summaryrefslogtreecommitdiff
path: root/package
diff options
context:
space:
mode:
Diffstat (limited to 'package')
-rw-r--r--package/uboot-lantiq/Makefile4
-rw-r--r--package/uboot-lantiq/files/board/infineon/easy50712/danube.c51
-rw-r--r--package/uboot-lantiq/files/include/configs/ifx-common.h2
-rw-r--r--package/uboot-lantiq/patches/500-gigasx.patch35
4 files changed, 87 insertions, 5 deletions
diff --git a/package/uboot-lantiq/Makefile b/package/uboot-lantiq/Makefile
index f13395f..943132c 100644
--- a/package/uboot-lantiq/Makefile
+++ b/package/uboot-lantiq/Makefile
@@ -45,6 +45,9 @@ Package/uboot-lantiq-easy50812_DDR166M_ramboot=$(call Package/uboot-lantiq-templ
DDR_CONFIG_easy50712_DDR166M_ramboot:=easy50712_DDR166M
DDR_CONFIG_easy50812_DDR166M_ramboot:=easy50812
+#Siemens
+Package/uboot-lantiq-gigaSX76X_DDRsamsung166=$(call Package/uboot-lantiq-template,gigaSX76X_DDRsamsung166,NOR)
+
#Arcadyan
Package/uboot-lantiq-arv3527P_flash=$(call Package/uboot-lantiq-template,arv3527P_flash,NOR)
Package/uboot-lantiq-arv3527P_ramboot=$(call Package/uboot-lantiq-template,arv3527P_ramboot,RAM)
@@ -137,6 +140,7 @@ $(eval $(call BuildPackage,uboot-lantiq-easy50712_DDR166M))
$(eval $(call BuildPackage,uboot-lantiq-easy50712_DDR166M_ramboot))
$(eval $(call BuildPackage,uboot-lantiq-easy50812_DDR166M))
$(eval $(call BuildPackage,uboot-lantiq-easy50812_DDR166M_ramboot))
+$(eval $(call BuildPackage,uboot-lantiq-gigaSX76X_DDRsamsung166))
#$(eval $(call BuildPackage,uboot-lantiq-arv3527P_flash))
#$(eval $(call BuildPackage,uboot-lantiq-arv3527P_brnboot))
#$(eval $(call BuildPackage,uboot-lantiq-arv3527P_ramboot))
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/danube.c b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c
index 0b33a3a..51b7577 100644
--- a/package/uboot-lantiq/files/board/infineon/easy50712/danube.c
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c
@@ -180,6 +180,7 @@ int checkboard (void)
switch (part_num)
{
case 0x129:
+ case 0x12B:
case 0x12D:
puts("Danube/Twinpass/Vinax-VE ");
break;
@@ -233,6 +234,19 @@ static int external_switch_init(void)
unsigned short chipid0=0xdead, chipid1=0xbeef;
static char * const name = "lq_cpe_eth";
+#ifdef CONFIG_SWITCH_PORT0
+ *DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P0_OD |= (1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P0_DIR |= (1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P0_OUT |= (1<<CONFIG_SWITCH_PIN);
+#elif defined(CONFIG_SWITCH_PORT1)
+ *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P1_OD |= (1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P1_DIR |= (1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P1_OUT |= (1<<CONFIG_SWITCH_PIN);
+#endif
#ifdef CLK_OUT2_25MHZ
*DANUBE_GPIO_P0_DIR=0x0000ae78;
*DANUBE_GPIO_P0_ALTSEL0=0x00008078;
@@ -245,12 +259,12 @@ static int external_switch_init(void)
/* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */
udelay(100000);
- debug("\nsearching for Samurai switch ... ");
+ printf("\nsearching for Samurai switch ... ");
if ( (miiphy_read(name, PHYADDR(SAMURAI_ID_REG0), &chipid0)==0) &&
(miiphy_read(name, PHYADDR(SAMURAI_ID_REG1), &chipid1)==0) ) {
if (((chipid0 & 0xFFF0) == ID_SAMURAI_0) &&
((chipid1 & 0x000F) == ID_SAMURAI_1)) {
- debug("found");
+ printf("found");
/* enable "Crossover Auto Detect" + defaults */
/* P0 */
@@ -274,10 +288,11 @@ static int external_switch_init(void)
}
}
- debug("\nsearching for TANTOS switch ... ");
+ printf("%04X %04x\n", chipid0, chipid1);
+ printf("\nsearching for TANTOS switch ... ");
