summaryrefslogtreecommitdiff
path: root/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch')
-rw-r--r--target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch2581
1 files changed, 2581 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch b/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch
new file mode 100644
index 0000000..b76eaf4
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch
@@ -0,0 +1,2581 @@
+diff -urwN linux-3.10/drivers/mmc/card/block.c linux-rpi-3.10.y/drivers/mmc/card/block.c
+--- linux-3.10/drivers/mmc/card/block.c 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/card/block.c 2013-07-06 15:25:50.000000000 +0100
+@@ -1294,7 +1294,7 @@
+ brq->data.blocks = 1;
+ }
+
+- if (brq->data.blocks > 1 || do_rel_wr) {
++ if (brq->data.blocks > 1 || do_rel_wr || card->host->caps2 & MMC_CAP2_FORCE_MULTIBLOCK) {
+ /* SPI multiblock writes terminate using a special
+ * token, not a STOP_TRANSMISSION request.
+ */
+diff -urwN linux-3.10/drivers/mmc/core/sd.c linux-rpi-3.10.y/drivers/mmc/core/sd.c
+--- linux-3.10/drivers/mmc/core/sd.c 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/core/sd.c 2013-07-06 15:25:50.000000000 +0100
+@@ -13,6 +13,8 @@
+ #include <linux/err.h>
+ #include <linux/slab.h>
+ #include <linux/stat.h>
++#include <linux/jiffies.h>
++#include <linux/nmi.h>
+
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/card.h>
+@@ -58,6 +60,15 @@
+ __res & __mask; \
+ })
+
++// timeout for tries
++static const unsigned long retry_timeout_ms= 10*1000;
++
++// try at least 10 times, even if timeout is reached
++static const int retry_min_tries= 10;
++
++// delay between tries
++static const unsigned long retry_delay_ms= 10;
++
+ /*
+ * Given the decoded CSD structure, decode the raw CID to our CID structure.
+ */
+@@ -210,12 +221,62 @@
+ }
+
+ /*
+- * Fetch and process SD Status register.
++ * Fetch and process SD Configuration Register.
++ */
++static int mmc_read_scr(struct mmc_card *card)
++{
++ unsigned long timeout_at;
++ int err, tries;
++
++ timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms );
++ tries= 0;
++
++ while( tries < retry_min_tries || time_before( jiffies, timeout_at ) )
++ {
++ unsigned long delay_at;
++ tries++;
++
++ err = mmc_app_send_scr(card, card->raw_scr);
++ if( !err )
++ break; // success!!!
++
++ touch_nmi_watchdog(); // we are still alive!
++
++ // delay
++ delay_at= jiffies + msecs_to_jiffies( retry_delay_ms );
++ while( time_before( jiffies, delay_at ) )
++ {
++ mdelay( 1 );
++ touch_nmi_watchdog(); // we are still alive!
++ }
++ }
++
++ if( err)
++ {
++ pr_err("%s: failed to read SD Configuration register (SCR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err );
++ return err;
++ }
++
++ if( tries > 1 )
++ {
++ pr_info("%s: could read SD Configuration register (SCR) at the %dth attempt\n", mmc_hostname(card->host), tries );
++ }
++
++ err = mmc_decode_scr(card);
++ if (err)
++ return err;
++
++ return err;
++}
++
++/*
++ * Fetch and process SD Status Register.
+ */
+ static int mmc_read_ssr(struct mmc_card *card)
+ {
++ unsigned long timeout_at;
+ unsigned int au, es, et, eo;
+- int err, i;
++ int err, i, tries;
+ u32 *ssr;
+
+ if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
+@@ -228,14 +289,40 @@
+ if (!ssr)
+ return -ENOMEM;
+
++ timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms );
++ tries= 0;
++
++ while( tries < retry_min_tries || time_before( jiffies, timeout_at ) )
++ {
++ unsigned long delay_at;
++ tries++;
++
+ err = mmc_app_sd_status(card, ssr);
+- if (err) {
+- pr_warning("%s: problem reading SD Status "
+- "register.\n", mmc_hostname(card->host));
+- err = 0;
++ if( !err )
++ break; // sucess!!!
++
++ touch_nmi_watchdog(); // we are still alive!
++
++ // delay
++ delay_at= jiffies + msecs_to_jiffies( retry_delay_ms );
++ while( time_before( jiffies, delay_at ) )
++ {
++ mdelay( 1 );
++ touch_nmi_watchdog(); // we are still alive!
++ }
++ }
++
++ if( err)
++ {
++ pr_err("%s: failed to read SD Status register (SSR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err );
+ goto out;
+ }
+
++ if( tries > 1 )
++ {
++ pr_info("%s: read SD Status register (SSR) after %d attempts\n", mmc_hostname(card->host), tries );
++ }
++
+ for (i = 0; i < 16; i++)
+ ssr[i] = be32_to_cpu(ssr[i]);
+
+@@ -808,13 +895,9 @@
+
+ if (!reinit) {
+ /*
+- * Fetch SCR from card.
++ * Fetch and decode SD Configuration register.
+ */
+- err = mmc_app_send_scr(card, card->raw_scr);
+- if (err)
+- return err;
+-
+- err = mmc_decode_scr(card);
++ err = mmc_read_scr(card);
+ if (err)
+ return err;
+
+diff -urwN linux-3.10/drivers/mmc/host/Kconfig linux-rpi-3.10.y/drivers/mmc/host/Kconfig
+--- linux-3.10/drivers/mmc/host/Kconfig 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/Kconfig 2013-07-06 15:25:50.000000000 +0100
+@@ -249,6 +249,27 @@
+
+ YMMV.
+
++config MMC_SDHCI_BCM2708
++ tristate "SDHCI support on BCM2708"
++ depends on MMC_SDHCI && MACH_BCM2708
++ select MMC_SDHCI_IO_ACCESSORS
++ help
++ This selects the Secure Digital Host Controller Interface (SDHCI)
++ often referrered to as the eMMC block.
++
++ If you have a controller with this interface, say Y or M here.
++
++ If unsure, say N.
++
++config MMC_SDHCI_BCM2708_DMA
++ bool "DMA support on BCM2708 Arasan controller"
++ depends on MMC_SDHCI_BCM2708
++ help
++ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708
++ based chips.
++
++ If unsure, say N.
++
+ config MMC_SDHCI_BCM2835
+ tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
+ depends on ARCH_BCM2835
+diff -urwN linux-3.10/drivers/mmc/host/Makefile linux-rpi-3.10.y/drivers/mmc/host/Makefile
+--- linux-3.10/drivers/mmc/host/Makefile 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/Makefile 2013-07-06 15:25:50.000000000 +0100
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
+ obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
+ obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
++obj-$(CONFIG_MMC_SDHCI_BCM2708) += sdhci-bcm2708.o
+ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+diff -urwN linux-3.10/drivers/mmc/host/sdhci-bcm2708.c linux-rpi-3.10.y/drivers/mmc/host/sdhci-bcm2708.c
+--- linux-3.10/drivers/mmc/host/sdhci-bcm2708.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci-bcm2708.c 2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1420 @@
++/*
++ * sdhci-bcm2708.c Support for SDHCI device on BCM2708
++ * Copyright (c) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++/* Supports:
++ * SDHCI platform device - Arasan SD controller in BCM2708
++ *
++ * Inspired by sdhci-pci.c, by Pierre Ossman
++ */
++
++#include <linux/delay.h>
++#include <linux/highmem.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/sd.h>
++
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <mach/dma.h>
++
++#include "sdhci.h"
++
++/*****************************************************************************\
++ * *
++ * Configuration *
++ * *
++\*****************************************************************************/
++
++#define DRIVER_NAME "bcm2708_sdhci"
++
++/* for the time being insist on DMA mode - PIO seems not to work */
++#ifndef CONFIG_MMC_SDHCI_BCM2708_DMA
++#warning Non-DMA (PIO) version of this driver currently unavailable
++#endif
++#undef CONFIG_MMC_SDHCI_BCM2708_DMA
++#define CONFIG_MMC_SDHCI_BCM2708_DMA y
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++/* #define CHECK_DMA_USE */
++#endif
++//#define LOG_REGISTERS
++
++#define USE_SCHED_TIME
++#define USE_SPACED_WRITES_2CLK 1 /* space consecutive register writes */
++#define USE_SOFTWARE_TIMEOUTS 1 /* not hardware timeouts */
++#define SOFTWARE_ERASE_TIMEOUT_SEC 30
++
++#define SDHCI_BCM_DMA_CHAN 4 /* this default is normally overriden */
++#define SDHCI_BCM_DMA_WAITS 0 /* delays slowing DMA transfers: 0-31 */
