diff options
Diffstat (limited to 'target/linux/at91/patches')
4 files changed, 0 insertions, 106 deletions
diff --git a/target/linux/at91/patches/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches/100-ARM-at91-build-dtb-for-LMU5000.patch deleted file mode 100644 index c631f8d..0000000 --- a/target/linux/at91/patches/100-ARM-at91-build-dtb-for-LMU5000.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb - dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb - # sam9g45 - dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb -+dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb - dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb - # sam9n12 - dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb diff --git a/target/linux/at91/patches/700-tqma9263-support.patch b/target/linux/at91/patches/700-tqma9263-support.patch deleted file mode 100644 index d249783..0000000 --- a/target/linux/at91/patches/700-tqma9263-support.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/arm/mach-at91/Kconfig.non_dt -+++ b/arch/arm/mach-at91/Kconfig.non_dt -@@ -258,6 +258,12 @@ config MACH_USB_A9263 - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - -+config MACH_TQMA9263 -+ bool "TQ Components TQMa9263 board" -+ help -+ Select this if you are using the an TQ Components TQMa9263 board. -+ <http://www.tq-components.com/> -+ - endif - - # ---------------------------------------------------------- ---- a/arch/arm/mach-at91/Makefile -+++ b/arch/arm/mach-at91/Makefile -@@ -68,6 +68,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar - # AT91SAM9263 board-specific support - obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o - obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o -+obj-$(CONFIG_MACH_TQMA9263) += board-tqma9263.o - - # AT91SAM9RL board-specific support - obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o diff --git a/target/linux/at91/patches/805-free_some_portc_pins.patch b/target/linux/at91/patches/805-free_some_portc_pins.patch deleted file mode 100644 index a9694d1..0000000 --- a/target/linux/at91/patches/805-free_some_portc_pins.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/mach-at91/at91sam9260_devices.c -+++ b/arch/arm/mach-at91/at91sam9260_devices.c -@@ -507,7 +507,7 @@ static struct platform_device at91sam926 - .num_resources = ARRAY_SIZE(spi1_resources), - }; - --static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; -+static const unsigned spi1_standard_cs[2] = { AT91_PIN_PB3, AT91_PIN_PC5 }; - - void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) - { diff --git a/target/linux/at91/patches/901-AT91-flexibity-default-leds-to-heartbeat.patch b/target/linux/at91/patches/901-AT91-flexibity-default-leds-to-heartbeat.patch deleted file mode 100644 index a97850a..0000000 --- a/target/linux/at91/patches/901-AT91-flexibity-default-leds-to-heartbeat.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/arm/mach-at91/board-flexibity.c -+++ b/arch/arm/mach-at91/board-flexibity.c -@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[] - .name = "usb1:green", - .gpio = AT91_PIN_PA12, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb1:red", - .gpio = AT91_PIN_PA13, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb2:green", - .gpio = AT91_PIN_PB26, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb2:red", - .gpio = AT91_PIN_PB27, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb3:green", - .gpio = AT91_PIN_PC8, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb3:red", - .gpio = AT91_PIN_PC6, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb4:green", - .gpio = AT91_PIN_PB4, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb4:red", - .gpio = AT91_PIN_PB5, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - } - }; - |