernet fec_mdio_register\n",
-+ dev->name);
-+ free_netdev(dev);
-+ return -ENOMEM;
-+ }
-+
-+ if (register_netdev(dev) != 0) {
-+ free_netdev(dev);
-+ return -EIO;
-+ }
-+
-+ printk(KERN_INFO "%s: ethernet %s\n",
-+ dev->name, dev->dev_addr);
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * Stop a device
-+ */
-+void fec_stop(struct net_device *dev)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+
-+ dma_remove_initiator(fp->fecpriv_initiator_tx);
-+ dma_remove_initiator(fp->fecpriv_initiator_rx);
-+
-+ if (dev->irq)
-+ free_irq(dev->irq, dev);
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_tx_handler
-+*
-+* DESCRIPTION: This function is called when the data
-+* transmission from the buffer to the FEC is completed.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_tx_handler(struct net_device *dev)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+
-+ /* Release the socket buffer */
-+ kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]);
-+ fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL;
-+
-+ fp->fecpriv_current_tx =
-+ (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK;
-+
-+ if (MCD_dmaStatus(fp->fecpriv_fec_tx_channel) == MCD_DONE) {
-+ for (; fp->fecpriv_current_tx != fp->fecpriv_next_tx;
-+ fp->fecpriv_current_tx =
-+ (fp->fecpriv_current_tx + 1)
-+ & FEC_TX_INDEX_MASK) {
-+ if (fp->fecpriv_txbuf[fp->fecpriv_current_tx]) {
-+ kfree(fp->fecpriv_txbuf[
-+ fp->fecpriv_current_tx]);
-+ fp->fecpriv_txbuf[fp->fecpriv_current_tx]
-+ = NULL;
-+ }
-+ }
-+ }
-+
-+ if (netif_queue_stopped(dev))
-+ netif_wake_queue(dev);
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_rx_handler
-+*
-+* DESCRIPTION: This function is called when the data
-+* reception from the FEC to the reception buffer is completed.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_rx_handler(struct net_device *dev)
-+{
-+ struct fec_priv *fp = netdev_priv(dev);
-+ struct sk_buff *skb;
-+ int i;
-+
-+ fp->fecpriv_rxflag = 1;
-+ /* Some buffers can be missed */
-+ if (!(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl
-+ & MCD_FEC_END_FRAME)) {
-+ /* Find a valid index */
-+ for (i = 0; ((i < FEC_RX_BUF_NUMBER) &&
-+ !(fp->fecpriv_rxdesc[
-+ fp->fecpriv_current_rx].statCtrl
-+ & MCD_FEC_END_FRAME)); i++,
-+ (fp->fecpriv_current_rx =
-+ (fp->fecpriv_current_rx + 1)
-+ & FEC_RX_INDEX_MASK))
-+ ;
-+
-+ if (i == FEC_RX_BUF_NUMBER) {
-+ /* There are no data to process */
-+ /* Tell the DMA to continue the reception */
-+ MCD_continDma(fp->fecpriv_fec_rx_channel);
-+
-+ fp->fecpriv_rxflag = 0;
-+
-+ return;
-+ }
-+ }
-+
-+ for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl
-+ & MCD_FEC_END_FRAME;
-+ fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1)
-+ & FEC_RX_INDEX_MASK) {
-+ if ((fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length
-+ <= FEC_MAXBUF_SIZE) &&
-+ (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length
-+ > 4)) {
-+ /* --tym-- */
-+ skb = fp->askb_rx[fp->fecpriv_current_rx];
-+ if (!skb)
-+ fp->fecpriv_stat.rx_dropped++;
-+ else {
-+ /*
-+ * flush data cache before initializing
-+ * the descriptor and starting DMA
-+ */
-+ skb_put(skb,
-+ (fp->fecpriv_rxdesc[
-+ fp->fecpriv_current_rx].length - 4));
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_rx(skb);
-+ }
-+ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl &=
-+ ~MCD_FEC_END_FRAME;
-+ /* allocate new skbuff */
-+ fp->askb_rx[fp->fecpriv_current_rx] =
-+ alloc_skb(FEC_MAXBUF_SIZE + 16,
-+ /*GFP_ATOMIC |*/ GFP_DMA);
-+ if (!fp->askb_rx[fp->fecpriv_current_rx]) {
-+ fp->fecpriv_rxdesc[
-+ fp->fecpriv_current_rx].dataPointer
-+ = 0;
-+ fp->fecpriv_rxdesc[
-+ fp->fecpriv_current_rx].length = 0;
-+ fp->fecpriv_stat.rx_dropped++;
-+ } else {
-+ skb_reserve(
-+ fp->askb_rx[fp->fecpriv_current_rx], 16);
-+ fp->askb_rx[fp->fecpriv_current_rx]->dev = dev;
-+
-+ /*
-+ * flush data cache before initializing
-+ * the descriptor and starting DMA
-+ */
-+
-+ fp->fecpriv_rxdesc[
-+ fp->fecpriv_current_rx].dataPointer =
-+ (unsigned int) virt_to_phys(
-+ fp->askb_rx[
-+ fp->fecpriv_current_rx]->tail);
-+ fp->fecpriv_rxdesc[
-+ fp->fecpriv_current_rx].length =
-+ FEC_MAXBUF_SIZE;
-+ fp->fecpriv_rxdesc[
-+ fp->fecpriv_current_rx].statCtrl |=
-+ MCD_FEC_BUF_READY;
-+
-+ /*
-+ * flush data cache before initializing
-+ * the descriptor and starting DMA
-+ */
-+ }
-+ }
-+
-+ }
-+
-+ /* Tell the DMA to continue the reception */
-+ MCD_continDma(fp->fecpriv_fec_rx_channel);
-+
-+ fp->fecpriv_rxflag = 0;
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_handler
-+*
-+* DESCRIPTION: This function is called when some special errors occur
-+*
-+*************************************************************************/
-+irqreturn_t fec_interrupt_handler(int irq, void *dev_id)
-+{
-+
-+ struct net_device *dev = (struct net_device *)dev_id;
-+ struct fec_priv *fp = netdev_priv(dev);
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+ unsigned long events;
-+
-+ /* Read and clear the events */
-+ events = FEC_EIR(base_addr) & FEC_EIMR(base_addr);
-+
-+ if (events & FEC_EIR_HBERR) {
-+ fp->fecpriv_stat.tx_heartbeat_errors++;
-+ FEC_EIR(base_addr) = FEC_EIR_HBERR;
-+ }
-+
-+ /* receive/transmit FIFO error */
-+ if (((events & FEC_EIR_RFERR) != 0)
-+ || ((events & FEC_EIR_XFERR) != 0)) {
-+ /* kill DMA receive channel */
-+ MCD_killDma(fp->fecpriv_fec_rx_channel);
-+
-+ /* kill running transmission by DMA */
-+ MCD_killDma(fp->fecpriv_fec_tx_channel);
-+
-+ /* Reset FIFOs */
-+ FEC_FECFRST(base_addr) |= FEC_SW_RST;
-+ FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
-+
-+ /* reset receive FIFO status register */
-+ FEC_FECRFSR(base_addr) = FEC_FECRFSR_FAE |
-+ FEC_FECRFSR_RXW |
-+ FEC_FECRFSR_UF;
-+
-+ /* reset transmit FIFO status register */
-+ FEC_FECTFSR(base_addr) = FEC_FECTFSR_FAE |
-+ FEC_FECTFSR_TXW |
-+ FEC_FECTFSR_UF |
-+ FEC_FECTFSR_OF;
-+
-+ /* reset RFERR and XFERR event */
-+ FEC_EIR(base_addr) = FEC_EIR_RFERR | FEC_EIR_XFERR;
-+
-+ /* stop queue */
-+ netif_stop_queue(dev);
-+
-+ /* execute reinitialization as tasklet */
-+ tasklet_schedule(&fp->fecpriv_tasklet_reinit);
-+
-+ fp->fecpriv_stat.rx_dropped++;
-+ }
-+
-+ /* transmit FIFO underrun */
-+ if ((events & FEC_EIR_XFUN) != 0) {
-+ /* reset XFUN event */
-+ FEC_EIR(base_addr) = FEC_EIR_XFUN;
-+ fp->fecpriv_stat.tx_aborted_errors++;
-+ }
-+
-+ /* late collision */
-+ if ((events & FEC_EIR_LC) != 0) {
-+ /* reset LC event */
-+ FEC_EIR(base_addr) = FEC_EIR_LC;
-+ fp->fecpriv_stat.tx_aborted_errors++;
-+ }
-+
-+ /* collision retry limit */
-+ if ((events & FEC_EIR_RL) != 0) {
-+ /* reset RL event */
-+ FEC_EIR(base_addr) = FEC_EIR_RL;
-+ fp->fecpriv_stat.tx_aborted_errors++;
-+ }
-+ return 0;
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_reinit
-+*
-+* DESCRIPTION: This function is called from interrupt handler
-+* when controller must be reinitialized.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_reinit(unsigned long data)
-+{
-+ int i;
-+ struct net_device *dev = (struct net_device *)data;
-+ struct fec_priv *fp = netdev_priv(dev);
-+ unsigned long base_addr = (unsigned long) dev->base_addr;
-+
-+ /* Initialize reception descriptors and start DMA for the reception */
-+ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
-+ if (!fp->askb_rx[i]) {
-+ fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16,
-+ GFP_ATOMIC | GFP_DMA);
-+ if (!fp->askb_rx[i]) {
-+ fp->fecpriv_rxdesc[i].dataPointer = 0;
-+ fp->fecpriv_rxdesc[i].statCtrl = 0;
-+ fp->fecpriv_rxdesc[i].length = 0;
-+ continue;
-+ }
-+ fp->askb_rx[i]->dev = dev;
-+ skb_reserve(fp->askb_rx[i], 16);
-+ }
-+ fp->fecpriv_rxdesc[i].dataPointer =
-+ (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
-+ fp->fecpriv_rxdesc[i].statCtrl =
-+ MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
-+ fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
-+ }
-+
-+ fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+ fp->fecpriv_current_rx = 0;
-+
-+ /* restart frame transmission */
-+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
-+ kfree(fp->fecpriv_txbuf[i]);
-+ fp->fecpriv_txbuf[i] = NULL;
-+ fp->fecpriv_stat.tx_dropped++;
-+ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
-+ }
-+ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
-+
-+ /* flush entire data cache before restarting the DMA */
-+
-+ /* restart DMA from beginning */
-+ MCD_startDma(fp->fecpriv_fec_rx_channel,
-+ (char *) fp->fecpriv_rxdesc, 0,
-+ (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
-+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx,
-+ FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT,
-+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
-+ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
-+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
-+ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
-+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+ /* Enable FEC */
-+ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
-+
-+ netif_wake_queue(dev);
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_tx_handler_fec0
-+*
-+* DESCRIPTION: This is the DMA interrupt handler using for FEC0
-+* transmission.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_tx_handler_fec0(void)
-+{
-+ fec_interrupt_fec_tx_handler(fec_dev[0]);
-+}
-+
-+#ifdef FEC_2
-+/************************************************************************
-+* NAME: fec_interrupt_tx_handler_fec1
-+*
-+* DESCRIPTION: This is the DMA interrupt handler using for the FEC1
-+* transmission.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_tx_handler_fec1(void)
-+{
-+ fec_interrupt_fec_tx_handler(fec_dev[1]);
-+}
-+#endif
-+
-+/************************************************************************
-+* NAME: fec_interrupt_rx_handler_fec0
-+*
-+* DESCRIPTION: This is the DMA interrupt handler using for the FEC0
-+* reception.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_rx_handler_fec0(void)
-+{
-+ fec_interrupt_fec_rx_handler(fec_dev[0]);
-+}
-+
-+#ifdef FEC_2
-+/************************************************************************
-+* NAME: fec_interrupt_rx_handler_fec1
-+*
-+* DESCRIPTION: This is the DMA interrupt handler using for the FEC1
-+* reception.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_rx_handler_fec1(void)
-+{
-+ fec_interrupt_fec_rx_handler(fec_dev[1]);
-+}
-+
-+#endif
-+
-+#ifndef MODULE
-+/************************************************************************
-+* NAME: fec_mac_setup0
-+*
-+* DESCRIPTION: This function sets the MAC address of FEC0 from command line
-+*
-+*************************************************************************/
-+int __init fec_mac_setup0(char *s)
-+{
-+ if (!s || !*s)
-+ return 1;
-+
-+ if (fec_str_to_mac(s, fec_mac_addr_fec0))
-+ printk(KERN_ERR "The MAC address of FEC0 "
-+ "cannot be set from command line");
-+ return 1;
-+}
-+
-+#ifdef FEC_2
-+
-+/************************************************************************
-+* NAME: fec_mac_setup1
-+*
-+* DESCRIPTION: This function sets the MAC address of FEC1 from command line
-+*
-+*************************************************************************/
-+int __init fec_mac_setup1(char *s)
-+{
-+ if (!s || !*s)
-+ return 1;
-+
-+ if (fec_str_to_mac(s, fec_mac_addr_fec1))
-+ printk(KERN_ERR "The MAC address of FEC1 "
-+ "cannot be set from command line\n");
-+ return 1;
-+}
-+#endif
-+
-+/************************************************************************
-+* NAME: fec_str_to_mac
-+*
-+* DESCRIPTION: This function interprets the character string into MAC addr
-+*
-+*************************************************************************/
-+int fec_str_to_mac(char *str_mac, unsigned char* addr)
-+{
-+ unsigned long val;
-+ char c;
-+ unsigned long octet[6], *octetptr = octet;
-+ int i;
-+
-+again:
-+ val = 0;
-+ while ((c = *str_mac) != '\0') {
-+ if ((c >= '0') && (c <= '9')) {
-+ val = (val * 16) + (c - '0');
-+ str_mac++;
-+ continue;
-+ } else if (((c >= 'a') && (c <= 'f'))
-+ || ((c >= 'A') && (c <= 'F'))) {
-+ val = (val << 4) +
-+ (c + 10 -
-+ (((c >= 'a') && (c <= 'f')) ? 'a' : 'A'));
-+ str_mac++;
-+ continue;
-+ }
-+ break;
-+ }
-+ if (*str_mac == ':') {
-+ *octetptr++ = val, str_mac++;
-+ if (octetptr >= octet + 6)
-+ return 1;
-+ goto again;
-+ }
-+
-+ /* Check for trailing characters */
-+ if (*str_mac && !(*str_mac == ' '))
-+ return 1;
-+
-+ *octetptr++ = val;
-+
-+ if ((octetptr - octet) == 6) {
-+ for (i = 0; i <= 6; i++)
-+ addr[i] = octet[i];
-+ } else
-+ return 1;
-+
-+ return 0;
-+}
-+#endif
---- /dev/null
-+++ b/drivers/net/fec_m547x.h
-@@ -0,0 +1,241 @@
-+#ifndef FEC_M547X_H
-+#define FEC_M547X_H
-+/*
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#define FEC_BASE_ADDR_FEC0 ((unsigned int)MCF_MBAR + 0x9000)
-+#define FEC_BASE_ADDR_FEC1 ((unsigned int)MCF_MBAR + 0x9800)
-+
-+#define FEC_FECI2CIRQ (0xFFC0)
-+#define FEC_GPIO_PAR_FECI2CIRQ \
-+ (*(volatile unsigned short *)((unsigned int)MCF_MBAR + 0xA44))
-+
-+#define FEC_ECR_DISABLE (0x00000000)
-+
-+#define FEC_ECR(x) \
-+ (*(volatile unsigned int *)(x + 0x024))
-+#define FEC_EIR(x) \
-+ (*(volatile unsigned int *)(x + 0x004))
-+#define FEC_PALR(x) \
-+ (*(volatile unsigned int *)(x + 0x0E4))
-+#define FEC_PAUR(x) \
-+ (*(volatile unsigned int *)(x + 0x0E8))
-+#define FEC_IALR(x) \
-+ (*(volatile unsigned int *)(x + 0x11C))
-+#define FEC_IAUR(x) \
-+ (*(volatile unsigned int *)(x + 0x118))
-+#define FEC_GALR(x) \
-+ (*(volatile unsigned int *)(x + 0x124))
-+#define FEC_GAUR(x) \
-+ (*(volatile unsigned int *)(x + 0x120))
-+#define FEC_RCR(x) \
-+ (*(volatile unsigned int *)(x + 0x084))
-+#define FEC_FECRFCR(x) \
-+ (*(volatile unsigned int *)(x + 0x18C))
-+#define FEC_FECRFAR(x) \
-+ (*(volatile unsigned int *)(x + 0x198))
-+#define FEC_FECTFCR(x) \
-+ (*(volatile unsigned int *)(x + 0x1AC))
-+#define FEC_FECTFAR(x) \
-+ (*(volatile unsigned int *)(x + 0x1B8))
-+#define FEC_FECTFWR(x) \
-+ (*(volatile unsigned int *)(x + 0x144))
-+#define FEC_CTCWR(x) \
-+ (*(volatile unsigned int *)(x + 0x1C8))
-+#define FEC_EIMR(x) \
-+ (*(volatile unsigned int *)(x + 0x008))
-+#define FEC_TCR(x) \
-+ (*(volatile unsigned int *)(x + 0x0C4))
-+#define FEC_MIBC(x) \
-+ (*(volatile unsigned int *)(x + 0x064))
-+#define FEC_MSCR(x) \
-+ (*(volatile unsigned int *)(x + 0x044))
-+#define FEC_FECTFDR(x) \
-+ (*(volatile unsigned int *)(x + 0x1A4))
-+#define FEC_FECRFDR(x) \
-+ (*(volatile unsigned int *)(x + 0x184))
-+#define FEC_FECTFSR(x) \
-+ (*(volatile unsigned int *)(x + 0x1A8))
-+#define FEC_FECRFSR(x) \
-+ (*(volatile unsigned int *)(x + 0x188))
-+#define FECSTAT_RMON_R_PACKETS(x) \
-+ (*(volatile unsigned int *)(x + 0x284))
-+#define FECSTAT_RMON_T_PACKETS(x) \
-+ (*(volatile unsigned int *)(x + 0x204))
-+#define FECSTAT_RMON_R_OCTETS(x) \
-+ (*(volatile unsigned int *)(x + 0x2C4))
-+#define FECSTAT_RMON_T_OCTETS(x) \
-+ (*(volatile unsigned int *)(x + 0x244))
-+#define FECSTAT_RMON_R_UNDERSIZE(x) \
-+ (*(volatile unsigned int *)(x + 0x294))
-+#define FECSTAT_RMON_R_OVERSIZE(x) \
-+ (*(volatile unsigned int *)(x + 0x298))
-+#define FECSTAT_RMON_R_FRAG(x) \
-+ (*(volatile unsigned int *)(x + 0x29C))
-+#define FECSTAT_RMON_R_JAB(x) \
-+ (*(volatile unsigned int *)(x + 0x2A0))
-+#define FECSTAT_RMON_R_MC_PKT(x) \
-+ (*(volatile unsigned int *)(x + 0x28C))
-+#define FECSTAT_RMON_T_COL(x) \
-+ (*(volatile unsigned int *)(x + 0x224))
-+#define FECSTAT_IEEE_R_ALIGN(x) \
-+ (*(volatile unsigned int *)(x + 0x2D4))
-+#define FECSTAT_IEEE_R_CRC(x) \
-+ (*(volatile unsigned int *)(x + 0x2D0))
-+#define FECSTAT_IEEE_R_MACERR(x) \
-+ (*(volatile unsigned int *)(x + 0x2D8))
-+#define FECSTAT_IEEE_T_CSERR(x) \
-+ (*(volatile unsigned int *)(x + 0x268))
-+#define FECSTAT_IEEE_T_MACERR(x) \
-+ (*(volatile unsigned int *)(x + 0x264))
-+#define FECSTAT_IEEE_T_LCOL(x) \
-+ (*(volatile unsigned int *)(x + 0x25C))
-+#define FECSTAT_IEEE_R_OCTETS_OK(x) \
-+ (*(volatile unsigned int *)(x + 0x2E0))
-+#define FECSTAT_IEEE_T_OCTETS_OK(x) \
-+ (*(volatile unsigned int *)(x + 0x274))
-+#define FECSTAT_IEEE_R_DROP(x) \
-+ (*(volatile unsigned int *)(x + 0x2C8))
-+#define FECSTAT_IEEE_T_DROP(x) \
-+ (*(volatile unsigned int *)(x + 0x248))
-+#define FECSTAT_IEEE_R_FRAME_OK(x) \
-+ (*(volatile unsigned int *)(x + 0x2CC))
-+#define FECSTAT_IEEE_T_FRAME_OK(x) \
-+ (*(volatile unsigned int *)(x + 0x24C))
-+#define FEC_MMFR(x) \
-+ (*(volatile unsigned int *)(x + 0x040))
-+#define FEC_FECFRST(x) \
-+ (*(volatile unsigned int *)(x + 0x1C4))
-+
-+#define FEC_MAX_FRM_SIZE (1518)
-+#define FEC_MAXBUF_SIZE (1520)
-+
-+/* Register values */
-+#define FEC_ECR_RESET (0x00000001)
-+#define FEC_EIR_CLEAR (0xFFFFFFFF)
-+#define FEC_EIR_RL (0x00100000)
-+#define FEC_EIR_HBERR (0x80000000)
-+#define FEC_EIR_BABR (0x40000000)
-+/* babbling receive error */
-+#define FEC_EIR_BABT (0x20000000)
-+/* babbling transmit error */
-+#define FEC_EIR_TXF (0x08000000)
-+/* transmit frame interrupt */
-+#define FEC_EIR_MII (0x00800000)
-+/* MII interrupt */
-+#define FEC_EIR_LC (0x00200000)
-+/* late collision */
-+#define FEC_EIR_XFUN (0x00080000)
-+/* transmit FIFO underrun */
-+#define FEC_EIR_XFERR (0x00040000)
-+/* transmit FIFO error */
-+#define FEC_EIR_RFERR (0x00020000)
-+/* receive FIFO error */
-+#define FEC_RCR_MAX_FRM_SIZE (FEC_MAX_FRM_SIZE << 16)
-+#define FEC_RCR_MII (0x00000004)
-+#define FEC_FECRFCR_FAE (0x00400000)
-+/* frame accept error */
-+#define FEC_FECRFCR_RXW (0x00200000)
-+/* receive wait condition */
-+#define FEC_FECRFCR_UF (0x00100000)
-+/* receive FIFO underflow */
-+#define FEC_FECRFCR_FRM (0x08000000)
-+#define FEC_FECRFCR_GR (0x7 << 24)
-+
-+#define FEC_EIMR_DISABLE (0x00000000)
-+
-+#define FEC_FECRFAR_ALARM (0x300)
-+#define FEC_FECTFCR_FRM (0x08000000)
-+#define FEC_FECTFCR_GR (0x7 << 24)
-+#define FEC_FECTFCR_FAE (0x00400000)
-+/* frame accept error */
-+#define FEC_FECTFCR_TXW (0x00040000)
-+/* transmit wait condition */
-+#define FEC_FECTFCR_UF (0x00100000)
-+/* transmit FIFO underflow */
-+#define FEC_FECTFCR_OF (0x00080000)
-+/* transmit FIFO overflow */
-+
-+#define FEC_FECTFAR_ALARM (0x100)
-+#define FEC_FECTFWR_XWMRK (0x00000000)
-+
-+#define FEC_FECTFSR_MSK (0xC0B00000)
-+#define FEC_FECTFSR_TXW (0x40000000)
-+/* transmit wait condition */
-+#define FEC_FECTFSR_FAE (0x00800000)
-+/* frame accept error */
-+#define FEC_FECTFSR_UF (0x00200000)
-+/* transmit FIFO underflow */
-+#define FEC_FECTFSR_OF (0x00100000)
-+/* transmit FIFO overflow */
-+
-+#define FEC_FECRFSR_MSK (0x80F00000)
-+#define FEC_FECRFSR_FAE (0x00800000)
-+/* frame accept error */
-+#define FEC_FECRFSR_RXW (0x00400000)
-+/* receive wait condition */
-+#define FEC_FECRFSR_UF (0x00200000)
-+/* receive FIFO underflow */
-+
-+#define FEC_CTCWR_TFCW_CRC (0x03000000)
-+#define FEC_TCR_FDEN (0x00000004)
-+#define FEC_TCR_HBC (0x00000002)
-+#define FEC_RCR_DRT (0x00000002)
-+#define FEC_EIMR_MASK (FEC_EIR_RL | FEC_EIR_HBERR)
-+#define FEC_ECR_ETHEREN (0x00000002)
-+#define FEC_FECTFCR_MSK (0x00FC0000)
-+#define FEC_FECRFCR_MSK (0x00F80000)
-+#define FEC_EIR_GRA (0x10000000)
-+#define FEC_TCR_GTS (0x00000001)
-+#define FEC_MIBC_ENABLE (0x00000000)
-+#define FEC_MIB_LEN (228)
-+#define FEC_PHY_ADDR (0x01)
-+
-+#define FEC_RX_DMA_PRI (6)
-+#define FEC_TX_DMA_PRI (6)
-+
-+#define FEC_TX_BUF_NUMBER (8)
-+#define FEC_RX_BUF_NUMBER (64)
-+
-+#define FEC_TX_INDEX_MASK (0x7)
-+#define FEC_RX_INDEX_MASK (0x3f)
-+
-+#define FEC_RX_DESC_FEC0 SYS_SRAM_FEC_START
-+#define FEC_TX_DESC_FEC0 \
-+ (FEC_RX_DESC_FEC0 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec))
-+
-+#define FEC_RX_DESC_FEC1 \
-+ (SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE/2)
-+#define FEC_TX_DESC_FEC1 \
-+ (FEC_RX_DESC_FEC1 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec))
-+
-+#define FEC_EIR_MII (0x00800000)
-+#define FEC_MMFR_READ (0x60020000)
-+#define FEC_MMFR_WRITE (0x50020000)
-+
-+#define FEC_FLAGS_RX (0x00000001)
-+
-+#define FEC_CRCPOL (0xEDB88320)
-+
-+#define FEC_MII_TIMEOUT (2)
-+#define FEC_GR_TIMEOUT (1)
-+#define FEC_TX_TIMEOUT (1)
-+#define FEC_RX_TIMEOUT (1)
-+
-+#define FEC_SW_RST 0x2000000
-+#define FEC_RST_CTL 0x1000000
-+
-+int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra,
-+ unsigned int *data);
-+int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra,
-+ unsigned int data);
-+
-+#define FEC_MII_SPEED \
-+ ((MCF_CLK / 2) / ((2500000 / 2) * 2))
-+#endif
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -62,6 +62,11 @@ config BROADCOM_PHY
- Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
- and BCM5482 PHYs.
-
-+config BROADCOM5222_PHY
-+ tristate "Drivers for Broadcom5222 PHY"
-+ ---help---
-+ Currently supports the BCM5222 PHYs.
-+
- config BCM63XX_PHY
- tristate "Drivers for Broadcom 63xx SOCs internal PHY"
- ---help---
-@@ -82,6 +87,16 @@ config NATIONAL_PHY
- ---help---
- Currently supports the DP83865 PHY.
-
-+config NATIONAL8364x_PHY
-+ tristate "Drivers for National Semiconductor dp83640 PHYs"
-+ ---help---
-+ Currently supports the DP83640 PHY.
-+
-+config NATIONAL8384x_PHY
-+ tristate "Drivers for National Semiconductor dp83848 dp83849 PHYs"
-+ ---help---
-+ Currently supports the DP83848 PHY.
-+
- config STE10XP
- depends on PHYLIB
- tristate "Driver for STMicroelectronics STe10Xp PHYs"
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o
- obj-$(CONFIG_SMSC_PHY) += smsc.o
- obj-$(CONFIG_VITESSE_PHY) += vitesse.o
- obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
-+obj-$(CONFIG_BROADCOM5222_PHY) += broadcom522x.o
- obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
- obj-$(CONFIG_ICPLUS_PHY) += icplus.o
- obj-$(CONFIG_ADM6996_PHY) += adm6996.o
-@@ -28,6 +29,8 @@ obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
- obj-$(CONFIG_NATIONAL_PHY) += national.o
-+obj-$(CONFIG_NATIONAL8364x_PHY) +=national836x.o
-+obj-$(CONFIG_NATIONAL8384x_PHY) +=national8384x.o
- obj-$(CONFIG_STE10XP) += ste10Xp.o
- obj-$(CONFIG_MICREL_PHY) += micrel.o
- obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
---- /dev/null
-+++ b/drivers/net/phy/broadcom522x.c
-@@ -0,0 +1,170 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Chenghu Wu <b16972@freescale.com>
-+ *
-+ * Driver for broadcom PHYs 522x
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mii.h>
-+#include <linux/ethtool.h>
-+#include <linux/phy.h>
-+#include <linux/netdevice.h>
-+
-+/* DP83865 phy identifier values */
-+#define BCM5222_PHY_ID 0x00406320
-+
-+/* PHY Register */
-+#define BCM5222_TIMEOUT 0x100
-+
-+/* MII Registers */
-+#define BCM5222_CTRL 0x00
-+#define BCM5222_STATUS 0x01
-+#define BCM5222_ID_HIGH 0x02
-+#define BCM5222_ID_LOW 0x03
-+#define BCM5222_AN_ADV 0x04
-+#define BCM5222_AN_LP 0x05
-+#define BCM5222_AN_EXP 0x06
-+#define BCM5222_AN_NEXTPG 0x07
-+#define BCM5222_AN_LP_NPTX 0x08
-+#define BCM5222_AUX_CS 0x18
-+#define BCM5222_AUX_STATUS 0x19
-+
-+/* CONTROL Bits */
-+#define BCM5222_CTRL_RESET 0x8000
-+#define BCM5222_CTRL_LOOPBACK 0x4000
-+#define BCM5222_CTRL_FORCE 0x2000
-+#define BCM5222_CTRL_AUTOEN 0x1000
-+#define BCM5222_CTRL_PWRDN 0x0800
-+#define BCM5222_CTRL_ISOLATE 0x0400
-+#define BCM5222_CTRL_RESTART 0x0200
-+#define BCM5222_CTRL_DUPLEX 0x0100
-+#define BCM5222_CTRL_COLLEN 0x0080
-+
-+/* STATUS Bits */
-+#define BCM5222_STATUS_100T4 0x8000
-+#define BCM5222_STATUS_100TXFDX 0x4000
-+#define BCM5222_STATUS_100TX 0x2000
-+#define BCM5222_STATUS_10FDX 0x1000
-+#define BCM5222_STATUS_10 0x0800
-+#define BCM5222_STATUS_MF_PREAMBLE 0x0040
-+#define BCM5222_STATUS_AN_COMPLETE 0x0020
-+#define BCM5222_STATUS_REMOTE_FAULT 0x0010
-+#define BCM5222_STATUS_AN_CAPABLE 0x0008
-+#define BCM5222_STATUS_LINK 0x0004
-+#define BCM5222_STATUS_JABBER 0x0002
-+#define BCM5222_STATUS_EXT_CAP 0x0001
-+
-+/* ID Values */
-+#define BCM5222_ID_HIGH_VAL 0x0040
-+#define BCM5222_ID_LOW_VAL 0x6320
-+
-+/* Advertise Bits */
-+#define BCM5222_AN_ADV_NEXTPG 0x8000
-+#define BCM5222_AN_ADV_REMOTE_FAULT 0x2000
-+#define BCM5222_AN_ADV_PAUSE 0x0400
-+#define BCM5222_AN_ADV_100T4 0x0200
-+#define BCM5222_AN_ADV_100TXFDX 0x0100
-+#define BCM5222_AN_ADV_100TX 0x0080
-+#define BCM5222_AN_ADV_10FDX 0x0040
-+#define BCM5222_AN_ADV_10 0x0020
-+#define BCM5222_AN_ADV_8023 0x0001
-+#define BCM5222_AN_ADV_ALL \
-+ (BCM5222_AN_ADV_100TXFDX | \
-+ BCM5222_AN_ADV_100TXFDX | \
-+ BCM5222_AN_ADV_100TX | \
-+ BCM5222_AN_ADV_10FDX | \
-+ BCM5222_AN_ADV_10 | \
-+ BCM5222_AN_ADV_8023)
-+
-+/* AUX CTRL/STATUS Bits */
-+#define BCM5222_AUX_CS_JABBER_DIS 0x8000
-+#define BCM5222_AUX_CS_FORCE_LINK 0x4000
-+#define BCM5222_AUX_CS_10M_TX_PWR 0x0100
-+#define BCM5222_AUX_CS_HSQ_LSQ_MASK 0x00c0
-+#define BCM5222_AUX_CS_EDGE_RATE_MASK 0x0030
-+#define BCM5222_AUX_CS_AN_IND 0x0008
-+#define BCM5222_AUX_CS_SPEED_FORCE 0x0004
-+#define BCM5222_AUX_CS_SPEED 0x0002
-+#define BCM5222_AUX_CS_DUPLEX 0x0001
-+
-+/* AUX STATUS Bits */
-+#define BCM5222_AUX_STATUS_AN_COMP 0x8000
-+#define BCM5222_AUX_STATUS_AN_COMPACK 0x4000
-+#define BCM5222_AUX_STATUS_AN_ACKDET 0x2000
-+#define BCM5222_AUX_STATUS_AN_ABDET 0x1000
-+#define BCM5222_AUX_STATUS_AN_PAUSE 0x0800
-+#define BCM5222_AUX_STATUS_AN_HCDMASK 0x0700
-+#define BCM5222_AUX_STATUS_AN_PDFAULT 0x0080
-+#define BCM5222_AUX_STATUS_LP_RMTFAULT 0x0040
-+#define BCM5222_AUX_STATUS_LP_PGRX 0x0020
-+#define BCM5222_AUX_STATUS_LP_NEGABLE 0x0010
-+#define BCM5222_AUX_STATUS_SPEED 0x0008
-+#define BCM5222_AUX_STATUS_LINK 0x0004
-+#define BCM5222_AUX_STATUS_AN_EN 0x0002
-+#define BCM5222_AUX_STATUS_JABBER 0x0001
-+
-+static int bcm5222_config_intr(struct phy_device *phydev)
-+{
-+ int err = 0;
-+ printk(KERN_INFO "%s PHY_INTERRUPT %x\n",
-+ __func__, phydev->interrupts);
-+
-+ return err;
-+}
-+
-+static int bcm5222_ack_interrupt(struct phy_device *phydev)
-+{
-+ return 0;
-+}
-+
-+static int bcm5222_config_init(struct phy_device *phydev)
-+{
-+ return bcm5222_ack_interrupt(phydev);
-+}
-+
-+static struct phy_driver bcm5222_driver = {
-+ .phy_id = BCM5222_PHY_ID,
-+ .phy_id_mask = 0xfffffff0,
-+ .name = "Broadcom BCM5222",
-+ .features = PHY_BASIC_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_init = bcm5222_config_init,
-+ .config_aneg = genphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = bcm5222_ack_interrupt,
-+ .config_intr = bcm5222_config_intr,
-+ .driver = {.owner = THIS_MODULE,}
-+};
-+
-+static int __init bcm5222_init(void)
-+{
-+ int ret;
-+
-+ ret = phy_driver_register(&bcm5222_driver);
-+ if (ret)
-+ goto err1;
-+
-+ return 0;
-+err1:
-+ printk(KERN_INFO "register bcm5222 PHY driver fail\n");
-+ return ret;
-+}
-+
-+static void __exit bcm5222_exit(void)
-+{
-+ phy_driver_unregister(&bcm5222_driver);
-+}
-+
-+MODULE_DESCRIPTION("Broadcom PHY driver");
-+MODULE_LICENSE("GPL v2");
-+
-+module_init(bcm5222_init);
-+module_exit(bcm5222_exit);
---- /dev/null
-+++ b/drivers/net/phy/national836x.c
-@@ -0,0 +1,104 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Chenghu Wu <b16972@freescale.com>
-+ *
-+ * Driver for National Semiconductor PHYs 83640
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mii.h>
-+#include <linux/ethtool.h>
-+#include <linux/phy.h>
-+#include <linux/netdevice.h>
-+
-+/* DP83640 phy identifier values */
-+#define DP83640_PHY_ID 0x20005ce0
-+
-+/* PHY Status Register */
-+#define MII_DP83640_PHYSTST 16
-+/* Interrupt Control Register */
-+#define MII_DP83640_ICR 17
-+/* Interrupt Status and Interrupt EVEN Enable Register */
-+#define MII_DP83640_ISR 18
-+
-+#define MII_DP83640_ICR_IRQEVEN_EN 0x0001
-+#define MII_DP83640_ICR_IRQOUTPUT_EN 0x0002
-+#define MII_DP83640_ISR_ENERGY_EVEN 0x0040
-+#define MII_DP83640_ISR_LINKSTATUS_EVEN 0x0020
-+
-+static int ns_config_intr(struct phy_device *phydev)
-+{
-+ int err;
-+
-+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
-+ err = phy_write(phydev, MII_DP83640_ICR,
-+ MII_DP83640_ICR_IRQEVEN_EN |
-+ MII_DP83640_ICR_IRQOUTPUT_EN);
-+ err = phy_write(phydev, MII_DP83640_ICR,
-+ MII_DP83640_ISR_ENERGY_EVEN |
-+ MII_DP83640_ISR_LINKSTATUS_EVEN);
-+ } else {
-+ err = phy_write(phydev, MII_DP83640_ICR, 0);
-+ }
-+ return err;
-+}
-+
-+static int ns83640_ack_interrupt(struct phy_device *phydev)
-+{
-+ int ret = phy_read(phydev, MII_DP83640_ISR);
-+ if (ret < 0) {
-+ printk(KERN_INFO "%s MII_DP83640_ISR %x\n",
-+ __func__, ret);
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+static int ns83640_config_init(struct phy_device *phydev)
-+{
-+ int ret = phy_read(phydev, MII_DP83640_PHYSTST);
-+ if (ret < 0) {
-+ printk(KERN_INFO "%s MII_DP83640_ISR %x\n",
-+ __func__, ret);
-+ }
-+
-+ return ns83640_ack_interrupt(phydev);
-+}
-+
-+static struct phy_driver dp83640_driver = {
-+ .phy_id = DP83640_PHY_ID,
-+ .phy_id_mask = 0xfffffff0,
-+ .name = "NatSemi DP83640",
-+ .features = PHY_BASIC_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_init = ns83640_config_init,
-+ .config_aneg = genphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = ns83640_ack_interrupt,
-+ .config_intr = ns_config_intr,
-+ .driver = {.owner = THIS_MODULE,}
-+};
-+
-+static int __init ns83640_init(void)
-+{
-+ return phy_driver_register(&dp83640_driver);
-+}
-+
-+static void __exit ns83640_exit(void)
-+{
-+ phy_driver_unregister(&dp83640_driver);
-+}
-+
-+MODULE_DESCRIPTION("NatSemi PHY driver");
-+MODULE_AUTHOR("Chenghu Wu <b16972@freescale.com>");
-+MODULE_LICENSE("GPL v2");
-+
-+module_init(ns83640_init);
-+module_exit(ns83640_exit);
---- /dev/null
-+++ b/drivers/net/phy/national8384x.c
-@@ -0,0 +1,110 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Chenghu Wu <b16972@freescale.com>
-+ *
-+ * Driver for National Semiconductor PHYs 8384x
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mii.h>
-+#include <linux/ethtool.h>
-+#include <linux/phy.h>
-+#include <linux/netdevice.h>
-+
-+/* DP8384x phy identifier values */
-+#define DP83848_PHY_ID 0x20005c90
-+#define DP83849_PHY_ID 0x20005ca0
-+/* PHY Status Register */
-+#define MII_DP8384X_PHYSTST 16
-+
-+static int ns8384x_config_intr(struct phy_device *phydev)
-+{
-+ int err = 0;
-+
-+ return err;
-+}
-+
-+static int ns8384x_ack_interrupt(struct phy_device *phydev)
-+{
-+ return 0;
-+}
-+
-+static int ns8384x_config_init(struct phy_device *phydev)
-+{
-+ int ret = phy_read(phydev, MII_DP8384X_PHYSTST);
-+ if (ret < 0) {
-+ printk(KERN_INFO "%s MII_DP83640_ISR %x\n",
-+ __func__, ret);
-+ }
-+
-+ return ns8384x_ack_interrupt(phydev);
-+}
-+
-+static struct phy_driver dp83848_driver = {
-+ .phy_id = DP83848_PHY_ID,
-+ .phy_id_mask = 0xfffffff0,
-+ .name = "NatSemi DP83848",
-+ .features = PHY_BASIC_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_init = ns8384x_config_init,
-+ .config_aneg = genphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = ns8384x_ack_interrupt,
-+ .config_intr = ns8384x_config_intr,
-+ .driver = {.owner = THIS_MODULE,}
-+};
-+
-+static struct phy_driver dp83849_driver = {
-+ .phy_id = DP83849_PHY_ID,
-+ .phy_id_mask = 0xfffffff0,
-+ .name = "NatSemi DP83849",
-+ .features = PHY_BASIC_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_init = ns8384x_config_init,
-+ .config_aneg = genphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = ns8384x_ack_interrupt,
-+ .config_intr = ns8384x_config_intr,
-+ .driver = {.owner = THIS_MODULE,}
-+};
-+
-+static int __init ns8384x_init(void)
-+{
-+ int ret;
-+
-+ ret = phy_driver_register(&dp83848_driver);
-+ if (ret)
-+ goto err1;
-+
-+ ret = phy_driver_register(&dp83849_driver);
-+ if (ret)
-+ goto err2;
-+
-+ return 0;
-+err2:
-+ printk(KERN_INFO "register dp83849 PHY driver fail\n");
-+ phy_driver_unregister(&dp83848_driver);
-+err1:
-+ printk(KERN_INFO "register dp83848 PHY driver fail\n");
-+ return ret;
-+}
-+
-+static void __exit ns8384x_exit(void)
-+{
-+ phy_driver_unregister(&dp83848_driver);
-+ phy_driver_unregister(&dp83849_driver);
-+}
-+
-+MODULE_DESCRIPTION("NatSemi PHY driver");
-+MODULE_AUTHOR("Chenghu Wu <b16972@freescale.com>");
-+MODULE_LICENSE("GPL v2");
-+
-+module_init(ns8384x_init);
-+module_exit(ns8384x_exit);
diff --git a/target/linux/coldfire/patches/007-Add-eDMA-support-for-MCF5445x.patch b/target/linux/coldfire/patches/007-Add-eDMA-support-for-MCF5445x.patch
deleted file mode 100644
index 3e9d45c..0000000
--- a/target/linux/coldfire/patches/007-Add-eDMA-support-for-MCF5445x.patch
+++ /dev/null
@@ -1,1639 +0,0 @@
-From cd07e01d0c6c207a6138e9d5229dfa8c88ab3879 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:40 +0800
-Subject: [PATCH 07/52] Add eDMA support for MCF5445x
-
-Add MCF5445x on-chip eDMA controller driver.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/include/asm/mcf_edma.h | 246 +++++++++
- drivers/Makefile | 2 +
- drivers/dma/Kconfig | 15 +
- drivers/dma/Makefile | 4 +
- drivers/dma/mcf_edma.c | 1029 ++++++++++++++++++++++++++++++++++++++
- drivers/dma/mcf_edma_test.c | 276 ++++++++++
- 6 files changed, 1572 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/include/asm/mcf_edma.h
- create mode 100644 drivers/dma/mcf_edma.c
- create mode 100644 drivers/dma/mcf_edma_test.c
-
---- /dev/null
-+++ b/arch/m68k/include/asm/mcf_edma.h
-@@ -0,0 +1,246 @@
-+/*
-+ * mcf_edma.h - Coldfire eDMA driver header file.
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Add support for m5441x platform (Lanttor.Guo@freescale.com)
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef _MCF_EDMA_H
-+#define _MCF_EDMA_H
-+
-+#include <asm/mcfsim.h>
-+#include <linux/interrupt.h>
-+#if defined(CONFIG_M5445X)
-+#include <asm/mcf5445x_edma.h>
-+#elif defined(CONFIG_M5441X)
-+#include <asm/mcf5441x_edma.h>
-+#endif
-+#include <linux/scatterlist.h>
-+
-+#define MCF_EDMA_INT0_CHANNEL_BASE (8)
-+#define MCF_EDMA_INT0_CONTROLLER_BASE (64)
-+#define MCF_EDMA_INT0_BASE (MCF_EDMA_INT0_CHANNEL_BASE + \
-+ MCF_EDMA_INT0_CONTROLLER_BASE)
-+#define MCF_EDMA_INT0_NUM (16)
-+#define MCF_EDMA_INT0_END (MCF_EDMA_INT0_NUM)
-+
-+#if defined(CONFIG_M5441X)
-+#define MCF_EDMA_INT1_CHANNEL_BASE (8)
-+#define MCF_EDMA_INT1_CONTROLLER_BASE (128)
-+#define MCF_EDMA_INT1_BASE (MCF_EDMA_INT1_CHANNEL_BASE + \
-+ MCF_EDMA_INT1_CONTROLLER_BASE)
-+#define MCF_EDMA_INT1_NUM (40)
-+#define MCF_EDMA_INT1_END (MCF_EDMA_INT0_END + MCF_EDMA_INT1_NUM)
-+
-+#define MCF_EDMA_INT2_CHANNEL_BASE (0)
-+#define MCF_EDMA_INT2_CONTROLLER_BASE (192)
-+#define MCF_EDMA_INT2_BASE (MCF_EDMA_INT2_CHANNEL_BASE + \
-+ MCF_EDMA_INT2_CONTROLLER_BASE)
-+#define MCF_EDMA_INT2_NUM (8)
-+#define MCF_EDMA_INT2_END (MCF_EDMA_INT1_END + MCF_EDMA_INT2_NUM)
-+
-+#endif
-+
-+#if defined(CONFIG_M5445X)
-+#define MCF_EDMA_CHANNELS (16) /* 0-15 */
-+#elif defined(CONFIG_M5441X)
-+#define MCF_EDMA_CHANNELS (64) /* 0-63 */
-+#endif
-+
-+#define MCF_EDMA_CHANNEL_ANY (0xFF)
-+#define MCF_EDMA_INT_ERR (16) /* edma error interrupt */
-+
-+#define MCF_EDMA_TCD_PER_CHAN 256
-+
-+#ifdef CONFIG_M54455
-+/* eDMA engine TCD memory description */
-+
-+struct TCD {
-+ u32 saddr;
-+ u16 attr;
-+ u16 soff;
-+ u32 nbytes;
-+ u32 slast;
-+ u32 daddr;
-+ u16 citer;
-+ u16 doff;
-+ u32 dlast_sga;
-+ u16 biter;
-+ u16 csr;
-+} __packed;
-+
-+struct fsl_edma_requestbuf {
-+ dma_addr_t saddr;
-+ dma_addr_t daddr;
-+ u32 soff;
-+ u32 doff;
-+ u32 attr;
-+ u32 minor_loop;
-+ u32 len;
-+};
-+
-+/*
-+ * config the eDMA to use the TCD sg feature
-+ *
-+ * @channel: which channel. in fact this function is designed to satisfy
-+ * the ATA driver TCD SG need, i.e. by now it is a special
-+ * func, because it need prev alloc channel TCD physical memory
-+ * first, we add the ATA's in the eDMA init only
-+ * @buf: buffer array to fill the TCDs
-+ * @nents: the size of the buf
-+ */
-+void mcf_edma_sg_config(int channel, struct fsl_edma_requestbuf *buf,
-+ int nents);
-+
-+/*
-+ * The zero-copy version of mcf_edma_sg_config()
-+ */
-+void mcf_edma_sglist_config(int channel, struct scatterlist *sgl, int n_elem,
-+ int dma_dir, u32 addr, u32 attr,
-+ u32 soff, u32 doff, u32 nbytes);
-+#endif
-+
-+/* Setup transfer control descriptor (TCD)
-+ * channel - descriptor number
-+ * source - source address
-+ * dest - destination address
-+ * attr - attributes
-+ * soff - source offset
-+ * nbytes - number of bytes to be transfered in minor loop
-+ * slast - last source address adjustment
-+ * citer - major loop count
-+ * biter - begining minor loop count
-+ * doff - destination offset
-+ * dlast_sga - last destination address adjustment
-+ * major_int - generate interrupt after each major loop
-+ * disable_req - disable DMA request after major loop
-+ */
-+void mcf_edma_set_tcd_params(int channel, u32 source, u32 dest,
-+ u32 attr, u32 soff, u32 nbytes, u32 slast,
-+ u32 citer, u32 biter, u32 doff, u32 dlast_sga,
-+ int major_int, int disable_req);
-+
-+/* Setup transfer control descriptor (TCD) and enable halfway irq
-+ * channel - descriptor number
-+ * source - source address
-+ * dest - destination address
-+ * attr - attributes
-+ * soff - source offset
-+ * nbytes - number of bytes to be transfered in minor loop
-+ * slast - last source address adjustment
-+ * biter - major loop count
-+ * doff - destination offset
-+ * dlast_sga - last destination address adjustment
-+ * disable_req - disable DMA request after major loop
-+ */
-+void mcf_edma_set_tcd_params_halfirq(int channel, u32 source, u32 dest,
-+ u32 attr, u32 soff, u32 nbytes, u32 slast,
-+ u32 biter, u32 doff, u32 dlast_sga,
-+ int disable_req);
-+
-+/* check if dma is done
-+ * channel - descriptor number
-+ * return 1 if done
-+ */
-+int mcf_edma_check_done(int channel);
-+
-+/* Starts eDMA transfer on specified channel
-+ * channel - eDMA TCD number
-+ */
-+static inline void
-+mcf_edma_start_transfer(int channel)
-+{
-+ MCF_EDMA_SERQ = channel;
-+ MCF_EDMA_SSRT = channel;
-+}
-+
-+/* Restart eDMA transfer from halfirq
-+ * channel - eDMA TCD number
-+ */
-+static inline void
-+mcf_edma_confirm_halfirq(int channel)
-+{
-+ /*MCF_EDMA_TCD_CSR(channel) = 7;*/
-+ MCF_EDMA_SSRT = channel;
-+}
-+
-+/* Starts eDMA transfer on specified channel based on peripheral request
-+ * channel - eDMA TCD number
-+ */
-+static inline void mcf_edma_enable_transfer(int channel)
-+{
-+ MCF_EDMA_SERQ = channel;
-+}
-+
-+
-+/* Stops eDMA transfer
-+ * channel - eDMA TCD number
-+ */
-+static inline void
-+mcf_edma_stop_transfer(int channel)
-+{
-+ MCF_EDMA_CINT = channel;
-+ MCF_EDMA_CERQ = channel;
-+}
-+
-+/* Confirm that interrupt has been handled
-+ * channel - eDMA TCD number
-+ */
-+static inline void
-+mcf_edma_confirm_interrupt_handled(int channel)
-+{
-+ MCF_EDMA_CINT = channel;
-+}
-+
-+/**
-+ * mcf_edma_request_channel - Request an eDMA channel
-+ * @channel: channel number. In case it is equal to EDMA_CHANNEL_ANY
-+ * it will be allocated a first free eDMA channel.
-+ * @handler: dma handler
-+ * @error_handler: dma error handler
-+ * @irq_level: irq level for the dma handler
-+ * @arg: argument to pass back
-+ * @lock: optional spinlock to hold over interrupt
-+ * @device_id: device id
-+ *
-+ * Returns allocatedd channel number if success or
-+ * a negative value if failure.
-+ */
-+int mcf_edma_request_channel(int channel,
-+ irqreturn_t(*handler) (int, void *),
-+ void (*error_handler) (int, void *),
-+ u8 irq_level,
-+ void *arg,
-+ spinlock_t *lock, const char *device_id);
-+
-+/**
-+ * Update the channel callback/arg
-+ * @channel: channel number
-+ * @handler: dma handler
-+ * @error_handler: dma error handler
-+ * @arg: argument to pass back
-+ *
-+ * Returns 0 if success or a negative value if failure
-+ */
-+int mcf_edma_set_callback(int channel,
-+ irqreturn_t(*handler) (int, void *),
-+ void (*error_handler) (int, void *), void *arg);
-+
-+/**
-+ * Free the edma channel
-+ * @channel: channel number
-+ * @arg: argument created with
-+ *
-+ * Returns 0 if success or a negative value if failure
-+ */
-+int mcf_edma_free_channel(int channel, void *arg);
-+
-+void mcf_edma_dump_channel(int channel);
-+
-+#endif /* _MCF_EDMA_H */
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_FB_I810) += video
- obj-$(CONFIG_FB_INTEL) += video/intelfb/
-
- obj-$(CONFIG_PARPORT) += parport/
-+obj-$(CONFIG_COLDFIRE_EDMA) += dma/
- obj-y += base/ block/ misc/ mfd/ nfc/
- obj-$(CONFIG_NUBUS) += nubus/
- obj-y += macintosh/
-@@ -114,6 +115,7 @@ obj-$(CONFIG_BCMA) += bcma/
- obj-$(CONFIG_VHOST_NET) += vhost/
- obj-$(CONFIG_VLYNQ) += vlynq/
- obj-$(CONFIG_STAGING) += staging/
-+obj-$(CONFIG_MCD_DMA) += dma/
- obj-y += platform/
- obj-y += ieee802154/
- #common clk code
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -114,6 +114,21 @@ config MPC512X_DMA
- ---help---
- Enable support for the Freescale MPC512x built-in DMA engine.
-
-+config COLDFIRE_EDMA
-+ tristate "Coldfire eDMA support"
-+ default y
-+ depends on COLDFIRE && (M5445X || M5441X)
-+ help
-+ Enable support for Coldfire eDMA controller. For example
-+ used by Coldfire SSI Audio device driver.
-+
-+config COLDFIRE_EDMA_TEST
-+ tristate "Coldfire eDMA simple test module"
-+ default m
-+ depends on COLDFIRE_EDMA
-+ help
-+ This is simple eDMA test module.
-+
- config MV_XOR
- bool "Marvell XOR engine support"
- depends on PLAT_ORION
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -13,10 +13,14 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioat/
- obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
- obj-$(CONFIG_FSL_DMA) += fsldma.o
- obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
-+obj-$(CONFIG_COLDFIRE_EDMA) += mcf_edma.o
-+obj-$(CONFIG_COLDFIRE_EDMA_TEST) += mcf_edma_test.o
- obj-$(CONFIG_MV_XOR) += mv_xor.o
- obj-$(CONFIG_DW_DMAC) += dw_dmac.o
- obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
- obj-$(CONFIG_MX3_IPU) += ipu/
-+obj-$(CONFIG_MCD_DMA) += mcddma.o
-+mcddma-objs := MCD_dmaApi.o MCD_tasks.o MCD_tasksInit.o
- obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
- obj-$(CONFIG_SH_DMAE) += shdma.o
- obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
---- /dev/null
-+++ b/drivers/dma/mcf_edma.c
-@@ -0,0 +1,1029 @@
-+/*
-+ * mcf_edma.c - eDMA driver for Coldfire.
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ * Yaroslav Vinogradov
-+ * Lanttor.Guo@freescale.com add m5441x platform support.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.002 29 February 2008 Andrey Butok, Freescale Semiconductor
-+ * Added support of atomatic channel allocation from the
-+ * channel pool.
-+ * v0.001 12 February 2008 Andrey Butok
-+ * Initial Release - developed on uClinux with 2.6.23 kernel.
-+ * Based on coldfire_edma.c code
-+ * of Yaroslav Vinogradov (Freescale Semiconductor, Inc.)
-+ *
-+ * NOTE: This driver was tested on MCF52277 platform.
-+ * It should also work on other Coldfire platdorms with eDMA module.
-+ *
-+ * TBD: Try to make it more general.
-+ * Try to integrate with current <asm/dma.h> <kernel/dma.c> API
-+ * or use Intel DMA API
-+ */
-+
-+#include <linux/dma-mapping.h>
-+#include <asm/mcf_edma.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <asm/coldfire.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/seq_file.h>
-+#include <linux/proc_fs.h>
-+
-+/* Please add here processors that were tested with this driver */
-+#if !defined(CONFIG_M5227x) && !defined(CONFIG_M5445X) && \
-+ !defined(CONFIG_M5441X)
-+#error "The driver is not tested/designed for your processor!"
-+#endif
-+
-+#define MCF_EDMA_DRIVER_VERSION "Revision: 0.003"
-+#define MCF_EDMA_DRIVER_AUTHOR "Freescale Semiconductor Inc, Andrey Butok"
-+#define MCF_EDMA_DRIVER_DESC "Coldfire EDMA driver."
-+#define MCF_EDMA_DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
-+#define MCF_EDMA_DRIVER_LICENSE "GPL"
-+#define MCF_EDMA_DRIVER_NAME "mcf_edma"
-+
-+#define MCF_EDMA_DEV_MINOR (1)
-+
-+#undef MCF_EDMA_DEBUG
-+
-+#ifdef MCF_EDMA_DEBUG
-+#define DBG(fmt, args...) printk(KERN_INFO "[%s] " fmt, \
-+ __func__, ## args)
-+#else
-+#define DBG(fmt, args...) do {} while (0)
-+#endif
-+
-+#define ERR(format, arg...) printk(KERN_ERR "%s:%s: " format "\n", \
-+ __FILE__, __func__ , ## arg)
-+#define INFO(stuff...) printk(KERN_INFO MCF_EDMA_DRIVER_NAME \
-+ ": " stuff)
-+
-+/* DMA channel pool used for atomtic channel allocation.
-+ * You can edit this list. First candidates are "Not used/Reserved" channels */
-+u8 mcf_edma_channel_pool[] = { 1, /* Not used */
-+ 0, /* External DMA request */
-+ 5, /* UART1 Receive */
-+ 6, /* UART1 Transmit */
-+ 7, /* UART2 Receive */
-+ 8, /* UART2 Transmit */
-+#if defined(CONFIG_M5441X)
-+ 16,
-+ 55,
-+ 56,
-+ 63,
-+#endif
-+};
-+
-+/*
-+ * Callback handler data for each TCD
-+ */
-+struct mcf_edma_isr_record {
-+ irqreturn_t(*irq_handler) (int, void *); /* interrupt handler */
-+ void (*error_handler) (int, void *); /* error interrupt handler */
-+ void *arg; /* argument to pass back */
-+ int allocated; /* busy flag */
-+ spinlock_t *lock; /* spin lock (optional) */
-+ const char *device_id; /* dev id string, used in procfs */
-+};
-+
-+/*
-+ * Device structure
-+ */
-+struct mcf_edma_dev {
-+ struct cdev cdev; /* character device */
-+ struct mcf_edma_isr_record dma_interrupt_handlers[MCF_EDMA_CHANNELS];
-+};
-+
-+/* allocated major device number */
-+static int mcf_edma_major;
-+
-+/* device driver structure */
-+static struct mcf_edma_dev *mcf_edma_devp;
-+
-+#ifdef CONFIG_M54455
-+/* PATA controller structure */
-+static struct {
-+ struct TCD *pata_tcd_va;
-+ dma_addr_t pata_tcd_pa;
-+} fsl_pata_dma_tcd;
-+#endif
-+
-+/* device driver file operations */
-+const struct file_operations mcf_edma_fops = {
-+ .owner = THIS_MODULE,
-+};
-+
-+/**
-+ * mcf_edma_isr - eDMA channel interrupt handler
-+ * @irq: interrupt number
-+ * @dev_id: argument
-+ */
-+static irqreturn_t
-+mcf_edma_isr(int irq, void *dev_id)
-+{
-+ int channel = -1;
-+ int result = IRQ_HANDLED;
-+
-+#if defined(CONFIG_M5445X)
-+ channel = irq - MCF_EDMA_INT0_BASE;
-+#elif defined(CONFIG_M5441X)
-+ if (irq >= MCF_EDMA_INT0_BASE &&
-+ irq < MCF_EDMA_INT0_BASE + MCF_EDMA_INT0_NUM)
-+ channel = irq - MCF_EDMA_INT0_BASE;
-+ else if (irq >= MCF_EDMA_INT1_BASE &&
-+ irq < MCF_EDMA_INT1_BASE + MCF_EDMA_INT1_NUM)
-+ channel = irq - MCF_EDMA_INT1_BASE + MCF_EDMA_INT0_END;
-+ else if (irq == MCF_EDMA_INT2_BASE &&
-+ irq < MCF_EDMA_INT2_BASE + MCF_EDMA_INT2_NUM) {
-+ int i;
-+ for (i = 0; i < MCF_EDMA_INT2_NUM; i++) {
-+ if ((MCF_EDMA_INTH >> 24) & (0x1 << i)) {
-+ channel = irq - MCF_EDMA_INT2_BASE +
-+ MCF_EDMA_INT1_END + i;
-+ break;
-+ }
-+ }
-+ } else {
-+ ERR("Bad irq number at isr!\n");
-+ return result;
-+ }
-+#endif
-+
-+ DBG("\n");
-+
-+ if ((mcf_edma_devp != NULL) &&
-+ (mcf_edma_devp->dma_interrupt_handlers[channel].irq_handler)) {
-+ /* call user irq handler */
-+ if (mcf_edma_devp->dma_interrupt_handlers[channel].lock)
-+ spin_lock(mcf_edma_devp->
-+ dma_interrupt_handlers[channel].lock);
-+
-+ result =
-+ mcf_edma_devp->dma_interrupt_handlers[channel].
-+ irq_handler(channel,
-+ mcf_edma_devp->dma_interrupt_handlers[channel].
-+ arg);
-+
-+ if (mcf_edma_devp->dma_interrupt_handlers[channel].lock)
-+ spin_unlock(mcf_edma_devp->
-+ dma_interrupt_handlers[channel].lock);
-+ } else {
-+ /* no irq handler so just ack it */
-+ mcf_edma_confirm_interrupt_handled(channel);
-+ ERR(" No handler for DMA channel (%d)\n", channel);
-+ }
-+
-+ return result;
-+}
-+
-+/**
-+ * mcf_edma_error_isr - eDMA error interrupt handler
-+ * @irq: interrupt number
-+ * @dev_id: argument
-+ */
-+static irqreturn_t
-+mcf_edma_error_isr(int irq, void *dev_id)
-+{
-+ int i;
-+
-+#if defined(CONFIG_M5445X)
-+ u16 err;
-+
-+ err = MCF_EDMA_ERR;
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ if (err & (1 << i)) {
-+ if (mcf_edma_devp != NULL &&
-+ mcf_edma_devp->dma_interrupt_handlers[i].
-+ error_handler)
-+ mcf_edma_devp->dma_interrupt_handlers[i].
-+ error_handler(i,
-+ mcf_edma_devp->
-+ dma_interrupt_handlers[i].
-+ arg);
-+ else
-+ ERR(" DMA error on channel (%d)\n", i);
-+ }
-+ }
-+#elif defined(CONFIG_M5441X)
-+ u32 errl, errh;
-+
-+ errl = MCF_EDMA_ERRL;
-+ errh = MCF_EDMA_ERRH;
-+
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ if ((errl & (1 << i)) || (errh & (1 << (i - 32)))) {
-+ if (mcf_edma_devp != NULL &&
-+ mcf_edma_devp->dma_interrupt_handlers[i].
-+ error_handler)
-+ mcf_edma_devp->dma_interrupt_handlers[i].
-+ error_handler(i, mcf_edma_devp->
-+ dma_interrupt_handlers[i].arg);
-+ else
-+ ERR(" DMA error on channel (%d)\n", i);
-+ }
-+ }
-+#endif
-+ MCF_EDMA_CERR = MCF_EDMA_CERR_CAER;
-+ return IRQ_HANDLED;
-+}
-+
-+/**
-+ * mcf_edma_check_done - Check if channel is finished or not
-+ * @channel: channel number
-+ * return: 0 if not done yet
-+ */
-+int
-+mcf_edma_check_done(int channel)
-+{
-+ if (channel < 0 || channel > MCF_EDMA_CHANNELS)
-+ return 1;
-+
-+ return MCF_EDMA_TCD_CSR(channel) & MCF_EDMA_TCD_CSR_DONE;
-+}
-+EXPORT_SYMBOL(mcf_edma_check_done);
-+
-+/**
-+ * mcf_edma_set_tcd_params - Set transfer control descriptor (TCD)
-+ * @channel: channel number
-+ * @source: source address
-+ * @dest: destination address
-+ * @attr: attributes
-+ * @soff: source offset
-+ * @nbytes: number of bytes to be transfered in minor loop
-+ * @slast: last source address adjustment
-+ * @citer: major loop count
-+ * @biter: beginning major loop count
-+ * @doff: destination offset
-+ * @dlast_sga: last destination address adjustment
-+ * @major_int: generate interrupt after each major loop
-+ * @disable_req: disable DMA request after major loop
-+ */
-+void
-+mcf_edma_set_tcd_params(int channel, u32 source, u32 dest,
-+ u32 attr, u32 soff, u32 nbytes, u32 slast,
-+ u32 citer, u32 biter, u32 doff, u32 dlast_sga,
-+ int major_int, int disable_req)
-+{
-+ DBG("(%d)\n", channel);
-+
-+ if (channel < 0 || channel > MCF_EDMA_CHANNELS)
-+ return;
-+
-+ MCF_EDMA_TCD_SADDR(channel) = source;
-+ MCF_EDMA_TCD_DADDR(channel) = dest;
-+ MCF_EDMA_TCD_ATTR(channel) = attr;
-+ MCF_EDMA_TCD_SOFF(channel) = MCF_EDMA_TCD_SOFF_SOFF(soff);
-+ MCF_EDMA_TCD_NBYTES(channel) = MCF_EDMA_TCD_NBYTES_NBYTES(nbytes);
-+ MCF_EDMA_TCD_SLAST(channel) = MCF_EDMA_TCD_SLAST_SLAST(slast);
-+ MCF_EDMA_TCD_CITER(channel) = MCF_EDMA_TCD_CITER_CITER(citer);
-+ MCF_EDMA_TCD_BITER(channel) = MCF_EDMA_TCD_BITER_BITER(biter);
-+ MCF_EDMA_TCD_DOFF(channel) = MCF_EDMA_TCD_DOFF_DOFF(doff);
-+ MCF_EDMA_TCD_DLAST_SGA(channel) =
-+ MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga);
-+ MCF_EDMA_TCD_CSR(channel) = 0x0000;
-+
-+ /* interrupt at the end of major loop */
-+ if (major_int)
-+ MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_INT_MAJOR;
-+ else
-+ MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_INT_MAJOR;
-+
-+ /* disable request at the end of major loop of transfer or not */
-+ if (disable_req)
-+ MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_D_REQ;
-+ else
-+ MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_D_REQ;
-+
-+ /* enable error interrupt */
-+ MCF_EDMA_SEEI = MCF_EDMA_SEEI_SEEI(channel);
-+}
-+EXPORT_SYMBOL(mcf_edma_set_tcd_params);
-+#ifdef CONFIG_M54455
-+/**
-+ * mcf_edma_sg_config - config an eDMA channel to use the S/G tcd feature
-+ * @channel: channel number
-+ * @buf: the array of tcd sg
-+ * @nents: number of tcd sg array, the max is 256 set but can modify
-+ *
-+ * limitation:
-+ * currently this function is only for PATA RX/TX on MCF54455,
-+ * so eDMA init does not allocate TCD memory for other memory
-+ *
-+ * TODO:
-+ * any one who need this feature shoule add his own TCD memory init
-+ */
-+void mcf_edma_sg_config(int channel, struct fsl_edma_requestbuf *buf,
-+ int nents)
-+{
-+ struct TCD *vtcd = (struct TCD *)fsl_pata_dma_tcd.pata_tcd_va;
-+ u32 ptcd = fsl_pata_dma_tcd.pata_tcd_pa;
-+ struct fsl_edma_requestbuf *pb = buf;
-+ int i;
-+
-+ if (channel < MCF_EDMA_CHAN_ATA_RX || channel > MCF_EDMA_CHAN_ATA_TX) {
-+ printk(KERN_ERR "mcf edma sg config err, not support\n");
-+ return;
-+ }
-+ if (nents > MCF_EDMA_TCD_PER_CHAN) {
-+ printk(KERN_ERR "Too many SGs, please confirm.%d > %d\n",
-+ nents, MCF_EDMA_TCD_PER_CHAN);
-+ return;
-+ }
-+
-+ /* build our tcd sg array */
-+ for (i = 0; i < nents; i++) {
-+ memset(vtcd, 0 , sizeof(struct TCD));
-+ vtcd->saddr = pb->saddr;
-+ vtcd->daddr = pb->daddr;
-+ vtcd->attr = pb->attr;
-+ vtcd->soff = pb->soff;
-+ vtcd->doff = pb->doff;
-+ vtcd->nbytes = pb->minor_loop;
-+ vtcd->citer = vtcd->biter = pb->len/pb->minor_loop;
-+
-+ if (i != nents - 1) {
-+ vtcd->csr |= MCF_EDMA_TCD_CSR_E_SG;/* we are tcd sg */
-+ vtcd->dlast_sga =
-+ (u32)(ptcd + (i + 1)*sizeof(struct TCD));
-+ } else {
-+ /*this is the last sg, so enable the major int*/
-+ vtcd->csr |= MCF_EDMA_TCD_CSR_INT_MAJOR
-+ |MCF_EDMA_TCD_CSR_D_REQ;
-+ }
-+ pb++;
-+ vtcd++;
-+ }
-+
-+ /* Now setup the firset TCD for this sg to the edma enginee */
-+ vtcd = fsl_pata_dma_tcd.pata_tcd_va;
-+
-+ MCF_EDMA_TCD_CSR(channel) = 0x0000;
-+ MCF_EDMA_TCD_SADDR(channel) = vtcd->saddr;
-+ MCF_EDMA_TCD_DADDR(channel) = vtcd->daddr;
-+ MCF_EDMA_TCD_ATTR(channel) = vtcd->attr;
-+ MCF_EDMA_TCD_SOFF(channel) = MCF_EDMA_TCD_SOFF_SOFF(vtcd->soff);
-+ MCF_EDMA_TCD_NBYTES(channel) = MCF_EDMA_TCD_NBYTES_NBYTES(vtcd->nbytes);
-+ MCF_EDMA_TCD_SLAST(channel) = MCF_EDMA_TCD_SLAST_SLAST(vtcd->slast);
-+ MCF_EDMA_TCD_CITER(channel) = MCF_EDMA_TCD_CITER_CITER(vtcd->citer);
-+ MCF_EDMA_TCD_BITER(channel) = MCF_EDMA_TCD_BITER_BITER(vtcd->biter);
-+ MCF_EDMA_TCD_DOFF(channel) = MCF_EDMA_TCD_DOFF_DOFF(vtcd->doff);
-+ MCF_EDMA_TCD_DLAST_SGA(channel) =
-+ MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(vtcd->dlast_sga);
-+ MCF_EDMA_TCD_CSR(channel) |= vtcd->csr;
-+}
-+EXPORT_SYMBOL(mcf_edma_sg_config);
-+
-+/**
-+ * The zero-copy version of mcf_edma_sg_config
-+ * dma_dir : indicate teh addr direction
-+ */
-+void mcf_edma_sglist_config(int channel, struct scatterlist *sgl, int n_elem,
-+ int dma_dir, u32 addr, u32 attr,
-+ u32 soff, u32 doff, u32 nbytes)
-+{
-+ struct TCD *vtcd = (struct TCD *)fsl_pata_dma_tcd.pata_tcd_va;
-+ u32 ptcd = fsl_pata_dma_tcd.pata_tcd_pa;
-+ struct scatterlist *sg;
-+ u32 si;
-+
-+ if (channel < MCF_EDMA_CHAN_ATA_RX || channel > MCF_EDMA_CHAN_ATA_TX) {
-+ printk(KERN_ERR "mcf edma sg config err, not support\n");
-+ return;
-+ }
-+ if (n_elem > MCF_EDMA_TCD_PER_CHAN) {
-+ printk(KERN_ERR "Too many SGs, please confirm.%d > %d\n",
-+ n_elem, MCF_EDMA_TCD_PER_CHAN);
-+ return;
-+ }
-+
-+ /* build our tcd sg array */
-+ if (dma_dir == DMA_TO_DEVICE) { /* write */
-+ for_each_sg(sgl, sg, n_elem, si) {
-+ memset(vtcd, 0 , sizeof(struct TCD));
-+ vtcd->saddr = sg_dma_address(sg);
-+ vtcd->daddr = addr;
-+ vtcd->attr = attr;
-+ vtcd->soff = soff;
-+ vtcd->doff = doff;
-+ vtcd->nbytes = nbytes;
-+ vtcd->citer = vtcd->biter = sg_dma_len(sg)/nbytes;
-+
-+ if (si != n_elem - 1) {
-+ /* we are tcd sg */
-+ vtcd->csr |= MCF_EDMA_TCD_CSR_E_SG;
-+ vtcd->dlast_sga = (u32)(ptcd + (si + 1) * \
-+ sizeof(struct TCD));
-+ } else {
-+ /*this is the last sg, so enable the major int*/
-+ vtcd->csr |= MCF_EDMA_TCD_CSR_INT_MAJOR
-+ |MCF_EDMA_TCD_CSR_D_REQ;
-+ }
-+ vtcd++;
-+ }
-+ } else {
-+ for_each_sg(sgl, sg, n_elem, si) {
-+ memset(vtcd, 0 , sizeof(struct TCD));
-+ vtcd->daddr = sg_dma_address(sg);
-+ vtcd->saddr = addr;
-+ vtcd->attr = attr;
-+ vtcd->soff = soff;
-+ vtcd->doff = doff;
-+ vtcd->nbytes = nbytes;
-+ vtcd->citer = vtcd->biter = sg_dma_len(sg)/nbytes;
-+
-+ if (si != n_elem - 1) {
-+ /* we are tcd sg */
-+ vtcd->csr |= MCF_EDMA_TCD_CSR_E_SG;
-+ vtcd->dlast_sga = (u32)(ptcd + (si + 1) * \
-+ sizeof(struct TCD));
-+ } else {
-+ /*this is the last sg, so enable the major int*/
-+ vtcd->csr |= MCF_EDMA_TCD_CSR_INT_MAJOR
-+ |MCF_EDMA_TCD_CSR_D_REQ;
-+ }
-+ vtcd++;
-+ }
-+ }
-+
-+ /* Now setup the firset TCD for this sg to the edma enginee */
-+ vtcd = fsl_pata_dma_tcd.pata_tcd_va;
-+
-+ MCF_EDMA_TCD_CSR(channel) = 0x0000;
-+ MCF_EDMA_TCD_SADDR(channel) = vtcd->saddr;
-+ MCF_EDMA_TCD_DADDR(channel) = vtcd->daddr;
-+ MCF_EDMA_TCD_ATTR(channel) = vtcd->attr;
-+ MCF_EDMA_TCD_SOFF(channel) = MCF_EDMA_TCD_SOFF_SOFF(vtcd->soff);
-+ MCF_EDMA_TCD_NBYTES(channel) = MCF_EDMA_TCD_NBYTES_NBYTES(vtcd->nbytes);
-+ MCF_EDMA_TCD_SLAST(channel) = MCF_EDMA_TCD_SLAST_SLAST(vtcd->slast);
-+ MCF_EDMA_TCD_CITER(channel) = MCF_EDMA_TCD_CITER_CITER(vtcd->citer);
-+ MCF_EDMA_TCD_BITER(channel) = MCF_EDMA_TCD_BITER_BITER(vtcd->biter);
-+ MCF_EDMA_TCD_DOFF(channel) = MCF_EDMA_TCD_DOFF_DOFF(vtcd->doff);
-+ MCF_EDMA_TCD_DLAST_SGA(channel) =
-+ MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(vtcd->dlast_sga);
-+
-+ MCF_EDMA_TCD_CSR(channel) |= vtcd->csr;
-+}
-+EXPORT_SYMBOL(mcf_edma_sglist_config);
-+#endif
-+/**
-+ * mcf_edma_set_tcd_params_halfirq - Set TCD AND enable half irq
-+ * @channel: channel number
-+ * @source: source address
-+ * @dest: destination address
-+ * @attr: attributes
-+ * @soff: source offset
-+ * @nbytes: number of bytes to be transfered in minor loop
-+ * @slast: last source address adjustment
-+ * @biter: beginning major loop count
-+ * @doff: destination offset
-+ * @dlast_sga: last destination address adjustment
-+ * @disable_req: disable DMA request after major loop
-+ */
-+void
-+mcf_edma_set_tcd_params_halfirq(int channel, u32 source, u32 dest,
-+ u32 attr, u32 soff, u32 nbytes, u32 slast,
-+ u32 biter, u32 doff, u32 dlast_sga,
-+ int disable_req)
-+{
-+ DBG("(%d)\n", channel);
-+
-+ if (channel < 0 || channel > MCF_EDMA_CHANNELS)
-+ return;
-+
-+ mcf_edma_set_tcd_params(channel, source, dest,
-+ attr, soff, nbytes, slast,
-+ biter, biter, doff, dlast_sga,
-+ 1/*0*/, disable_req);
-+
-+ if (biter < 2)
-+ printk(KERN_ERR "MCF_EDMA: Request for halfway irq denied\n");
-+
-+ /* interrupt midway through major loop */
-+ MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_INT_HALF;
-+}
-+EXPORT_SYMBOL(mcf_edma_set_tcd_params_halfirq);
-+
-+/**
-+ * mcf_edma_request_channel - Request an eDMA channel
-+ * @channel: channel number. In case it is equal to EDMA_CHANNEL_ANY
-+ * it will be allocated a first free eDMA channel.
-+ * @handler: dma handler
-+ * @error_handler: dma error handler
-+ * @irq_level: irq level for the dma handler
-+ * @arg: argument to pass back
-+ * @lock: optional spinlock to hold over interrupt
-+ * @device_id: device id
-+ *
-+ * Returns allocatedd channel number if success or
-+ * a negative value if failure.
-+ */
-+int
-+mcf_edma_request_channel(int channel,
-+ irqreturn_t(*handler) (int, void *),
-+ void (*error_handler) (int, void *),
-+ u8 irq_level,
-+ void *arg, spinlock_t *lock, const char *device_id)
-+{
-+ DBG("\n channel=%d\n", channel);
-+
-+ if (mcf_edma_devp != NULL
-+ && ((channel >= 0 && channel <= MCF_EDMA_CHANNELS)
-+ || (channel == MCF_EDMA_CHANNEL_ANY))) {
-+ if (channel == MCF_EDMA_CHANNEL_ANY) {
-+ int i;
-+ for (i = 0; i < sizeof(mcf_edma_channel_pool); i++) {
-+ if (mcf_edma_devp->dma_interrupt_handlers
-+ [mcf_edma_channel_pool[i]].allocated ==
-+ 0) {
-+ channel = mcf_edma_channel_pool[i];
-+ break;
-+ }
-+ };
-+ if (channel == MCF_EDMA_CHANNEL_ANY)
-+ return -EBUSY;
-+ } else {
-+ if (mcf_edma_devp->dma_interrupt_handlers[channel].
-+ allocated)
-+ return -EBUSY;
-+ }
-+
-+ mcf_edma_devp->dma_interrupt_handlers[channel].allocated = 1;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].irq_handler =
-+ handler;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].error_handler =
-+ error_handler;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].arg = arg;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].lock = lock;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].device_id =
-+ device_id;
-+
-+ /* Initalize interrupt controller to allow eDMA interrupts */
-+#if defined(CONFIG_M5445X)
-+ MCF_INTC0_ICR(MCF_EDMA_INT0_CHANNEL_BASE + channel) = irq_level;
-+ MCF_INTC0_CIMR = MCF_EDMA_INT0_CHANNEL_BASE + channel;
-+#elif defined(CONFIG_M5441X)
-+ if (channel >= 0 && channel < MCF_EDMA_INT0_END) {
-+ MCF_INTC0_ICR(MCF_EDMA_INT0_CHANNEL_BASE + channel) =
-+ irq_level;
-+ MCF_INTC0_CIMR = MCF_EDMA_INT0_CHANNEL_BASE + channel;
-+ } else if (channel >= MCF_EDMA_INT0_END &&
-+ channel < MCF_EDMA_INT1_END) {
-+ MCF_INTC1_ICR(MCF_EDMA_INT1_CHANNEL_BASE +
-+ (channel - MCF_EDMA_INT0_END)) = irq_level;
-+ MCF_INTC1_CIMR = MCF_EDMA_INT1_CHANNEL_BASE +
-+ (channel - MCF_EDMA_INT0_END);
-+ } else if (channel >= MCF_EDMA_INT1_END &&
-+ channel < MCF_EDMA_INT2_END) {
-+ MCF_INTC2_ICR(MCF_EDMA_INT2_CHANNEL_BASE) = irq_level;
-+ MCF_INTC2_CIMR = MCF_EDMA_INT2_CHANNEL_BASE;
-+ } else
-+ ERR("Bad channel number!\n");
-+#endif
-+ return channel;
-+ }
-+ return -EINVAL;
-+}
-+EXPORT_SYMBOL(mcf_edma_request_channel);
-+
-+/**
-+ * mcf_edma_set_callback - Update the channel callback/arg
-+ * @channel: channel number
-+ * @handler: dma handler
-+ * @error_handler: dma error handler
-+ * @arg: argument to pass back
-+ *
-+ * Returns 0 if success or a negative value if failure
-+ */
-+int
-+mcf_edma_set_callback(int channel,
-+ irqreturn_t(*handler) (int, void *),
-+ void (*error_handler) (int, void *), void *arg)
-+{
-+ DBG("\n");
-+
-+ if (mcf_edma_devp != NULL && channel >= 0
-+ && channel <= MCF_EDMA_CHANNELS
-+ && mcf_edma_devp->dma_interrupt_handlers[channel].allocated) {
-+ mcf_edma_devp->dma_interrupt_handlers[channel].irq_handler =
-+ handler;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].error_handler =
-+ error_handler;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].arg = arg;
-+ return 0;
-+ }
-+ return -EINVAL;
-+}
-+EXPORT_SYMBOL(mcf_edma_set_callback);
-+
-+/**
-+ * mcf_edma_free_channel - Free the edma channel
-+ * @channel: channel number
-+ * @arg: argument created with
-+ *
-+ * Returns 0 if success or a negative value if failure
-+ */
-+int
-+mcf_edma_free_channel(int channel, void *arg)
-+{
-+ DBG("\n");
-+
-+ if (mcf_edma_devp != NULL && channel >= 0
-+ && channel <= MCF_EDMA_CHANNELS) {
-+ if (mcf_edma_devp->dma_interrupt_handlers[channel].allocated) {
-+#if 1
-+ if (mcf_edma_devp->dma_interrupt_handlers[channel].
-+ arg != arg)
-+ return -EBUSY;
-+#endif
-+
-+ mcf_edma_devp->dma_interrupt_handlers[channel].
-+ allocated = 0;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].arg =
-+ NULL;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].
-+ irq_handler = NULL;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].
-+ error_handler = NULL;
-+ mcf_edma_devp->dma_interrupt_handlers[channel].lock =
-+ NULL;
-+ }
-+
-+ /* make sure error interrupt is disabled */
-+ MCF_EDMA_CEEI = MCF_EDMA_CEEI_CEEI(channel);
-+
-+ return 0;
-+ }
-+ return -EINVAL;
-+}
-+EXPORT_SYMBOL(mcf_edma_free_channel);
-+
-+/**
-+ * mcf_edma_cleanup - cleanup driver allocated resources
-+ */
-+static void
-+mcf_edma_cleanup(void)
-+{
-+ dev_t devno;
-+ int i;
-+
-+ DBG("\n");
-+
-+ /* disable all error ints */
-+ MCF_EDMA_CEEI = MCF_EDMA_CEEI_CAEE;
-+
-+ /* free interrupts/memory */
-+ if (mcf_edma_devp) {
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ #if defined(CONFIG_M5445X)
-+ free_irq(MCF_EDMA_INT0_BASE + i, mcf_edma_devp);
-+ #elif defined(CONFIG_M5441X)
-+ if (i >= 0 && i < MCF_EDMA_INT0_END)
-+ free_irq(MCF_EDMA_INT0_BASE + i, mcf_edma_devp);
-+ else if (i >= MCF_EDMA_INT0_END &&
-+ i <= MCF_EDMA_INT1_END)
-+ free_irq(MCF_EDMA_INT1_BASE +
-+ (i - MCF_EDMA_INT0_END), mcf_edma_devp);
-+ else if (i >= MCF_EDMA_INT1_END &&
-+ i < MCF_EDMA_INT2_END) {
-+ free_irq(MCF_EDMA_INT2_BASE, mcf_edma_devp);
-+ break;
-+ } else {
-+ ERR("Bad irq number!\n");
-+ return;
-+ }
-+ #endif
-+ }
-+
-+ free_irq(MCF_EDMA_INT0_BASE + MCF_EDMA_INT_ERR, mcf_edma_devp);
-+ cdev_del(&mcf_edma_devp->cdev);
-+ kfree(mcf_edma_devp);
-+ }
-+
-+ /* unregister character device */
-+ devno = MKDEV(mcf_edma_major, 0);
-+ unregister_chrdev_region(devno, 1);
-+}
-+
-+/**
-+ * mcf_edma_dump_channel - dump a channel information
-+ */
-+void
-+mcf_edma_dump_channel(int channel)
-+{
-+ printk(KERN_DEBUG "EDMA Channel %d\n", channel);
-+ printk(KERN_DEBUG " TCD Base = 0x%x\n",
-+ (int)&MCF_EDMA_TCD_SADDR(channel));
-+ printk(KERN_DEBUG " SRCADDR = 0x%lx\n",
-+ MCF_EDMA_TCD_SADDR(channel));
-+ printk(KERN_DEBUG " SRCOFF = 0x%x\n",
-+ MCF_EDMA_TCD_SOFF(channel));
-+ printk(KERN_DEBUG " XFR ATTRIB = 0x%x\n",
-+ MCF_EDMA_TCD_ATTR(channel));
-+ printk(KERN_DEBUG " SRCLAST = 0x%lx\n",
-+ MCF_EDMA_TCD_SLAST(channel));
-+ printk(KERN_DEBUG " DSTADDR = 0x%lx\n",
-+ MCF_EDMA_TCD_DADDR(channel));
-+ printk(KERN_DEBUG " MINOR BCNT = 0x%lx\n",
-+ MCF_EDMA_TCD_NBYTES(channel));
-+ printk(KERN_DEBUG " CUR_LOOP_CNT = 0x%x\n",
-+ MCF_EDMA_TCD_CITER(channel)&0x1ff);
-+ printk(KERN_DEBUG " BEG_LOOP_CNT = 0x%x\n",
-+ MCF_EDMA_TCD_BITER(channel)&0x1ff);
-+ printk(KERN_DEBUG " STATUS = 0x%x\n",
-+ MCF_EDMA_TCD_CSR(channel));
-+
-+}
-+EXPORT_SYMBOL(mcf_edma_dump_channel);
-+
-+#ifdef CONFIG_PROC_FS
-+/*
-+ * proc file system support
-+ */
-+
-+#define FREE_CHANNEL "free"
-+#define DEVICE_UNKNOWN "device unknown"
-+
-+/**
-+ * mcf_edma_proc_show - print out proc info
-+ * @m: seq_file
-+ * @v:
-+ */
-+static int
-+mcf_edma_proc_show(struct seq_file *m, void *v)
-+{
-+ int i;
-+
-+ if (mcf_edma_devp == NULL)
-+ return 0;
-+
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ if (mcf_edma_devp->dma_interrupt_handlers[i].allocated) {
-+ if (mcf_edma_devp->dma_interrupt_handlers[i].device_id)
-+ seq_printf(m, "%2d: %s\n", i,
-+ mcf_edma_devp->
-+ dma_interrupt_handlers[i].
-+ device_id);
-+ else
-+ seq_printf(m, "%2d: %s\n", i, DEVICE_UNKNOWN);
-+ } else
-+ seq_printf(m, "%2d: %s\n", i, FREE_CHANNEL);
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * mcf_edma_proc_open - open the proc file
-+ * @inode: inode ptr
-+ * @file: file ptr
-+ */
-+static int
-+mcf_edma_proc_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, mcf_edma_proc_show, NULL);
-+}
-+
-+static const struct file_operations mcf_edma_proc_operations = {
-+ .open = mcf_edma_proc_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+/**
-+ * mcf_edma_proc_init - initialize proc filesystem
-+ */
-+static int __init
-+mcf_edma_proc_init(void)
-+{
-+ struct proc_dir_entry *e;
-+
-+ e = create_proc_entry("edma", 0, NULL);
-+ if (e)
-+ e->proc_fops = &mcf_edma_proc_operations;
-+
-+ return 0;
-+}
-+
-+#endif
-+
-+/**
-+ * mcf_edma_init - eDMA module init
-+ */
-+static int __init
-+mcf_edma_init(void)
-+{
-+ dev_t dev;
-+ int result;
-+ int i;
-+#ifdef CONFIG_M54455
-+ u32 offset;
-+#endif
-+
-+#if defined(CONFIG_M5441X)
-+ /* edma group priority, default grp0 > grp1 > grp2 > grp3 */
-+ u32 grp0_pri = MCF_EDMA_CR_GRP0PRI(0x00);
-+ u32 grp1_pri = MCF_EDMA_CR_GRP1PRI(0x01);
-+ u32 grp2_pri = MCF_EDMA_CR_GRP2PRI(0x02);
-+ u32 grp3_pri = MCF_EDMA_CR_GRP3PRI(0x03);
-+#endif
-+
-+ DBG("Entry\n");
-+
-+ /* allocate free major number */
-+ result =
-+ alloc_chrdev_region(&dev, MCF_EDMA_DEV_MINOR, 1,
-+ MCF_EDMA_DRIVER_NAME);
-+ if (result < 0) {
-+ ERR("Error %d can't get major number.\n", result);
-+ return result;
-+ }
-+ mcf_edma_major = MAJOR(dev);
-+
-+ /* allocate device driver structure */
-+ mcf_edma_devp = kmalloc(sizeof(struct mcf_edma_dev), GFP_KERNEL);
-+ if (!mcf_edma_devp) {
-+ result = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ /* init handlers (no handlers for beginning) */
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ mcf_edma_devp->dma_interrupt_handlers[i].irq_handler = NULL;
-+ mcf_edma_devp->dma_interrupt_handlers[i].error_handler = NULL;
-+ mcf_edma_devp->dma_interrupt_handlers[i].arg = NULL;
-+ mcf_edma_devp->dma_interrupt_handlers[i].allocated = 0;
-+ mcf_edma_devp->dma_interrupt_handlers[i].lock = NULL;
-+ mcf_edma_devp->dma_interrupt_handlers[i].device_id = NULL;
-+ MCF_EDMA_TCD_CSR(i) = 0x0000;
-+ }
-+
-+ /* register char device */
-+ cdev_init(&mcf_edma_devp->cdev, &mcf_edma_fops);
-+ mcf_edma_devp->cdev.owner = THIS_MODULE;
-+ mcf_edma_devp->cdev.ops = &mcf_edma_fops;
-+ result = cdev_add(&mcf_edma_devp->cdev, dev, 1);
-+ if (result) {
-+ ERR("Error %d adding coldfire-dma device.\n", result);
-+ result = -ENODEV;
-+ goto fail;
-+ }
-+
-+ /* request/enable irq for each eDMA channel */
-+#if defined(CONFIG_M5445X)
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ result = request_irq(MCF_EDMA_INT0_BASE + i,
-+ mcf_edma_isr, IRQF_DISABLED,
-+ MCF_EDMA_DRIVER_NAME, mcf_edma_devp);
-+ if (result) {
-+ ERR("Cannot request irq %d\n",
-+ (MCF_EDMA_INT0_BASE + i));
-+ result = -EBUSY;
-+ goto fail;
-+ }
-+ }
-+#elif defined(CONFIG_M5441X)
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ if (i >= 0 && i < MCF_EDMA_INT0_END) {
-+ result = request_irq(MCF_EDMA_INT0_BASE + i,
-+ mcf_edma_isr, IRQF_DISABLED,
-+ MCF_EDMA_DRIVER_NAME,
-+ mcf_edma_devp);
-+
-+ if (result) {
-+ ERR("Cannot request irq %d\n",
-+ (MCF_EDMA_INT0_BASE + i));
-+ result = -EBUSY;
-+ goto fail;
-+ }
-+ } else if (i >= MCF_EDMA_INT0_END && i < MCF_EDMA_INT1_END) {
-+ result = request_irq(MCF_EDMA_INT1_BASE +
-+ (i - MCF_EDMA_INT0_END),
-+ mcf_edma_isr, IRQF_DISABLED,
-+ MCF_EDMA_DRIVER_NAME,
-+ mcf_edma_devp);
-+
-+ if (result) {
-+ ERR("Cannot request irq %d\n",
-+ (MCF_EDMA_INT1_BASE +
-+ (i - MCF_EDMA_INT0_END)));
-+ result = -EBUSY;
-+ goto fail;
-+ }
-+ } else if (i >= MCF_EDMA_INT1_END && MCF_EDMA_INT2_END) {
-+ result = request_irq(MCF_EDMA_INT2_BASE,
-+ mcf_edma_isr, IRQF_DISABLED,
-+ MCF_EDMA_DRIVER_NAME,
-+ mcf_edma_devp);
-+ if (result) {
-+ ERR("Cannot request irq %d\n",
-+ MCF_EDMA_INT2_BASE);
-+ result = -EBUSY;
-+ goto fail;
-+ }
-+ break;
-+ } else {
-+ ERR(" Cannot request irq because of wrong number!\n");
-+ result = -EBUSY;
-+ goto fail;
-+ }
-+ }
-+#endif
-+
-+ /* request error interrupt */
-+ result = request_irq(MCF_EDMA_INT0_BASE + MCF_EDMA_INT_ERR,
-+ mcf_edma_error_isr, IRQF_DISABLED,
-+ MCF_EDMA_DRIVER_NAME, mcf_edma_devp);
-+ if (result) {
-+ ERR("Cannot request irq %d\n",
-+ (MCF_EDMA_INT0_BASE + MCF_EDMA_INT_ERR));
-+ result = -EBUSY;
-+ goto fail;
-+ }
-+
-+#if defined(CONFIG_M5445X)
-+ MCF_EDMA_CR = 0;
-+#elif defined(CONFIG_M5441X)
-+ MCF_EDMA_CR = (0 | grp0_pri | grp1_pri | grp2_pri | grp3_pri);
-+ DBG("MCF_EDMA_CR = %lx\n", MCF_EDMA_CR);
-+#endif
-+
-+#ifdef CONFIG_M54455
-+ fsl_pata_dma_tcd.pata_tcd_va = (struct TCD *) dma_alloc_coherent(NULL,
-+ MCF_EDMA_TCD_PER_CHAN + 1,
-+ &fsl_pata_dma_tcd.pata_tcd_pa,
-+ GFP_KERNEL);
-+
-+ if (!fsl_pata_dma_tcd.pata_tcd_va) {
-+ printk(KERN_INFO "MCF eDMA alllocate tcd memeory failed\n");
-+ goto fail;
-+ }
-+
-+
-+ offset = (fsl_pata_dma_tcd.pata_tcd_pa & (sizeof(struct TCD)-1)) ;
-+ if (offset) {
-+ /*
-+ * up align the addr to 32B to match the eDMA enginee require,
-+ * ie. sizeof tcd boundary
-+ * */
-+ printk(KERN_INFO "pata tcd original:pa-%x[%x]\n",
-+ fsl_pata_dma_tcd.pata_tcd_pa,
-+ (u32)fsl_pata_dma_tcd.pata_tcd_va);
-+
-+ fsl_pata_dma_tcd.pata_tcd_pa += sizeof(struct TCD) - offset;
-+ fsl_pata_dma_tcd.pata_tcd_va += sizeof(struct TCD) - offset;
-+
-+ printk(KERN_INFO "pata tcd realigned:pa-%x[%x]\n",
-+ fsl_pata_dma_tcd.pata_tcd_pa,
-+ (u32)fsl_pata_dma_tcd.pata_tcd_va);
-+ }
-+#endif
-+#ifdef CONFIG_PROC_FS
-+ mcf_edma_proc_init();
-+#endif
-+
-+ INFO("Initialized successfully\n");
-+ return 0;
-+fail:
-+ mcf_edma_cleanup();
-+ return result;
-+}
-+
-+/**
-+ * mcf_edma_exit - eDMA module exit
-+ */
-+static void __exit
-+mcf_edma_exit(void)
-+{
-+ mcf_edma_cleanup();
-+}
-+
-+#ifdef CONFIG_COLDFIRE_EDMA_MODULE
-+module_init(mcf_edma_init);
-+module_exit(mcf_edma_exit);
-+#else
-+/* get us in early */
-+postcore_initcall(mcf_edma_init);
-+#endif
-+
-+MODULE_DESCRIPTION(MCF_EDMA_DRIVER_INFO);
-+MODULE_AUTHOR(MCF_EDMA_DRIVER_AUTHOR);
-+MODULE_LICENSE(MCF_EDMA_DRIVER_LICENSE);
---- /dev/null
-+++ b/drivers/dma/mcf_edma_test.c
-@@ -0,0 +1,276 @@
-+/*
-+ * mcf_edma_test.c - simple test/example module for Coldfire eDMA.
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.001 29 February 2008 Andrey Butok
-+ * Initial Release
-+ *
-+ * NOTE: This module tests eDMA driver performing
-+ * a simple memory to memory transfer with a 32 bit
-+ * source and destination transfer size that generates
-+ * an interrupt when the transfer is complete.
-+ */
-+
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/seq_file.h>
-+#include <linux/proc_fs.h>
-+#include <asm/mcfsim.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcf_edma.h>
-+#include <asm/cacheflush.h>
-+
-+#define MCF_EDMA_TEST_DRIVER_VERSION "Revision: 0.001"
-+#define MCF_EDMA_TEST_DRIVER_AUTHOR \
-+ "Freescale Semiconductor Inc, Andrey Butok"
-+#define MCF_EDMA_TEST_DRIVER_DESC \
-+ "Simple testing module for Coldfire eDMA "
-+#define MCF_EDMA_TEST_DRIVER_INFO \
-+ MCF_EDMA_TEST_DRIVER_VERSION " " MCF_EDMA_TEST_DRIVER_DESC
-+#define MCF_EDMA_TEST_DRIVER_LICENSE "GPL"
-+#define MCF_EDMA_TEST_DRIVER_NAME "mcf_edma_test"
-+
-+#ifndef TRUE
-+#define TRUE 1
-+#define FALSE 0
-+#endif
-+
-+#define TEST_HALFIRQ
-+
-+/* Global variable used to signal main process when interrupt is recognized */
-+static volatile int mcf_edma_test_interrupt;
-+volatile int *mcf_edma_test_interrupt_p =
-+ (volatile int *) &mcf_edma_test_interrupt;
-+
-+/********************************************************************/
-+static irqreturn_t
-+mcf_edma_test_handler(int channel, void *dev_id)
-+{
-+ int done = mcf_edma_check_done(channel);
-+
-+ /* Clear interrupt flag */
-+ mcf_edma_confirm_interrupt_handled(channel);
-+
-+ if (done) {
-+ printk(KERN_INFO "DMA Finished\n");
-+
-+ /* Set interrupt status flag to TRUE */
-+ mcf_edma_test_interrupt = TRUE;
-+ } else {
-+ printk(KERN_INFO "DMA Halfway Done\n");
-+
-+ /* restart DMA. */
-+ mcf_edma_confirm_halfirq(channel);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void
-+mcf_edma_test_error_handler(int channel, void *dev_id)
-+{
-+ printk(KERN_INFO "DMA ERROR: Channel = %d\n", channel);
-+ printk(KERN_INFO " EDMA_ES = 0x%lx\n", (MCF_EDMA_ES));
-+ mcf_edma_dump_channel(channel);
-+}
-+
-+/********************************************************************/
-+
-+int
-+mcf_edma_test_block_compare(u8 *block1, u8 *block2, u32 size)
-+{
-+ u32 i;
-+
-+ for (i = 0; i < (size); i++) {
-+ if ((*(u8 *) (block1 + i)) != (*(u8 *) (block2 + i))) {
-+ printk(KERN_INFO "Data Mismatch index=0x%x len=0x%x "
-+ "block1=0x%p block2=0x%p\n",
-+ i, size, block1, block2);
-+ return FALSE;
-+ }
-+ }
-+
-+ return TRUE;
-+}
-+
-+/********************************************************************/
-+
-+void
-+mcf_edma_test_run(void)
-+{
-+ u16 byte_count;
-+ u32 i, j;
-+ u8 *start_address;
-+ u8 *dest_address;
-+ u32 test_data;
-+ int channel;
-+ u32 allocated_channels_low = 0;
-+ u32 allocated_channels_high = 0;
-+
-+ printk(KERN_INFO "\n===============================================\n");
-+ printk(KERN_INFO "\nStarting eDMA transfer test!\n");
-+
-+ /* Initialize test variables */
-+ byte_count = 0x2000;
-+ test_data = 0xA5A5A5A5;
-+
-+ /* DMA buffer must be from GFP_DMA zone, so it will not be cached */
-+ start_address = kmalloc(byte_count, GFP_DMA);
-+ if (start_address == NULL) {
-+ printk(KERN_INFO MCF_EDMA_TEST_DRIVER_NAME
-+ ": failed to allocate DMA[%d] buffer\n", byte_count);
-+ goto err_out;
-+ }
-+ dest_address = kmalloc(byte_count, /*GFP_KERNEL*/GFP_DMA);
-+ if (dest_address == NULL) {
-+ printk(KERN_INFO MCF_EDMA_TEST_DRIVER_NAME
-+ ": failed to allocate DMA[%d] buffer\n", byte_count);
-+ goto err_free_mem;
-+ }
-+
-+ /* Test all automatically allocated DMA channels. The test data is
-+ * complemented at the end of the loop, so that the testData value
-+ * isn't the same twice in a row */
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ /* request eDMA channel */
-+ channel = mcf_edma_request_channel(MCF_EDMA_CHANNEL_ANY,
-+ mcf_edma_test_handler,
-+ mcf_edma_test_error_handler,
-+ 0x6,
-+ NULL,
-+ NULL,
-+ MCF_EDMA_TEST_DRIVER_NAME);
-+ if (channel < 0)
-+ goto test_end;
-+
-+
-+ if (channel >= 0 && channel < 32)
-+ allocated_channels_low |= (1 << channel);
-+ else if (channel >= 32 && channel < 64)
-+ allocated_channels_high |= (1 << (channel - 32));
-+
-+ /* Initialize data for DMA to move */
-+ for (j = 0; j < byte_count; j = j + 4) {
-+ *((u32 *) (start_address + j)) = test_data;
-+ *((u32 *) (dest_address + j)) = ~test_data;
-+ }
-+
-+ /* Clear interrupt status indicator */
-+ mcf_edma_test_interrupt = FALSE;
-+
-+ /* Configure DMA Channel TCD */
-+#ifndef TEST_HALFIRQ
-+ /* regular irq on completion */
-+ mcf_edma_set_tcd_params(channel,
-+ (u32)virt_to_phys(start_address),
-+ (u32)virt_to_phys(dest_address),
-+ (0 | MCF_EDMA_TCD_ATTR_SSIZE_32BIT |
-+ MCF_EDMA_TCD_ATTR_DSIZE_32BIT), 0x04,
-+ byte_count, 0x0, 1, 1, 0x04, 0x0, 0x1,
-+ 0x0);
-+#else
-+ /* half completion irq */
-+ mcf_edma_set_tcd_params_halfirq(channel,
-+ (u32)virt_to_phys(start_address),
-+ (u32)virt_to_phys(dest_address),
-+ (MCF_EDMA_TCD_ATTR_SSIZE_32BIT |
-+ MCF_EDMA_TCD_ATTR_DSIZE_32BIT),
-+ 0x04, /* soff */
-+ byte_count/2, /* bytes/loop */
-+ 0x0, /* slast */
-+ 2, /* loop count */
-+ 0x04, /* doff */
-+ 0x0, /* dlast_sga */
-+ 0x0); /* req dis */
-+#endif
-+
-+ printk(KERN_INFO "DMA Channel %d Bytes = 0x%x\n",
-+ channel, byte_count);
-+ /* Start DMA. */
-+ mcf_edma_start_transfer(channel);
-+
-+ printk(KERN_INFO "DMA channel %d started.\n", channel);
-+
-+ /* Wait for DMA to complete */
-+ while (!*mcf_edma_test_interrupt_p)
-+ ;
-+
-+ /* Test data */
-+ if (mcf_edma_test_block_compare
-+ (start_address, dest_address, byte_count))
-+ printk(KERN_INFO "Data are moved correctly.\n");
-+ else
-+ printk(KERN_INFO "ERROR!!! Data error!\n");
-+
-+ printk(KERN_INFO "DMA channel %d test complete.\n", channel);
-+ printk(KERN_INFO "-------------------------------\n");
-+
-+ /* Complement test data so next channel test does not
-+ * use same values */
-+ test_data = ~test_data;
-+ }
-+
-+test_end:
-+ printk(KERN_INFO "All tests are complete\n\n");
-+ printk(KERN_INFO
-+ "It has been automatically allocated %d eDMA channels:\n", i);
-+ for (i = 0; i < MCF_EDMA_CHANNELS; i++) {
-+ if ((allocated_channels_low & (1 << i)) ||
-+ (allocated_channels_high & (1 << (i - 32)))) {
-+ printk(KERN_INFO "%d,\n", i);
-+ mcf_edma_free_channel(i, NULL);
-+ }
-+ }
-+ printk(KERN_INFO "===============================================\n\n");
-+
-+ kfree(dest_address);
-+err_free_mem:
-+ kfree(start_address);
-+err_out:
-+ return;
-+}
-+
-+/********************************************************************/
-+
-+static int __init
-+mcf_edma_test_init(void)
-+{
-+ mcf_edma_test_run();
-+
-+ /* We intentionaly return -EAGAIN to prevent keeping
-+ * the module. It does all its work from init()
-+ * and doesn't offer any runtime functionality */
-+ return -EAGAIN;
-+}
-+
-+static void __exit
-+mcf_edma_test_exit(void)
-+{
-+}
-+
-+module_init(mcf_edma_test_init);
-+module_exit(mcf_edma_test_exit);
-+
-+MODULE_DESCRIPTION(MCF_EDMA_TEST_DRIVER_INFO);
-+MODULE_AUTHOR(MCF_EDMA_TEST_DRIVER_AUTHOR);
-+MODULE_LICENSE(MCF_EDMA_TEST_DRIVER_LICENSE);
diff --git a/target/linux/coldfire/patches/008-Add-DSPI-driver-support-for-MCF5445x-MCF5441x.patch b/target/linux/coldfire/patches/008-Add-DSPI-driver-support-for-MCF5445x-MCF5441x.patch
deleted file mode 100644
index d64837d..0000000
--- a/target/linux/coldfire/patches/008-Add-DSPI-driver-support-for-MCF5445x-MCF5441x.patch
+++ /dev/null
@@ -1,1580 +0,0 @@
-From ec1abf6de20d80b8a2c43f747b5a05aba0ecd3b2 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:40 +0800
-Subject: [PATCH 08/52] Add DSPI driver support for MCF5445x/MCF5441x
-
-Add DSPI driver support for MCF5445x and MCF5441x.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/include/asm/mcfqspi.h | 5 +
- drivers/spi/Kconfig | 35 +
- drivers/spi/Makefile | 1 +
- drivers/spi/dspi_mcf.c | 1486 +++++++++++++++++++++++++++++++++++++++
- 4 files changed, 1527 insertions(+), 0 deletions(-)
- create mode 100644 drivers/spi/dspi_mcf.c
-
---- a/arch/m68k/include/asm/mcfqspi.h
-+++ b/arch/m68k/include/asm/mcfqspi.h
-@@ -2,6 +2,7 @@
- * Definitions for Freescale Coldfire QSPI module
- *
- * Copyright 2010 Steven King <sfking@fdwdc.com>
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
-@@ -21,6 +22,10 @@
- #ifndef mcfqspi_h
- #define mcfqspi_h
-
-+#define QSPI_CS_INIT 0x01
-+#define QSPI_CS_ASSERT 0x02
-+#define QSPI_CS_DROP 0x04
-+
- #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
- #define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
- #elif defined(CONFIG_M5249)
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -154,6 +154,41 @@ config SPI_GPIO
- GPIO operations, you should be able to leverage that for better
- speed with a custom version of this driver; see the source code.
-
-+config SPI_DSPI
-+ tristate "Coldfire DSPI"
-+ depends on SPI_MASTER && COLDFIRE
-+ help
-+ SPI driver for Coldfire DSPI driver only.
-+
-+choice
-+ prompt "Selsect DSPI controller"
-+ depends on SPI_DSPI && M5441X
-+ default DSPI0
-+
-+config DSPI0
-+ bool "DSPI0 controller"
-+ help
-+ DSPI0 controller on m5441x platform
-+
-+config DSP0_SBF_CS
-+ hex
-+ prompt "Chip select for serial flash on DSPI0"
-+ depends on DSPI0 && M5441X
-+ default 1
-+
-+config DSPI1
-+ bool "DSPI1 controller"
-+ help
-+ DSPI1 controller on m5441x platform
-+endchoice
-+
-+config SPI_COLDFIRE_DSPI_EDMA
-+ boolean "Coldfire DSPI master driver uses eDMA"
-+ depends on SPI_MASTER && COLDFIRE && SPI_DSPI && COLDFIRE_EDMA
-+ default n
-+ help
-+ Say "yes" if you want DSPI master driver to use eDMA for transfers.
-+
- config SPI_IMX_VER_IMX1
- def_bool y if SOC_IMX1
-
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -23,6 +23,7 @@ dw_spi_midpci-objs := dw_spi_pci.o dw_
- obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o
- obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o
- obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
-+obj-$(CONFIG_SPI_DSPI) += dspi_mcf.o
- obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX) += spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
---- /dev/null
-+++ b/drivers/spi/dspi_mcf.c
-@@ -0,0 +1,1486 @@
-+/*
-+ * dspi_mcf.c - DSPI controller for ColdFire processors
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Matt Waddel Matt.Waddel@freescale.com
-+ * Kurt Mahan kmahan@freescale.com
-+ * Wang Huan <b18965@freescale.com>
-+ * Jingchang Lu <b22599@freescale.com>
-+ * Lanttor.Guo@freescale.com
-+ *
-+ * Based on spi_coldfire.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.003 M5301x support.
-+ * v0.002 M547x/M548x support.
-+ * v0.001 Initial version. Coldfire DSPI master driver.
-+ ****************************************************************************/
-+
-+/*
-+ * Includes
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/workqueue.h>
-+#include <linux/delay.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfqspi.h>
-+#include <asm/coldfire.h>
-+#include <linux/io.h>
-+#include <asm/mcfdspi.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <linux/time.h>
-+#undef DSPI_COLDFIRE_DEBUG
-+
-+#ifdef DSPI_COLDFIRE_DEBUG
-+#define DBG(fmt, args...) \
-+ printk(KERN_INFO "[%s] " fmt , __func__, ## args)
-+#else
-+#define DBG(fmt, args...) do {} while (0)
-+#endif
-+
-+#if defined(CONFIG_M5445X)
-+#include <asm/mcf5445x_dspi.h>
-+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
-+ #include <asm/mcf5445x_edma.h>
-+#endif
-+#elif defined(CONFIG_M5441X)
-+#include <asm/mcf5441x_dspi.h>
-+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
-+#include <asm/mcf5441x_edma.h>
-+#endif
-+#endif
-+
-+#if defined(CONFIG_M547X_8X)
-+#include <asm/virtconvert.h>
-+#include <asm/m5485dspi.h>
-+#endif
-+
-+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
-+#include <asm/mcf_edma.h>
-+#define SPI_DSPI_EDMA
-+#define EDMA_BUFSIZE_KMALLOC (DSPI_FIFO_SIZE*4)
-+#if defined(CONFIG_M5445X)
-+#define DSPI_DMA_RX_TCD MCF_EDMA_CHAN_DSPI_RX
-+#define DSPI_DMA_TX_TCD MCF_EDMA_CHAN_DSPI_TX
-+#elif defined(CONFIG_M5441X)
-+#if defined(CONFIG_DSPI0)
-+#define DSPI_DMA_RX_TCD MCF_EDMA_CHAN_DSPI0_RX
-+#define DSPI_DMA_TX_TCD MCF_EDMA_CHAN_DSPI0_TX
-+#elif defined(CONFIG_DSPI1)
-+#define DSPI_DMA_RX_TCD MCF_EDMA_CHAN_DSPI1_RX
-+#define DSPI_DMA_TX_TCD MCF_EDMA_CHAN_DSPI1_TX
-+#endif
-+#endif
-+
-+#undef NEW_DMA_METHOD
-+
-+#endif
-+
-+#define DSPI_BITS MCF_DSPI_DCTAR_FMSZ(0xF)
-+#define DSPI_BITS_16 MCF_DSPI_DCTAR_FMSZ(0xF)
-+#define DSPI_BITS_8 MCF_DSPI_DCTAR_FMSZ(0x7)
-+
-+#ifdef NEW_DMA_METHOD
-+#define DSPI_FIFO_SIZE (16)
-+#else
-+#define DSPI_FIFO_SIZE 16
-+#endif
-+
-+#define DRIVER_NAME "Coldfire DSPI"
-+
-+/****************************************************************************/
-+
-+/*
-+ * Local constants and macros
-+ */
-+
-+#define START_STATE ((void *)0)
-+#define RUNNING_STATE ((void *)1)
-+#define DONE_STATE ((void *)2)
-+#define ERROR_STATE ((void *)-1)
-+
-+#define QUEUE_RUNNING 0
-+#define QUEUE_STOPPED 1
-+#define TRAN_STATE_RX_VOID 0x01
-+#define TRAN_STATE_TX_VOID 0x02
-+#define TRAN_STATE_WORD_ODD_NUM 0x04
-+/****************************************************************************/
-+
-+/*
-+ * Local Data Structures
-+ */
-+
-+struct DSPI_MCR {
-+ unsigned master:1;
-+ unsigned cont_scke:1;
-+ unsigned dconf:2;
-+ unsigned frz:1;
-+ unsigned mtfe:1;
-+ unsigned pcsse:1;
-+ unsigned rooe:1;
-+ unsigned pcsis:8;
-+ unsigned reserved15:1;
-+ unsigned mdis:1;
-+ unsigned dis_tx:1;
-+ unsigned dis_rxf:1;
-+ unsigned clr_tx:1;
-+ unsigned clr_rxf:1;
-+ unsigned smpl_pt:2;
-+ unsigned reserved71:7;
-+ unsigned halt:1;
-+};
-+
-+struct DSPI_CTAR {
-+ unsigned dbr:1;
-+ unsigned fmsz:4;
-+ unsigned cpol:1;
-+ unsigned cpha:1;
-+ unsigned lsbfe:1;
-+ unsigned pcssck:2;
-+ unsigned pasc:2;
-+ unsigned pdt:2;
-+ unsigned pbr:2;
-+ unsigned cssck:4;
-+ unsigned asc:4;
-+ unsigned dt:4;
-+ unsigned br:4;
-+};
-+
-+struct chip_data {
-+ /* dspi data */
-+ union {
-+ u32 mcr_val;
-+ struct DSPI_MCR mcr;
-+ };
-+ union {
-+ u32 ctar_val;
-+ struct DSPI_CTAR ctar;
-+ };
-+ u16 void_write_data;
-+};
-+
-+
-+struct driver_data {
-+ /* Driver model hookup */
-+ struct platform_device *pdev;
-+
-+ /* SPI framework hookup */
-+ struct spi_master *master;
-+
-+ /* Driver message queue */
-+ struct workqueue_struct *workqueue;
-+ struct work_struct pump_messages;
-+ spinlock_t lock; /* lock */
-+ struct list_head queue;
-+ int busy;
-+ int run;
-+
-+ /* Message Transfer pump */
-+ struct tasklet_struct pump_transfers;
-+
-+ /* Current message transfer state info */
-+ struct spi_message *cur_msg;
-+ struct spi_transfer *cur_transfer;
-+ struct chip_data *cur_chip;
-+ size_t len;
-+ void *tx;
-+ void *tx_end;
-+ void *rx;
-+ void *rx_end;
-+ char flags;
-+ u8 cs;
-+ u16 void_write_data;
-+ unsigned cs_change:1;
-+
-+ u32 trans_cnt;
-+ u32 wce_cnt;
-+ u32 abrt_cnt;
-+ volatile u32 *mcr; /* DSPI MCR register */
-+ volatile u32 *ctar; /* DSPI CTAR register */
-+ volatile u32 *dspi_dtfr; /* DSPI DTFR register */
-+ volatile u32 *dspi_drfr; /* DSPI DRFR register */
-+ volatile u32 *dspi_rser; /* DSPI RSER register */
-+ volatile u32 *dspi_sr; /* DSPI status register */
-+
-+#if defined(SPI_DSPI_EDMA)
-+ volatile void *edma_tx_buf;
-+ volatile void *edma_rx_buf;
-+ dma_addr_t edma_tx_buf_pa;
-+ dma_addr_t edma_rx_buf_pa;
-+#endif
-+
-+#if defined(CONFIG_M5301x)
-+ u8 *parh;
-+ u8 *parl;
-+#else
-+ u8 *par; /* Pin assignment register */
-+#endif
-+ u8 *int_icr; /* Interrupt level and priority register */
-+ u32 *int_mr; /* Interrupt mask register */
-+ void (*cs_control)(u8 cs, u8 command);
-+};
-+
-+#define DSPI_CS(cs) ((1<<(cs))<<16)
-+
-+/****************************************************************************/
-+
-+/*
-+ * SPI local functions
-+ */
-+
-+static void *next_transfer(struct driver_data *drv_data)
-+{
-+ struct spi_message *msg = drv_data->cur_msg;
-+ struct spi_transfer *trans = drv_data->cur_transfer;
-+
-+ DBG("\n");
-+ /* Move to next transfer */
-+ if (trans->transfer_list.next != &msg->transfers) {
-+ drv_data->cur_transfer = list_entry(trans->transfer_list.next,
-+ struct spi_transfer,
-+ transfer_list);
-+
-+ if (drv_data->cur_transfer->transfer_list.next
-+ == &msg->transfers) /* last transfer */
-+ drv_data->cur_transfer->cs_change = 1;
-+
-+ return RUNNING_STATE;
-+ } else
-+ return DONE_STATE;
-+}
-+
-+
-+static inline int is_word_transfer(struct driver_data *drv_data)
-+{
-+ return ((*(volatile u32 *)(drv_data->ctar+drv_data->cs) & DSPI_BITS_16)
-+ == DSPI_BITS_8) ? 0 : 1;
-+}
-+
-+static inline void set_8bit_transfer_mode(struct driver_data *drv_data)
-+{
-+ DBG("\n");
-+ *(volatile u32 *)(drv_data->ctar+drv_data->cs) =
-+ ((*(volatile u32 *)(drv_data->ctar + drv_data->cs)) & ~DSPI_BITS)
-+ | DSPI_BITS_8;
-+}
-+
-+static inline void set_16bit_transfer_mode(struct driver_data *drv_data)
-+{
-+ DBG("\n");
-+ (*(volatile u32 *)(drv_data->ctar+drv_data->cs)) =
-+ ((*(volatile u32 *)(drv_data->ctar + drv_data->cs)) & ~DSPI_BITS)
-+ | DSPI_BITS_16;
-+}
-+
-+static unsigned char hz_to_spi_baud(int pbr, int dbr, int speed_hz)
-+{
-+ int pbr_tbl[4] = {2, 3, 5, 7}; /* Valid baud rate pre-scaler values */
-+ int brs[16] = { 2, 4, 6, 8,
-+ 16, 32, 64, 128,
-+ 256, 512, 1024, 2048,
-+ 4096, 8192, 16384, 32768 };
-+ int temp, index = 0;
-+
-+ if ((pbr < 0) || (pbr > 3) ||
-+ (dbr < 0) || (dbr > 1))
-+ return 15; /* table indexes out of range, go slow */
-+
-+ temp = ((((MCF_CLK / 2) / pbr_tbl[pbr]) * (1 + dbr)) / speed_hz);
-+
-+ while (temp > brs[index])
-+ if (index++ >= 15)
-+ break;
-+
-+ DBG("baud rate scaler = 0x%x - %d\n", index, brs[index]);
-+ return index;
-+}
-+
-+static int write(struct driver_data *drv_data)
-+{
-+ int tx_count = 0;
-+ int tx_word = is_word_transfer(drv_data);
-+ u16 d16;
-+ u8 d8;
-+ u32 dspi_pushr = 0;
-+ int first = 1;
-+#if defined(SPI_DSPI_EDMA)
-+ volatile u32 *edma_wr = (volatile u32 *)(drv_data->edma_tx_buf);
-+#endif
-+
-+ /* If we are in word mode, but only have a single byte to transfer
-+ * then switch to byte mode temporarily. Will switch back at the
-+ * end of the transfer. */
-+ if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) {
-+ drv_data->flags |= TRAN_STATE_WORD_ODD_NUM;
-+ set_8bit_transfer_mode(drv_data);
-+ tx_word = 0;
-+ }
-+ while ((drv_data->tx < drv_data->tx_end)
-+ && (tx_count < DSPI_FIFO_SIZE)) {
-+ if (tx_word) {
-+ if ((drv_data->tx_end - drv_data->tx) == 1)
-+ break;
-+
-+ if (!(drv_data->flags & TRAN_STATE_TX_VOID))
-+ d16 = *(u16 *)drv_data->tx;
-+ else
-+ d16 = drv_data->void_write_data;
-+
-+ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) |
-+ DSPI_CS(drv_data->cs) |
-+ MCF_DSPI_DTFR_CTAS(drv_data->cs) |
-+ MCF_DSPI_DTFR_CONT;
-+
-+ drv_data->tx += 2;
-+ } else {
-+ if (!(drv_data->flags & TRAN_STATE_TX_VOID))
-+ d8 = *(u8 *)drv_data->tx;
-+ else
-+ d8 = (u8)drv_data->void_write_data;
-+
-+ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) |
-+ DSPI_CS(drv_data->cs) |
-+ MCF_DSPI_DTFR_CTAS(drv_data->cs) |
-+ MCF_DSPI_DTFR_CONT;
-+
-+ drv_data->tx++;
-+ }
-+#ifdef NEW_DMA_METHOD
-+ if ((drv_data->cs_change)
-+ && (drv_data->tx == drv_data->tx_end))
-+ dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
-+#else
-+ if (drv_data->tx == drv_data->tx_end
-+ || tx_count == DSPI_FIFO_SIZE-1) {
-+ /* last transfer in the queue */
-+ dspi_pushr |= MCF_DSPI_DTFR_EOQ;
-+ if ((drv_data->cs_change)
-+ && (drv_data->tx == drv_data->tx_end))
-+ dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
-+#ifdef CONFIG_M547X_8X
-+ /* EOQ gets missed if we don't delay */
-+ udelay(100);
-+#endif
-+ } else if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1))
-+ dspi_pushr |= MCF_DSPI_DTFR_EOQ;
-+#endif
-+#if 1
-+ /*
-+ * we don't need this count in NEW_DMA_METHOD,
-+ * so let is be.(2009-09-11)
-+ */
-+ if (first) {
-+ first = 0;
-+ dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
-+ }
-+#endif
-+#if defined(SPI_DSPI_EDMA)
-+ *(volatile u32 *)edma_wr = dspi_pushr;
-+ edma_wr++;
-+#else
-+ *drv_data->dspi_dtfr = dspi_pushr;
-+#endif
-+ tx_count++;
-+ }
-+
-+#if defined(SPI_DSPI_EDMA)
-+#ifdef NEW_DMA_METHOD
-+
-+ if (tx_count > 0) {
-+ mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD,
-+ /*virt_to_phys((void *)drv_data->edma_tx_buf),*/
-+ (u32)drv_data->edma_tx_buf_pa,
-+ (u32)drv_data->dspi_dtfr,
-+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+ 4, /* soff */
-+ 4, /* nbytes */
-+ 0, /* slast */
-+ tx_count, /* citer */
-+ tx_count, /* biter */
-+ 0, /* doff */
-+ 0, /* dlastsga */
-+ 0, /* major_int */
-+ 1); /* disable_req */
-+
-+ mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD,
-+ (u32)drv_data->dspi_drfr,
-+ /*virt_to_phys((void *)drv_data->edma_rx_buf),*/
-+ (u32)drv_data->edma_rx_buf_pa,
-+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+ 0, /* soff */
-+ 4, /* nbytes */
-+ 0, /* slast */
-+ tx_count, /* citer */
-+ tx_count, /* biter */
-+ 4, /* doff */
-+ 0, /* dlastsga */
-+ 1, /* major_int */
-+ 1); /* disable_req */
-+
-+ mcf_edma_enable_transfer(DSPI_DMA_RX_TCD);
-+ mcf_edma_enable_transfer(DSPI_DMA_TX_TCD);
-+ }
-+#else
-+ if (tx_count > 0) {
-+
-+ mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD,
-+ virt_to_phys((void *)drv_data->edma_tx_buf),
-+ (u32)drv_data->dspi_dtfr,
-+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+ 4, /* soff */
-+ 4 * tx_count, /* nbytes */
-+ 0, /* slast */
-+ 1, /* citer */
-+ 1, /* biter */
-+ 0, /* doff */
-+ 0, /* dlastsga */
-+ 0, /* major_int */
-+ 1); /* disable_req */
-+
-+ mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD,
-+ (u32)drv_data->dspi_drfr,
-+ virt_to_phys((void *)drv_data->edma_rx_buf),
-+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+ 0, /* soff */
-+ 4 * tx_count, /* nbytes */
-+ 0, /* slast */
-+ 1, /* citer */
-+ 1, /* biter */
-+ 4, /* doff */
-+ 0, /* dlastsga */
-+ 0, /* major_int */
-+ 1); /* disable_req */
-+
-+ mcf_edma_start_transfer(DSPI_DMA_TX_TCD);
-+ }
-+#endif
-+#endif
-+ DBG(" send %d[%d]\n", tx_count, tx_count*(tx_word + 1));
-+ return tx_count * (tx_word + 1);
-+}
-+
-+static int read(struct driver_data *drv_data)
-+{
-+ int rx_count = 0;
-+ int rx_word = is_word_transfer(drv_data);
-+ u16 d;
-+#if defined(SPI_DSPI_EDMA)
-+ u32 *rx_edma = (u32 *) drv_data->edma_rx_buf;
-+
-+ /* receive SPI data */
-+ udelay(10);
-+ mcf_edma_start_transfer(DSPI_DMA_RX_TCD);
-+ udelay(10);
-+#endif
-+ while ((drv_data->rx < drv_data->rx_end)
-+ && (rx_count < DSPI_FIFO_SIZE)) {
-+
-+ if (rx_word) {
-+ if ((drv_data->rx_end - drv_data->rx) == 1)
-+ break;
-+#if defined(SPI_DSPI_EDMA)
-+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+ rx_edma++;
-+#else
-+ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
-+#endif
-+ if (!(drv_data->flags & TRAN_STATE_RX_VOID))
-+ *(u16 *)drv_data->rx = d;
-+ drv_data->rx += 2;
-+
-+ } else {
-+#if defined(SPI_DSPI_EDMA)
-+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+ rx_edma++;
-+#else
-+ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
-+#endif
-+ if (!(drv_data->flags & TRAN_STATE_RX_VOID))
-+ *(u8 *)drv_data->rx = d;
-+ drv_data->rx++;
-+ }
-+ rx_count++;
-+ DBG("rxd=0x%x\n", d);
-+ }
-+ return rx_count;
-+}
-+
-+
-+static inline void dspi_setup_chip(struct driver_data *drv_data)
-+{
-+ struct chip_data *chip = drv_data->cur_chip;
-+
-+ DBG("\n");
-+ (*(volatile u32 *)drv_data->mcr) = chip->mcr_val;
-+ (*(volatile u32 *)(drv_data->ctar+drv_data->cs)) = chip->ctar_val;
-+#ifdef NEW_DMA_METHOD
-+ /* enable DSPI DMA request function */
-+ (*(volatile u32 *)drv_data->dspi_rser) = MCF_DSPI_DRSER_TFFFE
-+ | MCF_DSPI_DRSER_TFFFS | MCF_DSPI_DRSER_RFDFE
-+ | MCF_DSPI_DRSER_RFDFS;
-+#else
-+ *drv_data->dspi_rser = MCF_DSPI_DRSER_EOQFE;
-+#endif
-+}
-+
-+#if defined(SPI_DSPI_EDMA)
-+static irqreturn_t edma_tx_handler(int channel, void *dev)
-+{
-+ DBG("\n");
-+ if (channel == DSPI_DMA_TX_TCD)
-+ mcf_edma_stop_transfer(DSPI_DMA_TX_TCD);
-+ return IRQ_HANDLED;
-+}
-+
-+static struct driver_data *dspi_drv_data;
-+
-+static irqreturn_t edma_rx_handler(int channel, void *dev)
-+{
-+ struct driver_data *drv_data = dspi_drv_data;
-+#if 1
-+ int rx_count = 0;
-+ int rx_word = is_word_transfer(drv_data);
-+ u16 d;
-+ volatile u32 *rx_edma = (volatile u32 *) drv_data->edma_rx_buf;
-+ struct spi_message *msg = drv_data->cur_msg;
-+#endif
-+ DBG("\n");
-+ if (channel == DSPI_DMA_RX_TCD) {
-+ mcf_edma_stop_transfer(DSPI_DMA_TX_TCD);
-+ mcf_edma_stop_transfer(DSPI_DMA_RX_TCD);
-+ }
-+
-+#if 1
-+ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) {
-+ while ((drv_data->rx < drv_data->rx_end)
-+ && (rx_count < DSPI_FIFO_SIZE)) {
-+ if (rx_word) {
-+ if ((drv_data->rx_end - drv_data->rx) == 1)
-+ break;
-+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+ rx_edma++;
-+ *(u16 *)drv_data->rx = d;
-+ drv_data->rx += 2;
-+
-+ } else {
-+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+ rx_edma++;
-+ *(u8 *)drv_data->rx = d;
-+ drv_data->rx++;
-+ }
-+ rx_count++;
-+ }
-+ } else { /* rx void by upper */
-+ if ((drv_data->rx_end - drv_data->rx) > DSPI_FIFO_SIZE)
-+ drv_data->rx += DSPI_FIFO_SIZE;
-+ else
-+ drv_data->rx = drv_data->rx_end -
-+ (drv_data->tx_end - drv_data->tx);
-+ }
-+ if (drv_data->rx == drv_data->rx_end) {
-+ /*
-+ * * Finished now - fall through and schedule next
-+ * * transfer tasklet
-+ * */
-+ if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM)
-+ set_16bit_transfer_mode(drv_data);
-+
-+ msg->state = next_transfer(drv_data);
-+ } else {
-+ /* not finished yet - keep going */
-+ msg->actual_length += write(drv_data);
-+
-+ return IRQ_HANDLED;
-+ }
-+
-+#endif
-+ tasklet_schedule(&drv_data->pump_transfers);
-+
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+static irqreturn_t dspi_interrupt(int irq, void *dev_id)
-+{
-+ struct driver_data *drv_data = (struct driver_data *)dev_id;
-+ struct spi_message *msg = drv_data->cur_msg;
-+
-+ /* Clear all flags immediately */
-+ *drv_data->dspi_sr = MCF_DSPI_DSR_EOQF;
-+
-+ if (!drv_data->cur_msg || !drv_data->cur_msg->state) {
-+#if !defined(SPI_DSPI_EDMA)
-+ u32 irq_status = *drv_data->dspi_sr;
-+ /* if eDMA is used it happens some time (at least once)*/
-+ printk(KERN_ERR "Bad message or transfer state handler. \
-+ IRQ status = %x\n", irq_status);
-+#endif
-+ return IRQ_NONE;
-+ }
-+
-+ DBG("\n");
-+ /*
-+ * Read the data into the buffer and reload and start
-+ * queue with new data if not finished. If finished
-+ * then setup the next transfer
-+ */
-+#if defined(SPI_DSPI_EDMA)
-+ mcf_edma_start_transfer(DSPI_DMA_RX_TCD);
-+#endif
-+ read(drv_data);
-+
-+ if (drv_data->rx == drv_data->rx_end) {
-+ /*
-+ * Finished now - fall through and schedule next
-+ * transfer tasklet
-+ */
-+ if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM)
-+ set_16bit_transfer_mode(drv_data);
-+
-+ msg->state = next_transfer(drv_data);
-+ } else {
-+ /* not finished yet - keep going */
-+ msg->actual_length += write(drv_data);
-+ return IRQ_HANDLED;
-+ }
-+
-+ tasklet_schedule(&drv_data->pump_transfers);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/* caller already set message->status; dma and pio irqs are blocked */
-+static void giveback(struct driver_data *drv_data)
-+{
-+ struct spi_transfer *last_transfer;
-+ unsigned long flags;
-+ struct spi_message *msg;
-+ DBG("\n");
-+
-+ spin_lock_irqsave(&drv_data->lock, flags);
-+ msg = drv_data->cur_msg;
-+ drv_data->cur_msg = NULL;
-+ drv_data->cur_transfer = NULL;
-+ drv_data->cur_chip = NULL;
-+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+ last_transfer = list_entry(msg->transfers.prev,
-+ struct spi_transfer, transfer_list);
-+
-+ if (!last_transfer->cs_change)
-+ drv_data->cs_control(drv_data->cs, QSPI_CS_DROP);
-+
-+ msg->state = NULL;
-+ if (msg->complete)
-+ msg->complete(msg->context);
-+}
-+
-+
-+static void pump_transfers(unsigned long data)
-+{
-+ struct driver_data *drv_data = (struct driver_data *)data;
-+ struct spi_message *message = NULL;
-+ struct spi_transfer *transfer = NULL;
-+ struct spi_transfer *previous = NULL;
-+ struct chip_data *chip = NULL;
-+ unsigned long flags;
-+#if 0
-+ int rx_count = 0;
-+ int rx_word = is_word_transfer(drv_data);
-+ u16 d;
-+ volatile u32 *rx_edma = (volatile u32 *) drv_data->edma_rx_buf;
-+ struct spi_message *msg = drv_data->cur_msg;
-+#endif
-+ DBG("\n");
-+
-+#if 0
-+ if (!first_in_transfer) {
-+ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) {
-+ while ((drv_data->rx < drv_data->rx_end)
-+ && (rx_count < DSPI_FIFO_SIZE)) {
-+ if (rx_word) {
-+ if ((drv_data->rx_end - drv_data->rx)
-+ == 1)
-+ break;
-+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+ rx_edma++;
-+ *(u16 *)drv_data->rx = d;
-+ drv_data->rx += 2;
-+
-+ } else {
-+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+ rx_edma++;
-+ *(u8 *)drv_data->rx = d;
-+ drv_data->rx++;
-+ }
-+ rx_count++;
-+ }
-+ } else { /* rx void by upper */
-+ if ((drv_data->rx_end - drv_data->rx) > DSPI_FIFO_SIZE)
-+ drv_data->rx += DSPI_FIFO_SIZE;
-+ else
-+ drv_data->rx = drv_data->rx_end -
-+ (drv_data->tx_end - drv_data->tx);
-+ }
-+ if (drv_data->rx == drv_data->rx_end) {
-+ /*
-+ * * Finished now - fall through and schedule next
-+ * * transfer tasklet
-+ * */
-+ if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM)
-+ set_16bit_transfer_mode(drv_data);
-+
-+ msg->state = next_transfer(drv_data);
-+ } else {
-+ /* not finished yet - keep going */
-+ local_irq_save(flags);
-+ msg->actual_length += write(drv_data);
-+ local_irq_restore(flags);
-+ return;
-+ }
-+ } else {
-+ first_in_transfer = 0;
-+ }
-+#endif
-+
-+
-+ /* Get current state information */
-+ message = drv_data->cur_msg;
-+ transfer = drv_data->cur_transfer;
-+ chip = drv_data->cur_chip;
-+
-+ /* Handle for abort */
-+ if (message->state == ERROR_STATE) {
-+ message->status = -EIO;
-+ giveback(drv_data);
-+ return;
-+ }
-+
-+ /* Handle end of message */
-+ if (message->state == DONE_STATE) {
-+ message->status = 0;
-+ giveback(drv_data);
-+ return;
-+ }
-+#if 1
-+ drv_data->cs = message->spi->chip_select;
-+ drv_data->cs_change = transfer->cs_change;
-+ drv_data->void_write_data = chip->void_write_data;
-+#endif
-+
-+ if (message->state == START_STATE) {
-+#if 0
-+ drv_data->cs = message->spi->chip_select;
-+ drv_data->cs_change = transfer->cs_change;
-+ drv_data->void_write_data = chip->void_write_data;
-+#endif
-+
-+ dspi_setup_chip(drv_data);
-+
-+ if (drv_data->cs_control)
-+ drv_data->cs_control(message->spi->chip_select,
-+ QSPI_CS_ASSERT);
-+ }
-+
-+ /* Delay if requested at end of transfer*/
-+ if (message->state == RUNNING_STATE) {
-+ previous = list_entry(transfer->transfer_list.prev,
-+ struct spi_transfer,
-+ transfer_list);
-+
-+ if (drv_data->cs_control && transfer->cs_change)
-+ drv_data->cs_control(message->spi->chip_select,
-+ QSPI_CS_DROP);
-+
-+ if (previous->delay_usecs)
-+ udelay(previous->delay_usecs);
-+
-+ if (drv_data->cs_control && transfer->cs_change)
-+ drv_data->cs_control(message->spi->chip_select,
-+ QSPI_CS_ASSERT);
-+ }
-+
-+ drv_data->flags = 0;
-+ drv_data->tx = (void *)transfer->tx_buf;
-+ drv_data->tx_end = drv_data->tx + transfer->len;
-+ drv_data->rx = transfer->rx_buf;
-+ drv_data->rx_end = drv_data->rx + transfer->len;
-+
-+ if (!drv_data->rx)
-+ drv_data->flags |= TRAN_STATE_RX_VOID;
-+
-+ if (!drv_data->tx)
-+ drv_data->flags |= TRAN_STATE_TX_VOID;
-+
-+#if 0
-+ drv_data->cs = message->spi->chip_select;
-+ drv_data->cs_change = transfer->cs_change;
-+ drv_data->void_write_data = chip->void_write_data;
-+#endif
-+ if (transfer->speed_hz) {
-+ *(drv_data->ctar + drv_data->cs) = \
-+ ((chip->ctar_val & ~0xF) | \
-+ hz_to_spi_baud(chip->ctar.pbr, \
-+ chip->ctar.dbr, \
-+ transfer->speed_hz));
-+ }
-+
-+ message->state = RUNNING_STATE;
-+
-+ /* Go baby, go */
-+ local_irq_save(flags);
-+ message->actual_length += write(drv_data);
-+ local_irq_restore(flags);
-+}
-+
-+
-+static void pump_messages(struct work_struct *work)
-+{
-+ struct driver_data *drv_data;
-+ unsigned long flags;
-+ DBG("\n");
-+
-+ drv_data = container_of(work, struct driver_data, pump_messages);
-+
-+ /* Lock queue and check for queue work */
-+ spin_lock_irqsave(&drv_data->lock, flags);
-+ if (list_empty(&drv_data->queue)
-+ || drv_data->run == QUEUE_STOPPED) {
-+ drv_data->busy = 0;
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+ return;
-+ }
-+
-+ /* Make sure we are not already running a message */
-+ if (drv_data->cur_msg) {
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+ return;
-+ }
-+
-+ /* Extract head of queue */
-+ drv_data->cur_msg = list_entry(drv_data->queue.next,
-+ struct spi_message, queue);
-+ list_del_init(&drv_data->cur_msg->queue);
-+
-+ /* Initial message state*/
-+ drv_data->cur_msg->state = START_STATE;
-+ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
-+ struct spi_transfer,
-+ transfer_list);
-+
-+ if (drv_data->cur_transfer->transfer_list.next
-+ == &drv_data->cur_msg->transfers)
-+ drv_data->cur_transfer->cs_change = 1; /* last */
-+
-+#ifdef NEW_DMA_METHOD
-+ mcf_edma_stop_transfer(DSPI_DMA_TX_TCD);
-+ mcf_edma_stop_transfer(DSPI_DMA_RX_TCD);
-+ first_in_transfer = 1;
-+#endif
-+ /* Setup the SPI Registers using the per chip configuration */
-+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-+
-+ /* Mark as busy and launch transfers */
-+ tasklet_schedule(&drv_data->pump_transfers);
-+
-+ drv_data->busy = 1;
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+}
-+
-+/****************************************************************************/
-+
-+/*
-+ * SPI master implementation
-+ */
-+
-+static int transfer(struct spi_device *spi, struct spi_message *msg)
-+{
-+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-+ unsigned long flags;
-+
-+ DBG("\n");
-+ spin_lock_irqsave(&drv_data->lock, flags);
-+
-+ if (drv_data->run == QUEUE_STOPPED) {
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+ return -ESHUTDOWN;
-+ }
-+
-+ msg->actual_length = 0;
-+ msg->status = -EINPROGRESS;
-+ msg->state = START_STATE;
-+
-+ list_add_tail(&msg->queue, &drv_data->queue);
-+
-+ if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
-+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+ return 0;
-+}
-+
-+
-+static int setup(struct spi_device *spi)
-+{
-+ struct chip_data *chip;
-+ struct coldfire_dspi_chip *chip_info
-+ = (struct coldfire_dspi_chip *)spi->controller_data;
-+ DBG("\n");
-+
-+ /* Only alloc on first setup */
-+ chip = spi_get_ctldata(spi);
-+ if (chip == NULL) {
-+ chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
-+ if (!chip)
-+ return -ENOMEM;
-+ spi->mode = chip_info->mode;
-+ spi->bits_per_word = chip_info->bits_per_word;
-+ }
-+
-+ chip->mcr.master = 1;
-+ chip->mcr.cont_scke = 0;
-+ chip->mcr.dconf = 0;
-+ chip->mcr.frz = 0;
-+ chip->mcr.mtfe = 0;
-+ chip->mcr.pcsse = 0;
-+ chip->mcr.rooe = 0;
-+ chip->mcr.pcsis = 0xFF;
-+ chip->mcr.reserved15 = 0;
-+ chip->mcr.mdis = 0;
-+ chip->mcr.dis_tx = 0;
-+ chip->mcr.dis_rxf = 0;
-+ chip->mcr.clr_tx = 1;
-+ chip->mcr.clr_rxf = 1;
-+ chip->mcr.smpl_pt = 0;
-+ chip->mcr.reserved71 = 0;
-+ chip->mcr.halt = 0;
-+
-+ if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
-+ chip->ctar.fmsz = spi->bits_per_word-1;
-+ } else {
-+ printk(KERN_ERR "Invalid wordsize\n");
-+ kfree(chip);
-+ return -ENODEV;
-+ }
-+
-+ chip->void_write_data = chip_info->void_write_data;
-+
-+ if (spi->max_speed_hz != 0)
-+ chip_info->br = hz_to_spi_baud(chip_info->pbr, chip_info->dbr, \
-+ spi->max_speed_hz);
-+
-+ chip->ctar.cpha = (spi->mode & SPI_CPHA) ? 1 : 0;
-+ chip->ctar.cpol = (spi->mode & SPI_CPOL) ? 1 : 0;
-+ chip->ctar.lsbfe = (spi->mode & SPI_LSB_FIRST) ? 1 : 0;
-+ chip->ctar.dbr = chip_info->dbr;
-+ chip->ctar.pbr = chip_info->pbr;
-+ chip->ctar.br = chip_info->br;
-+ chip->ctar.pcssck = chip_info->pcssck;
-+ chip->ctar.pasc = chip_info->pasc;
-+ chip->ctar.pdt = chip_info->pdt;
-+ chip->ctar.cssck = chip_info->cssck;
-+ chip->ctar.asc = chip_info->asc;
-+ chip->ctar.dt = chip_info->dt;
-+
-+ spi_set_ctldata(spi, chip);
-+
-+ return 0;
-+}
-+
-+static int init_queue(struct driver_data *drv_data)
-+{
-+ INIT_LIST_HEAD(&drv_data->queue);
-+ spin_lock_init(&drv_data->lock);
-+
-+ drv_data->run = QUEUE_STOPPED;
-+ drv_data->busy = 0;
-+
-+ tasklet_init(&drv_data->pump_transfers,
-+ pump_transfers, (unsigned long)drv_data);
-+
-+ INIT_WORK(&drv_data->pump_messages, pump_messages);
-+
-+ drv_data->workqueue = create_singlethread_workqueue(
-+ dev_name(drv_data->master->dev.parent));
-+ if (drv_data->workqueue == NULL)
-+ return -EBUSY;
-+
-+ return 0;
-+}
-+
-+static int start_queue(struct driver_data *drv_data)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&drv_data->lock, flags);
-+
-+ if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+ return -EBUSY;
-+ }
-+
-+ drv_data->run = QUEUE_RUNNING;
-+ drv_data->cur_msg = NULL;
-+ drv_data->cur_transfer = NULL;
-+ drv_data->cur_chip = NULL;
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+
-+ return 0;
-+}
-+
-+static int stop_queue(struct driver_data *drv_data)
-+{
-+ unsigned long flags;
-+ unsigned limit = 500;
-+ int status = 0;
-+
-+ spin_lock_irqsave(&drv_data->lock, flags);
-+
-+ /* This is a bit lame, but is optimized for the common execution path.
-+ * A wait_queue on the drv_data->busy could be used, but then the common
-+ * execution path (pump_messages) would be required to call wake_up or
-+ * friends on every SPI message. Do this instead */
-+ drv_data->run = QUEUE_STOPPED;
-+ while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+ msleep(20);
-+ spin_lock_irqsave(&drv_data->lock, flags);
-+ }
-+
-+ if (!list_empty(&drv_data->queue) || drv_data->busy)
-+ status = -EBUSY;
-+
-+ spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+ return status;
-+}
-+
-+static int destroy_queue(struct driver_data *drv_data)
-+{
-+ int status;
-+
-+ status = stop_queue(drv_data);
-+ if (status != 0)
-+ return status;
-+
-+ destroy_workqueue(drv_data->workqueue);
-+
-+ return 0;
-+}
-+
-+
-+static void cleanup(struct spi_device *spi)
-+{
-+ struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
-+
-+ dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
-+ spi->master->bus_num, spi->chip_select);
-+
-+ kfree(chip);
-+}
-+
-+
-+/****************************************************************************/
-+
-+/*
-+ * Generic Device driver routines and interface implementation
-+ */
-+
-+static int coldfire_spi_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct coldfire_spi_master *platform_info;
-+ struct spi_master *master;
-+ struct driver_data *drv_data = 0;
-+ struct resource *memory_resource;
-+ int irq;
-+ int status = 0;
-+ int i;
-+
-+ platform_info = (struct coldfire_spi_master *)dev->platform_data;
-+
-+ master = spi_alloc_master(dev, sizeof(struct driver_data));
-+ if (!master)
-+ return -ENOMEM;
-+
-+ drv_data = spi_master_get_devdata(master);
-+ drv_data->master = master;
-+
-+ INIT_LIST_HEAD(&drv_data->queue);
-+ spin_lock_init(&drv_data->lock);
-+
-+ master->bus_num = platform_info->bus_num;
-+ master->num_chipselect = platform_info->num_chipselect;
-+ master->cleanup = cleanup;
-+ master->setup = setup;
-+ master->transfer = transfer;
-+
-+ drv_data->cs_control = platform_info->cs_control;
-+ if (drv_data->cs_control)
-+ for (i = 0; i < master->num_chipselect; i++)
-+ drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP);
-+
-+ /* Setup register addresses */
-+ memory_resource = platform_get_resource_byname(pdev,
-+ IORESOURCE_MEM, "spi-module");
-+ if (!memory_resource) {
-+ dev_dbg(dev, "can not find platform module memory\n");
-+ goto out_error_master_alloc;
-+ }
-+
-+#if defined(SPI_DSPI_EDMA)
-+ drv_data->edma_tx_buf = (volatile void *)dma_alloc_coherent(NULL,
-+ EDMA_BUFSIZE_KMALLOC,
-+ &drv_data->edma_tx_buf_pa,
-+ GFP_DMA);
-+ if (!drv_data->edma_tx_buf) {
-+ dev_dbg(dev, "cannot allocate eDMA TX memory\n");
-+ goto out_error_master_alloc;
-+ }
-+ drv_data->edma_rx_buf = (volatile void *)dma_alloc_coherent(NULL,
-+ EDMA_BUFSIZE_KMALLOC,
-+ &drv_data->edma_rx_buf_pa,
-+ GFP_DMA);
-+ if (!drv_data->edma_rx_buf) {
-+ dma_free_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
-+ (void *)drv_data->edma_tx_buf,
-+ drv_data->edma_tx_buf_pa);
-+ dev_dbg(dev, "cannot allocate eDMA RX memory\n");
-+ goto out_error_master_alloc;
-+ }
-+ printk(KERN_INFO "Coldfire DSPI DMA addr: Tx-0x%p[0x%x],"
-+ " Rx-0x%p[0x%x]\n",
-+ drv_data->edma_tx_buf, drv_data->edma_tx_buf_pa,
-+ drv_data->edma_rx_buf, drv_data->edma_rx_buf_pa);
-+#endif
-+#if defined(CONFIG_DSPI0)
-+ drv_data->mcr = (volatile u32 *)&MCF_DSPI_DMCR;
-+ drv_data->ctar = (volatile u32 *)&MCF_DSPI_DCTAR0;
-+ drv_data->dspi_sr = (volatile u32 *)&MCF_DSPI_DSR;
-+ drv_data->dspi_rser = (volatile u32 *)&MCF_DSPI_DRSER;
-+ drv_data->dspi_dtfr = (volatile u32 *)&MCF_DSPI_DTFR;
-+ drv_data->dspi_drfr = (volatile u32 *)&MCF_DSPI_DRFR;
-+#elif defined(CONFIG_DSPI1)
-+ drv_data->mcr = (volatile u32 *)&MCF_DSPI1_DMCR;
-+ drv_data->ctar = (volatile u32 *)&MCF_DSPI1_DCTAR0;
-+ drv_data->dspi_sr = (volatile u32 *)&MCF_DSPI1_DSR;
-+ drv_data->dspi_rser = (volatile u32 *)&MCF_DSPI1_DRSER;
-+ drv_data->dspi_dtfr = (volatile u32 *)&MCF_DSPI1_DTFR;
-+ drv_data->dspi_drfr = (volatile u32 *)&MCF_DSPI1_DRFR;
-+#else
-+ drv_data->mcr = (volatile u32 *)&MCF_DSPI_DMCR;
-+ drv_data->ctar = (volatile u32 *)&MCF_DSPI_DCTAR0;
-+ drv_data->dspi_sr = (volatile u32 *)&MCF_DSPI_DSR;
-+ drv_data->dspi_rser = (volatile u32 *)&MCF_DSPI_DRSER;
-+ drv_data->dspi_dtfr = (volatile u32 *)&MCF_DSPI_DTFR;
-+ drv_data->dspi_drfr = (volatile u32 *)&MCF_DSPI_DRFR;
-+#endif
-+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "spi-par");
-+ if (!memory_resource) {
-+ dev_dbg(dev, "No spi-par memory\n");
-+ goto out_error_master_alloc;
-+ }
-+#ifdef CONFIG_M5301x
-+ drv_data->parh = (void *)memory_resource->start;
-+ drv_data->parl = (void *)memory_resource->end;
-+#elif defined(CONFIG_M5441X)
-+ /* This configuration has been set at arch scource*/
-+#else
-+ drv_data->par = (void *)memory_resource->start;
-+#endif
-+
-+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "spi-int-level");
-+ if (!memory_resource) {
-+ dev_dbg(dev, "No spi-int-level memory\n");
-+ goto out_error_master_alloc;
-+ }
-+ drv_data->int_icr = (void *)memory_resource->start;
-+
-+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "spi-int-mask");
-+ if (!memory_resource) {
-+ dev_dbg(dev, "No spi-int-mask memory\n");
-+ goto out_error_master_alloc;
-+ }
-+ drv_data->int_mr = (void *)memory_resource->start;
-+#ifndef NEW_DMA_METHOD
-+ /*
-+ * PIO mode
-+ */
-+ if (platform_info->irq_list) {
-+ /* multiple IRQs */
-+ int *irqlist = platform_info->irq_list;
-+ while ((irq = *irqlist++)) {
-+ int off = *irqlist++;
-+ int lvl = *irqlist++;
-+ int msk = *irqlist++;
-+ status = request_irq(irq, dspi_interrupt, IRQF_DISABLED,
-+ pdev->name, drv_data);
-+ if (status < 0) {
-+ dev_err(&pdev->dev,
-+ "Unable to attach ColdFire DSPI interrupt\n");
-+ goto out_error_master_alloc;
-+ }
-+
-+ if (lvl)
-+ *(drv_data->int_icr + off) = lvl;
-+
-+ if (msk)
-+ *drv_data->int_mr &= ~msk;
-+ }
-+ } else {
-+ irq = platform_info->irq_vector;
-+
-+ status = request_irq(platform_info->irq_vector, dspi_interrupt,
-+ IRQF_DISABLED, pdev->name, drv_data);
-+ if (status < 0) {
-+ dev_err(&pdev->dev,
-+ "Unable to attach ColdFire DSPI interrupt\n");
-+ goto out_error_master_alloc;
-+ }
-+
-+ *drv_data->int_icr = platform_info->irq_lp;
-+ *drv_data->int_mr &= ~platform_info->irq_mask;
-+ }
-+#endif
-+ /* Now that we have all the addresses etc. Let's set it up */
-+#ifdef CONFIG_M5301x
-+ *drv_data->parh = (u8) (platform_info->par_val16 >> 8);
-+ *drv_data->parl = (u8) (platform_info->par_val16 & 0xff);
-+#elif defined(CONFIG_M5441X)
-+ /* This configuration has been set at arch source */
-+#else
-+ *drv_data->par = platform_info->par_val;
-+#endif
-+
-+ /* Initial and start queue */
-+ status = init_queue(drv_data);
-+ if (status != 0) {
-+ dev_err(&pdev->dev, "Problem initializing DSPI queue\n");
-+ goto out_error_irq_alloc;
-+ }
-+ status = start_queue(drv_data);
-+ if (status != 0) {
-+ dev_err(&pdev->dev, "Problem starting DSPI queue\n");
-+ goto out_error_irq_alloc;
-+ }
-+
-+#if defined(SPI_DSPI_EDMA)
-+ DBG("MCF edma request channel for SPI\n");
-+
-+ if (mcf_edma_request_channel(DSPI_DMA_TX_TCD,
-+ edma_tx_handler,
-+ NULL,
-+ 0x00,
-+ pdev,
-+ NULL, /* spinlock */
-+ DRIVER_NAME) < 0){
-+ dev_err(&pdev->dev, "eDMA transmit channel request\n");
-+ status = -EINVAL;
-+ goto out_error_queue_alloc;
-+ }
-+/*
-+ * we only need RX eDMA interrupt to sync a spi transfer,
-+ * the Tx eDMA interrupt can be ignored, this is determined
-+ * by SPI communicate machnisim, i.e, is half duplex mode, that is
-+ * whether read or write, we need write data out to get we wanted.
-+ */
-+ if (mcf_edma_request_channel(DSPI_DMA_RX_TCD,
-+ edma_rx_handler,
-+ NULL,
-+ 0x06,
-+ pdev,
-+ NULL, /* spinlock */
-+ DRIVER_NAME) < 0){
-+ dev_err(&pdev->dev, "eDAM receive channel request\n");
-+ status = -EINVAL;
-+ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
-+ goto out_error_queue_alloc;
-+ }
-+
-+ dspi_drv_data = drv_data;
-+#endif
-+
-+ /* Register with the SPI framework */
-+ platform_set_drvdata(pdev, drv_data);
-+ status = spi_register_master(master);
-+ if (status != 0) {
-+ dev_err(&pdev->dev, "Problem registering DSPI master\n");
-+ status = -EINVAL;
-+ goto out_error_queue_alloc;
-+ }
-+
-+#ifdef NEW_DMA_METHOD
-+ printk(KERN_INFO "Coldfire DSPI: Using Highspeed eDMA transfer method!\n");
-+#endif
-+ printk(KERN_INFO "DSPI: Coldfire master initialized\n");
-+ return status;
-+
-+out_error_queue_alloc:
-+ destroy_queue(drv_data);
-+
-+out_error_irq_alloc:
-+ free_irq(platform_info->irq_vector, drv_data);
-+
-+out_error_master_alloc:
-+ spi_master_put(master);
-+ return status;
-+
-+}
-+
-+static int coldfire_spi_remove(struct platform_device *pdev)
-+{
-+ struct driver_data *drv_data = platform_get_drvdata(pdev);
-+ int irq;
-+ int status = 0;
-+
-+ if (!drv_data)
-+ return 0;
-+
-+#if defined(SPI_DSPI_EDMA)
-+ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
-+ mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev);
-+#endif
-+
-+ /* Remove the queue */
-+ status = destroy_queue(drv_data);
-+ if (status != 0)
-+ return status;
-+
-+ /* Release IRQ */
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq >= 0)
-+ free_irq(irq, drv_data);
-+
-+ /* Disconnect from the SPI framework */
-+ spi_unregister_master(drv_data->master);
-+
-+ /* Prevent double remove */
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static void coldfire_spi_shutdown(struct platform_device *pdev)
-+{
-+ int status = coldfire_spi_remove(pdev);
-+
-+ if (status != 0)
-+ dev_err(&pdev->dev, "shutdown failed with %d\n", status);
-+}
-+
-+
-+#ifdef CONFIG_PM
-+static int suspend_devices(struct device *dev, void *pm_message)
-+{
-+ pm_message_t *state = pm_message;
-+
-+ if (dev->power.power_state.event != state->event) {
-+ dev_warn(dev, "pm state does not match request\n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+static int coldfire_spi_suspend(struct platform_device *pdev,
-+ pm_message_t state)
-+{
-+ struct driver_data *drv_data = platform_get_drvdata(pdev);
-+ int status = 0;
-+
-+ /* Check all childern for current power state */
-+ if (device_for_each_child(&pdev->dev,
-+ &state, suspend_devices) != 0) {
-+ dev_warn(&pdev->dev, "suspend aborted\n");
-+ return -1;
-+ }
-+
-+ status = stop_queue(drv_data);
-+ if (status != 0)
-+ return status;
-+
-+ return 0;
-+}
-+
-+static int coldfire_spi_resume(struct platform_device *pdev)
-+{
-+ struct driver_data *drv_data = platform_get_drvdata(pdev);
-+ int status = 0;
-+
-+ /* Start the queue running */
-+ status = start_queue(drv_data);
-+ if (status != 0) {
-+ dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
-+ return status;
-+ }
-+
-+ return 0;
-+}
-+#else
-+#define coldfire_spi_suspend NULL
-+#define coldfire_spi_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static struct platform_driver driver = {
-+ .driver = {
-+ .name = "spi_coldfire",
-+ .bus = &platform_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = coldfire_spi_probe,
-+ .remove = __devexit_p(coldfire_spi_remove),
-+ .shutdown = coldfire_spi_shutdown,
-+ .suspend = coldfire_spi_suspend,
-+ .resume = coldfire_spi_resume,
-+};
-+
-+static int __init coldfire_spi_init(void)
-+{
-+ platform_driver_register(&driver);
-+
-+ return 0;
-+}
-+module_init(coldfire_spi_init);
-+
-+static void __exit coldfire_spi_exit(void)
-+{
-+ platform_driver_unregister(&driver);
-+}
-+module_exit(coldfire_spi_exit);
-+
-+MODULE_AUTHOR("Matt Waddel");
-+MODULE_DESCRIPTION("ColdFire DSPI Contoller");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/coldfire/patches/009-Add-ALSA-driver-for-MCF5445x.patch b/target/linux/coldfire/patches/009-Add-ALSA-driver-for-MCF5445x.patch
deleted file mode 100644
index 52c1f56..0000000
--- a/target/linux/coldfire/patches/009-Add-ALSA-driver-for-MCF5445x.patch
+++ /dev/null
@@ -1,1869 +0,0 @@
-From d37d2d880efdc0ce515df4155ddafef3835d1b7f Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:41 +0800
-Subject: [PATCH 09/52] Add ALSA driver for MCF5445x
-
-Add ALSA driver for MCF54451 and MCF54455.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- sound/Kconfig | 6 +-
- sound/Makefile | 1 +
- sound/coldfire/Kconfig | 14 +
- sound/coldfire/Makefile | 6 +
- sound/coldfire/coldfire-codec-spi.c | 93 ++
- sound/coldfire/snd-coldfire.c | 1664 +++++++++++++++++++++++++++++++++++
- sound/coldfire/snd-coldfire.h | 15 +
- 7 files changed, 1795 insertions(+), 4 deletions(-)
- create mode 100644 sound/coldfire/Kconfig
- create mode 100644 sound/coldfire/Makefile
- create mode 100644 sound/coldfire/coldfire-codec-spi.c
- create mode 100644 sound/coldfire/snd-coldfire.c
- create mode 100644 sound/coldfire/snd-coldfire.h
-
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -59,8 +59,6 @@ config SOUND_OSS_CORE_PRECLAIM
-
- source "sound/oss/dmasound/Kconfig"
-
--if !M68K
--
- menuconfig SND
- tristate "Advanced Linux Sound Architecture"
- help
-@@ -85,6 +83,8 @@ source "sound/aoa/Kconfig"
-
- source "sound/arm/Kconfig"
-
-+source "sound/coldfire/Kconfig"
-+
- source "sound/atmel/Kconfig"
-
- source "sound/spi/Kconfig"
-@@ -121,8 +121,6 @@ source "sound/oss/Kconfig"
-
- endif # SOUND_PRIME
-
--endif # !M68K
--
- endif # SOUND
-
- # AC97_BUS is used from both sound and ucb1400
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/
- obj-$(CONFIG_SND_AOA) += aoa/
-+obj-$(CONFIG_SND_COLDFIRE) += coldfire/
-
- # This one must be compilable even if sound is configured out
- obj-$(CONFIG_AC97_BUS) += ac97_bus.o
---- /dev/null
-+++ b/sound/coldfire/Kconfig
-@@ -0,0 +1,14 @@
-+
-+menu "ALSA for Coldfire"
-+
-+config SND_COLDFIRE
-+ bool "Coldfire sound devices"
-+ depends on SND
-+ select SND_PCM
-+ select SSIAUDIO_USE_EDMA
-+ default y
-+ help
-+ Support for sound devices specific to Coldfire architectures.
-+
-+endmenu
-+
---- /dev/null
-+++ b/sound/coldfire/Makefile
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for Coldfire ALSA
-+#
-+
-+obj-y += snd-coldfire.o coldfire-codec-spi.o
-+
---- /dev/null
-+++ b/sound/coldfire/coldfire-codec-spi.c
-@@ -0,0 +1,93 @@
-+/*
-+ * linux/sound/coldfire/coldfire-codec-spi.c
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * Simple SPI interface for the CODEC.
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/spi/spi.h>
-+#include <linux/kernel.h>
-+#include <asm/mcfsim.h>
-+#include <asm/coldfire.h>
-+#include <linux/delay.h>
-+
-+#define MCF_CODEC_SPI_DRIVER_NAME "mcf_codec_spi"
-+
-+static struct spi_device *mcf_codec_spi;
-+
-+/*
-+ * Write CODEC register via SPI
-+ */
-+int mcf_codec_spi_write(u8 addr, u16 data)
-+{
-+ u16 spi_word;
-+
-+ if (mcf_codec_spi == NULL)
-+ return -ENODEV;
-+
-+ spi_word = ((addr & 0x7F)<<9)|(data & 0x1FF);
-+ return spi_write(mcf_codec_spi, (const u8 *)&spi_word,
-+ sizeof(spi_word));
-+}
-+EXPORT_SYMBOL(mcf_codec_spi_write);
-+
-+static int __devinit mcf_codec_spi_probe(struct spi_device *spi)
-+{
-+ spi->dev.power.power_state = PMSG_ON;
-+ mcf_codec_spi = spi;
-+
-+ return 0;
-+}
-+
-+static int __devexit mcf_codec_spi_remove(struct spi_device *spi)
-+{
-+ return 0;
-+}
-+
-+static int mcf_codec_spi_suspend(struct spi_device *spi, pm_message_t message)
-+{
-+ return 0;
-+}
-+
-+static int mcf_codec_spi_resume(struct spi_device *spi)
-+{
-+ return 0;
-+}
-+
-+static struct spi_driver mcf_codec_spi_driver = {
-+ .driver = {
-+ .name = MCF_CODEC_SPI_DRIVER_NAME,
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = mcf_codec_spi_probe,
-+ .remove = __devexit_p(mcf_codec_spi_remove),
-+ .suspend = mcf_codec_spi_suspend,
-+ .resume = mcf_codec_spi_resume,
-+};
-+
-+static int __init mcf_codec_spi_init(void)
-+{
-+ return spi_register_driver(&mcf_codec_spi_driver);
-+}
-+module_init(mcf_codec_spi_init);
-+
-+static void __exit mcf_codec_spi_exit(void)
-+{
-+ spi_unregister_driver(&mcf_codec_spi_driver);
-+}
-+module_exit(mcf_codec_spi_exit);
-+
-+
-+MODULE_DESCRIPTION("Coldfire Codec SPI driver");
-+MODULE_AUTHOR("Kurt Mahan, Freescale Semiconductor, Inc.");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/coldfire/snd-coldfire.c
-@@ -0,0 +1,1664 @@
-+/*
-+ * linux/sound/coldfire/snd-coldfire.c
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: York Sun <r58495@freescale.com>
-+ * Alison Wang <b18965@freescale.com>
-+ *
-+ * Coldfire ALSA driver based on SSI and TLV320A
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ ***************************************************************************
-+ *
-+ * NOTE: This driver was tested on MCF5445x, MCF5301x, MCF5227x, MCF532x and
-+ * MCF537x platforms.
-+ * */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/slab.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/ioctl.h>
-+#include <linux/soundcard.h>
-+#include <linux/spi/spi.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/control.h>
-+#include <linux/fs.h>
-+#include <linux/delay.h>
-+
-+#include <asm/mcfsim.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcf_edma.h>
-+#include "snd-coldfire.h"
-+
-+#if defined(CONFIG_M5445X)
-+#include <asm/mcf5445x_ssi.h>
-+#endif
-+
-+#define CF_ALSA_DEBUG 0
-+#if CF_ALSA_DEBUG
-+#define DBG(fmt, args...) printk(KERN_INFO "[%s] " fmt , \
-+ __func__, ## args)
-+#else
-+#define DBG(fmt, args...) do {} while (0)
-+#endif
-+
-+#define SOUND_CARD_NAME "Coldfire ALSA"
-+#define MAX_BUFFER_SIZE (32*1024)
-+
-+/* eDMA channel for SSI channel 0,1 TX,RX */
-+#define DMA_TX_TCD0 MCF_EDMA_CHAN_TIMER2
-+#define DMA_TX_TCD1 MCF_EDMA_CHAN_TIMER3
-+#define DMA_RX_TCD0 MCF_EDMA_CHAN_TIMER0
-+#define DMA_RX_TCD1 MCF_EDMA_CHAN_TIMER1
-+
-+#define CODEC_LEFT_IN_REG (0x00)
-+#define CODEC_RIGHT_IN_REG (0x01)
-+#define CODEC_LEFT_HP_VOL_REG (0x02)
-+#define CODEC_RIGHT_HP_VOL_REG (0x03)
-+#define CODEC_ANALOG_APATH_REG (0x04)
-+#define CODEC_DIGITAL_APATH_REG (0x05)
-+#define CODEC_POWER_DOWN_REG (0x06)
-+#define CODEC_DIGITAL_IF_FMT_REG (0x07)
-+#define CODEC_SAMPLE_RATE_REG (0x08)
-+#define CODEC_DIGITAL_IF_ACT_REG (0x09)
-+#define CODEC_RESET_REG (0x0f)
-+
-+#define TLV320AIC23_CODEC_SAMPLE_RATE_REG (0x08)
-+#define TLV320AIC23_CODEC_SAMPLERATE_REG_8KHZ (0x0C)
-+#define TLV320AIC23_CODEC_SAMPLERATE_REG_11KHZ (0x0C)
-+#define TLV320AIC23_CODEC_SAMPLERATE_REG_16KHZ (0x58)
-+#define TLV320AIC23_CODEC_SAMPLERATE_REG_22KHZ (0x62)
-+#define TLV320AIC23_CODEC_SAMPLERATE_REG_44KHZ (0x22)
-+#define TLV320AIC23_CODEC_SAMPLERATE_REG_48KHZ (0x00)
-+
-+#define MCF_SSI_AUDIO_IRQ_LEVEL (5)
-+#define TLV320A_VOL_MAX 0x07F
-+#define TLV320A_VOL_MIN 0x030
-+#define TLV320A_VOL_INIT 0x065
-+#define TLV320A_LINEIN_MAX 0x1F
-+#define TLV320A_LINEIN_INIT 0x17
-+#define TLV320A_ANALOGPATH_INIT 0x11
-+
-+/* Codec settings */
-+#define MCF_SSI_AUDIO_MCLK_1 (12288000U) /*Hz*/
-+#define MCF_SSI_AUDIO_MCLK_2 (16934400U) /*Hz*/
-+#define MCF_SSI_AUDIO_MCLK_3 (14112000U) /*Hz*/
-+#define MCF_SSI_AUDIO_MCLK_4 (18432000U) /*Hz*/
-+
-+#define MCF_SSI_AUDIO_SSDIV_VALUE_1 \
-+ ((((u32)MCF_CLK*2)/MCF_SSI_AUDIO_MCLK_1)+ \
-+ (((((u32)MCF_CLK*2*10)/MCF_SSI_AUDIO_MCLK_1)%10) > 5))
-+
-+#define MCF_SSI_AUDIO_SSDIV_VALUE_2 \
-+ ((((u32)MCF_CLK*2)/MCF_SSI_AUDIO_MCLK_2)+ \
-+ (((((u32)MCF_CLK*2*10)/MCF_SSI_AUDIO_MCLK_2)%10) > 5))
-+
-+#define MCF_SSI_AUDIO_SSDIV_VALUE_3 \
-+ ((((u32)MCF_CLK*2)/MCF_SSI_AUDIO_MCLK_3)+ \
-+ (((((u32)MCF_CLK*2*10)/MCF_SSI_AUDIO_MCLK_3)%10) > 5))
-+
-+#define MCF_SSI_AUDIO_SSDIV_VALUE_4 \
-+ ((((u32)MCF_CLK*2)/MCF_SSI_AUDIO_MCLK_4)+ \
-+ (((((u32)MCF_CLK*2*10)/MCF_SSI_AUDIO_MCLK_4)%10) > 5))
-+
-+#define SNDRV_COLDFIRE_PCM_PLAYBACK_FORMATS SNDRV_PCM_FMTBIT_S16_BE
-+#define SNDRV_COLDFIRE_PCM_CAPTURE_FORMATS SNDRV_PCM_FMTBIT_S16_BE
-+
-+#define RXFWM 2
-+#define TXFWM 2
-+#define HW_PERIODS_BYTES_MIN 4096
-+#define HW_PERIODS_BYTES_STEP 4096
-+
-+#define INPUT_MICROPHONE 0
-+#define INPUT_LINEIN 1
-+#define NUM_TCDS 4
-+
-+static char *id;
-+static struct platform_device *device;
-+static int g_tx_dmaing;
-+static int g_rx_dmaing;
-+static unsigned char g_mastervol, g_lineinvol, g_analogpath;
-+
-+/** Use 4 TCDs for scatter/gather address
-+ * to setup dma chain, one TCD per period
-+ * so that we don't need change them on the fly
-+ */
-+
-+/**
-+ * Link Descriptor
-+ *
-+ * must be aligned on a 32-byte boundary.
-+ */
-+struct dma_tcd {
-+ __be32 saddr; /* source address */
-+ __be16 attr; /* transfer attribute */
-+ __be16 soffset; /* source offset */
-+ __be32 nbytes; /* minor byte count */
-+ __be32 slast; /* last source address adjust */
-+ __be32 daddr; /* dest address */
-+ __be16 citer; /* current minor looplink, major count */
-+ __be16 doffset; /* dest offset */
-+ __be32 dlast_sga; /* last dest addr adjust, scatter/gather addr*/
-+ __be16 biter; /* begging minor looklink, major count */
-+ __be16 csr; /* control and status */
-+} __packed;
-+
-+/** dma_private: p-substream DMA data
-+ *
-+ * The tcd[] array is first because it needs to be aligned on a 32-byte
-+ * boundary, so putting it first will ensure alignment without padding the
-+ * structure.
-+ *
-+ * @tcd[]: array of TCDs
-+ */
-+struct dma_private {
-+ struct dma_tcd tcd0[NUM_TCDS];
-+ struct dma_tcd tcd1[NUM_TCDS];
-+ dma_addr_t tcd_buf_phys; /* physical address of dma_private */
-+ dma_addr_t dma_buf_phys;
-+ dma_addr_t dma_buf_next;
-+ dma_addr_t dma_buf_end;
-+ size_t period_size;
-+ unsigned int num_periods;
-+};
-+
-+struct tlv320a_audio_device {
-+ struct spi_device *spi;
-+ u32 speed;
-+ u32 stereo;
-+ u32 bits;
-+ u32 format;
-+ u8 isopen;
-+ u8 dmaing;
-+ u8 ssi_enabled;
-+ u8 channel;
-+ spinlock_t lock;
-+ u8 *audio_buf;
-+};
-+
-+/* chip specific define */
-+struct chip_spec {
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+ struct tlv320a_audio_device *audio_device;
-+ u32 offset;
-+ void *mixer_data;
-+};
-+
-+/* hardware definition */
-+static struct snd_pcm_hardware snd_coldfire_playback_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED |
-+#if defined(CONFIG_MMU)
-+ SNDRV_PCM_INFO_MMAP |
-+ SNDRV_PCM_INFO_MMAP_VALID|
-+#endif
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
-+ .formats = SNDRV_COLDFIRE_PCM_PLAYBACK_FORMATS,
-+ .rates = SNDRV_PCM_RATE_8000_48000,
-+ .rate_min = 8000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .buffer_bytes_max = MAX_BUFFER_SIZE,
-+ .period_bytes_min = HW_PERIODS_BYTES_MIN,
-+ .period_bytes_max = MAX_BUFFER_SIZE/NUM_TCDS,
-+ .periods_min = NUM_TCDS,
-+ .periods_max = NUM_TCDS,
-+ .fifo_size = 0,
-+};
-+
-+/* hardware definition */
-+static struct snd_pcm_hardware snd_coldfire_capture_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED |
-+#if defined(CONFIG_MMU)
-+ SNDRV_PCM_INFO_MMAP |
-+ SNDRV_PCM_INFO_MMAP_VALID|
-+#endif
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
-+ .formats = SNDRV_COLDFIRE_PCM_CAPTURE_FORMATS,
-+ .rates = SNDRV_PCM_RATE_8000_48000,
-+ .rate_min = 8000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .buffer_bytes_max = MAX_BUFFER_SIZE,
-+ .period_bytes_min = HW_PERIODS_BYTES_MIN,
-+ .period_bytes_max = MAX_BUFFER_SIZE/NUM_TCDS,
-+ .periods_min = NUM_TCDS,
-+ .periods_max = NUM_TCDS,
-+ .fifo_size = 0,
-+};
-+
-+static unsigned int rates[] = {8000, 11025, 16000, 22000,
-+ 22050, 44000, 44100, 48000};
-+
-+/* hw constraints */
-+static struct snd_pcm_hw_constraint_list constraints_rates = {
-+ .count = ARRAY_SIZE(rates),
-+ .list = rates,
-+ .mask = 0,
-+};
-+
-+static inline void ssi_audio_dma_playback_start(void)
-+{
-+ g_tx_dmaing = 1;
-+ mcf_edma_start_transfer(DMA_TX_TCD0);
-+ mcf_edma_start_transfer(DMA_TX_TCD1);
-+}
-+
-+static inline void ssi_audio_dma_capture_start(void)
-+{
-+ g_rx_dmaing = 1;
-+ mcf_edma_start_transfer(DMA_RX_TCD0);
-+ mcf_edma_start_transfer(DMA_RX_TCD1);
-+}
-+
-+static inline void ssi_audio_dma_playback_stop(void)
-+{
-+ g_tx_dmaing = 0;
-+ mcf_edma_stop_transfer(DMA_TX_TCD0);
-+ mcf_edma_stop_transfer(DMA_TX_TCD1);
-+}
-+
-+inline void ssi_audio_dma_capture_stop(void)
-+{
-+ g_rx_dmaing = 0;
-+ mcf_edma_stop_transfer(DMA_RX_TCD0);
-+ mcf_edma_stop_transfer(DMA_RX_TCD1);
-+}
-+
-+/**
-+ * fill_tcd_params - Fill transfer control descriptor (TCD)
-+ * @base: base address of TCD
-+ * @source: source address
-+ * @dest: destination address
-+ * @attr: attributes
-+ * @soff: source offset
-+ * @nbytes: number of bytes to be transfered in minor loop
-+ * @slast: last source address adjustment
-+ * @citer: major loop count
-+ * @biter: beginning minor loop count
-+ * @doff: destination offset
-+ * @dlast_sga: last destination address adjustment
-+ * @major_int: generate interrupt after each major loop
-+ * @disable_req: disable DMA request after major loop
-+ * @enable_sg: enable scatter/gather address
-+ */
-+void fill_tcd_params(u32 base, u32 source, u32 dest,
-+ u32 attr, u32 soff, u32 nbytes, u32 slast,
-+ u32 citer, u32 biter, u32 doff, u32 dlast_sga,
-+ int major_int, int disable_req, int enable_sg)
-+{
-+ struct dma_tcd *tcd = (struct dma_tcd *) base;
-+
-+ tcd->saddr = source;
-+ tcd->attr = attr;
-+ tcd->soffset = soff;
-+ tcd->nbytes = nbytes;
-+ tcd->slast = slast;
-+ tcd->daddr = dest;
-+ tcd->citer = citer & 0x7fff;
-+ tcd->doffset = doff;
-+ tcd->dlast_sga = dlast_sga;
-+ tcd->biter = biter & 0x7fff;
-+ tcd->csr = ((major_int) ? 0x2 : 0) |
-+ ((disable_req) ? 0x8 : 0) |
-+ ((enable_sg) ? 0x10 : 0);
-+}
-+
-+static int
-+ssi_audio_dma_playback_config(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct dma_private *dma_private = runtime->private_data;
-+ u32 size = frames_to_bytes(runtime, runtime->period_size);
-+ u32 offset, soffset, daddr0, daddr1, attr, sga0, sga1;
-+ u32 i, nbyte, major_loops;
-+
-+ if ((runtime->channels < 1) || (runtime->channels > 2)) {
-+ printk(KERN_ERR "Error on channels = %d\n", runtime->channels);
-+ return -EINVAL;
-+ }
-+
-+ dma_private->dma_buf_phys = runtime->dma_addr;
-+ dma_private->dma_buf_next = dma_private->dma_buf_phys;
-+ dma_private->dma_buf_end = dma_private->dma_buf_phys +
-+ runtime->periods * size;
-+
-+ if (runtime->format == SNDRV_PCM_FORMAT_S16_BE) {
-+ nbyte = 2 * TXFWM;
-+ soffset = 2 * runtime->channels;
-+ daddr0 = (u32)&MCF_SSI_TX0 + 2;
-+ daddr1 = (u32)&MCF_SSI_TX1 + 2;
-+ attr = MCF_EDMA_TCD_ATTR_SSIZE_16BIT |
-+ MCF_EDMA_TCD_ATTR_DSIZE_16BIT;
-+ } else {
-+ printk(KERN_ERR "Not supported PCM format %x\n",
-+ runtime->format);
-+ return -EINVAL;
-+ }
-+
-+ major_loops = size/nbyte/runtime->channels;
-+ sga0 = (u32)dma_private->tcd_buf_phys;
-+ sga1 = (u32)dma_private->tcd_buf_phys +
-+ 4 * sizeof(struct dma_tcd);
-+
-+#if defined(CONFIG_M5301x) || defined(CONFIG_M5445X)
-+ MCF_EDMA_TCD10_CSR = 0;
-+ MCF_EDMA_TCD11_CSR = 0;
-+#else
-+ MCF_EDMA_TCD11_CSR = 0;
-+ MCF_EDMA_TCD12_CSR = 0;
-+#endif
-+ offset = (runtime->channels - 1) * 2;
-+ mcf_edma_set_tcd_params(DMA_TX_TCD0,
-+ (u32)dma_private->dma_buf_next,
-+ daddr0,
-+ attr,
-+ soffset,
-+ nbyte,
-+ 0, /* slast */
-+ major_loops, /* citer */
-+ major_loops, /* biter */
-+ 0, /* dest offset */
-+ sga0,
-+ 1, /* major_int */
-+ 0); /* enable dma request after */
-+
-+ mcf_edma_set_tcd_params(DMA_TX_TCD1,
-+ (u32)dma_private->dma_buf_next + offset,
-+ daddr1,
-+ attr,
-+ soffset,
-+ nbyte,
-+ 0, /* slast */
-+ major_loops, /* citer */
-+ major_loops, /* biter */
-+ 0, /* dest offset */
-+ sga1,
-+ 0, /* major_int */
-+ 0); /* enable dma request after */
-+
-+ while (!(MCF_EDMA_TCD_CSR(DMA_TX_TCD0) & MCF_EDMA_TCD_CSR_E_SG))
-+ MCF_EDMA_TCD_CSR(DMA_TX_TCD0) |= MCF_EDMA_TCD_CSR_E_SG;
-+ while (!(MCF_EDMA_TCD_CSR(DMA_TX_TCD1) & MCF_EDMA_TCD_CSR_E_SG))
-+ MCF_EDMA_TCD_CSR(DMA_TX_TCD1) |= MCF_EDMA_TCD_CSR_E_SG;
-+
-+ for (i = 0; i < NUM_TCDS; i++) {
-+ dma_private->dma_buf_next += size;
-+ if (dma_private->dma_buf_next >= dma_private->dma_buf_end)
-+ dma_private->dma_buf_next = dma_private->dma_buf_phys;
-+ sga0 = (u32)dma_private->tcd_buf_phys +
-+ ((i+1)%NUM_TCDS) * sizeof(struct dma_tcd);
-+ sga1 = (u32)dma_private->tcd_buf_phys +
-+ ((i+1)%NUM_TCDS + 4) * sizeof(struct dma_tcd);
-+ DBG("sga0 = 0x%x, sga1 = 0x%x.\n", sga0, sga1);
-+ fill_tcd_params((u32)&dma_private->tcd0[i],
-+ (u32)dma_private->dma_buf_next,
-+ daddr0,
-+ attr,
-+ soffset,
-+ nbyte,
-+ 0, /* slast */
-+ major_loops, /* citer */
-+ major_loops, /* biter */
-+ 0, /* dest offset */
-+ sga0,
-+ 1, /* major_int */
-+ 0, /* enable dma request after */
-+ 1); /* enable scatter/gather */
-+
-+ fill_tcd_params((u32)&dma_private->tcd1[i],
-+ (u32)dma_private->dma_buf_next + offset,
-+ daddr1,
-+ attr,
-+ soffset,
-+ nbyte,
-+ 0, /* slast */
-+ major_loops, /* citer */
-+ major_loops, /* biter */
-+ 0, /* dest offset */
-+ sga1,
-+ 0, /* major_int */
-+ 0, /* enable dma request after */
-+ 1); /* enable scatter/gather */
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+ssi_audio_dma_capture_config(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct dma_private *dma_private = runtime->private_data;
-+ u32 size = frames_to_bytes(runtime, runtime->period_size);
-+ u32 offset, saddr0, saddr1, doffset, attr, sga0, sga1;
-+ int i, nbyte, major_loops;
-+
-+ if ((runtime->channels < 1) || (runtime->channels > 2)) {
-+ printk(KERN_ERR "Error on channels = %d\n", runtime->channels);
-+ return -EINVAL;
-+ }
-+
-+ dma_private->dma_buf_phys = runtime->dma_addr;
-+ dma_private->dma_buf_next = dma_private->dma_buf_phys;
-+ dma_private->dma_buf_end = dma_private->dma_buf_phys +
-+ runtime->periods * size;
-+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ saddr0 = (u32)&MCF_SSI_RX0 + 2;
-+ saddr1 = (u32)&MCF_SSI_RX1 + 2;
-+ nbyte = 2 * RXFWM;
-+ doffset = 2 * runtime->channels;
-+ attr = MCF_EDMA_TCD_ATTR_SSIZE_16BIT |
-+ MCF_EDMA_TCD_ATTR_DSIZE_16BIT;
-+ break;
-+ default:
-+ printk(KERN_ERR "Not supported PCM format %x\n",
-+ runtime->format);
-+ return -EINVAL;
-+ }
-+
-+ major_loops = size/nbyte/runtime->channels;
-+ sga0 = (u32)dma_private->tcd_buf_phys;
-+ sga1 = (u32)dma_private->tcd_buf_phys +
-+ 4 * sizeof(struct dma_tcd);
-+
-+#if defined(CONFIG_M5301x) || defined(CONFIG_M5445X)
-+ MCF_EDMA_TCD8_CSR = 0;
-+ MCF_EDMA_TCD9_CSR = 0;
-+#else
-+ MCF_EDMA_TCD9_CSR = 0;
-+ MCF_EDMA_TCD10_CSR = 0;
-+#endif
-+ offset = (runtime->channels - 1) * 2;
-+ mcf_edma_set_tcd_params(DMA_RX_TCD0,
-+ saddr0,
-+ (u32)dma_private->dma_buf_next,
-+ attr,
-+ 0, /* source offset */
-+ nbyte,
-+ 0, /* slast */
-+ major_loops, /* citer */
-+ major_loops, /* biter */
-+ doffset,
-+ sga0,
-+ 1, /* major_int */
-+ 0); /* enable dma request after */
-+
-+ mcf_edma_set_tcd_params(DMA_RX_TCD1,
-+ saddr1,
-+ (u32)dma_private->dma_buf_next + offset,
-+ attr,
-+ 0, /* source offset */
-+ nbyte,
-+ 0, /* slast */
-+ major_loops, /* citer */
-+ major_loops, /* biter */
-+ doffset,
-+ sga1,
-+ 0, /* major_int */
-+ 0); /* enable dma request after */
-+
-+ while (!(MCF_EDMA_TCD_CSR(DMA_RX_TCD0) & MCF_EDMA_TCD_CSR_E_SG))
-+ MCF_EDMA_TCD_CSR(DMA_RX_TCD0) |= MCF_EDMA_TCD_CSR_E_SG;
-+ while (!(MCF_EDMA_TCD_CSR(DMA_RX_TCD1) & MCF_EDMA_TCD_CSR_E_SG))
-+ MCF_EDMA_TCD_CSR(DMA_RX_TCD1) |= MCF_EDMA_TCD_CSR_E_SG;
-+
-+ for (i = 0; i < NUM_TCDS; i++) {
-+ dma_private->dma_buf_next += size;
-+ if (dma_private->dma_buf_next >= dma_private->dma_buf_end)
-+ dma_private->dma_buf_next = dma_private->dma_buf_phys;
-+ sga0 = (u32)dma_private->tcd_buf_phys +
-+ ((i+1)%NUM_TCDS) * sizeof(struct dma_tcd);
-+ sga1 = (u32)dma_private->tcd_buf_phys +
-+ ((i+1)%NUM_TCDS + 4) * sizeof(struct dma_tcd);
-+ fill_tcd_params((u32)&dma_private->tcd0[i],
-+ saddr0,
-+ (u32)dma_private->dma_buf_next,
-+ attr,
-+ 0, /* source offset */
-+ nbyte,
-+ 0, /* slast */
-+ major_loops, /* citer */
-+ major_loops, /* biter */
-+ doffset,
-+ sga0,
-+ 1, /* major_int */
-+ 0, /* enable dma request after */
-+ 1); /* enable scatter/gather */
-+ fill_tcd_params((u32)&dma_private->tcd1[i],
-+ saddr1,
-+ (u32)dma_private->dma_buf_next + offset,
-+ attr,
-+ 0, /* source offset */
-+ nbyte,
-+ 0, /* slast */
-+ major_loops, /* citer */
-+ major_loops, /* biter */
-+ doffset,
-+ sga1,
-+ 0, /* major_int */
-+ 0, /* enable dma request after */
-+ 1); /* enable scatter/gather */
-+ }
-+ return 0;
-+}
-+
-+static inline void ssi_audio_enable_ssi_playback(void)
-+{
-+ MCF_SSI_CR |= MCF_SSI_CR_SSI_EN | MCF_SSI_CR_TE;
-+}
-+
-+static inline void ssi_audio_enable_ssi_capture(void)
-+{
-+ MCF_SSI_CR |= MCF_SSI_CR_SSI_EN | MCF_SSI_CR_RE;
-+}
-+
-+static inline void ssi_audio_disable_ssi(void)
-+{
-+ MCF_SSI_CR &= ~(MCF_SSI_CR_TE | MCF_SSI_CR_RE | MCF_SSI_CR_SSI_EN);
-+}
-+
-+static inline void ssi_audio_disable_ssi_playback(void)
-+{
-+ MCF_SSI_CR &= ~MCF_SSI_CR_TE;
-+}
-+
-+static inline void ssi_audio_disable_ssi_capture(void)
-+{
-+ MCF_SSI_CR &= ~MCF_SSI_CR_RE;
-+}
-+
-+static irqreturn_t ssi_audio_dma_playback_handler(int channel, void *dev_id)
-+{
-+ struct snd_pcm_substream *substream;
-+ struct snd_pcm_runtime *runtime;
-+
-+ substream = (struct snd_pcm_substream *)dev_id;
-+ runtime = substream->runtime;
-+
-+ /* inform ALSA middle layer about transfer status */
-+ snd_pcm_period_elapsed(substream);
-+ mcf_edma_confirm_interrupt_handled(DMA_TX_TCD0);
-+ mcf_edma_confirm_interrupt_handled(DMA_TX_TCD1);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t ssi_audio_dma_capture_handler(int channel, void *dev_id)
-+{
-+ struct snd_pcm_substream *substream;
-+ struct snd_pcm_runtime *runtime;
-+
-+ substream = (struct snd_pcm_substream *)dev_id;
-+ runtime = substream->runtime;
-+
-+ /* inform ALSA middle layer about transfer status */
-+ snd_pcm_period_elapsed(substream);
-+ mcf_edma_confirm_interrupt_handled(DMA_RX_TCD0);
-+ mcf_edma_confirm_interrupt_handled(DMA_RX_TCD1);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+int ssi_audio_dma_request_playback_channel(struct snd_pcm_substream *substream)
-+{
-+ int err;
-+ struct chip_spec *chip = snd_pcm_substream_chip(substream);
-+
-+ /* request eDMA channel */
-+ err = mcf_edma_request_channel(DMA_TX_TCD0,
-+ ssi_audio_dma_playback_handler,
-+ NULL,
-+ MCF_SSI_AUDIO_IRQ_LEVEL,
-+ substream,
-+ &(chip->audio_device->lock),
-+ id);
-+ if (err < 0)
-+ return err;
-+ err = mcf_edma_request_channel(DMA_TX_TCD1,
-+ ssi_audio_dma_playback_handler,
-+ NULL,
-+ MCF_SSI_AUDIO_IRQ_LEVEL,
-+ substream,
-+ &(chip->audio_device->lock),
-+ id);
-+ return err;
-+}
-+
-+int ssi_audio_dma_request_capture_channel(struct snd_pcm_substream *substream)
-+{
-+ int err;
-+ struct chip_spec *chip = snd_pcm_substream_chip(substream);
-+
-+ /* request 2 eDMA channels for two fifo */
-+ err = mcf_edma_request_channel(DMA_RX_TCD0,
-+ ssi_audio_dma_capture_handler,
-+ NULL,
-+ MCF_SSI_AUDIO_IRQ_LEVEL,
-+ substream,
-+ &(chip->audio_device->lock),
-+ id);
-+ if (err < 0)
-+ return err;
-+ err = mcf_edma_request_channel(DMA_RX_TCD1,
-+ ssi_audio_dma_capture_handler,
-+ NULL,
-+ MCF_SSI_AUDIO_IRQ_LEVEL,
-+ substream,
-+ &(chip->audio_device->lock),
-+ id);
-+ return err;
-+}
-+
-+static inline void ssi_audio_init_dma(void)
-+{
-+ /* SSI DMA Signals mapped to DMA request */
-+ MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_TIM_DMA;
-+}
-+
-+static void ssi_audio_adjust_codec_speed(struct snd_pcm_substream *substream)
-+{
-+ ssi_audio_disable_ssi();
-+
-+ if (substream->runtime->format == SNDRV_PCM_FORMAT_S16_BE) {
-+ MCF_SSI_CCR = MCF_SSI_CCR_WL(7) | /* 16 bit word length */
-+ MCF_SSI_CCR_DC(1); /* Frame rate divider */
-+ }
-+
-+ switch (substream->runtime->rate) {
-+ case 8000:
-+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
-+ MCF_CCM_CDR = (MCF_CCM_CDR | MCF_CCM_CDR_SSIDIV(0x20))
-+ | MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_1);
-+#else
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0xFF)) |
-+ MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_1);
-+#endif
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(11);
-+ mcf_codec_spi_write(TLV320AIC23_CODEC_SAMPLE_RATE_REG,
-+ TLV320AIC23_CODEC_SAMPLERATE_REG_8KHZ);
-+ break;
-+ case 11000:
-+ case 11025:
-+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0x3F)) |
-+ MCF_CCM_CDR_SSIDIV(0x2B);
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(11);
-+#else
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0xFF)) |
-+ MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_3);
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(9);
-+#endif
-+ mcf_codec_spi_write(TLV320AIC23_CODEC_SAMPLE_RATE_REG,
-+ TLV320AIC23_CODEC_SAMPLERATE_REG_11KHZ);
-+ break;
-+ case 16000:
-+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
-+ MCF_CCM_CDR = (MCF_CCM_CDR | MCF_CCM_CDR_SSIDIV(0x20))
-+ | MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_1);
-+#else
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0xFF)) |
-+ MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_1);
-+#endif
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(5);
-+ mcf_codec_spi_write(TLV320AIC23_CODEC_SAMPLE_RATE_REG,
-+ TLV320AIC23_CODEC_SAMPLERATE_REG_16KHZ);
-+ break;
-+ case 22000:
-+ case 22050:
-+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0x3F)) |
-+ MCF_CCM_CDR_SSIDIV(0x2B);
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(5);
-+#else
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0xFF)) |
-+ MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_3);
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(4);
-+#endif
-+ mcf_codec_spi_write(TLV320AIC23_CODEC_SAMPLE_RATE_REG,
-+ TLV320AIC23_CODEC_SAMPLERATE_REG_22KHZ);
-+ break;
-+ case 48000:
-+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0x3F)) |
-+ MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_4);
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(3);
-+#else
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0xFF)) |
-+ MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_1);
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(1);
-+#endif
-+ mcf_codec_spi_write(TLV320AIC23_CODEC_SAMPLE_RATE_REG,
-+ TLV320AIC23_CODEC_SAMPLERATE_REG_48KHZ);
-+ break;
-+ case 44000:
-+ case 44100:
-+ default:
-+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0x3F)) |
-+ MCF_CCM_CDR_SSIDIV(0x2B);
-+#else
-+ MCF_CCM_CDR = (MCF_CCM_CDR & ~MCF_CCM_CDR_SSIDIV(0xFF)) |
-+ MCF_CCM_CDR_SSIDIV(MCF_SSI_AUDIO_SSDIV_VALUE_2);
-+#endif
-+ MCF_SSI_CCR |= MCF_SSI_CCR_PM(2);
-+ mcf_codec_spi_write(TLV320AIC23_CODEC_SAMPLE_RATE_REG,
-+ TLV320AIC23_CODEC_SAMPLERATE_REG_44KHZ);
-+ break;
-+ }
-+ DBG("MCF_CCM_CDR = 0x%x, MCF_SSI_CCR = 0x%x.\n",
-+ MCF_CCM_CDR, MCF_SSI_CCR);
-+}
-+
-+static void ssi_audio_codec_reset(void)
-+{
-+ mcf_codec_spi_write(CODEC_RESET_REG, 0); /* reset the audio chip */
-+ udelay(2500); /* wait for reset */
-+}
-+
-+static void
-+ssi_audio_init_codec_for_playback(struct snd_pcm_substream *substream)
-+{
-+ mcf_codec_spi_write(CODEC_LEFT_IN_REG, g_lineinvol);
-+ mcf_codec_spi_write(CODEC_RIGHT_IN_REG, g_lineinvol);
-+ mcf_codec_spi_write(CODEC_POWER_DOWN_REG, 0x060);
-+ mcf_codec_spi_write(CODEC_DIGITAL_IF_FMT_REG, 0x02);
-+ mcf_codec_spi_write(CODEC_DIGITAL_APATH_REG, 0x006);
-+ mcf_codec_spi_write(CODEC_DIGITAL_IF_ACT_REG, 0x001);
-+ mcf_codec_spi_write(CODEC_ANALOG_APATH_REG, g_analogpath);
-+ mcf_codec_spi_write(CODEC_LEFT_HP_VOL_REG, g_mastervol);
-+ mcf_codec_spi_write(CODEC_RIGHT_HP_VOL_REG, g_mastervol);
-+}
-+
-+static void
-+ssi_audio_init_codec_for_capture(struct snd_pcm_substream *substream)
-+{
-+ mcf_codec_spi_write(CODEC_LEFT_IN_REG, g_lineinvol);
-+ mcf_codec_spi_write(CODEC_RIGHT_IN_REG, g_lineinvol);
-+ mcf_codec_spi_write(CODEC_POWER_DOWN_REG, 0x060);
-+ mcf_codec_spi_write(CODEC_DIGITAL_IF_FMT_REG, 0x02);
-+ mcf_codec_spi_write(CODEC_DIGITAL_APATH_REG, 0x006);
-+ mcf_codec_spi_write(CODEC_DIGITAL_IF_ACT_REG, 0x001);
-+ mcf_codec_spi_write(CODEC_ANALOG_APATH_REG, g_analogpath);
-+ mcf_codec_spi_write(CODEC_LEFT_HP_VOL_REG, g_mastervol);
-+ mcf_codec_spi_write(CODEC_RIGHT_HP_VOL_REG, g_mastervol);
-+}
-+
-+static void ssi_audio_chip_init(void)
-+{
-+ int chip_initialized = 0;
-+ if (chip_initialized == 1)
-+ return;
-+
-+ ssi_audio_init_dma();
-+ /* Enable the SSI pins */
-+#if defined(CONFIG_M5227x)
-+ MCF_GPIO_PAR_UART = (MCF_GPIO_PAR_UART
-+ &~MCF_GPIO_PAR_UART_PAR_U1TXD(0xF)
-+ &~MCF_GPIO_PAR_UART_PAR_U1RXD(0xF)
-+ &~MCF_GPIO_PAR_UART_PAR_U1RTS(0xF)
-+ &~MCF_GPIO_PAR_UART_PAR_U1CTS(0xF))
-+ | MCF_GPIO_PAR_UART_PAR_U1CTS_SSI_BCLK
-+ | MCF_GPIO_PAR_UART_PAR_U1RTS_SSI_FS
-+ | MCF_GPIO_PAR_UART_PAR_U1RXD_SSI_RXD
-+ | MCF_GPIO_PAR_UART_PAR_U1TXD_SSI_TXD;
-+
-+ MCF_GPIO_PAR_TIMER = (MCF_GPIO_PAR_TIMER
-+ &~MCF_GPIO_PAR_TIMER_PAR_T3IN(0xF))
-+ | MCF_GPIO_PAR_TIMER_PAR_T3IN_SSI_MCLK;
-+#endif
-+#if defined(CONFIG_M532x)
-+ MCF_GPIO_PAR_SSI = (0
-+ | MCF_GPIO_PAR_SSI_PAR_MCLK
-+ | MCF_GPIO_PAR_SSI_PAR_TXD(3)
-+ | MCF_GPIO_PAR_SSI_PAR_RXD(3)
-+ | MCF_GPIO_PAR_SSI_PAR_FS(3)
-+ | MCF_GPIO_PAR_SSI_PAR_BCLK(3));
-+#endif
-+#if defined(CONFIG_M537x)
-+ MCF_GPIO_PAR_UART = (MCF_GPIO_PAR_UART
-+ &~MCF_GPIO_PAR_UART_PAR_UTXD1(0xF)
-+ &~MCF_GPIO_PAR_UART_PAR_URXD1(0xF)
-+ &~MCF_GPIO_PAR_UART_PAR_URTS1(0xF)
-+ &~MCF_GPIO_PAR_UART_PAR_UCTS1(0xF))
-+ | MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK
-+ | MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS
-+ | MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD
-+ | MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD;
-+
-+ MCF_GPIO_PAR_IRQ = MCF_GPIO_PAR_IRQ_PAR_IRQ4(1);
-+#endif
-+#if defined(CONFIG_M5301x)
-+ MCF_GPIO_PAR_SSIH = (MCF_GPIO_PAR_SSIH_PAR_RXD_SSI_RXD |
-+ MCF_GPIO_PAR_SSIH_PAR_TXD_SSI_TXD |
-+ MCF_GPIO_PAR_SSIH_PAR_FS_SSI_FS |
-+ MCF_GPIO_PAR_SSIH_PAR_MCLK_SSI_MCLK);
-+ MCF_GPIO_PAR_SSIL = MCF_GPIO_PAR_SSIL_PAR_BCLK_SSI_BCLK;
-+#endif
-+#if defined(CONFIG_M5445X)
-+ MCF_GPIO_PAR_SSI = (MCF_GPIO_PAR_SSI_MCLK |
-+ MCF_GPIO_PAR_SSI_STXD_STXD |
-+ MCF_GPIO_PAR_SSI_SRXD_SRXD |
-+ MCF_GPIO_PAR_SSI_FS_FS |
-+ MCF_GPIO_PAR_SSI_BCLK_BCLK);
-+#endif
-+ chip_initialized = 1;
-+}
-+
-+static void ssi_audio_init_ssi_playback(void)
-+{
-+ /* Issue a SSI reset */
-+ MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN;
-+
-+ /* SSI module uses internal CPU clock */
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSI_SRC;
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M532x) || defined(CONFIG_M537x) \
-+ || defined(CONFIG_M5227x)
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSI_PUE | MCF_CCM_MISCCR_SSI_PUS;
-+#endif
-+#if defined(CONFIG_M5301x)
-+ MCF_GPIO_PCRH |= MCF_GPIO_PCRH_SSI_PUS | MCF_GPIO_PCRH_SSI_PUE;
-+#endif
-+ MCF_SSI_CR = MCF_SSI_CR_CIS |
-+ MCF_SSI_CR_TCH | /* Enable two channel mode */
-+ MCF_SSI_CR_MCE | /* clock out on SSI_MCLK pin */
-+ MCF_SSI_CR_I2S_MASTER | /* I2S master mode */
-+ MCF_SSI_CR_SYN | /* Enable synchronous mode */
-+ MCF_SSI_CR_NET; /* Auto set by I2S Master */
-+
-+ MCF_SSI_TCR = 0 |
-+ /* internally generated bit clock */
-+ MCF_SSI_TCR_TXDIR |
-+ /* internally generated frame sync */
-+ MCF_SSI_TCR_TFDIR |
-+ /* Clock data on falling edge of bit clock */
-+ MCF_SSI_TCR_TSCKP |
-+ /* Frame sync active low */
-+ MCF_SSI_TCR_TFSI |
-+ /* TX frame sync 1 bit before data */
-+ MCF_SSI_TCR_TEFS |
-+ /* TX FIFO 0 enabled */
-+ MCF_SSI_TCR_TFEN0 |
-+ /* TX FIFO 1 enabled */
-+ MCF_SSI_TCR_TFEN1 |
-+ MCF_SSI_TCR_TXBIT0;
-+
-+ MCF_SSI_FCSR = MCF_SSI_FCSR_TFWM0(TXFWM) | MCF_SSI_FCSR_TFWM1(TXFWM);
-+
-+ MCF_SSI_IER = MCF_SSI_IER_TDMAE | /* DMA request enabled */
-+ MCF_SSI_IER_TFE0 |
-+ MCF_SSI_IER_TFE1; /* set by reset actually*/
-+}
-+
-+static void ssi_audio_init_ssi_capture(void)
-+{
-+ /* Issue a SSI reset */
-+ MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN;
-+
-+ /* SSI module uses internal CPU clock */
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSI_SRC;
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M532x) || defined(CONFIG_M537x) \
-+ || defined(CONFIG_M5227x)
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSI_PUE | MCF_CCM_MISCCR_SSI_PUS;
-+#endif
-+#if defined(CONFIG_M5301x)
-+ MCF_GPIO_PCRH |= MCF_GPIO_PCRH_SSI_PUS | MCF_GPIO_PCRH_SSI_PUE;
-+#endif
-+ MCF_SSI_CR = MCF_SSI_CR_CIS |
-+ MCF_SSI_CR_TCH | /* Enable two channel mode */
-+ MCF_SSI_CR_MCE | /* clock out on SSI_MCLK pin */
-+ MCF_SSI_CR_I2S_MASTER | /* I2S master mode */
-+ MCF_SSI_CR_SYN | /* Enable synchronous mode */
-+ MCF_SSI_CR_NET; /* Auto set by I2S Master */
-+
-+ MCF_SSI_TCR = 0 |
-+ /* internally generated bit clock */
-+ MCF_SSI_TCR_TXDIR |
-+ /* internally generated frame sync */
-+ MCF_SSI_TCR_TFDIR |
-+ /* Clock data on falling edge of bit clock */
-+ MCF_SSI_TCR_TSCKP |
-+ /* Frame sync active low */
-+ MCF_SSI_TCR_TFSI |
-+ /* TX frame sync 1 bit before data */
-+ MCF_SSI_TCR_TEFS |
-+ /* TX FIFO 0 enabled */
-+ MCF_SSI_TCR_TFEN0 |
-+ /* TX FIFO 1 enabled */
-+ MCF_SSI_TCR_TFEN1 |
-+ MCF_SSI_TCR_TXBIT0;
-+
-+ MCF_SSI_RCR = 0 |
-+ /* Clock data on rising edge of bit clock */
-+ MCF_SSI_RCR_RSCKP |
-+ /* Frame sync active low */
-+ MCF_SSI_RCR_RFSI |
-+ /* RX frame sync 1 bit before data */
-+ MCF_SSI_RCR_REFS |
-+ /* RX FIFO 0 enabled */
-+ MCF_SSI_RCR_RFEN0 |
-+ /* RX FIFO 1 enabled */
-+ MCF_SSI_RCR_RFEN1 |
-+ MCF_SSI_RCR_RXBIT0; /* Auto set by I2S Master */
-+
-+ MCF_SSI_FCSR = MCF_SSI_FCSR_RFWM0(RXFWM) | MCF_SSI_FCSR_RFWM1(RXFWM);
-+
-+ /* interrupts */
-+ MCF_SSI_IER = MCF_SSI_IER_RDMAE | /* DMA request enabled */
-+ MCF_SSI_IER_RFF0 | /* rx FIFO 0 full */
-+ MCF_SSI_IER_RFF1; /* rx FIFO 1 full */
-+}
-+
-+static int snd_coldfire_playback_open(struct snd_pcm_substream *substream)
-+{
-+ int err;
-+ struct chip_spec *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct dma_private *dma_private;
-+ dma_addr_t tcd_buf_phys;
-+
-+ runtime->hw = snd_coldfire_playback_hw;
-+ err = snd_pcm_hw_constraint_integer(runtime,
-+ SNDRV_PCM_HW_PARAM_PERIODS);
-+ if (err < 0) {
-+ printk(KERN_ERR "invalid buffer size\n");
-+ return err;
-+ }
-+ /* to make sure period_bytes is the multiple of size of minor loops */
-+ err = snd_pcm_hw_constraint_step(runtime, 0,
-+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
-+ HW_PERIODS_BYTES_STEP);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error setting period_bytes step, "
-+ "err=%d\n", err);
-+ return err;
-+ }
-+ err = snd_pcm_hw_constraint_list(substream->runtime, 0,
-+ SNDRV_PCM_HW_PARAM_RATE,
-+ &constraints_rates);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error setting rate constraints, "
-+ "err=%d\n", err);
-+ return err;
-+ }
-+ ssi_audio_chip_init();
-+ ssi_audio_init_ssi_playback();
-+ ssi_audio_init_codec_for_playback(substream);
-+ err = ssi_audio_dma_request_playback_channel(substream);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error requesting dma channel, err=%d\n", err);
-+ return err;
-+ }
-+
-+ dma_private = dma_alloc_coherent(substream->pcm->dev,
-+ sizeof(struct dma_private), &tcd_buf_phys, GFP_KERNEL);
-+
-+ if (!dma_private) {
-+ dev_err(substream->pcm->card->dev,
-+ "can't allocate DMA private data\n");
-+ return -ENOMEM;
-+ }
-+
-+ dma_private->tcd_buf_phys = tcd_buf_phys;
-+ runtime->private_data = dma_private;
-+
-+ chip->offset = 0;
-+ g_tx_dmaing = 0;
-+ return 0;
-+}
-+
-+static int snd_coldfire_capture_open(struct snd_pcm_substream *substream)
-+{
-+ int err;
-+ struct chip_spec *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct dma_private *dma_private;
-+ dma_addr_t tcd_buf_phys;
-+
-+ runtime->hw = snd_coldfire_capture_hw;
-+
-+ err = snd_pcm_hw_constraint_integer(runtime,
-+ SNDRV_PCM_HW_PARAM_PERIODS);
-+ if (err < 0) {
-+ printk(KERN_ERR "invalid buffer size\n");
-+ return err;
-+ }
-+ /* to make sure period_bytes is the multiple of size of minor loops */
-+ err = snd_pcm_hw_constraint_step(runtime, 0,
-+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
-+ HW_PERIODS_BYTES_STEP);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error setting period_bytes step, "
-+ "err=%d\n", err);
-+ return err;
-+ }
-+ err = snd_pcm_hw_constraint_list(substream->runtime, 0,
-+ SNDRV_PCM_HW_PARAM_RATE,
-+ &constraints_rates);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error setting pcm_hw_constraint_list, "
-+ "err=%d\n", err);
-+ return err;
-+ }
-+
-+ ssi_audio_chip_init();
-+ ssi_audio_init_ssi_capture();
-+ ssi_audio_init_codec_for_capture(substream);
-+ err = ssi_audio_dma_request_capture_channel(substream);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error requesting dma channel, err=%d\n", err);
-+ return err;
-+ }
-+
-+ dma_private = dma_alloc_coherent(substream->pcm->dev,
-+ sizeof(struct dma_private), &tcd_buf_phys, GFP_KERNEL);
-+
-+ if (!dma_private) {
-+ dev_err(substream->pcm->card->dev,
-+ "can't allocate DMA private data\n");
-+ return -ENOMEM;
-+ }
-+ dma_private->tcd_buf_phys = tcd_buf_phys;
-+ dma_private->dma_buf_phys = substream->dma_buffer.addr;
-+
-+ runtime->private_data = dma_private;
-+
-+ chip->offset = 0;
-+ g_rx_dmaing = 0;
-+ return 0;
-+}
-+
-+static int snd_coldfire_playback_close(struct snd_pcm_substream *substream)
-+{
-+ struct dma_private *dma_private = substream->runtime->private_data;
-+
-+ ssi_audio_dma_playback_stop();
-+ mcf_edma_free_channel(DMA_TX_TCD0, substream);
-+ mcf_edma_free_channel(DMA_TX_TCD1, substream);
-+ if (dma_private) {
-+ dma_free_coherent(substream->pcm->dev,
-+ sizeof(struct dma_private),
-+ dma_private, dma_private->tcd_buf_phys);
-+ substream->runtime->private_data = NULL;
-+ }
-+ ssi_audio_disable_ssi();
-+ return 0;
-+}
-+
-+static int snd_coldfire_capture_close(struct snd_pcm_substream *substream)
-+{
-+ struct dma_private *dma_private = substream->runtime->private_data;
-+
-+ ssi_audio_dma_capture_stop();
-+ mcf_edma_free_channel(DMA_RX_TCD0, substream);
-+ mcf_edma_free_channel(DMA_RX_TCD1, substream);
-+ /* Deallocate the fsl_dma_private structure */
-+ if (dma_private) {
-+ dma_free_coherent(substream->pcm->dev,
-+ sizeof(struct dma_private),
-+ dma_private, dma_private->tcd_buf_phys);
-+ substream->runtime->private_data = NULL;
-+ }
-+ ssi_audio_disable_ssi();
-+ return 0;
-+}
-+
-+static int snd_coldfire_pcm_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ int err;
-+
-+ /* set runtime buffer */
-+ err = snd_pcm_lib_malloc_pages(
-+ substream, params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ printk(KERN_ERR "Error allocating pages, err=%d\n", err);
-+ return err;
-+}
-+
-+static int snd_coldfire_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+ /* free the memory if was newly allocated */
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int
-+snd_coldfire_pcm_playback_prepare(struct snd_pcm_substream *substream)
-+{
-+ int err;
-+
-+ if (g_tx_dmaing == 1)
-+ return 0;
-+
-+ ssi_audio_adjust_codec_speed(substream);
-+ err = ssi_audio_dma_playback_config(substream);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error configuring playback, "
-+ "err=%d\n", err);
-+ return err;
-+ }
-+
-+ ssi_audio_dma_playback_start();
-+ return 0;
-+}
-+
-+static int snd_coldfire_pcm_capture_prepare(struct snd_pcm_substream *substream)
-+{
-+ int err;
-+
-+ if (g_rx_dmaing == 1)
-+ return 0;
-+
-+ ssi_audio_adjust_codec_speed(substream);
-+ err = ssi_audio_dma_capture_config(substream);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error configuring capture, "
-+ "err=%d\n", err);
-+ return err;
-+ }
-+ ssi_audio_dma_capture_start();
-+
-+ return 0;
-+}
-+
-+static int
-+snd_coldfire_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ ssi_audio_enable_ssi_playback();
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ ssi_audio_disable_ssi_playback();
-+ break;
-+ default:
-+ printk(KERN_ERR "Unsupported trigger command, cmd=%d\n", cmd);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+snd_coldfire_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ ssi_audio_enable_ssi_capture();
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ ssi_audio_disable_ssi_capture();
-+ break;
-+ default:
-+ printk(KERN_ERR "Unsupported trigger command, cmd=%d\n", cmd);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static snd_pcm_uframes_t
-+snd_coldfire_pcm_playback_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct dma_private *dma_private = runtime->private_data;
-+ snd_pcm_uframes_t pointer;
-+ u32 offset;
-+
-+ offset = (u32)(MCF_EDMA_TCD_SADDR(DMA_TX_TCD0) -
-+ dma_private->dma_buf_phys);
-+ if (runtime->format == SNDRV_PCM_FORMAT_S16_BE)
-+ pointer = offset / (runtime->channels == 1 ? 2 : 4);
-+ else
-+ pointer = 0;
-+
-+ return pointer;
-+}
-+
-+static snd_pcm_uframes_t
-+snd_coldfire_pcm_capture_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct dma_private *dma_private = runtime->private_data;
-+ snd_pcm_uframes_t pointer;
-+ u32 offset;
-+
-+ offset = (u32)(MCF_EDMA_TCD_DADDR(DMA_RX_TCD0) -
-+ dma_private->dma_buf_phys);
-+ if (runtime->format == SNDRV_PCM_FORMAT_S16_BE)
-+ pointer = offset / (runtime->channels == 1 ? 2 : 4);
-+ else
-+ pointer = 0;
-+
-+ return pointer;
-+}
-+
-+static struct snd_pcm_ops snd_coldfire_playback_ops = {
-+ .open = snd_coldfire_playback_open,
-+ .close = snd_coldfire_playback_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_coldfire_pcm_hw_params,
-+ .hw_free = snd_coldfire_pcm_hw_free,
-+ .prepare = snd_coldfire_pcm_playback_prepare,
-+ .trigger = snd_coldfire_pcm_playback_trigger,
-+ .pointer = snd_coldfire_pcm_playback_pointer,
-+};
-+
-+static struct snd_pcm_ops snd_coldfire_capture_ops = {
-+ .open = snd_coldfire_capture_open,
-+ .close = snd_coldfire_capture_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_coldfire_pcm_hw_params,
-+ .hw_free = snd_coldfire_pcm_hw_free,
-+ .prepare = snd_coldfire_pcm_capture_prepare,
-+ .trigger = snd_coldfire_pcm_capture_trigger,
-+ .pointer = snd_coldfire_pcm_capture_pointer,
-+};
-+
-+static int snd_coldfire_new_pcm(struct chip_spec *chip)
-+{
-+ struct snd_pcm *pcm;
-+ int err;
-+
-+ err = snd_pcm_new(chip->card, "coldfire", 0, 1, 1,
-+ &pcm);
-+ if (err < 0) {
-+ printk(KERN_ERR "Error creating new pcm, err=%d\n", err);
-+ return err;
-+ }
-+ pcm->private_data = chip;
-+ strncpy(pcm->name, SOUND_CARD_NAME, sizeof(pcm->name));
-+ chip->pcm = pcm;
-+ pcm->info_flags = 0;
-+
-+ /* set operators */
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
-+ &snd_coldfire_playback_ops);
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
-+ &snd_coldfire_capture_ops);
-+ /* pre-allocation of buffers */
-+ err = snd_pcm_lib_preallocate_pages_for_all(
-+ pcm,
-+ SNDRV_DMA_TYPE_CONTINUOUS,
-+ snd_dma_continuous_data(GFP_KERNEL),
-+ MAX_BUFFER_SIZE,
-+ MAX_BUFFER_SIZE);
-+
-+ if (!pcm->streams[0].substream->dma_buffer.addr)
-+ pcm->streams[0].substream->dma_buffer.addr =
-+ virt_to_phys(pcm->streams[0].substream->dma_buffer.area);
-+ if (!pcm->streams[1].substream->dma_buffer.addr)
-+ pcm->streams[1].substream->dma_buffer.addr =
-+ virt_to_phys(pcm->streams[1].substream->dma_buffer.area);
-+
-+ if (err) {
-+ printk(KERN_ERR
-+ "Can't pre-allocate DMA buffer (size=%u)\n",
-+ MAX_BUFFER_SIZE);
-+ return -ENOMEM;
-+ }
-+
-+ chip->audio_device =
-+ kmalloc(sizeof(struct tlv320a_audio_device), GFP_DMA);
-+
-+ if (!chip->audio_device) {
-+ snd_pcm_lib_preallocate_free_for_all(pcm);
-+ printk(KERN_ERR
-+ "Can't allocate buffer for audio device\n");
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+static int tlv320a_set_out_volume(unsigned char value)
-+{
-+ unsigned char data;
-+
-+ if (value > TLV320A_VOL_MAX)
-+ data = TLV320A_VOL_MAX;
-+ else
-+ data = value;
-+
-+ if (mcf_codec_spi_write(CODEC_LEFT_HP_VOL_REG, data) < 0)
-+ return -EINVAL;
-+
-+ if (mcf_codec_spi_write(CODEC_RIGHT_HP_VOL_REG, data) < 0)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static int tlv320a_info_out_volume(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = TLV320A_VOL_MIN;
-+ uinfo->value.integer.max = TLV320A_VOL_MAX;
-+ return 0;
-+}
-+
-+static int tlv320a_get_out_volume(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ ucontrol->value.integer.value[0] = g_mastervol;
-+ return 0;
-+}
-+
-+static int tlv320a_put_out_volume(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ unsigned char vol;
-+ int change;
-+
-+ vol = ucontrol->value.integer.value[0];
-+
-+ if (vol > TLV320A_VOL_MAX)
-+ return -EINVAL;
-+
-+ change = (g_mastervol != vol);
-+ if (change) {
-+ g_mastervol = vol;
-+ tlv320a_set_out_volume(vol);
-+ }
-+ return change;
-+}
-+
-+static int tlv320a_set_linein_volume(unsigned char value)
-+{
-+ unsigned char data;
-+
-+ if (value > TLV320A_LINEIN_MAX)
-+ data = TLV320A_LINEIN_MAX;
-+ else
-+ data = value;
-+
-+ if (mcf_codec_spi_write(CODEC_LEFT_IN_REG, data) < 0)
-+ return -EINVAL;
-+
-+ if (mcf_codec_spi_write(CODEC_RIGHT_IN_REG, data) < 0)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static int tlv320a_info_linein_volume(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = TLV320A_LINEIN_MAX;
-+ return 0;
-+}
-+
-+static int tlv320a_get_linein_volume(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ ucontrol->value.integer.value[0] = g_lineinvol;
-+ return 0;
-+}
-+
-+static int tlv320a_put_linein_volume(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ unsigned char vol;
-+ int change;
-+
-+ vol = ucontrol->value.integer.value[0];
-+
-+ if (vol > TLV320A_LINEIN_MAX)
-+ return -EINVAL;
-+
-+ change = (g_lineinvol != vol);
-+ if (change) {
-+ g_lineinvol = vol;
-+ tlv320a_set_linein_volume(vol);
-+ }
-+ return change;
-+}
-+
-+#define tlv320a_info_mic_boost snd_ctl_boolean_mono_info
-+static int tlv320a_get_mic_boost(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ ucontrol->value.integer.value[0] = ((g_analogpath & 0x1) == 1);
-+ return 0;
-+}
-+
-+static int tlv320a_put_mic_boost(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ int oldboost, newboost;
-+ u8 data;
-+ if (ucontrol->value.integer.value[0] == 1)
-+ newboost = 1;
-+ else
-+ newboost = 0;
-+ oldboost = g_analogpath & 0x1;
-+
-+ if (oldboost == newboost)
-+ return 0;
-+ data = (g_analogpath & 0xfe) | (newboost & 0x1);
-+ if (mcf_codec_spi_write(CODEC_ANALOG_APATH_REG, data) < 0)
-+ return -EINVAL;
-+ g_analogpath = data;
-+ return 1;
-+}
-+
-+static int tlv320a_info_capture_source(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ static char *texts[] = { "Line-In", "Microphone" };
-+
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-+ uinfo->count = 1;
-+ uinfo->value.enumerated.items = 2;
-+ if (uinfo->value.enumerated.item > 1)
-+ uinfo->value.enumerated.item = 1;
-+ strcpy(uinfo->value.enumerated.name,
-+ texts[uinfo->value.enumerated.item]);
-+ return 0;
-+}
-+
-+static int tlv320a_get_capture_source(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+
-+ ucontrol->value.enumerated.item[0] = ((g_analogpath & 0x4) == 0x4);
-+ return 0;
-+}
-+
-+static int tlv320a_put_capture_source(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ int oldinput, newinput;
-+ u8 data;
-+
-+ if (ucontrol->value.enumerated.item[0] > 1)
-+ return -EINVAL;
-+
-+ oldinput = (g_analogpath & 0x4) ? INPUT_MICROPHONE : INPUT_LINEIN;
-+
-+ if (ucontrol->value.enumerated.item[0])
-+ newinput = INPUT_MICROPHONE;
-+ else
-+ newinput = INPUT_LINEIN;
-+ if (oldinput == newinput)
-+ return 0;
-+ data = (g_analogpath & 0xfb) |
-+ (newinput == INPUT_MICROPHONE ? 0x4 : 0);
-+ if (mcf_codec_spi_write(CODEC_ANALOG_APATH_REG, data) < 0)
-+ return -EINVAL;
-+ g_analogpath = data;
-+ return 1;
-+}
-+
-+static struct snd_kcontrol_new tlv320_mixer_out __devinitdata = {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "play volume",
-+ .index = 0,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
-+ .info = tlv320a_info_out_volume,
-+ .get = tlv320a_get_out_volume,
-+ .put = tlv320a_put_out_volume,
-+};
-+
-+static struct snd_kcontrol_new tlv320_mixer_linein __devinitdata = {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "record volume",
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
-+ .info = tlv320a_info_linein_volume,
-+ .get = tlv320a_get_linein_volume,
-+ .put = tlv320a_put_linein_volume,
-+};
-+
-+static struct snd_kcontrol_new tlv320_mixer_capture_source __devinitdata = {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "record source",
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
-+ .info = tlv320a_info_capture_source,
-+ .get = tlv320a_get_capture_source,
-+ .put = tlv320a_put_capture_source,
-+};
-+
-+static struct snd_kcontrol_new tlv320_mixer_mic_boost __devinitdata = {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "mic Boost",
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
-+ .info = tlv320a_info_mic_boost,
-+ .get = tlv320a_get_mic_boost,
-+ .put = tlv320a_put_mic_boost,
-+};
-+
-+static int __devinit coldfire_alsa_audio_probe(struct platform_device *dev)
-+{
-+ struct snd_card *card;
-+ struct chip_spec *chip;
-+ int err;
-+
-+ err = snd_card_create(-1, id, THIS_MODULE,
-+ sizeof(struct chip_spec), &card);
-+ if (err < 0)
-+ return -ENOMEM;
-+
-+ chip = card->private_data;
-+
-+ chip->card = card;
-+ card->dev = &dev->dev;
-+
-+ err = snd_coldfire_new_pcm(chip);
-+ if (err < 0)
-+ return -ENOMEM;
-+
-+ strcpy(card->driver, "coldfire");
-+ strcpy(card->shortname, "Coldfire-TLV320A");
-+ sprintf(card->longname, "Freescale Coldfire with TLV320A");
-+
-+ err = snd_card_register(card);
-+ if (err == 0) {
-+ pr_debug(KERN_INFO "Coldfire audio support initialized\n");
-+ platform_set_drvdata(dev, card);
-+ }
-+
-+ strcpy(chip->card->mixername, "TLV320A Volume");
-+ err = snd_ctl_add(chip->card, snd_ctl_new1(&tlv320_mixer_out, chip));
-+ if (err)
-+ goto error;
-+ err = snd_ctl_add(chip->card, snd_ctl_new1(&tlv320_mixer_linein, chip));
-+ if (err)
-+ goto error;
-+ err = snd_ctl_add(chip->card,
-+ snd_ctl_new1(&tlv320_mixer_capture_source,
-+ chip));
-+ if (err)
-+ goto error;
-+ err = snd_ctl_add(chip->card,
-+ snd_ctl_new1(&tlv320_mixer_mic_boost,
-+ chip));
-+ if (err)
-+ goto error;
-+ g_mastervol = TLV320A_VOL_INIT;
-+ g_lineinvol = TLV320A_LINEIN_INIT;
-+ g_analogpath = TLV320A_ANALOGPATH_INIT;
-+ ssi_audio_codec_reset();
-+ return 0;
-+error:
-+ kfree(card->private_data);
-+ snd_card_free(card);
-+ platform_set_drvdata(dev, NULL);
-+ return err;
-+}
-+
-+static int coldfire_alsa_audio_remove(struct platform_device *dev)
-+{
-+ struct snd_card *card;
-+
-+ card = platform_get_drvdata(dev);
-+ kfree(card->private_data);
-+ snd_card_free(card);
-+ platform_set_drvdata(dev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver coldfire_alsa_audio_driver = {
-+ .probe = coldfire_alsa_audio_probe,
-+ .remove = coldfire_alsa_audio_remove,
-+ .driver = {
-+ .name = SOUND_CARD_NAME,
-+ },
-+};
-+
-+static int __init coldfire_alsa_audio_init(void)
-+{
-+ int err;
-+ err = platform_driver_register(&coldfire_alsa_audio_driver);
-+ if (err < 0)
-+ return err;
-+
-+ device = platform_device_register_simple(SOUND_CARD_NAME, -1, NULL, 0);
-+ if (!IS_ERR(device)) {
-+ if (platform_get_drvdata(device))
-+ return 0;
-+ platform_device_unregister(device);
-+ platform_driver_unregister(&coldfire_alsa_audio_driver);
-+ err = -ENODEV;
-+ } else
-+ err = PTR_ERR(device);
-+
-+ platform_driver_unregister(&coldfire_alsa_audio_driver);
-+ return err;
-+}
-+
-+static void __exit coldfire_alsa_audio_exit(void)
-+{
-+ platform_device_unregister(device);
-+ platform_driver_unregister(&coldfire_alsa_audio_driver);
-+}
-+
-+module_init(coldfire_alsa_audio_init);
-+module_exit(coldfire_alsa_audio_exit);
-+
-+MODULE_DESCRIPTION("Coldfire driver for ALSA");
-+MODULE_LICENSE("GPL");
-+MODULE_SUPPORTED_DEVICE("{{TLV320A}}");
-+
-+module_param(id, charp, 0444);
-+MODULE_PARM_DESC(id, "ID string for Coldfire + TLV320A soundcard.");
---- /dev/null
-+++ b/sound/coldfire/snd-coldfire.h
-@@ -0,0 +1,15 @@
-+/*
-+ * linux/sound/coldfire/snd-coldfire.h
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * ALSA driver for Coldfire SSI
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+extern int mcf_codec_spi_write(u8 addr, u16 data);
-+
diff --git a/target/linux/coldfire/patches/010-Add-SRAM-char-device-driver-support-for-MCF5445x.patch b/target/linux/coldfire/patches/010-Add-SRAM-char-device-driver-support-for-MCF5445x.patch
deleted file mode 100644
index ed0516f..0000000
--- a/target/linux/coldfire/patches/010-Add-SRAM-char-device-driver-support-for-MCF5445x.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From f54ba59d355f59e4c01b5b9c7dbc2d27b47302d2 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:41 +0800
-Subject: [PATCH 10/52] Add SRAM char device driver support for MCF5445x
-
-Created "/dev/sram" device file and implemented the sram mmap() operation to
-provide interface for userspace access.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/char/Kconfig | 11 ++++
- drivers/char/Makefile | 2 +
- drivers/char/sram.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 164 insertions(+), 0 deletions(-)
- create mode 100644 drivers/char/sram.c
-
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -97,6 +97,17 @@ config DEVKMEM
- kind of kernel debugging operations.
