summaryrefslogtreecommitdiff
path: root/target/linux/adm5120/image/lzma-loader/src
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/adm5120/image/lzma-loader/src')
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c584
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h113
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/LzmaTypes.h45
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/Makefile99
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/README55
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/board.c185
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/config.h143
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/decompress.c353
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/head.S209
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/loader.lds29
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/lzma-data.lds8
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/printf.c350
-rw-r--r--target/linux/adm5120/image/lzma-loader/src/printf.h18
13 files changed, 0 insertions, 2191 deletions
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c
deleted file mode 100644
index cb83453..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- LzmaDecode.c
- LZMA Decoder (optimized for Speed version)
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this Code, expressly permits you to
- statically or dynamically link your Code (or bind by name) to the
- interfaces of this file without subjecting your linked Code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-#define RC_READ_BYTE (*Buffer++)
-
-#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
- { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-
-#ifdef _LZMA_IN_CB
-
-#define RC_TEST { if (Buffer == BufferLim) \
- { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
- BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
-
-#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-
-#else
-
-#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
-
-#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
-
-#endif
-
-#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-
-#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-
-#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
- { UpdateBit0(p); mi <<= 1; A0; } else \
- { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
-
-#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
-
-#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
- { int i = numLevels; res = 1; \
- do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
- res -= (1 << numLevels); }
-
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-
-
-#define kNumStates 12
-#define kNumLitStates 7
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
-{
- unsigned char prop0;
- if (size < LZMA_PROPERTIES_SIZE)
- return LZMA_RESULT_DATA_ERROR;
- prop0 = propsData[0];
- if (prop0 >= (9 * 5 * 5))
- return LZMA_RESULT_DATA_ERROR;
- {
- for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
- for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
- propsRes->lc = prop0;
- /*
- unsigned char remainder = (unsigned char)(prop0 / 9);
- propsRes->lc = prop0 % 9;
- propsRes->pb = remainder / 5;
- propsRes->lp = remainder % 5;
- */
- }
-
- #ifdef _LZMA_OUT_READ
- {
- int i;
- propsRes->DictionarySize = 0;
- for (i = 0; i < 4; i++)
- propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
- if (propsRes->DictionarySize == 0)
- propsRes->DictionarySize = 1;
- }
- #endif
- return LZMA_RESULT_OK;
-}
-
-#define kLzmaStreamWasFinishedId (-1)
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *InCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
-{
- CProb *p = vs->Probs;
- SizeT nowPos = 0;
- Byte previousByte = 0;
- UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
- UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
- int lc = vs->Properties.lc;
-
- #ifdef _LZMA_OUT_READ
-
- UInt32 Range = vs->Range;
- UInt32 Code = vs->Code;
- #ifdef _LZMA_IN_CB
- const Byte *Buffer = vs->Buffer;
- const Byte *BufferLim = vs->BufferLim;
- #else
- const Byte *Buffer = inStream;
- const Byte *BufferLim = inStream + inSize;
- #endif
- int state = vs->State;
- UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
- int len = vs->RemainLen;
- UInt32 globalPos = vs->GlobalPos;
- UInt32 distanceLimit = vs->DistanceLimit;
-
- Byte *dictionary = vs->Dictionary;
- UInt32 dictionarySize = vs->Properties.DictionarySize;
- UInt32 dictionaryPos = vs->DictionaryPos;
-
- Byte tempDictionary[4];
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
- if (len == kLzmaStreamWasFinishedId)
- return LZMA_RESULT_OK;
-
- if (dictionarySize == 0)
- {
- dictionary = tempDictionary;
- dictionarySize = 1;
- tempDictionary[0] = vs->TempDictionary[0];
- }
-
- if (len == kLzmaNeedInitId)
- {
- {
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- UInt32 i;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- rep0 = rep1 = rep2 = rep3 = 1;
- state = 0;
- globalPos = 0;
- distanceLimit = 0;
- dictionaryPos = 0;
- dictionary[dictionarySize - 1] = 0;
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
- }
- len = 0;
- }
- while(len != 0 && nowPos < outSize)
- {
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- len--;
- }
- if (dictionaryPos == 0)
- previousByte = dictionary[dictionarySize - 1];
- else
- previousByte = dictionary[dictionaryPos - 1];
-
- #else /* if !_LZMA_OUT_READ */
-
- int state = 0;
- UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
- int len = 0;
- const Byte *Buffer;
- const Byte *BufferLim;
- UInt32 Range;
- UInt32 Code;
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
-
- {
- UInt32 i;
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- }
-
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
-
- #endif /* _LZMA_OUT_READ */
-
- while(nowPos < outSize)
- {
- CProb *prob;
- UInt32 bound;
- int posState = (int)(
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & posStateMask);
-
- prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- int symbol = 1;
- UpdateBit0(prob)
- prob = p + Literal + (LZMA_LIT_SIZE *
- (((
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
- if (state >= kNumLitStates)
- {
- int matchByte;
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- matchByte = dictionary[pos];
- #else
- matchByte = outStream[nowPos - rep0];
- #endif
- do
- {
- int bit;
- CProb *probLit;
- matchByte <<= 1;
- bit = (matchByte & 0x100);
- probLit = prob + 0x100 + bit + symbol;
- RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
- }
- while (symbol < 0x100);
- }
- while (symbol < 0x100)
- {
- CProb *probLit = prob + symbol;
- RC_GET_BIT(probLit, symbol)
- }
- previousByte = (Byte)symbol;
-
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
-
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #endif