++/* We are worried that SD card DMA use may be blocking the AXI bus for others */
++
++/*! TODO: obtain these from the physical address */
++#define DMA_SDHCI_BASE 0x7e300000 /* EMMC register block on Videocore */
++#define DMA_SDHCI_BUFFER (DMA_SDHCI_BASE + SDHCI_BUFFER)
++
++#define BCM2708_SDHCI_SLEEP_TIMEOUT 1000 /* msecs */
++
++/* Mhz clock that the EMMC core is running at. Should match the platform clockman settings */
++#define BCM2708_EMMC_CLOCK_FREQ 50000000
++
++#define REG_EXRDFIFO_EN 0x80
++#define REG_EXRDFIFO_CFG 0x84
++
++int cycle_delay=2;
++
++/*****************************************************************************\
++ * *
++ * Debug *
++ * *
++\*****************************************************************************/
++
++
++
++#define DBG(f, x...) \
++ pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
++// printk(KERN_INFO DRIVER_NAME " [%s()]: " f, __func__,## x)//GRAYG
++
++
++/*****************************************************************************\
++ * *
++ * High Precision Time *
++ * *
++\*****************************************************************************/
++
++#ifdef USE_SCHED_TIME
++
++#include <mach/frc.h>
++
++typedef unsigned long hptime_t;
++
++#define FMT_HPT "lu"
++
++static inline hptime_t hptime(void)
++{
++ return frc_clock_ticks32();
++}
++
++#define HPTIME_CLK_NS 1000ul
++
++#else
++
++typedef unsigned long hptime_t;
++
++#define FMT_HPT "lu"
++
++static inline hptime_t hptime(void)
++{
++ return jiffies;
++}
++
++#define HPTIME_CLK_NS (1000000000ul/HZ)
++
++#endif
++
++static inline unsigned long int since_ns(hptime_t t)
++{
++ return (unsigned long)((hptime() - t) * HPTIME_CLK_NS);
++}
++
++static bool allow_highspeed = 1;
++static int emmc_clock_freq = BCM2708_EMMC_CLOCK_FREQ;
++static bool sync_after_dma = 1;
++static bool missing_status = 1;
++static bool spurious_crc_acmd51 = 0;
++bool enable_llm = 1;
++bool extra_messages = 0;
++
++#if 0
++static void hptime_test(void)
++{
++ hptime_t now;
++ hptime_t later;
++
++ now = hptime();
++ msleep(10);
++ later = hptime();
++
++ printk(KERN_INFO DRIVER_NAME": 10ms = %"FMT_HPT" clks "
++ "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n",
++ later-now, now, later,
++ (unsigned long)(HPTIME_CLK_NS * (later - now)));
++
++ now = hptime();
++ msleep(1000);
++ later = hptime();
++
++ printk(KERN_INFO DRIVER_NAME": 1s = %"FMT_HPT" clks "
++ "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n",
++ later-now, now, later,
++ (unsigned long)(HPTIME_CLK_NS * (later - now)));
++}
++#endif
++
++/*****************************************************************************\
++ * *
++ * SDHCI core callbacks *
++ * *
++\*****************************************************************************/
++
++
++#ifdef CHECK_DMA_USE
++/*#define CHECK_DMA_REG_USE*/
++#endif
++
++#ifdef CHECK_DMA_REG_USE
++/* we don't expect anything to be using these registers during a
++ DMA (except the IRQ status) - so check */
++static void check_dma_reg_use(struct sdhci_host *host, int reg);
++#else
++#define check_dma_reg_use(host, reg)
++#endif
++
++
++static inline u32 sdhci_bcm2708_raw_readl(struct sdhci_host *host, int reg)
++{
++ return readl(host->ioaddr + reg);
++}
++
++u32 sdhci_bcm2708_readl(struct sdhci_host *host, int reg)
++{
++ u32 l = sdhci_bcm2708_raw_readl(host, reg);
++
++#ifdef LOG_REGISTERS
++ printk(KERN_ERR "%s: readl from 0x%02x, value 0x%08x\n",
++ mmc_hostname(host->mmc), reg, l);
++#endif
++ check_dma_reg_use(host, reg);
++
++ return l;
++}
++
++u16 sdhci_bcm2708_readw(struct sdhci_host *host, int reg)
++{
++ u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3);
++ u32 w = l >> (reg << 3 & 0x18) & 0xffff;
++
++#ifdef LOG_REGISTERS
++ printk(KERN_ERR "%s: readw from 0x%02x, value 0x%04x\n",
++ mmc_hostname(host->mmc), reg, w);
++#endif
++ check_dma_reg_use(host, reg);
++
++ return (u16)w;
++}
++
++u8 sdhci_bcm2708_readb(struct sdhci_host *host, int reg)
++{
++ u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3);
++ u32 b = l >> (reg << 3 & 0x18) & 0xff;
++
++#ifdef LOG_REGISTERS
++ printk(KERN_ERR "%s: readb from 0x%02x, value 0x%02x\n",
++ mmc_hostname(host->mmc), reg, b);
++#endif
++ check_dma_reg_use(host, reg);
++
++ return (u8)b;
++}
++
++
++static void sdhci_bcm2708_raw_writel(struct sdhci_host *host, u32 val, int reg)
++{
++ u32 ier;
++
++#if USE_SPACED_WRITES_2CLK
++ static bool timeout_disabled = false;
++ unsigned int ns_2clk = 0;
++
++ /* The Arasan has a bugette whereby it may lose the content of
++ * successive writes to registers that are within two SD-card clock
++ * cycles of each other (a clock domain crossing problem).
++ * It seems, however, that the data register does not have this problem.
++ * (Which is just as well - otherwise we'd have to nobble the DMA engine
++ * too)
++ */
++ if (reg != SDHCI_BUFFER && host->clock != 0) {
++ /* host->clock is the clock freq in Hz */
++ static hptime_t last_write_hpt;
++ hptime_t now = hptime();
++ ns_2clk = cycle_delay*1000000/(host->clock/1000);
++
++ if (now == last_write_hpt || now == last_write_hpt+1) {
++ /* we can't guarantee any significant time has
++ * passed - we'll have to wait anyway ! */
++ ndelay(ns_2clk);
++ } else
++ {
++ /* we must have waited at least this many ns: */
++ unsigned int ns_wait = HPTIME_CLK_NS *
++ (last_write_hpt - now - 1);
++ if (ns_wait < ns_2clk)
++ ndelay(ns_2clk - ns_wait);
++ }
++ last_write_hpt = now;
++ }
++#if USE_SOFTWARE_TIMEOUTS
++ /* The Arasan is clocked for timeouts using the SD clock which is too
++ * fast for ERASE commands and causes issues. So we disable timeouts
++ * for ERASE */
++ if (host->cmd != NULL && host->cmd->opcode == MMC_ERASE &&
++ reg == (SDHCI_COMMAND & ~3)) {
++ mod_timer(&host->timer,
++ jiffies + SOFTWARE_ERASE_TIMEOUT_SEC * HZ);
++ ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
++ ier &= ~SDHCI_INT_DATA_TIMEOUT;
++ writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
++ timeout_disabled = true;
++ ndelay(ns_2clk);
++ } else if (timeout_disabled) {
++ ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
++ ier |= SDHCI_INT_DATA_TIMEOUT;
++ writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
++ timeout_disabled = false;
++ ndelay(ns_2clk);
++ }
++#endif
++ writel(val, host->ioaddr + reg);
++#else
++ void __iomem * regaddr = host->ioaddr + reg;
++
++ writel(val, regaddr);
++
++ if (reg != SDHCI_BUFFER && reg != SDHCI_INT_STATUS && host->clock != 0)
++ {
++ int timeout = 100000;
++ while (val != readl(regaddr) && --timeout > 0)
++ continue;
++
++ if (timeout <= 0)
++ printk(KERN_ERR "%s: writing 0x%X to reg 0x%X "
++ "always gives 0x%X\n",
++ mmc_hostname(host->mmc),
++ val, reg, readl(regaddr));
++ BUG_ON(timeout <= 0);
++ }
++#endif
++}
++
++
++void sdhci_bcm2708_writel(struct sdhci_host *host, u32 val, int reg)
++{
++#ifdef LOG_REGISTERS
++ printk(KERN_ERR "%s: writel to 0x%02x, value 0x%08x\n",
++ mmc_hostname(host->mmc), reg, val);
++#endif
++ check_dma_reg_use(host, reg);
++
++ sdhci_bcm2708_raw_writel(host, val, reg);
++}
++
++void sdhci_bcm2708_writew(struct sdhci_host *host, u16 val, int reg)
++{
++ static u32 shadow = 0;
++
++ u32 p = reg == SDHCI_COMMAND ? shadow :
++ sdhci_bcm2708_raw_readl(host, reg & ~3);
++ u32 s = reg << 3 & 0x18;
++ u32 l = val << s;
++ u32 m = 0xffff << s;
++
++#ifdef LOG_REGISTERS
++ printk(KERN_ERR "%s: writew to 0x%02x, value 0x%04x\n",
++ mmc_hostname(host->mmc), reg, val);
++#endif
++
++ if (reg == SDHCI_TRANSFER_MODE)
++ shadow = (p & ~m) | l;
++ else {
++ check_dma_reg_use(host, reg);
++ sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3);
++ }
++}
++
++void sdhci_bcm2708_writeb(struct sdhci_host *host, u8 val, int reg)
++{
++ u32 p = sdhci_bcm2708_raw_readl(host, reg & ~3);
++ u32 s = reg << 3 & 0x18;
++ u32 l = val << s;
++ u32 m = 0xff << s;
++
