summaryrefslogtreecommitdiff
path: root/target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch')
-rw-r--r--target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch328
1 files changed, 328 insertions, 0 deletions
diff --git a/target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch b/target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch
new file mode 100644
index 0000000..f1edb9c
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch
@@ -0,0 +1,328 @@
+From b1c54da602ae9215cfbde1c3ed3b6296b76f07fc Mon Sep 17 00:00:00 2001
+Message-Id: <b1c54da602ae9215cfbde1c3ed3b6296b76f07fc.1486337989.git.chunkeey@googlemail.com>
+In-Reply-To: <246bd6614529d28dc48b11981ab5dae7a7364fc2.1486337989.git.chunkeey@googlemail.com>
+References: <246bd6614529d28dc48b11981ab5dae7a7364fc2.1486337989.git.chunkeey@googlemail.com>
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Mon, 13 Jun 2016 15:42:21 +0200
+Subject: [RFC 2/2] net: emac: add support for device-tree based PHY discovery
+ and setup
+To: netdev@vger.kernel.org,
+ devicetree@vger.kernel.org
+Cc: David S. Miller <davem@davemloft.net>,
+ Ivan Mikhaylov <ivan@de.ibm.com>,
+ Mark Rutland <mark.rutland@arm.com>,
+ Rob Herring <robh+dt@kernel.org>
+
+This patch adds glue-code that allows the EMAC driver to interface
+with the existing dt-supported PHYs in drivers/net/phy.
+
+Because currently, the emac driver maintains a small library of
+supported phys for in a private phy.c file located in the drivers
+directory.
+
+The support is limited to mostly single ethernet transceiver like the:
+CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035.
+However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W)
+have a 5-port switch (QCA8327N) attached to the MDIO of the EMAC.
+The switch chip has already a proper phy-driver (ar8216) that uses
+the generic phy library.
+
+Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
+---
+--- a/drivers/net/ethernet/ibm/emac/core.c
++++ b/drivers/net/ethernet/ibm/emac/core.c
+@@ -42,6 +42,7 @@
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
+ #include <linux/of_net.h>
++#include <linux/of_mdio.h>
+ #include <linux/slab.h>
+
+ #include <asm/processor.h>
+@@ -2422,6 +2423,229 @@ static int emac_read_uint_prop(struct de
+ return 0;
+ }
+
++static void emac_adjust_link(struct net_device *ndev)
++{
++ struct emac_instance *dev = netdev_priv(ndev);
++ struct phy_device *phy = dev->phy_dev;
++
++ dev->phy.autoneg = phy->autoneg;
++ dev->phy.speed = phy->speed;
++ dev->phy.duplex = phy->duplex;
++ dev->phy.pause = phy->pause;
++ dev->phy.asym_pause = phy->asym_pause;
++ dev->phy.advertising = phy->advertising;
++}
++
++static int emac_mii_bus_read(struct mii_bus *bus, int addr, int regnum)
++{
++ return emac_mdio_read(bus->priv, addr, regnum);
++}
++
++static int emac_mii_bus_write(struct mii_bus *bus, int addr, int regnum, u16 val)
++{
++ emac_mdio_write(bus->priv, addr, regnum, val);
++ return 0;
++}
++
++static int emac_mii_bus_reset(struct mii_bus *bus)
++{
++ struct emac_instance *dev = netdev_priv(bus->priv);
++ int err;
++
++ err = emac_reset(dev);
++ if (err)
++ return err;
++ /* Meraki MX60(W)'s uboot will disable the switch and