- When in doubt, say "N".
-
-+config DEVSRAM
-+ tristate "/dev/sram virtual device support"
-+ depends on M5445X
-+ default m
-+ help
-+ Say Y here if you want to suppot the SRAM char device. When in
-+ doubt, say "N".
-+
-+ It implements mmap system call to provide interface for
-+ user space access.
-+
- config BFIN_JTAG_COMM
- tristate "Blackfin JTAG Communication"
- depends on BLACKFIN
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -87,3 +87,5 @@ obj-$(CONFIG_RAMOOPS) += ramoops.o
-
- obj-$(CONFIG_JS_RTC) += js-rtc.o
- js-rtc-y = rtc.o
-+
-+obj-$(CONFIG_DEVSRAM) += sram.o
---- /dev/null
-+++ b/drivers/char/sram.c
-@@ -0,0 +1,151 @@
-+/*
-+ * linux/drivers/char/sram.c
-+ *
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Lanttor.Guo@freescale.com
-+ *
-+ * SRAM char device driver, implements mmap() system call to provide
-+ * interface for user space access.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/mm.h>
-+#include <linux/kdev_t.h>
-+#include <asm/page.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+
-+MODULE_LICENSE("GPL");
-+
-+static struct class *sram_class;
-+static int sram_major;
-+static int sram_minor;
-+static struct cdev sram_cdev;
-+
-+/*
-+ * Set up the cdev structure for sram.
-+ */
-+static void sram_setup_cdev(struct cdev *dev, int minor,
-+ const struct file_operations *fops)
-+{
-+ int err, devno = MKDEV(sram_major, minor);
-+
-+ cdev_init(dev, fops);
-+ dev->owner = THIS_MODULE;
-+ dev->ops = fops;
-+ err = cdev_add(dev, devno, 1);
-+ /* Fail gracefully if need be */
-+ if (err)
-+ printk(KERN_NOTICE "Error %d adding sram%d", err, minor);
-+}
-+
-+static int sram_open(struct inode *inode, struct file *filp)
-+{
-+ filp->f_mapping->backing_dev_info = &directly_mappable_cdev_bdi;
-+ return 0;
-+}
-+
-+static int sram_release(struct inode *inode, struct file *filp)
-+{
-+ return 0;
-+}
-+
-+void sram_vma_open(struct vm_area_struct *vma)
-+{
-+ printk(KERN_DEBUG "Sram VMA open, virt %lx, phys %lx\n",
-+ vma->vm_start,
-+ CONFIG_SRAM_BASE + (vma->vm_pgoff << PAGE_SHIFT));
-+}
-+
-+void sram_vma_close(struct vm_area_struct *vma)
-+{
-+ printk(KERN_DEBUG "Sram VMA close.\n");
-+}
-+
-+
-+static struct vm_operations_struct sram_remap_vm_ops = {
-+ .open = sram_vma_open,
-+ .close = sram_vma_close,
-+};
-+
-+static int sram_remap_mmap(struct file *filp, struct vm_area_struct *vma)
-+{
-+ size_t size = vma->vm_end - vma->vm_start;
-+
-+ if (PAGE_ALIGN(size) > CONFIG_SRAM_SIZE) {
-+ printk(KERN_ERR "required length exceed the size "
-+ "of physical sram (%x)\n", CONFIG_SRAM_SIZE);
-+ return -EAGAIN;
-+ }
-+
-+ if ((CONFIG_SRAM_BASE + (vma->vm_pgoff << PAGE_SHIFT) + size)
-+ > (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE)) {
-+ printk(KERN_ERR "required sram range exceed the size "
-+ "of phisical sram\n");
-+ return -EAGAIN;
-+ }
-+
-+ if (remap_pfn_range(vma, vma->vm_start,
-+ (CONFIG_SRAM_BASE >> PAGE_SHIFT) + vma->vm_pgoff,
-+ size,
-+ vma->vm_page_prot)) {
-+ printk(KERN_ERR "remap_pfn_range faile at %s()\n", __func__);
-+ return -EAGAIN;
-+ }
-+
-+ vma->vm_ops = &sram_remap_vm_ops;
-+ return 0;
-+}
-+
-+static const struct file_operations sram_ops = {
-+ .owner = THIS_MODULE,
-+ .open = sram_open,
-+ .release = sram_release,
-+ .mmap = sram_remap_mmap,
-+};
-+
-+static int __init sram_chrdev_init(void)
-+{
-+ int minor_devs = 1;
-+ int result;
-+ dev_t dev = 0;
-+ sram_minor = 0;
-+
-+ result = alloc_chrdev_region(&dev, sram_minor, minor_devs, "sram");
-+ sram_major = MAJOR(dev);
-+ if (result < 0) {
-+ printk(KERN_WARNING "sram: can't get major %d\n", sram_major);
-+ return result;
-+ }
-+
-+ sram_setup_cdev(&sram_cdev, 0, &sram_ops);
-+
-+ sram_class = class_create(THIS_MODULE, "sram");
-+ device_create(sram_class, NULL, MKDEV(sram_major, sram_minor),
-+ NULL, "sram");
-+
-+ return 0;
-+}
-+
-+static void sram_chrdev_cleanup(void)
-+{
-+ cdev_del(&sram_cdev);
-+ device_destroy(sram_class, MKDEV(sram_major, sram_minor));
-+ class_destroy(sram_class);
-+ unregister_chrdev_region(MKDEV(sram_major, 0), 1);
-+}
-+
-+module_init(sram_chrdev_init);
-+module_exit(sram_chrdev_cleanup);
diff --git a/target/linux/coldfire/patches/011-Add-CAU-driver-for-MCF5445x-and-MCF5441x.patch b/target/linux/coldfire/patches/011-Add-CAU-driver-for-MCF5445x-and-MCF5441x.patch
deleted file mode 100644
index 6608246..0000000
--- a/target/linux/coldfire/patches/011-Add-CAU-driver-for-MCF5445x-and-MCF5441x.patch
+++ /dev/null
@@ -1,2514 +0,0 @@
-From 0419eb27af72bd37c3ef926169fe4db90e8690d3 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:41 +0800
-Subject: [PATCH 11/52] Add CAU driver for MCF5445x and MCF5441x
-
-Add CAU driver support for MCF5445x and MCF5441x.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- crypto/testmgr.c | 13 +-
- drivers/crypto/Kconfig | 65 +++
- drivers/crypto/Makefile | 5 +
- drivers/crypto/mcfcau-aes.c | 367 ++++++++++++++++
- drivers/crypto/mcfcau-des.c | 525 +++++++++++++++++++++++
- drivers/crypto/mcfcau-md5.c | 972 ++++++++++++++++++++++++++++++++++++++++++
- drivers/crypto/mcfcau-sha1.c | 331 ++++++++++++++
- drivers/crypto/mcfcau.c | 33 ++
- drivers/crypto/mcfcau.h | 101 +++++
- 9 files changed, 2410 insertions(+), 2 deletions(-)
- create mode 100644 drivers/crypto/mcfcau-aes.c
- create mode 100644 drivers/crypto/mcfcau-des.c
- create mode 100644 drivers/crypto/mcfcau-md5.c
- create mode 100644 drivers/crypto/mcfcau-sha1.c
- create mode 100644 drivers/crypto/mcfcau.c
- create mode 100644 drivers/crypto/mcfcau.h
-
---- a/crypto/testmgr.c
-+++ b/crypto/testmgr.c
-@@ -705,6 +705,7 @@ static int test_cipher(struct crypto_cip
- else
- e = "decryption";
-
-+ printk(KERN_INFO "%s testing %s %s\n", __func__, algo, e);
- j = 0;
- for (i = 0; i < tcount; i++) {
- if (template[i].np)
-@@ -750,7 +751,9 @@ static int test_cipher(struct crypto_cip
- hexdump(q, template[i].rlen);
- ret = -EINVAL;
- goto out;
-- }
-+ } else
-+ printk(KERN_INFO "alg: cipher: Test %d pass "
-+ "on %s for %s\n", j, e, algo);
- }
-
- ret = 0;
-@@ -785,6 +788,7 @@ static int test_skcipher(struct crypto_a
- else
- e = "decryption";
-
-+ printk(KERN_INFO "%s testing %s %s\n", __func__, algo, e);
- init_completion(&result.completion);
-
- req = ablkcipher_request_alloc(tfm, GFP_KERNEL);
-@@ -863,10 +867,13 @@ static int test_skcipher(struct crypto_a
- hexdump(q, template[i].rlen);
- ret = -EINVAL;
- goto out;
-- }
-+ } else
-+ printk(KERN_INFO "alg: skcipher: Test %d "
-+ "pass on %s for %s\n", j, e, algo);
- }
- }
-
-+ printk(KERN_INFO "\ntesting %s %s across pages (chunking)\n", algo, e);
- j = 0;
- for (i = 0; i < tcount; i++) {
-
-@@ -2514,6 +2521,8 @@ int alg_test(const char *driver, const c
- int j;
- int rc;
-
-+ printk(KERN_INFO "\ntesting %s\n", alg);
-+
- if ((type & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_CIPHER) {
- char nalg[CRYPTO_MAX_ALG_NAME];
-
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -61,6 +61,71 @@ config CRYPTO_DEV_GEODE
- To compile this driver as a module, choose M here: the module
- will be called geode-aes.
-
-+config CRYPTO_DEV_MCFCAU
-+ bool "Support for Freescale Coldfire Cryptographic Acceleration Unit (CAU)"
-+ depends on M5445X || M5441X
-+ select CRYPTO_ALGAPI
-+ help
-+ The cryptographic acceleration unit (CAU) is a ColdFire coprocessor
-+ implementing a set of specialized operations in hardware. For example,
-+ you can find it on MCF5445X, or M5441X.
-+
-+ Say Y here if you want to use CAU.
-+
-+config CRYPTO_DEV_MCFCAU_DES
-+ tristate "DES and Triple DES cipher algorithms (coldfire)"
-+ depends on CRYPTO_DEV_MCFCAU
-+ select CRYPTO_ALGAPI
-+ select CRYPTO_BLKCIPHER
-+ help
-+ DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
-+
-+ Say 'Y' here to use the CAU coprocessor for
-+ the CryptoAPI DES and 3DES alogrithms.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called mcfcau-des.
-+
-+config CRYPTO_DEV_MCFCAU_AES
-+ tristate "AES cipher algorithm (coldfire)"
-+ depends on CRYPTO_DEV_MCFCAU
-+ select CRYPTO_ALGAPI
-+ select CRYPTO_BLKCIPHER
-+ help
-+ AES cipher algorithm (FIPS 197).
-+
-+ Say 'Y' here to use the CAU coprocessor for
-+ the CryptoAPI AES alogrithm.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called mcfcau-aes.
-+
-+config CRYPTO_DEV_MCFCAU_MD5
-+ tristate "MD5 digest algorithm (coldfire)"
-+ depends on CRYPTO_DEV_MCFCAU
-+ select CRYPTO_ALGAPI
-+ help
-+ MD5 message digest algorithm (RFC1321).
-+
-+ Say 'Y' here to use the CAU coprocessor for
-+ the CryptoAPI MD5 alogrithm.
-+
-+ To compile this driver as a module, choose M here:
-+ the module will be called mcfcau-md5.
-+
-+config CRYPTO_DEV_MCFCAU_SHA1
-+ tristate "SHA1 digest algorithm (coldfire)"
-+ depends on CRYPTO_DEV_MCFCAU
-+ select CRYPTO_ALGAPI
-+ help
-+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
-+
-+ Say 'Y' here to use the CAU coprocessor for
-+ the CryptoAPI SHA1 alogrithm.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called mcfcau-sha1.
-+
- config ZCRYPT
- tristate "Support for PCI-attached cryptographic adapters"
- depends on S390
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -7,6 +7,11 @@ obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hi
- obj-$(CONFIG_CRYPTO_DEV_MV_CESA) += mv_cesa.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU) += mcfcau.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_DES) += mcfcau-des.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_AES) += mcfcau-aes.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_MD5) += mcfcau-md5.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_SHA1) += mcfcau-sha1.o
- obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
- obj-$(CONFIG_CRYPTO_DEV_OMAP_SHAM) += omap-sham.o
- obj-$(CONFIG_CRYPTO_DEV_OMAP_AES) += omap-aes.o
---- /dev/null
-+++ b/drivers/crypto/mcfcau-aes.c
-@@ -0,0 +1,367 @@
-+/***************************************************************************
-+ * mcfcau-aes.c - Implementation of AES Cipher Algorithm
-+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01 17 September 2007 Andrey Butok
-+ * Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/crypto.h>
-+
-+/*
-+#undef DEBUG
-+#define DEBUG 1
-+*/
-+
-+#include "mcfcau.h"
-+
-+#define MCFCAU_AES_MIN_KEY_SIZE (16)
-+#define MCFCAU_AES_MAX_KEY_SIZE (32)
-+#define MCFCAU_AES_BLOCK_SIZE (16)
-+
-+#define MCFCAU_AES_DRIVER_DESC "AES ColdFire CAU driver"
-+#define MCFCAU_AES_DRIVER_VERSION "v0.01"
-+
-+struct mcfcau_aes_ctx {
-+ int Nr_1;
-+ u32 buf[120];
-+ u32 buf_tmp[16];
-+};
-+
-+static u32 mcfcau_rco_tab[10]
-+ = { 0x01000000, 0x02000000, 0x04000000, 0x08000000,
-+ 0x10000000, 0x20000000, 0x40000000, 0x80000000,
-+ 0x1b000000, 0x36000000};
-+
-+int mcfcau_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
-+ unsigned int key_len)
-+{
-+ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-+ const u32 *key = (const u32 *)in_key;
-+ u32 *flags = &tfm->crt_flags;
-+ u32 i;
-+ u32 *key_sch = (&ctx->buf[0]);
-+ u32 *temp_p, *rcon_p;
-+ u32 Nx;
-+ u32 Nk;
-+ unsigned long iflags;
-+
-+ DBG("mcfcau_aes_setkey\n");
-+
-+ if (key_len % 8) {
-+ *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-+ return -EINVAL;
-+ }
-+
-+ Nk = key_len>>2;
-+
-+ for (i = 0; i < Nk; i++)
-+ key_sch[i] = key[i];
-+
-+ ctx->Nr_1 = Nk+5;
-+
-+ /* Key Expansion */
-+ temp_p = &key_sch[Nk-1];
-+ rcon_p = &mcfcau_rco_tab[0];
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+ asm volatile ("move.l %0, %%a1"
-+ : : "m"(temp_p) : "a1");
-+ asm volatile ("move.l %0, %%a3"
-+ : : "m"(rcon_p) : "a3");
-+ asm volatile ("move.l %0, %%a4"
-+ : : "m"(key_sch) : "a4");
-+
-+ Nx = (Nk+7)<<2; /* (Nr+1)*Nb */
-+
-+ for (i = Nk; i < Nx; i++) {
-+ /* temp = key_sch[Nk-1] */
-+ asm volatile ("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CAA) : "a1");
-+
-+ if (i % Nk == 0) {
-+ asm volatile ("moveq #8, %%d0" : : : "d0");
-+ /* CAA=RotWord(temp) */
-+ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA) : "d0");
-+ /* SubWord(CAA) */
-+ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESS+MCFCAU_CAA));
-+ /* ACC xor rcon[i/Nk] */
-+ asm volatile ("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CAA) : "a3");
-+
-+ } else if ((Nk > 6) && (i % Nk == 4)) {
-+ /* SubWord(ACC) */
-+ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESS+MCFCAU_CAA));
-+ }
-+
-+ /* key_sch[i]^=key_sch[i-Nk]; store ACC to key_sch[i] */
-+ asm volatile ("cp0ld.l (%%a4)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CAA) : "a4");
-+ asm volatile ("cp0st.l %%d0,(%%a1),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CAA));
-+ }
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+
-+ return 0;
-+}
-+
-+
-+/* encrypt a block of text */
-+static void mcfcau_aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-+{
-+ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-+ const int Nr_1 = ctx->Nr_1;
-+
-+ u32 *key_sch = &(ctx->buf[0]);
-+ u32 i;
-+ unsigned long iflags;
-+
-+ DBG("mcfcau_aes_encrypt\n");
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+ asm("move.l %0, %%a1" : : "m"(in) : "a1");
-+ asm("move.l %0, %%a0" : : "m"(key_sch) : "a0");
-+ /* state=in */
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA2) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA3) : "a1");
-+ /* AddRoundKey() */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA0) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA1) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA3) : "a0");
-+
-+ for (i = Nr_1; i > 0; i--) {
-+ /* SubBytes(state) */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESS+MCFCAU_CA0));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESS+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESS+MCFCAU_CA2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESS+MCFCAU_CA3));
-+ /* ShiftRows(state) */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESR));
-+ /* MixColumns(state); AddRoundKey() */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESC+MCFCAU_CA0) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESC+MCFCAU_CA1) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESC+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESC+MCFCAU_CA3) : "a0");
-+ }
-+ /* SubBytes(state)*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESS+MCFCAU_CA0));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESS+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESS+MCFCAU_CA2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESS+MCFCAU_CA3));
-+ /* ShiftRows(state) */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESR));
-+ /* AddRoundKey() */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA0) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA1) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA3) : "a0");
-+ /* out = state */
-+ asm("move.l %0, %%a1" : : "m"(out) : "a1");
-+ asm("cp0st.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA0) : "d0");
-+ asm("cp0st.l %%d0,%%d1,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA1) : "d1");
-+
-+ asm("move.l %%d0,(%%a1)+" : : : "a1");
-+ asm("move.l %%d1,(%%a1)+" : : : "a1");
-+
-+ asm("cp0st.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA2) : "d0");
-+ asm("cp0st.l %%d0,%%d1,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA3) : "d1");
-+
-+ asm("move.l %%d0,(%%a1)+" : : : "a1");
-+ asm("move.l %%d1,(%%a1)+" : : : "a1");
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+
-+/* decrypt a block of text */
-+static void mcfcau_aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-+{
-+ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-+ u32 *key_sch = &(ctx->buf[0]);
-+ u32 i;
-+ unsigned long iflags;
-+ const int Nr_1 = ctx->Nr_1;
-+ key_sch = &key_sch[(Nr_1+2)*4];
-+
-+ DBG("mcfcau_aes_decrypt\n");
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+ asm("move.l %0, %%a1" : : "m"(in) : "a1");
-+ asm("move.l %0, %%a0" : : "m"(key_sch) : "a0");
-+ /* state=in */
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA2) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA3) : "a1");
-+ /* AddRoundKey() */
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA3) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA1) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA0) : "a0");
-+
-+ for (i = Nr_1; i > 0; i--) {
-+ /* InvShiftRows(state) */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIR));
-+ /* InvSubBytes(state) */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIS+MCFCAU_CA3));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIS+MCFCAU_CA2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIS+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIS+MCFCAU_CA0));
-+ /* InvMixColumns(state); AddRoundKey() */
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIC+MCFCAU_CA3) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIC+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIC+MCFCAU_CA1) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_AESIC+MCFCAU_CA0) : "a0");
-+ }
-+ /* InvShiftRows(state) */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESIR));
-+ /* InvSubBytes(state)*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESIS+MCFCAU_CA3));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESIS+MCFCAU_CA2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESIS+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_AESIS+MCFCAU_CA0));
-+ /* AddRoundKey() */
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA3) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA1) : "a0");
-+ asm("cp0ld.l -(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA0) : "a0");
-+ /* out = state */
-+ asm("move.l %0, %%a1" : : "m"(out) : "a1");
-+ asm("cp0st.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_STR+MCFCAU_CA0) : "d0");
-+ asm("cp0st.l %%d0,%%d1,#1,%0" : : "n"(MCFCAU_STR+MCFCAU_CA1) : "d1");
-+
-+ asm("move.l %%d0,(%%a1)+" : : : "a1");
-+ asm("move.l %%d1,(%%a1)+" : : : "a1");
-+
-+ asm("cp0st.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_STR+MCFCAU_CA2) : "d0");
-+ asm("cp0st.l %%d0,%%d1,#1,%0" : : "n"(MCFCAU_STR+MCFCAU_CA3) : "d1");
-+
-+ asm("move.l %%d0,(%%a1)+" : : : "a1");
-+ asm("move.l %%d1,(%%a1)+" : : : "a1");
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+
-+}
-+
-+
-+static struct crypto_alg mcfcau_aes_alg = {
-+ .cra_name = "aes",
-+ .cra_driver_name = "aes-mcfcau",
-+ .cra_priority = MCFCAU_CRA_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
-+ .cra_blocksize = MCFCAU_AES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct mcfcau_aes_ctx),
-+ .cra_alignmask = 3,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(mcfcau_aes_alg.cra_list),
-+ .cra_u = {
-+ .cipher = {
-+ .cia_min_keysize = MCFCAU_AES_MIN_KEY_SIZE,
-+ .cia_max_keysize = MCFCAU_AES_MAX_KEY_SIZE,
-+ .cia_setkey = mcfcau_aes_setkey,
-+ .cia_encrypt = mcfcau_aes_encrypt,
-+ .cia_decrypt = mcfcau_aes_decrypt
-+ }
-+ }
-+};
-+
-+static int __init mcfcau_aes_init(void)
-+{
-+ int ret = crypto_register_alg(&mcfcau_aes_alg);
-+
-+ printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " "
-+ MCFCAU_AES_DRIVER_VERSION " %s.\n",
-+ ret ? "failed" : "registered");
-+ return ret;
-+}
-+
-+static void __exit mcfcau_aes_fini(void)
-+{
-+ crypto_unregister_alg(&mcfcau_aes_alg);
-+ printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " "
-+ MCFCAU_AES_DRIVER_VERSION " unregistered.\n");
-+}
-+
-+module_init(mcfcau_aes_init);
-+module_exit(mcfcau_aes_fini);
-+
-+MODULE_DESCRIPTION(MCFCAU_AES_DRIVER_DESC);
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_AUTHOR("Andrey Butok");
---- /dev/null
-+++ b/drivers/crypto/mcfcau-des.c
-@@ -0,0 +1,525 @@
-+/***************************************************************************
-+ * mcfcau-des.c - Implementation of DES & Triple DES EDE Cipher Algorithms
-+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01 14 August 2007 Andrey Butok
-+ * Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/crypto.h>
-+#include <linux/types.h>
-+
-+/*
-+#undef DEBUG
-+#define DEBUG 1
-+*/
-+
-+#include "mcfcau.h"
-+
-+#define MCFCAU_DES_KEY_SIZE (8)
-+#define MCFCAU_DES_EXPKEY_WORDS (32)
-+#define MCFCAU_DES_BLOCK_SIZE (8)
-+
-+#define MCFCAU_DES3_EDE_KEY_SIZE (3 * MCFCAU_DES_KEY_SIZE)
-+#define MCFCAU_DES3_EDE_EXPKEY_WORDS (3 * MCFCAU_DES_EXPKEY_WORDS)
-+#define MCFCAU_DES3_EDE_BLOCK_SIZE (MCFCAU_DES_BLOCK_SIZE)
-+
-+#define MCFCAU_DES_DRIVER_DESC "DES & 3DES ColdFire CAU driver"
-+#define MCFCAU_DES_DRIVER_VERSION "v0.01"
-+
-+struct mcfcau_des_ctx {
-+ u32 expkey[MCFCAU_DES_EXPKEY_WORDS];
-+};
-+
-+struct mcfcau_des3_ede_ctx {
-+ u32 expkey[MCFCAU_DES3_EDE_EXPKEY_WORDS];
-+};
-+
-+/* DES round operations */
-+static inline void mcfcau_des_encipher(void)
-+{
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESK));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSL1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSL1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1));
-+}
-+
-+static inline void mcfcau_des_decipher(void)
-+{
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESK+MCFCAU_DC));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSR1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR2));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_KSR1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1));
-+}
-+
-+
-+static int mcfcau_des_setkey(struct crypto_tfm *tfm, const u8 *key_p,
-+ unsigned int keylen)
-+{
-+ struct mcfcau_des_ctx *dctx = crypto_tfm_ctx(tfm);
-+ u32 *flags = &tfm->crt_flags;
-+ u32 * key = (u32 *) key_p;
-+
-+ DBG("mcfcau_des_setkey\n");
-+
-+ /*
-+ * RFC2451: Weak key checks SHOULD be performed.
-+ *
-+ * FIPS 74:
-+ * Keys having duals are keys which produce all zeros, all ones, or
-+ * alternating zero-one patterns in the C and D registers
-+ * after Permuted
-+ * Choice 1 has operated on the key.
-+ *
-+ */
-+ if (*flags & CRYPTO_TFM_REQ_WEAK_KEY) { /* FIPS 74 */
-+ if (key[0] < 0xE001E00l) {
-+ if (key[0] < 0x1FE01FE0) {
-+ if (key[0] < 0x01E001E0) {
-+ if (((key[0] == 0x01010101) &&
-+ (key[1] == 0x01010101)) ||
-+ ((key[0] == 0x011F011F) &&
-+ (key[1] == 0x010E010E)))
-+ goto WEAK_KEY;
-+ } else {
-+ if (((key[0] == 0x01E001E0) &&
-+ (key[1] == 0x01F101F1)) ||
-+ ((key[0] == 0x01FE01FE) &&
-+ (key[1] == 0x01FE01FE)))
-+ goto WEAK_KEY;
-+ }
-+ } else {
-+ if (key[0] < 0x1F1F1F1F) {
-+ if (((key[0] == 0x1FE01FE0) &&
-+ (key[1] == 0x0EF10EF1)) ||
-+ ((key[0] == 0x1F011F0l) &&
-+ (key[1] == 0x0E010E01)))
-+ goto WEAK_KEY;
-+ } else{
-+ if (((key[0] == 0x1F1F1F1F) &&
-+ (key[1] == 0x0E0E0E0E)) ||
-+ ((key[0] == 0x1FFE1FFE) &&
-+ (key[1] == 0x0EFE0EFE)))
-+ goto WEAK_KEY;
-+ }
-+ }
-+ } else {
-+ if (key[0] < 0xFE01FE01) {
-+ if (key[0] < 0xE0E0E0E0) {
-+ if (((key[0] == 0xE001E00l) &&
-+ (key[1] == 0xF101F101)) ||
-+ ((key[0] == 0xE01FE01F) &&
-+ (key[1] == 0xF10EF10E)))
-+ goto WEAK_KEY;
-+ } else {
-+ if (((key[0] == 0xE0E0E0E0) &&
-+ (key[1] == 0xF1F1F1F1)) ||
-+ ((key[0] == 0xE0FEE0FE) &&
-+ (key[1] == 0xF1FEF1FE)))
-+ goto WEAK_KEY;
-+ }
-+ } else {
-+ if (key[0] < 0xFEE0FEE0) {
-+ if (((key[0] == 0xFE01FE01) &&
-+ (key[1] == 0xFE01FE01)) ||
-+ ((key[0] == 0xFE1FFE1F) &&
-+ (key[1] == 0xFE0EFE0E)))
-+ goto WEAK_KEY;
-+ } else {
-+ if (((key[0] == 0xFEE0FEE0) &&
-+ (key[1] == 0xFEF1FEF1)) ||
-+ ((key[0] == 0xFEFEFEFE)
-+ && (key[1] == 0xFEFEFEFE)))
-+ goto WEAK_KEY;
-+ }
-+ }
-+ }
-+ }
-+ memcpy(dctx->expkey, key_p, keylen);
-+ return 0;
-+WEAK_KEY:
-+ *flags |= CRYPTO_TFM_RES_WEAK_KEY;
-+ return -EINVAL;
-+}
-+
-+
-+void mcfcau_des_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+ struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm);
-+ u32 *des_key_tmp = ctx->expkey;
-+ unsigned long iflags;
-+
-+ DBG("mcfcau_des_encrypt\n");
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+ asm("move.l %0, %%a0" : : "m"(src) : "a0");
-+ asm("move.l %0, %%a1" : : "m"(des_key_tmp) : "a1");
-+
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA3));
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+ mcfcau_des_encipher();
-+
-+ asm("cp0st.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA2) : "d0");
-+ asm("cp0st.l %%d0,%%d1,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA3) : "d1");
-+ asm("move.l %0, %%a1" : : "m"(dst) : "a1");
-+ asm("move.l %d0,(%a1)+");
-+ asm("move.l %d1,(%a1)");
-+
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+
-+void mcfcau_des_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+ struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm);
-+ u32 *des_key_tmp = ctx->expkey;
-+ unsigned long iflags;
-+
-+ DBG("mcfcau_des_decrypt\n");
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+ asm("move.l %0, %%a0" : : "m"(src) : "a0");
-+ asm("move.l %0, %%a1" : : "m"(des_key_tmp) : "a1");
-+
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA3));
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+ mcfcau_des_decipher();
-+
-+ asm("move.l %0, %%a1" : : "m"(dst) : "a1");
-+ asm("cp0st.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA2) : "d0");
-+ asm("cp0st.l %%d0,%%d1,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA3) : "d1");
-+ asm("move.l %d0,(%a1)+");
-+ asm("move.l %d1,(%a1)");
-+
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+
-+/*
-+ * RFC2451:
-+ *
-+ * For DES-EDE3, there is no known need to reject weak or
-+ * complementation keys. Any weakness is obviated by the use of
-+ * multiple keys.
-+ *
-+ * However, if the first two or last two independent 64-bit keys are
-+ * equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the
-+ * same as DES. Implementers MUST reject keys that exhibit this
-+ * property.
-+ *
-+ */
-+
-+static int mcfcau_des3_ede_setkey(
-+ struct crypto_tfm *tfm, const u8 *key_p, unsigned int keylen)
-+{
-+ const u32 *key = (const u32 *)key_p;
-+ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
-+ u32 *flags = &tfm->crt_flags;
-+
-+ DBG("mcfcau_des3_ede_setkey\n");
-+
-+ if (unlikely(!((key[0] ^ key[2]) | (key[1] ^ key[3])) ||
-+ !((key[2] ^ key[4]) | (key[3] ^ key[5])))) {
-+ *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
-+ return -EINVAL;
-+ }
-+
-+ memcpy(dctx->expkey, key_p, keylen);
-+
-+ return 0;
-+}
-+
-+static void mcfcau_des3_ede_encrypt(
-+ struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
-+ const u32 *des_key_tmp = dctx->expkey;
-+ unsigned long iflags;
-+
-+ DBG("mcfcau_des3_ede_encrypt\n");
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+ /*EK1*/
-+ asm("move.l %0, %%a0"
-+ : : "m"(src) : "a0");
-+ asm("move.l %0, %%a1"
-+ : : "m"(des_key_tmp) : "a1");
-+
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA3));
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1) : "a1");
-+
-+ mcfcau_des_encipher();
-+
-+ /*DK2*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1) : "a1");
-+
-+ mcfcau_des_decipher();
-+
-+ /*EK3*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+ mcfcau_des_encipher();
-+
-+ asm("move.l %0, %%a1"
-+ : : "m"(dst) : "a1");
-+ asm("cp0st.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA2) : "d0");
-+ asm("cp0st.l %%d0,%%d1,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA3) : "d1");
-+ asm("move.l %d0,(%a1)+");
-+ asm("move.l %d1,(%a1)");
-+
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+static void mcfcau_des3_ede_decrypt(
-+ struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
-+ const u32 *des_key_tmp = dctx->expkey + 6 - 2;
-+ unsigned long iflags;
-+
-+ DBG("mcfcau_des3_ede_decrypt\n");
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+ /*DK3*/
-+ asm("move.l %0, %%a0"
-+ : : "m"(src) : "a0");
-+ asm("move.l %0, %%a1"
-+ : : "m"(des_key_tmp) : "a1");
-+
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA2) : "a0");
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA3));
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+ mcfcau_des_decipher();
-+
-+ /*EK2*/
-+ asm("suba.l #12,%a1"); /*dec key pointer*/
-+
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+ mcfcau_des_encipher();
-+
-+ /*DK1*/
-+ asm("suba.l #12,%a1"); /*dec key pointer*/
-+
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a1");
-+ asm("cp0ld.l (%%a1),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+ mcfcau_des_decipher();
-+
-+ asm("move.l %0, %%a1"
-+ : : "m"(dst) : "a1");
-+ asm("cp0st.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA2) : "d0");
-+ asm("cp0st.l %%d0,%%d1,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA3) : "d1");
-+ asm("move.l %d0,(%a1)+");
-+ asm("move.l %d1,(%a1)");
-+
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+
-+static struct crypto_alg mcfcau_des_alg = {
-+ .cra_name = "des",
-+ .cra_driver_name = "des-mcfcau",
-+ .cra_priority = MCFCAU_CRA_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
-+ .cra_blocksize = MCFCAU_DES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct mcfcau_des_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_alignmask = 3,
-+ .cra_list = LIST_HEAD_INIT(mcfcau_des_alg.cra_list),
-+ .cra_u = { .cipher = {
-+ .cia_min_keysize = MCFCAU_DES_KEY_SIZE,
-+ .cia_max_keysize = MCFCAU_DES_KEY_SIZE,
-+ .cia_setkey = mcfcau_des_setkey,
-+ .cia_encrypt = mcfcau_des_encrypt,
-+ .cia_decrypt = mcfcau_des_decrypt } }
-+};
-+
-+static struct crypto_alg mcfcau_des3_ede_alg = {
-+ .cra_name = "des3_ede",
-+ .cra_driver_name = "des3_ede-mcfcau",
-+ .cra_priority = MCFCAU_CRA_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
-+ .cra_blocksize = MCFCAU_DES3_EDE_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct mcfcau_des3_ede_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_alignmask = 3,
-+ .cra_list =
-+ LIST_HEAD_INIT(mcfcau_des3_ede_alg.cra_list),
-+ .cra_u = { .cipher = {
-+ .cia_min_keysize = MCFCAU_DES3_EDE_KEY_SIZE,
-+ .cia_max_keysize = MCFCAU_DES3_EDE_KEY_SIZE,
-+ .cia_setkey = mcfcau_des3_ede_setkey,
-+ .cia_encrypt = mcfcau_des3_ede_encrypt,
-+ .cia_decrypt = mcfcau_des3_ede_decrypt } }
-+};
-+
-+MODULE_ALIAS("mcfcau_des3_ede");
-+
-+static int __init mcfcau_des_init(void)
-+{
-+ int ret;
-+
-+ ret = crypto_register_alg(&mcfcau_des_alg);
-+ if (ret < 0)
-+ goto out;
-+
-+ ret = crypto_register_alg(&mcfcau_des3_ede_alg);
-+ if (ret < 0)
-+ crypto_unregister_alg(&mcfcau_des_alg);
-+out:
-+ printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " "
-+ MCFCAU_DES_DRIVER_VERSION " %s.\n",
-+ ret ? "failed" : "registered");
-+ return ret;
-+}
-+
-+static void __exit mcfcau_des_exit(void)
-+{
-+ crypto_unregister_alg(&mcfcau_des3_ede_alg);
-+ crypto_unregister_alg(&mcfcau_des_alg);
-+
-+ printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " "
-+ MCFCAU_DES_DRIVER_VERSION " unregistered.\n");
-+}
-+
-+module_init(mcfcau_des_init);
-+module_exit(mcfcau_des_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms for ColdFire CAU");
-+MODULE_AUTHOR("Andrey Butok");
---- /dev/null
-+++ b/drivers/crypto/mcfcau-md5.c
-@@ -0,0 +1,972 @@
-+/***************************************************************************
-+ * mcfcau-md5.c - Implementation of MD5 Message Digest Algorithm (RFC1321)
-+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ * Shrek Wu B16972@freescale.com
-+ * Alison Wang b18965@freescale.com
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01 30 September 2007 Andrey Butok
-+ * Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/string.h>
-+#include <linux/crypto.h>
-+#include <linux/types.h>
-+#include <crypto/algapi.h>
-+#include <crypto/hash.h>
-+#include <crypto/internal/hash.h>
-+#include <asm/byteorder.h>
-+
-+#include "mcfcau.h"
-+
-+#define MCFCAU_MD5_DIGEST_SIZE (16)
-+#define MCFCAU_MD5_HMAC_BLOCK_SIZE (64)
-+#define MCFCAU_MD5_BLOCK_WORDS (16)
-+#define MCFCAU_MD5_HASH_WORDS (4)
-+
-+#define MCFCAU_MD5_DRIVER_DESC "MD5 ColdFire CAU driver"
-+#define MCFCAU_MD5_DRIVER_VERSION "v0.01"
-+
-+
-+struct mcfcau_md5_ctx {
-+ u32 hash[MCFCAU_MD5_HASH_WORDS];
-+ u32 block[MCFCAU_MD5_BLOCK_WORDS];
-+ u64 byte_count;
-+};
-+
-+u32 mcfcau_md5_t[64] = {0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee,
-+ 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501,
-+ 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be,
-+ 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821,
-+ 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa,
-+ 0xd62f105d, 0x02441453, 0xd8a1e681, 0xe7d3fbc8,
-+ 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed,
-+ 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a,
-+ 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c,
-+ 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70,
-+ 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x04881d05,
-+ 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665,
-+ 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039,
-+ 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1,
-+ 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1,
-+ 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391};
-+
-+
-+
-+static void mcfcau_md5_transform(u32 *hash, u32 const *in)
-+{
-+ int i;
-+ u32 *md5_t_p = &mcfcau_md5_t[0];
-+ unsigned long iflags;
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+ asm("move.l %0, %%a1" : : "m"(hash) : "a1");
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CAA) : "a1");/*a*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1) : "a1");/*b*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA2) : "a1");/*c*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA3) : "a1");/*d*/
-+ asm("move.l %0, %%a0" : : "m"(in) : "a0"); /* X[] */
-+ asm("move.l %0, %%a3" : : "m"(md5_t_p) : "a3"); /* T[] */
-+
-+ /* Round 1 */
-+ asm("moveq.l #7, %%d4" : : : "d4"); /* for rotating by 7 */
-+ asm("moveq.l #12, %%d5" : : : "d5"); /* for rotating by 12 */
-+ asm("moveq.l #17, %%d6" : : : "d6"); /* for rotating by 17 */
-+ asm("moveq.l #22, %%d7" : : : "d7"); /* for rotating by 22 */
-+
-+ for (i = 0; i < 4; i++) {
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFF));
-+ /* a+F(b,c,d) */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ /* add byterev x[i] */
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ /* add t[i] */
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ /* rotate by 7 */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ /* add b */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+ /* register to register shift */
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFF));
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFF));
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFF));
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+ };
-+
-+
-+ /* Round 2 */
-+ asm("moveq.l #5, %%d4" : : : "d4"); /* for rotating by 5 */
-+ asm("moveq.l #9, %%d5" : : : "d5"); /* for rotating by 9 */
-+ asm("moveq.l #14, %%d6" : : : "d6"); /* for rotating by 14 */
-+ asm("moveq.l #20, %%d7" : : : "d7"); /* for rotating by 20 */
-+
-+ asm("lea -60(%%a0),%%a0" : : : "a0");
-+
-+ for (i = 0; i < 2; i++) {
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 20(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 20(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -44(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 20(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+ };
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 20(%%a0),%%a0"
-+ : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -44(%%a0),%%a0"
-+ : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 20(%%a0),%%a0"
-+ : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 20(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -44(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 20(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 20(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFG));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ /* Round 3 */
-+ asm("moveq.l #4, %%d4" : : : "d4"); /* for rotating by 5 */
-+ asm("moveq.l #11, %%d5" : : : "d5"); /* for rotating by 9 */
-+ asm("moveq.l #16, %%d6" : : : "d6"); /* for rotating by 14 */
-+ asm("moveq.l #23, %%d7" : : : "d7"); /* for rotating by 20 */
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0" : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -52(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -52(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 12(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -52(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -8(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ /* Round 4 */
-+ asm("moveq.l #6, %%d4" : : : "d4"); /* for rotating by 6 */
-+ asm("moveq.l #10, %%d5" : : : "d5"); /* for rotating by 10 */
-+ asm("moveq.l #15, %%d6" : : : "d6"); /* for rotating by 15 */
-+ asm("moveq.l #21, %%d7" : : : "d7"); /* for rotating by 21 */
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -36(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -36(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -36(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -36(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -36(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0"
-+ : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d4,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea -36(%%a0),%%a0"
-+ : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d5,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0"
-+ : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d6,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFI));
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_RADR+MCFCAU_CAA) : "a0");
-+ asm("lea 28(%%a0),%%a0" : : : "a0");
-+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a3");
-+ asm("cp0ld.l %%d7,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA1));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MDS));
-+
-+
-+ asm("move.l %0, %%a1" : : "m"(hash) : "a1");
-+
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a1");/*a*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CA1) : "a1");/*b*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CA2) : "a1");/*c*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CA3) : "a1");/*d*/
-+
-+ asm("cp0st.l %%d0,-(%%a1),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA3) : "a1");/*d*/
-+ asm("cp0st.l %%d0,-(%%a1),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA2) : "a1");/*c*/
-+ asm("cp0st.l %%d0,-(%%a1),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA1) : "a1");/*b*/
-+ asm("cp0st.l %%d0,-(%%a1),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CAA) : "a1");/*a*/
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+static inline void le32_to_cpu_array(u32 *buf, unsigned int words)
-+{
-+ while (words--) {
-+ __le32_to_cpus(buf);
-+ buf++;
-+ }
-+}
-+
-+static inline void cpu_to_le32_array(u32 *buf, unsigned int words)
-+{
-+ while (words--) {
-+ __cpu_to_le32s(buf);
-+ buf++;
-+ }
-+}
-+
-+static int mcfcau_md5_initialization(struct shash_desc *desc)
-+{
-+ struct mcfcau_md5_ctx *mctx = shash_desc_ctx(desc);
-+
-+ DBG("mcfcau_md5_initialization\n");
-+ mctx->hash[0] = 0x67452301;
-+ mctx->hash[1] = 0xefcdab89;
-+ mctx->hash[2] = 0x98badcfe;
-+ mctx->hash[3] = 0x10325476;
-+ mctx->byte_count = 0;
-+
-+ return 0;
-+}
-+
-+static int mcfcau_md5_update(struct shash_desc *desc,
-+ const u8 *data, unsigned int len)
-+{
-+ struct mcfcau_md5_ctx *mctx = shash_desc_ctx(desc);
-+ const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
-+
-+ DBG("mcfcau_md5_update\n");
-+ mctx->byte_count += len;
-+
-+ if (avail > len) {
-+ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
-+ data, len);
-+ } else {
-+ memcpy((char *)mctx->block +
-+ (sizeof(mctx->block) - avail), data, avail);
-+
-+ mcfcau_md5_transform(mctx->hash, mctx->block);
-+ data += avail;
-+ len -= avail;
-+
-+ while (len >= sizeof(mctx->block)) {
-+ memcpy(mctx->block, data, sizeof(mctx->block));
-+ mcfcau_md5_transform(mctx->hash, mctx->block);
-+ data += sizeof(mctx->block);
-+ len -= sizeof(mctx->block);
-+ }
-+
-+ memcpy(mctx->block, data, len);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mcfcau_md5_final(struct shash_desc *desc, u8 *out)
-+{
-+ struct mcfcau_md5_ctx *mctx = shash_desc_ctx(desc);
-+ const unsigned int offset = mctx->byte_count & 0x3f;
-+ char *p = (char *)mctx->block + offset;
-+ int padding = 56 - (offset + 1);
-+
-+ DBG("mcfcau_md5_final\n");
-+
-+ *p++ = 0x80;
-+ if (padding < 0) {
-+ memset(p, 0x00, padding + sizeof(u64));
-+ mcfcau_md5_transform(mctx->hash, mctx->block);
-+ p = (char *)mctx->block;
-+ padding = 56;
-+ }
-+
-+ memset(p, 0, padding);
-+ mctx->block[14] = mctx->byte_count << 3;
-+ mctx->block[15] = mctx->byte_count >> 29;
-+ le32_to_cpu_array(&mctx->block[14], 2);
-+
-+ mcfcau_md5_transform(mctx->hash, mctx->block);
-+
-+ cpu_to_le32_array(mctx->hash, sizeof(mctx->hash) / sizeof(u32));
-+ memcpy(out, mctx->hash, sizeof(mctx->hash));
-+ memset(mctx, 0, sizeof(*mctx));
-+
-+ return 0;
-+}
-+
-+static struct shash_alg mcfcau_md5_alg = {
-+ .init = mcfcau_md5_initialization,
-+ .update = mcfcau_md5_update,
-+ .final = mcfcau_md5_final,
-+ .digestsize = MCFCAU_MD5_DIGEST_SIZE,
-+ .descsize = sizeof(struct mcfcau_md5_ctx),
-+ .statesize = sizeof(struct mcfcau_md5_ctx),
-+ .base = {
-+ .cra_name = "md5",
-+ .cra_driver_name = "md5-mcfcau",
-+ .cra_blocksize = MCFCAU_MD5_HMAC_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
-+ .cra_priority = MCFCAU_CRA_PRIORITY,
-+ .cra_module = THIS_MODULE
-+ }
-+};
-+
-+static int __init mcfcau_md5_init(void)
-+{
-+ int ret = 0;
-+
-+ ret = crypto_register_shash(&mcfcau_md5_alg);
-+ printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " "
-+ MCFCAU_MD5_DRIVER_VERSION " %s.\n",
-+ ret ? "failed" : "registered");
-+ return ret;
-+}
-+
-+static void __exit mcfcau_md5_exit(void)
-+{
-+ crypto_unregister_shash(&mcfcau_md5_alg);
-+ printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " "
-+ MCFCAU_MD5_DRIVER_VERSION " unregistered.\n");
-+}
-+
-+module_init(mcfcau_md5_init);
-+module_exit(mcfcau_md5_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION(MCFCAU_MD5_DRIVER_DESC);
-+MODULE_AUTHOR("Andrey Butok");
---- /dev/null
-+++ b/drivers/crypto/mcfcau-sha1.c
-@@ -0,0 +1,331 @@
-+/***************************************************************************
-+ * mcfcau-sha1.c - Implementation of SHA1 Secure Hash Algorithm
-+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ * Shrek Wu B16972@freescale.com
-+ * Alison Wang b18965@freescale.com
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01 15 October 2007 Andrey Butok
-+ * Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/crypto.h>
-+#include <linux/types.h>
-+#include <crypto/algapi.h>
-+#include <crypto/hash.h>
-+#include <crypto/internal/hash.h>
-+
-+#include "mcfcau.h"
-+
-+#define MCFCAU_SHA1_DIGEST_WORDS (5)
-+#define MCFCAU_SHA1_WORKSPACE_WORDS (80)
-+
-+#define MCFCAU_SHA1_DIGEST_SIZE (20)
-+#define MCFCAU_SHA1_HMAC_BLOCK_SIZE (64)
-+
-+#define MCFCAU_SHA1_DRIVER_DESC "SHA1 ColdFire CAU driver"
-+#define MCFCAU_SHA1_DRIVER_VERSION "v0.01"
-+
-+static const u32 K[4] = {0x5A827999L, /* Rounds 0-19: sqrt(2) * 2^30 */
-+ 0x6ED9EBA1L, /* Rounds 20-39: sqrt(3) * 2^30 */
-+ 0x8F1BBCDCL, /* Rounds 40-59: sqrt(5) * 2^30 */
-+ 0xCA62C1D6L}; /* Rounds 60-79: sqrt(10) * 2^30 */
-+
-+struct mcfcau_sha1_ctx {
-+ u64 count;
-+ u32 state[5];
-+ u8 buffer[64];
-+};
-+
-+static void mcfcau_sha1_transform(__u32 *digest, const char *in, __u32 *W)
-+{
-+ int i;
-+ u32 *tmp_p;
-+ unsigned long iflags;
-+
-+ /* (a) Devide M(i) into 16 words W */
-+ for (i = 0; i < 16; i++)
-+ W[i] = ((const u32 *)in)[i];
-+
-+ /* (b) W[i+16] = S^1(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i]) */
-+ tmp_p = &W[16];
-+
-+ spin_lock_irqsave(&mcfcau_lock, iflags);
-+ asm("move.l %0, %%a0" : : "m"(tmp_p) : "a0");
-+ asm("moveq.l #1, %%d3" : : : "d3");
-+
-+ for (i = 0; i < 64; i++) {
-+ asm("cp0ld.l -64(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0));
-+ asm("cp0ld.l -56(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA0));
-+ asm("cp0ld.l -32(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA0));
-+ asm("cp0ld.l -12(%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_XOR+MCFCAU_CA0));
-+ asm("cp0ld.l %%d3,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CA0) : "d3");
-+ asm("cp0st.l %%d0,(%%a0)+,#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA0));
-+ }
-+
-+ /* (c) */
-+ asm("move.l %0, %%a0" : : "m"(digest) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA0) : "a0"); /* a */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA1) : "a0"); /* b */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA2) : "a0"); /* c */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA3) : "a0"); /* d */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_LDR+MCFCAU_CA4) : "a0"); /* e */
-+
-+ /* (d) */
-+ asm("moveq.l #5, %%d0" : : : "d0");
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_MVRA+MCFCAU_CA0));
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ROTL+MCFCAU_CAA)); /*S^5(A)*/
-+
-+ tmp_p = (u32 *)K;
-+ asm("move.l %0, %%a0" : : "m"(tmp_p) : "a0");
-+ asm("move.l %0, %%a1" : : "m"(W) : "a1");
-+
-+ for (i = 0; i < 20; i++) {
-+ /* t = f1(b, c, d) + K1 + rol32(a, 5) + e + W[i]; */
-+ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFC)); /*f(b,c,d)*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a1"); /*+W*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_SHS));
-+ }
-+
-+ asm("add.l #4,%%a0" : : : "a0"); /* update K */
-+
-+ for (; i < 40; i++) {
-+ /* t = f2(b, c, d) + K2 + rol32(a, 5) + e + W[i]; */
-+ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a1"); /*+W*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_SHS));
-+ }
-+
-+ asm("add.l #4,%%a0" : : : "a0"); /* update K */
-+
-+ for (; i < 60; i++) {
-+ /* t = f3(b, c, d) + K3 + rol32(a, 5) + e + W[i]; */
-+ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFM)); /*f(b,c,d)*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a1"); /*+W*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_SHS));
-+ }
-+
-+ asm("add.l #4,%%a0" : : : "a0"); /* update K */
-+
-+ for (; i < 80; i++) {
-+ /* t = f2(b, c, d) + K4 + rol32(a, 5) + e + W[i]; */
-+ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
-+ asm("cp0ld.l (%%a0),%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
-+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CAA) : "a1"); /*+W*/
-+ asm("cp0ld.l %%d0,%%d0,#1,%0"
-+ : : "n"(MCFCAU_SHS));
-+ }
-+
-+ /* (e) */
-+ asm("move.l %0, %%a0" : : "m"(digest) : "a0");
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CA0) : "a0"); /* +a */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CA1) : "a0"); /* +b */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CA2) : "a0"); /* +c */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CA3) : "a0"); /* +d */
-+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0"
-+ : : "n"(MCFCAU_ADR+MCFCAU_CA4) : "a0"); /* +e */
-+
-+ asm("cp0st.l %%d0,-(%%a0),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA4) : "a0");
-+ asm("cp0st.l %%d0,-(%%a0),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA3) : "a0");
-+ asm("cp0st.l %%d0,-(%%a0),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA2) : "a0");
-+ asm("cp0st.l %%d0,-(%%a0),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA1) : "a0");
-+ asm("cp0st.l %%d0,-(%%a0),#1,%0"
-+ : : "n"(MCFCAU_STR+MCFCAU_CA0) : "a0");
-+ spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+static int mcfcau_sha1_init(struct shash_desc *desc)
-+{
-+ struct mcfcau_sha1_ctx *sctx = shash_desc_ctx(desc);
-+ static const struct mcfcau_sha1_ctx initstate = {
-+ 0,
-+ { 0x67452301, 0xEFCDAB89, 0x98BADCFE, 0x10325476, 0xC3D2E1F0 },
-+ { 0, }
-+ };
-+
-+ DBG("mcfcau_sha1_init\n");
-+ *sctx = initstate;
-+
-+ return 0;
-+}
-+
-+static int mcfcau_sha1_update(struct shash_desc *desc, const u8 *data,
-+ unsigned int len)
-+{
-+ struct mcfcau_sha1_ctx *sctx = shash_desc_ctx(desc);
-+ unsigned int partial, done;
-+ const u8 *src;
-+
-+ DBG("mcfcau_sha1_update\n");
-+ partial = sctx->count & 0x3f;
-+ sctx->count += len;
-+ done = 0;
-+ src = data;
-+
-+ if ((partial + len) > 63) {
-+ u32 temp[MCFCAU_SHA1_WORKSPACE_WORDS];
-+
-+ if (partial) {
-+ done = -partial;
-+ memcpy(sctx->buffer + partial, data, done + 64);
-+ src = sctx->buffer;
-+ }
-+
-+ do {
-+ mcfcau_sha1_transform(sctx->state, src, temp);
-+ done += 64;
-+ src = data + done;
-+ } while (done + 63 < len);
-+
-+ memset(temp, 0, sizeof(temp));
-+ partial = 0;
-+ }
-+ memcpy(sctx->buffer + partial, src, len - done);
-+ return 0;
-+}
-+
-+
-+/* Add padding and return the message digest. */
-+static int mcfcau_sha1_final(struct shash_desc *desc, u8 *out)
-+{
-+ struct mcfcau_sha1_ctx *sctx = shash_desc_ctx(desc);
-+ u32 *dst = (u32 *)out;
-+ u32 i, index, padlen;
-+ u64 bits;
-+ static const u8 padding[64] = { 0x80, };
-+
-+ DBG("mcfcau_sha1_final\n");
-+ bits = sctx->count << 3;
-+
-+ /* Pad out to 56 mod 64 */
-+ index = sctx->count & 0x3f;
-+ padlen = (index < 56) ? (56 - index) : ((64+56) - index);
-+ mcfcau_sha1_update(desc, padding, padlen);
-+
-+ /* Append length */
-+ mcfcau_sha1_update(desc, (const u8 *)&bits, sizeof(bits));
-+
-+ /* Store state in digest */
-+ for (i = 0; i < 5; i++)
-+ dst[i] = sctx->state[i];
-+
-+ /* Wipe context */
-+ memset(sctx, 0, sizeof *sctx);
-+
-+ return 0;
-+}
-+
-+static struct shash_alg mcfcau_sha1_alg = {
-+ .init = mcfcau_sha1_init,
-+ .update = mcfcau_sha1_update,
-+ .final = mcfcau_sha1_final,
-+ .digestsize = MCFCAU_SHA1_DIGEST_SIZE,
-+ .descsize = sizeof(struct mcfcau_sha1_ctx),
-+ .statesize = sizeof(struct mcfcau_sha1_ctx),
-+ .base = {
-+ .cra_name = "sha1",
-+ .cra_driver_name = "sha1-mcfcau",
-+ .cra_priority = MCFCAU_CRA_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
-+ .cra_blocksize = MCFCAU_SHA1_HMAC_BLOCK_SIZE,
-+ .cra_module = THIS_MODULE,
-+ .cra_alignmask = 3,
-+ }
-+};
-+
-+static int __init init(void)
-+{
-+ int ret = crypto_register_shash(&mcfcau_sha1_alg);
-+ printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " "
-+ MCFCAU_SHA1_DRIVER_VERSION " %s.\n",
-+ ret ? "failed" : "registered");
-+ return ret;
-+}
-+
-+static void __exit fini(void)
-+{
-+ crypto_unregister_shash(&mcfcau_sha1_alg);
-+ printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " "
-+ MCFCAU_SHA1_DRIVER_VERSION " unregistered.\n");
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION(MCFCAU_SHA1_DRIVER_DESC);
-+MODULE_AUTHOR("Andrey Butok");
---- /dev/null
-+++ b/drivers/crypto/mcfcau.c
-@@ -0,0 +1,33 @@
-+/***************************************************************************
-+ * mcfcau.c - Implementation of DES & Triple DES EDE Cipher Algorithms
-+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01 28 September 2006 Andrey Butok
-+ * Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+#include <linux/module.h>
-+
-+DEFINE_SPINLOCK(mcfcau_lock);
-+EXPORT_SYMBOL(mcfcau_lock);
---- /dev/null
-+++ b/drivers/crypto/mcfcau.h
-@@ -0,0 +1,101 @@
-+/***************************************************************************
-+ * mcfcau.h - Common header file for Freescale ColdFire
-+ * Cryptographic Acceleration Unit (CAU) drivers.
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Andrey Butok
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01 14 August 2007 Andrey Butok
-+ */
-+
-+#ifndef MCFCAU_H
-+#define MCFCAU_H
-+
-+#include <linux/spinlock.h>
-+
-+/* CAU Registers (CAx) */
-+#define MCFCAU_CASR (0x0)
-+#define MCFCAU_CAA (0x1)
-+#define MCFCAU_CA0 (0x2)
-+#define MCFCAU_CA1 (0x3)
-+#define MCFCAU_CA2 (0x4)
-+#define MCFCAU_CA3 (0x5)
-+#define MCFCAU_CA4 (0x6)
-+#define MCFCAU_CA5 (0x7)
-+
-+ /* CAU Commands */
-+#define MCFCAU_CNOP (0x000)
-+#define MCFCAU_LDR (0x010)
-+#define MCFCAU_STR (0x020)
-+#define MCFCAU_ADR (0x030)
-+#define MCFCAU_RADR (0x040)
-+#define MCFCAU_ADRA (0x050)
-+#define MCFCAU_XOR (0x060)
-+#define MCFCAU_ROTL (0x070)
-+#define MCFCAU_MVRA (0x080)
-+#define MCFCAU_MVAR (0x090)
-+#define MCFCAU_AESS (0x0A0)
-+#define MCFCAU_AESIS (0x0B0)
-+#define MCFCAU_AESC (0x0C0)
-+#define MCFCAU_AESIC (0x0D0)
-+#define MCFCAU_AESR (0x0E0)
-+#define MCFCAU_AESIR (0x0F0)
-+#define MCFCAU_DESR (0x100)
-+#define MCFCAU_DESK (0x110)
-+#define MCFCAU_HASH (0x120)
-+#define MCFCAU_SHS (0x130)
-+#define MCFCAU_MDS (0x140)
-+#define MCFCAU_ILL (0x1F0)
-+
-+/* DESR Fields */
-+#define MCFCAU_IP (0x08) /* initial permutation */
-+#define MCFCAU_FP (0x04) /* final permutation */
-+#define MCFCAU_KSL1 (0x00) /* key schedule left 1 bit */
-+#define MCFCAU_KSL2 (0x01) /* key schedule left 2 bits */
-+#define MCFCAU_KSR1 (0x02) /* key schedule right 1 bit */
-+#define MCFCAU_KSR2 (0x03) /* key schedule right 2 bits */
-+
-+/* DESK Field */
-+#define MCFCAU_DC (0x01) /* decrypt key schedule */
-+#define MCFCAU_CP (0x02) /* check parity */
-+
-+/* HASH Functions Codes */
-+#define MCFCAU_HFF (0x0) /* MD5 F() CA1&CA2 | ~CA1&CA3 */
-+#define MCFCAU_HFG (0x1) /* MD5 G() CA1&CA3 | CA2&~CA3 */
-+#define MCFCAU_HFH (0x2) /* MD5 H(), SHA Parity() CA1^CA2^CA3 */
-+#define MCFCAU_HFI (0x3) /* MD5 I() CA2^(CA1|~CA3) */
-+#define MCFCAU_HFC (0x4) /* SHA Ch() CA1&CA2 ^ ~CA1&CA3 */
-+#define MCFCAU_HFM (0x5)
-+/* SHA Maj() CA1&CA2 ^ CA1&CA3 ^ CA2&CA3 */
-+
-+#define MCFCAU_CRA_PRIORITY (300)
-+
-+extern spinlock_t mcfcau_lock;
-+
-+#ifdef DEBUG
-+#define DBG(fmt, args...) printk(KERN_INFO "[%s] " fmt ,\
-+ __func__, ## args)
-+#else
-+#define DBG(fmt, args...) do {} while (0)
-+#endif
-+
-+#endif
diff --git a/target/linux/coldfire/patches/012-Add-vDSO-support-for-Coldfire-platform.patch b/target/linux/coldfire/patches/012-Add-vDSO-support-for-Coldfire-platform.patch
deleted file mode 100644
index 8a7ead5..0000000
--- a/target/linux/coldfire/patches/012-Add-vDSO-support-for-Coldfire-platform.patch
+++ /dev/null
@@ -1,497 +0,0 @@
-From 1ba9968246337836bf0acdbf7733a628da5c5e42 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:42 +0800
-Subject: [PATCH 12/52] Add vDSO support for Coldfire platform
-
-This patch adds vDSO support for Coldfire platform.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/common/entry.S | 36 ++++++++++
- arch/m68k/coldfire/vdso/Makefile | 46 +++++++++++++
- arch/m68k/coldfire/vdso/vdso-bin.S | 14 ++++
- arch/m68k/coldfire/vdso/vdso-lib.S | 57 ++++++++++++++++
- arch/m68k/coldfire/vdso/vdso-note.S | 27 ++++++++
- arch/m68k/coldfire/vdso/vdso.c | 124 +++++++++++++++++++++++++++++++++++
- arch/m68k/coldfire/vdso/vdso.lds.S | 89 +++++++++++++++++++++++++
- arch/m68k/include/asm/auxvec.h | 9 +++
- arch/m68k/mm/init.c | 3 +
- 9 files changed, 405 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/coldfire/vdso/Makefile
- create mode 100644 arch/m68k/coldfire/vdso/vdso-bin.S
- create mode 100644 arch/m68k/coldfire/vdso/vdso-lib.S
- create mode 100644 arch/m68k/coldfire/vdso/vdso-note.S
- create mode 100644 arch/m68k/coldfire/vdso/vdso.c
- create mode 100644 arch/m68k/coldfire/vdso/vdso.lds.S
-
---- a/arch/m68k/coldfire/common/entry.S
-+++ b/arch/m68k/coldfire/common/entry.S
-@@ -69,6 +69,9 @@ ENTRY(buserr)
- movew #0x2700,%sr /* lock interrupts */
- #endif
- SAVE_ALL_INT
-+#ifdef CONFIG_VDSO
-+ jsr check_vdso_atomic_cmpxchg_32
-+#endif
- #ifdef CONFIG_COLDFIRE_FOO
- movew PT_0FF_SR(%sp),%d3 /* get original %sr */
- oril #0x2000,%d3 /* set supervisor mode in it */
-@@ -82,6 +85,9 @@ ENTRY(buserr)
-
- ENTRY(trap)
- SAVE_ALL_INT
-+#ifdef CONFIG_VDSO
-+ jsr check_vdso_atomic_cmpxchg_32
-+#endif
- GET_CURRENT(%d0)
- movel %sp,%sp@- /* stack frame pointer argument */
- jsr trap_c
-@@ -213,6 +219,9 @@ do_delayed_trace:
- */
- ENTRY(inthandler)
- SAVE_ALL_INT
-+#ifdef CONFIG_VDSO
-+ jsr check_vdso_atomic_cmpxchg_32
-+#endif
- GET_CURRENT(%d0)
- movel %curptr@(TASK_INFO+TINFO_PREEMPT),%d0
- addil #0x10000,%d0
-@@ -398,8 +407,35 @@ resume:
- movew %a1@(TASK_THREAD+THREAD_SR),%d0
- movew %d0,%sr
-
-+#ifdef CONFIG_VDSO
-+ /* save thread pointer */
-+ lea _vdso_tp,%a0
-+ movel (%a0),%a0
-+ movel %a1@(TASK_INFO+TINFO_TP_VALUE),(%a0)
-+#endif
- rts
-
-+#ifdef CONFIG_VDSO
-+/* if interrupted PC is between 0x5fffe40c to 0x5ffffe412 */
-+/* then set PC back to 0x5fffe40c (start addr of __kernel_atomic_cmpxchg_32) */
-+/* note: these absolute addresses depend on vdso-lib.S and vdso.lds.S */
-+ENTRY(check_vdso_atomic_cmpxchg_32)
-+ movel %sp@(PT_OFF_PC),%d0
-+ cmpil #0x5fffe414,%d0 /* __kernel_atomic_cmpxchg_32: line 4 */
-+ ble label1
-+ cmpil #0x5fffe412,%d0 /* __kernel_atomic_cmpxchg_32: line 3 */
-+ beql label0
-+ cmpil #0x5fffe40e,%d0 /* __kernel_atomic_cmpxchg_32: line 2 */
-+ beql label0
-+ jra label1
-+label0:
-+ /* __kernel_atomic_cmpxchg_32: line 1 */
-+ movel #0x5fffe40c,%d0
-+ movel %d0,%sp@(PT_OFF_PC)
-+label1:
-+ rts
-+#endif
-+
- .data
- ALIGN
- sys_call_table:
---- /dev/null
-+++ b/arch/m68k/coldfire/vdso/Makefile
-@@ -0,0 +1,46 @@
-+#
-+# Makefile for arch/m68k/coldfire/vdso with special rules
-+# for building the DSO lib
-+#
-+# Based on arch/sh/kernel/vsyscall/Makefile
-+#
-+# Kurt Mahan <kmahan@freescale.com>
-+#
-+
-+obj-y := vdso.o vdso-bin.o
-+
-+$(obj)/vdso-bin.o: $(obj)/vdso.lds $(obj)/vdso-lib.so
-+
-+#
-+# The DSO Lib
-+#
-+
-+# special linker script for building DSO images
-+quiet_cmd_vdso = VDSO $@
-+ cmd_vdso = $(LD) -nostdlib --eh-frame-hdr $(SYSCFLAGS_$(@F)) \
-+ -T $(obj)/vdso.lds $^ -o $@
-+
-+vdso-flags = -shared -s -soname=linux-gate.so.1
-+
-+SYSCFLAGS_vdso-lib.so = $(vdso-flags)
-+
-+$(obj)/vdso-lib.so: $(obj)/vdso-lib.o $(obj)/vdso-note.o
-+ $(call if_changed,vdso)
-+
-+$(obj)/vdso.lds: $(srctree)/arch/m68k/coldfire/vdso/vdso.lds.S
-+ cp $< $@
-+
-+#
-+# Create a special relocatable object that should mirror the
-+# symbol table and layout of the linked DSO lib. With ld -R
-+# these symbols can be refered to in the kernel code rather
-+# than as hand-coded addresses
-+#
-+# extra-y += vdso-syms.o
-+# $(obj)/built-in.o: $(obj)/vdso-syms.o
-+# $(obj)/built-in.o: ld_flags += -R (obj)/vdso-syms.o
-+
-+# SYSCFLAGS_vdso-syms.o = -r
-+# $(obj)/vdso-syms.o: $(src)/vdso.lds \
-+# $(obj)/vdso-lib.o $(obj)/vdso-note.o FORCE
-+# $(call if_changed,vdso)
---- /dev/null
-+++ b/arch/m68k/coldfire/vdso/vdso-bin.S
-@@ -0,0 +1,14 @@
-+/*
-+ * Setup vdso lib (.so) as binary image.
-+ */
-+
-+#include <linux/init.h>
-+
-+__INITDATA
-+
-+ .globl vdso_bin_start, vdso_bin_end
-+vdso_bin_start:
-+ .incbin "arch/m68k/coldfire/vdso/vdso-lib.so"
-+vdso_bin_end:
-+
-+__FINIT
---- /dev/null
-+++ b/arch/m68k/coldfire/vdso/vdso-lib.S
-@@ -0,0 +1,57 @@
-+/*
-+ * VDSO userspace code
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/unistd.h>
-+
-+ .text
-+/*
-+ * Read the thread pointer into A0 (and D0, for compatibility).
-+ */
-+ENTRY(__kernel_read_tp)
-+ .cfi_startproc
-+ lea kuser_vdso_tp,%a0
-+ movel (%a0), %d0
-+ movel %d0,%a0
-+ rts
-+ .cfi_endproc
-+ .size __kernel_read_tp,.-__kernel_read_tp
-+
-+/*
-+ * Atomic compare exchange. Can not clobber any registers
-+ * other than conditional codes.
-+ */
-+ENTRY(__kernel_atomic_cmpxchg_32)
-+ .cfi_startproc
-+ cmpl (%a0),%d0
-+ bne label0
-+ movel %d1, (%a0)
-+ jmp label1
-+label0:
-+ movel (%a0),%d0
-+label1:
-+ rts
-+ .cfi_endproc
-+ .size __kernel_atomic_cmpxchg_32,.-__kernel_atomic_cmpxchg_32
-+
-+/*
-+ * Atomic memory barrier. Can not clobber any registers
-+ * other than condition codes.
-+ */
-+ENTRY(__kernel_atomic_barrier)
-+ .cfi_startproc
-+ /* no code needed for uniprocs */
-+ rts
-+ .cfi_endproc
-+ .size __kernel_atomic_barrier,.-__kernel_atomic_barrier
-+
-+ .previous
---- /dev/null
-+++ b/arch/m68k/coldfire/vdso/vdso-note.S
-@@ -0,0 +1,27 @@
-+/*
-+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
-+ * Here we can supply some information useful to userland.
-+ *
-+ * Based on arch/sh/kernel/vsyscall/vsyscall-note.S
-+ */
-+
-+#include <linux/uts.h>
-+#include <linux/version.h>
-+
-+#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type) \
-+ .section name, flags; \
-+ .balign 4; \
-+ .long 1f - 0f; /* name length */ \
-+ .long 3f - 2f; /* data length */ \
-+ .long type; /* note type */ \
-+0: .asciz vendor; /* vendor name */ \
-+1: .balign 4; \
-+2:
-+
-+#define ASM_ELF_NOTE_END \
-+3: .balign 4; /* pad out section */ \
-+ .previous
-+
-+ ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
-+ .long LINUX_VERSION_CODE
-+ ASM_ELF_NOTE_END
---- /dev/null
-+++ b/arch/m68k/coldfire/vdso/vdso.c
-@@ -0,0 +1,124 @@
-+/*
-+ * arch/m68k/coldfire/vdso/vdso.c
-+ *
-+ * Based on arch/sh/kernel/vsyscall/vsyscall.c
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/gfp.h>
-+#include <linux/module.h>
-+#include <linux/elf.h>
-+#include <linux/sched.h>
-+#include <linux/err.h>
-+
-+/* Mapping vDSO at the default address (what would've been returned
-+ * if VDSO_MBASE was 0) makes it impossible to extend data segment
-+ * (through brk()) for static binaries. The vDSO fits into one page,
-+ * so map it just before TASK_UNMAPPED_BASE.
-+ */
-+#define VDSO_MBASE (TASK_UNMAPPED_BASE - PAGE_SIZE)
-+#define VDSO_VAR_OFFSET 4096
-+
-+unsigned int vdso_enabled = 1;
-+EXPORT_SYMBOL_GPL(vdso_enabled);
-+
-+static struct page *vdso_pages[1];
-+
-+/* _vdso_var_start: vdso_page_start + offset_4K */
-+/* it's used to save key values from kernel */
-+void *_vdso_var_start;
-+void *_vdso_tp;
-+
-+extern const char vdso_bin_start, vdso_bin_end;
-+
-+int __init vdso_init(void)
-+{
-+ void *vdso_page = (void *)get_zeroed_page(GFP_ATOMIC);
-+ vdso_pages[0] = virt_to_page(vdso_page);
-+
-+ _vdso_var_start = (void *)(vdso_page + VDSO_VAR_OFFSET);
-+ _vdso_tp = _vdso_var_start;
-+
-+ printk(KERN_INFO "** VDSO_INIT\n");
-+
-+ /* copy dso bin in */
-+ memcpy(vdso_page,
-+ &vdso_bin_start, &vdso_bin_end - &vdso_bin_start);
-+
-+ return 0;
-+}
-+
-+/* setup VMA at program startup for the vdso page */
-+int arch_setup_additional_pages(struct linux_binprm *bprm,
-+ int executable_stack)
-+{
-+ struct mm_struct *mm = current->mm;
-+ unsigned long addr;
-+ int ret;
-+
-+ current->mm->context.vdso = 0;
-+
-+ down_write(&mm->mmap_sem);
-+ addr = get_unmapped_area(NULL, VDSO_MBASE, PAGE_SIZE, 0, 0);
-+ if (IS_ERR_VALUE(addr)) {
-+ ret = addr;
-+ goto up_fail;
-+ }
-+
-+ ret = install_special_mapping(mm, addr, PAGE_SIZE,
-+ VM_READ | VM_EXEC |
-+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |
-+ VM_ALWAYSDUMP,
-+ vdso_pages);
-+
-+ if (unlikely(ret))
-+ goto up_fail;
-+
-+ current->mm->context.vdso = (void *)addr;
-+
-+up_fail:
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "arch_setup_additional_pages: addr: %lx; ret: %d\n",
-+ addr, ret);
-+#endif
-+
-+ up_write(&mm->mmap_sem);
-+ return ret;
-+}
-+
-+/*
-+ * check vma name
-+ */
-+const char *arch_vma_name(struct vm_area_struct *vma)
-+{
-+ if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
-+ return "[vdso]";
-+
-+ return NULL;
-+}
-+
-+struct vm_area_struct *get_gate_vma(struct task_struct *task)
-+{
-+ return NULL;
-+}
-+
-+int in_gate_area(struct task_struct *task, unsigned long address)
-+{
-+ return 0;
-+}
-+
-+int in_gate_area_no_task(unsigned long address)
-+{
-+ return 0;
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/vdso/vdso.lds.S
-@@ -0,0 +1,89 @@
-+/*
-+ * Linker script for vdso DSO. The vdso page is an ELF shared
-+ * object prelinked to its virtual address, and with only one read-only
-+ * segment (that fits in one page). This script controls its layout.
-+ *
-+ * Based on arch/sh/kernel/vsyscall/vsyscall.lds.S
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
-+OUTPUT_ARCH(m68k)
-+
-+/* The ELF entry point can be used to set the AT_SYSINFO value. */
-+ENTRY(__kernel_read_tp);
-+ENTRY(__kernel_atomic_cmpxchg_32);
-+ENTRY(__kernel_atomic_barrier);
-+
-+SECTIONS
-+{
-+ . = 0x5fffe000 + SIZEOF_HEADERS;
-+
-+ .hash : { *(.hash) } :text
-+ .gnu.hash : { *(.gnu.hash) }
-+ .dynsym : { *(.dynsym) }
-+ .dynstr : { *(.dynstr) }
-+ .gnu.version : { *(.gnu.version) }
-+ .gnu.version_d : { *(.gnu.version_d) }
-+ .gnu.version_r : { *(.gnu.version_r) }
-+
-+ /*
-+ * This linker script is used both with -r and with -shared.
-+ * For the layouts to match, we need to skip more than enough
-+ * space for the dynamic symbol table et al. If this amount
-+ * is insufficient, ld -shared will barf. Just increase it here.
-+ */
-+ . = 0x5fffe000 + 0x400;
-+
-+ .text : { *(.text) } :text
-+ .note : { *(.note.*) } :text :note
-+ .eh_frame_hdr : { *(.eh_frame_hdr ) } :text :eh_frame_hdr
-+ .eh_frame : {
-+ KEEP (*(.eh_frame))
-+ LONG (0)
-+ } :text
-+ .dynamic : { *(.dynamic) } :text :dynamic
-+ .useless : {
-+ *(.got.plt) *(.got)
-+ *(.data .data.* .gnu.linkonce.d.*)
-+ *(.dynbss)
-+ *(.bss .bss.* .gnu.linkonce.b.*)
-+ } :text
-+
-+ . = 0x5fffe000 + 0x1000;
-+ kuser_vdso_tp = .;
-+}
-+
-+/*
-+ * We must supply the ELF program headers explicitly to get just one
-+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
-+ */
-+PHDRS
-+{
-+ text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
-+ dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
-+ note PT_NOTE FLAGS(4); /* PF_R */
-+ eh_frame_hdr PT_GNU_EH_FRAME;
-+}
-+
-+/*
-+ * This controls what symbols we export from the DSO.
-+ */
-+VERSION
-+{
-+ LINUX_2.6 {
-+ global:
-+ __kernel_read_tp;
-+ __kernel_atomic_cmpxchg_32;
-+ __kernel_atomic_barrier;
-+
-+ local: *;
-+ };
-+}
---- a/arch/m68k/include/asm/auxvec.h
-+++ b/arch/m68k/include/asm/auxvec.h
-@@ -1,4 +1,13 @@
- #ifndef __ASMm68k_AUXVEC_H
- #define __ASMm68k_AUXVEC_H
-+/*
-+ * Architecture-neutral AT_ values in 0-17, leave some room
-+ * for more of them.
-+ */
-+
-+#ifdef CONFIG_VDSO
-+/* Entry point to the vdso page */
-+#define AT_SYSINFO_EHDR 33
-+#endif
-
- #endif
---- a/arch/m68k/mm/init.c
-+++ b/arch/m68k/mm/init.c
-@@ -39,6 +39,9 @@
- #include <asm/sections.h>
- #include <asm/tlb.h>
-
-+#ifdef CONFIG_VDSO
-+int vdso_init(void);
-+#endif
-
- DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
diff --git a/target/linux/coldfire/patches/013-Add-MCD-DMA-driver-for-MCF547x-MCF548x.patch b/target/linux/coldfire/patches/013-Add-MCD-DMA-driver-for-MCF547x-MCF548x.patch
deleted file mode 100644
index 3cc8555..0000000
--- a/target/linux/coldfire/patches/013-Add-MCD-DMA-driver-for-MCF547x-MCF548x.patch
+++ /dev/null
@@ -1,5318 +0,0 @@
-From de2bd6eff9a9f20c6c997b5384c8e81720d9d659 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:43 +0800
-Subject: [PATCH 13/52] Add MCD DMA driver for MCF547x/MCF548x
-
-Add MCD DMA driver for MCF547x/MCF548x.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m547x/dma.c | 518 ++++++++
- arch/m68k/include/asm/MCD_dma.h | 434 +++++++
- drivers/dma/MCD_dma.h | 431 +++++++
- drivers/dma/MCD_dmaApi.c | 1043 +++++++++++++++++
- drivers/dma/MCD_progCheck.h | 29 +
- drivers/dma/MCD_tasks.c | 2457 +++++++++++++++++++++++++++++++++++++++
- drivers/dma/MCD_tasksInit.c | 271 +++++
- drivers/dma/MCD_tasksInit.h | 84 ++
- 8 files changed, 5267 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/coldfire/m547x/dma.c
- create mode 100644 arch/m68k/include/asm/MCD_dma.h
- create mode 100644 drivers/dma/MCD_dma.h
- create mode 100644 drivers/dma/MCD_dmaApi.c
- create mode 100644 drivers/dma/MCD_progCheck.h
- create mode 100644 drivers/dma/MCD_tasks.c
- create mode 100644 drivers/dma/MCD_tasksInit.c
- create mode 100644 drivers/dma/MCD_tasksInit.h
-
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x/dma.c
-@@ -0,0 +1,518 @@
-+/*
-+ * arch/m68k/coldfire/m547x/dma.c
-+ *
-+ * Coldfire M547x/M548x DMA
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This code is based on patches from the Freescale M547x_8x BSP
-+ * release mcf547x_8x-20070107-ltib.iso
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/dma.h>
-+#include <asm/coldfire.h>
-+#include <asm/m5485sram.h>
-+#include <asm/mcfsim.h>
-+#include <asm/MCD_dma.h>
-+
-+/*
-+ * This global keeps track of which initiators have been
-+ * used of the available assignments. Initiators 0-15 are
-+ * hardwired. Initiators 16-31 are multiplexed and controlled
-+ * via the Initiatior Mux Control Registe (IMCR). The
-+ * assigned requestor is stored with the associated initiator
-+ * number.
-+ */
-+static int used_reqs[32] = {
-+ DMA_ALWAYS, DMA_DSPI_RX, DMA_DSPI_TX, DMA_DREQ0,
-+ DMA_PSC0_RX, DMA_PSC0_TX, DMA_USBEP0, DMA_USBEP1,
-+ DMA_USBEP2, DMA_USBEP3, DMA_PCI_TX, DMA_PCI_RX,
-+ DMA_PSC1_RX, DMA_PSC1_TX, DMA_I2C_RX, DMA_I2C_TX,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0
-+};
-+
-+/*
-+ * This global keeps track of which channels have been assigned
-+ * to tasks. This methology assumes that no single initiator
-+ * will be tied to more than one task/channel
-+ */
-+static char used_channel[16] = {
-+ -1, -1, -1, -1, -1, -1, -1, -1,
-+ -1, -1, -1, -1, -1, -1, -1, -1
-+};
-+
-+unsigned int connected_channel[16] = {
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, 0, 0, 0, 0, 0, 0
-+};
-+
-+/**
-+ * dma_set_initiator - enable initiator
-+ * @initiator: initiator identifier
-+ *
-+ * Returns 0 of successful, non-zero otherwise
-+ *
-+ * Attempt to enable the provided Initiator in the Initiator
-+ * Mux Control Register.
-+ */
-+int dma_set_initiator(int initiator)
-+{
-+ switch (initiator) {
-+ case DMA_ALWAYS:
-+ case DMA_DSPI_RX:
-+ case DMA_DSPI_TX:
-+ case DMA_DREQ0:
-+ case DMA_PSC0_RX:
-+ case DMA_PSC0_TX:
-+ case DMA_USBEP0:
-+ case DMA_USBEP1:
-+ case DMA_USBEP2:
-+ case DMA_USBEP3:
-+ case DMA_PCI_TX:
-+ case DMA_PCI_RX:
-+ case DMA_PSC1_RX:
-+ case DMA_PSC1_TX:
-+ case DMA_I2C_RX:
-+ case DMA_I2C_TX:
-+ /*
-+ * These initiators are always active
-+ */
-+ break;
-+
-+ case DMA_FEC0_RX:
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC16(3))
-+ | MCF_DMA_IMCR_SRC16_FEC0RX;
-+ used_reqs[16] = DMA_FEC0_RX;
-+ break;
-+
-+ case DMA_FEC0_TX:
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC17(3))
-+ | MCF_DMA_IMCR_SRC17_FEC0TX;
-+ used_reqs[17] = DMA_FEC0_TX;
-+ break;
-+
-+ case DMA_FEC1_RX:
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC20(3))
-+ | MCF_DMA_IMCR_SRC20_FEC1RX;
-+ used_reqs[20] = DMA_FEC1_RX;
-+ break;
-+
-+ case DMA_FEC1_TX:
-+ if (used_reqs[21] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
-+ | MCF_DMA_IMCR_SRC21_FEC1TX;
-+ used_reqs[21] = DMA_FEC1_TX;
-+ } else if (used_reqs[25] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
-+ | MCF_DMA_IMCR_SRC25_FEC1TX;
-+ used_reqs[25] = DMA_FEC1_TX;
-+ } else if (used_reqs[31] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
-+ | MCF_DMA_IMCR_SRC31_FEC1TX;
-+ used_reqs[31] = DMA_FEC1_TX;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_DREQ1:
-+ if (used_reqs[29] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
-+ | MCF_DMA_IMCR_SRC29_DREQ1;
-+ used_reqs[29] = DMA_DREQ1;
-+ } else if (used_reqs[21] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
-+ | MCF_DMA_IMCR_SRC21_DREQ1;
-+ used_reqs[21] = DMA_DREQ1;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_CTM0:
-+ if (used_reqs[24] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC24(3))
-+ | MCF_DMA_IMCR_SRC24_CTM0;
-+ used_reqs[24] = DMA_CTM0;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_CTM1:
-+ if (used_reqs[25] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
-+ | MCF_DMA_IMCR_SRC25_CTM1;
-+ used_reqs[25] = DMA_CTM1;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_CTM2:
-+ if (used_reqs[26] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
-+ | MCF_DMA_IMCR_SRC26_CTM2;
-+ used_reqs[26] = DMA_CTM2;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_CTM3:
-+ if (used_reqs[27] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
-+ | MCF_DMA_IMCR_SRC27_CTM3;
-+ used_reqs[27] = DMA_CTM3;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_CTM4:
-+ if (used_reqs[28] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
-+ | MCF_DMA_IMCR_SRC28_CTM4;
-+ used_reqs[28] = DMA_CTM4;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_CTM5:
-+ if (used_reqs[29] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
-+ | MCF_DMA_IMCR_SRC29_CTM5;
-+ used_reqs[29] = DMA_CTM5;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_CTM6:
-+ if (used_reqs[30] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
-+ | MCF_DMA_IMCR_SRC30_CTM6;
-+ used_reqs[30] = DMA_CTM6;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_CTM7:
-+ if (used_reqs[31] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
-+ | MCF_DMA_IMCR_SRC31_CTM7;
-+ used_reqs[31] = DMA_CTM7;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_USBEP4:
-+ if (used_reqs[26] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
-+ | MCF_DMA_IMCR_SRC26_USBEP4;
-+ used_reqs[26] = DMA_USBEP4;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_USBEP5:
-+ if (used_reqs[27] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
-+ | MCF_DMA_IMCR_SRC27_USBEP5;
-+ used_reqs[27] = DMA_USBEP5;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_USBEP6:
-+ if (used_reqs[28] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
-+ | MCF_DMA_IMCR_SRC28_USBEP6;
-+ used_reqs[28] = DMA_USBEP6;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_PSC2_RX:
-+ if (used_reqs[28] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
-+ | MCF_DMA_IMCR_SRC28_PSC2RX;
-+ used_reqs[28] = DMA_PSC2_RX;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_PSC2_TX:
-+ if (used_reqs[29] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
-+ | MCF_DMA_IMCR_SRC29_PSC2TX;
-+ used_reqs[29] = DMA_PSC2_TX;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_PSC3_RX:
-+ if (used_reqs[30] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
-+ | MCF_DMA_IMCR_SRC30_PSC3RX;
-+ used_reqs[30] = DMA_PSC3_RX;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ case DMA_PSC3_TX:
-+ if (used_reqs[31] == 0) {
-+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
-+ | MCF_DMA_IMCR_SRC31_PSC3TX;
-+ used_reqs[31] = DMA_PSC3_TX;
-+ } else /* No empty slots */
-+ return 1;
-+ break;
-+
-+ default:
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * dma_get_initiator - get the initiator for the given requestor
-+ * @requestor: initiator identifier
-+ *
-+ * Returns initiator number (0-31) if assigned or just 0
-+ */
-+unsigned int dma_get_initiator(int requestor)
-+{
-+ u32 i;
-+
-+ for (i = 0; i < sizeof(used_reqs); ++i) {
-+ if (used_reqs[i] == requestor)
-+ return i;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * dma_remove_initiator - remove the given initiator from active list
-+ * @requestor: requestor to remove
-+ */
-+void dma_remove_initiator(int requestor)
-+{
-+ u32 i;
-+
-+ for (i = 0; i < sizeof(used_reqs); ++i) {
-+ if (used_reqs[i] == requestor) {
-+ used_reqs[i] = -1;
-+ break;
-+ }
-+ }
-+}
-+
-+/**
-+ * dma_set_channel_fec: find available channel for fec and mark
-+ * @requestor: initiator/requestor identifier
-+ *
-+ * Returns first avaialble channel (0-5) or -1 if all occupied
-+ */
-+int dma_set_channel_fec(int requestor)
-+{
-+ u32 i, t;
-+
-+#ifdef CONFIG_FEC_548x_ENABLE_FEC2
-+ t = 4;
-+#else
-+ t = 2;
-+#endif
-+
-+ for (i = 0; i < t ; ++i) {
-+ if (used_channel[i] == -1) {
-+ used_channel[i] = requestor;
-+ return i;
-+ }
-+ }
-+ /* All channels taken */
-+ return -1;
-+}
-+
-+/**
-+ * dma_set_channel - find an available channel and mark as used
-+ * @requestor: initiator/requestor identifier
-+ *
-+ * Returns first available channel (6-15) or -1 if all occupied
-+ */
-+int dma_set_channel(int requestor)
-+{
-+ u32 i;
-+#ifdef CONFIG_NET_FEC2
-+ i = 4;
-+#else
-+ i = 2;
-+#endif
-+
-+ for (; i < 16; ++i)
-+ if (used_channel[i] == -1) {
-+ used_channel[i] = requestor;
-+ return i;
-+ }
-+
-+ /* All channels taken */
-+ return -1;
-+}
-+
-+/**
-+ * dma_get_channel - get the channel being initiated by the requestor
-+ * @requestor: initiator/requestor identifier
-+ *
-+ * Returns Initiator for requestor or -1 if not found
-+ */
-+int dma_get_channel(int requestor)
-+{
-+ u32 i;
-+
-+ for (i = 0; i < sizeof(used_channel); ++i) {
-+ if (used_channel[i] == requestor)
-+ return i;
-+ }
-+ return -1;
-+}
-+
-+/**
-+ * dma_connect - connect a channel with reference on data
-+ * @channel: channel number
-+ * @address: reference address of data
-+ *
-+ * Returns 0 if success or -1 if invalid channel
-+ */
-+int dma_connect(int channel, int address)
-+{
-+ if ((channel < 16) && (channel >= 0)) {
-+ connected_channel[channel] = address;
-+ return 0;
-+ }
-+ return -1;
-+}
-+
-+/**
-+ * dma_disconnect - disconnect a channel
-+ * @channel: channel number
-+ *
-+ * Returns 0 if success or -1 if invalid channel
-+ */
-+int dma_disconnect(int channel)
-+{
-+ if ((channel < 16) && (channel >= 0)) {
-+ connected_channel[channel] = 0;
-+ return 0;
-+ }
-+ return -1;
-+}
-+
-+/**
-+ * dma_remove_channel - remove channel from the active list
-+ * @requestor: initiator/requestor identifier
-+ */
-+void dma_remove_channel(int requestor)
-+{
-+ u32 i;
-+
-+ for (i = 0; i < sizeof(used_channel); ++i) {
-+ if (used_channel[i] == requestor) {
-+ used_channel[i] = -1;
-+ break;
-+ }
-+ }
-+}
-+
-+/**
-+ * dma_interrupt_handler - dma interrupt handler
-+ * @irq: interrupt number
-+ * @dev_id: data
-+ *
-+ * Returns IRQ_HANDLED
-+ */
-+irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
-+{
-+ u32 i, interrupts;
-+
-+ /*
-+ * Determine which interrupt(s) triggered by AND'ing the
-+ * pending interrupts with those that aren't masked.
-+ */
-+ interrupts = MCF_DMA_DIPR;
-+ MCF_DMA_DIPR = interrupts;
-+
-+ for (i = 0; i < 16; ++i, interrupts >>= 1) {
-+ if (interrupts & 0x1)
-+ if (connected_channel[i] != 0)
-+ ((void (*)(void)) (connected_channel[i])) ();
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/**
-+ * dma_remove_channel_by_number - clear dma channel
-+ * @channel: channel number to clear
-+ */
-+void dma_remove_channel_by_number(int channel)
-+{
-+ if ((channel < sizeof(used_channel)) && (channel >= 0))
-+ used_channel[channel] = -1;
-+}
-+
-+/**
-+ * dma_init - initialize the dma subsystem
-+ *
-+ * Returns 0 if success non-zero if failure
-+ *
-+ * Handles the DMA initialization during device setup.
-+ */
-+int __devinit dma_init()
-+{
-+ int result;
-+ char *dma_version_str;
-+
-+ MCD_getVersion(&dma_version_str);
-+ printk(KERN_INFO "m547x_8x DMA: Initialize %s\n", dma_version_str);
-+
-+ /* attempt to setup dma interrupt handler */
-+ if (request_irq(64 + ISC_DMA, dma_interrupt_handler, IRQF_DISABLED,
-+ "MCD-DMA", NULL)) {
-+ printk(KERN_ERR "MCD-DMA: Cannot allocate the DMA IRQ(48)\n");
-+ return 1;
-+ }
-+
-+ MCF_DMA_DIMR = 0;
-+ MCF_DMA_DIPR = 0xFFFFFFFF;
-+
-+ MCF_ICR(ISC_DMA) = ILP_DMA;
-+
-+ result = MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000),
-+ (void *) SYS_SRAM_DMA_START, MCD_RELOC_TASKS);
-+ if (result != MCD_OK) {
-+ printk(KERN_ERR "MCD-DMA: Cannot perform DMA initialization\n");
-+ free_irq(64 + ISC_DMA, NULL);
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+device_initcall(dma_init);
---- /dev/null
-+++ b/arch/m68k/include/asm/MCD_dma.h
-@@ -0,0 +1,434 @@
-+/*********************************************************************
-+ *
-+ * Copyright (C) 2004 Motorola, Inc.
-+ * MOTOROLA, INC. All Rights Reserved.
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * You are hereby granted a copyright license to use
-+ * the SOFTWARE so long as this entire notice is
-+ * retained without alteration in any modified and/or redistributed
-+ * versions, and that such modified versions are clearly identified
-+ * as such. No licenses are granted by implication, estoppel or
-+ * otherwise under any patents or trademarks of Motorola, Inc. This
-+ * software is provided on an "AS IS" basis and without warranty.
-+ *
-+ * To the maximum extent permitted by applicable law, MOTOROLA
-+ * DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-+ * PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
-+ * SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
-+ * ACCOMPANYING WRITTEN MATERIALS.
-+ *
-+ * To the maximum extent permitted by applicable law, IN NO EVENT
-+ * SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
-+ * WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
-+ * INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
-+ * LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-+ *
-+ * Motorola assumes no responsibility for the maintenance and support
-+ * of this software
-+ ********************************************************************/
-+
-+/*
-+ * File: MCD_dma.h
-+ * Purpose: Main header file for multi-channel DMA API.
-+ *
-+ * Notes:
-+ *
-+ * Modifications:
-+ */
-+#ifndef _MCD_API_H
-+#define _MCD_API_H
-+
-+#include <asm/types.h>
-+
-+/*
-+ * Turn Execution Unit tasks ON (#define) or OFF (#undef)
-+ */
-+#undef MCD_INCLUDE_EU
-+
-+/*
-+ * Number of DMA channels
-+ */
-+#define NCHANNELS 16
-+
-+/*
-+ * Total number of variants
-+ */
-+#ifdef MCD_INCLUDE_EU
-+#define NUMOFVARIANTS 6
-+#else
-+#define NUMOFVARIANTS 4
-+#endif
-+
-+/*
-+ * Define sizes of the various tables
-+ */
-+#define TASK_TABLE_SIZE (NCHANNELS*32)
-+#define VAR_TAB_SIZE (128)
-+#define CONTEXT_SAVE_SIZE (128)
-+#define FUNCDESC_TAB_SIZE (256)
-+
-+#ifdef MCD_INCLUDE_EU
-+#define FUNCDESC_TAB_NUM 16
-+#else
-+#define FUNCDESC_TAB_NUM 1
-+#endif
-+
-+
-+#ifndef DEFINESONLY
-+
-+/*
-+ * Portability typedefs
-+ */
-+ /*
-+#ifndef s32
-+typedef int s32;
-+#endif
-+#ifndef u32
-+typedef unsigned int u32;
-+#endif
-+#ifndef s16
-+typedef short s16;
-+#endif
-+#ifndef u16
-+typedef unsigned short u16;
-+#endif
-+#ifndef s8
-+typedef char s8;
-+#endif
-+#ifndef u8
-+typedef unsigned char u8;
-+#endif
-+*/
-+/*
-+ * These structures represent the internal registers of the
-+ * multi-channel DMA
-+ */
-+struct dmaRegs_s {
-+ u32 taskbar; /* task table base address register */
-+ u32 currPtr;
-+ u32 endPtr;
-+ u32 varTablePtr;
-+ u16 dma_rsvd0;
-+ u16 ptdControl; /* ptd control */
-+ u32 intPending; /* interrupt pending register */
-+ u32 intMask; /* interrupt mask register */
-+ u16 taskControl[16]; /* task control registers */
-+ u8 priority[32]; /* priority registers */
-+ u32 initiatorMux; /* initiator mux control */
-+ u32 taskSize0; /* task size control register 0. */
-+ u32 taskSize1; /* task size control register 1. */
-+ u32 dma_rsvd1; /* reserved */
-+ u32 dma_rsvd2; /* reserved */
-+ u32 debugComp1; /* debug comparator 1 */
-+ u32 debugComp2; /* debug comparator 2 */
-+ u32 debugControl; /* debug control */
-+ u32 debugStatus; /* debug status */
-+ u32 ptdDebug; /* priority task decode debug */
-+ u32 dma_rsvd3[31]; /* reserved */
-+};
-+typedef volatile struct dmaRegs_s dmaRegs;
-+
-+#endif
-+
-+/*
-+ * PTD contrl reg bits
-+ */
-+#define PTD_CTL_TSK_PRI 0x8000
-+#define PTD_CTL_COMM_PREFETCH 0x0001
-+
-+/*
-+ * Task Control reg bits and field masks
-+ */
-+#define TASK_CTL_EN 0x8000
-+#define TASK_CTL_VALID 0x4000
-+#define TASK_CTL_ALWAYS 0x2000
-+#define TASK_CTL_INIT_MASK 0x1f00
-+#define TASK_CTL_ASTRT 0x0080
-+#define TASK_CTL_HIPRITSKEN 0x0040
-+#define TASK_CTL_HLDINITNUM 0x0020
-+#define TASK_CTL_ASTSKNUM_MASK 0x000f
-+
-+/*
-+ * Priority reg bits and field masks
-+ */
-+#define PRIORITY_HLD 0x80
-+#define PRIORITY_PRI_MASK 0x07
-+
-+/*
-+ * Debug Control reg bits and field masks
-+ */
-+#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000
-+#define DBG_CTL_AUTO_ARM 0x00008000
-+#define DBG_CTL_BREAK 0x00004000
-+#define DBG_CTL_COMP1_TYP_MASK 0x00003800
-+#define DBG_CTL_COMP2_TYP_MASK 0x00000070
-+#define DBG_CTL_EXT_BREAK 0x00000004
-+#define DBG_CTL_INT_BREAK 0x00000002
-+
-+/*
-+ * PTD Debug reg selector addresses
-+ * This reg must be written with a value to show the contents of
-+ * one of the desired internal register.
-+ */
-+#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */
-+#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and
-+ have initiators asserted */
-+
-+
-+/*
-+ * General return values
-+ */
-+#define MCD_OK 0
-+#define MCD_ERROR -1
-+#define MCD_TABLE_UNALIGNED -2
-+#define MCD_CHANNEL_INVALID -3
-+
-+/*
-+ * MCD_initDma input flags
-+ */
-+#define MCD_RELOC_TASKS 0x00000001
-+#define MCD_NO_RELOC_TASKS 0x00000000
-+#define MCD_COMM_PREFETCH_EN 0x00000002
-+/* Commbus Prefetching - MCF547x/548x ONLY */
-+
-+/*
-+ * MCD_dmaStatus Status Values for each channel
-+ */
-+#define MCD_NO_DMA 1 /* No DMA has been requested since reset */
-+#define MCD_IDLE 2 /* DMA active, but the initiator is currently inactive */
-+#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */
-+#define MCD_PAUSED 4 /* DMA active but it is currently paused */
-+#define MCD_HALTED 5
-+/* the most recent DMA has been killed with MCD_killTask() */
-+#define MCD_DONE 6 /* the most recent DMA has completed. */
-+
-+
-+/*
-+ * MCD_startDma parameter defines
-+ */
-+
-+/*
-+ * Constants for the funcDesc parameter
-+ */
-+/* Byte swapping: */
-+#define MCD_NO_BYTE_SWAP 0x00045670 /* to disable byte swapping. */
-+#define MCD_BYTE_REVERSE 0x00076540
-+/* to reverse the bytes of each u32 of the DMAed data. */
-+#define MCD_U16_REVERSE 0x00067450 /* to reverse the 16-bit halves of
-+ each 32-bit data value being DMAed.*/
-+#define MCD_U16_BYTE_REVERSE 0x00054760 /* to reverse the byte halves of each
-+ 16-bit half of each 32-bit data value DMAed */
-+#define MCD_NO_BIT_REV 0x00000000
-+/* do not reverse the bits of each byte DMAed. */
-+#define MCD_BIT_REV 0x00088880 /* reverse the bits of each byte DMAed */
-+/* CRCing: */
-+#define MCD_CRC16 0xc0100000 /* to perform CRC-16 on DMAed data. */
-+#define MCD_CRCCCITT 0xc0200000 /* to perform CRC-CCITT on DMAed data. */
-+#define MCD_CRC32 0xc0300000 /* to perform CRC-32 on DMAed data. */
-+#define MCD_CSUMINET 0xc0400000
-+/* to perform internet checksums on DMAed data.*/
-+#define MCD_NO_CSUM 0xa0000000 /* to perform no checksumming. */
-+
-+#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM)
-+#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
-+
-+/*
-+ * Constants for the flags parameter
-+ */
-+#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */
-+#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */
-+#define MCD_TT_FLAGS_SP 0x00000004
-+/* Speculative prefetch(XLB) MCF547x/548x ONLY */
-+#define MCD_TT_FLAGS_MASK 0x000000ff
-+#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
-+
-+#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */
-+#define MCD_CHAIN_DMA /* TBD */
-+#define MCD_EU_DMA /* TBD */
-+#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */
-+#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */
-+
-+
-+/* these flags are valid for MCD_startDma and the chained buffer descriptors */
-+#define MCD_BUF_READY 0x80000000
-+/* indicates that this buffer is now under the DMA's control */
-+#define MCD_WRAP 0x20000000
-+/* to tell the FEC Dmas to wrap to the first BD */
-+#define MCD_INTERRUPT 0x10000000
-+/* to generate an interrupt after completion of the DMA. */
-+#define MCD_END_FRAME 0x08000000
-+/* tell the DMA to end the frame when transferring
-+ last byte of data in buffer */
-+#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum
-+ prior to performing the DMA. */
-+
-+/* Defines for the FEC buffer descriptor control/status word*/
-+#define MCD_FEC_BUF_READY 0x8000
-+#define MCD_FEC_WRAP 0x2000
-+#define MCD_FEC_INTERRUPT 0x1000
-+#define MCD_FEC_END_FRAME 0x0800
-+
-+
-+/*
-+ * Defines for general intuitiveness
-+ */
-+
-+#define MCD_TRUE 1
-+#define MCD_FALSE 0
-+
-+/*
-+ * Three different cases for destination and source.
-+ */
-+#define MINUS1 -1
-+#define ZERO 0
-+#define PLUS1 1
-+
-+#ifndef DEFINESONLY
-+
-+/* Task Table Entry struct*/
-+typedef struct {
-+ u32 TDTstart; /* task descriptor table start */
-+ u32 TDTend; /* task descriptor table end */
-+ u32 varTab; /* variable table start */
-+ u32 FDTandFlags; /* function descriptor table start and flags */
-+ volatile u32 descAddrAndStatus;
-+ volatile u32 modifiedVarTab;
-+ u32 contextSaveSpace; /* context save space start */
-+ u32 literalBases;
-+} TaskTableEntry;
-+
-+
-+/* Chained buffer descriptor */
-+typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
-+struct MCD_bufDesc_struct {
-+ u32 flags; /* flags describing the DMA */
-+ u32 csumResult;
-+ /* checksum from checksumming performed since last checksum reset */
-+ s8 *srcAddr; /* the address to move data from */
-+ s8 *destAddr; /* the address to move data to */
-+ s8 *lastDestAddr; /* the last address written to */
-+ u32 dmaSize;
-+ /* the number of bytes to transfer independent of the transfer size */
-+ MCD_bufDesc *next; /* next buffer descriptor in chain */
-+ u32 info;
-+ /* private information about this descriptor; DMA does not affect it */
-+};
-+
-+/* Progress Query struct */
-+typedef volatile struct MCD_XferProg_struct {
-+ s8 *lastSrcAddr;
-+ /* the most-recent or last, post-increment source address */
-+ s8 *lastDestAddr;
-+ /* the most-recent or last, post-increment destination address */
-+ u32 dmaSize;
-+ /* the amount of data transferred for the current buffer */
-+ MCD_bufDesc *currBufDesc;
-+ /* pointer to the current buffer descriptor being DMAed */
-+} MCD_XferProg;
-+
-+
-+/* FEC buffer descriptor */
-+typedef volatile struct MCD_bufDescFec_struct {
-+ u16 statCtrl;
-+ u16 length;
-+ u32 dataPointer;
-+} MCD_bufDescFec;
-+
-+
-+/*************************************************************************/
-+/*
-+ * API function Prototypes - see MCD_dmaApi.c for further notes
-+ */
-+
-+/*
-+ * MCD_startDma starts a particular kind of DMA .
-+ */
-+int MCD_startDma(
-+ int channel, /* the channel on which to run the DMA */
-+ /* the address to move data from, or buffer-descriptor address */
-+ s8 *srcAddr,
-+ /* the amount to increment the source address per transfer */
-+ s16 srcIncr,
-+ s8 *destAddr, /* the address to move data to */
-+ /* the amount to increment the destination address per transfer */
-+ s16 destIncr,
-+ /* the number of bytes to transfer independent of the transfer size */
-+ u32 dmaSize,
-+ /* the number bytes in of each data movement (1, 2, or 4) */
-+ u32 xferSize,
-+ u32 initiator, /* what device initiates the DMA */
-+ int priority, /* priority of the DMA */
-+ u32 flags, /* flags describing the DMA */
-+ /* a description of byte swapping, bit swapping, and CRC actions */
-+ u32 funcDesc
-+);
-+
-+/*
-+ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA
-+ * registers, relocating and creating the appropriate task structures, and
-+ * setting up some global settings
-+ */
-+int MCD_initDma(dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags);
-+
-+/*
-+ * MCD_dmaStatus() returns the status of the DMA on the requested channel.
-+ */
-+int MCD_dmaStatus(int channel);
-+
-+/*
-+ * MCD_XferProgrQuery() returns progress of DMA on requested channel
-+ */
-+int MCD_XferProgrQuery(int channel, MCD_XferProg *progRep);
-+
-+/*
-+ * MCD_killDma() halts the DMA on the requested channel, without any
-+ * intention of resuming the DMA.
-+ */
-+int MCD_killDma(int channel);
-+
-+/*
-+ * MCD_continDma() continues a DMA which as stopped due to encountering an
-+ * unready buffer descriptor.
-+ */
-+int MCD_continDma(int channel);
-+
-+/*
-+ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
-+ * running on that channel).
-+ */
-+int MCD_pauseDma(int channel);
-+
-+/*
-+ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
-+ * running on that channel).
-+ */
-+int MCD_resumeDma(int channel);
-+
-+/*
-+ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA
-+ */
-+int MCD_csumQuery(int channel, u32 *csum);
-+
-+/*
-+ * MCD_getCodeSize provides the packed size required by the microcoded task
-+ * and structures.
-+ */
-+int MCD_getCodeSize(void);
-+
-+/*
-+ * MCD_getVersion provides a pointer to a version string and returns a
-+ * version number.
-+ */
-+int MCD_getVersion(char **longVersion);
-+
-+/* macro for setting a location in the variable table */
-+#define MCD_SET_VAR(taskTab, idx, value) ((u32 *)(taskTab)->varTab)[idx] = value
-+ /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
-+ so I'm avoiding surrounding it with "do {} while(0)" */
-+
-+#endif /* DEFINESONLY */
-+
-+#endif /* _MCD_API_H */
---- /dev/null
-+++ b/drivers/dma/MCD_dma.h
-@@ -0,0 +1,431 @@
-+/*
-+ * drivers/dma/MCD_dma.h
-+ *
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef _MCD_API_H
-+#define _MCD_API_H
-+
-+/*
-+ * Turn Execution Unit tasks ON (#define) or OFF (#undef)
-+ */
-+#undef MCD_INCLUDE_EU
-+
-+/*
-+ * Number of DMA channels
-+ */
-+#define NCHANNELS 16
-+
-+/*
-+ * Total number of variants
-+ */
-+#ifdef MCD_INCLUDE_EU
-+#define NUMOFVARIANTS 6
-+#else
-+#define NUMOFVARIANTS 4
-+#endif
-+
-+/*
-+ * Define sizes of the various tables
-+ */
-+#define TASK_TABLE_SIZE (NCHANNELS*32)
-+#define VAR_TAB_SIZE (128)
-+#define CONTEXT_SAVE_SIZE (128)
-+#define FUNCDESC_TAB_SIZE (256)
-+
-+#ifdef MCD_INCLUDE_EU
-+#define FUNCDESC_TAB_NUM 16
-+#else
-+#define FUNCDESC_TAB_NUM 1
-+#endif
-+
-+
-+#ifndef DEFINESONLY
-+
-+/*
-+ * Portability typedefs
-+ */
-+typedef int s32;
-+typedef unsigned int u32;
-+typedef short s16;
-+typedef unsigned short u16;
-+typedef char s8;
-+typedef unsigned char u8;
-+
-+/*
-+ * These structures represent the internal registers of the
-+ * multi-channel DMA
-+ */
-+struct dmaRegs_s {
-+ u32 taskbar; /* task table base address register */
-+ u32 currPtr;
-+ u32 endPtr;
-+ u32 varTablePtr;
-+ u16 dma_rsvd0;
-+ u16 ptdControl; /* ptd control */
-+ u32 intPending; /* interrupt pending register */
-+ u32 intMask; /* interrupt mask register */
-+ u16 taskControl[16]; /* task control registers */
-+ u8 priority[32]; /* priority registers */
-+ u32 initiatorMux; /* initiator mux control */
-+ u32 taskSize0; /* task size control register 0. */
-+ u32 taskSize1; /* task size control register 1. */
-+ u32 dma_rsvd1; /* reserved */
-+ u32 dma_rsvd2; /* reserved */
-+ u32 debugComp1; /* debug comparator 1 */
-+ u32 debugComp2; /* debug comparator 2 */
-+ u32 debugControl; /* debug control */
-+ u32 debugStatus; /* debug status */
-+ u32 ptdDebug; /* priority task decode debug */
-+ u32 dma_rsvd3[31]; /* reserved */
-+};
-+typedef volatile struct dmaRegs_s dmaRegs;
-+
-+#endif
-+
-+/*
-+ * PTD contrl reg bits
-+ */
-+#define PTD_CTL_TSK_PRI 0x8000
-+#define PTD_CTL_COMM_PREFETCH 0x0001
-+
-+/*
-+ * Task Control reg bits and field masks
-+ */
-+#define TASK_CTL_EN 0x8000
-+#define TASK_CTL_VALID 0x4000
-+#define TASK_CTL_ALWAYS 0x2000
-+#define TASK_CTL_INIT_MASK 0x1f00
-+#define TASK_CTL_ASTRT 0x0080
-+#define TASK_CTL_HIPRITSKEN 0x0040
-+#define TASK_CTL_HLDINITNUM 0x0020
-+#define TASK_CTL_ASTSKNUM_MASK 0x000f
-+
-+/*
-+ * Priority reg bits and field masks
-+ */
-+#define PRIORITY_HLD 0x80
-+#define PRIORITY_PRI_MASK 0x07
-+
-+/*
-+ * Debug Control reg bits and field masks
-+ */
-+#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000
-+#define DBG_CTL_AUTO_ARM 0x00008000
-+#define DBG_CTL_BREAK 0x00004000
-+#define DBG_CTL_COMP1_TYP_MASK 0x00003800
-+#define DBG_CTL_COMP2_TYP_MASK 0x00000070
-+#define DBG_CTL_EXT_BREAK 0x00000004
-+#define DBG_CTL_INT_BREAK 0x00000002
-+
-+/*
-+ * PTD Debug reg selector addresses
-+ * This reg must be written with a value to show the contents of
-+ * one of the desired internal register.
-+ */
-+#define PTD_DBG_REQ 0x00
-+/* shows the state of 31 initiators */
-+#define PTD_DBG_TSK_VLD_INIT 0x01
-+/* shows which 16 tasks are valid and
-+ * have initiators asserted */
-+
-+
-+/*
-+ * General return values
-+ */
-+#define MCD_OK 0
-+#define MCD_ERROR -1
-+#define MCD_TABLE_UNALIGNED -2
-+#define MCD_CHANNEL_INVALID -3
-+
-+/*
-+ * MCD_initDma input flags
-+ */
-+#define MCD_RELOC_TASKS 0x00000001
-+#define MCD_NO_RELOC_TASKS 0x00000000
-+#define MCD_COMM_PREFETCH_EN 0x00000002
-+/* Commbus Prefetching - MCF547x/548x ONLY */
-+
-+/*
-+ * MCD_dmaStatus Status Values for each channel
-+ */
-+#define MCD_NO_DMA 1
-+/* No DMA has been requested since reset */
-+#define MCD_IDLE 2
-+/* DMA active, but the initiator is currently inactive */
-+#define MCD_RUNNING 3
-+/* DMA active, and the initiator is currently active */
-+#define MCD_PAUSED 4
-+/* DMA active but it is currently paused */
-+#define MCD_HALTED 5
-+/* the most recent DMA has been killed with MCD_killTask() */
-+#define MCD_DONE 6
-+/* the most recent DMA has completed. */
-+
-+
-+/*
-+ * MCD_startDma parameter defines
-+ */
-+
-+/*
-+ * Constants for the funcDesc parameter
-+ */
-+/* Byte swapping: */
-+#define MCD_NO_BYTE_SWAP 0x00045670
-+/* to disable byte swapping. */
-+#define MCD_BYTE_REVERSE 0x00076540
-+/* to reverse the bytes of each u32 of the DMAed data. */
-+#define MCD_U16_REVERSE 0x00067450
-+/* to reverse the 16-bit halves of
-+ * each 32-bit data value being DMAed.*/
-+#define MCD_U16_BYTE_REVERSE 0x00054760
-+/* to reverse the byte halves of each
-+ * 16-bit half of each 32-bit data value DMAed */
-+#define MCD_NO_BIT_REV 0x00000000
-+/* do not reverse the bits of each byte DMAed. */
-+#define MCD_BIT_REV 0x00088880
-+/* reverse the bits of each byte DMAed */
-+/* CRCing: */
-+#define MCD_CRC16 0xc0100000
-+/* to perform CRC-16 on DMAed data. */
-+#define MCD_CRCCCITT 0xc0200000
-+/* to perform CRC-CCITT on DMAed data. */
-+#define MCD_CRC32 0xc0300000
-+/* to perform CRC-32 on DMAed data. */
-+#define MCD_CSUMINET 0xc0400000
-+/* to perform internet checksums on DMAed data.*/
-+#define MCD_NO_CSUM 0xa0000000
-+/* to perform no checksumming. */
-+
-+#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM)
-+#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
-+
-+/*
-+ * Constants for the flags parameter
-+ */
-+#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */
-+#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */
-+#define MCD_TT_FLAGS_SP 0x00000004
-+/* Speculative prefetch(XLB) MCF547x/548x ONLY */
-+#define MCD_TT_FLAGS_PI 0x00000040 /* Precise Increment */
-+#define MCD_TT_FLAGS_MASK 0x000000ff
-+#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
-+
-+#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */
-+#define MCD_CHAIN_DMA /* TBD */
-+#define MCD_EU_DMA /* TBD */
-+#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */
-+#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */
-+
-+
-+/* these flags are valid for MCD_startDma
-+ * and the chained buffer descriptors */
-+#define MCD_BUF_READY 0x80000000
-+/* indicates that this buffer is now
-+ * under the DMA's control */
-+#define MCD_WRAP 0x20000000
-+/* to tell the FEC Dmas to wrap to the first BD */
-+#define MCD_INTERRUPT 0x10000000
-+/* to generate an interrupt after completion of the DMA. */
-+#define MCD_END_FRAME 0x08000000
-+/* tell the DMA to end the frame when transferring
-+ * last byte of data in buffer */
-+#define MCD_CRC_RESTART 0x40000000
-+/* to empty out the accumulated checksum
-+ prior to performing the DMA. */
-+
-+/* Defines for the FEC buffer descriptor control/status word*/
-+#define MCD_FEC_BUF_READY 0x8000
-+#define MCD_FEC_WRAP 0x2000
-+#define MCD_FEC_INTERRUPT 0x1000
-+#define MCD_FEC_END_FRAME 0x0800
-+
-+
-+/*
-+ * Defines for general intuitiveness
-+ */
-+
-+#define MCD_TRUE 1
-+#define MCD_FALSE 0
-+
-+/*
-+ * Three different cases for destination and source.
-+ */
-+#define MINUS1 -1
-+#define ZERO 0
-+#define PLUS1 1
-+
-+#ifndef DEFINESONLY
-+
-+/* Task Table Entry struct*/
-+typedef struct {
-+ u32 TDTstart; /* task descriptor table start */
-+ u32 TDTend; /* task descriptor table end */
-+ u32 varTab; /* variable table start */
-+ u32 FDTandFlags; /* function descriptor table start and flags */
-+ volatile u32 descAddrAndStatus;
-+ volatile u32 modifiedVarTab;
-+ u32 contextSaveSpace; /* context save space start */
-+ u32 literalBases;
-+} TaskTableEntry;
-+
-+
-+/* Chained buffer descriptor */
-+typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
-+struct MCD_bufDesc_struct {
-+ u32 flags;
-+/* flags describing the DMA */
-+ u32 csumResult;
-+/* checksum from checksumming performed since last checksum reset */
-+ s8 *srcAddr;
-+/* the address to move data from */
-+ s8 *destAddr;
-+/* the address to move data to */
-+ s8 *lastDestAddr;
-+/* the last address written to */
-+ u32 dmaSize;
-+/* the number of bytes to transfer independent of the transfer size */
-+ MCD_bufDesc *next;
-+/* next buffer descriptor in chain */
-+ u32 info;
-+/* private information about this descriptor; DMA does not affect it */
-+};
-+
-+/* Progress Query struct */
-+typedef volatile struct MCD_XferProg_struct {
-+ s8 *lastSrcAddr;
-+/* the most-recent or last, post-increment source address */
-+ s8 *lastDestAddr;
-+/* the most-recent or last, post-increment destination address */
-+ u32 dmaSize;
-+/* the amount of data transferred for the current buffer */
-+ MCD_bufDesc *currBufDesc;
-+/* pointer to the current buffer descriptor being DMAed */
-+} MCD_XferProg;
-+
-+
-+/* FEC buffer descriptor */
-+typedef volatile struct MCD_bufDescFec_struct {
-+ u16 statCtrl;
-+ u16 length;
-+ u32 dataPointer;
-+} MCD_bufDescFec;
-+
-+
-+/*************************************************************************/
-+/*
-+ * API function Prototypes - see MCD_dmaApi.c for further notes
-+ */
-+
-+/*
-+ * MCD_startDma starts a particular kind of DMA .
-+ */
-+int MCD_startDma(
-+ int channel,
-+/* the channel on which to run the DMA */
-+ s8 *srcAddr,
-+/* the address to move data from, or buffer-descriptor address */
-+ s16 srcIncr,
-+/* the amount to increment the source address per transfer */
-+ s8 *destAddr,
-+/* the address to move data to */
-+ s16 destIncr,
-+/* the amount to increment the destination address per transfer */
-+ u32 dmaSize,
-+/* the number of bytes to transfer independent of the transfer size */
-+ u32 xferSize,
-+/* the number bytes in of each data movement (1, 2, or 4) */
-+ u32 initiator,
-+/* what device initiates the DMA */
-+ int priority,
-+/* priority of the DMA */
-+ u32 flags,
-+/* flags describing the DMA */
-+ u32 funcDesc
-+/* a description of byte swapping, bit swapping, and CRC actions */
-+);
-+
-+/*
-+ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA
-+ * registers, relocating and creating the appropriate task structures, and
-+ * setting up some global settings
-+ */
-+int MCD_initDma(dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags);
-+
-+/*
-+ * MCD_dmaStatus() returns the status of the DMA on the requested channel.
-+ */
-+int MCD_dmaStatus(int channel);
-+
-+/*
-+ * MCD_XferProgrQuery() returns progress of DMA on requested channel
-+ */
-+int MCD_XferProgrQuery(int channel, MCD_XferProg *progRep);
-+
-+/*
-+ * MCD_killDma() halts the DMA on the requested channel, without any
-+ * intention of resuming the DMA.
-+ */
-+int MCD_killDma(int channel);
-+
-+/*
-+ * MCD_continDma() continues a DMA which as stopped due to encountering an
-+ * unready buffer descriptor.
-+ */
-+int MCD_continDma(int channel);
-+
-+/*
-+ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
-+ * running on that channel).
-+ */
-+int MCD_pauseDma(int channel);
-+
-+/*
-+ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
-+ * running on that channel).
-+ */
-+int MCD_resumeDma(int channel);
-+
-+/*
-+ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA
-+ */
-+int MCD_csumQuery(int channel, u32 *csum);
-+
-+/*
-+ * MCD_getCodeSize provides the packed size required by the microcoded task
-+ * and structures.
-+ */
-+int MCD_getCodeSize(void);
-+
-+/*
-+ * MCD_getVersion provides a pointer to a version string and returns a
-+ * version number.
-+ */
-+int MCD_getVersion(char **longVersion);
-+
-+/* macro for setting a location in the variable table */
-+#define MCD_SET_VAR(taskTab, idx, value) \
-+ ((u32 *)(taskTab)->varTab)[idx] = value
-+ /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
-+ so I'm avoiding surrounding it with "do {} while(0)" */
-+
-+#endif /* DEFINESONLY */
-+
-+#endif /* _MCD_API_H */
---- /dev/null
-+++ b/drivers/dma/MCD_dmaApi.c
-@@ -0,0 +1,1043 @@
-+/*
-+ * drivers/dma/MCD_dmaApi.c
-+ *
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include "MCD_dma.h"
-+#include "MCD_tasksInit.h"
-+#include "MCD_progCheck.h"
-+
-+/********************************************************************/
-+/*
-+ * This is an API-internal pointer to the DMA's registers
-+ */
-+dmaRegs *MCD_dmaBar;
-+
-+/*
-+ * These are the real and model task tables as generated by the
-+ * build process
-+ */
-+extern TaskTableEntry MCD_realTaskTableSrc[NCHANNELS];
-+extern TaskTableEntry MCD_modelTaskTableSrc[NUMOFVARIANTS];
-+
-+/*
-+ * However, this (usually) gets relocated to on-chip SRAM, at which
-+ * point we access them as these tables
-+ */
-+volatile TaskTableEntry *MCD_taskTable;
-+TaskTableEntry *MCD_modelTaskTable;
-+
-+
-+/*
-+ * MCD_chStatus[] is an array of status indicators for remembering
-+ * whether a DMA has ever been attempted on each channel, pausing
-+ * status, etc.
-+ */
-+static int MCD_chStatus[NCHANNELS] = {
-+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
-+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
-+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
-+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA
-+};
-+
-+/*
-+ * Prototypes for local functions
-+ */
-+static void MCD_memcpy(int *dest, int *src, u32 size);
-+static void MCD_resmActions(int channel);
-+
-+/*
-+ * Buffer descriptors used for storage of progress info for single Dmas
-+ * Also used as storage for the DMA for CRCs for single DMAs
-+ * Otherwise, the DMA does not parse these buffer descriptors
-+ */
-+#ifdef MCD_INCLUDE_EU
-+extern MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
-+#else
-+MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
-+#endif
-+MCD_bufDesc *MCD_relocBuffDesc;
-+
-+
-+/*
-+ * Defines for the debug control register's functions
-+ */
-+#define DBG_CTL_COMP1_TASK (0x00002000)
-+/* have comparator 1 look for a task # */
-+#define DBG_CTL_ENABLE (DBG_CTL_AUTO_ARM | \
-+ DBG_CTL_BREAK | \
-+ DBG_CTL_INT_BREAK | \
-+ DBG_CTL_COMP1_TASK)
-+#define DBG_CTL_DISABLE (DBG_CTL_AUTO_ARM | \
-+ DBG_CTL_INT_BREAK | \
-+ DBG_CTL_COMP1_TASK)
-+#define DBG_KILL_ALL_STAT (0xFFFFFFFF)
-+
-+/*
-+ * Offset to context save area where progress info is stored
-+ */
-+#define CSAVE_OFFSET 10
-+
-+/*
-+ * Defines for Byte Swapping
-+ */
-+#define MCD_BYTE_SWAP_KILLER 0xFFF8888F
-+#define MCD_NO_BYTE_SWAP_ATALL 0x00040000
-+
-+/*
-+ * Execution Unit Identifiers
-+ */
-+#define MAC 0 /* legacy - not used */
-+#define LUAC 1 /* legacy - not used */
-+#define CRC 2 /* legacy - not used */
-+#define LURC 3 /* Logic Unit with CRC */
-+
-+/*
-+ * Task Identifiers
-+ */
-+#define TASK_CHAINNOEU 0
-+#define TASK_SINGLENOEU 1
-+#ifdef MCD_INCLUDE_EU
-+#define TASK_CHAINEU 2
-+#define TASK_SINGLEEU 3
-+#define TASK_FECRX 4
-+#define TASK_FECTX 5
-+#else
-+#define TASK_CHAINEU 0
-+#define TASK_SINGLEEU 1
-+#define TASK_FECRX 2
-+#define TASK_FECTX 3
-+#endif
-+
-+/*
-+ * Structure to remember which variant is on which channel
-+ */
-+struct MCD_remVariants_struct {
-+ int remDestRsdIncr[NCHANNELS]; /* -1,0,1 */
-+ int remSrcRsdIncr[NCHANNELS]; /* -1,0,1 */
-+ s16 remDestIncr[NCHANNELS]; /* DestIncr */
-+ s16 remSrcIncr[NCHANNELS]; /* srcIncr */
-+ u32 remXferSize[NCHANNELS]; /* xferSize */
-+};
-+
-+/*
-+ * Structure to remember the startDma parameters for each channel
-+ */
-+struct MCD_remVariants_struct MCD_remVariants;
-+
-+/********************************************************************/
-+/*
-+ * Function: MCD_initDma
-+ * Purpose: Initializes the DMA API by setting up a pointer to the DMA
-+ * registers, relocating and creating the appropriate task
-+ * structures, and setting up some global settings
-+ * Arguments:
-+ * dmaBarAddr - pointer to the multichannel DMA registers
-+ * taskTableDest - location to move DMA task code and structs to
-+ * flags - operational parameters
-+ * Return Value:
-+ * MCD_TABLE_UNALIGNED if taskTableDest is not 512-byte aligned
-+ * MCD_OK otherwise
-+ */
-+extern u32 MCD_funcDescTab0[];
-+
-+int MCD_initDma(dmaRegs *dmaBarAddr, void *taskTableDest, u32 flags)
-+{
-+ int i;
-+ TaskTableEntry *entryPtr;
-+
-+ /* Setup the local pointer to register set */
-+ MCD_dmaBar = dmaBarAddr;
-+
-+ /* Do we need to move/create a task table */
-+ if ((flags & MCD_RELOC_TASKS) != 0) {
-+ int fixedSize;
-+ u32 *fixedPtr;
-+ int varTabsOffset, funcDescTabsOffset;
-+ int contextSavesOffset;
-+ int taskDescTabsOffset;
-+ int taskTableSize, varTabsSize;
-+ int funcDescTabsSize, contextSavesSize;
-+ int taskDescTabSize;
-+ int i;
-+
-+ /* Check if physical address is
-+ * aligned on 512 byte boundary */
-+ if (((u32)taskTableDest & 0x000001ff) != 0)
-+ return MCD_TABLE_UNALIGNED;
-+
-+ MCD_taskTable = taskTableDest;
-+ /* set up local pointer to task Table */
-+
-+ /*
-+ * Create a task table:
-+ * compute aligned base offsets for variable tables and
-+ * function descriptor tables, then
-+ * loop through the task table and setup the pointers
-+ *copy over model task table with the the actual
-+ *task descriptor tables
-+ */
-+ taskTableSize = NCHANNELS * sizeof(TaskTableEntry);
-+ /* Align variable tables to size */
-+ varTabsOffset = taskTableSize + (u32)taskTableDest;
-+ if ((varTabsOffset & (VAR_TAB_SIZE - 1)) != 0)
-+ varTabsOffset = (varTabsOffset + VAR_TAB_SIZE)
-+ & (~VAR_TAB_SIZE);
-+ /* Align function descriptor tables */
-+ varTabsSize = NCHANNELS * VAR_TAB_SIZE;
-+ funcDescTabsOffset = varTabsOffset + varTabsSize;
-+
-+ if ((funcDescTabsOffset & (FUNCDESC_TAB_SIZE - 1)) != 0)
-+ funcDescTabsOffset = (funcDescTabsOffset
-+ + FUNCDESC_TAB_SIZE) &
-+ (~FUNCDESC_TAB_SIZE);
-+
-+ funcDescTabsSize = FUNCDESC_TAB_NUM * FUNCDESC_TAB_SIZE;
-+ contextSavesOffset = funcDescTabsOffset
-+ + funcDescTabsSize;
-+ contextSavesSize = (NCHANNELS * CONTEXT_SAVE_SIZE);
-+ fixedSize = taskTableSize + varTabsSize +
-+ funcDescTabsSize + contextSavesSize;
-+
-+ /* Zero the thing out */
-+ fixedPtr = (u32 *)taskTableDest;
-+ for (i = 0; i < (fixedSize/4); i++)
-+ fixedPtr[i] = 0;
-+
-+ entryPtr = (TaskTableEntry *)MCD_taskTable;
-+ /* Set up fixed pointers */
-+ for (i = 0; i < NCHANNELS; i++) {
-+ entryPtr[i].varTab = (u32)varTabsOffset;
-+ /* update ptr to local value */
-+ entryPtr[i].FDTandFlags =
-+ (u32)funcDescTabsOffset | MCD_TT_FLAGS_DEF;
-+ entryPtr[i].contextSaveSpace =
-+ (u32)contextSavesOffset;
-+ varTabsOffset += VAR_TAB_SIZE;
-+#ifdef MCD_INCLUDE_EU
-+ /* if not there is only one,
-+ * just point to the same one */
-+ funcDescTabsOffset += FUNCDESC_TAB_SIZE;
-+#endif
-+ contextSavesOffset += CONTEXT_SAVE_SIZE;
-+ }
-+ /* Copy over the function descriptor table */
-+ for (i = 0; i < FUNCDESC_TAB_NUM; i++) {
-+ MCD_memcpy((void *)(entryPtr[i].FDTandFlags
-+ & ~MCD_TT_FLAGS_MASK),
-+ (void *)MCD_funcDescTab0,
-+ FUNCDESC_TAB_SIZE);
-+ }
-+
-+ /* Copy model task table to where the
-+ * context save stuff leaves off */
-+ MCD_modelTaskTable =
-+ (TaskTableEntry *)contextSavesOffset;
-+
-+ MCD_memcpy((void *)MCD_modelTaskTable,
-+ (void *)MCD_modelTaskTableSrc,
-+ NUMOFVARIANTS * sizeof(TaskTableEntry));
-+
-+ /* Point to local version of model task table */
-+ entryPtr = MCD_modelTaskTable;
-+ taskDescTabsOffset = (u32)MCD_modelTaskTable +
-+ (NUMOFVARIANTS * sizeof(TaskTableEntry));
-+
-+ /* Copy actual task code and update TDT ptrs
-+ * in local model task table */
-+ for (i = 0; i < NUMOFVARIANTS; i++) {
-+ taskDescTabSize = entryPtr[i].TDTend
-+ - entryPtr[i].TDTstart + 4;
-+ MCD_memcpy((void *)taskDescTabsOffset,
-+ (void *)entryPtr[i].TDTstart,
-+ taskDescTabSize);
-+ entryPtr[i].TDTstart =
-+ (u32)taskDescTabsOffset;
-+ taskDescTabsOffset += taskDescTabSize;
-+ entryPtr[i].TDTend =
-+ (u32)taskDescTabsOffset - 4;
-+ }
-+#ifdef MCD_INCLUDE_EU
-+ /*
-+ * Tack single DMA BDs onto end of
-+ * code so API controls where
-+ * they are since DMA might write to them
-+ */
-+ MCD_relocBuffDesc = (MCD_bufDesc *)
-+ (entryPtr[NUMOFVARIANTS - 1].TDTend + 4);
-+#else
-+ /*
-+ * DMA does not touch them so they
-+ * can be wherever and we don't need to
-+ * waste SRAM on them
-+ */
-+ MCD_relocBuffDesc = MCD_singleBufDescs;
-+#endif
-+ } else {
-+ /*
-+ * Point the would-be relocated task tables and
-+ * the buffer descriptors
-+ * to the ones the linker generated
-+ */
-+ if (((u32)MCD_realTaskTableSrc & 0x000001ff) != 0)
-+ return MCD_TABLE_UNALIGNED;
-+
-+ entryPtr = MCD_realTaskTableSrc;
-+ for (i = 0; i < NCHANNELS; i++) {
-+ if (((entryPtr[i].varTab
-+ & (VAR_TAB_SIZE - 1)) != 0) ||
-+ ((entryPtr[i].FDTandFlags &
-+ (FUNCDESC_TAB_SIZE - 1)) != 0))
-+ return MCD_TABLE_UNALIGNED;
-+ }
-+
-+ MCD_taskTable = MCD_realTaskTableSrc;
-+ MCD_modelTaskTable = MCD_modelTaskTableSrc;
-+ MCD_relocBuffDesc = MCD_singleBufDescs;
-+ }
-+
-+ /* Make all channels inactive,
-+ * and remember them as such: */
-+ MCD_dmaBar->taskbar = (u32) MCD_taskTable;
-+ for (i = 0; i < NCHANNELS; i++) {
-+ MCD_dmaBar->taskControl[i] = 0x0;
-+ MCD_chStatus[i] = MCD_NO_DMA;
-+ }
-+
-+ /* Set up pausing mechanism to inactive state: */
-+ MCD_dmaBar->debugComp1 = 0;
-+ MCD_dmaBar->debugComp2 = 0;
-+ MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
-+ MCD_dmaBar->debugStatus = DBG_KILL_ALL_STAT;
-+
-+ /* Enable or disable commbus prefetch */
-+ if ((flags & MCD_COMM_PREFETCH_EN) != 0)
-+ MCD_dmaBar->ptdControl &= ~PTD_CTL_COMM_PREFETCH;
-+ else
-+ MCD_dmaBar->ptdControl |= PTD_CTL_COMM_PREFETCH;
-+
-+ return MCD_OK;
-+}
-+/*********************** End of MCD_initDma() ***********************/
-+
-+/********************************************************************/
-+/* Function: MCD_dmaStatus
-+ * Purpose: Returns the status of the DMA on the requested channel
-+ * Arguments: channel - channel number
-+ * Returns: Predefined status indicators
-+ */
-+int MCD_dmaStatus(int channel)
-+{
-+ u16 tcrValue;
-+
-+ if ((channel < 0) || (channel >= NCHANNELS))
-+ return MCD_CHANNEL_INVALID;
-+
-+ tcrValue = MCD_dmaBar->taskControl[channel];
-+ if ((tcrValue & TASK_CTL_EN) == 0) {
-+ /* Nothing running if last reported
-+ * with task enabled */
-+ if (MCD_chStatus[channel] == MCD_RUNNING
-+ || MCD_chStatus[channel] == MCD_IDLE)
-+ MCD_chStatus[channel] = MCD_DONE;
-+ } else /* something is running */{
-+ /* There are three possibilities:
-+ * paused, running or idle. */
-+ if (MCD_chStatus[channel] == MCD_RUNNING
-+ || MCD_chStatus[channel] == MCD_IDLE) {
-+ MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT;
-+ /* Determine which initiator
-+ * is asserted. */
-+ if ((MCD_dmaBar->ptdDebug >> channel) & 0x1)
-+ MCD_chStatus[channel] = MCD_RUNNING;
-+ else
-+ MCD_chStatus[channel] = MCD_IDLE;
-+ /* Do not change the status if it is already paused */
-+ }
-+ }
-+ return MCD_chStatus[channel];
-+}
-+/******************** End of MCD_dmaStatus() ************************/
-+
-+/********************************************************************/
-+/* Function: MCD_startDma
-+ * Ppurpose: Starts a particular kind of DMA
-+ * Arguments: see below
-+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ */
-+
-+int MCD_startDma(
-+ int channel,
-+/* the channel on which to run the DMA */
-+ s8 *srcAddr,
-+/* the address to move data from,
-+ * or physical buffer-descriptor address */
-+ s16 srcIncr,
-+/* the amount to increment the source
-+ * address per transfer */
-+ s8 *destAddr,
-+/* the address to move data to */
-+ s16 destIncr,
-+/* the amount to increment the
-+ * destination address per transfer */
-+ u32 dmaSize,
-+/* the number of bytes to transfer
-+ * independent of the transfer size */
-+ u32 xferSize,
-+/* the number bytes in of each data
-+ * movement (1, 2, or 4) */
-+ u32 initiator,
-+/* what device initiates the DMA */
-+ int priority,
-+/* priority of the DMA */
-+ u32 flags,
-+/* flags describing the DMA */
-+ u32 funcDesc
-+/* a description of byte swapping,
-+ * bit swapping, and CRC actions */
-+#ifdef MCD_NEED_ADDR_TRANS
-+ s8 *srcAddrVirt
-+/* virtual buffer descriptor address TBD*/
-+#endif
-+)
-+{
-+ int srcRsdIncr, destRsdIncr;
-+ int *cSave;
-+ short xferSizeIncr;
-+ int tcrCount = 0;
-+#ifdef MCD_INCLUDE_EU
-+ u32 *realFuncArray;
-+#endif
-+
-+ if ((channel < 0) || (channel >= NCHANNELS))
-+ return MCD_CHANNEL_INVALID;
-+
-+#ifndef MCD_INCLUDE_EU
-+ funcDesc = MCD_FUNC_NOEU1;
-+#endif
-+
-+#ifdef MCD_DEBUG
-+ printf("startDma:Setting up params\n");
-+#endif
-+
-+ /* Enable task-wise priority */
-+ MCD_dmaBar->ptdControl |= (u16) 0x8000;
-+
-+ /* Calculate additional parameters
-+ * to the regular DMA calls. */
-+ srcRsdIncr = srcIncr < 0 ? -1 : (srcIncr > 0 ? 1 : 0);
-+ destRsdIncr = destIncr < 0 ? -1 : (destIncr > 0 ? 1 : 0);
-+ xferSizeIncr = (xferSize & 0xffff) | 0x20000000;
-+
-+ /* Remember which variant is running for each channel */
-+ MCD_remVariants.remSrcRsdIncr[channel] = srcRsdIncr;
-+ MCD_remVariants.remDestRsdIncr[channel] = destRsdIncr;
-+ MCD_remVariants.remDestIncr[channel] = destIncr;
-+ MCD_remVariants.remSrcIncr[channel] = srcIncr;
-+ MCD_remVariants.remXferSize[channel] = xferSize;
-+
-+ cSave = (int *)(MCD_taskTable[channel].contextSaveSpace)
-+ + CSAVE_OFFSET
-+ + CURRBD;
-+
-+#ifdef MCD_INCLUDE_EU
-+ realFuncArray = (u32 *)(MCD_taskTable[channel].FDTandFlags
-+ & 0xffffff00);
-+
-+ /*
-+ * Modify the LURC's normal and byte-residue-loop functions
-+ * according to parameter.
-+ */
-+ switch (xferSize) {
-+ case 4:
-+ realFuncArray[(LURC*16)] = funcDesc;
-+ break;
-+ case 2:
-+ realFuncArray[(LURC*16)] = funcDesc & 0xfffff00f;
-+ break;
-+ case 1:
-+ default:
-+ realFuncArray[(LURC*16)] = funcDesc & 0xffff000f;
-+ break;
-+ }
-+
-+ realFuncArray[(LURC*16 + 1)] = 0
-+ | (funcDesc & MCD_BYTE_SWAP_KILLER)
-+ | MCD_NO_BYTE_SWAP_ATALL;
-+#endif
-+
-+ /* Write the initiator field in the TCR and
-+ * set the initiator-hold bit*/
-+ MCD_dmaBar->taskControl[channel] = 0
-+ | (initiator << 8)
-+ | TASK_CTL_HIPRITSKEN
-+ | TASK_CTL_HLDINITNUM;
-+
-+ /*
-+ * Current versions of the MPC8220 MCD have a hardware quirk that could
-+ * cause the write to the TCR to collide with an MDE access to the
-+ * initiator-register file, so we have to verify that the write occurred
-+ * correctly by reading back the value. On MCF547x/8x devices and any
-+ * future revisions of the MPC8220, this loop will not be entered.
-+ */
-+ while (((MCD_dmaBar->taskControl[channel] & 0x1fff) !=
-+ ((initiator << 8) | TASK_CTL_HIPRITSKEN
-+ | TASK_CTL_HLDINITNUM)) && (tcrCount < 1000)) {
-+ tcrCount++;
-+ MCD_dmaBar->taskControl[channel] = 0
-+ | (initiator << 8)
-+ | TASK_CTL_HIPRITSKEN
-+ | TASK_CTL_HLDINITNUM;
-+ }
-+
-+ MCD_dmaBar->priority[channel] = (u8)priority & PRIORITY_PRI_MASK;
-+
-+ if (channel < 8 && channel >= 0) {
-+ MCD_dmaBar->taskSize0 &= ~(0xf << (7-channel)*4);
-+ MCD_dmaBar->taskSize0
-+ |= (xferSize & 3) << (((7 - channel)*4) + 2);
-+ MCD_dmaBar->taskSize0
-+ |= (xferSize & 3) << ((7 - channel)*4);
-+ } else {
-+ MCD_dmaBar->taskSize1 &= ~(0xf << (15-channel)*4);
-+ MCD_dmaBar->taskSize1
-+ |= (xferSize & 3) << (((15 - channel)*4) + 2);
-+ MCD_dmaBar->taskSize1
-+ |= (xferSize & 3) << ((15 - channel)*4);
-+ }
-+
-+ /* Setup task table flags/options */
-+ MCD_taskTable[channel].FDTandFlags &= ~MCD_TT_FLAGS_MASK;
-+ MCD_taskTable[channel].FDTandFlags |= (MCD_TT_FLAGS_MASK & flags);
-+
-+ if (flags & MCD_FECTX_DMA) {
-+ /* TDTStart and TDTEnd */
-+ MCD_taskTable[channel].TDTstart =
-+ MCD_modelTaskTable[TASK_FECTX].TDTstart;
-+ MCD_taskTable[channel].TDTend =
-+ MCD_modelTaskTable[TASK_FECTX].TDTend;
-+ MCD_startDmaENetXmit(srcAddr, srcAddr, destAddr,
-+ MCD_taskTable, channel);
-+ } else if (flags & MCD_FECRX_DMA) {
-+ /* TDTStart and TDTEnd */
-+ MCD_taskTable[channel].TDTstart =
-+ MCD_modelTaskTable[TASK_FECRX].TDTstart;
-+ MCD_taskTable[channel].TDTend =
-+ MCD_modelTaskTable[TASK_FECRX].TDTend;
-+ MCD_startDmaENetRcv(srcAddr, srcAddr, destAddr,
-+ MCD_taskTable, channel);
-+ } else if (flags & MCD_SINGLE_DMA) {
-+ /*
-+ * This buffer descriptor is used for storing off
-+ * initial parameters for later progress query
-+ * calculation and for the DMA to write the resulting
-+ * checksum. The DMA does not use this to determine how
-+ * to operate, that info is passed with the init routine
-+ */
-+ MCD_relocBuffDesc[channel].srcAddr = srcAddr;
-+ MCD_relocBuffDesc[channel].destAddr = destAddr;
-+ MCD_relocBuffDesc[channel].lastDestAddr = destAddr;
-+ MCD_relocBuffDesc[channel].dmaSize = dmaSize;
-+ MCD_relocBuffDesc[channel].flags = 0;
-+ /* not used */
-+ MCD_relocBuffDesc[channel].csumResult = 0;
-+ /* not used */
-+ MCD_relocBuffDesc[channel].next = 0;
-+ /* not used */
-+
-+ /* Initialize the progress-querying stuff
-+ * to show no progress:*/
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ SRCPTR + CSAVE_OFFSET] = (int)srcAddr;
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ DESTPTR + CSAVE_OFFSET] = (int)destAddr;
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ DCOUNT + CSAVE_OFFSET] = 0;
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ CURRBD + CSAVE_OFFSET] =
-+ (u32) &(MCD_relocBuffDesc[channel]);
-+
-+ if ((funcDesc == MCD_FUNC_NOEU1)
-+ || (funcDesc == MCD_FUNC_NOEU2)) {
-+ /* TDTStart and TDTEnd */
-+ MCD_taskTable[channel].TDTstart =
-+ MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart;
-+ MCD_taskTable[channel].TDTend =
-+ MCD_modelTaskTable[TASK_SINGLENOEU].TDTend;
-+ MCD_startDmaSingleNoEu(srcAddr, srcIncr, destAddr,
-+ destIncr, dmaSize, xferSizeIncr, flags,
-+ (int *)&(MCD_relocBuffDesc[channel]),
-+ cSave, MCD_taskTable, channel);
-+ } else {
-+ /* TDTStart and TDTEnd */
-+ MCD_taskTable[channel].TDTstart =
-+ MCD_modelTaskTable[TASK_SINGLEEU].TDTstart;
-+ MCD_taskTable[channel].TDTend =
-+ MCD_modelTaskTable[TASK_SINGLEEU].TDTend;
-+ MCD_startDmaSingleEu(srcAddr, srcIncr, destAddr,
-+ destIncr, dmaSize, xferSizeIncr, flags,
-+ (int *)&(MCD_relocBuffDesc[channel]),
-+ cSave, MCD_taskTable, channel);
-+ }
-+ } else /* Chained DMA */ {
-+ /* Initialize the progress-querying
-+ * stuff to show no progress:*/
-+#if 1 /* (!defined(MCD_NEED_ADDR_TRANS)) */
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ SRCPTR + CSAVE_OFFSET]
-+ = (int)((MCD_bufDesc *) srcAddr)->srcAddr;
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ DESTPTR + CSAVE_OFFSET]
-+ = (int)((MCD_bufDesc *) srcAddr)->destAddr;
-+#else
-+ /* if using address translation, need the
-+ * virtual addr of the first buffdesc */
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ SRCPTR + CSAVE_OFFSET]
-+ = (int)((MCD_bufDesc *) srcAddrVirt)->srcAddr;
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ DESTPTR + CSAVE_OFFSET]
-+ = (int)((MCD_bufDesc *) srcAddrVirt)->destAddr;
-+#endif
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ DCOUNT + CSAVE_OFFSET] = 0;
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ CURRBD + CSAVE_OFFSET] = (u32) srcAddr;
-+
-+ if (funcDesc == MCD_FUNC_NOEU1
-+ || funcDesc == MCD_FUNC_NOEU2) {
-+ /* TDTStart and TDTEnd */
-+ MCD_taskTable[channel].TDTstart =
-+ MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart;
-+ MCD_taskTable[channel].TDTend =
-+ MCD_modelTaskTable[TASK_CHAINNOEU].TDTend;
-+ MCD_startDmaChainNoEu((int *)srcAddr, srcIncr,
-+ destIncr, xferSize, xferSizeIncr, cSave,
-+ MCD_taskTable, channel);
-+ } else {
-+ /* TDTStart and TDTEnd */
-+ MCD_taskTable[channel].TDTstart =
-+ MCD_modelTaskTable[TASK_CHAINEU].TDTstart;
-+ MCD_taskTable[channel].TDTend =
-+ MCD_modelTaskTable[TASK_CHAINEU].TDTend;
-+ MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr,
-+ xferSize, xferSizeIncr, cSave,
-+ MCD_taskTable, channel);
-+ }
-+ }
-+
-+ MCD_chStatus[channel] = MCD_IDLE;
-+ return MCD_OK;
-+}
-+
-+/************************ End of MCD_startDma() *********************/
-+
-+/********************************************************************/
-+/* Function: MCD_XferProgrQuery
-+ * Purpose: Returns progress of DMA on requested channel
-+ * Arguments: channel - channel to retrieve progress for
-+ * progRep - pointer to user supplied MCD_XferProg struct
-+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ *
-+ * Notes:
-+ * MCD_XferProgrQuery() upon completing or after aborting a DMA, or
-+ * while the DMA is in progress, this function returns the first
-+ * DMA-destination address not (or not yet) used in the DMA. When
-+ * encountering a non-ready buffer descriptor, the information for
-+ * the last completed descriptor is returned.
-+ *
-+ * MCD_XferProgQuery() has to avoid the possibility of getting
-+ * partially-updated information in the event that we should happen
-+ * to query DMA progress just as the DMA is updating it. It does that
-+ * by taking advantage of the fact context is not saved frequently for
-+ * the most part. We therefore read it at least twice until we get the
-+ * same information twice in a row.
-+ *
-+ * Because a small, but not insignificant, amount of time is required
-+ * to write out the progress-query information, especially upon
-+ * completion of the DMA, it would be wise to guarantee some time lag
-+ * between successive readings of the progress-query information.
-+ */
-+
-+/*
-+ * How many iterations of the loop below to execute to stabilize values
-+ */
-+#define STABTIME 0
-+
-+int MCD_XferProgrQuery(int channel, MCD_XferProg *progRep)
-+{
-+ MCD_XferProg prevRep;
-+ int again;
-+ /* true if we are to try again to get consistent results */
-+ int i; /* used as a time-waste counter */
-+ int destDiffBytes;
-+ /* Total number of bytes that we think actually got xfered. */
-+ int numIterations; /* number of iterations */
-+ int bytesNotXfered; /* bytes that did not get xfered. */
-+ s8 *LWAlignedInitDestAddr, *LWAlignedCurrDestAddr;
-+ int subModVal, addModVal;
-+ /* Mode values to added and subtracted from the final destAddr */
-+
-+ if ((channel < 0) || (channel >= NCHANNELS))
-+ return MCD_CHANNEL_INVALID;
-+
-+ /* Read a trial value for the progress-reporting values*/
-+ prevRep.lastSrcAddr =
-+ (s8 *)((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ SRCPTR + CSAVE_OFFSET];
-+ prevRep.lastDestAddr =
-+ (s8 *)((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ DESTPTR + CSAVE_OFFSET];
-+ prevRep.dmaSize =
-+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[
-+ DCOUNT + CSAVE_OFFSET];
-+ prevRep.currBufDesc =
-+ (MCD_bufDesc *)((volatile int *)MCD_taskTable[
-+ channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET];
-+
-+ /* Repeatedly reread those values until
-+ * they match previous values: */
-+ do {
-+ /* Take a little bit of time to ensure stability: */
-+ for (i = 0; i < STABTIME; i++)
-+ i += i >> 2;
-+ /* make sure this loop does something so that it
-+ doesn't get optimized out */
-+ /* Check them again: */
-+ progRep->lastSrcAddr =
-+ (s8 *)((volatile int *)MCD_taskTable[
-+ channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET];
-+ progRep->lastDestAddr =
-+ (s8 *)((volatile int *)MCD_taskTable[
-+ channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET];
-+ progRep->dmaSize = ((volatile int *)MCD_taskTable[
-+ channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET];
-+ progRep->currBufDesc =
-+ (MCD_bufDesc *)((volatile int *)MCD_taskTable[
-+ channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET];
-+
-+ /* See if they match: */
-+ if (prevRep.lastSrcAddr != progRep->lastSrcAddr
-+ || prevRep.lastDestAddr != progRep->lastDestAddr
-+ || prevRep.dmaSize != progRep->dmaSize
-+ || prevRep.currBufDesc != progRep->currBufDesc) {
-+ /* If they don't match, remember previous
-+ values and try again:*/
-+ prevRep.lastSrcAddr = progRep->lastSrcAddr;
-+ prevRep.lastDestAddr = progRep->lastDestAddr;
-+ prevRep.dmaSize = progRep->dmaSize;
-+ prevRep.currBufDesc = progRep->currBufDesc;
-+ again = MCD_TRUE;
-+ } else
-+ again = MCD_FALSE;
-+ } while (again == MCD_TRUE);
-+
-+
-+ /* Update dmaSize and lastDestAddr */
-+ switch (MCD_remVariants.remDestRsdIncr[channel]) {
-+ case MINUS1:
-+ subModVal = ((int)progRep->lastDestAddr)
-+ & ((MCD_remVariants.remXferSize[channel]) - 1);
-+ addModVal = ((int)progRep->currBufDesc->destAddr)
-+ & ((MCD_remVariants.remXferSize[channel]) - 1);
-+ LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr)
-+ - addModVal;
-+ LWAlignedCurrDestAddr = (progRep->lastDestAddr) - subModVal;
-+ destDiffBytes = LWAlignedInitDestAddr - LWAlignedCurrDestAddr;
-+ bytesNotXfered =
-+ (destDiffBytes/MCD_remVariants.remDestIncr[channel]) *
-+ (MCD_remVariants.remDestIncr[channel]
-+ + MCD_remVariants.remXferSize[channel]);
-+ progRep->dmaSize = destDiffBytes - bytesNotXfered
-+ + addModVal - subModVal;
-+ break;
-+ case ZERO:
-+ progRep->lastDestAddr = progRep->currBufDesc->destAddr;
-+ break;
-+ case PLUS1:
-+ /* This value has to be subtracted
-+ from the final calculated dmaSize. */
-+ subModVal = ((int)progRep->currBufDesc->destAddr)
-+ & ((MCD_remVariants.remXferSize[channel]) - 1);
-+ /* These bytes are already in lastDestAddr. */
-+ addModVal = ((int)progRep->lastDestAddr)
-+ & ((MCD_remVariants.remXferSize[channel]) - 1);
-+ LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr)
-+ - subModVal;
-+ LWAlignedCurrDestAddr = (progRep->lastDestAddr) - addModVal;
-+ destDiffBytes = (progRep->lastDestAddr - LWAlignedInitDestAddr);
-+ numIterations = (LWAlignedCurrDestAddr -
-+ LWAlignedInitDestAddr)/MCD_remVariants.remDestIncr[channel];
-+ bytesNotXfered = numIterations *
-+ (MCD_remVariants.remDestIncr[channel]
-+ - MCD_remVariants.remXferSize[channel]);
-+ progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ /* This covers M1,P1,Z for source */
-+ switch (MCD_remVariants.remSrcRsdIncr[channel]) {
-+ case MINUS1:
-+ progRep->lastSrcAddr =
-+ progRep->currBufDesc->srcAddr +
-+ (MCD_remVariants.remSrcIncr[channel] *
-+ (progRep->dmaSize/MCD_remVariants.remXferSize[channel]));
-+ break;
-+ case ZERO:
-+ progRep->lastSrcAddr = progRep->currBufDesc->srcAddr;
-+ break;
-+ case PLUS1:
-+ progRep->lastSrcAddr =
-+ progRep->currBufDesc->srcAddr +
-+ (MCD_remVariants.remSrcIncr[channel] *
-+ (progRep->dmaSize/MCD_remVariants.remXferSize[channel]));
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ return MCD_OK;
-+}
-+/******************* End of MCD_XferProgrQuery() ********************/
-+
-+/********************************************************************/
-+/* MCD_resmActions() does the majority of the actions of a DMA resume.
-+ * It is called from MCD_killDma() and MCD_resumeDma(). It has to be
-+ * a separate function because the kill function has to negate the task
-+ * enable before resuming it, but the resume function has to do nothing
-+ * if there is no DMA on that channel (i.e., if the enable bit is 0).
-+ */
-+static void MCD_resmActions(int channel)
-+{
-+ MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
-+ MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus;
-+
-+ /* Determine which initiators are asserted */
-+ MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT;
-+
-+ if ((MCD_dmaBar->ptdDebug >> channel) & 0x1)
-+ MCD_chStatus[channel] = MCD_RUNNING;
-+ else
-+ MCD_chStatus[channel] = MCD_IDLE;
-+}
-+/********************* End of MCD_resmActions() *********************/
-+
-+/********************************************************************/
-+/* Function: MCD_killDma
-+ * Purpose: Halt the DMA on the requested channel, without any
-+ * intention of resuming the DMA.
-+ * Arguments: channel - requested channel
-+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ *
-+ * Notes:
-+ * A DMA may be killed from any state, including paused state, and it
-+ * always goes to the MCD_HALTED state even if it is killed while in
-+ * the MCD_NO_DMA or MCD_IDLE states.
-+ */
-+int MCD_killDma(int channel)
-+{
-+ if ((channel < 0) || (channel >= NCHANNELS))
-+ return MCD_CHANNEL_INVALID;
-+
-+ MCD_dmaBar->taskControl[channel] = 0x0;
-+
-+ /* Clean up after a paused task */
-+ if (MCD_chStatus[channel] == MCD_PAUSED) {
-+ MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
-+ MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus;
-+ }
-+
-+ MCD_chStatus[channel] = MCD_HALTED;
-+
-+ return MCD_OK;
-+}
-+/************************ End of MCD_killDma() **********************/
-+
-+/********************************************************************/
-+/* Function: MCD_continDma
-+ * Purpose: Continue a DMA which as stopped due to encountering an
-+ * unready buffer descriptor.
-+ * Arguments: channel - channel to continue the DMA on
-+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ *
-+ * Notes:
-+ * This routine does not check to see if there is a task which can
-+ * be continued. Also this routine should not be used with single DMAs.
-+ */
-+int MCD_continDma(int channel)
-+{
-+ if ((channel < 0) || (channel >= NCHANNELS))
-+ return MCD_CHANNEL_INVALID;
-+
-+ MCD_dmaBar->taskControl[channel] |= TASK_CTL_EN;
-+ MCD_chStatus[channel] = MCD_RUNNING;
-+
-+ return MCD_OK;
-+}
-+/********************** End of MCD_continDma() **********************/
-+
-+/*********************************************************************
-+ * MCD_pauseDma() and MCD_resumeDma() below use the DMA's debug unit
-+ * to freeze a task and resume it. We freeze a task by breakpointing
-+ * on the stated task. That is, not any specific place in the task,
-+ * but any time that task executes. In particular, when that task
-+ * executes, we want to freeze that task and only that task.
-+ *
-+ * The bits of the debug control register influence interrupts vs.
-+ * breakpoints as follows:
-+ * - Bits 14 and 0 enable or disable debug functions. If enabled, you
-+ * will get the interrupt but you may or may not get a breakpoint.
-+ * - Bits 2 and 1 decide whether you also get a breakpoint in addition
-+ * to an interrupt.
-+ *
-+ * The debug unit can do these actions in response to either internally
-+ * detected breakpoint conditions from the comparators, or in response
-+ * to the external breakpoint pin, or both.
-+ * - Bits 14 and 1 perform the above-described functions for
-+ * internally-generated conditions, i.e., the debug comparators.
-+ * - Bits 0 and 2 perform the above-described functions for external
-+ * conditions, i.e., the breakpoint external pin.
-+ *
-+ * Note that, although you "always" get the interrupt when you turn
-+ * the debug functions, the interrupt can nevertheless, if desired, be
-+ * masked by the corresponding bit in the PTD's IMR. Note also that
-+ * this means that bits 14 and 0 must enable debug functions before
-+ * bits 1 and 2, respectively, have any effect.
-+ *
-+ * NOTE: It's extremely important to not pause more than one DMA channel
-+ * at a time.
-+ ********************************************************************/
-+
-+/********************************************************************/
-+/* Function: MCD_pauseDma
-+ * Purpose: Pauses the DMA on a given channel (if any DMA is running
-+ * on that channel).
-+ * Arguments: channel
-+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ */
-+int MCD_pauseDma(int channel)
-+{
-+ if ((channel < 0) || (channel >= NCHANNELS))
-+ return MCD_CHANNEL_INVALID;
-+
-+ if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN) {
-+ MCD_dmaBar->debugComp1 = channel;
-+ MCD_dmaBar->debugControl =
-+ DBG_CTL_ENABLE | (1 << (channel + 16));
-+ MCD_chStatus[channel] = MCD_PAUSED;
-+ }
-+
-+ return MCD_OK;
-+}
-+/************************* End of MCD_pauseDma() ********************/
-+
-+/********************************************************************/
-+/* Function: MCD_resumeDma
-+ * Purpose: Resumes the DMA on a given channel (if any DMA is
-+ * running on that channel).
-+ * Arguments: channel - channel on which to resume DMA
-+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ */
-+int MCD_resumeDma(int channel)
-+{
-+ if ((channel < 0) || (channel >= NCHANNELS))
-+ return MCD_CHANNEL_INVALID;
-+
-+ if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN)
-+ MCD_resmActions(channel);
-+
-+ return MCD_OK;
-+}
-+/************************ End of MCD_resumeDma() ********************/
-+
-+/********************************************************************/
-+/* Function: MCD_csumQuery
-+ * Purpose: Provide the checksum after performing a non-chained DMA
-+ * Arguments: channel - channel to report on
-+ * csum - pointer to where to write the checksum/CRC
-+ * Returns: MCD_ERROR if the channel is invalid, else MCD_OK
-+ *
-+ * Notes:
-+ *
-+ */
-+int MCD_csumQuery(int channel, u32 *csum)
-+{
-+#ifdef MCD_INCLUDE_EU
-+ if ((channel < 0) || (channel >= NCHANNELS))
-+ return MCD_CHANNEL_INVALID;
-+
-+ *csum = MCD_relocBuffDesc[channel].csumResult;
-+ return MCD_OK;
-+#else
-+ return MCD_ERROR;
-+#endif
-+}
-+/*********************** End of MCD_resumeDma() *********************/
-+
-+/********************************************************************/
-+/* Function: MCD_getCodeSize
-+ * Purpose: Provide the size requirements of the microcoded tasks
-+ * Returns: Size in bytes
-+ */
-+int MCD_getCodeSize(void)
-+{
-+#ifdef MCD_INCLUDE_EU
-+ return 0x2b64;
-+#else
-+ return 0x1744;
-+#endif
-+}
-+/********************** End of MCD_getCodeSize() ********************/
-+
-+/********************************************************************/
-+/* Function: MCD_getVersion
-+ * Purpose: Provide the version string and number
-+ * Arguments: longVersion - user supplied pointer to a pointer to a char
-+ * which points to the version string
-+ * Returns: Version number and version string (by reference)
-+ */
-+char MCD_versionString[] = "Multi-channel DMA API v1.0";
-+#define MCD_REV_MAJOR 0x01
-+#define MCD_REV_MINOR 0x00
-+
-+int MCD_getVersion(char **longVersion)
-+{
-+ int ret = 0;
-+ *longVersion = MCD_versionString;
-+ ret = (MCD_REV_MAJOR << 8) | MCD_REV_MINOR;
-+ return ret;
-+}
-+/********************** End of MCD_getVersion() *********************/
-+
-+/********************************************************************/
-+/* Private version of memcpy()
-+ * Note that everything this is used for is longword-aligned.
-+ */
-+static void MCD_memcpy(int *dest, int *src, u32 size)
-+{
-+ u32 i;
-+
-+ for (i = 0; i < size; i += sizeof(int), dest++, src++)
-+ *dest = *src;
-+}
-+/********************************************************************/
---- /dev/null
-+++ b/drivers/dma/MCD_progCheck.h
-@@ -0,0 +1,29 @@
-+/*
-+ * drivers/dma/MCD_progCheck.h
-+ *
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/* This file is autogenerated. Do not change */
-+
-+#define CURRBD 4
-+#define DCOUNT 6
-+#define DESTPTR 5
-+#define SRCPTR 7
---- /dev/null
-+++ b/drivers/dma/MCD_tasks.c
-@@ -0,0 +1,2457 @@
-+/*
-+ * drivers/dma/MCD_tasks.c
-+ *
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include "MCD_dma.h"
-+
-+u32 MCD_varTab0[];
-+u32 MCD_varTab1[];
-+u32 MCD_varTab2[];
-+u32 MCD_varTab3[];
-+u32 MCD_varTab4[];
-+u32 MCD_varTab5[];
-+u32 MCD_varTab6[];
-+u32 MCD_varTab7[];
-+u32 MCD_varTab8[];
-+u32 MCD_varTab9[];
-+u32 MCD_varTab10[];
-+u32 MCD_varTab11[];
-+u32 MCD_varTab12[];
-+u32 MCD_varTab13[];
-+u32 MCD_varTab14[];
-+u32 MCD_varTab15[];
-+
-+u32 MCD_funcDescTab0[];
-+#ifdef MCD_INCLUDE_EU
-+u32 MCD_funcDescTab1[];
-+u32 MCD_funcDescTab2[];
-+u32 MCD_funcDescTab3[];
-+u32 MCD_funcDescTab4[];
-+u32 MCD_funcDescTab5[];
-+u32 MCD_funcDescTab6[];
-+u32 MCD_funcDescTab7[];
-+u32 MCD_funcDescTab8[];
-+u32 MCD_funcDescTab9[];
-+u32 MCD_funcDescTab10[];
-+u32 MCD_funcDescTab11[];
-+u32 MCD_funcDescTab12[];
-+u32 MCD_funcDescTab13[];
-+u32 MCD_funcDescTab14[];
-+u32 MCD_funcDescTab15[];
-+#endif
-+
-+u32 MCD_contextSave0[];
-+u32 MCD_contextSave1[];
-+u32 MCD_contextSave2[];
-+u32 MCD_contextSave3[];
-+u32 MCD_contextSave4[];
-+u32 MCD_contextSave5[];
-+u32 MCD_contextSave6[];
-+u32 MCD_contextSave7[];
-+u32 MCD_contextSave8[];
-+u32 MCD_contextSave9[];
-+u32 MCD_contextSave10[];
-+u32 MCD_contextSave11[];
-+u32 MCD_contextSave12[];
-+u32 MCD_contextSave13[];
-+u32 MCD_contextSave14[];
-+u32 MCD_contextSave15[];
-+
-+u32 MCD_realTaskTableSrc[] = {
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab0, /* Task 0 Variable Table */
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave0, /* Task 0 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab1, /* Task 1 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab1, /* Task 1 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave1, /* Task 1 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab2, /* Task 2 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab2, /* Task 2 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave2, /* Task 2 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab3, /* Task 3 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab3, /* Task 3 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave3, /* Task 3 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab4, /* Task 4 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab4, /* Task 4 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave4, /* Task 4 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab5, /* Task 5 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab5, /* Task 5 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave5, /* Task 5 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab6, /* Task 6 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab6, /* Task 6 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave6, /* Task 6 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab7, /* Task 7 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab7, /* Task 7 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave7, /* Task 7 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab8, /* Task 8 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab8, /* Task 8 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave8, /* Task 8 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab9, /* Task 9 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab9, /* Task 9 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave9, /* Task 9 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab10, /* Task 10 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab10, /* Task 10 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave10, /* Task 10 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab11, /* Task 11 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab11, /* Task 11 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave11, /* Task 11 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab12, /* Task 12 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab12, /* Task 12 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave12, /* Task 12 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab13, /* Task 13 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab13, /* Task 13 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave13, /* Task 13 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab14, /* Task 14 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab14, /* Task 14 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave14, /* Task 14 context save space */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_varTab15, /* Task 15 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_funcDescTab15, /* Task 15 Function Descriptor Table & Flags */
-+#else
-+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_contextSave15, /* Task 15 context save space */
-+ 0x00000000,
-+};
-+
-+
-+u32 MCD_varTab0[] = {
-+/* Task 0 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+
-+u32 MCD_varTab1[] = {
-+/* Task 1 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab2[] = {
-+/* Task 2 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab3[] = {
-+/* Task 3 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab4[] = {
-+/* Task 4 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab5[] = {
-+/* Task 5 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab6[] = {
-+/* Task 6 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab7[] = {
-+/* Task 7 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab8[] = {
-+/* Task 8 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab9[] = {
-+/* Task 9 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab10[] = {
-+/* Task 10 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab11[] = {
-+/* Task 11 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab12[] = {
-+/* Task 12 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab13[] = {
-+/* Task 13 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab14[] = {
-+/* Task 14 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab15[] = {
-+/* Task 15 Variable Table */
-+ 0x00000000, /* var[0] */
-+ 0x00000000, /* var[1] */
-+ 0x00000000, /* var[2] */
-+ 0x00000000, /* var[3] */
-+ 0x00000000, /* var[4] */
-+ 0x00000000, /* var[5] */
-+ 0x00000000, /* var[6] */
-+ 0x00000000, /* var[7] */
-+ 0x00000000, /* var[8] */
-+ 0x00000000, /* var[9] */
-+ 0x00000000, /* var[10] */
-+ 0x00000000, /* var[11] */
-+ 0x00000000, /* var[12] */
-+ 0x00000000, /* var[13] */
-+ 0x00000000, /* var[14] */
-+ 0x00000000, /* var[15] */
-+ 0x00000000, /* var[16] */
-+ 0x00000000, /* var[17] */
-+ 0x00000000, /* var[18] */
-+ 0x00000000, /* var[19] */
-+ 0x00000000, /* var[20] */
-+ 0x00000000, /* var[21] */
-+ 0x00000000, /* var[22] */
-+ 0x00000000, /* var[23] */
-+ 0xe0000000, /* inc[0] */
-+ 0x20000000, /* inc[1] */
-+ 0x2000ffff, /* inc[2] */
-+ 0x00000000, /* inc[3] */
-+ 0x00000000, /* inc[4] */
-+ 0x00000000, /* inc[5] */
-+ 0x00000000, /* inc[6] */
-+ 0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_funcDescTab0[] = {
-+/* Task 0 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+#ifdef MCD_INCLUDE_EU
-+u32 MCD_funcDescTab1[] = {
-+/* Task 1 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab2[] = {
-+/* Task 2 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab3[] = {
-+/* Task 3 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab4[] = {
-+/* Task 4 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab5[] = {
-+/* Task 5 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab6[] = {
-+/* Task 6 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab7[] = {
-+/* Task 7 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab8[] = {
-+/* Task 8 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab9[] = {
-+/* Task 9 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab10[] = {
-+/* Task 10 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab11[] = {
-+/* Task 11 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab12[] = {
-+/* Task 12 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab13[] = {
-+/* Task 13 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab14[] = {
-+/* Task 14 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab15[] = { /* Task 15 Function Descriptor Table */
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0xa0045670, /* mainFunc(), EU# 3 */
-+ 0xa0000000, /* rsduFunc(), EU# 3 */
-+ 0xa0000000, /* crcAccumVal(), EU# 3 */
-+ 0x20000000, /* setCrcAccum(), EU# 3 */
-+ 0x21800000, /* and(), EU# 3 */
-+ 0x21e00000, /* or(), EU# 3 */
-+ 0x20400000, /* add(), EU# 3 */
-+ 0x20500000, /* sub(), EU# 3 */
-+ 0x205a0000, /* andNot(), EU# 3 */
-+ 0x20a00000, /* shiftR(), EU# 3 */
-+ 0x202fa000, /* andReadyBit(), EU# 3 */
-+ 0x202f9000, /* andNotReadyBit(), EU# 3 */
-+ 0x202ea000, /* andWrapBit(), EU# 3 */
-+ 0x202da000, /* andLastBit(), EU# 3 */
-+ 0x202e2000, /* andInterruptBit(), EU# 3 */
-+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+#endif /*MCD_INCLUDE_EU*/
-+
-+u32 MCD_contextSave0[128]; /* Task 0 context save space */
-+u32 MCD_contextSave1[128]; /* Task 1 context save space */
-+u32 MCD_contextSave2[128]; /* Task 2 context save space */
-+u32 MCD_contextSave3[128]; /* Task 3 context save space */
-+u32 MCD_contextSave4[128]; /* Task 4 context save space */
-+u32 MCD_contextSave5[128]; /* Task 5 context save space */
-+u32 MCD_contextSave6[128]; /* Task 6 context save space */
-+u32 MCD_contextSave7[128]; /* Task 7 context save space */
-+u32 MCD_contextSave8[128]; /* Task 8 context save space */
-+u32 MCD_contextSave9[128]; /* Task 9 context save space */
-+u32 MCD_contextSave10[128]; /* Task 10 context save space */
-+u32 MCD_contextSave11[128]; /* Task 11 context save space */
-+u32 MCD_contextSave12[128]; /* Task 12 context save space */
-+u32 MCD_contextSave13[128]; /* Task 13 context save space */
-+u32 MCD_contextSave14[128]; /* Task 14 context save space */
-+u32 MCD_contextSave15[128]; /* Task 15 context save space */
-+
-+u32 MCD_ChainNoEu_TDT[];
-+u32 MCD_SingleNoEu_TDT[];
-+#ifdef MCD_INCLUDE_EU
-+u32 MCD_ChainEu_TDT[];
-+u32 MCD_SingleEu_TDT[];
-+#endif
-+u32 MCD_ENetRcv_TDT[];
-+u32 MCD_ENetXmit_TDT[];
-+
-+u32 MCD_modelTaskTableSrc[] = {
-+ (u32)MCD_ChainNoEu_TDT,
-+ (u32)&((u8 *)MCD_ChainNoEu_TDT)[0x0000016c],
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_SingleNoEu_TDT,
-+ (u32)&((u8 *)MCD_SingleNoEu_TDT)[0x000000d4],
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+#ifdef MCD_INCLUDE_EU
-+ (u32)MCD_ChainEu_TDT,
-+ (u32)&((u8 *)MCD_ChainEu_TDT)[0x000001b4],
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_SingleEu_TDT,
-+ (u32)&((u8 *)MCD_SingleEu_TDT)[0x00000124],
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+#endif
-+ (u32)MCD_ENetRcv_TDT,
-+ (u32)&((u8 *)MCD_ENetRcv_TDT)[0x000000a4],
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ (u32)MCD_ENetXmit_TDT,
-+ (u32)&((u8 *)MCD_ENetXmit_TDT)[0x000000d0],
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+};
-+u32 MCD_ChainNoEu_TDT[] = {
-+ 0x80004000,
-+ 0x8118801b,
-+ 0xb8c60018,
-+ 0x10002b10,
-+ 0x7000000d,
-+ 0x018cf89f,
-+ 0x6000000a,
-+ 0x080cf89f,
-+ 0x000001f8,
-+ 0x98180364,
-+ 0x8118801b,
-+ 0xf8c6001a,
-+ 0xb8c6601b,
-+ 0x10002710,
-+ 0x00000f18,
-+ 0xb8c6001d,
-+ 0x10001310,
-+ 0x60000007,
-+ 0x014cf88b,
-+ 0x98c6001c,
-+ 0x00000710,
-+ 0x98c70018,
-+ 0x10001f10,
-+ 0x0000c818,
-+ 0x000001f8, /* 0060(:0): NOP */
-+ 0xc1476018,
-+ 0xc003231d,
-+ 0x811a601b,
-+ 0xc1862102,
-+ 0x849be009,
-+ 0x03fed7b8,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x1000cb20,
-+ 0x70000006,
-+ 0x088cf88f,
-+ 0x1000cb28,
-+ 0x70000006,
-+ 0x088cf88f,
-+ 0x1000cb30,
-+ 0x70000006,
-+ 0x088cf88f,
-+ 0x1000cb38,
-+ 0x0000c728,
-+ 0x000001f8, /* 00B0(:0): NOP */
-+ 0xc1476018,
-+ 0xc003241d,
-+ 0x811a601b,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x0000d3a0,
-+ 0xc1862102,
-+ 0x849be009,
-+ 0x0bfed7b8,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x1000cb20,
-+ 0x70000006,
-+ 0x088cf88f,
-+ 0x1000cb28,
-+ 0x70000006,
-+ 0x088cf88f,
-+ 0x1000cb30,
-+ 0x70000006,
-+ 0x088cf88f,
-+ 0x1000cb38,
-+ 0x0000c728,
-+ 0x000001f8, /* 010C(:0): NOP */
-+ 0x8118801b,
-+ 0xd8c60018,
-+ 0x98c6601c,
-+ 0x6000000b,
-+ 0x0c8cfc9f,
-+ 0x000001f8, /* 0124(:0): NOP */
-+ 0xa146001e,
-+ 0x10000b08,
-+ 0x10002050,
-+ 0xb8c60018,
-+ 0x10002b10,
-+ 0x7000000a,
-+ 0x080cf89f,
-+ 0x6000000d,
-+ 0x018cf89f,
-+ 0x000001f8, /* 014C(:0): NOP */
-+ 0x8618801b,
-+ 0x7000000e,
-+ 0x084cf21f,
-+ 0xd8990336,
-+ 0x8019801b,
-+ 0x040001f8,
-+ 0x000001f8, /* 0168(:0): NOP */
-+ 0x000001f8, /* 016C(:0): NOP */
-+};
-+u32 MCD_SingleNoEu_TDT[] = {
-+ 0x8198001b,
-+ 0x7000000d,
-+ 0x080cf81f,
-+ 0x8198801b,
-+ 0x6000000e,
-+ 0x084cf85f,
-+ 0x000001f8, /* 0018(:0): NOP */
-+ 0x8298001b,
-+ 0x7000000d,
-+ 0x010cf81f,
-+ 0x6000000e,
-+ 0x018cf81f,
-+ 0xc202601b,
-+ 0xc002221c,
-+ 0x809a601b,
-+ 0xc10420c2,
-+ 0x839be009,
-+ 0x03fed7b8,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x70000006,
-+ 0x088cf889,
-+ 0x1000cb28,
-+ 0x70000006,
-+ 0x088cf889,
-+ 0x1000cb30,
-+ 0x70000006,
-+ 0x088cf889,
-+ 0x0000cb38,
-+ 0x000001f8, /* 0074(:0): NOP */
-+ 0xc202601b,
-+ 0xc002229c,
-+ 0x809a601b,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x0000d3a0,
-+ 0xc10420c2,
-+ 0x839be009,
-+ 0x0bfed7b8,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x70000006,
-+ 0x088cf889,
-+ 0x1000cb28,
-+ 0x70000006,
-+ 0x088cf889,
-+ 0x1000cb30,
-+ 0x70000006,
-+ 0x088cf889,
-+ 0x0000cb38,
-+ 0x000001f8, /* 00C8(:0): NOP */
-+ 0xc318022d,
-+ 0x8018801b,
-+ 0x040001f8,
-+};
-+#ifdef MCD_INCLUDE_EU
-+u32 MCD_ChainEu_TDT[] = {
-+ 0x80004000,
-+ 0x8198801b,
-+ 0xb8c68018,
-+ 0x10002f10,
-+ 0x7000000d,
-+ 0x01ccf89f,
-+ 0x6000000a,
-+ 0x080cf89f,
-+ 0x000001f8,
-+ 0x981803a4,
-+ 0x8198801b,
-+ 0xf8c6801a,
-+ 0xb8c6e01b,
-+ 0x10002b10,
-+ 0x00001318,
-+ 0xb8c6801d,
-+ 0x10001710,
-+ 0x60000007,
-+ 0x018cf88c,
-+ 0x98c6801c,
-+ 0x00000b10,
-+ 0x98c78018,
-+ 0x10002310,
-+ 0x0000c820,
-+ 0x000001f8, /* 0060(:0): NOP */
-+ 0x8698801b,
-+ 0x7000000f,
-+ 0x084cf2df,
-+ 0xd899042d,
-+ 0x8019801b,
-+ 0x60000003,
-+ 0x2cd7c7df, /* 007C(:979): DRD2B2: EU3(var13) */
-+ 0xd8990364,
-+ 0x8019801b,
-+ 0x60000003,
-+ 0x2c17c7df, /* 008C(:981): DRD2B2: EU3(var1) */
-+ 0x000001f8, /* 0090(:0): NOP */
-+ 0xc1c7e018,
-+ 0xc003a35e,
-+ 0x819a601b,
-+ 0xc206a142,
-+ 0x851be009,
-+ 0x63fe0000,
-+ 0x0d4cfddf,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x70000002,
-+ 0x004cf81f,
-+ 0x1000cb20,
-+ 0x70000006,
-+ 0x088cf891,
-+ 0x1000cb28,
-+ 0x70000006,
-+ 0x088cf891,
-+ 0x1000cb30,
-+ 0x70000006,
-+ 0x088cf891,
-+ 0x1000cb38,
-+ 0x0000c728,
-+ 0x000001f8, /* 00EC(:0): NOP */
-+ 0xc1c7e018,
-+ 0xc003a49e,
-+ 0x819a601b,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x0000d3a0,
-+ 0xc206a142,
-+ 0x851be009,
-+ 0x6bfe0000,
-+ 0x0d4cfddf,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x70000002,
-+ 0x004cf81f,
-+ 0x1000cb20,
-+ 0x70000006,
-+ 0x088cf891,
-+ 0x1000cb28,
-+ 0x70000006,
-+ 0x088cf891,
-+ 0x1000cb30,
-+ 0x70000006,
-+ 0x088cf891,
-+ 0x1000cb38,
-+ 0x0000c728,
-+ 0x000001f8, /* 0154(:0): NOP */
-+ 0x8198801b,
-+ 0xd8c68018,
-+ 0x98c6e01c,
-+ 0x6000000b,
-+ 0x0c8cfc9f,
-+ 0x0000cc08,
-+ 0xa1c6801e,
-+ 0x10000f08,
-+ 0x10002458,
-+ 0xb8c68018,
-+ 0x10002f10,
-+ 0x7000000a,
-+ 0x080cf89f,
-+ 0x6000000d,
-+ 0x01ccf89f,
-+ 0x000001f8, /* 0194(:0): NOP */
-+ 0x8698801b,
-+ 0x7000000e,
-+ 0x084cf25f,
-+ 0xd899037f,
-+ 0x8019801b,
-+ 0x040001f8,
-+ 0x000001f8, /* 01B0(:0): NOP */
-+ 0x000001f8, /* 01B4(:0): NOP */
-+};
-+u32 MCD_SingleEu_TDT[] = {
-+ 0x8218001b,
-+ 0x7000000d,
-+ 0x080cf81f,
-+ 0x8218801b,
-+ 0x6000000e,
-+ 0x084cf85f,
-+ 0x000001f8, /* 0018(:0): NOP */
-+ 0x8318001b,
-+ 0x7000000d,
-+ 0x014cf81f,
-+ 0x6000000e,
-+ 0x01ccf81f,
-+ 0x8498001b,
-+ 0x7000000f,
-+ 0x080cf19f,
-+ 0xd81882a4,
-+ 0x8019001b,
-+ 0x60000003,
-+ 0x2c97c7df,
-+ 0xd818826d,
-+ 0x8019001b,
-+ 0x60000003,
-+ 0x2c17c7df,
-+ 0x000001f8, /* 005C(:0): NOP */
-+ 0xc282e01b,
-+ 0xc002a25e,
-+ 0x811a601b,
-+ 0xc184a102,
-+ 0x841be009,
-+ 0x63fe0000,
-+ 0x0d4cfddf,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x70000002,
-+ 0x004cf99f,
-+ 0x70000006,
-+ 0x088cf88b,
-+ 0x1000cb28,
-+ 0x70000006,
-+ 0x088cf88b,
-+ 0x1000cb30,
-+ 0x70000006,
-+ 0x088cf88b,
-+ 0x0000cb38,
-+ 0x000001f8, /* 00B0(:0): NOP */
-+ 0xc282e01b,
-+ 0xc002a31e,
-+ 0x811a601b,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x0000d3a0,
-+ 0xc184a102,
-+ 0x841be009,
-+ 0x6bfe0000,
-+ 0x0d4cfddf,
-+ 0xda9b001b,
-+ 0x9b9be01b,
-+ 0x70000002,
-+ 0x004cf99f,
-+ 0x70000006,
-+ 0x088cf88b,
-+ 0x1000cb28,
-+ 0x70000006,
-+ 0x088cf88b,
-+ 0x1000cb30,
-+ 0x70000006,
-+ 0x088cf88b,
-+ 0x0000cb38,
-+ 0x000001f8, /* 0110(:0): NOP */
-+ 0x8144801c,
-+ 0x0000c008,
-+ 0xc398027f,
-+ 0x8018801b,
-+ 0x040001f8,
-+};
-+#endif
-+u32 MCD_ENetRcv_TDT[] = {
-+ 0x80004000,
-+ 0x81988000,
-+ 0x10000788,
-+ 0x6000000a,
-+ 0x080cf05f,
-+ 0x98180209,
-+ 0x81c40004,
-+ 0x7000000e,
-+ 0x010cf05f,
-+ 0x7000000c,
-+ 0x01ccf05f,
-+ 0x70000004,
-+ 0x014cf049,
-+ 0x70000004,
-+ 0x004cf04a,
-+ 0x00000b88,
-+ 0xc4030150,
-+ 0x8119e012,
-+ 0x03e0cf90,
-+ 0x81188000,
-+ 0x000ac788,
-+ 0xc4030000,
-+ 0x8199e000,
-+ 0x63e00004,
-+ 0x084cfc8b,
-+ 0xd8990000,
-+ 0x9999e000,
-+ 0x60000005,
-+ 0x0cccf841,
-+ 0x81c60000,
-+ 0xc399021b,
-+ 0x80198000,
-+ 0x00008400,
-+ 0x00000f08,
-+ 0x81988000,
-+ 0x10000788,
-+ 0x6000000a,
-+ 0x080cf05f,
-+ 0xc2188209,
-+ 0x80190000,
-+ 0x040001f8,
-+ 0x000001f8,
-+};
-+u32 MCD_ENetXmit_TDT[] = {
-+ 0x80004000,
-+ 0x81988000,
-+ 0x10000788,
-+ 0x6000000a,
-+ 0x080cf05f,
-+ 0x98180309,
-+ 0x80004003,
-+ 0x81c60004,
-+ 0x7000000e,
-+ 0x014cf05f,
-+ 0x7000000c,
-+ 0x028cf05f,
-+ 0x7000000d,
-+ 0x018cf05f,
-+ 0x70000004,
-+ 0x01ccf04d,
-+ 0x10000b90,
-+ 0x60000004,
-+ 0x020cf0a1,
-+ 0xc3188312,
-+ 0x83c70000,
-+ 0x00001f10,
-+ 0xc583a3c3,
-+ 0x81042325,
-+ 0x03e0c798,
-+ 0xd8990000,
-+ 0x9999e000,
-+ 0x000acf98,
-+ 0xd8992306,
-+ 0x9999e03f,
-+ 0x03eac798,
-+ 0xd8990000,
-+ 0x9999e000,
-+ 0x000acf98,
-+ 0xd8990000,
-+ 0x99832302,
-+ 0x0beac798,
-+ 0x81988000,
-+ 0x6000000b,
-+ 0x0c4cfc5f,
-+ 0x81c80000,
-+ 0xc5190312,
-+ 0x80198000,
-+ 0x00008400,
-+ 0x00000f08,
-+ 0x81988000,
-+ 0x10000788,
-+ 0x6000000a,
-+ 0x080cf05f,
-+ 0xc2988309,
-+ 0x80190000,
-+ 0x040001f8,
-+ 0x000001f8,
-+};
-+
-+#ifdef MCD_INCLUDE_EU
-+MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
-+#endif
---- /dev/null
-+++ b/drivers/dma/MCD_tasksInit.c
-@@ -0,0 +1,271 @@
-+/*
-+ * drivers/dma/MCD_tasksInit.c
-+ *
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Autogenerated - Do not edit!
-+ */
-+
-+#include "MCD_dma.h"
-+
-+extern dmaRegs *MCD_dmaBar;
-+
-+
-+/*
-+ * Task 0
-+ */
-+
-+void MCD_startDmaChainNoEu(int *currBD, short srcIncr,
-+ short destIncr, int xferSize, short xferSizeIncr,
-+ int *cSave, volatile TaskTableEntry *taskTable,
-+ int channel)
-+{
-+ MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */
-+ MCD_SET_VAR(taskTable+channel, 25,
-+ (u32)(0xe000 << 16) | (0xffff & srcIncr));
-+
-+ /* inc[1] */
-+ MCD_SET_VAR(taskTable+channel, 24,
-+ (u32)(0xe000 << 16) | (0xffff & destIncr));
-+ /* inc[0] */
-+ MCD_SET_VAR(taskTable+channel, 11, (u32)xferSize); /* var[11] */
-+ MCD_SET_VAR(taskTable+channel, 26,
-+ (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));
-+ /* inc[2] */
-+ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */
-+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+ MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000); /* var[3] */
-+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
-+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
-+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */
-+ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000); /* var[12] */
-+ MCD_SET_VAR(taskTable+channel, 13, (u32)0x80000000); /* var[13] */
-+ MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000010); /* var[14] */
-+ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004); /* var[15] */
-+ MCD_SET_VAR(taskTable+channel, 16, (u32)0x08000000); /* var[16] */
-+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */
-+ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000); /* inc[4] */
-+ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001); /* inc[5] */
-+ MCD_SET_VAR(taskTable+channel, 30, (u32)0x40000000); /* inc[6] */
-+
-+ /* Set the task's Enable bit in its Task Control Register */
-+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 1
-+ */
-+
-+void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr,
-+ char *destAddr, short destIncr, int dmaSize,
-+ short xferSizeIncr, int flags, int *currBD, int *cSave,
-+ volatile TaskTableEntry *taskTable, int channel)
-+{
-+ MCD_SET_VAR(taskTable+channel, 7, (u32)srcAddr); /* var[7] */
-+ MCD_SET_VAR(taskTable+channel, 25,
-+ (u32)(0xe000 << 16) | (0xffff & srcIncr));
-+ /* inc[1] */
-+ MCD_SET_VAR(taskTable+channel, 2, (u32)destAddr); /* var[2] */
-+ MCD_SET_VAR(taskTable+channel, 24,
-+ (u32)(0xe000 << 16) | (0xffff & destIncr));
-+ /* inc[0] */
-+ MCD_SET_VAR(taskTable+channel, 3, (u32)dmaSize); /* var[3] */
-+ MCD_SET_VAR(taskTable+channel, 26,
-+ (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));
-+ /* inc[2] */
-+ MCD_SET_VAR(taskTable+channel, 5, (u32)flags); /* var[5] */
-+ MCD_SET_VAR(taskTable+channel, 1, (u32)currBD); /* var[1] */
-+ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */
-+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
-+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000004); /* var[9] */
-+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x08000000); /* var[10] */
-+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */
-+ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001); /* inc[4] */
-+ MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000); /* inc[5] */
-+
-+ /* Set the task's Enable bit in its Task Control Register */
-+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 2
-+ */
-+
-+void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr,
-+ int xferSize, short xferSizeIncr, int *cSave,
-+ volatile TaskTableEntry *taskTable, int channel)
-+{
-+
-+ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
-+ MCD_SET_VAR(taskTable+channel, 25,
-+ (u32)(0xe000 << 16) | (0xffff & srcIncr));
-+ /* inc[1] */
-+ MCD_SET_VAR(taskTable+channel, 24,
-+ (u32)(0xe000 << 16) | (0xffff & destIncr));
-+ /* inc[0] */
-+ MCD_SET_VAR(taskTable+channel, 12, (u32)xferSize);
-+ /* var[12] */
-+ MCD_SET_VAR(taskTable+channel, 26,
-+ (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));
-+ /* inc[2] */
-+ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */
-+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
-+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
-+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
-+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */
-+ MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000); /* var[11] */
-+ MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000); /* var[13] */
-+ MCD_SET_VAR(taskTable+channel, 14, (u32)0x80000000); /* var[14] */
-+ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000010); /* var[15] */
-+ MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000001); /* var[16] */
-+ MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000004); /* var[17] */
-+ MCD_SET_VAR(taskTable+channel, 18, (u32)0x08000000); /* var[18] */
-+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */
-+ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000); /* inc[4] */
-+ MCD_SET_VAR(taskTable+channel, 29, (u32)0xc0000000); /* inc[5] */
-+ MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001); /* inc[6] */
-+ MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000); /* inc[7] */
-+
-+ /* Set the task's Enable bit in its Task Control Register */
-+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 3
-+ */
-+
-+void MCD_startDmaSingleEu(char *srcAddr, short srcIncr,
-+ char *destAddr, short destIncr, int dmaSize,
-+ short xferSizeIncr, int flags, int *currBD, int *cSave,
-+ volatile TaskTableEntry *taskTable, int channel)
-+{
-+ MCD_SET_VAR(taskTable+channel, 8, (u32)srcAddr); /* var[8] */
-+ MCD_SET_VAR(taskTable+channel, 25,
-+ (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */
-+ MCD_SET_VAR(taskTable+channel, 3, (u32)destAddr); /* var[3] */
-+ MCD_SET_VAR(taskTable+channel, 24,
-+ (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */
-+ MCD_SET_VAR(taskTable+channel, 4, (u32)dmaSize); /* var[4] */
-+ MCD_SET_VAR(taskTable+channel, 26,
-+ (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */
-+ MCD_SET_VAR(taskTable+channel, 6, (u32)flags); /* var[6] */
-+ MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */
-+ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */
-+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
-+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000001); /* var[10] */
-+ MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000004); /* var[11] */
-+ MCD_SET_VAR(taskTable+channel, 12, (u32)0x08000000); /* var[12] */
-+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */
-+ MCD_SET_VAR(taskTable+channel, 28, (u32)0xc0000000); /* inc[4] */
-+ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000); /* inc[5] */
-+ MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001); /* inc[6] */
-+ MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000); /* inc[7] */
-+
-+ /* Set the task's Enable bit in its Task Control Register */
-+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 4
-+ */
-+
-+void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr,
-+ volatile TaskTableEntry *taskTable, int channel)
-+{
-+ MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */
-+ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
-+ MCD_SET_VAR(taskTable+channel, 6, (u32)rcvFifoPtr); /* var[6] */
-+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
-+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x0000ffff); /* var[9] */
-+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x30000000); /* var[10] */
-+ MCD_SET_VAR(taskTable+channel, 11, (u32)0x0fffffff); /* var[11] */
-+ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000008); /* var[12] */
-+ MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000); /* inc[0] */
-+ MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000); /* inc[1] */
-+ MCD_SET_VAR(taskTable+channel, 26, (u32)0x20000004); /* inc[2] */
-+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x40000000); /* inc[3] */
-+
-+ /* Set the task's Enable bit in its Task Control Register */
-+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 5
-+ */
-+
-+void MCD_startDmaENetXmit(char *bDBase, char *currBD,
-+ char *xmitFifoPtr, volatile TaskTableEntry *taskTable,
-+ int channel)
-+{
-+ MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */
-+ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
-+ MCD_SET_VAR(taskTable+channel, 11, (u32)xmitFifoPtr); /* var[11] */
-+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
-+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
-+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
-+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */
-+ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000); /* var[12] */
-+ MCD_SET_VAR(taskTable+channel, 13, (u32)0x0000ffff); /* var[13] */
-+ MCD_SET_VAR(taskTable+channel, 14, (u32)0xffffffff); /* var[14] */
-+ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004); /* var[15] */
-+ MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000008); /* var[16] */
-+ MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000); /* inc[0] */
-+ MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000); /* inc[1] */
-+ MCD_SET_VAR(taskTable+channel, 26, (u32)0x40000000); /* inc[2] */
-+ MCD_SET_VAR(taskTable+channel, 27, (u32)0xc000fffc); /* inc[3] */
-+ MCD_SET_VAR(taskTable+channel, 28, (u32)0xe0000004); /* inc[4] */
-+ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000); /* inc[5] */
-+ MCD_SET_VAR(taskTable+channel, 30, (u32)0x4000ffff); /* inc[6] */
-+ MCD_SET_VAR(taskTable+channel, 31, (u32)0xe0000001); /* inc[7] */
-+
-+ /* Set the task's Enable bit in its Task Control Register */
-+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
---- /dev/null
-+++ b/drivers/dma/MCD_tasksInit.h
-@@ -0,0 +1,84 @@
-+/*
-+ * drivers/dma/MCD_tasksInit.h
-+ *
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ * Shrek Wu b16972@freescale.com
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef MCD_TSK_INIT_H
-+#define MCD_TSK_INIT_H 1
-+
-+/*
-+ * Autogenerated - Do not edit!
-+ */
-+
-+/*
-+ * Task 0
-+ */
-+void MCD_startDmaChainNoEu(int *currBD, short srcIncr,
-+ short destIncr, int xferSize,
-+ short xferSizeIncr, int *cSave,
-+ volatile TaskTableEntry *taskTable,
-+ int channel);
-+
-+
-+/*
-+ * Task 1
-+ */
-+void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr,
-+ char *destAddr, short destIncr, int dmaSize,
-+ short xferSizeIncr, int flags, int *currBD,
-+ int *cSave, volatile TaskTableEntry *taskTable,
-+ int channel);
-+
-+
-+/*
-+ * Task 2
-+ */
-+void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr,
-+ int xferSize, short xferSizeIncr, int *cSave,
-+ volatile TaskTableEntry *taskTable,
-+ int channel);
-+
-+
-+/*
-+ * Task 3
-+ */
-+void MCD_startDmaSingleEu(char *srcAddr, short srcIncr,
-+ char *destAddr, short destIncr, int dmaSize,
-+ short xferSizeIncr, int flags, int *currBD,
-+ int *cSave, volatile TaskTableEntry *taskTable,
-+ int channel);
-+
-+
-+/*
-+ * Task 4
-+ */
-+void MCD_startDmaENetRcv(char *bDBase, char *currBD,
-+ char *rcvFifoPtr,
-+ volatile TaskTableEntry *taskTable, int channel);
-+
-+
-+/*
-+ * Task 5
-+ */
-+void MCD_startDmaENetXmit(char *bDBase, char *currBD,
-+ char *xmitFifoPtr,
-+ volatile TaskTableEntry *taskTable, int channel);
-+
-+#endif /* MCD_TSK_INIT_H */
diff --git a/target/linux/coldfire/patches/014-Add-CFV4E-FPU-support-for-MCF547x-MCF548x.patch b/target/linux/coldfire/patches/014-Add-CFV4E-FPU-support-for-MCF547x-MCF548x.patch
deleted file mode 100644
index 17c38a8..0000000
--- a/target/linux/coldfire/patches/014-Add-CFV4E-FPU-support-for-MCF547x-MCF548x.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From f5d90ef1f575d712c9f061dd5e4d48aa34d73bd0 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:43 +0800
-Subject: [PATCH 14/52] Add CFV4E FPU support for MCF547x/MCF548x
-
-Add CFV4E FPU support for MCF547x/MCF548x.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/include/asm/fpu.h | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/arch/m68k/include/asm/fpu.h
-+++ b/arch/m68k/include/asm/fpu.h
-@@ -14,6 +14,8 @@
- #define FPSTATESIZE (28)
- #elif defined(CONFIG_M68060)
- #define FPSTATESIZE (12)
-+#elif defined(CONFIG_CFV4E)
-+#define FPSTATESIZE (16)
- #else
- #define FPSTATESIZE (0)
- #endif
diff --git a/target/linux/coldfire/patches/015-Add-driver-to-support-ten-UART-devices-on-MCF5441x.patch b/target/linux/coldfire/patches/015-Add-driver-to-support-ten-UART-devices-on-MCF5441x.patch
deleted file mode 100644
index 6fa3e59..0000000
--- a/target/linux/coldfire/patches/015-Add-driver-to-support-ten-UART-devices-on-MCF5441x.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From a42f35579c21ffdda461031a5d2d210e27eb506a Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:43 +0800
-Subject: [PATCH 15/52] Add driver to support ten UART devices on MCF5441x
-
-Test CPU board: UART0(J1), UART4(J3)
-Test SER2 board: UART1(J11), UART2(J31)
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/tty/serial/Kconfig | 70 ++++++++++++++++++++++++++++++++++++++++++++
- drivers/tty/serial/mcf.c | 2 +-
- 2 files changed, 71 insertions(+), 1 deletions(-)
-
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -1070,6 +1070,76 @@ config SERIAL_MCF_CONSOLE
- help
- Enable a ColdFire internal serial port to be the system console.
-
-+config SERIAL_MCF_UART0
-+ bool "Coldfire UART0 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default y
-+ help
-+ Enable ColdFire UART0 device configuration
-+
-+config SERIAL_MCF_UART1
-+ bool "Coldfire UART1 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART1 device configuration
-+
-+config SERIAL_MCF_UART2
-+ bool "Coldfire UART2 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART2 device configuration
-+
-+config SERIAL_MCF_UART3
-+ bool "Coldfire UART3 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART3 device configuration
-+
-+config SERIAL_MCF_UART4
-+ bool "Coldfire UART4 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART4 device configuration
-+
-+config SERIAL_MCF_UART5
-+ bool "Coldfire UART5 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART5 device configuration
-+
-+config SERIAL_MCF_UART6
-+ bool "Coldfire UART6 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART6 device configuration
-+
-+config SERIAL_MCF_UART7
-+ bool "Coldfire UART7 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART7 device configuration
-+
-+config SERIAL_MCF_UART8
-+ bool "Coldfire UART8 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART8 device configuration
-+
-+config SERIAL_MCF_UART9
-+ bool "Coldfire UART9 device support"
-+ depends on SERIAL_MCF && M5441X
-+ default n
-+ help
-+ Enable ColdFire UART9 device configuration
-+
- config SERIAL_68360_SMC
- bool "68360 SMC uart support"
- depends on M68360
---- a/drivers/tty/serial/mcf.c
-+++ b/drivers/tty/serial/mcf.c
-@@ -527,7 +527,7 @@ static const struct uart_ops mcf_uart_op
- .verify_port = mcf_verify_port,
- };
-
--static struct mcf_uart mcf_ports[4];
-+static struct mcf_uart mcf_ports[MAX_PORT_NUM];
-
- #define MCF_MAXPORTS ARRAY_SIZE(mcf_ports)
-
diff --git a/target/linux/coldfire/patches/016-Add-nand-driver-support-for-M54418TWR-board.patch b/target/linux/coldfire/patches/016-Add-nand-driver-support-for-M54418TWR-board.patch
deleted file mode 100644
index e495ab8..0000000
--- a/target/linux/coldfire/patches/016-Add-nand-driver-support-for-M54418TWR-board.patch
+++ /dev/null
@@ -1,1381 +0,0 @@
-From 6a5c2427d53c24a30f28b8061b2cda4edad37f58 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:43 +0800
-Subject: [PATCH 16/52] Add nand driver support for M54418TWR board
-
-Disable hw ECC for erase block aligned pages.
-
-On the erase block, there's always have clean marker for jffs2,
-The NFC ECC provide a fake correction on the erase block when
-there're clean marker and adjust the bits on the fly when reading back.
-
-Disable the hw ECC on erase block aligned pages is a workaround
-for jffs2 on the NAND.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/include/asm/fsl_nfc.h | 330 +++++++++++++
- drivers/mtd/nand/Kconfig | 7 +
- drivers/mtd/nand/Makefile | 1 +
- drivers/mtd/nand/fsl_nfc.c | 995 +++++++++++++++++++++++++++++++++++++++
- 4 files changed, 1333 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/include/asm/fsl_nfc.h
- create mode 100644 drivers/mtd/nand/fsl_nfc.c
-
---- /dev/null
-+++ b/arch/m68k/include/asm/fsl_nfc.h
-@@ -0,0 +1,330 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Author: Shaohui Xie <b21989@freescale.com>
-+ *
-+ * Description:
-+ * MPC5125/M54418TWR Nand driver.
-+ *
-+ * This is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef MPC5125_NFC_H
-+#define MPC5125_NFC_H
-+
-+
-+/* NFC PAD Define */
-+#define PAD_NFC_IO PAD_FUNC0
-+#define PAD_NFC_ALE PAD_FUNC0
-+#define PAD_NFC_CLE PAD_FUNC0
-+#define PAD_NFC_WE PAD_FUNC0
-+#define PAD_NFC_RE PAD_FUNC0
-+#define PAD_NFC_CE0 PAD_FUNC0
-+#define PAD_NFC_CE1 PAD_FUNC1
-+#define PAD_NFC_CE2 PAD_FUNC2
-+#define PAD_NFC_CE3 PAD_FUNC2
-+#define PAD_NFC_RB0 PAD_FUNC0
-+#define PAD_NFC_RB1 PAD_FUNC2
-+#define PAD_NFC_RB2 PAD_FUNC2
-+#define PAD_NFC_RB3 PAD_FUNC2
-+
-+/* NFC Control PAD Define */
-+#define BALL_NFC_CE0 IOCTL_NFC_CE0_B
-+#define BALL_NFC_CE1 IOCTL_SDHC1_CLK
-+#define BALL_NFC_CE2 IOCTL_PSC1_4
-+#define BALL_NFC_CE3 IOCTL_J1850_TX
-+#define BALL_NFC_RB0 IOCTL_NFC_RB
-+#define BALL_NFC_RB1 IOCTL_FEC1_TXD_0
-+#define BALL_NFC_RB2 IOCTL_PSC1_3
-+#define BALL_NFC_RB3 IOCTL_J1850_RX
-+#define BALL_NFC_ALE IOCTL_EMB_AD19
-+#define BALL_NFC_CLE IOCTL_EMB_AD18
-+#define BALL_NFC_WE IOCTL_EMB_AD16
-+#define BALL_NFC_RE IOCTL_EMB_AD17
-+
-+/* NFC IO Pad Define */
-+#define BALL_NFC_IO0 IOCTL_EMB_AD00
-+#define BALL_NFC_IO1 IOCTL_EMB_AD01
-+#define BALL_NFC_IO2 IOCTL_EMB_AD02
-+#define BALL_NFC_IO3 IOCTL_EMB_AD03
-+#define BALL_NFC_IO4 IOCTL_EMB_AD04
-+#define BALL_NFC_IO5 IOCTL_EMB_AD05
-+#define BALL_NFC_IO6 IOCTL_EMB_AD06
-+#define BALL_NFC_IO7 IOCTL_EMB_AD07
-+
-+/* Addresses for NFC MAIN RAM BUFFER areas */
-+#define NFC_MAIN_AREA(n) ((n) * 0x1000)
-+
-+/* Addresses for NFC SPARE BUFFER areas */
-+#define NFC_SPARE_BUFFERS 8
-+#define NFC_SPARE_LEN 0x10
-+#define NFC_SPARE_AREA(n) (0x800 + ((n) * NFC_SPARE_LEN))
-+
-+#define PAGE_2K 0x0800
-+#define PAGE_64 0x0040
-+
-+/* MPC5125 NFC registers */
-+/* Typical Flash Commands */
-+#define READ_PAGE_CMD_CODE 0x7EE0
-+#define PROGRAM_PAGE_CMD_CODE 0x7FC0
-+#define ERASE_CMD_CODE 0x4EC0
-+#define READ_ID_CMD_CODE 0x4804
-+#define RESET_CMD_CODE 0x4040
-+#define DMA_PROGRAM_PAGE_CMD_CODE 0xFFC8
-+#define RANDOM_IN_CMD_CODE 0x7140
-+#define RANDOM_OUT_CMD_CODE 0x70E0
-+#define STATUS_READ_CMD_CODE 0x4068
-+
-+#define PAGE_READ_CMD_BYTE1 0x00
-+#define PAGE_READ_CMD_BYTE2 0x30
-+#define PROGRAM_PAGE_CMD_BYTE1 0x80
-+#define PROGRAM_PAGE_CMD_BYTE2 0x10
-+#define READ_STATUS_CMD_BYTE 0x70
-+#define ERASE_CMD_BYTE1 0x60
-+#define ERASE_CMD_BYTE2 0xD0
-+#define READ_ID_CMD_BYTE 0x90
-+#define RESET_CMD_BYTE 0xFF
-+#define RANDOM_OUT_CMD_BYTE1 0x05
-+#define RANDOM_OUT_CMD_BYTE2 0xE0
-+
-+/* NFC ECC mode define */
-+#define ECC_BYPASS 0x0
-+#define ECC_8_BYTE 0x1
-+#define ECC_12_BYTE 0x2
-+#define ECC_15_BYTE 0x3
-+#define ECC_23_BYTE 0x4
-+#define ECC_30_BYTE 0x5
-+#define ECC_45_BYTE 0x6
-+#define ECC_60_BYTE 0x7
-+#define ECC_ERROR 1
-+#define ECC_RIGHT 0
-+
-+/***************** Module-Relative Register Offsets *************************/
-+#define NFC_SRAM_BUFFER 0x0000
-+#define NFC_FLASH_CMD1 0x3F00
-+#define NFC_FLASH_CMD2 0x3F04
-+#define NFC_COL_ADDR 0x3F08
-+#define NFC_ROW_ADDR 0x3F0c
-+#define NFC_FLASH_COMMAND_REPEAT 0x3F10
-+#define NFC_ROW_ADDR_INC 0x3F14
-+#define NFC_FLASH_STATUS1 0x3F18
-+#define NFC_FLASH_STATUS2 0x3F1c
-+#define NFC_DMA1_ADDR 0x3F20
-+#define NFC_DMA2_ADDR 0x3F34
-+#define NFC_DMA_CONFIG 0x3F24
-+#define NFC_CACHE_SWAP 0x3F28
-+#define NFC_SECTOR_SIZE 0x3F2c
-+#define NFC_FLASH_CONFIG 0x3F30
-+#define NFC_IRQ_STATUS 0x3F38
-+
-+/***************** Module-Relative Register Reset Value *********************/
-+#define NFC_SRAM_BUFFER_RSTVAL 0x00000000
-+#define NFC_FLASH_CMD1_RSTVAL 0x30FF0000
-+#define NFC_FLASH_CMD2_RSTVAL 0x007EE000
-+#define NFC_COL_ADDR_RSTVAL 0x00000000
-+#define NFC_ROW_ADDR_RSTVAL 0x11000000
-+#define NFC_FLASH_COMMAND_REPEAT_RSTVAL 0x00000000
-+#define NFC_ROW_ADDR_INC_RSTVAL 0x00000001
-+#define NFC_FLASH_STATUS1_RSTVAL 0x00000000
-+#define NFC_FLASH_STATUS2_RSTVAL 0x00000000
-+#define NFC_DMA1_ADDR_RSTVAL 0x00000000
-+#define NFC_DMA2_ADDR_RSTVAL 0x00000000
-+#define NFC_DMA_CONFIG_RSTVAL 0x00000000
-+#define NFC_CACHE_SWAP_RSTVAL 0x0FFE0FFE
-+#define NFC_SECTOR_SIZE_RSTVAL 0x00000420
-+#define NFC_FLASH_CONFIG_RSTVAL 0x000EA631
-+#define NFC_IRQ_STATUS_RSTVAL 0x04000000
-+
-+/***************** Module-Relative Register Mask *************************/
-+
-+/* NFC_FLASH_CMD1 Field */
-+#define CMD1_MASK 0xFFFF0000
-+#define CMD1_SHIFT 0
-+#define CMD_BYTE2_MASK 0xFF000000
-+#define CMD_BYTE2_SHIFT 24
-+#define CMD_BYTE3_MASK 0x00FF0000
-+#define CMD_BYTE3_SHIFT 16
-+
-+/* NFC_FLASH_CM2 Field */
-+#define CMD2_MASK 0xFFFFFF07
-+#define CMD2_SHIFT 0
-+#define CMD_BYTE1_MASK 0xFF000000
-+#define CMD_BYTE1_SHIFT 24
-+#define CMD_CODE_MASK 0x00FFFF00
-+#define CMD_CODE_SHIFT 8
-+#define BUFNO_MASK 0x00000006
-+#define BUFNO_SHIFT 1
-+#define BUSY_MASK 0x00000001
-+#define BUSY_SHIFT 0
-+#define START_MASK 0x00000001
-+#define START_SHIFT 0
-+
-+/* NFC_COL_ADDR Field */
-+#define COL_ADDR_MASK 0x0000FFFF
-+#define COL_ADDR_SHIFT 0
-+#define COL_ADDR_COL_ADDR2_MASK 0x0000FF00
-+#define COL_ADDR_COL_ADDR2_SHIFT 8
-+#define COL_ADDR_COL_ADDR1_MASK 0x000000FF
-+#define COL_ADDR_COL_ADDR1_SHIFT 0
-+
-+/* NFC_ROW_ADDR Field */
-+#define ROW_ADDR_MASK 0x00FFFFFF
-+#define ROW_ADDR_SHIFT 0
-+#define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000
-+#define ROW_ADDR_CHIP_SEL_RB_SHIFT 28
-+#define ROW_ADDR_CHIP_SEL_MASK 0x0F000000
-+#define ROW_ADDR_CHIP_SEL_SHIFT 24
-+#define ROW_ADDR_ROW_ADDR3_MASK 0x00FF0000
-+#define ROW_ADDR_ROW_ADDR3_SHIFT 16
-+#define ROW_ADDR_ROW_ADDR2_MASK 0x0000FF00
-+#define ROW_ADDR_ROW_ADDR2_SHIFT 8
-+#define ROW_ADDR_ROW_ADDR1_MASK 0x000000FF
-+#define ROW_ADDR_ROW_ADDR1_SHIFT 0
-+
-+/* NFC_FLASH_COMMAND_REPEAT Field */
-+#define COMMAND_REPEAT_MASK 0x0000FFFF
-+#define COMMAND_REPEAT_SHIFT 0
-+#define COMMAND_REPEAT_REPEAT_COUNT_MASK 0x0000FFFF
-+#define COMMAND_REPEAT_REPEAT_COUNT_SHIFT 0
-+
-+/* NFC_ROW_ADDR_INC Field */
-+#define ROW_ADDR_INC_MASK 0x00FFFFFF
-+#define ROW_ADDR_INC_SHIFT 0
-+#define ROW_ADDR_INC_ROW_ADDR3_INC_MASK 0x00FF0000
-+#define ROW_ADDR_INC_ROW_ADDR3_INC_SHIFT 16
-+#define ROW_ADDR_INC_ROW_ADDR2_INC_MASK 0x0000FF00
-+#define ROW_ADDR_INC_ROW_ADDR2_INC_SHIFT 8
-+#define ROW_ADDR_INC_ROW_ADDR1_INC_MASK 0x000000FF
-+#define ROW_ADDR_INC_ROW_ADDR1_INC_SHIFT 0
-+
-+/* NFC_FLASH_STATUS1 Field */
-+#define STATUS1_MASK 0xFFFFFFFF
-+#define STATUS1_SHIFT 0
-+#define STATUS1_ID_BYTE1_MASK 0xFF000000
-+#define STATUS1_ID_BYTE1_SHIFT 24
-+#define STATUS1_ID_BYTE2_MASK 0x00FF0000
-+#define STATUS1_ID_BYTE2_SHIFT 16
-+#define STATUS1_ID_BYTE3_MASK 0x0000FF00
-+#define STATUS1_ID_BYTE3_SHIFT 8
-+#define STATUS1_ID_BYTE4_MASK 0x000000FF
-+#define STATUS1_ID_BYTE4_SHIFT 0
-+
-+/* NFC_FLASH_STATUS2 Field */
-+#define STATUS2_MASK 0xFF0000FF
-+#define STATUS2_SHIFT 0
-+#define STATUS2_ID_BYTE5_MASK 0xFF000000
-+#define STATUS2_ID_BYTE5_SHIFT 24
-+#define STATUS_BYTE1_MASK 0x000000FF
-+#define STATUS2_STATUS_BYTE1_SHIFT 0
-+
-+/* NFC_DMA1_ADDR Field */
-+#define DMA1_ADDR_MASK 0xFFFFFFFF
-+#define DMA1_ADDR_SHIFT 0
-+#define DMA1_ADDR_DMA1_ADDR_MASK 0xFFFFFFFF
-+#define DMA1_ADDR_DMA1_ADDR_SHIFT 0
-+
-+/* DMA2_ADDR Field */
-+#define DMA2_ADDR_MASK 0xFFFFFFFF
-+#define DMA2_ADDR_SHIFT 0
-+#define DMA2_ADDR_DMA2_ADDR_MASK 0xFFFFFFFF
-+#define DMA2_ADDR_DMA2_ADDR_SHIFT 0
-+
-+/* DMA_CONFIG Field */
-+#define DMA_CONFIG_MASK 0xFFFFFFFF
-+#define DMA_CONFIG_SHIFT 0
-+#define DMA_CONFIG_DMA1_CNT_MASK 0xFFF00000
-+#define DMA_CONFIG_DMA1_CNT_SHIFT 20
-+#define DMA_CONFIG_DMA2_CNT_MASK 0x000FE000
-+#define DMA_CONFIG_DMA2_CNT_SHIFT 13
-+#define DMA_CONFIG_DMA2_OFFSET_MASK 0x00001FC0
-+#define DMA_CONFIG_DMA2_OFFSET_SHIFT 2
-+#define DMA_CONFIG_DMA1_ACT_MASK 0x00000002
-+#define DMA_CONFIG_DMA1_ACT_SHIFT 1
-+#define DMA_CONFIG_DMA2_ACT_MASK 0x00000001
-+#define DMA_CONFIG_DMA2_ACT_SHIFT 0
-+
-+/* NFC_CACHE_SWAP Field */
-+#define CACHE_SWAP_MASK 0x0FFE0FFE
-+#define CACHE_SWAP_SHIFT 1
-+#define CACHE_SWAP_CACHE_SWAP_ADDR2_MASK 0x0FFE0000
-+#define CACHE_SWAP_CACHE_SWAP_ADDR2_SHIFT 17
-+#define CACHE_SWAP_CACHE_SWAP_ADDR1_MASK 0x00000FFE
-+#define CACHE_SWAP_CACHE_SWAP_ADDR1_SHIFT 1
-+
-+/* NFC_SECTOR_SIZE Field */
-+#define SECTOR_SIZE_MASK 0x00001FFF
-+#define SECTOR_SIZE_SHIFT 0
-+#define SECTOR_SIZE_SECTOR_SIZE_MASK 0x00001FFF
-+#define SECTOR_SIZE_SECTOR_SIZE_SHIFT 0
-+
-+/* NFC_FLASH_CONFIG Field */
-+#define CONFIG_MASK 0xFFFFFFFF
-+#define CONFIG_SHIFT 0
-+#define CONFIG_STOP_ON_WERR_MASK 0x80000000
-+#define CONFIG_STOP_ON_WERR_SHIFT 31
-+#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000
-+#define CONFIG_ECC_SRAM_ADDR_SHIFT 22
-+#define CONFIG_ECC_SRAM_REQ_MASK 0x00200000
-+#define CONFIG_ECC_SRAM_REQ_SHIFT 21
-+#define CONFIG_DMA_REQ_MASK 0x00100000
-+#define CONFIG_DMA_REQ_SHIFT 20
-+#define CONFIG_ECC_MODE_MASK 0x000E0000
-+#define CONFIG_ECC_MODE_SHIFT 17
-+#define CONFIG_FAST_FLASH_MASK 0x00010000
-+#define CONFIG_FAST_FLASH_SHIFT 16
-+#define CONFIG_ID_COUNT_MASK 0x0000E000
-+#define CONFIG_ID_COUNT_SHIFT 13
-+#define CONFIG_CMD_TIMEOUT_MASK 0x00001F00
-+#define CONFIG_CMD_TIMEOUT_SHIFT 8
-+#define CONFIG_16BIT_MASK 0x00000080
-+#define CONFIG_16BIT_SHIFT 7
-+#define CONFIG_BOOT_MODE_MASK 0x00000040
-+#define CONFIG_BOOT_MODE_SHIFT 6
-+#define CONFIG_ADDR_AUTO_INCR_MASK 0x00000020
-+#define CONFIG_ADDR_AUTO_INCR_SHIFT 5
-+#define CONFIG_BUFNO_AUTO_INCR_MASK 0x00000010
-+#define CONFIG_BUFNO_AUTO_INCR_SHIFT 4
-+#define CONFIG_PAGE_CNT_MASK 0x0000000F
-+#define CONFIG_PAGE_CNT_SHIFT 0
-+
-+/* NFC_IRQ_STATUS Field */
-+#define MASK 0xEFFC003F
-+#define SHIFT 0
-+#define WERR_IRQ_MASK 0x80000000
-+#define WERR_IRQ_SHIFT 31
-+#define CMD_DONE_IRQ_MASK 0x40000000
-+#define CMD_DONE_IRQ_SHIFT 30
-+#define IDLE_IRQ_MASK 0x20000000
-+#define IDLE_IRQ_SHIFT 29
-+#define WERR_STATUS_MASK 0x08000000
-+#define WERR_STATUS_SHIFT 27
-+#define FLASH_CMD_BUSY_MASK 0x04000000
-+#define FLASH_CMD_BUSY_SHIFT 26
-+#define RESIDUE_BUSY_MASK 0x02000000
-+#define RESIDUE_BUSY_SHIFT 25
-+#define ECC_BUSY_MASK 0x01000000
-+#define ECC_BUSY_SHIFT 24
-+#define DMA_BUSY_MASK 0x00800000
-+#define DMA_BUSY_SHIFT 23
-+#define WERR_EN_MASK 0x00400000
-+#define WERR_EN_SHIFT 22
-+#define CMD_DONE_EN_MASK 0x00200000
-+#define CMD_DONE_EN_SHIFT 21
-+#define IDLE_EN_MASK 0x00100000
-+#define IDLE_EN_SHIFT 20
-+#define WERR_CLEAR_MASK 0x00080000
-+#define WERR_CLEAR_SHIFT 19
-+#define CMD_DONE_CLEAR_MASK 0x00040000
-+#define CMD_DONE_CLEAR_SHIFT 18
-+#define IDLE_CLEAR_MASK 0x00020000
-+#define IDLE_CLEAR_SHIFT 17
-+#define RESIDUE_BUFF_NO_MASK 0x00000030
-+#define RESIDUE_BUFF_NO_SHIFT 4
-+#define ECC_BUFF_NO_MASK 0x000000C0
-+#define ECC_BUFF_NO_SHIFT 2
-+#define DMA_BUFF_NO_MASK 0x00000003
-+
-+#endif /* MPC5125_NFC_H */
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -474,6 +474,13 @@ config MTD_NAND_MPC5121_NFC
- This enables the driver for the NAND flash controller on the
- MPC5121 SoC.