- if (state < 4) state = 0;
- else if (state < 10) state -= 3;
- else state -= 6;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRep + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- rep3 = rep2;
- rep2 = rep1;
- rep1 = rep0;
- state = state < kNumLitStates ? 0 : 3;
- prob = p + LenCoder;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG0 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos;
- #endif
- UpdateBit0(prob);
-
- #ifdef _LZMA_OUT_READ
- if (distanceLimit == 0)
- #else
- if (nowPos == 0)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- state = state < kNumLitStates ? 9 : 11;
- #ifdef _LZMA_OUT_READ
- pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
- #endif
-
- continue;
- }
- else
- {
- UpdateBit1(prob);
- }
- }
- else
- {
- UInt32 distance;
- UpdateBit1(prob);
- prob = p + IsRepG1 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep1;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG2 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep2;
- }
- else
- {
- UpdateBit1(prob);
- distance = rep3;
- rep3 = rep2;
- }
- rep2 = rep1;
- }
- rep1 = rep0;
- rep0 = distance;
- }
- state = state < kNumLitStates ? 8 : 11;
- prob = p + RepLenCoder;
- }
- {
- int numBits, offset;
- CProb *probLen = prob + LenChoice;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenLow + (posState << kLenNumLowBits);
- offset = 0;
- numBits = kLenNumLowBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenChoice2;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenMid + (posState << kLenNumMidBits);
- offset = kLenNumLowSymbols;
- numBits = kLenNumMidBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenHigh;
- offset = kLenNumLowSymbols + kLenNumMidSymbols;
- numBits = kLenNumHighBits;
- }
- }
- RangeDecoderBitTreeDecode(probLen, numBits, len);
- len += offset;
- }
-
- if (state < 4)
- {
- int posSlot;
- state += kNumLitStates;
- prob = p + PosSlot +
- ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
- kNumPosSlotBits);
- RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
- if (posSlot >= kStartPosModelIndex)
- {
- int numDirectBits = ((posSlot >> 1) - 1);
- rep0 = (2 | ((UInt32)posSlot & 1));
- if (posSlot < kEndPosModelIndex)
- {
- rep0 <<= numDirectBits;
- prob = p + SpecPos + rep0 - posSlot - 1;
- }
- else
- {
- numDirectBits -= kNumAlignBits;
- do
- {
- RC_NORMALIZE
- Range >>= 1;
- rep0 <<= 1;
- if (Code >= Range)
- {
- Code -= Range;
- rep0 |= 1;
- }
- }
- while (--numDirectBits != 0);
- prob = p + Align;
- rep0 <<= kNumAlignBits;
- numDirectBits = kNumAlignBits;
- }
- {
- int i = 1;
- int mi = 1;
- do
- {
- CProb *prob3 = prob + mi;
- RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
- i <<= 1;
- }
- while(--numDirectBits != 0);
- }
- }
- else
- rep0 = posSlot;
- if (++rep0 == (UInt32)(0))
- {
- /* it's for stream version */
- len = kLzmaStreamWasFinishedId;
- break;
- }
- }
-
- len += kMatchMinLen;
- #ifdef _LZMA_OUT_READ
- if (rep0 > distanceLimit)
- #else
- if (rep0 > nowPos)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- #ifdef _LZMA_OUT_READ
- if (dictionarySize - distanceLimit > (UInt32)len)
- distanceLimit += len;
- else
- distanceLimit = dictionarySize;
- #endif
-
- do
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- len--;
- outStream[nowPos++] = previousByte;
- }
- while(len != 0 && nowPos < outSize);
- }
- }
- RC_NORMALIZE;
-
- #ifdef _LZMA_OUT_READ
- vs->Range = Range;
- vs->Code = Code;
- vs->DictionaryPos = dictionaryPos;
- vs->GlobalPos = globalPos + (UInt32)nowPos;
- vs->DistanceLimit = distanceLimit;
- vs->Reps[0] = rep0;
- vs->Reps[1] = rep1;
- vs->Reps[2] = rep2;
- vs->Reps[3] = rep3;
- vs->State = state;
- vs->RemainLen = len;
- vs->TempDictionary[0] = tempDictionary[0];
- #endif
-
- #ifdef _LZMA_IN_CB
- vs->Buffer = Buffer;
- vs->BufferLim = BufferLim;
- #else
- *inSizeProcessed = (SizeT)(Buffer - inStream);
- #endif
- *outSizeProcessed = nowPos;
- return LZMA_RESULT_OK;
-}
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h
deleted file mode 100644
index 2870eeb..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- LzmaDecode.h
- LZMA Decoder interface
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-#include "LzmaTypes.h"
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb UInt16
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
- int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-#define LZMA_PROPERTIES_SIZE 5
-
-typedef struct _CLzmaProperties
-{
- int lc;
- int lp;
- int pb;
- #ifdef _LZMA_OUT_READ
- UInt32 DictionarySize;
- #endif
-}CLzmaProperties;
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
-
-#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
-
-#define kLzmaNeedInitId (-2)
-
-typedef struct _CLzmaDecoderState
-{
- CLzmaProperties Properties;
- CProb *Probs;
-
- #ifdef _LZMA_IN_CB
- const unsigned char *Buffer;
- const unsigned char *BufferLim;
- #endif
-
- #ifdef _LZMA_OUT_READ
- unsigned char *Dictionary;
- UInt32 Range;
- UInt32 Code;
- UInt32 DictionaryPos;
- UInt32 GlobalPos;
- UInt32 DistanceLimit;
- UInt32 Reps[4];
- int State;
- int RemainLen;
- unsigned char TempDictionary[4];
- #endif
-} CLzmaDecoderState;
-
-#ifdef _LZMA_OUT_READ
-#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
-#endif
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
-
-#endif
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaTypes.h b/target/linux/adm5120/image/lzma-loader/src/LzmaTypes.h
deleted file mode 100644
index 9c27290..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/LzmaTypes.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-LzmaTypes.h
-
-Types for LZMA Decoder
-
-This file written and distributed to public domain by Igor Pavlov.
-This file is part of LZMA SDK 4.40 (2006-05-01)
-*/
-
-#ifndef __LZMATYPES_H
-#define __LZMATYPES_H
-
-#ifndef _7ZIP_BYTE_DEFINED
-#define _7ZIP_BYTE_DEFINED
-typedef unsigned char Byte;
-#endif
-
-#ifndef _7ZIP_UINT16_DEFINED
-#define _7ZIP_UINT16_DEFINED
-typedef unsigned short UInt16;
-#endif
-
-#ifndef _7ZIP_UINT32_DEFINED
-#define _7ZIP_UINT32_DEFINED
-#ifdef _LZMA_UINT32_IS_ULONG
-typedef unsigned long UInt32;
-#else
-typedef unsigned int UInt32;
-#endif
-#endif
-
-/* #define _LZMA_NO_SYSTEM_SIZE_T */
-/* You can use it, if you don't want <stddef.h> */
-
-#ifndef _7ZIP_SIZET_DEFINED
-#define _7ZIP_SIZET_DEFINED
-#ifdef _LZMA_NO_SYSTEM_SIZE_T
-typedef UInt32 SizeT;
-#else
-#include <stddef.h>
-typedef size_t SizeT;
-#endif
-#endif
-
-#endif
diff --git a/target/linux/adm5120/image/lzma-loader/src/Makefile b/target/linux/adm5120/image/lzma-loader/src/Makefile
deleted file mode 100644
index f23d040..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/Makefile
+++ /dev/null
@@ -1,99 +0,0 @@
-#
-# Makefile for Broadcom BCM947XX boards
-#
-# Copyright 2001-2003, Broadcom Corporation
-# All Rights Reserved.
