summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--package/kernel/switch/Makefile59
-rw-r--r--package/kernel/switch/files/switch.sh53
-rw-r--r--package/kernel/switch/src/Makefile18
-rw-r--r--package/kernel/switch/src/etc53xx.h624
-rw-r--r--package/kernel/switch/src/gpio.h25
-rw-r--r--package/kernel/switch/src/switch-adm.c596
-rw-r--r--package/kernel/switch/src/switch-core.c527
-rw-r--r--package/kernel/switch/src/switch-core.h55
-rw-r--r--package/kernel/switch/src/switch-robo.c892
-rw-r--r--package/network/config/swconfig/Makefile2
10 files changed, 1 insertions, 2850 deletions
diff --git a/package/kernel/switch/Makefile b/package/kernel/switch/Makefile
deleted file mode 100644
index 95d7750..0000000
--- a/package/kernel/switch/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=kmod-switch
-PKG_RELEASE:=6
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/switch
- SUBMENU:=Other modules
- DEPENDS:=@TARGET_brcm47xx @!LINUX_3_10
- TITLE:=Switch drivers
- FILES:= \
- $(PKG_BUILD_DIR)/switch-core.ko \
- $(PKG_BUILD_DIR)/switch-adm.ko \
- $(PKG_BUILD_DIR)/switch-robo.ko
- AUTOLOAD:=$(call AutoLoad,20,switch-core switch-robo switch-adm,1)
-endef
-
-define KernelPackage/switch/description
- This package contains switch drivers for ADM6996L and BCM53XX RoboSwitch.
-endef
-
-define Build/Prepare
- mkdir -p $(PKG_BUILD_DIR)
- $(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
- $(MAKE) -C "$(LINUX_DIR)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- ARCH="$(LINUX_KARCH)" \
- SUBDIRS="$(PKG_BUILD_DIR)" \
- EXTRA_CFLAGS="$(BUILDFLAGS)" \
- modules
-endef
-
-define Build/InstallDev
- mkdir -p $(1)/usr/include
- $(CP) ./src/switch-core.h $(1)/usr/include/
-endef
-
-define Build/UninstallDev
- rm -f $(1)/usr/include/switch-core.h
-endef
-
-define KernelPackage/switch/install
- $(INSTALL_DIR) $(1)/lib/network/
- $(INSTALL_BIN) ./files/switch.sh $(1)/lib/network/
-endef
-
-$(eval $(call KernelPackage,switch))
diff --git a/package/kernel/switch/files/switch.sh b/package/kernel/switch/files/switch.sh
deleted file mode 100644
index 2563d41..0000000
--- a/package/kernel/switch/files/switch.sh
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-
-setup_switch_hw() {
- local dev="$1"
- local enable reset evlan
-
- config_get_bool enable "$dev" enable 1
- config_get_bool evlan "$dev" enable_vlan 1
- config_get_bool reset "$dev" reset 1
-
- local proc="/proc/switch/$dev"
- [ -d "$proc" ] && {
- ifconfig "$dev" up
- echo "$reset" > "$proc/reset"
- echo "$evlan" > "$proc/enable_vlan"
- [ -f "$proc/enable" ] && echo "$enable" > "$proc/enable"
- }
-
- local vlan
- for vlan in `seq 0 15`; do
- proc="/proc/switch/$dev/vlan/$vlan/ports"
- [ -f "$proc" ] && echo "" > "$proc"
- done
-}
-
-setup_switch_vlan() {
- local s="$1"
- local dev vlan ports
-
- config_get dev "$s" device
- config_get vlan "$s" vlan
- config_get ports "$s" ports
-
- [ -n "$dev" ] && [ -n "$vlan" ] && {
- ports="${ports%\*}"
-
- [ "$_vlan_pvid_set" = 1 ] || {
- ports="$ports*"
- _vlan_pvid_set=1
- }
-
- local proc="/proc/switch/$dev/vlan/$vlan/ports"
- [ -f "$proc" ] && echo "$ports" > "$proc"
- }
-}
-
-setup_switch() {
- _vlan_pvid_set=0
- config_load network
- config_foreach setup_switch_hw switch
- config_foreach setup_switch_vlan switch_vlan
-}
diff --git a/package/kernel/switch/src/Makefile b/package/kernel/switch/src/Makefile
deleted file mode 100644
index b6934cc..0000000
--- a/package/kernel/switch/src/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for switch driver
-#
-# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version
-# 2 of the License, or (at your option) any later version.
-#
-
-obj-m := switch-core.o switch-adm.o switch-robo.o
-
-ifeq ($(MAKING_MODULES),1)
-export-objs := switch-core.o
-
--include $(TOPDIR)/Rules.make
-endif
diff --git a/package/kernel/switch/src/etc53xx.h b/package/kernel/switch/src/etc53xx.h
deleted file mode 100644
index 0cd217e..0000000
--- a/package/kernel/switch/src/etc53xx.h
+++ /dev/null
@@ -1,624 +0,0 @@
-/*
- * Broadcom Home Gateway Reference Design
- * BCM53xx Register definitions
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef __BCM535M_H_
-#define __BCM535M_H_
-
-/* ROBO embedded device type */
-#define ROBO_DEV_5380 1
-#define ROBO_DEV_5365 2
-#define ROBO_DEV_5350 3
-#define ROBO_DEV_53115 4
-
-/* BCM5325m GLOBAL PAGE REGISTER MAP */
-#ifndef _CFE_
-#pragma pack(1)
-#endif
-
-/* BCM5325m Serial Management Port (SMP) Page offsets */
-#define ROBO_CTRL_PAGE 0x00 /* Control registers */
-#define ROBO_STAT_PAGE 0x01 /* Status register */
-#define ROBO_MGMT_PAGE 0x02 /* Management Mode registers */
-#define ROBO_MIB_AC_PAGE 0x03 /* MIB Autocast registers */
-#define ROBO_ARLCTRL_PAGE 0x04 /* ARL Control Registers */
-#define ROBO_ARLIO_PAGE 0x05 /* ARL Access Registers */
-#define ROBO_FRAMEBUF_PAGE 0x06 /* Management frame access registers */
-#define ROBO_MEM_ACCESS_PAGE 0x08 /* Memory access registers */
-
-/* PHY Registers */
-#define ROBO_PORT0_MII_PAGE 0x10 /* Port 0 MII Registers */
-#define ROBO_PORT1_MII_PAGE 0x11 /* Port 1 MII Registers */
-#define ROBO_PORT2_MII_PAGE 0x12 /* Port 2 MII Registers */
-#define ROBO_PORT3_MII_PAGE 0x13 /* Port 3 MII Registers */
-#define ROBO_PORT4_MII_PAGE 0x14 /* Port 4 MII Registers */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_MII_PAGE 0x15 /* Port 5 MII Registers */
-#define ROBO_PORT6_MII_PAGE 0x16 /* Port 6 MII Registers */
-#define ROBO_PORT7_MII_PAGE 0x17 /* Port 7 MII Registers */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */
-#define ROBO_ALL_PORT_PAGE 0x19 /* All ports MII Registers (broadcast)*/
-
-/* MAC Statistics registers */
-#define ROBO_PORT0_MIB_PAGE 0x20 /* Port 0 10/100 MIB Statistics */
-#define ROBO_PORT1_MIB_PAGE 0x21 /* Port 1 10/100 MIB Statistics */
-#define ROBO_PORT2_MIB_PAGE 0x22 /* Port 2 10/100 MIB Statistics */
-#define ROBO_PORT3_MIB_PAGE 0x23 /* Port 3 10/100 MIB Statistics */
-#define ROBO_PORT4_MIB_PAGE 0x24 /* Port 4 10/100 MIB Statistics */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_MIB_PAGE 0x25 /* Port 5 10/100 MIB Statistics */
-#define ROBO_PORT6_MIB_PAGE 0x26 /* Port 6 10/100 MIB Statistics */
-#define ROBO_PORT7_MIB_PAGE 0x27 /* Port 7 10/100 MIB Statistics */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_MIB_PAGE 0x28 /* Inverse MII Port MIB Statistics */
-
-/* Quality of Service (QoS) Registers */
-#define ROBO_QOS_PAGE 0x30 /* QoS Registers */
-
-/* VLAN Registers */
-#define ROBO_VLAN_PAGE 0x34 /* VLAN Registers */
-
-/* Note SPI Data/IO Registers not used */
-#define ROBO_SPI_DATA_IO_0_PAGE 0xf0 /* SPI Data I/O 0 */
-#define ROBO_SPI_DATA_IO_1_PAGE 0xf1 /* SPI Data I/O 1 */
-#define ROBO_SPI_DATA_IO_2_PAGE 0xf2 /* SPI Data I/O 2 */
-#define ROBO_SPI_DATA_IO_3_PAGE 0xf3 /* SPI Data I/O 3 */
-#define ROBO_SPI_DATA_IO_4_PAGE 0xf4 /* SPI Data I/O 4 */
-#define ROBO_SPI_DATA_IO_5_PAGE 0xf5 /* SPI Data I/O 5 */
-#define ROBO_SPI_DATA_IO_6_PAGE 0xf6 /* SPI Data I/O 6 */
-#define ROBO_SPI_DATA_IO_7_PAGE 0xf7 /* SPI Data I/O 7 */
-
-#define ROBO_SPI_STATUS_PAGE 0xfe /* SPI Status Registers */
-#define ROBO_PAGE_PAGE 0xff /* Page Registers */
-
-
-/* BCM5325m CONTROL PAGE (0x00) REGISTER MAP : 8bit (byte) registers */
-typedef struct _ROBO_PORT_CTRL_STRUC
-{
- unsigned char rx_disable:1; /* rx disable */
- unsigned char tx_disable:1; /* tx disable */
- unsigned char rsvd:3; /* reserved */
- unsigned char stp_state:3; /* spanning tree state */
-} ROBO_PORT_CTRL_STRUC;
-
-#define ROBO_PORT0_CTRL 0x00 /* 10/100 Port 0 Control */
-#define ROBO_PORT1_CTRL 0x01 /* 10/100 Port 1 Control */
-#define ROBO_PORT2_CTRL 0x02 /* 10/100 Port 2 Control */
-#define ROBO_PORT3_CTRL 0x03 /* 10/100 Port 3 Control */
-#define ROBO_PORT4_CTRL 0x04 /* 10/100 Port 4 Control */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_CTRL 0x05 /* 10/100 Port 5 Control */
-#define ROBO_PORT6_CTRL 0x06 /* 10/100 Port 6 Control */
-#define ROBO_PORT7_CTRL 0x07 /* 10/100 Port 7 Control */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_CTRL 0x08 /* 10/100 Port 8 Control */
-#define ROBO_SMP_CTRL 0x0a /* SMP Control register */
-#define ROBO_SWITCH_MODE 0x0b /* Switch Mode Control */
-#define ROBO_PORT_OVERRIDE_CTRL 0x0e /* Port state override */
-#define ROBO_PORT_OVERRIDE_RVMII (1<<4) /* Bit 4 enables RvMII */
-#define ROBO_PD_MODE_CTRL 0x0f /* Power-down mode control */
-#define ROBO_IP_MULTICAST_CTRL 0x21 /* IP Multicast control */
-
-/* BCM5325m STATUS PAGE (0x01) REGISTER MAP : 16bit/48bit registers */
-#define ROBO_HALF_DUPLEX 0
-#define ROBO_FULL_DUPLEX 1
-
-#define ROBO_LINK_STAT_SUMMARY 0x00 /* Link Status Summary: 16bit */
-#define ROBO_LINK_STAT_CHANGE 0x02 /* Link Status Change: 16bit */
-#define ROBO_SPEED_STAT_SUMMARY 0x04 /* Port Speed Summary: 16bit*/
-#define ROBO_DUPLEX_STAT_SUMMARY 0x06 /* Duplex Status Summary: 16bit */
-#define ROBO_PAUSE_STAT_SUMMARY 0x08 /* PAUSE Status Summary: 16bit */
-#define ROBO_SOURCE_ADDR_CHANGE 0x0C /* Source Address Change: 16bit */
-#define ROBO_LSA_PORT0 0x10 /* Last Source Addr, Port 0: 48bits*/
-#define ROBO_LSA_PORT1 0x16 /* Last Source Addr, Port 1: 48bits*/
-#define ROBO_LSA_PORT2 0x1c /* Last Source Addr, Port 2: 48bits*/
-#define ROBO_LSA_PORT3 0x22 /* Last Source Addr, Port 3: 48bits*/
-#define ROBO_LSA_PORT4 0x28 /* Last Source Addr, Port 4: 48bits*/
-#define ROBO_LSA_IM_PORT 0x40 /* Last Source Addr, IM Port: 48bits*/
-
-/* BCM5325m MANAGEMENT MODE REGISTERS (0x02) REGISTER MAP: 8/48 bit regs*/
-typedef struct _ROBO_GLOBAL_CONFIG_STRUC
-{
- unsigned char resetMIB:1; /* reset MIB counters */
- unsigned char rxBPDU:1; /* receive BDPU enable */
- unsigned char rsvd1:2; /* reserved */
- unsigned char MIBacHdrCtrl:1; /* MIB autocast header control */
- unsigned char MIBac:1; /* MIB autocast enable */
- unsigned char frameMgmtPort:2; /* frame management port */
-} ROBO_GLOBAL_CONFIG_STRUC;
-#define ROBO_GLOBAL_CONFIG 0x00 /* Global Management Config: 8bit*/
-#define ROBO_MGMT_PORT_ID 0x02 /* Management Port ID: 8bit*/
-#define ROBO_RMON_MIB_STEER 0x04 /* RMON Mib Steering: 16bit */
-#define ROBO_MIB_MODE_SELECT 0x04 /* MIB Mode select: 16bit (BCM5350) */
-#define ROBO_AGE_TIMER_CTRL 0x06 /* Age time control: 32bit */
-#define ROBO_MIRROR_CAP_CTRL 0x10 /* Mirror Capture : 16bit */
-#define ROBO_MIRROR_ING_CTRL 0x12 /* Mirror Ingress Control: 16bit */
-#define ROBO_MIRROR_ING_DIV_CTRL 0x14 /* Mirror Ingress Divider: 16bit */
-#define ROBO_MIRROR_ING_MAC_ADDR 0x16 /* Ingress Mirror MAC Addr: 48bit*/