-
-+config MTD_NAND_FSL_NFC
-+ tristate "Support for NAND on Freescale ColdFire NFC"
-+ depends on MTD_NAND && M5441X
-+ help
-+ Enables support for NAND Flash chips wired onto Freescale PowerPC
-+ processor localbus with User-Programmable Machine support.
-+
- config MTD_NAND_MXC
- tristate "MXC NAND support"
- depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -38,6 +38,7 @@ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
- obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o
-+obj-$(CONFIG_MTD_NAND_FSL_NFC) += fsl_nfc.o
- obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
- obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
- obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/fsl_nfc.c
-@@ -0,0 +1,995 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Author: Shaohui Xie <b21989@freescale.com>
-+ * Jason Jin <Jason.jin@freescale.com>
-+ *
-+ * Description:
-+ * MPC5125 Nand driver.
-+ * Jason ported to M54418TWR.
-+ *
-+ * Based on original driver mpc5121_nfc.c.
-+ *
-+ * This is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <asm/fsl_nfc.h>
-+#include <asm/mcfsim.h>
-+
-+#define DRV_NAME "fsl_nfc"
-+#define DRV_VERSION "0.5"
-+
-+/* Timeouts */
-+#define NFC_RESET_TIMEOUT 1000 /* 1 ms */
-+#define NFC_TIMEOUT (HZ)
-+
-+
-+#define ECC_SRAM_ADDR (0x840 >> 3)
-+#define ECC_STATUS_MASK 0x80
-+#define ECC_ERR_COUNT 0x3F
-+
-+#define MIN(x, y) ((x < y) ? x : y)
-+
-+#ifdef CONFIG_MTD_NAND_FSL_NFC_SWECC
-+static int hardware_ecc;
-+#else
-+static int hardware_ecc = 1;
-+#endif
-+
-+
-+struct fsl_nfc_prv {
-+ struct mtd_info mtd;
-+ struct nand_chip chip;
-+ int irq;
-+ void __iomem *regs;
-+ struct clk *clk;
-+ wait_queue_head_t irq_waitq;
-+ uint column;
-+ int spareonly;
-+ int page;
-+};
-+
-+static int get_status;
-+static int get_id;
-+
-+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
-+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
-+
-+static struct nand_bbt_descr bbt_main_descr = {
-+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
-+ NAND_BBT_2BIT | NAND_BBT_VERSION,
-+ .offs = 11,
-+ .len = 4,
-+ .veroffs = 15,
-+ .maxblocks = 4,
-+ .pattern = bbt_pattern,
-+};
-+
-+static struct nand_bbt_descr bbt_mirror_descr = {
-+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
-+ NAND_BBT_2BIT | NAND_BBT_VERSION,
-+ .offs = 11,
-+ .len = 4,
-+ .veroffs = 15,
-+ .maxblocks = 4,
-+ .pattern = mirror_pattern,
-+};
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *fsl_nfc_pprobes[] = { "cmdlinepart", NULL };
-+#endif
-+#if 0
-+static struct nand_ecclayout nand_hw_eccoob_512 = {
-+ .eccbytes = 8,
-+ .eccpos = {
-+ 8, 9, 10, 11, 12, 13, 14, 15,
-+ },
-+ .oobfree = {
-+ {0, 5} /* byte 5 is factory bad block marker */
-+ },
-+};
-+#endif
-+
-+static struct nand_ecclayout fsl_nfc_ecc45 = {
-+ .eccbytes = 45,
-+ .eccpos = {19, 20, 21, 22, 23,
-+ 24, 25, 26, 27, 28, 29, 30, 31,
-+ 32, 33, 34, 35, 36, 37, 38, 39,
-+ 40, 41, 42, 43, 44, 45, 46, 47,
-+ 48, 49, 50, 51, 52, 53, 54, 55,
-+ 56, 57, 58, 59, 60, 61, 62, 63},
-+ .oobfree = {
-+ {.offset = 8,
-+ .length = 11} }
-+};
-+
-+
-+#if 0
-+static struct nand_ecclayout nand_hw_eccoob_2k = {
-+ .eccbytes = 32,
-+ .eccpos = {
-+ /* 8 bytes of ecc for each 512 bytes of data */
-+ 8, 9, 10, 11, 12, 13, 14, 15,
-+ 24, 25, 26, 27, 28, 29, 30, 31,
-+ 40, 41, 42, 43, 44, 45, 46, 47,
-+ 56, 57, 58, 59, 60, 61, 62, 63,
-+ },
-+ .oobfree = {
-+ {2, 5}, /* bytes 0 and 1 are factory bad block markers */
-+ {16, 7},
-+ {32, 7},
-+ {48, 7},
-+ },
-+};
-+
-+
-+/* ecc struct for nand 5125 */
-+static struct nand_ecclayout nand5125_hw_eccoob_2k = {
-+ .eccbytes = 60,
-+ .eccpos = {
-+ /* 60 bytes of ecc for one page bytes of data */
-+ 4, 5,
-+ 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
-+ 26, 27, 28, 29, 30, 31, 32, 33, 34, 35,
-+ 36, 37, 38, 39, 40, 41, 42, 43, 44, 45,
-+ 46, 47, 48, 49, 50, 51, 52, 53, 54, 55,
-+ 56, 57, 58, 59, 60, 61, 62, 63,
-+ },
-+ .oobfree = {
-+ {2, 2}, /* bytes 0 and 1 are factory bad block markers */
-+ },
-+};
-+#endif
-+
-+static inline u32 nfc_read(struct mtd_info *mtd, uint reg)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+
-+ return in_be32(prv->regs + reg);
-+}
-+
-+/* Write NFC register */
-+static inline void nfc_write(struct mtd_info *mtd, uint reg, u32 val)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+
-+ out_be32(prv->regs + reg, val);
-+}
-+
-+/* Set bits in NFC register */
-+static inline void nfc_set(struct mtd_info *mtd, uint reg, u32 bits)
-+{
-+ nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
-+}
-+
-+/* Clear bits in NFC register */
-+static inline void nfc_clear(struct mtd_info *mtd, uint reg, u32 bits)
-+{
-+ nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
-+}
-+
-+static inline void
-+nfc_set_field(struct mtd_info *mtd, u32 reg, u32 mask, u32 shift, u32 val)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+
-+ out_be32(prv->regs + reg,
-+ (in_be32(prv->regs + reg) & (~mask))
-+ | val << shift);
-+}
-+
-+static inline int
-+nfc_get_field(struct mtd_info *mtd, u32 reg, u32 field_mask)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+
-+ return in_be32(prv->regs + reg) & field_mask;
-+}
-+
-+static inline u8 nfc_check_status(struct mtd_info *mtd)
-+{
-+ u8 fls_status = 0;
-+ fls_status = nfc_get_field(mtd, NFC_FLASH_STATUS2, STATUS_BYTE1_MASK);
-+ return fls_status;
-+}
-+
-+/* clear cmd_done and cmd_idle falg for the coming command */
-+static void fsl_nfc_clear(struct mtd_info *mtd)
-+{
-+ nfc_write(mtd, NFC_IRQ_STATUS, 1 << CMD_DONE_CLEAR_SHIFT);
-+ nfc_write(mtd, NFC_IRQ_STATUS, 1 << IDLE_CLEAR_SHIFT);
-+}
-+
-+/* Wait for operation complete */
-+static void fsl_nfc_done(struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+ int rv;
-+
-+ nfc_set(mtd, NFC_IRQ_STATUS, IDLE_EN_MASK);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CMD2, START_MASK,
-+ START_SHIFT, 1);
-+
-+ if (!nfc_get_field(mtd, NFC_IRQ_STATUS, IDLE_IRQ_MASK)) {
-+ rv = wait_event_timeout(prv->irq_waitq,
-+ nfc_get_field(mtd, NFC_IRQ_STATUS,
-+ IDLE_IRQ_MASK), NFC_TIMEOUT);
-+ if (!rv)
-+ printk(KERN_DEBUG DRV_NAME
-+ ": Timeout while waiting for BUSY.\n");
-+ }
-+ fsl_nfc_clear(mtd);
-+}
-+
-+static inline u8 fsl_nfc_get_id(struct mtd_info *mtd, int col)
-+{
-+ u32 flash_id1 = 0;
-+ u8 *pid;
-+
-+ flash_id1 = nfc_read(mtd, NFC_FLASH_STATUS1);
-+ pid = (u8 *)&flash_id1;
-+
-+ return *(pid + col);
-+}
-+
-+static inline u8 fsl_nfc_get_status(struct mtd_info *mtd)
-+{
-+ u32 flash_status = 0;
-+ u8 *pstatus;
-+
-+ flash_status = nfc_read(mtd, NFC_FLASH_STATUS2);
-+ pstatus = (u8 *)&flash_status;
-+
-+ return *(pstatus + 3);
-+}
-+
-+/* Invoke command cycle */
-+static inline void
-+fsl_nfc_send_cmd(struct mtd_info *mtd, u32 cmd_byte1,
-+ u32 cmd_byte2, u32 cmd_code)
-+{
-+ fsl_nfc_clear(mtd);
-+ nfc_set_field(mtd, NFC_FLASH_CMD2, CMD_BYTE1_MASK,
-+ CMD_BYTE1_SHIFT, cmd_byte1);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CMD1, CMD_BYTE2_MASK,
-+ CMD_BYTE2_SHIFT, cmd_byte2);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CMD2, BUFNO_MASK,
-+ BUFNO_SHIFT, 0);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CMD2, CMD_CODE_MASK,
-+ CMD_CODE_SHIFT, cmd_code);
-+
-+ if (cmd_code == RANDOM_OUT_CMD_CODE)
-+ nfc_set_field(mtd, NFC_FLASH_CMD2, BUFNO_MASK,
-+ BUFNO_SHIFT, 1);
-+}
-+
-+/* Receive ID and status from NAND flash */
-+static inline void
-+fsl_nfc_send_one_byte(struct mtd_info *mtd, u32 cmd_byte1, u32 cmd_code)
-+{
-+ fsl_nfc_clear(mtd);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CMD2, CMD_BYTE1_MASK,
-+ CMD_BYTE1_SHIFT, cmd_byte1);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CMD2, BUFNO_MASK,
-+ BUFNO_SHIFT, 0);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CMD2, CMD_CODE_MASK,
-+ CMD_CODE_SHIFT, cmd_code);
-+}
-+
-+/* NFC interrupt handler */
-+static irqreturn_t
-+fsl_nfc_irq(int irq, void *data)
-+{
-+ struct mtd_info *mtd = data;
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+
-+ nfc_clear(mtd, NFC_IRQ_STATUS, IDLE_EN_MASK);
-+ wake_up(&prv->irq_waitq);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/* Do address cycle(s) */
-+static void
-+fsl_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
-+{
-+
-+ if (column != -1) {
-+ nfc_set_field(mtd, NFC_COL_ADDR,
-+ COL_ADDR_MASK,
-+ COL_ADDR_SHIFT, column);
-+ }
-+
-+ if (page != -1) {
-+ nfc_set_field(mtd, NFC_ROW_ADDR,
-+ ROW_ADDR_MASK,
-+ ROW_ADDR_SHIFT, page);
-+ }
-+
-+ /* DMA Disable */
-+ nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_MASK);
-+
-+ /* PAGE_CNT = 1 */
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
-+ CONFIG_PAGE_CNT_SHIFT, 0x1);
-+}
-+
-+/* Control chips select signal on m54418twr board */
-+static void
-+m54418twr_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ if (chip < 0) {
-+ MCF_GPIO_PAR_FBCTL &= (MCF_GPIO_PAR_FBCTL_ALE_MASK &
-+ MCF_GPIO_PAR_FBCTL_TA_MASK);
-+ MCF_GPIO_PAR_FBCTL |= MCF_GPIO_PAR_FBCTL_ALE_FB_TS |
-+ MCF_GPIO_PAR_FBCTL_TA_TA;
-+
-+ MCF_GPIO_PAR_BE =
-+ MCF_GPIO_PAR_BE_BE3_BE3 | MCF_GPIO_PAR_BE_BE2_BE2 |
-+ MCF_GPIO_PAR_BE_BE1_BE1 | MCF_GPIO_PAR_BE_BE0_BE0;
-+
-+ MCF_GPIO_PAR_CS &= ~MCF_GPIO_PAR_CS_CS1_NFC_CE;
-+ MCF_GPIO_PAR_CS |= MCF_GPIO_PAR_CS_CS0_CS0;
-+ return;
-+ }
-+
-+ MCF_GPIO_PAR_FBCTL &= (MCF_GPIO_PAR_FBCTL_ALE_MASK &
-+ MCF_GPIO_PAR_FBCTL_TA_MASK);
-+ MCF_GPIO_PAR_FBCTL |= MCF_GPIO_PAR_FBCTL_ALE_FB_ALE |
-+ MCF_GPIO_PAR_FBCTL_TA_NFC_RB;
-+ MCF_GPIO_PAR_BE = MCF_GPIO_PAR_BE_BE3_FB_A1 |
-+ MCF_GPIO_PAR_BE_BE2_FB_A0 |
-+ MCF_GPIO_PAR_BE_BE1_BE1 | MCF_GPIO_PAR_BE_BE0_BE0;
-+
-+ MCF_GPIO_PAR_CS &= (MCF_GPIO_PAR_BE_BE3_MASK &
-+ MCF_GPIO_PAR_BE_BE2_MASK);
-+ MCF_GPIO_PAR_CS |= MCF_GPIO_PAR_CS_CS1_NFC_CE;
-+ return;
-+}
-+
-+/* Read NAND Ready/Busy signal */
-+static int
-+fsl_nfc_dev_ready(struct mtd_info *mtd)
-+{
-+ /*
-+ * NFC handles ready/busy signal internally. Therefore, this function
-+ * always returns status as ready.
-+ */
-+ return 1;
-+}
-+
-+/* Write command to NAND flash */
-+static void
-+fsl_nfc_command(struct mtd_info *mtd, unsigned command,
-+ int column, int page)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+
-+ prv->column = (column >= 0) ? column : 0;
-+ prv->spareonly = 0;
-+ get_id = 0;
-+ get_status = 0;
-+
-+ if (page != -1)
-+ prv->page = page;
-+
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_MODE_MASK,
-+ CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE);
-+
-+ if (!(page%0x40)) {
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_MODE_MASK,
-+ CONFIG_ECC_MODE_SHIFT, ECC_BYPASS);
-+ }
-+
-+ switch (command) {
-+ case NAND_CMD_PAGEPROG:
-+ if (!(prv->page%0x40))
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_MODE_MASK,
-+ CONFIG_ECC_MODE_SHIFT, ECC_BYPASS);
-+
-+ fsl_nfc_send_cmd(mtd,
-+ PROGRAM_PAGE_CMD_BYTE1,
-+ PROGRAM_PAGE_CMD_BYTE2,
-+ PROGRAM_PAGE_CMD_CODE);
-+ break;
-+ /*
-+ * NFC does not support sub-page reads and writes,
-+ * so emulate them using full page transfers.
-+ */
-+ case NAND_CMD_READ0:
-+ column = 0;
-+ goto read0;
-+ break;
-+
-+ case NAND_CMD_READ1:
-+ prv->column += 256;
-+ command = NAND_CMD_READ0;
-+ column = 0;
-+ goto read0;
-+ break;
-+
-+ case NAND_CMD_READOOB:
-+ prv->spareonly = 1;
-+ command = NAND_CMD_READ0;
-+ column = 0;
-+read0:
-+ fsl_nfc_send_cmd(mtd,
-+ PAGE_READ_CMD_BYTE1,
-+ PAGE_READ_CMD_BYTE2,
-+ READ_PAGE_CMD_CODE);
-+ break;
-+
-+ case NAND_CMD_SEQIN:
-+ fsl_nfc_command(mtd, NAND_CMD_READ0, column, page);
-+ column = 0;
-+ break;
-+
-+ case NAND_CMD_ERASE1:
-+ fsl_nfc_send_cmd(mtd,
-+ ERASE_CMD_BYTE1,
-+ ERASE_CMD_BYTE2,
-+ ERASE_CMD_CODE);
-+ break;
-+ case NAND_CMD_ERASE2:
-+ return;
-+ case NAND_CMD_READID:
-+ get_id = 1;
-+ fsl_nfc_send_one_byte(mtd, command, READ_ID_CMD_CODE);
-+ break;
-+ case NAND_CMD_STATUS:
-+ get_status = 1;
-+ fsl_nfc_send_one_byte(mtd, command, STATUS_READ_CMD_CODE);
-+ break;
-+ case NAND_CMD_RNDOUT:
-+ fsl_nfc_send_cmd(mtd,
-+ RANDOM_OUT_CMD_BYTE1,
-+ RANDOM_OUT_CMD_BYTE2,
-+ RANDOM_OUT_CMD_CODE);
-+ break;
-+ case NAND_CMD_RESET:
-+ fsl_nfc_send_one_byte(mtd, command, RESET_CMD_CODE);
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ fsl_nfc_addr_cycle(mtd, column, page);
-+
-+ fsl_nfc_done(mtd);
-+}
-+
-+/* Copy data from/to NFC spare buffers. */
-+static void
-+fsl_nfc_copy_spare(struct mtd_info *mtd, uint offset,
-+ u8 *buffer, uint size, int wr)
-+{
-+ struct nand_chip *nand = mtd->priv;
-+ struct fsl_nfc_prv *prv = nand->priv;
-+ uint o, s, sbsize, blksize;
-+
-+ /*
-+ * NAND spare area is available through NFC spare buffers.
-+ * The NFC divides spare area into (page_size / 512) chunks.
-+ * Each chunk is placed into separate spare memory area, using
-+ * first (spare_size / num_of_chunks) bytes of the buffer.
-+ *
-+ * For NAND device in which the spare area is not divided fully
-+ * by the number of chunks, number of used bytes in each spare
-+ * buffer is rounded down to the nearest even number of bytes,
-+ * and all remaining bytes are added to the last used spare area.
-+ *
-+ * For more information read section 26.6.10 of MPC5121e
-+ * Microcontroller Reference Manual, Rev. 3.
-+ */
-+
-+ /* Calculate number of valid bytes in each spare buffer */
-+/* sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1;*/
-+ sbsize = (mtd->oobsize / (mtd->writesize / 2048)) & ~1;
-+
-+
-+ while (size) {
-+ /* Calculate spare buffer number */
-+ s = offset / sbsize;
-+ if (s > NFC_SPARE_BUFFERS - 1)
-+ s = NFC_SPARE_BUFFERS - 1;
-+
-+ /*
-+ * Calculate offset to requested data block in selected spare
-+ * buffer and its size.
-+ */
-+ o = offset - (s * sbsize);
-+ blksize = min(sbsize - o, size);
-+
-+ if (wr)
-+ memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o,
-+ buffer, blksize);
-+ else {
-+ memcpy_fromio(buffer,
-+ prv->regs + NFC_SPARE_AREA(s) + o, blksize);
-+ }
-+
-+ buffer += blksize;
-+ offset += blksize;
-+ size -= blksize;
-+ };
-+}
-+
-+/* Copy data from/to NFC main and spare buffers */
-+static void
-+fsl_nfc_buf_copy(struct mtd_info *mtd, u_char *buf, int len, int wr)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+ uint c = prv->column;
-+ uint l;
-+
-+ /* Handle spare area access */
-+ if (prv->spareonly || c >= mtd->writesize) {
-+ /* Calculate offset from beginning of spare area */
-+ if (c >= mtd->writesize)
-+ c -= mtd->writesize;
-+
-+ prv->column += len;
-+ fsl_nfc_copy_spare(mtd, c, buf, len, wr);
-+ return;
-+ }
-+
-+ /*
-+ * Handle main area access - limit copy length to prevent
-+ * crossing main/spare boundary.
-+ */
-+ l = min((uint)len, mtd->writesize - c);
-+ prv->column += l;
-+
-+ if (wr)
-+ memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l);
-+ else {
-+ if (get_status) {
-+ get_status = 0;
-+ *buf = fsl_nfc_get_status(mtd);
-+ } else if (l == 1 && c <= 3 && get_id) {
-+ *buf = fsl_nfc_get_id(mtd, c);
-+ } else
-+ memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l);
-+ }
-+
-+ /* Handle crossing main/spare boundary */
-+ if (l != len) {
-+ buf += l;
-+ len -= l;
-+ fsl_nfc_buf_copy(mtd, buf, len, wr);
-+ }
-+}
-+
-+/* Read data from NFC buffers */
-+static void
-+fsl_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+ fsl_nfc_buf_copy(mtd, buf, len, 0);
-+}
-+
-+/* Write data to NFC buffers */
-+static void
-+fsl_nfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ fsl_nfc_buf_copy(mtd, (u_char *)buf, len, 1);
-+}
-+
-+/* Compare buffer with NAND flash */
-+static int
-+fsl_nfc_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ u_char tmp[256];
-+ uint bsize;
-+
-+ while (len) {
-+ bsize = min(len, 256);
-+ fsl_nfc_read_buf(mtd, tmp, bsize);
-+
-+ if (memcmp(buf, tmp, bsize))
-+ return 1;
-+
-+ buf += bsize;
-+ len -= bsize;
-+ }
-+
-+ return 0;
-+}
-+
-+/* Read byte from NFC buffers */
-+static u8
-+fsl_nfc_read_byte(struct mtd_info *mtd)
-+{
-+ u8 tmp;
-+ fsl_nfc_read_buf(mtd, &tmp, sizeof(tmp));
-+ return tmp;
-+}
-+
-+/* Read word from NFC buffers */
-+static u16
-+fsl_nfc_read_word(struct mtd_info *mtd)
-+{
-+ u16 tmp;
-+ fsl_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
-+ return tmp;
-+}
-+
-+#if 0
-+static void fsl_nfc_check_ecc_status(struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+ u8 ecc_status, ecc_count;
-+
-+ ecc_status = *(u8 *)(prv->regs + ECC_SRAM_ADDR * 8 + 7);
-+ ecc_count = ecc_status & ECC_ERR_COUNT;
-+ if (ecc_status & ECC_STATUS_MASK) {
-+ /*mtd->ecc_stats.failed++;*/
-+ printk("ECC failed to correct all errors!\n");
-+ } else if (ecc_count) {
-+ /*mtd->ecc_stats.corrected += ecc_count;*/
-+ printk(KERN_INFO"ECC corrected %d errors\n", ecc_count);
-+ }
-+
-+}
-+#endif
-+
-+static void
-+copy_from_to_spare(struct mtd_info *mtd, void *pbuf, int len, int wr)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+ int i, copy_count, copy_size;
-+
-+/* copy_count = mtd->writesize / 512;*/
-+ copy_count = mtd->writesize / 2048;
-+ /*
-+ * Each spare area has 16 bytes for 512, 2K and normal 4K nand.
-+ * For 4K nand with large 218 byte spare size, the size is 26 bytes for
-+ * the first 7 buffers and 36 for the last.
-+ */
-+/* copy_size = mtd->oobsize == 218 ? 26 : 16;*/
-+ copy_size = 64;
-+
-+ /*
-+ * Each spare area has 16 bytes for 512, 2K and normal 4K nand.
-+ * For 4K nand with large 218 byte spare size, the size is 26
-+ * bytes for the first 7 buffers and 36 for the last.
-+ */
-+ for (i = 0; i < copy_count - 1 && len > 0; i++) {
-+ if (wr)
-+ memcpy_toio(prv->regs + NFC_SPARE_AREA(i),
-+ pbuf, MIN(len, copy_size));
-+ else
-+ memcpy_fromio(pbuf, prv->regs + NFC_SPARE_AREA(i),
-+ MIN(len, copy_size));
-+ pbuf += copy_size;
-+ len -= copy_size;
-+ }
-+ if (len > 0) {
-+ if (wr)
-+ memcpy_toio(prv->regs + NFC_SPARE_AREA(i),
-+ pbuf, len);
-+ else
-+ memcpy_fromio(pbuf,
-+ prv->regs + NFC_SPARE_AREA(i), len);
-+ }
-+}
-+
-+
-+static int fsl_nfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-+ int page, int sndcmd)
-+{
-+ fsl_nfc_command(mtd, NAND_CMD_READ0, 0, page);
-+
-+ copy_from_to_spare(mtd, chip->oob_poi, mtd->oobsize, 0);
-+ return 0;
-+}
-+
-+static int fsl_nfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
-+ int page)
-+{
-+ fsl_nfc_command(mtd, NAND_CMD_READ0, 0, page);
-+ /* copy the oob data */
-+ copy_from_to_spare(mtd, chip->oob_poi, mtd->oobsize, 1);
-+ fsl_nfc_command(mtd, NAND_CMD_PAGEPROG, 0, page);
-+ return 0;
-+}
-+
-+static int fsl_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint8_t *buf, int page)
-+{
-+ struct fsl_nfc_prv *prv = chip->priv;
-+ /*fsl_nfc_check_ecc_status(mtd);*/
-+
-+ memcpy_fromio((void *)buf, prv->regs + NFC_MAIN_AREA(0),
-+ mtd->writesize);
-+ copy_from_to_spare(mtd, chip->oob_poi, mtd->oobsize, 0);
-+ return 0;
-+}
-+
-+static void fsl_nfc_write_page(struct mtd_info *mtd,
-+ struct nand_chip *chip, const uint8_t *buf)
-+{
-+ struct fsl_nfc_prv *prv = chip->priv;
-+ memcpy_toio(prv->regs + NFC_MAIN_AREA(0), buf, mtd->writesize);
-+ copy_from_to_spare(mtd, chip->oob_poi, mtd->oobsize, 1);
-+}
-+
-+static void fsl_nfc_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+ return;
-+}
-+
-+/* Free driver resources */
-+static void
-+fsl_nfc_free(struct platform_device *dev, struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+
-+ kfree(prv);
-+}
-+
-+static int __devinit
-+fsl_nfc_probe(struct platform_device *pdev)
-+{
-+ struct fsl_nfc_prv *prv;
-+ struct resource *res;
-+ struct mtd_info *mtd;
-+#ifdef CONFIG_MTD_PARTITIONS
-+ struct mtd_partition *parts;
-+#endif
-+ struct nand_chip *chip;
-+ unsigned long regs_paddr, regs_size;
-+ int retval = 0;
-+
-+ prv = kzalloc(sizeof(*prv), GFP_KERNEL);
-+ if (!prv) {
-+ printk(KERN_ERR DRV_NAME ": Memory exhausted!\n");
-+ return -ENOMEM;
-+ }
-+ mtd = &prv->mtd;
-+ chip = &prv->chip;
-+
-+ mtd->priv = chip;
-+ chip->priv = prv;
-+
-+ prv->irq = platform_get_irq(pdev, 0);
-+ if (prv->irq <= 0) {
-+ printk(KERN_ERR DRV_NAME ": Error mapping IRQ!\n");
-+ return -EINVAL;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (res == NULL) {
-+ printk(KERN_ERR "%s platform_get_resource MEM failed %x\n",
-+ __func__, (unsigned int)res);
-+ retval = -ENOMEM;
-+ goto error;
-+ }
-+ regs_paddr = res->start;
-+ regs_size = res->end - res->start + 1;
-+
-+#if 0
-+ if (!request_mem_region(regs_paddr, regs_size, DRV_NAME)) {
-+ printk(KERN_ERR DRV_NAME ": Error requesting memory region!\n");
-+ return -EBUSY;
-+ }
-+
-+ prv->regs = ioremap(regs_paddr, regs_size);
-+#endif
-+ prv->regs = (void __iomem *)regs_paddr;
-+ if (!prv->regs) {
-+ printk(KERN_ERR DRV_NAME ": Error mapping memory region!\n");
-+ return -ENOMEM;
-+ }
-+
-+ mtd->name = "NAND";
-+ mtd->writesize = 2048;
-+ mtd->oobsize = 64;
-+
-+ chip->dev_ready = fsl_nfc_dev_ready;
-+ chip->cmdfunc = fsl_nfc_command;
-+ chip->read_byte = fsl_nfc_read_byte;
-+ chip->read_word = fsl_nfc_read_word;
-+ chip->read_buf = fsl_nfc_read_buf;
-+ chip->write_buf = fsl_nfc_write_buf;
-+ chip->verify_buf = fsl_nfc_verify_buf;
-+ chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT |
-+ NAND_BUSWIDTH_16 | NAND_CACHEPRG;
-+
-+ chip->select_chip = m54418twr_select_chip;
-+
-+ if (hardware_ecc) {
-+ chip->ecc.read_page = fsl_nfc_read_page;
-+ chip->ecc.write_page = fsl_nfc_write_page;
-+ chip->ecc.read_oob = fsl_nfc_read_oob;
-+ chip->ecc.write_oob = fsl_nfc_write_oob;
-+ chip->ecc.layout = &fsl_nfc_ecc45;
-+
-+ /* propagate ecc.layout to mtd_info */
-+ mtd->ecclayout = chip->ecc.layout;
-+ chip->ecc.calculate = NULL;
-+ chip->ecc.hwctl = fsl_nfc_enable_hwecc;
-+ chip->ecc.correct = NULL;
-+ chip->ecc.mode = NAND_ECC_HW;
-+ /* RS-ECC is applied for both MAIN+SPARE not MAIN alone */
-+ chip->ecc.steps = 1;
-+ chip->ecc.bytes = 45;
-+ chip->ecc.size = 0x800;
-+
-+ /* set ECC mode = ECC_45_BYTE */
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_MODE_MASK,
-+ CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE);
-+ /* set ECC_STATUS write position */
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_SRAM_ADDR_MASK,
-+ CONFIG_ECC_SRAM_ADDR_SHIFT, ECC_SRAM_ADDR);
-+ /* enable ECC_STATUS results write */
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_SRAM_REQ_MASK,
-+ CONFIG_ECC_SRAM_REQ_SHIFT, 1);
-+ } else {
-+ chip->ecc.mode = NAND_ECC_SOFT;
-+ /* set ECC BY_PASS */
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_MODE_MASK,
-+ CONFIG_ECC_MODE_SHIFT, ECC_BYPASS);
-+ }
-+ chip->bbt_td = &bbt_main_descr;
-+ chip->bbt_md = &bbt_mirror_descr;
-+ bbt_main_descr.pattern = bbt_pattern;
-+ bbt_mirror_descr.pattern = mirror_pattern;
-+
-+ init_waitqueue_head(&prv->irq_waitq);
-+ retval = request_irq(prv->irq, fsl_nfc_irq, IRQF_DISABLED,
-+ DRV_NAME, mtd);
-+ if (retval) {
-+ printk(KERN_ERR DRV_NAME ": Error requesting IRQ!\n");
-+ goto error;
-+ }
-+
-+ /* SET SECTOR SIZE */
-+ nfc_write(mtd, NFC_SECTOR_SIZE, PAGE_2K | PAGE_64);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ADDR_AUTO_INCR_MASK,
-+ CONFIG_ADDR_AUTO_INCR_SHIFT, 0);
-+
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_BUFNO_AUTO_INCR_MASK,
-+ CONFIG_BUFNO_AUTO_INCR_SHIFT, 0);
-+ /* SET FAST_FLASH = 1 */
-+#if 0
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_FAST_FLASH_MASK,
-+ CONFIG_FAST_FLASH_SHIFT, 1);
-+#endif
-+
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_16BIT_MASK,
-+ CONFIG_16BIT_SHIFT, 1);
-+
-+
-+ /* Detect NAND chips */
-+ if (nand_scan(mtd, 1)) {
-+ printk(KERN_ERR DRV_NAME ": NAND Flash not found !\n");
-+ free_irq(prv->irq, mtd);
-+ retval = -ENXIO;
-+ goto error;
-+ }
-+
-+ platform_set_drvdata(pdev, mtd);
-+
-+ /* Register device in MTD */
-+#ifdef CONFIG_MTD_PARTITIONS
-+ retval = parse_mtd_partitions(mtd, fsl_nfc_pprobes, &parts, 0);
-+ if (retval < 0) {
-+ printk(KERN_ERR DRV_NAME ": Error parsing MTD partitions!\n");
-+ free_irq(prv->irq, mtd);
-+ retval = -EINVAL;
-+ goto error;
-+ }
-+
-+ printk(KERN_DEBUG "parse partition: partnr = %d\n", retval);
-+
-+ if (retval > 0)
-+ retval = add_mtd_partitions(mtd, parts, retval);
-+ else
-+#endif
-+ retval = add_mtd_device(mtd);
-+
-+ if (retval) {
-+ printk(KERN_ERR DRV_NAME ": Error adding MTD device!\n");
-+ free_irq(prv->irq, mtd);
-+ goto error;
-+ }
-+
-+ return 0;
-+error:
-+ fsl_nfc_free(pdev, mtd);
-+ return retval;
-+}
-+
-+static int __exit
-+fsl_nfc_remove(struct platform_device *pdev)
-+{
-+ struct mtd_info *mtd = platform_get_drvdata(pdev);
-+ struct nand_chip *chip = mtd->priv;
-+ struct fsl_nfc_prv *prv = chip->priv;
-+
-+ nand_release(mtd);
-+ free_irq(prv->irq, mtd);
-+ fsl_nfc_free(pdev, mtd);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver fsl_nfc_driver = {
-+ .probe = fsl_nfc_probe,
-+ .remove = __exit_p(fsl_nfc_remove),
-+ .suspend = NULL,
-+ .resume = NULL,
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init fsl_nfc_init(void)
-+{
-+ pr_info("FSL NFC MTD nand Driver %s\n", DRV_VERSION);
-+ if (platform_driver_register(&fsl_nfc_driver) != 0) {
-+ printk(KERN_ERR DRV_NAME ": Driver register failed!\n");
-+ return -ENODEV;
-+ }
-+ return 0;
-+}
-+
-+static void __exit fsl_nfc_cleanup(void)
-+{
-+ platform_driver_unregister(&fsl_nfc_driver);
-+}
-+
-+module_init(fsl_nfc_init);
-+module_exit(fsl_nfc_cleanup);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("FSL NFC NAND MTD driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
diff --git a/target/linux/coldfire/patches/017-Add-cpu-dma-sync-function-for-coldfire-platform.patch b/target/linux/coldfire/patches/017-Add-cpu-dma-sync-function-for-coldfire-platform.patch
deleted file mode 100644
index 6151c97..0000000
--- a/target/linux/coldfire/patches/017-Add-cpu-dma-sync-function-for-coldfire-platform.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 04491155db32bc1a9c0b367a7cac0f4a9ea9c4d2 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:43 +0800
-Subject: [PATCH 17/52] Add cpu dma sync function for coldfire platform
-
-This patch add dma_sync_sg_for_cpu() and dma_sync_single_for_cpu()
-for coldfire platform. The previous empty function do not flush the
-cache for the ram used for DMA.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/include/asm/dma-mapping.h | 10 ++++++++--
- 1 files changed, 8 insertions(+), 2 deletions(-)
-
---- a/arch/m68k/include/asm/dma-mapping.h
-+++ b/arch/m68k/include/asm/dma-mapping.h
-@@ -21,6 +21,9 @@ extern void *dma_alloc_coherent(struct d
- extern void dma_free_coherent(struct device *, size_t,
- void *, dma_addr_t);
-
-+extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
-+ enum dma_data_direction);
-+
- static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t *handle, gfp_t flag)
- {
-@@ -42,6 +45,7 @@ extern dma_addr_t dma_map_single(struct
- static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
- size_t size, enum dma_data_direction dir)
- {
-+ dma_sync_single_for_device(dev, addr, size, dir);
- }
-
- extern dma_addr_t dma_map_page(struct device *, struct page *,
-@@ -50,6 +54,7 @@ extern dma_addr_t dma_map_page(struct de
- static inline void dma_unmap_page(struct device *dev, dma_addr_t address,
- size_t size, enum dma_data_direction dir)
- {
-+ dma_sync_single_for_device(dev, address, size, dir);
- }
-
- extern int dma_map_sg(struct device *, struct scatterlist *, int,
-@@ -57,10 +62,9 @@ extern int dma_map_sg(struct device *, s
- static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nhwentries, enum dma_data_direction dir)
- {
-+ dma_map_sg(dev, sg, nhwentries, dir);
- }
-
--extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
-- enum dma_data_direction);
- extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
- enum dma_data_direction);
-
-@@ -75,11 +79,13 @@ static inline void dma_sync_single_range
- static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
- size_t size, enum dma_data_direction dir)
- {
-+ dma_sync_single_for_device(dev, handle, size, dir);
- }
-
- static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction dir)
- {
-+ dma_sync_sg_for_device(dev, sg, nents, dir);
- }
-
- static inline void dma_sync_single_range_for_cpu(struct device *dev,
diff --git a/target/linux/coldfire/patches/018-Add-SSD1289-TFT-LCD-framebuffer-driver-on-TWR-MCF544.patch b/target/linux/coldfire/patches/018-Add-SSD1289-TFT-LCD-framebuffer-driver-on-TWR-MCF544.patch
deleted file mode 100644
index ec20346..0000000
--- a/target/linux/coldfire/patches/018-Add-SSD1289-TFT-LCD-framebuffer-driver-on-TWR-MCF544.patch
+++ /dev/null
@@ -1,973 +0,0 @@
-From c1de95e3a608c48b5576e32181480930d9106ac4 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:44 +0800
-Subject: [PATCH 18/52] Add SSD1289 TFT LCD framebuffer driver on TWR-MCF5441X
-
-Add SSD1289 TFT LCD framebuffer driver on TWR-MCF5441X. Flexbus and spi
-interfaces are both supported.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5441x/config.c | 1 +
- arch/m68k/coldfire/m5441x/devices.c | 1 +
- arch/m68k/include/asm/fsl-ssd1289-fb.h | 93 ++++
- drivers/video/Kconfig | 24 +
- drivers/video/Makefile | 1 +
- drivers/video/fsl-ssd1289-fb.c | 791 ++++++++++++++++++++++++++++++++
- 6 files changed, 911 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/include/asm/fsl-ssd1289-fb.h
- create mode 100644 drivers/video/fsl-ssd1289-fb.c
-
---- a/arch/m68k/coldfire/m5441x/config.c
-+++ b/arch/m68k/coldfire/m5441x/config.c
-@@ -45,6 +45,7 @@
- #include <asm/mcf5441x_fbcs.h>
- #include <asm/mcf5441x_dtim.h>
- #include <asm/mcf5441x_xbs.h>
-+#include <asm/fsl-ssd1289-fb.h>
-
- extern int get_irq_list(struct seq_file *p, void *v);
- extern char _text, _end;
---- a/arch/m68k/coldfire/m5441x/devices.c
-+++ b/arch/m68k/coldfire/m5441x/devices.c
-@@ -33,6 +33,7 @@
- #include <asm/mcfqspi.h>
- #include <asm/mcfdspi.h>
- #include <asm/cf_io.h>
-+#include <asm/fsl-ssd1289-fb.h>
-
- /*
- * I2C: only support i2c0 module on m5441x platform
---- /dev/null
-+++ b/arch/m68k/include/asm/fsl-ssd1289-fb.h
-@@ -0,0 +1,93 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Freescale MCF54418 SSD1289 TFT LCD framebuffer driver
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __FSL_SSD1289_FB_H__
-+#define __FSL_SSD1289_FB_H__
-+
-+#define SSD1289_REG_OSCILLATION 0x00
-+#define SSD1289_REG_DRIVER_OUT_CTRL 0x01
-+#define SSD1289_REG_LCD_DRIVE_AC 0x02
-+#define SSD1289_REG_POWER_CTRL_1 0x03
-+#define SSD1289_REG_COMPARE_1 0x05
-+#define SSD1289_REG_COMPARE_2 0x06
-+#define SSD1289_REG_DISPLAY_CTRL 0x07
-+#define SSD1289_REG_FRAME_CYCLE 0x0b
-+#define SSD1289_REG_POWER_CTRL_2 0x0c
-+#define SSD1289_REG_POWER_CTRL_3 0x0d
-+#define SSD1289_REG_POWER_CTRL_4 0x0e
-+#define SSD1289_REG_GATE_SCAN_START 0x0f
-+#define SSD1289_REG_SLEEP_MODE 0x10
-+#define SSD1289_REG_ENTRY_MODE 0x11
-+#define SSD1289_REG_OPT_SPEED_3 0x12
-+#define SSD1289_REG_H_PORCH 0x16
-+#define SSD1289_REG_V_PORCH 0x17
-+#define SSD1289_REG_POWER_CTRL_5 0x1e
-+#define SSD1289_REG_GDDRAM_DATA 0x22
-+#define SSD1289_REG_WR_DATA_MASK_1 0x23
-+#define SSD1289_REG_WR_DATA_MASK_2 0x24
-+#define SSD1289_REG_FRAME_FREQUENCY 0x25
-+#define SSD1289_REG_OPT_SPEED_1 0x28
-+#define SSD1289_REG_OPT_SPEED_2 0x2f
-+#define SSD1289_REG_GAMMA_CTRL_1 0x30
-+#define SSD1289_REG_GAMMA_CTRL_2 0x31
-+#define SSD1289_REG_GAMMA_CTRL_3 0x32
-+#define SSD1289_REG_GAMMA_CTRL_4 0x33
-+#define SSD1289_REG_GAMMA_CTRL_5 0x34
-+#define SSD1289_REG_GAMMA_CTRL_6 0x35
-+#define SSD1289_REG_GAMMA_CTRL_7 0x36
-+#define SSD1289_REG_GAMMA_CTRL_8 0x37
-+#define SSD1289_REG_GAMMA_CTRL_9 0x3a
-+#define SSD1289_REG_GAMMA_CTRL_10 0x3b
-+#define SSD1289_REG_V_SCROLL_CTRL_1 0x41
-+#define SSD1289_REG_V_SCROLL_CTRL_2 0x42
-+#define SSD1289_REG_H_RAM_ADR_POS 0x44
-+#define SSD1289_REG_V_RAM_ADR_START 0x45
-+#define SSD1289_REG_V_RAM_ADR_END 0x46
-+#define SSD1289_REG_FIRST_WIN_START 0x48
-+#define SSD1289_REG_FIRST_WIN_END 0x49
-+#define SSD1289_REG_SECND_WIN_START 0x4a
-+#define SSD1289_REG_SECND_WIN_END 0x4b
-+#define SSD1289_REG_GDDRAM_X_ADDR 0x4e
-+#define SSD1289_REG_GDDRAM_Y_ADDR 0x4f
-+
-+struct ssd1289 {
-+ void __iomem *cmd;
-+ void __iomem *data;
-+} __packed;
-+
-+struct fsl_ssd1289_fb_info {
-+ struct device *dev;
-+ struct ssd1289 ssd1289_reg;
-+ int openflag;
-+ struct spi_device *spidev;
-+
-+ struct task_struct *task;
-+ unsigned long pseudo_palette[16];
-+};
-+
-+/* LCD description */
-+struct fsl_ssd1289_fb_display {
-+ /* Screen size */
-+ unsigned short width;
-+ unsigned short height;
-+
-+ /* Screen info */
-+ unsigned short xres;
-+ unsigned short yres;
-+ unsigned short bpp;
-+};
-+
-+#define FLEXBUS_LCD_CMD_ADDRESS 0xc0000000
-+#define FLEXBUS_LCD_DATA_ADDRESS 0xc0010000
-+
-+#define SPI_LCD_BLOCK_SIZE 4096
-+#define SPI_LCD_BLOCK_HALF_SIZE 2048
-+#endif
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -1980,6 +1980,30 @@ config FB_FSL_DIU
- ---help---
- Framebuffer driver for the Freescale SoC DIU
-
-+config FB_FSL_SSD1289
-+ tristate "SSD1289 TFT LCD (Freescale MCF54418)"
-+ depends on FB && M5441X
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FB_SYS_FOPS
-+ ---help---
-+ This is the framebuffer device driver for a Solomon Systech 240RGBx320
-+ TFT LCD SSD1289.
-+
-+choice
-+ prompt "SSD1289 LCD Controller Interface mode"
-+ depends on FB_FSL_SSD1289
-+
-+config SSD1289_FLEXBUS_MODE
-+ bool "SSD1289 LCD Controller Flexbus Interface mode"
-+
-+config SSD1289_SPI_MODE
-+ bool "SSD1289 LCD Controller SPI Interface mode"
-+ depends on SPI_DSPI && DSPI0
-+
-+endchoice
-+
- config FB_W100
- tristate "W100 frame buffer support"
- depends on FB && ARCH_PXA
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -120,6 +120,7 @@ obj-$(CONFIG_FB_IMX) += imx
- obj-$(CONFIG_FB_S3C) += s3c-fb.o
- obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
- obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
-+obj-$(CONFIG_FB_FSL_SSD1289) += fsl-ssd1289-fb.o
- obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
- obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
- obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/
---- /dev/null
-+++ b/drivers/video/fsl-ssd1289-fb.c
-@@ -0,0 +1,791 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Freescale MCF54418 SSD1289 TFT LCD framebuffer driver
-+ *
-+ * Author: Alison Wang <b18965@freescale.com>
-+ * Jason Jin <Jason.jin@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/uaccess.h>
-+#include <linux/timer.h>
-+#include <linux/kthread.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/mcf5441x_fbcs.h>
-+#include <asm/mcf5441x_dspi.h>
-+#include <asm/fsl-ssd1289-fb.h>
-+#include <asm/mcf5441x_gpio.h>
-+#include <asm/mcf5441x_ccm.h>
-+#include <asm/mcf_edma.h>
-+
-+#ifdef CONFIG_PM
-+#include <linux/pm.h>
-+#endif
-+
-+#if defined(CONFIG_SSD1289_SPI_MODE)
-+unsigned char spi_block_buffer[SPI_LCD_BLOCK_SIZE];
-+
-+static int ssd1289_spi_writeblock(struct fb_info *info,
-+ unsigned char *daddr, int flag)
-+{
-+ struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+ struct spi_device *devtmp;
-+ int i;
-+
-+ for (i = 0; i < SPI_LCD_BLOCK_SIZE; i++) {
-+ if (i % 2 == 0)
-+ spi_block_buffer[i] = 0x01;
-+ else if (flag == 1)
-+ spi_block_buffer[i] = *(daddr + (i >> 1));
-+ else if (flag == 0)
-+ spi_block_buffer[i] = 0;
-+ }
-+
-+ devtmp = fbinfo->spidev;
-+ spi_write(devtmp, (const unsigned char *)spi_block_buffer,
-+ SPI_LCD_BLOCK_SIZE);
-+ return 0;
-+}
-+
-+static int ssd1289_spi_write(struct fb_info *info,
-+ unsigned short value, unsigned int flag)
-+{
-+ struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+ struct spi_device *devtmp;
-+ unsigned short tmpl;
-+ unsigned short tmph;
-+
-+ devtmp = fbinfo->spidev;
-+ if (flag == 1) {
-+ /* D/C = 1 */
-+ tmph = ((value >> 8) & 0xff) + 0x0100;
-+ tmpl = (value & 0xff) + 0x0100;
-+ spi_write(devtmp, (const u8 *)&tmph, sizeof(tmph));
-+ spi_write(devtmp, (const u8 *)&tmpl, sizeof(tmpl));
-+ } else {
-+ /* D/C = 0 */
-+ tmpl = (value & 0xff);
-+ spi_write(devtmp, (const u8 *)&tmpl, sizeof(tmpl));
-+ }
-+ return 0;
-+}
-+#elif defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+static int ssd1289_flexbus_write(struct fb_info *info, unsigned short value,
-+ unsigned int flag)
-+{
-+ struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+ void __iomem *cmd_addr, *data_addr;
-+
-+ cmd_addr = fbinfo->ssd1289_reg.cmd;
-+ data_addr = fbinfo->ssd1289_reg.data;
-+
-+ if (flag == 0)
-+ out_be16(cmd_addr, value);
-+ else
-+ out_be16(data_addr, value);
-+
-+ return 0;
-+}
-+#endif
-+
-+static int ssd1289_write(struct fb_info *info, unsigned short value,
-+ unsigned int flag)
-+{
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ ssd1289_flexbus_write(info, value, flag);
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+ ssd1289_spi_write(info, value, flag);
-+#endif
-+ return 0;
-+}
-+
-+static void fsl_ssd1289_enable_lcd(struct fb_info *info)
-+{
-+ int i;
-+
-+#if defined(CONFIG_SSD1289_SPI_MODE)
-+ int count;
-+#elif defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ /* GPIO configuration */
-+ MCF_GPIO_PAR_BE = MCF_GPIO_PAR_BE_BE3_FB_A1 | MCF_GPIO_PAR_BE_BE2_FB_A0
-+ | MCF_GPIO_PAR_BE_BE1_BE1 | MCF_GPIO_PAR_BE_BE0_BE0;
-+ MCF_GPIO_PAR_CS |= MCF_GPIO_PAR_CS_CS0_CS0;
-+#endif
-+
-+ ssd1289_write(info, SSD1289_REG_DISPLAY_CTRL, 0);
-+ ssd1289_write(info, 0x0200, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_OSCILLATION, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ mdelay(100);
-+
-+ /* turn on the oscillator */
-+ ssd1289_write(info, SSD1289_REG_OSCILLATION, 0);
-+ ssd1289_write(info, 0x0001, 1);
-+
-+ mdelay(100);
-+ /* power control 1 */
-+ ssd1289_write(info, SSD1289_REG_POWER_CTRL_1, 0);
-+ ssd1289_write(info, 0xaeac, 1);
-+
-+ /* power control 2 */
-+ ssd1289_write(info, SSD1289_REG_POWER_CTRL_2, 0);
-+ ssd1289_write(info, 0x0007, 1);
-+
-+ /* power control 3 */
-+ ssd1289_write(info, SSD1289_REG_POWER_CTRL_3, 0);
-+ ssd1289_write(info, 0x000f, 1);
-+
-+ /* power control 4 */
-+ ssd1289_write(info, SSD1289_REG_POWER_CTRL_4, 0);
-+ ssd1289_write(info, 0x2900, 1);
-+
-+ /* power control 5 */
-+ ssd1289_write(info, SSD1289_REG_POWER_CTRL_5, 0);
-+ ssd1289_write(info, 0x00b3, 1);
-+
-+ mdelay(15);
-+ /* driver output control */
-+ ssd1289_write(info, SSD1289_REG_DRIVER_OUT_CTRL, 0);
-+ ssd1289_write(info, 0x2b3f, 1);
-+
-+ /* lcd-driving-waveform control */
-+ ssd1289_write(info, SSD1289_REG_LCD_DRIVE_AC, 0);
-+ ssd1289_write(info, 0x0600, 1);
-+
-+ /* sleep mode */
-+ ssd1289_write(info, SSD1289_REG_SLEEP_MODE, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ /* entry mode */
-+ ssd1289_write(info, SSD1289_REG_ENTRY_MODE, 0);
-+ ssd1289_write(info, 0x60a8, 1);
-+
-+ mdelay(15);
-+ /* compare register */
-+ ssd1289_write(info, SSD1289_REG_COMPARE_1, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_COMPARE_2, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ /* horizontal porch */
-+ ssd1289_write(info, SSD1289_REG_H_PORCH, 0);
-+ ssd1289_write(info, 0xef1c, 1);
-+
-+ /* vertical porch */
-+ ssd1289_write(info, SSD1289_REG_V_PORCH, 0);
-+ ssd1289_write(info, 0x0003, 1);
-+
-+ /* display control */
-+ ssd1289_write(info, SSD1289_REG_DISPLAY_CTRL, 0);
-+ ssd1289_write(info, 0x0233, 1);
-+
-+ /* frame cycle control */
-+ ssd1289_write(info, SSD1289_REG_FRAME_CYCLE, 0);
-+ ssd1289_write(info, 0x5312, 1);
-+
-+ /* gate scan position */
-+ ssd1289_write(info, SSD1289_REG_GATE_SCAN_START, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ mdelay(20);
-+ /* vertical scroll control */
-+ ssd1289_write(info, SSD1289_REG_V_SCROLL_CTRL_1, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_V_SCROLL_CTRL_2, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ /* 1st screen driving position */
-+ ssd1289_write(info, SSD1289_REG_FIRST_WIN_START, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_FIRST_WIN_END, 0);
-+ ssd1289_write(info, 0x013F, 1);
-+
-+ /* 2nd screen driving position */
-+ ssd1289_write(info, SSD1289_REG_SECND_WIN_START, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_SECND_WIN_END, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ mdelay(20);
-+ /* gamma control */
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_1, 0);
-+ ssd1289_write(info, 0x0707, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_2, 0);
-+ ssd1289_write(info, 0x0704, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_3, 0);
-+ ssd1289_write(info, 0x0204, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_4, 0);
-+ ssd1289_write(info, 0x0201, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_5, 0);
-+ ssd1289_write(info, 0x0203, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_6, 0);
-+ ssd1289_write(info, 0x0204, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_7, 0);
-+ ssd1289_write(info, 0x0204, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_8, 0);
-+ ssd1289_write(info, 0x0502, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_9, 0);
-+ ssd1289_write(info, 0x0302, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GAMMA_CTRL_10, 0);
-+ ssd1289_write(info, 0x0500, 1);
-+
-+ /* ram write data mask */
-+ ssd1289_write(info, SSD1289_REG_WR_DATA_MASK_1, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_WR_DATA_MASK_2, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ /* frame frequency control */
-+ ssd1289_write(info, SSD1289_REG_FRAME_FREQUENCY, 0);
-+ ssd1289_write(info, 0xe000, 1);
-+
-+ /* optimize data access speed */
-+ ssd1289_write(info, SSD1289_REG_OPT_SPEED_1, 0);
-+ ssd1289_write(info, 0x0006, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_OPT_SPEED_2, 0);
-+ ssd1289_write(info, 0x12ae, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_OPT_SPEED_3, 0);
-+ ssd1289_write(info, 0x6ceb, 1);
-+
-+ /* horizontal ram address position */
-+ ssd1289_write(info, SSD1289_REG_H_RAM_ADR_POS, 0);
-+ ssd1289_write(info, 0xef00, 1);
-+
-+ /* vertical ram address position */
-+ ssd1289_write(info, SSD1289_REG_V_RAM_ADR_START, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_V_RAM_ADR_END, 0);
-+ ssd1289_write(info, 0x013f, 1);
-+
-+ mdelay(20);
-+
-+ /* set start address counter */
-+ ssd1289_write(info, SSD1289_REG_GDDRAM_X_ADDR, 0);
-+ ssd1289_write(info, 0x00ef, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GDDRAM_Y_ADDR, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_GDDRAM_DATA, 0);
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ for (i = 0; i < info->screen_size; i += 2)
-+ ssd1289_write(info, 0, 1);
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+ count = info->screen_size / SPI_LCD_BLOCK_HALF_SIZE;
-+ for (i = 0; i < count; i++)
-+ ssd1289_spi_writeblock(info, NULL, 0);
-+#endif
-+}
-+
-+static void fsl_ssd1289_disable_lcd(struct fb_info *info)
-+{
-+ ssd1289_write(info, SSD1289_REG_DISPLAY_CTRL, 0);
-+ ssd1289_write(info, 0x0200, 1);
-+
-+ ssd1289_write(info, SSD1289_REG_OSCILLATION, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+}
-+
-+static int ssd1289fbd(void *arg)
-+{
-+ struct fb_info *info = arg;
-+ int i;
-+ unsigned short *buf_p;
-+ struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+#if defined(CONFIG_SSD1289_SPI_MODE)
-+ unsigned char *bufspi_p;
-+ int count;
-+#endif
-+
-+ while (!kthread_should_stop()) {
-+ set_current_state(TASK_INTERRUPTIBLE);
-+
-+ if (fbinfo->openflag == 1) {
-+ buf_p = (unsigned short *)(info->screen_base);
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ for (i = 0; i < info->screen_size; i += 2) {
-+ ssd1289_write(info, *buf_p, 1);
-+ buf_p++;
-+ }
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+ bufspi_p = (unsigned char *)buf_p;
-+ count = info->screen_size / SPI_LCD_BLOCK_HALF_SIZE;
-+ for (i = 0; i < count; i++)
-+ ssd1289_spi_writeblock(info, (bufspi_p +
-+ SPI_LCD_BLOCK_HALF_SIZE * i), 1);
-+#endif
-+ }
-+ schedule_timeout(HZ/25);
-+ }
-+
-+ return 0;
-+}
-+
-+static int fsl_ssd1289_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ if (var->xres_virtual < var->xres)
-+ var->xres_virtual = var->xres;
-+ if (var->yres_virtual < var->yres)
-+ var->yres_virtual = var->yres;
-+
-+ if (var->xoffset < 0)
-+ var->xoffset = 0;
-+
-+ if (var->yoffset < 0)
-+ var->yoffset = 0;
-+
-+ if (var->xoffset + info->var.xres > info->var.xres_virtual)
-+ var->xoffset = info->var.xres_virtual - info->var.xres;
-+
-+ if (var->yoffset + info->var.yres > info->var.yres_virtual)
-+ var->yoffset = info->var.yres_virtual - info->var.yres;
-+
-+ switch (var->bits_per_pixel) {
-+ case 8:
-+ /* 8 bpp, 332 format */
-+ var->red.length = 3;
-+ var->red.offset = 5;
-+ var->red.msb_right = 0;
-+
-+ var->green.length = 3;
-+ var->green.offset = 2;
-+ var->green.msb_right = 0;
-+
-+ var->blue.length = 2;
-+ var->blue.offset = 0;
-+ var->blue.msb_right = 0;
-+
-+ var->transp.length = 0;
-+ var->transp.offset = 0;
-+ var->transp.msb_right = 0;
-+ break;
-+ case 16:
-+ /* 16 bpp, 565 format */
-+ var->red.length = 5;
-+ var->red.offset = 11;
-+ var->red.msb_right = 0;
-+
-+ var->green.length = 6;
-+ var->green.offset = 5;
-+ var->green.msb_right = 0;
-+
-+ var->blue.length = 5;
-+ var->blue.offset = 0;
-+ var->blue.msb_right = 0;
-+
-+ var->transp.length = 0;
-+ var->transp.offset = 0;
-+ var->transp.msb_right = 0;
-+ break;
-+ default:
-+ printk(KERN_ERR "Depth not supported: %u BPP\n",
-+ var->bits_per_pixel);
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+static int fsl_ssd1289_set_par(struct fb_info *info)
-+{
-+ struct fb_var_screeninfo *var = &info->var;
-+
-+ switch (var->bits_per_pixel) {
-+ case 16:
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+ break;
-+ case 8:
-+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+ break;
-+ default:
-+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
-+{
-+ return ((val<<width) + 0x7FFF - val)>>16;
-+}
-+
-+static int fsl_ssd1289_setcolreg(unsigned regno,
-+ unsigned red, unsigned green, unsigned blue,
-+ unsigned transp, struct fb_info *info)
-+{
-+ int ret = 1;
-+
-+ /*
-+ * If greyscale is true, then we convert the RGB value
-+ * to greyscale no matter what visual we are using.
-+ */
-+ if (info->var.grayscale)
-+ red = green = blue = (19595 * red + 38470 * green +
-+ 7471 * blue) >> 16;
-+ switch (info->fix.visual) {
-+ case FB_VISUAL_TRUECOLOR:
-+ if (regno < 16) {
-+ u32 *pal = info->pseudo_palette;
-+ u32 value;
-+
-+ red = CNVT_TOHW(red, info->var.red.length);
-+ green = CNVT_TOHW(green, info->var.green.length);
-+ blue = CNVT_TOHW(blue, info->var.blue.length);
-+ transp = CNVT_TOHW(transp, info->var.transp.length);
-+
-+ value = (red << info->var.red.offset) |
-+ (green << info->var.green.offset) |
-+ (blue << info->var.blue.offset) |
-+ (transp << info->var.transp.offset);
-+
-+ pal[regno] = value;
-+ ret = 0;
-+ }
-+ break;
-+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
-+ case FB_VISUAL_PSEUDOCOLOR:
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static int fsl_ssd1289_blank(int blank_mode, struct fb_info *info)
-+{
-+ if (blank_mode == FB_BLANK_POWERDOWN)
-+ fsl_ssd1289_disable_lcd(info);
-+ else
-+ fsl_ssd1289_enable_lcd(info);
-+
-+ return 0;
-+}
-+
-+static int fsl_ssd1289_open(struct fb_info *info, int user)
-+{
-+ struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+ struct task_struct *task;
-+ int ret;
-+
-+ if (fbinfo->openflag == 0) {
-+ memset(info->screen_base, 0, info->screen_size);
-+ fsl_ssd1289_enable_lcd(info);
-+
-+ task = kthread_run(ssd1289fbd, info, "SSD1289 LCD");
-+ if (IS_ERR(task)) {
-+ ret = PTR_ERR(task);
-+ return ret;
-+ }
-+ fbinfo->task = task;
-+ }
-+
-+ fbinfo->openflag = 1;
-+ return 0;
-+}
-+
-+static int fsl_ssd1289_release(struct fb_info *info, int user)
-+{
-+ struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+
-+ fbinfo->openflag = 0;
-+ if (fbinfo->task) {
-+ struct task_struct *task = fbinfo->task;
-+ fbinfo->task = NULL;
-+ kthread_stop(task);
-+ }
-+
-+ memset(info->screen_base, 0, info->screen_size);
-+ fsl_ssd1289_disable_lcd(info);
-+ return 0;
-+}
-+
-+static struct fb_ops fsl_ssd1289_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = fsl_ssd1289_check_var,
-+ .fb_set_par = fsl_ssd1289_set_par,
-+ .fb_setcolreg = fsl_ssd1289_setcolreg,
-+ .fb_blank = fsl_ssd1289_blank,
-+ .fb_open = fsl_ssd1289_open,
-+ .fb_release = fsl_ssd1289_release,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_imageblit = cfb_imageblit,
-+};
-+
-+static int fsl_ssd1289_map_video_memory(struct fb_info *info)
-+{
-+ unsigned int map_size = info->fix.smem_len;
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+
-+ fbinfo->ssd1289_reg.cmd =
-+ ioremap_nocache(FLEXBUS_LCD_CMD_ADDRESS, 2);
-+ fbinfo->ssd1289_reg.data =
-+ ioremap_nocache(FLEXBUS_LCD_DATA_ADDRESS, 2);
-+#endif
-+
-+ info->screen_base = kmalloc(map_size, GFP_KERNEL);
-+ info->fix.smem_start = virt_to_phys(info->screen_base);
-+ info->screen_size = info->fix.smem_len;
-+
-+ if (info->screen_base)
-+ memset(info->screen_base, 0, map_size);
-+
-+ return info->screen_base ? 0 : -ENOMEM;
-+}
-+
-+static inline void fsl_ssd1289_unmap_video_memory(struct fb_info *info)
-+{
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+
-+ iounmap(fbinfo->ssd1289_reg.cmd);
-+ iounmap(fbinfo->ssd1289_reg.data);
-+#endif
-+ kfree(info->screen_base);
-+}
-+
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+static int fsl_ssd1289_probe(struct platform_device *pdev)
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+static int fsl_ssd1289_probe(struct spi_device *spi)
-+#endif
-+{
-+ struct fsl_ssd1289_fb_info *fbinfo;
-+ struct fb_info *info;
-+ struct fsl_ssd1289_fb_display *display;
-+ int ret;
-+ unsigned long smem_len;
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ info = framebuffer_alloc(sizeof(struct fsl_ssd1289_fb_info),
-+ &pdev->dev);
-+ if (!info)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, info);
-+
-+ fbinfo = info->par;
-+ fbinfo->dev = &pdev->dev;
-+ display = pdev->dev.platform_data;
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+ info = framebuffer_alloc(sizeof(struct fsl_ssd1289_fb_info),
-+ &spi->dev);
-+ if (!info)
-+ return -ENOMEM;
-+
-+ dev_set_drvdata(&spi->dev, info);
-+
-+ fbinfo = info->par;
-+ fbinfo->dev = &spi->dev;
-+ fbinfo->spidev = spi;
-+ display = spi->dev.platform_data;
-+#endif
-+
-+ fbinfo->openflag = 0;
-+ info->fix.type = FB_TYPE_PACKED_PIXELS;
-+ info->fix.type_aux = 0;
-+ info->fix.xpanstep = 0;
-+ info->fix.ypanstep = 0;
-+ info->fix.ywrapstep = 0;
-+ info->fix.accel = FB_ACCEL_NONE;
-+
-+ info->var.nonstd = 0;
-+ info->var.activate = FB_ACTIVATE_NOW;
-+ info->var.accel_flags = 0;
-+ info->var.vmode = FB_VMODE_NONINTERLACED;
-+
-+ info->fbops = &fsl_ssd1289_ops;
-+ info->flags = FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_FILLRECT
-+ | FBINFO_HWACCEL_COPYAREA;
-+ info->pseudo_palette = &fbinfo->pseudo_palette;
-+
-+ /* find maximum required memory size for display */
-+ smem_len = display->xres;
-+ smem_len *= display->yres;
-+ smem_len *= display->bpp;
-+ smem_len >>= 3;
-+ if (info->fix.smem_len < smem_len)
-+ info->fix.smem_len = smem_len;
-+
-+ /* Intialize video memory */
-+ ret = fsl_ssd1289_map_video_memory(info);
-+ if (ret) {
-+ printk(KERN_ERR "Failed to allocate video RAM: %d\n", ret);
-+ ret = -ENOMEM;
-+ goto dealloc_fb;
-+ }
-+
-+ info->var.xres = display->xres;
-+ info->var.yres = display->yres;
-+ info->var.bits_per_pixel = display->bpp;
-+ info->fix.line_length = (info->var.xres * info->var.bits_per_pixel) / 8;
-+
-+ fsl_ssd1289_check_var(&info->var, info);
-+
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ printk(KERN_ERR "Failed to register framebuffer device: %d\n",
-+ ret);
-+ goto free_video_memory;
-+ }
-+
-+ printk(KERN_INFO "fb: SSD1289 TFT LCD Framebuffer Driver\n");
-+ return 0;
-+
-+free_video_memory:
-+ fsl_ssd1289_unmap_video_memory(info);
-+dealloc_fb:
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ platform_set_drvdata(pdev, NULL);
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+ dev_set_drvdata(&spi->dev, NULL);
-+#endif
-+ framebuffer_release(info);
-+ return ret;
-+}
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+static int fsl_ssd1289_remove(struct platform_device *pdev)
-+{
-+ struct fb_info *info = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+static int fsl_ssd1289_remove(struct spi_device *spi)
-+{
-+ struct fb_info *info = dev_get_drvdata(&spi->dev);
-+
-+ dev_set_drvdata(&spi->dev, NULL);
-+#endif
-+ unregister_framebuffer(info);
-+ fsl_ssd1289_unmap_video_memory(info);
-+ framebuffer_release(info);
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+static int fsl_ssd1289_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ struct fb_info *info = platform_get_drvdata(dev);
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+static int fsl_ssd1289_suspend(struct spi_device *spi, pm_message_t state)
-+{
-+ struct fb_info *info = dev_get_drvdata(&spi->dev);
-+#endif
-+ /* enter into sleep mode */
-+ ssd1289_write(info, SSD1289_REG_SLEEP_MODE, 0);
-+ ssd1289_write(info, 0x0001, 1);
-+ return 0;
-+}
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+static int fsl_ssd1289_resume(struct platform_device *dev)
-+{
-+ struct fb_info *info = platform_get_drvdata(dev);
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+static int fsl_ssd1289_resume(struct spi_device *spi)
-+{
-+ struct fb_info *info = dev_get_drvdata(&spi->dev);
-+#endif
-+ /* leave sleep mode */
-+ ssd1289_write(info, SSD1289_REG_SLEEP_MODE, 0);
-+ ssd1289_write(info, 0x0000, 1);
-+ return 0;
-+}
-+#else
-+#define fsl_ssd1289_suspend NULL
-+#define fsl_ssd1289_resume NULL
-+#endif
-+
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+static struct platform_driver fsl_ssd1289_driver = {
-+ .probe = fsl_ssd1289_probe,
-+ .remove = fsl_ssd1289_remove,
-+ .suspend = fsl_ssd1289_suspend,
-+ .resume = fsl_ssd1289_resume,
-+ .driver = {
-+ .name = "fsl-ssd1289",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+static struct spi_driver spi_ssd1289_driver = {
-+ .driver = {
-+ .name = "spi-ssd1289",
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = fsl_ssd1289_probe,
-+ .remove = fsl_ssd1289_remove,
-+ .suspend = fsl_ssd1289_suspend,
-+ .resume = fsl_ssd1289_resume,
-+};
-+#endif
-+
-+static int __devinit fsl_ssd1289_init(void)
-+{
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ return platform_driver_register(&fsl_ssd1289_driver);
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+ return spi_register_driver(&spi_ssd1289_driver);
-+#endif
-+}
-+
-+static void __exit fsl_ssd1289_exit(void)
-+{
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ return platform_driver_unregister(&fsl_ssd1289_driver);
-+#elif defined(CONFIG_SSD1289_SPI_MODE)
-+ return spi_unregister_driver(&spi_ssd1289_driver);
-+#endif
-+}
-+
-+module_init(fsl_ssd1289_init);
-+module_exit(fsl_ssd1289_exit);
-+
-+MODULE_AUTHOR("Alison Wang <b18965@freescale.com>");
-+MODULE_DESCRIPTION("Freescale MCF54418 SSD1289 TFT LCD Framebuffer Driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/coldfire/patches/019-Fix-the-format-field-for-the-Coldfire-exception-fram.patch b/target/linux/coldfire/patches/019-Fix-the-format-field-for-the-Coldfire-exception-fram.patch
deleted file mode 100644
index 42c6f1b..0000000
--- a/target/linux/coldfire/patches/019-Fix-the-format-field-for-the-Coldfire-exception-fram.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 53cfdf92d9b68f5dac006853dd6727d7bf666b17 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:44 +0800
-Subject: [PATCH 19/52] Fix the format field for the Coldfire exception frame
-
-Different with M68K, the correct format field encoding
-for ColdFire should be 4, 5, 6 or 7.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/mm/fault.c | 4 ++++
- 1 files changed, 4 insertions(+), 0 deletions(-)
-
---- a/arch/m68k/mm/fault.c
-+++ b/arch/m68k/mm/fault.c
-@@ -45,7 +45,11 @@ int send_fault_sig(struct pt_regs *regs)
- regs->stkadj = frame_extra_sizes[regs->format];
- tregs = (struct pt_regs *)((ulong)regs + regs->stkadj);
- tregs->vector = regs->vector;
-+#ifdef CONFIG_COLDFIRE
-+ tregs->format = regs->stkadj + 4;
-+#else
- tregs->format = 0;
-+#endif
- tregs->pc = fixup->fixup;
- tregs->sr = regs->sr;
- return -1;
diff --git a/target/linux/coldfire/patches/020-Add-dual-FEC-1588-timer-support.patch b/target/linux/coldfire/patches/020-Add-dual-FEC-1588-timer-support.patch
deleted file mode 100644
index 43a258f..0000000
--- a/target/linux/coldfire/patches/020-Add-dual-FEC-1588-timer-support.patch
+++ /dev/null
@@ -1,1257 +0,0 @@
-From 67d56859d24864af530506c76523f0fc3c5cb502 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:44 +0800
-Subject: [PATCH 20/52] Add dual FEC 1588 timer support
-
-Add Modelo dual FEC 1588 function with IXXXAT statck.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/net/Kconfig | 6 +
- drivers/net/Makefile | 3 +
- drivers/net/fec.c | 153 ++++++++++++-
- drivers/net/fec.h | 25 ++
- drivers/net/fec_1588.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/fec_1588.h | 195 +++++++++++++++
- 6 files changed, 1006 insertions(+), 2 deletions(-)
- create mode 100644 drivers/net/fec_1588.c
- create mode 100644 drivers/net/fec_1588.h
-
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -1958,6 +1958,12 @@ config FEC2
- Say Y here if you want to use the second built-in 10/100 Fast
- ethernet controller on some Motorola ColdFire processors.
-
-+config FEC_1588
-+ bool "Enable 1588 interface(on some ColdFire designs)"
-+ depends on M5441X && FEC
-+ help
-+ Say Y here if 1588 function is enabled.
-+
- config FEC_548x
- tristate "MCF547x/MCF548x Fast Ethernet Controller support"
- depends on M547X_8X
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -123,6 +123,9 @@ obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
- obj-$(CONFIG_HP100) += hp100.o
- obj-$(CONFIG_SMC9194) += smc9194.o
- obj-$(CONFIG_FEC) += fec.o
-+ifeq ($(CONFIG_FEC_1588), y)
-+obj-$(CONFIG_FEC) += fec_1588.o
-+endif
- obj-$(CONFIG_FEC_548x) += fec_m547x.o
- obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
- ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
---- a/drivers/net/fec.c
-+++ b/drivers/net/fec.c
-@@ -53,6 +53,7 @@
- #endif
-
- #include "fec.h"
-+#include "fec_1588.h"
-
- #if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
- #define FEC_ALIGNMENT 0xf
-@@ -135,8 +136,15 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet
- #define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
- #define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
- #define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
-+#define FEC_ENET_TS_AVAIL ((uint)0x00010000)
-+#define FEC_ENET_TS_TIMER ((uint)0x00008000)
-
-+#if defined(CONFIG_FEC_1588)
-+#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII | \
-+ FEC_ENET_TS_AVAIL | FEC_ENET_TS_TIMER)
-+#else
- #define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII)
-+#endif
-
- /* The FEC stores dest/src/type, data, and checksum for receive packets.
- */
-@@ -209,6 +217,10 @@ struct fec_enet_private {
- int link;
- int full_duplex;
- struct completion mdio_done;
-+#ifdef CONFIG_FEC_1588
-+ struct fec_ptp_private *ptp_priv;
-+ uint ptimer_present;
-+#endif
- };
-
- static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
-@@ -252,6 +264,9 @@ fec_enet_start_xmit(struct sk_buff *skb,
- struct bufdesc *bdp;
- void *bufaddr;
- unsigned short status;
-+#ifdef CONFIG_FEC_1588
-+ unsigned long estatus;
-+#endif
- unsigned long flags;
-
- if (!fep->link) {
-@@ -293,6 +308,17 @@ fec_enet_start_xmit(struct sk_buff *skb,
- bufaddr = fep->tx_bounce[index];
- }
-
-+#ifdef CONFIG_FEC_1588
-+ if (fep->ptimer_present) {
-+ if (fec_ptp_do_txstamp(skb))
-+ estatus = BD_ENET_TX_TS;
-+ else
-+ estatus = 0;
-+
-+ bdp->cbd_esc = (estatus | BD_ENET_TX_INT);
-+ bdp->cbd_bdu = 0;
-+ }
-+#endif
- /*
- * Some design made an incorrect assumption on endian mode of
- * the system that it's running on. As the result, driver has to
-@@ -357,6 +383,9 @@ fec_enet_interrupt(int irq, void * dev_i
- {
- struct net_device *dev = dev_id;
- struct fec_enet_private *fep = netdev_priv(dev);
-+#ifdef CONFIG_FEC_1588
-+ struct fec_ptp_private *fpp = fep->ptp_priv;
-+#endif
- uint int_events;
- irqreturn_t ret = IRQ_NONE;
-
-@@ -364,6 +393,10 @@ fec_enet_interrupt(int irq, void * dev_i
- int_events = readl(fep->hwp + FEC_IEVENT);
- writel(int_events, fep->hwp + FEC_IEVENT);
-
-+#ifdef CONFIG_FEC_1588
-+ if (__raw_readb(MCF_DTIM1_DTER) & MCF_DTIM_DTER_REF)
-+ __raw_writeb(MCF_DTIM_DTER_REF, MCF_DTIM1_DTER);
-+#endif
- if (int_events & FEC_ENET_RXF) {
- ret = IRQ_HANDLED;
- fec_enet_rx(dev);
-@@ -378,6 +411,19 @@ fec_enet_interrupt(int irq, void * dev_i
- fec_enet_tx(dev);
- }
-
-+#ifdef CONFIG_FEC_1588
-+ if (int_events & FEC_ENET_TS_AVAIL) {
-+ ret = IRQ_HANDLED;
-+ fec_ptp_store_txstamp(fep->ptp_priv);
-+ }
-+
-+ if (int_events & FEC_ENET_TS_TIMER) {
-+ ret = IRQ_HANDLED;
-+ if (fep->ptimer_present)
-+ fpp->prtc++;
-+ }
-+#endif
-+
- if (int_events & FEC_ENET_MII) {
- ret = IRQ_HANDLED;
- complete(&fep->mdio_done);
-@@ -394,6 +440,9 @@ fec_enet_tx(struct net_device *dev)
- struct fec_enet_private *fep;
- struct bufdesc *bdp;
- unsigned short status;
-+#ifdef CONFIG_FEC_1588
-+ unsigned long estatus;
-+#endif
- struct sk_buff *skb;
-
- fep = netdev_priv(dev);
-@@ -437,6 +486,13 @@ fec_enet_tx(struct net_device *dev)
- if (status & BD_ENET_TX_DEF)
- dev->stats.collisions++;
-
-+#if defined(CONFIG_FEC_1588)
-+ if (fep->ptimer_present) {
-+ estatus = bdp->cbd_esc;
-+ if (estatus & BD_ENET_TX_TS)
-+ fec_ptp_store_txstamp(fep->ptp_priv);
-+ }
-+#endif
- /* Free the sk buffer associated with this last transmit */
- dev_kfree_skb_any(skb);
- fep->tx_skbuff[fep->skb_dirty] = NULL;
-@@ -470,6 +526,9 @@ static void
- fec_enet_rx(struct net_device *dev)
- {
- struct fec_enet_private *fep = netdev_priv(dev);
-+#ifdef CONFIG_FEC_1588
-+ struct fec_ptp_private *fpp = fep->ptp_priv;
-+#endif
- const struct platform_device_id *id_entry =
- platform_get_device_id(fep->pdev);
- struct bufdesc *bdp;
-@@ -554,6 +613,12 @@ fec_enet_rx(struct net_device *dev)
- skb_put(skb, pkt_len - 4); /* Make room */
- skb_copy_to_linear_data(skb, data, pkt_len - 4);
- skb->protocol = eth_type_trans(skb, dev);
-+
-+#ifdef CONFIG_FEC_1588
-+ /* 1588 messeage TS handle */
-+ if (fep->ptimer_present)
-+ fec_ptp_store_rxstamp(fpp, skb, bdp);
-+#endif
- netif_rx(skb);
- }
-
-@@ -567,6 +632,11 @@ rx_processing_done:
- status |= BD_ENET_RX_EMPTY;
- bdp->cbd_sc = status;
-
-+#ifdef CONFIG_FEC_1588
-+ bdp->cbd_esc = BD_ENET_RX_INT;
-+ bdp->cbd_prot = 0;
-+ bdp->cbd_bdu = 0;
-+#endif
- /* Update BD pointer to next entry */
- if (status & BD_ENET_RX_WRAP)
- bdp = fep->rx_bd_base;
-@@ -669,8 +739,11 @@ static void fec_enet_adjust_link(struct
- fec_stop(dev);
-
- if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
-- writel(2, fep->hwp + FEC_ECNTRL);
--
-+#ifdef CONFIG_FEC_1588
-+ writel(0x00000012, fep->hwp + FEC_ECNTRL);
-+#else
-+ writel(0x00000002, fep->hwp + FEC_ECNTRL);
-+#endif
- status_change = 1;
- }
-
-@@ -983,6 +1056,10 @@ static int fec_enet_alloc_buffers(struct
- bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
- FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
- bdp->cbd_sc = BD_ENET_RX_EMPTY;
-+
-+#ifdef CONFIG_FEC_1588
-+ bdp->cbd_esc = BD_ENET_RX_INT;
-+#endif
- bdp++;
- }
-
-@@ -996,6 +1073,9 @@ static int fec_enet_alloc_buffers(struct
-
- bdp->cbd_sc = 0;
- bdp->cbd_bufaddr = 0;
-+#ifdef CONFIG_FEC_1588
-+ bdp->cbd_esc = BD_ENET_TX_INT;
-+#endif
- bdp++;
- }
-
-@@ -1256,8 +1336,12 @@ fec_restart(struct net_device *dev, int
- writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
- }
-
-+#ifdef CONFIG_FEC_1588
-+ writel(0x7fff8000, fep->hwp + FEC_IEVENT);
-+#else
- /* Clear any outstanding interrupt. */
- writel(0xffc00000, fep->hwp + FEC_IEVENT);
-+#endif
-
- /* Reset all multicast. */
- writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-@@ -1342,8 +1426,25 @@ fec_restart(struct net_device *dev, int
- #endif
- }
-
-+#ifdef CONFIG_FEC_1588
-+ if (fep->ptimer_present) {
-+ int ret;
-+ /* Set Timer count */
-+ ret = fec_ptp_start(fep->ptp_priv);
-+ if (ret) {
-+ fep->ptimer_present = 0;
-+ writel(2, fep->hwp + FEC_ECNTRL);
-+ } else {
-+ val = readl(fep->hwp + FEC_ECNTRL);
-+ val |= 0x00000012;
-+ writel(val, fep->hwp + FEC_ECNTRL);
-+ }
-+ } else
-+ writel(2, fep->hwp + FEC_ECNTRL);
-+#else
- /* And last, enable the transmit and receive processing */
- writel(2, fep->hwp + FEC_ECNTRL);
-+#endif
- writel(0, fep->hwp + FEC_R_DES_ACTIVE);
-
- /* Enable interrupts we wish to service */
-@@ -1367,6 +1468,10 @@ fec_stop(struct net_device *dev)
- writel(1, fep->hwp + FEC_ECNTRL);
- udelay(10);
- writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
-+#ifdef CONFIG_FEC_1588
-+ if (fep->ptimer_present)
-+ fec_ptp_stop(fep->ptp_priv);
-+#endif
- writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
- }
-
-@@ -1428,6 +1533,24 @@ fec_probe(struct platform_device *pdev)
- }
- }
-
-+#ifdef CONFIG_FEC_1588
-+ i = (pdev->id) ? (64 + 64 + 64 + 7) : (64 + 64 + 64);
-+ if (request_irq(i + 48, fec_enet_interrupt, IRQF_DISABLED,
-+ "1588 TS AVAIL", ndev) != 0)
-+ printk(KERN_ERR "FEC: Could not alloc FEC %x 1588 TS AVAIL "
-+ "IRQ(%d)!\n", pdev->id, i + 48);
-+
-+ if (pdev->id == 0) {
-+ printk("setup TS timer interrupt through DMA timer1\n");
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM1_DTMR);
-+
-+ if (request_irq(64 + 33, fec_enet_interrupt, IRQF_DISABLED,
-+ "1588 TS TIMER", ndev) != 0)
-+ printk(KERN_ERR "FEC: Could not alloc FEC %x 1588 TS"
-+ " TIMER IRQ(%d)!\n", pdev->id, 64 + 33);
-+ }
-+#endif
-+
- fep->clk = clk_get(&pdev->dev, "fec_clk");
- if (IS_ERR(fep->clk)) {
- ret = PTR_ERR(fep->clk);
-@@ -1443,6 +1566,20 @@ fec_probe(struct platform_device *pdev)
- if (ret)
- goto failed_mii_init;
-
-+#ifdef CONFIG_FEC_1588
-+ fep->ptp_priv = kzalloc(sizeof(struct fec_ptp_private),
-+ GFP_KERNEL);
-+ if (fep->ptp_priv) {
-+ fep->ptp_priv->hwp = fep->hwp;
-+ ret = fec_ptp_init(fep->ptp_priv, pdev->id);
-+ if (ret)
-+ printk(KERN_ERR "IEEE1588: ptp-timer init failed\n");
-+ else
-+ fep->ptimer_present = 1;
-+ } else
-+ printk(KERN_ERR "IEEE1588: failed to malloc memory\n");
-+#endif
-+
- /* Carrier starts down, phylib will bring it up */
- netif_carrier_off(ndev);
-
-@@ -1454,6 +1591,12 @@ fec_probe(struct platform_device *pdev)
-
- failed_register:
- fec_enet_mii_remove(fep);
-+#ifdef CONFIG_FEC_1588
-+ if (fep->ptimer_present)
-+ fec_ptp_cleanup(fep->ptp_priv);
-+
-+ kfree(fep->ptp_priv);
-+#endif
- failed_mii_init:
- failed_init:
- clk_disable(fep->clk);
-@@ -1485,6 +1628,12 @@ fec_drv_remove(struct platform_device *p
- clk_disable(fep->clk);
- clk_put(fep->clk);
- iounmap((void __iomem *)ndev->base_addr);
-+#ifdef CONFIG_FEC_1588
-+ if (fep->ptimer_present)
-+ fec_ptp_cleanup(fep->ptp_priv);
-+
-+ kfree(fep->ptp_priv);
-+#endif
- unregister_netdev(ndev);
- free_netdev(ndev);
- return 0;
---- a/drivers/net/fec.h
-+++ b/drivers/net/fec.h
-@@ -50,6 +50,16 @@
- #define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */
- #define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */
-
-+#if defined(CONFIG_FEC_1588)
-+#define FEC_ATIME_CTRL 0x400
-+#define FEC_ATIME 0x404
-+#define FEC_ATIME_EVT_OFFSET 0x408
-+#define FEC_ATIME_EVT_PERIOD 0x40c
-+#define FEC_ATIME_CORR 0x410
-+#define FEC_ATIME_INC 0x414
-+#define FEC_TS_TIMESTAMP 0x418
-+#endif
-+
- #else
-
- #define FEC_ECNTRL 0x000 /* Ethernet control reg */
-@@ -78,6 +88,9 @@
-
- #endif /* CONFIG_M5272 */
-
-+#if defined(CONFIG_FEC_1588)
-+#define FEC_ENHANCED_MODE 1
-+#endif
-
- /*
- * Define the buffer descriptor structure.
-@@ -93,6 +106,14 @@ struct bufdesc {
- unsigned short cbd_sc; /* Control and status info */
- unsigned short cbd_datlen; /* Data length */
- unsigned long cbd_bufaddr; /* Buffer address */
-+
-+#ifdef FEC_ENHANCED_MODE
-+ unsigned long cbd_esc;
-+ unsigned long cbd_prot;
-+ unsigned long cbd_bdu;
-+ unsigned long ts;
-+ unsigned short res0[4];
-+#endif
- };
- #endif
-
-@@ -128,6 +149,7 @@ struct bufdesc {
- #define BD_ENET_RX_OV ((ushort)0x0002)
- #define BD_ENET_RX_CL ((ushort)0x0001)
- #define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
-+#define BD_ENET_RX_INT 0x00800000
-
- /* Buffer descriptor control/status used by Ethernet transmit.
- */
-@@ -146,6 +168,9 @@ struct bufdesc {
- #define BD_ENET_TX_CSL ((ushort)0x0001)
- #define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-+#define BD_ENET_TX_TS 0x20000000
-+#define BD_ENET_TX_INT 0x40000000
-+#define BD_ENET_TX_BDU 0x80000000
-
- /****************************************************************************/
- #endif /* FEC_H */
---- /dev/null
-+++ b/drivers/net/fec_1588.c
-@@ -0,0 +1,626 @@
-+/*
-+ * drivers/net/fec_1588.c
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Copyright (C) 2009 IXXAT Automation, GmbH
-+ *
-+ * FEC Ethernet Driver -- IEEE 1588 interface functionality
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ *
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/device.h>
-+#include <linux/fs.h>
-+#include <linux/vmalloc.h>
-+#include <linux/spinlock.h>
-+#include <linux/ip.h>
-+#include <linux/udp.h>
-+#include <asm/mcf5441x_ccm.h>
-+#include <asm/mcf5441x_dtim.h>
-+#include <asm/mcfsim.h>
-+#include "fec_1588.h"
-+
-+static DECLARE_WAIT_QUEUE_HEAD(ptp_rx_ts_wait);
-+#define PTP_GET_RX_TIMEOUT (HZ/10)
-+#define COLDFIRE_DTIM1_INT (64+32+1)
-+
-+static struct fec_ptp_private *ptp_private[2];
-+
-+static void init_DTIM1_for_1588(struct fec_ptp_private *priv)
-+{
-+ printk(KERN_INFO "Initializing DTIM1 for 1588 TS timer\n");
-+
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM1_DTMR);
-+
-+ /*Enable 1588*/
-+
-+ __raw_writeb(MCF_DTIM_DTXMR_1588EN, MCF_DTIM1_DTXMR);
-+
-+ /*Compare to the 1588 timerbase*/
-+ __raw_writel(FEC_T_PERIOD_ONE_SEC - FEC_T_INC_40MHZ, MCF_DTIM1_DTRR);
-+
-+ __raw_writeb(MCF_DTIM_DTER_REF, MCF_DTIM1_DTER);
-+
-+ MCF_GPIO_PAR_TIMER = (MCF_GPIO_PAR_TIMER & MCF_GPIO_PAR_TIMER_T1IN_MASK)
-+ | MCF_GPIO_PAR_TIMER_T1IN_T1OUT;
-+}
-+
-+static void start_DTIM1(void)
-+{
-+ __raw_writew(MCF_DTIM_DTMR_RST_EN | MCF_DTIM_DTMR_ORRI |
-+ MCF_DTIM_DTMR_OM, MCF_DTIM1_DTMR);
-+}
-+
-+static void stop_DTIM1(void)
-+{
-+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM1_DTMR);
-+}
-+
-+/* Alloc the ring resource */
-+static int fec_ptp_init_circ(struct circ_buf *ptp_buf)
-+{
-+ ptp_buf->buf = vmalloc(DEFAULT_PTP_RX_BUF_SZ *
-+ sizeof(struct fec_ptp_data_t));
-+
-+ if (!ptp_buf->buf)
-+ return 1;
-+ ptp_buf->head = 0;
-+ ptp_buf->tail = 0;
-+
-+ return 0;
-+}
-+
-+static inline int fec_ptp_calc_index(int size, int curr_index, int offset)
-+{
-+ return (curr_index + offset) % size;
-+}
-+
-+static int fec_ptp_is_empty(struct circ_buf *buf)
-+{
-+ return (buf->head == buf->tail);
-+}
-+
-+static int fec_ptp_nelems(struct circ_buf *buf)
-+{
-+ const int front = buf->head;
-+ const int end = buf->tail;
-+ const int size = DEFAULT_PTP_RX_BUF_SZ;
-+ int n_items;
-+
-+ if (end > front)
-+ n_items = end - front;
-+ else if (end < front)
-+ n_items = size - (front - end);
-+ else
-+ n_items = 0;
-+
-+ return n_items;
-+}
-+
-+static int fec_ptp_is_full(struct circ_buf *buf)
-+{
-+ if (fec_ptp_nelems(buf) ==
-+ (DEFAULT_PTP_RX_BUF_SZ - 1))
-+ return 1;
-+ else
-+ return 0;
-+}
-+
-+static int fec_ptp_insert(struct circ_buf *ptp_buf,
-+ struct fec_ptp_data_t *data,
-+ struct fec_ptp_private *priv)
-+{
-+ struct fec_ptp_data_t *tmp;
-+
-+ if (fec_ptp_is_full(ptp_buf))
-+ return 1;
-+
-+ spin_lock(&priv->ptp_lock);
-+ tmp = (struct fec_ptp_data_t *)(ptp_buf->buf) + ptp_buf->tail;
-+
-+ tmp->key = data->key;
-+ tmp->ts_time.sec = data->ts_time.sec;
-+ tmp->ts_time.nsec = data->ts_time.nsec;
-+
-+ ptp_buf->tail = fec_ptp_calc_index(DEFAULT_PTP_RX_BUF_SZ,
-+ ptp_buf->tail, 1);
-+ spin_unlock(&priv->ptp_lock);
-+
-+ return 0;
-+}
-+
-+static int fec_ptp_find_and_remove(struct circ_buf *ptp_buf,
-+ int key,
-+ struct fec_ptp_data_t *data,
-+ struct fec_ptp_private *priv)
-+{
-+ int i;
-+ int size = DEFAULT_PTP_RX_BUF_SZ;
-+ int end = ptp_buf->tail;
-+ unsigned long flags;
-+ struct fec_ptp_data_t *tmp;
-+
-+ if (fec_ptp_is_empty(ptp_buf))
-+ return 1;
-+
-+ i = ptp_buf->head;
-+ while (i != end) {
-+ tmp = (struct fec_ptp_data_t *)(ptp_buf->buf) + i;
-+ if (tmp->key == key)
-+ break;
-+ i = fec_ptp_calc_index(size, i, 1);
-+ }
-+
-+ spin_lock_irqsave(&priv->ptp_lock, flags);
-+ if (i == end) {
-+ ptp_buf->head = end;
-+ spin_unlock_irqrestore(&priv->ptp_lock, flags);
-+ return 1;
-+ }
-+
-+ data->ts_time.sec = tmp->ts_time.sec;
-+ data->ts_time.nsec = tmp->ts_time.nsec;
-+
-+ ptp_buf->head = fec_ptp_calc_index(size, i, 1);
-+ spin_unlock_irqrestore(&priv->ptp_lock, flags);
-+
-+ return 0;
-+}
-+
-+/* 1588 Module intialization */
-+int fec_ptp_start(struct fec_ptp_private *priv)
-+{
-+ struct fec_ptp_private *fpp = priv;
-+
-+ MCF_CCM_MISCCR3 = 0x0000;
-+
-+ init_DTIM1_for_1588(priv);
-+
-+ /* Select 1588 Timer source and enable module for starting Tmr Clock */
-+ fec_writel(FEC_T_CTRL_RESTART, fpp->hwp + FEC_ATIME_CTRL);
-+ fec_writel(FEC_T_INC_40MHZ << FEC_T_INC_OFFSET,
-+ fpp->hwp + FEC_ATIME_INC);
-+ fec_writel(FEC_T_PERIOD_ONE_SEC, fpp->hwp + FEC_ATIME_EVT_PERIOD);
-+ /* start counter */
-+ fec_writel(FEC_T_CTRL_PERIOD_RST | FEC_T_CTRL_ENABLE |
-+ FEC_T_CTRL_PINPER, fpp->hwp + FEC_ATIME_CTRL);
-+
-+ start_DTIM1();
-+
-+ return 0;
-+}
-+
-+/* Cleanup routine for 1588 module.
-+ * When PTP is disabled this routing is called */
-+void fec_ptp_stop(struct fec_ptp_private *priv)
-+{
-+ struct fec_ptp_private *fpp = priv;
-+
-+ fec_writel(0, fpp->hwp + FEC_ATIME_CTRL);
-+ fec_writel(FEC_T_CTRL_RESTART, fpp->hwp + FEC_ATIME_CTRL);
-+ stop_DTIM1();
-+}
-+
-+static void fec_get_curr_cnt(struct fec_ptp_private *priv,
-+ struct ptp_rtc_time *curr_time)
-+{
-+ u32 tempval;
-+
-+ fec_writel(FEC_T_CTRL_CAPTURE, priv->hwp + FEC_ATIME_CTRL);
-+ fec_writel(FEC_T_CTRL_CAPTURE, priv->hwp + FEC_ATIME_CTRL);
-+ curr_time->rtc_time.nsec = fec_readl(priv->hwp + FEC_ATIME);
-+ curr_time->rtc_time.sec = priv->prtc;
-+
-+ fec_writel(FEC_T_CTRL_CAPTURE, priv->hwp + FEC_ATIME_CTRL);
-+ tempval = fec_readl(priv->hwp + FEC_ATIME);
-+ if (tempval < curr_time->rtc_time.nsec) {
-+ curr_time->rtc_time.nsec = tempval;
-+ curr_time->rtc_time.sec = priv->prtc;
-+ }
-+}
-+
-+/* Set the 1588 timer counter registers */
-+static void fec_set_1588cnt(struct fec_ptp_private *priv,
-+ struct ptp_rtc_time *fec_time)
-+{
-+ u32 tempval;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->cnt_lock, flags);
-+
-+ priv->prtc = fec_time->rtc_time.sec;
-+
-+ tempval = fec_time->rtc_time.nsec;
-+ fec_writel(tempval, priv->hwp + FEC_ATIME);
-+ spin_unlock_irqrestore(&priv->cnt_lock, flags);
-+}
-+
-+/* Set the BD to ptp */
-+int fec_ptp_do_txstamp(struct sk_buff *skb)
-+{
-+ struct iphdr *iph;
-+ struct udphdr *udph;
-+
-+ if (skb->len > 44) {
-+ /* Check if port is 319 for PTP Event, and check for UDP */
-+ iph = ip_hdr(skb);
-+ if (iph == NULL || iph->protocol != FEC_PACKET_TYPE_UDP)
-+ return 0;
-+
-+ udph = udp_hdr(skb);
-+ if (udph != NULL && ntohs(udph->source) == 319)
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+void fec_ptp_store_txstamp(struct fec_ptp_private *priv)
-+{
-+ struct fec_ptp_private *fpp = priv;
-+ unsigned int reg;
-+
-+ reg = fec_readl(fpp->hwp + FEC_TS_TIMESTAMP);
-+ fpp->txstamp.nsec = reg;
-+ fpp->txstamp.sec = fpp->prtc;
-+}
-+
-+void fec_ptp_store_rxstamp(struct fec_ptp_private *priv,
-+ struct sk_buff *skb,
-+ struct bufdesc *bdp)
-+{
-+ int msg_type, seq_id, control;
-+ struct fec_ptp_data_t tmp_rx_time;
-+ struct fec_ptp_private *fpp = priv;
-+ struct iphdr *iph;
-+ struct udphdr *udph;
-+
-+ /* Check for UDP, and Check if port is 319 for PTP Event */
-+ iph = (struct iphdr *)(skb->data + FEC_PTP_IP_OFFS);
-+ if (iph->protocol != FEC_PACKET_TYPE_UDP)
-+ return;
-+
-+ udph = (struct udphdr *)(skb->data + FEC_PTP_UDP_OFFS);
-+ if (ntohs(udph->source) != 319)
-+ return;
-+
-+ seq_id = *((u16 *)(skb->data + FEC_PTP_SEQ_ID_OFFS));
-+ control = *((u8 *)(skb->data + FEC_PTP_CTRL_OFFS));
-+
-+ tmp_rx_time.key = ntohs(seq_id);
-+ tmp_rx_time.ts_time.sec = fpp->prtc;
-+ tmp_rx_time.ts_time.nsec = bdp->ts;
-+
-+ switch (control) {
-+
-+ case PTP_MSG_SYNC:
-+ fec_ptp_insert(&(priv->rx_time_sync), &tmp_rx_time, priv);
-+ break;
-+
-+ case PTP_MSG_DEL_REQ:
-+ fec_ptp_insert(&(priv->rx_time_del_req), &tmp_rx_time, priv);
-+ break;
-+
-+ /* clear transportSpecific field*/
-+ case PTP_MSG_ALL_OTHER:
-+ msg_type = (*((u8 *)(skb->data +
-+ FEC_PTP_MSG_TYPE_OFFS))) & 0x0F;
-+ switch (msg_type) {
-+ case PTP_MSG_P_DEL_REQ:
-+ fec_ptp_insert(&(priv->rx_time_pdel_req),
-+ &tmp_rx_time, priv);
-+ break;
-+ case PTP_MSG_P_DEL_RESP:
-+ fec_ptp_insert(&(priv->rx_time_pdel_resp),
-+ &tmp_rx_time, priv);
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ wake_up_interruptible(&ptp_rx_ts_wait);
-+}
-+
-+static void fec_get_tx_timestamp(struct fec_ptp_private *priv,
-+ struct ptp_time *tx_time)
-+{
-+ tx_time->sec = priv->txstamp.sec;
-+ tx_time->nsec = priv->txstamp.nsec;
-+}
-+
-+static uint8_t fec_get_rx_time(struct fec_ptp_private *priv,
-+ struct ptp_ts_data *pts,
-+ struct ptp_time *rx_time)
-+{
-+ struct fec_ptp_data_t tmp;
-+ int key, flag;
-+ u8 mode;
-+
-+ key = pts->seq_id;
-+ mode = pts->message_type;
-+ switch (mode) {
-+ case PTP_MSG_SYNC:
-+ flag = fec_ptp_find_and_remove(&(priv->rx_time_sync),
-+ key, &tmp, priv);
-+ break;
-+ case PTP_MSG_DEL_REQ:
-+ flag = fec_ptp_find_and_remove(&(priv->rx_time_del_req),
-+ key, &tmp, priv);
-+ break;
-+
-+ case PTP_MSG_P_DEL_REQ:
-+ flag = fec_ptp_find_and_remove(&(priv->rx_time_pdel_req),
-+ key, &tmp, priv);
-+ break;
-+ case PTP_MSG_P_DEL_RESP:
-+ flag = fec_ptp_find_and_remove(&(priv->rx_time_pdel_resp),
-+ key, &tmp, priv);
-+ break;
-+
-+ default:
-+ flag = 1;
-+ printk(KERN_ERR "ERROR\n");
-+ break;
-+ }
-+
-+ if (!flag) {
-+ rx_time->sec = tmp.ts_time.sec;
-+ rx_time->nsec = tmp.ts_time.nsec;
-+ return 0;
-+ } else {
-+ wait_event_interruptible_timeout(ptp_rx_ts_wait, 0,
-+ PTP_GET_RX_TIMEOUT);
-+
-+ switch (mode) {
-+ case PTP_MSG_SYNC:
-+ flag = fec_ptp_find_and_remove(&(priv->rx_time_sync),
-+ key, &tmp, priv);
-+ break;
-+ case PTP_MSG_DEL_REQ:
-+ flag = fec_ptp_find_and_remove(
-+ &(priv->rx_time_del_req), key, &tmp, priv);
-+ break;
-+ case PTP_MSG_P_DEL_REQ:
-+ flag = fec_ptp_find_and_remove(
-+ &(priv->rx_time_pdel_req), key, &tmp, priv);
-+ break;
-+ case PTP_MSG_P_DEL_RESP:
-+ flag = fec_ptp_find_and_remove(
-+ &(priv->rx_time_pdel_resp), key, &tmp, priv);
-+ break;
-+ }
-+
-+ if (flag == 0) {
-+ rx_time->sec = tmp.ts_time.sec;
-+ rx_time->nsec = tmp.ts_time.nsec;
-+ return 0;
-+ }
-+
-+ return -1;
-+ }
-+}
-+
-+static void fec_handle_ptpdrift(
-+ struct ptp_set_comp *comp,
-+ struct ptp_time_correct *ptc)
-+{
-+ u32 ndrift;
-+ u32 i;
-+ u32 tmp, tmp_ns, tmp_prid;
-+ u32 min_ns, min_prid, miss_ns;
-+
-+ ndrift = comp->drift;
-+ if (ndrift == 0) {
-+ ptc->corr_inc = 0;
-+ ptc->corr_period = 0;
-+ return;
-+ }
-+
-+ if (ndrift >= FEC_ATIME_40MHZ) {
-+ ptc->corr_inc = (u32)(ndrift / FEC_ATIME_40MHZ);
-+ ptc->corr_period = 1;
-+ return;
-+ }
-+
-+ min_ns = 1;
-+ tmp = FEC_ATIME_40MHZ % ndrift;
-+ tmp_prid = (u32)(FEC_ATIME_40MHZ / ndrift);
-+ min_prid = tmp_prid;
-+ miss_ns = tmp / tmp_prid;
-+ for (i = 2; i <= FEC_T_INC_40MHZ; i++) {
-+ tmp = (FEC_ATIME_40MHZ * i) % ndrift;
-+ tmp_prid = (FEC_ATIME_40MHZ * i) / ndrift;
-+ tmp_ns = tmp / tmp_prid;
-+ if (tmp_ns <= 10) {
-+ min_ns = i;
-+ min_prid = tmp_prid;
-+ break;
-+ }
-+
-+ if (tmp_ns < miss_ns) {
-+ min_ns = i;
-+ min_prid = tmp_prid;
-+ miss_ns = tmp_ns;
-+ }
-+ }
-+
-+ ptc->corr_inc = min_ns;
-+ ptc->corr_period = min_prid;
-+}
-+
-+static void fec_set_drift(struct fec_ptp_private *priv,
-+ struct ptp_set_comp *comp)
-+{
-+ struct ptp_time_correct tc;
-+ struct fec_ptp_private *fpp = priv;
-+ u32 tmp, corr_ns;
-+
-+ fec_handle_ptpdrift(comp, &tc);
-+ if (tc.corr_inc == 0)
-+ return;
-+
-+ if (comp->o_ops == TRUE)
-+ corr_ns = FEC_T_INC_40MHZ + tc.corr_inc;
-+ else
-+ corr_ns = FEC_T_INC_40MHZ - tc.corr_inc;
-+
-+ tmp = fec_readl(fpp->hwp + FEC_ATIME_INC) & FEC_T_INC_MASK;
-+ tmp |= corr_ns << FEC_T_INC_CORR_OFFSET;
-+ fec_writel(tmp, fpp->hwp + FEC_ATIME_INC);
-+
-+ fec_writel(tc.corr_period, fpp->hwp + FEC_ATIME_CORR);
-+}
-+
-+static int ptp_open(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+static int ptp_release(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+static long ptp_unlocked_ioctl(
-+ struct file *file,
-+ unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct ptp_rtc_time *cnt;
-+ struct ptp_rtc_time curr_time;
-+ struct ptp_time rx_time, tx_time;
-+ struct ptp_ts_data *p_ts;
-+ struct ptp_set_comp *p_comp;
-+ struct fec_ptp_private *priv;
-+ struct inode *inode = file->f_mapping->host;
-+ unsigned int minor = MINOR(inode->i_rdev);
-+ long retval = 0;
-+
-+ priv = (struct fec_ptp_private *) ptp_private[minor];
-+ switch (cmd) {
-+ case PTP_GET_RX_TIMESTAMP:
-+ p_ts = (struct ptp_ts_data *)arg;
-+ retval = fec_get_rx_time(priv, p_ts, &rx_time);
-+ if (retval == 0)
-+ copy_to_user((void __user *)(&(p_ts->ts)), &rx_time,
-+ sizeof(rx_time));
-+ break;
-+ case PTP_GET_TX_TIMESTAMP:
-+ p_ts = (struct ptp_ts_data *)arg;
-+ fec_get_tx_timestamp(priv, &tx_time);
-+ copy_to_user((void __user *)(&(p_ts->ts)), &tx_time,
-+ sizeof(tx_time));
-+ break;
-+ case PTP_GET_CURRENT_TIME:
-+ fec_get_curr_cnt(priv, &curr_time);
-+ copy_to_user((void __user *)arg, &curr_time, sizeof(curr_time));
-+ break;
-+ case PTP_SET_RTC_TIME:
-+ cnt = (struct ptp_rtc_time *)arg;
-+ fec_set_1588cnt(priv, cnt);
-+ break;
-+ case PTP_FLUSH_TIMESTAMP:
-+ /* reset sync buffer */
-+ priv->rx_time_sync.head = 0;
-+ priv->rx_time_sync.tail = 0;
-+ /* reset delay_req buffer */
-+ priv->rx_time_del_req.head = 0;
-+ priv->rx_time_del_req.tail = 0;
-+ /* reset pdelay_req buffer */
-+ priv->rx_time_pdel_req.head = 0;
-+ priv->rx_time_pdel_req.tail = 0;
-+ /* reset pdelay_resp buffer */
-+ priv->rx_time_pdel_resp.head = 0;
-+ priv->rx_time_pdel_resp.tail = 0;
-+ break;
-+ case PTP_SET_COMPENSATION:
-+ p_comp = (struct ptp_set_comp *)arg;
-+ fec_set_drift(priv, p_comp);
-+ break;
-+ case PTP_GET_ORIG_COMP:
-+ ((struct ptp_get_comp *)arg)->dw_origcomp = FEC_PTP_ORIG_COMP;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ return retval;
-+}
-+
-+static const struct file_operations ptp_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = NULL,
-+ .read = NULL,
-+ .write = NULL,
-+ .unlocked_ioctl = ptp_unlocked_ioctl,
-+ .open = ptp_open,
-+ .release = ptp_release,
-+};
-+
-+static int init_ptp(void)
-+{
-+ if (register_chrdev(PTP_MAJOR, "ptp", &ptp_fops))
-+ printk(KERN_ERR "Unable to register PTP deivce as char\n");
-+
-+ return 0;
-+}
-+
-+static void ptp_free(void)
-+{
-+ /*unregister the PTP device*/
-+ unregister_chrdev(PTP_MAJOR, "ptp");
-+}
-+
-+
-+
-+/*
-+ * Resource required for accessing 1588 Timer Registers.
-+ */
-+int fec_ptp_init(struct fec_ptp_private *priv, int id)
-+{
-+ fec_ptp_init_circ(&(priv->rx_time_sync));
-+ fec_ptp_init_circ(&(priv->rx_time_del_req));
-+ fec_ptp_init_circ(&(priv->rx_time_pdel_req));
-+ fec_ptp_init_circ(&(priv->rx_time_pdel_resp));
-+
-+ spin_lock_init(&priv->ptp_lock);
-+ spin_lock_init(&priv->cnt_lock);
-+ ptp_private[id] = priv;
-+ if (id == 0)
-+ init_ptp();
-+ return 0;
-+}
-+EXPORT_SYMBOL(fec_ptp_init);
-+
-+void fec_ptp_cleanup(struct fec_ptp_private *priv)
-+{
-+
-+ if (priv->rx_time_sync.buf)
-+ vfree(priv->rx_time_sync.buf);
-+ if (priv->rx_time_del_req.buf)
-+ vfree(priv->rx_time_del_req.buf);
-+ if (priv->rx_time_pdel_req.buf)
-+ vfree(priv->rx_time_pdel_req.buf);
-+ if (priv->rx_time_pdel_resp.buf)
-+ vfree(priv->rx_time_pdel_resp.buf);
-+
-+ ptp_free();
-+}
-+EXPORT_SYMBOL(fec_ptp_cleanup);
---- /dev/null
-+++ b/drivers/net/fec_1588.h
-@@ -0,0 +1,195 @@
-+/*
-+ * drivers/net/fec_1588.h
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ *
-+ */
-+
-+#ifndef FEC_1588_H
-+#define FEC_1588_H
-+
-+#include <linux/circ_buf.h>
-+#include "fec.h"
-+
-+#define fec_readl(addr) \
-+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-+
-+#define fec_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-+
-+#define FALSE 0
-+#define TRUE 1
-+
-+/* FEC 1588 register bits */
-+#define FEC_T_CTRL_CAPTURE 0x00000800
-+#define FEC_T_CTRL_RESTART 0x00000200
-+#define FEC_T_CTRL_PERIOD_RST 0x00000010
-+#define FEC_T_CTRL_PINPER 0x00000080
-+#define FEC_T_CTRL_ENABLE 0x00000001
-+
-+#define FEC_T_INC_MASK 0x0000007f
-+#define FEC_T_INC_OFFSET 0
-+#define FEC_T_INC_CORR_MASK 0x00007f00
-+#define FEC_T_INC_CORR_OFFSET 8
-+
-+#define FEC_T_INC_40MHZ 8
-+#define FEC_ATIME_40MHZ 125000000
-+
-+#define FEC_T_PERIOD_ONE_SEC 0x3B9ACA00
-+
-+/* IEEE 1588 definition */
-+#define FEC_ECNTRL_TS_EN 0x10
-+#define PTP_MAJOR 232 /*the temporary major number
-+ *used by PTP driver, the major
-+ *number 232~239 is unassigned*/
-+
-+#define DEFAULT_PTP_RX_BUF_SZ 2048
-+#define PTP_MSG_SYNC 0x0
-+#define PTP_MSG_DEL_REQ 0x1
-+#define PTP_MSG_P_DEL_REQ 0x2
-+#define PTP_MSG_P_DEL_RESP 0x3
-+#define PTP_MSG_DEL_RESP 0x4
-+#define PTP_MSG_ALL_OTHER 0x5
-+
-+#define PTP_GET_TX_TIMESTAMP 0x1
-+#define PTP_GET_RX_TIMESTAMP 0x9
-+#define PTP_SET_RTC_TIME 0x3
-+#define PTP_SET_COMPENSATION 0x4
-+#define PTP_GET_CURRENT_TIME 0x5
-+#define PTP_FLUSH_TIMESTAMP 0x6
-+#define PTP_ADJ_ADDEND 0x7
-+#define PTP_GET_ORIG_COMP 0x8
-+#define PTP_GET_ADDEND 0xB
-+#define PTP_GET_RX_TIMESTAMP_PDELAY_REQ 0xC
-+#define PTP_GET_RX_TIMESTAMP_PDELAY_RESP 0xD
-+
-+#define FEC_PTP_DOMAIN_DLFT 0xe0000181
-+#define FEC_PTP_IP_OFFS 0x0
-+#define FEC_PTP_UDP_OFFS 0x14
-+#define FEC_PTP_MSG_TYPE_OFFS 0x1C
-+#define FEC_PTP_SEQ_ID_OFFS 0x3A
-+#define FEC_PTP_COR_NS 0x24
-+#define FEC_PTP_CTRL_OFFS 0x3C
-+#define FEC_PACKET_TYPE_UDP 0x11
-+
-+#define FEC_PTP_ORIG_COMP 0x15555
-+
-+/* PTP standard time representation structure */
-+struct ptp_time {
-+ u64 sec; /* seconds */
-+ u32 nsec; /* nanoseconds */
-+};
-+
-+/* Structure for PTP Time Stamp */
-+struct fec_ptp_data_t {
-+ int key;
-+ struct ptp_time ts_time;
-+};
-+
-+/* interface for PTP driver command GET_TX_TIME */
-+struct ptp_ts_data {
-+ /* PTP version */
-+ u8 version;
-+ /* PTP source port ID */
-+ u8 spid[10];
-+ /* PTP sequence ID */
-+ u16 seq_id;
-+ /* PTP message type */
-+ u8 message_type;
-+ /* PTP timestamp */
-+ struct ptp_time ts;
-+};
-+
-+/* interface for PTP driver command SET_RTC_TIME/GET_CURRENT_TIME */
-+struct ptp_rtc_time {
-+ struct ptp_time rtc_time;
-+};
-+
-+/* interface for PTP driver command SET_COMPENSATION */
-+struct ptp_set_comp {
-+ u32 drift;
-+ u32 o_ops;
-+};
-+
-+/* interface for PTP driver command GET_ORIG_COMP */
-+struct ptp_get_comp {
-+ /* the initial compensation value */
-+ u32 dw_origcomp;
-+ /* the minimum compensation value */
-+ u32 dw_mincomp;
-+ /*the max compensation value*/
-+ u32 dw_maxcomp;
-+ /*the min drift applying min compensation value in ppm*/
-+ u32 dw_mindrift;
-+ /*the max drift applying max compensation value in ppm*/
-+ u32 dw_maxdrift;
-+};
-+
-+struct ptp_time_correct {
-+ u32 corr_period;
-+ u32 corr_inc;
-+};
-+
-+/* PTP message version */
-+#define PTP_1588_MSG_VER_1 1
-+#define PTP_1588_MSG_VER_2 2
-+
-+struct fec_ptp_private {
-+ void __iomem *hwp;
-+
-+ struct circ_buf rx_time_sync;
-+ struct circ_buf rx_time_del_req;
-+ struct circ_buf rx_time_pdel_req;
-+ struct circ_buf rx_time_pdel_resp;
-+ spinlock_t ptp_lock;
-+ spinlock_t cnt_lock;
-+
-+ u64 prtc;
-+ struct ptp_time txstamp;
-+};
-+
-+#ifdef CONFIG_FEC_1588
-+extern int fec_ptp_init(struct fec_ptp_private *priv, int id);
-+extern void fec_ptp_cleanup(struct fec_ptp_private *priv);
-+extern int fec_ptp_start(struct fec_ptp_private *priv);
-+extern void fec_ptp_stop(struct fec_ptp_private *priv);
-+extern int fec_ptp_do_txstamp(struct sk_buff *skb);
-+extern void fec_ptp_store_txstamp(struct fec_ptp_private *priv);
-+extern void fec_ptp_store_rxstamp(struct fec_ptp_private *priv,
-+ struct sk_buff *skb,
-+ struct bufdesc *bdp);
-+#else
-+static inline int fec_ptp_init(struct fec_ptp_private *priv, int id)
-+{
-+ return 1;
-+}
-+static inline void fec_ptp_cleanup(struct fec_ptp_private *priv) { }
-+static inline int fec_ptp_start(struct fec_ptp_private *priv)
-+{
-+ return 1;
-+}
-+static inline void fec_ptp_stop(struct fec_ptp_private *priv) {}
-+static inline int fec_ptp_do_txstamp(struct sk_buff *skb)
-+{
-+ return 0;
-+}
-+static inline void fec_ptp_store_txstamp(struct fec_ptp_private *priv) {}
-+static inline void fec_ptp_store_rxstamp(struct fec_ptp_private *priv,
-+ struct sk_buff *skb,
-+ struct bufdesc *bdp) {}
-+#endif /* 1588 */
-+
-+#endif
diff --git a/target/linux/coldfire/patches/021-Add-ethernet-switch-driver-for-MCF54418.patch b/target/linux/coldfire/patches/021-Add-ethernet-switch-driver-for-MCF54418.patch
deleted file mode 100644
index e5bbc69..0000000
--- a/target/linux/coldfire/patches/021-Add-ethernet-switch-driver-for-MCF54418.patch
+++ /dev/null
@@ -1,6152 +0,0 @@
-From 51e66f289f280a33bb17047717d2e6539a2917e1 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:44 +0800
-Subject: [PATCH 21/52] Add ethernet switch driver for MCF54418
-
-Add ethernet switch driver support for MCF54418.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5441x/l2switch.c | 284 +++
- arch/m68k/include/asm/mcfswitch.h | 324 +++
- drivers/net/Kconfig | 8 +
- drivers/net/Makefile | 1 +
- drivers/net/modelo_switch.c | 4293 ++++++++++++++++++++++++++++++++++
- drivers/net/modelo_switch.h | 1141 +++++++++
- include/linux/fsl_devices.h | 17 +
- net/core/dev.c | 8 +
- 8 files changed, 6076 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/coldfire/m5441x/l2switch.c
- create mode 100644 arch/m68k/include/asm/mcfswitch.h
- create mode 100644 drivers/net/modelo_switch.c
- create mode 100644 drivers/net/modelo_switch.h
-
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/l2switch.c
-@@ -0,0 +1,284 @@
-+/*
-+ * l2switch.c
-+ *
-+ * Sub-architcture dependant initialization code for the Freescale
-+ * 5441X L2 Switch module.
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * ShrekWu B16972@freescale.com
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/param.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+
-+#include <asm/traps.h>
-+#include <asm/machdep.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfswitch.h>
-+#include <asm/mcfsim.h>
-+
-+static unsigned char switch_mac_default[] = {
-+ 0x00, 0x04, 0x9F, 0x00, 0xB3, 0x49,
-+};
-+
-+static unsigned char switch_mac_addr[6];
-+
-+static void switch_request_intrs(struct net_device *dev,
-+ irqreturn_t switch_net_irq_handler(int irq, void *private),
-+ void *irq_privatedata)
-+{
-+ struct switch_enet_private *fep;
-+ int b;
-+ static const struct idesc {
-+ char *name;
-+ unsigned short irq;
-+ } *idp, id[] = {
-+ /*{ "esw_isr(EBERR)", 38 },*/
-+ { "esw_isr(RxBuffer)", 39 },
-+ { "esw_isr(RxFrame)", 40 },
-+ { "esw_isr(TxBuffer)", 41 },
-+ { "esw_isr(TxFrame)", 42 },
-+ { "esw_isr(QM)", 43 },
-+ { "esw_isr(P0OutputDiscard)", 44 },
-+ { "esw_isr(P1OutputDiscard)", 45 },
-+ { "esw_isr(P2OutputDiscard)", 46 },
-+ { "esw_isr(LearningRecord)", 47 },
-+ { NULL },
-+ };
-+
-+ fep = netdev_priv(dev);
-+ /*intrruption L2 ethernet SWITCH */
-+ b = 64 + 64 + 64;
-+
-+ /* Setup interrupt handlers. */
-+ for (idp = id; idp->name; idp++) {
-+ if (request_irq(b+idp->irq,
-+ switch_net_irq_handler, IRQF_DISABLED,
-+ idp->name, irq_privatedata) != 0)
-+ printk(KERN_ERR "FEC: Could not alloc %s IRQ(%d)!\n",
-+ idp->name, b+idp->irq);
-+ }
-+
-+ /* Configure RMII */
-+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC_RMII0FUL_1FUL;
-+
-+ MCF_GPIO_PAR_FEC =
-+ (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC_RMII0FUL_1FUL;
-+
-+ MCF_GPIO_SRCR_FEC = 0x0F;
-+
-+ MCF_GPIO_PAR_SIMP0H =
-+ (MCF_GPIO_PAR_SIMP0H &
-+ MCF_GPIO_PAR_SIMP0H_DAT_MASK) |
-+ MCF_GPIO_PAR_SIMP0H_DAT_GPIO;
-+
-+ MCF_GPIO_PDDR_G =
-+ (MCF_GPIO_PDDR_G &
-+ MCF_GPIO_PDDR_G4_MASK) |
-+ MCF_GPIO_PDDR_G4_OUTPUT;
-+
-+ MCF_GPIO_PODR_G =
-+ (MCF_GPIO_PODR_G &
-+ MCF_GPIO_PODR_G4_MASK);
-+}
-+
-+static void switch_set_mii(struct net_device *dev)
-+{
-+ struct switch_enet_private *fep = netdev_priv(dev);
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ MCF_FEC_RCR0 = (MCF_FEC_RCR_PROM | MCF_FEC_RCR_RMII_MODE |
-+ MCF_FEC_RCR_MAX_FL(1522) | MCF_FEC_RCR_CRC_FWD);
-+ MCF_FEC_RCR1 = (MCF_FEC_RCR_PROM | MCF_FEC_RCR_RMII_MODE |
-+ MCF_FEC_RCR_MAX_FL(1522) | MCF_FEC_RCR_CRC_FWD);
-+ /* TCR */
-+ MCF_FEC_TCR0 = MCF_FEC_TCR_FDEN;
-+ MCF_FEC_TCR1 = MCF_FEC_TCR_FDEN;
-+ /* ECR */
-+#ifdef MODELO_ENHANCE_BUFFER
-+ MCF_FEC_ECR0 = MCF_FEC_ECR_ETHER_EN | MCF_FEC_ECR_ENA_1588;
-+ MCF_FEC_ECR1 = MCF_FEC_ECR_ETHER_EN | MCF_FEC_ECR_ENA_1588;
-+#else /*legac buffer*/
-+ MCF_FEC_ECR0 = MCF_FEC_ECR_ETHER_EN;
-+ MCF_FEC_ECR1 = MCF_FEC_ECR_ETHER_EN;
-+#endif
-+ /*
-+ * Set MII speed to 2.5 MHz
-+ */
-+ MCF_FEC_MSCR0 = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
-+ MCF_FEC_MSCR1 = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
-+
-+}
-+
-+static void switch_get_mac(struct net_device *dev)
-+{
-+ struct switch_enet_private *fep = netdev_priv(dev);
-+ volatile switch_t *fecp;
-+ unsigned char *iap;
-+
-+ fecp = fep->hwp;
-+
-+ if (FEC_FLASHMAC) {
-+ /*
-+ * Get MAC address from FLASH.
-+ * If it is all 1's or 0's, use the default.
-+ */
-+ iap = FEC_FLASHMAC;
-+ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
-+ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
-+ iap = switch_mac_default;
-+ if ((iap[0] == 0xff) && (iap[1] == 0xff) &&
-+ (iap[2] == 0xff) && (iap[3] == 0xff) &&
-+ (iap[4] == 0xff) && (iap[5] == 0xff))
-+ iap = switch_mac_default;
-+
-+ } else {
-+ iap = &switch_mac_addr[0];
-+
-+ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
-+ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
-+ iap = switch_mac_default;
-+ if ((iap[0] == 0xff) && (iap[1] == 0xff) &&
-+ (iap[2] == 0xff) && (iap[3] == 0xff) &&
-+ (iap[4] == 0xff) && (iap[5] == 0xff))
-+ iap = switch_mac_default;
-+ }
-+
-+ memcpy(dev->dev_addr, iap, ETH_ALEN);
-+ /* Adjust MAC if using default MAC address */
-+ if (iap == switch_mac_default)
-+ dev->dev_addr[ETH_ALEN-1] = switch_mac_default[ETH_ALEN-1] +
-+ fep->index;
-+}
-+
-+static void switch_enable_phy_intr(void)
-+{
-+}
-+
-+static void switch_disable_phy_intr(void)
-+{
-+}
-+
-+static void switch_phy_ack_intr(void)
-+{
-+}
-+
-+static void switch_localhw_setup(void)
-+{
-+}
-+
-+static void switch_uncache(unsigned long addr)
-+{
-+}
-+
-+static void switch_platform_flush_cache(void)
-+{
-+}
-+
-+/*
-+ * Define the fixed address of the FEC hardware.
-+ */
-+static unsigned int switch_platform_hw[] = {
-+ (0xfc0dc000),
-+ (0xfc0e000),
-+};
-+
-+static struct coldfire_switch_platform_data mcf5441x_switch_data = {
-+ .hash_table = 0,
-+ .switch_hw = switch_platform_hw,
-+ .request_intrs = switch_request_intrs,
-+ .set_mii = switch_set_mii,
-+ .get_mac = switch_get_mac,
-+ .enable_phy_intr = switch_enable_phy_intr,
-+ .disable_phy_intr = switch_disable_phy_intr,
-+ .phy_ack_intr = switch_phy_ack_intr,
-+ .localhw_setup = switch_localhw_setup,
-+ .uncache = switch_uncache,
-+ .platform_flush_cache = switch_platform_flush_cache,
-+};
-+
-+static struct resource l2switch_coldfire_resources[] = {
-+ [0] = {
-+ .start = 0xFC0DC000,
-+ .end = 0xFC0DC508,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = (64 + 64 + 64 + 38),
-+ .end = (64 + 64 + 64 + 48),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = 0xFC0E0000,
-+ .end = 0xFC0E3FFC,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device l2switch_coldfire_device = {
-+ .name = "coldfire-switch",
-+ .id = 0,
-+ .resource = l2switch_coldfire_resources,
-+ .num_resources = ARRAY_SIZE(l2switch_coldfire_resources),
-+ .dev = {
-+ .platform_data = &mcf5441x_switch_data,
-+ .coherent_dma_mask = ~0, /* $$$ REVISIT */
-+ }
-+};
-+
-+
-+static int __init mcf5441x_switch_dev_init(void)
-+{
-+ int retval = 0;
-+
-+ retval = platform_device_register(&l2switch_coldfire_device);
-+
-+ if (retval < 0) {
-+ printk(KERN_ERR "MCF5441x L2Switch: platform_device_register"
-+ " failed with code=%d\n", retval);
-+ }
-+
-+ return retval;
-+}
-+
-+static int __init param_switch_addr_setup(char *str)
-+{
-+ char *end;
-+ int i;
-+
-+ for (i = 0; i < 6; i++) {
-+ switch_mac_addr[i] = str ? simple_strtoul(str, &end, 16) : 0;
-+ if (str)
-+ str = (*end) ? end + 1 : end;
-+ }
-+ return 0;
-+}
-+__setup("switchaddr=", param_switch_addr_setup);
-+
-+arch_initcall(mcf5441x_switch_dev_init);
---- /dev/null
-+++ b/arch/m68k/include/asm/mcfswitch.h
-@@ -0,0 +1,324 @@
-+/****************************************************************************/
-+
-+/*
-+ * mcfswitch -- L2 SWITCH Controller for Motorola ColdFire SoC
-+ * processors.
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+/****************************************************************************/
-+#ifndef SWITCH_H
-+#define SWITCH_H
-+/****************************************************************************/
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/platform_device.h>
-+#include <asm/pgtable.h>
-+
-+#define FEC_FLASHMAC 0
-+#define SWITCH_EPORT_NUMBER 2
-+
-+#ifdef CONFIG_SWITCH_DMA_USE_SRAM
-+#define TX_RING_SIZE 8 /* Must be power of two */
-+#define TX_RING_MOD_MASK 7 /* for this to work */
-+#else
-+#define TX_RING_SIZE 16 /* Must be power of two */
-+#define TX_RING_MOD_MASK 15 /* for this to work */
-+#endif
-+
-+typedef struct l2switch_port_statistics_status {
-+ /*outgoing frames discarded due to transmit queue congestion*/
-+ unsigned long MCF_ESW_POQC;
-+ /*incoming frames discarded due to VLAN domain mismatch*/
-+ unsigned long MCF_ESW_PMVID;
-+ /*incoming frames discarded due to untagged discard*/
-+ unsigned long MCF_ESW_PMVTAG;
-+ /*incoming frames discarded due port is in blocking state*/
-+ unsigned long MCF_ESW_PBL;
-+} esw_port_statistics_status;
-+
-+typedef struct l2switch {
-+ unsigned long ESW_REVISION;
-+ unsigned long ESW_SCRATCH;
-+ unsigned long ESW_PER;
-+ unsigned long reserved0[1];
-+ unsigned long ESW_VLANV;
-+ unsigned long ESW_DBCR;
-+ unsigned long ESW_DMCR;
-+ unsigned long ESW_BKLR;
-+ unsigned long ESW_BMPC;
-+ unsigned long ESW_MODE;
-+ unsigned long ESW_VIMSEL;
-+ unsigned long ESW_VOMSEL;
-+ unsigned long ESW_VIMEN;
-+ unsigned long ESW_VID;/*0x34*/
-+ /*from 0x38 0x3C*/
-+ unsigned long esw_reserved0[2];
-+ unsigned long ESW_MCR;/*0x40*/
-+ unsigned long ESW_EGMAP;
-+ unsigned long ESW_INGMAP;
-+ unsigned long ESW_INGSAL;
-+ unsigned long ESW_INGSAH;
-+ unsigned long ESW_INGDAL;
-+ unsigned long ESW_INGDAH;
-+ unsigned long ESW_ENGSAL;
-+ unsigned long ESW_ENGSAH;
-+ unsigned long ESW_ENGDAL;
-+ unsigned long ESW_ENGDAH;
-+ unsigned long ESW_MCVAL;/*0x6C*/
-+ /*from 0x70--0x7C*/
-+ unsigned long esw_reserved1[4];
-+ unsigned long ESW_MMSR;/*0x80*/
-+ unsigned long ESW_LMT;
-+ unsigned long ESW_LFC;
-+ unsigned long ESW_PCSR;
-+ unsigned long ESW_IOSR;
-+ unsigned long ESW_QWT;/*0x94*/
-+ unsigned long esw_reserved2[1];/*0x98*/
-+ unsigned long ESW_P0BCT;/*0x9C*/
-+ /*from 0xA0-0xB8*/
-+ unsigned long esw_reserved3[7];
-+ unsigned long ESW_P0FFEN;/*0xBC*/
-+ unsigned long ESW_PSNP[8];
-+ unsigned long ESW_IPSNP[8];
-+ unsigned long ESW_PVRES[3];
-+ /*from 0x10C-0x13C*/
-+ unsigned long esw_reserved4[13];
-+ unsigned long ESW_IPRES;/*0x140*/
-+ /*from 0x144-0x17C*/
-+ unsigned long esw_reserved5[15];
-+
-+ /*port0-port2 Priority Configuration 0xFC0D_C180-C188*/
-+ unsigned long ESW_PRES[3];
-+ /*from 0x18C-0x1FC*/
-+ unsigned long esw_reserved6[29];
-+
-+ /*port0-port2 VLAN ID 0xFC0D_C200-C208*/
-+ unsigned long ESW_PID[3];
-+ /*from 0x20C-0x27C*/
-+ unsigned long esw_reserved7[29];
-+
-+ /*port0-port2 VLAN domain resolution entry 0xFC0D_C280-C2FC*/
-+ unsigned long ESW_VRES[32];
-+
-+ unsigned long ESW_DISCN;/*0x300*/
-+ unsigned long ESW_DISCB;
-+ unsigned long ESW_NDISCN;
-+ unsigned long ESW_NDISCB;/*0xFC0DC30C*/
-+ /*per port statistics 0xFC0DC310_C33C*/
-+ esw_port_statistics_status port_statistics_status[3];
-+ /*from 0x340-0x400*/
-+ unsigned long esw_reserved8[48];
-+
-+ /*0xFC0DC400---0xFC0DC418*/
-+ /*unsigned long MCF_ESW_ISR;*/
-+ unsigned long switch_ievent; /* Interrupt event reg */
-+ /*unsigned long MCF_ESW_IMR;*/
-+ unsigned long switch_imask; /* Interrupt mask reg */
-+ /*unsigned long MCF_ESW_RDSR;*/
-+ unsigned long fec_r_des_start; /* Receive descriptor ring */
-+ /*unsigned long MCF_ESW_TDSR;*/
-+ unsigned long fec_x_des_start; /* Transmit descriptor ring */
-+ /*unsigned long MCF_ESW_MRBR;*/
-+ unsigned long fec_r_buff_size; /* Maximum receive buff size */
-+ /*unsigned long MCF_ESW_RDAR;*/
-+ unsigned long fec_r_des_active; /* Receive descriptor reg */
-+ /*unsigned long MCF_ESW_TDAR;*/
-+ unsigned long fec_x_des_active; /* Transmit descriptor reg */
-+ /*from 0x420-0x4FC*/
-+ unsigned long esw_reserved9[57];
-+
-+ /*0xFC0DC500---0xFC0DC508*/
-+ unsigned long ESW_LREC0;
-+ unsigned long ESW_LREC1;
-+ unsigned long ESW_LSR;
-+} switch_t;
-+
-+typedef struct _64bTableEntry {
-+ unsigned int lo; /* lower 32 bits */
-+ unsigned int hi; /* upper 32 bits */
-+} AddrTable64bEntry;
-+
-+typedef struct l2switchaddrtable {
-+ AddrTable64bEntry eswTable64bEntry[2048];
-+} eswAddrTable_t;
-+
-+#define MCF_FEC_MSCR0 (*(volatile unsigned long *)(0xFC0D4044))
-+#define MCF_FEC_MSCR1 (*(volatile unsigned long *)(0xFC0D8044))
-+#define MCF_FEC_RCR0 (*(volatile unsigned long *)(0xFC0D4084))
-+#define MCF_FEC_RCR1 (*(volatile unsigned long *)(0xFC0D8084))
-+#define MCF_FEC_TCR0 (*(volatile unsigned long *)(0xFC0D40C4))
-+#define MCF_FEC_TCR1 (*(volatile unsigned long *)(0xFC0D80C4))
-+#define MCF_FEC_ECR0 (*(volatile unsigned long *)(0xFC0D4024))
-+#define MCF_FEC_ECR1 (*(volatile unsigned long *)(0xFC0D8024))
-+
-+#define MCF_FEC_RCR_PROM (0x00000008)
-+#define MCF_FEC_RCR_RMII_MODE (0x00000100)
-+#define MCF_FEC_RCR_MAX_FL(x) (((x)&0x00003FFF)<<16)
-+#define MCF_FEC_RCR_CRC_FWD (0x00004000)
-+
-+#define MCF_FEC_TCR_FDEN (0x00000004)
-+
-+#define MCF_FEC_ECR_ETHER_EN (0x00000002)
-+#define MCF_FEC_ECR_ENA_1588 (0x00000010)
-+
-+
-+typedef struct bufdesc {
-+ unsigned short cbd_sc; /* Control and status info */
-+ unsigned short cbd_datlen; /* Data length */
-+ unsigned long cbd_bufaddr; /* Buffer address */
-+#ifdef MODELO_BUFFER
-+ unsigned long ebd_status;
-+ unsigned short length_proto_type;
-+ unsigned short payload_checksum;
-+ unsigned long bdu;
-+ unsigned long timestamp;
-+ unsigned long reserverd_word1;
-+ unsigned long reserverd_word2;
-+#endif
-+} cbd_t;
-+
-+/* Forward declarations of some structures to support different PHYs
-+ */
-+typedef struct {
-+ uint mii_data;
-+ void (*funct)(uint mii_reg, struct net_device *dev);
-+} phy_cmd_t;
-+
-+typedef struct {
-+ uint id;
-+ char *name;
-+
-+ const phy_cmd_t *config;
-+ const phy_cmd_t *startup;
-+ const phy_cmd_t *ack_int;
-+ const phy_cmd_t *shutdown;
-+} phy_info_t;
-+
-+/* The switch buffer descriptors track the ring buffers. The rx_bd_base and
-+ * tx_bd_base always point to the base of the buffer descriptors. The
-+ * cur_rx and cur_tx point to the currently available buffer.
-+ * The dirty_tx tracks the current buffer that is being sent by the
-+ * controller. The cur_tx and dirty_tx are equal under both completely
-+ * empty and completely full conditions. The empty/ready indicator in
-+ * the buffer descriptor determines the actual condition.
-+ */
-+struct switch_enet_private {
-+ /* Hardware registers of the switch device */
-+ volatile switch_t *hwp;
-+ volatile eswAddrTable_t *hwentry;
-+
-+ struct net_device *netdev;
-+ struct platform_device *pdev;
-+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
-+ unsigned char *tx_bounce[TX_RING_SIZE];
-+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
-+ ushort skb_cur;
-+ ushort skb_dirty;
-+
-+ /* CPM dual port RAM relative addresses.
-+ */
-+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
-+ cbd_t *tx_bd_base;
-+ cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
-+ cbd_t *dirty_tx; /* The ring entries to be free()ed. */
-+ uint tx_full;
-+ /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
-+ spinlock_t hw_lock;
-+
-+ /* hold while accessing the mii_list_t() elements */
-+ spinlock_t mii_lock;
-+ struct mii_bus *mdio_bus;
-+ struct phy_device *phydev[SWITCH_EPORT_NUMBER];
-+
-+ uint phy_id;
-+ uint phy_id_done;
-+ uint phy_status;
-+ uint phy_speed;
-+ phy_info_t const *phy;
-+ struct work_struct phy_task;
-+ volatile switch_t *phy_hwp;
-+
-+ uint sequence_done;
-+ uint mii_phy_task_queued;
-+
-+ uint phy_addr;
-+
-+ int index;
-+ int opened;
-+ int full_duplex;
-+ int msg_enable;
-+ int phy1_link;
-+ int phy1_old_link;
-+ int phy1_duplex;
-+ int phy1_speed;
-+
-+ int phy2_link;
-+ int phy2_old_link;
-+ int phy2_duplex;
-+ int phy2_speed;
-+ /* --------------Statistics--------------------------- */
-+ /* when a new element deleted a element with in
-+ * a block due to lack of space */
-+ int atBlockOverflows;
-+ /* Peak number of valid entries in the address table */
-+ int atMaxEntries;
-+ /* current number of valid entries in the address table */
-+ int atCurrEntries;
-+ /* maximum entries within a block found
-+ * (updated within ageing)*/
-+ int atMaxEntriesPerBlock;
-+
-+ /* -------------------ageing function------------------ */
-+ /* maximum age allowed for an entry */
-+ int ageMax;
-+ /* last LUT entry to block that was
-+ * inspected by the Ageing task*/
-+ int ageLutIdx;
-+ /* last element within block inspected by the Ageing task */
-+ int ageBlockElemIdx;
-+ /* complete table has been processed by ageing process */
-+ int ageCompleted;
-+ /* delay setting */
-+ int ageDelay;
-+ /* current delay Counter */
-+ int ageDelayCnt;
-+
-+ /* ----------------timer related---------------------------- */
-+ /* current time (for timestamping) */
-+ int currTime;
-+ /* flag set by timer when currTime changed
-+ * and cleared by serving function*/
-+ int timeChanged;
-+
-+ /* Timer for Aging */
-+ struct timer_list timer_aging;
-+ int learning_irqhandle_enable;
-+};
-+
-+struct switch_platform_private {
-+ struct platform_device *pdev;
-+
-+ unsigned long quirks;
-+ int num_slots; /* Slots on controller */
-+ struct switch_enet_private *fep_host[0]; /* Pointers to hosts */
-+};
-+#endif
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -1950,6 +1950,14 @@ config FEC
- Say Y here if you want to use the built-in 10/100 Fast ethernet
- controller on some Motorola ColdFire and Freescale i.MX processors.
-
-+config MODELO_SWITCH
-+ bool "ethernet switch controller (of ColdFire CPUs)"
-+ depends on !FEC && M5441X
-+ help
-+ Say Y here if you want to use the built-in ethernet switch
-+ controller on some ColdFire processors.
-+ The Integrated Ethernet switch engine is compatible with
-+ 10/100 MAC-NET core.
-
- config FEC2
- bool "Second FEC ethernet controller (on some ColdFire CPUs)"
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -127,6 +127,7 @@ ifeq ($(CONFIG_FEC_1588), y)
- obj-$(CONFIG_FEC) += fec_1588.o
- endif
- obj-$(CONFIG_FEC_548x) += fec_m547x.o
-+obj-$(CONFIG_MODELO_SWITCH) += modelo_switch.o
- obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
- ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
- obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
---- /dev/null
-+++ b/drivers/net/modelo_switch.c
-@@ -0,0 +1,4293 @@
-+/*
-+ * L2 switch Controller (Etheren switch) driver for MCF5441x.
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Shrek Wu (B16972@freescale.com)
-+ * Alison Wang (b18965@freescale.com)
-+ * Jason Jin (Jason.jin@freescale.com)
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/ptrace.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/bitops.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/phy.h>
-+#include <linux/kthread.h>
-+#include <linux/syscalls.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+#include <linux/signal.h>
-+
-+#include <asm/irq.h>
-+#include <asm/pgtable.h>
-+#include <asm/cacheflush.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include "modelo_switch.h"
-+
-+#define SWITCH_MAX_PORTS 1
-+#define CONFIG_FEC_SHARED_PHY
-+
-+/* Interrupt events/masks.
-+*/
-+#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
-+#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
-+#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
-+#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
-+#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
-+#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
-+#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
-+#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
-+#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
-+#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
-+
-+static int switch_enet_open(struct net_device *dev);
-+static int switch_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static irqreturn_t switch_enet_interrupt(int irq, void *dev_id);
-+static void switch_enet_tx(struct net_device *dev);
-+static void switch_enet_rx(struct net_device *dev);
-+static int switch_enet_close(struct net_device *dev);
-+static void set_multicast_list(struct net_device *dev);
-+static void switch_restart(struct net_device *dev, int duplex);
-+static void switch_stop(struct net_device *dev);
-+static void switch_set_mac_address(struct net_device *dev);
-+
-+#define NMII 20
-+
-+/* Make MII read/write commands for the FEC.
-+*/
-+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
-+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \
-+ (VAL & 0xffff))
-+
-+/* Transmitter timeout.
-+*/
-+#define TX_TIMEOUT (2*HZ)
-+
-+/*last read entry from learning interface*/
-+eswPortInfo g_info;
-+/* switch ports status */
-+struct port_status ports_link_status;
-+
-+/* the user space pid, used to send the link change to user space */
-+long user_pid = 1;
-+
-+/* ----------------------------------------------------------------*/
-+/*
-+ * Calculate Galois Field Arithmetic CRC for Polynom x^8+x^2+x+1.
-+ * It omits the final shift in of 8 zeroes a "normal" CRC would do
-+ * (getting the remainder).
-+ *
-+ * Examples (hexadecimal values):<br>
-+ * 10-11-12-13-14-15 => CRC=0xc2
-+ * 10-11-cc-dd-ee-00 => CRC=0xe6
-+ *
-+ * param: pmacaddress
-+ * A 6-byte array with the MAC address.
-+ * The first byte is the first byte transmitted
-+ * return The 8-bit CRC in bits 7:0
-+ */
-+int crc8_calc(unsigned char *pmacaddress)
-+{
-+ /* byte index */
-+ int byt;
-+ /* bit index */
-+ int bit;
-+ int inval;
-+ int crc;
-+ /* preset */
-+ crc = 0x12;
-+ for (byt = 0; byt < 6; byt++) {
-+ inval = (((int)pmacaddress[byt]) & 0xff);
-+ /*
-+ * shift bit 0 to bit 8 so all our bits
-+ * travel through bit 8
-+ * (simplifies below calc)
-+ */
-+ inval <<= 8;
-+
-+ for (bit = 0; bit < 8; bit++) {
-+ /* next input bit comes into d7 after shift */
-+ crc |= inval & 0x100;
-+ if (crc & 0x01)
-+ /* before shift */
-+ crc ^= 0x1c0;
-+
-+ crc >>= 1;
-+ inval >>= 1;
-+ }
-+
-+ }
-+ /* upper bits are clean as we shifted in zeroes! */
-+ return crc;
-+}
-+
-+void read_atable(struct switch_enet_private *fep,
-+ int index, unsigned long *read_lo, unsigned long *read_hi)
-+{
-+ unsigned long atable_base = 0xFC0E0000;
-+
-+ *read_lo = *((volatile unsigned long *)(atable_base + (index<<3)));
-+ *read_hi = *((volatile unsigned long *)(atable_base + (index<<3) + 4));
-+}
-+
-+void write_atable(struct switch_enet_private *fep,
-+ int index, unsigned long write_lo, unsigned long write_hi)
-+{
-+ unsigned long atable_base = 0xFC0E0000;
-+
-+ *((volatile unsigned long *)(atable_base + (index<<3))) = write_lo;
-+ *((volatile unsigned long *)(atable_base + (index<<3) + 4)) = write_hi;
-+}
-+
-+/* Check if the Port Info FIFO has data available
-+ * for reading. 1 valid, 0 invalid*/
-+int esw_portinfofifo_status(struct switch_enet_private *fep)
-+{
-+ volatile switch_t *fecp;
-+ fecp = fep->hwp;
-+ return fecp->ESW_LSR;
-+}
-+
-+/* Initialize the Port Info FIFO. */
-+void esw_portinfofifo_initialize(struct switch_enet_private *fep)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long tmp;
-+ fecp = fep->hwp;
-+
-+ /*disable all learn*/
-+ fecp->switch_imask &= (~MCF_ESW_IMR_LRN);
-+ /* remove all entries from FIFO */
-+ while (esw_portinfofifo_status(fep)) {
-+ /* read one data word */
-+ tmp = fecp->ESW_LREC0;
-+ tmp = fecp->ESW_LREC1;
-+ }
-+
-+}
-+
-+/* Read one element from the HW receive FIFO (Queue)
-+ * if available and return it.
-+ * return ms_HwPortInfo or null if no data is available
-+ */
-+eswPortInfo *esw_portinfofifo_read(struct switch_enet_private *fep)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long tmp;
-+
-+ fecp = fep->hwp;
-+ /* check learning record valid */
-+ if (fecp->ESW_LSR == 0)
-+ return NULL;
-+
-+ /*read word from FIFO*/
-+ g_info.maclo = fecp->ESW_LREC0;
-+
-+ /*but verify that we actually did so
-+ * (0=no data available)*/
-+ if (g_info.maclo == 0)
-+ return NULL;
-+
-+ /* read 2nd word from FIFO */
-+ tmp = fecp->ESW_LREC1;
-+ g_info.machi = tmp & 0xffff;
-+ g_info.hash = (tmp >> 16) & 0xff;
-+ g_info.port = (tmp >> 24) & 0xf;
-+
-+ return &g_info;
-+}
-+
-+/*
-+ * Clear complete MAC Look Up Table
-+ */
-+void esw_clear_atable(struct switch_enet_private *fep)
-+{
-+ int index;
-+ for (index = 0; index < 2048; index++)
-+ write_atable(fep, index, 0, 0);
-+}
-+
-+void esw_dump_atable(struct switch_enet_private *fep)
-+{
-+ int index;
-+ unsigned long read_lo, read_hi;
-+ for (index = 0; index < 2048; index++)
-+ read_atable(fep, index, &read_lo, &read_hi);
-+}
-+
-+/*
-+ * pdates MAC address lookup table with a static entry
-+ * Searches if the MAC address is already there in the block and replaces
-+ * the older entry with new one. If MAC address is not there then puts a
-+ * new entry in the first empty slot available in the block
-+ *
-+ * mac_addr Pointer to the array containing MAC address to
-+ * be put as static entry
-+ * port Port bitmask numbers to be added in static entry,
-+ * valid values are 1-7
-+ * priority Priority for the static entry in table
-+ *
-+ * return 0 for a successful update else -1 when no slot available
-+ */
-+int esw_update_atable_static(unsigned char *mac_addr,
-+ unsigned int port, unsigned int priority,
-+ struct switch_enet_private *fep)
-+{
-+ unsigned long block_index, entry, index_end;
-+ unsigned long read_lo, read_hi;
-+ unsigned long write_lo, write_hi;
-+
-+ write_lo = (unsigned long)((mac_addr[3] << 24) |
-+ (mac_addr[2] << 16) |
-+ (mac_addr[1] << 8) |
-+ mac_addr[0]);
-+ write_hi = (unsigned long)(0 |
-+ (port << AT_SENTRY_PORTMASK_shift) |
-+ (priority << AT_SENTRY_PRIO_shift) |
-+ (AT_ENTRY_TYPE_STATIC << AT_ENTRY_TYPE_shift) |
-+ (AT_ENTRY_RECORD_VALID << AT_ENTRY_VALID_shift) |
-+ (mac_addr[5] << 8) | (mac_addr[4]));
-+
-+ block_index = GET_BLOCK_PTR(crc8_calc(mac_addr));
-+ index_end = block_index + ATABLE_ENTRY_PER_SLOT;
-+ /* Now search all the entries in the selected block */
-+ for (entry = block_index; entry < index_end; entry++) {
-+ read_atable(fep, entry, &read_lo, &read_hi);
-+ /*
-+ * MAC address matched, so update the
-+ * existing entry
-+ * even if its a dynamic one
-+ */
-+ if ((read_lo == write_lo) && ((read_hi & 0x0000ffff) ==
-+ (write_hi & 0x0000ffff))) {
-+ write_atable(fep, entry, write_lo, write_hi);
-+ return 0;
-+ } else if (!(read_hi & (1 << 16))) {
-+ /*
-+ * Fill this empty slot (valid bit zero),
-+ * assuming no holes in the block
-+ */
-+ write_atable(fep, entry, write_lo, write_hi);
-+ fep->atCurrEntries++;
-+ return 0;
-+ }
-+ }
-+
-+ /* No space available for this static entry */
-+ return -1;
-+}
-+
-+/* lookup entry in given Address Table slot and
-+ * insert (learn) it if it is not found.
-+ * return 0 if entry was found and updated.
-+ * 1 if entry was not found and has been inserted (learned).
-+ */
-+int esw_update_atable_dynamic(unsigned char *mac_addr, unsigned int port,
-+ unsigned int currTime, struct switch_enet_private *fep)
-+{
-+ unsigned long block_index, entry, index_end;
-+ unsigned long read_lo, read_hi;
-+ unsigned long write_lo, write_hi;
-+ unsigned long tmp;
-+ int time, timeold, indexold;
-+
-+ /* prepare update port and timestamp */
-+ write_hi = (mac_addr[5] << 8) | (mac_addr[4]);
-+ write_lo = (unsigned long)((mac_addr[3] << 24) |
-+ (mac_addr[2] << 16) |
-+ (mac_addr[1] << 8) |
-+ mac_addr[0]);
-+ tmp = AT_ENTRY_RECORD_VALID << AT_ENTRY_VALID_shift;
-+ tmp |= AT_ENTRY_TYPE_DYNAMIC << AT_ENTRY_TYPE_shift;
-+ tmp |= currTime << AT_DENTRY_TIME_shift;
-+ tmp |= port << AT_DENTRY_PORT_shift;
-+ tmp |= write_hi;
-+
-+ /*
-+ * linear search through all slot
-+ * entries and update if found
-+ */
-+ block_index = GET_BLOCK_PTR(crc8_calc(mac_addr));
-+ index_end = block_index + ATABLE_ENTRY_PER_SLOT;
-+ /* Now search all the entries in the selected block */
-+ for (entry = block_index; entry < index_end; entry++) {
-+ read_atable(fep, entry, &read_lo, &read_hi);
-+
-+ if ((read_lo == write_lo) &&
-+ ((read_hi & 0x0000ffff) ==
-+ (write_hi & 0x0000ffff))) {
-+ /* found correct address,
-+ * update timestamp. */
-+ write_atable(fep, entry, write_lo, tmp);
-+ return 0;
-+ } else if (!(read_hi & (1 << 16))) {
-+ /* slot is empty, then use it
-+ * for new entry
-+ * Note: There are no holes,
-+ * therefore cannot be any
-+ * more that need to be compared.
-+ */
-+ write_atable(fep, entry, write_lo, tmp);
-+ /* statistics (we do it between writing
-+ * .hi an .lo due to
-+ * hardware limitation...
-+ */
-+ fep->atCurrEntries++;
-+ /* newly inserted */
-+ return 1;
-+ }
-+ }
-+
-+ /*
-+ * no more entry available in blockk ...
-+ * overwrite oldest
-+ */
-+ timeold = 0;
-+ indexold = 0;
-+ for (entry = block_index; entry < index_end; entry++) {
-+ read_atable(fep, entry, &read_lo, &read_hi);
-+ time = AT_EXTRACT_TIMESTAMP(read_hi);
-+ time = TIMEDELTA(currTime, time);
-+ if (time > timeold) {
-+ /* is it older ?*/
-+ timeold = time;
-+ indexold = entry;
-+ }
-+ }
-+
-+ write_atable(fep, indexold, write_lo, tmp);
-+ /* Statistics (do it inbetween
-+ * writing to .lo and .hi*/
-+ fep->atBlockOverflows++;
-+ /* newly inserted */
-+ return 1;
-+}
-+
-+int esw_update_atable_dynamic1(unsigned long write_lo, unsigned long write_hi,
-+ int block_index, unsigned int port, unsigned int currTime,
-+ struct switch_enet_private *fep)
-+{
-+ unsigned long entry, index_end;
-+ unsigned long read_lo, read_hi;
-+ unsigned long tmp;
-+ int time, timeold, indexold;
-+
-+ /* prepare update port and timestamp */
-+ tmp = AT_ENTRY_RECORD_VALID << AT_ENTRY_VALID_shift;
-+ tmp |= AT_ENTRY_TYPE_DYNAMIC << AT_ENTRY_TYPE_shift;
-+ tmp |= currTime << AT_DENTRY_TIME_shift;
-+ tmp |= port << AT_DENTRY_PORT_shift;
-+ tmp |= write_hi;
-+
-+ /*
-+ * linear search through all slot
-+ * entries and update if found
-+ */
-+ index_end = block_index + ATABLE_ENTRY_PER_SLOT;
-+ /* Now search all the entries in the selected block */
-+ for (entry = block_index; entry < index_end; entry++) {
-+ read_atable(fep, entry, &read_lo, &read_hi);
-+ if ((read_lo == write_lo) &&
-+ ((read_hi & 0x0000ffff) ==
-+ (write_hi & 0x0000ffff))) {
-+ /* found correct address,
-+ * update timestamp. */
-+ write_atable(fep, entry, write_lo, tmp);
-+ return 0;
-+ } else if (!(read_hi & (1 << 16))) {
-+ /* slot is empty, then use it
-+ * for new entry
-+ * Note: There are no holes,
-+ * therefore cannot be any
-+ * more that need to be compared.
-+ */
-+ write_atable(fep, entry, write_lo, tmp);
-+ /* statistics (we do it between writing
-+ * .hi an .lo due to
-+ * hardware limitation...
-+ */
-+ fep->atCurrEntries++;
-+ /* newly inserted */
-+ return 1;
-+ }
-+ }
-+
-+ /*
-+ * no more entry available in block ...
-+ * overwrite oldest
-+ */
-+ timeold = 0;
-+ indexold = 0;
-+ for (entry = block_index; entry < index_end; entry++) {
-+ read_atable(fep, entry, &read_lo, &read_hi);
-+ time = AT_EXTRACT_TIMESTAMP(read_hi);
-+ time = TIMEDELTA(currTime, time);
-+ if (time > timeold) {
-+ /* is it older ?*/
-+ timeold = time;
-+ indexold = entry;
-+ }
-+ }
-+
-+ write_atable(fep, indexold, write_lo, tmp);
-+ /* Statistics (do it inbetween
-+ * writing to .lo and .hi*/
-+ fep->atBlockOverflows++;
-+ /* newly inserted */
-+ return 1;
-+}
-+
-+/*
-+ * Delete one dynamic entry within the given block
-+ * of 64-bit entries.
-+ * return number of valid entries in the block after deletion.
-+ */
-+int esw_del_atable_dynamic(struct switch_enet_private *fep,
-+ int blockidx, int entryidx)
-+{
-+ unsigned long index_start, index_end;
-+ int i;
-+ unsigned long read_lo, read_hi;
-+
-+ /* the entry to delete */
-+ index_start = blockidx + entryidx;
-+ /* one after last */
-+ index_end = blockidx + ATABLE_ENTRY_PER_SLOT;
-+ /* Statistics */
-+ fep->atCurrEntries--;
-+
-+ if (entryidx == (ATABLE_ENTRY_PER_SLOT - 1)) {
-+ /* if it is the very last entry,
-+ * just delete it without further efford*/
-+ write_atable(fep, index_start, 0, 0);
-+ /*number of entries left*/
-+ i = ATABLE_ENTRY_PER_SLOT - 1;
-+ return i;
-+ } else {
-+ /*not the last in the block, then
-+ * shift all that follow the one
-+ * that is deleted to avoid "holes".
-+ */
-+ for (i = index_start; i < (index_end - 1); i++) {
-+ read_atable(fep, i + 1, &read_lo, &read_hi);
-+ /* move it down */
-+ write_atable(fep, i, read_lo, read_hi);
-+ if (!(read_hi & (1 << 16))) {
-+ /* stop if we just copied the last */
-+ return i - blockidx;
-+ }
-+ }
-+
-+ /*moved all entries up to the last.
-+ * then set invalid flag in the last*/
-+ write_atable(fep, index_end - 1, 0, 0);
-+ /* number of valid entries left */
-+ return i - blockidx;
-+ }
-+}
-+
-+void esw_atable_dynamicms_del_entries_for_port(
-+ struct switch_enet_private *fep, int port_index)
-+{
-+ unsigned long read_lo, read_hi;
-+ unsigned int port_idx;
-+ int i;
-+
-+ for (i = 0; i < ESW_ATABLE_MEM_NUM_ENTRIES; i++) {
-+ read_atable(fep, i, &read_lo, &read_hi);
-+ if (read_hi & (1 << 16)) {
-+ port_idx = AT_EXTRACT_PORT(read_hi);
-+
-+ if (port_idx == port_index)
-+ write_atable(fep, i, 0, 0);
-+ }
-+ }
-+}
-+
-+void esw_atable_dynamicms_del_entries_for_other_port(
-+ struct switch_enet_private *fep,
-+ int port_index)
-+{
-+ unsigned long read_lo, read_hi;
-+ unsigned int port_idx;
-+ int i;
-+
-+ for (i = 0; i < ESW_ATABLE_MEM_NUM_ENTRIES; i++) {
-+ read_atable(fep, i, &read_lo, &read_hi);
-+ if (read_hi & (1 << 16)) {
-+ port_idx = AT_EXTRACT_PORT(read_hi);
-+
-+ if (port_idx != port_index)
-+ write_atable(fep, i, 0, 0);
-+ }
-+ }
-+}
-+
-+/*
-+ * Scan one complete block (Slot) for outdated entries and delete them.
-+ * blockidx index of block of entries that should be analyzed.
-+ * return number of deleted entries, 0 if nothing was modified.
-+ */
-+int esw_atable_dynamicms_check_block_age(
-+ struct switch_enet_private *fep, int blockidx) {
-+
-+ int i, tm, tdelta;
-+ int deleted = 0, entries = 0;
-+ unsigned long read_lo, read_hi;
-+ /* Scan all entries from last down to
-+ * have faster deletion speed if necessary*/
-+ for (i = (blockidx + ATABLE_ENTRY_PER_SLOT - 1);
-+ i >= blockidx; i--) {
-+ read_atable(fep, i, &read_lo, &read_hi);
-+
-+ if (read_hi & (1 << 16)) {
-+ /* the entry is valide*/
-+ tm = AT_EXTRACT_TIMESTAMP(read_hi);
-+ tdelta = TIMEDELTA(fep->currTime, tm);
-+ if (tdelta > fep->ageMax) {
-+ esw_del_atable_dynamic(fep,
-+ blockidx, i-blockidx);
-+ deleted++;
-+ } else {
-+ /* statistics */
-+ entries++;
-+ }
-+ }
-+ }
-+
-+ /*update statistics*/
-+ if (fep->atMaxEntriesPerBlock < entries)
-+ fep->atMaxEntriesPerBlock = entries;
-+
-+ return deleted;
-+}
-+
-+/* scan the complete address table and find the most current entry.
-+ * The time of the most current entry then is used as current time
-+ * for the context structure.
-+ * In addition the atCurrEntries value is updated as well.
-+ * return time that has been set in the context.
-+ */
-+int esw_atable_dynamicms_find_set_latesttime(
-+ struct switch_enet_private *fep) {
-+
-+ int tm_min, tm_max, tm;
-+ int delta, current, i;
-+ unsigned long read_lo, read_hi;
-+
-+ tm_min = (1 << AT_DENTRY_TIMESTAMP_WIDTH) - 1;
-+ tm_max = 0;
-+ current = 0;
-+
-+ for (i = 0; i < ESW_ATABLE_MEM_NUM_ENTRIES; i++) {
-+ read_atable(fep, i, &read_lo, &read_hi);
-+ if (read_hi & (1 << 16)) {
-+ /*the entry is valid*/
-+ tm = AT_EXTRACT_TIMESTAMP(read_hi);
-+ if (tm > tm_max)
-+ tm_max = tm;
-+ if (tm < tm_min)
-+ tm_min = tm;
-+ current++;
-+ }
-+ }
-+
-+ delta = TIMEDELTA(tm_max, tm_min);
-+ if (delta < fep->ageMax) {
-+ /*Difference must be in range*/
-+ fep->currTime = tm_max;
-+ } else {
-+ fep->currTime = tm_min;
-+ }
-+
-+ fep->atCurrEntries = current;
-+ return fep->currTime;
-+}
-+
-+int esw_atable_dynamicms_get_port(
-+ struct switch_enet_private *fep,
-+ unsigned long write_lo,
-+ unsigned long write_hi,
-+ int block_index)
-+{
-+ int i, index_end;
-+ unsigned long read_lo, read_hi, port;
-+
-+ index_end = block_index + ATABLE_ENTRY_PER_SLOT;
-+ /* Now search all the entries in the selected block */
-+ for (i = block_index; i < index_end; i++) {
-+ read_atable(fep, i, &read_lo, &read_hi);
-+
-+ if ((read_lo == write_lo) &&
-+ ((read_hi & 0x0000ffff) ==
-+ (write_hi & 0x0000ffff))) {
-+ /* found correct address,*/
-+ if (read_hi & (1 << 16)) {
-+ /*extract the port index from the valid entry*/
-+ port = AT_EXTRACT_PORT(read_hi);
-+ return port;
-+ }
-+ }
-+ }
-+
-+ return -1;
-+}
-+
-+/* Get the port index from the source MAC address
-+ * of the received frame
-+ * @return port index
-+ */
-+int esw_atable_dynamicms_get_portindex_from_mac(
-+ struct switch_enet_private *fep,
-+ unsigned char *mac_addr,
-+ unsigned long write_lo,
-+ unsigned long write_hi)
-+{
-+ int blockIdx;
-+ int rc;
-+ /*compute the block index*/
-+ blockIdx = GET_BLOCK_PTR(crc8_calc(mac_addr));
-+ /* Get the ingress port index of the received BPDU */
-+ rc = esw_atable_dynamicms_get_port(fep,
-+ write_lo, write_hi, blockIdx);
-+
-+ return rc;
-+}
-+
-+/* dynamicms MAC address table learn and migration*/
-+int esw_atable_dynamicms_learn_migration(
-+ struct switch_enet_private *fep,
-+ int currTime)
-+{
-+ eswPortInfo *pESWPortInfo;
-+ int index;
-+ int inserted = 0;
-+
-+ pESWPortInfo = esw_portinfofifo_read(fep);
-+ /* Anything to learn */
-+ if (pESWPortInfo != 0) {
-+ /*get block index from lookup table*/
-+ index = GET_BLOCK_PTR(pESWPortInfo->hash);
-+ inserted = esw_update_atable_dynamic1(
-+ pESWPortInfo->maclo,
-+ pESWPortInfo->machi, index,
-+ pESWPortInfo->port, currTime, fep);
-+ }
-+
-+ return 0;
-+}
-+/* -----------------------------------------------------------------*/
-+/*
-+ * esw_forced_forward
-+ * The frame is forwared to the forced destination ports.
-+ * It only replace the MAC lookup function,
-+ * all other filtering(eg.VLAN verification) act as normal
-+ */
-+int esw_forced_forward(struct switch_enet_private *fep,
-+ int port1, int port2, int enable)
-+{
-+ unsigned long tmp = 0;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ /* Enable Forced forwarding for port num */
-+ if ((port1 == 1) && (port2 == 1))
-+ tmp |= MCF_ESW_P0FFEN_FD(3);
-+ else if (port1 == 1)
-+ /*Enable Forced forwarding for port 1 only*/
-+ tmp |= MCF_ESW_P0FFEN_FD(1);
-+ else if (port2 == 1)
-+ /*Enable Forced forwarding for port 2 only*/
-+ tmp |= MCF_ESW_P0FFEN_FD(2);
-+ else {
-+ printk(KERN_ERR "%s:do not support "
-+ "the forced forward mode"
-+ "port1 %x port2 %x\n",
-+ __func__, port1, port2);
-+ return -1;
-+ }
-+
-+ if (enable == 1)
-+ tmp |= MCF_ESW_P0FFEN_FEN;
-+ else if (enable == 0)
-+ tmp &= ~MCF_ESW_P0FFEN_FEN;
-+ else {
-+ printk(KERN_ERR "%s: the enable %x is error\n",
-+ __func__, enable);
-+ return -2;
-+ }
-+
-+ fecp->ESW_P0FFEN = tmp;
-+ return 0;
-+}
-+
-+void esw_get_forced_forward(
-+ struct switch_enet_private *fep,
-+ unsigned long *ulForceForward)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulForceForward = fecp->ESW_P0FFEN;
-+}
-+
-+void esw_get_port_enable(
-+ struct switch_enet_private *fep,
-+ unsigned long *ulPortEnable)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulPortEnable = fecp->ESW_PER;
-+}
-+/*
-+ * enable or disable port n tx or rx
-+ * tx_en 0 disable port n tx
-+ * tx_en 1 enable port n tx
-+ * rx_en 0 disbale port n rx
-+ * rx_en 1 enable port n rx
-+ */
-+int esw_port_enable_config(struct switch_enet_private *fep,
-+ int port, int tx_en, int rx_en)
-+{
-+ unsigned long tmp = 0;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ tmp = fecp->ESW_PER;
-+ if (tx_en == 1) {
-+ if (port == 0)
-+ tmp |= MCF_ESW_PER_TE0;
-+ else if (port == 1)
-+ tmp |= MCF_ESW_PER_TE1;
-+ else if (port == 2)
-+ tmp |= MCF_ESW_PER_TE2;
-+ else {
-+ printk(KERN_ERR "%s:do not support the"
-+ " port %x tx enable\n",
-+ __func__, port);
-+ return -1;
-+ }
-+ } else if (tx_en == 0) {
-+ if (port == 0)
-+ tmp &= (~MCF_ESW_PER_TE0);
-+ else if (port == 1)
-+ tmp &= (~MCF_ESW_PER_TE1);
-+ else if (port == 2)
-+ tmp &= (~MCF_ESW_PER_TE2);
-+ else {
-+ printk(KERN_ERR "%s:do not support "
-+ "the port %x tx disable\n",
-+ __func__, port);
-+ return -2;
-+ }
-+ } else {
-+ printk(KERN_ERR "%s:do not support the port %x"
-+ " tx op value %x\n",
-+ __func__, port, tx_en);
-+ return -3;
-+ }
-+
-+ if (rx_en == 1) {
-+ if (port == 0)
-+ tmp |= MCF_ESW_PER_RE0;
-+ else if (port == 1)
-+ tmp |= MCF_ESW_PER_RE1;
-+ else if (port == 2)
-+ tmp |= MCF_ESW_PER_RE2;
-+ else {
-+ printk(KERN_ERR "%s:do not support the "
-+ "port %x rx enable\n",
-+ __func__, port);
-+ return -4;
-+ }
-+ } else if (rx_en == 0) {
-+ if (port == 0)
-+ tmp &= (~MCF_ESW_PER_RE0);
-+ else if (port == 1)
-+ tmp &= (~MCF_ESW_PER_RE1);
-+ else if (port == 2)
-+ tmp &= (~MCF_ESW_PER_RE2);
-+ else {
-+ printk(KERN_ERR "%s:do not support the "
-+ "port %x rx disable\n",
-+ __func__, port);
-+ return -5;
-+ }
-+ } else {
-+ printk(KERN_ERR "%s:do not support the port %x"
-+ " rx op value %x\n",
-+ __func__, port, tx_en);
-+ return -6;
-+ }
-+
-+ fecp->ESW_PER = tmp;
-+ return 0;
-+}
-+
-+
-+void esw_get_port_broadcast(struct switch_enet_private *fep,
-+ unsigned long *ulPortBroadcast)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulPortBroadcast = fecp->ESW_DBCR;
-+}
-+
-+int esw_port_broadcast_config(struct switch_enet_private *fep,
-+ int port, int enable)
-+{
-+ unsigned long tmp = 0;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if ((port > 2) || (port < 0)) {
-+ printk(KERN_ERR "%s:do not support the port %x"
-+ " default broadcast\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ tmp = fecp->ESW_DBCR;
-+ if (enable == 1) {
-+ if (port == 0)
-+ tmp |= MCF_ESW_DBCR_P0;
-+ else if (port == 1)
-+ tmp |= MCF_ESW_DBCR_P1;
-+ else if (port == 2)
-+ tmp |= MCF_ESW_DBCR_P2;
-+ } else if (enable == 0) {
-+ if (port == 0)
-+ tmp &= ~MCF_ESW_DBCR_P0;
-+ else if (port == 1)
-+ tmp &= ~MCF_ESW_DBCR_P1;
-+ else if (port == 2)
-+ tmp &= ~MCF_ESW_DBCR_P2;
-+ }
-+
-+ fecp->ESW_DBCR = tmp;
-+ return 0;
-+}
-+
-+
-+void esw_get_port_multicast(struct switch_enet_private *fep,
-+ unsigned long *ulPortMulticast)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulPortMulticast = fecp->ESW_DMCR;
-+}
-+
-+int esw_port_multicast_config(struct switch_enet_private *fep,
-+ int port, int enable)
-+{
-+ unsigned long tmp = 0;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if ((port > 2) || (port < 0)) {
-+ printk(KERN_ERR "%s:do not support the port %x"
-+ " default broadcast\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ tmp = fecp->ESW_DMCR;
-+ if (enable == 1) {
-+ if (port == 0)
-+ tmp |= MCF_ESW_DMCR_P0;
-+ else if (port == 1)
-+ tmp |= MCF_ESW_DMCR_P1;
-+ else if (port == 2)
-+ tmp |= MCF_ESW_DMCR_P2;
-+ } else if (enable == 0) {
-+ if (port == 0)
-+ tmp &= ~MCF_ESW_DMCR_P0;
-+ else if (port == 1)
-+ tmp &= ~MCF_ESW_DMCR_P1;
-+ else if (port == 2)
-+ tmp &= ~MCF_ESW_DMCR_P2;
-+ }
-+
-+ fecp->ESW_DMCR = tmp;
-+ return 0;
-+}
-+
-+
-+void esw_get_port_blocking(struct switch_enet_private *fep,
-+ unsigned long *ulPortBlocking)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulPortBlocking = (fecp->ESW_BKLR & 0x0000000f);
-+}
-+
-+int esw_port_blocking_config(struct switch_enet_private *fep,
-+ int port, int enable)
-+{
-+ unsigned long tmp = 0;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if ((port > 2) || (port < 0)) {
-+ printk(KERN_ERR "%s:do not support the port %x"
-+ " default broadcast\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ tmp = fecp->ESW_BKLR;
-+ if (enable == 1) {
-+ if (port == 0)
-+ tmp |= MCF_ESW_BKLR_BE0;
-+ else if (port == 1)
-+ tmp |= MCF_ESW_BKLR_BE1;
-+ else if (port == 2)
-+ tmp |= MCF_ESW_BKLR_BE2;
-+ } else if (enable == 0) {
-+ if (port == 0)
-+ tmp &= ~MCF_ESW_BKLR_BE0;
-+ else if (port == 1)
-+ tmp &= ~MCF_ESW_BKLR_BE1;
-+ else if (port == 2)
-+ tmp &= ~MCF_ESW_BKLR_BE2;
-+ }
-+
-+ fecp->ESW_BKLR = tmp;
-+ return 0;
-+}
-+
-+
-+void esw_get_port_learning(struct switch_enet_private *fep,
-+ unsigned long *ulPortLearning)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulPortLearning = (fecp->ESW_BKLR & 0x000f0000) >> 16;
-+}
-+
-+int esw_port_learning_config(struct switch_enet_private *fep,
-+ int port, int disable)
-+{
-+ unsigned long tmp = 0;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if ((port > 2) || (port < 0)) {
-+ printk(KERN_ERR "%s:do not support the port %x"
-+ " default broadcast\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ tmp = fecp->ESW_BKLR;
-+ if (disable == 0) {
-+ fep->learning_irqhandle_enable = 0;
-+ if (port == 0)
-+ tmp |= MCF_ESW_BKLR_LD0;
-+ else if (port == 1)
-+ tmp |= MCF_ESW_BKLR_LD1;
-+ else if (port == 2)
-+ tmp |= MCF_ESW_BKLR_LD2;
-+ } else if (disable == 1) {
-+ if (port == 0)
-+ tmp &= ~MCF_ESW_BKLR_LD0;
-+ else if (port == 1)
-+ tmp &= ~MCF_ESW_BKLR_LD1;
-+ else if (port == 2)
-+ tmp &= ~MCF_ESW_BKLR_LD2;
-+ }
-+
-+ fecp->ESW_BKLR = tmp;
-+ return 0;
-+}
-+/*********************************************************************/
-+void esw_mac_lookup_table_range(struct switch_enet_private *fep)
-+{
-+ int index;
-+ unsigned long read_lo, read_hi;
-+ /* Pointer to switch address look up memory*/
-+ for (index = 0; index < 2048; index++)
-+ write_atable(fep, index, index, (~index));
-+
-+ /* Pointer to switch address look up memory*/
-+ for (index = 0; index < 2048; index++) {
-+ read_atable(fep, index, &read_lo, &read_hi);
-+ if (read_lo != index) {
-+ printk(KERN_ERR "%s:Mismatch at low %d\n",
-+ __func__, index);
-+ return;
-+ }
-+
-+ if (read_hi != (~index)) {
-+ printk(KERN_ERR "%s:Mismatch at high %d\n",
-+ __func__, index);
-+ return;
-+ }
-+ }
-+}
-+
-+/*
-+ * Checks IP Snoop options of handling the snooped frame.
-+ * mode 0 : The snooped frame is forward only to management port
-+ * mode 1 : The snooped frame is copy to management port and
-+ * normal forwarding is checked.
-+ * mode 2 : The snooped frame is discarded.
-+ * mode 3 : Disable the ip snoop function
-+ * ip_header_protocol : the IP header protocol field
-+ */
-+int esw_ip_snoop_config(struct switch_enet_private *fep,
-+ int mode, unsigned long ip_header_protocol)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long tmp = 0, protocol_type = 0;
-+ int num = 0;
-+
-+ fecp = fep->hwp;
-+ /* Config IP Snooping */
-+ if (mode == 0) {
-+ /* Enable IP Snooping */
-+ tmp = MCF_ESW_IPSNP_EN;
-+ tmp |= MCF_ESW_IPSNP_MODE(0);/*For Forward*/
-+ } else if (mode == 1) {
-+ /* Enable IP Snooping */
-+ tmp = MCF_ESW_IPSNP_EN;
-+ /*For Forward and copy_to_mangmnt_port*/
-+ tmp |= MCF_ESW_IPSNP_MODE(1);
-+ } else if (mode == 2) {
-+ /* Enable IP Snooping */
-+ tmp = MCF_ESW_IPSNP_EN;
-+ tmp |= MCF_ESW_IPSNP_MODE(2);/*discard*/
-+ } else if (mode == 3) {
-+ /* disable IP Snooping */
-+ tmp = MCF_ESW_IPSNP_EN;
-+ tmp &= ~MCF_ESW_IPSNP_EN;
-+ } else {
-+ printk(KERN_ERR "%s: the mode %x "
-+ "we do not support\n", __func__, mode);
-+ return -1;
-+ }
-+
-+ protocol_type = ip_header_protocol;
-+ for (num = 0; num < 8; num++) {
-+ if (protocol_type ==
-+ AT_EXTRACT_IP_PROTOCOL(fecp->ESW_IPSNP[num])) {
-+ fecp->ESW_IPSNP[num] =
-+ tmp | MCF_ESW_IPSNP_PROTOCOL(protocol_type);
-+ break;
-+ } else if (!(fecp->ESW_IPSNP[num])) {
-+ fecp->ESW_IPSNP[num] =
-+ tmp | MCF_ESW_IPSNP_PROTOCOL(protocol_type);
-+ break;
-+ }
-+ }
-+ if (num == 8) {
-+ printk(KERN_INFO "IP snooping table is full\n");
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+
-+void esw_get_ip_snoop_config(struct switch_enet_private *fep,
-+ unsigned long *ulpESW_IPSNP)
-+{
-+ int i;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ for (i = 0; i < 8; i++)
-+ *(ulpESW_IPSNP + i) = fecp->ESW_IPSNP[i];
-+}
-+/*
-+ * Checks TCP/UDP Port Snoop options of handling the snooped frame.
-+ * mode 0 : The snooped frame is forward only to management port
-+ * mode 1 : The snooped frame is copy to management port and
-+ * normal forwarding is checked.
-+ * mode 2 : The snooped frame is discarded.
-+ * mode 3 : Disable the TCP/UDP port snoop function
-+ * compare_port : port number in the TCP/UDP header
-+ * compare_num 1: TCP/UDP source port number is compared
-+ * compare_num 2: TCP/UDP destination port number is compared
-+ * compare_num 3: TCP/UDP source and destination port number is compared
-+ */
-+int esw_tcpudp_port_snoop_config(struct switch_enet_private *fep,
-+ int mode, int compare_port, int compare_num)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long tmp;
-+ int num;
-+
-+ fecp = fep->hwp;
-+
-+ /* Enable TCP/UDP port Snooping */
-+ tmp = MCF_ESW_PSNP_EN;
-+ if (mode == 0)
-+ tmp |= MCF_ESW_PSNP_MODE(0);/*For Forward*/
-+ else if (mode == 1)/*For Forward and copy_to_mangmnt_port*/
-+ tmp |= MCF_ESW_PSNP_MODE(1);
-+ else if (mode == 2)
-+ tmp |= MCF_ESW_PSNP_MODE(2);/*discard*/
-+ else if (mode == 3) /*disable the port function*/
-+ tmp &= (~MCF_ESW_PSNP_EN);
-+ else {
-+ printk(KERN_ERR "%s: the mode %x we do not support\n",
-+ __func__, mode);
-+ return -1;
-+ }
-+
-+ if (compare_num == 1)
-+ tmp |= MCF_ESW_PSNP_CS;
-+ else if (compare_num == 2)
-+ tmp |= MCF_ESW_PSNP_CD;
-+ else if (compare_num == 3)
-+ tmp |= MCF_ESW_PSNP_CD | MCF_ESW_PSNP_CS;
-+ else {
-+ printk(KERN_ERR "%s: the compare port address %x"
-+ " we do not support\n",
-+ __func__, compare_num);
-+ return -1;
-+ }
-+
-+ for (num = 0; num < 8; num++) {
-+ if (compare_port ==
-+ AT_EXTRACT_TCP_UDP_PORT(fecp->ESW_PSNP[num])) {
-+ fecp->ESW_PSNP[num] =
-+ tmp | MCF_ESW_PSNP_PORT_COMPARE(compare_port);
-+ break;
-+ } else if (!(fecp->ESW_PSNP[num])) {
-+ fecp->ESW_PSNP[num] =
-+ tmp | MCF_ESW_PSNP_PORT_COMPARE(compare_port);
-+ break;
-+ }
-+ }
-+ if (num == 8) {
-+ printk(KERN_INFO "TCP/UDP port snooping table is full\n");
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+
-+void esw_get_tcpudp_port_snoop_config(
-+ struct switch_enet_private *fep,
-+ unsigned long *ulpESW_PSNP)
-+{
-+ int i;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ for (i = 0; i < 8; i++)
-+ *(ulpESW_PSNP + i) = fecp->ESW_PSNP[i];
-+}
-+/*-----------------mirror----------------------------------------*/
-+void esw_get_port_mirroring(struct switch_enet_private *fep)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ printk(KERN_INFO "Mirror Port: %1ld Egress Port Match:%s "
-+ "Ingress Port Match:%s\n", fecp->ESW_MCR & 0xf,
-+ (fecp->ESW_MCR >> 6) & 1 ? "Y" : "N",
-+ (fecp->ESW_MCR >> 5) & 1 ? "Y" : "N");
-+
-+ if ((fecp->ESW_MCR >> 6) & 1)
-+ printk(KERN_INFO "Egress Port to be mirrored: Port %ld\n",
-+ fecp->ESW_EGMAP >> 1);
-+ if ((fecp->ESW_MCR >> 5) & 1)
-+ printk(KERN_INFO "Ingress Port to be mirrored: Port %ld\n",
-+ fecp->ESW_INGMAP >> 1);
-+
-+ printk(KERN_INFO "Egress Des Address Match:%s "
-+ "Egress Src Address Match:%s\n",
-+ (fecp->ESW_MCR >> 10) & 1 ? "Y" : "N",
-+ (fecp->ESW_MCR >> 9) & 1 ? "Y" : "N");
-+ printk(KERN_INFO "Ingress Des Address Match:%s "
-+ "Ingress Src Address Match:%s\n",
-+ (fecp->ESW_MCR >> 8) & 1 ? "Y" : "N",
-+ (fecp->ESW_MCR >> 7) & 1 ? "Y" : "N");
-+
-+ if ((fecp->ESW_MCR >> 10) & 1)
-+ printk(KERN_INFO "Egress Des Address to be mirrored: "
-+ "%02lx-%02lx-%02lx-%02lx-%02lx-%02lx\n",
-+ fecp->ESW_ENGDAL & 0xff, (fecp->ESW_ENGDAL >> 8) & 0xff,
-+ (fecp->ESW_ENGDAL >> 16) & 0xff,
-+ (fecp->ESW_ENGDAL >> 24) & 0xff,
-+ fecp->ESW_ENGDAH & 0xff,
-+ (fecp->ESW_ENGDAH >> 8) & 0xff);
-+ if ((fecp->ESW_MCR >> 9) & 1)
-+ printk("Egress Src Address to be mirrored: "
-+ "%02lx-%02lx-%02lx-%02lx-%02lx-%02lx\n",
-+ fecp->ESW_ENGSAL & 0xff, (fecp->ESW_ENGSAL >> 8) & 0xff,
-+ (fecp->ESW_ENGSAL >> 16) & 0xff,
-+ (fecp->ESW_ENGSAL >> 24) & 0xff,
-+ fecp->ESW_ENGSAH & 0xff,
-+ (fecp->ESW_ENGSAH >> 8) & 0xff);
-+ if ((fecp->ESW_MCR >> 8) & 1)
-+ printk("Ingress Des Address to be mirrored: "
-+ "%02lx-%02lx-%02lx-%02lx-%02lx-%02lx\n",
-+ fecp->ESW_INGDAL & 0xff, (fecp->ESW_INGDAL >> 8) & 0xff,
-+ (fecp->ESW_INGDAL >> 16) & 0xff,
-+ (fecp->ESW_INGDAL >> 24) & 0xff,
-+ fecp->ESW_INGDAH & 0xff,
-+ (fecp->ESW_INGDAH >> 8) & 0xff);
-+ if ((fecp->ESW_MCR >> 7) & 1)
-+ printk("Ingress Src Address to be mirrored: "
-+ "%02lx-%02lx-%02lx-%02lx-%02lx-%02lx\n",
-+ fecp->ESW_INGSAL & 0xff, (fecp->ESW_INGSAL >> 8) & 0xff,
-+ (fecp->ESW_INGSAL >> 16) & 0xff,
-+ (fecp->ESW_INGSAL >> 24) & 0xff,
-+ fecp->ESW_INGSAH & 0xff,
-+ (fecp->ESW_INGSAH >> 8) & 0xff);
-+}
-+
-+int esw_port_mirroring_config_port_match(struct switch_enet_private *fep,
-+ int mirror_port, int port_match_en, int port)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long tmp = 0;
-+
-+ fecp = fep->hwp;
-+
-+ tmp = fecp->ESW_MCR;
-+ if (mirror_port != (tmp & 0xf))
-+ tmp = 0;
-+
-+ switch (port_match_en) {
-+ case MIRROR_EGRESS_PORT_MATCH:
-+ tmp |= MCF_ESW_MCR_EGMAP;
-+ if (port == 0)
-+ fecp->ESW_EGMAP = MCF_ESW_EGMAP_EG0;
-+ else if (port == 1)
-+ fecp->ESW_EGMAP = MCF_ESW_EGMAP_EG1;
-+ else if (port == 2)
-+ fecp->ESW_EGMAP = MCF_ESW_EGMAP_EG2;
-+ break;
-+ case MIRROR_INGRESS_PORT_MATCH:
-+ tmp |= MCF_ESW_MCR_INGMAP;
-+ if (port == 0)
-+ fecp->ESW_INGMAP = MCF_ESW_INGMAP_ING0;
-+ else if (port == 1)
-+ fecp->ESW_INGMAP = MCF_ESW_INGMAP_ING1;
-+ else if (port == 2)
-+ fecp->ESW_INGMAP = MCF_ESW_INGMAP_ING2;
-+ break;
-+ default:
-+ tmp = 0;
-+ break;
-+ }
-+
-+ tmp = tmp & 0x07e0;
-+ if (port_match_en)
-+ tmp |= MCF_ESW_MCR_MEN | MCF_ESW_MCR_PORT(mirror_port);
-+
-+ fecp->ESW_MCR = tmp;
-+ return 0;
-+}
-+
-+int esw_port_mirroring_config(struct switch_enet_private *fep,
-+ int mirror_port, int port, int mirror_enable,
-+ unsigned char *src_mac, unsigned char *des_mac,
-+ int egress_en, int ingress_en,
-+ int egress_mac_src_en, int egress_mac_des_en,
-+ int ingress_mac_src_en, int ingress_mac_des_en)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long tmp;
-+
-+ fecp = fep->hwp;
-+
-+ /*mirroring config*/
-+ tmp = 0;
-+ if (egress_en == 1) {
-+ tmp |= MCF_ESW_MCR_EGMAP;
-+ if (port == 0)
-+ fecp->ESW_EGMAP = MCF_ESW_EGMAP_EG0;
-+ else if (port == 1)
-+ fecp->ESW_EGMAP = MCF_ESW_EGMAP_EG1;
-+ else if (port == 2)
-+ fecp->ESW_EGMAP = MCF_ESW_EGMAP_EG2;
-+ else {
-+ printk(KERN_ERR "%s: the port %x we do not support\n",
-+ __func__, port);
-+ return -1;
-+ }
-+ } else if (egress_en == 0) {
-+ tmp &= (~MCF_ESW_MCR_EGMAP);
-+ } else {
-+ printk(KERN_ERR "%s: egress_en %x we do not support\n",
-+ __func__, egress_en);
-+ return -1;
-+ }
-+
-+ if (ingress_en == 1) {
-+ tmp |= MCF_ESW_MCR_INGMAP;
-+ if (port == 0)
-+ fecp->ESW_INGMAP = MCF_ESW_INGMAP_ING0;
-+ else if (port == 1)
-+ fecp->ESW_INGMAP = MCF_ESW_INGMAP_ING1;
-+ else if (port == 2)
-+ fecp->ESW_INGMAP = MCF_ESW_INGMAP_ING2;
-+ else {
-+ printk(KERN_ERR "%s: the port %x we do not support\n",
-+ __func__, port);
-+ return -1;
-+ }
-+ } else if (ingress_en == 0) {
-+ tmp &= ~MCF_ESW_MCR_INGMAP;
-+ } else{
-+ printk(KERN_ERR "%s: ingress_en %x we do not support\n",
-+ __func__, ingress_en);
-+ return -1;
-+ }
-+
-+ if (egress_mac_src_en == 1) {
-+ tmp |= MCF_ESW_MCR_EGSA;
-+ fecp->ESW_ENGSAH = (src_mac[5] << 8) | (src_mac[4]);
-+ fecp->ESW_ENGSAL = (unsigned long)((src_mac[3] << 24) |
-+ (src_mac[2] << 16) |
-+ (src_mac[1] << 8) |
-+ src_mac[0]);
-+ } else if (egress_mac_src_en == 0) {
-+ tmp &= ~MCF_ESW_MCR_EGSA;
-+ } else {
-+ printk(KERN_ERR "%s: egress_mac_src_en %x we do not support\n",
-+ __func__, egress_mac_src_en);
-+ return -1;
-+ }
-+
-+ if (egress_mac_des_en == 1) {
-+ tmp |= MCF_ESW_MCR_EGDA;
-+ fecp->ESW_ENGDAH = (des_mac[5] << 8) | (des_mac[4]);
-+ fecp->ESW_ENGDAL = (unsigned long)((des_mac[3] << 24) |
-+ (des_mac[2] << 16) |
-+ (des_mac[1] << 8) |
-+ des_mac[0]);
-+ } else if (egress_mac_des_en == 0) {
-+ tmp &= ~MCF_ESW_MCR_EGDA;
-+ } else {
-+ printk(KERN_ERR "%s: egress_mac_des_en %x we do not support\n",
-+ __func__, egress_mac_des_en);
-+ return -1;
-+ }
-+
-+ if (ingress_mac_src_en == 1) {
-+ tmp |= MCF_ESW_MCR_INGSA;
-+ fecp->ESW_INGSAH = (src_mac[5] << 8) | (src_mac[4]);
-+ fecp->ESW_INGSAL = (unsigned long)((src_mac[3] << 24) |
-+ (src_mac[2] << 16) |
-+ (src_mac[1] << 8) |
-+ src_mac[0]);
-+ } else if (ingress_mac_src_en == 0) {
-+ tmp &= ~MCF_ESW_MCR_INGSA;
-+ } else {
-+ printk(KERN_ERR "%s: ingress_mac_src_en %x we do not support\n",
-+ __func__, ingress_mac_src_en);
-+ return -1;
-+ }
-+
-+ if (ingress_mac_des_en == 1) {
-+ tmp |= MCF_ESW_MCR_INGDA;
-+ fecp->ESW_INGDAH = (des_mac[5] << 8) | (des_mac[4]);
-+ fecp->ESW_INGDAL = (unsigned long)((des_mac[3] << 24) |
-+ (des_mac[2] << 16) |
-+ (des_mac[1] << 8) |
-+ des_mac[0]);
-+ } else if (ingress_mac_des_en == 0) {
-+ tmp &= ~MCF_ESW_MCR_INGDA;
-+ } else {
-+ printk(KERN_ERR "%s: ingress_mac_des_en %x we do not support\n",
-+ __func__, ingress_mac_des_en);
-+ return -1;
-+ }
-+
-+ if (mirror_enable == 1)
-+ tmp |= MCF_ESW_MCR_MEN | MCF_ESW_MCR_PORT(mirror_port);
-+ else if (mirror_enable == 0)
-+ tmp &= ~MCF_ESW_MCR_MEN;
-+ else
-+ printk(KERN_ERR "%s: the mirror enable %x is error\n",
-+ __func__, mirror_enable);
-+
-+
-+ fecp->ESW_MCR = tmp;
-+ return 0;
-+}
-+
-+int esw_port_mirroring_config_addr_match(struct switch_enet_private *fep,
-+ int mirror_port, int addr_match_enable, unsigned char *mac_addr)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long tmp = 0;
-+
-+ fecp = fep->hwp;
-+
-+ tmp = fecp->ESW_MCR;
-+ if (mirror_port != (tmp & 0xf))
-+ tmp = 0;
-+
-+ switch (addr_match_enable) {
-+ case MIRROR_EGRESS_SOURCE_MATCH:
-+ tmp |= MCF_ESW_MCR_EGSA;
-+ fecp->ESW_ENGSAH = (mac_addr[5] << 8) | (mac_addr[4]);
-+ fecp->ESW_ENGSAL = (unsigned long)((mac_addr[3] << 24) |
-+ (mac_addr[2] << 16) | (mac_addr[1] << 8) | mac_addr[0]);
-+ break;
-+ case MIRROR_INGRESS_SOURCE_MATCH:
-+ tmp |= MCF_ESW_MCR_INGSA;
-+ fecp->ESW_INGSAH = (mac_addr[5] << 8) | (mac_addr[4]);
-+ fecp->ESW_INGSAL = (unsigned long)((mac_addr[3] << 24) |
-+ (mac_addr[2] << 16) | (mac_addr[1] << 8) | mac_addr[0]);
-+ break;
-+ case MIRROR_EGRESS_DESTINATION_MATCH:
-+ tmp |= MCF_ESW_MCR_EGDA;
-+ fecp->ESW_ENGDAH = (mac_addr[5] << 8) | (mac_addr[4]);
-+ fecp->ESW_ENGDAL = (unsigned long)((mac_addr[3] << 24) |
-+ (mac_addr[2] << 16) | (mac_addr[1] << 8) | mac_addr[0]);
-+ break;
-+ case MIRROR_INGRESS_DESTINATION_MATCH:
-+ tmp |= MCF_ESW_MCR_INGDA;
-+ fecp->ESW_INGDAH = (mac_addr[5] << 8) | (mac_addr[4]);
-+ fecp->ESW_INGDAL = (unsigned long)((mac_addr[3] << 24) |
-+ (mac_addr[2] << 16) | (mac_addr[1] << 8) | mac_addr[0]);
-+ break;
-+ default:
-+ tmp = 0;
-+ break;
-+ }
-+
-+ tmp = tmp & 0x07e0;
-+ if (addr_match_enable)
-+ tmp |= MCF_ESW_MCR_MEN | MCF_ESW_MCR_PORT(mirror_port);
-+
-+ fecp->ESW_MCR = tmp;
-+ return 0;
-+}
-+
-+void esw_get_vlan_verification(struct switch_enet_private *fep,
-+ unsigned long *ulValue)
-+{
-+ volatile switch_t *fecp;
-+ fecp = fep->hwp;
-+ *ulValue = fecp->ESW_VLANV;
-+}
-+
-+int esw_set_vlan_verification(struct switch_enet_private *fep, int port,
-+ int vlan_domain_verify_en, int vlan_discard_unknown_en)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ if ((port < 0) || (port > 2)) {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ if (vlan_domain_verify_en == 1) {
-+ if (port == 0)
-+ fecp->ESW_VLANV |= MCF_ESW_VLANV_VV0;
-+ else if (port == 1)
-+ fecp->ESW_VLANV |= MCF_ESW_VLANV_VV1;
-+ else if (port == 2)
-+ fecp->ESW_VLANV |= MCF_ESW_VLANV_VV2;
-+ } else if (vlan_domain_verify_en == 0) {
-+ if (port == 0)
-+ fecp->ESW_VLANV &= ~MCF_ESW_VLANV_VV0;
-+ else if (port == 1)
-+ fecp->ESW_VLANV &= ~MCF_ESW_VLANV_VV1;
-+ else if (port == 2)
-+ fecp->ESW_VLANV &= ~MCF_ESW_VLANV_VV2;
-+ } else {
-+ printk(KERN_INFO "%s: donot support "
-+ "vlan_domain_verify %x\n",
-+ __func__, vlan_domain_verify_en);
-+ return -2;
-+ }
-+
-+ if (vlan_discard_unknown_en == 1) {
-+ if (port == 0)
-+ fecp->ESW_VLANV |= MCF_ESW_VLANV_DU0;
-+ else if (port == 1)
-+ fecp->ESW_VLANV |= MCF_ESW_VLANV_DU1;
-+ else if (port == 2)
-+ fecp->ESW_VLANV |= MCF_ESW_VLANV_DU2;
-+ } else if (vlan_discard_unknown_en == 0) {
-+ if (port == 0)
-+ fecp->ESW_VLANV &= ~MCF_ESW_VLANV_DU0;
-+ else if (port == 1)
-+ fecp->ESW_VLANV &= ~MCF_ESW_VLANV_DU1;
-+ else if (port == 2)
-+ fecp->ESW_VLANV &= ~MCF_ESW_VLANV_DU2;
-+ } else {
-+ printk(KERN_INFO "%s: donot support "
-+ "vlan_discard_unknown %x\n",
-+ __func__, vlan_discard_unknown_en);
-+ return -3;
-+ }
-+
-+ return 0;
-+}
-+
-+void esw_get_vlan_resolution_table(struct switch_enet_private *fep,
-+ struct eswVlanTableItem *tableaddr)
-+{
-+ volatile switch_t *fecp;
-+ int vnum = 0;
-+ int i;
-+
-+ fecp = fep->hwp;
-+ for (i = 0; i < 32; i++) {
-+ if (fecp->ESW_VRES[i]) {
-+ tableaddr->table[i].port_vlanid =
-+ fecp->ESW_VRES[i] >> 3;
-+ tableaddr->table[i].vlan_domain_port =
-+ fecp->ESW_VRES[i] & 7;
-+ vnum++;
-+ }
-+ }
-+ tableaddr->valid_num = vnum;
-+}
-+
-+int esw_set_vlan_id(struct switch_enet_private *fep, unsigned long configData)
-+{
-+ volatile switch_t *fecp;
-+ int i;
-+
-+ fecp = fep->hwp;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (fecp->ESW_VRES[i] == 0) {
-+ fecp->ESW_VRES[i] = MCF_ESW_VRES_VLANID(configData);
-+ return 0;
-+ } else if (((fecp->ESW_VRES[i] >> 3) & 0xfff) == configData) {
-+ printk(KERN_INFO "The VLAN already exists\n");
-+ return 0;
-+ }
-+ }
-+
-+ printk(KERN_INFO "The VLAN can't create, because VLAN table is full\n");
-+ return 0;
-+}
-+
-+int esw_set_vlan_id_cleared(struct switch_enet_private *fep,
-+ unsigned long configData)
-+{
-+ volatile switch_t *fecp;
-+ int i;
-+
-+ fecp = fep->hwp;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (((fecp->ESW_VRES[i] >> 3) & 0xfff) == configData) {
-+ fecp->ESW_VRES[i] = 0;
-+ break;
-+ }
-+ }
-+ return 0;
-+}
-+
-+int esw_set_port_in_vlan_id(struct switch_enet_private *fep,
-+ eswIoctlVlanResoultionTable configData)
-+{
-+ volatile switch_t *fecp;
-+ int i;
-+ int lastnum = 0;
-+
-+ fecp = fep->hwp;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (fecp->ESW_VRES[i] == 0) {
-+ lastnum = i;
-+ break;
-+ } else if (((fecp->ESW_VRES[i] >> 3) & 0xfff) ==
-+ configData.port_vlanid) {
-+ /* update the port members of this vlan */
-+ fecp->ESW_VRES[i] |= 1 << configData.vlan_domain_port;
-+ return 0;
-+ }
-+ }
-+ /* creat a new vlan in vlan table */
-+ fecp->ESW_VRES[lastnum] = MCF_ESW_VRES_VLANID(configData.port_vlanid) |
-+ (1 << configData.vlan_domain_port);
-+ return 0;
-+}
-+
-+int esw_set_vlan_resolution_table(struct switch_enet_private *fep,
-+ unsigned short port_vlanid, int vlan_domain_num,
-+ int vlan_domain_port)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ if ((vlan_domain_num < 0)
-+ || (vlan_domain_num > 31)) {
-+ printk(KERN_ERR "%s: do not support the "
-+ "vlan_domain_num %d\n",
-+ __func__, vlan_domain_num);
-+ return -1;
-+ }
-+
-+ if ((vlan_domain_port < 0)
-+ || (vlan_domain_port > 7)) {
-+ printk(KERN_ERR "%s: do not support the "
-+ "vlan_domain_port %d\n",
-+ __func__, vlan_domain_port);
-+ return -2;
-+ }
-+
-+ fecp->ESW_VRES[vlan_domain_num] =
-+ MCF_ESW_VRES_VLANID(port_vlanid)
-+ | vlan_domain_port;
-+
-+ return 0;
-+}
-+
-+void esw_get_vlan_input_config(struct switch_enet_private *fep,
-+ eswIoctlVlanInputStatus *pVlanInputConfig)
-+{
-+ volatile switch_t *fecp;
-+ int i;
-+
-+ fecp = fep->hwp;
-+ for (i = 0; i < 3; i++)
-+ pVlanInputConfig->ESW_PID[i] = fecp->ESW_PID[i];
-+
-+ pVlanInputConfig->ESW_VLANV = fecp->ESW_VLANV;
-+ pVlanInputConfig->ESW_VIMSEL = fecp->ESW_VIMSEL;
-+ pVlanInputConfig->ESW_VIMEN = fecp->ESW_VIMEN;
-+
-+ for (i = 0; i < 32; i++)
-+ pVlanInputConfig->ESW_VRES[i] = fecp->ESW_VRES[i];
-+}
-+
-+
-+int esw_vlan_input_process(struct switch_enet_private *fep,
-+ int port, int mode, unsigned short port_vlanid)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if ((mode < 0) || (mode > 5)) {
-+ printk(KERN_ERR "%s: do not support the"
-+ " VLAN input processing mode %d\n",
-+ __func__, mode);
-+ return -1;
-+ }
-+
-+ if ((port < 0) || (port > 3)) {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, mode);
-+ return -2;
-+ }
-+
-+ fecp->ESW_PID[port] = MCF_ESW_PID_VLANID(port_vlanid);
-+ if (port == 0) {
-+ if (mode == 4)
-+ fecp->ESW_VIMEN &= ~MCF_ESW_VIMEN_EN0;
-+ else
-+ fecp->ESW_VIMEN |= MCF_ESW_VIMEN_EN0;
-+
-+ fecp->ESW_VIMSEL &= ~MCF_ESW_VIMSEL_IM0(3);
-+ fecp->ESW_VIMSEL |= MCF_ESW_VIMSEL_IM0(mode);
-+ } else if (port == 1) {
-+ if (mode == 4)
-+ fecp->ESW_VIMEN &= ~MCF_ESW_VIMEN_EN1;
-+ else
-+ fecp->ESW_VIMEN |= MCF_ESW_VIMEN_EN1;
-+
-+ fecp->ESW_VIMSEL &= ~MCF_ESW_VIMSEL_IM1(3);
-+ fecp->ESW_VIMSEL |= MCF_ESW_VIMSEL_IM1(mode);
-+ } else if (port == 2) {
-+ if (mode == 4)
-+ fecp->ESW_VIMEN &= ~MCF_ESW_VIMEN_EN2;
-+ else
-+ fecp->ESW_VIMEN |= MCF_ESW_VIMEN_EN2;
-+
-+ fecp->ESW_VIMSEL &= ~MCF_ESW_VIMSEL_IM2(3);
-+ fecp->ESW_VIMSEL |= MCF_ESW_VIMSEL_IM2(mode);
-+ } else {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, port);
-+ return -2;
-+ }
-+
-+ return 0;
-+}
-+
-+void esw_get_vlan_output_config(struct switch_enet_private *fep,
-+ unsigned long *ulVlanOutputConfig)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulVlanOutputConfig = fecp->ESW_VOMSEL;
-+}
-+
-+int esw_vlan_output_process(struct switch_enet_private *fep,
-+ int port, int mode)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if ((port < 0) || (port > 2)) {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, mode);
-+ return -1;
-+ }
-+
-+ if (port == 0) {
-+ fecp->ESW_VOMSEL &= ~MCF_ESW_VOMSEL_OM0(3);
-+ fecp->ESW_VOMSEL |= MCF_ESW_VOMSEL_OM0(mode);
-+ } else if (port == 1) {
-+ fecp->ESW_VOMSEL &= ~MCF_ESW_VOMSEL_OM1(3);
-+ fecp->ESW_VOMSEL |= MCF_ESW_VOMSEL_OM1(mode);
-+ } else if (port == 2) {
-+ fecp->ESW_VOMSEL &= ~MCF_ESW_VOMSEL_OM2(3);
-+ fecp->ESW_VOMSEL |= MCF_ESW_VOMSEL_OM2(mode);
-+ } else {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+/*------------frame calssify and priority resolution------------*/
-+/*vlan priority lookup*/
-+int esw_framecalssify_vlan_priority_lookup(struct switch_enet_private *fep,
-+ int port, int func_enable, int vlan_pri_table_num,
-+ int vlan_pri_table_value)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if ((port < 0) || (port > 3)) {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ if (func_enable == 0) {
-+ fecp->ESW_PRES[port] &= ~MCF_ESW_PRES_VLAN;
-+ printk(KERN_ERR "%s: disable port %d VLAN priority "
-+ "lookup function\n", __func__, port);
-+ return 0;
-+ }
-+
-+ if ((vlan_pri_table_num < 0) || (vlan_pri_table_num > 7)) {
-+ printk(KERN_ERR "%s: do not support the priority %d\n",
-+ __func__, vlan_pri_table_num);
-+ return -1;
-+ }
-+
-+ fecp->ESW_PVRES[port] |= ((vlan_pri_table_value & 0x3)
-+ << (vlan_pri_table_num*3));
-+ /* enable port VLAN priority lookup function*/
-+ fecp->ESW_PRES[port] |= MCF_ESW_PRES_VLAN;
-+ return 0;
-+}
-+
-+int esw_framecalssify_ip_priority_lookup(struct switch_enet_private *fep,
-+ int port, int func_enable, int ipv4_en, int ip_priority_num,
-+ int ip_priority_value)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long tmp = 0, tmp_prio = 0;
-+
-+ fecp = fep->hwp;
-+
-+ if ((port < 0) || (port > 3)) {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ if (func_enable == 0) {
-+ fecp->ESW_PRES[port] &= ~MCF_ESW_PRES_IP;
-+ printk(KERN_ERR "%s: disable port %d ip priority "
-+ "lookup function\n", __func__, port);
-+ return 0;
-+ }
-+
-+ /* IPV4 priority 64 entry table lookup*/
-+ /* IPv4 head 6 bit TOS field*/
-+ if (ipv4_en == 1) {
-+ if ((ip_priority_num < 0) || (ip_priority_num > 63)) {
-+ printk(KERN_ERR "%s: do not support the table entry %d\n",
-+ __func__, ip_priority_num);
-+ return -2;
-+ }
-+ } else { /* IPV6 priority 256 entry table lookup*/
-+ /* IPv6 head 8 bit COS field*/
-+ if ((ip_priority_num < 0) || (ip_priority_num > 255)) {
-+ printk(KERN_ERR "%s: do not support the table entry %d\n",
-+ __func__, ip_priority_num);
-+ return -3;
-+ }
-+ }
-+
-+ /* IP priority table lookup : address*/
-+ tmp = MCF_ESW_IPRES_ADDRESS(ip_priority_num);
-+ /* IP priority table lookup : ipv4sel*/
-+ if (ipv4_en == 1)
-+ tmp = tmp | MCF_ESW_IPRES_IPV4SEL;
-+ /* IP priority table lookup : priority*/
-+ if (port == 0)
-+ tmp |= MCF_ESW_IPRES_PRI0(ip_priority_value);
-+ else if (port == 1)
-+ tmp |= MCF_ESW_IPRES_PRI1(ip_priority_value);
-+ else if (port == 2)
-+ tmp |= MCF_ESW_IPRES_PRI2(ip_priority_value);
-+
-+ /* configure*/
-+ fecp->ESW_IPRES = MCF_ESW_IPRES_READ |
-+ MCF_ESW_IPRES_ADDRESS(ip_priority_num);
-+ tmp_prio = fecp->ESW_IPRES;
-+
-+ fecp->ESW_IPRES = tmp | tmp_prio;
-+
-+ fecp->ESW_IPRES = MCF_ESW_IPRES_READ |
-+ MCF_ESW_IPRES_ADDRESS(ip_priority_num);
-+ tmp_prio = fecp->ESW_IPRES;
-+
-+ /* enable port IP priority lookup function*/
-+ fecp->ESW_PRES[port] |= MCF_ESW_PRES_IP;
-+ return 0;
-+}
-+
-+int esw_framecalssify_mac_priority_lookup(
-+ struct switch_enet_private *fep, int port)
-+{
-+ volatile switch_t *fecp;
-+
-+ if ((port < 0) || (port > 3)) {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ fecp = fep->hwp;
-+ fecp->ESW_PRES[port] |= MCF_ESW_PRES_MAC;
-+
-+ return 0;
-+}
-+
-+int esw_frame_calssify_priority_init(struct switch_enet_private *fep,
-+ int port, unsigned char priority_value)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if ((port < 0) || (port > 3)) {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, port);
-+ return -1;
-+ }
-+ /*disable all priority lookup function*/
-+ fecp->ESW_PRES[port] = 0;
-+ fecp->ESW_PRES[port] = MCF_ESW_PRES_DFLT_PRI(priority_value & 0x7);
-+
-+ return 0;
-+}
-+
-+/*---------------------------------------------------------------------------*/
-+int esw_get_statistics_status(struct switch_enet_private *fep,
-+ esw_statistics_status *pStatistics)
-+{
-+ volatile switch_t *fecp;
-+ fecp = fep->hwp;
-+
-+ pStatistics->ESW_DISCN = fecp->ESW_DISCN;
-+ pStatistics->ESW_DISCB = fecp->ESW_DISCB;
-+ pStatistics->ESW_NDISCN = fecp->ESW_NDISCN;
-+ pStatistics->ESW_NDISCB = fecp->ESW_NDISCB;
-+ return 0;
-+}
-+
-+int esw_get_port_statistics_status(struct switch_enet_private *fep,
-+ int port, esw_port_statistics_status *pPortStatistics)
-+{
-+ volatile switch_t *fecp;
-+
-+ if ((port < 0) || (port > 3)) {
-+ printk(KERN_ERR "%s: do not support the port %d\n",
-+ __func__, port);
-+ return -1;
-+ }
-+
-+ fecp = fep->hwp;
-+
-+ pPortStatistics->MCF_ESW_POQC =
-+ fecp->port_statistics_status[port].MCF_ESW_POQC;
-+ pPortStatistics->MCF_ESW_PMVID =
-+ fecp->port_statistics_status[port].MCF_ESW_PMVID;
-+ pPortStatistics->MCF_ESW_PMVTAG =
-+ fecp->port_statistics_status[port].MCF_ESW_PMVTAG;
-+ pPortStatistics->MCF_ESW_PBL =
-+ fecp->port_statistics_status[port].MCF_ESW_PBL;
-+ return 0;
-+}
-+/*----------------------------------------------------------------------*/
-+int esw_get_output_queue_status(struct switch_enet_private *fep,
-+ esw_output_queue_status *pOutputQueue)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ pOutputQueue->ESW_MMSR = fecp->ESW_MMSR;
-+ pOutputQueue->ESW_LMT = fecp->ESW_LMT;
-+ pOutputQueue->ESW_LFC = fecp->ESW_LFC;
-+ pOutputQueue->ESW_IOSR = fecp->ESW_IOSR;
-+ pOutputQueue->ESW_PCSR = fecp->ESW_PCSR;
-+ pOutputQueue->ESW_QWT = fecp->ESW_QWT;
-+ pOutputQueue->ESW_P0BCT = fecp->ESW_P0BCT;
-+ return 0;
-+}
-+
-+/* set output queue memory status and configure*/
-+int esw_set_output_queue_memory(struct switch_enet_private *fep,
-+ int fun_num, esw_output_queue_status *pOutputQueue)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if (fun_num == 1) {
-+ /* memory manager status*/
-+ fecp->ESW_MMSR = pOutputQueue->ESW_MMSR;
-+ } else if (fun_num == 2) {
-+ /*low memory threshold*/
-+ fecp->ESW_LMT = pOutputQueue->ESW_LMT;
-+ } else if (fun_num == 3) {
-+ /*lowest number of free cells*/
-+ fecp->ESW_LFC = pOutputQueue->ESW_LFC;
-+ } else if (fun_num == 4) {
-+ /*queue weights*/
-+ fecp->ESW_QWT = pOutputQueue->ESW_QWT;
-+ } else if (fun_num == 5) {
-+ /*port 0 backpressure congenstion thresled*/
-+ fecp->ESW_P0BCT = pOutputQueue->ESW_P0BCT;
-+ } else {
-+ printk(KERN_ERR "%s: do not support the cmd %x\n",
-+ __func__, fun_num);
-+ return -1;
-+ }
-+ return 0;
-+}
-+/*--------------------------------------------------------------------*/
-+int esw_get_irq_status(struct switch_enet_private *fep,
-+ eswIoctlIrqStatus *pIrqStatus)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ pIrqStatus->isr = fecp->switch_ievent;
-+ pIrqStatus->imr = fecp->switch_imask;
-+ pIrqStatus->rx_buf_pointer = fecp->fec_r_des_start;
-+ pIrqStatus->tx_buf_pointer = fecp->fec_x_des_start;
-+ pIrqStatus->rx_max_size = fecp->fec_r_buff_size;
-+ pIrqStatus->rx_buf_active = fecp->fec_r_des_active;
-+ pIrqStatus->tx_buf_active = fecp->fec_x_des_active;
-+ return 0;
-+}
-+
-+int esw_set_irq_mask(struct switch_enet_private *fep,
-+ unsigned long mask, int enable)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+
-+ if (enable == 1)
-+ fecp->switch_imask |= mask;
-+ else if (enable == 1)
-+ fecp->switch_imask &= (~mask);
-+ else {
-+ printk(KERN_INFO "%s: enable %lx is error value\n",
-+ __func__, mask);
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+void esw_clear_irq_event(struct switch_enet_private *fep,
-+ unsigned long mask)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ fecp->switch_ievent |= mask;
-+}
-+
-+void esw_get_switch_mode(struct switch_enet_private *fep,
-+ unsigned long *ulModeConfig)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulModeConfig = fecp->ESW_MODE;
-+}
-+
-+void esw_switch_mode_configure(struct switch_enet_private *fep,
-+ unsigned long configure)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ fecp->ESW_MODE |= configure;
-+}
-+
-+void esw_get_bridge_port(struct switch_enet_private *fep,
-+ unsigned long *ulBMPConfig)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ *ulBMPConfig = fecp->ESW_BMPC;
-+}
-+
-+void esw_bridge_port_configure(struct switch_enet_private *fep,
-+ unsigned long configure)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ fecp->ESW_BMPC = configure;
-+}
-+
-+int esw_get_port_all_status(struct switch_enet_private *fep,
-+ unsigned char portnum, struct port_all_status *port_alstatus)
-+{
-+ volatile switch_t *fecp;
-+ unsigned long PortBlocking;
-+ unsigned long PortLearning;
-+ unsigned long VlanVerify;
-+ unsigned long DiscardUnknown;
-+ unsigned long MultiReso;
-+ unsigned long BroadReso;
-+ unsigned long FTransmit;
-+ unsigned long FReceive;
-+
-+ fecp = fep->hwp;
-+ PortBlocking = fecp->ESW_BKLR & 0x0000000f;
-+ PortLearning = (fecp->ESW_BKLR & 0x000f0000) >> 16;
-+ VlanVerify = fecp->ESW_VLANV & 0x0000000f;
-+ DiscardUnknown = (fecp->ESW_VLANV & 0x000f0000) >> 16;
-+ MultiReso = fecp->ESW_DMCR & 0x0000000f;
-+ BroadReso = fecp->ESW_DBCR & 0x0000000f;
-+ FTransmit = fecp->ESW_PER & 0x0000000f;
-+ FReceive = (fecp->ESW_PER & 0x000f0000) >> 16;
-+
-+ switch (portnum) {
-+ case 0:
-+ port_alstatus->link_status = 1;
-+ port_alstatus->block_status = PortBlocking & 1;
-+ port_alstatus->learn_status = PortLearning & 1;
-+ port_alstatus->vlan_verify = VlanVerify & 1;
-+ port_alstatus->discard_unknown = DiscardUnknown & 1;
-+ port_alstatus->multi_reso = MultiReso & 1;
-+ port_alstatus->broad_reso = BroadReso & 1;
-+ port_alstatus->ftransmit = FTransmit & 1;
-+ port_alstatus->freceive = FReceive & 1;
-+ break;
-+ case 1:
-+ port_alstatus->link_status =
-+ ports_link_status.port1_link_status;
-+ port_alstatus->block_status = (PortBlocking >> 1) & 1;
-+ port_alstatus->learn_status = (PortLearning >> 1) & 1;
-+ port_alstatus->vlan_verify = (VlanVerify >> 1) & 1;
-+ port_alstatus->discard_unknown = (DiscardUnknown >> 1) & 1;
-+ port_alstatus->multi_reso = (MultiReso >> 1) & 1;
-+ port_alstatus->broad_reso = (BroadReso >> 1) & 1;
-+ port_alstatus->ftransmit = (FTransmit >> 1) & 1;
-+ port_alstatus->freceive = (FReceive >> 1) & 1;
-+ break;
-+ case 2:
-+ port_alstatus->link_status =
-+ ports_link_status.port2_link_status;
-+ port_alstatus->block_status = (PortBlocking >> 2) & 1;
-+ port_alstatus->learn_status = (PortLearning >> 2) & 1;
-+ port_alstatus->vlan_verify = (VlanVerify >> 2) & 1;
-+ port_alstatus->discard_unknown = (DiscardUnknown >> 2) & 1;
-+ port_alstatus->multi_reso = (MultiReso >> 2) & 1;
-+ port_alstatus->broad_reso = (BroadReso >> 2) & 1;
-+ port_alstatus->ftransmit = (FTransmit >> 2) & 1;
-+ port_alstatus->freceive = (FReceive >> 2) & 1;
-+ break;
-+ default:
-+ printk(KERN_ERR "%s:do not support the port %d",
-+ __func__, portnum);
-+ break;
-+ }
-+ return 0;
-+}
-+
-+int esw_atable_get_entry_port_number(struct switch_enet_private *fep,
-+ unsigned char *mac_addr, unsigned char *port)
-+{
-+ int block_index, block_index_end, entry;
-+ unsigned long read_lo, read_hi;
-+ unsigned long mac_addr_lo, mac_addr_hi;
-+
-+ mac_addr_lo = (unsigned long)((mac_addr[3]<<24) | (mac_addr[2]<<16) |
-+ (mac_addr[1]<<8) | mac_addr[0]);
-+ mac_addr_hi = (unsigned long)((mac_addr[5]<<8) | (mac_addr[4]));
-+
-+ block_index = GET_BLOCK_PTR(crc8_calc(mac_addr));
-+ block_index_end = block_index + ATABLE_ENTRY_PER_SLOT;
-+
-+ /* now search all the entries in the selected block */
-+ for (entry = block_index; entry < block_index_end; entry++) {
-+ read_atable(fep, entry, &read_lo, &read_hi);
-+ if ((read_lo == mac_addr_lo) &&
-+ ((read_hi & 0x0000ffff) ==
-+ (mac_addr_hi & 0x0000ffff))) {
-+ /* found the correct address */
-+ if ((read_hi & (1 << 16)) && (!(read_hi & (1 << 17))))
-+ *port = AT_EXTRACT_PORT(read_hi);
-+ break;
-+ } else
-+ *port = -1;
-+ }
-+
-+ return 0;
-+}
-+
-+int esw_get_mac_address_lookup_table(struct switch_enet_private *fep,
-+ unsigned long *tableaddr, unsigned long *dnum, unsigned long *snum)
-+{
-+ unsigned long read_lo, read_hi;
-+ unsigned long entry;
-+ unsigned long dennum = 0;
-+ unsigned long sennum = 0;
-+
-+ for (entry = 0; entry < ESW_ATABLE_MEM_NUM_ENTRIES; entry++) {
-+ read_atable(fep, entry, &read_lo, &read_hi);
-+ if ((read_hi & (1 << 17)) && (read_hi & (1 << 16))) {
-+ /* static entry */
-+ *(tableaddr + (2047 - sennum) * 11) = entry;
-+ *(tableaddr + (2047 - sennum) * 11 + 2) =
-+ read_lo & 0x000000ff;
-+ *(tableaddr + (2047 - sennum) * 11 + 3) =
-+ (read_lo & 0x0000ff00) >> 8;
-+ *(tableaddr + (2047 - sennum) * 11 + 4) =
-+ (read_lo & 0x00ff0000) >> 16;
-+ *(tableaddr + (2047 - sennum) * 11 + 5) =
-+ (read_lo & 0xff000000) >> 24;
-+ *(tableaddr + (2047 - sennum) * 11 + 6) =
-+ read_hi & 0x000000ff;
-+ *(tableaddr + (2047 - sennum) * 11 + 7) =
-+ (read_hi & 0x0000ff00) >> 8;
-+ *(tableaddr + (2047 - sennum) * 11 + 8) =
-+ AT_EXTRACT_PORTMASK(read_hi);
-+ *(tableaddr + (2047 - sennum) * 11 + 9) =
-+ AT_EXTRACT_PRIO(read_hi);
-+ sennum++;
-+ } else if ((read_hi & (1 << 16)) && (!(read_hi & (1 << 17)))) {
-+ /* dynamic entry */
-+ *(tableaddr + dennum * 11) = entry;
-+ *(tableaddr + dennum * 11 + 2) = read_lo & 0xff;
-+ *(tableaddr + dennum * 11 + 3) =
-+ (read_lo & 0x0000ff00) >> 8;
-+ *(tableaddr + dennum * 11 + 4) =
-+ (read_lo & 0x00ff0000) >> 16;
-+ *(tableaddr + dennum * 11 + 5) =
-+ (read_lo & 0xff000000) >> 24;
-+ *(tableaddr + dennum * 11 + 6) = read_hi & 0xff;
-+ *(tableaddr + dennum * 11 + 7) =
-+ (read_hi & 0x0000ff00) >> 8;
-+ *(tableaddr + dennum * 11 + 8) =
-+ AT_EXTRACT_PORT(read_hi);
-+ *(tableaddr + dennum * 11 + 9) =
-+ AT_EXTRACT_TIMESTAMP(read_hi);
-+ dennum++;
-+ }
-+ }
-+
-+ *dnum = dennum;
-+ *snum = sennum;
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------------*/
-+/* The timer should create an interrupt every 4 seconds*/
-+static void l2switch_aging_timer(unsigned long data)
-+{
-+ struct switch_enet_private *fep;
-+
-+ fep = (struct switch_enet_private *)data;
-+
-+ if (fep) {
-+ TIMEINCREMENT(fep->currTime);
-+ fep->timeChanged++;
-+ }
-+
-+ mod_timer(&fep->timer_aging, jiffies + LEARNING_AGING_TIMER);
-+}
-+
-+/* ----------------------------------------------------------------------- */
-+void esw_check_rxb_txb_interrupt(struct switch_enet_private *fep)
-+{
-+ volatile switch_t *fecp;
-+ fecp = fep->hwp;
-+
-+ /*Enable Forced forwarding for port 1*/
-+ fecp->ESW_P0FFEN = MCF_ESW_P0FFEN_FEN |
-+ MCF_ESW_P0FFEN_FD(1);
-+ /*Disable learning for all ports*/
-+ MCF_ESW_IMR = MCF_ESW_IMR_TXB | MCF_ESW_IMR_TXF |
-+ MCF_ESW_IMR_RXB | MCF_ESW_IMR_RXF;
-+}
-+
-+/*----------------------------------------------------------------*/
-+static int switch_enet_learning(void *arg)
-+{
-+ struct switch_enet_private *fep = arg;
-+ volatile switch_t *fecp;
-+
-+ fecp = fep->hwp;
-+ while (!kthread_should_stop()) {
-+ set_current_state(TASK_INTERRUPTIBLE);
-+
-+ /* check learning record valid */
-+ if (fecp->ESW_LSR)
-+ esw_atable_dynamicms_learn_migration(fep,
-+ fep->currTime);
-+ else
-+ schedule_timeout(HZ/100);
-+ }
-+
-+ return 0;
-+}
-+
-+static int switch_enet_ioctl(struct net_device *dev,
-+ struct ifreq *ifr, int cmd)
-+{
-+ struct switch_enet_private *fep = netdev_priv(dev);
-+ volatile switch_t *fecp;
-+ int ret = 0;
-+
-+ fecp = (volatile switch_t *)dev->base_addr;
-+
-+ switch (cmd) {
-+ /*------------------------------------------------------------*/
-+ case ESW_SET_PORTENABLE_CONF:
-+ {
-+ eswIoctlPortEnableConfig configData;
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data,
-+ sizeof(eswIoctlPortEnableConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_port_enable_config(fep,
-+ configData.port,
-+ configData.tx_enable,
-+ configData.rx_enable);
-+ }
-+ break;
-+ case ESW_SET_BROADCAST_CONF:
-+ {
-+ eswIoctlPortConfig configData;
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPortConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_port_broadcast_config(fep,
-+ configData.port, configData.enable);
-+ }
-+ break;
-+
-+ case ESW_SET_MULTICAST_CONF:
-+ {
-+ eswIoctlPortConfig configData;
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPortConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_port_multicast_config(fep,
-+ configData.port, configData.enable);
-+ }
-+ break;
-+
-+ case ESW_SET_BLOCKING_CONF:
-+ {
-+ eswIoctlPortConfig configData;
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPortConfig));
-+
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_port_blocking_config(fep,
-+ configData.port, configData.enable);
-+ }
-+ break;
-+
-+ case ESW_SET_LEARNING_CONF:
-+ {
-+ eswIoctlPortConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPortConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_port_learning_config(fep,
-+ configData.port, configData.enable);
-+ }
-+ break;
-+
-+ case ESW_SET_PORT_ENTRY_EMPTY:
-+ {
-+ unsigned long portnum;
-+
-+ ret = copy_from_user(&portnum,
-+ ifr->ifr_data, sizeof(portnum));
-+ if (ret)
-+ return -EFAULT;
-+ esw_atable_dynamicms_del_entries_for_port(fep, portnum);
-+ }
-+ break;
-+
-+ case ESW_SET_OTHER_PORT_ENTRY_EMPTY:
-+ {
-+ unsigned long portnum;
-+
-+ ret = copy_from_user(&portnum,
-+ ifr->ifr_data, sizeof(portnum));
-+ if (ret)
-+ return -EFAULT;
-+
-+ esw_atable_dynamicms_del_entries_for_other_port(fep, portnum);
-+ }
-+ break;
-+
-+ case ESW_SET_IP_SNOOP_CONF:
-+ {
-+ eswIoctlIpsnoopConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlIpsnoopConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_ip_snoop_config(fep, configData.mode,
-+ configData.ip_header_protocol);
-+ }
-+ break;
-+
-+ case ESW_SET_PORT_SNOOP_CONF:
-+ {
-+ eswIoctlPortsnoopConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPortsnoopConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_tcpudp_port_snoop_config(fep, configData.mode,
-+ configData.compare_port,
-+ configData.compare_num);
-+ }
-+ break;
-+
-+ case ESW_SET_PORT_MIRROR_CONF_PORT_MATCH:
-+ {
-+ struct eswIoctlMirrorCfgPortMatch configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(configData));
-+ if (ret)
-+ return -EFAULT;
-+ ret = esw_port_mirroring_config_port_match(fep,
-+ configData.mirror_port, configData.port_match_en,
-+ configData.port);
-+ }
-+ break;
-+
-+ case ESW_SET_PORT_MIRROR_CONF:
-+ {
-+ eswIoctlPortMirrorConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPortMirrorConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_port_mirroring_config(fep,
-+ configData.mirror_port, configData.port,
-+ configData.mirror_enable,
-+ configData.src_mac, configData.des_mac,
-+ configData.egress_en, configData.ingress_en,
-+ configData.egress_mac_src_en,
-+ configData.egress_mac_des_en,
-+ configData.ingress_mac_src_en,
-+ configData.ingress_mac_des_en);
-+ }
-+ break;
-+
-+ case ESW_SET_PORT_MIRROR_CONF_ADDR_MATCH:
-+ {
-+ struct eswIoctlMirrorCfgAddrMatch configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(configData));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_port_mirroring_config_addr_match(fep,
-+ configData.mirror_port, configData.addr_match_en,
-+ configData.mac_addr);
-+ }
-+ break;
-+
-+ case ESW_SET_PIRORITY_VLAN:
-+ {
-+ eswIoctlPriorityVlanConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPriorityVlanConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_framecalssify_vlan_priority_lookup(fep,
-+ configData.port, configData.func_enable,
-+ configData.vlan_pri_table_num,
-+ configData.vlan_pri_table_value);
-+ }
-+ break;
-+
-+ case ESW_SET_PIRORITY_IP:
-+ {
-+ eswIoctlPriorityIPConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPriorityIPConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_framecalssify_ip_priority_lookup(fep,
-+ configData.port, configData.func_enable,
-+ configData.ipv4_en, configData.ip_priority_num,
-+ configData.ip_priority_value);
-+ }
-+ break;
-+
-+ case ESW_SET_PIRORITY_MAC:
-+ {
-+ eswIoctlPriorityMacConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPriorityMacConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_framecalssify_mac_priority_lookup(fep,
-+ configData.port);
-+ }
-+ break;
-+
-+ case ESW_SET_PIRORITY_DEFAULT:
-+ {
-+ eswIoctlPriorityDefaultConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlPriorityDefaultConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_frame_calssify_priority_init(fep,
-+ configData.port, configData.priority_value);
-+ }
-+ break;
-+
-+ case ESW_SET_P0_FORCED_FORWARD:
-+ {
-+ eswIoctlP0ForcedForwardConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlP0ForcedForwardConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_forced_forward(fep, configData.port1,
-+ configData.port2, configData.enable);
-+ }
-+ break;
-+
-+ case ESW_SET_BRIDGE_CONFIG:
-+ {
-+ unsigned long configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+
-+ esw_bridge_port_configure(fep, configData);
-+ }
-+ break;
-+
-+ case ESW_SET_SWITCH_MODE:
-+ {
-+ unsigned long configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+
-+ esw_switch_mode_configure(fep, configData);
-+ }
-+ break;
-+
-+ case ESW_SET_OUTPUT_QUEUE_MEMORY:
-+ {
-+ eswIoctlOutputQueue configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlOutputQueue));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_set_output_queue_memory(fep,
-+ configData.fun_num, &configData.sOutputQueue);
-+ }
-+ break;
-+
-+ case ESW_SET_VLAN_OUTPUT_PROCESS:
-+ {
-+ eswIoctlVlanOutputConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlVlanOutputConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_vlan_output_process(fep,
-+ configData.port, configData.mode);
-+ }
-+ break;
-+
-+ case ESW_SET_VLAN_INPUT_PROCESS:
-+ {
-+ eswIoctlVlanInputConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data,
-+ sizeof(eswIoctlVlanInputConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_vlan_input_process(fep, configData.port,
-+ configData.mode, configData.port_vlanid);
-+ }
-+ break;
-+
-+ case ESW_SET_VLAN_DOMAIN_VERIFICATION:
-+ {
-+ eswIoctlVlanVerificationConfig configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data,
-+ sizeof(eswIoctlVlanVerificationConfig));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_set_vlan_verification(
-+ fep, configData.port,
-+ configData.vlan_domain_verify_en,
-+ configData.vlan_discard_unknown_en);
-+ }
-+ break;
-+
-+ case ESW_SET_VLAN_RESOLUTION_TABLE:
-+ {
-+ eswIoctlVlanResoultionTable configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data,
-+ sizeof(eswIoctlVlanResoultionTable));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_set_vlan_resolution_table(
-+ fep, configData.port_vlanid,
-+ configData.vlan_domain_num,
-+ configData.vlan_domain_port);
-+
-+ }
-+ break;
-+
-+ case ESW_SET_VLAN_ID:
-+ {
-+ unsigned long configData;
-+ ret = copy_from_user(&configData, ifr->ifr_data,
-+ sizeof(configData));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_set_vlan_id(fep, configData);
-+ }
-+ break;
-+
-+ case ESW_SET_VLAN_ID_CLEARED:
-+ {
-+ unsigned long configData;
-+ ret = copy_from_user(&configData, ifr->ifr_data,
-+ sizeof(configData));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_set_vlan_id_cleared(fep, configData);
-+ }
-+ break;
-+
-+ case ESW_SET_PORT_IN_VLAN_ID:
-+ {
-+ eswIoctlVlanResoultionTable configData;
-+
-+ ret = copy_from_user(&configData, ifr->ifr_data,
-+ sizeof(configData));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_set_port_in_vlan_id(fep, configData);
-+ }
-+ break;
-+
-+ /*--------------------------------------------------------------------*/
-+ case ESW_UPDATE_STATIC_MACTABLE:
-+ {
-+ eswIoctlUpdateStaticMACtable configData;
-+
-+ ret = copy_from_user(&configData,
-+ ifr->ifr_data, sizeof(eswIoctlUpdateStaticMACtable));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_update_atable_static(configData.mac_addr,
-+ configData.port, configData.priority, fep);
-+ }
-+ break;
-+
-+ case ESW_CLEAR_ALL_MACTABLE:
-+ {
-+ esw_clear_atable(fep);
-+ }
-+ break;
-+
-+ /*-------------------get----------------------------------------------*/
-+ case ESW_GET_STATISTICS_STATUS:
-+ {
-+ esw_statistics_status Statistics;
-+ esw_port_statistics_status PortSta;
-+ int i;
-+
-+ ret = esw_get_statistics_status(fep, &Statistics);
-+ if (ret != 0) {
-+ printk(KERN_ERR "%s: cmd %x fail\n", __func__, cmd);
-+ return -1;
-+ }
-+ printk(KERN_INFO "DISCN : %10ld DISCB : %10ld\n",
-+ Statistics.ESW_DISCN, Statistics.ESW_DISCB);
-+ printk(KERN_INFO "NDISCN: %10ld NDISCB: %10ld\n",
-+ Statistics.ESW_NDISCN, Statistics.ESW_NDISCB);
-+
-+ for (i = 0; i < 3; i++) {
-+ ret = esw_get_port_statistics_status(fep, i,
-+ &PortSta);
-+ if (ret != 0) {
-+ printk(KERN_ERR "%s: cmd %x fail\n",
-+ __func__, cmd);
-+ return -1;
-+ }
-+ printk(KERN_INFO "port %d: POQC : %ld\n",
-+ i, PortSta.MCF_ESW_POQC);
-+ printk(KERN_INFO " PMVID : %ld\n",
-+ PortSta.MCF_ESW_PMVID);
-+ printk(KERN_INFO " PMVTAG: %ld\n",
-+ PortSta.MCF_ESW_PMVTAG);
-+ printk(KERN_INFO " PBL : %ld\n",
-+ PortSta.MCF_ESW_PBL);
-+ }
-+ }
-+ break;
-+
-+ case ESW_GET_LEARNING_CONF:
-+ {
-+ unsigned long PortLearning;
-+
-+ esw_get_port_learning(fep, &PortLearning);
-+ ret = copy_to_user(ifr->ifr_data, &PortLearning,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_BLOCKING_CONF:
-+ {
-+ unsigned long PortBlocking;
-+
-+ esw_get_port_blocking(fep, &PortBlocking);
-+ ret = copy_to_user(ifr->ifr_data, &PortBlocking,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_MULTICAST_CONF:
-+ {
-+ unsigned long PortMulticast;
-+
-+ esw_get_port_multicast(fep, &PortMulticast);
-+ ret = copy_to_user(ifr->ifr_data, &PortMulticast,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_BROADCAST_CONF:
-+ {
-+ unsigned long PortBroadcast;
-+
-+ esw_get_port_broadcast(fep, &PortBroadcast);
-+ ret = copy_to_user(ifr->ifr_data, &PortBroadcast,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_PORTENABLE_CONF:
-+ {
-+ unsigned long PortEnable;
-+
-+ esw_get_port_enable(fep, &PortEnable);
-+ ret = copy_to_user(ifr->ifr_data, &PortEnable,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_IP_SNOOP_CONF:
-+ {
-+ unsigned long ESW_IPSNP[8];
-+ int i;
-+
-+ esw_get_ip_snoop_config(fep, (unsigned long *)ESW_IPSNP);
-+ printk(KERN_INFO "IP Protocol Mode Type\n");
-+ for (i = 0; i < 8; i++) {
-+ if (ESW_IPSNP[i] != 0)
-+ printk(KERN_INFO "%3ld "
-+ "%1ld %s\n",
-+ (ESW_IPSNP[i] >> 8) & 0xff,
-+ (ESW_IPSNP[i] >> 1) & 3,
-+ ESW_IPSNP[i] & 1 ? "Active" :
-+ "Inactive");
-+ }
-+ }
-+ break;
-+
-+ case ESW_GET_PORT_SNOOP_CONF:
-+ {
-+ unsigned long ESW_PSNP[8];
-+ int i;
-+
-+ esw_get_tcpudp_port_snoop_config(fep,
-+ (unsigned long *)ESW_PSNP);
-+ printk(KERN_INFO "TCP/UDP Port SrcCompare DesCompare "
-+ "Mode Type\n");
-+ for (i = 0; i < 8; i++) {
-+ if (ESW_PSNP[i] != 0)
-+ printk(KERN_INFO "%5ld %s "
-+ "%s %1ld %s\n",
-+ (ESW_PSNP[i] >> 16) & 0xffff,
-+ (ESW_PSNP[i] >> 4) & 1 ? "Y" : "N",
-+ (ESW_PSNP[i] >> 3) & 1 ? "Y" : "N",
-+ (ESW_PSNP[i] >> 1) & 3,
-+ ESW_PSNP[i] & 1 ? "Active" :
-+ "Inactive");
-+ }
-+ }
-+ break;
-+
-+ case ESW_GET_PORT_MIRROR_CONF:
-+ esw_get_port_mirroring(fep);
-+ break;
-+
-+ case ESW_GET_P0_FORCED_FORWARD:
-+ {
-+ unsigned long ForceForward;
-+
-+ esw_get_forced_forward(fep, &ForceForward);
-+ ret = copy_to_user(ifr->ifr_data, &ForceForward,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_SWITCH_MODE:
-+ {
-+ unsigned long Config;
-+
-+ esw_get_switch_mode(fep, &Config);
-+ ret = copy_to_user(ifr->ifr_data, &Config,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_BRIDGE_CONFIG:
-+ {
-+ unsigned long Config;
-+
-+ esw_get_bridge_port(fep, &Config);
-+ ret = copy_to_user(ifr->ifr_data, &Config,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+ case ESW_GET_OUTPUT_QUEUE_STATUS:
-+ {
-+ esw_output_queue_status Config;
-+ esw_get_output_queue_status(fep,
-+ &Config);
-+ ret = copy_to_user(ifr->ifr_data, &Config,
-+ sizeof(esw_output_queue_status));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_VLAN_OUTPUT_PROCESS:
-+ {
-+ unsigned long Config;
-+ int tmp;
-+ int i;
-+
-+ esw_get_vlan_output_config(fep, &Config);
-+
-+ for (i = 0; i < 3; i++) {
-+ tmp = (Config >> (i << 1)) & 3;
-+
-+ if (tmp != 0)
-+ printk(KERN_INFO "port %d: vlan output "
-+ "manipulation enable (mode %d)\n",
-+ i, tmp);
-+ else
-+ printk(KERN_INFO "port %d: vlan output "
-+ "manipulation disable\n", i);
-+ }
-+ }
-+ break;
-+
-+ case ESW_GET_VLAN_INPUT_PROCESS:
-+ {
-+ eswIoctlVlanInputStatus Config;
-+ int i;
-+
-+ esw_get_vlan_input_config(fep, &Config);
-+
-+ for (i = 0; i < 3; i++) {
-+ if (((Config.ESW_VIMEN >> i) & 1) == 0)
-+ printk(KERN_INFO "port %d: vlan input "
-+ "manipulation disable\n", i);
-+ else
-+ printk("port %d: vlan input manipulation enable"
-+ " (mode %ld, vlan id %ld)\n", i,
-+ (((Config.ESW_VIMSEL >> (i << 1)) & 3)
-+ + 1), Config.ESW_PID[i]);
-+ }
-+ }
-+ break;
-+
-+ case ESW_GET_VLAN_RESOLUTION_TABLE:
-+ {
-+ struct eswVlanTableItem vtableitem;
-+ unsigned char tmp0, tmp1, tmp2;
-+ int i;
-+
-+ esw_get_vlan_resolution_table(fep, &vtableitem);
-+
-+ printk(KERN_INFO "VLAN Name VLAN Id Ports\n");
-+ for (i = 0; i < vtableitem.valid_num; i++) {
-+ tmp0 = vtableitem.table[i].vlan_domain_port & 1;
-+ tmp1 = (vtableitem.table[i].vlan_domain_port >> 1) & 1;
-+ tmp2 = (vtableitem.table[i].vlan_domain_port >> 2) & 1;
-+ printk(KERN_INFO "%2d %4d %s%s%s\n",
-+ i, vtableitem.table[i].port_vlanid,
-+ tmp0 ? "0 " : "", tmp1 ? "1 " : "",
-+ tmp2 ? "2" : "");
-+ }
-+ }
-+ break;
-+
-+ case ESW_GET_VLAN_DOMAIN_VERIFICATION:
-+ {
-+ unsigned long Config;
-+
-+ esw_get_vlan_verification(fep, &Config);
-+ ret = copy_to_user(ifr->ifr_data, &Config,
-+ sizeof(unsigned long));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_ENTRY_PORT_NUMBER:
-+ {
-+ unsigned char mac_addr[6];
-+ unsigned char portnum;
-+
-+ ret = copy_from_user(mac_addr,
-+ ifr->ifr_data, sizeof(mac_addr));
-+ if (ret)
-+ return -EFAULT;
-+
-+ ret = esw_atable_get_entry_port_number(fep, mac_addr,
-+ &portnum);
-+
-+ ret = copy_to_user(ifr->ifr_data, &portnum,
-+ sizeof(unsigned char));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_LOOKUP_TABLE:
-+ {
-+ unsigned long *ConfigData;
-+ unsigned long dennum, sennum;
-+ int i;
-+ int tmp;
-+
-+ ConfigData = kmalloc(sizeof(struct eswAddrTableEntryExample) *
-+ ESW_ATABLE_MEM_NUM_ENTRIES, GFP_KERNEL);
-+ ret = esw_get_mac_address_lookup_table(fep, ConfigData,
-+ &dennum, &sennum);
-+ printk(KERN_INFO "Dynamic entries number: %ld\n", dennum);
-+ printk(KERN_INFO "Static entries number: %ld\n", sennum);
-+ printk(KERN_INFO "Type MAC address Port Timestamp\n");
-+ for (i = 0; i < dennum; i++) {
-+ printk(KERN_INFO "dynamic "
-+ "%02lx-%02lx-%02lx-%02lx-%02lx-%02lx "
-+ "%01lx %4ld\n", *(ConfigData + i * 11 + 2),
-+ *(ConfigData + i * 11 + 3),
-+ *(ConfigData + i * 11 + 4),
-+ *(ConfigData + i * 11 + 5),
-+ *(ConfigData + i * 11 + 6),
-+ *(ConfigData + i * 11 + 7),
-+ *(ConfigData + i * 11 + 8),
-+ *(ConfigData + i * 11 + 9));
-+ }
-+
-+ if (sennum != 0)
-+ printk(KERN_INFO "Type MAC address"
-+ " Port Priority\n");
-+
-+ for (i = 0; i < sennum; i++) {
-+ printk(KERN_INFO "static %02lx-%02lx-%02lx-%02lx"
-+ "-%02lx-%02lx ",
-+ *(ConfigData + (2047 - i) * 11 + 2),
-+ *(ConfigData + (2047 - i) * 11 + 3),
-+ *(ConfigData + (2047 - i) * 11 + 4),
-+ *(ConfigData + (2047 - i) * 11 + 5),
-+ *(ConfigData + (2047 - i) * 11 + 6),
-+ *(ConfigData + (2047 - i) * 11 + 7));
-+
-+ tmp = *(ConfigData + (2047 - i) * 11 + 8);
-+ if ((tmp == 0) || (tmp == 2) || (tmp == 4))
-+ printk("%01x ", tmp >> 1);
-+ else if (tmp == 3)
-+ printk("0,1 ");
-+ else if (tmp == 5)
-+ printk("0,2 ");
-+ else if (tmp == 6)
-+ printk("1,2 ");
-+
-+ printk("%4ld\n", *(ConfigData + (2047 - i) * 11 + 9));
-+ }
-+ kfree(ConfigData);
-+ }
-+ break;
-+
-+ case ESW_GET_PORT_STATUS:
-+ {
-+ unsigned long PortBlocking;
-+
-+ esw_get_port_blocking(fep, &PortBlocking);
-+
-+ ports_link_status.port0_block_status = PortBlocking & 1;
-+ ports_link_status.port1_block_status = (PortBlocking >> 1) & 1;
-+ ports_link_status.port2_block_status = PortBlocking >> 2;
-+
-+ ret = copy_to_user(ifr->ifr_data, &ports_link_status,
-+ sizeof(ports_link_status));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+ break;
-+
-+ case ESW_GET_PORT_ALL_STATUS:
-+ {
-+ unsigned char portnum;
-+ struct port_all_status port_astatus;
-+
-+ ret = copy_from_user(&portnum,
-+ ifr->ifr_data, sizeof(portnum));
-+ if (ret)
-+ return -EFAULT;
-+
-+ esw_get_port_all_status(fep, portnum, &port_astatus);
-+ printk(KERN_INFO "Port %d status:\n", portnum);
-+ printk(KERN_INFO "Link:%-4s Blocking:%1s "
-+ "Learning:%1s\n",
-+ port_astatus.link_status ? "Up" : "Down",
-+ port_astatus.block_status ? "Y" : "N",
-+ port_astatus.learn_status ? "N" : "Y");
-+ printk(KERN_INFO "VLAN Verify:%1s Discard Unknown:%1s "
-+ "Multicast Res:%1s\n",
-+ port_astatus.vlan_verify ? "Y" : "N",
-+ port_astatus.discard_unknown ? "Y" : "N",
-+ port_astatus.multi_reso ? "Y" : "N");
-+ printk(KERN_INFO "Broadcast Res:%1s Transmit:%-7s "
-+ "Receive:%7s\n",
-+ port_astatus.broad_reso ? "Y" : "N",
-+ port_astatus.ftransmit ? "Enable" : "Disable",
-+ port_astatus.freceive ? "Enable" : "Disable");
-+
-+ }
-+ break;
-+
-+ case ESW_GET_USER_PID:
-+ {
-+ long get_pid = 0;
-+ ret = copy_from_user(&get_pid,
-+ ifr->ifr_data, sizeof(get_pid));
-+
-+ if (ret)
-+ return -EFAULT;
-+ user_pid = get_pid;
-+ }
-+ break;
-+ /*------------------------------------------------------------------*/
-+ default:
-+ return -EOPNOTSUPP;
-+ }
-+
-+ return ret;
-+}
-+
-+static netdev_tx_t switch_enet_start_xmit(struct sk_buff *skb,
-+ struct net_device *dev)
-+{
-+ struct switch_enet_private *fep;
-+ volatile switch_t *fecp;
-+ cbd_t *bdp;
-+ unsigned short status;
-+ unsigned long flags;
-+
-+ fep = netdev_priv(dev);
-+ fecp = (switch_t *)fep->hwp;
-+
-+ spin_lock_irqsave(&fep->hw_lock, flags);
-+ /* Fill in a Tx ring entry */
-+ bdp = fep->cur_tx;
-+
-+ status = bdp->cbd_sc;
-+
-+ /* Clear all of the status flags.