++#ifdef LOG_REGISTERS
++ printk(KERN_ERR "%s: writeb to 0x%02x, value 0x%02x\n",
++ mmc_hostname(host->mmc), reg, val);
++#endif
++
++ check_dma_reg_use(host, reg);
++ sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3);
++}
++
++static unsigned int sdhci_bcm2708_get_max_clock(struct sdhci_host *host)
++{
++ return emmc_clock_freq;
++}
++
++/*****************************************************************************\
++ * *
++ * DMA Operation *
++ * *
++\*****************************************************************************/
++
++struct sdhci_bcm2708_priv {
++ int dma_chan;
++ int dma_irq;
++ void __iomem *dma_chan_base;
++ struct bcm2708_dma_cb *cb_base; /* DMA control blocks */
++ dma_addr_t cb_handle;
++ /* tracking scatter gather progress */
++ unsigned sg_ix; /* scatter gather list index */
++ unsigned sg_done; /* bytes in current sg_ix done */
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ unsigned char dma_wanted; /* DMA transfer requested */
++ unsigned char dma_waits; /* wait states in DMAs */
++#ifdef CHECK_DMA_USE
++ unsigned char dmas_pending; /* no of unfinished DMAs */
++ hptime_t when_started;
++ hptime_t when_reset;
++ hptime_t when_stopped;
++#endif
++#endif
++ /* signalling the end of a transfer */
++ void (*complete)(struct sdhci_host *);
++};
++
++#define SDHCI_HOST_PRIV(host) \
++ (struct sdhci_bcm2708_priv *)((struct sdhci_host *)(host)+1)
++
++
++
++#ifdef CHECK_DMA_REG_USE
++static void check_dma_reg_use(struct sdhci_host *host, int reg)
++{
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ if (host_priv->dma_wanted && reg != SDHCI_INT_STATUS) {
++ printk(KERN_INFO"%s: accessing register 0x%x during DMA\n",
++ mmc_hostname(host->mmc), reg);
++ }
++}
++#endif
++
++
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++
++static void sdhci_clear_set_irqgen(struct sdhci_host *host, u32 clear, u32 set)
++{
++ u32 ier;
++
++ ier = sdhci_bcm2708_raw_readl(host, SDHCI_SIGNAL_ENABLE);
++ ier &= ~clear;
++ ier |= set;
++ /* change which requests generate IRQs - makes no difference to
++ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */
++ sdhci_bcm2708_raw_writel(host, ier, SDHCI_SIGNAL_ENABLE);
++}
++
++static void sdhci_signal_irqs(struct sdhci_host *host, u32 irqs)
++{
++ sdhci_clear_set_irqgen(host, 0, irqs);
++}
++
++static void sdhci_unsignal_irqs(struct sdhci_host *host, u32 irqs)
++{
++ sdhci_clear_set_irqgen(host, irqs, 0);
++}
++
++
++
++static void schci_bcm2708_cb_read(struct sdhci_bcm2708_priv *host,
++ int ix,
++ dma_addr_t dma_addr, unsigned len,
++ int /*bool*/ is_last)
++{
++ struct bcm2708_dma_cb *cb = &host->cb_base[ix];
++ unsigned char dmawaits = host->dma_waits;
++
++ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) |
++ BCM2708_DMA_WAITS(dmawaits) |
++ BCM2708_DMA_S_DREQ |
++ BCM2708_DMA_D_WIDTH |
++ BCM2708_DMA_D_INC;
++ cb->src = DMA_SDHCI_BUFFER; /* DATA register DMA address */
++ cb->dst = dma_addr;
++ cb->length = len;
++ cb->stride = 0;
++
++ if (is_last) {
++ cb->info |= BCM2708_DMA_INT_EN |
++ BCM2708_DMA_WAIT_RESP;
++ cb->next = 0;
++ } else
++ cb->next = host->cb_handle +
++ (ix+1)*sizeof(struct bcm2708_dma_cb);
++
++ cb->pad[0] = 0;
++ cb->pad[1] = 0;
++}
++
++static void schci_bcm2708_cb_write(struct sdhci_bcm2708_priv *host,
++ int ix,
++ dma_addr_t dma_addr, unsigned len,
++ int /*bool*/ is_last)
++{
++ struct bcm2708_dma_cb *cb = &host->cb_base[ix];
++ unsigned char dmawaits = host->dma_waits;
++
++ /* We can make arbitrarily large writes as long as we specify DREQ to
++ pace the delivery of bytes to the Arasan hardware */
++ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) |
++ BCM2708_DMA_WAITS(dmawaits) |
++ BCM2708_DMA_D_DREQ |
++ BCM2708_DMA_S_WIDTH |
++ BCM2708_DMA_S_INC;
++ cb->src = dma_addr;
++ cb->dst = DMA_SDHCI_BUFFER; /* DATA register DMA address */
++ cb->length = len;
++ cb->stride = 0;
++
++ if (is_last) {
++ cb->info |= BCM2708_DMA_INT_EN |
++ BCM2708_DMA_WAIT_RESP;
++ cb->next = 0;
++ } else
++ cb->next = host->cb_handle +
++ (ix+1)*sizeof(struct bcm2708_dma_cb);
++
++ cb->pad[0] = 0;
++ cb->pad[1] = 0;
++}
++
++
++static void schci_bcm2708_dma_go(struct sdhci_host *host)
++{
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ void __iomem *dma_chan_base = host_priv->dma_chan_base;
++
++ BUG_ON(host_priv->dma_wanted);
++#ifdef CHECK_DMA_USE
++ if (host_priv->dma_wanted)
++ printk(KERN_ERR "%s: DMA already in progress - "
++ "now %"FMT_HPT", last started %lu "
++ "reset %lu stopped %lu\n",
++ mmc_hostname(host->mmc),
++ hptime(), since_ns(host_priv->when_started),
++ since_ns(host_priv->when_reset),
++ since_ns(host_priv->when_stopped));
++ else if (host_priv->dmas_pending > 0)
++ printk(KERN_INFO "%s: note - new DMA when %d reset DMAs "
++ "already in progress - "
++ "now %"FMT_HPT", started %lu reset %lu stopped %lu\n",
++ mmc_hostname(host->mmc),
++ host_priv->dmas_pending,
++ hptime(), since_ns(host_priv->when_started),
++ since_ns(host_priv->when_reset),
++ since_ns(host_priv->when_stopped));
++ host_priv->dmas_pending += 1;
++ host_priv->when_started = hptime();
++#endif
++ host_priv->dma_wanted = 1;
++ DBG("PDMA go - base %p handle %08X\n", dma_chan_base,
++ host_priv->cb_handle);
++ bcm_dma_start(dma_chan_base, host_priv->cb_handle);
++}
++
++
++static void
++sdhci_platdma_read(struct sdhci_host *host, dma_addr_t dma_addr, size_t len)
++{
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++
++ DBG("PDMA to read %d bytes\n", len);
++ host_priv->sg_done += len;
++ schci_bcm2708_cb_read(host_priv, 0, dma_addr, len, 1/*TRUE*/);
++ schci_bcm2708_dma_go(host);
++}
++
++
++static void
++sdhci_platdma_write(struct sdhci_host *host, dma_addr_t dma_addr, size_t len)
++{
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++
++ DBG("PDMA to write %d bytes\n", len);
++ //BUG_ON(0 != (len & 0x1ff));
++
++ host_priv->sg_done += len;
++ schci_bcm2708_cb_write(host_priv, 0, dma_addr, len, 1/*TRUE*/);
++ schci_bcm2708_dma_go(host);
++}
++
++/*! space is avaiable to receive into or data is available to write
++ Platform DMA exported function
++*/
++void
++sdhci_bcm2708_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask,
++ void(*completion_callback)(struct sdhci_host *host))
++{
++ struct mmc_data *data = host->data;
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ int sg_ix;
++ size_t bytes;
++ dma_addr_t addr;
++
++ BUG_ON(NULL == data);
++ BUG_ON(0 == data->blksz);
++
++ host_priv->complete = completion_callback;
++
++ sg_ix = host_priv->sg_ix;
++ BUG_ON(sg_ix >= data->sg_len);
++
++ /* we can DMA blocks larger than blksz - it may hang the DMA
++ channel but we are its only user */
++ bytes = sg_dma_len(&data->sg[sg_ix]) - host_priv->sg_done;
++ addr = sg_dma_address(&data->sg[sg_ix]) + host_priv->sg_done;
++
++ if (bytes > 0) {
++ /* We're going to poll for read/write available state until
++ we finish this DMA
++ */
++
++ if (data->flags & MMC_DATA_READ) {
++ if (*ref_intmask & SDHCI_INT_DATA_AVAIL) {
++ sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
++ SDHCI_INT_SPACE_AVAIL);
++ sdhci_platdma_read(host, addr, bytes);
++ }
++ } else {
++ if (*ref_intmask & SDHCI_INT_SPACE_AVAIL) {
++ sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
++ SDHCI_INT_SPACE_AVAIL);
++ sdhci_platdma_write(host, addr, bytes);
++ }
++ }
++ }
++ /* else:
++ we have run out of bytes that need transferring (e.g. we may be in
++ the middle of the last DMA transfer), or
++ it is also possible that we've been called when another IRQ is
++ signalled, even though we've turned off signalling of our own IRQ */
++
++ *ref_intmask &= ~SDHCI_INT_DATA_END;
++ /* don't let the main sdhci driver act on this .. we'll deal with it
++ when we respond to the DMA - if one is currently in progress */
++}
++
++/* is it possible to DMA the given mmc_data structure?