-#define ROBO_MIRROR_EGR_CTRL 0x1c /* Mirror Egress Control: 16bit */
-#define ROBO_MIRROR_EGR_DIV_CTRL 0x1e /* Mirror Egress Divider: 16bit */
-#define ROBO_MIRROR_EGR_MAC_ADDR 0x20 /* Egress Mirror MAC Addr: 48bit*/
-
-/* BCM5325m MIB AUTOCAST REGISTERS (0x03) REGISTER MAP: 8/16/48 bit regs */
-#define ROBO_MIB_AC_PORT 0x00 /* MIB Autocast Port: 16bit */
-#define ROBO_MIB_AC_HDR_PTR 0x02 /* MIB Autocast Header pointer:16bit*/
-#define ROBO_MIB_AC_HDR_LEN 0x04 /* MIB Autocast Header Len: 16bit */
-#define ROBO_MIB_AC_DA 0x06 /* MIB Autocast DA: 48bit */
-#define ROBO_MIB_AC_SA 0x0c /* MIB Autocast SA: 48bit */
-#define ROBO_MIB_AC_TYPE 0x12 /* MIB Autocast Type: 16bit */
-#define ROBO_MIB_AC_RATE 0x14 /* MIB Autocast Rate: 8bit */
-#define ROBO_GET_AC_RATE(secs) ((secs)*10)
-#define ROBO_AC_RATE_MAX 0xff
-#define ROBO_AC_RATE_DEFAULT 0x64 /* 10 secs */
-typedef struct _ROBO_MIB_AC_STRUCT
-{
- unsigned char opcode:4; /* Tx MIB Autocast opcode */
- unsigned char portno:4; /* zero-based port no. */
- unsigned char portstate:8; /* port state */
- unsigned long long TxOctets;
- unsigned int TxDropPkts;
- unsigned int rsvd;
- unsigned int TxBroadcastPkts;
- unsigned int TxMulticastPkts;
- unsigned int TxUnicastPkts;
- unsigned int TxCollisions;
- unsigned int TxSingleCollision;
- unsigned int TxMultiCollision;
- unsigned int TxDeferredTransmit;
- unsigned int TxLateCollision;
- unsigned int TxExcessiveCollision;
- unsigned int TxFrameInDiscards;
- unsigned int TxPausePkts;
- unsigned int rsvd1[2];
- unsigned long long RxOctets;
- unsigned int RxUndersizePkts;
- unsigned int RxPausePkts;
- unsigned int RxPkts64Octets;
- unsigned int RxPkts64to127Octets;
- unsigned int RxPkts128to255Octets;
- unsigned int RxPkts256to511Octets;
- unsigned int RxPkts512to1023Octets;
- unsigned int RxPkts1024to1522Octets;
- unsigned int RxOversizePkts;
- unsigned int RxJabbers;
- unsigned int RxAlignmentErrors;
- unsigned int RxFCSErrors;
- unsigned long long RxGoodOctets;
- unsigned int RxDropPkts;
- unsigned int RxUnicastPkts;
- unsigned int RxMulticastPkts;
- unsigned int RxBroadcastPkts;
- unsigned int RxSAChanges;
- unsigned int RxFragments;
- unsigned int RxExcessSizeDisc;
- unsigned int RxSymbolError;
-} ROBO_MIB_AC_STRUCT;
-
-/* BCM5325m ARL CONTROL REGISTERS (0x04) REGISTER MAP: 8/16/48/64 bit regs */
-#define ROBO_ARL_CONFIG 0x00 /* ARL Global Configuration: 8bit*/
-#define ROBO_BPDU_MC_ADDR_REG 0x04 /* BPDU Multicast Address Reg:64bit*/
-#define ROBO_MULTIPORT_ADDR_1 0x10 /* Multiport Address 1: 48 bits*/
-#define ROBO_MULTIPORT_VECTOR_1 0x16 /* Multiport Vector 1: 16 bits */
-#define ROBO_MULTIPORT_ADDR_2 0x20 /* Multiport Address 2: 48 bits*/
-#define ROBO_MULTIPORT_VECTOR_2 0x26 /* Multiport Vector 2: 16 bits */
-#define ROBO_SECURE_SRC_PORT_MASK 0x30 /* Secure Source Port Mask: 16 bits*/
-#define ROBO_SECURE_DST_PORT_MASK 0x32 /* Secure Dest Port Mask: 16 bits */
-
-
-/* BCM5325m ARL IO REGISTERS (0x05) REGISTER MAP: 8/16/48/64 bit regs */
-#define ARL_TABLE_WRITE 0 /* for read/write state in control reg */
-#define ARL_TABLE_READ 1 /* for read/write state in control reg */
-#ifdef BCM5380
-#define ARL_VID_BYTES 2 /* number of bytes for VID */
-#else
-#define ARL_VID_BYTES 1 /* number of bytes for VID */
-#endif
-typedef struct _ROBO_ARL_RW_CTRL_STRUC
-{
- unsigned char ARLrw:1; /* ARL read/write (1=read) */
- unsigned char rsvd:6; /* reserved */
- unsigned char ARLStart:1; /* ARL start/done (1=start) */
-} ROBO_ARL_RW_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_CTRL_STRUC
-{
- unsigned char valid:1; /* ARL search result valid */
- unsigned char rsvd:6; /* reserved */
- unsigned char ARLStart:1; /* ARL start/done (1=start) */
-} ROBO_ARL_SEARCH_CTRL_STRUC;
-typedef struct _ROBO_ARL_ENTRY_CTRL_STRUC
-{
- unsigned char portID:4; /* port id */
- unsigned char chipID:2; /* chip id */
- unsigned char rsvd:5; /* reserved */
- unsigned char prio:2; /* priority */
- unsigned char age:1; /* age */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
-} ROBO_ARL_ENTRY_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_CTRL_STRUC
-{
- unsigned char portID:4; /* port id */
- unsigned char rsvd:1; /* reserved */
- unsigned char vid:8; /* vlan id */
- unsigned char age:1; /* age */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
-} ROBO_ARL_SEARCH_RESULT_CTRL_STRUC;
-typedef struct _ROBO_ARL_ENTRY_MAC_STRUC
-{
- unsigned char macBytes[6]; /* MAC address */
-} ROBO_ARL_ENTRY_MAC_STRUC;
-
-typedef struct _ROBO_ARL_ENTRY_STRUC
-{
- ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
- ROBO_ARL_ENTRY_CTRL_STRUC ctrl; /* control bits */
-} ROBO_ARL_ENTRY_STRUC;
-
-typedef struct _ROBO_ARL_SEARCH_RESULT_STRUC
-{
- ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
- ROBO_ARL_SEARCH_RESULT_CTRL_STRUC ctrl; /* control bits */
-} ROBO_ARL_SEARCH_RESULT_STRUC;
-
-/* multicast versions of ARL entry structs */
-typedef struct _ROBO_ARL_ENTRY_MCAST_CTRL_STRUC
-{
- unsigned int portMask:12;/* multicast port mask */
- unsigned char prio:1; /* priority */
- unsigned char gigPort:1; /* gigabit port 1 mask */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
-} ROBO_ARL_ENTRY_MCAST_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC
-{
- unsigned int portMask:13; /* multicast port mask */
- unsigned char age:1; /* age */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
-} ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC;
-/* BCM5350 extension register */
-typedef struct _ROBO_ARL_SEARCH_RESULT_EXTENSION
-{
- unsigned int prio:2; /* priority */
- unsigned int portMask:1; /* MSB (MII) of port mask for multicast */
- unsigned int reserved:5;
-} ROBO_ARL_SEARCH_RESULT_EXTENSION;
-
-typedef struct _ROBO_ARL_ENTRY_MCAST_STRUC
-{
- ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
- ROBO_ARL_ENTRY_MCAST_CTRL_STRUC ctrl; /* control bits */
-} ROBO_ARL_ENTRY_MCAST_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC
-{
- ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
- ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC ctrl; /* control bits */
-} ROBO_ARL_SEARCH_RESULT_MCAST_STRUC;
-
-#define ROBO_ARL_RW_CTRL 0x00 /* ARL Read/Write Control : 8bit */
-#define ROBO_ARL_MAC_ADDR_IDX 0x02 /* MAC Address Index: 48bit */
-#define ROBO_ARL_VID_TABLE_IDX 0x08 /* VID Table Address Index: 8bit */
-#define ROBO_ARL_ENTRY0 0x10 /* ARL Entry 0 : 64 bit */
-#define ROBO_ARL_ENTRY1 0x18 /* ARL Entry 1 : 64 bit */
-#define ROBO_ARL_SEARCH_CTRL 0x20 /* ARL Search Control: 8bit */
-#define ROBO_ARL_SEARCH_ADDR 0x22 /* ARL Search Address: 16bit */
-#define ROBO_ARL_SEARCH_RESULT 0x24 /* ARL Search Result: 64bit */
-#define ROBO_ARL_SEARCH_RESULT_EXT 0x2c /* ARL Search Result Extension (5350): 8bit */
-#define ROBO_ARL_VID_ENTRY0 0x30 /* ARL VID Entry 0: 64bit */
-#define ROBO_ARL_VID_ENTRY1 0x32 /* ARL VID Entry 1: 64bit */
-#define ROBO_ARL_SEARCH_CTRL_53115 0x50 /* ARL Search Control: 8bit */
-#define ROBO_ARL_SEARCH_ADDR_53115 0x51 /* ARL Search Address: 16bit */
-#define ROBO_ARL_SEARCH_RESULT_53115 0x60 /* ARL Search Result: 64bit */
-#define ROBO_ARL_SEARCH_RESULT_EXT_53115 0x68 /* ARL Search Result Extension (53115): 16bit */
-
-/* BCM5395/5397/5398/53115 */
-#define ROBO_VTBL_ACCESS 0x60 /* VLAN table access: 8bit */
-#define ROBO_VTBL_INDX 0x61 /* VLAN table address index: 16bit */
-#define ROBO_VTBL_ENTRY 0x63 /* VLAN table entry: 32bit */
-#define ROBO_VTBL_ACCESS_5395 0x80 /* VLAN table access: 8bit */
-#define ROBO_VTBL_INDX_5395 0x81 /* VLAN table address index: 16bit */
-#define ROBO_VTBL_ENTRY_5395 0x83 /* VLAN table entry: 32bit */
-
-/* BCM5325m MANAGEMENT FRAME REGISTERS (0x6) REGISTER MAP: 8/16 bit regs */
-#define ROBO_MGMT_FRAME_RD_DATA 0x00 /* Management Frame Read Data :8bit*/
-#define ROBO_MGMT_FRAME_WR_DATA 0x01 /* Management Frame Write Data:8bit*/
-#define ROBO_MGMT_FRAME_WR_CTRL 0x02 /* Write Control: 16bit */
-#define ROBO_MGMT_FRAME_RD_STAT 0x04 /* Read Status: 16bit */
-
-/* BCM5325m MEMORY ACCESS REGISTERS (Page 0x08) REGISTER MAP: 32 bit regs */
-#define MEM_TABLE_READ 1 /* for read/write state in mem access reg */
-#define MEM_TABLE_WRITE 0 /* for read/write state in mem access reg */
-#define MEM_TABLE_ACCESS_START 1 /* for mem access read/write start */
-#define MEM_TABLE_ACCESS_DONE 0 /* for mem access read/write done */
-#define VLAN_TABLE_ADDR 0x3800 /* BCM5380 only */
-#ifdef BCM5380
-#define NUM_ARL_TABLE_ENTRIES 4096 /* number of entries in ARL table */
-#define NUM_VLAN_TABLE_ENTRIES 2048 /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR 0 /* offset of ARL table start */
-#else
-#define NUM_ARL_TABLE_ENTRIES 2048 /* number of entries in ARL table */
-#define NUM_VLAN_TABLE_ENTRIES 256 /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR 0x3800 /* offset of ARL table start */
-/* corresponding values for 5350 */
-#define NUM_ARL_TABLE_ENTRIES_5350 1024 /* number of entries in ARL table (5350) */
-#define NUM_VLAN_TABLE_ENTRIES_5350 16 /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR_5350 0x1c00 /* offset of ARL table start (5350) */
-#endif
-#define NUM_ARL_TABLE_ENTRIES_53115 4096 /* number of entries in ARL table (53115) */
-#define NUM_VLAN_TABLE_ENTRIES_53115 4096 /* number of entries in VLAN table */
-typedef struct _ROBO_MEM_ACCESS_CTRL_STRUC
-{
- unsigned int memAddr:14; /* 64-bit memory address */
- unsigned char rsvd:4; /* reserved */
- unsigned char readEn:1; /* read enable (0 == write) */
- unsigned char startDone:1;/* memory access start/done */
- unsigned int rsvd1:12; /* reserved */
-} ROBO_MEM_ACCESS_CTRL_STRUC;
-typedef struct _ROBO_MEM_ACCESS_DATA_STRUC
-{
- unsigned int memData[2]; /* 64-bit data */
- unsigned short rsvd; /* reserved */
-} ROBO_MEM_ACCESS_DATA_STRUC;
-
-#ifdef BCM5380
-typedef struct _ROBO_ARL_TABLE_DATA_STRUC
-{
- unsigned char MACaddr[6]; /* MAC addr */
- unsigned int portID:4; /* port ID */
- unsigned int chipID:2; /* chip ID */
- unsigned int rsvd:6; /* reserved */
- unsigned int highPrio:1; /* high priority address */
- unsigned int age:1; /* entry accessed/learned since ageing process */
- unsigned int staticAddr:1;/* entry is static */
- unsigned int valid:1; /* entry is valid */
- unsigned int vid:12; /* vlan id */
- unsigned int rsvd2:4; /* reserved */
-} ROBO_ARL_TABLE_DATA_STRUC;
-#else
-typedef struct _ROBO_ARL_TABLE_DATA_STRUC
-{
- unsigned char MACaddr[6]; /* MAC addr */
- unsigned int portID:4; /* port ID */
- unsigned int chipID:2; /* chip ID */