++ * a bus reset won't do anything. */
++ emac_mii_reset_phy(&dev->phy);
++ return 0;
++}
++
++static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++
++ dev->phy.autoneg = AUTONEG_ENABLE;
++ dev->phy.speed = SPEED_1000;
++ dev->phy.duplex = DUPLEX_FULL;
++ dev->phy.advertising = advertise;
++ phy->autoneg = AUTONEG_ENABLE;
++ phy->speed = dev->phy.speed;
++ phy->duplex = dev->phy.duplex;
++ phy->advertising = advertise;
++ return phy_start_aneg(dev->phy_dev);
++}
++
++static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++
++ dev->phy.autoneg = AUTONEG_DISABLE;
++ dev->phy.speed = speed;
++ dev->phy.duplex = fd;
++ phy->autoneg = AUTONEG_DISABLE;
++ phy->speed = speed;
++ phy->duplex = fd;
++ return phy_start_aneg(dev->phy_dev);
++}
++
++static int emac_mdio_poll_link(struct mii_phy *phy)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++ int res;
++
++ res = phy_read_status(dev->phy_dev);
++ if (res) {
++ dev_err(&dev->ofdev->dev, "link update failed (%d).", res);
++ return ethtool_op_get_link(ndev);
++ }
++
++ return dev->phy_dev->link;
++}
++
++static int emac_mdio_read_link(struct mii_phy *phy)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++ int res;
++
++ res = phy_read_status(dev->phy_dev);
++ if (res)
++ return res;
++
++ dev->phy.speed = phy->speed;
++ dev->phy.duplex = phy->duplex;
++ dev->phy.pause = phy->pause;
++ dev->phy.asym_pause = phy->asym_pause;
++ return 0;
++}
++
++static int emac_mdio_init_phy(struct mii_phy *phy)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++
++ phy_start(dev->phy_dev);
++ dev->phy.autoneg = phy->autoneg;
++ dev->phy.speed = phy->speed;
++ dev->phy.duplex = phy->duplex;
++ dev->phy.advertising = phy->advertising;
++ dev->phy.pause = phy->pause;
++ dev->phy.asym_pause = phy->asym_pause;
++
++ return phy_init_hw(dev->phy_dev);
++}
++
++static const struct mii_phy_ops emac_dt_mdio_phy_ops = {
++ .init = emac_mdio_init_phy,
++ .setup_aneg = emac_mdio_setup_aneg,
++ .setup_forced = emac_mdio_setup_forced,
++ .poll_link = emac_mdio_poll_link,
++ .read_link = emac_mdio_read_link,
++};
++
++static int emac_dt_mdio_probe(struct emac_instance *dev)
++{
++ struct device_node *mii_np;
++ int res;
++
++ mii_np = of_get_child_by_name(dev->ofdev->dev.of_node, "mdio");
++ if (!mii_np) {
++ dev_err(&dev->ofdev->dev, "no mdio definition found.");
++ return -ENODEV;
++ }
++
++ if (!of_device_is_available(mii_np)) {
++ res = 1;
++ goto put_node;
++ }
++
++ dev->mii_bus = devm_mdiobus_alloc(&dev->ofdev->dev);
++ if (!dev->mii_bus) {
++ res = -ENOMEM;
++ goto put_node;
++ }
++
++ dev->mii_bus->priv = dev->ndev;
++ dev->mii_bus->parent = dev->ndev->dev.parent;
++ dev->mii_bus->name = "emac_mdio";
++ dev->mii_bus->read = &emac_mii_bus_read;
++ dev->mii_bus->write = &emac_mii_bus_write;
++ dev->mii_bus->reset = &emac_mii_bus_reset;
++ snprintf(dev->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev->ofdev->name);
++ res = of_mdiobus_register(dev->mii_bus, mii_np);
++ if (res) {
++ dev_err(&dev->ofdev->dev, "cannot register MDIO bus %s (%d)",
++ dev->mii_bus->name, res);
++ }
++
++ put_node:
++ of_node_put(mii_np);
++ return res;
++}
++
++static int emac_dt_phy_probe(struct emac_instance *dev,