++ Platform DMA exported function
++*/
++int /*bool*/
++sdhci_bcm2708_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data)
++{
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ int ok = bcm_sg_suitable_for_dma(data->sg, data->sg_len);
++
++ if (!ok)
++ DBG("Reverting to PIO - bad cache alignment\n");
++
++ else {
++ host_priv->sg_ix = 0; /* first SG index */
++ host_priv->sg_done = 0; /* no bytes done */
++ }
++
++ return ok;
++}
++
++#include <mach/arm_control.h> //GRAYG
++/*! the current SD transacton has been abandonned
++ We need to tidy up if we were in the middle of a DMA
++ Platform DMA exported function
++*/
++void
++sdhci_bcm2708_platdma_reset(struct sdhci_host *host, struct mmc_data *data)
++{
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++// unsigned long flags;
++
++ BUG_ON(NULL == host);
++
++// spin_lock_irqsave(&host->lock, flags);
++
++ if (host_priv->dma_wanted) {
++ if (NULL == data) {
++ printk(KERN_ERR "%s: ongoing DMA reset - no data!\n",
++ mmc_hostname(host->mmc));
++ BUG_ON(NULL == data);
++ } else {
++ struct scatterlist *sg;
++ int sg_len;
++ int sg_todo;
++ int rc;
++ unsigned long cs;
++
++ sg = data->sg;
++ sg_len = data->sg_len;
++ sg_todo = sg_dma_len(&sg[host_priv->sg_ix]);
++
++ cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++ if (!(BCM2708_DMA_ACTIVE & cs))
++ {
++ if (extra_messages)
++ printk(KERN_INFO "%s: missed completion of "
++ "cmd %d DMA (%d/%d [%d]/[%d]) - "
++ "ignoring it\n",
++ mmc_hostname(host->mmc),
++ host->last_cmdop,
++ host_priv->sg_done, sg_todo,
++ host_priv->sg_ix+1, sg_len);
++ }
++ else
++ printk(KERN_INFO "%s: resetting ongoing cmd %d"
++ "DMA before %d/%d [%d]/[%d] complete\n",
++ mmc_hostname(host->mmc),
++ host->last_cmdop,
++ host_priv->sg_done, sg_todo,
++ host_priv->sg_ix+1, sg_len);
++#ifdef CHECK_DMA_USE
++ printk(KERN_INFO "%s: now %"FMT_HPT" started %lu "
++ "last reset %lu last stopped %lu\n",
++ mmc_hostname(host->mmc),
++ hptime(), since_ns(host_priv->when_started),
++ since_ns(host_priv->when_reset),
++ since_ns(host_priv->when_stopped));
++ { unsigned long info, debug;
++ void __iomem *base;
++ unsigned long pend0, pend1, pend2;
++
++ base = host_priv->dma_chan_base;
++ cs = readl(base + BCM2708_DMA_CS);
++ info = readl(base + BCM2708_DMA_INFO);
++ debug = readl(base + BCM2708_DMA_DEBUG);
++ printk(KERN_INFO "%s: DMA%d CS=%08lX TI=%08lX "
++ "DEBUG=%08lX\n",
++ mmc_hostname(host->mmc),
++ host_priv->dma_chan,
++ cs, info, debug);
++ pend0 = readl(__io_address(ARM_IRQ_PEND0));
++ pend1 = readl(__io_address(ARM_IRQ_PEND1));
++ pend2 = readl(__io_address(ARM_IRQ_PEND2));
++
++ printk(KERN_INFO "%s: PEND0=%08lX "
++ "PEND1=%08lX PEND2=%08lX\n",
++ mmc_hostname(host->mmc),
++ pend0, pend1, pend2);
++
++ //gintsts = readl(__io_address(GINTSTS));
++ //gintmsk = readl(__io_address(GINTMSK));
++ //printk(KERN_INFO "%s: USB GINTSTS=%08lX"
++ // "GINTMSK=%08lX\n",
++ // mmc_hostname(host->mmc), gintsts, gintmsk);
++ }
++#endif
++ rc = bcm_dma_abort(host_priv->dma_chan_base);
++ BUG_ON(rc != 0);
++ }
++ host_priv->dma_wanted = 0;
++#ifdef CHECK_DMA_USE
++ host_priv->when_reset = hptime();
++#endif
++ }
++
++// spin_unlock_irqrestore(&host->lock, flags);
++}
++
++
++static void sdhci_bcm2708_dma_complete_irq(struct sdhci_host *host,
++ u32 dma_cs)
++{
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ struct mmc_data *data;
++ struct scatterlist *sg;
++ int sg_len;
++ int sg_ix;
++ int sg_todo;
++// unsigned long flags;
++
++ BUG_ON(NULL == host);
++
++// spin_lock_irqsave(&host->lock, flags);
++ data = host->data;
++
++#ifdef CHECK_DMA_USE
++ if (host_priv->dmas_pending <= 0)
++ DBG("on completion no DMA in progress - "
++ "now %"FMT_HPT" started %lu reset %lu stopped %lu\n",
++ hptime(), since_ns(host_priv->when_started),
++ since_ns(host_priv->when_reset),
++ since_ns(host_priv->when_stopped));
++ else if (host_priv->dmas_pending > 1)
++ DBG("still %d DMA in progress after completion - "
++ "now %"FMT_HPT" started %lu reset %lu stopped %lu\n",
++ host_priv->dmas_pending - 1,
++ hptime(), since_ns(host_priv->when_started),
++ since_ns(host_priv->when_reset),
++ since_ns(host_priv->when_stopped));
++ BUG_ON(host_priv->dmas_pending <= 0);
++ host_priv->dmas_pending -= 1;
++ host_priv->when_stopped = hptime();
++#endif
++ host_priv->dma_wanted = 0;
++
++ if (NULL == data) {
++ DBG("PDMA unused completion - status 0x%X\n", dma_cs);
++// spin_unlock_irqrestore(&host->lock, flags);
++ return;
++ }
++ sg = data->sg;
++ sg_len = data->sg_len;
++ sg_todo = sg_dma_len(&sg[host_priv->sg_ix]);
++
++ DBG("PDMA complete %d/%d [%d]/[%d]..\n",
++ host_priv->sg_done, sg_todo,
++ host_priv->sg_ix+1, sg_len);
++
++ BUG_ON(host_priv->sg_done > sg_todo);
++
++ if (host_priv->sg_done >= sg_todo) {
++ host_priv->sg_ix++;
++ host_priv->sg_done = 0;
++ }
++
++ sg_ix = host_priv->sg_ix;
++ if (sg_ix < sg_len) {
++ u32 irq_mask;
++ /* Set off next DMA if we've got the capacity */
++
++ if (data->flags & MMC_DATA_READ)
++ irq_mask = SDHCI_INT_DATA_AVAIL;
++ else
++ irq_mask = SDHCI_INT_SPACE_AVAIL;
++
++ /* We have to use the interrupt status register on the BCM2708
++ rather than the SDHCI_PRESENT_STATE register because latency
++ in the glue logic means that the information retrieved from
++ the latter is not always up-to-date w.r.t the DMA engine -
++ it may not indicate that a read or a write is ready yet */
++ if (sdhci_bcm2708_raw_readl(host, SDHCI_INT_STATUS) &
++ irq_mask) {
++ size_t bytes = sg_dma_len(&sg[sg_ix]) -
++ host_priv->sg_done;
++ dma_addr_t addr = sg_dma_address(&data->sg[sg_ix]) +
++ host_priv->sg_done;
++
++ /* acknowledge interrupt */
++ sdhci_bcm2708_raw_writel(host, irq_mask,
++ SDHCI_INT_STATUS);
++
++ BUG_ON(0 == bytes);
++
++ if (data->flags & MMC_DATA_READ)
++ sdhci_platdma_read(host, addr, bytes);
++ else
++ sdhci_platdma_write(host, addr, bytes);
++ } else {
++ DBG("PDMA - wait avail\n");
++ /* may generate an IRQ if already present */
++ sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL |
++ SDHCI_INT_SPACE_AVAIL);
++ }
++ } else {
++ if (sync_after_dma) {
++ /* On the Arasan controller the stop command (which will be
++ scheduled after this completes) does not seem to work
++ properly if we allow it to be issued when we are
++ transferring data to/from the SD card.
++ We get CRC and DEND errors unless we wait for
++ the SD controller to finish reading/writing to the card. */
++ u32 state_mask;
++ int timeout=30*5000;
++
++ DBG("PDMA over - sync card\n");
++ if (data->flags & MMC_DATA_READ)
++ state_mask = SDHCI_DOING_READ;
++ else
++ state_mask = SDHCI_DOING_WRITE;
++
++ while (0 != (sdhci_bcm2708_raw_readl(host, SDHCI_PRESENT_STATE)
++ & state_mask) && --timeout > 0)
++ {
++ udelay(1);
++ continue;
++ }
++ if (timeout <= 0)
++ printk(KERN_ERR"%s: final %s to SD card still "
++ "running\n",
++ mmc_hostname(host->mmc),
++ data->flags & MMC_DATA_READ? "read": "write");
++ }
++ if (host_priv->complete) {
++ (*host_priv->complete)(host);
++ DBG("PDMA %s complete\n",
++ data->flags & MMC_DATA_READ?"read":"write");
++ sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL |
++ SDHCI_INT_SPACE_AVAIL);
++ }
++ }
++// spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static irqreturn_t sdhci_bcm2708_dma_irq(int irq, void *dev_id)
++{
++ irqreturn_t result = IRQ_NONE;
++ struct sdhci_host *host = dev_id;
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ u32 dma_cs; /* control and status register */
++
++ BUG_ON(NULL == dev_id);
++ BUG_ON(NULL == host_priv->dma_chan_base);
++
++ sdhci_spin_lock(host);
++
++ dma_cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++ if (dma_cs & BCM2708_DMA_ERR) {
++ unsigned long debug;
++ debug = readl(host_priv->dma_chan_base +
++ BCM2708_DMA_DEBUG);
++ printk(KERN_ERR "%s: DMA error - CS %lX DEBUG %lX\n",
++ mmc_hostname(host->mmc), (unsigned long)dma_cs,
++ (unsigned long)debug);
++ /* reset error */
++ writel(debug, host_priv->dma_chan_base +
++ BCM2708_DMA_DEBUG);
++ }
++ if (dma_cs & BCM2708_DMA_INT) {
++ /* acknowledge interrupt */
++ writel(BCM2708_DMA_INT,
++ host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++ dsb(); /* ARM data synchronization (push) operation */
++
++ if (!host_priv->dma_wanted) {
++ /* ignore this interrupt - it was reset */
++ if (extra_messages)
++ printk(KERN_INFO "%s: DMA IRQ %X ignored - "
++ "results were reset\n",
++ mmc_hostname(host->mmc), dma_cs);
++#ifdef CHECK_DMA_USE
++ printk(KERN_INFO "%s: now %"FMT_HPT
++ " started %lu reset %lu stopped %lu\n",
++ mmc_hostname(host->mmc), hptime(),
++ since_ns(host_priv->when_started),
++ since_ns(host_priv->when_reset),
++ since_ns(host_priv->when_stopped));
++ host_priv->dmas_pending--;
++#endif
++ } else
++ sdhci_bcm2708_dma_complete_irq(host, dma_cs);
++
++ result = IRQ_HANDLED;
++ }
++ sdhci_spin_unlock(host);
++
++ return result;
++}
++#endif /* CONFIG_MMC_SDHCI_BCM2708_DMA */
++
++
++/***************************************************************************** \
++ * *
++ * Device Attributes *
++ * *
++\*****************************************************************************/
++
++
++/**
++ * Show the DMA-using status
++ */
++static ssize_t attr_dma_show(struct device *_dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++ if (host) {