- unsigned int rsvd:7; /* reserved */
- unsigned int age:1; /* entry accessed/learned since ageing process */
- unsigned int staticAddr:1;/* entry is static */
- unsigned int valid:1; /* entry is valid */
-} ROBO_ARL_TABLE_DATA_STRUC;
-#endif
-
-/* multicast format*/
-typedef struct _ROBO_ARL_TABLE_MCAST_DATA_STRUC
-{
- unsigned char MACaddr[6]; /* MAC addr */
- unsigned int portMask:12;/* multicast port mask */
- unsigned char prio:1; /* priority */
- unsigned char gigPort:1; /* gigabit port 1 mask */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
- unsigned int vid:12; /* vlan id */
- unsigned int rsvd2:4; /* reserved */
-} ROBO_ARL_TABLE_MCAST_DATA_STRUC;
-#define ROBO_MEM_ACCESS_CTRL 0x00 /* Memory Read/Write Control :32bit*/
-#define ROBO_MEM_ACCESS_DATA 0x04 /* Memory Read/Write Data:64bit*/
-
-/* BCM5325m SWITCH PORT (0x10-18) REGISTER MAP: 8/16 bit regs */
-typedef struct _ROBO_MII_CTRL_STRUC
-{
- unsigned char rsvd:8; /* reserved */
- unsigned char duplex:1; /* duplex mode */
- unsigned char restartAN:1;/* restart auto-negotiation */
- unsigned char rsvd1:1; /* reserved */
- unsigned char powerDown:1;/* power down */
- unsigned char ANenable:1; /* auto-negotiation enable */
- unsigned char speed:1; /* forced speed selection */
- unsigned char loopback:1; /* loopback */
- unsigned char reset:1; /* reset */
-} ROBO_MII_CTRL_STRUC;
-typedef struct _ROBO_MII_AN_ADVERT_STRUC
-{
- unsigned char selector:5; /* advertise selector field */
- unsigned char T10BaseT:1; /* advertise 10BaseT */
- unsigned char T10BaseTFull:1; /* advertise 10BaseT, full duplex */
- unsigned char T100BaseX:1; /* advertise 100BaseX */
- unsigned char T100BaseXFull:1;/* advertise 100BaseX full duplex */
- unsigned char noT4:1; /* do not advertise T4 */
- unsigned char pause:1; /* advertise pause for full duplex */
- unsigned char rsvd:2; /* reserved */
- unsigned char remoteFault:1; /* transmit remote fault */
- unsigned char rsvd1:1; /* reserved */
- unsigned char nextPage:1; /* nex page operation supported */
-} ROBO_MII_AN_ADVERT_STRUC;
-#define ROBO_MII_CTRL 0x00 /* Port MII Control */
-#define ROBO_MII_STAT 0x02 /* Port MII Status */
-/* Fields of link status register */
-#define ROBO_MII_STAT_JABBER (1<<1) /* Jabber detected */
-#define ROBO_MII_STAT_LINK (1<<2) /* Link status */
-
-#define ROBO_MII_PHYID_HI 0x04 /* Port PHY ID High */
-#define ROBO_MII_PHYID_LO 0x06 /* Port PHY ID Low */
-#define ROBO_MII_ANA_REG 0x08 /* MII Auto-Neg Advertisement */
-#define ROBO_MII_ANP_REG 0x0a /* MII Auto-Neg Partner Ability */
-#define ROBO_MII_AN_EXP_REG 0x0c /* MII Auto-Neg Expansion */
-#define ROBO_MII_AN_NP_REG 0x0e /* MII next page */
-#define ROBO_MII_ANP_NP_REG 0x10 /* MII Partner next page */
-#define ROBO_MII_100BX_AUX_CTRL 0x20 /* 100BASE-X Auxiliary Control */
-#define ROBO_MII_100BX_AUX_STAT 0x22 /* 100BASE-X Auxiliary Status */
-#define ROBO_MII_100BX_RCV_ERR_CTR 0x24 /* 100BASE-X Receive Error Ctr */
-#define ROBO_MII_100BX_RCV_FS_ERR 0x26 /* 100BASE-X Rcv False Sense Ctr */
-#define ROBO_MII_AUX_CTRL 0x30 /* Auxiliary Control/Status */
-/* Fields of Auxiliary control register */
-#define ROBO_MII_AUX_CTRL_FD (1<<0) /* Full duplex link detected*/
-#define ROBO_MII_AUX_CTRL_SP100 (1<<1) /* Speed 100 indication */
-#define ROBO_MII_AUX_STATUS 0x32 /* Aux Status Summary */
-#define ROBO_MII_CONN_STATUS 0x34 /* Aux Connection Status */
-#define ROBO_MII_AUX_MODE2 0x36 /* Aux Mode 2 */
-#define ROBO_MII_AUX_ERR_STATUS 0x38 /* Aux Error and General Status */
-#define ROBO_MII_AUX_MULTI_PHY 0x3c /* Aux Multiple PHY Register*/
-#define ROBO_MII_BROADCOM_TEST 0x3e /* Broadcom Test Register */
-
-
-/* BCM5325m PORT MIB REGISTERS (Pages 0x20-0x24,0x28) REGISTER MAP: 64/32 */
-/* Tranmit Statistics */
-#define ROBO_MIB_TX_OCTETS 0x00 /* 64b: TxOctets */
-#define ROBO_MIB_TX_DROP_PKTS 0x08 /* 32b: TxDropPkts */
-#define ROBO_MIB_TX_BC_PKTS 0x10 /* 32b: TxBroadcastPkts */
-#define ROBO_MIB_TX_MC_PKTS 0x14 /* 32b: TxMulticastPkts */
-#define ROBO_MIB_TX_UC_PKTS 0x18 /* 32b: TxUnicastPkts */
-#define ROBO_MIB_TX_COLLISIONS 0x1c /* 32b: TxCollisions */
-#define ROBO_MIB_TX_SINGLE_COLLISIONS 0x20 /* 32b: TxSingleCollision */
-#define ROBO_MIB_TX_MULTI_COLLISIONS 0x24 /* 32b: TxMultiCollision */
-#define ROBO_MIB_TX_DEFER_TX 0x28 /* 32b: TxDeferred Transmit */
-#define ROBO_MIB_TX_LATE_COLLISIONS 0x2c /* 32b: TxLateCollision */
-#define ROBO_MIB_EXCESS_COLLISIONS 0x30 /* 32b: TxExcessiveCollision*/
-#define ROBO_MIB_FRAME_IN_DISCARDS 0x34 /* 32b: TxFrameInDiscards */
-#define ROBO_MIB_TX_PAUSE_PKTS 0x38 /* 32b: TxPausePkts */
-
-/* Receive Statistics */
-#define ROBO_MIB_RX_OCTETS 0x44 /* 64b: RxOctets */
-#define ROBO_MIB_RX_UNDER_SIZE_PKTS 0x4c /* 32b: RxUndersizePkts(runts)*/
-#define ROBO_MIB_RX_PAUSE_PKTS 0x50 /* 32b: RxPausePkts */
-#define ROBO_MIB_RX_PKTS_64 0x54 /* 32b: RxPkts64Octets */
-#define ROBO_MIB_RX_PKTS_65_TO_127 0x58 /* 32b: RxPkts64to127Octets*/
-#define ROBO_MIB_RX_PKTS_128_TO_255 0x5c /* 32b: RxPkts128to255Octets*/
-#define ROBO_MIB_RX_PKTS_256_TO_511 0x60 /* 32b: RxPkts256to511Octets*/
-#define ROBO_MIB_RX_PKTS_512_TO_1023 0x64 /* 32b: RxPkts512to1023Octets*/
-#define ROBO_MIB_RX_PKTS_1024_TO_1522 0x68 /* 32b: RxPkts1024to1522Octets*/
-#define ROBO_MIB_RX_OVER_SIZE_PKTS 0x6c /* 32b: RxOversizePkts*/
-#define ROBO_MIB_RX_JABBERS 0x70 /* 32b: RxJabbers*/
-#define ROBO_MIB_RX_ALIGNMENT_ERRORS 0x74 /* 32b: RxAlignmentErrors*/
-#define ROBO_MIB_RX_FCS_ERRORS 0x78 /* 32b: RxFCSErrors */
-#define ROBO_MIB_RX_GOOD_OCTETS 0x7c /* 32b: RxGoodOctets */
-#define ROBO_MIB_RX_DROP_PKTS 0x84 /* 32b: RxDropPkts */
-#define ROBO_MIB_RX_UC_PKTS 0x88 /* 32b: RxUnicastPkts */
-#define ROBO_MIB_RX_MC_PKTS 0x8c /* 32b: RxMulticastPkts */
-#define ROBO_MIB_RX_BC_PKTS 0x90 /* 32b: RxBroadcastPkts */
-#define ROBO_MIB_RX_SA_CHANGES 0x94 /* 32b: RxSAChanges */
-#define ROBO_MIB_RX_FRAGMENTS 0x98 /* 32b: RxFragments */
-#define ROBO_MIB_RX_EXCESS_SZ_DISC 0x9c /* 32b: RxExcessSizeDisc*/
-#define ROBO_MIB_RX_SYMBOL_ERROR 0xa0 /* 32b: RxSymbolError */
-
-/* BCM5350 MIB Statistics */
-/* Group 0 */
-#define ROBO_MIB_TX_GOOD_PKTS 0x00 /* 16b: TxGoodPkts */
-#define ROBO_MIB_TX_UNICAST_PKTS 0x02 /* 16b: TxUnicastPkts */
-#define ROBO_MIB_RX_GOOD_PKTS 0x04 /* 16b: RxGoodPkts */
-#define ROBO_MIB_RX_GOOD_UNICAST_PKTS 0x06 /* 16b: RxGoodUnicastPkts */
-/* Group 1 */
-#define ROBO_MIB_TX_COLLISION 0x00 /* 16b: TxCollision */
-#define ROBO_MIB_TX_OCTETS_5350 0x02 /* 16b: TxOctets */
-#define ROBO_MIB_RX_FCS_ERRORS_5350 0x04 /* 16b: RxFCSErrors */
-#define ROBO_MIB_RX_GOOD_OCTETS_5350 0x06 /* 16b: RxGoodOctets */
-
-/* BCM5325m QoS REGISTERS (Page 0x30) REGISTER MAP: 8/16 */
-#define ROBO_QOS_CTRL 0x00 /* 16b: QoS Control Register */
-#define ROBO_QOS_LOCAL_WEIGHT_CTRL 0x10 /* 8b: Local HQ/LQ Weight Register*/
-#define ROBO_QOS_CPU_WEIGHT_CTRL 0x12 /* 8b: CPU HQ/LQ Weight Register*/
-#define ROBO_QOS_PAUSE_ENA 0x13 /* 16b: Qos Pause Enable Register*/
-#define ROBO_QOS_PRIO_THRESHOLD 0x15 /* 8b: Priority Threshold Register*/
-#define ROBO_QOS_RESERVED 0x16 /* 8b: Qos Reserved Register */
-
-/* BCM5325m VLAN REGISTERS (Page 0x34) REGISTER MAP: 8/16bit */
-typedef struct _ROBO_VLAN_CTRL0_STRUC
-{
- unsigned char frameControlP:2; /* 802.1P frame control */
- unsigned char frameControlQ:2; /* 802.1Q frame control */
- unsigned char dropMissedVID:1; /* enable drop missed VID packet */
- unsigned char vidMacHash:1; /* VID_MAC hash enable */
- unsigned char vidMacCheck:1; /* VID_MAC check enable */
- unsigned char VLANen:1; /* 802.1Q VLAN enable */
-} ROBO_VLAN_CTRL0_STRUC;
-#define VLAN_TABLE_WRITE 1 /* for read/write state in table access reg */
-#define VLAN_TABLE_READ 0 /* for read/write state in table access reg */
-#define VLAN_ID_HIGH_BITS 0 /* static high bits in table access reg */
-#define VLAN_ID_MAX 15 /* max VLAN id (5350) */
-#define VLAN_ID_MAX_5365 255 /* max VLAN id */
-#define VLAN_ID_MAX_5395 4094 /* max VLAN id (5395) */
-#define VLAN_ID_MASK VLAN_ID_MAX /* VLAN id mask */
-#ifdef BCM5380
-#define VLAN_UNTAG_SHIFT 13 /* for postioning untag bits in write reg */
-#define VLAN_VALID 0x4000000 /* valid bit in write reg */
-#else
-#define VLAN_UNTAG_SHIFT 7 /* for postioning untag bits in write reg */
-#define VLAN_VALID 0x4000 /* valid bit in write reg */
-/* corresponding values for 5350 */
-#define VLAN_UNTAG_SHIFT_5350 6 /* for postioning untag bits in write reg */
-#define VLAN_VALID_5350 0x00100000 /* valid bit in write reg */
-#endif
-typedef struct _ROBO_VLAN_TABLE_ACCESS_STRUC
-{
- unsigned char VLANid:8; /* VLAN ID (low 8 bits) */
- unsigned char VLANidHi:4; /* VLAN ID (fixed upper portion) */
- unsigned char readWriteState:1; /* read/write state (write = 1) */
- volatile unsigned char readWriteEnable:1; /* table read/write enable */
- unsigned char rsvd:2; /* reserved */
-} ROBO_VLAN_TABLE_ACCESS_STRUC;
-#ifdef BCM5380
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC
-{
- unsigned int VLANgroup:13;/* VLAN group mask */
- unsigned int VLANuntag:13;/* VLAN untag enable mask */
- unsigned char valid:1; /* valid */
- unsigned char rsvd:5; /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC;
-#else
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC
-{
- unsigned char VLANgroup:7; /* VLAN group mask */
- unsigned char VLANuntag:7; /* VLAN untag enable mask */
- unsigned char valid:1; /* valid */
- unsigned char rsvd:1; /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC;
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC_5350
-{
- unsigned char VLANgroup:6; /* VLAN group mask */
- unsigned char VLANuntag:6; /* VLAN untag enable mask */
- unsigned char highVID:8; /* upper bits of vid */
- unsigned char valid:1; /* valid */
- unsigned int rsvd:11; /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC_5350;
-#endif
-#define ROBO_VLAN_CTRL0 0x00 /* 8b: VLAN Control 0 Register */
-#define ROBO_VLAN_CTRL1 0x01 /* 8b: VLAN Control 1 Register */
-#define ROBO_VLAN_CTRL2 0x02 /* 8b: VLAN Control 2 Register */
-#define ROBO_VLAN_CTRL3 0x03 /* 8b: VLAN Control 3 Register */
-#define ROBO_VLAN_CTRL4 0x04 /* 8b: VLAN Control 4 Register */
-#define ROBO_VLAN_CTRL5 0x05 /* 8b: VLAN Control 5 Register */
-#define ROBO_VLAN_TABLE_ACCESS_5365 0x08 /* 14b: VLAN Table Access Register */
-#define ROBO_VLAN_TABLE_ACCESS 0x06 /* 14b: VLAN Table Access Register (5350) */
-#define ROBO_VLAN_WRITE_5365 0x0a /* 15b: VLAN Write Register */