-#
-# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-#
-# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org>
-# Modified to support bzip'd kernels.
-# Of course, it would be better to integrate bunzip capability into CFE.
-#
-# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su>
-# Cleaned up, modified for lzma support, removed from kernel
-#
-# Copyright 2007 Gabor Juhos <juhosg at openwrt.org>
-# Modified to support user defined entry point address.
-# Added support for make targets with different names
-#
-
-LOADADDR := 0x80001000
-LZMA_TEXT_START := 0x80500000
-LZMA_STARTUP_ORG:= 0
-LOADER_DATA :=
-CONFIG_PASS_KARGS :=
-CONFIG_BOARD :=
-
-CC := $(CROSS_COMPILE)gcc
-LD := $(CROSS_COMPILE)ld
-OBJCOPY := $(CROSS_COMPILE)objcopy
-OBJDUMP := $(CROSS_COMPILE)objdump
-
-BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
-
-CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
- -ffunction-sections -pipe -mlong-calls -fno-common -ffreestanding \
- -fhonour-copts \
- -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
-CFLAGS += -DLOADADDR=$(LOADADDR) -D_LZMA_PROB32
-
-ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DLZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG)
-
-LDFLAGS = -static --gc-sections -no-warn-mismatch
-LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
-
-O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
-
-OBJECTS := head.o decompress.o board.o printf.o LzmaDecode.o
-
-ifneq ($(strip $(LOADER_DATA)),)
-OBJECTS += data.o
-CFLAGS += -DLZMA_WRAPPER=1
-else
-CFLAGS += -D_LZMA_IN_CB
-endif
-
-ifneq ($(strip $(CONFIG_PASS_KARGS)),)
-CFLAGS += -DCONFIG_PASS_KARGS
-endif
-
-BOARD_DEF := $(strip $(CONFIG_BOARD))
-BOARD_DEF := $(shell echo $(BOARD_DEF) | tr a-z A-Z | tr -d -)
-ifneq ($(BOARD_DEF),)
-CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF)
-endif
-
-all: loader.bin
-
-# Don't build dependencies, this may die if $(CC) isn't gcc
-dep:
-
-install:
-
-%.o : %.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-%.o : %.S
- $(CC) $(ASFLAGS) -c -o $@ $<
-
-data.o: $(LOADER_DATA)
- $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
-
-loader.bin: loader.elf
- $(OBJCOPY) $(BIN_FLAGS) $< $@
-
-loader.elf: $(OBJECTS)
- $(LD) $(LDFLAGS) -o $@ $(OBJECTS)
-
-mrproper: clean
-
-clean:
- rm -f *.elf *.bin *.o
-
-
-
diff --git a/target/linux/adm5120/image/lzma-loader/src/README b/target/linux/adm5120/image/lzma-loader/src/README
deleted file mode 100644
index 16649e9..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/README
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * LZMA compressed kernel decompressor for bcm947xx boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-The code is intended to decompress kernel, being compressed using lzma utility
-build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
-
-decompressor code expects that your .trx file consist of three partitions:
-
-1) decompressor itself (this is gziped code which pmon/cfe will extract and run
-on boot-up instead of real kernel)
-2) LZMA compressed kernel (both streamed and regular modes are supported now)
-3) Root filesystem
-
-Please be sure to apply the following patch for use this new trx layout (it will
-allow using both new and old trx files for root filesystem lookup code)
-
---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300
-+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300
-@@ -221,7 +221,9 @@
- /* Try looking at TRX header for rootfs offset */
- if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
- bcm947xx_parts[1].offset = off;
-- if (le32_to_cpu(trx->offsets[1]) > off)
-+ if (le32_to_cpu(trx->offsets[2]) > off)
-+ off = le32_to_cpu(trx->offsets[2]);
-+ else if (le32_to_cpu(trx->offsets[1]) > off)
- off = le32_to_cpu(trx->offsets[1]);
- continue;
- }
-
-
-Revision history:
- 0.02 Initial release
- 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
- output size to decoder (stream mode compressed input is not
- a requirement anymore)
- 0.04 Reordered functions using lds script
diff --git a/target/linux/adm5120/image/lzma-loader/src/board.c b/target/linux/adm5120/image/lzma-loader/src/board.c
deleted file mode 100644
index 5ebdbc3..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/board.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * ADM5120 specific board support for LZMA decompressor
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include "config.h"
-#include <stddef.h>
-
-#define READREG(r) *(volatile unsigned int *)(r)
-#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v
-
-/*
- * INTC definitions
- */
-#define INTC_BASE 0xB2200000
-
-/* INTC registers */
-#define INTC_REG_IRQ_DISABLE 0x0C
-
-/*
- * UART definitions
- */
-#define UART0_BASE 0xB2600000
-#define UART1_BASE 0xB2800000
-/* UART registers */
-#define UART_REG_DATA 0x00 /* Data register */
-#define UART_REG_ECR 0x04 /* Error Clear register */
-#define UART_REG_LCRH 0x08 /* Line Control High register */
-#define UART_REG_LCRM 0x0C /* Line Control Middle register */
-#define UART_REG_LCRL 0x10 /* Line Control Low register */
-#define UART_REG_CTRL 0x14 /* Control register */
-#define UART_REG_FLAG 0x18 /* Flag register */
-
-/* Control register bits */
-#define UART_CTRL_EN ( 1 << 0 ) /* UART enable */
-
-/* Line Control High register bits */
-#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */
-
-/* Flag register bits */