++ int use_dma = (host->flags & SDHCI_USE_PLATDMA? 1:0);
++ return sprintf(buf, "%d\n", use_dma);
++ } else
++ return -EINVAL;
++}
++
++/**
++ * Set the DMA-using status
++ */
++static ssize_t attr_dma_store(struct device *_dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++ if (host) {
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ int on = simple_strtol(buf, NULL, 0);
++ if (on) {
++ host->flags |= SDHCI_USE_PLATDMA;
++ sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
++ printk(KERN_INFO "%s: DMA enabled\n",
++ mmc_hostname(host->mmc));
++ } else {
++ host->flags &= ~(SDHCI_USE_PLATDMA | SDHCI_REQ_USE_DMA);
++ sdhci_bcm2708_writel(host, 0, REG_EXRDFIFO_EN);
++ printk(KERN_INFO "%s: DMA disabled\n",
++ mmc_hostname(host->mmc));
++ }
++#endif
++ return count;
++ } else
++ return -EINVAL;
++}
++
++static DEVICE_ATTR(use_dma, S_IRUGO | S_IWUGO, attr_dma_show, attr_dma_store);
++
++
++/**
++ * Show the DMA wait states used
++ */
++static ssize_t attr_dmawait_show(struct device *_dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++ if (host) {
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ int dmawait = host_priv->dma_waits;
++ return sprintf(buf, "%d\n", dmawait);
++ } else
++ return -EINVAL;
++}
++
++/**
++ * Set the DMA wait state used
++ */
++static ssize_t attr_dmawait_store(struct device *_dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++ if (host) {
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ int dma_waits = simple_strtol(buf, NULL, 0);
++ if (dma_waits >= 0 && dma_waits < 32)
++ host_priv->dma_waits = dma_waits;
++ else
++ printk(KERN_ERR "%s: illegal dma_waits value - %d",
++ mmc_hostname(host->mmc), dma_waits);
++#endif
++ return count;
++ } else
++ return -EINVAL;
++}
++
++static DEVICE_ATTR(dma_wait, S_IRUGO | S_IWUGO,
++ attr_dmawait_show, attr_dmawait_store);
++
++
++/**
++ * Show the DMA-using status
++ */
++static ssize_t attr_status_show(struct device *_dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++ if (host) {
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ return sprintf(buf,
++ "present: yes\n"
++ "power: %s\n"
++ "clock: %u Hz\n"
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ "dma: %s (%d waits)\n",
++#else
++ "dma: unconfigured\n",
++#endif
++ "always on",
++ host->clock
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ , (host->flags & SDHCI_USE_PLATDMA)? "on": "off"
++ , host_priv->dma_waits
++#endif
++ );
++ } else
++ return -EINVAL;
++}
++
++static DEVICE_ATTR(status, S_IRUGO, attr_status_show, NULL);
++
++/***************************************************************************** \
++ * *
++ * Power Management *
++ * *
++\*****************************************************************************/
++
++
++#ifdef CONFIG_PM
++static int sdhci_bcm2708_suspend(struct platform_device *dev, pm_message_t state)
++{
++ struct sdhci_host *host = (struct sdhci_host *)
++ platform_get_drvdata(dev);
++ int ret = 0;
++
++ if (host->mmc) {
++ ret = mmc_suspend_host(host->mmc);
++ }
++
++ return ret;
++}
++
++static int sdhci_bcm2708_resume(struct platform_device *dev)
++{
++ struct sdhci_host *host = (struct sdhci_host *)
++ platform_get_drvdata(dev);
++ int ret = 0;
++
++ if (host->mmc) {
++ ret = mmc_resume_host(host->mmc);
++ }
++
++ return ret;
++}
++#endif
++
++
++/*****************************************************************************\
++ * *
++ * Device quirk functions. Implemented as local ops because the flags *
++ * field is out of space with newer kernels. This implementation can be *
++ * back ported to older kernels as well. *
++\****************************************************************************/
++static unsigned int sdhci_bcm2708_quirk_extra_ints(struct sdhci_host *host)
++{
++ return 1;
++}
++
++static unsigned int sdhci_bcm2708_quirk_spurious_crc_acmd51(struct sdhci_host *host)
++{
++ return 1;
++}
++
++static unsigned int sdhci_bcm2708_quirk_voltage_broken(struct sdhci_host *host)
++{
++ return 1;
++}
++
++static unsigned int sdhci_bcm2708_uhs_broken(struct sdhci_host *host)
++{
++ return 1;
++}
++
++static unsigned int sdhci_bcm2708_missing_status(struct sdhci_host *host)
++{
++ return 1;
++}
++
++/***************************************************************************** \
++ * *
++ * Device ops *
++ * *
++\*****************************************************************************/
++
++static struct sdhci_ops sdhci_bcm2708_ops = {
++#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
++ .read_l = sdhci_bcm2708_readl,
++ .read_w = sdhci_bcm2708_readw,
++ .read_b = sdhci_bcm2708_readb,
++ .write_l = sdhci_bcm2708_writel,
++ .write_w = sdhci_bcm2708_writew,
++ .write_b = sdhci_bcm2708_writeb,
++#else
++#error The BCM2708 SDHCI driver needs CONFIG_MMC_SDHCI_IO_ACCESSORS to be set
++#endif
++ .get_max_clock = sdhci_bcm2708_get_max_clock,
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ // Platform DMA operations
++ .pdma_able = sdhci_bcm2708_platdma_dmaable,
++ .pdma_avail = sdhci_bcm2708_platdma_avail,
++ .pdma_reset = sdhci_bcm2708_platdma_reset,
++#endif
++ .extra_ints = sdhci_bcm2708_quirk_extra_ints,
++ .voltage_broken = sdhci_bcm2708_quirk_voltage_broken,
++ .uhs_broken = sdhci_bcm2708_uhs_broken,
++};
++
++/*****************************************************************************\
++ * *
++ * Device probing/removal *
++ * *
++\*****************************************************************************/
++
++static int sdhci_bcm2708_probe(struct platform_device *pdev)
++{
++ struct sdhci_host *host;
++ struct resource *iomem;
++ struct sdhci_bcm2708_priv *host_priv;
++ int ret;
++
++ BUG_ON(pdev == NULL);
++
++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!iomem) {
++ ret = -ENOMEM;
++ goto err;
++ }
++
++ if (resource_size(iomem) != 0x100)
++ dev_err(&pdev->dev, "Invalid iomem size. You may "
++ "experience problems.\n");
++
++ if (pdev->dev.parent)
++ host = sdhci_alloc_host(pdev->dev.parent,
++ sizeof(struct sdhci_bcm2708_priv));
++ else
++ host = sdhci_alloc_host(&pdev->dev,
++ sizeof(struct sdhci_bcm2708_priv));
++
++ if (IS_ERR(host)) {
++ ret = PTR_ERR(host);
++ goto err;
++ }
++ if (missing_status) {
++ sdhci_bcm2708_ops.missing_status = sdhci_bcm2708_missing_status;
++ }
++
++ if( spurious_crc_acmd51 ) {
++ sdhci_bcm2708_ops.spurious_crc_acmd51 = sdhci_bcm2708_quirk_spurious_crc_acmd51;
++ }
++
++
++ printk("sdhci: %s low-latency mode\n",enable_llm?"Enable":"Disable");
++
++ host->hw_name = "BCM2708_Arasan";
++ host->ops = &sdhci_bcm2708_ops;
++ host->irq = platform_get_irq(pdev, 0);
++ host->second_irq = 0;
++
++ host->quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
++ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
++ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
++ SDHCI_QUIRK_MISSING_CAPS |
++ SDHCI_QUIRK_NO_HISPD_BIT |
++ (sync_after_dma ? 0:SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12);
++
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ host->flags = SDHCI_USE_PLATDMA;
++#endif
++
++ if (!request_mem_region(iomem->start, resource_size(iomem),
++ mmc_hostname(host->mmc))) {
++ dev_err(&pdev->dev, "cannot request region\n");
++ ret = -EBUSY;
++ goto err_request;
++ }
++
++ host->ioaddr = ioremap(iomem->start, resource_size(iomem));
++ if (!host->ioaddr) {
++ dev_err(&pdev->dev, "failed to remap registers\n");
++ ret = -ENOMEM;
++ goto err_remap;
++ }
++
++ host_priv = SDHCI_HOST_PRIV(host);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ host_priv->dma_wanted = 0;
++#ifdef CHECK_DMA_USE
++ host_priv->dmas_pending = 0;
++ host_priv->when_started = 0;
++ host_priv->when_reset = 0;
++ host_priv->when_stopped = 0;
++#endif
++ host_priv->sg_ix = 0;
++ host_priv->sg_done = 0;
++ host_priv->complete = NULL;
++ host_priv->dma_waits = SDHCI_BCM_DMA_WAITS;
++
++ host_priv->cb_base = dma_alloc_writecombine(&pdev->dev, SZ_4K,
++ &host_priv->cb_handle,
++ GFP_KERNEL);
++ if (!host_priv->cb_base) {
++ dev_err(&pdev->dev, "cannot allocate DMA CBs\n");
++ ret = -ENOMEM;
++ goto err_alloc_cb;
++ }
++
++ ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST,
++ &host_priv->dma_chan_base,
++ &host_priv->dma_irq);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "couldn't allocate a DMA channel\n");
++ goto err_add_dma;
++ }
++ host_priv->dma_chan = ret;
++
++ ret = request_irq(host_priv->dma_irq, sdhci_bcm2708_dma_irq,0,//IRQF_SHARED,
++ DRIVER_NAME " (dma)", host);
++ if (ret) {
++ dev_err(&pdev->dev, "cannot set DMA IRQ\n");
++ goto err_add_dma_irq;
++ }
++ host->second_irq = host_priv->dma_irq;
++ DBG("DMA CBs %p handle %08X DMA%d %p DMA IRQ %d\n",
++ host_priv->cb_base, (unsigned)host_priv->cb_handle,
++ host_priv->dma_chan, host_priv->dma_chan_base,
++ host_priv->dma_irq);
++
++ if (allow_highspeed)
++ host->mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
++
++ /* single block writes cause data loss with some SD cards! */
++ host->mmc->caps2 |= MMC_CAP2_FORCE_MULTIBLOCK;
++#endif
++
++ ret = sdhci_add_host(host);
++ if (ret)
++ goto err_add_host;
++
++ platform_set_drvdata(pdev, host);
++ ret = device_create_file(&pdev->dev, &dev_attr_use_dma);
++ ret = device_create_file(&pdev->dev, &dev_attr_dma_wait);