-#define ROBO_VLAN_WRITE 0x08 /* 15b: VLAN Write Register (5350) */
-#define ROBO_VLAN_READ 0x0c /* 15b: VLAN Read Register */
-#define ROBO_VLAN_PORT0_DEF_TAG 0x10 /* 16b: VLAN Port 0 Default Tag Register */
-#define ROBO_VLAN_PORT1_DEF_TAG 0x12 /* 16b: VLAN Port 1 Default Tag Register */
-#define ROBO_VLAN_PORT2_DEF_TAG 0x14 /* 16b: VLAN Port 2 Default Tag Register */
-#define ROBO_VLAN_PORT3_DEF_TAG 0x16 /* 16b: VLAN Port 3 Default Tag Register */
-#define ROBO_VLAN_PORT4_DEF_TAG 0x18 /* 16b: VLAN Port 4 Default Tag Register */
-#define ROBO_VLAN_PORTMII_DEF_TAG 0x1a /* 16b: VLAN Port MII Default Tag Register */
-/* 5380 only */
-#define ROBO_VLAN_PORT5_DEF_TAG 0x1a /* 16b: VLAN Port 5 Default Tag Register */
-#define ROBO_VLAN_PORT6_DEF_TAG 0x1c /* 16b: VLAN Port 6 Default Tag Register */
-#define ROBO_VLAN_PORT7_DEF_TAG 0x1e /* 16b: VLAN Port 7 Default Tag Register */
-#define ROBO_VLAN_PORT8_DEF_TAG 0x20 /* 16b: VLAN Port 8 Default Tag Register */
-/* 53115 only */
-#define ROBO_DUPLEX_STAT_SUMMARY_53115 0x08 /* Duplex Status Summary: 16bit */
-#define ROBO_JUMBO_PAGE 0x40
-#define ROBO_JUMBO_CTRL 0x01 /* 32bit */
-#define ROBO_JUMBO_SIZE 0x05 /* 16bit */
-
-#ifndef _CFE_
-#pragma pack()
-#endif
-
-#endif /* !__BCM535M_H_ */
diff --git a/package/kernel/switch/src/gpio.h b/package/kernel/switch/src/gpio.h
deleted file mode 100644
index cb734f7..0000000
--- a/package/kernel/switch/src/gpio.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2006 OpenWrt.org
- *
- * This is free software, licensed under the GNU General Public License v2.
- * See /LICENSE for more information.
- */
-
-#ifndef __GPIO_H
-#define __GPIO_H
-
-#ifdef CONFIG_BCM47XX
-#include <linux/gpio.h>
-#else
-#warning "Unsupported configuration."
-
-#define bcm47xx_gpio_in(mask) (-1U)
-#define bcm47xx_gpio_out(mask, value) (-1U)
-#define bcm47xx_gpio_outen(mask, value) (-1U)
-#define bcm47xx_gpio_control(mask, value) (-1U)
-#define bcm47xx_gpio_intmask(mask, value) (-1U)
-#define bcm47xx_gpio_polarity(mask, value) (-1U)
-
-#endif
-
-#endif /* __GPIO_H */
diff --git a/package/kernel/switch/src/switch-adm.c b/package/kernel/switch/src/switch-adm.c
deleted file mode 100644
index 8c0ddc6..0000000
--- a/package/kernel/switch/src/switch-adm.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/*
- * ADMTEK Adm6996 switch configuration module
- *
- * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
- *
- * Partially based on Broadcom Home Networking Division 10/100 Mbit/s
- * Ethernet Device Driver (from Montavista 2.4.20_mvl31 Kernel).
- * Copyright (C) 2004 Broadcom Corporation
- *
- * adm_rreg function from adm6996
- * Copyright (C) 2004 Nikki Chumakov <nikki@gattaca.ru>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/sockios.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-
-#include "switch-core.h"
-#include "gpio.h"
-
-#ifdef CONFIG_BCM47XX
-#include <bcm47xx_nvram.h>
-#endif
-
-#define DRIVER_NAME "adm6996"
-#define DRIVER_VERSION "0.01"
-
-static int eecs = 0;
-static int eesk = 0;
-static int eedi = 0;
-static int eerc = 0;
-static int force = 0;
-
-MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
-MODULE_LICENSE("GPL");
-module_param(eecs, int, 0);
-module_param(eesk, int, 0);
-module_param(eedi, int, 0);
-module_param(eerc, int, 0);
-module_param(force, int, 0);
-
-/* Minimum timing constants */
-#define EECK_EDGE_TIME 3 /* 3us - max(adm 2.5us, 93c 1us) */
-#define EEDI_SETUP_TIME 1 /* 1us - max(adm 10ns, 93c 400ns) */
-#define EECS_SETUP_TIME 1 /* 1us - max(adm no, 93c 200ns) */
-
-/* Handy macros for writing fixed length values */
-#define adm_write8(cs, b) { __u8 val = (__u8) (b); adm_write(cs, &val, sizeof(val)*8); }
-#define adm_write16(cs, w) { __u16 val = hton16(w); adm_write(cs, (__u8 *)&val, sizeof(val)*8); }
-#define adm_write32(cs, i) { uint32 val = hton32(i); adm_write(cs, (__u8 *)&val, sizeof(val)*8); }
-
-#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-
-#ifdef CONFIG_BCM47XX
-
-/* Return gpio pin number assigned to the named pin */
-/*
-* Variable should be in format:
-*
-* gpio<N>=pin_name
-*
-* 'def_pin' is returned if there is no such variable found.
-*/
-static unsigned int get_gpiopin(char *pin_name, unsigned int def_pin)
-{
- char name[] = "gpioXXXX";
- char val[10];
- unsigned int pin;
-
- /* Go thru all possibilities till a match in pin name */
- for (pin = 0; pin < 16; pin ++) {
- sprintf(name, "gpio%d", pin);
- if (bcm47xx_nvram_getenv(name, val, sizeof(val)) >= 0) {
- if (!strcmp(val, pin_name))
- return pin;
- }
- }
- return def_pin;
-}
-#endif
-
-
-static void adm_write(int cs, char *buf, unsigned int bits)
-{
- int i, len = (bits + 7) / 8;
- __u8 mask;
-
- bcm47xx_gpio_out(eecs, (cs ? eecs : 0));
- udelay(EECK_EDGE_TIME);
-
- /* Byte assemble from MSB to LSB */
- for (i = 0; i < len; i++) {
- /* Bit bang from MSB to LSB */
- for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
- /* Clock low */
- bcm47xx_gpio_out(eesk, 0);
- udelay(EECK_EDGE_TIME);
-
- /* Output on rising edge */
- bcm47xx_gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
- udelay(EEDI_SETUP_TIME);
-
- /* Clock high */
- bcm47xx_gpio_out(eesk, eesk);
- udelay(EECK_EDGE_TIME);
- }
- }
-
- /* Clock low */
- bcm47xx_gpio_out(eesk, 0);
- udelay(EECK_EDGE_TIME);
-
- if (cs)
- bcm47xx_gpio_out(eecs, 0);
-}
-
-
-static void adm_read(int cs, char *buf, unsigned int bits)
-{
- int i, len = (bits + 7) / 8;
- __u8 mask;
-
- bcm47xx_gpio_out(eecs, (cs ? eecs : 0));
- udelay(EECK_EDGE_TIME);
-
- /* Byte assemble from MSB to LSB */
- for (i = 0; i < len; i++) {
- __u8 byte;
-
- /* Bit bang from MSB to LSB */
- for (mask = 0x80, byte = 0; mask && bits > 0; mask >>= 1, bits --) {
- __u8 gp;
-
- /* Clock low */
- bcm47xx_gpio_out(eesk, 0);
- udelay(EECK_EDGE_TIME);
-
- /* Input on rising edge */
- gp = bcm47xx_gpio_in(~0);
- if (gp & eedi)
- byte |= mask;
-
- /* Clock high */
- bcm47xx_gpio_out(eesk, eesk);
- udelay(EECK_EDGE_TIME);
- }
-
- *buf++ = byte;
- }
-
- /* Clock low */
- bcm47xx_gpio_out(eesk, 0);
- udelay(EECK_EDGE_TIME);
-
- if (cs)
- bcm47xx_gpio_out(eecs, 0);
-}
-
-
-/* Enable outputs with specified value to the chip */
-static void adm_enout(__u8 pins, __u8 val)
-{
- /* Prepare GPIO output value */
- bcm47xx_gpio_out(pins, val);
-
- /* Enable GPIO outputs */
- bcm47xx_gpio_outen(pins, pins);
- udelay(EECK_EDGE_TIME);
-}
-
-
-/* Disable outputs to the chip */
-static void adm_disout(__u8 pins)
-{
- /* Disable GPIO outputs */
- bcm47xx_gpio_outen(pins, 0);
- udelay(EECK_EDGE_TIME);
-}
-
-
-/* Advance clock(s) */
-static void adm_adclk(int clocks)
-{
- int i;
- for (i = 0; i < clocks; i++) {
- /* Clock high */
- bcm47xx_gpio_out(eesk, eesk);
- udelay(EECK_EDGE_TIME);
-
- /* Clock low */
- bcm47xx_gpio_out(eesk, 0);
- udelay(EECK_EDGE_TIME);
- }
-}
-
-static __u32 adm_rreg(__u8 table, __u8 addr)
-{
- /* cmd: 01 10 T DD R RRRRRR */
- __u8 bits[6] = {
- 0xFF, 0xFF, 0xFF, 0xFF,
- (0x06 << 4) | ((table & 0x01) << 3 | (addr&64)>>6),
- ((addr&63)<<2)
- };
-
- __u8 rbits[4];
-
- /* Enable GPIO outputs with all pins to 0 */
- adm_enout((__u8)(eecs | eesk | eedi), 0);
-
- adm_write(0, bits, 46);
- adm_disout((__u8)(eedi));
- adm_adclk(2);
- adm_read (0, rbits, 32);
-
- /* Extra clock(s) required per datasheet */
- adm_adclk(2);
-
- /* Disable GPIO outputs */
- adm_disout((__u8)(eecs | eesk));
-
- if (!table) /* EEPROM has 16-bit registers, but pumps out two registers in one request */
- return (addr & 0x01 ? (rbits[0]<<8) | rbits[1] : (rbits[2]<<8) | (rbits[3]));
- else
- return (rbits[0]<<24) | (rbits[1]<<16) | (rbits[2]<<8) | rbits[3];
-}
-
-
-
-/* Write chip configuration register */
-/* Follow 93c66 timing and chip's min EEPROM timing requirement */
-void
-adm_wreg(__u8 addr, __u16 val)
-{
- /* cmd(27bits): sb(1) + opc(01) + addr(bbbbbbbb) + data(bbbbbbbbbbbbbbbb) */
- __u8 bits[4] = {
- (0x05 << 5) | (addr >> 3),
- (addr << 5) | (__u8)(val >> 11),
- (__u8)(val >> 3),
- (__u8)(val << 5)
- };
-
- /* Enable GPIO outputs with all pins to 0 */
- adm_enout((__u8)(eecs | eesk | eedi), 0);
-
- /* Write cmd. Total 27 bits */
- adm_write(1, bits, 27);
-
- /* Extra clock(s) required per datasheet */
- adm_adclk(2);
-
- /* Disable GPIO outputs */
- adm_disout((__u8)(eecs | eesk | eedi));
-}
-
-
-/* Port configuration registers */
-static int port_conf[] = { 0x01, 0x03, 0x05, 0x07, 0x08, 0x09 };
-
-/* Bits in VLAN port mapping */
-static int vlan_ports[] = { 1 << 0, 1 << 2, 1 << 4, 1 << 6, 1 << 7, 1 << 8 };
-
-static int handle_vlan_port_read(void *driver, char *buf, int nr)
-{
- int ports, i, c, len = 0;
-
- if ((nr < 0) || (nr > 15))
- return 0;
-
- /* Get VLAN port map */
- ports = adm_rreg(0, 0x13 + nr);
-
- for (i = 0; i <= 5; i++) {
- if (ports & vlan_ports[i]) {
- c = adm_rreg(0, port_conf[i]);
-
- len += sprintf(buf + len, "%d", i);
- if (c & (1 << 4)) {
- buf[len++] = 't';
- if (((c & (0xf << 10)) >> 10) == nr)
- buf[len++] = '*';
- } else if (i == 5)
- buf[len++] = 'u';
-
- buf[len++] = '\t';
- }
- }
- len += sprintf(buf + len, "\n");
-
- return len;
-}
-
-static int handle_vlan_port_write(void *driver, char *buf, int nr)
-{
- int i, cfg, ports;
- switch_driver *d = (switch_driver *) driver;
- switch_vlan_config *c = switch_parse_vlan(d, buf);
-
- if (c == NULL)
- return -1;
-
- ports = adm_rreg(0, 0x13 + nr);
- for (i = 0; i < d->ports; i++) {
- if (c->port & (1 << i)) {
- ports |= vlan_ports[i];
-
- cfg = adm_rreg(0, port_conf[i]);
-
- /* Tagging */
- if (c->untag & (1 << i))
- cfg &= ~(1 << 4);
- else
- cfg |= (1 << 4);
-
- if ((c->untag | c->pvid) & (1 << i)) {
- cfg = (cfg & ~(0xf << 10)) | (nr << 10);
- }
-
- adm_wreg(port_conf[i], (__u16) cfg);
- } else {
- ports &= ~(vlan_ports[i]);
- }
- }
- adm_wreg(0x13 + nr, (__u16) ports);
-
- kfree(c);
- return 0;
-}
-
-static int handle_port_enable_read(void *driver, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", ((adm_rreg(0, port_conf[nr]) & (1 << 5)) ? 0 : 1));
-}
-
-static int handle_port_enable_write(void *driver, char *buf, int nr)
-{
- int reg = adm_rreg(0, port_conf[nr]);
-
- if (buf[0] == '0')
- reg |= (1 << 5);
- else if (buf[0] == '1')
- reg &= ~(1 << 5);
- else return -1;
-
- adm_wreg(port_conf[nr], (__u16) reg);
- return 0;
-}
-
-static int handle_port_media_read(void *driver, char *buf, int nr)
-{
- int len;
- int media = 0;
- int reg = adm_rreg(0, port_conf[nr]);
-
- if (reg & (1 << 1))
- media |= SWITCH_MEDIA_AUTO;
- if (reg & (1 << 2))
- media |= SWITCH_MEDIA_100;
- if (reg & (1 << 3))
- media |= SWITCH_MEDIA_FD;