-#define UART_FLAG_CTS ( 1 << 0 )
-#define UART_FLAG_DSR ( 1 << 1 )
-#define UART_FLAG_DCD ( 1 << 2 )
-#define UART_FLAG_BUSY ( 1 << 3 )
-#define UART_FLAG_RXFE ( 1 << 4 ) /* RX FIFO empty */
-#define UART_FLAG_TXFF ( 1 << 5 ) /* TX FIFO full */
-#define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */
-#define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */
-
-/*
- * SWITCH definitions
- */
-#define SWITCH_BASE 0xB2000000
-
-#define SWITCH_REG_CPUP_CONF 0x0024
-#define SWITCH_REG_PORT_CONF0 0x0028
-
-#define SWITCH_REG_GPIO_CONF0 0x00B8
-#define SWITCH_REG_GPIO_CONF2 0x00BC
-
-#define SWITCH_REG_PORT0_LED 0x0100
-#define SWITCH_REG_PORT1_LED 0x0104
-#define SWITCH_REG_PORT2_LED 0x0108
-#define SWITCH_REG_PORT3_LED 0x010C
-#define SWITCH_REG_PORT4_LED 0x0110
-
-#define SWITCH_PORTS_HW 0x3F /* Hardware Ports */
-
-/* CPUP_CONF register bits */
-#define CPUP_CONF_DCPUP ( 1 << 0 ) /* Disable CPU port */
-
-/* PORT_CONF0 register bits */
-#define PORT_CONF0_DP_SHIFT 0 /* disable port shift*/
-
-
-/*
- * UART routines
- */
-
-#if defined(CONFIG_USE_UART0)
-# define UART_READ(r) READREG(UART0_BASE+(r))
-# define UART_WRITE(r,v) WRITEREG(UART0_BASE+(r),(v))
-#else
-# define UART_READ(r) READREG(UART1_BASE+(r))
-# define UART_WRITE(r,v) WRITEREG(UART1_BASE+(r),(v))
-#endif
-
-static void uart_init(void)
-{
-#if 0
- unsigned int t;
-
- /* disable uart */
- UART_WRITE(UART_REG_CTRL, 0);
-
- /* keep current baud rate */
- t = UART_READ(UART_REG_LCRM);
- UART_WRITE(UART_REG_LCRM, t);
- t = UART_READ(UART_REG_LCRL);
- UART_WRITE(UART_REG_LCRL, t);
-
- /* keep data, stop, and parity bits, but disable FIFO */
- t = UART_READ(UART_REG_LCRH);
- t &= ~(UART_LCRH_FEN);
- UART_WRITE(UART_REG_LCRH, t );
-
- /* clear error bits */
- UART_WRITE(UART_REG_ECR, 0xFF);
-
- /* enable uart, and disable interrupts */
- UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
-#endif
-}
-
-/*
- * INTC routines
- */
-
-#define INTC_READ(r) READREG(INTC_BASE+(r))
-#define INTC_WRITE(r,v) WRITEREG(INTC_BASE+(r),v)
-
-static void intc_init(void)
-{
- INTC_WRITE(INTC_REG_IRQ_DISABLE, 0xFFFFFFFF);
-}
-
-/*
- * SWITCH routines
- */
-
-#define SWITCH_READ(r) READREG(SWITCH_BASE+(r))
-#define SWITCH_WRITE(r,v) WRITEREG(SWITCH_BASE+(r),v)
-
-static void switch_init(void)
-{
- /* disable PHYS ports */
- SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
- (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
-
- /* disable CPU port */
- SWITCH_WRITE(SWITCH_REG_CPUP_CONF, CPUP_CONF_DCPUP);
-
- /* disable GPIO lines */
- SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
- SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
-
- /* disable LED lines */
- SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
- SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);
- SWITCH_WRITE(SWITCH_REG_PORT2_LED, 0);
- SWITCH_WRITE(SWITCH_REG_PORT3_LED, 0);
- SWITCH_WRITE(SWITCH_REG_PORT4_LED, 0);
-}
-
-void board_putc(int ch)
-{
- while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
-
- UART_WRITE(UART_REG_DATA, ch);
-
- while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
-}
-
-void board_init(void)
-{
- intc_init();
- switch_init();
- uart_init();
-}
diff --git a/target/linux/adm5120/image/lzma-loader/src/config.h b/target/linux/adm5120/image/lzma-loader/src/config.h
deleted file mode 100644
index e5511d1..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/config.h
+++ /dev/null
@@ -1,143 +0,0 @@
-#ifndef _CONFIG_H_
-#define _CONFIG_H_
-
-#define FLASH_2M (2<<20)
-#define FLASH_4M (4<<20)
-
-/*
- * Cellvision/SparkLAN boards
- */
-
-#if defined(CONFIG_BOARD_CAS630)
-# define CONFIG_BOARD_NAME "CAS-630"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_CAS670)
-# define CONFIG_BOARD_NAME "CAS-670"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_CAS700)
-# define CONFIG_BOARD_NAME "CAS-700"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_CAS790)
-# define CONFIG_BOARD_NAME "CAS-790"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_CAS771)
-# define CONFIG_BOARD_NAME "CAS-771"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_CAS861)
-# define CONFIG_BOARD_NAME "CAS-861"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_NFS101U)
-# define CONFIG_BOARD_NAME "NFS-101U"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_NFS202U)
-# define CONFIG_BOARD_NAME "NFS-202U"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-/*
- * Compex boards
- */
-#if defined(CONFIG_BOARD_WP54GWRT)
-# define CONFIG_BOARD_NAME "WP54G-WRT"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-/*
- * Edimax boards
- */
-#if defined(CONFIG_BOARD_BR6104K)
-# define CONFIG_BOARD_NAME "BR-6104K"
-# define CONFIG_FLASH_SIZE FLASH_2M
-#endif
-
-#if defined(CONFIG_BOARD_BR6104KP)
-# define CONFIG_BOARD_NAME "BR-6104KP"
-# define CONFIG_FLASH_SIZE FLASH_2M
-#endif
-
-#if defined(CONFIG_BOARD_BR6104WG)
-# define CONFIG_BOARD_NAME "BR-6104WG"
-# define CONFIG_FLASH_SIZE FLASH_2M
-#endif
-
-/*
- * Infineon boards
- */
-#if defined(CONFIG_BOARD_EASY5120PATA)
-# define CONFIG_BOARD_NAME "EASY 5120P-ATA"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_EASY5120RT)
-# define CONFIG_BOARD_NAME "EASY 5120-RT"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_EASY5120WVOIP)
-# define CONFIG_BOARD_NAME "EASY 5120-WVOIP"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_EASY83000)
