diff options
Diffstat (limited to 'package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch')
-rw-r--r-- | package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch | 344 |
1 files changed, 344 insertions, 0 deletions
diff --git a/package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch b/package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch new file mode 100644 index 0000000..fd709bc --- /dev/null +++ b/package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch @@ -0,0 +1,344 @@ +--- /dev/null ++++ b/board/bt/bthomehubv5a/Makefile +@@ -0,0 +1,27 @@ ++# ++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).o ++ ++COBJS = $(BOARD).o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +--- /dev/null ++++ b/board/bt/bthomehubv5a/bthomehubv5a.c +@@ -0,0 +1,125 @@ ++/* ++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl@googlemail.com> ++ * Based on p2812hnufx.c: (C) 2013 Luka Perkov <luka@openwrt.org> ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include <common.h> ++#include <asm/gpio.h> ++#include <asm/lantiq/eth.h> ++#include <asm/lantiq/chipid.h> ++#include <asm/lantiq/cpu.h> ++#include <asm/arch/gphy.h> ++ ++#if defined(CONFIG_SPL_BUILD) ++#define do_gpio_init 1 ++#define do_pll_init 1 ++#define do_dcdc_init 0 ++#elif defined(CONFIG_SYS_BOOT_RAM) ++#define do_gpio_init 1 ++#define do_pll_init 0 ++#define do_dcdc_init 1 ++#else ++#define do_gpio_init 0 ++#define do_pll_init 0 ++#define do_dcdc_init 1 ++#endif ++ ++#define GPIO_POWER_GREEN 14 ++#define GPIO_POWER_RED 12 ++ ++static void gpio_init(void) ++{ ++ /* EBU.FL_CS1 as output for NAND CE */ ++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); ++ /* EBU.FL_A23 as output for NAND CLE */ ++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); ++ /* EBU.FL_A24 as output for NAND ALE */ ++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); ++ /* GPIO 3.0 as input for NAND Ready Busy */ ++ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN); ++ /* GPIO 3.1 as output for NAND Read */ ++ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); ++ ++ /* Turn on the green power LED */ ++ gpio_direction_output(GPIO_POWER_GREEN, 0); ++ ++ /* Turn off the red power LED */ ++ gpio_direction_output(GPIO_POWER_RED, 1); ++} ++ ++int board_early_init_f(void) ++{ ++ if (do_gpio_init) ++ gpio_init(); ++ ++ if (do_pll_init) ++ ltq_pll_init(); ++ ++ if (do_dcdc_init) ++ ltq_dcdc_init(0x7F); ++ ++ return 0; ++} ++ ++int checkboard(void) ++{ ++ puts("Board: " CONFIG_BOARD_NAME "\n"); ++ ltq_chip_print_info(); ++ ++ return 0; ++} ++ ++void show_boot_progress(int arg) ++{ ++ if (!do_gpio_init) ++ return 0; ++ ++ if (arg >= 0) { ++ /* Success - turn off the red power LED and turn on the green power LED */ ++ gpio_set_value(GPIO_POWER_RED, 1); ++ gpio_set_value(GPIO_POWER_GREEN, 0); ++ } else { ++ /* Failure - turn off green power LED and turn on red power LED */ ++ gpio_set_value(GPIO_POWER_GREEN, 1); ++ gpio_set_value(GPIO_POWER_RED, 0); ++ } ++ ++ return 0; ++} ++ ++static const struct ltq_eth_port_config eth_port_config[] = { ++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 3 */ ++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII }, ++ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 4 */ ++ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII }, ++ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */ ++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII }, ++ /* GMAC3: unused */ ++ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE }, ++ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 1 */ ++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII }, ++ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */ ++ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII }, ++}; ++ ++static const struct ltq_eth_board_config eth_board_config = { ++ .ports = eth_port_config, ++ .num_ports = ARRAY_SIZE(eth_port_config), ++}; ++ ++int board_eth_init(bd_t * bis) ++{ ++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0; ++ const ulong fw_addr = 0x80FE0000; ++ ++ ltq_gphy_phy11g_a2x_load(fw_addr); ++ ++ ltq_cgu_gphy_clk_src(clk); ++ ++ ltq_rcu_gphy_boot(0, fw_addr); ++ ltq_rcu_gphy_boot(1, fw_addr); ++ ++ return ltq_eth_initialize(ð_board_config); ++} +--- /dev/null ++++ b/board/bt/bthomehubv5a/config.mk +@@ -0,0 +1,7 @@ ++# ++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) +--- /dev/null ++++ b/board/bt/bthomehubv5a/ddr_settings.h +@@ -0,0 +1,70 @@ ++/* ++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl@googlemail.com> ++ * ++ * The values have been taken from the HH5A GPL source. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#define MC_CCR00_VALUE 0x101 ++#define MC_CCR01_VALUE 0x1000101 ++#define MC_CCR02_VALUE 0x1010000 ++#define MC_CCR03_VALUE 0x101 ++#define MC_CCR04_VALUE 0x1000000 ++#define MC_CCR05_VALUE 0x1000101 ++#define MC_CCR06_VALUE 0x1000100 ++#define MC_CCR07_VALUE 0x1010000 ++#define MC_CCR08_VALUE 0x1000101 ++#define MC_CCR09_VALUE 0x0 ++#define MC_CCR10_VALUE 0x2000100 ++#define MC_CCR11_VALUE 0x2000401 ++#define MC_CCR12_VALUE 0x30000 ++#define MC_CCR13_VALUE 0x202 ++#define MC_CCR14_VALUE 0x7080A0F ++#define MC_CCR15_VALUE 0x2040F ++#define MC_CCR16_VALUE 0x40000 ++#define MC_CCR17_VALUE 0x70102 ++#define MC_CCR18_VALUE 0x4020002 ++#define MC_CCR19_VALUE 0x30302 ++#define MC_CCR20_VALUE 0x8000700 ++#define MC_CCR21_VALUE 0x40F020A ++#define MC_CCR22_VALUE 0x0 ++#define MC_CCR23_VALUE 0xC020000 ++#define MC_CCR24_VALUE 0x4401B04 ++#define MC_CCR25_VALUE 0x0 ++#define MC_CCR26_VALUE 0x0 ++#define MC_CCR27_VALUE 0x6420000 ++#define MC_CCR28_VALUE 0x0 ++#define MC_CCR29_VALUE 0x0 ++#define MC_CCR30_VALUE 0x798 ++#define MC_CCR31_VALUE 0x0 ++#define MC_CCR32_VALUE 0x0 ++#define MC_CCR33_VALUE 0x650000 ++#define MC_CCR34_VALUE 0x200C8 ++#define MC_CCR35_VALUE 0x1D445D ++#define MC_CCR36_VALUE 0xC8 ++#define MC_CCR37_VALUE 0xC351 ++#define MC_CCR38_VALUE 0x0 ++#define MC_CCR39_VALUE 0x141F04 ++#define MC_CCR40_VALUE 0x142704 ++#define MC_CCR41_VALUE 0x141b42 ++#define MC_CCR42_VALUE 0x141b42 ++#define MC_CCR43_VALUE 0x566504 ++#define MC_CCR44_VALUE 0x566504 ++#define MC_CCR45_VALUE 0x565F17 ++#define MC_CCR46_VALUE 0x565F17 ++#define MC_CCR47_VALUE 0x0 ++#define MC_CCR48_VALUE 0x0 ++#define MC_CCR49_VALUE 0x0 ++#define MC_CCR50_VALUE 0x0 ++#define MC_CCR51_VALUE 0x0 ++#define MC_CCR52_VALUE 0x133 ++#define MC_CCR53_VALUE 0xF3014B27 ++#define MC_CCR54_VALUE 0xF3014B27 ++#define MC_CCR55_VALUE 0xF3014B27 ++#define MC_CCR56_VALUE 0xF3014B27 ++#define MC_CCR57_VALUE 0x7800301 ++#define MC_CCR58_VALUE 0x7800301 ++#define MC_CCR59_VALUE 0x7800301 ++#define MC_CCR60_VALUE 0x7800301 ++#define MC_CCR61_VALUE 0x4 +--- a/boards.cfg ++++ b/boards.cfg +@@ -546,6 +546,8 @@ Active mips mips32 vrx20 + Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck@gmail.com> + Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com> + Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com> ++Active mips mips32 vrx200 bt bthomehubv5a bthomehubv5a_nandspl bthomehubv5a:SYS_BOOT_NANDSPL Martin Blumenstingl <martin.blumenstingl@googlemail.com> ++Active mips mips32 vrx200 bt bthomehubv5a bthomehubv5a_ram bthomehubv5a:SYS_BOOT_RAM Martin Blumenstingl <martin.blumenstingl@googlemail.com> + Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com> + Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com> + Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com> +--- /dev/null ++++ b/include/configs/bthomehubv5a.h +@@ -0,0 +1,89 @@ ++/* ++ * Copyright (C) 2016 Mathias Kresin <openwrt@kresin.me> ++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl@googlemail.com> ++ * Based on p2812hnufx.h: (C) 2013 Luka Perkov <luka@openwrt.org> ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_MACH_TYPE "BTHOMEHUBV5A" ++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE ++#define CONFIG_BOARD_NAME "BT Home Hub 5A" ++ ++/* Configure SoC */ ++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ ++ ++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */ ++ ++#define CONFIG_LTQ_SUPPORT_NAND_FLASH /* Have a ML01G100BHI00 NAND flash */ ++#define CONFIG_SYS_NAND_USE_FLASH_BBT ++ ++#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */ ++#define CONFIG_SYS_NAND_PAGE_COUNT 64 ++#define CONFIG_SYS_NAND_PAGE_SIZE 2048 ++#define CONFIG_SYS_NAND_OOBSIZE 64 ++#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) ++#define CONFIG_SYS_NAND_5_ADDR_CYCLE ++ ++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */ ++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */ ++#define CONFIG_LTQ_SPL_MC_TUNE ++ ++#define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16 MB */ ++ ++/* MTD devices */ ++#define CONFIG_MTD_PARTITIONS ++#define CONFIG_MTD_DEVICE ++#define CONFIG_CMD_MTDPARTS ++#define MTDIDS_DEFAULT "nand0=nand-xway" ++#define MTDPARTS_DEFAULT "mtdparts=nand-xway:0x07e80000@0x100000(UBI)" ++ ++/* UBI */ ++#define CONFIG_RBTREE ++#define CONFIG_CMD_UBI ++#define CONFIG_CMD_UBIFS ++ ++/* Environment */ ++#if defined(CONFIG_SYS_BOOT_NANDSPL) ++#define CONFIG_SPL_TPL_OFFS 0x800 ++#define CONFIG_SPL_TPL_SIZE 0x5000 ++#define CONFIG_SPL_MC_TUNE_OFFS 0x5800 ++#define CONFIG_SPL_U_BOOT_OFFS 0x6000 ++#define CONFIG_SPL_U_BOOT_SIZE 0x3a000 ++ ++#define CONFIG_ENV_IS_IN_NAND ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_ENV_OFFSET (640 * 1024) ++#define CONFIG_ENV_SECT_SIZE (128 * 1024) ++#else ++#define CONFIG_ENV_IS_NOWHERE ++#endif ++ ++#define CONFIG_ENV_SIZE (128 * 1024) ++ ++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR ++ ++/* Console */ ++#define CONFIG_LTQ_ADVANCED_CONSOLE ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_CONSOLE_ASC 1 ++#define CONFIG_CONSOLE_DEV "ttyLTQ1" ++ ++/* Pull in default board configs for Lantiq XWAY VRX200 */ ++#include <asm/lantiq/config.h> ++#include <asm/arch/config.h> ++ ++/* Pull in default OpenWrt configs for Lantiq SoC */ ++#include "openwrt-lantiq-common.h" ++ ++#undef CONFIG_BOOTCOMMAND ++#define CONFIG_BOOTCOMMAND \ ++ "mtdparts default; ubi part UBI; ubi read ${loadaddr} kernel; bootm ${loadaddr}" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ CONFIG_ENV_LANTIQ_DEFAULTS ++ ++#endif /* __CONFIG_H */ |