-
- len = switch_print_media(buf, media);
- return len + sprintf(buf + len, "\n");
-}
-
-static int handle_port_media_write(void *driver, char *buf, int nr)
-{
- int media = switch_parse_media(buf);
- int reg = adm_rreg(0, port_conf[nr]);
-
- if (media < 0 || media & SWITCH_MEDIA_1000)
- return -1;
-
- reg &= ~((1 << 1) | (1 << 2) | (1 << 3));
- if (media & SWITCH_MEDIA_AUTO)
- reg |= 1 << 1;
- if (media & SWITCH_MEDIA_100)
- reg |= 1 << 2;
- if (media & SWITCH_MEDIA_FD)
- reg |= 1 << 3;
-
- adm_wreg(port_conf[nr], reg);
-
- return 0;
-}
-
-static int handle_vlan_enable_read(void *driver, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", ((adm_rreg(0, 0x11) & (1 << 5)) ? 1 : 0));
-}
-
-static int handle_vlan_enable_write(void *driver, char *buf, int nr)
-{
- int reg = adm_rreg(0, 0x11);
-
- if (buf[0] == '1')
- reg |= (1 << 5);
- else if (buf[0] == '0')
- reg &= ~(1 << 5);
- else return -1;
-
- adm_wreg(0x11, (__u16) reg);
- return 0;
-}
-
-static int handle_reset(void *driver, char *buf, int nr)
-{
- int i;
- u32 cfg;
-
- /*
- * Reset sequence: RC high->low(100ms)->high(30ms)
- *
- * WAR: Certain boards don't have the correct power on
- * reset logic therefore we must explicitly perform the
- * sequence in software.
- */
- if (eerc) {
- /* Keep RC high for at least 20ms */
- adm_enout(eerc, eerc);
- for (i = 0; i < 20; i ++)
- udelay(1000);
- /* Keep RC low for at least 100ms */
- adm_enout(eerc, 0);
- for (i = 0; i < 100; i++)
- udelay(1000);
- /* Set default configuration */
- adm_enout((__u8)(eesk | eedi), eesk);
- /* Keep RC high for at least 30ms */
- adm_enout(eerc, eerc);
- for (i = 0; i < 30; i++)
- udelay(1000);
- /* Leave RC high and disable GPIO outputs */
- adm_disout((__u8)(eecs | eesk | eedi));
-
- }
-
- /* set up initial configuration for cpu port */
- cfg = (0x8000 | /* Auto MDIX */
- (0xf << 10) | /* PVID */
- (1 << 4) | /* Tagging */
- 0xf); /* full duplex, 100Mbps, auto neg, flow ctrl */
- adm_wreg(port_conf[5], cfg);
-
- /* vlan mode select register (0x11): vlan on, mac clone */
- adm_wreg(0x11, 0xff30);
-
- return 0;
-}
-
-static int handle_registers(void *driver, char *buf, int nr)
-{
- int i, len = 0;
-
- for (i = 0; i <= 0x33; i++) {
- len += sprintf(buf + len, "0x%02x: 0x%04x\n", i, adm_rreg(0, i));
- }
-
- return len;
-}
-
-static int handle_counters(void *driver, char *buf, int nr)
-{
- int i, len = 0;
-
- for (i = 0; i <= 0x3c; i++) {
- len += sprintf(buf + len, "0x%02x: 0x%08x\n", i, adm_rreg(1, i));
- }
-
- return len;
-}
-
-static int detect_adm(void)
-{
- int ret = 0;
-
-#ifdef CONFIG_BCM47XX
- char buf[20];
- int boardflags = 0;
- int boardnum = 0;
-
- if (bcm47xx_nvram_getenv("boardflags", buf, sizeof(buf)) >= 0)
- boardflags = simple_strtoul(buf, NULL, 0);
-
- if (bcm47xx_nvram_getenv("boardnum", buf, sizeof(buf)) >= 0)
- boardnum = simple_strtoul(buf, NULL, 0);
-
- if ((boardnum == 44) && (boardflags == 0x0388)) { /* Trendware TEW-411BRP+ */
- ret = 1;
-
- eecs = get_gpiopin("adm_eecs", 2);
- eesk = get_gpiopin("adm_eesk", 3);
- eedi = get_gpiopin("adm_eedi", 4);
- eerc = get_gpiopin("adm_rc", 5);
-
- } else if ((boardflags & 0x80) || force) {
- ret = 1;
-
- eecs = get_gpiopin("adm_eecs", 2);
- eesk = get_gpiopin("adm_eesk", 3);
- eedi = get_gpiopin("adm_eedi", 4);
- eerc = get_gpiopin("adm_rc", 0);
-
- } else if (bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) {
- if (strcmp(buf, "bcm94710dev") == 0) {
- if (bcm47xx_nvram_getenv("boardnum", buf, sizeof(buf)) >= 0) {
- if (strncmp(buf, "42", 2) == 0) {
- /* WRT54G v1.1 hack */
- eecs = 2;
- eesk = 3;
- eedi = 5;
-
- ret = 1;
- }
- }
- }
- }
-
- if (eecs)
- eecs = (1 << eecs);
- if (eesk)
- eesk = (1 << eesk);
- if (eedi)
- eedi = (1 << eedi);
- if (eerc)
- eerc = (1 << eerc);
-#else
- ret = 1;
-#endif
-
- return ret;
-}
-
-static int __init adm_init(void)
-{
- switch_config cfg[] = {
- {"registers", handle_registers, NULL},
- {"counters", handle_counters, NULL},
- {"reset", NULL, handle_reset},
- {"enable_vlan", handle_vlan_enable_read, handle_vlan_enable_write},
- {NULL, NULL, NULL}
- };
- switch_config port[] = {
- {"enable", handle_port_enable_read, handle_port_enable_write},
- {"media", handle_port_media_read, handle_port_media_write},
- {NULL, NULL, NULL}
- };
- switch_config vlan[] = {
- {"ports", handle_vlan_port_read, handle_vlan_port_write},
- {NULL, NULL, NULL}
- };
- switch_driver driver = {
- name: DRIVER_NAME,
- version: DRIVER_VERSION,
- interface: "eth0",
- ports: 6,
- cpuport: 5,
- vlans: 16,
- driver_handlers: cfg,
- port_handlers: port,
- vlan_handlers: vlan,
- };
- snprintf(driver.dev_name, SWITCH_NAME_BUFSZ, DRIVER_NAME);
-
- if (!detect_adm())
- return -ENODEV;
-
- return switch_register_driver(&driver);
-}
-
-static void __exit adm_exit(void)
-{
- switch_unregister_driver(DRIVER_NAME);
-}
-
-
-module_init(adm_init);
-module_exit(adm_exit);
diff --git a/package/kernel/switch/src/switch-core.c b/package/kernel/switch/src/switch-core.c
deleted file mode 100644
index fc8a6bf..0000000
--- a/package/kernel/switch/src/switch-core.c
+++ /dev/null
@@ -1,527 +0,0 @@
-/*
- * switch-core.c
- *
- * Copyright (C) 2005 Felix Fietkau <openwrt@nbd.name>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- *
- * Basic doc of driver's /proc interface:
- * /proc/switch/<interface>/
- * registers: read-only
- * counters: read-only
- * reset: write causes hardware reset
- * enable_vlan: "0", "1"
- * port/<port-number>/
- * enabled: "0", "1"
- * media: "AUTO", "1000FD", "1000HD", "100FD", "100HD", "10FD", "10HD"
- * vlan/<port-number>/
- * ports: same syntax as for nvram's vlan*ports (eg. "1 2 3 4 5*")
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/proc_fs.h>
-#include <linux/list.h>
-
-#include "switch-core.h"
-
-static int drv_num = 0;
-static struct proc_dir_entry *switch_root;
-switch_driver drivers;
-
-typedef struct {
- struct list_head list;
- struct proc_dir_entry *parent;
- int nr;
- void *driver;
- switch_config handler;
-} switch_proc_handler;
-
-typedef struct {
- struct proc_dir_entry *driver_dir, *port_dir, *vlan_dir;
- struct proc_dir_entry **ports, **vlans;
- switch_proc_handler data;
- int nr;
-} switch_priv;
-
-static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos);
-static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data);
-
-static struct file_operations switch_proc_fops = {
- .read = (ssize_t (*) (struct file *, char __user *, size_t, loff_t *))switch_proc_read,
- .write = (ssize_t (*) (struct file *, const char __user *, size_t, loff_t *))switch_proc_write
-};
-
-static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
-{
- struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
- char *page;
- int len = 0;
-
- if ((page = kmalloc(SWITCH_MAX_BUFSZ, GFP_KERNEL)) == NULL)
- return -ENOBUFS;
-
- if (dent->data != NULL) {
- switch_proc_handler *handler = (switch_proc_handler *) dent->data;
- if (handler->handler.read != NULL)
- len += handler->handler.read(handler->driver, page + len, handler->nr);
- }
- len += 1;
-
- if (*ppos < len) {
- len = min_t(int, len - *ppos, count);
- if (copy_to_user(buf, (page + *ppos), len)) {
- kfree(page);
- return -EFAULT;
- }
- *ppos += len;
- } else {
- len = 0;
- }
-
- kfree(page);
- return len;
-}
-
-
-static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data)
-{
- struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
- char *page;
- int ret = -EINVAL;
-
- if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL)
- return -ENOBUFS;
-
- if (copy_from_user(page, buf, count)) {
- kfree(page);
- return -EINVAL;
- }
- page[count] = 0;
-
- if (dent->data != NULL) {
- switch_proc_handler *handler = (switch_proc_handler *) dent->data;
- if (handler->handler.write != NULL) {
- if ((ret = handler->handler.write(handler->driver, page, handler->nr)) >= 0)
- ret = count;
- }
- }
-
- kfree(page);
- return ret;
-}
-
-static int handle_driver_name(void *driver, char *buf, int nr)
-{
- const char *name = ((switch_driver *) driver)->name;
- return sprintf(buf, "%s\n", name);
-}
-
-static int handle_driver_version(void *driver, char *buf, int nr)
-{
- const char *version = ((switch_driver *) driver)->version;
- strcpy(buf, version);
- return sprintf(buf, "%s\n", version);
-}
-
-static int handle_driver_cpuport(void *driver, char *buf, int nr)
-{
- int cpuport = ((switch_driver *) driver)->cpuport;
- return sprintf(buf, "%i\n", cpuport);
-}
-
-static int handle_driver_ports(void *driver, char *buf, int nr)
-{
- int ports = ((switch_driver *) driver)->ports;
- return sprintf(buf, "%i\n", ports);
-}
-
-static int handle_driver_vlans(void *driver, char *buf, int nr)
-{
- int vlans = ((switch_driver *) driver)->vlans;
- return sprintf(buf, "%i\n", vlans);
-}
-
-static int handle_driver_dev_name(void *driver, char *buf, int nr)
-{
- char *dev_name = ((switch_driver *) driver)->dev_name;
- return sprintf(buf, "%s\n", dev_name);
-}
-
-static void add_handler(switch_driver *driver, const switch_config *handler, struct proc_dir_entry *parent, int nr)
-{
- switch_priv *priv = (switch_priv *) driver->data;
- struct proc_dir_entry *p;
- int mode;
-
- switch_proc_handler *tmp;
- tmp = (switch_proc_handler *) kmalloc(sizeof(switch_proc_handler), GFP_KERNEL);
- if (!tmp)
- return;
- INIT_LIST_HEAD(&tmp->list);
- tmp->parent = parent;
- tmp->nr = nr;
- tmp->driver = driver;
- memcpy(&tmp->handler, handler, sizeof(switch_config));
- list_add(&tmp->list, &priv->data.list);
-
- mode = 0;
- if (handler->read != NULL) mode |= S_IRUSR;
- if (handler->write != NULL) mode |= S_IWUSR;
-
- if ((p = create_proc_entry(handler->name, mode, parent)) != NULL) {
- p->data = (void *) tmp;
- p->proc_fops = &switch_proc_fops;
- }
-}
-
-static inline void add_handlers(switch_driver *driver, const switch_config *handlers, struct proc_dir_entry *parent, int nr)
-{
- int i;
-
- for (i = 0; handlers[i].name != NULL; i++) {
- add_handler(driver, &(handlers[i]), parent, nr);
- }
-}
-
-static void remove_handlers(switch_priv *priv)
-{
- struct list_head *pos, *q;
- switch_proc_handler *tmp;
-
- list_for_each_safe(pos, q, &priv->data.list) {
- tmp = list_entry(pos, switch_proc_handler, list);
- list_del(pos);
- remove_proc_entry(tmp->handler.name, tmp->parent);
- kfree(tmp);
- }
-}
-
-
-static void do_unregister(switch_driver *driver)
-{
- char buf[4];
- int i;
- switch_priv *priv = (switch_priv *) driver->data;
-
- remove_handlers(priv);
-
- for(i = 0; priv->ports[i] != NULL; i++) {
- sprintf(buf, "%d", i);