if (miiphy_read(name, PHYADDR(0x101), &chipid0) == 0) {
if (chipid0 == ID_TANTOS) {
- debug("found");
+ printf("found");
/* P5 Basic Control: Force Link Up */
miiphy_write(name, PHYADDR(0xA1), 0x0004);
@@ -315,8 +330,36 @@ static int external_switch_init(void)
}
#endif /* CONFIG_EXTRA_SWITCH */
+int board_gpio_init(void)
+{
+#ifdef CONFIG_BUTTON_PORT0
+ *DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
+ *DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
+ *DANUBE_GPIO_P0_DIR &= ~(1<<CONFIG_BUTTON_PIN);
+ if(!!(*DANUBE_GPIO_P0_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
+ {
+ printf("button is pressed\n");
+ setenv("bootdelay", "0");
+ setenv("bootcmd", "httpd");
+ }
+#elif defined(CONFIG_BUTTON_PORT1)
+ *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
+ *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
+ *DANUBE_GPIO_P1_DIR &= ~(1<<CONFIG_BUTTON_PIN);
+ if(!!(*DANUBE_GPIO_P1_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
+ {
+ printf("button is pressed\n");
+ setenv("bootdelay", "0");
+ setenv("bootcmd", "httpd");
+ }
+#endif
+}
+
int board_eth_init(bd_t *bis)
{
+
+ board_gpio_init();
+
#if defined(CONFIG_IFX_ETOP)
*DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
diff --git a/package/uboot-lantiq/files/include/configs/ifx-common.h b/package/uboot-lantiq/files/include/configs/ifx-common.h
index 8b194d0..4189031 100644
--- a/package/uboot-lantiq/files/include/configs/ifx-common.h
+++ b/package/uboot-lantiq/files/include/configs/ifx-common.h
@@ -186,7 +186,7 @@
#define CONFIG_BOOTSTRAP_BAUDRATE CONFIG_BAUDRATE
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOOTSTRAP_LZMA
-#define CONFIG_BOOTSTRAP_SERIAL
+//#define CONFIG_BOOTSTRAP_SERIAL
#endif
#endif /* __IFX_COMMON_H */
diff --git a/package/uboot-lantiq/patches/500-gigasx.patch b/package/uboot-lantiq/patches/500-gigasx.patch
new file mode 100644
index 0000000..fe384ef
--- /dev/null
+++ b/package/uboot-lantiq/patches/500-gigasx.patch
@@ -0,0 +1,35 @@
+--- a/Makefile
++++ b/Makefile
+@@ -3613,6 +3613,32 @@
+ $(eval $(call arcadyan, arv752DPW%config))
+ $(eval $(call arcadyan, arv752DPW22%config))
+
++gigaSX76X%config : unconfig
++ @mkdir -p $(obj)include
++ @mkdir -p $(obj)board/infineon/easy50712
++ @[ -z "$(findstring ramboot,$@)" ] || \
++ { echo "TEXT_BASE = 0xA0400000" >$(obj)board/infineon/easy50712/config.tmp ; \
++ echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \
++ $(XECHO) "... with ramboot configuration" ; \
++ }
++ @if [ "$(findstring _DDR,$@)" -a -z "$(findstring ramboot,$@)" ] ; then \
++ echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \
++ echo "#define CONFIG_BOOTSTRAP" >>$(obj)include/config.h ; \
++ DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \
++ case "$${DDR}" in \
++ 111M|166M|e111M|e166M|promos400|samsung166|psc166) \
++ $(XECHO) "... with DDR RAM config $${DDR}" ; \
++ echo "#define CONFIG_USE_DDR_RAM_CFG_$${DDR}" >>$(obj)include/config.h ;; \
++ *) $(XECHO) "... DDR RAM config \\\"$${DDR}\\\" unknown, use default"; \
++ esac; \
++ fi
++ echo "#define CONFIG_SWITCH_PORT1 1" >>$(obj)include/config.h
++ echo "#define CONFIG_SWITCH_PIN 3" >>$(obj)include/config.h
++ echo "#define CONFIG_BUTTON_PORT0 1" >>$(obj)include/config.h
++ echo "#define CONFIG_BUTTON_PIN 14" >>$(obj)include/config.h
++ echo "#define CONFIG_BUTTON_LEVEL 1" >>$(obj)include/config.h
++ @$(MKCONFIG) -a easy50712 mips mips easy50712 infineon danube
++
+ easy50712%config : unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/infineon/easy50712