diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-4.9/032-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-4.9/032-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/patches-4.9/032-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.9/032-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch new file mode 100644 index 0000000..93bf80c --- /dev/null +++ b/target/linux/bcm53xx/patches-4.9/032-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch @@ -0,0 +1,73 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217 +wireless chipsets. LEDs will be hopefully added later to the DT. +According to some sources it may use the same board as EA6400 and just +differ by an original vendor firmware. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++++++++++++++++++ + 2 files changed, 42 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-asus-rt-ac56u.dtb \ + bcm4708-asus-rt-ac68u.dtb \ + bcm4708-buffalo-wzr-1750dhp.dtb \ ++ bcm4708-linksys-ea6300-v1.dtb \ + bcm4708-luxul-xap-1510.dtb \ + bcm4708-luxul-xwc-1000.dtb \ + bcm4708-netgear-r6250.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +@@ -0,0 +1,41 @@ ++/* ++ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> ++ * ++ * Licensed under the ISC license. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4708.dtsi" ++#include "bcm5301x-nand-cs0-bch8.dtsi" ++ ++/ { ++ compatible = "linksys,ea6300-v1", "brcm,bcm4708"; ++ model = "Linksys EA6300 V1"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ wps { ++ label = "WPS"; ++ linux,code = <KEY_WPS_BUTTON>; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; ++ }; ++ ++ restart { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; |