- remove_proc_entry(buf, priv->port_dir);
- }
- kfree(priv->ports);
- remove_proc_entry("port", priv->driver_dir);
-
- for(i = 0; priv->vlans[i] != NULL; i++) {
- sprintf(buf, "%d", i);
- remove_proc_entry(buf, priv->vlan_dir);
- }
- kfree(priv->vlans);
- remove_proc_entry("vlan", priv->driver_dir);
-
- remove_proc_entry(driver->interface, switch_root);
-
- if (priv->nr == (drv_num - 1))
- drv_num--;
-
- kfree(priv);
-}
-
-switch_config global_driver_handlers[] = {
- {"driver", handle_driver_name, NULL},
- {"version", handle_driver_version, NULL},
- {"cpuport", handle_driver_cpuport, NULL},
- {"ports", handle_driver_ports, NULL},
- {"vlans", handle_driver_vlans, NULL},
- {"dev_name", handle_driver_dev_name, NULL},
- {NULL, NULL, NULL}
-};
-
-static int do_register(switch_driver *driver)
-{
- switch_priv *priv;
- int i;
- char buf[4];
-
- priv = kmalloc(sizeof(switch_priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- driver->data = (void *) priv;
-
- priv->ports = kmalloc((driver->ports + 1) * sizeof(struct proc_dir_entry *),
- GFP_KERNEL);
- if (!priv->ports) {
- kfree(priv);
- return -ENOMEM;
- }
- priv->vlans = kmalloc((driver->vlans + 1) * sizeof(struct proc_dir_entry *),
- GFP_KERNEL);
- if (!priv->vlans) {
- kfree(priv->ports);
- kfree(priv);
- return -ENOMEM;
- }
-
- INIT_LIST_HEAD(&priv->data.list);
-
- priv->nr = drv_num++;
- priv->driver_dir = proc_mkdir(driver->interface, switch_root);
- if (driver->driver_handlers != NULL) {
- add_handlers(driver, driver->driver_handlers, priv->driver_dir, 0);
- add_handlers(driver, global_driver_handlers, priv->driver_dir, 0);
- }
-
- priv->port_dir = proc_mkdir("port", priv->driver_dir);
- for (i = 0; i < driver->ports; i++) {
- sprintf(buf, "%d", i);
- priv->ports[i] = proc_mkdir(buf, priv->port_dir);
- if (driver->port_handlers != NULL)
- add_handlers(driver, driver->port_handlers, priv->ports[i], i);
- }
- priv->ports[i] = NULL;
-
- priv->vlan_dir = proc_mkdir("vlan", priv->driver_dir);
- for (i = 0; i < driver->vlans; i++) {
- sprintf(buf, "%d", i);
- priv->vlans[i] = proc_mkdir(buf, priv->vlan_dir);
- if (driver->vlan_handlers != NULL)
- add_handlers(driver, driver->vlan_handlers, priv->vlans[i], i);
- }
- priv->vlans[i] = NULL;
-
-
- return 0;
-}
-
-static inline int isspace(char c) {
- switch(c) {
- case ' ':
- case 0x09:
- case 0x0a:
- case 0x0d:
- return 1;
- default:
- return 0;
- }
-}
-
-#define toupper(c) (islower(c) ? ((c) ^ 0x20) : (c))
-#define islower(c) (((unsigned char)((c) - 'a')) < 26)
-
-int switch_parse_media(char *buf)
-{
- char *str = buf;
- while (*buf != 0) {
- *buf = toupper(*buf);
- buf++;
- }
-
- if (strncmp(str, "AUTO", 4) == 0)
- return SWITCH_MEDIA_AUTO;
- else if (strncmp(str, "1000FD", 6) == 0)
- return SWITCH_MEDIA_1000 | SWITCH_MEDIA_FD;
- else if (strncmp(str, "1000HD", 6) == 0)
- return SWITCH_MEDIA_1000;
- else if (strncmp(str, "100FD", 5) == 0)
- return SWITCH_MEDIA_100 | SWITCH_MEDIA_FD;
- else if (strncmp(str, "100HD", 5) == 0)
- return SWITCH_MEDIA_100;
- else if (strncmp(str, "10FD", 4) == 0)
- return SWITCH_MEDIA_FD;
- else if (strncmp(str, "10HD", 4) == 0)
- return 0;
- else return -1;
-}
-
-int switch_print_media(char *buf, int media)
-{
- int len = 0;
-
- if (media & SWITCH_MEDIA_AUTO)
- len = sprintf(buf, "Auto");
- else if (media == (SWITCH_MEDIA_1000 | SWITCH_MEDIA_FD))
- len = sprintf(buf, "1000FD");
- else if (media == SWITCH_MEDIA_1000)
- len = sprintf(buf, "1000HD");
- else if (media == (SWITCH_MEDIA_100 | SWITCH_MEDIA_FD))
- len = sprintf(buf, "100FD");
- else if (media == SWITCH_MEDIA_100)
- len = sprintf(buf, "100HD");
- else if (media == SWITCH_MEDIA_FD)
- len = sprintf(buf, "10FD");
- else if (media == 0)
- len = sprintf(buf, "10HD");
- else
- len = sprintf(buf, "Invalid");
-
- return len;
-}
-
-switch_vlan_config *switch_parse_vlan(switch_driver *driver, char *buf)
-{
- switch_vlan_config *c;
- int j, u, p, s;
-
- c = kzalloc(sizeof(switch_vlan_config), GFP_KERNEL);
- if (!c)
- return NULL;
-
- while (isspace(*buf)) buf++;
- j = 0;
- while (*buf >= '0' && *buf <= '9') {
- j *= 10;
- j += *buf++ - '0';
-
- u = ((j == driver->cpuport) ? 0 : 1);
- p = 0;
- s = !(*buf >= '0' && *buf <= '9');
-
- if (s) {
- while (s && !isspace(*buf) && (*buf != 0)) {
- switch(*buf) {
- case 'u':
- u = 1;
- break;
- case 't':
- u = 0;
- break;
- case '*':
- p = 1;
- break;
- }
- buf++;
- }
- c->port |= (1 << j);
- if (u)
- c->untag |= (1 << j);
- if (p)
- c->pvid |= (1 << j);
-
- j = 0;
- }
-
- while (isspace(*buf)) buf++;
- }
- if (*buf != 0) {
- kfree(c);
- return NULL;
- }
-
- c->port &= (1 << driver->ports) - 1;
- c->untag &= (1 << driver->ports) - 1;
- c->pvid &= (1 << driver->ports) - 1;
-
- return c;
-}
-
-
-int switch_device_registered (char* device) {
- struct list_head *pos;
-
- list_for_each(pos, &drivers.list) {
- if (strcmp(list_entry(pos, switch_driver, list)->interface, device) == 0) {
- printk("There is already a switch registered on the device '%s'\n", device);
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-
-int switch_register_driver(switch_driver *driver)
-{
- struct list_head *pos;
- switch_driver *new;
- int ret;
-
- list_for_each(pos, &drivers.list) {
- if (strcmp(list_entry(pos, switch_driver, list)->name, driver->name) == 0) {
- printk("Switch driver '%s' already exists in the kernel\n", driver->name);
- return -EINVAL;
- }
- if (strcmp(list_entry(pos, switch_driver, list)->interface, driver->interface) == 0) {
- printk("There is already a switch registered on the device '%s'\n", driver->interface);
- return -EINVAL;
- }
- }
-
- new = kmalloc(sizeof(switch_driver), GFP_KERNEL);
- if (!new)
- return -ENOMEM;
- memcpy(new, driver, sizeof(switch_driver));
- new->name = strdup(driver->name);
- new->interface = strdup(driver->interface);
-
- if ((ret = do_register(new)) < 0) {
- kfree(new->name);
- kfree(new);
- return ret;
- }
- INIT_LIST_HEAD(&new->list);
- list_add(&new->list, &drivers.list);
-
- return 0;
-}
-
-void switch_unregister_driver(char *name) {
- struct list_head *pos, *q;
- switch_driver *tmp;
-
- list_for_each_safe(pos, q, &drivers.list) {
- tmp = list_entry(pos, switch_driver, list);
- if (strcmp(tmp->name, name) == 0) {
- do_unregister(tmp);
- list_del(pos);
- kfree(tmp->name);
- kfree(tmp);
-
- return;
- }
- }
-}
-
-static int __init switch_init(void)
-{
- if ((switch_root = proc_mkdir("switch", NULL)) == NULL) {
- printk("%s: proc_mkdir failed.\n", __FILE__);
- return -ENODEV;
- }
-
- INIT_LIST_HEAD(&drivers.list);
-
- return 0;
-}
-
-static void __exit switch_exit(void)
-{
- remove_proc_entry("switch", NULL);
-}
-
-MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(switch_device_registered);
-EXPORT_SYMBOL(switch_register_driver);
-EXPORT_SYMBOL(switch_unregister_driver);
-EXPORT_SYMBOL(switch_parse_vlan);
-EXPORT_SYMBOL(switch_parse_media);
-EXPORT_SYMBOL(switch_print_media);
-
-module_init(switch_init);
-module_exit(switch_exit);
diff --git a/package/kernel/switch/src/switch-core.h b/package/kernel/switch/src/switch-core.h
deleted file mode 100644
index cc520e4..0000000
--- a/package/kernel/switch/src/switch-core.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef __SWITCH_CORE_H
-#define __SWITCH_CORE_H
-
-#include <linux/version.h>
-#include <linux/list.h>
-#define SWITCH_MAX_BUFSZ 4096
-#define SWITCH_NAME_BUFSZ 16
-
-#define SWITCH_MEDIA_AUTO 1
-#define SWITCH_MEDIA_100 2
-#define SWITCH_MEDIA_FD 4
-#define SWITCH_MEDIA_1000 8
-
-typedef int (*switch_handler)(void *driver, char *buf, int nr);
-
-typedef struct {
- const char *name;
- switch_handler read, write;
-} switch_config;
-
-typedef struct {
- struct list_head list;
- const char *name;
- const char *version;
- const char *interface;
- int cpuport;
- int ports;
- int vlans;
- const switch_config *driver_handlers, *port_handlers, *vlan_handlers;
- void *data;
- void *priv;
- char dev_name[SWITCH_NAME_BUFSZ];
-} switch_driver;
-
-typedef struct {
- u32 port, untag, pvid;
-} switch_vlan_config;
-
-
-extern int switch_device_registered (char* device);
-extern int switch_register_driver(switch_driver *driver);
-extern void switch_unregister_driver(char *name);
-extern switch_vlan_config *switch_parse_vlan(switch_driver *driver, char *buf);
-extern int switch_parse_media(char *buf);
-extern int switch_print_media(char *buf, int media);
-
-static inline char *strdup(const char *str)
-{
- char *new = kmalloc(strlen(str) + 1, GFP_KERNEL);
- strcpy(new, str);
- return new;
-}
-
-
-#endif
diff --git a/package/kernel/switch/src/switch-robo.c b/package/kernel/switch/src/switch-robo.c
deleted file mode 100644
index f715972..0000000
--- a/package/kernel/switch/src/switch-robo.c
+++ /dev/null
@@ -1,892 +0,0 @@
-/*
- * Broadcom BCM5325E/536x switch configuration module
- *
- * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
- * Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
- * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
- * Based on 'robocfg' by Oleg I. Vdovikin
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/sockios.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <asm/uaccess.h>
-
-#include "switch-core.h"
-#include "etc53xx.h"
-
-#ifdef CONFIG_BCM47XX
-#include <bcm47xx_nvram.h>
-#endif
-
-#define DRIVER_NAME "bcm53xx"
-#define DRIVER_VERSION "0.03"
-#define PFX "roboswitch: "
-
-#define ROBO_PHY_ADDR 0x1E /* robo switch phy address */
-#define ROBO_PHY_ADDR_TG3 0x01 /* Tigon3 PHY address */
-#define ROBO_PHY_ADDR_BCM63XX 0x00 /* BCM63XX PHY address */
-
-/* MII registers */
-#define REG_MII_PAGE 0x10 /* MII Page register */
-#define REG_MII_ADDR 0x11 /* MII Address register */
-#define REG_MII_DATA0 0x18 /* MII Data register 0 */
-
-#define REG_MII_PAGE_ENABLE 1
-#define REG_MII_ADDR_WRITE 1
-#define REG_MII_ADDR_READ 2
-
-/* Robo device ID register (in ROBO_MGMT_PAGE) */
-#define ROBO_DEVICE_ID 0x30
-#define ROBO_DEVICE_ID_5325 0x25 /* Faked */
-#define ROBO_DEVICE_ID_5395 0x95
-#define ROBO_DEVICE_ID_5397 0x97
-#define ROBO_DEVICE_ID_5398 0x98
-#define ROBO_DEVICE_ID_53115 0x3115
-#define ROBO_DEVICE_ID_53125 0x3125
-
-/* Private et.o ioctls */
-#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
-#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
-
-/* Data structure for a Roboswitch device. */
-struct robo_switch {
- char *device; /* The device name string (ethX) */
- u16 devid; /* ROBO_DEVICE_ID_53xx */
- bool is_5365;
- bool gmii; /* gigabit mii */
- u8 corerev;
- int gpio_robo_reset;
- int gpio_lanports_enable;