-+ */
-+ status &= ~BD_ENET_TX_STATS;
-+
-+ /* Set buffer length and buffer pointer.
-+ */
-+ bdp->cbd_bufaddr = __pa(skb->data);
-+ bdp->cbd_datlen = skb->len;
-+
-+ /*
-+ * On some FEC implementations data must be aligned on
-+ * 4-byte boundaries. Use bounce buffers to copy data
-+ * and get it aligned. Ugh.
-+ */
-+ if (bdp->cbd_bufaddr & 0x3) {
-+ unsigned int index1;
-+ index1 = bdp - fep->tx_bd_base;
-+
-+ memcpy(fep->tx_bounce[index1],
-+ (void *)skb->data, bdp->cbd_datlen);
-+ bdp->cbd_bufaddr = __pa(fep->tx_bounce[index1]);
-+ }
-+
-+ /* Save skb pointer. */
-+ fep->tx_skbuff[fep->skb_cur] = skb;
-+
-+ dev->stats.tx_bytes += skb->len;
-+ fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-+
-+ /* Push the data cache so the CPM does not get stale memory
-+ * data.
-+ */
-+ flush_dcache_range((unsigned long)skb->data,
-+ (unsigned long)skb->data + skb->len);
-+
-+ /* Send it on its way. Tell FEC it's ready, interrupt when done,
-+ * it's the last BD of the frame, and to put the CRC on the end.
-+ */
-+
-+ status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
-+ | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-+ bdp->cbd_sc = status;
-+ dev->trans_start = jiffies;
-+
-+ /* Trigger transmission start */
-+ fecp->fec_x_des_active = MCF_ESW_TDAR_X_DES_ACTIVE;
-+
-+ /* If this was the last BD in the ring,
-+ * start at the beginning again.*/
-+ if (status & BD_ENET_TX_WRAP)
-+ bdp = fep->tx_bd_base;
-+ else
-+ bdp++;
-+
-+ if (bdp == fep->dirty_tx) {
-+ fep->tx_full = 1;
-+ netif_stop_queue(dev);
-+ printk(KERN_ERR "%s: net stop\n", __func__);
-+ }
-+
-+ fep->cur_tx = (cbd_t *)bdp;
-+
-+ spin_unlock_irqrestore(&fep->hw_lock, flags);
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+static void switch_timeout(struct net_device *dev)
-+{
-+ struct switch_enet_private *fep = netdev_priv(dev);
-+
-+ printk(KERN_ERR "%s: transmit timed out.\n", dev->name);
-+ dev->stats.tx_errors++;
-+ switch_restart(dev, fep->full_duplex);
-+ netif_wake_queue(dev);
-+}
-+
-+/* The interrupt handler.
-+ * This is called from the MPC core interrupt.
-+ */
-+static irqreturn_t switch_enet_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = dev_id;
-+ volatile switch_t *fecp;
-+ uint int_events;
-+ irqreturn_t ret = IRQ_NONE;
-+
-+ fecp = (switch_t *)dev->base_addr;
-+
-+ /* Get the interrupt events that caused us to be here.
-+ */
-+ do {
-+ int_events = fecp->switch_ievent;
-+ fecp->switch_ievent = int_events;
-+ /* Handle receive event in its own function. */
-+
-+ /* Transmit OK, or non-fatal error. Update the buffer
-+ descriptors. Switch handles all errors, we just discover
-+ them as part of the transmit process.
-+ */
-+ if (int_events & MCF_ESW_ISR_OD0)
-+ ret = IRQ_HANDLED;
-+
-+ if (int_events & MCF_ESW_ISR_OD1)
-+ ret = IRQ_HANDLED;
-+
-+ if (int_events & MCF_ESW_ISR_OD2)
-+ ret = IRQ_HANDLED;
-+
-+ if (int_events & MCF_ESW_ISR_RXB)
-+ ret = IRQ_HANDLED;
-+
-+ if (int_events & MCF_ESW_ISR_RXF) {
-+ ret = IRQ_HANDLED;
-+ switch_enet_rx(dev);
-+ }
-+
-+ if (int_events & MCF_ESW_ISR_TXB)
-+ ret = IRQ_HANDLED;
-+
-+ if (int_events & MCF_ESW_ISR_TXF) {
-+ ret = IRQ_HANDLED;
-+ switch_enet_tx(dev);
-+ }
-+
-+ } while (int_events);
-+
-+ return ret;
-+}
-+
-+static void switch_enet_tx(struct net_device *dev)
-+{
-+ struct switch_enet_private *fep;
-+ cbd_t *bdp;
-+ unsigned short status;
-+ struct sk_buff *skb;
-+
-+ fep = netdev_priv(dev);
-+ spin_lock_irq(&fep->hw_lock);
-+ bdp = fep->dirty_tx;
-+
-+ while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
-+ if (bdp == fep->cur_tx && fep->tx_full == 0)
-+ break;
-+
-+ skb = fep->tx_skbuff[fep->skb_dirty];
-+ /* Check for errors. */
-+ if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
-+ BD_ENET_TX_RL | BD_ENET_TX_UN |
-+ BD_ENET_TX_CSL)) {
-+ dev->stats.tx_errors++;
-+ if (status & BD_ENET_TX_HB) /* No heartbeat */
-+ dev->stats.tx_heartbeat_errors++;
-+ if (status & BD_ENET_TX_LC) /* Late collision */
-+ dev->stats.tx_window_errors++;
-+ if (status & BD_ENET_TX_RL) /* Retrans limit */
-+ dev->stats.tx_aborted_errors++;
-+ if (status & BD_ENET_TX_UN) /* Underrun */
-+ dev->stats.tx_fifo_errors++;
-+ if (status & BD_ENET_TX_CSL) /* Carrier lost */
-+ dev->stats.tx_carrier_errors++;
-+ } else {
-+ dev->stats.tx_packets++;
-+ }
-+
-+ /* Deferred means some collisions occurred during transmit,
-+ * but we eventually sent the packet OK.
-+ */
-+ if (status & BD_ENET_TX_DEF)
-+ dev->stats.collisions++;
-+
-+ /* Free the sk buffer associated with this last transmit.
-+ */
-+ dev_kfree_skb_any(skb);
-+ fep->tx_skbuff[fep->skb_dirty] = NULL;
-+ fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-+
-+ /* Update pointer to next buffer descriptor to be transmitted.
-+ */
-+ if (status & BD_ENET_TX_WRAP)
-+ bdp = fep->tx_bd_base;
-+ else
-+ bdp++;
-+
-+ /* Since we have freed up a buffer, the ring is no longer
-+ * full.
-+ */
-+ if (fep->tx_full) {
-+ fep->tx_full = 0;
-+ printk(KERN_ERR "%s: tx full is zero\n", __func__);
-+ if (netif_queue_stopped(dev))
-+ netif_wake_queue(dev);
-+ }
-+ }
-+ fep->dirty_tx = (cbd_t *)bdp;
-+ spin_unlock_irq(&fep->hw_lock);
-+}
-+
-+
-+/* During a receive, the cur_rx points to the current incoming buffer.
-+ * When we update through the ring, if the next incoming buffer has
-+ * not been given to the system, we just set the empty indicator,
-+ * effectively tossing the packet.
-+ */
-+static void switch_enet_rx(struct net_device *dev)
-+{
-+ struct switch_enet_private *fep;
-+ volatile switch_t *fecp;
-+ cbd_t *bdp;
-+ unsigned short status;
-+ struct sk_buff *skb;
-+ ushort pkt_len;
-+ __u8 *data;
-+
-+ fep = netdev_priv(dev);
-+ /*fecp = (volatile switch_t *)dev->base_addr;*/
-+ fecp = (volatile switch_t *)fep->hwp;
-+
-+ spin_lock_irq(&fep->hw_lock);
-+ /* First, grab all of the stats for the incoming packet.
-+ * These get messed up if we get called due to a busy condition.
-+ */
-+ bdp = fep->cur_rx;
-+
-+ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
-+
-+ /* Since we have allocated space to hold a complete frame,
-+ * the last indicator should be set.
-+ * */
-+ if ((status & BD_ENET_RX_LAST) == 0)
-+ printk(KERN_ERR "SWITCH ENET: rcv is not +last\n");
-+
-+ if (!fep->opened)
-+ goto rx_processing_done;
-+
-+ /* Check for errors. */
-+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
-+ BD_ENET_RX_CR | BD_ENET_RX_OV)) {
-+ dev->stats.rx_errors++;
-+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
-+ /* Frame too long or too short. */
-+ dev->stats.rx_length_errors++;
-+ }
-+ if (status & BD_ENET_RX_NO) /* Frame alignment */
-+ dev->stats.rx_frame_errors++;
-+ if (status & BD_ENET_RX_CR) /* CRC Error */
-+ dev->stats.rx_crc_errors++;
-+ if (status & BD_ENET_RX_OV) /* FIFO overrun */
-+ dev->stats.rx_fifo_errors++;
-+ }
-+ /* Report late collisions as a frame error.
-+ * On this error, the BD is closed, but we don't know what we
-+ * have in the buffer. So, just drop this frame on the floor.
-+ * */
-+ if (status & BD_ENET_RX_CL) {
-+ dev->stats.rx_errors++;
-+ dev->stats.rx_frame_errors++;
-+ goto rx_processing_done;
-+ }
-+ /* Process the incoming frame */
-+ dev->stats.rx_packets++;
-+ pkt_len = bdp->cbd_datlen;
-+ dev->stats.rx_bytes += pkt_len;
-+ data = (__u8 *)__va(bdp->cbd_bufaddr);
-+
-+ /* This does 16 byte alignment, exactly what we need.
-+ * The packet length includes FCS, but we don't want to
-+ * include that when passing upstream as it messes up
-+ * bridging applications.
-+ * */
-+ skb = dev_alloc_skb(pkt_len);
-+
-+ if (skb == NULL)
-+ dev->stats.rx_dropped++;
-+ else {
-+ skb_put(skb, pkt_len); /* Make room */
-+ skb_copy_to_linear_data(skb, data, pkt_len);
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_rx(skb);
-+ }
-+rx_processing_done:
-+
-+ /* Clear the status flags for this buffer */
-+ status &= ~BD_ENET_RX_STATS;
-+
-+ /* Mark the buffer empty */
-+ status |= BD_ENET_RX_EMPTY;
-+ bdp->cbd_sc = status;
-+
-+ /* Update BD pointer to next entry */
-+ if (status & BD_ENET_RX_WRAP)
-+ bdp = fep->rx_bd_base;
-+ else
-+ bdp++;
-+
-+ /* Doing this here will keep the FEC running while we process
-+ * incoming frames. On a heavily loaded network, we should be
-+ * able to keep up at the expense of system resources.
-+ * */
-+ fecp->fec_r_des_active = MCF_ESW_RDAR_R_DES_ACTIVE;
-+ }
-+ fep->cur_rx = (cbd_t *)bdp;
-+
-+ spin_unlock_irq(&fep->hw_lock);
-+}
-+
-+static int fec_mdio_transfer(struct mii_bus *bus, int phy_id,
-+ int reg, int regval)
-+{
-+ struct net_device *dev = bus->priv;
-+ unsigned long flags;
-+ struct switch_enet_private *fep;
-+ int tries = 100;
-+ int retval = 0;
-+
-+ fep = netdev_priv(dev);
-+ spin_lock_irqsave(&fep->mii_lock, flags);
-+
-+ regval |= phy_id << 23;
-+ MCF_FEC_MMFR0 = regval;
-+
-+ /* wait for it to finish, this takes about 23 us on lite5200b */
-+ while (!(MCF_FEC_EIR0 & FEC_ENET_MII) && --tries)
-+ udelay(5);
-+
-+ if (!tries) {
-+ printk(KERN_ERR "%s timeout\n", __func__);
-+ return -ETIMEDOUT;
-+ }
-+
-+ MCF_FEC_EIR0 = FEC_ENET_MII;
-+ retval = MCF_FEC_MMFR0;
-+ spin_unlock_irqrestore(&fep->mii_lock, flags);
-+
-+ return retval;
-+}
-+
-+
-+static int coldfire_fec_mdio_read(struct mii_bus *bus,
-+ int phy_id, int reg)
-+{
-+ int ret;
-+ ret = fec_mdio_transfer(bus, phy_id, reg,
-+ mk_mii_read(reg));
-+ return ret;
-+}
-+
-+static int coldfire_fec_mdio_write(struct mii_bus *bus,
-+ int phy_id, int reg, u16 data)
-+{
-+ return fec_mdio_transfer(bus, phy_id, reg,
-+ mk_mii_write(reg, data));
-+}
-+
-+static void switch_adjust_link1(struct net_device *dev)
-+{
-+ struct switch_enet_private *priv = netdev_priv(dev);
-+ struct phy_device *phydev1 = priv->phydev[0];
-+ int new_state = 0;
-+
-+ if (phydev1->link != PHY_DOWN) {
-+ if (phydev1->duplex != priv->phy1_duplex) {
-+ new_state = 1;
-+ priv->phy1_duplex = phydev1->duplex;
-+ }
-+
-+ if (phydev1->speed != priv->phy1_speed) {
-+ new_state = 1;
-+ priv->phy1_speed = phydev1->speed;
-+ }
-+
-+ if (priv->phy1_old_link == PHY_DOWN) {
-+ new_state = 1;
-+ priv->phy1_old_link = phydev1->link;
-+ }
-+ } else if (priv->phy1_old_link) {
-+ new_state = 1;
-+ priv->phy1_old_link = PHY_DOWN;
-+ priv->phy1_speed = 0;
-+ priv->phy1_duplex = -1;
-+ }
-+
-+ if (new_state) {
-+ ports_link_status.port1_link_status = phydev1->link;
-+ if (phydev1->link == PHY_DOWN)
-+ esw_atable_dynamicms_del_entries_for_port(priv, 1);
-+
-+ /*Send the new status to user space*/
-+ if (user_pid != 1)
-+ sys_tkill(user_pid, SIGUSR1);
-+ }
-+}
-+
-+static void switch_adjust_link2(struct net_device *dev)
-+{
-+ struct switch_enet_private *priv = netdev_priv(dev);
-+ struct phy_device *phydev2 = priv->phydev[1];
-+ int new_state = 0;
-+
-+ if (phydev2->link != PHY_DOWN) {
-+ if (phydev2->duplex != priv->phy2_duplex) {
-+ new_state = 1;
-+ priv->phy2_duplex = phydev2->duplex;
-+ }
-+
-+ if (phydev2->speed != priv->phy2_speed) {
-+ new_state = 1;
-+ priv->phy2_speed = phydev2->speed;
-+ }
-+
-+ if (priv->phy2_old_link == PHY_DOWN) {
-+ new_state = 1;
-+ priv->phy2_old_link = phydev2->link;
-+ }
-+ } else if (priv->phy2_old_link) {
-+ new_state = 1;
-+ priv->phy2_old_link = PHY_DOWN;
-+ priv->phy2_speed = 0;
-+ priv->phy2_duplex = -1;
-+ }
-+
-+ if (new_state) {
-+ ports_link_status.port2_link_status = phydev2->link;
-+ if (phydev2->link == PHY_DOWN)
-+ esw_atable_dynamicms_del_entries_for_port(priv, 2);
-+
-+ /*Send the new status to user space*/
-+ if (user_pid != 1)
-+ sys_tkill(user_pid, SIGUSR1);
-+ }
-+}
-+
-+static int coldfire_switch_init_phy(struct net_device *dev)
-+{
-+ struct switch_enet_private *priv = netdev_priv(dev);
-+ struct phy_device *phydev[SWITCH_EPORT_NUMBER] = {NULL, NULL};
-+ int i, startnode = 0;
-+
-+ /* search for connect PHY device */
-+ for (i = 0; i < PHY_MAX_ADDR; i++) {
-+ struct phy_device *const tmp_phydev =
-+ priv->mdio_bus->phy_map[i];
-+
-+ if (!tmp_phydev)
-+ continue;
-+
-+#ifdef CONFIG_FEC_SHARED_PHY
-+ if (priv->index == 0)
-+ phydev[i] = tmp_phydev;
-+ else if (priv->index == 1) {
-+ if (startnode == 1) {
-+ phydev[i] = tmp_phydev;
-+ startnode = 0;
-+ } else {
-+ startnode++;
-+ continue;
-+ }
-+ } else
-+ printk(KERN_INFO "%s now we do not"
-+ "support (%d) more than"
-+ "2 phys shared "
-+ "one mdio bus\n",
-+ __func__, startnode);
-+#else
-+ phydev[i] = tmp_phydev;
-+#endif
-+ }
-+
-+ /* now we are supposed to have a proper phydev, to attach to... */
-+ if ((!phydev[0]) && (!phydev[1])) {
-+ printk(KERN_INFO "%s: Don't found any phy device at all\n",
-+ dev->name);
-+ return -ENODEV;
-+ }
-+
-+ priv->phy1_link = PHY_DOWN;
-+ priv->phy1_old_link = PHY_DOWN;
-+ priv->phy1_speed = 0;
-+ priv->phy1_duplex = -1;
-+
-+ priv->phy2_link = PHY_DOWN;
-+ priv->phy2_old_link = PHY_DOWN;
-+ priv->phy2_speed = 0;
-+ priv->phy2_duplex = -1;
-+
-+ phydev[0] = phy_connect(dev, dev_name(&phydev[0]->dev),
-+ &switch_adjust_link1, 0, PHY_INTERFACE_MODE_MII);
-+ if (IS_ERR(phydev[0])) {
-+ printk(KERN_ERR " %s phy_connect failed\n", __func__);
-+ return PTR_ERR(phydev[0]);
-+ }
-+
-+ phydev[1] = phy_connect(dev, dev_name(&phydev[1]->dev),
-+ &switch_adjust_link2, 0, PHY_INTERFACE_MODE_MII);
-+ if (IS_ERR(phydev[1])) {
-+ printk(KERN_ERR " %s phy_connect failed\n", __func__);
-+ return PTR_ERR(phydev[1]);
-+ }
-+
-+ for (i = 0; i < SWITCH_EPORT_NUMBER; i++) {
-+ printk(KERN_INFO "attached phy %i to driver %s\n",
-+ phydev[i]->addr, phydev[i]->drv->name);
-+ priv->phydev[i] = phydev[i];
-+ }
-+
-+ return 0;
-+}
-+/* -----------------------------------------------------------------------*/
-+static int switch_enet_open(struct net_device *dev)
-+{
-+ struct switch_enet_private *fep = netdev_priv(dev);
-+ volatile switch_t *fecp;
-+ int i;
-+
-+ fecp = (volatile switch_t *)fep->hwp;
-+ /* I should reset the ring buffers here, but I don't yet know
-+ * a simple way to do that.
-+ */
-+ switch_set_mac_address(dev);
-+
-+ fep->phy1_link = 0;
-+ fep->phy2_link = 0;
-+
-+ coldfire_switch_init_phy(dev);
-+ for (i = 0; i < SWITCH_EPORT_NUMBER; i++) {
-+ phy_write(fep->phydev[i], MII_BMCR, BMCR_RESET);
-+ phy_start(fep->phydev[i]);
-+ }
-+
-+ fep->phy1_old_link = 0;
-+ fep->phy2_old_link = 0;
-+ fep->phy1_link = 1;
-+ fep->phy2_link = 1;
-+
-+ /* no phy, go full duplex, it's most likely a hub chip */
-+ switch_restart(dev, 1);
-+
-+ /* if the fec is the fist open, we need to do nothing*/
-+ /* if the fec is not the fist open, we need to restart the FEC*/
-+ if (fep->sequence_done == 0)
-+ switch_restart(dev, 1);
-+ else
-+ fep->sequence_done = 0;
-+
-+ fep->currTime = 0;
-+ fep->learning_irqhandle_enable = 0;
-+
-+ MCF_ESW_PER = 0x70007;
-+ fecp->ESW_DBCR = MCF_ESW_DBCR_P0 | MCF_ESW_DBCR_P1 | MCF_ESW_DBCR_P2;
-+ fecp->ESW_DMCR = MCF_ESW_DMCR_P0 | MCF_ESW_DMCR_P1 | MCF_ESW_DMCR_P2;
-+
-+ netif_start_queue(dev);
-+ fep->opened = 1;
-+
-+ return 0;
-+}
-+
-+static int switch_enet_close(struct net_device *dev)
-+{
-+ struct switch_enet_private *fep = netdev_priv(dev);
-+ int i;
-+
-+ /* Don't know what to do yet.*/
-+ fep->opened = 0;
-+ netif_stop_queue(dev);
-+ switch_stop(dev);
-+
-+ for (i = 0; i < SWITCH_EPORT_NUMBER; i++) {
-+ phy_disconnect(fep->phydev[i]);
-+ phy_stop(fep->phydev[i]);
-+ phy_write(fep->phydev[i], MII_BMCR, BMCR_PDOWN);
-+ }
-+
-+ return 0;
-+}
-+
-+/* Set or clear the multicast filter for this adaptor.
-+ * Skeleton taken from sunlance driver.
-+ * The CPM Ethernet implementation allows Multicast as well as individual
-+ * MAC address filtering. Some of the drivers check to make sure it is
-+ * a group multicast address, and discard those that are not. I guess I
-+ * will do the same for now, but just remove the test if you want
-+ * individual filtering as well (do the upper net layers want or support
-+ * this kind of feature?).
-+ */
-+
-+#define HASH_BITS 6 /* #bits in hash */
-+#define CRC32_POLY 0xEDB88320
-+
-+static void set_multicast_list(struct net_device *dev)
-+{
-+ struct switch_enet_private *fep;
-+ volatile switch_t *ep;
-+ unsigned int i, bit, data, crc;
-+ struct netdev_hw_addr *ha;
-+
-+ fep = netdev_priv(dev);
-+ ep = fep->hwp;
-+
-+ if (dev->flags & IFF_PROMISC) {
-+ printk(KERN_INFO "%s IFF_PROMISC\n", __func__);
-+ } else {
-+ if (dev->flags & IFF_ALLMULTI)
-+ /* Catch all multicast addresses, so set the
-+ * filter to all 1's.
-+ */
-+ printk(KERN_INFO "%s IFF_ALLMULTI\n", __func__);
-+ else {
-+ netdev_for_each_mc_addr(ha, dev) {
-+ if (!(ha->addr[0] & 1))
-+ continue;
-+
-+ /* calculate crc32 value of mac address
-+ */
-+ crc = 0xffffffff;
-+
-+ for (i = 0; i < dev->addr_len; i++) {
-+ data = ha->addr[i];
-+ for (bit = 0; bit < 8; bit++,
-+ data >>= 1) {
-+ crc = (crc >> 1) ^
-+ (((crc ^ data) & 1) ?
-+ CRC32_POLY : 0);
-+ }
-+ }
-+
-+ }
-+ }
-+ }
-+}
-+
-+/* Set a MAC change in hardware.*/
-+static void switch_set_mac_address(struct net_device *dev)
-+{
-+ volatile switch_t *fecp;
-+
-+ fecp = ((struct switch_enet_private *)netdev_priv(dev))->hwp;
-+}
-+
-+static void switch_hw_init(void)
-+{
-+ /* GPIO config - RMII mode for both MACs */
-+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC_RMII0FUL_1FUL;
-+
-+ /* Initialize MAC 0/1 */
-+ /* RCR */
-+ MCF_FEC_RCR0 = (MCF_FEC_RCR_PROM | MCF_FEC_RCR_RMII_MODE |
-+ MCF_FEC_RCR_MAX_FL(1522) | MCF_FEC_RCR_CRC_FWD);
-+ MCF_FEC_RCR1 = (MCF_FEC_RCR_PROM | MCF_FEC_RCR_RMII_MODE |
-+ MCF_FEC_RCR_MAX_FL(1522) | MCF_FEC_RCR_CRC_FWD);
-+ /* TCR */
-+ MCF_FEC_TCR0 = MCF_FEC_TCR_FDEN;
-+ MCF_FEC_TCR1 = MCF_FEC_TCR_FDEN;
-+ /* ECR */
-+#ifdef MODELO_BUFFER
-+ MCF_FEC_ECR0 = MCF_FEC_ECR_ETHER_EN | MCF_FEC_ECR_ENA_1588;
-+ MCF_FEC_ECR1 = MCF_FEC_ECR_ETHER_EN | MCF_FEC_ECR_ENA_1588;
-+#else
-+ MCF_FEC_ECR0 = MCF_FEC_ECR_ETHER_EN;
-+ MCF_FEC_ECR1 = MCF_FEC_ECR_ETHER_EN;
-+#endif
-+ MCF_FEC_MSCR0 = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
-+ MCF_FEC_MSCR1 = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
-+
-+ MCF_FEC_EIMR0 = FEC_ENET_TXF | FEC_ENET_RXF;
-+ MCF_FEC_EIMR1 = FEC_ENET_TXF | FEC_ENET_RXF;
-+ /*MCF_PPMHR0*/
-+ MCF_PPMCR0 = 0;
-+}
-+
-+static const struct net_device_ops switch_netdev_ops = {
-+ .ndo_open = switch_enet_open,
-+ .ndo_stop = switch_enet_close,
-+ .ndo_start_xmit = switch_enet_start_xmit,
-+ .ndo_set_multicast_list = set_multicast_list,
-+ .ndo_do_ioctl = switch_enet_ioctl,
-+ .ndo_tx_timeout = switch_timeout,
-+};
-+
-+/* Initialize the FEC Ethernet.
-+ */
-+ /*
-+ * XXX: We need to clean up on failure exits here.
-+ */
-+static int switch_enet_init(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct switch_enet_private *fep = netdev_priv(dev);
-+ unsigned long mem_addr;
-+ cbd_t *bdp;
-+ cbd_t *cbd_base;
-+ volatile switch_t *fecp;
-+ int i, j;
-+ struct coldfire_switch_platform_data *plat =
-+ pdev->dev.platform_data;
-+
-+ /* Allocate memory for buffer descriptors.
-+ */
-+ mem_addr = __get_free_page(GFP_DMA);
-+ if (mem_addr == 0) {
-+ printk(KERN_ERR "Switch: allocate descriptor memory failed?\n");
-+ return -ENOMEM;
-+ }
-+
-+ spin_lock_init(&fep->hw_lock);
-+ spin_lock_init(&fep->mii_lock);
-+
-+ /* Create an Ethernet device instance.
-+ */
-+ fecp = (volatile switch_t *)plat->switch_hw[0];
-+ fep->hwp = fecp;
-+ fep->netdev = dev;
-+
-+ /*
-+ * SWITCH CONFIGURATION
-+ */
-+ fecp->ESW_MODE = MCF_ESW_MODE_SW_RST;
-+ udelay(10);
-+ /* enable switch*/
-+ fecp->ESW_MODE = MCF_ESW_MODE_STATRST;
-+ fecp->ESW_MODE = MCF_ESW_MODE_SW_EN;
-+
-+ /* Enable transmit/receive on all ports */
-+ fecp->ESW_PER = 0xffffffff;
-+
-+ /* Management port configuration,
-+ * make port 0 as management port */
-+ fecp->ESW_BMPC = 0;
-+
-+ /* clear all switch irq*/
-+ fecp->switch_ievent = 0xffffffff;
-+ fecp->switch_imask = 0;
-+
-+ udelay(10);
-+
-+ /* Set the Ethernet address. If using multiple Enets on the 8xx,
-+ * this needs some work to get unique addresses.
-+ *
-+ * This is our default MAC address unless the user changes
-+ * it via eth_mac_addr (our dev->set_mac_addr handler).
-+ */
-+ if (plat && plat->get_mac)
-+ plat->get_mac(dev);
-+
-+ cbd_base = (cbd_t *)mem_addr;
-+ /* XXX: missing check for allocation failure */
-+ if (plat && plat->uncache)
-+ plat->uncache(mem_addr);
-+
-+ /* Set receive and transmit descriptor base.
-+ */
-+ fep->rx_bd_base = cbd_base;
-+ fep->tx_bd_base = cbd_base + RX_RING_SIZE;
-+
-+ dev->base_addr = (unsigned long)fecp;
-+
-+ /* The FEC Ethernet specific entries in the device structure. */
-+ dev->watchdog_timeo = TX_TIMEOUT;
-+ dev->netdev_ops = &switch_netdev_ops;
-+
-+ fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-+ fep->cur_rx = fep->rx_bd_base;
-+
-+ fep->skb_cur = fep->skb_dirty = 0;
-+
-+ /* Initialize the receive buffer descriptors. */
-+ bdp = fep->rx_bd_base;
-+
-+ for (i = 0; i < SWITCH_ENET_RX_PAGES; i++) {
-+
-+ /* Allocate a page.
-+ */
-+ mem_addr = __get_free_page(GFP_DMA);
-+ /* XXX: missing check for allocation failure */
-+ if (plat && plat->uncache)
-+ plat->uncache(mem_addr);
-+
-+ /* Initialize the BD for every fragment in the page.
-+ */
-+ for (j = 0; j < SWITCH_ENET_RX_FRPPG; j++) {
-+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
-+ bdp->cbd_bufaddr = __pa(mem_addr);
-+#ifdef MODELO_BUFFER
-+ bdp->bdu = 0x00000000;
-+ bdp->ebd_status = RX_BD_INT;
-+#endif
-+ mem_addr += SWITCH_ENET_RX_FRSIZE;
-+ bdp++;
-+ }
-+ }
-+
-+ /* Set the last buffer to wrap.
-+ */
-+ bdp--;
-+ bdp->cbd_sc |= BD_SC_WRAP;
-+
-+ /* ...and the same for transmmit.
-+ */
-+ bdp = fep->tx_bd_base;
-+ for (i = 0, j = SWITCH_ENET_TX_FRPPG; i < TX_RING_SIZE; i++) {
-+ if (j >= SWITCH_ENET_TX_FRPPG) {
-+ mem_addr = __get_free_page(GFP_DMA);
-+ j = 1;
-+ } else {
-+ mem_addr += SWITCH_ENET_TX_FRSIZE;
-+ j++;
-+ }
-+ fep->tx_bounce[i] = (unsigned char *) mem_addr;
-+
-+ /* Initialize the BD for every fragment in the page.
-+ */
-+ bdp->cbd_sc = 0;
-+ bdp->cbd_bufaddr = 0;
-+ bdp++;
-+ }
-+
-+ /* Set the last buffer to wrap.
-+ */
-+ bdp--;
-+ bdp->cbd_sc |= BD_SC_WRAP;
-+
-+ /* Set receive and transmit descriptor base.
-+ */
-+ fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base));
-+ fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base));
-+
-+ /* Install our interrupt handlers. This varies depending on
-+ * the architecture.
-+ */
-+ if (plat && plat->request_intrs)
-+ plat->request_intrs(dev, switch_enet_interrupt, dev);
-+
-+ fecp->fec_r_buff_size = RX_BUFFER_SIZE;
-+ fecp->fec_r_des_active = MCF_ESW_RDAR_R_DES_ACTIVE;
-+
-+ /* setup MII interface */
-+ if (plat && plat->set_mii)
-+ plat->set_mii(dev);
-+
-+ /* Clear and enable interrupts */
-+ fecp->switch_ievent = 0xffffffff;
-+ fecp->switch_imask = MCF_ESW_IMR_RXB | MCF_ESW_IMR_TXB |
-+ MCF_ESW_IMR_RXF | MCF_ESW_IMR_TXF;
-+ esw_clear_atable(fep);
-+ /* Queue up command to detect the PHY and initialize the
-+ * remainder of the interface.
-+ */
-+#ifndef CONFIG_FEC_SHARED_PHY
-+ fep->phy_addr = 0;
-+#else
-+ fep->phy_addr = fep->index;
-+#endif
-+
-+ fep->sequence_done = 1;
-+ return 0;
-+}
-+
-+/* This function is called to start or restart the FEC during a link
-+ * change. This only happens when switching between half and full
-+ * duplex.
-+ */
-+static void switch_restart(struct net_device *dev, int duplex)
-+{
-+ struct switch_enet_private *fep;
-+ cbd_t *bdp;
-+ volatile switch_t *fecp;
-+ int i;
-+ struct coldfire_switch_platform_data *plat;
-+
-+ fep = netdev_priv(dev);
-+ fecp = fep->hwp;
-+ plat = fep->pdev->dev.platform_data;
-+ /* Whack a reset. We should wait for this.*/
-+ MCF_FEC_ECR0 = 1;
-+ MCF_FEC_ECR1 = 1;
-+ udelay(10);
-+
-+ fecp->ESW_MODE = MCF_ESW_MODE_SW_RST;
-+ udelay(10);
-+ fecp->ESW_MODE = MCF_ESW_MODE_STATRST;
-+ fecp->ESW_MODE = MCF_ESW_MODE_SW_EN;
-+
-+ /* Enable transmit/receive on all ports */
-+ fecp->ESW_PER = 0xffffffff;
-+
-+ /* Management port configuration,
-+ * make port 0 as management port */
-+ fecp->ESW_BMPC = 0;
-+
-+ /* Clear any outstanding interrupt.
-+ */
-+ fecp->switch_ievent = 0xffffffff;
-+
-+ /* Set station address.*/
-+ switch_set_mac_address(dev);
-+
-+ switch_hw_init();
-+
-+ /* Reset all multicast.*/
-+
-+ /* Set maximum receive buffer size.
-+ */
-+ fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-+
-+ if (plat && plat->localhw_setup)
-+ plat->localhw_setup();
-+ /* Set receive and transmit descriptor base.
-+ */
-+ fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base));
-+ fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base));
-+
-+ fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-+ fep->cur_rx = fep->rx_bd_base;
-+
-+ /* Reset SKB transmit buffers.
-+ */
-+ fep->skb_cur = fep->skb_dirty = 0;
-+ for (i = 0; i <= TX_RING_MOD_MASK; i++) {
-+ if (fep->tx_skbuff[i] != NULL) {
-+ dev_kfree_skb_any(fep->tx_skbuff[i]);
-+ fep->tx_skbuff[i] = NULL;
-+ }
-+ }
-+
-+ /* Initialize the receive buffer descriptors.
-+ */
-+ bdp = fep->rx_bd_base;
-+ for (i = 0; i < RX_RING_SIZE; i++) {
-+
-+ /* Initialize the BD for every fragment in the page.
-+ */
-+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
-+#ifdef MODELO_BUFFER
-+ bdp->bdu = 0x00000000;
-+ bdp->ebd_status = RX_BD_INT;
-+#endif
-+ bdp++;
-+ }
-+
-+ /* Set the last buffer to wrap.
-+ */
-+ bdp--;
-+ bdp->cbd_sc |= BD_SC_WRAP;
-+
-+ /* ...and the same for transmmit.
-+ */
-+ bdp = fep->tx_bd_base;
-+ for (i = 0; i < TX_RING_SIZE; i++) {
-+
-+ /* Initialize the BD for every fragment in the page.*/
-+ bdp->cbd_sc = 0;
-+ bdp->cbd_bufaddr = 0;
-+ bdp++;
-+ }
-+
-+ /* Set the last buffer to wrap.*/
-+ bdp--;
-+ bdp->cbd_sc |= BD_SC_WRAP;
-+
-+ fep->full_duplex = duplex;
-+
-+ /* And last, enable the transmit and receive processing.*/
-+ fecp->fec_r_buff_size = RX_BUFFER_SIZE;
-+ fecp->fec_r_des_active = MCF_ESW_RDAR_R_DES_ACTIVE;
-+
-+ /* Enable interrupts we wish to service.
-+ */
-+ fecp->switch_ievent = 0xffffffff;
-+ fecp->switch_imask = MCF_ESW_IMR_RXF | MCF_ESW_IMR_TXF |
-+ MCF_ESW_IMR_RXB | MCF_ESW_IMR_TXB;
-+}
-+
-+static void switch_stop(struct net_device *dev)
-+{
-+ volatile switch_t *fecp;
-+ struct switch_enet_private *fep;
-+ struct coldfire_switch_platform_data *plat;
-+
-+ fep = netdev_priv(dev);
-+ fecp = fep->hwp;
-+ plat = fep->pdev->dev.platform_data;
-+ /*
-+ ** We cannot expect a graceful transmit stop without link !!!
-+ */
-+ if (fep->phy1_link)
-+ udelay(10);
-+ if (fep->phy2_link)
-+ udelay(10);
-+
-+ /* Whack a reset. We should wait for this.
-+ */
-+ udelay(10);
-+}
-+
-+static int fec_mdio_register(struct net_device *dev)
-+{
-+ int err = 0;
-+ struct switch_enet_private *fep = netdev_priv(dev);
-+
-+ fep->mdio_bus = mdiobus_alloc();
-+ if (!fep->mdio_bus) {
-+ printk(KERN_ERR "ethernet switch mdiobus_alloc fail\n");
-+ return -ENOMEM;
-+ }
-+
-+ fep->mdio_bus->name = "Coldfire switch MII 0 Bus";
-+ strcpy(fep->mdio_bus->id, "0");
-+
-+ fep->mdio_bus->read = &coldfire_fec_mdio_read;
-+ fep->mdio_bus->write = &coldfire_fec_mdio_write;
-+ fep->mdio_bus->priv = dev;
-+ err = mdiobus_register(fep->mdio_bus);
-+ if (err) {
-+ mdiobus_free(fep->mdio_bus);
-+ printk(KERN_ERR "%s: ethernet mdiobus_register fail\n",
-+ dev->name);
-+ return -EIO;
-+ }
-+
-+ printk(KERN_INFO "mdiobus_register %s ok\n",
-+ fep->mdio_bus->name);
-+ return err;
-+}
-+
-+static int __devinit eth_switch_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ int err;
-+ struct switch_enet_private *fep;
-+ struct task_struct *task;
-+
-+ printk(KERN_INFO "Ethernet Switch Version 1.0\n");
-+
-+ dev = alloc_etherdev(sizeof(struct switch_enet_private));
-+ if (!dev) {
-+ printk(KERN_ERR "%s: ethernet switch alloc_etherdev fail\n",
-+ dev->name);
-+ return -ENOMEM;
-+ }
-+
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+ fep = netdev_priv(dev);
-+ memset(fep, 0, sizeof(*fep));
-+
-+ fep->pdev = pdev;
-+ platform_set_drvdata(pdev, dev);
-+ printk(KERN_ERR "%s: ethernet switch port 0 init\n",
-+ __func__);
-+ err = switch_enet_init(pdev);
-+ if (err) {
-+ free_netdev(dev);
-+ platform_set_drvdata(pdev, NULL);
-+ }
-+
-+ err = fec_mdio_register(dev);
-+ if (err) {
-+ printk(KERN_ERR "%s: ethernet switch fec_mdio_register\n",
-+ dev->name);
-+ free_netdev(dev);
-+ platform_set_drvdata(pdev, NULL);
-+ return -ENOMEM;
-+ }
-+
-+ /* setup timer for Learning Aging function */
-+ init_timer(&fep->timer_aging);
-+ fep->timer_aging.function = l2switch_aging_timer;
-+ fep->timer_aging.data = (unsigned long) fep;
-+ fep->timer_aging.expires = jiffies + LEARNING_AGING_TIMER;
-+ add_timer(&fep->timer_aging);
-+
-+ /* register network device*/
-+ if (register_netdev(dev) != 0) {
-+ /* XXX: missing cleanup here */
-+ free_netdev(dev);
-+ platform_set_drvdata(pdev, NULL);
-+ printk(KERN_ERR "%s: ethernet switch register_netdev fail\n",
-+ dev->name);
-+ return -EIO;
-+ }
-+
-+ task = kthread_run(switch_enet_learning, fep,
-+ "modelo l2switch");
-+ if (IS_ERR(task)) {
-+ err = PTR_ERR(task);
-+ return err;
-+ }
-+
-+ printk(KERN_INFO "%s: ethernet switch %pM\n",
-+ dev->name, dev->dev_addr);
-+ return 0;
-+}
-+
-+static int __devexit eth_switch_remove(struct platform_device *pdev)
-+{
-+ int i;
-+ struct net_device *dev;
-+ struct switch_enet_private *fep;
-+ struct switch_platform_private *chip;
-+
-+ chip = platform_get_drvdata(pdev);
-+ if (chip) {
-+ for (i = 0; i < chip->num_slots; i++) {
-+ fep = chip->fep_host[i];
-+ dev = fep->netdev;
-+ fep->sequence_done = 1;
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+
-+ del_timer_sync(&fep->timer_aging);
-+ }
-+
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(chip);
-+
-+ } else
-+ printk(KERN_ERR "%s: can not get the "
-+ "switch_platform_private %x\n", __func__,
-+ (unsigned int)chip);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver eth_switch_driver = {
-+ .probe = eth_switch_probe,
-+ .remove = __devexit_p(eth_switch_remove),
-+ .driver = {
-+ .name = "coldfire-switch",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init coldfire_switch_init(void)
-+{
-+ return platform_driver_register(&eth_switch_driver);
-+}
-+
-+static void __exit coldfire_switch_exit(void)
-+{
-+ platform_driver_unregister(&eth_switch_driver);
-+}
-+
-+module_init(coldfire_switch_init);
-+module_exit(coldfire_switch_exit);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/modelo_switch.h
-@@ -0,0 +1,1141 @@
-+/****************************************************************************/
-+
-+/*
-+ * mcfswitch -- L2 Switch Controller for Modelo ColdFire SoC
-+ * processors.
-+ *
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or (at
-+ * your option) any later version.
-+ *
-+ */
-+
-+/****************************************************************************/
-+#ifndef SWITCH_H
-+#define SWITCH_H
-+/****************************************************************************/
-+/* The Switch stores dest/src/type, data, and checksum for receive packets.
-+ */
-+#define PKT_MAXBUF_SIZE 1518
-+#define PKT_MINBUF_SIZE 64
-+#define PKT_MAXBLR_SIZE 1520
-+
-+/*
-+ * The 5441x RX control register also contains maximum frame
-+ * size bits.
-+ */
-+#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
-+
-+/*
-+ * Some hardware gets it MAC address out of local flash memory.
-+ * if this is non-zero then assume it is the address to get MAC from.
-+ */
-+#define FEC_FLASHMAC 0
-+
-+/* The number of Tx and Rx buffers. These are allocated from the page
-+ * pool. The code may assume these are power of two, so it it best
-+ * to keep them that size.
-+ * We don't need to allocate pages for the transmitter. We just use
-+ * the skbuffer directly.
-+ */
-+#ifdef CONFIG_SWITCH_DMA_USE_SRAM
-+#define SWITCH_ENET_RX_PAGES 6
-+#else
-+#define SWITCH_ENET_RX_PAGES 8
-+#endif
-+
-+#define SWITCH_ENET_RX_FRSIZE 2048
-+#define SWITCH_ENET_RX_FRPPG (PAGE_SIZE / SWITCH_ENET_RX_FRSIZE)
-+#define RX_RING_SIZE (SWITCH_ENET_RX_FRPPG * SWITCH_ENET_RX_PAGES)
-+#define SWITCH_ENET_TX_FRSIZE 2048
-+#define SWITCH_ENET_TX_FRPPG (PAGE_SIZE / SWITCH_ENET_TX_FRSIZE)
-+
-+#ifdef CONFIG_SWITCH_DMA_USE_SRAM
-+#define TX_RING_SIZE 8 /* Must be power of two */
-+#define TX_RING_MOD_MASK 7 /* for this to work */
-+#else
-+#define TX_RING_SIZE 16 /* Must be power of two */
-+#define TX_RING_MOD_MASK 15 /* for this to work */
-+#endif
-+
-+#define SWITCH_EPORT_NUMBER 2
-+
-+#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE)
-+#error "L2SWITCH: descriptor ring size constants too large"
-+#endif
-+/*-----------------------------------------------------------------------*/
-+typedef struct l2switch_output_queue_status {
-+ unsigned long ESW_MMSR;
-+ unsigned long ESW_LMT;
-+ unsigned long ESW_LFC;
-+ unsigned long ESW_PCSR;
-+ unsigned long ESW_IOSR;
-+ unsigned long ESW_QWT;
-+ unsigned long esw_reserved;
-+ unsigned long ESW_P0BCT;
-+} esw_output_queue_status;
-+
-+typedef struct l2switch_statistics_status {
-+ /*
-+ * Total number of incoming frames processed
-+ * but discarded in switch
-+ */
-+ unsigned long ESW_DISCN;
-+ /*Sum of bytes of frames counted in ESW_DISCN*/
-+ unsigned long ESW_DISCB;
-+ /*
-+ * Total number of incoming frames processed
-+ * but not discarded in switch
-+ */
-+ unsigned long ESW_NDISCN;
-+ /*Sum of bytes of frames counted in ESW_NDISCN*/
-+ unsigned long ESW_NDISCB;
-+} esw_statistics_status;
-+
-+typedef struct l2switch_port_statistics_status {
-+ /*outgoing frames discarded due to transmit queue congestion*/
-+ unsigned long MCF_ESW_POQC;
-+ /*incoming frames discarded due to VLAN domain mismatch*/
-+ unsigned long MCF_ESW_PMVID;
-+ /*incoming frames discarded due to untagged discard*/
-+ unsigned long MCF_ESW_PMVTAG;
-+ /*incoming frames discarded due port is in blocking state*/
-+ unsigned long MCF_ESW_PBL;
-+} esw_port_statistics_status;
-+
-+typedef struct l2switch {
-+ unsigned long ESW_REVISION;
-+ unsigned long ESW_SCRATCH;
-+ unsigned long ESW_PER;
-+ unsigned long reserved0[1];
-+ unsigned long ESW_VLANV;
-+ unsigned long ESW_DBCR;
-+ unsigned long ESW_DMCR;
-+ unsigned long ESW_BKLR;
-+ unsigned long ESW_BMPC;
-+ unsigned long ESW_MODE;
-+ unsigned long ESW_VIMSEL;
-+ unsigned long ESW_VOMSEL;
-+ unsigned long ESW_VIMEN;
-+ unsigned long ESW_VID;/*0x34*/
-+ /*from 0x38 0x3C*/
-+ unsigned long esw_reserved0[2];
-+ unsigned long ESW_MCR;/*0x40*/
-+ unsigned long ESW_EGMAP;
-+ unsigned long ESW_INGMAP;
-+ unsigned long ESW_INGSAL;
-+ unsigned long ESW_INGSAH;
-+ unsigned long ESW_INGDAL;
-+ unsigned long ESW_INGDAH;
-+ unsigned long ESW_ENGSAL;
-+ unsigned long ESW_ENGSAH;
-+ unsigned long ESW_ENGDAL;
-+ unsigned long ESW_ENGDAH;
-+ unsigned long ESW_MCVAL;/*0x6C*/
-+ /*from 0x70--0x7C*/
-+ unsigned long esw_reserved1[4];
-+ unsigned long ESW_MMSR;/*0x80*/
-+ unsigned long ESW_LMT;
-+ unsigned long ESW_LFC;
-+ unsigned long ESW_PCSR;
-+ unsigned long ESW_IOSR;
-+ unsigned long ESW_QWT;/*0x94*/
-+ unsigned long esw_reserved2[1];/*0x98*/
-+ unsigned long ESW_P0BCT;/*0x9C*/
-+ /*from 0xA0-0xB8*/
-+ unsigned long esw_reserved3[7];
-+ unsigned long ESW_P0FFEN;/*0xBC*/
-+ unsigned long ESW_PSNP[8];
-+ unsigned long ESW_IPSNP[8];
-+ /*port0-port2 VLAN Priority resolution map 0xFC0D_C100-C108*/
-+ unsigned long ESW_PVRES[3];
-+ /*from 0x10C-0x13C*/
-+ unsigned long esw_reserved4[13];
-+ unsigned long ESW_IPRES;/*0x140*/
-+ /*from 0x144-0x17C*/
-+ unsigned long esw_reserved5[15];
-+
-+ /*port0-port2 Priority Configuration 0xFC0D_C180-C188*/
-+ unsigned long ESW_PRES[3];
-+ /*from 0x18C-0x1FC*/
-+ unsigned long esw_reserved6[29];
-+
-+ /*port0-port2 VLAN ID 0xFC0D_C200-C208*/
-+ unsigned long ESW_PID[3];
-+ /*from 0x20C-0x27C*/
-+ unsigned long esw_reserved7[29];
-+
-+ /*port0-port2 VLAN domain resolution entry 0xFC0D_C280-C2FC*/
-+ unsigned long ESW_VRES[32];
-+
-+ unsigned long ESW_DISCN;/*0x300*/
-+ unsigned long ESW_DISCB;
-+ unsigned long ESW_NDISCN;
-+ unsigned long ESW_NDISCB;/*0xFC0DC30C*/
-+ /*per port statistics 0xFC0DC310_C33C*/
-+ esw_port_statistics_status port_statistics_status[3];
-+ /*from 0x340-0x400*/
-+ unsigned long esw_reserved8[48];
-+
-+ /*0xFC0DC400---0xFC0DC418*/
-+ /*unsigned long MCF_ESW_ISR;*/
-+ unsigned long switch_ievent; /* Interrupt event reg */
-+ /*unsigned long MCF_ESW_IMR;*/
-+ unsigned long switch_imask; /* Interrupt mask reg */
-+ /*unsigned long MCF_ESW_RDSR;*/
-+ unsigned long fec_r_des_start; /* Receive descriptor ring */
-+ /*unsigned long MCF_ESW_TDSR;*/
-+ unsigned long fec_x_des_start; /* Transmit descriptor ring */
-+ /*unsigned long MCF_ESW_MRBR;*/
-+ unsigned long fec_r_buff_size; /* Maximum receive buff size */
-+ /*unsigned long MCF_ESW_RDAR;*/
-+ unsigned long fec_r_des_active; /* Receive descriptor reg */
-+ /*unsigned long MCF_ESW_TDAR;*/
-+ unsigned long fec_x_des_active; /* Transmit descriptor reg */
-+ /*from 0x420-0x4FC*/
-+ unsigned long esw_reserved9[57];
-+
-+ /*0xFC0DC500---0xFC0DC508*/
-+ unsigned long ESW_LREC0;
-+ unsigned long ESW_LREC1;
-+ unsigned long ESW_LSR;
-+} switch_t;
-+
-+typedef struct _64bTableEntry {
-+ unsigned int lo; /* lower 32 bits */
-+ unsigned int hi; /* upper 32 bits */
-+} AddrTable64bEntry;
-+
-+typedef struct l2switchaddrtable {
-+ AddrTable64bEntry eswTable64bEntry[2048];
-+} eswAddrTable_t;
-+
-+/*unsigned long MCF_ESW_LOOKUP_MEM;*/
-+#define MCF_ESW_REVISION (*(volatile unsigned long *)(0xFC0DC000))
-+#define MCF_ESW_PER (*(volatile unsigned long *)(0xFC0DC008))
-+#define MCF_ESW_VLANV (*(volatile unsigned long *)(0xFC0DC010))
-+#define MCF_ESW_DBCR (*(volatile unsigned long *)(0xFC0DC014))
-+#define MCF_ESW_DMCR (*(volatile unsigned long *)(0xFC0DC018))
-+#define MCF_ESW_BKLR (*(volatile unsigned long *)(0xFC0DC01C))
-+#define MCF_ESW_BMPC (*(volatile unsigned long *)(0xFC0DC020))
-+#define MCF_ESW_MODE (*(volatile unsigned long *)(0xFC0DC024))
-+
-+#define MCF_ESW_ISR (*(volatile unsigned long *)(0xFC0DC400))
-+#define MCF_ESW_IMR (*(volatile unsigned long *)(0xFC0DC404))
-+#define MCF_ESW_TDAR (*(volatile unsigned long *)(0xFC0DC418))
-+#define MCF_ESW_LOOKUP_MEM (*(volatile unsigned long *)(0xFC0E0000))
-+
-+#define MCF_PPMCR0 (*(volatile unsigned short *)(0xFC04002D))
-+#define MCF_PPMHR0 (*(volatile unsigned long *)(0xFC040030))
-+
-+#define MCF_FEC_EIR0 (*(volatile unsigned long *)(0xFC0D4004))
-+#define MCF_FEC_EIR1 (*(volatile unsigned long *)(0xFC0D8004))
-+#define MCF_FEC_EIMR0 (*(volatile unsigned long *)(0xFC0D4008))
-+#define MCF_FEC_EIMR1 (*(volatile unsigned long *)(0xFC0D8008))
-+#define MCF_FEC_MMFR0 (*(volatile unsigned long *)(0xFC0D4040))
-+#define MCF_FEC_MMFR1 (*(volatile unsigned long *)(0xFC0D8040))
-+#define MCF_FEC_MSCR0 (*(volatile unsigned long *)(0xFC0D4044))
-+#define MCF_FEC_MSCR1 (*(volatile unsigned long *)(0xFC0D8044))
-+#define MCF_FEC_RCR0 (*(volatile unsigned long *)(0xFC0D4084))
-+#define MCF_FEC_RCR1 (*(volatile unsigned long *)(0xFC0D8084))
-+#define MCF_FEC_TCR0 (*(volatile unsigned long *)(0xFC0D40C4))
-+#define MCF_FEC_TCR1 (*(volatile unsigned long *)(0xFC0D80C4))
-+#define MCF_FEC_ECR0 (*(volatile unsigned long *)(0xFC0D4024))
-+#define MCF_FEC_ECR1 (*(volatile unsigned long *)(0xFC0D8024))
-+
-+
-+#define MCF_FEC_RCR_PROM (0x00000008)
-+#define MCF_FEC_RCR_RMII_MODE (0x00000100)
-+#define MCF_FEC_RCR_MAX_FL(x) (((x)&0x00003FFF)<<16)
-+#define MCF_FEC_RCR_CRC_FWD (0x00004000)
-+
-+#define MCF_FEC_TCR_FDEN (0x00000004)
-+
-+#define MCF_FEC_ECR_ETHER_EN (0x00000002)
-+#define MCF_FEC_ECR_ENA_1588 (0x00000010)
-+
-+/*-------------ioctl command ---------------------------------------*/
-+#define ESW_SET_LEARNING_CONF 0x9101
-+#define ESW_GET_LEARNING_CONF 0x9201
-+#define ESW_SET_BLOCKING_CONF 0x9102
-+#define ESW_GET_BLOCKING_CONF 0x9202
-+#define ESW_SET_MULTICAST_CONF 0x9103
-+#define ESW_GET_MULTICAST_CONF 0x9203
-+#define ESW_SET_BROADCAST_CONF 0x9104
-+#define ESW_GET_BROADCAST_CONF 0x9204
-+#define ESW_SET_PORTENABLE_CONF 0x9105
-+#define ESW_GET_PORTENABLE_CONF 0x9205
-+#define ESW_SET_IP_SNOOP_CONF 0x9106
-+#define ESW_GET_IP_SNOOP_CONF 0x9206
-+#define ESW_SET_PORT_SNOOP_CONF 0x9107
-+#define ESW_GET_PORT_SNOOP_CONF 0x9207
-+#define ESW_SET_PORT_MIRROR_CONF 0x9108
-+#define ESW_GET_PORT_MIRROR_CONF 0x9208
-+#define ESW_SET_PIRORITY_VLAN 0x9109
-+#define ESW_GET_PIRORITY_VLAN 0x9209
-+#define ESW_SET_PIRORITY_IP 0x910A
-+#define ESW_GET_PIRORITY_IP 0x920A
-+#define ESW_SET_PIRORITY_MAC 0x910B
-+#define ESW_GET_PIRORITY_MAC 0x920B
-+#define ESW_SET_PIRORITY_DEFAULT 0x910C
-+#define ESW_GET_PIRORITY_DEFAULT 0x920C
-+#define ESW_SET_P0_FORCED_FORWARD 0x910D
-+#define ESW_GET_P0_FORCED_FORWARD 0x920D
-+#define ESW_SET_SWITCH_MODE 0x910E
-+#define ESW_GET_SWITCH_MODE 0x920E
-+#define ESW_SET_BRIDGE_CONFIG 0x910F
-+#define ESW_GET_BRIDGE_CONFIG 0x920F
-+#define ESW_SET_VLAN_OUTPUT_PROCESS 0x9110
-+#define ESW_GET_VLAN_OUTPUT_PROCESS 0x9210
-+#define ESW_SET_VLAN_INPUT_PROCESS 0x9111
-+#define ESW_GET_VLAN_INPUT_PROCESS 0x9211
-+#define ESW_SET_VLAN_DOMAIN_VERIFICATION 0x9112
-+#define ESW_GET_VLAN_DOMAIN_VERIFICATION 0x9212
-+#define ESW_SET_VLAN_RESOLUTION_TABLE 0x9113
-+#define ESW_GET_VLAN_RESOLUTION_TABLE 0x9213
-+#define ESW_GET_ENTRY_PORT_NUMBER 0x9214
-+#define ESW_GET_LOOKUP_TABLE 0x9215
-+#define ESW_GET_PORT_STATUS 0x9216
-+#define ESW_SET_VLAN_ID 0x9114
-+#define ESW_SET_VLAN_ID_CLEARED 0x9115
-+#define ESW_SET_PORT_IN_VLAN_ID 0x9116
-+#define ESW_SET_PORT_ENTRY_EMPTY 0x9117
-+#define ESW_SET_OTHER_PORT_ENTRY_EMPTY 0x9118
-+#define ESW_GET_PORT_ALL_STATUS 0x9217
-+#define ESW_SET_PORT_MIRROR_CONF_PORT_MATCH 0x9119
-+#define ESW_SET_PORT_MIRROR_CONF_ADDR_MATCH 0x911A
-+
-+#define ESW_GET_STATISTICS_STATUS 0x9221
-+#define ESW_SET_OUTPUT_QUEUE_MEMORY 0x9125
-+#define ESW_GET_OUTPUT_QUEUE_STATUS 0x9225
-+#define ESW_UPDATE_STATIC_MACTABLE 0x9226
-+#define ESW_CLEAR_ALL_MACTABLE 0x9227
-+#define ESW_GET_USER_PID 0x9228
-+
-+typedef struct _eswIOCTL_PORT_CONF {
-+ int port;
-+ int enable;
-+} eswIoctlPortConfig;
-+
-+typedef struct _eswIOCTL_PORT_EN_CONF {
-+ int port;
-+ int tx_enable;
-+ int rx_enable;
-+} eswIoctlPortEnableConfig;
-+
-+typedef struct _eswIOCTL_IP_SNOOP_CONF {
-+ int mode;
-+ unsigned long ip_header_protocol;
-+} eswIoctlIpsnoopConfig;
-+
-+typedef struct _eswIOCTL_P0_FORCED_FORWARD_CONF {
-+ int port1;
-+ int port2;
-+ int enable;
-+} eswIoctlP0ForcedForwardConfig;
-+
-+typedef struct _eswIOCTL_PORT_SNOOP_CONF {
-+ int mode;
-+ unsigned short compare_port;
-+ int compare_num;
-+} eswIoctlPortsnoopConfig;
-+
-+typedef struct _eswIOCTL_PORT_Mirror_CONF {
-+ int mirror_port;
-+ int port;
-+ int egress_en;
-+ int ingress_en;
-+ int egress_mac_src_en;
-+ int egress_mac_des_en;
-+ int ingress_mac_src_en;
-+ int ingress_mac_des_en;
-+ unsigned char *src_mac;
-+ unsigned char *des_mac;
-+ int mirror_enable;
-+} eswIoctlPortMirrorConfig;
-+
-+struct eswIoctlMirrorCfgPortMatch {
-+ int mirror_port;
-+ int port_match_en;
-+ int port;
-+};
-+
-+struct eswIoctlMirrorCfgAddrMatch {
-+ int mirror_port;
-+ int addr_match_en;
-+ unsigned char *mac_addr;
-+};
-+
-+typedef struct _eswIOCTL_PRIORITY_VLAN_CONF {
-+ int port;
-+ int func_enable;
-+ int vlan_pri_table_num;
-+ int vlan_pri_table_value;
-+} eswIoctlPriorityVlanConfig;
-+
-+typedef struct _eswIOCTL_PRIORITY_IP_CONF {
-+ int port;
-+ int func_enable;
-+ int ipv4_en;
-+ int ip_priority_num;
-+ int ip_priority_value;
-+} eswIoctlPriorityIPConfig;
-+
-+typedef struct _eswIOCTL_PRIORITY_MAC_CONF {
-+ int port;
-+} eswIoctlPriorityMacConfig;
-+
-+typedef struct _eswIOCTL_PRIORITY_DEFAULT_CONF {
-+ int port;
-+ unsigned char priority_value;
-+} eswIoctlPriorityDefaultConfig;
-+
-+typedef struct _eswIOCTL_IRQ_STATUS {
-+ unsigned long isr;
-+ unsigned long imr;
-+ unsigned long rx_buf_pointer;
-+ unsigned long tx_buf_pointer;
-+ unsigned long rx_max_size;
-+ unsigned long rx_buf_active;
-+ unsigned long tx_buf_active;
-+} eswIoctlIrqStatus;
-+
-+typedef struct _eswIOCTL_PORT_Mirror_STATUS {
-+ unsigned long ESW_MCR;
-+ unsigned long ESW_EGMAP;
-+ unsigned long ESW_INGMAP;
-+ unsigned long ESW_INGSAL;
-+ unsigned long ESW_INGSAH;
-+ unsigned long ESW_INGDAL;
-+ unsigned long ESW_INGDAH;
-+ unsigned long ESW_ENGSAL;
-+ unsigned long ESW_ENGSAH;
-+ unsigned long ESW_ENGDAL;
-+ unsigned long ESW_ENGDAH;
-+ unsigned long ESW_MCVAL;
-+} eswIoctlPortMirrorStatus;
-+
-+typedef struct _eswIOCTL_VLAN_OUTPUT_CONF {
-+ int port;
-+ int mode;
-+} eswIoctlVlanOutputConfig;
-+
-+typedef struct _eswIOCTL_VLAN_INPUT_CONF {
-+ int port;
-+ int mode;
-+ unsigned short port_vlanid;
-+} eswIoctlVlanInputConfig;
-+
-+typedef struct _eswIOCTL_VLAN_DOMAIN_VERIFY_CONF {
-+ int port;
-+ int vlan_domain_verify_en;
-+ int vlan_discard_unknown_en;
-+} eswIoctlVlanVerificationConfig;
-+
-+typedef struct _eswIOCTL_VLAN_RESOULATION_TABLE {
-+ unsigned short port_vlanid;
-+ unsigned char vlan_domain_port;
-+ unsigned char vlan_domain_num;
-+} eswIoctlVlanResoultionTable;
-+
-+struct eswVlanTableItem {
-+ eswIoctlVlanResoultionTable table[32];
-+ unsigned char valid_num;
-+};
-+
-+typedef struct _eswIOCTL_VLAN_INPUT_STATUS {
-+ unsigned long ESW_VLANV;
-+ unsigned long ESW_PID[3];
-+ unsigned long ESW_VIMSEL;
-+ unsigned long ESW_VIMEN;
-+ unsigned long ESW_VRES[32];
-+} eswIoctlVlanInputStatus;
-+
-+typedef struct _eswIOCTL_Static_MACTable {
-+ unsigned char *mac_addr;
-+ int port;
-+ int priority;
-+} eswIoctlUpdateStaticMACtable;
-+
-+typedef struct _eswIOCTL_OUTPUT_QUEUE {
-+ int fun_num;
-+ esw_output_queue_status sOutputQueue;
-+} eswIoctlOutputQueue;
-+
-+/*=============================================================*/
-+#define LEARNING_AGING_TIMER (10 * HZ)
-+/*
-+ * Info received from Hardware Learning FIFO,
-+ * holding MAC address and corresponding Hash Value and
-+ * port number where the frame was received (disassembled).
-+ */
-+typedef struct _eswPortInfo {
-+ /* MAC lower 32 bits (first byte is 7:0). */
-+ unsigned int maclo;
-+ /* MAC upper 16 bits (47:32). */
-+ unsigned int machi;
-+ /* the hash value for this MAC address. */
-+ unsigned int hash;
-+ /* the port number this MAC address is associated with. */
-+ unsigned int port;
-+} eswPortInfo;
-+
-+/*
-+ * Hardware Look up Address Table 64-bit element.
-+ */
-+typedef volatile struct _64bitTableEntry {
-+ unsigned int lo; /* lower 32 bits */
-+ unsigned int hi; /* upper 32 bits */
-+} eswTable64bitEntry;
-+
-+struct eswAddrTableEntryExample {
-+ /* the entry number */
-+ unsigned short entrynum;
-+ /* mac address array */
-+ unsigned char mac_addr[6];
-+ unsigned char item1;
-+ unsigned short item2;
-+};
-+
-+/*
-+ * Define the buffer descriptor structure.
-+ */
-+typedef struct bufdesc {
-+ unsigned short cbd_sc; /* Control and status info */
-+ unsigned short cbd_datlen; /* Data length */
-+ unsigned long cbd_bufaddr; /* Buffer address */
-+#ifdef MODELO_BUFFER
-+ unsigned long ebd_status;
-+ unsigned short length_proto_type;
-+ unsigned short payload_checksum;
-+ unsigned long bdu;
-+ unsigned long timestamp;
-+ unsigned long reserverd_word1;
-+ unsigned long reserverd_word2;
-+#endif
-+} cbd_t;
-+
-+/* Forward declarations of some structures to support different PHYs
-+ */
-+typedef struct {
-+ uint mii_data;
-+ void (*funct)(uint mii_reg, struct net_device *dev);
-+} phy_cmd_t;
-+
-+typedef struct {
-+ uint id;
-+ char *name;
-+
-+ const phy_cmd_t *config;
-+ const phy_cmd_t *startup;
-+ const phy_cmd_t *ack_int;
-+ const phy_cmd_t *shutdown;
-+} phy_info_t;
-+
-+struct port_status {
-+ /* 1: link is up, 0: link is down */
-+ int port1_link_status;
-+ int port2_link_status;
-+ /* 1: blocking, 0: unblocking */
-+ int port0_block_status;
-+ int port1_block_status;
-+ int port2_block_status;
-+};
-+
-+struct port_all_status {
-+ /* 1: link is up, 0: link is down */
-+ int link_status;
-+ /* 1: blocking, 0: unblocking */
-+ int block_status;
-+ /* 1: unlearning, 0: learning */
-+ int learn_status;
-+ /* vlan domain verify 1: enable 0: disable */
-+ int vlan_verify;
-+ /* discard unknow 1: enable 0: disable */
-+ int discard_unknown;
-+ /* multicast resolution 1: enable 0: disable */
-+ int multi_reso;
-+ /* broadcast resolution 1: enable 0: disalbe */
-+ int broad_reso;
-+ /* transmit 1: enable 0: disable */
-+ int ftransmit;
-+ /* receive 1: enable 0: disable */
-+ int freceive;
-+};
-+
-+/* The switch buffer descriptors track the ring buffers. The rx_bd_base and
-+ * tx_bd_base always point to the base of the buffer descriptors. The
-+ * cur_rx and cur_tx point to the currently available buffer.
-+ * The dirty_tx tracks the current buffer that is being sent by the
-+ * controller. The cur_tx and dirty_tx are equal under both completely
-+ * empty and completely full conditions. The empty/ready indicator in
-+ * the buffer descriptor determines the actual condition.
-+ */
-+struct switch_enet_private {
-+ /* Hardware registers of the switch device */
-+ volatile switch_t *hwp;
-+ volatile eswAddrTable_t *hwentry;
-+
-+ struct net_device *netdev;
-+ struct platform_device *pdev;
-+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
-+ unsigned char *tx_bounce[TX_RING_SIZE];
-+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
-+ ushort skb_cur;
-+ ushort skb_dirty;
-+
-+ /* CPM dual port RAM relative addresses.
-+ */
-+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
-+ cbd_t *tx_bd_base;
-+ cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
-+ cbd_t *dirty_tx; /* The ring entries to be free()ed. */
-+ uint tx_full;
-+ /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
-+ spinlock_t hw_lock;
-+
-+ /* hold while accessing the mii_list_t() elements */
-+ spinlock_t mii_lock;
-+ struct mii_bus *mdio_bus;
-+ struct phy_device *phydev[SWITCH_EPORT_NUMBER];
-+
-+ uint phy_id;
-+ uint phy_id_done;
-+ uint phy_status;
-+ uint phy_speed;
-+ phy_info_t const *phy;
-+ struct work_struct phy_task;
-+ volatile switch_t *phy_hwp;
-+
-+ uint sequence_done;
-+ uint mii_phy_task_queued;
-+
-+ uint phy_addr;
-+
-+ int index;
-+ int opened;
-+ int full_duplex;
-+ int msg_enable;
-+ int phy1_link;
-+ int phy1_old_link;
-+ int phy1_duplex;
-+ int phy1_speed;
-+
-+ int phy2_link;
-+ int phy2_old_link;
-+ int phy2_duplex;
-+ int phy2_speed;
-+ /* --------------Statistics--------------------------- */
-+ /* when a new element deleted a element with in
-+ * a block due to lack of space */
-+ int atBlockOverflows;
-+ /* Peak number of valid entries in the address table */
-+ int atMaxEntries;
-+ /* current number of valid entries in the address table */
-+ int atCurrEntries;
-+ /* maximum entries within a block found
-+ * (updated within ageing)*/
-+ int atMaxEntriesPerBlock;
-+
-+ /* -------------------ageing function------------------ */
-+ /* maximum age allowed for an entry */
-+ int ageMax;
-+ /* last LUT entry to block that was
-+ * inspected by the Ageing task*/
-+ int ageLutIdx;
-+ /* last element within block inspected by the Ageing task */
-+ int ageBlockElemIdx;
-+ /* complete table has been processed by ageing process */
-+ int ageCompleted;
-+ /* delay setting */
-+ int ageDelay;
-+ /* current delay Counter */
-+ int ageDelayCnt;
-+
-+ /* ----------------timer related---------------------------- */
-+ /* current time (for timestamping) */
-+ int currTime;
-+ /* flag set by timer when currTime changed
-+ * and cleared by serving function*/
-+ int timeChanged;
-+
-+ /**/
-+ /* Timer for Aging */
-+ struct timer_list timer_aging;
-+ int learning_irqhandle_enable;
-+};
-+
-+struct switch_platform_private {
-+ unsigned long quirks;
-+ int num_slots; /* Slots on controller */
-+ struct switch_enet_private *fep_host[0]; /* Pointers to hosts */
-+};
-+
-+/******************************************************************************/
-+/* Recieve is empty */
-+#define BD_SC_EMPTY ((unsigned short)0x8000)
-+/* Transmit is ready */
-+#define BD_SC_READY ((unsigned short)0x8000)
-+/* Last buffer descriptor */
-+#define BD_SC_WRAP ((unsigned short)0x2000)
-+/* Interrupt on change */
-+#define BD_SC_INTRPT ((unsigned short)0x1000)
-+/* Continous mode */
-+#define BD_SC_CM ((unsigned short)0x0200)
-+/* Rec'd too many idles */
-+#define BD_SC_ID ((unsigned short)0x0100)
-+/* xmt preamble */
-+#define BD_SC_P ((unsigned short)0x0100)
-+/* Break received */
-+#define BD_SC_BR ((unsigned short)0x0020)
-+/* Framing error */
-+#define BD_SC_FR ((unsigned short)0x0010)
-+/* Parity error */
-+#define BD_SC_PR ((unsigned short)0x0008)
-+/* Overrun */
-+#define BD_SC_OV ((unsigned short)0x0002)
-+#define BD_SC_CD ((unsigned short)0x0001)
-+
-+/* Buffer descriptor control/status used by Ethernet receive.
-+*/
-+#define BD_ENET_RX_EMPTY ((unsigned short)0x8000)
-+#define BD_ENET_RX_WRAP ((unsigned short)0x2000)
-+#define BD_ENET_RX_INTR ((unsigned short)0x1000)
-+#define BD_ENET_RX_LAST ((unsigned short)0x0800)
-+#define BD_ENET_RX_FIRST ((unsigned short)0x0400)
-+#define BD_ENET_RX_MISS ((unsigned short)0x0100)
-+#define BD_ENET_RX_LG ((unsigned short)0x0020)
-+#define BD_ENET_RX_NO ((unsigned short)0x0010)
-+#define BD_ENET_RX_SH ((unsigned short)0x0008)
-+#define BD_ENET_RX_CR ((unsigned short)0x0004)
-+#define BD_ENET_RX_OV ((unsigned short)0x0002)
-+#define BD_ENET_RX_CL ((unsigned short)0x0001)
-+/* All status bits */
-+#define BD_ENET_RX_STATS ((unsigned short)0x013f)
-+
-+/* Buffer descriptor control/status used by Ethernet transmit.
-+*/
-+#define BD_ENET_TX_READY ((unsigned short)0x8000)
-+#define BD_ENET_TX_PAD ((unsigned short)0x4000)
-+#define BD_ENET_TX_WRAP ((unsigned short)0x2000)
-+#define BD_ENET_TX_INTR ((unsigned short)0x1000)
-+#define BD_ENET_TX_LAST ((unsigned short)0x0800)
-+#define BD_ENET_TX_TC ((unsigned short)0x0400)
-+#define BD_ENET_TX_DEF ((unsigned short)0x0200)
-+#define BD_ENET_TX_HB ((unsigned short)0x0100)
-+#define BD_ENET_TX_LC ((unsigned short)0x0080)
-+#define BD_ENET_TX_RL ((unsigned short)0x0040)
-+#define BD_ENET_TX_RCMASK ((unsigned short)0x003c)
-+#define BD_ENET_TX_UN ((unsigned short)0x0002)
-+#define BD_ENET_TX_CSL ((unsigned short)0x0001)
-+/* All status bits */
-+#define BD_ENET_TX_STATS ((unsigned short)0x03ff)
-+
-+/*Copy from validation code */
-+#define RX_BUFFER_SIZE 1520
-+#define TX_BUFFER_SIZE 1520
-+#define NUM_RXBDS 20
-+#define NUM_TXBDS 20
-+
-+#define TX_BD_R 0x8000
-+#define TX_BD_TO1 0x4000
-+#define TX_BD_W 0x2000
-+#define TX_BD_TO2 0x1000
-+#define TX_BD_L 0x0800
-+#define TX_BD_TC 0x0400
-+
-+#define TX_BD_INT 0x40000000
-+#define TX_BD_TS 0x20000000
-+#define TX_BD_PINS 0x10000000
-+#define TX_BD_IINS 0x08000000
-+#define TX_BD_TXE 0x00008000
-+#define TX_BD_UE 0x00002000
-+#define TX_BD_EE 0x00001000
-+#define TX_BD_FE 0x00000800
-+#define TX_BD_LCE 0x00000400
-+#define TX_BD_OE 0x00000200
-+#define TX_BD_TSE 0x00000100
-+#define TX_BD_BDU 0x80000000
-+
-+#define RX_BD_E 0x8000
-+#define RX_BD_R01 0x4000
-+#define RX_BD_W 0x2000
-+#define RX_BD_R02 0x1000
-+#define RX_BD_L 0x0800
-+#define RX_BD_M 0x0100
-+#define RX_BD_BC 0x0080
-+#define RX_BD_MC 0x0040
-+#define RX_BD_LG 0x0020
-+#define RX_BD_NO 0x0010
-+#define RX_BD_CR 0x0004
-+#define RX_BD_OV 0x0002
-+#define RX_BD_TR 0x0001
-+
-+#define RX_BD_ME 0x80000000
-+#define RX_BD_PE 0x04000000
-+#define RX_BD_CE 0x02000000
-+#define RX_BD_UC 0x01000000
-+#define RX_BD_INT 0x00800000
-+#define RX_BD_ICE 0x00000020
-+#define RX_BD_PCR 0x00000010
-+#define RX_BD_VLAN 0x00000004
-+#define RX_BD_IPV6 0x00000002
-+#define RX_BD_FRAG 0x00000001
-+#define RX_BD_BDU 0x80000000
-+/****************************************************************************/
-+
-+/* Address Table size in bytes(2048 64bit entry ) */
-+#define ESW_ATABLE_MEM_SIZE (2048*8)
-+/* How many 64-bit elements fit in the address table */
-+#define ESW_ATABLE_MEM_NUM_ENTRIES (2048)
-+/* Address Table Maximum number of entries in each Slot */
-+#define ATABLE_ENTRY_PER_SLOT 8
-+/* log2(ATABLE_ENTRY_PER_SLOT)*/
-+#define ATABLE_ENTRY_PER_SLOT_bits 3
-+/* entry size in byte */
-+#define ATABLE_ENTRY_SIZE 8
-+/* slot size in byte */
-+#define ATABLE_SLOT_SIZE (ATABLE_ENTRY_PER_SLOT * ATABLE_ENTRY_SIZE)
-+/* width of timestamp variable (bits) within address table entry */
-+#define AT_DENTRY_TIMESTAMP_WIDTH 10
-+/* number of bits for port number storage */
-+#define AT_DENTRY_PORT_WIDTH 4
-+/* number of bits for port bitmask number storage */
-+#define AT_SENTRY_PORT_WIDTH 7
-+/* address table static entry port bitmask start address bit */
-+#define AT_SENTRY_PORTMASK_shift 21
-+/* number of bits for port priority storage */
-+#define AT_SENTRY_PRIO_WIDTH 7
-+/* address table static entry priority start address bit */
-+#define AT_SENTRY_PRIO_shift 18
-+/* address table dynamic entry port start address bit */
-+#define AT_DENTRY_PORT_shift 28
-+/* address table dynamic entry timestamp start address bit */
-+#define AT_DENTRY_TIME_shift 18
-+/* address table entry record type start address bit */
-+#define AT_ENTRY_TYPE_shift 17
-+/* address table entry record type bit: 1 static, 0 dynamic */
-+#define AT_ENTRY_TYPE_STATIC 1
-+#define AT_ENTRY_TYPE_DYNAMIC 0
-+/* address table entry record valid start address bit */
-+#define AT_ENTRY_VALID_shift 16
-+#define AT_ENTRY_RECORD_VALID 1
-+
-+#define AT_EXTRACT_VALID(x) \
-+ ((x >> AT_ENTRY_VALID_shift) & AT_ENTRY_RECORD_VALID)
-+
-+#define AT_EXTRACT_PORTMASK(x) \
-+ ((x >> AT_SENTRY_PORTMASK_shift) & AT_SENTRY_PORT_WIDTH)
-+
-+#define AT_EXTRACT_PRIO(x) \
-+ ((x >> AT_SENTRY_PRIO_shift) & AT_SENTRY_PRIO_WIDTH)
-+
-+/* return block corresponding to the 8 bit hash value calculated */
-+#define GET_BLOCK_PTR(hash) (hash << 3)
-+#define AT_EXTRACT_TIMESTAMP(x) \
-+ ((x >> AT_DENTRY_TIME_shift) & ((1 << AT_DENTRY_TIMESTAMP_WIDTH)-1))
-+#define AT_EXTRACT_PORT(x) \
-+ ((x >> AT_DENTRY_PORT_shift) & ((1 << AT_DENTRY_PORT_WIDTH)-1))
-+#define AT_SEXTRACT_PORT(x) \
-+ ((~((x >> AT_SENTRY_PORTMASK_shift) & \
-+ ((1 << AT_DENTRY_PORT_WIDTH)-1))) >> 1)
-+#define TIMEDELTA(newtime, oldtime) \
-+ ((newtime - oldtime) & \
-+ ((1 << AT_DENTRY_TIMESTAMP_WIDTH)-1))
-+
-+#define AT_EXTRACT_IP_PROTOCOL(x) ((x >> 8) & 0xff)
-+#define AT_EXTRACT_TCP_UDP_PORT(x) ((x >> 16) & 0xffff)
-+
-+/* increment time value respecting modulo. */
-+#define TIMEINCREMENT(time) \
-+ ((time) = ((time)+1) & ((1 << AT_DENTRY_TIMESTAMP_WIDTH)-1))
-+/* ------------------------------------------------------------------------- */
-+/* Bit definitions and macros for MCF_ESW_REVISION */
-+#define MCF_ESW_REVISION_CORE_REVISION(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_ESW_REVISION_CUSTOMER_REVISION(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_ESW_PER */
-+#define MCF_ESW_PER_TE0 (0x00000001)
-+#define MCF_ESW_PER_TE1 (0x00000002)
-+#define MCF_ESW_PER_TE2 (0x00000004)
-+#define MCF_ESW_PER_RE0 (0x00010000)
-+#define MCF_ESW_PER_RE1 (0x00020000)
-+#define MCF_ESW_PER_RE2 (0x00040000)
-+
-+/* Bit definitions and macros for MCF_ESW_VLANV */
-+#define MCF_ESW_VLANV_VV0 (0x00000001)
-+#define MCF_ESW_VLANV_VV1 (0x00000002)
-+#define MCF_ESW_VLANV_VV2 (0x00000004)
-+#define MCF_ESW_VLANV_DU0 (0x00010000)
-+#define MCF_ESW_VLANV_DU1 (0x00020000)
-+#define MCF_ESW_VLANV_DU2 (0x00040000)
-+
-+/* Bit definitions and macros for MCF_ESW_DBCR */
-+#define MCF_ESW_DBCR_P0 (0x00000001)
-+#define MCF_ESW_DBCR_P1 (0x00000002)
-+#define MCF_ESW_DBCR_P2 (0x00000004)
-+
-+/* Bit definitions and macros for MCF_ESW_DMCR */
-+#define MCF_ESW_DMCR_P0 (0x00000001)
-+#define MCF_ESW_DMCR_P1 (0x00000002)
-+#define MCF_ESW_DMCR_P2 (0x00000004)
-+
-+/* Bit definitions and macros for MCF_ESW_BKLR */
-+#define MCF_ESW_BKLR_BE0 (0x00000001)
-+#define MCF_ESW_BKLR_BE1 (0x00000002)
-+#define MCF_ESW_BKLR_BE2 (0x00000004)
-+#define MCF_ESW_BKLR_LD0 (0x00010000)
-+#define MCF_ESW_BKLR_LD1 (0x00020000)
-+#define MCF_ESW_BKLR_LD2 (0x00040000)
-+
-+/* Bit definitions and macros for MCF_ESW_BMPC */
-+#define MCF_ESW_BMPC_PORT(x) (((x)&0x0000000F)<<0)
-+#define MCF_ESW_BMPC_MSG_TX (0x00000020)
-+#define MCF_ESW_BMPC_EN (0x00000040)
-+#define MCF_ESW_BMPC_DIS (0x00000080)
-+#define MCF_ESW_BMPC_PRIORITY(x) (((x)&0x00000007)<<13)
-+#define MCF_ESW_BMPC_PORTMASK(x) (((x)&0x00000007)<<16)
-+
-+/* Bit definitions and macros for MCF_ESW_MODE */
-+#define MCF_ESW_MODE_SW_RST (0x00000001)
-+#define MCF_ESW_MODE_SW_EN (0x00000002)
-+#define MCF_ESW_MODE_STOP (0x00000080)
-+#define MCF_ESW_MODE_CRC_TRAN (0x00000100)
-+#define MCF_ESW_MODE_P0CT (0x00000200)
-+#define MCF_ESW_MODE_STATRST (0x80000000)
-+
-+/* Bit definitions and macros for MCF_ESW_VIMSEL */
-+#define MCF_ESW_VIMSEL_IM0(x) (((x)&0x00000003)<<0)
-+#define MCF_ESW_VIMSEL_IM1(x) (((x)&0x00000003)<<2)
-+#define MCF_ESW_VIMSEL_IM2(x) (((x)&0x00000003)<<4)
-+
-+/* Bit definitions and macros for MCF_ESW_VOMSEL */
-+#define MCF_ESW_VOMSEL_OM0(x) (((x)&0x00000003)<<0)
-+#define MCF_ESW_VOMSEL_OM1(x) (((x)&0x00000003)<<2)
-+#define MCF_ESW_VOMSEL_OM2(x) (((x)&0x00000003)<<4)
-+
-+/* Bit definitions and macros for MCF_ESW_VIMEN */
-+#define MCF_ESW_VIMEN_EN0 (0x00000001)
-+#define MCF_ESW_VIMEN_EN1 (0x00000002)
-+#define MCF_ESW_VIMEN_EN2 (0x00000004)
-+
-+/* Bit definitions and macros for MCF_ESW_VID */
-+#define MCF_ESW_VID_TAG(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_MCR */
-+#define MCF_ESW_MCR_PORT(x) (((x)&0x0000000F)<<0)
-+#define MCF_ESW_MCR_MEN (0x00000010)
-+#define MCF_ESW_MCR_INGMAP (0x00000020)
-+#define MCF_ESW_MCR_EGMAP (0x00000040)
-+#define MCF_ESW_MCR_INGSA (0x00000080)
-+#define MCF_ESW_MCR_INGDA (0x00000100)
-+#define MCF_ESW_MCR_EGSA (0x00000200)
-+#define MCF_ESW_MCR_EGDA (0x00000400)
-+
-+/* Bit definitions and macros for MCF_ESW_EGMAP */
-+#define MCF_ESW_EGMAP_EG0 (0x00000001)
-+#define MCF_ESW_EGMAP_EG1 (0x00000002)
-+#define MCF_ESW_EGMAP_EG2 (0x00000004)
-+
-+/* Bit definitions and macros for MCF_ESW_INGMAP */
-+#define MCF_ESW_INGMAP_ING0 (0x00000001)
-+#define MCF_ESW_INGMAP_ING1 (0x00000002)
-+#define MCF_ESW_INGMAP_ING2 (0x00000004)
-+
-+/* Bit definitions and macros for MCF_ESW_INGSAL */
-+#define MCF_ESW_INGSAL_ADDLOW(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_INGSAH */
-+#define MCF_ESW_INGSAH_ADDHIGH(x) (((x)&0x0000FFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_INGDAL */
-+#define MCF_ESW_INGDAL_ADDLOW(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_INGDAH */
-+#define MCF_ESW_INGDAH_ADDHIGH(x) (((x)&0x0000FFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_ENGSAL */
-+#define MCF_ESW_ENGSAL_ADDLOW(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_ENGSAH */
-+#define MCF_ESW_ENGSAH_ADDHIGH(x) (((x)&0x0000FFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_ENGDAL */
-+#define MCF_ESW_ENGDAL_ADDLOW(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_ENGDAH */
-+#define MCF_ESW_ENGDAH_ADDHIGH(x) (((x)&0x0000FFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_MCVAL */
-+#define MCF_ESW_MCVAL_COUNT(x) (((x)&0x000000FF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_MMSR */
-+#define MCF_ESW_MMSR_BUSY (0x00000001)
-+#define MCF_ESW_MMSR_NOCELL (0x00000002)
-+#define MCF_ESW_MMSR_MEMFULL (0x00000004)
-+#define MCF_ESW_MMSR_MFLATCH (0x00000008)
-+#define MCF_ESW_MMSR_DQ_GRNT (0x00000040)
-+#define MCF_ESW_MMSR_CELLS_AVAIL(x) (((x)&0x000000FF)<<16)
-+
-+/* Bit definitions and macros for MCF_ESW_LMT */
-+#define MCF_ESW_LMT_THRESH(x) (((x)&0x000000FF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_LFC */
-+#define MCF_ESW_LFC_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_PCSR */
-+#define MCF_ESW_PCSR_PC0 (0x00000001)
-+#define MCF_ESW_PCSR_PC1 (0x00000002)
-+#define MCF_ESW_PCSR_PC2 (0x00000004)
-+
-+/* Bit definitions and macros for MCF_ESW_IOSR */
-+#define MCF_ESW_IOSR_OR0 (0x00000001)
-+#define MCF_ESW_IOSR_OR1 (0x00000002)
-+#define MCF_ESW_IOSR_OR2 (0x00000004)
-+
-+/* Bit definitions and macros for MCF_ESW_QWT */
-+#define MCF_ESW_QWT_Q0WT(x) (((x)&0x0000001F)<<0)
-+#define MCF_ESW_QWT_Q1WT(x) (((x)&0x0000001F)<<8)
-+#define MCF_ESW_QWT_Q2WT(x) (((x)&0x0000001F)<<16)
-+#define MCF_ESW_QWT_Q3WT(x) (((x)&0x0000001F)<<24)
-+
-+/* Bit definitions and macros for MCF_ESW_P0BCT */
-+#define MCF_ESW_P0BCT_THRESH(x) (((x)&0x000000FF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_P0FFEN */
-+#define MCF_ESW_P0FFEN_FEN (0x00000001)
-+#define MCF_ESW_P0FFEN_FD(x) (((x)&0x00000003)<<2)
-+
-+/* Bit definitions and macros for MCF_ESW_PSNP */
-+#define MCF_ESW_PSNP_EN (0x00000001)
-+#define MCF_ESW_PSNP_MODE(x) (((x)&0x00000003)<<1)
-+#define MCF_ESW_PSNP_CD (0x00000008)
-+#define MCF_ESW_PSNP_CS (0x00000010)
-+#define MCF_ESW_PSNP_PORT_COMPARE(x) (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_ESW_IPSNP */
-+#define MCF_ESW_IPSNP_EN (0x00000001)
-+#define MCF_ESW_IPSNP_MODE(x) (((x)&0x00000003)<<1)
-+#define MCF_ESW_IPSNP_PROTOCOL(x) (((x)&0x000000FF)<<8)
-+
-+/* Bit definitions and macros for MCF_ESW_PVRES */
-+#define MCF_ESW_PVRES_PRI0(x) (((x)&0x00000007)<<0)
-+#define MCF_ESW_PVRES_PRI1(x) (((x)&0x00000007)<<3)
-+#define MCF_ESW_PVRES_PRI2(x) (((x)&0x00000007)<<6)
-+#define MCF_ESW_PVRES_PRI3(x) (((x)&0x00000007)<<9)
-+#define MCF_ESW_PVRES_PRI4(x) (((x)&0x00000007)<<12)
-+#define MCF_ESW_PVRES_PRI5(x) (((x)&0x00000007)<<15)
-+#define MCF_ESW_PVRES_PRI6(x) (((x)&0x00000007)<<18)
-+#define MCF_ESW_PVRES_PRI7(x) (((x)&0x00000007)<<21)
-+
-+/* Bit definitions and macros for MCF_ESW_IPRES */
-+#define MCF_ESW_IPRES_ADDRESS(x) (((x)&0x000000FF)<<0)
-+#define MCF_ESW_IPRES_IPV4SEL (0x00000100)
-+#define MCF_ESW_IPRES_PRI0(x) (((x)&0x00000003)<<9)
-+#define MCF_ESW_IPRES_PRI1(x) (((x)&0x00000003)<<11)
-+#define MCF_ESW_IPRES_PRI2(x) (((x)&0x00000003)<<13)
-+#define MCF_ESW_IPRES_READ (0x80000000)
-+
-+/* Bit definitions and macros for MCF_ESW_PRES */
-+#define MCF_ESW_PRES_VLAN (0x00000001)
-+#define MCF_ESW_PRES_IP (0x00000002)
-+#define MCF_ESW_PRES_MAC (0x00000004)
-+#define MCF_ESW_PRES_DFLT_PRI(x) (((x)&0x00000007)<<4)
-+
-+/* Bit definitions and macros for MCF_ESW_PID */
-+#define MCF_ESW_PID_VLANID(x) (((x)&0x0000FFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_VRES */
-+#define MCF_ESW_VRES_P0 (0x00000001)
-+#define MCF_ESW_VRES_P1 (0x00000002)
-+#define MCF_ESW_VRES_P2 (0x00000004)
-+#define MCF_ESW_VRES_VLANID(x) (((x)&0x00000FFF)<<3)
-+
-+/* Bit definitions and macros for MCF_ESW_DISCN */
-+#define MCF_ESW_DISCN_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_DISCB */
-+#define MCF_ESW_DISCB_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_NDISCN */
-+#define MCF_ESW_NDISCN_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_NDISCB */
-+#define MCF_ESW_NDISCB_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_POQC */
-+#define MCF_ESW_POQC_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_PMVID */
-+#define MCF_ESW_PMVID_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_PMVTAG */
-+#define MCF_ESW_PMVTAG_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_PBL */
-+#define MCF_ESW_PBL_COUNT(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_ISR */
-+#define MCF_ESW_ISR_EBERR (0x00000001)
-+#define MCF_ESW_ISR_RXB (0x00000002)
-+#define MCF_ESW_ISR_RXF (0x00000004)
-+#define MCF_ESW_ISR_TXB (0x00000008)
-+#define MCF_ESW_ISR_TXF (0x00000010)
-+#define MCF_ESW_ISR_QM (0x00000020)
-+#define MCF_ESW_ISR_OD0 (0x00000040)
-+#define MCF_ESW_ISR_OD1 (0x00000080)
-+#define MCF_ESW_ISR_OD2 (0x00000100)
-+#define MCF_ESW_ISR_LRN (0x00000200)
-+
-+/* Bit definitions and macros for MCF_ESW_IMR */
-+#define MCF_ESW_IMR_EBERR (0x00000001)
-+#define MCF_ESW_IMR_RXB (0x00000002)
-+#define MCF_ESW_IMR_RXF (0x00000004)
-+#define MCF_ESW_IMR_TXB (0x00000008)
-+#define MCF_ESW_IMR_TXF (0x00000010)
-+#define MCF_ESW_IMR_QM (0x00000020)
-+#define MCF_ESW_IMR_OD0 (0x00000040)
-+#define MCF_ESW_IMR_OD1 (0x00000080)
-+#define MCF_ESW_IMR_OD2 (0x00000100)
-+#define MCF_ESW_IMR_LRN (0x00000200)
-+
-+/* Bit definitions and macros for MCF_ESW_RDSR */
-+#define MCF_ESW_RDSR_ADDRESS(x) (((x)&0x3FFFFFFF)<<2)
-+
-+/* Bit definitions and macros for MCF_ESW_TDSR */
-+#define MCF_ESW_TDSR_ADDRESS(x) (((x)&0x3FFFFFFF)<<2)
-+
-+/* Bit definitions and macros for MCF_ESW_MRBR */
-+#define MCF_ESW_MRBR_SIZE(x) (((x)&0x000003FF)<<4)
-+
-+/* Bit definitions and macros for MCF_ESW_RDAR */
-+#define MCF_ESW_RDAR_R_DES_ACTIVE (0x01000000)
-+
-+/* Bit definitions and macros for MCF_ESW_TDAR */
-+#define MCF_ESW_TDAR_X_DES_ACTIVE (0x01000000)
-+
-+/* Bit definitions and macros for MCF_ESW_LREC0 */
-+#define MCF_ESW_LREC0_MACADDR0(x) (((x)&0xFFFFFFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_ESW_LREC1 */
-+#define MCF_ESW_LREC1_MACADDR1(x) (((x)&0x0000FFFF)<<0)
-+#define MCF_ESW_LREC1_HASH(x) (((x)&0x000000FF)<<16)
-+#define MCF_ESW_LREC1_SWPORT(x) (((x)&0x00000003)<<24)
-+
-+/* Bit definitions and macros for MCF_ESW_LSR */
-+#define MCF_ESW_LSR_DA (0x00000001)
-+
-+/* port mirroring port number match */
-+#define MIRROR_EGRESS_PORT_MATCH 1
-+#define MIRROR_INGRESS_PORT_MATCH 2
-+
-+/* port mirroring mac address match */
-+#define MIRROR_EGRESS_SOURCE_MATCH 1
-+#define MIRROR_INGRESS_SOURCE_MATCH 2
-+#define MIRROR_EGRESS_DESTINATION_MATCH 3
-+#define MIRROR_INGRESS_DESTINATION_MATCH 4
-+
-+#endif /* SWITCH_H */
---- a/include/linux/fsl_devices.h
-+++ b/include/linux/fsl_devices.h
-@@ -129,4 +129,21 @@ struct fsl_ata_platform_data {
- void (*exit)(void);
- int (*get_clk_rate)(void);
- };
-+
-+struct net_device;
-+struct coldfire_switch_platform_data {
-+ int hash_table;
-+ unsigned int *switch_hw;
-+ void (*request_intrs)(struct net_device *dev,
-+ irqreturn_t (*)(int, void *),
-+ void *irq_privatedata);
-+ void (*set_mii)(struct net_device *dev);
-+ void (*get_mac)(struct net_device *dev);
-+ void (*enable_phy_intr)(void);
-+ void (*disable_phy_intr)(void);
-+ void (*phy_ack_intr)(void);
-+ void (*localhw_setup)(void);
-+ void (*uncache)(unsigned long addr);
-+ void (*platform_flush_cache)(void);
-+};
- #endif /* _FSL_DEVICE_H_ */
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -4756,6 +4756,10 @@ static int dev_ifsioc(struct net *net, s
- default:
- if ((cmd >= SIOCDEVPRIVATE &&
- cmd <= SIOCDEVPRIVATE + 15) ||
-+#if defined(CONFIG_MODELO_SWITCH)
-+ (cmd >= 0x9101 &&
-+ cmd <= 0x92ff) ||
-+#endif
- cmd == SIOCBONDENSLAVE ||
- cmd == SIOCBONDRELEASE ||
- cmd == SIOCBONDSETHWADDR ||
-@@ -4948,6 +4952,10 @@ int dev_ioctl(struct net *net, unsigned
- */
- default:
- if (cmd == SIOCWANDEV ||
-+#if defined(CONFIG_MODELO_SWITCH)
-+ (cmd >= 0x9101 &&
-+ cmd <= 0x92ff) ||
-+#endif
- (cmd >= SIOCDEVPRIVATE &&
- cmd <= SIOCDEVPRIVATE + 15)) {
- dev_load(net, ifr.ifr_name);
diff --git a/target/linux/coldfire/patches/022-Redefine-I-O-read-and-write-functions.patch b/target/linux/coldfire/patches/022-Redefine-I-O-read-and-write-functions.patch
deleted file mode 100644
index 921891b..0000000
--- a/target/linux/coldfire/patches/022-Redefine-I-O-read-and-write-functions.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f8dab3ef2c0da1c50dee07142c0b8088da61bc82 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:45 +0800
-Subject: [PATCH 22/52] Redefine I/O read and write functions
-
-Redefine readb(), writeb(), readw(), writew(), readl(), write()
-functions.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/include/asm/cf_io.h | 10 ++++++++++
- 1 files changed, 10 insertions(+), 0 deletions(-)
-
---- a/arch/m68k/include/asm/cf_io.h
-+++ b/arch/m68k/include/asm/cf_io.h
-@@ -20,6 +20,16 @@
-
- #include <asm-generic/iomap.h>
-
-+/*
-+ * These should be valid on any ioremap()ed region
-+ */
-+#define readb(addr) in_8(addr)
-+#define writeb(val, addr) out_8((addr), (val))
-+#define readw(addr) in_le16(addr)
-+#define writew(val, addr) out_le16((addr), (val))
-+#define readl(addr) in_le32(addr)
-+#define writel(val, addr) out_le32((addr), (val))
-+
- #define readb_relaxed(addr) readb(addr)
- #define readw_relaxed(addr) readw(addr)
- #define readl_relaxed(addr) readl(addr)
diff --git a/target/linux/coldfire/patches/023-Replace-readl-and-writel-for-FEC-driver.patch b/target/linux/coldfire/patches/023-Replace-readl-and-writel-for-FEC-driver.patch
deleted file mode 100644
index d873602..0000000
--- a/target/linux/coldfire/patches/023-Replace-readl-and-writel-for-FEC-driver.patch
+++ /dev/null
@@ -1,357 +0,0 @@
-From f7df9a8f3ce3a600ceeb7302bf0de899f321c818 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:45 +0800
-Subject: [PATCH 23/52] Replace readl and writel for FEC driver
-
-Replace readl and writel by fec_readl and fec_writel
-for FEC driver.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/net/fec.c | 129 ++++++++++++++++++++++++++++-------------------------
- 1 files changed, 68 insertions(+), 61 deletions(-)
-
---- a/drivers/net/fec.c
-+++ b/drivers/net/fec.c
-@@ -244,6 +244,11 @@ static void fec_stop(struct net_device *
- /* Transmitter timeout */
- #define TX_TIMEOUT (2 * HZ)
-
-+#define fec_readl(addr) \
-+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-+#define fec_writel(b, addr) \
-+ (void)((*(volatile unsigned int *) (addr)) = (b))
-+
- static void *swap_buffer(void *bufaddr, int len)
- {
- int i;
-@@ -347,7 +352,7 @@ fec_enet_start_xmit(struct sk_buff *skb,
- bdp->cbd_sc = status;
-
- /* Trigger transmission start */
-- writel(0, fep->hwp + FEC_X_DES_ACTIVE);
-+ fec_writel(0, fep->hwp + FEC_X_DES_ACTIVE);
-
- /* If this was the last BD in the ring, start at the beginning again. */
- if (status & BD_ENET_TX_WRAP)
-@@ -390,8 +395,8 @@ fec_enet_interrupt(int irq, void * dev_i
- irqreturn_t ret = IRQ_NONE;
-
- do {
-- int_events = readl(fep->hwp + FEC_IEVENT);
-- writel(int_events, fep->hwp + FEC_IEVENT);
-+ int_events = fec_readl(fep->hwp + FEC_IEVENT);
-+ fec_writel(int_events, fep->hwp + FEC_IEVENT);
-
- #ifdef CONFIG_FEC_1588
- if (__raw_readb(MCF_DTIM1_DTER) & MCF_DTIM_DTER_REF)
-@@ -646,7 +651,7 @@ rx_processing_done:
- * incoming frames. On a heavily loaded network, we should be
- * able to keep up at the expense of system resources.
- */
-- writel(0, fep->hwp + FEC_R_DES_ACTIVE);
-+ fec_writel(0, fep->hwp + FEC_R_DES_ACTIVE);
- }
- fep->cur_rx = bdp;
-
-@@ -686,9 +691,9 @@ static void __inline__ fec_get_mac(struc
- */
- if (!is_valid_ether_addr(iap)) {
- *((unsigned long *) &tmpaddr[0]) =
-- be32_to_cpu(readl(fep->hwp + FEC_ADDR_LOW));
-+ be32_to_cpu(fec_readl(fep->hwp + FEC_ADDR_LOW));
- *((unsigned short *) &tmpaddr[4]) =
-- be16_to_cpu(readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
-+ be16_to_cpu(fec_readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
- iap = &tmpaddr[0];
- }
-
-@@ -740,9 +745,9 @@ static void fec_enet_adjust_link(struct
-
- if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
- #ifdef CONFIG_FEC_1588
-- writel(0x00000012, fep->hwp + FEC_ECNTRL);
-+ fec_writel(0x00000012, fep->hwp + FEC_ECNTRL);
- #else
-- writel(0x00000002, fep->hwp + FEC_ECNTRL);
-+ fec_writel(0x00000002, fep->hwp + FEC_ECNTRL);
- #endif
- status_change = 1;
- }
-@@ -763,7 +768,7 @@ static int fec_enet_mdio_read(struct mii
- init_completion(&fep->mdio_done);
-
- /* start a read op */
-- writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
-+ fec_writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
- FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
- FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
-
-@@ -777,7 +782,7 @@ static int fec_enet_mdio_read(struct mii
- }
-
- /* return value */
-- return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
-+ return FEC_MMFR_DATA(fec_readl(fep->hwp + FEC_MII_DATA));
- }
-
- static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-@@ -790,7 +795,7 @@ static int fec_enet_mdio_write(struct mi
- init_completion(&fep->mdio_done);
-
- /* start a write op */
-- writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
-+ fec_writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
- FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
- FEC_MMFR_TA | FEC_MMFR_DATA(value),
- fep->hwp + FEC_MII_DATA);
-@@ -905,7 +910,7 @@ static int fec_enet_mii_init(struct plat
- * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
- */
- fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000) << 1;
-- writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
-+ fec_writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
-
- fep->mii_bus = mdiobus_alloc();
- if (fep->mii_bus == NULL) {
-@@ -1151,30 +1156,30 @@ static void set_multicast_list(struct ne
- unsigned char hash;
-
- if (dev->flags & IFF_PROMISC) {
-- tmp = readl(fep->hwp + FEC_R_CNTRL);
-+ tmp = fec_readl(fep->hwp + FEC_R_CNTRL);
- tmp |= 0x8;
-- writel(tmp, fep->hwp + FEC_R_CNTRL);
-+ fec_writel(tmp, fep->hwp + FEC_R_CNTRL);
- return;
- }
-
-- tmp = readl(fep->hwp + FEC_R_CNTRL);
-+ tmp = fec_readl(fep->hwp + FEC_R_CNTRL);
- tmp &= ~0x8;
-- writel(tmp, fep->hwp + FEC_R_CNTRL);
-+ fec_writel(tmp, fep->hwp + FEC_R_CNTRL);
-
- if (dev->flags & IFF_ALLMULTI) {
- /* Catch all multicast addresses, so set the
- * filter to all 1's
- */
-- writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-- writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-+ fec_writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-+ fec_writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-
- return;
- }
-
- /* Clear filter and add the addresses in hash register
- */
-- writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-- writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-+ fec_writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-+ fec_writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-
- netdev_for_each_mc_addr(ha, dev) {
- /* Only support group multicast for now */
-@@ -1198,13 +1203,13 @@ static void set_multicast_list(struct ne
- hash = (crc >> (32 - HASH_BITS)) & 0x3f;
-
- if (hash > 31) {
-- tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-+ tmp = fec_readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
- tmp |= 1 << (hash - 32);
-- writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-+ fec_writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
- } else {
-- tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-+ tmp = fec_readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW);
- tmp |= 1 << hash;
-- writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-+ fec_writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
- }
- }
- }
-@@ -1221,10 +1226,10 @@ fec_set_mac_address(struct net_device *d
-
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
-- writel(dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
-+ fec_writel(dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
- (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24),
- fep->hwp + FEC_ADDR_LOW);
-- writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
-+ fec_writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
- fep->hwp + FEC_ADDR_HIGH);
- return 0;
- }
-@@ -1323,7 +1328,7 @@ fec_restart(struct net_device *dev, int
- u32 val, temp_mac[2];
-
- /* Whack a reset. We should wait for this. */
-- writel(1, fep->hwp + FEC_ECNTRL);
-+ fec_writel(1, fep->hwp + FEC_ECNTRL);
- udelay(10);
-
- /*
-@@ -1332,31 +1337,32 @@ fec_restart(struct net_device *dev, int
- */
- if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
- memcpy(&temp_mac, dev->dev_addr, ETH_ALEN);
-- writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW);
-- writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
-+ fec_writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW);
-+ fec_writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
- }
-
- #ifdef CONFIG_FEC_1588
-- writel(0x7fff8000, fep->hwp + FEC_IEVENT);
-+ fec_writel(0x7fff8000, fep->hwp + FEC_IEVENT);
- #else
- /* Clear any outstanding interrupt. */
-- writel(0xffc00000, fep->hwp + FEC_IEVENT);
-+ fec_writel(0xffc00000, fep->hwp + FEC_IEVENT);
- #endif
-
- /* Reset all multicast. */
-- writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-- writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-+ fec_writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-+ fec_writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
- #ifndef CONFIG_M5272
-- writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
-- writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
-+ fec_writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
-+ fec_writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
- #endif
-
- /* Set maximum receive buffer size. */
-- writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
-+ fec_writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
-
- /* Set receive and transmit descriptor base. */
-- writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
-- writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE,
-+ fec_writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
-+ fec_writel((unsigned long)fep->bd_dma +
-+ sizeof(struct bufdesc) * RX_RING_SIZE,
- fep->hwp + FEC_X_DES_START);
-
- fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-@@ -1374,24 +1380,24 @@ fec_restart(struct net_device *dev, int
- /* Enable MII mode */
- if (duplex) {
- /* MII enable / FD enable */
-- writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL);
-- writel(0x04, fep->hwp + FEC_X_CNTRL);
-+ fec_writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL);
-+ fec_writel(0x04, fep->hwp + FEC_X_CNTRL);
- } else {
- /* MII enable / No Rcv on Xmit */
-- writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL);
-- writel(0x0, fep->hwp + FEC_X_CNTRL);
-+ fec_writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL);
-+ fec_writel(0x0, fep->hwp + FEC_X_CNTRL);
- }
- fep->full_duplex = duplex;
-
- /* Set MII speed */
-- writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
-+ fec_writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
-
- /*
- * The phy interface and speed need to get configured
- * differently on enet-mac.
- */
- if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
-- val = readl(fep->hwp + FEC_R_CNTRL);
-+ val = fec_readl(fep->hwp + FEC_R_CNTRL);
-
- /* MII or RMII */
- if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
-@@ -1405,23 +1411,23 @@ fec_restart(struct net_device *dev, int
- else
- val |= (1 << 9);
-
-- writel(val, fep->hwp + FEC_R_CNTRL);
-+ fec_writel(val, fep->hwp + FEC_R_CNTRL);
- } else {
- #ifdef FEC_MIIGSK_ENR
- if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
- /* disable the gasket and wait */
-- writel(0, fep->hwp + FEC_MIIGSK_ENR);
-- while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
-+ fec_writel(0, fep->hwp + FEC_MIIGSK_ENR);
-+ while (fec_readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
- udelay(1);
-
- /*
- * configure the gasket:
- * RMII, 50 MHz, no loopback, no echo
- */
-- writel(1, fep->hwp + FEC_MIIGSK_CFGR);
-+ fec_writel(1, fep->hwp + FEC_MIIGSK_CFGR);
-
- /* re-enable the gasket */
-- writel(2, fep->hwp + FEC_MIIGSK_ENR);
-+ fec_writel(2, fep->hwp + FEC_MIIGSK_ENR);
- }
- #endif
- }
-@@ -1433,22 +1439,22 @@ fec_restart(struct net_device *dev, int
- ret = fec_ptp_start(fep->ptp_priv);
- if (ret) {
- fep->ptimer_present = 0;
-- writel(2, fep->hwp + FEC_ECNTRL);
-+ fec_writel(2, fep->hwp + FEC_ECNTRL);
- } else {
-- val = readl(fep->hwp + FEC_ECNTRL);
-+ val = fec_readl(fep->hwp + FEC_ECNTRL);
- val |= 0x00000012;
-- writel(val, fep->hwp + FEC_ECNTRL);
-+ fec_writel(val, fep->hwp + FEC_ECNTRL);
- }
- } else
-- writel(2, fep->hwp + FEC_ECNTRL);
-+ fec_writel(2, fep->hwp + FEC_ECNTRL);
- #else
- /* And last, enable the transmit and receive processing */
-- writel(2, fep->hwp + FEC_ECNTRL);
-+ fec_writel(2, fep->hwp + FEC_ECNTRL);
- #endif
-- writel(0, fep->hwp + FEC_R_DES_ACTIVE);
-+ fec_writel(0, fep->hwp + FEC_R_DES_ACTIVE);
-
- /* Enable interrupts we wish to service */
-- writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
-+ fec_writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
- }
-
- static void
-@@ -1458,21 +1464,22 @@ fec_stop(struct net_device *dev)
-
- /* We cannot expect a graceful transmit stop without link !!! */
- if (fep->link) {
-- writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */
-+ /* Graceful transmit stop */
-+ fec_writel(1, fep->hwp + FEC_X_CNTRL);
- udelay(10);
-- if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
-+ if (!(fec_readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
- printk("fec_stop : Graceful transmit stop did not complete !\n");
- }
-
- /* Whack a reset. We should wait for this. */
-- writel(1, fep->hwp + FEC_ECNTRL);
-+ fec_writel(1, fep->hwp + FEC_ECNTRL);
- udelay(10);
-- writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
-+ fec_writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
- #ifdef CONFIG_FEC_1588
- if (fep->ptimer_present)
- fec_ptp_stop(fep->ptp_priv);
- #endif
-- writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
-+ fec_writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
- }
-
- static int __devinit
diff --git a/target/linux/coldfire/patches/024-Add-SEC-1.1-support-for-MCF547x-and-MCF548x.patch b/target/linux/coldfire/patches/024-Add-SEC-1.1-support-for-MCF547x-and-MCF548x.patch
deleted file mode 100644
index 53cebe1..0000000
--- a/target/linux/coldfire/patches/024-Add-SEC-1.1-support-for-MCF547x-and-MCF548x.patch
+++ /dev/null
@@ -1,2093 +0,0 @@
-From c925421b8c35357427499f3d298777535c2c6cfd Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:45 +0800
-Subject: [PATCH 24/52] Add SEC 1.1 support for MCF547x and MCF548x
-
-Add SEC 1.1 support for MCF547x and MCF548x. The SEC driver is
-in drivers/crypto.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m547x/mcf548x-devices.c | 2 +-
- arch/m68k/include/asm/cf_io.h | 4 +
- crypto/testmgr.c | 18 +-
- drivers/crypto/Kconfig | 13 +
- drivers/crypto/Makefile | 1 +
- drivers/crypto/cf_talitos.c | 1727 ++++++++++++++++++++++++++++
- drivers/crypto/cf_talitos.h | 229 ++++
- 7 files changed, 1989 insertions(+), 5 deletions(-)
- create mode 100644 drivers/crypto/cf_talitos.c
- create mode 100644 drivers/crypto/cf_talitos.h
-
---- a/arch/m68k/coldfire/m547x/mcf548x-devices.c
-+++ b/arch/m68k/coldfire/m547x/mcf548x-devices.c
-@@ -54,7 +54,7 @@ static struct resource coldfire_sec_reso
- };
-
- static struct platform_device coldfire_sec_device = {
-- .name = "fsl-sec1",
-+ .name = "talitos",
- .id = -1,
- .num_resources = ARRAY_SIZE(coldfire_sec_resources),
- .resource = coldfire_sec_resources,
---- a/arch/m68k/include/asm/cf_io.h
-+++ b/arch/m68k/include/asm/cf_io.h
-@@ -192,4 +192,8 @@ static inline void memcpy_toio(volatile
- #define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
- #endif /* readb */
-
-+/* access ports */
-+#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
-+#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
-+
- #endif /* _IO_H */
---- a/crypto/testmgr.c
-+++ b/crypto/testmgr.c
-@@ -212,7 +212,11 @@ static int test_hash(struct crypto_ahash
- tcrypt_complete, &tresult);
-
- j = 0;
-+#if defined(CONFIG_CRYPTO_DEV_CF_TALITOS)
-+ for (i = 1; i < tcount; i++) {
-+#else
- for (i = 0; i < tcount; i++) {
-+#endif
- if (template[i].np)
- continue;
-
-@@ -276,7 +280,9 @@ static int test_hash(struct crypto_ahash
- hexdump(result, crypto_ahash_digestsize(tfm));
- ret = -EINVAL;
- goto out;
-- }
-+ } else
-+ printk(KERN_INFO "alg: hash: Test %d succeed for %s\n",
-+ j, algo);
- }
-
- j = 0;
-@@ -344,7 +350,9 @@ static int test_hash(struct crypto_ahash
- hexdump(result, crypto_ahash_digestsize(tfm));
- ret = -EINVAL;
- goto out;
-- }
-+ } else
-+ printk(KERN_INFO "alg: hash: Chunking test %d "
-+ "succeed for %s\n", j, algo);
- }
- }
-
-@@ -788,7 +796,6 @@ static int test_skcipher(struct crypto_a
- else
- e = "decryption";
-
-- printk(KERN_INFO "%s testing %s %s\n", __func__, algo, e);
- init_completion(&result.completion);
-
- req = ablkcipher_request_alloc(tfm, GFP_KERNEL);
-@@ -963,7 +970,10 @@ static int test_skcipher(struct crypto_a
- "%u for %s\n", j, e, k, algo);
- hexdump(q, template[i].tap[k]);
- goto out;
-- }
-+ } else
-+ printk(KERN_INFO "alg: skcipher: Chunk "
-+ "test %d pass on %s for %s\n",
-+ j, e, algo);
-
- q += template[i].tap[k];
- for (n = 0; offset_in_page(q + n) && q[n]; n++)
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -282,6 +282,19 @@ config CRYPTO_DEV_TALITOS
- To compile this driver as a module, choose M here: the module
- will be called talitos.
-
-+config CRYPTO_DEV_CF_TALITOS
-+ tristate "Talitos Freescale Coldfire Security Engine (SEC)"
-+ select CRYPTO_ALGAPI
-+ select CRYPTO_AUTHENC
-+ select HW_RANDOM
-+ depends on (M547X || M548X)
-+ help
-+ Say 'Y' here to use the Freescale Coldfire Security Engine (SEC)
-+ to offload cryptographic algorithm computation.
-+
-+ The Freescale SEC is present on Coldfire MCF547x and MCF548x
-+ processors.
-+
- config CRYPTO_DEV_IXP4XX
- tristate "Driver for IXP4xx crypto hardware acceleration"
- depends on ARCH_IXP4XX
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -6,6 +6,7 @@ n2_crypto-y := n2_core.o n2_asm.o
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
- obj-$(CONFIG_CRYPTO_DEV_MV_CESA) += mv_cesa.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
-+obj-$(CONFIG_CRYPTO_DEV_CF_TALITOS) += cf_talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
- obj-$(CONFIG_CRYPTO_DEV_MCFCAU) += mcfcau.o
- obj-$(CONFIG_CRYPTO_DEV_MCFCAU_DES) += mcfcau-des.o
---- /dev/null
-+++ b/drivers/crypto/cf_talitos.c
-@@ -0,0 +1,1727 @@
-+/*
-+ * cf_talitos - Freescale Coldfire Integrated Security Engine
-+ * (SEC) device driver
-+ *
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Alison Wang <b18965@freescale.com>
-+ * based on talitos.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/crypto.h>
-+#include <linux/hw_random.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/io.h>
-+#include <linux/spinlock.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/slab.h>
-+
-+#include <crypto/algapi.h>
-+#include <crypto/aes.h>
-+#include <crypto/des.h>
-+#include <crypto/sha.h>
-+#include <crypto/md5.h>
-+#include <crypto/aead.h>
-+#include <crypto/authenc.h>
-+#include <crypto/skcipher.h>
-+#include <crypto/hash.h>
-+#include <crypto/internal/hash.h>
-+#include <crypto/scatterwalk.h>
-+
-+#include <asm/m5485sim.h>
-+#include "cf_talitos.h"
-+
-+#define TALITOS_TIMEOUT 100000
-+#define TALITOS_MAX_DATA_LEN 65535
-+
-+#define DESC_TYPE(desc_hdr) (((desc_hdr) >> 4) & 0xf)
-+#define PRIMARY_EU(desc_hdr) (((desc_hdr) >> 28) & 0xf)
-+#define SECONDARY_EU(desc_hdr) (((desc_hdr) >> 16) & 0xf)
-+
-+#define CF_TALITOS_DEBUG 0
-+#if CF_TALITOS_DEBUG
-+#define dprintk(args...) printk(args)
-+#else
-+#define dprintk(...)
-+#endif
-+
-+/* descriptor pointer entry */
-+struct talitos_ptr {
-+ u32 len; /* length */
-+ u32 ptr; /* address */
-+};
-+
-+static const struct talitos_ptr zero_entry = {
-+ .len = 0,
-+ .ptr = 0
-+};
-+
-+/* descriptor */
-+struct talitos_desc {
-+ u32 hdr; /* header */
-+ struct talitos_ptr ptr[7]; /* ptr/len pair array */
-+ u32 next_hdr;
-+};
-+
-+/**
-+ * talitos_request - descriptor submission request
-+ * @desc: descriptor pointer (kernel virtual)
-+ * @dma_desc: descriptor's physical bus address
-+ * @callback: whom to call when descriptor processing is done
-+ * @context: caller context (optional)
-+ */
-+struct talitos_request {
-+ struct talitos_desc *desc;
-+ dma_addr_t dma_desc;
-+ void (*callback) (struct device *dev, struct talitos_desc *desc,
-+ void *context, int error);
-+ void *context;
-+};
-+
-+/* per-channel fifo management */
-+struct talitos_channel {
-+ /* request fifo */
-+ struct talitos_request *fifo;
-+
-+ /* number of requests pending in channel h/w fifo */
-+ atomic_t submit_count ____cacheline_aligned;
-+
-+ /* request submission (head) lock */
-+ spinlock_t head_lock ____cacheline_aligned;
-+ /* index to next free descriptor request */
-+ int head;
-+
-+ /* request release (tail) lock */
-+ spinlock_t tail_lock ____cacheline_aligned;
-+ /* index to next in-progress/done descriptor request */
-+ int tail;
-+};
-+
-+struct talitos_private {
-+ struct device *dev;
-+ struct platform_device *pdev;
-+ void __iomem *reg;
-+ int irq;
-+
-+ /* SEC version geometry (from device tree node) */
-+ unsigned int num_channels;
-+ unsigned int chfifo_len;
-+ unsigned int exec_units;
-+ unsigned int desc_types;
-+
-+ /* SEC Compatibility info */
-+ unsigned long features;
-+
-+ /*
-+ * length of the request fifo
-+ * fifo_len is chfifo_len rounded up to next power of 2
-+ * so we can use bitwise ops to wrap
-+ */
-+ unsigned int fifo_len;
-+
-+ struct talitos_channel *chan;
-+
-+ /* next channel to be assigned next incoming descriptor */
-+ atomic_t last_chan ____cacheline_aligned;
-+
-+ /* request callback tasklet */
-+ struct tasklet_struct done_task;
-+
-+ /* list of registered algorithms */
-+ struct list_head alg_list;
-+
-+ /* hwrng device */
-+ struct hwrng rng;
-+};
-+
-+/* .features flag */
-+#define TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT 0x00000001
-+#define TALITOS_FTR_HW_AUTH_CHECK 0x00000002
-+#define TALITOS_FTR_SHA224_HWINIT 0x00000004
-+
-+/*
-+ * map virtual single (contiguous) pointer to h/w descriptor pointer
-+ */
-+static void map_single_talitos_ptr(struct device *dev,
-+ struct talitos_ptr *talitos_ptr,
-+ unsigned short len, void *data,
-+ unsigned char extent,
-+ enum dma_data_direction dir)
-+{
-+ dma_addr_t dma_addr = dma_map_single(dev, data, len, dir);
-+
-+ talitos_ptr->len = len;
-+ talitos_ptr->ptr = dma_addr;
-+}
-+
-+/*
-+ * unmap bus single (contiguous) h/w descriptor pointer
-+ */
-+static void unmap_single_talitos_ptr(struct device *dev,
-+ struct talitos_ptr *talitos_ptr,
-+ enum dma_data_direction dir)
-+{
-+ dma_unmap_single(dev, talitos_ptr->ptr, talitos_ptr->len, dir);
-+}
-+
-+static int reset_channel(struct device *dev, int ch)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ unsigned int timeout = TALITOS_TIMEOUT;
-+
-+ setbits32(priv->reg + TALITOS_CCCR(ch), TALITOS_CCCR_RESET);
-+
-+ while ((in_be32(priv->reg + TALITOS_CCCR(ch)) &
-+ TALITOS_CCCR_RESET) && --timeout)
-+ cpu_relax();
-+
-+ if (timeout == 0) {
-+ dev_err(dev, "failed to reset channel %d\n", ch);
-+ return -EIO;
-+ }
-+
-+ /* set 36-bit addressing, done writeback enable and done IRQ enable */
-+ setbits32(priv->reg + TALITOS_CCCR(ch), TALITOS_CCCR_NE |
-+ TALITOS_CCCR_NT | TALITOS_CCCR_CDWE |
-+ TALITOS_CCCR_CDIE);
-+
-+ return 0;
-+}
-+
-+static int reset_device(struct device *dev)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ unsigned int timeout = TALITOS_TIMEOUT;
-+
-+ setbits32(priv->reg + TALITOS_MCR, TALITOS_MCR_SWR);
-+
-+ while ((in_be32(priv->reg + TALITOS_MCR) & TALITOS_MCR_SWR)
-+ && --timeout)
-+ cpu_relax();
-+
-+ if (timeout == 0) {
-+ dev_err(dev, "failed to reset device\n");
-+ return -EIO;
-+ }
-+
-+ setbits32(priv->reg + TALITOS_DEURCR, TALITOS_DEURCR_RESET);
-+ setbits32(priv->reg + TALITOS_AFEURCR, TALITOS_AFEURCR_RESET);
-+ setbits32(priv->reg + TALITOS_AESURCR, TALITOS_AESURCR_RESET);
-+ setbits32(priv->reg + TALITOS_MDEURCR, TALITOS_MDEURCR_RESET);
-+ setbits32(priv->reg + TALITOS_RNGRCR, TALITOS_RNGRCR_SR);
-+ return 0;
-+}
-+
-+/*
-+ * Reset and initialize the device
-+ */
-+static int init_device(struct device *dev)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ int ch, err;
-+
-+ /*
-+ * Master reset
-+ * errata documentation: warning: certain SEC interrupts
-+ * are not fully cleared by writing the MCR:SWR bit,
-+ * set bit twice to completely reset
-+ */
-+ err = reset_device(dev);
-+ if (err)
-+ return err;
-+
-+ err = reset_device(dev);
-+ if (err)
-+ return err;
-+
-+ /* reset channels */
-+ for (ch = 0; ch < priv->num_channels; ch++) {
-+ err = reset_channel(dev, ch);
-+ if (err)
-+ return err;
-+ }
-+
-+ /* enable channel done and error interrupts */
-+ out_be32(priv->reg + TALITOS_IMR, 0);
-+ out_be32(priv->reg + TALITOS_IMR_LO, 0);
-+
-+ out_be32(priv->reg + TALITOS_ICR,
-+ TALITOS_ICR_CHERR | TALITOS_ICR_CHDONE);
-+ out_be32(priv->reg + TALITOS_ICR_LO,
-+ TALITOS_ICR_LO_CHERR | TALITOS_ICR_LO_CHDONE);
-+
-+ return 0;
-+}
-+
-+/**
-+ * talitos_submit - submits a descriptor to the device for processing
-+ * @dev: the SEC device to be used
-+ * @desc: the descriptor to be processed by the device
-+ * @callback: whom to call when processing is complete
-+ * @context: a handle for use by caller (optional)
-+ *
-+ * desc must contain valid dma-mapped (bus physical) address pointers.
-+ * callback must check err and feedback in descriptor header
-+ * for device processing status.
-+ */
-+static int talitos_submit(struct device *dev, struct talitos_desc *desc,
-+ void (*callback)(struct device *dev,
-+ struct talitos_desc *desc,
-+ void *context, int error),
-+ void *context)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ struct talitos_request *request;
-+ unsigned long flags, ch;
-+ int head;
-+
-+ /* ignore key parity check in triple DES */
-+ if (((desc->hdr & DESC_HDR_SEL0_MASK) == DESC_HDR_SEL0_DEU) &&
-+ (desc->hdr & DESC_HDR_MODE0_DEU_3DES))
-+ setbits32(priv->reg + TALITOS_DEUIMR, TALITOS_DEUIMR_KPE_MASK);
-+
-+ /* select done notification */
-+ desc->hdr |= DESC_HDR_DONE;
-+
-+ /* emulate SEC's round-robin channel fifo polling scheme */
-+ ch = atomic_inc_return(&priv->last_chan) & (priv->num_channels - 1);
-+
-+ spin_lock_irqsave(&priv->chan[ch].head_lock, flags);
-+
-+ head = priv->chan[ch].head;
-+ request = &priv->chan[ch].fifo[head];
-+
-+ /* map descriptor and save caller data */
-+ request->dma_desc = dma_map_single(dev, desc, sizeof(*desc),
-+ DMA_BIDIRECTIONAL);
-+ request->callback = callback;
-+ request->context = context;
-+
-+ /* increment fifo head */
-+ priv->chan[ch].head = (priv->chan[ch].head + 1) & (priv->fifo_len - 1);
-+
-+ smp_wmb();
-+ request->desc = desc;
-+
-+ /* GO! */
-+ wmb();
-+ out_be32(priv->reg + TALITOS_FF(ch), request->dma_desc);
-+
-+ spin_unlock_irqrestore(&priv->chan[ch].head_lock, flags);
-+
-+ return -EINPROGRESS;
-+}
-+
-+/*
-+ * process what was done, notify callback of error if not
-+ */
-+static void flush_channel(struct device *dev, int ch, int error, int reset_ch)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ struct talitos_request *request, saved_req;
-+ unsigned long flags;
-+ int tail, status;
-+
-+ spin_lock_irqsave(&priv->chan[ch].tail_lock, flags);
-+
-+ tail = priv->chan[ch].tail;
-+ while (priv->chan[ch].fifo[tail].desc) {
-+ request = &priv->chan[ch].fifo[tail];
-+
-+ /* descriptors with their done bits set don't get the error */
-+ rmb();
-+ if ((request->desc->hdr & DESC_HDR_DONE) == DESC_HDR_DONE)
-+ status = 0;
-+ else
-+ if (!error)
-+ break;
-+ else
-+ status = error;
-+
-+ dma_unmap_single(dev, request->dma_desc,
-+ sizeof(struct talitos_desc),
-+ DMA_BIDIRECTIONAL);
-+
-+ /* copy entries so we can call callback outside lock */
-+ saved_req.desc = request->desc;
-+ saved_req.callback = request->callback;
-+ saved_req.context = request->context;
-+
-+ /* release request entry in fifo */
-+ smp_wmb();
-+ request->desc = NULL;
-+
-+ /* increment fifo tail */
-+ priv->chan[ch].tail = (tail + 1) & (priv->fifo_len - 1);
-+
-+ spin_unlock_irqrestore(&priv->chan[ch].tail_lock, flags);
-+
-+ atomic_dec(&priv->chan[ch].submit_count);
-+
-+ saved_req.callback(dev, saved_req.desc, saved_req.context,
-+ status);
-+ /* channel may resume processing in single desc error case */
-+ if (error && !reset_ch && status == error)
-+ return;
-+ spin_lock_irqsave(&priv->chan[ch].tail_lock, flags);
-+ tail = priv->chan[ch].tail;
-+ }
-+
-+ spin_unlock_irqrestore(&priv->chan[ch].tail_lock, flags);
-+}
-+
-+/*
-+ * process completed requests for channels that have done status
-+ */
-+static void talitos_done(unsigned long data)
-+{
-+ struct device *dev = (struct device *)data;
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ int ch;
-+
-+ for (ch = 0; ch < priv->num_channels; ch++)
-+ flush_channel(dev, ch, 0, 0);
-+
-+ /* At this point, all completed channels have been processed.
-+ * Unmask done interrupts for channels completed later on.
-+ */
-+ out_be32(priv->reg + TALITOS_IMR, 0);
-+ out_be32(priv->reg + TALITOS_IMR_LO, 0);
-+
-+ out_be32(priv->reg + TALITOS_ICR,
-+ TALITOS_ICR_CHERR | TALITOS_ICR_CHDONE);
-+ out_be32(priv->reg + TALITOS_ICR_LO,
-+ TALITOS_ICR_LO_CHERR | TALITOS_ICR_LO_CHDONE);
-+}
-+
-+/*
-+ * locate current (offending) descriptor
-+ */
-+static struct talitos_desc *current_desc(struct device *dev, int ch)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ int tail = priv->chan[ch].tail;
-+ dma_addr_t cur_desc;
-+
-+ cur_desc = in_be32(priv->reg + TALITOS_CDPR(ch));
-+
-+ while (priv->chan[ch].fifo[tail].dma_desc != cur_desc) {
-+ tail = (tail + 1) & (priv->fifo_len - 1);
-+ if (tail == priv->chan[ch].tail) {
-+ dev_err(dev, "couldn't locate current descriptor\n");
-+ return NULL;
-+ }
-+ }
-+
-+ return priv->chan[ch].fifo[tail].desc;
-+}
-+
-+/*
-+ * user diagnostics; report root cause of error based on execution unit status
-+ */
-+static void report_eu_error(struct device *dev, int ch,
-+ struct talitos_desc *desc)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ int i;
-+
-+ switch (desc->hdr & DESC_HDR_SEL0_MASK) {
-+ case DESC_HDR_SEL0_AFEU:
-+ dev_err(dev, "AFEUISR 0x%08x\n",
-+ in_be32(priv->reg + TALITOS_AFEUISR));
-+ break;
-+ case DESC_HDR_SEL0_DEU:
-+ dev_err(dev, "DEUISR 0x%08x\n",
-+ in_be32(priv->reg + TALITOS_DEUISR));
-+ break;
-+ case DESC_HDR_SEL0_MDEU:
-+ dev_err(dev, "MDEUISR 0x%08x\n",
-+ in_be32(priv->reg + TALITOS_MDEUISR));
-+ break;
-+ case DESC_HDR_SEL0_RNG:
-+ dev_err(dev, "RNGISR 0x%08x\n",
-+ in_be32(priv->reg + TALITOS_RNGISR));
-+ break;
-+ case DESC_HDR_SEL0_AESU:
-+ dev_err(dev, "AESUISR 0x%08x\n",
-+ in_be32(priv->reg + TALITOS_AESUISR));
-+ break;
-+ }
-+
-+ switch (desc->hdr & DESC_HDR_SEL1_MASK) {
-+ case DESC_HDR_SEL1_MDEU:
-+ dev_err(dev, "MDEUISR 0x%08x\n",
-+ in_be32(priv->reg + TALITOS_MDEUISR));
-+ break;
-+ }
-+
-+ for (i = 0; i < 8; i++)
-+ dev_err(dev, "DESCBUF 0x%08x\n",
-+ in_be32(priv->reg + TALITOS_DESCBUF(ch) + 8 * i));
-+}
-+
-+/*
-+ * recover from error interrupts
-+ */
-+static void talitos_error(unsigned long data, u32 isr, u32 isr_lo)
-+{
-+ struct device *dev = (struct device *)data;
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ int ch, error, reset_ch = 0;
-+ u32 v, v_lo;
-+
-+ for (ch = 0; ch < priv->num_channels; ch++) {
-+ /* skip channels without errors */
-+ if (!((isr >> 29) & (1 << (ch * 2))))
-+ continue;
-+
-+ error = -EINVAL;
-+
-+ v = in_be32(priv->reg + TALITOS_CCPSR(ch));
-+ v_lo = in_be32(priv->reg + TALITOS_CCPSR_LO(ch));
-+
-+ if (v_lo & TALITOS_CCPSR_LO_TEA)
-+ dev_err(dev, "master data transfer error\n");
-+ if (v_lo & TALITOS_CCPSR_LO_PERR)
-+ dev_err(dev, "fetch pointer not complete error\n");
-+ if (v_lo & TALITOS_CCPSR_LO_DERR)
-+ dev_err(dev, "illegal descriptor header error\n");
-+ if (v_lo & TALITOS_CCPSR_LO_SERR)
-+ dev_err(dev, "static assignment error\n");
-+ if (v_lo & TALITOS_CCPSR_LO_EUERR)
-+ report_eu_error(dev, ch, current_desc(dev, ch));
-+
-+ flush_channel(dev, ch, error, reset_ch);
-+
-+ if (reset_ch)
-+ reset_channel(dev, ch);
-+ }
-+
-+ /* purge request queues */
-+ for (ch = 0; ch < priv->num_channels; ch++)
-+ flush_channel(dev, ch, -EIO, 1);
-+
-+ /* reset and reinitialize the device */
-+ init_device(dev);
-+}
-+
-+static irqreturn_t talitos_interrupt(int irq, void *data)
-+{
-+ struct device *dev = data;
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ u32 isr, isr_lo;
-+
-+ isr = in_be32(priv->reg + TALITOS_ISR);
-+ isr_lo = in_be32(priv->reg + TALITOS_ISR_LO);
-+ /* Acknowledge interrupt */
-+ out_be32(priv->reg + TALITOS_ICR, isr);
-+ out_be32(priv->reg + TALITOS_ICR_LO, isr_lo);
-+
-+ if (unlikely(isr & ~TALITOS_ISR_CHDONE)) {
-+ talitos_error((unsigned long)data, isr, isr_lo);
-+ } else if (likely(isr & TALITOS_ISR_CHDONE)) {
-+ /* mask further done interrupts. */
-+ setbits32(priv->reg + TALITOS_IMR, TALITOS_IMR_DONE);
-+ /* done_task will unmask done interrupts at exit */
-+ tasklet_schedule(&priv->done_task);
-+ }
-+
-+ return (isr || isr_lo) ? IRQ_HANDLED : IRQ_NONE;
-+}
-+
-+
-+/*
-+ * crypto alg
-+ */
-+#define TALITOS_CRA_PRIORITY 3000
-+#define TALITOS_MAX_KEY_SIZE 64
-+#define TALITOS_MAX_IV_LENGTH 16
-+#define TALITOS_MAX_OUTPUTDATA_SIZE 64
-+#define TALITOS_MAX_INPUTDATA_SIZE 64
-+
-+#define ARC4_MIN_KEY_SIZE 4
-+#define ARC4_MAX_KEY_SIZE 16
-+#define ARC4_BLOCK_SIZE 64
-+#define MD5_BLOCK_SIZE 64
-+
-+struct talitos_ctx {
-+ struct device *dev;
-+ __be32 desc_hdr_template;
-+ u8 key[TALITOS_MAX_KEY_SIZE];
-+ u8 iv[TALITOS_MAX_IV_LENGTH];
-+ unsigned int keylen;
-+ unsigned int enckeylen;
-+ unsigned int authkeylen;
-+ unsigned int authsize;
-+};
-+
-+#define HASH_MAX_BLOCK_SIZE SHA512_BLOCK_SIZE
-+#define TALITOS_MDEU_MAX_CONTEXT_SIZE \
-+ TALITOS_MDEU_CONTEXT_SIZE_MD5_SHA1_SHA256
-+
-+struct talitos_ahash_req_ctx {
-+ u32 hw_context[TALITOS_MDEU_MAX_CONTEXT_SIZE / sizeof(u32)];
-+ unsigned int hw_context_size;
-+ u8 buf[HASH_MAX_BLOCK_SIZE];
-+ u8 bufnext[HASH_MAX_BLOCK_SIZE];
-+ unsigned int swinit;
-+ unsigned int first;
-+ unsigned int last;
-+ unsigned int to_hash_later;
-+ u64 nbuf;
-+ struct scatterlist bufsl[2];
-+ struct scatterlist *psrc;
-+};
-+
-+/*
-+ * talitos_edesc - s/w-extended descriptor
-+ * @src_nents: number of segments in input scatterlist
-+ * @dst_nents: number of segments in output scatterlist
-+ * @desc: h/w descriptor
-+ *
-+ * if decrypting (with authcheck), or either one of src_nents or dst_nents
-+ * is greater than 1, an integrity check value is concatenated to the end
-+ * of link_tbl data
-+ */
-+struct talitos_edesc {
-+ int src_nents;
-+ int dst_nents;
-+ int src_is_chained;
-+ int dst_is_chained;
-+ struct talitos_desc desc;
-+ u8 src_buf[TALITOS_MAX_INPUTDATA_SIZE];
-+ u8 dst_buf[TALITOS_MAX_OUTPUTDATA_SIZE];
-+};
-+
-+static int talitos_map_sg(struct device *dev, struct scatterlist *sg,
-+ unsigned int nents, enum dma_data_direction dir,
-+ int chained)
-+{
-+ if (unlikely(chained))
-+ while (sg) {
-+ dma_map_sg(dev, sg, 1, dir);
-+ sg = scatterwalk_sg_next(sg);
-+ }
-+ else
-+ dma_map_sg(dev, sg, nents, dir);
-+ return nents;
-+}
-+
-+static void talitos_unmap_sg_chain(struct device *dev, struct scatterlist *sg,
-+ enum dma_data_direction dir)
-+{
-+ while (sg) {
-+ dma_unmap_sg(dev, sg, 1, dir);
-+ sg = scatterwalk_sg_next(sg);
-+ }
-+}
-+
-+static void talitos_sg_unmap(struct device *dev,
-+ struct talitos_edesc *edesc,
-+ struct scatterlist *src,
-+ struct scatterlist *dst)
-+{
-+ unsigned int src_nents = edesc->src_nents ? : 1;
-+ unsigned int dst_nents = edesc->dst_nents ? : 1;
-+
-+ if (src != dst) {
-+ if (edesc->src_is_chained)
-+ talitos_unmap_sg_chain(dev, src, DMA_TO_DEVICE);
-+ else
-+ dma_unmap_sg(dev, src, src_nents, DMA_TO_DEVICE);
-+
-+ if (dst) {
-+ if (edesc->dst_is_chained)
-+ talitos_unmap_sg_chain(dev, dst,
-+ DMA_FROM_DEVICE);
-+ else
-+ dma_unmap_sg(dev, dst, dst_nents,
-+ DMA_FROM_DEVICE);
-+ }
-+ } else
-+ if (edesc->src_is_chained)
-+ talitos_unmap_sg_chain(dev, src, DMA_BIDIRECTIONAL);
-+ else
-+ dma_unmap_sg(dev, src, src_nents, DMA_BIDIRECTIONAL);
-+}
-+
-+/*
-+ * derive number of elements in scatterlist
-+ */
-+static int sg_count(struct scatterlist *sg_list, int nbytes, int *chained)
-+{
-+ struct scatterlist *sg = sg_list;
-+ int sg_nents = 0;
-+
-+ *chained = 0;
-+ while (nbytes > 0) {
-+ sg_nents++;
-+ nbytes -= sg->length;
-+ if (!sg_is_last(sg) && (sg + 1)->length == 0)
-+ *chained = 1;
-+ sg = scatterwalk_sg_next(sg);
-+ }
-+
-+ return sg_nents;
-+}
-+
-+/**
-+ * sg_copy_end_to_buffer - Copy end data from SG list to a linear buffer
-+ * @sgl: The SG list
-+ * @nents: Number of SG entries
-+ * @buf: Where to copy to
-+ * @buflen: The number of bytes to copy
-+ * @skip: The number of bytes to skip before copying.
-+ * Note: skip + buflen should equal SG total size.
-+ *
-+ * Returns the number of copied bytes.
-+ *
-+ **/
-+static size_t sg_copy_end_to_buffer(struct scatterlist *sgl, unsigned int nents,
-+ void *buf, size_t buflen, unsigned int skip)
-+{
-+ unsigned int offset = 0;
-+ unsigned int boffset = 0;
-+ struct sg_mapping_iter miter;
-+ unsigned long flags;
-+ unsigned int sg_flags = SG_MITER_ATOMIC;
-+ size_t total_buffer = buflen + skip;
-+
-+ sg_flags |= SG_MITER_FROM_SG;
-+
-+ sg_miter_start(&miter, sgl, nents, sg_flags);
-+
-+ local_irq_save(flags);
-+
-+ while (sg_miter_next(&miter) && offset < total_buffer) {
-+ unsigned int len;
-+ unsigned int ignore;
-+
-+ if ((offset + miter.length) > skip) {
-+ if (offset < skip) {
-+ /* Copy part of this segment */
-+ ignore = skip - offset;
-+ len = miter.length - ignore;
-+ if (boffset + len > buflen)
-+ len = buflen - boffset;
-+ memcpy(buf + boffset, miter.addr + ignore, len);
-+ } else {
-+ /* Copy all of this segment (up to buflen) */
-+ len = miter.length;
-+ if (boffset + len > buflen)
-+ len = buflen - boffset;
-+ memcpy(buf + boffset, miter.addr, len);
-+ }
-+ boffset += len;
-+ }
-+ offset += miter.length;
-+ }
-+
-+ sg_miter_stop(&miter);
-+
-+ local_irq_restore(flags);
-+ return boffset;
-+}
-+
-+/*
-+ * allocate and map the extended descriptor
-+ */
-+static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
-+ struct scatterlist *src,
-+ struct scatterlist *dst,
-+ int hash_result,
-+ unsigned int cryptlen,
-+ unsigned int authsize,
-+ int icv_stashing,
-+ u32 cryptoflags)
-+{
-+ struct talitos_edesc *edesc;
-+ int src_nents, dst_nents, alloc_len;
-+ int src_chained, dst_chained = 0;
-+ gfp_t flags = cryptoflags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL :
-+ GFP_ATOMIC;
-+
-+ if (cryptlen + authsize > TALITOS_MAX_DATA_LEN) {
-+ dev_err(dev, "length exceeds h/w max limit\n");
-+ return ERR_PTR(-EINVAL);
-+ }
-+
-+ src_nents = sg_count(src, cryptlen + authsize, &src_chained);
-+ src_nents = (src_nents == 1) ? 0 : src_nents;
-+
-+ if (hash_result) {
-+ dst_nents = 0;
-+ } else {
-+ if (dst == src) {
-+ dst_nents = src_nents;
-+ } else {
-+ dst_nents = sg_count(dst, cryptlen + authsize,
-+ &dst_chained);
-+ dst_nents = (dst_nents == 1) ? 0 : dst_nents;
-+ }
-+ }
-+
-+ /*
-+ * allocate space for base edesc plus the link tables,
-+ * allowing for two separate entries for ICV and generated ICV (+ 2),
-+ * and the ICV data itself
-+ */
-+ alloc_len = sizeof(struct talitos_edesc);
-+
-+ edesc = kmalloc(alloc_len, GFP_KERNEL | flags);
-+ if (!edesc) {
-+ dev_err(dev, "could not allocate edescriptor\n");
-+ return ERR_PTR(-ENOMEM);
-+ }
-+
-+ edesc->src_nents = src_nents;
-+ edesc->dst_nents = dst_nents;
-+ edesc->src_is_chained = src_chained;
-+ edesc->dst_is_chained = dst_chained;
-+ return edesc;
-+}
-+
-+static int ablkcipher_setkey(struct crypto_ablkcipher *cipher,
-+ const u8 *key, unsigned int keylen)
-+{
-+ struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
-+ struct ablkcipher_alg *alg = crypto_ablkcipher_alg(cipher);
-+
-+ if (keylen > TALITOS_MAX_KEY_SIZE)
-+ goto badkey;
-+
-+ if (keylen < alg->min_keysize || keylen > alg->max_keysize)
-+ goto badkey;
-+
-+ memcpy(&ctx->key, key, keylen);
-+ ctx->keylen = keylen;
-+
-+ return 0;
-+
-+badkey:
-+ crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+ return -EINVAL;
-+}
-+
-+static void common_nonsnoop_unmap(struct device *dev,
-+ struct talitos_edesc *edesc,
-+ struct ablkcipher_request *areq)
-+{
-+ unmap_single_talitos_ptr(dev, &edesc->desc.ptr[5], DMA_FROM_DEVICE);
-+ unmap_single_talitos_ptr(dev, &edesc->desc.ptr[2], DMA_TO_DEVICE);
-+ unmap_single_talitos_ptr(dev, &edesc->desc.ptr[1], DMA_TO_DEVICE);
-+
-+ talitos_sg_unmap(dev, edesc, areq->src, areq->dst);
-+}
-+
-+static void ablkcipher_done(struct device *dev,
-+ struct talitos_desc *desc, void *context,
-+ int err)
-+{
-+ struct ablkcipher_request *areq = context;
-+ struct talitos_edesc *edesc;
-+
-+ edesc = container_of(desc, struct talitos_edesc, desc);
-+
-+ if (edesc->dst_nents != 0)
-+ sg_copy_from_buffer(areq->dst, edesc->dst_nents,
-+ edesc->dst_buf, areq->nbytes);
-+
-+ common_nonsnoop_unmap(dev, edesc, areq);
-+
-+ kfree(edesc);
-+
-+ areq->base.complete(&areq->base, err);
-+}
-+
-+static int common_nonsnoop(struct talitos_edesc *edesc,
-+ struct ablkcipher_request *areq,
-+ u8 *giv,
-+ void (*callback) (struct device *dev,
-+ struct talitos_desc *desc,
-+ void *context, int error))
-+{
-+ struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
-+ struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
-+ struct device *dev = ctx->dev;
-+ struct talitos_desc *desc = &edesc->desc;
-+ unsigned int cryptlen = areq->nbytes;
-+ unsigned int ivsize;
-+ int sg_count, ret;
-+
-+ desc->next_hdr = 0;
-+
-+ /* first DWORD empty */
-+ desc->ptr[0] = zero_entry;
-+
-+ /* cipher iv */
-+ ivsize = crypto_ablkcipher_ivsize(cipher);
-+ map_single_talitos_ptr(dev, &desc->ptr[1], ivsize, giv ?: areq->info, 0,
-+ DMA_TO_DEVICE);
-+
-+ /* AFEU using a key */
-+ if (((desc->hdr & DESC_HDR_SEL0_MASK) == DESC_HDR_SEL0_AFEU) &&
-+ ((desc->hdr & DESC_HDR_MODE0_MASK) ==
-+ DESC_HDR_MODE0_AFEU_USE_KEY))
-+ desc->ptr[1] = zero_entry;
-+
-+ /* cipher key */
-+ map_single_talitos_ptr(dev, &desc->ptr[2], ctx->keylen,
-+ (char *)&ctx->key, 0, DMA_TO_DEVICE);
-+
-+ /* AFEU using context */
-+ if (((desc->hdr & DESC_HDR_SEL0_MASK) == DESC_HDR_SEL0_AFEU) &&
-+ ((desc->hdr & DESC_HDR_MODE0_MASK) ==
-+ DESC_HDR_MODE0_AFEU_USE_CONTEXT))
-+ desc->ptr[2] = zero_entry;
-+
-+ /*
-+ * cipher in
-+ */
-+ desc->ptr[3].len = cpu_to_be16(cryptlen);
-+
-+ sg_count = talitos_map_sg(dev, areq->src, edesc->src_nents ? : 1,
-+ (areq->src == areq->dst) ? DMA_BIDIRECTIONAL
-+ : DMA_TO_DEVICE,
-+ edesc->src_is_chained);
-+
-+ if (sg_count == 1)
-+ desc->ptr[3].ptr = sg_dma_address(areq->src);
-+ else {
-+ sg_copy_to_buffer(areq->src, sg_count, edesc->src_buf,
-+ desc->ptr[3].len);
-+ desc->ptr[3].ptr = (u32)edesc->src_buf;
-+ }
-+
-+ /* cipher out */
-+ desc->ptr[4].len = cpu_to_be16(cryptlen);
-+
-+ if (areq->src != areq->dst)
-+ sg_count = talitos_map_sg(dev, areq->dst,
-+ edesc->dst_nents ? : 1,
-+ DMA_FROM_DEVICE,
-+ edesc->dst_is_chained);
-+
-+ if (sg_count == 1)
-+ desc->ptr[4].ptr = sg_dma_address(areq->dst);
-+ else
-+ desc->ptr[4].ptr = (u32)edesc->dst_buf;
-+
-+ /* iv out */
-+ map_single_talitos_ptr(dev, &desc->ptr[5], ivsize, ctx->iv, 0,
-+ DMA_FROM_DEVICE);
-+
-+ /* last DWORD empty */
-+ desc->ptr[6] = zero_entry;
-+
-+ ret = talitos_submit(dev, desc, callback, areq);
-+ if (ret != -EINPROGRESS) {
-+ common_nonsnoop_unmap(dev, edesc, areq);
-+ kfree(edesc);
-+ }
-+ return ret;
-+}
-+
-+static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request *
-+ areq)
-+{
-+ struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
-+ struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
-+
-+ return talitos_edesc_alloc(ctx->dev, areq->src, areq->dst, 0,
-+ areq->nbytes, 0, 0, areq->base.flags);
-+}
-+
-+static int ablkcipher_encrypt(struct ablkcipher_request *areq)
-+{
-+ struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
-+ struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
-+ struct talitos_edesc *edesc;
-+
-+ /* allocate extended descriptor */
-+ edesc = ablkcipher_edesc_alloc(areq);
-+ if (IS_ERR(edesc))
-+ return PTR_ERR(edesc);
-+
-+ /* set encrypt except AFEU */
-+ if ((ctx->desc_hdr_template & DESC_HDR_SEL0_MASK) == DESC_HDR_SEL0_AFEU)
-+ edesc->desc.hdr = ctx->desc_hdr_template;
-+ else
-+ edesc->desc.hdr = ctx->desc_hdr_template |
-+ DESC_HDR_MODE0_ENCRYP;
-+
-+ return common_nonsnoop(edesc, areq, NULL, ablkcipher_done);
-+}
-+
-+static int ablkcipher_decrypt(struct ablkcipher_request *areq)
-+{
-+ struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
-+ struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
-+ struct talitos_edesc *edesc;
-+
-+ /* allocate extended descriptor */
-+ edesc = ablkcipher_edesc_alloc(areq);
-+ if (IS_ERR(edesc))
-+ return PTR_ERR(edesc);
-+
-+ edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND;
-+
-+ return common_nonsnoop(edesc, areq, NULL, ablkcipher_done);
-+}
-+
-+static void common_nonsnoop_hash_unmap(struct device *dev,
-+ struct talitos_edesc *edesc,
-+ struct ahash_request *areq)
-+{
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+
-+ unmap_single_talitos_ptr(dev, &edesc->desc.ptr[5], DMA_FROM_DEVICE);
-+
-+ /* When using hashctx-in, must unmap it. */
-+ if (edesc->desc.ptr[1].len)
-+ unmap_single_talitos_ptr(dev, &edesc->desc.ptr[1],
-+ DMA_TO_DEVICE);
-+
-+ if (edesc->desc.ptr[2].len)
-+ unmap_single_talitos_ptr(dev, &edesc->desc.ptr[2],
-+ DMA_TO_DEVICE);
-+
-+ talitos_sg_unmap(dev, edesc, req_ctx->psrc, NULL);
-+}
-+
-+static void ahash_done(struct device *dev,
-+ struct talitos_desc *desc, void *context,
-+ int err)
-+{
-+ struct ahash_request *areq = context;
-+ struct talitos_edesc *edesc =
-+ container_of(desc, struct talitos_edesc, desc);
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+
-+ if (!req_ctx->last && req_ctx->to_hash_later) {
-+ /* Position any partial block for next update/final/finup */
-+ memcpy(req_ctx->buf, req_ctx->bufnext, req_ctx->to_hash_later);
-+ req_ctx->nbuf = req_ctx->to_hash_later;
-+ }
-+ common_nonsnoop_hash_unmap(dev, edesc, areq);
-+
-+ kfree(edesc);
-+
-+ areq->base.complete(&areq->base, err);
-+}
-+
-+static int common_nonsnoop_hash(struct talitos_edesc *edesc,
-+ struct ahash_request *areq, unsigned int length,
-+ void (*callback) (struct device *dev,
-+ struct talitos_desc *desc,
-+ void *context, int error))
-+{
-+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
-+ struct talitos_ctx *ctx = crypto_ahash_ctx(tfm);
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+ struct device *dev = ctx->dev;
-+ struct talitos_desc *desc = &edesc->desc;
-+ int sg_count, ret;
-+
-+ desc->next_hdr = 0;
-+
-+ /* first DWORD empty */
-+ desc->ptr[0] = zero_entry;
-+
-+ /* hash context in */
-+ if (!req_ctx->first || req_ctx->swinit) {
-+ map_single_talitos_ptr(dev, &desc->ptr[1],
-+ req_ctx->hw_context_size,
-+ (char *)req_ctx->hw_context, 0,
-+ DMA_TO_DEVICE);
-+ req_ctx->swinit = 0;
-+ } else {
-+ desc->ptr[1] = zero_entry;
-+ /* Indicate next op is not the first. */
-+ req_ctx->first = 0;
-+ }
-+
-+ /* HMAC key */
-+ if (ctx->keylen)
-+ map_single_talitos_ptr(dev, &desc->ptr[2], ctx->keylen,
-+ (char *)&ctx->key, 0, DMA_TO_DEVICE);
-+ else
-+ desc->ptr[2] = zero_entry;
-+
-+ /*
-+ * data in
-+ */
-+ desc->ptr[3].len = length;
-+ sg_count = talitos_map_sg(dev, req_ctx->psrc,
-+ edesc->src_nents ? : 1,
-+ DMA_TO_DEVICE,
-+ edesc->src_is_chained);
-+
-+ if (sg_count == 1)
-+ desc->ptr[3].ptr = sg_dma_address(req_ctx->psrc);
-+ else {
-+ sg_copy_to_buffer(req_ctx->psrc, sg_count, edesc->src_buf,
-+ desc->ptr[3].len);
-+ desc->ptr[3].ptr = (u32)edesc->src_buf;
-+ }
-+
-+ /* fifth DWORD empty */
-+ desc->ptr[4] = zero_entry;
-+
-+ /* hash/HMAC out -or- hash context out */
-+ if (req_ctx->last)
-+ map_single_talitos_ptr(dev, &desc->ptr[5],
-+ crypto_ahash_digestsize(tfm),
-+ areq->result, 0, DMA_FROM_DEVICE);
-+ else
-+ map_single_talitos_ptr(dev, &desc->ptr[5],
-+ req_ctx->hw_context_size,
-+ req_ctx->hw_context, 0, DMA_FROM_DEVICE);
-+
-+ /* last DWORD empty */
-+ desc->ptr[6] = zero_entry;
-+
-+ ret = talitos_submit(dev, desc, callback, areq);
-+ if (ret != -EINPROGRESS) {
-+ common_nonsnoop_hash_unmap(dev, edesc, areq);
-+ kfree(edesc);
-+ }
-+ return ret;
-+}
-+
-+static struct talitos_edesc *ahash_edesc_alloc(struct ahash_request *areq,
-+ unsigned int nbytes)
-+{
-+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
-+ struct talitos_ctx *ctx = crypto_ahash_ctx(tfm);
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+
-+ return talitos_edesc_alloc(ctx->dev, req_ctx->psrc, NULL, 1,
-+ nbytes, 0, 0, areq->base.flags);
-+}
-+
-+static int ahash_init(struct ahash_request *areq)
-+{
-+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+
-+ /* Initialize the context */
-+ req_ctx->nbuf = 0;
-+ req_ctx->first = 1; /* first indicates h/w must init its context */
-+ req_ctx->swinit = 0; /* assume h/w init of context */
-+ req_ctx->hw_context_size =
-+ (crypto_ahash_digestsize(tfm) <= SHA256_DIGEST_SIZE)
-+ ? TALITOS_MDEU_CONTEXT_SIZE_MD5_SHA1_SHA256
-+ : TALITOS_MDEU_CONTEXT_SIZE_SHA384_SHA512;
-+
-+ return 0;
-+}
-+
-+/*
-+ * on h/w without explicit sha224 support, we initialize h/w context
-+ * manually with sha224 constants, and tell it to run sha256.
-+ */
-+static int ahash_init_sha224_swinit(struct ahash_request *areq)
-+{
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+
-+ ahash_init(areq);
-+ req_ctx->swinit = 1;/* prevent h/w initting context with sha256 values*/
-+
-+ req_ctx->hw_context[0] = SHA224_H0;
-+ req_ctx->hw_context[1] = SHA224_H1;
-+ req_ctx->hw_context[2] = SHA224_H2;
-+ req_ctx->hw_context[3] = SHA224_H3;
-+ req_ctx->hw_context[4] = SHA224_H4;
-+ req_ctx->hw_context[5] = SHA224_H5;
-+ req_ctx->hw_context[6] = SHA224_H6;
-+ req_ctx->hw_context[7] = SHA224_H7;
-+
-+ /* init 64-bit count */
-+ req_ctx->hw_context[8] = 0;
-+ req_ctx->hw_context[9] = 0;
-+
-+ return 0;
-+}
-+
-+static int ahash_process_req(struct ahash_request *areq, unsigned int nbytes)
-+{
-+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
-+ struct talitos_ctx *ctx = crypto_ahash_ctx(tfm);
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+ struct talitos_edesc *edesc;
-+ unsigned int blocksize =
-+ crypto_tfm_alg_blocksize(crypto_ahash_tfm(tfm));
-+ unsigned int nbytes_to_hash;
-+ unsigned int to_hash_later;
-+ unsigned int nsg;
-+ int chained;
-+
-+ if (!req_ctx->last && (nbytes + req_ctx->nbuf <= blocksize)) {
-+ /* Buffer up to one whole block */
-+ sg_copy_to_buffer(areq->src,
-+ sg_count(areq->src, nbytes, &chained),
-+ req_ctx->buf + req_ctx->nbuf, nbytes);
-+ req_ctx->nbuf += nbytes;
-+ return 0;
-+ }
-+
-+ /* At least (blocksize + 1) bytes are available to hash */
-+ nbytes_to_hash = nbytes + req_ctx->nbuf;
-+ to_hash_later = nbytes_to_hash & (blocksize - 1);
-+
-+ if (req_ctx->last)
-+ to_hash_later = 0;
-+ else if (to_hash_later)
-+ /* There is a partial block. Hash the full block(s) now */
-+ nbytes_to_hash -= to_hash_later;
-+ else {
-+ /* Keep one block buffered */
-+ nbytes_to_hash -= blocksize;
-+ to_hash_later = blocksize;
-+ }
-+
-+ /* Chain in any previously buffered data */
-+ if (req_ctx->nbuf) {
-+ nsg = (req_ctx->nbuf < nbytes_to_hash) ? 2 : 1;
-+ sg_init_table(req_ctx->bufsl, nsg);
-+ sg_set_buf(req_ctx->bufsl, req_ctx->buf, req_ctx->nbuf);
-+ if (nsg > 1)
-+ scatterwalk_sg_chain(req_ctx->bufsl, 2, areq->src);
-+ req_ctx->psrc = req_ctx->bufsl;
-+ } else
-+ req_ctx->psrc = areq->src;
-+
-+ if (to_hash_later) {
-+ int nents = sg_count(areq->src, nbytes, &chained);
-+ sg_copy_end_to_buffer(areq->src, nents,
-+ req_ctx->bufnext,
-+ to_hash_later,
-+ nbytes - to_hash_later);
-+ }
-+ req_ctx->to_hash_later = to_hash_later;
-+
-+ /* Allocate extended descriptor */
-+ edesc = ahash_edesc_alloc(areq, nbytes_to_hash);
-+ if (IS_ERR(edesc))
-+ return PTR_ERR(edesc);
-+
-+ edesc->desc.hdr = ctx->desc_hdr_template;
-+
-+ /* On last one, request SEC to pad; otherwise continue */
-+ if (req_ctx->last)
-+ edesc->desc.hdr |= DESC_HDR_MODE0_MDEU_PAD;
-+ else
-+ edesc->desc.hdr |= DESC_HDR_MODE0_MDEU_CONT;
-+
-+ /* request SEC to INIT hash. */
-+ if (req_ctx->first && !req_ctx->swinit)
-+ edesc->desc.hdr |= DESC_HDR_MODE0_MDEU_INIT;
-+
-+ /* When the tfm context has a keylen, it's an HMAC.
-+ * A first or last (ie. not middle) descriptor must request HMAC.
-+ */
-+ if (ctx->keylen && (req_ctx->first || req_ctx->last))
-+ edesc->desc.hdr |= DESC_HDR_MODE0_MDEU_HMAC;
-+
-+ return common_nonsnoop_hash(edesc, areq, nbytes_to_hash,
-+ ahash_done);
-+}
-+
-+static int ahash_update(struct ahash_request *areq)
-+{
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+
-+ req_ctx->last = 0;
-+
-+ return ahash_process_req(areq, areq->nbytes);
-+}
-+
-+static int ahash_final(struct ahash_request *areq)
-+{
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+
-+ req_ctx->last = 1;
-+
-+ return ahash_process_req(areq, 0);
-+}
-+
-+static int ahash_finup(struct ahash_request *areq)
-+{
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+
-+ req_ctx->last = 1;
-+
-+ return ahash_process_req(areq, areq->nbytes);
-+}
-+
-+static int ahash_digest(struct ahash_request *areq)
-+{
-+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
-+ struct crypto_ahash *ahash = crypto_ahash_reqtfm(areq);
-+
-+ ahash->init(areq);
-+ req_ctx->last = 1;
-+
-+ return ahash_process_req(areq, areq->nbytes);
-+}
-+
-+struct talitos_alg_template {
-+ u32 type;
-+ union {
-+ struct crypto_alg crypto;
-+ struct ahash_alg hash;
-+ } alg;
-+ __be32 desc_hdr_template;
-+};
-+
-+static struct talitos_alg_template driver_algs[] = {
-+ /* ABLKCIPHER algorithms. */
-+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
-+ .alg.crypto = {
-+ .cra_name = "ecb(arc4)",
-+ .cra_driver_name = "ecb-arc4-talitos",
-+ .cra_blocksize = ARC4_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
-+ CRYPTO_ALG_ASYNC,
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_ablkcipher = {
-+ .setkey = ablkcipher_setkey,
-+ .encrypt = ablkcipher_encrypt,
-+ .decrypt = ablkcipher_decrypt,
-+ .geniv = "eseqiv",
-+ .min_keysize = ARC4_MIN_KEY_SIZE,
-+ .max_keysize = ARC4_MAX_KEY_SIZE,
-+ .ivsize = ARC4_BLOCK_SIZE,
-+ }
-+ },
-+ .desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_AFEU |
-+ DESC_HDR_SEL0_AFEU |
-+ DESC_HDR_MODE0_AFEU_USE_KEY,
-+ },
-+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
-+ .alg.crypto = {
-+ .cra_name = "cbc(aes)",
-+ .cra_driver_name = "cbc-aes-talitos",
-+ .cra_blocksize = AES_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
-+ CRYPTO_ALG_ASYNC,
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_ablkcipher = {
-+ .setkey = ablkcipher_setkey,
-+ .encrypt = ablkcipher_encrypt,
-+ .decrypt = ablkcipher_decrypt,
-+ .geniv = "eseqiv",
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ }
-+ },
-+ .desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
-+ DESC_HDR_SEL0_AESU |
-+ DESC_HDR_MODE0_AESU_CBC,
-+ },
-+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
-+ .alg.crypto = {
-+ .cra_name = "cbc(des)",
-+ .cra_driver_name = "cbc-des-talitos",
-+ .cra_blocksize = DES_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
-+ CRYPTO_ALG_ASYNC,
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_ablkcipher = {
-+ .setkey = ablkcipher_setkey,
-+ .encrypt = ablkcipher_encrypt,
-+ .decrypt = ablkcipher_decrypt,
-+ .geniv = "eseqiv",
-+ .min_keysize = DES_KEY_SIZE,
-+ .max_keysize = DES_KEY_SIZE,
-+ .ivsize = DES_BLOCK_SIZE,
-+ }
-+ },
-+ .desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
-+ DESC_HDR_SEL0_DEU |
-+ DESC_HDR_MODE0_DEU_CBC,
-+ },
-+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
-+ .alg.crypto = {
-+ .cra_name = "cbc(des3_ede)",
-+ .cra_driver_name = "cbc-3des-talitos",
-+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
-+ CRYPTO_ALG_ASYNC,
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_ablkcipher = {
-+ .setkey = ablkcipher_setkey,
-+ .encrypt = ablkcipher_encrypt,
-+ .decrypt = ablkcipher_decrypt,
-+ .geniv = "eseqiv",
-+ .min_keysize = DES3_EDE_KEY_SIZE,
-+ .max_keysize = DES3_EDE_KEY_SIZE,
-+ .ivsize = DES3_EDE_BLOCK_SIZE,
-+ }
-+ },
-+ .desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
-+ DESC_HDR_SEL0_DEU |
-+ DESC_HDR_MODE0_DEU_CBC |
-+ DESC_HDR_MODE0_DEU_3DES,
-+ },
-+ /* AHASH algorithms. */
-+ { .type = CRYPTO_ALG_TYPE_AHASH,
-+ .alg.hash = {
-+ .init = ahash_init,
-+ .update = ahash_update,
-+ .final = ahash_final,
-+ .finup = ahash_finup,
-+ .digest = ahash_digest,
-+ .halg.digestsize = MD5_DIGEST_SIZE,
-+ .halg.base = {
-+ .cra_name = "md5",
-+ .cra_driver_name = "md5-talitos",
-+ .cra_blocksize = MD5_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_AHASH |
-+ CRYPTO_ALG_ASYNC,
-+ .cra_type = &crypto_ahash_type
-+ }
-+ },
-+ .desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
-+ DESC_HDR_SEL0_MDEU |
-+ DESC_HDR_MODE0_MDEU_MD5,
-+ },
-+ { .type = CRYPTO_ALG_TYPE_AHASH,
-+ .alg.hash = {
-+ .init = ahash_init,
-+ .update = ahash_update,
-+ .final = ahash_final,
-+ .finup = ahash_finup,
-+ .digest = ahash_digest,
-+ .halg.digestsize = SHA1_DIGEST_SIZE,
-+ .halg.base = {
-+ .cra_name = "sha1",
-+ .cra_driver_name = "sha1-talitos",
-+ .cra_blocksize = SHA1_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_AHASH |
-+ CRYPTO_ALG_ASYNC,
-+ .cra_type = &crypto_ahash_type
-+ }
-+ },
-+ .desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
-+ DESC_HDR_SEL0_MDEU |
-+ DESC_HDR_MODE0_MDEU_SHA1,
-+ },
-+};
-+
-+struct talitos_crypto_alg {
-+ struct list_head entry;
-+ struct device *dev;
-+ struct talitos_alg_template algt;
-+};
-+
-+static int talitos_cra_init(struct crypto_tfm *tfm)
-+{
-+ struct crypto_alg *alg = tfm->__crt_alg;
-+ struct talitos_crypto_alg *talitos_alg;
-+ struct talitos_ctx *ctx = crypto_tfm_ctx(tfm);
-+
-+ if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_AHASH)
-+ talitos_alg = container_of(__crypto_ahash_alg(alg),
-+ struct talitos_crypto_alg,
-+ algt.alg.hash);
-+ else
-+ talitos_alg = container_of(alg, struct talitos_crypto_alg,
-+ algt.alg.crypto);
-+
-+ /* update context with ptr to dev */
-+ ctx->dev = talitos_alg->dev;
-+
-+ /* copy descriptor header template value */
-+ ctx->desc_hdr_template = talitos_alg->algt.desc_hdr_template;
-+
-+ return 0;
-+}
-+
-+static int talitos_cra_init_ahash(struct crypto_tfm *tfm)
-+{
-+ struct talitos_ctx *ctx = crypto_tfm_ctx(tfm);
-+
-+ talitos_cra_init(tfm);
-+
-+ ctx->keylen = 0;
-+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
-+ sizeof(struct talitos_ahash_req_ctx));
-+
-+ return 0;
-+}
-+
-+/*
-+ * given the alg's descriptor header template, determine whether descriptor
-+ * type and primary/secondary execution units required match the hw
-+ * capabilities description provided in the device tree node.
-+ */
-+static int hw_supports(struct device *dev, __be32 desc_hdr_template)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ int ret;
-+
-+ ret = (DESC_TYPE(desc_hdr_template) & priv->desc_types) &&
-+ (PRIMARY_EU(desc_hdr_template) & priv->exec_units);
-+
-+ if (SECONDARY_EU(desc_hdr_template))
-+ ret = ret && (SECONDARY_EU(desc_hdr_template)
-+ & priv->exec_units);
-+
-+ return ret;
-+}
-+
-+static int talitos_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ struct talitos_crypto_alg *t_alg, *n;
-+ int i;
-+
-+ list_for_each_entry_safe(t_alg, n, &priv->alg_list, entry) {
-+ switch (t_alg->algt.type) {
-+ case CRYPTO_ALG_TYPE_ABLKCIPHER:
-+ case CRYPTO_ALG_TYPE_AEAD:
-+ crypto_unregister_alg(&t_alg->algt.alg.crypto);
-+ break;
-+ case CRYPTO_ALG_TYPE_AHASH:
-+ crypto_unregister_ahash(&t_alg->algt.alg.hash);
-+ break;
-+ }
-+ list_del(&t_alg->entry);
-+ kfree(t_alg);
-+ }
-+
-+ for (i = 0; i < priv->num_channels; i++)
-+ kfree(priv->chan[i].fifo);
-+
-+ kfree(priv->chan);
-+
-+ if (priv->irq != 0)
-+ free_irq(priv->irq, dev);
-+
-+ tasklet_kill(&priv->done_task);
-+
-+ iounmap(priv->reg);
-+
-+ dev_set_drvdata(dev, NULL);
-+
-+ kfree(priv);
-+
-+ return 0;
-+}
-+
-+static struct talitos_crypto_alg *talitos_alg_alloc(struct device *dev,
-+ struct talitos_alg_template
-+ *template)
-+{
-+ struct talitos_private *priv = dev_get_drvdata(dev);
-+ struct talitos_crypto_alg *t_alg;
-+ struct crypto_alg *alg;
-+
-+ t_alg = kzalloc(sizeof(struct talitos_crypto_alg), GFP_KERNEL);
-+ if (!t_alg)
-+ return ERR_PTR(-ENOMEM);
-+
-+ t_alg->algt = *template;
-+
-+ switch (t_alg->algt.type) {
-+ case CRYPTO_ALG_TYPE_ABLKCIPHER:
-+ alg = &t_alg->algt.alg.crypto;
-+ alg->cra_init = talitos_cra_init;
-+ break;
-+ case CRYPTO_ALG_TYPE_AHASH:
-+ alg = &t_alg->algt.alg.hash.halg.base;
-+ alg->cra_init = talitos_cra_init_ahash;
-+ if (!(priv->features & TALITOS_FTR_SHA224_HWINIT) &&
-+ !strcmp(alg->cra_name, "sha224")) {
-+ t_alg->algt.alg.hash.init = ahash_init_sha224_swinit;
-+ t_alg->algt.desc_hdr_template =
-+ DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
-+ DESC_HDR_SEL0_MDEU |
-+ DESC_HDR_MODE0_MDEU_SHA256;
-+ }
-+ break;
-+ default:
-+ dev_err(dev, "unknown algorithm type %d\n", t_alg->algt.type);
-+ return ERR_PTR(-EINVAL);
-+ }
-+
-+ alg->cra_module = THIS_MODULE;
-+ alg->cra_priority = TALITOS_CRA_PRIORITY;
-+ alg->cra_alignmask = 0;
-+ alg->cra_ctxsize = sizeof(struct talitos_ctx);
-+
-+ t_alg->dev = dev;
-+
-+ return t_alg;
-+}
-+
-+static int __devinit talitos_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct talitos_private *priv;
-+ int prop;
-+ struct resource *r;
-+ int i, err;
-+
-+ priv = kzalloc(sizeof(struct talitos_private), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ dev_set_drvdata(dev, priv);
-+
-+ priv->pdev = pdev;
-+
-+ tasklet_init(&priv->done_task, talitos_done, (unsigned long)dev);
-+
-+ INIT_LIST_HEAD(&priv->alg_list);
-+
-+ priv->irq = 64 + ISC_SEC;
-+ /* get the irq line */
-+ err = request_irq(priv->irq, talitos_interrupt, IRQF_DISABLED,
-+ dev_driver_string(dev), dev);
-+ if (err) {
-+ dev_err(dev, "failed to request irq %d\n", priv->irq);
-+ goto err_out;
-+ } else
-+ MCF_ICR(ISC_SEC) = ILP_SEC;
-+
-+
-+ /* get a pointer to the register memory */
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ priv->reg = ioremap(r->start, (r->end - r->start));
-+ if (!priv->reg)
-+ dev_err(dev, "failed to ioremap\n");
-+
-+ /* get SEC version capabilities from device tree */
-+ prop = in_be32(priv->reg + TALITOS_ID);
-+ if (prop & TALITOS_ID_SEC_1_1) {
-+ priv->num_channels = TALITOS_NCHANNELS_SEC_1_1;
-+ priv->chfifo_len = TALITOS_CHFIFOLEN_SEC_1_1;
-+ priv->exec_units = TALITOS_HAS_EUS_SEC_1_1;
-+ priv->desc_types = TALITOS_HAS_DESCTYPES_SEC_1_1;
-+ } else {
-+ dev_err(dev, "failed to id device\n");
-+ goto err_out;
-+ }
-+
-+ priv->chan = kzalloc(sizeof(struct talitos_channel) *
-+ priv->num_channels, GFP_KERNEL);
-+ if (!priv->chan) {
-+ dev_err(dev, "failed to allocate channel management space\n");
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
-+
-+ for (i = 0; i < priv->num_channels; i++) {
-+ spin_lock_init(&priv->chan[i].head_lock);
-+ spin_lock_init(&priv->chan[i].tail_lock);
-+ }
-+
-+ priv->fifo_len = roundup_pow_of_two(priv->chfifo_len);
-+
-+ for (i = 0; i < priv->num_channels; i++) {
-+ priv->chan[i].fifo = kzalloc(sizeof(struct talitos_request) *
-+ priv->fifo_len, GFP_KERNEL);
-+ if (!priv->chan[i].fifo) {
-+ dev_err(dev, "failed to allocate request fifo %d\n", i);
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
-+ }
-+
-+ for (i = 0; i < priv->num_channels; i++)
-+ atomic_set(&priv->chan[i].submit_count,
-+ -(priv->chfifo_len - 1));
-+
-+ dma_set_mask(dev, DMA_BIT_MASK(36));
-+
-+ /* reset and initialize the h/w */
-+ err = init_device(dev);
-+ if (err) {
-+ dev_err(dev, "failed to initialize device\n");
-+ goto err_out;
-+ }
-+
-+ /* register crypto algorithms the device supports */
-+ for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
-+ if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
-+ struct talitos_crypto_alg *t_alg;
-+ char *name = NULL;
-+
-+ t_alg = talitos_alg_alloc(dev, &driver_algs[i]);
-+ if (IS_ERR(t_alg)) {
-+ err = PTR_ERR(t_alg);
-+ goto err_out;
-+ }
-+
-+ switch (t_alg->algt.type) {
-+ case CRYPTO_ALG_TYPE_ABLKCIPHER:
-+ case CRYPTO_ALG_TYPE_AEAD:
-+ err = crypto_register_alg(
-+ &t_alg->algt.alg.crypto);
-+ name = t_alg->algt.alg.crypto.cra_driver_name;
-+ break;
-+ case CRYPTO_ALG_TYPE_AHASH:
-+ err = crypto_register_ahash(
-+ &t_alg->algt.alg.hash);
-+ name =
-+ t_alg->algt.alg.hash.halg.base.cra_driver_name;
-+ break;
-+ }
-+ if (err) {
-+ dev_err(dev, "%s alg registration failed\n",
-+ name);
-+ kfree(t_alg);
-+ } else {
-+ list_add_tail(&t_alg->entry, &priv->alg_list);
-+ dev_info(dev, "%s\n", name);
-+ }
-+ }
-+ }
-+
-+ return 0;
-+
-+err_out:
-+ talitos_remove(pdev);
-+
-+ return err;
-+}
-+
-+static struct platform_driver talitos_driver = {
-+ .driver = {
-+ .name = "talitos",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = talitos_probe,
-+ .remove = talitos_remove,
-+};
-+
-+static int __init talitos_init(void)
-+{
-+ return platform_driver_register(&talitos_driver);
-+}
-+module_init(talitos_init);
-+
-+static void __exit talitos_exit(void)
-+{
-+ platform_driver_unregister(&talitos_driver);
-+}
-+module_exit(talitos_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Kim Phillips <kim.phillips@freescale.com>");
-+MODULE_DESCRIPTION("Freescale integrated security engine (SEC) driver");
---- /dev/null
-+++ b/drivers/crypto/cf_talitos.h
-@@ -0,0 +1,229 @@
-+/*
-+ * Freescale Coldfire SEC (talitos) device dependent data structures
-+ *
-+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+/* device ID register values */
-+#define TALITOS_ID_SEC_1_1 (0x09000000) /* MCF547x and MCF548x */
-+
-+/*
-+ * following num_channels, channel-fifo-depth, exec-unit-mask, and
-+ * descriptor-types-mask are for forward-compatibility with openfirmware
-+ * flat device trees
-+ */
-+
-+/*
-+ * num_channels : the number of channels available in each SEC version.
-+ */
-+
-+/* n.b. this driver requires these values be a power of 2 */
-+#define TALITOS_NCHANNELS_SEC_1_1 2
-+
-+/*
-+ * channel-fifo-depth : The number of descriptor
-+ * pointers a channel fetch fifo can hold.
-+ */
-+#define TALITOS_CHFIFOLEN_SEC_1_1 1
-+
-+/* the corresponding masks for each SEC version */
-+#define TALITOS_HAS_EUS_SEC_1_1 0x7
-+
-+/* the corresponding masks for each SEC version */
-+#define TALITOS_HAS_DESCTYPES_SEC_1_1 0xf
-+
-+/*
-+ * a TALITOS_xxx_HI address points to the low data bits (32-63) of the register
-+ */
-+/* global register offset addresses */
-+/* EU Assaginment controller register is useless*/
-+#define TALITOS_EUACR 0x1000
-+#define TALITOS_EUACR_LO 0x1004
-+
-+#define TALITOS_IMR 0x1008 /* interrupt mask register */
-+#define TALITOS_IMR_ALL 0xf8000000 /* enable all interrupts mask */
-+#define TALITOS_IMR_ERR 0xa8000000 /* mask error interrupts */
-+#define TALITOS_IMR_DONE 0x50000000 /* mask done interrupts */
-+#define TALITOS_IMR_LO 0x100C /* interrupt mask register */
-+/* mask all channel interrupts mask */
-+#define TALITOS_IMR_LO_ALL 0x03333340
-+#define TALITOS_IMR_LO_ERR 0x02222240 /* mask error interrupts */
-+#define TALITOS_IMR_LO_DONE 0x01111100 /* mask done interrupts */
-+
-+#define TALITOS_ISR 0x1010 /* interrupt status register */
-+#define TALITOS_ISR_CHERR 0xa8000000 /* errors mask */
-+#define TALITOS_ISR_CHDONE 0x50000000 /* channel(s) done mask */
-+#define TALITOS_ISR_LO 0x1014 /* interrupt status register */
-+
-+#define TALITOS_ICR 0x1018 /* interrupt clear register */
-+#define TALITOS_ICR_CHERR 0xa8000000 /* errors enable */
-+#define TALITOS_ICR_CHDONE 0x50000000 /* channel(s) done enable */
-+#define TALITOS_ICR_LO 0x101C /* interrupt clear register */
-+#define TALITOS_ICR_LO_CHERR 0x02222240 /* errors enable */
-+#define TALITOS_ICR_LO_CHDONE 0x01111100 /* channel(s) done enable */
-+
-+#define TALITOS_ID 0x1020
-+
-+/* EU Assaginment status register is useless*/
-+#define TALITOS_EUASR 0x1028
-+#define TALITOS_EUASR_LO 0x102C
-+
-+#define TALITOS_MCR 0x1030 /* master control register */
-+#define TALITOS_MCR_SWR 0x01000000
-+
-+#define TALITOS_MEAR 0x1038
-+
-+/* channel register address stride */
-+#define TALITOS_CH_STRIDE 0x1000
-+
-+/* channel register offset addresses and bits */
-+#define TALITOS_CCCR(ch) (ch * TALITOS_CH_STRIDE + 0x200c)
-+#define TALITOS_CCCR_RESET 0x1 /* Channel Reset bit */
-+#define TALITOS_CCCR_CDWE 0x10 /* Channel done writeback enable bit */
-+#define TALITOS_CCCR_NE 0x8 /* Fetch Next Descriptor Enable bit */
-+#define TALITOS_CCCR_NT 0x4 /* Notification type bit */
-+#define TALITOS_CCCR_CDIE 0x2 /* Channel Done Interrupt Enable bit */
-+
-+/* Crypto-Channel Pointer Status Reg */
-+#define TALITOS_CCPSR(ch) (ch * TALITOS_CH_STRIDE + 0x2010)
-+#define TALITOS_CCPSR_LO(ch) (ch * TALITOS_CH_STRIDE + 0x2014)
-+#define TALITOS_CCPSR_LO_TEA 0x2000 /* Transfer error acknowledge */
-+#define TALITOS_CCPSR_LO_PERR 0x1000 /* Pointer not complete error */
-+#define TALITOS_CCPSR_LO_DERR 0x400 /* Descriptor error */
-+#define TALITOS_CCPSR_LO_SERR 0x200 /* Static assignment error */
-+#define TALITOS_CCPSR_LO_EUERR 0x100 /* EU error */
-+
-+/* channel fetch fifo register */
-+#define TALITOS_FF(ch) (ch * TALITOS_CH_STRIDE + 0x204c)
-+
-+/* Crypto-Channel Pointer Status Reg */
-+#define TALITOS_CDPR(ch) (ch * TALITOS_CH_STRIDE + 0x2044)
-+
-+/* Descriptor Buffer (debug) 0x2080-0x20BF*/
-+#define TALITOS_DESCBUF(ch) (ch * TALITOS_CH_STRIDE + 0x2080)
-+
-+/* execution unit register offset addresses and bits */
-+#define TALITOS_DEURCR 0xa018 /* DEU reset control register */
-+#define TALITOS_DEURCR_RESET 0x01000000 /* DEU reset bit */
-+#define TALITOS_DEUSR 0xa028 /* DEU status register */
-+#define TALITOS_DEUSR_RESET 0x01000000 /* DEU Reset status bit */
-+#define TALITOS_DEUISR 0xa030 /* DEU interrupt status register */
-+#define TALITOS_DEUIMR 0xa038 /* DEU interrupt mask register */
-+#define TALITOS_DEUIMR_MASK 0xf63f0000 /* DEU interrupt control mask*/
-+#define TALITOS_DEUIMR_KPE_MASK 0x00200000 /* DEU interrupt KPE mask*/
-+
-+#define TALITOS_AESURCR 0x12018 /* AESU reset control register */
-+#define TALITOS_AESURCR_RESET 0x01000000 /* AESU reset bit */
-+#define TALITOS_AESUSR 0x12028 /* AESU status register */
-+#define TALITOS_AESUSR_RESET 0x01000000 /* AESU Reset status bit */
-+#define TALITOS_AESUISR 0x12030 /* AESU interrupt status register */
-+#define TALITOS_AESUIMR 0x12038 /* AESU interrupt mask register */
-+#define TALITOS_AESUIMR_MASK 0xf61f0000 /* AESU interrupt control mask*/
-+
-+#define TALITOS_MDEURCR 0xc018 /* MDEU reset control register */
-+#define TALITOS_MDEURCR_RESET 0x01000000 /* MDEU reset bit */
-+#define TALITOS_MDEUSR 0xc028 /* MDEU status register */
-+#define TALITOS_MDEUSR_RESET 0x01000000 /* MDEU Reset status bit */
-+#define TALITOS_MDEUISR 0xc030 /* MDEU interrupt status register */
-+#define TALITOS_MDEUIMR 0xc038 /* MDEU interrupt mask register */
-+#define TALITOS_MDEUIMR_MASK 0xc41f0000 /* MDEU interrupt control mask*/
-+
-+#define TALITOS_AFEURCR 0x8018 /* AFEU reset control register */
-+#define TALITOS_AFEURCR_RESET 0x01000000 /* AFEU reset bit */
-+#define TALITOS_AFEUSR 0x8028 /* AFEU status register */
-+#define TALITOS_AFEUSR_RESET 0x01000000 /* AFEU Reset status bit */
-+#define TALITOS_AFEUISR 0x8030 /* AFEU interrupt status register */
-+#define TALITOS_AFEUIMR 0x8038 /* AFEU interrupt mask register */
-+#define TALITOS_AFEUIMR_MASK 0xf61f0000 /* AFEU interrupt control mask*/
-+
-+#define TALITOS_RNGRCR 0xe018 /* RNG Reset control register */
-+#define TALITOS_RNGRCR_SR 0x01000000 /* RNG RNGRCR:Software Reset */
-+#define TALITOS_RNGSR 0xe028 /* RNG status register */
-+#define TALITOS_RNGSR_RD 0x01000000 /* RNG Reset done */
-+#define TALITOS_RNGISR 0xe030 /* RNG Interrupt status register */
-+#define TALITOS_RNGIMR 0xe038 /* RNG interrupt mask register */
-+#define TALITOS_RNGIMR_MASK 0xc2100000 /* RNG interrupt control mask*/
-+
-+#define TALITOS_MDEU_CONTEXT_SIZE_MD5_SHA1_SHA256 0x28
-+#define TALITOS_MDEU_CONTEXT_SIZE_SHA384_SHA512 0x48
-+
-+/***************************RC4*******************/
-+#define ARC4_SEC_MIN_KEY_SIZE 5
-+#define ARC4_SEC_MAX_KEY_SIZE 16
-+#define ARC4_SEC_CONTEXT_LEN 259
-+#define SEC_ALG_AFEU_KEY 0x10200050
-+#define SEC_ALG_AFEU_CONTEXT 0x10700050
-+
-+/* talitos descriptor header (hdr) bits */
-+
-+/* primary execution unit select */
-+#define DESC_HDR_SEL0_MASK 0xf0000000
-+#define DESC_HDR_SEL0_AFEU 0x10000000
-+#define DESC_HDR_SEL0_DEU 0x20000000
-+#define DESC_HDR_SEL0_MDEU 0x30000000
-+#define DESC_HDR_SEL0_RNG 0x40000000
-+#define DESC_HDR_SEL0_AESU 0x60000000
-+
-+/* primary execution unit mode (MODE0) and derivatives */
-+#define DESC_HDR_MODE0_MASK 0x0ff00000
-+#define DESC_HDR_MODE0_ENCRYP 0x00100000
-+#define DESC_HDR_MODE0_AFEU_USE_KEY 0x00200000
-+#define DESC_HDR_MODE0_AFEU_USE_CONTEXT 0x00700000
-+#define DESC_HDR_MODE0_AESU_CBC 0x00200000
-+#define DESC_HDR_MODE0_AESU_ENC 0x00100000
-+#define DESC_HDR_MODE0_DEU_CBC 0x00400000
-+#define DESC_HDR_MODE0_DEU_3DES 0x00200000
-+#define DESC_HDR_MODE0_DEU_ENC 0x00100000
-+#define DESC_HDR_MODE0_MDEU_CONT 0x08000000
-+#define DESC_HDR_MODE0_MDEU_INIT 0x01000000 /* init starting regs */
-+#define DESC_HDR_MODE0_MDEU_HMAC 0x00800000
-+#define DESC_HDR_MODE0_MDEU_PAD 0x00400000 /* PD */
-+#define DESC_HDR_MODE0_MDEU_MD5 0x00200000
-+#define DESC_HDR_MODE0_MDEU_SHA256 0x00100000
-+#define DESC_HDR_MODE0_MDEU_SHA1 0x00000000 /* SHA-160 */
-+#define DESC_HDR_MODE0_MDEU_MD5_HMAC \
-+ (DESC_HDR_MODE0_MDEU_MD5 | DESC_HDR_MODE0_MDEU_HMAC)
-+#define DESC_HDR_MODE0_MDEU_SHA256_HMAC \
-+ (DESC_HDR_MODE0_MDEU_SHA256 | DESC_HDR_MODE0_MDEU_HMAC)
-+#define DESC_HDR_MODE0_MDEU_SHA1_HMAC \
-+ (DESC_HDR_MODE0_MDEU_SHA1 | DESC_HDR_MODE0_MDEU_HMAC)
-+
-+/* secondary execution unit select (SEL1) */
-+/* it's MDEU or nothing */
-+#define DESC_HDR_SEL1_MASK 0x000f0000
-+#define DESC_HDR_SEL1_MDEU 0x00030000
-+
-+/* secondary execution unit mode (MODE1) and derivatives */
-+#define DESC_HDR_MODE1_MDEU_INIT 0x00001000 /* init starting regs */
-+#define DESC_HDR_MODE1_MDEU_HMAC 0x00000800
-+#define DESC_HDR_MODE1_MDEU_PAD 0x00000400 /* PD */
-+#define DESC_HDR_MODE1_MDEU_MD5 0x00000200
-+#define DESC_HDR_MODE1_MDEU_SHA256 0x00000100
-+#define DESC_HDR_MODE1_MDEU_SHA1 0x00000000 /* SHA-160 */
-+#define DESC_HDR_MODE1_MDEU_MD5_HMAC \
-+ (DESC_HDR_MODE1_MDEU_MD5 | DESC_HDR_MODE1_MDEU_HMAC)
-+#define DESC_HDR_MODE1_MDEU_SHA256_HMAC \
-+ (DESC_HDR_MODE1_MDEU_SHA256 | DESC_HDR_MODE1_MDEU_HMAC)
-+#define DESC_HDR_MODE1_MDEU_SHA1_HMAC \
-+ (DESC_HDR_MODE1_MDEU_SHA1 | DESC_HDR_MODE1_MDEU_HMAC)
-+
-+/* direction of overall data flow (DIR) */
-+#define DESC_HDR_DIR_OUTBOUND 0x00000000
-+#define DESC_HDR_DIR_INBOUND 0x00000002
-+
-+/* done notification (DN) */
-+#define DESC_HDR_DONE 0x00000001
-+
-+/* descriptor types */
-+#define DESC_HDR_TYPE_AESU_CTR_NONSNOOP (0 << 4)
-+#define DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU (1 << 4)
-+#define DESC_HDR_TYPE_HMAC_SNOOP_NO_AFEU (2 << 4)
-+#define DESC_HDR_TYPE_NONHMAC_SNOOP_NO_AFEU (3 << 4)
-+#define DESC_HDR_TYPE_COMMON_NONSNOOP_AFEU (5 << 4)
-+
-+#define TALITOS_HDR_DONE_BITS 0xff000000
diff --git a/target/linux/coldfire/patches/025-Add-I2C-driver-for-MCF5445x-MCF547x-MCF548x.patch b/target/linux/coldfire/patches/025-Add-I2C-driver-for-MCF5445x-MCF547x-MCF548x.patch
deleted file mode 100644
index 743af7f..0000000
--- a/target/linux/coldfire/patches/025-Add-I2C-driver-for-MCF5445x-MCF547x-MCF548x.patch
+++ /dev/null
@@ -1,1216 +0,0 @@
-From a7c7130d916c1f7e0d27ad9b338912496ad53089 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:46 +0800
-Subject: [PATCH 25/52] Add I2C driver for MCF5445x/MCF547x/MCF548x.
-
-Add common I2C driver for MCF5445x/MCF547x/MCF548x and add I2C slave
-mode support for MCF5445x.
-
-Configure I2C adaptor as slave mode and Support I2C adaptor as a
-"eeprom-like" slave device.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/include/asm/mcfi2c.h | 57 +++
- drivers/i2c/busses/Kconfig | 24 ++
- drivers/i2c/busses/Makefile | 2 +
- drivers/i2c/busses/i2c-algo-mcf.h | 23 ++
- drivers/i2c/busses/i2c-mcf-slave.c | 358 ++++++++++++++++++
- drivers/i2c/busses/i2c-mcf.c | 698 ++++++++++++++++++++++++++++++++++++
- 6 files changed, 1162 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/include/asm/mcfi2c.h
- create mode 100644 drivers/i2c/busses/i2c-algo-mcf.h
- create mode 100644 drivers/i2c/busses/i2c-mcf-slave.c
- create mode 100644 drivers/i2c/busses/i2c-mcf.c
-
---- /dev/null
-+++ b/arch/m68k/include/asm/mcfi2c.h
-@@ -0,0 +1,57 @@
-+/*
-+ * mcfi2c.h -- ColdFire mcfv4/mcfv4e i2c controller support.
