diff options
Diffstat (limited to 'package/hostap')
| -rw-r--r-- | package/hostap/Makefile | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/package/hostap/Makefile b/package/hostap/Makefile new file mode 100644 index 0000000..82e7475 --- /dev/null +++ b/package/hostap/Makefile @@ -0,0 +1,139 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/kernel.mk + +PKG_NAME:=hostap-driver +PKG_VERSION:=0.4.9 +PKG_RELEASE:=1 + +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz +PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/ +PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378 +PKG_CAT:=zcat + +PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) +PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install + +include $(INCLUDE_DIR)/package.mk + +define Package/kmod-hostap/Default + SECTION:=kernel + CATEGORY:=Kernel drivers + DESCRIPTION:=\ + Host AP is a driver for 802.11b wireless cards based on Intersil \\\ + Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the \\\ + card to act as an IEEE 802.11 access point. + URL:=http://hostap.epitest.fi/ + ifeq ($(KERNEL),2.6) + VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE) + else + VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE) + endif +endef + +define Package/kmod-hostap + $(call Package/kmod-hostap/Default) + DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT + TITLE:=Host AP support for Prism2/2.5/3 + DESCRIPTION+=\\\ + \\\ + This package contains the base Host AP driver code that is shared by \\\ + different hardware models. You will also need to enable support for \\\ + PLX/PCI/CS version of the driver to actually use the driver. +endef + +define Package/kmod-hostap-pci + $(call Package/kmod-hostap/Default) + DEPENDS:=kmod-hostap + TITLE:=Host AP driver for PCI adaptors + DESCRIPTION+=\\\ + \\\ + This package contains the Host AP driver for Prism2.5 PCI adaptors. +endef + +define Package/kmod-hostap-plx + $(call Package/kmod-hostap/Default) + DEPENDS:=kmod-hostap + TITLE:=Host AP driver for PLX9052 based PCI adaptors + DESCRIPTION+=\\\ + \\\ + This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 \\\ + based PCI adaptors. +endef + +ifeq ($(KERNEL),2.4) + define Build/Compile + $(MAKE) -C $(LINUX_DIR)/ \ + ARCH="$(LINUX_KARCH)" \ + CROSS_COMPILE="$(TARGET_CROSS)" \ + SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \ + modules + endef + + define Package/kmod-hostap/install + install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION) + $(CP) \ + $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \ + $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \ + $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \ + $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) \ + $(1)/lib/modules/$(LINUX_VERSION)/ + endef + + define Package/kmod-hostap-pci/install + install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION) + $(CP) \ + $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) \ + $(1)/lib/modules/$(LINUX_VERSION)/ + endef + + define Package/kmod-hostap-plx/install + install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION) + $(CP) \ + $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) \ + $(1)/lib/modules/$(LINUX_VERSION)/ + endef +endif + +ifeq ($(KERNEL),2.6) + define Build/Compile + endef + +ifeq ($(CONFIG_HOSTAP),m) + define Package/kmod-hostap/install + install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION) + $(CP) \ + $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX) \ + $(1)/lib/modules/$(LINUX_VERSION)/ + endef +endif + +ifeq ($(CONFIG_HOSTAP_PCI),m) + define Package/kmod-hostap-pci/install + install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION) + $(CP) \ + $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX) \ + $(1)/lib/modules/$(LINUX_VERSION)/ + endef +endif + +ifeq ($(CONFIG_HOSTAP_PLX),m) + define Package/kmod-hostap-plx/install + install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION) + $(CP) \ + $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX) \ + $(1)/lib/modules/$(LINUX_VERSION)/ + endef +endif +endif + +$(eval $(call BuildPackage,kmod-hostap)) +$(eval $(call BuildPackage,kmod-hostap-pci)) +$(eval $(call BuildPackage,kmod-hostap-plx)) |