- struct ifreq ifr;
- struct net_device *dev;
- unsigned char port[9];
-};
-
-/* Currently we can only have one device in the system. */
-static struct robo_switch robo;
-
-
-static int do_ioctl(int cmd)
-{
- mm_segment_t old_fs = get_fs();
- int ret;
-
- set_fs(KERNEL_DS);
- ret = robo.dev->netdev_ops->ndo_do_ioctl(robo.dev, &robo.ifr, cmd);
- set_fs(old_fs);
-
- return ret;
-}
-
-static u16 mdio_read(__u16 phy_id, __u8 reg)
-{
- struct mii_ioctl_data *mii = if_mii(&robo.ifr);
- int err;
-
- mii->phy_id = phy_id;
- mii->reg_num = reg;
-
- err = do_ioctl(SIOCGMIIREG);
- if (err < 0) {
- printk(KERN_ERR PFX "failed to read mdio reg %i with err %i.\n", reg, err);
-
- return 0xffff;
- }
-
- return mii->val_out;
-}
-
-static void mdio_write(__u16 phy_id, __u8 reg, __u16 val)
-{
- struct mii_ioctl_data *mii = if_mii(&robo.ifr);
- int err;
-
- mii->phy_id = phy_id;
- mii->reg_num = reg;
- mii->val_in = val;
-
- err = do_ioctl(SIOCSMIIREG);
- if (err < 0) {
- printk(KERN_ERR PFX "failed to write mdio reg: %i with err %i.\n", reg, err);
- return;
- }
-}
-
-static int robo_reg(__u8 page, __u8 reg, __u8 op)
-{
- int i = 3;
-
- /* set page number */
- mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE,
- (page << 8) | REG_MII_PAGE_ENABLE);
-
- /* set register address */
- mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR,
- (reg << 8) | op);
-
- /* check if operation completed */
- while (i--) {
- if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
- return 0;
- }
-
- printk(KERN_ERR PFX "timeout in robo_reg on page %i and reg %i with op %i.\n", page, reg, op);
-
- return 1;
-}
-
-/*
-static void robo_read(__u8 page, __u8 reg, __u16 *val, int count)
-{
- int i;
-
- robo_reg(page, reg, REG_MII_ADDR_READ);
-
- for (i = 0; i < count; i++)
- val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i);
-}
-*/
-
-static __u16 robo_read16(__u8 page, __u8 reg)
-{
- robo_reg(page, reg, REG_MII_ADDR_READ);
-
- return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0);
-}
-
-static __u32 robo_read32(__u8 page, __u8 reg)
-{
- robo_reg(page, reg, REG_MII_ADDR_READ);
-
- return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) |
- (mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
-}
-
-static void robo_write16(__u8 page, __u8 reg, __u16 val16)
-{
- /* write data */
- mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16);
-
- robo_reg(page, reg, REG_MII_ADDR_WRITE);
-}
-
-static void robo_write32(__u8 page, __u8 reg, __u32 val32)
-{
- /* write data */
- mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 0xFFFF);
- mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
-
- robo_reg(page, reg, REG_MII_ADDR_WRITE);
-}
-
-/* checks that attached switch is 5365 */
-static bool robo_bcm5365(void)
-{
- /* set vlan access id to 15 and read it back */
- __u16 val16 = 15;
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
-
- /* 5365 will refuse this as it does not have this reg */
- return robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS) != val16;
-}
-
-static bool robo_gmii(void)
-{
- if (mdio_read(0, ROBO_MII_STAT) & 0x0100)
- return ((mdio_read(0, 0x0f) & 0xf000) != 0);
- return false;
-}
-
-static int robo_switch_enable(void)
-{
- unsigned int i, last_port;
- u16 val;
-#ifdef CONFIG_BCM47XX
- char buf[20];
-#endif
-
- val = robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE);
- if (!(val & (1 << 1))) {
- /* Unmanaged mode */
- val &= ~(1 << 0);
- /* With forwarding */
- val |= (1 << 1);
- robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, val);
- val = robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE);
- if (!(val & (1 << 1))) {
- printk(KERN_ERR PFX "Failed to enable switch\n");
- return -EBUSY;
- }
-
- /* No spanning tree for unmanaged mode */
- last_port = (robo.devid == ROBO_DEVICE_ID_5398) ?
- ROBO_PORT7_CTRL : ROBO_PORT4_CTRL;
- for (i = ROBO_PORT0_CTRL; i <= last_port; i++)
- robo_write16(ROBO_CTRL_PAGE, i, 0);
-
- /* No spanning tree on IMP port too */
- robo_write16(ROBO_CTRL_PAGE, ROBO_IM_PORT_CTRL, 0);
- }
-
- if (robo.devid == ROBO_DEVICE_ID_53125) {
- /* Make IM port status link by default */
- val = robo_read16(ROBO_CTRL_PAGE, ROBO_PORT_OVERRIDE_CTRL) | 0xb1;
- robo_write16(ROBO_CTRL_PAGE, ROBO_PORT_OVERRIDE_CTRL, val);
- // TODO: init EEE feature
- }
-
-#ifdef CONFIG_BCM47XX
- /* WAN port LED, except for Netgear WGT634U */
- if (bcm47xx_nvram_getenv("nvram_type", buf, sizeof(buf)) >= 0) {
- if (strcmp(buf, "cfe") != 0)
- robo_write16(ROBO_CTRL_PAGE, 0x16, 0x1F);
- }
-#endif
- return 0;
-}
-
-static void robo_switch_reset(void)
-{
- if ((robo.devid == ROBO_DEVICE_ID_5395) ||
- (robo.devid == ROBO_DEVICE_ID_5397) ||
- (robo.devid == ROBO_DEVICE_ID_5398)) {
- /* Trigger a software reset. */
- robo_write16(ROBO_CTRL_PAGE, 0x79, 0x83);
- mdelay(500);
- robo_write16(ROBO_CTRL_PAGE, 0x79, 0);
- }
-}
-
-#ifdef CONFIG_BCM47XX
-static int get_gpio_pin(const char *name)
-{
- int i, err;
- char nvram_var[10];
- char buf[30];
-
- for (i = 0; i < 16; i++) {
- err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
- if (err <= 0)
- continue;
- err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
- if (err <= 0)
- continue;
- if (!strcmp(name, buf))
- return i;
- }
- return -1;
-}
-#endif
-
-static int robo_probe(char *devname)
-{
- __u32 phyid;
- unsigned int i;
- int err = -1;
- struct mii_ioctl_data *mii;
-
- printk(KERN_INFO PFX "Probing device '%s'\n", devname);
- strcpy(robo.ifr.ifr_name, devname);
-
- if ((robo.dev = dev_get_by_name(&init_net, devname)) == NULL) {
- printk(KERN_ERR PFX "No such device\n");
- err = -ENODEV;
- goto err_done;
- }
- if (!robo.dev->netdev_ops || !robo.dev->netdev_ops->ndo_do_ioctl) {
- printk(KERN_ERR PFX "ndo_do_ioctl not implemented in ethernet driver\n");
- err = -ENXIO;
- goto err_put;
- }
-
- robo.device = devname;
-
- /* try access using MII ioctls - get phy address */
- err = do_ioctl(SIOCGMIIPHY);
- if (err < 0) {
- printk(KERN_ERR PFX "error (%i) while accessing MII phy registers with ioctls\n", err);
- goto err_put;
- }
-
- /* got phy address check for robo address */
- mii = if_mii(&robo.ifr);
- if ((mii->phy_id != ROBO_PHY_ADDR) &&
- (mii->phy_id != ROBO_PHY_ADDR_BCM63XX) &&
- (mii->phy_id != ROBO_PHY_ADDR_TG3)) {
- printk(KERN_ERR PFX "Invalid phy address (%d)\n", mii->phy_id);
- err = -ENODEV;
- goto err_put;
- }
-
-#ifdef CONFIG_BCM47XX
- robo.gpio_lanports_enable = get_gpio_pin("lanports_enable");
- if (robo.gpio_lanports_enable >= 0) {
- err = gpio_request(robo.gpio_lanports_enable, "lanports_enable");
- if (err) {
- printk(KERN_ERR PFX "error (%i) requesting lanports_enable gpio (%i)\n",
- err, robo.gpio_lanports_enable);
- goto err_put;
- }
- gpio_direction_output(robo.gpio_lanports_enable, 1);
- mdelay(5);
- }
-
- robo.gpio_robo_reset = get_gpio_pin("robo_reset");
- if (robo.gpio_robo_reset >= 0) {
- err = gpio_request(robo.gpio_robo_reset, "robo_reset");
- if (err) {
- printk(KERN_ERR PFX "error (%i) requesting robo_reset gpio (%i)\n",
- err, robo.gpio_robo_reset);
- goto err_gpio_robo;
- }
- gpio_set_value(robo.gpio_robo_reset, 0);
- gpio_direction_output(robo.gpio_robo_reset, 1);
- gpio_set_value(robo.gpio_robo_reset, 0);
- mdelay(50);
-
- gpio_set_value(robo.gpio_robo_reset, 1);
- mdelay(20);
- } else {
- // TODO: reset the internal robo switch
- }
-#endif
-
- phyid = mdio_read(ROBO_PHY_ADDR, 0x2) |
- (mdio_read(ROBO_PHY_ADDR, 0x3) << 16);
-
- if (phyid == 0xffffffff || phyid == 0x55210022) {
- printk(KERN_ERR PFX "No Robo switch in managed mode found, phy_id = 0x%08x\n", phyid);
- err = -ENODEV;
- goto err_gpio_lanports;
- }
-
- /* Get the device ID */
- for (i = 0; i < 10; i++) {
- robo.devid = robo_read16(ROBO_MGMT_PAGE, ROBO_DEVICE_ID);
- if (robo.devid)
- break;
- udelay(10);
- }
- if (!robo.devid)
- robo.devid = ROBO_DEVICE_ID_5325; /* Fake it */
- if (robo.devid == ROBO_DEVICE_ID_5325)
- robo.is_5365 = robo_bcm5365();
- else
- robo.is_5365 = false;
-
- robo.gmii = robo_gmii();
- if (robo.devid == ROBO_DEVICE_ID_5325) {
- for (i = 0; i < 5; i++)
- robo.port[i] = i;
- } else {
- for (i = 0; i < 8; i++)
- robo.port[i] = i;
- }
- robo.port[i] = ROBO_IM_PORT_CTRL;
-
- robo_switch_reset();
- err = robo_switch_enable();
- if (err)
- goto err_gpio_lanports;
-
- printk(KERN_INFO PFX "found a 5%s%x!%s at %s\n", robo.devid & 0xff00 ? "" : "3", robo.devid,
- robo.is_5365 ? " It's a BCM5365." : "", devname);
-
- return 0;
-
-err_gpio_lanports:
- if (robo.gpio_lanports_enable >= 0)
- gpio_free(robo.gpio_lanports_enable);
-err_gpio_robo:
- if (robo.gpio_robo_reset >= 0)
- gpio_free(robo.gpio_robo_reset);
-err_put:
- dev_put(robo.dev);
- robo.dev = NULL;
-err_done:
- return err;
-}
-
-static int handle_vlan_port_read_old(switch_driver *d, char *buf, int nr)
-{
- __u16 val16;
- int len = 0;
- int j;
-
- val16 = (nr) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
-
- if (robo.is_5365) {
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5365, val16);
- /* actual read */
- val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
- if ((val16 & (1 << 14)) /* valid */) {
- for (j = 0; j < d->ports; j++) {
- if (val16 & (1 << j)) {
- len += sprintf(buf + len, "%d", j);
- if (val16 & (1 << (j + 7))) {
- if (j == d->cpuport)
- buf[len++] = 'u';
- } else {
- buf[len++] = 't';
- if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
- buf[len++] = '*';
- }
- buf[len++] = '\t';
- }
- }
- len += sprintf(buf + len, "\n");
- }
- } else {
- u32 val32;
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
- /* actual read */
- val32 = robo_read32(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
- if ((val32 & (1 << 20)) /* valid */) {
- for (j = 0; j < d->ports; j++) {
- if (val32 & (1 << j)) {
- len += sprintf(buf + len, "%d", j);
- if (val32 & (1 << (j + d->ports))) {
- if (j == d->cpuport)
- buf[len++] = 'u';
- } else {
- buf[len++] = 't';
- if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
- buf[len++] = '*';
- }
- buf[len++] = '\t';
- }
- }
- len += sprintf(buf + len, "\n");
- }
- }
-
- buf[len] = '\0';
-
- return len;
-}
-
-static int handle_vlan_port_read_new(switch_driver *d, char *buf, int nr)
-{
- __u8 vtbl_entry, vtbl_index, vtbl_access;
- __u32 val32;
- int len = 0;
- int j;
-
- if ((robo.devid == ROBO_DEVICE_ID_5395) ||
- (robo.devid == ROBO_DEVICE_ID_53115) ||
- (robo.devid == ROBO_DEVICE_ID_53125)) {
- vtbl_access = ROBO_VTBL_ACCESS_5395;
- vtbl_index = ROBO_VTBL_INDX_5395;
- vtbl_entry = ROBO_VTBL_ENTRY_5395;
- } else {