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+#ifndef MCF_I2C_H
-+#define MCF_I2C_H
-+
-+/* Register read/write macros */
-+#if defined(CONFIG_M547X_8X)
-+#define MCF_I2AR MCF_REG08(0x008F00) /* I2C Address */
-+#define MCF_I2FDR MCF_REG08(0x008F04) /* I2C Frequency Divider */
-+#define MCF_I2CR MCF_REG08(0x008F08) /* I2C Control */
-+#define MCF_I2SR MCF_REG08(0x008F0C) /* I2C Status */
-+#define MCF_I2DR MCF_REG08(0x008F10) /* I2C Data I/O */
-+#define MCF_I2ICR MCF_REG08(0x008F20) /* I2C Interrupt Control */
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+#define MCF_I2AR (*(volatile u8 *)(0xFC058000)) /* I2C Address */
-+/* I2C Frequency Divider */
-+#define MCF_I2FDR (*(volatile u8 *)(0xFC058004))
-+#define MCF_I2CR (*(volatile u8 *)(0xFC058008)) /* I2C Control */
-+#define MCF_I2SR (*(volatile u8 *)(0xFC05800C)) /* I2C Status */
-+#define MCF_I2DR (*(volatile u8 *)(0xFC058010)) /* I2C Data I/O */
-+#endif
-+
-+/* Bit definitions and macros for MCF_I2C_I2AR */
-+#define MCF_I2AR_ADR(x) (((x)&0x7F)<<1)
-+
-+/* Bit definitions and macros for MCF_I2C_I2FDR */
-+#define MCF_I2FDR_IC(x) (((x)&0x3F)<<0)
-+
-+/* Bit definitions and macros for MCF_I2C_I2CR */
-+#define MCF_I2CR_RSTA (0x04)
-+#define MCF_I2CR_TXAK (0x08)
-+#define MCF_I2CR_MTX (0x10)
-+#define MCF_I2CR_MSTA (0x20)
-+#define MCF_I2CR_IIEN (0x40)
-+#define MCF_I2CR_IEN (0x80)
-+
-+/* Bit definitions and macros for MCF_I2C_I2SR */
-+#define MCF_I2SR_RXAK (0x01)
-+#define MCF_I2SR_IIF (0x02)
-+#define MCF_I2SR_SRW (0x04)
-+#define MCF_I2SR_IAL (0x10)
-+#define MCF_I2SR_IBB (0x20)
-+#define MCF_I2SR_IAAS (0x40)
-+#define MCF_I2SR_ICF (0x80)
-+
-+/* Bit definitions and macros for MCF_I2C_I2ICR */
-+#if defined(CONFIG_M547X_8X)
-+#define MCF_I2ICR_IE (0x01)
-+#define MCF_I2ICR_RE (0x02)
-+#define MCF_I2ICR_TE (0x04)
-+#define MCF_I2ICR_BNBE (0x08)
-+#endif
-+
-+/********************************************************************/
-+#endif
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -431,6 +431,30 @@ config I2C_IXP2000
- This driver is deprecated and will be dropped soon. Use i2c-gpio
- instead.
-
-+config I2C_MCF
-+ tristate "MCF ColdFire I2C Interface"
-+ depends on I2C && COLDFIRE
-+ help
-+ If you say yes to this option, support will be included for the
-+ I2C on most ColdFire CPUs
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called i2c-mcf.
-+
-+config I2C_MCF_SLAVE
-+ tristate "MCF ColdFire I2C Slave Interface"
-+ depends on !(I2C_MCF)
-+ default n
-+ help
-+ mcf i2c adapter slave mode, only supported on mcf5445x platform.
-+
-+config I2C_SLAVE_TEST
-+ bool "I2C Slave Mode Test Configuration"
-+ depends on I2C_MCF_SLAVE
-+ default y
-+ help
-+ This configuration help to test I2C slave mode
-+
- config I2C_MPC
- tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
- depends on PPC32
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -77,5 +77,7 @@ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
- obj-$(CONFIG_I2C_STUB) += i2c-stub.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_MCF) += i2c-mcf.o
-+obj-$(CONFIG_I2C_MCF_SLAVE) += i2c-mcf-slave.o
-
- ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-algo-mcf.h
-@@ -0,0 +1,23 @@
-+#ifndef I2C_ALGO_MCF_H
-+#define I2C_ALGO_MCF_H 1
-+
-+/* --- Defines for pcf-adapters --------------------------------------- */
-+#include <linux/i2c.h>
-+
-+struct i2c_algo_mcf_data {
-+ void *data; /* private data for lolevel routines */
-+ void (*setmcf) (void *data, int ctl, int val);
-+ int (*getmcf) (void *data, int ctl);
-+ int (*getown) (void *data);
-+ int (*getclock) (void *data);
-+ void (*waitforpin) (void);
-+ /* local settings */
-+ int udelay;
-+ int mdelay;
-+ int timeout;
-+};
-+
-+int i2c_mcf_add_bus(struct i2c_adapter *);
-+int i2c_mcf_del_bus(struct i2c_adapter *);
-+
-+#endif /* I2C_ALGO_MCF_H */
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-mcf-slave.c
-@@ -0,0 +1,358 @@
-+/*
-+ * i2c-mcf-slave.c - support adpater slave mode, now only support
-+ * mcf5445x platform
-+ *
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Lanttor Guo <lanttor.guo@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+*/
-+
-+#ifdef CONFIG_I2C_SLAVE_TEST
-+#define DEBUG
-+#endif
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/i2c.h>
-+#include <linux/delay.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/proc_fs.h>
-+#include <linux/types.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/irq.h>
-+#include <asm/mcfi2c.h>
-+#if defined(CONFIG_M5445X)
-+#include <asm/mcf5445x_intc.h>
-+#endif
-+
-+#define IRQ (64+30)
-+#define SLAVE_HANDLER_NAME "mcf-i2c slave handler"
-+#define I2C_BUFFER_SIZE 50
-+
-+/* Structure for storing I2C transfer data */
-+struct i2c_buffer {
-+ int tx_index; /* TX index */
-+ int rx_index; /* RX index */
-+ u16 length; /* Length of the buffer in bytes */
-+ u8 buf[I2C_BUFFER_SIZE]; /* Data buffer */
-+};
-+
-+struct i2c_buffer i2c_tx_buffer;
-+struct i2c_buffer i2c_rx_buffer;
-+
-+u8 *tx_string = "abcdefghijklmnopqrstuvwxyz0123456789)!@#$%^&*([].";
-+
-+/*
-+ * I2C slave mode interrupt handler
-+ *
-+ */
-+static irqreturn_t i2c_slave_handler(int this_irq, void *dev_id)
-+{
-+ u8 dummy_read;
-+ int tmp_index;
-+
-+#ifdef DEBUG
-+ printk(KERN_INFO "i2c adapter slave mode irq handler.\n");
-+#endif
-+
-+ /* Clear I2C interupt flag */
-+ MCF_I2SR = ~MCF_I2SR_IIF;
-+
-+ /* Check if this device is in Master or Slave Mode. */
-+ if (MCF_I2CR & MCF_I2CR_MSTA) {
-+ /* Master mode, do nothing here */
-+ printk(KERN_INFO "i2c master mode at %s(), do nothing!\n",
-+ __func__);
-+ return IRQ_NONE;
-+ } else {
-+ /* Slave Mode - Check if Arbitration Lost. */
-+ if (MCF_I2SR & MCF_I2SR_IAL) {
-+
-+ #ifdef DEBUG
-+ printk(KERN_INFO "Arbitration Lost.\n");
-+ #endif
-+
-+ /* Clear IAL bit */
-+ MCF_I2SR &= ~MCF_I2SR_IAL;
-+
-+ /* Arbitration Lost -
-+ * Check if this device is being addressed as slave.
-+ *(If not, nothing more needs to be done.)
-+ */
-+ if (MCF_I2SR & MCF_I2SR_IAAS) {
-+ /* Addressed as slave -
-+ * Check if master was reading from slave or
-+ * writing to slave.
-+ */
-+ if (MCF_I2SR & MCF_I2SR_SRW) {
-+ /* Set tx_index to 0 */
-+ if (i2c_tx_buffer.length == 0) {
-+ i2c_tx_buffer.length =
-+ I2C_BUFFER_SIZE;
-+ i2c_tx_buffer.tx_index = 0;
-+ }
-+
-+ /* Master was reading from slave -
-+ * Set Transmit Mode.
-+ */
-+ MCF_I2CR |= MCF_I2CR_MTX;
-+
-+ /* Write data to MBDR. */
-+ tmp_index = i2c_tx_buffer.tx_index++;
-+ MCF_I2DR = i2c_tx_buffer.buf[tmp_index];
-+ i2c_tx_buffer.length--;
-+
-+ #ifdef DEBUG
-+ printk(KERN_INFO "Arbitration Lost: "
-+ "Addressed as slave - "
-+ "TX mode.\n");
-+ #endif
-+ } else {
-+ /* Set rx_index to 0 */
-+ i2c_rx_buffer.rx_index = 0;
-+
-+ /* Master was writing to slave -
-+ Set Receive Mode. */
-+ MCF_I2CR &= ~MCF_I2CR_MTX;
-+
-+ /* Dummy read from MBDR, to clear
-+ the ICF bit. */
-+ dummy_read = MCF_I2DR;
-+
-+ #ifdef DEBUG
-+ printk(KERN_INFO "Arbitration Lost: "
-+ "Addressed as slave - "
-+ "RX mode.\n");
-+ #endif
-+ }
-+ }
-+
-+ } else {
-+ /* Arbitration Not Lost - Check if data byte is this
-+ devices's Slave Address byte. */
-+ if (MCF_I2SR & MCF_I2SR_IAAS) {
-+ /* Data byte is Slave Address byte -
-+ Check Slave Read/Write bit. */
-+ if (MCF_I2SR & MCF_I2SR_SRW) {
-+ /* Set tx_index to 0 */
-+ if (i2c_tx_buffer.length == 0) {
-+ i2c_tx_buffer.length =
-+ I2C_BUFFER_SIZE;
-+ i2c_tx_buffer.tx_index = 0;
-+ }
-+
-+ /* Master was reading from slave -
-+ Set Transmit Mode. */
-+ MCF_I2CR |= MCF_I2CR_MTX;
-+
-+ /* Write data to MBDR. */
-+ tmp_index = i2c_tx_buffer.tx_index++;
-+ MCF_I2DR = i2c_tx_buffer.buf[tmp_index];
-+ i2c_tx_buffer.length--;
-+
-+ #ifdef DEBUG
-+ tmp_index = i2c_tx_buffer.tx_index - 1;
-+ printk(KERN_INFO "Slave TX: First byte"
-+ " - 0x%02X\n",
-+ i2c_tx_buffer.buf[tmp_index]);
-+ #endif
-+ } else {
-+ /* Master has specified Slave Receive
-+ Mode. Set Receive Mode. (Writing to
-+ MBCR clears IAAS.) */
-+
-+ /* Set rx_index to 0 */
-+ i2c_rx_buffer.rx_index = 0;
-+
-+ MCF_I2CR &= ~MCF_I2CR_MTX;
-+
-+ /* Dummy read from MBDR, to clear
-+ the ICF bit. */
-+ dummy_read = MCF_I2DR;
-+
-+ #ifdef DEBUG
-+ printk(KERN_INFO "Slave RX: Receive "
-+ "address.\n");
-+ #endif
-+ }
-+ } else {
-+ /* Data byte received is not Slave Address byte
-+ Check if this device is in Transmit or
-+ Receive Mode. */
-+ if (MCF_I2CR & MCF_I2CR_MTX) {
-+ /* Last byte received? */
-+ if (MCF_I2SR & MCF_I2SR_RXAK) {
-+ MCF_I2CR &= ~MCF_I2CR_MTX;
-+ dummy_read = MCF_I2DR;
-+
-+ #ifdef DEBUG
-+ printk(KERN_INFO "Slave TX: "
-+ "Last byte has been "
-+ "sent.\n");
-+ #endif
-+ } else {
-+ /* Write data to MBDR. */
-+ tmp_index =
-+ i2c_tx_buffer.tx_index++;
-+ MCF_I2DR =
-+ i2c_tx_buffer.buf[tmp_index];
-+ i2c_tx_buffer.length--;
-+
-+ if (i2c_tx_buffer.length == 0) {
-+ i2c_tx_buffer.length =
-+ I2C_BUFFER_SIZE;
-+ i2c_tx_buffer.tx_index =
-+ 0;
-+ }
-+
-+ }
-+ } else {
-+ /* Receive Mode - Read data from
-+ MBDR and store it. */
-+ tmp_index = i2c_rx_buffer.rx_index++;
-+ i2c_rx_buffer.buf[tmp_index] = MCF_I2DR;
-+ i2c_rx_buffer.length++;
-+ }
-+ }
-+ }
-+ return IRQ_HANDLED;
-+ }
-+}
-+
-+#ifdef CONFIG_PROC_FS
-+
-+/*
-+ * Info exported via "/proc/driver/i2c".
-+ */
-+
-+static int gen_i2c_proc_output(char *buf)
-+{
-+ char *p;
-+
-+ p = buf;
-+ p += sprintf(p,
-+ "I2CR: 0x%x\n"
-+ "I2SR: 0x%x\n"
-+ "I2DR: 0x%x\n",
-+ MCF_I2CR, MCF_I2SR, MCF_I2DR);
-+
-+ return p - buf;
-+}
-+
-+static int gen_i2c_read_proc(char *page, char **start, off_t off,
-+ int count, int *eof, void *data)
-+{
-+ int len = gen_i2c_proc_output(page);
-+ if (len <= off+count)
-+ *eof = 1;
-+ *start = page + off;
-+ len -= off;
-+ if (len > count)
-+ len = count;
-+ if (len < 0)
-+ len = 0;
-+ return len;
-+}
-+
-+static int __init gen_i2c_proc_init(void)
-+{
-+ struct proc_dir_entry *r;
-+
-+ r = create_proc_read_entry("driver/i2c-adaptor-register", 0, NULL,
-+ gen_i2c_read_proc, NULL);
-+ if (!r)
-+ return -ENOMEM;
-+ return 0;
-+}
-+#else
-+static inline int gen_i2c_proc_init(void) { return 0; }
-+#endif /* CONFIG_PROC_FS */
-+
-+/*
-+ * Initalize I2C module
-+ */
-+static int __init i2c_coldfire_init(void)
-+{
-+ int retval;
-+ u8 dummy_read;
-+
-+#ifdef DEBUG
-+ printk(KERN_INFO "init i2c adaptor slave mode!\n");
-+#endif
-+
-+ /* Initialize the tx buffer */
-+ strcpy((char *)&i2c_tx_buffer.buf, (const char *)tx_string);
-+ i2c_tx_buffer.length = I2C_BUFFER_SIZE;
-+
-+#if defined(CONFIG_M5445X)
-+ /*
-+ * Initialize the GPIOs for I2C
-+ */
-+ MCF_GPIO_PAR_FECI2C |= (0
-+ | MCF_GPIO_PAR_FECI2C_PAR_SDA(3)
-+ | MCF_GPIO_PAR_FECI2C_PAR_SCL(3));
-+#endif
-+
-+ /* Set transmission frequency 0x19 = ~100kHz */
-+ MCF_I2FDR = 0x19;
-+
-+ /* set the I2C slave address */
-+ MCF_I2AR = 0x6A;
-+
-+ /* Enable I2C module and if IBB is set, do the special initialzation */
-+ /* procedures as are documented */
-+
-+ if ((MCF_I2SR & MCF_I2SR_IBB) == 1) {
-+ printk(KERN_INFO "%s - do special I2C init procedures\n",
-+ __func__);
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0xA0;
-+ dummy_read = MCF_I2DR;
-+ MCF_I2SR = 0x00;
-+ MCF_I2CR = 0x00;
-+ }
-+
-+ MCF_I2CR |= (MCF_I2CR_IEN | MCF_I2CR_IIEN);
-+
-+ /* default I2C mode is - slave and receive */
-+ MCF_I2CR &= ~(MCF_I2CR_MSTA | MCF_I2CR_MTX);
-+
-+ retval = request_irq(IRQ, i2c_slave_handler, IRQF_DISABLED,
-+ SLAVE_HANDLER_NAME, NULL);
-+ if (retval < 0)
-+ printk(KERN_INFO "request_irq for i2c slave mode failed!\n");
-+
-+ retval = gen_i2c_proc_init();
-+
-+ if (retval < 0)
-+ printk(KERN_INFO "gen /proc/i2c-adaptor-register for i2c slave mode failed!\n");
-+
-+ return retval;
-+};
-+
-+/*
-+ * I2C module exit function
-+ */
-+
-+static void __exit i2c_coldfire_exit(void)
-+{
-+ /* disable I2C and Interrupt */
-+ MCF_I2CR &= ~(MCF_I2CR_IEN | MCF_I2CR_IIEN);
-+ free_irq(IRQ, NULL);
-+
-+};
-+
-+MODULE_DESCRIPTION("MCF5445x I2C adaptor slave mode support");
-+MODULE_LICENSE("GPL");
-+
-+module_init(i2c_coldfire_init);
-+module_exit(i2c_coldfire_exit);
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-mcf.c
-@@ -0,0 +1,698 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Lanttor.Guo@freescale.com
-+ *
-+ * I2C bus driver on mcfv4/mcfv4e platform
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#include <linux/i2c.h>
-+#include "i2c-algo-mcf.h"
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/proc_fs.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfi2c.h>
-+
-+#if defined(CONFIG_M547X_8X)
-+#include <asm/m5485sim.h>
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+#include <asm/mcfsim.h>
-+#endif
-+
-+#define get_clock(adap) (clock)
-+#define get_own(adap) (own)
-+
-+#if defined(CONFIG_M547X_8X)
-+static int clock = 0x3b;
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+static int clock = 0x19;
-+#endif
-+module_param(clock, int, 0);
-+MODULE_PARM_DESC(clock,
-+ "Set I2C clock in kHz: 400=fast mode (default == 100khz)");
-+
-+static int own = 0x78;
-+module_param(own, int, 0);
-+MODULE_PARM_DESC(clock, "Set I2C Master controller address");
-+
-+static struct i2c_algo_mcf_data i2c_mcf_board_data = {
-+ .timeout = 10000,
-+};
-+
-+static struct i2c_adapter i2c_mcf_board_adapter = {
-+ .owner = THIS_MODULE,
-+ .name = "mcf i2c adapter",
-+ .algo_data = &i2c_mcf_board_data,
-+ .class = I2C_CLASS_HWMON,
-+ .timeout = 100,
-+ .retries = 2
-+};
-+/*
-+ * static void i2c_start()
-+ *
-+ * Generates START signal
-+ */
-+static void
-+i2c_start(
-+ struct i2c_algo_mcf_data *adap
-+) {
-+ MCF_I2CR |= MCF_I2CR_MSTA;
-+}
-+
-+
-+/*
-+ * static void i2c_stop()
-+ *
-+ * Generates STOP signal
-+ */
-+static void
-+i2c_stop(
-+ struct i2c_algo_mcf_data *adap
-+) {
-+ MCF_I2CR &= ~MCF_I2CR_MSTA;
-+}
-+
-+static int
-+i2c_getack(
-+ struct i2c_algo_mcf_data *adap
-+) {
-+ return !(MCF_I2SR & MCF_I2SR_RXAK);
-+}
-+
-+/*
-+ * static void wait_for_bb()
-+ *
-+ * Wait for bus idle state
-+ */
-+static int
-+wait_for_bb(
-+ struct i2c_algo_mcf_data *adap
-+) {
-+ int i;
-+ for (i = 0; i < adap->timeout; i++) {
-+ if (!(MCF_I2SR & MCF_I2SR_IBB))
-+ return 0;
-+ udelay(100);
-+ }
-+ printk(KERN_ERR "%s: timeout", __func__);
-+ return -ETIMEDOUT;
-+}
-+
-+/*
-+ * static void wait_for_not_bb()
-+ *
-+ * Wait for bus busy state
-+ */
-+static int
-+wait_for_not_bb(
-+ struct i2c_algo_mcf_data *adap
-+) {
-+ int i;
-+ for (i = 0; i < adap->timeout; i++) {
-+ if (MCF_I2SR & MCF_I2SR_IBB)
-+ return 0;
-+ udelay(100);
-+ }
-+ printk(KERN_ERR "%s: timeout", __func__);
-+ return -ETIMEDOUT;
-+}
-+
-+/*
-+ * static void wait_xfer_done()
-+ *
-+ * Wait for transfer to complete
-+ */
-+static int
-+wait_xfer_done(
-+ struct i2c_algo_mcf_data *adap
-+) {
-+ int i;
-+
-+ for (i = 0; i < adap->timeout; i++) {
-+ if (MCF_I2SR & MCF_I2SR_IIF) {
-+ MCF_I2SR &= ~MCF_I2SR_IIF;
-+ return 0;
-+ }
-+ udelay(10);
-+ }
-+ printk(KERN_ERR "%s: timeout", __func__);
-+ return -ETIMEDOUT;
-+}
-+
-+
-+/*
-+ * static void i2c_set_addr()
-+ *
-+ * Sets slave address to communicate
-+ */
-+static int
-+i2c_set_addr(
-+ struct i2c_algo_mcf_data *adap,
-+ struct i2c_msg *msg,
-+ int retries
-+) {
-+ unsigned short flags = msg->flags;
-+ unsigned char addr;
-+ MCF_I2CR |= MCF_I2CR_MTX;
-+ if ((flags & I2C_M_TEN)) {
-+ /* 10 bit address not supported yet */
-+ return -EIO;
-+ } else {
-+ /* normal 7bit address */
-+ addr = (msg->addr << 1);
-+ if (flags & I2C_M_RD)
-+ addr |= 1;
-+ if (flags & I2C_M_REV_DIR_ADDR)
-+ addr ^= 1;
-+
-+ MCF_I2DR = addr;
-+ }
-+ return 0;
-+}
-+
-+
-+/*
-+ * static void mcf_i2c_init()
-+ *
-+ * Perform ColdFire i2c initialization
-+ */
-+static void
-+mcf_i2c_init(struct i2c_algo_mcf_data *adap)
-+{
-+ u8 dummy;
-+
-+ /* Setup GPIO lines */
-+#if defined(CONFIG_M547X_8X)
-+ MCF_PAR_FECI2CIRQ |= MCF_PAR_SDA;
-+ MCF_PAR_FECI2CIRQ |= MCF_PAR_SCL;
-+#elif defined(CONFIG_M5445X)
-+ MCF_GPIO_PAR_FECI2C |= (0
-+ | MCF_GPIO_PAR_FECI2C_PAR_SDA(3)
-+ | MCF_GPIO_PAR_FECI2C_PAR_SCL(3));
-+#elif defined(CONFIG_M5441X)
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_I2C0SCL_MASK) |
-+ MCF_GPIO_PAR_CANI2C_I2C0SCL_I2C0SCL;
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_I2C0SDA_MASK) |
-+ MCF_GPIO_PAR_CANI2C_I2C0SDA_I2C0SDA;
-+#endif
-+
-+ /* Ensure slaves are in idle state */
-+ if (MCF_I2SR & MCF_I2SR_IBB) {
-+#if defined(CONFIG_M547X_8X)
-+ MCF_I2ICR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0x0A;
-+ dummy = MCF_I2DR;
-+ MCF_I2SR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2ICR = 0x01;
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0xA0;
-+ dummy = MCF_I2DR;
-+ MCF_I2SR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0x80;
-+#endif
-+ }
-+
-+ /* setup SCL clock */
-+ MCF_I2FDR = get_clock(adap);
-+
-+ /* set slave address */
-+ MCF_I2AR = get_own(adap);
-+
-+ /* enable I2C module */
-+#if defined(CONFIG_M5441X)
-+ MCF_I2CR = (MCF_I2CR_IEN | MCF_I2CR_IIEN);
-+#else
-+ MCF_I2CR = MCF_I2CR_IEN;
-+#endif
-+}
-+
-+static int i2c_outb(
-+ struct i2c_adapter *i2c_adap,
-+ char c
-+) {
-+
-+ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
-+ int timeout;
-+ /* Put data to be sent */
-+ MCF_I2DR = c;
-+ /* Wait for xfer completed*/
-+ timeout = wait_xfer_done(adap);
-+ if (timeout) {
-+ i2c_stop(adap);
-+ wait_for_bb(adap);
-+ printk(KERN_ERR "i2c-algo-mcf: %s i2c_write: "
-+ "error - timeout.\n", i2c_adap->name);
-+ return -EREMOTEIO; /* got a better one ?? */
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * static void mcf_sendbytes()
-+ *
-+ * Perform tx data transfer
-+ */
-+static int
-+mcf_sendbytes(
-+ struct i2c_adapter *i2c_adap,
-+ const char *buf,
-+ int count, int last
-+) {
-+ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
-+ int ret, i;
-+
-+ /* Set master TX mode */
-+ MCF_I2CR |= MCF_I2CR_MTX;
-+
-+ for (i = 0; i < count; ++i) {
-+ printk(KERN_DEBUG "i2c-algo-mcf: %s i2c_write: writing %2.2X\n",
-+ i2c_adap->name, buf[i]&0xff);
-+ ret = i2c_outb(i2c_adap, buf[i]);
-+ if (ret < 0)
-+ return ret;
-+ }
-+ if (last) {
-+ i2c_stop(adap);
-+ wait_for_bb(adap);
-+ } else {
-+ /* i2c_repstart(adap);*/
-+ }
-+
-+ return i;
-+}
-+
-+
-+/*
-+ * static void mcf_readbytes()
-+ *
-+ * Perform rx data transfer
-+ */
-+static int
-+mcf_readbytes(
-+ struct i2c_adapter *i2c_adap,
-+ char *buf,
-+ int count, int last
-+) {
-+ int i;
-+ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
-+ u8 dummy;
-+
-+ /* Set master RX mode */
-+ MCF_I2CR &= ~MCF_I2CR_MTX;
-+ MCF_I2CR &= ~MCF_I2CR_TXAK;
-+ dummy = MCF_I2DR;
-+
-+ for (i = 0; i < count-1; i++) {
-+ if (wait_xfer_done(adap)) {
-+ i2c_stop(adap);
-+ wait_for_bb(adap);
-+ printk(KERN_DEBUG
-+ "i2c-algo-mcf: mcf_readbytes timed out.\n");
-+ return -1;
-+ }
-+
-+ /* store next data byte */
-+ buf[i] = MCF_I2DR;
-+ }
-+
-+ if (wait_xfer_done(adap)) {
-+ i2c_stop(adap);
-+ wait_for_bb(adap);
-+ printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n");
-+ return -1;
-+ }
-+
-+ /* Disable acknowlege (set I2CR.TXAK) */
-+ MCF_I2CR |= MCF_I2CR_TXAK;
-+ buf[i] = MCF_I2DR;
-+ if (wait_xfer_done(adap)) {
-+ i2c_stop(adap);
-+ wait_for_bb(adap);
-+ printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n");
-+ return -1;
-+ }
-+
-+ if (last) {
-+ i2c_stop(adap);
-+ wait_for_bb(adap);
-+ } else {
-+ /* i2c_repstart(adap);*/
-+ }
-+
-+ return i+1;
-+}
-+
-+
-+/*
-+ * static void mcf_xfer()
-+ *
-+ * Perform master data I/O transfer
-+ */
-+static int
-+mcf_xfer(
-+ struct i2c_adapter *i2c_adap,
-+ struct i2c_msg *msgs,
-+ int num)
-+{
-+ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
-+ struct i2c_msg *pmsg;
-+ int i;
-+ int ret = 0, timeout;
-+
-+ /* Skip own address */
-+ if (get_own(adap) == (msgs[0].addr << 1))
-+ return -EIO;
-+
-+ /* Ensure slaves are in idle state */
-+ if (MCF_I2SR & MCF_I2SR_IBB) {
-+#if defined(CONFIG_M547X_8X)
-+ MCF_I2ICR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0x0A;
-+ timeout = MCF_I2DR;
-+ MCF_I2SR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2ICR = 0x01;
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0xA0;
-+ timeout = MCF_I2DR;
-+ MCF_I2SR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0x80;
-+#endif
-+ }
-+
-+ /* setup SCL clock */
-+ MCF_I2FDR = get_clock(adap);
-+ /* set slave address */
-+ MCF_I2AR = get_own(adap);
-+ /* enable I2C module */
-+#if defined(CONFIG_M5441X)
-+ MCF_I2CR = (MCF_I2CR_IEN | MCF_I2CR_IIEN);
-+#else
-+ MCF_I2CR = MCF_I2CR_IEN;
-+#endif
-+ MCF_I2CR |= MCF_I2CR_TXAK;
-+
-+ /* Check for bus busy */
-+ wait_for_bb(adap);
-+
-+ for (i = 0; ret >= 0 && i < num; i++) {
-+ if (MCF_I2SR & MCF_I2SR_IBB) {
-+#if defined(CONFIG_M547X_8X)
-+ MCF_I2ICR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0x0A;
-+ timeout = MCF_I2DR;
-+ MCF_I2SR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2ICR = 0x01;
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0xA0;
-+ timeout = MCF_I2DR;
-+ MCF_I2SR = 0x00;
-+ MCF_I2CR = 0x00;
-+ MCF_I2CR = 0x80;
-+#endif
-+ }
-+ /* setup SCL clock */
-+ MCF_I2FDR = get_clock(adap);
-+ /* set slave address */
-+ MCF_I2AR = get_own(adap);
-+ /* enable I2C module */
-+#if defined(CONFIG_M5441X)
-+ MCF_I2CR = (MCF_I2CR_IEN | MCF_I2CR_IIEN);
-+#else
-+ MCF_I2CR = MCF_I2CR_IEN;
-+#endif
-+ MCF_I2CR |= MCF_I2CR_TXAK;
-+
-+ /* Check for bus busy */
-+ wait_for_bb(adap);
-+
-+ pmsg = &msgs[i];
-+
-+ printk(KERN_DEBUG "i2c-algo-mcf: Doing %s %d bytes "
-+ "to 0x%02x - %d of %d messages\n",
-+ pmsg->flags & I2C_M_RD ? "read" : "write",
-+ pmsg->len, pmsg->addr, i + 1, num);
-+
-+ /* Send START */
-+ /*if (i == 0)*/
-+ i2c_start(adap);
-+
-+ /* Wait for Bus Busy */
-+ wait_for_not_bb(adap);
-+
-+ MCF_I2CR |= MCF_I2CR_MTX;
-+
-+ ret = i2c_set_addr(adap, pmsg, i2c_adap->retries);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* Wait for address transfer completion */
-+ wait_xfer_done(adap);
-+
-+ /* Check for ACK */
-+ if (!i2c_getack(adap)) {
-+ i2c_stop(adap);
-+ wait_for_bb(adap);
-+ printk(KERN_DEBUG "i2c-algo-mcf: No ack after "
-+ "send address in mcf_xfer\n");
-+ return -EREMOTEIO;
-+ }
-+
-+ printk(KERN_DEBUG "i2c-algo-mcf: Msg %d, "
-+ "addr = 0x%x, flags = 0x%x, len = %d\n",
-+ i, msgs[i].addr, msgs[i].flags, msgs[i].len);
-+ /* Read */
-+ if (pmsg->flags & I2C_M_RD) {
-+ /* read bytes into buffer*/
-+ ret = mcf_readbytes(i2c_adap, pmsg->buf, pmsg->len,
-+ (i + 1 == num));
-+
-+ if (ret != pmsg->len) {
-+ printk(KERN_DEBUG "i2c-algo-mcf: fail: "
-+ "only read %d bytes.\n", ret);
-+ } else {
-+ printk(KERN_DEBUG "i2c-algo-mcf: "
-+ "read %d bytes.\n", ret);
-+ }
-+ } else {
-+ /* write bytes into buffer*/
-+ ret = mcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
-+ (i + 1 == num));
-+ if (ret != pmsg->len) {
-+ printk(KERN_DEBUG "i2c-algo-mcf: fail: "
-+ "only wrote %d bytes.\n", ret);
-+ } else {
-+ printk(KERN_DEBUG "i2c-algo-mcf: wrote"
-+ "%d bytes.\n", ret);
-+ }
-+ }
-+ MCF_I2CR = 0;
-+ }
-+
-+ /* Disable I2C module */
-+ MCF_I2CR = 0;
-+ return i;
-+}
-+
-+
-+/*
-+ * static void mcf_func()
-+ *
-+ * Return algorithm funtionality
-+ */
-+static u32
-+mcf_func(
-+ struct i2c_adapter *i2c_adap
-+) {
-+ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
-+}
-+
-+/*
-+ * ColdFire bus algorithm callbacks
-+ */
-+static struct i2c_algorithm mcf_algo = {
-+ .master_xfer = mcf_xfer,
-+ .functionality = mcf_func,
-+};
-+
-+/***********************************************************/
-+struct coldfire_i2c {
-+ void __iomem *base;
-+ struct resource *irqarea;
-+ struct resource *ioarea;
-+ u32 irq;
-+ struct i2c_adapter *adap;
-+ u32 flags;
-+};
-+
-+/*
-+ * registering functions to load algorithms at runtime
-+ */
-+int i2c_mcf_add_bus(struct i2c_adapter *adap)
-+{
-+ struct i2c_algo_mcf_data *mcf_adap = adap->algo_data;
-+
-+ /*adap->id |= mcf_algo.id;*/
-+ adap->algo = &mcf_algo;
-+ adap->timeout = 100;
-+
-+ mcf_i2c_init(mcf_adap);
-+
-+ i2c_add_numbered_adapter(adap);
-+
-+ return 0;
-+}
-+
-+static int mcf_i2c_probe(struct platform_device *pdev)
-+{
-+ struct coldfire_i2c *i2c;
-+ int rc = 0;
-+
-+ /************************************************************/
-+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
-+ if (!i2c) {
-+ printk(KERN_ERR "%s kzalloc coldfire_i2c faile\n",
-+ __func__);
-+ return -ENOMEM;
-+ }
-+ /****************************************************************/
-+ platform_set_drvdata(pdev, i2c);
-+
-+ i2c->adap = &i2c_mcf_board_adapter;
-+ i2c->adap->dev.parent = &pdev->dev;
-+ i2c->adap->nr = pdev->id;
-+ rc = i2c_mcf_add_bus(i2c->adap);
-+ if (rc < 0) {
-+ printk(KERN_ERR "%s - failed to add adapter\n", __func__);
-+ rc = -ENODEV;
-+ goto fail_add;
-+ }
-+
-+ printk(KERN_INFO "i2c-algo-mcf.o: I2C ColdFire algorithm"
-+ " module is loaded.\n");
-+ return rc;
-+
-+fail_add:
-+ kfree(i2c);
-+ return rc;
-+};
-+
-+static int mcf_i2c_remove(struct platform_device *pdev)
-+{
-+ struct coldfire_i2c *i2c = platform_get_drvdata(pdev);
-+
-+ i2c_del_adapter(i2c->adap);
-+ platform_set_drvdata(pdev, NULL);
-+ iounmap(i2c->base);
-+ kfree(i2c);
-+ return 0;
-+};
-+
-+/* Structure for a device driver */
-+static struct platform_driver mcf_i2c_driver = {
-+ .probe = mcf_i2c_probe,
-+ .remove = mcf_i2c_remove,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "mcf-i2c",
-+ },
-+};
-+
-+#ifdef CONFIG_PROC_FS
-+
-+/*
-+ * Info exported via "/proc/driver/i2c".
-+ */
-+
-+static int gen_i2c_proc_output(char *buf)
-+{
-+ char *p;
-+
-+ p = buf;
-+ p += sprintf(p,
-+ "I2CR: 0x%x\n"
-+ "I2SR: 0x%x\n"
-+ "I2DR: 0x%x\n",
-+ MCF_I2CR, MCF_I2SR, MCF_I2DR);
-+
-+ return p - buf;
-+}
-+
-+static int gen_i2c_read_proc(char *page, char **start, off_t off,
-+ int count, int *eof, void *data)
-+{
-+ int len = gen_i2c_proc_output(page);
-+ if (len <= off+count)
-+ *eof = 1;
-+ *start = page + off;
-+ len -= off;
-+ if (len > count)
-+ len = count;
-+ if (len < 0)
-+ len = 0;
-+ return len;
-+}
-+
-+static int __init gen_i2c_proc_init(void)
-+{
-+ struct proc_dir_entry *r;
-+
-+ r = create_proc_read_entry("driver/i2c-adaptor-register", 0, NULL,
-+ gen_i2c_read_proc, NULL);
-+ if (!r)
-+ return -ENOMEM;
-+ return 0;
-+}
-+#else
-+static inline int gen_i2c_proc_init(void) { return 0; }
-+#endif /* CONFIG_PROC_FS */
-+
-+static int __init coldfire_i2c_init(void)
-+{
-+ int retval;
-+
-+ retval = gen_i2c_proc_init();
-+ if (retval < 0)
-+ printk(KERN_INFO "generate /proc/i2c-adaptor-register "
-+ "for i2c master mode failed!\n");
-+
-+ return platform_driver_register(&mcf_i2c_driver);
-+}
-+
-+static void __exit coldfire_i2c_exit(void)
-+{
-+ platform_driver_unregister(&mcf_i2c_driver);
-+}
-+
-+module_init(coldfire_i2c_init);
-+module_exit(coldfire_i2c_exit);
-+
-+MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
-+MODULE_DESCRIPTION("I2C-Bus adapter for MCFV4/MCFV4E processors");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/coldfire/patches/026-Add-RTC-driver-support-for-MCF5445x.patch b/target/linux/coldfire/patches/026-Add-RTC-driver-support-for-MCF5445x.patch
deleted file mode 100644
index 25b9794..0000000
--- a/target/linux/coldfire/patches/026-Add-RTC-driver-support-for-MCF5445x.patch
+++ /dev/null
@@ -1,627 +0,0 @@
-From 40563ab5aa698191dbd8a05fe6053aa790eee2a1 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:46 +0800
-Subject: [PATCH 26/52] Add RTC driver support for MCF5445x
-
-On-chip RTC module support for MCF54451 and MCF54455.
-Using internal 32K clock to drive the rtc module.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/rtc/Kconfig | 9 +
- drivers/rtc/Makefile | 1 +
- drivers/rtc/rtc-mcf.c | 583 +++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 593 insertions(+), 0 deletions(-)
- create mode 100644 drivers/rtc/rtc-mcf.c
-
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -919,6 +919,15 @@ config RTC_DRV_MV
- This driver can also be built as a module. If so, the module
- will be called rtc-mv.
-
-+config RTC_MCF
-+ tristate "Freescale Coldfire Real Time Clock"
-+ depends on COLDFIRE
-+ help
-+ If you say yes here you will get support for the on-chip Coldfire
-+ Real-Time Clock.
-+
-+ If you build it as a module it will be call mcf-rtc.
-+
- config RTC_DRV_PS3
- tristate "PS3 RTC"
- depends on PPC_PS3
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -102,3 +102,4 @@ obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41
- obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm831x.o
- obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o
- obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
-+obj-$(CONFIG_RTC_MCF) += rtc-mcf.o
---- /dev/null
-+++ b/drivers/rtc/rtc-mcf.c
-@@ -0,0 +1,583 @@
-+/*
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Implementation based on rtc-mxc.c
-+ * This file contains Real Time Clock interface for Linux.
-+ *
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/rtc.h>
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/uaccess.h>
-+#include <asm/mcfsim.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+
-+#ifdef readl
-+#undef readl
-+#endif
-+
-+#ifdef writel
-+#undef writel
-+#endif
-+
-+#define readl(addr) in_be32(addr)
-+#define writel(val, addr) out_be32((addr), (val))
-+
-+#define RTC_INPUT_CLK_32768HZ 0x8000
-+#define RTC_INPUT_CLK_32000HZ 0x7D00
-+#define RTC_INPUT_CLK_38400HZ 0x9600
-+#define RTC_INPUT_CLK_48000HZ 0xBB80
-+
-+#define PIT_ALL_ON (MCF_RTC_ISR_2HZ | MCF_RTC_ISR_SAM0 | MCF_RTC_ISR_SAM1 | \
-+ MCF_RTC_ISR_SAM2 | MCF_RTC_ISR_SAM3 | MCF_RTC_ISR_SAM4 | \
-+ MCF_RTC_ISR_SAM5 | MCF_RTC_ISR_SAM6 | MCF_RTC_ISR_SAM7)
-+
-+#define MAX_PIE_NUM 9
-+#define MAX_PIE_FREQ 512
-+const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = {
-+ {2, MCF_RTC_ISR_2HZ},
-+ {4, MCF_RTC_ISR_SAM0},
-+ {8, MCF_RTC_ISR_SAM1},
-+ {16, MCF_RTC_ISR_SAM2},
-+ {32, MCF_RTC_ISR_SAM3},
-+ {64, MCF_RTC_ISR_SAM4},
-+ {128, MCF_RTC_ISR_SAM5},
-+ {256, MCF_RTC_ISR_SAM6},
-+ {MAX_PIE_FREQ, MCF_RTC_ISR_SAM7},
-+};
-+
-+/* Those are the bits from a classic RTC we want to mimic */
-+#define RTC_IRQF 0x80 /* any of the following 3 is active */
-+#define RTC_PF 0x40 /* Periodic interrupt */
-+#define RTC_AF 0x20 /* Alarm interrupt */
-+#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */
-+
-+#define MCF_RTC_TIME 0
-+#define MCF_RTC_ALARM 1
-+
-+struct rtc_plat_data {
-+ struct rtc_device *rtc;
-+ int irq;
-+ unsigned int irqen;
-+ int alrm_sec;
-+ int alrm_min;
-+ int alrm_hour;
-+ int alrm_mday;
-+};
-+
-+/*!
-+ * @defgroup RTC Real Time Clock (RTC) Driver
-+ */
-+/*!
-+ * @file rtc-mcf.c
-+ * @brief Real Time Clock interface
-+ *
-+ * This file contains Real Time Clock interface for Linux.
-+ *
-+ * @ingroup RTC
-+ */
-+
-+#define RTC_VERSION "0.1"
-+
-+static u32 rtc_freq = 2; /* minimun value for PIE */
-+static unsigned long rtc_status;
-+
-+static struct rtc_time g_rtc_alarm = {
-+ .tm_year = 0,
-+ .tm_mon = 0,
-+ .tm_mday = 0,
-+ .tm_hour = 0,
-+ .tm_mon = 0,
-+ .tm_sec = 0,
-+};
-+
-+static DEFINE_SPINLOCK(rtc_lock);
-+
-+/*!
-+ * This function is used to obtain the RTC time or the alarm value in
-+ * second.
-+ *
-+ * @param time_alarm use MCF_RTC_TIME for RTC time value;
-+ * MCF_RTC_ALARM for alarm value
-+ *
-+ * @return The RTC time or alarm time in second.
-+ */
-+static u32 get_alarm_or_time(struct device *dev, int time_alarm)
-+{
-+ u32 day, hr, min, sec, hr_min;
-+
-+ if (time_alarm == MCF_RTC_TIME) {
-+ day = MCF_RTC_DAYS_DAYS(readl(MCF_RTC_DAYS));
-+ hr_min = readl(MCF_RTC_HOURMIN);
-+ sec = MCF_RTC_SECONDS_SECONDS(readl(MCF_RTC_SECONDS));
-+ } else if (time_alarm == MCF_RTC_ALARM) {
-+ day = MCF_RTC_ALRM_DAY_DAYS(readl(MCF_RTC_ALRM_DAY));
-+ hr_min = readl(MCF_RTC_ALRM_HM);
-+ sec = MCF_RTC_ALRM_SEC_SECONDS(readl(MCF_RTC_ALRM_SEC));
-+ } else {
-+ panic("wrong value for time_alarm=%d\n", time_alarm);
-+ }
-+
-+ hr = (hr_min >> 8) & 0x001F;
-+ min = hr_min & 0x003F;
-+
-+ return (((day * 24 + hr) * 60) + min) * 60 + sec;
-+}
-+
-+/*!
-+ * This function sets the RTC alarm value or the time value.
-+ *
-+ * @param time_alarm the new alarm value to be updated in the RTC
-+ * @param time use MCF_RTC_TIME for RTC time value;
-+ * MCF_RTC_ALARM for alarm value
-+ */
-+static void set_alarm_or_time(struct device *dev, int time_alarm, u32 time)
-+{
-+ u32 day, hr, min, sec, temp;
-+
-+ day = time / 86400;
-+ time -= day * 86400;
-+ /* time is within a day now */
-+ hr = time / 3600;
-+ time -= hr * 3600;
-+ /* time is within an hour now */
-+ min = time / 60;
-+ sec = time - min * 60;
-+
-+ temp = (hr << 8) + min;
-+
-+ if (time_alarm == MCF_RTC_TIME) {
-+ writel(day, MCF_RTC_DAYS);
-+ writel(sec, MCF_RTC_SECONDS);
-+ writel(temp, MCF_RTC_HOURMIN);
-+ } else if (time_alarm == MCF_RTC_ALARM) {
-+ writel(day, MCF_RTC_ALRM_DAY);
-+ writel(sec, MCF_RTC_ALRM_SEC);
-+ writel(temp, MCF_RTC_ALRM_HM);
-+ } else {
-+ panic("wrong value for time_alarm=%d\n", time_alarm);
-+ }
-+}
-+
-+/*!
-+ * This function updates the RTC alarm registers and then clears all the
-+ * interrupt status bits.
-+ *
-+ * @param alrm the new alarm value to be updated in the RTC
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
-+{
-+ struct rtc_time alarm_tm, now_tm;
-+ unsigned long now, time;
-+ int ret;
-+
-+ now = get_alarm_or_time(dev, MCF_RTC_TIME);
-+ rtc_time_to_tm(now, &now_tm);
-+ alarm_tm.tm_year = now_tm.tm_year;
-+ alarm_tm.tm_mon = now_tm.tm_mon;
-+ alarm_tm.tm_mday = now_tm.tm_mday;
-+ alarm_tm.tm_hour = alrm->tm_hour;
-+ alarm_tm.tm_min = alrm->tm_min;
-+ alarm_tm.tm_sec = alrm->tm_sec;
-+ rtc_tm_to_time(&now_tm, &now);
-+ rtc_tm_to_time(&alarm_tm, &time);
-+ if (time < now) {
-+ time += 60 * 60 * 24;
-+ rtc_time_to_tm(time, &alarm_tm);
-+ }
-+ ret = rtc_tm_to_time(&alarm_tm, &time);
-+
-+ /* clear all the interrupt status bits */
-+ writel(readl(MCF_RTC_ISR), MCF_RTC_ISR);
-+
-+ set_alarm_or_time(dev, MCF_RTC_ALARM, time);
-+
-+ return ret;
-+}
-+
-+/*!
-+ * This function is the RTC interrupt service routine.
-+ *
-+ * @param irq RTC IRQ number
-+ * @param dev_id device ID which is not used
-+ *
-+ * @return IRQ_HANDLED as defined in the include/linux/interrupt.h file.
-+ */
-+static irqreturn_t mcf_rtc_interrupt(int irq, void *dev_id)
-+{
-+ struct platform_device *pdev = dev_id;
-+ struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
-+ u32 status, events = 0;
-+
-+ spin_lock(&rtc_lock);
-+
-+ /* clear interrupt sources */
-+ status = readl(MCF_RTC_ISR) & readl(MCF_RTC_IER);
-+ writel(status, MCF_RTC_ISR);
-+
-+ /* clear alarm interrupt if it has occurred */
-+ if (status & MCF_RTC_ISR_ALM)
-+ status &= ~MCF_RTC_ISR_ALM;
-+
-+ /* update irq data & counter */
-+ if (status & MCF_RTC_ISR_ALM)
-+ events |= (RTC_AF | RTC_IRQF);
-+ if (status & MCF_RTC_ISR_1HZ)
-+ events |= (RTC_UF | RTC_IRQF);
-+ if (status & PIT_ALL_ON)
-+ events |= (RTC_PF | RTC_IRQF);
-+
-+ if ((status & MCF_RTC_ISR_ALM) && rtc_valid_tm(&g_rtc_alarm))
-+ rtc_update_alarm(&pdev->dev, &g_rtc_alarm);
-+
-+ spin_unlock(&rtc_lock);
-+ rtc_update_irq(pdata->rtc, 1, events);
-+ return IRQ_HANDLED;
-+}
-+
-+/*!
-+ * clear all interrupts and release the IRQ
-+ */
-+static void mcf_rtc_release(struct device *dev)
-+{
-+ spin_lock_irq(&rtc_lock);
-+ writel(0, MCF_RTC_IER); /* Disable all rtc interrupts */
-+ writel(0x0000FFBF, MCF_RTC_ISR); /* Clear all interrupt status */
-+ spin_unlock_irq(&rtc_lock);
-+ rtc_status = 0;
-+}
-+
-+/*!
-+ * This function is used to support some ioctl calls directly.
-+ * Other ioctl calls are supported indirectly through the
-+ * arm/common/rtctime.c file.
-+ *
-+ * @param cmd ioctl command as defined in include/linux/rtc.h
-+ * @param arg value for the ioctl command
-+ *
-+ * @return 0 if successful or negative value otherwise.
-+ */
-+static int mcf_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int i;
-+
-+ switch (cmd) {
-+ case RTC_PIE_OFF:
-+ writel((readl(MCF_RTC_IER) & ~PIT_ALL_ON), MCF_RTC_IER);
-+ return 0;
-+ case RTC_IRQP_SET:
-+ if (arg < 2 || arg > MAX_PIE_FREQ || (arg % 2) != 0)
-+ return -EINVAL; /* Also make sure a power of 2Hz */
-+ if ((arg > 64) && (!capable(CAP_SYS_RESOURCE)))
-+ return -EACCES;
-+ rtc_freq = arg;
-+ return 0;
-+ case RTC_IRQP_READ:
-+ return put_user(rtc_freq, (u32 *) arg);
-+ case RTC_PIE_ON:
-+ for (i = 0; i < MAX_PIE_NUM; i++) {
-+ if (PIE_BIT_DEF[i][0] == rtc_freq)
-+ break;
-+ }
-+ if (i == MAX_PIE_NUM)
-+ return -EACCES;
-+ spin_lock_irq(&rtc_lock);
-+ writel((readl(MCF_RTC_IER) | PIE_BIT_DEF[i][1]), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+ case RTC_AIE_OFF:
-+ spin_lock_irq(&rtc_lock);
-+ writel((readl(MCF_RTC_IER) & ~MCF_RTC_ISR_ALM), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+
-+ case RTC_AIE_ON:
-+ spin_lock_irq(&rtc_lock);
-+ writel((readl(MCF_RTC_IER) | MCF_RTC_ISR_ALM), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+
-+ case RTC_UIE_OFF: /* UIE is for the 1Hz interrupt */
-+ spin_lock_irq(&rtc_lock);
-+ writel((readl(MCF_RTC_IER) & ~MCF_RTC_ISR_1HZ), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+
-+ case RTC_UIE_ON:
-+ spin_lock_irq(&rtc_lock);
-+ writel((readl(MCF_RTC_IER) | MCF_RTC_ISR_1HZ), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+ }
-+ return -ENOIOCTLCMD;
-+}
-+
-+/*!
-+ * This function reads the current RTC time into tm in Gregorian date.
-+ *
-+ * @param tm contains the RTC time value upon return
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int mcf_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ u32 val;
-+
-+ /* Avoid roll-over from reading the different registers */
-+ do {
-+ val = get_alarm_or_time(dev, MCF_RTC_TIME);
-+ } while (val != get_alarm_or_time(dev, MCF_RTC_TIME));
-+
-+ rtc_time_to_tm(val, tm);
-+ return 0;
-+}
-+
-+/*!
-+ * This function sets the internal RTC time based on tm in Gregorian date.
-+ *
-+ * @param tm the time value to be set in the RTC
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int mcf_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ unsigned long time;
-+ int ret;
-+
-+ ret = rtc_tm_to_time(tm, &time);
-+ if (ret != 0)
-+ return ret;
-+
-+ /* Avoid roll-over from reading the different registers */
-+ do {
-+ set_alarm_or_time(dev, MCF_RTC_TIME, time);
-+ } while (time != get_alarm_or_time(dev, MCF_RTC_TIME));
-+
-+ return ret;
-+}
-+
-+/*!
-+ * This function reads the current alarm value into the passed in \b alrm
-+ * argument. It updates the \b alrm's pending field value based on the whether
-+ * an alarm interrupt occurs or not.
-+ *
-+ * @param alrm contains the RTC alarm value upon return
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int mcf_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ rtc_time_to_tm(get_alarm_or_time(dev, MCF_RTC_ALARM), &alrm->time);
-+ alrm->pending = ((readl(MCF_RTC_ISR) & MCF_RTC_ISR_ALM) != 0) ? 1 : 0;
-+
-+ return 0;
-+}
-+
-+/*!
-+ * This function sets the RTC alarm based on passed in alrm.
-+ *
-+ * @param alrm the alarm value to be set in the RTC
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int mcf_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ int ret;
-+
-+ spin_lock_irq(&rtc_lock);
-+ if (rtc_valid_tm(&alrm->time)) {
-+ if (alrm->time.tm_sec > 59 ||
-+ alrm->time.tm_hour > 23 || alrm->time.tm_min > 59) {
-+ ret = -EINVAL;
-+ goto out;
-+ }
-+ ret = rtc_update_alarm(dev, &alrm->time);
-+ } else {
-+ ret = rtc_valid_tm(&alrm->time);
-+ if (ret)
-+ goto out;
-+ ret = rtc_update_alarm(dev, &alrm->time);
-+ }
-+
-+ if (ret == 0) {
-+ memcpy(&g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
-+
-+ if (alrm->enabled) {
-+ writel((readl(MCF_RTC_IER) | MCF_RTC_ISR_ALM),
-+ MCF_RTC_IER);
-+ } else {
-+ writel((readl(MCF_RTC_IER) & ~MCF_RTC_ISR_ALM),
-+ MCF_RTC_IER);
-+ }
-+ }
-+out:
-+ spin_unlock_irq(&rtc_lock);
-+
-+ return ret;
-+}
-+
-+/*!
-+ * This function is used to provide the content for the /proc/driver/rtc
-+ * file.
-+ *
-+ * @param buf the buffer to hold the information that the driver
-+ * wants to write
-+ *
-+ * @return The number of bytes written into the rtc file.
-+ */
-+static int mcf_rtc_proc(struct device *dev, struct seq_file *sq)
-+{
-+ char *p = sq->buf;
-+
-+ p += sprintf(p, "alarm_IRQ\t: %s\n",
-+ (((readl(MCF_RTC_IER)) & MCF_RTC_ISR_ALM) !=
-+ 0) ? "yes" : "no");
-+ p += sprintf(p, "update_IRQ\t: %s\n",
-+ (((readl(MCF_RTC_IER)) & MCF_RTC_ISR_1HZ) !=
-+ 0) ? "yes" : "no");
-+ p += sprintf(p, "periodic_IRQ\t: %s\n",
-+ (((readl(MCF_RTC_IER)) & PIT_ALL_ON) !=
-+ 0) ? "yes" : "no");
-+ p += sprintf(p, "periodic_freq\t: %d\n", rtc_freq);
-+
-+ return p - (sq->buf);
-+}
-+
-+/*!
-+ * The RTC driver structure
-+ */
-+static struct rtc_class_ops mcf_rtc_ops = {
-+ .ioctl = mcf_rtc_ioctl,
-+ .read_time = mcf_rtc_read_time,
-+ .set_time = mcf_rtc_set_time,
-+ .read_alarm = mcf_rtc_read_alarm,
-+ .set_alarm = mcf_rtc_set_alarm,
-+ .proc = mcf_rtc_proc,
-+};
-+
-+static int __devinit mcf_rtc_probe(struct platform_device *pdev)
-+{
-+ struct timespec tv;
-+ struct rtc_device *rtc;
-+ struct rtc_plat_data *pdata = NULL;
-+ u32 ret = 0;
-+
-+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-+ if (!pdata)
-+ return -ENOMEM;
-+ /* External clock is hard wired to 32768Hz.
-+ * Clock settings 32K, 38.4K and 48K are defined above. */
-+#if defined(CONFIG_M5227x) | defined(CONFIG_M5445X)
-+ writel(0, MCF_RTC_GOCU);
-+ writel(RTC_INPUT_CLK_32768HZ, MCF_RTC_GOCL);
-+#endif
-+ /* Configure and enable the RTC */
-+ pdata->irq = MCFINT_VECBASE + MCFINT_RTC;
-+ if (request_irq(pdata->irq, mcf_rtc_interrupt, IRQF_DISABLED,
-+ pdev->name, pdev) < 0) {
-+ dev_warn(&pdev->dev, "interrupt not available.\n");
-+ pdata->irq = -1;
-+ }
-+
-+ if (test_and_set_bit(1, &rtc_status))
-+ return -EBUSY;
-+
-+ rtc = rtc_device_register(pdev->name, &pdev->dev, &mcf_rtc_ops,
-+ THIS_MODULE);
-+ if (IS_ERR(rtc)) {
-+ ret = PTR_ERR(rtc);
-+ if (pdata->irq >= 0)
-+ free_irq(pdata->irq, pdev);
-+ kfree(pdata);
-+ return ret;
-+ }
-+ pdata->rtc = rtc;
-+ platform_set_drvdata(pdev, pdata);
-+
-+ tv.tv_nsec = 0;
-+ tv.tv_sec = get_alarm_or_time(&pdev->dev, MCF_RTC_TIME);
-+
-+#ifdef CONFIG_M5301x
-+ writel(RTC_INPUT_CLK_32768HZ, MCF_RTC_GOC);
-+ writel(0x08, MCF_RTC_OCEN);
-+#endif
-+ writeb(4, MCFSIM_ICR_RTC);
-+
-+ writel(MCF_RTC_IER_1HZ, MCF_RTC_IER); /* Unmask the 1Hz timer */
-+
-+ writel(MCF_RTC_CR_EN, MCF_RTC_CR);
-+ if ((readl(MCF_RTC_CR) & MCF_RTC_CR_EN) == 0) {
-+ printk(KERN_ALERT "RTC Hardware couldn't be enabled!\n");
-+ return -EPERM;
-+ }
-+
-+ printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION);
-+ return ret;
-+}
-+
-+static int __devexit mcf_rtc_remove(struct platform_device *pdev)
-+{
-+ struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
-+
-+ rtc_device_unregister(pdata->rtc);
-+ if (pdata->irq >= 0)
-+ free_irq(pdata->irq, pdev);
-+ kfree(pdata);
-+ mcf_rtc_release(NULL);
-+ return 0;
-+}
-+
-+/*!
-+ * Contains pointers to the power management callback functions.
-+ */
-+MODULE_ALIAS("mcf-rtc");
-+static struct platform_driver mcf_rtc_driver = {
-+ .driver = {
-+ .name = "mcf-rtc",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = mcf_rtc_probe,
-+ .remove = __devexit_p(mcf_rtc_remove),
-+};
-+
-+/*!
-+ * This function creates the /proc/driver/rtc file and registers the device RTC
-+ * in the /dev/misc directory. It also reads the RTC value from external source
-+ * and setup the internal RTC properly.
-+ *
-+ * @return -1 if RTC is failed to initialize; 0 is successful.
-+ */
-+static int __init mcf_rtc_init(void)
-+{
-+ return platform_driver_register(&mcf_rtc_driver);
-+}
-+
-+/*!
-+ * This function removes the /proc/driver/rtc file and un-registers the
-+ * device RTC from the /dev/misc directory.
-+ */
-+static void __exit mcf_rtc_exit(void)
-+{
-+ platform_driver_unregister(&mcf_rtc_driver);
-+
-+}
-+
-+module_init(mcf_rtc_init);
-+module_exit(mcf_rtc_exit);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("Real Time Clock Driver (MCF)");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/coldfire/patches/027-Add-RTC-driver-support-on-MCF5441x-platform.patch b/target/linux/coldfire/patches/027-Add-RTC-driver-support-on-MCF5441x-platform.patch
deleted file mode 100644
index 78ae75d..0000000
--- a/target/linux/coldfire/patches/027-Add-RTC-driver-support-on-MCF5441x-platform.patch
+++ /dev/null
@@ -1,681 +0,0 @@
-From 6462d09dad154b69ea6180c0acb2d009627ff1be Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:46 +0800
-Subject: [PATCH 27/52] Add RTC driver support on MCF5441x platform
-
-Support on-chip robust-RTC module on MCF5441x platform.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/rtc/Kconfig | 9 +
- drivers/rtc/Makefile | 1 +
- drivers/rtc/rtc-m5441x.c | 638 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 648 insertions(+), 0 deletions(-)
- create mode 100644 drivers/rtc/rtc-m5441x.c
-
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -928,6 +928,15 @@ config RTC_MCF
-
- If you build it as a module it will be call mcf-rtc.
-
-+config RTC_M5441X
-+ tristate "Freescale Coldfire M5441X platform Real Time Clock"
-+ depends on COLDFIRE
-+ help
-+ If you say yes here you will get support for the on-chip Coldfire
-+ Real-Time Clock for mcf5441x platform.
-+
-+ If you build it as a module it will be call rtc-m5441x.
-+
- config RTC_DRV_PS3
- tristate "PS3 RTC"
- depends on PPC_PS3
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -103,3 +103,4 @@ obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm83
- obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o
- obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
- obj-$(CONFIG_RTC_MCF) += rtc-mcf.o
-+obj-$(CONFIG_RTC_M5441X) += rtc-m5441x.o
---- /dev/null
-+++ b/drivers/rtc/rtc-m5441x.c
-@@ -0,0 +1,638 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Lanttor.Guo@freescale.com
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/*
-+ * Implementation based on rtc-mcf.c
-+ */
-+
-+/*
-+ * RTC Real Time Clock (RTC) Driver
-+ *
-+ * @file rtc-m5441x.c
-+ * @brief Real Time Clock interface
-+ *
-+ * This file contains Real Time Clock interface for Linux.
-+ *
-+ */
-+#include <linux/rtc.h>
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/uaccess.h>
-+#include <asm/mcfsim.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+
-+#ifdef readw
-+#undef readw
-+#endif
-+
-+#ifdef writew
-+#undef writew
-+#endif
-+
-+#define readw(addr) in_be16(addr)
-+#define writew(val, addr) out_be16((addr), (val))
-+
-+
-+#define PIT_ALL_ON (MCF_RTC_ISR_2HZ | MCF_RTC_ISR_SAM0 | MCF_RTC_ISR_SAM1 | \
-+ MCF_RTC_ISR_SAM2 | MCF_RTC_ISR_SAM3 | MCF_RTC_ISR_SAM4 | \
-+ MCF_RTC_ISR_SAM5 | MCF_RTC_ISR_SAM6 | MCF_RTC_ISR_SAM7)
-+
-+#define MAX_PIE_NUM 9
-+#define MAX_PIE_FREQ 512
-+const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = {
-+ {2, MCF_RTC_ISR_2HZ},
-+ {4, MCF_RTC_ISR_SAM0},
-+ {8, MCF_RTC_ISR_SAM1},
-+ {16, MCF_RTC_ISR_SAM2},
-+ {32, MCF_RTC_ISR_SAM3},
-+ {64, MCF_RTC_ISR_SAM4},
-+ {128, MCF_RTC_ISR_SAM5},
-+ {256, MCF_RTC_ISR_SAM6},
-+ {MAX_PIE_FREQ, MCF_RTC_ISR_SAM7},
-+};
-+
-+/* Those are the bits from a classic RTC we want to mimic */
-+#define RTC_IRQF 0x80 /* any of the following 3 is active */
-+#define RTC_PF 0x40 /* Periodic interrupt */
-+#define RTC_AF 0x20 /* Alarm interrupt */
-+#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */
-+
-+#define MCF_RTC_TIME 0
-+#define MCF_RTC_ALARM 1
-+
-+struct rtc_plat_data {
-+ struct rtc_device *rtc;
-+ int irq;
-+ unsigned int irqen;
-+ int alrm_sec;
-+ int alrm_min;
-+ int alrm_hour;
-+ int alrm_mday;
-+};
-+
-+static const int year_cal_basic = 2112;
-+
-+#define RTC_VERSION "0.1"
-+
-+static u32 rtc_freq = 2; /* minimun value for PIE */
-+static unsigned long rtc_status;
-+
-+static struct rtc_time g_rtc_alarm = {
-+ .tm_year = 0,
-+ .tm_mon = 0,
-+ .tm_mday = 0,
-+ .tm_hour = 0,
-+ .tm_mon = 0,
-+ .tm_sec = 0,
-+};
-+
-+static DEFINE_SPINLOCK(rtc_lock);
-+
-+
-+/*
-+ * This funciton is used to disable RTC register write protection
-+ */
-+static void disable_register_write_protection(void)
-+{
-+ if (readw(MCF_RTC_SR) & MCF_RTC_SR_WPE) {
-+ writew(0x0000, MCF_RTC_CR);
-+ writew(0x0001, MCF_RTC_CR);
-+ writew(0x0003, MCF_RTC_CR);
-+ writew(0x0002, MCF_RTC_CR);
-+ }
-+
-+}
-+
-+/*
-+ * This function is used to obtain the RTC time or the alarm value in
-+ * second.
-+ *
-+ * @param time_alarm use MCF_RTC_TIME for RTC time value;
-+ * MCF_RTC_ALARM for alarm value
-+ *
-+ * @return The RTC time or alarm time in second.
-+ */
-+static u32 get_alarm_or_time(struct device *dev, int time_alarm,
-+ struct rtc_time *tm)
-+{
-+ dev_dbg(dev, "debug function %s()!\n", __func__);
-+
-+ if (time_alarm == MCF_RTC_TIME) {
-+ /*check register information */
-+ dev_dbg(dev, "RTC_YEARMON:0x%x,RTC_DAYS:0x%x,RTC_HOURMIN:0x%x,"
-+ "RTC_SECONDS:0x%x\n", readw(MCF_RTC_YEARMON),
-+ readw(MCF_RTC_DAYS), readw(MCF_RTC_HOURMIN),
-+ readw(MCF_RTC_SECONDS));
-+
-+ /* get year */
-+ tm->tm_year = year_cal_basic +
-+ (char)(MCF_RTC_YEARMON_YEAR_RD(readw(MCF_RTC_YEARMON)));
-+ /* get month */
-+ tm->tm_mon =
-+ MCF_RTC_YEARMON_MON_RD(readw(MCF_RTC_YEARMON)) - 1;
-+ /* get month day */
-+ tm->tm_mday = MCF_RTC_DAYS_DAY_RD(readw(MCF_RTC_DAYS));
-+ /* get year day */
-+ tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon,
-+ tm->tm_year);
-+ /* year minus 1900 */
-+ tm->tm_year = tm->tm_year - 1900;
-+ /* get week day */
-+ tm->tm_wday = MCF_RTC_DAYS_DAYWEEK_RD(readw(MCF_RTC_DAYS));
-+ /* get hours */
-+ tm->tm_hour =
-+ MCF_RTC_HOURMIN_HOURS_RD(readw(MCF_RTC_HOURMIN));
-+ /* get minutes */
-+ tm->tm_min =
-+ MCF_RTC_HOURMIN_MINUTES_RD(readw(MCF_RTC_HOURMIN));
-+ /* get seconds */
-+ tm->tm_sec =
-+ MCF_RTC_SECONDS_SECONDS_RD(readw(MCF_RTC_SECONDS));
-+ /* no day saving time */
-+ tm->tm_isdst = -1;
-+
-+ /* check rtc_tm fileds information */
-+ dev_dbg(dev, "RTC TIME --> year:%d,yday:%d,mon:%d,mday:%d,"
-+ "wday:%d,hour:%d,min:%d,sec:%d\n", tm->tm_year,
-+ tm->tm_yday, tm->tm_mon, tm->tm_mday, tm->tm_wday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+
-+ } else if (time_alarm == MCF_RTC_ALARM) {
-+ tm->tm_year = year_cal_basic +
-+ (char)MCF_RTC_YEARMON_YEAR_RD
-+ (readw(MCF_RTC_ALRM_YRMON));
-+ tm->tm_mon =
-+ MCF_RTC_YEARMON_MON_RD(readw(MCF_RTC_ALRM_YRMON)) - 1;
-+ tm->tm_mday = MCF_RTC_DAYS_DAY_RD(readw(MCF_RTC_ALRM_DAYS));
-+ tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon,
-+ tm->tm_year);
-+ tm->tm_year = tm->tm_year - 1900;
-+ tm->tm_wday =
-+ MCF_RTC_DAYS_DAYWEEK_RD(readw(MCF_RTC_ALRM_DAYS));
-+ tm->tm_hour =
-+ MCF_RTC_HOURMIN_HOURS_RD(readw(MCF_RTC_ALRM_HM));
-+ tm->tm_min =
-+ MCF_RTC_HOURMIN_MINUTES_RD(readw(MCF_RTC_ALRM_HM));
-+ tm->tm_sec =
-+ MCF_RTC_SECONDS_SECONDS_RD(readw(MCF_RTC_ALRM_SEC));
-+ tm->tm_isdst = -1;
-+
-+ /* debug information */
-+ dev_dbg(dev, "RTC ALARM --> year:%d,yday:%d,mon:%d,mday:%d,"
-+ "wday:%d,hour:%d,min:%d,sec:%d\n", tm->tm_year,
-+ tm->tm_yday, tm->tm_mon, tm->tm_mday, tm->tm_wday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+
-+ } else {
-+ panic("wrong value for time_alarm=%d\n", time_alarm);
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * This function sets the RTC alarm value or the time value.
-+ *
-+ * @param time_alarm the new alarm value to be updated in the RTC
-+ * @param time use MCF_RTC_TIME for RTC time value;
-+ * MCF_RTC_ALARM for alarm value
-+ */
-+static void set_alarm_or_time(struct device *dev, int time_alarm,
-+ struct rtc_time *tm)
-+{
-+ char year;
-+
-+ dev_dbg(dev, "debug function %s()!\n", __func__);
-+
-+ /* wirte enable setting */
-+ disable_register_write_protection();
-+
-+ if (time_alarm == MCF_RTC_TIME) {
-+ /* check rtc_time fields information */
-+ dev_dbg(dev, "RTC TIME --> year:%d,yday:%d,mon:%d,mday:%d,"
-+ "wday:%d,hour:%d,min:%d,sec:%d\n", tm->tm_year,
-+ tm->tm_yday, tm->tm_mon, tm->tm_mday, tm->tm_wday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+
-+ year = ((tm->tm_year + 1900) - year_cal_basic);
-+ /* write RTC_YEARMON register */
-+ writew((year << 8) | (tm->tm_mon + 1), MCF_RTC_YEARMON);
-+
-+ /* write RTC_DAYS register */
-+ writew(MCF_RTC_DAYS_DAYWEEK_SET(tm->tm_wday) |
-+ MCF_RTC_DAYS_DAY_SET(tm->tm_mday), MCF_RTC_DAYS);
-+
-+ /* write RTC_HOURMIN register */
-+ writew(MCF_RTC_HOURMIN_HOURS_SET(tm->tm_hour) |
-+ MCF_RTC_HOURMIN_MINUTES_SET(tm->tm_min),
-+ MCF_RTC_HOURMIN);
-+
-+ /* write RTC_SECONDS register */
-+ writew(MCF_RTC_SECONDS_SECONDS_SET
-+ (tm->tm_sec), MCF_RTC_SECONDS);
-+
-+ /* debug information */
-+ dev_dbg(dev, "RTC_YEARMON:0x%x, RTC_DAYS:0x%x, "
-+ "RTC_HOURMIN:0x%x, RTC_SECONDS:0x%x\n",
-+ readw(MCF_RTC_YEARMON), readw(MCF_RTC_DAYS),
-+ readw(MCF_RTC_HOURMIN), readw(MCF_RTC_SECONDS));
-+ } else if (time_alarm == MCF_RTC_ALARM) {
-+
-+ year = ((tm->tm_year + 1900) - year_cal_basic);
-+ /* write RTC_YEARMON register */
-+ writew((year << 8) | (tm->tm_mon + 1), MCF_RTC_ALRM_YRMON);
-+
-+ /* write RTC_DAYS register */
-+ writew(MCF_RTC_DAYS_DAYWEEK_SET(tm->tm_wday) |
-+ MCF_RTC_DAYS_DAY_SET(tm->tm_mday), MCF_RTC_ALRM_DAYS);
-+
-+ /* write RTC_HOURMIN register */
-+ writew(MCF_RTC_HOURMIN_HOURS_SET(tm->tm_hour) |
-+ MCF_RTC_HOURMIN_MINUTES_SET(tm->tm_min),
-+ MCF_RTC_ALRM_HM);
-+
-+ /* write RTC_SECONDS register */
-+ writew(MCF_RTC_SECONDS_SECONDS_SET
-+ (tm->tm_sec), MCF_RTC_ALRM_SEC);
-+
-+ /* debug information */
-+ dev_dbg(dev, "ALRM_YRMON:0x%x,ALRM_DAYS:0x%x,ALRM_HM:0x%x,"
-+ "ALRM_SEC:0x%x\n", readw(MCF_RTC_ALRM_YRMON),
-+ readw(MCF_RTC_ALRM_DAYS), readw(MCF_RTC_ALRM_HM),
-+ readw(MCF_RTC_ALRM_SEC));
-+ } else {
-+ panic("wrong value for time_alarm=%d\n", time_alarm);
-+ }
-+}
-+
-+/*!
-+ * This function updates the RTC alarm registers and then clears all the
-+ * interrupt status bits.
-+ *
-+ * @param alrm the new alarm value to be updated in the RTC
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
-+{
-+ /* clear all the interrupt status bits */
-+ disable_register_write_protection();
-+
-+ writew(readw(MCF_RTC_ISR), MCF_RTC_ISR);
-+
-+ set_alarm_or_time(dev, MCF_RTC_ALARM, alrm);
-+
-+ return 0;
-+}
-+
-+/*!
-+ * This function is the RTC interrupt service routine.
-+ *
-+ * @param irq RTC IRQ number
-+ * @param dev_id device ID which is not used
-+ *
-+ * @return IRQ_HANDLED as defined in the include/linux/interrupt.h file.
-+ */
-+static irqreturn_t mcf_rtc_interrupt(int irq, void *dev_id)
-+{
-+ struct platform_device *pdev = dev_id;
-+ struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
-+ u16 status = 0;
-+ u32 events = 0;
-+
-+ spin_lock(&rtc_lock);
-+
-+ /* clear interrupt sources */
-+ status = readw(MCF_RTC_ISR) & readw(MCF_RTC_IER);
-+
-+ disable_register_write_protection();
-+
-+ writew(status, MCF_RTC_ISR);
-+
-+ /* clear alarm interrupt if it has occurred */
-+ if (status & MCF_RTC_ISR_ALM)
-+ status &= ~MCF_RTC_ISR_ALM;
-+
-+ /* update irq data & counter */
-+ if (status & MCF_RTC_ISR_ALM)
-+ events |= (RTC_AF | RTC_IRQF);
-+ if (status & MCF_RTC_ISR_1HZ)
-+ events |= (RTC_UF | RTC_IRQF);
-+ if (status & PIT_ALL_ON)
-+ events |= (RTC_PF | RTC_IRQF);
-+
-+ if ((status & MCF_RTC_ISR_ALM) && rtc_valid_tm(&g_rtc_alarm))
-+ rtc_update_alarm(&pdev->dev, &g_rtc_alarm);
-+
-+ spin_unlock(&rtc_lock);
-+ rtc_update_irq(pdata->rtc, 1, events);
-+ return IRQ_HANDLED;
-+}
-+
-+/*!
-+ * clear all interrupts and release the IRQ
-+ */
-+static void mcf_rtc_release(struct device *dev)
-+{
-+ spin_lock_irq(&rtc_lock);
-+
-+ disable_register_write_protection();
-+
-+ writew(0, MCF_RTC_IER); /* Disable all rtc interrupts */
-+ writew(readw(MCF_RTC_ISR), MCF_RTC_ISR);
-+ spin_unlock_irq(&rtc_lock);
-+ rtc_status = 0;
-+}
-+
-+/*!
-+ * This function is used to support some ioctl calls directly.
-+ * Other ioctl calls are supported indirectly through the
-+ * arm/common/rtctime.c file.
-+ *
-+ * @param cmd ioctl command as defined in include/linux/rtc.h
-+ * @param arg value for the ioctl command
-+ *
-+ * @return 0 if successful or negative value otherwise.
-+ */
-+static int mcf_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int i;
-+
-+ disable_register_write_protection();
-+
-+ switch (cmd) {
-+ case RTC_PIE_OFF:
-+ writew((readw(MCF_RTC_IER) & ~PIT_ALL_ON), MCF_RTC_IER);
-+ return 0;
-+ case RTC_IRQP_SET:
-+ if (arg < 2 || arg > MAX_PIE_FREQ || (arg % 2) != 0)
-+ return -EINVAL; /* Also make sure a power of 2Hz */
-+ if ((arg > 64) && (!capable(CAP_SYS_RESOURCE)))
-+ return -EACCES;
-+ rtc_freq = arg;
-+ return 0;
-+ case RTC_IRQP_READ:
-+ return put_user(rtc_freq, (u32 *) arg);
-+ case RTC_PIE_ON:
-+ for (i = 0; i < MAX_PIE_NUM; i++) {
-+ if (PIE_BIT_DEF[i][0] == rtc_freq)
-+ break;
-+ }
-+ if (i == MAX_PIE_NUM)
-+ return -EACCES;
-+ spin_lock_irq(&rtc_lock);
-+ writew((readw(MCF_RTC_IER) | PIE_BIT_DEF[i][1]), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+ case RTC_AIE_OFF:
-+ spin_lock_irq(&rtc_lock);
-+ writew((readw(MCF_RTC_IER) & ~MCF_RTC_ISR_ALM), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+
-+ case RTC_AIE_ON:
-+ spin_lock_irq(&rtc_lock);
-+ writew((readw(MCF_RTC_IER) | MCF_RTC_ISR_ALM), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+
-+ case RTC_UIE_OFF: /* UIE is for the 1Hz interrupt */
-+ spin_lock_irq(&rtc_lock);
-+ writew((readw(MCF_RTC_IER) & ~MCF_RTC_ISR_1HZ), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+
-+ case RTC_UIE_ON:
-+ spin_lock_irq(&rtc_lock);
-+ writew((readw(MCF_RTC_IER) | MCF_RTC_ISR_1HZ), MCF_RTC_IER);
-+ spin_unlock_irq(&rtc_lock);
-+ return 0;
-+ }
-+ return -ENOIOCTLCMD;
-+}
-+
-+/*!
-+ * This function reads the current RTC time into tm in Gregorian date.
-+ *
-+ * @param tm contains the RTC time value upon return
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int mcf_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ do {
-+ get_alarm_or_time(dev, MCF_RTC_TIME, tm);
-+ } while (0);
-+
-+ return 0;
-+}
-+
-+/*!
-+ * This function sets the internal RTC time based on tm in Gregorian date.
-+ *
-+ * @param tm the time value to be set in the RTC
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int mcf_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ do {
-+ set_alarm_or_time(dev, MCF_RTC_TIME, tm);
-+ } while (0);
-+
-+ return 0;
-+}
-+
-+/*!
-+ * This function reads the current alarm value into the passed in \b alrm
-+ * argument. It updates the \b alrm's pending field value based on the whether
-+ * an alarm interrupt occurs or not.
-+ *
-+ * @param alrm contains the RTC alarm value upon return
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int mcf_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ do {
-+ get_alarm_or_time(dev, MCF_RTC_ALARM, &alrm->time);
-+ } while (0);
-+
-+ alrm->pending = ((readw(MCF_RTC_ISR) & MCF_RTC_ISR_ALM) != 0) ? 1 : 0;
-+
-+ return 0;
-+}
-+
-+/*!
-+ * This function sets the RTC alarm based on passed in alrm.
-+ *
-+ * @param alrm the alarm value to be set in the RTC
-+ *
-+ * @return 0 if successful; non-zero otherwise.
-+ */
-+static int mcf_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ int ret;
-+
-+ spin_lock_irq(&rtc_lock);
-+
-+ disable_register_write_protection();
-+
-+ if (rtc_valid_tm(&alrm->time)) {
-+ if (alrm->time.tm_sec > 59 ||
-+ alrm->time.tm_hour > 23 || alrm->time.tm_min > 59) {
-+ ret = -EINVAL;
-+ goto out;
-+ }
-+ ret = rtc_update_alarm(dev, &alrm->time);
-+ } else {
-+ ret = rtc_valid_tm(&alrm->time);
-+ if (ret)
-+ goto out;
-+ ret = rtc_update_alarm(dev, &alrm->time);
-+ }
-+
-+ if (ret == 0) {
-+ memcpy(&g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
-+
-+ if (alrm->enabled) {
-+ writew((readw(MCF_RTC_IER) | MCF_RTC_ISR_ALM),
-+ MCF_RTC_IER);
-+ } else {
-+ writew((readw(MCF_RTC_IER) & ~MCF_RTC_ISR_ALM),
-+ MCF_RTC_IER);
-+ }
-+ }
-+out:
-+ spin_unlock_irq(&rtc_lock);
-+
-+ return ret;
-+}
-+
-+/*!
-+ * The RTC driver structure
-+ */
-+static struct rtc_class_ops mcf_rtc_ops = {
-+ .ioctl = mcf_rtc_ioctl,
-+ .read_time = mcf_rtc_read_time,
-+ .set_time = mcf_rtc_set_time,
-+ .read_alarm = mcf_rtc_read_alarm,
-+ .set_alarm = mcf_rtc_set_alarm,
-+};
-+
-+static int __devinit mcf_rtc_probe(struct platform_device *pdev)
-+{
-+ struct rtc_device *rtc;
-+ struct rtc_plat_data *pdata = NULL;
-+ u32 ret = 0;
-+
-+ disable_register_write_protection();
-+ /* Clear interrupt before request irq */
-+ writew(0x0100, MCF_RTC_CR);
-+ writew(0x0001, MCF_RTC_IER);
-+
-+ if (!(readw(MCF_RTC_CFG_DATA) & MCF_RTC_CFG_DATA_OSCEN))
-+ writew(MCF_RTC_CFG_DATA_OSCEN, MCF_RTC_CFG_DATA);
-+
-+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-+ if (!pdata)
-+ return -ENOMEM;
-+
-+ pdata->irq = MCFINT_VECBASE + MCFINT_RTC;
-+ if (request_irq(pdata->irq, mcf_rtc_interrupt, IRQF_DISABLED,
-+ pdev->name, pdev) < 0) {
-+ dev_warn(&pdev->dev, "interrupt not available.\n");
-+ pdata->irq = -1;
-+ }
-+
-+ if (test_and_set_bit(1, &rtc_status))
-+ return -EBUSY;
-+
-+ rtc = rtc_device_register(pdev->name, &pdev->dev, &mcf_rtc_ops,
-+ THIS_MODULE);
-+ if (IS_ERR(rtc)) {
-+ ret = PTR_ERR(rtc);
-+ if (pdata->irq >= 0)
-+ free_irq(pdata->irq, pdev);
-+ kfree(pdata);
-+ return ret;
-+ }
-+ pdata->rtc = rtc;
-+ platform_set_drvdata(pdev, pdata);
-+
-+ dev_dbg(&pdev->dev, "RTC_CR:0x%x, RTC_SR:0x%x\n", readw(MCF_RTC_CR),
-+ readw(MCF_RTC_SR));
-+
-+ printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION);
-+ return ret;
-+}
-+
-+static int __devexit mcf_rtc_remove(struct platform_device *pdev)
-+{
-+ struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
-+
-+ rtc_device_unregister(pdata->rtc);
-+ if (pdata->irq >= 0)
-+ free_irq(pdata->irq, pdev);
-+ kfree(pdata);
-+ mcf_rtc_release(NULL);
-+ return 0;
-+}
-+
-+/*!
-+ * Contains pointers to the power management callback functions.
-+ */
-+MODULE_ALIAS("rtc-m5441x");
-+static struct platform_driver mcf_rtc_driver = {
-+ .driver = {
-+ .name = "rtc-m5441x",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = mcf_rtc_probe,
-+ .remove = __devexit_p(mcf_rtc_remove),
-+};
-+
-+/*!
-+ * This function creates the /proc/driver/rtc file and registers the device RTC
-+ * in the /dev/misc directory. It also reads the RTC value from external source
-+ * and setup the internal RTC properly.
-+ *
-+ * @return -1 if RTC is failed to initialize; 0 is successful.
-+ */
-+static int __init mcf_rtc_init(void)
-+{
-+ return platform_driver_register(&mcf_rtc_driver);
-+}
-+
-+/*!
-+ * This function removes the /proc/driver/rtc file and un-registers the
-+ * device RTC from the /dev/misc directory.
-+ */
-+static void __exit mcf_rtc_exit(void)
-+{
-+ platform_driver_unregister(&mcf_rtc_driver);
-+
-+}
-+
-+module_init(mcf_rtc_init);
-+module_exit(mcf_rtc_exit);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("Real Time Clock Driver (MCF)");
-+MODULE_LICENSE("GPL V2");
diff --git a/target/linux/coldfire/patches/028-Add-SD-MMC-SDIO-over-SPI-support-for-MCF54451-and-MC.patch b/target/linux/coldfire/patches/028-Add-SD-MMC-SDIO-over-SPI-support-for-MCF54451-and-MC.patch
deleted file mode 100644
index 5cd981d..0000000
--- a/target/linux/coldfire/patches/028-Add-SD-MMC-SDIO-over-SPI-support-for-MCF54451-and-MC.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From d1b6aa1480c937e326bef99746299cd004a51f28 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:46 +0800
-Subject: [PATCH 28/52] Add SD/MMC/SDIO over SPI support for MCF54451 and MCF54418
-
-Add SD/MMC/SDIO over SPI support for MCF54451 and MCF54418.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/mmc/core/sdio.c | 9 +++++-
- drivers/mmc/host/Kconfig | 35 +++++++++++++++++++++
- drivers/mmc/host/mmc_spi.c | 73 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 116 insertions(+), 1 deletions(-)
-
---- a/drivers/mmc/core/sdio.c
-+++ b/drivers/mmc/core/sdio.c
-@@ -566,8 +566,15 @@ static void mmc_sdio_detect(struct mmc_h
- /*
- * Just check if our card has been removed.
- */
-+#if defined(M54451_SD_HW_DETECT)
-+ {
-+ unsigned char x;
-+ err = mmc_io_rw_direct(host->card, 0, 0,
-+ SDIO_FBR_BASE(0) + SDIO_FBR_CIS + 0, 0, &x);
-+ }
-+#else
- err = mmc_select_card(host->card);
--
-+#endif
- mmc_release_host(host);
-
- /*
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -368,6 +368,41 @@ config MMC_SPI
-
- If unsure, or if your system has no SPI master driver, say N.
-
-+config M54451_SD_HW_DETECT
-+ tristate "use extern IRQ7 to detect SD/MMC card"
-+ depends on MMC_SPI && M54451
-+ default y
-+ help
-+ MMC/SD interface on 54551evb was over SPI. Enable this option will
-+ use irq7 to dectect the card inserting/removing.
-+
-+config M5441X_SD_HW_DETECT
-+ tristate "use extern IRQ to detect SD/MMC card"
-+ depends on MMC_SPI && M5441X
-+ help
-+ MMC/SD interface on 54418evb was over SPI. Enable this option will
-+ use irq7 or irq1 to dectect the card inserting/removing.
-+
-+choice
-+ prompt "MMC/SD card detect "
-+ depends on M5441X_SD_HW_DETECT
-+
-+config DETECT_USE_EXTERN_IRQ7
-+ tristate "based extern IRQ7"
-+ depends on M5441X_SD_HW_DETECT
-+ help
-+ MMC/SD cards using spi controller,
-+ we use the extern irq7 to detect card.
-+
-+config DETECT_USE_EXTERN_IRQ1
-+ tristate "based extern IRQ1"
-+ depends on M5441X_SD_HW_DETECT
-+ help
-+ MMC/SD cards using spi controller,
-+ we use the extern irq1 to detect card.
-+
-+endchoice
-+
- config MMC_S3C
- tristate "Samsung S3C SD/MMC Card Interface support"
- depends on ARCH_S3C2410
---- a/drivers/mmc/host/mmc_spi.c
-+++ b/drivers/mmc/host/mmc_spi.c
-@@ -9,6 +9,10 @@
- * (C) Copyright 2007, ATRON electronic GmbH,
- * Jan Nikitenko <jan.nikitenko@gmail.com>
- *
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Modified for M54451EVB/M54418TWR boards.
-+ * Shrek Wu <b16972@freescale.com>
-+ * Jingchang Lu <b22599@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
-@@ -32,6 +36,14 @@
- #include <linux/crc7.h>
- #include <linux/crc-itu-t.h>
- #include <linux/scatterlist.h>
-+#if defined(CONFIG_M54451_SD_HW_DETECT)
-+#include <asm/mcf5445x_eport.h>
-+#include <asm/mcf5445x_intc.h>
-+#include <asm/mcfsim.h>
-+#elif defined(CONFIG_M5441X_SD_HW_DETECT)
-+#include <asm/mcf5441x_eport.h>
-+#include <asm/mcfsim.h>
-+#endif
-
- #include <linux/mmc/host.h>
- #include <linux/mmc/mmc.h> /* for R1_SPI_* bit values */
-@@ -268,6 +280,9 @@ static int mmc_spi_response_get(struct m
- unsigned short rotator;
- int i;
- char tag[32];
-+#if defined(CONFIG_M54451_SD_HW_DETECT) || defined(CONFIG_M5441X_SD_HW_DETECT)
-+ u8 oldcp_value = 0;
-+#endif
-
- snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
- cmd->opcode, maptype(cmd));
-@@ -278,6 +293,9 @@ static int mmc_spi_response_get(struct m
- * first byte. After STOP_TRANSMISSION command it may include
- * two data bits, but otherwise it's all ones.
- */
-+#if defined(CONFIG_M54451_SD_HW_DETECT) || defined(CONFIG_M5441X_SD_HW_DETECT)
-+ oldcp_value = *cp;
-+#endif
- cp += 8;
- while (cp < end && *cp == 0xff)
- cp++;
-@@ -310,6 +328,15 @@ static int mmc_spi_response_get(struct m
- }
-
- checkstatus:
-+#if defined(CONFIG_M54451_SD_HW_DETECT) || defined(CONFIG_M5441X_SD_HW_DETECT)
-+ if ((*cp == 0) && (oldcp_value == 0)) {
-+ dev_dbg(&host->spi->dev, "NO CARD in the SD SOCKET, "
-+ "new status %02x, old status %02x\n",
-+ *cp, oldcp_value);
-+ value = -EBADR;
-+ goto done;
-+ }
-+#endif
- bitshift = 0;
- if (*cp & 0x80) {
- /* Houston, we have an ugly card with a bit-shifted response */
-@@ -1313,7 +1340,53 @@ mmc_spi_detect_irq(int irq, void *mmc)
- struct mmc_spi_host *host = mmc_priv(mmc);
- u16 delay_msec = max(host->pdata->detect_delay, (u16)100);
-
-+#if defined(CONFIG_M54451_SD_HW_DETECT)
-+ dev_dbg(&host->spi->dev, "mmc_spi_detect_irq "
-+ "MCF_EPORT_EPPAR %x, MCF_EPORT_EPIER %x,"
-+ "MCF_INTC0_ICR7 %x, MCF_GPIO_PAR_IRQ %x,"
-+ "MCF_EPORT_EPDDR %x, MCF_EPORT_EPFR %x\n",
-+ MCF_EPORT_EPPAR, MCF_EPORT_EPIER,
-+ MCF_INTC0_ICR7, MCF_GPIO_PAR_IRQ,
-+ MCF_EPORT_EPDDR, MCF_EPORT_EPFR);
-+
-+ MCF_EPORT_EPIER &= (~MCF_EPORT_EPIER_EPIE7);
-+#elif defined(CONFIG_M5441X_SD_HW_DETECT)
-+#if defined(CONFIG_DETECT_USE_EXTERN_IRQ1)
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE1);
-+#elif defined(CONFIG_DETECT_USE_EXTERN_IRQ7)
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE7);
-+#else
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE7);
-+#endif
-+#endif
- mmc_detect_change(mmc, msecs_to_jiffies(delay_msec));
-+#if defined(CONFIG_M54451_SD_HW_DETECT)
-+ MCF_EPORT_EPPAR |= MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+ MCF_EPORT_EPFR |= MCF_EPORT_EPFR_EPF7;
-+ dev_dbg(&host->spi->dev, "mmc_spi_detect_irq "
-+ "MCF_EPORT_EPPAR %x, MCF_EPORT_EPIER %x,"
-+ "MCF_INTC0_ICR7 %x, MCF_GPIO_PAR_IRQ %x,"
-+ "MCF_EPORT_EPDDR %x, MCF_EPORT_EPFR %x\n",
-+ MCF_EPORT_EPPAR, MCF_EPORT_EPIER,
-+ MCF_INTC0_ICR7, MCF_GPIO_PAR_IRQ,
-+ MCF_EPORT_EPDDR, MCF_EPORT_EPFR);
-+
-+#elif defined(CONFIG_M5441X_SD_HW_DETECT)
-+#if defined(CONFIG_DETECT_USE_EXTERN_IRQ1)
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA1_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE1;
-+ MCF_EPORT_EPFR = MCF_EPORT_EPFR | MCF_EPORT_EPFR_EPF1;
-+#elif defined(CONFIG_DETECT_USE_EXTERN_IRQ7)
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+ MCF_EPORT_EPFR = MCF_EPORT_EPFR | MCF_EPORT_EPFR_EPF7;
-+#else
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+ MCF_EPORT_EPFR = MCF_EPORT_EPFR | MCF_EPORT_EPFR_EPF7;
-+#endif
-+#endif
- return IRQ_HANDLED;
- }
-
diff --git a/target/linux/coldfire/patches/029-Add-eSDHC-driver-for-MCF5441x.patch b/target/linux/coldfire/patches/029-Add-eSDHC-driver-for-MCF5441x.patch
deleted file mode 100644
index b1a7d46..0000000
--- a/target/linux/coldfire/patches/029-Add-eSDHC-driver-for-MCF5441x.patch
+++ /dev/null
@@ -1,2214 +0,0 @@
-From 73c65ac21faf1b016f8f8ddfab2dc3e58a5618f9 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:46 +0800
-Subject: [PATCH 29/52] Add eSDHC driver for MCF5441x
-
-Add eSDHC PIO mode(read and write) and DMA mode(read and write) support.
-Add card detect using extern irq.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/mmc/host/Kconfig | 35 +
- drivers/mmc/host/Makefile | 1 +
- drivers/mmc/host/esdhc.c | 1826 +++++++++++++++++++++++++++++++++++++++++++++
- drivers/mmc/host/esdhc.h | 310 ++++++++
- 4 files changed, 2172 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mmc/host/esdhc.c
- create mode 100644 drivers/mmc/host/esdhc.h
-
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -403,6 +403,41 @@ config DETECT_USE_EXTERN_IRQ1
-
- endchoice
-
-+config MMC_ESDHC
-+ tristate "Enhanced Secure Digital Host Controller Interface support"
-+ depends on M5441X
-+ help
-+ This select Freescale Enhanced SD Host Controller Interface.
-+ The controller is used in MCF5441x.
-+ If unsure, say N.
-+
-+config ESDHC_FORCE_PIO
-+ tristate "eSDHC force to use PIO (no DMA) mode"
-+ depends on MMC_ESDHC
-+ help
-+ This select Freescale Enhanced SD Host Controller Interface.
-+ The controller is used in MCF5441x.
-+ If unsure, say N.
-+
-+choice
-+ prompt "MMC/SD card detect "
-+ depends on MMC_ESDHC
-+
-+config ESDHC_DETECT_USE_EXTERN_IRQ7
-+ bool "based extern IRQ7"
-+ depends on MMC_ESDHC
-+ help
-+ MMC/SD cards using esdhc controller,
-+ we use the extern irq7 to detect card.
-+config ESDHC_DETECT_USE_EXTERN_IRQ1
-+ bool "based extern IRQ1"
-+ depends on MMC_ESDHC
-+ help
-+ MMC/SD cards using esdhc controller,
-+ we use the extern irq7 to detect card.
-+
-+endchoice
-+
- config MMC_S3C
- tristate "Samsung S3C SD/MMC Card Interface support"
- depends on ARCH_S3C2410
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -28,6 +28,7 @@ endif
- obj-$(CONFIG_MMC_S3C) += s3cmci.o
- obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
- obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
-+obj-$(CONFIG_MMC_ESDHC) += esdhc.o
- obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
- obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
- obj-$(CONFIG_GPIOMMC) += gpiommc.o
---- /dev/null
-+++ b/drivers/mmc/host/esdhc.c
-@@ -0,0 +1,1826 @@
-+/*
-+ * drivers/mmc/host/esdhc.c
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Chenghu Wu <b16972@freescale.com>
-+ * Xiaobo Xie <X.Xie@freescale.com>
-+ *
-+ * Freescale Enhanced Secure Digital Host Controller driver.
-+ * Based on mpc837x/driver/mmc/host/esdhc.c done by Xiaobo Xie
-+ * Ported to Coldfire platform by Chenghu Wu
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/highmem.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/scatterlist.h>
-+#include <linux/uaccess.h>
-+#include <linux/irq.h>
-+#include <linux/io.h>
-+#include <linux/slab.h>
-+#include <linux/mmc/host.h>
-+
-+#include <asm/dma.h>
-+#include <asm/page.h>
-+
-+#include <linux/platform_device.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+
-+#include "esdhc.h"
-+#define DRIVER_NAME "esdhc"
-+
-+
-+#if defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1)
-+#define card_detect_extern_irq (64 + 1)
-+#elif defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ7)
-+#define card_detect_extern_irq (64 + 7)
-+#else
-+#define card_detect_extern_irq (64 + 7)
-+#endif
-+
-+#undef ESDHC_DMA_KMALLOC
-+
-+#define SYS_BUSCLOCK 80000000
-+#define ESDHC_DMA_SIZE 0x10000
-+
-+#undef MMC_ESDHC_DEBUG
-+#undef MMC_ESDHC_DEBUG_REG
-+
-+#ifdef MMC_ESDHC_DEBUG
-+#define DBG(fmt, args...) printk(KERN_INFO "[%s] " fmt "\n", __func__, ## args)
-+#else
-+#define DBG(fmt, args...) do {} while (0)
-+#endif
-+
-+#ifdef MMC_ESDHC_DEBUG_REG
-+static void esdhc_dumpregs(struct esdhc_host *host)
-+{
-+ printk(KERN_INFO "========= REGISTER DUMP ==========\n");
-+
-+ printk(KERN_INFO "Sysaddr: 0x%08x | Blkattr: 0x%08x\n",
-+ fsl_readl(host->ioaddr + ESDHC_DMA_ADDRESS),
-+ fsl_readl(host->ioaddr + ESDHC_BLOCK_ATTR));
-+ printk(KERN_INFO "Argument: 0x%08x | COMMAND: 0x%08x\n",
-+ fsl_readl(host->ioaddr + ESDHC_ARGUMENT),
-+ fsl_readl(host->ioaddr + ESDHC_COMMAND));
-+ printk(KERN_INFO "Present: 0x%08x | DMA ctl: 0x%08x\n",
-+ fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE),
-+ fsl_readl(host->ioaddr + ESDHC_DMA_SYSCTL));
-+ printk(KERN_INFO "PROCTL: 0x%08x | SYSCTL: 0x%08x\n",
-+ fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL),
-+ fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL));
-+ printk(KERN_INFO "Int stat: 0x%08x\n",
-+ fsl_readl(host->ioaddr + ESDHC_INT_STATUS));
-+ printk(KERN_INFO "Intenab: 0x%08x | Sigenab: 0x%08x\n",
-+ fsl_readl(host->ioaddr + ESDHC_INT_ENABLE),
-+ fsl_readl(host->ioaddr + ESDHC_SIGNAL_ENABLE));
-+ printk(KERN_INFO "AC12 err: 0x%08x | Version: 0x%08x\n",
-+ fsl_readl(host->ioaddr + ESDHC_ACMD12_ERR),
-+ fsl_readl(host->ioaddr + ESDHC_HOST_VERSION));
-+ printk(KERN_INFO "Caps: 0x%08x | Watermark: 0x%08x\n",
-+ fsl_readl(host->ioaddr + ESDHC_CAPABILITIES),
-+ fsl_readl(host->ioaddr + ESDHC_WML));
-+ printk(KERN_INFO "MCF_INTC1_IPRH: 0x%08x | MCF_INTC1_IPRL: 0x%08x\n",
-+ (unsigned int)MCF_INTC1_IPRH,
-+ (unsigned int)MCF_INTC1_IPRL);
-+ printk(KERN_INFO "MCF_INTC1_IMRH: 0x%08x | MCF_INTC1_IMRL: 0x%08x\n",
-+ (unsigned int)MCF_INTC1_IMRH,
-+ (unsigned int)MCF_INTC1_IMRL);
-+ printk(KERN_INFO "MCF_INTC1_INTFRCH: 0x%08x | MCF_INTC1_INTFRCL: 0x%08x\n",
-+ (unsigned int)MCF_INTC1_INTFRCH,
-+ (unsigned int)MCF_INTC1_INTFRCL);
-+ printk(KERN_INFO "MCF_INTC1_INTFRCH: 0x%08x | MCF_INTC1_INTFRCL: 0x%08x\n",
-+ (unsigned int)MCF_INTC1_INTFRCH,
-+ (unsigned int)MCF_INTC1_INTFRCL);
-+ printk(KERN_INFO "MCF_INTC1_ICR63: 0x%08x | MCF_INTC0_ICR36: 0x%08x\n",
-+ (unsigned int)MCF_INTC1_ICR63,
-+ (unsigned int)MCF_INTC0_ICR36);
-+
-+ printk(KERN_INFO "==================================\n");
-+}
-+#else
-+static void esdhc_dumpregs(struct esdhc_host *host)
-+{
-+ do {} while (0);
-+}
-+#endif
-+
-+
-+static unsigned int debug_nodma;
-+static unsigned int debug_forcedma;
-+static unsigned int debug_quirks;
-+
-+#define ESDHC_QUIRK_CLOCK_BEFORE_RESET (1<<0)
-+#define ESDHC_QUIRK_FORCE_DMA (1<<1)
-+#define ESDHC_QUIRK_NO_CARD_NO_RESET (1<<2)
-+#define ESDHC_QUIRK_SINGLE_POWER_WRITE (1<<3)
-+
-+static void esdhc_prepare_data(struct esdhc_host *, struct mmc_data *);
-+static void esdhc_finish_data(struct esdhc_host *);
-+static irqreturn_t esdhc_irq(int irq, void *dev_id);
-+static void esdhc_send_command(struct esdhc_host *, struct mmc_command *);
-+static void esdhc_finish_command(struct esdhc_host *);
-+
-+/*****************************************************************************\
-+ * *
-+ * Low level functions *
-+ * *
-+\*****************************************************************************/
-+
-+static void esdhc_reset(struct esdhc_host *host, u8 mask)
-+{
-+ unsigned long timeout;
-+ unsigned int sysctl;
-+
-+ if (host->chip->quirks & ESDHC_QUIRK_NO_CARD_NO_RESET) {
-+ if (!(fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE) &
-+ ESDHC_CARD_PRESENT))
-+ return;
-+ }
-+
-+ timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
-+ timeout = timeout | (mask << ESDHC_RESET_SHIFT);
-+ fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
-+
-+ if (mask & ESDHC_RESET_ALL) {
-+ host->clock = 0;
-+ host->bus_width = 0;
-+ }
-+
-+ /* Wait max 100 ms */
-+ timeout = 100;
-+
-+ /* hw clears the bit when it's done */
-+ sysctl = (mask << ESDHC_RESET_SHIFT);
-+ while (fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL) & sysctl) {
-+ if (timeout == 0) {
-+ printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
-+ mmc_hostname(host->mmc), (int)mask);
-+ esdhc_dumpregs(host);
-+ return;
-+ }
-+ timeout--;
-+ mdelay(1);
-+ }
-+}
-+
-+static void esdhc_init(struct esdhc_host *host)
-+{
-+ u32 intmask;
-+ /*reset eSDHC chip*/
-+ esdhc_reset(host, ESDHC_RESET_ALL);
-+
-+ intmask = fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE);
-+ intmask = intmask & 0xF7000000;
-+ fsl_writel(host->ioaddr + ESDHC_PRESENT_STATE, intmask);
-+
-+ intmask = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
-+ intmask = intmask | ESDHC_CLOCK_INT_EN | ESDHC_CLOCK_INT_STABLE;
-+ fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, intmask);
-+
-+ intmask = fsl_readl(host->ioaddr + ESDHC_INT_STATUS);
-+ fsl_writel(host->ioaddr + ESDHC_INT_STATUS, intmask);
-+
-+ intmask = fsl_readl(host->ioaddr + ESDHC_INT_ENABLE);
-+
-+ fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, intmask);
-+ fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, intmask);
-+ /* Modelo does not support */
-+ /*MCF_ESDHC_SCR = MCF_ESDHC_SCR | ESDHC_DMA_SNOOP | 0xC0;*/
-+
-+ intmask = fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL);
-+ intmask &= ~ESDHC_CTRL_D3_DETEC;
-+
-+ fsl_writel(host->ioaddr + ESDHC_PROTOCOL_CONTROL, intmask);
-+ DBG(" init %x\n", fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL));
-+}
-+
-+static void reset_regs(struct esdhc_host *host)
-+{
-+ u32 intmask;
-+
-+ intmask = fsl_readl(host->ioaddr + ESDHC_INT_STATUS);
-+ fsl_writel(host->ioaddr + ESDHC_INT_STATUS, intmask);
-+
-+ intmask = ESDHC_INT_DATA_END_BIT | ESDHC_INT_DATA_CRC |
-+ ESDHC_INT_DATA_TIMEOUT | ESDHC_INT_INDEX |
-+ ESDHC_INT_END_BIT | ESDHC_INT_CRC | ESDHC_INT_TIMEOUT |
-+ ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL |
-+ ESDHC_INT_DMA_END | ESDHC_INT_DATA_END | ESDHC_INT_RESPONSE;
-+
-+ fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, intmask);
-+ fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, intmask);
-+
-+ if (host->bus_width == MMC_BUS_WIDTH_4) {
-+ intmask = fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL);
-+ intmask |= ESDHC_CTRL_4BITBUS;
-+ fsl_writel(host->ioaddr + ESDHC_PROTOCOL_CONTROL, intmask);
-+ }
-+}
-+
-+/*****************************************************************************
-+ * *
-+ * Core functions *
-+ * *
-+ *****************************************************************************/
-+/* Return the SG's virtual address */
-+static inline char *esdhc_sg_to_buffer(struct esdhc_host *host)
-+{
-+ DBG("cur_sg %x virt %x\n", host->cur_sg, sg_virt(host->cur_sg));
-+ return sg_virt(host->cur_sg);
-+}
-+
-+static inline int esdhc_next_sg(struct esdhc_host *host)
-+{
-+ /*
-+ * Skip to next SG entry.
-+ */
-+ host->cur_sg = sg_next(host->cur_sg);
-+ host->num_sg--;
-+
-+ /*
-+ * Any entries left?
-+ */
-+ if (host->num_sg > 0) {
-+ host->offset = 0;
-+ host->remain = host->cur_sg->length;
-+ }
-+
-+ DBG("%s: host->remain %x %x\n", __func__, host->remain, host->num_sg);
-+ return host->num_sg;
-+}
-+
-+static void esdhc_read_block_pio(struct esdhc_host *host)
-+{
-+ int blksize, chunk_remain;
-+ u32 data;
-+ char *buffer;
-+ int size;
-+
-+ DBG("PIO reading\n");
-+
-+ /* Delay prevents data read error in big files */
-+ udelay(100);
-+
-+ blksize = host->data->blksz;
-+ chunk_remain = 0;
-+ data = 0;
-+
-+ buffer = esdhc_sg_to_buffer(host) + host->offset;
-+
-+ while (blksize) {
-+ if (chunk_remain == 0) {
-+ data = fsl_readl(host->ioaddr + ESDHC_BUFFER);
-+ chunk_remain = min(blksize, 4);
-+ }
-+
-+ size = min(host->remain, chunk_remain);
-+
-+ chunk_remain -= size;
-+ blksize -= size;
-+ host->offset += size;
-+ host->remain -= size;
-+
-+ while (size) {
-+ *buffer = data & 0xFF;
-+ buffer++;
-+ data >>= 8;
-+ size--;
-+ }
-+
-+ if (host->remain == 0) {
-+ if (esdhc_next_sg(host) == 0) {
-+ BUG_ON(blksize != 0);
-+ return;
-+ }
-+ buffer = esdhc_sg_to_buffer(host);
-+ }
-+ }
-+}
-+
-+static void esdhc_write_block_pio(struct esdhc_host *host)
-+{
-+ int blksize, chunk_remain;
-+ u32 data;
-+ char *buffer;
-+ int bytes, size;
-+
-+ DBG("PIO writing\n");
-+
-+ /* Delay necessary when writing large data blocks to SD card */
-+ udelay(100);
-+
-+ blksize = host->data->blksz;
-+ chunk_remain = 4;
-+ data = 0;
-+
-+ bytes = 0;
-+ buffer = esdhc_sg_to_buffer(host) + host->offset;
-+
-+ while (blksize) {
-+ size = min(host->remain, chunk_remain);
-+
-+ chunk_remain -= size;
-+ blksize -= size;
-+ host->offset += size;
-+ host->remain -= size;
-+
-+ while (size) {
-+ data >>= 8;
-+ data |= (u32)*buffer << 24;
-+ buffer++;
-+ size--;
-+ }
-+
-+ if (chunk_remain == 0) {
-+ fsl_writel(host->ioaddr + ESDHC_BUFFER, data);
-+ chunk_remain = min(blksize, 4);
-+ }
-+
-+ if (host->remain == 0) {
-+ if (esdhc_next_sg(host) == 0) {
-+ BUG_ON(blksize != 0);
-+ return;
-+ }
-+ buffer = esdhc_sg_to_buffer(host);
-+ }
-+ }
-+}
-+
-+static void esdhc_transfer_pio(struct esdhc_host *host)
-+{
-+ u32 mask;
-+
-+ BUG_ON(!host->data);
-+
-+ if (host->num_sg == 0)
-+ return;
-+
-+ if (host->data->flags & MMC_DATA_READ)
-+ mask = ESDHC_DATA_AVAILABLE;
-+ else
-+ mask = ESDHC_SPACE_AVAILABLE;
-+
-+ while (fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE) & mask) {
-+ if (host->data->flags & MMC_DATA_READ)
-+ esdhc_read_block_pio(host);
-+ else
-+ esdhc_write_block_pio(host);
-+
-+ if (host->num_sg == 0)
-+ break;
-+ }
-+
-+ DBG("PIO transfer complete.\n");
-+ /* Delay necessary when writing large data blocks to SD card */
-+ udelay(100);
-+}
-+
-+static void esdhc_prepare_data(struct esdhc_host *host, struct mmc_data *data)
-+{
-+ u8 count;
-+ unsigned blkattr = 0;
-+ unsigned target_timeout, current_timeout;
-+ unsigned int sysctl;
-+
-+ WARN_ON(host->data);
-+
-+ if (data == NULL)
-+ return;
-+
-+ DBG("blksz %04x blks %04x flags %08x",
-+ data->blksz, data->blocks, data->flags);
-+ DBG("tsac %d ms nsac %d clk",
-+ data->timeout_ns / 1000000, data->timeout_clks);
-+
-+ /* Sanity checks */
-+ BUG_ON(data->blksz * data->blocks > 524288);
-+ BUG_ON(data->blksz > host->mmc->max_blk_size);
-+ BUG_ON(data->blocks > 65535);
-+
-+ if (host->clock == 0)
-+ return;
-+
-+ /* timeout in us */
-+ target_timeout = data->timeout_ns / 1000 +
-+ (data->timeout_clks * 1000000) / host->clock;
-+
-+ /*
-+ * Figure out needed cycles.
-+ * We do this in steps in order to fit inside a 32 bit int.
-+ * The first step is the minimum timeout, which will have a
-+ * minimum resolution of 6 bits:
-+ * (1) 2^13*1000 > 2^22,
-+ * (2) host->timeout_clk < 2^16
-+ * =>
-+ * (1) / (2) > 2^6
-+ */
-+ count = 0;
-+ host->timeout_clk = host->clock/1000;
-+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
-+ while (current_timeout < target_timeout) {
-+ count++;
-+ current_timeout <<= 1;
-+ if (count >= 0xF)
-+ break;
-+ }
-+
-+ if (count >= 0xF) {
-+ DBG("%s:Timeout requested is too large!\n",
-+ mmc_hostname(host->mmc));
-+ count = 0xE;
-+ }
-+
-+ if (data->blocks >= 0x50) {
-+ DBG("%s:Blocks %x are too large!\n",
-+ mmc_hostname(host->mmc),
-+ data->blocks);
-+ count = 0xE;
-+ }
-+
-+ if ((data->blocks == 1) && (data->blksz >= 0x200)) {
-+ DBG("%s:Blocksize %x is too large\n",
-+ mmc_hostname(host->mmc),
-+ data->blksz);
-+ count = 0xE;
-+ }
-+ count = 0xE;
-+
-+ sysctl = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
-+ sysctl &= (~ESDHC_TIMEOUT_MASK);
-+ fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL,
-+ sysctl | (count<<ESDHC_TIMEOUT_SHIFT));
-+
-+ /* Data transfer*/
-+ if (host->flags & ESDHC_USE_DMA) {
-+ int sg_count;
-+ unsigned int wml;
-+ unsigned int wml_value;
-+ unsigned int timeout;
-+
-+ /* DMA address eSDHC in Modelo must be 4 bytes aligned */
-+ if ((data->sg->offset & 0x3) == 0)
-+ host->offset = 0;
-+ else
-+ host->offset = 0x4 - (data->sg->offset & 0x3);
-+
-+ sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg,
-+ data->sg_len,
-+ (data->flags & MMC_DATA_READ)
-+ ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-+
-+ BUG_ON(sg_count != 1);
-+ /* The data in SD card is little endian,
-+ the SD controller is big endian */
-+ if ((data->flags & MMC_DATA_WRITE) == MMC_DATA_WRITE) {
-+ unsigned char *buffer = sg_virt(data->sg);
-+ unsigned char *buffer_tx =
-+ (unsigned char *)host->dma_tx_buf;
-+ int i;
-+ /* Each sector is 512 Bytes, write 0x200 sectors */
-+ memset(host->dma_tx_buf, 0, ESDHC_DMA_SIZE);
-+ for (i = 0; i < data->sg->length; i = i + 4) {
-+ *(buffer_tx + i + 3) = *(buffer + i);
-+ *(buffer_tx + i + 2) = *(buffer + i + 1);
-+ *(buffer_tx + i + 1) = *(buffer + i + 2);
-+ *(buffer_tx + i) = *(buffer + i + 3);
-+ }
-+
-+ fsl_writel(host->ioaddr + ESDHC_DMA_ADDRESS,
-+ (unsigned long)host->dma_tx_dmahandle);
-+ } else {
-+ fsl_writel(host->ioaddr + ESDHC_DMA_ADDRESS,
-+ sg_dma_address(data->sg) + host->offset);
-+ }
-+
-+ /* Disable the BRR and BWR interrupt */
-+ timeout = fsl_readl(host->ioaddr + ESDHC_INT_ENABLE);
-+ timeout = timeout & (~(ESDHC_INT_DATA_AVAIL |
-+ ESDHC_INT_SPACE_AVAIL));
-+ fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, timeout);
-+
-+ timeout = fsl_readl(host->ioaddr + ESDHC_SIGNAL_ENABLE);
-+ timeout = timeout & (~(ESDHC_INT_DATA_AVAIL |
-+ ESDHC_INT_SPACE_AVAIL));
-+ fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, timeout);
-+
-+ wml_value = data->blksz / 4;
-+ if (data->flags & MMC_DATA_READ) {
-+ /* Read watermask level, max is 0x10*/
-+ if (wml_value > 0x10)
-+ wml_value = 0x10;
-+ wml = (wml_value & ESDHC_WML_MASK) |
-+ ((0x10 & ESDHC_WML_MASK)
-+ << ESDHC_WML_WRITE_SHIFT);
-+ } else {
-+ if (wml_value > 0x80)
-+ wml_value = 0x80;
-+ wml = (0x10 & ESDHC_WML_MASK) |
-+ (((wml_value) & ESDHC_WML_MASK)
-+ << ESDHC_WML_WRITE_SHIFT);
-+ }
-+
-+ fsl_writel(host->ioaddr + ESDHC_WML, wml);
-+ } else {
-+ unsigned long timeout;
-+
-+ host->cur_sg = data->sg;
-+ host->num_sg = data->sg_len;
-+
-+ host->offset = 0;
-+ host->remain = host->cur_sg->length;
-+
-+ timeout = fsl_readl(host->ioaddr + ESDHC_INT_ENABLE);
-+ timeout = timeout | ESDHC_INT_DATA_AVAIL
-+ | ESDHC_INT_SPACE_AVAIL;
-+ fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, timeout);
-+
-+ timeout = fsl_readl(host->ioaddr + ESDHC_SIGNAL_ENABLE);
-+ timeout = timeout | ESDHC_INT_DATA_AVAIL
-+ | ESDHC_INT_SPACE_AVAIL;
-+ fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, timeout);
-+ }
-+
-+ /* We do not handle DMA boundaries */
-+ blkattr = data->blksz;
-+ blkattr |= (data->blocks << 16);
-+ fsl_writel(host->ioaddr + ESDHC_BLOCK_ATTR, blkattr);
-+ esdhc_dumpregs(host);
-+}
-+
-+static unsigned int esdhc_set_transfer_mode(struct esdhc_host *host,
-+ struct mmc_data *data)
-+{
-+ u32 mode = 0;
-+
-+ WARN_ON(host->data);
-+
-+ if (data == NULL)
-+ return 0;
-+
-+ mode = ESDHC_TRNS_BLK_CNT_EN;
-+ if (data->blocks > 1) {
-+ if (data->flags & MMC_DATA_READ)
-+ mode |= ESDHC_TRNS_MULTI | ESDHC_TRNS_ACMD12;
-+ else
-+ mode |= ESDHC_TRNS_MULTI;
-+ }
-+ if (data->flags & MMC_DATA_READ)
-+ mode |= ESDHC_TRNS_READ;
-+ if (host->flags & ESDHC_USE_DMA)
-+ mode |= ESDHC_TRNS_DMA;
-+
-+ return mode;
-+}
-+
-+static void esdhc_finish_data(struct esdhc_host *host)
-+{
-+ struct mmc_data *data;
-+ u16 blocks;
-+
-+ BUG_ON(!host->data);
-+
-+ data = host->data;
-+ host->data = NULL;
-+
-+ if (host->flags & ESDHC_USE_DMA) {
-+ unsigned char *buffer = sg_virt(data->sg);
-+ unsigned char C0, C1, C2, C3;
-+ int i;
-+ /* Data in SD card is little endian,
-+ SD controller is big endian */
-+
-+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
-+ (data->flags & MMC_DATA_READ)
-+ ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-+ if (((data->flags & MMC_DATA_READ) == MMC_DATA_READ)) {
-+ for (i = 0; i < data->sg->length; i = i + 4) {
-+ C0 = *(buffer + host->offset + i);
-+ C1 = *(buffer + host->offset + i + 1);
-+ C2 = *(buffer + host->offset + i + 2);
-+ C3 = *(buffer + host->offset + i + 3);
-+ *(buffer+i) = C3;
-+ *(buffer+i+1) = C2;
-+ *(buffer+i+2) = C1;
-+ *(buffer+i+3) = C0;
-+ }
-+ }
-+ }
-+ /*
-+ * Controller doesn't count down when in single block mode.
-+ */
-+ if ((data->blocks == 1) && (data->error == MMC_ERR_NONE))
-+ blocks = 0;
-+ else {
-+ blocks = fsl_readl(host->ioaddr + ESDHC_BLOCK_ATTR) >> 16;
-+ blocks = 0;
-+ if (data->flags & MMC_DATA_READ)
-+ data->stop = 0;
-+ }
-+
-+ data->bytes_xfered = data->blksz * (data->blocks - blocks);
-+
-+ if ((data->error == MMC_ERR_NONE) && blocks) {
-+ printk(KERN_ERR"%s: Controller signaled completion even "
-+ "though there were blocks left.\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_FAILED;
-+ }
-+
-+ if ((blocks == 0) && (data->error & MMC_ERR_TIMEOUT)) {
-+ printk(KERN_ERR "Controller transmitted completion even "
-+ "though there was a timeout error.\n");
-+ data->error &= ~MMC_ERR_TIMEOUT;
-+ }
-+
-+ if (data->stop) {
-+ DBG("%s data->stop %x\n", __func__, data->stop);
-+ /*
-+ * The controller needs a reset of internal state machines
-+ * upon error conditions.
-+ */
-+ if (data->error != MMC_ERR_NONE) {
-+ printk("%s: The controller needs a "
-+ "reset of internal state machines\n",
-+ __func__);
-+ esdhc_reset(host, ESDHC_RESET_CMD);
-+ esdhc_reset(host, ESDHC_RESET_DATA);
-+ reset_regs(host);
-+ }
-+
-+ esdhc_send_command(host, data->stop);
-+ } else
-+ tasklet_schedule(&host->finish_tasklet);
-+}
-+
-+static void esdhc_send_command(struct esdhc_host *host, struct mmc_command *cmd)
-+{
-+ unsigned int flags;
-+ u32 mask;
-+ unsigned long timeout;
-+
-+ WARN_ON(host->cmd);
-+
-+ /* Wait max 10 ms */
-+ timeout = 10;
-+
-+ mask = ESDHC_CMD_INHIBIT;
-+ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
-+ mask |= ESDHC_DATA_INHIBIT;
-+
-+ /* We shouldn't wait for data inihibit for stop commands, even
-+ though they might use busy signaling */
-+ if (host->mrq->data && (cmd == host->mrq->data->stop))
-+ mask &= ~ESDHC_DATA_INHIBIT;
-+
-+ while (fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE) & mask) {
-+ if (timeout == 0) {
-+ printk(KERN_ERR "%s: Controller never released "
-+ "inhibit bit(s).\n", mmc_hostname(host->mmc));
-+ esdhc_dumpregs(host);
-+ cmd->error = MMC_ERR_FAILED;
-+ tasklet_schedule(&host->finish_tasklet);
-+ return;
-+ }
-+ timeout--;
-+ mdelay(1);
-+ }
-+
-+ mod_timer(&host->timer, jiffies + 15 * HZ);
-+
-+ host->cmd = cmd;
-+
-+ esdhc_prepare_data(host, cmd->data);
-+
-+ fsl_writel(host->ioaddr + ESDHC_ARGUMENT, cmd->arg);
-+
-+ flags = esdhc_set_transfer_mode(host, cmd->data);
-+
-+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
-+ printk(KERN_ERR "%s: Unsupported response type!\n",
-+ mmc_hostname(host->mmc));
-+ cmd->error = MMC_ERR_INVALID;
-+ tasklet_schedule(&host->finish_tasklet);
-+ return;
-+ }
-+
-+ if (!(cmd->flags & MMC_RSP_PRESENT))
-+ flags |= ESDHC_CMD_RESP_NONE;
-+ else if (cmd->flags & MMC_RSP_136)
-+ flags |= ESDHC_CMD_RESP_LONG;
-+ else if (cmd->flags & MMC_RSP_BUSY)
-+ flags |= ESDHC_CMD_RESP_SHORT_BUSY;
-+ else
-+ flags |= ESDHC_CMD_RESP_SHORT;
-+
-+ if (cmd->flags & MMC_RSP_CRC)
-+ flags |= ESDHC_CMD_CRC_EN;
-+ if (cmd->flags & MMC_RSP_OPCODE)
-+ flags |= ESDHC_CMD_INDEX_EN;
-+ if (cmd->data)
-+ flags |= ESDHC_CMD_DATA;
-+
-+ fsl_writel(host->ioaddr + ESDHC_COMMAND,
-+ ESDHC_MAKE_CMD(cmd->opcode, flags));
-+}
-+
-+static void esdhc_finish_command(struct esdhc_host *host)
-+{
-+ int i;
-+
-+ BUG_ON(host->cmd == NULL);
-+
-+ if (host->cmd->flags & MMC_RSP_PRESENT) {
-+ if (host->cmd->flags & MMC_RSP_136) {
-+ /* CRC is stripped so we need to do some shifting. */
-+ for (i = 0; i < 4; i++) {
-+ host->cmd->resp[i] = fsl_readl(host->ioaddr +
-+ ESDHC_RESPONSE + (3-i)*4) << 8;
-+ if (i != 3)
-+ host->cmd->resp[i] |=
-+ (fsl_readl(host->ioaddr
-+ + ESDHC_RESPONSE
-+ + (2-i)*4) >> 24);
-+ }
-+ } else
-+ host->cmd->resp[0] = fsl_readl(host->ioaddr +
-+ ESDHC_RESPONSE);
-+ }
-+
-+ host->cmd->error = MMC_ERR_NONE;
-+
-+ if (host->cmd->data)
-+ host->data = host->cmd->data;
-+ else
-+ tasklet_schedule(&host->finish_tasklet);
-+
-+ host->cmd = NULL;
-+}
-+
-+#define MYCLOCK 1
-+static void esdhc_set_clock(struct esdhc_host *host, unsigned int clock)
-+{
-+#if MYCLOCK
-+ unsigned long sdrefclk, vco, bestmatch = -1, temp, diff;
-+ int dvs, sdclkfs, outdiv;
-+ int best_dvs, best_sdclkfs, best_outdiv;
-+#else
-+ int div, pre_div;
-+ unsigned long sys_busclock = SYS_BUSCLOCK;
-+#endif
-+ unsigned long timeout;
-+ u16 clk;
-+
-+ DBG("esdhc_set_clock %x\n", clock);
-+ if (clock == host->clock)
-+ return;
-+
-+ timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
-+ timeout = timeout & (~ESDHC_CLOCK_MASK);
-+ fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
-+
-+ if (clock == 0)
-+ goto out;
-+
-+#if MYCLOCK
-+ /* TC: The VCO must obtain from u-boot */
-+ /*
-+ * First set the outdiv3 to min 1, then walk through all to
-+ * get closer value with SDCLKDIV and DIV combination
-+ */
-+ vco = 500000000;
-+ MCF_CLOCK_PLL_DR &= 0xFFFF83FF; /* Disable SD Clock */
-+
-+ for (outdiv = 2; outdiv <= 32; outdiv++) {
-+ sdrefclk = vco / outdiv;
-+
-+ for (sdclkfs = 2; sdclkfs < 257; sdclkfs <<= 1) {
-+ for (dvs = 1; dvs < 17; dvs++) {
-+ temp = sdrefclk / (sdclkfs * dvs);
-+
-+ if (temp > clock)
-+ diff = temp - clock;
-+ else
-+ diff = clock - temp;
-+
-+ if (diff <= bestmatch) {
-+ bestmatch = diff;
-+ best_outdiv = outdiv;
-+ best_sdclkfs = sdclkfs;
-+ best_dvs = dvs;
-+
-+ if (bestmatch == 0)
-+ goto end;
-+ }
-+ }
-+ }
-+ }
-+
-+end:
-+#ifdef CONFIG_M5441X
-+ best_outdiv = 3;
-+ best_sdclkfs = 2;
-+ best_dvs = 5;
-+#endif
-+ MCF_CLOCK_PLL_DR |= ((best_outdiv - 1) << 10);
-+ clk = ((best_sdclkfs >> 1) << 8) | ((best_dvs - 1) << 4);
-+#else
-+
-+ if (sys_busclock / 16 > clock) {
-+ for (pre_div = 1; pre_div < 256; pre_div *= 2) {
-+ if ((sys_busclock / pre_div) < (clock*16))
-+ break;
-+ }
-+ } else
-+ pre_div = 1;
-+
-+ for (div = 1; div <= 16; div++) {
-+ if ((sys_busclock / (div*pre_div)) <= clock)
-+ break;
-+ }
-+
-+ pre_div >>= 1;
-+ div -= 1;
-+
-+ clk = (div << ESDHC_DIVIDER_SHIFT) | (pre_div << ESDHC_PREDIV_SHIFT);
-+#endif
-+
-+ timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
-+ timeout = timeout | clk;
-+
-+ fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
-+
-+ /* Wait max 10 ms */
-+ timeout = 10;
-+ while (timeout) {
-+ timeout--;
-+ mdelay(1);
-+ }
-+
-+ timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
-+ timeout = timeout | ESDHC_CLOCK_CARD_EN;
-+ fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
-+
-+ esdhc_dumpregs(host);
-+
-+out:
-+ host->clock = clock;
-+ if (host->clock == 0) {
-+ timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
-+ timeout = timeout | ESDHC_CLOCK_DEFAULT;
-+ fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
-+ }
-+}
-+
-+static void esdhc_set_power(struct esdhc_host *host, unsigned short power)
-+{
-+ if (host->power == power)
-+ return;
-+
-+ if (power == (unsigned short)-1)
-+ host->power = power;
-+}
-+
-+/*****************************************************************************\
-+ * *
-+ * MMC callbacks *
-+ * *
-+\*****************************************************************************/
-+
-+static void esdhc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct esdhc_host *host;
-+ unsigned long flags;
-+
-+ DBG("esdhc_request\n");
-+ host = mmc_priv(mmc);
-+
-+ spin_lock_irqsave(&host->lock, flags);
-+
-+ WARN_ON(host->mrq != NULL);
-+
-+ host->mrq = mrq;
-+
-+ esdhc_send_command(host, mrq->cmd);
-+
-+ mmiowb();
-+ spin_unlock_irqrestore(&host->lock, flags);
-+}
-+
-+static void esdhc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct esdhc_host *host;
-+ unsigned long flags;
-+ u32 ctrl, irq_status_ena, irq_signal_ena;
-+
-+ DBG("ios->power_mode %x, ios->bus_width %x\n",
-+ ios->power_mode, ios->bus_width);
-+ host = mmc_priv(mmc);
-+
-+ spin_lock_irqsave(&host->lock, flags);
-+
-+ /*
-+ * Reset the chip on each power off.
-+ * Should clear out any weird states.
-+ */
-+
-+ if (ios->power_mode == MMC_POWER_OFF) {
-+ fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, 0);
-+ esdhc_init(host);
-+ }
-+
-+ esdhc_set_clock(host, ios->clock);
-+
-+ if (ios->power_mode == MMC_POWER_OFF)
-+ esdhc_set_power(host, -1);
-+ else
-+ esdhc_set_power(host, ios->vdd);
-+
-+ ctrl = fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL);
-+
-+ if (ios->bus_width == MMC_BUS_WIDTH_4) {
-+ ctrl |= ESDHC_CTRL_4BITBUS;
-+ host->bus_width = MMC_BUS_WIDTH_4;
-+
-+ ctrl &= ~ESDHC_CTRL_D3_DETEC;
-+
-+ /*when change the config of the CD,
-+ * will involve card remove interrupt
-+ * So try disable the card remove interrupt.
-+ */
-+ irq_status_ena = fsl_readl(host->ioaddr + ESDHC_INT_ENABLE);
-+ irq_status_ena &= ~ESDHC_INT_CARD_REMOVE;
-+ fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, irq_status_ena);
-+
-+ irq_signal_ena = fsl_readl(host->ioaddr + ESDHC_SIGNAL_ENABLE);
-+ irq_signal_ena &= ~ESDHC_INT_CARD_REMOVE;
-+ fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, irq_signal_ena);
-+
-+ DBG("host->card_insert = 0x%x\n", host->card_insert);
-+
-+
-+ } else {
-+ ctrl &= ~ESDHC_CTRL_4BITBUS;
-+ host->bus_width = MMC_BUS_WIDTH_1;
-+ }
-+
-+ fsl_writel(host->ioaddr + ESDHC_PROTOCOL_CONTROL, ctrl);
-+ mmiowb();
-+ spin_unlock_irqrestore(&host->lock, flags);
-+
-+ esdhc_dumpregs(host);
-+}
-+
-+static int esdhc_get_ro(struct mmc_host *mmc)
-+{
-+ return 0;
-+}
-+
-+static const struct mmc_host_ops esdhc_ops = {
-+ .request = esdhc_request,
-+ .set_ios = esdhc_set_ios,
-+ .get_ro = esdhc_get_ro,
-+};
-+
-+/*****************************************************************************\
-+ * *
-+ * Tasklets *
-+ * *
-+\*****************************************************************************/
-+
-+static void esdhc_tasklet_card(unsigned long param)
-+{
-+ struct esdhc_host *host;
-+
-+ host = (struct esdhc_host *)param;
-+
-+ spin_lock(&host->lock);
-+
-+ DBG("esdhc_tasklet_card\n");
-+ if (!(fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE) &
-+ ESDHC_CARD_PRESENT)) {
-+ if (host->mrq) {
-+ printk(KERN_ERR "%s: Card removed during transfer!\n",
-+ mmc_hostname(host->mmc));
-+ printk(KERN_ERR "%s: Resetting controller.\n",
-+ mmc_hostname(host->mmc));
-+
-+ esdhc_reset(host, ESDHC_RESET_CMD);
-+ esdhc_reset(host, ESDHC_RESET_DATA);
-+
-+ host->mrq->cmd->error = MMC_ERR_FAILED;
-+ tasklet_schedule(&host->finish_tasklet);
-+ }
-+ host->card_insert = 0;
-+ } else {
-+ esdhc_reset(host, ESDHC_INIT_CARD);
-+ host->card_insert = 1;
-+ }
-+
-+ spin_unlock(&host->lock);
-+
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(500));
-+}
-+
-+static void esdhc_tasklet_finish(unsigned long param)
-+{
-+ struct esdhc_host *host;
-+ unsigned long flags;
-+ struct mmc_request *mrq;
-+
-+ host = (struct esdhc_host *)param;
-+ DBG("esdhc_tasklet_finish\n");
-+
-+ spin_lock_irqsave(&host->lock, flags);
-+
-+ del_timer(&host->timer);
-+
-+ mrq = host->mrq;
-+
-+ /*
-+ * The controller needs a reset of internal state machines
-+ * upon error conditions.
-+ */
-+ if ((mrq->cmd->error != MMC_ERR_NONE) ||
-+ (mrq->data && ((mrq->data->error != MMC_ERR_NONE) ||
-+ (mrq->data->stop &&
-+ (mrq->data->stop->error != MMC_ERR_NONE))))) {
-+
-+ /* Some controllers need this kick or reset won't work here */
-+ if (host->chip->quirks & ESDHC_QUIRK_CLOCK_BEFORE_RESET) {
-+ unsigned int clock;
-+
-+ /* This is to force an update */
-+ clock = host->clock;
-+ host->clock = 0;
-+ esdhc_set_clock(host, clock);
-+ }
-+
-+ if (mrq->cmd->error != MMC_ERR_TIMEOUT) {
-+ esdhc_reset(host, ESDHC_RESET_CMD);
-+ esdhc_reset(host, ESDHC_RESET_DATA);
-+ reset_regs(host);
-+ esdhc_dumpregs(host);
-+ }
-+ }
-+
-+ host->mrq = NULL;
-+ host->cmd = NULL;
-+ host->data = NULL;
-+
-+ spin_unlock_irqrestore(&host->lock, flags);
-+
-+ mmc_request_done(host->mmc, mrq);
-+}
-+
-+static void esdhc_timeout_timer(unsigned long data)
-+{
-+ struct esdhc_host *host;
-+ unsigned long flags;
-+
-+ host = (struct esdhc_host *)data;
-+ printk(KERN_INFO "esdhc_timeout_timer\n");
-+ spin_lock_irqsave(&host->lock, flags);
-+
-+ if (host->mrq) {
-+ if (host->data) {
-+ host->data->error = MMC_ERR_TIMEOUT;
-+ esdhc_finish_data(host);
-+ } else {
-+ if (host->cmd)
-+ host->cmd->error = MMC_ERR_TIMEOUT;
-+ else
-+ host->mrq->cmd->error = MMC_ERR_TIMEOUT;
-+ tasklet_schedule(&host->finish_tasklet);
-+ }
-+ }
-+
-+ mmiowb();
-+ fsl_writel(host->ioaddr + ESDHC_INT_STATUS, 0);
-+ spin_unlock_irqrestore(&host->lock, flags);
-+}
-+
-+/*****************************************************************************\
-+ * *
-+ * Interrupt handling *
-+ * *
-+\*****************************************************************************/
-+
-+static void esdhc_cmd_irq(struct esdhc_host *host, u32 intmask)
-+{
-+ BUG_ON(intmask == 0);
-+
-+ if (!host->cmd) {
-+ printk(KERN_ERR "%s: Got command interrupt even though no "
-+ "command operation was in progress.\n",
-+ mmc_hostname(host->mmc));
-+ esdhc_dumpregs(host);
-+ return;
-+ }
-+
-+ if (intmask & ESDHC_INT_TIMEOUT) {
-+ host->cmd->error = MMC_ERR_TIMEOUT;
-+ DBG("esdhc_cmd_irq MMC_ERR_TIMEOUT\n");
-+ tasklet_schedule(&host->finish_tasklet);
-+ } else if (intmask & ESDHC_INT_RESPONSE)
-+ esdhc_finish_command(host);
-+ else {
-+ if (intmask & ESDHC_INT_CRC)
-+ host->cmd->error = MMC_ERR_BADCRC;
-+ else if (intmask & (ESDHC_INT_END_BIT | ESDHC_INT_INDEX))
-+ host->cmd->error = MMC_ERR_FAILED;
-+ else
-+ host->cmd->error = MMC_ERR_INVALID;
-+
-+ tasklet_schedule(&host->finish_tasklet);
-+ }
-+}
-+
-+static void esdhc_data_irq(struct esdhc_host *host, u32 intmask)
-+{
-+ BUG_ON(intmask == 0);
-+ if (!host->data) {
-+ /*
-+ * A data end interrupt is sent together with the response
-+ * for the stop command.
-+ */
-+ if ((intmask & ESDHC_INT_DATA_END) ||
-+ (intmask & ESDHC_INT_DMA_END)) {
-+ return;
-+ }
-+ DBG("%s: Got data interrupt even though no "
-+ "data operation was in progress.\n",
-+ mmc_hostname(host->mmc));
-+ esdhc_dumpregs(host);
-+
-+ return;
-+ }
-+
-+ if (intmask & ESDHC_INT_DATA_TIMEOUT)
-+ host->data->error = MMC_ERR_TIMEOUT;
-+ else if (intmask & ESDHC_INT_DATA_CRC)
-+ host->data->error = MMC_ERR_BADCRC;
-+ else if (intmask & ESDHC_INT_DATA_END_BIT)
-+ host->data->error = MMC_ERR_FAILED;
-+
-+ if (host->data->error != MMC_ERR_NONE) {
-+ esdhc_finish_data(host);
-+ } else {
-+ if (intmask & (ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL))
-+ esdhc_transfer_pio(host);
-+ /*
-+ * We currently don't do anything fancy with DMA
-+ * boundaries, but as we can't disable the feature
-+ * we need to at least restart the transfer.
-+ */
-+ if (intmask & ESDHC_INT_DMA_END)
-+ fsl_writel(host->ioaddr + ESDHC_DMA_ADDRESS,
-+ fsl_readl(host->ioaddr + ESDHC_DMA_ADDRESS));
-+ if (intmask & ESDHC_INT_DATA_END)
-+ esdhc_finish_data(host);
-+ }
-+}
-+
-+static irqreturn_t esdhc_detect_irq(int irq, void *dev_id)
-+{
-+ irqreturn_t result;
-+ struct esdhc_host *host = dev_id;
-+ u8 irq_status = 0;
-+
-+ spin_lock(&host->lock);
-+
-+ irq_status = MCF_EPORT_EPPDR & 0x2;
-+ DBG("***Extern IRQ %x %x %x %x %x %x\n", MCF_EPORT_EPPAR,
-+ MCF_EPORT_EPDDR, MCF_EPORT_EPDR, MCF_EPORT_EPFR,
-+ MCF_EPORT_EPIER, MCF_EPORT_EPPDR);
-+#if defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1)
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE1);
-+#elif defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ7)
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE7);
-+#else
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE7);
-+#endif
-+ if (irq_status == 0x0) {
-+ DBG("*** Card insert interrupt Extern IRQ\n");
-+ esdhc_reset(host, ESDHC_INIT_CARD);
-+ host->card_insert = 1;
-+ } else /*irq_status == 0x2) */{
-+ DBG("*** Card removed interrupt Extern IRQ\n");
-+ if (host->mrq) {
-+ printk(KERN_ERR "%s: Card removed during transfer!\n",
-+ mmc_hostname(host->mmc));
-+ printk(KERN_ERR "%s: Resetting controller.\n",
-+ mmc_hostname(host->mmc));
-+
-+ esdhc_reset(host, ESDHC_RESET_CMD);
-+ esdhc_reset(host, ESDHC_RESET_DATA);
-+
-+ host->mrq->cmd->error = MMC_ERR_FAILED;
-+ tasklet_schedule(&host->finish_tasklet);
-+ }
-+ host->card_insert = 0;
-+ }
-+
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(500));
-+#if defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1)
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA1_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE1;
-+ MCF_EPORT_EPFR = MCF_EPORT_EPFR | MCF_EPORT_EPFR_EPF1;
-+#elif defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ7)
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+ MCF_EPORT_EPFR = MCF_EPORT_EPFR | MCF_EPORT_EPFR_EPF7;
-+#else
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+ MCF_EPORT_EPFR = MCF_EPORT_EPFR | MCF_EPORT_EPFR_EPF7;
-+#endif
-+ DBG("***Extern IRQ return %x %x %x %x %x %x\n", MCF_EPORT_EPPAR,
-+ MCF_EPORT_EPDDR, MCF_EPORT_EPDR, MCF_EPORT_EPFR,
-+ MCF_EPORT_EPIER, MCF_EPORT_EPPDR);
-+
-+ result = IRQ_HANDLED;
-+ spin_unlock(&host->lock);
-+
-+ return result;
-+}
-+
-+static irqreturn_t esdhc_irq(int irq, void *dev_id)
-+{
-+ irqreturn_t result;
-+ struct esdhc_host *host = dev_id;
-+ u32 status;
-+
-+ spin_lock(&host->lock);
-+
-+ status = fsl_readl(host->ioaddr + ESDHC_INT_STATUS);
-+
-+ if (!status || status == 0xffffffff) {
-+ result = IRQ_NONE;
-+ goto out;
-+ }
-+
-+ if (status & ESDHC_INT_CMD_MASK) {
-+ fsl_writel(host->ioaddr + ESDHC_INT_STATUS,
-+ status & ESDHC_INT_CMD_MASK);
-+ esdhc_cmd_irq(host, status & ESDHC_INT_CMD_MASK);
-+ }
-+
-+ if (status & ESDHC_INT_DATA_MASK) {
-+ fsl_writel(host->ioaddr + ESDHC_INT_STATUS,
-+ status & ESDHC_INT_DATA_MASK);
-+ esdhc_data_irq(host, status & ESDHC_INT_DATA_MASK);
-+ }
-+
-+ status &= ~(ESDHC_INT_CMD_MASK | ESDHC_INT_DATA_MASK);
-+
-+ if (status) {
-+ printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
-+ mmc_hostname(host->mmc), status);
-+ esdhc_dumpregs(host);
-+
-+ fsl_writel(host->ioaddr + ESDHC_INT_STATUS, status);
-+ }
-+
-+ result = IRQ_HANDLED;
-+
-+ mmiowb();
-+out:
-+ spin_unlock(&host->lock);
-+
-+ return result;
-+}
-+
-+/*****************************************************************************\
-+ * *
-+ * Suspend/resume *
-+ * *
-+\*****************************************************************************/
-+
-+#ifdef CONFIG_PM
-+
-+static int esdhc_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct esdhc_chip *chip;
-+ int i, ret;
-+
-+ chip = platform_get_drvdata(pdev);
-+ if (!chip)
-+ return 0;
-+
-+ DBG("Suspending...");
-+
-+ for (i = 0; i < chip->num_slots; i++) {
-+ if (!chip->hosts[i])
-+ continue;
-+ ret = mmc_suspend_host(chip->hosts[i]->mmc);
-+ if (ret) {
-+ for (i--; i >= 0; i--)
-+ mmc_resume_host(chip->hosts[i]->mmc);
-+ return ret;
-+ }
-+ }
-+
-+ for (i = 0; i < chip->num_slots; i++) {
-+ if (!chip->hosts[i])
-+ continue;
-+ free_irq(chip->hosts[i]->irq, chip->hosts[i]);
-+ }
-+
-+ return 0;
-+}
-+
-+static int esdhc_resume(struct platform_device *pdev)
-+{
-+ struct esdhc_chip *chip;
-+ int i, ret;
-+
-+ chip = platform_get_drvdata(pdev);
-+ if (!chip)
-+ return 0;
-+
-+ DBG("Resuming...");
-+
-+ for (i = 0; i < chip->num_slots; i++) {
-+ if (!chip->hosts[i])
-+ continue;
-+ ret = request_irq(chip->hosts[i]->irq, esdhc_irq,
-+ IRQF_SHARED, chip->hosts[i]->slot_descr,
-+ chip->hosts[i]);
-+ if (ret)
-+ return ret;
-+ esdhc_init(chip->hosts[i]);
-+ mmiowb();
-+ ret = mmc_resume_host(chip->hosts[i]->mmc);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+#else
-+
-+#define esdhc_suspend NULL
-+#define esdhc_resume NULL
-+
-+#endif
-+
-+/*****************************************************************************\
-+ * *
-+ * Device probing/removal *
-+ * *
-+\*****************************************************************************/
-+
-+static int esdhc_probe_slot(struct platform_device *pdev, int slot)
-+{
-+ int ret;
-+ unsigned int version;
-+ struct esdhc_chip *chip;
-+ struct mmc_host *mmc;
-+ struct esdhc_host *host;
-+ struct resource *res;
-+
-+ unsigned int caps;
-+
-+ chip = platform_get_drvdata(pdev);
-+ BUG_ON(!chip);
-+
-+ mmc = mmc_alloc_host(sizeof(struct esdhc_host), &(pdev->dev));
-+ if (!mmc) {
-+ printk(KERN_ERR "%s mmc_alloc_host failed %x\n",
-+ __func__, (unsigned int)mmc);
-+ return -ENOMEM;
-+ }
-+
-+ host = mmc_priv(mmc);
-+ host->mmc = mmc;
-+
-+ host->chip = chip;
-+ chip->hosts[slot] = host;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (res == NULL) {
-+ printk(KERN_ERR "%s platform_get_resource MEM failed %x\n",
-+ __func__, (unsigned int)res);
-+ goto free;
-+ }
-+
-+ host->addr = res->start;
-+ host->size = res->end - res->start + 1;
-+
-+ host->irq = platform_get_irq(pdev, 0);
-+ if (host->irq <= 0) {
-+ printk(KERN_ERR "%s platform_get_irq failed %x\n",
-+ __func__, host->irq);
-+ goto free;
-+ }
-+
-+ printk(KERN_INFO "slot %d at 0x%08lx, irq %d\n",
-+ slot, host->addr, host->irq);
-+
-+ snprintf(host->slot_descr, 20, "esdhc:slot%d", slot);
-+
-+ ret = (int)request_mem_region(host->addr, host->size, DRIVER_NAME);
-+ if (!ret) {
-+ ret = -EBUSY;
-+ printk(KERN_INFO "%s request_mem_region failed %x\n",
-+ __func__, (unsigned int)res);
-+ goto release;
-+ }
-+
-+ host->ioaddr = ioremap_nocache(host->addr, host->size);
-+ if (!host->ioaddr) {
-+ ret = -ENOMEM;
-+ printk(KERN_INFO "%s ioremap_nocache failed %x\n",
-+ __func__, (unsigned int)host->ioaddr);
-+ goto release;
-+ }
-+
-+ esdhc_reset(host, ESDHC_RESET_ALL);
-+
-+ version = fsl_readl(host->ioaddr + ESDHC_HOST_VERSION);
-+ if ((version & 1) != 0x01)
-+ printk(KERN_INFO "%s: Unknown controller version (%d). "
-+ "You may experience problems.\n", host->slot_descr,
-+ version);
-+
-+ caps = fsl_readl(host->ioaddr + ESDHC_CAPABILITIES);
-+ printk(KERN_INFO "%s caps %x %x\n",
-+ __func__, caps, (unsigned int)MCF_ESDHC_HOSTCAPBLT);
-+
-+#if defined(CONFIG_ESDHC_FORCE_PIO)
-+ debug_nodma = 1;
-+#endif
-+ if (debug_nodma)
-+ DBG("DMA forced off\n");
-+ else if (debug_forcedma) {
-+ DBG("DMA forced on\n");
-+ host->flags |= ESDHC_USE_DMA;
-+ } else if (chip->quirks & ESDHC_QUIRK_FORCE_DMA) {
-+ DBG("Controller force DMA capability\n");
-+ host->flags |= ESDHC_USE_DMA;
-+ } else if (!(caps & ESDHC_CAN_DO_DMA))
-+ DBG("Controller doesn't have DMA capability\n");
-+ else {
-+ host->flags |= ESDHC_USE_DMA;
-+ DBG("Controller have DMA capability\n");
-+ }
-+
-+ /*
-+ * Set host parameters.
-+ */
-+#ifdef CONFIG_MPC5441X
-+ host->max_clk = 17000000;
-+#else
-+ host->max_clk = 25000000;
-+#endif
-+
-+ /* if 4 bit , freq can be 50MHz */
-+ mmc->ops = &esdhc_ops;
-+ mmc->f_min = 400000;
-+ mmc->f_max = min((int)host->max_clk, 50000000);
-+
-+ mmc->caps = MMC_CAP_4_BIT_DATA;
-+
-+ mmc->ocr_avail = 0;
-+ if (caps & ESDHC_CAN_VDD_330)
-+ mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
-+ if (caps & ESDHC_CAN_VDD_300)
-+ mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
-+ if (caps & ESDHC_CAN_VDD_180)
-+ mmc->ocr_avail |= MMC_VDD_165_195;
-+
-+ if (mmc->ocr_avail == 0) {
-+ printk(KERN_INFO "%s: Hardware doesn't report any "
-+ "support voltages.\n", host->slot_descr);
-+ ret = -ENODEV;
-+ goto unmap;
-+ }
-+
-+ spin_lock_init(&host->lock);
-+
-+ /*
-+ * Maximum number of segments. Hardware cannot do scatter lists.
-+ */
-+ if (host->flags & ESDHC_USE_DMA)
-+ mmc->max_segs = 1;
-+ else
-+ mmc->max_segs = 16;
-+
-+ /*
-+ * Maximum number of sectors in one transfer. Limited by DMA boundary
-+ * size (512KiB).
-+ */
-+ mmc->max_req_size = 524288;
-+
-+ /*
-+ * Maximum segment size. Could be one segment with the maximum number
-+ * of bytes.
-+ */
-+ mmc->max_seg_size = mmc->max_req_size;
-+
-+ /*
-+ * Maximum block size. This varies from controller to controller and
-+ * is specified in the capabilities register.
-+ */
-+ mmc->max_blk_size = (caps & ESDHC_MAX_BLOCK_MASK) >>
-+ ESDHC_MAX_BLOCK_SHIFT;
-+ if (mmc->max_blk_size > 3) {
-+ printk(KERN_INFO "%s: Invalid maximum block size.\n",
-+ host->slot_descr);
-+ ret = -ENODEV;
-+ goto unmap;
-+ }
-+ mmc->max_blk_size = 512 << mmc->max_blk_size;
-+
-+ /*
-+ * Maximum block count.
-+ */
-+ mmc->max_blk_count = /*65535*/0x80;
-+
-+ /*
-+ * Init tasklets.
-+ */
-+ tasklet_init(&host->card_tasklet,
-+ esdhc_tasklet_card, (unsigned long)host);
-+ tasklet_init(&host->finish_tasklet,
-+ esdhc_tasklet_finish, (unsigned long)host);
-+
-+ setup_timer(&host->timer, esdhc_timeout_timer, (unsigned long)host);
-+
-+ esdhc_init(host);
-+
-+ esdhc_dumpregs(host);
-+
-+ ret = request_irq(host->irq, esdhc_irq, IRQF_DISABLED,
-+ host->slot_descr, host);
-+ if (ret) {
-+ printk(KERN_INFO "%s: request irq fail %x\n", __func__, ret);
-+ goto untasklet;
-+ }
-+
-+ ret = request_irq(card_detect_extern_irq,
-+ esdhc_detect_irq, IRQF_DISABLED,
-+ host->slot_descr, host);
-+ if (ret) {
-+ printk(KERN_INFO "%s: request irq fail %x\n", __func__, ret);
-+ goto untasklet1;
-+ }
-+
-+ mmiowb();
-+
-+ ret = mmc_add_host(mmc);
-+ if (ret) {
-+ printk(KERN_INFO "%s: mmc_add_host fail %x\n", __func__, ret);
-+ goto unaddhost;
-+ }
-+
-+ printk(KERN_INFO "%s: ESDHC at 0x%08lx irq %d %s\n", mmc_hostname(mmc),
-+ host->addr, host->irq,
-+ (host->flags & ESDHC_USE_DMA) ? "DMA" : "PIO");
-+
-+#ifdef ESDHC_DMA_KMALLOC
-+ host->dma_tx_buf = kmalloc(ESDHC_DMA_SIZE, GFP_DMA);
-+ host->dma_tx_dmahandle = virt_to_phys(host->dma_tx_buf);
-+#else
-+ host->dma_tx_buf = dma_alloc_coherent(NULL, ESDHC_DMA_SIZE,
-+ &host->dma_tx_dmahandle, GFP_DMA|GFP_KERNEL);
-+#endif
-+
-+ if (((unsigned int)host->dma_tx_buf == 0) ||
-+ ((unsigned int)host->dma_tx_dmahandle == 0))
-+ printk(KERN_ERR "%s DMA alloc error\n", __func__);
-+
-+ return 0;
-+
-+unaddhost:
-+ free_irq(card_detect_extern_irq, host);
-+untasklet1:
-+ free_irq(host->irq, host);
-+untasklet:
-+ tasklet_kill(&host->card_tasklet);
-+ tasklet_kill(&host->finish_tasklet);
-+unmap:
-+ iounmap(host->ioaddr);
-+release:
-+ release_mem_region(host->addr, host->size);
-+free:
-+ mmc_free_host(mmc);
-+
-+ return ret;
-+}
-+
-+static void esdhc_remove_slot(struct platform_device *pdev, int slot)
-+{
-+ struct esdhc_chip *chip;
-+ struct mmc_host *mmc;
-+ struct esdhc_host *host;
-+
-+ chip = platform_get_drvdata(pdev);
-+ host = chip->hosts[slot];
-+ mmc = host->mmc;
-+
-+ chip->hosts[slot] = NULL;
-+
-+ mmc_remove_host(mmc);
-+
-+ esdhc_reset(host, ESDHC_RESET_ALL);
-+
-+ free_irq(card_detect_extern_irq, host);
-+
-+ free_irq(host->irq, host);
-+
-+ del_timer_sync(&host->timer);
-+
-+ tasklet_kill(&host->card_tasklet);
-+ tasklet_kill(&host->finish_tasklet);
-+
-+ iounmap(host->ioaddr);
-+
-+ release_mem_region(host->addr, host->size);
-+
-+ mmc_free_host(mmc);
-+ DBG("%s: Exit....\n", __func__);
-+}
-+
-+static int __init esdhc_probe(struct platform_device *pdev)
-+{
-+ int ret, i;
-+ u8 slots;
-+ struct esdhc_chip *chip;
-+
-+ BUG_ON(pdev == NULL);
-+
-+ /* Slew Rate */
-+ MCF_GPIO_SRCR_SDHC = 3;
-+ MCF_GPIO_SRCR_IRQ0 = 3;
-+
-+ /* Port Configuration */
-+ MCF_GPIO_PAR_ESDHCH = 0xFF; /* DAT[3:0] */
-+ MCF_GPIO_PAR_ESDHCL = 0x0F; /* CMD, CLK */
-+
-+ MCF_ESDHC_VSR = 2; /* disabled adma and set 3.0V */
-+
-+ MCF_INTC2_ICR31 = 2; /* SDHC irqstat */
-+#if defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1)
-+ /*this is irq1 hardware work round*/
-+ MCF_GPIO_PAR_IRQ0H |= 0x3;
-+
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA1_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE1;
-+
-+ MCF_INTC0_ICR1 = 7; /* IRQ1 */
-+ DBG("MCF_INTC0_ICR1 %x MCF_EPORT_EPPAR %x "
-+ "MCF_EPORT_EPFR %x MCF_EPORT_EPIER %x "
-+ "MCF_INTC0_IMRL %x MCF_INTC0_INTFRCL %x "
-+ "MCF_INTC0_IPRL %x\n",
-+ MCF_INTC0_ICR1, MCF_EPORT_EPPAR, MCF_EPORT_EPFR,
-+ MCF_EPORT_EPIER, MCF_INTC0_IMRL, MCF_INTC0_INTFRCL,
-+ MCF_INTC0_IPRL);
-+#elif defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ7)
-+ MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ7;
-+
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+
-+ MCF_INTC0_ICR7 = 2; /* IRQ7 */
-+ DBG("MCF_INTC0_ICR7 %x MCF_EPORT_EPPAR %x\n",
-+ MCF_INTC0_ICR7, MCF_EPORT_EPPAR);
-+#else
-+ MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ7;
-+
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+
-+ MCF_INTC0_ICR7 = 2; /* IRQ7 */
-+ DBG("MCF_INTC0_ICR1 %x MCF_EPORT_EPPAR %x\n",
-+ MCF_INTC0_ICR7, MCF_EPORT_EPPAR);
-+#endif
-+
-+ slots = ESDHC_SLOTS_NUMBER;
-+ DBG("found %d slot(s)\n", slots);
-+ if (slots == 0) {
-+ printk(KERN_INFO "%s: slot err %d\n", __func__, slots);
-+ return -ENODEV;
-+ }
-+
-+ chip = kmalloc(sizeof(struct esdhc_chip) +
-+ sizeof(struct esdhc_host *) * slots, GFP_KERNEL);
-+ if (!chip) {
-+ ret = -ENOMEM;
-+ printk(KERN_ERR "%s: kmalloc fail %x\n", __func__,
-+ (unsigned int)chip);
-+ goto err;
-+ }
-+
-+ memset(chip, 0,
-+ sizeof(struct esdhc_chip) +
-+ sizeof(struct esdhc_host *) * slots);
-+
-+ chip->pdev = pdev;
-+ chip->quirks = ESDHC_QUIRK_NO_CARD_NO_RESET;
-+
-+ if (debug_quirks)
-+ chip->quirks = debug_quirks;
-+
-+ chip->num_slots = slots;
-+ platform_set_drvdata(pdev, chip);
-+
-+ for (i = 0; i < slots; i++) {
-+ ret = esdhc_probe_slot(pdev, i);
-+ if (ret) {
-+ for (i--; i >= 0; i--)
-+ esdhc_remove_slot(pdev, i);
-+ goto free;
-+ }
-+ }
-+
-+ return 0;
-+
-+free:
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(chip);
-+
-+err:
-+ return ret;
-+}
-+
-+static int esdhc_remove(struct platform_device *pdev)
-+{
-+ int i;
-+ struct esdhc_chip *chip;
-+
-+ chip = platform_get_drvdata(pdev);
-+
-+ if (chip) {
-+ for (i = 0; i < chip->num_slots; i++)
-+ esdhc_remove_slot(pdev, i);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ kfree(chip);
-+ }
-+
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+static struct platform_driver esdhc_driver = {
-+ .probe = esdhc_probe,
-+ .remove = esdhc_remove,
-+ .suspend = esdhc_suspend,
-+ .resume = esdhc_resume,
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+/*****************************************************************************\
-+ * *
-+ * Driver init/exit *
-+ * *
-+\*****************************************************************************/
-+
-+static int __init esdhc_drv_init(void)
-+{
-+ printk(KERN_INFO DRIVER_NAME
-+ ": Freescale Enhanced Secure Digital Host"
-+ " Controller driver\n");
-+
-+ return platform_driver_register(&esdhc_driver);
-+}
-+
-+static void __exit esdhc_drv_exit(void)
-+{
-+ printk(KERN_INFO DRIVER_NAME
-+ ": Freescale Enhanced Secure Digital Host"
-+ " Controller driver exit\n");
-+ platform_driver_unregister(&esdhc_driver);
-+}
-+
-+module_init(esdhc_drv_init);
-+module_exit(esdhc_drv_exit);
-+
-+module_param(debug_nodma, uint, 0444);
-+module_param(debug_forcedma, uint, 0444);
-+module_param(debug_quirks, uint, 0444);
-+
-+MODULE_AUTHOR("Chenghu Wu<b16972@freescale.com>");
-+MODULE_DESCRIPTION("Enhanced Secure Digital Host Controller driver");
-+MODULE_LICENSE("GPL");
-+
-+MODULE_PARM_DESC(debug_nodma, "Forcefully disable DMA transfers.");
-+MODULE_PARM_DESC(debug_forcedma, "Forcefully enable DMA transfers.");
-+MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
---- /dev/null
-+++ b/drivers/mmc/host/esdhc.h
-@@ -0,0 +1,310 @@
-+/*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Chenghu Wu <b16972@freescale.com>
-+ * Xiaobo Xie <X.Xie@freescale.com>
-+ *
-+ * Based on mpc837x/driver/mmc/host/esdhc.c done by Xiaobo Xie
-+ * Ported to Coldfire platform by Chenghu Wu
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or (at
-+ * your option) any later version.
-+ */
-+#ifndef ESDHC_H
-+#define ESDHC_H
-+
-+#define MMC_ERR_NONE 0
-+#define MMC_ERR_TIMEOUT 1
-+#define MMC_ERR_BADCRC 2
-+#define MMC_ERR_FIFO 3
-+#define MMC_ERR_FAILED 4
-+#define MMC_ERR_INVALID 5
-+
-+#define MCF_CLOCK_PLL_DR (*(volatile unsigned long *)(0xFC0C0004))
-+#define MCF_ESDHC_HOSTCAPBLT (*(volatile unsigned long *)(0xFC0CC040))
-+#define MCF_ESDHC_ADMAESR (*(volatile unsigned long *)(0xFC0CC054))
-+#define MCF_ESDHC_ADMASAR (*(volatile unsigned long *)(0xFC0CC058))
-+#define MCF_ESDHC_VSR (*(volatile unsigned long *)(0xFC0CC0C0))
-+#define MCF_ESDHC_HOSTVER (*(volatile unsigned long *)(0xFC0CC0FC))
-+/*
-+ * Controller registers (Big Endian)
-+ */
-+
-+#define MCF_GPIO_PAR_SDHC_DATA3 0x20
-+#define MCF_GPIO_PAR_SDHC_DATA2 0x10
-+#define MCF_GPIO_PAR_SDHC_DATA1 0x08
-+#define MCF_GPIO_PAR_SDHC_DATA0 0x04
-+#define MCF_GPIO_PAR_SDHC_CMD 0x02
-+#define MCF_GPIO_PAR_SDHC_CLK 0x01
-+
-+
-+#define MCF_GPIO_SRCR_SDHC_LOWEST 0x00
-+#define MCF_GPIO_SRCR_SDHC_LOWE 0x01
-+#define MCF_GPIO_SRCR_SDHC_HIGH 0x02
-+#define MCF_GPIO_SRCR_SDHC_HIGHEST 0x03
-+
-+
-+#define MCF_GPIO_PCRL_SDHC_DATA3 0x80
-+#define MCF_GPIO_PCRL_SDHC_DATA2 0x40
-+#define MCF_GPIO_PCRL_SDHC_DATA1 0x20
-+#define MCF_GPIO_PCRL_SDHC_DATA0 0x10
-+#define MCF_GPIO_PCRL_SDHC_CMD 0x08
-+#define MCF_GPIO_PCRL_SDHC_CLK 0x04
-+
-+#define MCF_INT_SDHC 63
-+/* DMA System Address Register */
-+#define ESDHC_DMA_ADDRESS 0x00
-+
-+/* Block Attributes Register */
-+#define ESDHC_BLOCK_ATTR 0x04
-+#define ESDHC_BLOCK_SIZE_MASK 0x00000fff
-+#define ESDHC_BLCOK_CNT_MASK 0xffff0000
-+#define ESDHC_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
-+
-+/* Command Argument */
-+#define ESDHC_ARGUMENT 0x08
-+
-+/* Transfer Type Register */
-+#define ESDHC_COMMAND 0x0C
-+
-+#define ESDHC_TRNS_DMA 0x00000001
-+#define ESDHC_TRNS_BLK_CNT_EN 0x00000002
-+#define ESDHC_TRNS_ACMD12 0x00000004
-+#define ESDHC_TRNS_READ 0x00000010
-+#define ESDHC_TRNS_MULTI 0x00000020
-+
-+#define ESDHC_CMD_RESP_MASK 0x00030000
-+#define ESDHC_CMD_CRC_EN 0x00080000
-+#define ESDHC_CMD_INDEX_EN 0x00100000
-+#define ESDHC_CMD_DATA 0x00200000
-+#define ESDHC_CMD_TYPE_MASK 0x00c00000
-+#define ESDHC_CMD_INDEX 0x3f000000
-+
-+#define ESDHC_CMD_RESP_NONE 0x00000000
-+#define ESDHC_CMD_RESP_LONG 0x00010000
-+#define ESDHC_CMD_RESP_SHORT 0x00020000
-+#define ESDHC_CMD_RESP_SHORT_BUSY 0x00030000
-+
-+#define ESDHC_MAKE_CMD(c, f) (((c & 0xff) << 24) | (f & 0xfb0037))
-+
-+/* Response Register */
-+#define ESDHC_RESPONSE 0x10
-+
-+/* Buffer Data Port Register */
-+#define ESDHC_BUFFER 0x20
-+
-+/* Present State Register */
-+#define ESDHC_PRESENT_STATE 0x24
-+#define ESDHC_CMD_INHIBIT 0x00000001
-+#define ESDHC_DATA_INHIBIT 0x00000002
-+#define ESDHC_DOING_WRITE 0x00000100
-+#define ESDHC_DOING_READ 0x00000200
-+#define ESDHC_SPACE_AVAILABLE 0x00000400
-+#define ESDHC_DATA_AVAILABLE 0x00000800
-+#define ESDHC_CARD_PRESENT 0x00010000
-+#define ESDHC_WRITE_PROTECT 0x00080000
-+
-+/* Protocol control Register */
-+#define ESDHC_PROTOCOL_CONTROL 0x28
-+
-+#define ESDHC_CTRL_BUS_MASK 0x00000006
-+#define ESDHC_CTRL_4BITBUS 0x00000002
-+#define ESDHC_CTRL_D3_DETEC 0x00000008
-+#define ESDHC_CTRL_DTCT_EN 0x00000080
-+#define ESDHC_CTRL_DTCT_STATUS 0x00000040
-+#define ESDHC_CTRL_WU_CRM 0x04000000
-+#define ESDHC_CTRL_WU_CINS 0x02000000
-+#define ESDHC_CTRL_WU_CINT 0x01000000
-+
-+/* System Control Register */
-+#define ESDHC_SYSTEM_CONTROL 0x2C
-+
-+#define ESDHC_CLOCK_MASK 0x0000fff0
-+#define ESDHC_CLOCK_DEFAULT 0x00008000
-+#define ESDHC_PREDIV_SHIFT 8
-+#define ESDHC_DIVIDER_SHIFT 4
-+#define ESDHC_CLOCK_CARD_EN 0x00000004
-+#define ESDHC_CLOCK_INT_STABLE 0x00000002
-+#define ESDHC_CLOCK_INT_EN 0x00000001
-+
-+#define ESDHC_TIMEOUT_MASK 0x000f0000
-+#define ESDHC_TIMEOUT_SHIFT 16
-+
-+#define ESDHC_RESET_SHIFT 24
-+#define ESDHC_RESET_ALL 0x01
-+#define ESDHC_RESET_CMD 0x02
-+#define ESDHC_RESET_DATA 0x04
-+#define ESDHC_INIT_CARD 0x08
-+
-+/* Interrupt Register */
-+#define ESDHC_INT_STATUS 0x30
-+#define ESDHC_INT_ENABLE 0x34
-+#define ESDHC_SIGNAL_ENABLE 0x38
-+
-+#define ESDHC_INT_RESPONSE 0x00000001
-+#define ESDHC_INT_DATA_END 0x00000002
-+#define ESDHC_INT_DMA_END 0x00000008
-+#define ESDHC_INT_SPACE_AVAIL 0x00000010
-+#define ESDHC_INT_DATA_AVAIL 0x00000020
-+#define ESDHC_INT_CARD_INSERT 0x00000040
-+#define ESDHC_INT_CARD_REMOVE 0x00000080
-+#define ESDHC_INT_CARD_INT 0x00000100
-+
-+#define ESDHC_INT_TIMEOUT 0x00010000
-+#define ESDHC_INT_CRC 0x00020000
-+#define ESDHC_INT_END_BIT 0x00040000
-+#define ESDHC_INT_INDEX 0x00080000
-+#define ESDHC_INT_DATA_TIMEOUT 0x00100000
-+#define ESDHC_INT_DATA_CRC 0x00200000
-+#define ESDHC_INT_DATA_END_BIT 0x00400000
-+#define ESDHC_INT_ACMD12ERR 0x01000000
-+#define ESDHC_INT_DMAERR 0x10000000
-+
-+#define ESDHC_INT_NORMAL_MASK 0x00007FFF
-+#define ESDHC_INT_ERROR_MASK 0xFFFF8000
-+
-+#define ESDHC_INT_CMD_MASK (ESDHC_INT_RESPONSE | ESDHC_INT_TIMEOUT | \
-+ ESDHC_INT_CRC | ESDHC_INT_END_BIT | ESDHC_INT_INDEX)
-+#define ESDHC_INT_DATA_MASK (ESDHC_INT_DATA_END | ESDHC_INT_DMA_END | \
-+ ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL | \
-+ ESDHC_INT_DATA_TIMEOUT | ESDHC_INT_DATA_CRC | \
-+ ESDHC_INT_DATA_END_BIT)
-+
-+#define ESDHC_INT_INSERT_MASK (ESDHC_INT_DATA_END_BIT | ESDHC_INT_DATA_CRC | \
-+ ESDHC_INT_DATA_TIMEOUT | ESDHC_INT_INDEX | \
-+ ESDHC_INT_END_BIT | ESDHC_INT_CRC | ESDHC_INT_TIMEOUT | \
-+ ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL | \
-+ ESDHC_INT_DMA_END | ESDHC_INT_DATA_END | \
-+ ESDHC_INT_RESPONSE | ESDHC_INT_CARD_REMOVE)
-+
-+#define ESDHC_INT_REMOVE_MASK (ESDHC_INT_DATA_END_BIT | ESDHC_INT_DATA_CRC | \
-+ ESDHC_INT_DATA_TIMEOUT | ESDHC_INT_INDEX | \
-+ ESDHC_INT_END_BIT | ESDHC_INT_CRC | ESDHC_INT_TIMEOUT | \
-+ ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL | \
-+ ESDHC_INT_DMA_END | ESDHC_INT_DATA_END | \
-+ ESDHC_INT_RESPONSE | ESDHC_INT_CARD_INSERT)
-+
-+/* Auto CMD12 Error Status Register */
-+#define ESDHC_ACMD12_ERR 0x3C
-+
-+/* 3E-3F reserved */
-+/* Host Controller Capabilities */
-+#define ESDHC_CAPABILITIES 0x40
-+
-+#define ESDHC_MAX_BLOCK_MASK 0x00070000
-+#define ESDHC_MAX_BLOCK_SHIFT 16
-+#define ESDHC_CAN_DO_HISPD 0x00200000
-+#define ESDHC_CAN_DO_DMA 0x00400000
-+#define ESDHC_CAN_DO_SUSPEND 0x00800000
-+#define ESDHC_CAN_VDD_330 0x01000000
-+#define ESDHC_CAN_VDD_300 0x02000000
-+#define ESDHC_CAN_VDD_180 0x04000000
-+
-+/* Watermark Level Register */
-+#define ESDHC_WML 0x44
-+#define ESDHC_WML_MASK 0xff
-+#define ESDHC_WML_READ_SHIFT 0
-+#define ESDHC_WML_WRITE_SHIFT 16
-+
-+/* 45-4F reserved for more caps and max curren*/
-+
-+/* Force Event Register */
-+#define ESDHC_FORCE_EVENT 0x50
-+
-+/* 54-FB reserved */
-+
-+/* Host Controller Version Register */
-+#define ESDHC_HOST_VERSION 0xFC
-+
-+#define ESDHC_VENDOR_VER_MASK 0xFF00
-+#define ESDHC_VENDOR_VER_SHIFT 8
-+#define ESDHC_SPEC_VER_MASK 0x00FF
-+#define ESDHC_SPEC_VER_SHIFT 0
-+
-+#define ESDHC_DMA_SYSCTL 0x40C
-+#define ESDHC_DMA_SNOOP 0x00000040
-+
-+#define ESDHC_SLOTS_NUMBER 1
-+
-+/* The SCCR[SDHCCM] Register */
-+#define MPC837X_SCCR_OFFS 0xA08
-+#define MPC837X_SDHCCM_MASK 0x0c000000
-+#define MPC837X_SDHCCM_SHIFT 26
-+
-+#define esdhc_readl(addr) \
-+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-+
-+#define esdhc_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-+
-+static inline u32 fsl_readl(unsigned __iomem *addr)
-+{
-+ u32 val;
-+ /*val = inl(addr);*/
-+ val = esdhc_readl(addr);
-+ return val;
-+}
-+
-+static inline void fsl_writel(unsigned __iomem *addr, u32 val)
-+{
-+ /*outl(val, addr);*/
-+ esdhc_writel(val, addr);
-+}
-+
-+#define setbits32(_addr, _v) outl((_addr), inl(_addr) | (_v))
-+#define clrbits32(_addr, _v) outl((_addr), inl(_addr) & ~(_v))
-+
-+struct esdhc_chip;
-+
-+struct esdhc_host {
-+ struct esdhc_chip *chip;
-+ struct mmc_host *mmc; /* MMC structure */
-+
-+ spinlock_t lock; /* Mutex */
-+
-+ int flags; /* Host attributes */
-+#define ESDHC_USE_DMA (1<<0)
-+
-+ unsigned int max_clk; /* Max possible freq (MHz) */
-+ unsigned int timeout_clk; /* Timeout freq (KHz) */
-+
-+ unsigned int clock; /* Current clock (MHz) */
-+ unsigned short power; /* Current voltage */
-+ unsigned short bus_width; /* current bus width */
-+
-+ struct mmc_request *mrq; /* Current request */
-+ struct mmc_command *cmd; /* Current command */
-+ struct mmc_data *data; /* Current data request */
-+
-+ struct scatterlist *cur_sg; /* We're working on this */
-+ int num_sg; /* Entries left */
-+ int offset; /* Offset into current sg */
-+ int remain; /* Bytes left in current */
-+
-+ char slot_descr[20]; /* Name for reservations */
-+
-+ int card_insert;
-+
-+ int irq; /* Device IRQ */
-+ unsigned long addr; /* Bus address */
-+ unsigned int size; /* IO size */
-+ void __iomem *ioaddr; /* Mapped address */
-+
-+ struct tasklet_struct card_tasklet; /* Tasklet structures */
-+ struct tasklet_struct finish_tasklet;
-+
-+ struct timer_list timer; /* Timer for timeouts */
-+ void *dma_tx_buf;
-+ dma_addr_t dma_tx_dmahandle;
-+};
-+
-+struct esdhc_chip {
-+ struct platform_device *pdev;
-+
-+ unsigned long quirks;
-+
-+ int num_slots; /* Slots on controller */
-+ struct esdhc_host *hosts[0]; /* Pointers to hosts */
-+};
-+
-+#endif
diff --git a/target/linux/coldfire/patches/030-Add-SPI-device-configuration-for-FXS-and-FXO-on-MCF5.patch b/target/linux/coldfire/patches/030-Add-SPI-device-configuration-for-FXS-and-FXO-on-MCF5.patch
deleted file mode 100644
index 0f4e843..0000000
--- a/target/linux/coldfire/patches/030-Add-SPI-device-configuration-for-FXS-and-FXO-on-MCF5.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 2a73218ebe0bdca04cc9299da50d7f079ca46a7d Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:47 +0800
-Subject: [PATCH 30/52] Add SPI device configuration for FXS and FXO on MCF54451 platform
-
-Add SPI device configuration for FXS and FXO on MCF54451 platform.
-So FXS and FXO drivers can use SPI subsystem interfaces for the SPI
-read and write operations. So as to fix the confliction between FXO/FXS
-with other SPI devices.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/spi/Kconfig | 14 ++++++++++++++
- 1 files changed, 14 insertions(+), 0 deletions(-)
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -189,6 +189,20 @@ config SPI_COLDFIRE_DSPI_EDMA
- help
- Say "yes" if you want DSPI master driver to use eDMA for transfers.
-
-+config VOIP_FXS
-+ boolean "Coldfire VoIP FXS driver"
-+ depends on M54451 && SPI_MASTER && SPI_DSPI
-+ default n
-+ help
-+ Say "yes" if you want VoIP FXS driver to use DSPI for transfers.
-+
-+config VOIP_FXO
-+ boolean "Coldfire VoIP FXO driver"
-+ depends on M54451 && SPI_MASTER && SPI_DSPI
-+ default n
-+ help
-+ Say "yes" if you want VoIP FXO driver to use DSPI for transfers.
-+
- config SPI_IMX_VER_IMX1
- def_bool y if SOC_IMX1
-
diff --git a/target/linux/coldfire/patches/031-Add-watchdog-driver-support-for-MCF5445x-and-MCF547x.patch b/target/linux/coldfire/patches/031-Add-watchdog-driver-support-for-MCF5445x-and-MCF547x.patch
deleted file mode 100644
index 5362aa3..0000000
--- a/target/linux/coldfire/patches/031-Add-watchdog-driver-support-for-MCF5445x-and-MCF547x.patch
+++ /dev/null
@@ -1,338 +0,0 @@
-From 42bf8a598049f6cb3c90b1f28a2f1b8daebe3de8 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:47 +0800
-Subject: [PATCH 31/52] Add watchdog driver support for MCF5445x and MCF547x/MCF548x
-
-Add watchdog driver support for MCF5445x and MCF547x/MCF548x.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/watchdog/Kconfig | 9 ++
- drivers/watchdog/Makefile | 1 +
- drivers/watchdog/mcf_wdt.c | 292 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 302 insertions(+), 0 deletions(-)
- create mode 100644 drivers/watchdog/mcf_wdt.c
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -974,6 +974,15 @@ config BCM63XX_WDT
-
- # PARISC Architecture
-
-+# ColdFire Architecture
-+
-+config COLDFIRE_WATCHDOG
-+ tristate "ColdFire watchdog support"
-+ depends on M547X_8X || M5445X || M5441X
-+ help
-+ To compile this driver as a module, choose M here: the
-+ module will be called softdog.
-+
- # POWERPC Architecture
-
- config GEF_WDT
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -107,6 +107,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
-
- # M68K Architecture
- obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
-+obj-$(CONFIG_COLDFIRE_WATCHDOG) += mcf_wdt.o
-
- # MIPS Architecture
- obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/mcf_wdt.c
-@@ -0,0 +1,292 @@
-+/*
-+ * drivers/watchdog/mcf_wdt.c
-+ *
-+ * Watchdog driver for ColdFire processors
-+ *
-+ * Copyright (C) 2006-2007, 2009-2011 Freescale Semiconductor, Inc.
-+ * All Rights Reserved.
-+ *
-+ * Author: Shrek Wu<B16972@freesale.com>
-+ * ChengJu Cai<B22600@freesale.com>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/init.h>
-+#include <linux/bitops.h>
-+
-+#include <linux/uaccess.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+
-+static int nowayout;
-+static unsigned int heartbeat = MCF_GPT_MAX_TIMEOUT;
-+static unsigned long wdt_status;
-+
-+#define WDT_IN_USE 0
-+#define WDT_OK_TO_CLOSE 1
-+
-+static unsigned long wdt_tick_rate;
-+
-+#ifdef CONFIG_M547X_8X
-+static int
-+wdt_enable(int time)
-+{
-+ if (time > 30 || time < 1)
-+ return -EINVAL;
-+
-+ heartbeat = time;
-+
-+ MCF_GPT_GMS0 = 0;
-+ MCF_GPT_GCIR0 = MCF_GPT_GCIR_PRE(heartbeat * wdt_tick_rate) |
-+ MCF_GPT_GCIR_CNT(0xffff);
-+ MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS_WDEN |
-+ MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS_GPIO;
-+
-+ return 0;
-+}
-+
-+static void
-+wdt_disable(void)
-+{
-+ MCF_GPT_GMS0 = 0;
-+}
-+
-+static void
-+wdt_keepalive(void)
-+{
-+ MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS0;
-+}
-+
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+
-+/* Enable watchdog and set time-out */
-+static int
-+wdt_enable(int time)
-+{
-+ unsigned int sign = 0x01 << 31;
-+ int i = 0, timeout_n = 31;
-+ int max_timeout = sign / MCF_BUSCLK;
-+ unsigned int count;
-+
-+ if (time > max_timeout || time < 1)
-+ return -EINVAL;
-+
-+ count = time * MCF_BUSCLK;
-+
-+ for (i = 0; i < 31; i++) {
-+ if (count & (sign >> i)) {
-+ if ((count & (~(sign >> i))) == 0)
-+ timeout_n = 31 - i;
-+ else
-+ timeout_n = 31 - i + 1;
-+ break;
-+ }
-+ }
-+
-+ heartbeat = (unsigned int)(0x01 << timeout_n) / MCF_BUSCLK;
-+
-+ MCF_SCM_CWCR = MCF_SCM_CWCR_CWE
-+ | MCF_SCM_CWCR_CWRI(0x02)
-+ | MCF_SCM_CWCR_CWT(timeout_n);
-+
-+ return 0;
-+}
-+
-+/* Disable the watchdog */
-+static void
-+wdt_disable(void)
-+{
-+ MCF_SCM_CWCR = 0x00;
-+}
-+
-+/* Reset the watchdog timer counter */
-+static void
-+wdt_keepalive(void)
-+{
-+ MCF_SCM_CWSR = 0x55;
-+ MCF_SCM_CWSR = 0xAA;
-+}
-+#endif
-+
-+static int
-+mcf_wdt_open(struct inode *inode, struct file *file)
-+{
-+ int ret;
-+ if (test_and_set_bit(WDT_IN_USE, &wdt_status))
-+ return -EBUSY;
-+
-+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-+
-+ ret = wdt_enable(heartbeat);
-+ if (ret)
-+ return ret;
-+
-+ return nonseekable_open(inode, file);
-+}
-+
-+static ssize_t
-+mcf_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-+{
-+ if (len) {
-+ if (!nowayout) {
-+ size_t i;
-+
-+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-+
-+ for (i = 0; i != len; i++) {
-+ char c;
-+
-+ if (get_user(c, data + i))
-+ return -EFAULT;
-+ if (c == 'V')
-+ set_bit(WDT_OK_TO_CLOSE, &wdt_status);
-+ }
-+ }
-+ wdt_keepalive();
-+ }
-+
-+ return len;
-+}
-+
-+
-+static struct watchdog_info ident = {
-+ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
-+ WDIOF_KEEPALIVEPING,
-+ .identity = "Coldfire Watchdog",
-+};
-+
-+static long
-+mcf_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long __user arg)
-+{
-+ long ret = -ENOIOCTLCMD;
-+ int time = 0;
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user((struct watchdog_info *)arg, &ident,
-+ sizeof(ident)) ? -EFAULT : 0;
-+ break;
-+
-+ case WDIOC_GETSTATUS:
-+ ret = put_user(0, (int *)arg);
-+ break;
-+
-+ case WDIOC_GETBOOTSTATUS:
-+ ret = put_user(0, (int *)arg);
-+ break;
-+
-+ case WDIOC_SETTIMEOUT:
-+ ret = get_user(time, (int *)arg);
-+ if (ret)
-+ break;
-+
-+ ret = wdt_enable(time);
-+ if (ret)
-+ break;
-+ ret = put_user(heartbeat, (int *)arg);
-+ break;
-+
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(heartbeat, (int *)arg);
-+ break;
-+
-+ case WDIOC_KEEPALIVE:
-+ wdt_keepalive();
-+ ret = 0;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static int
-+mcf_wdt_release(struct inode *inode, struct file *file)
-+{
-+ if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
-+#ifdef CONFIG_M547X_8X
-+ MCF_GPT_GCIR0 = (0x0A << 16) | 0x09;
-+ MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS0;
-+#else
-+ wdt_keepalive();
-+#endif
-+ } else {
-+ printk(KERN_CRIT "WATCHDOG: Device closed unexpectdly\n");
-+ wdt_disable();
-+ }
-+
-+ clear_bit(WDT_IN_USE, &wdt_status);
-+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-+
-+#ifdef CONFIG_M547X_8X
-+ /*disable the XLB priority, otherwise the watchdog reset may fail*/
-+ MCF_XARB_PRIEN = 0;
-+ /* Also disable the PCI, Ugly! But there is issue between PCI and
-+ * watchdog. Otherwise the watchdog reset may fail, only valuable
-+ * for testing!
-+ */
-+ MCF_SPCR &= ~0x02;
-+ asm("tpf");
-+#endif
-+
-+ return 0;
-+}
-+
-+
-+static const struct file_operations mcf_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = mcf_wdt_write,
-+ .unlocked_ioctl = mcf_wdt_ioctl,
-+ .open = mcf_wdt_open,
-+ .release = mcf_wdt_release,
-+};
-+
-+static struct miscdevice mcf_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &mcf_wdt_fops,
-+};
-+
-+static int __init mcf_wdt_init(void)
-+{
-+ wdt_tick_rate = MCF_BUSCLK/0xffff;
-+#ifdef CONFIG_WATCHDOG_NOWAYOUT
-+ nowayout = 1;
-+#else
-+ nowayout = 0;
-+#endif
-+ printk(KERN_INFO "ColdFire watchdog driver is loaded.\n");
-+
-+ return misc_register(&mcf_wdt_miscdev);
-+}
-+
-+static void __exit mcf_wdt_exit(void)
-+{
-+ misc_deregister(&mcf_wdt_miscdev);
-+}
-+
-+module_init(mcf_wdt_init);
-+module_exit(mcf_wdt_exit);
-+
-+MODULE_AUTHOR("Deepak Saxena");
-+MODULE_DESCRIPTION("ColdFire Watchdog");
-+
-+module_param(heartbeat, int, 0);
-+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)");
-+
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
-+
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+
diff --git a/target/linux/coldfire/patches/032-Change-some-jffs2-warning-to-debug-info.patch b/target/linux/coldfire/patches/032-Change-some-jffs2-warning-to-debug-info.patch
deleted file mode 100644
index 3d1eabc..0000000
--- a/target/linux/coldfire/patches/032-Change-some-jffs2-warning-to-debug-info.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 8834b24adf7efc8a50fcbc153910276b355fb4e9 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:47 +0800
-Subject: [PATCH 32/52] Change some jffs2 warning to debug info
-
-As the NFC issue, the jffs2 verify buf may fail sometimes.
-This patch move this kind of warning to debug information.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- fs/jffs2/wbuf.c | 8 ++++----
- 1 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/fs/jffs2/wbuf.c
-+++ b/fs/jffs2/wbuf.c
-@@ -246,13 +246,13 @@ static int jffs2_verify_write(struct jff
- else
- eccstr = "OK or unused";
-
-- printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n",
-+ printk(KERN_DEBUG "Write verify error (ECC %s) at %08x. Wrote:\n",
- eccstr, c->wbuf_ofs);
-- print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
-+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
- c->wbuf, c->wbuf_pagesize, 0);
-
-- printk(KERN_WARNING "Read back:\n");
-- print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
-+ printk(KERN_DEBUG "Read back:\n");
-+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
- c->wbuf_verify, c->wbuf_pagesize, 0);
-
- return -EIO;
diff --git a/target/linux/coldfire/patches/033-Fix-structure-fsl_ssd1289_data-definition-bug-for-SS.patch b/target/linux/coldfire/patches/033-Fix-structure-fsl_ssd1289_data-definition-bug-for-SS.patch
deleted file mode 100644
index 1d1f677..0000000
--- a/target/linux/coldfire/patches/033-Fix-structure-fsl_ssd1289_data-definition-bug-for-SS.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 1ebacc69cb9b9c2508b1e75cb23ef572cda51eec Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:47 +0800
-Subject: [PATCH 33/52] Fix structure fsl_ssd1289_data definition bug for SSD1289 FB driver
-
-Fix the bug that structure fsl_ssd1289_data definition depends on
-DSPI enabled for SSD1289 framebuffer driver.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5441x/devices.c | 20 ++++++++++----------
- 1 files changed, 10 insertions(+), 10 deletions(-)
-
---- a/arch/m68k/coldfire/m5441x/devices.c
-+++ b/arch/m68k/coldfire/m5441x/devices.c
-@@ -138,6 +138,16 @@ static struct platform_device nfc_device
- };
- #endif
-
-+#if defined(CONFIG_FB_FSL_SSD1289) || defined(CONFIG_FB_FSL_SSD1289_MODULE)
-+static struct fsl_ssd1289_fb_display fsl_ssd1289_data = {
-+ .width = 320,
-+ .height = 240,
-+ .xres = 320,
-+ .yres = 240,
-+ .bpp = 16,
-+};
-+#endif
-+
- /*
- * DSPI
- */
-@@ -197,16 +207,6 @@ static struct coldfire_dspi_chip at26df0
- };
- #endif
-
--#if defined(CONFIG_FB_FSL_SSD1289) || defined(CONFIG_FB_FSL_SSD1289_MODULE)
--static struct fsl_ssd1289_fb_display fsl_ssd1289_data = {
-- .width = 320,
-- .height = 240,
-- .xres = 320,
-- .yres = 240,
-- .bpp = 16,
--};
--#endif
--
- #if defined(CONFIG_SSD1289_SPI_MODE)
- static struct coldfire_dspi_chip ssd1289_chip_info = {
- .mode = SPI_MODE_0,
diff --git a/target/linux/coldfire/patches/034-Enable-the-NFC-driver-for-soft_ecc.patch b/target/linux/coldfire/patches/034-Enable-the-NFC-driver-for-soft_ecc.patch
deleted file mode 100644
index f1f1c59..0000000
--- a/target/linux/coldfire/patches/034-Enable-the-NFC-driver-for-soft_ecc.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 25ebef8c87221774de01d1f1de4fb615fcfc6b54 Mon Sep 17 00:00:00 2001
-From: Jason Jin <Jason.jin@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:47 +0800
-Subject: [PATCH 34/52] Enable the NFC driver for soft_ecc.
-
-If enabled YAFFS2 support, soft ecc should be used for the
-nand flash driver.
-
-Signed-off-by: Jason Jin <Jason.jin@freescale.com>
----
- drivers/mtd/nand/Kconfig | 6 ++++++
- drivers/mtd/nand/fsl_nfc.c | 12 +++++++++---
- 2 files changed, 15 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -481,6 +481,12 @@ config MTD_NAND_FSL_NFC
- Enables support for NAND Flash chips wired onto Freescale PowerPC
- processor localbus with User-Programmable Machine support.
-
-+config MTD_NAND_FSL_NFC_SWECC
-+ bool "Software ECC"
-+ depends on MTD_NAND_FSL_NFC
-+ help
-+ Use software ECC.
-+
- config MTD_NAND_MXC
- tristate "MXC NAND support"
- depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
---- a/drivers/mtd/nand/fsl_nfc.c
-+++ b/drivers/mtd/nand/fsl_nfc.c
-@@ -403,9 +403,15 @@ fsl_nfc_command(struct mtd_info *mtd, un
- if (page != -1)
- prv->page = page;
-
-- nfc_set_field(mtd, NFC_FLASH_CONFIG,
-- CONFIG_ECC_MODE_MASK,
-- CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE);
-+ if(hardware_ecc)
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_MODE_MASK,
-+ CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE);
-+ else
-+ /* set ECC BY_PASS */
-+ nfc_set_field(mtd, NFC_FLASH_CONFIG,
-+ CONFIG_ECC_MODE_MASK,
-+ CONFIG_ECC_MODE_SHIFT, ECC_BYPASS);
-
- if (!(page%0x40)) {
- nfc_set_field(mtd, NFC_FLASH_CONFIG,
diff --git a/target/linux/coldfire/patches/036-Add-FlexCAN-support-on-ColdFire-M548X-M54418-platfor.patch b/target/linux/coldfire/patches/036-Add-FlexCAN-support-on-ColdFire-M548X-M54418-platfor.patch
deleted file mode 100644
index af5e84f..0000000
--- a/target/linux/coldfire/patches/036-Add-FlexCAN-support-on-ColdFire-M548X-M54418-platfor.patch
+++ /dev/null
@@ -1,764 +0,0 @@
-From c3b97e08b06be76ee9f2b410b13c045425fc7f3e Mon Sep 17 00:00:00 2001
-From: Jingchang Lu <b35083@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:48 +0800
-Subject: [PATCH 36/52] Add FlexCAN support on ColdFire M548X, M54418 platform
-
-Each cpu core has two FlexCAN interface, and the M54418's FlexCAN
-also support Rx message buffer FIFO mode but M548X not.
-
-Signed-off-by: Jingchang Lu <b35083@freescale.com>
----
- arch/m68k/Kconfig | 2 +
- arch/m68k/coldfire/m5441x/Makefile | 4 +
- arch/m68k/coldfire/m5441x/mcf-flexcan.c | 121 ++++++++++++++++
- arch/m68k/coldfire/m547x/Makefile | 3 +
- arch/m68k/coldfire/m547x/mcf-flexcan.c | 117 +++++++++++++++
- drivers/net/can/Kconfig | 9 ++
- drivers/net/can/flexcan.c | 239 ++++++++++++++++++++++++++++++-
- 7 files changed, 489 insertions(+), 6 deletions(-)
- create mode 100644 arch/m68k/coldfire/m5441x/mcf-flexcan.c
- create mode 100644 arch/m68k/coldfire/m547x/mcf-flexcan.c
-
---- a/arch/m68k/Kconfig
-+++ b/arch/m68k/Kconfig
-@@ -372,6 +372,7 @@ config M547X
- config M548X
- bool
- depends on M547X_8X
-+ select HAVE_CAN_FLEXCAN
- default n
-
- choice
-@@ -430,6 +431,7 @@ config M5441X
- select GENERIC_TIME
- select USB_EHCI_FSL
- select HAVE_FSL_USB_DR
-+ select HAVE_CAN_FLEXCAN
- help
- This option will add support for the MCF5441x processor with mmu.
-
---- a/arch/m68k/coldfire/m5441x/Makefile
-+++ b/arch/m68k/coldfire/m5441x/Makefile
-@@ -36,3 +36,7 @@ endif
- ifneq ($(CONFIG_MODELO_SWITCH),)
- obj-y += l2switch.o
- endif
-+
-+ifneq ($(CONFIG_CAN_FLEXCAN),)
-+obj-y += mcf-flexcan.o
-+endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/mcf-flexcan.c
-@@ -0,0 +1,121 @@
-+/*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All rights reserved.
-+ *
-+ * Author: Huan Wang, b18965@freescale.com, Fri Aug 08 2008
-+ *
-+ * Description:
-+ * CAN bus driver for Freescale Coldfire embedded CPU
-+ *
-+ * Changelog:
-+ * Fri Aug 08 2008 Huan Wang <b18965@freescale.com>
-+ * - create, support for MCF548x
-+ *
-+ * Tue Dec 08 2009 ChengJu Cai <b22600@freescale.com>
-+ * - support for MCF532x MCF5253 MCF5227x
-+ *
-+ * July 2011 Jingchang.Lu <b35083@freescale.com>
-+ * - Add into kernel CAN driver layer
-+ *
-+ * This file is part of the Linux kernel
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <asm/mcfsim.h>
-+
-+
-+static struct resource mcf5441x_can0_resources[] = {
-+ [0] = {
-+ .start = 0xFC020000,
-+ .end = 0xFC0208C0,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = 0 + 64 + 64,
-+ .end = 0 + 64 + 64,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource mcf5441x_can1_resources[] = {
-+ [0] = {
-+ .start = 0xFC024000,
-+ .end = 0xFC0248C0,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = 4 + 64 + 64,
-+ .end = 4 + 64 + 64,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device mcf_flexcan[PDEV_MAX] = {
-+ [0] = {
-+ .name = "flexcan",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(mcf5441x_can0_resources),
-+ .resource = mcf5441x_can0_resources,
-+ },
-+ [1] = {
-+ .name = "flexcan",
-+ .id = 1,
-+ .num_resources = ARRAY_SIZE(mcf5441x_can1_resources),
-+ .resource = mcf5441x_can1_resources,
-+ },
-+
-+};
-+
-+
-+static void __init mcf_flexcan_config(void)
-+{
-+ MCF_PM_PPMCR0 = 8; /* enable FlexCAN0 clock */
-+ MCF_PM_PPMCR0 = 9; /* enable FlexCAN1 clock */
-+
-+ /* CAN0 */
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_I2C0SCL_MASK) |
-+ MCF_GPIO_PAR_CANI2C_I2C0SCL_CAN0TX;
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_I2C0SDA_MASK) |
-+ MCF_GPIO_PAR_CANI2C_I2C0SDA_CAN0RX;
-+ /* CAN1 */
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_CAN1TX_MASK) |
-+ MCF_GPIO_PAR_CANI2C_CAN1TX_CAN1TX;
-+ MCF_GPIO_PAR_CANI2C =
-+ (MCF_GPIO_PAR_CANI2C & MCF_GPIO_PAR_CANI2C_CAN1RX_MASK) |
-+ MCF_GPIO_PAR_CANI2C_CAN1RX_CAN1RX;
-+
-+
-+}
-+
-+static int __init flexcan_of_to_pdev(void)
-+{
-+ int i, err = -ENODEV;
-+ for (i = 0; i < PDEV_MAX; i++) {
-+ err = platform_device_register(&mcf_flexcan[i]);
-+ if (err)
-+ return err;
-+ printk(KERN_INFO "ColdFire FlexCAN devices loaded\n");
-+ }
-+ return err;
-+}
-+
-+static int __init mcf_flexcan_init(void)
-+{
-+ int err;
-+ mcf_flexcan_config();
-+ err = flexcan_of_to_pdev();
-+
-+ return 0;
-+}
-+
-+arch_initcall(mcf_flexcan_init);
---- a/arch/m68k/coldfire/m547x/Makefile
-+++ b/arch/m68k/coldfire/m547x/Makefile
-@@ -5,3 +5,6 @@
- obj-$(CONFIG_M547X_8X) += config.o mcf548x-devices.o devices.o
- obj-$(CONFIG_PCI) += pci.o pci_dummy.o
- obj-$(CONFIG_MCD_DMA) += dma.o
-+ifneq ($(CONFIG_CAN_FLEXCAN),)
-+obj-y += mcf-flexcan.o
-+endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x/mcf-flexcan.c
-@@ -0,0 +1,117 @@
-+/*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All rights reserved.
-+ *
-+ * Author: Huan Wang, b18965@freescale.com, Fri Aug 08 2008
-+ *
-+ * Description:
-+ * CAN bus driver for Freescale Coldfire embedded CPU
-+ *
-+ * Changelog:
-+ * Fri Aug 08 2008 Huan Wang <b18965@freescale.com>
-+ * - create, support for MCF548x
-+ *
-+ * Tue Dec 08 2009 ChengJu Cai <b22600@freescale.com>
-+ * - support for MCF532x MCF5253 MCF5227x
-+ *
-+ * July 2011 Jingchang.Lu <b35083@freescale.com>
-+ * - Add into kernel CAN driver layer
-+ *
-+ * This file is part of the Linux kernel
-+ * This is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <asm/mcfsim.h>
-+
-+
-+static struct resource mcf548x_can0_resources[] = {
-+ [0] = {
-+ .start = MCF_MBAR + 0x0000A000,
-+ .end = MCF_MBAR + 0x0000A7FF,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = 49 + 64,
-+ .end = 49 + 64,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource mcf548x_can1_resources[] = {
-+ [0] = {
-+ .start = MCF_MBAR + 0x0000A800,
-+ .end = MCF_MBAR + 0x0000AFFF,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = 55 + 64,
-+ .end = 55 + 64,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device mcf_flexcan[PDEV_MAX] = {
-+ [0] = {
-+ .name = "flexcan",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(mcf548x_can1_resources),
-+ .resource = mcf548x_can0_resources,
-+ },
-+ [1] = {
-+ .name = "flexcan",
-+ .id = 1,
-+ .num_resources = ARRAY_SIZE(mcf548x_can1_resources),
-+ .resource = mcf548x_can1_resources,
-+ },
-+
-+};
-+
-+
-+static void __init mcf_flexcan_config(void)
-+{
-+ int i;
-+ MCF_PAR_TIMER = MCF_PAR_TIMER | 0x28;
-+ MCF_PAR_TIMER = MCF_PAR_TIMER & 0xf8;
-+ MCF_PAR_DSPI = MCF_PAR_DSPI | 0x0a00;
-+ MCF_PAR_FECI2CIRQ = MCF_PAR_FECI2CIRQ | 0x0283;
-+ MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) & 0x0f;
-+ MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) | 0x50;
-+
-+ for (i = 0; i < 2; i++) {
-+ MCF_ICR(ISC_CANn_MBOR(i)) = 0x33 + 0x01 * i;
-+ MCF_ICR(ISC_CANn_ERR(i)) = 0x33 + 0x01 * i;
-+ MCF_ICR(ISC_CANn_BUSOFF(i)) = 0x33 + 0x01 * i;
-+ }
-+
-+
-+}
-+
-+static int __init flexcan_of_to_pdev(void)
-+{
-+ int i, err = -ENODEV;
-+ for (i = 0; i < PDEV_MAX; i++) {
-+ err = platform_device_register(&mcf_flexcan[i]);
-+ if (err)
-+ return err;
-+ printk(KERN_INFO "ColdFire FlexCAN devices loaded\n");
-+ }
-+ return err;
-+}
-+
-+static int __init mcf_flexcan_init(void)
-+{
-+ int err;
-+ mcf_flexcan_config();
-+ err = flexcan_of_to_pdev();
-+
-+ return 0;
-+}
-+
-+arch_initcall(mcf_flexcan_init);
---- a/drivers/net/can/Kconfig
-+++ b/drivers/net/can/Kconfig
-@@ -103,6 +103,15 @@ config CAN_FLEXCAN
- ---help---
- Say Y here if you want to support for Freescale FlexCAN.
-
-+config FLEXCAN_NORXFIFO
-+ bool "FlexCAN message buffer without Rx FIFO mode"
-+ depends on CAN_FLEXCAN && COLDFIRE
-+ default n
-+ ---help---
-+ Say Y here if you FlexCAN message buffer has no Rx FIFO mode.
-+ Freescale Coldfire series have different FlexCAN core version,
-+ MCF54418's support Rx FIFO mode while others such as MCF5485 not.
-+
- config PCH_CAN
- tristate "PCH CAN"
- depends on CAN_DEV && PCI
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -4,6 +4,7 @@
- * Copyright (c) 2005-2006 Varma Electronics Oy
- * Copyright (c) 2009 Sascha Hauer, Pengutronix
- * Copyright (c) 2010 Marc Kleine-Budde, Pengutronix
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Based on code originally by Andrey Volkov <avolkov@varma-el.com>
- *
-@@ -35,8 +36,28 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
-
-+#ifndef CONFIG_COLDFIRE
- #include <mach/clock.h>
-
-+#else
-+#include <asm/mcfsim.h>
-+
-+#undef readb
-+#undef readw
-+#undef readl
-+#define readb(addr) __raw_readb(addr)
-+#define readw(addr) __raw_readw(addr)
-+#define readl(addr) __raw_readl(addr)
-+
-+#undef writeb
-+#undef writew
-+#undef writel
-+#define writeb(b, addr) __raw_writeb(b, addr)
-+#define writew(b, addr) __raw_writew(b, addr)
-+#define writel(b, addr) __raw_writel(b, addr)
-+
-+#endif
-+
- #define DRV_NAME "flexcan"
-
- /* 8 for RX fifo and 2 error handling */
-@@ -85,12 +106,34 @@
- #define FLEXCAN_CTRL_LOM BIT(3)
- #define FLEXCAN_CTRL_PROPSEG(x) ((x) & 0x07)
- #define FLEXCAN_CTRL_ERR_BUS (FLEXCAN_CTRL_ERR_MSK)
-+
-+#ifdef CONFIG_COLDFIRE
-+
-+# if defined(CONFIG_M548X)
-+
-+#define FLEXCAN_CTRL_ERR_STATE FLEXCAN_CTRL_BOFF_MSK
-+#define FLEXCAN_CTRL_ERR_ALL \
-+ (FLEXCAN_CTRL_BOFF_MSK | FLEXCAN_CTRL_ERR_MSK)
-+
-+# elif defined(CONFIG_M5441X)
-+
- #define FLEXCAN_CTRL_ERR_STATE \
- (FLEXCAN_CTRL_TWRN_MSK | FLEXCAN_CTRL_RWRN_MSK | \
- FLEXCAN_CTRL_BOFF_MSK)
- #define FLEXCAN_CTRL_ERR_ALL \
- (FLEXCAN_CTRL_ERR_BUS | FLEXCAN_CTRL_ERR_STATE)
-
-+# endif
-+
-+#else /* !CONFIG_COLDFIRE */
-+
-+#define FLEXCAN_CTRL_ERR_STATE \
-+ (FLEXCAN_CTRL_TWRN_MSK | FLEXCAN_CTRL_RWRN_MSK | \
-+ FLEXCAN_CTRL_BOFF_MSK)
-+#define FLEXCAN_CTRL_ERR_ALL \
-+ (FLEXCAN_CTRL_ERR_BUS | FLEXCAN_CTRL_ERR_STATE)
-+
-+#endif
- /* FLEXCAN error and status register (ESR) bits */
- #define FLEXCAN_ESR_TWRN_INT BIT(17)
- #define FLEXCAN_ESR_RWRN_INT BIT(16)
-@@ -121,6 +164,18 @@
- (FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)
-
- /* FLEXCAN interrupt flag register (IFLAG) bits */
-+
-+#ifdef CONFIG_FLEXCAN_NORXFIFO
-+
-+/* MB assignment for no Rx FIFO mode module */
-+#define FLEXCAN_TX_BUF_ID 0
-+#define FLEXCAN_RX_EXT_ID 15
-+#define FLEXCAN_IFLAG_RX_FIFO_AVAILABLE 0xfffe
-+#define FLEXCAN_IFLAG_DEFAULT \
-+ (FLEXCAN_IFLAG_RX_FIFO_AVAILABLE | (0x01 << FLEXCAN_TX_BUF_ID))
-+
-+#else
-+
- #define FLEXCAN_TX_BUF_ID 8
- #define FLEXCAN_IFLAG_BUF(x) BIT(x)
- #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7)
-@@ -130,6 +185,7 @@
- (FLEXCAN_IFLAG_RX_FIFO_OVERFLOW | FLEXCAN_IFLAG_RX_FIFO_AVAILABLE | \
- FLEXCAN_IFLAG_BUF(FLEXCAN_TX_BUF_ID))
-
-+#endif
- /* FLEXCAN message buffers */
- #define FLEXCAN_MB_CNT_CODE(x) (((x) & 0xf) << 24)
- #define FLEXCAN_MB_CNT_SRR BIT(22)
-@@ -163,7 +219,11 @@ struct flexcan_regs {
- u32 iflag2; /* 0x2c */
- u32 iflag1; /* 0x30 */
- u32 _reserved2[19];
-+#ifdef CONFIG_COLDFIRE
-+ struct flexcan_mb cantxfg[CAN_MB];
-+#else
- struct flexcan_mb cantxfg[64];
-+#endif
- };
-
- struct flexcan_priv {
-@@ -181,8 +241,13 @@ struct flexcan_priv {
-
- static struct can_bittiming_const flexcan_bittiming_const = {
- .name = DRV_NAME,
-+#ifdef CONFIG_COLDFIRE
-+ .tseg1_min = 1,
-+ .tseg1_max = 8,
-+#else
- .tseg1_min = 4,
- .tseg1_max = 16,
-+#endif
- .tseg2_min = 2,
- .tseg2_max = 8,
- .sjw_max = 4,
-@@ -248,7 +313,7 @@ static int flexcan_start_xmit(struct sk_
- struct net_device_stats *stats = &dev->stats;
- struct flexcan_regs __iomem *regs = priv->base;
- struct can_frame *cf = (struct can_frame *)skb->data;
-- u32 can_id;
-+ u32 can_id, tmp, tmp1;
- u32 ctrl = FLEXCAN_MB_CNT_CODE(0xc) | (cf->can_dlc << 16);
-
- if (can_dropped_invalid_skb(dev, skb))
-@@ -259,6 +324,11 @@ static int flexcan_start_xmit(struct sk_
- if (cf->can_id & CAN_EFF_FLAG) {
- can_id = cf->can_id & CAN_EFF_MASK;
- ctrl |= FLEXCAN_MB_CNT_IDE | FLEXCAN_MB_CNT_SRR;
-+#ifdef CONFIG_COLDFIRE
-+ tmp = (can_id & CAN_SFF_MASK) << 18;
-+ tmp1 = can_id >> 11;
-+ can_id = tmp | tmp1;
-+#endif
- } else {
- can_id = (cf->can_id & CAN_SFF_MASK) << 18;
- }
-@@ -456,6 +526,87 @@ static int flexcan_poll_state(struct net
- return 1;
- }
-
-+#ifdef CONFIG_FLEXCAN_NORXFIFO
-+/* Get one frame from receive message buffer */
-+static int flexcan_read_frame(struct net_device *dev)
-+{
-+ const struct flexcan_priv *priv = netdev_priv(dev);
-+ struct flexcan_regs __iomem *regs = priv->base;
-+ struct net_device_stats *stats = &dev->stats;
-+ struct can_frame *cf;
-+ struct sk_buff *skb;
-+ struct flexcan_mb __iomem *mb;
-+ u32 reg_iflag1, reg_ctrl, reg_id, i;
-+
-+ reg_iflag1 = readl(&regs->iflag1);
-+
-+ /* buf[0] if for TX */
-+ for (i = 0; i < CAN_MB; i++) {
-+ if (i == FLEXCAN_TX_BUF_ID)
-+ continue;
-+ /* find one received message slot */
-+ if (reg_iflag1 & (0x01 << i))
-+ break;
-+ }
-+ if (i >= CAN_MB)
-+ return 0;
-+
-+ mb = &regs->cantxfg[i];
-+
-+ skb = alloc_can_skb(dev, &cf);
-+ if (unlikely(!skb)) {
-+ stats->rx_dropped++;
-+ return 0;
-+ }
-+
-+ reg_ctrl = readl(&mb->can_ctrl);
-+ reg_id = readl(&mb->can_id);
-+
-+ /* deactive RX buff */
-+ writel(0, &mb->can_ctrl);
-+
-+ if (reg_ctrl & FLEXCAN_MB_CNT_IDE) {
-+#ifdef CONFIG_COLDFIRE
-+ /* Coldfire can_id order */
-+ cf->can_id = (reg_id & CAN_EFF_MASK) >> 18;
-+ cf->can_id |= (reg_id & 0x3ffff) << 11;
-+ cf->can_id |= CAN_EFF_FLAG;
-+#else
-+ cf->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
-+#endif
-+ } else
-+ cf->can_id = (reg_id >> 18) & CAN_SFF_MASK;
-+
-+ if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
-+ cf->can_id |= CAN_RTR_FLAG;
-+ cf->can_dlc = get_can_dlc((reg_ctrl >> 16) & 0xf);
-+
-+ *(__be32 *)(cf->data + 0) = cpu_to_be32(readl(&mb->data[0]));
-+ *(__be32 *)(cf->data + 4) = cpu_to_be32(readl(&mb->data[1]));
-+
-+ /* reactive RX buffer */
-+ if (i == FLEXCAN_RX_EXT_ID)
-+ writel(FLEXCAN_MB_CNT_CODE(0x4)|0x600000,
-+ &regs->cantxfg[i].can_ctrl);
-+ else
-+ writel(FLEXCAN_MB_CNT_CODE(0x4),
-+ &regs->cantxfg[i].can_ctrl);
-+
-+ /* mark as read */
-+ writel((0x01 << i), &regs->iflag1);
-+ /* release MB lock */
-+ readl(&regs->timer);
-+
-+ netif_receive_skb(skb);
-+
-+ stats->rx_packets++;
-+ stats->rx_bytes += cf->can_dlc;
-+
-+ return 1;
-+
-+}
-+#else
-+
- static void flexcan_read_fifo(const struct net_device *dev,
- struct can_frame *cf)
- {
-@@ -466,9 +617,16 @@ static void flexcan_read_fifo(const stru
-
- reg_ctrl = readl(&mb->can_ctrl);
- reg_id = readl(&mb->can_id);
-- if (reg_ctrl & FLEXCAN_MB_CNT_IDE)
-+ if (reg_ctrl & FLEXCAN_MB_CNT_IDE) {
-+#ifdef CONFIG_COLDFIRE
-+ /* ColdFire can_id order as follow */
-+ cf->can_id = (reg_id & CAN_EFF_MASK) >> 18;
-+ cf->can_id |= (reg_id & 0x3ffff) << 11;
-+ cf->can_id |= CAN_EFF_FLAG;
-+#else
- cf->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
-- else
-+#endif
-+ } else
- cf->can_id = (reg_id >> 18) & CAN_SFF_MASK;
-
- if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
-@@ -503,6 +661,7 @@ static int flexcan_read_frame(struct net
-
- return 1;
- }
-+#endif
-
- static int flexcan_poll(struct napi_struct *napi, int quota)
- {
-@@ -554,6 +713,14 @@ static irqreturn_t flexcan_irq(int irq,
- reg_iflag1 = readl(&regs->iflag1);
- reg_esr = readl(&regs->esr);
- writel(FLEXCAN_ESR_ERR_INT, &regs->esr); /* ACK err IRQ */
-+#ifdef CONFIG_COLDFIRE
-+#ifdef CONFIG_FLEXCAN_NORXFIFO
-+ writel(FLEXCAN_ESR_BOFF_INT, &regs->esr);
-+#else
-+ /* ACK TWRN and RWRN error, and bus-off interrupt*/
-+ writel(FLEXCAN_ESR_ERR_STATE, &regs->esr);
-+#endif
-+#endif
-
- /*
- * schedule NAPI in case of:
-@@ -575,13 +742,14 @@ static irqreturn_t flexcan_irq(int irq,
- &regs->ctrl);
- napi_schedule(&priv->napi);
- }
--
-+#ifndef CONFIG_FLEXCAN_NORXFIFO
- /* FIFO overflow */
- if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_OVERFLOW) {
- writel(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW, &regs->iflag1);
- dev->stats.rx_over_errors++;
- dev->stats.rx_errors++;
- }
-+#endif
-
- /* transmission complete interrupt */
- if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) {
-@@ -676,9 +844,14 @@ static int flexcan_chip_start(struct net
- *
- */
- reg_mcr = readl(&regs->mcr);
-+#ifdef CONFIG_FLEXCAN_NORXFIFO
-+ reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
-+ FLEXCAN_MCR_SUPV;
-+#else
- reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT |
- FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN |
- FLEXCAN_MCR_IDAM_C;
-+#endif
- dev_dbg(dev->dev.parent, "%s: writing mcr=0x%08x", __func__, reg_mcr);
- writel(reg_mcr, &regs->mcr);
-
-@@ -713,9 +886,19 @@ static int flexcan_chip_start(struct net
- writel(0, &regs->cantxfg[i].can_id);
- writel(0, &regs->cantxfg[i].data[0]);
- writel(0, &regs->cantxfg[i].data[1]);
--
-+#ifdef CONFIG_FLEXCAN_NORXFIFO
-+ if (i == FLEXCAN_TX_BUF_ID)
-+ continue;
-+ if (i == FLEXCAN_RX_EXT_ID) /* enable receive extend message */
-+ writel(FLEXCAN_MB_CNT_CODE(0x4)|0x600000,
-+ &regs->cantxfg[i].can_ctrl);
-+ else
-+ writel(FLEXCAN_MB_CNT_CODE(0x4),
-+ &regs->cantxfg[i].can_ctrl);
-+#else
- /* put MB into rx queue */
- writel(FLEXCAN_MB_CNT_CODE(0x4), &regs->cantxfg[i].can_ctrl);
-+#endif
- }
-
- /* acceptance mask/acceptance code (accept everything) */
-@@ -772,6 +955,7 @@ static void flexcan_chip_stop(struct net
- return;
- }
-
-+
- static int flexcan_open(struct net_device *dev)
- {
- struct flexcan_priv *priv = netdev_priv(dev);
-@@ -786,6 +970,24 @@ static int flexcan_open(struct net_devic
- err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev);
- if (err)
- goto out_close;
-+ err = request_irq(dev->irq + 1, flexcan_irq, \
-+ IRQF_DISABLED, dev->name, dev);
-+ if (err) {
-+ free_irq(dev->irq, dev);
-+ goto out_close;
-+ }
-+#if defined(CONFIG_M548X)
-+ err = request_irq(dev->irq + 2, flexcan_irq, \
-+ IRQF_DISABLED, dev->name, dev);
-+#elif defined(CONFIG_M5441X)
-+ err = request_irq(dev->irq + 3, flexcan_irq, \
-+ IRQF_DISABLED, dev->name, dev);
-+#endif
-+ if (err) {
-+ free_irq(dev->irq, dev);
-+ free_irq(dev->irq + 1, dev);
-+ goto out_close;
-+ }
-
- /* start chip and queuing */
- err = flexcan_chip_start(dev);
-@@ -813,6 +1015,14 @@ static int flexcan_close(struct net_devi
- flexcan_chip_stop(dev);
-
- free_irq(dev->irq, dev);
-+#ifdef CONFIG_COLDFIRE
-+ free_irq(dev->irq + 1, dev);
-+#if defined(CONFIG_M548X)
-+ free_irq(dev->irq + 2, dev);
-+#elif defined(CONFIG_M5441X)
-+ free_irq(dev->irq + 3, dev);
-+#endif
-+#endif
- clk_disable(priv->clk);
-
- close_candev(dev);
-@@ -854,14 +1064,23 @@ static int __devinit register_flexcandev
-
- clk_enable(priv->clk);
-
-+#if !defined(CONFIG_M548X)
- /* select "bus clock", chip must be disabled */
- flexcan_chip_disable(priv);
- reg = readl(&regs->ctrl);
- reg |= FLEXCAN_CTRL_CLK_SRC;
- writel(reg, &regs->ctrl);
-+#endif
-
- flexcan_chip_enable(priv);
-
-+#ifdef CONFIG_FLEXCAN_NORXFIFO
-+ /* set freeze, halt and restrict register access */
-+ reg = readl(&regs->mcr);
-+ reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
-+ FLEXCAN_MCR_SUPV;
-+ writel(reg, &regs->mcr);
-+#else
- /* set freeze, halt and activate FIFO, restrict register access */
- reg = readl(&regs->mcr);
- reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
-@@ -880,6 +1099,7 @@ static int __devinit register_flexcandev
- err = -ENODEV;
- goto out;
- }
-+#endif
-
- err = register_candev(dev);
-
-@@ -901,17 +1121,19 @@ static int __devinit flexcan_probe(struc
- struct net_device *dev;
- struct flexcan_priv *priv;
- struct resource *mem;
-- struct clk *clk;
-+ struct clk *clk = NULL;
- void __iomem *base;
- resource_size_t mem_size;
- int err, irq;
-
-+#ifndef CONFIG_COLDFIRE
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "no clock defined\n");
- err = PTR_ERR(clk);
- goto failed_clock;
- }
-+#endif
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq = platform_get_irq(pdev, 0);
-@@ -943,7 +1165,12 @@ static int __devinit flexcan_probe(struc
- dev->flags |= IFF_ECHO; /* we support local echo in hardware */
-
- priv = netdev_priv(dev);
-+#ifdef CONFIG_COLDFIRE
-+ /* return value is core clock but we need bus clock */
-+ priv->can.clock.freq = (clk_get_rate(clk)/2);
-+#else
- priv->can.clock.freq = clk_get_rate(clk);
-+#endif
- priv->can.bittiming_const = &flexcan_bittiming_const;
- priv->can.do_set_mode = flexcan_set_mode;
- priv->can.do_get_berr_counter = flexcan_get_berr_counter;
diff --git a/target/linux/coldfire/patches/037-Add-ColdFire-MCF54455-PATA-interface-support.patch b/target/linux/coldfire/patches/037-Add-ColdFire-MCF54455-PATA-interface-support.patch
deleted file mode 100644
index 730086e..0000000
--- a/target/linux/coldfire/patches/037-Add-ColdFire-MCF54455-PATA-interface-support.patch
+++ /dev/null
@@ -1,934 +0,0 @@
-From 8e46c06091fd87904205a977be3c784e3ac61e95 Mon Sep 17 00:00:00 2001
-From: Jingchang Lu <b35083@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:48 +0800
-Subject: [PATCH 37/52] Add ColdFire MCF54455 PATA interface support
-
-ColdFire MCF54455 parallel ATA controller support
-both uDMA and PIO mode, this driver implements all.
-
-Signed-off-by: Jingchang Lu <b35083@freescale.com>
----
- arch/m68k/include/asm/pata_fsl.h | 17 +
- drivers/ata/Kconfig | 23 +-
- drivers/ata/Makefile | 1 +
- drivers/ata/pata_fsl.c | 844 ++++++++++++++++++++++++++++++++++++++
- 4 files changed, 884 insertions(+), 1 deletions(-)
- create mode 100644 arch/m68k/include/asm/pata_fsl.h
- create mode 100644 drivers/ata/pata_fsl.c
-
---- /dev/null
-+++ b/arch/m68k/include/asm/pata_fsl.h
-@@ -0,0 +1,17 @@
-+/*
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#ifndef _ASM_M68K_PATA_FSL_H
-+#define _ASM_M68K_PATA_FSL_H
-+
-+/* ATA mapped IO address translate function */
-+extern unsigned int io_ata_virt2phys(void *x);
-+extern void *io_ata_phys2virt(unsigned int x);
-+
-+
-+#endif
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -14,7 +14,7 @@ menuconfig ATA
- tristate "Serial ATA and Parallel ATA drivers"
- depends on HAS_IOMEM
- depends on BLOCK
-- depends on !(M32R || M68K) || BROKEN
-+ depends on !(M32R) || BROKEN
- select SCSI
- ---help---
- If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
-@@ -687,6 +687,27 @@ config PATA_WINBOND
-
- If unsure, say N.
-
-+config PATA_FSL
-+ tristate "Freescale on-chip PATA support"
-+ depends on (ARCH_MX3 || ARCH_MX27 || PPC_512x || M54455)
-+ help
-+ Some Freescale processors SOC have parallel ATA controller,
-+ such as ColdFire MCF54455.
-+
-+ Say Y here if you wish to use the on-chip ATA interface.
-+
-+ If you are unsure, say N to this.
-+
-+config FSL_PATA_USE_DMA
-+ bool "Freescale PATA eDMA support"
-+ depends on PATA_FSL && COLDFIRE_EDMA
-+ default y
-+ help
-+ This option enables the uDMA support over PATA interface
-+ which can improve performance than PIO mode for read and write.
-+
-+ If unsure, say Y.
-+
- endif # ATA_BMDMA
-
- comment "PIO-only SFF controllers"
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_TOSHIBA) += pata_picco
- obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
- obj-$(CONFIG_PATA_VIA) += pata_via.o
- obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
-+obj-$(CONFIG_PATA_FSL) += pata_fsl.o
-
- # SFF PIO only
- obj-$(CONFIG_PATA_AT32) += pata_at32.o
---- /dev/null
-+++ b/drivers/ata/pata_fsl.c
-@@ -0,0 +1,844 @@
-+/*
-+ * Freescale integrated PATA driver
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Description:
-+ * This driver is for Coldfire MCF54455 on-chip ATA module.
