diff options
Diffstat (limited to 'target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-1xx.c')
| -rw-r--r-- | target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-1xx.c | 149 |
1 files changed, 0 insertions, 149 deletions
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-1xx.c b/target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-1xx.c deleted file mode 100644 index 8961115..0000000 --- a/target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-1xx.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Mikrotik RouterBOARD 1xx series support - * - * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> - * - * NAND initialization code was based on a driver for Linux 2.6.19+ which - * was derived from the driver for Linux 2.4.xx published by Mikrotik for - * their RouterBoard 1xx and 5xx series boards. - * Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk> - * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include "rb-1xx.h" - -#define RB1XX_NAND_CHIP_DELAY 25 - -#define RB1XX_KEYS_POLL_INTERVAL 20 -#define RB1XX_KEYS_DEBOUNCE_INTERVAL (3 * RB1XX_KEYS_POLL_INTERVAL) - -static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = { - PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1), - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2) -}; - -static struct mtd_partition rb1xx_nor_parts[] = { - { - .name = "booter", - .offset = 0, - .size = 64*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition rb1xx_nand_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = 4 * 1024 * 1024, - } , { - .name = "rootfs", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - } -}; - -/* - * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader - * will not be able to find the kernel that we load. So set the oobinfo - * when creating the partitions - */ -static struct nand_ecclayout rb1xx_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -/*--------------------------------------------------------------------------*/ - -static int rb1xx_nand_fixup(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd->priv; - - if (mtd->writesize == 512) - chip->ecc.layout = &rb1xx_nand_ecclayout; - - return 0; -} - -struct platform_nand_data rb1xx_nand_data __initdata = { - .chip = { - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(rb1xx_nand_parts), - .partitions = rb1xx_nand_parts, - .chip_delay = RB1XX_NAND_CHIP_DELAY, - .chip_fixup = rb1xx_nand_fixup, - }, -}; - -struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = { - { - .desc = "reset_button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL, - .gpio = ADM5120_GPIO_PIN7, - } -}; - -static void __init rb1xx_mac_setup(void) -{ - if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) { - adm5120_setup_eth_macs(rb_hs.mac_base); - } else { - u8 mac[ETH_ALEN]; - - random_ether_addr(mac); - adm5120_setup_eth_macs(mac); - } -} - -void __init rb1xx_add_device_flash(void) -{ - /* setup data for flash0 device */ - adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts); - adm5120_flash0_data.parts = rb1xx_nor_parts; - adm5120_flash0_data.window_size = 128*1024; - - adm5120_add_device_flash(0); -} - -void __init rb1xx_add_device_nand(void) -{ - /* enable NAND flash interface */ - adm5120_nand_enable(); - - /* initialize NAND chip */ - adm5120_nand_set_spn(1); - adm5120_nand_set_wpn(0); - - adm5120_add_device_nand(&rb1xx_nand_data); -} - -void __init rb1xx_generic_setup(void) -{ - if (adm5120_package_bga()) - adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs), - rb1xx_pci_irqs); - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); - - adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rb1xx_gpio_buttons), - rb1xx_gpio_buttons); - - rb1xx_add_device_flash(); - rb1xx_mac_setup(); -} |