- vtbl_access = ROBO_VTBL_ACCESS;
- vtbl_index = ROBO_VTBL_INDX;
- vtbl_entry = ROBO_VTBL_ENTRY;
- }
-
- robo_write16(ROBO_ARLIO_PAGE, vtbl_index, nr);
- robo_write16(ROBO_ARLIO_PAGE, vtbl_access, (1 << 7) | (1 << 0));
- val32 = robo_read32(ROBO_ARLIO_PAGE, vtbl_entry);
- for (j = 0; j < d->ports; j++) {
- if (val32 & (1 << j)) {
- len += sprintf(buf + len, "%d", j);
- if (val32 & (1 << (j + d->ports))) {
- if (j == d->cpuport)
- buf[len++] = 'u';
- } else {
- buf[len++] = 't';
- if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
- buf[len++] = '*';
- }
- buf[len++] = '\t';
- }
- }
- len += sprintf(buf + len, "\n");
- buf[len] = '\0';
- return len;
-}
-
-static int handle_vlan_port_read(void *driver, char *buf, int nr)
-{
- switch_driver *d = (switch_driver *) driver;
-
- if (robo.devid != ROBO_DEVICE_ID_5325)
- return handle_vlan_port_read_new(d, buf, nr);
- else
- return handle_vlan_port_read_old(d, buf, nr);
-}
-
-static void handle_vlan_port_write_old(switch_driver *d, switch_vlan_config *c, int nr)
-{
- __u16 val16;
- __u32 val32;
- __u32 untag = ((c->untag & ~(1 << d->cpuport)) << d->ports);
-
- /* write config now */
- val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
- if (robo.is_5365) {
- robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5365,
- (1 << 14) /* valid */ | (untag << 1 ) | c->port);
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5365, val16);
- } else {
- if (robo.corerev < 3)
- val32 = (1 << 20) | ((nr >> 4) << 12) | untag | c->port;
- else
- val32 = (1 << 24) | (nr << 12) | untag | c->port;
- robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, val32);
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
- }
-}
-
-static void handle_vlan_port_write_new(switch_driver *d, switch_vlan_config *c, int nr)
-{
- __u8 vtbl_entry, vtbl_index, vtbl_access;
- __u32 untag = ((c->untag & ~(1 << d->cpuport)) << d->ports);
-
- /* write config now */
- if ((robo.devid == ROBO_DEVICE_ID_5395) ||
- (robo.devid == ROBO_DEVICE_ID_53115) ||
- (robo.devid == ROBO_DEVICE_ID_53125)) {
- vtbl_access = ROBO_VTBL_ACCESS_5395;
- vtbl_index = ROBO_VTBL_INDX_5395;
- vtbl_entry = ROBO_VTBL_ENTRY_5395;
- } else {
- vtbl_access = ROBO_VTBL_ACCESS;
- vtbl_index = ROBO_VTBL_INDX;
- vtbl_entry = ROBO_VTBL_ENTRY;
- }
-
- robo_write32(ROBO_ARLIO_PAGE, vtbl_entry, untag | c->port);
- robo_write16(ROBO_ARLIO_PAGE, vtbl_index, nr);
- robo_write16(ROBO_ARLIO_PAGE, vtbl_access, 1 << 7);
-}
-
-static int handle_vlan_port_write(void *driver, char *buf, int nr)
-{
- switch_driver *d = (switch_driver *)driver;
- switch_vlan_config *c = switch_parse_vlan(d, buf);
- int j;
-
- if (c == NULL)
- return -EINVAL;
-
- for (j = 0; j < d->ports; j++) {
- if ((c->untag | c->pvid) & (1 << j)) {
- /* change default vlan tag */
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), nr);
- }
- }
-
- if (robo.devid != ROBO_DEVICE_ID_5325)
- handle_vlan_port_write_new(d, c, nr);
- else
- handle_vlan_port_write_old(d, c, nr);
-
- kfree(c);
- return 0;
-}
-
-#define set_switch(state) \
- robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, (robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | (state ? 2 : 0));
-
-static int handle_enable_read(void *driver, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", (((robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2) == 2) ? 1 : 0));
-}
-
-static int handle_enable_write(void *driver, char *buf, int nr)
-{
- set_switch(buf[0] == '1');
-
- return 0;
-}
-
-static int handle_port_enable_read(void *driver, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", ((robo_read16(ROBO_CTRL_PAGE, robo.port[nr]) & 3) == 3 ? 0 : 1));
-}
-
-static int handle_port_enable_write(void *driver, char *buf, int nr)
-{
- u16 val16;
-
- if (buf[0] == '0')
- val16 = 3; /* disabled */
- else if (buf[0] == '1')
- val16 = 0; /* enabled */
- else
- return -EINVAL;
-
- robo_write16(ROBO_CTRL_PAGE, robo.port[nr],
- (robo_read16(ROBO_CTRL_PAGE, robo.port[nr]) & ~3) | val16);
-
- return 0;
-}
-
-static int handle_port_media_read(void *driver, char *buf, int nr)
-{
- u16 bmcr = mdio_read(robo.port[nr], MII_BMCR);
- int media, len;
-
- if (bmcr & BMCR_ANENABLE)
- media = SWITCH_MEDIA_AUTO;
- else {
- if (bmcr & BMCR_SPEED1000)
- media = SWITCH_MEDIA_1000;
- else if (bmcr & BMCR_SPEED100)
- media = SWITCH_MEDIA_100;
- else
- media = 0;
-
- if (bmcr & BMCR_FULLDPLX)
- media |= SWITCH_MEDIA_FD;
- }
-
- len = switch_print_media(buf, media);
- return len + sprintf(buf + len, "\n");
-}
-
-static int handle_port_media_write(void *driver, char *buf, int nr)
-{
- int media = switch_parse_media(buf);
- u16 bmcr, bmcr_mask;
-
- if (media & SWITCH_MEDIA_AUTO)
- bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
- else {
- if (media & SWITCH_MEDIA_1000) {
- if (!robo.gmii)
- return -EINVAL;
- bmcr = BMCR_SPEED1000;
- }
- else if (media & SWITCH_MEDIA_100)
- bmcr = BMCR_SPEED100;
- else
- bmcr = 0;
-
- if (media & SWITCH_MEDIA_FD)
- bmcr |= BMCR_FULLDPLX;
- }
-
- bmcr_mask = ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_ANRESTART);
- mdio_write(robo.port[nr], MII_BMCR,
- (mdio_read(robo.port[nr], MII_BMCR) & bmcr_mask) | bmcr);
-
- return 0;
-}
-
-static int handle_enable_vlan_read(void *driver, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0));
-}
-
-static int handle_enable_vlan_write(void *driver, char *buf, int nr)
-{
- __u16 val16;
- int disable = ((buf[0] != '1') ? 1 : 0);
-
- val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0);
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
- val16 | (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
-
- val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1);
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
- val16 | (robo.devid == ROBO_DEVICE_ID_5325 ? (1 << 1) :
- 0) | (1 << 2) | (1 << 3)); /* RSV multicast */
-
- if (robo.devid != ROBO_DEVICE_ID_5325)
- return 0;
-
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
- (1 << 6) /* drop invalid VID frames */);
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
- (1 << 3) /* drop miss V table frames */);
-
- return 0;
-}
-
-static void handle_reset_old(switch_driver *d, char *buf, int nr)
-{
- int j;
- __u16 val16;
-
- /* reset vlans */
- for (j = 0; j <= ((robo.is_5365) ? VLAN_ID_MAX_5365 : VLAN_ID_MAX); j++) {
- /* write config now */
- val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
- if (robo.is_5365)
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5365, 0);
- else
- robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
- robo_write16(ROBO_VLAN_PAGE, robo.is_5365 ? ROBO_VLAN_TABLE_ACCESS_5365 :
- ROBO_VLAN_TABLE_ACCESS,
- val16);
- }
-}
-
-static void handle_reset_new(switch_driver *d, char *buf, int nr)
-{
- int j;
- __u8 vtbl_entry, vtbl_index, vtbl_access;
-
- if ((robo.devid == ROBO_DEVICE_ID_5395) ||
- (robo.devid == ROBO_DEVICE_ID_53115) ||
- (robo.devid == ROBO_DEVICE_ID_53125)) {
- vtbl_access = ROBO_VTBL_ACCESS_5395;
- vtbl_index = ROBO_VTBL_INDX_5395;
- vtbl_entry = ROBO_VTBL_ENTRY_5395;
- } else {
- vtbl_access = ROBO_VTBL_ACCESS;
- vtbl_index = ROBO_VTBL_INDX;
- vtbl_entry = ROBO_VTBL_ENTRY;
- }
-
- for (j = 0; j <= VLAN_ID_MAX; j++) {
- /* write config now */
- robo_write32(ROBO_ARLIO_PAGE, vtbl_entry, 0);
- robo_write16(ROBO_ARLIO_PAGE, vtbl_index, j);
- robo_write16(ROBO_ARLIO_PAGE, vtbl_access, 1 << 7);
- }
-}
-
-static int handle_reset(void *driver, char *buf, int nr)
-{
- int j;
- switch_driver *d = (switch_driver *) driver;
-
- /* disable switching */
- set_switch(0);
-
- if (robo.devid != ROBO_DEVICE_ID_5325)
- handle_reset_new(d, buf, nr);
- else
- handle_reset_old(d, buf, nr);
-
- /* reset ports to a known good state */
- for (j = 0; j < d->ports; j++) {
- robo_write16(ROBO_CTRL_PAGE, robo.port[j], 0x0000);
- robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), 0);
- }
-
- /* enable switching */
- set_switch(1);
-
- /* enable vlans */
- handle_enable_vlan_write(driver, "1", 0);
-
- return 0;
-}
-
-static int __init robo_init(void)
-{
- int notfound = 1;
- char *device;
-
- device = strdup("ethX");
- for (device[3] = '0'; (device[3] <= '3') && notfound; device[3]++) {
- if (! switch_device_registered (device))
- notfound = robo_probe(device);
- }
- device[3]--;
-
- if (notfound) {
- kfree(device);
- return -ENODEV;
- } else {
- static const switch_config cfg[] = {
- {
- .name = "enable",
- .read = handle_enable_read,
- .write = handle_enable_write
- }, {
- .name = "enable_vlan",
- .read = handle_enable_vlan_read,
- .write = handle_enable_vlan_write
- }, {
- .name = "reset",
- .read = NULL,
- .write = handle_reset
- }, { NULL, },
- };
- static const switch_config port[] = {
- {
- .name = "enable",
- .read = handle_port_enable_read,
- .write = handle_port_enable_write
- }, {
- .name = "media",
- .read = handle_port_media_read,
- .write = handle_port_media_write
- }, { NULL, },
- };
- static const switch_config vlan[] = {
- {
- .name = "ports",
- .read = handle_vlan_port_read,
- .write = handle_vlan_port_write
- }, { NULL, },
- };
- switch_driver driver = {
- .name = DRIVER_NAME,
- .version = DRIVER_VERSION,
- .interface = device,
- .cpuport = 5,
- .ports = 6,
- .vlans = 16,
- .driver_handlers = cfg,
- .port_handlers = port,
- .vlan_handlers = vlan,
- };
- if (robo.devid != ROBO_DEVICE_ID_5325) {
- driver.ports = 9;
- driver.cpuport = 8;
- }
- if (robo.is_5365)
- snprintf(driver.dev_name, SWITCH_NAME_BUFSZ, "BCM5365");
- else
- snprintf(driver.dev_name, SWITCH_NAME_BUFSZ, "BCM5%s%x", robo.devid & 0xff00 ? "" : "3", robo.devid);
-
- return switch_register_driver(&driver);
- }
-}
-
-static void __exit robo_exit(void)
-{
- switch_unregister_driver(DRIVER_NAME);
- if (robo.dev)
- dev_put(robo.dev);
- if (robo.gpio_robo_reset >= 0)
- gpio_free(robo.gpio_robo_reset);
- if (robo.gpio_lanports_enable >= 0)
- gpio_free(robo.gpio_lanports_enable);
- kfree(robo.device);
-}
-
-
-MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
-MODULE_LICENSE("GPL");
-
-module_init(robo_init);
-module_exit(robo_exit);
diff --git a/package/network/config/swconfig/Makefile b/package/network/config/swconfig/Makefile
index 65593b2..50d395c 100644
--- a/package/network/config/swconfig/Makefile
+++ b/package/network/config/swconfig/Makefile
@@ -18,7 +18,7 @@ include $(INCLUDE_DIR)/kernel.mk
define Package/swconfig
SECTION:=base
CATEGORY:=Base system
- DEPENDS:=@(!TARGET_brcm47xx||LINUX_3_10) +libuci +libnl-tiny
+ DEPENDS:=+libuci +libnl-tiny
TITLE:=Switch configuration utility
endef