-+ *
-+ * This is free software; you can redistribute it and/or modify it
-+ * under the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at
-+ * your option) any later version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/blkdev.h>
-+#include <scsi/scsi_host.h>
-+#include <linux/ata.h>
-+#include <linux/libata.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+#include <asm/mcf_edma.h>
-+#endif
-+#include <asm/pata_fsl.h>
-+
-+#define DRV_NAME "pata_fsl"
-+#define DRV_VERSION "1.0"
-+
-+#ifdef CONFIG_M54455
-+#define WRITE_ATA8(val, reg) \
-+ __raw_writeb(val, (ata_regs + reg));
-+#define WRITE_ATA16(val, reg) \
-+ __raw_writew(val, (ata_regs + reg));
-+#else
-+#define WRITE_ATA8(val, reg) \
-+ __raw_writel(val, (ata_regs + reg));
-+#define WRITE_ATA16(val, reg) \
-+ __raw_writel(val, (ata_regs + reg));
-+#endif
-+
-+#define MAX_FSL_SG 256 /* MCF_EDMA_TCD_PER_CHAN */
-+
-+struct pata_fsl_priv {
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ int ultra;
-+#endif
-+ u8 *fsl_ata_regs;
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ int dma_rchan;
-+ int dma_wchan;
-+ int dma_done;
-+ int dma_dir;
-+#if 0
-+ int nsg;
-+ struct fsl_edma_requestbuf reqbuf[MAX_FSL_SG];
-+#endif
-+#endif
-+};
-+
-+enum {
-+ /* various constants */
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ FSL_ATA_MAX_SG_LEN = 65534,
-+#endif
-+
-+ /* offsets to registers */
-+
-+ FSL_ATA_TIMING_REGS = 0x00,
-+ FSL_ATA_FIFO_FILL = 0x20,
-+ FSL_ATA_CONTROL = 0x24,
-+ FSL_ATA_INT_PEND = 0x28,
-+ FSL_ATA_INT_EN = 0x2C,
-+ FSL_ATA_INT_CLEAR = 0x30,
-+ FSL_ATA_FIFO_ALARM = 0x34,
-+ FSL_ATA_DRIVE_DATA = 0xA0,
-+ FSL_ATA_DRIVE_CONTROL = 0xD8,
-+
-+ /* bits within FSL_ATA_CONTROL */
-+
-+ FSL_ATA_CTRL_FIFO_RST_B = 0x80,
-+ FSL_ATA_CTRL_ATA_RST_B = 0x40,
-+ FSL_ATA_CTRL_FIFO_TX_EN = 0x20,
-+ FSL_ATA_CTRL_FIFO_RCV_EN = 0x10,
-+ FSL_ATA_CTRL_DMA_PENDING = 0x08,
-+ FSL_ATA_CTRL_DMA_ULTRA = 0x04,
-+ FSL_ATA_CTRL_DMA_WRITE = 0x02,
-+ FSL_ATA_CTRL_IORDY_EN = 0x01,
-+
-+ /* bits within the interrupt control registers */
-+
-+ FSL_ATA_INTR_ATA_INTRQ1 = 0x80,
-+ FSL_ATA_INTR_FIFO_UNDERFLOW = 0x40,
-+ FSL_ATA_INTR_FIFO_OVERFLOW = 0x20,
-+ FSL_ATA_INTR_CTRL_IDLE = 0x10,
-+ FSL_ATA_INTR_ATA_INTRQ2 = 0x08,
-+};
-+
-+/*
-+ * This structure contains the timing parameters for
-+ * ATA bus timing in the 5 PIO modes. The timings
-+ * are in nanoseconds, and are converted to clock
-+ * cycles before being stored in the ATA controller
-+ * timing registers.
-+ */
-+static struct {
-+ short t0, t1, t2_8, t2_16, t2i, t4, t9, tA;
-+} pio_specs[] = {
-+ [0] = {
-+ .t0 = 600, .t1 = 70, .t2_8 = 290, .t2_16 = 165, .t2i = 0,
-+ .t4 = 30, .t9 = 20, .tA = 50
-+ },
-+ [1] = {
-+ .t0 = 383, .t1 = 50, .t2_8 = 290, .t2_16 = 125, .t2i = 0,
-+ .t4 = 20, .t9 = 15, .tA = 50
-+ },
-+ [2] = {
-+ .t0 = 240, .t1 = 30, .t2_8 = 290, .t2_16 = 100, .t2i = 0,
-+ .t4 = 15, .t9 = 10, .tA = 50
-+ },
-+ [3] = {
-+ .t0 = 180, .t1 = 30, .t2_8 = 80, .t2_16 = 80, .t2i = 0,
-+ .t4 = 10, .t9 = 10, .tA = 50
-+ },
-+ [4] = {
-+ .t0 = 120, .t1 = 25, .t2_8 = 70, .t2_16 = 70, .t2i = 0,
-+ .t4 = 10, .t9 = 10, .tA = 50
-+ },
-+};
-+
-+#define NR_PIO_SPECS (sizeof pio_specs / sizeof pio_specs[0])
-+
-+/*
-+ * This structure contains the timing parameters for
-+ * ATA bus timing in the 3 MDMA modes. The timings
-+ * are in nanoseconds, and are converted to clock
-+ * cycles before being stored in the ATA controller
-+ * timing registers.
-+ */
-+static struct {
-+ short t0M, tD, tH, tJ, tKW, tM, tN, tJNH;
-+} mdma_specs[] = {
-+ [0] = {
-+ .t0M = 480, .tD = 215, .tH = 20, .tJ = 20, .tKW = 215,
-+ .tM = 50, .tN = 15, .tJNH = 20
-+ },
-+ [1] = {
-+ .t0M = 150, .tD = 80, .tH = 15, .tJ = 5, .tKW = 50,
-+ .tM = 30, .tN = 10, .tJNH = 15
-+ },
-+ [2] = {
-+ .t0M = 120, .tD = 70, .tH = 10, .tJ = 5, .tKW = 25,
-+ .tM = 25, .tN = 10, .tJNH = 10
-+ },
-+};
-+
-+#define NR_MDMA_SPECS (sizeof mdma_specs / sizeof mdma_specs[0])
-+
-+/*
-+ * This structure contains the timing parameters for
-+ * ATA bus timing in the 6 UDMA modes. The timings
-+ * are in nanoseconds, and are converted to clock
-+ * cycles before being stored in the ATA controller
-+ * timing registers.
-+ */
-+static struct {
-+ short t2CYC, tCYC, tDS, tDH, tDVS, tDVH, tCVS, tCVH, tFS_min, tLI_max,
-+ tMLI, tAZ, tZAH, tENV_min, tSR, tRFS, tRP, tACK, tSS, tDZFS;
-+} udma_specs[] = {
-+ [0] = {
-+ .t2CYC = 235, .tCYC = 114, .tDS = 15, .tDH = 5, .tDVS = 70,
-+ .tDVH = 6, .tCVS = 70, .tCVH = 6, .tFS_min = 0,
-+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+ .tENV_min = 20, .tSR = 50, .tRFS = 75, .tRP = 160,
-+ .tACK = 20, .tSS = 50, .tDZFS = 80
-+ },
-+ [1] = {
-+ .t2CYC = 156, .tCYC = 75, .tDS = 10, .tDH = 5, .tDVS = 48,
-+ .tDVH = 6, .tCVS = 48, .tCVH = 6, .tFS_min = 0,
-+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+ .tENV_min = 20, .tSR = 30, .tRFS = 70, .tRP = 125,
-+ .tACK = 20, .tSS = 50, .tDZFS = 63
-+ },
-+ [2] = {
-+ .t2CYC = 117, .tCYC = 55, .tDS = 7, .tDH = 5, .tDVS = 34,
-+ .tDVH = 6, .tCVS = 34, .tCVH = 6, .tFS_min = 0,
-+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+ .tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100,
-+ .tACK = 20, .tSS = 50, .tDZFS = 47
-+ },
-+ [3] = {
-+ .t2CYC = 86, .tCYC = 39, .tDS = 7, .tDH = 5, .tDVS = 20,
-+ .tDVH = 6, .tCVS = 20, .tCVH = 6, .tFS_min = 0,
-+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+ .tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100,
-+ .tACK = 20, .tSS = 50, .tDZFS = 35
-+ },
-+ [4] = {
-+ .t2CYC = 57, .tCYC = 25, .tDS = 5, .tDH = 5, .tDVS = 7,
-+ .tDVH = 6, .tCVS = 7, .tCVH = 6, .tFS_min = 0,
-+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+ .tENV_min = 20, .tSR = 50, .tRFS = 60, .tRP = 100,
-+ .tACK = 20, .tSS = 50, .tDZFS = 25
-+ },
-+ [5] = {
-+ .t2CYC = 38, .tCYC = 17, .tDS = 4, .tDH = 5, .tDVS = 5,
-+ .tDVH = 6, .tCVS = 10, .tCVH = 10, .tFS_min = 0,
-+ .tLI_max = 75, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+ .tENV_min = 20, .tSR = 20, .tRFS = 50, .tRP = 85,
-+ .tACK = 20, .tSS = 50, .tDZFS = 40
-+ },
-+};
-+
-+#define NR_UDMA_SPECS (sizeof udma_specs / sizeof udma_specs[0])
-+
-+struct fsl_ata_time_regs {
-+ u8 time_off, time_on, time_1, time_2w;
-+ u8 time_2r, time_ax, time_pio_rdx, time_4;
-+ u8 time_9, time_m, time_jn, time_d;
-+ u8 time_k, time_ack, time_env, time_rpx;
-+ u8 time_zah, time_mlix, time_dvh, time_dzfs;
-+ u8 time_dvs, time_cvh, time_ss, time_cyc;
-+} __packed;
-+
-+
-+static void update_timing_config(struct fsl_ata_time_regs *tp,
-+ struct ata_host *host)
-+{
-+ u32 __iomem *lp = (u32 __iomem *)tp;
-+ struct pata_fsl_priv *priv = host->private_data;
-+ u32 __iomem *ctlp = (u32 __iomem *)priv->fsl_ata_regs;
-+ int i;
-+
-+ /*
-+ * JKM - this could have endianess issues on BE depending
-+ * on how the controller is glued to the bus -- probably
-+ * should rewrite this to write byte at a time.
-+ */
-+ for (i = 0; i < 6; i++) {
-+ __raw_writel(*lp, ctlp);
-+ lp++;
-+ ctlp++;
-+ }
-+}
-+
-+/*!
-+ * Calculate values for the ATA bus timing registers and store
-+ * them into the hardware.
-+ *
-+ * @param xfer_mode specifies XFER xfer_mode
-+ * @param pdev specifies platform_device
-+ *
-+ * @return EINVAL speed out of range, or illegal mode
-+ */
-+static int set_ata_bus_timing(u8 xfer_mode, struct platform_device *pdev)
-+{
-+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+ pdev->dev.platform_data;
-+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
-+
-+ /* get the bus clock cycle time, in ns */
-+ int T = 1 * 1000 * 1000 * 1000 / plat->get_clk_rate();
-+ struct fsl_ata_time_regs tr = {0};
-+ DPRINTK("clk_rate = %d T = %d\n", plat->get_clk_rate(), T);
-+
-+ /*
-+ * every mode gets the same t_off and t_on
-+ */
-+ tr.time_off = 3;
-+ tr.time_on = 3;
-+
-+ if (xfer_mode >= XFER_UDMA_0) {
-+ int speed = xfer_mode - XFER_UDMA_0;
-+ if (speed >= NR_UDMA_SPECS)
-+ return -EINVAL;
-+
-+ tr.time_ack = (udma_specs[speed].tACK + T) / T;
-+ tr.time_env = (udma_specs[speed].tENV_min + T) / T;
-+ tr.time_rpx = (udma_specs[speed].tRP + T) / T + 2;
-+
-+ tr.time_zah = (udma_specs[speed].tZAH + T) / T;
-+ tr.time_mlix = (udma_specs[speed].tMLI + T) / T;
-+ tr.time_dvh = (udma_specs[speed].tDVH + T) / T + 1;
-+ tr.time_dzfs = (udma_specs[speed].tDZFS + T) / T;
-+
-+ tr.time_dvs = (udma_specs[speed].tDVS + T) / T;
-+ tr.time_cvh = (udma_specs[speed].tCVH + T) / T;
-+ tr.time_ss = (udma_specs[speed].tSS + T) / T;
-+ tr.time_cyc = (udma_specs[speed].tCYC + T) / T;
-+ } else if (xfer_mode >= XFER_MW_DMA_0) {
-+ int speed = xfer_mode - XFER_MW_DMA_0;
-+ if (speed >= NR_MDMA_SPECS)
-+ return -EINVAL;
-+
-+ tr.time_m = (mdma_specs[speed].tM + T) / T;
-+ tr.time_jn = (mdma_specs[speed].tJNH + T) / T;
-+ tr.time_d = (mdma_specs[speed].tD + T) / T;
-+
-+ tr.time_k = (mdma_specs[speed].tKW + T) / T;
-+ } else {
-+ int speed = xfer_mode - XFER_PIO_0;
-+ if (speed >= NR_PIO_SPECS)
-+ return -EINVAL;
-+
-+ tr.time_1 = (pio_specs[speed].t1 + T) / T;
-+ tr.time_2w = (pio_specs[speed].t2_8 + T) / T;
-+
-+ tr.time_2r = (pio_specs[speed].t2_8 + T) / T;
-+ tr.time_ax = (pio_specs[speed].tA + T) / T + 2;
-+ tr.time_pio_rdx = 1;
-+ tr.time_4 = (pio_specs[speed].t4 + T) / T;
-+
-+ tr.time_9 = (pio_specs[speed].t9 + T) / T;
-+ }
-+
-+ update_timing_config(&tr, host);
-+
-+ return 0;
-+}
-+
-+static void pata_fsl_set_piomode(struct ata_port *ap, struct ata_device *adev)
-+{
-+ set_ata_bus_timing(adev->pio_mode, to_platform_device(ap->dev));
-+}
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+static void pata_fsl_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-+{
-+ struct pata_fsl_priv *priv = ap->host->private_data;
-+
-+ priv->ultra = adev->dma_mode >= XFER_UDMA_0;
-+
-+ set_ata_bus_timing(adev->dma_mode, to_platform_device(ap->dev));
-+}
-+#endif
-+
-+static int pata_fsl_port_start(struct ata_port *ap)
-+{
-+ return 0;
-+}
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+
-+static irqreturn_t dma_callback(int channel, void *arg)
-+{
-+ struct ata_port *ap = arg;
-+ struct pata_fsl_priv *priv = ap->host->private_data;
-+ u8 __iomem *ata_regs = priv->fsl_ata_regs;
-+
-+ mcf_edma_stop_transfer(channel);
-+ priv->dma_done = 1;
-+ /*
-+ * DMA is finished, so unmask INTRQ from the drive to allow the
-+ * normal ISR to fire.
-+ */
-+#if 0
-+ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
-+#else
-+ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
-+ WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL);
-+#endif
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void pata_fsl_bmdma_setup(struct ata_queued_cmd *qc)
-+{
-+ int chan;
-+ int dma_ultra;
-+ u8 ata_control;
-+ struct ata_port *ap = qc->ap;
-+ struct pata_fsl_priv *priv = ap->host->private_data;
-+ u8 __iomem *ata_regs = priv->fsl_ata_regs;
-+#if 0
-+ struct scatterlist *sg;
-+ struct fsl_edma_requestbuf *pbuf;
-+ unsigned int si;
-+#endif
-+ DPRINTK("ENTER\n");
-+
-+ /* reset the ATA FIFO first */
-+ /*
-+ WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B,FSL_ATA_CONTROL);
-+ */
-+ priv->dma_dir = qc->dma_dir;
-+
-+ /*
-+ * Configure the on-chip ATA interface hardware.
-+ */
-+ dma_ultra = priv->ultra ?
-+ FSL_ATA_CTRL_DMA_ULTRA : 0;
-+
-+ ata_control = FSL_ATA_CTRL_FIFO_RST_B |
-+ FSL_ATA_CTRL_ATA_RST_B |
-+ FSL_ATA_CTRL_DMA_PENDING |
-+ dma_ultra;
-+
-+ if (qc->dma_dir == DMA_TO_DEVICE) {
-+ chan = priv->dma_wchan;
-+ ata_control |= FSL_ATA_CTRL_FIFO_TX_EN |
-+ FSL_ATA_CTRL_DMA_WRITE;
-+ } else {
-+ chan = priv->dma_rchan;
-+ ata_control |= FSL_ATA_CTRL_FIFO_RCV_EN;
-+ }
-+#if 0
-+ __raw_writel(ata_control, ata_regs + FSL_ATA_CONTROL);
-+ __raw_writel(plat->fifo_alarm, ata_regs + FSL_ATA_FIFO_ALARM);
-+ __raw_writel(FSL_ATA_INTR_ATA_INTRQ1, ata_regs + FSL_ATA_INT_EN);
-+#else
-+ WRITE_ATA8(ata_control, FSL_ATA_CONTROL);
-+ WRITE_ATA8(16/*plat->fifo_alarm*/, FSL_ATA_FIFO_ALARM);
-+ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ1, FSL_ATA_INT_EN);
-+#endif
-+ /*mb();*/
-+
-+ /*
-+ * Set up the DMA completion callback.
-+ */
-+ /*
-+ * Copy the sg list to an array.
-+ */
-+#if 0
-+ priv->nsg = 0;
-+ pbuf = priv->reqbuf;
-+
-+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
-+
-+ /*dma_map_sg(NULL, sg, 1, priv->dma_dir); */
-+
-+ if (priv->dma_dir == DMA_TO_DEVICE) { /* WRITE */
-+ pbuf->saddr = sg->dma_address;
-+ pbuf->daddr = (dma_addr_t)(priv->fsl_ata_regs + 0x18);
-+ pbuf->soff = 4;
-+ pbuf->doff = 0;
-+ } else { /* Read */
-+ pbuf->daddr = sg->dma_address;
-+ pbuf->saddr = (dma_addr_t)(priv->fsl_ata_regs + 0x18);
-+ pbuf->doff = 4;
-+ pbuf->soff = 0;
-+ }
-+ pbuf->attr = MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+ |MCF_EDMA_TCD_ATTR_DSIZE_32BIT;
-+ pbuf->minor_loop = 16*4; /* 16 longwords per request*/
-+ pbuf->len = sg_dma_len(sg);
-+
-+ pbuf++;
-+ priv->nsg++;
-+ }
-+
-+ BUG_ON(*(unsigned char *)(ata_regs + FSL_ATA_FIFO_FILL));
-+ mcf_edma_sg_config(chan, priv->reqbuf, priv->nsg);
-+#else
-+ if (priv->dma_dir == DMA_TO_DEVICE) {
-+ mcf_edma_sglist_config(chan, qc->sg, qc->n_elem, priv->dma_dir,
-+ (dma_addr_t)
-+ ((io_ata_virt2phys((void *)priv->fsl_ata_regs)) + 0x18),
-+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+ 4, 0, 8*4);
-+ } else {
-+
-+ mcf_edma_sglist_config(chan, qc->sg, qc->n_elem, priv->dma_dir,
-+ (dma_addr_t)
-+ ((io_ata_virt2phys((void *)priv->fsl_ata_regs)) + 0x18),
-+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+ 0, 4, 8*4);
-+ }
-+
-+#endif
-+ priv->dma_done = 0;
-+
-+ DPRINTK("EXIT\n");
-+
-+}
-+
-+static void pata_fsl_bmdma_start(struct ata_queued_cmd *qc)
-+{
-+ struct ata_port *ap = qc->ap;
-+ struct pata_fsl_priv *priv = ap->host->private_data;
-+ int chan;
-+
-+ /*
-+ * Start the channel.
-+ */
-+ chan = qc->dma_dir == DMA_TO_DEVICE ? priv->dma_wchan : priv->dma_rchan;
-+
-+ mcf_edma_enable_transfer(chan);
-+
-+ ap->ops->sff_exec_command(ap, &qc->tf);
-+}
-+
-+static void pata_fsl_bmdma_stop(struct ata_queued_cmd *qc)
-+{
-+ struct ata_port *ap = qc->ap;
-+/*
-+ int chan;
-+
-+ chan = qc->dma_dir == DMA_TO_DEVICE ? priv->dma_wchan : priv->dma_rchan;
-+ mcf_edma_stop_transfer(chan);
-+*/
-+/* do a dummy read as in ata_bmdma_stop */
-+ ata_sff_dma_pause(ap);
-+}
-+
-+static u8 pata_fsl_bmdma_status(struct ata_port *ap)
-+{
-+ struct pata_fsl_priv *priv = ap->host->private_data;
-+
-+ return priv->dma_done ? ATA_DMA_INTR : 0;
-+}
-+
-+static void pata_fsl_dma_init(struct ata_port *ap)
-+{
-+ struct pata_fsl_priv *priv = ap->host->private_data;
-+
-+ priv->dma_rchan = -1;
-+ priv->dma_wchan = -1;
-+
-+ priv->dma_rchan = mcf_edma_request_channel(MCF_EDMA_CHAN_ATA_RX,
-+ dma_callback,
-+ NULL, 0x6,
-+ (void *)ap,
-+ NULL,
-+ "MCF ATA RX");
-+ if (priv->dma_rchan < 0) {
-+ dev_printk(KERN_ERR, ap->dev, "couldn't get RX DMA channel\n");
-+ goto err_out;
-+ }
-+
-+ priv->dma_wchan = mcf_edma_request_channel(MCF_EDMA_CHAN_ATA_TX,
-+ dma_callback,
-+ NULL, 0x6,
-+ (void *)ap,
-+ NULL,
-+ "MCF ATA TX");
-+ if (priv->dma_wchan < 0) {
-+ dev_printk(KERN_ERR, ap->dev, "couldn't get TX DMA channel\n");
-+ goto err_out;
-+ }
-+
-+ dev_printk(KERN_ERR, ap->dev, "rchan=%d wchan=%d\n", priv->dma_rchan,
-+ priv->dma_wchan);
-+ return;
-+
-+err_out:
-+ ap->mwdma_mask = 0;
-+ ap->udma_mask = 0;
-+ mcf_edma_free_channel(priv->dma_rchan, ap);
-+ mcf_edma_free_channel(priv->dma_wchan, ap);
-+ kfree(priv);
-+}
-+#endif /* CONFIG_FSL_PATA_USE_DMA */
-+
-+static void ata_dummy_noret(struct ata_port *ap) { return; }
-+
-+static struct scsi_host_template pata_fsl_sht = {
-+ ATA_BMDMA_SHT(DRV_NAME),
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ .sg_tablesize = MAX_FSL_SG,
-+ .dma_boundary = ATA_DMA_BOUNDARY,
-+#endif
-+};
-+
-+static struct ata_port_operations pata_fsl_port_ops = {
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ .inherits = &ata_bmdma_port_ops,
-+#else
-+ .inherits = &ata_sff_port_ops,
-+#endif
-+ .set_piomode = pata_fsl_set_piomode,
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ .set_dmamode = pata_fsl_set_dmamode,
-+#endif
-+ .cable_detect = ata_cable_40wire,
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ .bmdma_setup = pata_fsl_bmdma_setup,
-+ .bmdma_start = pata_fsl_bmdma_start,
-+#endif
-+
-+ .sff_data_xfer = ata_sff_data_xfer_noirq,
-+ .qc_prep = ata_noop_qc_prep,
-+
-+ .port_start = pata_fsl_port_start,
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ .bmdma_stop = pata_fsl_bmdma_stop,
-+ .bmdma_status = pata_fsl_bmdma_status,
-+#endif
-+};
-+
-+static void fsl_setup_port(struct ata_ioports *ioaddr)
-+{
-+ unsigned int shift = 2;
-+
-+ ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift);
-+ ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift);
-+ ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
-+ ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift);
-+ ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift);
-+ ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift);
-+ ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift);
-+ ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift);
-+ ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift);
-+ ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift);
-+}
-+
-+/**
-+ * pata_fsl_probe - attach a platform interface
-+ * @pdev: platform device
-+ *
-+ * Register a platform bus integrated ATA host controller
-+ *
-+ * The 3 platform device resources are used as follows:
-+ *
-+ * - I/O Base (IORESOURCE_MEM) virt. addr. of ATA controller regs
-+ * - CTL Base (IORESOURCE_MEM) unused
-+ * - IRQ (IORESOURCE_IRQ) platform IRQ assigned to ATA
-+ *
-+ */
-+static int __devinit pata_fsl_probe(struct platform_device *pdev)
-+{
-+ struct resource *io_res;
-+ struct ata_host *host;
-+ struct ata_port *ap;
-+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+ pdev->dev.platform_data;
-+ struct pata_fsl_priv *priv;
-+ u8 *ata_regs;
-+ int ret;
-+
-+ DPRINTK("ENTER\n");
-+ /*
-+ * Get an ata_host structure for this device
-+ */
-+ host = ata_host_alloc(&pdev->dev, 1);
-+ if (!host)
-+ return -ENOMEM;
-+ ap = host->ports[0];
-+ /*
-+ * Allocate private data
-+ */
-+ priv = kzalloc(sizeof(struct pata_fsl_priv), GFP_KERNEL);
-+ if (priv == NULL) {
-+ /* free(host); */
-+ return -ENOMEM;
-+ }
-+ host->private_data = priv;
-+
-+ /*
-+ * Set up resources
-+ */
-+ if (unlikely(pdev->num_resources != 3)) {
-+ dev_err(&pdev->dev, "invalid number of resources\n");
-+ return -EINVAL;
-+ }
-+
-+ io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ ata_regs = (u8 *)io_res->start;
-+ priv->fsl_ata_regs = ata_regs;
-+ ap->ioaddr.cmd_addr = (void *)(ata_regs + FSL_ATA_DRIVE_DATA);
-+ ap->ioaddr.ctl_addr = (void *)(ata_regs + FSL_ATA_DRIVE_CONTROL);
-+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
-+ ap->ops = &pata_fsl_port_ops;
-+ ap->pio_mask = 0x3F;
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ ap->mwdma_mask = 0x07;
-+ ap->udma_mask = 0x1F;
-+/* ap->udma_mask = plat->udma_mask; */
-+/* pata_fsl_sht.sg_tablesize = plat->max_sg; */
-+#else
-+ ap->mwdma_mask = 0x00;
-+ ap->udma_mask = 0x00;
-+#endif
-+ fsl_setup_port(&ap->ioaddr);
-+
-+ /*
-+ * Do platform-specific initialization (e.g. allocate pins,
-+ * turn on clock). After this call it is assumed that
-+ * plat->get_clk_rate() can be called to calculate
-+ * timing.
-+ */
-+ if (plat->init && plat->init(pdev)) {
-+ /* REVISIT: don't leak what ata_host_alloc() allocated */
-+ return -ENODEV;
-+ }
-+
-+ /* Deassert the reset bit to enable the interface */
-+ WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL);
-+
-+ /* Set initial timing and mode */
-+ set_ata_bus_timing(XFER_PIO_4, pdev);
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+ /* get DMA ready */
-+ pata_fsl_dma_init(ap);
-+#endif
-+
-+ /*
-+ * Enable the ATA INTRQ interrupt from the bus, but
-+ * only allow the CPU to see it (INTRQ2) at this point.
-+ * INTRQ1, which goes to the DMA, will be enabled later.
-+ */
-+#if 0
-+ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
-+#else
-+ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
-+#endif
-+
-+ /* activate */
-+ ret = ata_host_activate(host, platform_get_irq(pdev, 0),
-+ ata_sff_interrupt, 0, &pata_fsl_sht);
-+ DPRINTK("EXIT ret=%d\n", ret);
-+ return ret;
-+}
-+
-+/**
-+ * pata_fsl_remove - unplug a platform interface
-+ * @pdev: platform device
-+ *
-+ * A platform bus ATA device has been unplugged. Perform the needed
-+ * cleanup. Also called on module unload for any active devices.
-+ */
-+static int __devexit pata_fsl_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ata_host *host = dev_get_drvdata(dev);
-+ struct pata_fsl_priv *priv = host->private_data;
-+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+ pdev->dev.platform_data;
-+ u8 *ata_regs = priv->fsl_ata_regs;
-+
-+#if 0
-+ __raw_writel(0, ata_regs + FSL_ATA_INT_EN); /* Disable interrupts */
-+#else
-+ WRITE_ATA8(0, FSL_ATA_INT_EN); /* Disable interrupts */
-+#endif
-+
-+ ata_host_detach(host);
-+
-+ if (plat->exit)
-+ plat->exit();
-+
-+ kfree(priv);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int pata_fsl_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
-+ struct pata_fsl_priv *priv = host->private_data;
-+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+ pdev->dev.platform_data;
-+ u8 *ata_regs = priv->fsl_ata_regs;
-+
-+ /* Disable interrupts. */
-+#if 0
-+ __raw_writel(0, ata_regs + FSL_ATA_INT_EN);
-+#else
-+ WRITE_ATA8(0, FSL_ATA_INT_EN);
-+#endif
-+
-+ if (plat->exit)
-+ plat->exit();
-+
-+ return 0;
-+}
-+
-+static int pata_fsl_resume(struct platform_device *pdev)
-+{
-+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
-+ struct pata_fsl_priv *priv = host->private_data;
-+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+ pdev->dev.platform_data;
-+ u8 *ata_regs = priv->fsl_ata_regs;
-+
-+ if (plat->init && plat->init(pdev))
-+ return -ENODEV;
-+ /* Deassert the reset bit to enable the interface */
-+#if 0
-+ __raw_writel(FSL_ATA_CTRL_ATA_RST_B, ata_regs + FSL_ATA_CONTROL);
-+#else
-+ WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL);
-+#endif
-+
-+ /* Set initial timing and mode */
-+ set_ata_bus_timing(XFER_PIO_4, pdev);
-+
-+ /*
-+ * Enable hardware interrupts.
-+ */
-+#if 0
-+ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
-+#else
-+ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
-+#endif
-+
-+ return 0;
-+}
-+#endif
-+
-+static struct platform_driver pata_fsl_driver = {
-+ .probe = pata_fsl_probe,
-+ .remove = __devexit_p(pata_fsl_remove),
-+#ifdef CONFIG_PM
-+ .suspend = pata_fsl_suspend,
-+ .resume = pata_fsl_resume,
-+#endif
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init pata_fsl_init(void)
-+{
-+ int ret;
-+
-+ DPRINTK("ENTER\n");
-+ ret = platform_driver_register(&pata_fsl_driver);
-+ DPRINTK("EXIT ret=%d\n", ret);
-+ return ret;
-+}
-+
-+static void __exit pata_fsl_exit(void)
-+{
-+ platform_driver_unregister(&pata_fsl_driver);
-+}
-+module_init(pata_fsl_init);
-+module_exit(pata_fsl_exit);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("low-level driver for Freescale ATA");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
diff --git a/target/linux/coldfire/patches/038-Add-PCI-Framebuffer-support-for-Silicon-Motion-s-Lyn.patch b/target/linux/coldfire/patches/038-Add-PCI-Framebuffer-support-for-Silicon-Motion-s-Lyn.patch
deleted file mode 100644
index bd04629..0000000
--- a/target/linux/coldfire/patches/038-Add-PCI-Framebuffer-support-for-Silicon-Motion-s-Lyn.patch
+++ /dev/null
@@ -1,1287 +0,0 @@
-From d984818481320cf4a1b44cefbc99448205cc7673 Mon Sep 17 00:00:00 2001
-From: Jingchang Lu <b35083@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:48 +0800
-Subject: [PATCH 38/52] Add PCI Framebuffer support for Silicon Motion's Lynx family
-
-The driver may support SM710, SM712, SM720, and the SM712
-has been tested on ColdFire M547X_8XEVB.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
-Signed-off-by: Jingchang Lu <b35083@freescale.com>
----
- drivers/video/Kconfig | 15 +
- drivers/video/Makefile | 1 +
- drivers/video/console/bitblit.c | 12 +
- drivers/video/console/fbcon.c | 4 +
- drivers/video/fbmem.c | 2 +-
- drivers/video/smifb.c | 963 +++++++++++++++++++++++++++++++++++++++
- drivers/video/smifb.h | 150 ++++++
- include/linux/fb.h | 18 +-
- 8 files changed, 1163 insertions(+), 2 deletions(-)
- create mode 100644 drivers/video/smifb.c
- create mode 100644 drivers/video/smifb.h
-
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -204,6 +204,7 @@ config FB_WMT_GE_ROPS
- config FB_DEFERRED_IO
- bool
- depends on FB
-+ default y
-
- config FB_HECUBA
- tristate
-@@ -262,6 +263,20 @@ config FB_TILEBLITTING
- comment "Frame buffer hardware drivers"
- depends on FB
-
-+config FB_SMI
-+ tristate "Silicon Motion Lynx support"
-+ depends on FB && PCI
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ ---help---
-+ This enables support for the Silicon Motion Lynx family of graphic
-+ chips.
-+
-+ The SM712 has been tested on ColdFire M547X_8Xevb.
-+
-+ If unsure, say N.
-+
- config FB_CIRRUS
- tristate "Cirrus Logic support"
- depends on FB && (ZORRO || PCI)
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_FB_DEFERRED_IO) += fb_def
- obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o
-
- # Hardware specific drivers go first
-+obj-$(CONFIG_FB_SMI) += smifb.o
- obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
- obj-$(CONFIG_FB_ARC) += arcfb.o
- obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
---- a/drivers/video/console/bitblit.c
-+++ b/drivers/video/console/bitblit.c
-@@ -79,7 +79,11 @@ static inline void bit_putcs_aligned(str
- u32 d_pitch, u32 s_pitch, u32 cellsize,
- struct fb_image *image, u8 *buf, u8 *dst)
- {
-+#ifndef CONFIG_COLDFIRE
- u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#else
-+ u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#endif
- u32 idx = vc->vc_font.width >> 3;
- u8 *src;
-
-@@ -112,7 +116,11 @@ static inline void bit_putcs_unaligned(s
- struct fb_image *image, u8 *buf,
- u8 *dst)
- {
-+#ifndef CONFIG_COLDFIRE
- u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#else
-+ u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#endif
- u32 shift_low = 0, mod = vc->vc_font.width % 8;
- u32 shift_high = 8;
- u32 idx = vc->vc_font.width >> 3;
-@@ -239,7 +247,11 @@ static void bit_cursor(struct vc_data *v
- {
- struct fb_cursor cursor;
- struct fbcon_ops *ops = info->fbcon_par;
-+#ifndef CONFIG_COLDFIRE
- unsigned short charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#else
-+ unsigned long charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#endif
- int w = DIV_ROUND_UP(vc->vc_font.width, 8), c;
- int y = real_y(ops->p, vc->vc_y);
- int attribute, use_sw = (vc->vc_cursor_type & 0x10);
---- a/drivers/video/console/fbcon.c
-+++ b/drivers/video/console/fbcon.c
-@@ -2636,7 +2636,11 @@ static int fbcon_set_palette(struct vc_d
- {
- struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
- int i, j, k, depth;
-+#ifndef CONFIG_COLDFIRE
- u8 val;
-+#else
-+ u32 val;
-+#endif
-
- if (fbcon_is_inactive(vc, info))
- return -EINVAL;
---- a/drivers/video/fbmem.c
-+++ b/drivers/video/fbmem.c
-@@ -1433,7 +1433,7 @@ static int fb_check_foreignness(struct f
-
- fi->flags &= ~FBINFO_FOREIGN_ENDIAN;
-
--#ifdef __BIG_ENDIAN
-+#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE)
- fi->flags |= foreign_endian ? 0 : FBINFO_BE_MATH;
- #else
- fi->flags |= foreign_endian ? FBINFO_BE_MATH : 0;
---- /dev/null
-+++ b/drivers/video/smifb.c
-@@ -0,0 +1,963 @@
-+/***************************************************************************
-+ smifb.c - Silicon Motion, Inc. LynxEM+ frame buffer device
-+ -------------------
-+ begin : Thu Aug 9 2001
-+ copyright : (C) 2001 by Szu-Tao Huang
-+ email : johuang@siliconmotion.com
-+ ***************************************************************************/
-+/* Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.*/
-+/***************************************************************************
-+ * *
-+ * This program is free software; you can redistribute it and/or modify *
-+ * it under the terms of the GNU General Public License as published by *
-+ * the Free Software Foundation; either version 2 of the License, or *
-+ * (at your option) any later version. *
-+ * *
-+ ***************************************************************************/
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/tty.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/fb.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+#include <asm/pgtable.h>
-+#include <asm/system.h>
-+#include <linux/uaccess.h>
-+
-+#include "console/fbcon.h"
-+
-+/*
-+#include <video/fbcon.h>
-+#include <video/fbcon-cfb8.h>
-+#include <video/fbcon-cfb16.h>
-+#include <video/fbcon-cfb24.h>
-+*/
-+
-+#include <linux/fb.h>
-+/*point to virtual Memory Map IO starting address*/
-+static char *SMIRegs;
-+/*point to virtual video memory starting address*/
-+static char *SMILFB;
-+/*used to record hardware information*/
-+static struct par_info hw;
-+#ifdef DEBUG_FB
-+#define debug_printk(x...) printk(x)
-+#else
-+#define debug_printk(x...)
-+#endif
-+#include "smifb.h"
-+
-+struct ModeInit VGAMode[numVGAModes] = {
-+ {
-+ /* mode#0: 640 x 480 8Bpp 60Hz */
-+ 640, 480, 8, 60,
-+ /* Init_MISC */
-+ 0xE3,
-+ { /* Init_SR0_SR4 */
-+ 0x03, 0x01, 0x0F, 0x00, 0x0E,
-+ },
-+ { /* Init_SR10_SR24 */
-+ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xC4, 0x30, 0x02, 0x01, 0x01,
-+ },
-+ { /* Init_SR30_SR75 */
-+ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
-+ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
-+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
-+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
-+ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
-+ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
-+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
-+ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
-+ },
-+ { /* Init_SR80_SR93 */
-+ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
-+ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
-+ 0x00, 0x00, 0x00, 0x00,
-+ },
-+ { /* Init_SRA0_SRAF */
-+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
-+ },
-+ { /* Init_GR00_GR08 */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+ 0xFF,
-+ },
-+ { /* Init_AR00_AR14 */
-+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+ 0x41, 0x00, 0x0F, 0x00, 0x00,
-+ },
-+ { /* Init_CR00_CR18 */
-+ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
-+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
-+ 0xFF,
-+ },
-+ { /* Init_CR30_CR4D */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
-+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
-+ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
-+ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
-+ },
-+ { /* Init_CR90_CRA7 */
-+ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
-+ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
-+ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
-+ },
-+ },
-+ {
-+ /* mode#1: 640 x 480 16Bpp 60Hz */
-+ 640, 480, 16, 60,
-+ /* Init_MISC */
-+ 0xE3,
-+ { /* Init_SR0_SR4 */
-+ 0x03, 0x01, 0x0F, 0x00, 0x0E,
-+ },
-+ { /* Init_SR10_SR24 */
-+ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xC4, 0x30, 0x02, 0x01, 0x01,
-+ },
-+ { /* Init_SR30_SR75 */
-+ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
-+ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
-+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
-+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
-+ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
-+ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
-+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
-+ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
-+ },
-+ { /* Init_SR80_SR93 */
-+ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
-+ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
-+ 0x00, 0x00, 0x00, 0x00,
-+ },
-+ { /* Init_SRA0_SRAF */
-+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
-+ },
-+ { /* Init_GR00_GR08 */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+ 0xFF,
-+ },
-+ { /* Init_AR00_AR14 */
-+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+ 0x41, 0x00, 0x0F, 0x00, 0x00,
-+ },
-+ { /* Init_CR00_CR18 */
-+ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
-+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
-+ 0xFF,
-+ },
-+ { /* Init_CR30_CR4D */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
-+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
-+ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
-+ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
-+ },
-+ { /* Init_CR90_CRA7 */
-+ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
-+ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
-+ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
-+ },
-+ },
-+ {
-+ /* mode#2: 640 x 480 24Bpp 60Hz */
-+ 640, 480, 24, 60,
-+ /* Init_MISC */
-+ 0xE3,
-+ { /* Init_SR0_SR4 */
-+ 0x03, 0x01, 0x0F, 0x00, 0x0E,
-+ },
-+ { /* Init_SR10_SR24 */
-+ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xC4, 0x30, 0x02, 0x01, 0x01,
-+ },
-+ { /* Init_SR30_SR75 */
-+ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
-+ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
-+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
-+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
-+ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
-+ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
-+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
-+ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
-+ },
-+ { /* Init_SR80_SR93 */
-+ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
-+ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
-+ 0x00, 0x00, 0x00, 0x00,
-+ },
-+ { /* Init_SRA0_SRAF */
-+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
-+ },
-+ { /* Init_GR00_GR08 */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+ 0xFF,
-+ },
-+ { /* Init_AR00_AR14 */
-+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+ 0x41, 0x00, 0x0F, 0x00, 0x00,
-+ },
-+ { /* Init_CR00_CR18 */
-+ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
-+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
-+ 0xFF,
-+ },
-+ { /* Init_CR30_CR4D */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
-+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
-+ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
-+ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
-+ },
-+ { /* Init_CR90_CRA7 */
-+ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
-+ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
-+ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
-+ },
-+ },
-+ {/* mode#3: 800 x 600 8Bpp 60Hz */
-+ 800, 600, 8, 60,
-+ 0x2B, /* Init_MISC */
-+ { /* Init_SR0_SR4 */
-+ 0x03, 0x01, 0x0F, 0x03, 0x0E,
-+ },
-+ { /* Init_SR10_SR24 */
-+ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+ 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xC4, 0x30, 0x02, 0x01, 0x01,
-+ },
-+ { /* Init_SR30_SR75 */
-+ 0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24,
-+ 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF,
-+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC,
-+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24,
-+ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
-+ 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24,
-+ 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
-+ 0x02, 0x45, 0x30, 0x35, 0x40, 0x20,
-+ },
-+ { /* Init_SR80_SR93 */
-+ 0xFF, 0x87, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24,
-+ 0x90, 0x01, 0x2C, 0x01, 0xFF, 0x00, 0x24, 0x24,
-+ 0x00, 0x00, 0x00, 0x00,
-+ },
-+ { /* Init_SRA0_SRAF */
-+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
-+ },
-+ { /* Init_GR00_GR08 */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+ 0xFF,
-+ },
-+ { /* Init_AR00_AR14 */
-+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+ 0x41, 0x00, 0x0F, 0x00, 0x00,
-+ },
-+ { /* Init_CR00_CR18 */
-+ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
-+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
-+ 0xFF,
-+ },
-+ { /* Init_CR30_CR4D */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
-+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
-+ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
-+ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
-+ },
-+ { /* Init_CR90_CRA7 */
-+ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
-+ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
-+ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
-+ },
-+ },
-+ {/* mode#4: 800 x 600 16Bpp 60Hz */
-+ 800, 600, 16, 60,
-+ /* Init_MISC */
-+ 0x2B,
-+ { /* Init_SR0_SR4 */
-+ 0x03, 0x01, 0x0F, 0x03, 0x0E,
-+ },
-+ { /* Init_SR10_SR24 */
-+ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+ 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xC4, 0x30, 0x02, 0x01, 0x01,
-+ },
-+ { /* Init_SR30_SR75 */
-+ 0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24,
-+ 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF,
-+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC,
-+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24,
-+ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
-+ 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24,
-+ 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
-+ 0x02, 0x45, 0x30, 0x35, 0x40, 0x20,
-+ },
-+ { /* Init_SR80_SR93 */
-+ 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24,
-+ 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24,
-+ 0x00, 0x00, 0x00, 0x00,
-+ },
-+ { /* Init_SRA0_SRAF */
-+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
-+ },
-+ { /* Init_GR00_GR08 */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+ 0xFF,
-+ },
-+ { /* Init_AR00_AR14 */
-+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+ 0x41, 0x00, 0x0F, 0x00, 0x00,
-+ },
-+ { /* Init_CR00_CR18 */
-+ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
-+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
-+ 0xFF,
-+ },
-+ { /* Init_CR30_CR4D */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
-+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
-+ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
-+ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
-+ },
-+ { /* Init_CR90_CRA7 */
-+ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
-+ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
-+ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
-+ },
-+ },
-+ {/* mode#5: 800 x 600 24Bpp 60Hz */
-+ 800, 600, 24, 60,
-+ 0x2B,
-+ { /* Init_SR0_SR4 */
-+ 0x03, 0x01, 0x0F, 0x03, 0x0E,
-+ },
-+ { /* Init_SR10_SR24 */
-+ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0xC4, 0x30, 0x02, 0x01, 0x01,
-+ },
-+ { /* Init_SR30_SR75 */
-+ 0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36,
-+ 0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF,
-+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
-+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36,
-+ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
-+ 0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36,
-+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
-+ 0x02, 0x45, 0x30, 0x30, 0x40, 0x20,
-+ },
-+ { /* Init_SR80_SR93 */
-+ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36,
-+ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36,
-+ 0x00, 0x00, 0x00, 0x00,
-+ },
-+ { /* Init_SRA0_SRAF */
-+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
-+ },
-+ { /* Init_GR00_GR08 */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+ 0xFF,
-+ },
-+ { /* Init_AR00_AR14 */
-+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+ 0x41, 0x00, 0x0F, 0x00, 0x00,
-+ },
-+ { /* Init_CR00_CR18 */
-+ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
-+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
-+ 0xFF,
-+ },
-+ { /* Init_CR30_CR4D */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
-+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
-+ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
-+ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
-+ },
-+ { /* Init_CR90_CRA7 */
-+ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
-+ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
-+ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
-+ },
-+ },
-+};
-+
-+static void smi_set_timing(struct smifb_info *sfb, struct par_info *hw)
-+{
-+ int i = 0, j = 0;
-+ u32 m_nScreenStride;
-+ debug_printk("set timing:hw->width %x,hw->height %x,bpp %x\n",
-+ hw->width, hw->height, sfb->fb.var.bits_per_pixel);
-+
-+ for (j = 0; j < numVGAModes; j++) {
-+ if (VGAMode[j].mmSizeX == hw->width &&
-+ VGAMode[j].mmSizeY == hw->height &&
-+ VGAMode[j].bpp == sfb->fb.var.bits_per_pixel &&
-+ VGAMode[j].hz == hw->hz) {
-+ debug_printk("VGAMode[%d]\n", j);
-+ smi_mmiowb(0x0, 0x3c6);
-+
-+ smi_seqw(0, 0x1);
-+
-+ smi_mmiowb(VGAMode[j].Init_MISC, 0x3c2);
-+
-+ for (i = 0; i < SIZE_SR00_SR04; i++) {
-+ /* init SEQ register SR00 - SR04 */
-+ smi_seqw(i,
-+ VGAMode[j].Init_SR00_SR04[i]);
-+ }
-+
-+ for (i = 0; i < SIZE_SR10_SR24; i++) {
-+ /* init SEQ register SR10 - SR24*/
-+ smi_seqw(i + 0x10,
-+ VGAMode[j].Init_SR10_SR24[i]);
-+ }
-+
-+ for (i = 0; i < SIZE_SR30_SR75; i++) {
-+ /* init SEQ register SR30 - SR75*/
-+ if (((i + 0x30) != 0x62) &&
-+ ((i + 0x30) != 0x6a) &&
-+ ((i + 0x30) != 0x6b))
-+ smi_seqw(i + 0x30,
-+ VGAMode[j].Init_SR30_SR75[i]);
-+ }
-+ for (i = 0; i < SIZE_SR80_SR93; i++) {
-+ /* init SEQ register SR80 - SR93*/
-+ smi_seqw(i + 0x80,
-+ VGAMode[j].Init_SR80_SR93[i]);
-+ }
-+ for (i = 0; i < SIZE_SRA0_SRAF; i++) {
-+ /* init SEQ register SRA0 - SRAF */
-+ smi_seqw(i + 0xa0,
-+ VGAMode[j].Init_SRA0_SRAF[i]);
-+ }
-+
-+ for (i = 0; i < SIZE_GR00_GR08; i++) {
-+ /* init Graphic register GR00 - GR08*/
-+ smi_grphw(i,
-+ VGAMode[j].Init_GR00_GR08[i]);
-+ }
-+
-+ for (i = 0; i < SIZE_AR00_AR14; i++) {
-+ /* init Attribute register AR00 - AR14*/
-+ smi_attrw(i,
-+ VGAMode[j].Init_AR00_AR14[i]);
-+ }
-+
-+ for (i = 0; i < SIZE_CR00_CR18; i++) {
-+ /* init CRTC register CR00 - CR18 */
-+ smi_crtcw(i,
-+ VGAMode[j].Init_CR00_CR18[i]);
-+ }
-+
-+ for (i = 0; i < SIZE_CR30_CR4D; i++) {
-+ /* init CRTC register CR30 - CR4D*/
-+ smi_crtcw(i + 0x30,
-+ VGAMode[j].Init_CR30_CR4D[i]);
-+ }
-+
-+ for (i = 0; i < SIZE_CR90_CRA7; i++) {
-+ /*init CRTC register CR90 - CRA7*/
-+ smi_crtcw(i + 0x90,
-+ VGAMode[j].Init_CR90_CRA7[i]);
-+ }
-+ }
-+ }
-+ smi_mmiowb(0x67, 0x3c2);
-+ /* set VPR registers */
-+ writel(0x0, hw->m_pVPR+0x0C);
-+ writel(0x0, hw->m_pVPR+0x40);
-+ /* set data width */
-+ m_nScreenStride = (hw->width * sfb->fb.var.bits_per_pixel) / 64;
-+ switch (sfb->fb.var.bits_per_pixel) {
-+ case 8:
-+ writel(0x0, hw->m_pVPR+0x0);
-+ break;
-+ case 16:
-+ writel(0x00020000, hw->m_pVPR+0x0);
-+ break;
-+ case 24:
-+ writel(0x00040000, hw->m_pVPR+0x0);
-+ break;
-+ }
-+ writel((u32)(((m_nScreenStride + 2) << 16) |
-+ m_nScreenStride), hw->m_pVPR+0x10);
-+}
-+
-+/*
-+ * Set the color palette
-+ */
-+static int
-+smifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+ u_int trans, struct fb_info *info)
-+{
-+ struct smifb_info *sfb = (struct smifb_info *)info;
-+ u32 *pal;
-+
-+ switch (sfb->fb.fix.visual) {
-+ case FB_VISUAL_TRUECOLOR: /* RGB 5:6:5 True Colour */
-+ pal = sfb->fb.pseudo_palette;
-+ /* System has 16 default color */
-+ if (regno >= 16)
-+ return 1;
-+
-+ pal[regno] = (red & 0xf800) |
-+ ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * smifb_decode_var():
-+ * Get the video params out of 'var'. If a value doesn't fit, round it up,
-+ * if it's too big, return -EINVAL.
-+ *
-+ * Suggestion: Round up in the following order: bits_per_pixel, xres,
-+ * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
-+ * bitfields, horizontal timing, vertical timing.
-+ */
-+static int smifb_decode_var(struct fb_var_screeninfo *var,
-+ struct smifb_info *sfb, struct par_info *hw)
-+{
-+ hw->width = var->xres;
-+ hw->height = var->yres;
-+ hw->hz = 60;
-+
-+ return 0;
-+}
-+
-+static int smifb_set_par(struct fb_info *info)
-+{
-+ struct smifb_info *sfb = (struct smifb_info *)info;
-+ int err, chgvar = 0;
-+ struct fb_var_screeninfo *var = &info->var;
-+ struct fb_cmap *cmap;
-+
-+
-+ /*
-+ * Decode var contents into a par structure, adjusting any
-+ * out of range values.
-+ */
-+ err = smifb_decode_var(var, sfb, &hw);
-+ if (err)
-+ return err;
-+
-+ if (hw.width != var->xres)
-+ chgvar = 1;
-+ if (hw.height != var->yres)
-+ chgvar = 1;
-+
-+ var->activate &= ~FB_ACTIVATE_ALL;
-+
-+ smi_set_timing(sfb, &hw);
-+
-+ sfb->palette_size = var->bits_per_pixel == 8 ? 256 : 16;
-+ cmap = (struct fb_cmap *)fb_default_cmap(sfb->palette_size);
-+ fb_set_cmap(cmap, &sfb->fb);
-+
-+ return 0;
-+}
-+
-+static int smifb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ var->bits_per_pixel += 7;
-+ var->bits_per_pixel &= ~7;
-+
-+ var->xres_virtual =
-+ var->xres_virtual < var->xres ? var->xres : var->xres_virtual;
-+ var->yres_virtual =
-+ var->yres_virtual < var->yres ? var->yres : var->yres_virtual;
-+ debug_printk("var->bits_per_pixel %x\n", var->bits_per_pixel);
-+ switch (var->bits_per_pixel) {
-+ case 8:
-+ case 16: /* RGB 565 */
-+ case 24:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (var->bits_per_pixel) {
-+ case 16:
-+ var->red.offset = 11;
-+ var->red.length = 5;
-+ var->green.offset = 5;
-+ var->green.length = 6;
-+ var->blue.offset = 0;
-+ var->blue.length = 5;
-+
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+ info->fix.line_length = var->xres * 2;
-+
-+ break;
-+ default:
-+ return -EINVAL;
-+ /* We don't support anything other than 16bpp for now. --NL */
-+ break;
-+ }
-+ return 0;
-+
-+ /*smifb_set_color_bitfields(var);*/
-+
-+ return 0;
-+}
-+
-+/*
-+ * Formal definition of the VESA spec:
-+ * On
-+ * This refers to the state of the display when it is in full operation
-+ * Stand-By
-+ * This defines an optional operating state of minimal power reduction with
-+ * the shortest recovery time
-+ * Suspend
-+ * This refers to a level of power management in which substantial power
-+ * reduction is achieved by the display. The display can have a longer
-+ * recovery time from this state than from the Stand-by state
-+ * Off
-+ * This indicates that the display is consuming the lowest level of power
-+ * and is non-operational. Recovery from this state may optionally require
-+ * the user to manually power on the monitor
-+ *
-+ * Now, the fbdev driver adds an additional state, (blank), where they
-+ * turn off the video (maybe by colormap tricks), but don't mess with the
-+ * video itself: think of it semantically between on and Stand-By.
-+ *
-+ * So here's what we should do in our fbdev blank routine:
-+ *
-+ * VESA_NO_BLANKING (mode 0) Video on, front/back light on
-+ * VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off
-+ * VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off
-+ * VESA_POWERDOWN (mode 3) Video off, front/back light off
-+ *
-+ * This will match the matrox implementation.
-+ */
-+/*
-+ * smifb_blank():
-+ * Blank the display by setting all palette values to zero. Note, the
-+ * 12 and 16 bpp modes don't really use the palette, so this will not
-+ * blank the display in all modes.
-+ */
-+static int smifb_blank(int blank, struct fb_info *info)
-+{
-+/* struct smifb_info *sfb = (struct smifb_info *)info; */
-+#if 0
-+ switch (blank) {
-+ case VESA_POWERDOWN:
-+ case VESA_VSYNC_SUSPEND:
-+ case VESA_HSYNC_SUSPEND:
-+ case VESA_NO_BLANKING:
-+ }
-+#endif
-+ return 1;
-+}
-+
-+static struct fb_ops smifb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = smifb_check_var,
-+ .fb_set_par = smifb_set_par,
-+ .fb_setcolreg = smifb_setcolreg,
-+ .fb_blank = smifb_blank,
-+
-+ /* Accelerated functions, using softversions, per se */
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+ .fb_cursor = soft_cursor,
-+};
-+
-+/*
-+ * Alloc struct smifb_info and assign the default value
-+ */
-+static struct smifb_info * __devinit
-+smi_alloc_fb_info(struct pci_dev *dev, char *name)
-+{
-+ struct smifb_info *sfb;
-+
-+ sfb = kmalloc(sizeof(struct smifb_info) + sizeof(u32) * 16, GFP_KERNEL);
-+
-+ if (!sfb)
-+ return NULL;
-+
-+ memset(sfb, 0, sizeof(struct smifb_info));
-+
-+ sfb->currcon = -1;
-+ sfb->dev = dev;
-+
-+ strcpy(sfb->fb.fix.id, name);
-+
-+ sfb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
-+ sfb->fb.fix.type_aux = 0;
-+ sfb->fb.fix.xpanstep = 0;
-+ sfb->fb.fix.ypanstep = 0;
-+ sfb->fb.fix.ywrapstep = 0;
-+ sfb->fb.fix.accel = FB_ACCEL_NONE;
-+
-+ sfb->fb.var.nonstd = 0;
-+ sfb->fb.var.activate = FB_ACTIVATE_NOW;
-+ sfb->fb.var.height = -1;
-+ sfb->fb.var.width = -1;
-+ sfb->fb.var.accel_flags = 0;
-+ sfb->fb.var.vmode = FB_VMODE_NONINTERLACED;
-+
-+ sfb->fb.fbops = &smifb_ops;
-+ sfb->fb.flags = FBINFO_FLAG_DEFAULT;
-+ sfb->fb.node = -1;
-+ sfb->fb.pseudo_palette = (void *)(&sfb->palette_size + 1);
-+
-+ return sfb;
-+}
-+
-+/*
-+ * Unmap in the memory mapped IO registers
-+ *
-+ */
-+
-+static void __devinit
-+smi_unmap_mmio(struct smifb_info *sfb)
-+{
-+ if (sfb && SMILFB) {
-+ iounmap(SMILFB);
-+ SMIRegs = NULL;
-+ }
-+}
-+
-+/*
-+ * Map in the screen memory
-+ *
-+ */
-+static int __devinit
-+smi_map_smem(struct smifb_info *sfb, struct pci_dev *dev, u_long smem_len)
-+{
-+ sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
-+ sfb->fb.fix.smem_len = smem_len;
-+
-+ debug_printk("%s:smem %x,len %x\n", __func__,
-+ sfb->fb.fix.smem_start,
-+ sfb->fb.fix.smem_len);
-+
-+ sfb->fb.screen_base = SMILFB;
-+
-+ if (!sfb->fb.screen_base) {
-+ printk("%s: unable to map screen memory\n", sfb->fb.fix.id);
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Unmap in the screen memory
-+ *
-+ */
-+static void __devinit
-+smi_unmap_smem(struct smifb_info *sfb)
-+{
-+ if (sfb && sfb->fb.screen_base) {
-+ iounmap(sfb->fb.screen_base);
-+ sfb->fb.screen_base = NULL;
-+ }
-+}
-+
-+/*
-+ * We need to wake up the LynxEM+, and make sure its in linear memory mode.
-+ */
-+static inline void __devinit
-+smi_init_hw(void)
-+{
-+ /* The delays prevent the ColdFire PCI host from locking up. :/ --NL */
-+ udelay(1000);
-+ outb(0x18, 0x3c4);
-+
-+ udelay(1000);
-+ outb(0x11, 0x3c5);
-+ udelay(1000);
-+
-+ debug_printk("%s: 0x3c4 =%x 0x3c5 %x\n",
-+ __func__, inw(0x3c4), inw(0x3c5));
-+}
-+
-+static void __devinit
-+smi_free_fb_info(struct smifb_info *sfb)
-+{
-+ if (sfb) {
-+ fb_alloc_cmap(&sfb->fb.cmap, 0, 0);
-+ kfree(sfb);
-+ }
-+}
-+
-+
-+u16 SMI_ChipIDs[numChipIDs] = {0x710, 0x712, 0x720};
-+
-+int __devinit smifb_init(struct pci_dev *pdev, const struct pci_device_id *ent)
-+{
-+ struct smifb_info *sfb;
-+ unsigned long smem_size;
-+ char name[16];
-+ int err;
-+ char *m_pLAW;
-+ unsigned long m_pLAWPhysical;
-+
-+ debug_printk("%s start\n", __func__);
-+ sprintf(name, "smifb");
-+ hw.chipID = pdev->device;
-+ err = -ENOMEM;
-+ sfb = smi_alloc_fb_info(pdev, name);
-+ if (!sfb)
-+ goto failed;
-+
-+ smi_init_hw();
-+
-+ /* Map address and memory detection */
-+ m_pLAWPhysical = pci_resource_start(pdev, 0);
-+ printk(KERN_INFO "%s:Physical addr %x,hw.chipID %x\n",
-+ __func__, (unsigned int)m_pLAWPhysical,
-+ (unsigned int)hw.chipID);
-+ switch (hw.chipID) {
-+ case 0x710:
-+ case 0x712:
-+ sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x00700000;
-+ sfb->fb.fix.mmio_len = 0x00100000;
-+
-+ hw.m_pLFB = SMILFB =
-+ ioremap(m_pLAWPhysical, 0x00800000);
-+ debug_printk("%s:SMILFB%x\n", __func__, SMILFB);
-+ hw.m_pMMIO = SMIRegs = SMILFB + 0x00700000;
-+ hw.m_pDPR = hw.m_pLFB + 0x00408000;
-+ hw.m_pVPR = hw.m_pLFB + 0x0040c000;
-+
-+ if (!SMIRegs) {
-+ printk(KERN_ERR "%s: unable to map "
-+ "memory mapped IO\n", sfb->fb.fix.id);
-+ return -ENOMEM;
-+ }
-+
-+ smi_seqw(0x62, 0x7A);
-+ smi_seqw(0x6a, 0x0c);
-+ smi_seqw(0x6b, 0x02);
-+ smem_size = 0x00400000;
-+
-+ /* LynxEM+ memory dection */
-+ *(u32 *)(SMILFB + 4) = 0xAA551133;
-+ if (*(u32 *)(SMILFB + 4) != 0xAA551133) {
-+ smem_size = 0x00200000;
-+ /* Program the MCLK to 130 MHz */
-+ smi_seqw(0x6a, 0x12);
-+ smi_seqw(0x6b, 0x02);
-+ smi_seqw(0x62, 0x3e);
-+ }
-+ break;
-+ case 0x720:
-+ sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x000c0000;
-+ sfb->fb.fix.mmio_len = 0x00040000;
-+
-+ m_pLAW = ioremap(m_pLAWPhysical, 0x00a00000);
-+ hw.m_pLFB = SMILFB = m_pLAW + 0x00200000;
-+ hw.m_pMMIO = SMIRegs = m_pLAW + 0x000c0000;
-+ hw.m_pDPR = m_pLAW;
-+ hw.m_pVPR = m_pLAW + 0x800;
-+
-+ smi_seqw(0x62, 0xff);
-+ smi_seqw(0x6a, 0x0d);
-+ smi_seqw(0x6b, 0x02);
-+ smem_size = 0x00400000;
-+
-+ break;
-+ }
-+
-+ sfb->fb.var.xres = 640;
-+ sfb->fb.var.yres = 480;
-+ sfb->fb.var.bits_per_pixel = 16;
-+
-+ sfb->fb.var.xres_virtual = sfb->fb.var.xres;
-+
-+ sfb->fb.var.yres_virtual = sfb->fb.var.yres;
-+
-+ sfb->fb.flags = FBINFO_FLAG_DEFAULT;
-+
-+ debug_printk("%s:smem_size %x\n", __func__, smem_size);
-+ err = smi_map_smem(sfb, pdev, smem_size);
-+ debug_printk("%s:smi_map_smem error %x\n", __func__, err);
-+ if (err)
-+ goto failed;
-+
-+ fb_set_var(&sfb->fb, &sfb->fb.var);
-+ smifb_check_var(&sfb->fb.var, &sfb->fb);
-+ smifb_set_par((struct fb_info *)sfb);
-+ debug_printk("%s:register_framebuffer\n", __func__);
-+ err = register_framebuffer(&sfb->fb);
-+ if (err < 0)
-+ goto failed;
-+
-+ printk(KERN_INFO "Silicon Motion, Inc. "
-+ "LynxEM+ Init complete.\n");
-+ return 0;
-+
-+failed:
-+ smi_unmap_smem(sfb);
-+ smi_unmap_mmio(sfb);
-+ smi_free_fb_info(sfb);
-+ printk(KERN_INFO "Silicon Motion, Inc. "
-+ "LynxEM+ Init FAILED.n");
-+
-+ return err;
-+}
-+
-+static DEFINE_PCI_DEVICE_TABLE(smifb_pci_tbl) = {
-+ { 0x126f, 0x710, PCI_ANY_ID, PCI_ANY_ID },
-+ { 0x126f, 0x712, PCI_ANY_ID, PCI_ANY_ID },
-+ { 0x126f, 0x720, PCI_ANY_ID, PCI_ANY_ID },
-+ { 0 }
-+};
-+
-+MODULE_DEVICE_TABLE(pci, smifb_pci_tbl);
-+
-+struct pci_driver smifb_driver = {
-+ .name = "smifb",
-+ .id_table = smifb_pci_tbl,
-+ .probe = smifb_init,
-+};
-+
-+int __init smi_init(void)
-+{
-+ /*return pci_module_init(&smifb_driver);*/
-+ return pci_register_driver(&smifb_driver);
-+}
-+
-+module_init(smi_init);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/video/smifb.h
-@@ -0,0 +1,150 @@
-+/***************************************************************************
-+ smifb.h - SiliconMotion LynxEM+ frame buffer device
-+ -------------------
-+ begin : Thu Aug 9 2001
-+ copyright : (C) 2001 by Szu-Tao Huang
-+ email : johuang@siliconmotion.com
-+ ***************************************************************************/
-+/* Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.*/
-+/***************************************************************************
-+ * *
-+ * This program is free software; you can redistribute it and/or modify *
-+ * it under the terms of the GNU General Public License as published by *
-+ * the Free Software Foundation; either version 2 of the License, or *
-+ * (at your option) any later version. *
-+ * *
-+ ***************************************************************************/
-+
-+#define smi_mmiowb(dat, reg) writeb(dat, SMIRegs + reg)
-+#define smi_mmioww(dat, reg) writew(dat, SMIRegs + reg)
-+#define smi_mmiowl(dat, reg) writel(dat, SMIRegs + reg)
-+
-+#define smi_mmiorb(reg) readb(SMIRegs + reg)
-+#define smi_mmiorw(reg) readw(SMIRegs + reg)
-+#define smi_mmiorl(reg) readl(SMIRegs + reg)
-+
-+#define SIZE_SR00_SR04 (0x04 - 0x00 + 1)
-+#define SIZE_SR10_SR24 (0x24 - 0x10 + 1)
-+#define SIZE_SR30_SR75 (0x75 - 0x30 + 1)
-+#define SIZE_SR80_SR93 (0x93 - 0x80 + 1)
-+#define SIZE_SRA0_SRAF (0xAF - 0xA0 + 1)
-+#define SIZE_GR00_GR08 (0x08 - 0x00 + 1)
-+#define SIZE_AR00_AR14 (0x14 - 0x00 + 1)
-+#define SIZE_CR00_CR18 (0x18 - 0x00 + 1)
-+#define SIZE_CR30_CR4D (0x4D - 0x30 + 1)
-+#define SIZE_CR90_CRA7 (0xA7 - 0x90 + 1)
-+#define SIZE_VPR (0x6C + 1)
-+#define SIZE_DPR (0x44 + 1)
-+
-+#define numVGAModes 6
-+#define numChipIDs 3
-+
-+#define NR_PALETTE 256
-+#define NR_RGB 2
-+
-+/*
-+ * Minimum X and Y resolutions
-+ */
-+#define MIN_XRES 640
-+#define MIN_YRES 480
-+
-+static inline void smi_crtcw(int reg, int val)
-+{
-+ smi_mmiowb(reg, 0x3d4);
-+ smi_mmiowb(val, 0x3d5);
-+}
-+
-+static inline unsigned int smi_crtcr(int reg)
-+{
-+ smi_mmiowb(reg, 0x3d4);
-+ return smi_mmiorb(0x3d5);
-+}
-+
-+static inline void smi_grphw(int reg, int val)
-+{
-+ smi_mmiowb(reg, 0x3ce);
-+ smi_mmiowb(val, 0x3cf);
-+}
-+
-+static inline unsigned int smi_grphr(int reg)
-+{
-+ smi_mmiowb(reg, 0x3ce);
-+ return smi_mmiorb(0x3cf);
-+}
-+
-+static inline void smi_attrw(int reg, int val)
-+{
-+ smi_mmiorb(0x3da);
-+ smi_mmiowb(reg, 0x3c0);
-+ smi_mmiorb(0x3c1);
-+ smi_mmiowb(val, 0x3c0);
-+}
-+
-+static inline void smi_seqw(int reg, int val)
-+{
-+ smi_mmiowb(reg, 0x3c4);
-+ smi_mmiowb(val, 0x3c5);
-+}
-+
-+static inline unsigned int smi_seqr(int reg)
-+{
-+ smi_mmiowb(reg, 0x3c4);
-+ return smi_mmiorb(0x3c5);
-+}
-+/*
-+* Private structure
-+*/
-+struct smifb_info {
-+ /*
-+ * The following is a pointer to be passed into the
-+ * functions below. The modules outside the main
-+ * smifb.c driver have no knowledge as to what
-+ * is within this structure.
-+ */
-+ struct fb_info fb;
-+ struct display_switch *dispsw;
-+ struct pci_dev *dev;
-+ signed int currcon;
-+
-+ struct {
-+ u8 red, green, blue;
-+ } palette[NR_RGB];
-+
-+ u_int palette_size;
-+};
-+
-+struct par_info {
-+ /*
-+ * Hardware
-+ */
-+ u16 chipID;
-+ char *m_pLFB;
-+ char *m_pMMIO;
-+ char *m_pDPR;
-+ char *m_pVPR;
-+
-+ u_int width;
-+ u_int height;
-+ u_int hz;
-+};
-+
-+/*The next structure holds all information relevant for
-+ *a specific video mode.
-+ */
-+struct ModeInit {
-+ int mmSizeX;
-+ int mmSizeY;
-+ int bpp;
-+ int hz;
-+ unsigned char Init_MISC;
-+ unsigned char Init_SR00_SR04[SIZE_SR00_SR04];
-+ unsigned char Init_SR10_SR24[SIZE_SR10_SR24];
-+ unsigned char Init_SR30_SR75[SIZE_SR30_SR75];
-+ unsigned char Init_SR80_SR93[SIZE_SR80_SR93];
-+ unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF];
-+ unsigned char Init_GR00_GR08[SIZE_GR00_GR08];
-+ unsigned char Init_AR00_AR14[SIZE_AR00_AR14];
-+ unsigned char Init_CR00_CR18[SIZE_CR00_CR18];
-+ unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D];
-+ unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7];
-+};
---- a/include/linux/fb.h
-+++ b/include/linux/fb.h
-@@ -935,6 +935,19 @@ static inline struct apertures_struct *a
- #define fb_memcpy_fromfb sbus_memcpy_fromio
- #define fb_memcpy_tofb sbus_memcpy_toio
-
-+#elif defined(CONFIG_COLDFIRE)
-+#define fb_readb readb
-+#define fb_readw readw
-+#define fb_readl readl
-+#define fb_readq readq
-+#define fb_writeb writeb
-+#define fb_writew writew
-+#define fb_writel writel
-+#define fb_writeq writeq
-+#define fb_memset memset_io
-+#define fb_memcpy_fromfb memcpy_fromio
-+#define fb_memcpy_tofb memcpy_toio
-+
- #elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__)
-
- #define fb_readb __raw_readb
-@@ -1045,6 +1058,9 @@ extern int fb_deferred_io_fsync(struct f
-
- static inline bool fb_be_math(struct fb_info *info)
- {
-+#if defined(CONFIG_COLDFIRE)
-+ return false;
-+#endif
- #ifdef CONFIG_FB_FOREIGN_ENDIAN
- #if defined(CONFIG_FB_BOTH_ENDIAN)
- return info->flags & FBINFO_BE_MATH;
-@@ -1054,7 +1070,7 @@ static inline bool fb_be_math(struct fb_
- return false;
- #endif /* CONFIG_FB_BOTH_ENDIAN */
- #else
--#ifdef __BIG_ENDIAN
-+#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE)
- return true;
- #else
- return false;
diff --git a/target/linux/coldfire/patches/039-Add-PCI-bus-driver-for-M54455EVB-and-M547X_8X.patch b/target/linux/coldfire/patches/039-Add-PCI-bus-driver-for-M54455EVB-and-M547X_8X.patch
deleted file mode 100644
index 6b462fe..0000000
--- a/target/linux/coldfire/patches/039-Add-PCI-bus-driver-for-M54455EVB-and-M547X_8X.patch
+++ /dev/null
@@ -1,3051 +0,0 @@
-From 3f21ef5f7b72937a1ae293e8ba6ebd0bb0b175e3 Mon Sep 17 00:00:00 2001
-From: Jingchang Lu <b35083@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:49 +0800
-Subject: [PATCH 39/52] Add PCI bus driver for M54455EVB and M547X_8X
-
-Signed-off-by: Jingchang Lu <b35083@freescale.com>
----
- arch/m68k/coldfire/m5445x/devices.c | 9 +
- arch/m68k/coldfire/m5445x/mcf5445x-pci.c | 721 +++++++++++++++++++++
- arch/m68k/coldfire/m5445x/pci.c | 247 +++++++
- arch/m68k/coldfire/m547x/pci.c | 1023 ++++++++++++++++++++++++++++++
- arch/m68k/coldfire/m547x/pci_dummy.S | 45 ++
- arch/m68k/include/asm/5445x_pci.h | 111 ++++
- arch/m68k/include/asm/548x_pci.h | 99 +++
- arch/m68k/include/asm/pci.h | 6 +
- arch/m68k/kernel/bios32_mcf548x.c | 632 ++++++++++++++++++
- drivers/pci/Makefile | 1 +
- drivers/pci/access.c | 18 +
- drivers/pci/setup-bus.c | 6 +
- lib/iomap.c | 4 +
- 13 files changed, 2922 insertions(+), 0 deletions(-)
- create mode 100644 arch/m68k/coldfire/m5445x/mcf5445x-pci.c
- create mode 100644 arch/m68k/coldfire/m5445x/pci.c
- create mode 100644 arch/m68k/coldfire/m547x/pci.c
- create mode 100644 arch/m68k/coldfire/m547x/pci_dummy.S
- create mode 100644 arch/m68k/include/asm/5445x_pci.h
- create mode 100644 arch/m68k/include/asm/548x_pci.h
- create mode 100644 arch/m68k/kernel/bios32_mcf548x.c
-
---- a/arch/m68k/coldfire/m5445x/devices.c
-+++ b/arch/m68k/coldfire/m5445x/devices.c
-@@ -25,12 +25,15 @@
- #include <linux/spi/mmc_spi.h>
- #endif
-
-+#include <linux/pci.h>
-+
- #include <asm/coldfire.h>
- #include <asm/mcfsim.h>
- #include <asm/mcfuart.h>
- #include <asm/mcfqspi.h>
- #include <asm/mcfdspi.h>
- #include <asm/cf_io.h>
-+#include <asm/pci.h>
-
- /* ATA Interrupt */
- #define IRQ_ATA (64 + 64 + 54)
-@@ -517,6 +520,12 @@ void m5445x_uarts_init(void)
-
- static int __init init_BSP(void)
- {
-+#ifndef CONFIG_M54455_PCI_initcall
-+#if defined(CONFIG_M54455) && defined(CONFIG_PCI)
-+ pci_init();
-+ pcibios_init();
-+#endif
-+#endif
- m5445x_uarts_init();
- platform_add_devices(m5445x_devices, ARRAY_SIZE(m5445x_devices));
- return 0;
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/mcf5445x-pci.c
-@@ -0,0 +1,721 @@
-+/*
-+ * arch/m68k/coldfire/m5445x/mcf5445x-pci.c
-+ *
-+ * Coldfire M5445x specific PCI implementation.
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/pci.h>
-+
-+#include <asm/mcfsim.h>
-+#include <asm/pci.h>
-+#include <asm/irq.h>
-+#include <asm/mcf5445x_pciarb.h>
-+#include <asm/mcf5445x_pci.h>
-+#include <asm/cf_io.h>
-+/*
-+ * Layout MCF5445x to PCI memory mappings:
-+ *
-+ * WIN MCF5445x PCI TYPE
-+ * --- -------- --- ----
-+ * [0] 0xA0000000 -> 0xACFFFFFF 0xA0000000 -> 0xACFFFFFF MEM
-+ * [1] 0xAC000000 -> 0xAEFFFFFF 0xAC000000 -> 0xAEFFFFFF IO
-+ * [2] 0xAF000000 -> 0xAFFFFFFF 0xAF000000 -> 0xAFFFFFFF CONFIG
-+ */
-+
-+void __iomem *pci_mem_map;
-+unsigned long pci_mem_mapsize = 256 * 1024 * 1024;
-+
-+#define MCF5445X_PCI_MEM_BASE ((unsigned int)pci_mem_map)
-+#define MCF5445X_PCI_MEM_BASE_PHY 0xA0000000
-+#define MCF5445X_PCI_MEM_SIZE 0x0C000000
-+
-+#define MCF5445X_PCI_IO_BASE \
-+ (MCF5445X_PCI_MEM_BASE + MCF5445X_PCI_MEM_SIZE)
-+#define MCF5445X_PCI_IO_SIZE 0x03000000
-+
-+#define MCF5445X_PCI_CONFIG_BASE \
-+ (MCF5445X_PCI_IO_BASE + MCF5445X_PCI_IO_SIZE)
-+#define MCF5445X_PCI_CONFIG_SIZE 0x01000000
-+
-+#define HOST_IO_BASE \
-+ (MCF5445X_PCI_MEM_BASE + MCF5445X_PCI_MEM_SIZE)
-+#define PCI_IO_MASK (MCF5445X_PCI_IO_SIZE - 1)
-+
-+#undef DEBUG
-+#ifdef DEBUG
-+# define DBG(x...) printk(x)
-+#else
-+# define DBG(x...)
-+#endif
-+
-+/* PCI Bus memory resource block */
-+struct resource pci_iomem_resource = {
-+ .name = "PCI memory space",
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+/* PCI Bus ioport resource block */
-+struct resource pci_ioport_resource = {
-+ .name = "PCI I/O space",
-+ .flags = IORESOURCE_IO,
-+};
-+
-+/*
-+ * The M54455EVB multiplexes all the PCI interrupts via
-+ * the FPGA and routes them to a single interrupt. The
-+ * PCI spec requires all PCI interrupt routines be smart
-+ * enough to sort out their own interrupts.
-+ * The interrupt source from the FPGA is configured
-+ * to EPORT 3.
-+ */
-+#define MCF5445X_PCI_IRQ 0x43
-+
-+#define PCI_SLOTS 4
-+
-+/*
-+ * FPGA Info
-+ */
-+#define FPGA_PCI_IRQ_ENABLE (u32 *)0x09000000
-+#define FPGA_PCI_IRQ_STATUS (u32 *)0x09000004
-+#define FPGA_PCI_IRQ_ROUTE (u32 *)0x0900000c
-+#define FPGA_SEVEN_LED (u32 *)0x09000014
-+
-+
-+/*
-+ * mcf5445x_conf_device(struct pci_dev *dev)
-+ *
-+ * Machine dependent Configure the given device.
-+ *
-+ * Parameters:
-+ *
-+ * dev - the pci device.
-+ */
-+void
-+mcf5445x_conf_device(struct pci_dev *dev)
-+{
-+ set_fpga(FPGA_PCI_IRQ_ENABLE, 0x0f);
-+}
-+
-+/*
-+ * int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus,
-+ * unsigned int devfn, int reg,
-+ * u32 *value)
-+ *
-+ * Read from PCI configuration space.
-+ *
-+ */
-+int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus,
-+ unsigned int devfn, int reg, int len, u32 *value)
-+{
-+ u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) |
-+ MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) |
-+ MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) |
-+ MCF_PCI_PCICAR_DWORD(reg) |
-+ MCF_PCI_PCICAR_E;
-+
-+ if ((bus > 255) || (devfn > 255) || (reg > 255)) {
-+ *value = -1;
-+ return -EINVAL;
-+ }
-+
-+ /* setup for config mode */
-+ MCF_PCI_PCICAR = addr;
-+ __asm__ __volatile__("nop");
-+
-+ switch (len) {
-+ case 1:
-+ *value = *(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3));
-+ break;
-+ case 2:
-+ *value = le16_to_cpu(*(volatile u16 *)
-+ (MCF5445X_PCI_CONFIG_BASE + (reg&2)));
-+ break;
-+ case 4:
-+ *value = le32_to_cpu(*(volatile u32 *)
-+ (MCF5445X_PCI_CONFIG_BASE));
-+ break;
-+ }
-+
-+ /* clear config mode */
-+ MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E;
-+ __asm__ __volatile__("nop");
-+
-+ return 0;
-+}
-+
-+/*
-+ * int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus,
-+ * unsigned int devfn, int reg,
-+ * u32 *value)
-+ *
-+ * Write to PCI configuration space
-+ */
-+int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus,
-+ unsigned int devfn, int reg, int len, u32 value)
-+{
-+ u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) |
-+ MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) |
-+ MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) |
-+ MCF_PCI_PCICAR_DWORD(reg) |
-+ MCF_PCI_PCICAR_E;
-+
-+ if ((bus > 255) || (devfn > 255) || (reg > 255))
-+ return -EINVAL;
-+
-+ /* setup for config mode */
-+ MCF_PCI_PCICAR = addr;
-+ __asm__ __volatile__("nop");
-+
-+ switch (len) {
-+ case 1:
-+ *(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3)) = (u8)value;
-+ break;
-+ case 2:
-+ *(volatile u16 *)(MCF5445X_PCI_CONFIG_BASE+(reg&2)) =
-+ cpu_to_le16((u16)value);
-+ break;
-+ case 4:
-+ *(volatile u32 *)(MCF5445X_PCI_CONFIG_BASE) =
-+ cpu_to_le32(value);
-+ break;
-+ }
-+
-+ /* clear config mode */
-+ MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E;
-+ __asm__ __volatile__("nop");
-+
-+ return 0;
-+}
-+
-+/* hardware operations */
-+static struct pci_raw_ops mcf5445x_pci_ops = {
-+ .read = mcf5445x_pci_config_read,
-+ .write = mcf5445x_pci_config_write,
-+};
-+
-+/************************************************************************/
-+
-+/*
-+ * u8 pci_inb()
-+ *
-+ * Read a byte at specified address from I/O space
-+ */
-+unsigned char pci_inb(long addr)
-+{
-+ char value;
-+
-+ value = *(volatile unsigned char *) (HOST_IO_BASE |
-+ (addr & PCI_IO_MASK));
-+ DBG("PCI: inb addr=0x%08X, value=0x%02X\n", addr, value);
-+
-+ return (unsigned char) value;
-+}
-+
-+
-+/*
-+ * u16 pci_inw()
-+ *
-+ * Read a word at specified address from I/O space
-+ */
-+unsigned short pci_inw(long addr)
-+{
-+ short value;
-+ volatile unsigned short *ptr;
-+
-+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ value = le16_to_cpu(*ptr);
-+
-+ DBG("PCI: inw addr=0x%08X, value=0x%04X\n", addr, value);
-+ return (unsigned short) value;
-+}
-+
-+/*
-+ * u16 pci_raw_inw()
-+ *
-+ * Read a raw word at specified address from I/O space
-+ */
-+unsigned short pci_raw_inw(long addr)
-+{
-+ short value;
-+ volatile unsigned short *ptr;
-+
-+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ value = *ptr;
-+
-+ DBG("PCI: raw_inw addr=0x%08X, value=0x%04X\n", addr, value);
-+ return (unsigned short) value;
-+}
-+
-+/*
-+ * u32 pci_inl()
-+ *
-+ * Read a dword at specified address from I/O space
-+ */
-+unsigned long pci_inl(long addr)
-+{
-+ long value;
-+ volatile unsigned long *ptr;
-+
-+ ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ value = le32_to_cpu(*ptr);
-+
-+ DBG("PCI: inl addr=0x%08X, value=0x%08X\n", addr, value);
-+ return (unsigned long) value;
-+}
-+
-+/*
-+ * u32 pci_raw_inl()
-+ *
-+ * Read a raw dword at specified address from I/O space
-+ */
-+unsigned long pci_raw_inl(long addr)
-+{
-+ long value;
-+ volatile unsigned long *ptr;
-+
-+ ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ value = *ptr;
-+
-+ DBG("PCI: raw_inl addr=0x%08X, value=0x%08X\n", addr, value);
-+ return (unsigned long) value;
-+}
-+
-+/*
-+ * void pci_outb()
-+ *
-+ * Write a byte value at specified address to I/O space
-+ */
-+void pci_outb(unsigned char value, long addr)
-+{
-+
-+ *(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK)) \
-+ = value;
-+ DBG("PCI: outb addr=0x%08X, value=0x%02X\n", addr, value);
-+}
-+
-+
-+/*
-+ * void pci_outw()
-+ *
-+ * Write a word value at specified address to I/O space
-+ */
-+void pci_outw(volatile unsigned short value, volatile long addr)
-+{
-+ volatile unsigned short *ptr;
-+
-+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ *ptr = cpu_to_le16(value);
-+ DBG("PCI: outw addr=0x%08X, value=0x%04X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_raw_outw()
-+ *
-+ * Write a raw word value at specified address to I/O space
-+ */
-+void pci_raw_outw(volatile unsigned short value, volatile long addr)
-+{
-+ volatile unsigned short *ptr;
-+
-+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ *ptr = value;
-+ DBG("PCI: raw_outw addr=0x%08X, value=0x%04X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_outl()
-+ *
-+ * Write a long word value at specified address to I/O space
-+ */
-+void pci_outl(volatile unsigned long value, volatile long addr)
-+{
-+ volatile unsigned long *ptr;
-+
-+ ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ *ptr = cpu_to_le32(value);
-+ DBG("PCI: outl addr=0x%08X, value=0x%08X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_raw_outl()
-+ *
-+ * Write a raw long word value at specified address to I/O space
-+ */
-+void pci_raw_outl(volatile unsigned long value, volatile long addr)
-+{
-+ volatile unsigned long *ptr;
-+
-+ ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ *ptr = value;
-+ DBG("PCI: raw_outl addr=0x%08X, value=0x%08X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_insb()
-+ *
-+ * Read several byte values from specified I/O port
-+ */
-+void pci_insb(volatile unsigned char *addr, unsigned char *buf, int len)
-+{
-+ for (; len--; buf++)
-+ *buf = pci_inb((unsigned long)addr);
-+ DBG("PCI: pci_insb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+
-+/*
-+ * void pci_insw()
-+ *
-+ * Read several word values from specified I/O port
-+ */
-+void pci_insw(volatile unsigned short *addr, unsigned short *buf, int len)
-+{
-+ for (; len--; buf++)
-+ *buf = pci_inw((unsigned long)addr);
-+ DBG("PCI: pci_insw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_insl()
-+ *
-+ * Read several dword values from specified I/O port
-+ */
-+void pci_insl(volatile unsigned long *addr, unsigned long *buf, int len)
-+{
-+ for (; len--; buf++)
-+ *buf = pci_inl((unsigned long)addr);
-+ DBG("PCI: pci_insl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsb()
-+ *
-+ * Write several byte values to specified I/O port
-+ */
-+void pci_outsb(volatile unsigned char *addr, const unsigned char *buf, int len)
-+{
-+ for (; len--; buf++)
-+ pci_outb((unsigned long)addr, *buf);
-+ DBG("PCI: pci_outsb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsw()
-+ *
-+ * Write several word values to specified I/O port
-+ */
-+void
-+pci_outsw(volatile unsigned short *addr, const unsigned short *buf, int len)
-+{
-+ for (; len--; buf++)
-+ pci_outw((unsigned long)addr, *buf);
-+ DBG("PCI: pci_outsw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsl()
-+ *
-+ * Write several dword values to specified I/O port
-+ */
-+void pci_outsl(volatile unsigned long *addr, const unsigned long *buf, int len)
-+{
-+ for (; len--; buf++)
-+ pci_outl((unsigned long)addr, *buf);
-+ DBG("PCI: pci_outsl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+/*
-+ * irqreturn_t mcf5445x_pci_interrupt( int irq, void *dev)
-+ *
-+ * PCI controller interrupt handler.
-+ */
-+static irqreturn_t
-+mcf5445x_pci_interrupt(int irq, void *dev)
-+{
-+ u32 status = MCF_PCI_PCIGSCR;
-+#ifdef DEBUG
-+ printk(KERN_INFO "PCI: Controller irq status=0x%08x\n", status);
-+#endif
-+ /* clear */
-+ MCF_PCI_PCIGSCR = status;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * irqreturn_t mcf5445x_pci_arb_interrupt( int irq, void *dev)
-+ *
-+ * PCI Arbiter interrupt handler.
-+ */
-+static irqreturn_t
-+mcf5445x_pci_arb_interrupt(int irq, void *dev)
-+{
-+ u32 status = MCF_PCIARB_PASR;
-+#ifdef DEBUG
-+ printk(KERN_INFO "PCI: Arbiter irq status=0x%08x\n", status);
-+#endif
-+ /* clear */
-+ MCF_PCIARB_PASR = status;
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * struct pci_bus_info *init_mcf5445x_pci(void)
-+ *
-+ * Machine specific initialisation:
-+ *
-+ * - Allocate and initialise a 'pci_bus_info' structure
-+ * - Initialize hardware
-+ *
-+ * Result: pointer to 'pci_bus_info' structure.
-+ */
-+int __init
-+init_mcf5445x_pci(void)
-+{
-+ /*
-+ * Initialize the PCI core
-+ */
-+ printk(KERN_INFO "init_mcf5445x_pci\n");
-+
-+ /* pci memory mapping */
-+ pci_mem_map = ioremap(MCF5445X_PCI_MEM_BASE_PHY, pci_mem_mapsize);
-+ if (!pci_mem_map) {
-+ printk(KERN_ERR "PCI memory map failed by ioremap!\n");
-+ return -ENOMEM;
-+ }
-+ printk(KERN_INFO "MCF5445X_PCI_MEM_BASE value is 0x%x\n", \
-+ MCF5445X_PCI_MEM_BASE);
-+
-+ /* Initialize pci resource */
-+ pci_iomem_resource.start = MCF5445X_PCI_MEM_BASE;
-+ pci_iomem_resource.end = MCF5445X_PCI_MEM_BASE + \
-+ MCF5445X_PCI_MEM_SIZE - 1;
-+
-+ pci_ioport_resource.start = MCF5445X_PCI_IO_BASE;
-+ pci_ioport_resource.end = MCF5445X_PCI_IO_BASE + \
-+ MCF5445X_PCI_IO_SIZE - 1;
-+
-+ /*
-+ * Must Reset!!! If bootloader has PCI enabled, it will cause
-+ * problem in linux when it tries to configure/find resources
-+ * for the pci devices
-+ */
-+ MCF_PCI_PCIGSCR = 1;
-+
-+ /* arbitration controller */
-+ MCF_PCIARB_PACR = MCF_PCIARB_PACR_INTMPRI |
-+ MCF_PCIARB_PACR_EXTMPRI(0x0f) |
-+ MCF_PCIARB_PACR_INTMINTEN |
-+ MCF_PCIARB_PACR_EXTMINTEN(0x0f);
-+
-+ /* pci pin assignment regs */
-+#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE)
-+ MCF_GPIO_PAR_PCI = MCF_GPIO_PAR_PCI_GNT0 |
-+ MCF_GPIO_PAR_PCI_GNT1 |
-+ MCF_GPIO_PAR_PCI_GNT2 |
-+ MCF_GPIO_PAR_PCI_GNT3_GNT3 |
-+ MCF_GPIO_PAR_PCI_REQ0 |
-+ MCF_GPIO_PAR_PCI_REQ1 |
-+ MCF_GPIO_PAR_PCI_REQ2 |
-+ MCF_GPIO_PAR_PCI_REQ3_REQ3;
-+
-+ MCF_GPIO_PAR_PCI = (MCF_GPIO_PAR_PCI &
-+ (MCF_GPIO_PAR_PCI_GNT3_MASK &
-+ MCF_GPIO_PAR_PCI_REQ3_MASK)) |
-+ MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK |
-+ MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ;
-+#else
-+ MCF_GPIO_PAR_PCI = MCF_GPIO_PAR_PCI_GNT0 |
-+ MCF_GPIO_PAR_PCI_GNT1 |
-+ MCF_GPIO_PAR_PCI_GNT2 |
-+ MCF_GPIO_PAR_PCI_GNT3_GNT3 |
-+ MCF_GPIO_PAR_PCI_REQ0 |
-+ MCF_GPIO_PAR_PCI_REQ1 |
-+ MCF_GPIO_PAR_PCI_REQ2 |
-+ MCF_GPIO_PAR_PCI_REQ3_REQ3;
-+#endif
-+ /* target control reg */
-+ MCF_PCI_PCITCR = MCF_PCI_PCITCR_P |
-+ MCF_PCI_PCITCR_WCT(8);
-+
-+ /* PCI MEM address */
-+ MCF_PCI_PCIIW0BTAR = MCF5445X_PCI_MEM_BASE_PHY |
-+ (MCF5445X_PCI_MEM_BASE >> 16);
-+
-+ /* PCI MEM address */
-+ MCF_PCI_PCIIW1BTAR = (MCF5445X_PCI_MEM_BASE_PHY +
-+ MCF5445X_PCI_MEM_SIZE)
-+ | (MCF5445X_PCI_IO_BASE >> 16);
-+
-+ /* PCI IO address */
-+ MCF_PCI_PCIIW2BTAR = (MCF5445X_PCI_MEM_BASE_PHY +
-+ MCF5445X_PCI_MEM_SIZE + MCF5445X_PCI_IO_SIZE)
-+ | (MCF5445X_PCI_CONFIG_BASE >> 16);
-+
-+ /* window control */
-+ MCF_PCI_PCIIWCR = MCF_PCI_PCIIWCR_WINCTRL0_ENABLE |
-+ MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD |
-+ MCF_PCI_PCIIWCR_WINCTRL1_ENABLE |
-+ MCF_PCI_PCIIWCR_WINCTRL1_IO |
-+ MCF_PCI_PCIIWCR_WINCTRL2_ENABLE |
-+ MCF_PCI_PCIIWCR_WINCTRL2_IO;
-+
-+ /* initiator control reg */
-+ MCF_PCI_PCIICR = 0;
-+
-+ /* type 0 - command */
-+ MCF_PCI_PCISCR = MCF_PCI_PCISCR_MW | /* mem write/inval */
-+ MCF_PCI_PCISCR_B | /* bus master enable */
-+ MCF_PCI_PCISCR_MA | /* clear master abort error */
-+ MCF_PCI_PCISCR_M; /* mem access enable */
-+
-+ /* type 0 - config reg */
-+ MCF_PCI_PCICR1 = MCF_PCI_PCICR1_CACHELINESIZE(4) |
-+ MCF_PCI_PCICR1_LATTIMER(0xFF);
-+ /* type 0 - config 2 reg */
-+ MCF_PCI_PCICR2 = 0;
-+
-+ /* target control reg */
-+ MCF_PCI_PCITCR2 = MCF_PCI_PCITCR2_B0E | MCF_PCI_PCITCR2_B5E;
-+
-+ /* translate addresses from PCI[0] to CF[SDRAM] */
-+ MCF_PCI_PCITBATR0 = 0xFC000000 | MCF_PCI_PCITBATR5_EN;
-+ MCF_PCI_PCITBATR5 = MCF_RAMBAR1 | MCF_PCI_PCITBATR5_EN;
-+
-+ /* inbound window for memory */
-+ MCF_PCI_PCIBAR0 = 0xFC000000;
-+ MCF_PCI_PCIBAR5 = MCF_RAMBAR1;
-+
-+ /* setup controller interrupt handlers */
-+ if (request_irq(55+128, mcf5445x_pci_interrupt, IRQF_SHARED,
-+ "PCI Controller", NULL))
-+ printk(KERN_ERR "PCI: Unable to register controller irq\n");
-+
-+ if (request_irq(56+128, mcf5445x_pci_arb_interrupt, IRQF_SHARED,
-+ "PCI Arbiter", NULL))
-+ printk(KERN_ERR "PCI: Unable to register arbiter irq\n");
-+
-+ /* global control - clear reset bit */
-+ MCF_PCI_PCIGSCR = MCF_PCI_PCIGSCR_SEE |
-+ MCF_PCI_PCIGSCR_PEE;
-+
-+ /* let everything settle */
-+ udelay(1000);
-+
-+ /* allocate bus ioport resource */
-+ if (request_resource(&ioport_resource, &pci_ioport_resource) < 0)
-+ printk(KERN_ERR "PCI: Unable to alloc ioport resource\n");
-+
-+ /* allocate bus iomem resource */
-+ if (request_resource(&iomem_resource, &pci_iomem_resource) < 0)
-+ printk(KERN_ERR "PCI: Unable to alloc iomem resource\n");
-+
-+ /* setup FPGA to route PCI to IRQ3(67), SW7 to IRQ7, SW6 to IRQ4 */
-+ set_fpga(FPGA_PCI_IRQ_ENABLE, 0x00000000);
-+ set_fpga(FPGA_PCI_IRQ_ROUTE, 0x00000039);
-+ set_fpga(FPGA_SEVEN_LED, 0x000000FF);
-+
-+ raw_pci_ops = &mcf5445x_pci_ops;
-+#ifdef DEBUG
-+ mcf5445x_pci_dumpregs();
-+#endif
-+ return 0;
-+}
-+
-+/*
-+ * DEBUGGING
-+ */
-+
-+#ifdef DEBUG
-+struct regdump {
-+ u32 addr;
-+ char regname[16];
-+};
-+
-+struct regdump type0regs[] = {
-+ { 0xfc0a8000, "PCIIDR" },
-+ { 0xfc0a8004, "PCISCR" },
-+ { 0xfc0a8008, "PCICCRIR" },
-+ { 0xfc0a800c, "PCICR1" },
-+ { 0xfc0a8010, "PCIBAR0" },
-+ { 0xfc0a8014, "PCIBAR1" },
-+ { 0xfc0a8018, "PCIBAR2" },
-+ { 0xfc0a801c, "PCIBAR3" },
-+ { 0xfc0a8020, "PCIBAR4" },
-+ { 0xfc0a8024, "PCIBAR5" },
-+ { 0xfc0a8028, "PCICCPR" },
-+ { 0xfc0a802c, "PCISID" },
-+ { 0xfc0a8030, "PCIERBAR" },
-+ { 0xfc0a8034, "PCICPR" },
-+ { 0xfc0a803c, "PCICR2" },
-+ { 0, "" }
-+};
-+
-+struct regdump genregs[] = {
-+ { 0xfc0a8060, "PCIGSCR" },
-+ { 0xfc0a8064, "PCITBATR0" },
-+ { 0xfc0a8068, "PCITBATR1" },
-+ { 0xfc0a806c, "PCITCR1" },
-+ { 0xfc0a8070, "PCIIW0BTAR" },
-+ { 0xfc0a8074, "PCIIW1BTAR" },
-+ { 0xfc0a8078, "PCIIW2BTAR" },
-+ { 0xfc0a8080, "PCIIWCR" },
-+ { 0xfc0a8084, "PCIICR" },
-+ { 0xfc0a8088, "PCIISR" },
-+ { 0xfc0a808c, "PCITCR2" },
-+ { 0xfc0a8090, "PCITBATR0" },
-+ { 0xfc0a8094, "PCITBATR1" },
-+ { 0xfc0a8098, "PCITBATR2" },
-+ { 0xfc0a809c, "PCITBATR3" },
-+ { 0xfc0a80a0, "PCITBATR4" },
-+ { 0xfc0a80a4, "PCITBATR5" },
-+ { 0xfc0a80a8, "PCIINTR" },
-+ { 0xfc0a80f8, "PCICAR" },
-+ { 0, "" }
-+};
-+
-+struct regdump arbregs[] = {
-+ { 0xfc0ac000, "PACR" },
-+ { 0xfc0ac004, "PASR" }, /* documentation error */
-+ { 0, "" }
-+};
-+
-+/*
-+ * void mcf5445x_pci_dumpregs()
-+ *
-+ * Dump out all the PCI registers
-+ */
-+void
-+mcf5445x_pci_dumpregs(void)
-+{
-+ struct regdump *reg;
-+
-+ printk(KERN_INFO "*** MCF5445x PCI TARGET 0 REGISTERS ***\n");
-+
-+ reg = type0regs;
-+ while (reg->addr) {
-+ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr,
-+ *((u32 *)reg->addr), reg->regname);
-+ reg++;
-+ }
-+
-+ printk(KERN_INFO "\n*** MCF5445x PCI GENERAL REGISTERS ***\n");
-+ reg = genregs;
-+ while (reg->addr) {
-+ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr,
-+ *((u32 *)reg->addr), reg->regname);
-+ reg++;
-+ }
-+ printk(KERN_INFO "\n*** MCF5445x PCI ARBITER REGISTERS ***\n");
-+ reg = arbregs;
-+ while (reg->addr) {
-+ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr,
-+ *((u32 *)reg->addr), reg->regname);
-+ reg++;
-+ }
-+}
-+#endif /* DEBUG */
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/pci.c
-@@ -0,0 +1,247 @@
-+/*
-+ * linux/arch/m68k/coldfire/m5445x/pci.c
-+ *
-+ * PCI initialization for Coldfire architectures.
-+ *
-+ * Currently Supported:
-+ * M5445x
-+ *
-+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+
-+#include <asm/mcfsim.h>
-+#include <asm/pci.h>
-+
-+/* pci ops for reading/writing config */
-+struct pci_raw_ops *raw_pci_ops;
-+
-+/* pci debug flag */
-+static int debug_pci;
-+
-+static int
-+pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-+ int size, u32 *value)
-+{
-+ return raw_pci_ops->read(0, bus->number, devfn, where, size, value);
-+}
-+
-+static int
-+pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-+ int size, u32 value)
-+{
-+ return raw_pci_ops->write(0, bus->number, devfn, where, size, value);
-+}
-+
-+struct pci_ops pci_root_ops = {
-+ .read = pci_read,
-+ .write = pci_write,
-+};
-+
-+/*
-+ * pcibios_setup(char *)
-+ *
-+ * Initialize the pcibios based on cmd line params.
-+ */
-+char *
-+pcibios_setup(char *str)
-+{
-+ if (!strcmp(str, "debug")) {
-+ debug_pci = 1;
-+ return NULL;
-+ }
-+ return str;
-+}
-+
-+/*
-+ * We need to avoid collisions with `mirrored' VGA ports
-+ * and other strange ISA hardware, so we always want the
-+ * addresses to be allocated in the 0x000-0x0ff region
-+ * modulo 0x400.
-+ *
-+ * Why? Because some silly external IO cards only decode
-+ * the low 10 bits of the IO address. The 0x00-0xff region
-+ * is reserved for motherboard devices that decode all 16
-+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
-+ * but we want to try to avoid allocating at 0x2900-0x2bff
-+ * which might have be mirrored at 0x0100-0x03ff..
-+ */
-+resource_size_t
-+pcibios_align_resource(void *data, const struct resource *res,
-+ resource_size_t size, resource_size_t align)
-+{
-+ struct pci_dev *dev = data;
-+ resource_size_t start = res->start;
-+
-+ if (res->flags & IORESOURCE_IO) {
-+ if (size > 0x100)
-+ printk(KERN_ERR "PCI: I/O Region %s/%d too large"
-+ " (%ld bytes)\n", pci_name(dev),
-+ dev->resource - res, (long int)size);
-+
-+ if (start & 0x3ff)
-+ start = (start + 0x3ff) & ~0x3ff;
-+ }
-+
-+ return start;
-+}
-+EXPORT_SYMBOL(pcibios_align_resource);
-+
-+/*
-+ * Swizzle the device pin each time we cross a bridge
-+ * and return the slot number.
-+ */
-+static u8 __devinit
-+pcibios_swizzle(struct pci_dev *dev, u8 *pin)
-+{
-+ return 0;
-+}
-+
-+/*
-+ * Map a slot/pin to an IRQ.
-+ */
-+static int
-+pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return 0x43;
-+}
-+
-+/*
-+ * pcibios_update_irq(struct pci_dev *dev, int irq)
-+ *
-+ * Update a PCI interrupt.
-+ */
-+void
-+pcibios_update_irq(struct pci_dev *dev, int irq)
-+{
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-+}
-+
-+/*
-+ * pcibios_enable_device(struct pci_dev *dev, int mask)
-+ *
-+ * Enable a device on the PCI bus.
-+ */
-+int
-+pcibios_enable_device(struct pci_dev *dev, int mask)
-+{
-+ u16 cmd, old_cmd;
-+ int idx;
-+ struct resource *r;
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ old_cmd = cmd;
-+ for (idx = 0; idx < DEVICE_COUNT_RESOURCE; idx++) {
-+ r = &dev->resource[idx];
-+ if (!r->start && r->end) {
-+ printk(KERN_ERR "PCI: Device %s not available because "
-+ "of resource collisions\n", pci_name(dev));
-+ return -EINVAL;
-+ }
-+ if (r->flags & IORESOURCE_IO)
-+ cmd |= PCI_COMMAND_IO;
-+ if (r->flags & IORESOURCE_MEM)
-+ cmd |= PCI_COMMAND_MEMORY;
-+ }
-+ if (cmd != old_cmd) {
-+ printk("PCI: Enabling device %s (%04x -> %04x)\n",
-+ pci_name(dev), old_cmd, cmd);
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+#ifdef CONFIG_M54455
-+ mcf5445x_conf_device(dev);
-+#endif
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * pcibios_fixup_bus(struct pci_bus *bus)
-+ */
-+void
-+pcibios_fixup_bus(struct pci_bus *bus)
-+{
-+ struct pci_dev *dev = bus->self;
-+
-+ if (!dev) {
-+ /* Root bus. */
-+#ifdef CONFIG_M54455
-+ bus->resource[0] = &pci_ioport_resource;
-+ bus->resource[1] = &pci_iomem_resource;
-+#endif
-+ }
-+}
-+
-+/*
-+ * pcibios_init(void)
-+ *
-+ * Allocate/initialize low level pci bus/devices.
-+ */
-+#ifdef CONFIG_M54455_PCI_initcall
-+static int __init
-+#else
-+int __init
-+#endif
-+pcibios_init(void)
-+{
-+ struct pci_bus *bus;
-+
-+ if (!raw_pci_ops) {
-+ printk(KERN_WARNING "PCIBIOS: FATAL: NO PCI Hardware found\n");
-+ return 0;
-+ }
-+
-+ /* allocate and scan the (only) bus */
-+ bus = pci_scan_bus_parented(NULL, 0, &pci_root_ops, NULL);
-+
-+ /* setup everything */
-+ if (bus) {
-+ /* compute the bridge window sizes */
-+ pci_bus_size_bridges(bus);
-+
-+ /* (re)assign device resources */
-+ pci_bus_assign_resources(bus);
-+
-+ /* add the bus to the system */
-+ pci_bus_add_devices(bus);
-+
-+ /* fixup irqs */
-+ pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * pci_init(void)
-+ *
-+ * Initialize the PCI Hardware.
-+ */
-+#ifdef CONFIG_M54455_PCI_initcall
-+static int __init
-+#else
-+int __init
-+#endif
-+pci_init(void)
-+{
-+ printk(KERN_INFO "pci_init\n");
-+#if defined(CONFIG_M54455)
-+ init_mcf5445x_pci();
-+#endif
-+ if (!raw_pci_ops)
-+ printk(KERN_ERR "PCI: FATAL: NO PCI Detected\n");
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_M54455_PCI_initcall
-+/* low level hardware (first) */
-+arch_initcall(pci_init);
-+
-+/* basic bios init (second) */
-+subsys_initcall(pcibios_init);
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x/pci.c
-@@ -0,0 +1,1023 @@
-+/*
-+ * ColdFire 547x/548x PCI Host Controller functions
-+ *
-+ * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Shrek Wu b16972@freescale.com
-+ * This code is based on the 2.6.10 version of pci.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/pci.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/version.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+
-+#include <linux/dma-mapping.h>
-+#include <asm/coldfire.h>
-+#include <linux/io.h>
-+#include <asm/m5485sim.h>
-+#include <asm/m5485pci.h>
-+#include <asm/irq.h>
-+#include <linux/pci.h>
-+#include <asm/virtconvert.h>
-+
-+
-+#undef DEBUG
-+/*define DEBUG*/
-+#ifdef DEBUG
-+/*#define DBG(x...) printk(KERN_DEBUG x)*/
-+#define DBG(x...) printk(x)
-+#else
-+#define DBG(x...)
-+#endif
-+
-+/*
-+ * Bridge configration dafaults
-+ */
-+#define PCI_RETRIES 0
-+#define PCI_CACHE_LINE 8
-+#define PCI_MINGNT 1
-+#define PCI_MAXLAT 42
-+
-+
-+/*
-+ * Initiator windows setting
-+ */
-+#define HOST_MEM_BASE 0xD0000000
-+/* ColdFire Memory window base */
-+#define PCI_MEM_BASE 0xD0000000
-+/* PCI Memory window base */
-+#define PCI_MEM_SIZE 0x08000000
-+/* Memory window size (128M) */
-+#define HOST_IO_BASE 0xD8000000
-+/* ColdFire I/O window base */
-+#define PCI_IO_BASE_ADDR 0x00000000
-+/* PCI I/O window base */
-+#define PCI_IO_SIZE 0x00010000
-+/* I/O window size (64K) */
-+/*#define HOST_CFG_BASE 0xD8000000*/
-+#define HOST_CFG_BASE 0xD8008000
-+/* ColdFire config window base */
-+#define HOST_DMA_BASE CONFIG_SDRAM_BASE
-+/* ColdFire PCI-DMA window base */
-+#define PCI_HDR_BASE (MCF_MBAR+0xB00)
-+/* ColdFire config registers */
-+
-+#define PCI_MEM_MASK (PCI_MEM_SIZE-1)
-+#define PCI_IO_MASK (PCI_IO_SIZE-1)
-+
-+/* Macro to set initiator window */
-+#define WxBAR(host_address, pci_address, size) \
-+ (((host_address) & 0xff000000) | \
-+ ((((size)-1) & 0xff000000) >> 8) | \
-+ ((pci_address) & 0xff000000) >> 16)
-+
-+/*
-+ * BIOS internal data
-+ */
-+static u8 revision; /* controller revision */
-+
-+/*
-+ * Board specific setting
-+ */
-+const unsigned int irq_lines[] = { 5, 7 };
-+
-+#define N_SLOTS (sizeof(board_info) / sizeof(board_info[0]))
-+#define N_IRQS (sizeof(irq_lines) / sizeof(irq_lines[0]))
-+#define BRIDGE_SLOT 0
-+
-+const struct slotinfo {
-+ unsigned char idsel; /* device number */
-+ unsigned char irq; /* external IRQ */
-+ unsigned char req; /* REQ line number */
-+ unsigned char gnt; /* GNT line number */
-+} board_info[] = {
-+ {0, 0, 0, 0}, /* Bridge */
-+ {17, 5, 1, 1}, /* Slot #1 */
-+ {18, 5, 2, 2}, /* Slot #2 */
-+ {20, 7, 3, 3}, /* Slot #3 */
-+ {21, 7, 4, 4}, /* Slot #4 */
-+};
-+
-+/************************************************************************/
-+
-+/*
-+ * static int mk_conf_addr()
-+ *
-+ * Return type0 or type1 configuration address
-+ * by the means of device address and PCI dword location
-+ * 0 - for not existing slots
-+ */
-+static int mk_conf_addr(/*struct pci_dev *dev*/
-+ struct pci_bus *bus, unsigned int devfn, int where)
-+{
-+ int slot, func, address, idsel, dev_fn;
-+
-+ if (bus->number) {
-+ address = MCF_PCICAR_E | (bus->number << 16) |
-+ (devfn << 8) | (where & 0xfc);
-+ } else {
-+ slot = PCI_SLOT(devfn);
-+ if (slot > N_SLOTS || slot == BRIDGE_SLOT)
-+ return 0;
-+ else {
-+ func = PCI_FUNC(devfn);
-+ idsel = board_info[slot].idsel;
-+
-+ dev_fn = PCI_DEVFN(idsel, func);
-+ address = MCF_PCICAR_E | (bus->number << 16) |
-+ (dev_fn << 8) | (where & 0xfc);
-+ }
-+ }
-+
-+ return address;
-+}
-+
-+/*
-+ * static int read_config_byte()
-+ *
-+ * Read a byte from configuration space of specified device
-+ */
-+static int read_config_byte(/*struct pci_dev *dev*/
-+ struct pci_bus *bus, unsigned int devfn, int where, u8 *value)
-+{
-+ int slot;
-+ int address;
-+ int result;
-+
-+ *value = 0xff;
-+ result = PCIBIOS_SUCCESSFUL;
-+
-+ slot = PCI_SLOT(devfn);
-+ if (slot == BRIDGE_SLOT) {
-+ if (where <= 0x40)
-+ *value = *(volatile u8 *) (PCI_HDR_BASE +
-+ (where & 0xfc) + (where & 3));
-+ else
-+ *value = 0;
-+ } else {
-+ address = mk_conf_addr(bus, devfn, where);
-+ if (!address)
-+ result = PCIBIOS_DEVICE_NOT_FOUND;
-+ else {
-+ MCF_PCICAR = address;
-+ __asm__ __volatile__("nop");
-+ *value = *(volatile u8 *) (HOST_CFG_BASE + (where & 3));
-+ }
-+ }
-+ __asm("tpf");
-+ MCF_PCICAR &= ~MCF_PCICAR_E;
-+ DBG("PCI: read_config_byte bus=%d, dev=%d, fn=%d,"
-+ " addr=0x%02X, val=0x%02X, ret=%02X\n",
-+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, *value, result);
-+
-+ return result;
-+}
-+
-+/*
-+ * static int read_config_word()
-+ *
-+ * Read a word from configuration space of specified device
-+ */
-+static int read_config_word(/*struct pci_dev *dev*/
-+ struct pci_bus *bus, unsigned int devfn, int where, u16 *value)
-+{
-+ int slot;
-+ int address;
-+ int result;
-+
-+ *value = 0xffff;
-+ result = PCIBIOS_SUCCESSFUL;
-+
-+ if (where & 0x1)
-+ result = PCIBIOS_BAD_REGISTER_NUMBER;
-+ else {
-+ slot = PCI_SLOT(devfn);
-+ if (slot == BRIDGE_SLOT) {
-+ if (where <= 0x3f)
-+ *value =
-+ *(volatile u16 *) (PCI_HDR_BASE +
-+ (where & 0xfc) + (where & 2));
-+ else
-+ *value = 0;
-+ } else {
-+ address = mk_conf_addr(bus, devfn, where);
-+ if (!address)
-+ result = PCIBIOS_DEVICE_NOT_FOUND;
-+ else {
-+ MCF_PCICAR = address;
-+ __asm__ __volatile__("nop");
-+ *value = le16_to_cpu(*(volatile u16 *)
-+ (HOST_CFG_BASE +
-+ (where & 2)));
-+ }
-+ }
-+ }
-+ __asm("tpf");
-+ MCF_PCICAR &= ~MCF_PCICAR_E;
-+ DBG("PCI: read_config_word bus=%d, dev=%d, fn=%d,"
-+ " addr=0x%02X, val=0x%04X ret=%02X\n",
-+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, *value, result);
-+
-+ return result;
-+}
-+
-+/*
-+ * static int read_config_dword()
-+ *
-+ * Read a long word from configuration space of specified device
-+ */
-+static int read_config_dword(/*struct pci_dev *dev*/
-+ struct pci_bus *bus, unsigned int devfn, int where, u32 *value)
-+{
-+ int slot;
-+ int address;
-+ int result;
-+
-+ *value = 0xffffffff;
-+ result = PCIBIOS_SUCCESSFUL;
-+
-+ if (where & 0x3)
-+ result = PCIBIOS_BAD_REGISTER_NUMBER;
-+ else {
-+ slot = PCI_SLOT(devfn);
-+ if (slot == BRIDGE_SLOT) {
-+ if (where <= 0x3d)
-+ *value =
-+ *(volatile u32 *) (PCI_HDR_BASE + where);
-+ else
-+ *value = 0;
-+ __asm("tpf");
-+ } else {
-+ address = mk_conf_addr(bus, devfn, where);
-+ if (!address)
-+ result = PCIBIOS_DEVICE_NOT_FOUND;
-+ else {
-+ MCF_PCICAR = address;
-+ __asm__ __volatile__("nop");
-+ *value = le32_to_cpu(*(volatile u32 *)
-+ (HOST_CFG_BASE));
-+ __asm("tpf");
-+ if (bus->number != 0 && revision < 1) {
-+ volatile u32 temp;
-+ MCF_PCICAR |= 0xff0000;
-+ temp = *(volatile u32 *)
-+ (HOST_CFG_BASE);
-+ }
-+ }
-+ }
-+ }
-+
-+ MCF_PCICAR &= ~MCF_PCICAR_E;
-+ DBG("PCI: read_config_dword bus=%d, dev=%d, fn=%d, "
-+ "addr=0x%02X, value=0x%08X ret=%02X\n",
-+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, *value, result);
-+
-+ return result;
-+}
-+
-+
-+
-+/*
-+ * static int write_config_byte()
-+ *
-+ * Write a byte to configuration space of specified device
-+ */
-+static int write_config_byte(/*struct pci_dev *dev*/
-+ struct pci_bus *bus, unsigned int devfn, int where, u8 value)
-+{
-+ int slot;
-+ int address;
-+ int result;
-+
-+ result = PCIBIOS_SUCCESSFUL;
-+
-+ slot = PCI_SLOT(devfn);
-+ if (slot == BRIDGE_SLOT) {
-+ if (where <= 0x40)
-+ *(volatile u8 *) (PCI_HDR_BASE + (where & 0xfc)
-+ + (where & 3)) = value;
-+ } else {
-+ address = mk_conf_addr(bus, devfn, where);
-+ if (!address)
-+ result = PCIBIOS_DEVICE_NOT_FOUND;
-+ else {
-+ MCF_PCICAR = address;
-+ __asm__ __volatile__("tpf");
-+ *(volatile u8 *) (HOST_CFG_BASE + (where & 3)) = value;
-+ }
-+ }
-+ __asm("tpf");
-+ MCF_PCICAR &= ~MCF_PCICAR_E;
-+ pci_dummy_function();
-+
-+ DBG("PCI: write_config_byte bus=%d, dev=%d, fn=%d, "
-+ "addr=0x%02X, value=0x%02X ret=%02X\n",
-+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, value, result);
-+
-+ return result;
-+}
-+
-+/*
-+ * static int write_config_word()
-+ *
-+ * Write a word to configuration space of specified device
-+ */
-+static int write_config_word(/*struct pci_dev *dev*/
-+ struct pci_bus *bus, unsigned int devfn, int where, u16 value)
-+{
-+ int slot;
-+ int address;
-+ int result;
-+
-+ result = PCIBIOS_SUCCESSFUL;
-+
-+ if (where & 0x1)
-+ result = PCIBIOS_BAD_REGISTER_NUMBER;
-+ else {
-+ slot = PCI_SLOT(devfn);
-+ if (slot == BRIDGE_SLOT) {
-+ if (where <= 0x3f)
-+ *(volatile u16 *) (PCI_HDR_BASE +
-+ (where & 0xfc) + (where & 2)) = value;
-+ } else {
-+ address = mk_conf_addr(bus, devfn, where);
-+ if (!address)
-+ result = PCIBIOS_DEVICE_NOT_FOUND;
-+ else {
-+ MCF_PCICAR = address;
-+ __asm__ __volatile__("tpf");
-+ *(volatile u16 *) (HOST_CFG_BASE
-+ + (where & 2)) =
-+ cpu_to_le16(value);
-+ }
-+ }
-+ }
-+ __asm("tpf");
-+ MCF_PCICAR &= ~MCF_PCICAR_E;
-+ pci_dummy_function();
-+
-+ DBG("PCI: write_config_word bus=%d, dev=%d, fn=%d, "
-+ "addr=0x%02X, value=0x%04X ret=%02X\n",
-+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, value, result);
-+
-+ return result;
-+}
-+
-+/*
-+ * static int write_config_dword()
-+ *
-+ * Write a long word to configuration space of specified device
-+ */
-+static int write_config_dword(/*struct pci_dev *dev*/
-+ struct pci_bus *bus, unsigned int devfn, int where, u32 value)
-+{
-+ int slot;
-+ int address;
-+ int result;
-+
-+ result = PCIBIOS_SUCCESSFUL;
-+
-+ if (where & 0x3)
-+ result = PCIBIOS_BAD_REGISTER_NUMBER;
-+ else {
-+ slot = PCI_SLOT(devfn);
-+ if (slot == BRIDGE_SLOT) {
-+ if (where <= 0x3d)
-+ *(volatile u32 *) (PCI_HDR_BASE + where) =
-+ value;
-+ } else {
-+ address = mk_conf_addr(bus, devfn, where);
-+ if (!address)
-+ result = PCIBIOS_DEVICE_NOT_FOUND;
-+ else {
-+ MCF_PCICAR = address;
-+ __asm__ __volatile__("tpf");
-+ *(volatile u32 *) (HOST_CFG_BASE) =
-+ cpu_to_le32(value);
-+ }
-+ }
-+ }
-+ __asm("tpf");
-+ MCF_PCICAR &= ~MCF_PCICAR_E;
-+ pci_dummy_function();
-+
-+ DBG("PCI: write_config_dword dev=%d, fn=%d,"
-+ "addr=0x%02X, value=0x%08X ret=%02X\n",
-+ PCI_SLOT(devfn), PCI_FUNC(devfn), where, value, result);
-+
-+ return result;
-+}
-+
-+static int config_read(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *val)
-+{
-+ switch (size) {
-+ case 1:
-+ return read_config_byte(bus, devfn, where, (u8 *) val);
-+ case 2:
-+ return read_config_word(bus, devfn, where, (u16 *) val);
-+ default:
-+ return read_config_dword(bus, devfn, where, val);
-+ }
-+}
-+
-+static int config_write(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 val)
-+{
-+ switch (size) {
-+ case 1:
-+ return write_config_byte(bus, devfn, where, (u8) val);
-+ case 2:
-+ return write_config_word(bus, devfn, where, (u16) val);
-+ default:
-+ return write_config_dword(bus, devfn, where, val);
-+ }
-+}
-+
-+/*
-+ * configuration routines entry points
-+ */
-+static struct pci_ops bus_ops = {
-+ .read = config_read,
-+ .write = config_write,
-+};
-+
-+/************************************************************************/
-+
-+/*
-+ * u8 pci_inb()
-+ *
-+ * Read a byte at specified address from I/O space
-+ */
-+unsigned char pci_inb(long addr)
-+{
-+ char value;
-+
-+ value = *(volatile unsigned char *)(HOST_IO_BASE |
-+ (addr & PCI_IO_MASK));
-+ DBG("PCI: inb addr=0x%08X, value=0x%02X\n", addr, value);
-+
-+ return (unsigned char) value;
-+}
-+
-+
-+/*
-+ * u16 pci_inw()
-+ *
-+ * Read a word at specified address from I/O space
-+ */
-+unsigned short pci_inw(long addr)
-+{
-+ short value;
-+ volatile unsigned short *ptr;
-+
-+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ value = le16_to_cpu(*ptr);
-+
-+ DBG("PCI: inw addr=0x%08X, value=0x%04X\n", addr, value);
-+ return (unsigned short) value;
-+}
-+
-+/*
-+ * u16 pci_raw_inw()
-+ *
-+ * Read a raw word at specified address from I/O space
-+ */
-+unsigned short pci_raw_inw(long addr)
-+{
-+ short value;
-+ volatile unsigned short *ptr;
-+
-+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ value = *ptr;
-+
-+ DBG("PCI: raw_inw addr=0x%08X, value=0x%04X\n", addr, value);
-+ return (unsigned short) value;
-+}
-+
-+/*
-+ * u32 pci_inl()
-+ *
-+ * Read a dword at specified address from I/O space
-+ */
-+unsigned long pci_inl(long addr)
-+{
-+ long value;
-+ volatile unsigned long *ptr;
-+
-+ ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ value = le32_to_cpu(*ptr);
-+
-+ DBG("PCI: inl addr=0x%08X, value=0x%08X\n", addr, value);
-+ return (unsigned long) value;
-+}
-+
-+/*
-+ * u32 pci_raw_inl()
-+ *
-+ * Read a raw dword at specified address from I/O space
-+ */
-+unsigned long pci_raw_inl(long addr)
-+{
-+ long value;
-+ volatile unsigned long *ptr;
-+
-+ ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ value = *ptr;
-+
-+ DBG("PCI: raw_inl addr=0x%08X, value=0x%08X\n", addr, value);
-+ return (unsigned long) value;
-+}
-+
-+/*
-+ * void pci_outb()
-+ *
-+ * Write a byte value at specified address to I/O space
-+ */
-+void pci_outb(unsigned char value, long addr)
-+{
-+
-+ *(volatile unsigned char *)(HOST_IO_BASE | (addr & PCI_IO_MASK))
-+ = value;
-+ DBG("PCI: outb addr=0x%08X, value=0x%02X\n", addr, value);
-+}
-+
-+
-+/*
-+ * void pci_outw()
-+ *
-+ * Write a word value at specified address to I/O space
-+ */
-+void pci_outw(volatile unsigned short value, volatile long addr)
-+{
-+ volatile unsigned short *ptr;
-+
-+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ *ptr = cpu_to_le16(value);
-+ DBG("PCI: outw addr=0x%08X, value=0x%04X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_raw_outw()
-+ *
-+ * Write a raw word value at specified address to I/O space
-+ */
-+void pci_raw_outw(volatile unsigned short value, volatile long addr)
-+{
-+ volatile unsigned short *ptr;
-+
-+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ *ptr = value;
-+ DBG("PCI: raw_outw addr=0x%08X, value=0x%04X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_outl()
-+ *
-+ * Write a long word value at specified address to I/O space
-+ */
-+void pci_outl(volatile unsigned long value, volatile long addr)
-+{
-+ volatile unsigned long *ptr;
-+
-+ ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ *ptr = cpu_to_le32(value);
-+ DBG("PCI: outl addr=0x%08X, value=0x%08X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_raw_outl()
-+ *
-+ * Write a raw long word value at specified address to I/O space
-+ */
-+void pci_raw_outl(volatile unsigned long value, volatile long addr)
-+{
-+ volatile unsigned long *ptr;
-+
-+ ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK));
-+ *ptr = value;
-+ DBG("PCI: raw_outl addr=0x%08X, value=0x%08X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_insb()
-+ *
-+ * Read several byte values from specified I/O port
-+ */
-+void pci_insb(volatile unsigned char *addr, unsigned char *buf, int len)
-+{
-+ for (; len--; buf++)
-+ *buf = pci_inb((unsigned long)addr);
-+ DBG("PCI: pci_insb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+
-+/*
-+ * void pci_insw()
-+ *
-+ * Read several word values from specified I/O port
-+ */
-+void pci_insw(volatile unsigned short *addr, unsigned short *buf, int len)
-+{
-+ for (; len--; buf++)
-+ *buf = pci_inw((unsigned long)addr);
-+ DBG("PCI: pci_insw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_insl()
-+ *
-+ * Read several dword values from specified I/O port
-+ */
-+void pci_insl(volatile unsigned long *addr, unsigned long *buf, int len)
-+{
-+ for (; len--; buf++)
-+ *buf = pci_inl((unsigned long)addr);
-+ DBG("PCI: pci_insl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsb()
-+ *
-+ * Write several byte values to specified I/O port
-+ */
-+void pci_outsb(volatile unsigned char *addr, const unsigned char *buf, int len)
-+{
-+ for (; len--; buf++)
-+ pci_outb((unsigned long)addr, *buf);
-+ DBG("PCI: pci_outsb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsw()
-+ *
-+ * Write several word values to specified I/O port
-+ */
-+void pci_outsw(volatile unsigned short *addr,
-+ const unsigned short *buf, int len)
-+{
-+ for (; len--; buf++)
-+ pci_outw((unsigned long)addr, *buf);
-+ DBG("PCI: pci_outsw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsl()
-+ *
-+ * Write several dword values to specified I/O port
-+ */
-+void pci_outsl(volatile unsigned long *addr, const unsigned long *buf, int len)
-+{
-+ for (; len--; buf++)
-+ pci_outl((unsigned long)addr, *buf);
-+ DBG("PCI: pci_outsl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_xlb_handler()
-+ *
-+ * PCI XLB interrupt handler
-+ */
-+irqreturn_t xlb_interrupt(int irq, void *dev)
-+{
-+ volatile int xlb_error = MCF_PCIISR;
-+
-+ /* Acknowlege interrupt */
-+ MCF_PCIISR = xlb_error;
-+
-+ /* Dump interrupt reason */
-+ if (xlb_error & MCF_PCIISR_RE)
-+ DBG("PCI: Retry Error Received\n");
-+
-+ if (xlb_error & MCF_PCIISR_IA)
-+ DBG("PCI: Initiator Abort Received\n");
-+
-+ if (xlb_error & MCF_PCIISR_TA)
-+ DBG("PCI: Target Abort Received\n");
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * void pci_arbiter_handler()
-+ *
-+ * PCI arbiter interrupt handler
-+ */
-+irqreturn_t arb_interrupt(int irq, void *dev)
-+{
-+ volatile unsigned long arb_error = MCF_PCIARB_PASR;
-+
-+ /* Acknowlege interrupt */
-+ printk(KERN_ERR "%s\n", __func__);
-+ MCF_PCIARB_PASR = arb_error;
-+
-+ if (arb_error & MCF_PCIARB_PASR_ITLMBK) {
-+ DBG("PCI: coldfire master time-out\n");
-+
-+ /* Set infinite number of retries */
-+ MCF_PCIICR &= ~0xFF;
-+ }
-+
-+ if (arb_error & MCF_PCIARB_PASR_EXTMBK(0x1F)) {
-+ arb_error >>= 17;
-+ DBG("PCI: external master time-out (mask = 0x%X)\n", arb_error);
-+
-+ /* raise arbitration priority level */
-+ MCF_PCIARB_PACR = MCF_PCIARB_PACR_EXTMPRI(arb_error);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * void pci_eint_handler()
-+ *
-+ * Eport interrupt handler
-+ */
-+irqreturn_t eint_handler(int irq, void *dev)
-+{
-+ /* Just acknowlege interrupt and exit */
-+ MCF_EPFR = 0x1 << (irq - 64);
-+ return IRQ_HANDLED;
-+}
-+
-+resource_size_t
-+pcibios_align_resource(void *data, const struct resource *res,
-+ resource_size_t size, resource_size_t align)
-+{
-+ struct pci_dev *dev = data;
-+ resource_size_t start = res->start;
-+
-+ if (res->flags & IORESOURCE_IO) {
-+ if (size > 0x100)
-+ printk(KERN_ERR "PCI: I/O Region %s/%d too large"
-+ " (%ld bytes)\n", pci_name(dev),
-+ dev->resource - res, (long int)size);
-+
-+ if (start & 0x3ff)
-+ start = (start + 0x3ff) & ~0x3ff;
-+ }
-+
-+ return start;
-+}
-+EXPORT_SYMBOL(pcibios_align_resource);
-+
-+/*
-+ * void __init coldfire_fixup(int pci_modify)
-+ *
-+ * Assign IRQ numbers as used by Linux to the interrupt pins
-+ * of the PCI cards.
-+ */
-+static void __init coldfire_fixup(int pci_modify)
-+{
-+ struct pci_dev *dev;
-+ unsigned char slot, pin;
-+
-+ DBG("%s\n", __func__);
-+#ifdef NL_ORIGINAL
-+ pci_for_each_dev(dev) {
-+#else
-+ dev = NULL;
-+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-+#endif
-+ if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) {
-+ slot = PCI_SLOT(dev->devfn);
-+ dev->irq = 64 + board_info[slot].irq;
-+
-+ /* Check if device needs interrupt */
-+#ifdef NL_ORIGINAL
-+ pcibios_read_config_byte(
-+ dev->bus->number, dev->devfn,
-+ PCI_INTERRUPT_PIN, &pin);
-+
-+ if (pin) {
-+ pcibios_write_config_byte(
-+ dev->bus->number, dev->devfn,
-+ PCI_INTERRUPT_LINE, dev->irq);
-+ }
-+#else
-+ pci_read_config_byte(dev,
-+ PCI_INTERRUPT_PIN, &pin);
-+
-+ if (pin) {
-+ pci_write_config_byte(dev,
-+ PCI_INTERRUPT_LINE, dev->irq);
-+ }
-+#endif
-+ }
-+ }
-+}
-+
-+static void __init configure_device(struct pci_dev *dev)
-+{
-+ /* TODO: This should depend from disable_pci_burst setting */
-+ DBG("%s\n", __func__);
-+#ifdef NL_ORIGINAL
-+ pcibios_write_config_byte(bus, devfn,
-+ PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE);
-+#else
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE);
-+
-+ MCF_PCICR1 = MCF_PCICR1_LATTIMER(0xF8) |
-+ MCF_PCICR1_CACHELINESIZE(PCI_CACHE_LINE);
-+
-+#endif
-+}
-+
-+
-+struct pci_bus_info *__init init_coldfire_pci(void)
-+{
-+ struct pci_bus_info *bus;
-+ int i;
-+ unsigned long pci_mem_va;
-+ static char irq_name[N_IRQS][15];
-+
-+ MCF_SPCR |= 0x02; /*Enable the PCI clock*/
-+
-+ /* Get controller revision */
-+ revision = MCF_PCICCRIR;
-+ printk(KERN_INFO "ColdFire PCI Host Bridge "
-+ "(Rev. %d) detected:"
-+ "MEMBase %x,MEMLen %x,IOBase %x,IOLen %x\n",
-+ revision, HOST_MEM_BASE,
-+ PCI_MEM_SIZE - 1, 0, PCI_IO_SIZE - 1);
-+
-+ bus = (struct pci_bus_info *)kmalloc(sizeof(struct pci_bus_info),
-+ GFP_KERNEL);
-+ if (!bus) {
-+ printk(KERN_ERR "can not alloc mem for pci bus!\n");
-+ return NULL;
-+ }
-+
-+ /* Setup bus info structure. */
-+ memset(bus, 0, sizeof(struct pci_bus_info));
-+
-+ /* Request intiator memory resource */
-+ bus->mem_space.start = PCI_MEM_BASE;/*HOST_MEM_BASE;*/
-+ bus->mem_space.end = bus->mem_space.start + PCI_MEM_SIZE - 1;
-+ bus->mem_space.name = "PCI Bus #0";
-+ if (request_resource(&iomem_resource,
-+ &(bus->mem_space)) != 0) {
-+ printk(KERN_ERR "Failed to request bridge iomem resource\n");
-+ return NULL;
-+ }
-+
-+ /* Request intiator memory resource */
-+ /*bus->io_space.start = 0;*/
-+ bus->io_space.start = HOST_IO_BASE;
-+ bus->io_space.end = bus->io_space.start + PCI_IO_SIZE - 1;
-+ bus->io_space.name = "PCI Bus #0";
-+ if (request_resource(&ioport_resource,
-+ &(bus->io_space)) != 0) {
-+ printk(KERN_ERR "Failed to request bridge "
-+ "ioport resource\n");
-+ return NULL;
-+ }
-+
-+ /* Must Reset!!! If bootloader has PCI enabled, it will cause
-+ * problem in linux when it tries to configure/find resources
-+ * for the pci devices. Both registers need to be reset.
-+ */
-+ /*MCF_PCIGSCR |= 0x1;*/
-+ MCF_PCIGSCR = 0x1;
-+ MCF_PCITCR = 0x00000000;
-+
-+ /* Set up the arbiter */
-+ MCF_PCIARB_PACR = 0; /*MCF_PCIARB_PACR_PKMD*/
-+
-+ /* GNT and REQ */
-+ MCF_PAR_PCIBG = 0x3FF;
-+ MCF_PAR_PCIBR = 0x3FF;
-+
-+ /* Enable bus mastering, memory access and MWI */
-+ MCF_PCISCR = (MCF_PCISCR_B | MCF_PCISCR_M);
-+
-+ /* Setup burst parameters */
-+ /*The offset 0x0e normally was header_type, set it to 0 and fix later*/
-+ MCF_PCICR1 = MCF_PCICR1_LATTIMER(0x00) |
-+ MCF_PCICR1_CACHELINESIZE(PCI_CACHE_LINE);
-+
-+ MCF_PCICR2 = 0;
-+ /*MCF_PCICR2_MINGNT(PCI_MINGNT) |
-+ MCF_PCICR2_MAXLAT(PCI_MAXLAT);
-+ */
-+ /* Turn on error signaling */
-+ MCF_PCIICR = MCF_PCIICR_TAE | MCF_PCIICR_IAE | PCI_RETRIES;
-+ MCF_PCIGSCR |= MCF_PCIGSCR_SEE;
-+ /*
-+ * Configure Initiator Windows
-+ * Window 0: 128M PCI Memory @ HOST_MEM_BASE, 1:1 mapping
-+ * Window 1: 64K I/O Memory @ HOST_IO_BASE, 1:0 mapping
-+ */
-+ MCF_PCIIW0BTAR = WxBAR(HOST_MEM_BASE, PCI_MEM_BASE, PCI_MEM_SIZE);
-+ MCF_PCIIW1BTAR = WxBAR(HOST_IO_BASE, PCI_IO_BASE_ADDR, PCI_IO_SIZE);
-+
-+ MCF_PCIIWCR = MCF_PCIIWCR_WINCTRL1_IO |
-+ MCF_PCIIWCR_WINCTRL0_MEMREAD;
-+
-+ /* Target PCI DMA Windows */
-+ MCF_PCIBAR1 = PCI_DMA_BASE;
-+ MCF_PCITBATR1 = HOST_DMA_BASE | MCF_PCITBATR1_EN;
-+
-+ /* Enable internal PCI controller interrupts */
-+ MCF_ICR(ISC_PCI_XLB) = ILP_PCI_XLB;
-+ /*request_irq(64+ISC_PCI_XLB, xlb_interrupt,
-+ SA_INTERRUPT, "PCI XL Bus", (void*)-1);
-+ enable_irq (64+ISC_PCI_XLB);
-+ */
-+ if (request_irq(64+ISC_PCI_XLB, xlb_interrupt,
-+ IRQF_DISABLED, "PCI XL Bus", (void *)-1)) {
-+ printk(KERN_ERR "Cannot allocate "
-+ "ISC_PCI_XLB IRQ\n");
-+ return (struct pci_bus_info *)-EBUSY;
-+ }
-+
-+ MCF_ICR(ISC_PCI_ARB) = ILP_PCI_ARB;
-+ /*request_irq(64+ISC_PCI_ARB, arb_interrupt,
-+ SA_INTERRUPT, "PCI Arbiter", (void*)-1);
-+ enable_irq (64+ISC_PCI_ARB);
-+ */
-+ if (request_irq(64 + ISC_PCI_ARB, arb_interrupt,
-+ IRQF_DISABLED, "PCI Arbiter", (void *)-1)) {
-+ printk(KERN_ERR "Cannot allocate "
-+ "ISC_PCI_ARB IRQ\n");
-+ return (struct pci_bus_info *)-EBUSY;
-+ }
-+
-+ /* Set slots interrupt setting */
-+ for (i = 0; i < N_IRQS; i++) {
-+ /* Set trailing edge for PCI interrupts */
-+ MCF_EPPAR &= ~MCF_EPPAR_EPPA(irq_lines[i], 0x3);
-+ if (irq_lines[i] == 5)
-+ MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i],
-+ MCF_EPPAR_EPPAx_FALLING);
-+ else
-+ MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i],
-+ 0/*MCF_EPPAR_EPPAx_FALLING*/);
-+ /* Turn on irq line in eport */
-+ MCF_EPIER |= MCF_EPIER_EPIE(irq_lines[i]);
-+
-+ /* Enable irq in gpio */
-+ if (irq_lines[i] == 5)
-+ MCF_PAR_FECI2CIRQ |= 1;
-+
-+ if (irq_lines[i] == 6)
-+ MCF_PAR_FECI2CIRQ |= 2;
-+
-+ /* Register external interrupt handlers */
-+ sprintf(irq_name[i], "PCI IRQ%d", irq_lines[i]);
-+ /*request_irq(64 + irq_lines[i], eint_handler,
-+ SA_SHIRQ, irq_name[i], (void*)-1);
-+ enable_irq(64 + irq_lines[i]);*/
-+ if (request_irq(64 + irq_lines[i], eint_handler,
-+ IRQF_SHARED, irq_name[i], (void *)-1)) {
-+ printk(KERN_ERR "Cannot allocate "
-+ "irq_lines[%d] IRQ\n",
-+ irq_lines[i]);
-+ return (struct pci_bus_info *)-EBUSY;
-+ }
-+ }
-+
-+ /* Clear PCI Reset and wait for devices to reset */
-+ MCF_PCIGSCR &= ~MCF_PCIGSCR_PR;
-+ schedule_timeout((5 * HZ));
-+ /* Remap initiator windows (should be 1:1 to the physical memory) */
-+ pci_mem_va = (int) ioremap_nocache(HOST_MEM_BASE,
-+ PCI_MEM_SIZE + PCI_IO_SIZE);
-+ udelay(1000); /* let every thing effect */
-+#if 1
-+ printk(KERN_INFO "%s: MEMBase_phy %x, Virt %x, len %x\n",
-+ __func__, HOST_MEM_BASE, pci_mem_va,
-+ PCI_MEM_SIZE + PCI_IO_SIZE);
-+#endif
-+ BUG_ON(pci_mem_va != HOST_MEM_BASE);
-+
-+ /* Setup bios32 and pci bus driver callbacks */
-+ bus->m68k_pci_ops = &bus_ops;
-+ bus->fixup = coldfire_fixup;
-+ bus->conf_device = configure_device;
-+
-+ return bus;
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x/pci_dummy.S
-@@ -0,0 +1,45 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Author: Jason Jin <Jason.jin@freescale.com>
-+ *
-+ * This routine is the dummy function for PCI errata
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+.global _pci_dummy_function
-+.global pci_dummy_function
-+.text
-+
-+pci_dummy_function:
-+_pci_dummy_function:
-+
-+/* force function start to 16-byte boundary.Can be done in linker file also */
-+.align 16
-+clr.l %d0
-+move.l %d0, 0xF0000F0C
-+/* Must use direct addressing. write to EPORT module
-+* xlbus -> slavebus -> eport, writing '0' to register has no
-+* effect
-+*/
-+
-+rts
-+tpf.l #0x0
-+tpf.l #0x0
-+tpf.l #0x0
-+tpf.l #0x0
-+tpf.l #0x0
-+.end
---- /dev/null
-+++ b/arch/m68k/include/asm/5445x_pci.h
-@@ -0,0 +1,111 @@
-+/*
-+ * asm-m68k/pci.h - m68k specific PCI declarations.
-+ *
-+ * Copyright (C) 2007, 2009-2011 Freescale Semiconductor, Inc.
-+ * All Rights Reserved.
-+ * Kurt Mahan <kmahan@freescale.com>
-+ */
-+#ifndef _ASM_M68K_5445X_PCI_H
-+#define _ASM_M68K_5445x_PCI_H
-+
-+#ifndef CONFIG_PCI
-+/*
-+ * The PCI address space does equal the physical memory
-+ * address space. The networking and block device layers use
-+ * this boolean for bounce buffer decisions.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS (1)
-+#else
-+#include <asm-generic/pci-dma-compat.h>
-+
-+#define PCI_DMA_BASE 0 /* PCI-DMA window base */
-+#define NL_ORIGINAL
-+/*
-+ * The PCI address space does equal the physical memory
-+ * address space. The networking and block device layers use
-+ * this boolean for bounce buffer decisions.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS (1)
-+
-+#define PCIBIOS_MIN_IO 0x00004000
-+#define PCIBIOS_MIN_MEM 0x02000000
-+
-+#define pcibios_assign_all_busses() 0
-+#define pcibios_scan_all_fns(a, b) 0
-+
-+struct pci_raw_ops {
-+ int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
-+ int reg, int len, u32 *val);
-+ int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
-+ int reg, int len, u32 val);
-+};
-+
-+extern struct pci_raw_ops *raw_pci_ops;
-+
-+static inline void
-+pcibios_set_master(struct pci_dev *dev)
-+{
-+ /* no special bus mastering setup handling */
-+}
-+
-+static inline void
-+pcibios_penalize_isa_irq(int irq, int active)
-+{
-+ /* no dynamic PCI IRQ allocation */
-+}
-+
-+#if 0
-+static inline void
-+pcibios_add_platform_entries(struct pci_dev *dev)
-+{
-+ /* no special handling */
-+}
-+#endif
-+
-+static inline void
-+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-+ struct resource *res)
-+{
-+ region->start = res->start;
-+ region->end = res->end;
-+}
-+
-+static inline void
-+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-+ struct pci_bus_region *region)
-+{
-+ res->start = region->start;
-+ res->end = region->end;
-+}
-+
-+static inline struct resource *
-+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-+{
-+ struct resource *root = NULL;
-+
-+ if (res->flags & IORESOURCE_IO)
-+ root = &ioport_resource;
-+ if (res->flags & IORESOURCE_MEM)
-+ root = &iomem_resource;
-+
-+ return root;
-+}
-+
-+#ifndef CONFIG_M54455_PCI_initcall
-+extern int pci_init(void);
-+extern int pcibios_init(void);
-+#endif
-+
-+extern void set_fpga(u32 *addr, u32 val);
-+
-+#ifdef CONFIG_M54455
-+extern int init_mcf5445x_pci(void);
-+extern void mcf5445x_conf_device(struct pci_dev *dev);
-+extern void mcf5445x_pci_dumpregs(void);
-+
-+extern struct resource pci_ioport_resource;
-+extern struct resource pci_iomem_resource;
-+#endif
-+
-+#endif /* CONFIG_PCI */
-+#endif /* _ASM_M68K_5445X_PCI_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/548x_pci.h
-@@ -0,0 +1,99 @@
-+/*
-+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Written by Wout Klaren.
-+ */
-+
-+#ifndef _ASM_M68K_548X_PCI_H
-+#define _ASM_M68K_548X_PCI_H
-+
-+#include <linux/mm.h>
-+#include <asm/scatterlist.h>
-+
-+#include <asm-generic/pci.h>
-+
-+struct pci_ops;
-+
-+/*
-+ * Structure with hardware dependent information and functions of the
-+ * PCI bus.
-+ */
-+
-+struct pci_bus_info {
-+ /*
-+ * Resources of the PCI bus.
-+ */
-+
-+ struct resource mem_space;
-+ struct resource io_space;
-+
-+ /*
-+ * System dependent functions.
-+ */
-+
-+ struct pci_ops *m68k_pci_ops;
-+
-+ void (*fixup)(int pci_modify);
-+ void (*conf_device)(struct pci_dev *dev);
-+};
-+
-+#define pcibios_assign_all_busses() 0
-+#define pcibios_scan_all_fns(a, b) 0
-+
-+static inline void pcibios_set_master(struct pci_dev *dev)
-+{
-+ /* No special bus mastering setup handling */
-+}
-+
-+static inline void pcibios_penalize_isa_irq(int irq)
-+{
-+ /* We don't do dynamic PCI IRQ allocation */
-+}
-+
-+#ifndef CONFIG_COLDFIRE
-+/* The PCI address space does equal the physical memory
-+ * address space. The networking and block device layers use
-+ * this boolean for bounce buffer decisions.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS (1)
-+
-+#define PCIBIOS_MIN_IO 0x00004000
-+#define PCIBIOS_MIN_MEM 0x04000000
-+
-+#else /* !CONFIG_COLDFIRE */
-+#include <asm-generic/pci-dma-compat.h>
-+#define PCI_DMA_BASE /*0x40000000*/0
-+/* PCI-DMA window base */
-+
-+extern struct pci_bus_info *__init init_coldfire_pci(void);
-+extern void *pci_alloc_son(struct pci_dev *, size_t,
-+ dma_addr_t *, int);
-+/*
-+ * The PCI address space equal the virtual memory
-+ * address space on m547X/m548X.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS (1)
-+
-+#define PCIBIOS_MIN_IO 0x00000100
-+#define PCIBIOS_MIN_MEM 0x02000000
-+
-+struct scatterlist;
-+
-+
-+/* This is always fine. */
-+#define pci_dac_dma_supported(pci_dev, mask) (1)
-+
-+
-+/* These macros should be used after a pci_map_sg call has been done
-+ * to get bus addresses of each of the SG entries and their lengths.
-+ * You should only work with the number of sg entries pci_map_sg
-+ * returns.
-+ */
-+#define sg_dma_address(sg) ((sg)->dma_address)
-+#define sg_dma_len(sg) ((sg)->length)
-+
-+extern void pci_dummy_function(void);
-+/*Declarations of hardware specific initialisation functions*/
-+extern struct pci_bus_info *init_hades_pci(void);
-+
-+#endif /* !CONFIG_COLDFIRE*/
-+#endif /* _ASM_M68K_548X_PCI_H */
---- a/arch/m68k/include/asm/pci.h
-+++ b/arch/m68k/include/asm/pci.h
-@@ -1,7 +1,13 @@
- #ifndef _ASM_M68K_PCI_H
- #define _ASM_M68K_PCI_H
-
-+#if defined(CONFIG_M5445X)
-+#include "5445x_pci.h"
-+#elif defined(CONFIG_M547X_8X)
-+#include "548x_pci.h"
-+#else
- #include <asm-generic/pci-dma-compat.h>
-+#endif
-
- /* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
---- /dev/null
-+++ b/arch/m68k/kernel/bios32_mcf548x.c
-@@ -0,0 +1,632 @@
-+/*
-+ * bios32.c - PCI BIOS functions for m68k systems.
-+ *
-+ * Written by Wout Klaren.
-+ *
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ * Shrek Wu B16972@freescale.com
-+ *
-+ * Based on the DEC Alpha bios32.c by Dave Rusling and David Mosberger.
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+
-+# define DBG_DEVS(args)
-+
-+#ifdef CONFIG_PCI
-+
-+/*
-+ * PCI support for Linux/m68k. Currently only the Hades is supported.
-+ *
-+ * The support for PCI bridges in the DEC Alpha version has
-+ * been removed in this version.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/slab.h>
-+#include <linux/mm.h>
-+
-+#include <asm/io.h>
-+#include <asm/pci.h>
-+#include <asm/uaccess.h>
-+
-+#define KB 1024
-+#define MB (1024*KB)
-+#define GB (1024*MB)
-+
-+#define MAJOR_REV 0
-+#define MINOR_REV 5
-+
-+/*
-+ * Align VAL to ALIGN, which must be a power of two.
-+ */
-+
-+#define MAX(val1, val2) (((val1) > (val2)) ? val1 : val2)
-+
-+/*
-+ * Offsets relative to the I/O and memory base addresses from where resources
-+ * are allocated.
-+ */
-+
-+#ifdef CONFIG_COLDFIRE
-+#define IO_ALLOC_OFFSET 0x00000100
-+#define MEM_ALLOC_OFFSET 0x00000000
-+#else /* CONFIG_COLDFIRE */
-+#define IO_ALLOC_OFFSET 0x00004000
-+#define MEM_ALLOC_OFFSET 0x04000000
-+#endif /* CONFIG_COLDFIRE */
-+
-+/*
-+ * Bus info structure of the PCI bus. A pointer to this structure is
-+ * put in the sysdata member of the pci_bus structure.
-+ */
-+
-+static struct pci_bus_info *bus_info;
-+
-+static int pci_modify = 1;
-+/* If set, layout the PCI bus ourself. */
-+static int skip_vga;
-+/* If set do not modify base addresses of vga cards.*/
-+static int disable_pci_burst;
-+/* If set do not allow PCI bursts. */
-+
-+static volatile unsigned int io_base;
-+static volatile unsigned int mem_base;
-+
-+/*
-+ * static void disable_dev(struct pci_dev *dev)
-+ *
-+ * Disable PCI device DEV so that it does not respond to I/O or memory
-+ * accesses.
-+ *
-+ * Parameters:
-+ *
-+ * dev - device to disable.
-+ */
-+
-+static void __init disable_dev(struct pci_dev *dev)
-+{
-+ unsigned short cmd;
-+
-+ if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
-+ (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
-+ (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
-+ return;
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+
-+ cmd &= (~PCI_COMMAND_IO & ~PCI_COMMAND_MEMORY & ~PCI_COMMAND_MASTER);
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+}
-+
-+/* Stolen from pcibios_enable_resources/i386 */
-+int pcibios_enable_device(struct pci_dev *dev, int mask)
-+{
-+ u16 cmd, old_cmd;
-+ int idx;
-+ struct resource *r;
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ old_cmd = cmd;
-+ for (idx = 0; idx < 6; idx++) {
-+ /* Only set up the requested stuff */
-+ if (!(mask & (1<<idx)))
-+ continue;
-+
-+ r = &dev->resource[idx];
-+ if (!r->start && r->end) {
-+ printk(KERN_ERR "PCI: Device %s not"
-+ " available because"
-+ " of resource collisions\n",
-+ dev_name(&(dev->dev)));
-+ return -EINVAL;
-+ }
-+ if (r->flags & IORESOURCE_IO)
-+ cmd |= PCI_COMMAND_IO;
-+ if (r->flags & IORESOURCE_MEM)
-+ cmd |= PCI_COMMAND_MEMORY;
-+ }
-+ if (dev->resource[PCI_ROM_RESOURCE].start)
-+ cmd |= PCI_COMMAND_MEMORY;
-+ if (cmd != old_cmd) {
-+ printk(KERN_ERR "PCI: Enabling device "
-+ "%s (%04x -> %04x)\n",
-+ dev_name(&(dev->dev)), old_cmd, cmd);
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * static void layout_dev(struct pci_dev *dev)
-+ *
-+ * Layout memory and I/O for a device.
-+ *
-+ * Parameters:
-+ *
-+ * device - device to layout memory and I/O for.
-+ */
-+
-+static void __init layout_dev(struct pci_dev *dev)
-+{
-+ unsigned short cmd;
-+ unsigned int base, mask, size, reg;
-+ unsigned int alignto;
-+ int i;
-+
-+ /*
-+ * Skip video cards if requested.
-+ */
-+ if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
-+ (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
-+ (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga) {
-+ printk(KERN_ERR "%s: VGA\n", __func__);
-+ return;
-+ }
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+
-+ for (reg = PCI_BASE_ADDRESS_0, i = 0;
-+ reg <= PCI_BASE_ADDRESS_5; reg += 4, i++) {
-+ /*
-+ * Figure out how much space and of what type this
-+ * device wants.
-+ */
-+
-+ pci_write_config_dword(dev, reg, 0xffffffff);
-+ pci_read_config_dword(dev, reg, &base);
-+ if (!base) {
-+ /* this base-address register is unused */
-+ dev->resource[i].start = 0;
-+ dev->resource[i].end = 0;
-+ dev->resource[i].flags = 0;
-+ continue;
-+ }
-+
-+ /*
-+ * We've read the base address register back after
-+ * writing all ones and so now we must decode it.
-+ */
-+ if (base & PCI_BASE_ADDRESS_SPACE_IO) {
-+ /*
-+ * I/O space base address register.
-+ */
-+
-+ cmd |= PCI_COMMAND_IO;
-+
-+ base &= PCI_BASE_ADDRESS_IO_MASK;
-+ mask = (~base << 1) | 0x1;
-+ size = (mask & base) & 0xffffffff;
-+
-+ /*
-+ * Align to multiple of size of minimum base.
-+ */
-+
-+#ifdef CONFIG_COLDFIRE
-+ alignto = MAX(PAGE_SIZE, size) ;
-+#else /* !CONFIG_COLDFIRE */
-+ alignto = MAX(0x040, size) ;
-+#endif /* CONFIG_COLDFIRE */
-+ base = ALIGN(io_base, alignto);
-+ io_base = base + size;
-+ pci_write_config_dword(dev, reg,
-+ base | PCI_BASE_ADDRESS_SPACE_IO);
-+ dev->resource[i].start = base;
-+ dev->resource[i].end =
-+ dev->resource[i].start + size - 1;
-+ dev->resource[i].flags =
-+ IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
-+
-+ DBG_DEVS(("layout_dev: IO address: %x\n", base));
-+ } else {
-+ unsigned int type;
-+
-+ /*
-+ * Memory space base address register.
-+ */
-+ cmd |= PCI_COMMAND_MEMORY;
-+
-+ type = base & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
-+ base &= PCI_BASE_ADDRESS_MEM_MASK;
-+ mask = (~base << 1) | 0x1;
-+ size = (mask & base) & 0xffffffff;
-+ switch (type) {
-+ case PCI_BASE_ADDRESS_MEM_TYPE_32:
-+ case PCI_BASE_ADDRESS_MEM_TYPE_64:
-+ break;
-+
-+ case PCI_BASE_ADDRESS_MEM_TYPE_1M:
-+ printk(KERN_INFO "bios32 WARNING: slot %d,"
-+ " function %d "
-+ "requests memory below 1MB---don't "
-+ "know how to do that.\n",
-+ PCI_SLOT(dev->devfn),
-+ PCI_FUNC(dev->devfn));
-+ continue;
-+ }
-+ DBG_DEVS(("%s MEM: base %x,type %x,mask %x,size %x\n",
-+ __func__, base, type, mask, size));
-+ /*
-+ * Align to multiple of size of minimum base.
-+ */
-+
-+ alignto = max_t(unsigned int, 0x1000, size);
-+ base = ALIGN(mem_base, alignto);
-+ mem_base = base + size;
-+ pci_write_config_dword(dev, reg, base);
-+ dev->resource[i].start = base;
-+ dev->resource[i].end =
-+ dev->resource[i].start + size - 1;
-+ dev->resource[i].flags = IORESOURCE_MEM;
-+
-+ DBG_DEVS(("%s MEM :base %x,size %x\n",
-+ __func__, base, size));
-+ if (type == PCI_BASE_ADDRESS_MEM_TYPE_64) {
-+ /*
-+ * 64-bit address, set the highest 32 bits
-+ * to zero.
-+ */
-+
-+ reg += 4;
-+ pci_write_config_dword(dev, reg, 0);
-+
-+ i++;
-+ dev->resource[i].start = 0;
-+ dev->resource[i].end = 0;
-+ dev->resource[i].flags = 0;
-+ printk(KERN_ERR "%s:type == 64\n", __func__);
-+ }
-+ }
-+ }
-+ /*
-+ * Enable device:
-+ */
-+ if (dev->class >> 8 == PCI_CLASS_NOT_DEFINED ||
-+ dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA ||
-+ dev->class >> 8 == PCI_CLASS_DISPLAY_VGA ||
-+ dev->class >> 8 == PCI_CLASS_DISPLAY_XGA) {
-+ /*
-+ * All of these (may) have I/O scattered all around
-+ * and may not use i/o-base address registers at all.
-+ * So we just have to always enable I/O to these
-+ * devices.
-+ */
-+ cmd |= PCI_COMMAND_IO;
-+ pci_write_config_word(dev, PCI_COMMAND,
-+ cmd | PCI_COMMAND_MASTER);
-+ }
-+
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER,
-+ (disable_pci_burst) ? 0 : 32);
-+
-+ if (bus_info != NULL)
-+ bus_info->conf_device(dev);
-+ /* Machine dependent configuration. */
-+
-+ printk(KERN_INFO "layout_dev: bus %d slot 0x%x "
-+ "VID 0x%x DID 0x%x class 0x%x\n",
-+ dev->bus->number, PCI_SLOT(dev->devfn),
-+ dev->vendor, dev->device, dev->class);
-+}
-+
-+/*
-+ * static void layout_bus(struct pci_bus *bus)
-+ *
-+ * Layout memory and I/O for all devices on the given bus.
-+ *
-+ * Parameters:
-+ *
-+ * bus - bus.
-+ */
-+
-+static void __init layout_bus(struct pci_bus *bus)
-+{
-+ unsigned int bio, bmem;
-+ struct pci_dev *dev;
-+
-+ DBG_DEVS(("layout_bus: starting bus %d\n", bus->number));
-+
-+ if (list_empty(&bus->devices) && list_empty(&bus->children))
-+ return;
-+
-+ /*
-+ * Align the current bases on appropriate boundaries (4K for
-+ * IO and 1MB for memory).
-+ */
-+
-+ bio = io_base = ALIGN(io_base, 4*KB);
-+ bmem = mem_base = ALIGN(mem_base, 1*MB);
-+
-+ /*
-+ * PCI devices might have been setup by a PCI BIOS emulation
-+ * running under TOS. In these cases there is a
-+ * window during which two devices may have an overlapping
-+ * address range. To avoid this causing trouble, we first
-+ * turn off the I/O and memory address decoders for all PCI
-+ * devices. They'll be re-enabled only once all address
-+ * decoders are programmed consistently.
-+ */
-+
-+ DBG_DEVS(("layout_bus: disable_dev for bus %d\n", bus->number));
-+
-+#ifdef NL_ORIGINAL
-+ for (dev = bus->devices; dev; dev = dev->sibling) {
-+#else
-+ dev = NULL;
-+ while ((dev = pci_get_device(
-+ PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-+#endif
-+ if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
-+ (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
-+ disable_dev(dev);
-+ }
-+
-+ /*
-+ * Allocate space to each device:
-+ */
-+
-+ DBG_DEVS(("layout_bus: starting bus %d devices\n", bus->number));
-+
-+#ifdef NL_ORIGINAL
-+ for (dev = bus->devices; dev; dev = dev->sibling) {
-+#else
-+ dev = NULL;
-+ while ((dev = pci_get_device(
-+ PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-+#endif
-+
-+ if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
-+ (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
-+ layout_dev(dev);
-+ }
-+
-+ DBG_DEVS(("layout_bus: bus %d finished\n", bus->number));
-+}
-+
-+/*
-+ * static void pcibios_fixup(void)
-+ *
-+ * Layout memory and I/O of all devices on the PCI bus if 'pci_modify' is
-+ * true. This might be necessary because not every m68k machine with a PCI
-+ * bus has a PCI BIOS. This function should be called right after
-+ * pci_scan_bus() in pcibios_init().
-+ */
-+
-+static void __init pcibios_fixup(void)
-+{
-+ DBG_DEVS(("%s\n", __func__));
-+ if (pci_modify) {
-+ /*
-+ * Set base addresses for allocation of I/O and memory space.
-+ */
-+
-+ io_base = bus_info->io_space.start + IO_ALLOC_OFFSET;
-+ mem_base = bus_info->mem_space.start + MEM_ALLOC_OFFSET;
-+
-+ /*
-+ * Scan the tree, allocating PCI memory and I/O space.
-+ */
-+
-+#ifdef NL_ORIGINAL
-+ layout_bus(pci_bus_b(pci_root.next));
-+#else
-+ layout_bus(pci_bus_b(pci_root_buses.next));
-+#endif
-+ }
-+
-+ /*
-+ * Fix interrupt assignments, etc.
-+ */
-+
-+ bus_info->fixup(pci_modify);
-+}
-+
-+/*
-+ * static void pcibios_claim_resources(struct pci_bus *bus)
-+ *
-+ * Claim all resources that are assigned to devices on the given bus.
-+ *
-+ * Parameters:
-+ *
-+ * bus - bus.
-+ */
-+
-+static void __init pcibios_claim_resources(struct pci_bus *bus)
-+{
-+ struct pci_dev *dev;
-+ int i;
-+ DBG_DEVS(("%s\n", __func__));
-+#ifdef NL_ORIGINAL
-+ while (bus) {
-+#else
-+ while ((bus = pci_find_next_bus(bus)) != NULL) {
-+#endif
-+
-+#ifdef NL_ORIGINAL
-+ for (dev = bus->devices; (dev != NULL);
-+ dev = dev->sibling) {
-+#else
-+ dev = NULL;
-+ while ((dev = pci_get_device(
-+ PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-+#endif
-+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-+ struct resource *r = &dev->resource[i];
-+ struct resource *pr;
-+ struct pci_bus_info *bus_info =
-+ (struct pci_bus_info *)dev->sysdata;
-+
-+ if ((r->start == 0) || (r->parent != NULL))
-+ continue;
-+
-+#ifdef CONFIG_COLDFIRE
-+ if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE)
-+ continue;
-+#endif /* CONFIG_COLDFIRE */
-+#if 1
-+ if (r->flags & IORESOURCE_IO)
-+ pr = &bus_info->io_space;
-+ else
-+ pr = &bus_info->mem_space;
-+#else
-+ if (r->flags & IORESOURCE_IO)
-+ pr = &ioport_resource;
-+ else
-+ pr = &iomem_resource;
-+#endif
-+ if (request_resource(pr, r) < 0) {
-+#ifdef NL_ORIGINAL
-+ DBG_DEVS(("PCI: Address space"
-+ " collision on "
-+ "region %d of device %s\n",
-+ i, dev->name));
-+#else
-+ printk(KERN_INFO "PCI: Address space"
-+ " collision on region %d of"
-+ " device %s\n",
-+ i, dev_name(&(dev->dev)));
-+#endif
-+ }
-+ }
-+
-+#ifdef NL_ORIGINAL
-+ }
-+ if (bus->children)
-+ pcibios_claim_resources(bus->children);
-+#else
-+ }
-+ if (!list_empty(&bus->children))
-+ pcibios_claim_resources(pci_bus_b(bus->children.next));
-+#endif
-+
-+#ifdef NL_ORIGINAL
-+ bus = bus->next;
-+#endif
-+ }
-+}
-+
-+/*
-+ * int pcibios_assign_resource(struct pci_dev *dev, int i)
-+ *
-+ * Assign a new address to a PCI resource.
-+ *
-+ * Parameters:
-+ *
-+ * dev - device.
-+ * i - resource.
-+ *
-+ * Result: 0 if successful.
-+ */
-+
-+int __init pcibios_assign_resource(struct pci_dev *dev, int i)
-+{
-+ struct resource *r = &dev->resource[i];
-+ struct resource *pr = pci_find_parent_resource(dev, r);
-+ unsigned long size = r->end + 1;
-+ DBG_DEVS(("%s:IO_ALLOC_OFFSET %x\n", __func__, IO_ALLOC_OFFSET));
-+ if (!pr)
-+ return -EINVAL;
-+
-+ if (r->flags & IORESOURCE_IO) {
-+ DBG_DEVS(("%s:IORESOURCE_IO:start %x, size %lx\n",
-+ __func__, bus_info->io_space.start, size));
-+ if (size > 0x100)
-+ return -EFBIG;
-+
-+#ifdef NL_ORIGINAL
-+ if (allocate_resource(pr, r, size, bus_info->io_space.start +
-+ IO_ALLOC_OFFSET,
-+ bus_info->io_space.end,
-+ 1024))
-+#else
-+ if (allocate_resource(pr, r, size, bus_info->io_space.start +
-+ IO_ALLOC_OFFSET,
-+ bus_info->io_space.end,
-+ 1024, NULL, NULL))
-+#endif
-+ return -EBUSY;
-+ } else {
-+ DBG_DEVS(("%s:IORESOURCE_MEM:start %x, size %lx\n",
-+ __func__, bus_info->mem_space.start, size));
-+#ifdef NL_ORIGINAL
-+ if (allocate_resource(pr, r, size, bus_info->mem_space.start +
-+ MEM_ALLOC_OFFSET,
-+ bus_info->mem_space.end, size))
-+#else
-+ if (allocate_resource(pr, r, size, bus_info->io_space.start +
-+ IO_ALLOC_OFFSET, bus_info->io_space.end,
-+ 1024, NULL, NULL))
-+#endif
-+ return -EBUSY;
-+ }
-+
-+ if (i < 6)
-+ pci_write_config_dword(dev,
-+ PCI_BASE_ADDRESS_0 + 4 * i, r->start);
-+
-+ return 0;
-+}
-+
-+void pcibios_fixup_bus(struct pci_bus *bus)
-+{
-+ struct pci_dev *dev;
-+ void *sysdata;
-+
-+ sysdata = (bus->parent) ? bus->parent->sysdata : bus->sysdata;
-+
-+#ifdef NL_ORIGINAL
-+ for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
-+#else
-+ dev = NULL;
-+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
-+#endif
-+ dev->sysdata = sysdata;
-+}
-+
-+int __init pcibios_init(void)
-+{
-+ printk(KERN_INFO "Linux/m68k PCI BIOS32 "
-+ "revision %x.%02x\n", MAJOR_REV, MINOR_REV);
-+
-+ bus_info = NULL;
-+#ifdef CONFIG_COLDFIRE
-+ bus_info = init_coldfire_pci();
-+#endif /* CONFIG_COLDFIRE */
-+#ifdef CONFIG_HADES
-+ if (MACH_IS_HADES)
-+ bus_info = init_hades_pci();
-+#endif
-+ if (bus_info != NULL) {
-+ printk(KERN_ERR "PCI: Probing PCI hardware\n");
-+ pci_scan_bus(0, bus_info->m68k_pci_ops, bus_info);
-+ pcibios_fixup();
-+#ifdef NL_ORIGINAL
-+ pcibios_claim_resources(pci_root);
-+#else
-+ pcibios_claim_resources(pci_bus_b(pci_root_buses.next));
-+#endif
-+ } else
-+ printk(KERN_ERR "PCI: No PCI bus detected\n");
-+ return 0;
-+}
-+
-+subsys_initcall(pcibios_init);
-+
-+char *pcibios_setup(char *str)
-+{
-+ if (!strcmp(str, "nomodify")) {
-+ pci_modify = 0;
-+ return NULL;
-+ } else if (!strcmp(str, "skipvga")) {
-+ skip_vga = 1;
-+ return NULL;
-+ } else if (!strcmp(str, "noburst")) {
-+ disable_pci_burst = 1;
-+ return NULL;
-+ }
-+
-+ return str;
-+}
-+#endif /* CONFIG_PCI */
---- a/drivers/pci/Makefile
-+++ b/drivers/pci/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_X86_VISWS) += setup-irq.o
- obj-$(CONFIG_MN10300) += setup-bus.o
- obj-$(CONFIG_MICROBLAZE) += setup-bus.o
- obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
-+obj-$(CONFIG_M54455) += setup-bus.o setup-irq.o
-
- #
- # ACPI Related PCI FW Functions
---- a/drivers/pci/access.c
-+++ b/drivers/pci/access.c
-@@ -25,6 +25,7 @@ static DEFINE_RAW_SPINLOCK(pci_lock);
- #define PCI_word_BAD (pos & 1)
- #define PCI_dword_BAD (pos & 3)
-
-+#ifdef NL_ORIGINAL
- #define PCI_OP_READ(size,type,len) \
- int pci_bus_read_config_##size \
- (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
-@@ -39,6 +40,23 @@ int pci_bus_read_config_##size \
- raw_spin_unlock_irqrestore(&pci_lock, flags); \
- return res; \
- }
-+#else /* NL_ORIGINAL */
-+#define PCI_OP_READ(size, type, len) \
-+ int pci_bus_read_config_##size \
-+ (struct pci_bus *bus, unsigned int devfn, \
-+ int pos, type * value) \
-+{ \
-+ int res; \
-+ unsigned long flags; \
-+ if (PCI_##size##_BAD) \
-+ return PCIBIOS_BAD_REGISTER_NUMBER; \
-+ raw_spin_lock_irqsave(&pci_lock, flags); \
-+ res = bus->ops->read( \
-+ bus, devfn, pos, len, (u32 *)value); \
-+ raw_spin_unlock_irqrestore(&pci_lock, flags); \
-+ return res; \
-+}
-+#endif /* NL_ORIGINAL */
-
- #define PCI_OP_WRITE(size,type,len) \
- int pci_bus_write_config_##size \
---- a/drivers/pci/setup-bus.c
-+++ b/drivers/pci/setup-bus.c
-@@ -77,7 +77,13 @@ static void __dev_sort_resources(struct
- u16 class = dev->class >> 8;
-
- /* Don't touch classless devices or host bridges or ioapics. */
-+#ifdef CONFIG_M5445X
-+ if (class == PCI_CLASS_NOT_DEFINED || \
-+ class == PCI_CLASS_BRIDGE_HOST || \
-+ class == PCI_CLASS_BRIDGE_OTHER)
-+#else
- if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
-+#endif
- return;
-
- /* Don't touch ioapic devices already enabled by firmware */
---- a/lib/iomap.c
-+++ b/lib/iomap.c
-@@ -227,9 +227,13 @@ EXPORT_SYMBOL(iowrite32_rep);
- /* Create a virtual mapping cookie for an IO port range */
- void __iomem *ioport_map(unsigned long port, unsigned int nr)
- {
-+#ifndef CONFIG_M54455
- if (port > PIO_MASK)
- return NULL;
- return (void __iomem *) (unsigned long) (port + PIO_OFFSET);
-+#else
-+ return (void __iomem *) (unsigned long) port;
-+#endif
- }
-
- void ioport_unmap(void __iomem *addr)
diff --git a/target/linux/coldfire/patches/040-Add-USB-support-for-MCF5445x-and-MCF54418.patch b/target/linux/coldfire/patches/040-Add-USB-support-for-MCF5445x-and-MCF54418.patch
deleted file mode 100644
index 98984be..0000000
--- a/target/linux/coldfire/patches/040-Add-USB-support-for-MCF5445x-and-MCF54418.patch
+++ /dev/null
@@ -1,7007 +0,0 @@
-From 632dc9e46a9ff032138f81fd420c0f01fd6c3cbc Mon Sep 17 00:00:00 2001
-From: Jason Jin <Jason.jin@freescale.com>
-Date: Thu, 4 Aug 2011 14:21:29 +0800
-Subject: [PATCH 40/52] Add USB support for MCF5445x and MCF54418
-
-The OTG module function with external ULPI of USB3300
-on M5445xEVB and Modelo TWR-SER2, while the Max3353 charge
-pump on Modelo TWR-SER1 with version-B CPU board only
-function FS/LS tranceiver.
-It also support USB host module on Modelo TWR-SER2.
-And the host mode on M54455EVB with FS/LS only tranceiver
-is supported by p4 interface on the board.
-
-Signed-off-by: Jingchang Lu <b35083@freescale.com>
----
- arch/m68k/Kconfig | 2 +
- arch/m68k/coldfire/m5441x/Makefile | 4 +-
- arch/m68k/coldfire/m5441x/max3353.h | 96 +++
- arch/m68k/coldfire/m5441x/max3353_otg.c | 508 +++++++++++++
- arch/m68k/coldfire/m5441x/max3353_xc.c | 310 ++++++++
- arch/m68k/coldfire/m5441x/usb.c | 276 +++++++
- arch/m68k/coldfire/m5441x/usb.h | 76 ++
- arch/m68k/coldfire/m5441x/usb_dr.c | 179 +++++
- arch/m68k/coldfire/m5441x/usb_host.c | 115 +++
- arch/m68k/coldfire/m5441x/xcvr.c | 198 +++++
- arch/m68k/coldfire/m5441x/xcvr_host.c | 53 ++
- arch/m68k/coldfire/m5445x/usb.c | 220 ++++++
- arch/m68k/coldfire/m5445x/usb.h | 107 +++
- arch/m68k/coldfire/m5445x/usb_dr.c | 152 ++++
- arch/m68k/coldfire/m5445x/xcvr.c | 127 ++++
- arch/m68k/include/asm/fsl_usb_gadget.h | 45 ++
- arch/m68k/include/asm/fsl_usb_io.h | 43 ++
- arch/m68k/include/asm/fsl_usb_platform.h | 78 ++
- drivers/Makefile | 1 +
- drivers/usb/Kconfig | 2 +
- drivers/usb/core/Kconfig | 2 +-
- drivers/usb/gadget/Kconfig | 2 +-
- drivers/usb/gadget/fsl_udc_core.c | 360 ++++++++-
- drivers/usb/gadget/fsl_usb2_udc.h | 16 +
- drivers/usb/gadget/serial.c | 40 +-
- drivers/usb/host/Kconfig | 72 ++-
- drivers/usb/host/ehci-fsl.c | 257 ++++++-
- drivers/usb/host/ehci-fsl.h | 7 +
- drivers/usb/host/ehci-hub.c | 34 +
- drivers/usb/host/ehci.h | 55 ++-
- drivers/usb/otg/Makefile | 7 +
- drivers/usb/otg/fsl_otg.c | 1212 ++++++++++++++++++++++++++++++
- drivers/usb/otg/fsl_otg.h | 423 +++++++++++
- drivers/usb/otg/otg_fsm.c | 371 +++++++++
- drivers/usb/otg/otg_fsm.h | 151 ++++
- drivers/usb/otg/usb.c | 76 ++
- include/linux/fsl_devices.h | 26 +
- include/linux/usb/fsl_usb2.h | 410 ++++++++++
- include/linux/usb/fsl_xcvr.h | 36 +
- include/linux/usb/otg.h | 2 +-
- 40 files changed, 6087 insertions(+), 64 deletions(-)
- create mode 100644 arch/m68k/coldfire/m5441x/max3353.h
- create mode 100644 arch/m68k/coldfire/m5441x/max3353_otg.c
- create mode 100644 arch/m68k/coldfire/m5441x/max3353_xc.c
- create mode 100644 arch/m68k/coldfire/m5441x/usb.c
- create mode 100644 arch/m68k/coldfire/m5441x/usb.h
- create mode 100644 arch/m68k/coldfire/m5441x/usb_dr.c
- create mode 100644 arch/m68k/coldfire/m5441x/usb_host.c
- create mode 100644 arch/m68k/coldfire/m5441x/xcvr.c
- create mode 100644 arch/m68k/coldfire/m5441x/xcvr_host.c
- create mode 100644 arch/m68k/coldfire/m5445x/usb.c
- create mode 100644 arch/m68k/coldfire/m5445x/usb.h
- create mode 100644 arch/m68k/coldfire/m5445x/usb_dr.c
- create mode 100644 arch/m68k/coldfire/m5445x/xcvr.c
- create mode 100644 arch/m68k/include/asm/fsl_usb_gadget.h
- create mode 100644 arch/m68k/include/asm/fsl_usb_io.h
- create mode 100644 arch/m68k/include/asm/fsl_usb_platform.h
- create mode 100644 drivers/usb/otg/fsl_otg.c
- create mode 100644 drivers/usb/otg/fsl_otg.h
- create mode 100644 drivers/usb/otg/otg_fsm.c
- create mode 100644 drivers/usb/otg/otg_fsm.h
- create mode 100644 drivers/usb/otg/usb.c
- create mode 100644 include/linux/usb/fsl_usb2.h
- create mode 100644 include/linux/usb/fsl_xcvr.h
-
---- a/arch/m68k/Kconfig
-+++ b/arch/m68k/Kconfig
-@@ -327,6 +327,7 @@ config M5445X
- bool "MCF5445x support"
- depends on COLDFIRE
- select GENERIC_TIME
-+ select USB_ARCH_HAS_EHCI
- select USB_EHCI_FSL
- select HAVE_FSL_USB_DR
- help
-@@ -430,6 +431,7 @@ config M5441X
- depends on COLDFIRE
- select GENERIC_TIME
- select USB_EHCI_FSL
-+ select USB_ARCH_HAS_EHCI
- select HAVE_FSL_USB_DR
- select HAVE_CAN_FLEXCAN
- help
---- a/arch/m68k/coldfire/m5441x/Makefile
-+++ b/arch/m68k/coldfire/m5441x/Makefile
-@@ -14,9 +14,11 @@ endif
- endif
-
- #ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_FSL_USB2)),)
--ifneq ($(strip $(CONFIG_USB_OTG) $(CONFIG_USB_M5441X_MAX3353_FSLS)),)
-+ifneq ($(strip $(CONFIG_USB_OTG)),)
-+ifeq ($(strip $(CONFIG_USB_M5441X_MAX3353_FSLS)),)
- obj-y += xcvr.o
- endif
-+endif
- ifneq ($(strip $(CONFIG_USB_M5441X_MAX3353_FSLS)), )
- obj-y += max3353_xc.o
- ifneq ($(strip $(CONFIG_USB_OTG)),)
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/max3353.h
-@@ -0,0 +1,96 @@
-+/*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#ifndef _MAX3353_H_
-+#define _MAX3353_H_
-+/* registers */
-+
-+/* Manufacturer registers */
-+#define MAX3353_MAN0 0x00
-+#define MAX3353_MAN1 0x01
-+#define MAX3353_MAN2 0x02
-+#define MAX3353_MAN3 0x03
-+
-+/* Product ID registers */
-+#define MAX3353_PID0 0x04
-+#define MAX3353_PID1 0x05
-+#define MAX3353_PID2 0x06
-+#define MAX3353_PID3 0x07
-+
-+/* Control register 1 */
-+#define MAX3353_CR1 0x10
-+#define CR1_DM_PULLDOWN (1 << 7)
-+#define CR1_DP_PULLDOWN (1 << 6)
-+#define CR1_DM_PULLUP (1 << 5)
-+#define CR1_DP_PULLUP (1 << 4)
-+#define CR1_BDISC_ACONN (1 << 2)
-+#define CR1_IRQ_PUSH_PULL (1 << 1)
-+
-+/* Control register 2 */
-+#define MAX3353_CR2 0x11
-+#define CR2_VBUS_DISCHRG (1 << 4)
-+#define CR2_VBUS_DRV (1 << 3)
-+#define CR2_VBUS_CHG2 (1 << 2)
-+#define CR2_VBUS_CHG1 (1 << 1)
-+#define CR2_SHUTDOWN (1 << 0)
-+
-+/* Status register */
-+#define MAX3353_STATUS 0x13
-+#define STATUS_B_HNP (1 << 6)
-+#define STATUS_A_HNP (1 << 5)
-+#define STATUS_ID_FLOAT (1 << 4)
-+#define STATUS_ID_GND (1 << 3)
-+#define STATUS_SESSION_END (1 << 2)
-+#define STATUS_SESSION_VALID (1 << 1)
-+#define STATUS_VBUS_VALID (1 << 0)
-+
-+/* Interrupt mask register */
-+#define MAX3353_INTR_MASK 0x14
-+#define IM_A_HNP_EN (1 << 5)
-+#define IM_ID_FLOAT_EN (1 << 4)
-+#define IM_ID_GND_EN (1 << 3)
-+#define IM_SESSION_END_EN (1 << 2)
-+#define IM_SESSION_VLD_EN (1 << 1)
-+#define IM_VBUS_VLD_EN (1 << 0)
-+
-+/* Interrupt edge register */
-+#define MAX3353_INTR_EDGE 0x15
-+#define IE_SESSION_VALID_ED (1 << 1)
-+#define IE_VBUS_VLD_ED (1 << 0)
-+
-+/* Interrupt latch register (read-only) */
-+#define MAX3353_INTR_LATCH 0x16
-+#define IL_A_HNP_RQ (1 << 7)
-+#define IL_ID_FLOAT_RQ (1 << 6)
-+#define IL_ID_GND_RQ (1 << 5)
-+#define IL_SESSION_END_RQ (1 << 4)
-+#define IL_SESSION_VALID_RN (1 << 3)
-+#define IL_VBUS_VALID_RN (1 << 2)
-+#define IL_SESSION_VALID_RP (1 << 1)
-+#define IL_VBUS_VALID_RP (1 << 0)
-+
-+
-+#define MAX3353_DEV_ADDR 0x2c
-+#define MAX3353_IRQ (64 + 4) /* IRQ4 */
-+
-+extern u8 max3353_read_reg(u8 reg);
-+extern void max3353_write_reg(u8 reg, u8 data);
-+extern int max3353_read_id_pin(void);
-+extern int otg_set_resources(struct resource *resources);
-+
-+#endif /* _MAX3353_H_ */
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/max3353_otg.c
-@@ -0,0 +1,508 @@
-+/*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/err.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/moduleparam.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/usb.h>
-+#include <linux/usb/gadget.h>
-+#include <linux/usb/otg.h>
-+#include <linux/workqueue.h>
-+#include <linux/time.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_usb2.h>
-+#include <linux/usb/otg.h>
-+
-+#include <asm/fsl_usb_io.h>
-+#include "max3353.h"
-+
-+#define DRIVER_VERSION "1.0"
-+#define DRIVER_AUTHOR "Freescale Semiconductor Inc."
-+#define DRIVER_DESC "Freescale MAX3353 USBOTG Driver"
-+#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
-+
-+MODULE_DESCRIPTION("Freescale MAX3353 USBOTG Driver");
-+
-+#if 0
-+#undef pr_debug
-+#define pr_debug(x...) printk(x)
-+#endif
-+
-+static const char driver_name[] = "max3353-otg";
-+
-+const pm_message_t otg_suspend_state = {
-+ .event = 1,
-+};
-+
-+static volatile struct fsl_usb_device_regs *usb_dr_regs;
-+
-+struct otg_fsm {
-+ int id; /* 0=host 1=gadget */
-+ struct otg_fsm_ops *ops;
-+ struct otg_transceiver *transceiver;
-+};
-+
-+struct otg_fsm_ops {
-+ int (*start_host)(struct otg_fsm *fsm, int on);
-+ int (*start_gadget)(struct otg_fsm *fsm, int on);
-+};
-+
-+struct max_otg {
-+ struct otg_transceiver otg;
-+ struct otg_fsm fsm;
-+ struct delayed_work otg_event;
-+ struct work_struct work_wq;
-+ u8 host_working;
-+ int irq;
-+};
-+
-+static struct max_otg *max_otg_dev;
-+
-+#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate)
-+
-+
-+/* Reset controller, not reset the bus */
-+void otg_reset_controller(void)
-+{
-+ u32 command;
-+
-+ command = fsl_readl(&usb_dr_regs->usbcmd);
-+ command |= (1 << 1);
-+ fsl_writel(command, &usb_dr_regs->usbcmd);
-+ while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
-+ ;
-+}
-+
-+
-+/* Call suspend/resume routines in host driver */
-+static int maxotg_start_host(struct otg_fsm *fsm, int on)
-+{
-+ struct otg_transceiver *xceiv = fsm->transceiver;
-+ struct device *dev;
-+ struct max_otg *otg_dev = container_of(xceiv, struct max_otg, otg);
-+ u32 retval = 0;
-+
-+ pr_debug("%s: host %s\n", __func__, on ? "on" : "off");
-+
-+ if (!xceiv->host)
-+ return -ENODEV;
-+ dev = xceiv->host->controller;
-+
-+ if (on) {
-+ /* start fsl usb host controller */
-+ if (otg_dev->host_working)
-+ goto end;
-+ else {
-+ otg_reset_controller();
-+ pr_debug("host on......\n");
-+ if (dev->driver->resume)
-+ retval = dev->driver->resume(dev);
-+
-+ otg_dev->host_working = 1;
-+ }
-+ } else {
-+ /* stop fsl usb host controller */
-+ if (!otg_dev->host_working)
-+ goto end;
-+ else {
-+ pr_debug("host off......\n");
-+ if (dev && dev->driver)
-+ retval = dev->driver->suspend(dev,
-+ otg_suspend_state);
-+ otg_dev->host_working = 0;
-+ }
-+ }
-+end:
-+ return retval;
-+}
-+
-+/* Call suspend and resume function in udc driver
-+ * to stop and start udc driver.
-+ */
-+static int maxotg_start_gadget(struct otg_fsm *fsm, int on)
-+{
-+ struct otg_transceiver *xceiv = fsm->transceiver;
-+ struct device *dev;
-+
-+ pr_debug("%s: gadget %s\n", __func__, on ? "on" : "off");
-+
-+ if (!xceiv->gadget || !xceiv->gadget->dev.parent)
-+ return -ENODEV;
-+
-+ dev = xceiv->gadget->dev.parent;
-+
-+ if (on)
-+ dev->driver->resume(dev);
-+ else
-+ dev->driver->suspend(dev, otg_suspend_state);
-+
-+ return 0;
-+}
-+
-+
-+/* delayed interrupt handler */
-+static void handle_irq(struct work_struct *work)
-+{
-+ u8 latch;
-+ int id_host;
-+ struct otg_fsm *fsm = &max_otg_dev->fsm;
-+ struct otg_transceiver *otg = &max_otg_dev->otg;
-+
-+ if (max_otg_dev == NULL)
-+ return;
-+
-+ latch = max3353_read_reg(MAX3353_INTR_LATCH);
-+
-+ if (latch) {
-+ id_host = max3353_read_id_pin();
-+ fsm->id = !id_host;
-+ pr_debug("\t\t\t%s host mode %s\n", __func__,
-+ id_host ? "ON" : "OFF");
-+
-+ if (otg->host)
-+ otg->host->is_b_host = fsm->id;
-+ if (otg->gadget)
-+ otg->gadget->is_a_peripheral = !fsm->id;
-+
-+ if (fsm->id) { /* switch to gadget */
-+ schedule_delayed_work(&max_otg_dev->otg_event, 100);
-+ } else { /* switch to host */
-+ cancel_delayed_work(&max_otg_dev->otg_event);
-+ maxotg_start_gadget(fsm, 0);
-+ maxotg_start_host(fsm, 1);
-+ }
-+ }
-+ enable_irq(MAX3353_IRQ);
-+}
-+
-+DECLARE_DELAYED_WORK(max3353_dwq, handle_irq);
-+
-+/*
-+ * MAX3353 interrupt handler
-+ *
-+ * We're interested in ID pin changes. Since we can't do i2c
-+ * operations from interrupt context, we use a delayed workqueue
-+ * routine to clear the interrupt in the MAX3353, and to handle
-+ * the role switching. The delay also allows for debouncing the
-+ * state of the ID pin. To avoid the flood of interrupts between
-+ * the irq and its processing, we disable the irq here, and re-enable
-+ * it in the delayed routine.
-+ */
-+irqreturn_t max3353_isr(int irq, void *dev_id)
-+{
-+ disable_irq(MAX3353_IRQ);
-+ schedule_delayed_work(&max3353_dwq, 25);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+/* Called by initialization code of host driver. Register host controller
-+ * to the OTG. Suspend host for OTG role detection.
-+ */
-+static int set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
-+{
-+ struct max_otg *otg_dev = container_of(otg_p, struct max_otg, otg);
-+
-+ pr_debug("%s() host %p\n", __func__, host);
-+
-+ if (!otg_p || otg_dev != max_otg_dev)
-+ return -ENODEV;
-+
-+ otg_p->host = host;
-+ if (host) {
-+ pr_debug("host off......\n");
-+
-+ /* must leave time for khubd to finish its thing
-+ * before yanking the host driver out from under it,
-+ * so suspend the host after a short delay.
-+ */
-+ otg_dev->host_working = 1;
-+ schedule_delayed_work(&otg_dev->otg_event, 100);
-+ return 0;
-+ } else { /* host driver going away */
-+ if (max3353_read_id_pin()) {
-+ /* Mini-A cable connected */
-+ otg_p->state = OTG_STATE_UNDEFINED;
-+ }
-+ }
-+
-+ otg_dev->host_working = 0;
-+
-+ return 0;
-+}
-+
-+/* Called by initialization code of udc. Register udc to OTG.*/
-+static int set_peripheral(struct otg_transceiver *otg_p,
-+ struct usb_gadget *gadget)
-+{
-+ struct max_otg *otg_dev = container_of(otg_p, struct max_otg, otg);
-+
-+ pr_debug("%s gadget %p\n", __func__, gadget);
-+
-+ pr_debug("otg_dev 0x%x\n", (int)otg_dev);
-+ pr_debug("max_otg_dev 0x%x\n", (int)max_otg_dev);
-+
-+ if (!otg_p || otg_dev != max_otg_dev)
-+ return -ENODEV;
-+
-+ if (!gadget) {
-+ if (!otg_dev->otg.default_a)
-+ otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0);
-+ usb_gadget_vbus_disconnect(otg_dev->otg.gadget);
-+ otg_dev->otg.gadget = 0;
-+ return 0;
-+ }
-+
-+ otg_p->gadget = gadget;
-+ otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id;
-+
-+ /* start the gadget right away if the ID pin says Mini-B */
-+ pr_debug("ID pin=%d\n", otg_dev->fsm.id);
-+ if (otg_dev->fsm.id == 1) {
-+ maxotg_start_host(&otg_dev->fsm, 0);
-+ maxotg_start_gadget(&otg_dev->fsm, 1);
-+ }
-+
-+ return 0;
-+}
-+
-+/* Set OTG port power, only for B-device */
-+static int set_power(struct otg_transceiver *otg_p, unsigned mA)
-+{
-+ return 0;
-+}
-+
-+/* Delayed pin detect interrupt processing.
-+ *
-+ * When the Mini-A cable is disconnected from the board,
-+ * the pin-detect interrupt happens before the disconnnect
-+ * interrupts for the connected device(s). In order to
-+ * process the disconnect interrupt(s) prior to switching
-+ * roles, the pin-detect interrupts are delayed, and handled
-+ * by this routine.
-+ */
-+static void maxotg_event(struct work_struct *work)
-+{
-+ struct max_otg *og = container_of(work, struct max_otg, otg_event.work);
-+ struct otg_fsm *fsm = &og->fsm;
-+
-+ if (fsm->id) { /* switch to gadget */
-+ maxotg_start_host(fsm, 0);
-+ maxotg_start_gadget(fsm, 1);
-+ }
-+}
-+
-+
-+static struct otg_fsm_ops maxotg_ops = {
-+ .start_host = maxotg_start_host,
-+ .start_gadget = maxotg_start_gadget,
-+};
-+
-+
-+/* Initialize the global variable max_otg_dev and request IRQ for OTG */
-+static int maxotg_conf(struct platform_device *pdev)
-+{
-+ int status;
-+ struct max_otg *max_otg_tc;
-+ struct fsl_usb2_platform_data *pdata;
-+
-+ pdata = pdev->dev.platform_data;
-+
-+ pr_debug("%s\n", __func__);
-+
-+ if (max_otg_dev)
-+ return 0;
-+
-+ /* allocate space to fsl otg device */
-+ max_otg_tc = kzalloc(sizeof(struct max_otg), GFP_KERNEL);
-+ if (!max_otg_tc)
-+ return -ENODEV;
-+
-+ INIT_DELAYED_WORK(&max_otg_tc->otg_event, maxotg_event);
-+
-+ /* Set OTG state machine operations */
-+ max_otg_tc->fsm.ops = &maxotg_ops;
-+
-+ /* initialize the otg structure */
-+ max_otg_tc->otg.label = DRIVER_DESC;
-+ max_otg_tc->otg.set_host = set_host;
-+ max_otg_tc->otg.set_peripheral = set_peripheral;
-+ max_otg_tc->otg.set_power = set_power;
-+
-+ max_otg_dev = max_otg_tc;
-+ pr_debug("%s: set max_otg_dev %p, fsm %p\n", __func__,
-+ max_otg_dev, &max_otg_dev->fsm);
-+
-+ /* Store the otg transceiver */
-+ status = otg_set_transceiver(&max_otg_tc->otg);
-+ if (status) {
-+ printk(KERN_WARNING ": unable to register OTG transceiver.\n");
-+ return status;
-+ }
-+
-+ return 0;
-+}
-+
-+/* OTG Initialization*/
-+static int maxotg_start(struct platform_device *pdev)
-+{
-+ struct max_otg *p_otg;
-+ struct otg_transceiver *otg_trans = otg_get_transceiver();
-+ struct otg_fsm *fsm;
-+ int status;
-+ struct resource *res;
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+ p_otg = container_of(otg_trans, struct max_otg, otg);
-+ fsm = &p_otg->fsm;
-+
-+ /* Initialize the state machine structure with default values */
-+ SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
-+ fsm->transceiver = &p_otg->otg;
-+
-+ /* We don't require predefined MEM/IRQ resource index */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENXIO;
-+
-+ /*
-+ * We don't request_mem_region here to enable resource sharing
-+ * with host/device
-+ */
-+ usb_dr_regs = ioremap(res->start, sizeof(struct fsl_usb_device_regs));
-+ pdata->regs = (void *)usb_dr_regs;
-+ pr_debug("ioremap %x to %p\n", res->start, pdata->regs);
-+
-+ if (pdata->init && pdata->init(pdev) != 0)
-+ return -EINVAL;
-+
-+ /* grab the irq */
-+ status = request_irq(MAX3353_IRQ, max3353_isr, IRQF_DISABLED,
-+ driver_name, p_otg);
-+ if (status) {
-+ printk(KERN_ERR "max3353: can't get IRQ, rc %d\n", status);
-+ return -EINVAL;
-+ }
-+
-+ /* enable interrupts on the part */
-+ pr_debug("%s: enabling MAX3353 interrupts\n", __func__);
-+ max3353_write_reg(MAX3353_INTR_MASK, IM_ID_GND_EN | IM_ID_FLOAT_EN);
-+
-+ /* Export DR controller resources */
-+ otg_set_resources(pdev->resource);
-+
-+ /* record initial state of ID pin */
-+ p_otg->fsm.id = !max3353_read_id_pin();
-+ if (p_otg->fsm.id)
-+ p_otg->otg.state = OTG_STATE_UNDEFINED;
-+ else
-+ p_otg->otg.state = OTG_STATE_A_IDLE;
-+
-+ pr_debug("initial ID pin: fsm.id=%d (%s)\n", p_otg->fsm.id,
-+ p_otg->fsm.id ? "gadget" : "host");
-+
-+ return 0;
-+}
-+
-+static int __init maxotg_probe(struct platform_device *pdev)
-+{
-+ int status;
-+ struct fsl_usb2_platform_data *pdata;
-+
-+ pr_debug("%s: pdev=0x%p\n", __func__, pdev);
-+
-+ if (!pdev)
-+ return -ENODEV;
-+
-+ if (!pdev->dev.platform_data)
-+ return -ENOMEM;
-+
-+ pdata = pdev->dev.platform_data;
-+ fsl_set_usb_accessors(pdata);
-+
-+ /* configure the OTG */
-+ status = maxotg_conf(pdev);
-+ if (status) {
-+ printk(KERN_INFO "Couldn't init OTG module\n");
-+ return -status;
-+ }
-+
-+ /* start OTG */
-+ status = maxotg_start(pdev);
-+
-+ return status;
-+}
-+
-+static int __exit maxotg_remove(struct platform_device *pdev)
-+{
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+ /* disable max3353 interrupts */
-+ max3353_write_reg(MAX3353_INTR_MASK, 0);
-+
-+ otg_set_transceiver(NULL);
-+ free_irq(MAX3353_IRQ, max_otg_dev);
-+
-+ iounmap((void *)usb_dr_regs);
-+
-+ kfree(max_otg_dev);
-+ max_otg_dev = NULL;
-+
-+ if (pdata->exit)
-+ pdata->exit(pdev);
-+
-+ return 0;
-+}
-+
-+struct platform_driver max3353_otg_driver = {
-+ .probe = maxotg_probe,
-+ .remove = __exit_p(maxotg_remove),
-+ .driver = {
-+ .name = driver_name,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+
-+static int __init maxotg_init(void)
-+{
-+ printk(KERN_INFO DRIVER_DESC " loaded, %s\n", DRIVER_VERSION);
-+ return platform_driver_register(&max3353_otg_driver);
-+}
-+
-+static void __exit maxotg_exit(void)
-+{
-+ platform_driver_unregister(&max3353_otg_driver);
-+ printk(KERN_INFO DRIVER_DESC " unloaded\n");
-+}
-+
-+module_init(maxotg_init);
-+module_exit(maxotg_exit);
-+
-+MODULE_DESCRIPTION(DRIVER_INFO);
-+MODULE_AUTHOR(DRIVER_AUTHOR);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/max3353_xc.c
-@@ -0,0 +1,310 @@
-+/*
-+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#define DEBUG
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/i2c.h>
-+#include <linux/usb/fsl_xcvr.h>
-+#include <asm/mcfsim.h>
-+#include "max3353.h"
-+
-+#define DRIVER_DESC "Freescale MAX3353 Driver"
-+
-+static struct i2c_device_id max3353_id[] = {
-+ {"max3353", 0},
-+ {}
-+};
-+MODULE_DEVICE_TABLE(i2c, max3353_id);
-+
-+struct max3353_state {
-+ struct i2c_client *client;
-+};
-+
-+static int max3353_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id);
-+static int __devexit max3353_remove(struct i2c_client *client);
-+
-+static struct i2c_driver max3353_i2c_driver = {
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "max3353",
-+ },
-+ .probe = max3353_probe,
-+ .remove = __devexit_p(max3353_remove),
-+ .id_table = max3353_id,
-+};
-+
-+static struct i2c_client *max3353_i2c_client;
-+
-+/* Write a max3353 register*/
-+void max3353_write_reg(u8 reg, u8 data)
-+{
-+ i2c_smbus_write_byte_data(max3353_i2c_client, reg, data);
-+}
-+EXPORT_SYMBOL(max3353_write_reg);
-+
-+/* Read a max3353 register*/
-+u8 max3353_read_reg(u8 reg)
-+{
-+ return i2c_smbus_read_byte_data(max3353_i2c_client, reg);
-+}
-+EXPORT_SYMBOL(max3353_read_reg);
-+
-+/*
-+ * max3353 I2C probe function
-+ */
-+
-+static int max3353_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct max3353_state *state;
-+ struct device *dev = &client->dev;
-+
-+ state = kzalloc(sizeof(struct max3353_state), GFP_KERNEL);
-+ if (state == NULL) {
-+ dev_err(dev, "failed to create our state\n");
-+ return -ENOMEM;
-+ }
-+
-+ state->client = client;
-+ i2c_set_clientdata(client, state);
-+
-+ max3353_i2c_client = client;
-+
-+ /* rest of the initialisation goes here. */
-+ printk(KERN_INFO "MAX3353 USB charge pump detected\n");
-+ pr_debug("MANUF:%02x %02x %02x %02x PID:%02x %02x %02x %02x\n",
-+ max3353_read_reg(MAX3353_MAN0),
-+ max3353_read_reg(MAX3353_MAN1),
-+ max3353_read_reg(MAX3353_MAN2),
-+ max3353_read_reg(MAX3353_MAN3),
-+ max3353_read_reg(MAX3353_PID0),
-+ max3353_read_reg(MAX3353_PID1),
-+ max3353_read_reg(MAX3353_PID2),
-+ max3353_read_reg(MAX3353_PID3));
-+ pr_debug("%s done\n", __func__);
-+
-+ return 0;
-+
-+}
-+
-+/*
-+ * max3353 I2C remove function
-+ */
-+static int __devexit max3353_remove(struct i2c_client *client)
-+{
-+ struct max3353_state *state = i2c_get_clientdata(client);
-+
-+ max3353_i2c_client = NULL;
-+
-+ kfree(state);
-+ return 0;
-+}
-+
-+static int max3353_running;
-+
-+static void max3353_init(struct fsl_xcvr_ops *this)
-+{
-+ int __maybe_unused rc;
-+ u8 tmp;
-+
-+ pr_debug("%s\n", __func__);
-+
-+ if (!max3353_running) {
-+ i2c_add_driver(&max3353_i2c_driver);
-+
-+ /* disable interrupts on the part */
-+ max3353_write_reg(MAX3353_INTR_MASK, 0);
-+
-+ /* configure irq mode */
-+ tmp = max3353_read_reg(MAX3353_CR1);
-+ tmp |= CR1_IRQ_PUSH_PULL;
-+ max3353_write_reg(MAX3353_CR1, tmp);
-+
-+ /* take the part out of shutdown */
-+ tmp = max3353_read_reg(MAX3353_CR2);
-+ tmp &= ~CR2_SHUTDOWN; /* turn on the part */
-+ max3353_write_reg(MAX3353_CR2, tmp);
-+ }
-+ max3353_running++;
-+#if 0
-+ /* configure INT2 for max3353 INT */
-+ MCF_GPIO_PAR_IRQ0L =
-+ (MCF_GPIO_PAR_IRQ0L & MCF_GPIO_PAR_IRQL_IRQ2_MASK) |
-+ MCF_GPIO_PAR_IRQL_IRQ2_IRQ2;
-+#else
-+ /*
-+ MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ7;
-+ MCF_EPORT_EPPAR = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_LEVEL;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
-+ MCF_INTC0_ICR7 = 2;
-+ */
-+ /* use IRQ4 on Twr-Ser1 board by J11 selected */
-+ MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ4_IRQ4;
-+ MCF_EPORT_EPPAR &= ~MCF_EPORT_EPPAR_EPPA4_LEVEL;
-+ MCF_EPORT_EPIER = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE4;
-+ MCF_INTC0_ICR4 = 7;
-+
-+#endif
-+ /* Configure USB_DP_PDOWN/USB_DM_PDOWN */
-+ MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT0;
-+ MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT1;
-+ MCF_GPIO_PDDR_I |= 0xc0;
-+ MCF_GPIO_PODR_I &= 0x3f;
-+
-+ /* Enable VBUS_EN and VBUS_OC signals */
-+ MCF_GPIO_PAR_TIMER =
-+ (MCF_GPIO_PAR_TIMER &
-+ MCF_GPIO_PAR_TIMER_T3IN_MASK) |
-+ MCF_GPIO_PAR_TIMER_T3IN_USB0_VBUSEN;
-+
-+ MCF_GPIO_PAR_TIMER =
-+ (MCF_GPIO_PAR_TIMER &
-+ MCF_GPIO_PAR_TIMER_T0IN_MASK) |
-+ MCF_GPIO_PAR_TIMER_T0IN_USBO_VBUSOC;
-+
-+ /* Setup USB_VBUS_OC signal to be active-low */
-+ MCF_CCM_MISCCR &= (~MCF_CCM_MISCCR_USBOOC);
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBPUE;
-+}
-+
-+static void max3353_uninit(struct fsl_xcvr_ops *this)
-+{
-+ pr_debug("%s\n", __func__);
-+
-+ max3353_running--;
-+ if (!max3353_running)
-+ i2c_del_driver(&max3353_i2c_driver);
-+}
-+
-+/* set max3353 as USB host */
-+static inline void max3353_set_host(void)
-+{
-+ u8 cr1, cr2, status;
-+ pr_debug("%s\n", __func__);
-+
-+ /* configure transceiver for host mode */
-+ cr1 = max3353_read_reg(MAX3353_CR1);
-+ cr2 = max3353_read_reg(MAX3353_CR2);
-+ status = max3353_read_reg(MAX3353_STATUS);
-+ pr_debug("before: CR1 %02x CR2 %02x STATUS %02x\n", cr1, cr2, status);
-+
-+ cr1 &= ~(CR1_DM_PULLDOWN | CR1_DP_PULLDOWN |
-+ CR1_DM_PULLUP | CR1_DP_PULLUP);
-+ cr1 |= (CR1_DP_PULLDOWN | CR1_DM_PULLDOWN);
-+ max3353_write_reg(MAX3353_CR1, cr1);
-+
-+ cr1 = max3353_read_reg(MAX3353_CR1);
-+ cr2 = max3353_read_reg(MAX3353_CR2);
-+ status = max3353_read_reg(MAX3353_STATUS);
-+ pr_debug(" after: CR1 %02x CR2 %02x STATUS %02x\n", cr1, cr2, status);
-+}
-+
-+/* set max3353 as USB device */
-+static inline void max3353_set_dev(void)
-+{
-+ u8 cr1;
-+ pr_debug("%s\n", __func__);
-+
-+ /* FS mode, DP pull up */
-+ cr1 = max3353_read_reg(MAX3353_CR1);
-+ cr1 &= ~(CR1_DM_PULLDOWN | CR1_DM_PULLDOWN | CR1_DP_PULLDOWN);
-+ cr1 |= CR1_DP_PULLUP;
-+ max3353_write_reg(MAX3353_CR1, cr1);
-+
-+}
-+
-+static void max3353_set_vbus_power(struct fsl_xcvr_ops *this, int on)
-+{
-+ pr_debug("%s(on=%d)\n", __func__, on);
-+}
-+
-+
-+/* Enable or disable the D+ pullup. */
-+static void max3353_pullup(int on)
-+{
-+ u8 cr1;
-+ unsigned short ccm;
-+
-+ pr_debug("%s(%d)\n", __func__, on);
-+
-+ cr1 = max3353_read_reg(MAX3353_CR1);
-+ cr1 &= ~(CR1_DM_PULLDOWN | CR1_DP_PULLDOWN |
-+ CR1_DM_PULLUP | CR1_DP_PULLUP);
-+
-+ ccm = MCF_CCM_UOCSR;
-+ if (on) {
-+ cr1 |= CR1_DP_PULLUP;
-+ ccm |= MCF_CCM_UOCSR_BVLD;
-+ ccm &= ~MCF_CCM_UOCSR_SEND;
-+ } else {
-+ ccm &= ~MCF_CCM_UOCSR_BVLD;
-+ }
-+
-+ max3353_write_reg(MAX3353_CR1, cr1);
-+ MCF_CCM_UOCSR = ccm;
-+}
-+
-+/*
-+ * return the state of the ID pin.
-+ * return: 0 Mini-B or nothing connected (Gadget mode)
-+ * 1 Mini-A connected (Host mode)
-+ */
-+int max3353_read_id_pin(void)
-+{
-+ u8 status = max3353_read_reg(MAX3353_STATUS);
-+ return !!(status & STATUS_ID_GND);
-+}
-+EXPORT_SYMBOL(max3353_read_id_pin);
-+
-+static struct fsl_xcvr_ops max3353_ops = {
-+ .name = "dr-max3353",
-+ .init = max3353_init,
-+ .uninit = max3353_uninit,
-+ .set_host = max3353_set_host,
-+ .set_device = max3353_set_dev,
-+ .set_vbus_power = max3353_set_vbus_power,
-+ .pullup = max3353_pullup,
-+};
-+
-+/* module init routine. register the transceiver */
-+static int __init max3353xc_init(void)
-+{
-+ pr_debug("%s\n", __func__);
-+
-+ fsl_usb_xcvr_register(&max3353_ops);
-+ return 0;
-+}
-+
-+static void __exit max3353xc_exit(void)
-+{
-+ pr_debug("%s\n", __func__);
-+ fsl_usb_xcvr_unregister(&max3353_ops);
-+}
-+
-+module_init(max3353xc_init);
-+module_exit(max3353xc_exit);
-+
-+MODULE_ALIAS("max3353");
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("max3353 transceiver driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/usb.c
-@@ -0,0 +1,276 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_xcvr.h>
-+#include <asm/mcfsim.h>
-+
-+#define MCF_SCM_BCR MCF_REG32(0xFC040024)
-+#define MCF_SCM_BCR_GBR (1 << 9) /* global bursts for read */
-+#define MCF_SCM_BCR_GBW (1 << 8) /* global bursts for write */
-+#define MCF_SCM_BCR_SBE_ALL (0xff << 0) /* slave burst enable */
-+
-+#define MAX_XCVR 3
-+struct fsl_xcvr_ops *g_xc_ops[MAX_XCVR] = { NULL };
-+
-+#ifdef ULPI_DEBUG
-+void print_ulpi_regs(void)
-+{
-+ pr_debug("MCF_SCM_BCR=0x%08lx MCF_CCM_MISCCR=0x%08x "
-+ "MCF_CCM_MISSCR2=0x%08x "
-+ "MCF_GPIO_PAR_TIMER=0x%08x MCF_GPIO_PAR_FEC=08%08x "
-+ "MCF_GPIO_PAR_SIMP0H=08%08x MCF_GPIO_PODR_G=08%08x\n",
-+ MCF_SCM_BCR, MCF_CCM_MISCCR,
-+ MCF_CCM_MISCCR2, MCF_GPIO_PAR_TIMER,
-+ MCF_GPIO_PAR_FEC, MCF_GPIO_PAR_SIMP0H, MCF_GPIO_PODR_G);
-+}
-+EXPORT_SYMBOL(print_ulpi_regs);
-+#endif
-+
-+static inline void fsl_usb_enable_clk(void)
-+{
-+ pr_debug("%s\n", __func__);
-+
-+#if defined(CONFIG_USB_M5441X_MAX3353_FSLS)
-+ MCF_PM_PPMCR0 = 0x30;
-+ MCF_CCM_MISCCR &= ~(MCF_CCM_MISCCR_USBOOC | MCF_CCM_MISCCR_USBHOC);
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBSRC;
-+#elif !defined(CONFIG_USB_M5441X_PLLCLK)
-+ /* Use external clock source if PLL isn't a multiple of 60MHz */
-+ MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_USBSRC;
-+
-+ /* Initialize the USB Clock: use USB input clock */
-+ MCF_GPIO_PAR_IRQ0L =
-+ (MCF_GPIO_PAR_IRQ0L &
-+ MCF_GPIO_PAR_IRQL_IRQ6_MASK) |
-+ MCF_GPIO_PAR_IRQL_IRQ6_USBCLKIN;
-+#else
-+ uint fvco, usbclk;
-+
-+ fvco = CONFIG_MCFCLK * ((MCF_PLL_DR & MCF_PLL_DR_OUTDIV1) + 1);
-+ usbclk = fvco / (((MCF_PLL_DR & MCF_PLL_DR_OUTDIV4) >> 16) + 1);
-+
-+ if (usbclk != 60000000)
-+ printk(KERN_ERR, "The usb host clock must be 60MHZ!\n\n");
-+
-+ MCF_PM_PPMCR0 = 0x30;
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBSRC;
-+#endif
-+}
-+
-+static inline void fsl_usb_disable_clk(void)
-+{
-+ pr_debug("%s\n", __func__);
-+}
-+
-+void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops)
-+{
-+ int i;
-+
-+ pr_debug("%s '%s'\n", __func__, xcvr_ops->name);
-+ for (i = 0; i < MAX_XCVR; i++) {
-+ if (g_xc_ops[i] == NULL) {
-+ g_xc_ops[i] = xcvr_ops;
-+ return;
-+ }
-+ }
-+
-+ pr_debug("%s failed\n", __func__);
-+}
-+EXPORT_SYMBOL_GPL(fsl_usb_xcvr_register);
-+
-+void fsl_usb_xcvr_unregister(struct fsl_xcvr_ops *xcvr_ops)
-+{
-+ int i;
-+
-+ pr_debug("%s '%s'\n", __func__, xcvr_ops->name);
-+ for (i = 0; i < MAX_XCVR; i++) {
-+ if (g_xc_ops[i] == xcvr_ops) {
-+ g_xc_ops[i] = NULL;
-+ return;
-+ }
-+ }
-+
-+ pr_debug("%s failed\n", __func__);
-+}
-+EXPORT_SYMBOL_GPL(fsl_usb_xcvr_unregister);
-+
-+static struct fsl_xcvr_ops *fsl_usb_get_xcvr(char *name)
-+{
-+ int i;
-+
-+ pr_debug("%s '%s'\n", __func__, name);
-+ if (name == NULL) {
-+ printk(KERN_ERR "get_xcvr(): No tranceiver name\n");
-+ return NULL;
-+ }
-+
-+ for (i = 0; i < MAX_XCVR; i++) {
-+ if (strcmp(g_xc_ops[i]->name, name) == 0)
-+ return g_xc_ops[i];
-+ }
-+ pr_debug("Failed %s\n", __func__);
-+ return NULL;
-+}
-+
-+/* The dmamask must be set for EHCI to work */
-+static u64 ehci_dmamask = ~(u32) 0;
-+
-+/*!
-+ * Register an instance of a USB host platform device.
-+ *
-+ * @param res: resource pointer
-+ * @param n_res: number of resources
-+ * @param config: config pointer
-+ *
-+ * @return newly-registered platform_device
-+ *
-+ * Each supported host interface is registered as an instance
-+ * of the "fsl-ehci" device. Call this function multiple times
-+ * to register each host interface.
-+ */
-+static int instance_id;
-+struct platform_device *host_pdev_register(struct resource *res, int n_res,
-+ struct fsl_usb2_platform_data *config)
-+{
-+ struct platform_device *pdev;
-+ int rc;
-+
-+ pr_debug("register host res=0x%p, size=%d\n", res, n_res);
-+
-+ pdev = platform_device_register_simple("fsl-ehci",
-+ instance_id, res, n_res);
-+ if (IS_ERR(pdev)) {
-+ printk(KERN_ERR "usb: can't register %s Host, %ld\n",
-+ config->name, PTR_ERR(pdev));
-+ return NULL;
-+ }
-+
-+ pdev->dev.coherent_dma_mask = 0xffffffff;
-+ pdev->dev.dma_mask = &ehci_dmamask;
-+
-+ rc = platform_device_add_data(pdev, config,
-+ sizeof(struct fsl_usb2_platform_data));
-+ if (rc) {
-+ platform_device_unregister(pdev);
-+ return NULL;
-+ }
-+
-+ printk(KERN_INFO "usb: %s host (%s) registered\n", config->name,
-+ config->transceiver);
-+ pr_debug("pdev=0x%p dev=0x%p resources=0x%p pdata=0x%p\n",
-+ pdev, &pdev->dev, pdev->resource, pdev->dev.platform_data);
-+
-+ instance_id++;
-+
-+ return pdev;
-+}
-+
-+int usb_platform_host_init(struct platform_device *pdev)
-+{
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+ struct fsl_xcvr_ops *xops;
-+
-+ xops = fsl_usb_get_xcvr(pdata->transceiver);
-+ if (!xops) {
-+ printk(KERN_ERR "DR transceiver ops missing\n");
-+ return -EINVAL;
-+ }
-+ pdata->xcvr_ops = xops;
-+ pdata->xcvr_type = xops->xcvr_type;
-+ pdata->pdev = pdev;
-+ xops->pdata = pdata;
-+
-+ if (pdata->gpio_usb_active)
-+ if (pdata->gpio_usb_active())
-+ return -EINVAL;
-+
-+ /* enable USB read, write and slave bursts */
-+ MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL;
-+ fsl_usb_enable_clk();
-+
-+ if (xops->init)
-+ xops->init(xops);
-+
-+ return 0;
-+}
-+
-+void usb_platform_host_uninit(struct platform_device *pdev)
-+{
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+ if (pdata->xcvr_ops && pdata->xcvr_ops->uninit)
-+ pdata->xcvr_ops->uninit(pdata->xcvr_ops);
-+
-+ pdata->regs = NULL;
-+
-+ if (pdata->gpio_usb_inactive)
-+ pdata->gpio_usb_inactive();
-+
-+ fsl_usb_disable_clk();
-+}
-+
-+
-+static int dr_used;
-+
-+int usb_platform_dr_init(struct platform_device *pdev)
-+{
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+ struct fsl_xcvr_ops *xops;
-+
-+ pr_debug("%s: pdev=0x%p pdata=0x%p\n", __func__, pdev, pdata);
-+
-+ xops = fsl_usb_get_xcvr(pdata->transceiver);
-+ if (!xops) {
-+ printk(KERN_ERR "DR transceiver ops missing\n");
-+ return -EINVAL;
-+ }
-+ pdata->xcvr_ops = xops;
-+ pdata->xcvr_type = xops->xcvr_type;
-+ pdata->pdev = pdev;
-+ xops->pdata = pdata;
-+
-+ /* enable USB read, write and slave bursts */
-+ MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL;
-+
-+ if (!dr_used) {
-+ fsl_usb_enable_clk();
-+
-+ if (xops->init)
-+ xops->init(xops);
-+ }
-+
-+ dr_used++;
-+ pr_debug("%s: success\n", __func__);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(usb_platform_dr_init);
-+
-+void usb_platform_dr_uninit(struct platform_device *pdev)
-+{
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+ pr_debug("%s\n", __func__);
-+
-+ dr_used--;
-+ if (!dr_used) {
-+ if (pdata->xcvr_ops && pdata->xcvr_ops->uninit)
-+ pdata->xcvr_ops->uninit(pdata->xcvr_ops);
-+
-+ pdata->regs = NULL;
-+ fsl_usb_disable_clk();
-+ }
-+}
-+EXPORT_SYMBOL_GPL(usb_platform_dr_uninit);
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/usb.h
-@@ -0,0 +1,76 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+extern int usb_platform_host_init(struct platform_device *pdev);
-+extern void usb_platform_host_uninit(struct fsl_usb2_platform_data *pdata);
-+extern int usb_platform_dr_init(struct platform_device *pdev);
-+extern void usb_platform_dr_uninit(struct fsl_usb2_platform_data *pdata);
-+extern struct platform_device *host_pdev_register(struct resource *res,
-+ int n_res, struct fsl_usb2_platform_data *config);
-+
-+
-+#if defined CONFIG_USB_EHCI_HCD || defined CONFIG_USB_EHCI_HCD_MODULE
-+static inline void dr_register_host(struct resource *r, int rs)
-+{
-+ PDATA->operating_mode = DR_HOST_MODE;
-+ host_pdev_register(r, rs, PDATA);
-+}
-+#else
-+static inline void dr_register_host(struct resource *r, int rs)
-+{
-+}
-+#endif
-+
-+#ifdef CONFIG_USB_GADGET_FSL_USB2
-+static struct platform_device dr_udc_device;
-+
-+static inline void dr_register_udc(void)
-+{
-+ PDATA->operating_mode = DR_UDC_MODE;
-+ dr_udc_device.dev.platform_data = PDATA;
-+
-+ if (platform_device_register(&dr_udc_device))
-+ printk(KERN_ERR "usb: can't register DR gadget\n");
-+ else
-+ printk(KERN_INFO "usb: DR gadget (%s) registered\n",
-+ PDATA->transceiver);
-+}
-+#else
-+static inline void dr_register_udc(void)
-+{
-+}
-+#endif
-+
-+#ifdef CONFIG_USB_OTG
-+static struct platform_device dr_otg_device;
-+
-+/*
-+ * set the proper operating_mode and
-+ * platform_data pointer, then register the
-+ * device.
-+ */
-+static inline void dr_register_otg(void)
-+{
-+ PDATA->operating_mode = FSL_USB2_DR_OTG;
-+ dr_otg_device.dev.platform_data = PDATA;
-+
-+ if (platform_device_register(&dr_otg_device))
-+ printk(KERN_ERR "usb: can't register otg device\n");
-+ else
-+ printk(KERN_INFO "usb: DR OTG registered\n");
-+}
-+#else
-+static inline void dr_register_otg(void)
-+{
-+}
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/usb_dr.c
-@@ -0,0 +1,179 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <asm/mcfsim.h>
-+
-+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
-+#define INT_USB (64 + 64 + 64 + 17) /* INTC1:17 17.2.9.1*/
-+#define INT_UOCSR (64 + 64 + 64 + 27) /* INTC1:27 17.2.9.1 */
-+
-+/*
-+ * Determine which platform_data struct to use, based on which
-+ * transceiver is configured.
-+ * PDATA is a pointer to it.
-+ */
-+#ifdef CONFIG_USB_M5441X_ULPI
-+static struct fsl_usb2_platform_data dr_config_ulpi;
-+#define PDATA (&dr_config_ulpi)
-+#else
-+static struct fsl_usb2_platform_data dr_config_fsls;
-+#define PDATA (&dr_config_fsls)
-+#endif
-+
-+/*
-+ * Used to set pdata->operating_mode before registering the platform_device.
-+ * If OTG is configured, the controller operates in OTG mode,
-+ * otherwise it's either host or device.