-# define CONFIG_BOARD_NAME "EASY 83000"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-/*
- * Motorola boards
- */
-#if defined(CONFIG_BOARD_POWERLINEMUGW)
-# define CONFIG_BOARD_NAME "Powerline MU Gateway"
-# define CONFIG_USE_UART1 1
-#endif
-
-/*
- * OSBRiDGE boards
- */
-#if defined(CONFIG_BOARD_5GXI)
-# define CONFIG_BOARD_NAME "OSBRiDGE 5GXi"
-#endif
-
-/*
- * ZyXEL boards
- */
-#if defined(CONFIG_BOARD_P334WT)
-# define CONFIG_BOARD_NAME "P-334WT"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-#if defined(CONFIG_BOARD_P335)
-# define CONFIG_BOARD_NAME "P-335"
-# define CONFIG_FLASH_SIZE FLASH_4M
-#endif
-
-/*
- * Default values
- */
-#ifndef CONFIG_BOARD_NAME
-# define CONFIG_BOARD_NAME "ADM5120"
-#endif
-
-#ifndef CONFIG_FLASH_SIZE
-# define CONFIG_FLASH_SIZE FLASH_2M
-#endif
-
-#if !defined(CONFIG_USE_UART0) && !defined(CONFIG_USE_UART1)
-# define CONFIG_USE_UART0
-#endif
-
-#endif /* _CONFIG_H_ */
diff --git a/target/linux/adm5120/image/lzma-loader/src/decompress.c b/target/linux/adm5120/image/lzma-loader/src/decompress.c
deleted file mode 100644
index cd4b8fa..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/decompress.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- *
- * LZMA compressed kernel decompressor for ADM5120 boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * Please note, this was code based on the bunzip2 decompressor code
- * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left
- * is an idea and part of original vendor code
- *
- *
- * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com>
- * pass actual output size to decoder (stream mode
- * compressed input is not a requirement anymore)
- *
- * 24-Apr-2005 Oleg I. Vdovikin
- * reordered functions using lds script, removed forward decl
- *
- * 24-Mar-2007 Gabor Juhos
- * pass original values of the a0,a1,a2,a3 registers to the kernel
- *
- * 19-May-2007 Gabor Juhos
- * endiannes related cleanups
- * add support for decompressing an embedded kernel
- *
- */
-
-#include <stddef.h>
-
-#include "config.h"
-#include "printf.h"
-#include "LzmaDecode.h"
-
-#define ADM5120_FLASH_START 0x1fc00000 /* Flash start */
-#define ADM5120_FLASH_END 0x1fe00000 /* Flash end */
-
-#define KSEG0 0x80000000
-#define KSEG1 0xa0000000
-
-#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
-
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-
-#define cache_unroll(base,op) \
- __asm__ __volatile__( \
- ".set noreorder;\n" \
- ".set mips3;\n" \
- "cache %1, (%0);\n" \
- ".set mips0;\n" \
- ".set reorder\n" \
- : \
- : "r" (base), \
- "i" (op));
-
-#ifdef LZMA_DEBUG
-# define DBG(f, a...) printf(f, ## a)
-#else
-# define DBG(f, a...) do {} while (0)
-#endif
-
-static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
-{
- unsigned long start = KSEG0;
- unsigned long end = (start + size);
-
- while(start < end) {
- cache_unroll(start,Index_Invalidate_I);
- start += lsize;
- }
-}
-
-static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
-{
- unsigned long start = KSEG0;
- unsigned long end = (start + size);
-
- while(start < end) {
- cache_unroll(start,Index_Writeback_Inv_D);
- start += lsize;
- }
-}
-
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-#define TRX_ALIGN 0x1000
-
-struct trx_header {
- unsigned int magic; /* "HDR0" */
- unsigned int len; /* Length of file including header */
- unsigned int crc32; /* 32-bit CRC from flag_version to end of file */
- unsigned int flag_version; /* 0:15 flags, 16:31 version */
- unsigned int offsets[3]; /* Offsets of partitions from start of header */
-};
-
-struct env_var {
- char *name;
- char *value;
-};
-
-/* beyound the image end, size not known in advance */
-extern unsigned char workspace[];
-extern void board_init(void);
-
-static CLzmaDecoderState lzma_state;
-
-typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1,
- unsigned long reg_a2, unsigned long reg_a3);
-
-static int decompress_data(CLzmaDecoderState *vs, unsigned char *outStream,
- UInt32 outSize);
-
-#ifdef CONFIG_PASS_KARGS
-#define ENVV(n,v) {.name = (n), .value = (v)}
-struct env_var env_vars[] = {
- ENVV("board_name", CONFIG_BOARD_NAME),
- ENVV(NULL, NULL)
-};
-#endif
-
-static void halt(void)
-{
- printf("\nSystem halted!\n");
- for(;;);
-}
-
-#if (LZMA_WRAPPER)
-extern unsigned char _lzma_data_start[];
-extern unsigned char _lzma_data_end[];
-
-unsigned char *data;
-unsigned long datalen;
-
-static __inline__ unsigned char get_byte(void)
-{
- datalen--;
- return *data++;
-}
-
-static void decompress_init(void)
-{
- data = _lzma_data_start;
- datalen = _lzma_data_end - _lzma_data_start;
-}
-
-static int decompress_data(CLzmaDecoderState *vs, unsigned char *outStream,
- SizeT outSize)
-{
- SizeT ip, op;
-
- return LzmaDecode(vs, data, datalen, &ip, outStream, outSize, &op);
-}
-#endif /* LZMA_WRAPPER */
-
-#if !(LZMA_WRAPPER)
-
-#define FLASH_BANK_SIZE (2<<20)
-
-static unsigned char *flash_base = (unsigned char *) KSEG1ADDR(ADM5120_FLASH_START);
-static unsigned long flash_ofs = 0;
-static unsigned long flash_max = 0;
-static unsigned long flash_ofs_mask = (FLASH_BANK_SIZE-1);
-
-static __inline__ unsigned char get_byte(void)
-{
- return *(flash_base+flash_ofs++);
-}
-
-static int lzma_read_byte(void *object, const unsigned char **buffer,
- SizeT *bufferSize)
-{
- unsigned long len;
-
- if (flash_ofs >= flash_max)
- return LZMA_RESULT_DATA_ERROR;
-
- len = flash_max-flash_ofs;
-
-#if (CONFIG_FLASH_SIZE > FLASH_BANK_SIZE)