++ ret = device_create_file(&pdev->dev, &dev_attr_status);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ /* enable extension fifo for paced DMA transfers */
++ sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
++ sdhci_bcm2708_writel(host, 4, REG_EXRDFIFO_CFG);
++#endif
++
++ printk(KERN_INFO "%s: BCM2708 SDHC host at 0x%08llx DMA %d IRQ %d\n",
++ mmc_hostname(host->mmc), (unsigned long long)iomem->start,
++ host_priv->dma_chan, host_priv->dma_irq);
++
++ return 0;
++
++err_add_host:
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ free_irq(host_priv->dma_irq, host);
++err_add_dma_irq:
++ bcm_dma_chan_free(host_priv->dma_chan);
++err_add_dma:
++ dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base,
++ host_priv->cb_handle);
++err_alloc_cb:
++#endif
++ iounmap(host->ioaddr);
++err_remap:
++ release_mem_region(iomem->start, resource_size(iomem));
++err_request:
++ sdhci_free_host(host);
++err:
++ dev_err(&pdev->dev, "probe failed, err %d\n", ret);
++ return ret;
++}
++
++static int sdhci_bcm2708_remove(struct platform_device *pdev)
++{
++ struct sdhci_host *host = platform_get_drvdata(pdev);
++ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++ int dead;
++ u32 scratch;
++
++ dead = 0;
++ scratch = sdhci_bcm2708_readl(host, SDHCI_INT_STATUS);
++ if (scratch == (u32)-1)
++ dead = 1;
++
++ device_remove_file(&pdev->dev, &dev_attr_status);
++ device_remove_file(&pdev->dev, &dev_attr_dma_wait);
++ device_remove_file(&pdev->dev, &dev_attr_use_dma);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++ free_irq(host_priv->dma_irq, host);
++ dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base,
++ host_priv->cb_handle);
++#endif
++ sdhci_remove_host(host, dead);
++ iounmap(host->ioaddr);
++ release_mem_region(iomem->start, resource_size(iomem));
++ sdhci_free_host(host);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver sdhci_bcm2708_driver = {
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ },
++ .probe = sdhci_bcm2708_probe,
++ .remove = sdhci_bcm2708_remove,
++
++#ifdef CONFIG_PM
++ .suspend = sdhci_bcm2708_suspend,
++ .resume = sdhci_bcm2708_resume,
++#endif
++
++};
++
++/*****************************************************************************\
++ * *
++ * Driver init/exit *
++ * *
++\*****************************************************************************/
++
++static int __init sdhci_drv_init(void)
++{
++ return platform_driver_register(&sdhci_bcm2708_driver);
++}
++
++static void __exit sdhci_drv_exit(void)
++{
++ platform_driver_unregister(&sdhci_bcm2708_driver);
++}
++
++module_init(sdhci_drv_init);
++module_exit(sdhci_drv_exit);
++
++module_param(allow_highspeed, bool, 0444);
++module_param(emmc_clock_freq, int, 0444);
++module_param(sync_after_dma, bool, 0444);
++module_param(missing_status, bool, 0444);
++module_param(spurious_crc_acmd51, bool, 0444);
++module_param(enable_llm, bool, 0444);
++module_param(cycle_delay, int, 0444);
++module_param(extra_messages, bool, 0444);
++
++MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
++MODULE_AUTHOR("Broadcom <info@broadcom.com>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:"DRIVER_NAME);
++
++MODULE_PARM_DESC(allow_highspeed, "Allow high speed transfers modes");
++MODULE_PARM_DESC(emmc_clock_freq, "Specify the speed of emmc clock");
++MODULE_PARM_DESC(sync_after_dma, "Block in driver until dma complete");
++MODULE_PARM_DESC(missing_status, "Use the missing status quirk");
++MODULE_PARM_DESC(spurious_crc_acmd51, "Use the spurious crc quirk for reading SCR (ACMD51)");
++MODULE_PARM_DESC(enable_llm, "Enable low-latency mode");
++MODULE_PARM_DESC(extra_messages, "Enable more sdcard warning messages");
++
++
+diff -urwN linux-3.10/drivers/mmc/host/sdhci.c linux-rpi-3.10.y/drivers/mmc/host/sdhci.c
+--- linux-3.10/drivers/mmc/host/sdhci.c 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci.c 2013-07-06 15:25:50.000000000 +0100
+@@ -28,6 +28,7 @@
+ #include <linux/mmc/mmc.h>
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/card.h>
++#include <linux/mmc/sd.h>
+ #include <linux/mmc/slot-gpio.h>
+
+ #include "sdhci.h"
+@@ -123,6 +124,91 @@
+ * Low level functions *
+ * *
+ \*****************************************************************************/
++extern bool enable_llm;
++static int sdhci_locked=0;
++void sdhci_spin_lock(struct sdhci_host *host)
++{
++ spin_lock(&host->lock);
++#ifdef CONFIG_PREEMPT
++ if(enable_llm)
++ {
++ disable_irq_nosync(host->irq);
++ if(host->second_irq)
++ disable_irq_nosync(host->second_irq);
++ local_irq_enable();
++ }
++#endif
++}
++
++void sdhci_spin_unlock(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++ if(enable_llm)
++ {
++ local_irq_disable();
++ if(host->second_irq)
++ enable_irq(host->second_irq);
++ enable_irq(host->irq);
++ }
++#endif
++ spin_unlock(&host->lock);
++}
++
++void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags)
++{
++#ifdef CONFIG_PREEMPT
++ if(enable_llm)
++ {
++ while(sdhci_locked)
++ {
++ preempt_schedule();
++ }
++ spin_lock_irqsave(&host->lock,*flags);
++ disable_irq(host->irq);
++ if(host->second_irq)
++ disable_irq(host->second_irq);
++ local_irq_enable();
++ }
++ else
++#endif
++ spin_lock_irqsave(&host->lock,*flags);
++}
++
++void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags)
++{
++#ifdef CONFIG_PREEMPT
++ if(enable_llm)
++ {
++ local_irq_disable();
++ if(host->second_irq)
++ enable_irq(host->second_irq);
++ enable_irq(host->irq);
++ }
++#endif
++ spin_unlock_irqrestore(&host->lock,flags);
++}
++
++static void sdhci_spin_enable_schedule(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++ if(enable_llm)
++ {
++ sdhci_locked = 1;
++ preempt_enable();
++ }
++#endif
++}
++
++static void sdhci_spin_disable_schedule(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++ if(enable_llm)
++ {
++ preempt_disable();
++ sdhci_locked = 0;
++ }
++#endif
++}
+
+ static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+ {
+@@ -288,7 +374,7 @@
+ struct sdhci_host *host = container_of(led, struct sdhci_host, led);
+ unsigned long flags;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ if (host->runtime_suspended)
+ goto out;
+@@ -298,7 +384,7 @@
+ else
+ sdhci_activate_led(host);
+ out:
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ #endif
+
+@@ -315,7 +401,7 @@
+ u32 uninitialized_var(scratch);
+ u8 *buf;
+
+- DBG("PIO reading\n");
++ DBG("PIO reading %db\n", host->data->blksz);
+
+ blksize = host->data->blksz;
+ chunk = 0;
+@@ -360,7 +446,7 @@
+ u32 scratch;
+ u8 *buf;
+
+- DBG("PIO writing\n");
++ DBG("PIO writing %db\n", host->data->blksz);
+
+ blksize = host->data->blksz;
+ chunk = 0;
+@@ -399,19 +485,28 @@
+ local_irq_restore(flags);
+ }
+
+-static void sdhci_transfer_pio(struct sdhci_host *host)
++static void sdhci_transfer_pio(struct sdhci_host *host, u32 intstate)
+ {
+ u32 mask;
++ u32 state = 0;
++ u32 intmask;
++ int available;
+
+ BUG_ON(!host->data);
+
+ if (host->blocks == 0)
+ return;
+
+- if (host->data->flags & MMC_DATA_READ)
++ if (host->data->flags & MMC_DATA_READ) {
+ mask = SDHCI_DATA_AVAILABLE;
+- else
++ intmask = SDHCI_INT_DATA_AVAIL;
++ } else {
+ mask = SDHCI_SPACE_AVAILABLE;
++ intmask = SDHCI_INT_SPACE_AVAIL;
++ }
++
++ /* initially we can see whether we can procede using intstate */
++ available = (intstate & intmask);
+
+ /*
+ * Some controllers (JMicron JMB38x) mess up the buffer bits
+@@ -422,7 +517,7 @@
+ (host->data->blocks == 1))
+ mask = ~0;
+
+- while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
++ while (available) {
+ if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
+ udelay(100);
+
+@@ -434,9 +529,11 @@
+ host->blocks--;
+ if (host->blocks == 0)
+ break;
++ state = sdhci_readl(host, SDHCI_PRESENT_STATE);
++ available = state & mask;
+ }
+
+- DBG("PIO transfer complete.\n");
++ DBG("PIO transfer complete - %d blocks left.\n", host->blocks);
+ }
+
+ static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
+@@ -709,7 +806,9 @@
+ u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
+ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
+
+- if (host->flags & SDHCI_REQ_USE_DMA)
++ /* platform DMA will begin on receipt of PIO irqs */
++ if ((host->flags & SDHCI_REQ_USE_DMA) &&
++ !(host->flags & SDHCI_USE_PLATDMA))
+ sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
+ else
+ sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
+@@ -741,44 +840,25 @@
+ host->data_early = 0;
+ host->data->bytes_xfered = 0;
+
+- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | SDHCI_USE_PLATDMA))
+ host->flags |= SDHCI_REQ_USE_DMA;
+
+ /*
+ * FIXME: This doesn't account for merging when mapping the
+ * scatterlist.
+ */
+- if (host->flags & SDHCI_REQ_USE_DMA) {
+- int broken, i;
+- struct scatterlist *sg;
+-
+- broken = 0;
+- if (host->flags & SDHCI_USE_ADMA) {
+- if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+- broken = 1;
+- } else {
+- if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
+- broken = 1;
+- }
+-
+- if (unlikely(broken)) {
+- for_each_sg(data->sg, sg, data->sg_len, i) {
+- if (sg->length & 0x3) {
+- DBG("Reverting to PIO because of "
+- "transfer size (%d)\n",
+- sg->length);
+- host->flags &= ~SDHCI_REQ_USE_DMA;
+- break;
+- }
+- }
+- }
+- }
+
+ /*
+ * The assumption here being that alignment is the same after
+ * translation to device address space.