-+ */
-+#ifdef CONFIG_USB_OTG
-+#define DR_UDC_MODE FSL_USB2_DR_OTG
-+#define DR_HOST_MODE FSL_USB2_DR_OTG
-+#else
-+#define DR_UDC_MODE FSL_USB2_DR_DEVICE
-+#define DR_HOST_MODE FSL_USB2_DR_HOST
-+#endif
-+
-+#include "usb.h"
-+
-+/*
-+ * platform data structs
-+ * - Which one to use is determined by CONFIG options in usb.h
-+ * - operating_mode plugged at run time
-+ */
-+
-+/* off-chip ULPI transceiver */
-+static struct fsl_usb2_platform_data __maybe_unused dr_config_ulpi = {
-+ .name = "DR",
-+ .init = usb_platform_dr_init,
-+ .exit = usb_platform_dr_uninit,
-+ .phy_mode = FSL_USB2_PHY_ULPI,
-+ .transceiver = "dr-ulpi",
-+ .power_budget = 500,
-+ .es = 1,
-+ .big_endian_mmio = 1,
-+ .big_endian_desc = 1,
-+ .le_setup_buf = 1,
-+};
-+
-+/* on-chip FS/LS serial transceiver */
-+static struct fsl_usb2_platform_data __maybe_unused dr_config_fsls = {
-+ .name = "DR",
-+ .init = usb_platform_dr_init,
-+ .exit = usb_platform_dr_uninit,
-+ .phy_mode = FSL_USB2_PHY_SERIAL,
-+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
-+ .transceiver = "dr-max3353",
-+#else
-+ .transceiver = "dr-fsls",
-+#endif
-+ .power_budget = 500,
-+ .es = 1,
-+ .big_endian_mmio = 1,
-+ .big_endian_desc = 1,
-+ .le_setup_buf = 1,
-+};
-+
-+/*
-+ * resources
-+ */
-+static struct resource dr_udc_resources[] = {
-+ [0] = {
-+ .start = (u32)(&USB_OTGREGS_BASE),
-+ .end = (u32)(&USB_OTGREGS_BASE + 0x1ff),
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = INT_USB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource dr_otg_resources[] = {
-+ [0] = {
-+ .start = (u32)(&USB_OTGREGS_BASE),
-+ .end = (u32)(&USB_OTGREGS_BASE + 0x1ff),
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = INT_USB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource dr_host_resources[] = {
-+ [0] = {
-+ .start = (u32)(&USB_OTGREGS_BASE),
-+ .end = (u32)(&USB_OTGREGS_BASE + 0x1ff),
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = INT_USB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 dr_udc_dmamask = ~(u32) 0;
-+static void dr_udc_release(struct device *dev)
-+{
-+}
-+
-+static u64 dr_otg_dmamask = ~(u32) 0;
-+static void dr_otg_release(struct device *dev)
-+{
-+}
-+
-+/*
-+ * platform device structs
-+ * dev.platform_data field plugged at run time
-+ */
-+static struct platform_device __maybe_unused dr_udc_device = {
-+ .name = "fsl-usb2-udc",
-+ .id = -1,
-+ .dev = {
-+ .release = dr_udc_release,
-+ .dma_mask = &dr_udc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = dr_udc_resources,
-+ .num_resources = ARRAY_SIZE(dr_udc_resources),
-+};
-+
-+static struct platform_device __maybe_unused dr_otg_device = {
-+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
-+ .name = "max3353-otg",
-+#else
-+ .name = "fsl-usb2-otg",
-+#endif
-+ .id = -1,
-+ .dev = {
-+ .release = dr_otg_release,
-+ .dma_mask = &dr_otg_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = dr_otg_resources,
-+ .num_resources = ARRAY_SIZE(dr_otg_resources),
-+};
-+
-+static int __init usb_dr_init(void)
-+{
-+ pr_debug("%s:\n", __func__);
-+
-+ dr_register_otg();
-+ dr_register_host(dr_host_resources, ARRAY_SIZE(dr_host_resources));
-+ dr_register_udc();
-+
-+ return 0;
-+}
-+
-+module_init(usb_dr_init);
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/usb_host.c
-@@ -0,0 +1,115 @@
-+/*
-+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <asm/mcfsim.h>
-+
-+#define USB_H1REGS_BASE (0xFC0B4000)
-+#define INT_USB_HOST (64 + 64 + 64 + 18) /* INTC1:18*/
-+
-+
-+/*
-+ * Define Host module platform_data struct to use, based on which
-+ * transceiver is configured.
-+ * PDATA is a pointer to it.
-+ */
-+#if defined(CONFIG_USB_M5441X_H1_FSLS)
-+static struct fsl_usb2_platform_data h1_config_fsls;
-+#define PDATA (&h1_config_fsls)
-+#else
-+#warning "Unknow ColdFire USB Host module transceiver!"
-+#endif
-+/*
-+ * Used to set pdata->operating_mode before registering the platform_device.
-+ */
-+#define DR_UDC_MODE FSL_USB2_DR_DEVICE
-+#define DR_HOST_MODE FSL_USB2_DR_HOST
-+
-+#include "usb.h"
-+
-+static int h1_gpio_active(void)
-+{
-+ /* Configure USB_DP_PDOWN/USB_DM_PDOWN (external resistor) */
-+ MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT0;
-+ MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT1;
-+ MCF_GPIO_PDDR_I |= 0xc0;
-+ MCF_GPIO_PODR_I &= 0x3f;
-+
-+ MCF_GPIO_PAR_CS &= 0x0F; /*Enable GPIOB5, GPIOB6*/
-+
-+ MCF_GPIO_PDDR_B &= 0xDF; /*GPIOB5, input, USB_OC*/
-+ MCF_GPIO_PCR_B |= 0x0C00; /*pull up*/
-+
-+ MCF_GPIO_PDDR_B |= 0x40; /*GPIOB6, output*/
-+ MCF_GPIO_PODR_B |= 0x40; /*GPIOB6, output 1, VBUS enable*/
-+ MCF_GPIO_PCR_B &= ~0x3000; /*pull disable*/
-+
-+ return 0;
-+}
-+
-+static void h1_gpio_inactive(void)
-+{
-+ MCF_GPIO_PODR_B &= 0xBF; /*GPIOB6, output 0*/
-+}
-+
-+
-+/*
-+ * platform data struct
-+ * - operating_mode plugged at run time
-+ */
-+
-+/* on-chip FS/LS serial transceiver */
-+static struct fsl_usb2_platform_data usbh1_config = {
-+ .name = "Host1",
-+ .init = usb_platform_host_init,
-+ .exit = usb_platform_host_uninit,
-+ .operating_mode = FSL_USB2_MPH_HOST,
-+ .power_budget = 500, /* MIC2076: 500 mA max power */
-+ .phy_mode = FSL_USB2_PHY_SERIAL, /* FS/LS on-chip xcvr */
-+ .transceiver = "h1-fsls",
-+ .gpio_usb_active = h1_gpio_active,
-+ .gpio_usb_inactive = h1_gpio_inactive,
-+ .es = 1,
-+ .big_endian_mmio = 1,
-+ .big_endian_desc = 1,
-+};
-+
-+/*
-+ * resources
-+ */
-+static struct resource h1_resources[] = {
-+ [0] = {
-+ .start = USB_H1REGS_BASE,
-+ .end = USB_H1REGS_BASE + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = INT_USB_HOST,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static int __init usbh1_init(void)
-+{
-+ host_pdev_register(h1_resources, ARRAY_SIZE(h1_resources),
-+ &usbh1_config);
-+ return 0;
-+}
-+module_init(usbh1_init);
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/xcvr.c
-@@ -0,0 +1,198 @@
-+/*
-+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/delay.h>
-+#include <linux/usb/fsl_xcvr.h>
-+#include <asm/mcfsim.h>
-+
-+/* Use the configured xcvr_ops */
-+#ifdef CONFIG_USB_M5441X_ULPI
-+#define XCVR_OPS (&xcvr_ops_ulpi)
-+#elif defined CONFIG_USB_M5441X_FSLS
-+#define XCVR_OPS (&xcvr_ops_fsls)
-+#else
-+#error "Invalid USB transceiver selection."
-+#endif
-+
-+#define MCF_FEC_ENET0_RCR MCF_REG32(0xFC0D4084)
-+
-+/*
-+ * Init routine for on-chip FSLS xcvr
-+ */
-+static void xcvr_fsls_init(struct fsl_xcvr_ops *this)
-+{
-+ pr_debug("%s: name=%s\n", __func__, this->name);
-+
-+ /* Configure USB_DP_PDOWN/USB_DM_PDOWN (external resistor) */
-+ MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT0;
-+ MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT1;
-+ MCF_GPIO_PDDR_I |= 0xc0;
-+ MCF_GPIO_PODR_I &= 0x3f;
-+
-+
-+ MCF_GPIO_PAR_CS &= 0x0F; /*Enable GPIOB5, GPIOB6*/
-+
-+ MCF_GPIO_PDDR_B &= 0xDF; /*GPIOB5, input*/
-+ MCF_GPIO_PDDR_B |= 0x40; /*GPIOB6, output*/
-+
-+ MCF_GPIO_PODR_B |= 0x40; /*GPIOB6, output 1*/
-+#if 0
-+ /* Enable VBUS_EN and VBUS_OC signals */
-+ MCF_GPIO_PAR_TIMER =
-+ (MCF_GPIO_PAR_TIMER &
-+ MCF_GPIO_PAR_TIMER_T3IN_MASK) |
-+ MCF_GPIO_PAR_TIMER_T3IN_USB0_VBUSEN;
-+
-+ MCF_GPIO_PAR_TIMER =
-+ (MCF_GPIO_PAR_TIMER &
-+ MCF_GPIO_PAR_TIMER_T0IN_MASK) |
-+ MCF_GPIO_PAR_TIMER_T0IN_USBO_VBUSOC;
-+
-+ /* Setup USB_VBUS_OC signal to be active-low */
-+ MCF_CCM_MISCCR &= (~MCF_CCM_MISCCR_USBOOC);
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBPUE;
-+#endif
-+
-+}
-+
-+/*
-+ * Init routine for off-chip ULPI xcvr
-+ */
-+static void xcvr_ulpi_init(struct fsl_xcvr_ops *this)
-+{
-+ pr_debug("%s: name=%s\n", __func__, this->name);
-+
-+ /* disable FEC2 clock */
-+ MCF_PM_PPMSR0 = 54;
-+
-+ /* enable USB OTG clock*/
-+ MCF_PM_PPMCR0 = 44;
-+
-+ /* Chip select for ULPI: GPIO G4 as CS between ULPI and RMII1*/
-+ MCF_GPIO_PAR_SIMP0H =
-+ (MCF_GPIO_PAR_SIMP0H &
-+ MCF_GPIO_PAR_SIMP0H_DAT_MASK) |
-+ MCF_GPIO_PAR_SIMP0H_DAT_GPIO;
-+
-+ MCF_GPIO_PDDR_G =
-+ (MCF_GPIO_PDDR_G &
-+ MCF_GPIO_PDDR_G4_MASK) |
-+ MCF_GPIO_PDDR_G4_OUTPUT;
-+
-+ MCF_GPIO_PODR_G =
-+ (MCF_GPIO_PODR_G &
-+ MCF_GPIO_PODR_G4_MASK) |
-+ MCF_GPIO_PODR_G4_VAL;
-+
-+ /* Enable ULPI */
-+ MCF_CCM_MISCCR2 = MCF_CCM_MISCCR2 & (~MCF_CCM_MISCCR2_ULPI);
-+
-+ /* Slew rate setting for OTG */
-+ MCF_GPIO_SRCR_FEC = 0x0f;
-+ MCF_GPIO_SRCR_TIMER = 0xc3;
-+ MCF_GPIO_SRCR_IRQ0 = 0x03;
-+
-+ /* Enable the required ULPI signals */
-+ MCF_GPIO_PAR_TIMER =
-+ (MCF_GPIO_PAR_TIMER &
-+ MCF_GPIO_PAR_TIMER_T3IN_MASK) |
-+ MCF_GPIO_PAR_TIMER_T3IN_ULPI_DIR;
-+
-+ MCF_GPIO_PAR_TIMER =
-+ (MCF_GPIO_PAR_TIMER &
-+ MCF_GPIO_PAR_TIMER_T0IN_MASK) |
-+ MCF_GPIO_PAR_TIMER_T0IN_ULPI_NXT;
-+
-+ MCF_FEC_ENET0_RCR = 0x104; /* FEC0 as RMII mode */
-+
-+ MCF_GPIO_PAR_FEC =
-+ (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC_RMII0FUL_ULPI;
-+
-+
-+ pr_debug("MCF_GPIO_PAR_TIMER:0x%x, MCF_GPIO_PAR_FEC:0x%x,"
-+ "MCF_GPIO_PAR_SIMP0H:0x%x, MCF_GPIO_PDDR_G:0x%x,"
-+ "MCF_GPIO_PODR_G:0x%x, MCF_CCM_MISCCR2:0x%x\n\n",
-+ MCF_GPIO_PAR_TIMER, MCF_GPIO_PAR_FEC,
-+ MCF_GPIO_PAR_SIMP0H, MCF_GPIO_PDDR_G,
-+ MCF_GPIO_PODR_G, MCF_CCM_MISCCR2);
-+
-+ pr_debug("OTGSC:0x%lx, PORTSC:0x%lx, USBMODE:0x%lx, "
-+ "USBCMD:0x%lx, USBSTS:0x%lx, USBINTR:0x%lx, "
-+ "MCF_CCM_UOCSR:0x%x\n\n",
-+ MCF_REG32(0xfc0b01a4), MCF_REG32(0xfc0b0184),
-+ MCF_REG32(0xfc0b01a8), MCF_REG32(0xfc0b0140),
-+ MCF_REG32(0xfc0b0144), MCF_REG32(0xfc0b0148),
-+ MCF_CCM_UOCSR);
-+}
-+
-+static void xcvr_uninit(struct fsl_xcvr_ops *this)
-+{
-+ pr_debug("%s\n", __func__);
-+}
-+
-+static void xcvr_pullup(int on)
-+{
-+ unsigned short ccm = in_be16(&MCF_CCM_UOCSR);
-+
-+ pr_debug("%s(%d)\n", __func__, on);
-+
-+ ccm = in_be16(&MCF_CCM_UOCSR);
-+ if (on) {
-+ ccm |= MCF_CCM_UOCSR_BVLD;
-+ ccm &= ~MCF_CCM_UOCSR_SEND;
-+ out_be16(&MCF_CCM_UOCSR, ccm);
-+ } else {
-+ ccm &= ~MCF_CCM_UOCSR_BVLD;
-+ out_be16(&MCF_CCM_UOCSR, ccm);
-+ }
-+}
-+
-+struct fsl_xcvr_ops xcvr_ops_ulpi = {
-+ .init = xcvr_ulpi_init,
-+ .uninit = xcvr_uninit,
-+ .pullup = xcvr_pullup,
-+ .name = "dr-ulpi",
-+};
-+
-+struct fsl_xcvr_ops xcvr_ops_fsls = {
-+ .init = xcvr_fsls_init,
-+ .uninit = xcvr_uninit,
-+ .pullup = xcvr_pullup,
-+ .name = "dr-fsls",
-+};
-+
-+static int __init usb_xcvr_init(void)
-+{
-+ struct fsl_xcvr_ops *xops = XCVR_OPS;
-+
-+ pr_debug("%s %s\n", __func__, xops->name);
-+ fsl_usb_xcvr_register(xops);
-+
-+ return 0;
-+}
-+
-+static void __exit usb_xcvr_exit(void)
-+{
-+ fsl_usb_xcvr_unregister(XCVR_OPS);
-+}
-+
-+module_init(usb_xcvr_init);
-+module_exit(usb_xcvr_exit);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("External ULPI xcvr driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/m68k/coldfire/m5441x/xcvr_host.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/usb/fsl_xcvr.h>
-+#include <asm/mcfsim.h>
-+
-+/*
-+ * xcvr_ops for the on-chip xcvr on the DR controller
-+ * No ops needed.
-+ */
-+struct fsl_xcvr_ops xcvr_ops_h1_fsls = {
-+ .name = "h1-fsls",
-+};
-+
-+
-+static int __init usb_xcvr_host_init(void)
-+{
-+ fsl_usb_xcvr_register(&xcvr_ops_h1_fsls);
-+
-+ return 0;
-+}
-+
-+static void __exit usb_xcvr_host_exit(void)
-+{
-+ fsl_usb_xcvr_unregister(&xcvr_ops_h1_fsls);
-+}
-+
-+module_init(usb_xcvr_host_init);
-+module_exit(usb_xcvr_host_exit);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("On-chip FS/LS xcvr host driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/usb.c
-@@ -0,0 +1,220 @@
-+/*
-+ * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_xcvr.h>
-+#include <asm/mcfsim.h>
-+
-+#define MCF_SCM_BCR MCF_REG32(0xFC040024)
-+#define MCF_SCM_BCR_GBR (1 << 9) /* global bursts for read */
-+#define MCF_SCM_BCR_GBW (1 << 8) /* global bursts for write */
-+#define MCF_SCM_BCR_SBE_ALL (0xff << 0) /* slave burst enable */
-+
-+#define MAX_XCVR 3
-+struct fsl_xcvr_ops *g_xc_ops[MAX_XCVR] = { NULL };
-+
-+#ifdef ULPI_DEBUG
-+void print_ulpi_regs(void)
-+{
-+ pr_debug("MCF_SCM_BCR=0x%08lx MCF_CCM_MISCCR=0x%08x "
-+ "MCF_GPIO_PAR_DMA=0x%08x MCF_GPIO_PAR_USB=08%08x "
-+ "MCF_GPIO_PAR_FEC=08%08x\n",
-+ MCF_SCM_BCR, MCF_CCM_MISCCR, MCF_GPIO_PAR_DMA,
-+ MCF_GPIO_PAR_USB, MCF_GPIO_PAR_FEC);
-+}
-+EXPORT_SYMBOL(print_ulpi_regs);
-+#endif
-+
-+static inline void fsl_usb_enable_clk(void)
-+{
-+ pr_debug("%s\n", __func__);
-+
-+ /* Use external clock source if PLL isn't a multiple of 60MHz */
-+ MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_USBSRC;
-+
-+ /* Initialize the USB Clock: use USB input clock */
-+ MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA & MCF_GPIO_PAR_DMA_DREQ1_MASK) |
-+ MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN;
-+}
-+
-+static inline void fsl_usb_disable_clk(void)
-+{
-+ pr_debug("%s\n", __func__);
-+}
-+
-+void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops)
-+{
-+ int i;
-+
-+ pr_debug("%s '%s'\n", __func__, xcvr_ops->name);
-+ for (i = 0; i < MAX_XCVR; i++) {
-+ if (g_xc_ops[i] == NULL) {
-+ g_xc_ops[i] = xcvr_ops;
-+ return;
-+ }
-+ }
-+
-+ pr_debug("%s failed\n", __func__);
-+}
-+EXPORT_SYMBOL_GPL(fsl_usb_xcvr_register);
-+
-+void fsl_usb_xcvr_unregister(struct fsl_xcvr_ops *xcvr_ops)
-+{
-+ int i;
-+
-+ pr_debug("%s '%s'\n", __func__, xcvr_ops->name);
-+ for (i = 0; i < MAX_XCVR; i++) {
-+ if (g_xc_ops[i] == xcvr_ops) {
-+ g_xc_ops[i] = NULL;
-+ return;
-+ }
-+ }
-+
-+ pr_debug("%s failed\n", __func__);
-+}
-+EXPORT_SYMBOL_GPL(fsl_usb_xcvr_unregister);
-+
-+static struct fsl_xcvr_ops *fsl_usb_get_xcvr(char *name)
-+{
-+ int i;
-+
-+ pr_debug("%s '%s'\n", __func__, name);
-+ if (name == NULL) {
-+ printk(KERN_ERR "get_xcvr(): No tranceiver name\n");
-+ return NULL;
-+ }
-+
-+ for (i = 0; i < MAX_XCVR; i++) {
-+ if (strcmp(g_xc_ops[i]->name, name) == 0)
-+ return g_xc_ops[i];
-+ }
-+ pr_debug("Failed %s\n", __func__);
-+ return NULL;
-+}
-+
-+/* The dmamask must be set for EHCI to work */
-+static u64 ehci_dmamask = ~(u32) 0;
-+
-+/*!
-+ * Register an instance of a USB host platform device.
-+ *
-+ * @param res: resource pointer
-+ * @param n_res: number of resources
-+ * @param config: config pointer
-+ *
-+ * @return newly-registered platform_device
-+ *
-+ * Each supported host interface is registered as an instance
-+ * of the "fsl-ehci" device. Call this function multiple times
-+ * to register each host interface.
-+ */
-+static int instance_id;
-+struct platform_device *host_pdev_register(struct resource *res, int n_res,
-+ struct fsl_usb2_platform_data *config)
-+{
-+ struct platform_device *pdev;
-+ int rc;
-+
-+ pr_debug("register host res=0x%p, size=%d\n", res, n_res);
-+
-+ pdev = platform_device_register_simple("fsl-ehci",
-+ instance_id, res, n_res);
-+ if (IS_ERR(pdev)) {
-+ printk(KERN_ERR "usb: can't register %s Host, %ld\n",
-+ config->name, PTR_ERR(pdev));
-+ return NULL;
-+ }
-+
-+ pdev->dev.coherent_dma_mask = 0xffffffff;
-+ pdev->dev.dma_mask = &ehci_dmamask;
-+
-+ rc = platform_device_add_data(pdev, config,
-+ sizeof(struct fsl_usb2_platform_data));
-+ if (rc) {
-+ platform_device_unregister(pdev);
-+ return NULL;
-+ }
-+
-+ printk(KERN_INFO "usb: %s host (%s) registered\n", config->name,
-+ config->transceiver);
-+ pr_debug("pdev=0x%p dev=0x%p resources=0x%p pdata=0x%p\n",
-+ pdev, &pdev->dev, pdev->resource, pdev->dev.platform_data);
-+
-+ instance_id++;
-+
-+ return pdev;
-+}
-+
-+
-+static int dr_used;
-+
-+int usb_platform_dr_init(struct platform_device *pdev)
-+{
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+ struct fsl_xcvr_ops *xops;
-+
-+ pr_debug("%s: pdev=0x%p pdata=0x%p\n", __func__, pdev, pdata);
-+
-+ xops = fsl_usb_get_xcvr(pdata->transceiver);
-+ if (!xops) {
-+ printk(KERN_ERR "DR transceiver ops missing\n");
-+ return -EINVAL;
-+ }
-+ pdata->xcvr_ops = xops;
-+ pdata->xcvr_type = xops->xcvr_type;
-+ pdata->pdev = pdev;
-+ xops->pdata = pdata;
-+
-+ /* enable USB read, write and slave bursts */
-+ MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL;
-+
-+ if (!dr_used) {
-+ fsl_usb_enable_clk();
-+
-+ if (xops->init)
-+ xops->init(xops);
-+ }
-+
-+ dr_used++;
-+ pr_debug("%s: success\n", __func__);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(usb_platform_dr_init);
-+
-+void usb_platform_dr_uninit(struct platform_device *pdev)
-+{
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+ pr_debug("%s\n", __func__);
-+
-+ dr_used--;
-+ if (!dr_used) {
-+ if (pdata->xcvr_ops && pdata->xcvr_ops->uninit)
-+ pdata->xcvr_ops->uninit(pdata->xcvr_ops);
-+
-+ pdata->regs = NULL;
-+ fsl_usb_disable_clk();
-+ }
-+}
-+EXPORT_SYMBOL_GPL(usb_platform_dr_uninit);
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/usb.h
-@@ -0,0 +1,107 @@
-+/*
-+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+
-+extern int usb_platform_dr_init(struct platform_device *pdev);
-+extern void usb_platform_dr_uninit(struct fsl_usb2_platform_data *pdata);
-+extern struct platform_device *host_pdev_register(struct resource *res,
-+ int n_res, struct fsl_usb2_platform_data *config);
-+
-+
-+/*
-+ * Determine which platform_data struct to use, based on which
-+ * transceiver is configured.
-+ * PDATA is a pointer to it.
-+ */
-+#ifdef CONFIG_USB_M5445X_ULPI
-+static struct fsl_usb2_platform_data dr_config_ulpi;
-+#define PDATA (&dr_config_ulpi)
-+#else
-+static struct fsl_usb2_platform_data dr_config_fsls;
-+#define PDATA (&dr_config_fsls)
-+#endif
-+
-+/*
-+ * Used to set pdata->operating_mode before registering the platform_device.
-+ * If OTG is configured, the controller operates in OTG mode,
-+ * otherwise it's either host or device.
-+ */
-+#ifdef CONFIG_USB_OTG
-+#define DR_UDC_MODE FSL_USB2_DR_OTG
-+#define DR_HOST_MODE FSL_USB2_DR_OTG
-+#else
-+#define DR_UDC_MODE FSL_USB2_DR_DEVICE
-+#define DR_HOST_MODE FSL_USB2_DR_HOST
-+#endif
-+
-+
-+#if defined CONFIG_USB_EHCI_HCD || defined CONFIG_USB_EHCI_HCD_MODULE
-+static inline void dr_register_host(struct resource *r, int rs)
-+{
-+ PDATA->operating_mode = DR_HOST_MODE;
-+ host_pdev_register(r, rs, PDATA);
-+}
-+#else
-+static inline void dr_register_host(struct resource *r, int rs)
-+{
-+}
-+#endif
-+
-+#ifdef CONFIG_USB_GADGET_FSL_USB2
-+static struct platform_device dr_udc_device;
-+
-+static inline void dr_register_udc(void)
-+{
-+ PDATA->operating_mode = DR_UDC_MODE;
-+ dr_udc_device.dev.platform_data = PDATA;
-+
-+ if (platform_device_register(&dr_udc_device))
-+ printk(KERN_ERR "usb: can't register DR gadget\n");
-+ else
-+ printk(KERN_INFO "usb: DR gadget (%s) registered\n",
-+ PDATA->transceiver);
-+}
-+#else
-+static inline void dr_register_udc(void)
-+{
-+}
-+#endif
-+
-+#ifdef CONFIG_USB_OTG
-+static struct platform_device dr_otg_device;
-+
-+/*
-+ * set the proper operating_mode and
-+ * platform_data pointer, then register the
-+ * device.
-+ */
-+static inline void dr_register_otg(void)
-+{
-+ PDATA->operating_mode = FSL_USB2_DR_OTG;
-+ dr_otg_device.dev.platform_data = PDATA;
-+
-+ if (platform_device_register(&dr_otg_device))
-+ printk(KERN_ERR "usb: can't register otg device\n");
-+ else
-+ printk(KERN_INFO "usb: DR OTG registered\n");
-+}
-+#else
-+static inline void dr_register_otg(void)
-+{
-+}
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/usb_dr.c
-@@ -0,0 +1,152 @@
-+/*
-+ * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <asm/mcfsim.h>
-+
-+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
-+#define INT_USB (64 + 64 + 47) /* INTC1:47 16.2.9.1 */
-+#define INT_UOCSR (64 + 64 + 53) /* INTC1:53 16.2.9.1 */
-+
-+#include "usb.h"
-+
-+/*
-+ * platform data structs
-+ * - Which one to use is determined by CONFIG options in usb.h
-+ * - operating_mode plugged at run time
-+ */
-+
-+/* off-chip ULPI transceiver */
-+static struct fsl_usb2_platform_data __maybe_unused dr_config_ulpi = {
-+ .name = "DR",
-+ .init = usb_platform_dr_init,
-+ .exit = usb_platform_dr_uninit,
-+ .phy_mode = FSL_USB2_PHY_ULPI,
-+ .transceiver = "dr-ulpi",
-+ .power_budget = 500,
-+ .es = 1,
-+ .big_endian_mmio = 1,
-+ .big_endian_desc = 1,
-+ .le_setup_buf = 1,
-+};
-+
-+/* on-chip FS/LS serial transceiver */
-+static struct fsl_usb2_platform_data __maybe_unused dr_config_fsls = {
-+ .name = "DR",
-+ .init = usb_platform_dr_init,
-+ .exit = usb_platform_dr_uninit,
-+ .phy_mode = FSL_USB2_PHY_SERIAL,
-+ .transceiver = "dr-fsls",
-+ .power_budget = 500,
-+ .es = 1,
-+ .big_endian_mmio = 1,
-+ .big_endian_desc = 1,
-+ .le_setup_buf = 1,
-+};
-+
-+/*
-+ * resources
-+ */
-+static struct resource dr_host_resources[] = {
-+ [0] = {
-+ .start = (u32)(&USB_OTGREGS_BASE),
-+ .end = (u32)(&USB_OTGREGS_BASE + 0x1ff),
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = INT_USB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource dr_otg_resources[] = {
-+ [0] = {
-+ .start = (u32)(&USB_OTGREGS_BASE),
-+ .end = (u32)(&USB_OTGREGS_BASE + 0x1ff),
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = INT_USB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource dr_udc_resources[] = {
-+ [0] = {
-+ .start = (u32)(&USB_OTGREGS_BASE),
-+ .end = (u32)(&USB_OTGREGS_BASE + 0x1ff),
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = INT_USB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+static u64 dr_udc_dmamask = ~(u32) 0;
-+static void dr_udc_release(struct device *dev)
-+{
-+}
-+
-+static u64 dr_otg_dmamask = ~(u32) 0;
-+static void dr_otg_release(struct device *dev)
-+{
-+}
-+
-+/*
-+ * platform device structs
-+ * dev.platform_data field plugged at run time
-+ */
-+static struct platform_device __maybe_unused dr_udc_device = {
-+ .name = "fsl-usb2-udc",
-+ .id = -1,
-+ .dev = {
-+ .release = dr_udc_release,
-+ .dma_mask = &dr_udc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = dr_udc_resources,
-+ .num_resources = ARRAY_SIZE(dr_udc_resources),
-+};
-+
-+static struct platform_device __maybe_unused dr_otg_device = {
-+ .name = "fsl-usb2-otg",
-+ .id = -1,
-+ .dev = {
-+ .release = dr_otg_release,
-+ .dma_mask = &dr_otg_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = dr_otg_resources,
-+ .num_resources = ARRAY_SIZE(dr_otg_resources),
-+};
-+
-+static int __init usb_dr_init(void)
-+{
-+ pr_debug("%s:\n", __func__);
-+
-+ dr_register_otg();
-+ dr_register_host(dr_host_resources, ARRAY_SIZE(dr_host_resources));
-+ dr_register_udc();
-+
-+ return 0;
-+}
-+
-+module_init(usb_dr_init);
---- /dev/null
-+++ b/arch/m68k/coldfire/m5445x/xcvr.c
-@@ -0,0 +1,127 @@
-+/*
-+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/usb/fsl_xcvr.h>
-+#include <asm/mcfsim.h>
-+
-+/* Use the configured xcvr_ops */
-+#ifdef CONFIG_USB_M5445X_ULPI
-+#define XCVR_OPS (&xcvr_ops_ulpi)
-+#elif defined CONFIG_USB_M5445X_FSLS
-+#define XCVR_OPS (&xcvr_ops_fsls)
-+#else
-+#error "Invalid USB transceiver selection."
-+#endif
-+
-+/*
-+ * Init routine for on-chip FSLS xcvr
-+ */
-+static void xcvr_fsls_init(struct fsl_xcvr_ops *this)
-+{
-+ pr_debug("%s: name=%s\n", __func__, this->name);
-+
-+ /* Enable VBUS_EN and VBUS_OC signals */
-+ MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_VBUSEN |
-+ MCF_GPIO_PAR_USB_VBUSOC_VBUSOC;
-+
-+ /* Setup USB_VBUS_OC signal to be active-low */
-+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBOC;
-+}
-+
-+/*
-+ * Init routine for off-chip ULPI xcvr
-+ */
-+static void xcvr_ulpi_init(struct fsl_xcvr_ops *this)
-+{
-+ pr_debug("%s: name=%s\n", __func__, this->name);
-+
-+ /* Enable the required ULPI signals */
-+ MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA &
-+ MCF_GPIO_PAR_DMA_DACK1_MASK) |
-+ MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR;
-+
-+ MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT |
-+ MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP;
-+
-+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
-+ MCF_GPIO_PAR_FEC_FEC0_MASK) |
-+ MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI;
-+}
-+
-+static void xcvr_uninit(struct fsl_xcvr_ops *this)
-+{
-+ pr_debug("%s\n", __func__);
-+}
-+
-+static void xcvr_pullup(int on)
-+{
-+ unsigned short ccm = in_be16(&MCF_CCM_UOCSR);
-+
-+ pr_debug("%s(%d)\n", __func__, on);
-+
-+ ccm = in_be16(&MCF_CCM_UOCSR);
-+ if (on) {
-+ ccm |= MCF_CCM_UOCSR_BVLD;
-+ ccm &= ~MCF_CCM_UOCSR_SEND;
-+ out_be16(&MCF_CCM_UOCSR, ccm);
-+ } else {
-+ ccm &= ~MCF_CCM_UOCSR_BVLD;
-+ out_be16(&MCF_CCM_UOCSR, ccm);
-+ }
-+}
-+
-+struct fsl_xcvr_ops xcvr_ops_ulpi = {
-+ .init = xcvr_ulpi_init,
-+ .uninit = xcvr_uninit,
-+ .pullup = xcvr_pullup,
-+ .name = "dr-ulpi",
-+};
-+
-+struct fsl_xcvr_ops xcvr_ops_fsls = {
-+ .init = xcvr_fsls_init,
-+ .uninit = xcvr_uninit,
-+ .pullup = xcvr_pullup,
-+ .name = "dr-fsls",
-+};
-+
-+static int __init usb_xcvr_init(void)
-+{
-+ struct fsl_xcvr_ops *xops = XCVR_OPS;
-+
-+ pr_debug("%s %s\n", __func__, xops->name);
-+ fsl_usb_xcvr_register(xops);
-+
-+ return 0;
-+}
-+
-+static void __exit usb_xcvr_exit(void)
-+{
-+ fsl_usb_xcvr_unregister(XCVR_OPS);
-+}
-+
-+module_init(usb_xcvr_init);
-+module_exit(usb_xcvr_exit);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("External ULPI xcvr driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/m68k/include/asm/fsl_usb_gadget.h
-@@ -0,0 +1,45 @@
-+/*
-+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+/*
-+ * USB Gadget side, platform-specific functionality.
-+ */
-+
-+#include <linux/usb/fsl_xcvr.h>
-+
-+/* Needed for i2c/serial transceivers */
-+static inline void
-+fsl_platform_set_device_mode(struct fsl_usb2_platform_data *pdata)
-+{
-+ if (pdata->xcvr_ops && pdata->xcvr_ops->set_device)
-+ pdata->xcvr_ops->set_device();
-+}
-+
-+static inline void
-+fsl_platform_pullup_enable(struct fsl_usb2_platform_data *pdata)
-+{
-+ if (pdata->xcvr_ops && pdata->xcvr_ops->pullup)
-+ pdata->xcvr_ops->pullup(1);
-+}
-+
-+static inline void
-+fsl_platform_pullup_disable(struct fsl_usb2_platform_data *pdata)
-+{
-+ if (pdata->xcvr_ops && pdata->xcvr_ops->pullup)
-+ pdata->xcvr_ops->pullup(0);
-+}
---- /dev/null
-+++ b/arch/m68k/include/asm/fsl_usb_io.h
-@@ -0,0 +1,43 @@
-+/* Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#ifndef _FSL_USB_IO_H
-+#define _FSL_USB_IO_H
-+
-+#undef inb_p
-+#undef outb_p
-+#undef inl_p
-+#undef outl_p
-+#define inb_p in_8
-+#define outb_p(b, addr) (void)((*(__force volatile u8 *) (addr)) = (b))
-+#define inl_p in_be32
-+#define outl_p(l, addr) (void)((*(__force volatile u32 *) (addr)) = (l))
-+
-+#define fsl_readl(addr) in_be32((__force unsigned *)(addr))
-+#define fsl_writel(val32, addr) out_be32((__force unsigned *)(addr), (val32))
-+
-+static inline void fsl_set_usb_accessors(struct fsl_usb2_platform_data *pdata)
-+{
-+}
-+/*
-+#ifndef cpu_to_hc32
-+#define cpu_to_hc32(x) (x)
-+#endif
-+#ifndef hc32_to_cpu
-+#define hc32_to_cpu(x) (x)
-+#endif
-+*/
-+#endif /* _FSL_USB_IO_H */
---- /dev/null
-+++ b/arch/m68k/include/asm/fsl_usb_platform.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#ifndef FSL_USB_PLATFORM_H
-+#define FSL_USB_PLATFORM_H
-+
-+#include <linux/usb/fsl_xcvr.h>
-+#include <linux/usb/fsl_usb2.h>
-+#include <asm/mcfsim.h>
-+
-+extern struct resource *otg_get_resources(void);
-+
-+extern struct fsl_usb2_platform_data;
-+
-+/* ehci_arc_hc_driver.flags value */
-+#define FSL_PLATFORM_HC_FLAGS (HCD_USB2 | HCD_MEMORY)
-+
-+static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
-+ enum fsl_usb2_phy_modes phy_mode,
-+ unsigned int port_offset);
-+
-+static inline void fsl_platform_usb_setup(struct ehci_hcd *ehci)
-+{
-+ struct fsl_usb2_platform_data *pdata;
-+
-+ pdata = ehci_to_hcd(ehci)->self.controller->platform_data;
-+ ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
-+}
-+
-+static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd)
-+{
-+ unsigned int temp;
-+ struct fsl_usb2_platform_data *pdata;
-+ struct fsl_usb_host_regs *regs;
-+
-+ pdata = hcd->self.controller->platform_data;
-+ regs = pdata->regs;
-+
-+ if (pdata->xcvr_ops && pdata->xcvr_ops->set_host)
-+ pdata->xcvr_ops->set_host();
-+
-+ /* set host mode and select "big endian" */
-+ temp = in_be32(&regs->usbmode);
-+ temp |= USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
-+ out_be32(&regs->usbmode, temp);
-+
-+ pr_debug("%s: set usbmode to 0x%x\n\n", __func__,
-+ in_be32(&regs->usbmode));
-+
-+}
-+
-+static inline void
-+fsl_platform_set_vbus_power(struct fsl_usb2_platform_data *pdata, int on)
-+{
-+#ifdef CONFIG_USB_M5441X_FSLS
-+ MCF_GPIO_PAR_CS &= 0x0F; /*Enable GPIOB5, GPIOB6*/
-+
-+ MCF_GPIO_PDDR_B &= 0xDF; /*GPIOB5, input*/
-+ MCF_GPIO_PDDR_B |= 0x40; /*GPIOB6, output*/
-+
-+ if (on)
-+ MCF_GPIO_PODR_B |= 0x40; /*GPIOB6, output 1*/
-+ else
-+ MCF_GPIO_PODR_B &= 0xBF; /*GPIOB6, output 0*/
-+#endif
-+}
-+
-+#endif
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -66,6 +66,7 @@ obj-$(CONFIG_PARIDE) += block/paride/
- obj-$(CONFIG_TC) += tc/
- obj-$(CONFIG_UWB) += uwb/
- obj-$(CONFIG_USB_OTG_UTILS) += usb/otg/
-+obj-$(CONFIG_USB_OTG) += usb/otg/
- obj-$(CONFIG_USB) += usb/
- obj-$(CONFIG_USB_MUSB_HDRC) += usb/musb/
- obj-$(CONFIG_PCI) += usb/
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -57,6 +57,8 @@ config USB_ARCH_HAS_EHCI
- boolean
- default y if PPC_83xx
- default y if PPC_MPC512x
-+ default y if M5445X
-+ default y if M5441X
- default y if SOC_AU1200
- default y if ARCH_IXP4XX
- default y if ARCH_W90X900
---- a/drivers/usb/core/Kconfig
-+++ b/drivers/usb/core/Kconfig
-@@ -109,7 +109,7 @@ config USB_SUSPEND
- config USB_OTG
- bool "OTG support"
- depends on USB && EXPERIMENTAL
-- depends on USB_SUSPEND
-+# depends on USB_SUSPEND
- default n
- help
- The most notable feature of USB OTG is support for a
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -156,7 +156,7 @@ config USB_ATMEL_USBA
-
- config USB_GADGET_FSL_USB2
- boolean "Freescale Highspeed USB DR Peripheral Controller"
-- depends on FSL_SOC || ARCH_MXC
-+ depends on FSL_SOC || ARCH_MXC || HAVE_FSL_USB_DR
- select USB_GADGET_DUALSPEED
- select USB_FSL_MPH_DR_OF if OF
- help
---- a/drivers/usb/gadget/fsl_udc_core.c
-+++ b/drivers/usb/gadget/fsl_udc_core.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2004-2007 Freescale Semicondutor, Inc. All rights reserved.
-+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Jiang Bo <tanya.jiang@freescale.com>
-@@ -52,6 +52,12 @@
- #define DRIVER_AUTHOR "Li Yang/Jiang Bo"
- #define DRIVER_VERSION "Apr 20, 2007"
-
-+
-+#define USB_MODE_CTRL_MODE_MASK 0x00000003
-+#define USB_MODE_ES 0x00000004 /* (big) Endian */
-+#define cpu_to_hc32(x) (x)
-+#define hc32_to_cpu(x) (x)
-+
- #define DMA_ADDR_INVALID (~(dma_addr_t)0)
-
- static const char driver_name[] = "fsl-usb2-udc";
-@@ -62,6 +68,9 @@ static struct usb_dr_device *dr_regs;
- static struct usb_sys_interface *usb_sys_regs;
- #endif
-
-+static int fsl_udc_suspend(struct device *dev, pm_message_t state);
-+static int fsl_udc_resume(struct device *dev);
-+
- /* it is initialized in probe() */
- static struct fsl_udc *udc_controller = NULL;
-
-@@ -76,6 +85,7 @@ fsl_ep0_desc = {
-
- static void fsl_ep_fifo_flush(struct usb_ep *_ep);
-
-+#ifndef CONFIG_COLDFIRE
- #ifdef CONFIG_PPC32
- #define fsl_readl(addr) in_le32(addr)
- #define fsl_writel(val32, addr) out_le32(addr, val32)
-@@ -83,7 +93,7 @@ static void fsl_ep_fifo_flush(struct usb
- #define fsl_readl(addr) readl(addr)
- #define fsl_writel(val32, addr) writel(val32, addr)
- #endif
--
-+#endif
- /********************************************************************
- * Internal Used Function
- ********************************************************************/
-@@ -184,6 +194,12 @@ static int dr_controller_setup(struct fs
- unsigned long timeout;
- #define FSL_UDC_RESET_TIMEOUT 1000
-
-+#ifdef CONFIG_COLDFIRE
-+ struct fsl_usb2_platform_data *pdata;
-+ if (!udc)
-+ return -EINVAL;
-+ pdata = udc->pdata;
-+#endif
- /* Config PHY interface */
- portctrl = fsl_readl(&dr_regs->portsc1);
- portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
-@@ -226,11 +242,20 @@ static int dr_controller_setup(struct fs
-
- /* Set the controller as device mode */
- tmp = fsl_readl(&dr_regs->usbmode);
-+#ifdef CONFIG_COLDFIRE
-+ tmp &= ~USB_MODE_CTRL_MODE_MASK; /* clear mode bits */
-+#endif
- tmp |= USB_MODE_CTRL_MODE_DEVICE;
- /* Disable Setup Lockout */
- tmp |= USB_MODE_SETUP_LOCK_OFF;
-+#ifdef CONFIG_COLDFIRE
-+ if (pdata->es)
-+ tmp |= USB_MODE_ES;
-+#endif
- fsl_writel(tmp, &dr_regs->usbmode);
--
-+#ifdef CONFIG_COLDFIRE
-+ fsl_platform_set_device_mode(pdata);
-+#endif
- /* Clear the setup status */
- fsl_writel(0, &dr_regs->usbsts);
-
-@@ -243,7 +268,7 @@ static int dr_controller_setup(struct fs
- fsl_readl(&dr_regs->endpointlistaddr));
-
- /* Config control enable i/o output, cpu endian register */
--#ifndef CONFIG_ARCH_MXC
-+#if !defined(CONFIG_ARCH_MXC) && !defined(CONFIG_COLDFIRE)
- ctrl = __raw_readl(&usb_sys_regs->control);
- ctrl |= USB_CTRL_IOENB;
- __raw_writel(ctrl, &usb_sys_regs->control);
-@@ -267,7 +292,9 @@ static int dr_controller_setup(struct fs
- static void dr_controller_run(struct fsl_udc *udc)
- {
- u32 temp;
--
-+#ifdef CONFIG_COLDFIRE
-+ fsl_platform_pullup_enable(udc->pdata);
-+#endif
- /* Enable DR irq reg */
- temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN
- | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN
-@@ -277,12 +304,12 @@ static void dr_controller_run(struct fsl
-
- /* Clear stopped bit */
- udc->stopped = 0;
--
-+#ifndef CONFIG_COLDFIRE
- /* Set the controller as device mode */
- temp = fsl_readl(&dr_regs->usbmode);
- temp |= USB_MODE_CTRL_MODE_DEVICE;
- fsl_writel(temp, &dr_regs->usbmode);
--
-+#endif
- /* Set controller to Run */
- temp = fsl_readl(&dr_regs->usbcmd);
- temp |= USB_CMD_RUN_STOP;
-@@ -292,7 +319,18 @@ static void dr_controller_run(struct fsl
- static void dr_controller_stop(struct fsl_udc *udc)
- {
- unsigned int tmp;
--
-+#ifdef CONFIG_COLDFIRE
-+ if (udc->gadget.is_otg) {
-+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
-+ if (max3353_read_id_pin()) {
-+#else
-+ if (!(fsl_readl(&dr_regs->otgsc) & OTGSC_STS_USB_ID)) {
-+#endif
-+ pr_debug("udc: Leaving early\n");
-+ return;
-+ }
-+ }
-+#endif
- /* disable all INTR */
- fsl_writel(0, &dr_regs->usbintr);
-
-@@ -301,7 +339,9 @@ static void dr_controller_stop(struct fs
-
- /* disable IO output */
- /* usb_sys_regs->control = 0; */
--
-+#ifdef CONFIG_COLDFIRE
-+ fsl_platform_pullup_disable(udc->pdata);
-+#endif
- /* set controller to Stop */
- tmp = fsl_readl(&dr_regs->usbcmd);
- tmp &= ~USB_CMD_RUN_STOP;
-@@ -408,10 +448,13 @@ static void struct_ep_qh_setup(struct fs
- }
- if (zlt)
- tmp |= EP_QUEUE_HEAD_ZLT_SEL;
--
-+#ifdef CONFIG_COLDFIRE
-+ p_QH->max_pkt_length = cpu_to_hc32(tmp);
-+#else
- p_QH->max_pkt_length = cpu_to_le32(tmp);
- p_QH->next_dtd_ptr = 1;
- p_QH->size_ioc_int_sts = 0;
-+#endif
- }
-
- /* Setup qh structure and ep register for ep0. */
-@@ -616,7 +659,11 @@ static void fsl_queue_td(struct fsl_ep *
- struct fsl_req *lastreq;
- lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
- lastreq->tail->next_td_ptr =
-+#ifdef CONFIG_COLDFIRE
-+ cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
-+#else
- cpu_to_le32(req->head->td_dma & DTD_ADDR_MASK);
-+#endif
- /* Read prime bit, if 1 goto done */
- if (fsl_readl(&dr_regs->endpointprime) & bitmask)
- goto out;
-@@ -641,11 +688,19 @@ static void fsl_queue_td(struct fsl_ep *
-
- /* Write dQH next pointer and terminate bit to 0 */
- temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-+#ifdef CONFIG_COLDFIRE
-+ dQH->next_dtd_ptr = cpu_to_hc32(temp);
-+#else
- dQH->next_dtd_ptr = cpu_to_le32(temp);
--
-+#endif
- /* Clear active and halt bit */
-+#ifdef CONFIG_COLDFIRE
-+ temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
-+ | EP_QUEUE_HEAD_STATUS_HALT));
-+#else
- temp = cpu_to_le32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
- | EP_QUEUE_HEAD_STATUS_HALT));
-+#endif
- dQH->size_ioc_int_sts &= temp;
-
- /* Ensure that updates to the QH will occure before priming. */
-@@ -682,18 +737,32 @@ static struct ep_td_struct *fsl_build_dt
-
- dtd->td_dma = *dma;
- /* Clear reserved field */
-+#ifdef CONFIG_COLDFIRE
-+ swap_temp = hc32_to_cpu(dtd->size_ioc_sts);
-+#else
- swap_temp = cpu_to_le32(dtd->size_ioc_sts);
-+#endif
- swap_temp &= ~DTD_RESERVED_FIELDS;
-+#ifdef CONFIG_COLDFIRE
-+ dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
-+#else
- dtd->size_ioc_sts = cpu_to_le32(swap_temp);
--
-+#endif
- /* Init all of buffer page pointers */
- swap_temp = (u32) (req->req.dma + req->req.actual);
-+#ifdef CONFIG_COLDFIRE
-+ dtd->buff_ptr0 = cpu_to_hc32(swap_temp);
-+ dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000);
-+ dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000);
-+ dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000);
-+ dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000);
-+#else
- dtd->buff_ptr0 = cpu_to_le32(swap_temp);
- dtd->buff_ptr1 = cpu_to_le32(swap_temp + 0x1000);
- dtd->buff_ptr2 = cpu_to_le32(swap_temp + 0x2000);
- dtd->buff_ptr3 = cpu_to_le32(swap_temp + 0x3000);
- dtd->buff_ptr4 = cpu_to_le32(swap_temp + 0x4000);
--
-+#endif
- req->req.actual += *length;
-
- /* zlp is needed if req->req.zero is set */
-@@ -715,9 +784,11 @@ static struct ep_td_struct *fsl_build_dt
- /* Enable interrupt for the last dtd of a request */
- if (*is_last && !req->req.no_interrupt)
- swap_temp |= DTD_IOC;
--
-+#ifdef CONFIG_COLDFIRE
-+ dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
-+#else
- dtd->size_ioc_sts = cpu_to_le32(swap_temp);
--
-+#endif
- mb();
-
- VDBG("length = %d address= 0x%x", *length, (int)*dma);
-@@ -743,16 +814,22 @@ static int fsl_req_to_dtd(struct fsl_req
- is_first = 0;
- req->head = dtd;
- } else {
-+#ifdef CONFIG_COLDFIRE
-+ last_dtd->next_td_ptr = cpu_to_hc32(dma);
-+#else
- last_dtd->next_td_ptr = cpu_to_le32(dma);
-+#endif
- last_dtd->next_td_virt = dtd;
- }
- last_dtd = dtd;
-
- req->dtd_count++;
- } while (!is_last);
--
-+#ifdef CONFIG_COLDFIRE
-+ dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE);
-+#else
- dtd->next_td_ptr = cpu_to_le32(DTD_NEXT_TERMINATE);
--
-+#endif
- req->tail = dtd;
-
- return 0;
-@@ -963,7 +1040,39 @@ out:
-
- return status;
- }
-+#ifdef CONFIG_COLDFIRE
-+static int arcotg_fifo_status(struct usb_ep *_ep)
-+{
-+ struct fsl_ep *ep;
-+ struct fsl_udc *udc;
-+ int size = 0;
-+ u32 bitmask;
-+ struct ep_queue_head *d_qh;
-+
-+ ep = container_of(_ep, struct fsl_ep, ep);
-+ if (!_ep || (!ep->desc && ep_index(ep) != 0))
-+ return -ENODEV;
-+
-+ udc = (struct fsl_udc *)ep->udc;
-+
-+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
-+ return -ESHUTDOWN;
-+
-+ d_qh = &ep->udc->ep_qh[ep_index(ep) * 2 + ep_is_in(ep)];
-+
-+ bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) :
-+ (1 << (ep_index(ep)));
-+
-+ if (fsl_readl(&dr_regs->endptstatus) & bitmask)
-+ size = (d_qh->size_ioc_int_sts & DTD_PACKET_SIZE)
-+ >> DTD_LENGTH_BIT_POS;
-+
-+ pr_debug("%s %u\n", __func__, size);
-+ return size;
-+}
-+
-
-+#endif
- static void fsl_ep_fifo_flush(struct usb_ep *_ep)
- {
- struct fsl_ep *ep;
-@@ -1016,6 +1125,9 @@ static struct usb_ep_ops fsl_ep_ops = {
- .dequeue = fsl_ep_dequeue,
-
- .set_halt = fsl_ep_set_halt,
-+#ifdef CONFIG_COLDFIRE
-+ .fifo_status = arcotg_fifo_status,
-+#endif
- .fifo_flush = fsl_ep_fifo_flush, /* flush fifo */
- };
-
-@@ -1396,7 +1508,9 @@ static void tripwire_handler(struct fsl_
- {
- u32 temp;
- struct ep_queue_head *qh;
--
-+#ifdef CONFIG_COLDFIRE
-+ struct fsl_usb2_platform_data *pdata = udc->pdata;
-+#endif
- qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT];
-
- /* Clear bit in ENDPTSETUPSTAT */
-@@ -1410,7 +1524,20 @@ static void tripwire_handler(struct fsl_
- fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd);
-
- /* Copy the setup packet to local buffer */
-+#if CONFIG_COLDFIRE
-+ if (pdata->le_setup_buf) {
-+ u32 *p = (u32 *)buffer_ptr;
-+ u32 *s = (u32 *)qh->setup_buffer;
-+
-+ /* Convert little endian setup buffer to CPU endian */
-+ *p++ = le32_to_cpu(*s++);
-+ *p = le32_to_cpu(*s);
-+ } else {
-+ memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
-+ }
-+#else
- memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
-+#endif
- } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW));
-
- /* Clear Setup Tripwire */
-@@ -1434,19 +1561,19 @@ static int process_ep_req(struct fsl_udc
- actual = curr_req->req.length;
-
- for (j = 0; j < curr_req->dtd_count; j++) {
-- remaining_length = (le32_to_cpu(curr_td->size_ioc_sts)
-+ remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts)
- & DTD_PACKET_SIZE)
- >> DTD_LENGTH_BIT_POS;
- actual -= remaining_length;
-
-- if ((errors = le32_to_cpu(curr_td->size_ioc_sts) &
-- DTD_ERROR_MASK)) {
-+ errors = hc32_to_cpu(curr_td->size_ioc_sts);
-+ if (errors & DTD_ERROR_MASK) {
- if (errors & DTD_STATUS_HALTED) {
- ERR("dTD error %08x QH=%d\n", errors, pipe);
- /* Clear the errors and Halt condition */
-- tmp = le32_to_cpu(curr_qh->size_ioc_int_sts);
-+ tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts);
- tmp &= ~errors;
-- curr_qh->size_ioc_int_sts = cpu_to_le32(tmp);
-+ curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp);
- status = -EPIPE;
- /* FIXME: continue with next queued TD? */
-
-@@ -1464,7 +1591,7 @@ static int process_ep_req(struct fsl_udc
- ERR("Unknown error has occured (0x%x)!\n",
- errors);
-
-- } else if (le32_to_cpu(curr_td->size_ioc_sts)
-+ } else if (hc32_to_cpu(curr_td->size_ioc_sts)
- & DTD_STATUS_ACTIVE) {
- VDBG("Request not complete");
- status = REQ_UNCOMPLETE;
-@@ -1552,7 +1679,10 @@ static void dtd_complete_irq(struct fsl_
- static void port_change_irq(struct fsl_udc *udc)
- {
- u32 speed;
--
-+#ifdef CONFIG_COLDFIRE
-+ if (udc->bus_reset)
-+ udc->bus_reset = 0;
-+#endif
- /* Bus resetting is finished */
- if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
- /* Get the speed */
-@@ -1660,6 +1790,10 @@ static void reset_irq(struct fsl_udc *ud
-
- if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
- VDBG("Bus reset");
-+#ifdef CONFIG_COLDFIRE
-+ /* Bus is reseting */
-+ udc->bus_reset = 1;
-+#endif
- /* Reset all the queues, include XD, dTD, EP queue
- * head and TR Queue */
- reset_queues(udc);
-@@ -1793,19 +1927,49 @@ int usb_gadget_probe_driver(struct usb_g
- udc_controller->driver = NULL;
- goto out;
- }
--
-+#ifdef CONFIG_COLDFIRE
-+ if (udc_controller->transceiver) {
-+ /* Suspend the controller until OTG enable it */
-+ udc_controller->stopped = 1;
-+ printk(KERN_INFO "Suspend udc for OTG auto detect\n");
-+
-+ /* export udc suspend/resume call to OTG */
-+ udc_controller->gadget.dev.driver->suspend = fsl_udc_suspend;
-+ udc_controller->gadget.dev.driver->resume = fsl_udc_resume;
-+
-+ /* connect to bus through transceiver */
-+ if (udc_controller->transceiver) {
-+ retval = otg_set_peripheral(udc_controller->transceiver,
-+ &udc_controller->gadget);
-+ if (retval < 0) {
-+ ERR("can't bind to transceiver\n");
-+ driver->unbind(&udc_controller->gadget);
-+ udc_controller->gadget.dev.driver = 0;
-+ udc_controller->driver = 0;
-+ return retval;
-+ }
-+ }
-+ } else {
-+ /* Enable DR IRQ reg and Set usbcmd reg Run bit */
-+ dr_controller_run(udc_controller);
-+ udc_controller->usb_state = USB_STATE_ATTACHED;
-+ udc_controller->ep0_state = WAIT_FOR_SETUP;
-+ udc_controller->ep0_dir = 0;
-+ }
-+#else
- /* Enable DR IRQ reg and Set usbcmd reg Run bit */
- dr_controller_run(udc_controller);
- udc_controller->usb_state = USB_STATE_ATTACHED;
- udc_controller->ep0_state = WAIT_FOR_SETUP;
- udc_controller->ep0_dir = 0;
-+#endif
- printk(KERN_INFO "%s: bind to driver %s\n",
- udc_controller->gadget.name, driver->driver.name);
-
- out:
- if (retval)
- printk(KERN_WARNING "gadget driver register failed %d\n",
-- retval);
-+ retval);
- return retval;
- }
- EXPORT_SYMBOL(usb_gadget_probe_driver);
-@@ -2239,7 +2403,7 @@ static int __init fsl_udc_probe(struct p
- int ret = -ENODEV;
- unsigned int i;
- u32 dccparams;
--
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
- if (strcmp(pdev->name, driver_name)) {
- VDBG("Wrong device");
- return -ENODEV;
-@@ -2253,6 +2417,24 @@ static int __init fsl_udc_probe(struct p
-
- spin_lock_init(&udc_controller->lock);
- udc_controller->stopped = 1;
-+#ifdef CONFIG_COLDFIRE
-+ udc_controller->pdata = pdata;
-+#endif
-+#ifdef CONFIG_USB_OTG
-+ /* Memory and interrupt resources will be passed from OTG */
-+ udc_controller->transceiver = otg_get_transceiver();
-+ if (!udc_controller->transceiver) {
-+ printk(KERN_ERR "Can't find OTG driver!\n");
-+ ret = -ENODEV;
-+ goto err_kfree;
-+ }
-+
-+ res = otg_get_resources();
-+ if (!res) {
-+ DBG("resource not registered!\n");
-+ return -ENODEV;
-+ }
-+#else
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
-@@ -2266,18 +2448,30 @@ static int __init fsl_udc_probe(struct p
- ret = -EBUSY;
- goto err_kfree;
- }
--
-+#endif
- dr_regs = ioremap(res->start, resource_size(res));
- if (!dr_regs) {
- ret = -ENOMEM;
- goto err_release_mem_region;
- }
-+#ifdef CONFIG_COLDFIRE
-+ pdata->regs = (void *)dr_regs;
-+ fsl_set_usb_accessors(pdata);
-+
-+ /*
-+ * do platform specific init: check the clock, grab/config pins, etc.
-+ */
-+ if (pdata->init && pdata->init(pdev)) {
-+ ret = -ENODEV;
-+ goto err_iounmap_noclk;
-+ }
-
-+#else
- #ifndef CONFIG_ARCH_MXC
- usb_sys_regs = (struct usb_sys_interface *)
- ((u32)dr_regs + USB_DR_SYS_OFFSET);
- #endif
--
-+#endif
- /* Initialize USB clocks */
- ret = fsl_udc_clk_init(pdev);
- if (ret < 0)
-@@ -2293,8 +2487,12 @@ static int __init fsl_udc_probe(struct p
- /* Get max device endpoints */
- /* DEN is bidirectional ep number, max_ep doubles the number */
- udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2;
--
-+#ifdef CONFIG_USB_OTG
-+ res++;
-+ udc_controller->irq = res->start;
-+#else
- udc_controller->irq = platform_get_irq(pdev, 0);
-+#endif
- if (!udc_controller->irq) {
- ret = -ENODEV;
- goto err_iounmap;
-@@ -2314,11 +2512,17 @@ static int __init fsl_udc_probe(struct p
- ret = -ENOMEM;
- goto err_free_irq;
- }
--
-+#ifdef CONFIG_COLDFIRE
-+ if (!udc_controller->transceiver) {
-+ /* initialize usb hw reg except for regs for EP,
-+ * leave usbintr reg untouched */
-+ dr_controller_setup(udc_controller);
-+ }
-+#else
- /* initialize usb hw reg except for regs for EP,
- * leave usbintr reg untouched */
- dr_controller_setup(udc_controller);
--
-+#endif
- fsl_udc_clk_finalize(pdev);
-
- /* Setup gadget structure */
-@@ -2336,7 +2540,10 @@ static int __init fsl_udc_probe(struct p
- ret = device_register(&udc_controller->gadget.dev);
- if (ret < 0)
- goto err_free_irq;
--
-+#ifdef CONFIG_COLDFIRE
-+ if (udc_controller->transceiver)
-+ udc_controller->gadget.is_otg = 1;
-+#endif
- /* setup QH and epctrl for ep0 */
- ep0_setup(udc_controller);
-
-@@ -2392,7 +2599,9 @@ err_kfree:
- static int __exit fsl_udc_remove(struct platform_device *pdev)
- {
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
-+#ifdef CONFIG_COLDFIRE
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+#endif
- DECLARE_COMPLETION(done);
-
- if (!udc_controller)
-@@ -2412,31 +2621,103 @@ static int __exit fsl_udc_remove(struct
- dma_pool_destroy(udc_controller->td_pool);
- free_irq(udc_controller->irq, udc_controller);
- iounmap(dr_regs);
-+#ifndef CONFIG_USB_OTG
- release_mem_region(res->start, res->end - res->start + 1);
--
-+#endif
- device_unregister(&udc_controller->gadget.dev);
- /* free udc --wait for the release() finished */
- wait_for_completion(&done);
-+#ifdef CONFIG_COLDFIRE
-+ /*
-+ * do platform specific un-initialization:
-+ * release iomux pins, etc.
-+ */
-+ if (pdata->exit)
-+ pdata->exit(pdev);
-+
-+#endif
-+ return 0;
-+}
-+#ifdef CONFIG_COLDFIRE
-+
-+static int udc_suspend(struct fsl_udc *udc)
-+{
-+ u32 mode, usbcmd;
-+
-+ mode = fsl_readl(&dr_regs->usbmode) & USB_MODE_CTRL_MODE_MASK;
-+ usbcmd = fsl_readl(&dr_regs->usbcmd);
-+
-+ pr_debug("%s(): mode 0x%x stopped %d\n", __func__, mode, udc->stopped);
-+
-+ /*
-+ * If the controller is already stopped, then this must be a
-+ * PM suspend. Remember this fact, so that we will leave the
-+ * controller stopped at PM resume time.
-+ */
-+ if (udc->stopped) {
-+ pr_debug("gadget already stopped, leaving early\n");
-+ udc->already_stopped = 1;
-+ return 0;
-+ }
-
-+ if (mode != USB_MODE_CTRL_MODE_DEVICE) {
-+ pr_debug("gadget not in device mode, leaving early\n");
-+ return 0;
-+ }
-+
-+ printk(KERN_INFO "USB Gadget suspended\n");
-+
-+ /* stop the controller */
-+ usbcmd = fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP;
-+ fsl_writel(usbcmd, &dr_regs->usbcmd);
-+
-+ udc->stopped = 1;
- return 0;
- }
-
-+#endif
- /*-----------------------------------------------------------------
- * Modify Power management attributes
- * Used by OTG statemachine to disable gadget temporarily
- -----------------------------------------------------------------*/
-+#ifdef CONFIG_COLDFIRE
-+static int fsl_udc_suspend(struct device *dev, pm_message_t state)
-+#else
- static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state)
-+#endif
- {
-+#ifdef CONFIG_COLDFIRE
-+ return udc_suspend(udc_controller);
-+#else
- dr_controller_stop(udc_controller);
- return 0;
-+#endif
- }
-
- /*-----------------------------------------------------------------
- * Invoked on USB resume. May be called in_interrupt.
- * Here we start the DR controller and enable the irq
- *-----------------------------------------------------------------*/
-+#ifdef CONFIG_COLDFIRE
-+static int fsl_udc_resume(struct device *dev)
-+#else
- static int fsl_udc_resume(struct platform_device *pdev)
-+#endif
- {
-+#ifdef CONFIG_COLDFIRE
-+ pr_debug("%s(): stopped %d already_stopped %d\n", __func__,
-+ udc_controller->stopped, udc_controller->already_stopped);
-+
-+ /*
-+ * If the controller was stopped at suspend time, then
-+ * don't resume it now.
-+ */
-+ if (udc_controller->already_stopped) {
-+ udc_controller->already_stopped = 0;
-+ pr_debug("gadget was already stopped, leaving early\n");
-+ return 0;
-+ }
-+#endif
- /* Enable DR irq reg and set controller Run */
- if (udc_controller->stopped) {
- dr_controller_setup(udc_controller);
-@@ -2445,6 +2726,9 @@ static int fsl_udc_resume(struct platfor
- udc_controller->usb_state = USB_STATE_ATTACHED;
- udc_controller->ep0_state = WAIT_FOR_SETUP;
- udc_controller->ep0_dir = 0;
-+
-+ printk(KERN_INFO "USB Gadget resumed\n");
-+
- return 0;
- }
-
-@@ -2455,11 +2739,15 @@ static int fsl_udc_resume(struct platfor
- static struct platform_driver udc_driver = {
- .remove = __exit_p(fsl_udc_remove),
- /* these suspend and resume are not usb suspend and resume */
-+#ifndef CONFIG_COLDFIRE
- .suspend = fsl_udc_suspend,
- .resume = fsl_udc_resume,
-+#endif
- .driver = {
- .name = (char *)driver_name,
- .owner = THIS_MODULE,
-+ .suspend = fsl_udc_suspend,
-+ .resume = fsl_udc_resume,
- },
- };
-
---- a/drivers/usb/gadget/fsl_usb2_udc.h
-+++ b/drivers/usb/gadget/fsl_usb2_udc.h
-@@ -461,6 +461,7 @@ struct fsl_ep {
- struct fsl_udc {
- struct usb_gadget gadget;
- struct usb_gadget_driver *driver;
-+ struct fsl_usb2_platform_data *pdata;
- struct completion *done; /* to make sure release() is done */
- struct fsl_ep *eps;
- unsigned int max_ep;
-@@ -473,6 +474,7 @@ struct fsl_udc {
- unsigned vbus_active:1;
- unsigned stopped:1;
- unsigned remote_wakeup:1;
-+ unsigned already_stopped:1;
-
- struct ep_queue_head *ep_qh; /* Endpoints Queue-Head */
- struct fsl_req *status_req; /* ep0 status request */
-@@ -482,6 +484,7 @@ struct fsl_udc {
- size_t ep_qh_size; /* size after alignment adjustment*/
- dma_addr_t ep_qh_dma; /* dma address of QH */
-
-+ u32 bus_reset; /* Device is bus reseting */
- u32 max_pipes; /* Device max pipes */
- u32 resume_state; /* USB state to resume */
- u32 usb_state; /* USB current state */
-@@ -581,4 +584,17 @@ static inline void fsl_udc_clk_release(v
- }
- #endif
-
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/mcfsim.h>
-+#include <asm/fsl_usb_io.h>
-+#include <asm/fsl_usb_gadget.h>
-+#include <asm/cf_cacheflush.h>
-+
-+extern struct resource *otg_get_resources(void);
-+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
-+extern int max3353_read_id_pin(void);
-+#endif
-+
-+#endif
-+
- #endif
---- a/drivers/usb/gadget/serial.c
-+++ b/drivers/usb/gadget/serial.c
-@@ -4,6 +4,7 @@
- * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
- * Copyright (C) 2008 by David Brownell
- * Copyright (C) 2008 by Nokia Corporation
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
-@@ -134,7 +135,44 @@ MODULE_PARM_DESC(use_obex, "Use CDC OBEX
- static unsigned n_ports = 1;
- module_param(n_ports, uint, 0);
- MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
--
-+/*-------------------------------------------------------------------------*/
-+#if 0
-+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
-+ struct usb_request *req)
-+{
-+ struct gs_dev *dev = ep->driver_data;
-+ struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
-+
-+ switch (req->status) {
-+ case 0:
-+ /* normal completion */
-+ if (req->actual != sizeof(port->port_line_coding))
-+ usb_ep_set_halt(ep);
-+ else if (port) {
-+ struct usb_cdc_line_coding *value = req->buf;
-+
-+ /* REVISIT: we currently just remember this data.
-+ * If we change that, (a) validate it first, then
-+ * (b) update whatever hardware needs updating.
-+ */
-+ spin_lock(&port->port_lock);
-+ port->port_line_coding = *value;
-+ spin_unlock(&port->port_lock);
-+ }
-+ break;
-+
-+ case -ESHUTDOWN:
-+ /* disconnect */
-+ gs_free_req(ep, req);
-+ break;
-+
-+ default:
-+ /* unexpected */
-+ break;
-+ }
-+ return;
-+}
-+#endif
- /*-------------------------------------------------------------------------*/
-
- static int __init serial_bind_config(struct usb_configuration *c)
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -95,13 +95,14 @@ config USB_EHCI_BIG_ENDIAN_MMIO
- bool
- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
- ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-- PPC_MPC512x || CPU_CAVIUM_OCTEON)
-+ PPC_MPC512x || CPU_CAVIUM_OCTEON || \
-+ COLDFIRE)
- default y
-
- config USB_EHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-- PPC_MPC512x)
-+ PPC_MPC512x || COLDFIRE)
- default y
-
- config XPS_USB_HCD_XILINX
-@@ -120,12 +121,77 @@ config USB_FSL_MPH_DR_OF
-
- config USB_EHCI_FSL
- bool "Support for Freescale on-chip EHCI USB controller"
-- depends on USB_EHCI_HCD && FSL_SOC
-+ depends on USB_EHCI_HCD && (FSL_SOC || COLDFIRE)
- select USB_EHCI_ROOT_HUB_TT
- select USB_FSL_MPH_DR_OF if OF
- ---help---
- Variation of ARC USB block used in some Freescale chips.
-
-+config USB_M5441X_PLLCLK
-+ bool "ColdFire USB module use PLL clock source"
-+ depends on M5441X
-+ ---help---
-+ Select USB clock source from PLL instead external USBCLKIN,
-+ to generate the exact USB module 60MHZ clock, the system clock
-+ must be shrink to match the divide requirement which is down
-+ in u-boot.
-+
-+config USB_M5441X_H1
-+ bool "ColdFire EHCI USB Host module support"
-+ depends on USB_EHCI_HCD && M5441X
-+ ---help---
-+ Some ColdFire platform have two USB controllers, one is HOST module,
-+ the other is OTG module, this config select the HOST module support.
-+
-+choice
-+ prompt "Selcet ColdFire HOST module transceiver"
-+ depends on USB_M5441X_H1
-+ default USB_M5441X_H1_FSLS
-+
-+config USB_M5441X_H1_FSLS
-+ bool "on-chip (FS/LS only)"
-+ depends on M5441X
-+ ---help---
-+ Enable support for the on-chip FS/LS transceiver.
-+endchoice
-+
-+choice
-+ prompt "Select ColdiFire OTG module transceiver"
-+ depends on M5445X || M5441X
-+ default USB_M5445X_ULPI if M5445X
-+ default USB_M5441X_ULPI if M5441X
-+
-+config USB_M5445X_ULPI
-+ bool "External ULPI"
-+ depends on M5445X
-+ ---help---
-+ Enable support for the external HS ULPI transceiver.
-+
-+config USB_M5445X_FSLS
-+ bool "On-chip (FL/LS only)"
-+ depends on M54455EVB
-+ ---help---
-+ Enable support for the on-chip FL/LS transceiver.
-+
-+config USB_M5441X_ULPI
-+ bool "External ULPI"
-+ depends on M5441X
-+ ---help---
-+ Enable support for the external HS ULPI transceiver.
-+
-+config USB_M5441X_FSLS
-+ bool "On-chip (FL/LS only)"
-+ depends on M54418EVB
-+ ---help---
-+ Enable support for the on-chip FL/LS transceiver.
-+
-+config USB_M5441X_MAX3353_FSLS
-+ bool "MAX3353 chip charge pump to on-chip (FS/LS only)"
-+ depends on M54418EVB
-+ ---help---
-+ Max3353 provides charge pump for SER1 board on m54418 platform.
-+endchoice
-+
- config USB_EHCI_MXC
- bool "Support for Freescale on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && ARCH_MXC
---- a/drivers/usb/host/ehci-fsl.c
-+++ b/drivers/usb/host/ehci-fsl.c
-@@ -22,16 +22,21 @@
- * Jerry Huang <Chang-Ming.Huang@freescale.com> and
- * Anton Vorontsov <avorontsov@ru.mvista.com>.
- */
--
- #include <linux/kernel.h>
- #include <linux/types.h>
- #include <linux/delay.h>
- #include <linux/pm.h>
- #include <linux/platform_device.h>
- #include <linux/fsl_devices.h>
--
-+#include <linux/usb/otg.h>
- #include "ehci-fsl.h"
-
-+#ifdef DEBUG
-+#define DBG(X...) printk(X)
-+#else
-+#define DBG(X...)
-+#endif
-+
- /* configure so an HC device and id are always provided */
- /* always called with process context; sleeping is OK */
-
-@@ -75,7 +80,27 @@ static int usb_hcd_fsl_probe(const struc
- dev_name(&pdev->dev));
- return -ENODEV;
- }
--
-+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-+ if (!hcd) {
-+ retval = -ENOMEM;
-+ goto err1;
-+ }
-+#ifdef CONFIG_USB_OTG
-+ if (pdata->operating_mode == FSL_USB2_DR_OTG) {
-+ res = otg_get_resources();
-+ if (!res) {
-+ dev_err(&pdev->dev,
-+ "Found HC with no IRQ. Check %s setup!\n",
-+ dev_name(&pdev->dev));
-+ return -ENODEV;
-+ goto err2;
-+ }
-+ irq = res[1].start;
-+ hcd->rsrc_start = res[0].start;
-+ hcd->rsrc_len = res[0].end - res[0].start + 1;
-+ } else
-+#endif
-+ {
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(&pdev->dev,
-@@ -85,12 +110,6 @@ static int usb_hcd_fsl_probe(const struc
- }
- irq = res->start;
-
-- hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-- if (!hcd) {
-- retval = -ENOMEM;
-- goto err1;
-- }
--
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev,
-@@ -101,12 +120,15 @@ static int usb_hcd_fsl_probe(const struc
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = res->end - res->start + 1;
-+#ifndef CONFIG_USB_OTG
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
- driver->description)) {
- dev_dbg(&pdev->dev, "controller already in use\n");
- retval = -EBUSY;
- goto err2;
- }
-+#endif
-+ }
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-
- if (hcd->regs == NULL) {
-@@ -124,22 +146,56 @@ static int usb_hcd_fsl_probe(const struc
- retval = -ENODEV;
- goto err3;
- }
--
-+#ifndef CONFIG_COLDFIRE
- /* Enable USB controller, 83xx or 8536 */
- if (pdata->have_sysif_regs)
- setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
--
-+#endif
- /* Don't need to set host mode here. It will be done by tdi_reset() */
--
-+#ifdef CONFIG_COLDFIRE
-+ fsl_platform_set_host_mode(hcd);
-+ hcd->power_budget = pdata->power_budget;
-+#endif
- retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
- if (retval != 0)
- goto err4;
-+#ifdef CONFIG_COLDFIRE
-+ fsl_platform_set_vbus_power(pdata, 1);
-+#endif
-+#ifdef CONFIG_USB_OTG
-+ if (pdata->operating_mode == FSL_USB2_DR_OTG) {
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+
-+ DBG("pdev=0x%p hcd=0x%p ehci=0x%p\n", pdev, hcd, ehci);
-+
-+ ehci->transceiver = otg_get_transceiver();
-+ DBG("ehci->transceiver=0x%p\n", ehci->transceiver);
-+
-+ if (ehci->transceiver) {
-+ retval = otg_set_host(ehci->transceiver,
-+ &ehci_to_hcd(ehci)->self);
-+ if (retval) {
-+ printk(KERN_INFO "otg transceiver set host failed\n");
-+ if (ehci->transceiver)
-+ put_device(ehci->transceiver->dev);
-+ goto err4;
-+ }
-+ } else {
-+ printk(KERN_ERR "can't find transceiver\n");
-+ retval = -ENODEV;
-+ goto err4;
-+ }
-+ }
-+#endif
-+
- return retval;
-
- err4:
- iounmap(hcd->regs);
- err3:
-+#ifndef CONFIG_USB_OTG
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+#endif
- err2:
- usb_put_hcd(hcd);
- err1:
-@@ -164,9 +220,24 @@ static void usb_hcd_fsl_remove(struct us
- struct platform_device *pdev)
- {
- struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+#ifdef CONFIG_COLDFIRE
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
-+ /* DDD shouldn't we turn off the power here? */
-+ fsl_platform_set_vbus_power(pdata, 0);
-+
-+ if (ehci->transceiver) {
-+ (void)otg_set_host(ehci->transceiver, 0);
-+ put_device(ehci->transceiver->dev);
-+ } else {
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ }
-+
-+
-+#endif
- usb_remove_hcd(hcd);
-
-+ usb_put_hcd(hcd);
- /*
- * do platform specific un-initialization:
- * release iomux pins, disable clock, etc.
-@@ -174,8 +245,6 @@ static void usb_hcd_fsl_remove(struct us
- if (pdata->exit)
- pdata->exit(pdev);
- iounmap(hcd->regs);
-- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-- usb_put_hcd(hcd);
- }
-
- static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
-@@ -238,7 +307,7 @@ static void ehci_fsl_usb_setup(struct eh
- if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
- (pdata->operating_mode == FSL_USB2_DR_OTG))
- ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
--
-+#ifndef CONFIG_COLDFIRE
- if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
- unsigned int chip, rev, svr;
-
-@@ -255,7 +324,7 @@ static void ehci_fsl_usb_setup(struct eh
- if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
- ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1);
- }
--
-+#endif
- if (pdata->have_sysif_regs) {
- #ifdef CONFIG_PPC_85xx
- out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
-@@ -271,7 +340,11 @@ static void ehci_fsl_usb_setup(struct eh
- /* called after powerup, by probe or system-pm "wakeup" */
- static int ehci_fsl_reinit(struct ehci_hcd *ehci)
- {
-+#ifdef CONFIG_COLDFIRE
-+ fsl_platform_usb_setup(ehci);
-+#else
- ehci_fsl_usb_setup(ehci);
-+#endif
- ehci_port_power(ehci, 0);
-
- return 0;
-@@ -334,7 +407,6 @@ static struct ehci_fsl *hcd_to_ehci_fsl(
-
- return container_of(ehci, struct ehci_fsl, ehci);
- }
--
- static int ehci_fsl_drv_suspend(struct device *dev)
- {
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-@@ -371,7 +443,6 @@ static int ehci_fsl_drv_resume(struct de
-
- return 0;
- }
--
- static int ehci_fsl_drv_restore(struct device *dev)
- {
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-@@ -387,6 +458,144 @@ static struct dev_pm_ops ehci_fsl_pm_ops
- };
-
- #define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
-+
-+/* suspend/resume, section 4.3 */
-+
-+/* These routines rely on the bus (pci, platform, etc)
-+ * to handle powerdown and wakeup, and currently also on
-+ * transceivers that don't need any software attention to set up
-+ * the right sort of wakeup.
-+ *
-+ * They're also used for turning on/off the port when doing OTG.
-+ */
-+static int ehci_fsl_suspend(struct device *dev,
-+ pm_message_t message)
-+{
-+ struct usb_hcd *hcd = dev_get_drvdata(dev);
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ u32 tmp;
-+ struct fsl_usb2_platform_data *pdata = dev->platform_data;
-+
-+#ifdef DEBUG
-+ u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
-+ mode &= USBMODE_CM_MASK;
-+ tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
-+
-+ DBG(KERN_DEBUG "%s('%s'): suspend=%d already_suspended=%d "
-+ "mode=%d usbcmd %08x\n", __func__, pdata->name,
-+ pdata->suspended, pdata->already_suspended, mode, tmp);
-+#endif
-+ /*
-+ * If the controller is already suspended, then this must be a
-+ * PM suspend. Remember this fact, so that we will leave the
-+ * controller suspended at PM resume time.
-+ */
-+ if (pdata->suspended) {
-+ pr_debug("%s: already suspended, leaving early\n", __func__);
-+ pdata->already_suspended = 1;
-+ return 0;
-+ }
-+
-+ pr_debug("%s: suspending...\n", __func__);
-+
-+ DBG(KERN_INFO "USB Host suspended\n");
-+
-+ hcd->state = HC_STATE_SUSPENDED;
-+ dev->power.power_state = PMSG_SUSPEND;
-+
-+ /* ignore non-host interrupts */
-+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+
-+ /* stop the controller */
-+ tmp = ehci_readl(ehci, &ehci->regs->command);
-+ tmp &= ~CMD_RUN;
-+ ehci_writel(ehci, tmp, &ehci->regs->command);
-+
-+ /* save EHCI registers */
-+ pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
-+ pdata->pm_command &= ~CMD_RUN;
-+ pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
-+ pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
-+ pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
-+ pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
-+ pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
-+ pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
-+ pdata->pm_configured_flag =
-+ ehci_readl(ehci, &ehci->regs->configured_flag);
-+ pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+
-+ /* clear the W1C bits */
-+ pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
-+
-+ pdata->suspended = 1;
-+#if 0
-+ /* clear PP to cut power to the port */
-+ tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+ tmp &= ~PORT_POWER;
-+ ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
-+#endif
-+ return 0;
-+}
-+
-+static int ehci_fsl_resume(struct device *dev)
-+{
-+ struct usb_hcd *hcd = dev_get_drvdata(dev);
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ u32 tmp;
-+ struct fsl_usb2_platform_data *pdata = dev->platform_data;
-+
-+ pr_debug("%s('%s'): suspend=%d already_suspended=%d\n", __func__,
-+ pdata->name, pdata->suspended, pdata->already_suspended);
-+
-+ /*
-+ * If the controller was already suspended at suspend time,
-+ * then don't resume it now.
-+ */
-+ if (pdata->already_suspended) {
-+ pr_debug("already suspended, leaving early\n");
-+ pdata->already_suspended = 0;
-+ return 0;
-+ }
-+
-+ if (!pdata->suspended) {
-+ pr_debug("not suspended, leaving early\n");
-+ return 0;
-+ }
-+
-+ DBG(KERN_INFO "USB Host resumed\n");
-+
-+ pdata->suspended = 0;
-+
-+ pr_debug("%s resuming...\n", __func__);
-+
-+ /* set host mode */
-+ fsl_platform_set_host_mode(hcd);
-+
-+
-+ /* restore EHCI registers */
-+ ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
-+ ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
-+ ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
-+ ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
-+ ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
-+ ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
-+ ehci_writel(ehci, pdata->pm_configured_flag,
-+ &ehci->regs->configured_flag);
-+ ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
-+
-+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+ hcd->state = HC_STATE_RUNNING;
-+ dev->power.power_state = PMSG_ON;
-+
-+ tmp = ehci_readl(ehci, &ehci->regs->command);
-+ tmp |= CMD_RUN;
-+ ehci_writel(ehci, tmp, &ehci->regs->command);
-+
-+ usb_hcd_resume_root_hub(hcd);
-+
-+ return 0;
-+}
-+
- #else
- #define EHCI_FSL_PM_OPS NULL
- #endif /* CONFIG_PM */
-@@ -431,7 +640,11 @@ static const struct hc_driver ehci_fsl_h
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
-+#ifndef CONFIG_COLDFIRE
- .port_handed_over = ehci_port_handed_over,
-+#else
-+ .start_port_reset = ehci_start_port_reset,
-+#endif
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
- };
-@@ -460,8 +673,16 @@ static struct platform_driver ehci_fsl_d
- .probe = ehci_fsl_drv_probe,
- .remove = ehci_fsl_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
-+#ifdef CONFIG_PM
-+#ifndef CONFIG_COLDFIRE
-+ .suspend = ehci_fsl_suspend,
-+ .resume = ehci_fsl_resume,
-+#endif
-+#endif
- .driver = {
- .name = "fsl-ehci",
- .pm = EHCI_FSL_PM_OPS,
-+ .suspend = ehci_fsl_suspend,
-+ .resume = ehci_fsl_resume,
- },
- };
---- a/drivers/usb/host/ehci-fsl.h
-+++ b/drivers/usb/host/ehci-fsl.h
-@@ -42,4 +42,11 @@
- #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */
- #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
- #define SNOOP_SIZE_2GB 0x1e
-+
-+#ifdef CONFIG_COLDFIRE
-+#define FSL_SOC_USB_USBMODE 0x1a8
-+
-+#include <asm/fsl_usb_platform.h>
-+#include <asm/fsl_usb_io.h>
-+#endif
- #endif /* _EHCI_FSL_H */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -1,5 +1,6 @@
- /*
- * Copyright (C) 2001-2004 by David Brownell
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
-@@ -41,6 +42,39 @@ static int ehci_hub_control(
- u16 wLength
- );
-
-+#ifdef CONFIG_COLDFIRE
-+
-+#ifdef CONFIG_USB_OTG
-+static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ u32 status;
-+
-+ if (!port)
-+ return -EINVAL;
-+ port--;
-+
-+ /* start port reset before HNP protocol time out */
-+ status = readl(&ehci->regs->port_status[port]);
-+ if (!(status & PORT_CONNECT))
-+ return -ENODEV;
-+
-+ /* khubd will finish the reset later */
-+ if (ehci_is_TDI(ehci))
-+ writel(PORT_RESET | (status & ~(PORT_CSC | PORT_PEC
-+ | PORT_OCC)), &ehci->regs->port_status[port]);
-+ else
-+ writel(PORT_RESET, &ehci->regs->port_status[port]);
-+
-+ return 0;
-+}
-+#else
-+static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
-+{
-+ return 0;
-+}
-+#endif /* CONFIG_USB_OTG */
-+#endif
- /* After a power loss, ports that were owned by the companion must be
- * reset so that the companion can still own them.
- */
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -1,6 +1,7 @@
- /*
- * Copyright (c) 2001-2002 by David Brownell
-- *
-+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
-@@ -147,7 +148,9 @@ struct ehci_hcd { /* one per controlle
- unsigned has_lpm:1; /* support link power management */
- unsigned has_ppcd:1; /* support per-port change bits */
- u8 sbrn; /* packed release number */
--
-+#if defined(CONFIG_COLDFIRE)
-+ struct otg_transceiver *transceiver;
-+#endif
- /* irq statistics */
- #ifdef EHCI_STATS
- struct ehci_stats stats;
-@@ -617,6 +620,54 @@ ehci_port_speed(struct ehci_hcd *ehci, u
- #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
- #endif
-
-+#if defined(CONFIG_COLDFIRE)
-+
-+#if defined(CONFIG_MMU)
-+#include <asm/fsl_usb_io.h>
-+/*
-+ * Sorry, include/asm-m68k/io.h is messed up. It will give you a
-+ * BE readl or a LE readl depending on whether or not CONFIG_PCI is set.
-+ * how broken is that? Do the right thing here.
-+ */
-+#undef readl
-+#undef writel
-+
-+#define readl(addr) in_le32((__force unsigned *)(addr))
-+#define writel(val, addr) out_le32((__force unsigned *)(addr), (val))
-+
-+#define readl_be(addr) in_be32((__force unsigned *)(addr))
-+#define writel_be(val, addr) out_be32((__force unsigned *)(addr), (val))
-+
-+#else /* !CONFIG_MMU */
-+
-+#define readl_be(addr) \
-+ ({u32 __v = (*(__force volatile u32 *)addr); __v; })
-+#define writel_be(val, addr) \
-+ (void)((*(__force volatile u32 *)addr) = val)
-+
-+#ifndef in_be32
-+#define in_be32(addr) \
-+ ({ u32 __v = (*(__force volatile u32 *)(addr)); __v; })
-+#endif
-+
-+#ifndef in_le32
-+#define in_le32(addr) \
-+ ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *)(addr)); __v; })
-+#endif
-+
-+#ifndef out_be32
-+#define out_be32(addr, l) (void)((*(__force volatile u32 *)(addr)) = (l))
-+#endif
-+
-+#ifndef out_le32
-+#define out_le32(addr, l) \
-+ (void)((*(__force volatile __le32 *)(addr)) = cpu_to_le32(l))
-+#endif
-+
-+#endif
-+
-+#endif /* CONFIG_COLDFIRE */
-+
- static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
- __u32 __iomem * regs)
- {
---- a/drivers/usb/otg/Makefile
-+++ b/drivers/usb/otg/Makefile
-@@ -18,3 +18,10 @@ obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-x
- obj-$(CONFIG_USB_ULPI) += ulpi.o
- obj-$(CONFIG_USB_MSM_OTG_72K) += msm72k_otg.o
- obj-$(CONFIG_AB8500_USB) += ab8500-usb.o
-+
-+obj-$(CONFIG_USB_OTG) += usb.o
-+fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o
-+#ifneq ($(CONFIG_USB_OTG),)
-+ifneq ($(CONFIG_USB_OTG),)
-+obj-m += fsl_usb2_otg.o
-+endif
---- /dev/null
-+++ b/drivers/usb/otg/fsl_otg.c
-@@ -0,0 +1,1212 @@
-+/*
-+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Author: Li Yang <LeoLi@freescale.com>
-+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
-+ *
-+ * Initialization based on code from Shlomi Gridish.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/smp_lock.h>
-+#include <linux/proc_fs.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/reboot.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/usb.h>
-+#include <linux/device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb/gadget.h>
-+#include <linux/workqueue.h>
-+#include <linux/time.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/byteorder.h>
-+#include <linux/uaccess.h>
-+#include <asm/unaligned.h>
-+
-+#include "fsl_otg.h"
-+
-+/*
-+#undef DBG
-+#undef VDBG
-+#define DBG(x...) printk(x)
-+#define VDBG(x...) printk(x)
-+*/
-+
-+#define CONFIG_USB_OTG_DEBUG_FILES
-+#define DRIVER_VERSION "$Revision: 1.55 $"
-+#define DRIVER_AUTHOR "Jerry Huang/Li Yang"
-+#define DRIVER_DESC "Freescale USB OTG Driver"
-+#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
-+
-+MODULE_DESCRIPTION("Freescale USB OTG Transceiver Driver");
-+
-+static const char driver_name[] = "fsl-usb2-otg";
-+
-+const pm_message_t otg_suspend_state = {
-+ .event = 1,
-+};
-+
-+#define HA_DATA_PULSE 1
-+
-+volatile static struct usb_dr_mmap *usb_dr_regs;
-+static struct fsl_otg *fsl_otg_dev;
-+static int srp_wait_done;
-+
-+/* FSM timers */
-+struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
-+ *b_ase0_brst_tmr, *b_se0_srp_tmr;
-+
-+/* Driver specific timers */
-+struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
-+ *b_srp_wait_tmr, *a_wait_enum_tmr;
-+
-+static struct list_head active_timers;
-+
-+static struct fsl_otg_config fsl_otg_initdata = {
-+ .otg_port = 1,
-+};
-+
-+/* Routines to access transceiver ULPI registers */
-+u8 view_ulpi(u8 addr)
-+{
-+ u32 temp;
-+
-+ temp = 0x40000000 | (addr << 16);
-+ temp = cpu_to_le32(temp);
-+ fsl_writel(temp, &usb_dr_regs->ulpiview);
-+ udelay(1000);
-+ while (temp & 0x40)
-+ temp = fsl_readl(&usb_dr_regs->ulpiview);
-+ return (le32_to_cpu(temp) & 0x0000ff00) >> 8;
-+}
-+
-+int write_ulpi(u8 addr, u8 data)
-+{
-+ u32 temp;
-+
-+ temp = 0x60000000 | (addr << 16) | data;
-+ temp = cpu_to_hc32(temp);
-+ fsl_writel(temp, &usb_dr_regs->ulpiview);
-+ return 0;
-+}
-+
-+/* -------------------------------------------------------------*/
-+/* Operations that will be called from OTG Finite State Machine */
-+
-+/* Charge vbus for vbus pulsing in SRP */
-+void fsl_otg_chrg_vbus(int on)
-+{
-+ u32 tmp;
-+
-+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
-+
-+ if (on)
-+ /* stop discharging, start charging */
-+ tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) |
-+ OTGSC_CTRL_VBUS_CHARGE;
-+ else
-+ /* stop charging */
-+ tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
-+
-+ fsl_writel(tmp, &usb_dr_regs->otgsc);
-+}
-+
-+/* Discharge vbus through a resistor to ground */
-+void fsl_otg_dischrg_vbus(int on)
-+{
-+ u32 tmp;
-+
-+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
-+
-+ if (on)
-+ /* stop charging, start discharging */
-+ tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) |
-+ OTGSC_CTRL_VBUS_DISCHARGE;
-+ else
-+ /* stop discharging */
-+ tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
-+
-+ fsl_writel(tmp, &usb_dr_regs->otgsc);
-+}
-+
-+/* A-device driver vbus, controlled through PP bit in PORTSC */
-+void fsl_otg_drv_vbus(int on)
-+{
-+/* if (on)
-+ usb_dr_regs->portsc =
-+ cpu_to_le32((le32_to_cpu(usb_dr_regs->portsc) &
-+ ~PORTSC_W1C_BITS) | PORTSC_PORT_POWER);
-+ else
-+ usb_dr_regs->portsc =
-+ cpu_to_le32(le32_to_cpu(usb_dr_regs->portsc) &
-+ ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER);
-+*/
-+}
-+
-+/*
-+ * Pull-up D+, signalling connect by periperal. Also used in
-+ * data-line pulsing in SRP
-+ */
-+void fsl_otg_loc_conn(int on)
-+{
-+ u32 tmp;
-+
-+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
-+
-+ if (on)
-+ tmp |= OTGSC_CTRL_DATA_PULSING;
-+ else
-+ tmp &= ~OTGSC_CTRL_DATA_PULSING;
-+
-+ fsl_writel(tmp, &usb_dr_regs->otgsc);
-+}
-+
-+/* Generate SOF by host. This is controlled through suspend/resume the
-+ * port. In host mode, controller will automatically send SOF.
-+ * Suspend will block the data on the port.
-+ */
-+void fsl_otg_loc_sof(int on)
-+{
-+ u32 tmp;
-+
-+ tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS;
-+ if (on)
-+ tmp |= PORTSC_PORT_FORCE_RESUME;
-+ else
-+ tmp |= PORTSC_PORT_SUSPEND;
-+
-+ fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc);
-+
-+}
-+
-+/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
-+void fsl_otg_start_pulse(void)
-+{
-+ u32 tmp;
-+
-+ srp_wait_done = 0;
-+#ifdef HA_DATA_PULSE
-+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
-+ tmp |= OTGSC_HA_DATA_PULSE;
-+ fsl_writel(tmp, &usb_dr_regs->otgsc);
-+#else
-+ fsl_otg_loc_conn(1);
-+#endif
-+
-+ fsl_otg_add_timer(b_data_pulse_tmr);
-+}
-+
-+void fsl_otg_pulse_vbus(void);
-+
-+void b_data_pulse_end(unsigned long foo)
-+{
-+#ifdef HA_DATA_PULSE
-+#else
-+ fsl_otg_loc_conn(0);
-+#endif
-+
-+ /* Do VBUS pulse after data pulse */
-+ fsl_otg_pulse_vbus();
-+}
-+
-+void fsl_otg_pulse_vbus(void)
-+{
-+ srp_wait_done = 0;
-+ fsl_otg_chrg_vbus(1);
-+ /* start the timer to end vbus charge */
-+ fsl_otg_add_timer(b_vbus_pulse_tmr);
-+}
-+
-+void b_vbus_pulse_end(unsigned long foo)
-+{
-+ fsl_otg_chrg_vbus(0);
-+
-+ /* As USB3300 using the same a_sess_vld and b_sess_vld voltage
-+ * we need to discharge the bus for a while to distinguish
-+ * residual voltage of vbus pulsing and A device pull up */
-+ fsl_otg_dischrg_vbus(1);
-+ fsl_otg_add_timer(b_srp_wait_tmr);
-+}
-+
-+void b_srp_end(unsigned long foo)
-+{
-+ fsl_otg_dischrg_vbus(0);
-+ srp_wait_done = 1;
-+
-+ if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) &&
-+ fsl_otg_dev->fsm.b_sess_vld)
-+ fsl_otg_dev->fsm.b_srp_done = 1;
-+}
-+
-+/* Workaround for a_host suspending too fast. When a_bus_req=0,
-+ * a_host will start by SRP. It needs to set b_hnp_enable before
-+ * actually suspending to start HNP
-+ */
-+void a_wait_enum(unsigned long foo)
-+{
-+ VDBG("a_wait_enum timeout\n");
-+ if (!fsl_otg_dev->otg.host->b_hnp_enable)
-+ fsl_otg_add_timer(a_wait_enum_tmr);
-+ else
-+ otg_statemachine(&fsl_otg_dev->fsm);
-+}
-+
-+/* ------------------------------------------------------*/
-+
-+/* The timeout callback function to set time out bit */
-+void set_tmout(unsigned long indicator)
-+{
-+ *(int *)indicator = 1;
-+}
-+
-+/* Initialize timers */
-+int fsl_otg_init_timers(struct otg_fsm *fsm)
-+{
-+ /* FSM used timers */
-+ a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
-+ (unsigned long)&fsm->a_wait_vrise_tmout);
-+ if (a_wait_vrise_tmr == NULL)
-+ return -ENOMEM;
-+
-+ a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
-+ (unsigned long)&fsm->a_wait_bcon_tmout);
-+ if (a_wait_bcon_tmr == NULL)
-+ return -ENOMEM;
-+
-+ a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
-+ (unsigned long)&fsm->a_aidl_bdis_tmout);
-+ if (a_aidl_bdis_tmr == NULL)
-+ return -ENOMEM;
-+
-+ b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
-+ (unsigned long)&fsm->b_ase0_brst_tmout);
-+ if (b_ase0_brst_tmr == NULL)
-+ return -ENOMEM;
-+
-+ b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
-+ (unsigned long)&fsm->b_se0_srp);
-+ if (b_se0_srp_tmr == NULL)
-+ return -ENOMEM;
-+
-+ b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
-+ (unsigned long)&fsm->b_srp_done);
-+ if (b_srp_fail_tmr == NULL)
-+ return -ENOMEM;
-+
-+ a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
-+ (unsigned long)&fsm);
-+ if (a_wait_enum_tmr == NULL)
-+ return -ENOMEM;
-+
-+ /* device driver used timers */
-+ b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
-+ if (b_srp_wait_tmr == NULL)
-+ return -ENOMEM;
-+
-+ b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
-+ TB_DATA_PLS, 0);
-+ if (b_data_pulse_tmr == NULL)
-+ return -ENOMEM;
-+
-+ b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
-+ TB_VBUS_PLS, 0);
-+ if (b_vbus_pulse_tmr == NULL)
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+/* Uninitialize timers */
-+void fsl_otg_uninit_timers(void)
-+{
-+ /* FSM used timers */
-+ if (a_wait_vrise_tmr != NULL)
-+ kfree(a_wait_vrise_tmr);
-+ if (a_wait_bcon_tmr != NULL)
-+ kfree(a_wait_bcon_tmr);
-+ if (a_aidl_bdis_tmr != NULL)
-+ kfree(a_aidl_bdis_tmr);
-+ if (b_ase0_brst_tmr != NULL)
-+ kfree(b_ase0_brst_tmr);
-+ if (b_se0_srp_tmr != NULL)
-+ kfree(b_se0_srp_tmr);
-+ if (b_srp_fail_tmr != NULL)
-+ kfree(b_srp_fail_tmr);
-+ if (a_wait_enum_tmr != NULL)
-+ kfree(a_wait_enum_tmr);
-+
-+ /* device driver used timers */
-+ if (b_srp_wait_tmr != NULL)
-+ kfree(b_srp_wait_tmr);
-+ if (b_data_pulse_tmr != NULL)
-+ kfree(b_data_pulse_tmr);
-+ if (b_vbus_pulse_tmr != NULL)
-+ kfree(b_vbus_pulse_tmr);
-+}
-+
-+/* Add timer to timer list */
-+void fsl_otg_add_timer(void *gtimer)
-+{
-+ struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer;
-+ struct fsl_otg_timer *tmp_timer;
-+
-+ /* Check if the timer is already in the active list,
-+ * if so update timer count
-+ */
-+ list_for_each_entry(tmp_timer, &active_timers, list)
-+ if (tmp_timer == timer) {
-+ timer->count = timer->expires;
-+ return;
-+ }
-+ timer->count = timer->expires;
-+ list_add_tail(&timer->list, &active_timers);
-+}
-+
-+/* Remove timer from the timer list; clear timeout status */
-+void fsl_otg_del_timer(void *gtimer)
-+{
-+ struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer;
-+ struct fsl_otg_timer *tmp_timer, *del_tmp;
-+
-+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
-+ if (tmp_timer == timer)
-+ list_del(&timer->list);
-+}
-+
-+/* Reduce timer count by 1, and find timeout conditions.
-+ * Called by fsl_otg 1ms timer interrupt
-+ */
-+int fsl_otg_tick_timer(void)
-+{
-+ struct fsl_otg_timer *tmp_timer, *del_tmp;
-+ int expired = 0;
-+
-+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
-+ tmp_timer->count--;
-+ /* check if timer expires */
-+ if (!tmp_timer->count) {
-+ list_del(&tmp_timer->list);
-+ tmp_timer->function(tmp_timer->data);
-+ expired = 1;
-+ }
-+ }
-+
-+ return expired;
-+}
-+
-+/* Reset controller, not reset the bus */
-+void otg_reset_controller(void)
-+{
-+ u32 command;
-+
-+ command = fsl_readl(&usb_dr_regs->usbcmd);
-+ command |= (1 << 1);
-+ fsl_writel(command, &usb_dr_regs->usbcmd);
-+ while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
-+ ;
-+}
-+
-+/* Call suspend/resume routines in host driver */
-+int fsl_otg_start_host(struct otg_fsm *fsm, int on)
-+{
-+ struct otg_transceiver *xceiv = fsm->transceiver;
-+ struct device *dev;
-+ struct fsl_otg *otg_dev = container_of(xceiv, struct fsl_otg, otg);
-+ u32 retval = 0;
-+
-+ if (!xceiv->host)
-+ return -ENODEV;
-+ dev = xceiv->host->controller;
-+
-+ /* Update a_vbus_vld state as a_vbus_vld int is disabled
-+ * in device mode
-+ */
-+ fsm->a_vbus_vld =
-+ !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
-+ if (on) {
-+ /* start fsl usb host controller */
-+ if (otg_dev->host_working)
-+ goto end;
-+ else {
-+ otg_reset_controller();
-+ VDBG("host on......\n");
-+ if (dev->driver->resume) {
-+ retval = dev->driver->resume(dev);
-+ if (fsm->id) {
-+ /* default-b */
-+ fsl_otg_drv_vbus(1);
-+ /* Workaround: b_host can't driver
-+ * vbus, but PP in PORTSC needs to
-+ * be 1 for host to work.
-+ * So we set drv_vbus bit in
-+ * transceiver to 0 thru ULPI. */
-+ write_ulpi(0x0c, 0x20);
-+ }
-+ }
-+
-+ otg_dev->host_working = 1;
-+ }
-+ } else {
-+ /* stop fsl usb host controller */
-+ if (!otg_dev->host_working)
-+ goto end;
-+ else {
-+ VDBG("host off......\n");
-+ if (dev && dev->driver) {
-+ retval = dev->driver->suspend(dev,
-+ otg_suspend_state);
-+ if (fsm->id)
-+ /* default-b */
-+ fsl_otg_drv_vbus(0);
-+ }
-+ otg_dev->host_working = 0;
-+ }
-+ }
-+end:
-+ return retval;
-+}
-+
-+/* Call suspend and resume function in udc driver
-+ * to stop and start udc driver.
-+ */
-+int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
-+{
-+ struct otg_transceiver *xceiv = fsm->transceiver;
-+ struct device *dev;
-+
-+ if (!xceiv->gadget || !xceiv->gadget->dev.parent)
-+ return -ENODEV;
-+
-+ VDBG("gadget %s\n", on ? "on" : "off");
-+ dev = xceiv->gadget->dev.parent;
-+
-+ if (on)
-+ dev->driver->resume(dev);
-+ else
-+ dev->driver->suspend(dev, otg_suspend_state);
-+
-+ return 0;
-+}
-+
-+/* Called by initialization code of host driver. Register host controller
-+ * to the OTG. Suspend host for OTG role detection.
-+ */
-+static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
-+{
-+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+
-+ if (!otg_p || otg_dev != fsl_otg_dev)
-+ return -ENODEV;
-+
-+ DBG("%s\n", __func__);
-+ otg_p->host = host;
-+
-+ otg_dev->fsm.a_bus_drop = 0;
-+ otg_dev->fsm.a_bus_req = 1;
-+
-+ if (host) {
-+ VDBG("host off......\n");
-+
-+ otg_p->host->otg_port = fsl_otg_initdata.otg_port;
-+ otg_p->host->is_b_host = otg_dev->fsm.id;
-+ /* must leave time for khubd to finish its thing
-+ * before yanking the host driver out from under it,
-+ * so suspend the host after a short delay.
-+ */
-+ otg_dev->host_working = 1;
-+ schedule_delayed_work(&otg_dev->otg_event, 100);
-+ return 0;
-+ } else { /* host driver going away */
-+
-+ if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) &
-+ OTGSC_STS_USB_ID)) {
-+ /* Mini-A cable connected */
-+ struct otg_fsm *fsm = &otg_dev->fsm;
-+
-+ otg_p->state = OTG_STATE_UNDEFINED;
-+ fsm->protocol = PROTO_UNDEF;
-+ }
-+ }
-+
-+ otg_dev->host_working = 0;
-+
-+ otg_statemachine(&otg_dev->fsm);
-+
-+ return 0;
-+}
-+
-+/* Called by initialization code of udc. Register udc to OTG.*/
-+static int fsl_otg_set_peripheral(struct otg_transceiver *otg_p,
-+ struct usb_gadget *gadget)
-+{
-+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+
-+ DBG("%s\n", __func__);
-+ VDBG("otg_dev 0x%x\n", (int)otg_dev);
-+ VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
-+
-+ if (!otg_p || otg_dev != fsl_otg_dev)
-+ return -ENODEV;
-+
-+ if (!gadget) {
-+ if (!otg_dev->otg.default_a)
-+ otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0);
-+ usb_gadget_vbus_disconnect(otg_dev->otg.gadget);
-+ otg_dev->otg.gadget = 0;
-+ otg_dev->fsm.b_bus_req = 0;
-+ otg_statemachine(&otg_dev->fsm);
-+ return 0;
-+ }
-+
-+ otg_p->gadget = gadget;
-+ otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id;
-+
-+ otg_dev->fsm.b_bus_req = 1;
-+
-+ /* start the gadget right away if the ID pin says Mini-B */
-+ DBG("ID pin=%d\n", otg_dev->fsm.id);
-+ if (otg_dev->fsm.id == 1) {
-+ fsl_otg_start_host(&otg_dev->fsm, 0);
-+ otg_drv_vbus(&otg_dev->fsm, 0);
-+ fsl_otg_start_gadget(&otg_dev->fsm, 1);
-+ }
-+
-+ return 0;
-+}
-+
-+/* Set OTG port power, only for B-device */
-+static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA)
-+{
-+ if (!fsl_otg_dev)
-+ return -ENODEV;
-+ if (otg_p->state == OTG_STATE_B_PERIPHERAL)
-+ printk(KERN_INFO "FSL OTG:Draw %d mA\n", mA);
-+
-+ return 0;
-+}
-+
-+/* Delayed pin detect interrupt processing.
-+ *
-+ * When the Mini-A cable is disconnected from the board,
-+ * the pin-detect interrupt happens before the disconnnect
-+ * interrupts for the connected device(s). In order to
-+ * process the disconnect interrupt(s) prior to switching
-+ * roles, the pin-detect interrupts are delayed, and handled
-+ * by this routine.
-+ */
-+static void fsl_otg_event(struct work_struct *work)
-+{
-+ struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
-+ struct otg_fsm *fsm = &og->fsm;
-+
-+ if (fsm->id) { /* switch to gadget */
-+ fsl_otg_start_host(fsm, 0);
-+ otg_drv_vbus(fsm, 0);
-+ fsl_otg_start_gadget(fsm, 1);
-+ }
-+}
-+
-+/* B-device start SRP */
-+static int fsl_otg_start_srp(struct otg_transceiver *otg_p)
-+{
-+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+
-+ if (!otg_p || otg_dev != fsl_otg_dev
-+ || otg_p->state != OTG_STATE_B_IDLE)
-+ return -ENODEV;
-+
-+ otg_dev->fsm.b_bus_req = 1;
-+ otg_statemachine(&otg_dev->fsm);
-+
-+ return 0;
-+}
-+
-+/* A_host suspend will call this function to start hnp */
-+static int fsl_otg_start_hnp(struct otg_transceiver *otg_p)
-+{
-+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+
-+ if (!otg_p || otg_dev != fsl_otg_dev)
-+ return -ENODEV;
-+
-+ /* printk("start_hnp.............\n"); */
-+ /* clear a_bus_req to enter a_suspend state */
-+ otg_dev->fsm.a_bus_req = 0;
-+ otg_statemachine(&otg_dev->fsm);
-+
-+ return 0;
-+}
-+
-+/* Interrupt handler. OTG/host/peripheral share the same int line.
-+ * OTG driver clears OTGSC interrupts and leaves USB interrupts
-+ * intact. It needs to have knowledge of some USB interrupts
-+ * such as port change.
-+ */
-+irqreturn_t fsl_otg_isr(int irq, void *dev_id)
-+{
-+ struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
-+ struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg;
-+ u32 otg_int_src, otg_sc;
-+
-+ otg_sc = fsl_readl(&usb_dr_regs->otgsc);
-+ otg_int_src = otg_sc & OTGSC_INTSTS_MASK;
-+
-+ /* Only clear otg interrupts */
-+ fsl_writel(otg_sc, &usb_dr_regs->otgsc);
-+
-+ /*FIXME: ID change not generate when init to 0 */
-+ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
-+ otg->default_a = (fsm->id == 0);
-+
-+ /* process OTG interrupts */
-+ if (otg_int_src) {
-+ if (otg_int_src & OTGSC_INTSTS_USB_ID) {
-+ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
-+ otg->default_a = (fsm->id == 0);
-+ /* clear conn information */
-+ if (fsm->id)
-+ fsm->b_conn = 0;
-+ else
-+ fsm->a_conn = 0;
-+
-+ if (otg->host)
-+ otg->host->is_b_host = fsm->id;
-+ if (otg->gadget)
-+ otg->gadget->is_a_peripheral = !fsm->id;
-+ VDBG("ID int (ID is %d)\n", fsm->id);
-+
-+ if (fsm->id) { /* switch to gadget */
-+ schedule_delayed_work(&((struct fsl_otg *)
-+ dev_id)->otg_event, 100);
-+ } else { /* switch to host */
-+ cancel_delayed_work(&
-+ ((struct fsl_otg *)dev_id)->
-+ otg_event);
-+ fsl_otg_start_gadget(fsm, 0);
-+ otg_drv_vbus(fsm, 1);
-+ fsl_otg_start_host(fsm, 1);
-+ }
-+ return IRQ_HANDLED;
-+ }
-+ }
-+ return IRQ_NONE;
-+}
-+
-+static struct otg_fsm_ops fsl_otg_ops = {
-+ .chrg_vbus = fsl_otg_chrg_vbus,
-+ .drv_vbus = fsl_otg_drv_vbus,
-+ .loc_conn = fsl_otg_loc_conn,
-+ .loc_sof = fsl_otg_loc_sof,
-+ .start_pulse = fsl_otg_start_pulse,
-+
-+ .add_timer = fsl_otg_add_timer,
-+ .del_timer = fsl_otg_del_timer,
-+
-+ .start_host = fsl_otg_start_host,
-+ .start_gadget = fsl_otg_start_gadget,
-+};
-+
-+/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
-+static int fsl_otg_conf(struct platform_device *pdev)
-+{
-+ int status;
-+ struct fsl_otg *fsl_otg_tc;
-+ struct fsl_usb2_platform_data *pdata;
-+
-+ pdata = pdev->dev.platform_data;
-+
-+ if (fsl_otg_dev)
-+ return 0;
-+
-+ /* allocate space to fsl otg device */
-+ fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
-+ if (!fsl_otg_tc)
-+ return -ENODEV;
-+
-+ INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
-+
-+ INIT_LIST_HEAD(&active_timers);
-+ status = fsl_otg_init_timers(&fsl_otg_tc->fsm);
-+ if (status) {
-+ printk(KERN_INFO "Couldn't init OTG timers\n");
-+ fsl_otg_uninit_timers();
-+ kfree(fsl_otg_tc);
-+ return status;
-+ }
-+ spin_lock_init(&fsl_otg_tc->fsm.lock);
-+
-+ /* Set OTG state machine operations */
-+ fsl_otg_tc->fsm.ops = &fsl_otg_ops;
-+
-+ /* initialize the otg structure */
-+ fsl_otg_tc->otg.label = DRIVER_DESC;
-+ fsl_otg_tc->otg.set_host = fsl_otg_set_host;
-+ fsl_otg_tc->otg.set_peripheral = fsl_otg_set_peripheral;
-+ fsl_otg_tc->otg.set_power = fsl_otg_set_power;
-+ fsl_otg_tc->otg.start_hnp = fsl_otg_start_hnp;
-+ fsl_otg_tc->otg.start_srp = fsl_otg_start_srp;
-+
-+ fsl_otg_dev = fsl_otg_tc;
-+
-+ /* Store the otg transceiver */
-+ status = otg_set_transceiver(&fsl_otg_tc->otg);
-+ if (status) {
-+ printk(KERN_WARNING ": unable to register OTG transceiver.\n");
-+ return status;
-+ }
-+
-+ return 0;
-+}
-+
-+/* OTG Initialization*/
-+int usb_otg_start(struct platform_device *pdev)
-+{
-+ struct fsl_otg __iomem *p_otg;
-+ struct otg_transceiver *otg_trans = otg_get_transceiver();
-+ struct otg_fsm *fsm;
-+ volatile unsigned long *p;
-+ int status;
-+ struct resource *res;
-+ u32 temp;
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+ p_otg = container_of(otg_trans, struct fsl_otg, otg);
-+ fsm = &p_otg->fsm;
-+
-+ /* Initialize the state machine structure with default values */
-+ SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
-+ fsm->transceiver = &p_otg->otg;
-+
-+ /* We don't require predefined MEM/IRQ resource index */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENXIO;
-+
-+ /* We don't request_mem_region here to enable resource sharing
-+ * with host/device */
-+
-+ usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap));
-+ p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs;
-+ pdata->regs = (void *)usb_dr_regs;
-+
-+ /* request irq */
-+ p_otg->irq = platform_get_irq(pdev, 0);
-+ status = request_irq(p_otg->irq, fsl_otg_isr,
-+ IRQF_SHARED, driver_name, p_otg);
-+ if (status) {
-+ dev_dbg(p_otg->otg.dev, "can't get IRQ %d, error %d\n",
-+ p_otg->irq, status);
-+ iounmap(p_otg->dr_mem_map);
-+ kfree(p_otg);
-+ return status;
-+ }
-+
-+ if (pdata->init && pdata->init(pdev) != 0)
-+ return -EINVAL;
-+
-+
-+ /* Export DR controller resources */
-+ otg_set_resources(pdev->resource);
-+
-+ /* stop the controller */
-+ temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
-+ temp &= ~USB_CMD_RUN_STOP;
-+ fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
-+
-+ /* reset the controller */
-+ temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
-+ temp |= USB_CMD_CTRL_RESET;
-+ fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
-+
-+ /* wait reset completed */
-+ udelay(2);
-+ while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET)
-+ ;
-+
-+ /* configure the VBUSHS as IDLE(both host and device) */
-+ temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0);
-+ fsl_writel(temp, &p_otg->dr_mem_map->usbmode);
-+
-+ /* configure PHY interface */
-+ temp = fsl_readl(&p_otg->dr_mem_map->portsc);
-+ temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
-+ switch (pdata->phy_mode) {
-+ case FSL_USB2_PHY_ULPI:
-+ temp |= PORTSC_PTS_ULPI;
-+ break;
-+ case FSL_USB2_PHY_UTMI_WIDE:
-+ temp |= PORTSC_PTW_16BIT;
-+ /* fall through */
-+ case FSL_USB2_PHY_UTMI:
-+ temp |= PORTSC_PTS_UTMI;
-+ /* fall through */
-+ default:
-+ break;
-+ }
-+ fsl_writel(temp, &p_otg->dr_mem_map->portsc);
-+
-+ if (pdata->have_sysif_regs) {
-+ /* configure control enable IO output, big endian register */
-+ p = (volatile unsigned long *)(&p_otg->dr_mem_map->control);
-+ temp = *p;
-+ temp |= USB_CTRL_IOENB;
-+ *p = temp;
-+ }
-+
-+ /* disable all interrupt and clear all OTGSC status */
-+ temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
-+ temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
-+ temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
-+ fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
-+
-+
-+ /*
-+ * The identification (id) input is FALSE when a Mini-A plug is inserted
-+ * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
-+ * Also: record initial state of ID pin
-+ */
-+ if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
-+ p_otg->otg.state = OTG_STATE_UNDEFINED;
-+ p_otg->fsm.id = 1;
-+ } else {
-+ p_otg->otg.state = OTG_STATE_A_IDLE;
-+ p_otg->fsm.id = 0;
-+ }
-+
-+ DBG("initial ID pin=%d\n", p_otg->fsm.id);
-+
-+ /* enable OTG ID pin interrupt */
-+ temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
-+ temp |= OTGSC_INTR_USB_ID_EN;
-+ temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN);
-+ fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
-+
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------
-+ PROC File System Support
-+-------------------------------------------------------------------------*/
-+#ifdef CONFIG_USB_OTG_DEBUG_FILES
-+
-+#include <linux/seq_file.h>
-+
-+static const char proc_filename[] = "driver/fsl_usb2_otg";
-+
-+static int otg_proc_read(char *page, char **start, off_t off, int count,
-+ int *eof, void *_dev)
-+{
-+ struct otg_fsm *fsm = &fsl_otg_dev->fsm;
-+ char *buf = page;
-+ char *next = buf;
-+ unsigned size = count;
-+ unsigned long flags;
-+ int t;
-+ u32 tmp_reg;
-+
-+ if (off != 0)
-+ return 0;
-+
-+ spin_lock_irqsave(&fsm->lock, flags);
-+
-+ /* ------basic driver infomation ---- */
-+ t = scnprintf(next, size,
-+ DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
-+ DRIVER_VERSION);
-+ size -= t;
-+ next += t;
-+
-+ /* ------ Registers ----- */
-+ tmp_reg = fsl_readl(&usb_dr_regs->otgsc);
-+ t = scnprintf(next, size, "OTGSC reg: %08x\n", tmp_reg);
-+ size -= t;
-+ next += t;
-+
-+ tmp_reg = fsl_readl(&usb_dr_regs->portsc);
-+ t = scnprintf(next, size, "PORTSC reg: %08x\n", tmp_reg);
-+ size -= t;
-+ next += t;
-+
-+ tmp_reg = fsl_readl(&usb_dr_regs->usbmode);
-+ t = scnprintf(next, size, "USBMODE reg: %08x\n", tmp_reg);
-+ size -= t;
-+ next += t;
-+
-+ tmp_reg = fsl_readl(&usb_dr_regs->usbcmd);
-+ t = scnprintf(next, size, "USBCMD reg: %08x\n", tmp_reg);
-+ size -= t;
-+ next += t;
-+
-+ tmp_reg = fsl_readl(&usb_dr_regs->usbsts);
-+ t = scnprintf(next, size, "USBSTS reg: %08x\n", tmp_reg);
-+ size -= t;
-+ next += t;
-+
-+ tmp_reg = fsl_readl(&usb_dr_regs->usbintr);
-+ t = scnprintf(next, size, "USBINTR reg: %08x\n", tmp_reg);
-+ size -= t;
-+ next += t;
-+
-+ /* ------ State ----- */
-+ t = scnprintf(next, size,
-+ "OTG state: %s\n\n",
-+ state_string(fsl_otg_dev->otg.state));
-+ size -= t;
-+ next += t;
-+
-+ /* ------ State Machine Variables ----- */
-+ t = scnprintf(next, size, "a_bus_req: %d\n", fsm->a_bus_req);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "b_bus_req: %d\n", fsm->b_bus_req);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "a_bus_resume: %d\n", fsm->a_bus_resume);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "a_bus_suspend: %d\n", fsm->a_bus_suspend);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "a_conn: %d\n", fsm->a_conn);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "a_sess_vld: %d\n", fsm->a_sess_vld);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "a_srp_det: %d\n", fsm->a_srp_det);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "a_vbus_vld: %d\n", fsm->a_vbus_vld);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "b_bus_resume: %d\n", fsm->b_bus_resume);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "b_bus_suspend: %d\n", fsm->b_bus_suspend);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "b_conn: %d\n", fsm->b_conn);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "b_se0_srp: %d\n", fsm->b_se0_srp);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "b_sess_end: %d\n", fsm->b_sess_end);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "b_sess_vld: %d\n", fsm->b_sess_vld);
-+ size -= t;
-+ next += t;
-+
-+ t = scnprintf(next, size, "id: %d\n", fsm->id);
-+ size -= t;
-+ next += t;
-+
-+ spin_unlock_irqrestore(&fsm->lock, flags);
-+
-+ *eof = 1;
-+ return count - size;
-+}
-+
-+#define create_proc_file() create_proc_read_entry(proc_filename, \
-+ 0, NULL, otg_proc_read, NULL)
-+
-+#define remove_proc_file() remove_proc_entry(proc_filename, NULL)
-+
-+#else /* !CONFIG_USB_OTG_DEBUG_FILES */
-+
-+#define create_proc_file() do {} while (0)
-+#define remove_proc_file() do {} while (0)
-+
-+#endif /*CONFIG_USB_OTG_DEBUG_FILES */
-+
-+/*----------------------------------------------------------*/
-+/* Char driver interface to control some OTG input */
-+
-+/* This function handle some ioctl command,such as get otg
-+ * status and set host suspend
-+ */
-+static long fsl_otg_ioctl(struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ u32 retval = 0;
-+
-+ switch (cmd) {
-+ case GET_OTG_STATUS:
-+ retval = fsl_otg_dev->host_working;
-+ break;
-+
-+ case SET_A_SUSPEND_REQ:
-+ fsl_otg_dev->fsm.a_suspend_req = arg;
-+ break;
-+
-+ case SET_A_BUS_DROP:
-+ fsl_otg_dev->fsm.a_bus_drop = arg;
-+ break;
-+
-+ case SET_A_BUS_REQ:
-+ fsl_otg_dev->fsm.a_bus_req = arg;
-+ break;
-+
-+ case SET_B_BUS_REQ:
-+ fsl_otg_dev->fsm.b_bus_req = arg;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ otg_statemachine(&fsl_otg_dev->fsm);
-+
-+ return retval;
-+}
-+
-+static int fsl_otg_open(struct inode *inode, struct file *file)
-+{
-+
-+ return 0;
-+}
-+
-+static int fsl_otg_release(struct inode *inode, struct file *file)
-+{
-+
-+ return 0;
-+}
-+
-+static struct file_operations otg_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = NULL,
-+ .read = NULL,
-+ .write = NULL,
-+ .unlocked_ioctl = fsl_otg_ioctl,
-+ .open = fsl_otg_open,
-+ .release = fsl_otg_release,
-+};
-+
-+static int __init fsl_otg_probe(struct platform_device *pdev)
-+{
-+ int status;
-+ struct fsl_usb2_platform_data *pdata;
-+
-+ DBG("pdev=0x%p\n", pdev);
-+
-+ if (!pdev)
-+ return -ENODEV;
-+
-+ if (!pdev->dev.platform_data)
-+ return -ENOMEM;
-+
-+ pdata = pdev->dev.platform_data;
-+ fsl_set_usb_accessors(pdata);
-+
-+ /* configure the OTG */
-+ status = fsl_otg_conf(pdev);
-+ if (status) {
-+ printk(KERN_INFO "Couldn't init OTG module\n");
-+ return -status;
-+ }
-+
-+ /* start OTG */
-+ status = usb_otg_start(pdev);
-+
-+ if (register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops)) {
-+ printk(KERN_WARNING FSL_OTG_NAME
-+ ": unable to register FSL OTG device\n");
-+ return -EIO;
-+ }
-+
-+ create_proc_file();
-+ return status;
-+}
-+
-+static int __exit fsl_otg_remove(struct platform_device *pdev)
-+{
-+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+ otg_set_transceiver(NULL);
-+ free_irq(fsl_otg_dev->irq, fsl_otg_dev);
-+
-+ iounmap((void *)usb_dr_regs);
-+
-+ kfree(fsl_otg_dev);
-+
-+ remove_proc_file();
-+
-+ unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
-+
-+ if (pdata->exit)
-+ pdata->exit(pdev);
-+
-+ return 0;
-+}
-+
-+struct platform_driver fsl_otg_driver = {
-+ .probe = fsl_otg_probe,
-+ .remove = __exit_p(fsl_otg_remove),
-+ .driver = {
-+ .name = driver_name,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int __init fsl_usb_otg_init(void)
-+{
-+ printk(KERN_INFO DRIVER_DESC " loaded, %s\n", DRIVER_VERSION);
-+ return platform_driver_register(&fsl_otg_driver);
-+}
-+
-+static void __exit fsl_usb_otg_exit(void)
-+{
-+ platform_driver_unregister(&fsl_otg_driver);
-+ printk(KERN_INFO DRIVER_DESC " unloaded\n");
-+}
-+
-+module_init(fsl_usb_otg_init);
-+module_exit(fsl_usb_otg_exit);
-+
-+MODULE_DESCRIPTION(DRIVER_INFO);
-+MODULE_AUTHOR(DRIVER_AUTHOR);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/usb/otg/fsl_otg.h
-@@ -0,0 +1,423 @@
-+/* Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include "otg_fsm.h"
-+#include <linux/usb/otg.h>
-+#include <linux/ioctl.h>
-+
-+#ifdef CONFIG_PPC32
-+#include <asm/fsl_usb_io.h>
-+#elif CONFIG_COLDFIRE
-+#include <asm/mcfsim.h>
-+#include <asm/fsl_usb_io.h>
-+#endif
-+
-+#define hc32_to_cpu(x) (x)
-+#define cpu_to_hc32(x) (x)
-+
-+ /* USB Command Register Bit Masks */
-+#define USB_CMD_RUN_STOP (0x1<<0)
-+#define USB_CMD_CTRL_RESET (0x1<<1)
-+#define USB_CMD_PERIODIC_SCHEDULE_EN (0x1<<4)
-+#define USB_CMD_ASYNC_SCHEDULE_EN (0x1<<5)
-+#define USB_CMD_INT_AA_DOORBELL (0x1<<6)
-+#define USB_CMD_ASP (0x3<<8)
-+#define USB_CMD_ASYNC_SCH_PARK_EN (0x1<<11)
-+#define USB_CMD_SUTW (0x1<<13)
-+#define USB_CMD_ATDTW (0x1<<14)
-+#define USB_CMD_ITC (0xFF<<16)
-+
-+/* bit 15,3,2 are frame list size */
-+#define USB_CMD_FRAME_SIZE_1024 (0x0<<15 | 0x0<<2)
-+#define USB_CMD_FRAME_SIZE_512 (0x0<<15 | 0x1<<2)
-+#define USB_CMD_FRAME_SIZE_256 (0x0<<15 | 0x2<<2)
-+#define USB_CMD_FRAME_SIZE_128 (0x0<<15 | 0x3<<2)
-+#define USB_CMD_FRAME_SIZE_64 (0x1<<15 | 0x0<<2)
-+#define USB_CMD_FRAME_SIZE_32 (0x1<<15 | 0x1<<2)
-+#define USB_CMD_FRAME_SIZE_16 (0x1<<15 | 0x2<<2)
-+#define USB_CMD_FRAME_SIZE_8 (0x1<<15 | 0x3<<2)
-+
-+/* bit 9-8 are async schedule park mode count */
-+#define USB_CMD_ASP_00 (0x0<<8)
-+#define USB_CMD_ASP_01 (0x1<<8)
-+#define USB_CMD_ASP_10 (0x2<<8)
-+#define USB_CMD_ASP_11 (0x3<<8)
-+#define USB_CMD_ASP_BIT_POS (8)
-+
-+/* bit 23-16 are interrupt threshold control */
-+#define USB_CMD_ITC_NO_THRESHOLD (0x00<<16)
-+#define USB_CMD_ITC_1_MICRO_FRM (0x01<<16)
-+#define USB_CMD_ITC_2_MICRO_FRM (0x02<<16)
-+#define USB_CMD_ITC_4_MICRO_FRM (0x04<<16)
-+#define USB_CMD_ITC_8_MICRO_FRM (0x08<<16)
-+#define USB_CMD_ITC_16_MICRO_FRM (0x10<<16)
-+#define USB_CMD_ITC_32_MICRO_FRM (0x20<<16)
-+#define USB_CMD_ITC_64_MICRO_FRM (0x40<<16)
-+#define USB_CMD_ITC_BIT_POS (16)
-+
-+/* USB Status Register Bit Masks */
-+#define USB_STS_INT (0x1<<0)
-+#define USB_STS_ERR (0x1<<1)
-+#define USB_STS_PORT_CHANGE (0x1<<2)
-+#define USB_STS_FRM_LST_ROLL (0x1<<3)
-+#define USB_STS_SYS_ERR (0x1<<4)
-+#define USB_STS_IAA (0x1<<5)
-+#define USB_STS_RESET_RECEIVED (0x1<<6)
-+#define USB_STS_SOF (0x1<<7)
-+#define USB_STS_DCSUSPEND (0x1<<8)
-+#define USB_STS_HC_HALTED (0x1<<12)
-+#define USB_STS_RCL (0x1<<13)
-+#define USB_STS_PERIODIC_SCHEDULE (0x1<<14)
-+#define USB_STS_ASYNC_SCHEDULE (0x1<<15)
-+
-+/* USB Interrupt Enable Register Bit Masks */
-+#define USB_INTR_INT_EN (0x1<<0)
-+#define USB_INTR_ERR_INT_EN (0x1<<1)
-+#define USB_INTR_PC_DETECT_EN (0x1<<2)
-+#define USB_INTR_FRM_LST_ROLL_EN (0x1<<3)
-+#define USB_INTR_SYS_ERR_EN (0x1<<4)
-+#define USB_INTR_ASYN_ADV_EN (0x1<<5)
-+#define USB_INTR_RESET_EN (0x1<<6)
-+#define USB_INTR_SOF_EN (0x1<<7)
-+#define USB_INTR_DEVICE_SUSPEND (0x1<<8)
-+
-+/* Device Address bit masks */
-+#define USB_DEVICE_ADDRESS_MASK (0x7F<<25)
-+#define USB_DEVICE_ADDRESS_BIT_POS (25)
-+/* PORTSC Register Bit Masks,Only one PORT in OTG mode*/
-+#define PORTSC_CURRENT_CONNECT_STATUS (0x1<<0)
-+#define PORTSC_CONNECT_STATUS_CHANGE (0x1<<1)
-+#define PORTSC_PORT_ENABLE (0x1<<2)
-+#define PORTSC_PORT_EN_DIS_CHANGE (0x1<<3)
-+#define PORTSC_OVER_CURRENT_ACT (0x1<<4)
-+#define PORTSC_OVER_CUURENT_CHG (0x1<<5)
-+#define PORTSC_PORT_FORCE_RESUME (0x1<<6)
-+#define PORTSC_PORT_SUSPEND (0x1<<7)
-+#define PORTSC_PORT_RESET (0x1<<8)
-+#define PORTSC_LINE_STATUS_BITS (0x3<<10)
-+#define PORTSC_PORT_POWER (0x1<<12)
-+#define PORTSC_PORT_INDICTOR_CTRL (0x3<<14)
-+#define PORTSC_PORT_TEST_CTRL (0xF<<16)
-+#define PORTSC_WAKE_ON_CONNECT_EN (0x1<<20)
-+#define PORTSC_WAKE_ON_CONNECT_DIS (0x1<<21)
-+#define PORTSC_WAKE_ON_OVER_CURRENT (0x1<<22)
-+#define PORTSC_PHY_LOW_POWER_SPD (0x1<<23)
-+#define PORTSC_PORT_FORCE_FULL_SPEED (0x1<<24)
-+#define PORTSC_PORT_SPEED_MASK (0x3<<26)
-+#define PORTSC_TRANSCEIVER_WIDTH (0x1<<28)
-+#define PORTSC_PHY_TYPE_SEL (0x3<<30)
-+/* bit 11-10 are line status */
-+#define PORTSC_LINE_STATUS_SE0 (0x0<<10)
-+#define PORTSC_LINE_STATUS_JSTATE (0x1<<10)
-+#define PORTSC_LINE_STATUS_KSTATE (0x2<<10)
-+#define PORTSC_LINE_STATUS_UNDEF (0x3<<10)
-+#define PORTSC_LINE_STATUS_BIT_POS (10)
-+
-+/* bit 15-14 are port indicator control */
-+#define PORTSC_PIC_OFF (0x0<<14)
-+#define PORTSC_PIC_AMBER (0x1<<14)
-+#define PORTSC_PIC_GREEN (0x2<<14)
-+#define PORTSC_PIC_UNDEF (0x3<<14)
-+#define PORTSC_PIC_BIT_POS (14)
-+
-+/* bit 19-16 are port test control */
-+#define PORTSC_PTC_DISABLE (0x0<<16)
-+#define PORTSC_PTC_JSTATE (0x1<<16)
-+#define PORTSC_PTC_KSTATE (0x2<<16)
-+#define PORTSC_PTC_SEQNAK (0x3<<16)
-+#define PORTSC_PTC_PACKET (0x4<<16)
-+#define PORTSC_PTC_FORCE_EN (0x5<<16)
-+#define PORTSC_PTC_BIT_POS (16)
-+
-+/* bit 27-26 are port speed */
-+#define PORTSC_PORT_SPEED_FULL (0x0<<26)
-+#define PORTSC_PORT_SPEED_LOW (0x1<<26)
-+#define PORTSC_PORT_SPEED_HIGH (0x2<<26)
-+#define PORTSC_PORT_SPEED_UNDEF (0x3<<26)
-+#define PORTSC_SPEED_BIT_POS (26)
-+
-+/* bit 28 is parallel transceiver width for UTMI interface */
-+#define PORTSC_PTW (0x1<<28)
-+#define PORTSC_PTW_8BIT (0x0<<28)
-+#define PORTSC_PTW_16BIT (0x1<<28)
-+
-+/* bit 31-30 are port transceiver select */
-+#define PORTSC_PTS_UTMI (0x0<<30)
-+#define PORTSC_PTS_ULPI (0x2<<30)
-+#define PORTSC_PTS_FSLS_SERIAL (0x3<<30)
-+#define PORTSC_PTS_BIT_POS (30)
-+
-+#define PORTSC_W1C_BITS \
-+ (PORTSC_CONNECT_STATUS_CHANGE | \
-+ PORTSC_PORT_EN_DIS_CHANGE | \
-+ PORTSC_OVER_CUURENT_CHG)
-+
-+/* OTG Status Control Register Bit Masks */
-+#define OTGSC_CTRL_VBUS_DISCHARGE (0x1<<0)
-+#define OTGSC_CTRL_VBUS_CHARGE (0x1<<1)
-+#define OTGSC_CTRL_OTG_TERMINATION (0x1<<3)
-+#define OTGSC_CTRL_DATA_PULSING (0x1<<4)
-+#define OTGSC_CTRL_ID_PULL_EN (0x1<<5)
-+#define OTGSC_HA_DATA_PULSE (0x1<<6)
-+#define OTGSC_HA_BA (0x1<<7)
-+#define OTGSC_STS_USB_ID (0x1<<8)
-+#define OTGSC_STS_A_VBUS_VALID (0x1<<9)
-+#define OTGSC_STS_A_SESSION_VALID (0x1<<10)
-+#define OTGSC_STS_B_SESSION_VALID (0x1<<11)
-+#define OTGSC_STS_B_SESSION_END (0x1<<12)
-+#define OTGSC_STS_1MS_TOGGLE (0x1<<13)
-+#define OTGSC_STS_DATA_PULSING (0x1<<14)
-+#define OTGSC_INTSTS_USB_ID (0x1<<16)
-+#define OTGSC_INTSTS_A_VBUS_VALID (0x1<<17)
-+#define OTGSC_INTSTS_A_SESSION_VALID (0x1<<18)
-+#define OTGSC_INTSTS_B_SESSION_VALID (0x1<<19)
-+#define OTGSC_INTSTS_B_SESSION_END (0x1<<20)
-+#define OTGSC_INTSTS_1MS (0x1<<21)
-+#define OTGSC_INTSTS_DATA_PULSING (0x1<<22)
-+#define OTGSC_INTR_USB_ID_EN (0x1<<24)
-+#define OTGSC_INTR_A_VBUS_VALID_EN (0x1<<25)
-+#define OTGSC_INTR_A_SESSION_VALID_EN (0x1<<26)
-+#define OTGSC_INTR_B_SESSION_VALID_EN (0x1<<27)
-+#define OTGSC_INTR_B_SESSION_END_EN (0x1<<28)
-+#define OTGSC_INTR_1MS_TIMER_EN (0x1<<29)
-+#define OTGSC_INTR_DATA_PULSING_EN (0x1<<30)
-+#define OTGSC_INTSTS_MASK (0x00ff0000)
-+
-+/* USB MODE Register Bit Masks */
-+#define USB_MODE_CTRL_MODE_IDLE (0x0<<0)
-+#define USB_MODE_CTRL_MODE_DEVICE (0x2<<0)
-+#define USB_MODE_CTRL_MODE_HOST (0x3<<0)
-+#define USB_MODE_CTRL_MODE_RSV (0x1<<0)
-+#define USB_MODE_SETUP_LOCK_OFF (0x1<<3)
-+#define USB_MODE_STREAM_DISABLE (0x1<<4)
-+#define USB_MODE_ES (0x1<<2) /* (big) Endian Select */
-+
-+#define MPC8349_OTG_IRQ (38)
-+#define CFG_IMMR_BASE (0xfe000000)
-+#define MPC83xx_USB_DR_BASE (CFG_IMMR_BASE + 0x23000)
-+
-+/* control Register Bit Masks */
-+#define USB_CTRL_IOENB (0x1<<2)
-+#define USB_CTRL_ULPI_INT0EN (0x1<<0)
-+
-+/* BCSR5 */
-+#define BCSR5_INT_USB (0x02)
-+
-+/* USB module clk cfg */
-+#define SCCR_OFFS (0xA08)
-+#define SCCR_USB_CLK_DISABLE (0x00000000) /* USB clk disable */
-+#define SCCR_USB_MPHCM_11 (0x00c00000)
-+#define SCCR_USB_MPHCM_01 (0x00400000)
-+#define SCCR_USB_MPHCM_10 (0x00800000)
-+#define SCCR_USB_DRCM_11 (0x00300000)
-+#define SCCR_USB_DRCM_01 (0x00100000)
-+#define SCCR_USB_DRCM_10 (0x00200000)
-+
-+#define SICRL_OFFS (0x114)
-+#define SICRL_USB0 (0x40000000)
-+#define SICRL_USB1 (0x20000000)
-+
-+#define SICRH_OFFS (0x118)
-+#define SICRH_USB_UTMI (0x00020000)
-+
-+/* OTG interrupt enable bit masks */
-+#define OTGSC_INTERRUPT_ENABLE_BITS_MASK \
-+ (OTGSC_INTR_USB_ID_EN | \
-+ OTGSC_INTR_1MS_TIMER_EN | \
-+ OTGSC_INTR_A_VBUS_VALID_EN | \
-+ OTGSC_INTR_A_SESSION_VALID_EN | \
-+ OTGSC_INTR_B_SESSION_VALID_EN | \
-+ OTGSC_INTR_B_SESSION_END_EN | \
-+ OTGSC_INTR_DATA_PULSING_EN)
-+
-+/* OTG interrupt status bit masks */
-+#define OTGSC_INTERRUPT_STATUS_BITS_MASK \
-+ (OTGSC_INTSTS_USB_ID | \
-+ OTGSC_INTR_1MS_TIMER_EN | \
-+ OTGSC_INTSTS_A_VBUS_VALID | \
-+ OTGSC_INTSTS_A_SESSION_VALID | \
-+ OTGSC_INTSTS_B_SESSION_VALID | \
-+ OTGSC_INTSTS_B_SESSION_END | \
-+ OTGSC_INTSTS_DATA_PULSING)
-+
-+/*
-+ * A-DEVICE timing constants
-+ */
-+
-+/* Wait for VBUS Rise */
-+#define TA_WAIT_VRISE (100) /* a_wait_vrise 100 ms, section: 6.6.5.1 */
-+
-+/* Wait for B-Connect */
-+#define TA_WAIT_BCON (10000) /* a_wait_bcon > 1 sec, section: 6.6.5.2
-+ * This is only used to get out of
-+ * OTG_STATE_A_WAIT_BCON state if there was
-+ * no connection for these many milliseconds
-+ */
-+
-+/* A-Idle to B-Disconnect */
-+/* It is necessary for this timer to be more than 750 ms because of a bug in OPT
-+ * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated
-+ * in the test description
-+ */
-+#define TA_AIDL_BDIS (5000) /* a_suspend minimum 200 ms, section: 6.6.5.3 */
-+
-+/* B-Idle to A-Disconnect */
-+#define TA_BIDL_ADIS (12) /* 3 to 200 ms */
-+
-+/* B-device timing constants */
-+
-+
-+/* Data-Line Pulse Time*/
-+#define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms, section:5.3.3 */
-+#define TB_DATA_PLS_MIN (5) /* minimum 5 ms */
-+#define TB_DATA_PLS_MAX (10) /* maximum 10 ms */
-+
-+/* SRP Initiate Time */
-+#define TB_SRP_INIT (100) /* b_srp_init,maximum 100 ms, section:5.3.8 */
-+
-+/* SRP Fail Time */
-+#define TB_SRP_FAIL (7000) /* b_srp_init,Fail time 5~30s, section:6.8.2.2*/
-+
-+/* SRP result wait time */
-+#define TB_SRP_WAIT (60)
-+
-+/* VBus time */
-+#define TB_VBUS_PLS (30) /* time to keep vbus pulsing asserted */
-+
-+/* Discharge time */
-+/* This time should be less than 10ms. It varies from system to system. */
-+#define TB_VBUS_DSCHRG (8)
-+
-+/* A-SE0 to B-Reset */
-+#define TB_ASE0_BRST (20) /* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */
-+
-+/* A bus suspend timer before we can switch to b_wait_aconn */
-+#define TB_A_SUSPEND (7)
-+#define TB_BUS_RESUME (12)
-+
-+/* SE0 Time Before SRP */
-+#define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */
-+
-+
-+#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate)
-+
-+struct usb_dr_mmap {
-+ /* Capability register */
-+ u8 res1[256];
-+ u16 caplength; /* Capability Register Length */
-+ u16 hciversion; /* Host Controller Interface Version */
-+ u32 hcsparams; /* Host Controller Structual Parameters */
-+ u32 hccparams; /* Host Controller Capability Parameters */
-+ u8 res2[20];
-+ u32 dciversion; /* Device Controller Interface Version */
-+ u32 dccparams; /* Device Controller Capability Parameters */
-+ u8 res3[24];
-+ /* Operation register */
-+ u32 usbcmd; /* USB Command Register */
-+ u32 usbsts; /* USB Status Register */
-+ u32 usbintr; /* USB Interrupt Enable Register */
-+ u32 frindex; /* Frame Index Register */
-+ u8 res4[4];
-+ u32 deviceaddr; /* Device Address */
-+ u32 endpointlistaddr; /* Endpoint List Address Register */
-+ u8 res5[4];
-+ u32 burstsize; /* Master Interface Data Burst Size Register */
-+ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */
-+ u8 res6[8];
-+ u32 ulpiview; /* ULPI register access */
-+ u8 res7[12];
-+ u32 configflag; /* Configure Flag Register */
-+ u32 portsc; /* Port 1 Status and Control Register */
-+ u8 res8[28];
-+ u32 otgsc; /* On-The-Go Status and Control */
-+ u32 usbmode; /* USB Mode Register */
-+ u32 endptsetupstat; /* Endpoint Setup Status Register */
-+ u32 endpointprime; /* Endpoint Initialization Register */
-+ u32 endptflush; /* Endpoint Flush Register */
-+ u32 endptstatus; /* Endpoint Status Register */
-+ u32 endptcomplete; /* Endpoint Complete Register */
-+ u32 endptctrl[6]; /* Endpoint Control Registers */
-+ u8 res9[552];
-+ u32 snoop1;
-+ u32 snoop2;
-+ u32 age_cnt_thresh; /* Age Count Threshold Register */
-+ u32 pri_ctrl; /* Priority Control Register */
-+ u32 si_ctrl; /* System Interface Control Register */
-+ u8 res10[236];
-+ u32 control; /* General Purpose Control Register */
-+};
-+
-+
-+struct fsl_otg_timer {
-+ unsigned long expires; /* Number of count increase to timeout */
-+ unsigned long count; /* Tick counter */
-+ void (*function)(unsigned long); /* Timeout function */
-+ unsigned long data; /* Data passed to function */
-+ struct list_head list;
-+};
-+
-+static inline struct fsl_otg_timer *otg_timer_initializer
-+(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-+{
-+ struct fsl_otg_timer *timer;
-+ timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL);
-+ if (timer == NULL)
-+ return NULL;
-+ timer->function = function;
-+ timer->expires = expires;
-+ timer->data = data;
-+ return timer;
-+}
-+
-+struct fsl_otg {
-+ struct otg_transceiver otg;
-+ struct otg_fsm fsm;
-+ struct usb_dr_mmap __iomem *dr_mem_map;
-+ struct delayed_work otg_event;
-+
-+ /* used for usb host */
-+ struct work_struct work_wq;
-+ u8 host_working;
-+
-+ int irq;
-+};
-+
-+struct fsl_otg_config {
-+ u8 otg_port;
-+};
-+
-+/*For SRP and HNP handle*/
-+#define FSL_OTG_MAJOR 66
-+#define FSL_OTG_NAME "fsl-usb2-otg"
-+/*Command to OTG driver(ioctl)*/
-+#define OTG_IOCTL_MAGIC FSL_OTG_MAJOR
-+/*if otg work as host,it should return 1,otherwise it return 0*/
-+#define GET_OTG_STATUS _IOR(OTG_IOCTL_MAGIC, 1, int)
-+#define SET_A_SUSPEND_REQ _IOW(OTG_IOCTL_MAGIC, 2, int)
-+#define SET_A_BUS_DROP _IOW(OTG_IOCTL_MAGIC, 3, int)
-+#define SET_A_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 4, int)
-+#define SET_B_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 5, int)
-+#define GET_A_SUSPEND_REQ _IOR(OTG_IOCTL_MAGIC, 6, int)
-+#define GET_A_BUS_DROP _IOR(OTG_IOCTL_MAGIC, 7, int)
-+#define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int)
-+#define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int)
-+
-+extern const char *state_string(enum usb_otg_state state);
-+extern int otg_set_resources(struct resource *resources);
-+/* prototype declaration */
-+extern void fsl_otg_add_timer(void *timer);
-+extern void fsl_otg_del_timer(void *timer);
---- /dev/null
-+++ b/drivers/usb/otg/otg_fsm.c
-@@ -0,0 +1,371 @@
-+/* OTG Finite State Machine from OTG spec
-+ *
-+ * Copyright 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Author: Li Yang <LeoLi@freescale.com>
-+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/usb/otg.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/usb.h>
-+#include <linux/usb/gadget.h>
-+
-+#include <linux/types.h>
-+#include "otg_fsm.h"
-+
-+
-+/* Defined by device specific driver, for different timer implementation */
-+extern void *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
-+ *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, *a_wait_enum_tmr;
-+
-+const char *state_string(enum usb_otg_state state)
-+{
-+ switch (state) {
-+ case OTG_STATE_A_IDLE: return "a_idle";
-+ case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise";
-+ case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon";
-+ case OTG_STATE_A_HOST: return "a_host";
-+ case OTG_STATE_A_SUSPEND: return "a_suspend";
-+ case OTG_STATE_A_PERIPHERAL: return "a_peripheral";
-+ case OTG_STATE_A_WAIT_VFALL: return "a_wait_vfall";
-+ case OTG_STATE_A_VBUS_ERR: return "a_vbus_err";
-+ case OTG_STATE_B_IDLE: return "b_idle";
-+ case OTG_STATE_B_SRP_INIT: return "b_srp_init";
-+ case OTG_STATE_B_PERIPHERAL: return "b_peripheral";
-+ case OTG_STATE_B_WAIT_ACON: return "b_wait_acon";
-+ case OTG_STATE_B_HOST: return "b_host";
-+ default: return "UNDEFINED";
-+ }
-+}
-+
-+/* Change USB protocol when there is a protocol change */
-+static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
-+{
-+ int ret = 0;
-+
-+ if (fsm->protocol != protocol) {
-+ VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
-+ fsm->protocol, protocol);
-+ /* stop old protocol */
-+ if (fsm->protocol == PROTO_HOST)
-+ ret = fsm->ops->start_host(fsm, 0);
-+ else if (fsm->protocol == PROTO_GADGET)
-+ ret = fsm->ops->start_gadget(fsm, 0);
-+ if (ret)
-+ return ret;
-+
-+ /* start new protocol */
-+ if (protocol == PROTO_HOST)
-+ ret = fsm->ops->start_host(fsm, 1);
-+ else if (protocol == PROTO_GADGET)
-+ ret = fsm->ops->start_gadget(fsm, 1);
-+ if (ret)
-+ return ret;
-+
-+ fsm->protocol = protocol;
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static int state_changed;
-+
-+/* Called when leaving a state. Do state clean up jobs here */
-+void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
-+{
-+ switch (old_state) {
-+ case OTG_STATE_B_IDLE:
-+ otg_del_timer(fsm, b_se0_srp_tmr);
-+ fsm->b_se0_srp = 0;
-+ break;
-+ case OTG_STATE_B_SRP_INIT:
-+ fsm->b_srp_done = 0;
-+ break;
-+ case OTG_STATE_B_PERIPHERAL:
-+ break;
-+ case OTG_STATE_B_WAIT_ACON:
-+ otg_del_timer(fsm, b_ase0_brst_tmr);
-+ fsm->b_ase0_brst_tmout = 0;
-+ break;
-+ case OTG_STATE_B_HOST:
-+ break;
-+ case OTG_STATE_A_IDLE:
-+ break;
-+ case OTG_STATE_A_WAIT_VRISE:
-+ otg_del_timer(fsm, a_wait_vrise_tmr);
-+ fsm->a_wait_vrise_tmout = 0;
-+ break;
-+ case OTG_STATE_A_WAIT_BCON:
-+ otg_del_timer(fsm, a_wait_bcon_tmr);
-+ fsm->a_wait_bcon_tmout = 0;
-+ break;
-+ case OTG_STATE_A_HOST:
-+ otg_del_timer(fsm, a_wait_enum_tmr);
-+ break;
-+ case OTG_STATE_A_SUSPEND:
-+ otg_del_timer(fsm, a_aidl_bdis_tmr);
-+ fsm->a_aidl_bdis_tmout = 0;
-+ fsm->a_suspend_req = 0;
-+ break;
-+ case OTG_STATE_A_PERIPHERAL:
-+ break;
-+ case OTG_STATE_A_WAIT_VFALL:
-+ otg_del_timer(fsm, a_wait_vrise_tmr);
-+ break;
-+ case OTG_STATE_A_VBUS_ERR:
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+/* Called when entering a state */
-+int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
-+{
-+ state_changed = 1;
-+ if (fsm->transceiver->state == new_state)
-+ return 0;
-+ VDBG("Set state: %s\n", state_string(new_state));
-+ otg_leave_state(fsm, fsm->transceiver->state);
-+ switch (new_state) {
-+ case OTG_STATE_B_IDLE:
-+ otg_drv_vbus(fsm, 0);
-+ otg_chrg_vbus(fsm, 0);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_UNDEF);
-+ otg_add_timer(fsm, b_se0_srp_tmr);
-+ break;
-+ case OTG_STATE_B_SRP_INIT:
-+ otg_start_pulse(fsm);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_UNDEF);
-+ otg_add_timer(fsm, b_srp_fail_tmr);
-+ break;
-+ case OTG_STATE_B_PERIPHERAL:
-+ otg_chrg_vbus(fsm, 0);
-+ otg_loc_conn(fsm, 1);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_GADGET);
-+ break;
-+ case OTG_STATE_B_WAIT_ACON:
-+ otg_chrg_vbus(fsm, 0);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_HOST);
-+ otg_add_timer(fsm, b_ase0_brst_tmr);
-+ fsm->a_bus_suspend = 0;
-+ break;
-+ case OTG_STATE_B_HOST:
-+ otg_chrg_vbus(fsm, 0);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 1);
-+ otg_set_protocol(fsm, PROTO_HOST);
-+ usb_bus_start_enum(fsm->transceiver->host,
-+ fsm->transceiver->host->otg_port);
-+ break;
-+ case OTG_STATE_A_IDLE:
-+ otg_drv_vbus(fsm, 0);
-+ otg_chrg_vbus(fsm, 0);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_HOST);
-+ break;
-+ case OTG_STATE_A_WAIT_VRISE:
-+ otg_drv_vbus(fsm, 1);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_HOST);
-+ otg_add_timer(fsm, a_wait_vrise_tmr);
-+ break;
-+ case OTG_STATE_A_WAIT_BCON:
-+ otg_drv_vbus(fsm, 1);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_HOST);
-+ otg_add_timer(fsm, a_wait_bcon_tmr);
-+ break;
-+ case OTG_STATE_A_HOST:
-+ otg_drv_vbus(fsm, 1);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 1);
-+ otg_set_protocol(fsm, PROTO_HOST);
-+ /* When HNP is triggered while a_bus_req = 0, a_host will
-+ * suspend too fast to complete a_set_b_hnp_en */
-+ if (!fsm->a_bus_req || fsm->a_suspend_req)
-+ otg_add_timer(fsm, a_wait_enum_tmr);
-+ break;
-+ case OTG_STATE_A_SUSPEND:
-+ otg_drv_vbus(fsm, 1);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_HOST);
-+ otg_add_timer(fsm, a_aidl_bdis_tmr);
-+
-+ break;
-+ case OTG_STATE_A_PERIPHERAL:
-+ otg_loc_conn(fsm, 1);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_GADGET);
-+ otg_drv_vbus(fsm, 1);
-+ break;
-+ case OTG_STATE_A_WAIT_VFALL:
-+ otg_drv_vbus(fsm, 0);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_HOST);
-+ break;
-+ case OTG_STATE_A_VBUS_ERR:
-+ otg_drv_vbus(fsm, 0);
-+ otg_loc_conn(fsm, 0);
-+ otg_loc_sof(fsm, 0);
-+ otg_set_protocol(fsm, PROTO_UNDEF);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ fsm->transceiver->state = new_state;
-+ return 0;
-+}
-+
-+/* State change judgement */
-+int otg_statemachine(struct otg_fsm *fsm)
-+{
-+ enum usb_otg_state state;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&fsm->lock, flags);
-+
-+ state = fsm->transceiver->state;
-+ state_changed = 0;
-+ /* State machine state change judgement */
-+
-+ switch (state) {
-+ case OTG_STATE_UNDEFINED:
-+ VDBG("fsm->id = %d\n", fsm->id);
-+ if (fsm->id)
-+ otg_set_state(fsm, OTG_STATE_B_IDLE);
-+ else
-+ otg_set_state(fsm, OTG_STATE_A_IDLE);
-+ break;
-+ case OTG_STATE_B_IDLE:
-+ if (!fsm->id)
-+ otg_set_state(fsm, OTG_STATE_A_IDLE);
-+ else if (fsm->b_sess_vld && fsm->transceiver->gadget)
-+ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
-+ else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp)
-+ otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
-+ break;
-+ case OTG_STATE_B_SRP_INIT:
-+ if (!fsm->id || fsm->b_srp_done)
-+ otg_set_state(fsm, OTG_STATE_B_IDLE);
-+ break;
-+ case OTG_STATE_B_PERIPHERAL:
-+ if (!fsm->id || !fsm->b_sess_vld)
-+ otg_set_state(fsm, OTG_STATE_B_IDLE);
-+ else if (fsm->b_bus_req && fsm->transceiver->
-+ gadget->b_hnp_enable && fsm->a_bus_suspend)
-+ otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
-+ break;
-+ case OTG_STATE_B_WAIT_ACON:
-+ if (fsm->a_conn)
-+ otg_set_state(fsm, OTG_STATE_B_HOST);
-+ else if (!fsm->id || !fsm->b_sess_vld)
-+ otg_set_state(fsm, OTG_STATE_B_IDLE);
-+ else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
-+ fsm->b_ase0_brst_tmout = 0;
-+ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
-+ }
-+ break;
-+ case OTG_STATE_B_HOST:
-+ if (!fsm->id || !fsm->b_sess_vld)
-+ otg_set_state(fsm, OTG_STATE_B_IDLE);
-+ else if (!fsm->b_bus_req || !fsm->a_conn)
-+ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
-+ break;
-+ case OTG_STATE_A_IDLE:
-+ if (fsm->id)
-+ otg_set_state(fsm, OTG_STATE_B_IDLE);
-+ else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det))
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
-+ break;
-+ case OTG_STATE_A_WAIT_VRISE:
-+ if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld ||
-+ fsm->a_wait_vrise_tmout) {
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
-+ }
-+ break;
-+ case OTG_STATE_A_WAIT_BCON:
-+ if (!fsm->a_vbus_vld)
-+ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
-+ else if (fsm->b_conn)
-+ otg_set_state(fsm, OTG_STATE_A_HOST);
-+ else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout)
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-+ break;
-+ case OTG_STATE_A_HOST:
-+ if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
-+ fsm->transceiver->host->b_hnp_enable)
-+ otg_set_state(fsm, OTG_STATE_A_SUSPEND);
-+ else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
-+ else if (!fsm->a_vbus_vld)
-+ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
-+ break;
-+ case OTG_STATE_A_SUSPEND:
-+ if (!fsm->b_conn && fsm->transceiver->host->b_hnp_enable)
-+ otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
-+ else if (!fsm->b_conn && !fsm->transceiver->host->b_hnp_enable)
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
-+ else if (fsm->a_bus_req || fsm->b_bus_resume)
-+ otg_set_state(fsm, OTG_STATE_A_HOST);
-+ else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-+ else if (!fsm->a_vbus_vld)
-+ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
-+ break;
-+ case OTG_STATE_A_PERIPHERAL:
-+ if (fsm->id || fsm->a_bus_drop)
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-+ else if (fsm->b_bus_suspend)
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
-+ else if (!fsm->a_vbus_vld)
-+ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
-+ break;
-+ case OTG_STATE_A_WAIT_VFALL:
-+ if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld &&
-+ !fsm->b_conn))
-+ otg_set_state(fsm, OTG_STATE_A_IDLE);
-+ break;
-+ case OTG_STATE_A_VBUS_ERR:
-+ if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
-+ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-+ break;
-+ default:
-+ break;
-+ }
-+ spin_unlock_irqrestore(&fsm->lock, flags);
-+
-+ /*VDBG("quit statemachine, changed = %d\n", state_changed); */
-+ return state_changed;
-+}
---- /dev/null
-+++ b/drivers/usb/otg/otg_fsm.h
-@@ -0,0 +1,151 @@
-+/* Copyright 2006-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#if 0
-+#define DEBUG 1
-+#define VERBOSE 1
-+#endif
-+
-+#ifdef DEBUG
-+#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt , \
-+ __func__, ## args)
-+#else
-+#define DBG(fmt, args...) do {} while (0)
-+#endif
-+
-+#ifdef VERBOSE
-+#define VDBG DBG
-+#else
-+#define VDBG(stuff...) do {} while (0)
-+#endif
-+
-+#ifdef VERBOSE
-+#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
-+#else
-+#define MPC_LOC do {} while (0)
-+#endif
-+
-+#define PROTO_UNDEF (0)
-+#define PROTO_HOST (1)
-+#define PROTO_GADGET (2)
-+
-+/* OTG state machine according to the OTG spec */
-+struct otg_fsm {
-+ /* Input */
-+ int a_bus_resume;
-+ int a_bus_suspend;
-+ int a_conn;
-+ int a_sess_vld;
-+ int a_srp_det;
-+ int a_vbus_vld;
-+ int b_bus_resume;
-+ int b_bus_suspend;
-+ int b_conn;
-+ int b_se0_srp;
-+ int b_sess_end;
-+ int b_sess_vld;
-+ int id;
-+
-+ /* Internal variables */
-+ int a_set_b_hnp_en;
-+ int b_srp_done;
-+ int b_hnp_enable;
-+
-+ /* Timeout indicator for timers */
-+ int a_wait_vrise_tmout;
-+ int a_wait_bcon_tmout;
-+ int a_aidl_bdis_tmout;
-+ int b_ase0_brst_tmout;
-+
-+ /* Informative variables */
-+ int a_bus_drop;
-+ int a_bus_req;
-+ int a_clr_err;
-+ int a_suspend_req;
-+ int b_bus_req;
-+
-+ /* Output */
-+ int drv_vbus;
-+ int loc_conn;
-+ int loc_sof;
-+
-+ struct otg_fsm_ops *ops;
-+ struct otg_transceiver *transceiver;
-+
-+ /* Current usb protocol used: 0:undefine; 1:host; 2:client */
-+ int protocol;
-+ spinlock_t lock;
-+};
-+
-+struct otg_fsm_ops {
-+ void (*chrg_vbus)(int on);
-+ void (*drv_vbus)(int on);
-+ void (*loc_conn)(int on);
-+ void (*loc_sof)(int on);
-+ void (*start_pulse)(void);
-+ void (*add_timer)(void *timer);
-+ void (*del_timer)(void *timer);
-+ int (*start_host)(struct otg_fsm *fsm, int on);
-+ int (*start_gadget)(struct otg_fsm *fsm, int on);
-+};
-+
-+
-+static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on)
-+{
-+ fsm->ops->chrg_vbus(on);
-+}
-+
-+static inline void otg_drv_vbus(struct otg_fsm *fsm, int on)
-+{
-+ if (fsm->drv_vbus != on) {
-+ fsm->drv_vbus = on;
-+ fsm->ops->drv_vbus(on);
-+ }
-+}
-+
-+static inline void otg_loc_conn(struct otg_fsm *fsm, int on)
-+{
-+ if (fsm->loc_conn != on) {
-+ fsm->loc_conn = on;
-+ fsm->ops->loc_conn(on);
-+ }
-+}
-+
-+static inline void otg_loc_sof(struct otg_fsm *fsm, int on)
-+{
-+ if (fsm->loc_sof != on) {
-+ fsm->loc_sof = on;
-+ fsm->ops->loc_sof(on);
-+ }
-+}
-+
-+static inline void otg_start_pulse(struct otg_fsm *fsm)
-+{
-+ fsm->ops->start_pulse();
-+}
-+
-+static inline void otg_add_timer(struct otg_fsm *fsm, void *timer)
-+{
-+ fsm->ops->add_timer(timer);
-+}
-+
-+static inline void otg_del_timer(struct otg_fsm *fsm, void *timer)
-+{
-+ fsm->ops->del_timer(timer);
-+}
-+
-+int otg_statemachine(struct otg_fsm *fsm);
---- /dev/null
-+++ b/drivers/usb/otg/usb.c
-@@ -0,0 +1,76 @@
-+/* Copyright 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Author: Li Yang <LeoLi@freescale.com>
-+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/usb/otg.h>
-+
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+
-+
-+static struct otg_transceiver *transceiver;
-+static struct resource *otg_resources;
-+
-+/*
-+ * otg_get_transceiver - find the (single) OTG transceiver driver
-+ *
-+ * Returns the transceiver driver, after getting a refcount to it; or
-+ * null if there is no such transceiver. The caller is responsible for
-+ * releasing that count.
-+ */
-+struct otg_transceiver *otg_get_transceiver(void)
-+{
-+ pr_debug("%s transceiver=0x%p\n", __func__, transceiver);
-+ if (transceiver)
-+ get_device(transceiver->dev);
-+
-+ return transceiver;
-+}
-+EXPORT_SYMBOL(otg_get_transceiver);
-+
-+int otg_set_transceiver(struct otg_transceiver *otg)
-+{
-+ if (transceiver && otg)
-+ return -EBUSY;
-+
-+ transceiver = otg;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(otg_set_transceiver);
-+
-+struct resource *otg_get_resources(void)
-+{
-+ return otg_resources;
-+}
-+EXPORT_SYMBOL(otg_get_resources);
-+
-+int otg_set_resources(struct resource *resources)
-+{
-+ otg_resources = resources;
-+ return 0;
-+}
-+EXPORT_SYMBOL(otg_set_resources);
---- a/include/linux/fsl_devices.h
-+++ b/include/linux/fsl_devices.h
-@@ -72,6 +72,18 @@ struct fsl_usb2_platform_data {
- void (*exit)(struct platform_device *);
- void __iomem *regs; /* ioremap'd register base */
- struct clk *clk;
-+#ifdef CONFIG_COLDFIRE
-+ u32 xcvr_type; /* PORTSC_PTS_* */
-+ char *name; /* pretty print */
-+ char *transceiver; /* transceiver name */
-+ unsigned power_budget; /* for hcd->power_budget */
-+ struct platform_device *pdev;
-+ struct fsl_xcvr_ops *xcvr_ops;
-+
-+ int (*gpio_usb_active) (void);
-+ void (*gpio_usb_inactive) (void);
-+
-+#endif
- unsigned big_endian_mmio:1;
- unsigned big_endian_desc:1;
- unsigned es:1; /* need USBMODE:ES */
-@@ -79,6 +91,20 @@ struct fsl_usb2_platform_data {
- unsigned have_sysif_regs:1;
- unsigned invert_drvvbus:1;
- unsigned invert_pwr_fault:1;
-+#ifdef CONFIG_COLDFIRE
-+ unsigned suspended:1;
-+ unsigned already_suspended:1;
-+#endif
-+ /* register save area for suspend/resume */
-+ u32 pm_command;
-+ u32 pm_status;
-+ u32 pm_intr_enable;
-+ u32 pm_frame_index;
-+ u32 pm_segment;
-+ u32 pm_frame_list;
-+ u32 pm_async_next;
-+ u32 pm_configured_flag;
-+ u32 pm_portsc;
- };
-
- /* Flags in fsl_usb2_mph_platform_data */
---- /dev/null
-+++ b/include/linux/usb/fsl_usb2.h
-@@ -0,0 +1,410 @@
-+/*
-+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * Freescale USB device/endpoint management registers
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef __FSL_USB2_H
-+#define __FSL_USB2_H
-+
-+
-+ /* USB DR device mode registers (Little Endian) */
-+struct fsl_usb_device_regs {
-+ /* Capability register */
-+ u32 id;
-+ u32 res1[63];
-+ u16 caplength; /* Capability Register Length */
-+ u16 hciversion; /* Host Controller Interface Version */
-+ u32 hcsparams; /* Host Controller Structual Parameters */
-+ u32 hccparams; /* Host Controller Capability Parameters */
-+ u32 res2[5];
-+ u32 dciversion; /* Device Controller Interface Version */
-+ u32 dccparams; /* Device Controller Capability Parameters */
-+ u32 res3[6];
-+ /* Operation register */
-+ u32 usbcmd; /* USB Command Register */
-+ u32 usbsts; /* USB Status Register */
-+ u32 usbintr; /* USB Interrupt Enable Register */
-+ u32 frindex; /* Frame Index Register */
-+ u32 res4;
-+ u32 deviceaddr; /* Device Address */
-+ u32 endpointlistaddr; /* Endpoint List Address Register */
-+ u32 res5;
-+ u32 burstsize; /* Master Interface Data Burst Size Register */
-+ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */
-+ u32 res6[2];
-+ u32 ulpiview;
-+ u32 res7[3];
-+ u32 configflag; /* Configure Flag Register */
-+ u32 portsc1; /* Port 1 Status and Control Register */
-+ u32 res8[7];
-+ u32 otgsc; /* On-The-Go Status and Control */
-+ u32 usbmode; /* USB Mode Register */
-+ u32 endptsetupstat; /* Endpoint Setup Status Register */
-+ u32 endpointprime; /* Endpoint Initialization Register */
-+ u32 endptflush; /* Endpoint Flush Register */
-+ u32 endptstatus; /* Endpoint Status Register */
-+ u32 endptcomplete; /* Endpoint Complete Register */
-+ /* DCCPARAMS:DEN has the real number of device endpoints. */
-+ u32 endptctrl[16]; /* Endpoint Control Registers */
-+};
-+
-+ /* USB DR host mode registers (Little Endian) */
-+struct fsl_usb_host_regs {
-+ /* Capability register */
-+ u32 id;
-+ u32 res1[63];
-+ u16 caplength; /* Capability Register Length */
-+ u16 hciversion; /* Host Controller Interface Version */
-+ u32 hcsparams; /* Host Controller Structual Parameters */
-+ u32 hccparams; /* Host Controller Capability Parameters */
-+ u32 res2[5];
-+ u32 dciversion; /* Device Controller Interface Version */
-+ u32 dccparams; /* Device Controller Capability Parameters */
-+ u32 res3[6];
-+ /* Operation register */
-+ u32 usbcmd; /* USB Command Register */
-+ u32 usbsts; /* USB Status Register */
-+ u32 usbintr; /* USB Interrupt Enable Register */
-+ u32 frindex; /* Frame Index Register */
-+ u32 res4;
-+ u32 periodiclistbase; /* Periodic Frame List Base Address Register */
-+ u32 asynclistaddr; /* Current Asynchronous List Address Register */
-+ u32 res5;
-+ u32 burstsize; /* Master Interface Data Burst Size Register */
-+ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */
-+ u32 res6[2];
-+ u32 ulpiview;
-+ u32 res7[3];
-+ u32 configflag; /* Configure Flag Register */
-+ u32 portsc1; /* Port 1 Status and Control Register */
-+ u32 res8[7];
-+ u32 otgsc; /* On-The-Go Status and Control */
-+ u32 usbmode; /* USB Mode Register */
-+ u32 endptsetupstat; /* Endpoint Setup Status Register */
-+ u32 endpointprime; /* Endpoint Initialization Register */
-+ u32 endptflush; /* Endpoint Flush Register */
-+ u32 endptstatus; /* Endpoint Status Register */
-+ u32 endptcomplete; /* Endpoint Complete Register */
-+ /* DCCPARAMS:DEN has the real number of device endpoints. */
-+ u32 endptctrl[16]; /* Endpoint Control Registers */
-+};
-+
-+ /* non-EHCI USB system interface registers (Big Endian) */
-+struct usb_sys_interface {
-+ u32 snoop1;
-+ u32 snoop2;
-+ u32 age_cnt_thresh; /* Age Count Threshold Register */
-+ u32 pri_ctrl; /* Priority Control Register */
-+ u32 si_ctrl; /* System Interface Control Register */
-+ u32 res[59];
-+ u32 control; /* General Purpose Control Register */
-+};
-+
-+/* ep0 transfer state */
-+#define WAIT_FOR_SETUP 0
-+#define DATA_STATE_XMIT 1
-+#define DATA_STATE_NEED_ZLP 2
-+#define WAIT_FOR_OUT_STATUS 3
-+#define DATA_STATE_RECV 4
-+
-+/* Frame Index Register Bit Masks */
-+#define USB_FRINDEX_MASKS 0x3fff
-+
-+
-+
-+/* USBCMD Register Bit Masks */
-+#define USB_CMD_RUN_STOP 0x00000001
-+#define USB_CMD_CTRL_RESET 0x00000002
-+#define USB_CMD_PERIODIC_SCHEDULE_EN 0x00000010
-+#define USB_CMD_ASYNC_SCHEDULE_EN 0x00000020
-+#define USB_CMD_INT_AA_DOORBELL 0x00000040
-+#define USB_CMD_ASP 0x00000300
-+#define USB_CMD_ASYNC_SCH_PARK_EN 0x00000800
-+#define USB_CMD_SUTW 0x00002000
-+#define USB_CMD_ATDTW 0x00004000
-+#define USB_CMD_ITC 0x00FF0000
-+
-+/* bit 15,3,2 are frame list size */
-+#define USB_CMD_FRAME_SIZE_1024 0x00000000
-+#define USB_CMD_FRAME_SIZE_512 0x00000004
-+#define USB_CMD_FRAME_SIZE_256 0x00000008
-+#define USB_CMD_FRAME_SIZE_128 0x0000000C
-+#define USB_CMD_FRAME_SIZE_64 0x00008000
-+#define USB_CMD_FRAME_SIZE_32 0x00008004
-+#define USB_CMD_FRAME_SIZE_16 0x00008008
-+#define USB_CMD_FRAME_SIZE_8 0x0000800C
-+
-+/* bit 9-8 are async schedule park mode count */
-+#define USB_CMD_ASP_00 0x00000000
-+#define USB_CMD_ASP_01 0x00000100
-+#define USB_CMD_ASP_10 0x00000200
-+#define USB_CMD_ASP_11 0x00000300
-+#define USB_CMD_ASP_BIT_POS 8
-+
-+/* bit 23-16 are interrupt threshold control */
-+#define USB_CMD_ITC_NO_THRESHOLD 0x00000000
-+#define USB_CMD_ITC_1_MICRO_FRM 0x00010000
-+#define USB_CMD_ITC_2_MICRO_FRM 0x00020000
-+#define USB_CMD_ITC_4_MICRO_FRM 0x00040000
-+#define USB_CMD_ITC_8_MICRO_FRM 0x00080000
-+#define USB_CMD_ITC_16_MICRO_FRM 0x00100000
-+#define USB_CMD_ITC_32_MICRO_FRM 0x00200000
-+#define USB_CMD_ITC_64_MICRO_FRM 0x00400000
-+#define USB_CMD_ITC_BIT_POS 16
-+
-+
-+
-+
-+/* USB STS Register Bit Masks */
-+#define USB_STS_INT 0x00000001
-+#define USB_STS_ERR 0x00000002
-+#define USB_STS_PORT_CHANGE 0x00000004
-+#define USB_STS_FRM_LST_ROLL 0x00000008
-+#define USB_STS_SYS_ERR 0x00000010
-+#define USB_STS_IAA 0x00000020
-+#define USB_STS_RESET 0x00000040
-+#define USB_STS_SOF 0x00000080
-+#define USB_STS_SUSPEND 0x00000100
-+#define USB_STS_HC_HALTED 0x00001000
-+#define USB_STS_RCL 0x00002000
-+#define USB_STS_PERIODIC_SCHEDULE 0x00004000
-+#define USB_STS_ASYNC_SCHEDULE 0x00008000
-+
-+/* USB INTR Register Bit Masks */
-+#define USB_INTR_INT_EN 0x00000001
-+#define USB_INTR_ERR_INT_EN 0x00000002
-+#define USB_INTR_PTC_DETECT_EN 0x00000004
-+#define USB_INTR_FRM_LST_ROLL_EN 0x00000008
-+#define USB_INTR_SYS_ERR_EN 0x00000010
-+#define USB_INTR_ASYN_ADV_EN 0x00000020
-+#define USB_INTR_RESET_EN 0x00000040
-+#define USB_INTR_SOF_EN 0x00000080
-+#define USB_INTR_DEVICE_SUSPEND 0x00000100
-+
-+/* Device Address bit masks */
-+#define USB_DEVICE_ADDRESS_MASK 0xFE000000
-+#define USB_DEVICE_ADDRESS_BIT_POS 25
-+
-+/* endpoint list address bit masks */
-+#define USB_EP_LIST_ADDRESS_MASK 0xfffff800
-+
-+
-+/* x_PORTSCx */
-+/* bit 31-30 are port transceiver select */
-+#define PORTSCX_PTS_MASK (3 << 30) /* parallel xcvr select mask */
-+#define PORTSCX_PHY_TYPE_SEL PORTSCX_PTS_MASK
-+#define PORTSCX_PTS_UTMI (0 << 30) /* UTMI/UTMI+ */
-+#define PORTSCX_PTS_PHILIPS (1 << 30) /* Philips classic */
-+#define PORTSCX_PTS_ULPI (2 << 30) /* ULPI */
-+#define PORTSCX_PTS_SERIAL (3 << 30) /* serial */
-+#define PORTSCX_PTS_FSLS PORTSCX_PTS_SERIAL
-+#define PORTSCX_PTS_ONCHIP PORTSCX_PTS_FSLS
-+
-+#define PORTSCX_STS (1 << 29) /* serial xcvr select */
-+
-+/* bit 28 is parallel transceiver width for UTMI interface */
-+#define PORTSCX_PTW_8BIT (0 << 28) /* 8 bit parallel xcvr */
-+#define PORTSCX_PTW_16BIT (1 << 28) /* 16 bi parallel xcvr */
-+
-+/* bit 27-26 are port speed */
-+#define PORTSCX_PORT_SPEED_FULL (0 << 26)
-+#define PORTSCX_PORT_SPEED_LOW (1 << 26)
-+#define PORTSCX_PORT_SPEED_HIGH (2 << 26)
-+#define PORTSCX_PORT_SPEED_UNDEF (3 << 26)
-+#define PORTSCX_PORT_SPEED_MASK (3 << 26)
-+
-+/* phy low pwr suspend/clk disable */
-+#define PORTSCX_PHY_LOW_POWER_SPD (1 << 23)
-+
-+/* bit 19-16 are port test control */
-+#define PORTSCX_PTC_DISABLE (0 << 16)
-+#define PORTSCX_PTC_JSTATE (1 << 16)
-+#define PORTSCX_PTC_KSTATE (2 << 16)
-+#define PORTSCX_PTC_SEQNAK (3 << 16) /* SE0 (host)/NAK (device)*/
-+#define PORTSCX_PTC_PACKET (4 << 16)
-+#define PORTSCX_PTC_FORCE_EN_HS (5 << 16)
-+#define PORTSCX_PTC_FORCE_EN_FS (6 << 16)
-+#define PORTSCX_PTC_FORCE_EN_LS (7 << 16)
-+
-+
-+/* bit 15-14 are port indicator control */
-+#define PORTSCX_PIC_OFF (0 << 14)
-+#define PORTSCX_PIC_AMBER (1 << 14)
-+#define PORTSCX_PIC_GREEN (2 << 14)
-+#define PORTSCX_PIC_UNDEF (3 << 14)
-+
-+#define PORTSCX_PORT_POWER (1 << 12) /* port power */
-+
-+/* bit 11-10 are line status */
-+#define PORTSCX_LS_MASK (3 << 10) /* Line State mask */
-+#define PORTSCX_LS_SE0 (0 << 10) /* SE0 */
-+#define PORTSCX_LS_K_STATE (1 << 10) /* K-state */
-+#define PORTSCX_LS_J_STATE (2 << 10) /* J-state */
-+
-+#define PORTSCX_PORT_RESET (1 << 8) /* Port reset */
-+#define PORTSCX_PORT_SUSPEND (1 << 7) /* Suspend */
-+#define PORTSCX_PORT_FORCE_RESUME (1 << 6) /* Force port resume */
-+#define PORTSCX_OVER_CURRENT_CHG (1 << 5) /* over current change */
-+#define PORTSCX_OVER_CURRENT_ACT (1 << 4) /* over currrent active */
-+#define PORTSCX_PORT_EN_DIS_CHANGE (1 << 3) /* port {en,dis}able change*/
-+#define PORTSCX_PORT_ENABLE (1 << 2) /* port enabled */
-+#define PORTSCX_CONNECT_STATUS_CHANGE (1 << 1) /* connect status change */
-+#define PORTSCX_CURRENT_CONNECT_STATUS (1 << 0) /* current connect status */
-+
-+#define PORTSCX_W1C_BITS \
-+ (PORTSCX_CONNECT_STATUS_CHANGE | \
-+ PORTSCX_PORT_EN_DIS_CHANGE | \
-+ PORTSCX_OVER_CURRENT_CHG)
-+
-+
-+
-+/* UOG_OTGSC Register Bits */
-+/* control bits: */
-+#define OTGSC_CTRL_VBUS_DISCHARGE (1 << 0)
-+#define OTGSC_CTRL_VBUS_CHARGE (1 << 1)
-+#define OTGSC_CTRL_OTG_TERM (1 << 3)/* controls DM pulldown */
-+#define OTGSC_CTRL_DATA_PULSING (1 << 4)
-+#define OTGSC_CTRL_USB_ID_PU (1 << 5) /* enable ID pullup */
-+/* current status: (R/O) */
-+#define OTGSC_STS_USB_ID (1 << 8)/* 0=A-device 1=B-device */
-+#define OTGSC_STS_A_VBUS_VALID (1 << 9)
-+#define OTGSC_STS_A_SESSION_VALID (1 << 10)
-+#define OTGSC_STS_B_SESSION_VALID (1 << 11)
-+#define OTGSC_STS_B_SESSION_END (1 << 12)
-+#define OTGSC_STS_1ms_TIMER (1 << 13)
-+#define OTGSC_STS_DATA_PULSE (1 << 14)
-+/* interrupt status: (write to clear) */
-+#define OTGSC_INTSTS_MASK (0x7f << 16)
-+#define OTGSC_INTSTS_USB_ID (1 << 16)
-+#define OTGSC_INTSTS_A_VBUS_VALID (1 << 17)
-+#define OTGSC_INTSTS_A_SESSION_VALID (1 << 18)
-+#define OTGSC_INTSTS_B_SESSION_VALID (1 << 19)
-+#define OTGSC_INTSTS_B_SESSION_END (1 << 20)
-+#define OTGSC_INTSTS_1MS_TIMER (1 << 21)
-+#define OTGSC_INTSTS_DATA_PULSE (1 << 22)
-+/* interrupt enables: */
-+#define OTGSC_IE_MASK (0x7f << 24)
-+#define OTGSC_IE_USB_ID (1 << 24)
-+#define OTGSC_IE_A_VBUS_VALID (1 << 25)
-+#define OTGSC_IE_A_SESSION_VALID (1 << 26)
-+#define OTGSC_IE_B_SESSION_VALID (1 << 27)
-+#define OTGSC_IE_B_SESSION_END (1 << 28)
-+#define OTGSC_IE_1ms_TIMER (1 << 29)
-+#define OTGSC_IE_DATA_PULSE (1 << 30)
-+
-+#if 1 /* DDD FIXME these here for compatibility between my names and Leo's */
-+/* OTG interrupt enable bit masks */
-+#define OTGSC_INTERRUPT_ENABLE_BITS_MASK OTGSC_IE_MASK
-+
-+/* OTG interrupt status bit masks */
-+#define OTGSC_INTERRUPT_STATUS_BITS_MASK OTGSC_INTSTS_MASK
-+#endif
-+
-+
-+
-+/* x_USBMODE */
-+#undef USBMODE_SDIS /* defined as bit 3 in drivers/usb/host/ehci.h */
-+#define USBMODE_SDIS (1 << 4) /* stream disable mode */
-+#define USBMODE_SLOM (1 << 3) /* setup lockout mode */
-+#define USBMODE_ES (1 << 2) /* (big) endian select */
-+#define USBMODE_CM_MASK (3 << 0) /* controller mode mask */
-+#define USBMODE_CM_HOST (3 << 0) /* host */
-+#define USBMODE_CM_DEVICE (2 << 0) /* device */
-+
-+/* DDD for compatibility for now */
-+#define USB_MODE_CTRL_MODE_IDLE USBMODE_CM_IDLE
-+#define USB_MODE_CTRL_MODE_DEVICE USBMODE_CM_DEVICE
-+#define USB_MODE_CTRL_MODE_HOST USBMODE_CM_HOST
-+#define USB_MODE_SETUP_LOCK_OFF USBMODE_SLOM
-+#define USB_MODE_STREAM_DISABLE USBMODE_SDIS
-+
-+
-+/* ULPIVIEW register bits */
-+#define ULPIVW_WU (1 << 31) /* Wakeup */
-+#define ULPIVW_RUN (1 << 30) /* read/write run */
-+#define ULPIVW_WRITE (1 << 29) /* 0=read 1=write */
-+#define ULPIVW_SS (1 << 27) /* SyncState */
-+#define ULPIVW_PORT_MASK 0x07 /* Port field */
-+#define ULPIVW_PORT_SHIFT 24
-+#define ULPIVW_ADDR_MASK 0xFF /* data address field */
-+#define ULPIVW_ADDR_SHIFT 16
-+#define ULPIVW_RDATA_MASK 0xFF /* read data field */
-+#define ULPIVW_RDATA_SHIFT 8
-+#define ULPIVW_WDATA_MASK 0xFF /* write data field */
-+#define ULPIVW_WDATA_SHIFT 0
-+
-+
-+/* Endpoint Flush Register */
-+#define EPFLUSH_TX_OFFSET 0x00010000
-+#define EPFLUSH_RX_OFFSET 0x00000000
-+
-+/* Endpoint Setup Status bit masks */
-+#define EP_SETUP_STATUS_MASK 0x0000003F
-+#define EP_SETUP_STATUS_EP0 0x00000001
-+
-+/* ENDPOINTCTRLx Register Bit Masks */
-+#define EPCTRL_TX_ENABLE 0x00800000
-+#define EPCTRL_TX_DATA_TOGGLE_RST 0x00400000 /* Not EP0 */
-+#define EPCTRL_TX_DATA_TOGGLE_INH 0x00200000 /* Not EP0 */
-+#define EPCTRL_TX_TYPE 0x000C0000
-+#define EPCTRL_TX_DATA_SOURCE 0x00020000 /* Not EP0 */
-+#define EPCTRL_TX_EP_STALL 0x00010000
-+#define EPCTRL_RX_ENABLE 0x00000080
-+#define EPCTRL_RX_DATA_TOGGLE_RST 0x00000040 /* Not EP0 */
-+#define EPCTRL_RX_DATA_TOGGLE_INH 0x00000020 /* Not EP0 */
-+#define EPCTRL_RX_TYPE 0x0000000C
-+#define EPCTRL_RX_DATA_SINK 0x00000002 /* Not EP0 */
-+#define EPCTRL_RX_EP_STALL 0x00000001
-+
-+/* bit 19-18 and 3-2 are endpoint type */
-+#define EPCTRL_EP_TYPE_CONTROL 0
-+#define EPCTRL_EP_TYPE_ISO 1
-+#define EPCTRL_EP_TYPE_BULK 2
-+#define EPCTRL_EP_TYPE_INTERRUPT 3
-+#define EPCTRL_TX_EP_TYPE_SHIFT 18
-+#define EPCTRL_RX_EP_TYPE_SHIFT 2
-+
-+/* pri_ctrl Register Bit Masks */
-+#define PRI_CTRL_PRI_LVL1 0x0000000C
-+#define PRI_CTRL_PRI_LVL0 0x00000003
-+
-+/* si_ctrl Register Bit Masks */
-+#define SI_CTRL_ERR_DISABLE 0x00000010
-+#define SI_CTRL_IDRC_DISABLE 0x00000008
-+#define SI_CTRL_RD_SAFE_EN 0x00000004
-+#define SI_CTRL_RD_PREFETCH_DISABLE 0x00000002
-+#define SI_CTRL_RD_PREFEFETCH_VAL 0x00000001
-+
-+
-+/* control Register Bit Masks */
-+#define USB_CTRL_IOENB 0x00000004
-+#define USB_CTRL_ULPI_INT0EN 0x00000001
-+
-+
-+/* Endpoint Transfer Descriptor bit Masks */
-+#define DTD_NEXT_TERMINATE 0x00000001
-+#define DTD_IOC 0x00008000
-+#define DTD_STATUS_ACTIVE 0x00000080
-+#define DTD_STATUS_HALTED 0x00000040
-+#define DTD_STATUS_DATA_BUFF_ERR 0x00000020
-+#define DTD_STATUS_TRANSACTION_ERR 0x00000008
-+#define DTD_RESERVED_FIELDS 0x80007300
-+#define DTD_ADDR_MASK 0xFFFFFFE0
-+#define DTD_PACKET_SIZE 0x7FFF0000
-+#define DTD_LENGTH_BIT_POS 16
-+#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \
-+ DTD_STATUS_DATA_BUFF_ERR | \
-+ DTD_STATUS_TRANSACTION_ERR)
-+/* Alignment requirements; must be a power of two */
-+#define DTD_ALIGNMENT 0x20
-+#define QH_ALIGNMENT 2048
-+
-+/* Controller dma boundary */
-+#define UDC_DMA_BOUNDARY 0x1000
-+
-+#endif /* __FSL_USB2_H */
---- /dev/null
-+++ b/include/linux/usb/fsl_xcvr.h
-@@ -0,0 +1,36 @@
-+/*
-+ * Copyright 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+/**
-+ * struct fsl_xcvr_ops - USB transceiver operations
-+ *
-+ * @xcvr_type: one of PORTSCX_PTS_{UTMI,SERIAL,ULPI}
-+ * @init: transceiver- and board-specific initialization function
-+ * @uninit: transceiver- and board-specific uninitialization function
-+ * @set_host:
-+ * @set_device:
-+ *
-+ */
-+struct fsl_xcvr_ops {
-+ char *name;
-+ u32 xcvr_type;
-+ struct fsl_usb2_platform_data *pdata;
-+
-+ void (*init)(struct fsl_xcvr_ops *ops);
-+ void (*uninit)(struct fsl_xcvr_ops *ops);
-+ void (*suspend)(struct fsl_xcvr_ops *ops);
-+ void (*set_host)(void);
-+ void (*set_device)(void);
-+ void (*set_vbus_power)(struct fsl_xcvr_ops *ops, int on);
-+ void (*set_remote_wakeup)(u32 *view);
-+ void (*pullup)(int on);
-+};
-+
-+extern void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops);
-+extern void fsl_usb_xcvr_unregister(struct fsl_xcvr_ops *xcvr_ops);
---- a/include/linux/usb/otg.h
-+++ b/include/linux/usb/otg.h
-@@ -164,7 +164,7 @@ otg_shutdown(struct otg_transceiver *otg
- }
-
- /* for usb host and peripheral controller drivers */
--#ifdef CONFIG_USB_OTG_UTILS
-+#if defined(CONFIG_USB_OTG_UTILS) || defined(CONFIG_COLDFIRE)
- extern struct otg_transceiver *otg_get_transceiver(void);
- extern void otg_put_transceiver(struct otg_transceiver *);
- #else
diff --git a/target/linux/coldfire/patches/041-Fix-CAU-driver-bug-for-SHA1-digest-algorithm.patch b/target/linux/coldfire/patches/041-Fix-CAU-driver-bug-for-SHA1-digest-algorithm.patch
deleted file mode 100644
index 87df780..0000000
--- a/target/linux/coldfire/patches/041-Fix-CAU-driver-bug-for-SHA1-digest-algorithm.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From da0df827fa9600b3104d4b8d8cc3edbdd5a0849b Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:53 +0800
-Subject: [PATCH 41/52] Fix CAU driver bug for SHA1 digest algorithm
-
-Make the compiler to never inline a particular member
-function.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/crypto/mcfcau-sha1.c | 3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
---- a/drivers/crypto/mcfcau-sha1.c
-+++ b/drivers/crypto/mcfcau-sha1.c
-@@ -60,7 +60,8 @@ struct mcfcau_sha1_ctx {
- u8 buffer[64];
- };
-
--static void mcfcau_sha1_transform(__u32 *digest, const char *in, __u32 *W)
-+static noinline void mcfcau_sha1_transform(__u32 *digest,
-+ const char *in, __u32 *W)
- {
- int i;
- u32 *tmp_p;
diff --git a/target/linux/coldfire/patches/042-Fix-NEED_MULTIPLE_NODES-unmet-direct-dependencies-wa.patch b/target/linux/coldfire/patches/042-Fix-NEED_MULTIPLE_NODES-unmet-direct-dependencies-wa.patch
deleted file mode 100644
index 336afab..0000000
--- a/target/linux/coldfire/patches/042-Fix-NEED_MULTIPLE_NODES-unmet-direct-dependencies-wa.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 77910a929baaf0ecba893e6e54857315384dc374 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:54 +0800
-Subject: [PATCH 42/52] Fix NEED_MULTIPLE_NODES unmet direct dependencies warning
-
-Fix the warning that "(SINGLE_MEMORY_CHUNK) selects NEED_MULTIPLE_NODES
-which has unmet direct dependencies (DISCONTIGMEM || NUMA)".
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- mm/Kconfig | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/mm/Kconfig
-+++ b/mm/Kconfig
-@@ -84,7 +84,7 @@ config FLAT_NODE_MEM_MAP
- #
- config NEED_MULTIPLE_NODES
- def_bool y
-- depends on DISCONTIGMEM || NUMA
-+ depends on DISCONTIGMEM || NUMA || COLDFIRE
-
- config HAVE_MEMORY_PRESENT
- def_bool y
diff --git a/target/linux/coldfire/patches/043-workaround-for-zero-page-used-on-ColdFire-platform.patch b/target/linux/coldfire/patches/043-workaround-for-zero-page-used-on-ColdFire-platform.patch
deleted file mode 100644
index 0182b09..0000000
--- a/target/linux/coldfire/patches/043-workaround-for-zero-page-used-on-ColdFire-platform.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From fa27f3e27863e3f4376864b144dc7506de124cf6 Mon Sep 17 00:00:00 2001
-From: Jason Jin <Jason.jin@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:54 +0800
-Subject: [PATCH 43/52] workaround for zero page used on ColdFire platform.
-
-There is some issue for Coldfire platform to use the
-zero page for read when there is memory fault. This is
-a workaround for this, try to make kernel to use normal
-memory instead.
-
-Signed-off-by: Jason Jin <Jason.jin@freescale.com>
----
- mm/memory.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/mm/memory.c
-+++ b/mm/memory.c
-@@ -2937,6 +2937,7 @@ static int do_anonymous_page(struct mm_s
- if (check_stack_guard_page(vma, address) < 0)
- return VM_FAULT_SIGBUS;
-
-+#ifndef CONFIG_COLDFIRE
- /* Use the zero-page for reads */
- if (!(flags & FAULT_FLAG_WRITE)) {
- entry = pte_mkspecial(pfn_pte(my_zero_pfn(address),
-@@ -2946,6 +2947,7 @@ static int do_anonymous_page(struct mm_s
- goto unlock;
- goto setpte;
- }
-+#endif
-
- /* Allocate our own private page. */
- if (unlikely(anon_vma_prepare(vma)))
diff --git a/target/linux/coldfire/patches/044-Fix-Max3353-otg-toggle-bug.patch b/target/linux/coldfire/patches/044-Fix-Max3353-otg-toggle-bug.patch
deleted file mode 100644
index 218d49c..0000000
--- a/target/linux/coldfire/patches/044-Fix-Max3353-otg-toggle-bug.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From ff4fb46407f3aee09432a897822e4934d5c6b3ff Mon Sep 17 00:00:00 2001
-From: Jingchang Lu <b35083@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:54 +0800
-Subject: [PATCH 44/52] Fix Max3353 otg toggle bug
-
-The max3353 charge pump work with SOC FS/LS transceiver,
-during dual role toggle, the root hub port should be powered
-off to disable port status detection when suspend host mode,
-otherwise it won't work properly when switch to host mode.
-
-Signed-off-by: Jingchang Lu <b35083@freescale.com>
----
- drivers/usb/host/ehci-fsl.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/usb/host/ehci-fsl.c
-+++ b/drivers/usb/host/ehci-fsl.c
-@@ -528,7 +528,7 @@ static int ehci_fsl_suspend(struct devic
- pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
-
- pdata->suspended = 1;
--#if 0
-+#if defined(CONFIG_USB_M5441X_MAX3353_FSLS)
- /* clear PP to cut power to the port */
- tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
- tmp &= ~PORT_POWER;
diff --git a/target/linux/coldfire/patches/045-Add-high-resolution-kernel-timer-support.patch b/target/linux/coldfire/patches/045-Add-high-resolution-kernel-timer-support.patch
deleted file mode 100644
index 523d157..0000000
--- a/target/linux/coldfire/patches/045-Add-high-resolution-kernel-timer-support.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From aedec75c772919fa77c33854d3389d8ca73c25bf Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:54 +0800
-Subject: [PATCH 45/52] Add high-resolution kernel timer support
-
-This patch fixed the bug that high-resolution kernel timer
-could not be enabled. ARCH_USES_GETTIMEOFFSET is disabled.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/Kconfig | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/arch/m68k/Kconfig
-+++ b/arch/m68k/Kconfig
-@@ -64,7 +64,7 @@ config HZ
- default 100
-
- config ARCH_USES_GETTIMEOFFSET
-- def_bool y
-+ def_bool n
-
- source "init/Kconfig"
-
diff --git a/target/linux/coldfire/patches/046-Convert-rtc-drivers-to-use-the-alarm_irq_enable-meth.patch b/target/linux/coldfire/patches/046-Convert-rtc-drivers-to-use-the-alarm_irq_enable-meth.patch
deleted file mode 100644
index e1c346c..0000000
--- a/target/linux/coldfire/patches/046-Convert-rtc-drivers-to-use-the-alarm_irq_enable-meth.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From ab2284cd4730b9ea29937ee3a0ef1bcdc6b3159d Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:54 +0800
-Subject: [PATCH 46/52] Convert rtc drivers to use the alarm_irq_enable method
-
-Old rtc drivers use the ioctl method instead of the alarm_irq_enable
-method for enabling alarm interupts. With the new virtualized RTC
-rework, its important for drivers to use the alarm_irq_enable instead.
-
-This patch converts the drivers that use the AIE ioctl method to
-use the alarm_irq_enable method.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/rtc/rtc-m5441x.c | 22 +++++++++++-----------
- drivers/rtc/rtc-mcf.c | 23 +++++++++++------------
- 2 files changed, 22 insertions(+), 23 deletions(-)
-
---- a/drivers/rtc/rtc-m5441x.c
-+++ b/drivers/rtc/rtc-m5441x.c
-@@ -400,17 +400,6 @@ static int mcf_rtc_ioctl(struct device *
- writew((readw(MCF_RTC_IER) | PIE_BIT_DEF[i][1]), MCF_RTC_IER);
- spin_unlock_irq(&rtc_lock);
- return 0;
-- case RTC_AIE_OFF:
-- spin_lock_irq(&rtc_lock);
-- writew((readw(MCF_RTC_IER) & ~MCF_RTC_ISR_ALM), MCF_RTC_IER);
-- spin_unlock_irq(&rtc_lock);
-- return 0;
--
-- case RTC_AIE_ON:
-- spin_lock_irq(&rtc_lock);
-- writew((readw(MCF_RTC_IER) | MCF_RTC_ISR_ALM), MCF_RTC_IER);
-- spin_unlock_irq(&rtc_lock);
-- return 0;
-
- case RTC_UIE_OFF: /* UIE is for the 1Hz interrupt */
- spin_lock_irq(&rtc_lock);
-@@ -427,6 +416,16 @@ static int mcf_rtc_ioctl(struct device *
- return -ENOIOCTLCMD;
- }
-
-+static int mcf_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
-+{
-+ if (enabled)
-+ writew((readw(MCF_RTC_IER) | MCF_RTC_ISR_ALM), MCF_RTC_IER);
-+ else
-+ writew((readw(MCF_RTC_IER) & ~MCF_RTC_ISR_ALM), MCF_RTC_IER);
-+
-+ return 0;
-+}
-+
- /*!
- * This function reads the current RTC time into tm in Gregorian date.
- *
-@@ -534,6 +533,7 @@ static struct rtc_class_ops mcf_rtc_ops
- .set_time = mcf_rtc_set_time,
- .read_alarm = mcf_rtc_read_alarm,
- .set_alarm = mcf_rtc_set_alarm,
-+ .alarm_irq_enable = mcf_rtc_alarm_irq_enable,
- };
-
- static int __devinit mcf_rtc_probe(struct platform_device *pdev)
---- a/drivers/rtc/rtc-mcf.c
-+++ b/drivers/rtc/rtc-mcf.c
-@@ -298,18 +298,6 @@ static int mcf_rtc_ioctl(struct device *
- writel((readl(MCF_RTC_IER) | PIE_BIT_DEF[i][1]), MCF_RTC_IER);
- spin_unlock_irq(&rtc_lock);
- return 0;
-- case RTC_AIE_OFF:
-- spin_lock_irq(&rtc_lock);
-- writel((readl(MCF_RTC_IER) & ~MCF_RTC_ISR_ALM), MCF_RTC_IER);
-- spin_unlock_irq(&rtc_lock);
-- return 0;
--
-- case RTC_AIE_ON:
-- spin_lock_irq(&rtc_lock);
-- writel((readl(MCF_RTC_IER) | MCF_RTC_ISR_ALM), MCF_RTC_IER);
-- spin_unlock_irq(&rtc_lock);
-- return 0;
--
- case RTC_UIE_OFF: /* UIE is for the 1Hz interrupt */
- spin_lock_irq(&rtc_lock);
- writel((readl(MCF_RTC_IER) & ~MCF_RTC_ISR_1HZ), MCF_RTC_IER);
-@@ -325,6 +313,16 @@ static int mcf_rtc_ioctl(struct device *
- return -ENOIOCTLCMD;
- }
-
-+static int mcf_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
-+{
-+ if (enabled)
-+ writel((readl(MCF_RTC_IER) | MCF_RTC_ISR_ALM), MCF_RTC_IER);
-+ else
-+ writel((readl(MCF_RTC_IER) & ~MCF_RTC_ISR_ALM), MCF_RTC_IER);
-+
-+ return 0;
-+}
-+
- /*!
- * This function reads the current RTC time into tm in Gregorian date.
- *
-@@ -466,6 +464,7 @@ static struct rtc_class_ops mcf_rtc_ops
- .read_alarm = mcf_rtc_read_alarm,
- .set_alarm = mcf_rtc_set_alarm,
- .proc = mcf_rtc_proc,
-+ .alarm_irq_enable = mcf_rtc_alarm_irq_enable,
- };
-
- static int __devinit mcf_rtc_probe(struct platform_device *pdev)
diff --git a/target/linux/coldfire/patches/047-Fix-DSPI-compile-error-for-MCF547x-MCF548x.patch b/target/linux/coldfire/patches/047-Fix-DSPI-compile-error-for-MCF547x-MCF548x.patch
deleted file mode 100644
index 2ef056e..0000000
--- a/target/linux/coldfire/patches/047-Fix-DSPI-compile-error-for-MCF547x-MCF548x.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 7751684dc81d357bc9a226f12b9f12b14c824c54 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:54 +0800
-Subject: [PATCH 47/52] Fix DSPI compile error for MCF547x/MCF548x
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m547x/devices.c | 2 +-
- arch/m68k/include/asm/mcfdspi.h | 8 ++++++++
- 2 files changed, 9 insertions(+), 1 deletions(-)
-
---- a/arch/m68k/coldfire/m547x/devices.c
-+++ b/arch/m68k/coldfire/m547x/devices.c
-@@ -17,7 +17,7 @@
-
- #include <asm/coldfire.h>
- #include <asm/mcfsim.h>
--#include <asm/mcfqspi.h>
-+#include <asm/mcfdspi.h>
-
-
- #ifdef CONFIG_SPI
---- a/arch/m68k/include/asm/mcfdspi.h
-+++ b/arch/m68k/include/asm/mcfdspi.h
-@@ -56,4 +56,12 @@ struct coldfire_spi_master {
- u32 *irq_list;
- void (*cs_control)(u8 cs, u8 command);
- };
-+
-+struct coldfire_spi_chip {
-+ u8 mode;
-+ u8 bits_per_word;
-+ u8 del_cs_to_clk;
-+ u8 del_after_trans;
-+ u16 void_write_data;
-+};
- #endif /*MCFDSPI_H_*/
diff --git a/target/linux/coldfire/patches/048-Fix-i2c-driver-bug-when-reinserting-as-module.patch b/target/linux/coldfire/patches/048-Fix-i2c-driver-bug-when-reinserting-as-module.patch
deleted file mode 100644
index a85aa56..0000000
--- a/target/linux/coldfire/patches/048-Fix-i2c-driver-bug-when-reinserting-as-module.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 2c83888b2170d3883c9316c4d94dddc4b7f9ec68 Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:55 +0800
-Subject: [PATCH 48/52] Fix i2c driver bug when reinserting as module
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/i2c/busses/i2c-mcf-slave.c | 14 ++++++++++++++
- drivers/i2c/busses/i2c-mcf.c | 14 ++++++++++++++
- 2 files changed, 28 insertions(+), 0 deletions(-)
-
---- a/drivers/i2c/busses/i2c-mcf-slave.c
-+++ b/drivers/i2c/busses/i2c-mcf-slave.c
-@@ -273,8 +273,15 @@ static int __init gen_i2c_proc_init(void
- return -ENOMEM;
- return 0;
- }
-+
-+static int gen_i2c_proc_deinit(void)
-+{
-+ remove_proc_entry("driver/i2c-adaptor-register", NULL);
-+ return 0;
-+}
- #else
- static inline int gen_i2c_proc_init(void) { return 0; }
-+static inline int gen_i2c_proc_deinit(void) { return 0; }
- #endif /* CONFIG_PROC_FS */
-
- /*
-@@ -345,6 +352,13 @@ static int __init i2c_coldfire_init(void
-
- static void __exit i2c_coldfire_exit(void)
- {
-+ int retval;
-+
-+ retval = gen_i2c_proc_deinit();
-+ if (retval < 0)
-+ printk(KERN_INFO "remove /proc/i2c-adaptor-register "
-+ "for i2c slave mode failed!\n");
-+
- /* disable I2C and Interrupt */
- MCF_I2CR &= ~(MCF_I2CR_IEN | MCF_I2CR_IIEN);
- free_irq(IRQ, NULL);
---- a/drivers/i2c/busses/i2c-mcf.c
-+++ b/drivers/i2c/busses/i2c-mcf.c
-@@ -669,8 +669,15 @@ static int __init gen_i2c_proc_init(void
- return -ENOMEM;
- return 0;
- }
-+
-+static int gen_i2c_proc_deinit(void)
-+{
-+ remove_proc_entry("driver/i2c-adaptor-register", NULL);
-+ return 0;
-+}
- #else
- static inline int gen_i2c_proc_init(void) { return 0; }
-+static inline int gen_i2c_proc_deinit(void) { return 0; }
- #endif /* CONFIG_PROC_FS */
-
- static int __init coldfire_i2c_init(void)
-@@ -687,6 +694,13 @@ static int __init coldfire_i2c_init(void
-
- static void __exit coldfire_i2c_exit(void)
- {
-+ int retval;
-+
-+ retval = gen_i2c_proc_deinit();
-+ if (retval < 0)
-+ printk(KERN_INFO "remove /proc/i2c-adaptor-register "
-+ "for i2c master mode failed!\n");
-+
- platform_driver_unregister(&mcf_i2c_driver);
- }
-
diff --git a/target/linux/coldfire/patches/049-Update-FEC-driver-for-MCF5445x-and-MCF54418.patch b/target/linux/coldfire/patches/049-Update-FEC-driver-for-MCF5445x-and-MCF54418.patch
deleted file mode 100644
index 3a25350..0000000
--- a/target/linux/coldfire/patches/049-Update-FEC-driver-for-MCF5445x-and-MCF54418.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From bb6fd2eef9359aff90f78b8791967a37e3284784 Mon Sep 17 00:00:00 2001
-From: Jason Jin <jason.jin@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:55 +0800
-Subject: [PATCH 49/52] Update FEC driver for MCF5445x and MCF54418
-
-This patch fixed the bug that FEC could not support 10Mbps
-for MCF5445x.
-This patch also improved FEC performance.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
-Signed-off-by: Jason Jin <jason.jin@freescale.com>
----
- arch/m68k/coldfire/m5441x/fec.c | 4 ++--
- arch/m68k/coldfire/m5445x/fec.c | 17 +++++++++++++++--
- drivers/net/fec.c | 9 +++++----
- 3 files changed, 22 insertions(+), 8 deletions(-)
-
---- a/arch/m68k/coldfire/m5441x/fec.c
-+++ b/arch/m68k/coldfire/m5441x/fec.c
-@@ -98,7 +98,7 @@ static struct fec_platform_data m54418_f
- };
-
- static struct platform_device fec0_coldfire_device = {
-- .name = "m54418-fec",
-+ .name = "coldfire-fec",
- .id = 0,
- .resource = fec0_resources,
- .num_resources = ARRAY_SIZE(fec0_resources),
-@@ -109,7 +109,7 @@ static struct platform_device fec0_coldf
-
- #if defined(CONFIG_FEC2)
- static struct platform_device fec1_coldfire_device = {
-- .name = "m54418-fec",
-+ .name = "coldfire-fec",
- .id = 1,
- .resource = fec1_resources,
- .num_resources = ARRAY_SIZE(fec1_resources),
---- a/arch/m68k/coldfire/m5445x/fec.c
-+++ b/arch/m68k/coldfire/m5445x/fec.c
-@@ -34,6 +34,10 @@
- #include <linux/skbuff.h>
- #include <linux/spinlock.h>
- #include <linux/workqueue.h>
-+#include <linux/platform_device.h>
-+#include <linux/fec.h>
-+#include <linux/io.h>
-+
- #include <asm/pgtable.h>
-
- #include <asm/traps.h>
-@@ -89,19 +93,28 @@ static struct resource fec1_resources[]
- };
- #endif
-
-+static struct fec_platform_data m5445x_fec_pdata = {
-+ .phy = PHY_INTERFACE_MODE_RMII,
-+};
- static struct platform_device fec0_coldfire_device = {
-- .name = "fec",
-+ .name = "coldfire-fec",
- .id = 0,
- .resource = fec0_resources,
- .num_resources = ARRAY_SIZE(fec0_resources),
-+ .dev = {
-+ .platform_data = &m5445x_fec_pdata,
-+ }
- };
-
- #if defined(CONFIG_FEC2)
- static struct platform_device fec1_coldfire_device = {
-- .name = "fec",
-+ .name = "coldfire-fec",
- .id = 1,
- .resource = fec1_resources,
- .num_resources = ARRAY_SIZE(fec1_resources),
-+ .dev = {
-+ .platform_data = &m5445x_fec_pdata,
-+ }
- };
- #endif
-
---- a/drivers/net/fec.c
-+++ b/drivers/net/fec.c
-@@ -76,7 +76,7 @@ static struct platform_device_id fec_dev
- .name = "imx28-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
- }, {
-- .name = "m54418-fec",
-+ .name = "coldfire-fec",
- .driver_data = FEC_QUIRK_ENET_MAC,
- },
- { }
-@@ -341,8 +341,9 @@ fec_enet_start_xmit(struct sk_buff *skb,
- /* Push the data cache so the CPM does not get stale memory
- * data.
- */
-- bdp->cbd_bufaddr = dma_map_single(&dev->dev, bufaddr,
-- FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
-+ bdp->cbd_bufaddr = __pa(bufaddr);
-+ flush_dcache_range((unsigned long)skb->data,
-+ (unsigned long)skb->data + skb->len);
-
- /* Send it on its way. Tell FEC it's ready, interrupt when done,
- * it's the last BD of the frame, and to put the CRC on the end.
-@@ -1074,7 +1075,7 @@ static int fec_enet_alloc_buffers(struct
-
- bdp = fep->tx_bd_base;
- for (i = 0; i < TX_RING_SIZE; i++) {
-- fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_KERNEL);
-+ fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_DMA);
-
- bdp->cbd_sc = 0;
- bdp->cbd_bufaddr = 0;
diff --git a/target/linux/coldfire/patches/050-Update-the-DMA-map-function-for-CF-platform.patch b/target/linux/coldfire/patches/050-Update-the-DMA-map-function-for-CF-platform.patch
deleted file mode 100644
index a0a7ba7..0000000
--- a/target/linux/coldfire/patches/050-Update-the-DMA-map-function-for-CF-platform.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 2411a3e2b5dfa4784bbe2548f8ef0ce1aea0379e Mon Sep 17 00:00:00 2001
-From: Jason Jin <Jason.jin@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:55 +0800
-Subject: [PATCH 50/52] Update the DMA map function for CF platform
-
-In the DMA map, only the dcache need to be flushed.
-Flush both dcache and icache will decrease the system
-performance.
-
-Signed-off-by: Jason Jin <Jason.jin@freescale.com>
----
- arch/m68k/kernel/dma.c | 12 ++++++++++--
- 1 files changed, 10 insertions(+), 2 deletions(-)
-
---- a/arch/m68k/kernel/dma.c
-+++ b/arch/m68k/kernel/dma.c
-@@ -94,10 +94,18 @@ void dma_sync_single_for_device(struct d
- {
- switch (dir) {
- case DMA_TO_DEVICE:
-- cache_push(handle, size);
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+ flush_dcache_range(handle, handle + size);
-+#else
-+ flush_dcache();
-+#endif
- break;
- case DMA_FROM_DEVICE:
-- cache_clear(handle, size);
-+#if defined(CONFIG_M5445X) || defined(CONFIG_M5441X)
-+ cf_dcache_inv_range(handle, handle + size);
-+#else
-+ flush_dcache();
-+#endif
- break;
- case PCI_DMA_BIDIRECTIONAL:
- flush_dcache();
diff --git a/target/linux/coldfire/patches/051-Update-SD-MMC-over-SPI-driver-for-MCF54451-and-MCF54.patch b/target/linux/coldfire/patches/051-Update-SD-MMC-over-SPI-driver-for-MCF54451-and-MCF54.patch
deleted file mode 100644
index a92acdc..0000000
--- a/target/linux/coldfire/patches/051-Update-SD-MMC-over-SPI-driver-for-MCF54451-and-MCF54.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From 44d4e083f1527e0acc6d25eadd5258565c3b8a3a Mon Sep 17 00:00:00 2001
-From: Alison Wang <b18965@freescale.com>
-Date: Thu, 4 Aug 2011 09:59:55 +0800
-Subject: [PATCH 51/52] Update SD/MMC over SPI driver for MCF54451 and MCF54418
-
-This patch fixed the errors in initialization and module mode.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5445x/devices.c | 6 +++---
- drivers/mmc/host/Kconfig | 8 ++++----
- drivers/spi/spi.c | 4 ++++
- 3 files changed, 11 insertions(+), 7 deletions(-)
-
---- a/arch/m68k/coldfire/m5445x/devices.c
-+++ b/arch/m68k/coldfire/m5445x/devices.c
-@@ -20,7 +20,7 @@
-
- #include <linux/interrupt.h>
- #include <linux/init.h>
--#ifdef CONFIG_MMC_SPI
-+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
- #include <linux/mmc/host.h>
- #include <linux/spi/mmc_spi.h>
- #endif
-@@ -107,7 +107,7 @@ static struct coldfire_dspi_chip codec_s
- };
- #endif
-
--#if defined(CONFIG_MMC_SPI)
-+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
- int mmc_spi_init(struct device *mmc_spi_device,
- irqreturn_t mmc_spi_irq_handler(int irq, void *private),
- void *irq_privatedata)
-@@ -234,7 +234,7 @@ static struct spi_board_info spi_board_i
- },
- #endif
-
--#if defined(CONFIG_MMC_SPI)
-+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 25000000,
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -369,7 +369,7 @@ config MMC_SPI
- If unsure, or if your system has no SPI master driver, say N.
-
- config M54451_SD_HW_DETECT
-- tristate "use extern IRQ7 to detect SD/MMC card"
-+ bool "use extern IRQ7 to detect SD/MMC card"
- depends on MMC_SPI && M54451
- default y
- help
-@@ -377,7 +377,7 @@ config M54451_SD_HW_DETECT
- use irq7 to dectect the card inserting/removing.
-
- config M5441X_SD_HW_DETECT
-- tristate "use extern IRQ to detect SD/MMC card"
-+ bool "use extern IRQ to detect SD/MMC card"
- depends on MMC_SPI && M5441X
- help
- MMC/SD interface on 54418evb was over SPI. Enable this option will
-@@ -388,14 +388,14 @@ choice
- depends on M5441X_SD_HW_DETECT
-
- config DETECT_USE_EXTERN_IRQ7
-- tristate "based extern IRQ7"
-+ bool "based extern IRQ7"
- depends on M5441X_SD_HW_DETECT
- help
- MMC/SD cards using spi controller,
- we use the extern irq7 to detect card.