- if (flash_ofs < FLASH_BANK_SIZE) {
- /* switch to bank 0 */
- DBG("lzma_read_byte: switch to bank 0\n");
-
- if (len > FLASH_BANK_SIZE-flash_ofs)
- len = FLASH_BANK_SIZE-flash_ofs;
- } else {
- /* switch to bank 1 */
- DBG("lzma_read_byte: switch to bank 1\n");
- }
-#endif
- DBG("lzma_read_byte: ofs=%08X, len=%08X\n", flash_ofs, len);
-
- *buffer = flash_base+(flash_ofs & flash_ofs_mask);
- *bufferSize = len;
- flash_ofs += len;
-
- return LZMA_RESULT_OK;
-}
-
-static ILzmaInCallback lzma_callback = {
- .Read = lzma_read_byte,
-};
-
-static __inline__ unsigned int read_le32(void *buf)
-{
- unsigned char *p = buf;
-
- return ((unsigned int)p[0] + ((unsigned int)p[1] << 8) +
- ((unsigned int)p[2] << 16) +((unsigned int)p[3] << 24));
-}
-
-static void decompress_init(void)
-{
- struct trx_header *hdr = NULL;
- unsigned long kofs,klen;
-
- printf("Looking for TRX header... ");
- /* look for trx header, 32-bit data access */
- for (flash_ofs = 0; flash_ofs < FLASH_BANK_SIZE; flash_ofs += TRX_ALIGN) {
- if (read_le32(&flash_base[flash_ofs]) == TRX_MAGIC) {
- hdr = (struct trx_header *)&flash_base[flash_ofs];
- break;
- }
- }
-
- if (hdr == NULL) {
- printf("not found!\n");
- /* no compressed kernel found, halting */
- halt();
- }
-
- /* compressed kernel is in the partition 0 or 1 */
- kofs = read_le32(&hdr->offsets[1]);
- if (kofs == 0 || kofs > 65536) {
- klen = kofs-read_le32(&hdr->offsets[0]);
- kofs = read_le32(&hdr->offsets[0]);
- } else {
- klen = read_le32(&hdr->offsets[2]);
- if (klen > kofs)
- klen -= kofs;
- else
- klen = read_le32(&hdr->len)-kofs;
- }
-
- printf("found at %08X, kernel:%08X len:%08X\n", flash_ofs,
- kofs, klen);
-
- flash_ofs += kofs;
- flash_max = flash_ofs+klen;
-}
-
-static int decompress_data(CLzmaDecoderState *vs, unsigned char *outStream,
- SizeT outSize)
-{
- SizeT op;
-
-#if 0
- vs->Buffer = data;
- vs->BufferLim = datalen;
-#endif
-
- return LzmaDecode(vs, &lzma_callback, outStream, outSize, &op);
-}
-#endif /* !(LZMA_WRAPPER) */
-
-/* should be the first function */
-void decompress_entry(unsigned long reg_a0, unsigned long reg_a1,
- unsigned long reg_a2, unsigned long reg_a3,
- unsigned long icache_size, unsigned long icache_lsize,
- unsigned long dcache_size, unsigned long dcache_lsize)
-{
- unsigned char props[LZMA_PROPERTIES_SIZE];
- unsigned int i; /* temp value */
- SizeT osize; /* uncompressed size */
- int res;
-
- board_init();
-
- printf("\n\nLZMA loader for " CONFIG_BOARD_NAME
- ", Copyright (C) 2007-2008 OpenWrt.org\n\n");
-
- decompress_init();
-
- /* lzma args */
- for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
- props[i] = get_byte();
-
- /* skip rest of the LZMA coder property */
- /* read the lower half of uncompressed size in the header */
- osize = ((SizeT)get_byte()) +
- ((SizeT)get_byte() << 8) +
- ((SizeT)get_byte() << 16) +
- ((SizeT)get_byte() << 24);
-
- /* skip rest of the header (upper half of uncompressed size) */
- for (i = 0; i < 4; i++)
- get_byte();
-
- res = LzmaDecodeProperties(&lzma_state.Properties, props,
- LZMA_PROPERTIES_SIZE);
- if (res != LZMA_RESULT_OK) {
- printf("Incorrect LZMA stream properties!\n");
- halt();
- }
-
- printf("decompressing kernel... ");
-
- lzma_state.Probs = (CProb *)workspace;
- res = decompress_data(&lzma_state, (unsigned char *)LOADADDR, osize);
-
- if (res != LZMA_RESULT_OK) {
- printf("failed, ");
- switch (res) {
- case LZMA_RESULT_DATA_ERROR:
- printf("data error!\n");
- break;
- default:
- printf("unknown error %d!\n", res);
- }
- halt();
- } else
- printf("done!\n");
-
- blast_dcache(dcache_size, dcache_lsize);
- blast_icache(icache_size, icache_lsize);
-
- printf("launching kernel...\n\n");
-
-#ifdef CONFIG_PASS_KARGS
- reg_a0 = 0;
- reg_a1 = 0;
- reg_a2 = (unsigned long)env_vars;
- reg_a3 = 0;
-#endif
- /* Jump to load address */
- ((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3);
-}
diff --git a/target/linux/adm5120/image/lzma-loader/src/head.S b/target/linux/adm5120/image/lzma-loader/src/head.S
deleted file mode 100644
index ee8b320..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/head.S
+++ /dev/null
@@ -1,209 +0,0 @@
-/* Copyright 2007 Gabor Juhos <juhosg@freemail.hu> */
-/* keep original values of the a0,a1,a2,a3 registers */
-/* modifed to support user defined entry point address */
-/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */
-/* cache manipulation adapted from Broadcom code */
-/* idea taken from original bunzip2 decompressor code */
-/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */
-/* Licensed under the linux kernel's version of the GPL.*/
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-
-#define KSEG0 0x80000000
-
-#define C0_STATUS $12
-#define C0_CAUSE $13
-#define C0_CONFIG $16
-#define C0_WATCHLO $18
-#define C0_WATCHHI $19
-#define C0_TAGLO $28
-#define C0_TAGHI $29
-
-#define CONF1_DA_SHIFT 7 /* D$ associativity */
-#define CONF1_DA_MASK 0x00000380
-#define CONF1_DA_BASE 1
-#define CONF1_DL_SHIFT 10 /* D$ line size */
-#define CONF1_DL_MASK 0x00001c00
-#define CONF1_DL_BASE 2
-#define CONF1_DS_SHIFT 13 /* D$ sets/way */
-#define CONF1_DS_MASK 0x0000e000
-#define CONF1_DS_BASE 64
-#define CONF1_IA_SHIFT 16 /* I$ associativity */
-#define CONF1_IA_MASK 0x00070000
-#define CONF1_IA_BASE 1
-#define CONF1_IL_SHIFT 19 /* I$ line size */
-#define CONF1_IL_MASK 0x00380000
-#define CONF1_IL_BASE 2