+ */
+- if (host->flags & SDHCI_REQ_USE_DMA) {
++ if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) ==
++ (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) {
++
++ if (! sdhci_platdma_dmaable(host, data))
++ host->flags &= ~SDHCI_REQ_USE_DMA;
++
++ } else if (host->flags & SDHCI_REQ_USE_DMA) {
+ int broken, i;
+ struct scatterlist *sg;
+
+@@ -837,7 +917,8 @@
+ */
+ WARN_ON(1);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+- } else {
++ } else
++ if (!(host->flags & SDHCI_USE_PLATDMA)) {
+ WARN_ON(sg_cnt != 1);
+ sdhci_writel(host, sg_dma_address(data->sg),
+ SDHCI_DMA_ADDRESS);
+@@ -853,11 +934,13 @@
+ if (host->version >= SDHCI_SPEC_200) {
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
++ if (! (host->flags & SDHCI_USE_PLATDMA)) {
+ if ((host->flags & SDHCI_REQ_USE_DMA) &&
+ (host->flags & SDHCI_USE_ADMA))
+ ctrl |= SDHCI_CTRL_ADMA32;
+ else
+ ctrl |= SDHCI_CTRL_SDMA;
++ }
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
+
+@@ -909,7 +992,8 @@
+
+ if (data->flags & MMC_DATA_READ)
+ mode |= SDHCI_TRNS_READ;
+- if (host->flags & SDHCI_REQ_USE_DMA)
++ if ((host->flags & SDHCI_REQ_USE_DMA) &&
++ !(host->flags & SDHCI_USE_PLATDMA))
+ mode |= SDHCI_TRNS_DMA;
+
+ sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
+@@ -925,13 +1009,16 @@
+ host->data = NULL;
+
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+- if (host->flags & SDHCI_USE_ADMA)
+- sdhci_adma_table_post(host, data);
+- else {
++ /* we may have to abandon an ongoing platform DMA */
++ if (host->flags & SDHCI_USE_PLATDMA)
++ sdhci_platdma_reset(host, data);
++
++ if (host->flags & (SDHCI_USE_PLATDMA | SDHCI_USE_SDMA)) {
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, (data->flags & MMC_DATA_READ) ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE);
+- }
++ } else if (host->flags & SDHCI_USE_ADMA)
++ sdhci_adma_table_post(host, data);
+ }
+
+ /*
+@@ -984,6 +1071,12 @@
+ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+ mask |= SDHCI_DATA_INHIBIT;
+
++ if(host->ops->missing_status && (cmd->opcode == MMC_SEND_STATUS)) {
++ timeout = 5000; // Really obscenely large delay to send the status, due to bug in controller
++ // which might cause the STATUS command to get stuck when a data operation is in flow
++ mask |= SDHCI_DATA_INHIBIT;
++ }
++
+ /* We shouldn't wait for data inihibit for stop commands, even
+ though they might use busy signaling */
+ if (host->mrq->data && (cmd == host->mrq->data->stop))
+@@ -999,12 +1092,20 @@
+ return;
+ }
+ timeout--;
++ sdhci_spin_enable_schedule(host);
+ mdelay(1);
++ sdhci_spin_disable_schedule(host);
+ }
++ DBG("send cmd %d - wait 0x%X irq 0x%x\n", cmd->opcode, mask,
++ sdhci_readl(host, SDHCI_INT_STATUS));
+
+ mod_timer(&host->timer, jiffies + 10 * HZ);
+
+ host->cmd = cmd;
++ if (host->last_cmdop == MMC_APP_CMD)
++ host->last_cmdop = -cmd->opcode;
++ else
++ host->last_cmdop = cmd->opcode;
+
+ sdhci_prepare_data(host, cmd);
+
+@@ -1220,7 +1321,9 @@
+ return;
+ }
+ timeout--;
++ sdhci_spin_enable_schedule(host);
+ mdelay(1);
++ sdhci_spin_disable_schedule(host);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+@@ -1316,7 +1419,7 @@
+
+ sdhci_runtime_pm_get(host);
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ WARN_ON(host->mrq != NULL);
+
+@@ -1374,9 +1477,9 @@
+ mmc->card->type == MMC_TYPE_MMC ?
+ MMC_SEND_TUNING_BLOCK_HS200 :
+ MMC_SEND_TUNING_BLOCK;
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ sdhci_execute_tuning(mmc, tuning_opcode);
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ /* Restore original mmc_request structure */
+ host->mrq = mrq;
+@@ -1390,7 +1493,7 @@
+ }
+
+ mmiowb();
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+
+ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
+@@ -1399,10 +1502,10 @@
+ int vdd_bit = -1;
+ u8 ctrl;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ if (host->flags & SDHCI_DEVICE_DEAD) {
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
+ mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
+ return;
+@@ -1429,9 +1532,9 @@
+ vdd_bit = sdhci_set_power(host, ios->vdd);
+
+ if (host->vmmc && vdd_bit != -1) {
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit);
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+ }
+
+ if (host->ops->platform_send_init_74_clocks)
+@@ -1470,7 +1573,7 @@
+ else
+ ctrl &= ~SDHCI_CTRL_HISPD;
+
+- if (host->version >= SDHCI_SPEC_300) {
++ if (host->version >= SDHCI_SPEC_300 && !(host->ops->uhs_broken)) {
+ u16 clk, ctrl_2;
+
+ /* In case of UHS-I modes, set High Speed Enable */
+@@ -1569,7 +1672,7 @@
+ sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+
+ mmiowb();
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+
+ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+@@ -1617,7 +1720,7 @@
+ unsigned long flags;
+ int is_readonly;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ is_readonly = 0;
+@@ -1627,7 +1730,7 @@
+ is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
+ & SDHCI_WRITE_PROTECT);
+
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+
+ /* This quirk needs to be replaced by a callback-function later */
+ return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
+@@ -1700,9 +1803,9 @@
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+ sdhci_enable_sdio_irq_nolock(host, enable);
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+
+ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
+@@ -2046,7 +2149,7 @@
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ /* Check host->mrq first in case we are runtime suspended */
+ if (host->mrq &&
+@@ -2063,7 +2166,7 @@
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+
+ static const struct mmc_host_ops sdhci_ops = {
+@@ -2102,14 +2205,14 @@
+
+ host = (struct sdhci_host*)param;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ /*
+ * If this tasklet gets rescheduled while running, it will
+ * be run again afterwards but without any active request.
+ */
+ if (!host->mrq) {
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ return;
+ }
+
+@@ -2147,7 +2250,7 @@
+ #endif
+
+ mmiowb();
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+
+ mmc_request_done(host->mmc, mrq);
+ sdhci_runtime_pm_put(host);
+@@ -2160,11 +2263,11 @@
+
+ host = (struct sdhci_host*)data;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ if (host->mrq) {
+ pr_err("%s: Timeout waiting for hardware "
+- "interrupt.\n", mmc_hostname(host->mmc));
++ "interrupt - cmd%d.\n", mmc_hostname(host->mmc), host->last_cmdop);
+ sdhci_dumpregs(host);
+
+ if (host->data) {
+@@ -2181,7 +2284,7 @@
+ }
+
+ mmiowb();
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+
+ static void sdhci_tuning_timer(unsigned long data)
+@@ -2191,11 +2294,11 @@
+
+ host = (struct sdhci_host *)data;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ host->flags |= SDHCI_NEEDS_RETUNING;
+
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+
+ /*****************************************************************************\
+@@ -2209,10 +2312,13 @@
+ BUG_ON(intmask == 0);
+
+ if (!host->cmd) {
++ if (!(host->ops->extra_ints)) {
+ pr_err("%s: Got command interrupt 0x%08x even "
+ "though no command operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
+ sdhci_dumpregs(host);
++ } else
++ DBG("cmd irq 0x%08x cmd complete\n", (unsigned)intmask);
+ return;
+ }
+
+@@ -2282,6 +2388,19 @@
+ static void sdhci_show_adma_error(struct sdhci_host *host) { }
+ #endif
+
++static void sdhci_data_end(struct sdhci_host *host)
++{
++ if (host->cmd) {
++ /*
++ * Data managed to finish before the
++ * command completed. Make sure we do
++ * things in the proper order.
++ */
++ host->data_early = 1;
++ } else
++ sdhci_finish_data(host);
++}
++
+ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
+ {
+ u32 command;
+@@ -2311,23 +2430,39 @@
+ }
+ }
+
++ if (!(host->ops->extra_ints)) {
+ pr_err("%s: Got data interrupt 0x%08x even "
+ "though no data operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
+ sdhci_dumpregs(host);
++ } else
++ DBG("data irq 0x%08x but no data\n", (unsigned)intmask);
+
+ return;
+ }
+
+ if (intmask & SDHCI_INT_DATA_TIMEOUT)
+ host->data->error = -ETIMEDOUT;
+- else if (intmask & SDHCI_INT_DATA_END_BIT)
++ else if (intmask & SDHCI_INT_DATA_END_BIT) {
++ DBG("end error in cmd %d\n", host->last_cmdop);
++ if (host->ops->spurious_crc_acmd51 &&
++ host->last_cmdop == -SD_APP_SEND_SCR) {
++ DBG("ignoring spurious data_end_bit error\n");
++ intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END;
++ } else
+ host->data->error = -EILSEQ;
+- else if ((intmask & SDHCI_INT_DATA_CRC) &&
++ } else if ((intmask & SDHCI_INT_DATA_CRC) &&
+ SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
+- != MMC_BUS_TEST_R)
++ != MMC_BUS_TEST_R) {
++ DBG("crc error in cmd %d\n", host->last_cmdop);
++ if (host->ops->spurious_crc_acmd51 &&
++ host->last_cmdop == -SD_APP_SEND_SCR) {
++ DBG("ignoring spurious data_crc_bit error\n");
++ intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END;
++ } else {
+ host->data->error = -EILSEQ;
+- else if (intmask & SDHCI_INT_ADMA_ERROR) {
++ }
++ } else if (intmask & SDHCI_INT_ADMA_ERROR) {
+ pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
+ sdhci_show_adma_error(host);
+ host->data->error = -EIO;
+@@ -2335,11 +2470,18 @@
+ host->ops->adma_workaround(host, intmask);
+ }
+
+- if (host->data->error)
++ if (host->data->error) {
++ DBG("finish request early on error %d\n", host->data->error);
+ sdhci_finish_data(host);
+- else {
+- if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
+- sdhci_transfer_pio(host);
++ } else {
++ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) {
++ if (host->flags & SDHCI_REQ_USE_DMA) {
++ /* possible only in PLATDMA mode */
++ sdhci_platdma_avail(host, &intmask,
++ &sdhci_data_end);
++ } else
++ sdhci_transfer_pio(host, intmask);
++ }
+
+ /*
+ * We currently don't do anything fancy with DMA
+@@ -2368,18 +2510,8 @@
+ sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+ }
+
+- if (intmask & SDHCI_INT_DATA_END) {
+- if (host->cmd) {
+- /*
+- * Data managed to finish before the
+- * command completed. Make sure we do
+- * things in the proper order.