-
- config DETECT_USE_EXTERN_IRQ1
-- tristate "based extern IRQ1"
-+ bool "based extern IRQ1"
- depends on M5441X_SD_HW_DETECT
- help
- MMC/SD cards using spi controller,
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -725,18 +725,22 @@ EXPORT_SYMBOL_GPL(spi_busnum_to_master);
- */
- int spi_setup(struct spi_device *spi)
- {
-+#ifndef CONFIG_COLDFIRE
- unsigned bad_bits;
-+#endif
- int status;
-
- /* help drivers fail *cleanly* when they need options
- * that aren't supported with their current master
- */
-+#ifndef CONFIG_COLDFIRE
- bad_bits = spi->mode & ~spi->master->mode_bits;
- if (bad_bits) {
- dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
- bad_bits);
- return -EINVAL;
- }
-+#endif
-
- if (!spi->bits_per_word)
- spi->bits_per_word = 8;
diff --git a/target/linux/coldfire/patches/052-Update-the-default-configurations-for-ColdFire-V4-bo.patch b/target/linux/coldfire/patches/052-Update-the-default-configurations-for-ColdFire-V4-bo.patch
deleted file mode 100644
index 47377cf..0000000
--- a/target/linux/coldfire/patches/052-Update-the-default-configurations-for-ColdFire-V4-bo.patch
+++ /dev/null
@@ -1,6983 +0,0 @@
-From f8d6deb475cbd61487f2551641d1e0977d0c75bd Mon Sep 17 00:00:00 2001
-From: Jason Jin <Jason.jin@freescale.com>
-Date: Thu, 4 Aug 2011 12:38:36 +0800
-Subject: [PATCH 52/52] Update the default configurations for ColdFire V4 boards
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/configs/m54418twr_defconfig | 376 +++++++++++++++--------
- arch/m68k/configs/m54451evb_defconfig | 443 +++++++++++++++++----------
- arch/m68k/configs/m54455evb_defconfig | 524 +++++++++++++++++++++----------
- arch/m68k/configs/m5474lite_defconfig | 403 ++++++++++++++++---------
- arch/m68k/configs/m5475evb_defconfig | 444 +++++++++++++++++++---------
- arch/m68k/configs/m5485evb_defconfig | 544 +++++++++++++++++++++++----------
- 6 files changed, 1842 insertions(+), 892 deletions(-)
-
---- a/arch/m68k/configs/m54418twr_defconfig
-+++ b/arch/m68k/configs/m54418twr_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.29
--# Fri Apr 23 14:36:43 2010
-+# Linux kernel version: 2.6.38
-+# Fri Jul 15 08:51:59 2011
- #
- CONFIG_M68K=y
- CONFIG_MMU=y
-@@ -17,7 +17,9 @@ CONFIG_GENERIC_IOMAP=y
- # CONFIG_NO_IOPORT is not set
- # CONFIG_NO_DMA is not set
- CONFIG_HZ=100
-+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+CONFIG_CONSTRUCTORS=y
-
- #
- # General setup
-@@ -25,6 +27,7 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNA
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_CROSS_COMPILE=""
- CONFIG_LOCALVERSION=""
- CONFIG_LOCALVERSION_AUTO=y
- CONFIG_SWAP=y
-@@ -34,33 +37,35 @@ CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_AUDIT is not set
-+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-
- #
- # RCU Subsystem
- #
--CONFIG_CLASSIC_RCU=y
--# CONFIG_TREE_RCU is not set
-+CONFIG_TINY_RCU=y
- # CONFIG_PREEMPT_RCU is not set
-+# CONFIG_RCU_TRACE is not set
- # CONFIG_TREE_RCU_TRACE is not set
--# CONFIG_PREEMPT_RCU_TRACE is not set
- CONFIG_IKCONFIG=y
- CONFIG_IKCONFIG_PROC=y
- CONFIG_LOG_BUF_SHIFT=17
--CONFIG_GROUP_SCHED=y
--CONFIG_FAIR_GROUP_SCHED=y
--# CONFIG_RT_GROUP_SCHED is not set
--CONFIG_USER_SCHED=y
--# CONFIG_CGROUP_SCHED is not set
- # CONFIG_CGROUPS is not set
-+# CONFIG_NAMESPACES is not set
-+# CONFIG_SCHED_AUTOGROUP is not set
- CONFIG_SYSFS_DEPRECATED=y
- CONFIG_SYSFS_DEPRECATED_V2=y
- # CONFIG_RELAY is not set
--# CONFIG_NAMESPACES is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_RD_GZIP=y
-+# CONFIG_RD_BZIP2 is not set
-+# CONFIG_RD_LZMA is not set
-+# CONFIG_RD_XZ is not set
-+# CONFIG_RD_LZO is not set
- # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
- CONFIG_ANON_INODES=y
-+CONFIG_EXPERT=y
- CONFIG_EMBEDDED=y
- CONFIG_UID16=y
- CONFIG_SYSCTL_SYSCALL=y
-@@ -78,12 +83,20 @@ CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_AIO=y
-+
-+#
-+# Kernel Performance Events And Counters
-+#
- CONFIG_VM_EVENT_COUNTERS=y
- CONFIG_COMPAT_BRK=y
- CONFIG_SLAB=y
- # CONFIG_SLUB is not set
- # CONFIG_SLOB is not set
- # CONFIG_PROFILING is not set
-+
-+#
-+# GCOV-based kernel profiling
-+#
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
-@@ -95,8 +108,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_BLOCK=y
--CONFIG_LBD=y
--# CONFIG_BLK_DEV_IO_TRACE is not set
-+CONFIG_LBDAF=y
- # CONFIG_BLK_DEV_BSG is not set
- # CONFIG_BLK_DEV_INTEGRITY is not set
-
-@@ -104,14 +116,41 @@ CONFIG_LBD=y
- # IO Schedulers
- #
- CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
- CONFIG_IOSCHED_DEADLINE=y
- CONFIG_IOSCHED_CFQ=y
--# CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_INLINE_SPIN_TRYLOCK is not set
-+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK is not set
-+# CONFIG_INLINE_SPIN_LOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_SPIN_UNLOCK=y
-+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_READ_TRYLOCK is not set
-+# CONFIG_INLINE_READ_LOCK is not set
-+# CONFIG_INLINE_READ_LOCK_BH is not set
-+# CONFIG_INLINE_READ_LOCK_IRQ is not set
-+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_READ_UNLOCK=y
-+# CONFIG_INLINE_READ_UNLOCK_BH is not set
-+CONFIG_INLINE_READ_UNLOCK_IRQ=y
-+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_WRITE_TRYLOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK_BH is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_WRITE_UNLOCK=y
-+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
- # CONFIG_FREEZER is not set
-
- #
-@@ -151,6 +190,10 @@ CONFIG_SDRAM_SIZE=0x08000000
- CONFIG_NOR_FLASH_BASE=0x00000000
- CONFIG_DMA_BASE=0xdf000000
- CONFIG_DMA_SIZE=0x1000000
-+CONFIG_SRAM=y
-+CONFIG_SRAM_BASE=0x8ff00000
-+CONFIG_SRAM_SIZE=0x10000
-+CONFIG_SRAM_ALLOC_GRANULARITY=0x200
- # CONFIG_VDSO is not set
- # CONFIG_M68KFPU_EMU is not set
- CONFIG_ADVANCED=y
-@@ -159,18 +202,19 @@ CONFIG_SINGLE_MEMORY_CHUNK=y
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
- CONFIG_SELECT_MEMORY_MODEL=y
- CONFIG_FLATMEM_MANUAL=y
--# CONFIG_DISCONTIGMEM_MANUAL is not set
--# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- CONFIG_NEED_MULTIPLE_NODES=y
- CONFIG_PAGEFLAGS_EXTENDED=y
- CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_COMPACTION is not set
- # CONFIG_PHYS_ADDR_T_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
- CONFIG_BOUNCE=y
- CONFIG_VIRT_TO_BUS=y
--CONFIG_UNEVICTABLE_LRU=y
-+# CONFIG_KSM is not set
-+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-+CONFIG_NEED_PER_CPU_KM=y
-
- #
- # General setup
-@@ -193,9 +237,7 @@ CONFIG_NET=y
- #
- # Networking options
- #
--CONFIG_COMPAT_NET_DEV_OPS=y
- CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
-@@ -218,7 +260,7 @@ CONFIG_IP_PNP=y
- # CONFIG_IP_PNP_BOOTP is not set
- # CONFIG_IP_PNP_RARP is not set
- # CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+# CONFIG_NET_IPGRE_DEMUX is not set
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
- CONFIG_INET_AH=y
-@@ -238,11 +280,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
-+# CONFIG_RDS is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
-+# CONFIG_L2TP is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_NET_DSA is not set
- # CONFIG_VLAN_8021Q is not set
-@@ -254,29 +299,61 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
-+# CONFIG_PHONET is not set
-+# CONFIG_IEEE802154 is not set
- # CONFIG_NET_SCHED is not set
- # CONFIG_DCB is not set
-+# CONFIG_BATMAN_ADV is not set
-
- #
- # Network testing
- #
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_HAMRADIO is not set
--# CONFIG_CAN is not set
-+CONFIG_CAN=y
-+CONFIG_CAN_RAW=y
-+# CONFIG_CAN_BCM is not set
-+
-+#
-+# CAN Device Drivers
-+#
-+# CONFIG_CAN_VCAN is not set
-+# CONFIG_CAN_SLCAN is not set
-+CONFIG_CAN_DEV=y
-+CONFIG_CAN_CALC_BITTIMING=y
-+# CONFIG_CAN_MCP251X is not set
-+CONFIG_HAVE_CAN_FLEXCAN=y
-+CONFIG_CAN_FLEXCAN=y
-+CONFIG_FLEXCAN_NORXFIFO=y
-+# CONFIG_CAN_MSCAN is not set
-+# CONFIG_CAN_SJA1000 is not set
-+
-+#
-+# CAN USB interfaces
-+#
-+# CONFIG_CAN_EMS_USB is not set
-+# CONFIG_CAN_ESD_USB2 is not set
-+# CONFIG_CAN_SOFTING is not set
-+# CONFIG_CAN_DEBUG_DEVICES is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
--# CONFIG_PHONET is not set
- CONFIG_WIRELESS=y
- # CONFIG_CFG80211 is not set
--CONFIG_WIRELESS_OLD_REGULATORY=y
--# CONFIG_WIRELESS_EXT is not set
- # CONFIG_LIB80211 is not set
--# CONFIG_MAC80211 is not set
-+
-+#
-+# CFG80211 needs to be enabled for MAC80211
-+#
-+
-+#
-+# Some wireless drivers require a rate control algorithm
-+#
- # CONFIG_WIMAX is not set
- # CONFIG_RFKILL is not set
- # CONFIG_NET_9P is not set
--# CONFIG_KLIPS is not set
-+# CONFIG_CAIF is not set
-+# CONFIG_CEPH_LIB is not set
-
- #
- # Device Drivers
-@@ -286,6 +363,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
- # Generic Driver Options
- #
- CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_DEVTMPFS is not set
- # CONFIG_STANDALONE is not set
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- CONFIG_FW_LOADER=y
-@@ -295,9 +373,9 @@ CONFIG_EXTRA_FIRMWARE=""
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_CONCAT is not set
- CONFIG_MTD_PARTITIONS=y
--# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_REDBOOT_PARTS is not set
- CONFIG_MTD_CMDLINE_PARTS=y
- # CONFIG_MTD_AR7_PARTS is not set
-@@ -313,6 +391,7 @@ CONFIG_MTD_BLOCK=y
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_SM_FTL is not set
- # CONFIG_MTD_OOPS is not set
-
- #
-@@ -346,6 +425,7 @@ CONFIG_MTD_CFI_I2=y
- # CONFIG_MTD_DATAFLASH is not set
- CONFIG_MTD_M25P80=y
- CONFIG_M25PXX_USE_FAST_READ=y
-+# CONFIG_MTD_SST25L is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -357,9 +437,11 @@ CONFIG_MTD_BLOCK2MTD=y
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND_ECC=y
-+# CONFIG_MTD_NAND_ECC_SMC is not set
- CONFIG_MTD_NAND=y
- # CONFIG_MTD_NAND_VERIFY_WRITE is not set
--# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_SM_COMMON is not set
- # CONFIG_MTD_NAND_MUSEUM_IDS is not set
- CONFIG_MTD_NAND_IDS=y
- # CONFIG_MTD_NAND_DISKONCHIP is not set
-@@ -367,22 +449,23 @@ CONFIG_MTD_NAND_IDS=y
- # CONFIG_MTD_NAND_PLATFORM is not set
- # CONFIG_MTD_ALAUDA is not set
- CONFIG_MTD_NAND_FSL_NFC=y
-+CONFIG_MTD_NAND_FSL_NFC_SWECC=y
- # CONFIG_MTD_ONENAND is not set
-
- #
- # LPDDR flash memory drivers
- #
- # CONFIG_MTD_LPDDR is not set
--
--#
--# UBI - Unsorted block images
--#
- # CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+
-+#
-+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-+#
- # CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_UB is not set
- CONFIG_BLK_DEV_RAM=y
-@@ -392,6 +475,7 @@ CONFIG_BLK_DEV_RAM_SIZE=64000
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- # CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_RBD is not set
- # CONFIG_MISC_DEVICES is not set
- CONFIG_HAVE_IDE=y
- # CONFIG_IDE is not set
-@@ -399,6 +483,7 @@ CONFIG_HAVE_IDE=y
- #
- # SCSI device support
- #
-+CONFIG_SCSI_MOD=y
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
- CONFIG_SCSI_DMA=y
-@@ -415,10 +500,6 @@ CONFIG_BLK_DEV_SD=y
- # CONFIG_BLK_DEV_SR is not set
- # CONFIG_CHR_DEV_SG is not set
- # CONFIG_CHR_DEV_SCH is not set
--
--#
--# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
--#
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-@@ -431,15 +512,20 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
- # CONFIG_SCSI_SRP_ATTRS is not set
- CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_ISCSI_TCP is not set
-+# CONFIG_ISCSI_BOOT_SYSFS is not set
- # CONFIG_LIBFC is not set
-+# CONFIG_LIBFCOE is not set
- # CONFIG_SCSI_DEBUG is not set
- # CONFIG_SCSI_DH is not set
-+# CONFIG_SCSI_OSD_INITIATOR is not set
- # CONFIG_ATA is not set
- # CONFIG_MD is not set
-+# CONFIG_TARGET_CORE is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-@@ -447,6 +533,7 @@ CONFIG_NETDEVICES=y
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
- # CONFIG_VETH is not set
-+CONFIG_MII=y
- CONFIG_PHYLIB=y
-
- #
-@@ -461,19 +548,21 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- # CONFIG_BROADCOM5222_PHY is not set
-+# CONFIG_BCM63XX_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
- # CONFIG_REALTEK_PHY is not set
- # CONFIG_NATIONAL_PHY is not set
- CONFIG_NATIONAL8364x_PHY=y
- CONFIG_NATIONAL8384x_PHY=y
--CONFIG_MicrelKSZ8041_PHY=y
- # CONFIG_STE10XP is not set
- # CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_MICREL_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_SMC91X is not set
- # CONFIG_ENC28J60 is not set
-+# CONFIG_ETHOC is not set
- # CONFIG_DNET is not set
- # CONFIG_IBM_NEW_EMAC_ZMII is not set
- # CONFIG_IBM_NEW_EMAC_RGMII is not set
-@@ -483,19 +572,16 @@ CONFIG_MII=y
- # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
- # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
- # CONFIG_B44 is not set
-+# CONFIG_KS8851 is not set
-+# CONFIG_KS8851_MLL is not set
- CONFIG_FEC=y
- CONFIG_FEC2=y
--CONFIG_FEC_SHARED_PHY=y
--# CONFIG_MODELO_SWITCH is not set
-+# CONFIG_FEC_1588 is not set
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
--
--#
--# Wireless LAN
--#
--# CONFIG_WLAN_PRE80211 is not set
--# CONFIG_WLAN_80211 is not set
--# CONFIG_IWLWIFI_LEDS is not set
-+CONFIG_WLAN=y
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-
- #
- # Enable WiMAX (Networking options) to see the WiMAX drivers
-@@ -509,7 +595,12 @@ CONFIG_FEC_SHARED_PHY=y
- # CONFIG_USB_PEGASUS is not set
- # CONFIG_USB_RTL8150 is not set
- # CONFIG_USB_USBNET is not set
-+# CONFIG_USB_IPHETH is not set
- # CONFIG_WAN is not set
-+
-+#
-+# CAIF transport drivers
-+#
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
- # CONFIG_NETCONSOLE is not set
-@@ -524,6 +615,7 @@ CONFIG_FEC_SHARED_PHY=y
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- # CONFIG_INPUT_POLLDEV is not set
-+# CONFIG_INPUT_SPARSEKMAP is not set
-
- #
- # Userland interfaces
-@@ -541,11 +633,12 @@ CONFIG_INPUT_EVDEV=y
- #
- CONFIG_INPUT_KEYBOARD=y
- # CONFIG_KEYBOARD_ATKBD is not set
--# CONFIG_KEYBOARD_SUNKBD is not set
- # CONFIG_KEYBOARD_LKKBD is not set
--# CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_OPENCORES is not set
- # CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
- # CONFIG_INPUT_TABLET is not set
-@@ -559,6 +652,8 @@ CONFIG_SERIO=y
- CONFIG_SERIO_SERPORT=y
- # CONFIG_SERIO_LIBPS2 is not set
- # CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO_ALTERA_PS2 is not set
-+# CONFIG_SERIO_PS2MULT is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -571,6 +666,7 @@ CONFIG_HW_CONSOLE=y
- # CONFIG_VT_HW_CONSOLE_BINDING is not set
- CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_N_GSM is not set
-
- #
- # Serial drivers
-@@ -580,6 +676,8 @@ CONFIG_DEVKMEM=y
- #
- # Non-8250 serial port support
- #
-+# CONFIG_SERIAL_MAX3100 is not set
-+# CONFIG_SERIAL_MAX3107 is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- # CONFIG_SERIAL_COLDFIRE_IRDA is not set
-@@ -597,14 +695,19 @@ CONFIG_SERIAL_MCF_UART0=y
- # CONFIG_SERIAL_MCF_UART7 is not set
- # CONFIG_SERIAL_MCF_UART8 is not set
- # CONFIG_SERIAL_MCF_UART9 is not set
-+# CONFIG_SERIAL_TIMBERDALE is not set
-+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-+# CONFIG_SERIAL_ALTERA_UART is not set
- CONFIG_UNIX98_PTYS=y
- # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
- # CONFIG_LEGACY_PTYS is not set
-+# CONFIG_TTY_PRINTK is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-+# CONFIG_RAMOOPS is not set
- # CONFIG_I2C is not set
- CONFIG_SPI=y
- CONFIG_SPI_MASTER=y
-@@ -614,18 +717,32 @@ CONFIG_SPI_MASTER=y
- #
- # CONFIG_SPI_BITBANG is not set
- CONFIG_SPI_DSPI=y
-+CONFIG_DSPI0=y
-+CONFIG_DSP0_SBF_CS=1
-+# CONFIG_DSPI1 is not set
- # CONFIG_SPI_COLDFIRE_DSPI_EDMA is not set
-+# CONFIG_SPI_PXA2XX_PCI is not set
-+# CONFIG_SPI_XILINX is not set
-+# CONFIG_SPI_DESIGNWARE is not set
-
- #
- # SPI Protocol Masters
- #
- # CONFIG_SPI_SPIDEV is not set
- # CONFIG_SPI_TLE62X0 is not set
-+
-+#
-+# PPS support
-+#
-+# CONFIG_PPS is not set
-+
-+#
-+# PPS generators support
-+#
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
- # CONFIG_THERMAL is not set
--# CONFIG_THERMAL_HWMON is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -645,36 +762,20 @@ CONFIG_SSB_POSSIBLE=y
- # Sonics Silicon Backplane
- #
- # CONFIG_SSB is not set
--
--#
--# Multifunction device drivers
--#
-+CONFIG_MFD_SUPPORT=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
- # CONFIG_MFD_TMIO is not set
-+# CONFIG_MFD_MC13XXX is not set
-+# CONFIG_ABX500_CORE is not set
- # CONFIG_REGULATOR is not set
--
--#
--# Multimedia devices
--#
--
--#
--# Multimedia core support
--#
--# CONFIG_VIDEO_DEV is not set
--# CONFIG_DVB_CORE is not set
--# CONFIG_VIDEO_MEDIA is not set
--
--#
--# Multimedia drivers
--#
--CONFIG_DAB=y
--# CONFIG_USB_DABUSB is not set
-+# CONFIG_MEDIA_SUPPORT is not set
-
- #
- # Graphics support
- #
-+# CONFIG_DRM is not set
- # CONFIG_VGASTATE is not set
- CONFIG_VIDEO_OUTPUT_CONTROL=m
- # CONFIG_FB is not set
-@@ -705,7 +806,6 @@ CONFIG_USB=y
- CONFIG_USB_DEVICEFS=y
- CONFIG_USB_DEVICE_CLASS=y
- # CONFIG_USB_DYNAMIC_MINORS is not set
--CONFIG_USB_SUSPEND=y
- CONFIG_USB_OTG=y
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-@@ -723,16 +823,18 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y
- CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
- CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
- CONFIG_USB_EHCI_FSL=y
-+# CONFIG_USB_M5441X_PLLCLK is not set
-+# CONFIG_USB_M5441X_H1 is not set
-+CONFIG_USB_M5441X_ULPI=y
-+# CONFIG_USB_M5441X_FSLS is not set
-+# CONFIG_USB_M5441X_MAX3353_FSLS is not set
- # CONFIG_USB_OXU210HP_HCD is not set
- # CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_ISP1362_HCD is not set
- # CONFIG_USB_SL811_HCD is not set
- # CONFIG_USB_R8A66597_HCD is not set
- # CONFIG_USB_HWA_HCD is not set
--# CONFIG_USB_M5445X_ULPI is not set
--# CONFIG_USB_M5445X_FSLS is not set
--CONFIG_USB_M5441X_ULPI=y
--# CONFIG_USB_M5441X_FSLS is not set
--# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # USB Device Class drivers
-@@ -743,11 +845,11 @@ CONFIG_USB_M5441X_ULPI=y
- # CONFIG_USB_TMC is not set
-
- #
--# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
- #
-
- #
--# see USB_STORAGE Help for more information
-+# also be needed; see USB_STORAGE Help for more info
- #
- CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_DEBUG is not set
-@@ -762,6 +864,7 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_ONETOUCH is not set
- # CONFIG_USB_STORAGE_KARMA is not set
- # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_UAS is not set
- # CONFIG_USB_LIBUSUAL is not set
-
- #
-@@ -785,11 +888,9 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
--# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
- # CONFIG_USB_FTDI_ELAN is not set
- # CONFIG_USB_APPLEDISPLAY is not set
-@@ -799,50 +900,47 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
- # CONFIG_USB_ISIGHTFW is not set
--# CONFIG_USB_VST is not set
-+# CONFIG_USB_YUREX is not set
- CONFIG_USB_GADGET=m
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_VBUS_DRAW=2
- CONFIG_USB_GADGET_SELECTED=y
--# CONFIG_USB_GADGET_AT91 is not set
--# CONFIG_USB_GADGET_ATMEL_USBA is not set
- CONFIG_USB_GADGET_FSL_USB2=y
- CONFIG_USB_FSL_USB2=m
--# CONFIG_USB_GADGET_LH7A40X is not set
--# CONFIG_USB_GADGET_OMAP is not set
--# CONFIG_USB_GADGET_PXA25X is not set
--# CONFIG_USB_GADGET_PXA27X is not set
--# CONFIG_USB_GADGET_S3C2410 is not set
--# CONFIG_USB_GADGET_IMX is not set
-+# CONFIG_USB_GADGET_R8A66597 is not set
-+# CONFIG_USB_GADGET_PXA_U2O is not set
- # CONFIG_USB_GADGET_M66592 is not set
--# CONFIG_USB_GADGET_AMD5536UDC is not set
--# CONFIG_USB_GADGET_FSL_QE is not set
--# CONFIG_USB_GADGET_CI13XXX is not set
--# CONFIG_USB_GADGET_NET2280 is not set
--# CONFIG_USB_GADGET_GOKU is not set
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
- CONFIG_USB_GADGET_DUALSPEED=y
- # CONFIG_USB_ZERO is not set
- # CONFIG_USB_ETH is not set
-+# CONFIG_USB_G_NCM is not set
- CONFIG_USB_GADGETFS=m
-+# CONFIG_USB_FUNCTIONFS is not set
- CONFIG_USB_FILE_STORAGE=m
- CONFIG_USB_FILE_STORAGE_TEST=y
-+# CONFIG_USB_MASS_STORAGE is not set
- # CONFIG_USB_G_SERIAL is not set
--# CONFIG_USB_MIDI_GADGET is not set
- # CONFIG_USB_G_PRINTER is not set
- # CONFIG_USB_CDC_COMPOSITE is not set
-+# CONFIG_USB_G_MULTI is not set
-+# CONFIG_USB_G_HID is not set
-+# CONFIG_USB_G_DBGP is not set
-
- #
- # OTG and related infrastructure
- #
-+# CONFIG_NOP_USB_XCEIV is not set
- CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
-+# CONFIG_MMC_CLKGATE is not set
-
- #
- # MMC/SD/SDIO Card Drivers
- #
- CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_MINORS=8
- CONFIG_MMC_BLOCK_BOUNCE=y
- # CONFIG_SDIO_UART is not set
- # CONFIG_MMC_TEST is not set
-@@ -853,8 +951,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y
- # CONFIG_MMC_SDHCI is not set
- # CONFIG_MMC_SPI is not set
- # CONFIG_MMC_ESDHC is not set
-+# CONFIG_MMC_USHC is not set
- # CONFIG_MEMSTICK is not set
- # CONFIG_NEW_LEDS is not set
-+# CONFIG_NFC_DEVICES is not set
- # CONFIG_ACCESSIBILITY is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
-@@ -881,6 +981,7 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_R9701 is not set
- # CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_DS3234 is not set
-+# CONFIG_RTC_DRV_PCF2123 is not set
-
- #
- # Platform RTC drivers
-@@ -893,21 +994,27 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T35 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_MSM6242 is not set
- # CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_RP5C01 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-
- #
- # on-CPU RTC drivers
- #
-+# CONFIG_RTC_DRV_GENERIC is not set
- # CONFIG_RTC_MCF is not set
- CONFIG_RTC_M5441X=y
- CONFIG_DMADEVICES=y
-+# CONFIG_DMADEVICES_DEBUG is not set
-
- #
- # DMA Devices
- #
- CONFIG_COLDFIRE_EDMA=y
- CONFIG_COLDFIRE_EDMA_TEST=m
-+# CONFIG_TIMB_DMA is not set
-+# CONFIG_AUXDISPLAY is not set
- # CONFIG_UIO is not set
- # CONFIG_STAGING is not set
-
-@@ -926,6 +1033,7 @@ CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
-+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
- CONFIG_EXT3_FS_XATTR=y
- # CONFIG_EXT3_FS_POSIX_ACL is not set
- # CONFIG_EXT3_FS_SECURITY is not set
-@@ -934,21 +1042,27 @@ CONFIG_JBD=y
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--# CONFIG_FS_POSIX_ACL is not set
--CONFIG_FILE_LOCKING=y
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
--# CONFIG_OCFS2_FS is not set
- # CONFIG_BTRFS_FS is not set
-+# CONFIG_NILFS2_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+CONFIG_FSNOTIFY=y
- CONFIG_DNOTIFY=y
--CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
-+# CONFIG_FANOTIFY is not set
- # CONFIG_QUOTA is not set
--# CONFIG_AUTOFS_FS is not set
-+# CONFIG_QUOTACTL is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-
- #
-+# Caches
-+#
-+# CONFIG_FSCACHE is not set
-+
-+#
- # CD-ROM/DVD Filesystems
- #
- # CONFIG_ISO9660_FS is not set
-@@ -986,6 +1100,7 @@ CONFIG_MISC_FILESYSTEMS=y
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
-+# CONFIG_YAFFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
- CONFIG_JFFS2_FS_WRITEBUFFER=y
-@@ -997,6 +1112,7 @@ CONFIG_JFFS2_ZLIB=y
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_LOGFS is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_SQUASHFS is not set
- # CONFIG_VXFS_FS is not set
-@@ -1016,10 +1132,8 @@ CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
--# CONFIG_SUNRPC_REGISTER_V4 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
--# CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
-+# CONFIG_CEPH_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-@@ -1086,7 +1200,6 @@ CONFIG_NLS_ISO8859_1=y
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=y
--# CONFIG_DLM is not set
-
- #
- # Kernel hacking
-@@ -1096,19 +1209,18 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
- # CONFIG_ENABLE_MUST_CHECK is not set
- CONFIG_FRAME_WARN=1024
- # CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_STRIP_ASM_SYMS is not set
- # CONFIG_UNUSED_SYMBOLS is not set
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- # CONFIG_DEBUG_KERNEL is not set
--# CONFIG_DEBUG_BUGVERBOSE is not set
-+# CONFIG_HARDLOCKUP_DETECTOR is not set
-+CONFIG_BKL=y
-+# CONFIG_SPARSE_RCU_POINTER is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_MEMORY_INIT is not set
--# CONFIG_RCU_CPU_STALL_DETECTOR is not set
- # CONFIG_SYSCTL_SYSCALL_CHECK is not set
--
--#
--# Tracers
--#
--# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_ATOMIC64_SELFTEST is not set
- # CONFIG_SAMPLES is not set
- # CONFIG_BOOTPARAM is not set
-
-@@ -1116,15 +1228,16 @@ CONFIG_FRAME_WARN=1024
- # Security options
- #
- # CONFIG_KEYS is not set
-+# CONFIG_SECURITY_DMESG_RESTRICT is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITYFS is not set
--# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_DEFAULT_SECURITY_DAC=y
-+CONFIG_DEFAULT_SECURITY=""
- CONFIG_CRYPTO=y
-
- #
- # Crypto core or helper
- #
--# CONFIG_CRYPTO_FIPS is not set
- CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_ALGAPI2=y
- CONFIG_CRYPTO_AEAD=y
-@@ -1134,10 +1247,13 @@ CONFIG_CRYPTO_BLKCIPHER2=y
- CONFIG_CRYPTO_HASH=y
- CONFIG_CRYPTO_HASH2=y
- CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_PCOMP2=y
- CONFIG_CRYPTO_MANAGER=y
- CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
- # CONFIG_CRYPTO_GF128MUL is not set
- # CONFIG_CRYPTO_NULL is not set
-+CONFIG_CRYPTO_WORKQUEUE=y
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_AUTHENC=y
- CONFIG_CRYPTO_TEST=m
-@@ -1165,11 +1281,13 @@ CONFIG_CRYPTO_PCBC=m
- #
- CONFIG_CRYPTO_HMAC=y
- # CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_VMAC is not set
-
- #
- # Digest
- #
- CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_GHASH is not set
- # CONFIG_CRYPTO_MD4 is not set
- CONFIG_CRYPTO_MD5=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
-@@ -1186,7 +1304,7 @@ CONFIG_CRYPTO_SHA1=y
- #
- # Ciphers
- #
--# CONFIG_CRYPTO_AES is not set
-+CONFIG_CRYPTO_AES=y
- # CONFIG_CRYPTO_ANUBIS is not set
- # CONFIG_CRYPTO_ARC4 is not set
- # CONFIG_CRYPTO_BLOWFISH is not set
-@@ -1206,23 +1324,22 @@ CONFIG_CRYPTO_DES=y
- # Compression
- #
- # CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_ZLIB is not set
- # CONFIG_CRYPTO_LZO is not set
-
- #
- # Random Number Generation
- #
- # CONFIG_CRYPTO_ANSI_CPRNG is not set
--
--#
--# OCF Configuration
--#
--# CONFIG_OCF_OCF is not set
--
--#
--# Talitos Driver
--#
-+# CONFIG_CRYPTO_USER_API_HASH is not set
-+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
- CONFIG_CRYPTO_HW=y
--# CONFIG_CRYPTO_DEV_MCFCAU is not set
-+CONFIG_CRYPTO_DEV_MCFCAU=y
-+CONFIG_CRYPTO_DEV_MCFCAU_DES=y
-+CONFIG_CRYPTO_DEV_MCFCAU_AES=y
-+CONFIG_CRYPTO_DEV_MCFCAU_MD5=y
-+CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y
-+# CONFIG_BINARY_PRINTF is not set
-
- #
- # Library routines
-@@ -1238,7 +1355,12 @@ CONFIG_CRC7=y
- CONFIG_LIBCRC32C=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
--CONFIG_PLIST=y
-+# CONFIG_XZ_DEC is not set
-+# CONFIG_XZ_DEC_BCJ is not set
-+CONFIG_DECOMPRESS_GZIP=y
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
-+CONFIG_NLATTR=y
-+CONFIG_GENERIC_ATOMIC64=y
---- a/arch/m68k/configs/m54451evb_defconfig
-+++ b/arch/m68k/configs/m54451evb_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.29
--# Tue Aug 24 16:14:20 2010
-+# Linux kernel version: 2.6.38
-+# Tue Aug 2 16:20:36 2011
- #
- CONFIG_M68K=y
- CONFIG_MMU=y
-@@ -17,7 +17,9 @@ CONFIG_GENERIC_IOMAP=y
- # CONFIG_NO_IOPORT is not set
- # CONFIG_NO_DMA is not set
- CONFIG_HZ=100
-+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+CONFIG_CONSTRUCTORS=y
-
- #
- # General setup
-@@ -25,6 +27,7 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNA
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_CROSS_COMPILE=""
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- CONFIG_SWAP=y
-@@ -34,38 +37,40 @@ CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_AUDIT is not set
-+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-
- #
- # RCU Subsystem
- #
--CONFIG_CLASSIC_RCU=y
--# CONFIG_TREE_RCU is not set
-+CONFIG_TINY_RCU=y
- # CONFIG_PREEMPT_RCU is not set
-+# CONFIG_RCU_TRACE is not set
- # CONFIG_TREE_RCU_TRACE is not set
--# CONFIG_PREEMPT_RCU_TRACE is not set
- CONFIG_IKCONFIG=y
- CONFIG_IKCONFIG_PROC=y
- CONFIG_LOG_BUF_SHIFT=17
--CONFIG_GROUP_SCHED=y
--CONFIG_FAIR_GROUP_SCHED=y
--# CONFIG_RT_GROUP_SCHED is not set
--CONFIG_USER_SCHED=y
--# CONFIG_CGROUP_SCHED is not set
- # CONFIG_CGROUPS is not set
--CONFIG_SYSFS_DEPRECATED=y
--CONFIG_SYSFS_DEPRECATED_V2=y
--# CONFIG_RELAY is not set
- CONFIG_NAMESPACES=y
- # CONFIG_UTS_NS is not set
- # CONFIG_IPC_NS is not set
- # CONFIG_USER_NS is not set
- # CONFIG_PID_NS is not set
- # CONFIG_NET_NS is not set
-+# CONFIG_SCHED_AUTOGROUP is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_RD_GZIP=y
-+# CONFIG_RD_BZIP2 is not set
-+# CONFIG_RD_LZMA is not set
-+# CONFIG_RD_XZ is not set
-+# CONFIG_RD_LZO is not set
- # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
- CONFIG_ANON_INODES=y
-+CONFIG_EXPERT=y
- CONFIG_EMBEDDED=y
- CONFIG_UID16=y
- CONFIG_SYSCTL_SYSCALL=y
-@@ -83,12 +88,20 @@ CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_AIO=y
-+
-+#
-+# Kernel Performance Events And Counters
-+#
- CONFIG_VM_EVENT_COUNTERS=y
- CONFIG_COMPAT_BRK=y
- CONFIG_SLAB=y
- # CONFIG_SLUB is not set
- # CONFIG_SLOB is not set
- # CONFIG_PROFILING is not set
-+
-+#
-+# GCOV-based kernel profiling
-+#
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
-@@ -100,8 +113,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_BLOCK=y
--CONFIG_LBD=y
--# CONFIG_BLK_DEV_IO_TRACE is not set
-+CONFIG_LBDAF=y
- # CONFIG_BLK_DEV_BSG is not set
- # CONFIG_BLK_DEV_INTEGRITY is not set
-
-@@ -109,14 +121,41 @@ CONFIG_LBD=y
- # IO Schedulers
- #
- CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
- CONFIG_IOSCHED_DEADLINE=y
- CONFIG_IOSCHED_CFQ=y
--# CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_INLINE_SPIN_TRYLOCK is not set
-+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK is not set
-+# CONFIG_INLINE_SPIN_LOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_SPIN_UNLOCK=y
-+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_READ_TRYLOCK is not set
-+# CONFIG_INLINE_READ_LOCK is not set
-+# CONFIG_INLINE_READ_LOCK_BH is not set
-+# CONFIG_INLINE_READ_LOCK_IRQ is not set
-+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_READ_UNLOCK=y
-+# CONFIG_INLINE_READ_UNLOCK_BH is not set
-+CONFIG_INLINE_READ_UNLOCK_IRQ=y
-+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_WRITE_TRYLOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK_BH is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_WRITE_UNLOCK=y
-+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
- # CONFIG_FREEZER is not set
-
- #
-@@ -170,18 +209,19 @@ CONFIG_SINGLE_MEMORY_CHUNK=y
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
- CONFIG_SELECT_MEMORY_MODEL=y
- CONFIG_FLATMEM_MANUAL=y
--# CONFIG_DISCONTIGMEM_MANUAL is not set
--# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- CONFIG_NEED_MULTIPLE_NODES=y
- CONFIG_PAGEFLAGS_EXTENDED=y
- CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_COMPACTION is not set
- # CONFIG_PHYS_ADDR_T_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
- CONFIG_BOUNCE=y
- CONFIG_VIRT_TO_BUS=y
--CONFIG_UNEVICTABLE_LRU=y
-+# CONFIG_KSM is not set
-+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-+CONFIG_NEED_PER_CPU_KM=y
-
- #
- # General setup
-@@ -204,9 +244,7 @@ CONFIG_NET=y
- #
- # Networking options
- #
--CONFIG_COMPAT_NET_DEV_OPS=y
- CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
-@@ -229,7 +267,7 @@ CONFIG_IP_PNP=y
- # CONFIG_IP_PNP_BOOTP is not set
- # CONFIG_IP_PNP_RARP is not set
- # CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+# CONFIG_NET_IPGRE_DEMUX is not set
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
- CONFIG_INET_AH=y
-@@ -249,11 +287,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
-+# CONFIG_RDS is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
-+# CONFIG_L2TP is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_NET_DSA is not set
- # CONFIG_VLAN_8021Q is not set
-@@ -265,8 +306,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
-+# CONFIG_PHONET is not set
-+# CONFIG_IEEE802154 is not set
- # CONFIG_NET_SCHED is not set
- # CONFIG_DCB is not set
-+# CONFIG_BATMAN_ADV is not set
-
- #
- # Network testing
-@@ -277,17 +321,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
--# CONFIG_PHONET is not set
- CONFIG_WIRELESS=y
- # CONFIG_CFG80211 is not set
--CONFIG_WIRELESS_OLD_REGULATORY=y
--# CONFIG_WIRELESS_EXT is not set
- # CONFIG_LIB80211 is not set
--# CONFIG_MAC80211 is not set
-+
-+#
-+# CFG80211 needs to be enabled for MAC80211
-+#
-+
-+#
-+# Some wireless drivers require a rate control algorithm
-+#
- # CONFIG_WIMAX is not set
- # CONFIG_RFKILL is not set
- # CONFIG_NET_9P is not set
--# CONFIG_KLIPS is not set
-+# CONFIG_CAIF is not set
-+# CONFIG_CEPH_LIB is not set
-
- #
- # Device Drivers
-@@ -297,6 +346,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
- # Generic Driver Options
- #
- CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_DEVTMPFS is not set
- # CONFIG_STANDALONE is not set
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- CONFIG_FW_LOADER=y
-@@ -306,9 +356,9 @@ CONFIG_EXTRA_FIRMWARE=""
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_TESTS is not set
- CONFIG_MTD_CONCAT=y
- CONFIG_MTD_PARTITIONS=y
--# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_REDBOOT_PARTS is not set
- CONFIG_MTD_CMDLINE_PARTS=y
- # CONFIG_MTD_AR7_PARTS is not set
-@@ -324,6 +374,7 @@ CONFIG_MTD_BLOCK=y
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_SM_FTL is not set
- # CONFIG_MTD_OOPS is not set
-
- #
-@@ -372,6 +423,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # CONFIG_MTD_DATAFLASH is not set
- # CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SST25L is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -390,16 +442,16 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- # LPDDR flash memory drivers
- #
- # CONFIG_MTD_LPDDR is not set
--
--#
--# UBI - Unsorted block images
--#
- # CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+
-+#
-+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-+#
- # CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_UB is not set
- CONFIG_BLK_DEV_RAM=y
-@@ -409,9 +461,22 @@ CONFIG_BLK_DEV_RAM_SIZE=64000
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- # CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_RBD is not set
- CONFIG_MISC_DEVICES=y
-+# CONFIG_AD525X_DPOT is not set
- # CONFIG_ICS932S401 is not set
- # CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_APDS9802ALS is not set
-+# CONFIG_ISL29003 is not set
-+# CONFIG_ISL29020 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_SENSORS_BH1780 is not set
-+# CONFIG_SENSORS_BH1770 is not set
-+# CONFIG_SENSORS_APDS990X is not set
-+# CONFIG_HMC6352 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_TI_DAC7512 is not set
-+# CONFIG_BMP085 is not set
- # CONFIG_C2PORT is not set
-
- #
-@@ -420,13 +485,20 @@ CONFIG_MISC_DEVICES=y
- # CONFIG_EEPROM_AT24 is not set
- # CONFIG_EEPROM_AT25 is not set
- # CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_MAX6875 is not set
- # CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_IWMC3200TOP is not set
-+
-+#
-+# Texas Instruments shared transport line discipline
-+#
- CONFIG_HAVE_IDE=y
- # CONFIG_IDE is not set
-
- #
- # SCSI device support
- #
-+CONFIG_SCSI_MOD=y
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
- CONFIG_SCSI_DMA=y
-@@ -443,10 +515,6 @@ CONFIG_BLK_DEV_SD=y
- # CONFIG_BLK_DEV_SR is not set
- # CONFIG_CHR_DEV_SG is not set
- # CONFIG_CHR_DEV_SCH is not set
--
--#
--# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
--#
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-@@ -459,15 +527,20 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
- # CONFIG_SCSI_SRP_ATTRS is not set
- CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_ISCSI_TCP is not set
-+# CONFIG_ISCSI_BOOT_SYSFS is not set
- # CONFIG_LIBFC is not set
-+# CONFIG_LIBFCOE is not set
- # CONFIG_SCSI_DEBUG is not set
- # CONFIG_SCSI_DH is not set
-+# CONFIG_SCSI_OSD_INITIATOR is not set
- # CONFIG_ATA is not set
- # CONFIG_MD is not set
-+# CONFIG_TARGET_CORE is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-@@ -475,6 +548,7 @@ CONFIG_NETDEVICES=y
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
- # CONFIG_VETH is not set
-+CONFIG_MII=y
- CONFIG_PHYLIB=y
-
- #
-@@ -489,19 +563,21 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- # CONFIG_BROADCOM5222_PHY is not set
-+# CONFIG_BCM63XX_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
- # CONFIG_REALTEK_PHY is not set
- # CONFIG_NATIONAL_PHY is not set
- # CONFIG_NATIONAL8364x_PHY is not set
- # CONFIG_NATIONAL8384x_PHY is not set
--CONFIG_MicrelKSZ8041_PHY=y
- # CONFIG_STE10XP is not set
- # CONFIG_LSI_ET1011C_PHY is not set
-+CONFIG_MICREL_PHY=y
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_SMC91X is not set
- # CONFIG_ENC28J60 is not set
-+# CONFIG_ETHOC is not set
- # CONFIG_DNET is not set
- # CONFIG_IBM_NEW_EMAC_ZMII is not set
- # CONFIG_IBM_NEW_EMAC_RGMII is not set
-@@ -511,16 +587,14 @@ CONFIG_MII=y
- # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
- # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
- # CONFIG_B44 is not set
-+# CONFIG_KS8851 is not set
-+# CONFIG_KS8851_MLL is not set
- CONFIG_FEC=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
--
--#
--# Wireless LAN
--#
--# CONFIG_WLAN_PRE80211 is not set
--# CONFIG_WLAN_80211 is not set
--# CONFIG_IWLWIFI_LEDS is not set
-+CONFIG_WLAN=y
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-
- #
- # Enable WiMAX (Networking options) to see the WiMAX drivers
-@@ -531,21 +605,15 @@ CONFIG_FEC=y
- #
- # CONFIG_USB_CATC is not set
- # CONFIG_USB_KAWETH is not set
--CONFIG_USB_PEGASUS=m
--CONFIG_USB_RTL8150=m
--CONFIG_USB_USBNET=m
--CONFIG_USB_NET_AX8817X=m
--CONFIG_USB_NET_CDCETHER=m
--# CONFIG_USB_NET_DM9601 is not set
--# CONFIG_USB_NET_SMSC95XX is not set
--# CONFIG_USB_NET_GL620A is not set
--# CONFIG_USB_NET_NET1080 is not set
--# CONFIG_USB_NET_PLUSB is not set
--# CONFIG_USB_NET_MCS7830 is not set
--# CONFIG_USB_NET_RNDIS_HOST is not set
--# CONFIG_USB_NET_CDC_SUBSET is not set
--# CONFIG_USB_NET_ZAURUS is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_USB_IPHETH is not set
- # CONFIG_WAN is not set
-+
-+#
-+# CAIF transport drivers
-+#
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
- # CONFIG_NETCONSOLE is not set
-@@ -560,6 +628,7 @@ CONFIG_USB_NET_CDCETHER=m
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- # CONFIG_INPUT_POLLDEV is not set
-+# CONFIG_INPUT_SPARSEKMAP is not set
-
- #
- # Userland interfaces
-@@ -576,12 +645,18 @@ CONFIG_INPUT_EVDEV=y
- # Input Device Drivers
- #
- CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ADP5588 is not set
- # CONFIG_KEYBOARD_ATKBD is not set
--# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_QT2160 is not set
- # CONFIG_KEYBOARD_LKKBD is not set
--# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_TCA6416 is not set
-+# CONFIG_KEYBOARD_MAX7359 is not set
-+# CONFIG_KEYBOARD_MCS is not set
- # CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_OPENCORES is not set
- # CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
- # CONFIG_INPUT_TABLET is not set
-@@ -595,6 +670,8 @@ CONFIG_SERIO=y
- CONFIG_SERIO_SERPORT=y
- # CONFIG_SERIO_LIBPS2 is not set
- # CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO_ALTERA_PS2 is not set
-+# CONFIG_SERIO_PS2MULT is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -608,6 +685,7 @@ CONFIG_HW_CONSOLE=y
- CONFIG_DEVKMEM=y
- CONFIG_DEVSRAM=m
- # CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_N_GSM is not set
-
- #
- # Serial drivers
-@@ -617,6 +695,8 @@ CONFIG_DEVSRAM=m
- #
- # Non-8250 serial port support
- #
-+# CONFIG_SERIAL_MAX3100 is not set
-+# CONFIG_SERIAL_MAX3107 is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- # CONFIG_SERIAL_COLDFIRE_IRDA is not set
-@@ -624,17 +704,24 @@ CONFIG_SERIAL_CORE_CONSOLE=y
- CONFIG_SERIAL_MCF=y
- CONFIG_SERIAL_MCF_BAUDRATE=115200
- CONFIG_SERIAL_MCF_CONSOLE=y
-+# CONFIG_SERIAL_TIMBERDALE is not set
-+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-+# CONFIG_SERIAL_ALTERA_UART is not set
- CONFIG_UNIX98_PTYS=y
- # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
- # CONFIG_LEGACY_PTYS is not set
-+# CONFIG_TTY_PRINTK is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-+# CONFIG_RAMOOPS is not set
- CONFIG_I2C=y
- CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_COMPAT=y
- CONFIG_I2C_CHARDEV=y
-+# CONFIG_I2C_MUX is not set
- CONFIG_I2C_HELPER_AUTO=y
-
- #
-@@ -646,7 +733,9 @@ CONFIG_I2C_HELPER_AUTO=y
- #
- CONFIG_I2C_MCF=y
- # CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_XILINX is not set
-
- #
- # External I2C/SMBus adapter drivers
-@@ -658,23 +747,10 @@ CONFIG_I2C_MCF=y
- #
- # Other I2C/SMBus bus drivers
- #
--# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_STUB is not set
--
--#
--# Miscellaneous I2C Chip support
--#
--# CONFIG_DS1682 is not set
--# CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_PCF8575 is not set
--# CONFIG_SENSORS_PCA9539 is not set
--# CONFIG_SENSORS_PCF8591 is not set
--# CONFIG_SENSORS_MAX6875 is not set
--# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
--# CONFIG_I2C_DEBUG_CHIP is not set
- CONFIG_SPI=y
- CONFIG_SPI_MASTER=y
-
-@@ -686,17 +762,28 @@ CONFIG_SPI_DSPI=y
- CONFIG_SPI_COLDFIRE_DSPI_EDMA=y
- # CONFIG_VOIP_FXS is not set
- # CONFIG_VOIP_FXO is not set
-+# CONFIG_SPI_PXA2XX_PCI is not set
-+# CONFIG_SPI_XILINX is not set
-+# CONFIG_SPI_DESIGNWARE is not set
-
- #
- # SPI Protocol Masters
- #
- # CONFIG_SPI_SPIDEV is not set
- # CONFIG_SPI_TLE62X0 is not set
-+
-+#
-+# PPS support
-+#
-+# CONFIG_PPS is not set
-+
-+#
-+# PPS generators support
-+#
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
- # CONFIG_THERMAL is not set
--# CONFIG_THERMAL_HWMON is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -716,40 +803,26 @@ CONFIG_SSB_POSSIBLE=y
- # Sonics Silicon Backplane
- #
- # CONFIG_SSB is not set
--
--#
--# Multifunction device drivers
--#
-+CONFIG_MFD_SUPPORT=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_TPS6507X is not set
- # CONFIG_MFD_TMIO is not set
- # CONFIG_PMIC_DA903X is not set
-+# CONFIG_PMIC_ADP5520 is not set
- # CONFIG_MFD_WM8400 is not set
--# CONFIG_MFD_WM8350_I2C is not set
- # CONFIG_MFD_PCF50633 is not set
-+# CONFIG_MFD_MC13XXX is not set
-+# CONFIG_ABX500_CORE is not set
-+# CONFIG_MFD_WL1273_CORE is not set
- # CONFIG_REGULATOR is not set
--
--#
--# Multimedia devices
--#
--
--#
--# Multimedia core support
--#
--# CONFIG_VIDEO_DEV is not set
--# CONFIG_DVB_CORE is not set
--# CONFIG_VIDEO_MEDIA is not set
--
--#
--# Multimedia drivers
--#
--CONFIG_DAB=y
--# CONFIG_USB_DABUSB is not set
-+# CONFIG_MEDIA_SUPPORT is not set
-
- #
- # Graphics support
- #
-+# CONFIG_DRM is not set
- # CONFIG_VGASTATE is not set
- CONFIG_VIDEO_OUTPUT_CONTROL=m
- # CONFIG_FB is not set
-@@ -766,6 +839,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
- CONFIG_DUMMY_CONSOLE=y
- CONFIG_SOUND=y
- CONFIG_SOUND_OSS_CORE=y
-+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
- CONFIG_SND=y
- CONFIG_SND_TIMER=y
- CONFIG_SND_PCM=y
-@@ -780,8 +854,14 @@ CONFIG_SND_SUPPORT_OLD_API=y
- CONFIG_SND_VERBOSE_PROCFS=y
- # CONFIG_SND_VERBOSE_PRINTK is not set
- # CONFIG_SND_DEBUG is not set
-+# CONFIG_SND_RAWMIDI_SEQ is not set
-+# CONFIG_SND_OPL3_LIB_SEQ is not set
-+# CONFIG_SND_OPL4_LIB_SEQ is not set
-+# CONFIG_SND_SBAWE_SEQ is not set
-+# CONFIG_SND_EMU10K1_SEQ is not set
- CONFIG_SND_DRIVERS=y
- # CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_ALOOP is not set
- # CONFIG_SND_MTPAV is not set
- # CONFIG_SND_SERIAL_U16550 is not set
- # CONFIG_SND_MPU401 is not set
-@@ -793,12 +873,12 @@ CONFIG_SND_COLDFIRE=y
- CONFIG_SND_SPI=y
- CONFIG_SND_USB=y
- # CONFIG_SND_USB_AUDIO is not set
-+# CONFIG_SND_USB_UA101 is not set
- # CONFIG_SND_USB_CAIAQ is not set
- # CONFIG_SND_SOC is not set
- # CONFIG_SOUND_PRIME is not set
- CONFIG_HID_SUPPORT=y
- CONFIG_HID=y
--# CONFIG_HID_DEBUG is not set
- # CONFIG_HIDRAW is not set
-
- #
-@@ -811,43 +891,65 @@ CONFIG_USB_HID=y
- #
- # Special HID drivers
- #
--CONFIG_HID_COMPAT=y
-+# CONFIG_HID_3M_PCT is not set
- # CONFIG_HID_A4TECH is not set
-+# CONFIG_HID_ACRUX_FF is not set
- # CONFIG_HID_APPLE is not set
- # CONFIG_HID_BELKIN is not set
-+# CONFIG_HID_CANDO is not set
- # CONFIG_HID_CHERRY is not set
- # CONFIG_HID_CHICONY is not set
-+# CONFIG_HID_PRODIKEYS is not set
- # CONFIG_HID_CYPRESS is not set
-+# CONFIG_HID_DRAGONRISE is not set
-+# CONFIG_HID_EMS_FF is not set
-+# CONFIG_HID_EGALAX is not set
- # CONFIG_HID_EZKEY is not set
-+# CONFIG_HID_KYE is not set
-+# CONFIG_HID_UCLOGIC is not set
-+# CONFIG_HID_WALTOP is not set
- # CONFIG_HID_GYRATION is not set
-+# CONFIG_HID_TWINHAN is not set
-+# CONFIG_HID_KENSINGTON is not set
- # CONFIG_HID_LOGITECH is not set
- # CONFIG_HID_MICROSOFT is not set
-+# CONFIG_HID_MOSART is not set
- # CONFIG_HID_MONTEREY is not set
-+# CONFIG_HID_MULTITOUCH is not set
- # CONFIG_HID_NTRIG is not set
-+# CONFIG_HID_ORTEK is not set
- # CONFIG_HID_PANTHERLORD is not set
- # CONFIG_HID_PETALYNX is not set
-+# CONFIG_HID_PICOLCD is not set
-+# CONFIG_HID_QUANTA is not set
-+# CONFIG_HID_ROCCAT is not set
-+# CONFIG_HID_ROCCAT_KONE is not set
-+# CONFIG_HID_ROCCAT_KONEPLUS is not set
-+# CONFIG_HID_ROCCAT_PYRA is not set
- # CONFIG_HID_SAMSUNG is not set
- # CONFIG_HID_SONY is not set
-+# CONFIG_HID_STANTUM is not set
- # CONFIG_HID_SUNPLUS is not set
--# CONFIG_GREENASIA_FF is not set
-+# CONFIG_HID_GREENASIA is not set
-+# CONFIG_HID_SMARTJOYPLUS is not set
- # CONFIG_HID_TOPSEED is not set
--# CONFIG_THRUSTMASTER_FF is not set
--# CONFIG_ZEROPLUS_FF is not set
-+# CONFIG_HID_THRUSTMASTER is not set
-+# CONFIG_HID_ZEROPLUS is not set
-+# CONFIG_HID_ZYDACRON is not set
- CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- # CONFIG_USB_ARCH_HAS_OHCI is not set
- CONFIG_USB_ARCH_HAS_EHCI=y
- CONFIG_USB=y
- # CONFIG_USB_DEBUG is not set
--CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
- #
- # Miscellaneous USB options
- #
--CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DEVICEFS is not set
-+CONFIG_USB_DEVICE_CLASS=y
- # CONFIG_USB_DYNAMIC_MINORS is not set
--CONFIG_USB_SUSPEND=y
- CONFIG_USB_OTG=y
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-@@ -861,20 +963,18 @@ CONFIG_USB_OTG=y
- # CONFIG_USB_C67X00_HCD is not set
- CONFIG_USB_EHCI_HCD=m
- CONFIG_USB_EHCI_ROOT_HUB_TT=y
--# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_TT_NEWSCHED=y
- CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
- CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
- CONFIG_USB_EHCI_FSL=y
-+CONFIG_USB_M5445X_ULPI=y
- # CONFIG_USB_OXU210HP_HCD is not set
- # CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_ISP1362_HCD is not set
- # CONFIG_USB_SL811_HCD is not set
- # CONFIG_USB_R8A66597_HCD is not set
- # CONFIG_USB_HWA_HCD is not set
--CONFIG_USB_M5445X_ULPI=y
--# CONFIG_USB_M5445X_FSLS is not set
--# CONFIG_USB_M5441X_ULPI is not set
--# CONFIG_USB_M5441X_FSLS is not set
--# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # USB Device Class drivers
-@@ -885,11 +985,11 @@ CONFIG_USB_M5445X_ULPI=y
- # CONFIG_USB_TMC is not set
-
- #
--# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
- #
-
- #
--# see USB_STORAGE Help for more information
-+# also be needed; see USB_STORAGE Help for more info
- #
- CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_DEBUG is not set
-@@ -904,6 +1004,7 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_ONETOUCH is not set
- # CONFIG_USB_STORAGE_KARMA is not set
- # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_UAS is not set
- # CONFIG_USB_LIBUSUAL is not set
-
- #
-@@ -927,11 +1028,9 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
--# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
- # CONFIG_USB_FTDI_ELAN is not set
- # CONFIG_USB_APPLEDISPLAY is not set
-@@ -941,51 +1040,51 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
- # CONFIG_USB_ISIGHTFW is not set
--# CONFIG_USB_VST is not set
-+# CONFIG_USB_YUREX is not set
- CONFIG_USB_GADGET=m
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_VBUS_DRAW=2
- CONFIG_USB_GADGET_SELECTED=y
--# CONFIG_USB_GADGET_AT91 is not set
--# CONFIG_USB_GADGET_ATMEL_USBA is not set
--CONFIG_USB_GADGET_FSL_USB2=y
--CONFIG_USB_FSL_USB2=m
--# CONFIG_USB_GADGET_LH7A40X is not set
--# CONFIG_USB_GADGET_OMAP is not set
--# CONFIG_USB_GADGET_PXA25X is not set
--# CONFIG_USB_GADGET_PXA27X is not set
--# CONFIG_USB_GADGET_S3C2410 is not set
--# CONFIG_USB_GADGET_IMX is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+CONFIG_USB_GADGET_R8A66597=y
-+CONFIG_USB_R8A66597=m
-+# CONFIG_USB_GADGET_PXA_U2O is not set
- # CONFIG_USB_GADGET_M66592 is not set
--# CONFIG_USB_GADGET_AMD5536UDC is not set
--# CONFIG_USB_GADGET_FSL_QE is not set
--# CONFIG_USB_GADGET_CI13XXX is not set
--# CONFIG_USB_GADGET_NET2280 is not set
--# CONFIG_USB_GADGET_GOKU is not set
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
- CONFIG_USB_GADGET_DUALSPEED=y
- # CONFIG_USB_ZERO is not set
-+# CONFIG_USB_AUDIO is not set
- CONFIG_USB_ETH=m
- CONFIG_USB_ETH_RNDIS=y
-+# CONFIG_USB_ETH_EEM is not set
-+# CONFIG_USB_G_NCM is not set
- # CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FUNCTIONFS is not set
- CONFIG_USB_FILE_STORAGE=m
- # CONFIG_USB_FILE_STORAGE_TEST is not set
-+# CONFIG_USB_MASS_STORAGE is not set
- # CONFIG_USB_G_SERIAL is not set
- # CONFIG_USB_MIDI_GADGET is not set
- # CONFIG_USB_G_PRINTER is not set
- # CONFIG_USB_CDC_COMPOSITE is not set
-+# CONFIG_USB_G_MULTI is not set
-+# CONFIG_USB_G_HID is not set
-+# CONFIG_USB_G_DBGP is not set
-
- #
- # OTG and related infrastructure
- #
-+# CONFIG_NOP_USB_XCEIV is not set
- CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
-+# CONFIG_MMC_CLKGATE is not set
-
- #
- # MMC/SD/SDIO Card Drivers
- #
- CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_MINORS=8
- CONFIG_MMC_BLOCK_BOUNCE=y
- CONFIG_SDIO_UART=y
- # CONFIG_MMC_TEST is not set
-@@ -996,8 +1095,10 @@ CONFIG_SDIO_UART=y
- # CONFIG_MMC_SDHCI is not set
- CONFIG_MMC_SPI=y
- CONFIG_M54451_SD_HW_DETECT=y
-+# CONFIG_MMC_USHC is not set
- # CONFIG_MEMSTICK is not set
- # CONFIG_NEW_LEDS is not set
-+# CONFIG_NFC_DEVICES is not set
- # CONFIG_ACCESSIBILITY is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
-@@ -1020,16 +1121,20 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_DS1307 is not set
- # CONFIG_RTC_DRV_DS1374 is not set
- # CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_DS3232 is not set
- # CONFIG_RTC_DRV_MAX6900 is not set
- # CONFIG_RTC_DRV_RS5C372 is not set
- # CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_ISL12022 is not set
- # CONFIG_RTC_DRV_X1205 is not set
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_BQ32K is not set
- # CONFIG_RTC_DRV_S35390A is not set
- # CONFIG_RTC_DRV_FM3130 is not set
- # CONFIG_RTC_DRV_RX8581 is not set
-+# CONFIG_RTC_DRV_RX8025 is not set
-
- #
- # SPI RTC drivers
-@@ -1041,6 +1146,7 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_R9701 is not set
- # CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_DS3234 is not set
-+# CONFIG_RTC_DRV_PCF2123 is not set
-
- #
- # Platform RTC drivers
-@@ -1053,21 +1159,27 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T35 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_MSM6242 is not set
- # CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_RP5C01 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-
- #
- # on-CPU RTC drivers
- #
-+# CONFIG_RTC_DRV_GENERIC is not set
- CONFIG_RTC_MCF=y
- # CONFIG_RTC_M5441X is not set
- CONFIG_DMADEVICES=y
-+# CONFIG_DMADEVICES_DEBUG is not set
-
- #
- # DMA Devices
- #
- CONFIG_COLDFIRE_EDMA=y
- CONFIG_COLDFIRE_EDMA_TEST=m
-+# CONFIG_TIMB_DMA is not set
-+# CONFIG_AUXDISPLAY is not set
- # CONFIG_UIO is not set
- # CONFIG_STAGING is not set
-
-@@ -1086,6 +1198,7 @@ CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
-+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
- CONFIG_EXT3_FS_XATTR=y
- # CONFIG_EXT3_FS_POSIX_ACL is not set
- # CONFIG_EXT3_FS_SECURITY is not set
-@@ -1094,21 +1207,27 @@ CONFIG_JBD=y
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--# CONFIG_FS_POSIX_ACL is not set
--CONFIG_FILE_LOCKING=y
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
--# CONFIG_OCFS2_FS is not set
- # CONFIG_BTRFS_FS is not set
-+# CONFIG_NILFS2_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+CONFIG_FSNOTIFY=y
- CONFIG_DNOTIFY=y
--CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
-+# CONFIG_FANOTIFY is not set
- # CONFIG_QUOTA is not set
--# CONFIG_AUTOFS_FS is not set
-+# CONFIG_QUOTACTL is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-
- #
-+# Caches
-+#
-+# CONFIG_FSCACHE is not set
-+
-+#
- # CD-ROM/DVD Filesystems
- #
- CONFIG_ISO9660_FS=y
-@@ -1148,6 +1267,7 @@ CONFIG_MISC_FILESYSTEMS=y
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
-+# CONFIG_YAFFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
- CONFIG_JFFS2_FS_WRITEBUFFER=y
-@@ -1159,6 +1279,7 @@ CONFIG_JFFS2_ZLIB=y
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_LOGFS is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_SQUASHFS is not set
- # CONFIG_VXFS_FS is not set
-@@ -1180,10 +1301,8 @@ CONFIG_LOCKD=y
- CONFIG_LOCKD_V4=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
--# CONFIG_SUNRPC_REGISTER_V4 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
--# CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
-+# CONFIG_CEPH_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-@@ -1250,7 +1369,6 @@ CONFIG_NLS_ISO8859_1=y
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=y
--# CONFIG_DLM is not set
-
- #
- # Kernel hacking
-@@ -1260,19 +1378,18 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
- # CONFIG_ENABLE_MUST_CHECK is not set
- CONFIG_FRAME_WARN=1024
- # CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_STRIP_ASM_SYMS is not set
- # CONFIG_UNUSED_SYMBOLS is not set
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- # CONFIG_DEBUG_KERNEL is not set
--# CONFIG_DEBUG_BUGVERBOSE is not set
-+# CONFIG_HARDLOCKUP_DETECTOR is not set
-+CONFIG_BKL=y
-+# CONFIG_SPARSE_RCU_POINTER is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_MEMORY_INIT is not set
--# CONFIG_RCU_CPU_STALL_DETECTOR is not set
- # CONFIG_SYSCTL_SYSCALL_CHECK is not set
--
--#
--# Tracers
--#
--# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_ATOMIC64_SELFTEST is not set
- # CONFIG_SAMPLES is not set
- # CONFIG_BOOTPARAM is not set
-
-@@ -1280,15 +1397,16 @@ CONFIG_FRAME_WARN=1024
- # Security options
- #
- # CONFIG_KEYS is not set
-+# CONFIG_SECURITY_DMESG_RESTRICT is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITYFS is not set
--# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_DEFAULT_SECURITY_DAC=y
-+CONFIG_DEFAULT_SECURITY=""
- CONFIG_CRYPTO=y
-
- #
- # Crypto core or helper
- #
--# CONFIG_CRYPTO_FIPS is not set
- CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_ALGAPI2=y
- CONFIG_CRYPTO_AEAD=y
-@@ -1298,10 +1416,13 @@ CONFIG_CRYPTO_BLKCIPHER2=y
- CONFIG_CRYPTO_HASH=y
- CONFIG_CRYPTO_HASH2=y
- CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_PCOMP2=y
- CONFIG_CRYPTO_MANAGER=y
- CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
- # CONFIG_CRYPTO_GF128MUL is not set
- # CONFIG_CRYPTO_NULL is not set
-+CONFIG_CRYPTO_WORKQUEUE=y
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_AUTHENC=y
- CONFIG_CRYPTO_TEST=m
-@@ -1329,11 +1450,13 @@ CONFIG_CRYPTO_PCBC=m
- #
- CONFIG_CRYPTO_HMAC=y
- # CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_VMAC is not set
-
- #
- # Digest
- #
- CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_GHASH is not set
- # CONFIG_CRYPTO_MD4 is not set
- CONFIG_CRYPTO_MD5=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
-@@ -1370,26 +1493,22 @@ CONFIG_CRYPTO_DES=y
- # Compression
- #
- # CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_ZLIB is not set
- # CONFIG_CRYPTO_LZO is not set
-
- #
- # Random Number Generation
- #
- # CONFIG_CRYPTO_ANSI_CPRNG is not set
--
--#
--# OCF Configuration
--#
--
--#
--# Talitos Driver
--#
-+# CONFIG_CRYPTO_USER_API_HASH is not set
-+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
- CONFIG_CRYPTO_HW=y
- CONFIG_CRYPTO_DEV_MCFCAU=y
- CONFIG_CRYPTO_DEV_MCFCAU_DES=y
- CONFIG_CRYPTO_DEV_MCFCAU_AES=y
- CONFIG_CRYPTO_DEV_MCFCAU_MD5=y
- CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y
-+# CONFIG_BINARY_PRINTF is not set
-
- #
- # Library routines
-@@ -1405,8 +1524,12 @@ CONFIG_CRC7=y
- CONFIG_LIBCRC32C=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+# CONFIG_XZ_DEC is not set
-+# CONFIG_XZ_DEC_BCJ is not set
-+CONFIG_DECOMPRESS_GZIP=y
- CONFIG_GENERIC_ALLOCATOR=y
--CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
-+CONFIG_NLATTR=y
-+CONFIG_GENERIC_ATOMIC64=y
---- a/arch/m68k/configs/m54455evb_defconfig
-+++ b/arch/m68k/configs/m54455evb_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.29
--# Tue Aug 24 16:16:14 2010
-+# Linux kernel version: 2.6.38
-+# Thu Jul 14 16:21:08 2011
- #
- CONFIG_M68K=y
- CONFIG_MMU=y
-@@ -17,7 +17,9 @@ CONFIG_GENERIC_IOMAP=y
- # CONFIG_NO_IOPORT is not set
- # CONFIG_NO_DMA is not set
- CONFIG_HZ=100
-+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+CONFIG_CONSTRUCTORS=y
-
- #
- # General setup
-@@ -25,6 +27,7 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNA
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_CROSS_COMPILE=""
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- CONFIG_SWAP=y
-@@ -34,38 +37,40 @@ CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_AUDIT is not set
-+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-
- #
- # RCU Subsystem
- #
--CONFIG_CLASSIC_RCU=y
--# CONFIG_TREE_RCU is not set
-+CONFIG_TINY_RCU=y
- # CONFIG_PREEMPT_RCU is not set
-+# CONFIG_RCU_TRACE is not set
- # CONFIG_TREE_RCU_TRACE is not set
--# CONFIG_PREEMPT_RCU_TRACE is not set
- CONFIG_IKCONFIG=y
- CONFIG_IKCONFIG_PROC=y
- CONFIG_LOG_BUF_SHIFT=17
--CONFIG_GROUP_SCHED=y
--CONFIG_FAIR_GROUP_SCHED=y
--# CONFIG_RT_GROUP_SCHED is not set
--CONFIG_USER_SCHED=y
--# CONFIG_CGROUP_SCHED is not set
- # CONFIG_CGROUPS is not set
--CONFIG_SYSFS_DEPRECATED=y
--CONFIG_SYSFS_DEPRECATED_V2=y
--# CONFIG_RELAY is not set
- CONFIG_NAMESPACES=y
- # CONFIG_UTS_NS is not set
- # CONFIG_IPC_NS is not set
- # CONFIG_USER_NS is not set
- # CONFIG_PID_NS is not set
- # CONFIG_NET_NS is not set
-+# CONFIG_SCHED_AUTOGROUP is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_RD_GZIP=y
-+# CONFIG_RD_BZIP2 is not set
-+# CONFIG_RD_LZMA is not set
-+# CONFIG_RD_XZ is not set
-+# CONFIG_RD_LZO is not set
- # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
- CONFIG_ANON_INODES=y
-+CONFIG_EXPERT=y
- CONFIG_EMBEDDED=y
- CONFIG_UID16=y
- CONFIG_SYSCTL_SYSCALL=y
-@@ -83,6 +88,10 @@ CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_AIO=y
-+
-+#
-+# Kernel Performance Events And Counters
-+#
- CONFIG_VM_EVENT_COUNTERS=y
- CONFIG_PCI_QUIRKS=y
- CONFIG_COMPAT_BRK=y
-@@ -90,6 +99,10 @@ CONFIG_SLAB=y
- # CONFIG_SLUB is not set
- # CONFIG_SLOB is not set
- # CONFIG_PROFILING is not set
-+
-+#
-+# GCOV-based kernel profiling
-+#
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
-@@ -101,8 +114,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_BLOCK=y
--CONFIG_LBD=y
--# CONFIG_BLK_DEV_IO_TRACE is not set
-+CONFIG_LBDAF=y
- # CONFIG_BLK_DEV_BSG is not set
- # CONFIG_BLK_DEV_INTEGRITY is not set
-
-@@ -110,14 +122,41 @@ CONFIG_LBD=y
- # IO Schedulers
- #
- CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
- CONFIG_IOSCHED_DEADLINE=y
- CONFIG_IOSCHED_CFQ=y
--# CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_INLINE_SPIN_TRYLOCK is not set
-+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK is not set
-+# CONFIG_INLINE_SPIN_LOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_SPIN_UNLOCK=y
-+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_READ_TRYLOCK is not set
-+# CONFIG_INLINE_READ_LOCK is not set
-+# CONFIG_INLINE_READ_LOCK_BH is not set
-+# CONFIG_INLINE_READ_LOCK_IRQ is not set
-+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_READ_UNLOCK=y
-+# CONFIG_INLINE_READ_UNLOCK_BH is not set
-+CONFIG_INLINE_READ_UNLOCK_IRQ=y
-+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_WRITE_TRYLOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK_BH is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_WRITE_UNLOCK=y
-+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
- # CONFIG_FREEZER is not set
-
- #
-@@ -172,18 +211,19 @@ CONFIG_SINGLE_MEMORY_CHUNK=y
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
- CONFIG_SELECT_MEMORY_MODEL=y
- CONFIG_FLATMEM_MANUAL=y
--# CONFIG_DISCONTIGMEM_MANUAL is not set
--# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- CONFIG_NEED_MULTIPLE_NODES=y
- CONFIG_PAGEFLAGS_EXTENDED=y
- CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_COMPACTION is not set
- # CONFIG_PHYS_ADDR_T_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
- CONFIG_BOUNCE=y
- CONFIG_VIRT_TO_BUS=y
--CONFIG_UNEVICTABLE_LRU=y
-+# CONFIG_KSM is not set
-+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-+CONFIG_NEED_PER_CPU_KM=y
-
- #
- # General setup
-@@ -196,8 +236,8 @@ CONFIG_HAVE_AOUT=y
- CONFIG_PROC_HARDWARE=y
- CONFIG_ZONE_DMA=y
- # CONFIG_ARCH_SUPPORTS_MSI is not set
--CONFIG_PCI_LEGACY=y
- # CONFIG_PCI_STUB is not set
-+# CONFIG_PCI_IOV is not set
-
- #
- # Power management options
-@@ -208,9 +248,7 @@ CONFIG_NET=y
- #
- # Networking options
- #
--CONFIG_COMPAT_NET_DEV_OPS=y
- CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
-@@ -233,7 +271,7 @@ CONFIG_IP_PNP=y
- # CONFIG_IP_PNP_BOOTP is not set
- # CONFIG_IP_PNP_RARP is not set
- # CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+# CONFIG_NET_IPGRE_DEMUX is not set
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
- CONFIG_INET_AH=y
-@@ -253,11 +291,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
-+# CONFIG_RDS is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
-+# CONFIG_L2TP is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_NET_DSA is not set
- # CONFIG_VLAN_8021Q is not set
-@@ -269,8 +310,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
-+# CONFIG_PHONET is not set
-+# CONFIG_IEEE802154 is not set
- # CONFIG_NET_SCHED is not set
- # CONFIG_DCB is not set
-+# CONFIG_BATMAN_ADV is not set
-
- #
- # Network testing
-@@ -281,17 +325,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
--# CONFIG_PHONET is not set
- CONFIG_WIRELESS=y
- # CONFIG_CFG80211 is not set
--CONFIG_WIRELESS_OLD_REGULATORY=y
--# CONFIG_WIRELESS_EXT is not set
- # CONFIG_LIB80211 is not set
--# CONFIG_MAC80211 is not set
-+
-+#
-+# CFG80211 needs to be enabled for MAC80211
-+#
-+
-+#
-+# Some wireless drivers require a rate control algorithm
-+#
- # CONFIG_WIMAX is not set
- # CONFIG_RFKILL is not set
- # CONFIG_NET_9P is not set
--# CONFIG_KLIPS is not set
-+# CONFIG_CAIF is not set
-+# CONFIG_CEPH_LIB is not set
-
- #
- # Device Drivers
-@@ -301,6 +350,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
- # Generic Driver Options
- #
- CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_DEVTMPFS is not set
- # CONFIG_STANDALONE is not set
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- CONFIG_FW_LOADER=y
-@@ -310,9 +360,9 @@ CONFIG_EXTRA_FIRMWARE=""
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_CONCAT is not set
- CONFIG_MTD_PARTITIONS=y
--# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_REDBOOT_PARTS is not set
- CONFIG_MTD_CMDLINE_PARTS=y
- # CONFIG_MTD_AR7_PARTS is not set
-@@ -328,6 +378,7 @@ CONFIG_MTD_BLOCK=y
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_SM_FTL is not set
- # CONFIG_MTD_OOPS is not set
-
- #
-@@ -373,6 +424,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
- # CONFIG_MTD_PMC551 is not set
- # CONFIG_MTD_DATAFLASH is not set
- # CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SST25L is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -391,10 +443,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
- # LPDDR flash memory drivers
- #
- # CONFIG_MTD_LPDDR is not set
--
--#
--# UBI - Unsorted block images
--#
- # CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
-@@ -405,6 +453,10 @@ CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+
-+#
-+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-+#
- # CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_SX8 is not set
- # CONFIG_BLK_DEV_UB is not set
-@@ -415,13 +467,27 @@ CONFIG_BLK_DEV_RAM_SIZE=64000
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- # CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_RBD is not set
- CONFIG_MISC_DEVICES=y
-+# CONFIG_AD525X_DPOT is not set
- # CONFIG_PHANTOM is not set
- # CONFIG_SGI_IOC4 is not set
- # CONFIG_TIFM_CORE is not set
- # CONFIG_ICS932S401 is not set
- # CONFIG_ENCLOSURE_SERVICES is not set
- # CONFIG_HP_ILO is not set
-+# CONFIG_APDS9802ALS is not set
-+# CONFIG_ISL29003 is not set
-+# CONFIG_ISL29020 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_SENSORS_BH1780 is not set
-+# CONFIG_SENSORS_BH1770 is not set
-+# CONFIG_SENSORS_APDS990X is not set
-+# CONFIG_HMC6352 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_TI_DAC7512 is not set
-+# CONFIG_BMP085 is not set
-+# CONFIG_PCH_PHUB is not set
- # CONFIG_C2PORT is not set
-
- #
-@@ -430,13 +496,20 @@ CONFIG_MISC_DEVICES=y
- # CONFIG_EEPROM_AT24 is not set
- # CONFIG_EEPROM_AT25 is not set
- # CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_MAX6875 is not set
- # CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_CB710_CORE is not set
-+
-+#
-+# Texas Instruments shared transport line discipline
-+#
- CONFIG_HAVE_IDE=y
- # CONFIG_IDE is not set
-
- #
- # SCSI device support
- #
-+CONFIG_SCSI_MOD=y
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
- CONFIG_SCSI_DMA=y
-@@ -453,10 +526,6 @@ CONFIG_BLK_DEV_SD=y
- # CONFIG_BLK_DEV_SR is not set
- CONFIG_CHR_DEV_SG=y
- # CONFIG_CHR_DEV_SCH is not set
--
--#
--# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
--#
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-@@ -469,33 +538,41 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
- # CONFIG_SCSI_SRP_ATTRS is not set
- CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_ISCSI_TCP is not set
-+# CONFIG_ISCSI_BOOT_SYSFS is not set
-+# CONFIG_SCSI_BNX2_ISCSI is not set
-+# CONFIG_BE2ISCSI is not set
- # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_HPSA is not set
- # CONFIG_SCSI_3W_9XXX is not set
-+# CONFIG_SCSI_3W_SAS is not set
- # CONFIG_SCSI_ACARD is not set
- # CONFIG_SCSI_AACRAID is not set
- # CONFIG_SCSI_AIC7XXX is not set
- # CONFIG_SCSI_AIC7XXX_OLD is not set
- # CONFIG_SCSI_AIC79XX is not set
- # CONFIG_SCSI_AIC94XX is not set
-+# CONFIG_SCSI_MVSAS is not set
- # CONFIG_SCSI_DPT_I2O is not set
- # CONFIG_SCSI_ADVANSYS is not set
- # CONFIG_SCSI_ARCMSR is not set
- # CONFIG_MEGARAID_NEWGEN is not set
- # CONFIG_MEGARAID_LEGACY is not set
- # CONFIG_MEGARAID_SAS is not set
-+# CONFIG_SCSI_MPT2SAS is not set
- # CONFIG_SCSI_HPTIOP is not set
- # CONFIG_LIBFC is not set
-+# CONFIG_LIBFCOE is not set
- # CONFIG_FCOE is not set
- # CONFIG_SCSI_DMX3191D is not set
- # CONFIG_SCSI_FUTURE_DOMAIN is not set
- # CONFIG_SCSI_IPS is not set
- # CONFIG_SCSI_INITIO is not set
- # CONFIG_SCSI_INIA100 is not set
--# CONFIG_SCSI_MVSAS is not set
- # CONFIG_SCSI_STEX is not set
- # CONFIG_SCSI_SYM53C8XX_2 is not set
- # CONFIG_SCSI_IPR is not set
-@@ -507,82 +584,116 @@ CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_SCSI_DC390T is not set
- # CONFIG_SCSI_NSP32 is not set
- # CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_PMCRAID is not set
-+# CONFIG_SCSI_PM8001 is not set
- # CONFIG_SCSI_SRP is not set
-+# CONFIG_SCSI_BFA_FC is not set
- # CONFIG_SCSI_DH is not set
-+# CONFIG_SCSI_OSD_INITIATOR is not set
- CONFIG_ATA=y
- # CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_ATA_VERBOSE_ERROR=y
- CONFIG_SATA_PMP=y
-+
-+#
-+# Controllers with non-SFF native interface
-+#
- # CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_AHCI_PLATFORM is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_SATA_ACARD_AHCI is not set
- # CONFIG_SATA_SIL24 is not set
- CONFIG_ATA_SFF=y
--# CONFIG_SATA_SVW is not set
-+
-+#
-+# SFF controllers with custom DMA interface
-+#
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_SX4 is not set
-+CONFIG_ATA_BMDMA=y
-+
-+#
-+# SATA SFF controllers with BMDMA
-+#
- # CONFIG_ATA_PIIX is not set
- # CONFIG_SATA_MV is not set
- # CONFIG_SATA_NV is not set
--# CONFIG_PDC_ADMA is not set
--# CONFIG_SATA_QSTOR is not set
- # CONFIG_SATA_PROMISE is not set
--# CONFIG_SATA_SX4 is not set
- # CONFIG_SATA_SIL is not set
- # CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_SVW is not set
- # CONFIG_SATA_ULI is not set
- # CONFIG_SATA_VIA is not set
- # CONFIG_SATA_VITESSE is not set
--# CONFIG_SATA_INIC162X is not set
-+
-+#
-+# PATA SFF controllers with BMDMA
-+#
- # CONFIG_PATA_ALI is not set
- # CONFIG_PATA_AMD is not set
- # CONFIG_PATA_ARTOP is not set
- # CONFIG_PATA_ATIIXP is not set
--# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_ATP867X is not set
- # CONFIG_PATA_CMD64X is not set
- # CONFIG_PATA_CS5520 is not set
- # CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CS5536 is not set
- # CONFIG_PATA_CYPRESS is not set
- # CONFIG_PATA_EFAR is not set
--# CONFIG_ATA_GENERIC is not set
- # CONFIG_PATA_HPT366 is not set
- # CONFIG_PATA_HPT37X is not set
- # CONFIG_PATA_HPT3X2N is not set
- # CONFIG_PATA_HPT3X3 is not set
--# CONFIG_PATA_IT821X is not set
- # CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_IT821X is not set
- # CONFIG_PATA_JMICRON is not set
--# CONFIG_PATA_TRIFLEX is not set
- # CONFIG_PATA_MARVELL is not set
--# CONFIG_PATA_MPIIX is not set
--# CONFIG_PATA_OLDPIIX is not set
- # CONFIG_PATA_NETCELL is not set
- # CONFIG_PATA_NINJA32 is not set
--# CONFIG_PATA_NS87410 is not set
- # CONFIG_PATA_NS87415 is not set
--# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OLDPIIX is not set
- # CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC2027X is not set
- # CONFIG_PATA_PDC_OLD is not set
- # CONFIG_PATA_RADISYS is not set
--# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_RDC is not set
- # CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SCH is not set
- # CONFIG_PATA_SERVERWORKS is not set
--# CONFIG_PATA_PDC2027X is not set
- # CONFIG_PATA_SIL680 is not set
- # CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_TOSHIBA is not set
-+# CONFIG_PATA_TRIFLEX is not set
- # CONFIG_PATA_VIA is not set
- # CONFIG_PATA_WINBOND is not set
--# CONFIG_PATA_PLATFORM is not set
--# CONFIG_PATA_SCH is not set
- CONFIG_PATA_FSL=y
- CONFIG_FSL_PATA_USE_DMA=y
--# CONFIG_MD is not set
--# CONFIG_FUSION is not set
-
- #
--# IEEE 1394 (FireWire) support
-+# PIO-only SFF controllers
- #
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_PATA_RZ1000 is not set
-
- #
--# Enable only one of the two stacks, unless you know what you are doing
-+# Generic fallback / legacy drivers
-+#
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_LEGACY is not set
-+# CONFIG_MD is not set
-+# CONFIG_TARGET_CORE is not set
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
- #
- # CONFIG_FIREWIRE is not set
--# CONFIG_IEEE1394 is not set
-+# CONFIG_FIREWIRE_NOSY is not set
- # CONFIG_I2O is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
-@@ -592,6 +703,7 @@ CONFIG_NETDEVICES=y
- # CONFIG_TUN is not set
- # CONFIG_VETH is not set
- # CONFIG_ARCNET is not set
-+CONFIG_MII=y
- CONFIG_PHYLIB=y
-
- #
-@@ -606,23 +718,25 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- # CONFIG_BROADCOM5222_PHY is not set
-+# CONFIG_BCM63XX_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
- # CONFIG_REALTEK_PHY is not set
- # CONFIG_NATIONAL_PHY is not set
- # CONFIG_NATIONAL8364x_PHY is not set
- CONFIG_NATIONAL8384x_PHY=y
--# CONFIG_MicrelKSZ8041_PHY is not set
- # CONFIG_STE10XP is not set
- # CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_MICREL_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
- # CONFIG_HAPPYMEAL is not set
- # CONFIG_SUNGEM is not set
- # CONFIG_CASSINI is not set
- # CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_SMC91X is not set
- # CONFIG_ENC28J60 is not set
-+# CONFIG_ETHOC is not set
- # CONFIG_DNET is not set
- # CONFIG_NET_TULIP is not set
- # CONFIG_HP100 is not set
-@@ -637,6 +751,7 @@ CONFIG_NET_PCI=y
- # CONFIG_PCNET32 is not set
- # CONFIG_AMD8111_ETH is not set
- # CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_KSZ884X_PCI is not set
- # CONFIG_B44 is not set
- # CONFIG_FORCEDETH is not set
- CONFIG_E100=y
-@@ -655,6 +770,8 @@ CONFIG_8139TOO=y
- # CONFIG_SMSC9420 is not set
- # CONFIG_SUNDANCE is not set
- # CONFIG_TLAN is not set
-+# CONFIG_KS8851 is not set
-+# CONFIG_KS8851_MLL is not set
- # CONFIG_VIA_RHINE is not set
- # CONFIG_SC92031 is not set
- CONFIG_FEC=y
-@@ -667,6 +784,7 @@ CONFIG_E1000=y
- # CONFIG_E1000E is not set
- # CONFIG_IP1000 is not set
- # CONFIG_IGB is not set
-+# CONFIG_IGBVF is not set
- # CONFIG_NS83820 is not set
- # CONFIG_HAMACHI is not set
- # CONFIG_YELLOWFIN is not set
-@@ -677,20 +795,21 @@ CONFIG_E1000=y
- # CONFIG_VIA_VELOCITY is not set
- # CONFIG_TIGON3 is not set
- # CONFIG_BNX2 is not set
-+# CONFIG_CNIC is not set
- # CONFIG_QLA3XXX is not set
- # CONFIG_ATL1 is not set
- # CONFIG_ATL1E is not set
- # CONFIG_ATL1C is not set
- # CONFIG_JME is not set
-+# CONFIG_STMMAC_ETH is not set
-+# CONFIG_PCH_GBE is not set
- # CONFIG_NETDEV_10000 is not set
- # CONFIG_TR is not set
--
--#
--# Wireless LAN
--#
--# CONFIG_WLAN_PRE80211 is not set
--# CONFIG_WLAN_80211 is not set
--# CONFIG_IWLWIFI_LEDS is not set
-+CONFIG_WLAN=y
-+# CONFIG_ATMEL is not set
-+# CONFIG_PRISM54 is not set
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-
- #
- # Enable WiMAX (Networking options) to see the WiMAX drivers
-@@ -704,7 +823,12 @@ CONFIG_E1000=y
- # CONFIG_USB_PEGASUS is not set
- CONFIG_USB_RTL8150=y
- # CONFIG_USB_USBNET is not set
-+# CONFIG_USB_IPHETH is not set
- # CONFIG_WAN is not set
-+
-+#
-+# CAIF transport drivers
-+#
- # CONFIG_FDDI is not set
- # CONFIG_HIPPI is not set
- # CONFIG_PPP is not set
-@@ -713,6 +837,7 @@ CONFIG_USB_RTL8150=y
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_VMXNET3 is not set
- # CONFIG_ISDN is not set
- # CONFIG_PHONE is not set
-
-@@ -722,6 +847,7 @@ CONFIG_USB_RTL8150=y
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- # CONFIG_INPUT_POLLDEV is not set
-+# CONFIG_INPUT_SPARSEKMAP is not set
-
- #
- # Userland interfaces
-@@ -738,12 +864,18 @@ CONFIG_INPUT_EVDEV=y
- # Input Device Drivers
- #
- CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ADP5588 is not set
- # CONFIG_KEYBOARD_ATKBD is not set
--# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_QT2160 is not set
- # CONFIG_KEYBOARD_LKKBD is not set
--# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_TCA6416 is not set
-+# CONFIG_KEYBOARD_MAX7359 is not set
-+# CONFIG_KEYBOARD_MCS is not set
- # CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_OPENCORES is not set
- # CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
- # CONFIG_INPUT_TABLET is not set
-@@ -758,6 +890,8 @@ CONFIG_SERIO_SERPORT=y
- # CONFIG_SERIO_PCIPS2 is not set
- # CONFIG_SERIO_LIBPS2 is not set
- # CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO_ALTERA_PS2 is not set
-+# CONFIG_SERIO_PS2MULT is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -771,6 +905,7 @@ CONFIG_HW_CONSOLE=y
- CONFIG_DEVKMEM=y
- CONFIG_DEVSRAM=m
- # CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_N_GSM is not set
- # CONFIG_NOZOMI is not set
-
- #
-@@ -781,6 +916,9 @@ CONFIG_DEVSRAM=m
- #
- # Non-8250 serial port support
- #
-+# CONFIG_SERIAL_MAX3100 is not set
-+# CONFIG_SERIAL_MAX3107 is not set
-+# CONFIG_SERIAL_MFD_HSU is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- # CONFIG_SERIAL_COLDFIRE_IRDA is not set
-@@ -789,9 +927,14 @@ CONFIG_SERIAL_MCF=y
- CONFIG_SERIAL_MCF_BAUDRATE=115200
- CONFIG_SERIAL_MCF_CONSOLE=y
- # CONFIG_SERIAL_JSM is not set
-+# CONFIG_SERIAL_TIMBERDALE is not set
-+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-+# CONFIG_SERIAL_ALTERA_UART is not set
-+# CONFIG_SERIAL_PCH_UART is not set
- CONFIG_UNIX98_PTYS=y
- # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
- # CONFIG_LEGACY_PTYS is not set
-+# CONFIG_TTY_PRINTK is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
- # CONFIG_GEN_RTC is not set
-@@ -799,9 +942,12 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_APPLICOM is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-+# CONFIG_RAMOOPS is not set
- CONFIG_I2C=y
- CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_COMPAT=y
- CONFIG_I2C_CHARDEV=y
-+# CONFIG_I2C_MUX is not set
- CONFIG_I2C_HELPER_AUTO=y
-
- #
-@@ -829,9 +975,13 @@ CONFIG_I2C_HELPER_AUTO=y
- #
- # I2C system bus drivers (mostly embedded / system-on-chip)
- #
-+# CONFIG_I2C_INTEL_MID is not set
- CONFIG_I2C_MCF=y
- # CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_XILINX is not set
-+# CONFIG_I2C_EG20T is not set
-
- #
- # External I2C/SMBus adapter drivers
-@@ -841,30 +991,12 @@ CONFIG_I2C_MCF=y
- # CONFIG_I2C_TINY_USB is not set
-
- #
--# Graphics adapter I2C/DDC channel drivers
--#
--# CONFIG_I2C_VOODOO3 is not set
--
--#
- # Other I2C/SMBus bus drivers
- #
--# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_STUB is not set
--
--#
--# Miscellaneous I2C Chip support
--#
--# CONFIG_DS1682 is not set
--# CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_PCF8575 is not set
--# CONFIG_SENSORS_PCA9539 is not set
--# CONFIG_SENSORS_PCF8591 is not set
--# CONFIG_SENSORS_MAX6875 is not set
--# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
--# CONFIG_I2C_DEBUG_CHIP is not set
- CONFIG_SPI=y
- CONFIG_SPI_MASTER=y
-
-@@ -874,19 +1006,29 @@ CONFIG_SPI_MASTER=y
- # CONFIG_SPI_BITBANG is not set
- CONFIG_SPI_DSPI=y
- CONFIG_SPI_COLDFIRE_DSPI_EDMA=y
--# CONFIG_VOIP_FXS is not set
--# CONFIG_VOIP_FXO is not set
-+# CONFIG_SPI_PXA2XX_PCI is not set
-+# CONFIG_SPI_TOPCLIFF_PCH is not set
-+# CONFIG_SPI_XILINX is not set
-+# CONFIG_SPI_DESIGNWARE is not set
-
- #
- # SPI Protocol Masters
- #
- # CONFIG_SPI_SPIDEV is not set
- # CONFIG_SPI_TLE62X0 is not set
-+
-+#
-+# PPS support
-+#
-+# CONFIG_PPS is not set
-+
-+#
-+# PPS generators support
-+#
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
- # CONFIG_THERMAL is not set
--# CONFIG_THERMAL_HWMON is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -913,41 +1055,34 @@ CONFIG_SSB_POSSIBLE=y
- # Sonics Silicon Backplane
- #
- # CONFIG_SSB is not set
--
--#
--# Multifunction device drivers
--#
-+CONFIG_MFD_SUPPORT=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_TPS6507X is not set
- # CONFIG_MFD_TMIO is not set
- # CONFIG_PMIC_DA903X is not set
-+# CONFIG_PMIC_ADP5520 is not set
- # CONFIG_MFD_WM8400 is not set
--# CONFIG_MFD_WM8350_I2C is not set
- # CONFIG_MFD_PCF50633 is not set
-+# CONFIG_MFD_MC13XXX is not set
-+# CONFIG_ABX500_CORE is not set
-+# CONFIG_MFD_CS5535 is not set
-+# CONFIG_LPC_SCH is not set
-+# CONFIG_MFD_RDC321X is not set
-+# CONFIG_MFD_JANZ_CMODIO is not set
-+# CONFIG_MFD_VX855 is not set
-+# CONFIG_MFD_WL1273_CORE is not set
- # CONFIG_REGULATOR is not set
--
--#
--# Multimedia devices
--#
--
--#
--# Multimedia core support
--#
--# CONFIG_VIDEO_DEV is not set
--# CONFIG_DVB_CORE is not set
--# CONFIG_VIDEO_MEDIA is not set
--
--#
--# Multimedia drivers
--#
--CONFIG_DAB=y
--# CONFIG_USB_DABUSB is not set
-+# CONFIG_MEDIA_SUPPORT is not set
-
- #
- # Graphics support
- #
-+CONFIG_VGA_ARB=y
-+CONFIG_VGA_ARB_MAX_GPUS=16
- # CONFIG_DRM is not set
-+# CONFIG_STUB_POULSBO is not set
- # CONFIG_VGASTATE is not set
- CONFIG_VIDEO_OUTPUT_CONTROL=m
- # CONFIG_FB is not set
-@@ -964,6 +1099,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
- CONFIG_DUMMY_CONSOLE=y
- CONFIG_SOUND=y
- CONFIG_SOUND_OSS_CORE=y
-+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
- CONFIG_SND=y
- CONFIG_SND_TIMER=y
- CONFIG_SND_PCM=y
-@@ -972,14 +1108,19 @@ CONFIG_SND_OSSEMUL=y
- # CONFIG_SND_MIXER_OSS is not set
- CONFIG_SND_PCM_OSS=y
- CONFIG_SND_PCM_OSS_PLUGINS=y
--# CONFIG_SND_HRTIMER is not set
- # CONFIG_SND_DYNAMIC_MINORS is not set
- CONFIG_SND_SUPPORT_OLD_API=y
- CONFIG_SND_VERBOSE_PROCFS=y
- # CONFIG_SND_VERBOSE_PRINTK is not set
- # CONFIG_SND_DEBUG is not set
-+# CONFIG_SND_RAWMIDI_SEQ is not set
-+# CONFIG_SND_OPL3_LIB_SEQ is not set
-+# CONFIG_SND_OPL4_LIB_SEQ is not set
-+# CONFIG_SND_SBAWE_SEQ is not set
-+# CONFIG_SND_EMU10K1_SEQ is not set
- CONFIG_SND_DRIVERS=y
- # CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_ALOOP is not set
- # CONFIG_SND_MTPAV is not set
- # CONFIG_SND_SERIAL_U16550 is not set
- # CONFIG_SND_MPU401 is not set
-@@ -1000,6 +1141,8 @@ CONFIG_SND_PCI=y
- # CONFIG_SND_OXYGEN is not set
- # CONFIG_SND_CS4281 is not set
- # CONFIG_SND_CS46XX is not set
-+# CONFIG_SND_CS5535AUDIO is not set
-+# CONFIG_SND_CTXFI is not set
- # CONFIG_SND_DARLA20 is not set
- # CONFIG_SND_GINA20 is not set
- # CONFIG_SND_LAYLA20 is not set
-@@ -1012,6 +1155,8 @@ CONFIG_SND_PCI=y
- # CONFIG_SND_INDIGO is not set
- # CONFIG_SND_INDIGOIO is not set
- # CONFIG_SND_INDIGODJ is not set
-+# CONFIG_SND_INDIGOIOX is not set
-+# CONFIG_SND_INDIGODJX is not set
- # CONFIG_SND_EMU10K1 is not set
- # CONFIG_SND_EMU10K1X is not set
- # CONFIG_SND_ENS1370 is not set
-@@ -1022,12 +1167,12 @@ CONFIG_SND_PCI=y
- # CONFIG_SND_HDA_INTEL is not set
- # CONFIG_SND_HDSP is not set
- # CONFIG_SND_HDSPM is not set
--# CONFIG_SND_HIFIER is not set
- # CONFIG_SND_ICE1712 is not set
- # CONFIG_SND_ICE1724 is not set
- # CONFIG_SND_INTEL8X0 is not set
- # CONFIG_SND_INTEL8X0M is not set
- # CONFIG_SND_KORG1212 is not set
-+# CONFIG_SND_LX6464ES is not set
- # CONFIG_SND_MAESTRO3 is not set
- # CONFIG_SND_MIXART is not set
- # CONFIG_SND_NM256 is not set
-@@ -1051,12 +1196,12 @@ CONFIG_SND_COLDFIRE=y
- CONFIG_SND_SPI=y
- CONFIG_SND_USB=y
- # CONFIG_SND_USB_AUDIO is not set
-+# CONFIG_SND_USB_UA101 is not set
- # CONFIG_SND_USB_CAIAQ is not set
- # CONFIG_SND_SOC is not set
- # CONFIG_SOUND_PRIME is not set
- CONFIG_HID_SUPPORT=y
- CONFIG_HID=y
--CONFIG_HID_DEBUG=y
- # CONFIG_HIDRAW is not set
-
- #
-@@ -1069,28 +1214,51 @@ CONFIG_USB_HID=y
- #
- # Special HID drivers
- #
--CONFIG_HID_COMPAT=y
-+# CONFIG_HID_3M_PCT is not set
- # CONFIG_HID_A4TECH is not set
-+# CONFIG_HID_ACRUX_FF is not set
- # CONFIG_HID_APPLE is not set
- # CONFIG_HID_BELKIN is not set
-+# CONFIG_HID_CANDO is not set
- # CONFIG_HID_CHERRY is not set
- # CONFIG_HID_CHICONY is not set
-+# CONFIG_HID_PRODIKEYS is not set
- # CONFIG_HID_CYPRESS is not set
-+# CONFIG_HID_DRAGONRISE is not set
-+# CONFIG_HID_EMS_FF is not set
-+# CONFIG_HID_EGALAX is not set
- # CONFIG_HID_EZKEY is not set
-+# CONFIG_HID_KYE is not set
-+# CONFIG_HID_UCLOGIC is not set
-+# CONFIG_HID_WALTOP is not set
- # CONFIG_HID_GYRATION is not set
-+# CONFIG_HID_TWINHAN is not set
-+# CONFIG_HID_KENSINGTON is not set
- # CONFIG_HID_LOGITECH is not set
- # CONFIG_HID_MICROSOFT is not set
-+# CONFIG_HID_MOSART is not set
- # CONFIG_HID_MONTEREY is not set
-+# CONFIG_HID_MULTITOUCH is not set
- # CONFIG_HID_NTRIG is not set
-+# CONFIG_HID_ORTEK is not set
- # CONFIG_HID_PANTHERLORD is not set
- # CONFIG_HID_PETALYNX is not set
-+# CONFIG_HID_PICOLCD is not set
-+# CONFIG_HID_QUANTA is not set
-+# CONFIG_HID_ROCCAT is not set
-+# CONFIG_HID_ROCCAT_KONE is not set
-+# CONFIG_HID_ROCCAT_KONEPLUS is not set
-+# CONFIG_HID_ROCCAT_PYRA is not set
- # CONFIG_HID_SAMSUNG is not set
- # CONFIG_HID_SONY is not set
-+# CONFIG_HID_STANTUM is not set
- # CONFIG_HID_SUNPLUS is not set
--# CONFIG_GREENASIA_FF is not set
-+# CONFIG_HID_GREENASIA is not set
-+# CONFIG_HID_SMARTJOYPLUS is not set
- # CONFIG_HID_TOPSEED is not set
--# CONFIG_THRUSTMASTER_FF is not set
--# CONFIG_ZEROPLUS_FF is not set
-+# CONFIG_HID_THRUSTMASTER is not set
-+# CONFIG_HID_ZEROPLUS is not set
-+# CONFIG_HID_ZYDACRON is not set
- CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
-@@ -1105,7 +1273,6 @@ CONFIG_USB=y
- CONFIG_USB_DEVICEFS=y
- # CONFIG_USB_DEVICE_CLASS is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
--CONFIG_USB_SUSPEND=y
- CONFIG_USB_OTG=y
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-@@ -1117,26 +1284,25 @@ CONFIG_USB_OTG=y
- # USB Host Controller Drivers
- #
- # CONFIG_USB_C67X00_HCD is not set
-+# CONFIG_USB_XHCI_HCD is not set
- CONFIG_USB_EHCI_HCD=m
- CONFIG_USB_EHCI_ROOT_HUB_TT=y
- # CONFIG_USB_EHCI_TT_NEWSCHED is not set
- CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
- CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
- CONFIG_USB_EHCI_FSL=y
-+CONFIG_USB_M5445X_ULPI=y
-+# CONFIG_USB_M5445X_FSLS is not set
- # CONFIG_USB_OXU210HP_HCD is not set
- # CONFIG_USB_ISP116X_HCD is not set
- # CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_ISP1362_HCD is not set
- # CONFIG_USB_OHCI_HCD is not set
- # CONFIG_USB_UHCI_HCD is not set
- # CONFIG_USB_SL811_HCD is not set
- # CONFIG_USB_R8A66597_HCD is not set
- # CONFIG_USB_WHCI_HCD is not set
- # CONFIG_USB_HWA_HCD is not set
--CONFIG_USB_M5445X_ULPI=y
--# CONFIG_USB_M5445X_FSLS is not set
--# CONFIG_USB_M5441X_ULPI is not set
--# CONFIG_USB_M5441X_FSLS is not set
--# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # USB Device Class drivers
-@@ -1147,11 +1313,11 @@ CONFIG_USB_M5445X_ULPI=y
- # CONFIG_USB_TMC is not set
-
- #
--# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
- #
-
- #
--# see USB_STORAGE Help for more information
-+# also be needed; see USB_STORAGE Help for more info
- #
- CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_DEBUG is not set
-@@ -1166,6 +1332,7 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_ONETOUCH is not set
- # CONFIG_USB_STORAGE_KARMA is not set
- # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_UAS is not set
- # CONFIG_USB_LIBUSUAL is not set
-
- #
-@@ -1189,11 +1356,9 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
--# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
- # CONFIG_USB_FTDI_ELAN is not set
- # CONFIG_USB_APPLEDISPLAY is not set
-@@ -1203,57 +1368,65 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
- # CONFIG_USB_ISIGHTFW is not set
--# CONFIG_USB_VST is not set
-+# CONFIG_USB_YUREX is not set
- CONFIG_USB_GADGET=m
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_VBUS_DRAW=2
- CONFIG_USB_GADGET_SELECTED=y
--# CONFIG_USB_GADGET_AT91 is not set
--# CONFIG_USB_GADGET_ATMEL_USBA is not set
- CONFIG_USB_GADGET_FSL_USB2=y
- CONFIG_USB_FSL_USB2=m
--# CONFIG_USB_GADGET_LH7A40X is not set
--# CONFIG_USB_GADGET_OMAP is not set
--# CONFIG_USB_GADGET_PXA25X is not set
--# CONFIG_USB_GADGET_PXA27X is not set
--# CONFIG_USB_GADGET_S3C2410 is not set
--# CONFIG_USB_GADGET_IMX is not set
-+# CONFIG_USB_GADGET_R8A66597 is not set
-+# CONFIG_USB_GADGET_PXA_U2O is not set
- # CONFIG_USB_GADGET_M66592 is not set
- # CONFIG_USB_GADGET_AMD5536UDC is not set
--# CONFIG_USB_GADGET_FSL_QE is not set
--# CONFIG_USB_GADGET_CI13XXX is not set
-+# CONFIG_USB_GADGET_CI13XXX_PCI is not set
- # CONFIG_USB_GADGET_NET2280 is not set
- # CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LANGWELL is not set
-+# CONFIG_USB_GADGET_EG20T is not set
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
- CONFIG_USB_GADGET_DUALSPEED=y
- # CONFIG_USB_ZERO is not set
-+# CONFIG_USB_AUDIO is not set
- CONFIG_USB_ETH=m
- CONFIG_USB_ETH_RNDIS=y
-+# CONFIG_USB_ETH_EEM is not set
-+# CONFIG_USB_G_NCM is not set
- # CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FUNCTIONFS is not set
- CONFIG_USB_FILE_STORAGE=m
- # CONFIG_USB_FILE_STORAGE_TEST is not set
-+# CONFIG_USB_MASS_STORAGE is not set
- # CONFIG_USB_G_SERIAL is not set
- # CONFIG_USB_MIDI_GADGET is not set
- # CONFIG_USB_G_PRINTER is not set
- # CONFIG_USB_CDC_COMPOSITE is not set
-+# CONFIG_USB_G_MULTI is not set
-+# CONFIG_USB_G_HID is not set
-+# CONFIG_USB_G_DBGP is not set
-
- #
- # OTG and related infrastructure
- #
-+# CONFIG_NOP_USB_XCEIV is not set
- # CONFIG_UWB is not set
- # CONFIG_MMC is not set
- # CONFIG_MEMSTICK is not set
- # CONFIG_NEW_LEDS is not set
-+# CONFIG_NFC_DEVICES is not set
- # CONFIG_ACCESSIBILITY is not set
- # CONFIG_INFINIBAND is not set
- # CONFIG_RTC_CLASS is not set
- CONFIG_DMADEVICES=y
-+# CONFIG_DMADEVICES_DEBUG is not set
-
- #
- # DMA Devices
- #
- CONFIG_COLDFIRE_EDMA=y
- CONFIG_COLDFIRE_EDMA_TEST=m
-+# CONFIG_TIMB_DMA is not set
-+# CONFIG_AUXDISPLAY is not set
- # CONFIG_UIO is not set
- # CONFIG_STAGING is not set
-
-@@ -1272,6 +1445,7 @@ CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
-+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
- CONFIG_EXT3_FS_XATTR=y
- # CONFIG_EXT3_FS_POSIX_ACL is not set
- # CONFIG_EXT3_FS_SECURITY is not set
-@@ -1280,21 +1454,27 @@ CONFIG_JBD=y
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--# CONFIG_FS_POSIX_ACL is not set
--CONFIG_FILE_LOCKING=y
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
--# CONFIG_OCFS2_FS is not set
- # CONFIG_BTRFS_FS is not set
-+# CONFIG_NILFS2_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+CONFIG_FSNOTIFY=y
- CONFIG_DNOTIFY=y
--CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
-+# CONFIG_FANOTIFY is not set
- # CONFIG_QUOTA is not set
--# CONFIG_AUTOFS_FS is not set
-+# CONFIG_QUOTACTL is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-
- #
-+# Caches
-+#
-+# CONFIG_FSCACHE is not set
-+
-+#
- # CD-ROM/DVD Filesystems
- #
- # CONFIG_ISO9660_FS is not set
-@@ -1332,6 +1512,7 @@ CONFIG_MISC_FILESYSTEMS=y
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
-+# CONFIG_YAFFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
- CONFIG_JFFS2_FS_WRITEBUFFER=y
-@@ -1343,6 +1524,7 @@ CONFIG_JFFS2_ZLIB=y
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_LOGFS is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_SQUASHFS is not set
- # CONFIG_VXFS_FS is not set
-@@ -1364,10 +1546,8 @@ CONFIG_LOCKD=y
- CONFIG_LOCKD_V4=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
--# CONFIG_SUNRPC_REGISTER_V4 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
--# CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
-+# CONFIG_CEPH_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-@@ -1434,7 +1614,6 @@ CONFIG_NLS_ISO8859_1=y
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=y
--# CONFIG_DLM is not set
-
- #
- # Kernel hacking
-@@ -1444,19 +1623,18 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
- # CONFIG_ENABLE_MUST_CHECK is not set
- CONFIG_FRAME_WARN=1024
- # CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_STRIP_ASM_SYMS is not set
- # CONFIG_UNUSED_SYMBOLS is not set
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- # CONFIG_DEBUG_KERNEL is not set
--# CONFIG_DEBUG_BUGVERBOSE is not set
-+# CONFIG_HARDLOCKUP_DETECTOR is not set
-+CONFIG_BKL=y
-+# CONFIG_SPARSE_RCU_POINTER is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_MEMORY_INIT is not set
--# CONFIG_RCU_CPU_STALL_DETECTOR is not set
- # CONFIG_SYSCTL_SYSCALL_CHECK is not set
--
--#
--# Tracers
--#
--# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_ATOMIC64_SELFTEST is not set
- # CONFIG_SAMPLES is not set
- # CONFIG_BOOTPARAM is not set
-
-@@ -1464,15 +1642,16 @@ CONFIG_FRAME_WARN=1024
- # Security options
- #
- # CONFIG_KEYS is not set
-+# CONFIG_SECURITY_DMESG_RESTRICT is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITYFS is not set
--# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_DEFAULT_SECURITY_DAC=y
-+CONFIG_DEFAULT_SECURITY=""
- CONFIG_CRYPTO=y
-
- #
- # Crypto core or helper
- #
--# CONFIG_CRYPTO_FIPS is not set
- CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_ALGAPI2=y
- CONFIG_CRYPTO_AEAD=y
-@@ -1482,10 +1661,13 @@ CONFIG_CRYPTO_BLKCIPHER2=y
- CONFIG_CRYPTO_HASH=y
- CONFIG_CRYPTO_HASH2=y
- CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_PCOMP2=y
- CONFIG_CRYPTO_MANAGER=y
- CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
- # CONFIG_CRYPTO_GF128MUL is not set
- # CONFIG_CRYPTO_NULL is not set
-+CONFIG_CRYPTO_WORKQUEUE=y
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_AUTHENC=y
- CONFIG_CRYPTO_TEST=m
-@@ -1513,11 +1695,13 @@ CONFIG_CRYPTO_PCBC=m
- #
- CONFIG_CRYPTO_HMAC=y
- # CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_VMAC is not set
-
- #
- # Digest
- #
- CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_GHASH is not set
- # CONFIG_CRYPTO_MD4 is not set
- CONFIG_CRYPTO_MD5=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
-@@ -1554,20 +1738,15 @@ CONFIG_CRYPTO_DES=y
- # Compression
- #
- # CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_ZLIB is not set
- # CONFIG_CRYPTO_LZO is not set
-
- #
- # Random Number Generation
- #
- # CONFIG_CRYPTO_ANSI_CPRNG is not set
--
--#
--# OCF Configuration
--#
--
--#
--# Talitos Driver
--#
-+# CONFIG_CRYPTO_USER_API_HASH is not set
-+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
- CONFIG_CRYPTO_HW=y
- CONFIG_CRYPTO_DEV_MCFCAU=y
- CONFIG_CRYPTO_DEV_MCFCAU_DES=y
-@@ -1575,6 +1754,7 @@ CONFIG_CRYPTO_DEV_MCFCAU_AES=y
- CONFIG_CRYPTO_DEV_MCFCAU_MD5=y
- CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y
- # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-+# CONFIG_BINARY_PRINTF is not set
-
- #
- # Library routines
-@@ -1590,8 +1770,12 @@ CONFIG_CRC32=y
- CONFIG_LIBCRC32C=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+# CONFIG_XZ_DEC is not set
-+# CONFIG_XZ_DEC_BCJ is not set
-+CONFIG_DECOMPRESS_GZIP=y
- CONFIG_GENERIC_ALLOCATOR=y
--CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
-+CONFIG_NLATTR=y
-+CONFIG_GENERIC_ATOMIC64=y
---- a/arch/m68k/configs/m5474lite_defconfig
-+++ b/arch/m68k/configs/m5474lite_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.29
--# Tue Aug 24 16:17:48 2010
-+# Linux kernel version: 2.6.38
-+# Tue Aug 2 16:38:35 2011
- #
- CONFIG_M68K=y
- CONFIG_MMU=y
-@@ -17,7 +17,9 @@ CONFIG_GENERIC_IOMAP=y
- # CONFIG_NO_IOPORT is not set
- # CONFIG_NO_DMA is not set
- CONFIG_HZ=100
-+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+CONFIG_CONSTRUCTORS=y
-
- #
- # General setup
-@@ -25,6 +27,7 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNA
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_CROSS_COMPILE=""
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- CONFIG_SWAP=y
-@@ -34,37 +37,34 @@ CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_AUDIT is not set
-+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-
- #
- # RCU Subsystem
- #
--CONFIG_CLASSIC_RCU=y
--# CONFIG_TREE_RCU is not set
-+CONFIG_TINY_RCU=y
- # CONFIG_PREEMPT_RCU is not set
-+# CONFIG_RCU_TRACE is not set
- # CONFIG_TREE_RCU_TRACE is not set
--# CONFIG_PREEMPT_RCU_TRACE is not set
- CONFIG_IKCONFIG=y
- CONFIG_IKCONFIG_PROC=y
- CONFIG_LOG_BUF_SHIFT=17
--CONFIG_GROUP_SCHED=y
--CONFIG_FAIR_GROUP_SCHED=y
--# CONFIG_RT_GROUP_SCHED is not set
--CONFIG_USER_SCHED=y
--# CONFIG_CGROUP_SCHED is not set
- # CONFIG_CGROUPS is not set
--CONFIG_SYSFS_DEPRECATED=y
--CONFIG_SYSFS_DEPRECATED_V2=y
--# CONFIG_RELAY is not set
- CONFIG_NAMESPACES=y
- # CONFIG_UTS_NS is not set
- # CONFIG_IPC_NS is not set
- # CONFIG_USER_NS is not set
- # CONFIG_PID_NS is not set
- # CONFIG_NET_NS is not set
-+# CONFIG_SCHED_AUTOGROUP is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
- # CONFIG_BLK_DEV_INITRD is not set
- # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
- CONFIG_ANON_INODES=y
-+# CONFIG_EXPERT is not set
- # CONFIG_EMBEDDED is not set
- CONFIG_UID16=y
- CONFIG_SYSCTL_SYSCALL=y
-@@ -82,13 +82,20 @@ CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_AIO=y
-+
-+#
-+# Kernel Performance Events And Counters
-+#
- CONFIG_VM_EVENT_COUNTERS=y
- CONFIG_PCI_QUIRKS=y
- CONFIG_COMPAT_BRK=y
- CONFIG_SLAB=y
- # CONFIG_SLUB is not set
--# CONFIG_SLOB is not set
- # CONFIG_PROFILING is not set
-+
-+#
-+# GCOV-based kernel profiling
-+#
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
-@@ -100,8 +107,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_BLOCK=y
--CONFIG_LBD=y
--# CONFIG_BLK_DEV_IO_TRACE is not set
-+CONFIG_LBDAF=y
- # CONFIG_BLK_DEV_BSG is not set
- # CONFIG_BLK_DEV_INTEGRITY is not set
-
-@@ -109,14 +115,41 @@ CONFIG_LBD=y
- # IO Schedulers
- #
- CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
- CONFIG_IOSCHED_DEADLINE=y
- CONFIG_IOSCHED_CFQ=y
--# CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_INLINE_SPIN_TRYLOCK is not set
-+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK is not set
-+# CONFIG_INLINE_SPIN_LOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_SPIN_UNLOCK=y
-+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_READ_TRYLOCK is not set
-+# CONFIG_INLINE_READ_LOCK is not set
-+# CONFIG_INLINE_READ_LOCK_BH is not set
-+# CONFIG_INLINE_READ_LOCK_IRQ is not set
-+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_READ_UNLOCK=y
-+# CONFIG_INLINE_READ_UNLOCK_BH is not set
-+CONFIG_INLINE_READ_UNLOCK_IRQ=y
-+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_WRITE_TRYLOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK_BH is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_WRITE_UNLOCK=y
-+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
- # CONFIG_FREEZER is not set
-
- #
-@@ -180,18 +213,19 @@ CONFIG_SINGLE_MEMORY_CHUNK=y
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
- CONFIG_SELECT_MEMORY_MODEL=y
- CONFIG_FLATMEM_MANUAL=y
--# CONFIG_DISCONTIGMEM_MANUAL is not set
--# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- CONFIG_NEED_MULTIPLE_NODES=y
- CONFIG_PAGEFLAGS_EXTENDED=y
- CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_COMPACTION is not set
- # CONFIG_PHYS_ADDR_T_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
- CONFIG_BOUNCE=y
- CONFIG_VIRT_TO_BUS=y
--CONFIG_UNEVICTABLE_LRU=y
-+# CONFIG_KSM is not set
-+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-+CONFIG_NEED_PER_CPU_KM=y
-
- #
- # General setup
-@@ -204,8 +238,8 @@ CONFIG_HAVE_AOUT=y
- CONFIG_PROC_HARDWARE=y
- CONFIG_ZONE_DMA=y
- # CONFIG_ARCH_SUPPORTS_MSI is not set
--CONFIG_PCI_LEGACY=y
- # CONFIG_PCI_STUB is not set
-+# CONFIG_PCI_IOV is not set
-
- #
- # Power management options
-@@ -216,9 +250,7 @@ CONFIG_NET=y
- #
- # Networking options
- #
--CONFIG_COMPAT_NET_DEV_OPS=y
- CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
-@@ -241,7 +273,7 @@ CONFIG_IP_PNP=y
- # CONFIG_IP_PNP_BOOTP is not set
- # CONFIG_IP_PNP_RARP is not set
- # CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+# CONFIG_NET_IPGRE_DEMUX is not set
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
- CONFIG_INET_AH=y
-@@ -261,11 +293,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
-+# CONFIG_RDS is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
-+# CONFIG_L2TP is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_NET_DSA is not set
- # CONFIG_VLAN_8021Q is not set
-@@ -277,8 +312,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
-+# CONFIG_PHONET is not set
-+# CONFIG_IEEE802154 is not set
- # CONFIG_NET_SCHED is not set
- # CONFIG_DCB is not set
-+# CONFIG_BATMAN_ADV is not set
-
- #
- # Network testing
-@@ -293,23 +331,28 @@ CONFIG_CAN_RAW=y
- # CAN Device Drivers
- #
- # CONFIG_CAN_VCAN is not set
-+# CONFIG_CAN_SLCAN is not set
- # CONFIG_CAN_DEV is not set
--CONFIG_CAN_FLEXCAN=y
- # CONFIG_CAN_DEBUG_DEVICES is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
--# CONFIG_PHONET is not set
- CONFIG_WIRELESS=y
- # CONFIG_CFG80211 is not set
--CONFIG_WIRELESS_OLD_REGULATORY=y
--# CONFIG_WIRELESS_EXT is not set
- # CONFIG_LIB80211 is not set
--# CONFIG_MAC80211 is not set
-+
-+#
-+# CFG80211 needs to be enabled for MAC80211
-+#
-+
-+#
-+# Some wireless drivers require a rate control algorithm
-+#
- # CONFIG_WIMAX is not set
- # CONFIG_RFKILL is not set
- # CONFIG_NET_9P is not set
--# CONFIG_KLIPS is not set
-+# CONFIG_CAIF is not set
-+# CONFIG_CEPH_LIB is not set
-
- #
- # Device Drivers
-@@ -319,6 +362,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
- # Generic Driver Options
- #
- CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_DEVTMPFS is not set
- # CONFIG_STANDALONE is not set
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- CONFIG_FW_LOADER=y
-@@ -328,9 +372,9 @@ CONFIG_EXTRA_FIRMWARE=""
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_TESTS is not set
- CONFIG_MTD_CONCAT=y
- CONFIG_MTD_PARTITIONS=y
--# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_REDBOOT_PARTS is not set
- CONFIG_MTD_CMDLINE_PARTS=y
- # CONFIG_MTD_AR7_PARTS is not set
-@@ -346,6 +390,7 @@ CONFIG_MTD_BLOCK=y
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_SM_FTL is not set
- # CONFIG_MTD_OOPS is not set
-
- #
-@@ -407,10 +452,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- # LPDDR flash memory drivers
- #
- # CONFIG_MTD_LPDDR is not set
--
--#
--# UBI - Unsorted block images
--#
- # CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
-@@ -421,6 +462,10 @@ CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+
-+#
-+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-+#
- # CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_SX8 is not set
- CONFIG_BLK_DEV_RAM=y
-@@ -430,13 +475,26 @@ CONFIG_BLK_DEV_RAM_SIZE=64000
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- # CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_RBD is not set
- CONFIG_MISC_DEVICES=y
-+# CONFIG_AD525X_DPOT is not set
- # CONFIG_PHANTOM is not set
- # CONFIG_SGI_IOC4 is not set
- # CONFIG_TIFM_CORE is not set
- # CONFIG_ICS932S401 is not set
- # CONFIG_ENCLOSURE_SERVICES is not set
- # CONFIG_HP_ILO is not set
-+# CONFIG_APDS9802ALS is not set
-+# CONFIG_ISL29003 is not set
-+# CONFIG_ISL29020 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_SENSORS_BH1780 is not set
-+# CONFIG_SENSORS_BH1770 is not set
-+# CONFIG_SENSORS_APDS990X is not set
-+# CONFIG_HMC6352 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_BMP085 is not set
-+# CONFIG_PCH_PHUB is not set
- # CONFIG_C2PORT is not set
-
- #
-@@ -444,7 +502,13 @@ CONFIG_MISC_DEVICES=y
- #
- # CONFIG_EEPROM_AT24 is not set
- # CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_MAX6875 is not set
- # CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_CB710_CORE is not set
-+
-+#
-+# Texas Instruments shared transport line discipline
-+#
- CONFIG_HAVE_IDE=y
- CONFIG_IDE=y
-
-@@ -498,6 +562,7 @@ CONFIG_IDE_PROC_FS=y
- #
- # SCSI device support
- #
-+CONFIG_SCSI_MOD=y
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
- CONFIG_SCSI_DMA=y
-@@ -514,10 +579,6 @@ CONFIG_BLK_DEV_SD=y
- # CONFIG_BLK_DEV_SR is not set
- # CONFIG_CHR_DEV_SG is not set
- # CONFIG_CHR_DEV_SCH is not set
--
--#
--# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
--#
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-@@ -530,81 +591,113 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
- # CONFIG_SCSI_SRP_ATTRS is not set
- # CONFIG_SCSI_LOWLEVEL is not set
- # CONFIG_SCSI_DH is not set
-+# CONFIG_SCSI_OSD_INITIATOR is not set
- CONFIG_ATA=y
- # CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_ATA_VERBOSE_ERROR=y
- CONFIG_SATA_PMP=y
-+
-+#
-+# Controllers with non-SFF native interface
-+#
- # CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_AHCI_PLATFORM is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_SATA_ACARD_AHCI is not set
- CONFIG_SATA_SIL24=y
- CONFIG_ATA_SFF=y
--# CONFIG_SATA_SVW is not set
-+
-+#
-+# SFF controllers with custom DMA interface
-+#
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_SX4 is not set
-+CONFIG_ATA_BMDMA=y
-+
-+#
-+# SATA SFF controllers with BMDMA
-+#
- # CONFIG_ATA_PIIX is not set
- # CONFIG_SATA_MV is not set
- # CONFIG_SATA_NV is not set
--# CONFIG_PDC_ADMA is not set
--# CONFIG_SATA_QSTOR is not set
- # CONFIG_SATA_PROMISE is not set
--# CONFIG_SATA_SX4 is not set
- CONFIG_SATA_SIL=y
- # CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_SVW is not set
- # CONFIG_SATA_ULI is not set
- # CONFIG_SATA_VIA is not set
- # CONFIG_SATA_VITESSE is not set
--# CONFIG_SATA_INIC162X is not set
-+
-+#
-+# PATA SFF controllers with BMDMA
-+#
- # CONFIG_PATA_ALI is not set
- # CONFIG_PATA_AMD is not set
- # CONFIG_PATA_ARTOP is not set
- # CONFIG_PATA_ATIIXP is not set
--# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_ATP867X is not set
- # CONFIG_PATA_CMD64X is not set
- # CONFIG_PATA_CS5520 is not set
- # CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CS5536 is not set
- # CONFIG_PATA_CYPRESS is not set
- # CONFIG_PATA_EFAR is not set
--# CONFIG_ATA_GENERIC is not set
- # CONFIG_PATA_HPT366 is not set
- # CONFIG_PATA_HPT37X is not set
- # CONFIG_PATA_HPT3X2N is not set
- # CONFIG_PATA_HPT3X3 is not set
--# CONFIG_PATA_IT821X is not set
- # CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_IT821X is not set
- # CONFIG_PATA_JMICRON is not set
--# CONFIG_PATA_TRIFLEX is not set
- # CONFIG_PATA_MARVELL is not set
--# CONFIG_PATA_MPIIX is not set
--# CONFIG_PATA_OLDPIIX is not set
- # CONFIG_PATA_NETCELL is not set
- # CONFIG_PATA_NINJA32 is not set
--# CONFIG_PATA_NS87410 is not set
- # CONFIG_PATA_NS87415 is not set
--# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OLDPIIX is not set
- # CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC2027X is not set
- # CONFIG_PATA_PDC_OLD is not set
- # CONFIG_PATA_RADISYS is not set
--# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_RDC is not set
- # CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SCH is not set
- # CONFIG_PATA_SERVERWORKS is not set
--# CONFIG_PATA_PDC2027X is not set
- # CONFIG_PATA_SIL680 is not set
- # CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_TOSHIBA is not set
-+# CONFIG_PATA_TRIFLEX is not set
- # CONFIG_PATA_VIA is not set
- # CONFIG_PATA_WINBOND is not set
--# CONFIG_PATA_SCH is not set
--# CONFIG_MD is not set
--# CONFIG_FUSION is not set
-
- #
--# IEEE 1394 (FireWire) support
-+# PIO-only SFF controllers
-+#
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_RZ1000 is not set
-+
- #
-+# Generic fallback / legacy drivers
-+#
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_LEGACY is not set
-+# CONFIG_MD is not set
-+# CONFIG_TARGET_CORE is not set
-+# CONFIG_FUSION is not set
-
- #
--# Enable only one of the two stacks, unless you know what you are doing
-+# IEEE 1394 (FireWire) support
- #
- # CONFIG_FIREWIRE is not set
--# CONFIG_IEEE1394 is not set
-+# CONFIG_FIREWIRE_NOSY is not set
- # CONFIG_I2O is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
-@@ -614,6 +707,7 @@ CONFIG_NETDEVICES=y
- # CONFIG_TUN is not set
- # CONFIG_VETH is not set
- # CONFIG_ARCNET is not set
-+CONFIG_MII=y
- CONFIG_PHYLIB=y
-
- #
-@@ -628,22 +722,24 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- CONFIG_BROADCOM5222_PHY=y
-+# CONFIG_BCM63XX_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
- # CONFIG_REALTEK_PHY is not set
- # CONFIG_NATIONAL_PHY is not set
- # CONFIG_NATIONAL8364x_PHY is not set
- # CONFIG_NATIONAL8384x_PHY is not set
--# CONFIG_MicrelKSZ8041_PHY is not set
- # CONFIG_STE10XP is not set
- # CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_MICREL_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
- # CONFIG_HAPPYMEAL is not set
- # CONFIG_SUNGEM is not set
- # CONFIG_CASSINI is not set
- # CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_ETHOC is not set
- # CONFIG_DNET is not set
- # CONFIG_NET_TULIP is not set
- # CONFIG_HP100 is not set
-@@ -658,6 +754,7 @@ CONFIG_NET_PCI=y
- # CONFIG_PCNET32 is not set
- # CONFIG_AMD8111_ETH is not set
- # CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_KSZ884X_PCI is not set
- # CONFIG_B44 is not set
- # CONFIG_FORCEDETH is not set
- CONFIG_E100=y
-@@ -676,6 +773,7 @@ CONFIG_8139TOO_PIO=y
- # CONFIG_SMSC9420 is not set
- # CONFIG_SUNDANCE is not set
- # CONFIG_TLAN is not set
-+# CONFIG_KS8851_MLL is not set
- # CONFIG_VIA_RHINE is not set
- # CONFIG_SC92031 is not set
- CONFIG_FEC_548x=y
-@@ -689,6 +787,7 @@ CONFIG_E1000=y
- # CONFIG_E1000E is not set
- # CONFIG_IP1000 is not set
- # CONFIG_IGB is not set
-+# CONFIG_IGBVF is not set
- # CONFIG_NS83820 is not set
- # CONFIG_HAMACHI is not set
- # CONFIG_YELLOWFIN is not set
-@@ -699,25 +798,29 @@ CONFIG_E1000=y
- # CONFIG_VIA_VELOCITY is not set
- # CONFIG_TIGON3 is not set
- # CONFIG_BNX2 is not set
-+# CONFIG_CNIC is not set
- # CONFIG_QLA3XXX is not set
- # CONFIG_ATL1 is not set
- # CONFIG_ATL1E is not set
- # CONFIG_ATL1C is not set
- # CONFIG_JME is not set
-+# CONFIG_STMMAC_ETH is not set
-+# CONFIG_PCH_GBE is not set
- # CONFIG_NETDEV_10000 is not set
- # CONFIG_TR is not set
-+CONFIG_WLAN=y
-+# CONFIG_ATMEL is not set
-+# CONFIG_PRISM54 is not set
-+# CONFIG_HOSTAP is not set
-
- #
--# Wireless LAN
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
- #
--# CONFIG_WLAN_PRE80211 is not set
--# CONFIG_WLAN_80211 is not set
--# CONFIG_IWLWIFI_LEDS is not set
-+# CONFIG_WAN is not set
-
- #
--# Enable WiMAX (Networking options) to see the WiMAX drivers
-+# CAIF transport drivers
- #
--# CONFIG_WAN is not set
- # CONFIG_FDDI is not set
- # CONFIG_HIPPI is not set
- # CONFIG_PPP is not set
-@@ -726,6 +829,7 @@ CONFIG_E1000=y
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_VMXNET3 is not set
- # CONFIG_ISDN is not set
- # CONFIG_PHONE is not set
-
-@@ -735,6 +839,7 @@ CONFIG_E1000=y
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- # CONFIG_INPUT_POLLDEV is not set
-+# CONFIG_INPUT_SPARSEKMAP is not set
-
- #
- # Userland interfaces
-@@ -751,12 +856,18 @@ CONFIG_INPUT_EVDEV=y
- # Input Device Drivers
- #
- CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ADP5588 is not set
- # CONFIG_KEYBOARD_ATKBD is not set
--# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_QT2160 is not set
- # CONFIG_KEYBOARD_LKKBD is not set
--# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_TCA6416 is not set
-+# CONFIG_KEYBOARD_MAX7359 is not set
-+# CONFIG_KEYBOARD_MCS is not set
- # CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_OPENCORES is not set
- # CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
- # CONFIG_INPUT_TABLET is not set
-@@ -770,6 +881,8 @@ CONFIG_SERIO=y
- CONFIG_SERIO_SERPORT=y
- # CONFIG_SERIO_PCIPS2 is not set
- # CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO_ALTERA_PS2 is not set
-+# CONFIG_SERIO_PS2MULT is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -782,6 +895,7 @@ CONFIG_HW_CONSOLE=y
- # CONFIG_VT_HW_CONSOLE_BINDING is not set
- CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_N_GSM is not set
- # CONFIG_NOZOMI is not set
-
- #
-@@ -792,6 +906,7 @@ CONFIG_DEVKMEM=y
- #
- # Non-8250 serial port support
- #
-+# CONFIG_SERIAL_MFD_HSU is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- # CONFIG_SERIAL_COLDFIRE_IRDA is not set
-@@ -800,19 +915,26 @@ CONFIG_SERIAL_MCF=y
- CONFIG_SERIAL_MCF_BAUDRATE=115200
- CONFIG_SERIAL_MCF_CONSOLE=y
- # CONFIG_SERIAL_JSM is not set
-+# CONFIG_SERIAL_TIMBERDALE is not set
-+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-+# CONFIG_SERIAL_ALTERA_UART is not set
- CONFIG_UNIX98_PTYS=y
- # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_HW_RANDOM is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
- # CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_APPLICOM is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-+# CONFIG_RAMOOPS is not set
- CONFIG_I2C=y
- CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_COMPAT=y
- # CONFIG_I2C_CHARDEV is not set
-+# CONFIG_I2C_MUX is not set
- CONFIG_I2C_HELPER_AUTO=y
-
- #
-@@ -840,9 +962,13 @@ CONFIG_I2C_HELPER_AUTO=y
- #
- # I2C system bus drivers (mostly embedded / system-on-chip)
- #
-+# CONFIG_I2C_INTEL_MID is not set
- CONFIG_I2C_MCF=y
- # CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_XILINX is not set
-+# CONFIG_I2C_EG20T is not set
-
- #
- # External I2C/SMBus adapter drivers
-@@ -851,36 +977,26 @@ CONFIG_I2C_MCF=y
- # CONFIG_I2C_TAOS_EVM is not set
-
- #
--# Graphics adapter I2C/DDC channel drivers
--#
--# CONFIG_I2C_VOODOO3 is not set
--
--#
- # Other I2C/SMBus bus drivers
- #
--# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_STUB is not set
--
--#
--# Miscellaneous I2C Chip support
--#
--# CONFIG_DS1682 is not set
--# CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_PCF8575 is not set
--# CONFIG_SENSORS_PCA9539 is not set
--# CONFIG_SENSORS_PCF8591 is not set
--# CONFIG_SENSORS_MAX6875 is not set
--# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
--# CONFIG_I2C_DEBUG_CHIP is not set
- # CONFIG_SPI is not set
-+
-+#
-+# PPS support
-+#
-+# CONFIG_PPS is not set
-+
-+#
-+# PPS generators support
-+#
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
- # CONFIG_THERMAL is not set
--# CONFIG_THERMAL_HWMON is not set
- # CONFIG_WATCHDOG is not set
- CONFIG_SSB_POSSIBLE=y
-
-@@ -888,40 +1004,33 @@ CONFIG_SSB_POSSIBLE=y
- # Sonics Silicon Backplane
- #
- # CONFIG_SSB is not set
--
--#
--# Multifunction device drivers
--#
-+CONFIG_MFD_SUPPORT=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_TPS6507X is not set
- # CONFIG_MFD_TMIO is not set
- # CONFIG_PMIC_DA903X is not set
-+# CONFIG_PMIC_ADP5520 is not set
- # CONFIG_MFD_WM8400 is not set
--# CONFIG_MFD_WM8350_I2C is not set
- # CONFIG_MFD_PCF50633 is not set
-+# CONFIG_ABX500_CORE is not set
-+# CONFIG_MFD_CS5535 is not set
-+# CONFIG_LPC_SCH is not set
-+# CONFIG_MFD_RDC321X is not set
-+# CONFIG_MFD_JANZ_CMODIO is not set
-+# CONFIG_MFD_VX855 is not set
-+# CONFIG_MFD_WL1273_CORE is not set
- # CONFIG_REGULATOR is not set
--
--#
--# Multimedia devices
--#
--
--#
--# Multimedia core support
--#
--# CONFIG_VIDEO_DEV is not set
--# CONFIG_DVB_CORE is not set
--# CONFIG_VIDEO_MEDIA is not set
--
--#
--# Multimedia drivers
--#
--CONFIG_DAB=y
-+# CONFIG_MEDIA_SUPPORT is not set
-
- #
- # Graphics support
- #
-+CONFIG_VGA_ARB=y
-+CONFIG_VGA_ARB_MAX_GPUS=16
- # CONFIG_DRM is not set
-+# CONFIG_STUB_POULSBO is not set
- # CONFIG_VGASTATE is not set
- CONFIG_VIDEO_OUTPUT_CONTROL=m
- # CONFIG_FB is not set
-@@ -943,10 +1052,12 @@ CONFIG_DUMMY_CONSOLE=y
- # CONFIG_MMC is not set
- # CONFIG_MEMSTICK is not set
- # CONFIG_NEW_LEDS is not set
-+# CONFIG_NFC_DEVICES is not set
- # CONFIG_ACCESSIBILITY is not set
- # CONFIG_INFINIBAND is not set
- # CONFIG_RTC_CLASS is not set
- # CONFIG_DMADEVICES is not set
-+# CONFIG_AUXDISPLAY is not set
- # CONFIG_UIO is not set
- # CONFIG_STAGING is not set
-
-@@ -965,6 +1076,7 @@ CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
-+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
- CONFIG_EXT3_FS_XATTR=y
- # CONFIG_EXT3_FS_POSIX_ACL is not set
- # CONFIG_EXT3_FS_SECURITY is not set
-@@ -973,20 +1085,27 @@ CONFIG_JBD=y
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--# CONFIG_FS_POSIX_ACL is not set
--CONFIG_FILE_LOCKING=y
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
--# CONFIG_OCFS2_FS is not set
- # CONFIG_BTRFS_FS is not set
-+# CONFIG_NILFS2_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+CONFIG_FSNOTIFY=y
- CONFIG_DNOTIFY=y
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_FANOTIFY is not set
- # CONFIG_QUOTA is not set
--# CONFIG_AUTOFS_FS is not set
-+# CONFIG_QUOTACTL is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-
- #
-+# Caches
-+#
-+# CONFIG_FSCACHE is not set
-+
-+#
- # CD-ROM/DVD Filesystems
- #
- # CONFIG_ISO9660_FS is not set
-@@ -1024,7 +1143,9 @@ CONFIG_MISC_FILESYSTEMS=y
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
-+# CONFIG_YAFFS_FS is not set
- # CONFIG_JFFS2_FS is not set
-+# CONFIG_LOGFS is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_SQUASHFS is not set
- # CONFIG_VXFS_FS is not set
-@@ -1033,6 +1154,10 @@ CONFIG_MINIX_FS=y
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
- CONFIG_ROMFS_FS=y
-+CONFIG_ROMFS_BACKED_BY_BLOCK=y
-+# CONFIG_ROMFS_BACKED_BY_MTD is not set
-+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-+CONFIG_ROMFS_ON_BLOCK=y
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1044,10 +1169,8 @@ CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
--# CONFIG_SUNRPC_REGISTER_V4 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
--# CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
-+# CONFIG_CEPH_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-@@ -1114,7 +1237,6 @@ CONFIG_NLS_ISO8859_1=y
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=y
--# CONFIG_DLM is not set
-
- #
- # Kernel hacking
-@@ -1124,19 +1246,18 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
- # CONFIG_ENABLE_MUST_CHECK is not set
- CONFIG_FRAME_WARN=1024
- # CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_STRIP_ASM_SYMS is not set
- # CONFIG_UNUSED_SYMBOLS is not set
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- # CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_HARDLOCKUP_DETECTOR is not set
-+CONFIG_BKL=y
-+# CONFIG_SPARSE_RCU_POINTER is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- CONFIG_DEBUG_MEMORY_INIT=y
--# CONFIG_RCU_CPU_STALL_DETECTOR is not set
- # CONFIG_SYSCTL_SYSCALL_CHECK is not set
--
--#
--# Tracers
--#
--# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_ATOMIC64_SELFTEST is not set
- # CONFIG_SAMPLES is not set
- # CONFIG_BOOTPARAM is not set
-
-@@ -1144,15 +1265,16 @@ CONFIG_DEBUG_MEMORY_INIT=y
- # Security options
- #
- # CONFIG_KEYS is not set
-+# CONFIG_SECURITY_DMESG_RESTRICT is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITYFS is not set
--# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_DEFAULT_SECURITY_DAC=y
-+CONFIG_DEFAULT_SECURITY=""
- CONFIG_CRYPTO=y
-
- #
- # Crypto core or helper
- #
--# CONFIG_CRYPTO_FIPS is not set
- CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_ALGAPI2=y
- CONFIG_CRYPTO_AEAD=y
-@@ -1162,10 +1284,13 @@ CONFIG_CRYPTO_BLKCIPHER2=y
- CONFIG_CRYPTO_HASH=y
- CONFIG_CRYPTO_HASH2=y
- CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_PCOMP2=y
- CONFIG_CRYPTO_MANAGER=y
- CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
- # CONFIG_CRYPTO_GF128MUL is not set
- # CONFIG_CRYPTO_NULL is not set
-+CONFIG_CRYPTO_WORKQUEUE=y
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_AUTHENC=y
- CONFIG_CRYPTO_TEST=m
-@@ -1193,11 +1318,13 @@ CONFIG_CRYPTO_CBC=y
- #
- CONFIG_CRYPTO_HMAC=y
- # CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_VMAC is not set
-
- #
- # Digest
- #
- CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_GHASH is not set
- # CONFIG_CRYPTO_MD4 is not set
- CONFIG_CRYPTO_MD5=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
-@@ -1234,22 +1361,17 @@ CONFIG_CRYPTO_DES=y
- # Compression
- #
- # CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_ZLIB is not set
- # CONFIG_CRYPTO_LZO is not set
-
- #
- # Random Number Generation
- #
- # CONFIG_CRYPTO_ANSI_CPRNG is not set
--
--#
--# OCF Configuration
--#
--# CONFIG_OCF_OCF is not set
--
--#
--# Talitos Driver
--#
-+# CONFIG_CRYPTO_USER_API_HASH is not set
-+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
- # CONFIG_CRYPTO_HW is not set
-+# CONFIG_BINARY_PRINTF is not set
-
- #
- # Library routines
-@@ -1263,7 +1385,10 @@ CONFIG_CRC16=y
- CONFIG_CRC32=y
- # CONFIG_CRC7 is not set
- CONFIG_LIBCRC32C=y
--CONFIG_PLIST=y
-+# CONFIG_XZ_DEC is not set
-+# CONFIG_XZ_DEC_BCJ is not set
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
-+CONFIG_NLATTR=y
-+CONFIG_GENERIC_ATOMIC64=y
---- a/arch/m68k/configs/m5475evb_defconfig
-+++ b/arch/m68k/configs/m5475evb_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.29
--# Tue Aug 24 15:41:10 2010
-+# Linux kernel version: 2.6.38
-+# Tue Aug 2 16:44:38 2011
- #
- CONFIG_M68K=y
- CONFIG_MMU=y
-@@ -17,7 +17,9 @@ CONFIG_GENERIC_IOMAP=y
- # CONFIG_NO_IOPORT is not set
- # CONFIG_NO_DMA is not set
- CONFIG_HZ=100
-+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+CONFIG_CONSTRUCTORS=y
-
- #
- # General setup
-@@ -25,6 +27,7 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNA
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_CROSS_COMPILE=""
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- CONFIG_SWAP=y
-@@ -34,38 +37,40 @@ CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_AUDIT is not set
-+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-
- #
- # RCU Subsystem
- #
--CONFIG_CLASSIC_RCU=y
--# CONFIG_TREE_RCU is not set
-+CONFIG_TINY_RCU=y
- # CONFIG_PREEMPT_RCU is not set
-+# CONFIG_RCU_TRACE is not set
- # CONFIG_TREE_RCU_TRACE is not set
--# CONFIG_PREEMPT_RCU_TRACE is not set
- CONFIG_IKCONFIG=y
- CONFIG_IKCONFIG_PROC=y
- CONFIG_LOG_BUF_SHIFT=17
--CONFIG_GROUP_SCHED=y
--CONFIG_FAIR_GROUP_SCHED=y
--# CONFIG_RT_GROUP_SCHED is not set
--CONFIG_USER_SCHED=y
--# CONFIG_CGROUP_SCHED is not set
- # CONFIG_CGROUPS is not set
--CONFIG_SYSFS_DEPRECATED=y
--CONFIG_SYSFS_DEPRECATED_V2=y
--# CONFIG_RELAY is not set
- CONFIG_NAMESPACES=y
- # CONFIG_UTS_NS is not set
- # CONFIG_IPC_NS is not set
- # CONFIG_USER_NS is not set
- # CONFIG_PID_NS is not set
- # CONFIG_NET_NS is not set
-+# CONFIG_SCHED_AUTOGROUP is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_RD_GZIP=y
-+CONFIG_RD_BZIP2=y
-+CONFIG_RD_LZMA=y
-+CONFIG_RD_XZ=y
-+CONFIG_RD_LZO=y
- # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
- CONFIG_ANON_INODES=y
-+# CONFIG_EXPERT is not set
- # CONFIG_EMBEDDED is not set
- CONFIG_UID16=y
- CONFIG_SYSCTL_SYSCALL=y
-@@ -83,13 +88,20 @@ CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_AIO=y
-+
-+#
-+# Kernel Performance Events And Counters
-+#
- CONFIG_VM_EVENT_COUNTERS=y
- CONFIG_PCI_QUIRKS=y
- CONFIG_COMPAT_BRK=y
- CONFIG_SLAB=y
- # CONFIG_SLUB is not set
--# CONFIG_SLOB is not set
- # CONFIG_PROFILING is not set
-+
-+#
-+# GCOV-based kernel profiling
-+#
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
-@@ -101,8 +113,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_BLOCK=y
--CONFIG_LBD=y
--# CONFIG_BLK_DEV_IO_TRACE is not set
-+CONFIG_LBDAF=y
- # CONFIG_BLK_DEV_BSG is not set
- # CONFIG_BLK_DEV_INTEGRITY is not set
-
-@@ -110,14 +121,41 @@ CONFIG_LBD=y
- # IO Schedulers
- #
- CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
- CONFIG_IOSCHED_DEADLINE=y
- CONFIG_IOSCHED_CFQ=y
--# CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_INLINE_SPIN_TRYLOCK is not set
-+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK is not set
-+# CONFIG_INLINE_SPIN_LOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_SPIN_UNLOCK=y
-+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_READ_TRYLOCK is not set
-+# CONFIG_INLINE_READ_LOCK is not set
-+# CONFIG_INLINE_READ_LOCK_BH is not set
-+# CONFIG_INLINE_READ_LOCK_IRQ is not set
-+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_READ_UNLOCK=y
-+# CONFIG_INLINE_READ_UNLOCK_BH is not set
-+CONFIG_INLINE_READ_UNLOCK_IRQ=y
-+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_WRITE_TRYLOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK_BH is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_WRITE_UNLOCK=y
-+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
- # CONFIG_FREEZER is not set
-
- #
-@@ -181,18 +219,19 @@ CONFIG_SINGLE_MEMORY_CHUNK=y
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
- CONFIG_SELECT_MEMORY_MODEL=y
- CONFIG_FLATMEM_MANUAL=y
--# CONFIG_DISCONTIGMEM_MANUAL is not set
--# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- CONFIG_NEED_MULTIPLE_NODES=y
- CONFIG_PAGEFLAGS_EXTENDED=y
- CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_COMPACTION is not set
- # CONFIG_PHYS_ADDR_T_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
- CONFIG_BOUNCE=y
- CONFIG_VIRT_TO_BUS=y
--CONFIG_UNEVICTABLE_LRU=y
-+# CONFIG_KSM is not set
-+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-+CONFIG_NEED_PER_CPU_KM=y
-
- #
- # General setup
-@@ -205,8 +244,8 @@ CONFIG_HAVE_AOUT=y
- CONFIG_PROC_HARDWARE=y
- CONFIG_ZONE_DMA=y
- # CONFIG_ARCH_SUPPORTS_MSI is not set
--CONFIG_PCI_LEGACY=y
- # CONFIG_PCI_STUB is not set
-+# CONFIG_PCI_IOV is not set
-
- #
- # Power management options
-@@ -217,9 +256,7 @@ CONFIG_NET=y
- #
- # Networking options
- #
--CONFIG_COMPAT_NET_DEV_OPS=y
- CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
-@@ -242,7 +279,7 @@ CONFIG_IP_PNP=y
- # CONFIG_IP_PNP_BOOTP is not set
- # CONFIG_IP_PNP_RARP is not set
- # CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+# CONFIG_NET_IPGRE_DEMUX is not set
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
- CONFIG_INET_AH=y
-@@ -262,11 +299,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
-+# CONFIG_RDS is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
-+# CONFIG_L2TP is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_NET_DSA is not set
- # CONFIG_VLAN_8021Q is not set
-@@ -278,8 +318,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
-+# CONFIG_PHONET is not set
-+# CONFIG_IEEE802154 is not set
- # CONFIG_NET_SCHED is not set
- # CONFIG_DCB is not set
-+# CONFIG_BATMAN_ADV is not set
-
- #
- # Network testing
-@@ -294,23 +337,69 @@ CONFIG_CAN_RAW=y
- # CAN Device Drivers
- #
- # CONFIG_CAN_VCAN is not set
-+# CONFIG_CAN_SLCAN is not set
- # CONFIG_CAN_DEV is not set
--# CONFIG_CAN_FLEXCAN is not set
- # CONFIG_CAN_DEBUG_DEVICES is not set
--# CONFIG_IRDA is not set
-+CONFIG_IRDA=y
-+
-+#
-+# IrDA protocols
-+#
-+# CONFIG_IRLAN is not set
-+CONFIG_IRNET=y
-+CONFIG_IRCOMM=y
-+# CONFIG_IRDA_ULTRA is not set
-+
-+#
-+# IrDA options
-+#
-+CONFIG_IRDA_CACHE_LAST_LSAP=y
-+# CONFIG_IRDA_FAST_RR is not set
-+# CONFIG_IRDA_DEBUG is not set
-+
-+#
-+# Infrared-port device drivers
-+#
-+
-+#
-+# SIR device drivers
-+#
-+CONFIG_IRTTY_SIR=y
-+
-+#
-+# Dongle support
-+#
-+# CONFIG_DONGLE is not set
-+# CONFIG_KINGSUN_DONGLE is not set
-+# CONFIG_KSDAZZLE_DONGLE is not set
-+# CONFIG_KS959_DONGLE is not set
-+
-+#
-+# FIR device drivers
-+#
-+# CONFIG_USB_IRDA is not set
-+# CONFIG_SIGMATEL_FIR is not set
-+# CONFIG_TOSHIBA_FIR is not set
-+# CONFIG_VLSI_FIR is not set
-+# CONFIG_MCS_FIR is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
--# CONFIG_PHONET is not set
- CONFIG_WIRELESS=y
- # CONFIG_CFG80211 is not set
--CONFIG_WIRELESS_OLD_REGULATORY=y
--# CONFIG_WIRELESS_EXT is not set
- # CONFIG_LIB80211 is not set
--# CONFIG_MAC80211 is not set
-+
-+#
-+# CFG80211 needs to be enabled for MAC80211
-+#
-+
-+#
-+# Some wireless drivers require a rate control algorithm
-+#
- # CONFIG_WIMAX is not set
- # CONFIG_RFKILL is not set
- # CONFIG_NET_9P is not set
--# CONFIG_KLIPS is not set
-+# CONFIG_CAIF is not set
-+# CONFIG_CEPH_LIB is not set
-
- #
- # Device Drivers
-@@ -320,6 +409,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
- # Generic Driver Options
- #
- CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_DEVTMPFS is not set
- # CONFIG_STANDALONE is not set
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- CONFIG_FW_LOADER=y
-@@ -329,9 +419,9 @@ CONFIG_EXTRA_FIRMWARE=""
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_CONCAT is not set
- CONFIG_MTD_PARTITIONS=y
--# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_REDBOOT_PARTS is not set
- CONFIG_MTD_CMDLINE_PARTS=y
- # CONFIG_MTD_AR7_PARTS is not set
-@@ -347,6 +437,7 @@ CONFIG_MTD_BLOCK=y
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_SM_FTL is not set
- # CONFIG_MTD_OOPS is not set
-
- #
-@@ -408,10 +499,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- # LPDDR flash memory drivers
- #
- # CONFIG_MTD_LPDDR is not set
--
--#
--# UBI - Unsorted block images
--#
- # CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
-@@ -422,6 +509,10 @@ CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+
-+#
-+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-+#
- # CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_SX8 is not set
- # CONFIG_BLK_DEV_UB is not set
-@@ -432,13 +523,26 @@ CONFIG_BLK_DEV_RAM_SIZE=64000
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- # CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_RBD is not set
- CONFIG_MISC_DEVICES=y
-+# CONFIG_AD525X_DPOT is not set
- # CONFIG_PHANTOM is not set
- # CONFIG_SGI_IOC4 is not set
- # CONFIG_TIFM_CORE is not set
- # CONFIG_ICS932S401 is not set
- # CONFIG_ENCLOSURE_SERVICES is not set
- # CONFIG_HP_ILO is not set
-+# CONFIG_APDS9802ALS is not set
-+# CONFIG_ISL29003 is not set
-+# CONFIG_ISL29020 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_SENSORS_BH1780 is not set
-+# CONFIG_SENSORS_BH1770 is not set
-+# CONFIG_SENSORS_APDS990X is not set
-+# CONFIG_HMC6352 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_BMP085 is not set
-+# CONFIG_PCH_PHUB is not set
- # CONFIG_C2PORT is not set
-
- #
-@@ -446,13 +550,20 @@ CONFIG_MISC_DEVICES=y
- #
- # CONFIG_EEPROM_AT24 is not set
- # CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_MAX6875 is not set
- # CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_CB710_CORE is not set
-+
-+#
-+# Texas Instruments shared transport line discipline
-+#
- CONFIG_HAVE_IDE=y
- # CONFIG_IDE is not set
-
- #
- # SCSI device support
- #
-+CONFIG_SCSI_MOD=y
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
- CONFIG_SCSI_DMA=y
-@@ -469,10 +580,6 @@ CONFIG_BLK_DEV_SD=y
- # CONFIG_BLK_DEV_SR is not set
- # CONFIG_CHR_DEV_SG is not set
- # CONFIG_CHR_DEV_SCH is not set
--
--#
--# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
--#
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-@@ -485,23 +592,22 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
- # CONFIG_SCSI_SRP_ATTRS is not set
- # CONFIG_SCSI_LOWLEVEL is not set
- # CONFIG_SCSI_DH is not set
-+# CONFIG_SCSI_OSD_INITIATOR is not set
- # CONFIG_ATA is not set
- # CONFIG_MD is not set
-+# CONFIG_TARGET_CORE is not set
- # CONFIG_FUSION is not set
-
- #
- # IEEE 1394 (FireWire) support
- #
--
--#
--# Enable only one of the two stacks, unless you know what you are doing
--#
- # CONFIG_FIREWIRE is not set
--# CONFIG_IEEE1394 is not set
-+# CONFIG_FIREWIRE_NOSY is not set
- # CONFIG_I2O is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
-@@ -511,6 +617,7 @@ CONFIG_NETDEVICES=y
- # CONFIG_TUN is not set
- # CONFIG_VETH is not set
- # CONFIG_ARCNET is not set
-+CONFIG_MII=y
- CONFIG_PHYLIB=y
-
- #
-@@ -525,22 +632,24 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- CONFIG_BROADCOM5222_PHY=y
-+# CONFIG_BCM63XX_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
- # CONFIG_REALTEK_PHY is not set
- # CONFIG_NATIONAL_PHY is not set
- # CONFIG_NATIONAL8364x_PHY is not set
- # CONFIG_NATIONAL8384x_PHY is not set
--# CONFIG_MicrelKSZ8041_PHY is not set
- # CONFIG_STE10XP is not set
- # CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_MICREL_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
- # CONFIG_HAPPYMEAL is not set
- # CONFIG_SUNGEM is not set
- # CONFIG_CASSINI is not set
- # CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_ETHOC is not set
- # CONFIG_DNET is not set
- # CONFIG_NET_TULIP is not set
- # CONFIG_HP100 is not set
-@@ -553,6 +662,7 @@ CONFIG_MII=y
- # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
- # CONFIG_NET_PCI is not set
- # CONFIG_B44 is not set
-+# CONFIG_KS8851_MLL is not set
- CONFIG_FEC_548x=y
- CONFIG_FEC_548x_ENABLE_FEC2=y
- CONFIG_FEC_548x_SHARED_PHY=y
-@@ -560,13 +670,11 @@ CONFIG_FEC_548x_SHARED_PHY=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
- # CONFIG_TR is not set
--
--#
--# Wireless LAN
--#
--# CONFIG_WLAN_PRE80211 is not set
--# CONFIG_WLAN_80211 is not set
--# CONFIG_IWLWIFI_LEDS is not set
-+CONFIG_WLAN=y
-+# CONFIG_ATMEL is not set
-+# CONFIG_PRISM54 is not set
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-
- #
- # Enable WiMAX (Networking options) to see the WiMAX drivers
-@@ -580,15 +688,30 @@ CONFIG_FEC_548x_SHARED_PHY=y
- # CONFIG_USB_PEGASUS is not set
- # CONFIG_USB_RTL8150 is not set
- # CONFIG_USB_USBNET is not set
-+# CONFIG_USB_IPHETH is not set
- # CONFIG_WAN is not set
-+
-+#
-+# CAIF transport drivers
-+#
- # CONFIG_FDDI is not set
- # CONFIG_HIPPI is not set
--# CONFIG_PPP is not set
-+CONFIG_PPP=y
-+CONFIG_PPP_MULTILINK=y
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=y
-+CONFIG_PPP_SYNC_TTY=y
-+# CONFIG_PPP_DEFLATE is not set
-+# CONFIG_PPP_BSDCOMP is not set
-+# CONFIG_PPP_MPPE is not set
-+CONFIG_PPPOE=y
- # CONFIG_SLIP is not set
-+CONFIG_SLHC=y
- # CONFIG_NET_FC is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_VMXNET3 is not set
- # CONFIG_ISDN is not set
- # CONFIG_PHONE is not set
-
-@@ -598,6 +721,7 @@ CONFIG_FEC_548x_SHARED_PHY=y
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- # CONFIG_INPUT_POLLDEV is not set
-+# CONFIG_INPUT_SPARSEKMAP is not set
-
- #
- # Userland interfaces
-@@ -614,12 +738,18 @@ CONFIG_INPUT_EVDEV=y
- # Input Device Drivers
- #
- CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ADP5588 is not set
- # CONFIG_KEYBOARD_ATKBD is not set
--# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_QT2160 is not set
- # CONFIG_KEYBOARD_LKKBD is not set
--# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_TCA6416 is not set
-+# CONFIG_KEYBOARD_MAX7359 is not set
-+# CONFIG_KEYBOARD_MCS is not set
- # CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_OPENCORES is not set
- # CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
- # CONFIG_INPUT_TABLET is not set
-@@ -633,6 +763,8 @@ CONFIG_SERIO=y
- CONFIG_SERIO_SERPORT=y
- # CONFIG_SERIO_PCIPS2 is not set
- # CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO_ALTERA_PS2 is not set
-+# CONFIG_SERIO_PS2MULT is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -645,6 +777,7 @@ CONFIG_HW_CONSOLE=y
- # CONFIG_VT_HW_CONSOLE_BINDING is not set
- CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_N_GSM is not set
- # CONFIG_NOZOMI is not set
-
- #
-@@ -655,26 +788,34 @@ CONFIG_DEVKMEM=y
- #
- # Non-8250 serial port support
- #
-+# CONFIG_SERIAL_MFD_HSU is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
--# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+CONFIG_SERIAL_COLDFIRE_IRDA=y
- # CONFIG_SERIAL_COLDFIRE_EDMA is not set
- CONFIG_SERIAL_MCF=y
- CONFIG_SERIAL_MCF_BAUDRATE=115200
- CONFIG_SERIAL_MCF_CONSOLE=y
- # CONFIG_SERIAL_JSM is not set
-+# CONFIG_SERIAL_TIMBERDALE is not set
-+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-+# CONFIG_SERIAL_ALTERA_UART is not set
- CONFIG_UNIX98_PTYS=y
- # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_HW_RANDOM is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
- # CONFIG_R3964 is not set
- # CONFIG_APPLICOM is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-+# CONFIG_RAMOOPS is not set
- CONFIG_I2C=y
- CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_COMPAT=y
- CONFIG_I2C_CHARDEV=y
-+# CONFIG_I2C_MUX is not set
- CONFIG_I2C_HELPER_AUTO=y
-
- #
-@@ -702,9 +843,13 @@ CONFIG_I2C_HELPER_AUTO=y
- #
- # I2C system bus drivers (mostly embedded / system-on-chip)
- #
-+# CONFIG_I2C_INTEL_MID is not set
- CONFIG_I2C_MCF=y
- # CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_XILINX is not set
-+# CONFIG_I2C_EG20T is not set
-
- #
- # External I2C/SMBus adapter drivers
-@@ -714,36 +859,26 @@ CONFIG_I2C_MCF=y
- # CONFIG_I2C_TINY_USB is not set
-
- #
--# Graphics adapter I2C/DDC channel drivers
--#
--# CONFIG_I2C_VOODOO3 is not set
--
--#
- # Other I2C/SMBus bus drivers
- #
--# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_STUB is not set
--
--#
--# Miscellaneous I2C Chip support
--#
--# CONFIG_DS1682 is not set
--# CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_PCF8575 is not set
--# CONFIG_SENSORS_PCA9539 is not set
--# CONFIG_SENSORS_PCF8591 is not set
--# CONFIG_SENSORS_MAX6875 is not set
--# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
--# CONFIG_I2C_DEBUG_CHIP is not set
- # CONFIG_SPI is not set
-+
-+#
-+# PPS support
-+#
-+# CONFIG_PPS is not set
-+
-+#
-+# PPS generators support
-+#
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
- # CONFIG_THERMAL is not set
--# CONFIG_THERMAL_HWMON is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -770,41 +905,33 @@ CONFIG_SSB_POSSIBLE=y
- # Sonics Silicon Backplane
- #
- # CONFIG_SSB is not set
--
--#
--# Multifunction device drivers
--#
-+CONFIG_MFD_SUPPORT=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_TPS6507X is not set
- # CONFIG_MFD_TMIO is not set
- # CONFIG_PMIC_DA903X is not set
-+# CONFIG_PMIC_ADP5520 is not set
- # CONFIG_MFD_WM8400 is not set
--# CONFIG_MFD_WM8350_I2C is not set
- # CONFIG_MFD_PCF50633 is not set
-+# CONFIG_ABX500_CORE is not set
-+# CONFIG_MFD_CS5535 is not set
-+# CONFIG_LPC_SCH is not set
-+# CONFIG_MFD_RDC321X is not set
-+# CONFIG_MFD_JANZ_CMODIO is not set
-+# CONFIG_MFD_VX855 is not set
-+# CONFIG_MFD_WL1273_CORE is not set
- # CONFIG_REGULATOR is not set
--
--#
--# Multimedia devices
--#
--
--#
--# Multimedia core support
--#
--# CONFIG_VIDEO_DEV is not set
--# CONFIG_DVB_CORE is not set
--# CONFIG_VIDEO_MEDIA is not set
--
--#
--# Multimedia drivers
--#
--CONFIG_DAB=y
--# CONFIG_USB_DABUSB is not set
-+# CONFIG_MEDIA_SUPPORT is not set
-
- #
- # Graphics support
- #
-+CONFIG_VGA_ARB=y
-+CONFIG_VGA_ARB_MAX_GPUS=16
- # CONFIG_DRM is not set
-+# CONFIG_STUB_POULSBO is not set
- # CONFIG_VGASTATE is not set
- CONFIG_VIDEO_OUTPUT_CONTROL=m
- # CONFIG_FB is not set
-@@ -835,7 +962,6 @@ CONFIG_USB=y
- # CONFIG_USB_DEVICEFS is not set
- CONFIG_USB_DEVICE_CLASS=y
- # CONFIG_USB_DYNAMIC_MINORS is not set
--# CONFIG_USB_SUSPEND is not set
- # CONFIG_USB_OTG is not set
- CONFIG_USB_MON=y
- # CONFIG_USB_WUSB is not set
-@@ -845,12 +971,17 @@ CONFIG_USB_MON=y
- # USB Host Controller Drivers
- #
- # CONFIG_USB_C67X00_HCD is not set
-+# CONFIG_USB_XHCI_HCD is not set
- CONFIG_USB_EHCI_HCD=y
- # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
- # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-+# CONFIG_USB_EHCI_FSL is not set
- # CONFIG_USB_OXU210HP_HCD is not set
- # CONFIG_USB_ISP116X_HCD is not set
- # CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_ISP1362_HCD is not set
- # CONFIG_USB_OHCI_HCD is not set
- # CONFIG_USB_UHCI_HCD is not set
- # CONFIG_USB_SL811_HCD is not set
-@@ -867,11 +998,11 @@ CONFIG_USB_EHCI_HCD=y
- # CONFIG_USB_TMC is not set
-
- #
--# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
- #
-
- #
--# see USB_STORAGE Help for more information
-+# also be needed; see USB_STORAGE Help for more info
- #
- CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_DEBUG is not set
-@@ -886,6 +1017,7 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_ONETOUCH is not set
- # CONFIG_USB_STORAGE_KARMA is not set
- # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_UAS is not set
- # CONFIG_USB_LIBUSUAL is not set
-
- #
-@@ -909,11 +1041,9 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
--# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
- # CONFIG_USB_FTDI_ELAN is not set
- # CONFIG_USB_APPLEDISPLAY is not set
-@@ -921,17 +1051,20 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
- # CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
- # CONFIG_USB_ISIGHTFW is not set
--# CONFIG_USB_VST is not set
-+# CONFIG_USB_YUREX is not set
- # CONFIG_USB_GADGET is not set
-
- #
- # OTG and related infrastructure
- #
-+# CONFIG_NOP_USB_XCEIV is not set
- # CONFIG_UWB is not set
- # CONFIG_MMC is not set
- # CONFIG_MEMSTICK is not set
- # CONFIG_NEW_LEDS is not set
-+# CONFIG_NFC_DEVICES is not set
- # CONFIG_ACCESSIBILITY is not set
- # CONFIG_INFINIBAND is not set
- CONFIG_RTC_LIB=y
-@@ -955,16 +1088,20 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_DS1307 is not set
- # CONFIG_RTC_DRV_DS1374 is not set
- # CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_DS3232 is not set
- # CONFIG_RTC_DRV_MAX6900 is not set
- CONFIG_RTC_DRV_RS5C372=y
- # CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_ISL12022 is not set
- # CONFIG_RTC_DRV_X1205 is not set
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_BQ32K is not set
- # CONFIG_RTC_DRV_S35390A is not set
- # CONFIG_RTC_DRV_FM3130 is not set
- # CONFIG_RTC_DRV_RX8581 is not set
-+# CONFIG_RTC_DRV_RX8025 is not set
-
- #
- # SPI RTC drivers
-@@ -981,15 +1118,19 @@ CONFIG_RTC_DRV_RS5C372=y
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T35 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_MSM6242 is not set
- # CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_RP5C01 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-
- #
- # on-CPU RTC drivers
- #
-+# CONFIG_RTC_DRV_GENERIC is not set
- # CONFIG_RTC_MCF is not set
- # CONFIG_RTC_M5441X is not set
- # CONFIG_DMADEVICES is not set
-+# CONFIG_AUXDISPLAY is not set
- # CONFIG_UIO is not set
- # CONFIG_STAGING is not set
-
-@@ -1008,6 +1149,7 @@ CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
-+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
- CONFIG_EXT3_FS_XATTR=y
- # CONFIG_EXT3_FS_POSIX_ACL is not set
- # CONFIG_EXT3_FS_SECURITY is not set
-@@ -1016,20 +1158,27 @@ CONFIG_JBD=y
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--# CONFIG_FS_POSIX_ACL is not set
--CONFIG_FILE_LOCKING=y
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
--# CONFIG_OCFS2_FS is not set
- # CONFIG_BTRFS_FS is not set
-+# CONFIG_NILFS2_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+CONFIG_FSNOTIFY=y
- CONFIG_DNOTIFY=y
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_FANOTIFY is not set
- # CONFIG_QUOTA is not set
--# CONFIG_AUTOFS_FS is not set
-+# CONFIG_QUOTACTL is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-
- #
-+# Caches
-+#
-+# CONFIG_FSCACHE is not set
-+
-+#
- # CD-ROM/DVD Filesystems
- #
- # CONFIG_ISO9660_FS is not set
-@@ -1067,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
-+# CONFIG_YAFFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
- CONFIG_JFFS2_FS_WRITEBUFFER=y
-@@ -1078,6 +1228,7 @@ CONFIG_JFFS2_ZLIB=y
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_LOGFS is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_SQUASHFS is not set
- # CONFIG_VXFS_FS is not set
-@@ -1086,6 +1237,10 @@ CONFIG_MINIX_FS=y
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
- CONFIG_ROMFS_FS=y
-+CONFIG_ROMFS_BACKED_BY_BLOCK=y
-+# CONFIG_ROMFS_BACKED_BY_MTD is not set
-+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-+CONFIG_ROMFS_ON_BLOCK=y
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1097,10 +1252,8 @@ CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
--# CONFIG_SUNRPC_REGISTER_V4 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
--# CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
-+# CONFIG_CEPH_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-@@ -1167,7 +1320,6 @@ CONFIG_NLS_ISO8859_1=y
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=y
--# CONFIG_DLM is not set
-
- #
- # Kernel hacking
-@@ -1177,19 +1329,18 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
- # CONFIG_ENABLE_MUST_CHECK is not set
- CONFIG_FRAME_WARN=1024
- # CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_STRIP_ASM_SYMS is not set
- # CONFIG_UNUSED_SYMBOLS is not set
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- # CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_HARDLOCKUP_DETECTOR is not set
-+CONFIG_BKL=y
-+# CONFIG_SPARSE_RCU_POINTER is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- CONFIG_DEBUG_MEMORY_INIT=y
--# CONFIG_RCU_CPU_STALL_DETECTOR is not set
- # CONFIG_SYSCTL_SYSCALL_CHECK is not set
--
--#
--# Tracers
--#
--# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_ATOMIC64_SELFTEST is not set
- # CONFIG_SAMPLES is not set
- # CONFIG_BOOTPARAM is not set
-
-@@ -1197,15 +1348,16 @@ CONFIG_DEBUG_MEMORY_INIT=y
- # Security options
- #
- # CONFIG_KEYS is not set
-+# CONFIG_SECURITY_DMESG_RESTRICT is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITYFS is not set
--# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_DEFAULT_SECURITY_DAC=y
-+CONFIG_DEFAULT_SECURITY=""
- CONFIG_CRYPTO=y
-
- #
- # Crypto core or helper
- #
--# CONFIG_CRYPTO_FIPS is not set
- CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_ALGAPI2=y
- CONFIG_CRYPTO_AEAD=y
-@@ -1215,10 +1367,13 @@ CONFIG_CRYPTO_BLKCIPHER2=y
- CONFIG_CRYPTO_HASH=y
- CONFIG_CRYPTO_HASH2=y
- CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_PCOMP2=y
- CONFIG_CRYPTO_MANAGER=y
- CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
- # CONFIG_CRYPTO_GF128MUL is not set
- # CONFIG_CRYPTO_NULL is not set
-+CONFIG_CRYPTO_WORKQUEUE=y
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_AUTHENC=y
- CONFIG_CRYPTO_TEST=m
-@@ -1246,11 +1401,13 @@ CONFIG_CRYPTO_CBC=y
- #
- CONFIG_CRYPTO_HMAC=y
- # CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_VMAC is not set
-
- #
- # Digest
- #
- CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_GHASH is not set
- # CONFIG_CRYPTO_MD4 is not set
- CONFIG_CRYPTO_MD5=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
-@@ -1267,9 +1424,9 @@ CONFIG_CRYPTO_SHA1=y
- #
- # Ciphers
- #
--# CONFIG_CRYPTO_AES is not set
-+CONFIG_CRYPTO_AES=y
- # CONFIG_CRYPTO_ANUBIS is not set
--# CONFIG_CRYPTO_ARC4 is not set
-+CONFIG_CRYPTO_ARC4=y
- # CONFIG_CRYPTO_BLOWFISH is not set
- # CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_CAST5 is not set
-@@ -1287,22 +1444,19 @@ CONFIG_CRYPTO_DES=y
- # Compression
- #
- # CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_ZLIB is not set
- # CONFIG_CRYPTO_LZO is not set
-
- #
- # Random Number Generation
- #
- # CONFIG_CRYPTO_ANSI_CPRNG is not set
--
--#
--# OCF Configuration
--#
--# CONFIG_OCF_OCF is not set
--
--#
--# Talitos Driver
--#
--# CONFIG_CRYPTO_HW is not set
-+# CONFIG_CRYPTO_USER_API_HASH is not set
-+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-+CONFIG_CRYPTO_HW=y
-+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-+CONFIG_CRYPTO_DEV_CF_TALITOS=y
-+# CONFIG_BINARY_PRINTF is not set
-
- #
- # Library routines
-@@ -1318,7 +1472,23 @@ CONFIG_CRC32=y
- CONFIG_LIBCRC32C=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
--CONFIG_PLIST=y
-+CONFIG_LZO_DECOMPRESS=y
-+CONFIG_XZ_DEC=y
-+CONFIG_XZ_DEC_X86=y
-+CONFIG_XZ_DEC_POWERPC=y
-+CONFIG_XZ_DEC_IA64=y
-+CONFIG_XZ_DEC_ARM=y
-+CONFIG_XZ_DEC_ARMTHUMB=y
-+CONFIG_XZ_DEC_SPARC=y
-+CONFIG_XZ_DEC_BCJ=y
-+# CONFIG_XZ_DEC_TEST is not set
-+CONFIG_DECOMPRESS_GZIP=y
-+CONFIG_DECOMPRESS_BZIP2=y
-+CONFIG_DECOMPRESS_LZMA=y
-+CONFIG_DECOMPRESS_XZ=y
-+CONFIG_DECOMPRESS_LZO=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
-+CONFIG_NLATTR=y
-+CONFIG_GENERIC_ATOMIC64=y
---- a/arch/m68k/configs/m5485evb_defconfig
-+++ b/arch/m68k/configs/m5485evb_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.29
--# Tue Aug 24 16:19:05 2010
-+# Linux kernel version: 2.6.38
-+# Tue Aug 2 16:47:50 2011
- #
- CONFIG_M68K=y
- CONFIG_MMU=y
-@@ -17,7 +17,9 @@ CONFIG_GENERIC_IOMAP=y
- # CONFIG_NO_IOPORT is not set
- # CONFIG_NO_DMA is not set
- CONFIG_HZ=100
-+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+CONFIG_CONSTRUCTORS=y
-
- #
- # General setup
-@@ -25,6 +27,7 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNA
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_CROSS_COMPILE=""
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- CONFIG_SWAP=y
-@@ -34,37 +37,34 @@ CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_AUDIT is not set
-+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-
- #
- # RCU Subsystem
- #
--CONFIG_CLASSIC_RCU=y
--# CONFIG_TREE_RCU is not set
-+CONFIG_TINY_RCU=y
- # CONFIG_PREEMPT_RCU is not set
-+# CONFIG_RCU_TRACE is not set
- # CONFIG_TREE_RCU_TRACE is not set
--# CONFIG_PREEMPT_RCU_TRACE is not set
- CONFIG_IKCONFIG=y
- CONFIG_IKCONFIG_PROC=y
- CONFIG_LOG_BUF_SHIFT=17
--CONFIG_GROUP_SCHED=y
--CONFIG_FAIR_GROUP_SCHED=y
--# CONFIG_RT_GROUP_SCHED is not set
--CONFIG_USER_SCHED=y
--# CONFIG_CGROUP_SCHED is not set
- # CONFIG_CGROUPS is not set
--CONFIG_SYSFS_DEPRECATED=y
--CONFIG_SYSFS_DEPRECATED_V2=y
--# CONFIG_RELAY is not set
- CONFIG_NAMESPACES=y
- # CONFIG_UTS_NS is not set
- # CONFIG_IPC_NS is not set
- # CONFIG_USER_NS is not set
- # CONFIG_PID_NS is not set
- # CONFIG_NET_NS is not set
-+# CONFIG_SCHED_AUTOGROUP is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
- # CONFIG_BLK_DEV_INITRD is not set
- # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
- CONFIG_ANON_INODES=y
-+# CONFIG_EXPERT is not set
- # CONFIG_EMBEDDED is not set
- CONFIG_UID16=y
- CONFIG_SYSCTL_SYSCALL=y
-@@ -82,13 +82,20 @@ CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_AIO=y
-+
-+#
-+# Kernel Performance Events And Counters
-+#
- CONFIG_VM_EVENT_COUNTERS=y
- CONFIG_PCI_QUIRKS=y
- CONFIG_COMPAT_BRK=y
- CONFIG_SLAB=y
- # CONFIG_SLUB is not set
--# CONFIG_SLOB is not set
- # CONFIG_PROFILING is not set
-+
-+#
-+# GCOV-based kernel profiling
-+#
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
-@@ -100,8 +107,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_BLOCK=y
--CONFIG_LBD=y
--# CONFIG_BLK_DEV_IO_TRACE is not set
-+CONFIG_LBDAF=y
- # CONFIG_BLK_DEV_BSG is not set
- # CONFIG_BLK_DEV_INTEGRITY is not set
-
-@@ -109,14 +115,41 @@ CONFIG_LBD=y
- # IO Schedulers
- #
- CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
- CONFIG_IOSCHED_DEADLINE=y
- CONFIG_IOSCHED_CFQ=y
--# CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+# CONFIG_INLINE_SPIN_TRYLOCK is not set
-+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK is not set
-+# CONFIG_INLINE_SPIN_LOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_SPIN_UNLOCK=y
-+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_READ_TRYLOCK is not set
-+# CONFIG_INLINE_READ_LOCK is not set
-+# CONFIG_INLINE_READ_LOCK_BH is not set
-+# CONFIG_INLINE_READ_LOCK_IRQ is not set
-+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_READ_UNLOCK=y
-+# CONFIG_INLINE_READ_UNLOCK_BH is not set
-+CONFIG_INLINE_READ_UNLOCK_IRQ=y
-+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_WRITE_TRYLOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK_BH is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_WRITE_UNLOCK=y
-+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
- # CONFIG_FREEZER is not set
-
- #
-@@ -180,18 +213,19 @@ CONFIG_SINGLE_MEMORY_CHUNK=y
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
- CONFIG_SELECT_MEMORY_MODEL=y
- CONFIG_FLATMEM_MANUAL=y
--# CONFIG_DISCONTIGMEM_MANUAL is not set
--# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- CONFIG_NEED_MULTIPLE_NODES=y
- CONFIG_PAGEFLAGS_EXTENDED=y
- CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_COMPACTION is not set
- # CONFIG_PHYS_ADDR_T_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
- CONFIG_BOUNCE=y
- CONFIG_VIRT_TO_BUS=y
--CONFIG_UNEVICTABLE_LRU=y
-+# CONFIG_KSM is not set
-+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-+CONFIG_NEED_PER_CPU_KM=y
-
- #
- # General setup
-@@ -204,8 +238,8 @@ CONFIG_HAVE_AOUT=y
- CONFIG_PROC_HARDWARE=y
- CONFIG_ZONE_DMA=y
- # CONFIG_ARCH_SUPPORTS_MSI is not set
--CONFIG_PCI_LEGACY=y
- # CONFIG_PCI_STUB is not set
-+# CONFIG_PCI_IOV is not set
-
- #
- # Power management options
-@@ -216,9 +250,7 @@ CONFIG_NET=y
- #
- # Networking options
- #
--CONFIG_COMPAT_NET_DEV_OPS=y
- CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
-@@ -241,7 +273,7 @@ CONFIG_IP_PNP=y
- # CONFIG_IP_PNP_BOOTP is not set
- # CONFIG_IP_PNP_RARP is not set
- # CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+# CONFIG_NET_IPGRE_DEMUX is not set
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
- CONFIG_INET_AH=y
-@@ -261,11 +293,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
-+# CONFIG_RDS is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
-+# CONFIG_L2TP is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_NET_DSA is not set
- # CONFIG_VLAN_8021Q is not set
-@@ -277,8 +312,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
-+# CONFIG_PHONET is not set
-+# CONFIG_IEEE802154 is not set
- # CONFIG_NET_SCHED is not set
- # CONFIG_DCB is not set
-+# CONFIG_BATMAN_ADV is not set
-
- #
- # Network testing
-@@ -293,25 +331,83 @@ CONFIG_CAN_RAW=y
- # CAN Device Drivers
- #
- # CONFIG_CAN_VCAN is not set
-+# CONFIG_CAN_SLCAN is not set
- CONFIG_CAN_DEV=y
- CONFIG_CAN_CALC_BITTIMING=y
-+CONFIG_HAVE_CAN_FLEXCAN=y
- CONFIG_CAN_FLEXCAN=y
--CONFIG_CAN_MCF=y
-+CONFIG_FLEXCAN_NORXFIFO=y
-+# CONFIG_PCH_CAN is not set
-+# CONFIG_CAN_MSCAN is not set
-+# CONFIG_CAN_SJA1000 is not set
-+
-+#
-+# CAN USB interfaces
-+#
-+# CONFIG_CAN_EMS_USB is not set
-+# CONFIG_CAN_ESD_USB2 is not set
-+# CONFIG_CAN_SOFTING is not set
- # CONFIG_CAN_DEBUG_DEVICES is not set
--# CONFIG_IRDA is not set
-+CONFIG_IRDA=y
-+
-+#
-+# IrDA protocols
-+#
-+# CONFIG_IRLAN is not set
-+CONFIG_IRNET=y
-+CONFIG_IRCOMM=y
-+# CONFIG_IRDA_ULTRA is not set
-+
-+#
-+# IrDA options
-+#
-+CONFIG_IRDA_CACHE_LAST_LSAP=y
-+# CONFIG_IRDA_FAST_RR is not set
-+# CONFIG_IRDA_DEBUG is not set
-+
-+#
-+# Infrared-port device drivers
-+#
-+
-+#
-+# SIR device drivers
-+#
-+CONFIG_IRTTY_SIR=y
-+
-+#
-+# Dongle support
-+#
-+# CONFIG_DONGLE is not set
-+# CONFIG_KINGSUN_DONGLE is not set
-+# CONFIG_KSDAZZLE_DONGLE is not set
-+# CONFIG_KS959_DONGLE is not set
-+
-+#
-+# FIR device drivers
-+#
-+# CONFIG_USB_IRDA is not set
-+# CONFIG_SIGMATEL_FIR is not set
-+# CONFIG_TOSHIBA_FIR is not set
-+# CONFIG_VLSI_FIR is not set
-+# CONFIG_MCS_FIR is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
--# CONFIG_PHONET is not set
- CONFIG_WIRELESS=y
- # CONFIG_CFG80211 is not set
--CONFIG_WIRELESS_OLD_REGULATORY=y
--# CONFIG_WIRELESS_EXT is not set
- # CONFIG_LIB80211 is not set
--# CONFIG_MAC80211 is not set
-+
-+#
-+# CFG80211 needs to be enabled for MAC80211
-+#
-+
-+#
-+# Some wireless drivers require a rate control algorithm
-+#
- # CONFIG_WIMAX is not set
- # CONFIG_RFKILL is not set
- # CONFIG_NET_9P is not set
--# CONFIG_KLIPS is not set
-+# CONFIG_CAIF is not set
-+# CONFIG_CEPH_LIB is not set
-
- #
- # Device Drivers
-@@ -321,6 +417,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
- # Generic Driver Options
- #
- CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_DEVTMPFS is not set
- # CONFIG_STANDALONE is not set
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- CONFIG_FW_LOADER=y
-@@ -330,9 +427,9 @@ CONFIG_EXTRA_FIRMWARE=""
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_TESTS is not set
- CONFIG_MTD_CONCAT=y
- CONFIG_MTD_PARTITIONS=y
--# CONFIG_MTD_TESTS is not set
- # CONFIG_MTD_REDBOOT_PARTS is not set
- CONFIG_MTD_CMDLINE_PARTS=y
- # CONFIG_MTD_AR7_PARTS is not set
-@@ -348,6 +445,7 @@ CONFIG_MTD_BLOCK=y
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_SM_FTL is not set
- # CONFIG_MTD_OOPS is not set
-
- #
-@@ -409,10 +507,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- # LPDDR flash memory drivers
- #
- # CONFIG_MTD_LPDDR is not set
--
--#
--# UBI - Unsorted block images
--#
- # CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
-@@ -423,6 +517,10 @@ CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+
-+#
-+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-+#
- # CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_SX8 is not set
- # CONFIG_BLK_DEV_UB is not set
-@@ -433,13 +531,26 @@ CONFIG_BLK_DEV_RAM_SIZE=64000
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- # CONFIG_BLK_DEV_HD is not set
-+# CONFIG_BLK_DEV_RBD is not set
- CONFIG_MISC_DEVICES=y
-+# CONFIG_AD525X_DPOT is not set
- # CONFIG_PHANTOM is not set
- # CONFIG_SGI_IOC4 is not set
- # CONFIG_TIFM_CORE is not set
- # CONFIG_ICS932S401 is not set
- # CONFIG_ENCLOSURE_SERVICES is not set
- # CONFIG_HP_ILO is not set
-+# CONFIG_APDS9802ALS is not set
-+# CONFIG_ISL29003 is not set
-+# CONFIG_ISL29020 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_SENSORS_BH1780 is not set
-+# CONFIG_SENSORS_BH1770 is not set
-+# CONFIG_SENSORS_APDS990X is not set
-+# CONFIG_HMC6352 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_BMP085 is not set
-+# CONFIG_PCH_PHUB is not set
- # CONFIG_C2PORT is not set
-
- #
-@@ -447,7 +558,13 @@ CONFIG_MISC_DEVICES=y
- #
- # CONFIG_EEPROM_AT24 is not set
- # CONFIG_EEPROM_LEGACY is not set
-+# CONFIG_EEPROM_MAX6875 is not set
- # CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_CB710_CORE is not set
-+
-+#
-+# Texas Instruments shared transport line discipline
-+#
- CONFIG_HAVE_IDE=y
- CONFIG_IDE=y
-
-@@ -501,6 +618,7 @@ CONFIG_IDE_PROC_FS=y
- #
- # SCSI device support
- #
-+CONFIG_SCSI_MOD=y
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
- CONFIG_SCSI_DMA=y
-@@ -517,10 +635,6 @@ CONFIG_BLK_DEV_SD=y
- # CONFIG_BLK_DEV_SR is not set
- # CONFIG_CHR_DEV_SG is not set
- # CONFIG_CHR_DEV_SCH is not set
--
--#
--# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
--#
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-@@ -533,81 +647,113 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
- # CONFIG_SCSI_SRP_ATTRS is not set
- # CONFIG_SCSI_LOWLEVEL is not set
- # CONFIG_SCSI_DH is not set
-+# CONFIG_SCSI_OSD_INITIATOR is not set
- CONFIG_ATA=y
- # CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_ATA_VERBOSE_ERROR=y
- CONFIG_SATA_PMP=y
-+
-+#
-+# Controllers with non-SFF native interface
-+#
- # CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_AHCI_PLATFORM is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_SATA_ACARD_AHCI is not set
- CONFIG_SATA_SIL24=y
- CONFIG_ATA_SFF=y
--# CONFIG_SATA_SVW is not set
-+
-+#
-+# SFF controllers with custom DMA interface
-+#
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_SX4 is not set
-+CONFIG_ATA_BMDMA=y
-+
-+#
-+# SATA SFF controllers with BMDMA
-+#
- # CONFIG_ATA_PIIX is not set
- # CONFIG_SATA_MV is not set
- # CONFIG_SATA_NV is not set
--# CONFIG_PDC_ADMA is not set
--# CONFIG_SATA_QSTOR is not set
- # CONFIG_SATA_PROMISE is not set
--# CONFIG_SATA_SX4 is not set
- CONFIG_SATA_SIL=y
- # CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_SVW is not set
- # CONFIG_SATA_ULI is not set
- # CONFIG_SATA_VIA is not set
- # CONFIG_SATA_VITESSE is not set
--# CONFIG_SATA_INIC162X is not set
-+
-+#
-+# PATA SFF controllers with BMDMA
-+#
- # CONFIG_PATA_ALI is not set
- # CONFIG_PATA_AMD is not set
- # CONFIG_PATA_ARTOP is not set
- # CONFIG_PATA_ATIIXP is not set
--# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_ATP867X is not set
- # CONFIG_PATA_CMD64X is not set
- # CONFIG_PATA_CS5520 is not set
- # CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CS5536 is not set
- # CONFIG_PATA_CYPRESS is not set
- # CONFIG_PATA_EFAR is not set
--# CONFIG_ATA_GENERIC is not set
- # CONFIG_PATA_HPT366 is not set
- # CONFIG_PATA_HPT37X is not set
- # CONFIG_PATA_HPT3X2N is not set
- # CONFIG_PATA_HPT3X3 is not set
--# CONFIG_PATA_IT821X is not set
- # CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_IT821X is not set
- # CONFIG_PATA_JMICRON is not set
--# CONFIG_PATA_TRIFLEX is not set
- # CONFIG_PATA_MARVELL is not set
--# CONFIG_PATA_MPIIX is not set
--# CONFIG_PATA_OLDPIIX is not set
- # CONFIG_PATA_NETCELL is not set
- # CONFIG_PATA_NINJA32 is not set
--# CONFIG_PATA_NS87410 is not set
- # CONFIG_PATA_NS87415 is not set
--# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OLDPIIX is not set
- # CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC2027X is not set
- # CONFIG_PATA_PDC_OLD is not set
- # CONFIG_PATA_RADISYS is not set
--# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_RDC is not set
- # CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SCH is not set
- # CONFIG_PATA_SERVERWORKS is not set
--# CONFIG_PATA_PDC2027X is not set
- # CONFIG_PATA_SIL680 is not set
- # CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_TOSHIBA is not set
-+# CONFIG_PATA_TRIFLEX is not set
- # CONFIG_PATA_VIA is not set
- # CONFIG_PATA_WINBOND is not set
--# CONFIG_PATA_SCH is not set
--# CONFIG_MD is not set
--# CONFIG_FUSION is not set
-
- #
--# IEEE 1394 (FireWire) support
-+# PIO-only SFF controllers
-+#
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_RZ1000 is not set
-+
-+#
-+# Generic fallback / legacy drivers
- #
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_LEGACY is not set
-+# CONFIG_MD is not set
-+# CONFIG_TARGET_CORE is not set
-+# CONFIG_FUSION is not set
-
- #
--# Enable only one of the two stacks, unless you know what you are doing
-+# IEEE 1394 (FireWire) support
- #
- # CONFIG_FIREWIRE is not set
--# CONFIG_IEEE1394 is not set
-+# CONFIG_FIREWIRE_NOSY is not set
- # CONFIG_I2O is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
-@@ -617,6 +763,7 @@ CONFIG_NETDEVICES=y
- # CONFIG_TUN is not set
- # CONFIG_VETH is not set
- # CONFIG_ARCNET is not set
-+CONFIG_MII=y
- CONFIG_PHYLIB=y
-
- #
-@@ -631,22 +778,24 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- CONFIG_BROADCOM5222_PHY=y
-+# CONFIG_BCM63XX_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
- # CONFIG_REALTEK_PHY is not set
- # CONFIG_NATIONAL_PHY is not set
- # CONFIG_NATIONAL8364x_PHY is not set
- # CONFIG_NATIONAL8384x_PHY is not set
--# CONFIG_MicrelKSZ8041_PHY is not set
- # CONFIG_STE10XP is not set
- # CONFIG_LSI_ET1011C_PHY is not set
-+# CONFIG_MICREL_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
- # CONFIG_HAPPYMEAL is not set
- # CONFIG_SUNGEM is not set
- # CONFIG_CASSINI is not set
- # CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_ETHOC is not set
- # CONFIG_DNET is not set
- # CONFIG_NET_TULIP is not set
- # CONFIG_HP100 is not set
-@@ -661,6 +810,7 @@ CONFIG_NET_PCI=y
- # CONFIG_PCNET32 is not set
- # CONFIG_AMD8111_ETH is not set
- # CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_KSZ884X_PCI is not set
- # CONFIG_B44 is not set
- # CONFIG_FORCEDETH is not set
- CONFIG_E100=y
-@@ -679,6 +829,7 @@ CONFIG_8139TOO_PIO=y
- # CONFIG_SMSC9420 is not set
- # CONFIG_SUNDANCE is not set
- # CONFIG_TLAN is not set
-+# CONFIG_KS8851_MLL is not set
- # CONFIG_VIA_RHINE is not set
- # CONFIG_SC92031 is not set
- CONFIG_FEC_548x=y
-@@ -692,6 +843,7 @@ CONFIG_E1000=y
- # CONFIG_E1000E is not set
- # CONFIG_IP1000 is not set
- # CONFIG_IGB is not set
-+# CONFIG_IGBVF is not set
- # CONFIG_NS83820 is not set
- # CONFIG_HAMACHI is not set
- # CONFIG_YELLOWFIN is not set
-@@ -702,20 +854,21 @@ CONFIG_R8169=y
- # CONFIG_VIA_VELOCITY is not set
- # CONFIG_TIGON3 is not set
- # CONFIG_BNX2 is not set
-+# CONFIG_CNIC is not set
- # CONFIG_QLA3XXX is not set
- # CONFIG_ATL1 is not set
- # CONFIG_ATL1E is not set
- # CONFIG_ATL1C is not set
- # CONFIG_JME is not set
-+# CONFIG_STMMAC_ETH is not set
-+# CONFIG_PCH_GBE is not set
- # CONFIG_NETDEV_10000 is not set
- # CONFIG_TR is not set
--
--#
--# Wireless LAN
--#
--# CONFIG_WLAN_PRE80211 is not set
--# CONFIG_WLAN_80211 is not set
--# CONFIG_IWLWIFI_LEDS is not set
-+CONFIG_WLAN=y
-+# CONFIG_ATMEL is not set
-+# CONFIG_PRISM54 is not set
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-
- #
- # Enable WiMAX (Networking options) to see the WiMAX drivers
-@@ -729,15 +882,30 @@ CONFIG_R8169=y
- # CONFIG_USB_PEGASUS is not set
- # CONFIG_USB_RTL8150 is not set
- # CONFIG_USB_USBNET is not set
-+# CONFIG_USB_IPHETH is not set
- # CONFIG_WAN is not set
-+
-+#
-+# CAIF transport drivers
-+#
- # CONFIG_FDDI is not set
- # CONFIG_HIPPI is not set
--# CONFIG_PPP is not set
-+CONFIG_PPP=y
-+CONFIG_PPP_MULTILINK=y
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=y
-+CONFIG_PPP_SYNC_TTY=y
-+# CONFIG_PPP_DEFLATE is not set
-+# CONFIG_PPP_BSDCOMP is not set
-+# CONFIG_PPP_MPPE is not set
-+CONFIG_PPPOE=y
- # CONFIG_SLIP is not set
-+CONFIG_SLHC=y
- # CONFIG_NET_FC is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_VMXNET3 is not set
- # CONFIG_ISDN is not set
- # CONFIG_PHONE is not set
-
-@@ -747,6 +915,7 @@ CONFIG_R8169=y
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- # CONFIG_INPUT_POLLDEV is not set
-+# CONFIG_INPUT_SPARSEKMAP is not set
-
- #
- # Userland interfaces
-@@ -763,12 +932,18 @@ CONFIG_INPUT_EVDEV=y
- # Input Device Drivers
- #
- CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ADP5588 is not set
- # CONFIG_KEYBOARD_ATKBD is not set
--# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_QT2160 is not set
- # CONFIG_KEYBOARD_LKKBD is not set
--# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_TCA6416 is not set
-+# CONFIG_KEYBOARD_MAX7359 is not set
-+# CONFIG_KEYBOARD_MCS is not set
- # CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_OPENCORES is not set
- # CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
- # CONFIG_INPUT_TABLET is not set
-@@ -782,6 +957,8 @@ CONFIG_SERIO=y
- CONFIG_SERIO_SERPORT=y
- # CONFIG_SERIO_PCIPS2 is not set
- # CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO_ALTERA_PS2 is not set
-+# CONFIG_SERIO_PS2MULT is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -794,6 +971,7 @@ CONFIG_HW_CONSOLE=y
- # CONFIG_VT_HW_CONSOLE_BINDING is not set
- CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_N_GSM is not set
- # CONFIG_NOZOMI is not set
-
- #
-@@ -804,26 +982,34 @@ CONFIG_DEVKMEM=y
- #
- # Non-8250 serial port support
- #
-+# CONFIG_SERIAL_MFD_HSU is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
--# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+CONFIG_SERIAL_COLDFIRE_IRDA=y
- # CONFIG_SERIAL_COLDFIRE_EDMA is not set
- CONFIG_SERIAL_MCF=y
- CONFIG_SERIAL_MCF_BAUDRATE=115200
- CONFIG_SERIAL_MCF_CONSOLE=y
- # CONFIG_SERIAL_JSM is not set
-+# CONFIG_SERIAL_TIMBERDALE is not set
-+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-+# CONFIG_SERIAL_ALTERA_UART is not set
- CONFIG_UNIX98_PTYS=y
- # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_HW_RANDOM is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
- # CONFIG_R3964 is not set
- # CONFIG_APPLICOM is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-+# CONFIG_RAMOOPS is not set
- CONFIG_I2C=y
- CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_COMPAT=y
- CONFIG_I2C_CHARDEV=y
-+# CONFIG_I2C_MUX is not set
- CONFIG_I2C_HELPER_AUTO=y
-
- #
-@@ -851,9 +1037,13 @@ CONFIG_I2C_HELPER_AUTO=y
- #
- # I2C system bus drivers (mostly embedded / system-on-chip)
- #
-+# CONFIG_I2C_INTEL_MID is not set
- CONFIG_I2C_MCF=y
- # CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_XILINX is not set
-+# CONFIG_I2C_EG20T is not set
-
- #
- # External I2C/SMBus adapter drivers
-@@ -863,36 +1053,26 @@ CONFIG_I2C_MCF=y
- # CONFIG_I2C_TINY_USB is not set
-
- #
--# Graphics adapter I2C/DDC channel drivers
--#
--# CONFIG_I2C_VOODOO3 is not set
--
--#
- # Other I2C/SMBus bus drivers
- #
--# CONFIG_I2C_PCA_PLATFORM is not set
- # CONFIG_I2C_STUB is not set
--
--#
--# Miscellaneous I2C Chip support
--#
--# CONFIG_DS1682 is not set
--# CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_PCF8575 is not set
--# CONFIG_SENSORS_PCA9539 is not set
--# CONFIG_SENSORS_PCF8591 is not set
--# CONFIG_SENSORS_MAX6875 is not set
--# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
--# CONFIG_I2C_DEBUG_CHIP is not set
- # CONFIG_SPI is not set
-+
-+#
-+# PPS support
-+#
-+# CONFIG_PPS is not set
-+
-+#
-+# PPS generators support
-+#
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
- # CONFIG_THERMAL is not set
--# CONFIG_THERMAL_HWMON is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -919,41 +1099,33 @@ CONFIG_SSB_POSSIBLE=y
- # Sonics Silicon Backplane
- #
- # CONFIG_SSB is not set
--
--#
--# Multifunction device drivers
--#
-+CONFIG_MFD_SUPPORT=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_TPS6507X is not set
- # CONFIG_MFD_TMIO is not set
- # CONFIG_PMIC_DA903X is not set
-+# CONFIG_PMIC_ADP5520 is not set
- # CONFIG_MFD_WM8400 is not set
--# CONFIG_MFD_WM8350_I2C is not set
- # CONFIG_MFD_PCF50633 is not set
-+# CONFIG_ABX500_CORE is not set
-+# CONFIG_MFD_CS5535 is not set
-+# CONFIG_LPC_SCH is not set
-+# CONFIG_MFD_RDC321X is not set
-+# CONFIG_MFD_JANZ_CMODIO is not set
-+# CONFIG_MFD_VX855 is not set
-+# CONFIG_MFD_WL1273_CORE is not set
- # CONFIG_REGULATOR is not set
--
--#
--# Multimedia devices
--#
--
--#
--# Multimedia core support
--#
--# CONFIG_VIDEO_DEV is not set
--# CONFIG_DVB_CORE is not set
--# CONFIG_VIDEO_MEDIA is not set
--
--#
--# Multimedia drivers
--#
--CONFIG_DAB=y
--# CONFIG_USB_DABUSB is not set
-+# CONFIG_MEDIA_SUPPORT is not set
-
- #
- # Graphics support
- #
-+CONFIG_VGA_ARB=y
-+CONFIG_VGA_ARB_MAX_GPUS=16
- # CONFIG_DRM is not set
-+# CONFIG_STUB_POULSBO is not set
- # CONFIG_VGASTATE is not set
- CONFIG_VIDEO_OUTPUT_CONTROL=m
- CONFIG_FB=y
-@@ -969,6 +1141,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
- # CONFIG_FB_SYS_IMAGEBLIT is not set
- # CONFIG_FB_FOREIGN_ENDIAN is not set
- # CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_WMT_GE_ROPS is not set
- CONFIG_FB_DEFERRED_IO=y
- # CONFIG_FB_SVGALIB is not set
- # CONFIG_FB_MACMODES is not set
-@@ -995,7 +1168,6 @@ CONFIG_FB_SMI=y
- # CONFIG_FB_S3 is not set
- # CONFIG_FB_SAVAGE is not set
- # CONFIG_FB_SIS is not set
--# CONFIG_FB_VIA is not set
- # CONFIG_FB_NEOMAGIC is not set
- # CONFIG_FB_KYRO is not set
- # CONFIG_FB_3DFX is not set
-@@ -1005,9 +1177,11 @@ CONFIG_FB_SMI=y
- # CONFIG_FB_ARK is not set
- # CONFIG_FB_PM3 is not set
- # CONFIG_FB_CARMINE is not set
-+# CONFIG_FB_UDL is not set
- # CONFIG_FB_VIRTUAL is not set
- # CONFIG_FB_METRONOME is not set
- # CONFIG_FB_MB862XX is not set
-+# CONFIG_FB_BROADSHEET is not set
- # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
-@@ -1040,7 +1214,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
- # CONFIG_SOUND is not set
- CONFIG_HID_SUPPORT=y
- CONFIG_HID=y
--CONFIG_HID_DEBUG=y
- # CONFIG_HIDRAW is not set
-
- #
-@@ -1053,31 +1226,55 @@ CONFIG_USB_HID=y
- #
- # Special HID drivers
- #
--CONFIG_HID_COMPAT=y
-+# CONFIG_HID_3M_PCT is not set
- CONFIG_HID_A4TECH=y
-+# CONFIG_HID_ACRUX_FF is not set
- CONFIG_HID_APPLE=y
- CONFIG_HID_BELKIN=y
-+# CONFIG_HID_CANDO is not set
- CONFIG_HID_CHERRY=y
- CONFIG_HID_CHICONY=y
- CONFIG_HID_CYPRESS=y
-+# CONFIG_HID_DRAGONRISE is not set
-+# CONFIG_HID_EMS_FF is not set
-+# CONFIG_HID_EGALAX is not set
- CONFIG_HID_EZKEY=y
-+CONFIG_HID_KYE=y
-+# CONFIG_HID_UCLOGIC is not set
-+# CONFIG_HID_WALTOP is not set
- CONFIG_HID_GYRATION=y
-+# CONFIG_HID_TWINHAN is not set
-+CONFIG_HID_KENSINGTON=y
- CONFIG_HID_LOGITECH=y
- # CONFIG_LOGITECH_FF is not set
- # CONFIG_LOGIRUMBLEPAD2_FF is not set
-+# CONFIG_LOGIG940_FF is not set
-+# CONFIG_LOGIWII_FF is not set
- CONFIG_HID_MICROSOFT=y
-+# CONFIG_HID_MOSART is not set
- CONFIG_HID_MONTEREY=y
-+# CONFIG_HID_MULTITOUCH is not set
- CONFIG_HID_NTRIG=y
-+# CONFIG_HID_ORTEK is not set
- CONFIG_HID_PANTHERLORD=y
- # CONFIG_PANTHERLORD_FF is not set
- CONFIG_HID_PETALYNX=y
-+# CONFIG_HID_PICOLCD is not set
-+# CONFIG_HID_QUANTA is not set
-+# CONFIG_HID_ROCCAT is not set
-+# CONFIG_HID_ROCCAT_KONE is not set
-+# CONFIG_HID_ROCCAT_KONEPLUS is not set
-+# CONFIG_HID_ROCCAT_PYRA is not set
- CONFIG_HID_SAMSUNG=y
- CONFIG_HID_SONY=y
-+# CONFIG_HID_STANTUM is not set
- CONFIG_HID_SUNPLUS=y
--# CONFIG_GREENASIA_FF is not set
-+# CONFIG_HID_GREENASIA is not set
-+# CONFIG_HID_SMARTJOYPLUS is not set
- CONFIG_HID_TOPSEED=y
--# CONFIG_THRUSTMASTER_FF is not set
--# CONFIG_ZEROPLUS_FF is not set
-+# CONFIG_HID_THRUSTMASTER is not set
-+# CONFIG_HID_ZEROPLUS is not set
-+# CONFIG_HID_ZYDACRON is not set
- CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
-@@ -1092,7 +1289,6 @@ CONFIG_USB=y
- CONFIG_USB_DEVICEFS=y
- # CONFIG_USB_DEVICE_CLASS is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
--# CONFIG_USB_SUSPEND is not set
- # CONFIG_USB_OTG is not set
- CONFIG_USB_MON=y
- # CONFIG_USB_WUSB is not set
-@@ -1102,12 +1298,17 @@ CONFIG_USB_MON=y
- # USB Host Controller Drivers
- #
- # CONFIG_USB_C67X00_HCD is not set
-+# CONFIG_USB_XHCI_HCD is not set
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_EHCI_ROOT_HUB_TT=y
- # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-+# CONFIG_USB_EHCI_FSL is not set
- # CONFIG_USB_OXU210HP_HCD is not set
- # CONFIG_USB_ISP116X_HCD is not set
- # CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_ISP1362_HCD is not set
- # CONFIG_USB_OHCI_HCD is not set
- # CONFIG_USB_UHCI_HCD is not set
- # CONFIG_USB_SL811_HCD is not set
-@@ -1124,11 +1325,11 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y
- # CONFIG_USB_TMC is not set
-
- #
--# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
- #
-
- #
--# see USB_STORAGE Help for more information
-+# also be needed; see USB_STORAGE Help for more info
- #
- CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_DEBUG is not set
-@@ -1143,6 +1344,7 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_STORAGE_ONETOUCH is not set
- # CONFIG_USB_STORAGE_KARMA is not set
- # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_UAS is not set
- # CONFIG_USB_LIBUSUAL is not set
-
- #
-@@ -1166,11 +1368,9 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
--# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
- # CONFIG_USB_FTDI_ELAN is not set
- # CONFIG_USB_APPLEDISPLAY is not set
-@@ -1180,16 +1380,18 @@ CONFIG_USB_STORAGE=y
- # CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
- # CONFIG_USB_ISIGHTFW is not set
--# CONFIG_USB_VST is not set
-+# CONFIG_USB_YUREX is not set
- # CONFIG_USB_GADGET is not set
-
- #
- # OTG and related infrastructure
- #
-+# CONFIG_NOP_USB_XCEIV is not set
- # CONFIG_UWB is not set
- # CONFIG_MMC is not set
- # CONFIG_MEMSTICK is not set
- # CONFIG_NEW_LEDS is not set
-+# CONFIG_NFC_DEVICES is not set
- # CONFIG_ACCESSIBILITY is not set
- # CONFIG_INFINIBAND is not set
- CONFIG_RTC_LIB=y
-@@ -1213,16 +1415,20 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_DS1307 is not set
- # CONFIG_RTC_DRV_DS1374 is not set
- # CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_DS3232 is not set
- # CONFIG_RTC_DRV_MAX6900 is not set
- CONFIG_RTC_DRV_RS5C372=y
- # CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_ISL12022 is not set
- # CONFIG_RTC_DRV_X1205 is not set
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_BQ32K is not set
- # CONFIG_RTC_DRV_S35390A is not set
- # CONFIG_RTC_DRV_FM3130 is not set
- # CONFIG_RTC_DRV_RX8581 is not set
-+# CONFIG_RTC_DRV_RX8025 is not set
-
- #
- # SPI RTC drivers
-@@ -1239,15 +1445,19 @@ CONFIG_RTC_DRV_RS5C372=y
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T35 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_MSM6242 is not set
- # CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_RP5C01 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-
- #
- # on-CPU RTC drivers
- #
-+# CONFIG_RTC_DRV_GENERIC is not set
- # CONFIG_RTC_MCF is not set
- # CONFIG_RTC_M5441X is not set
- # CONFIG_DMADEVICES is not set
-+# CONFIG_AUXDISPLAY is not set
- # CONFIG_UIO is not set
- # CONFIG_STAGING is not set
-
-@@ -1266,6 +1476,7 @@ CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
-+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
- CONFIG_EXT3_FS_XATTR=y
- # CONFIG_EXT3_FS_POSIX_ACL is not set
- # CONFIG_EXT3_FS_SECURITY is not set
-@@ -1274,20 +1485,27 @@ CONFIG_JBD=y
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--# CONFIG_FS_POSIX_ACL is not set
--CONFIG_FILE_LOCKING=y
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
--# CONFIG_OCFS2_FS is not set
- # CONFIG_BTRFS_FS is not set
-+# CONFIG_NILFS2_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+CONFIG_FSNOTIFY=y
- CONFIG_DNOTIFY=y
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_FANOTIFY is not set
- # CONFIG_QUOTA is not set
--# CONFIG_AUTOFS_FS is not set
-+# CONFIG_QUOTACTL is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-
- #
-+# Caches
-+#
-+# CONFIG_FSCACHE is not set
-+
-+#
- # CD-ROM/DVD Filesystems
- #
- # CONFIG_ISO9660_FS is not set
-@@ -1325,6 +1543,7 @@ CONFIG_MISC_FILESYSTEMS=y
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
-+# CONFIG_YAFFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
- CONFIG_JFFS2_FS_WRITEBUFFER=y
-@@ -1336,6 +1555,7 @@ CONFIG_JFFS2_ZLIB=y
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_LOGFS is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_SQUASHFS is not set
- # CONFIG_VXFS_FS is not set
-@@ -1344,6 +1564,10 @@ CONFIG_MINIX_FS=y
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
- CONFIG_ROMFS_FS=y
-+CONFIG_ROMFS_BACKED_BY_BLOCK=y
-+# CONFIG_ROMFS_BACKED_BY_MTD is not set
-+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-+CONFIG_ROMFS_ON_BLOCK=y
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1355,10 +1579,8 @@ CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
--# CONFIG_SUNRPC_REGISTER_V4 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
--# CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
-+# CONFIG_CEPH_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-@@ -1425,7 +1647,6 @@ CONFIG_NLS_ISO8859_1=y
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=y
--# CONFIG_DLM is not set
-
- #
- # Kernel hacking
-@@ -1435,19 +1656,18 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
- # CONFIG_ENABLE_MUST_CHECK is not set
- CONFIG_FRAME_WARN=1024
- # CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_STRIP_ASM_SYMS is not set
- # CONFIG_UNUSED_SYMBOLS is not set
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- # CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_HARDLOCKUP_DETECTOR is not set
-+CONFIG_BKL=y
-+# CONFIG_SPARSE_RCU_POINTER is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- CONFIG_DEBUG_MEMORY_INIT=y
--# CONFIG_RCU_CPU_STALL_DETECTOR is not set
- # CONFIG_SYSCTL_SYSCALL_CHECK is not set
--
--#
--# Tracers
--#
--# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_ATOMIC64_SELFTEST is not set
- # CONFIG_SAMPLES is not set
- # CONFIG_BOOTPARAM is not set
-
-@@ -1455,15 +1675,16 @@ CONFIG_DEBUG_MEMORY_INIT=y
- # Security options
- #
- # CONFIG_KEYS is not set
-+# CONFIG_SECURITY_DMESG_RESTRICT is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITYFS is not set
--# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_DEFAULT_SECURITY_DAC=y
-+CONFIG_DEFAULT_SECURITY=""
- CONFIG_CRYPTO=y
-
- #
- # Crypto core or helper
- #
--# CONFIG_CRYPTO_FIPS is not set
- CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_ALGAPI2=y
- CONFIG_CRYPTO_AEAD=y
-@@ -1473,10 +1694,13 @@ CONFIG_CRYPTO_BLKCIPHER2=y
- CONFIG_CRYPTO_HASH=y
- CONFIG_CRYPTO_HASH2=y
- CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_PCOMP2=y
- CONFIG_CRYPTO_MANAGER=y
- CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
- # CONFIG_CRYPTO_GF128MUL is not set
- # CONFIG_CRYPTO_NULL is not set
-+CONFIG_CRYPTO_WORKQUEUE=y
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_AUTHENC=y
- CONFIG_CRYPTO_TEST=m
-@@ -1504,11 +1728,13 @@ CONFIG_CRYPTO_CBC=y
- #
- CONFIG_CRYPTO_HMAC=y
- # CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_VMAC is not set
-
- #
- # Digest
- #
- CONFIG_CRYPTO_CRC32C=y
-+# CONFIG_CRYPTO_GHASH is not set
- # CONFIG_CRYPTO_MD4 is not set
- CONFIG_CRYPTO_MD5=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
-@@ -1525,9 +1751,9 @@ CONFIG_CRYPTO_SHA1=y
- #
- # Ciphers
- #
--# CONFIG_CRYPTO_AES is not set
-+CONFIG_CRYPTO_AES=y
- # CONFIG_CRYPTO_ANUBIS is not set
--# CONFIG_CRYPTO_ARC4 is not set
-+CONFIG_CRYPTO_ARC4=y
- # CONFIG_CRYPTO_BLOWFISH is not set
- # CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_CAST5 is not set
-@@ -1545,22 +1771,19 @@ CONFIG_CRYPTO_DES=y
- # Compression
- #
- # CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_ZLIB is not set
- # CONFIG_CRYPTO_LZO is not set
-
- #
- # Random Number Generation
- #
- # CONFIG_CRYPTO_ANSI_CPRNG is not set
--
--#
--# OCF Configuration
--#
--# CONFIG_OCF_OCF is not set
--
--#
--# Talitos Driver
--#
--# CONFIG_CRYPTO_HW is not set
-+# CONFIG_CRYPTO_USER_API_HASH is not set
-+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-+CONFIG_CRYPTO_HW=y
-+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-+CONFIG_CRYPTO_DEV_CF_TALITOS=y
-+# CONFIG_BINARY_PRINTF is not set
-
- #
- # Library routines
-@@ -1576,7 +1799,10 @@ CONFIG_CRC32=y
- CONFIG_LIBCRC32C=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
--CONFIG_PLIST=y
-+# CONFIG_XZ_DEC is not set
-+# CONFIG_XZ_DEC_BCJ is not set
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
-+CONFIG_NLATTR=y
-+CONFIG_GENERIC_ATOMIC64=y
diff --git a/target/linux/coldfire/patches/100-kernel-2.6.38-Fix-FEC-driver-bugs-for-MCF547x-MCF548x.patch b/target/linux/coldfire/patches/100-kernel-2.6.38-Fix-FEC-driver-bugs-for-MCF547x-MCF548x.patch
deleted file mode 100644
index e7696e2..0000000
--- a/target/linux/coldfire/patches/100-kernel-2.6.38-Fix-FEC-driver-bugs-for-MCF547x-MCF548x.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From 92b8d976e58fe5e6eb97aedcaa46e80c924fbc04 Mon Sep 17 00:00:00 2001
-From: Wang Huan <wanghuan@zch06.freescale.net>
-Date: Mon, 5 Sep 2011 08:59:46 +0800
-Subject: [PATCH] Fix FEC driver bugs for MCF547x/MCF548x
-
-This patch fixed kernel panic during flood ping with huge packets.
-It also fixed the data integrity errors when running iozone on an
-NFSv3-mounted file system.
-
-Signed-off-by: Jason Jin <jason.jin@freescale.com>
----
- arch/m68k/include/asm/cf_548x_cacheflush.h | 45 ++++++++++++++++++++++++---
- drivers/net/fec_m547x.c | 18 +++++-----
- 2 files changed, 49 insertions(+), 14 deletions(-)
-
---- a/arch/m68k/include/asm/cf_548x_cacheflush.h
-+++ b/arch/m68k/include/asm/cf_548x_cacheflush.h
-@@ -27,8 +27,8 @@
- unsigned long end_set; \
- \
- start_set = 0; \
-- end_set = (unsigned long)LAST_DCACHE_ADDR; \
-- \
-+ end_set = (unsigned long)LAST_ICACHE_ADDR; \
-+ asm("nop"); \
- for (set = start_set; set <= end_set; set += (0x10 - 3)) {\
- asm volatile("cpushl %%ic,(%0)\n" \
- "\taddq%.l #1,%0\n" \
-@@ -48,7 +48,7 @@
- \
- start_set = 0; \
- end_set = (unsigned long)LAST_DCACHE_ADDR; \
-- \
-+ asm("nop"); \
- for (set = start_set; set <= end_set; set += (0x10 - 3)) { \
- asm volatile("cpushl %%dc,(%0)\n" \
- "\taddq%.l #1,%0\n" \
-@@ -68,7 +68,7 @@
- \
- start_set = 0; \
- end_set = (unsigned long)LAST_DCACHE_ADDR; \
-- \
-+ asm("nop"); \
- for (set = start_set; set <= end_set; set += (0x10 - 3)) { \
- asm volatile("cpushl %%bc,(%0)\n" \
- "\taddq%.l #1,%0\n" \
-@@ -240,12 +240,47 @@ extern inline void flush_icache_range(un
- }
- }
-
-+static inline void flush_dcache_range(unsigned long address,
-+ unsigned long endaddr)
-+{
-+ unsigned long set;
-+ unsigned long start_set;
-+ unsigned long end_set;
-+
-+ start_set = address & _DCACHE_SET_MASK;
-+ end_set = endaddr & _DCACHE_SET_MASK;
-+
-+ if (start_set > end_set) {
-+ /* from the begining to the lowest address */
-+ for (set = 0; set <= end_set; set += (0x10 - 3)) {
-+ asm volatile("cpushl %%dc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%dc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%dc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set));
-+ }
-+ /* next loop will finish the cache ie pass the hole */
-+ end_set = LAST_ICACHE_ADDR;
-+ }
-+ for (set = start_set; set <= end_set; set += (0x10 - 3)) {
-+ asm volatile("cpushl %%dc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%dc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%dc,(%0)\n"
-+ "\taddq%.l #1,%0\n"
-+ "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set));
-+ }
-+}
-+
- static inline void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr,
- void *dst, void *src, int len)
- {
- memcpy(dst, src, len);
-- flush_icache_user_page(vma, page, vaddr, len);
-+ flush_dcache();
- }
- static inline void copy_from_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr,
---- a/drivers/net/fec_m547x.c
-+++ b/drivers/net/fec_m547x.c
-@@ -34,7 +34,7 @@
- #include <asm/m5485sram.h>
- #include <asm/virtconvert.h>
- #include <asm/irq.h>
--
-+#include <asm/cf_cacheflush.h>
- #include "fec_m547x.h"
-
- #ifdef CONFIG_FEC_548x_ENABLE_FEC2
-@@ -97,7 +97,7 @@ static void fec_interrupt_fec_rx_handler
- static irqreturn_t fec_interrupt_handler(int irq, void *dev_id);
- static void fec_interrupt_fec_tx_handler_fec0(void);
- static void fec_interrupt_fec_rx_handler_fec0(void);
--static void fec_interrupt_fec_reinit(unsigned long data);
-+static void fec_interrupt_fec_reinit(struct net_device *dev);
-
- /* default fec0 address */
- unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 };
-@@ -145,6 +145,7 @@ static int coldfire_fec_mdio_read(struct
- #ifdef CONFIG_FEC_548x_SHARED_PHY
- unsigned long base_addr = (unsigned long)FEC_BASE_ADDR_FEC0;
- #else
-+ struct net_device *dev = bus->priv;
- unsigned long base_addr = (unsigned long) dev->base_addr;
- #endif
- int tries = 100;
-@@ -179,6 +180,7 @@ static int coldfire_fec_mdio_write(struc
- #ifdef CONFIG_FEC_548x_SHARED_PHY
- unsigned long base_addr = (unsigned long)FEC_BASE_ADDR_FEC0;
- #else
-+ struct net_device *dev = bus->priv;
- unsigned long base_addr = (unsigned long) dev->base_addr;
- #endif
- int tries = 100;
-@@ -394,9 +396,6 @@ static int mcf547x_fec_open(struct net_d
-
- dma_connect(channel, (int) fp->fecpriv_interrupt_fec_tx_handler);
-
-- /* init tasklet for controller reinitialization */
-- tasklet_init(&fp->fecpriv_tasklet_reinit,
-- fec_interrupt_fec_reinit, (unsigned long) dev);
-
- /* Reset FIFOs */
- FEC_FECFRST(base_addr) |= FEC_SW_RST | FEC_RST_CTL;
-@@ -790,6 +789,8 @@ static int mcf547x_fec_start_xmit(struct
-
- /* flush data cache before initializing
- * the descriptor and starting DMA */
-+ flush_dcache_range(virt_to_phys(data_aligned),
-+ virt_to_phys(data_aligned) + skb->len);
-
- spin_lock_irq(&fp->fecpriv_lock);
-
-@@ -1308,7 +1309,7 @@ irqreturn_t fec_interrupt_handler(int ir
- netif_stop_queue(dev);
-
- /* execute reinitialization as tasklet */
-- tasklet_schedule(&fp->fecpriv_tasklet_reinit);
-+ fec_interrupt_fec_reinit(dev);
-
- fp->fecpriv_stat.rx_dropped++;
- }
-@@ -1343,10 +1344,9 @@ irqreturn_t fec_interrupt_handler(int ir
- * when controller must be reinitialized.
- *
- *************************************************************************/
--void fec_interrupt_fec_reinit(unsigned long data)
-+void fec_interrupt_fec_reinit(struct net_device *dev)
- {
- int i;
-- struct net_device *dev = (struct net_device *)data;
- struct fec_priv *fp = netdev_priv(dev);
- unsigned long base_addr = (unsigned long) dev->base_addr;
-
-@@ -1385,7 +1385,7 @@ void fec_interrupt_fec_reinit(unsigned l
- fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
-
- /* flush entire data cache before restarting the DMA */
--
-+ flush_dcache();
- /* restart DMA from beginning */
- MCD_startDma(fp->fecpriv_fec_rx_channel,
- (char *) fp->fecpriv_rxdesc, 0,
diff --git a/target/linux/coldfire/patches/101-kernel-2.6.38-Fix-LCD-framebuffer-driver-data-swap-bug-for-MCF5441.patch b/target/linux/coldfire/patches/101-kernel-2.6.38-Fix-LCD-framebuffer-driver-data-swap-bug-for-MCF5441.patch
deleted file mode 100644
index b948d1f..0000000
--- a/target/linux/coldfire/patches/101-kernel-2.6.38-Fix-LCD-framebuffer-driver-data-swap-bug-for-MCF5441.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 633531cdbaa3ed70a364db78fd7f8ae11da3e394 Mon Sep 17 00:00:00 2001
-From: Wang Huan <wanghuan@zch06.freescale.net>
-Date: Wed, 14 Sep 2011 17:40:41 +0800
-Subject: [PATCH] Fix LCD framebuffer driver data swap bug for MCF54418
-
-This patch fixed LCD framebuffer driver data swap bug
-for MCF54418.
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- drivers/video/fsl-ssd1289-fb.c | 13 ++++++++++---
- 1 files changed, 10 insertions(+), 3 deletions(-)
-
---- a/drivers/video/fsl-ssd1289-fb.c
-+++ b/drivers/video/fsl-ssd1289-fb.c
-@@ -54,8 +54,10 @@ static int ssd1289_spi_writeblock(struct
- for (i = 0; i < SPI_LCD_BLOCK_SIZE; i++) {
- if (i % 2 == 0)
- spi_block_buffer[i] = 0x01;
-- else if (flag == 1)
-- spi_block_buffer[i] = *(daddr + (i >> 1));
-+ else if ((flag == 1) && (i % 4 == 1))
-+ spi_block_buffer[i] = *(daddr + (i >> 1) + 1);
-+ else if ((flag == 1) && (i % 4 == 3))
-+ spi_block_buffer[i] = *(daddr + (i >> 1) - 1);
- else if (flag == 0)
- spi_block_buffer[i] = 0;
- }
-@@ -331,6 +333,9 @@ static int ssd1289fbd(void *arg)
- int i;
- unsigned short *buf_p;
- struct fsl_ssd1289_fb_info *fbinfo = info->par;
-+#if defined(CONFIG_SSD1289_FLEXBUS_MODE)
-+ unsigned short tmp;
-+#endif
- #if defined(CONFIG_SSD1289_SPI_MODE)
- unsigned char *bufspi_p;
- int count;
-@@ -344,7 +349,9 @@ static int ssd1289fbd(void *arg)
-
- #if defined(CONFIG_SSD1289_FLEXBUS_MODE)
- for (i = 0; i < info->screen_size; i += 2) {
-- ssd1289_write(info, *buf_p, 1);
-+ tmp = ((((*buf_p) & 0x00ff) << 8) |
-+ (((*buf_p) & 0xff00) >> 8));
-+ ssd1289_write(info, tmp, 1);
- buf_p++;
- }
- #elif defined(CONFIG_SSD1289_SPI_MODE)
diff --git a/target/linux/coldfire/patches/102-kernel-2.6.38-Fix-SD-MMC-SDIO-over-SPI-driver-bug-when-reinserting.patch b/target/linux/coldfire/patches/102-kernel-2.6.38-Fix-SD-MMC-SDIO-over-SPI-driver-bug-when-reinserting.patch
deleted file mode 100644
index 4ec2d21..0000000
--- a/target/linux/coldfire/patches/102-kernel-2.6.38-Fix-SD-MMC-SDIO-over-SPI-driver-bug-when-reinserting.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 78f4df7dfe913c68b8329dd84a24325b8f34217b Mon Sep 17 00:00:00 2001
-From: Wang Huan <wanghuan@zch06.freescale.net>
-Date: Mon, 8 Aug 2011 09:14:45 +0800
-Subject: [PATCH] Fix SD/MMC/SDIO over SPI driver bug when reinserting as module
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5445x/devices.c | 8 ++++++++
- 1 files changed, 8 insertions(+), 0 deletions(-)
-
---- a/arch/m68k/coldfire/m5445x/devices.c
-+++ b/arch/m68k/coldfire/m5445x/devices.c
-@@ -136,6 +136,13 @@ int mmc_spi_init(struct device *mmc_spi_
- return 0;
- }
-
-+void mmc_spi_exit(struct device *mmc_spi_device, void *irq_privatedata)
-+{
-+#if defined(CONFIG_M54451_SD_HW_DETECT)
-+ free_irq(64 + 7, irq_privatedata);
-+#endif
-+}
-+
- static struct coldfire_dspi_chip dspi_sd_chip_info = {
- .mode = SPI_MODE_0,
- .bits_per_word = 8,
-@@ -154,6 +161,7 @@ static struct coldfire_dspi_chip dspi_sd
- static struct mmc_spi_platform_data mcf54451_mmc_pdata = {
- .ocr_mask = MMC_VDD_33_34,
- .init = mmc_spi_init,
-+ .exit = mmc_spi_exit,
- };
- #endif
-
diff --git a/target/linux/coldfire/patches/103-kernel-2.6.38-Fix-i2c-driver-could-not-work-as-module.patch b/target/linux/coldfire/patches/103-kernel-2.6.38-Fix-i2c-driver-could-not-work-as-module.patch
deleted file mode 100644
index 8a10ad8..0000000
--- a/target/linux/coldfire/patches/103-kernel-2.6.38-Fix-i2c-driver-could-not-work-as-module.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 358154a6d0dd87305c6af92810220f8a17641c07 Mon Sep 17 00:00:00 2001
-From: Wang Huan <wanghuan@zch06.freescale.net>
-Date: Mon, 8 Aug 2011 10:49:53 +0800
-Subject: [PATCH] Fix i2c driver could not work as module
-
-Signed-off-by: Alison Wang <b18965@freescale.com>
----
- arch/m68k/coldfire/m5445x/devices.c | 4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/m68k/coldfire/m5445x/devices.c
-+++ b/arch/m68k/coldfire/m5445x/devices.c
-@@ -426,7 +426,7 @@ static inline void mcf5445x_init_pata(vo
- /*
- * I2C
- */
--#if defined(CONFIG_I2C)
-+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- static struct resource coldfire_i2c_resources[] = {
- { /* I/O */
- .start = 0xFC058000,
-@@ -464,7 +464,7 @@ static int __init mcf5445x_init_devices(
- mcf5445x_init_pata();
- #endif
-
--#if defined(CONFIG_I2C)
-+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- mcf5445x_init_i2c();
- #endif
- return 0;
diff --git a/target/linux/coldfire/patches/200-fec_select_phylib.patch b/target/linux/coldfire/patches/200-fec_select_phylib.patch
deleted file mode 100644
index 4207d98..0000000
--- a/target/linux/coldfire/patches/200-fec_select_phylib.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -1975,6 +1975,7 @@
- config FEC_548x
- tristate "MCF547x/MCF548x Fast Ethernet Controller support"
- depends on M547X_8X
-+ select PHYLIB
- help
- The MCF547x and MCF548x have a built-in Fast Ethernet Controller.
- Saying Y here will include support for this device in the kernel.