-#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
-#define CONF1_IS_MASK 0x01c00000
-#define CONF1_IS_BASE 64
-
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-
- .text
-
-#if (LZMA_STARTUP_ORG)
- .set noreorder
-
- b startup
- nop
-
- .org LZMA_STARTUP_ORG
-#endif
-
-LEAF(startup)
- .set noreorder
- .set mips32
-
- mtc0 zero, C0_WATCHLO # clear watch registers
- mtc0 zero, C0_WATCHHI
-
- mtc0 zero, C0_CAUSE # clear before writing status register
-
- mfc0 t0, C0_STATUS # get status register
- li t1, ~(0xFF01)
- and t0, t1 # mask interrupts
- mtc0 t0, C0_STATUS # set up status register
-
- move t1, ra # save return address
- la t0, __reloc_label # get linked address of label
- bal __reloc_label # branch and link to label to
- nop # get actual address
-__reloc_label:
- subu t0, ra, t0 # get reloc_delta
- move ra, t1 # restore return address
-
- beqz t0, __reloc_end # if delta is 0 we are in the right place
- nop
-
- /* Copy our code to the right place */
- la t1, _code_start # get linked address of _code_start
- la t2, _code_end # get linked address of _code_end
- addu t0, t0, t1 # calculate actual address of _code_start
-
-__reloc_copy:
- lw t3, 0(t0)
- sw t3, 0(t1)
- add t1, 4
- blt t1, t2, __reloc_copy
- add t0, 4
-
-__reloc_end:
-
- /* At this point we need to invalidate dcache and */
- /* icache before jumping to new code */
-
-1: /* Get cache sizes */
- .set mips32
- mfc0 s0,C0_CONFIG,1
- .set mips0
-
- li s1,CONF1_DL_MASK
- and s1,s0
- beq s1,zero,nodc
- nop
-
- srl s1,CONF1_DL_SHIFT
- li t0,CONF1_DL_BASE
- sll s1,t0,s1 /* s1 has D$ cache line size */
-
- li s2,CONF1_DA_MASK
- and s2,s0
- srl s2,CONF1_DA_SHIFT
- addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */
-
- li t0,CONF1_DS_MASK
- and t0,s0
- srl t0,CONF1_DS_SHIFT
- li s3,CONF1_DS_BASE
- sll s3,s3,t0 /* s3 has D$ sets per way */
-
- multu s2,s3 /* sets/way * associativity */
- mflo t0 /* total cache lines */
-
- multu s1,t0 /* D$ linesize * lines */
- mflo s2 /* s2 is now D$ size in bytes */
-
- /* Initilize the D$: */
- mtc0 zero,C0_TAGLO
- mtc0 zero,C0_TAGHI
-
- li t0,KSEG0 /* Just an address for the first $ line */
- addu t1,t0,s2 /* + size of cache == end */
-
- .set mips3
-1: cache Index_Writeback_Inv_D,0(t0)
- .set mips0
- bne t0,t1,1b
- addu t0,s1
-
-nodc:
- /* Now we get to do it all again for the I$ */
-
- move s3,zero /* just in case there is no icache */
- move s4,zero
-
- li t0,CONF1_IL_MASK
- and t0,s0
- beq t0,zero,noic
- nop
-
- srl t0,CONF1_IL_SHIFT
- li s3,CONF1_IL_BASE
- sll s3,t0 /* s3 has I$ cache line size */
-
- li t0,CONF1_IA_MASK
- and t0,s0
- srl t0,CONF1_IA_SHIFT
- addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */
-
- li t0,CONF1_IS_MASK
- and t0,s0
- srl t0,CONF1_IS_SHIFT
- li s5,CONF1_IS_BASE
- sll s5,t0 /* s5 has I$ sets per way */
-
- multu s4,s5 /* sets/way * associativity */
- mflo t0 /* s4 is now total cache lines */
-
- multu s3,t0 /* I$ linesize * lines */
- mflo s4 /* s4 is cache size in bytes */
-
- /* Initilize the I$: */
- mtc0 zero,C0_TAGLO
- mtc0 zero,C0_TAGHI
-
- li t0,KSEG0 /* Just an address for the first $ line */
- addu t1,t0,s4 /* + size of cache == end */
-
- .set mips3
-1: cache Index_Invalidate_I,0(t0)
- .set mips0
- bne t0,t1,1b
- addu t0,s3
-
-noic:
- /* Setup new "C" stack */
- la sp, _stack
-
- addiu sp, -32 /* reserve stack for parameters */
-#if 0
- sw a0, 0(sp)
- sw a1, 4(sp)
- sw a2, 8(sp)
- sw a3, 12(sp)
-#endif
- sw s3, 16(sp) /* icache line size */
- sw s4, 20(sp) /* icache size */
- sw s1, 24(sp) /* dcache line size */
- sw s2, 28(sp) /* dcache size */
-
- /* jump to the decompressor routine */
- la t0, decompress_entry
- jr t0
- nop
-
- .set reorder
-END(startup)
diff --git a/target/linux/adm5120/image/lzma-loader/src/loader.lds b/target/linux/adm5120/image/lzma-loader/src/loader.lds
deleted file mode 100644
index bae70fb..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/loader.lds
+++ /dev/null
@@ -1,29 +0,0 @@
-OUTPUT_ARCH(mips)
-SECTIONS {
- .text : {
- _code_start = .;
- *(.text)
- *(.text.*)
- *(.rodata)
- *(.rodata.*)
- . = ALIGN(16);
- *(.data.lzma)
- }
-
- .data : {
- *(.data)
- *(.data.*)
- }
- _code_end = .;
-
- .bss : {
- *(.bss)
- *(.bss.*)
- }
-
- . = ALIGN(16);
- . = . + 8192;
- _stack = .;
-
- workspace = .;
-}
diff --git a/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds
deleted file mode 100644
index abf756b..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds
+++ /dev/null
@@ -1,8 +0,0 @@
-OUTPUT_ARCH(mips)
-SECTIONS {
- .data.lzma : {
- _lzma_data_start = .;
- *(.data)
- _lzma_data_end = .;
- }
-}
diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.c b/target/linux/adm5120/image/lzma-loader/src/printf.c
deleted file mode 100644
index 7bb5a86..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/printf.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include "printf.h"
-
-extern void board_putc(int ch);
-
-/* this is the maximum width for a variable */
-#define LP_MAX_BUF 256
-
-/* macros */
-#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') )
-#define Ctod(x) ( (x) - '0')
-
-/* forward declaration */
-static int PrintChar(char *, char, int, int);
-static int PrintString(char *, char *, int, int);
-static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
-
-/* private variable */
-static const char theFatalMsg[] = "fatal error in lp_Print!";
-
-/* -*-
- * A low level printf() function.
