diff options
Diffstat (limited to 'target/linux/atheros/base-files')
6 files changed, 0 insertions, 214 deletions
diff --git a/target/linux/atheros/base-files/etc/config/system b/target/linux/atheros/base-files/etc/config/system deleted file mode 100644 index 1d29ad8..0000000 --- a/target/linux/atheros/base-files/etc/config/system +++ /dev/null @@ -1,23 +0,0 @@ -config system - option hostname OpenWrt - option timezone UTC - -config timeserver ntp - list server 0.openwrt.pool.ntp.org - list server 1.openwrt.pool.ntp.org - list server 2.openwrt.pool.ntp.org - list server 3.openwrt.pool.ntp.org - -config button - option button reset - option action released - option handler "logger reboot" - option min 0 - option max 4 - -config button - option button reset - option action released - option handler "logger factory default" - option min 5 - option max 30 diff --git a/target/linux/atheros/base-files/etc/hotplug.d/button/00-button b/target/linux/atheros/base-files/etc/hotplug.d/button/00-button deleted file mode 100644 index 63cc217..0000000 --- a/target/linux/atheros/base-files/etc/hotplug.d/button/00-button +++ /dev/null @@ -1,24 +0,0 @@ -. /lib/functions.sh -do_button () { - local button - local action - local handler - local min - local max - - config_get button $1 button - config_get action $1 action - config_get handler $1 handler - config_get min $1 min - config_get max $1 max - - [ "$ACTION" = "$action" -a "$BUTTON" = "$button" -a -n "$handler" ] && { - [ -z "$min" -o -z "$max" ] && eval $handler - [ -n "$min" -a -n "$max" ] && { - [ $min -le $SEEN -a $max -ge $SEEN ] && eval $handler - } - } -} - -config_load system -config_foreach do_button button diff --git a/target/linux/atheros/base-files/etc/uci-defaults/01_leds b/target/linux/atheros/base-files/etc/uci-defaults/01_leds deleted file mode 100644 index 076a04b..0000000 --- a/target/linux/atheros/base-files/etc/uci-defaults/01_leds +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh -# Copyright 2012 OpenWrt.org -# - -. /lib/functions/uci-defaults.sh - -ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0" - -ucidef_commit_leds - -exit 0 diff --git a/target/linux/atheros/base-files/etc/uci-defaults/02_network b/target/linux/atheros/base-files/etc/uci-defaults/02_network deleted file mode 100644 index 7e91e6a..0000000 --- a/target/linux/atheros/base-files/etc/uci-defaults/02_network +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/sh -if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \ - -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \ - [ -x /sbin/swconfig ]; -then - uci batch <<EOF -set network.eth0=switch -set network.eth0.name=eth0 -set network.eth0.reset=1 -set network.eth0.enable_vlan=1 -set network.eth0_1=switch_vlan -set network.eth0_1.device=eth0 -set network.eth0_1.vlan=1 -set network.eth0_1.ports="0 1 2 3 5t" -set network.eth0_2=switch_vlan -set network.eth0_2.device=eth0 -set network.eth0_2.vlan=2 -set network.eth0_2.ports="4 5t" -EOF - HAS_SWITCH=1 -fi - -if [ -n "$HAS_SWITCH" -o \ - -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ - -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then - uci batch <<EOF -set network.lan.ifname=eth0.1 -set network.wan=interface -set network.wan.ifname=eth0.2 -set network.wan.proto=dhcp -commit network -EOF - HAS_SWITCH=1 -fi - -[ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && { - uci batch <<EOF -set network.wan=interface -set network.wan.ifname=eth1 -set network.wan.proto=dhcp -commit network -EOF -} - -uci commit network diff --git a/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros deleted file mode 100644 index 434103e..0000000 --- a/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/sh - -# reset button only supported on ar5315+ at the moment -preinit_ip() { - if [ -z "$pi_ifname" ]; then - grep -q 'Atheros AR231[567]' /proc/cpuinfo && { - if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ - -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then - vconfig set_name_type DEV_PLUS_VID_NO_PAD - ifconfig eth0 up - vconfig add eth0 1 - ifname=eth0.1 - else - ifname=eth0 - fi - pi_ifname=$ifname - } - fi - [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { - ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up - } -} - - -# reset button only supported on ar5315+ at the moment - -preinit_ip_deconfig() { - if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ - -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then - vconfig rem eth0.1 2>/dev/null - ifconfig $pi_ifname down - elif [ -n "$pi_ifname" ]; then - ifconfig $pi_ifname 0.0.0.0 - fi -} diff --git a/target/linux/atheros/base-files/lib/upgrade/platform.sh b/target/linux/atheros/base-files/lib/upgrade/platform.sh deleted file mode 100644 index d44b8fa..0000000 --- a/target/linux/atheros/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,76 +0,0 @@ -CI_BLKSZ=65536 -CI_LDADR=0x80041000 - -platform_find_partitions() { - local first dev size erasesize name - while read dev size erasesize name; do - name=${name#'"'}; name=${name%'"'} - case "$name" in - vmlinux.bin.l7|kernel|linux|rootfs) - if [ -z "$first" ]; then - first="$name" - else - echo "$erasesize:$first:$name" - break - fi - ;; - esac - done < /proc/mtd -} - -platform_find_kernelpart() { - local part - for part in "${1%:*}" "${1#*:}"; do - case "$part" in - vmlinux.bin.l7|kernel|linux) - echo "$part" - break - ;; - esac - done -} - -platform_check_image() { - [ "$#" -gt 1 ] && return 1 - - case "$(get_magic_word "$1")" in - # Combined Image - 4349) - local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null) - local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}" - - if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then - return 0 - else - echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)" - return 1 - fi - ;; - *) - echo "Invalid image. Use combined .img files on this platform" - return 1 - ;; - esac -} - -platform_do_upgrade() { - local partitions=$(platform_find_partitions) - local kernelpart=$(platform_find_kernelpart "${partitions#*:}") - local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}" - local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) - local kern_blocks=$(($kern_length / $CI_BLKSZ)) - local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ)) - - if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \ - [ ${kern_blocks:-0} -gt 0 ] && \ - [ ${root_blocks:-0} -gt ${kern_blocks:-0} ] && \ - [ ${erase_size:-0} -gt 0 ]; - then - local append="" - [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR" - - ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \ - dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \ - mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions - fi -} |