diff options
Diffstat (limited to 'target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c')
| -rw-r--r-- | target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c b/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c deleted file mode 100644 index cae1fe9..0000000 --- a/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright (C) 2008 I2SE GmbH - * Copyright (C) 2010 IEQualize GmbH - * Copyright (C) 2010-2011 Michael Heimpold - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/fb.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include <video/atmel_lcdc.h> - -#include "sam9_smc.h" -#include "generic.h" - -#include <linux/atmel_serial.h> - - -static void __init tqma9263_map_io(void) -{ - unsigned pins; - - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1 */ - pins = ATMEL_UART_CTS | ATMEL_UART_RTS | - ATMEL_UART_DSR | ATMEL_UART_DTR | - ATMEL_UART_DCD | ATMEL_UART_RI; - at91_register_uart(AT91SAM9263_ID_US0, 1, pins); - - /* USART1 on ttyS2 */ - pins = ATMEL_UART_RTS; - at91_register_uart(AT91SAM9263_ID_US1, 2, pins); - - /* USART2 on ttyS3 */ - pins = ATMEL_UART_RTS; - at91_register_uart(AT91SAM9263_ID_US2, 3, pins); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata tqma9263_usbh_data = { - .ports = 2, - .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, - .vbus_pin_active_low = 0, -}; - - -/* - * USB Device port - */ -static struct at91_udc_data __initdata tqma9263_udc_data = { - .vbus_pin = AT91_PIN_PA25, - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata tqma9263_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PB28, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata tqma9263_macb_data = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - - -/* - * I2C devices - */ -static struct i2c_board_info __initdata tqma9263_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, - { - I2C_BOARD_INFO("24c04", 0x52), - }, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata tqma9263_nand_partition[] = { - { - .name = "uboot", - .offset = 0, - .size = 3 * SZ_128K, - }, - { - .name = "uboot-env", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, - { - .name = "linux", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_2M, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(tqma9263_nand_partition); - return tqma9263_nand_partition; -} - -static struct atmel_nand_data __initdata tqma9263_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PD14, - .enable_pin = AT91_PIN_PD15, -}; - -static struct sam9_smc_config __initdata tqma9263_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init tqma9263_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &tqma9263_nand_smc_config); - - at91_add_device_nand(&tqma9263_nand_data); -} - - -static void __init tqma9263_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&tqma9263_usbh_data); - /* USB Device */ - at91_add_device_udc(&tqma9263_udc_data); - /* MMC */ - at91_add_device_mmc(1, &tqma9263_mmc_data); - /* I2C */ - at91_add_device_i2c(tqma9263_i2c_devices, ARRAY_SIZE(tqma9263_i2c_devices)); - /* Ethernet */ - at91_add_device_eth(&tqma9263_macb_data); - /* NAND flash */ - tqma9263_add_device_nand(); -} - -MACHINE_START(TQMA9263, "TQ Components TQMa9263") - /* Maintainer: Michael Heimpold */ - .timer = &at91sam926x_timer, - .map_io = tqma9263_map_io, - .init_irq = at91_init_irq_default, - .init_machine = tqma9263_board_init, -MACHINE_END |