- */
-static void
-lp_Print(void (*output)(void *, char *, int),
- void * arg,
- char *fmt,
- va_list ap)
-{
-
-#define OUTPUT(arg, s, l) \
- { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
- (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
- } else { \
- (*output)(arg, s, l); \
- } \
- }
-
- char buf[LP_MAX_BUF];
-
- char c;
- char *s;
- long int num;
-
- int longFlag;
- int negFlag;
- int width;
- int prec;
- int ladjust;
- char padc;
-
- int length;
-
- for(;;) {
- {
- /* scan for the next '%' */
- char *fmtStart = fmt;
- while ( (*fmt != '\0') && (*fmt != '%')) {
- fmt ++;
- }
-
- /* flush the string found so far */
- OUTPUT(arg, fmtStart, fmt-fmtStart);
-
- /* are we hitting the end? */
- if (*fmt == '\0') break;
- }
-
- /* we found a '%' */
- fmt ++;
-
- /* check for long */
- if (*fmt == 'l') {
- longFlag = 1;
- fmt ++;
- } else {
- longFlag = 0;
- }
-
- /* check for other prefixes */
- width = 0;
- prec = -1;
- ladjust = 0;
- padc = ' ';
-
- if (*fmt == '-') {
- ladjust = 1;
- fmt ++;
- }
-
- if (*fmt == '0') {
- padc = '0';
- fmt++;
- }
-
- if (IsDigit(*fmt)) {
- while (IsDigit(*fmt)) {
- width = 10 * width + Ctod(*fmt++);
- }
- }
-
- if (*fmt == '.') {
- fmt ++;
- if (IsDigit(*fmt)) {
- prec = 0;
- while (IsDigit(*fmt)) {
- prec = prec*10 + Ctod(*fmt++);
- }
- }
- }
-
-
- /* check format flag */
- negFlag = 0;
- switch (*fmt) {
- case 'b':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'd':
- case 'D':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- if (num < 0) {
- num = - num;
- negFlag = 1;
- }
- length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'o':
- case 'O':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'u':
- case 'U':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'x':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'X':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
- OUTPUT(arg, buf, length);
- break;
-
- case 'c':
- c = (char)va_arg(ap, int);
- length = PrintChar(buf, c, width, ladjust);
- OUTPUT(arg, buf, length);
- break;
-
- case 's':
- s = (char*)va_arg(ap, char *);
- length = PrintString(buf, s, width, ladjust);
- OUTPUT(arg, buf, length);
- break;
-
- case '\0':
- fmt --;
- break;
-
- default:
- /* output this char as it is */
- OUTPUT(arg, fmt, 1);
- } /* switch (*fmt) */
-
- fmt ++;
- } /* for(;;) */
-
- /* special termination call */
- OUTPUT(arg, "\0", 1);
-}
-
-
-/* --------------- local help functions --------------------- */
-static int
-PrintChar(char * buf, char c, int length, int ladjust)
-{
- int i;
-
- if (length < 1) length = 1;
- if (ladjust) {
- *buf = c;
- for (i=1; i< length; i++) buf[i] = ' ';
- } else {
- for (i=0; i< length-1; i++) buf[i] = ' ';
- buf[length - 1] = c;
- }
- return length;
-}
-
-static int
-PrintString(char * buf, char* s, int length, int ladjust)
-{
- int i;
- int len=0;
- char* s1 = s;
- while (*s1++) len++;
- if (length < len) length = len;
-
- if (ladjust) {
- for (i=0; i< len; i++) buf[i] = s[i];
- for (i=len; i< length; i++) buf[i] = ' ';
- } else {
- for (i=0; i< length-len; i++) buf[i] = ' ';
- for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
- }
- return length;
-}
-
-static int
-PrintNum(char * buf, unsigned long u, int base, int negFlag,
- int length, int ladjust, char padc, int upcase)
-{
- /* algorithm :
- * 1. prints the number from left to right in reverse form.
- * 2. fill the remaining spaces with padc if length is longer than
- * the actual length
- * TRICKY : if left adjusted, no "0" padding.
- * if negtive, insert "0" padding between "0" and number.
- * 3. if (!ladjust) we reverse the whole string including paddings
- * 4. otherwise we only reverse the actual string representing the num.
- */
-
- int actualLength =0;
- char *p = buf;
- int i;
-
- do {
- int tmp = u %base;
- if (tmp <= 9) {
- *p++ = '0' + tmp;
- } else if (upcase) {
- *p++ = 'A' + tmp - 10;
- } else {
- *p++ = 'a' + tmp - 10;
- }
- u /= base;
- } while (u != 0);
-
- if (negFlag) {
- *p++ = '-';
- }
-
- /* figure out actual length and adjust the maximum length */
- actualLength = p - buf;
- if (length < actualLength) length = actualLength;
-
- /* add padding */
- if (ladjust) {
- padc = ' ';
- }
- if (negFlag && !ladjust && (padc == '0')) {
- for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
- buf[length -1] = '-';
- } else {
- for (i = actualLength; i< length; i++) buf[i] = padc;
- }
-
-
- /* prepare to reverse the string */
- {
- int begin = 0;
- int end;
- if (ladjust) {
- end = actualLength - 1;
- } else {
- end = length -1;
- }
-
- while (end > begin) {
- char tmp = buf[begin];
- buf[begin] = buf[end];
- buf[end] = tmp;
- begin ++;
- end --;
- }
- }
-
- /* adjust the string pointer */
- return length;
-}
-
-static void printf_output(void *arg, char *s, int l)
-{
- int i;
-
- // special termination call
- if ((l==1) && (s[0] == '\0')) return;
-
- for (i=0; i< l; i++) {
- board_putc(s[i]);
- if (s[i] == '\n') board_putc('\r');
- }
-}
-
-void printf(char *fmt, ...)
-{
- va_list ap;
- va_start(ap, fmt);
- lp_Print(printf_output, 0, fmt, ap);
- va_end(ap);
-}
diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.h b/target/linux/adm5120/image/lzma-loader/src/printf.h
deleted file mode 100644
index 9b1c1df..0000000
--- a/target/linux/adm5120/image/lzma-loader/src/printf.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _printf_h_
-#define _printf_h_
-
-#include <stdarg.h>
-void printf(char *fmt, ...);
-
-#endif /* _printf_h_ */
generated by cgit v1.1 at 2024-11-25 06:10:07 +0000