++ struct device_node *phy_handle)
++{
++ u32 phy_flags = 0;
++ int res;
++
++ res = of_property_read_u32(phy_handle, "phy-flags", &phy_flags);
++ if (res < 0 && res != -EINVAL)
++ return res;
++
++ dev->phy.def = devm_kzalloc(&dev->ofdev->dev, sizeof(*dev->phy.def),
++ GFP_KERNEL);
++ if (!dev->phy.def)
++ return -ENOMEM;
++
++ dev->phy_dev = of_phy_connect(dev->ndev, phy_handle,
++ &emac_adjust_link, phy_flags,
++ PHY_INTERFACE_MODE_RGMII);
++ if (!dev->phy_dev) {
++ dev_err(&dev->ofdev->dev, "failed to connect to PHY.\n");
++ return -ENODEV;
++ }
++
++ dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
++ dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
++ dev->phy.def->name = dev->phy_dev->drv->name;
++ dev->phy.def->ops = &emac_dt_mdio_phy_ops;
++ dev->phy.features = dev->phy_dev->supported;
++ dev->phy.address = dev->phy_dev->mdio.addr;
++ dev->phy.mode = dev->phy_dev->interface;
++ return 0;
++}
++
++static int emac_probe_dt_phy(struct emac_instance *dev)
++{
++ struct device_node *np = dev->ofdev->dev.of_node;
++ struct device_node *phy_handle;
++ int res = 0;
++
++ phy_handle = of_parse_phandle(np, "phy-handle", 0);
++
++ if (phy_handle) {
++ res = emac_dt_mdio_probe(dev);
++ if (!res) {
++ res = emac_dt_phy_probe(dev, phy_handle);
++ if (!res)
++ res = 1;
++ else
++ mdiobus_unregister(dev->mii_bus);
++ }
++ }
++
++ of_node_put(phy_handle);
++ /* if no phy device was specified in the device tree, then we fallback
++ * to the old emac_phy.c probe code for compatibility reasons.
++ */
++ return res;
++}
++
+ static int emac_init_phy(struct emac_instance *dev)
+ {
+ struct device_node *np = dev->ofdev->dev.of_node;
+@@ -2492,6 +2716,22 @@ static int emac_init_phy(struct emac_ins
+
+ emac_configure(dev);
+
++ if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
++ int res = emac_probe_dt_phy(dev);
++
++ if (res == 1) {
++ mutex_unlock(&emac_phy_map_lock);
++ goto init_phy;
++ } else if (res < 0) {
++ mutex_unlock(&emac_phy_map_lock);
++ dev_err(&dev->ofdev->dev, "failed to attach dt phy (%d).\n",
++ res);
++ return res;
++ }
++
++ /* continue with old code */
++ }
++
+ if (dev->phy_address != 0xffffffff)
+ phy_map = ~(1 << dev->phy_address);
+
+@@ -2519,6 +2759,7 @@ static int emac_init_phy(struct emac_ins
+ return -ENXIO;
+ }
+
++ init_phy:
+ /* Init PHY */
+ if (dev->phy.def->ops->init)
+ dev->phy.def->ops->init(&dev->phy);
+@@ -2987,6 +3228,12 @@ static int emac_remove(struct platform_d
+ if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
+ zmii_detach(dev->zmii_dev, dev->zmii_port);
+
++ if (dev->phy_dev)
++ phy_disconnect(dev->phy_dev);
++
++ if (dev->mii_bus)
++ mdiobus_unregister(dev->mii_bus);
++
+ busy_phy_map &= ~(1 << dev->phy.address);
+ DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
+
+--- a/drivers/net/ethernet/ibm/emac/core.h
++++ b/drivers/net/ethernet/ibm/emac/core.h
+@@ -199,6 +199,10 @@ struct emac_instance {
+ struct emac_instance *mdio_instance;
+ struct mutex mdio_lock;
+
++ /* Device-tree based phy configuration */
++ struct mii_bus *mii_bus;
++ struct phy_device *phy_dev;
++
+ /* ZMII infos if any */
+ u32 zmii_ph;
+ u32 zmii_port;
generated by cgit v1.1 at 2024-07-10 14:04:36 +0000