+- */
+- host->data_early = 1;
+- } else {
+- sdhci_finish_data(host);
+- }
+- }
++ if (intmask & SDHCI_INT_DATA_END)
++ sdhci_data_end(host);
+ }
+ }
+
+@@ -2390,10 +2522,10 @@
+ u32 intmask, unexpected = 0;
+ int cardint = 0, max_loops = 16;
+
+- spin_lock(&host->lock);
++ sdhci_spin_lock(host);
+
+ if (host->runtime_suspended) {
+- spin_unlock(&host->lock);
++ sdhci_spin_unlock(host);
+ pr_warning("%s: got irq while runtime suspended\n",
+ mmc_hostname(host->mmc));
+ return IRQ_HANDLED;
+@@ -2435,6 +2567,22 @@
+ tasklet_schedule(&host->card_tasklet);
+ }
+
++ if (intmask & SDHCI_INT_ERROR_MASK & ~SDHCI_INT_ERROR)
++ DBG("controller reports error 0x%x -"
++ "%s%s%s%s%s%s%s%s%s%s",
++ intmask,
++ intmask & SDHCI_INT_TIMEOUT? " timeout": "",
++ intmask & SDHCI_INT_CRC ? " crc": "",
++ intmask & SDHCI_INT_END_BIT? " endbit": "",
++ intmask & SDHCI_INT_INDEX? " index": "",
++ intmask & SDHCI_INT_DATA_TIMEOUT? " data_timeout": "",
++ intmask & SDHCI_INT_DATA_CRC? " data_crc": "",
++ intmask & SDHCI_INT_DATA_END_BIT? " data_endbit": "",
++ intmask & SDHCI_INT_BUS_POWER? " buspower": "",
++ intmask & SDHCI_INT_ACMD12ERR? " acmd12": "",
++ intmask & SDHCI_INT_ADMA_ERROR? " adma": ""
++ );
++
+ if (intmask & SDHCI_INT_CMD_MASK) {
+ sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
+ SDHCI_INT_STATUS);
+@@ -2449,7 +2597,13 @@
+
+ intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
+
+- intmask &= ~SDHCI_INT_ERROR;
++ if (intmask & SDHCI_INT_ERROR_MASK) {
++ /* collect any uncovered errors */
++ sdhci_writel(host, intmask & SDHCI_INT_ERROR_MASK,
++ SDHCI_INT_STATUS);
++ }
++
++ intmask &= ~SDHCI_INT_ERROR_MASK;
+
+ if (intmask & SDHCI_INT_BUS_POWER) {
+ pr_err("%s: Card is consuming too much power!\n",
+@@ -2475,7 +2629,7 @@
+ if (intmask && --max_loops)
+ goto again;
+ out:
+- spin_unlock(&host->lock);
++ sdhci_spin_unlock(host);
+
+ if (unexpected) {
+ pr_err("%s: Unexpected interrupt 0x%08x.\n",
+@@ -2569,7 +2723,8 @@
+ {
+ int ret;
+
+- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA |
++ SDHCI_USE_PLATDMA)) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
+@@ -2636,15 +2791,15 @@
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+ }
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+ sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+
+ synchronize_irq(host->irq);
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+ host->runtime_suspended = true;
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+
+ return ret;
+ }
+@@ -2670,16 +2825,16 @@
+ sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
+ if ((host_flags & SDHCI_PV_ENABLED) &&
+ !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+ sdhci_enable_preset_value(host, true);
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+
+ /* Set the re-tuning expiration flag */
+ if (host->flags & SDHCI_USING_RETUNING_TIMER)
+ host->flags |= SDHCI_NEEDS_RETUNING;
+
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ host->runtime_suspended = false;
+
+@@ -2690,7 +2845,7 @@
+ /* Enable Card Detection */
+ sdhci_enable_card_detection(host);
+
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+
+ return ret;
+ }
+@@ -2785,14 +2940,16 @@
+ host->flags &= ~SDHCI_USE_ADMA;
+ }
+
+- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA |
++ SDHCI_USE_PLATDMA)) {
+ if (host->ops->enable_dma) {
+ if (host->ops->enable_dma(host)) {
+ pr_warning("%s: No suitable DMA "
+ "available. Falling back to PIO.\n",
+ mmc_hostname(mmc));
+ host->flags &=
+- ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
++ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA |
++ SDHCI_USE_PLATDMA);
+ }
+ }
+ }
+@@ -3080,6 +3237,12 @@
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+ }
+
++ if(host->ops->voltage_broken) {
++ ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
++ // Cannot support UHS modes if we are stuck at 3.3V;
++ mmc->caps &= ~(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50);
++ }
++
+ mmc->ocr_avail = ocr_avail;
+ mmc->ocr_avail_sdio = ocr_avail;
+ if (host->ocr_avail_sdio)
+@@ -3174,7 +3337,7 @@
+ host->tuning_timer.function = sdhci_tuning_timer;
+ }
+
+- ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
++ ret = request_irq(host->irq, sdhci_irq, 0,//IRQF_SHARED,
+ mmc_hostname(mmc), host);
+ if (ret) {
+ pr_err("%s: Failed to request IRQ %d: %d\n",
+@@ -3210,6 +3373,7 @@
+
+ pr_info("%s: SDHCI controller on %s [%s] using %s\n",
+ mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
++ (host->flags & SDHCI_USE_PLATDMA) ? "platform's DMA" :
+ (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
+
+@@ -3237,7 +3401,7 @@
+ unsigned long flags;
+
+ if (dead) {
+- spin_lock_irqsave(&host->lock, flags);
++ sdhci_spin_lock_irqsave(host, &flags);
+
+ host->flags |= SDHCI_DEVICE_DEAD;
+
+@@ -3249,7 +3413,7 @@
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+- spin_unlock_irqrestore(&host->lock, flags);
++ sdhci_spin_unlock_irqrestore(host, flags);
+ }
+
+ sdhci_disable_card_detection(host);
+diff -urwN linux-3.10/drivers/mmc/host/sdhci.h linux-rpi-3.10.y/drivers/mmc/host/sdhci.h
+--- linux-3.10/drivers/mmc/host/sdhci.h 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci.h 2013-07-06 15:25:50.000000000 +0100
+@@ -289,6 +289,20 @@
+ void (*platform_reset_enter)(struct sdhci_host *host, u8 mask);
+ void (*platform_reset_exit)(struct sdhci_host *host, u8 mask);
+ int (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
++
++ int (*pdma_able)(struct sdhci_host *host,
++ struct mmc_data *data);
++ void (*pdma_avail)(struct sdhci_host *host,
++ unsigned int *ref_intmask,
++ void(*complete)(struct sdhci_host *));
++ void (*pdma_reset)(struct sdhci_host *host,
++ struct mmc_data *data);
++ unsigned int (*extra_ints)(struct sdhci_host *host);
++ unsigned int (*spurious_crc_acmd51)(struct sdhci_host *host);
++ unsigned int (*voltage_broken)(struct sdhci_host *host);
++ unsigned int (*uhs_broken)(struct sdhci_host *host);
++ unsigned int (*missing_status)(struct sdhci_host *host);
++
+ void (*hw_reset)(struct sdhci_host *host);
+ void (*platform_suspend)(struct sdhci_host *host);
+ void (*platform_resume)(struct sdhci_host *host);
+@@ -399,9 +413,38 @@
+ extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
+ #endif
+
++static inline int /*bool*/
++sdhci_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data)
++{
++ if (host->ops->pdma_able)
++ return host->ops->pdma_able(host, data);
++ else
++ return 1;
++}
++static inline void
++sdhci_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask,
++ void(*completion_callback)(struct sdhci_host *))
++{
++ if (host->ops->pdma_avail)
++ host->ops->pdma_avail(host, ref_intmask, completion_callback);
++}
++
++static inline void
++sdhci_platdma_reset(struct sdhci_host *host, struct mmc_data *data)
++{
++ if (host->ops->pdma_reset)
++ host->ops->pdma_reset(host, data);
++}
++
+ #ifdef CONFIG_PM_RUNTIME
+ extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
+ extern int sdhci_runtime_resume_host(struct sdhci_host *host);
+ #endif
+
++extern void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags);
++extern void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags);
++extern void sdhci_spin_lock(struct sdhci_host *host);
++extern void sdhci_spin_unlock(struct sdhci_host *host);
++
++
+ #endif /* __SDHCI_HW_H */
+diff -urN linux-3.10/include/linux/mmc/host.h linux-rpi-3.10.y/include/linux/mmc/host.h
+--- linux-3.10/include/linux/mmc/host.h 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/include/linux/mmc/host.h 2013-07-06 15:25:50.000000000 +0100
+@@ -281,6 +281,7 @@
+ #define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \
+ MMC_CAP2_PACKED_WR)
+ #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */
++#define MMC_CAP2_FORCE_MULTIBLOCK (1 << 31) /* Always use multiblock transfers */
+
+ mmc_pm_flag_t pm_caps; /* supported pm features */
+
+diff -urN linux-3.10/include/linux/mmc/sdhci.h linux-rpi-3.10.y/include/linux/mmc/sdhci.h
+--- linux-3.10/include/linux/mmc/sdhci.h 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/include/linux/mmc/sdhci.h 2013-07-06 15:25:50.000000000 +0100
+@@ -97,6 +97,7 @@
+ #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
+
+ int irq; /* Device IRQ */
++ int second_irq; /* Additional IRQ to disable/enable in low-latency mode */
+ void __iomem *ioaddr; /* Mapped address */
+
+ const struct sdhci_ops *ops; /* Low level hw interface */
+@@ -128,6 +129,7 @@
+ #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
+ #define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */
+ #define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
++#define SDHCI_USE_PLATDMA (1<<12) /* Host uses 3rd party DMA */
+
+ unsigned int version; /* SDHCI spec. version */
+
+@@ -142,6 +144,7 @@
+
+ struct mmc_request *mrq; /* Current request */
+ struct mmc_command *cmd; /* Current command */
++ int last_cmdop; /* Opcode of last cmd sent */
+ struct mmc_data *data; /* Current data request */
+ unsigned int data_early:1; /* Data finished before cmd */
+